diff options
Diffstat (limited to 'drivers/net/phy/marvell.c')
| -rw-r--r-- | drivers/net/phy/marvell.c | 264 |
1 files changed, 247 insertions, 17 deletions
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 5d2a3f21588..bd37e45c89c 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -7,6 +7,8 @@ * * Copyright (c) 2004 Freescale Semiconductor, Inc. * + * Copyright (c) 2013 Michael Stapelberg <michael@stapelberg.de> + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your @@ -32,9 +34,9 @@ #include <linux/marvell_phy.h> #include <linux/of.h> -#include <asm/io.h> +#include <linux/io.h> #include <asm/irq.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #define MII_MARVELL_PHY_PAGE 22 @@ -80,6 +82,28 @@ #define MII_88E1318S_PHY_MSCR1_REG 16 #define MII_88E1318S_PHY_MSCR1_PAD_ODD BIT(6) +/* Copper Specific Interrupt Enable Register */ +#define MII_88E1318S_PHY_CSIER 0x12 +/* WOL Event Interrupt Enable */ +#define MII_88E1318S_PHY_CSIER_WOL_EIE BIT(7) + +/* LED Timer Control Register */ +#define MII_88E1318S_PHY_LED_PAGE 0x03 +#define MII_88E1318S_PHY_LED_TCR 0x12 +#define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15) +#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7) +#define MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW BIT(11) + +/* Magic Packet MAC address registers */ +#define MII_88E1318S_PHY_MAGIC_PACKET_WORD2 0x17 +#define MII_88E1318S_PHY_MAGIC_PACKET_WORD1 0x18 +#define MII_88E1318S_PHY_MAGIC_PACKET_WORD0 0x19 + +#define MII_88E1318S_PHY_WOL_PAGE 0x11 +#define MII_88E1318S_PHY_WOL_CTRL 0x10 +#define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS BIT(12) +#define MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE BIT(14) + #define MII_88E1121_PHY_LED_CTRL 16 #define MII_88E1121_PHY_LED_PAGE 3 #define MII_88E1121_PHY_LED_DEF 0x0030 @@ -92,6 +116,8 @@ #define MII_M1011_PHY_STATUS_RESOLVED 0x0800 #define MII_M1011_PHY_STATUS_LINK 0x0400 +#define MII_M1116R_CONTROL_REG_MAC 21 + MODULE_DESCRIPTION("Marvell PHY driver"); MODULE_AUTHOR("Andy Fleming"); @@ -348,19 +374,70 @@ static int m88e1318_config_aneg(struct phy_device *phydev) return m88e1121_config_aneg(phydev); } -static int m88e1111_config_init(struct phy_device *phydev) +static int m88e1510_config_aneg(struct phy_device *phydev) { int err; + + err = m88e1318_config_aneg(phydev); + if (err < 0) + return err; + + return marvell_of_reg_init(phydev); +} + +static int m88e1116r_config_init(struct phy_device *phydev) +{ int temp; + int err; + + temp = phy_read(phydev, MII_BMCR); + temp |= BMCR_RESET; + err = phy_write(phydev, MII_BMCR, temp); + if (err < 0) + return err; + + mdelay(500); - /* Enable Fiber/Copper auto selection */ - temp = phy_read(phydev, MII_M1111_PHY_EXT_SR); - temp &= ~MII_M1111_HWCFG_FIBER_COPPER_AUTO; - phy_write(phydev, MII_M1111_PHY_EXT_SR, temp); + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0); + if (err < 0) + return err; + + temp = phy_read(phydev, MII_M1011_PHY_SCR); + temp |= (7 << 12); /* max number of gigabit attempts */ + temp |= (1 << 11); /* enable downshift */ + temp |= MII_M1011_PHY_SCR_AUTO_CROSS; + err = phy_write(phydev, MII_M1011_PHY_SCR, temp); + if (err < 0) + return err; + + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 2); + if (err < 0) + return err; + temp = phy_read(phydev, MII_M1116R_CONTROL_REG_MAC); + temp |= (1 << 5); + temp |= (1 << 4); + err = phy_write(phydev, MII_M1116R_CONTROL_REG_MAC, temp); + if (err < 0) + return err; + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0); + if (err < 0) + return err; temp = phy_read(phydev, MII_BMCR); temp |= BMCR_RESET; - phy_write(phydev, MII_BMCR, temp); + err = phy_write(phydev, MII_BMCR, temp); + if (err < 0) + return err; + + mdelay(500); + + return 0; +} + +static int m88e1111_config_init(struct phy_device *phydev) +{ + int err; + int temp; if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) || (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) || @@ -705,6 +782,107 @@ static int m88e1121_did_interrupt(struct phy_device *phydev) return 0; } +static void m88e1318_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol) +{ + wol->supported = WAKE_MAGIC; + wol->wolopts = 0; + + if (phy_write(phydev, MII_MARVELL_PHY_PAGE, + MII_88E1318S_PHY_WOL_PAGE) < 0) + return; + + if (phy_read(phydev, MII_88E1318S_PHY_WOL_CTRL) & + MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE) + wol->wolopts |= WAKE_MAGIC; + + if (phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x00) < 0) + return; +} + +static int m88e1318_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol) +{ + int err, oldpage, temp; + + oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE); + + if (wol->wolopts & WAKE_MAGIC) { + /* Explicitly switch to page 0x00, just to be sure */ + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x00); + if (err < 0) + return err; + + /* Enable the WOL interrupt */ + temp = phy_read(phydev, MII_88E1318S_PHY_CSIER); + temp |= MII_88E1318S_PHY_CSIER_WOL_EIE; + err = phy_write(phydev, MII_88E1318S_PHY_CSIER, temp); + if (err < 0) + return err; + + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, + MII_88E1318S_PHY_LED_PAGE); + if (err < 0) + return err; + + /* Setup LED[2] as interrupt pin (active low) */ + temp = phy_read(phydev, MII_88E1318S_PHY_LED_TCR); + temp &= ~MII_88E1318S_PHY_LED_TCR_FORCE_INT; + temp |= MII_88E1318S_PHY_LED_TCR_INTn_ENABLE; + temp |= MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW; + err = phy_write(phydev, MII_88E1318S_PHY_LED_TCR, temp); + if (err < 0) + return err; + + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, + MII_88E1318S_PHY_WOL_PAGE); + if (err < 0) + return err; + + /* Store the device address for the magic packet */ + err = phy_write(phydev, MII_88E1318S_PHY_MAGIC_PACKET_WORD2, + ((phydev->attached_dev->dev_addr[5] << 8) | + phydev->attached_dev->dev_addr[4])); + if (err < 0) + return err; + err = phy_write(phydev, MII_88E1318S_PHY_MAGIC_PACKET_WORD1, + ((phydev->attached_dev->dev_addr[3] << 8) | + phydev->attached_dev->dev_addr[2])); + if (err < 0) + return err; + err = phy_write(phydev, MII_88E1318S_PHY_MAGIC_PACKET_WORD0, + ((phydev->attached_dev->dev_addr[1] << 8) | + phydev->attached_dev->dev_addr[0])); + if (err < 0) + return err; + + /* Clear WOL status and enable magic packet matching */ + temp = phy_read(phydev, MII_88E1318S_PHY_WOL_CTRL); + temp |= MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS; + temp |= MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE; + err = phy_write(phydev, MII_88E1318S_PHY_WOL_CTRL, temp); + if (err < 0) + return err; + } else { + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, + MII_88E1318S_PHY_WOL_PAGE); + if (err < 0) + return err; + + /* Clear WOL status and disable magic packet matching */ + temp = phy_read(phydev, MII_88E1318S_PHY_WOL_CTRL); + temp |= MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS; + temp &= ~MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE; + err = phy_write(phydev, MII_88E1318S_PHY_WOL_CTRL, temp); + if (err < 0) + return err; + } + + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage); + if (err < 0) + return err; + + return 0; +} + static struct phy_driver marvell_drivers[] = { { .phy_id = MARVELL_PHY_ID_88E1101, @@ -716,6 +894,8 @@ static struct phy_driver marvell_drivers[] = { .read_status = &genphy_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, + .resume = &genphy_resume, + .suspend = &genphy_suspend, .driver = { .owner = THIS_MODULE }, }, { @@ -729,6 +909,8 @@ static struct phy_driver marvell_drivers[] = { .read_status = &genphy_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, + .resume = &genphy_resume, + .suspend = &genphy_suspend, .driver = { .owner = THIS_MODULE }, }, { @@ -742,6 +924,8 @@ static struct phy_driver marvell_drivers[] = { .read_status = &marvell_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, + .resume = &genphy_resume, + .suspend = &genphy_suspend, .driver = { .owner = THIS_MODULE }, }, { @@ -755,6 +939,8 @@ static struct phy_driver marvell_drivers[] = { .read_status = &genphy_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, + .resume = &genphy_resume, + .suspend = &genphy_suspend, .driver = {.owner = THIS_MODULE,}, }, { @@ -768,6 +954,8 @@ static struct phy_driver marvell_drivers[] = { .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, .did_interrupt = &m88e1121_did_interrupt, + .resume = &genphy_resume, + .suspend = &genphy_suspend, .driver = { .owner = THIS_MODULE }, }, { @@ -781,6 +969,10 @@ static struct phy_driver marvell_drivers[] = { .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, .did_interrupt = &m88e1121_did_interrupt, + .get_wol = &m88e1318_get_wol, + .set_wol = &m88e1318_set_wol, + .resume = &genphy_resume, + .suspend = &genphy_suspend, .driver = { .owner = THIS_MODULE }, }, { @@ -794,6 +986,8 @@ static struct phy_driver marvell_drivers[] = { .read_status = &genphy_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, + .resume = &genphy_resume, + .suspend = &genphy_suspend, .driver = { .owner = THIS_MODULE }, }, { @@ -807,6 +1001,8 @@ static struct phy_driver marvell_drivers[] = { .read_status = &genphy_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, + .resume = &genphy_resume, + .suspend = &genphy_suspend, .driver = { .owner = THIS_MODULE }, }, { @@ -820,6 +1016,38 @@ static struct phy_driver marvell_drivers[] = { .read_status = &genphy_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, + .resume = &genphy_resume, + .suspend = &genphy_suspend, + .driver = { .owner = THIS_MODULE }, + }, + { + .phy_id = MARVELL_PHY_ID_88E1116R, + .phy_id_mask = MARVELL_PHY_ID_MASK, + .name = "Marvell 88E1116R", + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &m88e1116r_config_init, + .config_aneg = &genphy_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &marvell_ack_interrupt, + .config_intr = &marvell_config_intr, + .resume = &genphy_resume, + .suspend = &genphy_suspend, + .driver = { .owner = THIS_MODULE }, + }, + { + .phy_id = MARVELL_PHY_ID_88E1510, + .phy_id_mask = MARVELL_PHY_ID_MASK, + .name = "Marvell 88E1510", + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_aneg = &m88e1510_config_aneg, + .read_status = &marvell_read_status, + .ack_interrupt = &marvell_ack_interrupt, + .config_intr = &marvell_config_intr, + .did_interrupt = &m88e1121_did_interrupt, + .resume = &genphy_resume, + .suspend = &genphy_suspend, .driver = { .owner = THIS_MODULE }, }, }; @@ -840,15 +1068,17 @@ module_init(marvell_init); module_exit(marvell_exit); static struct mdio_device_id __maybe_unused marvell_tbl[] = { - { 0x01410c60, 0xfffffff0 }, - { 0x01410c90, 0xfffffff0 }, - { 0x01410cc0, 0xfffffff0 }, - { 0x01410e10, 0xfffffff0 }, - { 0x01410cb0, 0xfffffff0 }, - { 0x01410cd0, 0xfffffff0 }, - { 0x01410e50, 0xfffffff0 }, - { 0x01410e30, 0xfffffff0 }, - { 0x01410e90, 0xfffffff0 }, + { MARVELL_PHY_ID_88E1101, MARVELL_PHY_ID_MASK }, + { MARVELL_PHY_ID_88E1112, MARVELL_PHY_ID_MASK }, + { MARVELL_PHY_ID_88E1111, MARVELL_PHY_ID_MASK }, + { MARVELL_PHY_ID_88E1118, MARVELL_PHY_ID_MASK }, + { MARVELL_PHY_ID_88E1121R, MARVELL_PHY_ID_MASK }, + { MARVELL_PHY_ID_88E1145, MARVELL_PHY_ID_MASK }, + { MARVELL_PHY_ID_88E1149R, MARVELL_PHY_ID_MASK }, + { MARVELL_PHY_ID_88E1240, MARVELL_PHY_ID_MASK }, + { MARVELL_PHY_ID_88E1318S, MARVELL_PHY_ID_MASK }, + { MARVELL_PHY_ID_88E1116R, MARVELL_PHY_ID_MASK }, + { MARVELL_PHY_ID_88E1510, MARVELL_PHY_ID_MASK }, { } }; |