diff options
Diffstat (limited to 'drivers/net/phy')
27 files changed, 3624 insertions, 737 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 342561ad315..65de0cab8d0 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -24,6 +24,12 @@ config AMD_PHY ---help--- Currently supports the am79c874 +config AMD_XGBE_PHY + tristate "Driver for the AMD 10GbE (amd-xgbe) PHYs" + depends on OF + ---help--- + Currently supports the AMD 10GbE PHY + config MARVELL_PHY tristate "Drivers for Marvell PHYs" ---help--- @@ -71,6 +77,12 @@ config BCM63XX_PHY ---help--- Currently supports the 6348 and 6358 PHYs. +config BCM7XXX_PHY + tristate "Drivers for Broadcom 7xxx SOCs internal PHYs" + ---help--- + Currently supports the BCM7366, BCM7439, BCM7445, and + 40nm and 65nm generation of BCM7xxx Set Top Box SoCs. + config BCM87XX_PHY tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs" help @@ -154,6 +166,13 @@ config MDIO_SUN4I interface units of the Allwinner SoC that have an EMAC (A10, A12, A10s, etc.) +config MDIO_MOXART + tristate "MOXA ART MDIO interface support" + depends on ARCH_MOXART + help + This driver supports the MDIO interface found in the network + interface units of the MOXA ART SoC + config MDIO_BUS_MUX tristate depends on OF_MDIO diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 23a2ab2e847..7dc3d5b304c 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_SMSC_PHY) += smsc.o obj-$(CONFIG_VITESSE_PHY) += vitesse.o obj-$(CONFIG_BROADCOM_PHY) += broadcom.o obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o +obj-$(CONFIG_BCM7XXX_PHY) += bcm7xxx.o obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o obj-$(CONFIG_ICPLUS_PHY) += icplus.o obj-$(CONFIG_REALTEK_PHY) += realtek.o @@ -31,3 +32,5 @@ obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o +obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o +obj-$(CONFIG_AMD_XGBE_PHY) += amd-xgbe-phy.o diff --git a/drivers/net/phy/amd-xgbe-phy.c b/drivers/net/phy/amd-xgbe-phy.c new file mode 100644 index 00000000000..b57c2244286 --- /dev/null +++ b/drivers/net/phy/amd-xgbe-phy.c @@ -0,0 +1,1357 @@ +/* + * AMD 10Gb Ethernet PHY driver + * + * This file is available to you under your choice of the following two + * licenses: + * + * License 1: GPLv2 + * + * Copyright (c) 2014 Advanced Micro Devices, Inc. + * + * This file is free software; you may copy, redistribute and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or (at + * your option) any later version. + * + * This file is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + * + * License 2: Modified BSD + * + * Copyright (c) 2014 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/unistd.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/mii.h> +#include <linux/ethtool.h> +#include <linux/phy.h> +#include <linux/mdio.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/of_device.h> +#include <linux/uaccess.h> +#include <asm/irq.h> + + +MODULE_AUTHOR("Tom Lendacky <thomas.lendacky@amd.com>"); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_VERSION("1.0.0-a"); +MODULE_DESCRIPTION("AMD 10GbE (amd-xgbe) PHY driver"); + +#define XGBE_PHY_ID 0x000162d0 +#define XGBE_PHY_MASK 0xfffffff0 + +#define XGBE_AN_INT_CMPLT 0x01 +#define XGBE_AN_INC_LINK 0x02 +#define XGBE_AN_PG_RCV 0x04 + +#define XNP_MCF_NULL_MESSAGE 0x001 +#define XNP_ACK_PROCESSED (1 << 12) +#define XNP_MP_FORMATTED (1 << 13) +#define XNP_NP_EXCHANGE (1 << 15) + +#ifndef MDIO_PMA_10GBR_PMD_CTRL +#define MDIO_PMA_10GBR_PMD_CTRL 0x0096 +#endif +#ifndef MDIO_PMA_10GBR_FEC_CTRL +#define MDIO_PMA_10GBR_FEC_CTRL 0x00ab +#endif +#ifndef MDIO_AN_XNP +#define MDIO_AN_XNP 0x0016 +#endif + +#ifndef MDIO_AN_INTMASK +#define MDIO_AN_INTMASK 0x8001 +#endif +#ifndef MDIO_AN_INT +#define MDIO_AN_INT 0x8002 +#endif + +#ifndef MDIO_CTRL1_SPEED1G +#define MDIO_CTRL1_SPEED1G (MDIO_CTRL1_SPEED10G & ~BMCR_SPEED100) +#endif + +/* SerDes integration register offsets */ +#define SIR0_STATUS 0x0040 +#define SIR1_SPEED 0x0000 + +/* SerDes integration register entry bit positions and sizes */ +#define SIR0_STATUS_RX_READY_INDEX 0 +#define SIR0_STATUS_RX_READY_WIDTH 1 +#define SIR0_STATUS_TX_READY_INDEX 8 +#define SIR0_STATUS_TX_READY_WIDTH 1 +#define SIR1_SPEED_DATARATE_INDEX 4 +#define SIR1_SPEED_DATARATE_WIDTH 2 +#define SIR1_SPEED_PI_SPD_SEL_INDEX 12 +#define SIR1_SPEED_PI_SPD_SEL_WIDTH 4 +#define SIR1_SPEED_PLLSEL_INDEX 3 +#define SIR1_SPEED_PLLSEL_WIDTH 1 +#define SIR1_SPEED_RATECHANGE_INDEX 6 +#define SIR1_SPEED_RATECHANGE_WIDTH 1 +#define SIR1_SPEED_TXAMP_INDEX 8 +#define SIR1_SPEED_TXAMP_WIDTH 4 +#define SIR1_SPEED_WORDMODE_INDEX 0 +#define SIR1_SPEED_WORDMODE_WIDTH 3 + +#define SPEED_10000_CDR 0x7 +#define SPEED_10000_PLL 0x1 +#define SPEED_10000_RATE 0x0 +#define SPEED_10000_TXAMP 0xa +#define SPEED_10000_WORD 0x7 + +#define SPEED_2500_CDR 0x2 +#define SPEED_2500_PLL 0x0 +#define SPEED_2500_RATE 0x2 +#define SPEED_2500_TXAMP 0xf +#define SPEED_2500_WORD 0x1 + +#define SPEED_1000_CDR 0x2 +#define SPEED_1000_PLL 0x0 +#define SPEED_1000_RATE 0x3 +#define SPEED_1000_TXAMP 0xf +#define SPEED_1000_WORD 0x1 + + +/* SerDes RxTx register offsets */ +#define RXTX_REG20 0x0050 +#define RXTX_REG114 0x01c8 + +/* SerDes RxTx register entry bit positions and sizes */ +#define RXTX_REG20_BLWC_ENA_INDEX 2 +#define RXTX_REG20_BLWC_ENA_WIDTH 1 +#define RXTX_REG114_PQ_REG_INDEX 9 +#define RXTX_REG114_PQ_REG_WIDTH 7 + +#define RXTX_10000_BLWC 0 +#define RXTX_10000_PQ 0x1e + +#define RXTX_2500_BLWC 1 +#define RXTX_2500_PQ 0xa + +#define RXTX_1000_BLWC 1 +#define RXTX_1000_PQ 0xa + +/* Bit setting and getting macros + * The get macro will extract the current bit field value from within + * the variable + * + * The set macro will clear the current bit field value within the + * variable and then set the bit field of the variable to the + * specified value + */ +#define GET_BITS(_var, _index, _width) \ + (((_var) >> (_index)) & ((0x1 << (_width)) - 1)) + +#define SET_BITS(_var, _index, _width, _val) \ +do { \ + (_var) &= ~(((0x1 << (_width)) - 1) << (_index)); \ + (_var) |= (((_val) & ((0x1 << (_width)) - 1)) << (_index)); \ +} while (0) + +/* Macros for reading or writing SerDes integration registers + * The ioread macros will get bit fields or full values using the + * register definitions formed using the input names + * + * The iowrite macros will set bit fields or full values using the + * register definitions formed using the input names + */ +#define XSIR0_IOREAD(_priv, _reg) \ + ioread16((_priv)->sir0_regs + _reg) + +#define XSIR0_IOREAD_BITS(_priv, _reg, _field) \ + GET_BITS(XSIR0_IOREAD((_priv), _reg), \ + _reg##_##_field##_INDEX, \ + _reg##_##_field##_WIDTH) + +#define XSIR0_IOWRITE(_priv, _reg, _val) \ + iowrite16((_val), (_priv)->sir0_regs + _reg) + +#define XSIR0_IOWRITE_BITS(_priv, _reg, _field, _val) \ +do { \ + u16 reg_val = XSIR0_IOREAD((_priv), _reg); \ + SET_BITS(reg_val, \ + _reg##_##_field##_INDEX, \ + _reg##_##_field##_WIDTH, (_val)); \ + XSIR0_IOWRITE((_priv), _reg, reg_val); \ +} while (0) + +#define XSIR1_IOREAD(_priv, _reg) \ + ioread16((_priv)->sir1_regs + _reg) + +#define XSIR1_IOREAD_BITS(_priv, _reg, _field) \ + GET_BITS(XSIR1_IOREAD((_priv), _reg), \ + _reg##_##_field##_INDEX, \ + _reg##_##_field##_WIDTH) + +#define XSIR1_IOWRITE(_priv, _reg, _val) \ + iowrite16((_val), (_priv)->sir1_regs + _reg) + +#define XSIR1_IOWRITE_BITS(_priv, _reg, _field, _val) \ +do { \ + u16 reg_val = XSIR1_IOREAD((_priv), _reg); \ + SET_BITS(reg_val, \ + _reg##_##_field##_INDEX, \ + _reg##_##_field##_WIDTH, (_val)); \ + XSIR1_IOWRITE((_priv), _reg, reg_val); \ +} while (0) + + +/* Macros for reading or writing SerDes RxTx registers + * The ioread macros will get bit fields or full values using the + * register definitions formed using the input names + * + * The iowrite macros will set bit fields or full values using the + * register definitions formed using the input names + */ +#define XRXTX_IOREAD(_priv, _reg) \ + ioread16((_priv)->rxtx_regs + _reg) + +#define XRXTX_IOREAD_BITS(_priv, _reg, _field) \ + GET_BITS(XRXTX_IOREAD((_priv), _reg), \ + _reg##_##_field##_INDEX, \ + _reg##_##_field##_WIDTH) + +#define XRXTX_IOWRITE(_priv, _reg, _val) \ + iowrite16((_val), (_priv)->rxtx_regs + _reg) + +#define XRXTX_IOWRITE_BITS(_priv, _reg, _field, _val) \ +do { \ + u16 reg_val = XRXTX_IOREAD((_priv), _reg); \ + SET_BITS(reg_val, \ + _reg##_##_field##_INDEX, \ + _reg##_##_field##_WIDTH, (_val)); \ + XRXTX_IOWRITE((_priv), _reg, reg_val); \ +} while (0) + + +enum amd_xgbe_phy_an { + AMD_XGBE_AN_READY = 0, + AMD_XGBE_AN_START, + AMD_XGBE_AN_EVENT, + AMD_XGBE_AN_PAGE_RECEIVED, + AMD_XGBE_AN_INCOMPAT_LINK, + AMD_XGBE_AN_COMPLETE, + AMD_XGBE_AN_NO_LINK, + AMD_XGBE_AN_EXIT, + AMD_XGBE_AN_ERROR, +}; + +enum amd_xgbe_phy_rx { + AMD_XGBE_RX_READY = 0, + AMD_XGBE_RX_BPA, + AMD_XGBE_RX_XNP, + AMD_XGBE_RX_COMPLETE, +}; + +enum amd_xgbe_phy_mode { + AMD_XGBE_MODE_KR, + AMD_XGBE_MODE_KX, +}; + +struct amd_xgbe_phy_priv { + struct platform_device *pdev; + struct device *dev; + + struct phy_device *phydev; + + /* SerDes related mmio resources */ + struct resource *rxtx_res; + struct resource *sir0_res; + struct resource *sir1_res; + + /* SerDes related mmio registers */ + void __iomem *rxtx_regs; /* SerDes Rx/Tx CSRs */ + void __iomem *sir0_regs; /* SerDes integration registers (1/2) */ + void __iomem *sir1_regs; /* SerDes integration registers (2/2) */ + + /* Maintain link status for re-starting auto-negotiation */ + unsigned int link; + enum amd_xgbe_phy_mode mode; + + /* Auto-negotiation state machine support */ + struct mutex an_mutex; + enum amd_xgbe_phy_an an_result; + enum amd_xgbe_phy_an an_state; + enum amd_xgbe_phy_rx kr_state; + enum amd_xgbe_phy_rx kx_state; + struct work_struct an_work; + struct workqueue_struct *an_workqueue; +}; + +static int amd_xgbe_an_enable_kr_training(struct phy_device *phydev) +{ + int ret; + + ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL); + if (ret < 0) + return ret; + + ret |= 0x02; + phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL, ret); + + return 0; +} + +static int amd_xgbe_an_disable_kr_training(struct phy_device *phydev) +{ + int ret; + + ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL); + if (ret < 0) + return ret; + + ret &= ~0x02; + phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL, ret); + + return 0; +} + +static int amd_xgbe_phy_pcs_power_cycle(struct phy_device *phydev) +{ + int ret; + + ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1); + if (ret < 0) + return ret; + + ret |= MDIO_CTRL1_LPOWER; + phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret); + + usleep_range(75, 100); + + ret &= ~MDIO_CTRL1_LPOWER; + phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret); + + return 0; +} + +static void amd_xgbe_phy_serdes_start_ratechange(struct phy_device *phydev) +{ + struct amd_xgbe_phy_priv *priv = phydev->priv; + + /* Assert Rx and Tx ratechange */ + XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, RATECHANGE, 1); +} + +static void amd_xgbe_phy_serdes_complete_ratechange(struct phy_device *phydev) +{ + struct amd_xgbe_phy_priv *priv = phydev->priv; + + /* Release Rx and Tx ratechange */ + XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, RATECHANGE, 0); + + /* Wait for Rx and Tx ready */ + while (!XSIR0_IOREAD_BITS(priv, SIR0_STATUS, RX_READY) && + !XSIR0_IOREAD_BITS(priv, SIR0_STATUS, TX_READY)) + usleep_range(10, 20); +} + +static int amd_xgbe_phy_xgmii_mode(struct phy_device *phydev) +{ + struct amd_xgbe_phy_priv *priv = phydev->priv; + int ret; + + /* Enable KR training */ + ret = amd_xgbe_an_enable_kr_training(phydev); + if (ret < 0) + return ret; + + /* Set PCS to KR/10G speed */ + ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2); + if (ret < 0) + return ret; + + ret &= ~MDIO_PCS_CTRL2_TYPE; + ret |= MDIO_PCS_CTRL2_10GBR; + phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2, ret); + + ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1); + if (ret < 0) + return ret; + + ret &= ~MDIO_CTRL1_SPEEDSEL; + ret |= MDIO_CTRL1_SPEED10G; + phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret); + + ret = amd_xgbe_phy_pcs_power_cycle(phydev); + if (ret < 0) + return ret; + + /* Set SerDes to 10G speed */ + amd_xgbe_phy_serdes_start_ratechange(phydev); + + XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, DATARATE, SPEED_10000_RATE); + XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, WORDMODE, SPEED_10000_WORD); + XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, TXAMP, SPEED_10000_TXAMP); + XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PLLSEL, SPEED_10000_PLL); + XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PI_SPD_SEL, SPEED_10000_CDR); + + XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA, RXTX_10000_BLWC); + XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG, RXTX_10000_PQ); + + amd_xgbe_phy_serdes_complete_ratechange(phydev); + + priv->mode = AMD_XGBE_MODE_KR; + + return 0; +} + +static int amd_xgbe_phy_gmii_2500_mode(struct phy_device *phydev) +{ + struct amd_xgbe_phy_priv *priv = phydev->priv; + int ret; + + /* Disable KR training */ + ret = amd_xgbe_an_disable_kr_training(phydev); + if (ret < 0) + return ret; + + /* Set PCS to KX/1G speed */ + ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2); + if (ret < 0) + return ret; + + ret &= ~MDIO_PCS_CTRL2_TYPE; + ret |= MDIO_PCS_CTRL2_10GBX; + phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2, ret); + + ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1); + if (ret < 0) + return ret; + + ret &= ~MDIO_CTRL1_SPEEDSEL; + ret |= MDIO_CTRL1_SPEED1G; + phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret); + + ret = amd_xgbe_phy_pcs_power_cycle(phydev); + if (ret < 0) + return ret; + + /* Set SerDes to 2.5G speed */ + amd_xgbe_phy_serdes_start_ratechange(phydev); + + XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, DATARATE, SPEED_2500_RATE); + XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, WORDMODE, SPEED_2500_WORD); + XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, TXAMP, SPEED_2500_TXAMP); + XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PLLSEL, SPEED_2500_PLL); + XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PI_SPD_SEL, SPEED_2500_CDR); + + XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA, RXTX_2500_BLWC); + XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG, RXTX_2500_PQ); + + amd_xgbe_phy_serdes_complete_ratechange(phydev); + + priv->mode = AMD_XGBE_MODE_KX; + + return 0; +} + +static int amd_xgbe_phy_gmii_mode(struct phy_device *phydev) +{ + struct amd_xgbe_phy_priv *priv = phydev->priv; + int ret; + + /* Disable KR training */ + ret = amd_xgbe_an_disable_kr_training(phydev); + if (ret < 0) + return ret; + + /* Set PCS to KX/1G speed */ + ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2); + if (ret < 0) + return ret; + + ret &= ~MDIO_PCS_CTRL2_TYPE; + ret |= MDIO_PCS_CTRL2_10GBX; + phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2, ret); + + ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1); + if (ret < 0) + return ret; + + ret &= ~MDIO_CTRL1_SPEEDSEL; + ret |= MDIO_CTRL1_SPEED1G; + phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret); + + ret = amd_xgbe_phy_pcs_power_cycle(phydev); + if (ret < 0) + return ret; + + /* Set SerDes to 1G speed */ + amd_xgbe_phy_serdes_start_ratechange(phydev); + + XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, DATARATE, SPEED_1000_RATE); + XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, WORDMODE, SPEED_1000_WORD); + XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, TXAMP, SPEED_1000_TXAMP); + XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PLLSEL, SPEED_1000_PLL); + XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PI_SPD_SEL, SPEED_1000_CDR); + + XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA, RXTX_1000_BLWC); + XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG, RXTX_1000_PQ); + + amd_xgbe_phy_serdes_complete_ratechange(phydev); + + priv->mode = AMD_XGBE_MODE_KX; + + return 0; +} + +static int amd_xgbe_phy_switch_mode(struct phy_device *phydev) +{ + struct amd_xgbe_phy_priv *priv = phydev->priv; + int ret; + + /* If we are in KR switch to KX, and vice-versa */ + if (priv->mode == AMD_XGBE_MODE_KR) + ret = amd_xgbe_phy_gmii_mode(phydev); + else + ret = amd_xgbe_phy_xgmii_mode(phydev); + + return ret; +} + +static enum amd_xgbe_phy_an amd_xgbe_an_switch_mode(struct phy_device *phydev) +{ + int ret; + + ret = amd_xgbe_phy_switch_mode(phydev); + if (ret < 0) + return AMD_XGBE_AN_ERROR; + + return AMD_XGBE_AN_START; +} + +static enum amd_xgbe_phy_an amd_xgbe_an_tx_training(struct phy_device *phydev, + enum amd_xgbe_phy_rx *state) +{ + struct amd_xgbe_phy_priv *priv = phydev->priv; + int ad_reg, lp_reg, ret; + + *state = AMD_XGBE_RX_COMPLETE; + + /* If we're in KX mode then we're done */ + if (priv->mode == AMD_XGBE_MODE_KX) + return AMD_XGBE_AN_EVENT; + + /* Enable/Disable FEC */ + ad_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 2); + if (ad_reg < 0) + return AMD_XGBE_AN_ERROR; + + lp_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA + 2); + if (lp_reg < 0) + return AMD_XGBE_AN_ERROR; + + ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_FEC_CTRL); + if (ret < 0) + return AMD_XGBE_AN_ERROR; + + if ((ad_reg & 0xc000) && (lp_reg & 0xc000)) + ret |= 0x01; + else + ret &= ~0x01; + + phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_FEC_CTRL, ret); + + /* Start KR training */ + ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL); + if (ret < 0) + return AMD_XGBE_AN_ERROR; + + ret |= 0x01; + phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL, ret); + + return AMD_XGBE_AN_EVENT; +} + +static enum amd_xgbe_phy_an amd_xgbe_an_tx_xnp(struct phy_device *phydev, + enum amd_xgbe_phy_rx *state) +{ + u16 msg; + + *state = AMD_XGBE_RX_XNP; + + msg = XNP_MCF_NULL_MESSAGE; + msg |= XNP_MP_FORMATTED; + + phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_XNP + 2, 0); + phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_XNP + 1, 0); + phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_XNP, msg); + + return AMD_XGBE_AN_EVENT; +} + +static enum amd_xgbe_phy_an amd_xgbe_an_rx_bpa(struct phy_device *phydev, + enum amd_xgbe_phy_rx *state) +{ + struct amd_xgbe_phy_priv *priv = phydev->priv; + unsigned int link_support; + int ret, ad_reg, lp_reg; + + /* Read Base Ability register 2 first */ + ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA + 1); + if (ret < 0) + return AMD_XGBE_AN_ERROR; + + /* Check for a supported mode, otherwise restart in a different one */ + link_support = (priv->mode == AMD_XGBE_MODE_KR) ? 0x80 : 0x20; + if (!(ret & link_support)) + return amd_xgbe_an_switch_mode(phydev); + + /* Check Extended Next Page support */ + ad_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE); + if (ad_reg < 0) + return AMD_XGBE_AN_ERROR; + + lp_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA); + if (lp_reg < 0) + return AMD_XGBE_AN_ERROR; + + return ((ad_reg & XNP_NP_EXCHANGE) || (lp_reg & XNP_NP_EXCHANGE)) ? + amd_xgbe_an_tx_xnp(phydev, state) : + amd_xgbe_an_tx_training(phydev, state); +} + +static enum amd_xgbe_phy_an amd_xgbe_an_rx_xnp(struct phy_device *phydev, + enum amd_xgbe_phy_rx *state) +{ + int ad_reg, lp_reg; + + /* Check Extended Next Page support */ + ad_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE); + if (ad_reg < 0) + return AMD_XGBE_AN_ERROR; + + lp_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA); + if (lp_reg < 0) + return AMD_XGBE_AN_ERROR; + + return ((ad_reg & XNP_NP_EXCHANGE) || (lp_reg & XNP_NP_EXCHANGE)) ? + amd_xgbe_an_tx_xnp(phydev, state) : + amd_xgbe_an_tx_training(phydev, state); +} + +static enum amd_xgbe_phy_an amd_xgbe_an_start(struct phy_device *phydev) +{ + struct amd_xgbe_phy_priv *priv = phydev->priv; + int ret; + + /* Be sure we aren't looping trying to negotiate */ + if (priv->mode == AMD_XGBE_MODE_KR) { + if (priv->kr_state != AMD_XGBE_RX_READY) + return AMD_XGBE_AN_NO_LINK; + priv->kr_state = AMD_XGBE_RX_BPA; + } else { + if (priv->kx_state != AMD_XGBE_RX_READY) + return AMD_XGBE_AN_NO_LINK; + priv->kx_state = AMD_XGBE_RX_BPA; + } + + /* Set up Advertisement register 3 first */ + ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 2); + if (ret < 0) + return AMD_XGBE_AN_ERROR; + + if (phydev->supported & SUPPORTED_10000baseR_FEC) + ret |= 0xc000; + else + ret &= ~0xc000; + + phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 2, ret); + + /* Set up Advertisement register 2 next */ + ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 1); + if (ret < 0) + return AMD_XGBE_AN_ERROR; + + if (phydev->supported & SUPPORTED_10000baseKR_Full) + ret |= 0x80; + else + ret &= ~0x80; + + if (phydev->supported & SUPPORTED_1000baseKX_Full) + ret |= 0x20; + else + ret &= ~0x20; + + phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 1, ret); + + /* Set up Advertisement register 1 last */ + ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE); + if (ret < 0) + return AMD_XGBE_AN_ERROR; + + if (phydev->supported & SUPPORTED_Pause) + ret |= 0x400; + else + ret &= ~0x400; + + if (phydev->supported & SUPPORTED_Asym_Pause) + ret |= 0x800; + else + ret &= ~0x800; + + /* We don't intend to perform XNP */ + ret &= ~XNP_NP_EXCHANGE; + + phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE, ret); + + /* Enable and start auto-negotiation */ + phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INT, 0); + + ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1); + if (ret < 0) + return AMD_XGBE_AN_ERROR; + + ret |= MDIO_AN_CTRL1_ENABLE; + ret |= MDIO_AN_CTRL1_RESTART; + phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1, ret); + + return AMD_XGBE_AN_EVENT; +} + +static enum amd_xgbe_phy_an amd_xgbe_an_event(struct phy_device *phydev) +{ + enum amd_xgbe_phy_an new_state; + int ret; + + ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INT); + if (ret < 0) + return AMD_XGBE_AN_ERROR; + + new_state = AMD_XGBE_AN_EVENT; + if (ret & XGBE_AN_PG_RCV) + new_state = AMD_XGBE_AN_PAGE_RECEIVED; + else if (ret & XGBE_AN_INC_LINK) + new_state = AMD_XGBE_AN_INCOMPAT_LINK; + else if (ret & XGBE_AN_INT_CMPLT) + new_state = AMD_XGBE_AN_COMPLETE; + + if (new_state != AMD_XGBE_AN_EVENT) + phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INT, 0); + + return new_state; +} + +static enum amd_xgbe_phy_an amd_xgbe_an_page_received(struct phy_device *phydev) +{ + struct amd_xgbe_phy_priv *priv = phydev->priv; + enum amd_xgbe_phy_rx *state; + int ret; + + state = (priv->mode == AMD_XGBE_MODE_KR) ? &priv->kr_state + : &priv->kx_state; + + switch (*state) { + case AMD_XGBE_RX_BPA: + ret = amd_xgbe_an_rx_bpa(phydev, state); + break; + + case AMD_XGBE_RX_XNP: + ret = amd_xgbe_an_rx_xnp(phydev, state); + break; + + default: + ret = AMD_XGBE_AN_ERROR; + } + + return ret; +} + +static enum amd_xgbe_phy_an amd_xgbe_an_incompat_link(struct phy_device *phydev) +{ + return amd_xgbe_an_switch_mode(phydev); +} + +static void amd_xgbe_an_state_machine(struct work_struct *work) +{ + struct amd_xgbe_phy_priv *priv = container_of(work, + struct amd_xgbe_phy_priv, + an_work); + struct phy_device *phydev = priv->phydev; + enum amd_xgbe_phy_an cur_state; + int sleep; + + while (1) { + mutex_lock(&priv->an_mutex); + + cur_state = priv->an_state; + + switch (priv->an_state) { + case AMD_XGBE_AN_START: + priv->an_state = amd_xgbe_an_start(phydev); + break; + + case AMD_XGBE_AN_EVENT: + priv->an_state = amd_xgbe_an_event(phydev); + break; + + case AMD_XGBE_AN_PAGE_RECEIVED: + priv->an_state = amd_xgbe_an_page_received(phydev); + break; + + case AMD_XGBE_AN_INCOMPAT_LINK: + priv->an_state = amd_xgbe_an_incompat_link(phydev); + break; + + case AMD_XGBE_AN_COMPLETE: + case AMD_XGBE_AN_NO_LINK: + case AMD_XGBE_AN_EXIT: + goto exit_unlock; + + default: + priv->an_state = AMD_XGBE_AN_ERROR; + } + + if (priv->an_state == AMD_XGBE_AN_ERROR) { + netdev_err(phydev->attached_dev, + "error during auto-negotiation, state=%u\n", + cur_state); + goto exit_unlock; + } + + sleep = (priv->an_state == AMD_XGBE_AN_EVENT) ? 1 : 0; + + mutex_unlock(&priv->an_mutex); + + if (sleep) + usleep_range(20, 50); + } + +exit_unlock: + priv->an_result = priv->an_state; + priv->an_state = AMD_XGBE_AN_READY; + + mutex_unlock(&priv->an_mutex); +} + +static int amd_xgbe_phy_soft_reset(struct phy_device *phydev) +{ + int count, ret; + + ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1); + if (ret < 0) + return ret; + + ret |= MDIO_CTRL1_RESET; + phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret); + + count = 50; + do { + msleep(20); + ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1); + if (ret < 0) + return ret; + } while ((ret & MDIO_CTRL1_RESET) && --count); + + if (ret & MDIO_CTRL1_RESET) + return -ETIMEDOUT; + + return 0; +} + +static int amd_xgbe_phy_config_init(struct phy_device *phydev) +{ + /* Initialize supported features */ + phydev->supported = SUPPORTED_Autoneg; + phydev->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause; + phydev->supported |= SUPPORTED_Backplane; + phydev->supported |= SUPPORTED_1000baseKX_Full | + SUPPORTED_2500baseX_Full; + phydev->supported |= SUPPORTED_10000baseKR_Full | + SUPPORTED_10000baseR_FEC; + phydev->advertising = phydev->supported; + + /* Turn off and clear interrupts */ + phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INTMASK, 0); + phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INT, 0); + + return 0; +} + +static int amd_xgbe_phy_setup_forced(struct phy_device *phydev) +{ + int ret; + + /* Disable auto-negotiation */ + ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1); + if (ret < 0) + return ret; + + ret &= ~MDIO_AN_CTRL1_ENABLE; + phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1, ret); + + /* Validate/Set specified speed */ + switch (phydev->speed) { + case SPEED_10000: + ret = amd_xgbe_phy_xgmii_mode(phydev); + break; + + case SPEED_2500: + ret = amd_xgbe_phy_gmii_2500_mode(phydev); + break; + + case SPEED_1000: + ret = amd_xgbe_phy_gmii_mode(phydev); + break; + + default: + ret = -EINVAL; + } + + if (ret < 0) + return ret; + + /* Validate duplex mode */ + if (phydev->duplex != DUPLEX_FULL) + return -EINVAL; + + phydev->pause = 0; + phydev->asym_pause = 0; + + return 0; +} + +static int amd_xgbe_phy_config_aneg(struct phy_device *phydev) +{ + struct amd_xgbe_phy_priv *priv = phydev->priv; + u32 mmd_mask = phydev->c45_ids.devices_in_package; + int ret; + + if (phydev->autoneg != AUTONEG_ENABLE) + return amd_xgbe_phy_setup_forced(phydev); + + /* Make sure we have the AN MMD present */ + if (!(mmd_mask & MDIO_DEVS_AN)) + return -EINVAL; + + /* Get the current speed mode */ + ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2); + if (ret < 0) + return ret; + + /* Start/Restart the auto-negotiation state machine */ + mutex_lock(&priv->an_mutex); + priv->an_result = AMD_XGBE_AN_READY; + priv->an_state = AMD_XGBE_AN_START; + priv->kr_state = AMD_XGBE_RX_READY; + priv->kx_state = AMD_XGBE_RX_READY; + mutex_unlock(&priv->an_mutex); + + queue_work(priv->an_workqueue, &priv->an_work); + + return 0; +} + +static int amd_xgbe_phy_aneg_done(struct phy_device *phydev) +{ + struct amd_xgbe_phy_priv *priv = phydev->priv; + enum amd_xgbe_phy_an state; + + mutex_lock(&priv->an_mutex); + state = priv->an_result; + mutex_unlock(&priv->an_mutex); + + return (state == AMD_XGBE_AN_COMPLETE); +} + +static int amd_xgbe_phy_update_link(struct phy_device *phydev) +{ + struct amd_xgbe_phy_priv *priv = phydev->priv; + enum amd_xgbe_phy_an state; + unsigned int check_again, autoneg; + int ret; + + /* If we're doing auto-negotiation don't report link down */ + mutex_lock(&priv->an_mutex); + state = priv->an_state; + mutex_unlock(&priv->an_mutex); + + if (state != AMD_XGBE_AN_READY) { + phydev->link = 1; + return 0; + } + + /* Since the device can be in the wrong mode when a link is + * (re-)established (cable connected after the interface is + * up, etc.), the link status may report no link. If there + * is no link, try switching modes and checking the status + * again. + */ + check_again = 1; +again: + /* Link status is latched low, so read once to clear + * and then read again to get current state + */ + ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_STAT1); + if (ret < 0) + return ret; + + ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_STAT1); + if (ret < 0) + return ret; + + phydev->link = (ret & MDIO_STAT1_LSTATUS) ? 1 : 0; + + if (!phydev->link) { + ret = amd_xgbe_phy_switch_mode(phydev); + if (check_again) { + check_again = 0; + goto again; + } + } + + autoneg = (phydev->link && !priv->link) ? 1 : 0; + priv->link = phydev->link; + if (autoneg) { + /* Link is (back) up, re-start auto-negotiation */ + ret = amd_xgbe_phy_config_aneg(phydev); + if (ret < 0) + return ret; + } + + return 0; +} + +static int amd_xgbe_phy_read_status(struct phy_device *phydev) +{ + u32 mmd_mask = phydev->c45_ids.devices_in_package; + int ret, mode, ad_ret, lp_ret; + + ret = amd_xgbe_phy_update_link(phydev); + if (ret) + return ret; + + mode = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2); + if (mode < 0) + return mode; + mode &= MDIO_PCS_CTRL2_TYPE; + + if (phydev->autoneg == AUTONEG_ENABLE) { + if (!(mmd_mask & MDIO_DEVS_AN)) + return -EINVAL; + + if (!amd_xgbe_phy_aneg_done(phydev)) + return 0; + + /* Compare Advertisement and Link Partner register 1 */ + ad_ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE); + if (ad_ret < 0) + return ad_ret; + lp_ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA); + if (lp_ret < 0) + return lp_ret; + + ad_ret &= lp_ret; + phydev->pause = (ad_ret & 0x400) ? 1 : 0; + phydev->asym_pause = (ad_ret & 0x800) ? 1 : 0; + + /* Compare Advertisement and Link Partner register 2 */ + ad_ret = phy_read_mmd(phydev, MDIO_MMD_AN, + MDIO_AN_ADVERTISE + 1); + if (ad_ret < 0) + return ad_ret; + lp_ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA + 1); + if (lp_ret < 0) + return lp_ret; + + ad_ret &= lp_ret; + if (ad_ret & 0x80) { + phydev->speed = SPEED_10000; + if (mode != MDIO_PCS_CTRL2_10GBR) { + ret = amd_xgbe_phy_xgmii_mode(phydev); + if (ret < 0) + return ret; + } + } else { + phydev->speed = SPEED_1000; + if (mode == MDIO_PCS_CTRL2_10GBR) { + ret = amd_xgbe_phy_gmii_mode(phydev); + if (ret < 0) + return ret; + } + } + + phydev->duplex = DUPLEX_FULL; + } else { + phydev->speed = (mode == MDIO_PCS_CTRL2_10GBR) ? SPEED_10000 + : SPEED_1000; + phydev->duplex = DUPLEX_FULL; + phydev->pause = 0; + phydev->asym_pause = 0; + } + + return 0; +} + +static int amd_xgbe_phy_suspend(struct phy_device *phydev) +{ + int ret; + + mutex_lock(&phydev->lock); + + ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1); + if (ret < 0) + goto unlock; + + ret |= MDIO_CTRL1_LPOWER; + phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret); + + ret = 0; + +unlock: + mutex_unlock(&phydev->lock); + + return ret; +} + +static int amd_xgbe_phy_resume(struct phy_device *phydev) +{ + int ret; + + mutex_lock(&phydev->lock); + + ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1); + if (ret < 0) + goto unlock; + + ret &= ~MDIO_CTRL1_LPOWER; + phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret); + + ret = 0; + +unlock: + mutex_unlock(&phydev->lock); + + return ret; +} + +static int amd_xgbe_phy_probe(struct phy_device *phydev) +{ + struct amd_xgbe_phy_priv *priv; + struct platform_device *pdev; + struct device *dev; + char *wq_name; + int ret; + + if (!phydev->dev.of_node) + return -EINVAL; + + pdev = of_find_device_by_node(phydev->dev.of_node); + if (!pdev) + return -EINVAL; + dev = &pdev->dev; + + wq_name = kasprintf(GFP_KERNEL, "%s-amd-xgbe-phy", phydev->bus->name); + if (!wq_name) { + ret = -ENOMEM; + goto err_pdev; + } + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) { + ret = -ENOMEM; + goto err_name; + } + + priv->pdev = pdev; + priv->dev = dev; + priv->phydev = phydev; + + /* Get the device mmio areas */ + priv->rxtx_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->rxtx_regs = devm_ioremap_resource(dev, priv->rxtx_res); + if (IS_ERR(priv->rxtx_regs)) { + dev_err(dev, "rxtx ioremap failed\n"); + ret = PTR_ERR(priv->rxtx_regs); + goto err_priv; + } + + priv->sir0_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + priv->sir0_regs = devm_ioremap_resource(dev, priv->sir0_res); + if (IS_ERR(priv->sir0_regs)) { + dev_err(dev, "sir0 ioremap failed\n"); + ret = PTR_ERR(priv->sir0_regs); + goto err_rxtx; + } + + priv->sir1_res = platform_get_resource(pdev, IORESOURCE_MEM, 2); + priv->sir1_regs = devm_ioremap_resource(dev, priv->sir1_res); + if (IS_ERR(priv->sir1_regs)) { + dev_err(dev, "sir1 ioremap failed\n"); + ret = PTR_ERR(priv->sir1_regs); + goto err_sir0; + } + + priv->link = 1; + + ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2); + if (ret < 0) + goto err_sir1; + if ((ret & MDIO_PCS_CTRL2_TYPE) == MDIO_PCS_CTRL2_10GBR) + priv->mode = AMD_XGBE_MODE_KR; + else + priv->mode = AMD_XGBE_MODE_KX; + + mutex_init(&priv->an_mutex); + INIT_WORK(&priv->an_work, amd_xgbe_an_state_machine); + priv->an_workqueue = create_singlethread_workqueue(wq_name); + if (!priv->an_workqueue) { + ret = -ENOMEM; + goto err_sir1; + } + + phydev->priv = priv; + + kfree(wq_name); + of_dev_put(pdev); + + return 0; + +err_sir1: + devm_iounmap(dev, priv->sir1_regs); + devm_release_mem_region(dev, priv->sir1_res->start, + resource_size(priv->sir1_res)); + +err_sir0: + devm_iounmap(dev, priv->sir0_regs); + devm_release_mem_region(dev, priv->sir0_res->start, + resource_size(priv->sir0_res)); + +err_rxtx: + devm_iounmap(dev, priv->rxtx_regs); + devm_release_mem_region(dev, priv->rxtx_res->start, + resource_size(priv->rxtx_res)); + +err_priv: + devm_kfree(dev, priv); + +err_name: + kfree(wq_name); + +err_pdev: + of_dev_put(pdev); + + return ret; +} + +static void amd_xgbe_phy_remove(struct phy_device *phydev) +{ + struct amd_xgbe_phy_priv *priv = phydev->priv; + struct device *dev = priv->dev; + + /* Stop any in process auto-negotiation */ + mutex_lock(&priv->an_mutex); + priv->an_state = AMD_XGBE_AN_EXIT; + mutex_unlock(&priv->an_mutex); + + flush_workqueue(priv->an_workqueue); + destroy_workqueue(priv->an_workqueue); + + /* Release resources */ + devm_iounmap(dev, priv->sir1_regs); + devm_release_mem_region(dev, priv->sir1_res->start, + resource_size(priv->sir1_res)); + + devm_iounmap(dev, priv->sir0_regs); + devm_release_mem_region(dev, priv->sir0_res->start, + resource_size(priv->sir0_res)); + + devm_iounmap(dev, priv->rxtx_regs); + devm_release_mem_region(dev, priv->rxtx_res->start, + resource_size(priv->rxtx_res)); + + devm_kfree(dev, priv); +} + +static int amd_xgbe_match_phy_device(struct phy_device *phydev) +{ + return phydev->c45_ids.device_ids[MDIO_MMD_PCS] == XGBE_PHY_ID; +} + +static struct phy_driver amd_xgbe_phy_driver[] = { + { + .phy_id = XGBE_PHY_ID, + .phy_id_mask = XGBE_PHY_MASK, + .name = "AMD XGBE PHY", + .features = 0, + .probe = amd_xgbe_phy_probe, + .remove = amd_xgbe_phy_remove, + .soft_reset = amd_xgbe_phy_soft_reset, + .config_init = amd_xgbe_phy_config_init, + .suspend = amd_xgbe_phy_suspend, + .resume = amd_xgbe_phy_resume, + .config_aneg = amd_xgbe_phy_config_aneg, + .aneg_done = amd_xgbe_phy_aneg_done, + .read_status = amd_xgbe_phy_read_status, + .match_phy_device = amd_xgbe_match_phy_device, + .driver = { + .owner = THIS_MODULE, + }, + }, +}; + +static int __init amd_xgbe_phy_init(void) +{ + return phy_drivers_register(amd_xgbe_phy_driver, + ARRAY_SIZE(amd_xgbe_phy_driver)); +} + +static void __exit amd_xgbe_phy_exit(void) +{ + phy_drivers_unregister(amd_xgbe_phy_driver, + ARRAY_SIZE(amd_xgbe_phy_driver)); +} + +module_init(amd_xgbe_phy_init); +module_exit(amd_xgbe_phy_exit); + +static struct mdio_device_id __maybe_unused amd_xgbe_phy_ids[] = { + { XGBE_PHY_ID, XGBE_PHY_MASK }, + { } +}; +MODULE_DEVICE_TABLE(mdio, amd_xgbe_phy_ids); diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index ac22283aaf2..fdc1b418fa6 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -16,9 +16,13 @@ #include <linux/string.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> +#include <linux/of_gpio.h> +#include <linux/gpio/consumer.h> #define AT803X_INTR_ENABLE 0x12 #define AT803X_INTR_STATUS 0x13 +#define AT803X_SMART_SPEED 0x14 +#define AT803X_LED_CONTROL 0x18 #define AT803X_WOL_ENABLE 0x01 #define AT803X_DEVICE_ADDR 0x03 #define AT803X_LOC_MAC_ADDR_0_15_OFFSET 0x804C @@ -27,15 +31,60 @@ #define AT803X_MMD_ACCESS_CONTROL 0x0D #define AT803X_MMD_ACCESS_CONTROL_DATA 0x0E #define AT803X_FUNC_DATA 0x4003 +#define AT803X_INER 0x0012 +#define AT803X_INER_INIT 0xec00 +#define AT803X_INSR 0x0013 #define AT803X_DEBUG_ADDR 0x1D #define AT803X_DEBUG_DATA 0x1E #define AT803X_DEBUG_SYSTEM_MODE_CTRL 0x05 #define AT803X_DEBUG_RGMII_TX_CLK_DLY BIT(8) +#define ATH8030_PHY_ID 0x004dd076 +#define ATH8031_PHY_ID 0x004dd074 +#define ATH8035_PHY_ID 0x004dd072 + MODULE_DESCRIPTION("Atheros 803x PHY driver"); MODULE_AUTHOR("Matus Ujhelyi"); MODULE_LICENSE("GPL"); +struct at803x_priv { + bool phy_reset:1; + struct gpio_desc *gpiod_reset; +}; + +struct at803x_context { + u16 bmcr; + u16 advertise; + u16 control1000; + u16 int_enable; + u16 smart_speed; + u16 led_control; +}; + +/* save relevant PHY registers to private copy */ +static void at803x_context_save(struct phy_device *phydev, + struct at803x_context *context) +{ + context->bmcr = phy_read(phydev, MII_BMCR); + context->advertise = phy_read(phydev, MII_ADVERTISE); + context->control1000 = phy_read(phydev, MII_CTRL1000); + context->int_enable = phy_read(phydev, AT803X_INTR_ENABLE); + context->smart_speed = phy_read(phydev, AT803X_SMART_SPEED); + context->led_control = phy_read(phydev, AT803X_LED_CONTROL); +} + +/* restore relevant PHY registers from private copy */ +static void at803x_context_restore(struct phy_device *phydev, + const struct at803x_context *context) +{ + phy_write(phydev, MII_BMCR, context->bmcr); + phy_write(phydev, MII_ADVERTISE, context->advertise); + phy_write(phydev, MII_CTRL1000, context->control1000); + phy_write(phydev, AT803X_INTR_ENABLE, context->int_enable); + phy_write(phydev, AT803X_SMART_SPEED, context->smart_speed); + phy_write(phydev, AT803X_LED_CONTROL, context->led_control); +} + static int at803x_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol) { @@ -100,43 +149,72 @@ static void at803x_get_wol(struct phy_device *phydev, wol->wolopts |= WAKE_MAGIC; } +static int at803x_suspend(struct phy_device *phydev) +{ + int value; + int wol_enabled; + + mutex_lock(&phydev->lock); + + value = phy_read(phydev, AT803X_INTR_ENABLE); + wol_enabled = value & AT803X_WOL_ENABLE; + + value = phy_read(phydev, MII_BMCR); + + if (wol_enabled) + value |= BMCR_ISOLATE; + else + value |= BMCR_PDOWN; + + phy_write(phydev, MII_BMCR, value); + + mutex_unlock(&phydev->lock); + + return 0; +} + +static int at803x_resume(struct phy_device *phydev) +{ + int value; + + mutex_lock(&phydev->lock); + + value = phy_read(phydev, MII_BMCR); + value &= ~(BMCR_PDOWN | BMCR_ISOLATE); + phy_write(phydev, MII_BMCR, value); + + mutex_unlock(&phydev->lock); + + return 0; +} + +static int at803x_probe(struct phy_device *phydev) +{ + struct device *dev = &phydev->dev; + struct at803x_priv *priv; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->gpiod_reset = devm_gpiod_get(dev, "reset"); + if (IS_ERR(priv->gpiod_reset)) + priv->gpiod_reset = NULL; + else + gpiod_direction_output(priv->gpiod_reset, 1); + + phydev->priv = priv; + + return 0; +} + static int at803x_config_init(struct phy_device *phydev) { - int val; int ret; - u32 features; - - features = SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_AUI | - SUPPORTED_FIBRE | SUPPORTED_BNC; - - val = phy_read(phydev, MII_BMSR); - if (val < 0) - return val; - - if (val & BMSR_ANEGCAPABLE) - features |= SUPPORTED_Autoneg; - if (val & BMSR_100FULL) - features |= SUPPORTED_100baseT_Full; - if (val & BMSR_100HALF) - features |= SUPPORTED_100baseT_Half; - if (val & BMSR_10FULL) - features |= SUPPORTED_10baseT_Full; - if (val & BMSR_10HALF) - features |= SUPPORTED_10baseT_Half; - - if (val & BMSR_ESTATEN) { - val = phy_read(phydev, MII_ESTATUS); - if (val < 0) - return val; - - if (val & ESTATUS_1000_TFULL) - features |= SUPPORTED_1000baseT_Full; - if (val & ESTATUS_1000_THALF) - features |= SUPPORTED_1000baseT_Half; - } - phydev->supported = features; - phydev->advertising = features; + ret = genphy_config_init(phydev); + if (ret < 0) + return ret; if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) { ret = phy_write(phydev, AT803X_DEBUG_ADDR, @@ -152,50 +230,124 @@ static int at803x_config_init(struct phy_device *phydev) return 0; } +static int at803x_ack_interrupt(struct phy_device *phydev) +{ + int err; + + err = phy_read(phydev, AT803X_INSR); + + return (err < 0) ? err : 0; +} + +static int at803x_config_intr(struct phy_device *phydev) +{ + int err; + int value; + + value = phy_read(phydev, AT803X_INER); + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) + err = phy_write(phydev, AT803X_INER, + value | AT803X_INER_INIT); + else + err = phy_write(phydev, AT803X_INER, 0); + + return err; +} + +static void at803x_link_change_notify(struct phy_device *phydev) +{ + struct at803x_priv *priv = phydev->priv; + + /* + * Conduct a hardware reset for AT8030 every time a link loss is + * signalled. This is necessary to circumvent a hardware bug that + * occurs when the cable is unplugged while TX packets are pending + * in the FIFO. In such cases, the FIFO enters an error mode it + * cannot recover from by software. + */ + if (phydev->drv->phy_id == ATH8030_PHY_ID) { + if (phydev->state == PHY_NOLINK) { + if (priv->gpiod_reset && !priv->phy_reset) { + struct at803x_context context; + + at803x_context_save(phydev, &context); + + gpiod_set_value(priv->gpiod_reset, 0); + msleep(1); + gpiod_set_value(priv->gpiod_reset, 1); + msleep(1); + + at803x_context_restore(phydev, &context); + + dev_dbg(&phydev->dev, "%s(): phy was reset\n", + __func__); + priv->phy_reset = true; + } + } else { + priv->phy_reset = false; + } + } +} + static struct phy_driver at803x_driver[] = { { /* ATHEROS 8035 */ - .phy_id = 0x004dd072, - .name = "Atheros 8035 ethernet", - .phy_id_mask = 0xffffffef, - .config_init = at803x_config_init, - .set_wol = at803x_set_wol, - .get_wol = at803x_get_wol, - .features = PHY_GBIT_FEATURES, - .flags = PHY_HAS_INTERRUPT, - .config_aneg = &genphy_config_aneg, - .read_status = &genphy_read_status, - .driver = { + .phy_id = ATH8035_PHY_ID, + .name = "Atheros 8035 ethernet", + .phy_id_mask = 0xffffffef, + .probe = at803x_probe, + .config_init = at803x_config_init, + .link_change_notify = at803x_link_change_notify, + .set_wol = at803x_set_wol, + .get_wol = at803x_get_wol, + .suspend = at803x_suspend, + .resume = at803x_resume, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .driver = { .owner = THIS_MODULE, }, }, { /* ATHEROS 8030 */ - .phy_id = 0x004dd076, - .name = "Atheros 8030 ethernet", - .phy_id_mask = 0xffffffef, - .config_init = at803x_config_init, - .set_wol = at803x_set_wol, - .get_wol = at803x_get_wol, - .features = PHY_GBIT_FEATURES, - .flags = PHY_HAS_INTERRUPT, - .config_aneg = &genphy_config_aneg, - .read_status = &genphy_read_status, - .driver = { + .phy_id = ATH8030_PHY_ID, + .name = "Atheros 8030 ethernet", + .phy_id_mask = 0xffffffef, + .probe = at803x_probe, + .config_init = at803x_config_init, + .link_change_notify = at803x_link_change_notify, + .set_wol = at803x_set_wol, + .get_wol = at803x_get_wol, + .suspend = at803x_suspend, + .resume = at803x_resume, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .driver = { .owner = THIS_MODULE, }, }, { /* ATHEROS 8031 */ - .phy_id = 0x004dd074, - .name = "Atheros 8031 ethernet", - .phy_id_mask = 0xffffffef, - .config_init = at803x_config_init, - .set_wol = at803x_set_wol, - .get_wol = at803x_get_wol, - .features = PHY_GBIT_FEATURES, - .flags = PHY_HAS_INTERRUPT, - .config_aneg = &genphy_config_aneg, - .read_status = &genphy_read_status, - .driver = { + .phy_id = ATH8031_PHY_ID, + .name = "Atheros 8031 ethernet", + .phy_id_mask = 0xffffffef, + .probe = at803x_probe, + .config_init = at803x_config_init, + .link_change_notify = at803x_link_change_notify, + .set_wol = at803x_set_wol, + .get_wol = at803x_get_wol, + .suspend = at803x_suspend, + .resume = at803x_resume, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = &at803x_ack_interrupt, + .config_intr = &at803x_config_intr, + .driver = { .owner = THIS_MODULE, }, } }; @@ -208,17 +360,16 @@ static int __init atheros_init(void) static void __exit atheros_exit(void) { - return phy_drivers_unregister(at803x_driver, - ARRAY_SIZE(at803x_driver)); + phy_drivers_unregister(at803x_driver, ARRAY_SIZE(at803x_driver)); } module_init(atheros_init); module_exit(atheros_exit); static struct mdio_device_id __maybe_unused atheros_tbl[] = { - { 0x004dd076, 0xffffffef }, - { 0x004dd074, 0xffffffef }, - { 0x004dd072, 0xffffffef }, + { ATH8030_PHY_ID, 0xffffffef }, + { ATH8031_PHY_ID, 0xffffffef }, + { ATH8035_PHY_ID, 0xffffffef }, { } }; diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c new file mode 100644 index 00000000000..526b94cea56 --- /dev/null +++ b/drivers/net/phy/bcm7xxx.c @@ -0,0 +1,359 @@ +/* + * Broadcom BCM7xxx internal transceivers support. + * + * Copyright (C) 2014, Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/phy.h> +#include <linux/delay.h> +#include <linux/bitops.h> +#include <linux/brcmphy.h> + +/* Broadcom BCM7xxx internal PHY registers */ +#define MII_BCM7XXX_CHANNEL_WIDTH 0x2000 + +/* 40nm only register definitions */ +#define MII_BCM7XXX_100TX_AUX_CTL 0x10 +#define MII_BCM7XXX_100TX_FALSE_CAR 0x13 +#define MII_BCM7XXX_100TX_DISC 0x14 +#define MII_BCM7XXX_AUX_MODE 0x1d +#define MII_BCM7XX_64CLK_MDIO BIT(12) +#define MII_BCM7XXX_CORE_BASE1E 0x1e +#define MII_BCM7XXX_TEST 0x1f +#define MII_BCM7XXX_SHD_MODE_2 BIT(2) + +/* 28nm only register definitions */ +#define MISC_ADDR(base, channel) base, channel + +#define DSP_TAP10 MISC_ADDR(0x0a, 0) +#define PLL_PLLCTRL_1 MISC_ADDR(0x32, 1) +#define PLL_PLLCTRL_2 MISC_ADDR(0x32, 2) +#define PLL_PLLCTRL_4 MISC_ADDR(0x33, 0) + +#define AFE_RXCONFIG_0 MISC_ADDR(0x38, 0) +#define AFE_RXCONFIG_1 MISC_ADDR(0x38, 1) +#define AFE_RX_LP_COUNTER MISC_ADDR(0x38, 3) +#define AFE_TX_CONFIG MISC_ADDR(0x39, 0) +#define AFE_HPF_TRIM_OTHERS MISC_ADDR(0x3a, 0) + +#define CORE_EXPB0 0xb0 + +static int bcm7445_config_init(struct phy_device *phydev) +{ + int ret; + const struct bcm7445_regs { + int reg; + u16 value; + } bcm7445_regs_cfg[] = { + /* increases ADC latency by 24ns */ + { MII_BCM54XX_EXP_SEL, 0x0038 }, + { MII_BCM54XX_EXP_DATA, 0xAB95 }, + /* increases internal 1V LDO voltage by 5% */ + { MII_BCM54XX_EXP_SEL, 0x2038 }, + { MII_BCM54XX_EXP_DATA, 0xBB22 }, + /* reduce RX low pass filter corner frequency */ + { MII_BCM54XX_EXP_SEL, 0x6038 }, + { MII_BCM54XX_EXP_DATA, 0xFFC5 }, + /* reduce RX high pass filter corner frequency */ + { MII_BCM54XX_EXP_SEL, 0x003a }, + { MII_BCM54XX_EXP_DATA, 0x2002 }, + }; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(bcm7445_regs_cfg); i++) { + ret = phy_write(phydev, + bcm7445_regs_cfg[i].reg, + bcm7445_regs_cfg[i].value); + if (ret) + return ret; + } + + return 0; +} + +static void phy_write_exp(struct phy_device *phydev, + u16 reg, u16 value) +{ + phy_write(phydev, MII_BCM54XX_EXP_SEL, MII_BCM54XX_EXP_SEL_ER | reg); + phy_write(phydev, MII_BCM54XX_EXP_DATA, value); +} + +static void phy_write_misc(struct phy_device *phydev, + u16 reg, u16 chl, u16 value) +{ + int tmp; + + phy_write(phydev, MII_BCM54XX_AUX_CTL, MII_BCM54XX_AUXCTL_SHDWSEL_MISC); + + tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL); + tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA; + phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp); + + tmp = (chl * MII_BCM7XXX_CHANNEL_WIDTH) | reg; + phy_write(phydev, MII_BCM54XX_EXP_SEL, tmp); + + phy_write(phydev, MII_BCM54XX_EXP_DATA, value); +} + +static int bcm7xxx_28nm_afe_config_init(struct phy_device *phydev) +{ + /* Increase VCO range to prevent unlocking problem of PLL at low + * temp + */ + phy_write_misc(phydev, PLL_PLLCTRL_1, 0x0048); + + /* Change Ki to 011 */ + phy_write_misc(phydev, PLL_PLLCTRL_2, 0x021b); + + /* Disable loading of TVCO buffer to bandgap, set bandgap trim + * to 111 + */ + phy_write_misc(phydev, PLL_PLLCTRL_4, 0x0e20); + + /* Adjust bias current trim by -3 */ + phy_write_misc(phydev, DSP_TAP10, 0x690b); + + /* Switch to CORE_BASE1E */ + phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0xd); + + /* Reset R_CAL/RC_CAL Engine */ + phy_write_exp(phydev, CORE_EXPB0, 0x0010); + + /* Disable Reset R_CAL/RC_CAL Engine */ + phy_write_exp(phydev, CORE_EXPB0, 0x0000); + + /* write AFE_RXCONFIG_0 */ + phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19); + + /* write AFE_RXCONFIG_1 */ + phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f); + + /* write AFE_RX_LP_COUNTER */ + phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0); + + /* write AFE_HPF_TRIM_OTHERS */ + phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b); + + /* write AFTE_TX_CONFIG */ + phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800); + + return 0; +} + +static int bcm7xxx_28nm_config_init(struct phy_device *phydev) +{ + int ret; + + ret = bcm7445_config_init(phydev); + if (ret) + return ret; + + return bcm7xxx_28nm_afe_config_init(phydev); +} + +static int phy_set_clr_bits(struct phy_device *dev, int location, + int set_mask, int clr_mask) +{ + int v, ret; + + v = phy_read(dev, location); + if (v < 0) + return v; + + v &= ~clr_mask; + v |= set_mask; + + ret = phy_write(dev, location, v); + if (ret < 0) + return ret; + + return v; +} + +static int bcm7xxx_config_init(struct phy_device *phydev) +{ + int ret; + + /* Enable 64 clock MDIO */ + phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XX_64CLK_MDIO); + phy_read(phydev, MII_BCM7XXX_AUX_MODE); + + /* Workaround only required for 100Mbits/sec */ + if (!(phydev->dev_flags & PHY_BRCM_100MBPS_WAR)) + return 0; + + /* set shadow mode 2 */ + ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, + MII_BCM7XXX_SHD_MODE_2, MII_BCM7XXX_SHD_MODE_2); + if (ret < 0) + return ret; + + /* set iddq_clkbias */ + phy_write(phydev, MII_BCM7XXX_100TX_DISC, 0x0F00); + udelay(10); + + /* reset iddq_clkbias */ + phy_write(phydev, MII_BCM7XXX_100TX_DISC, 0x0C00); + + phy_write(phydev, MII_BCM7XXX_100TX_FALSE_CAR, 0x7555); + + /* reset shadow mode 2 */ + ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, MII_BCM7XXX_SHD_MODE_2, 0); + if (ret < 0) + return ret; + + return 0; +} + +/* Workaround for putting the PHY in IDDQ mode, required + * for all BCM7XXX PHYs + */ +static int bcm7xxx_suspend(struct phy_device *phydev) +{ + int ret; + const struct bcm7xxx_regs { + int reg; + u16 value; + } bcm7xxx_suspend_cfg[] = { + { MII_BCM7XXX_TEST, 0x008b }, + { MII_BCM7XXX_100TX_AUX_CTL, 0x01c0 }, + { MII_BCM7XXX_100TX_DISC, 0x7000 }, + { MII_BCM7XXX_TEST, 0x000f }, + { MII_BCM7XXX_100TX_AUX_CTL, 0x20d0 }, + { MII_BCM7XXX_TEST, 0x000b }, + }; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(bcm7xxx_suspend_cfg); i++) { + ret = phy_write(phydev, + bcm7xxx_suspend_cfg[i].reg, + bcm7xxx_suspend_cfg[i].value); + if (ret) + return ret; + } + + return 0; +} + +static int bcm7xxx_dummy_config_init(struct phy_device *phydev) +{ + return 0; +} + +static struct phy_driver bcm7xxx_driver[] = { +{ + .phy_id = PHY_ID_BCM7366, + .phy_id_mask = 0xfffffff0, + .name = "Broadcom BCM7366", + .features = PHY_GBIT_FEATURES | + SUPPORTED_Pause | SUPPORTED_Asym_Pause, + .flags = PHY_IS_INTERNAL, + .config_init = bcm7xxx_28nm_afe_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .suspend = bcm7xxx_suspend, + .resume = bcm7xxx_28nm_afe_config_init, + .driver = { .owner = THIS_MODULE }, +}, { + .phy_id = PHY_ID_BCM7439, + .phy_id_mask = 0xfffffff0, + .name = "Broadcom BCM7439", + .features = PHY_GBIT_FEATURES | + SUPPORTED_Pause | SUPPORTED_Asym_Pause, + .flags = PHY_IS_INTERNAL, + .config_init = bcm7xxx_28nm_afe_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .suspend = bcm7xxx_suspend, + .resume = bcm7xxx_28nm_afe_config_init, + .driver = { .owner = THIS_MODULE }, +}, { + .phy_id = PHY_ID_BCM7445, + .phy_id_mask = 0xfffffff0, + .name = "Broadcom BCM7445", + .features = PHY_GBIT_FEATURES | + SUPPORTED_Pause | SUPPORTED_Asym_Pause, + .flags = PHY_IS_INTERNAL, + .config_init = bcm7xxx_28nm_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .suspend = bcm7xxx_suspend, + .resume = bcm7xxx_28nm_config_init, + .driver = { .owner = THIS_MODULE }, +}, { + .name = "Broadcom BCM7XXX 28nm", + .phy_id = PHY_ID_BCM7XXX_28, + .phy_id_mask = PHY_BCM_OUI_MASK, + .features = PHY_GBIT_FEATURES | + SUPPORTED_Pause | SUPPORTED_Asym_Pause, + .flags = PHY_IS_INTERNAL, + .config_init = bcm7xxx_28nm_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .suspend = bcm7xxx_suspend, + .resume = bcm7xxx_28nm_config_init, + .driver = { .owner = THIS_MODULE }, +}, { + .phy_id = PHY_BCM_OUI_4, + .phy_id_mask = 0xffff0000, + .name = "Broadcom BCM7XXX 40nm", + .features = PHY_GBIT_FEATURES | + SUPPORTED_Pause | SUPPORTED_Asym_Pause, + .flags = PHY_IS_INTERNAL, + .config_init = bcm7xxx_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .suspend = bcm7xxx_suspend, + .resume = bcm7xxx_config_init, + .driver = { .owner = THIS_MODULE }, +}, { + .phy_id = PHY_BCM_OUI_5, + .phy_id_mask = 0xffffff00, + .name = "Broadcom BCM7XXX 65nm", + .features = PHY_BASIC_FEATURES | + SUPPORTED_Pause | SUPPORTED_Asym_Pause, + .flags = PHY_IS_INTERNAL, + .config_init = bcm7xxx_dummy_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .suspend = bcm7xxx_suspend, + .resume = bcm7xxx_config_init, + .driver = { .owner = THIS_MODULE }, +} }; + +static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = { + { PHY_ID_BCM7366, 0xfffffff0, }, + { PHY_ID_BCM7439, 0xfffffff0, }, + { PHY_ID_BCM7445, 0xfffffff0, }, + { PHY_ID_BCM7XXX_28, 0xfffffc00 }, + { PHY_BCM_OUI_4, 0xffff0000 }, + { PHY_BCM_OUI_5, 0xffffff00 }, + { } +}; + +static int __init bcm7xxx_phy_init(void) +{ + return phy_drivers_register(bcm7xxx_driver, + ARRAY_SIZE(bcm7xxx_driver)); +} + +static void __exit bcm7xxx_phy_exit(void) +{ + phy_drivers_unregister(bcm7xxx_driver, + ARRAY_SIZE(bcm7xxx_driver)); +} + +module_init(bcm7xxx_phy_init); +module_exit(bcm7xxx_phy_exit); + +MODULE_DEVICE_TABLE(mdio, bcm7xxx_tbl); + +MODULE_DESCRIPTION("Broadcom BCM7xxx internal PHY driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Broadcom Corporation"); diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index f8c90ea7510..34088d60da7 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -25,58 +25,6 @@ #define BRCM_PHY_REV(phydev) \ ((phydev)->drv->phy_id & ~((phydev)->drv->phy_id_mask)) - -#define MII_BCM54XX_ECR 0x10 /* BCM54xx extended control register */ -#define MII_BCM54XX_ECR_IM 0x1000 /* Interrupt mask */ -#define MII_BCM54XX_ECR_IF 0x0800 /* Interrupt force */ - -#define MII_BCM54XX_ESR 0x11 /* BCM54xx extended status register */ -#define MII_BCM54XX_ESR_IS 0x1000 /* Interrupt status */ - -#define MII_BCM54XX_EXP_DATA 0x15 /* Expansion register data */ -#define MII_BCM54XX_EXP_SEL 0x17 /* Expansion register select */ -#define MII_BCM54XX_EXP_SEL_SSD 0x0e00 /* Secondary SerDes select */ -#define MII_BCM54XX_EXP_SEL_ER 0x0f00 /* Expansion register select */ - -#define MII_BCM54XX_AUX_CTL 0x18 /* Auxiliary control register */ -#define MII_BCM54XX_ISR 0x1a /* BCM54xx interrupt status register */ -#define MII_BCM54XX_IMR 0x1b /* BCM54xx interrupt mask register */ -#define MII_BCM54XX_INT_CRCERR 0x0001 /* CRC error */ -#define MII_BCM54XX_INT_LINK 0x0002 /* Link status changed */ -#define MII_BCM54XX_INT_SPEED 0x0004 /* Link speed change */ -#define MII_BCM54XX_INT_DUPLEX 0x0008 /* Duplex mode changed */ -#define MII_BCM54XX_INT_LRS 0x0010 /* Local receiver status changed */ -#define MII_BCM54XX_INT_RRS 0x0020 /* Remote receiver status changed */ -#define MII_BCM54XX_INT_SSERR 0x0040 /* Scrambler synchronization error */ -#define MII_BCM54XX_INT_UHCD 0x0080 /* Unsupported HCD negotiated */ -#define MII_BCM54XX_INT_NHCD 0x0100 /* No HCD */ -#define MII_BCM54XX_INT_NHCDL 0x0200 /* No HCD link */ -#define MII_BCM54XX_INT_ANPR 0x0400 /* Auto-negotiation page received */ -#define MII_BCM54XX_INT_LC 0x0800 /* All counters below 128 */ -#define MII_BCM54XX_INT_HC 0x1000 /* Counter above 32768 */ -#define MII_BCM54XX_INT_MDIX 0x2000 /* MDIX status change */ -#define MII_BCM54XX_INT_PSERR 0x4000 /* Pair swap error */ - -#define MII_BCM54XX_SHD 0x1c /* 0x1c shadow registers */ -#define MII_BCM54XX_SHD_WRITE 0x8000 -#define MII_BCM54XX_SHD_VAL(x) ((x & 0x1f) << 10) -#define MII_BCM54XX_SHD_DATA(x) ((x & 0x3ff) << 0) - -/* - * AUXILIARY CONTROL SHADOW ACCESS REGISTERS. (PHY REG 0x18) - */ -#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x0000 -#define MII_BCM54XX_AUXCTL_ACTL_TX_6DB 0x0400 -#define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA 0x0800 - -#define MII_BCM54XX_AUXCTL_MISC_WREN 0x8000 -#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX 0x0200 -#define MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC 0x7000 -#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x0007 - -#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x0000 - - /* * Broadcom LED source encodings. These are used in BCM5461, BCM5481, * BCM5482, and possibly some others. diff --git a/drivers/net/phy/cicada.c b/drivers/net/phy/cicada.c index 313a0377f68..b57ce0cc965 100644 --- a/drivers/net/phy/cicada.c +++ b/drivers/net/phy/cicada.c @@ -92,8 +92,8 @@ static int cis820x_config_intr(struct phy_device *phydev) { int err; - if(phydev->interrupts == PHY_INTERRUPT_ENABLED) - err = phy_write(phydev, MII_CIS8201_IMASK, + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) + err = phy_write(phydev, MII_CIS8201_IMASK, MII_CIS8201_IMASK_MASK); else err = phy_write(phydev, MII_CIS8201_IMASK, 0); diff --git a/drivers/net/phy/davicom.c b/drivers/net/phy/davicom.c index 383e8338ad8..d2c08f625a4 100644 --- a/drivers/net/phy/davicom.c +++ b/drivers/net/phy/davicom.c @@ -72,7 +72,7 @@ static int dm9161_config_intr(struct phy_device *phydev) if (temp < 0) return temp; - if(PHY_INTERRUPT_ENABLED == phydev->interrupts ) + if (PHY_INTERRUPT_ENABLED == phydev->interrupts) temp &= ~(MII_DM9161_INTR_STOP); else temp |= MII_DM9161_INTR_STOP; diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c index 7490b6c866e..9408157a246 100644 --- a/drivers/net/phy/dp83640.c +++ b/drivers/net/phy/dp83640.c @@ -27,6 +27,7 @@ #include <linux/module.h> #include <linux/net_tstamp.h> #include <linux/netdevice.h> +#include <linux/if_vlan.h> #include <linux/phy.h> #include <linux/ptp_classify.h> #include <linux/ptp_clock_kernel.h> @@ -47,6 +48,7 @@ #define CAL_EVENT 7 #define CAL_TRIGGER 7 #define PER_TRIGGER 6 +#define DP83640_N_PINS 12 #define MII_DP83640_MICR 0x11 #define MII_DP83640_MISR 0x12 @@ -173,6 +175,37 @@ MODULE_PARM_DESC(chosen_phy, \ MODULE_PARM_DESC(gpio_tab, \ "Which GPIO line to use for which purpose: cal,perout,extts1,...,extts6"); +static void dp83640_gpio_defaults(struct ptp_pin_desc *pd) +{ + int i, index; + + for (i = 0; i < DP83640_N_PINS; i++) { + snprintf(pd[i].name, sizeof(pd[i].name), "GPIO%d", 1 + i); + pd[i].index = i; + } + + for (i = 0; i < GPIO_TABLE_SIZE; i++) { + if (gpio_tab[i] < 1 || gpio_tab[i] > DP83640_N_PINS) { + pr_err("gpio_tab[%d]=%hu out of range", i, gpio_tab[i]); + return; + } + } + + index = gpio_tab[CALIBRATE_GPIO] - 1; + pd[index].func = PTP_PF_PHYSYNC; + pd[index].chan = 0; + + index = gpio_tab[PEROUT_GPIO] - 1; + pd[index].func = PTP_PF_PEROUT; + pd[index].chan = 0; + + for (i = EXTTS0_GPIO; i < GPIO_TABLE_SIZE; i++) { + index = gpio_tab[i] - 1; + pd[index].func = PTP_PF_EXTTS; + pd[index].chan = i - EXTTS0_GPIO; + } +} + /* a list of clocks and a mutex to protect it */ static LIST_HEAD(phyter_clocks); static DEFINE_MUTEX(phyter_clocks_lock); @@ -266,15 +299,22 @@ static u64 phy2txts(struct phy_txts *p) return ns; } -static void periodic_output(struct dp83640_clock *clock, - struct ptp_clock_request *clkreq, bool on) +static int periodic_output(struct dp83640_clock *clock, + struct ptp_clock_request *clkreq, bool on) { struct dp83640_private *dp83640 = clock->chosen; struct phy_device *phydev = dp83640->phydev; - u32 sec, nsec, period; + u32 sec, nsec, pwidth; u16 gpio, ptp_trig, trigger, val; - gpio = on ? gpio_tab[PEROUT_GPIO] : 0; + if (on) { + gpio = 1 + ptp_find_pin(clock->ptp_clock, PTP_PF_PEROUT, 0); + if (gpio < 1) + return -EINVAL; + } else { + gpio = 0; + } + trigger = PER_TRIGGER; ptp_trig = TRIG_WR | @@ -291,13 +331,14 @@ static void periodic_output(struct dp83640_clock *clock, ext_write(0, phydev, PAGE5, PTP_TRIG, ptp_trig); ext_write(0, phydev, PAGE4, PTP_CTL, val); mutex_unlock(&clock->extreg_lock); - return; + return 0; } sec = clkreq->perout.start.sec; nsec = clkreq->perout.start.nsec; - period = clkreq->perout.period.sec * 1000000000UL; - period += clkreq->perout.period.nsec; + pwidth = clkreq->perout.period.sec * 1000000000UL; + pwidth += clkreq->perout.period.nsec; + pwidth /= 2; mutex_lock(&clock->extreg_lock); @@ -310,8 +351,8 @@ static void periodic_output(struct dp83640_clock *clock, ext_write(0, phydev, PAGE4, PTP_TDR, nsec >> 16); /* ns[31:16] */ ext_write(0, phydev, PAGE4, PTP_TDR, sec & 0xffff); /* sec[15:0] */ ext_write(0, phydev, PAGE4, PTP_TDR, sec >> 16); /* sec[31:16] */ - ext_write(0, phydev, PAGE4, PTP_TDR, period & 0xffff); /* ns[15:0] */ - ext_write(0, phydev, PAGE4, PTP_TDR, period >> 16); /* ns[31:16] */ + ext_write(0, phydev, PAGE4, PTP_TDR, pwidth & 0xffff); /* ns[15:0] */ + ext_write(0, phydev, PAGE4, PTP_TDR, pwidth >> 16); /* ns[31:16] */ /*enable trigger*/ val &= ~TRIG_LOAD; @@ -319,6 +360,7 @@ static void periodic_output(struct dp83640_clock *clock, ext_write(0, phydev, PAGE4, PTP_CTL, val); mutex_unlock(&clock->extreg_lock); + return 0; } /* ptp clock methods */ @@ -424,20 +466,26 @@ static int ptp_dp83640_enable(struct ptp_clock_info *ptp, struct dp83640_clock *clock = container_of(ptp, struct dp83640_clock, caps); struct phy_device *phydev = clock->chosen->phydev; - int index; + unsigned int index; u16 evnt, event_num, gpio_num; switch (rq->type) { case PTP_CLK_REQ_EXTTS: index = rq->extts.index; - if (index < 0 || index >= N_EXT_TS) + if (index >= N_EXT_TS) return -EINVAL; event_num = EXT_EVENT + index; evnt = EVNT_WR | (event_num & EVNT_SEL_MASK) << EVNT_SEL_SHIFT; if (on) { - gpio_num = gpio_tab[EXTTS0_GPIO + index]; + gpio_num = 1 + ptp_find_pin(clock->ptp_clock, + PTP_PF_EXTTS, index); + if (gpio_num < 1) + return -EINVAL; evnt |= (gpio_num & EVNT_GPIO_MASK) << EVNT_GPIO_SHIFT; - evnt |= EVNT_RISE; + if (rq->extts.flags & PTP_FALLING_EDGE) + evnt |= EVNT_FALL; + else + evnt |= EVNT_RISE; } ext_write(0, phydev, PAGE5, PTP_EVNT, evnt); return 0; @@ -445,8 +493,7 @@ static int ptp_dp83640_enable(struct ptp_clock_info *ptp, case PTP_CLK_REQ_PEROUT: if (rq->perout.index != 0) return -EINVAL; - periodic_output(clock, rq, on); - return 0; + return periodic_output(clock, rq, on); default: break; @@ -455,6 +502,12 @@ static int ptp_dp83640_enable(struct ptp_clock_info *ptp, return -EOPNOTSUPP; } +static int ptp_dp83640_verify(struct ptp_clock_info *ptp, unsigned int pin, + enum ptp_pin_function func, unsigned int chan) +{ + return 0; +} + static u8 status_frame_dst[6] = { 0x01, 0x1B, 0x19, 0x00, 0x00, 0x00 }; static u8 status_frame_src[6] = { 0x08, 0x00, 0x17, 0x0B, 0x6B, 0x0F }; @@ -851,8 +904,8 @@ static int match(struct sk_buff *skb, unsigned int type, struct rxts *rxts) seqid = (u16 *)(data + offset + OFF_PTP_SEQUENCE_ID); - return (rxts->msgtype == (*msgtype & 0xf) && - rxts->seqid == ntohs(*seqid)); + return rxts->msgtype == (*msgtype & 0xf) && + rxts->seqid == ntohs(*seqid); } static void dp83640_free_clocks(void) @@ -872,6 +925,7 @@ static void dp83640_free_clocks(void) mutex_destroy(&clock->extreg_lock); mutex_destroy(&clock->clock_lock); put_device(&clock->bus->dev); + kfree(clock->caps.pin_config); kfree(clock); } @@ -891,12 +945,18 @@ static void dp83640_clock_init(struct dp83640_clock *clock, struct mii_bus *bus) clock->caps.n_alarm = 0; clock->caps.n_ext_ts = N_EXT_TS; clock->caps.n_per_out = 1; + clock->caps.n_pins = DP83640_N_PINS; clock->caps.pps = 0; clock->caps.adjfreq = ptp_dp83640_adjfreq; clock->caps.adjtime = ptp_dp83640_adjtime; clock->caps.gettime = ptp_dp83640_gettime; clock->caps.settime = ptp_dp83640_settime; clock->caps.enable = ptp_dp83640_enable; + clock->caps.verify = ptp_dp83640_verify; + /* + * Convert the module param defaults into a dynamic pin configuration. + */ + dp83640_gpio_defaults(clock->caps.pin_config); /* * Get a reference to this bus instance. */ @@ -947,6 +1007,13 @@ static struct dp83640_clock *dp83640_clock_get_bus(struct mii_bus *bus) if (!clock) goto out; + clock->caps.pin_config = kzalloc(sizeof(struct ptp_pin_desc) * + DP83640_N_PINS, GFP_KERNEL); + if (!clock->caps.pin_config) { + kfree(clock); + clock = NULL; + goto out; + } dp83640_clock_init(clock, bus); list_add_tail(&phyter_clocks, &clock->list); out: @@ -1003,11 +1070,6 @@ static int dp83640_probe(struct phy_device *phydev) } else list_add_tail(&dp83640->list, &clock->phylist); - if (clock->chosen && !list_empty(&clock->phylist)) - recalibrate(clock); - else - enable_broadcast(dp83640->phydev, clock->page, 1); - dp83640_clock_put(clock); return 0; @@ -1058,6 +1120,21 @@ static void dp83640_remove(struct phy_device *phydev) kfree(dp83640); } +static int dp83640_config_init(struct phy_device *phydev) +{ + struct dp83640_private *dp83640 = phydev->priv; + struct dp83640_clock *clock = dp83640->clock; + + if (clock->chosen && !list_empty(&clock->phylist)) + recalibrate(clock); + else + enable_broadcast(phydev, clock->page, 1); + + enable_status_frames(phydev, true); + ext_write(0, phydev, PAGE4, PTP_CTL, PTP_ENABLE); + return 0; +} + static int dp83640_ack_interrupt(struct phy_device *phydev) { int err = phy_read(phydev, MII_DP83640_MISR); @@ -1195,11 +1272,6 @@ static int dp83640_hwtstamp(struct phy_device *phydev, struct ifreq *ifr) mutex_lock(&dp83640->clock->extreg_lock); - if (dp83640->hwts_tx_en || dp83640->hwts_rx_en) { - enable_status_frames(phydev, true); - ext_write(0, phydev, PAGE4, PTP_CTL, PTP_ENABLE); - } - ext_write(0, phydev, PAGE5, PTP_TXCFG0, txcfg0); ext_write(0, phydev, PAGE5, PTP_RXCFG0, rxcfg0); @@ -1251,15 +1323,15 @@ static bool dp83640_rxtstamp(struct phy_device *phydev, { struct dp83640_private *dp83640 = phydev->priv; - if (!dp83640->hwts_rx_en) - return false; - if (is_status_frame(skb, type)) { decode_status_frame(dp83640, skb); kfree_skb(skb); return true; } + if (!dp83640->hwts_rx_en) + return false; + SKB_PTP_TYPE(skb) = type; skb_queue_tail(&dp83640->rx_queue, skb); schedule_work(&dp83640->ts_work); @@ -1281,6 +1353,7 @@ static void dp83640_txtstamp(struct phy_device *phydev, } /* fall through */ case HWTSTAMP_TX_ON: + skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; skb_queue_tail(&dp83640->tx_queue, skb); schedule_work(&dp83640->ts_work); break; @@ -1330,6 +1403,7 @@ static struct phy_driver dp83640_driver = { .flags = PHY_HAS_INTERRUPT, .probe = dp83640_probe, .remove = dp83640_remove, + .config_init = dp83640_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, .ack_interrupt = dp83640_ack_interrupt, @@ -1353,7 +1427,7 @@ static void __exit dp83640_exit(void) } MODULE_DESCRIPTION("National Semiconductor DP83640 PHY driver"); -MODULE_AUTHOR("Richard Cochran <richardcochran@gmail.at>"); +MODULE_AUTHOR("Richard Cochran <richardcochran@gmail.com>"); MODULE_LICENSE("GPL"); module_init(dp83640_init); diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c index ba55adfc7aa..d60d875cb44 100644 --- a/drivers/net/phy/fixed.c +++ b/drivers/net/phy/fixed.c @@ -21,6 +21,7 @@ #include <linux/phy_fixed.h> #include <linux/err.h> #include <linux/slab.h> +#include <linux/of.h> #define MII_REGS_NUM 29 @@ -31,7 +32,7 @@ struct fixed_mdio_bus { }; struct fixed_phy { - int id; + int addr; u16 regs[MII_REGS_NUM]; struct phy_device *phydev; struct fixed_phy_status status; @@ -104,8 +105,8 @@ static int fixed_phy_update_regs(struct fixed_phy *fp) if (fp->status.asym_pause) lpa |= LPA_PAUSE_ASYM; - fp->regs[MII_PHYSID1] = fp->id >> 16; - fp->regs[MII_PHYSID2] = fp->id; + fp->regs[MII_PHYSID1] = 0; + fp->regs[MII_PHYSID2] = 0; fp->regs[MII_BMSR] = bmsr; fp->regs[MII_BMCR] = bmcr; @@ -115,7 +116,7 @@ static int fixed_phy_update_regs(struct fixed_phy *fp) return 0; } -static int fixed_mdio_read(struct mii_bus *bus, int phy_id, int reg_num) +static int fixed_mdio_read(struct mii_bus *bus, int phy_addr, int reg_num) { struct fixed_mdio_bus *fmb = bus->priv; struct fixed_phy *fp; @@ -124,7 +125,7 @@ static int fixed_mdio_read(struct mii_bus *bus, int phy_id, int reg_num) return -1; list_for_each_entry(fp, &fmb->phys, node) { - if (fp->id == phy_id) { + if (fp->addr == phy_addr) { /* Issue callback if user registered it. */ if (fp->link_update) { fp->link_update(fp->phydev->attached_dev, @@ -138,7 +139,7 @@ static int fixed_mdio_read(struct mii_bus *bus, int phy_id, int reg_num) return 0xFFFF; } -static int fixed_mdio_write(struct mii_bus *bus, int phy_id, int reg_num, +static int fixed_mdio_write(struct mii_bus *bus, int phy_addr, int reg_num, u16 val) { return 0; @@ -160,7 +161,7 @@ int fixed_phy_set_link_update(struct phy_device *phydev, return -EINVAL; list_for_each_entry(fp, &fmb->phys, node) { - if (fp->id == phydev->phy_id) { + if (fp->addr == phydev->addr) { fp->link_update = link_update; fp->phydev = phydev; return 0; @@ -171,7 +172,7 @@ int fixed_phy_set_link_update(struct phy_device *phydev, } EXPORT_SYMBOL_GPL(fixed_phy_set_link_update); -int fixed_phy_add(unsigned int irq, int phy_id, +int fixed_phy_add(unsigned int irq, int phy_addr, struct fixed_phy_status *status) { int ret; @@ -184,9 +185,9 @@ int fixed_phy_add(unsigned int irq, int phy_id, memset(fp->regs, 0xFF, sizeof(fp->regs[0]) * MII_REGS_NUM); - fmb->irqs[phy_id] = irq; + fmb->irqs[phy_addr] = irq; - fp->id = phy_id; + fp->addr = phy_addr; fp->status = *status; ret = fixed_phy_update_regs(fp); @@ -203,6 +204,66 @@ err_regs: } EXPORT_SYMBOL_GPL(fixed_phy_add); +void fixed_phy_del(int phy_addr) +{ + struct fixed_mdio_bus *fmb = &platform_fmb; + struct fixed_phy *fp, *tmp; + + list_for_each_entry_safe(fp, tmp, &fmb->phys, node) { + if (fp->addr == phy_addr) { + list_del(&fp->node); + kfree(fp); + return; + } + } +} +EXPORT_SYMBOL_GPL(fixed_phy_del); + +static int phy_fixed_addr; +static DEFINE_SPINLOCK(phy_fixed_addr_lock); + +int fixed_phy_register(unsigned int irq, + struct fixed_phy_status *status, + struct device_node *np) +{ + struct fixed_mdio_bus *fmb = &platform_fmb; + struct phy_device *phy; + int phy_addr; + int ret; + + /* Get the next available PHY address, up to PHY_MAX_ADDR */ + spin_lock(&phy_fixed_addr_lock); + if (phy_fixed_addr == PHY_MAX_ADDR) { + spin_unlock(&phy_fixed_addr_lock); + return -ENOSPC; + } + phy_addr = phy_fixed_addr++; + spin_unlock(&phy_fixed_addr_lock); + + ret = fixed_phy_add(PHY_POLL, phy_addr, status); + if (ret < 0) + return ret; + + phy = get_phy_device(fmb->mii_bus, phy_addr, false); + if (!phy || IS_ERR(phy)) { + fixed_phy_del(phy_addr); + return -EINVAL; + } + + of_node_get(np); + phy->dev.of_node = np; + + ret = phy_device_register(phy); + if (ret) { + phy_device_free(phy); + of_node_put(np); + fixed_phy_del(phy_addr); + return ret; + } + + return 0; +} + static int __init fixed_mdio_bus_init(void) { struct fixed_mdio_bus *fmb = &platform_fmb; diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c index b5ddd5077a8..97bf58bf493 100644 --- a/drivers/net/phy/icplus.c +++ b/drivers/net/phy/icplus.c @@ -48,7 +48,7 @@ MODULE_LICENSE("GPL"); static int ip175c_config_init(struct phy_device *phydev) { int err, i; - static int full_reset_performed = 0; + static int full_reset_performed; if (full_reset_performed == 0) { diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c index ff2e45e9cb5..9108f319170 100644 --- a/drivers/net/phy/lxt.c +++ b/drivers/net/phy/lxt.c @@ -82,7 +82,7 @@ static int lxt970_config_intr(struct phy_device *phydev) { int err; - if(phydev->interrupts == PHY_INTERRUPT_ENABLED) + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) err = phy_write(phydev, MII_LXT970_IER, MII_LXT970_IER_IEN); else err = phy_write(phydev, MII_LXT970_IER, 0); @@ -114,7 +114,7 @@ static int lxt971_config_intr(struct phy_device *phydev) { int err; - if(phydev->interrupts == PHY_INTERRUPT_ENABLED) + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) err = phy_write(phydev, MII_LXT971_IER, MII_LXT971_IER_IEN); else err = phy_write(phydev, MII_LXT971_IER, 0); diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 2e91477362d..bd37e45c89c 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -34,9 +34,9 @@ #include <linux/marvell_phy.h> #include <linux/of.h> -#include <asm/io.h> +#include <linux/io.h> #include <asm/irq.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #define MII_MARVELL_PHY_PAGE 22 @@ -894,6 +894,8 @@ static struct phy_driver marvell_drivers[] = { .read_status = &genphy_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, + .resume = &genphy_resume, + .suspend = &genphy_suspend, .driver = { .owner = THIS_MODULE }, }, { @@ -907,6 +909,8 @@ static struct phy_driver marvell_drivers[] = { .read_status = &genphy_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, + .resume = &genphy_resume, + .suspend = &genphy_suspend, .driver = { .owner = THIS_MODULE }, }, { @@ -920,6 +924,8 @@ static struct phy_driver marvell_drivers[] = { .read_status = &marvell_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, + .resume = &genphy_resume, + .suspend = &genphy_suspend, .driver = { .owner = THIS_MODULE }, }, { @@ -933,6 +939,8 @@ static struct phy_driver marvell_drivers[] = { .read_status = &genphy_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, + .resume = &genphy_resume, + .suspend = &genphy_suspend, .driver = {.owner = THIS_MODULE,}, }, { @@ -946,6 +954,8 @@ static struct phy_driver marvell_drivers[] = { .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, .did_interrupt = &m88e1121_did_interrupt, + .resume = &genphy_resume, + .suspend = &genphy_suspend, .driver = { .owner = THIS_MODULE }, }, { @@ -961,6 +971,8 @@ static struct phy_driver marvell_drivers[] = { .did_interrupt = &m88e1121_did_interrupt, .get_wol = &m88e1318_get_wol, .set_wol = &m88e1318_set_wol, + .resume = &genphy_resume, + .suspend = &genphy_suspend, .driver = { .owner = THIS_MODULE }, }, { @@ -974,6 +986,8 @@ static struct phy_driver marvell_drivers[] = { .read_status = &genphy_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, + .resume = &genphy_resume, + .suspend = &genphy_suspend, .driver = { .owner = THIS_MODULE }, }, { @@ -987,6 +1001,8 @@ static struct phy_driver marvell_drivers[] = { .read_status = &genphy_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, + .resume = &genphy_resume, + .suspend = &genphy_suspend, .driver = { .owner = THIS_MODULE }, }, { @@ -1000,6 +1016,8 @@ static struct phy_driver marvell_drivers[] = { .read_status = &genphy_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, + .resume = &genphy_resume, + .suspend = &genphy_suspend, .driver = { .owner = THIS_MODULE }, }, { @@ -1013,6 +1031,8 @@ static struct phy_driver marvell_drivers[] = { .read_status = &genphy_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, + .resume = &genphy_resume, + .suspend = &genphy_suspend, .driver = { .owner = THIS_MODULE }, }, { @@ -1026,6 +1046,8 @@ static struct phy_driver marvell_drivers[] = { .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, .did_interrupt = &m88e1121_did_interrupt, + .resume = &genphy_resume, + .suspend = &genphy_suspend, .driver = { .owner = THIS_MODULE }, }, }; diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c index 8004acbef2c..5f1a2250018 100644 --- a/drivers/net/phy/mdio-gpio.c +++ b/drivers/net/phy/mdio-gpio.c @@ -22,7 +22,6 @@ #include <linux/module.h> #include <linux/slab.h> -#include <linux/init.h> #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/gpio.h> @@ -33,29 +32,39 @@ struct mdio_gpio_info { struct mdiobb_ctrl ctrl; - int mdc, mdio; + int mdc, mdio, mdo; + int mdc_active_low, mdio_active_low, mdo_active_low; }; static void *mdio_gpio_of_get_data(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; struct mdio_gpio_platform_data *pdata; + enum of_gpio_flags flags; int ret; pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) return NULL; - ret = of_get_gpio(np, 0); + ret = of_get_gpio_flags(np, 0, &flags); if (ret < 0) return NULL; pdata->mdc = ret; + pdata->mdc_active_low = flags & OF_GPIO_ACTIVE_LOW; - ret = of_get_gpio(np, 1); + ret = of_get_gpio_flags(np, 1, &flags); if (ret < 0) return NULL; pdata->mdio = ret; + pdata->mdio_active_low = flags & OF_GPIO_ACTIVE_LOW; + + ret = of_get_gpio_flags(np, 2, &flags); + if (ret > 0) { + pdata->mdo = ret; + pdata->mdo_active_low = flags & OF_GPIO_ACTIVE_LOW; + } return pdata; } @@ -65,8 +74,19 @@ static void mdio_dir(struct mdiobb_ctrl *ctrl, int dir) struct mdio_gpio_info *bitbang = container_of(ctrl, struct mdio_gpio_info, ctrl); + if (bitbang->mdo) { + /* Separate output pin. Always set its value to high + * when changing direction. If direction is input, + * assume the pin serves as pull-up. If direction is + * output, the default value is high. + */ + gpio_set_value(bitbang->mdo, 1 ^ bitbang->mdo_active_low); + return; + } + if (dir) - gpio_direction_output(bitbang->mdio, 1); + gpio_direction_output(bitbang->mdio, + 1 ^ bitbang->mdio_active_low); else gpio_direction_input(bitbang->mdio); } @@ -76,7 +96,7 @@ static int mdio_get(struct mdiobb_ctrl *ctrl) struct mdio_gpio_info *bitbang = container_of(ctrl, struct mdio_gpio_info, ctrl); - return gpio_get_value(bitbang->mdio); + return gpio_get_value(bitbang->mdio) ^ bitbang->mdio_active_low; } static void mdio_set(struct mdiobb_ctrl *ctrl, int what) @@ -84,7 +104,10 @@ static void mdio_set(struct mdiobb_ctrl *ctrl, int what) struct mdio_gpio_info *bitbang = container_of(ctrl, struct mdio_gpio_info, ctrl); - gpio_set_value(bitbang->mdio, what); + if (bitbang->mdo) + gpio_set_value(bitbang->mdo, what ^ bitbang->mdo_active_low); + else + gpio_set_value(bitbang->mdio, what ^ bitbang->mdio_active_low); } static void mdc_set(struct mdiobb_ctrl *ctrl, int what) @@ -92,7 +115,7 @@ static void mdc_set(struct mdiobb_ctrl *ctrl, int what) struct mdio_gpio_info *bitbang = container_of(ctrl, struct mdio_gpio_info, ctrl); - gpio_set_value(bitbang->mdc, what); + gpio_set_value(bitbang->mdc, what ^ bitbang->mdc_active_low); } static struct mdiobb_ops mdio_gpio_ops = { @@ -111,18 +134,22 @@ static struct mii_bus *mdio_gpio_bus_init(struct device *dev, struct mdio_gpio_info *bitbang; int i; - bitbang = kzalloc(sizeof(*bitbang), GFP_KERNEL); + bitbang = devm_kzalloc(dev, sizeof(*bitbang), GFP_KERNEL); if (!bitbang) goto out; bitbang->ctrl.ops = &mdio_gpio_ops; bitbang->ctrl.reset = pdata->reset; bitbang->mdc = pdata->mdc; + bitbang->mdc_active_low = pdata->mdc_active_low; bitbang->mdio = pdata->mdio; + bitbang->mdio_active_low = pdata->mdio_active_low; + bitbang->mdo = pdata->mdo; + bitbang->mdo_active_low = pdata->mdo_active_low; new_bus = alloc_mdio_bitbang(&bitbang->ctrl); if (!new_bus) - goto out_free_bitbang; + goto out; new_bus->name = "GPIO Bitbanged MDIO", @@ -139,11 +166,18 @@ static struct mii_bus *mdio_gpio_bus_init(struct device *dev, snprintf(new_bus->id, MII_BUS_ID_SIZE, "gpio-%x", bus_id); - if (gpio_request(bitbang->mdc, "mdc")) + if (devm_gpio_request(dev, bitbang->mdc, "mdc")) + goto out_free_bus; + + if (devm_gpio_request(dev, bitbang->mdio, "mdio")) goto out_free_bus; - if (gpio_request(bitbang->mdio, "mdio")) - goto out_free_mdc; + if (bitbang->mdo) { + if (devm_gpio_request(dev, bitbang->mdo, "mdo")) + goto out_free_bus; + gpio_direction_output(bitbang->mdo, 1); + gpio_direction_input(bitbang->mdio); + } gpio_direction_output(bitbang->mdc, 0); @@ -151,12 +185,8 @@ static struct mii_bus *mdio_gpio_bus_init(struct device *dev, return new_bus; -out_free_mdc: - gpio_free(bitbang->mdc); out_free_bus: free_mdio_bitbang(new_bus); -out_free_bitbang: - kfree(bitbang); out: return NULL; } @@ -164,13 +194,8 @@ out: static void mdio_gpio_bus_deinit(struct device *dev) { struct mii_bus *bus = dev_get_drvdata(dev); - struct mdio_gpio_info *bitbang = bus->priv; - dev_set_drvdata(dev, NULL); - gpio_free(bitbang->mdio); - gpio_free(bitbang->mdc); free_mdio_bitbang(bus); - kfree(bitbang); } static void mdio_gpio_bus_destroy(struct device *dev) @@ -190,6 +215,10 @@ static int mdio_gpio_probe(struct platform_device *pdev) if (pdev->dev.of_node) { pdata = mdio_gpio_of_get_data(pdev); bus_id = of_alias_get_id(pdev->dev.of_node, "mdio-gpio"); + if (bus_id < 0) { + dev_warn(&pdev->dev, "failed to get alias id\n"); + bus_id = 0; + } } else { pdata = dev_get_platdata(&pdev->dev); bus_id = pdev->id; diff --git a/drivers/net/phy/mdio-moxart.c b/drivers/net/phy/mdio-moxart.c new file mode 100644 index 00000000000..f1fc51f655d --- /dev/null +++ b/drivers/net/phy/mdio-moxart.c @@ -0,0 +1,200 @@ +/* MOXA ART Ethernet (RTL8201CP) MDIO interface driver + * + * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of_address.h> +#include <linux/of_mdio.h> +#include <linux/phy.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> + +#define REG_PHY_CTRL 0 +#define REG_PHY_WRITE_DATA 4 + +/* REG_PHY_CTRL */ +#define MIIWR BIT(27) /* init write sequence (auto cleared)*/ +#define MIIRD BIT(26) +#define REGAD_MASK 0x3e00000 +#define PHYAD_MASK 0x1f0000 +#define MIIRDATA_MASK 0xffff + +/* REG_PHY_WRITE_DATA */ +#define MIIWDATA_MASK 0xffff + +struct moxart_mdio_data { + void __iomem *base; +}; + +static int moxart_mdio_read(struct mii_bus *bus, int mii_id, int regnum) +{ + struct moxart_mdio_data *data = bus->priv; + u32 ctrl = 0; + unsigned int count = 5; + + dev_dbg(&bus->dev, "%s\n", __func__); + + ctrl |= MIIRD | ((mii_id << 16) & PHYAD_MASK) | + ((regnum << 21) & REGAD_MASK); + + writel(ctrl, data->base + REG_PHY_CTRL); + + do { + ctrl = readl(data->base + REG_PHY_CTRL); + + if (!(ctrl & MIIRD)) + return ctrl & MIIRDATA_MASK; + + mdelay(10); + count--; + } while (count > 0); + + dev_dbg(&bus->dev, "%s timed out\n", __func__); + + return -ETIMEDOUT; +} + +static int moxart_mdio_write(struct mii_bus *bus, int mii_id, + int regnum, u16 value) +{ + struct moxart_mdio_data *data = bus->priv; + u32 ctrl = 0; + unsigned int count = 5; + + dev_dbg(&bus->dev, "%s\n", __func__); + + ctrl |= MIIWR | ((mii_id << 16) & PHYAD_MASK) | + ((regnum << 21) & REGAD_MASK); + + value &= MIIWDATA_MASK; + + writel(value, data->base + REG_PHY_WRITE_DATA); + writel(ctrl, data->base + REG_PHY_CTRL); + + do { + ctrl = readl(data->base + REG_PHY_CTRL); + + if (!(ctrl & MIIWR)) + return 0; + + mdelay(10); + count--; + } while (count > 0); + + dev_dbg(&bus->dev, "%s timed out\n", __func__); + + return -ETIMEDOUT; +} + +static int moxart_mdio_reset(struct mii_bus *bus) +{ + int data, i; + + for (i = 0; i < PHY_MAX_ADDR; i++) { + data = moxart_mdio_read(bus, i, MII_BMCR); + if (data < 0) + continue; + + data |= BMCR_RESET; + if (moxart_mdio_write(bus, i, MII_BMCR, data) < 0) + continue; + } + + return 0; +} + +static int moxart_mdio_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct mii_bus *bus; + struct moxart_mdio_data *data; + struct resource *res; + int ret, i; + + bus = mdiobus_alloc_size(sizeof(*data)); + if (!bus) + return -ENOMEM; + + bus->name = "MOXA ART Ethernet MII"; + bus->read = &moxart_mdio_read; + bus->write = &moxart_mdio_write; + bus->reset = &moxart_mdio_reset; + snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d-mii", pdev->name, pdev->id); + bus->parent = &pdev->dev; + + bus->irq = devm_kzalloc(&pdev->dev, sizeof(int) * PHY_MAX_ADDR, + GFP_KERNEL); + if (!bus->irq) { + ret = -ENOMEM; + goto err_out_free_mdiobus; + } + + /* Setting PHY_IGNORE_INTERRUPT here even if it has no effect, + * of_mdiobus_register() sets these PHY_POLL. + * Ideally, the interrupt from MAC controller could be used to + * detect link state changes, not polling, i.e. if there was + * a way phy_driver could set PHY_HAS_INTERRUPT but have that + * interrupt handled in ethernet drivercode. + */ + for (i = 0; i < PHY_MAX_ADDR; i++) + bus->irq[i] = PHY_IGNORE_INTERRUPT; + + data = bus->priv; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + data->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(data->base)) { + ret = PTR_ERR(data->base); + goto err_out_free_mdiobus; + } + + ret = of_mdiobus_register(bus, np); + if (ret < 0) + goto err_out_free_mdiobus; + + platform_set_drvdata(pdev, bus); + + return 0; + +err_out_free_mdiobus: + mdiobus_free(bus); + return ret; +} + +static int moxart_mdio_remove(struct platform_device *pdev) +{ + struct mii_bus *bus = platform_get_drvdata(pdev); + + mdiobus_unregister(bus); + mdiobus_free(bus); + + return 0; +} + +static const struct of_device_id moxart_mdio_dt_ids[] = { + { .compatible = "moxa,moxart-mdio" }, + { } +}; +MODULE_DEVICE_TABLE(of, moxart_mdio_dt_ids); + +static struct platform_driver moxart_mdio_driver = { + .probe = moxart_mdio_probe, + .remove = moxart_mdio_remove, + .driver = { + .name = "moxart-mdio", + .of_match_table = moxart_mdio_dt_ids, + }, +}; + +module_platform_driver(moxart_mdio_driver); + +MODULE_DESCRIPTION("MOXA ART MDIO interface driver"); +MODULE_AUTHOR("Jonas Jensen <jonas.jensen@gmail.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/phy/mdio-mux-gpio.c b/drivers/net/phy/mdio-mux-gpio.c index d2dd9e473e2..09669516349 100644 --- a/drivers/net/phy/mdio-mux-gpio.c +++ b/drivers/net/phy/mdio-mux-gpio.c @@ -10,7 +10,6 @@ #include <linux/device.h> #include <linux/of_mdio.h> #include <linux/module.h> -#include <linux/init.h> #include <linux/phy.h> #include <linux/mdio-mux.h> #include <linux/of_gpio.h> diff --git a/drivers/net/phy/mdio-mux-mmioreg.c b/drivers/net/phy/mdio-mux-mmioreg.c index f8e305d8da7..1656785ff33 100644 --- a/drivers/net/phy/mdio-mux-mmioreg.c +++ b/drivers/net/phy/mdio-mux-mmioreg.c @@ -15,7 +15,6 @@ #include <linux/of_address.h> #include <linux/of_mdio.h> #include <linux/module.h> -#include <linux/init.h> #include <linux/phy.h> #include <linux/mdio-mux.h> diff --git a/drivers/net/phy/mdio-octeon.c b/drivers/net/phy/mdio-octeon.c index 6aee02ed97a..a51ed92fbad 100644 --- a/drivers/net/phy/mdio-octeon.c +++ b/drivers/net/phy/mdio-octeon.c @@ -10,7 +10,6 @@ #include <linux/of_mdio.h> #include <linux/delay.h> #include <linux/module.h> -#include <linux/init.h> #include <linux/gfp.h> #include <linux/phy.h> #include <linux/io.h> diff --git a/drivers/net/phy/mdio-sun4i.c b/drivers/net/phy/mdio-sun4i.c index 18969b3ad8b..15bc7f9ea22 100644 --- a/drivers/net/phy/mdio-sun4i.c +++ b/drivers/net/phy/mdio-sun4i.c @@ -13,7 +13,6 @@ */ #include <linux/delay.h> -#include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/mutex.h> @@ -91,11 +90,6 @@ static int sun4i_mdio_write(struct mii_bus *bus, int mii_id, int regnum, return 0; } -static int sun4i_mdio_reset(struct mii_bus *bus) -{ - return 0; -} - static int sun4i_mdio_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; @@ -111,7 +105,6 @@ static int sun4i_mdio_probe(struct platform_device *pdev) bus->name = "sun4i_mii_bus"; bus->read = &sun4i_mdio_read; bus->write = &sun4i_mdio_write; - bus->reset = &sun4i_mdio_reset; snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(&pdev->dev)); bus->parent = &pdev->dev; @@ -171,6 +164,9 @@ static int sun4i_mdio_remove(struct platform_device *pdev) } static const struct of_device_id sun4i_mdio_dt_ids[] = { + { .compatible = "allwinner,sun4i-a10-mdio" }, + + /* Deprecated */ { .compatible = "allwinner,sun4i-mdio" }, { } }; diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index dc920974204..203651ebccb 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -1,7 +1,4 @@ -/* - * drivers/net/phy/mdio_bus.c - * - * MDIO Bus interface +/* MDIO Bus interface * * Author: Andy Fleming * @@ -36,10 +33,10 @@ #include <linux/mii.h> #include <linux/ethtool.h> #include <linux/phy.h> +#include <linux/io.h> +#include <linux/uaccess.h> -#include <asm/io.h> #include <asm/irq.h> -#include <asm/uaccess.h> /** * mdiobus_alloc_size - allocate a mii_bus structure @@ -72,6 +69,73 @@ struct mii_bus *mdiobus_alloc_size(size_t size) } EXPORT_SYMBOL(mdiobus_alloc_size); +static void _devm_mdiobus_free(struct device *dev, void *res) +{ + mdiobus_free(*(struct mii_bus **)res); +} + +static int devm_mdiobus_match(struct device *dev, void *res, void *data) +{ + struct mii_bus **r = res; + + if (WARN_ON(!r || !*r)) + return 0; + + return *r == data; +} + +/** + * devm_mdiobus_alloc_size - Resource-managed mdiobus_alloc_size() + * @dev: Device to allocate mii_bus for + * @sizeof_priv: Space to allocate for private structure. + * + * Managed mdiobus_alloc_size. mii_bus allocated with this function is + * automatically freed on driver detach. + * + * If an mii_bus allocated with this function needs to be freed separately, + * devm_mdiobus_free() must be used. + * + * RETURNS: + * Pointer to allocated mii_bus on success, NULL on failure. + */ +struct mii_bus *devm_mdiobus_alloc_size(struct device *dev, int sizeof_priv) +{ + struct mii_bus **ptr, *bus; + + ptr = devres_alloc(_devm_mdiobus_free, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return NULL; + + /* use raw alloc_dr for kmalloc caller tracing */ + bus = mdiobus_alloc_size(sizeof_priv); + if (bus) { + *ptr = bus; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return bus; +} +EXPORT_SYMBOL_GPL(devm_mdiobus_alloc_size); + +/** + * devm_mdiobus_free - Resource-managed mdiobus_free() + * @dev: Device this mii_bus belongs to + * @bus: the mii_bus associated with the device + * + * Free mii_bus allocated with devm_mdiobus_alloc_size(). + */ +void devm_mdiobus_free(struct device *dev, struct mii_bus *bus) +{ + int rc; + + rc = devres_release(dev, _devm_mdiobus_free, + devm_mdiobus_match, bus); + WARN_ON(rc); +} +EXPORT_SYMBOL_GPL(devm_mdiobus_free); + /** * mdiobus_release - mii_bus device release callback * @d: the target struct device that contains the mii_bus @@ -123,6 +187,50 @@ struct mii_bus *of_mdio_find_bus(struct device_node *mdio_bus_np) return d ? to_mii_bus(d) : NULL; } EXPORT_SYMBOL(of_mdio_find_bus); + +/* Walk the list of subnodes of a mdio bus and look for a node that matches the + * phy's address with its 'reg' property. If found, set the of_node pointer for + * the phy. This allows auto-probed pyh devices to be supplied with information + * passed in via DT. + */ +static void of_mdiobus_link_phydev(struct mii_bus *mdio, + struct phy_device *phydev) +{ + struct device *dev = &phydev->dev; + struct device_node *child; + + if (dev->of_node || !mdio->dev.of_node) + return; + + for_each_available_child_of_node(mdio->dev.of_node, child) { + int addr; + int ret; + + ret = of_property_read_u32(child, "reg", &addr); + if (ret < 0) { + dev_err(dev, "%s has invalid PHY address\n", + child->full_name); + continue; + } + + /* A PHY must have a reg property in the range [0-31] */ + if (addr >= PHY_MAX_ADDR) { + dev_err(dev, "%s PHY address %i is too large\n", + child->full_name, addr); + continue; + } + + if (addr == phydev->addr) { + dev->of_node = child; + return; + } + } +} +#else /* !IS_ENABLED(CONFIG_OF_MDIO) */ +static inline void of_mdiobus_link_phydev(struct mii_bus *mdio, + struct phy_device *phydev) +{ +} #endif /** @@ -139,8 +247,7 @@ int mdiobus_register(struct mii_bus *bus) int i, err; if (NULL == bus || NULL == bus->name || - NULL == bus->read || - NULL == bus->write) + NULL == bus->read || NULL == bus->write) return -EINVAL; BUG_ON(bus->state != MDIOBUS_ALLOCATED && @@ -148,12 +255,14 @@ int mdiobus_register(struct mii_bus *bus) bus->dev.parent = bus->parent; bus->dev.class = &mdio_bus_class; + bus->dev.driver = bus->parent->driver; bus->dev.groups = NULL; dev_set_name(&bus->dev, "%s", bus->id); err = device_register(&bus->dev); if (err) { pr_err("mii_bus %s failed to register\n", bus->id); + put_device(&bus->dev); return -EINVAL; } @@ -214,9 +323,7 @@ EXPORT_SYMBOL(mdiobus_unregister); */ void mdiobus_free(struct mii_bus *bus) { - /* - * For compatibility with error handling in drivers. - */ + /* For compatibility with error handling in drivers. */ if (bus->state == MDIOBUS_ALLOCATED) { kfree(bus); return; @@ -238,6 +345,12 @@ struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr) if (IS_ERR(phydev) || phydev == NULL) return phydev; + /* + * For DT, see if the auto-probed phy has a correspoding child + * in the bus node, and set the of_node pointer in this case. + */ + of_mdiobus_link_phydev(bus, phydev); + err = phy_device_register(phydev); if (err) { phy_device_free(phydev); @@ -316,8 +429,8 @@ static int mdio_bus_match(struct device *dev, struct device_driver *drv) if (phydrv->match_phy_device) return phydrv->match_phy_device(phydev); - return ((phydrv->phy_id & phydrv->phy_id_mask) == - (phydev->phy_id & phydrv->phy_id_mask)); + return (phydrv->phy_id & phydrv->phy_id_mask) == + (phydev->phy_id & phydrv->phy_id_mask); } #ifdef CONFIG_PM @@ -335,15 +448,13 @@ static bool mdio_bus_phy_may_suspend(struct phy_device *phydev) if (!netdev) return true; - /* - * Don't suspend PHY if the attched netdev parent may wakeup. + /* Don't suspend PHY if the attched netdev parent may wakeup. * The parent may point to a PCI device, as in tg3 driver. */ if (netdev->dev.parent && device_may_wakeup(netdev->dev.parent)) return false; - /* - * Also don't suspend PHY if the netdev itself may wakeup. This + /* Also don't suspend PHY if the netdev itself may wakeup. This * is the case for devices w/o underlaying pwr. mgmt. aware bus, * e.g. SoC devices. */ @@ -358,8 +469,7 @@ static int mdio_bus_suspend(struct device *dev) struct phy_driver *phydrv = to_phy_driver(dev->driver); struct phy_device *phydev = to_phy_device(dev); - /* - * We must stop the state machine manually, otherwise it stops out of + /* We must stop the state machine manually, otherwise it stops out of * control, possibly with the phydev->lock held. Upon resume, netdev * may call phy routines that try to grab the same lock, and that may * lead to a deadlock. @@ -388,7 +498,7 @@ static int mdio_bus_resume(struct device *dev) no_resume: if (phydev->attached_dev && phydev->adjust_link) - phy_start_machine(phydev, NULL); + phy_start_machine(phydev); return 0; } @@ -410,12 +520,12 @@ static int mdio_bus_restore(struct device *dev) phydev->link = 0; phydev->state = PHY_UP; - phy_start_machine(phydev, NULL); + phy_start_machine(phydev); return 0; } -static struct dev_pm_ops mdio_bus_pm_ops = { +static const struct dev_pm_ops mdio_bus_pm_ops = { .suspend = mdio_bus_suspend, .resume = mdio_bus_resume, .freeze = mdio_bus_suspend, @@ -438,17 +548,39 @@ phy_id_show(struct device *dev, struct device_attribute *attr, char *buf) return sprintf(buf, "0x%.8lx\n", (unsigned long)phydev->phy_id); } +static DEVICE_ATTR_RO(phy_id); + +static ssize_t +phy_interface_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct phy_device *phydev = to_phy_device(dev); + + return sprintf(buf, "%s\n", phy_modes(phydev->interface)); +} +static DEVICE_ATTR_RO(phy_interface); + +static ssize_t +phy_has_fixups_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct phy_device *phydev = to_phy_device(dev); + + return sprintf(buf, "%d\n", phydev->has_fixups); +} +static DEVICE_ATTR_RO(phy_has_fixups); -static struct device_attribute mdio_dev_attrs[] = { - __ATTR_RO(phy_id), - __ATTR_NULL +static struct attribute *mdio_dev_attrs[] = { + &dev_attr_phy_id.attr, + &dev_attr_phy_interface.attr, + &dev_attr_phy_has_fixups.attr, + NULL, }; +ATTRIBUTE_GROUPS(mdio_dev); struct bus_type mdio_bus_type = { .name = "mdio_bus", .match = mdio_bus_match, .pm = MDIO_BUS_PM_OPS, - .dev_attrs = mdio_dev_attrs, + .dev_groups = mdio_dev_groups, }; EXPORT_SYMBOL(mdio_bus_type); diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index c31aad0004c..bc7c7d2f75f 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -81,14 +81,14 @@ static int ksz_config_flags(struct phy_device *phydev) } static int kszphy_extended_write(struct phy_device *phydev, - u32 regnum, u16 val) + u32 regnum, u16 val) { phy_write(phydev, MII_KSZPHY_EXTREG, KSZPHY_EXTREG_WRITE | regnum); return phy_write(phydev, MII_KSZPHY_EXTREG_WRITE, val); } static int kszphy_extended_read(struct phy_device *phydev, - u32 regnum) + u32 regnum) { phy_write(phydev, MII_KSZPHY_EXTREG, regnum); return phy_read(phydev, MII_KSZPHY_EXTREG_READ); @@ -148,15 +148,52 @@ static int ks8737_config_intr(struct phy_device *phydev) return rc < 0 ? rc : 0; } +static int kszphy_setup_led(struct phy_device *phydev, + unsigned int reg, unsigned int shift) +{ + + struct device *dev = &phydev->dev; + struct device_node *of_node = dev->of_node; + int rc, temp; + u32 val; + + if (!of_node && dev->parent->of_node) + of_node = dev->parent->of_node; + + if (of_property_read_u32(of_node, "micrel,led-mode", &val)) + return 0; + + temp = phy_read(phydev, reg); + if (temp < 0) + return temp; + + temp &= ~(3 << shift); + temp |= val << shift; + rc = phy_write(phydev, reg, temp); + + return rc < 0 ? rc : 0; +} + static int kszphy_config_init(struct phy_device *phydev) { return 0; } +static int kszphy_config_init_led8041(struct phy_device *phydev) +{ + /* single led control, register 0x1e bits 15..14 */ + return kszphy_setup_led(phydev, 0x1e, 14); +} + static int ksz8021_config_init(struct phy_device *phydev) { - int rc; const u16 val = KSZPHY_OMSO_B_CAST_OFF | KSZPHY_OMSO_RMII_OVERRIDE; + int rc; + + rc = kszphy_setup_led(phydev, 0x1f, 4); + if (rc) + dev_err(&phydev->dev, "failed to set led mode\n"); + phy_write(phydev, MII_KSZPHY_OMSO, val); rc = ksz_config_flags(phydev); return rc < 0 ? rc : 0; @@ -166,6 +203,10 @@ static int ks8051_config_init(struct phy_device *phydev) { int rc; + rc = kszphy_setup_led(phydev, 0x1f, 4); + if (rc) + dev_err(&phydev->dev, "failed to set led mode\n"); + rc = ksz_config_flags(phydev); return rc < 0 ? rc : 0; } @@ -205,13 +246,13 @@ static int ksz9021_load_values_from_of(struct phy_device *phydev, if (val1 != -1) newval = ((newval & 0xfff0) | ((val1 / PS_TO_REG) & 0xf) << 0); - if (val2 != -1) + if (val2 != -2) newval = ((newval & 0xff0f) | ((val2 / PS_TO_REG) & 0xf) << 4); - if (val3 != -1) + if (val3 != -3) newval = ((newval & 0xf0ff) | ((val3 / PS_TO_REG) & 0xf) << 8); - if (val4 != -1) + if (val4 != -4) newval = ((newval & 0x0fff) | ((val4 / PS_TO_REG) & 0xf) << 12); return kszphy_extended_write(phydev, reg, newval); @@ -242,6 +283,110 @@ static int ksz9021_config_init(struct phy_device *phydev) return 0; } +#define MII_KSZ9031RN_MMD_CTRL_REG 0x0d +#define MII_KSZ9031RN_MMD_REGDATA_REG 0x0e +#define OP_DATA 1 +#define KSZ9031_PS_TO_REG 60 + +/* Extended registers */ +#define MII_KSZ9031RN_CONTROL_PAD_SKEW 4 +#define MII_KSZ9031RN_RX_DATA_PAD_SKEW 5 +#define MII_KSZ9031RN_TX_DATA_PAD_SKEW 6 +#define MII_KSZ9031RN_CLK_PAD_SKEW 8 + +static int ksz9031_extended_write(struct phy_device *phydev, + u8 mode, u32 dev_addr, u32 regnum, u16 val) +{ + phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, dev_addr); + phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, regnum); + phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, (mode << 14) | dev_addr); + return phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, val); +} + +static int ksz9031_extended_read(struct phy_device *phydev, + u8 mode, u32 dev_addr, u32 regnum) +{ + phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, dev_addr); + phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, regnum); + phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, (mode << 14) | dev_addr); + return phy_read(phydev, MII_KSZ9031RN_MMD_REGDATA_REG); +} + +static int ksz9031_of_load_skew_values(struct phy_device *phydev, + struct device_node *of_node, + u16 reg, size_t field_sz, + char *field[], u8 numfields) +{ + int val[4] = {-1, -2, -3, -4}; + int matches = 0; + u16 mask; + u16 maxval; + u16 newval; + int i; + + for (i = 0; i < numfields; i++) + if (!of_property_read_u32(of_node, field[i], val + i)) + matches++; + + if (!matches) + return 0; + + if (matches < numfields) + newval = ksz9031_extended_read(phydev, OP_DATA, 2, reg); + else + newval = 0; + + maxval = (field_sz == 4) ? 0xf : 0x1f; + for (i = 0; i < numfields; i++) + if (val[i] != -(i + 1)) { + mask = 0xffff; + mask ^= maxval << (field_sz * i); + newval = (newval & mask) | + (((val[i] / KSZ9031_PS_TO_REG) & maxval) + << (field_sz * i)); + } + + return ksz9031_extended_write(phydev, OP_DATA, 2, reg, newval); +} + +static int ksz9031_config_init(struct phy_device *phydev) +{ + struct device *dev = &phydev->dev; + struct device_node *of_node = dev->of_node; + char *clk_skews[2] = {"rxc-skew-ps", "txc-skew-ps"}; + char *rx_data_skews[4] = { + "rxd0-skew-ps", "rxd1-skew-ps", + "rxd2-skew-ps", "rxd3-skew-ps" + }; + char *tx_data_skews[4] = { + "txd0-skew-ps", "txd1-skew-ps", + "txd2-skew-ps", "txd3-skew-ps" + }; + char *control_skews[2] = {"txen-skew-ps", "rxdv-skew-ps"}; + + if (!of_node && dev->parent->of_node) + of_node = dev->parent->of_node; + + if (of_node) { + ksz9031_of_load_skew_values(phydev, of_node, + MII_KSZ9031RN_CLK_PAD_SKEW, 5, + clk_skews, 2); + + ksz9031_of_load_skew_values(phydev, of_node, + MII_KSZ9031RN_CONTROL_PAD_SKEW, 4, + control_skews, 2); + + ksz9031_of_load_skew_values(phydev, of_node, + MII_KSZ9031RN_RX_DATA_PAD_SKEW, 4, + rx_data_skews, 4); + + ksz9031_of_load_skew_values(phydev, of_node, + MII_KSZ9031RN_TX_DATA_PAD_SKEW, 4, + tx_data_skews, 4); + } + return 0; +} + #define KSZ8873MLL_GLOBAL_CONTROL_4 0x06 #define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX (1 << 6) #define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED (1 << 4) @@ -287,6 +432,8 @@ static struct phy_driver ksphy_driver[] = { .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, .config_intr = ks8737_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, .driver = { .owner = THIS_MODULE,}, }, { .phy_id = PHY_ID_KSZ8021, @@ -300,6 +447,8 @@ static struct phy_driver ksphy_driver[] = { .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, .config_intr = kszphy_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, .driver = { .owner = THIS_MODULE,}, }, { .phy_id = PHY_ID_KSZ8031, @@ -313,6 +462,8 @@ static struct phy_driver ksphy_driver[] = { .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, .config_intr = kszphy_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, .driver = { .owner = THIS_MODULE,}, }, { .phy_id = PHY_ID_KSZ8041, @@ -321,11 +472,28 @@ static struct phy_driver ksphy_driver[] = { .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, - .config_init = kszphy_config_init, + .config_init = kszphy_config_init_led8041, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, .config_intr = kszphy_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, + .driver = { .owner = THIS_MODULE,}, +}, { + .phy_id = PHY_ID_KSZ8041RNLI, + .phy_id_mask = 0x00fffff0, + .name = "Micrel KSZ8041RNLI", + .features = PHY_BASIC_FEATURES | + SUPPORTED_Pause | SUPPORTED_Asym_Pause, + .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .config_init = kszphy_config_init_led8041, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = kszphy_ack_interrupt, + .config_intr = kszphy_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, .driver = { .owner = THIS_MODULE,}, }, { .phy_id = PHY_ID_KSZ8051, @@ -339,6 +507,8 @@ static struct phy_driver ksphy_driver[] = { .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, .config_intr = kszphy_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, .driver = { .owner = THIS_MODULE,}, }, { .phy_id = PHY_ID_KSZ8001, @@ -346,11 +516,13 @@ static struct phy_driver ksphy_driver[] = { .phy_id_mask = 0x00ffffff, .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, - .config_init = kszphy_config_init, + .config_init = kszphy_config_init_led8041, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, .config_intr = kszphy_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, .driver = { .owner = THIS_MODULE,}, }, { .phy_id = PHY_ID_KSZ8081, @@ -363,6 +535,8 @@ static struct phy_driver ksphy_driver[] = { .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, .config_intr = kszphy_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, .driver = { .owner = THIS_MODULE,}, }, { .phy_id = PHY_ID_KSZ8061, @@ -375,6 +549,8 @@ static struct phy_driver ksphy_driver[] = { .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, .config_intr = kszphy_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, .driver = { .owner = THIS_MODULE,}, }, { .phy_id = PHY_ID_KSZ9021, @@ -387,6 +563,8 @@ static struct phy_driver ksphy_driver[] = { .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, .config_intr = ksz9021_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, .driver = { .owner = THIS_MODULE, }, }, { .phy_id = PHY_ID_KSZ9031, @@ -395,11 +573,13 @@ static struct phy_driver ksphy_driver[] = { .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, - .config_init = kszphy_config_init, + .config_init = ksz9031_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, .config_intr = ksz9021_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, .driver = { .owner = THIS_MODULE, }, }, { .phy_id = PHY_ID_KSZ8873MLL, @@ -410,6 +590,8 @@ static struct phy_driver ksphy_driver[] = { .config_init = kszphy_config_init, .config_aneg = ksz8873mll_config_aneg, .read_status = ksz8873mll_read_status, + .suspend = genphy_suspend, + .resume = genphy_resume, .driver = { .owner = THIS_MODULE, }, }, { .phy_id = PHY_ID_KSZ886X, @@ -420,6 +602,8 @@ static struct phy_driver ksphy_driver[] = { .config_init = kszphy_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, + .suspend = genphy_suspend, + .resume = genphy_resume, .driver = { .owner = THIS_MODULE, }, } }; diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 36c6994436b..f7c61812ea4 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -1,7 +1,4 @@ -/* - * drivers/net/phy/phy.c - * - * Framework for configuring and reading PHY devices +/* Framework for configuring and reading PHY devices * Based on code in sungem_phy.c and gianfar_phy.c * * Author: Andy Fleming @@ -23,7 +20,6 @@ #include <linux/errno.h> #include <linux/unistd.h> #include <linux/interrupt.h> -#include <linux/init.h> #include <linux/delay.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> @@ -36,11 +32,31 @@ #include <linux/timer.h> #include <linux/workqueue.h> #include <linux/mdio.h> - +#include <linux/io.h> +#include <linux/uaccess.h> #include <linux/atomic.h> -#include <asm/io.h> + #include <asm/irq.h> -#include <asm/uaccess.h> + +static const char *phy_speed_to_str(int speed) +{ + switch (speed) { + case SPEED_10: + return "10Mbps"; + case SPEED_100: + return "100Mbps"; + case SPEED_1000: + return "1Gbps"; + case SPEED_2500: + return "2.5Gbps"; + case SPEED_10000: + return "10Gbps"; + case SPEED_UNKNOWN: + return "Unknown"; + default: + return "Unsupported (update phy.c)"; + } +} /** * phy_print_status - Convenience function to print out the current phy status @@ -48,13 +64,15 @@ */ void phy_print_status(struct phy_device *phydev) { - if (phydev->link) - pr_info("%s - Link is Up - %d/%s\n", - dev_name(&phydev->dev), - phydev->speed, - DUPLEX_FULL == phydev->duplex ? "Full" : "Half"); - else - pr_info("%s - Link is Down\n", dev_name(&phydev->dev)); + if (phydev->link) { + netdev_info(phydev->attached_dev, + "Link is Up - %s/%s - flow control %s\n", + phy_speed_to_str(phydev->speed), + DUPLEX_FULL == phydev->duplex ? "Full" : "Half", + phydev->pause ? "rx/tx" : "off"); + } else { + netdev_info(phydev->attached_dev, "Link is Down\n"); + } } EXPORT_SYMBOL(phy_print_status); @@ -65,16 +83,14 @@ EXPORT_SYMBOL(phy_print_status); * If the @phydev driver has an ack_interrupt function, call it to * ack and clear the phy device's interrupt. * - * Returns 0 on success on < 0 on error. + * Returns 0 on success or < 0 on error. */ static int phy_clear_interrupt(struct phy_device *phydev) { - int err = 0; - if (phydev->drv->ack_interrupt) - err = phydev->drv->ack_interrupt(phydev); + return phydev->drv->ack_interrupt(phydev); - return err; + return 0; } /** @@ -82,17 +98,15 @@ static int phy_clear_interrupt(struct phy_device *phydev) * @phydev: the phy_device struct * @interrupts: interrupt flags to configure for this @phydev * - * Returns 0 on success on < 0 on error. + * Returns 0 on success or < 0 on error. */ static int phy_config_interrupt(struct phy_device *phydev, u32 interrupts) { - int err = 0; - phydev->interrupts = interrupts; if (phydev->drv->config_intr) - err = phydev->drv->config_intr(phydev); + return phydev->drv->config_intr(phydev); - return err; + return 0; } @@ -100,21 +114,21 @@ static int phy_config_interrupt(struct phy_device *phydev, u32 interrupts) * phy_aneg_done - return auto-negotiation status * @phydev: target phy_device struct * - * Description: Reads the status register and returns 0 either if - * auto-negotiation is incomplete, or if there was an error. - * Returns BMSR_ANEGCOMPLETE if auto-negotiation is done. + * Description: Return the auto-negotiation status from this @phydev + * Returns > 0 on success or < 0 on error. 0 means that auto-negotiation + * is still pending. */ static inline int phy_aneg_done(struct phy_device *phydev) { - int retval; + if (phydev->drv->aneg_done) + return phydev->drv->aneg_done(phydev); - retval = phy_read(phydev, MII_BMSR); - - return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE); + return genphy_aneg_done(phydev); } /* A structure for mapping a particular speed and duplex - * combination to a particular SUPPORTED and ADVERTISED value */ + * combination to a particular SUPPORTED and ADVERTISED value + */ struct phy_setting { int speed; int duplex; @@ -172,13 +186,12 @@ static const struct phy_setting settings[] = { * of that setting. Returns the index of the last setting if * none of the others match. */ -static inline int phy_find_setting(int speed, int duplex) +static inline unsigned int phy_find_setting(int speed, int duplex) { - int idx = 0; + unsigned int idx = 0; while (idx < ARRAY_SIZE(settings) && - (settings[idx].speed != speed || - settings[idx].duplex != duplex)) + (settings[idx].speed != speed || settings[idx].duplex != duplex)) idx++; return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1; @@ -194,7 +207,7 @@ static inline int phy_find_setting(int speed, int duplex) * the mask in features. Returns the index of the last setting * if nothing else matches. */ -static inline int phy_find_valid(int idx, u32 features) +static inline unsigned int phy_find_valid(unsigned int idx, u32 features) { while (idx < MAX_NUM_SETTINGS && !(settings[idx].setting & features)) idx++; @@ -213,7 +226,7 @@ static inline int phy_find_valid(int idx, u32 features) static void phy_sanitize_settings(struct phy_device *phydev) { u32 features = phydev->supported; - int idx; + unsigned int idx; /* Sanitize settings based on PHY capabilities */ if ((features & SUPPORTED_Autoneg) == 0) @@ -245,8 +258,7 @@ int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd) if (cmd->phy_address != phydev->addr) return -EINVAL; - /* We make sure that we don't pass unsupported - * values in to the PHY */ + /* We make sure that we don't pass unsupported values in to the PHY */ cmd->advertising &= phydev->supported; /* Verify the settings we care about. */ @@ -289,10 +301,14 @@ int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd) cmd->supported = phydev->supported; cmd->advertising = phydev->advertising; + cmd->lp_advertising = phydev->lp_advertising; ethtool_cmd_speed_set(cmd, phydev->speed); cmd->duplex = phydev->duplex; - cmd->port = PORT_MII; + if (phydev->interface == PHY_INTERFACE_MODE_MOCA) + cmd->port = PORT_BNC; + else + cmd->port = PORT_MII; cmd->phy_address = phydev->addr; cmd->transceiver = phy_is_internal(phydev) ? XCVR_INTERNAL : XCVR_EXTERNAL; @@ -312,8 +328,7 @@ EXPORT_SYMBOL(phy_ethtool_gset); * PHYCONTROL layer. It changes registers without regard to * current state. Use at own risk. */ -int phy_mii_ioctl(struct phy_device *phydev, - struct ifreq *ifr, int cmd) +int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd) { struct mii_ioctl_data *mii_data = if_mii(ifr); u16 val = mii_data->val_in; @@ -326,25 +341,24 @@ int phy_mii_ioctl(struct phy_device *phydev, case SIOCGMIIREG: mii_data->val_out = mdiobus_read(phydev->bus, mii_data->phy_id, mii_data->reg_num); - break; + return 0; case SIOCSMIIREG: if (mii_data->phy_id == phydev->addr) { - switch(mii_data->reg_num) { + switch (mii_data->reg_num) { case MII_BMCR: - if ((val & (BMCR_RESET|BMCR_ANENABLE)) == 0) + if ((val & (BMCR_RESET | BMCR_ANENABLE)) == 0) phydev->autoneg = AUTONEG_DISABLE; else phydev->autoneg = AUTONEG_ENABLE; - if ((!phydev->autoneg) && (val & BMCR_FULLDPLX)) + if (!phydev->autoneg && (val & BMCR_FULLDPLX)) phydev->duplex = DUPLEX_FULL; else phydev->duplex = DUPLEX_HALF; - if ((!phydev->autoneg) && - (val & BMCR_SPEED1000)) + if (!phydev->autoneg && (val & BMCR_SPEED1000)) phydev->speed = SPEED_1000; - else if ((!phydev->autoneg) && - (val & BMCR_SPEED100)) + else if (!phydev->autoneg && + (val & BMCR_SPEED100)) phydev->speed = SPEED_100; break; case MII_ADVERTISE: @@ -360,12 +374,9 @@ int phy_mii_ioctl(struct phy_device *phydev, mii_data->reg_num, val); if (mii_data->reg_num == MII_BMCR && - val & BMCR_RESET && - phydev->drv->config_init) { - phy_scan_fixups(phydev); - phydev->drv->config_init(phydev); - } - break; + val & BMCR_RESET) + return phy_init_hw(phydev); + return 0; case SIOCSHWTSTAMP: if (phydev->drv->hwtstamp) @@ -375,8 +386,6 @@ int phy_mii_ioctl(struct phy_device *phydev, default: return -EOPNOTSUPP; } - - return 0; } EXPORT_SYMBOL(phy_mii_ioctl); @@ -399,7 +408,6 @@ int phy_start_aneg(struct phy_device *phydev) phy_sanitize_settings(phydev); err = phydev->drv->config_aneg(phydev); - if (err < 0) goto out_unlock; @@ -419,25 +427,18 @@ out_unlock: } EXPORT_SYMBOL(phy_start_aneg); - /** * phy_start_machine - start PHY state machine tracking * @phydev: the phy_device struct - * @handler: callback function for state change notifications * * Description: The PHY infrastructure can run a state machine * which tracks whether the PHY is starting up, negotiating, * etc. This function starts the timer which tracks the state - * of the PHY. If you want to be notified when the state changes, - * pass in the callback @handler, otherwise, pass NULL. If you - * want to maintain your own state machine, do not call this - * function. + * of the PHY. If you want to maintain your own state machine, + * do not call this function. */ -void phy_start_machine(struct phy_device *phydev, - void (*handler)(struct net_device *)) +void phy_start_machine(struct phy_device *phydev) { - phydev->adjust_state = handler; - queue_delayed_work(system_power_efficient_wq, &phydev->state_queue, HZ); } @@ -457,8 +458,6 @@ void phy_stop_machine(struct phy_device *phydev) if (phydev->state > PHY_UP) phydev->state = PHY_UP; mutex_unlock(&phydev->lock); - - phydev->adjust_state = NULL; } /** @@ -495,7 +494,8 @@ static irqreturn_t phy_interrupt(int irq, void *phy_dat) /* The MDIO bus is not allowed to be written in interrupt * context, so we need to disable the irq here. A work * queue will write the PHY to disable and clear the - * interrupt, and then reenable the irq line. */ + * interrupt, and then reenable the irq line. + */ disable_irq_nosync(irq); atomic_inc(&phydev->irq_disable); @@ -510,16 +510,12 @@ static irqreturn_t phy_interrupt(int irq, void *phy_dat) */ static int phy_enable_interrupts(struct phy_device *phydev) { - int err; - - err = phy_clear_interrupt(phydev); + int err = phy_clear_interrupt(phydev); if (err < 0) return err; - err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED); - - return err; + return phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED); } /** @@ -532,13 +528,11 @@ static int phy_disable_interrupts(struct phy_device *phydev) /* Disable PHY interrupts */ err = phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED); - if (err) goto phy_err; /* Clear the interrupt */ err = phy_clear_interrupt(phydev); - if (err) goto phy_err; @@ -562,22 +556,16 @@ phy_err: */ int phy_start_interrupts(struct phy_device *phydev) { - int err = 0; - atomic_set(&phydev->irq_disable, 0); - if (request_irq(phydev->irq, phy_interrupt, - IRQF_SHARED, - "phy_interrupt", - phydev) < 0) { + if (request_irq(phydev->irq, phy_interrupt, 0, "phy_interrupt", + phydev) < 0) { pr_warn("%s: Can't get IRQ %d (PHY)\n", phydev->bus->name, phydev->irq); phydev->irq = PHY_POLL; return 0; } - err = phy_enable_interrupts(phydev); - - return err; + return phy_enable_interrupts(phydev); } EXPORT_SYMBOL(phy_start_interrupts); @@ -587,24 +575,20 @@ EXPORT_SYMBOL(phy_start_interrupts); */ int phy_stop_interrupts(struct phy_device *phydev) { - int err; - - err = phy_disable_interrupts(phydev); + int err = phy_disable_interrupts(phydev); if (err) phy_error(phydev); free_irq(phydev->irq, phydev); - /* - * Cannot call flush_scheduled_work() here as desired because + /* Cannot call flush_scheduled_work() here as desired because * of rtnl_lock(), but we do not really care about what would * be done, except from enable_irq(), so cancel any work * possibly pending and take care of the matter below. */ cancel_work_sync(&phydev->phy_queue); - /* - * If work indeed has been cancelled, disable_irq() will have + /* If work indeed has been cancelled, disable_irq() will have * been left unbalanced from phy_interrupt() and enable_irq() * has to be called so that other devices on the line work. */ @@ -615,14 +599,12 @@ int phy_stop_interrupts(struct phy_device *phydev) } EXPORT_SYMBOL(phy_stop_interrupts); - /** * phy_change - Scheduled by the phy_interrupt/timer to handle PHY changes * @work: work_struct that describes the work to be done */ void phy_change(struct work_struct *work) { - int err; struct phy_device *phydev = container_of(work, struct phy_device, phy_queue); @@ -630,9 +612,7 @@ void phy_change(struct work_struct *work) !phydev->drv->did_interrupt(phydev)) goto ignore; - err = phy_disable_interrupts(phydev); - - if (err) + if (phy_disable_interrupts(phydev)) goto phy_err; mutex_lock(&phydev->lock); @@ -644,16 +624,13 @@ void phy_change(struct work_struct *work) enable_irq(phydev->irq); /* Reenable interrupts */ - if (PHY_HALTED != phydev->state) - err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED); - - if (err) + if (PHY_HALTED != phydev->state && + phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED)) goto irq_enable_err; /* reschedule state queue work to run as soon as possible */ cancel_delayed_work_sync(&phydev->state_queue); queue_delayed_work(system_power_efficient_wq, &phydev->state_queue, 0); - return; ignore: @@ -692,13 +669,12 @@ void phy_stop(struct phy_device *phydev) out_unlock: mutex_unlock(&phydev->lock); - /* - * Cannot call flush_scheduled_work() here as desired because + /* Cannot call flush_scheduled_work() here as desired because * of rtnl_lock(), but PHY_HALTED shall guarantee phy_change() * will not reenable interrupts. */ } - +EXPORT_SYMBOL(phy_stop); /** * phy_start - start or restart a PHY device @@ -715,20 +691,19 @@ void phy_start(struct phy_device *phydev) mutex_lock(&phydev->lock); switch (phydev->state) { - case PHY_STARTING: - phydev->state = PHY_PENDING; - break; - case PHY_READY: - phydev->state = PHY_UP; - break; - case PHY_HALTED: - phydev->state = PHY_RESUMING; - default: - break; + case PHY_STARTING: + phydev->state = PHY_PENDING; + break; + case PHY_READY: + phydev->state = PHY_UP; + break; + case PHY_HALTED: + phydev->state = PHY_RESUMING; + default: + break; } mutex_unlock(&phydev->lock); } -EXPORT_SYMBOL(phy_stop); EXPORT_SYMBOL(phy_start); /** @@ -740,160 +715,142 @@ void phy_state_machine(struct work_struct *work) struct delayed_work *dwork = to_delayed_work(work); struct phy_device *phydev = container_of(dwork, struct phy_device, state_queue); - int needs_aneg = 0; + bool needs_aneg = false, do_suspend = false, do_resume = false; int err = 0; mutex_lock(&phydev->lock); - if (phydev->adjust_state) - phydev->adjust_state(phydev->attached_dev); + if (phydev->drv->link_change_notify) + phydev->drv->link_change_notify(phydev); - switch(phydev->state) { - case PHY_DOWN: - case PHY_STARTING: - case PHY_READY: - case PHY_PENDING: - break; - case PHY_UP: - needs_aneg = 1; + switch (phydev->state) { + case PHY_DOWN: + case PHY_STARTING: + case PHY_READY: + case PHY_PENDING: + break; + case PHY_UP: + needs_aneg = true; - phydev->link_timeout = PHY_AN_TIMEOUT; + phydev->link_timeout = PHY_AN_TIMEOUT; + break; + case PHY_AN: + err = phy_read_status(phydev); + if (err < 0) break; - case PHY_AN: - err = phy_read_status(phydev); - if (err < 0) - break; - - /* If the link is down, give up on - * negotiation for now */ - if (!phydev->link) { - phydev->state = PHY_NOLINK; - netif_carrier_off(phydev->attached_dev); - phydev->adjust_link(phydev->attached_dev); - break; - } - - /* Check if negotiation is done. Break - * if there's an error */ - err = phy_aneg_done(phydev); - if (err < 0) - break; - - /* If AN is done, we're running */ - if (err > 0) { - phydev->state = PHY_RUNNING; - netif_carrier_on(phydev->attached_dev); - phydev->adjust_link(phydev->attached_dev); + /* If the link is down, give up on negotiation for now */ + if (!phydev->link) { + phydev->state = PHY_NOLINK; + netif_carrier_off(phydev->attached_dev); + phydev->adjust_link(phydev->attached_dev); + break; + } - } else if (0 == phydev->link_timeout--) { - needs_aneg = 1; - /* If we have the magic_aneg bit, - * we try again */ - if (phydev->drv->flags & PHY_HAS_MAGICANEG) - break; - } + /* Check if negotiation is done. Break if there's an error */ + err = phy_aneg_done(phydev); + if (err < 0) break; - case PHY_NOLINK: - err = phy_read_status(phydev); - if (err) - break; + /* If AN is done, we're running */ + if (err > 0) { + phydev->state = PHY_RUNNING; + netif_carrier_on(phydev->attached_dev); + phydev->adjust_link(phydev->attached_dev); - if (phydev->link) { - phydev->state = PHY_RUNNING; - netif_carrier_on(phydev->attached_dev); - phydev->adjust_link(phydev->attached_dev); - } + } else if (0 == phydev->link_timeout--) + needs_aneg = true; + break; + case PHY_NOLINK: + err = phy_read_status(phydev); + if (err) break; - case PHY_FORCING: - err = genphy_update_link(phydev); - if (err) - break; + if (phydev->link) { + if (AUTONEG_ENABLE == phydev->autoneg) { + err = phy_aneg_done(phydev); + if (err < 0) + break; - if (phydev->link) { - phydev->state = PHY_RUNNING; - netif_carrier_on(phydev->attached_dev); - } else { - if (0 == phydev->link_timeout--) - needs_aneg = 1; + if (!err) { + phydev->state = PHY_AN; + phydev->link_timeout = PHY_AN_TIMEOUT; + break; + } } - + phydev->state = PHY_RUNNING; + netif_carrier_on(phydev->attached_dev); phydev->adjust_link(phydev->attached_dev); + } + break; + case PHY_FORCING: + err = genphy_update_link(phydev); + if (err) break; - case PHY_RUNNING: - /* Only register a CHANGE if we are - * polling or ignoring interrupts - */ - if (!phy_interrupt_is_valid(phydev)) - phydev->state = PHY_CHANGELINK; - break; - case PHY_CHANGELINK: - err = phy_read_status(phydev); - - if (err) - break; - - if (phydev->link) { - phydev->state = PHY_RUNNING; - netif_carrier_on(phydev->attached_dev); - } else { - phydev->state = PHY_NOLINK; - netif_carrier_off(phydev->attached_dev); - } - phydev->adjust_link(phydev->attached_dev); + if (phydev->link) { + phydev->state = PHY_RUNNING; + netif_carrier_on(phydev->attached_dev); + } else { + if (0 == phydev->link_timeout--) + needs_aneg = true; + } - if (phy_interrupt_is_valid(phydev)) - err = phy_config_interrupt(phydev, - PHY_INTERRUPT_ENABLED); - break; - case PHY_HALTED: - if (phydev->link) { - phydev->link = 0; - netif_carrier_off(phydev->attached_dev); - phydev->adjust_link(phydev->attached_dev); - } + phydev->adjust_link(phydev->attached_dev); + break; + case PHY_RUNNING: + /* Only register a CHANGE if we are + * polling or ignoring interrupts + */ + if (!phy_interrupt_is_valid(phydev)) + phydev->state = PHY_CHANGELINK; + break; + case PHY_CHANGELINK: + err = phy_read_status(phydev); + if (err) break; - case PHY_RESUMING: - err = phy_clear_interrupt(phydev); + if (phydev->link) { + phydev->state = PHY_RUNNING; + netif_carrier_on(phydev->attached_dev); + } else { + phydev->state = PHY_NOLINK; + netif_carrier_off(phydev->attached_dev); + } - if (err) - break; + phydev->adjust_link(phydev->attached_dev); + if (phy_interrupt_is_valid(phydev)) err = phy_config_interrupt(phydev, - PHY_INTERRUPT_ENABLED); + PHY_INTERRUPT_ENABLED); + break; + case PHY_HALTED: + if (phydev->link) { + phydev->link = 0; + netif_carrier_off(phydev->attached_dev); + phydev->adjust_link(phydev->attached_dev); + do_suspend = true; + } + break; + case PHY_RESUMING: + err = phy_clear_interrupt(phydev); + if (err) + break; - if (err) - break; + err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED); + if (err) + break; - if (AUTONEG_ENABLE == phydev->autoneg) { - err = phy_aneg_done(phydev); - if (err < 0) - break; + if (AUTONEG_ENABLE == phydev->autoneg) { + err = phy_aneg_done(phydev); + if (err < 0) + break; - /* err > 0 if AN is done. - * Otherwise, it's 0, and we're - * still waiting for AN */ - if (err > 0) { - err = phy_read_status(phydev); - if (err) - break; - - if (phydev->link) { - phydev->state = PHY_RUNNING; - netif_carrier_on(phydev->attached_dev); - } else - phydev->state = PHY_NOLINK; - phydev->adjust_link(phydev->attached_dev); - } else { - phydev->state = PHY_AN; - phydev->link_timeout = PHY_AN_TIMEOUT; - } - } else { + /* err > 0 if AN is done. + * Otherwise, it's 0, and we're still waiting for AN + */ + if (err > 0) { err = phy_read_status(phydev); if (err) break; @@ -901,23 +858,45 @@ void phy_state_machine(struct work_struct *work) if (phydev->link) { phydev->state = PHY_RUNNING; netif_carrier_on(phydev->attached_dev); - } else + } else { phydev->state = PHY_NOLINK; + } phydev->adjust_link(phydev->attached_dev); + } else { + phydev->state = PHY_AN; + phydev->link_timeout = PHY_AN_TIMEOUT; } - break; + } else { + err = phy_read_status(phydev); + if (err) + break; + + if (phydev->link) { + phydev->state = PHY_RUNNING; + netif_carrier_on(phydev->attached_dev); + } else { + phydev->state = PHY_NOLINK; + } + phydev->adjust_link(phydev->attached_dev); + } + do_resume = true; + break; } mutex_unlock(&phydev->lock); if (needs_aneg) err = phy_start_aneg(phydev); + else if (do_suspend) + phy_suspend(phydev); + else if (do_resume) + phy_resume(phydev); if (err < 0) phy_error(phydev); queue_delayed_work(system_power_efficient_wq, &phydev->state_queue, - PHY_STATE_TIME * HZ); + PHY_STATE_TIME * HZ); } void phy_mac_interrupt(struct phy_device *phydev, int new_link) @@ -959,14 +938,10 @@ static inline void mmd_phy_indirect(struct mii_bus *bus, int prtad, int devad, static int phy_read_mmd_indirect(struct mii_bus *bus, int prtad, int devad, int addr) { - u32 ret; - mmd_phy_indirect(bus, prtad, devad, addr); /* Read the content of the MMD's selected register */ - ret = bus->read(bus, addr, MII_MMD_DATA); - - return ret; + return bus->read(bus, addr, MII_MMD_DATA); } /** @@ -1006,8 +981,6 @@ static void phy_write_mmd_indirect(struct mii_bus *bus, int prtad, int devad, */ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable) { - int ret = -EPROTONOSUPPORT; - /* According to 802.3az,the EEE is supported only in full duplex-mode. * Also EEE feature is active when core is operating with MII, GMII * or RGMII. @@ -1018,7 +991,8 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable) (phydev->interface == PHY_INTERFACE_MODE_RGMII))) { int eee_lp, eee_cap, eee_adv; u32 lp, cap, adv; - int idx, status; + int status; + unsigned int idx; /* Read phy status to properly get the right settings */ status = phy_read_status(phydev); @@ -1033,7 +1007,7 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable) cap = mmd_eee_cap_to_ethtool_sup_t(eee_cap); if (!cap) - goto eee_exit; + return -EPROTONOSUPPORT; /* Check which link settings negotiated and verify it in * the EEE advertising registers. @@ -1052,7 +1026,7 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable) lp = mmd_eee_adv_to_ethtool_adv_t(eee_lp); idx = phy_find_setting(phydev->speed, phydev->duplex); if (!(lp & adv & settings[idx].setting)) - goto eee_exit; + return -EPROTONOSUPPORT; if (clk_stop_enable) { /* Configure the PHY to stop receiving xMII @@ -1069,11 +1043,10 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable) MDIO_MMD_PCS, phydev->addr, val); } - ret = 0; /* EEE supported */ + return 0; /* EEE supported */ } -eee_exit: - return ret; + return -EPROTONOSUPPORT; } EXPORT_SYMBOL(phy_init_eee); @@ -1088,7 +1061,6 @@ int phy_get_eee_err(struct phy_device *phydev) { return phy_read_mmd_indirect(phydev->bus, MDIO_PCS_EEE_WK_ERR, MDIO_MMD_PCS, phydev->addr); - } EXPORT_SYMBOL(phy_get_eee_err); @@ -1138,9 +1110,8 @@ EXPORT_SYMBOL(phy_ethtool_get_eee); */ int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data) { - int val; + int val = ethtool_adv_to_mmd_eee_adv_t(data->advertised); - val = ethtool_adv_to_mmd_eee_adv_t(data->advertised); phy_write_mmd_indirect(phydev->bus, MDIO_AN_EEE_ADV, MDIO_MMD_AN, phydev->addr, val); diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 74630e94fa3..22c57be4dfa 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1,7 +1,4 @@ -/* - * drivers/net/phy/phy_device.c - * - * Framework for finding and configuring PHYs. +/* Framework for finding and configuring PHYs. * Also contains generic PHY driver * * Author: Andy Fleming @@ -33,10 +30,12 @@ #include <linux/mii.h> #include <linux/ethtool.h> #include <linux/phy.h> +#include <linux/mdio.h> +#include <linux/io.h> +#include <linux/uaccess.h> +#include <linux/of.h> -#include <asm/io.h> #include <asm/irq.h> -#include <asm/uaccess.h> MODULE_DESCRIPTION("PHY library"); MODULE_AUTHOR("Andy Fleming"); @@ -53,31 +52,31 @@ static void phy_device_release(struct device *dev) kfree(to_phy_device(dev)); } -static struct phy_driver genphy_driver; -extern int mdio_bus_init(void); -extern void mdio_bus_exit(void); +enum genphy_driver { + GENPHY_DRV_1G, + GENPHY_DRV_10G, + GENPHY_DRV_MAX +}; + +static struct phy_driver genphy_driver[GENPHY_DRV_MAX]; static LIST_HEAD(phy_fixup_list); static DEFINE_MUTEX(phy_fixup_lock); -static int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, - u32 flags, phy_interface_t interface); - -/* - * Creates a new phy_fixup and adds it to the list +/** + * phy_register_fixup - creates a new phy_fixup and adds it to the list * @bus_id: A string which matches phydev->dev.bus_id (or PHY_ANY_ID) * @phy_uid: Used to match against phydev->phy_id (the UID of the PHY) - * It can also be PHY_ANY_UID + * It can also be PHY_ANY_UID * @phy_uid_mask: Applied to phydev->phy_id and fixup->phy_uid before - * comparison + * comparison * @run: The actual code to be run when a matching PHY is found */ int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask, - int (*run)(struct phy_device *)) + int (*run)(struct phy_device *)) { - struct phy_fixup *fixup; + struct phy_fixup *fixup = kzalloc(sizeof(*fixup), GFP_KERNEL); - fixup = kzalloc(sizeof(struct phy_fixup), GFP_KERNEL); if (!fixup) return -ENOMEM; @@ -96,7 +95,7 @@ EXPORT_SYMBOL(phy_register_fixup); /* Registers a fixup to be run on any PHY with the UID in phy_uid */ int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask, - int (*run)(struct phy_device *)) + int (*run)(struct phy_device *)) { return phy_register_fixup(PHY_ANY_ID, phy_uid, phy_uid_mask, run); } @@ -104,14 +103,13 @@ EXPORT_SYMBOL(phy_register_fixup_for_uid); /* Registers a fixup to be run on the PHY with id string bus_id */ int phy_register_fixup_for_id(const char *bus_id, - int (*run)(struct phy_device *)) + int (*run)(struct phy_device *)) { return phy_register_fixup(bus_id, PHY_ANY_UID, 0xffffffff, run); } EXPORT_SYMBOL(phy_register_fixup_for_id); -/* - * Returns 1 if fixup matches phydev in bus_id and phy_uid. +/* Returns 1 if fixup matches phydev in bus_id and phy_uid. * Fixups can be set to match any in one or more fields. */ static int phy_needs_fixup(struct phy_device *phydev, struct phy_fixup *fixup) @@ -121,7 +119,7 @@ static int phy_needs_fixup(struct phy_device *phydev, struct phy_fixup *fixup) return 0; if ((fixup->phy_uid & fixup->phy_uid_mask) != - (phydev->phy_id & fixup->phy_uid_mask)) + (phydev->phy_id & fixup->phy_uid_mask)) if (fixup->phy_uid != PHY_ANY_UID) return 0; @@ -129,46 +127,44 @@ static int phy_needs_fixup(struct phy_device *phydev, struct phy_fixup *fixup) } /* Runs any matching fixups for this phydev */ -int phy_scan_fixups(struct phy_device *phydev) +static int phy_scan_fixups(struct phy_device *phydev) { struct phy_fixup *fixup; mutex_lock(&phy_fixup_lock); list_for_each_entry(fixup, &phy_fixup_list, list) { if (phy_needs_fixup(phydev, fixup)) { - int err; - - err = fixup->run(phydev); + int err = fixup->run(phydev); if (err < 0) { mutex_unlock(&phy_fixup_lock); return err; } + phydev->has_fixups = true; } } mutex_unlock(&phy_fixup_lock); return 0; } -EXPORT_SYMBOL(phy_scan_fixups); struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id, - bool is_c45, struct phy_c45_device_ids *c45_ids) + bool is_c45, + struct phy_c45_device_ids *c45_ids) { struct phy_device *dev; - /* We allocate the device, and initialize the - * default values */ + /* We allocate the device, and initialize the default values */ dev = kzalloc(sizeof(*dev), GFP_KERNEL); - if (NULL == dev) - return (struct phy_device*) PTR_ERR((void*)-ENOMEM); + return (struct phy_device *)PTR_ERR((void *)-ENOMEM); dev->dev.release = phy_device_release; dev->speed = 0; dev->duplex = -1; - dev->pause = dev->asym_pause = 0; + dev->pause = 0; + dev->asym_pause = 0; dev->link = 1; dev->interface = PHY_INTERFACE_MODE_GMII; @@ -192,14 +188,15 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id, INIT_WORK(&dev->phy_queue, phy_change); /* Request the appropriate module unconditionally; don't - bother trying to do so only if it isn't already loaded, - because that gets complicated. A hotplug event would have - done an unconditional modprobe anyway. - We don't do normal hotplug because it won't work for MDIO - -- because it relies on the device staying around for long - enough for the driver to get loaded. With MDIO, the NIC - driver will get bored and give up as soon as it finds that - there's no driver _already_ loaded. */ + * bother trying to do so only if it isn't already loaded, + * because that gets complicated. A hotplug event would have + * done an unconditional modprobe anyway. + * We don't do normal hotplug because it won't work for MDIO + * -- because it relies on the device staying around for long + * enough for the driver to get loaded. With MDIO, the NIC + * driver will get bored and give up as soon as it finds that + * there's no driver _already_ loaded. + */ request_module(MDIO_MODULE_PREFIX MDIO_ID_FMT, MDIO_ID_ARGS(phy_id)); device_initialize(&dev->dev); @@ -299,10 +296,8 @@ static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id, if (is_c45) return get_phy_c45_ids(bus, addr, phy_id, c45_ids); - /* Grab the bits from PHYIR1, and put them - * in the upper half */ + /* Grab the bits from PHYIR1, and put them in the upper half */ phy_reg = mdiobus_read(bus, addr, MII_PHYSID1); - if (phy_reg < 0) return -EIO; @@ -310,7 +305,6 @@ static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id, /* Grab the bits from PHYIR2, and put them in the lower half */ phy_reg = mdiobus_read(bus, addr, MII_PHYSID2); - if (phy_reg < 0) return -EIO; @@ -320,7 +314,8 @@ static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id, } /** - * get_phy_device - reads the specified PHY device and returns its @phy_device struct + * get_phy_device - reads the specified PHY device and returns its @phy_device + * struct * @bus: the target MII bus * @addr: PHY address on the MII bus * @is_c45: If true the PHY uses the 802.3 clause 45 protocol @@ -331,7 +326,6 @@ static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id, struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45) { struct phy_c45_device_ids c45_ids = {0}; - struct phy_device *dev = NULL; u32 phy_id = 0; int r; @@ -343,9 +337,7 @@ struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45) if ((phy_id & 0x1fffffff) == 0x1fffffff) return NULL; - dev = phy_device_create(bus, addr, phy_id, is_c45, &c45_ids); - - return dev; + return phy_device_create(bus, addr, phy_id, is_c45, &c45_ids); } EXPORT_SYMBOL(get_phy_device); @@ -357,14 +349,17 @@ int phy_device_register(struct phy_device *phydev) { int err; - /* Don't register a phy if one is already registered at this - * address */ + /* Don't register a phy if one is already registered at this address */ if (phydev->bus->phy_map[phydev->addr]) return -EINVAL; phydev->bus->phy_map[phydev->addr] = phydev; /* Run all of the fixups for this PHY */ - phy_scan_fixups(phydev); + err = phy_scan_fixups(phydev); + if (err) { + pr_err("PHY %d failed to initialize\n", phydev->addr); + goto out; + } err = device_add(&phydev->dev); if (err) { @@ -409,7 +404,7 @@ EXPORT_SYMBOL(phy_find_first); * this function. */ static void phy_prepare_link(struct phy_device *phydev, - void (*handler)(struct net_device *)) + void (*handler)(struct net_device *)) { phydev->adjust_link = handler; } @@ -432,7 +427,7 @@ int phy_connect_direct(struct net_device *dev, struct phy_device *phydev, return rc; phy_prepare_link(phydev, handler); - phy_start_machine(phydev, NULL); + phy_start_machine(phydev); if (phydev->irq > 0) phy_start_interrupts(phydev); @@ -455,16 +450,17 @@ EXPORT_SYMBOL(phy_connect_direct); * choose to call only the subset of functions which provide * the desired functionality. */ -struct phy_device * phy_connect(struct net_device *dev, const char *bus_id, - void (*handler)(struct net_device *), - phy_interface_t interface) +struct phy_device *phy_connect(struct net_device *dev, const char *bus_id, + void (*handler)(struct net_device *), + phy_interface_t interface) { struct phy_device *phydev; struct device *d; int rc; /* Search the list of PHY devices on the mdio bus for the - * PHY with the requested name */ + * PHY with the requested name + */ d = bus_find_device_by_name(&mdio_bus_type, NULL, bus_id); if (!d) { pr_err("PHY %s not found\n", bus_id); @@ -481,7 +477,8 @@ struct phy_device * phy_connect(struct net_device *dev, const char *bus_id, EXPORT_SYMBOL(phy_connect); /** - * phy_disconnect - disable interrupts, stop state machine, and detach a PHY device + * phy_disconnect - disable interrupts, stop state machine, and detach a PHY + * device * @phydev: target phy_device struct */ void phy_disconnect(struct phy_device *phydev) @@ -490,26 +487,75 @@ void phy_disconnect(struct phy_device *phydev) phy_stop_interrupts(phydev); phy_stop_machine(phydev); - + phydev->adjust_link = NULL; phy_detach(phydev); } EXPORT_SYMBOL(phy_disconnect); -int phy_init_hw(struct phy_device *phydev) +/** + * phy_poll_reset - Safely wait until a PHY reset has properly completed + * @phydev: The PHY device to poll + * + * Description: According to IEEE 802.3, Section 2, Subsection 22.2.4.1.1, as + * published in 2008, a PHY reset may take up to 0.5 seconds. The MII BMCR + * register must be polled until the BMCR_RESET bit clears. + * + * Furthermore, any attempts to write to PHY registers may have no effect + * or even generate MDIO bus errors until this is complete. + * + * Some PHYs (such as the Marvell 88E1111) don't entirely conform to the + * standard and do not fully reset after the BMCR_RESET bit is set, and may + * even *REQUIRE* a soft-reset to properly restart autonegotiation. In an + * effort to support such broken PHYs, this function is separate from the + * standard phy_init_hw() which will zero all the other bits in the BMCR + * and reapply all driver-specific and board-specific fixups. + */ +static int phy_poll_reset(struct phy_device *phydev) { + /* Poll until the reset bit clears (50ms per retry == 0.6 sec) */ + unsigned int retries = 12; int ret; + do { + msleep(50); + ret = phy_read(phydev, MII_BMCR); + if (ret < 0) + return ret; + } while (ret & BMCR_RESET && --retries); + if (ret & BMCR_RESET) + return -ETIMEDOUT; + + /* Some chips (smsc911x) may still need up to another 1ms after the + * BMCR_RESET bit is cleared before they are usable. + */ + msleep(1); + return 0; +} + +int phy_init_hw(struct phy_device *phydev) +{ + int ret = 0; + if (!phydev->drv || !phydev->drv->config_init) return 0; + if (phydev->drv->soft_reset) + ret = phydev->drv->soft_reset(phydev); + else + ret = genphy_soft_reset(phydev); + + if (ret < 0) + return ret; + ret = phy_scan_fixups(phydev); if (ret < 0) return ret; return phydev->drv->config_init(phydev); } +EXPORT_SYMBOL(phy_init_hw); /** * phy_attach_direct - attach a network device to a given PHY device pointer @@ -520,26 +566,26 @@ int phy_init_hw(struct phy_device *phydev) * * Description: Called by drivers to attach to a particular PHY * device. The phy_device is found, and properly hooked up - * to the phy_driver. If no driver is attached, then the - * genphy_driver is used. The phy_device is given a ptr to + * to the phy_driver. If no driver is attached, then a + * generic driver is used. The phy_device is given a ptr to * the attaching device, and given a callback for link status * change. The phy_device is returned to the attaching driver. */ -static int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, - u32 flags, phy_interface_t interface) +int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, + u32 flags, phy_interface_t interface) { struct device *d = &phydev->dev; + struct module *bus_module; int err; /* Assume that if there is no driver, that it doesn't - * exist, and we should use the genphy driver. */ + * exist, and we should use the genphy driver. + */ if (NULL == d->driver) { - if (phydev->is_c45) { - pr_err("No driver for phy %x\n", phydev->phy_id); - return -ENODEV; - } - - d->driver = &genphy_driver.driver; + if (phydev->is_c45) + d->driver = &genphy_driver[GENPHY_DRV_10G].driver; + else + d->driver = &genphy_driver[GENPHY_DRV_1G].driver; err = d->driver->probe(d); if (err >= 0) @@ -554,6 +600,14 @@ static int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, return -EBUSY; } + /* Increment the bus module reference count */ + bus_module = phydev->bus->dev.driver ? + phydev->bus->dev.driver->owner : NULL; + if (!try_module_get(bus_module)) { + dev_err(&dev->dev, "failed to get the bus module\n"); + return -EIO; + } + phydev->attached_dev = dev; dev->phydev = phydev; @@ -565,13 +619,17 @@ static int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, /* Do initial configuration here, now that * we have certain key parameters - * (dev_flags and interface) */ + * (dev_flags and interface) + */ err = phy_init_hw(phydev); if (err) phy_detach(phydev); + else + phy_resume(phydev); return err; } +EXPORT_SYMBOL(phy_attach_direct); /** * phy_attach - attach a network device to a particular PHY device @@ -582,8 +640,8 @@ static int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, * Description: Same as phy_attach_direct() except that a PHY bus_id * string is passed instead of a pointer to a struct phy_device. */ -struct phy_device *phy_attach(struct net_device *dev, - const char *bus_id, phy_interface_t interface) +struct phy_device *phy_attach(struct net_device *dev, const char *bus_id, + phy_interface_t interface) { struct bus_type *bus = &mdio_bus_type; struct phy_device *phydev; @@ -591,7 +649,8 @@ struct phy_device *phy_attach(struct net_device *dev, int rc; /* Search the list of PHY devices on the mdio bus for the - * PHY with the requested name */ + * PHY with the requested name + */ d = bus_find_device_by_name(bus, NULL, bus_id); if (!d) { pr_err("PHY %s not found\n", bus_id); @@ -613,18 +672,52 @@ EXPORT_SYMBOL(phy_attach); */ void phy_detach(struct phy_device *phydev) { + int i; + + if (phydev->bus->dev.driver) + module_put(phydev->bus->dev.driver->owner); + phydev->attached_dev->phydev = NULL; phydev->attached_dev = NULL; + phy_suspend(phydev); /* If the device had no specific driver before (i.e. - it * was using the generic driver), we unbind the device * from the generic driver so that there's a chance a - * real driver could be loaded */ - if (phydev->dev.driver == &genphy_driver.driver) - device_release_driver(&phydev->dev); + * real driver could be loaded + */ + for (i = 0; i < ARRAY_SIZE(genphy_driver); i++) { + if (phydev->dev.driver == &genphy_driver[i].driver) { + device_release_driver(&phydev->dev); + break; + } + } } EXPORT_SYMBOL(phy_detach); +int phy_suspend(struct phy_device *phydev) +{ + struct phy_driver *phydrv = to_phy_driver(phydev->dev.driver); + struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL }; + + /* If the device has WOL enabled, we cannot suspend the PHY */ + phy_ethtool_get_wol(phydev, &wol); + if (wol.wolopts) + return -EBUSY; + + if (phydrv->suspend) + return phydrv->suspend(phydev); + return 0; +} + +int phy_resume(struct phy_device *phydev) +{ + struct phy_driver *phydrv = to_phy_driver(phydev->dev.driver); + + if (phydrv->resume) + return phydrv->resume(phydev); + return 0; +} /* Generic PHY support and helper functions */ @@ -640,20 +733,19 @@ EXPORT_SYMBOL(phy_detach); static int genphy_config_advert(struct phy_device *phydev) { u32 advertise; - int oldadv, adv; + int oldadv, adv, bmsr; int err, changed = 0; - /* Only allow advertising what - * this PHY supports */ + /* Only allow advertising what this PHY supports */ phydev->advertising &= phydev->supported; advertise = phydev->advertising; /* Setup standard advertisement */ - oldadv = adv = phy_read(phydev, MII_ADVERTISE); - + adv = phy_read(phydev, MII_ADVERTISE); if (adv < 0) return adv; + oldadv = adv; adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM); adv |= ethtool_adv_to_mii_adv_t(advertise); @@ -666,26 +758,36 @@ static int genphy_config_advert(struct phy_device *phydev) changed = 1; } - /* Configure gigabit if it's supported */ - if (phydev->supported & (SUPPORTED_1000baseT_Half | - SUPPORTED_1000baseT_Full)) { - oldadv = adv = phy_read(phydev, MII_CTRL1000); + bmsr = phy_read(phydev, MII_BMSR); + if (bmsr < 0) + return bmsr; - if (adv < 0) - return adv; + /* Per 802.3-2008, Section 22.2.4.2.16 Extended status all + * 1000Mbits/sec capable PHYs shall have the BMSR_ESTATEN bit set to a + * logical 1. + */ + if (!(bmsr & BMSR_ESTATEN)) + return changed; - adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF); - adv |= ethtool_adv_to_mii_ctrl1000_t(advertise); + /* Configure gigabit if it's supported */ + adv = phy_read(phydev, MII_CTRL1000); + if (adv < 0) + return adv; - if (adv != oldadv) { - err = phy_write(phydev, MII_CTRL1000, adv); + oldadv = adv; + adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF); - if (err < 0) - return err; + if (phydev->supported & (SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full)) { + adv |= ethtool_adv_to_mii_ctrl1000_t(advertise); + if (adv != oldadv) changed = 1; - } } + err = phy_write(phydev, MII_CTRL1000, adv); + if (err < 0) + return err; + return changed; } @@ -697,12 +799,12 @@ static int genphy_config_advert(struct phy_device *phydev) * to the values in phydev. Assumes that the values are valid. * Please see phy_sanitize_settings(). */ -static int genphy_setup_forced(struct phy_device *phydev) +int genphy_setup_forced(struct phy_device *phydev) { - int err; int ctl = 0; - phydev->pause = phydev->asym_pause = 0; + phydev->pause = 0; + phydev->asym_pause = 0; if (SPEED_1000 == phydev->speed) ctl |= BMCR_SPEED1000; @@ -711,12 +813,10 @@ static int genphy_setup_forced(struct phy_device *phydev) if (DUPLEX_FULL == phydev->duplex) ctl |= BMCR_FULLDPLX; - - err = phy_write(phydev, MII_BMCR, ctl); - return err; + return phy_write(phydev, MII_BMCR, ctl); } - +EXPORT_SYMBOL(genphy_setup_forced); /** * genphy_restart_aneg - Enable and Restart Autonegotiation @@ -724,25 +824,20 @@ static int genphy_setup_forced(struct phy_device *phydev) */ int genphy_restart_aneg(struct phy_device *phydev) { - int ctl; - - ctl = phy_read(phydev, MII_BMCR); + int ctl = phy_read(phydev, MII_BMCR); if (ctl < 0) return ctl; - ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); + ctl |= BMCR_ANENABLE | BMCR_ANRESTART; /* Don't isolate the PHY if we're negotiating */ - ctl &= ~(BMCR_ISOLATE); + ctl &= ~BMCR_ISOLATE; - ctl = phy_write(phydev, MII_BMCR, ctl); - - return ctl; + return phy_write(phydev, MII_BMCR, ctl); } EXPORT_SYMBOL(genphy_restart_aneg); - /** * genphy_config_aneg - restart auto-negotiation or write BMCR * @phydev: target phy_device struct @@ -759,13 +854,12 @@ int genphy_config_aneg(struct phy_device *phydev) return genphy_setup_forced(phydev); result = genphy_config_advert(phydev); - if (result < 0) /* error */ return result; - if (result == 0) { /* Advertisement hasn't changed, but maybe aneg was never on to - * begin with? Or maybe phy was isolated? */ + * begin with? Or maybe phy was isolated? + */ int ctl = phy_read(phydev, MII_BMCR); if (ctl < 0) @@ -776,7 +870,8 @@ int genphy_config_aneg(struct phy_device *phydev) } /* Only restart aneg if we are advertising something different - * than we were before. */ + * than we were before. + */ if (result > 0) result = genphy_restart_aneg(phydev); @@ -785,6 +880,27 @@ int genphy_config_aneg(struct phy_device *phydev) EXPORT_SYMBOL(genphy_config_aneg); /** + * genphy_aneg_done - return auto-negotiation status + * @phydev: target phy_device struct + * + * Description: Reads the status register and returns 0 either if + * auto-negotiation is incomplete, or if there was an error. + * Returns BMSR_ANEGCOMPLETE if auto-negotiation is done. + */ +int genphy_aneg_done(struct phy_device *phydev) +{ + int retval = phy_read(phydev, MII_BMSR); + + return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE); +} +EXPORT_SYMBOL(genphy_aneg_done); + +static int gen10g_config_aneg(struct phy_device *phydev) +{ + return 0; +} + +/** * genphy_update_link - update link status in @phydev * @phydev: target phy_device struct * @@ -798,13 +914,11 @@ int genphy_update_link(struct phy_device *phydev) /* Do a fake read */ status = phy_read(phydev, MII_BMSR); - if (status < 0) return status; /* Read link and autonegotiation status */ status = phy_read(phydev, MII_BMSR); - if (status < 0) return status; @@ -832,65 +946,70 @@ int genphy_read_status(struct phy_device *phydev) int err; int lpa; int lpagb = 0; + int common_adv; + int common_adv_gb = 0; - /* Update the link, but return if there - * was an error */ + /* Update the link, but return if there was an error */ err = genphy_update_link(phydev); if (err) return err; + phydev->lp_advertising = 0; + if (AUTONEG_ENABLE == phydev->autoneg) { if (phydev->supported & (SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full)) { lpagb = phy_read(phydev, MII_STAT1000); - if (lpagb < 0) return lpagb; adv = phy_read(phydev, MII_CTRL1000); - if (adv < 0) return adv; - lpagb &= adv << 2; + phydev->lp_advertising = + mii_stat1000_to_ethtool_lpa_t(lpagb); + common_adv_gb = lpagb & adv << 2; } lpa = phy_read(phydev, MII_LPA); - if (lpa < 0) return lpa; - adv = phy_read(phydev, MII_ADVERTISE); + phydev->lp_advertising |= mii_lpa_to_ethtool_lpa_t(lpa); + adv = phy_read(phydev, MII_ADVERTISE); if (adv < 0) return adv; - lpa &= adv; + common_adv = lpa & adv; phydev->speed = SPEED_10; phydev->duplex = DUPLEX_HALF; - phydev->pause = phydev->asym_pause = 0; + phydev->pause = 0; + phydev->asym_pause = 0; - if (lpagb & (LPA_1000FULL | LPA_1000HALF)) { + if (common_adv_gb & (LPA_1000FULL | LPA_1000HALF)) { phydev->speed = SPEED_1000; - if (lpagb & LPA_1000FULL) + if (common_adv_gb & LPA_1000FULL) phydev->duplex = DUPLEX_FULL; - } else if (lpa & (LPA_100FULL | LPA_100HALF)) { + } else if (common_adv & (LPA_100FULL | LPA_100HALF)) { phydev->speed = SPEED_100; - - if (lpa & LPA_100FULL) + + if (common_adv & LPA_100FULL) phydev->duplex = DUPLEX_FULL; } else - if (lpa & LPA_10FULL) + if (common_adv & LPA_10FULL) phydev->duplex = DUPLEX_FULL; - if (phydev->duplex == DUPLEX_FULL){ + if (phydev->duplex == DUPLEX_FULL) { phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0; phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0; } } else { int bmcr = phy_read(phydev, MII_BMCR); + if (bmcr < 0) return bmcr; @@ -906,27 +1025,73 @@ int genphy_read_status(struct phy_device *phydev) else phydev->speed = SPEED_10; - phydev->pause = phydev->asym_pause = 0; + phydev->pause = 0; + phydev->asym_pause = 0; } return 0; } EXPORT_SYMBOL(genphy_read_status); -static int genphy_config_init(struct phy_device *phydev) +static int gen10g_read_status(struct phy_device *phydev) +{ + int devad, reg; + u32 mmd_mask = phydev->c45_ids.devices_in_package; + + phydev->link = 1; + + /* For now just lie and say it's 10G all the time */ + phydev->speed = SPEED_10000; + phydev->duplex = DUPLEX_FULL; + + for (devad = 0; mmd_mask; devad++, mmd_mask = mmd_mask >> 1) { + if (!(mmd_mask & 1)) + continue; + + /* Read twice because link state is latched and a + * read moves the current state into the register + */ + phy_read_mmd(phydev, devad, MDIO_STAT1); + reg = phy_read_mmd(phydev, devad, MDIO_STAT1); + if (reg < 0 || !(reg & MDIO_STAT1_LSTATUS)) + phydev->link = 0; + } + + return 0; +} + +/** + * genphy_soft_reset - software reset the PHY via BMCR_RESET bit + * @phydev: target phy_device struct + * + * Description: Perform a software PHY reset using the standard + * BMCR_RESET bit and poll for the reset bit to be cleared. + * + * Returns: 0 on success, < 0 on failure + */ +int genphy_soft_reset(struct phy_device *phydev) +{ + int ret; + + ret = phy_write(phydev, MII_BMCR, BMCR_RESET); + if (ret < 0) + return ret; + + return phy_poll_reset(phydev); +} +EXPORT_SYMBOL(genphy_soft_reset); + +int genphy_config_init(struct phy_device *phydev) { int val; u32 features; - /* For now, I'll claim that the generic driver supports - * all possible port types */ features = (SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_AUI | SUPPORTED_FIBRE | SUPPORTED_BNC); /* Do we support autonegotiation? */ val = phy_read(phydev, MII_BMSR); - if (val < 0) return val; @@ -944,7 +1109,6 @@ static int genphy_config_init(struct phy_device *phydev) if (val & BMSR_ESTATEN) { val = phy_read(phydev, MII_ESTATUS); - if (val < 0) return val; @@ -954,11 +1118,28 @@ static int genphy_config_init(struct phy_device *phydev) features |= SUPPORTED_1000baseT_Half; } - phydev->supported = features; - phydev->advertising = features; + phydev->supported &= features; + phydev->advertising &= features; + + return 0; +} + +static int gen10g_soft_reset(struct phy_device *phydev) +{ + /* Do nothing for now */ + return 0; +} +EXPORT_SYMBOL(genphy_config_init); + +static int gen10g_config_init(struct phy_device *phydev) +{ + /* Temporarily just say we support everything */ + phydev->supported = SUPPORTED_10000baseT_Full; + phydev->advertising = SUPPORTED_10000baseT_Full; return 0; } + int genphy_suspend(struct phy_device *phydev) { int value; @@ -966,7 +1147,7 @@ int genphy_suspend(struct phy_device *phydev) mutex_lock(&phydev->lock); value = phy_read(phydev, MII_BMCR); - phy_write(phydev, MII_BMCR, (value | BMCR_PDOWN)); + phy_write(phydev, MII_BMCR, value | BMCR_PDOWN); mutex_unlock(&phydev->lock); @@ -974,6 +1155,11 @@ int genphy_suspend(struct phy_device *phydev) } EXPORT_SYMBOL(genphy_suspend); +static int gen10g_suspend(struct phy_device *phydev) +{ + return 0; +} + int genphy_resume(struct phy_device *phydev) { int value; @@ -981,7 +1167,7 @@ int genphy_resume(struct phy_device *phydev) mutex_lock(&phydev->lock); value = phy_read(phydev, MII_BMCR); - phy_write(phydev, MII_BMCR, (value & ~BMCR_PDOWN)); + phy_write(phydev, MII_BMCR, value & ~BMCR_PDOWN); mutex_unlock(&phydev->lock); @@ -989,6 +1175,43 @@ int genphy_resume(struct phy_device *phydev) } EXPORT_SYMBOL(genphy_resume); +static int gen10g_resume(struct phy_device *phydev) +{ + return 0; +} + +static void of_set_phy_supported(struct phy_device *phydev) +{ + struct device_node *node = phydev->dev.of_node; + u32 max_speed; + + if (!IS_ENABLED(CONFIG_OF_MDIO)) + return; + + if (!node) + return; + + if (!of_property_read_u32(node, "max-speed", &max_speed)) { + /* The default values for phydev->supported are provided by the PHY + * driver "features" member, we want to reset to sane defaults fist + * before supporting higher speeds. + */ + phydev->supported &= PHY_DEFAULT_FEATURES; + + switch (max_speed) { + default: + return; + + case SPEED_1000: + phydev->supported |= PHY_1000BT_FEATURES; + case SPEED_100: + phydev->supported |= PHY_100BT_FEATURES; + case SPEED_10: + phydev->supported |= PHY_10BT_FEATURES; + } + } +} + /** * phy_probe - probe and init a PHY device * @dev: device to probe and init @@ -999,22 +1222,18 @@ EXPORT_SYMBOL(genphy_resume); */ static int phy_probe(struct device *dev) { - struct phy_device *phydev; - struct phy_driver *phydrv; - struct device_driver *drv; + struct phy_device *phydev = to_phy_device(dev); + struct device_driver *drv = phydev->dev.driver; + struct phy_driver *phydrv = to_phy_driver(drv); int err = 0; - phydev = to_phy_device(dev); - - drv = phydev->dev.driver; - phydrv = to_phy_driver(drv); phydev->drv = phydrv; /* Disable the interrupt if the PHY doesn't support it * but the interrupt is still a valid one */ if (!(phydrv->flags & PHY_HAS_INTERRUPT) && - phy_interrupt_is_valid(phydev)) + phy_interrupt_is_valid(phydev)) phydev->irq = PHY_POLL; if (phydrv->flags & PHY_IS_INTERNAL) @@ -1024,9 +1243,11 @@ static int phy_probe(struct device *dev) /* Start out supporting everything. Eventually, * a controller will attach, and may modify one - * or both of these values */ + * or both of these values + */ phydev->supported = phydrv->features; - phydev->advertising = phydrv->features; + of_set_phy_supported(phydev); + phydev->advertising = phydev->supported; /* Set the state to READY by default */ phydev->state = PHY_READY; @@ -1037,14 +1258,11 @@ static int phy_probe(struct device *dev) mutex_unlock(&phydev->lock); return err; - } static int phy_remove(struct device *dev) { - struct phy_device *phydev; - - phydev = to_phy_device(dev); + struct phy_device *phydev = to_phy_device(dev); mutex_lock(&phydev->lock); phydev->state = PHY_DOWN; @@ -1071,7 +1289,6 @@ int phy_driver_register(struct phy_driver *new_driver) new_driver->driver.remove = phy_remove; retval = driver_register(&new_driver->driver); - if (retval) { pr_err("%s: Error %d in registering driver\n", new_driver->name, retval); @@ -1110,24 +1327,41 @@ EXPORT_SYMBOL(phy_driver_unregister); void phy_drivers_unregister(struct phy_driver *drv, int n) { int i; - for (i = 0; i < n; i++) { + + for (i = 0; i < n; i++) phy_driver_unregister(drv + i); - } } EXPORT_SYMBOL(phy_drivers_unregister); -static struct phy_driver genphy_driver = { +static struct phy_driver genphy_driver[] = { +{ .phy_id = 0xffffffff, .phy_id_mask = 0xffffffff, .name = "Generic PHY", + .soft_reset = genphy_soft_reset, .config_init = genphy_config_init, - .features = 0, + .features = PHY_GBIT_FEATURES | SUPPORTED_MII | + SUPPORTED_AUI | SUPPORTED_FIBRE | + SUPPORTED_BNC, .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, .suspend = genphy_suspend, .resume = genphy_resume, - .driver = {.owner= THIS_MODULE, }, -}; + .driver = { .owner = THIS_MODULE, }, +}, { + .phy_id = 0xffffffff, + .phy_id_mask = 0xffffffff, + .name = "Generic 10G PHY", + .soft_reset = gen10g_soft_reset, + .config_init = gen10g_config_init, + .features = 0, + .config_aneg = gen10g_config_aneg, + .read_status = gen10g_read_status, + .suspend = gen10g_suspend, + .resume = gen10g_resume, + .driver = {.owner = THIS_MODULE, }, +} }; static int __init phy_init(void) { @@ -1137,7 +1371,8 @@ static int __init phy_init(void) if (rc) return rc; - rc = phy_driver_register(&genphy_driver); + rc = phy_drivers_register(genphy_driver, + ARRAY_SIZE(genphy_driver)); if (rc) mdio_bus_exit(); @@ -1146,7 +1381,8 @@ static int __init phy_init(void) static void __exit phy_exit(void) { - phy_driver_unregister(&genphy_driver); + phy_drivers_unregister(genphy_driver, + ARRAY_SIZE(genphy_driver)); mdio_bus_exit(); } diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index 138de837977..45483fdfbe0 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -64,50 +64,51 @@ static int rtl8211e_config_intr(struct phy_device *phydev) return err; } -/* RTL8211B */ -static struct phy_driver rtl8211b_driver = { - .phy_id = 0x001cc912, - .name = "RTL8211B Gigabit Ethernet", - .phy_id_mask = 0x001fffff, - .features = PHY_GBIT_FEATURES, - .flags = PHY_HAS_INTERRUPT, - .config_aneg = &genphy_config_aneg, - .read_status = &genphy_read_status, - .ack_interrupt = &rtl821x_ack_interrupt, - .config_intr = &rtl8211b_config_intr, - .driver = { .owner = THIS_MODULE,}, -}; - -/* RTL8211E */ -static struct phy_driver rtl8211e_driver = { - .phy_id = 0x001cc915, - .name = "RTL8211E Gigabit Ethernet", - .phy_id_mask = 0x001fffff, - .features = PHY_GBIT_FEATURES, - .flags = PHY_HAS_INTERRUPT, - .config_aneg = &genphy_config_aneg, - .read_status = &genphy_read_status, - .ack_interrupt = &rtl821x_ack_interrupt, - .config_intr = &rtl8211e_config_intr, - .suspend = genphy_suspend, - .resume = genphy_resume, - .driver = { .owner = THIS_MODULE,}, +static struct phy_driver realtek_drvs[] = { + { + .phy_id = 0x00008201, + .name = "RTL8201CP Ethernet", + .phy_id_mask = 0x0000ffff, + .features = PHY_BASIC_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_aneg = &genphy_config_aneg, + .read_status = &genphy_read_status, + .driver = { .owner = THIS_MODULE,}, + }, { + .phy_id = 0x001cc912, + .name = "RTL8211B Gigabit Ethernet", + .phy_id_mask = 0x001fffff, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_aneg = &genphy_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &rtl821x_ack_interrupt, + .config_intr = &rtl8211b_config_intr, + .driver = { .owner = THIS_MODULE,}, + }, { + .phy_id = 0x001cc915, + .name = "RTL8211E Gigabit Ethernet", + .phy_id_mask = 0x001fffff, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_aneg = &genphy_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &rtl821x_ack_interrupt, + .config_intr = &rtl8211e_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, + .driver = { .owner = THIS_MODULE,}, + }, }; static int __init realtek_init(void) { - int ret; - - ret = phy_driver_register(&rtl8211b_driver); - if (ret < 0) - return -ENODEV; - return phy_driver_register(&rtl8211e_driver); + return phy_drivers_register(realtek_drvs, ARRAY_SIZE(realtek_drvs)); } static void __exit realtek_exit(void) { - phy_driver_unregister(&rtl8211b_driver); - phy_driver_unregister(&rtl8211e_driver); + phy_drivers_unregister(realtek_drvs, ARRAY_SIZE(realtek_drvs)); } module_init(realtek_init); diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c index 11f34813e23..180c49479c4 100644 --- a/drivers/net/phy/smsc.c +++ b/drivers/net/phy/smsc.c @@ -249,8 +249,7 @@ static int __init smsc_init(void) static void __exit smsc_exit(void) { - return phy_drivers_unregister(smsc_phy_driver, - ARRAY_SIZE(smsc_phy_driver)); + phy_drivers_unregister(smsc_phy_driver, ARRAY_SIZE(smsc_phy_driver)); } MODULE_DESCRIPTION("SMSC PHY driver"); diff --git a/drivers/net/phy/spi_ks8995.c b/drivers/net/phy/spi_ks8995.c index f3bea134602..22b047f1fcd 100644 --- a/drivers/net/phy/spi_ks8995.c +++ b/drivers/net/phy/spi_ks8995.c @@ -1,5 +1,5 @@ /* - * SPI driver for Micrel/Kendin KS8995M ethernet switch + * SPI driver for Micrel/Kendin KS8995M and KSZ8864RMN ethernet switches * * Copyright (C) 2008 Gabor Juhos <juhosg at openwrt.org> * @@ -15,7 +15,6 @@ #include <linux/types.h> #include <linux/kernel.h> -#include <linux/init.h> #include <linux/module.h> #include <linux/delay.h> #include <linux/device.h> @@ -71,7 +70,10 @@ #define KS8995_REG_IAD1 0x76 /* Indirect Access Data 1 */ #define KS8995_REG_IAD0 0x77 /* Indirect Access Data 0 */ +#define KSZ8864_REG_ID1 0xfe /* Chip ID in bit 7 */ + #define KS8995_REGS_SIZE 0x80 +#define KSZ8864_REGS_SIZE 0x100 #define ID1_CHIPID_M 0xf #define ID1_CHIPID_S 4 @@ -95,6 +97,7 @@ struct ks8995_switch { struct spi_device *spi; struct mutex lock; struct ks8995_pdata *pdata; + struct bin_attribute regs_attr; }; static inline u8 get_chip_id(u8 val) @@ -171,14 +174,14 @@ static int ks8995_write(struct ks8995_switch *ks, char *buf, static inline int ks8995_read_reg(struct ks8995_switch *ks, u8 addr, u8 *buf) { - return (ks8995_read(ks, buf, addr, 1) != 1); + return ks8995_read(ks, buf, addr, 1) != 1; } static inline int ks8995_write_reg(struct ks8995_switch *ks, u8 addr, u8 val) { char buf = val; - return (ks8995_write(ks, &buf, addr, 1) != 1); + return ks8995_write(ks, &buf, addr, 1) != 1; } /* ------------------------------------------------------------------------ */ @@ -217,11 +220,11 @@ static ssize_t ks8995_registers_read(struct file *filp, struct kobject *kobj, dev = container_of(kobj, struct device, kobj); ks8995 = dev_get_drvdata(dev); - if (unlikely(off > KS8995_REGS_SIZE)) + if (unlikely(off > ks8995->regs_attr.size)) return 0; - if ((off + count) > KS8995_REGS_SIZE) - count = KS8995_REGS_SIZE - off; + if ((off + count) > ks8995->regs_attr.size) + count = ks8995->regs_attr.size - off; if (unlikely(!count)) return count; @@ -239,11 +242,11 @@ static ssize_t ks8995_registers_write(struct file *filp, struct kobject *kobj, dev = container_of(kobj, struct device, kobj); ks8995 = dev_get_drvdata(dev); - if (unlikely(off >= KS8995_REGS_SIZE)) + if (unlikely(off >= ks8995->regs_attr.size)) return -EFBIG; - if ((off + count) > KS8995_REGS_SIZE) - count = KS8995_REGS_SIZE - off; + if ((off + count) > ks8995->regs_attr.size) + count = ks8995->regs_attr.size - off; if (unlikely(!count)) return count; @@ -252,7 +255,7 @@ static ssize_t ks8995_registers_write(struct file *filp, struct kobject *kobj, } -static struct bin_attribute ks8995_registers_attr = { +static const struct bin_attribute ks8995_registers_attr = { .attr = { .name = "registers", .mode = S_IRUSR | S_IWUSR, @@ -307,25 +310,48 @@ static int ks8995_probe(struct spi_device *spi) goto err_drvdata; } + memcpy(&ks->regs_attr, &ks8995_registers_attr, sizeof(ks->regs_attr)); + if (get_chip_id(ids[1]) != CHIPID_M) { + u8 val; + + /* Check if this is a KSZ8864RMN */ + err = ks8995_read(ks, &val, KSZ8864_REG_ID1, sizeof(val)); + if (err < 0) { + dev_err(&spi->dev, + "unable to read chip id register, err=%d\n", + err); + goto err_drvdata; + } + if ((val & 0x80) == 0) { + dev_err(&spi->dev, "unknown chip:%02x,0\n", ids[1]); + goto err_drvdata; + } + ks->regs_attr.size = KSZ8864_REGS_SIZE; + } + err = ks8995_reset(ks); if (err) goto err_drvdata; - err = sysfs_create_bin_file(&spi->dev.kobj, &ks8995_registers_attr); + err = sysfs_create_bin_file(&spi->dev.kobj, &ks->regs_attr); if (err) { dev_err(&spi->dev, "unable to create sysfs file, err=%d\n", err); goto err_drvdata; } - dev_info(&spi->dev, "KS89%02X device found, Chip ID:%01x, " - "Revision:%01x\n", ids[0], - get_chip_id(ids[1]), get_chip_rev(ids[1])); + if (get_chip_id(ids[1]) == CHIPID_M) { + dev_info(&spi->dev, + "KS8995 device found, Chip ID:%x, Revision:%x\n", + get_chip_id(ids[1]), get_chip_rev(ids[1])); + } else { + dev_info(&spi->dev, "KSZ8864 device found, Revision:%x\n", + get_chip_rev(ids[1])); + } return 0; err_drvdata: - spi_set_drvdata(spi, NULL); kfree(ks); return err; } @@ -337,7 +363,6 @@ static int ks8995_remove(struct spi_device *spi) ks8995 = spi_get_drvdata(spi); sysfs_remove_bin_file(&spi->dev.kobj, &ks8995_registers_attr); - spi_set_drvdata(spi, NULL); kfree(ks8995); return 0; diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c index 69b482bce7d..5dc0935da99 100644 --- a/drivers/net/phy/vitesse.c +++ b/drivers/net/phy/vitesse.c @@ -3,7 +3,7 @@ * * Author: Kriston Carson * - * Copyright (c) 2005, 2009 Freescale Semiconductor, Inc. + * Copyright (c) 2005, 2009, 2011 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -18,6 +18,11 @@ #include <linux/ethtool.h> #include <linux/phy.h> +/* Vitesse Extended Page Magic Register(s) */ +#define MII_VSC82X4_EXT_PAGE_16E 0x10 +#define MII_VSC82X4_EXT_PAGE_17E 0x11 +#define MII_VSC82X4_EXT_PAGE_18E 0x12 + /* Vitesse Extended Control Register 1 */ #define MII_VSC8244_EXT_CON1 0x17 #define MII_VSC8244_EXTCON1_INIT 0x0000 @@ -54,7 +59,14 @@ #define MII_VSC8221_AUXCONSTAT_INIT 0x0004 /* need to set this bit? */ #define MII_VSC8221_AUXCONSTAT_RESERVED 0x0004 +/* Vitesse Extended Page Access Register */ +#define MII_VSC82X4_EXT_PAGE_ACCESS 0x1f + +#define PHY_ID_VSC8234 0x000fc620 #define PHY_ID_VSC8244 0x000fc6c0 +#define PHY_ID_VSC8514 0x00070670 +#define PHY_ID_VSC8574 0x000704a0 +#define PHY_ID_VSC8662 0x00070660 #define PHY_ID_VSC8221 0x000fc550 #define PHY_ID_VSC8211 0x000fc4b0 @@ -118,7 +130,10 @@ static int vsc82xx_config_intr(struct phy_device *phydev) if (phydev->interrupts == PHY_INTERRUPT_ENABLED) err = phy_write(phydev, MII_VSC8244_IMASK, - phydev->drv->phy_id == PHY_ID_VSC8244 ? + (phydev->drv->phy_id == PHY_ID_VSC8234 || + phydev->drv->phy_id == PHY_ID_VSC8244 || + phydev->drv->phy_id == PHY_ID_VSC8514 || + phydev->drv->phy_id == PHY_ID_VSC8574) ? MII_VSC8244_IMASK_MASK : MII_VSC8221_IMASK_MASK); else { @@ -149,21 +164,126 @@ static int vsc8221_config_init(struct phy_device *phydev) */ } -/* Vitesse 824x */ +/* vsc82x4_config_autocross_enable - Enable auto MDI/MDI-X for forced links + * @phydev: target phy_device struct + * + * Enable auto MDI/MDI-X when in 10/100 forced link speeds by writing + * special values in the VSC8234/VSC8244 extended reserved registers + */ +static int vsc82x4_config_autocross_enable(struct phy_device *phydev) +{ + int ret; + + if (phydev->autoneg == AUTONEG_ENABLE || phydev->speed > SPEED_100) + return 0; + + /* map extended registers set 0x10 - 0x1e */ + ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x52b5); + if (ret >= 0) + ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_18E, 0x0012); + if (ret >= 0) + ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_17E, 0x2803); + if (ret >= 0) + ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_16E, 0x87fa); + /* map standard registers set 0x10 - 0x1e */ + if (ret >= 0) + ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x0000); + else + phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x0000); + + return ret; +} + +/* vsc82x4_config_aneg - restart auto-negotiation or write BMCR + * @phydev: target phy_device struct + * + * Description: If auto-negotiation is enabled, we configure the + * advertising, and then restart auto-negotiation. If it is not + * enabled, then we write the BMCR and also start the auto + * MDI/MDI-X feature + */ +static int vsc82x4_config_aneg(struct phy_device *phydev) +{ + int ret; + + /* Enable auto MDI/MDI-X when in 10/100 forced link speeds by + * writing special values in the VSC8234 extended reserved registers + */ + if (phydev->autoneg != AUTONEG_ENABLE && phydev->speed <= SPEED_100) { + ret = genphy_setup_forced(phydev); + + if (ret < 0) /* error */ + return ret; + + return vsc82x4_config_autocross_enable(phydev); + } + + return genphy_config_aneg(phydev); +} + +/* Vitesse 82xx */ static struct phy_driver vsc82xx_driver[] = { { + .phy_id = PHY_ID_VSC8234, + .name = "Vitesse VSC8234", + .phy_id_mask = 0x000ffff0, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &vsc824x_config_init, + .config_aneg = &vsc82x4_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &vsc824x_ack_interrupt, + .config_intr = &vsc82xx_config_intr, + .driver = { .owner = THIS_MODULE,}, +}, { .phy_id = PHY_ID_VSC8244, .name = "Vitesse VSC8244", .phy_id_mask = 0x000fffc0, .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, .config_init = &vsc824x_config_init, - .config_aneg = &genphy_config_aneg, + .config_aneg = &vsc82x4_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &vsc824x_ack_interrupt, + .config_intr = &vsc82xx_config_intr, + .driver = { .owner = THIS_MODULE,}, +}, { + .phy_id = PHY_ID_VSC8514, + .name = "Vitesse VSC8514", + .phy_id_mask = 0x000ffff0, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &vsc824x_config_init, + .config_aneg = &vsc82x4_config_aneg, .read_status = &genphy_read_status, .ack_interrupt = &vsc824x_ack_interrupt, .config_intr = &vsc82xx_config_intr, .driver = { .owner = THIS_MODULE,}, }, { + .phy_id = PHY_ID_VSC8574, + .name = "Vitesse VSC8574", + .phy_id_mask = 0x000ffff0, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &vsc824x_config_init, + .config_aneg = &vsc82x4_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &vsc824x_ack_interrupt, + .config_intr = &vsc82xx_config_intr, + .driver = { .owner = THIS_MODULE,}, +}, { + .phy_id = PHY_ID_VSC8662, + .name = "Vitesse VSC8662", + .phy_id_mask = 0x000ffff0, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &vsc824x_config_init, + .config_aneg = &vsc82x4_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &vsc824x_ack_interrupt, + .config_intr = &vsc82xx_config_intr, + .driver = { .owner = THIS_MODULE,}, +}, { /* Vitesse 8221 */ .phy_id = PHY_ID_VSC8221, .phy_id_mask = 0x000ffff0, @@ -199,15 +319,18 @@ static int __init vsc82xx_init(void) static void __exit vsc82xx_exit(void) { - return phy_drivers_unregister(vsc82xx_driver, - ARRAY_SIZE(vsc82xx_driver)); + phy_drivers_unregister(vsc82xx_driver, ARRAY_SIZE(vsc82xx_driver)); } module_init(vsc82xx_init); module_exit(vsc82xx_exit); static struct mdio_device_id __maybe_unused vitesse_tbl[] = { + { PHY_ID_VSC8234, 0x000ffff0 }, { PHY_ID_VSC8244, 0x000fffc0 }, + { PHY_ID_VSC8514, 0x000ffff0 }, + { PHY_ID_VSC8574, 0x000ffff0 }, + { PHY_ID_VSC8662, 0x000ffff0 }, { PHY_ID_VSC8221, 0x000ffff0 }, { PHY_ID_VSC8211, 0x000ffff0 }, { } |