diff options
Diffstat (limited to 'drivers/net/phy/lxt.c')
| -rw-r--r-- | drivers/net/phy/lxt.c | 215 |
1 files changed, 188 insertions, 27 deletions
diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c index 4cf3324ba16..9108f319170 100644 --- a/drivers/net/phy/lxt.c +++ b/drivers/net/phy/lxt.c @@ -17,7 +17,6 @@ #include <linux/string.h> #include <linux/errno.h> #include <linux/unistd.h> -#include <linux/slab.h> #include <linux/interrupt.h> #include <linux/init.h> #include <linux/delay.h> @@ -54,6 +53,9 @@ #define MII_LXT971_ISR 19 /* Interrupt Status Register */ +/* register definitions for the 973 */ +#define MII_LXT973_PCR 16 /* Port Configuration Register */ +#define PCR_FIBER_SELECT 1 MODULE_DESCRIPTION("Intel LXT PHY driver"); MODULE_AUTHOR("Andy Fleming"); @@ -80,7 +82,7 @@ static int lxt970_config_intr(struct phy_device *phydev) { int err; - if(phydev->interrupts == PHY_INTERRUPT_ENABLED) + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) err = phy_write(phydev, MII_LXT970_IER, MII_LXT970_IER_IEN); else err = phy_write(phydev, MII_LXT970_IER, 0); @@ -112,7 +114,7 @@ static int lxt971_config_intr(struct phy_device *phydev) { int err; - if(phydev->interrupts == PHY_INTERRUPT_ENABLED) + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) err = phy_write(phydev, MII_LXT971_IER, MII_LXT971_IER_IEN); else err = phy_write(phydev, MII_LXT971_IER, 0); @@ -120,7 +122,152 @@ static int lxt971_config_intr(struct phy_device *phydev) return err; } -static struct phy_driver lxt970_driver = { +/* + * A2 version of LXT973 chip has an ERRATA: it randomly return the contents + * of the previous even register when you read a odd register regularly + */ + +static int lxt973a2_update_link(struct phy_device *phydev) +{ + int status; + int control; + int retry = 8; /* we try 8 times */ + + /* Do a fake read */ + status = phy_read(phydev, MII_BMSR); + + if (status < 0) + return status; + + control = phy_read(phydev, MII_BMCR); + if (control < 0) + return control; + + do { + /* Read link and autonegotiation status */ + status = phy_read(phydev, MII_BMSR); + } while (status >= 0 && retry-- && status == control); + + if (status < 0) + return status; + + if ((status & BMSR_LSTATUS) == 0) + phydev->link = 0; + else + phydev->link = 1; + + return 0; +} + +static int lxt973a2_read_status(struct phy_device *phydev) +{ + int adv; + int err; + int lpa; + int lpagb = 0; + + /* Update the link, but return if there was an error */ + err = lxt973a2_update_link(phydev); + if (err) + return err; + + if (AUTONEG_ENABLE == phydev->autoneg) { + int retry = 1; + + adv = phy_read(phydev, MII_ADVERTISE); + + if (adv < 0) + return adv; + + do { + lpa = phy_read(phydev, MII_LPA); + + if (lpa < 0) + return lpa; + + /* If both registers are equal, it is suspect but not + * impossible, hence a new try + */ + } while (lpa == adv && retry--); + + lpa &= adv; + + phydev->speed = SPEED_10; + phydev->duplex = DUPLEX_HALF; + phydev->pause = phydev->asym_pause = 0; + + if (lpagb & (LPA_1000FULL | LPA_1000HALF)) { + phydev->speed = SPEED_1000; + + if (lpagb & LPA_1000FULL) + phydev->duplex = DUPLEX_FULL; + } else if (lpa & (LPA_100FULL | LPA_100HALF)) { + phydev->speed = SPEED_100; + + if (lpa & LPA_100FULL) + phydev->duplex = DUPLEX_FULL; + } else { + if (lpa & LPA_10FULL) + phydev->duplex = DUPLEX_FULL; + } + + if (phydev->duplex == DUPLEX_FULL) { + phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0; + phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0; + } + } else { + int bmcr = phy_read(phydev, MII_BMCR); + + if (bmcr < 0) + return bmcr; + + if (bmcr & BMCR_FULLDPLX) + phydev->duplex = DUPLEX_FULL; + else + phydev->duplex = DUPLEX_HALF; + + if (bmcr & BMCR_SPEED1000) + phydev->speed = SPEED_1000; + else if (bmcr & BMCR_SPEED100) + phydev->speed = SPEED_100; + else + phydev->speed = SPEED_10; + + phydev->pause = phydev->asym_pause = 0; + } + + return 0; +} + +static int lxt973_probe(struct phy_device *phydev) +{ + int val = phy_read(phydev, MII_LXT973_PCR); + + if (val & PCR_FIBER_SELECT) { + /* + * If fiber is selected, then the only correct setting + * is 100Mbps, full duplex, and auto negotiation off. + */ + val = phy_read(phydev, MII_BMCR); + val |= (BMCR_SPEED100 | BMCR_FULLDPLX); + val &= ~BMCR_ANENABLE; + phy_write(phydev, MII_BMCR, val); + /* Remember that the port is in fiber mode. */ + phydev->priv = lxt973_probe; + } else { + phydev->priv = NULL; + } + return 0; +} + +static int lxt973_config_aneg(struct phy_device *phydev) +{ + /* Do nothing if port is in fiber mode. */ + return phydev->priv ? 0 : genphy_config_aneg(phydev); +} + +static struct phy_driver lxt97x_driver[] = { +{ .phy_id = 0x78100000, .name = "LXT970", .phy_id_mask = 0xfffffff0, @@ -131,10 +278,8 @@ static struct phy_driver lxt970_driver = { .read_status = genphy_read_status, .ack_interrupt = lxt970_ack_interrupt, .config_intr = lxt970_config_intr, - .driver = { .owner = THIS_MODULE,}, -}; - -static struct phy_driver lxt971_driver = { + .driver = { .owner = THIS_MODULE,}, +}, { .phy_id = 0x001378e0, .name = "LXT971", .phy_id_mask = 0xfffffff0, @@ -144,33 +289,49 @@ static struct phy_driver lxt971_driver = { .read_status = genphy_read_status, .ack_interrupt = lxt971_ack_interrupt, .config_intr = lxt971_config_intr, - .driver = { .owner = THIS_MODULE,}, -}; + .driver = { .owner = THIS_MODULE,}, +}, { + .phy_id = 0x00137a10, + .name = "LXT973-A2", + .phy_id_mask = 0xffffffff, + .features = PHY_BASIC_FEATURES, + .flags = 0, + .probe = lxt973_probe, + .config_aneg = lxt973_config_aneg, + .read_status = lxt973a2_read_status, + .driver = { .owner = THIS_MODULE,}, +}, { + .phy_id = 0x00137a10, + .name = "LXT973", + .phy_id_mask = 0xfffffff0, + .features = PHY_BASIC_FEATURES, + .flags = 0, + .probe = lxt973_probe, + .config_aneg = lxt973_config_aneg, + .read_status = genphy_read_status, + .driver = { .owner = THIS_MODULE,}, +} }; static int __init lxt_init(void) { - int ret; - - ret = phy_driver_register(&lxt970_driver); - if (ret) - goto err1; - - ret = phy_driver_register(&lxt971_driver); - if (ret) - goto err2; - return 0; - - err2: - phy_driver_unregister(&lxt970_driver); - err1: - return ret; + return phy_drivers_register(lxt97x_driver, + ARRAY_SIZE(lxt97x_driver)); } static void __exit lxt_exit(void) { - phy_driver_unregister(&lxt970_driver); - phy_driver_unregister(&lxt971_driver); + phy_drivers_unregister(lxt97x_driver, + ARRAY_SIZE(lxt97x_driver)); } module_init(lxt_init); module_exit(lxt_exit); + +static struct mdio_device_id __maybe_unused lxt_tbl[] = { + { 0x78100000, 0xfffffff0 }, + { 0x001378e0, 0xfffffff0 }, + { 0x00137a10, 0xfffffff0 }, + { } +}; + +MODULE_DEVICE_TABLE(mdio, lxt_tbl); |