diff options
Diffstat (limited to 'drivers/net/ni52.h')
| -rw-r--r-- | drivers/net/ni52.h | 310 |
1 files changed, 0 insertions, 310 deletions
diff --git a/drivers/net/ni52.h b/drivers/net/ni52.h deleted file mode 100644 index 0a03b288332..00000000000 --- a/drivers/net/ni52.h +++ /dev/null @@ -1,310 +0,0 @@ -/* - * Intel i82586 Ethernet definitions - * - * This is an extension to the Linux operating system, and is covered by the - * same GNU General Public License that covers that work. - * - * copyrights (c) 1994 by Michael Hipp (hippm@informatik.uni-tuebingen.de) - * - * I have done a look in the following sources: - * crynwr-packet-driver by Russ Nelson - * Garret A. Wollman's i82586-driver for BSD - */ - - -#define NI52_RESET 0 /* writing to this address, resets the i82586 */ -#define NI52_ATTENTION 1 /* channel attention, kick the 586 */ -#define NI52_TENA 3 /* 2-5 possibly wrong, Xmit enable */ -#define NI52_TDIS 2 /* Xmit disable */ -#define NI52_INTENA 5 /* Interrupt enable */ -#define NI52_INTDIS 4 /* Interrupt disable */ -#define NI52_MAGIC1 6 /* dunno exact function */ -#define NI52_MAGIC2 7 /* dunno exact function */ - -#define NI52_MAGICVAL1 0x00 /* magic-values for ni5210 card */ -#define NI52_MAGICVAL2 0x55 - -/* - * where to find the System Configuration Pointer (SCP) - */ -#define SCP_DEFAULT_ADDRESS 0xfffff4 - - -/* - * System Configuration Pointer Struct - */ - -struct scp_struct -{ - u16 zero_dum0; /* has to be zero */ - u8 sysbus; /* 0=16Bit,1=8Bit */ - u8 zero_dum1; /* has to be zero for 586 */ - u16 zero_dum2; - u16 zero_dum3; - u32 iscp; /* pointer to the iscp-block */ -}; - - -/* - * Intermediate System Configuration Pointer (ISCP) - */ -struct iscp_struct -{ - u8 busy; /* 586 clears after successful init */ - u8 zero_dummy; /* has to be zero */ - u16 scb_offset; /* pointeroffset to the scb_base */ - u32 scb_base; /* base-address of all 16-bit offsets */ -}; - -/* - * System Control Block (SCB) - */ -struct scb_struct -{ - u8 rus; - u8 cus; - u8 cmd_ruc; /* command word: RU part */ - u8 cmd_cuc; /* command word: CU part & ACK */ - u16 cbl_offset; /* pointeroffset, command block list */ - u16 rfa_offset; /* pointeroffset, receive frame area */ - u16 crc_errs; /* CRC-Error counter */ - u16 aln_errs; /* alignmenterror counter */ - u16 rsc_errs; /* Resourceerror counter */ - u16 ovrn_errs; /* OVerrunerror counter */ -}; - -/* - * possible command values for the command word - */ -#define RUC_MASK 0x0070 /* mask for RU commands */ -#define RUC_NOP 0x0000 /* NOP-command */ -#define RUC_START 0x0010 /* start RU */ -#define RUC_RESUME 0x0020 /* resume RU after suspend */ -#define RUC_SUSPEND 0x0030 /* suspend RU */ -#define RUC_ABORT 0x0040 /* abort receiver operation immediately */ - -#define CUC_MASK 0x07 /* mask for CU command */ -#define CUC_NOP 0x00 /* NOP-command */ -#define CUC_START 0x01 /* start execution of 1. cmd on the CBL */ -#define CUC_RESUME 0x02 /* resume after suspend */ -#define CUC_SUSPEND 0x03 /* Suspend CU */ -#define CUC_ABORT 0x04 /* abort command operation immediately */ - -#define ACK_MASK 0xf0 /* mask for ACK command */ -#define ACK_CX 0x80 /* acknowledges STAT_CX */ -#define ACK_FR 0x40 /* ack. STAT_FR */ -#define ACK_CNA 0x20 /* ack. STAT_CNA */ -#define ACK_RNR 0x10 /* ack. STAT_RNR */ - -/* - * possible status values for the status word - */ -#define STAT_MASK 0xf0 /* mask for cause of interrupt */ -#define STAT_CX 0x80 /* CU finished cmd with its I bit set */ -#define STAT_FR 0x40 /* RU finished receiving a frame */ -#define STAT_CNA 0x20 /* CU left active state */ -#define STAT_RNR 0x10 /* RU left ready state */ - -#define CU_STATUS 0x7 /* CU status, 0=idle */ -#define CU_SUSPEND 0x1 /* CU is suspended */ -#define CU_ACTIVE 0x2 /* CU is active */ - -#define RU_STATUS 0x70 /* RU status, 0=idle */ -#define RU_SUSPEND 0x10 /* RU suspended */ -#define RU_NOSPACE 0x20 /* RU no resources */ -#define RU_READY 0x40 /* RU is ready */ - -/* - * Receive Frame Descriptor (RFD) - */ -struct rfd_struct -{ - u8 stat_low; /* status word */ - u8 stat_high; /* status word */ - u8 rfd_sf; /* 82596 mode only */ - u8 last; /* Bit15,Last Frame on List / Bit14,suspend */ - u16 next; /* linkoffset to next RFD */ - u16 rbd_offset; /* pointeroffset to RBD-buffer */ - u8 dest[6]; /* ethernet-address, destination */ - u8 source[6]; /* ethernet-address, source */ - u16 length; /* 802.3 frame-length */ - u16 zero_dummy; /* dummy */ -}; - -#define RFD_LAST 0x80 /* last: last rfd in the list */ -#define RFD_SUSP 0x40 /* last: suspend RU after */ -#define RFD_COMPL 0x80 -#define RFD_OK 0x20 -#define RFD_BUSY 0x40 -#define RFD_ERR_LEN 0x10 /* Length error (if enabled length-checking */ -#define RFD_ERR_CRC 0x08 /* CRC error */ -#define RFD_ERR_ALGN 0x04 /* Alignment error */ -#define RFD_ERR_RNR 0x02 /* status: receiver out of resources */ -#define RFD_ERR_OVR 0x01 /* DMA Overrun! */ - -#define RFD_ERR_FTS 0x0080 /* Frame to short */ -#define RFD_ERR_NEOP 0x0040 /* No EOP flag (for bitstuffing only) */ -#define RFD_ERR_TRUN 0x0020 /* (82596 only/SF mode) indicates truncated frame */ -#define RFD_MATCHADD 0x0002 /* status: Destinationaddress !matches IA (only 82596) */ -#define RFD_COLLDET 0x0001 /* Detected collision during reception */ - -/* - * Receive Buffer Descriptor (RBD) - */ -struct rbd_struct -{ - u16 status; /* status word,number of used bytes in buff */ - u16 next; /* pointeroffset to next RBD */ - u32 buffer; /* receive buffer address pointer */ - u16 size; /* size of this buffer */ - u16 zero_dummy; /* dummy */ -}; - -#define RBD_LAST 0x8000 /* last buffer */ -#define RBD_USED 0x4000 /* this buffer has data */ -#define RBD_MASK 0x3fff /* size-mask for length */ - -/* - * Statusvalues for Commands/RFD - */ -#define STAT_COMPL 0x8000 /* status: frame/command is complete */ -#define STAT_BUSY 0x4000 /* status: frame/command is busy */ -#define STAT_OK 0x2000 /* status: frame/command is ok */ - -/* - * Action-Commands - */ -#define CMD_NOP 0x0000 /* NOP */ -#define CMD_IASETUP 0x0001 /* initial address setup command */ -#define CMD_CONFIGURE 0x0002 /* configure command */ -#define CMD_MCSETUP 0x0003 /* MC setup command */ -#define CMD_XMIT 0x0004 /* transmit command */ -#define CMD_TDR 0x0005 /* time domain reflectometer (TDR) command */ -#define CMD_DUMP 0x0006 /* dump command */ -#define CMD_DIAGNOSE 0x0007 /* diagnose command */ - -/* - * Action command bits - */ -#define CMD_LAST 0x8000 /* indicates last command in the CBL */ -#define CMD_SUSPEND 0x4000 /* suspend CU after this CB */ -#define CMD_INT 0x2000 /* generate interrupt after execution */ - -/* - * NOP - command - */ -struct nop_cmd_struct -{ - u16 cmd_status; /* status of this command */ - u16 cmd_cmd; /* the command itself (+bits) */ - u16 cmd_link; /* offsetpointer to next command */ -}; - -/* - * IA Setup command - */ -struct iasetup_cmd_struct -{ - u16 cmd_status; - u16 cmd_cmd; - u16 cmd_link; - u8 iaddr[6]; -}; - -/* - * Configure command - */ -struct configure_cmd_struct -{ - u16 cmd_status; - u16 cmd_cmd; - u16 cmd_link; - u8 byte_cnt; /* size of the config-cmd */ - u8 fifo; /* fifo/recv monitor */ - u8 sav_bf; /* save bad frames (bit7=1)*/ - u8 adr_len; /* adr_len(0-2),al_loc(3),pream(4-5),loopbak(6-7)*/ - u8 priority; /* lin_prio(0-2),exp_prio(4-6),bof_metd(7) */ - u8 ifs; /* inter frame spacing */ - u8 time_low; /* slot time low */ - u8 time_high; /* slot time high(0-2) and max. retries(4-7) */ - u8 promisc; /* promisc-mode(0) , et al (1-7) */ - u8 carr_coll; /* carrier(0-3)/collision(4-7) stuff */ - u8 fram_len; /* minimal frame len */ - u8 dummy; /* dummy */ -}; - -/* - * Multicast Setup command - */ -struct mcsetup_cmd_struct -{ - u16 cmd_status; - u16 cmd_cmd; - u16 cmd_link; - u16 mc_cnt; /* number of bytes in the MC-List */ - u8 mc_list[0][6]; /* pointer to 6 bytes entries */ -}; - -/* - * DUMP command - */ -struct dump_cmd_struct -{ - u16 cmd_status; - u16 cmd_cmd; - u16 cmd_link; - u16 dump_offset; /* pointeroffset to DUMP space */ -}; - -/* - * transmit command - */ -struct transmit_cmd_struct -{ - u16 cmd_status; - u16 cmd_cmd; - u16 cmd_link; - u16 tbd_offset; /* pointeroffset to TBD */ - u8 dest[6]; /* destination address of the frame */ - u16 length; /* user defined: 802.3 length / Ether type */ -}; - -#define TCMD_ERRMASK 0x0fa0 -#define TCMD_MAXCOLLMASK 0x000f -#define TCMD_MAXCOLL 0x0020 -#define TCMD_HEARTBEAT 0x0040 -#define TCMD_DEFERRED 0x0080 -#define TCMD_UNDERRUN 0x0100 -#define TCMD_LOSTCTS 0x0200 -#define TCMD_NOCARRIER 0x0400 -#define TCMD_LATECOLL 0x0800 - -struct tdr_cmd_struct -{ - u16 cmd_status; - u16 cmd_cmd; - u16 cmd_link; - u16 status; -}; - -#define TDR_LNK_OK 0x8000 /* No link problem identified */ -#define TDR_XCVR_PRB 0x4000 /* indicates a transceiver problem */ -#define TDR_ET_OPN 0x2000 /* open, no correct termination */ -#define TDR_ET_SRT 0x1000 /* TDR detected a short circuit */ -#define TDR_TIMEMASK 0x07ff /* mask for the time field */ - -/* - * Transmit Buffer Descriptor (TBD) - */ -struct tbd_struct -{ - u16 size; /* size + EOF-Flag(15) */ - u16 next; /* pointeroffset to next TBD */ - u32 buffer; /* pointer to buffer */ -}; - -#define TBD_LAST 0x8000 /* EOF-Flag, indicates last buffer in list */ - - - - |