diff options
Diffstat (limited to 'drivers/net/stmmac/stmmac_main.c')
| -rw-r--r-- | drivers/net/stmmac/stmmac_main.c | 55 |
1 files changed, 30 insertions, 25 deletions
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c index c2f14dc9ba2..508fba8fa07 100644 --- a/drivers/net/stmmac/stmmac_main.c +++ b/drivers/net/stmmac/stmmac_main.c @@ -416,13 +416,8 @@ static void init_dma_desc_rings(struct net_device *dev) unsigned int txsize = priv->dma_tx_size; unsigned int rxsize = priv->dma_rx_size; unsigned int bfsize = priv->dma_buf_sz; - int buff2_needed = 0; - int dis_ic = 0; + int buff2_needed = 0, dis_ic = 0; -#ifdef CONFIG_STMMAC_TIMER - /* Using Timers disable interrupts on completion for the reception */ - dis_ic = 1; -#endif /* Set the Buffer size according to the MTU; * indeed, in case of jumbo we need to bump-up the buffer sizes. */ @@ -437,6 +432,11 @@ static void init_dma_desc_rings(struct net_device *dev) else bfsize = DMA_BUFFER_SIZE; +#ifdef CONFIG_STMMAC_TIMER + /* Disable interrupts on completion for the reception if timer is on */ + if (likely(priv->tm->enable)) + dis_ic = 1; +#endif /* If the MTU exceeds 8k so use the second buffer in the chain */ if (bfsize >= BUF_SIZE_8KiB) buff2_needed = 1; @@ -809,20 +809,22 @@ static void stmmac_tx(struct stmmac_priv *priv) static inline void stmmac_enable_irq(struct stmmac_priv *priv) { -#ifndef CONFIG_STMMAC_TIMER - writel(DMA_INTR_DEFAULT_MASK, priv->dev->base_addr + DMA_INTR_ENA); -#else - priv->tm->timer_start(tmrate); +#ifdef CONFIG_STMMAC_TIMER + if (likely(priv->tm->enable)) + priv->tm->timer_start(tmrate); + else #endif + writel(DMA_INTR_DEFAULT_MASK, priv->dev->base_addr + DMA_INTR_ENA); } static inline void stmmac_disable_irq(struct stmmac_priv *priv) { -#ifndef CONFIG_STMMAC_TIMER - writel(0, priv->dev->base_addr + DMA_INTR_ENA); -#else - priv->tm->timer_stop(); +#ifdef CONFIG_STMMAC_TIMER + if (likely(priv->tm->enable)) + priv->tm->timer_stop(); + else #endif + writel(0, priv->dev->base_addr + DMA_INTR_ENA); } static int stmmac_has_work(struct stmmac_priv *priv) @@ -920,8 +922,7 @@ static void stmmac_dma_interrupt(struct net_device *dev) DBG(intr, INFO, "CSR5[15] DMA ABNORMAL IRQ: "); if (unlikely(intr_status & DMA_STATUS_UNF)) { DBG(intr, INFO, "transmit underflow\n"); - if (unlikely(tc != SF_DMA_MODE) - && (tc <= 256)) { + if (unlikely(tc != SF_DMA_MODE) && (tc <= 256)) { /* Try to bump up the threshold */ tc += 64; priv->mac_type->ops->dma_mode(ioaddr, tc, @@ -1022,7 +1023,7 @@ static int stmmac_open(struct net_device *dev) } /* Request the IRQ lines */ - ret = request_irq(dev->irq, &stmmac_interrupt, + ret = request_irq(dev->irq, stmmac_interrupt, IRQF_SHARED, dev->name, dev); if (unlikely(ret < 0)) { pr_err("%s: ERROR: allocating the IRQ %d (error: %d)\n", @@ -1031,22 +1032,23 @@ static int stmmac_open(struct net_device *dev) } #ifdef CONFIG_STMMAC_TIMER - priv->tm = kmalloc(sizeof(struct stmmac_timer *), GFP_KERNEL); + priv->tm = kzalloc(sizeof(struct stmmac_timer *), GFP_KERNEL); if (unlikely(priv->tm == NULL)) { pr_err("%s: ERROR: timer memory alloc failed \n", __func__); return -ENOMEM; } priv->tm->freq = tmrate; - /* Test if the HW timer can be actually used. - * In case of failure continue with no timer. */ + /* Test if the external timer can be actually used. + * In case of failure continue without timer. */ if (unlikely((stmmac_open_ext_timer(dev, priv->tm)) < 0)) { - pr_warning("stmmaceth: cannot attach the HW timer\n"); + pr_warning("stmmaceth: cannot attach the external timer.\n"); tmrate = 0; priv->tm->freq = 0; priv->tm->timer_start = stmmac_no_timer_started; priv->tm->timer_stop = stmmac_no_timer_stopped; - } + } else + priv->tm->enable = 1; #endif /* Create and initialize the TX/RX descriptors chains. */ @@ -1322,9 +1324,11 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) /* Interrupt on completition only for the latest segment */ priv->mac_type->ops->close_tx_desc(desc); + #ifdef CONFIG_STMMAC_TIMER - /* Clean IC while using timers */ - priv->mac_type->ops->clear_tx_ic(desc); + /* Clean IC while using timer */ + if (likely(priv->tm->enable)) + priv->mac_type->ops->clear_tx_ic(desc); #endif /* To avoid raise condition */ priv->mac_type->ops->set_tx_owner(first); @@ -2028,7 +2032,8 @@ static int stmmac_suspend(struct platform_device *pdev, pm_message_t state) #ifdef CONFIG_STMMAC_TIMER priv->tm->timer_stop(); - dis_ic = 1; + if (likely(priv->tm->enable)) + dis_ic = 1; #endif napi_disable(&priv->napi); |