diff options
Diffstat (limited to 'drivers/net/ixgbe/ixgbe_phy.c')
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_phy.c | 754 |
1 files changed, 0 insertions, 754 deletions
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c deleted file mode 100644 index 5a8669aedf6..00000000000 --- a/drivers/net/ixgbe/ixgbe_phy.c +++ /dev/null @@ -1,754 +0,0 @@ -/******************************************************************************* - - Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/sched.h> - -#include "ixgbe_common.h" -#include "ixgbe_phy.h" - -static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr); -static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id); -static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw); - -/** - * ixgbe_identify_phy_generic - Get physical layer module - * @hw: pointer to hardware structure - * - * Determines the physical layer module found on the current adapter. - **/ -s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw) -{ - s32 status = IXGBE_ERR_PHY_ADDR_INVALID; - u32 phy_addr; - - if (hw->phy.type == ixgbe_phy_unknown) { - for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) { - if (ixgbe_validate_phy_addr(hw, phy_addr)) { - hw->phy.addr = phy_addr; - ixgbe_get_phy_id(hw); - hw->phy.type = - ixgbe_get_phy_type_from_id(hw->phy.id); - status = 0; - break; - } - } - } else { - status = 0; - } - - return status; -} - -/** - * ixgbe_validate_phy_addr - Determines phy address is valid - * @hw: pointer to hardware structure - * - **/ -static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr) -{ - u16 phy_id = 0; - bool valid = false; - - hw->phy.addr = phy_addr; - hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, &phy_id); - - if (phy_id != 0xFFFF && phy_id != 0x0) - valid = true; - - return valid; -} - -/** - * ixgbe_get_phy_id - Get the phy type - * @hw: pointer to hardware structure - * - **/ -static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw) -{ - u32 status; - u16 phy_id_high = 0; - u16 phy_id_low = 0; - - status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, - &phy_id_high); - - if (status == 0) { - hw->phy.id = (u32)(phy_id_high << 16); - status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_LOW, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, - &phy_id_low); - hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK); - hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK); - } - return status; -} - -/** - * ixgbe_get_phy_type_from_id - Get the phy type - * @hw: pointer to hardware structure - * - **/ -static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id) -{ - enum ixgbe_phy_type phy_type; - - switch (phy_id) { - case TN1010_PHY_ID: - phy_type = ixgbe_phy_tn; - break; - case QT2022_PHY_ID: - phy_type = ixgbe_phy_qt; - break; - case ATH_PHY_ID: - phy_type = ixgbe_phy_nl; - break; - default: - phy_type = ixgbe_phy_unknown; - break; - } - - return phy_type; -} - -/** - * ixgbe_reset_phy_generic - Performs a PHY reset - * @hw: pointer to hardware structure - **/ -s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw) -{ - /* - * Perform soft PHY reset to the PHY_XS. - * This will cause a soft reset to the PHY - */ - return hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, - IXGBE_MDIO_PHY_XS_DEV_TYPE, - IXGBE_MDIO_PHY_XS_RESET); -} - -/** - * ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register - * @hw: pointer to hardware structure - * @reg_addr: 32 bit address of PHY register to read - * @phy_data: Pointer to read data from PHY register - **/ -s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, - u32 device_type, u16 *phy_data) -{ - u32 command; - u32 i; - u32 data; - s32 status = 0; - u16 gssr; - - if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) - gssr = IXGBE_GSSR_PHY1_SM; - else - gssr = IXGBE_GSSR_PHY0_SM; - - if (ixgbe_acquire_swfw_sync(hw, gssr) != 0) - status = IXGBE_ERR_SWFW_SYNC; - - if (status == 0) { - /* Setup and write the address cycle command */ - command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | - (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | - (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); - - IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); - - /* - * Check every 10 usec to see if the address cycle completed. - * The MDI Command bit will clear when the operation is - * complete - */ - for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { - udelay(10); - - command = IXGBE_READ_REG(hw, IXGBE_MSCA); - - if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) - break; - } - - if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { - hw_dbg(hw, "PHY address command did not complete.\n"); - status = IXGBE_ERR_PHY; - } - - if (status == 0) { - /* - * Address cycle complete, setup and write the read - * command - */ - command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | - (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | - (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND)); - - IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); - - /* - * Check every 10 usec to see if the address cycle - * completed. The MDI Command bit will clear when the - * operation is complete - */ - for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { - udelay(10); - - command = IXGBE_READ_REG(hw, IXGBE_MSCA); - - if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) - break; - } - - if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { - hw_dbg(hw, "PHY read command didn't complete\n"); - status = IXGBE_ERR_PHY; - } else { - /* - * Read operation is complete. Get the data - * from MSRWD - */ - data = IXGBE_READ_REG(hw, IXGBE_MSRWD); - data >>= IXGBE_MSRWD_READ_DATA_SHIFT; - *phy_data = (u16)(data); - } - } - - ixgbe_release_swfw_sync(hw, gssr); - } - - return status; -} - -/** - * ixgbe_write_phy_reg_generic - Writes a value to specified PHY register - * @hw: pointer to hardware structure - * @reg_addr: 32 bit PHY register to write - * @device_type: 5 bit device type - * @phy_data: Data to write to the PHY register - **/ -s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, - u32 device_type, u16 phy_data) -{ - u32 command; - u32 i; - s32 status = 0; - u16 gssr; - - if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) - gssr = IXGBE_GSSR_PHY1_SM; - else - gssr = IXGBE_GSSR_PHY0_SM; - - if (ixgbe_acquire_swfw_sync(hw, gssr) != 0) - status = IXGBE_ERR_SWFW_SYNC; - - if (status == 0) { - /* Put the data in the MDI single read and write data register*/ - IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data); - - /* Setup and write the address cycle command */ - command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | - (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | - (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); - - IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); - - /* - * Check every 10 usec to see if the address cycle completed. - * The MDI Command bit will clear when the operation is - * complete - */ - for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { - udelay(10); - - command = IXGBE_READ_REG(hw, IXGBE_MSCA); - - if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) - break; - } - - if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { - hw_dbg(hw, "PHY address cmd didn't complete\n"); - status = IXGBE_ERR_PHY; - } - - if (status == 0) { - /* - * Address cycle complete, setup and write the write - * command - */ - command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | - (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | - (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND)); - - IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); - - /* - * Check every 10 usec to see if the address cycle - * completed. The MDI Command bit will clear when the - * operation is complete - */ - for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { - udelay(10); - - command = IXGBE_READ_REG(hw, IXGBE_MSCA); - - if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) - break; - } - - if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { - hw_dbg(hw, "PHY address cmd didn't complete\n"); - status = IXGBE_ERR_PHY; - } - } - - ixgbe_release_swfw_sync(hw, gssr); - } - - return status; -} - -/** - * ixgbe_setup_phy_link_generic - Set and restart autoneg - * @hw: pointer to hardware structure - * - * Restart autonegotiation and PHY and waits for completion. - **/ -s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw) -{ - s32 status = IXGBE_NOT_IMPLEMENTED; - u32 time_out; - u32 max_time_out = 10; - u16 autoneg_reg = IXGBE_MII_AUTONEG_REG; - - /* - * Set advertisement settings in PHY based on autoneg_advertised - * settings. If autoneg_advertised = 0, then advertise default values - * tnx devices cannot be "forced" to a autoneg 10G and fail. But can - * for a 1G. - */ - hw->phy.ops.read_reg(hw, IXGBE_MII_SPEED_SELECTION_REG, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg); - - if (hw->phy.autoneg_advertised == IXGBE_LINK_SPEED_1GB_FULL) - autoneg_reg &= 0xEFFF; /* 0 in bit 12 is 1G operation */ - else - autoneg_reg |= 0x1000; /* 1 in bit 12 is 10G/1G operation */ - - hw->phy.ops.write_reg(hw, IXGBE_MII_SPEED_SELECTION_REG, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg); - - /* Restart PHY autonegotiation and wait for completion */ - hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg); - - autoneg_reg |= IXGBE_MII_RESTART; - - hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg); - - /* Wait for autonegotiation to finish */ - for (time_out = 0; time_out < max_time_out; time_out++) { - udelay(10); - /* Restart PHY autonegotiation and wait for completion */ - status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, - &autoneg_reg); - - autoneg_reg &= IXGBE_MII_AUTONEG_COMPLETE; - if (autoneg_reg == IXGBE_MII_AUTONEG_COMPLETE) { - status = 0; - break; - } - } - - if (time_out == max_time_out) - status = IXGBE_ERR_LINK_SETUP; - - return status; -} - -/** - * ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg: true if autonegotiation enabled - **/ -s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw, - ixgbe_link_speed speed, - bool autoneg, - bool autoneg_wait_to_complete) -{ - - /* - * Clear autoneg_advertised and set new values based on input link - * speed. - */ - hw->phy.autoneg_advertised = 0; - - if (speed & IXGBE_LINK_SPEED_10GB_FULL) - hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL; - - if (speed & IXGBE_LINK_SPEED_1GB_FULL) - hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL; - - /* Setup link based on the new speed settings */ - hw->phy.ops.setup_link(hw); - - return 0; -} - -/** - * ixgbe_reset_phy_nl - Performs a PHY reset - * @hw: pointer to hardware structure - **/ -s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw) -{ - u16 phy_offset, control, eword, edata, block_crc; - bool end_data = false; - u16 list_offset, data_offset; - u16 phy_data = 0; - s32 ret_val = 0; - u32 i; - - hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, - IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data); - - /* reset the PHY and poll for completion */ - hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, - IXGBE_MDIO_PHY_XS_DEV_TYPE, - (phy_data | IXGBE_MDIO_PHY_XS_RESET)); - - for (i = 0; i < 100; i++) { - hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, - IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data); - if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) == 0) - break; - msleep(10); - } - - if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) != 0) { - hw_dbg(hw, "PHY reset did not complete.\n"); - ret_val = IXGBE_ERR_PHY; - goto out; - } - - /* Get init offsets */ - ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset, - &data_offset); - if (ret_val != 0) - goto out; - - ret_val = hw->eeprom.ops.read(hw, data_offset, &block_crc); - data_offset++; - while (!end_data) { - /* - * Read control word from PHY init contents offset - */ - ret_val = hw->eeprom.ops.read(hw, data_offset, &eword); - control = (eword & IXGBE_CONTROL_MASK_NL) >> - IXGBE_CONTROL_SHIFT_NL; - edata = eword & IXGBE_DATA_MASK_NL; - switch (control) { - case IXGBE_DELAY_NL: - data_offset++; - hw_dbg(hw, "DELAY: %d MS\n", edata); - msleep(edata); - break; - case IXGBE_DATA_NL: - hw_dbg(hw, "DATA: \n"); - data_offset++; - hw->eeprom.ops.read(hw, data_offset++, - &phy_offset); - for (i = 0; i < edata; i++) { - hw->eeprom.ops.read(hw, data_offset, &eword); - hw->phy.ops.write_reg(hw, phy_offset, - IXGBE_TWINAX_DEV, eword); - hw_dbg(hw, "Wrote %4.4x to %4.4x\n", eword, - phy_offset); - data_offset++; - phy_offset++; - } - break; - case IXGBE_CONTROL_NL: - data_offset++; - hw_dbg(hw, "CONTROL: \n"); - if (edata == IXGBE_CONTROL_EOL_NL) { - hw_dbg(hw, "EOL\n"); - end_data = true; - } else if (edata == IXGBE_CONTROL_SOL_NL) { - hw_dbg(hw, "SOL\n"); - } else { - hw_dbg(hw, "Bad control value\n"); - ret_val = IXGBE_ERR_PHY; - goto out; - } - break; - default: - hw_dbg(hw, "Bad control type\n"); - ret_val = IXGBE_ERR_PHY; - goto out; - } - } - -out: - return ret_val; -} - -/** - * ixgbe_identify_sfp_module_generic - Identifies SFP module and assigns - * the PHY type. - * @hw: pointer to hardware structure - * - * Searches for and indentifies the SFP module. Assings appropriate PHY type. - **/ -s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) -{ - s32 status = IXGBE_ERR_PHY_ADDR_INVALID; - u32 vendor_oui = 0; - u8 identifier = 0; - u8 comp_codes_1g = 0; - u8 comp_codes_10g = 0; - u8 oui_bytes[4] = {0, 0, 0, 0}; - u8 transmission_media = 0; - - status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER, - &identifier); - - if (status == IXGBE_ERR_SFP_NOT_PRESENT) { - hw->phy.sfp_type = ixgbe_sfp_type_not_present; - goto out; - } - - if (identifier == IXGBE_SFF_IDENTIFIER_SFP) { - hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_1GBE_COMP_CODES, - &comp_codes_1g); - hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_10GBE_COMP_CODES, - &comp_codes_10g); - hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_TRANSMISSION_MEDIA, - &transmission_media); - - /* ID Module - * ========= - * 0 SFP_DA_CU - * 1 SFP_SR - * 2 SFP_LR - */ - if (transmission_media & IXGBE_SFF_TWIN_AX_CAPABLE) - hw->phy.sfp_type = ixgbe_sfp_type_da_cu; - else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) - hw->phy.sfp_type = ixgbe_sfp_type_sr; - else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) - hw->phy.sfp_type = ixgbe_sfp_type_lr; - else - hw->phy.sfp_type = ixgbe_sfp_type_unknown; - - /* Determine PHY vendor */ - if (hw->phy.type == ixgbe_phy_unknown) { - hw->phy.id = identifier; - hw->phy.ops.read_i2c_eeprom(hw, - IXGBE_SFF_VENDOR_OUI_BYTE0, - &oui_bytes[0]); - hw->phy.ops.read_i2c_eeprom(hw, - IXGBE_SFF_VENDOR_OUI_BYTE1, - &oui_bytes[1]); - hw->phy.ops.read_i2c_eeprom(hw, - IXGBE_SFF_VENDOR_OUI_BYTE2, - &oui_bytes[2]); - - vendor_oui = - ((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) | - (oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) | - (oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT)); - - switch (vendor_oui) { - case IXGBE_SFF_VENDOR_OUI_TYCO: - if (transmission_media & - IXGBE_SFF_TWIN_AX_CAPABLE) - hw->phy.type = ixgbe_phy_tw_tyco; - break; - case IXGBE_SFF_VENDOR_OUI_FTL: - hw->phy.type = ixgbe_phy_sfp_ftl; - break; - case IXGBE_SFF_VENDOR_OUI_AVAGO: - hw->phy.type = ixgbe_phy_sfp_avago; - break; - default: - if (transmission_media & - IXGBE_SFF_TWIN_AX_CAPABLE) - hw->phy.type = ixgbe_phy_tw_unknown; - else - hw->phy.type = ixgbe_phy_sfp_unknown; - break; - } - } - status = 0; - } - -out: - return status; -} - -/** - * ixgbe_get_sfp_init_sequence_offsets - Checks the MAC's EEPROM to see - * if it supports a given SFP+ module type, if so it returns the offsets to the - * phy init sequence block. - * @hw: pointer to hardware structure - * @list_offset: offset to the SFP ID list - * @data_offset: offset to the SFP data block - **/ -s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, - u16 *list_offset, - u16 *data_offset) -{ - u16 sfp_id; - - if (hw->phy.sfp_type == ixgbe_sfp_type_unknown) - return IXGBE_ERR_SFP_NOT_SUPPORTED; - - if (hw->phy.sfp_type == ixgbe_sfp_type_not_present) - return IXGBE_ERR_SFP_NOT_PRESENT; - - if ((hw->device_id == IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM) && - (hw->phy.sfp_type == ixgbe_sfp_type_da_cu)) - return IXGBE_ERR_SFP_NOT_SUPPORTED; - - /* Read offset to PHY init contents */ - hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset); - - if ((!*list_offset) || (*list_offset == 0xFFFF)) - return IXGBE_ERR_PHY; - - /* Shift offset to first ID word */ - (*list_offset)++; - - /* - * Find the matching SFP ID in the EEPROM - * and program the init sequence - */ - hw->eeprom.ops.read(hw, *list_offset, &sfp_id); - - while (sfp_id != IXGBE_PHY_INIT_END_NL) { - if (sfp_id == hw->phy.sfp_type) { - (*list_offset)++; - hw->eeprom.ops.read(hw, *list_offset, data_offset); - if ((!*data_offset) || (*data_offset == 0xFFFF)) { - hw_dbg(hw, "SFP+ module not supported\n"); - return IXGBE_ERR_SFP_NOT_SUPPORTED; - } else { - break; - } - } else { - (*list_offset) += 2; - if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id)) - return IXGBE_ERR_PHY; - } - } - - if (sfp_id == IXGBE_PHY_INIT_END_NL) { - hw_dbg(hw, "No matching SFP+ module found\n"); - return IXGBE_ERR_SFP_NOT_SUPPORTED; - } - - return 0; -} - -/** - * ixgbe_check_phy_link_tnx - Determine link and speed status - * @hw: pointer to hardware structure - * - * Reads the VS1 register to determine if link is up and the current speed for - * the PHY. - **/ -s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed, - bool *link_up) -{ - s32 status = 0; - u32 time_out; - u32 max_time_out = 10; - u16 phy_link = 0; - u16 phy_speed = 0; - u16 phy_data = 0; - - /* Initialize speed and link to default case */ - *link_up = false; - *speed = IXGBE_LINK_SPEED_10GB_FULL; - - /* - * Check current speed and link status of the PHY register. - * This is a vendor specific register and may have to - * be changed for other copper PHYs. - */ - for (time_out = 0; time_out < max_time_out; time_out++) { - udelay(10); - status = hw->phy.ops.read_reg(hw, - IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS, - IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, - &phy_data); - phy_link = phy_data & - IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS; - phy_speed = phy_data & - IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS; - if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) { - *link_up = true; - if (phy_speed == - IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS) - *speed = IXGBE_LINK_SPEED_1GB_FULL; - break; - } - } - - return status; -} - -/** - * ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version - * @hw: pointer to hardware structure - * @firmware_version: pointer to the PHY Firmware Version - **/ -s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw, - u16 *firmware_version) -{ - s32 status = 0; - - status = hw->phy.ops.read_reg(hw, TNX_FW_REV, - IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, - firmware_version); - - return status; -} - |