diff options
Diffstat (limited to 'drivers/net/ixp2000/ixp2400_tx.uc')
| -rw-r--r-- | drivers/net/ixp2000/ixp2400_tx.uc | 272 |
1 files changed, 0 insertions, 272 deletions
diff --git a/drivers/net/ixp2000/ixp2400_tx.uc b/drivers/net/ixp2000/ixp2400_tx.uc deleted file mode 100644 index d090d1884fb..00000000000 --- a/drivers/net/ixp2000/ixp2400_tx.uc +++ /dev/null @@ -1,272 +0,0 @@ -/* - * TX ucode for the Intel IXP2400 in POS-PHY mode. - * Copyright (C) 2004, 2005 Lennert Buytenhek - * Dedicated to Marija Kulikova. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * Assumptions made in this code: - * - The IXP2400 MSF is configured for POS-PHY mode, in a mode where - * only one TBUF partition is used. This includes, for example, - * 1x32 SPHY and 1x32 MPHY32, but not 4x8 SPHY or 1x32 MPHY4. (This - * is not an exhaustive list.) - * - The TBUF uses 64-byte mpackets. - * - TX descriptors reside in SRAM, and have the following format: - * struct tx_desc - * { - * // to uengine - * u32 buf_phys_addr; - * u32 pkt_length; - * u32 channel; - * }; - * - Packet data resides in DRAM. - * - Packet buffer addresses are 8-byte aligned. - * - Scratch ring 2 is tx_pending. - * - Scratch ring 3 is tx_done, and has status condition 'full'. - * - This code is run on all eight threads of the microengine it runs on. - */ - -#define TX_SEQUENCE_0 0x0060 -#define TBUF_CTRL 0x1800 - -#define PARTITION_SIZE 128 -#define PARTITION_THRESH 96 - - - .sig volatile sig1 - .sig volatile sig2 - .sig volatile sig3 - - .reg @old_tx_seq_0 - .reg @mpkts_in_flight - .reg @next_tbuf_mpacket - - .reg @buffer_handle - .reg @buffer_start - .reg @packet_length - .reg @channel - .reg @packet_offset - - .reg zero - - immed[zero, 0] - - /* - * Skip context 0 initialisation? - */ - .begin - br!=ctx[0, mpacket_tx_loop#] - .end - - /* - * Wait until all pending TBUF elements have been transmitted. - */ - .begin - .reg read $tx - .sig zzz - - loop_empty#: - msf[read, $tx, zero, TX_SEQUENCE_0, 1], ctx_swap[zzz] - alu_shf[--, --, b, $tx, >>31] - beq[loop_empty#] - - alu[@old_tx_seq_0, --, b, $tx] - .end - - immed[@mpkts_in_flight, 0] - alu[@next_tbuf_mpacket, @old_tx_seq_0, and, (PARTITION_SIZE - 1)] - - immed[@buffer_handle, 0] - - /* - * Initialise signal pipeline. - */ - .begin - local_csr_wr[SAME_ME_SIGNAL, (&sig1 << 3)] - .set_sig sig1 - - local_csr_wr[SAME_ME_SIGNAL, (&sig2 << 3)] - .set_sig sig2 - - local_csr_wr[SAME_ME_SIGNAL, (&sig3 << 3)] - .set_sig sig3 - .end - -mpacket_tx_loop#: - .begin - .reg tbuf_element_index - .reg buffer_handle - .reg sop_eop - .reg packet_data - .reg channel - .reg mpacket_size - - /* - * If there is no packet currently being transmitted, - * dequeue the next TX descriptor, and fetch the buffer - * address, packet length and destination channel number. - */ - .begin - .reg read $stemp $stemp2 $stemp3 - .xfer_order $stemp $stemp2 $stemp3 - .sig zzz - - ctx_arb[sig1] - - alu[--, --, b, @buffer_handle] - bne[already_got_packet#] - - tx_nobufs#: - scratch[get, $stemp, zero, 8, 1], ctx_swap[zzz] - alu[@buffer_handle, --, b, $stemp] - beq[tx_nobufs#] - - sram[read, $stemp, $stemp, 0, 3], ctx_swap[zzz] - alu[@buffer_start, --, b, $stemp] - alu[@packet_length, --, b, $stemp2] - beq[zero_byte_packet#] - alu[@channel, --, b, $stemp3] - immed[@packet_offset, 0] - - already_got_packet#: - local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig1 << 3))] - .end - - /* - * Determine tbuf element index, SOP/EOP flags, mpacket - * offset and mpacket size and cache buffer_handle and - * channel number. - */ - .begin - alu[tbuf_element_index, --, b, @next_tbuf_mpacket] - alu[@next_tbuf_mpacket, @next_tbuf_mpacket, +, 1] - alu[@next_tbuf_mpacket, @next_tbuf_mpacket, and, - (PARTITION_SIZE - 1)] - - alu[buffer_handle, --, b, @buffer_handle] - immed[@buffer_handle, 0] - - immed[sop_eop, 1] - - alu[packet_data, --, b, @packet_offset] - bne[no_sop#] - alu[sop_eop, sop_eop, or, 2] - no_sop#: - alu[packet_data, packet_data, +, @buffer_start] - - alu[channel, --, b, @channel] - - alu[mpacket_size, @packet_length, -, @packet_offset] - alu[--, 64, -, mpacket_size] - bhs[eop#] - alu[@buffer_handle, --, b, buffer_handle] - immed[mpacket_size, 64] - alu[sop_eop, sop_eop, and, 2] - eop#: - - alu[@packet_offset, @packet_offset, +, mpacket_size] - .end - - /* - * Wait until there's enough space in the TBUF. - */ - .begin - .reg read $tx - .reg temp - .sig zzz - - ctx_arb[sig2] - - br[test_space#] - - loop_space#: - msf[read, $tx, zero, TX_SEQUENCE_0, 1], ctx_swap[zzz] - - alu[temp, $tx, -, @old_tx_seq_0] - alu[temp, temp, and, 0xff] - alu[@mpkts_in_flight, @mpkts_in_flight, -, temp] - - alu[@old_tx_seq_0, --, b, $tx] - - test_space#: - alu[--, PARTITION_THRESH, -, @mpkts_in_flight] - blo[loop_space#] - - alu[@mpkts_in_flight, @mpkts_in_flight, +, 1] - - local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig2 << 3))] - .end - - /* - * Copy the packet data to the TBUF. - */ - .begin - .reg temp - .sig copy_sig - - alu[temp, mpacket_size, -, 1] - alu_shf[temp, 0x10, or, temp, >>3] - alu_shf[temp, 0x10, or, temp, <<21] - alu_shf[temp, temp, or, tbuf_element_index, <<11] - alu_shf[--, temp, or, 1, <<18] - - dram[tbuf_wr, --, packet_data, 0, max_8], - indirect_ref, sig_done[copy_sig] - ctx_arb[copy_sig] - .end - - /* - * Mark TBUF element as ready-to-be-transmitted. - */ - .begin - .reg write $tsw $tsw2 - .xfer_order $tsw $tsw2 - .reg temp - .sig zzz - - alu_shf[temp, channel, or, mpacket_size, <<24] - alu_shf[$tsw, temp, or, sop_eop, <<8] - immed[$tsw2, 0] - - immed[temp, TBUF_CTRL] - alu_shf[temp, temp, or, tbuf_element_index, <<3] - msf[write, $tsw, temp, 0, 2], ctx_swap[zzz] - .end - - /* - * Resynchronise. - */ - .begin - ctx_arb[sig3] - local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig3 << 3))] - .end - - /* - * If this was an EOP mpacket, recycle the TX buffer - * and signal the host. - */ - .begin - .reg write $stemp - .sig zzz - - alu[--, sop_eop, and, 1] - beq[mpacket_tx_loop#] - - tx_done_ring_full#: - br_inp_state[SCR_Ring3_Status, tx_done_ring_full#] - - alu[$stemp, --, b, buffer_handle] - scratch[put, $stemp, zero, 12, 1], ctx_swap[zzz] - cap[fast_wr, 0, XSCALE_INT_A] - br[mpacket_tx_loop#] - .end - .end - - -zero_byte_packet#: - halt - - |