diff options
Diffstat (limited to 'drivers/net/mipsnet.h')
| -rw-r--r-- | drivers/net/mipsnet.h | 127 |
1 files changed, 0 insertions, 127 deletions
diff --git a/drivers/net/mipsnet.h b/drivers/net/mipsnet.h deleted file mode 100644 index 878535953cb..00000000000 --- a/drivers/net/mipsnet.h +++ /dev/null @@ -1,127 +0,0 @@ -// -// <COPYRIGHT CLASS="1B" YEAR="2005"> -// Unpublished work (c) MIPS Technologies, Inc. All rights reserved. -// Unpublished rights reserved under the copyright laws of the U.S.A. and -// other countries. -// -// PROPRIETARY / SECRET CONFIDENTIAL INFORMATION OF MIPS TECHNOLOGIES, INC. -// FOR INTERNAL USE ONLY. -// -// Under no circumstances (contract or otherwise) may this information be -// disclosed to, or copied, modified or used by anyone other than employees -// or contractors of MIPS Technologies having a need to know. -// </COPYRIGHT> -// -//++ -// File: MIPS_Net.h -// -// Description: -// The definition of the emulated MIPSNET device's interface. -// -// Notes: This include file needs to work from a Linux device drivers. -// -//-- -// - -#ifndef __MIPSNET_H -#define __MIPSNET_H - -/* - * Id of this Net device, as seen by the core. - */ -#define MIPS_NET_DEV_ID ((uint64_t) \ - ((uint64_t)'M'<< 0)| \ - ((uint64_t)'I'<< 8)| \ - ((uint64_t)'P'<<16)| \ - ((uint64_t)'S'<<24)| \ - ((uint64_t)'N'<<32)| \ - ((uint64_t)'E'<<40)| \ - ((uint64_t)'T'<<48)| \ - ((uint64_t)'0'<<56)) - -/* - * Net status/control block as seen by sw in the core. - * (Why not use bit fields? can't be bothered with cross-platform struct - * packing.) - */ -typedef struct _net_control_block { - /// dev info for probing - /// reads as MIPSNET%d where %d is some form of version - uint64_t devId; /*0x00 */ - - /* - * read only busy flag. - * Set and cleared by the Net Device to indicate that an rx or a tx - * is in progress. - */ - uint32_t busy; /*0x08 */ - - /* - * Set by the Net Device. - * The device will set it once data has been received. - * The value is the number of bytes that should be read from - * rxDataBuffer. The value will decrease till 0 until all the data - * from rxDataBuffer has been read. - */ - uint32_t rxDataCount; /*0x0c */ -#define MIPSNET_MAX_RXTX_DATACOUNT (1<<16) - - /* - * Settable from the MIPS core, cleared by the Net Device. - * The core should set the number of bytes it wants to send, - * then it should write those bytes of data to txDataBuffer. - * The device will clear txDataCount has been processed (not necessarily sent). - */ - uint32_t txDataCount; /*0x10 */ - - /* - * Interrupt control - * - * Used to clear the interrupted generated by this dev. - * Write a 1 to clear the interrupt. (except bit31). - * - * Bit0 is set if it was a tx-done interrupt. - * Bit1 is set when new rx-data is available. - * Until this bit is cleared there will be no other RXs. - * - * Bit31 is used for testing, it clears after a read. - * Writing 1 to this bit will cause an interrupt to be generated. - * To clear the test interrupt, write 0 to this register. - */ - uint32_t interruptControl; /*0x14 */ -#define MIPSNET_INTCTL_TXDONE ((uint32_t)(1<< 0)) -#define MIPSNET_INTCTL_RXDONE ((uint32_t)(1<< 1)) -#define MIPSNET_INTCTL_TESTBIT ((uint32_t)(1<<31)) -#define MIPSNET_INTCTL_ALLSOURCES (MIPSNET_INTCTL_TXDONE|MIPSNET_INTCTL_RXDONE|MIPSNET_INTCTL_TESTBIT) - - /* - * Readonly core-specific interrupt info for the device to signal the core. - * The meaning of the contents of this field might change. - */ - /*###\todo: the whole memIntf interrupt scheme is messy: the device should have - * no control what so ever of what VPE/register set is being used. - * The MemIntf should only expose interrupt lines, and something in the - * config should be responsible for the line<->core/vpe bindings. - */ - uint32_t interruptInfo; /*0x18 */ - - /* - * This is where the received data is read out. - * There is more data to read until rxDataReady is 0. - * Only 1 byte at this regs offset is used. - */ - uint32_t rxDataBuffer; /*0x1c */ - - /* - * This is where the data to transmit is written. - * Data should be written for the amount specified in the txDataCount register. - * Only 1 byte at this regs offset is used. - */ - uint32_t txDataBuffer; /*0x20 */ -} MIPS_T_NetControl; - -#define MIPSNET_IO_EXTENT 0x40 /* being generous */ - -#define field_offset(field) ((int)&((MIPS_T_NetControl*)(0))->field) - -#endif /* __MIPSNET_H */ |