1 files changed, 376 insertions, 0 deletions
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
new file mode 100644
index 00000000000..fdc1b418fa6
--- /dev/null
+++ b/drivers/net/phy/at803x.c
@@ -0,0 +1,376 @@
+/*
+ * drivers/net/phy/at803x.c
+ *
+ * Driver for Atheros 803x PHY
+ *
+ * Author: Matus Ujhelyi <ujhelyi.m@gmail.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/phy.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
+
+#define AT803X_INTR_ENABLE			0x12
+#define AT803X_INTR_STATUS			0x13
+#define AT803X_SMART_SPEED			0x14
+#define AT803X_LED_CONTROL			0x18
+#define AT803X_WOL_ENABLE			0x01
+#define AT803X_DEVICE_ADDR			0x03
+#define AT803X_LOC_MAC_ADDR_0_15_OFFSET		0x804C
+#define AT803X_LOC_MAC_ADDR_16_31_OFFSET	0x804B
+#define AT803X_LOC_MAC_ADDR_32_47_OFFSET	0x804A
+#define AT803X_MMD_ACCESS_CONTROL		0x0D
+#define AT803X_MMD_ACCESS_CONTROL_DATA		0x0E
+#define AT803X_FUNC_DATA			0x4003
+#define AT803X_INER				0x0012
+#define AT803X_INER_INIT			0xec00
+#define AT803X_INSR				0x0013
+#define AT803X_DEBUG_ADDR			0x1D
+#define AT803X_DEBUG_DATA			0x1E
+#define AT803X_DEBUG_SYSTEM_MODE_CTRL		0x05
+#define AT803X_DEBUG_RGMII_TX_CLK_DLY		BIT(8)
+
+#define ATH8030_PHY_ID 0x004dd076
+#define ATH8031_PHY_ID 0x004dd074
+#define ATH8035_PHY_ID 0x004dd072
+
+MODULE_DESCRIPTION("Atheros 803x PHY driver");
+MODULE_AUTHOR("Matus Ujhelyi");
+MODULE_LICENSE("GPL");
+
+struct at803x_priv {
+	bool phy_reset:1;
+	struct gpio_desc *gpiod_reset;
+};
+
+struct at803x_context {
+	u16 bmcr;
+	u16 advertise;
+	u16 control1000;
+	u16 int_enable;
+	u16 smart_speed;
+	u16 led_control;
+};
+
+/* save relevant PHY registers to private copy */
+static void at803x_context_save(struct phy_device *phydev,
+				struct at803x_context *context)
+{
+	context->bmcr = phy_read(phydev, MII_BMCR);
+	context->advertise = phy_read(phydev, MII_ADVERTISE);
+	context->control1000 = phy_read(phydev, MII_CTRL1000);
+	context->int_enable = phy_read(phydev, AT803X_INTR_ENABLE);
+	context->smart_speed = phy_read(phydev, AT803X_SMART_SPEED);
+	context->led_control = phy_read(phydev, AT803X_LED_CONTROL);
+}
+
+/* restore relevant PHY registers from private copy */
+static void at803x_context_restore(struct phy_device *phydev,
+				   const struct at803x_context *context)
+{
+	phy_write(phydev, MII_BMCR, context->bmcr);
+	phy_write(phydev, MII_ADVERTISE, context->advertise);
+	phy_write(phydev, MII_CTRL1000, context->control1000);
+	phy_write(phydev, AT803X_INTR_ENABLE, context->int_enable);
+	phy_write(phydev, AT803X_SMART_SPEED, context->smart_speed);
+	phy_write(phydev, AT803X_LED_CONTROL, context->led_control);
+}
+
+static int at803x_set_wol(struct phy_device *phydev,
+			  struct ethtool_wolinfo *wol)
+{
+	struct net_device *ndev = phydev->attached_dev;
+	const u8 *mac;
+	int ret;
+	u32 value;
+	unsigned int i, offsets[] = {
+		AT803X_LOC_MAC_ADDR_32_47_OFFSET,
+		AT803X_LOC_MAC_ADDR_16_31_OFFSET,
+		AT803X_LOC_MAC_ADDR_0_15_OFFSET,
+	};
+
+	if (!ndev)
+		return -ENODEV;
+
+	if (wol->wolopts & WAKE_MAGIC) {
+		mac = (const u8 *) ndev->dev_addr;
+
+		if (!is_valid_ether_addr(mac))
+			return -EFAULT;
+
+		for (i = 0; i < 3; i++) {
+			phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
+				  AT803X_DEVICE_ADDR);
+			phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
+				  offsets[i]);
+			phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
+				  AT803X_FUNC_DATA);
+			phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
+				  mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
+		}
+
+		value = phy_read(phydev, AT803X_INTR_ENABLE);
+		value |= AT803X_WOL_ENABLE;
+		ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
+		if (ret)
+			return ret;
+		value = phy_read(phydev, AT803X_INTR_STATUS);
+	} else {
+		value = phy_read(phydev, AT803X_INTR_ENABLE);
+		value &= (~AT803X_WOL_ENABLE);
+		ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
+		if (ret)
+			return ret;
+		value = phy_read(phydev, AT803X_INTR_STATUS);
+	}
+
+	return ret;
+}
+
+static void at803x_get_wol(struct phy_device *phydev,
+			   struct ethtool_wolinfo *wol)
+{
+	u32 value;
+
+	wol->supported = WAKE_MAGIC;
+	wol->wolopts = 0;
+
+	value = phy_read(phydev, AT803X_INTR_ENABLE);
+	if (value & AT803X_WOL_ENABLE)
+		wol->wolopts |= WAKE_MAGIC;
+}
+
+static int at803x_suspend(struct phy_device *phydev)
+{
+	int value;
+	int wol_enabled;
+
+	mutex_lock(&phydev->lock);
+
+	value = phy_read(phydev, AT803X_INTR_ENABLE);
+	wol_enabled = value & AT803X_WOL_ENABLE;
+
+	value = phy_read(phydev, MII_BMCR);
+
+	if (wol_enabled)
+		value |= BMCR_ISOLATE;
+	else
+		value |= BMCR_PDOWN;
+
+	phy_write(phydev, MII_BMCR, value);
+
+	mutex_unlock(&phydev->lock);
+
+	return 0;
+}
+
+static int at803x_resume(struct phy_device *phydev)
+{
+	int value;
+
+	mutex_lock(&phydev->lock);
+
+	value = phy_read(phydev, MII_BMCR);
+	value &= ~(BMCR_PDOWN | BMCR_ISOLATE);
+	phy_write(phydev, MII_BMCR, value);
+
+	mutex_unlock(&phydev->lock);
+
+	return 0;
+}
+
+static int at803x_probe(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->dev;
+	struct at803x_priv *priv;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->gpiod_reset = devm_gpiod_get(dev, "reset");
+	if (IS_ERR(priv->gpiod_reset))
+		priv->gpiod_reset = NULL;
+	else
+		gpiod_direction_output(priv->gpiod_reset, 1);
+
+	phydev->priv = priv;
+
+	return 0;
+}
+
+static int at803x_config_init(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = genphy_config_init(phydev);
+	if (ret < 0)
+		return ret;
+
+	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
+		ret = phy_write(phydev, AT803X_DEBUG_ADDR,
+				AT803X_DEBUG_SYSTEM_MODE_CTRL);
+		if (ret)
+			return ret;
+		ret = phy_write(phydev, AT803X_DEBUG_DATA,
+				AT803X_DEBUG_RGMII_TX_CLK_DLY);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int at803x_ack_interrupt(struct phy_device *phydev)
+{
+	int err;
+
+	err = phy_read(phydev, AT803X_INSR);
+
+	return (err < 0) ? err : 0;
+}
+
+static int at803x_config_intr(struct phy_device *phydev)
+{
+	int err;
+	int value;
+
+	value = phy_read(phydev, AT803X_INER);
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+		err = phy_write(phydev, AT803X_INER,
+				value | AT803X_INER_INIT);
+	else
+		err = phy_write(phydev, AT803X_INER, 0);
+
+	return err;
+}
+
+static void at803x_link_change_notify(struct phy_device *phydev)
+{
+	struct at803x_priv *priv = phydev->priv;
+
+	/*
+	 * Conduct a hardware reset for AT8030 every time a link loss is
+	 * signalled. This is necessary to circumvent a hardware bug that
+	 * occurs when the cable is unplugged while TX packets are pending
+	 * in the FIFO. In such cases, the FIFO enters an error mode it
+	 * cannot recover from by software.
+	 */
+	if (phydev->drv->phy_id == ATH8030_PHY_ID) {
+		if (phydev->state == PHY_NOLINK) {
+			if (priv->gpiod_reset && !priv->phy_reset) {
+				struct at803x_context context;
+
+				at803x_context_save(phydev, &context);
+
+				gpiod_set_value(priv->gpiod_reset, 0);
+				msleep(1);
+				gpiod_set_value(priv->gpiod_reset, 1);
+				msleep(1);
+
+				at803x_context_restore(phydev, &context);
+
+				dev_dbg(&phydev->dev, "%s(): phy was reset\n",
+					__func__);
+				priv->phy_reset = true;
+			}
+		} else {
+			priv->phy_reset = false;
+		}
+	}
+}
+
+static struct phy_driver at803x_driver[] = {
+{
+	/* ATHEROS 8035 */
+	.phy_id			= ATH8035_PHY_ID,
+	.name			= "Atheros 8035 ethernet",
+	.phy_id_mask		= 0xffffffef,
+	.probe			= at803x_probe,
+	.config_init		= at803x_config_init,
+	.link_change_notify	= at803x_link_change_notify,
+	.set_wol		= at803x_set_wol,
+	.get_wol		= at803x_get_wol,
+	.suspend		= at803x_suspend,
+	.resume			= at803x_resume,
+	.features		= PHY_GBIT_FEATURES,
+	.flags			= PHY_HAS_INTERRUPT,
+	.config_aneg		= genphy_config_aneg,
+	.read_status		= genphy_read_status,
+	.driver			= {
+		.owner = THIS_MODULE,
+	},
+}, {
+	/* ATHEROS 8030 */
+	.phy_id			= ATH8030_PHY_ID,
+	.name			= "Atheros 8030 ethernet",
+	.phy_id_mask		= 0xffffffef,
+	.probe			= at803x_probe,
+	.config_init		= at803x_config_init,
+	.link_change_notify	= at803x_link_change_notify,
+	.set_wol		= at803x_set_wol,
+	.get_wol		= at803x_get_wol,
+	.suspend		= at803x_suspend,
+	.resume			= at803x_resume,
+	.features		= PHY_GBIT_FEATURES,
+	.flags			= PHY_HAS_INTERRUPT,
+	.config_aneg		= genphy_config_aneg,
+	.read_status		= genphy_read_status,
+	.driver			= {
+		.owner = THIS_MODULE,
+	},
+}, {
+	/* ATHEROS 8031 */
+	.phy_id			= ATH8031_PHY_ID,
+	.name			= "Atheros 8031 ethernet",
+	.phy_id_mask		= 0xffffffef,
+	.probe			= at803x_probe,
+	.config_init		= at803x_config_init,
+	.link_change_notify	= at803x_link_change_notify,
+	.set_wol		= at803x_set_wol,
+	.get_wol		= at803x_get_wol,
+	.suspend		= at803x_suspend,
+	.resume			= at803x_resume,
+	.features		= PHY_GBIT_FEATURES,
+	.flags			= PHY_HAS_INTERRUPT,
+	.config_aneg		= genphy_config_aneg,
+	.read_status		= genphy_read_status,
+	.ack_interrupt		= &at803x_ack_interrupt,
+	.config_intr		= &at803x_config_intr,
+	.driver			= {
+		.owner = THIS_MODULE,
+	},
+} };
+
+static int __init atheros_init(void)
+{
+	return phy_drivers_register(at803x_driver,
+				    ARRAY_SIZE(at803x_driver));
+}
+
+static void __exit atheros_exit(void)
+{
+	phy_drivers_unregister(at803x_driver, ARRAY_SIZE(at803x_driver));
+}
+
+module_init(atheros_init);
+module_exit(atheros_exit);
+
+static struct mdio_device_id __maybe_unused atheros_tbl[] = {
+	{ ATH8030_PHY_ID, 0xffffffef },
+	{ ATH8031_PHY_ID, 0xffffffef },
+	{ ATH8035_PHY_ID, 0xffffffef },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, atheros_tbl);