diff options
Diffstat (limited to 'drivers/net/phy/smsc.c')
| -rw-r--r-- | drivers/net/phy/smsc.c | 179 |
1 files changed, 106 insertions, 73 deletions
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c index 5123bb954dd..180c49479c4 100644 --- a/drivers/net/phy/smsc.c +++ b/drivers/net/phy/smsc.c @@ -12,7 +12,7 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * - * Support added for SMSC LAN8187 and LAN8700 by steve.glendinning@smsc.com + * Support added for SMSC LAN8187 and LAN8700 by steve.glendinning@shawell.net * */ @@ -22,23 +22,7 @@ #include <linux/ethtool.h> #include <linux/phy.h> #include <linux/netdevice.h> - -#define MII_LAN83C185_ISF 29 /* Interrupt Source Flags */ -#define MII_LAN83C185_IM 30 /* Interrupt Mask */ - -#define MII_LAN83C185_ISF_INT1 (1<<1) /* Auto-Negotiation Page Received */ -#define MII_LAN83C185_ISF_INT2 (1<<2) /* Parallel Detection Fault */ -#define MII_LAN83C185_ISF_INT3 (1<<3) /* Auto-Negotiation LP Ack */ -#define MII_LAN83C185_ISF_INT4 (1<<4) /* Link Down */ -#define MII_LAN83C185_ISF_INT5 (1<<5) /* Remote Fault Detected */ -#define MII_LAN83C185_ISF_INT6 (1<<6) /* Auto-Negotiation complete */ -#define MII_LAN83C185_ISF_INT7 (1<<7) /* ENERGYON */ - -#define MII_LAN83C185_ISF_INT_ALL (0x0e) - -#define MII_LAN83C185_ISF_INT_PHYLIB_EVENTS \ - (MII_LAN83C185_ISF_INT6 | MII_LAN83C185_ISF_INT4) - +#include <linux/smscphy.h> static int smsc_phy_config_intr(struct phy_device *phydev) { @@ -59,11 +43,93 @@ static int smsc_phy_ack_interrupt(struct phy_device *phydev) static int smsc_phy_config_init(struct phy_device *phydev) { + int rc = phy_read(phydev, MII_LAN83C185_SPECIAL_MODES); + if (rc < 0) + return rc; + + /* If the SMSC PHY is in power down mode, then set it + * in all capable mode before using it. + */ + if ((rc & MII_LAN83C185_MODE_MASK) == MII_LAN83C185_MODE_POWERDOWN) { + int timeout = 50000; + + /* set "all capable" mode and reset the phy */ + rc |= MII_LAN83C185_MODE_ALL; + phy_write(phydev, MII_LAN83C185_SPECIAL_MODES, rc); + phy_write(phydev, MII_BMCR, BMCR_RESET); + + /* wait end of reset (max 500 ms) */ + do { + udelay(10); + if (timeout-- == 0) + return -1; + rc = phy_read(phydev, MII_BMCR); + } while (rc & BMCR_RESET); + } + + rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); + if (rc < 0) + return rc; + + /* Enable energy detect mode for this SMSC Transceivers */ + rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS, + rc | MII_LAN83C185_EDPWRDOWN); + if (rc < 0) + return rc; + return smsc_phy_ack_interrupt (phydev); } +static int lan911x_config_init(struct phy_device *phydev) +{ + return smsc_phy_ack_interrupt(phydev); +} -static struct phy_driver lan83c185_driver = { +/* + * The LAN8710/LAN8720 requires a minimum of 2 link pulses within 64ms of each + * other in order to set the ENERGYON bit and exit EDPD mode. If a link partner + * does send the pulses within this interval, the PHY will remained powered + * down. + * + * This workaround will manually toggle the PHY on/off upon calls to read_status + * in order to generate link test pulses if the link is down. If a link partner + * is present, it will respond to the pulses, which will cause the ENERGYON bit + * to be set and will cause the EDPD mode to be exited. + */ +static int lan87xx_read_status(struct phy_device *phydev) +{ + int err = genphy_read_status(phydev); + + if (!phydev->link) { + /* Disable EDPD to wake up PHY */ + int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); + if (rc < 0) + return rc; + + rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS, + rc & ~MII_LAN83C185_EDPWRDOWN); + if (rc < 0) + return rc; + + /* Sleep 64 ms to allow ~5 link test pulses to be sent */ + msleep(64); + + /* Re-enable EDPD */ + rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); + if (rc < 0) + return rc; + + rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS, + rc | MII_LAN83C185_EDPWRDOWN); + if (rc < 0) + return rc; + } + + return err; +} + +static struct phy_driver smsc_phy_driver[] = { +{ .phy_id = 0x0007c0a0, /* OUI=0x00800f, Model#=0x0a */ .phy_id_mask = 0xfffffff0, .name = "SMSC LAN83C185", @@ -85,9 +151,7 @@ static struct phy_driver lan83c185_driver = { .resume = genphy_resume, .driver = { .owner = THIS_MODULE, } -}; - -static struct phy_driver lan8187_driver = { +}, { .phy_id = 0x0007c0b0, /* OUI=0x00800f, Model#=0x0b */ .phy_id_mask = 0xfffffff0, .name = "SMSC LAN8187", @@ -109,9 +173,7 @@ static struct phy_driver lan8187_driver = { .resume = genphy_resume, .driver = { .owner = THIS_MODULE, } -}; - -static struct phy_driver lan8700_driver = { +}, { .phy_id = 0x0007c0c0, /* OUI=0x00800f, Model#=0x0c */ .phy_id_mask = 0xfffffff0, .name = "SMSC LAN8700", @@ -133,9 +195,7 @@ static struct phy_driver lan8700_driver = { .resume = genphy_resume, .driver = { .owner = THIS_MODULE, } -}; - -static struct phy_driver lan911x_int_driver = { +}, { .phy_id = 0x0007c0d0, /* OUI=0x00800f, Model#=0x0d */ .phy_id_mask = 0xfffffff0, .name = "SMSC LAN911x Internal PHY", @@ -147,7 +207,7 @@ static struct phy_driver lan911x_int_driver = { /* basic functions */ .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .config_init = smsc_phy_config_init, + .config_init = lan911x_config_init, /* IRQ related */ .ack_interrupt = smsc_phy_ack_interrupt, @@ -157,9 +217,7 @@ static struct phy_driver lan911x_int_driver = { .resume = genphy_resume, .driver = { .owner = THIS_MODULE, } -}; - -static struct phy_driver lan8710_driver = { +}, { .phy_id = 0x0007c0f0, /* OUI=0x00800f, Model#=0x0f */ .phy_id_mask = 0xfffffff0, .name = "SMSC LAN8710/LAN8720", @@ -170,7 +228,7 @@ static struct phy_driver lan8710_driver = { /* basic functions */ .config_aneg = genphy_config_aneg, - .read_status = genphy_read_status, + .read_status = lan87xx_read_status, .config_init = smsc_phy_config_init, /* IRQ related */ @@ -181,53 +239,17 @@ static struct phy_driver lan8710_driver = { .resume = genphy_resume, .driver = { .owner = THIS_MODULE, } -}; +} }; static int __init smsc_init(void) { - int ret; - - ret = phy_driver_register (&lan83c185_driver); - if (ret) - goto err1; - - ret = phy_driver_register (&lan8187_driver); - if (ret) - goto err2; - - ret = phy_driver_register (&lan8700_driver); - if (ret) - goto err3; - - ret = phy_driver_register (&lan911x_int_driver); - if (ret) - goto err4; - - ret = phy_driver_register (&lan8710_driver); - if (ret) - goto err5; - - return 0; - -err5: - phy_driver_unregister (&lan911x_int_driver); -err4: - phy_driver_unregister (&lan8700_driver); -err3: - phy_driver_unregister (&lan8187_driver); -err2: - phy_driver_unregister (&lan83c185_driver); -err1: - return ret; + return phy_drivers_register(smsc_phy_driver, + ARRAY_SIZE(smsc_phy_driver)); } static void __exit smsc_exit(void) { - phy_driver_unregister (&lan8710_driver); - phy_driver_unregister (&lan911x_int_driver); - phy_driver_unregister (&lan8700_driver); - phy_driver_unregister (&lan8187_driver); - phy_driver_unregister (&lan83c185_driver); + phy_drivers_unregister(smsc_phy_driver, ARRAY_SIZE(smsc_phy_driver)); } MODULE_DESCRIPTION("SMSC PHY driver"); @@ -236,3 +258,14 @@ MODULE_LICENSE("GPL"); module_init(smsc_init); module_exit(smsc_exit); + +static struct mdio_device_id __maybe_unused smsc_tbl[] = { + { 0x0007c0a0, 0xfffffff0 }, + { 0x0007c0b0, 0xfffffff0 }, + { 0x0007c0c0, 0xfffffff0 }, + { 0x0007c0d0, 0xfffffff0 }, + { 0x0007c0f0, 0xfffffff0 }, + { } +}; + +MODULE_DEVICE_TABLE(mdio, smsc_tbl); |