diff options
Diffstat (limited to 'drivers/net/myri10ge/myri10ge_mcp.h')
| -rw-r--r-- | drivers/net/myri10ge/myri10ge_mcp.h | 242 |
1 files changed, 0 insertions, 242 deletions
diff --git a/drivers/net/myri10ge/myri10ge_mcp.h b/drivers/net/myri10ge/myri10ge_mcp.h deleted file mode 100644 index 9519ae7cd5e..00000000000 --- a/drivers/net/myri10ge/myri10ge_mcp.h +++ /dev/null @@ -1,242 +0,0 @@ -#ifndef __MYRI10GE_MCP_H__ -#define __MYRI10GE_MCP_H__ - -#define MXGEFW_VERSION_MAJOR 1 -#define MXGEFW_VERSION_MINOR 4 - -/* 8 Bytes */ -struct mcp_dma_addr { - u32 high; - u32 low; -}; - -/* 4 Bytes */ -struct mcp_slot { - u16 checksum; - u16 length; -}; - -/* 64 Bytes */ -struct mcp_cmd { - u32 cmd; - u32 data0; /* will be low portion if data > 32 bits */ - /* 8 */ - u32 data1; /* will be high portion if data > 32 bits */ - u32 data2; /* currently unused.. */ - /* 16 */ - struct mcp_dma_addr response_addr; - /* 24 */ - u8 pad[40]; -}; - -/* 8 Bytes */ -struct mcp_cmd_response { - u32 data; - u32 result; -}; - -/* - * flags used in mcp_kreq_ether_send_t: - * - * The SMALL flag is only needed in the first segment. It is raised - * for packets that are total less or equal 512 bytes. - * - * The CKSUM flag must be set in all segments. - * - * The PADDED flags is set if the packet needs to be padded, and it - * must be set for all segments. - * - * The MXGEFW_FLAGS_ALIGN_ODD must be set if the cumulative - * length of all previous segments was odd. - */ - -#define MXGEFW_FLAGS_SMALL 0x1 -#define MXGEFW_FLAGS_TSO_HDR 0x1 -#define MXGEFW_FLAGS_FIRST 0x2 -#define MXGEFW_FLAGS_ALIGN_ODD 0x4 -#define MXGEFW_FLAGS_CKSUM 0x8 -#define MXGEFW_FLAGS_TSO_LAST 0x8 -#define MXGEFW_FLAGS_NO_TSO 0x10 -#define MXGEFW_FLAGS_TSO_CHOP 0x10 -#define MXGEFW_FLAGS_TSO_PLD 0x20 - -#define MXGEFW_SEND_SMALL_SIZE 1520 -#define MXGEFW_MAX_MTU 9400 - -union mcp_pso_or_cumlen { - u16 pseudo_hdr_offset; - u16 cum_len; -}; - -#define MXGEFW_MAX_SEND_DESC 12 -#define MXGEFW_PAD 2 - -/* 16 Bytes */ -struct mcp_kreq_ether_send { - u32 addr_high; - u32 addr_low; - u16 pseudo_hdr_offset; - u16 length; - u8 pad; - u8 rdma_count; - u8 cksum_offset; /* where to start computing cksum */ - u8 flags; /* as defined above */ -}; - -/* 8 Bytes */ -struct mcp_kreq_ether_recv { - u32 addr_high; - u32 addr_low; -}; - -/* Commands */ - -#define MXGEFW_BOOT_HANDOFF 0xfc0000 -#define MXGEFW_BOOT_DUMMY_RDMA 0xfc01c0 - -#define MXGEFW_ETH_CMD 0xf80000 -#define MXGEFW_ETH_SEND_4 0x200000 -#define MXGEFW_ETH_SEND_1 0x240000 -#define MXGEFW_ETH_SEND_2 0x280000 -#define MXGEFW_ETH_SEND_3 0x2c0000 -#define MXGEFW_ETH_RECV_SMALL 0x300000 -#define MXGEFW_ETH_RECV_BIG 0x340000 - -#define MXGEFW_ETH_SEND(n) (0x200000 + (((n) & 0x03) * 0x40000)) -#define MXGEFW_ETH_SEND_OFFSET(n) (MXGEFW_ETH_SEND(n) - MXGEFW_ETH_SEND_4) - -enum myri10ge_mcp_cmd_type { - MXGEFW_CMD_NONE = 0, - /* Reset the mcp, it is left in a safe state, waiting - * for the driver to set all its parameters */ - MXGEFW_CMD_RESET, - - /* get the version number of the current firmware.. - * (may be available in the eeprom strings..? */ - MXGEFW_GET_MCP_VERSION, - - /* Parameters which must be set by the driver before it can - * issue MXGEFW_CMD_ETHERNET_UP. They persist until the next - * MXGEFW_CMD_RESET is issued */ - - MXGEFW_CMD_SET_INTRQ_DMA, - MXGEFW_CMD_SET_BIG_BUFFER_SIZE, /* in bytes, power of 2 */ - MXGEFW_CMD_SET_SMALL_BUFFER_SIZE, /* in bytes */ - - /* Parameters which refer to lanai SRAM addresses where the - * driver must issue PIO writes for various things */ - - MXGEFW_CMD_GET_SEND_OFFSET, - MXGEFW_CMD_GET_SMALL_RX_OFFSET, - MXGEFW_CMD_GET_BIG_RX_OFFSET, - MXGEFW_CMD_GET_IRQ_ACK_OFFSET, - MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET, - - /* Parameters which refer to rings stored on the MCP, - * and whose size is controlled by the mcp */ - - MXGEFW_CMD_GET_SEND_RING_SIZE, /* in bytes */ - MXGEFW_CMD_GET_RX_RING_SIZE, /* in bytes */ - - /* Parameters which refer to rings stored in the host, - * and whose size is controlled by the host. Note that - * all must be physically contiguous and must contain - * a power of 2 number of entries. */ - - MXGEFW_CMD_SET_INTRQ_SIZE, /* in bytes */ - - /* command to bring ethernet interface up. Above parameters - * (plus mtu & mac address) must have been exchanged prior - * to issuing this command */ - MXGEFW_CMD_ETHERNET_UP, - - /* command to bring ethernet interface down. No further sends - * or receives may be processed until an MXGEFW_CMD_ETHERNET_UP - * is issued, and all interrupt queues must be flushed prior - * to ack'ing this command */ - - MXGEFW_CMD_ETHERNET_DOWN, - - /* commands the driver may issue live, without resetting - * the nic. Note that increasing the mtu "live" should - * only be done if the driver has already supplied buffers - * sufficiently large to handle the new mtu. Decreasing - * the mtu live is safe */ - - MXGEFW_CMD_SET_MTU, - MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET, /* in microseconds */ - MXGEFW_CMD_SET_STATS_INTERVAL, /* in microseconds */ - MXGEFW_CMD_SET_STATS_DMA_OBSOLETE, /* replaced by SET_STATS_DMA_V2 */ - - MXGEFW_ENABLE_PROMISC, - MXGEFW_DISABLE_PROMISC, - MXGEFW_SET_MAC_ADDRESS, - - MXGEFW_ENABLE_FLOW_CONTROL, - MXGEFW_DISABLE_FLOW_CONTROL, - - /* do a DMA test - * data0,data1 = DMA address - * data2 = RDMA length (MSH), WDMA length (LSH) - * command return data = repetitions (MSH), 0.5-ms ticks (LSH) - */ - MXGEFW_DMA_TEST, - - MXGEFW_ENABLE_ALLMULTI, - MXGEFW_DISABLE_ALLMULTI, - - /* returns MXGEFW_CMD_ERROR_MULTICAST - * if there is no room in the cache - * data0,MSH(data1) = multicast group address */ - MXGEFW_JOIN_MULTICAST_GROUP, - /* returns MXGEFW_CMD_ERROR_MULTICAST - * if the address is not in the cache, - * or is equal to FF-FF-FF-FF-FF-FF - * data0,MSH(data1) = multicast group address */ - MXGEFW_LEAVE_MULTICAST_GROUP, - MXGEFW_LEAVE_ALL_MULTICAST_GROUPS, - - MXGEFW_CMD_SET_STATS_DMA_V2, - /* data0, data1 = bus addr, - * data2 = sizeof(struct mcp_irq_data) from driver point of view, allows - * adding new stuff to mcp_irq_data without changing the ABI */ -}; - -enum myri10ge_mcp_cmd_status { - MXGEFW_CMD_OK = 0, - MXGEFW_CMD_UNKNOWN, - MXGEFW_CMD_ERROR_RANGE, - MXGEFW_CMD_ERROR_BUSY, - MXGEFW_CMD_ERROR_EMPTY, - MXGEFW_CMD_ERROR_CLOSED, - MXGEFW_CMD_ERROR_HASH_ERROR, - MXGEFW_CMD_ERROR_BAD_PORT, - MXGEFW_CMD_ERROR_RESOURCES, - MXGEFW_CMD_ERROR_MULTICAST -}; - -#define MXGEFW_OLD_IRQ_DATA_LEN 40 - -struct mcp_irq_data { - /* add new counters at the beginning */ - u32 future_use[5]; - u32 dropped_multicast_filtered; - /* 40 Bytes */ - u32 send_done_count; - - u32 link_up; - u32 dropped_link_overflow; - u32 dropped_link_error_or_filtered; - u32 dropped_runt; - u32 dropped_overrun; - u32 dropped_no_small_buffer; - u32 dropped_no_big_buffer; - u32 rdma_tags_available; - - u8 tx_stopped; - u8 link_down; - u8 stats_updated; - u8 valid; -}; - -#endif /* __MYRI10GE_MCP_H__ */ |