diff options
Diffstat (limited to 'drivers/net/tokenring/ibmtr.c')
| -rw-r--r-- | drivers/net/tokenring/ibmtr.c | 1964 |
1 files changed, 0 insertions, 1964 deletions
diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c deleted file mode 100644 index b5c8c18f504..00000000000 --- a/drivers/net/tokenring/ibmtr.c +++ /dev/null @@ -1,1964 +0,0 @@ -/* ibmtr.c: A shared-memory IBM Token Ring 16/4 driver for linux - * - * Written 1993 by Mark Swanson and Peter De Schrijver. - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - * This device driver should work with Any IBM Token Ring Card that does - * not use DMA. - * - * I used Donald Becker's (becker@scyld.com) device driver work - * as a base for most of my initial work. - * - * Changes by Peter De Schrijver - * (Peter.Deschrijver@linux.cc.kuleuven.ac.be) : - * - * + changed name to ibmtr.c in anticipation of other tr boards. - * + changed reset code and adapter open code. - * + added SAP open code. - * + a first attempt to write interrupt, transmit and receive routines. - * - * Changes by David W. Morris (dwm@shell.portal.com) : - * 941003 dwm: - Restructure tok_probe for multiple adapters, devices. - * + Add comments, misc reorg for clarity. - * + Flatten interrupt handler levels. - * - * Changes by Farzad Farid (farzy@zen.via.ecp.fr) - * and Pascal Andre (andre@chimay.via.ecp.fr) (March 9 1995) : - * + multi ring support clean up. - * + RFC1042 compliance enhanced. - * - * Changes by Pascal Andre (andre@chimay.via.ecp.fr) (September 7 1995) : - * + bug correction in tr_tx - * + removed redundant information display - * + some code reworking - * - * Changes by Michel Lespinasse (walken@via.ecp.fr), - * Yann Doussot (doussot@via.ecp.fr) and Pascal Andre (andre@via.ecp.fr) - * (February 18, 1996) : - * + modified shared memory and mmio access port the driver to - * alpha platform (structure access -> readb/writeb) - * - * Changes by Steve Kipisz (bungy@ibm.net or kipisz@vnet.ibm.com) - * (January 18 1996): - * + swapped WWOR and WWCR in ibmtr.h - * + moved some init code from tok_probe into trdev_init. The - * PCMCIA code can call trdev_init to complete initializing - * the driver. - * + added -DPCMCIA to support PCMCIA - * + detecting PCMCIA Card Removal in interrupt handler. If - * ISRP is FF, then a PCMCIA card has been removed - * 10/2000 Burt needed a new method to avoid crashing the OS - * - * Changes by Paul Norton (pnorton@cts.com) : - * + restructured the READ.LOG logic to prevent the transmit SRB - * from being rudely overwritten before the transmit cycle is - * complete. (August 15 1996) - * + completed multiple adapter support. (November 20 1996) - * + implemented csum_partial_copy in tr_rx and increased receive - * buffer size and count. Minor fixes. (March 15, 1997) - * - * Changes by Christopher Turcksin <wabbit@rtfc.demon.co.uk> - * + Now compiles ok as a module again. - * - * Changes by Paul Norton (pnorton@ieee.org) : - * + moved the header manipulation code in tr_tx and tr_rx to - * net/802/tr.c. (July 12 1997) - * + add retry and timeout on open if cable disconnected. (May 5 1998) - * + lifted 2000 byte mtu limit. now depends on shared-RAM size. - * May 25 1998) - * + can't allocate 2k recv buff at 8k shared-RAM. (20 October 1998) - * - * Changes by Joel Sloan (jjs@c-me.com) : - * + disable verbose debug messages by default - to enable verbose - * debugging, edit the IBMTR_DEBUG_MESSAGES define below - * - * Changes by Mike Phillips <phillim@amtrak.com> : - * + Added extra #ifdef's to work with new PCMCIA Token Ring Code. - * The PCMCIA code now just sets up the card so it can be recognized - * by ibmtr_probe. Also checks allocated memory vs. on-board memory - * for correct figure to use. - * - * Changes by Tim Hockin (thockin@isunix.it.ilstu.edu) : - * + added spinlocks for SMP sanity (10 March 1999) - * - * Changes by Jochen Friedrich to enable RFC1469 Option 2 multicasting - * i.e. using functional address C0 00 00 04 00 00 to transmit and - * receive multicast packets. - * - * Changes by Mike Sullivan (based on original sram patch by Dave Grothe - * to support windowing into on adapter shared ram. - * i.e. Use LANAID to setup a PnP configuration with 16K RAM. Paging - * will shift this 16K window over the entire available shared RAM. - * - * Changes by Peter De Schrijver (p2@mind.be) : - * + fixed a problem with PCMCIA card removal - * - * Change by Mike Sullivan et al.: - * + added turbo card support. No need to use lanaid to configure - * the adapter into isa compatibility mode. - * - * Changes by Burt Silverman to allow the computer to behave nicely when - * a cable is pulled or not in place, or a PCMCIA card is removed hot. - */ - -/* change the define of IBMTR_DEBUG_MESSAGES to a nonzero value -in the event that chatty debug messages are desired - jjs 12/30/98 */ - -#define IBMTR_DEBUG_MESSAGES 0 - -#include <linux/module.h> -#include <linux/sched.h> - -#ifdef PCMCIA /* required for ibmtr_cs.c to build */ -#undef MODULE /* yes, really */ -#undef ENABLE_PAGING -#else -#define ENABLE_PAGING 1 -#endif - -/* changes the output format of driver initialization */ -#define TR_VERBOSE 0 - -/* some 95 OS send many non UI frame; this allow removing the warning */ -#define TR_FILTERNONUI 1 - -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/netdevice.h> -#include <linux/ip.h> -#include <linux/trdevice.h> -#include <linux/ibmtr.h> - -#include <net/checksum.h> - -#include <asm/io.h> - -#define DPRINTK(format, args...) printk("%s: " format, dev->name , ## args) -#define DPRINTD(format, args...) DummyCall("%s: " format, dev->name , ## args) - -/* version and credits */ -#ifndef PCMCIA -static char version[] __devinitdata = - "\nibmtr.c: v1.3.57 8/ 7/94 Peter De Schrijver and Mark Swanson\n" - " v2.1.125 10/20/98 Paul Norton <pnorton@ieee.org>\n" - " v2.2.0 12/30/98 Joel Sloan <jjs@c-me.com>\n" - " v2.2.1 02/08/00 Mike Sullivan <sullivam@us.ibm.com>\n" - " v2.2.2 07/27/00 Burt Silverman <burts@us.ibm.com>\n" - " v2.4.0 03/01/01 Mike Sullivan <sullivan@us.ibm.com>\n"; -#endif - -/* this allows displaying full adapter information */ - -static char *channel_def[] __devinitdata = { "ISA", "MCA", "ISA P&P" }; - -static char pcchannelid[] __devinitdata = { - 0x05, 0x00, 0x04, 0x09, - 0x04, 0x03, 0x04, 0x0f, - 0x03, 0x06, 0x03, 0x01, - 0x03, 0x01, 0x03, 0x00, - 0x03, 0x09, 0x03, 0x09, - 0x03, 0x00, 0x02, 0x00 -}; - -static char mcchannelid[] __devinitdata = { - 0x04, 0x0d, 0x04, 0x01, - 0x05, 0x02, 0x05, 0x03, - 0x03, 0x06, 0x03, 0x03, - 0x05, 0x08, 0x03, 0x04, - 0x03, 0x05, 0x03, 0x01, - 0x03, 0x08, 0x02, 0x00 -}; - -static char __devinit *adapter_def(char type) -{ - switch (type) { - case 0xF: return "PC Adapter | PC Adapter II | Adapter/A"; - case 0xE: return "16/4 Adapter | 16/4 Adapter/A (long)"; - case 0xD: return "16/4 Adapter/A (short) | 16/4 ISA-16 Adapter"; - case 0xC: return "Auto 16/4 Adapter"; - default: return "adapter (unknown type)"; - } -}; - -#define TRC_INIT 0x01 /* Trace initialization & PROBEs */ -#define TRC_INITV 0x02 /* verbose init trace points */ -static unsigned char ibmtr_debug_trace = 0; - -static int ibmtr_probe1(struct net_device *dev, int ioaddr); -static unsigned char get_sram_size(struct tok_info *adapt_info); -static int trdev_init(struct net_device *dev); -static int tok_open(struct net_device *dev); -static int tok_init_card(struct net_device *dev); -static void tok_open_adapter(unsigned long dev_addr); -static void open_sap(unsigned char type, struct net_device *dev); -static void tok_set_multicast_list(struct net_device *dev); -static netdev_tx_t tok_send_packet(struct sk_buff *skb, - struct net_device *dev); -static int tok_close(struct net_device *dev); -static irqreturn_t tok_interrupt(int irq, void *dev_id); -static void initial_tok_int(struct net_device *dev); -static void tr_tx(struct net_device *dev); -static void tr_rx(struct net_device *dev); -static void ibmtr_reset_timer(struct timer_list*tmr,struct net_device *dev); -static void tok_rerun(unsigned long dev_addr); -static void ibmtr_readlog(struct net_device *dev); -static int ibmtr_change_mtu(struct net_device *dev, int mtu); -static void find_turbo_adapters(int *iolist); - -static int ibmtr_portlist[IBMTR_MAX_ADAPTERS+1] __devinitdata = { - 0xa20, 0xa24, 0, 0, 0 -}; -static int __devinitdata turbo_io[IBMTR_MAX_ADAPTERS] = {0}; -static int __devinitdata turbo_irq[IBMTR_MAX_ADAPTERS] = {0}; -static int __devinitdata turbo_searched = 0; - -#ifndef PCMCIA -static __u32 ibmtr_mem_base __devinitdata = 0xd0000; -#endif - -static void __devinit PrtChanID(char *pcid, short stride) -{ - short i, j; - for (i = 0, j = 0; i < 24; i++, j += stride) - printk("%1x", ((int) pcid[j]) & 0x0f); - printk("\n"); -} - -static void __devinit HWPrtChanID(void __iomem *pcid, short stride) -{ - short i, j; - for (i = 0, j = 0; i < 24; i++, j += stride) - printk("%1x", ((int) readb(pcid + j)) & 0x0f); - printk("\n"); -} - -/* We have to ioremap every checked address, because isa_readb is - * going away. - */ - -static void __devinit find_turbo_adapters(int *iolist) -{ - int ram_addr; - int index=0; - void __iomem *chanid; - int found_turbo=0; - unsigned char *tchanid, ctemp; - int i, j; - unsigned long jif; - void __iomem *ram_mapped ; - - if (turbo_searched == 1) return; - turbo_searched=1; - for (ram_addr=0xC0000; ram_addr < 0xE0000; ram_addr+=0x2000) { - - __u32 intf_tbl=0; - - found_turbo=1; - ram_mapped = ioremap((u32)ram_addr,0x1fff) ; - if (ram_mapped==NULL) - continue ; - chanid=(CHANNEL_ID + ram_mapped); - tchanid=pcchannelid; - ctemp=readb(chanid) & 0x0f; - if (ctemp != *tchanid) continue; - for (i=2,j=1; i<=46; i=i+2,j++) { - if ((readb(chanid+i) & 0x0f) != tchanid[j]){ - found_turbo=0; - break; - } - } - if (!found_turbo) continue; - - writeb(0x90, ram_mapped+0x1E01); - for(i=2; i<0x0f; i++) { - writeb(0x00, ram_mapped+0x1E01+i); - } - writeb(0x00, ram_mapped+0x1E01); - for(jif=jiffies+TR_BUSY_INTERVAL; time_before_eq(jiffies,jif);); - intf_tbl=ntohs(readw(ram_mapped+ACA_OFFSET+ACA_RW+WRBR_EVEN)); - if (intf_tbl) { -#if IBMTR_DEBUG_MESSAGES - printk("ibmtr::find_turbo_adapters, Turbo found at " - "ram_addr %x\n",ram_addr); - printk("ibmtr::find_turbo_adapters, interface_table "); - for(i=0; i<6; i++) { - printk("%x:",readb(ram_addr+intf_tbl+i)); - } - printk("\n"); -#endif - turbo_io[index]=ntohs(readw(ram_mapped+intf_tbl+4)); - turbo_irq[index]=readb(ram_mapped+intf_tbl+3); - outb(0, turbo_io[index] + ADAPTRESET); - for(jif=jiffies+TR_RST_TIME;time_before_eq(jiffies,jif);); - outb(0, turbo_io[index] + ADAPTRESETREL); - index++; - continue; - } -#if IBMTR_DEBUG_MESSAGES - printk("ibmtr::find_turbo_adapters, ibmtr card found at" - " %x but not a Turbo model\n",ram_addr); -#endif - iounmap(ram_mapped) ; - } /* for */ - for(i=0; i<IBMTR_MAX_ADAPTERS; i++) { - if(!turbo_io[i]) break; - for (j=0; j<IBMTR_MAX_ADAPTERS; j++) { - if ( iolist[j] && iolist[j] != turbo_io[i]) continue; - iolist[j]=turbo_io[i]; - break; - } - } -} - -static void ibmtr_cleanup_card(struct net_device *dev) -{ - if (dev->base_addr) { - outb(0,dev->base_addr+ADAPTRESET); - - schedule_timeout_uninterruptible(TR_RST_TIME); /* wait 50ms */ - - outb(0,dev->base_addr+ADAPTRESETREL); - } - -#ifndef PCMCIA - free_irq(dev->irq, dev); - release_region(dev->base_addr, IBMTR_IO_EXTENT); - - { - struct tok_info *ti = netdev_priv(dev); - iounmap(ti->mmio); - iounmap(ti->sram_virt); - } -#endif -} - -/**************************************************************************** - * ibmtr_probe(): Routine specified in the network device structure - * to probe for an IBM Token Ring Adapter. Routine outline: - * I. Interrogate hardware to determine if an adapter exists - * and what the speeds and feeds are - * II. Setup data structures to control execution based upon - * adapter characteristics. - * - * We expect ibmtr_probe to be called once for each device entry - * which references it. - ****************************************************************************/ - -static int __devinit ibmtr_probe(struct net_device *dev) -{ - int i; - int base_addr = dev->base_addr; - - if (base_addr && base_addr <= 0x1ff) /* Don't probe at all. */ - return -ENXIO; - if (base_addr > 0x1ff) { /* Check a single specified location. */ - if (!ibmtr_probe1(dev, base_addr)) return 0; - return -ENODEV; - } - find_turbo_adapters(ibmtr_portlist); - for (i = 0; ibmtr_portlist[i]; i++) { - int ioaddr = ibmtr_portlist[i]; - - if (!ibmtr_probe1(dev, ioaddr)) return 0; - } - return -ENODEV; -} - -int __devinit ibmtr_probe_card(struct net_device *dev) -{ - int err = ibmtr_probe(dev); - if (!err) { - err = register_netdev(dev); - if (err) - ibmtr_cleanup_card(dev); - } - return err; -} - -/*****************************************************************************/ - -static int __devinit ibmtr_probe1(struct net_device *dev, int PIOaddr) -{ - - unsigned char segment, intr=0, irq=0, i, j, cardpresent=NOTOK, temp=0; - void __iomem * t_mmio = NULL; - struct tok_info *ti = netdev_priv(dev); - void __iomem *cd_chanid; - unsigned char *tchanid, ctemp; -#ifndef PCMCIA - unsigned char t_irq=0; - unsigned long timeout; - static int version_printed; -#endif - - /* Query the adapter PIO base port which will return - * indication of where MMIO was placed. We also have a - * coded interrupt number. - */ - segment = inb(PIOaddr); - if (segment < 0x40 || segment > 0xe0) { - /* Out of range values so we'll assume non-existent IO device - * but this is not necessarily a problem, esp if a turbo - * adapter is being used. */ -#if IBMTR_DEBUG_MESSAGES - DPRINTK("ibmtr_probe1(): unhappy that inb(0x%X) == 0x%X, " - "Hardware Problem?\n",PIOaddr,segment); -#endif - return -ENODEV; - } - /* - * Compute the linear base address of the MMIO area - * as LINUX doesn't care about segments - */ - t_mmio = ioremap(((__u32) (segment & 0xfc) << 11) + 0x80000,2048); - if (!t_mmio) { - DPRINTK("Cannot remap mmiobase memory area") ; - return -ENODEV ; - } - intr = segment & 0x03; /* low bits is coded interrupt # */ - if (ibmtr_debug_trace & TRC_INIT) - DPRINTK("PIOaddr: %4hx seg/intr: %2x mmio base: %p intr: %d\n" - , PIOaddr, (int) segment, t_mmio, (int) intr); - - /* - * Now we will compare expected 'channelid' strings with - * what we is there to learn of ISA/MCA or not TR card - */ -#ifdef PCMCIA - iounmap(t_mmio); - t_mmio = ti->mmio; /*BMS to get virtual address */ - irq = ti->irq; /*BMS to display the irq! */ -#endif - cd_chanid = (CHANNEL_ID + t_mmio); /* for efficiency */ - tchanid = pcchannelid; - cardpresent = TR_ISA; /* try ISA */ - - /* Suboptimize knowing first byte different */ - ctemp = readb(cd_chanid) & 0x0f; - if (ctemp != *tchanid) { /* NOT ISA card, try MCA */ - tchanid = mcchannelid; - cardpresent = TR_MCA; - if (ctemp != *tchanid) /* Neither ISA nor MCA */ - cardpresent = NOTOK; - } - if (cardpresent != NOTOK) { - /* Know presumed type, try rest of ID */ - for (i = 2, j = 1; i <= 46; i = i + 2, j++) { - if( (readb(cd_chanid+i)&0x0f) == tchanid[j]) continue; - /* match failed, not TR card */ - cardpresent = NOTOK; - break; - } - } - /* - * If we have an ISA board check for the ISA P&P version, - * as it has different IRQ settings - */ - if (cardpresent == TR_ISA && (readb(AIPFID + t_mmio) == 0x0e)) - cardpresent = TR_ISAPNP; - if (cardpresent == NOTOK) { /* "channel_id" did not match, report */ - if (!(ibmtr_debug_trace & TRC_INIT)) { -#ifndef PCMCIA - iounmap(t_mmio); -#endif - return -ENODEV; - } - DPRINTK( "Channel ID string not found for PIOaddr: %4hx\n", - PIOaddr); - DPRINTK("Expected for ISA: "); - PrtChanID(pcchannelid, 1); - DPRINTK(" found: "); -/* BMS Note that this can be misleading, when hardware is flaky, because you - are reading it a second time here. So with my flaky hardware, I'll see my- - self in this block, with the HW ID matching the ISA ID exactly! */ - HWPrtChanID(cd_chanid, 2); - DPRINTK("Expected for MCA: "); - PrtChanID(mcchannelid, 1); - } - /* Now, setup some of the pl0 buffers for this driver.. */ - /* If called from PCMCIA, it is already set up, so no need to - waste the memory, just use the existing structure */ -#ifndef PCMCIA - ti->mmio = t_mmio; - for (i = 0; i < IBMTR_MAX_ADAPTERS; i++) { - if (turbo_io[i] != PIOaddr) - continue; -#if IBMTR_DEBUG_MESSAGES - printk("ibmtr::tr_probe1, setting PIOaddr %x to Turbo\n", - PIOaddr); -#endif - ti->turbo = 1; - t_irq = turbo_irq[i]; - } -#endif /* !PCMCIA */ - ti->readlog_pending = 0; - init_waitqueue_head(&ti->wait_for_reset); - - /* if PCMCIA, the card can be recognized as either TR_ISA or TR_ISAPNP - * depending which card is inserted. */ - -#ifndef PCMCIA - switch (cardpresent) { - case TR_ISA: - if (intr == 0) irq = 9; /* irq2 really is irq9 */ - if (intr == 1) irq = 3; - if (intr == 2) irq = 6; - if (intr == 3) irq = 7; - ti->adapter_int_enable = PIOaddr + ADAPTINTREL; - break; - case TR_MCA: - if (intr == 0) irq = 9; - if (intr == 1) irq = 3; - if (intr == 2) irq = 10; - if (intr == 3) irq = 11; - ti->global_int_enable = 0; - ti->adapter_int_enable = 0; - ti->sram_phys=(__u32)(inb(PIOaddr+ADAPTRESETREL) & 0xfe) << 12; - break; - case TR_ISAPNP: - if (!t_irq) { - if (intr == 0) irq = 9; - if (intr == 1) irq = 3; - if (intr == 2) irq = 10; - if (intr == 3) irq = 11; - } else - irq=t_irq; - timeout = jiffies + TR_SPIN_INTERVAL; - while (!readb(ti->mmio + ACA_OFFSET + ACA_RW + RRR_EVEN)){ - if (!time_after(jiffies, timeout)) continue; - DPRINTK( "Hardware timeout during initialization.\n"); - iounmap(t_mmio); - return -ENODEV; - } - ti->sram_phys = - ((__u32)readb(ti->mmio+ACA_OFFSET+ACA_RW+RRR_EVEN)<<12); - ti->adapter_int_enable = PIOaddr + ADAPTINTREL; - break; - } /*end switch (cardpresent) */ -#endif /*not PCMCIA */ - - if (ibmtr_debug_trace & TRC_INIT) { /* just report int */ - DPRINTK("irq=%d", irq); - printk(", sram_phys=0x%x", ti->sram_phys); - if(ibmtr_debug_trace&TRC_INITV){ /* full chat in verbose only */ - DPRINTK(", ti->mmio=%p", ti->mmio); - printk(", segment=%02X", segment); - } - printk(".\n"); - } - - /* Get hw address of token ring card */ - j = 0; - for (i = 0; i < 0x18; i = i + 2) { - /* technical reference states to do this */ - temp = readb(ti->mmio + AIP + i) & 0x0f; - ti->hw_address[j] = temp; - if (j & 1) - dev->dev_addr[(j / 2)] = - ti->hw_address[j]+ (ti->hw_address[j - 1] << 4); - ++j; - } - /* get Adapter type: 'F' = Adapter/A, 'E' = 16/4 Adapter II,... */ - ti->adapter_type = readb(ti->mmio + AIPADAPTYPE); - - /* get Data Rate: F=4Mb, E=16Mb, D=4Mb & 16Mb ?? */ - ti->data_rate = readb(ti->mmio + AIPDATARATE); - - /* Get Early Token Release support?: F=no, E=4Mb, D=16Mb, C=4&16Mb */ - ti->token_release = readb(ti->mmio + AIPEARLYTOKEN); - - /* How much shared RAM is on adapter ? */ - if (ti->turbo) { - ti->avail_shared_ram=127; - } else { - ti->avail_shared_ram = get_sram_size(ti);/*in 512 byte units */ - } - /* We need to set or do a bunch of work here based on previous results*/ - /* Support paging? What sizes?: F=no, E=16k, D=32k, C=16 & 32k */ - ti->shared_ram_paging = readb(ti->mmio + AIPSHRAMPAGE); - - /* Available DHB 4Mb size: F=2048, E=4096, D=4464 */ - switch (readb(ti->mmio + AIP4MBDHB)) { - case 0xe: ti->dhb_size4mb = 4096; break; - case 0xd: ti->dhb_size4mb = 4464; break; - default: ti->dhb_size4mb = 2048; break; - } - - /* Available DHB 16Mb size: F=2048, E=4096, D=8192, C=16384, B=17960 */ - switch (readb(ti->mmio + AIP16MBDHB)) { - case 0xe: ti->dhb_size16mb = 4096; break; - case 0xd: ti->dhb_size16mb = 8192; break; - case 0xc: ti->dhb_size16mb = 16384; break; - case 0xb: ti->dhb_size16mb = 17960; break; - default: ti->dhb_size16mb = 2048; break; - } - - /* We must figure out how much shared memory space this adapter - * will occupy so that if there are two adapters we can fit both - * in. Given a choice, we will limit this adapter to 32K. The - * maximum space will will use for two adapters is 64K so if the - * adapter we are working on demands 64K (it also doesn't support - * paging), then only one adapter can be supported. - */ - - /* - * determine how much of total RAM is mapped into PC space - */ - ti->mapped_ram_size= /*sixteen to onehundredtwentyeight 512byte blocks*/ - 1<< ((readb(ti->mmio+ACA_OFFSET+ACA_RW+RRR_ODD) >> 2 & 0x03) + 4); - ti->page_mask = 0; - if (ti->turbo) ti->page_mask=0xf0; - else if (ti->shared_ram_paging == 0xf); /* No paging in adapter */ - else { -#ifdef ENABLE_PAGING - unsigned char pg_size = 0; - /* BMS: page size: PCMCIA, use configuration register; - ISAPNP, use LANAIDC config tool from www.ibm.com */ - switch (ti->shared_ram_paging) { - case 0xf: - break; - case 0xe: - ti->page_mask = (ti->mapped_ram_size == 32) ? 0xc0 : 0; - pg_size = 32; /* 16KB page size */ - break; - case 0xd: - ti->page_mask = (ti->mapped_ram_size == 64) ? 0x80 : 0; - pg_size = 64; /* 32KB page size */ - break; - case 0xc: - switch (ti->mapped_ram_size) { - case 32: - ti->page_mask = 0xc0; - pg_size = 32; - break; - case 64: - ti->page_mask = 0x80; - pg_size = 64; - break; - } - break; - default: - DPRINTK("Unknown shared ram paging info %01X\n", - ti->shared_ram_paging); - iounmap(t_mmio); - return -ENODEV; - break; - } /*end switch shared_ram_paging */ - - if (ibmtr_debug_trace & TRC_INIT) - DPRINTK("Shared RAM paging code: %02X, " - "mapped RAM size: %dK, shared RAM size: %dK, " - "page mask: %02X\n:", - ti->shared_ram_paging, ti->mapped_ram_size / 2, - ti->avail_shared_ram / 2, ti->page_mask); -#endif /*ENABLE_PAGING */ - } - -#ifndef PCMCIA - /* finish figuring the shared RAM address */ - if (cardpresent == TR_ISA) { - static const __u32 ram_bndry_mask[] = { - 0xffffe000, 0xffffc000, 0xffff8000, 0xffff0000 - }; - __u32 new_base, rrr_32, chk_base, rbm; - - rrr_32=readb(ti->mmio+ACA_OFFSET+ACA_RW+RRR_ODD) >> 2 & 0x03; - rbm = ram_bndry_mask[rrr_32]; - new_base = (ibmtr_mem_base + (~rbm)) & rbm;/* up to boundary */ - chk_base = new_base + (ti->mapped_ram_size << 9); - if (chk_base > (ibmtr_mem_base + IBMTR_SHARED_RAM_SIZE)) { - DPRINTK("Shared RAM for this adapter (%05x) exceeds " - "driver limit (%05x), adapter not started.\n", - chk_base, ibmtr_mem_base + IBMTR_SHARED_RAM_SIZE); - iounmap(t_mmio); - return -ENODEV; - } else { /* seems cool, record what we have figured out */ - ti->sram_base = new_base >> 12; - ibmtr_mem_base = chk_base; - } - } - else ti->sram_base = ti->sram_phys >> 12; - - /* The PCMCIA has already got the interrupt line and the io port, - so no chance of anybody else getting it - MLP */ - if (request_irq(dev->irq = irq, tok_interrupt, 0, "ibmtr", dev) != 0) { - DPRINTK("Could not grab irq %d. Halting Token Ring driver.\n", - irq); - iounmap(t_mmio); - return -ENODEV; - } - /*?? Now, allocate some of the PIO PORTs for this driver.. */ - /* record PIOaddr range as busy */ - if (!request_region(PIOaddr, IBMTR_IO_EXTENT, "ibmtr")) { - DPRINTK("Could not grab PIO range. Halting driver.\n"); - free_irq(dev->irq, dev); - iounmap(t_mmio); - return -EBUSY; - } - - if (!version_printed++) { - printk(version); - } -#endif /* !PCMCIA */ - DPRINTK("%s %s found\n", - channel_def[cardpresent - 1], adapter_def(ti->adapter_type)); - DPRINTK("using irq %d, PIOaddr %hx, %dK shared RAM.\n", - irq, PIOaddr, ti->mapped_ram_size / 2); - DPRINTK("Hardware address : %pM\n", dev->dev_addr); - if (ti->page_mask) - DPRINTK("Shared RAM paging enabled. " - "Page size: %uK Shared Ram size %dK\n", - ((ti->page_mask^0xff)+1) >>2, ti->avail_shared_ram / 2); - else - DPRINTK("Shared RAM paging disabled. ti->page_mask %x\n", - ti->page_mask); - - /* Calculate the maximum DHB we can use */ - /* two cases where avail_shared_ram doesn't equal mapped_ram_size: - 1. avail_shared_ram is 127 but mapped_ram_size is 128 (typical) - 2. user has configured adapter for less than avail_shared_ram - but is not using paging (she should use paging, I believe) - */ - if (!ti->page_mask) { - ti->avail_shared_ram= - min(ti->mapped_ram_size,ti->avail_shared_ram); - } - - switch (ti->avail_shared_ram) { - case 16: /* 8KB shared RAM */ - ti->dhb_size4mb = min(ti->dhb_size4mb, (unsigned short)2048); - ti->rbuf_len4 = 1032; - ti->rbuf_cnt4=2; - ti->dhb_size16mb = min(ti->dhb_size16mb, (unsigned short)2048); - ti->rbuf_len16 = 1032; - ti->rbuf_cnt16=2; - break; - case 32: /* 16KB shared RAM */ - ti->dhb_size4mb = min(ti->dhb_size4mb, (unsigned short)4464); - ti->rbuf_len4 = 1032; - ti->rbuf_cnt4=4; - ti->dhb_size16mb = min(ti->dhb_size16mb, (unsigned short)4096); - ti->rbuf_len16 = 1032; /*1024 usable */ - ti->rbuf_cnt16=4; - break; - case 64: /* 32KB shared RAM */ - ti->dhb_size4mb = min(ti->dhb_size4mb, (unsigned short)4464); - ti->rbuf_len4 = 1032; - ti->rbuf_cnt4=6; - ti->dhb_size16mb = min(ti->dhb_size16mb, (unsigned short)10240); - ti->rbuf_len16 = 1032; - ti->rbuf_cnt16=6; - break; - case 127: /* 63.5KB shared RAM */ - ti->dhb_size4mb = min(ti->dhb_size4mb, (unsigned short)4464); - ti->rbuf_len4 = 1032; - ti->rbuf_cnt4=6; - ti->dhb_size16mb = min(ti->dhb_size16mb, (unsigned short)16384); - ti->rbuf_len16 = 1032; - ti->rbuf_cnt16=16; - break; - case 128: /* 64KB shared RAM */ - ti->dhb_size4mb = min(ti->dhb_size4mb, (unsigned short)4464); - ti->rbuf_len4 = 1032; - ti->rbuf_cnt4=6; - ti->dhb_size16mb = min(ti->dhb_size16mb, (unsigned short)17960); - ti->rbuf_len16 = 1032; - ti->rbuf_cnt16=16; - break; - default: - ti->dhb_size4mb = 2048; - ti->rbuf_len4 = 1032; - ti->rbuf_cnt4=2; - ti->dhb_size16mb = 2048; - ti->rbuf_len16 = 1032; - ti->rbuf_cnt16=2; - break; - } - /* this formula is not smart enough for the paging case - ti->rbuf_cnt<x> = (ti->avail_shared_ram * BLOCKSZ - ADAPT_PRIVATE - - ARBLENGTH - SSBLENGTH - DLC_MAX_SAP * SAPLENGTH - - DLC_MAX_STA * STALENGTH - ti->dhb_size<x>mb * NUM_DHB - - SRBLENGTH - ASBLENGTH) / ti->rbuf_len<x>; - */ - ti->maxmtu16 = (ti->rbuf_len16 - 8) * ti->rbuf_cnt16 - TR_HLEN; - ti->maxmtu4 = (ti->rbuf_len4 - 8) * ti->rbuf_cnt4 - TR_HLEN; - /*BMS assuming 18 bytes of Routing Information (usually works) */ - DPRINTK("Maximum Receive Internet Protocol MTU 16Mbps: %d, 4Mbps: %d\n", - ti->maxmtu16, ti->maxmtu4); - - dev->base_addr = PIOaddr; /* set the value for device */ - dev->mem_start = ti->sram_base << 12; - dev->mem_end = dev->mem_start + (ti->mapped_ram_size << 9) - 1; - trdev_init(dev); - return 0; /* Return 0 to indicate we have found a Token Ring card. */ -} /*ibmtr_probe1() */ - -/*****************************************************************************/ - -/* query the adapter for the size of shared RAM */ -/* the function returns the RAM size in units of 512 bytes */ - -static unsigned char __devinit get_sram_size(struct tok_info *adapt_info) -{ - unsigned char avail_sram_code; - static unsigned char size_code[] = { 0, 16, 32, 64, 127, 128 }; - /* Adapter gives - 'F' -- use RRR bits 3,2 - 'E' -- 8kb 'D' -- 16kb - 'C' -- 32kb 'A' -- 64KB - 'B' - 64KB less 512 bytes at top - (WARNING ... must zero top bytes in INIT */ - - avail_sram_code = 0xf - readb(adapt_info->mmio + AIPAVAILSHRAM); - if (avail_sram_code) return size_code[avail_sram_code]; - else /* for code 'F', must compute size from RRR(3,2) bits */ - return 1 << - ((readb(adapt_info->mmio+ACA_OFFSET+ACA_RW+RRR_ODD)>>2&3)+4); -} - -/*****************************************************************************/ - -static const struct net_device_ops trdev_netdev_ops = { - .ndo_open = tok_open, - .ndo_stop = tok_close, - .ndo_start_xmit = tok_send_packet, - .ndo_set_rx_mode = tok_set_multicast_list, - .ndo_change_mtu = ibmtr_change_mtu, -}; - -static int __devinit trdev_init(struct net_device *dev) -{ - struct tok_info *ti = netdev_priv(dev); - - SET_PAGE(ti->srb_page); - ti->open_failure = NO ; - dev->netdev_ops = &trdev_netdev_ops; - - return 0; -} - -/*****************************************************************************/ - -static int tok_init_card(struct net_device *dev) -{ - struct tok_info *ti; - short PIOaddr; - unsigned long i; - - PIOaddr = dev->base_addr; - ti = netdev_priv(dev); - /* Special processing for first interrupt after reset */ - ti->do_tok_int = FIRST_INT; - /* Reset adapter */ - writeb(~INT_ENABLE, ti->mmio + ACA_OFFSET + ACA_RESET + ISRP_EVEN); - outb(0, PIOaddr + ADAPTRESET); - - schedule_timeout_uninterruptible(TR_RST_TIME); /* wait 50ms */ - - outb(0, PIOaddr + ADAPTRESETREL); -#ifdef ENABLE_PAGING - if (ti->page_mask) - writeb(SRPR_ENABLE_PAGING,ti->mmio+ACA_OFFSET+ACA_RW+SRPR_EVEN); -#endif - writeb(INT_ENABLE, ti->mmio + ACA_OFFSET + ACA_SET + ISRP_EVEN); - i = sleep_on_timeout(&ti->wait_for_reset, 4 * HZ); - return i? 0 : -EAGAIN; -} - -/*****************************************************************************/ -static int tok_open(struct net_device *dev) -{ - struct tok_info *ti = netdev_priv(dev); - int i; - - /*the case we were left in a failure state during a previous open */ - if (ti->open_failure == YES) { - DPRINTK("Last time you were disconnected, how about now?\n"); - printk("You can't insert with an ICS connector half-cocked.\n"); - } - - ti->open_status = CLOSED; /* CLOSED or OPEN */ - ti->sap_status = CLOSED; /* CLOSED or OPEN */ - ti->open_failure = NO; /* NO or YES */ - ti->open_mode = MANUAL; /* MANUAL or AUTOMATIC */ - - ti->sram_phys &= ~1; /* to reverse what we do in tok_close */ - /* init the spinlock */ - spin_lock_init(&ti->lock); - init_timer(&ti->tr_timer); - - i = tok_init_card(dev); - if (i) return i; - - while (1){ - tok_open_adapter((unsigned long) dev); - i= interruptible_sleep_on_timeout(&ti->wait_for_reset, 25 * HZ); - /* sig catch: estimate opening adapter takes more than .5 sec*/ - if (i>(245*HZ)/10) break; /* fancier than if (i==25*HZ) */ - if (i==0) break; - if (ti->open_status == OPEN && ti->sap_status==OPEN) { - netif_start_queue(dev); - DPRINTK("Adapter is up and running\n"); - return 0; - } - i=schedule_timeout_interruptible(TR_RETRY_INTERVAL); - /* wait 30 seconds */ - if(i!=0) break; /*prob. a signal, like the i>24*HZ case above */ - } - outb(0, dev->base_addr + ADAPTRESET);/* kill pending interrupts*/ - DPRINTK("TERMINATED via signal\n"); /*BMS useful */ - return -EAGAIN; -} - -/*****************************************************************************/ - -#define COMMAND_OFST 0 -#define OPEN_OPTIONS_OFST 8 -#define NUM_RCV_BUF_OFST 24 -#define RCV_BUF_LEN_OFST 26 -#define DHB_LENGTH_OFST 28 -#define NUM_DHB_OFST 30 -#define DLC_MAX_SAP_OFST 32 -#define DLC_MAX_STA_OFST 33 - -static void tok_open_adapter(unsigned long dev_addr) -{ - struct net_device *dev = (struct net_device *) dev_addr; - struct tok_info *ti; - int i; - - ti = netdev_priv(dev); - SET_PAGE(ti->init_srb_page); - writeb(~SRB_RESP_INT, ti->mmio + ACA_OFFSET + ACA_RESET + ISRP_ODD); - for (i = 0; i < sizeof(struct dir_open_adapter); i++) - writeb(0, ti->init_srb + i); - writeb(DIR_OPEN_ADAPTER, ti->init_srb + COMMAND_OFST); - writew(htons(OPEN_PASS_BCON_MAC), ti->init_srb + OPEN_OPTIONS_OFST); - if (ti->ring_speed == 16) { - writew(htons(ti->dhb_size16mb), ti->init_srb + DHB_LENGTH_OFST); - writew(htons(ti->rbuf_cnt16), ti->init_srb + NUM_RCV_BUF_OFST); - writew(htons(ti->rbuf_len16), ti->init_srb + RCV_BUF_LEN_OFST); - } else { - writew(htons(ti->dhb_size4mb), ti->init_srb + DHB_LENGTH_OFST); - writew(htons(ti->rbuf_cnt4), ti->init_srb + NUM_RCV_BUF_OFST); - writew(htons(ti->rbuf_len4), ti->init_srb + RCV_BUF_LEN_OFST); - } - writeb(NUM_DHB, /* always 2 */ ti->init_srb + NUM_DHB_OFST); - writeb(DLC_MAX_SAP, ti->init_srb + DLC_MAX_SAP_OFST); - writeb(DLC_MAX_STA, ti->init_srb + DLC_MAX_STA_OFST); - ti->srb = ti->init_srb; /* We use this one in the interrupt handler */ - ti->srb_page = ti->init_srb_page; - DPRINTK("Opening adapter: Xmit bfrs: %d X %d, Rcv bfrs: %d X %d\n", - readb(ti->init_srb + NUM_DHB_OFST), - ntohs(readw(ti->init_srb + DHB_LENGTH_OFST)), - ntohs(readw(ti->init_srb + NUM_RCV_BUF_OFST)), - ntohs(readw(ti->init_srb + RCV_BUF_LEN_OFST))); - writeb(INT_ENABLE, ti->mmio + ACA_OFFSET + ACA_SET + ISRP_EVEN); - writeb(CMD_IN_SRB, ti->mmio + ACA_OFFSET + ACA_SET + ISRA_ODD); -} - -/*****************************************************************************/ - -static void open_sap(unsigned char type, struct net_device *dev) -{ - int i; - struct tok_info *ti = netdev_priv(dev); - - SET_PAGE(ti->srb_page); - for (i = 0; i < sizeof(struct dlc_open_sap); i++) - writeb(0, ti->srb + i); - -#define MAX_I_FIELD_OFST 14 -#define SAP_VALUE_OFST 16 -#define SAP_OPTIONS_OFST 17 -#define STATION_COUNT_OFST 18 - - writeb(DLC_OPEN_SAP, ti->srb + COMMAND_OFST); - writew(htons(MAX_I_FIELD), ti->srb + MAX_I_FIELD_OFST); - writeb(SAP_OPEN_IND_SAP | SAP_OPEN_PRIORITY, ti->srb+ SAP_OPTIONS_OFST); - writeb(SAP_OPEN_STATION_CNT, ti->srb + STATION_COUNT_OFST); - writeb(type, ti->srb + SAP_VALUE_OFST); - writeb(CMD_IN_SRB, ti->mmio + ACA_OFFSET + ACA_SET + ISRA_ODD); -} - - -/*****************************************************************************/ - -static void tok_set_multicast_list(struct net_device *dev) -{ - struct tok_info *ti = netdev_priv(dev); - struct netdev_hw_addr *ha; - unsigned char address[4]; - - int i; - - /*BMS the next line is CRUCIAL or you may be sad when you */ - /*BMS ifconfig tr down or hot unplug a PCMCIA card ??hownowbrowncow*/ - if (/*BMSHELPdev->start == 0 ||*/ ti->open_status != OPEN) return; - address[0] = address[1] = address[2] = address[3] = 0; - netdev_for_each_mc_addr(ha, dev) { - address[0] |= ha->addr[2]; - address[1] |= ha->addr[3]; - address[2] |= ha->addr[4]; - address[3] |= ha->addr[5]; - } - SET_PAGE(ti->srb_page); - for (i = 0; i < sizeof(struct srb_set_funct_addr); i++) - writeb(0, ti->srb + i); - -#define FUNCT_ADDRESS_OFST 6 - - writeb(DIR_SET_FUNC_ADDR, ti->srb + COMMAND_OFST); - for (i = 0; i < 4; i++) - writeb(address[i], ti->srb + FUNCT_ADDRESS_OFST + i); - writeb(CMD_IN_SRB, ti->mmio + ACA_OFFSET + ACA_SET + ISRA_ODD); -#if TR_VERBOSE - DPRINTK("Setting functional address: "); - for (i=0;i<4;i++) printk("%02X ", address[i]); - printk("\n"); -#endif -} - -/*****************************************************************************/ - -#define STATION_ID_OFST 4 - -static netdev_tx_t tok_send_packet(struct sk_buff *skb, - struct net_device *dev) -{ - struct tok_info *ti; - unsigned long flags; - ti = netdev_priv(dev); - - netif_stop_queue(dev); - - /* lock against other CPUs */ - spin_lock_irqsave(&(ti->lock), flags); - - /* Save skb; we'll need it when the adapter asks for the data */ - ti->current_skb = skb; - SET_PAGE(ti->srb_page); - writeb(XMIT_UI_FRAME, ti->srb + COMMAND_OFST); - writew(ti->exsap_station_id, ti->srb + STATION_ID_OFST); - writeb(CMD_IN_SRB, ti->mmio + ACA_OFFSET + ACA_SET + ISRA_ODD); - spin_unlock_irqrestore(&(ti->lock), flags); - return NETDEV_TX_OK; -} - -/*****************************************************************************/ - -static int tok_close(struct net_device *dev) -{ - struct tok_info *ti = netdev_priv(dev); - - /* Important for P |