diff options
Diffstat (limited to 'drivers/net/ethernet/stmicro')
33 files changed, 4557 insertions, 1567 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig index 036428348fa..2d09c116cbc 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig @@ -1,10 +1,11 @@ config STMMAC_ETH tristate "STMicroelectronics 10/100/1000 Ethernet driver" - depends on HAS_IOMEM - select NET_CORE + depends on HAS_IOMEM && HAS_DMA select MII select PHYLIB select CRC32 + select PTP_1588_CLOCK + select RESET_CONTROLLER ---help--- This is the driver for the Ethernet IPs are built around a Synopsys IP Core and only tested on the STMicroelectronics @@ -13,7 +14,7 @@ config STMMAC_ETH if STMMAC_ETH config STMMAC_PLATFORM - tristate "STMMAC platform bus support" + bool "STMMAC Platform bus support" depends on STMMAC_ETH default y ---help--- @@ -25,9 +26,41 @@ config STMMAC_PLATFORM If unsure, say N. +config DWMAC_SOCFPGA + bool "SOCFPGA dwmac support" + depends on STMMAC_PLATFORM && MFD_SYSCON && (ARCH_SOCFPGA || COMPILE_TEST) + help + Support for ethernet controller on Altera SOCFPGA + + This selects the Altera SOCFPGA SoC glue layer support + for the stmmac device driver. This driver is used for + arria5 and cyclone5 FPGA SoCs. + +config DWMAC_SUNXI + bool "Allwinner GMAC support" + depends on STMMAC_PLATFORM && ARCH_SUNXI + default y + ---help--- + Support for Allwinner A20/A31 GMAC ethernet controllers. + + This selects Allwinner SoC glue layer support for the + stmmac device driver. This driver is used for A20/A31 + GMAC ethernet controller. + +config DWMAC_STI + bool "STi GMAC support" + depends on STMMAC_PLATFORM && ARCH_STI + default y + ---help--- + Support for ethernet controller on STi SOCs. + + This selects STi SoC glue layer support for the stmmac + device driver. This driver is used on for the STi series + SOCs GMAC ethernet controller. + config STMMAC_PCI - tristate "STMMAC support on PCI bus (EXPERIMENTAL)" - depends on STMMAC_ETH && PCI && EXPERIMENTAL + bool "STMMAC PCI bus support" + depends on STMMAC_ETH && PCI ---help--- This is to select the Synopsys DWMAC available on PCI devices, if you have a controller with this interface, say Y or M here. @@ -54,47 +87,4 @@ config STMMAC_DA By default, the DMA arbitration scheme is based on Round-robin (rx:tx priority is 1:1). -config STMMAC_TIMER - bool "STMMAC Timer optimisation" - default n - depends on RTC_HCTOSYS_DEVICE - ---help--- - Use an external timer for mitigating the number of network - interrupts. Currently, for SH architectures, it is possible - to use the TMU channel 2 and the SH-RTC device. - -choice - prompt "Select Timer device" - depends on STMMAC_TIMER - -config STMMAC_TMU_TIMER - bool "TMU channel 2" - depends on CPU_SH4 - ---help--- - -config STMMAC_RTC_TIMER - bool "Real time clock" - depends on RTC_CLASS - ---help--- - -endchoice - -choice - prompt "Select the DMA TX/RX descriptor operating modes" - depends on STMMAC_ETH - ---help--- - This driver supports DMA descriptor to operate both in dual buffer - (RING) and linked-list(CHAINED) mode. In RING mode each descriptor - points to two data buffer pointers whereas in CHAINED mode they - points to only one data buffer pointer. - -config STMMAC_RING - bool "Enable Descriptor Ring Mode" - -config STMMAC_CHAINED - bool "Enable Descriptor Chained Mode" - -endchoice - - endif diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile index bc965ac9e02..18695ebef7e 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Makefile +++ b/drivers/net/ethernet/stmicro/stmmac/Makefile @@ -1,10 +1,10 @@ obj-$(CONFIG_STMMAC_ETH) += stmmac.o -stmmac-$(CONFIG_STMMAC_TIMER) += stmmac_timer.o -stmmac-$(CONFIG_STMMAC_RING) += ring_mode.o -stmmac-$(CONFIG_STMMAC_CHAINED) += chain_mode.o stmmac-$(CONFIG_STMMAC_PLATFORM) += stmmac_platform.o stmmac-$(CONFIG_STMMAC_PCI) += stmmac_pci.o -stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o \ - dwmac_lib.o dwmac1000_core.o dwmac1000_dma.o \ +stmmac-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o +stmmac-$(CONFIG_DWMAC_STI) += dwmac-sti.o +stmmac-$(CONFIG_DWMAC_SOCFPGA) += dwmac-socfpga.o +stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o ring_mode.o \ + chain_mode.o dwmac_lib.o dwmac1000_core.o dwmac1000_dma.o \ dwmac100_core.o dwmac100_dma.o enh_desc.o norm_desc.o \ - mmc_core.o $(stmmac-y) + mmc_core.o stmmac_hwtstamp.o stmmac_ptp.o $(stmmac-y) diff --git a/drivers/net/ethernet/stmicro/stmmac/chain_mode.c b/drivers/net/ethernet/stmicro/stmmac/chain_mode.c index 0668659803e..c553f6b5a91 100644 --- a/drivers/net/ethernet/stmicro/stmmac/chain_mode.c +++ b/drivers/net/ethernet/stmicro/stmmac/chain_mode.c @@ -28,9 +28,9 @@ #include "stmmac.h" -unsigned int stmmac_jumbo_frm(void *p, struct sk_buff *skb, int csum) +static unsigned int stmmac_jumbo_frm(void *p, struct sk_buff *skb, int csum) { - struct stmmac_priv *priv = (struct stmmac_priv *) p; + struct stmmac_priv *priv = (struct stmmac_priv *)p; unsigned int txsize = priv->dma_tx_size; unsigned int entry = priv->cur_tx % txsize; struct dma_desc *desc = priv->dma_tx + entry; @@ -47,9 +47,11 @@ unsigned int stmmac_jumbo_frm(void *p, struct sk_buff *skb, int csum) desc->des2 = dma_map_single(priv->device, skb->data, bmax, DMA_TO_DEVICE); - priv->hw->desc->prepare_tx_desc(desc, 1, bmax, csum); + priv->tx_skbuff_dma[entry] = desc->des2; + priv->hw->desc->prepare_tx_desc(desc, 1, bmax, csum, STMMAC_CHAIN_MODE); while (len != 0) { + priv->tx_skbuff[entry] = NULL; entry = (++priv->cur_tx) % txsize; desc = priv->dma_tx + entry; @@ -57,20 +59,20 @@ unsigned int stmmac_jumbo_frm(void *p, struct sk_buff *skb, int csum) desc->des2 = dma_map_single(priv->device, (skb->data + bmax * i), bmax, DMA_TO_DEVICE); - priv->hw->desc->prepare_tx_desc(desc, 0, bmax, - csum); + priv->tx_skbuff_dma[entry] = desc->des2; + priv->hw->desc->prepare_tx_desc(desc, 0, bmax, csum, + STMMAC_CHAIN_MODE); priv->hw->desc->set_tx_owner(desc); - priv->tx_skbuff[entry] = NULL; len -= bmax; i++; } else { desc->des2 = dma_map_single(priv->device, (skb->data + bmax * i), len, DMA_TO_DEVICE); - priv->hw->desc->prepare_tx_desc(desc, 0, len, - csum); + priv->tx_skbuff_dma[entry] = desc->des2; + priv->hw->desc->prepare_tx_desc(desc, 0, len, csum, + STMMAC_CHAIN_MODE); priv->hw->desc->set_tx_owner(desc); - priv->tx_skbuff[entry] = NULL; len = 0; } } @@ -89,49 +91,70 @@ static unsigned int stmmac_is_jumbo_frm(int len, int enh_desc) return ret; } -static void stmmac_refill_desc3(int bfsize, struct dma_desc *p) -{ -} - -static void stmmac_init_desc3(int des3_as_data_buf, struct dma_desc *p) -{ -} - -static void stmmac_clean_desc3(struct dma_desc *p) -{ -} - -static void stmmac_init_dma_chain(struct dma_desc *des, dma_addr_t phy_addr, - unsigned int size) +static void stmmac_init_dma_chain(void *des, dma_addr_t phy_addr, + unsigned int size, unsigned int extend_desc) { /* * In chained mode the des3 points to the next element in the ring. * The latest element has to point to the head. */ int i; - struct dma_desc *p = des; dma_addr_t dma_phy = phy_addr; - for (i = 0; i < (size - 1); i++) { - dma_phy += sizeof(struct dma_desc); - p->des3 = (unsigned int)dma_phy; - p++; + if (extend_desc) { + struct dma_extended_desc *p = (struct dma_extended_desc *)des; + for (i = 0; i < (size - 1); i++) { + dma_phy += sizeof(struct dma_extended_desc); + p->basic.des3 = (unsigned int)dma_phy; + p++; + } + p->basic.des3 = (unsigned int)phy_addr; + + } else { + struct dma_desc *p = (struct dma_desc *)des; + for (i = 0; i < (size - 1); i++) { + dma_phy += sizeof(struct dma_desc); + p->des3 = (unsigned int)dma_phy; + p++; + } + p->des3 = (unsigned int)phy_addr; } - p->des3 = (unsigned int)phy_addr; } -static int stmmac_set_16kib_bfsize(int mtu) +static void stmmac_refill_desc3(void *priv_ptr, struct dma_desc *p) +{ + struct stmmac_priv *priv = (struct stmmac_priv *)priv_ptr; + + if (priv->hwts_rx_en && !priv->extend_desc) + /* NOTE: Device will overwrite des3 with timestamp value if + * 1588-2002 time stamping is enabled, hence reinitialize it + * to keep explicit chaining in the descriptor. + */ + p->des3 = (unsigned int)(priv->dma_rx_phy + + (((priv->dirty_rx) + 1) % + priv->dma_rx_size) * + sizeof(struct dma_desc)); +} + +static void stmmac_clean_desc3(void *priv_ptr, struct dma_desc *p) { - /* Not supported */ - return 0; + struct stmmac_priv *priv = (struct stmmac_priv *)priv_ptr; + + if (priv->hw->desc->get_tx_ls(p) && !priv->extend_desc) + /* NOTE: Device will overwrite des3 with timestamp value if + * 1588-2002 time stamping is enabled, hence reinitialize it + * to keep explicit chaining in the descriptor. + */ + p->des3 = (unsigned int)(priv->dma_tx_phy + + (((priv->dirty_tx + 1) % + priv->dma_tx_size) * + sizeof(struct dma_desc))); } -const struct stmmac_ring_mode_ops ring_mode_ops = { +const struct stmmac_mode_ops chain_mode_ops = { + .init = stmmac_init_dma_chain, .is_jumbo_frm = stmmac_is_jumbo_frm, .jumbo_frm = stmmac_jumbo_frm, .refill_desc3 = stmmac_refill_desc3, - .init_desc3 = stmmac_init_desc3, - .init_dma_chain = stmmac_init_dma_chain, .clean_desc3 = stmmac_clean_desc3, - .set_16kib_bfsize = stmmac_set_16kib_bfsize, }; diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h index 0319d640f72..74610f3aca9 100644 --- a/drivers/net/ethernet/stmicro/stmmac/common.h +++ b/drivers/net/ethernet/stmicro/stmmac/common.h @@ -22,11 +22,13 @@ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> *******************************************************************************/ +#ifndef __COMMON_H__ +#define __COMMON_H__ + #include <linux/etherdevice.h> #include <linux/netdevice.h> #include <linux/phy.h> #include <linux/module.h> -#include <linux/init.h> #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) #define STMMAC_VLAN_TAG_USED #include <linux/if_vlan.h> @@ -35,15 +37,9 @@ #include "descs.h" #include "mmc.h" -#undef CHIP_DEBUG_PRINT -/* Turn-on extra printk debug for MAC core, dma and descriptors */ -/* #define CHIP_DEBUG_PRINT */ - -#ifdef CHIP_DEBUG_PRINT -#define CHIP_DBG(fmt, args...) printk(fmt, ## args) -#else -#define CHIP_DBG(fmt, args...) do { } while (0) -#endif +/* Synopsys Core versions */ +#define DWMAC_CORE_3_40 0x34 +#define DWMAC_CORE_3_50 0x35 #undef FRAME_FILTER_DEBUG /* #define FRAME_FILTER_DEBUG */ @@ -78,7 +74,7 @@ struct stmmac_extra_stats { unsigned long rx_missed_cntr; unsigned long rx_overflow_cntr; unsigned long rx_vlan; - /* Tx/Rx IRQ errors */ + /* Tx/Rx IRQ error info */ unsigned long tx_undeflow_irq; unsigned long tx_process_stopped_irq; unsigned long tx_jabber_irq; @@ -88,15 +84,70 @@ struct stmmac_extra_stats { unsigned long rx_watchdog_irq; unsigned long tx_early_irq; unsigned long fatal_bus_error_irq; - /* Extra info */ + /* Tx/Rx IRQ Events */ + unsigned long rx_early_irq; unsigned long threshold; unsigned long tx_pkt_n; unsigned long rx_pkt_n; - unsigned long poll_n; - unsigned long sched_timer_n; unsigned long normal_irq_n; + unsigned long rx_normal_irq_n; + unsigned long napi_poll; + unsigned long tx_normal_irq_n; + unsigned long tx_clean; + unsigned long tx_reset_ic_bit; + unsigned long irq_receive_pmt_irq_n; + /* MMC info */ + unsigned long mmc_tx_irq_n; + unsigned long mmc_rx_irq_n; + unsigned long mmc_rx_csum_offload_irq_n; + /* EEE */ + unsigned long irq_tx_path_in_lpi_mode_n; + unsigned long irq_tx_path_exit_lpi_mode_n; + unsigned long irq_rx_path_in_lpi_mode_n; + unsigned long irq_rx_path_exit_lpi_mode_n; + unsigned long phy_eee_wakeup_error_n; + /* Extended RDES status */ + unsigned long ip_hdr_err; + unsigned long ip_payload_err; + unsigned long ip_csum_bypassed; + unsigned long ipv4_pkt_rcvd; + unsigned long ipv6_pkt_rcvd; + unsigned long rx_msg_type_ext_no_ptp; + unsigned long rx_msg_type_sync; + unsigned long rx_msg_type_follow_up; + unsigned long rx_msg_type_delay_req; + unsigned long rx_msg_type_delay_resp; + unsigned long rx_msg_type_pdelay_req; + unsigned long rx_msg_type_pdelay_resp; + unsigned long rx_msg_type_pdelay_follow_up; + unsigned long ptp_frame_type; + unsigned long ptp_ver; + unsigned long timestamp_dropped; + unsigned long av_pkt_rcvd; + unsigned long av_tagged_pkt_rcvd; + unsigned long vlan_tag_priority_val; + unsigned long l3_filter_match; + unsigned long l4_filter_match; + unsigned long l3_l4_filter_no_match; + /* PCS */ + unsigned long irq_pcs_ane_n; + unsigned long irq_pcs_link_n; + unsigned long irq_rgmii_n; + unsigned long pcs_link; + unsigned long pcs_duplex; + unsigned long pcs_speed; }; +/* CSR Frequency Access Defines*/ +#define CSR_F_35M 35000000 +#define CSR_F_60M 60000000 +#define CSR_F_100M 100000000 +#define CSR_F_150M 150000000 +#define CSR_F_250M 250000000 +#define CSR_F_300M 300000000 + +#define MAC_CSR_H_FRQ_MASK 0x20 + #define HASH_TABLE_SIZE 64 #define PAUSE_TIME 0x200 @@ -106,51 +157,88 @@ struct stmmac_extra_stats { #define FLOW_TX 2 #define FLOW_AUTO (FLOW_TX | FLOW_RX) -#define SF_DMA_MODE 1 /* DMA STORE-AND-FORWARD Operation Mode */ +/* PCS defines */ +#define STMMAC_PCS_RGMII (1 << 0) +#define STMMAC_PCS_SGMII (1 << 1) +#define STMMAC_PCS_TBI (1 << 2) +#define STMMAC_PCS_RTBI (1 << 3) + +#define SF_DMA_MODE 1 /* DMA STORE-AND-FORWARD Operation Mode */ /* DAM HW feature register fields */ -#define DMA_HW_FEAT_MIISEL 0x00000001 /* 10/100 Mbps Support */ -#define DMA_HW_FEAT_GMIISEL 0x00000002 /* 1000 Mbps Support */ -#define DMA_HW_FEAT_HDSEL 0x00000004 /* Half-Duplex Support */ -#define DMA_HW_FEAT_EXTHASHEN 0x00000008 /* Expanded DA Hash Filter */ -#define DMA_HW_FEAT_HASHSEL 0x00000010 /* HASH Filter */ -#define DMA_HW_FEAT_ADDMACADRSEL 0x00000020 /* Multiple MAC Addr Reg */ -#define DMA_HW_FEAT_PCSSEL 0x00000040 /* PCS registers */ -#define DMA_HW_FEAT_L3L4FLTREN 0x00000080 /* Layer 3 & Layer 4 Feature */ -#define DMA_HW_FEAT_SMASEL 0x00000100 /* SMA(MDIO) Interface */ -#define DMA_HW_FEAT_RWKSEL 0x00000200 /* PMT Remote Wakeup */ -#define DMA_HW_FEAT_MGKSEL 0x00000400 /* PMT Magic Packet */ -#define DMA_HW_FEAT_MMCSEL 0x00000800 /* RMON Module */ -#define DMA_HW_FEAT_TSVER1SEL 0x00001000 /* Only IEEE 1588-2002 Timestamp */ -#define DMA_HW_FEAT_TSVER2SEL 0x00002000 /* IEEE 1588-2008 Adv Timestamp */ -#define DMA_HW_FEAT_EEESEL 0x00004000 /* Energy Efficient Ethernet */ -#define DMA_HW_FEAT_AVSEL 0x00008000 /* AV Feature */ -#define DMA_HW_FEAT_TXCOESEL 0x00010000 /* Checksum Offload in Tx */ -#define DMA_HW_FEAT_RXTYP1COE 0x00020000 /* IP csum Offload(Type 1) in Rx */ -#define DMA_HW_FEAT_RXTYP2COE 0x00040000 /* IP csum Offload(Type 2) in Rx */ -#define DMA_HW_FEAT_RXFIFOSIZE 0x00080000 /* Rx FIFO > 2048 Bytes */ -#define DMA_HW_FEAT_RXCHCNT 0x00300000 /* No. of additional Rx Channels */ -#define DMA_HW_FEAT_TXCHCNT 0x00c00000 /* No. of additional Tx Channels */ -#define DMA_HW_FEAT_ENHDESSEL 0x01000000 /* Alternate (Enhanced Descriptor) */ -#define DMA_HW_FEAT_INTTSEN 0x02000000 /* Timestamping with Internal - System Time */ -#define DMA_HW_FEAT_FLEXIPPSEN 0x04000000 /* Flexible PPS Output */ -#define DMA_HW_FEAT_SAVLANINS 0x08000000 /* Source Addr or VLAN Insertion */ -#define DMA_HW_FEAT_ACTPHYIF 0x70000000 /* Active/selected PHY interface */ - -enum rx_frame_status { /* IPC status */ +#define DMA_HW_FEAT_MIISEL 0x00000001 /* 10/100 Mbps Support */ +#define DMA_HW_FEAT_GMIISEL 0x00000002 /* 1000 Mbps Support */ +#define DMA_HW_FEAT_HDSEL 0x00000004 /* Half-Duplex Support */ +#define DMA_HW_FEAT_EXTHASHEN 0x00000008 /* Expanded DA Hash Filter */ +#define DMA_HW_FEAT_HASHSEL 0x00000010 /* HASH Filter */ +#define DMA_HW_FEAT_ADDMAC 0x00000020 /* Multiple MAC Addr Reg */ +#define DMA_HW_FEAT_PCSSEL 0x00000040 /* PCS registers */ +#define DMA_HW_FEAT_L3L4FLTREN 0x00000080 /* Layer 3 & Layer 4 Feature */ +#define DMA_HW_FEAT_SMASEL 0x00000100 /* SMA(MDIO) Interface */ +#define DMA_HW_FEAT_RWKSEL 0x00000200 /* PMT Remote Wakeup */ +#define DMA_HW_FEAT_MGKSEL 0x00000400 /* PMT Magic Packet */ +#define DMA_HW_FEAT_MMCSEL 0x00000800 /* RMON Module */ +#define DMA_HW_FEAT_TSVER1SEL 0x00001000 /* Only IEEE 1588-2002 */ +#define DMA_HW_FEAT_TSVER2SEL 0x00002000 /* IEEE 1588-2008 PTPv2 */ +#define DMA_HW_FEAT_EEESEL 0x00004000 /* Energy Efficient Ethernet */ +#define DMA_HW_FEAT_AVSEL 0x00008000 /* AV Feature */ +#define DMA_HW_FEAT_TXCOESEL 0x00010000 /* Checksum Offload in Tx */ +#define DMA_HW_FEAT_RXTYP1COE 0x00020000 /* IP COE (Type 1) in Rx */ +#define DMA_HW_FEAT_RXTYP2COE 0x00040000 /* IP COE (Type 2) in Rx */ +#define DMA_HW_FEAT_RXFIFOSIZE 0x00080000 /* Rx FIFO > 2048 Bytes */ +#define DMA_HW_FEAT_RXCHCNT 0x00300000 /* No. additional Rx Channels */ +#define DMA_HW_FEAT_TXCHCNT 0x00c00000 /* No. additional Tx Channels */ +#define DMA_HW_FEAT_ENHDESSEL 0x01000000 /* Alternate Descriptor */ +/* Timestamping with Internal System Time */ +#define DMA_HW_FEAT_INTTSEN 0x02000000 +#define DMA_HW_FEAT_FLEXIPPSEN 0x04000000 /* Flexible PPS Output */ +#define DMA_HW_FEAT_SAVLANINS 0x08000000 /* Source Addr or VLAN */ +#define DMA_HW_FEAT_ACTPHYIF 0x70000000 /* Active/selected PHY iface */ +#define DEFAULT_DMA_PBL 8 + +/* Max/Min RI Watchdog Timer count value */ +#define MAX_DMA_RIWT 0xff +#define MIN_DMA_RIWT 0x20 +/* Tx coalesce parameters */ +#define STMMAC_COAL_TX_TIMER 40000 +#define STMMAC_MAX_COAL_TX_TICK 100000 +#define STMMAC_TX_MAX_FRAMES 256 +#define STMMAC_TX_FRAMES 64 + +/* Rx IPC status */ +enum rx_frame_status { good_frame = 0, discard_frame = 1, csum_none = 2, llc_snap = 4, }; -enum tx_dma_irq_status { - tx_hard_error = 1, - tx_hard_error_bump_tc = 2, - handle_tx_rx = 3, +enum dma_irq_status { + tx_hard_error = 0x1, + tx_hard_error_bump_tc = 0x2, + handle_rx = 0x4, + handle_tx = 0x8, }; +#define CORE_IRQ_TX_PATH_IN_LPI_MODE (1 << 1) +#define CORE_IRQ_TX_PATH_EXIT_LPI_MODE (1 << 2) +#define CORE_IRQ_RX_PATH_IN_LPI_MODE (1 << 3) +#define CORE_IRQ_RX_PATH_EXIT_LPI_MODE (1 << 4) + +#define CORE_PCS_ANE_COMPLETE (1 << 5) +#define CORE_PCS_LINK_STATUS (1 << 6) +#define CORE_RGMII_IRQ (1 << 7) + +struct rgmii_adv { + unsigned int pause; + unsigned int duplex; + unsigned int lp_pause; + unsigned int lp_duplex; +}; + +#define STMMAC_PCS_PAUSE 1 +#define STMMAC_PCS_ASYM_PAUSE 2 + /* DMA HW capabilities */ struct dma_features { unsigned int mbps_10_100; @@ -163,9 +251,9 @@ struct dma_features { unsigned int pmt_remote_wake_up; unsigned int pmt_magic_frame; unsigned int rmon; - /* IEEE 1588-2002*/ + /* IEEE 1588-2002 */ unsigned int time_stamp; - /* IEEE 1588-2008*/ + /* IEEE 1588-2008 */ unsigned int atime_stamp; /* 802.3az - Energy-Efficient Ethernet (EEE) */ unsigned int eee; @@ -178,7 +266,7 @@ struct dma_features { /* TX and RX number of channels */ unsigned int number_rx_channel; unsigned int number_tx_channel; - /* Alternate (enhanced) DESC mode*/ + /* Alternate (enhanced) DESC mode */ unsigned int enh_desc; }; @@ -197,23 +285,32 @@ struct dma_features { #define MAC_ENABLE_TX 0x00000008 /* Transmitter Enable */ #define MAC_RNABLE_RX 0x00000004 /* Receiver Enable */ +/* Default LPI timers */ +#define STMMAC_DEFAULT_LIT_LS 0x3E8 +#define STMMAC_DEFAULT_TWT_LS 0x0 + +#define STMMAC_CHAIN_MODE 0x1 +#define STMMAC_RING_MODE 0x2 + +#define JUMBO_LEN 9000 + struct stmmac_desc_ops { /* DMA RX descriptor ring initialization */ - void (*init_rx_desc) (struct dma_desc *p, unsigned int ring_size, - int disable_rx_ic); + void (*init_rx_desc) (struct dma_desc *p, int disable_rx_ic, int mode, + int end); /* DMA TX descriptor ring initialization */ - void (*init_tx_desc) (struct dma_desc *p, unsigned int ring_size); + void (*init_tx_desc) (struct dma_desc *p, int mode, int end); /* Invoked by the xmit function to prepare the tx descriptor */ void (*prepare_tx_desc) (struct dma_desc *p, int is_fs, int len, - int csum_flag); + int csum_flag, int mode); /* Set/get the owner of the descriptor */ void (*set_tx_owner) (struct dma_desc *p); int (*get_tx_owner) (struct dma_desc *p); /* Invoked by the xmit function to close the tx descriptor */ void (*close_tx_desc) (struct dma_desc *p); /* Clean the tx descriptor as soon as the tx irq is received */ - void (*release_tx_desc) (struct dma_desc *p); + void (*release_tx_desc) (struct dma_desc *p, int mode); /* Clear interrupt on tx frame completion. When this bit is * set an interrupt happens as soon as the frame is transmitted */ void (*clear_tx_ic) (struct dma_desc *p); @@ -228,15 +325,26 @@ struct stmmac_desc_ops { int (*get_rx_owner) (struct dma_desc *p); void (*set_rx_owner) (struct dma_desc *p); /* Get the receive frame size */ - int (*get_rx_frame_len) (struct dma_desc *p); + int (*get_rx_frame_len) (struct dma_desc *p, int rx_coe_type); /* Return the reception status looking at the RDES1 */ int (*rx_status) (void *data, struct stmmac_extra_stats *x, struct dma_desc *p); + void (*rx_extended_status) (void *data, struct stmmac_extra_stats *x, + struct dma_extended_desc *p); + /* Set tx timestamp enable bit */ + void (*enable_tx_timestamp) (struct dma_desc *p); + /* get tx timestamp status */ + int (*get_tx_timestamp_status) (struct dma_desc *p); + /* get timestamp value */ + u64(*get_timestamp) (void *desc, u32 ats); + /* get rx timestamp status */ + int (*get_rx_timestamp_status) (void *desc, u32 ats); }; struct stmmac_dma_ops { /* DMA core initialization */ - int (*init) (void __iomem *ioaddr, int pbl, u32 dma_tx, u32 dma_rx); + int (*init) (void __iomem *ioaddr, int pbl, int fb, int mb, + int burst_len, u32 dma_tx, u32 dma_rx, int atds); /* Dump DMA registers */ void (*dump_regs) (void __iomem *ioaddr); /* Set tx/rx threshold in the csr6 register @@ -256,19 +364,22 @@ struct stmmac_dma_ops { struct stmmac_extra_stats *x); /* If supported then get the optional core features */ unsigned int (*get_hw_feature) (void __iomem *ioaddr); + /* Program the HW RX Watchdog */ + void (*rx_watchdog) (void __iomem *ioaddr, u32 riwt); }; struct stmmac_ops { /* MAC core initialization */ - void (*core_init) (void __iomem *ioaddr) ____cacheline_aligned; - /* Support checksum offload engine */ - int (*rx_coe) (void __iomem *ioaddr); + void (*core_init) (void __iomem *ioaddr, int mtu); + /* Enable and verify that the IPC module is supported */ + int (*rx_ipc) (void __iomem *ioaddr); /* Dump MAC registers */ void (*dump_regs) (void __iomem *ioaddr); /* Handle extra events on specific interrupts hw dependent */ - void (*host_irq_status) (void __iomem *ioaddr); + int (*host_irq_status) (void __iomem *ioaddr, + struct stmmac_extra_stats *x); /* Multicast filter setting */ - void (*set_filter) (struct net_device *dev); + void (*set_filter) (struct net_device *dev, int id); /* Flow control setting */ void (*flow_ctrl) (void __iomem *ioaddr, unsigned int duplex, unsigned int fc, unsigned int pause_time); @@ -279,6 +390,22 @@ struct stmmac_ops { unsigned int reg_n); void (*get_umac_addr) (void __iomem *ioaddr, unsigned char *addr, unsigned int reg_n); + void (*set_eee_mode) (void __iomem *ioaddr); + void (*reset_eee_mode) (void __iomem *ioaddr); + void (*set_eee_timer) (void __iomem *ioaddr, int ls, int tw); + void (*set_eee_pls) (void __iomem *ioaddr, int link); + void (*ctrl_ane) (void __iomem *ioaddr, bool restart); + void (*get_adv) (void __iomem *ioaddr, struct rgmii_adv *adv); +}; + +struct stmmac_hwtimestamp { + void (*config_hw_tstamping) (void __iomem *ioaddr, u32 data); + void (*config_sub_second_increment) (void __iomem *ioaddr); + int (*init_systime) (void __iomem *ioaddr, u32 sec, u32 nsec); + int (*config_addend) (void __iomem *ioaddr, u32 addend); + int (*adjust_systime) (void __iomem *ioaddr, u32 sec, u32 nsec, + int add_sub); + u64(*get_systime) (void __iomem *ioaddr); }; struct mac_link { @@ -292,22 +419,23 @@ struct mii_regs { unsigned int data; /* MII Data */ }; -struct stmmac_ring_mode_ops { +struct stmmac_mode_ops { + void (*init) (void *des, dma_addr_t phy_addr, unsigned int size, + unsigned int extend_desc); unsigned int (*is_jumbo_frm) (int len, int ehn_desc); unsigned int (*jumbo_frm) (void *priv, struct sk_buff *skb, int csum); - void (*refill_desc3) (int bfsize, struct dma_desc *p); - void (*init_desc3) (int des3_as_data_buf, struct dma_desc *p); - void (*init_dma_chain) (struct dma_desc *des, dma_addr_t phy_addr, - unsigned int size); - void (*clean_desc3) (struct dma_desc *p); - int (*set_16kib_bfsize) (int mtu); + int (*set_16kib_bfsize)(int mtu); + void (*init_desc3)(struct dma_desc *p); + void (*refill_desc3) (void *priv, struct dma_desc *p); + void (*clean_desc3) (void *priv, struct dma_desc *p); }; struct mac_device_info { - const struct stmmac_ops *mac; - const struct stmmac_desc_ops *desc; - const struct stmmac_dma_ops *dma; - const struct stmmac_ring_mode_ops *ring; + const struct stmmac_ops *mac; + const struct stmmac_desc_ops *desc; + const struct stmmac_dma_ops *dma; + const struct stmmac_mode_ops *mode; + const struct stmmac_hwtimestamp *ptp; struct mii_regs mii; /* MII register Addresses */ struct mac_link link; unsigned int synopsys_uid; @@ -316,12 +444,15 @@ struct mac_device_info { struct mac_device_info *dwmac1000_setup(void __iomem *ioaddr); struct mac_device_info *dwmac100_setup(void __iomem *ioaddr); -extern void stmmac_set_mac_addr(void __iomem *ioaddr, u8 addr[6], - unsigned int high, unsigned int low); -extern void stmmac_get_mac_addr(void __iomem *ioaddr, unsigned char *addr, - unsigned int high, unsigned int low); +void stmmac_set_mac_addr(void __iomem *ioaddr, u8 addr[6], + unsigned int high, unsigned int low); +void stmmac_get_mac_addr(void __iomem *ioaddr, unsigned char *addr, + unsigned int high, unsigned int low); + +void stmmac_set_mac(void __iomem *ioaddr, bool enable); -extern void stmmac_set_mac(void __iomem *ioaddr, bool enable); +void dwmac_dma_flush_tx_fifo(void __iomem *ioaddr); +extern const struct stmmac_mode_ops ring_mode_ops; +extern const struct stmmac_mode_ops chain_mode_ops; -extern void dwmac_dma_flush_tx_fifo(void __iomem *ioaddr); -extern const struct stmmac_ring_mode_ops ring_mode_ops; +#endif /* __COMMON_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/descs.h b/drivers/net/ethernet/stmicro/stmmac/descs.h index 9820ec842cc..ad399603801 100644 --- a/drivers/net/ethernet/stmicro/stmmac/descs.h +++ b/drivers/net/ethernet/stmicro/stmmac/descs.h @@ -20,6 +20,11 @@ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> *******************************************************************************/ + +#ifndef __DESCS_H__ +#define __DESCS_H__ + +/* Basic descriptor structure for normal and alternate descriptors */ struct dma_desc { /* Receive descriptor */ union { @@ -56,7 +61,7 @@ struct dma_desc { } rx; struct { /* RDES0 */ - u32 payload_csum_error:1; + u32 rx_mac_addr:1; u32 crc_error:1; u32 dribbling:1; u32 error_gmii:1; @@ -158,11 +163,57 @@ struct dma_desc { unsigned int des3; }; +/* Extended descriptor structure (supported by new SYNP GMAC generations) */ +struct dma_extended_desc { + struct dma_desc basic; + union { + struct { + u32 ip_payload_type:3; + u32 ip_hdr_err:1; + u32 ip_payload_err:1; + u32 ip_csum_bypassed:1; + u32 ipv4_pkt_rcvd:1; + u32 ipv6_pkt_rcvd:1; + u32 msg_type:4; + u32 ptp_frame_type:1; + u32 ptp_ver:1; + u32 timestamp_dropped:1; + u32 reserved:1; + u32 av_pkt_rcvd:1; + u32 av_tagged_pkt_rcvd:1; + u32 vlan_tag_priority_val:3; + u32 reserved3:3; + u32 l3_filter_match:1; + u32 l4_filter_match:1; + u32 l3_l4_filter_no_match:2; + u32 reserved4:4; + } erx; + struct { + u32 reserved; + } etx; + } des4; + unsigned int des5; /* Reserved */ + unsigned int des6; /* Tx/Rx Timestamp Low */ + unsigned int des7; /* Tx/Rx Timestamp High */ +}; + /* Transmit checksum insertion control */ enum tdes_csum_insertion { cic_disabled = 0, /* Checksum Insertion Control */ cic_only_ip = 1, /* Only IP header */ - cic_no_pseudoheader = 2, /* IP header but pseudoheader - * is not calculated */ + /* IP header but pseudoheader is not calculated */ + cic_no_pseudoheader = 2, cic_full = 3, /* IP header and pseudoheader */ }; + +/* Extended RDES4 definitions */ +#define RDES_EXT_NO_PTP 0 +#define RDES_EXT_SYNC 0x1 +#define RDES_EXT_FOLLOW_UP 0x2 +#define RDES_EXT_DELAY_REQ 0x3 +#define RDES_EXT_DELAY_RESP 0x4 +#define RDES_EXT_PDELAY_REQ 0x5 +#define RDES_EXT_PDELAY_RESP 0x6 +#define RDES_EXT_PDELAY_FOLLOW_UP 0x7 + +#endif /* __DESCS_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/descs_com.h b/drivers/net/ethernet/stmicro/stmmac/descs_com.h index dd8d6e19dff..6f2cc78c5cf 100644 --- a/drivers/net/ethernet/stmicro/stmmac/descs_com.h +++ b/drivers/net/ethernet/stmicro/stmmac/descs_com.h @@ -27,26 +27,31 @@ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> *******************************************************************************/ -#if defined(CONFIG_STMMAC_RING) -static inline void ehn_desc_rx_set_on_ring_chain(struct dma_desc *p, int end) +#ifndef __DESC_COM_H__ +#define __DESC_COM_H__ + +/* Specific functions used for Ring mode */ + +/* Enhanced descriptors */ +static inline void ehn_desc_rx_set_on_ring(struct dma_desc *p, int end) { p->des01.erx.buffer2_size = BUF_SIZE_8KiB - 1; if (end) p->des01.erx.end_ring = 1; } -static inline void ehn_desc_tx_set_on_ring_chain(struct dma_desc *p, int end) +static inline void ehn_desc_tx_set_on_ring(struct dma_desc *p, int end) { if (end) p->des01.etx.end_ring = 1; } -static inline void enh_desc_end_tx_desc(struct dma_desc *p, int ter) +static inline void enh_desc_end_tx_desc_on_ring(struct dma_desc *p, int ter) { p->des01.etx.end_ring = ter; } -static inline void enh_set_tx_desc_len(struct dma_desc *p, int len) +static inline void enh_set_tx_desc_len_on_ring(struct dma_desc *p, int len) { if (unlikely(len > BUF_SIZE_4KiB)) { p->des01.etx.buffer1_size = BUF_SIZE_4KiB; @@ -55,25 +60,26 @@ static inline void enh_set_tx_desc_len(struct dma_desc *p, int len) p->des01.etx.buffer1_size = len; } -static inline void ndesc_rx_set_on_ring_chain(struct dma_desc *p, int end) +/* Normal descriptors */ +static inline void ndesc_rx_set_on_ring(struct dma_desc *p, int end) { p->des01.rx.buffer2_size = BUF_SIZE_2KiB - 1; if (end) p->des01.rx.end_ring = 1; } -static inline void ndesc_tx_set_on_ring_chain(struct dma_desc *p, int end) +static inline void ndesc_tx_set_on_ring(struct dma_desc *p, int end) { if (end) p->des01.tx.end_ring = 1; } -static inline void ndesc_end_tx_desc(struct dma_desc *p, int ter) +static inline void ndesc_end_tx_desc_on_ring(struct dma_desc *p, int ter) { p->des01.tx.end_ring = ter; } -static inline void norm_set_tx_desc_len(struct dma_desc *p, int len) +static inline void norm_set_tx_desc_len_on_ring(struct dma_desc *p, int len) { if (unlikely(len > BUF_SIZE_2KiB)) { p->des01.etx.buffer1_size = BUF_SIZE_2KiB - 1; @@ -82,45 +88,47 @@ static inline void norm_set_tx_desc_len(struct dma_desc *p, int len) p->des01.tx.buffer1_size = len; } -#else +/* Specific functions used for Chain mode */ -static inline void ehn_desc_rx_set_on_ring_chain(struct dma_desc *p, int end) +/* Enhanced descriptors */ +static inline void ehn_desc_rx_set_on_chain(struct dma_desc *p, int end) { p->des01.erx.second_address_chained = 1; } -static inline void ehn_desc_tx_set_on_ring_chain(struct dma_desc *p, int end) +static inline void ehn_desc_tx_set_on_chain(struct dma_desc *p, int end) { p->des01.etx.second_address_chained = 1; } -static inline void enh_desc_end_tx_desc(struct dma_desc *p, int ter) +static inline void enh_desc_end_tx_desc_on_chain(struct dma_desc *p, int ter) { p->des01.etx.second_address_chained = 1; } -static inline void enh_set_tx_desc_len(struct dma_desc *p, int len) +static inline void enh_set_tx_desc_len_on_chain(struct dma_desc *p, int len) { p->des01.etx.buffer1_size = len; } -static inline void ndesc_rx_set_on_ring_chain(struct dma_desc *p, int end) +/* Normal descriptors */ +static inline void ndesc_rx_set_on_chain(struct dma_desc *p, int end) { p->des01.rx.second_address_chained = 1; } -static inline void ndesc_tx_set_on_ring_chain(struct dma_desc *p, int ring_size) +static inline void ndesc_tx_set_on_chain(struct dma_desc *p, int ring_size) { p->des01.tx.second_address_chained = 1; } -static inline void ndesc_end_tx_desc(struct dma_desc *p, int ter) +static inline void ndesc_end_tx_desc_on_chain(struct dma_desc *p, int ter) { p->des01.tx.second_address_chained = 1; } -static inline void norm_set_tx_desc_len(struct dma_desc *p, int len) +static inline void norm_set_tx_desc_len_on_chain(struct dma_desc *p, int len) { p->des01.tx.buffer1_size = len; } -#endif +#endif /* __DESC_COM_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c new file mode 100644 index 00000000000..fd8a217556a --- /dev/null +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c @@ -0,0 +1,130 @@ +/* Copyright Altera Corporation (C) 2014. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + * Adopted from dwmac-sti.c + */ + +#include <linux/mfd/syscon.h> +#include <linux/of.h> +#include <linux/of_net.h> +#include <linux/phy.h> +#include <linux/regmap.h> +#include <linux/stmmac.h> + +#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII 0x0 +#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII 0x1 +#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII 0x2 +#define SYSMGR_EMACGRP_CTRL_PHYSEL_WIDTH 2 +#define SYSMGR_EMACGRP_CTRL_PHYSEL_MASK 0x00000003 + +struct socfpga_dwmac { + int interface; + u32 reg_offset; + u32 reg_shift; + struct device *dev; + struct regmap *sys_mgr_base_addr; +}; + +static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device *dev) +{ + struct device_node *np = dev->of_node; + struct regmap *sys_mgr_base_addr; + u32 reg_offset, reg_shift; + int ret; + + dwmac->interface = of_get_phy_mode(np); + + sys_mgr_base_addr = syscon_regmap_lookup_by_phandle(np, "altr,sysmgr-syscon"); + if (IS_ERR(sys_mgr_base_addr)) { + dev_info(dev, "No sysmgr-syscon node found\n"); + return PTR_ERR(sys_mgr_base_addr); + } + + ret = of_property_read_u32_index(np, "altr,sysmgr-syscon", 1, ®_offset); + if (ret) { + dev_info(dev, "Could not read reg_offset from sysmgr-syscon!\n"); + return -EINVAL; + } + + ret = of_property_read_u32_index(np, "altr,sysmgr-syscon", 2, ®_shift); + if (ret) { + dev_info(dev, "Could not read reg_shift from sysmgr-syscon!\n"); + return -EINVAL; + } + + dwmac->reg_offset = reg_offset; + dwmac->reg_shift = reg_shift; + dwmac->sys_mgr_base_addr = sys_mgr_base_addr; + dwmac->dev = dev; + + return 0; +} + +static int socfpga_dwmac_setup(struct socfpga_dwmac *dwmac) +{ + struct regmap *sys_mgr_base_addr = dwmac->sys_mgr_base_addr; + int phymode = dwmac->interface; + u32 reg_offset = dwmac->reg_offset; + u32 reg_shift = dwmac->reg_shift; + u32 ctrl, val; + + switch (phymode) { + case PHY_INTERFACE_MODE_RGMII: + val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII; + break; + case PHY_INTERFACE_MODE_MII: + case PHY_INTERFACE_MODE_GMII: + val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII; + break; + default: + dev_err(dwmac->dev, "bad phy mode %d\n", phymode); + return -EINVAL; + } + + regmap_read(sys_mgr_base_addr, reg_offset, &ctrl); + ctrl &= ~(SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << reg_shift); + ctrl |= val << reg_shift; + + regmap_write(sys_mgr_base_addr, reg_offset, ctrl); + return 0; +} + +static void *socfpga_dwmac_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + int ret; + struct socfpga_dwmac *dwmac; + + dwmac = devm_kzalloc(dev, sizeof(*dwmac), GFP_KERNEL); + if (!dwmac) + return ERR_PTR(-ENOMEM); + + ret = socfpga_dwmac_parse_data(dwmac, dev); + if (ret) { + dev_err(dev, "Unable to parse OF data\n"); + return ERR_PTR(ret); + } + + ret = socfpga_dwmac_setup(dwmac); + if (ret) { + dev_err(dev, "couldn't setup SoC glue (%d)\n", ret); + return ERR_PTR(ret); + } + + return dwmac; +} + +const struct stmmac_of_data socfpga_gmac_data = { + .setup = socfpga_dwmac_probe, +}; diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c new file mode 100644 index 00000000000..552bbc17863 --- /dev/null +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c @@ -0,0 +1,330 @@ +/** + * dwmac-sti.c - STMicroelectronics DWMAC Specific Glue layer + * + * Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited + * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/stmmac.h> +#include <linux/phy.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> +#include <linux/clk.h> +#include <linux/of.h> +#include <linux/of_net.h> + +/** + * STi GMAC glue logic. + * -------------------- + * + * _ + * | \ + * --------|0 \ ETH_SEL_INTERNAL_NOTEXT_PHYCLK + * phyclk | |___________________________________________ + * | | | (phyclk-in) + * --------|1 / | + * int-clk |_ / | + * | _ + * | | \ + * |_______|1 \ ETH_SEL_TX_RETIME_CLK + * | |___________________________ + * | | (tx-retime-clk) + * _______|0 / + * | |_ / + * _ | + * | \ | + * --------|0 \ | + * clk_125 | |__| + * | | ETH_SEL_TXCLK_NOT_CLK125 + * --------|1 / + * txclk |_ / + * + * + * ETH_SEL_INTERNAL_NOTEXT_PHYCLK is valid only for RMII where PHY can + * generate 50MHz clock or MAC can generate it. + * This bit is configured by "st,ext-phyclk" property. + * + * ETH_SEL_TXCLK_NOT_CLK125 is only valid for gigabit modes, where the 125Mhz + * clock either comes from clk-125 pin or txclk pin. This configuration is + * totally driven by the board wiring. This bit is configured by + * "st,tx-retime-src" property. + * + * TXCLK configuration is different for different phy interface modes + * and changes according to link speed in modes like RGMII. + * + * Below table summarizes the clock requirement and clock sources for + * supported phy interface modes with link speeds. + * ________________________________________________ + *| PHY_MODE | 1000 Mbit Link | 100 Mbit Link | + * ------------------------------------------------ + *| MII | n/a | 25Mhz | + *| | | txclk | + * ------------------------------------------------ + *| GMII | 125Mhz | 25Mhz | + *| | clk-125/txclk | txclk | + * ------------------------------------------------ + *| RGMII | 125Mhz | 25Mhz | + *| | clk-125/txclk | clkgen | + * ------------------------------------------------ + *| RMII | n/a | 25Mhz | + *| | |clkgen/phyclk-in | + * ------------------------------------------------ + * + * TX lines are always retimed with a clk, which can vary depending + * on the board configuration. Below is the table of these bits + * in eth configuration register depending on source of retime clk. + * + *--------------------------------------------------------------- + * src | tx_rt_clk | int_not_ext_phyclk | txclk_n_clk125| + *--------------------------------------------------------------- + * txclk | 0 | n/a | 1 | + *--------------------------------------------------------------- + * ck_125| 0 | n/a | 0 | + *--------------------------------------------------------------- + * phyclk| 1 | 0 | n/a | + *--------------------------------------------------------------- + * clkgen| 1 | 1 | n/a | + *--------------------------------------------------------------- + */ + + /* Register definition */ + + /* 3 bits [8:6] + * [6:6] ETH_SEL_TXCLK_NOT_CLK125 + * [7:7] ETH_SEL_INTERNAL_NOTEXT_PHYCLK + * [8:8] ETH_SEL_TX_RETIME_CLK + * + */ + +#define TX_RETIME_SRC_MASK GENMASK(8, 6) +#define ETH_SEL_TX_RETIME_CLK BIT(8) +#define ETH_SEL_INTERNAL_NOTEXT_PHYCLK BIT(7) +#define ETH_SEL_TXCLK_NOT_CLK125 BIT(6) + +#define ENMII_MASK GENMASK(5, 5) +#define ENMII BIT(5) + +/** + * 3 bits [4:2] + * 000-GMII/MII + * 001-RGMII + * 010-SGMII + * 100-RMII +*/ +#define MII_PHY_SEL_MASK GENMASK(4, 2) +#define ETH_PHY_SEL_RMII BIT(4) +#define ETH_PHY_SEL_SGMII BIT(3) +#define ETH_PHY_SEL_RGMII BIT(2) +#define ETH_PHY_SEL_GMII 0x0 +#define ETH_PHY_SEL_MII 0x0 + +#define IS_PHY_IF_MODE_RGMII(iface) (iface == PHY_INTERFACE_MODE_RGMII || \ + iface == PHY_INTERFACE_MODE_RGMII_ID || \ + iface == PHY_INTERFACE_MODE_RGMII_RXID || \ + iface == PHY_INTERFACE_MODE_RGMII_TXID) + +#define IS_PHY_IF_MODE_GBIT(iface) (IS_PHY_IF_MODE_RGMII(iface) || \ + iface == PHY_INTERFACE_MODE_GMII) + +struct sti_dwmac { + int interface; + bool ext_phyclk; + bool is_tx_retime_src_clk_125; + struct clk *clk; + int reg; + struct device *dev; + struct regmap *regmap; +}; + +static u32 phy_intf_sels[] = { + [PHY_INTERFACE_MODE_MII] = ETH_PHY_SEL_MII, + [PHY_INTERFACE_MODE_GMII] = ETH_PHY_SEL_GMII, + [PHY_INTERFACE_MODE_RGMII] = ETH_PHY_SEL_RGMII, + [PHY_INTERFACE_MODE_RGMII_ID] = ETH_PHY_SEL_RGMII, + [PHY_INTERFACE_MODE_SGMII] = ETH_PHY_SEL_SGMII, + [PHY_INTERFACE_MODE_RMII] = ETH_PHY_SEL_RMII, +}; + +enum { + TX_RETIME_SRC_NA = 0, + TX_RETIME_SRC_TXCLK = 1, + TX_RETIME_SRC_CLK_125, + TX_RETIME_SRC_PHYCLK, + TX_RETIME_SRC_CLKGEN, +}; + +static const char *const tx_retime_srcs[] = { + [TX_RETIME_SRC_NA] = "", + [TX_RETIME_SRC_TXCLK] = "txclk", + [TX_RETIME_SRC_CLK_125] = "clk_125", + [TX_RETIME_SRC_PHYCLK] = "phyclk", + [TX_RETIME_SRC_CLKGEN] = "clkgen", +}; + +static u32 tx_retime_val[] = { + [TX_RETIME_SRC_TXCLK] = ETH_SEL_TXCLK_NOT_CLK125, + [TX_RETIME_SRC_CLK_125] = 0x0, + [TX_RETIME_SRC_PHYCLK] = ETH_SEL_TX_RETIME_CLK, + [TX_RETIME_SRC_CLKGEN] = ETH_SEL_TX_RETIME_CLK | + ETH_SEL_INTERNAL_NOTEXT_PHYCLK, +}; + +static void setup_retime_src(struct sti_dwmac *dwmac, u32 spd) +{ + u32 src = 0, freq = 0; + + if (spd == SPEED_100) { + if (dwmac->interface == PHY_INTERFACE_MODE_MII || + dwmac->interface == PHY_INTERFACE_MODE_GMII) { + src = TX_RETIME_SRC_TXCLK; + } else if (dwmac->interface == PHY_INTERFACE_MODE_RMII) { + if (dwmac->ext_phyclk) { + src = TX_RETIME_SRC_PHYCLK; + } else { + src = TX_RETIME_SRC_CLKGEN; + freq = 50000000; + } + + } else if (IS_PHY_IF_MODE_RGMII(dwmac->interface)) { + src = TX_RETIME_SRC_CLKGEN; + freq = 25000000; + } + + if (src == TX_RETIME_SRC_CLKGEN && dwmac->clk) + clk_set_rate(dwmac->clk, freq); + + } else if (spd == SPEED_1000) { + if (dwmac->is_tx_retime_src_clk_125) + src = TX_RETIME_SRC_CLK_125; + else + src = TX_RETIME_SRC_TXCLK; + } + + regmap_update_bits(dwmac->regmap, dwmac->reg, + TX_RETIME_SRC_MASK, tx_retime_val[src]); +} + +static void sti_dwmac_exit(struct platform_device *pdev, void *priv) +{ + struct sti_dwmac *dwmac = priv; + + if (dwmac->clk) + clk_disable_unprepare(dwmac->clk); +} + +static void sti_fix_mac_speed(void *priv, unsigned int spd) +{ + struct sti_dwmac *dwmac = priv; + + setup_retime_src(dwmac, spd); + + return; +} + +static int sti_dwmac_parse_data(struct sti_dwmac *dwmac, + struct platform_device *pdev) +{ + struct resource *res; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct regmap *regmap; + int err; + + if (!np) + return -EINVAL; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sti-ethconf"); + if (!res) + return -ENODATA; + + regmap = syscon_regmap_lookup_by_phandle(np, "st,syscon"); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + dwmac->dev = dev; + dwmac->interface = of_get_phy_mode(np); + dwmac->regmap = regmap; + dwmac->reg = res->start; + dwmac->ext_phyclk = of_property_read_bool(np, "st,ext-phyclk"); + dwmac->is_tx_retime_src_clk_125 = false; + + if (IS_PHY_IF_MODE_GBIT(dwmac->interface)) { + const char *rs; + + err = of_property_read_string(np, "st,tx-retime-src", &rs); + if (err < 0) { + dev_err(dev, "st,tx-retime-src not specified\n"); + return err; + } + + if (!strcasecmp(rs, "clk_125")) + dwmac->is_tx_retime_src_clk_125 = true; + } + + dwmac->clk = devm_clk_get(dev, "sti-ethclk"); + + if (IS_ERR(dwmac->clk)) + dwmac->clk = NULL; + + return 0; +} + +static int sti_dwmac_init(struct platform_device *pdev, void *priv) +{ + struct sti_dwmac *dwmac = priv; + struct regmap *regmap = dwmac->regmap; + int iface = dwmac->interface; + u32 reg = dwmac->reg; + u32 val, spd; + + if (dwmac->clk) + clk_prepare_enable(dwmac->clk); + + regmap_update_bits(regmap, reg, MII_PHY_SEL_MASK, phy_intf_sels[iface]); + + val = (iface == PHY_INTERFACE_MODE_REVMII) ? 0 : ENMII; + regmap_update_bits(regmap, reg, ENMII_MASK, val); + + if (IS_PHY_IF_MODE_GBIT(iface)) + spd = SPEED_1000; + else + spd = SPEED_100; + + setup_retime_src(dwmac, spd); + + return 0; +} + +static void *sti_dwmac_setup(struct platform_device *pdev) +{ + struct sti_dwmac *dwmac; + int ret; + + dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL); + if (!dwmac) + return ERR_PTR(-ENOMEM); + + ret = sti_dwmac_parse_data(dwmac, pdev); + if (ret) { + dev_err(&pdev->dev, "Unable to parse OF data\n"); + return ERR_PTR(ret); + } + + return dwmac; +} + +const struct stmmac_of_data sti_gmac_data = { + .fix_mac_speed = sti_fix_mac_speed, + .setup = sti_dwmac_setup, + .init = sti_dwmac_init, + .exit = sti_dwmac_exit, +}; diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c new file mode 100644 index 00000000000..771cd15fca1 --- /dev/null +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c @@ -0,0 +1,140 @@ +/** + * dwmac-sunxi.c - Allwinner sunxi DWMAC specific glue layer + * + * Copyright (C) 2013 Chen-Yu Tsai + * + * Chen-Yu Tsai <wens@csie.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/stmmac.h> +#include <linux/clk.h> +#include <linux/phy.h> +#include <linux/of_net.h> +#include <linux/regulator/consumer.h> + +struct sunxi_priv_data { + int interface; + int clk_enabled; + struct clk *tx_clk; + struct regulator *regulator; +}; + +static void *sun7i_gmac_setup(struct platform_device *pdev) +{ + struct sunxi_priv_data *gmac; + struct device *dev = &pdev->dev; + + gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL); + if (!gmac) + return ERR_PTR(-ENOMEM); + + gmac->interface = of_get_phy_mode(dev->of_node); + + gmac->tx_clk = devm_clk_get(dev, "allwinner_gmac_tx"); + if (IS_ERR(gmac->tx_clk)) { + dev_err(dev, "could not get tx clock\n"); + return gmac->tx_clk; + } + + /* Optional regulator for PHY */ + gmac->regulator = devm_regulator_get_optional(dev, "phy"); + if (IS_ERR(gmac->regulator)) { + if (PTR_ERR(gmac->regulator) == -EPROBE_DEFER) + return ERR_PTR(-EPROBE_DEFER); + dev_info(dev, "no regulator found\n"); + gmac->regulator = NULL; + } + + return gmac; +} + +#define SUN7I_GMAC_GMII_RGMII_RATE 125000000 +#define SUN7I_GMAC_MII_RATE 25000000 + +static int sun7i_gmac_init(struct platform_device *pdev, void *priv) +{ + struct sunxi_priv_data *gmac = priv; + int ret; + + if (gmac->regulator) { + ret = regulator_enable(gmac->regulator); + if (ret) + return ret; + } + + /* Set GMAC interface port mode + * + * The GMAC TX clock lines are configured by setting the clock + * rate, which then uses the auto-reparenting feature of the + * clock driver, and enabling/disabling the clock. + */ + if (gmac->interface == PHY_INTERFACE_MODE_RGMII) { + clk_set_rate(gmac->tx_clk, SUN7I_GMAC_GMII_RGMII_RATE); + clk_prepare_enable(gmac->tx_clk); + gmac->clk_enabled = 1; + } else { + clk_set_rate(gmac->tx_clk, SUN7I_GMAC_MII_RATE); + clk_prepare(gmac->tx_clk); + } + + return 0; +} + +static void sun7i_gmac_exit(struct platform_device *pdev, void *priv) +{ + struct sunxi_priv_data *gmac = priv; + + if (gmac->clk_enabled) { + clk_disable(gmac->tx_clk); + gmac->clk_enabled = 0; + } + clk_unprepare(gmac->tx_clk); + + if (gmac->regulator) + regulator_disable(gmac->regulator); +} + +static void sun7i_fix_speed(void *priv, unsigned int speed) +{ + struct sunxi_priv_data *gmac = priv; + + /* only GMII mode requires us to reconfigure the clock lines */ + if (gmac->interface != PHY_INTERFACE_MODE_GMII) + return; + + if (gmac->clk_enabled) { + clk_disable(gmac->tx_clk); + gmac->clk_enabled = 0; + } + clk_unprepare(gmac->tx_clk); + + if (speed == 1000) { + clk_set_rate(gmac->tx_clk, SUN7I_GMAC_GMII_RGMII_RATE); + clk_prepare_enable(gmac->tx_clk); + gmac->clk_enabled = 1; + } else { + clk_set_rate(gmac->tx_clk, SUN7I_GMAC_MII_RATE); + clk_prepare(gmac->tx_clk); + } +} + +/* of_data specifying hardware features and callbacks. + * hardware features were copied from Allwinner drivers. */ +const struct stmmac_of_data sun7i_gmac_data = { + .has_gmac = 1, + .tx_coe = 1, + .fix_mac_speed = sun7i_fix_speed, + .setup = sun7i_gmac_setup, + .init = sun7i_gmac_init, + .exit = sun7i_gmac_exit, +}; diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100.h b/drivers/net/ethernet/stmicro/stmmac/dwmac100.h index 7c6d857a9cc..2ec6aeae349 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac100.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100.h @@ -22,6 +22,9 @@ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> *******************************************************************************/ +#ifndef __DWMAC100_H__ +#define __DWMAC100_H__ + #include <linux/phy.h> #include "common.h" @@ -119,3 +122,5 @@ enum ttc_control { #define DMA_MISSED_FRAME_M_CNTR 0x0000ffff /* Missed Frame Couinter */ extern const struct stmmac_dma_ops dwmac100_dma_ops; + +#endif /* __DWMAC100_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h index cfcef0ea0fa..f37d90f114f 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h @@ -19,6 +19,8 @@ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> *******************************************************************************/ +#ifndef __DWMAC1000_H__ +#define __DWMAC1000_H__ #include <linux/phy.h> #include "common.h" @@ -36,6 +38,7 @@ #define GMAC_INT_STATUS 0x00000038 /* interrupt status register */ enum dwmac1000_irq_status { + lpiis_irq = 0x400, time_stamp_irq = 0x0200, mmc_rx_csum_offload_irq = 0x0080, mmc_tx_irq = 0x0040, @@ -60,20 +63,71 @@ enum power_event { power_down = 0x00000001, }; +/* Energy Efficient Ethernet (EEE) + * + * LPI status, timer and control register offset + */ +#define LPI_CTRL_STATUS 0x0030 +#define LPI_TIMER_CTRL 0x0034 + +/* LPI control and status defines */ +#define LPI_CTRL_STATUS_LPITXA 0x00080000 /* Enable LPI TX Automate */ +#define LPI_CTRL_STATUS_PLSEN 0x00040000 /* Enable PHY Link Status */ +#define LPI_CTRL_STATUS_PLS 0x00020000 /* PHY Link Status */ +#define LPI_CTRL_STATUS_LPIEN 0x00010000 /* LPI Enable */ +#define LPI_CTRL_STATUS_RLPIST 0x00000200 /* Receive LPI state */ +#define LPI_CTRL_STATUS_TLPIST 0x00000100 /* Transmit LPI state */ +#define LPI_CTRL_STATUS_RLPIEX 0x00000008 /* Receive LPI Exit */ +#define LPI_CTRL_STATUS_RLPIEN 0x00000004 /* Receive LPI Entry */ +#define LPI_CTRL_STATUS_TLPIEX 0x00000002 /* Transmit LPI Exit */ +#define LPI_CTRL_STATUS_TLPIEN 0x00000001 /* Transmit LPI Entry */ + /* GMAC HW ADDR regs */ -#define GMAC_ADDR_HIGH(reg) (0x00000040+(reg * 8)) -#define GMAC_ADDR_LOW(reg) (0x00000044+(reg * 8)) -#define GMAC_MAX_UNICAST_ADDRESSES 16 +#define GMAC_ADDR_HIGH(reg) (((reg > 15) ? 0x00000800 : 0x00000040) + \ + (reg * 8)) +#define GMAC_ADDR_LOW(reg) (((reg > 15) ? 0x00000804 : 0x00000044) + \ + (reg * 8)) +#define GMAC_MAX_PERFECT_ADDRESSES 32 +/* PCS registers (AN/TBI/SGMII/RGMII) offset */ #define GMAC_AN_CTRL 0x000000c0 /* AN control */ #define GMAC_AN_STATUS 0x000000c4 /* AN status */ #define GMAC_ANE_ADV 0x000000c8 /* Auto-Neg. Advertisement */ -#define GMAC_ANE_LINK 0x000000cc /* Auto-Neg. link partener ability */ +#define GMAC_ANE_LPA 0x000000cc /* Auto-Neg. link partener ability */ #define GMAC_ANE_EXP 0x000000d0 /* ANE expansion */ #define GMAC_TBI 0x000000d4 /* TBI extend status */ -#define GMAC_GMII_STATUS 0x000000d8 /* S/R-GMII status */ +#define GMAC_S_R_GMII 0x000000d8 /* SGMII RGMII status */ + +/* AN Configuration defines */ +#define GMAC_AN_CTRL_RAN 0x00000200 /* Restart Auto-Negotiation */ +#define GMAC_AN_CTRL_ANE 0x00001000 /* Auto-Negotiation Enable */ +#define GMAC_AN_CTRL_ELE 0x00004000 /* External Loopback Enable */ +#define GMAC_AN_CTRL_ECD 0x00010000 /* Enable Comma Detect */ +#define GMAC_AN_CTRL_LR 0x00020000 /* Lock to Reference */ +#define GMAC_AN_CTRL_SGMRAL 0x00040000 /* SGMII RAL Control */ + +/* AN Status defines */ +#define GMAC_AN_STATUS_LS 0x00000004 /* Link Status 0:down 1:up */ +#define GMAC_AN_STATUS_ANA 0x00000008 /* Auto-Negotiation Ability */ +#define GMAC_AN_STATUS_ANC 0x00000020 /* Auto-Negotiation Complete */ +#define GMAC_AN_STATUS_ES 0x00000100 /* Extended Status */ + +/* Register 54 (SGMII/RGMII status register) */ +#define GMAC_S_R_GMII_LINK 0x8 +#define GMAC_S_R_GMII_SPEED 0x5 +#define GMAC_S_R_GMII_SPEED_SHIFT 0x1 +#define GMAC_S_R_GMII_MODE 0x1 +#define GMAC_S_R_GMII_SPEED_125 2 +#define GMAC_S_R_GMII_SPEED_25 1 + +/* Common ADV and LPA defines */ +#define GMAC_ANE_FD (1 << 5) +#define GMAC_ANE_HD (1 << 6) +#define GMAC_ANE_PSE (3 << 7) +#define GMAC_ANE_PSE_SHIFT 7 /* GMAC Configuration defines */ +#define GMAC_CONTROL_2K 0x08000000 /* IEEE 802.3as 2K packets */ #define GMAC_CONTROL_TC 0x01000000 /* Transmit Conf. in RGMII/SGMII */ #define GMAC_CONTROL_WD 0x00800000 /* Disable Watchdog on receive */ #define GMAC_CONTROL_JD 0x00400000 /* Jabber disable */ @@ -84,22 +138,22 @@ enum inter_frame_gap { GMAC_CONTROL_IFG_80 = 0x00020000, GMAC_CONTROL_IFG_40 = 0x000e0000, }; -#define GMAC_CONTROL_DCRS 0x00010000 /* Disable carrier sense during tx */ -#define GMAC_CONTROL_PS 0x00008000 /* Port Select 0:GMI 1:MII */ -#define GMAC_CONTROL_FES 0x00004000 /* Speed 0:10 1:100 */ -#define GMAC_CONTROL_DO 0x00002000 /* Disable Rx Own */ -#define GMAC_CONTROL_LM 0x00001000 /* Loop-back mode */ -#define GMAC_CONTROL_DM 0x00000800 /* Duplex Mode */ -#define GMAC_CONTROL_IPC 0x00000400 /* Checksum Offload */ -#define GMAC_CONTROL_DR 0x00000200 /* Disable Retry */ -#define GMAC_CONTROL_LUD 0x00000100 /* Link up/down */ -#define GMAC_CONTROL_ACS 0x00000080 /* Automatic Pad/FCS Stripping */ -#define GMAC_CONTROL_DC 0x00000010 /* Deferral Check */ -#define GMAC_CONTROL_TE 0x00000008 /* Transmitter Enable */ -#define GMAC_CONTROL_RE 0x00000004 /* Receiver Enable */ +#define GMAC_CONTROL_DCRS 0x00010000 /* Disable carrier sense */ +#define GMAC_CONTROL_PS 0x00008000 /* Port Select 0:GMI 1:MII */ +#define GMAC_CONTROL_FES 0x00004000 /* Speed 0:10 1:100 */ +#define GMAC_CONTROL_DO 0x00002000 /* Disable Rx Own */ +#define GMAC_CONTROL_LM 0x00001000 /* Loop-back mode */ +#define GMAC_CONTROL_DM 0x00000800 /* Duplex Mode */ +#define GMAC_CONTROL_IPC 0x00000400 /* Checksum Offload */ +#define GMAC_CONTROL_DR 0x00000200 /* Disable Retry */ +#define GMAC_CONTROL_LUD 0x00000100 /* Link up/down */ +#define GMAC_CONTROL_ACS 0x00000080 /* Auto Pad/FCS Stripping */ +#define GMAC_CONTROL_DC 0x00000010 /* Deferral Check */ +#define GMAC_CONTROL_TE 0x00000008 /* Transmitter Enable */ +#define GMAC_CONTROL_RE 0x00000004 /* Receiver Enable */ #define GMAC_CORE_INIT (GMAC_CONTROL_JD | GMAC_CONTROL_PS | GMAC_CONTROL_ACS | \ - GMAC_CONTROL_JE | GMAC_CONTROL_BE) + GMAC_CONTROL_BE) /* GMAC Frame Filter defines */ #define GMAC_FRAME_FILTER_PR 0x00000001 /* Promiscuous Mode */ @@ -127,22 +181,24 @@ enum inter_frame_gap { #define DMA_BUS_MODE_SFT_RESET 0x00000001 /* Software Reset */ #define DMA_BUS_MODE_DA 0x00000002 /* Arbitration scheme */ #define DMA_BUS_MODE_DSL_MASK 0x0000007c /* Descriptor Skip Length */ -#define DMA_BUS_MODE_DSL_SHIFT 2 /* (in DWORDS) */ +#define DMA_BUS_MODE_DSL_SHIFT 2 /* (in DWORDS) */ /* Programmable burst length (passed thorugh platform)*/ #define DMA_BUS_MODE_PBL_MASK 0x00003f00 /* Programmable Burst Len */ #define DMA_BUS_MODE_PBL_SHIFT 8 +#define DMA_BUS_MODE_ATDS 0x00000080 /* Alternate Descriptor Size */ enum rx_tx_priority_ratio { - double_ratio = 0x00004000, /*2:1 */ - triple_ratio = 0x00008000, /*3:1 */ - quadruple_ratio = 0x0000c000, /*4:1 */ + double_ratio = 0x00004000, /* 2:1 */ + triple_ratio = 0x00008000, /* 3:1 */ + quadruple_ratio = 0x0000c000, /* 4:1 */ }; #define DMA_BUS_MODE_FB 0x00010000 /* Fixed burst */ +#define DMA_BUS_MODE_MB 0x04000000 /* Mixed burst */ #define DMA_BUS_MODE_RPBL_MASK 0x003e0000 /* Rx-Programmable Burst Len */ #define DMA_BUS_MODE_RPBL_SHIFT 17 #define DMA_BUS_MODE_USP 0x00800000 -#define DMA_BUS_MODE_4PBL 0x01000000 +#define DMA_BUS_MODE_PBL 0x01000000 #define DMA_BUS_MODE_AAL 0x02000000 /* DMA CRS Control and Status Register Mapping */ @@ -154,9 +210,10 @@ enum rx_tx_priority_ratio { #define DMA_BUS_FB 0x00010000 /* Fixed Burst */ /* DMA operation mode defines (start/stop tx/rx are placed in common header)*/ -#define DMA_CONTROL_DT 0x04000000 /* Disable Drop TCP/IP csum error */ -#define DMA_CONTROL_RSF 0x02000000 /* Receive Store and Forward */ -#define DMA_CONTROL_DFF 0x01000000 /* Disaable flushing */ +/* Disable Drop TCP/IP csum error */ +#define DMA_CONTROL_DT 0x04000000 +#define DMA_CONTROL_RSF 0x02000000 /* Receive Store and Forward */ +#define DMA_CONTROL_DFF 0x01000000 /* Disaable flushing */ /* Threshold for Activating the FC */ enum rfa { act_full_minus_1 = 0x00800000, @@ -171,7 +228,7 @@ enum rfd { deac_full_minus_3 = 0x00401000, deac_full_minus_4 = 0x00401800, }; -#define DMA_CONTROL_TSF 0x00200000 /* Transmit Store and Forward */ +#define DMA_CONTROL_TSF 0x00200000 /* Transmit Store and Forward */ enum ttc_control { DMA_CONTROL_TTC_64 = 0x00000000, @@ -206,3 +263,4 @@ enum rtc_control { #define GMAC_MMC_RX_CSUM_OFFLOAD 0x208 extern const struct stmmac_dma_ops dwmac1000_dma_ops; +#endif /* __DWMAC1000_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c index b1c48b97594..9d3748361a1 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c @@ -28,13 +28,19 @@ #include <linux/crc32.h> #include <linux/slab.h> +#include <linux/ethtool.h> #include <asm/io.h> #include "dwmac1000.h" -static void dwmac1000_core_init(void __iomem *ioaddr) +static void dwmac1000_core_init(void __iomem *ioaddr, int mtu) { u32 value = readl(ioaddr + GMAC_CONTROL); value |= GMAC_CORE_INIT; + if (mtu > 1500) + value |= GMAC_CONTROL_2K; + if (mtu > 2000) + value |= GMAC_CONTROL_JE; + writel(value, ioaddr + GMAC_CONTROL); /* Mask GMAC interrupts */ @@ -46,7 +52,7 @@ static void dwmac1000_core_init(void __iomem *ioaddr) #endif } -static int dwmac1000_rx_coe_supported(void __iomem *ioaddr) +static int dwmac1000_rx_ipc_enable(void __iomem *ioaddr) { u32 value = readl(ioaddr + GMAC_CONTROL); @@ -71,31 +77,32 @@ static void dwmac1000_dump_regs(void __iomem *ioaddr) } static void dwmac1000_set_umac_addr(void __iomem *ioaddr, unsigned char *addr, - unsigned int reg_n) + unsigned int reg_n) { stmmac_set_mac_addr(ioaddr, addr, GMAC_ADDR_HIGH(reg_n), - GMAC_ADDR_LOW(reg_n)); + GMAC_ADDR_LOW(reg_n)); } static void dwmac1000_get_umac_addr(void __iomem *ioaddr, unsigned char *addr, - unsigned int reg_n) + unsigned int reg_n) { stmmac_get_mac_addr(ioaddr, addr, GMAC_ADDR_HIGH(reg_n), - GMAC_ADDR_LOW(reg_n)); + GMAC_ADDR_LOW(reg_n)); } -static void dwmac1000_set_filter(struct net_device *dev) +static void dwmac1000_set_filter(struct net_device *dev, int id) { - void __iomem *ioaddr = (void __iomem *) dev->base_addr; + void __iomem *ioaddr = (void __iomem *)dev->base_addr; unsigned int value = 0; + unsigned int perfect_addr_number; - CHIP_DBG(KERN_INFO "%s: # mcasts %d, # unicast %d\n", - __func__, netdev_mc_count(dev), netdev_uc_count(dev)); + pr_debug("%s: # mcasts %d, # unicast %d\n", __func__, + netdev_mc_count(dev), netdev_uc_count(dev)); if (dev->flags & IFF_PROMISC) value = GMAC_FRAME_FILTER_PR; else if ((netdev_mc_count(dev) > HASH_TABLE_SIZE) - || (dev->flags & IFF_ALLMULTI)) { + || (dev->flags & IFF_ALLMULTI)) { value = GMAC_FRAME_FILTER_PM; /* pass all multi */ writel(0xffffffff, ioaddr + GMAC_HASH_HIGH); writel(0xffffffff, ioaddr + GMAC_HASH_LOW); @@ -109,22 +116,30 @@ static void dwmac1000_set_filter(struct net_device *dev) memset(mc_filter, 0, sizeof(mc_filter)); netdev_for_each_mc_addr(ha, dev) { /* The upper 6 bits of the calculated CRC are used to - index the contens of the hash table */ - int bit_nr = - bitrev32(~crc32_le(~0, ha->addr, 6)) >> 26; + * index the contens of the hash table + */ + int bit_nr = bitrev32(~crc32_le(~0, ha->addr, 6)) >> 26; /* The most significant bit determines the register to * use (H/L) while the other 5 bits determine the bit - * within the register. */ + * within the register. + */ mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); } writel(mc_filter[0], ioaddr + GMAC_HASH_LOW); writel(mc_filter[1], ioaddr + GMAC_HASH_HIGH); } - /* Handle multiple unicast addresses (perfect filtering)*/ - if (netdev_uc_count(dev) > GMAC_MAX_UNICAST_ADDRESSES) - /* Switch to promiscuous mode is more than 16 addrs - are required */ + /* Extra 16 regs are available in cores newer than the 3.40. */ + if (id > DWMAC_CORE_3_40) + perfect_addr_number = GMAC_MAX_PERFECT_ADDRESSES; + else + perfect_addr_number = GMAC_MAX_PERFECT_ADDRESSES / 2; + + /* Handle multiple unicast addresses (perfect filtering) */ + if (netdev_uc_count(dev) > perfect_addr_number) + /* Switch to promiscuous mode if more than 16 addrs + * are required + */ value |= GMAC_FRAME_FILTER_PR; else { int reg = 1; @@ -142,28 +157,28 @@ static void dwmac1000_set_filter(struct net_device *dev) #endif writel(value, ioaddr + GMAC_FRAME_FILTER); - CHIP_DBG(KERN_INFO "\tFrame Filter reg: 0x%08x\n\tHash regs: " - "HI 0x%08x, LO 0x%08x\n", readl(ioaddr + GMAC_FRAME_FILTER), - readl(ioaddr + GMAC_HASH_HIGH), readl(ioaddr + GMAC_HASH_LOW)); + pr_debug("\tFilter: 0x%08x\n\tHash: HI 0x%08x, LO 0x%08x\n", + readl(ioaddr + GMAC_FRAME_FILTER), + readl(ioaddr + GMAC_HASH_HIGH), readl(ioaddr + GMAC_HASH_LOW)); } static void dwmac1000_flow_ctrl(void __iomem *ioaddr, unsigned int duplex, - unsigned int fc, unsigned int pause_time) + unsigned int fc, unsigned int pause_time) { unsigned int flow = 0; - CHIP_DBG(KERN_DEBUG "GMAC Flow-Control:\n"); + pr_debug("GMAC Flow-Control:\n"); if (fc & FLOW_RX) { - CHIP_DBG(KERN_DEBUG "\tReceive Flow-Control ON\n"); + pr_debug("\tReceive Flow-Control ON\n"); flow |= GMAC_FLOW_CTRL_RFE; } if (fc & FLOW_TX) { - CHIP_DBG(KERN_DEBUG "\tTransmit Flow-Control ON\n"); + pr_debug("\tTransmit Flow-Control ON\n"); flow |= GMAC_FLOW_CTRL_TFE; } if (duplex) { - CHIP_DBG(KERN_DEBUG "\tduplex mode: PAUSE %d\n", pause_time); + pr_debug("\tduplex mode: PAUSE %d\n", pause_time); flow |= (pause_time << GMAC_FLOW_CTRL_PT_SHIFT); } @@ -175,43 +190,169 @@ static void dwmac1000_pmt(void __iomem *ioaddr, unsigned long mode) unsigned int pmt = 0; if (mode & WAKE_MAGIC) { - CHIP_DBG(KERN_DEBUG "GMAC: WOL Magic frame\n"); + pr_debug("GMAC: WOL Magic frame\n"); pmt |= power_down | magic_pkt_en; } if (mode & WAKE_UCAST) { - CHIP_DBG(KERN_DEBUG "GMAC: WOL on global unicast\n"); + pr_debug("GMAC: WOL on global unicast\n"); pmt |= global_unicast; } writel(pmt, ioaddr + GMAC_PMT); } - -static void dwmac1000_irq_status(void __iomem *ioaddr) +static int dwmac1000_irq_status(void __iomem *ioaddr, + struct stmmac_extra_stats *x) { u32 intr_status = readl(ioaddr + GMAC_INT_STATUS); + int ret = 0; /* Not used events (e.g. MMC interrupts) are not handled. */ if ((intr_status & mmc_tx_irq)) - CHIP_DBG(KERN_DEBUG "GMAC: MMC tx interrupt: 0x%08x\n", - readl(ioaddr + GMAC_MMC_TX_INTR)); + x->mmc_tx_irq_n++; if (unlikely(intr_status & mmc_rx_irq)) - CHIP_DBG(KERN_DEBUG "GMAC: MMC rx interrupt: 0x%08x\n", - readl(ioaddr + GMAC_MMC_RX_INTR)); + x->mmc_rx_irq_n++; if (unlikely(intr_status & mmc_rx_csum_offload_irq)) - CHIP_DBG(KERN_DEBUG "GMAC: MMC rx csum offload: 0x%08x\n", - readl(ioaddr + GMAC_MMC_RX_CSUM_OFFLOAD)); + x->mmc_rx_csum_offload_irq_n++; if (unlikely(intr_status & pmt_irq)) { - CHIP_DBG(KERN_DEBUG "GMAC: received Magic frame\n"); - /* clear the PMT bits 5 and 6 by reading the PMT - * status register. */ + /* clear the PMT bits 5 and 6 by reading the PMT status reg */ readl(ioaddr + GMAC_PMT); + x->irq_receive_pmt_irq_n++; + } + /* MAC trx/rx EEE LPI entry/exit interrupts */ + if (intr_status & lpiis_irq) { + /* Clean LPI interrupt by reading the Reg 12 */ + ret = readl(ioaddr + LPI_CTRL_STATUS); + + if (ret & LPI_CTRL_STATUS_TLPIEN) + x->irq_tx_path_in_lpi_mode_n++; + if (ret & LPI_CTRL_STATUS_TLPIEX) + x->irq_tx_path_exit_lpi_mode_n++; + if (ret & LPI_CTRL_STATUS_RLPIEN) + x->irq_rx_path_in_lpi_mode_n++; + if (ret & LPI_CTRL_STATUS_RLPIEX) + x->irq_rx_path_exit_lpi_mode_n++; + } + + if ((intr_status & pcs_ane_irq) || (intr_status & pcs_link_irq)) { + readl(ioaddr + GMAC_AN_STATUS); + x->irq_pcs_ane_n++; } + if (intr_status & rgmii_irq) { + u32 status = readl(ioaddr + GMAC_S_R_GMII); + x->irq_rgmii_n++; + + /* Save and dump the link status. */ + if (status & GMAC_S_R_GMII_LINK) { + int speed_value = (status & GMAC_S_R_GMII_SPEED) >> + GMAC_S_R_GMII_SPEED_SHIFT; + x->pcs_duplex = (status & GMAC_S_R_GMII_MODE); + + if (speed_value == GMAC_S_R_GMII_SPEED_125) + x->pcs_speed = SPEED_1000; + else if (speed_value == GMAC_S_R_GMII_SPEED_25) + x->pcs_speed = SPEED_100; + else + x->pcs_speed = SPEED_10; + + x->pcs_link = 1; + pr_debug("%s: Link is Up - %d/%s\n", __func__, + (int)x->pcs_speed, + x->pcs_duplex ? "Full" : "Half"); + } else { + x->pcs_link = 0; + pr_debug("%s: Link is Down\n", __func__); + } + } + + return ret; +} + +static void dwmac1000_set_eee_mode(void __iomem *ioaddr) +{ + u32 value; + + /* Enable the link status receive on RGMII, SGMII ore SMII + * receive path and instruct the transmit to enter in LPI + * state. + */ + value = readl(ioaddr + LPI_CTRL_STATUS); + value |= LPI_CTRL_STATUS_LPIEN | LPI_CTRL_STATUS_LPITXA; + writel(value, ioaddr + LPI_CTRL_STATUS); +} + +static void dwmac1000_reset_eee_mode(void __iomem *ioaddr) +{ + u32 value; + + value = readl(ioaddr + LPI_CTRL_STATUS); + value &= ~(LPI_CTRL_STATUS_LPIEN | LPI_CTRL_STATUS_LPITXA); + writel(value, ioaddr + LPI_CTRL_STATUS); +} + +static void dwmac1000_set_eee_pls(void __iomem *ioaddr, int link) +{ + u32 value; + + value = readl(ioaddr + LPI_CTRL_STATUS); + + if (link) + value |= LPI_CTRL_STATUS_PLS; + else + value &= ~LPI_CTRL_STATUS_PLS; + + writel(value, ioaddr + LPI_CTRL_STATUS); +} + +static void dwmac1000_set_eee_timer(void __iomem *ioaddr, int ls, int tw) +{ + int value = ((tw & 0xffff)) | ((ls & 0x7ff) << 16); + + /* Program the timers in the LPI timer control register: + * LS: minimum time (ms) for which the link + * status from PHY should be ok before transmitting + * the LPI pattern. + * TW: minimum time (us) for which the core waits + * after it has stopped transmitting the LPI pattern. + */ + writel(value, ioaddr + LPI_TIMER_CTRL); +} + +static void dwmac1000_ctrl_ane(void __iomem *ioaddr, bool restart) +{ + /* auto negotiation enable and External Loopback enable */ + u32 value = GMAC_AN_CTRL_ANE | GMAC_AN_CTRL_ELE; + + if (restart) + value |= GMAC_AN_CTRL_RAN; + + writel(value, ioaddr + GMAC_AN_CTRL); +} + +static void dwmac1000_get_adv(void __iomem *ioaddr, struct rgmii_adv *adv) +{ + u32 value = readl(ioaddr + GMAC_ANE_ADV); + + if (value & GMAC_ANE_FD) + adv->duplex = DUPLEX_FULL; + if (value & GMAC_ANE_HD) + adv->duplex |= DUPLEX_HALF; + + adv->pause = (value & GMAC_ANE_PSE) >> GMAC_ANE_PSE_SHIFT; + + value = readl(ioaddr + GMAC_ANE_LPA); + + if (value & GMAC_ANE_FD) + adv->lp_duplex = DUPLEX_FULL; + if (value & GMAC_ANE_HD) + adv->lp_duplex = DUPLEX_HALF; + + adv->lp_pause = (value & GMAC_ANE_PSE) >> GMAC_ANE_PSE_SHIFT; } static const struct stmmac_ops dwmac1000_ops = { .core_init = dwmac1000_core_init, - .rx_coe = dwmac1000_rx_coe_supported, + .rx_ipc = dwmac1000_rx_ipc_enable, .dump_regs = dwmac1000_dump_regs, .host_irq_status = dwmac1000_irq_status, .set_filter = dwmac1000_set_filter, @@ -219,6 +360,12 @@ static const struct stmmac_ops dwmac1000_ops = { .pmt = dwmac1000_pmt, .set_umac_addr = dwmac1000_set_umac_addr, .get_umac_addr = dwmac1000_get_umac_addr, + .set_eee_mode = dwmac1000_set_eee_mode, + .reset_eee_mode = dwmac1000_reset_eee_mode, + .set_eee_timer = dwmac1000_set_eee_timer, + .set_eee_pls = dwmac1000_set_eee_pls, + .ctrl_ane = dwmac1000_ctrl_ane, + .get_adv = dwmac1000_get_adv, }; struct mac_device_info *dwmac1000_setup(void __iomem *ioaddr) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c index 4d5402a1d26..0c2058a69fd 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c @@ -30,8 +30,8 @@ #include "dwmac1000.h" #include "dwmac_dma.h" -static int dwmac1000_dma_init(void __iomem *ioaddr, int pbl, u32 dma_tx, - u32 dma_rx) +static int dwmac1000_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb, + int burst_len, u32 dma_tx, u32 dma_rx, int atds) { u32 value = readl(ioaddr + DMA_BUS_MODE); int limit; @@ -48,20 +48,62 @@ static int dwmac1000_dma_init(void __iomem *ioaddr, int pbl, u32 dma_tx, if (limit < 0) return -EBUSY; - value = /* DMA_BUS_MODE_FB | */ DMA_BUS_MODE_4PBL | - ((pbl << DMA_BUS_MODE_PBL_SHIFT) | - (pbl << DMA_BUS_MODE_RPBL_SHIFT)); + /* + * Set the DMA PBL (Programmable Burst Length) mode + * Before stmmac core 3.50 this mode bit was 4xPBL, and + * post 3.5 mode bit acts as 8*PBL. + * For core rev < 3.5, when the core is set for 4xPBL mode, the + * DMA transfers the data in 4, 8, 16, 32, 64 & 128 beats + * depending on pbl value. + * For core rev > 3.5, when the core is set for 8xPBL mode, the + * DMA transfers the data in 8, 16, 32, 64, 128 & 256 beats + * depending on pbl value. + */ + value = DMA_BUS_MODE_PBL | ((pbl << DMA_BUS_MODE_PBL_SHIFT) | + (pbl << DMA_BUS_MODE_RPBL_SHIFT)); + + /* Set the Fixed burst mode */ + if (fb) + value |= DMA_BUS_MODE_FB; + + /* Mixed Burst has no effect when fb is set */ + if (mb) + value |= DMA_BUS_MODE_MB; #ifdef CONFIG_STMMAC_DA value |= DMA_BUS_MODE_DA; /* Rx has priority over tx */ #endif + + if (atds) + value |= DMA_BUS_MODE_ATDS; + writel(value, ioaddr + DMA_BUS_MODE); + /* In case of GMAC AXI configuration, program the DMA_AXI_BUS_MODE + * for supported bursts. + * + * Note: This is applicable only for revision GMACv3.61a. For + * older version this register is reserved and shall have no + * effect. + * + * Note: + * For Fixed Burst Mode: if we directly write 0xFF to this + * register using the configurations pass from platform code, + * this would ensure that all bursts supported by core are set + * and those which are not supported would remain ineffective. + * + * For Non Fixed Burst Mode: provide the maximum value of the + * burst length. Any burst equal or below the provided burst + * length would be allowed to perform. + */ + writel(burst_len, ioaddr + DMA_AXI_BUS_MODE); + /* Mask interrupts by writing to CSR7 */ writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA); - /* The base address of the RX/TX descriptor lists must be written into - * DMA CSR3 and CSR4, respectively. */ + /* RX/TX descriptor base address lists must be written into + * DMA CSR3 and CSR4, respectively + */ writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR); writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR); @@ -69,20 +111,20 @@ static int dwmac1000_dma_init(void __iomem *ioaddr, int pbl, u32 dma_tx, } static void dwmac1000_dma_operation_mode(void __iomem *ioaddr, int txmode, - int rxmode) + int rxmode) { u32 csr6 = readl(ioaddr + DMA_CONTROL); if (txmode == SF_DMA_MODE) { - CHIP_DBG(KERN_DEBUG "GMAC: enable TX store and forward mode\n"); + pr_debug("GMAC: enable TX store and forward mode\n"); /* Transmit COE type 2 cannot be done in cut-through mode. */ csr6 |= DMA_CONTROL_TSF; /* Operating on second frame increase the performance - * especially when transmit store-and-forward is used.*/ + * especially when transmit store-and-forward is used. + */ csr6 |= DMA_CONTROL_OSF; } else { - CHIP_DBG(KERN_DEBUG "GMAC: disabling TX store and forward mode" - " (threshold = %d)\n", txmode); + pr_debug("GMAC: disabling TX SF (threshold %d)\n", txmode); csr6 &= ~DMA_CONTROL_TSF; csr6 &= DMA_CONTROL_TC_TX_MASK; /* Set the transmit threshold */ @@ -99,11 +141,10 @@ static void dwmac1000_dma_operation_mode(void __iomem *ioaddr, int txmode, } if (rxmode == SF_DMA_MODE) { - CHIP_DBG(KERN_DEBUG "GMAC: enable RX store and forward mode\n"); + pr_debug("GMAC: enable RX store and forward mode\n"); csr6 |= DMA_CONTROL_RSF; } else { - CHIP_DBG(KERN_DEBUG "GMAC: disabling RX store and forward mode" - " (threshold = %d)\n", rxmode); + pr_debug("GMAC: disable RX SF mode (threshold %d)\n", rxmode); csr6 &= ~DMA_CONTROL_RSF; csr6 &= DMA_CONTROL_TC_RX_MASK; if (rxmode <= 32) @@ -138,6 +179,11 @@ static unsigned int dwmac1000_get_hw_feature(void __iomem *ioaddr) return readl(ioaddr + DMA_HW_FEATURE); } +static void dwmac1000_rx_watchdog(void __iomem *ioaddr, u32 riwt) +{ + writel(riwt, ioaddr + DMA_RX_WATCHDOG); +} + const struct stmmac_dma_ops dwmac1000_dma_ops = { .init = dwmac1000_dma_init, .dump_regs = dwmac1000_dump_dma_regs, @@ -151,4 +197,5 @@ const struct stmmac_dma_ops dwmac1000_dma_ops = { .stop_rx = dwmac_dma_stop_rx, .dma_interrupt = dwmac_dma_interrupt, .get_hw_feature = dwmac1000_get_hw_feature, + .rx_watchdog = dwmac1000_rx_watchdog, }; diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c index 138fb8dd1e8..2ff767bcfdd 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c @@ -32,7 +32,7 @@ #include <asm/io.h> #include "dwmac100.h" -static void dwmac100_core_init(void __iomem *ioaddr) +static void dwmac100_core_init(void __iomem *ioaddr, int mtu) { u32 value = readl(ioaddr + MAC_CONTROL); @@ -43,17 +43,11 @@ static void dwmac100_core_init(void __iomem *ioaddr) #endif } -static int dwmac100_rx_coe_supported(void __iomem *ioaddr) -{ - return 0; -} - static void dwmac100_dump_mac_regs(void __iomem *ioaddr) { pr_info("\t----------------------------------------------\n" "\t DWMAC 100 CSR (base addr = 0x%p)\n" - "\t----------------------------------------------\n", - ioaddr); + "\t----------------------------------------------\n", ioaddr); pr_info("\tcontrol reg (offset 0x%x): 0x%08x\n", MAC_CONTROL, readl(ioaddr + MAC_CONTROL)); pr_info("\taddr HI (offset 0x%x): 0x%08x\n ", MAC_ADDR_HIGH, @@ -72,9 +66,15 @@ static void dwmac100_dump_mac_regs(void __iomem *ioaddr) readl(ioaddr + MAC_VLAN2)); } -static void dwmac100_irq_status(void __iomem *ioaddr) +static int dwmac100_rx_ipc_enable(void __iomem *ioaddr) { - return; + return 0; +} + +static int dwmac100_irq_status(void __iomem *ioaddr, + struct stmmac_extra_stats *x) +{ + return 0; } static void dwmac100_set_umac_addr(void __iomem *ioaddr, unsigned char *addr, @@ -89,9 +89,9 @@ static void dwmac100_get_umac_addr(void __iomem *ioaddr, unsigned char *addr, stmmac_get_mac_addr(ioaddr, addr, MAC_ADDR_HIGH, MAC_ADDR_LOW); } -static void dwmac100_set_filter(struct net_device *dev) +static void dwmac100_set_filter(struct net_device *dev, int id) { - void __iomem *ioaddr = (void __iomem *) dev->base_addr; + void __iomem *ioaddr = (void __iomem *)dev->base_addr; u32 value = readl(ioaddr + MAC_CONTROL); if (dev->flags & IFF_PROMISC) { @@ -112,7 +112,8 @@ static void dwmac100_set_filter(struct net_device *dev) struct netdev_hw_addr *ha; /* Perfect filter mode for physical address and Hash - filter for multicast */ + * filter for multicast + */ value |= MAC_CONTROL_HP; value &= ~(MAC_CONTROL_PM | MAC_CONTROL_PR | MAC_CONTROL_IF | MAC_CONTROL_HO); @@ -120,12 +121,13 @@ static void dwmac100_set_filter(struct net_device *dev) memset(mc_filter, 0, sizeof(mc_filter)); netdev_for_each_mc_addr(ha, dev) { /* The upper 6 bits of the calculated CRC are used to - * index the contens of the hash table */ - int bit_nr = - ether_crc(ETH_ALEN, ha->addr) >> 26; + * index the contens of the hash table + */ + int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26; /* The most significant bit determines the register to * use (H/L) while the other 5 bits determine the bit - * within the register. */ + * within the register. + */ mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); } writel(mc_filter[0], ioaddr + MAC_HASH_LOW); @@ -133,11 +135,6 @@ static void dwmac100_set_filter(struct net_device *dev) } writel(value, ioaddr + MAC_CONTROL); - - CHIP_DBG(KERN_INFO "%s: CTRL reg: 0x%08x Hash regs: " - "HI 0x%08x, LO 0x%08x\n", - __func__, readl(ioaddr + MAC_CONTROL), - readl(ioaddr + MAC_HASH_HIGH), readl(ioaddr + MAC_HASH_LOW)); } static void dwmac100_flow_ctrl(void __iomem *ioaddr, unsigned int duplex, @@ -150,9 +147,7 @@ static void dwmac100_flow_ctrl(void __iomem *ioaddr, unsigned int duplex, writel(flow, ioaddr + MAC_FLOW_CTRL); } -/* No PMT module supported for this Ethernet Controller. - * Tested on ST platforms only. - */ +/* No PMT module supported on ST boards with this Eth chip. */ static void dwmac100_pmt(void __iomem *ioaddr, unsigned long mode) { return; @@ -160,7 +155,7 @@ static void dwmac100_pmt(void __iomem *ioaddr, unsigned long mode) static const struct stmmac_ops dwmac100_ops = { .core_init = dwmac100_core_init, - .rx_coe = dwmac100_rx_coe_supported, + .rx_ipc = dwmac100_rx_ipc_enable, .dump_regs = dwmac100_dump_mac_regs, .host_irq_status = dwmac100_irq_status, .set_filter = dwmac100_set_filter, diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c index bc17fd08b55..7d1dce9e7ff 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c @@ -32,8 +32,8 @@ #include "dwmac100.h" #include "dwmac_dma.h" -static int dwmac100_dma_init(void __iomem *ioaddr, int pbl, u32 dma_tx, - u32 dma_rx) +static int dwmac100_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb, + int burst_len, u32 dma_tx, u32 dma_rx, int atds) { u32 value = readl(ioaddr + DMA_BUS_MODE); int limit; @@ -57,17 +57,20 @@ static int dwmac100_dma_init(void __iomem *ioaddr, int pbl, u32 dma_tx, /* Mask interrupts by writing to CSR7 */ writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA); - /* The base address of the RX/TX descriptor lists must be written into - * DMA CSR3 and CSR4, respectively. */ + /* RX/TX descriptor base addr lists must be written into + * DMA CSR3 and CSR4, respectively + */ writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR); writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR); return 0; } -/* Store and Forward capability is not used at all.. - * The transmit threshold can be programmed by - * setting the TTC bits in the DMA control register.*/ +/* Store and Forward capability is not used at all. + * + * The transmit threshold can be programmed by setting the TTC bits in the DMA + * control register. + */ static void dwmac100_dma_operation_mode(void __iomem *ioaddr, int txmode, int rxmode) { @@ -87,19 +90,18 @@ static void dwmac100_dump_dma_regs(void __iomem *ioaddr) { int i; - CHIP_DBG(KERN_DEBUG "DWMAC 100 DMA CSR\n"); + pr_debug("DWMAC 100 DMA CSR\n"); for (i = 0; i < 9; i++) pr_debug("\t CSR%d (offset 0x%x): 0x%08x\n", i, - (DMA_BUS_MODE + i * 4), - readl(ioaddr + DMA_BUS_MODE + i * 4)); - CHIP_DBG(KERN_DEBUG "\t CSR20 (offset 0x%x): 0x%08x\n", - DMA_CUR_TX_BUF_ADDR, readl(ioaddr + DMA_CUR_TX_BUF_ADDR)); - CHIP_DBG(KERN_DEBUG "\t CSR21 (offset 0x%x): 0x%08x\n", - DMA_CUR_RX_BUF_ADDR, readl(ioaddr + DMA_CUR_RX_BUF_ADDR)); + (DMA_BUS_MODE + i * 4), + readl(ioaddr + DMA_BUS_MODE + i * 4)); + + pr_debug("\tCSR20 (0x%x): 0x%08x, CSR21 (0x%x): 0x%08x\n", + DMA_CUR_TX_BUF_ADDR, readl(ioaddr + DMA_CUR_TX_BUF_ADDR), + DMA_CUR_RX_BUF_ADDR, readl(ioaddr + DMA_CUR_RX_BUF_ADDR)); } -/* DMA controller has two counters to track the number of - * the receive missed frames. */ +/* DMA controller has two counters to track the number of the missed frames. */ static void dwmac100_dma_diagnostic_fr(void *data, struct stmmac_extra_stats *x, void __iomem *ioaddr) { diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h index 437edacd602..def266da55d 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h @@ -22,6 +22,9 @@ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> *******************************************************************************/ +#ifndef __DWMAC_DMA_H__ +#define __DWMAC_DMA_H__ + /* DMA CRS Control and Status Register Mapping */ #define DMA_BUS_MODE 0x00001000 /* Bus Mode */ #define DMA_XMT_POLL_DEMAND 0x00001004 /* Transmit Poll Demand */ @@ -32,6 +35,10 @@ #define DMA_CONTROL 0x00001018 /* Ctrl (Operational Mode) */ #define DMA_INTR_ENA 0x0000101c /* Interrupt Enable */ #define DMA_MISSED_FRAME_CTR 0x00001020 /* Missed Frame Counter */ +/* Rx watchdog register */ +#define DMA_RX_WATCHDOG 0x00001024 +/* AXI Bus Mode */ +#define DMA_AXI_BUS_MODE 0x00001028 #define DMA_CUR_TX_BUF_ADDR 0x00001050 /* Current Host Tx Buffer */ #define DMA_CUR_RX_BUF_ADDR 0x00001054 /* Current Host Rx Buffer */ #define DMA_HW_FEATURE 0x00001058 /* HW Feature Register */ @@ -69,11 +76,10 @@ #define DMA_INTR_DEFAULT_MASK (DMA_INTR_NORMAL | DMA_INTR_ABNORMAL) /* DMA Status register defines */ +#define DMA_STATUS_GLPII 0x40000000 /* GMAC LPI interrupt */ #define DMA_STATUS_GPI 0x10000000 /* PMT interrupt */ #define DMA_STATUS_GMI 0x08000000 /* MMC interrupt */ #define DMA_STATUS_GLI 0x04000000 /* GMAC Line interface int */ -#define DMA_STATUS_GMI 0x08000000 -#define DMA_STATUS_GLI 0x04000000 #define DMA_STATUS_EB_MASK 0x00380000 /* Error Bits Mask */ #define DMA_STATUS_EB_TX_ABORT 0x00080000 /* Error Bits - TX Abort */ #define DMA_STATUS_EB_RX_ABORT 0x00100000 /* Error Bits - RX Abort */ @@ -96,14 +102,15 @@ #define DMA_STATUS_TU 0x00000004 /* Transmit Buffer Unavailable */ #define DMA_STATUS_TPS 0x00000002 /* Transmit Process Stopped */ #define DMA_STATUS_TI 0x00000001 /* Transmit Interrupt */ -#define DMA_CONTROL_FTF 0x00100000 /* Flush transmit FIFO */ - -extern void dwmac_enable_dma_transmission(void __iomem *ioaddr); -extern void dwmac_enable_dma_irq(void __iomem *ioaddr); -extern void dwmac_disable_dma_irq(void __iomem *ioaddr); -extern void dwmac_dma_start_tx(void __iomem *ioaddr); -extern void dwmac_dma_stop_tx(void __iomem *ioaddr); -extern void dwmac_dma_start_rx(void __iomem *ioaddr); -extern void dwmac_dma_stop_rx(void __iomem *ioaddr); -extern int dwmac_dma_interrupt(void __iomem *ioaddr, - struct stmmac_extra_stats *x); +#define DMA_CONTROL_FTF 0x00100000 /* Flush transmit FIFO */ + +void dwmac_enable_dma_transmission(void __iomem *ioaddr); +void dwmac_enable_dma_irq(void __iomem *ioaddr); +void dwmac_disable_dma_irq(void __iomem *ioaddr); +void dwmac_dma_start_tx(void __iomem *ioaddr); +void dwmac_dma_stop_tx(void __iomem *ioaddr); +void dwmac_dma_start_rx(void __iomem *ioaddr); +void dwmac_dma_stop_rx(void __iomem *ioaddr); +int dwmac_dma_interrupt(void __iomem *ioaddr, struct stmmac_extra_stats *x); + +#endif /* __DWMAC_DMA_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c index f20aa12931d..484e3cf9c41 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c @@ -24,12 +24,7 @@ #include "common.h" #include "dwmac_dma.h" -#undef DWMAC_DMA_DEBUG -#ifdef DWMAC_DMA_DEBUG -#define DWMAC_LIB_DBG(fmt, args...) printk(fmt, ## args) -#else -#define DWMAC_LIB_DBG(fmt, args...) do { } while (0) -#endif +#define GMAC_HI_REG_AE 0x80000000 /* CSR1 enables the transmit DMA to check for new descriptor */ void dwmac_enable_dma_transmission(void __iomem *ioaddr) @@ -83,24 +78,24 @@ static void show_tx_process_state(unsigned int status) switch (state) { case 0: - pr_info("- TX (Stopped): Reset or Stop command\n"); + pr_debug("- TX (Stopped): Reset or Stop command\n"); break; case 1: - pr_info("- TX (Running):Fetching the Tx desc\n"); + pr_debug("- TX (Running):Fetching the Tx desc\n"); break; case 2: - pr_info("- TX (Running): Waiting for end of tx\n"); + pr_debug("- TX (Running): Waiting for end of tx\n"); break; case 3: - pr_info("- TX (Running): Reading the data " + pr_debug("- TX (Running): Reading the data " "and queuing the data into the Tx buf\n"); break; case 6: - pr_info("- TX (Suspended): Tx Buff Underflow " + pr_debug("- TX (Suspended): Tx Buff Underflow " "or an unavailable Transmit descriptor\n"); break; case 7: - pr_info("- TX (Running): Closing Tx descriptor\n"); + pr_debug("- TX (Running): Closing Tx descriptor\n"); break; default: break; @@ -114,29 +109,29 @@ static void show_rx_process_state(unsigned int status) switch (state) { case 0: - pr_info("- RX (Stopped): Reset or Stop command\n"); + pr_debug("- RX (Stopped): Reset or Stop command\n"); break; case 1: - pr_info("- RX (Running): Fetching the Rx desc\n"); + pr_debug("- RX (Running): Fetching the Rx desc\n"); break; case 2: - pr_info("- RX (Running):Checking for end of pkt\n"); + pr_debug("- RX (Running):Checking for end of pkt\n"); break; case 3: - pr_info("- RX (Running): Waiting for Rx pkt\n"); + pr_debug("- RX (Running): Waiting for Rx pkt\n"); break; case 4: - pr_info("- RX (Suspended): Unavailable Rx buf\n"); + pr_debug("- RX (Suspended): Unavailable Rx buf\n"); break; case 5: - pr_info("- RX (Running): Closing Rx descriptor\n"); + pr_debug("- RX (Running): Closing Rx descriptor\n"); break; case 6: - pr_info("- RX(Running): Flushing the current frame" + pr_debug("- RX(Running): Flushing the current frame" " from the Rx buf\n"); break; case 7: - pr_info("- RX (Running): Queuing the Rx frame" + pr_debug("- RX (Running): Queuing the Rx frame" " from the Rx buf into memory\n"); break; default: @@ -152,70 +147,67 @@ int dwmac_dma_interrupt(void __iomem *ioaddr, /* read the status register (CSR5) */ u32 intr_status = readl(ioaddr + DMA_STATUS); - DWMAC_LIB_DBG(KERN_INFO "%s: [CSR5: 0x%08x]\n", __func__, intr_status); #ifdef DWMAC_DMA_DEBUG - /* It displays the DMA process states (CSR5 register) */ + /* Enable it to monitor DMA rx/tx status in case of critical problems */ + pr_debug("%s: [CSR5: 0x%08x]\n", __func__, intr_status); show_tx_process_state(intr_status); show_rx_process_state(intr_status); #endif /* ABNORMAL interrupts */ if (unlikely(intr_status & DMA_STATUS_AIS)) { - DWMAC_LIB_DBG(KERN_INFO "CSR5[15] DMA ABNORMAL IRQ: "); if (unlikely(intr_status & DMA_STATUS_UNF)) { - DWMAC_LIB_DBG(KERN_INFO "transmit underflow\n"); ret = tx_hard_error_bump_tc; x->tx_undeflow_irq++; } - if (unlikely(intr_status & DMA_STATUS_TJT)) { - DWMAC_LIB_DBG(KERN_INFO "transmit jabber\n"); + if (unlikely(intr_status & DMA_STATUS_TJT)) x->tx_jabber_irq++; - } - if (unlikely(intr_status & DMA_STATUS_OVF)) { - DWMAC_LIB_DBG(KERN_INFO "recv overflow\n"); + + if (unlikely(intr_status & DMA_STATUS_OVF)) x->rx_overflow_irq++; - } - if (unlikely(intr_status & DMA_STATUS_RU)) { - DWMAC_LIB_DBG(KERN_INFO "receive buffer unavailable\n"); + + if (unlikely(intr_status & DMA_STATUS_RU)) x->rx_buf_unav_irq++; - } - if (unlikely(intr_status & DMA_STATUS_RPS)) { - DWMAC_LIB_DBG(KERN_INFO "receive process stopped\n"); + if (unlikely(intr_status & DMA_STATUS_RPS)) x->rx_process_stopped_irq++; - } - if (unlikely(intr_status & DMA_STATUS_RWT)) { - DWMAC_LIB_DBG(KERN_INFO "receive watchdog\n"); + if (unlikely(intr_status & DMA_STATUS_RWT)) x->rx_watchdog_irq++; - } - if (unlikely(intr_status & DMA_STATUS_ETI)) { - DWMAC_LIB_DBG(KERN_INFO "transmit early interrupt\n"); + if (unlikely(intr_status & DMA_STATUS_ETI)) x->tx_early_irq++; - } if (unlikely(intr_status & DMA_STATUS_TPS)) { - DWMAC_LIB_DBG(KERN_INFO "transmit process stopped\n"); x->tx_process_stopped_irq++; ret = tx_hard_error; } if (unlikely(intr_status & DMA_STATUS_FBI)) { - DWMAC_LIB_DBG(KERN_INFO "fatal bus error\n"); x->fatal_bus_error_irq++; ret = tx_hard_error; } } /* TX/RX NORMAL interrupts */ - if (intr_status & DMA_STATUS_NIS) { + if (likely(intr_status & DMA_STATUS_NIS)) { x->normal_irq_n++; - if (likely((intr_status & DMA_STATUS_RI) || - (intr_status & (DMA_STATUS_TI)))) - ret = handle_tx_rx; + if (likely(intr_status & DMA_STATUS_RI)) { + u32 value = readl(ioaddr + DMA_INTR_ENA); + /* to schedule NAPI on real RIE event. */ + if (likely(value & DMA_INTR_ENA_RIE)) { + x->rx_normal_irq_n++; + ret |= handle_rx; + } + } + if (likely(intr_status & DMA_STATUS_TI)) { + x->tx_normal_irq_n++; + ret |= handle_tx; + } + if (unlikely(intr_status & DMA_STATUS_ERI)) + x->rx_early_irq++; } /* Optional hardware blocks, interrupts should be disabled */ if (unlikely(intr_status & (DMA_STATUS_GPI | DMA_STATUS_GMI | DMA_STATUS_GLI))) - pr_info("%s: unexpected status %08x\n", __func__, intr_status); + pr_warn("%s: unexpected status %08x\n", __func__, intr_status); + /* Clear the interrupt by writing a logic 1 to the CSR5[15-0] */ writel((intr_status & 0x1ffff), ioaddr + DMA_STATUS); - DWMAC_LIB_DBG(KERN_INFO "\n\n"); return ret; } @@ -233,7 +225,11 @@ void stmmac_set_mac_addr(void __iomem *ioaddr, u8 addr[6], unsigned long data; data = (addr[5] << 8) | addr[4]; - writel(data, ioaddr + high); + /* For MAC Addr registers se have to set the Address Enable (AE) + * bit that has no effect on the High Reg 0 where the bit 31 (MO) + * is RO. + */ + writel(data | GMAC_HI_REG_AE, ioaddr + high); data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0]; writel(data, ioaddr + low); } diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c index ad1b627f8ec..1e2bcf5f89e 100644 --- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c +++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c @@ -22,6 +22,7 @@ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> *******************************************************************************/ +#include <linux/stmmac.h> #include "common.h" #include "descs_com.h" @@ -32,54 +33,40 @@ static int enh_desc_get_tx_status(void *data, struct stmmac_extra_stats *x, struct net_device_stats *stats = (struct net_device_stats *)data; if (unlikely(p->des01.etx.error_summary)) { - CHIP_DBG(KERN_ERR "GMAC TX error... 0x%08x\n", p->des01.etx); - if (unlikely(p->des01.etx.jabber_timeout)) { - CHIP_DBG(KERN_ERR "\tjabber_timeout error\n"); + if (unlikely(p->des01.etx.jabber_timeout)) x->tx_jabber++; - } if (unlikely(p->des01.etx.frame_flushed)) { - CHIP_DBG(KERN_ERR "\tframe_flushed error\n"); x->tx_frame_flushed++; dwmac_dma_flush_tx_fifo(ioaddr); } if (unlikely(p->des01.etx.loss_carrier)) { - CHIP_DBG(KERN_ERR "\tloss_carrier error\n"); x->tx_losscarrier++; stats->tx_carrier_errors++; } if (unlikely(p->des01.etx.no_carrier)) { - CHIP_DBG(KERN_ERR "\tno_carrier error\n"); x->tx_carrier++; stats->tx_carrier_errors++; } - if (unlikely(p->des01.etx.late_collision)) { - CHIP_DBG(KERN_ERR "\tlate_collision error\n"); + if (unlikely(p->des01.etx.late_collision)) stats->collisions += p->des01.etx.collision_count; - } - if (unlikely(p->des01.etx.excessive_collisions)) { - CHIP_DBG(KERN_ERR "\texcessive_collisions\n"); + + if (unlikely(p->des01.etx.excessive_collisions)) stats->collisions += p->des01.etx.collision_count; - } - if (unlikely(p->des01.etx.excessive_deferral)) { - CHIP_DBG(KERN_INFO "\texcessive tx_deferral\n"); + + if (unlikely(p->des01.etx.excessive_deferral)) x->tx_deferred++; - } if (unlikely(p->des01.etx.underflow_error)) { - CHIP_DBG(KERN_ERR "\tunderflow error\n"); dwmac_dma_flush_tx_fifo(ioaddr); x->tx_underflow++; } - if (unlikely(p->des01.etx.ip_header_error)) { - CHIP_DBG(KERN_ERR "\tTX IP header csum error\n"); + if (unlikely(p->des01.etx.ip_header_error)) x->tx_ip_header_error++; - } if (unlikely(p->des01.etx.payload_error)) { - CHIP_DBG(KERN_ERR "\tAddr/Payload csum error\n"); x->tx_payload_error++; dwmac_dma_flush_tx_fifo(ioaddr); } @@ -87,15 +74,12 @@ static int enh_desc_get_tx_status(void *data, struct stmmac_extra_stats *x, ret = -1; } - if (unlikely(p->des01.etx.deferred)) { - CHIP_DBG(KERN_INFO "GMAC TX status: tx deferred\n"); + if (unlikely(p->des01.etx.deferred)) x->tx_deferred++; - } + #ifdef STMMAC_VLAN_TAG_USED - if (p->des01.etx.vlan_frame) { - CHIP_DBG(KERN_INFO "GMAC TX status: VLAN frame\n"); + if (p->des01.etx.vlan_frame) x->tx_vlan++; - } #endif return ret; @@ -122,33 +106,74 @@ static int enh_desc_coe_rdes0(int ipc_err, int type, int payload_err) * 0 1 1 | COE bypassed.. no IPv4/6 frame * 0 1 0 | Reserved. */ - if (status == 0x0) { - CHIP_DBG(KERN_INFO "RX Des0 status: IEEE 802.3 Type frame.\n"); + if (status == 0x0) ret = llc_snap; - } else if (status == 0x4) { - CHIP_DBG(KERN_INFO "RX Des0 status: IPv4/6 No CSUM errorS.\n"); + else if (status == 0x4) ret = good_frame; - } else if (status == 0x5) { - CHIP_DBG(KERN_ERR "RX Des0 status: IPv4/6 Payload Error.\n"); + else if (status == 0x5) ret = csum_none; - } else if (status == 0x6) { - CHIP_DBG(KERN_ERR "RX Des0 status: IPv4/6 Header Error.\n"); + else if (status == 0x6) ret = csum_none; - } else if (status == 0x7) { - CHIP_DBG(KERN_ERR - "RX Des0 status: IPv4/6 Header and Payload Error.\n"); + else if (status == 0x7) ret = csum_none; - } else if (status == 0x1) { - CHIP_DBG(KERN_ERR - "RX Des0 status: IPv4/6 unsupported IP PAYLOAD.\n"); + else if (status == 0x1) ret = discard_frame; - } else if (status == 0x3) { - CHIP_DBG(KERN_ERR "RX Des0 status: No IPv4, IPv6 frame.\n"); + else if (status == 0x3) ret = discard_frame; - } return ret; } +static void enh_desc_get_ext_status(void *data, struct stmmac_extra_stats *x, + struct dma_extended_desc *p) +{ + if (unlikely(p->basic.des01.erx.rx_mac_addr)) { + if (p->des4.erx.ip_hdr_err) + x->ip_hdr_err++; + if (p->des4.erx.ip_payload_err) + x->ip_payload_err++; + if (p->des4.erx.ip_csum_bypassed) + x->ip_csum_bypassed++; + if (p->des4.erx.ipv4_pkt_rcvd) + x->ipv4_pkt_rcvd++; + if (p->des4.erx.ipv6_pkt_rcvd) + x->ipv6_pkt_rcvd++; + if (p->des4.erx.msg_type == RDES_EXT_SYNC) + x->rx_msg_type_sync++; + else if (p->des4.erx.msg_type == RDES_EXT_FOLLOW_UP) + x->rx_msg_type_follow_up++; + else if (p->des4.erx.msg_type == RDES_EXT_DELAY_REQ) + x->rx_msg_type_delay_req++; + else if (p->des4.erx.msg_type == RDES_EXT_DELAY_RESP) + x->rx_msg_type_delay_resp++; + else if (p->des4.erx.msg_type == RDES_EXT_PDELAY_REQ) + x->rx_msg_type_pdelay_req++; + else if (p->des4.erx.msg_type == RDES_EXT_PDELAY_RESP) + x->rx_msg_type_pdelay_resp++; + else if (p->des4.erx.msg_type == RDES_EXT_PDELAY_FOLLOW_UP) + x->rx_msg_type_pdelay_follow_up++; + else + x->rx_msg_type_ext_no_ptp++; + if (p->des4.erx.ptp_frame_type) + x->ptp_frame_type++; + if (p->des4.erx.ptp_ver) + x->ptp_ver++; + if (p->des4.erx.timestamp_dropped) + x->timestamp_dropped++; + if (p->des4.erx.av_pkt_rcvd) + x->av_pkt_rcvd++; + if (p->des4.erx.av_tagged_pkt_rcvd) + x->av_tagged_pkt_rcvd++; + if (p->des4.erx.vlan_tag_priority_val) + x->vlan_tag_priority_val++; + if (p->des4.erx.l3_filter_match) + x->l3_filter_match++; + if (p->des4.erx.l4_filter_match) + x->l4_filter_match++; + if (p->des4.erx.l3_l4_filter_no_match) + x->l3_l4_filter_no_match++; + } +} + static int enh_desc_get_rx_status(void *data, struct stmmac_extra_stats *x, struct dma_desc *p) { @@ -156,36 +181,26 @@ static int enh_desc_get_rx_status(void *data, struct stmmac_extra_stats *x, struct net_device_stats *stats = (struct net_device_stats *)data; if (unlikely(p->des01.erx.error_summary)) { - CHIP_DBG(KERN_ERR "GMAC RX Error Summary 0x%08x\n", - p->des01.erx); if (unlikely(p->des01.erx.descriptor_error)) { - CHIP_DBG(KERN_ERR "\tdescriptor error\n"); x->rx_desc++; stats->rx_length_errors++; } - if (unlikely(p->des01.erx.overflow_error)) { - CHIP_DBG(KERN_ERR "\toverflow error\n"); + if (unlikely(p->des01.erx.overflow_error)) x->rx_gmac_overflow++; - } if (unlikely(p->des01.erx.ipc_csum_error)) - CHIP_DBG(KERN_ERR "\tIPC Csum Error/Giant frame\n"); + pr_err("\tIPC Csum Error/Giant frame\n"); if (unlikely(p->des01.erx.late_collision)) { - CHIP_DBG(KERN_ERR "\tlate_collision error\n"); - stats->collisions++; stats->collisions++; } - if (unlikely(p->des01.erx.receive_watchdog)) { - CHIP_DBG(KERN_ERR "\treceive_watchdog error\n"); + if (unlikely(p->des01.erx.receive_watchdog)) x->rx_watchdog++; - } - if (unlikely(p->des01.erx.error_gmii)) { - CHIP_DBG(KERN_ERR "\tReceive Error\n"); + + if (unlikely(p->des01.erx.error_gmii)) x->rx_mii++; - } + if (unlikely(p->des01.erx.crc_error)) { - CHIP_DBG(KERN_ERR "\tCRC error\n"); x->rx_crc++; stats->rx_crc_errors++; } @@ -197,61 +212,53 @@ static int enh_desc_get_rx_status(void *data, struct stmmac_extra_stats *x, * At any rate, we need to understand if the CSUM hw computation is ok * and report this info to the upper layers. */ ret = enh_desc_coe_rdes0(p->des01.erx.ipc_csum_error, - p->des01.erx.frame_type, p->des01.erx.payload_csum_error); + p->des01.erx.frame_type, p->des01.erx.rx_mac_addr); - if (unlikely(p->des01.erx.dribbling)) { - CHIP_DBG(KERN_ERR "GMAC RX: dribbling error\n"); + if (unlikely(p->des01.erx.dribbling)) x->dribbling_bit++; - } + if (unlikely(p->des01.erx.sa_filter_fail)) { - CHIP_DBG(KERN_ERR "GMAC RX : Source Address filter fail\n"); x->sa_rx_filter_fail++; ret = discard_frame; } if (unlikely(p->des01.erx.da_filter_fail)) { - CHIP_DBG(KERN_ERR "GMAC RX : Dest Address filter fail\n"); x->da_rx_filter_fail++; ret = discard_frame; } if (unlikely(p->des01.erx.length_error)) { - CHIP_DBG(KERN_ERR "GMAC RX: length_error error\n"); x->rx_length++; ret = discard_frame; } #ifdef STMMAC_VLAN_TAG_USED - if (p->des01.erx.vlan_tag) { - CHIP_DBG(KERN_INFO "GMAC RX: VLAN frame tagged\n"); + if (p->des01.erx.vlan_tag) x->rx_vlan++; - } #endif + return ret; } -static void enh_desc_init_rx_desc(struct dma_desc *p, unsigned int ring_size, - int disable_rx_ic) +static void enh_desc_init_rx_desc(struct dma_desc *p, int disable_rx_ic, + int mode, int end) { - int i; - for (i = 0; i < ring_size; i++) { - p->des01.erx.own = 1; - p->des01.erx.buffer1_size = BUF_SIZE_8KiB - 1; + p->des01.erx.own = 1; + p->des01.erx.buffer1_size = BUF_SIZE_8KiB - 1; - ehn_desc_rx_set_on_ring_chain(p, (i == ring_size - 1)); + if (mode == STMMAC_CHAIN_MODE) + ehn_desc_rx_set_on_chain(p, end); + else + ehn_desc_rx_set_on_ring(p, end); - if (disable_rx_ic) - p->des01.erx.disable_ic = 1; - p++; - } + if (disable_rx_ic) + p->des01.erx.disable_ic = 1; } -static void enh_desc_init_tx_desc(struct dma_desc *p, unsigned int ring_size) +static void enh_desc_init_tx_desc(struct dma_desc *p, int mode, int end) { - int i; - - for (i = 0; i < ring_size; i++) { - p->des01.etx.own = 0; - ehn_desc_tx_set_on_ring_chain(p, (i == ring_size - 1)); - p++; - } + p->des01.etx.own = 0; + if (mode == STMMAC_CHAIN_MODE) + ehn_desc_tx_set_on_chain(p, end); + else + ehn_desc_tx_set_on_ring(p, end); } static int enh_desc_get_tx_owner(struct dma_desc *p) @@ -279,20 +286,26 @@ static int enh_desc_get_tx_ls(struct dma_desc *p) return p->des01.etx.last_segment; } -static void enh_desc_release_tx_desc(struct dma_desc *p) +static void enh_desc_release_tx_desc(struct dma_desc *p, int mode) { int ter = p->des01.etx.end_ring; memset(p, 0, offsetof(struct dma_desc, des2)); - enh_desc_end_tx_desc(p, ter); + if (mode == STMMAC_CHAIN_MODE) + enh_desc_end_tx_desc_on_chain(p, ter); + else + enh_desc_end_tx_desc_on_ring(p, ter); } static void enh_desc_prepare_tx_desc(struct dma_desc *p, int is_fs, int len, - int csum_flag) + int csum_flag, int mode) { p->des01.etx.first_segment = is_fs; - enh_set_tx_desc_len(p, len); + if (mode == STMMAC_CHAIN_MODE) + enh_set_tx_desc_len_on_chain(p, len); + else + enh_set_tx_desc_len_on_ring(p, len); if (likely(csum_flag)) p->des01.etx.checksum_insertion = cic_full; @@ -309,9 +322,60 @@ static void enh_desc_close_tx_desc(struct dma_desc *p) p->des01.etx.interrupt = 1; } -static int enh_desc_get_rx_frame_len(struct dma_desc *p) +static int enh_desc_get_rx_frame_len(struct dma_desc *p, int rx_coe_type) +{ + /* The type-1 checksum offload engines append the checksum at + * the end of frame and the two bytes of checksum are added in + * the length. + * Adjust for that in the framelen for type-1 checksum offload + * engines. */ + if (rx_coe_type == STMMAC_RX_COE_TYPE1) + return p->des01.erx.frame_length - 2; + else + return p->des01.erx.frame_length; +} + +static void enh_desc_enable_tx_timestamp(struct dma_desc *p) +{ + p->des01.etx.time_stamp_enable = 1; +} + +static int enh_desc_get_tx_timestamp_status(struct dma_desc *p) +{ + return p->des01.etx.time_stamp_status; +} + +static u64 enh_desc_get_timestamp(void *desc, u32 ats) { - return p->des01.erx.frame_length; + u64 ns; + + if (ats) { + struct dma_extended_desc *p = (struct dma_extended_desc *)desc; + ns = p->des6; + /* convert high/sec time stamp value to nanosecond */ + ns += p->des7 * 1000000000ULL; + } else { + struct dma_desc *p = (struct dma_desc *)desc; + ns = p->des2; + ns += p->des3 * 1000000000ULL; + } + + return ns; +} + +static int enh_desc_get_rx_timestamp_status(void *desc, u32 ats) +{ + if (ats) { + struct dma_extended_desc *p = (struct dma_extended_desc *)desc; + return p->basic.des01.erx.ipc_csum_error; + } else { + struct dma_desc *p = (struct dma_desc *)desc; + if ((p->des2 == 0xffffffff) && (p->des3 == 0xffffffff)) + /* timestamp is corrupted, hence don't store it */ + return 0; + else + return 1; + } } const struct stmmac_desc_ops enh_desc_ops = { @@ -330,4 +394,9 @@ const struct stmmac_desc_ops enh_desc_ops = { .set_tx_owner = enh_desc_set_tx_owner, .set_rx_owner = enh_desc_set_rx_owner, .get_rx_frame_len = enh_desc_get_rx_frame_len, + .rx_extended_status = enh_desc_get_ext_status, + .enable_tx_timestamp = enh_desc_enable_tx_timestamp, + .get_tx_timestamp_status = enh_desc_get_tx_timestamp_status, + .get_timestamp = enh_desc_get_timestamp, + .get_rx_timestamp_status = enh_desc_get_rx_timestamp_status, }; diff --git a/drivers/net/ethernet/stmicro/stmmac/mmc.h b/drivers/net/ethernet/stmicro/stmmac/mmc.h index a38352024cb..8607488cbcf 100644 --- a/drivers/net/ethernet/stmicro/stmmac/mmc.h +++ b/drivers/net/ethernet/stmicro/stmmac/mmc.h @@ -22,11 +22,13 @@ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> *******************************************************************************/ +#ifndef __MMC_H__ +#define __MMC_H__ + /* MMC control register */ /* When set, all counter are reset */ #define MMC_CNTRL_COUNTER_RESET 0x1 -/* When set, do not roll over zero - * after reaching the max value*/ +/* When set, do not roll over zero after reaching the max value*/ #define MMC_CNTRL_COUNTER_STOP_ROLLOVER 0x2 #define MMC_CNTRL_RESET_ON_READ 0x4 /* Reset after reading */ #define MMC_CNTRL_COUNTER_FREEZER 0x8 /* Freeze counter values to the @@ -126,6 +128,8 @@ struct stmmac_counters { unsigned int mmc_rx_icmp_err_octets; }; -extern void dwmac_mmc_ctrl(void __iomem *ioaddr, unsigned int mode); -extern void dwmac_mmc_intr_all_mask(void __iomem *ioaddr); -extern void dwmac_mmc_read(void __iomem *ioaddr, struct stmmac_counters *mmc); +void dwmac_mmc_ctrl(void __iomem *ioaddr, unsigned int mode); +void dwmac_mmc_intr_all_mask(void __iomem *ioaddr); +void dwmac_mmc_read(void __iomem *ioaddr, struct stmmac_counters *mmc); + +#endif /* __MMC_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c index c07cfe989f6..50617c5a0bd 100644 --- a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c @@ -33,7 +33,7 @@ #define MMC_TX_INTR 0x00000108 /* MMC TX Interrupt */ #define MMC_RX_INTR_MASK 0x0000010c /* MMC Interrupt Mask */ #define MMC_TX_INTR_MASK 0x00000110 /* MMC Interrupt Mask */ -#define MMC_DEFAUL_MASK 0xffffffff +#define MMC_DEFAULT_MASK 0xffffffff /* MMC TX counter registers */ @@ -147,8 +147,9 @@ void dwmac_mmc_ctrl(void __iomem *ioaddr, unsigned int mode) /* To mask all all interrupts.*/ void dwmac_mmc_intr_all_mask(void __iomem *ioaddr) { - writel(MMC_DEFAUL_MASK, ioaddr + MMC_RX_INTR_MASK); - writel(MMC_DEFAUL_MASK, ioaddr + MMC_TX_INTR_MASK); + writel(MMC_DEFAULT_MASK, ioaddr + MMC_RX_INTR_MASK); + writel(MMC_DEFAULT_MASK, ioaddr + MMC_TX_INTR_MASK); + writel(MMC_DEFAULT_MASK, ioaddr + MMC_RX_IPC_INTR_MASK); } /* This reads the MAC core counters (if actaully supported). diff --git a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c index 25953bb45a7..35ad4f427ae 100644 --- a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c +++ b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c @@ -22,6 +22,7 @@ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> *******************************************************************************/ +#include <linux/stmmac.h> #include "common.h" #include "descs_com.h" @@ -51,10 +52,8 @@ static int ndesc_get_tx_status(void *data, struct stmmac_extra_stats *x, ret = -1; } - if (p->des01.etx.vlan_frame) { - CHIP_DBG(KERN_INFO "GMAC TX status: VLAN frame\n"); + if (p->des01.etx.vlan_frame) x->tx_vlan++; - } if (unlikely(p->des01.tx.deferred)) x->tx_deferred++; @@ -78,8 +77,8 @@ static int ndesc_get_rx_status(void *data, struct stmmac_extra_stats *x, struct net_device_stats *stats = (struct net_device_stats *)data; if (unlikely(p->des01.rx.last_descriptor == 0)) { - pr_warning("ndesc Error: Oversized Ethernet " - "frame spanned multiple buffers\n"); + pr_warn("%s: Oversized frame spanned multiple buffers\n", + __func__); stats->rx_length_errors++; return discard_frame; } @@ -121,30 +120,28 @@ static int ndesc_get_rx_status(void *data, struct stmmac_extra_stats *x, return ret; } -static void ndesc_init_rx_desc(struct dma_desc *p, unsigned int ring_size, - int disable_rx_ic) +static void ndesc_init_rx_desc(struct dma_desc *p, int disable_rx_ic, int mode, + int end) { - int i; - for (i = 0; i < ring_size; i++) { - p->des01.rx.own = 1; - p->des01.rx.buffer1_size = BUF_SIZE_2KiB - 1; + p->des01.rx.own = 1; + p->des01.rx.buffer1_size = BUF_SIZE_2KiB - 1; - ndesc_rx_set_on_ring_chain(p, (i == ring_size - 1)); + if (mode == STMMAC_CHAIN_MODE) + ndesc_rx_set_on_chain(p, end); + else + ndesc_rx_set_on_ring(p, end); - if (disable_rx_ic) - p->des01.rx.disable_ic = 1; - p++; - } + if (disable_rx_ic) + p->des01.rx.disable_ic = 1; } -static void ndesc_init_tx_desc(struct dma_desc *p, unsigned int ring_size) +static void ndesc_init_tx_desc(struct dma_desc *p, int mode, int end) { - int i; - for (i = 0; i < ring_size; i++) { - p->des01.tx.own = 0; - ndesc_tx_set_on_ring_chain(p, (i == (ring_size - 1))); - p++; - } + p->des01.tx.own = 0; + if (mode == STMMAC_CHAIN_MODE) + ndesc_tx_set_on_chain(p, end); + else + ndesc_tx_set_on_ring(p, end); } static int ndesc_get_tx_owner(struct dma_desc *p) @@ -172,19 +169,25 @@ static int ndesc_get_tx_ls(struct dma_desc *p) return p->des01.tx.last_segment; } -static void ndesc_release_tx_desc(struct dma_desc *p) +static void ndesc_release_tx_desc(struct dma_desc *p, int mode) { int ter = p->des01.tx.end_ring; memset(p, 0, offsetof(struct dma_desc, des2)); - ndesc_end_tx_desc(p, ter); + if (mode == STMMAC_CHAIN_MODE) + ndesc_end_tx_desc_on_chain(p, ter); + else + ndesc_end_tx_desc_on_ring(p, ter); } static void ndesc_prepare_tx_desc(struct dma_desc *p, int is_fs, int len, - int csum_flag) + int csum_flag, int mode) { p->des01.tx.first_segment = is_fs; - norm_set_tx_desc_len(p, len); + if (mode == STMMAC_CHAIN_MODE) + norm_set_tx_desc_len_on_chain(p, len); + else + norm_set_tx_desc_len_on_ring(p, len); if (likely(csum_flag)) p->des01.tx.checksum_insertion = cic_full; @@ -201,9 +204,50 @@ static void ndesc_close_tx_desc(struct dma_desc *p) p->des01.tx.interrupt = 1; } -static int ndesc_get_rx_frame_len(struct dma_desc *p) +static int ndesc_get_rx_frame_len(struct dma_desc *p, int rx_coe_type) +{ + /* The type-1 checksum offload engines append the checksum at + * the end of frame and the two bytes of checksum are added in + * the length. + * Adjust for that in the framelen for type-1 checksum offload + * engines. */ + if (rx_coe_type == STMMAC_RX_COE_TYPE1) + return p->des01.rx.frame_length - 2; + else + return p->des01.rx.frame_length; +} + +static void ndesc_enable_tx_timestamp(struct dma_desc *p) +{ + p->des01.tx.time_stamp_enable = 1; +} + +static int ndesc_get_tx_timestamp_status(struct dma_desc *p) { - return p->des01.rx.frame_length; + return p->des01.tx.time_stamp_status; +} + +static u64 ndesc_get_timestamp(void *desc, u32 ats) +{ + struct dma_desc *p = (struct dma_desc *)desc; + u64 ns; + + ns = p->des2; + /* convert high/sec time stamp value to nanosecond */ + ns += p->des3 * 1000000000ULL; + + return ns; +} + +static int ndesc_get_rx_timestamp_status(void *desc, u32 ats) +{ + struct dma_desc *p = (struct dma_desc *)desc; + + if ((p->des2 == 0xffffffff) && (p->des3 == 0xffffffff)) + /* timestamp is corrupted, hence don't store it */ + return 0; + else + return 1; } const struct stmmac_desc_ops ndesc_ops = { @@ -222,4 +266,8 @@ const struct stmmac_desc_ops ndesc_ops = { .set_tx_owner = ndesc_set_tx_owner, .set_rx_owner = ndesc_set_rx_owner, .get_rx_frame_len = ndesc_get_rx_frame_len, + .enable_tx_timestamp = ndesc_enable_tx_timestamp, + .get_tx_timestamp_status = ndesc_get_tx_timestamp_status, + .get_timestamp = ndesc_get_timestamp, + .get_rx_timestamp_status = ndesc_get_rx_timestamp_status, }; diff --git a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c index fb8377da168..650a4be6bce 100644 --- a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c +++ b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c @@ -30,13 +30,18 @@ static unsigned int stmmac_jumbo_frm(void *p, struct sk_buff *skb, int csum) { - struct stmmac_priv *priv = (struct stmmac_priv *) p; + struct stmmac_priv *priv = (struct stmmac_priv *)p; unsigned int txsize = priv->dma_tx_size; unsigned int entry = priv->cur_tx % txsize; - struct dma_desc *desc = priv->dma_tx + entry; + struct dma_desc *desc; unsigned int nopaged_len = skb_headlen(skb); unsigned int bmax, len; + if (priv->extend_desc) + desc = (struct dma_desc *)(priv->dma_etx + entry); + else + desc = priv->dma_tx + entry; + if (priv->plat->enh_desc) bmax = BUF_SIZE_8KiB; else @@ -48,24 +53,34 @@ static unsigned int stmmac_jumbo_frm(void *p, struct sk_buff *skb, int csum) desc->des2 = dma_map_single(priv->device, skb->data, bmax, DMA_TO_DEVICE); + priv->tx_skbuff_dma[entry] = desc->des2; desc->des3 = desc->des2 + BUF_SIZE_4KiB; - priv->hw->desc->prepare_tx_desc(desc, 1, bmax, - csum); - + priv->hw->desc->prepare_tx_desc(desc, 1, bmax, csum, + STMMAC_RING_MODE); + wmb(); + priv->tx_skbuff[entry] = NULL; entry = (++priv->cur_tx) % txsize; - desc = priv->dma_tx + entry; + + if (priv->extend_desc) + desc = (struct dma_desc *)(priv->dma_etx + entry); + else + desc = priv->dma_tx + entry; desc->des2 = dma_map_single(priv->device, skb->data + bmax, len, DMA_TO_DEVICE); + priv->tx_skbuff_dma[entry] = desc->des2; desc->des3 = desc->des2 + BUF_SIZE_4KiB; - priv->hw->desc->prepare_tx_desc(desc, 0, len, csum); + priv->hw->desc->prepare_tx_desc(desc, 0, len, csum, + STMMAC_RING_MODE); + wmb(); priv->hw->desc->set_tx_owner(desc); - priv->tx_skbuff[entry] = NULL; } else { desc->des2 = dma_map_single(priv->device, skb->data, nopaged_len, DMA_TO_DEVICE); + priv->tx_skbuff_dma[entry] = desc->des2; desc->des3 = desc->des2 + BUF_SIZE_4KiB; - priv->hw->desc->prepare_tx_desc(desc, 1, nopaged_len, csum); + priv->hw->desc->prepare_tx_desc(desc, 1, nopaged_len, csum, + STMMAC_RING_MODE); } return entry; @@ -81,27 +96,22 @@ static unsigned int stmmac_is_jumbo_frm(int len, int enh_desc) return ret; } -static void stmmac_refill_desc3(int bfsize, struct dma_desc *p) +static void stmmac_refill_desc3(void *priv_ptr, struct dma_desc *p) { - /* Fill DES3 in case of RING mode */ - if (bfsize >= BUF_SIZE_8KiB) - p->des3 = p->des2 + BUF_SIZE_8KiB; -} + struct stmmac_priv *priv = (struct stmmac_priv *)priv_ptr; -/* In ring mode we need to fill the desc3 because it is used - * as buffer */ -static void stmmac_init_desc3(int des3_as_data_buf, struct dma_desc *p) -{ - if (unlikely(des3_as_data_buf)) + /* Fill DES3 in case of RING mode */ + if (priv->dma_buf_sz >= BUF_SIZE_8KiB) p->des3 = p->des2 + BUF_SIZE_8KiB; } -static void stmmac_init_dma_chain(struct dma_desc *des, dma_addr_t phy_addr, - unsigned int size) +/* In ring mode we need to fill the desc3 because it is used as buffer */ +static void stmmac_init_desc3(struct dma_desc *p) { + p->des3 = p->des2 + BUF_SIZE_8KiB; } -static void stmmac_clean_desc3(struct dma_desc *p) +static void stmmac_clean_desc3(void *priv_ptr, struct dma_desc *p) { if (unlikely(p->des3)) p->des3 = 0; @@ -115,12 +125,11 @@ static int stmmac_set_16kib_bfsize(int mtu) return ret; } -const struct stmmac_ring_mode_ops ring_mode_ops = { +const struct stmmac_mode_ops ring_mode_ops = { .is_jumbo_frm = stmmac_is_jumbo_frm, .jumbo_frm = stmmac_jumbo_frm, .refill_desc3 = stmmac_refill_desc3, .init_desc3 = stmmac_init_desc3, - .init_dma_chain = stmmac_init_dma_chain, .clean_desc3 = stmmac_clean_desc3, .set_16kib_bfsize = stmmac_set_16kib_bfsize, }; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h index b4b095fdcf2..ca01035634a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h @@ -20,47 +20,60 @@ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> *******************************************************************************/ +#ifndef __STMMAC_H__ +#define __STMMAC_H__ + #define STMMAC_RESOURCE_NAME "stmmaceth" -#define DRV_MODULE_VERSION "Feb_2012" +#define DRV_MODULE_VERSION "March_2013" + +#include <linux/clk.h> #include <linux/stmmac.h> #include <linux/phy.h> +#include <linux/pci.h> #include "common.h" -#ifdef CONFIG_STMMAC_TIMER -#include "stmmac_timer.h" -#endif +#include <linux/ptp_clock_kernel.h> +#include <linux/reset.h> struct stmmac_priv { /* Frequently used values are kept adjacent for cache effect */ - struct dma_desc *dma_tx ____cacheline_aligned; - dma_addr_t dma_tx_phy; + struct dma_extended_desc *dma_etx ____cacheline_aligned_in_smp; + struct dma_desc *dma_tx; struct sk_buff **tx_skbuff; unsigned int cur_tx; unsigned int dirty_tx; unsigned int dma_tx_size; + u32 tx_count_frames; + u32 tx_coal_frames; + u32 tx_coal_timer; + dma_addr_t *tx_skbuff_dma; + dma_addr_t dma_tx_phy; int tx_coalesce; + int hwts_tx_en; + spinlock_t tx_lock; + bool tx_path_in_lpi_mode; + struct timer_list txtimer; - struct dma_desc *dma_rx ; + struct dma_desc *dma_rx ____cacheline_aligned_in_smp; + struct dma_extended_desc *dma_erx; + struct sk_buff **rx_skbuff; unsigned int cur_rx; unsigned int dirty_rx; - struct sk_buff **rx_skbuff; + unsigned int dma_rx_size; + unsigned int dma_buf_sz; + u32 rx_riwt; + int hwts_rx_en; dma_addr_t *rx_skbuff_dma; - struct sk_buff_head rx_recycle; + dma_addr_t dma_rx_phy; + + struct napi_struct napi ____cacheline_aligned_in_smp; + void __iomem *ioaddr; struct net_device *dev; - dma_addr_t dma_rx_phy; - unsigned int dma_rx_size; - unsigned int dma_buf_sz; struct device *device; struct mac_device_info *hw; - void __iomem *ioaddr; - - struct stmmac_extra_stats xstats; - struct napi_struct napi; - - int rx_coe; - int no_csum_insertion; + spinlock_t lock; - struct phy_device *phydev; + struct phy_device *phydev ____cacheline_aligned_in_smp; int oldlink; int speed; int oldduplex; @@ -69,33 +82,120 @@ struct stmmac_priv { struct mii_bus *mii; int mii_irq[PHY_MAX_ADDR]; - u32 msg_enable; - spinlock_t lock; - spinlock_t tx_lock; - int wolopts; - int wol_irq; -#ifdef CONFIG_STMMAC_TIMER - struct stmmac_timer *tm; -#endif + struct stmmac_extra_stats xstats ____cacheline_aligned_in_smp; struct plat_stmmacenet_data *plat; - struct stmmac_counters mmc; struct dma_features dma_cap; + struct stmmac_counters mmc; int hw_cap_support; + int synopsys_id; + u32 msg_enable; + int wolopts; + int wol_irq; + struct clk *stmmac_clk; + struct reset_control *stmmac_rst; + int clk_csr; + struct timer_list eee_ctrl_timer; + int lpi_irq; + int eee_enabled; + int eee_active; + int tx_lpi_timer; + int pcs; + unsigned int mode; + int extend_desc; + struct ptp_clock *ptp_clock; + struct ptp_clock_info ptp_clock_ops; + unsigned int default_addend; + u32 adv_ts; + int use_riwt; + int irq_wake; + spinlock_t ptp_lock; }; -extern int phyaddr; - -extern int stmmac_mdio_unregister(struct net_device *ndev); -extern int stmmac_mdio_register(struct net_device *ndev); -extern void stmmac_set_ethtool_ops(struct net_device *netdev); +int stmmac_mdio_unregister(struct net_device *ndev); +int stmmac_mdio_register(struct net_device *ndev); +int stmmac_mdio_reset(struct mii_bus *mii); +void stmmac_set_ethtool_ops(struct net_device *netdev); extern const struct stmmac_desc_ops enh_desc_ops; extern const struct stmmac_desc_ops ndesc_ops; - -int stmmac_freeze(struct net_device *ndev); -int stmmac_restore(struct net_device *ndev); +extern const struct stmmac_hwtimestamp stmmac_ptp; +int stmmac_ptp_register(struct stmmac_priv *priv); +void stmmac_ptp_unregister(struct stmmac_priv *priv); int stmmac_resume(struct net_device *ndev); int stmmac_suspend(struct net_device *ndev); int stmmac_dvr_remove(struct net_device *ndev); struct stmmac_priv *stmmac_dvr_probe(struct device *device, struct plat_stmmacenet_data *plat_dat, void __iomem *addr); +void stmmac_disable_eee_mode(struct stmmac_priv *priv); +bool stmmac_eee_init(struct stmmac_priv *priv); + +#ifdef CONFIG_STMMAC_PLATFORM +#ifdef CONFIG_DWMAC_SUNXI +extern const struct stmmac_of_data sun7i_gmac_data; +#endif +#ifdef CONFIG_DWMAC_STI +extern const struct stmmac_of_data sti_gmac_data; +#endif +#ifdef CONFIG_DWMAC_SOCFPGA +extern const struct stmmac_of_data socfpga_gmac_data; +#endif +extern struct platform_driver stmmac_pltfr_driver; +static inline int stmmac_register_platform(void) +{ + int err; + + err = platform_driver_register(&stmmac_pltfr_driver); + if (err) + pr_err("stmmac: failed to register the platform driver\n"); + + return err; +} + +static inline void stmmac_unregister_platform(void) +{ + platform_driver_unregister(&stmmac_pltfr_driver); +} +#else +static inline int stmmac_register_platform(void) +{ + pr_debug("stmmac: do not register the platf driver\n"); + + return 0; +} + +static inline void stmmac_unregister_platform(void) +{ +} +#endif /* CONFIG_STMMAC_PLATFORM */ + +#ifdef CONFIG_STMMAC_PCI +extern struct pci_driver stmmac_pci_driver; +static inline int stmmac_register_pci(void) +{ + int err; + + err = pci_register_driver(&stmmac_pci_driver); + if (err) + pr_err("stmmac: failed to register the PCI driver\n"); + + return err; +} + +static inline void stmmac_unregister_pci(void) +{ + pci_unregister_driver(&stmmac_pci_driver); +} +#else +static inline int stmmac_register_pci(void) +{ + pr_debug("stmmac: do not register the PCI driver\n"); + + return 0; +} + +static inline void stmmac_unregister_pci(void) +{ +} +#endif /* CONFIG_STMMAC_PCI */ + +#endif /* __STMMAC_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c index f98e1511660..c62e67f3c2f 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c @@ -27,6 +27,7 @@ #include <linux/interrupt.h> #include <linux/mii.h> #include <linux/phy.h> +#include <linux/net_tstamp.h> #include <asm/io.h> #include "stmmac.h" @@ -76,7 +77,7 @@ static const struct stmmac_stats stmmac_gstrings_stats[] = { STMMAC_STAT(rx_missed_cntr), STMMAC_STAT(rx_overflow_cntr), STMMAC_STAT(rx_vlan), - /* Tx/Rx IRQ errors */ + /* Tx/Rx IRQ error info */ STMMAC_STAT(tx_undeflow_irq), STMMAC_STAT(tx_process_stopped_irq), STMMAC_STAT(tx_jabber_irq), @@ -86,13 +87,55 @@ static const struct stmmac_stats stmmac_gstrings_stats[] = { STMMAC_STAT(rx_watchdog_irq), STMMAC_STAT(tx_early_irq), STMMAC_STAT(fatal_bus_error_irq), - /* Extra info */ + /* Tx/Rx IRQ Events */ + STMMAC_STAT(rx_early_irq), STMMAC_STAT(threshold), STMMAC_STAT(tx_pkt_n), STMMAC_STAT(rx_pkt_n), - STMMAC_STAT(poll_n), - STMMAC_STAT(sched_timer_n), STMMAC_STAT(normal_irq_n), + STMMAC_STAT(rx_normal_irq_n), + STMMAC_STAT(napi_poll), + STMMAC_STAT(tx_normal_irq_n), + STMMAC_STAT(tx_clean), + STMMAC_STAT(tx_reset_ic_bit), + STMMAC_STAT(irq_receive_pmt_irq_n), + /* MMC info */ + STMMAC_STAT(mmc_tx_irq_n), + STMMAC_STAT(mmc_rx_irq_n), + STMMAC_STAT(mmc_rx_csum_offload_irq_n), + /* EEE */ + STMMAC_STAT(irq_tx_path_in_lpi_mode_n), + STMMAC_STAT(irq_tx_path_exit_lpi_mode_n), + STMMAC_STAT(irq_rx_path_in_lpi_mode_n), + STMMAC_STAT(irq_rx_path_exit_lpi_mode_n), + STMMAC_STAT(phy_eee_wakeup_error_n), + /* Extended RDES status */ + STMMAC_STAT(ip_hdr_err), + STMMAC_STAT(ip_payload_err), + STMMAC_STAT(ip_csum_bypassed), + STMMAC_STAT(ipv4_pkt_rcvd), + STMMAC_STAT(ipv6_pkt_rcvd), + STMMAC_STAT(rx_msg_type_ext_no_ptp), + STMMAC_STAT(rx_msg_type_sync), + STMMAC_STAT(rx_msg_type_follow_up), + STMMAC_STAT(rx_msg_type_delay_req), + STMMAC_STAT(rx_msg_type_delay_resp), + STMMAC_STAT(rx_msg_type_pdelay_req), + STMMAC_STAT(rx_msg_type_pdelay_resp), + STMMAC_STAT(rx_msg_type_pdelay_follow_up), + STMMAC_STAT(ptp_frame_type), + STMMAC_STAT(ptp_ver), + STMMAC_STAT(timestamp_dropped), + STMMAC_STAT(av_pkt_rcvd), + STMMAC_STAT(av_tagged_pkt_rcvd), + STMMAC_STAT(vlan_tag_priority_val), + STMMAC_STAT(l3_filter_match), + STMMAC_STAT(l4_filter_match), + STMMAC_STAT(l3_l4_filter_no_match), + /* PCS */ + STMMAC_STAT(irq_pcs_ane_n), + STMMAC_STAT(irq_pcs_link_n), + STMMAC_STAT(irq_rgmii_n), }; #define STMMAC_STATS_LEN ARRAY_SIZE(stmmac_gstrings_stats) @@ -195,8 +238,7 @@ static void stmmac_ethtool_getdrvinfo(struct net_device *dev, strlcpy(info->driver, MAC100_ETHTOOL_NAME, sizeof(info->driver)); - strcpy(info->version, DRV_MODULE_VERSION); - info->fw_version[0] = '\0'; + strlcpy(info->version, DRV_MODULE_VERSION, sizeof(info->version)); } static int stmmac_ethtool_getsettings(struct net_device *dev, @@ -205,6 +247,70 @@ static int stmmac_ethtool_getsettings(struct net_device *dev, struct stmmac_priv *priv = netdev_priv(dev); struct phy_device *phy = priv->phydev; int rc; + + if ((priv->pcs & STMMAC_PCS_RGMII) || (priv->pcs & STMMAC_PCS_SGMII)) { + struct rgmii_adv adv; + + if (!priv->xstats.pcs_link) { + ethtool_cmd_speed_set(cmd, SPEED_UNKNOWN); + cmd->duplex = DUPLEX_UNKNOWN; + return 0; + } + cmd->duplex = priv->xstats.pcs_duplex; + + ethtool_cmd_speed_set(cmd, priv->xstats.pcs_speed); + + /* Get and convert ADV/LP_ADV from the HW AN registers */ + if (priv->hw->mac->get_adv) + priv->hw->mac->get_adv(priv->ioaddr, &adv); + else + return -EOPNOTSUPP; /* should never happen indeed */ + + /* Encoding of PSE bits is defined in 802.3z, 37.2.1.4 */ + + if (adv.pause & STMMAC_PCS_PAUSE) + cmd->advertising |= ADVERTISED_Pause; + if (adv.pause & STMMAC_PCS_ASYM_PAUSE) + cmd->advertising |= ADVERTISED_Asym_Pause; + if (adv.lp_pause & STMMAC_PCS_PAUSE) + cmd->lp_advertising |= ADVERTISED_Pause; + if (adv.lp_pause & STMMAC_PCS_ASYM_PAUSE) + cmd->lp_advertising |= ADVERTISED_Asym_Pause; + + /* Reg49[3] always set because ANE is always supported */ + cmd->autoneg = ADVERTISED_Autoneg; + cmd->supported |= SUPPORTED_Autoneg; + cmd->advertising |= ADVERTISED_Autoneg; + cmd->lp_advertising |= ADVERTISED_Autoneg; + + if (adv.duplex) { + cmd->supported |= (SUPPORTED_1000baseT_Full | + SUPPORTED_100baseT_Full | + SUPPORTED_10baseT_Full); + cmd->advertising |= (ADVERTISED_1000baseT_Full | + ADVERTISED_100baseT_Full | + ADVERTISED_10baseT_Full); + } else { + cmd->supported |= (SUPPORTED_1000baseT_Half | + SUPPORTED_100baseT_Half | + SUPPORTED_10baseT_Half); + cmd->advertising |= (ADVERTISED_1000baseT_Half | + ADVERTISED_100baseT_Half | + ADVERTISED_10baseT_Half); + } + if (adv.lp_duplex) + cmd->lp_advertising |= (ADVERTISED_1000baseT_Full | + ADVERTISED_100baseT_Full | + ADVERTISED_10baseT_Full); + else + cmd->lp_advertising |= (ADVERTISED_1000baseT_Half | + ADVERTISED_100baseT_Half | + ADVERTISED_10baseT_Half); + cmd->port = PORT_OTHER; + + return 0; + } + if (phy == NULL) { pr_err("%s: %s: PHY is not registered\n", __func__, dev->name); @@ -216,9 +322,7 @@ static int stmmac_ethtool_getsettings(struct net_device *dev, return -EBUSY; } cmd->transceiver = XCVR_INTERNAL; - spin_lock_irq(&priv->lock); rc = phy_ethtool_gset(phy, cmd); - spin_unlock_irq(&priv->lock); return rc; } @@ -229,6 +333,30 @@ static int stmmac_ethtool_setsettings(struct net_device *dev, struct phy_device *phy = priv->phydev; int rc; + if ((priv->pcs & STMMAC_PCS_RGMII) || (priv->pcs & STMMAC_PCS_SGMII)) { + u32 mask = ADVERTISED_Autoneg | ADVERTISED_Pause; + + /* Only support ANE */ + if (cmd->autoneg != AUTONEG_ENABLE) + return -EINVAL; + + if (cmd->autoneg == AUTONEG_ENABLE) { + mask &= (ADVERTISED_1000baseT_Half | + ADVERTISED_1000baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | + ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full); + + spin_lock(&priv->lock); + if (priv->hw->mac->ctrl_ane) + priv->hw->mac->ctrl_ane(priv->ioaddr, 1); + spin_unlock(&priv->lock); + } + + return 0; + } + spin_lock(&priv->lock); rc = phy_ethtool_sset(phy, cmd); spin_unlock(&priv->lock); @@ -298,7 +426,8 @@ stmmac_get_pauseparam(struct net_device *netdev, { struct stmmac_priv *priv = netdev_priv(netdev); - spin_lock(&priv->lock); + if (priv->pcs) /* FIXME */ + return; pause->rx_pause = 0; pause->tx_pause = 0; @@ -309,7 +438,6 @@ stmmac_get_pauseparam(struct net_device *netdev, if (priv->flow_ctrl & FLOW_TX) pause->tx_pause = 1; - spin_unlock(&priv->lock); } static int @@ -321,7 +449,8 @@ stmmac_set_pauseparam(struct net_device *netdev, int new_pause = FLOW_OFF; int ret = 0; - spin_lock(&priv->lock); + if (priv->pcs) /* FIXME */ + return -EOPNOTSUPP; if (pause->rx_pause) new_pause |= FLOW_RX; @@ -337,7 +466,6 @@ stmmac_set_pauseparam(struct net_device *netdev, } else priv->hw->mac->flow_ctrl(priv->ioaddr, phy->duplex, priv->flow_ctrl, priv->pause); - spin_unlock(&priv->lock); return ret; } @@ -366,6 +494,11 @@ static void stmmac_get_ethtool_stats(struct net_device *dev, (*(u32 *)p); } } + if (priv->eee_enabled) { + int val = phy_get_eee_err(priv->phydev); + if (val) + priv->xstats.phy_eee_wakeup_error_n = val; + } } for (i = 0; i < STMMAC_STATS_LEN; i++) { char *p = (char *)priv + stmmac_gstrings_stats[i].stat_offset; @@ -464,6 +597,159 @@ static int stmmac_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) return 0; } +static int stmmac_ethtool_op_get_eee(struct net_device *dev, + struct ethtool_eee *edata) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + if (!priv->dma_cap.eee) + return -EOPNOTSUPP; + + edata->eee_enabled = priv->eee_enabled; + edata->eee_active = priv->eee_active; + edata->tx_lpi_timer = priv->tx_lpi_timer; + + return phy_ethtool_get_eee(priv->phydev, edata); +} + +static int stmmac_ethtool_op_set_eee(struct net_device *dev, + struct ethtool_eee *edata) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + priv->eee_enabled = edata->eee_enabled; + + if (!priv->eee_enabled) + stmmac_disable_eee_mode(priv); + else { + /* We are asking for enabling the EEE but it is safe + * to verify all by invoking the eee_init function. + * In case of failure it will return an error. + */ + priv->eee_enabled = stmmac_eee_init(priv); + if (!priv->eee_enabled) + return -EOPNOTSUPP; + + /* Do not change tx_lpi_timer in case of failure */ + priv->tx_lpi_timer = edata->tx_lpi_timer; + } + + return phy_ethtool_set_eee(priv->phydev, edata); +} + +static u32 stmmac_usec2riwt(u32 usec, struct stmmac_priv *priv) +{ + unsigned long clk = clk_get_rate(priv->stmmac_clk); + + if (!clk) + return 0; + + return (usec * (clk / 1000000)) / 256; +} + +static u32 stmmac_riwt2usec(u32 riwt, struct stmmac_priv *priv) +{ + unsigned long clk = clk_get_rate(priv->stmmac_clk); + + if (!clk) + return 0; + + return (riwt * 256) / (clk / 1000000); +} + +static int stmmac_get_coalesce(struct net_device *dev, + struct ethtool_coalesce *ec) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + ec->tx_coalesce_usecs = priv->tx_coal_timer; + ec->tx_max_coalesced_frames = priv->tx_coal_frames; + + if (priv->use_riwt) + ec->rx_coalesce_usecs = stmmac_riwt2usec(priv->rx_riwt, priv); + + return 0; +} + +static int stmmac_set_coalesce(struct net_device *dev, + struct ethtool_coalesce *ec) +{ + struct stmmac_priv *priv = netdev_priv(dev); + unsigned int rx_riwt; + + /* Check not supported parameters */ + if ((ec->rx_max_coalesced_frames) || (ec->rx_coalesce_usecs_irq) || + (ec->rx_max_coalesced_frames_irq) || (ec->tx_coalesce_usecs_irq) || + (ec->use_adaptive_rx_coalesce) || (ec->use_adaptive_tx_coalesce) || + (ec->pkt_rate_low) || (ec->rx_coalesce_usecs_low) || + (ec->rx_max_coalesced_frames_low) || (ec->tx_coalesce_usecs_high) || + (ec->tx_max_coalesced_frames_low) || (ec->pkt_rate_high) || + (ec->tx_coalesce_usecs_low) || (ec->rx_coalesce_usecs_high) || + (ec->rx_max_coalesced_frames_high) || + (ec->tx_max_coalesced_frames_irq) || + (ec->stats_block_coalesce_usecs) || + (ec->tx_max_coalesced_frames_high) || (ec->rate_sample_interval)) + return -EOPNOTSUPP; + + if (ec->rx_coalesce_usecs == 0) + return -EINVAL; + + if ((ec->tx_coalesce_usecs == 0) && + (ec->tx_max_coalesced_frames == 0)) + return -EINVAL; + + if ((ec->tx_coalesce_usecs > STMMAC_COAL_TX_TIMER) || + (ec->tx_max_coalesced_frames > STMMAC_TX_MAX_FRAMES)) + return -EINVAL; + + rx_riwt = stmmac_usec2riwt(ec->rx_coalesce_usecs, priv); + + if ((rx_riwt > MAX_DMA_RIWT) || (rx_riwt < MIN_DMA_RIWT)) + return -EINVAL; + else if (!priv->use_riwt) + return -EOPNOTSUPP; + + /* Only copy relevant parameters, ignore all others. */ + priv->tx_coal_frames = ec->tx_max_coalesced_frames; + priv->tx_coal_timer = ec->tx_coalesce_usecs; + priv->rx_riwt = rx_riwt; + priv->hw->dma->rx_watchdog(priv->ioaddr, priv->rx_riwt); + + return 0; +} + +static int stmmac_get_ts_info(struct net_device *dev, + struct ethtool_ts_info *info) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + if ((priv->hwts_tx_en) && (priv->hwts_rx_en)) { + + info->so_timestamping = SOF_TIMESTAMPING_TX_HARDWARE | + SOF_TIMESTAMPING_RX_HARDWARE | + SOF_TIMESTAMPING_RAW_HARDWARE; + + if (priv->ptp_clock) + info->phc_index = ptp_clock_index(priv->ptp_clock); + + info->tx_types = (1 << HWTSTAMP_TX_OFF) | (1 << HWTSTAMP_TX_ON); + + info->rx_filters = ((1 << HWTSTAMP_FILTER_NONE) | + (1 << HWTSTAMP_FILTER_PTP_V1_L4_EVENT) | + (1 << HWTSTAMP_FILTER_PTP_V1_L4_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ) | + (1 << HWTSTAMP_FILTER_PTP_V2_L4_EVENT) | + (1 << HWTSTAMP_FILTER_PTP_V2_L4_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ) | + (1 << HWTSTAMP_FILTER_PTP_V2_EVENT) | + (1 << HWTSTAMP_FILTER_PTP_V2_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V2_DELAY_REQ) | + (1 << HWTSTAMP_FILTER_ALL)); + return 0; + } else + return ethtool_op_get_ts_info(dev, info); +} + static const struct ethtool_ops stmmac_ethtool_ops = { .begin = stmmac_check_if_running, .get_drvinfo = stmmac_ethtool_getdrvinfo, @@ -480,10 +766,15 @@ static const struct ethtool_ops stmmac_ethtool_ops = { .get_strings = stmmac_get_strings, .get_wol = stmmac_get_wol, .set_wol = stmmac_set_wol, + .get_eee = stmmac_ethtool_op_get_eee, + .set_eee = stmmac_ethtool_op_set_eee, .get_sset_count = stmmac_get_sset_count, + .get_ts_info = stmmac_get_ts_info, + .get_coalesce = stmmac_get_coalesce, + .set_coalesce = stmmac_set_coalesce, }; void stmmac_set_ethtool_ops(struct net_device *netdev) { - SET_ETHTOOL_OPS(netdev, &stmmac_ethtool_ops); + netdev->ethtool_ops = &stmmac_ethtool_ops; } diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c new file mode 100644 index 00000000000..76ad214b403 --- /dev/null +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c @@ -0,0 +1,148 @@ +/******************************************************************************* + Copyright (C) 2013 Vayavya Labs Pvt Ltd + + This implements all the API for managing HW timestamp & PTP. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Rayagond Kokatanur <rayagond@vayavyalabs.com> + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +#include <linux/io.h> +#include <linux/delay.h> +#include "common.h" +#include "stmmac_ptp.h" + +static void stmmac_config_hw_tstamping(void __iomem *ioaddr, u32 data) +{ + writel(data, ioaddr + PTP_TCR); +} + +static void stmmac_config_sub_second_increment(void __iomem *ioaddr) +{ + u32 value = readl(ioaddr + PTP_TCR); + unsigned long data; + + /* Convert the ptp_clock to nano second + * formula = (1/ptp_clock) * 1000000000 + * where, ptp_clock = 50MHz. + */ + data = (1000000000ULL / 50000000); + + /* 0.465ns accuracy */ + if (!(value & PTP_TCR_TSCTRLSSR)) + data = (data * 1000) / 465; + + writel(data, ioaddr + PTP_SSIR); +} + +static int stmmac_init_systime(void __iomem *ioaddr, u32 sec, u32 nsec) +{ + int limit; + u32 value; + + writel(sec, ioaddr + PTP_STSUR); + writel(nsec, ioaddr + PTP_STNSUR); + /* issue command to initialize the system time value */ + value = readl(ioaddr + PTP_TCR); + value |= PTP_TCR_TSINIT; + writel(value, ioaddr + PTP_TCR); + + /* wait for present system time initialize to complete */ + limit = 10; + while (limit--) { + if (!(readl(ioaddr + PTP_TCR) & PTP_TCR_TSINIT)) + break; + mdelay(10); + } + if (limit < 0) + return -EBUSY; + + return 0; +} + +static int stmmac_config_addend(void __iomem *ioaddr, u32 addend) +{ + u32 value; + int limit; + + writel(addend, ioaddr + PTP_TAR); + /* issue command to update the addend value */ + value = readl(ioaddr + PTP_TCR); + value |= PTP_TCR_TSADDREG; + writel(value, ioaddr + PTP_TCR); + + /* wait for present addend update to complete */ + limit = 10; + while (limit--) { + if (!(readl(ioaddr + PTP_TCR) & PTP_TCR_TSADDREG)) + break; + mdelay(10); + } + if (limit < 0) + return -EBUSY; + + return 0; +} + +static int stmmac_adjust_systime(void __iomem *ioaddr, u32 sec, u32 nsec, + int add_sub) +{ + u32 value; + int limit; + + writel(sec, ioaddr + PTP_STSUR); + writel(((add_sub << PTP_STNSUR_ADDSUB_SHIFT) | nsec), + ioaddr + PTP_STNSUR); + /* issue command to initialize the system time value */ + value = readl(ioaddr + PTP_TCR); + value |= PTP_TCR_TSUPDT; + writel(value, ioaddr + PTP_TCR); + + /* wait for present system time adjust/update to complete */ + limit = 10; + while (limit--) { + if (!(readl(ioaddr + PTP_TCR) & PTP_TCR_TSUPDT)) + break; + mdelay(10); + } + if (limit < 0) + return -EBUSY; + + return 0; +} + +static u64 stmmac_get_systime(void __iomem *ioaddr) +{ + u64 ns; + + ns = readl(ioaddr + PTP_STNSR); + /* convert sec time value to nanosecond */ + ns += readl(ioaddr + PTP_STSR) * 1000000000ULL; + + return ns; +} + +const struct stmmac_hwtimestamp stmmac_ptp = { + .config_hw_tstamping = stmmac_config_hw_tstamping, + .init_systime = stmmac_init_systime, + .config_sub_second_increment = stmmac_config_sub_second_increment, + .config_addend = stmmac_config_addend, + .adjust_systime = stmmac_adjust_systime, + .get_systime = stmmac_get_systime, +}; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 6ee593a55a6..057a1208e59 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -28,6 +28,7 @@ https://bugzilla.stlinux.com/ *******************************************************************************/ +#include <linux/clk.h> #include <linux/kernel.h> #include <linux/interrupt.h> #include <linux/ip.h> @@ -42,52 +43,29 @@ #include <linux/dma-mapping.h> #include <linux/slab.h> #include <linux/prefetch.h> +#include <linux/pinctrl/consumer.h> #ifdef CONFIG_STMMAC_DEBUG_FS #include <linux/debugfs.h> #include <linux/seq_file.h> -#endif +#endif /* CONFIG_STMMAC_DEBUG_FS */ +#include <linux/net_tstamp.h> +#include "stmmac_ptp.h" #include "stmmac.h" - -#undef STMMAC_DEBUG -/*#define STMMAC_DEBUG*/ -#ifdef STMMAC_DEBUG -#define DBG(nlevel, klevel, fmt, args...) \ - ((void)(netif_msg_##nlevel(priv) && \ - printk(KERN_##klevel fmt, ## args))) -#else -#define DBG(nlevel, klevel, fmt, args...) do { } while (0) -#endif - -#undef STMMAC_RX_DEBUG -/*#define STMMAC_RX_DEBUG*/ -#ifdef STMMAC_RX_DEBUG -#define RX_DBG(fmt, args...) printk(fmt, ## args) -#else -#define RX_DBG(fmt, args...) do { } while (0) -#endif - -#undef STMMAC_XMIT_DEBUG -/*#define STMMAC_XMIT_DEBUG*/ -#ifdef STMMAC_TX_DEBUG -#define TX_DBG(fmt, args...) printk(fmt, ## args) -#else -#define TX_DBG(fmt, args...) do { } while (0) -#endif +#include <linux/reset.h> #define STMMAC_ALIGN(x) L1_CACHE_ALIGN(x) -#define JUMBO_LEN 9000 /* Module parameters */ -#define TX_TIMEO 5000 /* default 5 seconds */ +#define TX_TIMEO 5000 static int watchdog = TX_TIMEO; module_param(watchdog, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(watchdog, "Transmit timeout in milliseconds"); +MODULE_PARM_DESC(watchdog, "Transmit timeout in milliseconds (default 5s)"); -static int debug = -1; /* -1: default, 0: no output, 16: all */ +static int debug = -1; module_param(debug, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Message Level (0: no output, 16: all)"); +MODULE_PARM_DESC(debug, "Message Level (-1: default, 0: no output, 16: all)"); -int phyaddr = -1; +static int phyaddr = -1; module_param(phyaddr, int, S_IRUGO); MODULE_PARM_DESC(phyaddr, "Physical device address"); @@ -114,18 +92,8 @@ static int tc = TC_DEFAULT; module_param(tc, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(tc, "DMA threshold control value"); -/* Pay attention to tune this parameter; take care of both - * hardware capability and network stabitily/performance impact. - * Many tests showed that ~4ms latency seems to be good enough. */ -#ifdef CONFIG_STMMAC_TIMER -#define DEFAULT_PERIODIC_RATE 256 -static int tmrate = DEFAULT_PERIODIC_RATE; -module_param(tmrate, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(tmrate, "External timer freq. (default: 256Hz)"); -#endif - -#define DMA_BUFFER_SIZE BUF_SIZE_2KiB -static int buf_sz = DMA_BUFFER_SIZE; +#define DEFAULT_BUFSIZE 1536 +static int buf_sz = DEFAULT_BUFSIZE; module_param(buf_sz, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(buf_sz, "DMA buffer size"); @@ -133,6 +101,19 @@ static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN | NETIF_MSG_TIMER); +#define STMMAC_DEFAULT_LPI_TIMER 1000 +static int eee_timer = STMMAC_DEFAULT_LPI_TIMER; +module_param(eee_timer, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(eee_timer, "LPI tx expiration time in msec"); +#define STMMAC_LPI_T(x) (jiffies + msecs_to_jiffies(x)) + +/* By default the driver will use the ring mode to manage tx and rx descriptors + * but passing this value so user can force to use the chain instead of the ring + */ +static unsigned int chain_mode; +module_param(chain_mode, int, S_IRUGO); +MODULE_PARM_DESC(chain_mode, "To use chain instead of ring mode"); + static irqreturn_t stmmac_interrupt(int irq, void *dev_id); #ifdef CONFIG_STMMAC_DEBUG_FS @@ -140,6 +121,8 @@ static int stmmac_init_fs(struct net_device *dev); static void stmmac_exit_fs(void); #endif +#define STMMAC_COAL_TIMER(x) (jiffies + usecs_to_jiffies(x)) + /** * stmmac_verify_args - verify the driver parameters. * Description: it verifies if some wrong parameter is passed to the driver. @@ -153,29 +136,70 @@ static void stmmac_verify_args(void) dma_rxsize = DMA_RX_SIZE; if (unlikely(dma_txsize < 0)) dma_txsize = DMA_TX_SIZE; - if (unlikely((buf_sz < DMA_BUFFER_SIZE) || (buf_sz > BUF_SIZE_16KiB))) - buf_sz = DMA_BUFFER_SIZE; + if (unlikely((buf_sz < DEFAULT_BUFSIZE) || (buf_sz > BUF_SIZE_16KiB))) + buf_sz = DEFAULT_BUFSIZE; if (unlikely(flow_ctrl > 1)) flow_ctrl = FLOW_AUTO; else if (likely(flow_ctrl < 0)) flow_ctrl = FLOW_OFF; if (unlikely((pause < 0) || (pause > 0xffff))) pause = PAUSE_TIME; + if (eee_timer < 0) + eee_timer = STMMAC_DEFAULT_LPI_TIMER; +} + +/** + * stmmac_clk_csr_set - dynamically set the MDC clock + * @priv: driver private structure + * Description: this is to dynamically set the MDC clock according to the csr + * clock input. + * Note: + * If a specific clk_csr value is passed from the platform + * this means that the CSR Clock Range selection cannot be + * changed at run-time and it is fixed (as reported in the driver + * documentation). Viceversa the driver will try to set the MDC + * clock dynamically according to the actual clock input. + */ +static void stmmac_clk_csr_set(struct stmmac_priv *priv) +{ + u32 clk_rate; + + clk_rate = clk_get_rate(priv->stmmac_clk); + + /* Platform provided default clk_csr would be assumed valid + * for all other cases except for the below mentioned ones. + * For values higher than the IEEE 802.3 specified frequency + * we can not estimate the proper divider as it is not known + * the frequency of clk_csr_i. So we do not change the default + * divider. + */ + if (!(priv->clk_csr & MAC_CSR_H_FRQ_MASK)) { + if (clk_rate < CSR_F_35M) + priv->clk_csr = STMMAC_CSR_20_35M; + else if ((clk_rate >= CSR_F_35M) && (clk_rate < CSR_F_60M)) + priv->clk_csr = STMMAC_CSR_35_60M; + else if ((clk_rate >= CSR_F_60M) && (clk_rate < CSR_F_100M)) + priv->clk_csr = STMMAC_CSR_60_100M; + else if ((clk_rate >= CSR_F_100M) && (clk_rate < CSR_F_150M)) + priv->clk_csr = STMMAC_CSR_100_150M; + else if ((clk_rate >= CSR_F_150M) && (clk_rate < CSR_F_250M)) + priv->clk_csr = STMMAC_CSR_150_250M; + else if ((clk_rate >= CSR_F_250M) && (clk_rate < CSR_F_300M)) + priv->clk_csr = STMMAC_CSR_250_300M; + } } -#if defined(STMMAC_XMIT_DEBUG) || defined(STMMAC_RX_DEBUG) static void print_pkt(unsigned char *buf, int len) { int j; - pr_info("len = %d byte, buf addr: 0x%p", len, buf); + pr_debug("len = %d byte, buf addr: 0x%p", len, buf); for (j = 0; j < len; j++) { if ((j % 16) == 0) - pr_info("\n %03x:", j); - pr_info(" %02x", buf[j]); + pr_debug("\n %03x:", j); + pr_debug(" %02x", buf[j]); } - pr_info("\n"); + pr_debug("\n"); } -#endif /* minimum number of free TX descriptors required to wake up TX process */ #define STMMAC_TX_THRESH(x) (x->dma_tx_size/4) @@ -185,16 +209,455 @@ static inline u32 stmmac_tx_avail(struct stmmac_priv *priv) return priv->dirty_tx + priv->dma_tx_size - priv->cur_tx - 1; } -/* On some ST platforms, some HW system configuraton registers have to be - * set according to the link speed negotiated. +/** + * stmmac_hw_fix_mac_speed: callback for speed selection + * @priv: driver private structure + * Description: on some platforms (e.g. ST), some HW system configuraton + * registers have to be set according to the link speed negotiated. */ static inline void stmmac_hw_fix_mac_speed(struct stmmac_priv *priv) { struct phy_device *phydev = priv->phydev; if (likely(priv->plat->fix_mac_speed)) - priv->plat->fix_mac_speed(priv->plat->bsp_priv, - phydev->speed); + priv->plat->fix_mac_speed(priv->plat->bsp_priv, phydev->speed); +} + +/** + * stmmac_enable_eee_mode: Check and enter in LPI mode + * @priv: driver private structure + * Description: this function is to verify and enter in LPI mode for EEE. + */ +static void stmmac_enable_eee_mode(struct stmmac_priv *priv) +{ + /* Check and enter in LPI mode */ + if ((priv->dirty_tx == priv->cur_tx) && + (priv->tx_path_in_lpi_mode == false)) + priv->hw->mac->set_eee_mode(priv->ioaddr); +} + +/** + * stmmac_disable_eee_mode: disable/exit from EEE + * @priv: driver private structure + * Description: this function is to exit and disable EEE in case of + * LPI state is true. This is called by the xmit. + */ +void stmmac_disable_eee_mode(struct stmmac_priv *priv) +{ + priv->hw->mac->reset_eee_mode(priv->ioaddr); + del_timer_sync(&priv->eee_ctrl_timer); + priv->tx_path_in_lpi_mode = false; +} + +/** + * stmmac_eee_ctrl_timer: EEE TX SW timer. + * @arg : data hook + * Description: + * if there is no data transfer and if we are not in LPI state, + * then MAC Transmitter can be moved to LPI state. + */ +static void stmmac_eee_ctrl_timer(unsigned long arg) +{ + struct stmmac_priv *priv = (struct stmmac_priv *)arg; + + stmmac_enable_eee_mode(priv); + mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_T(eee_timer)); +} + +/** + * stmmac_eee_init: init EEE + * @priv: driver private structure + * Description: + * If the EEE support has been enabled while configuring the driver, + * if the GMAC actually supports the EEE (from the HW cap reg) and the + * phy can also manage EEE, so enable the LPI state and start the timer + * to verify if the tx path can enter in LPI state. + */ +bool stmmac_eee_init(struct stmmac_priv *priv) +{ + bool ret = false; + + /* Using PCS we cannot dial with the phy registers at this stage + * so we do not support extra feature like EEE. + */ + if ((priv->pcs == STMMAC_PCS_RGMII) || (priv->pcs == STMMAC_PCS_TBI) || + (priv->pcs == STMMAC_PCS_RTBI)) + goto out; + + /* MAC core supports the EEE feature. */ + if (priv->dma_cap.eee) { + int tx_lpi_timer = priv->tx_lpi_timer; + + /* Check if the PHY supports EEE */ + if (phy_init_eee(priv->phydev, 1)) { + /* To manage at run-time if the EEE cannot be supported + * anymore (for example because the lp caps have been + * changed). + * In that case the driver disable own timers. + */ + if (priv->eee_active) { + pr_debug("stmmac: disable EEE\n"); + del_timer_sync(&priv->eee_ctrl_timer); + priv->hw->mac->set_eee_timer(priv->ioaddr, 0, + tx_lpi_timer); + } + priv->eee_active = 0; + goto out; + } + /* Activate the EEE and start timers */ + if (!priv->eee_active) { + priv->eee_active = 1; + init_timer(&priv->eee_ctrl_timer); + priv->eee_ctrl_timer.function = stmmac_eee_ctrl_timer; + priv->eee_ctrl_timer.data = (unsigned long)priv; + priv->eee_ctrl_timer.expires = STMMAC_LPI_T(eee_timer); + add_timer(&priv->eee_ctrl_timer); + + priv->hw->mac->set_eee_timer(priv->ioaddr, + STMMAC_DEFAULT_LIT_LS, + tx_lpi_timer); + } else + /* Set HW EEE according to the speed */ + priv->hw->mac->set_eee_pls(priv->ioaddr, + priv->phydev->link); + + pr_debug("stmmac: Energy-Efficient Ethernet initialized\n"); + + ret = true; + } +out: + return ret; +} + +/* stmmac_get_tx_hwtstamp: get HW TX timestamps + * @priv: driver private structure + * @entry : descriptor index to be used. + * @skb : the socket buffer + * Description : + * This function will read timestamp from the descriptor & pass it to stack. + * and also perform some sanity checks. + */ +static void stmmac_get_tx_hwtstamp(struct stmmac_priv *priv, + unsigned int entry, struct sk_buff *skb) +{ + struct skb_shared_hwtstamps shhwtstamp; + u64 ns; + void *desc = NULL; + + if (!priv->hwts_tx_en) + return; + + /* exit if skb doesn't support hw tstamp */ + if (likely(!skb || !(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS))) + return; + + if (priv->adv_ts) + desc = (priv->dma_etx + entry); + else + desc = (priv->dma_tx + entry); + + /* check tx tstamp status */ + if (!priv->hw->desc->get_tx_timestamp_status((struct dma_desc *)desc)) + return; + + /* get the valid tstamp */ + ns = priv->hw->desc->get_timestamp(desc, priv->adv_ts); + + memset(&shhwtstamp, 0, sizeof(struct skb_shared_hwtstamps)); + shhwtstamp.hwtstamp = ns_to_ktime(ns); + /* pass tstamp to stack */ + skb_tstamp_tx(skb, &shhwtstamp); + + return; +} + +/* stmmac_get_rx_hwtstamp: get HW RX timestamps + * @priv: driver private structure + * @entry : descriptor index to be used. + * @skb : the socket buffer + * Description : + * This function will read received packet's timestamp from the descriptor + * and pass it to stack. It also perform some sanity checks. + */ +static void stmmac_get_rx_hwtstamp(struct stmmac_priv *priv, + unsigned int entry, struct sk_buff *skb) +{ + struct skb_shared_hwtstamps *shhwtstamp = NULL; + u64 ns; + void *desc = NULL; + + if (!priv->hwts_rx_en) + return; + + if (priv->adv_ts) + desc = (priv->dma_erx + entry); + else + desc = (priv->dma_rx + entry); + + /* exit if rx tstamp is not valid */ + if (!priv->hw->desc->get_rx_timestamp_status(desc, priv->adv_ts)) + return; + + /* get valid tstamp */ + ns = priv->hw->desc->get_timestamp(desc, priv->adv_ts); + shhwtstamp = skb_hwtstamps(skb); + memset(shhwtstamp, 0, sizeof(struct skb_shared_hwtstamps)); + shhwtstamp->hwtstamp = ns_to_ktime(ns); +} + +/** + * stmmac_hwtstamp_ioctl - control hardware timestamping. + * @dev: device pointer. + * @ifr: An IOCTL specefic structure, that can contain a pointer to + * a proprietary structure used to pass information to the driver. + * Description: + * This function configures the MAC to enable/disable both outgoing(TX) + * and incoming(RX) packets time stamping based on user input. + * Return Value: + * 0 on success and an appropriate -ve integer on failure. + */ +static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr) +{ + struct stmmac_priv *priv = netdev_priv(dev); + struct hwtstamp_config config; + struct timespec now; + u64 temp = 0; + u32 ptp_v2 = 0; + u32 tstamp_all = 0; + u32 ptp_over_ipv4_udp = 0; + u32 ptp_over_ipv6_udp = 0; + u32 ptp_over_ethernet = 0; + u32 snap_type_sel = 0; + u32 ts_master_en = 0; + u32 ts_event_en = 0; + u32 value = 0; + + if (!(priv->dma_cap.time_stamp || priv->adv_ts)) { + netdev_alert(priv->dev, "No support for HW time stamping\n"); + priv->hwts_tx_en = 0; + priv->hwts_rx_en = 0; + + return -EOPNOTSUPP; + } + + if (copy_from_user(&config, ifr->ifr_data, + sizeof(struct hwtstamp_config))) + return -EFAULT; + + pr_debug("%s config flags:0x%x, tx_type:0x%x, rx_filter:0x%x\n", + __func__, config.flags, config.tx_type, config.rx_filter); + + /* reserved for future extensions */ + if (config.flags) + return -EINVAL; + + if (config.tx_type != HWTSTAMP_TX_OFF && + config.tx_type != HWTSTAMP_TX_ON) + return -ERANGE; + + if (priv->adv_ts) { + switch (config.rx_filter) { + case HWTSTAMP_FILTER_NONE: + /* time stamp no incoming packet at all */ + config.rx_filter = HWTSTAMP_FILTER_NONE; + break; + + case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: + /* PTP v1, UDP, any kind of event packet */ + config.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT; + /* take time stamp for all event messages */ + snap_type_sel = PTP_TCR_SNAPTYPSEL_1; + + ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA; + ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA; + break; + + case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: + /* PTP v1, UDP, Sync packet */ + config.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_SYNC; + /* take time stamp for SYNC messages only */ + ts_event_en = PTP_TCR_TSEVNTENA; + + ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA; + ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA; + break; + + case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: + /* PTP v1, UDP, Delay_req packet */ + config.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ; + /* take time stamp for Delay_Req messages only */ + ts_master_en = PTP_TCR_TSMSTRENA; + ts_event_en = PTP_TCR_TSEVNTENA; + + ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA; + ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA; + break; + + case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: + /* PTP v2, UDP, any kind of event packet */ + config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_EVENT; + ptp_v2 = PTP_TCR_TSVER2ENA; + /* take time stamp for all event messages */ + snap_type_sel = PTP_TCR_SNAPTYPSEL_1; + + ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA; + ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA; + break; + + case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: + /* PTP v2, UDP, Sync packet */ + config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_SYNC; + ptp_v2 = PTP_TCR_TSVER2ENA; + /* take time stamp for SYNC messages only */ + ts_event_en = PTP_TCR_TSEVNTENA; + + ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA; + ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA; + break; + + case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: + /* PTP v2, UDP, Delay_req packet */ + config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ; + ptp_v2 = PTP_TCR_TSVER2ENA; + /* take time stamp for Delay_Req messages only */ + ts_master_en = PTP_TCR_TSMSTRENA; + ts_event_en = PTP_TCR_TSEVNTENA; + + ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA; + ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA; + break; + + case HWTSTAMP_FILTER_PTP_V2_EVENT: + /* PTP v2/802.AS1 any layer, any kind of event packet */ + config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT; + ptp_v2 = PTP_TCR_TSVER2ENA; + /* take time stamp for all event messages */ + snap_type_sel = PTP_TCR_SNAPTYPSEL_1; + + ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA; + ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA; + ptp_over_ethernet = PTP_TCR_TSIPENA; + break; + + case HWTSTAMP_FILTER_PTP_V2_SYNC: + /* PTP v2/802.AS1, any layer, Sync packet */ + config.rx_filter = HWTSTAMP_FILTER_PTP_V2_SYNC; + ptp_v2 = PTP_TCR_TSVER2ENA; + /* take time stamp for SYNC messages only */ + ts_event_en = PTP_TCR_TSEVNTENA; + + ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA; + ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA; + ptp_over_ethernet = PTP_TCR_TSIPENA; + break; + + case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: + /* PTP v2/802.AS1, any layer, Delay_req packet */ + config.rx_filter = HWTSTAMP_FILTER_PTP_V2_DELAY_REQ; + ptp_v2 = PTP_TCR_TSVER2ENA; + /* take time stamp for Delay_Req messages only */ + ts_master_en = PTP_TCR_TSMSTRENA; + ts_event_en = PTP_TCR_TSEVNTENA; + + ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA; + ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA; + ptp_over_ethernet = PTP_TCR_TSIPENA; + break; + + case HWTSTAMP_FILTER_ALL: + /* time stamp any incoming packet */ + config.rx_filter = HWTSTAMP_FILTER_ALL; + tstamp_all = PTP_TCR_TSENALL; + break; + + default: + return -ERANGE; + } + } else { + switch (config.rx_filter) { + case HWTSTAMP_FILTER_NONE: + config.rx_filter = HWTSTAMP_FILTER_NONE; + break; + default: + /* PTP v1, UDP, any kind of event packet */ + config.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT; + break; + } + } + priv->hwts_rx_en = ((config.rx_filter == HWTSTAMP_FILTER_NONE) ? 0 : 1); + priv->hwts_tx_en = config.tx_type == HWTSTAMP_TX_ON; + + if (!priv->hwts_tx_en && !priv->hwts_rx_en) + priv->hw->ptp->config_hw_tstamping(priv->ioaddr, 0); + else { + value = (PTP_TCR_TSENA | PTP_TCR_TSCFUPDT | PTP_TCR_TSCTRLSSR | + tstamp_all | ptp_v2 | ptp_over_ethernet | + ptp_over_ipv6_udp | ptp_over_ipv4_udp | ts_event_en | + ts_master_en | snap_type_sel); + + priv->hw->ptp->config_hw_tstamping(priv->ioaddr, value); + + /* program Sub Second Increment reg */ + priv->hw->ptp->config_sub_second_increment(priv->ioaddr); + + /* calculate default added value: + * formula is : + * addend = (2^32)/freq_div_ratio; + * where, freq_div_ratio = STMMAC_SYSCLOCK/50MHz + * hence, addend = ((2^32) * 50MHz)/STMMAC_SYSCLOCK; + * NOTE: STMMAC_SYSCLOCK should be >= 50MHz to + * achive 20ns accuracy. + * + * 2^x * y == (y << x), hence + * 2^32 * 50000000 ==> (50000000 << 32) + */ + temp = (u64) (50000000ULL << 32); + priv->default_addend = div_u64(temp, STMMAC_SYSCLOCK); + priv->hw->ptp->config_addend(priv->ioaddr, + priv->default_addend); + + /* initialize system time */ + getnstimeofday(&now); + priv->hw->ptp->init_systime(priv->ioaddr, now.tv_sec, + now.tv_nsec); + } + + return copy_to_user(ifr->ifr_data, &config, + sizeof(struct hwtstamp_config)) ? -EFAULT : 0; +} + +/** + * stmmac_init_ptp: init PTP + * @priv: driver private structure + * Description: this is to verify if the HW supports the PTPv1 or v2. + * This is done by looking at the HW cap. register. + * Also it registers the ptp driver. + */ +static int stmmac_init_ptp(struct stmmac_priv *priv) +{ + if (!(priv->dma_cap.time_stamp || priv->dma_cap.atime_stamp)) + return -EOPNOTSUPP; + + priv->adv_ts = 0; + if (priv->dma_cap.atime_stamp && priv->extend_desc) + priv->adv_ts = 1; + + if (netif_msg_hw(priv) && priv->dma_cap.time_stamp) + pr_debug("IEEE 1588-2002 Time Stamp supported\n"); + + if (netif_msg_hw(priv) && priv->adv_ts) + pr_debug("IEEE 1588-2008 Advanced Time Stamp supported\n"); + + priv->hw->ptp = &stmmac_ptp; + priv->hwts_tx_en = 0; + priv->hwts_rx_en = 0; + + return stmmac_ptp_register(priv); +} + +static void stmmac_release_ptp(struct stmmac_priv *priv) +{ + stmmac_ptp_unregister(priv); } /** @@ -213,10 +676,8 @@ static void stmmac_adjust_link(struct net_device *dev) if (phydev == NULL) return; - DBG(probe, DEBUG, "stmmac_adjust_link: called. address %d link %d\n", - phydev->addr, phydev->link); - spin_lock_irqsave(&priv->lock, flags); + if (phydev->link) { u32 ctrl = readl(priv->ioaddr + MAC_CTRL_REG); @@ -241,7 +702,7 @@ static void stmmac_adjust_link(struct net_device *dev) case 1000: if (likely(priv->plat->has_gmac)) ctrl &= ~priv->hw->link.port; - stmmac_hw_fix_mac_speed(priv); + stmmac_hw_fix_mac_speed(priv); break; case 100: case 10: @@ -259,8 +720,8 @@ static void stmmac_adjust_link(struct net_device *dev) break; default: if (netif_msg_link(priv)) - pr_warning("%s: Speed (%d) is not 10" - " or 100!\n", dev->name, phydev->speed); + pr_warn("%s: Speed (%d) not 10/100\n", + dev->name, phydev->speed); break; } @@ -283,9 +744,37 @@ static void stmmac_adjust_link(struct net_device *dev) if (new_state && netif_msg_link(priv)) phy_print_status(phydev); + /* At this stage, it could be needed to setup the EEE or adjust some + * MAC related HW registers. + */ + priv->eee_enabled = stmmac_eee_init(priv); + spin_unlock_irqrestore(&priv->lock, flags); +} - DBG(probe, DEBUG, "stmmac_adjust_link: exiting\n"); +/** + * stmmac_check_pcs_mode: verify if RGMII/SGMII is supported + * @priv: driver private structure + * Description: this is to verify if the HW supports the PCS. + * Physical Coding Sublayer (PCS) interface that can be used when the MAC is + * configured for the TBI, RTBI, or SGMII PHY interface. + */ +static void stmmac_check_pcs_mode(struct stmmac_priv *priv) +{ + int interface = priv->plat->interface; + + if (priv->dma_cap.pcs) { + if ((interface == PHY_INTERFACE_MODE_RGMII) || + (interface == PHY_INTERFACE_MODE_RGMII_ID) || + (interface == PHY_INTERFACE_MODE_RGMII_RXID) || + (interface == PHY_INTERFACE_MODE_RGMII_TXID)) { + pr_debug("STMMAC: PCS RGMII support enable\n"); + priv->pcs = STMMAC_PCS_RGMII; + } else if (interface == PHY_INTERFACE_MODE_SGMII) { + pr_debug("STMMAC: PCS SGMII support enable\n"); + priv->pcs = STMMAC_PCS_SGMII; + } + } } /** @@ -300,19 +789,26 @@ static int stmmac_init_phy(struct net_device *dev) { struct stmmac_priv *priv = netdev_priv(dev); struct phy_device *phydev; - char phy_id[MII_BUS_ID_SIZE + 3]; + char phy_id_fmt[MII_BUS_ID_SIZE + 3]; char bus_id[MII_BUS_ID_SIZE]; int interface = priv->plat->interface; + int max_speed = priv->plat->max_speed; priv->oldlink = 0; priv->speed = 0; priv->oldduplex = -1; - snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x", priv->plat->bus_id); - snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id, + if (priv->plat->phy_bus_name) + snprintf(bus_id, MII_BUS_ID_SIZE, "%s-%x", + priv->plat->phy_bus_name, priv->plat->bus_id); + else + snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x", + priv->plat->bus_id); + + snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id, priv->plat->phy_addr); - pr_debug("stmmac_init_phy: trying to attach to %s\n", phy_id); + pr_debug("stmmac_init_phy: trying to attach to %s\n", phy_id_fmt); - phydev = phy_connect(dev, phy_id, &stmmac_adjust_link, 0, interface); + phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link, interface); if (IS_ERR(phydev)) { pr_err("%s: Could not attach to PHY\n", dev->name); @@ -321,7 +817,8 @@ static int stmmac_init_phy(struct net_device *dev) /* Stop Advertising 1000BASE Capability if interface is not GMII */ if ((interface == PHY_INTERFACE_MODE_MII) || - (interface == PHY_INTERFACE_MODE_RMII)) + (interface == PHY_INTERFACE_MODE_RMII) || + (max_speed < 1000 && max_speed > 0)) phydev->advertising &= ~(SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full); @@ -345,29 +842,57 @@ static int stmmac_init_phy(struct net_device *dev) } /** - * display_ring - * @p: pointer to the ring. + * stmmac_display_ring: display ring + * @head: pointer to the head of the ring passed. * @size: size of the ring. - * Description: display all the descriptors within the ring. + * @extend_desc: to verify if extended descriptors are used. + * Description: display the control/status and buffer descriptors. */ -static void display_ring(struct dma_desc *p, int size) +static void stmmac_display_ring(void *head, int size, int extend_desc) { - struct tmp_s { - u64 a; - unsigned int b; - unsigned int c; - }; int i; + struct dma_extended_desc *ep = (struct dma_extended_desc *)head; + struct dma_desc *p = (struct dma_desc *)head; + for (i = 0; i < size; i++) { - struct tmp_s *x = (struct tmp_s *)(p + i); - pr_info("\t%d [0x%x]: DES0=0x%x DES1=0x%x BUF1=0x%x BUF2=0x%x", - i, (unsigned int)virt_to_phys(&p[i]), - (unsigned int)(x->a), (unsigned int)((x->a) >> 32), - x->b, x->c); + u64 x; + if (extend_desc) { + x = *(u64 *) ep; + pr_info("%d [0x%x]: 0x%x 0x%x 0x%x 0x%x\n", + i, (unsigned int)virt_to_phys(ep), + (unsigned int)x, (unsigned int)(x >> 32), + ep->basic.des2, ep->basic.des3); + ep++; + } else { + x = *(u64 *) p; + pr_info("%d [0x%x]: 0x%x 0x%x 0x%x 0x%x", + i, (unsigned int)virt_to_phys(p), + (unsigned int)x, (unsigned int)(x >> 32), + p->des2, p->des3); + p++; + } pr_info("\n"); } } +static void stmmac_display_rings(struct stmmac_priv *priv) +{ + unsigned int txsize = priv->dma_tx_size; + unsigned int rxsize = priv->dma_rx_size; + + if (priv->extend_desc) { + pr_info("Extended RX descriptor ring:\n"); + stmmac_display_ring((void *)priv->dma_erx, rxsize, 1); + pr_info("Extended TX descriptor ring:\n"); + stmmac_display_ring((void *)priv->dma_etx, txsize, 1); + } else { + pr_info("RX descriptor ring:\n"); + stmmac_display_ring((void *)priv->dma_rx, rxsize, 0); + pr_info("TX descriptor ring:\n"); + stmmac_display_ring((void *)priv->dma_tx, txsize, 0); + } +} + static int stmmac_set_bfsize(int mtu, int bufsize) { int ret = bufsize; @@ -376,146 +901,191 @@ static int stmmac_set_bfsize(int mtu, int bufsize) ret = BUF_SIZE_8KiB; else if (mtu >= BUF_SIZE_2KiB) ret = BUF_SIZE_4KiB; - else if (mtu >= DMA_BUFFER_SIZE) + else if (mtu > DEFAULT_BUFSIZE) ret = BUF_SIZE_2KiB; else - ret = DMA_BUFFER_SIZE; + ret = DEFAULT_BUFSIZE; return ret; } /** + * stmmac_clear_descriptors: clear descriptors + * @priv: driver private structure + * Description: this function is called to clear the tx and rx descriptors + * in case of both basic and extended descriptors are used. + */ +static void stmmac_clear_descriptors(struct stmmac_priv *priv) +{ + int i; + unsigned int txsize = priv->dma_tx_size; + unsigned int rxsize = priv->dma_rx_size; + + /* Clear the Rx/Tx descriptors */ + for (i = 0; i < rxsize; i++) + if (priv->extend_desc) + priv->hw->desc->init_rx_desc(&priv->dma_erx[i].basic, + priv->use_riwt, priv->mode, + (i == rxsize - 1)); + else + priv->hw->desc->init_rx_desc(&priv->dma_rx[i], + priv->use_riwt, priv->mode, + (i == rxsize - 1)); + for (i = 0; i < txsize; i++) + if (priv->extend_desc) + priv->hw->desc->init_tx_desc(&priv->dma_etx[i].basic, + priv->mode, + (i == txsize - 1)); + else + priv->hw->desc->init_tx_desc(&priv->dma_tx[i], + priv->mode, + (i == txsize - 1)); +} + +static int stmmac_init_rx_buffers(struct stmmac_priv *priv, struct dma_desc *p, + int i) +{ + struct sk_buff *skb; + + skb = __netdev_alloc_skb(priv->dev, priv->dma_buf_sz + NET_IP_ALIGN, + GFP_KERNEL); + if (!skb) { + pr_err("%s: Rx init fails; skb is NULL\n", __func__); + return -ENOMEM; + } + skb_reserve(skb, NET_IP_ALIGN); + priv->rx_skbuff[i] = skb; + priv->rx_skbuff_dma[i] = dma_map_single(priv->device, skb->data, + priv->dma_buf_sz, + DMA_FROM_DEVICE); + if (dma_mapping_error(priv->device, priv->rx_skbuff_dma[i])) { + pr_err("%s: DMA mapping error\n", __func__); + dev_kfree_skb_any(skb); + return -EINVAL; + } + + p->des2 = priv->rx_skbuff_dma[i]; + + if ((priv->hw->mode->init_desc3) && + (priv->dma_buf_sz == BUF_SIZE_16KiB)) + priv->hw->mode->init_desc3(p); + + return 0; +} + +static void stmmac_free_rx_buffers(struct stmmac_priv *priv, int i) +{ + if (priv->rx_skbuff[i]) { + dma_unmap_single(priv->device, priv->rx_skbuff_dma[i], + priv->dma_buf_sz, DMA_FROM_DEVICE); + dev_kfree_skb_any(priv->rx_skbuff[i]); + } + priv->rx_skbuff[i] = NULL; +} + +/** * init_dma_desc_rings - init the RX/TX descriptor rings * @dev: net device structure * Description: this function initializes the DMA RX/TX descriptors * and allocates the socket buffers. It suppors the chained and ring * modes. */ -static void init_dma_desc_rings(struct net_device *dev) +static int init_dma_desc_rings(struct net_device *dev) { int i; struct stmmac_priv *priv = netdev_priv(dev); - struct sk_buff *skb; unsigned int txsize = priv->dma_tx_size; unsigned int rxsize = priv->dma_rx_size; - unsigned int bfsize; - int dis_ic = 0; - int des3_as_data_buf = 0; + unsigned int bfsize = 0; + int ret = -ENOMEM; - /* Set the max buffer size according to the DESC mode - * and the MTU. Note that RING mode allows 16KiB bsize. */ - bfsize = priv->hw->ring->set_16kib_bfsize(dev->mtu); + if (priv->hw->mode->set_16kib_bfsize) + bfsize = priv->hw->mode->set_16kib_bfsize(dev->mtu); - if (bfsize == BUF_SIZE_16KiB) - des3_as_data_buf = 1; - else + if (bfsize < BUF_SIZE_16KiB) bfsize = stmmac_set_bfsize(dev->mtu, priv->dma_buf_sz); -#ifdef CONFIG_STMMAC_TIMER - /* Disable interrupts on completion for the reception if timer is on */ - if (likely(priv->tm->enable)) - dis_ic = 1; -#endif + priv->dma_buf_sz = bfsize; - DBG(probe, INFO, "stmmac: txsize %d, rxsize %d, bfsize %d\n", - txsize, rxsize, bfsize); + if (netif_msg_probe(priv)) + pr_debug("%s: txsize %d, rxsize %d, bfsize %d\n", __func__, + txsize, rxsize, bfsize); - priv->rx_skbuff_dma = kmalloc(rxsize * sizeof(dma_addr_t), GFP_KERNEL); - priv->rx_skbuff = - kmalloc(sizeof(struct sk_buff *) * rxsize, GFP_KERNEL); - priv->dma_rx = - (struct dma_desc *)dma_alloc_coherent(priv->device, - rxsize * - sizeof(struct dma_desc), - &priv->dma_rx_phy, - GFP_KERNEL); - priv->tx_skbuff = kmalloc(sizeof(struct sk_buff *) * txsize, - GFP_KERNEL); - priv->dma_tx = - (struct dma_desc *)dma_alloc_coherent(priv->device, - txsize * - sizeof(struct dma_desc), - &priv->dma_tx_phy, - GFP_KERNEL); + if (netif_msg_probe(priv)) { + pr_debug("(%s) dma_rx_phy=0x%08x dma_tx_phy=0x%08x\n", __func__, + (u32) priv->dma_rx_phy, (u32) priv->dma_tx_phy); - if ((priv->dma_rx == NULL) || (priv->dma_tx == NULL)) { - pr_err("%s:ERROR allocating the DMA Tx/Rx desc\n", __func__); - return; + /* RX INITIALIZATION */ + pr_debug("\tSKB addresses:\nskb\t\tskb data\tdma data\n"); } - - DBG(probe, INFO, "stmmac (%s) DMA desc: virt addr (Rx %p, " - "Tx %p)\n\tDMA phy addr (Rx 0x%08x, Tx 0x%08x)\n", - dev->name, priv->dma_rx, priv->dma_tx, - (unsigned int)priv->dma_rx_phy, (unsigned int)priv->dma_tx_phy); - - /* RX INITIALIZATION */ - DBG(probe, INFO, "stmmac: SKB addresses:\n" - "skb\t\tskb data\tdma data\n"); - for (i = 0; i < rxsize; i++) { - struct dma_desc *p = priv->dma_rx + i; - - skb = __netdev_alloc_skb(dev, bfsize + NET_IP_ALIGN, - GFP_KERNEL); - if (unlikely(skb == NULL)) { - pr_err("%s: Rx init fails; skb is NULL\n", __func__); - break; - } - skb_reserve(skb, NET_IP_ALIGN); - priv->rx_skbuff[i] = skb; - priv->rx_skbuff_dma[i] = dma_map_single(priv->device, skb->data, - bfsize, DMA_FROM_DEVICE); - - p->des2 = priv->rx_skbuff_dma[i]; - - priv->hw->ring->init_desc3(des3_as_data_buf, p); - - DBG(probe, INFO, "[%p]\t[%p]\t[%x]\n", priv->rx_skbuff[i], - priv->rx_skbuff[i]->data, priv->rx_skbuff_dma[i]); + struct dma_desc *p; + if (priv->extend_desc) + p = &((priv->dma_erx + i)->basic); + else + p = priv->dma_rx + i; + + ret = stmmac_init_rx_buffers(priv, p, i); + if (ret) + goto err_init_rx_buffers; + + if (netif_msg_probe(priv)) + pr_debug("[%p]\t[%p]\t[%x]\n", priv->rx_skbuff[i], + priv->rx_skbuff[i]->data, + (unsigned int)priv->rx_skbuff_dma[i]); } priv->cur_rx = 0; priv->dirty_rx = (unsigned int)(i - rxsize); - priv->dma_buf_sz = bfsize; buf_sz = bfsize; + /* Setup the chained descriptor addresses */ + if (priv->mode == STMMAC_CHAIN_MODE) { + if (priv->extend_desc) { + priv->hw->mode->init(priv->dma_erx, priv->dma_rx_phy, + rxsize, 1); + priv->hw->mode->init(priv->dma_etx, priv->dma_tx_phy, + txsize, 1); + } else { + priv->hw->mode->init(priv->dma_rx, priv->dma_rx_phy, + rxsize, 0); + priv->hw->mode->init(priv->dma_tx, priv->dma_tx_phy, + txsize, 0); + } + } + /* TX INITIALIZATION */ for (i = 0; i < txsize; i++) { + struct dma_desc *p; + if (priv->extend_desc) + p = &((priv->dma_etx + i)->basic); + else + p = priv->dma_tx + i; + p->des2 = 0; + priv->tx_skbuff_dma[i] = 0; priv->tx_skbuff[i] = NULL; - priv->dma_tx[i].des2 = 0; } - /* In case of Chained mode this sets the des3 to the next - * element in the chain */ - priv->hw->ring->init_dma_chain(priv->dma_rx, priv->dma_rx_phy, rxsize); - priv->hw->ring->init_dma_chain(priv->dma_tx, priv->dma_tx_phy, txsize); - priv->dirty_tx = 0; priv->cur_tx = 0; - /* Clear the Rx/Tx descriptors */ - priv->hw->desc->init_rx_desc(priv->dma_rx, rxsize, dis_ic); - priv->hw->desc->init_tx_desc(priv->dma_tx, txsize); + stmmac_clear_descriptors(priv); - if (netif_msg_hw(priv)) { - pr_info("RX descriptor ring:\n"); - display_ring(priv->dma_rx, rxsize); - pr_info("TX descriptor ring:\n"); - display_ring(priv->dma_tx, txsize); - } + if (netif_msg_hw(priv)) + stmmac_display_rings(priv); + + return 0; +err_init_rx_buffers: + while (--i >= 0) + stmmac_free_rx_buffers(priv, i); + return ret; } static void dma_free_rx_skbufs(struct stmmac_priv *priv) { int i; - for (i = 0; i < priv->dma_rx_size; i++) { - if (priv->rx_skbuff[i]) { - dma_unmap_single(priv->device, priv->rx_skbuff_dma[i], - priv->dma_buf_sz, DMA_FROM_DEVICE); - dev_kfree_skb_any(priv->rx_skbuff[i]); - } - priv->rx_skbuff[i] = NULL; - } + for (i = 0; i < priv->dma_rx_size; i++) + stmmac_free_rx_buffers(priv, i); } static void dma_free_tx_skbufs(struct stmmac_priv *priv) @@ -523,47 +1093,146 @@ static void dma_free_tx_skbufs(struct stmmac_priv *priv) int i; for (i = 0; i < priv->dma_tx_size; i++) { + struct dma_desc *p; + + if (priv->extend_desc) + p = &((priv->dma_etx + i)->basic); + else + p = priv->dma_tx + i; + + if (priv->tx_skbuff_dma[i]) { + dma_unmap_single(priv->device, + priv->tx_skbuff_dma[i], + priv->hw->desc->get_tx_len(p), + DMA_TO_DEVICE); + priv->tx_skbuff_dma[i] = 0; + } + if (priv->tx_skbuff[i] != NULL) { - struct dma_desc *p = priv->dma_tx + i; - if (p->des2) - dma_unmap_single(priv->device, p->des2, - priv->hw->desc->get_tx_len(p), - DMA_TO_DEVICE); dev_kfree_skb_any(priv->tx_skbuff[i]); priv->tx_skbuff[i] = NULL; } } } +static int alloc_dma_desc_resources(struct stmmac_priv *priv) +{ + unsigned int txsize = priv->dma_tx_size; + unsigned int rxsize = priv->dma_rx_size; + int ret = -ENOMEM; + + priv->rx_skbuff_dma = kmalloc_array(rxsize, sizeof(dma_addr_t), + GFP_KERNEL); + if (!priv->rx_skbuff_dma) + return -ENOMEM; + + priv->rx_skbuff = kmalloc_array(rxsize, sizeof(struct sk_buff *), + GFP_KERNEL); + if (!priv->rx_skbuff) + goto err_rx_skbuff; + + priv->tx_skbuff_dma = kmalloc_array(txsize, sizeof(dma_addr_t), + GFP_KERNEL); + if (!priv->tx_skbuff_dma) + goto err_tx_skbuff_dma; + + priv->tx_skbuff = kmalloc_array(txsize, sizeof(struct sk_buff *), + GFP_KERNEL); + if (!priv->tx_skbuff) + goto err_tx_skbuff; + + if (priv->extend_desc) { + priv->dma_erx = dma_alloc_coherent(priv->device, rxsize * + sizeof(struct + dma_extended_desc), + &priv->dma_rx_phy, + GFP_KERNEL); + if (!priv->dma_erx) + goto err_dma; + + priv->dma_etx = dma_alloc_coherent(priv->device, txsize * + sizeof(struct + dma_extended_desc), + &priv->dma_tx_phy, + GFP_KERNEL); + if (!priv->dma_etx) { + dma_free_coherent(priv->device, priv->dma_rx_size * + sizeof(struct dma_extended_desc), + priv->dma_erx, priv->dma_rx_phy); + goto err_dma; + } + } else { + priv->dma_rx = dma_alloc_coherent(priv->device, rxsize * + sizeof(struct dma_desc), + &priv->dma_rx_phy, + GFP_KERNEL); + if (!priv->dma_rx) + goto err_dma; + + priv->dma_tx = dma_alloc_coherent(priv->device, txsize * + sizeof(struct dma_desc), + &priv->dma_tx_phy, + GFP_KERNEL); + if (!priv->dma_tx) { + dma_free_coherent(priv->device, priv->dma_rx_size * + sizeof(struct dma_desc), + priv->dma_rx, priv->dma_rx_phy); + goto err_dma; + } + } + + return 0; + +err_dma: + kfree(priv->tx_skbuff); +err_tx_skbuff: + kfree(priv->tx_skbuff_dma); +err_tx_skbuff_dma: + kfree(priv->rx_skbuff); +err_rx_skbuff: + kfree(priv->rx_skbuff_dma); + return ret; +} + static void free_dma_desc_resources(struct stmmac_priv *priv) { /* Release the DMA TX/RX socket buffers */ dma_free_rx_skbufs(priv); dma_free_tx_skbufs(priv); - /* Free the region of consistent memory previously allocated for - * the DMA */ - dma_free_coherent(priv->device, - priv->dma_tx_size * sizeof(struct dma_desc), - priv->dma_tx, priv->dma_tx_phy); - dma_free_coherent(priv->device, - priv->dma_rx_size * sizeof(struct dma_desc), - priv->dma_rx, priv->dma_rx_phy); + /* Free DMA regions of consistent memory previously allocated */ + if (!priv->extend_desc) { + dma_free_coherent(priv->device, + priv->dma_tx_size * sizeof(struct dma_desc), + priv->dma_tx, priv->dma_tx_phy); + dma_free_coherent(priv->device, + priv->dma_rx_size * sizeof(struct dma_desc), + priv->dma_rx, priv->dma_rx_phy); + } else { + dma_free_coherent(priv->device, priv->dma_tx_size * + sizeof(struct dma_extended_desc), + priv->dma_etx, priv->dma_tx_phy); + dma_free_coherent(priv->device, priv->dma_rx_size * + sizeof(struct dma_extended_desc), + priv->dma_erx, priv->dma_rx_phy); + } kfree(priv->rx_skbuff_dma); kfree(priv->rx_skbuff); + kfree(priv->tx_skbuff_dma); kfree(priv->tx_skbuff); } /** * stmmac_dma_operation_mode - HW DMA operation mode - * @priv : pointer to the private device structure. + * @priv: driver private structure * Description: it sets the DMA operation mode: tx/rx DMA thresholds * or Store-And-Forward capability. */ static void stmmac_dma_operation_mode(struct stmmac_priv *priv) { - if (likely(priv->plat->force_sf_dma_mode || - ((priv->plat->tx_coe) && (!priv->no_csum_insertion)))) { + if (priv->plat->force_thresh_dma_mode) + priv->hw->dma->dma_mode(priv->ioaddr, tc, tc); + else if (priv->plat->force_sf_dma_mode || priv->plat->tx_coe) { /* * In case of GMAC, SF mode can be enabled * to perform the TX COE in HW. This depends on: @@ -571,166 +1240,129 @@ static void stmmac_dma_operation_mode(struct stmmac_priv *priv) * 2) There is no bugged Jumbo frame support * that needs to not insert csum in the TDES. */ - priv->hw->dma->dma_mode(priv->ioaddr, - SF_DMA_MODE, SF_DMA_MODE); + priv->hw->dma->dma_mode(priv->ioaddr, SF_DMA_MODE, SF_DMA_MODE); tc = SF_DMA_MODE; } else priv->hw->dma->dma_mode(priv->ioaddr, tc, SF_DMA_MODE); } /** - * stmmac_tx: - * @priv: private driver structure + * stmmac_tx_clean: + * @priv: driver private structure * Description: it reclaims resources after transmission completes. */ -static void stmmac_tx(struct stmmac_priv *priv) +static void stmmac_tx_clean(struct stmmac_priv *priv) { unsigned int txsize = priv->dma_tx_size; spin_lock(&priv->tx_lock); + priv->xstats.tx_clean++; + while (priv->dirty_tx != priv->cur_tx) { int last; unsigned int entry = priv->dirty_tx % txsize; struct sk_buff *skb = priv->tx_skbuff[entry]; - struct dma_desc *p = priv->dma_tx + entry; + struct dma_desc *p; + + if (priv->extend_desc) + p = (struct dma_desc *)(priv->dma_etx + entry); + else + p = priv->dma_tx + entry; /* Check if the descriptor is owned by the DMA. */ if (priv->hw->desc->get_tx_owner(p)) break; - /* Verify tx error by looking at the last segment */ + /* Verify tx error by looking at the last segment. */ last = priv->hw->desc->get_tx_ls(p); if (likely(last)) { int tx_error = - priv->hw->desc->tx_status(&priv->dev->stats, - &priv->xstats, p, - priv->ioaddr); + priv->hw->desc->tx_status(&priv->dev->stats, + &priv->xstats, p, + priv->ioaddr); if (likely(tx_error == 0)) { priv->dev->stats.tx_packets++; priv->xstats.tx_pkt_n++; } else priv->dev->stats.tx_errors++; + + stmmac_get_tx_hwtstamp(priv, entry, skb); } - TX_DBG("%s: curr %d, dirty %d\n", __func__, - priv->cur_tx, priv->dirty_tx); + if (netif_msg_tx_done(priv)) + pr_debug("%s: curr %d, dirty %d\n", __func__, + priv->cur_tx, priv->dirty_tx); - if (likely(p->des2)) - dma_unmap_single(priv->device, p->des2, + if (likely(priv->tx_skbuff_dma[entry])) { + dma_unmap_single(priv->device, + priv->tx_skbuff_dma[entry], priv->hw->desc->get_tx_len(p), DMA_TO_DEVICE); - priv->hw->ring->clean_desc3(p); + priv->tx_skbuff_dma[entry] = 0; + } + priv->hw->mode->clean_desc3(priv, p); if (likely(skb != NULL)) { - /* - * If there's room in the queue (limit it to size) - * we add this skb back into the pool, - * if it's the right size. - */ - if ((skb_queue_len(&priv->rx_recycle) < - priv->dma_rx_size) && - skb_recycle_check(skb, priv->dma_buf_sz)) - __skb_queue_head(&priv->rx_recycle, skb); - else - dev_kfree_skb(skb); - + dev_consume_skb_any(skb); priv->tx_skbuff[entry] = NULL; } - priv->hw->desc->release_tx_desc(p); + priv->hw->desc->release_tx_desc(p, priv->mode); - entry = (++priv->dirty_tx) % txsize; + priv->dirty_tx++; } if (unlikely(netif_queue_stopped(priv->dev) && stmmac_tx_avail(priv) > STMMAC_TX_THRESH(priv))) { netif_tx_lock(priv->dev); if (netif_queue_stopped(priv->dev) && - stmmac_tx_avail(priv) > STMMAC_TX_THRESH(priv)) { - TX_DBG("%s: restart transmit\n", __func__); + stmmac_tx_avail(priv) > STMMAC_TX_THRESH(priv)) { + if (netif_msg_tx_done(priv)) + pr_debug("%s: restart transmit\n", __func__); netif_wake_queue(priv->dev); } netif_tx_unlock(priv->dev); } - spin_unlock(&priv->tx_lock); -} - -static inline void stmmac_enable_irq(struct stmmac_priv *priv) -{ -#ifdef CONFIG_STMMAC_TIMER - if (likely(priv->tm->enable)) - priv->tm->timer_start(tmrate); - else -#endif - priv->hw->dma->enable_dma_irq(priv->ioaddr); -} - -static inline void stmmac_disable_irq(struct stmmac_priv *priv) -{ -#ifdef CONFIG_STMMAC_TIMER - if (likely(priv->tm->enable)) - priv->tm->timer_stop(); - else -#endif - priv->hw->dma->disable_dma_irq(priv->ioaddr); -} - -static int stmmac_has_work(struct stmmac_priv *priv) -{ - unsigned int has_work = 0; - int rxret, tx_work = 0; - - rxret = priv->hw->desc->get_rx_owner(priv->dma_rx + - (priv->cur_rx % priv->dma_rx_size)); - - if (priv->dirty_tx != priv->cur_tx) - tx_work = 1; - if (likely(!rxret || tx_work)) - has_work = 1; - - return has_work; + if ((priv->eee_enabled) && (!priv->tx_path_in_lpi_mode)) { + stmmac_enable_eee_mode(priv); + mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_T(eee_timer)); + } + spin_unlock(&priv->tx_lock); } -static inline void _stmmac_schedule(struct stmmac_priv *priv) +static inline void stmmac_enable_dma_irq(struct stmmac_priv *priv) { - if (likely(stmmac_has_work(priv))) { - stmmac_disable_irq(priv); - napi_schedule(&priv->napi); - } + priv->hw->dma->enable_dma_irq(priv->ioaddr); } -#ifdef CONFIG_STMMAC_TIMER -void stmmac_schedule(struct net_device *dev) +static inline void stmmac_disable_dma_irq(struct stmmac_priv *priv) { - struct stmmac_priv *priv = netdev_priv(dev); - - priv->xstats.sched_timer_n++; - - _stmmac_schedule(priv); + priv->hw->dma->disable_dma_irq(priv->ioaddr); } -static void stmmac_no_timer_started(unsigned int x) -{; -}; - -static void stmmac_no_timer_stopped(void) -{; -}; -#endif - /** - * stmmac_tx_err: - * @priv: pointer to the private device structure + * stmmac_tx_err: irq tx error mng function + * @priv: driver private structure * Description: it cleans the descriptors and restarts the transmission * in case of errors. */ static void stmmac_tx_err(struct stmmac_priv *priv) { + int i; + int txsize = priv->dma_tx_size; netif_stop_queue(priv->dev); priv->hw->dma->stop_tx(priv->ioaddr); dma_free_tx_skbufs(priv); - priv->hw->desc->init_tx_desc(priv->dma_tx, priv->dma_tx_size); + for (i = 0; i < txsize; i++) + if (priv->extend_desc) + priv->hw->desc->init_tx_desc(&priv->dma_etx[i].basic, + priv->mode, + (i == txsize - 1)); + else + priv->hw->desc->init_tx_desc(&priv->dma_tx[i], + priv->mode, + (i == txsize - 1)); priv->dirty_tx = 0; priv->cur_tx = 0; priv->hw->dma->start_tx(priv->ioaddr); @@ -739,16 +1371,26 @@ static void stmmac_tx_err(struct stmmac_priv *priv) netif_wake_queue(priv->dev); } - +/** + * stmmac_dma_interrupt: DMA ISR + * @priv: driver private structure + * Description: this is the DMA ISR. It is called by the main ISR. + * It calls the dwmac dma routine to understand which type of interrupt + * happened. In case of there is a Normal interrupt and either TX or RX + * interrupt happened so the NAPI is scheduled. + */ static void stmmac_dma_interrupt(struct stmmac_priv *priv) { int status; status = priv->hw->dma->dma_interrupt(priv->ioaddr, &priv->xstats); - if (likely(status == handle_tx_rx)) - _stmmac_schedule(priv); - - else if (unlikely(status == tx_hard_error_bump_tc)) { + if (likely((status & handle_rx)) || (status & handle_tx)) { + if (likely(napi_schedule_prep(&priv->napi))) { + stmmac_disable_dma_irq(priv); + __napi_schedule(&priv->napi); + } + } + if (unlikely(status & tx_hard_error_bump_tc)) { /* Try to bump up the dma threshold on this failure */ if (unlikely(tc != SF_DMA_MODE) && (tc <= 256)) { tc += 64; @@ -759,13 +1401,16 @@ static void stmmac_dma_interrupt(struct stmmac_priv *priv) stmmac_tx_err(priv); } +/** + * stmmac_mmc_setup: setup the Mac Management Counters (MMC) + * @priv: driver private structure + * Description: this masks the MMC irq, in fact, the counters are managed in SW. + */ static void stmmac_mmc_setup(struct stmmac_priv *priv) { unsigned int mode = MMC_CNTRL_RESET_ON_READ | MMC_CNTRL_COUNTER_RESET | - MMC_CNTRL_PRESET | MMC_CNTRL_FULL_HALF_PRESET; + MMC_CNTRL_PRESET | MMC_CNTRL_FULL_HALF_PRESET; - /* Mask MMC irq, counters are managed in SW and registers - * are cleared on each READ eventually. */ dwmac_mmc_intr_all_mask(priv->ioaddr); if (priv->dma_cap.rmon) { @@ -779,8 +1424,7 @@ static u32 stmmac_get_synopsys_id(struct stmmac_priv *priv) { u32 hwid = priv->hw->synopsys_uid; - /* Only check valid Synopsys Id because old MAC chips - * have no HW registers where get the ID */ + /* Check Synopsys Id (not available on old chips) */ if (likely(hwid)) { u32 uid = ((hwid & 0x0000ff00) >> 8); u32 synid = (hwid & 0x000000ff); @@ -794,13 +1438,24 @@ static u32 stmmac_get_synopsys_id(struct stmmac_priv *priv) } /** - * stmmac_selec_desc_mode - * @dev : device pointer - * Description: select the Enhanced/Alternate or Normal descriptors */ + * stmmac_selec_desc_mode: to select among: normal/alternate/extend descriptors + * @priv: driver private structure + * Description: select the Enhanced/Alternate or Normal descriptors. + * In case of Enhanced/Alternate, it looks at the extended descriptors are + * supported by the HW cap. register. + */ static void stmmac_selec_desc_mode(struct stmmac_priv *priv) { if (priv->plat->enh_desc) { pr_info(" Enhanced/Alternate descriptors\n"); + + /* GMAC older than 3.50 has no extended descriptors */ + if (priv->synopsys_id >= DWMAC_CORE_3_50) { + pr_info("\tEnabled extended descriptors\n"); + priv->extend_desc = 1; + } else + pr_warn("Extended descriptors not supported\n"); + priv->hw->desc = &enh_desc_ops; } else { pr_info(" Normal descriptors\n"); @@ -809,8 +1464,8 @@ static void stmmac_selec_desc_mode(struct stmmac_priv *priv) } /** - * stmmac_get_hw_features - * @priv : private device pointer + * stmmac_get_hw_features: get MAC capabilities from the HW cap. register. + * @priv: driver private structure * Description: * new GMAC chip generations have a new register to indicate the * presence of the optional feature/functions. @@ -828,122 +1483,149 @@ static int stmmac_get_hw_features(struct stmmac_priv *priv) priv->dma_cap.mbps_1000 = (hw_cap & DMA_HW_FEAT_GMIISEL) >> 1; priv->dma_cap.half_duplex = (hw_cap & DMA_HW_FEAT_HDSEL) >> 2; priv->dma_cap.hash_filter = (hw_cap & DMA_HW_FEAT_HASHSEL) >> 4; - priv->dma_cap.multi_addr = - (hw_cap & DMA_HW_FEAT_ADDMACADRSEL) >> 5; + priv->dma_cap.multi_addr = (hw_cap & DMA_HW_FEAT_ADDMAC) >> 5; priv->dma_cap.pcs = (hw_cap & DMA_HW_FEAT_PCSSEL) >> 6; priv->dma_cap.sma_mdio = (hw_cap & DMA_HW_FEAT_SMASEL) >> 8; priv->dma_cap.pmt_remote_wake_up = - (hw_cap & DMA_HW_FEAT_RWKSEL) >> 9; + (hw_cap & DMA_HW_FEAT_RWKSEL) >> 9; priv->dma_cap.pmt_magic_frame = - (hw_cap & DMA_HW_FEAT_MGKSEL) >> 10; + (hw_cap & DMA_HW_FEAT_MGKSEL) >> 10; /* MMC */ priv->dma_cap.rmon = (hw_cap & DMA_HW_FEAT_MMCSEL) >> 11; - /* IEEE 1588-2002*/ + /* IEEE 1588-2002 */ priv->dma_cap.time_stamp = - (hw_cap & DMA_HW_FEAT_TSVER1SEL) >> 12; - /* IEEE 1588-2008*/ + (hw_cap & DMA_HW_FEAT_TSVER1SEL) >> 12; + /* IEEE 1588-2008 */ priv->dma_cap.atime_stamp = - (hw_cap & DMA_HW_FEAT_TSVER2SEL) >> 13; + (hw_cap & DMA_HW_FEAT_TSVER2SEL) >> 13; /* 802.3az - Energy-Efficient Ethernet (EEE) */ priv->dma_cap.eee = (hw_cap & DMA_HW_FEAT_EEESEL) >> 14; priv->dma_cap.av = (hw_cap & DMA_HW_FEAT_AVSEL) >> 15; /* TX and RX csum */ priv->dma_cap.tx_coe = (hw_cap & DMA_HW_FEAT_TXCOESEL) >> 16; priv->dma_cap.rx_coe_type1 = - (hw_cap & DMA_HW_FEAT_RXTYP1COE) >> 17; + (hw_cap & DMA_HW_FEAT_RXTYP1COE) >> 17; priv->dma_cap.rx_coe_type2 = - (hw_cap & DMA_HW_FEAT_RXTYP2COE) >> 18; + (hw_cap & DMA_HW_FEAT_RXTYP2COE) >> 18; priv->dma_cap.rxfifo_over_2048 = - (hw_cap & DMA_HW_FEAT_RXFIFOSIZE) >> 19; + (hw_cap & DMA_HW_FEAT_RXFIFOSIZE) >> 19; /* TX and RX number of channels */ priv->dma_cap.number_rx_channel = - (hw_cap & DMA_HW_FEAT_RXCHCNT) >> 20; + (hw_cap & DMA_HW_FEAT_RXCHCNT) >> 20; priv->dma_cap.number_tx_channel = - (hw_cap & DMA_HW_FEAT_TXCHCNT) >> 22; - /* Alternate (enhanced) DESC mode*/ - priv->dma_cap.enh_desc = - (hw_cap & DMA_HW_FEAT_ENHDESSEL) >> 24; - + (hw_cap & DMA_HW_FEAT_TXCHCNT) >> 22; + /* Alternate (enhanced) DESC mode */ + priv->dma_cap.enh_desc = (hw_cap & DMA_HW_FEAT_ENHDESSEL) >> 24; } return hw_cap; } +/** + * stmmac_check_ether_addr: check if the MAC addr is valid + * @priv: driver private structure + * Description: + * it is to verify if the MAC address is valid, in case of failures it + * generates a random MAC address + */ static void stmmac_check_ether_addr(struct stmmac_priv *priv) { - /* verify if the MAC address is valid, in case of failures it - * generates a random MAC address */ if (!is_valid_ether_addr(priv->dev->dev_addr)) { priv->hw->mac->get_umac_addr((void __iomem *) priv->dev->base_addr, priv->dev->dev_addr, 0); - if (!is_valid_ether_addr(priv->dev->dev_addr)) - random_ether_addr(priv->dev->dev_addr); + if (!is_valid_ether_addr(priv->dev->dev_addr)) + eth_hw_addr_random(priv->dev); + pr_info("%s: device MAC address %pM\n", priv->dev->name, + priv->dev->dev_addr); } - pr_warning("%s: device MAC address %pM\n", priv->dev->name, - priv->dev->dev_addr); } /** - * stmmac_open - open entry point of the driver + * stmmac_init_dma_engine: DMA init. + * @priv: driver private structure + * Description: + * It inits the DMA invoking the specific MAC/GMAC callback. + * Some DMA parameters can be passed from the platform; + * in case of these are not passed a default is kept for the MAC or GMAC. + */ +static int stmmac_init_dma_engine(struct stmmac_priv *priv) +{ + int pbl = DEFAULT_DMA_PBL, fixed_burst = 0, burst_len = 0; + int mixed_burst = 0; + int atds = 0; + + if (priv->plat->dma_cfg) { + pbl = priv->plat->dma_cfg->pbl; + fixed_burst = priv->plat->dma_cfg->fixed_burst; + mixed_burst = priv->plat->dma_cfg->mixed_burst; + burst_len = priv->plat->dma_cfg->burst_len; + } + + if (priv->extend_desc && (priv->mode == STMMAC_RING_MODE)) + atds = 1; + + return priv->hw->dma->init(priv->ioaddr, pbl, fixed_burst, mixed_burst, + burst_len, priv->dma_tx_phy, + priv->dma_rx_phy, atds); +} + +/** + * stmmac_tx_timer: mitigation sw timer for tx. + * @data: data pointer + * Description: + * This is the timer handler to directly invoke the stmmac_tx_clean. + */ +static void stmmac_tx_timer(unsigned long data) +{ + struct stmmac_priv *priv = (struct stmmac_priv *)data; + + stmmac_tx_clean(priv); +} + +/** + * stmmac_init_tx_coalesce: init tx mitigation options. + * @priv: driver private structure + * Description: + * This inits the transmit coalesce parameters: i.e. timer rate, + * timer handler and default threshold used for enabling the + * interrupt on completion bit. + */ +static void stmmac_init_tx_coalesce(struct stmmac_priv *priv) +{ + priv->tx_coal_frames = STMMAC_TX_FRAMES; + priv->tx_coal_timer = STMMAC_COAL_TX_TIMER; + init_timer(&priv->txtimer); + priv->txtimer.expires = STMMAC_COAL_TIMER(priv->tx_coal_timer); + priv->txtimer.data = (unsigned long)priv; + priv->txtimer.function = stmmac_tx_timer; + add_timer(&priv->txtimer); +} + +/** + * stmmac_hw_setup: setup mac in a usable state. * @dev : pointer to the device structure. * Description: - * This function is the open entry point of the driver. + * This function sets up the ip in a usable state. * Return value: * 0 on success and an appropriate (-)ve integer as defined in errno.h * file on failure. */ -static int stmmac_open(struct net_device *dev) +static int stmmac_hw_setup(struct net_device *dev) { struct stmmac_priv *priv = netdev_priv(dev); int ret; - stmmac_check_ether_addr(priv); - - /* MDIO bus Registration */ - ret = stmmac_mdio_register(dev); + ret = init_dma_desc_rings(dev); if (ret < 0) { - pr_debug("%s: MDIO bus (id: %d) registration failed", - __func__, priv->plat->bus_id); + pr_err("%s: DMA descriptors initialization failed\n", __func__); return ret; } - -#ifdef CONFIG_STMMAC_TIMER - priv->tm = kzalloc(sizeof(struct stmmac_timer *), GFP_KERNEL); - if (unlikely(priv->tm == NULL)) { - pr_err("%s: ERROR: timer memory alloc failed\n", __func__); - return -ENOMEM; - } - priv->tm->freq = tmrate; - - /* Test if the external timer can be actually used. - * In case of failure continue without timer. */ - if (unlikely((stmmac_open_ext_timer(dev, priv->tm)) < 0)) { - pr_warning("stmmaceth: cannot attach the external timer.\n"); - priv->tm->freq = 0; - priv->tm->timer_start = stmmac_no_timer_started; - priv->tm->timer_stop = stmmac_no_timer_stopped; - } else - priv->tm->enable = 1; -#endif - ret = stmmac_init_phy(dev); - if (unlikely(ret)) { - pr_err("%s: Cannot attach to PHY (error: %d)\n", __func__, ret); - goto open_error; - } - - /* Create and initialize the TX/RX descriptors chains. */ - priv->dma_tx_size = STMMAC_ALIGN(dma_txsize); - priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize); - priv->dma_buf_sz = STMMAC_ALIGN(buf_sz); - init_dma_desc_rings(dev); - /* DMA initialization and SW reset */ - ret = priv->hw->dma->init(priv->ioaddr, priv->plat->pbl, - priv->dma_tx_phy, priv->dma_rx_phy); + ret = stmmac_init_dma_engine(priv); if (ret < 0) { - pr_err("%s: DMA initialization failed\n", __func__); - goto open_error; + pr_err("%s: DMA engine initialization failed\n", __func__); + return ret; } /* Copy the MAC addr into the HW */ @@ -954,27 +1636,7 @@ static int stmmac_open(struct net_device *dev) priv->plat->bus_setup(priv->ioaddr); /* Initialize the MAC Core */ - priv->hw->mac->core_init(priv->ioaddr); - - /* Request the IRQ lines */ - ret = request_irq(dev->irq, stmmac_interrupt, - IRQF_SHARED, dev->name, dev); - if (unlikely(ret < 0)) { - pr_err("%s: ERROR: allocating the IRQ %d (error: %d)\n", - __func__, dev->irq, ret); - goto open_error; - } - - /* Request the Wake IRQ in case of another line is used for WoL */ - if (priv->wol_irq != dev->irq) { - ret = request_irq(priv->wol_irq, stmmac_interrupt, - IRQF_SHARED, dev->name, dev); - if (unlikely(ret < 0)) { - pr_err("%s: ERROR: allocating the ext WoL IRQ %d " - "(error: %d)\n", __func__, priv->wol_irq, ret); - goto open_error_wolirq; - } - } + priv->hw->mac->core_init(priv->ioaddr, dev->mtu); /* Enable the MAC Rx/Tx */ stmmac_set_mac(priv->ioaddr, true); @@ -982,48 +1644,139 @@ static int stmmac_open(struct net_device *dev) /* Set the HW DMA mode and the COE */ stmmac_dma_operation_mode(priv); - /* Extra statistics */ - memset(&priv->xstats, 0, sizeof(struct stmmac_extra_stats)); - priv->xstats.threshold = tc; - stmmac_mmc_setup(priv); + ret = stmmac_init_ptp(priv); + if (ret && ret != -EOPNOTSUPP) + pr_warn("%s: failed PTP initialisation\n", __func__); + #ifdef CONFIG_STMMAC_DEBUG_FS ret = stmmac_init_fs(dev); if (ret < 0) - pr_warning("%s: failed debugFS registration\n", __func__); + pr_warn("%s: failed debugFS registration\n", __func__); #endif /* Start the ball rolling... */ - DBG(probe, DEBUG, "%s: DMA RX/TX processes started...\n", dev->name); + pr_debug("%s: DMA RX/TX processes started...\n", dev->name); priv->hw->dma->start_tx(priv->ioaddr); priv->hw->dma->start_rx(priv->ioaddr); -#ifdef CONFIG_STMMAC_TIMER - priv->tm->timer_start(tmrate); -#endif - /* Dump DMA/MAC registers */ if (netif_msg_hw(priv)) { priv->hw->mac->dump_regs(priv->ioaddr); priv->hw->dma->dump_regs(priv->ioaddr); } + priv->tx_lpi_timer = STMMAC_DEFAULT_TWT_LS; + + priv->eee_enabled = stmmac_eee_init(priv); + + stmmac_init_tx_coalesce(priv); + + if ((priv->use_riwt) && (priv->hw->dma->rx_watchdog)) { + priv->rx_riwt = MAX_DMA_RIWT; + priv->hw->dma->rx_watchdog(priv->ioaddr, MAX_DMA_RIWT); + } + + if (priv->pcs && priv->hw->mac->ctrl_ane) + priv->hw->mac->ctrl_ane(priv->ioaddr, 0); + + return 0; +} + +/** + * stmmac_open - open entry point of the driver + * @dev : pointer to the device structure. + * Description: + * This function is the open entry point of the driver. + * Return value: + * 0 on success and an appropriate (-)ve integer as defined in errno.h + * file on failure. + */ +static int stmmac_open(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + int ret; + + stmmac_check_ether_addr(priv); + + if (priv->pcs != STMMAC_PCS_RGMII && priv->pcs != STMMAC_PCS_TBI && + priv->pcs != STMMAC_PCS_RTBI) { + ret = stmmac_init_phy(dev); + if (ret) { + pr_err("%s: Cannot attach to PHY (error: %d)\n", + __func__, ret); + return ret; + } + } + + /* Extra statistics */ + memset(&priv->xstats, 0, sizeof(struct stmmac_extra_stats)); + priv->xstats.threshold = tc; + + /* Create and initialize the TX/RX descriptors chains. */ + priv->dma_tx_size = STMMAC_ALIGN(dma_txsize); + priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize); + priv->dma_buf_sz = STMMAC_ALIGN(buf_sz); + + ret = alloc_dma_desc_resources(priv); + if (ret < 0) { + pr_err("%s: DMA descriptors allocation failed\n", __func__); + goto dma_desc_error; + } + + ret = stmmac_hw_setup(dev); + if (ret < 0) { + pr_err("%s: Hw setup failed\n", __func__); + goto init_error; + } if (priv->phydev) phy_start(priv->phydev); + /* Request the IRQ lines */ + ret = request_irq(dev->irq, stmmac_interrupt, + IRQF_SHARED, dev->name, dev); + if (unlikely(ret < 0)) { + pr_err("%s: ERROR: allocating the IRQ %d (error: %d)\n", + __func__, dev->irq, ret); + goto init_error; + } + + /* Request the Wake IRQ in case of another line is used for WoL */ + if (priv->wol_irq != dev->irq) { + ret = request_irq(priv->wol_irq, stmmac_interrupt, + IRQF_SHARED, dev->name, dev); + if (unlikely(ret < 0)) { + pr_err("%s: ERROR: allocating the WoL IRQ %d (%d)\n", + __func__, priv->wol_irq, ret); + goto wolirq_error; + } + } + + /* Request the IRQ lines */ + if (priv->lpi_irq > 0) { + ret = request_irq(priv->lpi_irq, stmmac_interrupt, IRQF_SHARED, + dev->name, dev); + if (unlikely(ret < 0)) { + pr_err("%s: ERROR: allocating the LPI IRQ %d (%d)\n", + __func__, priv->lpi_irq, ret); + goto lpiirq_error; + } + } + napi_enable(&priv->napi); - skb_queue_head_init(&priv->rx_recycle); netif_start_queue(dev); return 0; -open_error_wolirq: +lpiirq_error: + if (priv->wol_irq != dev->irq) + free_irq(priv->wol_irq, dev); +wolirq_error: free_irq(dev->irq, dev); -open_error: -#ifdef CONFIG_STMMAC_TIMER - kfree(priv->tm); -#endif +init_error: + free_dma_desc_resources(priv); +dma_desc_error: if (priv->phydev) phy_disconnect(priv->phydev); @@ -1040,6 +1793,9 @@ static int stmmac_release(struct net_device *dev) { struct stmmac_priv *priv = netdev_priv(dev); + if (priv->eee_enabled) + del_timer_sync(&priv->eee_ctrl_timer); + /* Stop and disconnect the PHY */ if (priv->phydev) { phy_stop(priv->phydev); @@ -1049,19 +1805,16 @@ static int stmmac_release(struct net_device *dev) netif_stop_queue(dev); -#ifdef CONFIG_STMMAC_TIMER - /* Stop and release the timer */ - stmmac_close_ext_timer(); - if (priv->tm != NULL) - kfree(priv->tm); -#endif napi_disable(&priv->napi); - skb_queue_purge(&priv->rx_recycle); + + del_timer_sync(&priv->txtimer); /* Free the IRQ lines */ free_irq(dev->irq, dev); if (priv->wol_irq != dev->irq) free_irq(priv->wol_irq, dev); + if (priv->lpi_irq > 0) + free_irq(priv->lpi_irq, dev); /* Stop TX/RX DMA and clear the descriptors */ priv->hw->dma->stop_tx(priv->ioaddr); @@ -1078,124 +1831,147 @@ static int stmmac_release(struct net_device *dev) #ifdef CONFIG_STMMAC_DEBUG_FS stmmac_exit_fs(); #endif - stmmac_mdio_unregister(dev); + + stmmac_release_ptp(priv); return 0; } /** - * stmmac_xmit: + * stmmac_xmit: Tx entry point of the driver * @skb : the socket buffer * @dev : device pointer - * Description : Tx entry point of the driver. + * Description : this is the tx entry point of the driver. + * It programs the chain or the ring and supports oversized frames + * and SG feature. */ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) { struct stmmac_priv *priv = netdev_priv(dev); unsigned int txsize = priv->dma_tx_size; unsigned int entry; - int i, csum_insertion = 0; + int i, csum_insertion = 0, is_jumbo = 0; int nfrags = skb_shinfo(skb)->nr_frags; struct dma_desc *desc, *first; unsigned int nopaged_len = skb_headlen(skb); + unsigned int enh_desc = priv->plat->enh_desc; if (unlikely(stmmac_tx_avail(priv) < nfrags + 1)) { if (!netif_queue_stopped(dev)) { netif_stop_queue(dev); /* This is a hard error, log it. */ - pr_err("%s: BUG! Tx Ring full when queue awake\n", - __func__); + pr_err("%s: Tx Ring full when queue awake\n", __func__); } return NETDEV_TX_BUSY; } spin_lock(&priv->tx_lock); - entry = priv->cur_tx % txsize; + if (priv->tx_path_in_lpi_mode) + stmmac_disable_eee_mode(priv); -#ifdef STMMAC_XMIT_DEBUG - if ((skb->len > ETH_FRAME_LEN) || nfrags) - pr_info("stmmac xmit:\n" - "\tskb addr %p - len: %d - nopaged_len: %d\n" - "\tn_frags: %d - ip_summed: %d - %s gso\n", - skb, skb->len, nopaged_len, nfrags, skb->ip_summed, - !skb_is_gso(skb) ? "isn't" : "is"); -#endif + entry = priv->cur_tx % txsize; csum_insertion = (skb->ip_summed == CHECKSUM_PARTIAL); - desc = priv->dma_tx + entry; + if (priv->extend_desc) + desc = (struct dma_desc *)(priv->dma_etx + entry); + else + desc = priv->dma_tx + entry; + first = desc; -#ifdef STMMAC_XMIT_DEBUG - if ((nfrags > 0) || (skb->len > ETH_FRAME_LEN)) - pr_debug("stmmac xmit: skb len: %d, nopaged_len: %d,\n" - "\t\tn_frags: %d, ip_summed: %d\n", - skb->len, nopaged_len, nfrags, skb->ip_summed); -#endif - priv->tx_skbuff[entry] = skb; + /* To program the descriptors according to the size of the frame */ + if (enh_desc) + is_jumbo = priv->hw->mode->is_jumbo_frm(skb->len, enh_desc); - if (priv->hw->ring->is_jumbo_frm(skb->len, priv->plat->enh_desc)) { - entry = priv->hw->ring->jumbo_frm(priv, skb, csum_insertion); - desc = priv->dma_tx + entry; - } else { + if (likely(!is_jumbo)) { desc->des2 = dma_map_single(priv->device, skb->data, - nopaged_len, DMA_TO_DEVICE); + nopaged_len, DMA_TO_DEVICE); + priv->tx_skbuff_dma[entry] = desc->des2; priv->hw->desc->prepare_tx_desc(desc, 1, nopaged_len, - csum_insertion); + csum_insertion, priv->mode); + } else { + desc = first; + entry = priv->hw->mode->jumbo_frm(priv, skb, csum_insertion); } for (i = 0; i < nfrags; i++) { const skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; int len = skb_frag_size(frag); + priv->tx_skbuff[entry] = NULL; entry = (++priv->cur_tx) % txsize; - desc = priv->dma_tx + entry; + if (priv->extend_desc) + desc = (struct dma_desc *)(priv->dma_etx + entry); + else + desc = priv->dma_tx + entry; - TX_DBG("\t[entry %d] segment len: %d\n", entry, len); desc->des2 = skb_frag_dma_map(priv->device, frag, 0, len, DMA_TO_DEVICE); - priv->tx_skbuff[entry] = NULL; - priv->hw->desc->prepare_tx_desc(desc, 0, len, csum_insertion); + priv->tx_skbuff_dma[entry] = desc->des2; + priv->hw->desc->prepare_tx_desc(desc, 0, len, csum_insertion, + priv->mode); wmb(); priv->hw->desc->set_tx_owner(desc); + wmb(); } - /* Interrupt on completition only for the latest segment */ - priv->hw->desc->close_tx_desc(desc); + priv->tx_skbuff[entry] = skb; -#ifdef CONFIG_STMMAC_TIMER - /* Clean IC while using timer */ - if (likely(priv->tm->enable)) - priv->hw->desc->clear_tx_ic(desc); -#endif + /* Finalize the latest segment. */ + priv->hw->desc->close_tx_desc(desc); wmb(); + /* According to the coalesce parameter the IC bit for the latest + * segment could be reset and the timer re-started to invoke the + * stmmac_tx function. This approach takes care about the fragments. + */ + priv->tx_count_frames += nfrags + 1; + if (priv->tx_coal_frames > priv->tx_count_frames) { + priv->hw->desc->clear_tx_ic(desc); + priv->xstats.tx_reset_ic_bit++; + mod_timer(&priv->txtimer, + STMMAC_COAL_TIMER(priv->tx_coal_timer)); + } else + priv->tx_count_frames = 0; /* To avoid raise condition */ priv->hw->desc->set_tx_owner(first); + wmb(); priv->cur_tx++; -#ifdef STMMAC_XMIT_DEBUG if (netif_msg_pktdata(priv)) { - pr_info("stmmac xmit: current=%d, dirty=%d, entry=%d, " - "first=%p, nfrags=%d\n", - (priv->cur_tx % txsize), (priv->dirty_tx % txsize), - entry, first, nfrags); - display_ring(priv->dma_tx, txsize); - pr_info(">>> frame to be transmitted: "); + pr_debug("%s: curr %d dirty=%d entry=%d, first=%p, nfrags=%d", + __func__, (priv->cur_tx % txsize), + (priv->dirty_tx % txsize), entry, first, nfrags); + + if (priv->extend_desc) + stmmac_display_ring((void *)priv->dma_etx, txsize, 1); + else + stmmac_display_ring((void *)priv->dma_tx, txsize, 0); + + pr_debug(">>> frame to be transmitted: "); print_pkt(skb->data, skb->len); } -#endif if (unlikely(stmmac_tx_avail(priv) <= (MAX_SKB_FRAGS + 1))) { - TX_DBG("%s: stop transmitted packets\n", __func__); + if (netif_msg_hw(priv)) + pr_debug("%s: stop transmitted packets\n", __func__); netif_stop_queue(dev); } dev->stats.tx_bytes += skb->len; - skb_tx_timestamp(skb); + if (unlikely((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && + priv->hwts_tx_en)) { + /* declare that device is doing timestamping */ + skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; + priv->hw->desc->enable_tx_timestamp(first); + } + + if (!priv->hwts_tx_en) + skb_tx_timestamp(skb); priv->hw->dma->enable_dma_transmission(priv->ioaddr); @@ -1204,21 +1980,47 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_OK; } +static void stmmac_rx_vlan(struct net_device *dev, struct sk_buff *skb) +{ + struct ethhdr *ehdr; + u16 vlanid; + + if ((dev->features & NETIF_F_HW_VLAN_CTAG_RX) == + NETIF_F_HW_VLAN_CTAG_RX && + !__vlan_get_tag(skb, &vlanid)) { + /* pop the vlan tag */ + ehdr = (struct ethhdr *)skb->data; + memmove(skb->data + VLAN_HLEN, ehdr, ETH_ALEN * 2); + skb_pull(skb, VLAN_HLEN); + __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlanid); + } +} + + +/** + * stmmac_rx_refill: refill used skb preallocated buffers + * @priv: driver private structure + * Description : this is to reallocate the skb for the reception process + * that is based on zero-copy. + */ static inline void stmmac_rx_refill(struct stmmac_priv *priv) { unsigned int rxsize = priv->dma_rx_size; int bfsize = priv->dma_buf_sz; - struct dma_desc *p = priv->dma_rx; for (; priv->cur_rx - priv->dirty_rx > 0; priv->dirty_rx++) { unsigned int entry = priv->dirty_rx % rxsize; + struct dma_desc *p; + + if (priv->extend_desc) + p = (struct dma_desc *)(priv->dma_erx + entry); + else + p = priv->dma_rx + entry; + if (likely(priv->rx_skbuff[entry] == NULL)) { struct sk_buff *skb; - skb = __skb_dequeue(&priv->rx_recycle); - if (skb == NULL) - skb = netdev_alloc_skb_ip_align(priv->dev, - bfsize); + skb = netdev_alloc_skb_ip_align(priv->dev, bfsize); if (unlikely(skb == NULL)) break; @@ -1228,105 +2030,139 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv) dma_map_single(priv->device, skb->data, bfsize, DMA_FROM_DEVICE); - (p + entry)->des2 = priv->rx_skbuff_dma[entry]; + p->des2 = priv->rx_skbuff_dma[entry]; - if (unlikely(priv->plat->has_gmac)) - priv->hw->ring->refill_desc3(bfsize, p + entry); + priv->hw->mode->refill_desc3(priv, p); - RX_DBG(KERN_INFO "\trefill entry #%d\n", entry); + if (netif_msg_rx_status(priv)) + pr_debug("\trefill entry #%d\n", entry); } wmb(); - priv->hw->desc->set_rx_owner(p + entry); + priv->hw->desc->set_rx_owner(p); + wmb(); } } +/** + * stmmac_rx_refill: refill used skb preallocated buffers + * @priv: driver private structure + * @limit: napi bugget. + * Description : this the function called by the napi poll method. + * It gets all the frames inside the ring. + */ static int stmmac_rx(struct stmmac_priv *priv, int limit) { unsigned int rxsize = priv->dma_rx_size; unsigned int entry = priv->cur_rx % rxsize; unsigned int next_entry; unsigned int count = 0; - struct dma_desc *p = priv->dma_rx + entry; - struct dma_desc *p_next; - -#ifdef STMMAC_RX_DEBUG - if (netif_msg_hw(priv)) { - pr_debug(">>> stmmac_rx: descriptor ring:\n"); - display_ring(priv->dma_rx, rxsize); + int coe = priv->plat->rx_coe; + + if (netif_msg_rx_status(priv)) { + pr_debug("%s: descriptor ring:\n", __func__); + if (priv->extend_desc) + stmmac_display_ring((void *)priv->dma_erx, rxsize, 1); + else + stmmac_display_ring((void *)priv->dma_rx, rxsize, 0); } -#endif - count = 0; - while (!priv->hw->desc->get_rx_owner(p)) { + while (count < limit) { int status; + struct dma_desc *p; + + if (priv->extend_desc) + p = (struct dma_desc *)(priv->dma_erx + entry); + else + p = priv->dma_rx + entry; - if (count >= limit) + if (priv->hw->desc->get_rx_owner(p)) break; count++; next_entry = (++priv->cur_rx) % rxsize; - p_next = priv->dma_rx + next_entry; - prefetch(p_next); + if (priv->extend_desc) + prefetch(priv->dma_erx + next_entry); + else + prefetch(priv->dma_rx + next_entry); /* read the status of the incoming frame */ - status = (priv->hw->desc->rx_status(&priv->dev->stats, - &priv->xstats, p)); - if (unlikely(status == discard_frame)) + status = priv->hw->desc->rx_status(&priv->dev->stats, + &priv->xstats, p); + if ((priv->extend_desc) && (priv->hw->desc->rx_extended_status)) + priv->hw->desc->rx_extended_status(&priv->dev->stats, + &priv->xstats, + priv->dma_erx + + entry); + if (unlikely(status == discard_frame)) { priv->dev->stats.rx_errors++; - else { + if (priv->hwts_rx_en && !priv->extend_desc) { + /* DESC2 & DESC3 will be overwitten by device + * with timestamp value, hence reinitialize + * them in stmmac_rx_refill() function so that + * device can reuse it. + */ + priv->rx_skbuff[entry] = NULL; + dma_unmap_single(priv->device, + priv->rx_skbuff_dma[entry], + priv->dma_buf_sz, + DMA_FROM_DEVICE); + } + } else { struct sk_buff *skb; int frame_len; - frame_len = priv->hw->desc->get_rx_frame_len(p); + frame_len = priv->hw->desc->get_rx_frame_len(p, coe); + /* ACS is set; GMAC core strips PAD/FCS for IEEE 802.3 - * Type frames (LLC/LLC-SNAP) */ + * Type frames (LLC/LLC-SNAP) + */ if (unlikely(status != llc_snap)) frame_len -= ETH_FCS_LEN; -#ifdef STMMAC_RX_DEBUG - if (frame_len > ETH_FRAME_LEN) - pr_debug("\tRX frame size %d, COE status: %d\n", - frame_len, status); - if (netif_msg_hw(priv)) + if (netif_msg_rx_status(priv)) { pr_debug("\tdesc: %p [entry %d] buff=0x%x\n", - p, entry, p->des2); -#endif + p, entry, p->des2); + if (frame_len > ETH_FRAME_LEN) + pr_debug("\tframe size %d, COE: %d\n", + frame_len, status); + } skb = priv->rx_skbuff[entry]; if (unlikely(!skb)) { pr_err("%s: Inconsistent Rx descriptor chain\n", - priv->dev->name); + priv->dev->name); priv->dev->stats.rx_dropped++; break; } prefetch(skb->data - NET_IP_ALIGN); priv->rx_skbuff[entry] = NULL; + stmmac_get_rx_hwtstamp(priv, entry, skb); + skb_put(skb, frame_len); dma_unmap_single(priv->device, priv->rx_skbuff_dma[entry], priv->dma_buf_sz, DMA_FROM_DEVICE); -#ifdef STMMAC_RX_DEBUG + if (netif_msg_pktdata(priv)) { - pr_info(" frame received (%dbytes)", frame_len); + pr_debug("frame received (%dbytes)", frame_len); print_pkt(skb->data, frame_len); } -#endif + + stmmac_rx_vlan(priv->dev, skb); + skb->protocol = eth_type_trans(skb, priv->dev); - if (unlikely(!priv->rx_coe)) { - /* No RX COE for old mac10/100 devices */ + if (unlikely(!coe)) skb_checksum_none_assert(skb); - netif_receive_skb(skb); - } else { + else skb->ip_summed = CHECKSUM_UNNECESSARY; - napi_gro_receive(&priv->napi, skb); - } + + napi_gro_receive(&priv->napi, skb); priv->dev->stats.rx_packets++; priv->dev->stats.rx_bytes += frame_len; } entry = next_entry; - p = p_next; /* use prefetched values */ } stmmac_rx_refill(priv); @@ -1342,21 +2178,20 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit) * @budget : maximum number of packets that the current CPU can receive from * all interfaces. * Description : - * This function implements the the reception process. - * Also it runs the TX completion thread + * To look at the incoming frames and clear the tx resources. */ static int stmmac_poll(struct napi_struct *napi, int budget) { struct stmmac_priv *priv = container_of(napi, struct stmmac_priv, napi); int work_done = 0; - priv->xstats.poll_n++; - stmmac_tx(priv); - work_done = stmmac_rx(priv, budget); + priv->xstats.napi_poll++; + stmmac_tx_clean(priv); + work_done = stmmac_rx(priv, budget); if (work_done < budget) { napi_complete(napi); - stmmac_enable_irq(priv); + stmmac_enable_dma_irq(priv); } return work_done; } @@ -1365,7 +2200,7 @@ static int stmmac_poll(struct napi_struct *napi, int budget) * stmmac_tx_timeout * @dev : Pointer to net device structure * Description: this function is called when a packet transmission fails to - * complete within a reasonable tmrate. The driver will mark the error in the + * complete within a reasonable time. The driver will mark the error in the * netdev structure and arrange for the device to be reset to a sane state * in order to transmit a new packet. */ @@ -1377,29 +2212,6 @@ static void stmmac_tx_timeout(struct net_device *dev) stmmac_tx_err(priv); } -/* Configuration changes (passed on by ifconfig) */ -static int stmmac_config(struct net_device *dev, struct ifmap *map) -{ - if (dev->flags & IFF_UP) /* can't act on a running interface */ - return -EBUSY; - - /* Don't allow changing the I/O address */ - if (map->base_addr != dev->base_addr) { - pr_warning("%s: can't change I/O address\n", dev->name); - return -EOPNOTSUPP; - } - - /* Don't allow changing the IRQ */ - if (map->irq != dev->irq) { - pr_warning("%s: can't change IRQ number %d\n", - dev->name, dev->irq); - return -EOPNOTSUPP; - } - - /* ignore other fields */ - return 0; -} - /** * stmmac_set_rx_mode - entry point for multicast addressing * @dev : pointer to the device structure @@ -1414,7 +2226,7 @@ static void stmmac_set_rx_mode(struct net_device *dev) struct stmmac_priv *priv = netdev_priv(dev); spin_lock(&priv->lock); - priv->hw->mac->set_filter(dev); + priv->hw->mac->set_filter(dev, priv->synopsys_id); spin_unlock(&priv->lock); } @@ -1444,6 +2256,9 @@ static int stmmac_change_mtu(struct net_device *dev, int new_mtu) else max_mtu = SKB_MAX_HEAD(NET_SKB_PAD + NET_IP_ALIGN); + if (priv->plat->maxmtu < max_mtu) + max_mtu = priv->plat->maxmtu; + if ((new_mtu < 46) || (new_mtu > max_mtu)) { pr_err("%s: invalid MTU, max MTU is: %d\n", dev->name, max_mtu); return -EINVAL; @@ -1456,39 +2271,64 @@ static int stmmac_change_mtu(struct net_device *dev, int new_mtu) } static netdev_features_t stmmac_fix_features(struct net_device *dev, - netdev_features_t features) + netdev_features_t features) { struct stmmac_priv *priv = netdev_priv(dev); - if (!priv->rx_coe) + if (priv->plat->rx_coe == STMMAC_RX_COE_NONE) features &= ~NETIF_F_RXCSUM; + else if (priv->plat->rx_coe == STMMAC_RX_COE_TYPE1) + features &= ~NETIF_F_IPV6_CSUM; if (!priv->plat->tx_coe) features &= ~NETIF_F_ALL_CSUM; /* Some GMAC devices have a bugged Jumbo frame support that * needs to have the Tx COE disabled for oversized frames * (due to limited buffer sizes). In this case we disable - * the TX csum insertionin the TDES and not use SF. */ + * the TX csum insertionin the TDES and not use SF. + */ if (priv->plat->bugged_jumbo && (dev->mtu > ETH_DATA_LEN)) features &= ~NETIF_F_ALL_CSUM; return features; } +/** + * stmmac_interrupt - main ISR + * @irq: interrupt number. + * @dev_id: to pass the net device pointer. + * Description: this is the main driver interrupt service routine. + * It calls the DMA ISR and also the core ISR to manage PMT, MMC, LPI + * interrupts. + */ static irqreturn_t stmmac_interrupt(int irq, void *dev_id) { struct net_device *dev = (struct net_device *)dev_id; struct stmmac_priv *priv = netdev_priv(dev); + if (priv->irq_wake) + pm_wakeup_event(priv->device, 0); + if (unlikely(!dev)) { pr_err("%s: invalid dev pointer\n", __func__); return IRQ_NONE; } - if (priv->plat->has_gmac) - /* To handle GMAC own interrupts */ - priv->hw->mac->host_irq_status((void __iomem *) dev->base_addr); + /* To handle GMAC own interrupts */ + if (priv->plat->has_gmac) { + int status = priv->hw->mac->host_irq_status((void __iomem *) + dev->base_addr, + &priv->xstats); + if (unlikely(status)) { + /* For LPI we need to save the tx status */ + if (status & CORE_IRQ_TX_PATH_IN_LPI_MODE) + priv->tx_path_in_lpi_mode = true; + if (status & CORE_IRQ_TX_PATH_EXIT_LPI_MODE) + priv->tx_path_in_lpi_mode = false; + } + } + /* To handle DMA interrupts */ stmmac_dma_interrupt(priv); return IRQ_HANDLED; @@ -1496,7 +2336,8 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id) #ifdef CONFIG_NET_POLL_CONTROLLER /* Polling receive - used by NETCONSOLE and other diagnostic tools - * to allow network I/O with interrupts disabled. */ + * to allow network I/O with interrupts disabled. + */ static void stmmac_poll_controller(struct net_device *dev) { disable_irq(dev->irq); @@ -1512,21 +2353,30 @@ static void stmmac_poll_controller(struct net_device *dev) * a proprietary structure used to pass information to the driver. * @cmd: IOCTL command * Description: - * Currently there are no special functionality supported in IOCTL, just the - * phy_mii_ioctl(...) can be invoked. + * Currently it supports the phy_mii_ioctl(...) and HW time stamping. */ static int stmmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { struct stmmac_priv *priv = netdev_priv(dev); - int ret; + int ret = -EOPNOTSUPP; if (!netif_running(dev)) return -EINVAL; - if (!priv->phydev) - return -EINVAL; - - ret = phy_mii_ioctl(priv->phydev, rq, cmd); + switch (cmd) { + case SIOCGMIIPHY: + case SIOCGMIIREG: + case SIOCSMIIREG: + if (!priv->phydev) + return -EINVAL; + ret = phy_mii_ioctl(priv->phydev, rq, cmd); + break; + case SIOCSHWTSTAMP: + ret = stmmac_hwtstamp_ioctl(dev, rq); + break; + default: + break; + } return ret; } @@ -1536,40 +2386,51 @@ static struct dentry *stmmac_fs_dir; static struct dentry *stmmac_rings_status; static struct dentry *stmmac_dma_cap; -static int stmmac_sysfs_ring_read(struct seq_file *seq, void *v) +static void sysfs_display_ring(void *head, int size, int extend_desc, + struct seq_file *seq) { - struct tmp_s { - u64 a; - unsigned int b; - unsigned int c; - }; int i; - struct net_device *dev = seq->private; - struct stmmac_priv *priv = netdev_priv(dev); - - seq_printf(seq, "=======================\n"); - seq_printf(seq, " RX descriptor ring\n"); - seq_printf(seq, "=======================\n"); + struct dma_extended_desc *ep = (struct dma_extended_desc *)head; + struct dma_desc *p = (struct dma_desc *)head; - for (i = 0; i < priv->dma_rx_size; i++) { - struct tmp_s *x = (struct tmp_s *)(priv->dma_rx + i); - seq_printf(seq, "[%d] DES0=0x%x DES1=0x%x BUF1=0x%x BUF2=0x%x", - i, (unsigned int)(x->a), - (unsigned int)((x->a) >> 32), x->b, x->c); + for (i = 0; i < size; i++) { + u64 x; + if (extend_desc) { + x = *(u64 *) ep; + seq_printf(seq, "%d [0x%x]: 0x%x 0x%x 0x%x 0x%x\n", + i, (unsigned int)virt_to_phys(ep), + (unsigned int)x, (unsigned int)(x >> 32), + ep->basic.des2, ep->basic.des3); + ep++; + } else { + x = *(u64 *) p; + seq_printf(seq, "%d [0x%x]: 0x%x 0x%x 0x%x 0x%x\n", + i, (unsigned int)virt_to_phys(ep), + (unsigned int)x, (unsigned int)(x >> 32), + p->des2, p->des3); + p++; + } seq_printf(seq, "\n"); } +} - seq_printf(seq, "\n"); - seq_printf(seq, "=======================\n"); - seq_printf(seq, " TX descriptor ring\n"); - seq_printf(seq, "=======================\n"); +static int stmmac_sysfs_ring_read(struct seq_file *seq, void *v) +{ + struct net_device *dev = seq->private; + struct stmmac_priv *priv = netdev_priv(dev); + unsigned int txsize = priv->dma_tx_size; + unsigned int rxsize = priv->dma_rx_size; - for (i = 0; i < priv->dma_tx_size; i++) { - struct tmp_s *x = (struct tmp_s *)(priv->dma_tx + i); - seq_printf(seq, "[%d] DES0=0x%x DES1=0x%x BUF1=0x%x BUF2=0x%x", - i, (unsigned int)(x->a), - (unsigned int)((x->a) >> 32), x->b, x->c); - seq_printf(seq, "\n"); + if (priv->extend_desc) { + seq_printf(seq, "Extended RX descriptor ring:\n"); + sysfs_display_ring((void *)priv->dma_erx, rxsize, 1, seq); + seq_printf(seq, "Extended TX descriptor ring:\n"); + sysfs_display_ring((void *)priv->dma_etx, txsize, 1, seq); + } else { + seq_printf(seq, "RX descriptor ring:\n"); + sysfs_display_ring((void *)priv->dma_rx, rxsize, 0, seq); + seq_printf(seq, "TX descriptor ring:\n"); + sysfs_display_ring((void *)priv->dma_tx, txsize, 0, seq); } return 0; @@ -1585,7 +2446,7 @@ static const struct file_operations stmmac_rings_status_fops = { .open = stmmac_sysfs_ring_open, .read = seq_read, .llseek = seq_lseek, - .release = seq_release, + .release = single_release, }; static int stmmac_sysfs_dma_cap_read(struct seq_file *seq, void *v) @@ -1657,7 +2518,7 @@ static const struct file_operations stmmac_dma_cap_fops = { .open = stmmac_sysfs_dma_cap_open, .read = seq_read, .llseek = seq_lseek, - .release = seq_release, + .release = single_release, }; static int stmmac_init_fs(struct net_device *dev) @@ -1674,8 +2535,8 @@ static int stmmac_init_fs(struct net_device *dev) /* Entry to report DMA RX/TX rings */ stmmac_rings_status = debugfs_create_file("descriptors_status", - S_IRUGO, stmmac_fs_dir, dev, - &stmmac_rings_status_fops); + S_IRUGO, stmmac_fs_dir, dev, + &stmmac_rings_status_fops); if (!stmmac_rings_status || IS_ERR(stmmac_rings_status)) { pr_info("ERROR creating stmmac ring debugfs file\n"); @@ -1716,7 +2577,6 @@ static const struct net_device_ops stmmac_netdev_ops = { .ndo_set_rx_mode = stmmac_set_rx_mode, .ndo_tx_timeout = stmmac_tx_timeout, .ndo_do_ioctl = stmmac_ioctl, - .ndo_set_config = stmmac_config, #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = stmmac_poll_controller, #endif @@ -1725,7 +2585,7 @@ static const struct net_device_ops stmmac_netdev_ops = { /** * stmmac_hw_init - Init the MAC device - * @priv : pointer to the private device structure. + * @priv: driver private structure * Description: this function detects which MAC device * (GMAC/MAC10-100) has to attached, checks the HW capability * (if supported) and sets the driver's features (for example @@ -1734,24 +2594,34 @@ static const struct net_device_ops stmmac_netdev_ops = { */ static int stmmac_hw_init(struct stmmac_priv *priv) { - int ret = 0; + int ret; struct mac_device_info *mac; /* Identify the MAC HW device */ - if (priv->plat->has_gmac) + if (priv->plat->has_gmac) { + priv->dev->priv_flags |= IFF_UNICAST_FLT; mac = dwmac1000_setup(priv->ioaddr); - else + } else { mac = dwmac100_setup(priv->ioaddr); + } if (!mac) return -ENOMEM; priv->hw = mac; - /* To use the chained or ring mode */ - priv->hw->ring = &ring_mode_ops; - /* Get and dump the chip ID */ - stmmac_get_synopsys_id(priv); + priv->synopsys_id = stmmac_get_synopsys_id(priv); + + /* To use the chained or ring mode */ + if (chain_mode) { + priv->hw->mode = &chain_mode_ops; + pr_info(" Chain mode enabled\n"); + priv->mode = STMMAC_CHAIN_MODE; + } else { + priv->hw->mode = &ring_mode_ops; + pr_info(" Ring mode enabled\n"); + priv->mode = STMMAC_RING_MODE; + } /* Get the HW capability (new GMAC newer than 3.50a) */ priv->hw_cap_support = stmmac_get_hw_features(priv); @@ -1764,17 +2634,30 @@ static int stmmac_hw_init(struct stmmac_priv *priv) * register (if supported). */ priv->plat->enh_desc = priv->dma_cap.enh_desc; - priv->plat->tx_coe = priv->dma_cap.tx_coe; priv->plat->pmt = priv->dma_cap.pmt_remote_wake_up; + + priv->plat->tx_coe = priv->dma_cap.tx_coe; + + if (priv->dma_cap.rx_coe_type2) + priv->plat->rx_coe = STMMAC_RX_COE_TYPE2; + else if (priv->dma_cap.rx_coe_type1) + priv->plat->rx_coe = STMMAC_RX_COE_TYPE1; + } else pr_info(" No HW DMA feature register supported"); - /* Select the enhnaced/normal descriptor structures */ + /* To use alternate (extended) or normal descriptor structures */ stmmac_selec_desc_mode(priv); - priv->rx_coe = priv->hw->mac->rx_coe(priv->ioaddr); - if (priv->rx_coe) - pr_info(" RX Checksum Offload Engine supported\n"); + ret = priv->hw->mac->rx_ipc(priv->ioaddr); + if (!ret) { + pr_warn(" RX IPC Checksum Offload not configured.\n"); + priv->plat->rx_coe = STMMAC_RX_COE_NONE; + } + + if (priv->plat->rx_coe) + pr_info(" RX Checksum Offload Engine supported (type %d)\n", + priv->plat->rx_coe); if (priv->plat->tx_coe) pr_info(" TX Checksum insertion supported\n"); @@ -1783,12 +2666,14 @@ static int stmmac_hw_init(struct stmmac_priv *priv) device_set_wakeup_capable(priv->device, 1); } - return ret; + return 0; } /** * stmmac_dvr_probe * @device: device pointer + * @plat_dat: platform data pointer + * @addr: iobase memory address * Description: this is the main probe function used to * call the alloc_etherdev, allocate the priv structure. */ @@ -1801,10 +2686,8 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device, struct stmmac_priv *priv; ndev = alloc_etherdev(sizeof(struct stmmac_priv)); - if (!ndev) { - pr_err("%s: ERROR: allocating the device\n", __func__); + if (!ndev) return NULL; - } SET_NETDEV_DEV(ndev, device); @@ -1824,12 +2707,37 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device, stmmac_verify_args(); /* Override with kernel parameters if supplied XXX CRS XXX - * this needs to have multiple instances */ + * this needs to have multiple instances + */ if ((phyaddr >= 0) && (phyaddr <= 31)) priv->plat->phy_addr = phyaddr; + priv->stmmac_clk = devm_clk_get(priv->device, STMMAC_RESOURCE_NAME); + if (IS_ERR(priv->stmmac_clk)) { + dev_warn(priv->device, "%s: warning: cannot get CSR clock\n", + __func__); + ret = PTR_ERR(priv->stmmac_clk); + goto error_clk_get; + } + clk_prepare_enable(priv->stmmac_clk); + + priv->stmmac_rst = devm_reset_control_get(priv->device, + STMMAC_RESOURCE_NAME); + if (IS_ERR(priv->stmmac_rst)) { + if (PTR_ERR(priv->stmmac_rst) == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto error_hw_init; + } + dev_info(priv->device, "no reset control found\n"); + priv->stmmac_rst = NULL; + } + if (priv->stmmac_rst) + reset_control_deassert(priv->stmmac_rst); + /* Init MAC and get the capabilities */ - stmmac_hw_init(priv); + ret = stmmac_hw_init(priv); + if (ret) + goto error_hw_init; ndev->netdev_ops = &stmmac_netdev_ops; @@ -1839,13 +2747,23 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device, ndev->watchdog_timeo = msecs_to_jiffies(watchdog); #ifdef STMMAC_VLAN_TAG_USED /* Both mac100 and gmac support receive VLAN tag detection */ - ndev->features |= NETIF_F_HW_VLAN_RX; + ndev->features |= NETIF_F_HW_VLAN_CTAG_RX; #endif priv->msg_enable = netif_msg_init(debug, default_msg_level); if (flow_ctrl) priv->flow_ctrl = FLOW_AUTO; /* RX/TX pause on */ + /* Rx Watchdog is available in the COREs newer than the 3.40. + * In some case, for example on bugged HW this feature + * has to be disable and this can be done by passing the + * riwt_off field from the platform. + */ + if ((priv->synopsys_id >= DWMAC_CORE_3_50) && (!priv->plat->riwt_off)) { + priv->use_riwt = 1; + pr_info(" Enable RX Mitigation via HW Watchdog Timer\n"); + } + netif_napi_add(ndev, &priv->napi, stmmac_poll, 64); spin_lock_init(&priv->lock); @@ -1854,18 +2772,45 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device, ret = register_netdev(ndev); if (ret) { pr_err("%s: ERROR %i registering the device\n", __func__, ret); - goto error; + goto error_netdev_register; } - return priv; + /* If a specific clk_csr value is passed from the platform + * this means that the CSR Clock Range selection cannot be + * changed at run-time and it is fixed. Viceversa the driver'll try to + * set the MDC clock dynamically according to the csr actual + * clock input. + */ + if (!priv->plat->clk_csr) + stmmac_clk_csr_set(priv); + else + priv->clk_csr = priv->plat->clk_csr; + + stmmac_check_pcs_mode(priv); + + if (priv->pcs != STMMAC_PCS_RGMII && priv->pcs != STMMAC_PCS_TBI && + priv->pcs != STMMAC_PCS_RTBI) { + /* MDIO bus Registration */ + ret = stmmac_mdio_register(ndev); + if (ret < 0) { + pr_debug("%s: MDIO bus (id: %d) registration failed", + __func__, priv->plat->bus_id); + goto error_mdio_register; + } + } -error: - netif_napi_del(&priv->napi); + return priv; +error_mdio_register: unregister_netdev(ndev); +error_netdev_register: + netif_napi_del(&priv->napi); +error_hw_init: + clk_disable_unprepare(priv->stmmac_clk); +error_clk_get: free_netdev(ndev); - return NULL; + return ERR_PTR(ret); } /** @@ -1884,8 +2829,14 @@ int stmmac_dvr_remove(struct net_device *ndev) priv->hw->dma->stop_tx(priv->ioaddr); stmmac_set_mac(priv->ioaddr, false); + if (priv->pcs != STMMAC_PCS_RGMII && priv->pcs != STMMAC_PCS_TBI && + priv->pcs != STMMAC_PCS_RTBI) + stmmac_mdio_unregister(ndev); netif_carrier_off(ndev); unregister_netdev(ndev); + if (priv->stmmac_rst) + reset_control_assert(priv->stmmac_rst); + clk_disable_unprepare(priv->stmmac_clk); free_netdev(ndev); return 0; @@ -1895,7 +2846,7 @@ int stmmac_dvr_remove(struct net_device *ndev) int stmmac_suspend(struct net_device *ndev) { struct stmmac_priv *priv = netdev_priv(ndev); - int dis_ic = 0; + unsigned long flags; if (!ndev || !netif_running(ndev)) return 0; @@ -1903,92 +2854,107 @@ int stmmac_suspend(struct net_device *ndev) if (priv->phydev) phy_stop(priv->phydev); - spin_lock(&priv->lock); + spin_lock_irqsave(&priv->lock, flags); netif_device_detach(ndev); netif_stop_queue(ndev); -#ifdef CONFIG_STMMAC_TIMER - priv->tm->timer_stop(); - if (likely(priv->tm->enable)) - dis_ic = 1; -#endif napi_disable(&priv->napi); /* Stop TX/RX DMA */ priv->hw->dma->stop_tx(priv->ioaddr); priv->hw->dma->stop_rx(priv->ioaddr); - /* Clear the Rx/Tx descriptors */ - priv->hw->desc->init_rx_desc(priv->dma_rx, priv->dma_rx_size, - dis_ic); - priv->hw->desc->init_tx_desc(priv->dma_tx, priv->dma_tx_size); + + stmmac_clear_descriptors(priv); /* Enable Power down mode by programming the PMT regs */ - if (device_may_wakeup(priv->device)) + if (device_may_wakeup(priv->device)) { priv->hw->mac->pmt(priv->ioaddr, priv->wolopts); - else + priv->irq_wake = 1; + } else { stmmac_set_mac(priv->ioaddr, false); - - spin_unlock(&priv->lock); + pinctrl_pm_select_sleep_state(priv->device); + /* Disable clock in case of PWM is off */ + clk_disable_unprepare(priv->stmmac_clk); + } + spin_unlock_irqrestore(&priv->lock, flags); return 0; } int stmmac_resume(struct net_device *ndev) { struct stmmac_priv *priv = netdev_priv(ndev); + unsigned long flags; if (!netif_running(ndev)) return 0; - spin_lock(&priv->lock); + spin_lock_irqsave(&priv->lock, flags); /* Power Down bit, into the PM register, is cleared * automatically as soon as a magic packet or a Wake-up frame * is received. Anyway, it's better to manually clear * this bit because it can generate problems while resuming - * from another devices (e.g. serial console). */ - if (device_may_wakeup(priv->device)) + * from another devices (e.g. serial console). + */ + if (device_may_wakeup(priv->device)) { priv->hw->mac->pmt(priv->ioaddr, 0); + priv->irq_wake = 0; + } else { + pinctrl_pm_select_default_state(priv->device); + /* enable the clk prevously disabled */ + clk_prepare_enable(priv->stmmac_clk); + /* reset the phy so that it's ready */ + if (priv->mii) + stmmac_mdio_reset(priv->mii); + } netif_device_attach(ndev); - /* Enable the MAC and DMA */ - stmmac_set_mac(priv->ioaddr, true); - priv->hw->dma->start_tx(priv->ioaddr); - priv->hw->dma->start_rx(priv->ioaddr); + stmmac_hw_setup(ndev); -#ifdef CONFIG_STMMAC_TIMER - if (likely(priv->tm->enable)) - priv->tm->timer_start(tmrate); -#endif napi_enable(&priv->napi); netif_start_queue(ndev); - spin_unlock(&priv->lock); + spin_unlock_irqrestore(&priv->lock, flags); if (priv->phydev) phy_start(priv->phydev); return 0; } +#endif /* CONFIG_PM */ -int stmmac_freeze(struct net_device *ndev) +/* Driver can be configured w/ and w/ both PCI and Platf drivers + * depending on the configuration selected. + */ +static int __init stmmac_init(void) { - if (!ndev || !netif_running(ndev)) - return 0; + int ret; - return stmmac_release(ndev); + ret = stmmac_register_platform(); + if (ret) + goto err; + ret = stmmac_register_pci(); + if (ret) + goto err_pci; + return 0; +err_pci: + stmmac_unregister_platform(); +err: + pr_err("stmmac: driver registration failed\n"); + return ret; } -int stmmac_restore(struct net_device *ndev) +static void __exit stmmac_exit(void) { - if (!ndev || !netif_running(ndev)) - return 0; - - return stmmac_open(ndev); + stmmac_unregister_platform(); + stmmac_unregister_pci(); } -#endif /* CONFIG_PM */ + +module_init(stmmac_init); +module_exit(stmmac_exit); #ifndef MODULE static int __init stmmac_cmdline_opt(char *str) @@ -1999,44 +2965,38 @@ static int __init stmmac_cmdline_opt(char *str) return -EINVAL; while ((opt = strsep(&str, ",")) != NULL) { if (!strncmp(opt, "debug:", 6)) { - if (strict_strtoul(opt + 6, 0, (unsigned long *)&debug)) + if (kstrtoint(opt + 6, 0, &debug)) goto err; } else if (!strncmp(opt, "phyaddr:", 8)) { - if (strict_strtoul(opt + 8, 0, - (unsigned long *)&phyaddr)) + if (kstrtoint(opt + 8, 0, &phyaddr)) goto err; } else if (!strncmp(opt, "dma_txsize:", 11)) { - if (strict_strtoul(opt + 11, 0, - (unsigned long *)&dma_txsize)) + if (kstrtoint(opt + 11, 0, &dma_txsize)) goto err; } else if (!strncmp(opt, "dma_rxsize:", 11)) { - if (strict_strtoul(opt + 11, 0, - (unsigned long *)&dma_rxsize)) + if (kstrtoint(opt + 11, 0, &dma_rxsize)) goto err; } else if (!strncmp(opt, "buf_sz:", 7)) { - if (strict_strtoul(opt + 7, 0, - (unsigned long *)&buf_sz)) + if (kstrtoint(opt + 7, 0, &buf_sz)) goto err; } else if (!strncmp(opt, "tc:", 3)) { - if (strict_strtoul(opt + 3, 0, (unsigned long *)&tc)) + if (kstrtoint(opt + 3, 0, &tc)) goto err; } else if (!strncmp(opt, "watchdog:", 9)) { - if (strict_strtoul(opt + 9, 0, - (unsigned long *)&watchdog)) + if (kstrtoint(opt + 9, 0, &watchdog)) goto err; } else if (!strncmp(opt, "flow_ctrl:", 10)) { - if (strict_strtoul(opt + 10, 0, - (unsigned long *)&flow_ctrl)) + if (kstrtoint(opt + 10, 0, &flow_ctrl)) goto err; } else if (!strncmp(opt, "pause:", 6)) { - if (strict_strtoul(opt + 6, 0, (unsigned long *)&pause)) + if (kstrtoint(opt + 6, 0, &pause)) goto err; -#ifdef CONFIG_STMMAC_TIMER - } else if (!strncmp(opt, "tmrate:", 7)) { - if (strict_strtoul(opt + 7, 0, - (unsigned long *)&tmrate)) + } else if (!strncmp(opt, "eee_timer:", 10)) { + if (kstrtoint(opt + 10, 0, &eee_timer)) + goto err; + } else if (!strncmp(opt, "chain_mode:", 11)) { + if (kstrtoint(opt + 11, 0, &chain_mode)) goto err; -#endif } } return 0; @@ -2047,7 +3007,7 @@ err: } __setup("stmmaceth=", stmmac_cmdline_opt); -#endif +#endif /* MODULE */ MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet device driver"); MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>"); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c index 73195329aa4..a5b1e1b776f 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c @@ -27,6 +27,9 @@ #include <linux/mii.h> #include <linux/phy.h> #include <linux/slab.h> +#include <linux/of.h> +#include <linux/of_gpio.h> + #include <asm/io.h> #include "stmmac.h" @@ -34,6 +37,22 @@ #define MII_BUSY 0x00000001 #define MII_WRITE 0x00000002 +static int stmmac_mdio_busy_wait(void __iomem *ioaddr, unsigned int mii_addr) +{ + unsigned long curr; + unsigned long finish = jiffies + 3 * HZ; + + do { + curr = jiffies; + if (readl(ioaddr + mii_addr) & MII_BUSY) + cpu_relax(); + else + return 0; + } while (!time_after_eq(curr, finish)); + + return -EBUSY; +} + /** * stmmac_mdio_read * @bus: points to the mii_bus structure @@ -54,11 +73,15 @@ static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg) int data; u16 regValue = (((phyaddr << 11) & (0x0000F800)) | ((phyreg << 6) & (0x000007C0))); - regValue |= MII_BUSY | ((priv->plat->clk_csr & 7) << 2); + regValue |= MII_BUSY | ((priv->clk_csr & 0xF) << 2); + + if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address)) + return -EBUSY; - do {} while (((readl(priv->ioaddr + mii_address)) & MII_BUSY) == 1); writel(regValue, priv->ioaddr + mii_address); - do {} while (((readl(priv->ioaddr + mii_address)) & MII_BUSY) == 1); + + if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address)) + return -EBUSY; /* Read the data from the MII data register */ data = (int)readl(priv->ioaddr + mii_data); @@ -86,20 +109,18 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg, (((phyaddr << 11) & (0x0000F800)) | ((phyreg << 6) & (0x000007C0))) | MII_WRITE; - value |= MII_BUSY | ((priv->plat->clk_csr & 7) << 2); - + value |= MII_BUSY | ((priv->clk_csr & 0xF) << 2); /* Wait until any existing MII operation is complete */ - do {} while (((readl(priv->ioaddr + mii_address)) & MII_BUSY) == 1); + if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address)) + return -EBUSY; /* Set the MII address register to write */ writel(phydata, priv->ioaddr + mii_data); writel(value, priv->ioaddr + mii_address); /* Wait until any existing MII operation is complete */ - do {} while (((readl(priv->ioaddr + mii_address)) & MII_BUSY) == 1); - - return 0; + return stmmac_mdio_busy_wait(priv->ioaddr, mii_address); } /** @@ -107,16 +128,51 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg, * @bus: points to the mii_bus structure * Description: reset the MII bus */ -static int stmmac_mdio_reset(struct mii_bus *bus) +int stmmac_mdio_reset(struct mii_bus *bus) { #if defined(CONFIG_STMMAC_PLATFORM) struct net_device *ndev = bus->priv; struct stmmac_priv *priv = netdev_priv(ndev); unsigned int mii_address = priv->hw->mii.addr; + struct stmmac_mdio_bus_data *data = priv->plat->mdio_bus_data; + +#ifdef CONFIG_OF + if (priv->device->of_node) { + int reset_gpio, active_low; + + if (data->reset_gpio < 0) { + struct device_node *np = priv->device->of_node; + if (!np) + return 0; + + data->reset_gpio = of_get_named_gpio(np, + "snps,reset-gpio", 0); + if (data->reset_gpio < 0) + return 0; + + data->active_low = of_property_read_bool(np, + "snps,reset-active-low"); + of_property_read_u32_array(np, + "snps,reset-delays-us", data->delays, 3); + } - if (priv->plat->mdio_bus_data->phy_reset) { + reset_gpio = data->reset_gpio; + active_low = data->active_low; + + if (!gpio_request(reset_gpio, "mdio-reset")) { + gpio_direction_output(reset_gpio, active_low ? 1 : 0); + udelay(data->delays[0]); + gpio_set_value(reset_gpio, active_low ? 0 : 1); + udelay(data->delays[1]); + gpio_set_value(reset_gpio, active_low ? 1 : 0); + udelay(data->delays[2]); + } + } +#endif + + if (data->phy_reset) { pr_debug("stmmac_mdio_reset: calling phy_reset\n"); - priv->plat->mdio_bus_data->phy_reset(priv->plat->bsp_priv); + data->phy_reset(priv->plat->bsp_priv); } /* This is a workaround for problems with the STE101P PHY. @@ -149,17 +205,25 @@ int stmmac_mdio_register(struct net_device *ndev) if (new_bus == NULL) return -ENOMEM; - if (mdio_bus_data->irqs) + if (mdio_bus_data->irqs) { irqlist = mdio_bus_data->irqs; - else + } else { + for (addr = 0; addr < PHY_MAX_ADDR; addr++) + priv->mii_irq[addr] = PHY_POLL; irqlist = priv->mii_irq; + } + +#ifdef CONFIG_OF + if (priv->device->of_node) + mdio_bus_data->reset_gpio = -1; +#endif new_bus->name = "stmmac"; new_bus->read = &stmmac_mdio_read; new_bus->write = &stmmac_mdio_write; new_bus->reset = &stmmac_mdio_reset; snprintf(new_bus->id, MII_BUS_ID_SIZE, "%s-%x", - new_bus->name, mdio_bus_data->bus_id); + new_bus->name, priv->plat->bus_id); new_bus->priv = ndev; new_bus->irq = irqlist; new_bus->phy_mask = mdio_bus_data->phy_mask; @@ -170,8 +234,6 @@ int stmmac_mdio_register(struct net_device *ndev) goto bus_register_fail; } - priv->mii = new_bus; - found = 0; for (addr = 0; addr < PHY_MAX_ADDR; addr++) { struct phy_device *phydev = new_bus->phy_map[addr]; @@ -195,12 +257,10 @@ int stmmac_mdio_register(struct net_device *ndev) * and no PHY number was provided to the MAC, * use the one probed here. */ - if ((priv->plat->bus_id == mdio_bus_data->bus_id) && - (priv->plat->phy_addr == -1)) + if (priv->plat->phy_addr == -1) priv->plat->phy_addr = addr; - act = (priv->plat->bus_id == mdio_bus_data->bus_id) && - (priv->plat->phy_addr == addr); + act = (priv->plat->phy_addr == addr); switch (phydev->irq) { case PHY_POLL: irq_str = "POLL"; @@ -221,8 +281,14 @@ int stmmac_mdio_register(struct net_device *ndev) } } - if (!found) + if (!found) { pr_warning("%s: No PHY found\n", ndev->name); + mdiobus_unregister(new_bus); + mdiobus_free(new_bus); + return -ENODEV; + } + + priv->mii = new_bus; return 0; @@ -240,6 +306,9 @@ int stmmac_mdio_unregister(struct net_device *ndev) { struct stmmac_priv *priv = netdev_priv(ndev); + if (!priv->mii) + return 0; + mdiobus_unregister(priv->mii); priv->mii->priv = NULL; mdiobus_free(priv->mii); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c index 50ad5b80cfa..29160892484 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c @@ -26,8 +26,9 @@ #include <linux/pci.h> #include "stmmac.h" -struct plat_stmmacenet_data plat_dat; -struct stmmac_mdio_bus_data mdio_data; +static struct plat_stmmacenet_data plat_dat; +static struct stmmac_mdio_bus_data mdio_data; +static struct stmmac_dma_cfg dma_cfg; static void stmmac_default_data(void) { @@ -35,15 +36,17 @@ static void stmmac_default_data(void) plat_dat.bus_id = 1; plat_dat.phy_addr = 0; plat_dat.interface = PHY_INTERFACE_MODE_GMII; - plat_dat.pbl = 32; plat_dat.clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */ plat_dat.has_gmac = 1; plat_dat.force_sf_dma_mode = 1; - mdio_data.bus_id = 1; mdio_data.phy_reset = NULL; mdio_data.phy_mask = 0; plat_dat.mdio_bus_data = &mdio_data; + + dma_cfg.pbl = 32; + dma_cfg.burst_len = DMA_AXI_BLEN_256; + plat_dat.dma_cfg = &dma_cfg; } /** @@ -58,8 +61,8 @@ static void stmmac_default_data(void) * matches the device. The probe functions returns zero when the driver choose * to take "ownership" of the device or an error code(-ve no) otherwise. */ -static int __devinit stmmac_pci_probe(struct pci_dev *pdev, - const struct pci_device_id *id) +static int stmmac_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id) { int ret = 0; void __iomem *addr = NULL; @@ -85,7 +88,7 @@ static int __devinit stmmac_pci_probe(struct pci_dev *pdev, continue; addr = pci_iomap(pdev, i, 0); if (addr == NULL) { - pr_err("%s: ERROR: cannot map regiser memory, aborting", + pr_err("%s: ERROR: cannot map register memory aborting", __func__); ret = -EIO; goto err_out_map_failed; @@ -97,8 +100,9 @@ static int __devinit stmmac_pci_probe(struct pci_dev *pdev, stmmac_default_data(); priv = stmmac_dvr_probe(&(pdev->dev), &plat_dat, addr); - if (!priv) { + if (IS_ERR(priv)) { pr_err("%s: main driver probe failed", __func__); + ret = PTR_ERR(priv); goto err_out; } priv->dev->irq = pdev->irq; @@ -121,20 +125,19 @@ err_out_req_reg_failed: } /** - * stmmac_dvr_remove + * stmmac_pci_remove * * @pdev: platform device pointer * Description: this function calls the main to free the net resources * and releases the PCI resources. */ -static void __devexit stmmac_pci_remove(struct pci_dev *pdev) +static void stmmac_pci_remove(struct pci_dev *pdev) { struct net_device *ndev = pci_get_drvdata(pdev); struct stmmac_priv *priv = netdev_priv(ndev); stmmac_dvr_remove(ndev); - pci_set_drvdata(pdev, NULL); pci_iounmap(pdev, priv->ioaddr); pci_release_regions(pdev); pci_disable_device(pdev); @@ -175,44 +178,17 @@ static DEFINE_PCI_DEVICE_TABLE(stmmac_id_table) = { MODULE_DEVICE_TABLE(pci, stmmac_id_table); -static struct pci_driver stmmac_driver = { +struct pci_driver stmmac_pci_driver = { .name = STMMAC_RESOURCE_NAME, .id_table = stmmac_id_table, .probe = stmmac_pci_probe, - .remove = __devexit_p(stmmac_pci_remove), + .remove = stmmac_pci_remove, #ifdef CONFIG_PM .suspend = stmmac_pci_suspend, .resume = stmmac_pci_resume, #endif }; -/** - * stmmac_init_module - Entry point for the driver - * Description: This function is the entry point for the driver. - */ -static int __init stmmac_init_module(void) -{ - int ret; - - ret = pci_register_driver(&stmmac_driver); - if (ret < 0) - pr_err("%s: ERROR: driver registration failed\n", __func__); - - return ret; -} - -/** - * stmmac_cleanup_module - Cleanup routine for the driver - * Description: This function is the cleanup routine for the driver. - */ -static void __exit stmmac_cleanup_module(void) -{ - pci_unregister_driver(&stmmac_driver); -} - -module_init(stmmac_init_module); -module_exit(stmmac_cleanup_module); - MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet PCI driver"); MODULE_AUTHOR("Rayagond Kokatanur <rayagond.kokatanur@vayavyalabs.com>"); MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>"); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 3aad9810237..ea7a65be1f9 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -24,8 +24,153 @@ #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/of.h> +#include <linux/of_net.h> +#include <linux/of_device.h> #include "stmmac.h" +static const struct of_device_id stmmac_dt_ids[] = { +#ifdef CONFIG_DWMAC_SUNXI + { .compatible = "allwinner,sun7i-a20-gmac", .data = &sun7i_gmac_data}, +#endif +#ifdef CONFIG_DWMAC_STI + { .compatible = "st,stih415-dwmac", .data = &sti_gmac_data}, + { .compatible = "st,stih416-dwmac", .data = &sti_gmac_data}, + { .compatible = "st,stid127-dwmac", .data = &sti_gmac_data}, +#endif +#ifdef CONFIG_DWMAC_SOCFPGA + { .compatible = "altr,socfpga-stmmac", .data = &socfpga_gmac_data }, +#endif + /* SoC specific glue layers should come before generic bindings */ + { .compatible = "st,spear600-gmac"}, + { .compatible = "snps,dwmac-3.610"}, + { .compatible = "snps,dwmac-3.70a"}, + { .compatible = "snps,dwmac-3.710"}, + { .compatible = "snps,dwmac"}, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, stmmac_dt_ids); + +#ifdef CONFIG_OF +static int stmmac_probe_config_dt(struct platform_device *pdev, + struct plat_stmmacenet_data *plat, + const char **mac) +{ + struct device_node *np = pdev->dev.of_node; + struct stmmac_dma_cfg *dma_cfg; + const struct of_device_id *device; + + if (!np) + return -ENODEV; + + device = of_match_device(stmmac_dt_ids, &pdev->dev); + if (!device) + return -ENODEV; + + if (device->data) { + const struct stmmac_of_data *data = device->data; + plat->has_gmac = data->has_gmac; + plat->enh_desc = data->enh_desc; + plat->tx_coe = data->tx_coe; + plat->rx_coe = data->rx_coe; + plat->bugged_jumbo = data->bugged_jumbo; + plat->pmt = data->pmt; + plat->riwt_off = data->riwt_off; + plat->fix_mac_speed = data->fix_mac_speed; + plat->bus_setup = data->bus_setup; + plat->setup = data->setup; + plat->free = data->free; + plat->init = data->init; + plat->exit = data->exit; + } + + *mac = of_get_mac_address(np); + plat->interface = of_get_phy_mode(np); + + /* Get max speed of operation from device tree */ + if (of_property_read_u32(np, "max-speed", &plat->max_speed)) + plat->max_speed = -1; + + plat->bus_id = of_alias_get_id(np, "ethernet"); + if (plat->bus_id < 0) + plat->bus_id = 0; + + /* Default to phy auto-detection */ + plat->phy_addr = -1; + + /* "snps,phy-addr" is not a standard property. Mark it as deprecated + * and warn of its use. Remove this when phy node support is added. + */ + if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0) + dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n"); + + plat->mdio_bus_data = devm_kzalloc(&pdev->dev, + sizeof(struct stmmac_mdio_bus_data), + GFP_KERNEL); + + plat->force_sf_dma_mode = of_property_read_bool(np, "snps,force_sf_dma_mode"); + + /* Set the maxmtu to a default of JUMBO_LEN in case the + * parameter is not present in the device tree. + */ + plat->maxmtu = JUMBO_LEN; + + /* + * Currently only the properties needed on SPEAr600 + * are provided. All other properties should be added + * once needed on other platforms. + */ + if (of_device_is_compatible(np, "st,spear600-gmac") || + of_device_is_compatible(np, "snps,dwmac-3.70a") || + of_device_is_compatible(np, "snps,dwmac")) { + /* Note that the max-frame-size parameter as defined in the + * ePAPR v1.1 spec is defined as max-frame-size, it's + * actually used as the IEEE definition of MAC Client + * data, or MTU. The ePAPR specification is confusing as + * the definition is max-frame-size, but usage examples + * are clearly MTUs + */ + of_property_read_u32(np, "max-frame-size", &plat->maxmtu); + plat->has_gmac = 1; + plat->pmt = 1; + } + + if (of_device_is_compatible(np, "snps,dwmac-3.610") || + of_device_is_compatible(np, "snps,dwmac-3.710")) { + plat->enh_desc = 1; + plat->bugged_jumbo = 1; + plat->force_sf_dma_mode = 1; + } + + if (of_find_property(np, "snps,pbl", NULL)) { + dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg), + GFP_KERNEL); + if (!dma_cfg) + return -ENOMEM; + plat->dma_cfg = dma_cfg; + of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl); + dma_cfg->fixed_burst = + of_property_read_bool(np, "snps,fixed-burst"); + dma_cfg->mixed_burst = + of_property_read_bool(np, "snps,mixed-burst"); + } + plat->force_thresh_dma_mode = of_property_read_bool(np, "snps,force_thresh_dma_mode"); + if (plat->force_thresh_dma_mode) { + plat->force_sf_dma_mode = 0; + pr_warn("force_sf_dma_mode is ignored if force_thresh_dma_mode is set."); + } + + return 0; +} +#else +static int stmmac_probe_config_dt(struct platform_device *pdev, + struct plat_stmmacenet_data *plat, + const char **mac) +{ + return -ENOSYS; +} +#endif /* CONFIG_OF */ + /** * stmmac_pltfr_probe * @pdev: platform device pointer @@ -37,49 +182,67 @@ static int stmmac_pltfr_probe(struct platform_device *pdev) { int ret = 0; struct resource *res; + struct device *dev = &pdev->dev; void __iomem *addr = NULL; struct stmmac_priv *priv = NULL; - struct plat_stmmacenet_data *plat_dat; + struct plat_stmmacenet_data *plat_dat = NULL; + const char *mac = NULL; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENODEV; - - if (!request_mem_region(res->start, resource_size(res), pdev->name)) { - pr_err("%s: ERROR: memory allocation failed" - "cannot get the I/O addr 0x%x\n", - __func__, (unsigned int)res->start); - return -EBUSY; + addr = devm_ioremap_resource(dev, res); + if (IS_ERR(addr)) + return PTR_ERR(addr); + + plat_dat = dev_get_platdata(&pdev->dev); + if (pdev->dev.of_node) { + if (!plat_dat) + plat_dat = devm_kzalloc(&pdev->dev, + sizeof(struct plat_stmmacenet_data), + GFP_KERNEL); + if (!plat_dat) { + pr_err("%s: ERROR: no memory", __func__); + return -ENOMEM; + } + + ret = stmmac_probe_config_dt(pdev, plat_dat, &mac); + if (ret) { + pr_err("%s: main dt probe failed", __func__); + return ret; + } } - addr = ioremap(res->start, resource_size(res)); - if (!addr) { - pr_err("%s: ERROR: memory mapping failed", __func__); - ret = -ENOMEM; - goto out_release_region; + /* Custom setup (if needed) */ + if (plat_dat->setup) { + plat_dat->bsp_priv = plat_dat->setup(pdev); + if (IS_ERR(plat_dat->bsp_priv)) + return PTR_ERR(plat_dat->bsp_priv); } - plat_dat = pdev->dev.platform_data; /* Custom initialisation (if needed)*/ if (plat_dat->init) { - ret = plat_dat->init(pdev); + ret = plat_dat->init(pdev, plat_dat->bsp_priv); if (unlikely(ret)) - goto out_unmap; + return ret; } priv = stmmac_dvr_probe(&(pdev->dev), plat_dat, addr); - if (!priv) { + if (IS_ERR(priv)) { pr_err("%s: main driver probe failed", __func__); - goto out_unmap; + return PTR_ERR(priv); } + /* Get MAC address if available (DT) */ + if (mac) + memcpy(priv->dev->dev_addr, mac, ETH_ALEN); + /* Get the MAC information */ priv->dev->irq = platform_get_irq_byname(pdev, "macirq"); - if (priv->dev->irq == -ENXIO) { - pr_err("%s: ERROR: MAC IRQ configuration " - "information not found\n", __func__); - ret = -ENXIO; - goto out_unmap; + if (priv->dev->irq < 0) { + if (priv->dev->irq != -EPROBE_DEFER) { + netdev_err(priv->dev, + "MAC IRQ configuration information not found\n"); + } + return priv->dev->irq; } /* @@ -91,23 +254,21 @@ static int stmmac_pltfr_probe(struct platform_device *pdev) * so the driver will continue to use the mac irq (ndev->irq) */ priv->wol_irq = platform_get_irq_byname(pdev, "eth_wake_irq"); - if (priv->wol_irq == -ENXIO) + if (priv->wol_irq < 0) { + if (priv->wol_irq == -EPROBE_DEFER) + return -EPROBE_DEFER; priv->wol_irq = priv->dev->irq; + } + + priv->lpi_irq = platform_get_irq_byname(pdev, "eth_lpi"); + if (priv->lpi_irq == -EPROBE_DEFER) + return -EPROBE_DEFER; platform_set_drvdata(pdev, priv->dev); pr_debug("STMMAC platform driver registration completed"); return 0; - -out_unmap: - iounmap(addr); - platform_set_drvdata(pdev, NULL); - -out_release_region: - release_mem_region(res->start, resource_size(res)); - - return ret; } /** @@ -120,20 +281,13 @@ static int stmmac_pltfr_remove(struct platform_device *pdev) { struct net_device *ndev = platform_get_drvdata(pdev); struct stmmac_priv *priv = netdev_priv(ndev); - struct resource *res; int ret = stmmac_dvr_remove(ndev); if (priv->plat->exit) - priv->plat->exit(pdev); - - if (priv->plat->exit) - priv->plat->exit(pdev); - - platform_set_drvdata(pdev, NULL); + priv->plat->exit(pdev, priv->plat->bsp_priv); - iounmap((void *)priv->ioaddr); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(res->start, resource_size(res)); + if (priv->plat->free) + priv->plat->free(pdev, priv->plat->bsp_priv); return ret; } @@ -141,55 +295,46 @@ static int stmmac_pltfr_remove(struct platform_device *pdev) #ifdef CONFIG_PM static int stmmac_pltfr_suspend(struct device *dev) { + int ret; struct net_device *ndev = dev_get_drvdata(dev); + struct stmmac_priv *priv = netdev_priv(ndev); + struct platform_device *pdev = to_platform_device(dev); - return stmmac_suspend(ndev); -} - -static int stmmac_pltfr_resume(struct device *dev) -{ - struct net_device *ndev = dev_get_drvdata(dev); + ret = stmmac_suspend(ndev); + if (priv->plat->exit) + priv->plat->exit(pdev, priv->plat->bsp_priv); - return stmmac_resume(ndev); + return ret; } -int stmmac_pltfr_freeze(struct device *dev) +static int stmmac_pltfr_resume(struct device *dev) { struct net_device *ndev = dev_get_drvdata(dev); + struct stmmac_priv *priv = netdev_priv(ndev); + struct platform_device *pdev = to_platform_device(dev); - return stmmac_freeze(ndev); -} - -int stmmac_pltfr_restore(struct device *dev) -{ - struct net_device *ndev = dev_get_drvdata(dev); + if (priv->plat->init) + priv->plat->init(pdev, priv->plat->bsp_priv); - return stmmac_restore(ndev); + return stmmac_resume(ndev); } -static const struct dev_pm_ops stmmac_pltfr_pm_ops = { - .suspend = stmmac_pltfr_suspend, - .resume = stmmac_pltfr_resume, - .freeze = stmmac_pltfr_freeze, - .thaw = stmmac_pltfr_restore, - .restore = stmmac_pltfr_restore, -}; -#else -static const struct dev_pm_ops stmmac_pltfr_pm_ops; #endif /* CONFIG_PM */ -static struct platform_driver stmmac_driver = { +static SIMPLE_DEV_PM_OPS(stmmac_pltfr_pm_ops, + stmmac_pltfr_suspend, stmmac_pltfr_resume); + +struct platform_driver stmmac_pltfr_driver = { .probe = stmmac_pltfr_probe, .remove = stmmac_pltfr_remove, .driver = { .name = STMMAC_RESOURCE_NAME, .owner = THIS_MODULE, .pm = &stmmac_pltfr_pm_ops, + .of_match_table = of_match_ptr(stmmac_dt_ids), }, }; -module_platform_driver(stmmac_driver); - MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet PLATFORM driver"); MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>"); MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c new file mode 100644 index 00000000000..b7ad3565566 --- /dev/null +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c @@ -0,0 +1,212 @@ +/******************************************************************************* + PTP 1588 clock using the STMMAC. + + Copyright (C) 2013 Vayavya Labs Pvt Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Rayagond Kokatanur <rayagond@vayavyalabs.com> +*******************************************************************************/ +#include "stmmac.h" +#include "stmmac_ptp.h" + +/** + * stmmac_adjust_freq + * + * @ptp: pointer to ptp_clock_info structure + * @ppb: desired period change in parts ber billion + * + * Description: this function will adjust the frequency of hardware clock. + */ +static int stmmac_adjust_freq(struct ptp_clock_info *ptp, s32 ppb) +{ + struct stmmac_priv *priv = + container_of(ptp, struct stmmac_priv, ptp_clock_ops); + unsigned long flags; + u32 diff, addend; + int neg_adj = 0; + u64 adj; + + if (ppb < 0) { + neg_adj = 1; + ppb = -ppb; + } + + addend = priv->default_addend; + adj = addend; + adj *= ppb; + diff = div_u64(adj, 1000000000ULL); + addend = neg_adj ? (addend - diff) : (addend + diff); + + spin_lock_irqsave(&priv->ptp_lock, flags); + + priv->hw->ptp->config_addend(priv->ioaddr, addend); + + spin_unlock_irqrestore(&priv->ptp_lock, flags); + + return 0; +} + +/** + * stmmac_adjust_time + * + * @ptp: pointer to ptp_clock_info structure + * @delta: desired change in nanoseconds + * + * Description: this function will shift/adjust the hardware clock time. + */ +static int stmmac_adjust_time(struct ptp_clock_info *ptp, s64 delta) +{ + struct stmmac_priv *priv = + container_of(ptp, struct stmmac_priv, ptp_clock_ops); + unsigned long flags; + u32 sec, nsec; + u32 quotient, reminder; + int neg_adj = 0; + + if (delta < 0) { + neg_adj = 1; + delta = -delta; + } + + quotient = div_u64_rem(delta, 1000000000ULL, &reminder); + sec = quotient; + nsec = reminder; + + spin_lock_irqsave(&priv->ptp_lock, flags); + + priv->hw->ptp->adjust_systime(priv->ioaddr, sec, nsec, neg_adj); + + spin_unlock_irqrestore(&priv->ptp_lock, flags); + + return 0; +} + +/** + * stmmac_get_time + * + * @ptp: pointer to ptp_clock_info structure + * @ts: pointer to hold time/result + * + * Description: this function will read the current time from the + * hardware clock and store it in @ts. + */ +static int stmmac_get_time(struct ptp_clock_info *ptp, struct timespec *ts) +{ + struct stmmac_priv *priv = + container_of(ptp, struct stmmac_priv, ptp_clock_ops); + unsigned long flags; + u64 ns; + u32 reminder; + + spin_lock_irqsave(&priv->ptp_lock, flags); + + ns = priv->hw->ptp->get_systime(priv->ioaddr); + + spin_unlock_irqrestore(&priv->ptp_lock, flags); + + ts->tv_sec = div_u64_rem(ns, 1000000000ULL, &reminder); + ts->tv_nsec = reminder; + + return 0; +} + +/** + * stmmac_set_time + * + * @ptp: pointer to ptp_clock_info structure + * @ts: time value to set + * + * Description: this function will set the current time on the + * hardware clock. + */ +static int stmmac_set_time(struct ptp_clock_info *ptp, + const struct timespec *ts) +{ + struct stmmac_priv *priv = + container_of(ptp, struct stmmac_priv, ptp_clock_ops); + unsigned long flags; + + spin_lock_irqsave(&priv->ptp_lock, flags); + + priv->hw->ptp->init_systime(priv->ioaddr, ts->tv_sec, ts->tv_nsec); + + spin_unlock_irqrestore(&priv->ptp_lock, flags); + + return 0; +} + +static int stmmac_enable(struct ptp_clock_info *ptp, + struct ptp_clock_request *rq, int on) +{ + return -EOPNOTSUPP; +} + +/* structure describing a PTP hardware clock */ +static struct ptp_clock_info stmmac_ptp_clock_ops = { + .owner = THIS_MODULE, + .name = "stmmac_ptp_clock", + .max_adj = 62500000, + .n_alarm = 0, + .n_ext_ts = 0, + .n_per_out = 0, + .n_pins = 0, + .pps = 0, + .adjfreq = stmmac_adjust_freq, + .adjtime = stmmac_adjust_time, + .gettime = stmmac_get_time, + .settime = stmmac_set_time, + .enable = stmmac_enable, +}; + +/** + * stmmac_ptp_register + * @priv: driver private structure + * Description: this function will register the ptp clock driver + * to kernel. It also does some house keeping work. + */ +int stmmac_ptp_register(struct stmmac_priv *priv) +{ + spin_lock_init(&priv->ptp_lock); + priv->ptp_clock_ops = stmmac_ptp_clock_ops; + + priv->ptp_clock = ptp_clock_register(&priv->ptp_clock_ops, + priv->device); + if (IS_ERR(priv->ptp_clock)) { + priv->ptp_clock = NULL; + pr_err("ptp_clock_register() failed on %s\n", priv->dev->name); + } else + pr_debug("Added PTP HW clock successfully on %s\n", + priv->dev->name); + + return 0; +} + +/** + * stmmac_ptp_unregister + * @priv: driver private structure + * Description: this function will remove/unregister the ptp clock driver + * from the kernel. + */ +void stmmac_ptp_unregister(struct stmmac_priv *priv) +{ + if (priv->ptp_clock) { + ptp_clock_unregister(priv->ptp_clock); + pr_debug("Removed PTP HW clock successfully on %s\n", + priv->dev->name); + } +} diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h new file mode 100644 index 00000000000..3dbc047622f --- /dev/null +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h @@ -0,0 +1,74 @@ +/****************************************************************************** + PTP Header file + + Copyright (C) 2013 Vayavya Labs Pvt Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Rayagond Kokatanur <rayagond@vayavyalabs.com> +******************************************************************************/ + +#ifndef __STMMAC_PTP_H__ +#define __STMMAC_PTP_H__ + +#define STMMAC_SYSCLOCK 62500000 + +/* IEEE 1588 PTP register offsets */ +#define PTP_TCR 0x0700 /* Timestamp Control Reg */ +#define PTP_SSIR 0x0704 /* Sub-Second Increment Reg */ +#define PTP_STSR 0x0708 /* System Time – Seconds Regr */ +#define PTP_STNSR 0x070C /* System Time – Nanoseconds Reg */ +#define PTP_STSUR 0x0710 /* System Time – Seconds Update Reg */ +#define PTP_STNSUR 0x0714 /* System Time – Nanoseconds Update Reg */ +#define PTP_TAR 0x0718 /* Timestamp Addend Reg */ +#define PTP_TTSR 0x071C /* Target Time Seconds Reg */ +#define PTP_TTNSR 0x0720 /* Target Time Nanoseconds Reg */ +#define PTP_STHWSR 0x0724 /* System Time - Higher Word Seconds Reg */ +#define PTP_TSR 0x0728 /* Timestamp Status */ + +#define PTP_STNSUR_ADDSUB_SHIFT 31 + +/* PTP TCR defines */ +#define PTP_TCR_TSENA 0x00000001 /* Timestamp Enable */ +#define PTP_TCR_TSCFUPDT 0x00000002 /* Timestamp Fine/Coarse Update */ +#define PTP_TCR_TSINIT 0x00000004 /* Timestamp Initialize */ +#define PTP_TCR_TSUPDT 0x00000008 /* Timestamp Update */ +/* Timestamp Interrupt Trigger Enable */ +#define PTP_TCR_TSTRIG 0x00000010 +#define PTP_TCR_TSADDREG 0x00000020 /* Addend Reg Update */ +#define PTP_TCR_TSENALL 0x00000100 /* Enable Timestamp for All Frames */ +/* Timestamp Digital or Binary Rollover Control */ +#define PTP_TCR_TSCTRLSSR 0x00000200 + +/* Enable PTP packet Processing for Version 2 Format */ +#define PTP_TCR_TSVER2ENA 0x00000400 +/* Enable Processing of PTP over Ethernet Frames */ +#define PTP_TCR_TSIPENA 0x00000800 +/* Enable Processing of PTP Frames Sent over IPv6-UDP */ +#define PTP_TCR_TSIPV6ENA 0x00001000 +/* Enable Processing of PTP Frames Sent over IPv4-UDP */ +#define PTP_TCR_TSIPV4ENA 0x00002000 +/* Enable Timestamp Snapshot for Event Messages */ +#define PTP_TCR_TSEVNTENA 0x00004000 +/* Enable Snapshot for Messages Relevant to Master */ +#define PTP_TCR_TSMSTRENA 0x00008000 +/* Select PTP packets for Taking Snapshots */ +#define PTP_TCR_SNAPTYPSEL_1 0x00010000 +/* Enable MAC address for PTP Frame Filtering */ +#define PTP_TCR_TSENMACADDR 0x00040000 + +#endif /* __STMMAC_PTP_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c deleted file mode 100644 index 2a0e1abde7e..00000000000 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c +++ /dev/null @@ -1,134 +0,0 @@ -/******************************************************************************* - STMMAC external timer support. - - Copyright (C) 2007-2009 STMicroelectronics Ltd - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> -*******************************************************************************/ - -#include <linux/kernel.h> -#include <linux/etherdevice.h> -#include "stmmac_timer.h" - -static void stmmac_timer_handler(void *data) -{ - struct net_device *dev = (struct net_device *)data; - - stmmac_schedule(dev); -} - -#define STMMAC_TIMER_MSG(timer, freq) \ -printk(KERN_INFO "stmmac_timer: %s Timer ON (freq %dHz)\n", timer, freq); - -#if defined(CONFIG_STMMAC_RTC_TIMER) -#include <linux/rtc.h> -static struct rtc_device *stmmac_rtc; -static rtc_task_t stmmac_task; - -static void stmmac_rtc_start(unsigned int new_freq) -{ - rtc_irq_set_freq(stmmac_rtc, &stmmac_task, new_freq); - rtc_irq_set_state(stmmac_rtc, &stmmac_task, 1); -} - -static void stmmac_rtc_stop(void) -{ - rtc_irq_set_state(stmmac_rtc, &stmmac_task, 0); -} - -int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm) -{ - stmmac_task.private_data = dev; - stmmac_task.func = stmmac_timer_handler; - - stmmac_rtc = rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE); - if (stmmac_rtc == NULL) { - pr_err("open rtc device failed\n"); - return -ENODEV; - } - - rtc_irq_register(stmmac_rtc, &stmmac_task); - - /* Periodic mode is not supported */ - if ((rtc_irq_set_freq(stmmac_rtc, &stmmac_task, tm->freq) < 0)) { - pr_err("set periodic failed\n"); - rtc_irq_unregister(stmmac_rtc, &stmmac_task); - rtc_class_close(stmmac_rtc); - return -1; - } - - STMMAC_TIMER_MSG(CONFIG_RTC_HCTOSYS_DEVICE, tm->freq); - - tm->timer_start = stmmac_rtc_start; - tm->timer_stop = stmmac_rtc_stop; - - return 0; -} - -int stmmac_close_ext_timer(void) -{ - rtc_irq_set_state(stmmac_rtc, &stmmac_task, 0); - rtc_irq_unregister(stmmac_rtc, &stmmac_task); - rtc_class_close(stmmac_rtc); - return 0; -} - -#elif defined(CONFIG_STMMAC_TMU_TIMER) -#include <linux/clk.h> -#define TMU_CHANNEL "tmu2_clk" -static struct clk *timer_clock; - -static void stmmac_tmu_start(unsigned int new_freq) -{ - clk_set_rate(timer_clock, new_freq); - clk_enable(timer_clock); -} - -static void stmmac_tmu_stop(void) -{ - clk_disable(timer_clock); -} - -int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm) -{ - timer_clock = clk_get(NULL, TMU_CHANNEL); - - if (timer_clock == NULL) - return -1; - - if (tmu2_register_user(stmmac_timer_handler, (void *)dev) < 0) { - timer_clock = NULL; - return -1; - } - - STMMAC_TIMER_MSG("TMU2", tm->freq); - tm->timer_start = stmmac_tmu_start; - tm->timer_stop = stmmac_tmu_stop; - - return 0; -} - -int stmmac_close_ext_timer(void) -{ - clk_disable(timer_clock); - tmu2_unregister_user(); - clk_put(timer_clock); - return 0; -} -#endif diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h deleted file mode 100644 index 6863590d184..00000000000 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h +++ /dev/null @@ -1,42 +0,0 @@ -/******************************************************************************* - STMMAC external timer Header File. - - Copyright (C) 2007-2009 STMicroelectronics Ltd - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> -*******************************************************************************/ - -struct stmmac_timer { - void (*timer_start) (unsigned int new_freq); - void (*timer_stop) (void); - unsigned int freq; - unsigned int enable; -}; - -/* Open the HW timer device and return 0 in case of success */ -int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm); -/* Stop the timer and release it */ -int stmmac_close_ext_timer(void); -/* Function used for scheduling task within the stmmac */ -void stmmac_schedule(struct net_device *dev); - -#if defined(CONFIG_STMMAC_TMU_TIMER) -extern int tmu2_register_user(void *fnt, void *data); -extern void tmu2_unregister_user(void); -#endif |