diff options
Diffstat (limited to 'drivers/net/ethernet/mellanox/mlx4/en_main.c')
| -rw-r--r-- | drivers/net/ethernet/mellanox/mlx4/en_main.c | 66 |
1 files changed, 45 insertions, 21 deletions
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_main.c b/drivers/net/ethernet/mellanox/mlx4/en_main.c index a071cda2dd0..f953c1d7eae 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_main.c @@ -72,6 +72,12 @@ MLX4_EN_PARM_INT(pfctx, 0, "Priority based Flow Control policy on TX[7:0]." MLX4_EN_PARM_INT(pfcrx, 0, "Priority based Flow Control policy on RX[7:0]." " Per priority bit mask"); +MLX4_EN_PARM_INT(inline_thold, MAX_INLINE, + "Threshold for using inline data (range: 17-104, default: 104)"); + +#define MAX_PFC_TX 0xff +#define MAX_PFC_RX 0xff + int en_print(const char *level, const struct mlx4_en_priv *priv, const char *format, ...) { @@ -127,7 +133,7 @@ static int mlx4_en_get_profile(struct mlx4_en_dev *mdev) MLX4_EN_MAX_TX_RING_P_UP); if (params->udp_rss && !(mdev->dev->caps.flags & MLX4_DEV_CAP_FLAG_UDP_RSS)) { - mlx4_warn(mdev, "UDP RSS is not supported on this device.\n"); + mlx4_warn(mdev, "UDP RSS is not supported on this device\n"); params->udp_rss = 0; } for (i = 1; i <= MLX4_MAX_PORTS; i++) { @@ -140,6 +146,7 @@ static int mlx4_en_get_profile(struct mlx4_en_dev *mdev) params->prof[i].tx_ring_num = params->num_tx_rings_p_up * MLX4_EN_NUM_UP; params->prof[i].rss_rings = 0; + params->prof[i].inline_thold = inline_thold; } return 0; @@ -174,6 +181,9 @@ static void mlx4_en_event(struct mlx4_dev *dev, void *endev_ptr, mlx4_err(mdev, "Internal error detected, restarting device\n"); break; + case MLX4_DEV_EVENT_SLAVE_INIT: + case MLX4_DEV_EVENT_SLAVE_SHUTDOWN: + break; default: if (port < 1 || port > dev->caps.num_ports || !mdev->pndev[port]) @@ -196,6 +206,9 @@ static void mlx4_en_remove(struct mlx4_dev *dev, void *endev_ptr) if (mdev->pndev[i]) mlx4_en_destroy_netdev(mdev->pndev[i]); + if (mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_TS) + mlx4_en_remove_timestamp(mdev); + flush_workqueue(mdev->workqueue); destroy_workqueue(mdev->workqueue); (void) mlx4_mr_free(dev, &mdev->mr); @@ -238,8 +251,7 @@ static void *mlx4_en_add(struct mlx4_dev *dev) mdev->LSO_support = !!(dev->caps.flags & (1 << 15)); if (!mdev->LSO_support) - mlx4_warn(mdev, "LSO not supported, please upgrade to later " - "FW version to enable LSO\n"); + mlx4_warn(mdev, "LSO not supported, please upgrade to later FW version to enable LSO\n"); if (mlx4_mr_alloc(mdev->dev, mdev->priv_pdn, 0, ~0ull, MLX4_PERM_LOCAL_WRITE | MLX4_PERM_LOCAL_READ, @@ -255,7 +267,7 @@ static void *mlx4_en_add(struct mlx4_dev *dev) /* Build device profile according to supplied module parameters */ err = mlx4_en_get_profile(mdev); if (err) { - mlx4_err(mdev, "Bad module parameters, aborting.\n"); + mlx4_err(mdev, "Bad module parameters, aborting\n"); goto err_mr; } @@ -264,19 +276,12 @@ static void *mlx4_en_add(struct mlx4_dev *dev) mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) mdev->port_cnt++; - mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) { - if (!dev->caps.comp_pool) { - mdev->profile.prof[i].rx_ring_num = - rounddown_pow_of_two(max_t(int, MIN_RX_RINGS, - min_t(int, - dev->caps.num_comp_vectors, - DEF_RX_RINGS))); - } else { - mdev->profile.prof[i].rx_ring_num = rounddown_pow_of_two( - min_t(int, dev->caps.comp_pool/ - dev->caps.num_ports - 1 , MAX_MSIX_P_PORT - 1)); - } - } + /* Initialize time stamp mechanism */ + if (mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_TS) + mlx4_en_init_timestamp(mdev); + + /* Set default number of RX rings*/ + mlx4_en_set_num_rx_rings(mdev); /* Create our own workqueue for reset/multicast tasks * Note: we cannot use the shared workqueue because of deadlocks caused @@ -301,10 +306,6 @@ static void *mlx4_en_add(struct mlx4_dev *dev) mdev->pndev[i] = NULL; } - /* Initialize time stamp mechanism */ - if (mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_TS) - mlx4_en_init_timestamp(mdev); - return mdev; err_mr: @@ -330,8 +331,31 @@ static struct mlx4_interface mlx4_en_interface = { .protocol = MLX4_PROT_ETH, }; +static void mlx4_en_verify_params(void) +{ + if (pfctx > MAX_PFC_TX) { + pr_warn("mlx4_en: WARNING: illegal module parameter pfctx 0x%x - should be in range 0-0x%x, will be changed to default (0)\n", + pfctx, MAX_PFC_TX); + pfctx = 0; + } + + if (pfcrx > MAX_PFC_RX) { + pr_warn("mlx4_en: WARNING: illegal module parameter pfcrx 0x%x - should be in range 0-0x%x, will be changed to default (0)\n", + pfcrx, MAX_PFC_RX); + pfcrx = 0; + } + + if (inline_thold < MIN_PKT_LEN || inline_thold > MAX_INLINE) { + pr_warn("mlx4_en: WARNING: illegal module parameter inline_thold %d - should be in range %d-%d, will be changed to default (%d)\n", + inline_thold, MIN_PKT_LEN, MAX_INLINE, MAX_INLINE); + inline_thold = MAX_INLINE; + } +} + static int __init mlx4_en_init(void) { + mlx4_en_verify_params(); + return mlx4_register_interface(&mlx4_en_interface); } |