diff options
Diffstat (limited to 'drivers/net/irda/Kconfig')
| -rw-r--r-- | drivers/net/irda/Kconfig | 121 |
1 files changed, 90 insertions, 31 deletions
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig index e6317557a53..8d101d63abc 100644 --- a/drivers/net/irda/Kconfig +++ b/drivers/net/irda/Kconfig @@ -5,7 +5,7 @@ comment "SIR device drivers" config IRTTY_SIR tristate "IrTTY (uses Linux serial driver)" - depends on IRDA + depends on IRDA && TTY help Say Y here if you want to build support for the IrTTY line discipline. To compile it as a module, choose M here: the module @@ -17,6 +17,61 @@ config IRTTY_SIR If unsure, say Y. +config BFIN_SIR + tristate "Blackfin SIR on UART" + depends on BLACKFIN && IRDA + default n + help + Say Y here if your want to enable SIR function on Blackfin UART + devices. + + To activate this driver you can start irattach like: + "irattach irda0 -s" + + Saying M, it will be built as a module named bfin_sir. + + Note that you need to turn off one of the serial drivers for SIR + to use that UART. + +config BFIN_SIR0 + bool "Blackfin SIR on UART0" + depends on BFIN_SIR && !SERIAL_BFIN_UART0 + +config BFIN_SIR1 + bool "Blackfin SIR on UART1" + depends on BFIN_SIR && !SERIAL_BFIN_UART1 && (!BF531 && !BF532 && !BF533 && !BF561) + +config BFIN_SIR2 + bool "Blackfin SIR on UART2" + depends on BFIN_SIR && !SERIAL_BFIN_UART2 && (BF54x || BF538 || BF539) + +config BFIN_SIR3 + bool "Blackfin SIR on UART3" + depends on BFIN_SIR && !SERIAL_BFIN_UART3 && (BF54x) + +choice + prompt "SIR Mode" + depends on BFIN_SIR + default SIR_BFIN_DMA + +config SIR_BFIN_DMA + bool "DMA mode" + depends on !DMA_UNCACHED_NONE + +config SIR_BFIN_PIO + bool "PIO mode" +endchoice + +config SH_SIR + tristate "SuperH SIR on UART" + depends on IRDA && SUPERH && \ + (CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7723 || \ + CPU_SUBTYPE_SH7724) + default n + help + Say Y here if your want to enable SIR function on SuperH UART + devices. + comment "Dongle support" config DONGLE @@ -85,7 +140,7 @@ config LITELINK_DONGLE config MA600_DONGLE tristate "Mobile Action MA600 dongle" - depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL + depends on IRTTY_SIR && DONGLE && IRDA help Say Y here if you want to build support for the Mobile Action MA600 dongle. To compile it as a module, choose M here. The MA600 dongle @@ -98,7 +153,7 @@ config MA600_DONGLE config GIRBIL_DONGLE tristate "Greenwich GIrBIL dongle" - depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL + depends on IRTTY_SIR && DONGLE && IRDA help Say Y here if you want to build support for the Greenwich GIrBIL dongle. If you want to compile it as a module, choose M here. @@ -109,7 +164,7 @@ config GIRBIL_DONGLE config MCP2120_DONGLE tristate "Microchip MCP2120" - depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL + depends on IRTTY_SIR && DONGLE && IRDA help Say Y here if you want to build support for the Microchip MCP2120 dongle. If you want to compile it as a module, choose M here. @@ -123,16 +178,16 @@ config MCP2120_DONGLE config OLD_BELKIN_DONGLE tristate "Old Belkin dongle" - depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL + depends on IRTTY_SIR && DONGLE && IRDA help Say Y here if you want to build support for the Adaptec Airport 1000 and 2000 dongles. If you want to compile it as a module, choose M here. Some information is contained in the comments - at the top of <file:drivers/net/irda/old_belkin.c>. + at the top of <file:drivers/net/irda/old_belkin-sir.c>. config ACT200L_DONGLE tristate "ACTiSYS IR-200L dongle" - depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL + depends on IRTTY_SIR && DONGLE && IRDA help Say Y here if you want to build support for the ACTiSYS IR-200L dongle. If you want to compile it as a module, choose M here. @@ -143,7 +198,7 @@ config ACT200L_DONGLE config KINGSUN_DONGLE tristate "KingSun/DonShine DS-620 IrDA-USB dongle" - depends on IRDA && USB && EXPERIMENTAL + depends on IRDA && USB help Say Y or M here if you want to build support for the KingSun/DonShine DS-620 IrDA-USB bridge device driver. @@ -155,16 +210,9 @@ config KINGSUN_DONGLE To compile it as a module, choose M here: the module will be called kingsun-sir. -config EP7211_DONGLE - tristate "EP7211 I/R support" - depends on IRTTY_SIR && ARCH_EP7211 && IRDA && EXPERIMENTAL - help - Say Y here if you want to build support for the Cirrus logic - EP7211 chipset's infrared module. - config KSDAZZLE_DONGLE - tristate "KingSun Dazzle IrDA-USB dongle (EXPERIMENTAL)" - depends on IRDA && USB && EXPERIMENTAL + tristate "KingSun Dazzle IrDA-USB dongle" + depends on IRDA && USB help Say Y or M here if you want to build support for the KingSun Dazzle IrDA-USB bridge device driver. @@ -177,8 +225,8 @@ config KSDAZZLE_DONGLE ksdazzle-sir. config KS959_DONGLE - tristate "KingSun KS-959 IrDA-USB dongle (EXPERIMENTAL)" - depends on IRDA && USB && EXPERIMENTAL + tristate "KingSun KS-959 IrDA-USB dongle" + depends on IRDA && USB help Say Y or M here if you want to build support for the KingSun KS-959 IrDA-USB bridge device driver. @@ -209,8 +257,8 @@ config USB_IRDA you will need both USB and IrDA support in your kernel... config SIGMATEL_FIR - tristate "SigmaTel STIr4200 bridge (EXPERIMENTAL)" - depends on IRDA && USB && EXPERIMENTAL + tristate "SigmaTel STIr4200 bridge" + depends on IRDA && USB select CRC32 ---help--- Say Y here if you want to build support for the SigmaTel STIr4200 @@ -258,12 +306,16 @@ config TOSHIBA_FIR donauboe. config AU1000_FIR - tristate "Alchemy Au1000 SIR/FIR" - depends on SOC_AU1000 && IRDA + tristate "Alchemy IrDA SIR/FIR" + depends on IRDA && MIPS_ALCHEMY + help + Say Y/M here to build support the IrDA peripheral on the + Alchemy Au1000 and Au1100 SoCs. + Say M to build a module; it will be called au1k_ir.ko config SMC_IRCC_FIR - tristate "SMSC IrCC (EXPERIMENTAL)" - depends on EXPERIMENTAL && IRDA && ISA_DMA_API + tristate "SMSC IrCC" + depends on IRDA && ISA_DMA_API help Say Y here if you want to build support for the SMC Infrared Communications Controller. It is used in a wide variety of @@ -272,8 +324,8 @@ config SMC_IRCC_FIR smsc-ircc2.o. config ALI_FIR - tristate "ALi M5123 FIR (EXPERIMENTAL)" - depends on EXPERIMENTAL && IRDA && ISA_DMA_API + tristate "ALi M5123 FIR" + depends on IRDA && ISA_DMA_API help Say Y here if you want to build support for the ALi M5123 FIR Controller. The ALi M5123 FIR Controller is embedded in ALi M1543C, @@ -284,8 +336,8 @@ config ALI_FIR ali-ircc. config VLSI_FIR - tristate "VLSI 82C147 SIR/MIR/FIR (EXPERIMENTAL)" - depends on EXPERIMENTAL && IRDA && PCI + tristate "VLSI 82C147 SIR/MIR/FIR" + depends on IRDA && PCI help Say Y here if you want to build support for the VLSI 82C147 PCI-IrDA Controller. This controller is used by the HP OmniBook 800 @@ -297,7 +349,7 @@ config VLSI_FIR config SA1100_FIR tristate "SA1100 Internal IR" - depends on ARCH_SA1100 && IRDA + depends on ARCH_SA1100 && IRDA && DMA_SA11X0 config VIA_FIR tristate "VIA VT8231/VT1211 SIR/MIR/FIR" @@ -328,7 +380,7 @@ config PXA_FICP config MCS_FIR tristate "MosChip MCS7780 IrDA-USB dongle" - depends on IRDA && USB && EXPERIMENTAL + depends on IRDA && USB select CRC32 help Say Y or M here if you want to build support for the MosChip @@ -342,5 +394,12 @@ config MCS_FIR To compile it as a module, choose M here: the module will be called mcs7780. +config SH_IRDA + tristate "SuperH IrDA driver" + depends on IRDA + depends on ARCH_SHMOBILE || COMPILE_TEST + help + Say Y here if your want to enable SuperH IrDA devices. + endmenu |