diff options
Diffstat (limited to 'drivers/net/phy/Kconfig')
| -rw-r--r-- | drivers/net/phy/Kconfig | 185 |
1 files changed, 174 insertions, 11 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index fa39b944bc4..65de0cab8d0 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -2,48 +2,211 @@ # PHY Layer Configuration # -menu "PHY device support" - -config PHYLIB +menuconfig PHYLIB tristate "PHY Device support and infrastructure" - depends on NET_ETHERNET && (BROKEN || !S390) + depends on NETDEVICES help Ethernet controllers are usually attached to PHY devices. This option provides infrastructure for managing PHY devices. +if PHYLIB + comment "MII PHY device drivers" - depends on PHYLIB + +config AT803X_PHY + tristate "Drivers for Atheros AT803X PHYs" + ---help--- + Currently supports the AT8030 and AT8035 model + +config AMD_PHY + tristate "Drivers for the AMD PHYs" + ---help--- + Currently supports the am79c874 + +config AMD_XGBE_PHY + tristate "Driver for the AMD 10GbE (amd-xgbe) PHYs" + depends on OF + ---help--- + Currently supports the AMD 10GbE PHY config MARVELL_PHY tristate "Drivers for Marvell PHYs" - depends on PHYLIB ---help--- Currently has a driver for the 88E1011S config DAVICOM_PHY tristate "Drivers for Davicom PHYs" - depends on PHYLIB ---help--- Currently supports dm9161e and dm9131 config QSEMI_PHY tristate "Drivers for Quality Semiconductor PHYs" - depends on PHYLIB ---help--- Currently supports the qs6612 config LXT_PHY tristate "Drivers for the Intel LXT PHYs" - depends on PHYLIB ---help--- Currently supports the lxt970, lxt971 config CICADA_PHY tristate "Drivers for the Cicada PHYs" - depends on PHYLIB ---help--- Currently supports the cis8204 -endmenu +config VITESSE_PHY + tristate "Drivers for the Vitesse PHYs" + ---help--- + Currently supports the vsc8244 + +config SMSC_PHY + tristate "Drivers for SMSC PHYs" + ---help--- + Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs + +config BROADCOM_PHY + tristate "Drivers for Broadcom PHYs" + ---help--- + Currently supports the BCM5411, BCM5421, BCM5461, BCM5464, BCM5481 + and BCM5482 PHYs. + +config BCM63XX_PHY + tristate "Drivers for Broadcom 63xx SOCs internal PHY" + depends on BCM63XX + ---help--- + Currently supports the 6348 and 6358 PHYs. + +config BCM7XXX_PHY + tristate "Drivers for Broadcom 7xxx SOCs internal PHYs" + ---help--- + Currently supports the BCM7366, BCM7439, BCM7445, and + 40nm and 65nm generation of BCM7xxx Set Top Box SoCs. + +config BCM87XX_PHY + tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs" + help + Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs. + +config ICPLUS_PHY + tristate "Drivers for ICPlus PHYs" + ---help--- + Currently supports the IP175C and IP1001 PHYs. + +config REALTEK_PHY + tristate "Drivers for Realtek PHYs" + ---help--- + Supports the Realtek 821x PHY. + +config NATIONAL_PHY + tristate "Drivers for National Semiconductor PHYs" + ---help--- + Currently supports the DP83865 PHY. + +config STE10XP + tristate "Driver for STMicroelectronics STe10Xp PHYs" + ---help--- + This is the driver for the STe100p and STe101p PHYs. + +config LSI_ET1011C_PHY + tristate "Driver for LSI ET1011C PHY" + ---help--- + Supports the LSI ET1011C PHY. + +config MICREL_PHY + tristate "Driver for Micrel PHYs" + ---help--- + Supports the KSZ9021, VSC8201, KS8001 PHYs. + +config FIXED_PHY + bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" + depends on PHYLIB=y + ---help--- + Adds the platform "fixed" MDIO Bus to cover the boards that use + PHYs that are not connected to the real MDIO bus. + + Currently tested with mpc866ads and mpc8349e-mitx. + +config MDIO_BITBANG + tristate "Support for bitbanged MDIO buses" + help + This module implements the MDIO bus protocol in software, + for use by low level drivers that export the ability to + drive the relevant pins. + + If in doubt, say N. + +config MDIO_GPIO + tristate "Support for GPIO lib-based bitbanged MDIO buses" + depends on MDIO_BITBANG && GPIOLIB + ---help--- + Supports GPIO lib-based MDIO busses. + + To compile this driver as a module, choose M here: the module + will be called mdio-gpio. + +config MDIO_OCTEON + tristate "Support for MDIO buses on Octeon SOCs" + depends on CAVIUM_OCTEON_SOC + default y + help + + This module provides a driver for the Octeon MDIO busses. + It is required by the Octeon Ethernet device drivers. + + If in doubt, say Y. + +config MDIO_SUN4I + tristate "Allwinner sun4i MDIO interface support" + depends on ARCH_SUNXI + select REGULATOR + select REGULATOR_FIXED_VOLTAGE + help + This driver supports the MDIO interface found in the network + interface units of the Allwinner SoC that have an EMAC (A10, + A12, A10s, etc.) + +config MDIO_MOXART + tristate "MOXA ART MDIO interface support" + depends on ARCH_MOXART + help + This driver supports the MDIO interface found in the network + interface units of the MOXA ART SoC + +config MDIO_BUS_MUX + tristate + depends on OF_MDIO + help + This module provides a driver framework for MDIO bus + multiplexers which connect one of several child MDIO busses + to a parent bus. Switching between child busses is done by + device specific drivers. + +config MDIO_BUS_MUX_GPIO + tristate "Support for GPIO controlled MDIO bus multiplexers" + depends on OF_GPIO && OF_MDIO + select MDIO_BUS_MUX + help + This module provides a driver for MDIO bus multiplexers that + are controlled via GPIO lines. The multiplexer connects one of + several child MDIO busses to a parent bus. Child bus + selection is under the control of GPIO lines. + +config MDIO_BUS_MUX_MMIOREG + tristate "Support for MMIO device-controlled MDIO bus multiplexers" + depends on OF_MDIO + select MDIO_BUS_MUX + help + This module provides a driver for MDIO bus multiplexers that + are controlled via a simple memory-mapped device, like an FPGA. + The multiplexer connects one of several child MDIO busses to a + parent bus. Child bus selection is under the control of one of + the FPGA's registers. + + Currently, only 8-bit registers are supported. + +endif # PHYLIB +config MICREL_KS8995MA + tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch" + depends on SPI |