diff options
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c')
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c | 711 |
1 files changed, 493 insertions, 218 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c index 1073aea5da4..bc7c924240a 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2014 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -20,6 +20,7 @@ the file called "COPYING". Contact Information: + Linux NICS <linux.nics@intel.com> e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 @@ -45,34 +46,59 @@ static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, bool autoneg_wait_to_complete); static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, - ixgbe_link_speed speed, - bool autoneg, - bool autoneg_wait_to_complete); + ixgbe_link_speed speed, + bool autoneg_wait_to_complete); +static void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw); static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, bool autoneg_wait_to_complete); static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, - ixgbe_link_speed speed, - bool autoneg, - bool autoneg_wait_to_complete); + ixgbe_link_speed speed, + bool autoneg_wait_to_complete); static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, - ixgbe_link_speed speed, - bool autoneg, - bool autoneg_wait_to_complete); + ixgbe_link_speed speed, + bool autoneg_wait_to_complete); static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw); +static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data); +static s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data); +static s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw); +static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw); + +bool ixgbe_mng_enabled(struct ixgbe_hw *hw) +{ + u32 fwsm, manc, factps; + + fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM); + if ((fwsm & IXGBE_FWSM_MODE_MASK) != IXGBE_FWSM_FW_MODE_PT) + return false; + + manc = IXGBE_READ_REG(hw, IXGBE_MANC); + if (!(manc & IXGBE_MANC_RCV_TCO_EN)) + return false; + + factps = IXGBE_READ_REG(hw, IXGBE_FACTPS); + if (factps & IXGBE_FACTPS_MNGCG) + return false; + + return true; +} static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw) { struct ixgbe_mac_info *mac = &hw->mac; - /* enable the laser control functions for SFP+ fiber */ - if (mac->ops.get_media_type(hw) == ixgbe_media_type_fiber) { + /* enable the laser control functions for SFP+ fiber + * and MNG not enabled + */ + if ((mac->ops.get_media_type(hw) == ixgbe_media_type_fiber) && + !ixgbe_mng_enabled(hw)) { mac->ops.disable_tx_laser = - &ixgbe_disable_tx_laser_multispeed_fiber; + &ixgbe_disable_tx_laser_multispeed_fiber; mac->ops.enable_tx_laser = - &ixgbe_enable_tx_laser_multispeed_fiber; + &ixgbe_enable_tx_laser_multispeed_fiber; mac->ops.flap_tx_laser = &ixgbe_flap_tx_laser_multispeed_fiber; } else { mac->ops.disable_tx_laser = NULL; @@ -99,7 +125,6 @@ static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw) { s32 ret_val = 0; u16 list_offset, data_offset, data_value; - bool got_lock = false; if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) { ixgbe_init_mac_link_ops_82599(hw); @@ -107,23 +132,25 @@ static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw) hw->phy.ops.reset = NULL; ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset, - &data_offset); + &data_offset); if (ret_val != 0) goto setup_sfp_out; /* PHY config will finish before releasing the semaphore */ ret_val = hw->mac.ops.acquire_swfw_sync(hw, - IXGBE_GSSR_MAC_CSR_SM); + IXGBE_GSSR_MAC_CSR_SM); if (ret_val != 0) { ret_val = IXGBE_ERR_SWFW_SYNC; goto setup_sfp_out; } - hw->eeprom.ops.read(hw, ++data_offset, &data_value); + if (hw->eeprom.ops.read(hw, ++data_offset, &data_value)) + goto setup_sfp_err; while (data_value != 0xffff) { IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value); IXGBE_WRITE_FLUSH(hw); - hw->eeprom.ops.read(hw, ++data_offset, &data_value); + if (hw->eeprom.ops.read(hw, ++data_offset, &data_value)) + goto setup_sfp_err; } /* Release the semaphore */ @@ -135,30 +162,10 @@ static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw) usleep_range(hw->eeprom.semaphore_delay * 1000, hw->eeprom.semaphore_delay * 2000); - /* Need SW/FW semaphore around AUTOC writes if LESM on, - * likewise reset_pipeline requires lock as it also writes - * AUTOC. - */ - if (ixgbe_verify_lesm_fw_enabled_82599(hw)) { - ret_val = hw->mac.ops.acquire_swfw_sync(hw, - IXGBE_GSSR_MAC_CSR_SM); - if (ret_val) - goto setup_sfp_out; - - got_lock = true; - } - /* Restart DSP and set SFI mode */ - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (IXGBE_READ_REG(hw, - IXGBE_AUTOC) | IXGBE_AUTOC_LMS_10G_SERIAL)); - - ret_val = ixgbe_reset_pipeline_82599(hw); - - if (got_lock) { - hw->mac.ops.release_swfw_sync(hw, - IXGBE_GSSR_MAC_CSR_SM); - got_lock = false; - } + ret_val = hw->mac.ops.prot_autoc_write(hw, + hw->mac.orig_autoc | IXGBE_AUTOC_LMS_10G_SERIAL, + false); if (ret_val) { hw_dbg(hw, " sfp module setup not complete\n"); @@ -169,6 +176,92 @@ static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw) setup_sfp_out: return ret_val; + +setup_sfp_err: + /* Release the semaphore */ + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM); + /* Delay obtaining semaphore again to allow FW access, + * semaphore_delay is in ms usleep_range needs us. + */ + usleep_range(hw->eeprom.semaphore_delay * 1000, + hw->eeprom.semaphore_delay * 2000); + hw_err(hw, "eeprom read at offset %d failed\n", data_offset); + return IXGBE_ERR_SFP_SETUP_NOT_COMPLETE; +} + +/** + * prot_autoc_read_82599 - Hides MAC differences needed for AUTOC read + * @hw: pointer to hardware structure + * @locked: Return the if we locked for this read. + * @reg_val: Value we read from AUTOC + * + * For this part (82599) we need to wrap read-modify-writes with a possible + * FW/SW lock. It is assumed this lock will be freed with the next + * prot_autoc_write_82599(). Note, that locked can only be true in cases + * where this function doesn't return an error. + **/ +static s32 prot_autoc_read_82599(struct ixgbe_hw *hw, bool *locked, + u32 *reg_val) +{ + s32 ret_val; + + *locked = false; + /* If LESM is on then we need to hold the SW/FW semaphore. */ + if (ixgbe_verify_lesm_fw_enabled_82599(hw)) { + ret_val = hw->mac.ops.acquire_swfw_sync(hw, + IXGBE_GSSR_MAC_CSR_SM); + if (ret_val) + return IXGBE_ERR_SWFW_SYNC; + + *locked = true; + } + + *reg_val = IXGBE_READ_REG(hw, IXGBE_AUTOC); + return 0; +} + +/** + * prot_autoc_write_82599 - Hides MAC differences needed for AUTOC write + * @hw: pointer to hardware structure + * @reg_val: value to write to AUTOC + * @locked: bool to indicate whether the SW/FW lock was already taken by + * previous proc_autoc_read_82599. + * + * This part (82599) may need to hold a the SW/FW lock around all writes to + * AUTOC. Likewise after a write we need to do a pipeline reset. + **/ +static s32 prot_autoc_write_82599(struct ixgbe_hw *hw, u32 autoc, bool locked) +{ + s32 ret_val = 0; + + /* Blocked by MNG FW so bail */ + if (ixgbe_check_reset_blocked(hw)) + goto out; + + /* We only need to get the lock if: + * - We didn't do it already (in the read part of a read-modify-write) + * - LESM is enabled. + */ + if (!locked && ixgbe_verify_lesm_fw_enabled_82599(hw)) { + ret_val = hw->mac.ops.acquire_swfw_sync(hw, + IXGBE_GSSR_MAC_CSR_SM); + if (ret_val) + return IXGBE_ERR_SWFW_SYNC; + + locked = true; + } + + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc); + ret_val = ixgbe_reset_pipeline_82599(hw); + +out: + /* Free the SW/FW semaphore as we either grabbed it here or + * already had it when this function was called. + */ + if (locked) + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM); + + return ret_val; } static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw) @@ -180,6 +273,7 @@ static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw) mac->mcft_size = IXGBE_82599_MC_TBL_SIZE; mac->vft_size = IXGBE_82599_VFT_TBL_SIZE; mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES; + mac->rx_pb_size = IXGBE_82599_RX_PB_SIZE; mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES; mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES; mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw); @@ -201,6 +295,25 @@ static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw) struct ixgbe_mac_info *mac = &hw->mac; struct ixgbe_phy_info *phy = &hw->phy; s32 ret_val = 0; + u32 esdp; + + if (hw->device_id == IXGBE_DEV_ID_82599_QSFP_SF_QP) { + /* Store flag indicating I2C bus access control unit. */ + hw->phy.qsfp_shared_i2c_bus = true; + + /* Initialize access to QSFP+ I2C bus */ + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + esdp |= IXGBE_ESDP_SDP0_DIR; + esdp &= ~IXGBE_ESDP_SDP1_DIR; + esdp &= ~IXGBE_ESDP_SDP0; + esdp &= ~IXGBE_ESDP_SDP0_NATIVE; + esdp &= ~IXGBE_ESDP_SDP1_NATIVE; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); + + phy->ops.read_i2c_byte = &ixgbe_read_i2c_byte_82599; + phy->ops.write_i2c_byte = &ixgbe_write_i2c_byte_82599; + } /* Identify the PHY or SFP module */ ret_val = phy->ops.identify(hw); @@ -221,7 +334,7 @@ static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw) phy->ops.check_link = &ixgbe_check_phy_link_tnx; phy->ops.setup_link = &ixgbe_setup_phy_link_tnx; phy->ops.get_firmware_version = - &ixgbe_get_phy_firmware_version_tnx; + &ixgbe_get_phy_firmware_version_tnx; break; default: break; @@ -234,13 +347,13 @@ static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw) * ixgbe_get_link_capabilities_82599 - Determines link capabilities * @hw: pointer to hardware structure * @speed: pointer to link speed - * @negotiation: true when autoneg or autotry is enabled + * @autoneg: true when autoneg or autotry is enabled * * Determines the link capabilities by reading the AUTOC register. **/ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, - ixgbe_link_speed *speed, - bool *negotiation) + ixgbe_link_speed *speed, + bool *autoneg) { s32 status = 0; u32 autoc = 0; @@ -248,10 +361,12 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, /* Determine 1G link capabilities off of SFP+ type */ if (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 || hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 || hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) { *speed = IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = true; + *autoneg = true; goto out; } @@ -268,22 +383,22 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, switch (autoc & IXGBE_AUTOC_LMS_MASK) { case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: *speed = IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = false; + *autoneg = false; break; case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: *speed = IXGBE_LINK_SPEED_10GB_FULL; - *negotiation = false; + *autoneg = false; break; case IXGBE_AUTOC_LMS_1G_AN: *speed = IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = true; + *autoneg = true; break; case IXGBE_AUTOC_LMS_10G_SERIAL: *speed = IXGBE_LINK_SPEED_10GB_FULL; - *negotiation = false; + *autoneg = false; break; case IXGBE_AUTOC_LMS_KX4_KX_KR: @@ -295,7 +410,7 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, *speed |= IXGBE_LINK_SPEED_10GB_FULL; if (autoc & IXGBE_AUTOC_KX_SUPP) *speed |= IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = true; + *autoneg = true; break; case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII: @@ -306,12 +421,12 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, *speed |= IXGBE_LINK_SPEED_10GB_FULL; if (autoc & IXGBE_AUTOC_KX_SUPP) *speed |= IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = true; + *autoneg = true; break; case IXGBE_AUTOC_LMS_SGMII_1G_100M: *speed = IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_100_FULL; - *negotiation = false; + *autoneg = false; break; default: @@ -322,8 +437,13 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, if (hw->phy.multispeed_fiber) { *speed |= IXGBE_LINK_SPEED_10GB_FULL | - IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = true; + IXGBE_LINK_SPEED_1GB_FULL; + + /* QSFP must not enable auto-negotiation */ + if (hw->phy.media_type == ixgbe_media_type_fiber_qsfp) + *autoneg = false; + else + *autoneg = true; } out: @@ -377,6 +497,9 @@ static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw) case IXGBE_DEV_ID_82599_LS: media_type = ixgbe_media_type_fiber_lco; break; + case IXGBE_DEV_ID_82599_QSFP_SF_QP: + media_type = ixgbe_media_type_fiber_qsfp; + break; default: media_type = ixgbe_media_type_unknown; break; @@ -386,6 +509,32 @@ out: } /** + * ixgbe_stop_mac_link_on_d3_82599 - Disables link on D3 + * @hw: pointer to hardware structure + * + * Disables link, should be called during D3 power down sequence. + * + **/ +static void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw) +{ + u32 autoc2_reg, fwsm; + u16 ee_ctrl_2 = 0; + + hw->eeprom.ops.read(hw, IXGBE_EEPROM_CTRL_2, &ee_ctrl_2); + + /* Check to see if MNG FW could be enabled */ + fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM); + + if (((fwsm & IXGBE_FWSM_MODE_MASK) != IXGBE_FWSM_FW_MODE_PT) && + !hw->wol_enabled && + ee_ctrl_2 & IXGBE_EEPROM_CCD_BIT) { + autoc2_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC2); + autoc2_reg |= IXGBE_AUTOC2_LINK_DISABLE_ON_D3_MASK; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2_reg); + } +} + +/** * ixgbe_start_mac_link_82599 - Setup MAC link settings * @hw: pointer to hardware structure * @autoneg_wait_to_complete: true when waiting for completion is needed @@ -394,7 +543,7 @@ out: * Restarts the link. Performs autonegotiation if needed. **/ static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, - bool autoneg_wait_to_complete) + bool autoneg_wait_to_complete) { u32 autoc_reg; u32 links_reg; @@ -459,6 +608,10 @@ static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) { u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); + /* Blocked by MNG FW so bail */ + if (ixgbe_check_reset_blocked(hw)) + return; + /* Disable tx laser; allow 100us to go dark per spec */ esdp_reg |= IXGBE_ESDP_SDP3; IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); @@ -499,6 +652,10 @@ static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) **/ static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) { + /* Blocked by MNG FW so bail */ + if (ixgbe_check_reset_blocked(hw)) + return; + if (hw->mac.autotry_restart) { ixgbe_disable_tx_laser_multispeed_fiber(hw); ixgbe_enable_tx_laser_multispeed_fiber(hw); @@ -510,15 +667,13 @@ static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed * @hw: pointer to hardware structure * @speed: new link speed - * @autoneg: true if autonegotiation enabled * @autoneg_wait_to_complete: true when waiting for completion is needed * * Set the link speed in the AUTOC register and restarts link. **/ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, - ixgbe_link_speed speed, - bool autoneg, - bool autoneg_wait_to_complete) + ixgbe_link_speed speed, + bool autoneg_wait_to_complete) { s32 status = 0; ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN; @@ -527,11 +682,11 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); u32 i = 0; bool link_up = false; - bool negotiation; + bool autoneg = false; /* Mask off requested but non-supported speeds */ status = hw->mac.ops.get_link_capabilities(hw, &link_speed, - &negotiation); + &autoneg); if (status != 0) return status; @@ -555,22 +710,32 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, goto out; /* Set the module link speed */ - esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5); - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); - IXGBE_WRITE_FLUSH(hw); + switch (hw->phy.media_type) { + case ixgbe_media_type_fiber: + esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5); + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + IXGBE_WRITE_FLUSH(hw); + break; + case ixgbe_media_type_fiber_qsfp: + /* QSFP module automatically detects MAC link speed */ + break; + default: + hw_dbg(hw, "Unexpected media type.\n"); + break; + } /* Allow module to change analog characteristics (1G->10G) */ msleep(40); status = ixgbe_setup_mac_link_82599(hw, IXGBE_LINK_SPEED_10GB_FULL, - autoneg, autoneg_wait_to_complete); if (status != 0) return status; /* Flap the tx laser if it has not already been done */ - hw->mac.ops.flap_tx_laser(hw); + if (hw->mac.ops.flap_tx_laser) + hw->mac.ops.flap_tx_laser(hw); /* * Wait for the controller to acquire link. Per IEEE 802.3ap, @@ -607,23 +772,33 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, goto out; /* Set the module link speed */ - esdp_reg &= ~IXGBE_ESDP_SDP5; - esdp_reg |= IXGBE_ESDP_SDP5_DIR; - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); - IXGBE_WRITE_FLUSH(hw); + switch (hw->phy.media_type) { + case ixgbe_media_type_fiber: + esdp_reg &= ~IXGBE_ESDP_SDP5; + esdp_reg |= IXGBE_ESDP_SDP5_DIR; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + IXGBE_WRITE_FLUSH(hw); + break; + case ixgbe_media_type_fiber_qsfp: + /* QSFP module automatically detects MAC link speed */ + break; + default: + hw_dbg(hw, "Unexpected media type.\n"); + break; + } /* Allow module to change analog characteristics (10G->1G) */ msleep(40); status = ixgbe_setup_mac_link_82599(hw, IXGBE_LINK_SPEED_1GB_FULL, - autoneg, autoneg_wait_to_complete); if (status != 0) return status; /* Flap the tx laser if it has not already been done */ - hw->mac.ops.flap_tx_laser(hw); + if (hw->mac.ops.flap_tx_laser) + hw->mac.ops.flap_tx_laser(hw); /* Wait for the link partner to also set speed */ msleep(100); @@ -645,9 +820,8 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, */ if (speedcnt > 1) status = ixgbe_setup_mac_link_multispeed_fiber(hw, - highest_link_speed, - autoneg, - autoneg_wait_to_complete); + highest_link_speed, + autoneg_wait_to_complete); out: /* Set autoneg_advertised value based on input link speed */ @@ -666,13 +840,12 @@ out: * ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed * @hw: pointer to hardware structure * @speed: new link speed - * @autoneg: true if autonegotiation enabled * @autoneg_wait_to_complete: true when waiting for completion is needed * * Implements the Intel SmartSpeed algorithm. **/ static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, - ixgbe_link_speed speed, bool autoneg, + ixgbe_link_speed speed, bool autoneg_wait_to_complete) { s32 status = 0; @@ -703,7 +876,7 @@ static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, /* First, try to get link with full advertisement */ hw->phy.smart_speed_active = false; for (j = 0; j < IXGBE_SMARTSPEED_MAX_RETRIES; j++) { - status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, + status = ixgbe_setup_mac_link_82599(hw, speed, autoneg_wait_to_complete); if (status != 0) goto out; @@ -738,7 +911,7 @@ static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, /* Turn SmartSpeed on to disable KR support */ hw->phy.smart_speed_active = true; - status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, + status = ixgbe_setup_mac_link_82599(hw, speed, autoneg_wait_to_complete); if (status != 0) goto out; @@ -764,13 +937,12 @@ static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, /* We didn't get link. Turn SmartSpeed back off. */ hw->phy.smart_speed_active = false; - status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, + status = ixgbe_setup_mac_link_82599(hw, speed, autoneg_wait_to_complete); out: if (link_up && (link_speed == IXGBE_LINK_SPEED_1GB_FULL)) - hw_dbg(hw, "Smartspeed has downgraded the link speed from " - "the maximum advertised\n"); + hw_dbg(hw, "Smartspeed has downgraded the link speed from the maximum advertised\n"); return status; } @@ -778,27 +950,27 @@ out: * ixgbe_setup_mac_link_82599 - Set MAC link speed * @hw: pointer to hardware structure * @speed: new link speed - * @autoneg: true if autonegotiation enabled * @autoneg_wait_to_complete: true when waiting for completion is needed * * Set the link speed in the AUTOC register and restarts link. **/ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, - ixgbe_link_speed speed, bool autoneg, - bool autoneg_wait_to_complete) + ixgbe_link_speed speed, + bool autoneg_wait_to_complete) { + bool autoneg = false; s32 status = 0; - u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 pma_pmd_1g, link_mode, links_reg, i; u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); - u32 start_autoc = autoc; - u32 orig_autoc = 0; - u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK; - u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK; - u32 links_reg; - u32 i; ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN; - bool got_lock = false; + + /* holds the value of AUTOC register at this current point in time */ + u32 current_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + /* holds the cached value of AUTOC register */ + u32 orig_autoc = 0; + /* temporary variable used for comparison purposes */ + u32 autoc = current_autoc; /* Check to see if speed passed in is supported. */ status = hw->mac.ops.get_link_capabilities(hw, &link_capabilities, @@ -819,6 +991,9 @@ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, else orig_autoc = autoc; + link_mode = autoc & IXGBE_AUTOC_LMS_MASK; + pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; + if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR || link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { @@ -834,8 +1009,8 @@ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, if (speed & IXGBE_LINK_SPEED_1GB_FULL) autoc |= IXGBE_AUTOC_KX_SUPP; } else if ((pma_pmd_1g == IXGBE_AUTOC_1G_SFI) && - (link_mode == IXGBE_AUTOC_LMS_1G_LINK_NO_AN || - link_mode == IXGBE_AUTOC_LMS_1G_AN)) { + (link_mode == IXGBE_AUTOC_LMS_1G_LINK_NO_AN || + link_mode == IXGBE_AUTOC_LMS_1G_AN)) { /* Switch from 1G SFI to 10G SFI if requested */ if ((speed == IXGBE_LINK_SPEED_10GB_FULL) && (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)) { @@ -843,7 +1018,7 @@ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, autoc |= IXGBE_AUTOC_LMS_10G_SERIAL; } } else if ((pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) && - (link_mode == IXGBE_AUTOC_LMS_10G_SERIAL)) { + (link_mode == IXGBE_AUTOC_LMS_10G_SERIAL)) { /* Switch from 10G SFI to 1G SFI if requested */ if ((speed == IXGBE_LINK_SPEED_1GB_FULL) && (pma_pmd_1g == IXGBE_AUTOC_1G_SFI)) { @@ -855,27 +1030,11 @@ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, } } - if (autoc != start_autoc) { - /* Need SW/FW semaphore around AUTOC writes if LESM is on, - * likewise reset_pipeline requires us to hold this lock as - * it also writes to AUTOC. - */ - if (ixgbe_verify_lesm_fw_enabled_82599(hw)) { - status = hw->mac.ops.acquire_swfw_sync(hw, - IXGBE_GSSR_MAC_CSR_SM); - if (status != 0) - goto out; - - got_lock = true; - } - + if (autoc != current_autoc) { /* Restart link */ - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc); - ixgbe_reset_pipeline_82599(hw); - - if (got_lock) - hw->mac.ops.release_swfw_sync(hw, - IXGBE_GSSR_MAC_CSR_SM); + status = hw->mac.ops.prot_autoc_write(hw, autoc, false); + if (status) + goto out; /* Only poll for autoneg to complete if specified to do so */ if (autoneg_wait_to_complete) { @@ -892,9 +1051,8 @@ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, } if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { status = - IXGBE_ERR_AUTONEG_NOT_COMPLETE; - hw_dbg(hw, "Autoneg did not " - "complete.\n"); + IXGBE_ERR_AUTONEG_NOT_COMPLETE; + hw_dbg(hw, "Autoneg did not complete.\n"); } } } @@ -911,21 +1069,19 @@ out: * ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field * @hw: pointer to hardware structure * @speed: new link speed - * @autoneg: true if autonegotiation enabled * @autoneg_wait_to_complete: true if waiting is needed to complete * * Restarts link on PHY and MAC based on settings passed in. **/ static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, - ixgbe_link_speed speed, - bool autoneg, - bool autoneg_wait_to_complete) + ixgbe_link_speed speed, + bool autoneg_wait_to_complete) { s32 status; /* Setup the PHY according to input speed */ - status = hw->phy.ops.setup_link_speed(hw, speed, autoneg, - autoneg_wait_to_complete); + status = hw->phy.ops.setup_link_speed(hw, speed, + autoneg_wait_to_complete); /* Set up MAC */ ixgbe_start_mac_link_82599(hw, autoneg_wait_to_complete); @@ -945,6 +1101,7 @@ static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw) ixgbe_link_speed link_speed; s32 status; u32 ctrl, i, autoc, autoc2; + u32 curr_lms; bool link_up = false; /* Call adapter stop to disable tx/rx and clear interrupts */ @@ -976,6 +1133,9 @@ static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw) if (hw->phy.reset_disable == false && hw->phy.ops.reset != NULL) hw->phy.ops.reset(hw); + /* remember AUTOC from before we reset */ + curr_lms = IXGBE_READ_REG(hw, IXGBE_AUTOC) & IXGBE_AUTOC_LMS_MASK; + mac_reset_top: /* * Issue global reset to the MAC. Needs to be SW reset if link is up. @@ -1026,39 +1186,45 @@ mac_reset_top: */ autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); + + /* Enable link if disabled in NVM */ + if (autoc2 & IXGBE_AUTOC2_LINK_DISABLE_MASK) { + autoc2 &= ~IXGBE_AUTOC2_LINK_DISABLE_MASK; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2); + IXGBE_WRITE_FLUSH(hw); + } + if (hw->mac.orig_link_settings_stored == false) { hw->mac.orig_autoc = autoc; hw->mac.orig_autoc2 = autoc2; hw->mac.orig_link_settings_stored = true; } else { - if (autoc != hw->mac.orig_autoc) { - /* Need SW/FW semaphore around AUTOC writes if LESM is - * on, likewise reset_pipeline requires us to hold - * this lock as it also writes to AUTOC. - */ - bool got_lock = false; - if (ixgbe_verify_lesm_fw_enabled_82599(hw)) { - status = hw->mac.ops.acquire_swfw_sync(hw, - IXGBE_GSSR_MAC_CSR_SM); - if (status) - goto reset_hw_out; - got_lock = true; - } - - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, hw->mac.orig_autoc); - ixgbe_reset_pipeline_82599(hw); + /* If MNG FW is running on a multi-speed device that + * doesn't autoneg with out driver support we need to + * leave LMS in the state it was before we MAC reset. + * Likewise if we support WoL we don't want change the + * LMS state either. + */ + if ((hw->phy.multispeed_fiber && ixgbe_mng_enabled(hw)) || + hw->wol_enabled) + hw->mac.orig_autoc = + (hw->mac.orig_autoc & ~IXGBE_AUTOC_LMS_MASK) | + curr_lms; - if (got_lock) - hw->mac.ops.release_swfw_sync(hw, - IXGBE_GSSR_MAC_CSR_SM); + if (autoc != hw->mac.orig_autoc) { + status = hw->mac.ops.prot_autoc_write(hw, + hw->mac.orig_autoc, + false); + if (status) + goto reset_hw_out; } if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) != (hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) { autoc2 &= ~IXGBE_AUTOC2_UPPER_MASK; autoc2 |= (hw->mac.orig_autoc2 & - IXGBE_AUTOC2_UPPER_MASK); + IXGBE_AUTOC2_UPPER_MASK); IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2); } } @@ -1080,7 +1246,7 @@ mac_reset_top: /* Add the SAN MAC address to the RAR only if it's a valid address */ if (is_valid_ether_addr(hw->mac.san_addr)) { hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1, - hw->mac.san_addr, 0, IXGBE_RAH_AV); + hw->mac.san_addr, 0, IXGBE_RAH_AV); /* Save the SAN MAC RAR index */ hw->mac.san_mac_rar_index = hw->mac.num_rar_entries - 1; @@ -1091,7 +1257,7 @@ mac_reset_top: /* Store the alternative WWNN/WWPN prefix */ hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix, - &hw->mac.wwpn_prefix); + &hw->mac.wwpn_prefix); reset_hw_out: return status; @@ -1105,6 +1271,7 @@ s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw) { int i; u32 fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL); + fdirctrl &= ~IXGBE_FDIRCTRL_INIT_DONE; /* @@ -1118,8 +1285,7 @@ s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw) udelay(10); } if (i >= IXGBE_FDIRCMD_CMD_POLL) { - hw_dbg(hw, "Flow Director previous command isn't complete, " - "aborting table re-initialization.\n"); + hw_dbg(hw, "Flow Director previous command isn't complete, aborting table re-initialization.\n"); return IXGBE_ERR_FDIR_REINIT_FAILED; } @@ -1133,12 +1299,12 @@ s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw) * - write 0 to bit 8 of FDIRCMD register */ IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, - (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) | - IXGBE_FDIRCMD_CLEARHT)); + (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) | + IXGBE_FDIRCMD_CLEARHT)); IXGBE_WRITE_FLUSH(hw); IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, - (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) & - ~IXGBE_FDIRCMD_CLEARHT)); + (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) & + ~IXGBE_FDIRCMD_CLEARHT)); IXGBE_WRITE_FLUSH(hw); /* * Clear FDIR Hash register to clear any leftover hashes @@ -1153,7 +1319,7 @@ s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw) /* Poll init-done after we write FDIRCTRL register */ for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) { if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) & - IXGBE_FDIRCTRL_INIT_DONE) + IXGBE_FDIRCTRL_INIT_DONE) break; usleep_range(1000, 2000); } @@ -1202,7 +1368,7 @@ static void ixgbe_fdir_enable_82599(struct ixgbe_hw *hw, u32 fdirctrl) IXGBE_WRITE_FLUSH(hw); for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) { if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) & - IXGBE_FDIRCTRL_INIT_DONE) + IXGBE_FDIRCTRL_INIT_DONE) break; usleep_range(1000, 2000); } @@ -1287,7 +1453,7 @@ do { \ bucket_hash ^= hi_hash_dword >> n; \ else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << (n + 16))) \ sig_hash ^= hi_hash_dword << (16 - n); \ -} while (0); +} while (0) /** * ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash @@ -1363,9 +1529,9 @@ static u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input, * @queue: queue index to direct traffic to **/ s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw, - union ixgbe_atr_hash_dword input, - union ixgbe_atr_hash_dword common, - u8 queue) + union ixgbe_atr_hash_dword input, + union ixgbe_atr_hash_dword common, + u8 queue) { u64 fdirhashcmd; u32 fdircmd; @@ -1389,7 +1555,7 @@ s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw, /* configure FDIRCMD register */ fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE | - IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN; + IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN; fdircmd |= input.formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT; fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT; @@ -1413,7 +1579,7 @@ do { \ bucket_hash ^= lo_hash_dword >> n; \ if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \ bucket_hash ^= hi_hash_dword >> n; \ -} while (0); +} while (0) /** * ixgbe_atr_compute_perfect_hash_82599 - Compute the perfect filter hash @@ -1431,35 +1597,20 @@ void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input, { u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan; - u32 bucket_hash = 0; + u32 bucket_hash = 0, hi_dword = 0; + int i; /* Apply masks to input data */ - input->dword_stream[0] &= input_mask->dword_stream[0]; - input->dword_stream[1] &= input_mask->dword_stream[1]; - input->dword_stream[2] &= input_mask->dword_stream[2]; - input->dword_stream[3] &= input_mask->dword_stream[3]; - input->dword_stream[4] &= input_mask->dword_stream[4]; - input->dword_stream[5] &= input_mask->dword_stream[5]; - input->dword_stream[6] &= input_mask->dword_stream[6]; - input->dword_stream[7] &= input_mask->dword_stream[7]; - input->dword_stream[8] &= input_mask->dword_stream[8]; - input->dword_stream[9] &= input_mask->dword_stream[9]; - input->dword_stream[10] &= input_mask->dword_stream[10]; + for (i = 0; i <= 10; i++) + input->dword_stream[i] &= input_mask->dword_stream[i]; /* record the flow_vm_vlan bits as they are a key part to the hash */ flow_vm_vlan = ntohl(input->dword_stream[0]); /* generate common hash dword */ - hi_hash_dword = ntohl(input->dword_stream[1] ^ - input->dword_stream[2] ^ - input->dword_stream[3] ^ - input->dword_stream[4] ^ - input->dword_stream[5] ^ - input->dword_stream[6] ^ - input->dword_stream[7] ^ - input->dword_stream[8] ^ - input->dword_stream[9] ^ - input->dword_stream[10]); + for (i = 1; i <= 10; i++) + hi_dword ^= input->dword_stream[i]; + hi_hash_dword = ntohl(hi_dword); /* low dword is word swapped version of common */ lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16); @@ -1478,21 +1629,8 @@ void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input, lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16); /* Process remaining 30 bit of the key */ - IXGBE_COMPUTE_BKT_HASH_ITERATION(1); - IXGBE_COMPUTE_BKT_HASH_ITERATION(2); - IXGBE_COMPUTE_BKT_HASH_ITERATION(3); - IXGBE_COMPUTE_BKT_HASH_ITERATION(4); - IXGBE_COMPUTE_BKT_HASH_ITERATION(5); - IXGBE_COMPUTE_BKT_HASH_ITERATION(6); - IXGBE_COMPUTE_BKT_HASH_ITERATION(7); - IXGBE_COMPUTE_BKT_HASH_ITERATION(8); - IXGBE_COMPUTE_BKT_HASH_ITERATION(9); - IXGBE_COMPUTE_BKT_HASH_ITERATION(10); - IXGBE_COMPUTE_BKT_HASH_ITERATION(11); - IXGBE_COMPUTE_BKT_HASH_ITERATION(12); - IXGBE_COMPUTE_BKT_HASH_ITERATION(13); - IXGBE_COMPUTE_BKT_HASH_ITERATION(14); - IXGBE_COMPUTE_BKT_HASH_ITERATION(15); + for (i = 1; i <= 15; i++) + IXGBE_COMPUTE_BKT_HASH_ITERATION(i); /* * Limit hash to 13 bits since max bucket count is 8K. @@ -1513,6 +1651,7 @@ void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input, static u32 ixgbe_get_fdirtcpm_82599(union ixgbe_atr_input *input_mask) { u32 mask = ntohs(input_mask->formatted.dst_port); + mask <<= IXGBE_FDIRTCPM_DPORTM_SHIFT; mask |= ntohs(input_mask->formatted.src_port); mask = ((mask & 0x55555555) << 1) | ((mask & 0xAAAAAAAA) >> 1); @@ -1747,7 +1886,7 @@ static s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val) u32 core_ctl; IXGBE_WRITE_REG(hw, IXGBE_CORECTL, IXGBE_CORECTL_WRITE_CMD | - (reg << 8)); + (reg << 8)); IXGBE_WRITE_FLUSH(hw); udelay(10); core_ctl = IXGBE_READ_REG(hw, IXGBE_CORECTL); @@ -1798,7 +1937,6 @@ static s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw) /* We need to run link autotry after the driver loads */ hw->mac.autotry_restart = true; - hw->mac.rx_pb_size = IXGBE_82599_RX_PB_SIZE; if (ret_val == 0) ret_val = ixgbe_verify_fw_version_82599(hw); @@ -1825,7 +1963,7 @@ static s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw) if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper) goto out; else - status = ixgbe_identify_sfp_module_generic(hw); + status = ixgbe_identify_module_generic(hw); } /* Set PHY type none if no PHY detected */ @@ -1931,10 +2069,12 @@ sfp_check: switch (hw->phy.type) { case ixgbe_phy_sfp_passive_tyco: case ixgbe_phy_sfp_passive_unknown: + case ixgbe_phy_qsfp_passive_unknown: physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; break; case ixgbe_phy_sfp_ftl_active: case ixgbe_phy_sfp_active_unknown: + case ixgbe_phy_qsfp_active_unknown: physical_layer = IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA; break; case ixgbe_phy_sfp_avago: @@ -1952,6 +2092,15 @@ sfp_check: else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE) physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T; break; + case ixgbe_phy_qsfp_intel: + case ixgbe_phy_qsfp_unknown: + hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_QSFP_10GBE_COMP, &comp_codes_10g); + if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; + else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; + break; default: break; } @@ -1998,6 +2147,7 @@ static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw) { s32 status = IXGBE_ERR_EEPROM_VERSION; u16 fw_offset, fw_ptp_cfg_offset; + u16 offset; u16 fw_version = 0; /* firmware check is only necessary for SFI devices */ @@ -2007,29 +2157,35 @@ static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw) } /* get the offset to the Firmware Module block */ - hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset); + offset = IXGBE_FW_PTR; + if (hw->eeprom.ops.read(hw, offset, &fw_offset)) + goto fw_version_err; if ((fw_offset == 0) || (fw_offset == 0xFFFF)) goto fw_version_out; /* get the offset to the Pass Through Patch Configuration block */ - hw->eeprom.ops.read(hw, (fw_offset + - IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR), - &fw_ptp_cfg_offset); + offset = fw_offset + IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR; + if (hw->eeprom.ops.read(hw, offset, &fw_ptp_cfg_offset)) + goto fw_version_err; if ((fw_ptp_cfg_offset == 0) || (fw_ptp_cfg_offset == 0xFFFF)) goto fw_version_out; /* get the firmware version */ - hw->eeprom.ops.read(hw, (fw_ptp_cfg_offset + - IXGBE_FW_PATCH_VERSION_4), - &fw_version); + offset = fw_ptp_cfg_offset + IXGBE_FW_PATCH_VERSION_4; + if (hw->eeprom.ops.read(hw, offset, &fw_version)) + goto fw_version_err; if (fw_version > 0x5) status = 0; fw_version_out: return status; + +fw_version_err: + hw_err(hw, "eeprom read at offset %d failed\n", offset); + return IXGBE_ERR_EEPROM_VERSION; } /** @@ -2039,7 +2195,7 @@ fw_version_out: * Returns true if the LESM FW module is present and enabled. Otherwise * returns false. Smart Speed must be disabled if LESM FW module is enabled. **/ -bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw) +static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw) { bool lesm_enabled = false; u16 fw_offset, fw_lesm_param_offset, fw_lesm_state; @@ -2145,16 +2301,26 @@ static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw, * full pipeline reset. Note - We must hold the SW/FW semaphore before writing * to AUTOC, so this function assumes the semaphore is held. **/ -s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw) +static s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw) { - s32 i, autoc_reg, ret_val; - s32 anlp1_reg = 0; + s32 ret_val; + u32 anlp1_reg = 0; + u32 i, autoc_reg, autoc2_reg; + + /* Enable link if disabled in NVM */ + autoc2_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC2); + if (autoc2_reg & IXGBE_AUTOC2_LINK_DISABLE_MASK) { + autoc2_reg &= ~IXGBE_AUTOC2_LINK_DISABLE_MASK; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2_reg); + IXGBE_WRITE_FLUSH(hw); + } autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); autoc_reg |= IXGBE_AUTOC_AN_RESTART; /* Write AUTOC register with toggled LMS[2] bit and Restart_AN */ - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg ^ IXGBE_AUTOC_LMS_1G_AN); + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, + autoc_reg ^ (0x4 << IXGBE_AUTOC_LMS_SHIFT)); /* Wait for AN to leave state 0 */ for (i = 0; i < 10; i++) { @@ -2180,6 +2346,112 @@ reset_pipeline_out: return ret_val; } +/** + * ixgbe_read_i2c_byte_82599 - Reads 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to read + * @data: value read + * + * Performs byte read operation to SFP module's EEPROM over I2C interface at + * a specified device address. + **/ +static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data) +{ + u32 esdp; + s32 status; + s32 timeout = 200; + + if (hw->phy.qsfp_shared_i2c_bus == true) { + /* Acquire I2C bus ownership. */ + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + esdp |= IXGBE_ESDP_SDP0; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); + + while (timeout) { + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + if (esdp & IXGBE_ESDP_SDP1) + break; + + usleep_range(5000, 10000); + timeout--; + } + + if (!timeout) { + hw_dbg(hw, "Driver can't access resource, acquiring I2C bus timeout.\n"); + status = IXGBE_ERR_I2C; + goto release_i2c_access; + } + } + + status = ixgbe_read_i2c_byte_generic(hw, byte_offset, dev_addr, data); + +release_i2c_access: + if (hw->phy.qsfp_shared_i2c_bus == true) { + /* Release I2C bus ownership. */ + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + esdp &= ~IXGBE_ESDP_SDP0; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); + } + + return status; +} + +/** + * ixgbe_write_i2c_byte_82599 - Writes 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @data: value to write + * + * Performs byte write operation to SFP module's EEPROM over I2C interface at + * a specified device address. + **/ +static s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data) +{ + u32 esdp; + s32 status; + s32 timeout = 200; + + if (hw->phy.qsfp_shared_i2c_bus == true) { + /* Acquire I2C bus ownership. */ + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + esdp |= IXGBE_ESDP_SDP0; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); + + while (timeout) { + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + if (esdp & IXGBE_ESDP_SDP1) + break; + + usleep_range(5000, 10000); + timeout--; + } + + if (!timeout) { + hw_dbg(hw, "Driver can't access resource, acquiring I2C bus timeout.\n"); + status = IXGBE_ERR_I2C; + goto release_i2c_access; + } + } + + status = ixgbe_write_i2c_byte_generic(hw, byte_offset, dev_addr, data); + +release_i2c_access: + if (hw->phy.qsfp_shared_i2c_bus == true) { + /* Release I2C bus ownership. */ + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + esdp &= ~IXGBE_ESDP_SDP0; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); + } + + return status; +} + static struct ixgbe_mac_operations mac_ops_82599 = { .init_hw = &ixgbe_init_hw_generic, .reset_hw = &ixgbe_reset_hw_82599, @@ -2199,6 +2471,7 @@ static struct ixgbe_mac_operations mac_ops_82599 = { .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie, .read_analog_reg8 = &ixgbe_read_analog_reg8_82599, .write_analog_reg8 = &ixgbe_write_analog_reg8_82599, + .stop_link_on_d3 = &ixgbe_stop_mac_link_on_d3_82599, .setup_link = &ixgbe_setup_mac_link_82599, .set_rxpba = &ixgbe_set_rxpba_generic, .check_link = &ixgbe_check_mac_link_generic, @@ -2228,7 +2501,8 @@ static struct ixgbe_mac_operations mac_ops_82599 = { .release_swfw_sync = &ixgbe_release_swfw_sync, .get_thermal_sensor_data = &ixgbe_get_thermal_sensor_data_generic, .init_thermal_sensor_thresh = &ixgbe_init_thermal_sensor_thresh_generic, - + .prot_autoc_read = &prot_autoc_read_82599, + .prot_autoc_write = &prot_autoc_write_82599, }; static struct ixgbe_eeprom_operations eeprom_ops_82599 = { @@ -2244,7 +2518,7 @@ static struct ixgbe_eeprom_operations eeprom_ops_82599 = { static struct ixgbe_phy_operations phy_ops_82599 = { .identify = &ixgbe_identify_phy_82599, - .identify_sfp = &ixgbe_identify_sfp_module_generic, + .identify_sfp = &ixgbe_identify_module_generic, .init = &ixgbe_init_phy_ops_82599, .reset = &ixgbe_reset_phy_generic, .read_reg = &ixgbe_read_phy_reg_generic, @@ -2253,6 +2527,7 @@ static struct ixgbe_phy_operations phy_ops_82599 = { .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, .read_i2c_byte = &ixgbe_read_i2c_byte_generic, .write_i2c_byte = &ixgbe_write_i2c_byte_generic, + .read_i2c_sff8472 = &ixgbe_read_i2c_sff8472_generic, .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic, .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic, .check_overtemp = &ixgbe_tn_check_overtemp, |