aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/phy/vitesse.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy/vitesse.c')
-rw-r--r--drivers/net/phy/vitesse.c248
1 files changed, 193 insertions, 55 deletions
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
index 5d8f6e17bd5..5dc0935da99 100644
--- a/drivers/net/phy/vitesse.c
+++ b/drivers/net/phy/vitesse.c
@@ -3,7 +3,7 @@
*
* Author: Kriston Carson
*
- * Copyright (c) 2005 Freescale Semiconductor, Inc.
+ * Copyright (c) 2005, 2009, 2011 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -18,6 +18,11 @@
#include <linux/ethtool.h>
#include <linux/phy.h>
+/* Vitesse Extended Page Magic Register(s) */
+#define MII_VSC82X4_EXT_PAGE_16E 0x10
+#define MII_VSC82X4_EXT_PAGE_17E 0x11
+#define MII_VSC82X4_EXT_PAGE_18E 0x12
+
/* Vitesse Extended Control Register 1 */
#define MII_VSC8244_EXT_CON1 0x17
#define MII_VSC8244_EXTCON1_INIT 0x0000
@@ -44,56 +49,72 @@
#define MII_VSC8244_ISTAT_DUPLEX 0x1000
/* Vitesse Auxiliary Control/Status Register */
-#define MII_VSC8244_AUX_CONSTAT 0x1c
-#define MII_VSC8244_AUXCONSTAT_INIT 0x0000
-#define MII_VSC8244_AUXCONSTAT_DUPLEX 0x0020
-#define MII_VSC8244_AUXCONSTAT_SPEED 0x0018
-#define MII_VSC8244_AUXCONSTAT_GBIT 0x0010
-#define MII_VSC8244_AUXCONSTAT_100 0x0008
+#define MII_VSC8244_AUX_CONSTAT 0x1c
+#define MII_VSC8244_AUXCONSTAT_INIT 0x0000
+#define MII_VSC8244_AUXCONSTAT_DUPLEX 0x0020
+#define MII_VSC8244_AUXCONSTAT_SPEED 0x0018
+#define MII_VSC8244_AUXCONSTAT_GBIT 0x0010
+#define MII_VSC8244_AUXCONSTAT_100 0x0008
#define MII_VSC8221_AUXCONSTAT_INIT 0x0004 /* need to set this bit? */
#define MII_VSC8221_AUXCONSTAT_RESERVED 0x0004
+/* Vitesse Extended Page Access Register */
+#define MII_VSC82X4_EXT_PAGE_ACCESS 0x1f
+
+#define PHY_ID_VSC8234 0x000fc620
#define PHY_ID_VSC8244 0x000fc6c0
+#define PHY_ID_VSC8514 0x00070670
+#define PHY_ID_VSC8574 0x000704a0
+#define PHY_ID_VSC8662 0x00070660
#define PHY_ID_VSC8221 0x000fc550
+#define PHY_ID_VSC8211 0x000fc4b0
MODULE_DESCRIPTION("Vitesse PHY driver");
MODULE_AUTHOR("Kriston Carson");
MODULE_LICENSE("GPL");
-static int vsc824x_config_init(struct phy_device *phydev)
+static int vsc824x_add_skew(struct phy_device *phydev)
{
- int extcon;
int err;
-
- err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
- MII_VSC8244_AUXCONSTAT_INIT);
- if (err < 0)
- return err;
+ int extcon;
extcon = phy_read(phydev, MII_VSC8244_EXT_CON1);
if (extcon < 0)
- return err;
+ return extcon;
extcon &= ~(MII_VSC8244_EXTCON1_TX_SKEW_MASK |
MII_VSC8244_EXTCON1_RX_SKEW_MASK);
- if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
- extcon |= (MII_VSC8244_EXTCON1_TX_SKEW |
- MII_VSC8244_EXTCON1_RX_SKEW);
+ extcon |= (MII_VSC8244_EXTCON1_TX_SKEW |
+ MII_VSC8244_EXTCON1_RX_SKEW);
err = phy_write(phydev, MII_VSC8244_EXT_CON1, extcon);
return err;
}
+static int vsc824x_config_init(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
+ MII_VSC8244_AUXCONSTAT_INIT);
+ if (err < 0)
+ return err;
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
+ err = vsc824x_add_skew(phydev);
+
+ return err;
+}
+
static int vsc824x_ack_interrupt(struct phy_device *phydev)
{
int err = 0;
-
- /*
- * Don't bother to ACK the interrupts if interrupts
+
+ /* Don't bother to ACK the interrupts if interrupts
* are disabled. The 824x cannot clear the interrupts
* if they are disabled.
*/
@@ -109,12 +130,14 @@ static int vsc82xx_config_intr(struct phy_device *phydev)
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
err = phy_write(phydev, MII_VSC8244_IMASK,
- phydev->drv->phy_id == PHY_ID_VSC8244 ?
+ (phydev->drv->phy_id == PHY_ID_VSC8234 ||
+ phydev->drv->phy_id == PHY_ID_VSC8244 ||
+ phydev->drv->phy_id == PHY_ID_VSC8514 ||
+ phydev->drv->phy_id == PHY_ID_VSC8574) ?
MII_VSC8244_IMASK_MASK :
MII_VSC8221_IMASK_MASK);
else {
- /*
- * The Vitesse PHY cannot clear the interrupt
+ /* The Vitesse PHY cannot clear the interrupt
* once it has disabled them, so we clear them first
*/
err = phy_read(phydev, MII_VSC8244_ISTAT);
@@ -128,21 +151,6 @@ static int vsc82xx_config_intr(struct phy_device *phydev)
return err;
}
-/* Vitesse 824x */
-static struct phy_driver vsc8244_driver = {
- .phy_id = PHY_ID_VSC8244,
- .name = "Vitesse VSC8244",
- .phy_id_mask = 0x000fffc0,
- .features = PHY_GBIT_FEATURES,
- .flags = PHY_HAS_INTERRUPT,
- .config_init = &vsc824x_config_init,
- .config_aneg = &genphy_config_aneg,
- .read_status = &genphy_read_status,
- .ack_interrupt = &vsc824x_ack_interrupt,
- .config_intr = &vsc82xx_config_intr,
- .driver = { .owner = THIS_MODULE,},
-};
-
static int vsc8221_config_init(struct phy_device *phydev)
{
int err;
@@ -152,11 +160,131 @@ static int vsc8221_config_init(struct phy_device *phydev)
return err;
/* Perhaps we should set EXT_CON1 based on the interface?
- Options are 802.3Z SerDes or SGMII */
+ * Options are 802.3Z SerDes or SGMII
+ */
+}
+
+/* vsc82x4_config_autocross_enable - Enable auto MDI/MDI-X for forced links
+ * @phydev: target phy_device struct
+ *
+ * Enable auto MDI/MDI-X when in 10/100 forced link speeds by writing
+ * special values in the VSC8234/VSC8244 extended reserved registers
+ */
+static int vsc82x4_config_autocross_enable(struct phy_device *phydev)
+{
+ int ret;
+
+ if (phydev->autoneg == AUTONEG_ENABLE || phydev->speed > SPEED_100)
+ return 0;
+
+ /* map extended registers set 0x10 - 0x1e */
+ ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x52b5);
+ if (ret >= 0)
+ ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_18E, 0x0012);
+ if (ret >= 0)
+ ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_17E, 0x2803);
+ if (ret >= 0)
+ ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_16E, 0x87fa);
+ /* map standard registers set 0x10 - 0x1e */
+ if (ret >= 0)
+ ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x0000);
+ else
+ phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x0000);
+
+ return ret;
+}
+
+/* vsc82x4_config_aneg - restart auto-negotiation or write BMCR
+ * @phydev: target phy_device struct
+ *
+ * Description: If auto-negotiation is enabled, we configure the
+ * advertising, and then restart auto-negotiation. If it is not
+ * enabled, then we write the BMCR and also start the auto
+ * MDI/MDI-X feature
+ */
+static int vsc82x4_config_aneg(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Enable auto MDI/MDI-X when in 10/100 forced link speeds by
+ * writing special values in the VSC8234 extended reserved registers
+ */
+ if (phydev->autoneg != AUTONEG_ENABLE && phydev->speed <= SPEED_100) {
+ ret = genphy_setup_forced(phydev);
+
+ if (ret < 0) /* error */
+ return ret;
+
+ return vsc82x4_config_autocross_enable(phydev);
+ }
+
+ return genphy_config_aneg(phydev);
}
-/* Vitesse 8221 */
-static struct phy_driver vsc8221_driver = {
+/* Vitesse 82xx */
+static struct phy_driver vsc82xx_driver[] = {
+{
+ .phy_id = PHY_ID_VSC8234,
+ .name = "Vitesse VSC8234",
+ .phy_id_mask = 0x000ffff0,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &vsc824x_config_init,
+ .config_aneg = &vsc82x4_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &vsc824x_ack_interrupt,
+ .config_intr = &vsc82xx_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = PHY_ID_VSC8244,
+ .name = "Vitesse VSC8244",
+ .phy_id_mask = 0x000fffc0,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &vsc824x_config_init,
+ .config_aneg = &vsc82x4_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &vsc824x_ack_interrupt,
+ .config_intr = &vsc82xx_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = PHY_ID_VSC8514,
+ .name = "Vitesse VSC8514",
+ .phy_id_mask = 0x000ffff0,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &vsc824x_config_init,
+ .config_aneg = &vsc82x4_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &vsc824x_ack_interrupt,
+ .config_intr = &vsc82xx_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = PHY_ID_VSC8574,
+ .name = "Vitesse VSC8574",
+ .phy_id_mask = 0x000ffff0,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &vsc824x_config_init,
+ .config_aneg = &vsc82x4_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &vsc824x_ack_interrupt,
+ .config_intr = &vsc82xx_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = PHY_ID_VSC8662,
+ .name = "Vitesse VSC8662",
+ .phy_id_mask = 0x000ffff0,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &vsc824x_config_init,
+ .config_aneg = &vsc82x4_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &vsc824x_ack_interrupt,
+ .config_intr = &vsc82xx_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ /* Vitesse 8221 */
.phy_id = PHY_ID_VSC8221,
.phy_id_mask = 0x000ffff0,
.name = "Vitesse VSC8221",
@@ -167,34 +295,44 @@ static struct phy_driver vsc8221_driver = {
.read_status = &genphy_read_status,
.ack_interrupt = &vsc824x_ack_interrupt,
.config_intr = &vsc82xx_config_intr,
- .driver = { .owner = THIS_MODULE,},
-};
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ /* Vitesse 8211 */
+ .phy_id = PHY_ID_VSC8211,
+ .phy_id_mask = 0x000ffff0,
+ .name = "Vitesse VSC8211",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &vsc8221_config_init,
+ .config_aneg = &genphy_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &vsc824x_ack_interrupt,
+ .config_intr = &vsc82xx_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+} };
static int __init vsc82xx_init(void)
{
- int err;
-
- err = phy_driver_register(&vsc8244_driver);
- if (err < 0)
- return err;
- err = phy_driver_register(&vsc8221_driver);
- if (err < 0)
- phy_driver_unregister(&vsc8244_driver);
- return err;
+ return phy_drivers_register(vsc82xx_driver,
+ ARRAY_SIZE(vsc82xx_driver));
}
static void __exit vsc82xx_exit(void)
{
- phy_driver_unregister(&vsc8244_driver);
- phy_driver_unregister(&vsc8221_driver);
+ phy_drivers_unregister(vsc82xx_driver, ARRAY_SIZE(vsc82xx_driver));
}
module_init(vsc82xx_init);
module_exit(vsc82xx_exit);
static struct mdio_device_id __maybe_unused vitesse_tbl[] = {
+ { PHY_ID_VSC8234, 0x000ffff0 },
{ PHY_ID_VSC8244, 0x000fffc0 },
+ { PHY_ID_VSC8514, 0x000ffff0 },
+ { PHY_ID_VSC8574, 0x000ffff0 },
+ { PHY_ID_VSC8662, 0x000ffff0 },
{ PHY_ID_VSC8221, 0x000ffff0 },
+ { PHY_ID_VSC8211, 0x000ffff0 },
{ }
};
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-04 01:49:21 +0000