diff options
Diffstat (limited to 'drivers/net/phy/micrel.c')
| -rw-r--r-- | drivers/net/phy/micrel.c | 202 |
1 files changed, 193 insertions, 9 deletions
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index c31aad0004c..bc7c7d2f75f 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -81,14 +81,14 @@ static int ksz_config_flags(struct phy_device *phydev) } static int kszphy_extended_write(struct phy_device *phydev, - u32 regnum, u16 val) + u32 regnum, u16 val) { phy_write(phydev, MII_KSZPHY_EXTREG, KSZPHY_EXTREG_WRITE | regnum); return phy_write(phydev, MII_KSZPHY_EXTREG_WRITE, val); } static int kszphy_extended_read(struct phy_device *phydev, - u32 regnum) + u32 regnum) { phy_write(phydev, MII_KSZPHY_EXTREG, regnum); return phy_read(phydev, MII_KSZPHY_EXTREG_READ); @@ -148,15 +148,52 @@ static int ks8737_config_intr(struct phy_device *phydev) return rc < 0 ? rc : 0; } +static int kszphy_setup_led(struct phy_device *phydev, + unsigned int reg, unsigned int shift) +{ + + struct device *dev = &phydev->dev; + struct device_node *of_node = dev->of_node; + int rc, temp; + u32 val; + + if (!of_node && dev->parent->of_node) + of_node = dev->parent->of_node; + + if (of_property_read_u32(of_node, "micrel,led-mode", &val)) + return 0; + + temp = phy_read(phydev, reg); + if (temp < 0) + return temp; + + temp &= ~(3 << shift); + temp |= val << shift; + rc = phy_write(phydev, reg, temp); + + return rc < 0 ? rc : 0; +} + static int kszphy_config_init(struct phy_device *phydev) { return 0; } +static int kszphy_config_init_led8041(struct phy_device *phydev) +{ + /* single led control, register 0x1e bits 15..14 */ + return kszphy_setup_led(phydev, 0x1e, 14); +} + static int ksz8021_config_init(struct phy_device *phydev) { - int rc; const u16 val = KSZPHY_OMSO_B_CAST_OFF | KSZPHY_OMSO_RMII_OVERRIDE; + int rc; + + rc = kszphy_setup_led(phydev, 0x1f, 4); + if (rc) + dev_err(&phydev->dev, "failed to set led mode\n"); + phy_write(phydev, MII_KSZPHY_OMSO, val); rc = ksz_config_flags(phydev); return rc < 0 ? rc : 0; @@ -166,6 +203,10 @@ static int ks8051_config_init(struct phy_device *phydev) { int rc; + rc = kszphy_setup_led(phydev, 0x1f, 4); + if (rc) + dev_err(&phydev->dev, "failed to set led mode\n"); + rc = ksz_config_flags(phydev); return rc < 0 ? rc : 0; } @@ -205,13 +246,13 @@ static int ksz9021_load_values_from_of(struct phy_device *phydev, if (val1 != -1) newval = ((newval & 0xfff0) | ((val1 / PS_TO_REG) & 0xf) << 0); - if (val2 != -1) + if (val2 != -2) newval = ((newval & 0xff0f) | ((val2 / PS_TO_REG) & 0xf) << 4); - if (val3 != -1) + if (val3 != -3) newval = ((newval & 0xf0ff) | ((val3 / PS_TO_REG) & 0xf) << 8); - if (val4 != -1) + if (val4 != -4) newval = ((newval & 0x0fff) | ((val4 / PS_TO_REG) & 0xf) << 12); return kszphy_extended_write(phydev, reg, newval); @@ -242,6 +283,110 @@ static int ksz9021_config_init(struct phy_device *phydev) return 0; } +#define MII_KSZ9031RN_MMD_CTRL_REG 0x0d +#define MII_KSZ9031RN_MMD_REGDATA_REG 0x0e +#define OP_DATA 1 +#define KSZ9031_PS_TO_REG 60 + +/* Extended registers */ +#define MII_KSZ9031RN_CONTROL_PAD_SKEW 4 +#define MII_KSZ9031RN_RX_DATA_PAD_SKEW 5 +#define MII_KSZ9031RN_TX_DATA_PAD_SKEW 6 +#define MII_KSZ9031RN_CLK_PAD_SKEW 8 + +static int ksz9031_extended_write(struct phy_device *phydev, + u8 mode, u32 dev_addr, u32 regnum, u16 val) +{ + phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, dev_addr); + phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, regnum); + phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, (mode << 14) | dev_addr); + return phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, val); +} + +static int ksz9031_extended_read(struct phy_device *phydev, + u8 mode, u32 dev_addr, u32 regnum) +{ + phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, dev_addr); + phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, regnum); + phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, (mode << 14) | dev_addr); + return phy_read(phydev, MII_KSZ9031RN_MMD_REGDATA_REG); +} + +static int ksz9031_of_load_skew_values(struct phy_device *phydev, + struct device_node *of_node, + u16 reg, size_t field_sz, + char *field[], u8 numfields) +{ + int val[4] = {-1, -2, -3, -4}; + int matches = 0; + u16 mask; + u16 maxval; + u16 newval; + int i; + + for (i = 0; i < numfields; i++) + if (!of_property_read_u32(of_node, field[i], val + i)) + matches++; + + if (!matches) + return 0; + + if (matches < numfields) + newval = ksz9031_extended_read(phydev, OP_DATA, 2, reg); + else + newval = 0; + + maxval = (field_sz == 4) ? 0xf : 0x1f; + for (i = 0; i < numfields; i++) + if (val[i] != -(i + 1)) { + mask = 0xffff; + mask ^= maxval << (field_sz * i); + newval = (newval & mask) | + (((val[i] / KSZ9031_PS_TO_REG) & maxval) + << (field_sz * i)); + } + + return ksz9031_extended_write(phydev, OP_DATA, 2, reg, newval); +} + +static int ksz9031_config_init(struct phy_device *phydev) +{ + struct device *dev = &phydev->dev; + struct device_node *of_node = dev->of_node; + char *clk_skews[2] = {"rxc-skew-ps", "txc-skew-ps"}; + char *rx_data_skews[4] = { + "rxd0-skew-ps", "rxd1-skew-ps", + "rxd2-skew-ps", "rxd3-skew-ps" + }; + char *tx_data_skews[4] = { + "txd0-skew-ps", "txd1-skew-ps", + "txd2-skew-ps", "txd3-skew-ps" + }; + char *control_skews[2] = {"txen-skew-ps", "rxdv-skew-ps"}; + + if (!of_node && dev->parent->of_node) + of_node = dev->parent->of_node; + + if (of_node) { + ksz9031_of_load_skew_values(phydev, of_node, + MII_KSZ9031RN_CLK_PAD_SKEW, 5, + clk_skews, 2); + + ksz9031_of_load_skew_values(phydev, of_node, + MII_KSZ9031RN_CONTROL_PAD_SKEW, 4, + control_skews, 2); + + ksz9031_of_load_skew_values(phydev, of_node, + MII_KSZ9031RN_RX_DATA_PAD_SKEW, 4, + rx_data_skews, 4); + + ksz9031_of_load_skew_values(phydev, of_node, + MII_KSZ9031RN_TX_DATA_PAD_SKEW, 4, + tx_data_skews, 4); + } + return 0; +} + #define KSZ8873MLL_GLOBAL_CONTROL_4 0x06 #define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX (1 << 6) #define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED (1 << 4) @@ -287,6 +432,8 @@ static struct phy_driver ksphy_driver[] = { .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, .config_intr = ks8737_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, .driver = { .owner = THIS_MODULE,}, }, { .phy_id = PHY_ID_KSZ8021, @@ -300,6 +447,8 @@ static struct phy_driver ksphy_driver[] = { .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, .config_intr = kszphy_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, .driver = { .owner = THIS_MODULE,}, }, { .phy_id = PHY_ID_KSZ8031, @@ -313,6 +462,8 @@ static struct phy_driver ksphy_driver[] = { .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, .config_intr = kszphy_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, .driver = { .owner = THIS_MODULE,}, }, { .phy_id = PHY_ID_KSZ8041, @@ -321,11 +472,28 @@ static struct phy_driver ksphy_driver[] = { .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, - .config_init = kszphy_config_init, + .config_init = kszphy_config_init_led8041, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, .config_intr = kszphy_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, + .driver = { .owner = THIS_MODULE,}, +}, { + .phy_id = PHY_ID_KSZ8041RNLI, + .phy_id_mask = 0x00fffff0, + .name = "Micrel KSZ8041RNLI", + .features = PHY_BASIC_FEATURES | + SUPPORTED_Pause | SUPPORTED_Asym_Pause, + .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .config_init = kszphy_config_init_led8041, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = kszphy_ack_interrupt, + .config_intr = kszphy_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, .driver = { .owner = THIS_MODULE,}, }, { .phy_id = PHY_ID_KSZ8051, @@ -339,6 +507,8 @@ static struct phy_driver ksphy_driver[] = { .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, .config_intr = kszphy_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, .driver = { .owner = THIS_MODULE,}, }, { .phy_id = PHY_ID_KSZ8001, @@ -346,11 +516,13 @@ static struct phy_driver ksphy_driver[] = { .phy_id_mask = 0x00ffffff, .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, - .config_init = kszphy_config_init, + .config_init = kszphy_config_init_led8041, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, .config_intr = kszphy_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, .driver = { .owner = THIS_MODULE,}, }, { .phy_id = PHY_ID_KSZ8081, @@ -363,6 +535,8 @@ static struct phy_driver ksphy_driver[] = { .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, .config_intr = kszphy_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, .driver = { .owner = THIS_MODULE,}, }, { .phy_id = PHY_ID_KSZ8061, @@ -375,6 +549,8 @@ static struct phy_driver ksphy_driver[] = { .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, .config_intr = kszphy_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, .driver = { .owner = THIS_MODULE,}, }, { .phy_id = PHY_ID_KSZ9021, @@ -387,6 +563,8 @@ static struct phy_driver ksphy_driver[] = { .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, .config_intr = ksz9021_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, .driver = { .owner = THIS_MODULE, }, }, { .phy_id = PHY_ID_KSZ9031, @@ -395,11 +573,13 @@ static struct phy_driver ksphy_driver[] = { .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, - .config_init = kszphy_config_init, + .config_init = ksz9031_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, .config_intr = ksz9021_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, .driver = { .owner = THIS_MODULE, }, }, { .phy_id = PHY_ID_KSZ8873MLL, @@ -410,6 +590,8 @@ static struct phy_driver ksphy_driver[] = { .config_init = kszphy_config_init, .config_aneg = ksz8873mll_config_aneg, .read_status = ksz8873mll_read_status, + .suspend = genphy_suspend, + .resume = genphy_resume, .driver = { .owner = THIS_MODULE, }, }, { .phy_id = PHY_ID_KSZ886X, @@ -420,6 +602,8 @@ static struct phy_driver ksphy_driver[] = { .config_init = kszphy_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, + .suspend = genphy_suspend, + .resume = genphy_resume, .driver = { .owner = THIS_MODULE, }, } }; |