diff options
Diffstat (limited to 'drivers/net/fec.c')
| -rw-r--r-- | drivers/net/fec.c | 1444 | 
1 files changed, 0 insertions, 1444 deletions
diff --git a/drivers/net/fec.c b/drivers/net/fec.c deleted file mode 100644 index cce32d43175..00000000000 --- a/drivers/net/fec.c +++ /dev/null @@ -1,1444 +0,0 @@ -/* - * Fast Ethernet Controller (FEC) driver for Motorola MPC8xx. - * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) - * - * Right now, I am very wasteful with the buffers.  I allocate memory - * pages and then divide them into 2K frame buffers.  This way I know I - * have buffers large enough to hold one frame within one buffer descriptor. - * Once I get this working, I will use 64 or 128 byte CPM buffers, which - * will be much more memory efficient and will easily handle lots of - * small packets. - * - * Much better multiple PHY support by Magnus Damm. - * Copyright (c) 2000 Ericsson Radio Systems AB. - * - * Support for FEC controller of ColdFire processors. - * Copyright (c) 2001-2005 Greg Ungerer (gerg@snapgear.com) - * - * Bug fixes and cleanup by Philippe De Muyter (phdm@macqel.be) - * Copyright (c) 2004-2006 Macq Electronique SA. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/ptrace.h> -#include <linux/errno.h> -#include <linux/ioport.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/spinlock.h> -#include <linux/workqueue.h> -#include <linux/bitops.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/clk.h> -#include <linux/platform_device.h> -#include <linux/phy.h> -#include <linux/fec.h> - -#include <asm/cacheflush.h> - -#ifndef CONFIG_ARCH_MXC -#include <asm/coldfire.h> -#include <asm/mcfsim.h> -#endif - -#include "fec.h" - -#ifdef CONFIG_ARCH_MXC -#include <mach/hardware.h> -#define FEC_ALIGNMENT	0xf -#else -#define FEC_ALIGNMENT	0x3 -#endif - -/* - * Define the fixed address of the FEC hardware. - */ -#if defined(CONFIG_M5272) - -static unsigned char	fec_mac_default[] = { -	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -}; - -/* - * Some hardware gets it MAC address out of local flash memory. - * if this is non-zero then assume it is the address to get MAC from. - */ -#if defined(CONFIG_NETtel) -#define	FEC_FLASHMAC	0xf0006006 -#elif defined(CONFIG_GILBARCONAP) || defined(CONFIG_SCALES) -#define	FEC_FLASHMAC	0xf0006000 -#elif defined(CONFIG_CANCam) -#define	FEC_FLASHMAC	0xf0020000 -#elif defined (CONFIG_M5272C3) -#define	FEC_FLASHMAC	(0xffe04000 + 4) -#elif defined(CONFIG_MOD5272) -#define FEC_FLASHMAC 	0xffc0406b -#else -#define	FEC_FLASHMAC	0 -#endif -#endif /* CONFIG_M5272 */ - -/* The number of Tx and Rx buffers.  These are allocated from the page - * pool.  The code may assume these are power of two, so it it best - * to keep them that size. - * We don't need to allocate pages for the transmitter.  We just use - * the skbuffer directly. - */ -#define FEC_ENET_RX_PAGES	8 -#define FEC_ENET_RX_FRSIZE	2048 -#define FEC_ENET_RX_FRPPG	(PAGE_SIZE / FEC_ENET_RX_FRSIZE) -#define RX_RING_SIZE		(FEC_ENET_RX_FRPPG * FEC_ENET_RX_PAGES) -#define FEC_ENET_TX_FRSIZE	2048 -#define FEC_ENET_TX_FRPPG	(PAGE_SIZE / FEC_ENET_TX_FRSIZE) -#define TX_RING_SIZE		16	/* Must be power of two */ -#define TX_RING_MOD_MASK	15	/*   for this to work */ - -#if (((RX_RING_SIZE + TX_RING_SIZE) * 8) > PAGE_SIZE) -#error "FEC: descriptor ring size constants too large" -#endif - -/* Interrupt events/masks. */ -#define FEC_ENET_HBERR	((uint)0x80000000)	/* Heartbeat error */ -#define FEC_ENET_BABR	((uint)0x40000000)	/* Babbling receiver */ -#define FEC_ENET_BABT	((uint)0x20000000)	/* Babbling transmitter */ -#define FEC_ENET_GRA	((uint)0x10000000)	/* Graceful stop complete */ -#define FEC_ENET_TXF	((uint)0x08000000)	/* Full frame transmitted */ -#define FEC_ENET_TXB	((uint)0x04000000)	/* A buffer was transmitted */ -#define FEC_ENET_RXF	((uint)0x02000000)	/* Full frame received */ -#define FEC_ENET_RXB	((uint)0x01000000)	/* A buffer was received */ -#define FEC_ENET_MII	((uint)0x00800000)	/* MII interrupt */ -#define FEC_ENET_EBERR	((uint)0x00400000)	/* SDMA bus error */ - -#define FEC_DEFAULT_IMASK (FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII) - -/* The FEC stores dest/src/type, data, and checksum for receive packets. - */ -#define PKT_MAXBUF_SIZE		1518 -#define PKT_MINBUF_SIZE		64 -#define PKT_MAXBLR_SIZE		1520 - - -/* - * The 5270/5271/5280/5282/532x RX control register also contains maximum frame - * size bits. Other FEC hardware does not, so we need to take that into - * account when setting it. - */ -#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ -    defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARCH_MXC) -#define	OPT_FRAME_SIZE	(PKT_MAXBUF_SIZE << 16) -#else -#define	OPT_FRAME_SIZE	0 -#endif - -/* The FEC buffer descriptors track the ring buffers.  The rx_bd_base and - * tx_bd_base always point to the base of the buffer descriptors.  The - * cur_rx and cur_tx point to the currently available buffer. - * The dirty_tx tracks the current buffer that is being sent by the - * controller.  The cur_tx and dirty_tx are equal under both completely - * empty and completely full conditions.  The empty/ready indicator in - * the buffer descriptor determines the actual condition. - */ -struct fec_enet_private { -	/* Hardware registers of the FEC device */ -	void __iomem *hwp; - -	struct net_device *netdev; - -	struct clk *clk; - -	/* The saved address of a sent-in-place packet/buffer, for skfree(). */ -	unsigned char *tx_bounce[TX_RING_SIZE]; -	struct	sk_buff* tx_skbuff[TX_RING_SIZE]; -	struct	sk_buff* rx_skbuff[RX_RING_SIZE]; -	ushort	skb_cur; -	ushort	skb_dirty; - -	/* CPM dual port RAM relative addresses */ -	dma_addr_t	bd_dma; -	/* Address of Rx and Tx buffers */ -	struct bufdesc	*rx_bd_base; -	struct bufdesc	*tx_bd_base; -	/* The next free ring entry */ -	struct bufdesc	*cur_rx, *cur_tx;  -	/* The ring entries to be free()ed */ -	struct bufdesc	*dirty_tx; - -	uint	tx_full; -	/* hold while accessing the HW like ringbuffer for tx/rx but not MAC */ -	spinlock_t hw_lock; - -	struct  platform_device *pdev; - -	int	opened; - -	/* Phylib and MDIO interface */ -	struct  mii_bus *mii_bus; -	struct  phy_device *phy_dev; -	int     mii_timeout; -	uint    phy_speed; -	phy_interface_t	phy_interface; -	int	index; -	int	link; -	int	full_duplex; -	struct	completion mdio_done; -}; - -static irqreturn_t fec_enet_interrupt(int irq, void * dev_id); -static void fec_enet_tx(struct net_device *dev); -static void fec_enet_rx(struct net_device *dev); -static int fec_enet_close(struct net_device *dev); -static void fec_restart(struct net_device *dev, int duplex); -static void fec_stop(struct net_device *dev); - -/* FEC MII MMFR bits definition */ -#define FEC_MMFR_ST		(1 << 30) -#define FEC_MMFR_OP_READ	(2 << 28) -#define FEC_MMFR_OP_WRITE	(1 << 28) -#define FEC_MMFR_PA(v)		((v & 0x1f) << 23) -#define FEC_MMFR_RA(v)		((v & 0x1f) << 18) -#define FEC_MMFR_TA		(2 << 16) -#define FEC_MMFR_DATA(v)	(v & 0xffff) - -#define FEC_MII_TIMEOUT		1000 /* us */ - -/* Transmitter timeout */ -#define TX_TIMEOUT (2 * HZ) - -static netdev_tx_t -fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ -	struct fec_enet_private *fep = netdev_priv(dev); -	struct bufdesc *bdp; -	void *bufaddr; -	unsigned short	status; -	unsigned long flags; - -	if (!fep->link) { -		/* Link is down or autonegotiation is in progress. */ -		return NETDEV_TX_BUSY; -	} - -	spin_lock_irqsave(&fep->hw_lock, flags); -	/* Fill in a Tx ring entry */ -	bdp = fep->cur_tx; - -	status = bdp->cbd_sc; - -	if (status & BD_ENET_TX_READY) { -		/* Ooops.  All transmit buffers are full.  Bail out. -		 * This should not happen, since dev->tbusy should be set. -		 */ -		printk("%s: tx queue full!.\n", dev->name); -		spin_unlock_irqrestore(&fep->hw_lock, flags); -		return NETDEV_TX_BUSY; -	} - -	/* Clear all of the status flags */ -	status &= ~BD_ENET_TX_STATS; - -	/* Set buffer length and buffer pointer */ -	bufaddr = skb->data; -	bdp->cbd_datlen = skb->len; - -	/* -	 * On some FEC implementations data must be aligned on -	 * 4-byte boundaries. Use bounce buffers to copy data -	 * and get it aligned. Ugh. -	 */ -	if (((unsigned long) bufaddr) & FEC_ALIGNMENT) { -		unsigned int index; -		index = bdp - fep->tx_bd_base; -		memcpy(fep->tx_bounce[index], (void *)skb->data, skb->len); -		bufaddr = fep->tx_bounce[index]; -	} - -	/* Save skb pointer */ -	fep->tx_skbuff[fep->skb_cur] = skb; - -	dev->stats.tx_bytes += skb->len; -	fep->skb_cur = (fep->skb_cur+1) & TX_RING_MOD_MASK; - -	/* Push the data cache so the CPM does not get stale memory -	 * data. -	 */ -	bdp->cbd_bufaddr = dma_map_single(&dev->dev, bufaddr, -			FEC_ENET_TX_FRSIZE, DMA_TO_DEVICE); - -	/* Send it on its way.  Tell FEC it's ready, interrupt when done, -	 * it's the last BD of the frame, and to put the CRC on the end. -	 */ -	status |= (BD_ENET_TX_READY | BD_ENET_TX_INTR -			| BD_ENET_TX_LAST | BD_ENET_TX_TC); -	bdp->cbd_sc = status; - -	/* Trigger transmission start */ -	writel(0, fep->hwp + FEC_X_DES_ACTIVE); - -	/* If this was the last BD in the ring, start at the beginning again. */ -	if (status & BD_ENET_TX_WRAP) -		bdp = fep->tx_bd_base; -	else -		bdp++; - -	if (bdp == fep->dirty_tx) { -		fep->tx_full = 1; -		netif_stop_queue(dev); -	} - -	fep->cur_tx = bdp; - -	spin_unlock_irqrestore(&fep->hw_lock, flags); - -	return NETDEV_TX_OK; -} - -static void -fec_timeout(struct net_device *dev) -{ -	struct fec_enet_private *fep = netdev_priv(dev); - -	dev->stats.tx_errors++; - -	fec_restart(dev, fep->full_duplex); -	netif_wake_queue(dev); -} - -static irqreturn_t -fec_enet_interrupt(int irq, void * dev_id) -{ -	struct	net_device *dev = dev_id; -	struct fec_enet_private *fep = netdev_priv(dev); -	uint	int_events; -	irqreturn_t ret = IRQ_NONE; - -	do { -		int_events = readl(fep->hwp + FEC_IEVENT); -		writel(int_events, fep->hwp + FEC_IEVENT); - -		if (int_events & FEC_ENET_RXF) { -			ret = IRQ_HANDLED; -			fec_enet_rx(dev); -		} - -		/* Transmit OK, or non-fatal error. Update the buffer -		 * descriptors. FEC handles all errors, we just discover -		 * them as part of the transmit process. -		 */ -		if (int_events & FEC_ENET_TXF) { -			ret = IRQ_HANDLED; -			fec_enet_tx(dev); -		} - -		if (int_events & FEC_ENET_MII) { -			ret = IRQ_HANDLED; -			complete(&fep->mdio_done); -		} -	} while (int_events); - -	return ret; -} - - -static void -fec_enet_tx(struct net_device *dev) -{ -	struct	fec_enet_private *fep; -	struct bufdesc *bdp; -	unsigned short status; -	struct	sk_buff	*skb; - -	fep = netdev_priv(dev); -	spin_lock(&fep->hw_lock); -	bdp = fep->dirty_tx; - -	while (((status = bdp->cbd_sc) & BD_ENET_TX_READY) == 0) { -		if (bdp == fep->cur_tx && fep->tx_full == 0) -			break; - -		dma_unmap_single(&dev->dev, bdp->cbd_bufaddr, FEC_ENET_TX_FRSIZE, DMA_TO_DEVICE); -		bdp->cbd_bufaddr = 0; - -		skb = fep->tx_skbuff[fep->skb_dirty]; -		/* Check for errors. */ -		if (status & (BD_ENET_TX_HB | BD_ENET_TX_LC | -				   BD_ENET_TX_RL | BD_ENET_TX_UN | -				   BD_ENET_TX_CSL)) { -			dev->stats.tx_errors++; -			if (status & BD_ENET_TX_HB)  /* No heartbeat */ -				dev->stats.tx_heartbeat_errors++; -			if (status & BD_ENET_TX_LC)  /* Late collision */ -				dev->stats.tx_window_errors++; -			if (status & BD_ENET_TX_RL)  /* Retrans limit */ -				dev->stats.tx_aborted_errors++; -			if (status & BD_ENET_TX_UN)  /* Underrun */ -				dev->stats.tx_fifo_errors++; -			if (status & BD_ENET_TX_CSL) /* Carrier lost */ -				dev->stats.tx_carrier_errors++; -		} else { -			dev->stats.tx_packets++; -		} - -		if (status & BD_ENET_TX_READY) -			printk("HEY! Enet xmit interrupt and TX_READY.\n"); - -		/* Deferred means some collisions occurred during transmit, -		 * but we eventually sent the packet OK. -		 */ -		if (status & BD_ENET_TX_DEF) -			dev->stats.collisions++; - -		/* Free the sk buffer associated with this last transmit */ -		dev_kfree_skb_any(skb); -		fep->tx_skbuff[fep->skb_dirty] = NULL; -		fep->skb_dirty = (fep->skb_dirty + 1) & TX_RING_MOD_MASK; - -		/* Update pointer to next buffer descriptor to be transmitted */ -		if (status & BD_ENET_TX_WRAP) -			bdp = fep->tx_bd_base; -		else -			bdp++; - -		/* Since we have freed up a buffer, the ring is no longer full -		 */ -		if (fep->tx_full) { -			fep->tx_full = 0; -			if (netif_queue_stopped(dev)) -				netif_wake_queue(dev); -		} -	} -	fep->dirty_tx = bdp; -	spin_unlock(&fep->hw_lock); -} - - -/* During a receive, the cur_rx points to the current incoming buffer. - * When we update through the ring, if the next incoming buffer has - * not been given to the system, we just set the empty indicator, - * effectively tossing the packet. - */ -static void -fec_enet_rx(struct net_device *dev) -{ -	struct	fec_enet_private *fep = netdev_priv(dev); -	struct bufdesc *bdp; -	unsigned short status; -	struct	sk_buff	*skb; -	ushort	pkt_len; -	__u8 *data; - -#ifdef CONFIG_M532x -	flush_cache_all(); -#endif - -	spin_lock(&fep->hw_lock); - -	/* First, grab all of the stats for the incoming packet. -	 * These get messed up if we get called due to a busy condition. -	 */ -	bdp = fep->cur_rx; - -	while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) { - -		/* Since we have allocated space to hold a complete frame, -		 * the last indicator should be set. -		 */ -		if ((status & BD_ENET_RX_LAST) == 0) -			printk("FEC ENET: rcv is not +last\n"); - -		if (!fep->opened) -			goto rx_processing_done; - -		/* Check for errors. */ -		if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO | -			   BD_ENET_RX_CR | BD_ENET_RX_OV)) { -			dev->stats.rx_errors++; -			if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH)) { -				/* Frame too long or too short. */ -				dev->stats.rx_length_errors++; -			} -			if (status & BD_ENET_RX_NO)	/* Frame alignment */ -				dev->stats.rx_frame_errors++; -			if (status & BD_ENET_RX_CR)	/* CRC Error */ -				dev->stats.rx_crc_errors++; -			if (status & BD_ENET_RX_OV)	/* FIFO overrun */ -				dev->stats.rx_fifo_errors++; -		} - -		/* Report late collisions as a frame error. -		 * On this error, the BD is closed, but we don't know what we -		 * have in the buffer.  So, just drop this frame on the floor. -		 */ -		if (status & BD_ENET_RX_CL) { -			dev->stats.rx_errors++; -			dev->stats.rx_frame_errors++; -			goto rx_processing_done; -		} - -		/* Process the incoming frame. */ -		dev->stats.rx_packets++; -		pkt_len = bdp->cbd_datlen; -		dev->stats.rx_bytes += pkt_len; -		data = (__u8*)__va(bdp->cbd_bufaddr); - -	        dma_unmap_single(NULL, bdp->cbd_bufaddr, bdp->cbd_datlen, -        			DMA_FROM_DEVICE); - -		/* This does 16 byte alignment, exactly what we need. -		 * The packet length includes FCS, but we don't want to -		 * include that when passing upstream as it messes up -		 * bridging applications. -		 */ -		skb = dev_alloc_skb(pkt_len - 4 + NET_IP_ALIGN); - -		if (unlikely(!skb)) { -			printk("%s: Memory squeeze, dropping packet.\n", -					dev->name); -			dev->stats.rx_dropped++; -		} else { -			skb_reserve(skb, NET_IP_ALIGN); -			skb_put(skb, pkt_len - 4);	/* Make room */ -			skb_copy_to_linear_data(skb, data, pkt_len - 4); -			skb->protocol = eth_type_trans(skb, dev); -			netif_rx(skb); -		} - -        	bdp->cbd_bufaddr = dma_map_single(NULL, data, bdp->cbd_datlen, -			DMA_FROM_DEVICE); -rx_processing_done: -		/* Clear the status flags for this buffer */ -		status &= ~BD_ENET_RX_STATS; - -		/* Mark the buffer empty */ -		status |= BD_ENET_RX_EMPTY; -		bdp->cbd_sc = status; - -		/* Update BD pointer to next entry */ -		if (status & BD_ENET_RX_WRAP) -			bdp = fep->rx_bd_base; -		else -			bdp++; -		/* Doing this here will keep the FEC running while we process -		 * incoming frames.  On a heavily loaded network, we should be -		 * able to keep up at the expense of system resources. -		 */ -		writel(0, fep->hwp + FEC_R_DES_ACTIVE); -	} -	fep->cur_rx = bdp; - -	spin_unlock(&fep->hw_lock); -} - -/* ------------------------------------------------------------------------- */ -#ifdef CONFIG_M5272 -static void __inline__ fec_get_mac(struct net_device *dev) -{ -	struct fec_enet_private *fep = netdev_priv(dev); -	unsigned char *iap, tmpaddr[ETH_ALEN]; - -	if (FEC_FLASHMAC) { -		/* -		 * Get MAC address from FLASH. -		 * If it is all 1's or 0's, use the default. -		 */ -		iap = (unsigned char *)FEC_FLASHMAC; -		if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) && -		    (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0)) -			iap = fec_mac_default; -		if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) && -		    (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff)) -			iap = fec_mac_default; -	} else { -		*((unsigned long *) &tmpaddr[0]) = readl(fep->hwp + FEC_ADDR_LOW); -		*((unsigned short *) &tmpaddr[4]) = (readl(fep->hwp + FEC_ADDR_HIGH) >> 16); -		iap = &tmpaddr[0]; -	} - -	memcpy(dev->dev_addr, iap, ETH_ALEN); - -	/* Adjust MAC if using default MAC address */ -	if (iap == fec_mac_default) -		 dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index; -} -#endif - -/* ------------------------------------------------------------------------- */ - -/* - * Phy section - */ -static void fec_enet_adjust_link(struct net_device *dev) -{ -	struct fec_enet_private *fep = netdev_priv(dev); -	struct phy_device *phy_dev = fep->phy_dev; -	unsigned long flags; - -	int status_change = 0; - -	spin_lock_irqsave(&fep->hw_lock, flags); - -	/* Prevent a state halted on mii error */ -	if (fep->mii_timeout && phy_dev->state == PHY_HALTED) { -		phy_dev->state = PHY_RESUMING; -		goto spin_unlock; -	} - -	/* Duplex link change */ -	if (phy_dev->link) { -		if (fep->full_duplex != phy_dev->duplex) { -			fec_restart(dev, phy_dev->duplex); -			status_change = 1; -		} -	} - -	/* Link on or off change */ -	if (phy_dev->link != fep->link) { -		fep->link = phy_dev->link; -		if (phy_dev->link) -			fec_restart(dev, phy_dev->duplex); -		else -			fec_stop(dev); -		status_change = 1; -	} - -spin_unlock: -	spin_unlock_irqrestore(&fep->hw_lock, flags); - -	if (status_change) -		phy_print_status(phy_dev); -} - -static int fec_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum) -{ -	struct fec_enet_private *fep = bus->priv; -	unsigned long time_left; - -	fep->mii_timeout = 0; -	init_completion(&fep->mdio_done); - -	/* start a read op */ -	writel(FEC_MMFR_ST | FEC_MMFR_OP_READ | -		FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(regnum) | -		FEC_MMFR_TA, fep->hwp + FEC_MII_DATA); - -	/* wait for end of transfer */ -	time_left = wait_for_completion_timeout(&fep->mdio_done, -			usecs_to_jiffies(FEC_MII_TIMEOUT)); -	if (time_left == 0) { -		fep->mii_timeout = 1; -		printk(KERN_ERR "FEC: MDIO read timeout\n"); -		return -ETIMEDOUT; -	} - -	/* return value */ -	return FEC_MMFR_DATA(readl(fep->hwp + FEC_MII_DATA)); -} - -static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum, -			   u16 value) -{ -	struct fec_enet_private *fep = bus->priv; -	unsigned long time_left; - -	fep->mii_timeout = 0; -	init_completion(&fep->mdio_done); - -	/* start a read op */ -	writel(FEC_MMFR_ST | FEC_MMFR_OP_READ | -		FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(regnum) | -		FEC_MMFR_TA | FEC_MMFR_DATA(value), -		fep->hwp + FEC_MII_DATA); - -	/* wait for end of transfer */ -	time_left = wait_for_completion_timeout(&fep->mdio_done, -			usecs_to_jiffies(FEC_MII_TIMEOUT)); -	if (time_left == 0) { -		fep->mii_timeout = 1; -		printk(KERN_ERR "FEC: MDIO write timeout\n"); -		return -ETIMEDOUT; -	} - -	return 0; -} - -static int fec_enet_mdio_reset(struct mii_bus *bus) -{ -	return 0; -} - -static int fec_enet_mii_probe(struct net_device *dev) -{ -	struct fec_enet_private *fep = netdev_priv(dev); -	struct phy_device *phy_dev = NULL; -	char mdio_bus_id[MII_BUS_ID_SIZE]; -	char phy_name[MII_BUS_ID_SIZE + 3]; -	int phy_id; - -	fep->phy_dev = NULL; - -	/* check for attached phy */ -	for (phy_id = 0; (phy_id < PHY_MAX_ADDR); phy_id++) { -		if ((fep->mii_bus->phy_mask & (1 << phy_id))) -			continue; -		if (fep->mii_bus->phy_map[phy_id] == NULL) -			continue; -		if (fep->mii_bus->phy_map[phy_id]->phy_id == 0) -			continue; -		strncpy(mdio_bus_id, fep->mii_bus->id, MII_BUS_ID_SIZE); -		break; -	} - -	if (phy_id >= PHY_MAX_ADDR) { -		printk(KERN_INFO "%s: no PHY, assuming direct connection " -			"to switch\n", dev->name); -		strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); -		phy_id = 0; -	} - -	snprintf(phy_name, MII_BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id); -	phy_dev = phy_connect(dev, phy_name, &fec_enet_adjust_link, 0, -		PHY_INTERFACE_MODE_MII); -	if (IS_ERR(phy_dev)) { -		printk(KERN_ERR "%s: could not attach to PHY\n", dev->name); -		return PTR_ERR(phy_dev); -	} - -	/* mask with MAC supported features */ -	phy_dev->supported &= PHY_BASIC_FEATURES; -	phy_dev->advertising = phy_dev->supported; - -	fep->phy_dev = phy_dev; -	fep->link = 0; -	fep->full_duplex = 0; - -	printk(KERN_INFO "%s: Freescale FEC PHY driver [%s] " -		"(mii_bus:phy_addr=%s, irq=%d)\n", dev->name, -		fep->phy_dev->drv->name, dev_name(&fep->phy_dev->dev), -		fep->phy_dev->irq); - -	return 0; -} - -static int fec_enet_mii_init(struct platform_device *pdev) -{ -	struct net_device *dev = platform_get_drvdata(pdev); -	struct fec_enet_private *fep = netdev_priv(dev); -	int err = -ENXIO, i; - -	fep->mii_timeout = 0; - -	/* -	 * Set MII speed to 2.5 MHz (= clk_get_rate() / 2 * phy_speed) -	 */ -	fep->phy_speed = DIV_ROUND_UP(clk_get_rate(fep->clk), 5000000) << 1; -	writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED); - -	fep->mii_bus = mdiobus_alloc(); -	if (fep->mii_bus == NULL) { -		err = -ENOMEM; -		goto err_out; -	} - -	fep->mii_bus->name = "fec_enet_mii_bus"; -	fep->mii_bus->read = fec_enet_mdio_read; -	fep->mii_bus->write = fec_enet_mdio_write; -	fep->mii_bus->reset = fec_enet_mdio_reset; -	snprintf(fep->mii_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id + 1); -	fep->mii_bus->priv = fep; -	fep->mii_bus->parent = &pdev->dev; - -	fep->mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); -	if (!fep->mii_bus->irq) { -		err = -ENOMEM; -		goto err_out_free_mdiobus; -	} - -	for (i = 0; i < PHY_MAX_ADDR; i++) -		fep->mii_bus->irq[i] = PHY_POLL; - -	platform_set_drvdata(dev, fep->mii_bus); - -	if (mdiobus_register(fep->mii_bus)) -		goto err_out_free_mdio_irq; - -	return 0; - -err_out_free_mdio_irq: -	kfree(fep->mii_bus->irq); -err_out_free_mdiobus: -	mdiobus_free(fep->mii_bus); -err_out: -	return err; -} - -static void fec_enet_mii_remove(struct fec_enet_private *fep) -{ -	if (fep->phy_dev) -		phy_disconnect(fep->phy_dev); -	mdiobus_unregister(fep->mii_bus); -	kfree(fep->mii_bus->irq); -	mdiobus_free(fep->mii_bus); -} - -static int fec_enet_get_settings(struct net_device *dev, -				  struct ethtool_cmd *cmd) -{ -	struct fec_enet_private *fep = netdev_priv(dev); -	struct phy_device *phydev = fep->phy_dev; - -	if (!phydev) -		return -ENODEV; - -	return phy_ethtool_gset(phydev, cmd); -} - -static int fec_enet_set_settings(struct net_device *dev, -				 struct ethtool_cmd *cmd) -{ -	struct fec_enet_private *fep = netdev_priv(dev); -	struct phy_device *phydev = fep->phy_dev; - -	if (!phydev) -		return -ENODEV; - -	return phy_ethtool_sset(phydev, cmd); -} - -static void fec_enet_get_drvinfo(struct net_device *dev, -				 struct ethtool_drvinfo *info) -{ -	struct fec_enet_private *fep = netdev_priv(dev); - -	strcpy(info->driver, fep->pdev->dev.driver->name); -	strcpy(info->version, "Revision: 1.0"); -	strcpy(info->bus_info, dev_name(&dev->dev)); -} - -static struct ethtool_ops fec_enet_ethtool_ops = { -	.get_settings		= fec_enet_get_settings, -	.set_settings		= fec_enet_set_settings, -	.get_drvinfo		= fec_enet_get_drvinfo, -	.get_link		= ethtool_op_get_link, -}; - -static int fec_enet_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -{ -	struct fec_enet_private *fep = netdev_priv(dev); -	struct phy_device *phydev = fep->phy_dev; - -	if (!netif_running(dev)) -		return -EINVAL; - -	if (!phydev) -		return -ENODEV; - -	return phy_mii_ioctl(phydev, rq, cmd); -} - -static void fec_enet_free_buffers(struct net_device *dev) -{ -	struct fec_enet_private *fep = netdev_priv(dev); -	int i; -	struct sk_buff *skb; -	struct bufdesc	*bdp; - -	bdp = fep->rx_bd_base; -	for (i = 0; i < RX_RING_SIZE; i++) { -		skb = fep->rx_skbuff[i]; - -		if (bdp->cbd_bufaddr) -			dma_unmap_single(&dev->dev, bdp->cbd_bufaddr, -					FEC_ENET_RX_FRSIZE, DMA_FROM_DEVICE); -		if (skb) -			dev_kfree_skb(skb); -		bdp++; -	} - -	bdp = fep->tx_bd_base; -	for (i = 0; i < TX_RING_SIZE; i++) -		kfree(fep->tx_bounce[i]); -} - -static int fec_enet_alloc_buffers(struct net_device *dev) -{ -	struct fec_enet_private *fep = netdev_priv(dev); -	int i; -	struct sk_buff *skb; -	struct bufdesc	*bdp; - -	bdp = fep->rx_bd_base; -	for (i = 0; i < RX_RING_SIZE; i++) { -		skb = dev_alloc_skb(FEC_ENET_RX_FRSIZE); -		if (!skb) { -			fec_enet_free_buffers(dev); -			return -ENOMEM; -		} -		fep->rx_skbuff[i] = skb; - -		bdp->cbd_bufaddr = dma_map_single(&dev->dev, skb->data, -				FEC_ENET_RX_FRSIZE, DMA_FROM_DEVICE); -		bdp->cbd_sc = BD_ENET_RX_EMPTY; -		bdp++; -	} - -	/* Set the last buffer to wrap. */ -	bdp--; -	bdp->cbd_sc |= BD_SC_WRAP; - -	bdp = fep->tx_bd_base; -	for (i = 0; i < TX_RING_SIZE; i++) { -		fep->tx_bounce[i] = kmalloc(FEC_ENET_TX_FRSIZE, GFP_KERNEL); - -		bdp->cbd_sc = 0; -		bdp->cbd_bufaddr = 0; -		bdp++; -	} - -	/* Set the last buffer to wrap. */ -	bdp--; -	bdp->cbd_sc |= BD_SC_WRAP; - -	return 0; -} - -static int -fec_enet_open(struct net_device *dev) -{ -	struct fec_enet_private *fep = netdev_priv(dev); -	int ret; - -	/* I should reset the ring buffers here, but I don't yet know -	 * a simple way to do that. -	 */ - -	ret = fec_enet_alloc_buffers(dev); -	if (ret) -		return ret; - -	/* Probe and connect to PHY when open the interface */ -	ret = fec_enet_mii_probe(dev); -	if (ret) { -		fec_enet_free_buffers(dev); -		return ret; -	} -	phy_start(fep->phy_dev); -	netif_start_queue(dev); -	fep->opened = 1; -	return 0; -} - -static int -fec_enet_close(struct net_device *dev) -{ -	struct fec_enet_private *fep = netdev_priv(dev); - -	/* Don't know what to do yet. */ -	fep->opened = 0; -	netif_stop_queue(dev); -	fec_stop(dev); - -	if (fep->phy_dev) -		phy_disconnect(fep->phy_dev); - -        fec_enet_free_buffers(dev); - -	return 0; -} - -/* Set or clear the multicast filter for this adaptor. - * Skeleton taken from sunlance driver. - * The CPM Ethernet implementation allows Multicast as well as individual - * MAC address filtering.  Some of the drivers check to make sure it is - * a group multicast address, and discard those that are not.  I guess I - * will do the same for now, but just remove the test if you want - * individual filtering as well (do the upper net layers want or support - * this kind of feature?). - */ - -#define HASH_BITS	6		/* #bits in hash */ -#define CRC32_POLY	0xEDB88320 - -static void set_multicast_list(struct net_device *dev) -{ -	struct fec_enet_private *fep = netdev_priv(dev); -	struct netdev_hw_addr *ha; -	unsigned int i, bit, data, crc, tmp; -	unsigned char hash; - -	if (dev->flags & IFF_PROMISC) { -		tmp = readl(fep->hwp + FEC_R_CNTRL); -		tmp |= 0x8; -		writel(tmp, fep->hwp + FEC_R_CNTRL); -		return; -	} - -	tmp = readl(fep->hwp + FEC_R_CNTRL); -	tmp &= ~0x8; -	writel(tmp, fep->hwp + FEC_R_CNTRL); - -	if (dev->flags & IFF_ALLMULTI) { -		/* Catch all multicast addresses, so set the -		 * filter to all 1's -		 */ -		writel(0xffffffff, fep->hwp + FEC_GRP_HASH_TABLE_HIGH); -		writel(0xffffffff, fep->hwp + FEC_GRP_HASH_TABLE_LOW); - -		return; -	} - -	/* Clear filter and add the addresses in hash register -	 */ -	writel(0, fep->hwp + FEC_GRP_HASH_TABLE_HIGH); -	writel(0, fep->hwp + FEC_GRP_HASH_TABLE_LOW); - -	netdev_for_each_mc_addr(ha, dev) { -		/* Only support group multicast for now */ -		if (!(ha->addr[0] & 1)) -			continue; - -		/* calculate crc32 value of mac address */ -		crc = 0xffffffff; - -		for (i = 0; i < dev->addr_len; i++) { -			data = ha->addr[i]; -			for (bit = 0; bit < 8; bit++, data >>= 1) { -				crc = (crc >> 1) ^ -				(((crc ^ data) & 1) ? CRC32_POLY : 0); -			} -		} - -		/* only upper 6 bits (HASH_BITS) are used -		 * which point to specific bit in he hash registers -		 */ -		hash = (crc >> (32 - HASH_BITS)) & 0x3f; - -		if (hash > 31) { -			tmp = readl(fep->hwp + FEC_GRP_HASH_TABLE_HIGH); -			tmp |= 1 << (hash - 32); -			writel(tmp, fep->hwp + FEC_GRP_HASH_TABLE_HIGH); -		} else { -			tmp = readl(fep->hwp + FEC_GRP_HASH_TABLE_LOW); -			tmp |= 1 << hash; -			writel(tmp, fep->hwp + FEC_GRP_HASH_TABLE_LOW); -		} -	} -} - -/* Set a MAC change in hardware. */ -static int -fec_set_mac_address(struct net_device *dev, void *p) -{ -	struct fec_enet_private *fep = netdev_priv(dev); -	struct sockaddr *addr = p; - -	if (!is_valid_ether_addr(addr->sa_data)) -		return -EADDRNOTAVAIL; - -	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); - -	writel(dev->dev_addr[3] | (dev->dev_addr[2] << 8) | -		(dev->dev_addr[1] << 16) | (dev->dev_addr[0] << 24), -		fep->hwp + FEC_ADDR_LOW); -	writel((dev->dev_addr[5] << 16) | (dev->dev_addr[4] << 24), -		fep->hwp + FEC_ADDR_HIGH); -	return 0; -} - -static const struct net_device_ops fec_netdev_ops = { -	.ndo_open		= fec_enet_open, -	.ndo_stop		= fec_enet_close, -	.ndo_start_xmit		= fec_enet_start_xmit, -	.ndo_set_multicast_list = set_multicast_list, -	.ndo_change_mtu		= eth_change_mtu, -	.ndo_validate_addr	= eth_validate_addr, -	.ndo_tx_timeout		= fec_timeout, -	.ndo_set_mac_address	= fec_set_mac_address, -	.ndo_do_ioctl           = fec_enet_ioctl, -}; - - /* -  * XXX:  We need to clean up on failure exits here. -  * -  * index is only used in legacy code -  */ -static int fec_enet_init(struct net_device *dev, int index) -{ -	struct fec_enet_private *fep = netdev_priv(dev); -	struct bufdesc *cbd_base; -	struct bufdesc *bdp; -	int i; - -	/* Allocate memory for buffer descriptors. */ -	cbd_base = dma_alloc_coherent(NULL, PAGE_SIZE, &fep->bd_dma, -			GFP_KERNEL); -	if (!cbd_base) { -		printk("FEC: allocate descriptor memory failed?\n"); -		return -ENOMEM; -	} - -	spin_lock_init(&fep->hw_lock); - -	fep->index = index; -	fep->hwp = (void __iomem *)dev->base_addr; -	fep->netdev = dev; - -	/* Set the Ethernet address */ -#ifdef CONFIG_M5272 -	fec_get_mac(dev); -#else -	{ -		unsigned long l; -		l = readl(fep->hwp + FEC_ADDR_LOW); -		dev->dev_addr[0] = (unsigned char)((l & 0xFF000000) >> 24); -		dev->dev_addr[1] = (unsigned char)((l & 0x00FF0000) >> 16); -		dev->dev_addr[2] = (unsigned char)((l & 0x0000FF00) >> 8); -		dev->dev_addr[3] = (unsigned char)((l & 0x000000FF) >> 0); -		l = readl(fep->hwp + FEC_ADDR_HIGH); -		dev->dev_addr[4] = (unsigned char)((l & 0xFF000000) >> 24); -		dev->dev_addr[5] = (unsigned char)((l & 0x00FF0000) >> 16); -	} -#endif - -	/* Set receive and transmit descriptor base. */ -	fep->rx_bd_base = cbd_base; -	fep->tx_bd_base = cbd_base + RX_RING_SIZE; - -	/* The FEC Ethernet specific entries in the device structure */ -	dev->watchdog_timeo = TX_TIMEOUT; -	dev->netdev_ops = &fec_netdev_ops; -	dev->ethtool_ops = &fec_enet_ethtool_ops; - -	/* Initialize the receive buffer descriptors. */ -	bdp = fep->rx_bd_base; -	for (i = 0; i < RX_RING_SIZE; i++) { - -		/* Initialize the BD for every fragment in the page. */ -		bdp->cbd_sc = 0; -		bdp++; -	} - -	/* Set the last buffer to wrap */ -	bdp--; -	bdp->cbd_sc |= BD_SC_WRAP; - -	/* ...and the same for transmit */ -	bdp = fep->tx_bd_base; -	for (i = 0; i < TX_RING_SIZE; i++) { - -		/* Initialize the BD for every fragment in the page. */ -		bdp->cbd_sc = 0; -		bdp->cbd_bufaddr = 0; -		bdp++; -	} - -	/* Set the last buffer to wrap */ -	bdp--; -	bdp->cbd_sc |= BD_SC_WRAP; - -	fec_restart(dev, 0); - -	return 0; -} - -/* This function is called to start or restart the FEC during a link - * change.  This only happens when switching between half and full - * duplex. - */ -static void -fec_restart(struct net_device *dev, int duplex) -{ -	struct fec_enet_private *fep = netdev_priv(dev); -	int i; - -	/* Whack a reset.  We should wait for this. */ -	writel(1, fep->hwp + FEC_ECNTRL); -	udelay(10); - -	/* Clear any outstanding interrupt. */ -	writel(0xffc00000, fep->hwp + FEC_IEVENT); - -	/* Reset all multicast.	*/ -	writel(0, fep->hwp + FEC_GRP_HASH_TABLE_HIGH); -	writel(0, fep->hwp + FEC_GRP_HASH_TABLE_LOW); -#ifndef CONFIG_M5272 -	writel(0, fep->hwp + FEC_HASH_TABLE_HIGH); -	writel(0, fep->hwp + FEC_HASH_TABLE_LOW); -#endif - -	/* Set maximum receive buffer size. */ -	writel(PKT_MAXBLR_SIZE, fep->hwp + FEC_R_BUFF_SIZE); - -	/* Set receive and transmit descriptor base. */ -	writel(fep->bd_dma, fep->hwp + FEC_R_DES_START); -	writel((unsigned long)fep->bd_dma + sizeof(struct bufdesc) * RX_RING_SIZE, -			fep->hwp + FEC_X_DES_START); - -	fep->dirty_tx = fep->cur_tx = fep->tx_bd_base; -	fep->cur_rx = fep->rx_bd_base; - -	/* Reset SKB transmit buffers. */ -	fep->skb_cur = fep->skb_dirty = 0; -	for (i = 0; i <= TX_RING_MOD_MASK; i++) { -		if (fep->tx_skbuff[i]) { -			dev_kfree_skb_any(fep->tx_skbuff[i]); -			fep->tx_skbuff[i] = NULL; -		} -	} - -	/* Enable MII mode */ -	if (duplex) { -		/* MII enable / FD enable */ -		writel(OPT_FRAME_SIZE | 0x04, fep->hwp + FEC_R_CNTRL); -		writel(0x04, fep->hwp + FEC_X_CNTRL); -	} else { -		/* MII enable / No Rcv on Xmit */ -		writel(OPT_FRAME_SIZE | 0x06, fep->hwp + FEC_R_CNTRL); -		writel(0x0, fep->hwp + FEC_X_CNTRL); -	} -	fep->full_duplex = duplex; - -	/* Set MII speed */ -	writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED); - -#ifdef FEC_MIIGSK_ENR -	if (fep->phy_interface == PHY_INTERFACE_MODE_RMII) { -		/* disable the gasket and wait */ -		writel(0, fep->hwp + FEC_MIIGSK_ENR); -		while (readl(fep->hwp + FEC_MIIGSK_ENR) & 4) -			udelay(1); - -		/* configure the gasket: RMII, 50 MHz, no loopback, no echo */ -		writel(1, fep->hwp + FEC_MIIGSK_CFGR); - -		/* re-enable the gasket */ -		writel(2, fep->hwp + FEC_MIIGSK_ENR); -	} -#endif - -	/* And last, enable the transmit and receive processing */ -	writel(2, fep->hwp + FEC_ECNTRL); -	writel(0, fep->hwp + FEC_R_DES_ACTIVE); - -	/* Enable interrupts we wish to service */ -	writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK); -} - -static void -fec_stop(struct net_device *dev) -{ -	struct fec_enet_private *fep = netdev_priv(dev); - -	/* We cannot expect a graceful transmit stop without link !!! */ -	if (fep->link) { -		writel(1, fep->hwp + FEC_X_CNTRL); /* Graceful transmit stop */ -		udelay(10); -		if (!(readl(fep->hwp + FEC_IEVENT) & FEC_ENET_GRA)) -			printk("fec_stop : Graceful transmit stop did not complete !\n"); -	} - -	/* Whack a reset.  We should wait for this. */ -	writel(1, fep->hwp + FEC_ECNTRL); -	udelay(10); -	writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED); -	writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK); -} - -static int __devinit -fec_probe(struct platform_device *pdev) -{ -	struct fec_enet_private *fep; -	struct fec_platform_data *pdata; -	struct net_device *ndev; -	int i, irq, ret = 0; -	struct resource *r; - -	r = platform_get_resource(pdev, IORESOURCE_MEM, 0); -	if (!r) -		return -ENXIO; - -	r = request_mem_region(r->start, resource_size(r), pdev->name); -	if (!r) -		return -EBUSY; - -	/* Init network device */ -	ndev = alloc_etherdev(sizeof(struct fec_enet_private)); -	if (!ndev) -		return -ENOMEM; - -	SET_NETDEV_DEV(ndev, &pdev->dev); - -	/* setup board info structure */ -	fep = netdev_priv(ndev); -	memset(fep, 0, sizeof(*fep)); - -	ndev->base_addr = (unsigned long)ioremap(r->start, resource_size(r)); -	fep->pdev = pdev; - -	if (!ndev->base_addr) { -		ret = -ENOMEM; -		goto failed_ioremap; -	} - -	platform_set_drvdata(pdev, ndev); - -	pdata = pdev->dev.platform_data; -	if (pdata) -		fep->phy_interface = pdata->phy; - -	/* This device has up to three irqs on some platforms */ -	for (i = 0; i < 3; i++) { -		irq = platform_get_irq(pdev, i); -		if (i && irq < 0) -			break; -		ret = request_irq(irq, fec_enet_interrupt, IRQF_DISABLED, pdev->name, ndev); -		if (ret) { -			while (i >= 0) { -				irq = platform_get_irq(pdev, i); -				free_irq(irq, ndev); -				i--; -			} -			goto failed_irq; -		} -	} - -	fep->clk = clk_get(&pdev->dev, "fec_clk"); -	if (IS_ERR(fep->clk)) { -		ret = PTR_ERR(fep->clk); -		goto failed_clk; -	} -	clk_enable(fep->clk); - -	ret = fec_enet_init(ndev, 0); -	if (ret) -		goto failed_init; - -	ret = fec_enet_mii_init(pdev); -	if (ret) -		goto failed_mii_init; - -	/* Carrier starts down, phylib will bring it up */ -	netif_carrier_off(ndev); - -	ret = register_netdev(ndev); -	if (ret) -		goto failed_register; - -	return 0; - -failed_register: -	fec_enet_mii_remove(fep); -failed_mii_init: -failed_init: -	clk_disable(fep->clk); -	clk_put(fep->clk); -failed_clk: -	for (i = 0; i < 3; i++) { -		irq = platform_get_irq(pdev, i); -		if (irq > 0) -			free_irq(irq, ndev); -	} -failed_irq: -	iounmap((void __iomem *)ndev->base_addr); -failed_ioremap: -	free_netdev(ndev); - -	return ret; -} - -static int __devexit -fec_drv_remove(struct platform_device *pdev) -{ -	struct net_device *ndev = platform_get_drvdata(pdev); -	struct fec_enet_private *fep = netdev_priv(ndev); - -	platform_set_drvdata(pdev, NULL); - -	fec_stop(ndev); -	fec_enet_mii_remove(fep); -	clk_disable(fep->clk); -	clk_put(fep->clk); -	iounmap((void __iomem *)ndev->base_addr); -	unregister_netdev(ndev); -	free_netdev(ndev); -	return 0; -} - -#ifdef CONFIG_PM -static int -fec_suspend(struct device *dev) -{ -	struct net_device *ndev = dev_get_drvdata(dev); -	struct fec_enet_private *fep; - -	if (ndev) { -		fep = netdev_priv(ndev); -		if (netif_running(ndev)) -			fec_enet_close(ndev); -		clk_disable(fep->clk); -	} -	return 0; -} - -static int -fec_resume(struct device *dev) -{ -	struct net_device *ndev = dev_get_drvdata(dev); -	struct fec_enet_private *fep; - -	if (ndev) { -		fep = netdev_priv(ndev); -		clk_enable(fep->clk); -		if (netif_running(ndev)) -			fec_enet_open(ndev); -	} -	return 0; -} - -static const struct dev_pm_ops fec_pm_ops = { -	.suspend	= fec_suspend, -	.resume		= fec_resume, -	.freeze		= fec_suspend, -	.thaw		= fec_resume, -	.poweroff	= fec_suspend, -	.restore	= fec_resume, -}; -#endif - -static struct platform_driver fec_driver = { -	.driver	= { -		.name	= "fec", -		.owner	= THIS_MODULE, -#ifdef CONFIG_PM -		.pm	= &fec_pm_ops, -#endif -	}, -	.probe	= fec_probe, -	.remove	= __devexit_p(fec_drv_remove), -}; - -static int __init -fec_enet_module_init(void) -{ -	printk(KERN_INFO "FEC Ethernet Driver\n"); - -	return platform_driver_register(&fec_driver); -} - -static void __exit -fec_enet_cleanup(void) -{ -	platform_driver_unregister(&fec_driver); -} - -module_exit(fec_enet_cleanup); -module_init(fec_enet_module_init); - -MODULE_LICENSE("GPL");  | 
