diff options
Diffstat (limited to 'drivers/net/fec.c')
| -rw-r--r-- | drivers/net/fec.c | 2655 |
1 files changed, 0 insertions, 2655 deletions
diff --git a/drivers/net/fec.c b/drivers/net/fec.c deleted file mode 100644 index d7a3ea88edd..00000000000 --- a/drivers/net/fec.c +++ /dev/null @@ -1,2655 +0,0 @@ -/* - * Fast Ethernet Controller (FEC) driver for Motorola MPC8xx. - * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) - * - * This version of the driver is specific to the FADS implementation, - * since the board contains control registers external to the processor - * for the control of the LevelOne LXT970 transceiver. The MPC860T manual - * describes connections using the internal parallel port I/O, which - * is basically all of Port D. - * - * Right now, I am very wasteful with the buffers. I allocate memory - * pages and then divide them into 2K frame buffers. This way I know I - * have buffers large enough to hold one frame within one buffer descriptor. - * Once I get this working, I will use 64 or 128 byte CPM buffers, which - * will be much more memory efficient and will easily handle lots of - * small packets. - * - * Much better multiple PHY support by Magnus Damm. - * Copyright (c) 2000 Ericsson Radio Systems AB. - * - * Support for FEC controller of ColdFire processors. - * Copyright (c) 2001-2005 Greg Ungerer (gerg@snapgear.com) - * - * Bug fixes and cleanup by Philippe De Muyter (phdm@macqel.be) - * Copyright (c) 2004-2006 Macq Electronique SA. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/ptrace.h> -#include <linux/errno.h> -#include <linux/ioport.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/spinlock.h> -#include <linux/workqueue.h> -#include <linux/bitops.h> - -#include <asm/irq.h> -#include <asm/uaccess.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/cacheflush.h> - -#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || \ - defined(CONFIG_M5272) || defined(CONFIG_M528x) || \ - defined(CONFIG_M520x) || defined(CONFIG_M532x) -#include <asm/coldfire.h> -#include <asm/mcfsim.h> -#include "fec.h" -#else -#include <asm/8xx_immap.h> -#include <asm/mpc8xx.h> -#include "commproc.h" -#endif - -#if defined(CONFIG_FEC2) -#define FEC_MAX_PORTS 2 -#else -#define FEC_MAX_PORTS 1 -#endif - -/* - * Define the fixed address of the FEC hardware. - */ -static unsigned int fec_hw[] = { -#if defined(CONFIG_M5272) - (MCF_MBAR + 0x840), -#elif defined(CONFIG_M527x) - (MCF_MBAR + 0x1000), - (MCF_MBAR + 0x1800), -#elif defined(CONFIG_M523x) || defined(CONFIG_M528x) - (MCF_MBAR + 0x1000), -#elif defined(CONFIG_M520x) - (MCF_MBAR+0x30000), -#elif defined(CONFIG_M532x) - (MCF_MBAR+0xfc030000), -#else - &(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec), -#endif -}; - -static unsigned char fec_mac_default[] = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -}; - -/* - * Some hardware gets it MAC address out of local flash memory. - * if this is non-zero then assume it is the address to get MAC from. - */ -#if defined(CONFIG_NETtel) -#define FEC_FLASHMAC 0xf0006006 -#elif defined(CONFIG_GILBARCONAP) || defined(CONFIG_SCALES) -#define FEC_FLASHMAC 0xf0006000 -#elif defined(CONFIG_CANCam) -#define FEC_FLASHMAC 0xf0020000 -#elif defined (CONFIG_M5272C3) -#define FEC_FLASHMAC (0xffe04000 + 4) -#elif defined(CONFIG_MOD5272) -#define FEC_FLASHMAC 0xffc0406b -#else -#define FEC_FLASHMAC 0 -#endif - -/* Forward declarations of some structures to support different PHYs -*/ - -typedef struct { - uint mii_data; - void (*funct)(uint mii_reg, struct net_device *dev); -} phy_cmd_t; - -typedef struct { - uint id; - char *name; - - const phy_cmd_t *config; - const phy_cmd_t *startup; - const phy_cmd_t *ack_int; - const phy_cmd_t *shutdown; -} phy_info_t; - -/* The number of Tx and Rx buffers. These are allocated from the page - * pool. The code may assume these are power of two, so it it best - * to keep them that size. - * We don't need to allocate pages for the transmitter. We just use - * the skbuffer directly. - */ -#define FEC_ENET_RX_PAGES 8 -#define FEC_ENET_RX_FRSIZE 2048 -#define FEC_ENET_RX_FRPPG (PAGE_SIZE / FEC_ENET_RX_FRSIZE) -#define RX_RING_SIZE (FEC_ENET_RX_FRPPG * FEC_ENET_RX_PAGES) -#define FEC_ENET_TX_FRSIZE 2048 -#define FEC_ENET_TX_FRPPG (PAGE_SIZE / FEC_ENET_TX_FRSIZE) -#define TX_RING_SIZE 16 /* Must be power of two */ -#define TX_RING_MOD_MASK 15 /* for this to work */ - -#if (((RX_RING_SIZE + TX_RING_SIZE) * 8) > PAGE_SIZE) -#error "FEC: descriptor ring size constants too large" -#endif - -/* Interrupt events/masks. -*/ -#define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */ -#define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */ -#define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */ -#define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */ -#define FEC_ENET_TXF ((uint)0x08000000) /* Full frame transmitted */ -#define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */ -#define FEC_ENET_RXF ((uint)0x02000000) /* Full frame received */ -#define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */ -#define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */ -#define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */ - -/* The FEC stores dest/src/type, data, and checksum for receive packets. - */ -#define PKT_MAXBUF_SIZE 1518 -#define PKT_MINBUF_SIZE 64 -#define PKT_MAXBLR_SIZE 1520 - - -/* - * The 5270/5271/5280/5282/532x RX control register also contains maximum frame - * size bits. Other FEC hardware does not, so we need to take that into - * account when setting it. - */ -#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ - defined(CONFIG_M520x) || defined(CONFIG_M532x) -#define OPT_FRAME_SIZE (PKT_MAXBUF_SIZE << 16) -#else -#define OPT_FRAME_SIZE 0 -#endif - -/* The FEC buffer descriptors track the ring buffers. The rx_bd_base and - * tx_bd_base always point to the base of the buffer descriptors. The - * cur_rx and cur_tx point to the currently available buffer. - * The dirty_tx tracks the current buffer that is being sent by the - * controller. The cur_tx and dirty_tx are equal under both completely - * empty and completely full conditions. The empty/ready indicator in - * the buffer descriptor determines the actual condition. - */ -struct fec_enet_private { - /* Hardware registers of the FEC device */ - volatile fec_t *hwp; - - struct net_device *netdev; - - /* The saved address of a sent-in-place packet/buffer, for skfree(). */ - unsigned char *tx_bounce[TX_RING_SIZE]; - struct sk_buff* tx_skbuff[TX_RING_SIZE]; - ushort skb_cur; - ushort skb_dirty; - - /* CPM dual port RAM relative addresses. - */ - cbd_t *rx_bd_base; /* Address of Rx and Tx buffers. */ - cbd_t *tx_bd_base; - cbd_t *cur_rx, *cur_tx; /* The next free ring entry */ - cbd_t *dirty_tx; /* The ring entries to be free()ed. */ - uint tx_full; - spinlock_t lock; - - uint phy_id; - uint phy_id_done; - uint phy_status; - uint phy_speed; - phy_info_t const *phy; - struct work_struct phy_task; - - uint sequence_done; - uint mii_phy_task_queued; - - uint phy_addr; - - int index; - int opened; - int link; - int old_link; - int full_duplex; -}; - -static int fec_enet_open(struct net_device *dev); -static int fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev); -static void fec_enet_mii(struct net_device *dev); -static irqreturn_t fec_enet_interrupt(int irq, void * dev_id); -static void fec_enet_tx(struct net_device *dev); -static void fec_enet_rx(struct net_device *dev); -static int fec_enet_close(struct net_device *dev); -static void set_multicast_list(struct net_device *dev); -static void fec_restart(struct net_device *dev, int duplex); -static void fec_stop(struct net_device *dev); -static void fec_set_mac_address(struct net_device *dev); - - -/* MII processing. We keep this as simple as possible. Requests are - * placed on the list (if there is room). When the request is finished - * by the MII, an optional function may be called. - */ -typedef struct mii_list { - uint mii_regval; - void (*mii_func)(uint val, struct net_device *dev); - struct mii_list *mii_next; -} mii_list_t; - -#define NMII 20 -static mii_list_t mii_cmds[NMII]; -static mii_list_t *mii_free; -static mii_list_t *mii_head; -static mii_list_t *mii_tail; - -static int mii_queue(struct net_device *dev, int request, - void (*func)(uint, struct net_device *)); - -/* Make MII read/write commands for the FEC. -*/ -#define mk_mii_read(REG) (0x60020000 | ((REG & 0x1f) << 18)) -#define mk_mii_write(REG, VAL) (0x50020000 | ((REG & 0x1f) << 18) | \ - (VAL & 0xffff)) -#define mk_mii_end 0 - -/* Transmitter timeout. -*/ -#define TX_TIMEOUT (2*HZ) - -/* Register definitions for the PHY. -*/ - -#define MII_REG_CR 0 /* Control Register */ -#define MII_REG_SR 1 /* Status Register */ -#define MII_REG_PHYIR1 2 /* PHY Identification Register 1 */ -#define MII_REG_PHYIR2 3 /* PHY Identification Register 2 */ -#define MII_REG_ANAR 4 /* A-N Advertisement Register */ -#define MII_REG_ANLPAR 5 /* A-N Link Partner Ability Register */ -#define MII_REG_ANER 6 /* A-N Expansion Register */ -#define MII_REG_ANNPTR 7 /* A-N Next Page Transmit Register */ -#define MII_REG_ANLPRNPR 8 /* A-N Link Partner Received Next Page Reg. */ - -/* values for phy_status */ - -#define PHY_CONF_ANE 0x0001 /* 1 auto-negotiation enabled */ -#define PHY_CONF_LOOP 0x0002 /* 1 loopback mode enabled */ -#define PHY_CONF_SPMASK 0x00f0 /* mask for speed */ -#define PHY_CONF_10HDX 0x0010 /* 10 Mbit half duplex supported */ -#define PHY_CONF_10FDX 0x0020 /* 10 Mbit full duplex supported */ -#define PHY_CONF_100HDX 0x0040 /* 100 Mbit half duplex supported */ -#define PHY_CONF_100FDX 0x0080 /* 100 Mbit full duplex supported */ - -#define PHY_STAT_LINK 0x0100 /* 1 up - 0 down */ -#define PHY_STAT_FAULT 0x0200 /* 1 remote fault */ -#define PHY_STAT_ANC 0x0400 /* 1 auto-negotiation complete */ -#define PHY_STAT_SPMASK 0xf000 /* mask for speed */ -#define PHY_STAT_10HDX 0x1000 /* 10 Mbit half duplex selected */ -#define PHY_STAT_10FDX 0x2000 /* 10 Mbit full duplex selected */ -#define PHY_STAT_100HDX 0x4000 /* 100 Mbit half duplex selected */ -#define PHY_STAT_100FDX 0x8000 /* 100 Mbit full duplex selected */ - - -static int -fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct fec_enet_private *fep; - volatile fec_t *fecp; - volatile cbd_t *bdp; - unsigned short status; - - fep = netdev_priv(dev); - fecp = (volatile fec_t*)dev->base_addr; - - if (!fep->link) { - /* Link is down or autonegotiation is in progress. */ - return 1; - } - - /* Fill in a Tx ring entry */ - bdp = fep->cur_tx; - - status = bdp->cbd_sc; -#ifndef final_version - if (status & BD_ENET_TX_READY) { - /* Ooops. All transmit buffers are full. Bail out. - * This should not happen, since dev->tbusy should be set. - */ - printk("%s: tx queue full!.\n", dev->name); - return 1; - } -#endif - - /* Clear all of the status flags. - */ - status &= ~BD_ENET_TX_STATS; - - /* Set buffer length and buffer pointer. - */ - bdp->cbd_bufaddr = __pa(skb->data); - bdp->cbd_datlen = skb->len; - - /* - * On some FEC implementations data must be aligned on - * 4-byte boundaries. Use bounce buffers to copy data - * and get it aligned. Ugh. - */ - if (bdp->cbd_bufaddr & 0x3) { - unsigned int index; - index = bdp - fep->tx_bd_base; - memcpy(fep->tx_bounce[index], (void *) bdp->cbd_bufaddr, bdp->cbd_datlen); - bdp->cbd_bufaddr = __pa(fep->tx_bounce[index]); - } - - /* Save skb pointer. - */ - fep->tx_skbuff[fep->skb_cur] = skb; - - dev->stats.tx_bytes += skb->len; - fep->skb_cur = (fep->skb_cur+1) & TX_RING_MOD_MASK; - - /* Push the data cache so the CPM does not get stale memory - * data. - */ - flush_dcache_range((unsigned long)skb->data, - (unsigned long)skb->data + skb->len); - - spin_lock_irq(&fep->lock); - - /* Send it on its way. Tell FEC it's ready, interrupt when done, - * it's the last BD of the frame, and to put the CRC on the end. - */ - - status |= (BD_ENET_TX_READY | BD_ENET_TX_INTR - | BD_ENET_TX_LAST | BD_ENET_TX_TC); - bdp->cbd_sc = status; - - dev->trans_start = jiffies; - - /* Trigger transmission start */ - fecp->fec_x_des_active = 0; - - /* If this was the last BD in the ring, start at the beginning again. - */ - if (status & BD_ENET_TX_WRAP) { - bdp = fep->tx_bd_base; - } else { - bdp++; - } - - if (bdp == fep->dirty_tx) { - fep->tx_full = 1; - netif_stop_queue(dev); - } - - fep->cur_tx = (cbd_t *)bdp; - - spin_unlock_irq(&fep->lock); - - return 0; -} - -static void -fec_timeout(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - - printk("%s: transmit timed out.\n", dev->name); - dev->stats.tx_errors++; -#ifndef final_version - { - int i; - cbd_t *bdp; - - printk("Ring data dump: cur_tx %lx%s, dirty_tx %lx cur_rx: %lx\n", - (unsigned long)fep->cur_tx, fep->tx_full ? " (full)" : "", - (unsigned long)fep->dirty_tx, - (unsigned long)fep->cur_rx); - - bdp = fep->tx_bd_base; - printk(" tx: %u buffers\n", TX_RING_SIZE); - for (i = 0 ; i < TX_RING_SIZE; i++) { - printk(" %08x: %04x %04x %08x\n", - (uint) bdp, - bdp->cbd_sc, - bdp->cbd_datlen, - (int) bdp->cbd_bufaddr); - bdp++; - } - - bdp = fep->rx_bd_base; - printk(" rx: %lu buffers\n", (unsigned long) RX_RING_SIZE); - for (i = 0 ; i < RX_RING_SIZE; i++) { - printk(" %08x: %04x %04x %08x\n", - (uint) bdp, - bdp->cbd_sc, - bdp->cbd_datlen, - (int) bdp->cbd_bufaddr); - bdp++; - } - } -#endif - fec_restart(dev, fep->full_duplex); - netif_wake_queue(dev); -} - -/* The interrupt handler. - * This is called from the MPC core interrupt. - */ -static irqreturn_t -fec_enet_interrupt(int irq, void * dev_id) -{ - struct net_device *dev = dev_id; - volatile fec_t *fecp; - uint int_events; - int handled = 0; - - fecp = (volatile fec_t*)dev->base_addr; - - /* Get the interrupt events that caused us to be here. - */ - while ((int_events = fecp->fec_ievent) != 0) { - fecp->fec_ievent = int_events; - - /* Handle receive event in its own function. - */ - if (int_events & FEC_ENET_RXF) { - handled = 1; - fec_enet_rx(dev); - } - - /* Transmit OK, or non-fatal error. Update the buffer - descriptors. FEC handles all errors, we just discover - them as part of the transmit process. - */ - if (int_events & FEC_ENET_TXF) { - handled = 1; - fec_enet_tx(dev); - } - - if (int_events & FEC_ENET_MII) { - handled = 1; - fec_enet_mii(dev); - } - - } - return IRQ_RETVAL(handled); -} - - -static void -fec_enet_tx(struct net_device *dev) -{ - struct fec_enet_private *fep; - volatile cbd_t *bdp; - unsigned short status; - struct sk_buff *skb; - - fep = netdev_priv(dev); - spin_lock(&fep->lock); - bdp = fep->dirty_tx; - - while (((status = bdp->cbd_sc) & BD_ENET_TX_READY) == 0) { - if (bdp == fep->cur_tx && fep->tx_full == 0) break; - - skb = fep->tx_skbuff[fep->skb_dirty]; - /* Check for errors. */ - if (status & (BD_ENET_TX_HB | BD_ENET_TX_LC | - BD_ENET_TX_RL | BD_ENET_TX_UN | - BD_ENET_TX_CSL)) { - dev->stats.tx_errors++; - if (status & BD_ENET_TX_HB) /* No heartbeat */ - dev->stats.tx_heartbeat_errors++; - if (status & BD_ENET_TX_LC) /* Late collision */ - dev->stats.tx_window_errors++; - if (status & BD_ENET_TX_RL) /* Retrans limit */ - dev->stats.tx_aborted_errors++; - if (status & BD_ENET_TX_UN) /* Underrun */ - dev->stats.tx_fifo_errors++; - if (status & BD_ENET_TX_CSL) /* Carrier lost */ - dev->stats.tx_carrier_errors++; - } else { - dev->stats.tx_packets++; - } - -#ifndef final_version - if (status & BD_ENET_TX_READY) - printk("HEY! Enet xmit interrupt and TX_READY.\n"); -#endif - /* Deferred means some collisions occurred during transmit, - * but we eventually sent the packet OK. - */ - if (status & BD_ENET_TX_DEF) - dev->stats.collisions++; - - /* Free the sk buffer associated with this last transmit. - */ - dev_kfree_skb_any(skb); - fep->tx_skbuff[fep->skb_dirty] = NULL; - fep->skb_dirty = (fep->skb_dirty + 1) & TX_RING_MOD_MASK; - - /* Update pointer to next buffer descriptor to be transmitted. - */ - if (status & BD_ENET_TX_WRAP) - bdp = fep->tx_bd_base; - else - bdp++; - - /* Since we have freed up a buffer, the ring is no longer - * full. - */ - if (fep->tx_full) { - fep->tx_full = 0; - if (netif_queue_stopped(dev)) - netif_wake_queue(dev); - } - } - fep->dirty_tx = (cbd_t *)bdp; - spin_unlock(&fep->lock); -} - - -/* During a receive, the cur_rx points to the current incoming buffer. - * When we update through the ring, if the next incoming buffer has - * not been given to the system, we just set the empty indicator, - * effectively tossing the packet. - */ -static void -fec_enet_rx(struct net_device *dev) -{ - struct fec_enet_private *fep; - volatile fec_t *fecp; - volatile cbd_t *bdp; - unsigned short status; - struct sk_buff *skb; - ushort pkt_len; - __u8 *data; - -#ifdef CONFIG_M532x - flush_cache_all(); -#endif - - fep = netdev_priv(dev); - fecp = (volatile fec_t*)dev->base_addr; - - /* First, grab all of the stats for the incoming packet. - * These get messed up if we get called due to a busy condition. - */ - bdp = fep->cur_rx; - -while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) { - -#ifndef final_version - /* Since we have allocated space to hold a complete frame, - * the last indicator should be set. - */ - if ((status & BD_ENET_RX_LAST) == 0) - printk("FEC ENET: rcv is not +last\n"); -#endif - - if (!fep->opened) - goto rx_processing_done; - - /* Check for errors. */ - if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO | - BD_ENET_RX_CR | BD_ENET_RX_OV)) { - dev->stats.rx_errors++; - if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH)) { - /* Frame too long or too short. */ - dev->stats.rx_length_errors++; - } - if (status & BD_ENET_RX_NO) /* Frame alignment */ - dev->stats.rx_frame_errors++; - if (status & BD_ENET_RX_CR) /* CRC Error */ - dev->stats.rx_crc_errors++; - if (status & BD_ENET_RX_OV) /* FIFO overrun */ - dev->stats.rx_fifo_errors++; - } - - /* Report late collisions as a frame error. - * On this error, the BD is closed, but we don't know what we - * have in the buffer. So, just drop this frame on the floor. - */ - if (status & BD_ENET_RX_CL) { - dev->stats.rx_errors++; - dev->stats.rx_frame_errors++; - goto rx_processing_done; - } - - /* Process the incoming frame. - */ - dev->stats.rx_packets++; - pkt_len = bdp->cbd_datlen; - dev->stats.rx_bytes += pkt_len; - data = (__u8*)__va(bdp->cbd_bufaddr); - - /* This does 16 byte alignment, exactly what we need. - * The packet length includes FCS, but we don't want to - * include that when passing upstream as it messes up - * bridging applications. - */ - skb = dev_alloc_skb(pkt_len-4); - - if (skb == NULL) { - printk("%s: Memory squeeze, dropping packet.\n", dev->name); - dev->stats.rx_dropped++; - } else { - skb_put(skb,pkt_len-4); /* Make room */ - skb_copy_to_linear_data(skb, data, pkt_len-4); - skb->protocol=eth_type_trans(skb,dev); - netif_rx(skb); - } - rx_processing_done: - - /* Clear the status flags for this buffer. - */ - status &= ~BD_ENET_RX_STATS; - - /* Mark the buffer empty. - */ - status |= BD_ENET_RX_EMPTY; - bdp->cbd_sc = status; - - /* Update BD pointer to next entry. - */ - if (status & BD_ENET_RX_WRAP) - bdp = fep->rx_bd_base; - else - bdp++; - -#if 1 - /* Doing this here will keep the FEC running while we process - * incoming frames. On a heavily loaded network, we should be - * able to keep up at the expense of system resources. - */ - fecp->fec_r_des_active = 0; -#endif - } /* while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) */ - fep->cur_rx = (cbd_t *)bdp; - -#if 0 - /* Doing this here will allow us to process all frames in the - * ring before the FEC is allowed to put more there. On a heavily - * loaded network, some frames may be lost. Unfortunately, this - * increases the interrupt overhead since we can potentially work - * our way back to the interrupt return only to come right back - * here. - */ - fecp->fec_r_des_active = 0; -#endif -} - - -/* called from interrupt context */ -static void -fec_enet_mii(struct net_device *dev) -{ - struct fec_enet_private *fep; - volatile fec_t *ep; - mii_list_t *mip; - uint mii_reg; - - fep = netdev_priv(dev); - ep = fep->hwp; - mii_reg = ep->fec_mii_data; - - spin_lock(&fep->lock); - - if ((mip = mii_head) == NULL) { - printk("MII and no head!\n"); - goto unlock; - } - - if (mip->mii_func != NULL) - (*(mip->mii_func))(mii_reg, dev); - - mii_head = mip->mii_next; - mip->mii_next = mii_free; - mii_free = mip; - - if ((mip = mii_head) != NULL) - ep->fec_mii_data = mip->mii_regval; - -unlock: - spin_unlock(&fep->lock); -} - -static int -mii_queue(struct net_device *dev, int regval, void (*func)(uint, struct net_device *)) -{ - struct fec_enet_private *fep; - unsigned long flags; - mii_list_t *mip; - int retval; - - /* Add PHY address to register command. - */ - fep = netdev_priv(dev); - regval |= fep->phy_addr << 23; - - retval = 0; - - spin_lock_irqsave(&fep->lock,flags); - - if ((mip = mii_free) != NULL) { - mii_free = mip->mii_next; - mip->mii_regval = regval; - mip->mii_func = func; - mip->mii_next = NULL; - if (mii_head) { - mii_tail->mii_next = mip; - mii_tail = mip; - } else { - mii_head = mii_tail = mip; - fep->hwp->fec_mii_data = regval; - } - } else { - retval = 1; - } - - spin_unlock_irqrestore(&fep->lock,flags); - - return(retval); -} - -static void mii_do_cmd(struct net_device *dev, const phy_cmd_t *c) -{ - if(!c) - return; - - for (; c->mii_data != mk_mii_end; c++) - mii_queue(dev, c->mii_data, c->funct); -} - -static void mii_parse_sr(uint mii_reg, struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - volatile uint *s = &(fep->phy_status); - uint status; - - status = *s & ~(PHY_STAT_LINK | PHY_STAT_FAULT | PHY_STAT_ANC); - - if (mii_reg & 0x0004) - status |= PHY_STAT_LINK; - if (mii_reg & 0x0010) - status |= PHY_STAT_FAULT; - if (mii_reg & 0x0020) - status |= PHY_STAT_ANC; - *s = status; -} - -static void mii_parse_cr(uint mii_reg, struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - volatile uint *s = &(fep->phy_status); - uint status; - - status = *s & ~(PHY_CONF_ANE | PHY_CONF_LOOP); - - if (mii_reg & 0x1000) - status |= PHY_CONF_ANE; - if (mii_reg & 0x4000) - status |= PHY_CONF_LOOP; - *s = status; -} - -static void mii_parse_anar(uint mii_reg, struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - volatile uint *s = &(fep->phy_status); - uint status; - - status = *s & ~(PHY_CONF_SPMASK); - - if (mii_reg & 0x0020) - status |= PHY_CONF_10HDX; - if (mii_reg & 0x0040) - status |= PHY_CONF_10FDX; - if (mii_reg & 0x0080) - status |= PHY_CONF_100HDX; - if (mii_reg & 0x00100) - status |= PHY_CONF_100FDX; - *s = status; -} - -/* ------------------------------------------------------------------------- */ -/* The Level one LXT970 is used by many boards */ - -#define MII_LXT970_MIRROR 16 /* Mirror register */ -#define MII_LXT970_IER 17 /* Interrupt Enable Register */ -#define MII_LXT970_ISR 18 /* Interrupt Status Register */ -#define MII_LXT970_CONFIG 19 /* Configuration Register */ -#define MII_LXT970_CSR 20 /* Chip Status Register */ - -static void mii_parse_lxt970_csr(uint mii_reg, struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - volatile uint *s = &(fep->phy_status); - uint status; - - status = *s & ~(PHY_STAT_SPMASK); - if (mii_reg & 0x0800) { - if (mii_reg & 0x1000) - status |= PHY_STAT_100FDX; - else - status |= PHY_STAT_100HDX; - } else { - if (mii_reg & 0x1000) - status |= PHY_STAT_10FDX; - else - status |= PHY_STAT_10HDX; - } - *s = status; -} - -static phy_cmd_t const phy_cmd_lxt970_config[] = { - { mk_mii_read(MII_REG_CR), mii_parse_cr }, - { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, - { mk_mii_end, } - }; -static phy_cmd_t const phy_cmd_lxt970_startup[] = { /* enable interrupts */ - { mk_mii_write(MII_LXT970_IER, 0x0002), NULL }, - { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ - { mk_mii_end, } - }; -static phy_cmd_t const phy_cmd_lxt970_ack_int[] = { - /* read SR and ISR to acknowledge */ - { mk_mii_read(MII_REG_SR), mii_parse_sr }, - { mk_mii_read(MII_LXT970_ISR), NULL }, - - /* find out the current status */ - { mk_mii_read(MII_LXT970_CSR), mii_parse_lxt970_csr }, - { mk_mii_end, } - }; -static phy_cmd_t const phy_cmd_lxt970_shutdown[] = { /* disable interrupts */ - { mk_mii_write(MII_LXT970_IER, 0x0000), NULL }, - { mk_mii_end, } - }; -static phy_info_t const phy_info_lxt970 = { - .id = 0x07810000, - .name = "LXT970", - .config = phy_cmd_lxt970_config, - .startup = phy_cmd_lxt970_startup, - .ack_int = phy_cmd_lxt970_ack_int, - .shutdown = phy_cmd_lxt970_shutdown -}; - -/* ------------------------------------------------------------------------- */ -/* The Level one LXT971 is used on some of my custom boards */ - -/* register definitions for the 971 */ - -#define MII_LXT971_PCR 16 /* Port Control Register */ -#define MII_LXT971_SR2 17 /* Status Register 2 */ -#define MII_LXT971_IER 18 /* Interrupt Enable Register */ -#define MII_LXT971_ISR 19 /* Interrupt Status Register */ -#define MII_LXT971_LCR 20 /* LED Control Register */ -#define MII_LXT971_TCR 30 /* Transmit Control Register */ - -/* - * I had some nice ideas of running the MDIO faster... - * The 971 should support 8MHz and I tried it, but things acted really - * weird, so 2.5 MHz ought to be enough for anyone... - */ - -static void mii_parse_lxt971_sr2(uint mii_reg, struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - volatile uint *s = &(fep->phy_status); - uint status; - - status = *s & ~(PHY_STAT_SPMASK | PHY_STAT_LINK | PHY_STAT_ANC); - - if (mii_reg & 0x0400) { - fep->link = 1; - status |= PHY_STAT_LINK; - } else { - fep->link = 0; - } - if (mii_reg & 0x0080) - status |= PHY_STAT_ANC; - if (mii_reg & 0x4000) { - if (mii_reg & 0x0200) - status |= PHY_STAT_100FDX; - else - status |= PHY_STAT_100HDX; - } else { - if (mii_reg & 0x0200) - status |= PHY_STAT_10FDX; - else - status |= PHY_STAT_10HDX; - } - if (mii_reg & 0x0008) - status |= PHY_STAT_FAULT; - - *s = status; -} - -static phy_cmd_t const phy_cmd_lxt971_config[] = { - /* limit to 10MBit because my prototype board - * doesn't work with 100. */ - { mk_mii_read(MII_REG_CR), mii_parse_cr }, - { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, - { mk_mii_read(MII_LXT971_SR2), mii_parse_lxt971_sr2 }, - { mk_mii_end, } - }; -static phy_cmd_t const phy_cmd_lxt971_startup[] = { /* enable interrupts */ - { mk_mii_write(MII_LXT971_IER, 0x00f2), NULL }, - { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ - { mk_mii_write(MII_LXT971_LCR, 0xd422), NULL }, /* LED config */ - /* Somehow does the 971 tell me that the link is down - * the first read after power-up. - * read here to get a valid value in ack_int */ - { mk_mii_read(MII_REG_SR), mii_parse_sr }, - { mk_mii_end, } - }; -static phy_cmd_t const phy_cmd_lxt971_ack_int[] = { - /* acknowledge the int before reading status ! */ - { mk_mii_read(MII_LXT971_ISR), NULL }, - /* find out the current status */ - { mk_mii_read(MII_REG_SR), mii_parse_sr }, - { mk_mii_read(MII_LXT971_SR2), mii_parse_lxt971_sr2 }, - { mk_mii_end, } - }; -static phy_cmd_t const phy_cmd_lxt971_shutdown[] = { /* disable interrupts */ - { mk_mii_write(MII_LXT971_IER, 0x0000), NULL }, - { mk_mii_end, } - }; -static phy_info_t const phy_info_lxt971 = { - .id = 0x0001378e, - .name = "LXT971", - .config = phy_cmd_lxt971_config, - .startup = phy_cmd_lxt971_startup, - .ack_int = phy_cmd_lxt971_ack_int, - .shutdown = phy_cmd_lxt971_shutdown -}; - -/* ------------------------------------------------------------------------- */ -/* The Quality Semiconductor QS6612 is used on the RPX CLLF */ - -/* register definitions */ - -#define MII_QS6612_MCR 17 /* Mode Control Register */ -#define MII_QS6612_FTR 27 /* Factory Test Register */ -#define MII_QS6612_MCO 28 /* Misc. Control Register */ -#define MII_QS6612_ISR 29 /* Interrupt Source Register */ -#define MII_QS6612_IMR 30 /* Interrupt Mask Register */ -#define MII_QS6612_PCR 31 /* 100BaseTx PHY Control Reg. */ - -static void mii_parse_qs6612_pcr(uint mii_reg, struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - volatile uint *s = &(fep->phy_status); - uint status; - - status = *s & ~(PHY_STAT_SPMASK); - - switch((mii_reg >> 2) & 7) { - case 1: status |= PHY_STAT_10HDX; break; - case 2: status |= PHY_STAT_100HDX; break; - case 5: status |= PHY_STAT_10FDX; break; - case 6: status |= PHY_STAT_100FDX; break; -} - - *s = status; -} - -static phy_cmd_t const phy_cmd_qs6612_config[] = { - /* The PHY powers up isolated on the RPX, - * so send a command to allow operation. - */ - { mk_mii_write(MII_QS6612_PCR, 0x0dc0), NULL }, - - /* parse cr and anar to get some info */ - { mk_mii_read(MII_REG_CR), mii_parse_cr }, - { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, - { mk_mii_end, } - }; -static phy_cmd_t const phy_cmd_qs6612_startup[] = { /* enable interrupts */ - { mk_mii_write(MII_QS6612_IMR, 0x003a), NULL }, - { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ - { mk_mii_end, } - }; -static phy_cmd_t const phy_cmd_qs6612_ack_int[] = { - /* we need to read ISR, SR and ANER to acknowledge */ - { mk_mii_read(MII_QS6612_ISR), NULL }, - { mk_mii_read(MII_REG_SR), mii_parse_sr }, - { mk_mii_read(MII_REG_ANER), NULL }, - - /* read pcr to get info */ - { mk_mii_read(MII_QS6612_PCR), mii_parse_qs6612_pcr }, - { mk_mii_end, } - }; -static phy_cmd_t const phy_cmd_qs6612_shutdown[] = { /* disable interrupts */ - { mk_mii_write(MII_QS6612_IMR, 0x0000), NULL }, - { mk_mii_end, } - }; -static phy_info_t const phy_info_qs6612 = { - .id = 0x00181440, - .name = "QS6612", - .config = phy_cmd_qs6612_config, - .startup = phy_cmd_qs6612_startup, - .ack_int = phy_cmd_qs6612_ack_int, - .shutdown = phy_cmd_qs6612_shutdown -}; - -/* ------------------------------------------------------------------------- */ -/* AMD AM79C874 phy */ - -/* register definitions for the 874 */ - -#define MII_AM79C874_MFR 16 /* Miscellaneous Feature Register */ -#define MII_AM79C874_ICSR 17 /* Interrupt/Status Register */ -#define MII_AM79C874_DR 18 /* Diagnostic Register */ -#define MII_AM79C874_PMLR 19 /* Power and Loopback Register */ -#define MII_AM79C874_MCR 21 /* ModeControl Register */ -#define MII_AM79C874_DC 23 /* Disconnect Counter */ -#define MII_AM79C874_REC 24 /* Recieve Error Counter */ - -static void mii_parse_am79c874_dr(uint mii_reg, struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - volatile uint *s = &(fep->phy_status); - uint status; - - status = *s & ~(PHY_STAT_SPMASK | PHY_STAT_ANC); - - if (mii_reg & 0x0080) - status |= PHY_STAT_ANC; - if (mii_reg & 0x0400) - status |= ((mii_reg & 0x0800) ? PHY_STAT_100FDX : PHY_STAT_100HDX); - else - status |= ((mii_reg & 0x0800) ? PHY_STAT_10FDX : PHY_STAT_10HDX); - - *s = status; -} - -static phy_cmd_t const phy_cmd_am79c874_config[] = { - { mk_mii_read(MII_REG_CR), mii_parse_cr }, - { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, - { mk_mii_read(MII_AM79C874_DR), mii_parse_am79c874_dr }, - { mk_mii_end, } - }; -static phy_cmd_t const phy_cmd_am79c874_startup[] = { /* enable interrupts */ - { mk_mii_write(MII_AM79C874_ICSR, 0xff00), NULL }, - { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ - { mk_mii_read(MII_REG_SR), mii_parse_sr }, - { mk_mii_end, } - }; -static phy_cmd_t const phy_cmd_am79c874_ack_int[] = { - /* find out the current status */ - { mk_mii_read(MII_REG_SR), mii_parse_sr }, - { mk_mii_read(MII_AM79C874_DR), mii_parse_am79c874_dr }, - /* we only need to read ISR to acknowledge */ - { mk_mii_read(MII_AM79C874_ICSR), NULL }, - { mk_mii_end, } - }; -static phy_cmd_t const phy_cmd_am79c874_shutdown[] = { /* disable interrupts */ - { mk_mii_write(MII_AM79C874_ICSR, 0x0000), NULL }, - { mk_mii_end, } - }; -static phy_info_t const phy_info_am79c874 = { - .id = 0x00022561, - .name = "AM79C874", - .config = phy_cmd_am79c874_config, - .startup = phy_cmd_am79c874_startup, - .ack_int = phy_cmd_am79c874_ack_int, - .shutdown = phy_cmd_am79c874_shutdown -}; - - -/* ------------------------------------------------------------------------- */ -/* Kendin KS8721BL phy */ - -/* register definitions for the 8721 */ - -#define MII_KS8721BL_RXERCR 21 -#define MII_KS8721BL_ICSR 22 -#define MII_KS8721BL_PHYCR 31 - -static phy_cmd_t const phy_cmd_ks8721bl_config[] = { - { mk_mii_read(MII_REG_CR), mii_parse_cr }, - { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, - { mk_mii_end, } - }; -static phy_cmd_t const phy_cmd_ks8721bl_startup[] = { /* enable interrupts */ - { mk_mii_write(MII_KS8721BL_ICSR, 0xff00), NULL }, - { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ - { mk_mii_read(MII_REG_SR), mii_parse_sr }, - { mk_mii_end, } - }; -static phy_cmd_t const phy_cmd_ks8721bl_ack_int[] = { - /* find out the current status */ - { mk_mii_read(MII_REG_SR), mii_parse_sr }, - /* we only need to read ISR to acknowledge */ - { mk_mii_read(MII_KS8721BL_ICSR), NULL }, - { mk_mii_end, } - }; -static phy_cmd_t const phy_cmd_ks8721bl_shutdown[] = { /* disable interrupts */ - { mk_mii_write(MII_KS8721BL_ICSR, 0x0000), NULL }, - { mk_mii_end, } - }; -static phy_info_t const phy_info_ks8721bl = { - .id = 0x00022161, - .name = "KS8721BL", - .config = phy_cmd_ks8721bl_config, - .startup = phy_cmd_ks8721bl_startup, - .ack_int = phy_cmd_ks8721bl_ack_int, - .shutdown = phy_cmd_ks8721bl_shutdown -}; - -/* ------------------------------------------------------------------------- */ -/* register definitions for the DP83848 */ - -#define MII_DP8384X_PHYSTST 16 /* PHY Status Register */ - -static void mii_parse_dp8384x_sr2(uint mii_reg, struct net_device *dev) -{ - struct fec_enet_private *fep = dev->priv; - volatile uint *s = &(fep->phy_status); - - *s &= ~(PHY_STAT_SPMASK | PHY_STAT_LINK | PHY_STAT_ANC); - - /* Link up */ - if (mii_reg & 0x0001) { - fep->link = 1; - *s |= PHY_STAT_LINK; - } else - fep->link = 0; - /* Status of link */ - if (mii_reg & 0x0010) /* Autonegotioation complete */ - *s |= PHY_STAT_ANC; - if (mii_reg & 0x0002) { /* 10MBps? */ - if (mii_reg & 0x0004) /* Full Duplex? */ - *s |= PHY_STAT_10FDX; - else - *s |= PHY_STAT_10HDX; - } else { /* 100 Mbps? */ - if (mii_reg & 0x0004) /* Full Duplex? */ - *s |= PHY_STAT_100FDX; - else - *s |= PHY_STAT_100HDX; - } - if (mii_reg & 0x0008) - *s |= PHY_STAT_FAULT; -} - -static phy_info_t phy_info_dp83848= { - 0x020005c9, - "DP83848", - - (const phy_cmd_t []) { /* config */ - { mk_mii_read(MII_REG_CR), mii_parse_cr }, - { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, - { mk_mii_read(MII_DP8384X_PHYSTST), mii_parse_dp8384x_sr2 }, - { mk_mii_end, } - }, - (const phy_cmd_t []) { /* startup - enable interrupts */ - { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ - { mk_mii_read(MII_REG_SR), mii_parse_sr }, - { mk_mii_end, } - }, - (const phy_cmd_t []) { /* ack_int - never happens, no interrupt */ - { mk_mii_end, } - }, - (const phy_cmd_t []) { /* shutdown */ - { mk_mii_end, } - }, -}; - -/* ------------------------------------------------------------------------- */ - -static phy_info_t const * const phy_info[] = { - &phy_info_lxt970, - &phy_info_lxt971, - &phy_info_qs6612, - &phy_info_am79c874, - &phy_info_ks8721bl, - &phy_info_dp83848, - NULL -}; - -/* ------------------------------------------------------------------------- */ -#if !defined(CONFIG_M532x) -#ifdef CONFIG_RPXCLASSIC -static void -mii_link_interrupt(void *dev_id); -#else -static irqreturn_t -mii_link_interrupt(int irq, void * dev_id); -#endif -#endif - -#if defined(CONFIG_M5272) -/* - * Code specific to Coldfire 5272 setup. - */ -static void __inline__ fec_request_intrs(struct net_device *dev) -{ - volatile unsigned long *icrp; - static const struct idesc { - char *name; - unsigned short irq; - irq_handler_t handler; - } *idp, id[] = { - { "fec(RX)", 86, fec_enet_interrupt }, - { "fec(TX)", 87, fec_enet_interrupt }, - { "fec(OTHER)", 88, fec_enet_interrupt }, - { "fec(MII)", 66, mii_link_interrupt }, - { NULL }, - }; - - /* Setup interrupt handlers. */ - for (idp = id; idp->name; idp++) { - if (request_irq(idp->irq, idp->handler, IRQF_DISABLED, idp->name, dev) != 0) - printk("FEC: Could not allocate %s IRQ(%d)!\n", idp->name, idp->irq); - } - - /* Unmask interrupt at ColdFire 5272 SIM */ - icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR3); - *icrp = 0x00000ddd; - icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); - *icrp = 0x0d000000; -} - -static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep) -{ - volatile fec_t *fecp; - - fecp = fep->hwp; - fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04; - fecp->fec_x_cntrl = 0x00; - - /* - * Set MII speed to 2.5 MHz - * See 5272 manual section 11.5.8: MSCR - */ - fep->phy_speed = ((((MCF_CLK / 4) / (2500000 / 10)) + 5) / 10) * 2; - fecp->fec_mii_speed = fep->phy_speed; - - fec_restart(dev, 0); -} - -static void __inline__ fec_get_mac(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - volatile fec_t *fecp; - unsigned char *iap, tmpaddr[ETH_ALEN]; - - fecp = fep->hwp; - - if (FEC_FLASHMAC) { - /* - * Get MAC address from FLASH. - * If it is all 1's or 0's, use the default. - */ - iap = (unsigned char *)FEC_FLASHMAC; - if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) && - (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0)) - iap = fec_mac_default; - if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) && - (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff)) - iap = fec_mac_default; - } else { - *((unsigned long *) &tmpaddr[0]) = fecp->fec_addr_low; - *((unsigned short *) &tmpaddr[4]) = (fecp->fec_addr_high >> 16); - iap = &tmpaddr[0]; - } - - memcpy(dev->dev_addr, iap, ETH_ALEN); - - /* Adjust MAC if using default MAC address */ - if (iap == fec_mac_default) - dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index; -} - -static void __inline__ fec_enable_phy_intr(void) -{ -} - -static void __inline__ fec_disable_phy_intr(void) -{ - volatile unsigned long *icrp; - icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); - *icrp = 0x08000000; -} - -static void __inline__ fec_phy_ack_intr(void) -{ - volatile unsigned long *icrp; - /* Acknowledge the interrupt */ - icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); - *icrp = 0x0d000000; -} - -static void __inline__ fec_localhw_setup(void) -{ -} - -/* - * Do not need to make region uncached on 5272. - */ -static void __inline__ fec_uncache(unsigned long addr) -{ -} - -/* ------------------------------------------------------------------------- */ - -#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) - -/* - * Code specific to Coldfire 5230/5231/5232/5234/5235, - * the 5270/5271/5274/5275 and 5280/5282 setups. - */ -static void __inline__ fec_request_intrs(struct net_device *dev) -{ - struct fec_enet_private *fep; - int b; - static const struct idesc { - char *name; - unsigned short irq; - } *idp, id[] = { - { "fec(TXF)", 23 }, - { "fec(TXB)", 24 }, - { "fec(TXFIFO)", 25 }, - { "fec(TXCR)", 26 }, - { "fec(RXF)", 27 }, - { "fec(RXB)", 28 }, - { "fec(MII)", 29 }, - { "fec(LC)", 30 }, - { "fec(HBERR)", 31 }, - { "fec(GRA)", 32 }, - { "fec(EBERR)", 33 }, - { "fec(BABT)", 34 }, - { "fec(BABR)", 35 }, - { NULL }, - }; - - fep = netdev_priv(dev); - b = (fep->index) ? 128 : 64; - - /* Setup interrupt handlers. */ - for (idp = id; idp->name; idp++) { - if (request_irq(b+idp->irq, fec_enet_interrupt, IRQF_DISABLED, idp->name, dev) != 0) - printk("FEC: Could not allocate %s IRQ(%d)!\n", idp->name, b+idp->irq); - } - - /* Unmask interrupts at ColdFire 5280/5282 interrupt controller */ - { - volatile unsigned char *icrp; - volatile unsigned long *imrp; - int i, ilip; - - b = (fep->index) ? MCFICM_INTC1 : MCFICM_INTC0; - icrp = (volatile unsigned char *) (MCF_IPSBAR + b + - MCFINTC_ICR0); - for (i = 23, ilip = 0x28; (i < 36); i++) - icrp[i] = ilip--; - - imrp = (volatile unsigned long *) (MCF_IPSBAR + b + - MCFINTC_IMRH); - *imrp &= ~0x0000000f; - imrp = (volatile unsigned long *) (MCF_IPSBAR + b + - MCFINTC_IMRL); - *imrp &= ~0xff800001; - } - -#if defined(CONFIG_M528x) - /* Set up gpio outputs for MII lines */ - { - volatile u16 *gpio_paspar; - volatile u8 *gpio_pehlpar; - - gpio_paspar = (volatile u16 *) (MCF_IPSBAR + 0x100056); - gpio_pehlpar = (volatile u16 *) (MCF_IPSBAR + 0x100058); - *gpio_paspar |= 0x0f00; - *gpio_pehlpar = 0xc0; - } -#endif - -#if defined(CONFIG_M527x) - /* Set up gpio outputs for MII lines */ - { - volatile u8 *gpio_par_fec; - volatile u16 *gpio_par_feci2c; - - gpio_par_feci2c = (volatile u16 *)(MCF_IPSBAR + 0x100082); - /* Set up gpio outputs for FEC0 MII lines */ - gpio_par_fec = (volatile u8 *)(MCF_IPSBAR + 0x100078); - - *gpio_par_feci2c |= 0x0f00; - *gpio_par_fec |= 0xc0; - -#if defined(CONFIG_FEC2) - /* Set up gpio outputs for FEC1 MII lines */ - gpio_par_fec = (volatile u8 *)(MCF_IPSBAR + 0x100079); - - *gpio_par_feci2c |= 0x00a0; - *gpio_par_fec |= 0xc0; -#endif /* CONFIG_FEC2 */ - } -#endif /* CONFIG_M527x */ -} - -static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep) -{ - volatile fec_t *fecp; - - fecp = fep->hwp; - fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04; - fecp->fec_x_cntrl = 0x00; - - /* - * Set MII speed to 2.5 MHz - * See 5282 manual section 17.5.4.7: MSCR - */ - fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2; - fecp->fec_mii_speed = fep->phy_speed; - - fec_restart(dev, 0); -} - -static void __inline__ fec_get_mac(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - volatile fec_t *fecp; - unsigned char *iap, tmpaddr[ETH_ALEN]; - - fecp = fep->hwp; - - if (FEC_FLASHMAC) { - /* - * Get MAC address from FLASH. - * If it is all 1's or 0's, use the default. - */ - iap = FEC_FLASHMAC; - if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) && - (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0)) - iap = fec_mac_default; - if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) && - (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff)) - iap = fec_mac_default; - } else { - *((unsigned long *) &tmpaddr[0]) = fecp->fec_addr_low; - *((unsigned short *) &tmpaddr[4]) = (fecp->fec_addr_high >> 16); - iap = &tmpaddr[0]; - } - - memcpy(dev->dev_addr, iap, ETH_ALEN); - - /* Adjust MAC if using default MAC address */ - if (iap == fec_mac_default) - dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index; -} - -static void __inline__ fec_enable_phy_intr(void) -{ -} - -static void __inline__ fec_disable_phy_intr(void) -{ -} - -static void __inline__ fec_phy_ack_intr(void) -{ -} - -static void __inline__ fec_localhw_setup(void) -{ -} - -/* - * Do not need to make region uncached on 5272. - */ -static void __inline__ fec_uncache(unsigned long addr) -{ -} - -/* ------------------------------------------------------------------------- */ - -#elif defined(CONFIG_M520x) - -/* - * Code specific to Coldfire 520x - */ -static void __inline__ fec_request_intrs(struct net_device *dev) -{ - struct fec_enet_private *fep; - int b; - static const struct idesc { - char *name; - unsigned short irq; - } *idp, id[] = { - { "fec(TXF)", 23 }, - { "fec(TXB)", 24 }, - { "fec(TXFIFO)", 25 }, - { "fec(TXCR)", 26 }, - { "fec(RXF)", 27 }, - { "fec(RXB)", 28 }, - { "fec(MII)", 29 }, - { "fec(LC)", 30 }, - { "fec(HBERR)", 31 }, - { "fec(GRA)", 32 }, - { "fec(EBERR)", 33 }, - { "fec(BABT)", 34 }, - { "fec(BABR)", 35 }, - { NULL }, - }; - - fep = netdev_priv(dev); - b = 64 + 13; - - /* Setup interrupt handlers. */ - for (idp = id; idp->name; idp++) { - if (request_irq(b+idp->irq, fec_enet_interrupt, IRQF_DISABLED, idp->name,dev) != 0) - printk("FEC: Could not allocate %s IRQ(%d)!\n", idp->name, b+idp->irq); - } - - /* Unmask interrupts at ColdFire interrupt controller */ - { - volatile unsigned char *icrp; - volatile unsigned long *imrp; - - icrp = (volatile unsigned char *) (MCF_IPSBAR + MCFICM_INTC0 + - MCFINTC_ICR0); - for (b = 36; (b < 49); b++) - icrp[b] = 0x04; - imrp = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + - MCFINTC_IMRH); - *imrp &= ~0x0001FFF0; - } - *(volatile unsigned char *)(MCF_IPSBAR + MCF_GPIO_PAR_FEC) |= 0xf0; - *(volatile unsigned char *)(MCF_IPSBAR + MCF_GPIO_PAR_FECI2C) |= 0x0f; -} - -static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep) -{ - volatile fec_t *fecp; - - fecp = fep->hwp; - fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04; - fecp->fec_x_cntrl = 0x00; - - /* - * Set MII speed to 2.5 MHz - * See 5282 manual section 17.5.4.7: MSCR - */ - fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2; - fecp->fec_mii_speed = fep->phy_speed; - - fec_restart(dev, 0); -} - -static void __inline__ fec_get_mac(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - volatile fec_t *fecp; - unsigned char *iap, tmpaddr[ETH_ALEN]; - - fecp = fep->hwp; - - if (FEC_FLASHMAC) { - /* - * Get MAC address from FLASH. - * If it is all 1's or 0's, use the default. - */ - iap = FEC_FLASHMAC; - if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) && - (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0)) - iap = fec_mac_default; - if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) && - (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff)) - iap = fec_mac_default; - } else { - *((unsigned long *) &tmpaddr[0]) = fecp->fec_addr_low; - *((unsigned short *) &tmpaddr[4]) = (fecp->fec_addr_high >> 16); - iap = &tmpaddr[0]; - } - - memcpy(dev->dev_addr, iap, ETH_ALEN); - - /* Adjust MAC if using default MAC address */ - if (iap == fec_mac_default) - dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index; -} - -static void __inline__ fec_enable_phy_intr(void) -{ -} - -static void __inline__ fec_disable_phy_intr(void) -{ -} - -static void __inline__ fec_phy_ack_intr(void) -{ -} - -static void __inline__ fec_localhw_setup(void) -{ -} - -static void __inline__ fec_uncache(unsigned long addr) -{ -} - -/* ------------------------------------------------------------------------- */ - -#elif defined(CONFIG_M532x) -/* - * Code specific for M532x - */ -static void __inline__ fec_request_intrs(struct net_device *dev) -{ - struct fec_enet_private *fep; - int b; - static const struct idesc { - char *name; - unsigned short irq; - } *idp, id[] = { - { "fec(TXF)", 36 }, - { "fec(TXB)", 37 }, - { "fec(TXFIFO)", 38 }, - { "fec(TXCR)", 39 }, - { "fec(RXF)", 40 }, - { "fec(RXB)", 41 }, - { "fec(MII)", 42 }, - { "fec(LC)", 43 }, - { "fec(HBERR)", 44 }, - { "fec(GRA)", 45 }, - { "fec(EBERR)", 46 }, - { "fec(BABT)", 47 }, - { "fec(BABR)", 48 }, - { NULL }, - }; - - fep = netdev_priv(dev); - b = (fep->index) ? 128 : 64; - - /* Setup interrupt handlers. */ - for (idp = id; idp->name; idp++) { - if (request_irq(b+idp->irq, fec_enet_interrupt, IRQF_DISABLED, idp->name,dev) != 0) - printk("FEC: Could not allocate %s IRQ(%d)!\n", - idp->name, b+idp->irq); - } - - /* Unmask interrupts */ - MCF_INTC0_ICR36 = 0x2; - MCF_INTC0_ICR37 = 0x2; - MCF_INTC0_ICR38 = 0x2; - MCF_INTC0_ICR39 = 0x2; - MCF_INTC0_ICR40 = 0x2; - MCF_INTC0_ICR41 = 0x2; - MCF_INTC0_ICR42 = 0x2; - MCF_INTC0_ICR43 = 0x2; - MCF_INTC0_ICR44 = 0x2; - MCF_INTC0_ICR45 = 0x2; - MCF_INTC0_ICR46 = 0x2; - MCF_INTC0_ICR47 = 0x2; - MCF_INTC0_ICR48 = 0x2; - - MCF_INTC0_IMRH &= ~( - MCF_INTC_IMRH_INT_MASK36 | - MCF_INTC_IMRH_INT_MASK37 | - MCF_INTC_IMRH_INT_MASK38 | - MCF_INTC_IMRH_INT_MASK39 | - MCF_INTC_IMRH_INT_MASK40 | - MCF_INTC_IMRH_INT_MASK41 | - MCF_INTC_IMRH_INT_MASK42 | - MCF_INTC_IMRH_INT_MASK43 | - MCF_INTC_IMRH_INT_MASK44 | - MCF_INTC_IMRH_INT_MASK45 | - MCF_INTC_IMRH_INT_MASK46 | - MCF_INTC_IMRH_INT_MASK47 | - MCF_INTC_IMRH_INT_MASK48 ); - - /* Set up gpio outputs for MII lines */ - MCF_GPIO_PAR_FECI2C |= (0 | - MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC | - MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO); - MCF_GPIO_PAR_FEC = (0 | - MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC | - MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC); -} - -static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep) -{ - volatile fec_t *fecp; - - fecp = fep->hwp; - fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04; - fecp->fec_x_cntrl = 0x00; - - /* - * Set MII speed to 2.5 MHz - */ - fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2; - fecp->fec_mii_speed = fep->phy_speed; - - fec_restart(dev, 0); -} - -static void __inline__ fec_get_mac(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - volatile fec_t *fecp; - unsigned char *iap, tmpaddr[ETH_ALEN]; - - fecp = fep->hwp; - - if (FEC_FLASHMAC) { - /* - * Get MAC address from FLASH. - * If it is all 1's or 0's, use the default. - */ - iap = FEC_FLASHMAC; - if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) && - (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0)) - iap = fec_mac_default; - if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) && - (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff)) - iap = fec_mac_default; - } else { - *((unsigned long *) &tmpaddr[0]) = fecp->fec_addr_low; - *((unsigned short *) &tmpaddr[4]) = (fecp->fec_addr_high >> 16); - iap = &tmpaddr[0]; - } - - memcpy(dev->dev_addr, iap, ETH_ALEN); - - /* Adjust MAC if using default MAC address */ - if (iap == fec_mac_default) - dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index; -} - -static void __inline__ fec_enable_phy_intr(void) -{ -} - -static void __inline__ fec_disable_phy_intr(void) -{ -} - -static void __inline__ fec_phy_ack_intr(void) -{ -} - -static void __inline__ fec_localhw_setup(void) -{ -} - -/* - * Do not need to make region uncached on 532x. - */ -static void __inline__ fec_uncache(unsigned long addr) -{ -} - -/* ------------------------------------------------------------------------- */ - - -#else - -/* - * Code specific to the MPC860T setup. - */ -static void __inline__ fec_request_intrs(struct net_device *dev) -{ - volatile immap_t *immap; - - immap = (immap_t *)IMAP_ADDR; /* pointer to internal registers */ - - if (request_8xxirq(FEC_INTERRUPT, fec_enet_interrupt, 0, "fec", dev) != 0) - panic("Could not allocate FEC IRQ!"); - -#ifdef CONFIG_RPXCLASSIC - /* Make Port C, bit 15 an input that causes interrupts. - */ - immap->im_ioport.iop_pcpar &= ~0x0001; - immap->im_ioport.iop_pcdir &= ~0x0001; - immap->im_ioport.iop_pcso &= ~0x0001; - immap->im_ioport.iop_pcint |= 0x0001; - cpm_install_handler(CPMVEC_PIO_PC15, mii_link_interrupt, dev); - - /* Make LEDS reflect Link status. - */ - *((uint *) RPX_CSR_ADDR) &= ~BCSR2_FETHLEDMODE; -#endif -#ifdef CONFIG_FADS - if (request_8xxirq(SIU_IRQ2, mii_link_interrupt, 0, "mii", dev) != 0) - panic("Could not allocate MII IRQ!"); -#endif -} - -static void __inline__ fec_get_mac(struct net_device *dev) -{ - bd_t *bd; - - bd = (bd_t *)__res; - memcpy(dev->dev_addr, bd->bi_enetaddr, ETH_ALEN); - -#ifdef CONFIG_RPXCLASSIC - /* The Embedded Planet boards have only one MAC address in - * the EEPROM, but can have two Ethernet ports. For the - * FEC port, we create another address by setting one of - * the address bits above something that would have (up to - * now) been allocated. - */ - dev->dev_adrd[3] |= 0x80; -#endif -} - -static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep) -{ - extern uint _get_IMMR(void); - volatile immap_t *immap; - volatile fec_t *fecp; - - fecp = fep->hwp; - immap = (immap_t *)IMAP_ADDR; /* pointer to internal registers */ - - /* Configure all of port D for MII. - */ - immap->im_ioport.iop_pdpar = 0x1fff; - - /* Bits moved from Rev. D onward. - */ - if ((_get_IMMR() & 0xffff) < 0x0501) - immap->im_ioport.iop_pddir = 0x1c58; /* Pre rev. D */ - else - immap->im_ioport.iop_pddir = 0x1fff; /* Rev. D and later */ - - /* Set MII speed to 2.5 MHz - */ - fecp->fec_mii_speed = fep->phy_speed = - ((bd->bi_busfreq * 1000000) / 2500000) & 0x7e; -} - -static void __inline__ fec_enable_phy_intr(void) -{ - volatile fec_t *fecp; - - fecp = fep->hwp; - - /* Enable MII command finished interrupt - */ - fecp->fec_ivec = (FEC_INTERRUPT/2) << 29; -} - -static void __inline__ fec_disable_phy_intr(void) -{ -} - -static void __inline__ fec_phy_ack_intr(void) -{ -} - -static void __inline__ fec_localhw_setup(void) -{ - volatile fec_t *fecp; - - fecp = fep->hwp; - fecp->fec_r_hash = PKT_MAXBUF_SIZE; - /* Enable big endian and don't care about SDMA FC. - */ - fecp->fec_fun_code = 0x78000000; -} - -static void __inline__ fec_uncache(unsigned long addr) -{ - pte_t *pte; - pte = va_to_pte(mem_addr); - pte_val(*pte) |= _PAGE_NO_CACHE; - flush_tlb_page(init_mm.mmap, mem_addr); -} - -#endif - -/* ------------------------------------------------------------------------- */ - -static void mii_display_status(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - volatile uint *s = &(fep->phy_status); - - if (!fep->link && !fep->old_link) { - /* Link is still down - don't print anything */ - return; - } - - printk("%s: status: ", dev->name); - - if (!fep->link) { - printk("link down"); - } else { - printk("link up"); - - switch(*s & PHY_STAT_SPMASK) { - case PHY_STAT_100FDX: printk(", 100MBit Full Duplex"); break; - case PHY_STAT_100HDX: printk(", 100MBit Half Duplex"); break; - case PHY_STAT_10FDX: printk(", 10MBit Full Duplex"); break; - case PHY_STAT_10HDX: printk(", 10MBit Half Duplex"); break; - default: - printk(", Unknown speed/duplex"); - } - - if (*s & PHY_STAT_ANC) - printk(", auto-negotiation complete"); - } - - if (*s & PHY_STAT_FAULT) - printk(", remote fault"); - - printk(".\n"); -} - -static void mii_display_config(struct work_struct *work) -{ - struct fec_enet_private *fep = container_of(work, struct fec_enet_private, phy_task); - struct net_device *dev = fep->netdev; - uint status = fep->phy_status; - - /* - ** When we get here, phy_task is already removed from - ** the workqueue. It is thus safe to allow to reuse it. - */ - fep->mii_phy_task_queued = 0; - printk("%s: config: auto-negotiation ", dev->name); - - if (status & PHY_CONF_ANE) - printk("on"); - else - printk("off"); - - if (status & PHY_CONF_100FDX) - printk(", 100FDX"); - if (status & PHY_CONF_100HDX) - printk(", 100HDX"); - if (status & PHY_CONF_10FDX) - printk(", 10FDX"); - if (status & PHY_CONF_10HDX) - printk(", 10HDX"); - if (!(status & PHY_CONF_SPMASK)) - printk(", No speed/duplex selected?"); - - if (status & PHY_CONF_LOOP) - printk(", loopback enabled"); - - printk(".\n"); - - fep->sequence_done = 1; -} - -static void mii_relink(struct work_struct *work) -{ - struct fec_enet_private *fep = container_of(work, struct fec_enet_private, phy_task); - struct net_device *dev = fep->netdev; - int duplex; - - /* - ** When we get here, phy_task is already removed from - ** the workqueue. It is thus safe to allow to reuse it. - */ - fep->mii_phy_task_queued = 0; - fep->link = (fep->phy_status & PHY_STAT_LINK) ? 1 : 0; - mii_display_status(dev); - fep->old_link = fep->link; - - if (fep->link) { - duplex = 0; - if (fep->phy_status - & (PHY_STAT_100FDX | PHY_STAT_10FDX)) - duplex = 1; - fec_restart(dev, duplex); - } else - fec_stop(dev); - -#if 0 - enable_irq(fep->mii_irq); -#endif - -} - -/* mii_queue_relink is called in interrupt context from mii_link_interrupt */ -static void mii_queue_relink(uint mii_reg, struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - - /* - ** We cannot queue phy_task twice in the workqueue. It - ** would cause an endless loop in the workqueue. - ** Fortunately, if the last mii_relink entry has not yet been - ** executed now, it will do the job for the current interrupt, - ** which is just what we want. - */ - if (fep->mii_phy_task_queued) - return; - - fep->mii_phy_task_queued = 1; - INIT_WORK(&fep->phy_task, mii_relink); - schedule_work(&fep->phy_task); -} - -/* mii_queue_config is called in interrupt context from fec_enet_mii */ -static void mii_queue_config(uint mii_reg, struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - - if (fep->mii_phy_task_queued) - return; - - fep->mii_phy_task_queued = 1; - INIT_WORK(&fep->phy_task, mii_display_config); - schedule_work(&fep->phy_task); -} - -phy_cmd_t const phy_cmd_relink[] = { - { mk_mii_read(MII_REG_CR), mii_queue_relink }, - { mk_mii_end, } - }; -phy_cmd_t const phy_cmd_config[] = { - { mk_mii_read(MII_REG_CR), mii_queue_config }, - { mk_mii_end, } - }; - -/* Read remainder of PHY ID. -*/ -static void -mii_discover_phy3(uint mii_reg, struct net_device *dev) -{ - struct fec_enet_private *fep; - int i; - - fep = netdev_priv(dev); - fep->phy_id |= (mii_reg & 0xffff); - printk("fec: PHY @ 0x%x, ID 0x%08x", fep->phy_addr, fep->phy_id); - - for(i = 0; phy_info[i]; i++) { - if(phy_info[i]->id == (fep->phy_id >> 4)) - break; - } - - if (phy_info[i]) - printk(" -- %s\n", phy_info[i]->name); - else - printk(" -- unknown PHY!\n"); - - fep->phy = phy_info[i]; - fep->phy_id_done = 1; -} - -/* Scan all of the MII PHY addresses looking for someone to respond - * with a valid ID. This usually happens quickly. - */ -static void -mii_discover_phy(uint mii_reg, struct net_device *dev) -{ - struct fec_enet_private *fep; - volatile fec_t *fecp; - uint phytype; - - fep = netdev_priv(dev); - fecp = fep->hwp; - - if (fep->phy_addr < 32) { - if ((phytype = (mii_reg & 0xffff)) != 0xffff && phytype != 0) { - - /* Got first part of ID, now get remainder. - */ - fep->phy_id = phytype << 16; - mii_queue(dev, mk_mii_read(MII_REG_PHYIR2), - mii_discover_phy3); - } else { - fep->phy_addr++; - mii_queue(dev, mk_mii_read(MII_REG_PHYIR1), - mii_discover_phy); - } - } else { - printk("FEC: No PHY device found.\n"); - /* Disable external MII interface */ - fecp->fec_mii_speed = fep->phy_speed = 0; - fec_disable_phy_intr(); - } -} - -/* This interrupt occurs when the PHY detects a link change. -*/ -#ifdef CONFIG_RPXCLASSIC -static void -mii_link_interrupt(void *dev_id) -#else -static irqreturn_t -mii_link_interrupt(int irq, void * dev_id) -#endif -{ - struct net_device *dev = dev_id; - struct fec_enet_private *fep = netdev_priv(dev); - - fec_phy_ack_intr(); - -#if 0 - disable_irq(fep->mii_irq); /* disable now, enable later */ -#endif - - mii_do_cmd(dev, fep->phy->ack_int); - mii_do_cmd(dev, phy_cmd_relink); /* restart and display status */ - - return IRQ_HANDLED; -} - -static int -fec_enet_open(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - - /* I should reset the ring buffers here, but I don't yet know - * a simple way to do that. - */ - fec_set_mac_address(dev); - - fep->sequence_done = 0; - fep->link = 0; - - if (fep->phy) { - mii_do_cmd(dev, fep->phy->ack_int); - mii_do_cmd(dev, fep->phy->config); - mii_do_cmd(dev, phy_cmd_config); /* display configuration */ - - /* Poll until the PHY tells us its configuration - * (not link state). - * Request is initiated by mii_do_cmd above, but answer - * comes by interrupt. - * This should take about 25 usec per register at 2.5 MHz, - * and we read approximately 5 registers. - */ - while(!fep->sequence_done) - schedule(); - - mii_do_cmd(dev, fep->phy->startup); - - /* Set the initial link state to true. A lot of hardware - * based on this device does not implement a PHY interrupt, - * so we are never notified of link change. - */ - fep->link = 1; - } else { - fep->link = 1; /* lets just try it and see */ - /* no phy, go full duplex, it's most likely a hub chip */ - fec_restart(dev, 1); - } - - netif_start_queue(dev); - fep->opened = 1; - return 0; /* Success */ -} - -static int -fec_enet_close(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - - /* Don't know what to do yet. - */ - fep->opened = 0; - netif_stop_queue(dev); - fec_stop(dev); - - return 0; -} - -/* Set or clear the multicast filter for this adaptor. - * Skeleton taken from sunlance driver. - * The CPM Ethernet implementation allows Multicast as well as individual - * MAC address filtering. Some of the drivers check to make sure it is - * a group multicast address, and discard those that are not. I guess I - * will do the same for now, but just remove the test if you want - * individual filtering as well (do the upper net layers want or support - * this kind of feature?). - */ - -#define HASH_BITS 6 /* #bits in hash */ -#define CRC32_POLY 0xEDB88320 - -static void set_multicast_list(struct net_device *dev) -{ - struct fec_enet_private *fep; - volatile fec_t *ep; - struct dev_mc_list *dmi; - unsigned int i, j, bit, data, crc; - unsigned char hash; - - fep = netdev_priv(dev); - ep = fep->hwp; - - if (dev->flags&IFF_PROMISC) { - ep->fec_r_cntrl |= 0x0008; - } else { - - ep->fec_r_cntrl &= ~0x0008; - - if (dev->flags & IFF_ALLMULTI) { - /* Catch all multicast addresses, so set the - * filter to all 1's. - */ - ep->fec_hash_table_high = 0xffffffff; - ep->fec_hash_table_low = 0xffffffff; - } else { - /* Clear filter and add the addresses in hash register. - */ - ep->fec_hash_table_high = 0; - ep->fec_hash_table_low = 0; - - dmi = dev->mc_list; - - for (j = 0; j < dev->mc_count; j++, dmi = dmi->next) - { - /* Only support group multicast for now. - */ - if (!(dmi->dmi_addr[0] & 1)) - continue; - - /* calculate crc32 value of mac address - */ - crc = 0xffffffff; - - for (i = 0; i < dmi->dmi_addrlen; i++) - { - data = dmi->dmi_addr[i]; - for (bit = 0; bit < 8; bit++, data >>= 1) - { - crc = (crc >> 1) ^ - (((crc ^ data) & 1) ? CRC32_POLY : 0); - } - } - - /* only upper 6 bits (HASH_BITS) are used - which point to specific bit in he hash registers - */ - hash = (crc >> (32 - HASH_BITS)) & 0x3f; - - if (hash > 31) - ep->fec_hash_table_high |= 1 << (hash - 32); - else - ep->fec_hash_table_low |= 1 << hash; - } - } - } -} - -/* Set a MAC change in hardware. - */ -static void -fec_set_mac_address(struct net_device *dev) -{ - volatile fec_t *fecp; - - fecp = ((struct fec_enet_private *)netdev_priv(dev))->hwp; - - /* Set station address. */ - fecp->fec_addr_low = dev->dev_addr[3] | (dev->dev_addr[2] << 8) | - (dev->dev_addr[1] << 16) | (dev->dev_addr[0] << 24); - fecp->fec_addr_high = (dev->dev_addr[5] << 16) | - (dev->dev_addr[4] << 24); - -} - -/* Initialize the FEC Ethernet on 860T (or ColdFire 5272). - */ - /* - * XXX: We need to clean up on failure exits here. - */ -int __init fec_enet_init(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - unsigned long mem_addr; - volatile cbd_t *bdp; - cbd_t *cbd_base; - volatile fec_t *fecp; - int i, j; - static int index = 0; - - /* Only allow us to be probed once. */ - if (index >= FEC_MAX_PORTS) - return -ENXIO; - - /* Allocate memory for buffer descriptors. - */ - mem_addr = __get_free_page(GFP_KERNEL); - if (mem_addr == 0) { - printk("FEC: allocate descriptor memory failed?\n"); - return -ENOMEM; - } - - /* Create an Ethernet device instance. - */ - fecp = (volatile fec_t *) fec_hw[index]; - - fep->index = index; - fep->hwp = fecp; - fep->netdev = dev; - - /* Whack a reset. We should wait for this. - */ - fecp->fec_ecntrl = 1; - udelay(10); - - /* Set the Ethernet address. If using multiple Enets on the 8xx, - * this needs some work to get unique addresses. - * - * This is our default MAC address unless the user changes - * it via eth_mac_addr (our dev->set_mac_addr handler). - */ - fec_get_mac(dev); - - cbd_base = (cbd_t *)mem_addr; - /* XXX: missing check for allocation failure */ - - fec_uncache(mem_addr); - - /* Set receive and transmit descriptor base. - */ - fep->rx_bd_base = cbd_base; - fep->tx_bd_base = cbd_base + RX_RING_SIZE; - - fep->dirty_tx = fep->cur_tx = fep->tx_bd_base; - fep->cur_rx = fep->rx_bd_base; - - fep->skb_cur = fep->skb_dirty = 0; - - /* Initialize the receive buffer descriptors. - */ - bdp = fep->rx_bd_base; - for (i=0; i<FEC_ENET_RX_PAGES; i++) { - - /* Allocate a page. - */ - mem_addr = __get_free_page(GFP_KERNEL); - /* XXX: missing check for allocation failure */ - - fec_uncache(mem_addr); - - /* Initialize the BD for every fragment in the page. - */ - for (j=0; j<FEC_ENET_RX_FRPPG; j++) { - bdp->cbd_sc = BD_ENET_RX_EMPTY; - bdp->cbd_bufaddr = __pa(mem_addr); - mem_addr += FEC_ENET_RX_FRSIZE; - bdp++; - } - } - - /* Set the last buffer to wrap. - */ - bdp--; - bdp->cbd_sc |= BD_SC_WRAP; - - /* ...and the same for transmmit. - */ - bdp = fep->tx_bd_base; - for (i=0, j=FEC_ENET_TX_FRPPG; i<TX_RING_SIZE; i++) { - if (j >= FEC_ENET_TX_FRPPG) { - mem_addr = __get_free_page(GFP_KERNEL); - j = 1; - } else { - mem_addr += FEC_ENET_TX_FRSIZE; - j++; - } - fep->tx_bounce[i] = (unsigned char *) mem_addr; - - /* Initialize the BD for every fragment in the page. - */ - bdp->cbd_sc = 0; - bdp->cbd_bufaddr = 0; - bdp++; - } - - /* Set the last buffer to wrap. - */ - bdp--; - bdp->cbd_sc |= BD_SC_WRAP; - - /* Set receive and transmit descriptor base. - */ - fecp->fec_r_des_start = __pa((uint)(fep->rx_bd_base)); - fecp->fec_x_des_start = __pa((uint)(fep->tx_bd_base)); - - /* Install our interrupt handlers. This varies depending on - * the architecture. - */ - fec_request_intrs(dev); - - fecp->fec_hash_table_high = 0; - fecp->fec_hash_table_low = 0; - fecp->fec_r_buff_size = PKT_MAXBLR_SIZE; - fecp->fec_ecntrl = 2; - fecp->fec_r_des_active = 0; - - dev->base_addr = (unsigned long)fecp; - - /* The FEC Ethernet specific entries in the device structure. */ - dev->open = fec_enet_open; - dev->hard_start_xmit = fec_enet_start_xmit; - dev->tx_timeout = fec_timeout; - dev->watchdog_timeo = TX_TIMEOUT; - dev->stop = fec_enet_close; - dev->set_multicast_list = set_multicast_list; - - for (i=0; i<NMII-1; i++) - mii_cmds[i].mii_next = &mii_cmds[i+1]; - mii_free = mii_cmds; - - /* setup MII interface */ - fec_set_mii(dev, fep); - - /* Clear and enable interrupts */ - fecp->fec_ievent = 0xffc00000; - fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_TXB | - FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII); - - /* Queue up command to detect the PHY and initialize the - * remainder of the interface. - */ - fep->phy_id_done = 0; - fep->phy_addr = 0; - mii_queue(dev, mk_mii_read(MII_REG_PHYIR1), mii_discover_phy); - - index++; - return 0; -} - -/* This function is called to start or restart the FEC during a link - * change. This only happens when switching between half and full - * duplex. - */ -static void -fec_restart(struct net_device *dev, int duplex) -{ - struct fec_enet_private *fep; - volatile cbd_t *bdp; - volatile fec_t *fecp; - int i; - - fep = netdev_priv(dev); - fecp = fep->hwp; - - /* Whack a reset. We should wait for this. - */ - fecp->fec_ecntrl = 1; - udelay(10); - - /* Clear any outstanding interrupt. - */ - fecp->fec_ievent = 0xffc00000; - fec_enable_phy_intr(); - - /* Set station address. - */ - fec_set_mac_address(dev); - - /* Reset all multicast. - */ - fecp->fec_hash_table_high = 0; - fecp->fec_hash_table_low = 0; - - /* Set maximum receive buffer size. - */ - fecp->fec_r_buff_size = PKT_MAXBLR_SIZE; - - fec_localhw_setup(); - - /* Set receive and transmit descriptor base. - */ - fecp->fec_r_des_start = __pa((uint)(fep->rx_bd_base)); - fecp->fec_x_des_start = __pa((uint)(fep->tx_bd_base)); - - fep->dirty_tx = fep->cur_tx = fep->tx_bd_base; - fep->cur_rx = fep->rx_bd_base; - - /* Reset SKB transmit buffers. - */ - fep->skb_cur = fep->skb_dirty = 0; - for (i=0; i<=TX_RING_MOD_MASK; i++) { - if (fep->tx_skbuff[i] != NULL) { - dev_kfree_skb_any(fep->tx_skbuff[i]); - fep->tx_skbuff[i] = NULL; - } - } - - /* Initialize the receive buffer descriptors. - */ - bdp = fep->rx_bd_base; - for (i=0; i<RX_RING_SIZE; i++) { - - /* Initialize the BD for every fragment in the page. - */ - bdp->cbd_sc = BD_ENET_RX_EMPTY; - bdp++; - } - - /* Set the last buffer to wrap. - */ - bdp--; - bdp->cbd_sc |= BD_SC_WRAP; - - /* ...and the same for transmmit. - */ - bdp = fep->tx_bd_base; - for (i=0; i<TX_RING_SIZE; i++) { - - /* Initialize the BD for every fragment in the page. - */ - bdp->cbd_sc = 0; - bdp->cbd_bufaddr = 0; - bdp++; - } - - /* Set the last buffer to wrap. - */ - bdp--; - bdp->cbd_sc |= BD_SC_WRAP; - - /* Enable MII mode. - */ - if (duplex) { - fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;/* MII enable */ - fecp->fec_x_cntrl = 0x04; /* FD enable */ - } else { - /* MII enable|No Rcv on Xmit */ - fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x06; - fecp->fec_x_cntrl = 0x00; - } - fep->full_duplex = duplex; - - /* Set MII speed. - */ - fecp->fec_mii_speed = fep->phy_speed; - - /* And last, enable the transmit and receive processing. - */ - fecp->fec_ecntrl = 2; - fecp->fec_r_des_active = 0; - - /* Enable interrupts we wish to service. - */ - fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_TXB | - FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII); -} - -static void -fec_stop(struct net_device *dev) -{ - volatile fec_t *fecp; - struct fec_enet_private *fep; - - fep = netdev_priv(dev); - fecp = fep->hwp; - - /* - ** We cannot expect a graceful transmit stop without link !!! - */ - if (fep->link) - { - fecp->fec_x_cntrl = 0x01; /* Graceful transmit stop */ - udelay(10); - if (!(fecp->fec_ievent & FEC_ENET_GRA)) - printk("fec_stop : Graceful transmit stop did not complete !\n"); - } - - /* Whack a reset. We should wait for this. - */ - fecp->fec_ecntrl = 1; - udelay(10); - - /* Clear outstanding MII command interrupts. - */ - fecp->fec_ievent = FEC_ENET_MII; - fec_enable_phy_intr(); - - fecp->fec_imask = FEC_ENET_MII; - fecp->fec_mii_speed = fep->phy_speed; -} - -static int __init fec_enet_module_init(void) -{ - struct net_device *dev; - int i, j, err; - DECLARE_MAC_BUF(mac); - - printk("FEC ENET Version 0.2\n"); - - for (i = 0; (i < FEC_MAX_PORTS); i++) { - dev = alloc_etherdev(sizeof(struct fec_enet_private)); - if (!dev) - return -ENOMEM; - err = fec_enet_init(dev); - if (err) { - free_netdev(dev); - continue; - } - if (register_netdev(dev) != 0) { - /* XXX: missing cleanup here */ - free_netdev(dev); - return -EIO; - } - - printk("%s: ethernet %s\n", - dev->name, print_mac(mac, dev->dev_addr)); - } - return 0; -} - -module_init(fec_enet_module_init); - -MODULE_LICENSE("GPL"); |