aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ixgbe/ixgbe_phy.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ixgbe/ixgbe_phy.c')
-rw-r--r--drivers/net/ixgbe/ixgbe_phy.c428
1 files changed, 0 insertions, 428 deletions
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
deleted file mode 100644
index 764035a8c9a..00000000000
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ /dev/null
@@ -1,428 +0,0 @@
-/*******************************************************************************
-
- Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2008 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-
-#include "ixgbe_common.h"
-#include "ixgbe_phy.h"
-
-static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr);
-static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id);
-static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw);
-
-/**
- * ixgbe_identify_phy_generic - Get physical layer module
- * @hw: pointer to hardware structure
- *
- * Determines the physical layer module found on the current adapter.
- **/
-s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
-{
- s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
- u32 phy_addr;
-
- if (hw->phy.type == ixgbe_phy_unknown) {
- for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
- if (ixgbe_validate_phy_addr(hw, phy_addr)) {
- hw->phy.addr = phy_addr;
- ixgbe_get_phy_id(hw);
- hw->phy.type =
- ixgbe_get_phy_type_from_id(hw->phy.id);
- status = 0;
- break;
- }
- }
- } else {
- status = 0;
- }
-
- return status;
-}
-
-/**
- * ixgbe_validate_phy_addr - Determines phy address is valid
- * @hw: pointer to hardware structure
- *
- **/
-static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr)
-{
- u16 phy_id = 0;
- bool valid = false;
-
- hw->phy.addr = phy_addr;
- hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH,
- IXGBE_MDIO_PMA_PMD_DEV_TYPE, &phy_id);
-
- if (phy_id != 0xFFFF && phy_id != 0x0)
- valid = true;
-
- return valid;
-}
-
-/**
- * ixgbe_get_phy_id - Get the phy type
- * @hw: pointer to hardware structure
- *
- **/
-static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw)
-{
- u32 status;
- u16 phy_id_high = 0;
- u16 phy_id_low = 0;
-
- status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH,
- IXGBE_MDIO_PMA_PMD_DEV_TYPE,
- &phy_id_high);
-
- if (status == 0) {
- hw->phy.id = (u32)(phy_id_high << 16);
- status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_LOW,
- IXGBE_MDIO_PMA_PMD_DEV_TYPE,
- &phy_id_low);
- hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK);
- hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK);
- }
- return status;
-}
-
-/**
- * ixgbe_get_phy_type_from_id - Get the phy type
- * @hw: pointer to hardware structure
- *
- **/
-static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id)
-{
- enum ixgbe_phy_type phy_type;
-
- switch (phy_id) {
- case QT2022_PHY_ID:
- phy_type = ixgbe_phy_qt;
- break;
- default:
- phy_type = ixgbe_phy_unknown;
- break;
- }
-
- return phy_type;
-}
-
-/**
- * ixgbe_reset_phy_generic - Performs a PHY reset
- * @hw: pointer to hardware structure
- **/
-s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw)
-{
- /*
- * Perform soft PHY reset to the PHY_XS.
- * This will cause a soft reset to the PHY
- */
- return hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
- IXGBE_MDIO_PHY_XS_DEV_TYPE,
- IXGBE_MDIO_PHY_XS_RESET);
-}
-
-/**
- * ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register
- * @hw: pointer to hardware structure
- * @reg_addr: 32 bit address of PHY register to read
- * @phy_data: Pointer to read data from PHY register
- **/
-s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
- u32 device_type, u16 *phy_data)
-{
- u32 command;
- u32 i;
- u32 data;
- s32 status = 0;
- u16 gssr;
-
- if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
- gssr = IXGBE_GSSR_PHY1_SM;
- else
- gssr = IXGBE_GSSR_PHY0_SM;
-
- if (ixgbe_acquire_swfw_sync(hw, gssr) != 0)
- status = IXGBE_ERR_SWFW_SYNC;
-
- if (status == 0) {
- /* Setup and write the address cycle command */
- command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
- (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
- (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
- (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
-
- IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
-
- /*
- * Check every 10 usec to see if the address cycle completed.
- * The MDI Command bit will clear when the operation is
- * complete
- */
- for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
- udelay(10);
-
- command = IXGBE_READ_REG(hw, IXGBE_MSCA);
-
- if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
- break;
- }
-
- if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
- hw_dbg(hw, "PHY address command did not complete.\n");
- status = IXGBE_ERR_PHY;
- }
-
- if (status == 0) {
- /*
- * Address cycle complete, setup and write the read
- * command
- */
- command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
- (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
- (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
- (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND));
-
- IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
-
- /*
- * Check every 10 usec to see if the address cycle
- * completed. The MDI Command bit will clear when the
- * operation is complete
- */
- for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
- udelay(10);
-
- command = IXGBE_READ_REG(hw, IXGBE_MSCA);
-
- if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
- break;
- }
-
- if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
- hw_dbg(hw, "PHY read command didn't complete\n");
- status = IXGBE_ERR_PHY;
- } else {
- /*
- * Read operation is complete. Get the data
- * from MSRWD
- */
- data = IXGBE_READ_REG(hw, IXGBE_MSRWD);
- data >>= IXGBE_MSRWD_READ_DATA_SHIFT;
- *phy_data = (u16)(data);
- }
- }
-
- ixgbe_release_swfw_sync(hw, gssr);
- }
-
- return status;
-}
-
-/**
- * ixgbe_write_phy_reg_generic - Writes a value to specified PHY register
- * @hw: pointer to hardware structure
- * @reg_addr: 32 bit PHY register to write
- * @device_type: 5 bit device type
- * @phy_data: Data to write to the PHY register
- **/
-s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
- u32 device_type, u16 phy_data)
-{
- u32 command;
- u32 i;
- s32 status = 0;
- u16 gssr;
-
- if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
- gssr = IXGBE_GSSR_PHY1_SM;
- else
- gssr = IXGBE_GSSR_PHY0_SM;
-
- if (ixgbe_acquire_swfw_sync(hw, gssr) != 0)
- status = IXGBE_ERR_SWFW_SYNC;
-
- if (status == 0) {
- /* Put the data in the MDI single read and write data register*/
- IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data);
-
- /* Setup and write the address cycle command */
- command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
- (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
- (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
- (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
-
- IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
-
- /*
- * Check every 10 usec to see if the address cycle completed.
- * The MDI Command bit will clear when the operation is
- * complete
- */
- for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
- udelay(10);
-
- command = IXGBE_READ_REG(hw, IXGBE_MSCA);
-
- if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
- break;
- }
-
- if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
- hw_dbg(hw, "PHY address cmd didn't complete\n");
- status = IXGBE_ERR_PHY;
- }
-
- if (status == 0) {
- /*
- * Address cycle complete, setup and write the write
- * command
- */
- command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
- (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
- (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
- (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND));
-
- IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
-
- /*
- * Check every 10 usec to see if the address cycle
- * completed. The MDI Command bit will clear when the
- * operation is complete
- */
- for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
- udelay(10);
-
- command = IXGBE_READ_REG(hw, IXGBE_MSCA);
-
- if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
- break;
- }
-
- if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
- hw_dbg(hw, "PHY address cmd didn't complete\n");
- status = IXGBE_ERR_PHY;
- }
- }
-
- ixgbe_release_swfw_sync(hw, gssr);
- }
-
- return status;
-}
-
-/**
- * ixgbe_setup_phy_link_generic - Set and restart autoneg
- * @hw: pointer to hardware structure
- *
- * Restart autonegotiation and PHY and waits for completion.
- **/
-s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
-{
- s32 status = IXGBE_NOT_IMPLEMENTED;
- u32 time_out;
- u32 max_time_out = 10;
- u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
-
- /*
- * Set advertisement settings in PHY based on autoneg_advertised
- * settings. If autoneg_advertised = 0, then advertise default values
- * tnx devices cannot be "forced" to a autoneg 10G and fail. But can
- * for a 1G.
- */
- hw->phy.ops.read_reg(hw, IXGBE_MII_SPEED_SELECTION_REG,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);
-
- if (hw->phy.autoneg_advertised == IXGBE_LINK_SPEED_1GB_FULL)
- autoneg_reg &= 0xEFFF; /* 0 in bit 12 is 1G operation */
- else
- autoneg_reg |= 0x1000; /* 1 in bit 12 is 10G/1G operation */
-
- hw->phy.ops.write_reg(hw, IXGBE_MII_SPEED_SELECTION_REG,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);
-
- /* Restart PHY autonegotiation and wait for completion */
- hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);
-
- autoneg_reg |= IXGBE_MII_RESTART;
-
- hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);
-
- /* Wait for autonegotiation to finish */
- for (time_out = 0; time_out < max_time_out; time_out++) {
- udelay(10);
- /* Restart PHY autonegotiation and wait for completion */
- status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- &autoneg_reg);
-
- autoneg_reg &= IXGBE_MII_AUTONEG_COMPLETE;
- if (autoneg_reg == IXGBE_MII_AUTONEG_COMPLETE) {
- status = 0;
- break;
- }
- }
-
- if (time_out == max_time_out)
- status = IXGBE_ERR_LINK_SETUP;
-
- return status;
-}
-
-/**
- * ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities
- * @hw: pointer to hardware structure
- * @speed: new link speed
- * @autoneg: true if autonegotiation enabled
- **/
-s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
- ixgbe_link_speed speed,
- bool autoneg,
- bool autoneg_wait_to_complete)
-{
-
- /*
- * Clear autoneg_advertised and set new values based on input link
- * speed.
- */
- hw->phy.autoneg_advertised = 0;
-
- if (speed & IXGBE_LINK_SPEED_10GB_FULL)
- hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
-
- if (speed & IXGBE_LINK_SPEED_1GB_FULL)
- hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
-
- /* Setup link based on the new speed settings */
- hw->phy.ops.setup_link(hw);
-
- return 0;
-}
-
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-17 01:21:28 +0000