aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c')
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c122
1 files changed, 63 insertions, 59 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
index a26f3fee4f3..15609331ec1 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2013 Intel Corporation.
+ Copyright(c) 1999 - 2014 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -20,6 +20,7 @@
the file called "COPYING".
Contact Information:
+ Linux NICS <linux.nics@intel.com>
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
@@ -40,10 +41,10 @@
#define IXGBE_82598_RX_PB_SIZE 512
static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
- ixgbe_link_speed speed,
- bool autoneg_wait_to_complete);
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete);
static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
- u8 *eeprom_data);
+ u8 *eeprom_data);
/**
* ixgbe_set_pcie_completion_timeout - set pci-e completion timeout
@@ -57,10 +58,12 @@ static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
**/
static void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw)
{
- struct ixgbe_adapter *adapter = hw->back;
u32 gcr = IXGBE_READ_REG(hw, IXGBE_GCR);
u16 pcie_devctl2;
+ if (ixgbe_removed(hw->hw_addr))
+ return;
+
/* only take action if timeout value is defaulted to 0 */
if (gcr & IXGBE_GCR_CMPL_TMOUT_MASK)
goto out;
@@ -79,11 +82,9 @@ static void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw)
* directly in order to set the completion timeout value for
* 16ms to 55ms
*/
- pci_read_config_word(adapter->pdev,
- IXGBE_PCI_DEVICE_CONTROL2, &pcie_devctl2);
+ pcie_devctl2 = ixgbe_read_pci_cfg_word(hw, IXGBE_PCI_DEVICE_CONTROL2);
pcie_devctl2 |= IXGBE_PCI_DEVICE_CONTROL2_16ms;
- pci_write_config_word(adapter->pdev,
- IXGBE_PCI_DEVICE_CONTROL2, pcie_devctl2);
+ ixgbe_write_pci_cfg_word(hw, IXGBE_PCI_DEVICE_CONTROL2, pcie_devctl2);
out:
/* disable completion timeout resend */
gcr &= ~IXGBE_GCR_CMPL_TMOUT_RESEND;
@@ -100,6 +101,7 @@ static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw)
mac->mcft_size = IXGBE_82598_MC_TBL_SIZE;
mac->vft_size = IXGBE_82598_VFT_TBL_SIZE;
mac->num_rar_entries = IXGBE_82598_RAR_ENTRIES;
+ mac->rx_pb_size = IXGBE_82598_RX_PB_SIZE;
mac->max_rx_queues = IXGBE_82598_MAX_RX_QUEUES;
mac->max_tx_queues = IXGBE_82598_MAX_TX_QUEUES;
mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
@@ -138,7 +140,7 @@ static s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw)
phy->ops.setup_link = &ixgbe_setup_phy_link_tnx;
phy->ops.check_link = &ixgbe_check_phy_link_tnx;
phy->ops.get_firmware_version =
- &ixgbe_get_phy_firmware_version_tnx;
+ &ixgbe_get_phy_firmware_version_tnx;
break;
case ixgbe_phy_nl:
phy->ops.reset = &ixgbe_reset_phy_nl;
@@ -154,8 +156,8 @@ static s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw)
/* Check to see if SFP+ module is supported */
ret_val = ixgbe_get_sfp_init_sequence_offsets(hw,
- &list_offset,
- &data_offset);
+ &list_offset,
+ &data_offset);
if (ret_val != 0) {
ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED;
goto out;
@@ -201,8 +203,6 @@ static s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
}
- hw->mac.rx_pb_size = IXGBE_82598_RX_PB_SIZE;
-
/* set the completion timeout for interface */
if (ret_val == 0)
ixgbe_set_pcie_completion_timeout(hw);
@@ -219,8 +219,8 @@ static s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
* Determines the link capabilities by reading the AUTOC register.
**/
static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw,
- ixgbe_link_speed *speed,
- bool *autoneg)
+ ixgbe_link_speed *speed,
+ bool *autoneg)
{
s32 status = 0;
u32 autoc = 0;
@@ -337,19 +337,25 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw)
int i;
bool link_up;
- /*
- * Validate the water mark configuration for packet buffer 0. Zero
- * water marks indicate that the packet buffer was not configured
- * and the watermarks for packet buffer 0 should always be configured.
- */
- if (!hw->fc.low_water ||
- !hw->fc.high_water[0] ||
- !hw->fc.pause_time) {
- hw_dbg(hw, "Invalid water mark configuration\n");
+ /* Validate the water mark configuration */
+ if (!hw->fc.pause_time) {
ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
goto out;
}
+ /* Low water mark of zero causes XOFF floods */
+ for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+ if ((hw->fc.current_mode & ixgbe_fc_tx_pause) &&
+ hw->fc.high_water[i]) {
+ if (!hw->fc.low_water[i] ||
+ hw->fc.low_water[i] >= hw->fc.high_water[i]) {
+ hw_dbg(hw, "Invalid water mark configuration\n");
+ ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
+ goto out;
+ }
+ }
+ }
+
/*
* On 82598 having Rx FC on causes resets while doing 1G
* so if it's on turn it off once we know link_speed. For
@@ -432,12 +438,11 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw)
IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl_reg);
IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg);
- fcrtl = (hw->fc.low_water << 10) | IXGBE_FCRTL_XONE;
-
/* Set up and enable Rx high/low water mark thresholds, enable XON. */
for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
if ((hw->fc.current_mode & ixgbe_fc_tx_pause) &&
hw->fc.high_water[i]) {
+ fcrtl = (hw->fc.low_water[i] << 10) | IXGBE_FCRTL_XONE;
fcrth = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN;
IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), fcrtl);
IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), fcrth);
@@ -468,7 +473,7 @@ out:
* Restarts the link. Performs autonegotiation if needed.
**/
static s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw,
- bool autoneg_wait_to_complete)
+ bool autoneg_wait_to_complete)
{
u32 autoc_reg;
u32 links_reg;
@@ -550,8 +555,8 @@ static s32 ixgbe_validate_link_ready(struct ixgbe_hw *hw)
* Reads the links register to determine if link is up and the current speed
**/
static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
- ixgbe_link_speed *speed, bool *link_up,
- bool link_up_wait_to_complete)
+ ixgbe_link_speed *speed, bool *link_up,
+ bool link_up_wait_to_complete)
{
u32 links_reg;
u32 i;
@@ -567,7 +572,7 @@ static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
hw->phy.ops.read_reg(hw, 0xC79F, MDIO_MMD_PMAPMD, &link_reg);
hw->phy.ops.read_reg(hw, 0xC79F, MDIO_MMD_PMAPMD, &link_reg);
hw->phy.ops.read_reg(hw, 0xC00C, MDIO_MMD_PMAPMD,
- &adapt_comp_reg);
+ &adapt_comp_reg);
if (link_up_wait_to_complete) {
for (i = 0; i < IXGBE_LINK_UP_TIME; i++) {
if ((link_reg & 1) &&
@@ -579,11 +584,11 @@ static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
}
msleep(100);
hw->phy.ops.read_reg(hw, 0xC79F,
- MDIO_MMD_PMAPMD,
- &link_reg);
+ MDIO_MMD_PMAPMD,
+ &link_reg);
hw->phy.ops.read_reg(hw, 0xC00C,
- MDIO_MMD_PMAPMD,
- &adapt_comp_reg);
+ MDIO_MMD_PMAPMD,
+ &adapt_comp_reg);
}
} else {
if ((link_reg & 1) && ((adapt_comp_reg & 1) == 0))
@@ -656,7 +661,7 @@ static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw,
/* Set KX4/KX support according to speed requested */
else if (link_mode == IXGBE_AUTOC_LMS_KX4_AN ||
- link_mode == IXGBE_AUTOC_LMS_KX4_AN_1G_AN) {
+ link_mode == IXGBE_AUTOC_LMS_KX4_AN_1G_AN) {
autoc &= ~IXGBE_AUTOC_KX4_KX_SUPP_MASK;
if (speed & IXGBE_LINK_SPEED_10GB_FULL)
autoc |= IXGBE_AUTOC_KX4_SUPP;
@@ -689,14 +694,14 @@ static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw,
* Sets the link speed in the AUTOC register in the MAC and restarts link.
**/
static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
- ixgbe_link_speed speed,
- bool autoneg_wait_to_complete)
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete)
{
s32 status;
/* Setup the PHY according to input speed */
status = hw->phy.ops.setup_link_speed(hw, speed,
- autoneg_wait_to_complete);
+ autoneg_wait_to_complete);
/* Set up MAC */
ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete);
@@ -735,28 +740,28 @@ static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw)
if (analog_val & IXGBE_ATLAS_PDN_TX_REG_EN) {
/* Enable Tx Atlas so packets can be transmitted again */
hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK,
- &analog_val);
+ &analog_val);
analog_val &= ~IXGBE_ATLAS_PDN_TX_REG_EN;
hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK,
- analog_val);
+ analog_val);
hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G,
- &analog_val);
+ &analog_val);
analog_val &= ~IXGBE_ATLAS_PDN_TX_10G_QL_ALL;
hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G,
- analog_val);
+ analog_val);
hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G,
- &analog_val);
+ &analog_val);
analog_val &= ~IXGBE_ATLAS_PDN_TX_1G_QL_ALL;
hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G,
- analog_val);
+ analog_val);
hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN,
- &analog_val);
+ &analog_val);
analog_val &= ~IXGBE_ATLAS_PDN_TX_AN_QL_ALL;
hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN,
- analog_val);
+ analog_val);
}
/* Reset PHY */
@@ -955,7 +960,7 @@ static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw)
for (vlanbyte = 0; vlanbyte < 4; vlanbyte++)
for (offset = 0; offset < hw->mac.vft_size; offset++)
IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vlanbyte, offset),
- 0);
+ 0);
return 0;
}
@@ -973,7 +978,7 @@ static s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val)
u32 atlas_ctl;
IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL,
- IXGBE_ATLASCTL_WRITE_CMD | (reg << 8));
+ IXGBE_ATLASCTL_WRITE_CMD | (reg << 8));
IXGBE_WRITE_FLUSH(hw);
udelay(10);
atlas_ctl = IXGBE_READ_REG(hw, IXGBE_ATLASCTL);
@@ -1237,14 +1242,14 @@ static void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw)
}
/**
- * ixgbe_set_rxpba_82598 - Configure packet buffers
+ * ixgbe_set_rxpba_82598 - Initialize RX packet buffer
* @hw: pointer to hardware structure
- * @dcb_config: pointer to ixgbe_dcb_config structure
- *
- * Configure packet buffers.
- */
-static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb, u32 headroom,
- int strategy)
+ * @num_pb: number of packet buffers to allocate
+ * @headroom: reserve n KB of headroom
+ * @strategy: packet buffer allocation strategy
+ **/
+static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb,
+ u32 headroom, int strategy)
{
u32 rxpktsize = IXGBE_RXPBSIZE_64KB;
u8 i = 0;
@@ -1273,8 +1278,6 @@ static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb, u32 headroom,
/* Setup Tx packet buffer sizes */
for (i = 0; i < IXGBE_MAX_PACKET_BUFFERS; i++)
IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), IXGBE_TXPBSIZE_40KB);
-
- return;
}
static struct ixgbe_mac_operations mac_ops_82598 = {
@@ -1315,7 +1318,8 @@ static struct ixgbe_mac_operations mac_ops_82598 = {
.release_swfw_sync = &ixgbe_release_swfw_sync,
.get_thermal_sensor_data = NULL,
.init_thermal_sensor_thresh = NULL,
- .mng_fw_enabled = NULL,
+ .prot_autoc_read = &prot_autoc_read_generic,
+ .prot_autoc_write = &prot_autoc_write_generic,
};
static struct ixgbe_eeprom_operations eeprom_ops_82598 = {
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-06 00:17:22 +0000