diff options
Diffstat (limited to 'drivers/net/phy/Kconfig')
| -rw-r--r-- | drivers/net/phy/Kconfig | 86 |
1 files changed, 83 insertions, 3 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 392a6c4b72e..65de0cab8d0 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -4,7 +4,6 @@ menuconfig PHYLIB tristate "PHY Device support and infrastructure" - depends on !S390 depends on NETDEVICES help Ethernet controllers are usually attached to PHY @@ -15,6 +14,22 @@ if PHYLIB comment "MII PHY device drivers" +config AT803X_PHY + tristate "Drivers for Atheros AT803X PHYs" + ---help--- + Currently supports the AT8030 and AT8035 model + +config AMD_PHY + tristate "Drivers for the AMD PHYs" + ---help--- + Currently supports the am79c874 + +config AMD_XGBE_PHY + tristate "Driver for the AMD 10GbE (amd-xgbe) PHYs" + depends on OF + ---help--- + Currently supports the AMD 10GbE PHY + config MARVELL_PHY tristate "Drivers for Marvell PHYs" ---help--- @@ -58,9 +73,21 @@ config BROADCOM_PHY config BCM63XX_PHY tristate "Drivers for Broadcom 63xx SOCs internal PHY" + depends on BCM63XX ---help--- Currently supports the 6348 and 6358 PHYs. +config BCM7XXX_PHY + tristate "Drivers for Broadcom 7xxx SOCs internal PHYs" + ---help--- + Currently supports the BCM7366, BCM7439, BCM7445, and + 40nm and 65nm generation of BCM7xxx Set Top Box SoCs. + +config BCM87XX_PHY + tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs" + help + Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs. + config ICPLUS_PHY tristate "Drivers for ICPlus PHYs" ---help--- @@ -111,7 +138,7 @@ config MDIO_BITBANG config MDIO_GPIO tristate "Support for GPIO lib-based bitbanged MDIO buses" - depends on MDIO_BITBANG && GENERIC_GPIO + depends on MDIO_BITBANG && GPIOLIB ---help--- Supports GPIO lib-based MDIO busses. @@ -120,7 +147,7 @@ config MDIO_GPIO config MDIO_OCTEON tristate "Support for MDIO buses on Octeon SOCs" - depends on CPU_CAVIUM_OCTEON + depends on CAVIUM_OCTEON_SOC default y help @@ -129,4 +156,57 @@ config MDIO_OCTEON If in doubt, say Y. +config MDIO_SUN4I + tristate "Allwinner sun4i MDIO interface support" + depends on ARCH_SUNXI + select REGULATOR + select REGULATOR_FIXED_VOLTAGE + help + This driver supports the MDIO interface found in the network + interface units of the Allwinner SoC that have an EMAC (A10, + A12, A10s, etc.) + +config MDIO_MOXART + tristate "MOXA ART MDIO interface support" + depends on ARCH_MOXART + help + This driver supports the MDIO interface found in the network + interface units of the MOXA ART SoC + +config MDIO_BUS_MUX + tristate + depends on OF_MDIO + help + This module provides a driver framework for MDIO bus + multiplexers which connect one of several child MDIO busses + to a parent bus. Switching between child busses is done by + device specific drivers. + +config MDIO_BUS_MUX_GPIO + tristate "Support for GPIO controlled MDIO bus multiplexers" + depends on OF_GPIO && OF_MDIO + select MDIO_BUS_MUX + help + This module provides a driver for MDIO bus multiplexers that + are controlled via GPIO lines. The multiplexer connects one of + several child MDIO busses to a parent bus. Child bus + selection is under the control of GPIO lines. + +config MDIO_BUS_MUX_MMIOREG + tristate "Support for MMIO device-controlled MDIO bus multiplexers" + depends on OF_MDIO + select MDIO_BUS_MUX + help + This module provides a driver for MDIO bus multiplexers that + are controlled via a simple memory-mapped device, like an FPGA. + The multiplexer connects one of several child MDIO busses to a + parent bus. Child bus selection is under the control of one of + the FPGA's registers. + + Currently, only 8-bit registers are supported. + endif # PHYLIB + +config MICREL_KS8995MA + tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch" + depends on SPI |