diff options
Diffstat (limited to 'drivers/net/ethernet/intel/ixgb')
| -rw-r--r-- | drivers/net/ethernet/intel/ixgb/Makefile | 35 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgb/ixgb.h | 206 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgb/ixgb_ee.c | 605 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgb/ixgb_ee.h | 104 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgb/ixgb_ethtool.c | 660 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgb/ixgb_hw.c | 1263 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgb/ixgb_hw.h | 792 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgb/ixgb_ids.h | 48 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgb/ixgb_main.c | 2367 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgb/ixgb_osdep.h | 64 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgb/ixgb_param.c | 469 |
11 files changed, 6613 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/ixgb/Makefile b/drivers/net/ethernet/intel/ixgb/Makefile new file mode 100644 index 00000000000..0b20c5e62ff --- /dev/null +++ b/drivers/net/ethernet/intel/ixgb/Makefile @@ -0,0 +1,35 @@ +################################################################################ +# +# Intel PRO/10GbE Linux driver +# Copyright(c) 1999 - 2008 Intel Corporation. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms and conditions of the GNU General Public License, +# version 2, as published by the Free Software Foundation. +# +# This program is distributed in the hope it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# You should have received a copy of the GNU General Public License along with +# this program; if not, write to the Free Software Foundation, Inc., +# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. +# +# The full GNU General Public License is included in this distribution in +# the file called "COPYING". +# +# Contact Information: +# Linux NICS <linux.nics@intel.com> +# e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> +# Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 +# +################################################################################ + +# +# Makefile for the Intel(R) PRO/10GbE ethernet driver +# + +obj-$(CONFIG_IXGB) += ixgb.o + +ixgb-objs := ixgb_main.o ixgb_hw.o ixgb_ee.o ixgb_ethtool.o ixgb_param.o diff --git a/drivers/net/ethernet/intel/ixgb/ixgb.h b/drivers/net/ethernet/intel/ixgb/ixgb.h new file mode 100644 index 00000000000..1180cd59b57 --- /dev/null +++ b/drivers/net/ethernet/intel/ixgb/ixgb.h @@ -0,0 +1,206 @@ +/******************************************************************************* + + Intel PRO/10GbE Linux driver + Copyright(c) 1999 - 2008 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _IXGB_H_ +#define _IXGB_H_ + +#include <linux/stddef.h> +#include <linux/module.h> +#include <linux/types.h> +#include <asm/byteorder.h> +#include <linux/mm.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/delay.h> +#include <linux/timer.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> +#include <linux/interrupt.h> +#include <linux/string.h> +#include <linux/pagemap.h> +#include <linux/dma-mapping.h> +#include <linux/bitops.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <linux/capability.h> +#include <linux/in.h> +#include <linux/ip.h> +#include <linux/tcp.h> +#include <linux/udp.h> +#include <net/pkt_sched.h> +#include <linux/list.h> +#include <linux/reboot.h> +#include <net/checksum.h> + +#include <linux/ethtool.h> +#include <linux/if_vlan.h> + +#define BAR_0 0 +#define BAR_1 1 +#define BAR_5 5 + +struct ixgb_adapter; +#include "ixgb_hw.h" +#include "ixgb_ee.h" +#include "ixgb_ids.h" + +/* TX/RX descriptor defines */ +#define DEFAULT_TXD 256 +#define MAX_TXD 4096 +#define MIN_TXD 64 + +/* hardware cannot reliably support more than 512 descriptors owned by + * hardware descriptor cache otherwise an unreliable ring under heavy + * receive load may result */ +#define DEFAULT_RXD 512 +#define MAX_RXD 512 +#define MIN_RXD 64 + +/* Supported Rx Buffer Sizes */ +#define IXGB_RXBUFFER_2048 2048 +#define IXGB_RXBUFFER_4096 4096 +#define IXGB_RXBUFFER_8192 8192 +#define IXGB_RXBUFFER_16384 16384 + +/* How many Rx Buffers do we bundle into one write to the hardware ? */ +#define IXGB_RX_BUFFER_WRITE 8 /* Must be power of 2 */ + +/* wrapper around a pointer to a socket buffer, + * so a DMA handle can be stored along with the buffer */ +struct ixgb_buffer { + struct sk_buff *skb; + dma_addr_t dma; + unsigned long time_stamp; + u16 length; + u16 next_to_watch; + u16 mapped_as_page; +}; + +struct ixgb_desc_ring { + /* pointer to the descriptor ring memory */ + void *desc; + /* physical address of the descriptor ring */ + dma_addr_t dma; + /* length of descriptor ring in bytes */ + unsigned int size; + /* number of descriptors in the ring */ + unsigned int count; + /* next descriptor to associate a buffer with */ + unsigned int next_to_use; + /* next descriptor to check for DD status bit */ + unsigned int next_to_clean; + /* array of buffer information structs */ + struct ixgb_buffer *buffer_info; +}; + +#define IXGB_DESC_UNUSED(R) \ + ((((R)->next_to_clean > (R)->next_to_use) ? 0 : (R)->count) + \ + (R)->next_to_clean - (R)->next_to_use - 1) + +#define IXGB_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i])) +#define IXGB_RX_DESC(R, i) IXGB_GET_DESC(R, i, ixgb_rx_desc) +#define IXGB_TX_DESC(R, i) IXGB_GET_DESC(R, i, ixgb_tx_desc) +#define IXGB_CONTEXT_DESC(R, i) IXGB_GET_DESC(R, i, ixgb_context_desc) + +/* board specific private data structure */ + +struct ixgb_adapter { + struct timer_list watchdog_timer; + unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; + u32 bd_number; + u32 rx_buffer_len; + u32 part_num; + u16 link_speed; + u16 link_duplex; + struct work_struct tx_timeout_task; + + /* TX */ + struct ixgb_desc_ring tx_ring ____cacheline_aligned_in_smp; + unsigned int restart_queue; + unsigned long timeo_start; + u32 tx_cmd_type; + u64 hw_csum_tx_good; + u64 hw_csum_tx_error; + u32 tx_int_delay; + u32 tx_timeout_count; + bool tx_int_delay_enable; + bool detect_tx_hung; + + /* RX */ + struct ixgb_desc_ring rx_ring; + u64 hw_csum_rx_error; + u64 hw_csum_rx_good; + u32 rx_int_delay; + bool rx_csum; + + /* OS defined structs */ + struct napi_struct napi; + struct net_device *netdev; + struct pci_dev *pdev; + + /* structs defined in ixgb_hw.h */ + struct ixgb_hw hw; + u16 msg_enable; + struct ixgb_hw_stats stats; + u32 alloc_rx_buff_failed; + bool have_msi; + unsigned long flags; +}; + +enum ixgb_state_t { + /* TBD + __IXGB_TESTING, + __IXGB_RESETTING, + */ + __IXGB_DOWN +}; + +/* Exported from other modules */ +void ixgb_check_options(struct ixgb_adapter *adapter); +void ixgb_set_ethtool_ops(struct net_device *netdev); +extern char ixgb_driver_name[]; +extern const char ixgb_driver_version[]; + +void ixgb_set_speed_duplex(struct net_device *netdev); + +int ixgb_up(struct ixgb_adapter *adapter); +void ixgb_down(struct ixgb_adapter *adapter, bool kill_watchdog); +void ixgb_reset(struct ixgb_adapter *adapter); +int ixgb_setup_rx_resources(struct ixgb_adapter *adapter); +int ixgb_setup_tx_resources(struct ixgb_adapter *adapter); +void ixgb_free_rx_resources(struct ixgb_adapter *adapter); +void ixgb_free_tx_resources(struct ixgb_adapter *adapter); +void ixgb_update_stats(struct ixgb_adapter *adapter); + + +#endif /* _IXGB_H_ */ diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_ee.c b/drivers/net/ethernet/intel/ixgb/ixgb_ee.c new file mode 100644 index 00000000000..eca216b9b85 --- /dev/null +++ b/drivers/net/ethernet/intel/ixgb/ixgb_ee.c @@ -0,0 +1,605 @@ +/******************************************************************************* + + Intel PRO/10GbE Linux driver + Copyright(c) 1999 - 2008 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "ixgb_hw.h" +#include "ixgb_ee.h" +/* Local prototypes */ +static u16 ixgb_shift_in_bits(struct ixgb_hw *hw); + +static void ixgb_shift_out_bits(struct ixgb_hw *hw, + u16 data, + u16 count); +static void ixgb_standby_eeprom(struct ixgb_hw *hw); + +static bool ixgb_wait_eeprom_command(struct ixgb_hw *hw); + +static void ixgb_cleanup_eeprom(struct ixgb_hw *hw); + +/****************************************************************************** + * Raises the EEPROM's clock input. + * + * hw - Struct containing variables accessed by shared code + * eecd_reg - EECD's current value + *****************************************************************************/ +static void +ixgb_raise_clock(struct ixgb_hw *hw, + u32 *eecd_reg) +{ + /* Raise the clock input to the EEPROM (by setting the SK bit), and then + * wait 50 microseconds. + */ + *eecd_reg = *eecd_reg | IXGB_EECD_SK; + IXGB_WRITE_REG(hw, EECD, *eecd_reg); + IXGB_WRITE_FLUSH(hw); + udelay(50); +} + +/****************************************************************************** + * Lowers the EEPROM's clock input. + * + * hw - Struct containing variables accessed by shared code + * eecd_reg - EECD's current value + *****************************************************************************/ +static void +ixgb_lower_clock(struct ixgb_hw *hw, + u32 *eecd_reg) +{ + /* Lower the clock input to the EEPROM (by clearing the SK bit), and then + * wait 50 microseconds. + */ + *eecd_reg = *eecd_reg & ~IXGB_EECD_SK; + IXGB_WRITE_REG(hw, EECD, *eecd_reg); + IXGB_WRITE_FLUSH(hw); + udelay(50); +} + +/****************************************************************************** + * Shift data bits out to the EEPROM. + * + * hw - Struct containing variables accessed by shared code + * data - data to send to the EEPROM + * count - number of bits to shift out + *****************************************************************************/ +static void +ixgb_shift_out_bits(struct ixgb_hw *hw, + u16 data, + u16 count) +{ + u32 eecd_reg; + u32 mask; + + /* We need to shift "count" bits out to the EEPROM. So, value in the + * "data" parameter will be shifted out to the EEPROM one bit at a time. + * In order to do this, "data" must be broken down into bits. + */ + mask = 0x01 << (count - 1); + eecd_reg = IXGB_READ_REG(hw, EECD); + eecd_reg &= ~(IXGB_EECD_DO | IXGB_EECD_DI); + do { + /* A "1" is shifted out to the EEPROM by setting bit "DI" to a "1", + * and then raising and then lowering the clock (the SK bit controls + * the clock input to the EEPROM). A "0" is shifted out to the EEPROM + * by setting "DI" to "0" and then raising and then lowering the clock. + */ + eecd_reg &= ~IXGB_EECD_DI; + + if (data & mask) + eecd_reg |= IXGB_EECD_DI; + + IXGB_WRITE_REG(hw, EECD, eecd_reg); + IXGB_WRITE_FLUSH(hw); + + udelay(50); + + ixgb_raise_clock(hw, &eecd_reg); + ixgb_lower_clock(hw, &eecd_reg); + + mask = mask >> 1; + + } while (mask); + + /* We leave the "DI" bit set to "0" when we leave this routine. */ + eecd_reg &= ~IXGB_EECD_DI; + IXGB_WRITE_REG(hw, EECD, eecd_reg); +} + +/****************************************************************************** + * Shift data bits in from the EEPROM + * + * hw - Struct containing variables accessed by shared code + *****************************************************************************/ +static u16 +ixgb_shift_in_bits(struct ixgb_hw *hw) +{ + u32 eecd_reg; + u32 i; + u16 data; + + /* In order to read a register from the EEPROM, we need to shift 16 bits + * in from the EEPROM. Bits are "shifted in" by raising the clock input to + * the EEPROM (setting the SK bit), and then reading the value of the "DO" + * bit. During this "shifting in" process the "DI" bit should always be + * clear.. + */ + + eecd_reg = IXGB_READ_REG(hw, EECD); + + eecd_reg &= ~(IXGB_EECD_DO | IXGB_EECD_DI); + data = 0; + + for (i = 0; i < 16; i++) { + data = data << 1; + ixgb_raise_clock(hw, &eecd_reg); + + eecd_reg = IXGB_READ_REG(hw, EECD); + + eecd_reg &= ~(IXGB_EECD_DI); + if (eecd_reg & IXGB_EECD_DO) + data |= 1; + + ixgb_lower_clock(hw, &eecd_reg); + } + + return data; +} + +/****************************************************************************** + * Prepares EEPROM for access + * + * hw - Struct containing variables accessed by shared code + * + * Lowers EEPROM clock. Clears input pin. Sets the chip select pin. This + * function should be called before issuing a command to the EEPROM. + *****************************************************************************/ +static void +ixgb_setup_eeprom(struct ixgb_hw *hw) +{ + u32 eecd_reg; + + eecd_reg = IXGB_READ_REG(hw, EECD); + + /* Clear SK and DI */ + eecd_reg &= ~(IXGB_EECD_SK | IXGB_EECD_DI); + IXGB_WRITE_REG(hw, EECD, eecd_reg); + + /* Set CS */ + eecd_reg |= IXGB_EECD_CS; + IXGB_WRITE_REG(hw, EECD, eecd_reg); +} + +/****************************************************************************** + * Returns EEPROM to a "standby" state + * + * hw - Struct containing variables accessed by shared code + *****************************************************************************/ +static void +ixgb_standby_eeprom(struct ixgb_hw *hw) +{ + u32 eecd_reg; + + eecd_reg = IXGB_READ_REG(hw, EECD); + + /* Deselect EEPROM */ + eecd_reg &= ~(IXGB_EECD_CS | IXGB_EECD_SK); + IXGB_WRITE_REG(hw, EECD, eecd_reg); + IXGB_WRITE_FLUSH(hw); + udelay(50); + + /* Clock high */ + eecd_reg |= IXGB_EECD_SK; + IXGB_WRITE_REG(hw, EECD, eecd_reg); + IXGB_WRITE_FLUSH(hw); + udelay(50); + + /* Select EEPROM */ + eecd_reg |= IXGB_EECD_CS; + IXGB_WRITE_REG(hw, EECD, eecd_reg); + IXGB_WRITE_FLUSH(hw); + udelay(50); + + /* Clock low */ + eecd_reg &= ~IXGB_EECD_SK; + IXGB_WRITE_REG(hw, EECD, eecd_reg); + IXGB_WRITE_FLUSH(hw); + udelay(50); +} + +/****************************************************************************** + * Raises then lowers the EEPROM's clock pin + * + * hw - Struct containing variables accessed by shared code + *****************************************************************************/ +static void +ixgb_clock_eeprom(struct ixgb_hw *hw) +{ + u32 eecd_reg; + + eecd_reg = IXGB_READ_REG(hw, EECD); + + /* Rising edge of clock */ + eecd_reg |= IXGB_EECD_SK; + IXGB_WRITE_REG(hw, EECD, eecd_reg); + IXGB_WRITE_FLUSH(hw); + udelay(50); + + /* Falling edge of clock */ + eecd_reg &= ~IXGB_EECD_SK; + IXGB_WRITE_REG(hw, EECD, eecd_reg); + IXGB_WRITE_FLUSH(hw); + udelay(50); +} + +/****************************************************************************** + * Terminates a command by lowering the EEPROM's chip select pin + * + * hw - Struct containing variables accessed by shared code + *****************************************************************************/ +static void +ixgb_cleanup_eeprom(struct ixgb_hw *hw) +{ + u32 eecd_reg; + + eecd_reg = IXGB_READ_REG(hw, EECD); + + eecd_reg &= ~(IXGB_EECD_CS | IXGB_EECD_DI); + + IXGB_WRITE_REG(hw, EECD, eecd_reg); + + ixgb_clock_eeprom(hw); +} + +/****************************************************************************** + * Waits for the EEPROM to finish the current command. + * + * hw - Struct containing variables accessed by shared code + * + * The command is done when the EEPROM's data out pin goes high. + * + * Returns: + * true: EEPROM data pin is high before timeout. + * false: Time expired. + *****************************************************************************/ +static bool +ixgb_wait_eeprom_command(struct ixgb_hw *hw) +{ + u32 eecd_reg; + u32 i; + + /* Toggle the CS line. This in effect tells to EEPROM to actually execute + * the command in question. + */ + ixgb_standby_eeprom(hw); + + /* Now read DO repeatedly until is high (equal to '1'). The EEPROM will + * signal that the command has been completed by raising the DO signal. + * If DO does not go high in 10 milliseconds, then error out. + */ + for (i = 0; i < 200; i++) { + eecd_reg = IXGB_READ_REG(hw, EECD); + + if (eecd_reg & IXGB_EECD_DO) + return true; + + udelay(50); + } + ASSERT(0); + return false; +} + +/****************************************************************************** + * Verifies that the EEPROM has a valid checksum + * + * hw - Struct containing variables accessed by shared code + * + * Reads the first 64 16 bit words of the EEPROM and sums the values read. + * If the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is + * valid. + * + * Returns: + * true: Checksum is valid + * false: Checksum is not valid. + *****************************************************************************/ +bool +ixgb_validate_eeprom_checksum(struct ixgb_hw *hw) +{ + u16 checksum = 0; + u16 i; + + for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) + checksum += ixgb_read_eeprom(hw, i); + + if (checksum == (u16) EEPROM_SUM) + return true; + else + return false; +} + +/****************************************************************************** + * Calculates the EEPROM checksum and writes it to the EEPROM + * + * hw - Struct containing variables accessed by shared code + * + * Sums the first 63 16 bit words of the EEPROM. Subtracts the sum from 0xBABA. + * Writes the difference to word offset 63 of the EEPROM. + *****************************************************************************/ +void +ixgb_update_eeprom_checksum(struct ixgb_hw *hw) +{ + u16 checksum = 0; + u16 i; + + for (i = 0; i < EEPROM_CHECKSUM_REG; i++) + checksum += ixgb_read_eeprom(hw, i); + + checksum = (u16) EEPROM_SUM - checksum; + + ixgb_write_eeprom(hw, EEPROM_CHECKSUM_REG, checksum); +} + +/****************************************************************************** + * Writes a 16 bit word to a given offset in the EEPROM. + * + * hw - Struct containing variables accessed by shared code + * reg - offset within the EEPROM to be written to + * data - 16 bit word to be written to the EEPROM + * + * If ixgb_update_eeprom_checksum is not called after this function, the + * EEPROM will most likely contain an invalid checksum. + * + *****************************************************************************/ +void +ixgb_write_eeprom(struct ixgb_hw *hw, u16 offset, u16 data) +{ + struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; + + /* Prepare the EEPROM for writing */ + ixgb_setup_eeprom(hw); + + /* Send the 9-bit EWEN (write enable) command to the EEPROM (5-bit opcode + * plus 4-bit dummy). This puts the EEPROM into write/erase mode. + */ + ixgb_shift_out_bits(hw, EEPROM_EWEN_OPCODE, 5); + ixgb_shift_out_bits(hw, 0, 4); + + /* Prepare the EEPROM */ + ixgb_standby_eeprom(hw); + + /* Send the Write command (3-bit opcode + 6-bit addr) */ + ixgb_shift_out_bits(hw, EEPROM_WRITE_OPCODE, 3); + ixgb_shift_out_bits(hw, offset, 6); + + /* Send the data */ + ixgb_shift_out_bits(hw, data, 16); + + ixgb_wait_eeprom_command(hw); + + /* Recover from write */ + ixgb_standby_eeprom(hw); + + /* Send the 9-bit EWDS (write disable) command to the EEPROM (5-bit + * opcode plus 4-bit dummy). This takes the EEPROM out of write/erase + * mode. + */ + ixgb_shift_out_bits(hw, EEPROM_EWDS_OPCODE, 5); + ixgb_shift_out_bits(hw, 0, 4); + + /* Done with writing */ + ixgb_cleanup_eeprom(hw); + + /* clear the init_ctrl_reg_1 to signify that the cache is invalidated */ + ee_map->init_ctrl_reg_1 = cpu_to_le16(EEPROM_ICW1_SIGNATURE_CLEAR); +} + +/****************************************************************************** + * Reads a 16 bit word from the EEPROM. + * + * hw - Struct containing variables accessed by shared code + * offset - offset of 16 bit word in the EEPROM to read + * + * Returns: + * The 16-bit value read from the eeprom + *****************************************************************************/ +u16 +ixgb_read_eeprom(struct ixgb_hw *hw, + u16 offset) +{ + u16 data; + + /* Prepare the EEPROM for reading */ + ixgb_setup_eeprom(hw); + + /* Send the READ command (opcode + addr) */ + ixgb_shift_out_bits(hw, EEPROM_READ_OPCODE, 3); + /* + * We have a 64 word EEPROM, there are 6 address bits + */ + ixgb_shift_out_bits(hw, offset, 6); + + /* Read the data */ + data = ixgb_shift_in_bits(hw); + + /* End this read operation */ + ixgb_standby_eeprom(hw); + + return data; +} + +/****************************************************************************** + * Reads eeprom and stores data in shared structure. + * Validates eeprom checksum and eeprom signature. + * + * hw - Struct containing variables accessed by shared code + * + * Returns: + * true: if eeprom read is successful + * false: otherwise. + *****************************************************************************/ +bool +ixgb_get_eeprom_data(struct ixgb_hw *hw) +{ + u16 i; + u16 checksum = 0; + struct ixgb_ee_map_type *ee_map; + + ENTER(); + + ee_map = (struct ixgb_ee_map_type *)hw->eeprom; + + pr_debug("Reading eeprom data\n"); + for (i = 0; i < IXGB_EEPROM_SIZE ; i++) { + u16 ee_data; + ee_data = ixgb_read_eeprom(hw, i); + checksum += ee_data; + hw->eeprom[i] = cpu_to_le16(ee_data); + } + + if (checksum != (u16) EEPROM_SUM) { + pr_debug("Checksum invalid\n"); + /* clear the init_ctrl_reg_1 to signify that the cache is + * invalidated */ + ee_map->init_ctrl_reg_1 = cpu_to_le16(EEPROM_ICW1_SIGNATURE_CLEAR); + return false; + } + + if ((ee_map->init_ctrl_reg_1 & cpu_to_le16(EEPROM_ICW1_SIGNATURE_MASK)) + != cpu_to_le16(EEPROM_ICW1_SIGNATURE_VALID)) { + pr_debug("Signature invalid\n"); + return false; + } + + return true; +} + +/****************************************************************************** + * Local function to check if the eeprom signature is good + * If the eeprom signature is good, calls ixgb)get_eeprom_data. + * + * hw - Struct containing variables accessed by shared code + * + * Returns: + * true: eeprom signature was good and the eeprom read was successful + * false: otherwise. + ******************************************************************************/ +static bool +ixgb_check_and_get_eeprom_data (struct ixgb_hw* hw) +{ + struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; + + if ((ee_map->init_ctrl_reg_1 & cpu_to_le16(EEPROM_ICW1_SIGNATURE_MASK)) + == cpu_to_le16(EEPROM_ICW1_SIGNATURE_VALID)) { + return true; + } else { + return ixgb_get_eeprom_data(hw); + } +} + +/****************************************************************************** + * return a word from the eeprom + * + * hw - Struct containing variables accessed by shared code + * index - Offset of eeprom word + * + * Returns: + * Word at indexed offset in eeprom, if valid, 0 otherwise. + ******************************************************************************/ +__le16 +ixgb_get_eeprom_word(struct ixgb_hw *hw, u16 index) +{ + + if (index < IXGB_EEPROM_SIZE && ixgb_check_and_get_eeprom_data(hw)) + return hw->eeprom[index]; + + return 0; +} + +/****************************************************************************** + * return the mac address from EEPROM + * + * hw - Struct containing variables accessed by shared code + * mac_addr - Ethernet Address if EEPROM contents are valid, 0 otherwise + * + * Returns: None. + ******************************************************************************/ +void +ixgb_get_ee_mac_addr(struct ixgb_hw *hw, + u8 *mac_addr) +{ + int i; + struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; + + ENTER(); + + if (ixgb_check_and_get_eeprom_data(hw)) { + for (i = 0; i < ETH_ALEN; i++) { + mac_addr[i] = ee_map->mac_addr[i]; + } + pr_debug("eeprom mac address = %pM\n", mac_addr); + } +} + + +/****************************************************************************** + * return the Printed Board Assembly number from EEPROM + * + * hw - Struct containing variables accessed by shared code + * + * Returns: + * PBA number if EEPROM contents are valid, 0 otherwise + ******************************************************************************/ +u32 +ixgb_get_ee_pba_number(struct ixgb_hw *hw) +{ + if (ixgb_check_and_get_eeprom_data(hw)) + return le16_to_cpu(hw->eeprom[EEPROM_PBA_1_2_REG]) + | (le16_to_cpu(hw->eeprom[EEPROM_PBA_3_4_REG])<<16); + + return 0; +} + + +/****************************************************************************** + * return the Device Id from EEPROM + * + * hw - Struct containing variables accessed by shared code + * + * Returns: + * Device Id if EEPROM contents are valid, 0 otherwise + ******************************************************************************/ +u16 +ixgb_get_ee_device_id(struct ixgb_hw *hw) +{ + struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; + + if (ixgb_check_and_get_eeprom_data(hw)) + return le16_to_cpu(ee_map->device_id); + + return 0; +} + diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_ee.h b/drivers/net/ethernet/intel/ixgb/ixgb_ee.h new file mode 100644 index 00000000000..5680f64314b --- /dev/null +++ b/drivers/net/ethernet/intel/ixgb/ixgb_ee.h @@ -0,0 +1,104 @@ +/******************************************************************************* + + Intel PRO/10GbE Linux driver + Copyright(c) 1999 - 2008 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _IXGB_EE_H_ +#define _IXGB_EE_H_ + +#define IXGB_EEPROM_SIZE 64 /* Size in words */ + +/* EEPROM Commands */ +#define EEPROM_READ_OPCODE 0x6 /* EEPROM read opcode */ +#define EEPROM_WRITE_OPCODE 0x5 /* EEPROM write opcode */ +#define EEPROM_ERASE_OPCODE 0x7 /* EEPROM erase opcode */ +#define EEPROM_EWEN_OPCODE 0x13 /* EEPROM erase/write enable */ +#define EEPROM_EWDS_OPCODE 0x10 /* EEPROM erase/write disable */ + +/* EEPROM MAP (Word Offsets) */ +#define EEPROM_IA_1_2_REG 0x0000 +#define EEPROM_IA_3_4_REG 0x0001 +#define EEPROM_IA_5_6_REG 0x0002 +#define EEPROM_COMPATIBILITY_REG 0x0003 +#define EEPROM_PBA_1_2_REG 0x0008 +#define EEPROM_PBA_3_4_REG 0x0009 +#define EEPROM_INIT_CONTROL1_REG 0x000A +#define EEPROM_SUBSYS_ID_REG 0x000B +#define EEPROM_SUBVEND_ID_REG 0x000C +#define EEPROM_DEVICE_ID_REG 0x000D +#define EEPROM_VENDOR_ID_REG 0x000E +#define EEPROM_INIT_CONTROL2_REG 0x000F +#define EEPROM_SWDPINS_REG 0x0020 +#define EEPROM_CIRCUIT_CTRL_REG 0x0021 +#define EEPROM_D0_D3_POWER_REG 0x0022 +#define EEPROM_FLASH_VERSION 0x0032 +#define EEPROM_CHECKSUM_REG 0x003F + +/* Mask bits for fields in Word 0x0a of the EEPROM */ + +#define EEPROM_ICW1_SIGNATURE_MASK 0xC000 +#define EEPROM_ICW1_SIGNATURE_VALID 0x4000 +#define EEPROM_ICW1_SIGNATURE_CLEAR 0x0000 + +/* For checksumming, the sum of all words in the EEPROM should equal 0xBABA. */ +#define EEPROM_SUM 0xBABA + +/* EEPROM Map Sizes (Byte Counts) */ +#define PBA_SIZE 4 + +/* EEPROM Map defines (WORD OFFSETS)*/ + +/* EEPROM structure */ +struct ixgb_ee_map_type { + u8 mac_addr[ETH_ALEN]; + __le16 compatibility; + __le16 reserved1[4]; + __le32 pba_number; + __le16 init_ctrl_reg_1; + __le16 subsystem_id; + __le16 subvendor_id; + __le16 device_id; + __le16 vendor_id; + __le16 init_ctrl_reg_2; + __le16 oem_reserved[16]; + __le16 swdpins_reg; + __le16 circuit_ctrl_reg; + u8 d3_power; + u8 d0_power; + __le16 reserved2[28]; + __le16 checksum; +}; + +/* EEPROM Functions */ +u16 ixgb_read_eeprom(struct ixgb_hw *hw, u16 reg); + +bool ixgb_validate_eeprom_checksum(struct ixgb_hw *hw); + +void ixgb_update_eeprom_checksum(struct ixgb_hw *hw); + +void ixgb_write_eeprom(struct ixgb_hw *hw, u16 reg, u16 data); + +#endif /* IXGB_EE_H */ diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_ethtool.c b/drivers/net/ethernet/intel/ixgb/ixgb_ethtool.c new file mode 100644 index 00000000000..b311e9e710d --- /dev/null +++ b/drivers/net/ethernet/intel/ixgb/ixgb_ethtool.c @@ -0,0 +1,660 @@ +/******************************************************************************* + + Intel PRO/10GbE Linux driver + Copyright(c) 1999 - 2008 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +/* ethtool support for ixgb */ + +#include "ixgb.h" + +#include <asm/uaccess.h> + +#define IXGB_ALL_RAR_ENTRIES 16 + +enum {NETDEV_STATS, IXGB_STATS}; + +struct ixgb_stats { + char stat_string[ETH_GSTRING_LEN]; + int type; + int sizeof_stat; + int stat_offset; +}; + +#define IXGB_STAT(m) IXGB_STATS, \ + FIELD_SIZEOF(struct ixgb_adapter, m), \ + offsetof(struct ixgb_adapter, m) +#define IXGB_NETDEV_STAT(m) NETDEV_STATS, \ + FIELD_SIZEOF(struct net_device, m), \ + offsetof(struct net_device, m) + +static struct ixgb_stats ixgb_gstrings_stats[] = { + {"rx_packets", IXGB_NETDEV_STAT(stats.rx_packets)}, + {"tx_packets", IXGB_NETDEV_STAT(stats.tx_packets)}, + {"rx_bytes", IXGB_NETDEV_STAT(stats.rx_bytes)}, + {"tx_bytes", IXGB_NETDEV_STAT(stats.tx_bytes)}, + {"rx_errors", IXGB_NETDEV_STAT(stats.rx_errors)}, + {"tx_errors", IXGB_NETDEV_STAT(stats.tx_errors)}, + {"rx_dropped", IXGB_NETDEV_STAT(stats.rx_dropped)}, + {"tx_dropped", IXGB_NETDEV_STAT(stats.tx_dropped)}, + {"multicast", IXGB_NETDEV_STAT(stats.multicast)}, + {"collisions", IXGB_NETDEV_STAT(stats.collisions)}, + +/* { "rx_length_errors", IXGB_NETDEV_STAT(stats.rx_length_errors) }, */ + {"rx_over_errors", IXGB_NETDEV_STAT(stats.rx_over_errors)}, + {"rx_crc_errors", IXGB_NETDEV_STAT(stats.rx_crc_errors)}, + {"rx_frame_errors", IXGB_NETDEV_STAT(stats.rx_frame_errors)}, + {"rx_no_buffer_count", IXGB_STAT(stats.rnbc)}, + {"rx_fifo_errors", IXGB_NETDEV_STAT(stats.rx_fifo_errors)}, + {"rx_missed_errors", IXGB_NETDEV_STAT(stats.rx_missed_errors)}, + {"tx_aborted_errors", IXGB_NETDEV_STAT(stats.tx_aborted_errors)}, + {"tx_carrier_errors", IXGB_NETDEV_STAT(stats.tx_carrier_errors)}, + {"tx_fifo_errors", IXGB_NETDEV_STAT(stats.tx_fifo_errors)}, + {"tx_heartbeat_errors", IXGB_NETDEV_STAT(stats.tx_heartbeat_errors)}, + {"tx_window_errors", IXGB_NETDEV_STAT(stats.tx_window_errors)}, + {"tx_deferred_ok", IXGB_STAT(stats.dc)}, + {"tx_timeout_count", IXGB_STAT(tx_timeout_count) }, + {"tx_restart_queue", IXGB_STAT(restart_queue) }, + {"rx_long_length_errors", IXGB_STAT(stats.roc)}, + {"rx_short_length_errors", IXGB_STAT(stats.ruc)}, + {"tx_tcp_seg_good", IXGB_STAT(stats.tsctc)}, + {"tx_tcp_seg_failed", IXGB_STAT(stats.tsctfc)}, + {"rx_flow_control_xon", IXGB_STAT(stats.xonrxc)}, + {"rx_flow_control_xoff", IXGB_STAT(stats.xoffrxc)}, + {"tx_flow_control_xon", IXGB_STAT(stats.xontxc)}, + {"tx_flow_control_xoff", IXGB_STAT(stats.xofftxc)}, + {"rx_csum_offload_good", IXGB_STAT(hw_csum_rx_good)}, + {"rx_csum_offload_errors", IXGB_STAT(hw_csum_rx_error)}, + {"tx_csum_offload_good", IXGB_STAT(hw_csum_tx_good)}, + {"tx_csum_offload_errors", IXGB_STAT(hw_csum_tx_error)} +}; + +#define IXGB_STATS_LEN ARRAY_SIZE(ixgb_gstrings_stats) + +static int +ixgb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) +{ + struct ixgb_adapter *adapter = netdev_priv(netdev); + + ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE); + ecmd->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_FIBRE); + ecmd->port = PORT_FIBRE; + ecmd->transceiver = XCVR_EXTERNAL; + + if (netif_carrier_ok(adapter->netdev)) { + ethtool_cmd_speed_set(ecmd, SPEED_10000); + ecmd->duplex = DUPLEX_FULL; + } else { + ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN); + ecmd->duplex = DUPLEX_UNKNOWN; + } + + ecmd->autoneg = AUTONEG_DISABLE; + return 0; +} + +void ixgb_set_speed_duplex(struct net_device *netdev) +{ + struct ixgb_adapter *adapter = netdev_priv(netdev); + /* be optimistic about our link, since we were up before */ + adapter->link_speed = 10000; + adapter->link_duplex = FULL_DUPLEX; + netif_carrier_on(netdev); + netif_wake_queue(netdev); +} + +static int +ixgb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) +{ + struct ixgb_adapter *adapter = netdev_priv(netdev); + u32 speed = ethtool_cmd_speed(ecmd); + + if (ecmd->autoneg == AUTONEG_ENABLE || + (speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL)) + return -EINVAL; + + if (netif_running(adapter->netdev)) { + ixgb_down(adapter, true); + ixgb_reset(adapter); + ixgb_up(adapter); + ixgb_set_speed_duplex(netdev); + } else + ixgb_reset(adapter); + + return 0; +} + +static void +ixgb_get_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + struct ixgb_adapter *adapter = netdev_priv(netdev); + struct ixgb_hw *hw = &adapter->hw; + + pause->autoneg = AUTONEG_DISABLE; + + if (hw->fc.type == ixgb_fc_rx_pause) + pause->rx_pause = 1; + else if (hw->fc.type == ixgb_fc_tx_pause) + pause->tx_pause = 1; + else if (hw->fc.type == ixgb_fc_full) { + pause->rx_pause = 1; + pause->tx_pause = 1; + } +} + +static int +ixgb_set_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + struct ixgb_adapter *adapter = netdev_priv(netdev); + struct ixgb_hw *hw = &adapter->hw; + + if (pause->autoneg == AUTONEG_ENABLE) + return -EINVAL; + + if (pause->rx_pause && pause->tx_pause) + hw->fc.type = ixgb_fc_full; + else if (pause->rx_pause && !pause->tx_pause) + hw->fc.type = ixgb_fc_rx_pause; + else if (!pause->rx_pause && pause->tx_pause) + hw->fc.type = ixgb_fc_tx_pause; + else if (!pause->rx_pause && !pause->tx_pause) + hw->fc.type = ixgb_fc_none; + + if (netif_running(adapter->netdev)) { + ixgb_down(adapter, true); + ixgb_up(adapter); + ixgb_set_speed_duplex(netdev); + } else + ixgb_reset(adapter); + + return 0; +} + +static u32 +ixgb_get_msglevel(struct net_device *netdev) +{ + struct ixgb_adapter *adapter = netdev_priv(netdev); + return adapter->msg_enable; +} + +static void +ixgb_set_msglevel(struct net_device *netdev, u32 data) +{ + struct ixgb_adapter *adapter = netdev_priv(netdev); + adapter->msg_enable = data; +} +#define IXGB_GET_STAT(_A_, _R_) _A_->stats._R_ + +static int +ixgb_get_regs_len(struct net_device *netdev) +{ +#define IXGB_REG_DUMP_LEN 136*sizeof(u32) + return IXGB_REG_DUMP_LEN; +} + +static void +ixgb_get_regs(struct net_device *netdev, + struct ethtool_regs *regs, void *p) +{ + struct ixgb_adapter *adapter = netdev_priv(netdev); + struct ixgb_hw *hw = &adapter->hw; + u32 *reg = p; + u32 *reg_start = reg; + u8 i; + + /* the 1 (one) below indicates an attempt at versioning, if the + * interface in ethtool or the driver changes, this 1 should be + * incremented */ + regs->version = (1<<24) | hw->revision_id << 16 | hw->device_id; + + /* General Registers */ + *reg++ = IXGB_READ_REG(hw, CTRL0); /* 0 */ + *reg++ = IXGB_READ_REG(hw, CTRL1); /* 1 */ + *reg++ = IXGB_READ_REG(hw, STATUS); /* 2 */ + *reg++ = IXGB_READ_REG(hw, EECD); /* 3 */ + *reg++ = IXGB_READ_REG(hw, MFS); /* 4 */ + + /* Interrupt */ + *reg++ = IXGB_READ_REG(hw, ICR); /* 5 */ + *reg++ = IXGB_READ_REG(hw, ICS); /* 6 */ + *reg++ = IXGB_READ_REG(hw, IMS); /* 7 */ + *reg++ = IXGB_READ_REG(hw, IMC); /* 8 */ + + /* Receive */ + *reg++ = IXGB_READ_REG(hw, RCTL); /* 9 */ + *reg++ = IXGB_READ_REG(hw, FCRTL); /* 10 */ + *reg++ = IXGB_READ_REG(hw, FCRTH); /* 11 */ + *reg++ = IXGB_READ_REG(hw, RDBAL); /* 12 */ + *reg++ = IXGB_READ_REG(hw, RDBAH); /* 13 */ + *reg++ = IXGB_READ_REG(hw, RDLEN); /* 14 */ + *reg++ = IXGB_READ_REG(hw, RDH); /* 15 */ + *reg++ = IXGB_READ_REG(hw, RDT); /* 16 */ + *reg++ = IXGB_READ_REG(hw, RDTR); /* 17 */ + *reg++ = IXGB_READ_REG(hw, RXDCTL); /* 18 */ + *reg++ = IXGB_READ_REG(hw, RAIDC); /* 19 */ + *reg++ = IXGB_READ_REG(hw, RXCSUM); /* 20 */ + + /* there are 16 RAR entries in hardware, we only use 3 */ + for (i = 0; i < IXGB_ALL_RAR_ENTRIES; i++) { + *reg++ = IXGB_READ_REG_ARRAY(hw, RAL, (i << 1)); /*21,...,51 */ + *reg++ = IXGB_READ_REG_ARRAY(hw, RAH, (i << 1)); /*22,...,52 */ + } + + /* Transmit */ + *reg++ = IXGB_READ_REG(hw, TCTL); /* 53 */ + *reg++ = IXGB_READ_REG(hw, TDBAL); /* 54 */ + *reg++ = IXGB_READ_REG(hw, TDBAH); /* 55 */ + *reg++ = IXGB_READ_REG(hw, TDLEN); /* 56 */ + *reg++ = IXGB_READ_REG(hw, TDH); /* 57 */ + *reg++ = IXGB_READ_REG(hw, TDT); /* 58 */ + *reg++ = IXGB_READ_REG(hw, TIDV); /* 59 */ + *reg++ = IXGB_READ_REG(hw, TXDCTL); /* 60 */ + *reg++ = IXGB_READ_REG(hw, TSPMT); /* 61 */ + *reg++ = IXGB_READ_REG(hw, PAP); /* 62 */ + + /* Physical */ + *reg++ = IXGB_READ_REG(hw, PCSC1); /* 63 */ + *reg++ = IXGB_READ_REG(hw, PCSC2); /* 64 */ + *reg++ = IXGB_READ_REG(hw, PCSS1); /* 65 */ + *reg++ = IXGB_READ_REG(hw, PCSS2); /* 66 */ + *reg++ = IXGB_READ_REG(hw, XPCSS); /* 67 */ + *reg++ = IXGB_READ_REG(hw, UCCR); /* 68 */ + *reg++ = IXGB_READ_REG(hw, XPCSTC); /* 69 */ + *reg++ = IXGB_READ_REG(hw, MACA); /* 70 */ + *reg++ = IXGB_READ_REG(hw, APAE); /* 71 */ + *reg++ = IXGB_READ_REG(hw, ARD); /* 72 */ + *reg++ = IXGB_READ_REG(hw, AIS); /* 73 */ + *reg++ = IXGB_READ_REG(hw, MSCA); /* 74 */ + *reg++ = IXGB_READ_REG(hw, MSRWD); /* 75 */ + + /* Statistics */ + *reg++ = IXGB_GET_STAT(adapter, tprl); /* 76 */ + *reg++ = IXGB_GET_STAT(adapter, tprh); /* 77 */ + *reg++ = IXGB_GET_STAT(adapter, gprcl); /* 78 */ + *reg++ = IXGB_GET_STAT(adapter, gprch); /* 79 */ + *reg++ = IXGB_GET_STAT(adapter, bprcl); /* 80 */ + *reg++ = IXGB_GET_STAT(adapter, bprch); /* 81 */ + *reg++ = IXGB_GET_STAT(adapter, mprcl); /* 82 */ + *reg++ = IXGB_GET_STAT(adapter, mprch); /* 83 */ + *reg++ = IXGB_GET_STAT(adapter, uprcl); /* 84 */ + *reg++ = IXGB_GET_STAT(adapter, uprch); /* 85 */ + *reg++ = IXGB_GET_STAT(adapter, vprcl); /* 86 */ + *reg++ = IXGB_GET_STAT(adapter, vprch); /* 87 */ + *reg++ = IXGB_GET_STAT(adapter, jprcl); /* 88 */ + *reg++ = IXGB_GET_STAT(adapter, jprch); /* 89 */ + *reg++ = IXGB_GET_STAT(adapter, gorcl); /* 90 */ + *reg++ = IXGB_GET_STAT(adapter, gorch); /* 91 */ + *reg++ = IXGB_GET_STAT(adapter, torl); /* 92 */ + *reg++ = IXGB_GET_STAT(adapter, torh); /* 93 */ + *reg++ = IXGB_GET_STAT(adapter, rnbc); /* 94 */ + *reg++ = IXGB_GET_STAT(adapter, ruc); /* 95 */ + *reg++ = IXGB_GET_STAT(adapter, roc); /* 96 */ + *reg++ = IXGB_GET_STAT(adapter, rlec); /* 97 */ + *reg++ = IXGB_GET_STAT(adapter, crcerrs); /* 98 */ + *reg++ = IXGB_GET_STAT(adapter, icbc); /* 99 */ + *reg++ = IXGB_GET_STAT(adapter, ecbc); /* 100 */ + *reg++ = IXGB_GET_STAT(adapter, mpc); /* 101 */ + *reg++ = IXGB_GET_STAT(adapter, tptl); /* 102 */ + *reg++ = IXGB_GET_STAT(adapter, tpth); /* 103 */ + *reg++ = IXGB_GET_STAT(adapter, gptcl); /* 104 */ + *reg++ = IXGB_GET_STAT(adapter, gptch); /* 105 */ + *reg++ = IXGB_GET_STAT(adapter, bptcl); /* 106 */ + *reg++ = IXGB_GET_STAT(adapter, bptch); /* 107 */ + *reg++ = IXGB_GET_STAT(adapter, mptcl); /* 108 */ + *reg++ = IXGB_GET_STAT(adapter, mptch); /* 109 */ + *reg++ = IXGB_GET_STAT(adapter, uptcl); /* 110 */ + *reg++ = IXGB_GET_STAT(adapter, uptch); /* 111 */ + *reg++ = IXGB_GET_STAT(adapter, vptcl); /* 112 */ + *reg++ = IXGB_GET_STAT(adapter, vptch); /* 113 */ + *reg++ = IXGB_GET_STAT(adapter, jptcl); /* 114 */ + *reg++ = IXGB_GET_STAT(adapter, jptch); /* 115 */ + *reg++ = IXGB_GET_STAT(adapter, gotcl); /* 116 */ + *reg++ = IXGB_GET_STAT(adapter, gotch); /* 117 */ + *reg++ = IXGB_GET_STAT(adapter, totl); /* 118 */ + *reg++ = IXGB_GET_STAT(adapter, toth); /* 119 */ + *reg++ = IXGB_GET_STAT(adapter, dc); /* 120 */ + *reg++ = IXGB_GET_STAT(adapter, plt64c); /* 121 */ + *reg++ = IXGB_GET_STAT(adapter, tsctc); /* 122 */ + *reg++ = IXGB_GET_STAT(adapter, tsctfc); /* 123 */ + *reg++ = IXGB_GET_STAT(adapter, ibic); /* 124 */ + *reg++ = IXGB_GET_STAT(adapter, rfc); /* 125 */ + *reg++ = IXGB_GET_STAT(adapter, lfc); /* 126 */ + *reg++ = IXGB_GET_STAT(adapter, pfrc); /* 127 */ + *reg++ = IXGB_GET_STAT(adapter, pftc); /* 128 */ + *reg++ = IXGB_GET_STAT(adapter, mcfrc); /* 129 */ + *reg++ = IXGB_GET_STAT(adapter, mcftc); /* 130 */ + *reg++ = IXGB_GET_STAT(adapter, xonrxc); /* 131 */ + *reg++ = IXGB_GET_STAT(adapter, xontxc); /* 132 */ + *reg++ = IXGB_GET_STAT(adapter, xoffrxc); /* 133 */ + *reg++ = IXGB_GET_STAT(adapter, xofftxc); /* 134 */ + *reg++ = IXGB_GET_STAT(adapter, rjc); /* 135 */ + + regs->len = (reg - reg_start) * sizeof(u32); +} + +static int +ixgb_get_eeprom_len(struct net_device *netdev) +{ + /* return size in bytes */ + return IXGB_EEPROM_SIZE << 1; +} + +static int +ixgb_get_eeprom(struct net_device *netdev, + struct ethtool_eeprom *eeprom, u8 *bytes) +{ + struct ixgb_adapter *adapter = netdev_priv(netdev); + struct ixgb_hw *hw = &adapter->hw; + __le16 *eeprom_buff; + int i, max_len, first_word, last_word; + int ret_val = 0; + + if (eeprom->len == 0) { + ret_val = -EINVAL; + goto geeprom_error; + } + + eeprom->magic = hw->vendor_id | (hw->device_id << 16); + + max_len = ixgb_get_eeprom_len(netdev); + + if (eeprom->offset > eeprom->offset + eeprom->len) { + ret_val = -EINVAL; + goto geeprom_error; + } + + if ((eeprom->offset + eeprom->len) > max_len) + eeprom->len = (max_len - eeprom->offset); + + first_word = eeprom->offset >> 1; + last_word = (eeprom->offset + eeprom->len - 1) >> 1; + + eeprom_buff = kmalloc(sizeof(__le16) * + (last_word - first_word + 1), GFP_KERNEL); + if (!eeprom_buff) + return -ENOMEM; + + /* note the eeprom was good because the driver loaded */ + for (i = 0; i <= (last_word - first_word); i++) + eeprom_buff[i] = ixgb_get_eeprom_word(hw, (first_word + i)); + + memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len); + kfree(eeprom_buff); + +geeprom_error: + return ret_val; +} + +static int +ixgb_set_eeprom(struct net_device *netdev, + struct ethtool_eeprom *eeprom, u8 *bytes) +{ + struct ixgb_adapter *adapter = netdev_priv(netdev); + struct ixgb_hw *hw = &adapter->hw; + u16 *eeprom_buff; + void *ptr; + int max_len, first_word, last_word; + u16 i; + + if (eeprom->len == 0) + return -EINVAL; + + if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16))) + return -EFAULT; + + max_len = ixgb_get_eeprom_len(netdev); + + if (eeprom->offset > eeprom->offset + eeprom->len) + return -EINVAL; + + if ((eeprom->offset + eeprom->len) > max_len) + eeprom->len = (max_len - eeprom->offset); + + first_word = eeprom->offset >> 1; + last_word = (eeprom->offset + eeprom->len - 1) >> 1; + eeprom_buff = kmalloc(max_len, GFP_KERNEL); + if (!eeprom_buff) + return -ENOMEM; + + ptr = (void *)eeprom_buff; + + if (eeprom->offset & 1) { + /* need read/modify/write of first changed EEPROM word */ + /* only the second byte of the word is being modified */ + eeprom_buff[0] = ixgb_read_eeprom(hw, first_word); + ptr++; + } + if ((eeprom->offset + eeprom->len) & 1) { + /* need read/modify/write of last changed EEPROM word */ + /* only the first byte of the word is being modified */ + eeprom_buff[last_word - first_word] + = ixgb_read_eeprom(hw, last_word); + } + + memcpy(ptr, bytes, eeprom->len); + for (i = 0; i <= (last_word - first_word); i++) + ixgb_write_eeprom(hw, first_word + i, eeprom_buff[i]); + + /* Update the checksum over the first part of the EEPROM if needed */ + if (first_word <= EEPROM_CHECKSUM_REG) + ixgb_update_eeprom_checksum(hw); + + kfree(eeprom_buff); + return 0; +} + +static void +ixgb_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *drvinfo) +{ + struct ixgb_adapter *adapter = netdev_priv(netdev); + + strlcpy(drvinfo->driver, ixgb_driver_name, + sizeof(drvinfo->driver)); + strlcpy(drvinfo->version, ixgb_driver_version, + sizeof(drvinfo->version)); + strlcpy(drvinfo->bus_info, pci_name(adapter->pdev), + sizeof(drvinfo->bus_info)); + drvinfo->n_stats = IXGB_STATS_LEN; + drvinfo->regdump_len = ixgb_get_regs_len(netdev); + drvinfo->eedump_len = ixgb_get_eeprom_len(netdev); +} + +static void +ixgb_get_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring) +{ + struct ixgb_adapter *adapter = netdev_priv(netdev); + struct ixgb_desc_ring *txdr = &adapter->tx_ring; + struct ixgb_desc_ring *rxdr = &adapter->rx_ring; + + ring->rx_max_pending = MAX_RXD; + ring->tx_max_pending = MAX_TXD; + ring->rx_pending = rxdr->count; + ring->tx_pending = txdr->count; +} + +static int +ixgb_set_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring) +{ + struct ixgb_adapter *adapter = netdev_priv(netdev); + struct ixgb_desc_ring *txdr = &adapter->tx_ring; + struct ixgb_desc_ring *rxdr = &adapter->rx_ring; + struct ixgb_desc_ring tx_old, tx_new, rx_old, rx_new; + int err; + + tx_old = adapter->tx_ring; + rx_old = adapter->rx_ring; + + if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) + return -EINVAL; + + if (netif_running(adapter->netdev)) + ixgb_down(adapter, true); + + rxdr->count = max(ring->rx_pending,(u32)MIN_RXD); + rxdr->count = min(rxdr->count,(u32)MAX_RXD); + rxdr->count = ALIGN(rxdr->count, IXGB_REQ_RX_DESCRIPTOR_MULTIPLE); + + txdr->count = max(ring->tx_pending,(u32)MIN_TXD); + txdr->count = min(txdr->count,(u32)MAX_TXD); + txdr->count = ALIGN(txdr->count, IXGB_REQ_TX_DESCRIPTOR_MULTIPLE); + + if (netif_running(adapter->netdev)) { + /* Try to get new resources before deleting old */ + if ((err = ixgb_setup_rx_resources(adapter))) + goto err_setup_rx; + if ((err = ixgb_setup_tx_resources(adapter))) + goto err_setup_tx; + + /* save the new, restore the old in order to free it, + * then restore the new back again */ + + rx_new = adapter->rx_ring; + tx_new = adapter->tx_ring; + adapter->rx_ring = rx_old; + adapter->tx_ring = tx_old; + ixgb_free_rx_resources(adapter); + ixgb_free_tx_resources(adapter); + adapter->rx_ring = rx_new; + adapter->tx_ring = tx_new; + if ((err = ixgb_up(adapter))) + return err; + ixgb_set_speed_duplex(netdev); + } + + return 0; +err_setup_tx: + ixgb_free_rx_resources(adapter); +err_setup_rx: + adapter->rx_ring = rx_old; + adapter->tx_ring = tx_old; + ixgb_up(adapter); + return err; +} + +static int +ixgb_set_phys_id(struct net_device *netdev, enum ethtool_phys_id_state state) +{ + struct ixgb_adapter *adapter = netdev_priv(netdev); + + switch (state) { + case ETHTOOL_ID_ACTIVE: + return 2; + + case ETHTOOL_ID_ON: + ixgb_led_on(&adapter->hw); + break; + + case ETHTOOL_ID_OFF: + case ETHTOOL_ID_INACTIVE: + ixgb_led_off(&adapter->hw); + } + + return 0; +} + +static int +ixgb_get_sset_count(struct net_device *netdev, int sset) +{ + switch (sset) { + case ETH_SS_STATS: + return IXGB_STATS_LEN; + default: + return -EOPNOTSUPP; + } +} + +static void +ixgb_get_ethtool_stats(struct net_device *netdev, + struct ethtool_stats *stats, u64 *data) +{ + struct ixgb_adapter *adapter = netdev_priv(netdev); + int i; + char *p = NULL; + + ixgb_update_stats(adapter); + for (i = 0; i < IXGB_STATS_LEN; i++) { + switch (ixgb_gstrings_stats[i].type) { + case NETDEV_STATS: + p = (char *) netdev + + ixgb_gstrings_stats[i].stat_offset; + break; + case IXGB_STATS: + p = (char *) adapter + + ixgb_gstrings_stats[i].stat_offset; + break; + } + + data[i] = (ixgb_gstrings_stats[i].sizeof_stat == + sizeof(u64)) ? *(u64 *)p : *(u32 *)p; + } +} + +static void +ixgb_get_strings(struct net_device *netdev, u32 stringset, u8 *data) +{ + int i; + + switch(stringset) { + case ETH_SS_STATS: + for (i = 0; i < IXGB_STATS_LEN; i++) { + memcpy(data + i * ETH_GSTRING_LEN, + ixgb_gstrings_stats[i].stat_string, + ETH_GSTRING_LEN); + } + break; + } +} + +static const struct ethtool_ops ixgb_ethtool_ops = { + .get_settings = ixgb_get_settings, + .set_settings = ixgb_set_settings, + .get_drvinfo = ixgb_get_drvinfo, + .get_regs_len = ixgb_get_regs_len, + .get_regs = ixgb_get_regs, + .get_link = ethtool_op_get_link, + .get_eeprom_len = ixgb_get_eeprom_len, + .get_eeprom = ixgb_get_eeprom, + .set_eeprom = ixgb_set_eeprom, + .get_ringparam = ixgb_get_ringparam, + .set_ringparam = ixgb_set_ringparam, + .get_pauseparam = ixgb_get_pauseparam, + .set_pauseparam = ixgb_set_pauseparam, + .get_msglevel = ixgb_get_msglevel, + .set_msglevel = ixgb_set_msglevel, + .get_strings = ixgb_get_strings, + .set_phys_id = ixgb_set_phys_id, + .get_sset_count = ixgb_get_sset_count, + .get_ethtool_stats = ixgb_get_ethtool_stats, +}; + +void ixgb_set_ethtool_ops(struct net_device *netdev) +{ + netdev->ethtool_ops = &ixgb_ethtool_ops; +} diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_hw.c b/drivers/net/ethernet/intel/ixgb/ixgb_hw.c new file mode 100644 index 00000000000..bf9a220f71f --- /dev/null +++ b/drivers/net/ethernet/intel/ixgb/ixgb_hw.c @@ -0,0 +1,1263 @@ +/******************************************************************************* + + Intel PRO/10GbE Linux driver + Copyright(c) 1999 - 2008 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +/* ixgb_hw.c + * Shared functions for accessing and configuring the adapter + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/pci_ids.h> +#include "ixgb_hw.h" +#include "ixgb_ids.h" + +#include <linux/etherdevice.h> + +/* Local function prototypes */ + +static u32 ixgb_hash_mc_addr(struct ixgb_hw *hw, u8 * mc_addr); + +static void ixgb_mta_set(struct ixgb_hw *hw, u32 hash_value); + +static void ixgb_get_bus_info(struct ixgb_hw *hw); + +static bool ixgb_link_reset(struct ixgb_hw *hw); + +static void ixgb_optics_reset(struct ixgb_hw *hw); + +static void ixgb_optics_reset_bcm(struct ixgb_hw *hw); + +static ixgb_phy_type ixgb_identify_phy(struct ixgb_hw *hw); + +static void ixgb_clear_hw_cntrs(struct ixgb_hw *hw); + +static void ixgb_clear_vfta(struct ixgb_hw *hw); + +static void ixgb_init_rx_addrs(struct ixgb_hw *hw); + +static u16 ixgb_read_phy_reg(struct ixgb_hw *hw, + u32 reg_address, + u32 phy_address, + u32 device_type); + +static bool ixgb_setup_fc(struct ixgb_hw *hw); + +static bool mac_addr_valid(u8 *mac_addr); + +static u32 ixgb_mac_reset(struct ixgb_hw *hw) +{ + u32 ctrl_reg; + + ctrl_reg = IXGB_CTRL0_RST | + IXGB_CTRL0_SDP3_DIR | /* All pins are Output=1 */ + IXGB_CTRL0_SDP2_DIR | + IXGB_CTRL0_SDP1_DIR | + IXGB_CTRL0_SDP0_DIR | + IXGB_CTRL0_SDP3 | /* Initial value 1101 */ + IXGB_CTRL0_SDP2 | + IXGB_CTRL0_SDP0; + +#ifdef HP_ZX1 + /* Workaround for 82597EX reset errata */ + IXGB_WRITE_REG_IO(hw, CTRL0, ctrl_reg); +#else + IXGB_WRITE_REG(hw, CTRL0, ctrl_reg); +#endif + + /* Delay a few ms just to allow the reset to complete */ + msleep(IXGB_DELAY_AFTER_RESET); + ctrl_reg = IXGB_READ_REG(hw, CTRL0); +#ifdef DBG + /* Make sure the self-clearing global reset bit did self clear */ + ASSERT(!(ctrl_reg & IXGB_CTRL0_RST)); +#endif + + if (hw->subsystem_vendor_id == PCI_VENDOR_ID_SUN) { + ctrl_reg = /* Enable interrupt from XFP and SerDes */ + IXGB_CTRL1_GPI0_EN | + IXGB_CTRL1_SDP6_DIR | + IXGB_CTRL1_SDP7_DIR | + IXGB_CTRL1_SDP6 | + IXGB_CTRL1_SDP7; + IXGB_WRITE_REG(hw, CTRL1, ctrl_reg); + ixgb_optics_reset_bcm(hw); + } + + if (hw->phy_type == ixgb_phy_type_txn17401) + ixgb_optics_reset(hw); + + return ctrl_reg; +} + +/****************************************************************************** + * Reset the transmit and receive units; mask and clear all interrupts. + * + * hw - Struct containing variables accessed by shared code + *****************************************************************************/ +bool +ixgb_adapter_stop(struct ixgb_hw *hw) +{ + u32 ctrl_reg; + u32 icr_reg; + + ENTER(); + + /* If we are stopped or resetting exit gracefully and wait to be + * started again before accessing the hardware. + */ + if (hw->adapter_stopped) { + pr_debug("Exiting because the adapter is already stopped!!!\n"); + return false; + } + + /* Set the Adapter Stopped flag so other driver functions stop + * touching the Hardware. + */ + hw->adapter_stopped = true; + + /* Clear interrupt mask to stop board from generating interrupts */ + pr_debug("Masking off all interrupts\n"); + IXGB_WRITE_REG(hw, IMC, 0xFFFFFFFF); + + /* Disable the Transmit and Receive units. Then delay to allow + * any pending transactions to complete before we hit the MAC with + * the global reset. + */ + IXGB_WRITE_REG(hw, RCTL, IXGB_READ_REG(hw, RCTL) & ~IXGB_RCTL_RXEN); + IXGB_WRITE_REG(hw, TCTL, IXGB_READ_REG(hw, TCTL) & ~IXGB_TCTL_TXEN); + IXGB_WRITE_FLUSH(hw); + msleep(IXGB_DELAY_BEFORE_RESET); + + /* Issue a global reset to the MAC. This will reset the chip's + * transmit, receive, DMA, and link units. It will not effect + * the current PCI configuration. The global reset bit is self- + * clearing, and should clear within a microsecond. + */ + pr_debug("Issuing a global reset to MAC\n"); + + ctrl_reg = ixgb_mac_reset(hw); + + /* Clear interrupt mask to stop board from generating interrupts */ + pr_debug("Masking off all interrupts\n"); + IXGB_WRITE_REG(hw, IMC, 0xffffffff); + + /* Clear any pending interrupt events. */ + icr_reg = IXGB_READ_REG(hw, ICR); + + return ctrl_reg & IXGB_CTRL0_RST; +} + + +/****************************************************************************** + * Identifies the vendor of the optics module on the adapter. The SR adapters + * support two different types of XPAK optics, so it is necessary to determine + * which optics are present before applying any optics-specific workarounds. + * + * hw - Struct containing variables accessed by shared code. + * + * Returns: the vendor of the XPAK optics module. + *****************************************************************************/ +static ixgb_xpak_vendor +ixgb_identify_xpak_vendor(struct ixgb_hw *hw) +{ + u32 i; + u16 vendor_name[5]; + ixgb_xpak_vendor xpak_vendor; + + ENTER(); + + /* Read the first few bytes of the vendor string from the XPAK NVR + * registers. These are standard XENPAK/XPAK registers, so all XPAK + * devices should implement them. */ + for (i = 0; i < 5; i++) { + vendor_name[i] = ixgb_read_phy_reg(hw, + MDIO_PMA_PMD_XPAK_VENDOR_NAME + + i, IXGB_PHY_ADDRESS, + MDIO_MMD_PMAPMD); + } + + /* Determine the actual vendor */ + if (vendor_name[0] == 'I' && + vendor_name[1] == 'N' && + vendor_name[2] == 'T' && + vendor_name[3] == 'E' && vendor_name[4] == 'L') { + xpak_vendor = ixgb_xpak_vendor_intel; + } else { + xpak_vendor = ixgb_xpak_vendor_infineon; + } + + return xpak_vendor; +} + +/****************************************************************************** + * Determine the physical layer module on the adapter. + * + * hw - Struct containing variables accessed by shared code. The device_id + * field must be (correctly) populated before calling this routine. + * + * Returns: the phy type of the adapter. + *****************************************************************************/ +static ixgb_phy_type +ixgb_identify_phy(struct ixgb_hw *hw) +{ + ixgb_phy_type phy_type; + ixgb_xpak_vendor xpak_vendor; + + ENTER(); + + /* Infer the transceiver/phy type from the device id */ + switch (hw->device_id) { + case IXGB_DEVICE_ID_82597EX: + pr_debug("Identified TXN17401 optics\n"); + phy_type = ixgb_phy_type_txn17401; + break; + + case IXGB_DEVICE_ID_82597EX_SR: + /* The SR adapters carry two different types of XPAK optics + * modules; read the vendor identifier to determine the exact + * type of optics. */ + xpak_vendor = ixgb_identify_xpak_vendor(hw); + if (xpak_vendor == ixgb_xpak_vendor_intel) { + pr_debug("Identified TXN17201 optics\n"); + phy_type = ixgb_phy_type_txn17201; + } else { + pr_debug("Identified G6005 optics\n"); + phy_type = ixgb_phy_type_g6005; + } + break; + case IXGB_DEVICE_ID_82597EX_LR: + pr_debug("Identified G6104 optics\n"); + phy_type = ixgb_phy_type_g6104; + break; + case IXGB_DEVICE_ID_82597EX_CX4: + pr_debug("Identified CX4\n"); + xpak_vendor = ixgb_identify_xpak_vendor(hw); + if (xpak_vendor == ixgb_xpak_vendor_intel) { + pr_debug("Identified TXN17201 optics\n"); + phy_type = ixgb_phy_type_txn17201; + } else { + pr_debug("Identified G6005 optics\n"); + phy_type = ixgb_phy_type_g6005; + } + break; + default: + pr_debug("Unknown physical layer module\n"); + phy_type = ixgb_phy_type_unknown; + break; + } + + /* update phy type for sun specific board */ + if (hw->subsystem_vendor_id == PCI_VENDOR_ID_SUN) + phy_type = ixgb_phy_type_bcm; + + return phy_type; +} + +/****************************************************************************** + * Performs basic configuration of the adapter. + * + * hw - Struct containing variables accessed by shared code + * + * Resets the controller. + * Reads and validates the EEPROM. + * Initializes the receive address registers. + * Initializes the multicast table. + * Clears all on-chip counters. + * Calls routine to setup flow control settings. + * Leaves the transmit and receive units disabled and uninitialized. + * + * Returns: + * true if successful, + * false if unrecoverable problems were encountered. + *****************************************************************************/ +bool +ixgb_init_hw(struct ixgb_hw *hw) +{ + u32 i; + u32 ctrl_reg; + bool status; + + ENTER(); + + /* Issue a global reset to the MAC. This will reset the chip's + * transmit, receive, DMA, and link units. It will not effect + * the current PCI configuration. The global reset bit is self- + * clearing, and should clear within a microsecond. + */ + pr_debug("Issuing a global reset to MAC\n"); + + ctrl_reg = ixgb_mac_reset(hw); + + pr_debug("Issuing an EE reset to MAC\n"); +#ifdef HP_ZX1 + /* Workaround for 82597EX reset errata */ + IXGB_WRITE_REG_IO(hw, CTRL1, IXGB_CTRL1_EE_RST); +#else + IXGB_WRITE_REG(hw, CTRL1, IXGB_CTRL1_EE_RST); +#endif + + /* Delay a few ms just to allow the reset to complete */ + msleep(IXGB_DELAY_AFTER_EE_RESET); + + if (!ixgb_get_eeprom_data(hw)) + return false; + + /* Use the device id to determine the type of phy/transceiver. */ + hw->device_id = ixgb_get_ee_device_id(hw); + hw->phy_type = ixgb_identify_phy(hw); + + /* Setup the receive addresses. + * Receive Address Registers (RARs 0 - 15). + */ + ixgb_init_rx_addrs(hw); + + /* + * Check that a valid MAC address has been set. + * If it is not valid, we fail hardware init. + */ + if (!mac_addr_valid(hw->curr_mac_addr)) { + pr_debug("MAC address invalid after ixgb_init_rx_addrs\n"); + return(false); + } + + /* tell the routines in this file they can access hardware again */ + hw->adapter_stopped = false; + + /* Fill in the bus_info structure */ + ixgb_get_bus_info(hw); + + /* Zero out the Multicast HASH table */ + pr_debug("Zeroing the MTA\n"); + for (i = 0; i < IXGB_MC_TBL_SIZE; i++) + IXGB_WRITE_REG_ARRAY(hw, MTA, i, 0); + + /* Zero out the VLAN Filter Table Array */ + ixgb_clear_vfta(hw); + + /* Zero all of the hardware counters */ + ixgb_clear_hw_cntrs(hw); + + /* Call a subroutine to setup flow control. */ + status = ixgb_setup_fc(hw); + + /* 82597EX errata: Call check-for-link in case lane deskew is locked */ + ixgb_check_for_link(hw); + + return status; +} + +/****************************************************************************** + * Initializes receive address filters. + * + * hw - Struct containing variables accessed by shared code + * + * Places the MAC address in receive address register 0 and clears the rest + * of the receive address registers. Clears the multicast table. Assumes + * the receiver is in reset when the routine is called. + *****************************************************************************/ +static void +ixgb_init_rx_addrs(struct ixgb_hw *hw) +{ + u32 i; + + ENTER(); + + /* + * If the current mac address is valid, assume it is a software override + * to the permanent address. + * Otherwise, use the permanent address from the eeprom. + */ + if (!mac_addr_valid(hw->curr_mac_addr)) { + + /* Get the MAC address from the eeprom for later reference */ + ixgb_get_ee_mac_addr(hw, hw->curr_mac_addr); + + pr_debug("Keeping Permanent MAC Addr = %pM\n", + hw->curr_mac_addr); + } else { + + /* Setup the receive address. */ + pr_debug("Overriding MAC Address in RAR[0]\n"); + pr_debug("New MAC Addr = %pM\n", hw->curr_mac_addr); + + ixgb_rar_set(hw, hw->curr_mac_addr, 0); + } + + /* Zero out the other 15 receive addresses. */ + pr_debug("Clearing RAR[1-15]\n"); + for (i = 1; i < IXGB_RAR_ENTRIES; i++) { + /* Write high reg first to disable the AV bit first */ + IXGB_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0); + IXGB_WRITE_REG_ARRAY(hw, RA, (i << 1), 0); + } +} + +/****************************************************************************** + * Updates the MAC's list of multicast addresses. + * + * hw - Struct containing variables accessed by shared code + * mc_addr_list - the list of new multicast addresses + * mc_addr_count - number of addresses + * pad - number of bytes between addresses in the list + * + * The given list replaces any existing list. Clears the last 15 receive + * address registers and the multicast table. Uses receive address registers + * for the first 15 multicast addresses, and hashes the rest into the + * multicast table. + *****************************************************************************/ +void +ixgb_mc_addr_list_update(struct ixgb_hw *hw, + u8 *mc_addr_list, + u32 mc_addr_count, + u32 pad) +{ + u32 hash_value; + u32 i; + u32 rar_used_count = 1; /* RAR[0] is used for our MAC address */ + u8 *mca; + + ENTER(); + + /* Set the new number of MC addresses that we are being requested to use. */ + hw->num_mc_addrs = mc_addr_count; + + /* Clear RAR[1-15] */ + pr_debug("Clearing RAR[1-15]\n"); + for (i = rar_used_count; i < IXGB_RAR_ENTRIES; i++) { + IXGB_WRITE_REG_ARRAY(hw, RA, (i << 1), 0); + IXGB_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0); + } + + /* Clear the MTA */ + pr_debug("Clearing MTA\n"); + for (i = 0; i < IXGB_MC_TBL_SIZE; i++) + IXGB_WRITE_REG_ARRAY(hw, MTA, i, 0); + + /* Add the new addresses */ + mca = mc_addr_list; + for (i = 0; i < mc_addr_count; i++) { + pr_debug("Adding the multicast addresses:\n"); + pr_debug("MC Addr #%d = %pM\n", i, mca); + + /* Place this multicast address in the RAR if there is room, * + * else put it in the MTA + */ + if (rar_used_count < IXGB_RAR_ENTRIES) { + ixgb_rar_set(hw, mca, rar_used_count); + pr_debug("Added a multicast address to RAR[%d]\n", i); + rar_used_count++; + } else { + hash_value = ixgb_hash_mc_addr(hw, mca); + + pr_debug("Hash value = 0x%03X\n", hash_value); + + ixgb_mta_set(hw, hash_value); + } + + mca += ETH_ALEN + pad; + } + + pr_debug("MC Update Complete\n"); +} + +/****************************************************************************** + * Hashes an address to determine its location in the multicast table + * + * hw - Struct containing variables accessed by shared code + * mc_addr - the multicast address to hash + * + * Returns: + * The hash value + *****************************************************************************/ +static u32 +ixgb_hash_mc_addr(struct ixgb_hw *hw, + u8 *mc_addr) +{ + u32 hash_value = 0; + + ENTER(); + + /* The portion of the address that is used for the hash table is + * determined by the mc_filter_type setting. + */ + switch (hw->mc_filter_type) { + /* [0] [1] [2] [3] [4] [5] + * 01 AA 00 12 34 56 + * LSB MSB - According to H/W docs */ + case 0: + /* [47:36] i.e. 0x563 for above example address */ + hash_value = + ((mc_addr[4] >> 4) | (((u16) mc_addr[5]) << 4)); + break; + case 1: /* [46:35] i.e. 0xAC6 for above example address */ + hash_value = + ((mc_addr[4] >> 3) | (((u16) mc_addr[5]) << 5)); + break; + case 2: /* [45:34] i.e. 0x5D8 for above example address */ + hash_value = + ((mc_addr[4] >> 2) | (((u16) mc_addr[5]) << 6)); + break; + case 3: /* [43:32] i.e. 0x634 for above example address */ + hash_value = ((mc_addr[4]) | (((u16) mc_addr[5]) << 8)); + break; + default: + /* Invalid mc_filter_type, what should we do? */ + pr_debug("MC filter type param set incorrectly\n"); + ASSERT(0); + break; + } + + hash_value &= 0xFFF; + return hash_value; +} + +/****************************************************************************** + * Sets the bit in the multicast table corresponding to the hash value. + * + * hw - Struct containing variables accessed by shared code + * hash_value - Multicast address hash value + *****************************************************************************/ +static void +ixgb_mta_set(struct ixgb_hw *hw, + u32 hash_value) +{ + u32 hash_bit, hash_reg; + u32 mta_reg; + + /* The MTA is a register array of 128 32-bit registers. + * It is treated like an array of 4096 bits. We want to set + * bit BitArray[hash_value]. So we figure out what register + * the bit is in, read it, OR in the new bit, then write + * back the new value. The register is determined by the + * upper 7 bits of the hash value and the bit within that + * register are determined by the lower 5 bits of the value. + */ + hash_reg = (hash_value >> 5) & 0x7F; + hash_bit = hash_value & 0x1F; + + mta_reg = IXGB_READ_REG_ARRAY(hw, MTA, hash_reg); + + mta_reg |= (1 << hash_bit); + + IXGB_WRITE_REG_ARRAY(hw, MTA, hash_reg, mta_reg); +} + +/****************************************************************************** + * Puts an ethernet address into a receive address register. + * + * hw - Struct containing variables accessed by shared code + * addr - Address to put into receive address register + * index - Receive address register to write + *****************************************************************************/ +void +ixgb_rar_set(struct ixgb_hw *hw, + u8 *addr, + u32 index) +{ + u32 rar_low, rar_high; + + ENTER(); + + /* HW expects these in little endian so we reverse the byte order + * from network order (big endian) to little endian + */ + rar_low = ((u32) addr[0] | + ((u32)addr[1] << 8) | + ((u32)addr[2] << 16) | + ((u32)addr[3] << 24)); + + rar_high = ((u32) addr[4] | + ((u32)addr[5] << 8) | + IXGB_RAH_AV); + + IXGB_WRITE_REG_ARRAY(hw, RA, (index << 1), rar_low); + IXGB_WRITE_REG_ARRAY(hw, RA, ((index << 1) + 1), rar_high); +} + +/****************************************************************************** + * Writes a value to the specified offset in the VLAN filter table. + * + * hw - Struct containing variables accessed by shared code + * offset - Offset in VLAN filer table to write + * value - Value to write into VLAN filter table + *****************************************************************************/ +void +ixgb_write_vfta(struct ixgb_hw *hw, + u32 offset, + u32 value) +{ + IXGB_WRITE_REG_ARRAY(hw, VFTA, offset, value); +} + +/****************************************************************************** + * Clears the VLAN filer table + * + * hw - Struct containing variables accessed by shared code + *****************************************************************************/ +static void +ixgb_clear_vfta(struct ixgb_hw *hw) +{ + u32 offset; + + for (offset = 0; offset < IXGB_VLAN_FILTER_TBL_SIZE; offset++) + IXGB_WRITE_REG_ARRAY(hw, VFTA, offset, 0); +} + +/****************************************************************************** + * Configures the flow control settings based on SW configuration. + * + * hw - Struct containing variables accessed by shared code + *****************************************************************************/ + +static bool +ixgb_setup_fc(struct ixgb_hw *hw) +{ + u32 ctrl_reg; + u32 pap_reg = 0; /* by default, assume no pause time */ + bool status = true; + + ENTER(); + + /* Get the current control reg 0 settings */ + ctrl_reg = IXGB_READ_REG(hw, CTRL0); + + /* Clear the Receive Pause Enable and Transmit Pause Enable bits */ + ctrl_reg &= ~(IXGB_CTRL0_RPE | IXGB_CTRL0_TPE); + + /* The possible values of the "flow_control" parameter are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames + * but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames + * but we do not support receiving pause frames). + * 3: Both Rx and TX flow control (symmetric) are enabled. + * other: Invalid. + */ + switch (hw->fc.type) { + case ixgb_fc_none: /* 0 */ + /* Set CMDC bit to disable Rx Flow control */ + ctrl_reg |= (IXGB_CTRL0_CMDC); + break; + case ixgb_fc_rx_pause: /* 1 */ + /* RX Flow control is enabled, and TX Flow control is + * disabled. + */ + ctrl_reg |= (IXGB_CTRL0_RPE); + break; + case ixgb_fc_tx_pause: /* 2 */ + /* TX Flow control is enabled, and RX Flow control is + * disabled, by a software over-ride. + */ + ctrl_reg |= (IXGB_CTRL0_TPE); + pap_reg = hw->fc.pause_time; + break; + case ixgb_fc_full: /* 3 */ + /* Flow control (both RX and TX) is enabled by a software + * over-ride. + */ + ctrl_reg |= (IXGB_CTRL0_RPE | IXGB_CTRL0_TPE); + pap_reg = hw->fc.pause_time; + break; + default: + /* We should never get here. The value should be 0-3. */ + pr_debug("Flow control param set incorrectly\n"); + ASSERT(0); + break; + } + + /* Write the new settings */ + IXGB_WRITE_REG(hw, CTRL0, ctrl_reg); + + if (pap_reg != 0) + IXGB_WRITE_REG(hw, PAP, pap_reg); + + /* Set the flow control receive threshold registers. Normally, + * these registers will be set to a default threshold that may be + * adjusted later by the driver's runtime code. However, if the + * ability to transmit pause frames in not enabled, then these + * registers will be set to 0. + */ + if (!(hw->fc.type & ixgb_fc_tx_pause)) { + IXGB_WRITE_REG(hw, FCRTL, 0); + IXGB_WRITE_REG(hw, FCRTH, 0); + } else { + /* We need to set up the Receive Threshold high and low water + * marks as well as (optionally) enabling the transmission of XON + * frames. */ + if (hw->fc.send_xon) { + IXGB_WRITE_REG(hw, FCRTL, + (hw->fc.low_water | IXGB_FCRTL_XONE)); + } else { + IXGB_WRITE_REG(hw, FCRTL, hw->fc.low_water); + } + IXGB_WRITE_REG(hw, FCRTH, hw->fc.high_water); + } + return status; +} + +/****************************************************************************** + * Reads a word from a device over the Management Data Interface (MDI) bus. + * This interface is used to manage Physical layer devices. + * + * hw - Struct containing variables accessed by hw code + * reg_address - Offset of device register being read. + * phy_address - Address of device on MDI. + * + * Returns: Data word (16 bits) from MDI device. + * + * The 82597EX has support for several MDI access methods. This routine + * uses the new protocol MDI Single Command and Address Operation. + * This requires that first an address cycle command is sent, followed by a + * read command. + *****************************************************************************/ +static u16 +ixgb_read_phy_reg(struct ixgb_hw *hw, + u32 reg_address, + u32 phy_address, + u32 device_type) +{ + u32 i; + u32 data; + u32 command = 0; + + ASSERT(reg_address <= IXGB_MAX_PHY_REG_ADDRESS); + ASSERT(phy_address <= IXGB_MAX_PHY_ADDRESS); + ASSERT(device_type <= IXGB_MAX_PHY_DEV_TYPE); + + /* Setup and write the address cycle command */ + command = ((reg_address << IXGB_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGB_MSCA_DEV_TYPE_SHIFT) | + (phy_address << IXGB_MSCA_PHY_ADDR_SHIFT) | + (IXGB_MSCA_ADDR_CYCLE | IXGB_MSCA_MDI_COMMAND)); + + IXGB_WRITE_REG(hw, MSCA, command); + + /************************************************************** + ** Check every 10 usec to see if the address cycle completed + ** The COMMAND bit will clear when the operation is complete. + ** This may take as long as 64 usecs (we'll wait 100 usecs max) + ** from the CPU Write to the Ready bit assertion. + **************************************************************/ + + for (i = 0; i < 10; i++) + { + udelay(10); + + command = IXGB_READ_REG(hw, MSCA); + + if ((command & IXGB_MSCA_MDI_COMMAND) == 0) + break; + } + + ASSERT((command & IXGB_MSCA_MDI_COMMAND) == 0); + + /* Address cycle complete, setup and write the read command */ + command = ((reg_address << IXGB_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGB_MSCA_DEV_TYPE_SHIFT) | + (phy_address << IXGB_MSCA_PHY_ADDR_SHIFT) | + (IXGB_MSCA_READ | IXGB_MSCA_MDI_COMMAND)); + + IXGB_WRITE_REG(hw, MSCA, command); + + /************************************************************** + ** Check every 10 usec to see if the read command completed + ** The COMMAND bit will clear when the operation is complete. + ** The read may take as long as 64 usecs (we'll wait 100 usecs max) + ** from the CPU Write to the Ready bit assertion. + **************************************************************/ + + for (i = 0; i < 10; i++) + { + udelay(10); + + command = IXGB_READ_REG(hw, MSCA); + + if ((command & IXGB_MSCA_MDI_COMMAND) == 0) + break; + } + + ASSERT((command & IXGB_MSCA_MDI_COMMAND) == 0); + + /* Operation is complete, get the data from the MDIO Read/Write Data + * register and return. + */ + data = IXGB_READ_REG(hw, MSRWD); + data >>= IXGB_MSRWD_READ_DATA_SHIFT; + return((u16) data); +} + +/****************************************************************************** + * Writes a word to a device over the Management Data Interface (MDI) bus. + * This interface is used to manage Physical layer devices. + * + * hw - Struct containing variables accessed by hw code + * reg_address - Offset of device register being read. + * phy_address - Address of device on MDI. + * device_type - Also known as the Device ID or DID. + * data - 16-bit value to be written + * + * Returns: void. + * + * The 82597EX has support for several MDI access methods. This routine + * uses the new protocol MDI Single Command and Address Operation. + * This requires that first an address cycle command is sent, followed by a + * write command. + *****************************************************************************/ +static void +ixgb_write_phy_reg(struct ixgb_hw *hw, + u32 reg_address, + u32 phy_address, + u32 device_type, + u16 data) +{ + u32 i; + u32 command = 0; + + ASSERT(reg_address <= IXGB_MAX_PHY_REG_ADDRESS); + ASSERT(phy_address <= IXGB_MAX_PHY_ADDRESS); + ASSERT(device_type <= IXGB_MAX_PHY_DEV_TYPE); + + /* Put the data in the MDIO Read/Write Data register */ + IXGB_WRITE_REG(hw, MSRWD, (u32)data); + + /* Setup and write the address cycle command */ + command = ((reg_address << IXGB_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGB_MSCA_DEV_TYPE_SHIFT) | + (phy_address << IXGB_MSCA_PHY_ADDR_SHIFT) | + (IXGB_MSCA_ADDR_CYCLE | IXGB_MSCA_MDI_COMMAND)); + + IXGB_WRITE_REG(hw, MSCA, command); + + /************************************************************** + ** Check every 10 usec to see if the address cycle completed + ** The COMMAND bit will clear when the operation is complete. + ** This may take as long as 64 usecs (we'll wait 100 usecs max) + ** from the CPU Write to the Ready bit assertion. + **************************************************************/ + + for (i = 0; i < 10; i++) + { + udelay(10); + + command = IXGB_READ_REG(hw, MSCA); + + if ((command & IXGB_MSCA_MDI_COMMAND) == 0) + break; + } + + ASSERT((command & IXGB_MSCA_MDI_COMMAND) == 0); + + /* Address cycle complete, setup and write the write command */ + command = ((reg_address << IXGB_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGB_MSCA_DEV_TYPE_SHIFT) | + (phy_address << IXGB_MSCA_PHY_ADDR_SHIFT) | + (IXGB_MSCA_WRITE | IXGB_MSCA_MDI_COMMAND)); + + IXGB_WRITE_REG(hw, MSCA, command); + + /************************************************************** + ** Check every 10 usec to see if the read command completed + ** The COMMAND bit will clear when the operation is complete. + ** The write may take as long as 64 usecs (we'll wait 100 usecs max) + ** from the CPU Write to the Ready bit assertion. + **************************************************************/ + + for (i = 0; i < 10; i++) + { + udelay(10); + + command = IXGB_READ_REG(hw, MSCA); + + if ((command & IXGB_MSCA_MDI_COMMAND) == 0) + break; + } + + ASSERT((command & IXGB_MSCA_MDI_COMMAND) == 0); + + /* Operation is complete, return. */ +} + +/****************************************************************************** + * Checks to see if the link status of the hardware has changed. + * + * hw - Struct containing variables accessed by hw code + * + * Called by any function that needs to check the link status of the adapter. + *****************************************************************************/ +void +ixgb_check_for_link(struct ixgb_hw *hw) +{ + u32 status_reg; + u32 xpcss_reg; + + ENTER(); + + xpcss_reg = IXGB_READ_REG(hw, XPCSS); + status_reg = IXGB_READ_REG(hw, STATUS); + + if ((xpcss_reg & IXGB_XPCSS_ALIGN_STATUS) && + (status_reg & IXGB_STATUS_LU)) { + hw->link_up = true; + } else if (!(xpcss_reg & IXGB_XPCSS_ALIGN_STATUS) && + (status_reg & IXGB_STATUS_LU)) { + pr_debug("XPCSS Not Aligned while Status:LU is set\n"); + hw->link_up = ixgb_link_reset(hw); + } else { + /* + * 82597EX errata. Since the lane deskew problem may prevent + * link, reset the link before reporting link down. + */ + hw->link_up = ixgb_link_reset(hw); + } + /* Anything else for 10 Gig?? */ +} + +/****************************************************************************** + * Check for a bad link condition that may have occurred. + * The indication is that the RFC / LFC registers may be incrementing + * continually. A full adapter reset is required to recover. + * + * hw - Struct containing variables accessed by hw code + * + * Called by any function that needs to check the link status of the adapter. + *****************************************************************************/ +bool ixgb_check_for_bad_link(struct ixgb_hw *hw) +{ + u32 newLFC, newRFC; + bool bad_link_returncode = false; + + if (hw->phy_type == ixgb_phy_type_txn17401) { + newLFC = IXGB_READ_REG(hw, LFC); + newRFC = IXGB_READ_REG(hw, RFC); + if ((hw->lastLFC + 250 < newLFC) + || (hw->lastRFC + 250 < newRFC)) { + pr_debug("BAD LINK! too many LFC/RFC since last check\n"); + bad_link_returncode = true; + } + hw->lastLFC = newLFC; + hw->lastRFC = newRFC; + } + + return bad_link_returncode; +} + +/****************************************************************************** + * Clears all hardware statistics counters. + * + * hw - Struct containing variables accessed by shared code + *****************************************************************************/ +static void +ixgb_clear_hw_cntrs(struct ixgb_hw *hw) +{ + volatile u32 temp_reg; + + ENTER(); + + /* if we are stopped or resetting exit gracefully */ + if (hw->adapter_stopped) { + pr_debug("Exiting because the adapter is stopped!!!\n"); + return; + } + + temp_reg = IXGB_READ_REG(hw, TPRL); + temp_reg = IXGB_READ_REG(hw, TPRH); + temp_reg = IXGB_READ_REG(hw, GPRCL); + temp_reg = IXGB_READ_REG(hw, GPRCH); + temp_reg = IXGB_READ_REG(hw, BPRCL); + temp_reg = IXGB_READ_REG(hw, BPRCH); + temp_reg = IXGB_READ_REG(hw, MPRCL); + temp_reg = IXGB_READ_REG(hw, MPRCH); + temp_reg = IXGB_READ_REG(hw, UPRCL); + temp_reg = IXGB_READ_REG(hw, UPRCH); + temp_reg = IXGB_READ_REG(hw, VPRCL); + temp_reg = IXGB_READ_REG(hw, VPRCH); + temp_reg = IXGB_READ_REG(hw, JPRCL); + temp_reg = IXGB_READ_REG(hw, JPRCH); + temp_reg = IXGB_READ_REG(hw, GORCL); + temp_reg = IXGB_READ_REG(hw, GORCH); + temp_reg = IXGB_READ_REG(hw, TORL); + temp_reg = IXGB_READ_REG(hw, TORH); + temp_reg = IXGB_READ_REG(hw, RNBC); + temp_reg = IXGB_READ_REG(hw, RUC); + temp_reg = IXGB_READ_REG(hw, ROC); + temp_reg = IXGB_READ_REG(hw, RLEC); + temp_reg = IXGB_READ_REG(hw, CRCERRS); + temp_reg = IXGB_READ_REG(hw, ICBC); + temp_reg = IXGB_READ_REG(hw, ECBC); + temp_reg = IXGB_READ_REG(hw, MPC); + temp_reg = IXGB_READ_REG(hw, TPTL); + temp_reg = IXGB_READ_REG(hw, TPTH); + temp_reg = IXGB_READ_REG(hw, GPTCL); + temp_reg = IXGB_READ_REG(hw, GPTCH); + temp_reg = IXGB_READ_REG(hw, BPTCL); + temp_reg = IXGB_READ_REG(hw, BPTCH); + temp_reg = IXGB_READ_REG(hw, MPTCL); + temp_reg = IXGB_READ_REG(hw, MPTCH); + temp_reg = IXGB_READ_REG(hw, UPTCL); + temp_reg = IXGB_READ_REG(hw, UPTCH); + temp_reg = IXGB_READ_REG(hw, VPTCL); + temp_reg = IXGB_READ_REG(hw, VPTCH); + temp_reg = IXGB_READ_REG(hw, JPTCL); + temp_reg = IXGB_READ_REG(hw, JPTCH); + temp_reg = IXGB_READ_REG(hw, GOTCL); + temp_reg = IXGB_READ_REG(hw, GOTCH); + temp_reg = IXGB_READ_REG(hw, TOTL); + temp_reg = IXGB_READ_REG(hw, TOTH); + temp_reg = IXGB_READ_REG(hw, DC); + temp_reg = IXGB_READ_REG(hw, PLT64C); + temp_reg = IXGB_READ_REG(hw, TSCTC); + temp_reg = IXGB_READ_REG(hw, TSCTFC); + temp_reg = IXGB_READ_REG(hw, IBIC); + temp_reg = IXGB_READ_REG(hw, RFC); + temp_reg = IXGB_READ_REG(hw, LFC); + temp_reg = IXGB_READ_REG(hw, PFRC); + temp_reg = IXGB_READ_REG(hw, PFTC); + temp_reg = IXGB_READ_REG(hw, MCFRC); + temp_reg = IXGB_READ_REG(hw, MCFTC); + temp_reg = IXGB_READ_REG(hw, XONRXC); + temp_reg = IXGB_READ_REG(hw, XONTXC); + temp_reg = IXGB_READ_REG(hw, XOFFRXC); + temp_reg = IXGB_READ_REG(hw, XOFFTXC); + temp_reg = IXGB_READ_REG(hw, RJC); +} + +/****************************************************************************** + * Turns on the software controllable LED + * + * hw - Struct containing variables accessed by shared code + *****************************************************************************/ +void +ixgb_led_on(struct ixgb_hw *hw) +{ + u32 ctrl0_reg = IXGB_READ_REG(hw, CTRL0); + + /* To turn on the LED, clear software-definable pin 0 (SDP0). */ + ctrl0_reg &= ~IXGB_CTRL0_SDP0; + IXGB_WRITE_REG(hw, CTRL0, ctrl0_reg); +} + +/****************************************************************************** + * Turns off the software controllable LED + * + * hw - Struct containing variables accessed by shared code + *****************************************************************************/ +void +ixgb_led_off(struct ixgb_hw *hw) +{ + u32 ctrl0_reg = IXGB_READ_REG(hw, CTRL0); + + /* To turn off the LED, set software-definable pin 0 (SDP0). */ + ctrl0_reg |= IXGB_CTRL0_SDP0; + IXGB_WRITE_REG(hw, CTRL0, ctrl0_reg); +} + +/****************************************************************************** + * Gets the current PCI bus type, speed, and width of the hardware + * + * hw - Struct containing variables accessed by shared code + *****************************************************************************/ +static void +ixgb_get_bus_info(struct ixgb_hw *hw) +{ + u32 status_reg; + + status_reg = IXGB_READ_REG(hw, STATUS); + + hw->bus.type = (status_reg & IXGB_STATUS_PCIX_MODE) ? + ixgb_bus_type_pcix : ixgb_bus_type_pci; + + if (hw->bus.type == ixgb_bus_type_pci) { + hw->bus.speed = (status_reg & IXGB_STATUS_PCI_SPD) ? + ixgb_bus_speed_66 : ixgb_bus_speed_33; + } else { + switch (status_reg & IXGB_STATUS_PCIX_SPD_MASK) { + case IXGB_STATUS_PCIX_SPD_66: + hw->bus.speed = ixgb_bus_speed_66; + break; + case IXGB_STATUS_PCIX_SPD_100: + hw->bus.speed = ixgb_bus_speed_100; + break; + case IXGB_STATUS_PCIX_SPD_133: + hw->bus.speed = ixgb_bus_speed_133; + break; + default: + hw->bus.speed = ixgb_bus_speed_reserved; + break; + } + } + + hw->bus.width = (status_reg & IXGB_STATUS_BUS64) ? + ixgb_bus_width_64 : ixgb_bus_width_32; +} + +/****************************************************************************** + * Tests a MAC address to ensure it is a valid Individual Address + * + * mac_addr - pointer to MAC address. + * + *****************************************************************************/ +static bool +mac_addr_valid(u8 *mac_addr) +{ + bool is_valid = true; + ENTER(); + + /* Make sure it is not a multicast address */ + if (is_multicast_ether_addr(mac_addr)) { + pr_debug("MAC address is multicast\n"); + is_valid = false; + } + /* Not a broadcast address */ + else if (is_broadcast_ether_addr(mac_addr)) { + pr_debug("MAC address is broadcast\n"); + is_valid = false; + } + /* Reject the zero address */ + else if (is_zero_ether_addr(mac_addr)) { + pr_debug("MAC address is all zeros\n"); + is_valid = false; + } + return is_valid; +} + +/****************************************************************************** + * Resets the 10GbE link. Waits the settle time and returns the state of + * the link. + * + * hw - Struct containing variables accessed by shared code + *****************************************************************************/ +static bool +ixgb_link_reset(struct ixgb_hw *hw) +{ + bool link_status = false; + u8 wait_retries = MAX_RESET_ITERATIONS; + u8 lrst_retries = MAX_RESET_ITERATIONS; + + do { + /* Reset the link */ + IXGB_WRITE_REG(hw, CTRL0, + IXGB_READ_REG(hw, CTRL0) | IXGB_CTRL0_LRST); + + /* Wait for link-up and lane re-alignment */ + do { + udelay(IXGB_DELAY_USECS_AFTER_LINK_RESET); + link_status = + ((IXGB_READ_REG(hw, STATUS) & IXGB_STATUS_LU) + && (IXGB_READ_REG(hw, XPCSS) & + IXGB_XPCSS_ALIGN_STATUS)) ? true : false; + } while (!link_status && --wait_retries); + + } while (!link_status && --lrst_retries); + + return link_status; +} + +/****************************************************************************** + * Resets the 10GbE optics module. + * + * hw - Struct containing variables accessed by shared code + *****************************************************************************/ +static void +ixgb_optics_reset(struct ixgb_hw *hw) +{ + if (hw->phy_type == ixgb_phy_type_txn17401) { + u16 mdio_reg; + + ixgb_write_phy_reg(hw, + MDIO_CTRL1, + IXGB_PHY_ADDRESS, + MDIO_MMD_PMAPMD, + MDIO_CTRL1_RESET); + + mdio_reg = ixgb_read_phy_reg(hw, + MDIO_CTRL1, + IXGB_PHY_ADDRESS, + MDIO_MMD_PMAPMD); + } +} + +/****************************************************************************** + * Resets the 10GbE optics module for Sun variant NIC. + * + * hw - Struct containing variables accessed by shared code + *****************************************************************************/ + +#define IXGB_BCM8704_USER_PMD_TX_CTRL_REG 0xC803 +#define IXGB_BCM8704_USER_PMD_TX_CTRL_REG_VAL 0x0164 +#define IXGB_BCM8704_USER_CTRL_REG 0xC800 +#define IXGB_BCM8704_USER_CTRL_REG_VAL 0x7FBF +#define IXGB_BCM8704_USER_DEV3_ADDR 0x0003 +#define IXGB_SUN_PHY_ADDRESS 0x0000 +#define IXGB_SUN_PHY_RESET_DELAY 305 + +static void +ixgb_optics_reset_bcm(struct ixgb_hw *hw) +{ + u32 ctrl = IXGB_READ_REG(hw, CTRL0); + ctrl &= ~IXGB_CTRL0_SDP2; + ctrl |= IXGB_CTRL0_SDP3; + IXGB_WRITE_REG(hw, CTRL0, ctrl); + IXGB_WRITE_FLUSH(hw); + + /* SerDes needs extra delay */ + msleep(IXGB_SUN_PHY_RESET_DELAY); + + /* Broadcom 7408L configuration */ + /* Reference clock config */ + ixgb_write_phy_reg(hw, + IXGB_BCM8704_USER_PMD_TX_CTRL_REG, + IXGB_SUN_PHY_ADDRESS, + IXGB_BCM8704_USER_DEV3_ADDR, + IXGB_BCM8704_USER_PMD_TX_CTRL_REG_VAL); + /* we must read the registers twice */ + ixgb_read_phy_reg(hw, + IXGB_BCM8704_USER_PMD_TX_CTRL_REG, + IXGB_SUN_PHY_ADDRESS, + IXGB_BCM8704_USER_DEV3_ADDR); + ixgb_read_phy_reg(hw, + IXGB_BCM8704_USER_PMD_TX_CTRL_REG, + IXGB_SUN_PHY_ADDRESS, + IXGB_BCM8704_USER_DEV3_ADDR); + + ixgb_write_phy_reg(hw, + IXGB_BCM8704_USER_CTRL_REG, + IXGB_SUN_PHY_ADDRESS, + IXGB_BCM8704_USER_DEV3_ADDR, + IXGB_BCM8704_USER_CTRL_REG_VAL); + ixgb_read_phy_reg(hw, + IXGB_BCM8704_USER_CTRL_REG, + IXGB_SUN_PHY_ADDRESS, + IXGB_BCM8704_USER_DEV3_ADDR); + ixgb_read_phy_reg(hw, + IXGB_BCM8704_USER_CTRL_REG, + IXGB_SUN_PHY_ADDRESS, + IXGB_BCM8704_USER_DEV3_ADDR); + + /* SerDes needs extra delay */ + msleep(IXGB_SUN_PHY_RESET_DELAY); +} diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_hw.h b/drivers/net/ethernet/intel/ixgb/ixgb_hw.h new file mode 100644 index 00000000000..0bd5d72e1af --- /dev/null +++ b/drivers/net/ethernet/intel/ixgb/ixgb_hw.h @@ -0,0 +1,792 @@ +/******************************************************************************* + + Intel PRO/10GbE Linux driver + Copyright(c) 1999 - 2008 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _IXGB_HW_H_ +#define _IXGB_HW_H_ + +#include <linux/mdio.h> + +#include "ixgb_osdep.h" + +/* Enums */ +typedef enum { + ixgb_mac_unknown = 0, + ixgb_82597, + ixgb_num_macs +} ixgb_mac_type; + +/* Types of physical layer modules */ +typedef enum { + ixgb_phy_type_unknown = 0, + ixgb_phy_type_g6005, /* 850nm, MM fiber, XPAK transceiver */ + ixgb_phy_type_g6104, /* 1310nm, SM fiber, XPAK transceiver */ + ixgb_phy_type_txn17201, /* 850nm, MM fiber, XPAK transceiver */ + ixgb_phy_type_txn17401, /* 1310nm, SM fiber, XENPAK transceiver */ + ixgb_phy_type_bcm /* SUN specific board */ +} ixgb_phy_type; + +/* XPAK transceiver vendors, for the SR adapters */ +typedef enum { + ixgb_xpak_vendor_intel, + ixgb_xpak_vendor_infineon +} ixgb_xpak_vendor; + +/* Media Types */ +typedef enum { + ixgb_media_type_unknown = 0, + ixgb_media_type_fiber = 1, + ixgb_media_type_copper = 2, + ixgb_num_media_types +} ixgb_media_type; + +/* Flow Control Settings */ +typedef enum { + ixgb_fc_none = 0, + ixgb_fc_rx_pause = 1, + ixgb_fc_tx_pause = 2, + ixgb_fc_full = 3, + ixgb_fc_default = 0xFF +} ixgb_fc_type; + +/* PCI bus types */ +typedef enum { + ixgb_bus_type_unknown = 0, + ixgb_bus_type_pci, + ixgb_bus_type_pcix +} ixgb_bus_type; + +/* PCI bus speeds */ +typedef enum { + ixgb_bus_speed_unknown = 0, + ixgb_bus_speed_33, + ixgb_bus_speed_66, + ixgb_bus_speed_100, + ixgb_bus_speed_133, + ixgb_bus_speed_reserved +} ixgb_bus_speed; + +/* PCI bus widths */ +typedef enum { + ixgb_bus_width_unknown = 0, + ixgb_bus_width_32, + ixgb_bus_width_64 +} ixgb_bus_width; + +#define IXGB_EEPROM_SIZE 64 /* Size in words */ + +#define SPEED_10000 10000 +#define FULL_DUPLEX 2 + +#define MIN_NUMBER_OF_DESCRIPTORS 8 +#define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8 /* 13 bits in RDLEN/TDLEN, 128B aligned */ + +#define IXGB_DELAY_BEFORE_RESET 10 /* allow 10ms after idling rx/tx units */ +#define IXGB_DELAY_AFTER_RESET 1 /* allow 1ms after the reset */ +#define IXGB_DELAY_AFTER_EE_RESET 10 /* allow 10ms after the EEPROM reset */ + +#define IXGB_DELAY_USECS_AFTER_LINK_RESET 13 /* allow 13 microseconds after the reset */ + /* NOTE: this is MICROSECONDS */ +#define MAX_RESET_ITERATIONS 8 /* number of iterations to get things right */ + +/* General Registers */ +#define IXGB_CTRL0 0x00000 /* Device Control Register 0 - RW */ +#define IXGB_CTRL1 0x00008 /* Device Control Register 1 - RW */ +#define IXGB_STATUS 0x00010 /* Device Status Register - RO */ +#define IXGB_EECD 0x00018 /* EEPROM/Flash Control/Data Register - RW */ +#define IXGB_MFS 0x00020 /* Maximum Frame Size - RW */ + +/* Interrupt */ +#define IXGB_ICR 0x00080 /* Interrupt Cause Read - R/clr */ +#define IXGB_ICS 0x00088 /* Interrupt Cause Set - RW */ +#define IXGB_IMS 0x00090 /* Interrupt Mask Set/Read - RW */ +#define IXGB_IMC 0x00098 /* Interrupt Mask Clear - WO */ + +/* Receive */ +#define IXGB_RCTL 0x00100 /* RX Control - RW */ +#define IXGB_FCRTL 0x00108 /* Flow Control Receive Threshold Low - RW */ +#define IXGB_FCRTH 0x00110 /* Flow Control Receive Threshold High - RW */ +#define IXGB_RDBAL 0x00118 /* RX Descriptor Base Low - RW */ +#define IXGB_RDBAH 0x0011C /* RX Descriptor Base High - RW */ +#define IXGB_RDLEN 0x00120 /* RX Descriptor Length - RW */ +#define IXGB_RDH 0x00128 /* RX Descriptor Head - RW */ +#define IXGB_RDT 0x00130 /* RX Descriptor Tail - RW */ +#define IXGB_RDTR 0x00138 /* RX Delay Timer Ring - RW */ +#define IXGB_RXDCTL 0x00140 /* Receive Descriptor Control - RW */ +#define IXGB_RAIDC 0x00148 /* Receive Adaptive Interrupt Delay Control - RW */ +#define IXGB_RXCSUM 0x00158 /* Receive Checksum Control - RW */ +#define IXGB_RA 0x00180 /* Receive Address Array Base - RW */ +#define IXGB_RAL 0x00180 /* Receive Address Low [0:15] - RW */ +#define IXGB_RAH 0x00184 /* Receive Address High [0:15] - RW */ +#define IXGB_MTA 0x00200 /* Multicast Table Array [0:127] - RW */ +#define IXGB_VFTA 0x00400 /* VLAN Filter Table Array [0:127] - RW */ +#define IXGB_REQ_RX_DESCRIPTOR_MULTIPLE 8 + +/* Transmit */ +#define IXGB_TCTL 0x00600 /* TX Control - RW */ +#define IXGB_TDBAL 0x00608 /* TX Descriptor Base Low - RW */ +#define IXGB_TDBAH 0x0060C /* TX Descriptor Base High - RW */ +#define IXGB_TDLEN 0x00610 /* TX Descriptor Length - RW */ +#define IXGB_TDH 0x00618 /* TX Descriptor Head - RW */ +#define IXGB_TDT 0x00620 /* TX Descriptor Tail - RW */ +#define IXGB_TIDV 0x00628 /* TX Interrupt Delay Value - RW */ +#define IXGB_TXDCTL 0x00630 /* Transmit Descriptor Control - RW */ +#define IXGB_TSPMT 0x00638 /* TCP Segmentation PAD & Min Threshold - RW */ +#define IXGB_PAP 0x00640 /* Pause and Pace - RW */ +#define IXGB_REQ_TX_DESCRIPTOR_MULTIPLE 8 + +/* Physical */ +#define IXGB_PCSC1 0x00700 /* PCS Control 1 - RW */ +#define IXGB_PCSC2 0x00708 /* PCS Control 2 - RW */ +#define IXGB_PCSS1 0x00710 /* PCS Status 1 - RO */ +#define IXGB_PCSS2 0x00718 /* PCS Status 2 - RO */ +#define IXGB_XPCSS 0x00720 /* 10GBASE-X PCS Status (or XGXS Lane Status) - RO */ +#define IXGB_UCCR 0x00728 /* Unilink Circuit Control Register */ +#define IXGB_XPCSTC 0x00730 /* 10GBASE-X PCS Test Control */ +#define IXGB_MACA 0x00738 /* MDI Autoscan Command and Address - RW */ +#define IXGB_APAE 0x00740 /* Autoscan PHY Address Enable - RW */ +#define IXGB_ARD 0x00748 /* Autoscan Read Data - RO */ +#define IXGB_AIS 0x00750 /* Autoscan Interrupt Status - RO */ +#define IXGB_MSCA 0x00758 /* MDI Single Command and Address - RW */ +#define IXGB_MSRWD 0x00760 /* MDI Single Read and Write Data - RW, RO */ + +/* Wake-up */ +#define IXGB_WUFC 0x00808 /* Wake Up Filter Control - RW */ +#define IXGB_WUS 0x00810 /* Wake Up Status - RO */ +#define IXGB_FFLT 0x01000 /* Flexible Filter Length Table - RW */ +#define IXGB_FFMT 0x01020 /* Flexible Filter Mask Table - RW */ +#define IXGB_FTVT 0x01420 /* Flexible Filter Value Table - RW */ + +/* Statistics */ +#define IXGB_TPRL 0x02000 /* Total Packets Received (Low) */ +#define IXGB_TPRH 0x02004 /* Total Packets Received (High) */ +#define IXGB_GPRCL 0x02008 /* Good Packets Received Count (Low) */ +#define IXGB_GPRCH 0x0200C /* Good Packets Received Count (High) */ +#define IXGB_BPRCL 0x02010 /* Broadcast Packets Received Count (Low) */ +#define IXGB_BPRCH 0x02014 /* Broadcast Packets Received Count (High) */ +#define IXGB_MPRCL 0x02018 /* Multicast Packets Received Count (Low) */ +#define IXGB_MPRCH 0x0201C /* Multicast Packets Received Count (High) */ +#define IXGB_UPRCL 0x02020 /* Unicast Packets Received Count (Low) */ +#define IXGB_UPRCH 0x02024 /* Unicast Packets Received Count (High) */ +#define IXGB_VPRCL 0x02028 /* VLAN Packets Received Count (Low) */ +#define IXGB_VPRCH 0x0202C /* VLAN Packets Received Count (High) */ +#define IXGB_JPRCL 0x02030 /* Jumbo Packets Received Count (Low) */ +#define IXGB_JPRCH 0x02034 /* Jumbo Packets Received Count (High) */ +#define IXGB_GORCL 0x02038 /* Good Octets Received Count (Low) */ +#define IXGB_GORCH 0x0203C /* Good Octets Received Count (High) */ +#define IXGB_TORL 0x02040 /* Total Octets Received (Low) */ +#define IXGB_TORH 0x02044 /* Total Octets Received (High) */ +#define IXGB_RNBC 0x02048 /* Receive No Buffers Count */ +#define IXGB_RUC 0x02050 /* Receive Undersize Count */ +#define IXGB_ROC 0x02058 /* Receive Oversize Count */ +#define IXGB_RLEC 0x02060 /* Receive Length Error Count */ +#define IXGB_CRCERRS 0x02068 /* CRC Error Count */ +#define IXGB_ICBC 0x02070 /* Illegal control byte in mid-packet Count */ +#define IXGB_ECBC 0x02078 /* Error Control byte in mid-packet Count */ +#define IXGB_MPC 0x02080 /* Missed Packets Count */ +#define IXGB_TPTL 0x02100 /* Total Packets Transmitted (Low) */ +#define IXGB_TPTH 0x02104 /* Total Packets Transmitted (High) */ +#define IXGB_GPTCL 0x02108 /* Good Packets Transmitted Count (Low) */ +#define IXGB_GPTCH 0x0210C /* Good Packets Transmitted Count (High) */ +#define IXGB_BPTCL 0x02110 /* Broadcast Packets Transmitted Count (Low) */ +#define IXGB_BPTCH 0x02114 /* Broadcast Packets Transmitted Count (High) */ +#define IXGB_MPTCL 0x02118 /* Multicast Packets Transmitted Count (Low) */ +#define IXGB_MPTCH 0x0211C /* Multicast Packets Transmitted Count (High) */ +#define IXGB_UPTCL 0x02120 /* Unicast Packets Transmitted Count (Low) */ +#define IXGB_UPTCH 0x02124 /* Unicast Packets Transmitted Count (High) */ +#define IXGB_VPTCL 0x02128 /* VLAN Packets Transmitted Count (Low) */ +#define IXGB_VPTCH 0x0212C /* VLAN Packets Transmitted Count (High) */ +#define IXGB_JPTCL 0x02130 /* Jumbo Packets Transmitted Count (Low) */ +#define IXGB_JPTCH 0x02134 /* Jumbo Packets Transmitted Count (High) */ +#define IXGB_GOTCL 0x02138 /* Good Octets Transmitted Count (Low) */ +#define IXGB_GOTCH 0x0213C /* Good Octets Transmitted Count (High) */ +#define IXGB_TOTL 0x02140 /* Total Octets Transmitted Count (Low) */ +#define IXGB_TOTH 0x02144 /* Total Octets Transmitted Count (High) */ +#define IXGB_DC 0x02148 /* Defer Count */ +#define IXGB_PLT64C 0x02150 /* Packet Transmitted was less than 64 bytes Count */ +#define IXGB_TSCTC 0x02170 /* TCP Segmentation Context Transmitted Count */ +#define IXGB_TSCTFC 0x02178 /* TCP Segmentation Context Tx Fail Count */ +#define IXGB_IBIC 0x02180 /* Illegal byte during Idle stream count */ +#define IXGB_RFC 0x02188 /* Remote Fault Count */ +#define IXGB_LFC 0x02190 /* Local Fault Count */ +#define IXGB_PFRC 0x02198 /* Pause Frame Receive Count */ +#define IXGB_PFTC 0x021A0 /* Pause Frame Transmit Count */ +#define IXGB_MCFRC 0x021A8 /* MAC Control Frames (non-Pause) Received Count */ +#define IXGB_MCFTC 0x021B0 /* MAC Control Frames (non-Pause) Transmitted Count */ +#define IXGB_XONRXC 0x021B8 /* XON Received Count */ +#define IXGB_XONTXC 0x021C0 /* XON Transmitted Count */ +#define IXGB_XOFFRXC 0x021C8 /* XOFF Received Count */ +#define IXGB_XOFFTXC 0x021D0 /* XOFF Transmitted Count */ +#define IXGB_RJC 0x021D8 /* Receive Jabber Count */ + +/* CTRL0 Bit Masks */ +#define IXGB_CTRL0_LRST 0x00000008 +#define IXGB_CTRL0_JFE 0x00000010 +#define IXGB_CTRL0_XLE 0x00000020 +#define IXGB_CTRL0_MDCS 0x00000040 +#define IXGB_CTRL0_CMDC 0x00000080 +#define IXGB_CTRL0_SDP0 0x00040000 +#define IXGB_CTRL0_SDP1 0x00080000 +#define IXGB_CTRL0_SDP2 0x00100000 +#define IXGB_CTRL0_SDP3 0x00200000 +#define IXGB_CTRL0_SDP0_DIR 0x00400000 +#define IXGB_CTRL0_SDP1_DIR 0x00800000 +#define IXGB_CTRL0_SDP2_DIR 0x01000000 +#define IXGB_CTRL0_SDP3_DIR 0x02000000 +#define IXGB_CTRL0_RST 0x04000000 +#define IXGB_CTRL0_RPE 0x08000000 +#define IXGB_CTRL0_TPE 0x10000000 +#define IXGB_CTRL0_VME 0x40000000 + +/* CTRL1 Bit Masks */ +#define IXGB_CTRL1_GPI0_EN 0x00000001 +#define IXGB_CTRL1_GPI1_EN 0x00000002 +#define IXGB_CTRL1_GPI2_EN 0x00000004 +#define IXGB_CTRL1_GPI3_EN 0x00000008 +#define IXGB_CTRL1_SDP4 0x00000010 +#define IXGB_CTRL1_SDP5 0x00000020 +#define IXGB_CTRL1_SDP6 0x00000040 +#define IXGB_CTRL1_SDP7 0x00000080 +#define IXGB_CTRL1_SDP4_DIR 0x00000100 +#define IXGB_CTRL1_SDP5_DIR 0x00000200 +#define IXGB_CTRL1_SDP6_DIR 0x00000400 +#define IXGB_CTRL1_SDP7_DIR 0x00000800 +#define IXGB_CTRL1_EE_RST 0x00002000 +#define IXGB_CTRL1_RO_DIS 0x00020000 +#define IXGB_CTRL1_PCIXHM_MASK 0x00C00000 +#define IXGB_CTRL1_PCIXHM_1_2 0x00000000 +#define IXGB_CTRL1_PCIXHM_5_8 0x00400000 +#define IXGB_CTRL1_PCIXHM_3_4 0x00800000 +#define IXGB_CTRL1_PCIXHM_7_8 0x00C00000 + +/* STATUS Bit Masks */ +#define IXGB_STATUS_LU 0x00000002 +#define IXGB_STATUS_AIP 0x00000004 +#define IXGB_STATUS_TXOFF 0x00000010 +#define IXGB_STATUS_XAUIME 0x00000020 +#define IXGB_STATUS_RES 0x00000040 +#define IXGB_STATUS_RIS 0x00000080 +#define IXGB_STATUS_RIE 0x00000100 +#define IXGB_STATUS_RLF 0x00000200 +#define IXGB_STATUS_RRF 0x00000400 +#define IXGB_STATUS_PCI_SPD 0x00000800 +#define IXGB_STATUS_BUS64 0x00001000 +#define IXGB_STATUS_PCIX_MODE 0x00002000 +#define IXGB_STATUS_PCIX_SPD_MASK 0x0000C000 +#define IXGB_STATUS_PCIX_SPD_66 0x00000000 +#define IXGB_STATUS_PCIX_SPD_100 0x00004000 +#define IXGB_STATUS_PCIX_SPD_133 0x00008000 +#define IXGB_STATUS_REV_ID_MASK 0x000F0000 +#define IXGB_STATUS_REV_ID_SHIFT 16 + +/* EECD Bit Masks */ +#define IXGB_EECD_SK 0x00000001 +#define IXGB_EECD_CS 0x00000002 +#define IXGB_EECD_DI 0x00000004 +#define IXGB_EECD_DO 0x00000008 +#define IXGB_EECD_FWE_MASK 0x00000030 +#define IXGB_EECD_FWE_DIS 0x00000010 +#define IXGB_EECD_FWE_EN 0x00000020 + +/* MFS */ +#define IXGB_MFS_SHIFT 16 + +/* Interrupt Register Bit Masks (used for ICR, ICS, IMS, and IMC) */ +#define IXGB_INT_TXDW 0x00000001 +#define IXGB_INT_TXQE 0x00000002 +#define IXGB_INT_LSC 0x00000004 +#define IXGB_INT_RXSEQ 0x00000008 +#define IXGB_INT_RXDMT0 0x00000010 +#define IXGB_INT_RXO 0x00000040 +#define IXGB_INT_RXT0 0x00000080 +#define IXGB_INT_AUTOSCAN 0x00000200 +#define IXGB_INT_GPI0 0x00000800 +#define IXGB_INT_GPI1 0x00001000 +#define IXGB_INT_GPI2 0x00002000 +#define IXGB_INT_GPI3 0x00004000 + +/* RCTL Bit Masks */ +#define IXGB_RCTL_RXEN 0x00000002 +#define IXGB_RCTL_SBP 0x00000004 +#define IXGB_RCTL_UPE 0x00000008 +#define IXGB_RCTL_MPE 0x00000010 +#define IXGB_RCTL_RDMTS_MASK 0x00000300 +#define IXGB_RCTL_RDMTS_1_2 0x00000000 +#define IXGB_RCTL_RDMTS_1_4 0x00000100 +#define IXGB_RCTL_RDMTS_1_8 0x00000200 +#define IXGB_RCTL_MO_MASK 0x00003000 +#define IXGB_RCTL_MO_47_36 0x00000000 +#define IXGB_RCTL_MO_46_35 0x00001000 +#define IXGB_RCTL_MO_45_34 0x00002000 +#define IXGB_RCTL_MO_43_32 0x00003000 +#define IXGB_RCTL_MO_SHIFT 12 +#define IXGB_RCTL_BAM 0x00008000 +#define IXGB_RCTL_BSIZE_MASK 0x00030000 +#define IXGB_RCTL_BSIZE_2048 0x00000000 +#define IXGB_RCTL_BSIZE_4096 0x00010000 +#define IXGB_RCTL_BSIZE_8192 0x00020000 +#define IXGB_RCTL_BSIZE_16384 0x00030000 +#define IXGB_RCTL_VFE 0x00040000 +#define IXGB_RCTL_CFIEN 0x00080000 +#define IXGB_RCTL_CFI 0x00100000 +#define IXGB_RCTL_RPDA_MASK 0x00600000 +#define IXGB_RCTL_RPDA_MC_MAC 0x00000000 +#define IXGB_RCTL_MC_ONLY 0x00400000 +#define IXGB_RCTL_CFF 0x00800000 +#define IXGB_RCTL_SECRC 0x04000000 +#define IXGB_RDT_FPDB 0x80000000 + +#define IXGB_RCTL_IDLE_RX_UNIT 0 + +/* FCRTL Bit Masks */ +#define IXGB_FCRTL_XONE 0x80000000 + +/* RXDCTL Bit Masks */ +#define IXGB_RXDCTL_PTHRESH_MASK 0x000001FF +#define IXGB_RXDCTL_PTHRESH_SHIFT 0 +#define IXGB_RXDCTL_HTHRESH_MASK 0x0003FE00 +#define IXGB_RXDCTL_HTHRESH_SHIFT 9 +#define IXGB_RXDCTL_WTHRESH_MASK 0x07FC0000 +#define IXGB_RXDCTL_WTHRESH_SHIFT 18 + +/* RAIDC Bit Masks */ +#define IXGB_RAIDC_HIGHTHRS_MASK 0x0000003F +#define IXGB_RAIDC_DELAY_MASK 0x000FF800 +#define IXGB_RAIDC_DELAY_SHIFT 11 +#define IXGB_RAIDC_POLL_MASK 0x1FF00000 +#define IXGB_RAIDC_POLL_SHIFT 20 +#define IXGB_RAIDC_RXT_GATE 0x40000000 +#define IXGB_RAIDC_EN 0x80000000 + +#define IXGB_RAIDC_POLL_1000_INTERRUPTS_PER_SECOND 1220 +#define IXGB_RAIDC_POLL_5000_INTERRUPTS_PER_SECOND 244 +#define IXGB_RAIDC_POLL_10000_INTERRUPTS_PER_SECOND 122 +#define IXGB_RAIDC_POLL_20000_INTERRUPTS_PER_SECOND 61 + +/* RXCSUM Bit Masks */ +#define IXGB_RXCSUM_IPOFL 0x00000100 +#define IXGB_RXCSUM_TUOFL 0x00000200 + +/* RAH Bit Masks */ +#define IXGB_RAH_ASEL_MASK 0x00030000 +#define IXGB_RAH_ASEL_DEST 0x00000000 +#define IXGB_RAH_ASEL_SRC 0x00010000 +#define IXGB_RAH_AV 0x80000000 + +/* TCTL Bit Masks */ +#define IXGB_TCTL_TCE 0x00000001 +#define IXGB_TCTL_TXEN 0x00000002 +#define IXGB_TCTL_TPDE 0x00000004 + +#define IXGB_TCTL_IDLE_TX_UNIT 0 + +/* TXDCTL Bit Masks */ +#define IXGB_TXDCTL_PTHRESH_MASK 0x0000007F +#define IXGB_TXDCTL_HTHRESH_MASK 0x00007F00 +#define IXGB_TXDCTL_HTHRESH_SHIFT 8 +#define IXGB_TXDCTL_WTHRESH_MASK 0x007F0000 +#define IXGB_TXDCTL_WTHRESH_SHIFT 16 + +/* TSPMT Bit Masks */ +#define IXGB_TSPMT_TSMT_MASK 0x0000FFFF +#define IXGB_TSPMT_TSPBP_MASK 0xFFFF0000 +#define IXGB_TSPMT_TSPBP_SHIFT 16 + +/* PAP Bit Masks */ +#define IXGB_PAP_TXPC_MASK 0x0000FFFF +#define IXGB_PAP_TXPV_MASK 0x000F0000 +#define IXGB_PAP_TXPV_10G 0x00000000 +#define IXGB_PAP_TXPV_1G 0x00010000 +#define IXGB_PAP_TXPV_2G 0x00020000 +#define IXGB_PAP_TXPV_3G 0x00030000 +#define IXGB_PAP_TXPV_4G 0x00040000 +#define IXGB_PAP_TXPV_5G 0x00050000 +#define IXGB_PAP_TXPV_6G 0x00060000 +#define IXGB_PAP_TXPV_7G 0x00070000 +#define IXGB_PAP_TXPV_8G 0x00080000 +#define IXGB_PAP_TXPV_9G 0x00090000 +#define IXGB_PAP_TXPV_WAN 0x000F0000 + +/* PCSC1 Bit Masks */ +#define IXGB_PCSC1_LOOPBACK 0x00004000 + +/* PCSC2 Bit Masks */ +#define IXGB_PCSC2_PCS_TYPE_MASK 0x00000003 +#define IXGB_PCSC2_PCS_TYPE_10GBX 0x00000001 + +/* PCSS1 Bit Masks */ +#define IXGB_PCSS1_LOCAL_FAULT 0x00000080 +#define IXGB_PCSS1_RX_LINK_STATUS 0x00000004 + +/* PCSS2 Bit Masks */ +#define IXGB_PCSS2_DEV_PRES_MASK 0x0000C000 +#define IXGB_PCSS2_DEV_PRES 0x00004000 +#define IXGB_PCSS2_TX_LF 0x00000800 +#define IXGB_PCSS2_RX_LF 0x00000400 +#define IXGB_PCSS2_10GBW 0x00000004 +#define IXGB_PCSS2_10GBX 0x00000002 +#define IXGB_PCSS2_10GBR 0x00000001 + +/* XPCSS Bit Masks */ +#define IXGB_XPCSS_ALIGN_STATUS 0x00001000 +#define IXGB_XPCSS_PATTERN_TEST 0x00000800 +#define IXGB_XPCSS_LANE_3_SYNC 0x00000008 +#define IXGB_XPCSS_LANE_2_SYNC 0x00000004 +#define IXGB_XPCSS_LANE_1_SYNC 0x00000002 +#define IXGB_XPCSS_LANE_0_SYNC 0x00000001 + +/* XPCSTC Bit Masks */ +#define IXGB_XPCSTC_BERT_TRIG 0x00200000 +#define IXGB_XPCSTC_BERT_SST 0x00100000 +#define IXGB_XPCSTC_BERT_PSZ_MASK 0x000C0000 +#define IXGB_XPCSTC_BERT_PSZ_SHIFT 17 +#define IXGB_XPCSTC_BERT_PSZ_INF 0x00000003 +#define IXGB_XPCSTC_BERT_PSZ_68 0x00000001 +#define IXGB_XPCSTC_BERT_PSZ_1028 0x00000000 + +/* MSCA bit Masks */ +/* New Protocol Address */ +#define IXGB_MSCA_NP_ADDR_MASK 0x0000FFFF +#define IXGB_MSCA_NP_ADDR_SHIFT 0 +/* Either Device Type or Register Address,depending on ST_CODE */ +#define IXGB_MSCA_DEV_TYPE_MASK 0x001F0000 +#define IXGB_MSCA_DEV_TYPE_SHIFT 16 +#define IXGB_MSCA_PHY_ADDR_MASK 0x03E00000 +#define IXGB_MSCA_PHY_ADDR_SHIFT 21 +#define IXGB_MSCA_OP_CODE_MASK 0x0C000000 +/* OP_CODE == 00, Address cycle, New Protocol */ +/* OP_CODE == 01, Write operation */ +/* OP_CODE == 10, Read operation */ +/* OP_CODE == 11, Read, auto increment, New Protocol */ +#define IXGB_MSCA_ADDR_CYCLE 0x00000000 +#define IXGB_MSCA_WRITE 0x04000000 +#define IXGB_MSCA_READ 0x08000000 +#define IXGB_MSCA_READ_AUTOINC 0x0C000000 +#define IXGB_MSCA_OP_CODE_SHIFT 26 +#define IXGB_MSCA_ST_CODE_MASK 0x30000000 +/* ST_CODE == 00, New Protocol */ +/* ST_CODE == 01, Old Protocol */ +#define IXGB_MSCA_NEW_PROTOCOL 0x00000000 +#define IXGB_MSCA_OLD_PROTOCOL 0x10000000 +#define IXGB_MSCA_ST_CODE_SHIFT 28 +/* Initiate command, self-clearing when command completes */ +#define IXGB_MSCA_MDI_COMMAND 0x40000000 +/*MDI In Progress Enable. */ +#define IXGB_MSCA_MDI_IN_PROG_EN 0x80000000 + +/* MSRWD bit masks */ +#define IXGB_MSRWD_WRITE_DATA_MASK 0x0000FFFF +#define IXGB_MSRWD_WRITE_DATA_SHIFT 0 +#define IXGB_MSRWD_READ_DATA_MASK 0xFFFF0000 +#define IXGB_MSRWD_READ_DATA_SHIFT 16 + +/* Definitions for the optics devices on the MDIO bus. */ +#define IXGB_PHY_ADDRESS 0x0 /* Single PHY, multiple "Devices" */ + +#define MDIO_PMA_PMD_XPAK_VENDOR_NAME 0x803A /* XPAK/XENPAK devices only */ + +/* Vendor-specific MDIO registers */ +#define G6XXX_PMA_PMD_VS1 0xC001 /* Vendor-specific register */ +#define G6XXX_XGXS_XAUI_VS2 0x18 /* Vendor-specific register */ + +#define G6XXX_PMA_PMD_VS1_PLL_RESET 0x80 +#define G6XXX_PMA_PMD_VS1_REMOVE_PLL_RESET 0x00 +#define G6XXX_XGXS_XAUI_VS2_INPUT_MASK 0x0F /* XAUI lanes synchronized */ + +/* Layout of a single receive descriptor. The controller assumes that this + * structure is packed into 16 bytes, which is a safe assumption with most + * compilers. However, some compilers may insert padding between the fields, + * in which case the structure must be packed in some compiler-specific + * manner. */ +struct ixgb_rx_desc { + __le64 buff_addr; + __le16 length; + __le16 reserved; + u8 status; + u8 errors; + __le16 special; +}; + +#define IXGB_RX_DESC_STATUS_DD 0x01 +#define IXGB_RX_DESC_STATUS_EOP 0x02 +#define IXGB_RX_DESC_STATUS_IXSM 0x04 +#define IXGB_RX_DESC_STATUS_VP 0x08 +#define IXGB_RX_DESC_STATUS_TCPCS 0x20 +#define IXGB_RX_DESC_STATUS_IPCS 0x40 +#define IXGB_RX_DESC_STATUS_PIF 0x80 + +#define IXGB_RX_DESC_ERRORS_CE 0x01 +#define IXGB_RX_DESC_ERRORS_SE 0x02 +#define IXGB_RX_DESC_ERRORS_P 0x08 +#define IXGB_RX_DESC_ERRORS_TCPE 0x20 +#define IXGB_RX_DESC_ERRORS_IPE 0x40 +#define IXGB_RX_DESC_ERRORS_RXE 0x80 + +#define IXGB_RX_DESC_SPECIAL_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */ +#define IXGB_RX_DESC_SPECIAL_PRI_MASK 0xE000 /* Priority is in upper 3 bits */ +#define IXGB_RX_DESC_SPECIAL_PRI_SHIFT 0x000D /* Priority is in upper 3 of 16 */ + +/* Layout of a single transmit descriptor. The controller assumes that this + * structure is packed into 16 bytes, which is a safe assumption with most + * compilers. However, some compilers may insert padding between the fields, + * in which case the structure must be packed in some compiler-specific + * manner. */ +struct ixgb_tx_desc { + __le64 buff_addr; + __le32 cmd_type_len; + u8 status; + u8 popts; + __le16 vlan; +}; + +#define IXGB_TX_DESC_LENGTH_MASK 0x000FFFFF +#define IXGB_TX_DESC_TYPE_MASK 0x00F00000 +#define IXGB_TX_DESC_TYPE_SHIFT 20 +#define IXGB_TX_DESC_CMD_MASK 0xFF000000 +#define IXGB_TX_DESC_CMD_SHIFT 24 +#define IXGB_TX_DESC_CMD_EOP 0x01000000 +#define IXGB_TX_DESC_CMD_TSE 0x04000000 +#define IXGB_TX_DESC_CMD_RS 0x08000000 +#define IXGB_TX_DESC_CMD_VLE 0x40000000 +#define IXGB_TX_DESC_CMD_IDE 0x80000000 + +#define IXGB_TX_DESC_TYPE 0x00100000 + +#define IXGB_TX_DESC_STATUS_DD 0x01 + +#define IXGB_TX_DESC_POPTS_IXSM 0x01 +#define IXGB_TX_DESC_POPTS_TXSM 0x02 +#define IXGB_TX_DESC_SPECIAL_PRI_SHIFT IXGB_RX_DESC_SPECIAL_PRI_SHIFT /* Priority is in upper 3 of 16 */ + +struct ixgb_context_desc { + u8 ipcss; + u8 ipcso; + __le16 ipcse; + u8 tucss; + u8 tucso; + __le16 tucse; + __le32 cmd_type_len; + u8 status; + u8 hdr_len; + __le16 mss; +}; + +#define IXGB_CONTEXT_DESC_CMD_TCP 0x01000000 +#define IXGB_CONTEXT_DESC_CMD_IP 0x02000000 +#define IXGB_CONTEXT_DESC_CMD_TSE 0x04000000 +#define IXGB_CONTEXT_DESC_CMD_RS 0x08000000 +#define IXGB_CONTEXT_DESC_CMD_IDE 0x80000000 + +#define IXGB_CONTEXT_DESC_TYPE 0x00000000 + +#define IXGB_CONTEXT_DESC_STATUS_DD 0x01 + +/* Filters */ +#define IXGB_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */ +#define IXGB_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */ +#define IXGB_RAR_ENTRIES 3 /* Number of entries in Rx Address array */ + +#define IXGB_MEMORY_REGISTER_BASE_ADDRESS 0 +#define ENET_HEADER_SIZE 14 +#define ENET_FCS_LENGTH 4 +#define IXGB_MAX_NUM_MULTICAST_ADDRESSES 128 +#define IXGB_MIN_ENET_FRAME_SIZE_WITHOUT_FCS 60 +#define IXGB_MAX_ENET_FRAME_SIZE_WITHOUT_FCS 1514 +#define IXGB_MAX_JUMBO_FRAME_SIZE 0x3F00 + +/* Phy Addresses */ +#define IXGB_OPTICAL_PHY_ADDR 0x0 /* Optical Module phy address */ +#define IXGB_XAUII_PHY_ADDR 0x1 /* Xauii transceiver phy address */ +#define IXGB_DIAG_PHY_ADDR 0x1F /* Diagnostic Device phy address */ + +/* This structure takes a 64k flash and maps it for identification commands */ +struct ixgb_flash_buffer { + u8 manufacturer_id; + u8 device_id; + u8 filler1[0x2AA8]; + u8 cmd2; + u8 filler2[0x2AAA]; + u8 cmd1; + u8 filler3[0xAAAA]; +}; + +/* Flow control parameters */ +struct ixgb_fc { + u32 high_water; /* Flow Control High-water */ + u32 low_water; /* Flow Control Low-water */ + u16 pause_time; /* Flow Control Pause timer */ + bool send_xon; /* Flow control send XON */ + ixgb_fc_type type; /* Type of flow control */ +}; + +/* The historical defaults for the flow control values are given below. */ +#define FC_DEFAULT_HI_THRESH (0x8000) /* 32KB */ +#define FC_DEFAULT_LO_THRESH (0x4000) /* 16KB */ +#define FC_DEFAULT_TX_TIMER (0x100) /* ~130 us */ + +/* Phy definitions */ +#define IXGB_MAX_PHY_REG_ADDRESS 0xFFFF +#define IXGB_MAX_PHY_ADDRESS 31 +#define IXGB_MAX_PHY_DEV_TYPE 31 + +/* Bus parameters */ +struct ixgb_bus { + ixgb_bus_speed speed; + ixgb_bus_width width; + ixgb_bus_type type; +}; + +struct ixgb_hw { + u8 __iomem *hw_addr;/* Base Address of the hardware */ + void *back; /* Pointer to OS-dependent struct */ + struct ixgb_fc fc; /* Flow control parameters */ + struct ixgb_bus bus; /* Bus parameters */ + u32 phy_id; /* Phy Identifier */ + u32 phy_addr; /* XGMII address of Phy */ + ixgb_mac_type mac_type; /* Identifier for MAC controller */ + ixgb_phy_type phy_type; /* Transceiver/phy identifier */ + u32 max_frame_size; /* Maximum frame size supported */ + u32 mc_filter_type; /* Multicast filter hash type */ + u32 num_mc_addrs; /* Number of current Multicast addrs */ + u8 curr_mac_addr[ETH_ALEN]; /* Individual address currently programmed in MAC */ + u32 num_tx_desc; /* Number of Transmit descriptors */ + u32 num_rx_desc; /* Number of Receive descriptors */ + u32 rx_buffer_size; /* Size of Receive buffer */ + bool link_up; /* true if link is valid */ + bool adapter_stopped; /* State of adapter */ + u16 device_id; /* device id from PCI configuration space */ + u16 vendor_id; /* vendor id from PCI configuration space */ + u8 revision_id; /* revision id from PCI configuration space */ + u16 subsystem_vendor_id; /* subsystem vendor id from PCI configuration space */ + u16 subsystem_id; /* subsystem id from PCI configuration space */ + u32 bar0; /* Base Address registers */ + u32 bar1; + u32 bar2; + u32 bar3; + u16 pci_cmd_word; /* PCI command register id from PCI configuration space */ + __le16 eeprom[IXGB_EEPROM_SIZE]; /* EEPROM contents read at init time */ + unsigned long io_base; /* Our I/O mapped location */ + u32 lastLFC; + u32 lastRFC; +}; + +/* Statistics reported by the hardware */ +struct ixgb_hw_stats { + u64 tprl; + u64 tprh; + u64 gprcl; + u64 gprch; + u64 bprcl; + u64 bprch; + u64 mprcl; + u64 mprch; + u64 uprcl; + u64 uprch; + u64 vprcl; + u64 vprch; + u64 jprcl; + u64 jprch; + u64 gorcl; + u64 gorch; + u64 torl; + u64 torh; + u64 rnbc; + u64 ruc; + u64 roc; + u64 rlec; + u64 crcerrs; + u64 icbc; + u64 ecbc; + u64 mpc; + u64 tptl; + u64 tpth; + u64 gptcl; + u64 gptch; + u64 bptcl; + u64 bptch; + u64 mptcl; + u64 mptch; + u64 uptcl; + u64 uptch; + u64 vptcl; + u64 vptch; + u64 jptcl; + u64 jptch; + u64 gotcl; + u64 gotch; + u64 totl; + u64 toth; + u64 dc; + u64 plt64c; + u64 tsctc; + u64 tsctfc; + u64 ibic; + u64 rfc; + u64 lfc; + u64 pfrc; + u64 pftc; + u64 mcfrc; + u64 mcftc; + u64 xonrxc; + u64 xontxc; + u64 xoffrxc; + u64 xofftxc; + u64 rjc; +}; + +/* Function Prototypes */ +bool ixgb_adapter_stop(struct ixgb_hw *hw); +bool ixgb_init_hw(struct ixgb_hw *hw); +bool ixgb_adapter_start(struct ixgb_hw *hw); +void ixgb_check_for_link(struct ixgb_hw *hw); +bool ixgb_check_for_bad_link(struct ixgb_hw *hw); + +void ixgb_rar_set(struct ixgb_hw *hw, u8 *addr, u32 index); + +/* Filters (multicast, vlan, receive) */ +void ixgb_mc_addr_list_update(struct ixgb_hw *hw, u8 *mc_addr_list, + u32 mc_addr_count, u32 pad); + +/* Vfta functions */ +void ixgb_write_vfta(struct ixgb_hw *hw, u32 offset, u32 value); + +/* Access functions to eeprom data */ +void ixgb_get_ee_mac_addr(struct ixgb_hw *hw, u8 *mac_addr); +u32 ixgb_get_ee_pba_number(struct ixgb_hw *hw); +u16 ixgb_get_ee_device_id(struct ixgb_hw *hw); +bool ixgb_get_eeprom_data(struct ixgb_hw *hw); +__le16 ixgb_get_eeprom_word(struct ixgb_hw *hw, u16 index); + +/* Everything else */ +void ixgb_led_on(struct ixgb_hw *hw); +void ixgb_led_off(struct ixgb_hw *hw); +void ixgb_write_pci_cfg(struct ixgb_hw *hw, + u32 reg, + u16 * value); + + +#endif /* _IXGB_HW_H_ */ diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_ids.h b/drivers/net/ethernet/intel/ixgb/ixgb_ids.h new file mode 100644 index 00000000000..32c1b302d79 --- /dev/null +++ b/drivers/net/ethernet/intel/ixgb/ixgb_ids.h @@ -0,0 +1,48 @@ +/******************************************************************************* + + Intel PRO/10GbE Linux driver + Copyright(c) 1999 - 2008 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _IXGB_IDS_H_ +#define _IXGB_IDS_H_ + +/********************************************************************** +** The Device and Vendor IDs for 10 Gigabit MACs +**********************************************************************/ + +#define IXGB_DEVICE_ID_82597EX 0x1048 +#define IXGB_DEVICE_ID_82597EX_SR 0x1A48 +#define IXGB_DEVICE_ID_82597EX_LR 0x1B48 +#define IXGB_SUBDEVICE_ID_A11F 0xA11F +#define IXGB_SUBDEVICE_ID_A01F 0xA01F + +#define IXGB_DEVICE_ID_82597EX_CX4 0x109E +#define IXGB_SUBDEVICE_ID_A00C 0xA00C +#define IXGB_SUBDEVICE_ID_A01C 0xA01C +#define IXGB_SUBDEVICE_ID_7036 0x7036 + +#endif /* #ifndef _IXGB_IDS_H_ */ +/* End of File */ diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_main.c b/drivers/net/ethernet/intel/ixgb/ixgb_main.c new file mode 100644 index 00000000000..60801273915 --- /dev/null +++ b/drivers/net/ethernet/intel/ixgb/ixgb_main.c @@ -0,0 +1,2367 @@ +/******************************************************************************* + + Intel PRO/10GbE Linux driver + Copyright(c) 1999 - 2008 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/prefetch.h> +#include "ixgb.h" + +char ixgb_driver_name[] = "ixgb"; +static char ixgb_driver_string[] = "Intel(R) PRO/10GbE Network Driver"; + +#define DRIVERNAPI "-NAPI" +#define DRV_VERSION "1.0.135-k2" DRIVERNAPI +const char ixgb_driver_version[] = DRV_VERSION; +static const char ixgb_copyright[] = "Copyright (c) 1999-2008 Intel Corporation."; + +#define IXGB_CB_LENGTH 256 +static unsigned int copybreak __read_mostly = IXGB_CB_LENGTH; +module_param(copybreak, uint, 0644); +MODULE_PARM_DESC(copybreak, + "Maximum size of packet that is copied to a new buffer on receive"); + +/* ixgb_pci_tbl - PCI Device ID Table + * + * Wildcard entries (PCI_ANY_ID) should come last + * Last entry must be all 0s + * + * { Vendor ID, Device ID, SubVendor ID, SubDevice ID, + * Class, Class Mask, private data (not used) } + */ +static DEFINE_PCI_DEVICE_TABLE(ixgb_pci_tbl) = { + {PCI_VENDOR_ID_INTEL, IXGB_DEVICE_ID_82597EX, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_INTEL, IXGB_DEVICE_ID_82597EX_CX4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_INTEL, IXGB_DEVICE_ID_82597EX_SR, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_INTEL, IXGB_DEVICE_ID_82597EX_LR, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + + /* required last entry */ + {0,} +}; + +MODULE_DEVICE_TABLE(pci, ixgb_pci_tbl); + +/* Local Function Prototypes */ +static int ixgb_init_module(void); +static void ixgb_exit_module(void); +static int ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent); +static void ixgb_remove(struct pci_dev *pdev); +static int ixgb_sw_init(struct ixgb_adapter *adapter); +static int ixgb_open(struct net_device *netdev); +static int ixgb_close(struct net_device *netdev); +static void ixgb_configure_tx(struct ixgb_adapter *adapter); +static void ixgb_configure_rx(struct ixgb_adapter *adapter); +static void ixgb_setup_rctl(struct ixgb_adapter *adapter); +static void ixgb_clean_tx_ring(struct ixgb_adapter *adapter); +static void ixgb_clean_rx_ring(struct ixgb_adapter *adapter); +static void ixgb_set_multi(struct net_device *netdev); +static void ixgb_watchdog(unsigned long data); +static netdev_tx_t ixgb_xmit_frame(struct sk_buff *skb, + struct net_device *netdev); +static struct net_device_stats *ixgb_get_stats(struct net_device *netdev); +static int ixgb_change_mtu(struct net_device *netdev, int new_mtu); +static int ixgb_set_mac(struct net_device *netdev, void *p); +static irqreturn_t ixgb_intr(int irq, void *data); +static bool ixgb_clean_tx_irq(struct ixgb_adapter *adapter); + +static int ixgb_clean(struct napi_struct *, int); +static bool ixgb_clean_rx_irq(struct ixgb_adapter *, int *, int); +static void ixgb_alloc_rx_buffers(struct ixgb_adapter *, int); + +static void ixgb_tx_timeout(struct net_device *dev); +static void ixgb_tx_timeout_task(struct work_struct *work); + +static void ixgb_vlan_strip_enable(struct ixgb_adapter *adapter); +static void ixgb_vlan_strip_disable(struct ixgb_adapter *adapter); +static int ixgb_vlan_rx_add_vid(struct net_device *netdev, + __be16 proto, u16 vid); +static int ixgb_vlan_rx_kill_vid(struct net_device *netdev, + __be16 proto, u16 vid); +static void ixgb_restore_vlan(struct ixgb_adapter *adapter); + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* for netdump / net console */ +static void ixgb_netpoll(struct net_device *dev); +#endif + +static pci_ers_result_t ixgb_io_error_detected (struct pci_dev *pdev, + enum pci_channel_state state); +static pci_ers_result_t ixgb_io_slot_reset (struct pci_dev *pdev); +static void ixgb_io_resume (struct pci_dev *pdev); + +static const struct pci_error_handlers ixgb_err_handler = { + .error_detected = ixgb_io_error_detected, + .slot_reset = ixgb_io_slot_reset, + .resume = ixgb_io_resume, +}; + +static struct pci_driver ixgb_driver = { + .name = ixgb_driver_name, + .id_table = ixgb_pci_tbl, + .probe = ixgb_probe, + .remove = ixgb_remove, + .err_handler = &ixgb_err_handler +}; + +MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>"); +MODULE_DESCRIPTION("Intel(R) PRO/10GbE Network Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK) +static int debug = -1; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); + +/** + * ixgb_init_module - Driver Registration Routine + * + * ixgb_init_module is the first routine called when the driver is + * loaded. All it does is register with the PCI subsystem. + **/ + +static int __init +ixgb_init_module(void) +{ + pr_info("%s - version %s\n", ixgb_driver_string, ixgb_driver_version); + pr_info("%s\n", ixgb_copyright); + + return pci_register_driver(&ixgb_driver); +} + +module_init(ixgb_init_module); + +/** + * ixgb_exit_module - Driver Exit Cleanup Routine + * + * ixgb_exit_module is called just before the driver is removed + * from memory. + **/ + +static void __exit +ixgb_exit_module(void) +{ + pci_unregister_driver(&ixgb_driver); +} + +module_exit(ixgb_exit_module); + +/** + * ixgb_irq_disable - Mask off interrupt generation on the NIC + * @adapter: board private structure + **/ + +static void +ixgb_irq_disable(struct ixgb_adapter *adapter) +{ + IXGB_WRITE_REG(&adapter->hw, IMC, ~0); + IXGB_WRITE_FLUSH(&adapter->hw); + synchronize_irq(adapter->pdev->irq); +} + +/** + * ixgb_irq_enable - Enable default interrupt generation settings + * @adapter: board private structure + **/ + +static void +ixgb_irq_enable(struct ixgb_adapter *adapter) +{ + u32 val = IXGB_INT_RXT0 | IXGB_INT_RXDMT0 | + IXGB_INT_TXDW | IXGB_INT_LSC; + if (adapter->hw.subsystem_vendor_id == PCI_VENDOR_ID_SUN) + val |= IXGB_INT_GPI0; + IXGB_WRITE_REG(&adapter->hw, IMS, val); + IXGB_WRITE_FLUSH(&adapter->hw); +} + +int +ixgb_up(struct ixgb_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + int err, irq_flags = IRQF_SHARED; + int max_frame = netdev->mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH; + struct ixgb_hw *hw = &adapter->hw; + + /* hardware has been reset, we need to reload some things */ + + ixgb_rar_set(hw, netdev->dev_addr, 0); + ixgb_set_multi(netdev); + + ixgb_restore_vlan(adapter); + + ixgb_configure_tx(adapter); + ixgb_setup_rctl(adapter); + ixgb_configure_rx(adapter); + ixgb_alloc_rx_buffers(adapter, IXGB_DESC_UNUSED(&adapter->rx_ring)); + + /* disable interrupts and get the hardware into a known state */ + IXGB_WRITE_REG(&adapter->hw, IMC, 0xffffffff); + + /* only enable MSI if bus is in PCI-X mode */ + if (IXGB_READ_REG(&adapter->hw, STATUS) & IXGB_STATUS_PCIX_MODE) { + err = pci_enable_msi(adapter->pdev); + if (!err) { + adapter->have_msi = true; + irq_flags = 0; + } + /* proceed to try to request regular interrupt */ + } + + err = request_irq(adapter->pdev->irq, ixgb_intr, irq_flags, + netdev->name, netdev); + if (err) { + if (adapter->have_msi) + pci_disable_msi(adapter->pdev); + netif_err(adapter, probe, adapter->netdev, + "Unable to allocate interrupt Error: %d\n", err); + return err; + } + + if ((hw->max_frame_size != max_frame) || + (hw->max_frame_size != + (IXGB_READ_REG(hw, MFS) >> IXGB_MFS_SHIFT))) { + + hw->max_frame_size = max_frame; + + IXGB_WRITE_REG(hw, MFS, hw->max_frame_size << IXGB_MFS_SHIFT); + + if (hw->max_frame_size > + IXGB_MAX_ENET_FRAME_SIZE_WITHOUT_FCS + ENET_FCS_LENGTH) { + u32 ctrl0 = IXGB_READ_REG(hw, CTRL0); + + if (!(ctrl0 & IXGB_CTRL0_JFE)) { + ctrl0 |= IXGB_CTRL0_JFE; + IXGB_WRITE_REG(hw, CTRL0, ctrl0); + } + } + } + + clear_bit(__IXGB_DOWN, &adapter->flags); + + napi_enable(&adapter->napi); + ixgb_irq_enable(adapter); + + netif_wake_queue(netdev); + + mod_timer(&adapter->watchdog_timer, jiffies); + + return 0; +} + +void +ixgb_down(struct ixgb_adapter *adapter, bool kill_watchdog) +{ + struct net_device *netdev = adapter->netdev; + + /* prevent the interrupt handler from restarting watchdog */ + set_bit(__IXGB_DOWN, &adapter->flags); + + napi_disable(&adapter->napi); + /* waiting for NAPI to complete can re-enable interrupts */ + ixgb_irq_disable(adapter); + free_irq(adapter->pdev->irq, netdev); + + if (adapter->have_msi) + pci_disable_msi(adapter->pdev); + + if (kill_watchdog) + del_timer_sync(&adapter->watchdog_timer); + + adapter->link_speed = 0; + adapter->link_duplex = 0; + netif_carrier_off(netdev); + netif_stop_queue(netdev); + + ixgb_reset(adapter); + ixgb_clean_tx_ring(adapter); + ixgb_clean_rx_ring(adapter); +} + +void +ixgb_reset(struct ixgb_adapter *adapter) +{ + struct ixgb_hw *hw = &adapter->hw; + + ixgb_adapter_stop(hw); + if (!ixgb_init_hw(hw)) + netif_err(adapter, probe, adapter->netdev, "ixgb_init_hw failed\n"); + + /* restore frame size information */ + IXGB_WRITE_REG(hw, MFS, hw->max_frame_size << IXGB_MFS_SHIFT); + if (hw->max_frame_size > + IXGB_MAX_ENET_FRAME_SIZE_WITHOUT_FCS + ENET_FCS_LENGTH) { + u32 ctrl0 = IXGB_READ_REG(hw, CTRL0); + if (!(ctrl0 & IXGB_CTRL0_JFE)) { + ctrl0 |= IXGB_CTRL0_JFE; + IXGB_WRITE_REG(hw, CTRL0, ctrl0); + } + } +} + +static netdev_features_t +ixgb_fix_features(struct net_device *netdev, netdev_features_t features) +{ + /* + * Tx VLAN insertion does not work per HW design when Rx stripping is + * disabled. + */ + if (!(features & NETIF_F_HW_VLAN_CTAG_RX)) + features &= ~NETIF_F_HW_VLAN_CTAG_TX; + + return features; +} + +static int +ixgb_set_features(struct net_device *netdev, netdev_features_t features) +{ + struct ixgb_adapter *adapter = netdev_priv(netdev); + netdev_features_t changed = features ^ netdev->features; + + if (!(changed & (NETIF_F_RXCSUM|NETIF_F_HW_VLAN_CTAG_RX))) + return 0; + + adapter->rx_csum = !!(features & NETIF_F_RXCSUM); + + if (netif_running(netdev)) { + ixgb_down(adapter, true); + ixgb_up(adapter); + ixgb_set_speed_duplex(netdev); + } else + ixgb_reset(adapter); + + return 0; +} + + +static const struct net_device_ops ixgb_netdev_ops = { + .ndo_open = ixgb_open, + .ndo_stop = ixgb_close, + .ndo_start_xmit = ixgb_xmit_frame, + .ndo_get_stats = ixgb_get_stats, + .ndo_set_rx_mode = ixgb_set_multi, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = ixgb_set_mac, + .ndo_change_mtu = ixgb_change_mtu, + .ndo_tx_timeout = ixgb_tx_timeout, + .ndo_vlan_rx_add_vid = ixgb_vlan_rx_add_vid, + .ndo_vlan_rx_kill_vid = ixgb_vlan_rx_kill_vid, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = ixgb_netpoll, +#endif + .ndo_fix_features = ixgb_fix_features, + .ndo_set_features = ixgb_set_features, +}; + +/** + * ixgb_probe - Device Initialization Routine + * @pdev: PCI device information struct + * @ent: entry in ixgb_pci_tbl + * + * Returns 0 on success, negative on failure + * + * ixgb_probe initializes an adapter identified by a pci_dev structure. + * The OS initialization, configuring of the adapter private structure, + * and a hardware reset occur. + **/ + +static int +ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + struct net_device *netdev = NULL; + struct ixgb_adapter *adapter; + static int cards_found = 0; + int pci_using_dac; + int i; + int err; + + err = pci_enable_device(pdev); + if (err) + return err; + + pci_using_dac = 0; + err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); + if (!err) { + pci_using_dac = 1; + } else { + err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + if (err) { + pr_err("No usable DMA configuration, aborting\n"); + goto err_dma_mask; + } + } + + err = pci_request_regions(pdev, ixgb_driver_name); + if (err) + goto err_request_regions; + + pci_set_master(pdev); + + netdev = alloc_etherdev(sizeof(struct ixgb_adapter)); + if (!netdev) { + err = -ENOMEM; + goto err_alloc_etherdev; + } + + SET_NETDEV_DEV(netdev, &pdev->dev); + + pci_set_drvdata(pdev, netdev); + adapter = netdev_priv(netdev); + adapter->netdev = netdev; + adapter->pdev = pdev; + adapter->hw.back = adapter; + adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE); + + adapter->hw.hw_addr = pci_ioremap_bar(pdev, BAR_0); + if (!adapter->hw.hw_addr) { + err = -EIO; + goto err_ioremap; + } + + for (i = BAR_1; i <= BAR_5; i++) { + if (pci_resource_len(pdev, i) == 0) + continue; + if (pci_resource_flags(pdev, i) & IORESOURCE_IO) { + adapter->hw.io_base = pci_resource_start(pdev, i); + break; + } + } + + netdev->netdev_ops = &ixgb_netdev_ops; + ixgb_set_ethtool_ops(netdev); + netdev->watchdog_timeo = 5 * HZ; + netif_napi_add(netdev, &adapter->napi, ixgb_clean, 64); + + strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); + + adapter->bd_number = cards_found; + adapter->link_speed = 0; + adapter->link_duplex = 0; + + /* setup the private structure */ + + err = ixgb_sw_init(adapter); + if (err) + goto err_sw_init; + + netdev->hw_features = NETIF_F_SG | + NETIF_F_TSO | + NETIF_F_HW_CSUM | + NETIF_F_HW_VLAN_CTAG_TX | + NETIF_F_HW_VLAN_CTAG_RX; + netdev->features = netdev->hw_features | + NETIF_F_HW_VLAN_CTAG_FILTER; + netdev->hw_features |= NETIF_F_RXCSUM; + + if (pci_using_dac) { + netdev->features |= NETIF_F_HIGHDMA; + netdev->vlan_features |= NETIF_F_HIGHDMA; + } + + /* make sure the EEPROM is good */ + + if (!ixgb_validate_eeprom_checksum(&adapter->hw)) { + netif_err(adapter, probe, adapter->netdev, + "The EEPROM Checksum Is Not Valid\n"); + err = -EIO; + goto err_eeprom; + } + + ixgb_get_ee_mac_addr(&adapter->hw, netdev->dev_addr); + + if (!is_valid_ether_addr(netdev->dev_addr)) { + netif_err(adapter, probe, adapter->netdev, "Invalid MAC Address\n"); + err = -EIO; + goto err_eeprom; + } + + adapter->part_num = ixgb_get_ee_pba_number(&adapter->hw); + + init_timer(&adapter->watchdog_timer); + adapter->watchdog_timer.function = ixgb_watchdog; + adapter->watchdog_timer.data = (unsigned long)adapter; + + INIT_WORK(&adapter->tx_timeout_task, ixgb_tx_timeout_task); + + strcpy(netdev->name, "eth%d"); + err = register_netdev(netdev); + if (err) + goto err_register; + + /* carrier off reporting is important to ethtool even BEFORE open */ + netif_carrier_off(netdev); + + netif_info(adapter, probe, adapter->netdev, + "Intel(R) PRO/10GbE Network Connection\n"); + ixgb_check_options(adapter); + /* reset the hardware with the new settings */ + + ixgb_reset(adapter); + + cards_found++; + return 0; + +err_register: +err_sw_init: +err_eeprom: + iounmap(adapter->hw.hw_addr); +err_ioremap: + free_netdev(netdev); +err_alloc_etherdev: + pci_release_regions(pdev); +err_request_regions: +err_dma_mask: + pci_disable_device(pdev); + return err; +} + +/** + * ixgb_remove - Device Removal Routine + * @pdev: PCI device information struct + * + * ixgb_remove is called by the PCI subsystem to alert the driver + * that it should release a PCI device. The could be caused by a + * Hot-Plug event, or because the driver is going to be removed from + * memory. + **/ + +static void +ixgb_remove(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct ixgb_adapter *adapter = netdev_priv(netdev); + + cancel_work_sync(&adapter->tx_timeout_task); + + unregister_netdev(netdev); + + iounmap(adapter->hw.hw_addr); + pci_release_regions(pdev); + + free_netdev(netdev); + pci_disable_device(pdev); +} + +/** + * ixgb_sw_init - Initialize general software structures (struct ixgb_adapter) + * @adapter: board private structure to initialize + * + * ixgb_sw_init initializes the Adapter private data structure. + * Fields are initialized based on PCI device information and + * OS network device settings (MTU size). + **/ + +static int +ixgb_sw_init(struct ixgb_adapter *adapter) +{ + struct ixgb_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + + /* PCI config space info */ + + hw->vendor_id = pdev->vendor; + hw->device_id = pdev->device; + hw->subsystem_vendor_id = pdev->subsystem_vendor; + hw->subsystem_id = pdev->subsystem_device; + + hw->max_frame_size = netdev->mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH; + adapter->rx_buffer_len = hw->max_frame_size + 8; /* + 8 for errata */ + + if ((hw->device_id == IXGB_DEVICE_ID_82597EX) || + (hw->device_id == IXGB_DEVICE_ID_82597EX_CX4) || + (hw->device_id == IXGB_DEVICE_ID_82597EX_LR) || + (hw->device_id == IXGB_DEVICE_ID_82597EX_SR)) + hw->mac_type = ixgb_82597; + else { + /* should never have loaded on this device */ + netif_err(adapter, probe, adapter->netdev, "unsupported device id\n"); + } + + /* enable flow control to be programmed */ + hw->fc.send_xon = 1; + + set_bit(__IXGB_DOWN, &adapter->flags); + return 0; +} + +/** + * ixgb_open - Called when a network interface is made active + * @netdev: network interface device structure + * + * Returns 0 on success, negative value on failure + * + * The open entry point is called when a network interface is made + * active by the system (IFF_UP). At this point all resources needed + * for transmit and receive operations are allocated, the interrupt + * handler is registered with the OS, the watchdog timer is started, + * and the stack is notified that the interface is ready. + **/ + +static int +ixgb_open(struct net_device *netdev) +{ + struct ixgb_adapter *adapter = netdev_priv(netdev); + int err; + + /* allocate transmit descriptors */ + err = ixgb_setup_tx_resources(adapter); + if (err) + goto err_setup_tx; + + netif_carrier_off(netdev); + + /* allocate receive descriptors */ + + err = ixgb_setup_rx_resources(adapter); + if (err) + goto err_setup_rx; + + err = ixgb_up(adapter); + if (err) + goto err_up; + + netif_start_queue(netdev); + + return 0; + +err_up: + ixgb_free_rx_resources(adapter); +err_setup_rx: + ixgb_free_tx_resources(adapter); +err_setup_tx: + ixgb_reset(adapter); + + return err; +} + +/** + * ixgb_close - Disables a network interface + * @netdev: network interface device structure + * + * Returns 0, this is not allowed to fail + * + * The close entry point is called when an interface is de-activated + * by the OS. The hardware is still under the drivers control, but + * needs to be disabled. A global MAC reset is issued to stop the + * hardware, and all transmit and receive resources are freed. + **/ + +static int +ixgb_close(struct net_device *netdev) +{ + struct ixgb_adapter *adapter = netdev_priv(netdev); + + ixgb_down(adapter, true); + + ixgb_free_tx_resources(adapter); + ixgb_free_rx_resources(adapter); + + return 0; +} + +/** + * ixgb_setup_tx_resources - allocate Tx resources (Descriptors) + * @adapter: board private structure + * + * Return 0 on success, negative on failure + **/ + +int +ixgb_setup_tx_resources(struct ixgb_adapter *adapter) +{ + struct ixgb_desc_ring *txdr = &adapter->tx_ring; + struct pci_dev *pdev = adapter->pdev; + int size; + + size = sizeof(struct ixgb_buffer) * txdr->count; + txdr->buffer_info = vzalloc(size); + if (!txdr->buffer_info) + return -ENOMEM; + + /* round up to nearest 4K */ + + txdr->size = txdr->count * sizeof(struct ixgb_tx_desc); + txdr->size = ALIGN(txdr->size, 4096); + + txdr->desc = dma_zalloc_coherent(&pdev->dev, txdr->size, &txdr->dma, + GFP_KERNEL); + if (!txdr->desc) { + vfree(txdr->buffer_info); + return -ENOMEM; + } + + txdr->next_to_use = 0; + txdr->next_to_clean = 0; + + return 0; +} + +/** + * ixgb_configure_tx - Configure 82597 Transmit Unit after Reset. + * @adapter: board private structure + * + * Configure the Tx unit of the MAC after a reset. + **/ + +static void +ixgb_configure_tx(struct ixgb_adapter *adapter) +{ + u64 tdba = adapter->tx_ring.dma; + u32 tdlen = adapter->tx_ring.count * sizeof(struct ixgb_tx_desc); + u32 tctl; + struct ixgb_hw *hw = &adapter->hw; + + /* Setup the Base and Length of the Tx Descriptor Ring + * tx_ring.dma can be either a 32 or 64 bit value + */ + + IXGB_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL)); + IXGB_WRITE_REG(hw, TDBAH, (tdba >> 32)); + + IXGB_WRITE_REG(hw, TDLEN, tdlen); + + /* Setup the HW Tx Head and Tail descriptor pointers */ + + IXGB_WRITE_REG(hw, TDH, 0); + IXGB_WRITE_REG(hw, TDT, 0); + + /* don't set up txdctl, it induces performance problems if configured + * incorrectly */ + /* Set the Tx Interrupt Delay register */ + + IXGB_WRITE_REG(hw, TIDV, adapter->tx_int_delay); + + /* Program the Transmit Control Register */ + + tctl = IXGB_TCTL_TCE | IXGB_TCTL_TXEN | IXGB_TCTL_TPDE; + IXGB_WRITE_REG(hw, TCTL, tctl); + + /* Setup Transmit Descriptor Settings for this adapter */ + adapter->tx_cmd_type = + IXGB_TX_DESC_TYPE | + (adapter->tx_int_delay_enable ? IXGB_TX_DESC_CMD_IDE : 0); +} + +/** + * ixgb_setup_rx_resources - allocate Rx resources (Descriptors) + * @adapter: board private structure + * + * Returns 0 on success, negative on failure + **/ + +int +ixgb_setup_rx_resources(struct ixgb_adapter *adapter) +{ + struct ixgb_desc_ring *rxdr = &adapter->rx_ring; + struct pci_dev *pdev = adapter->pdev; + int size; + + size = sizeof(struct ixgb_buffer) * rxdr->count; + rxdr->buffer_info = vzalloc(size); + if (!rxdr->buffer_info) + return -ENOMEM; + + /* Round up to nearest 4K */ + + rxdr->size = rxdr->count * sizeof(struct ixgb_rx_desc); + rxdr->size = ALIGN(rxdr->size, 4096); + + rxdr->desc = dma_alloc_coherent(&pdev->dev, rxdr->size, &rxdr->dma, + GFP_KERNEL); + + if (!rxdr->desc) { + vfree(rxdr->buffer_info); + return -ENOMEM; + } + memset(rxdr->desc, 0, rxdr->size); + + rxdr->next_to_clean = 0; + rxdr->next_to_use = 0; + + return 0; +} + +/** + * ixgb_setup_rctl - configure the receive control register + * @adapter: Board private structure + **/ + +static void +ixgb_setup_rctl(struct ixgb_adapter *adapter) +{ + u32 rctl; + + rctl = IXGB_READ_REG(&adapter->hw, RCTL); + + rctl &= ~(3 << IXGB_RCTL_MO_SHIFT); + + rctl |= + IXGB_RCTL_BAM | IXGB_RCTL_RDMTS_1_2 | + IXGB_RCTL_RXEN | IXGB_RCTL_CFF | + (adapter->hw.mc_filter_type << IXGB_RCTL_MO_SHIFT); + + rctl |= IXGB_RCTL_SECRC; + + if (adapter->rx_buffer_len <= IXGB_RXBUFFER_2048) + rctl |= IXGB_RCTL_BSIZE_2048; + else if (adapter->rx_buffer_len <= IXGB_RXBUFFER_4096) + rctl |= IXGB_RCTL_BSIZE_4096; + else if (adapter->rx_buffer_len <= IXGB_RXBUFFER_8192) + rctl |= IXGB_RCTL_BSIZE_8192; + else if (adapter->rx_buffer_len <= IXGB_RXBUFFER_16384) + rctl |= IXGB_RCTL_BSIZE_16384; + + IXGB_WRITE_REG(&adapter->hw, RCTL, rctl); +} + +/** + * ixgb_configure_rx - Configure 82597 Receive Unit after Reset. + * @adapter: board private structure + * + * Configure the Rx unit of the MAC after a reset. + **/ + +static void +ixgb_configure_rx(struct ixgb_adapter *adapter) +{ + u64 rdba = adapter->rx_ring.dma; + u32 rdlen = adapter->rx_ring.count * sizeof(struct ixgb_rx_desc); + struct ixgb_hw *hw = &adapter->hw; + u32 rctl; + u32 rxcsum; + + /* make sure receives are disabled while setting up the descriptors */ + + rctl = IXGB_READ_REG(hw, RCTL); + IXGB_WRITE_REG(hw, RCTL, rctl & ~IXGB_RCTL_RXEN); + + /* set the Receive Delay Timer Register */ + + IXGB_WRITE_REG(hw, RDTR, adapter->rx_int_delay); + + /* Setup the Base and Length of the Rx Descriptor Ring */ + + IXGB_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL)); + IXGB_WRITE_REG(hw, RDBAH, (rdba >> 32)); + + IXGB_WRITE_REG(hw, RDLEN, rdlen); + + /* Setup the HW Rx Head and Tail Descriptor Pointers */ + IXGB_WRITE_REG(hw, RDH, 0); + IXGB_WRITE_REG(hw, RDT, 0); + + /* due to the hardware errata with RXDCTL, we are unable to use any of + * the performance enhancing features of it without causing other + * subtle bugs, some of the bugs could include receive length + * corruption at high data rates (WTHRESH > 0) and/or receive + * descriptor ring irregularites (particularly in hardware cache) */ + IXGB_WRITE_REG(hw, RXDCTL, 0); + + /* Enable Receive Checksum Offload for TCP and UDP */ + if (adapter->rx_csum) { + rxcsum = IXGB_READ_REG(hw, RXCSUM); + rxcsum |= IXGB_RXCSUM_TUOFL; + IXGB_WRITE_REG(hw, RXCSUM, rxcsum); + } + + /* Enable Receives */ + + IXGB_WRITE_REG(hw, RCTL, rctl); +} + +/** + * ixgb_free_tx_resources - Free Tx Resources + * @adapter: board private structure + * + * Free all transmit software resources + **/ + +void +ixgb_free_tx_resources(struct ixgb_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + + ixgb_clean_tx_ring(adapter); + + vfree(adapter->tx_ring.buffer_info); + adapter->tx_ring.buffer_info = NULL; + + dma_free_coherent(&pdev->dev, adapter->tx_ring.size, + adapter->tx_ring.desc, adapter->tx_ring.dma); + + adapter->tx_ring.desc = NULL; +} + +static void +ixgb_unmap_and_free_tx_resource(struct ixgb_adapter *adapter, + struct ixgb_buffer *buffer_info) +{ + if (buffer_info->dma) { + if (buffer_info->mapped_as_page) + dma_unmap_page(&adapter->pdev->dev, buffer_info->dma, + buffer_info->length, DMA_TO_DEVICE); + else + dma_unmap_single(&adapter->pdev->dev, buffer_info->dma, + buffer_info->length, DMA_TO_DEVICE); + buffer_info->dma = 0; + } + + if (buffer_info->skb) { + dev_kfree_skb_any(buffer_info->skb); + buffer_info->skb = NULL; + } + buffer_info->time_stamp = 0; + /* these fields must always be initialized in tx + * buffer_info->length = 0; + * buffer_info->next_to_watch = 0; */ +} + +/** + * ixgb_clean_tx_ring - Free Tx Buffers + * @adapter: board private structure + **/ + +static void +ixgb_clean_tx_ring(struct ixgb_adapter *adapter) +{ + struct ixgb_desc_ring *tx_ring = &adapter->tx_ring; + struct ixgb_buffer *buffer_info; + unsigned long size; + unsigned int i; + + /* Free all the Tx ring sk_buffs */ + + for (i = 0; i < tx_ring->count; i++) { + buffer_info = &tx_ring->buffer_info[i]; + ixgb_unmap_and_free_tx_resource(adapter, buffer_info); + } + + size = sizeof(struct ixgb_buffer) * tx_ring->count; + memset(tx_ring->buffer_info, 0, size); + + /* Zero out the descriptor ring */ + + memset(tx_ring->desc, 0, tx_ring->size); + + tx_ring->next_to_use = 0; + tx_ring->next_to_clean = 0; + + IXGB_WRITE_REG(&adapter->hw, TDH, 0); + IXGB_WRITE_REG(&adapter->hw, TDT, 0); +} + +/** + * ixgb_free_rx_resources - Free Rx Resources + * @adapter: board private structure + * + * Free all receive software resources + **/ + +void +ixgb_free_rx_resources(struct ixgb_adapter *adapter) +{ + struct ixgb_desc_ring *rx_ring = &adapter->rx_ring; + struct pci_dev *pdev = adapter->pdev; + + ixgb_clean_rx_ring(adapter); + + vfree(rx_ring->buffer_info); + rx_ring->buffer_info = NULL; + + dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc, + rx_ring->dma); + + rx_ring->desc = NULL; +} + +/** + * ixgb_clean_rx_ring - Free Rx Buffers + * @adapter: board private structure + **/ + +static void +ixgb_clean_rx_ring(struct ixgb_adapter *adapter) +{ + struct ixgb_desc_ring *rx_ring = &adapter->rx_ring; + struct ixgb_buffer *buffer_info; + struct pci_dev *pdev = adapter->pdev; + unsigned long size; + unsigned int i; + + /* Free all the Rx ring sk_buffs */ + + for (i = 0; i < rx_ring->count; i++) { + buffer_info = &rx_ring->buffer_info[i]; + if (buffer_info->dma) { + dma_unmap_single(&pdev->dev, + buffer_info->dma, + buffer_info->length, + DMA_FROM_DEVICE); + buffer_info->dma = 0; + buffer_info->length = 0; + } + + if (buffer_info->skb) { + dev_kfree_skb(buffer_info->skb); + buffer_info->skb = NULL; + } + } + + size = sizeof(struct ixgb_buffer) * rx_ring->count; + memset(rx_ring->buffer_info, 0, size); + + /* Zero out the descriptor ring */ + + memset(rx_ring->desc, 0, rx_ring->size); + + rx_ring->next_to_clean = 0; + rx_ring->next_to_use = 0; + + IXGB_WRITE_REG(&adapter->hw, RDH, 0); + IXGB_WRITE_REG(&adapter->hw, RDT, 0); +} + +/** + * ixgb_set_mac - Change the Ethernet Address of the NIC + * @netdev: network interface device structure + * @p: pointer to an address structure + * + * Returns 0 on success, negative on failure + **/ + +static int +ixgb_set_mac(struct net_device *netdev, void *p) +{ + struct ixgb_adapter *adapter = netdev_priv(netdev); + struct sockaddr *addr = p; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); + + ixgb_rar_set(&adapter->hw, addr->sa_data, 0); + + return 0; +} + +/** + * ixgb_set_multi - Multicast and Promiscuous mode set + * @netdev: network interface device structure + * + * The set_multi entry point is called whenever the multicast address + * list or the network interface flags are updated. This routine is + * responsible for configuring the hardware for proper multicast, + * promiscuous mode, and all-multi behavior. + **/ + +static void +ixgb_set_multi(struct net_device *netdev) +{ + struct ixgb_adapter *adapter = netdev_priv(netdev); + struct ixgb_hw *hw = &adapter->hw; + struct netdev_hw_addr *ha; + u32 rctl; + + /* Check for Promiscuous and All Multicast modes */ + + rctl = IXGB_READ_REG(hw, RCTL); + + if (netdev->flags & IFF_PROMISC) { + rctl |= (IXGB_RCTL_UPE | IXGB_RCTL_MPE); + /* disable VLAN filtering */ + rctl &= ~IXGB_RCTL_CFIEN; + rctl &= ~IXGB_RCTL_VFE; + } else { + if (netdev->flags & IFF_ALLMULTI) { + rctl |= IXGB_RCTL_MPE; + rctl &= ~IXGB_RCTL_UPE; + } else { + rctl &= ~(IXGB_RCTL_UPE | IXGB_RCTL_MPE); + } + /* enable VLAN filtering */ + rctl |= IXGB_RCTL_VFE; + rctl &= ~IXGB_RCTL_CFIEN; + } + + if (netdev_mc_count(netdev) > IXGB_MAX_NUM_MULTICAST_ADDRESSES) { + rctl |= IXGB_RCTL_MPE; + IXGB_WRITE_REG(hw, RCTL, rctl); + } else { + u8 *mta = kmalloc(IXGB_MAX_NUM_MULTICAST_ADDRESSES * + ETH_ALEN, GFP_ATOMIC); + u8 *addr; + if (!mta) + goto alloc_failed; + + IXGB_WRITE_REG(hw, RCTL, rctl); + + addr = mta; + netdev_for_each_mc_addr(ha, netdev) { + memcpy(addr, ha->addr, ETH_ALEN); + addr += ETH_ALEN; + } + + ixgb_mc_addr_list_update(hw, mta, netdev_mc_count(netdev), 0); + kfree(mta); + } + +alloc_failed: + if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX) + ixgb_vlan_strip_enable(adapter); + else + ixgb_vlan_strip_disable(adapter); + +} + +/** + * ixgb_watchdog - Timer Call-back + * @data: pointer to netdev cast into an unsigned long + **/ + +static void +ixgb_watchdog(unsigned long data) +{ + struct ixgb_adapter *adapter = (struct ixgb_adapter *)data; + struct net_device *netdev = adapter->netdev; + struct ixgb_desc_ring *txdr = &adapter->tx_ring; + + ixgb_check_for_link(&adapter->hw); + + if (ixgb_check_for_bad_link(&adapter->hw)) { + /* force the reset path */ + netif_stop_queue(netdev); + } + + if (adapter->hw.link_up) { + if (!netif_carrier_ok(netdev)) { + netdev_info(netdev, + "NIC Link is Up 10 Gbps Full Duplex, Flow Control: %s\n", + (adapter->hw.fc.type == ixgb_fc_full) ? + "RX/TX" : + (adapter->hw.fc.type == ixgb_fc_rx_pause) ? + "RX" : + (adapter->hw.fc.type == ixgb_fc_tx_pause) ? + "TX" : "None"); + adapter->link_speed = 10000; + adapter->link_duplex = FULL_DUPLEX; + netif_carrier_on(netdev); + } + } else { + if (netif_carrier_ok(netdev)) { + adapter->link_speed = 0; + adapter->link_duplex = 0; + netdev_info(netdev, "NIC Link is Down\n"); + netif_carrier_off(netdev); + } + } + + ixgb_update_stats(adapter); + + if (!netif_carrier_ok(netdev)) { + if (IXGB_DESC_UNUSED(txdr) + 1 < txdr->count) { + /* We've lost link, so the controller stops DMA, + * but we've got queued Tx work that's never going + * to get done, so reset controller to flush Tx. + * (Do the reset outside of interrupt context). */ + schedule_work(&adapter->tx_timeout_task); + /* return immediately since reset is imminent */ + return; + } + } + + /* Force detection of hung controller every watchdog period */ + adapter->detect_tx_hung = true; + + /* generate an interrupt to force clean up of any stragglers */ + IXGB_WRITE_REG(&adapter->hw, ICS, IXGB_INT_TXDW); + + /* Reset the timer */ + mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ); +} + +#define IXGB_TX_FLAGS_CSUM 0x00000001 +#define IXGB_TX_FLAGS_VLAN 0x00000002 +#define IXGB_TX_FLAGS_TSO 0x00000004 + +static int +ixgb_tso(struct ixgb_adapter *adapter, struct sk_buff *skb) +{ + struct ixgb_context_desc *context_desc; + unsigned int i; + u8 ipcss, ipcso, tucss, tucso, hdr_len; + u16 ipcse, tucse, mss; + + if (likely(skb_is_gso(skb))) { + struct ixgb_buffer *buffer_info; + struct iphdr *iph; + int err; + + err = skb_cow_head(skb, 0); + if (err < 0) + return err; + + hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); + mss = skb_shinfo(skb)->gso_size; + iph = ip_hdr(skb); + iph->tot_len = 0; + iph->check = 0; + tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, + iph->daddr, 0, + IPPROTO_TCP, 0); + ipcss = skb_network_offset(skb); + ipcso = (void *)&(iph->check) - (void *)skb->data; + ipcse = skb_transport_offset(skb) - 1; + tucss = skb_transport_offset(skb); + tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data; + tucse = 0; + + i = adapter->tx_ring.next_to_use; + context_desc = IXGB_CONTEXT_DESC(adapter->tx_ring, i); + buffer_info = &adapter->tx_ring.buffer_info[i]; + WARN_ON(buffer_info->dma != 0); + + context_desc->ipcss = ipcss; + context_desc->ipcso = ipcso; + context_desc->ipcse = cpu_to_le16(ipcse); + context_desc->tucss = tucss; + context_desc->tucso = tucso; + context_desc->tucse = cpu_to_le16(tucse); + context_desc->mss = cpu_to_le16(mss); + context_desc->hdr_len = hdr_len; + context_desc->status = 0; + context_desc->cmd_type_len = cpu_to_le32( + IXGB_CONTEXT_DESC_TYPE + | IXGB_CONTEXT_DESC_CMD_TSE + | IXGB_CONTEXT_DESC_CMD_IP + | IXGB_CONTEXT_DESC_CMD_TCP + | IXGB_CONTEXT_DESC_CMD_IDE + | (skb->len - (hdr_len))); + + + if (++i == adapter->tx_ring.count) i = 0; + adapter->tx_ring.next_to_use = i; + + return 1; + } + + return 0; +} + +static bool +ixgb_tx_csum(struct ixgb_adapter *adapter, struct sk_buff *skb) +{ + struct ixgb_context_desc *context_desc; + unsigned int i; + u8 css, cso; + + if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) { + struct ixgb_buffer *buffer_info; + css = skb_checksum_start_offset(skb); + cso = css + skb->csum_offset; + + i = adapter->tx_ring.next_to_use; + context_desc = IXGB_CONTEXT_DESC(adapter->tx_ring, i); + buffer_info = &adapter->tx_ring.buffer_info[i]; + WARN_ON(buffer_info->dma != 0); + + context_desc->tucss = css; + context_desc->tucso = cso; + context_desc->tucse = 0; + /* zero out any previously existing data in one instruction */ + *(u32 *)&(context_desc->ipcss) = 0; + context_desc->status = 0; + context_desc->hdr_len = 0; + context_desc->mss = 0; + context_desc->cmd_type_len = + cpu_to_le32(IXGB_CONTEXT_DESC_TYPE + | IXGB_TX_DESC_CMD_IDE); + + if (++i == adapter->tx_ring.count) i = 0; + adapter->tx_ring.next_to_use = i; + + return true; + } + + return false; +} + +#define IXGB_MAX_TXD_PWR 14 +#define IXGB_MAX_DATA_PER_TXD (1<<IXGB_MAX_TXD_PWR) + +static int +ixgb_tx_map(struct ixgb_adapter *adapter, struct sk_buff *skb, + unsigned int first) +{ + struct ixgb_desc_ring *tx_ring = &adapter->tx_ring; + struct pci_dev *pdev = adapter->pdev; + struct ixgb_buffer *buffer_info; + int len = skb_headlen(skb); + unsigned int offset = 0, size, count = 0, i; + unsigned int mss = skb_shinfo(skb)->gso_size; + unsigned int nr_frags = skb_shinfo(skb)->nr_frags; + unsigned int f; + + i = tx_ring->next_to_use; + + while (len) { + buffer_info = &tx_ring->buffer_info[i]; + size = min(len, IXGB_MAX_DATA_PER_TXD); + /* Workaround for premature desc write-backs + * in TSO mode. Append 4-byte sentinel desc */ + if (unlikely(mss && !nr_frags && size == len && size > 8)) + size -= 4; + + buffer_info->length = size; + WARN_ON(buffer_info->dma != 0); + buffer_info->time_stamp = jiffies; + buffer_info->mapped_as_page = false; + buffer_info->dma = dma_map_single(&pdev->dev, + skb->data + offset, + size, DMA_TO_DEVICE); + if (dma_mapping_error(&pdev->dev, buffer_info->dma)) + goto dma_error; + buffer_info->next_to_watch = 0; + + len -= size; + offset += size; + count++; + if (len) { + i++; + if (i == tx_ring->count) + i = 0; + } + } + + for (f = 0; f < nr_frags; f++) { + const struct skb_frag_struct *frag; + + frag = &skb_shinfo(skb)->frags[f]; + len = skb_frag_size(frag); + offset = 0; + + while (len) { + i++; + if (i == tx_ring->count) + i = 0; + + buffer_info = &tx_ring->buffer_info[i]; + size = min(len, IXGB_MAX_DATA_PER_TXD); + + /* Workaround for premature desc write-backs + * in TSO mode. Append 4-byte sentinel desc */ + if (unlikely(mss && (f == (nr_frags - 1)) + && size == len && size > 8)) + size -= 4; + + buffer_info->length = size; + buffer_info->time_stamp = jiffies; + buffer_info->mapped_as_page = true; + buffer_info->dma = + skb_frag_dma_map(&pdev->dev, frag, offset, size, + DMA_TO_DEVICE); + if (dma_mapping_error(&pdev->dev, buffer_info->dma)) + goto dma_error; + buffer_info->next_to_watch = 0; + + len -= size; + offset += size; + count++; + } + } + tx_ring->buffer_info[i].skb = skb; + tx_ring->buffer_info[first].next_to_watch = i; + + return count; + +dma_error: + dev_err(&pdev->dev, "TX DMA map failed\n"); + buffer_info->dma = 0; + if (count) + count--; + + while (count--) { + if (i==0) + i += tx_ring->count; + i--; + buffer_info = &tx_ring->buffer_info[i]; + ixgb_unmap_and_free_tx_resource(adapter, buffer_info); + } + + return 0; +} + +static void +ixgb_tx_queue(struct ixgb_adapter *adapter, int count, int vlan_id,int tx_flags) +{ + struct ixgb_desc_ring *tx_ring = &adapter->tx_ring; + struct ixgb_tx_desc *tx_desc = NULL; + struct ixgb_buffer *buffer_info; + u32 cmd_type_len = adapter->tx_cmd_type; + u8 status = 0; + u8 popts = 0; + unsigned int i; + + if (tx_flags & IXGB_TX_FLAGS_TSO) { + cmd_type_len |= IXGB_TX_DESC_CMD_TSE; + popts |= (IXGB_TX_DESC_POPTS_IXSM | IXGB_TX_DESC_POPTS_TXSM); + } + + if (tx_flags & IXGB_TX_FLAGS_CSUM) + popts |= IXGB_TX_DESC_POPTS_TXSM; + + if (tx_flags & IXGB_TX_FLAGS_VLAN) + cmd_type_len |= IXGB_TX_DESC_CMD_VLE; + + i = tx_ring->next_to_use; + + while (count--) { + buffer_info = &tx_ring->buffer_info[i]; + tx_desc = IXGB_TX_DESC(*tx_ring, i); + tx_desc->buff_addr = cpu_to_le64(buffer_info->dma); + tx_desc->cmd_type_len = + cpu_to_le32(cmd_type_len | buffer_info->length); + tx_desc->status = status; + tx_desc->popts = popts; + tx_desc->vlan = cpu_to_le16(vlan_id); + + if (++i == tx_ring->count) i = 0; + } + + tx_desc->cmd_type_len |= + cpu_to_le32(IXGB_TX_DESC_CMD_EOP | IXGB_TX_DESC_CMD_RS); + + /* Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. (Only + * applicable for weak-ordered memory model archs, + * such as IA-64). */ + wmb(); + + tx_ring->next_to_use = i; + IXGB_WRITE_REG(&adapter->hw, TDT, i); +} + +static int __ixgb_maybe_stop_tx(struct net_device *netdev, int size) +{ + struct ixgb_adapter *adapter = netdev_priv(netdev); + struct ixgb_desc_ring *tx_ring = &adapter->tx_ring; + + netif_stop_queue(netdev); + /* Herbert's original patch had: + * smp_mb__after_netif_stop_queue(); + * but since that doesn't exist yet, just open code it. */ + smp_mb(); + + /* We need to check again in a case another CPU has just + * made room available. */ + if (likely(IXGB_DESC_UNUSED(tx_ring) < size)) + return -EBUSY; + + /* A reprieve! */ + netif_start_queue(netdev); + ++adapter->restart_queue; + return 0; +} + +static int ixgb_maybe_stop_tx(struct net_device *netdev, + struct ixgb_desc_ring *tx_ring, int size) +{ + if (likely(IXGB_DESC_UNUSED(tx_ring) >= size)) + return 0; + return __ixgb_maybe_stop_tx(netdev, size); +} + + +/* Tx Descriptors needed, worst case */ +#define TXD_USE_COUNT(S) (((S) >> IXGB_MAX_TXD_PWR) + \ + (((S) & (IXGB_MAX_DATA_PER_TXD - 1)) ? 1 : 0)) +#define DESC_NEEDED TXD_USE_COUNT(IXGB_MAX_DATA_PER_TXD) /* skb->date */ + \ + MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE) + 1 /* for context */ \ + + 1 /* one more needed for sentinel TSO workaround */ + +static netdev_tx_t +ixgb_xmit_frame(struct sk_buff *skb, struct net_device *netdev) +{ + struct ixgb_adapter *adapter = netdev_priv(netdev); + unsigned int first; + unsigned int tx_flags = 0; + int vlan_id = 0; + int count = 0; + int tso; + + if (test_bit(__IXGB_DOWN, &adapter->flags)) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + if (skb->len <= 0) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + if (unlikely(ixgb_maybe_stop_tx(netdev, &adapter->tx_ring, + DESC_NEEDED))) + return NETDEV_TX_BUSY; + + if (vlan_tx_tag_present(skb)) { + tx_flags |= IXGB_TX_FLAGS_VLAN; + vlan_id = vlan_tx_tag_get(skb); + } + + first = adapter->tx_ring.next_to_use; + + tso = ixgb_tso(adapter, skb); + if (tso < 0) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + if (likely(tso)) + tx_flags |= IXGB_TX_FLAGS_TSO; + else if (ixgb_tx_csum(adapter, skb)) + tx_flags |= IXGB_TX_FLAGS_CSUM; + + count = ixgb_tx_map(adapter, skb, first); + + if (count) { + ixgb_tx_queue(adapter, count, vlan_id, tx_flags); + /* Make sure there is space in the ring for the next send. */ + ixgb_maybe_stop_tx(netdev, &adapter->tx_ring, DESC_NEEDED); + + } else { + dev_kfree_skb_any(skb); + adapter->tx_ring.buffer_info[first].time_stamp = 0; + adapter->tx_ring.next_to_use = first; + } + + return NETDEV_TX_OK; +} + +/** + * ixgb_tx_timeout - Respond to a Tx Hang + * @netdev: network interface device structure + **/ + +static void +ixgb_tx_timeout(struct net_device *netdev) +{ + struct ixgb_adapter *adapter = netdev_priv(netdev); + + /* Do the reset outside of interrupt context */ + schedule_work(&adapter->tx_timeout_task); +} + +static void +ixgb_tx_timeout_task(struct work_struct *work) +{ + struct ixgb_adapter *adapter = + container_of(work, struct ixgb_adapter, tx_timeout_task); + + adapter->tx_timeout_count++; + ixgb_down(adapter, true); + ixgb_up(adapter); +} + +/** + * ixgb_get_stats - Get System Network Statistics + * @netdev: network interface device structure + * + * Returns the address of the device statistics structure. + * The statistics are actually updated from the timer callback. + **/ + +static struct net_device_stats * +ixgb_get_stats(struct net_device *netdev) +{ + return &netdev->stats; +} + +/** + * ixgb_change_mtu - Change the Maximum Transfer Unit + * @netdev: network interface device structure + * @new_mtu: new value for maximum frame size + * + * Returns 0 on success, negative on failure + **/ + +static int +ixgb_change_mtu(struct net_device *netdev, int new_mtu) +{ + struct ixgb_adapter *adapter = netdev_priv(netdev); + int max_frame = new_mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH; + int old_max_frame = netdev->mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH; + + /* MTU < 68 is an error for IPv4 traffic, just don't allow it */ + if ((new_mtu < 68) || + (max_frame > IXGB_MAX_JUMBO_FRAME_SIZE + ENET_FCS_LENGTH)) { + netif_err(adapter, probe, adapter->netdev, + "Invalid MTU setting %d\n", new_mtu); + return -EINVAL; + } + + if (old_max_frame == max_frame) + return 0; + + if (netif_running(netdev)) + ixgb_down(adapter, true); + + adapter->rx_buffer_len = max_frame + 8; /* + 8 for errata */ + + netdev->mtu = new_mtu; + + if (netif_running(netdev)) + ixgb_up(adapter); + + return 0; +} + +/** + * ixgb_update_stats - Update the board statistics counters. + * @adapter: board private structure + **/ + +void +ixgb_update_stats(struct ixgb_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + + /* Prevent stats update while adapter is being reset */ + if (pci_channel_offline(pdev)) + return; + + if ((netdev->flags & IFF_PROMISC) || (netdev->flags & IFF_ALLMULTI) || + (netdev_mc_count(netdev) > IXGB_MAX_NUM_MULTICAST_ADDRESSES)) { + u64 multi = IXGB_READ_REG(&adapter->hw, MPRCL); + u32 bcast_l = IXGB_READ_REG(&adapter->hw, BPRCL); + u32 bcast_h = IXGB_READ_REG(&adapter->hw, BPRCH); + u64 bcast = ((u64)bcast_h << 32) | bcast_l; + + multi |= ((u64)IXGB_READ_REG(&adapter->hw, MPRCH) << 32); + /* fix up multicast stats by removing broadcasts */ + if (multi >= bcast) + multi -= bcast; + + adapter->stats.mprcl += (multi & 0xFFFFFFFF); + adapter->stats.mprch += (multi >> 32); + adapter->stats.bprcl += bcast_l; + adapter->stats.bprch += bcast_h; + } else { + adapter->stats.mprcl += IXGB_READ_REG(&adapter->hw, MPRCL); + adapter->stats.mprch += IXGB_READ_REG(&adapter->hw, MPRCH); + adapter->stats.bprcl += IXGB_READ_REG(&adapter->hw, BPRCL); + adapter->stats.bprch += IXGB_READ_REG(&adapter->hw, BPRCH); + } + adapter->stats.tprl += IXGB_READ_REG(&adapter->hw, TPRL); + adapter->stats.tprh += IXGB_READ_REG(&adapter->hw, TPRH); + adapter->stats.gprcl += IXGB_READ_REG(&adapter->hw, GPRCL); + adapter->stats.gprch += IXGB_READ_REG(&adapter->hw, GPRCH); + adapter->stats.uprcl += IXGB_READ_REG(&adapter->hw, UPRCL); + adapter->stats.uprch += IXGB_READ_REG(&adapter->hw, UPRCH); + adapter->stats.vprcl += IXGB_READ_REG(&adapter->hw, VPRCL); + adapter->stats.vprch += IXGB_READ_REG(&adapter->hw, VPRCH); + adapter->stats.jprcl += IXGB_READ_REG(&adapter->hw, JPRCL); + adapter->stats.jprch += IXGB_READ_REG(&adapter->hw, JPRCH); + adapter->stats.gorcl += IXGB_READ_REG(&adapter->hw, GORCL); + adapter->stats.gorch += IXGB_READ_REG(&adapter->hw, GORCH); + adapter->stats.torl += IXGB_READ_REG(&adapter->hw, TORL); + adapter->stats.torh += IXGB_READ_REG(&adapter->hw, TORH); + adapter->stats.rnbc += IXGB_READ_REG(&adapter->hw, RNBC); + adapter->stats.ruc += IXGB_READ_REG(&adapter->hw, RUC); + adapter->stats.roc += IXGB_READ_REG(&adapter->hw, ROC); + adapter->stats.rlec += IXGB_READ_REG(&adapter->hw, RLEC); + adapter->stats.crcerrs += IXGB_READ_REG(&adapter->hw, CRCERRS); + adapter->stats.icbc += IXGB_READ_REG(&adapter->hw, ICBC); + adapter->stats.ecbc += IXGB_READ_REG(&adapter->hw, ECBC); + adapter->stats.mpc += IXGB_READ_REG(&adapter->hw, MPC); + adapter->stats.tptl += IXGB_READ_REG(&adapter->hw, TPTL); + adapter->stats.tpth += IXGB_READ_REG(&adapter->hw, TPTH); + adapter->stats.gptcl += IXGB_READ_REG(&adapter->hw, GPTCL); + adapter->stats.gptch += IXGB_READ_REG(&adapter->hw, GPTCH); + adapter->stats.bptcl += IXGB_READ_REG(&adapter->hw, BPTCL); + adapter->stats.bptch += IXGB_READ_REG(&adapter->hw, BPTCH); + adapter->stats.mptcl += IXGB_READ_REG(&adapter->hw, MPTCL); + adapter->stats.mptch += IXGB_READ_REG(&adapter->hw, MPTCH); + adapter->stats.uptcl += IXGB_READ_REG(&adapter->hw, UPTCL); + adapter->stats.uptch += IXGB_READ_REG(&adapter->hw, UPTCH); + adapter->stats.vptcl += IXGB_READ_REG(&adapter->hw, VPTCL); + adapter->stats.vptch += IXGB_READ_REG(&adapter->hw, VPTCH); + adapter->stats.jptcl += IXGB_READ_REG(&adapter->hw, JPTCL); + adapter->stats.jptch += IXGB_READ_REG(&adapter->hw, JPTCH); + adapter->stats.gotcl += IXGB_READ_REG(&adapter->hw, GOTCL); + adapter->stats.gotch += IXGB_READ_REG(&adapter->hw, GOTCH); + adapter->stats.totl += IXGB_READ_REG(&adapter->hw, TOTL); + adapter->stats.toth += IXGB_READ_REG(&adapter->hw, TOTH); + adapter->stats.dc += IXGB_READ_REG(&adapter->hw, DC); + adapter->stats.plt64c += IXGB_READ_REG(&adapter->hw, PLT64C); + adapter->stats.tsctc += IXGB_READ_REG(&adapter->hw, TSCTC); + adapter->stats.tsctfc += IXGB_READ_REG(&adapter->hw, TSCTFC); + adapter->stats.ibic += IXGB_READ_REG(&adapter->hw, IBIC); + adapter->stats.rfc += IXGB_READ_REG(&adapter->hw, RFC); + adapter->stats.lfc += IXGB_READ_REG(&adapter->hw, LFC); + adapter->stats.pfrc += IXGB_READ_REG(&adapter->hw, PFRC); + adapter->stats.pftc += IXGB_READ_REG(&adapter->hw, PFTC); + adapter->stats.mcfrc += IXGB_READ_REG(&adapter->hw, MCFRC); + adapter->stats.mcftc += IXGB_READ_REG(&adapter->hw, MCFTC); + adapter->stats.xonrxc += IXGB_READ_REG(&adapter->hw, XONRXC); + adapter->stats.xontxc += IXGB_READ_REG(&adapter->hw, XONTXC); + adapter->stats.xoffrxc += IXGB_READ_REG(&adapter->hw, XOFFRXC); + adapter->stats.xofftxc += IXGB_READ_REG(&adapter->hw, XOFFTXC); + adapter->stats.rjc += IXGB_READ_REG(&adapter->hw, RJC); + + /* Fill out the OS statistics structure */ + + netdev->stats.rx_packets = adapter->stats.gprcl; + netdev->stats.tx_packets = adapter->stats.gptcl; + netdev->stats.rx_bytes = adapter->stats.gorcl; + netdev->stats.tx_bytes = adapter->stats.gotcl; + netdev->stats.multicast = adapter->stats.mprcl; + netdev->stats.collisions = 0; + + /* ignore RLEC as it reports errors for padded (<64bytes) frames + * with a length in the type/len field */ + netdev->stats.rx_errors = + /* adapter->stats.rnbc + */ adapter->stats.crcerrs + + adapter->stats.ruc + + adapter->stats.roc /*+ adapter->stats.rlec */ + + adapter->stats.icbc + + adapter->stats.ecbc + adapter->stats.mpc; + + /* see above + * netdev->stats.rx_length_errors = adapter->stats.rlec; + */ + + netdev->stats.rx_crc_errors = adapter->stats.crcerrs; + netdev->stats.rx_fifo_errors = adapter->stats.mpc; + netdev->stats.rx_missed_errors = adapter->stats.mpc; + netdev->stats.rx_over_errors = adapter->stats.mpc; + + netdev->stats.tx_errors = 0; + netdev->stats.rx_frame_errors = 0; + netdev->stats.tx_aborted_errors = 0; + netdev->stats.tx_carrier_errors = 0; + netdev->stats.tx_fifo_errors = 0; + netdev->stats.tx_heartbeat_errors = 0; + netdev->stats.tx_window_errors = 0; +} + +#define IXGB_MAX_INTR 10 +/** + * ixgb_intr - Interrupt Handler + * @irq: interrupt number + * @data: pointer to a network interface device structure + **/ + +static irqreturn_t +ixgb_intr(int irq, void *data) +{ + struct net_device *netdev = data; + struct ixgb_adapter *adapter = netdev_priv(netdev); + struct ixgb_hw *hw = &adapter->hw; + u32 icr = IXGB_READ_REG(hw, ICR); + + if (unlikely(!icr)) + return IRQ_NONE; /* Not our interrupt */ + + if (unlikely(icr & (IXGB_INT_RXSEQ | IXGB_INT_LSC))) + if (!test_bit(__IXGB_DOWN, &adapter->flags)) + mod_timer(&adapter->watchdog_timer, jiffies); + + if (napi_schedule_prep(&adapter->napi)) { + + /* Disable interrupts and register for poll. The flush + of the posted write is intentionally left out. + */ + + IXGB_WRITE_REG(&adapter->hw, IMC, ~0); + __napi_schedule(&adapter->napi); + } + return IRQ_HANDLED; +} + +/** + * ixgb_clean - NAPI Rx polling callback + * @adapter: board private structure + **/ + +static int +ixgb_clean(struct napi_struct *napi, int budget) +{ + struct ixgb_adapter *adapter = container_of(napi, struct ixgb_adapter, napi); + int work_done = 0; + + ixgb_clean_tx_irq(adapter); + ixgb_clean_rx_irq(adapter, &work_done, budget); + + /* If budget not fully consumed, exit the polling mode */ + if (work_done < budget) { + napi_complete(napi); + if (!test_bit(__IXGB_DOWN, &adapter->flags)) + ixgb_irq_enable(adapter); + } + + return work_done; +} + +/** + * ixgb_clean_tx_irq - Reclaim resources after transmit completes + * @adapter: board private structure + **/ + +static bool +ixgb_clean_tx_irq(struct ixgb_adapter *adapter) +{ + struct ixgb_desc_ring *tx_ring = &adapter->tx_ring; + struct net_device *netdev = adapter->netdev; + struct ixgb_tx_desc *tx_desc, *eop_desc; + struct ixgb_buffer *buffer_info; + unsigned int i, eop; + bool cleaned = false; + + i = tx_ring->next_to_clean; + eop = tx_ring->buffer_info[i].next_to_watch; + eop_desc = IXGB_TX_DESC(*tx_ring, eop); + + while (eop_desc->status & IXGB_TX_DESC_STATUS_DD) { + + rmb(); /* read buffer_info after eop_desc */ + for (cleaned = false; !cleaned; ) { + tx_desc = IXGB_TX_DESC(*tx_ring, i); + buffer_info = &tx_ring->buffer_info[i]; + + if (tx_desc->popts & + (IXGB_TX_DESC_POPTS_TXSM | + IXGB_TX_DESC_POPTS_IXSM)) + adapter->hw_csum_tx_good++; + + ixgb_unmap_and_free_tx_resource(adapter, buffer_info); + + *(u32 *)&(tx_desc->status) = 0; + + cleaned = (i == eop); + if (++i == tx_ring->count) i = 0; + } + + eop = tx_ring->buffer_info[i].next_to_watch; + eop_desc = IXGB_TX_DESC(*tx_ring, eop); + } + + tx_ring->next_to_clean = i; + + if (unlikely(cleaned && netif_carrier_ok(netdev) && + IXGB_DESC_UNUSED(tx_ring) >= DESC_NEEDED)) { + /* Make sure that anybody stopping the queue after this + * sees the new next_to_clean. */ + smp_mb(); + + if (netif_queue_stopped(netdev) && + !(test_bit(__IXGB_DOWN, &adapter->flags))) { + netif_wake_queue(netdev); + ++adapter->restart_queue; + } + } + + if (adapter->detect_tx_hung) { + /* detect a transmit hang in hardware, this serializes the + * check with the clearing of time_stamp and movement of i */ + adapter->detect_tx_hung = false; + if (tx_ring->buffer_info[eop].time_stamp && + time_after(jiffies, tx_ring->buffer_info[eop].time_stamp + HZ) + && !(IXGB_READ_REG(&adapter->hw, STATUS) & + IXGB_STATUS_TXOFF)) { + /* detected Tx unit hang */ + netif_err(adapter, drv, adapter->netdev, + "Detected Tx Unit Hang\n" + " TDH <%x>\n" + " TDT <%x>\n" + " next_to_use <%x>\n" + " next_to_clean <%x>\n" + "buffer_info[next_to_clean]\n" + " time_stamp <%lx>\n" + " next_to_watch <%x>\n" + " jiffies <%lx>\n" + " next_to_watch.status <%x>\n", + IXGB_READ_REG(&adapter->hw, TDH), + IXGB_READ_REG(&adapter->hw, TDT), + tx_ring->next_to_use, + tx_ring->next_to_clean, + tx_ring->buffer_info[eop].time_stamp, + eop, + jiffies, + eop_desc->status); + netif_stop_queue(netdev); + } + } + + return cleaned; +} + +/** + * ixgb_rx_checksum - Receive Checksum Offload for 82597. + * @adapter: board private structure + * @rx_desc: receive descriptor + * @sk_buff: socket buffer with received data + **/ + +static void +ixgb_rx_checksum(struct ixgb_adapter *adapter, + struct ixgb_rx_desc *rx_desc, + struct sk_buff *skb) +{ + /* Ignore Checksum bit is set OR + * TCP Checksum has not been calculated + */ + if ((rx_desc->status & IXGB_RX_DESC_STATUS_IXSM) || + (!(rx_desc->status & IXGB_RX_DESC_STATUS_TCPCS))) { + skb_checksum_none_assert(skb); + return; + } + + /* At this point we know the hardware did the TCP checksum */ + /* now look at the TCP checksum error bit */ + if (rx_desc->errors & IXGB_RX_DESC_ERRORS_TCPE) { + /* let the stack verify checksum errors */ + skb_checksum_none_assert(skb); + adapter->hw_csum_rx_error++; + } else { + /* TCP checksum is good */ + skb->ip_summed = CHECKSUM_UNNECESSARY; + adapter->hw_csum_rx_good++; + } +} + +/* + * this should improve performance for small packets with large amounts + * of reassembly being done in the stack + */ +static void ixgb_check_copybreak(struct net_device *netdev, + struct ixgb_buffer *buffer_info, + u32 length, struct sk_buff **skb) +{ + struct sk_buff *new_skb; + + if (length > copybreak) + return; + + new_skb = netdev_alloc_skb_ip_align(netdev, length); + if (!new_skb) + return; + + skb_copy_to_linear_data_offset(new_skb, -NET_IP_ALIGN, + (*skb)->data - NET_IP_ALIGN, + length + NET_IP_ALIGN); + /* save the skb in buffer_info as good */ + buffer_info->skb = *skb; + *skb = new_skb; +} + +/** + * ixgb_clean_rx_irq - Send received data up the network stack, + * @adapter: board private structure + **/ + +static bool +ixgb_clean_rx_irq(struct ixgb_adapter *adapter, int *work_done, int work_to_do) +{ + struct ixgb_desc_ring *rx_ring = &adapter->rx_ring; + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + struct ixgb_rx_desc *rx_desc, *next_rxd; + struct ixgb_buffer *buffer_info, *next_buffer, *next2_buffer; + u32 length; + unsigned int i, j; + int cleaned_count = 0; + bool cleaned = false; + + i = rx_ring->next_to_clean; + rx_desc = IXGB_RX_DESC(*rx_ring, i); + buffer_info = &rx_ring->buffer_info[i]; + + while (rx_desc->status & IXGB_RX_DESC_STATUS_DD) { + struct sk_buff *skb; + u8 status; + + if (*work_done >= work_to_do) + break; + + (*work_done)++; + rmb(); /* read descriptor and rx_buffer_info after status DD */ + status = rx_desc->status; + skb = buffer_info->skb; + buffer_info->skb = NULL; + + prefetch(skb->data - NET_IP_ALIGN); + + if (++i == rx_ring->count) + i = 0; + next_rxd = IXGB_RX_DESC(*rx_ring, i); + prefetch(next_rxd); + + j = i + 1; + if (j == rx_ring->count) + j = 0; + next2_buffer = &rx_ring->buffer_info[j]; + prefetch(next2_buffer); + + next_buffer = &rx_ring->buffer_info[i]; + + cleaned = true; + cleaned_count++; + + dma_unmap_single(&pdev->dev, + buffer_info->dma, + buffer_info->length, + DMA_FROM_DEVICE); + buffer_info->dma = 0; + + length = le16_to_cpu(rx_desc->length); + rx_desc->length = 0; + + if (unlikely(!(status & IXGB_RX_DESC_STATUS_EOP))) { + + /* All receives must fit into a single buffer */ + + pr_debug("Receive packet consumed multiple buffers length<%x>\n", + length); + + dev_kfree_skb_irq(skb); + goto rxdesc_done; + } + + if (unlikely(rx_desc->errors & + (IXGB_RX_DESC_ERRORS_CE | IXGB_RX_DESC_ERRORS_SE | + IXGB_RX_DESC_ERRORS_P | IXGB_RX_DESC_ERRORS_RXE))) { + dev_kfree_skb_irq(skb); + goto rxdesc_done; + } + + ixgb_check_copybreak(netdev, buffer_info, length, &skb); + + /* Good Receive */ + skb_put(skb, length); + + /* Receive Checksum Offload */ + ixgb_rx_checksum(adapter, rx_desc, skb); + + skb->protocol = eth_type_trans(skb, netdev); + if (status & IXGB_RX_DESC_STATUS_VP) + __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), + le16_to_cpu(rx_desc->special)); + + netif_receive_skb(skb); + +rxdesc_done: + /* clean up descriptor, might be written over by hw */ + rx_desc->status = 0; + + /* return some buffers to hardware, one at a time is too slow */ + if (unlikely(cleaned_count >= IXGB_RX_BUFFER_WRITE)) { + ixgb_alloc_rx_buffers(adapter, cleaned_count); + cleaned_count = 0; + } + + /* use prefetched values */ + rx_desc = next_rxd; + buffer_info = next_buffer; + } + + rx_ring->next_to_clean = i; + + cleaned_count = IXGB_DESC_UNUSED(rx_ring); + if (cleaned_count) + ixgb_alloc_rx_buffers(adapter, cleaned_count); + + return cleaned; +} + +/** + * ixgb_alloc_rx_buffers - Replace used receive buffers + * @adapter: address of board private structure + **/ + +static void +ixgb_alloc_rx_buffers(struct ixgb_adapter *adapter, int cleaned_count) +{ + struct ixgb_desc_ring *rx_ring = &adapter->rx_ring; + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + struct ixgb_rx_desc *rx_desc; + struct ixgb_buffer *buffer_info; + struct sk_buff *skb; + unsigned int i; + long cleancount; + + i = rx_ring->next_to_use; + buffer_info = &rx_ring->buffer_info[i]; + cleancount = IXGB_DESC_UNUSED(rx_ring); + + + /* leave three descriptors unused */ + while (--cleancount > 2 && cleaned_count--) { + /* recycle! its good for you */ + skb = buffer_info->skb; + if (skb) { + skb_trim(skb, 0); + goto map_skb; + } + + skb = netdev_alloc_skb_ip_align(netdev, adapter->rx_buffer_len); + if (unlikely(!skb)) { + /* Better luck next round */ + adapter->alloc_rx_buff_failed++; + break; + } + + buffer_info->skb = skb; + buffer_info->length = adapter->rx_buffer_len; +map_skb: + buffer_info->dma = dma_map_single(&pdev->dev, + skb->data, + adapter->rx_buffer_len, + DMA_FROM_DEVICE); + if (dma_mapping_error(&pdev->dev, buffer_info->dma)) { + adapter->alloc_rx_buff_failed++; + break; + } + + rx_desc = IXGB_RX_DESC(*rx_ring, i); + rx_desc->buff_addr = cpu_to_le64(buffer_info->dma); + /* guarantee DD bit not set now before h/w gets descriptor + * this is the rest of the workaround for h/w double + * writeback. */ + rx_desc->status = 0; + + + if (++i == rx_ring->count) + i = 0; + buffer_info = &rx_ring->buffer_info[i]; + } + + if (likely(rx_ring->next_to_use != i)) { + rx_ring->next_to_use = i; + if (unlikely(i-- == 0)) + i = (rx_ring->count - 1); + + /* Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. (Only + * applicable for weak-ordered memory model archs, such + * as IA-64). */ + wmb(); + IXGB_WRITE_REG(&adapter->hw, RDT, i); + } +} + +static void +ixgb_vlan_strip_enable(struct ixgb_adapter *adapter) +{ + u32 ctrl; + + /* enable VLAN tag insert/strip */ + ctrl = IXGB_READ_REG(&adapter->hw, CTRL0); + ctrl |= IXGB_CTRL0_VME; + IXGB_WRITE_REG(&adapter->hw, CTRL0, ctrl); +} + +static void +ixgb_vlan_strip_disable(struct ixgb_adapter *adapter) +{ + u32 ctrl; + + /* disable VLAN tag insert/strip */ + ctrl = IXGB_READ_REG(&adapter->hw, CTRL0); + ctrl &= ~IXGB_CTRL0_VME; + IXGB_WRITE_REG(&adapter->hw, CTRL0, ctrl); +} + +static int +ixgb_vlan_rx_add_vid(struct net_device *netdev, __be16 proto, u16 vid) +{ + struct ixgb_adapter *adapter = netdev_priv(netdev); + u32 vfta, index; + + /* add VID to filter table */ + + index = (vid >> 5) & 0x7F; + vfta = IXGB_READ_REG_ARRAY(&adapter->hw, VFTA, index); + vfta |= (1 << (vid & 0x1F)); + ixgb_write_vfta(&adapter->hw, index, vfta); + set_bit(vid, adapter->active_vlans); + + return 0; +} + +static int +ixgb_vlan_rx_kill_vid(struct net_device *netdev, __be16 proto, u16 vid) +{ + struct ixgb_adapter *adapter = netdev_priv(netdev); + u32 vfta, index; + + /* remove VID from filter table */ + + index = (vid >> 5) & 0x7F; + vfta = IXGB_READ_REG_ARRAY(&adapter->hw, VFTA, index); + vfta &= ~(1 << (vid & 0x1F)); + ixgb_write_vfta(&adapter->hw, index, vfta); + clear_bit(vid, adapter->active_vlans); + + return 0; +} + +static void +ixgb_restore_vlan(struct ixgb_adapter *adapter) +{ + u16 vid; + + for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID) + ixgb_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), vid); +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + * Polling 'interrupt' - used by things like netconsole to send skbs + * without having to re-enable interrupts. It's not called while + * the interrupt routine is executing. + */ + +static void ixgb_netpoll(struct net_device *dev) +{ + struct ixgb_adapter *adapter = netdev_priv(dev); + + disable_irq(adapter->pdev->irq); + ixgb_intr(adapter->pdev->irq, dev); + enable_irq(adapter->pdev->irq); +} +#endif + +/** + * ixgb_io_error_detected - called when PCI error is detected + * @pdev: pointer to pci device with error + * @state: pci channel state after error + * + * This callback is called by the PCI subsystem whenever + * a PCI bus error is detected. + */ +static pci_ers_result_t ixgb_io_error_detected(struct pci_dev *pdev, + enum pci_channel_state state) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct ixgb_adapter *adapter = netdev_priv(netdev); + + netif_device_detach(netdev); + + if (state == pci_channel_io_perm_failure) + return PCI_ERS_RESULT_DISCONNECT; + + if (netif_running(netdev)) + ixgb_down(adapter, true); + + pci_disable_device(pdev); + + /* Request a slot reset. */ + return PCI_ERS_RESULT_NEED_RESET; +} + +/** + * ixgb_io_slot_reset - called after the pci bus has been reset. + * @pdev pointer to pci device with error + * + * This callback is called after the PCI bus has been reset. + * Basically, this tries to restart the card from scratch. + * This is a shortened version of the device probe/discovery code, + * it resembles the first-half of the ixgb_probe() routine. + */ +static pci_ers_result_t ixgb_io_slot_reset(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct ixgb_adapter *adapter = netdev_priv(netdev); + + if (pci_enable_device(pdev)) { + netif_err(adapter, probe, adapter->netdev, + "Cannot re-enable PCI device after reset\n"); + return PCI_ERS_RESULT_DISCONNECT; + } + + /* Perform card reset only on one instance of the card */ + if (0 != PCI_FUNC (pdev->devfn)) + return PCI_ERS_RESULT_RECOVERED; + + pci_set_master(pdev); + + netif_carrier_off(netdev); + netif_stop_queue(netdev); + ixgb_reset(adapter); + + /* Make sure the EEPROM is good */ + if (!ixgb_validate_eeprom_checksum(&adapter->hw)) { + netif_err(adapter, probe, adapter->netdev, + "After reset, the EEPROM checksum is not valid\n"); + return PCI_ERS_RESULT_DISCONNECT; + } + ixgb_get_ee_mac_addr(&adapter->hw, netdev->dev_addr); + memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len); + + if (!is_valid_ether_addr(netdev->perm_addr)) { + netif_err(adapter, probe, adapter->netdev, + "After reset, invalid MAC address\n"); + return PCI_ERS_RESULT_DISCONNECT; + } + + return PCI_ERS_RESULT_RECOVERED; +} + +/** + * ixgb_io_resume - called when its OK to resume normal operations + * @pdev pointer to pci device with error + * + * The error recovery driver tells us that its OK to resume + * normal operation. Implementation resembles the second-half + * of the ixgb_probe() routine. + */ +static void ixgb_io_resume(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct ixgb_adapter *adapter = netdev_priv(netdev); + + pci_set_master(pdev); + + if (netif_running(netdev)) { + if (ixgb_up(adapter)) { + pr_err("can't bring device back up after reset\n"); + return; + } + } + + netif_device_attach(netdev); + mod_timer(&adapter->watchdog_timer, jiffies); +} + +/* ixgb_main.c */ diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_osdep.h b/drivers/net/ethernet/intel/ixgb/ixgb_osdep.h new file mode 100644 index 00000000000..8fc90519223 --- /dev/null +++ b/drivers/net/ethernet/intel/ixgb/ixgb_osdep.h @@ -0,0 +1,64 @@ +/******************************************************************************* + + Intel PRO/10GbE Linux driver + Copyright(c) 1999 - 2008 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +/* glue for the OS independent part of ixgb + * includes register access macros + */ + +#ifndef _IXGB_OSDEP_H_ +#define _IXGB_OSDEP_H_ + +#include <linux/types.h> +#include <linux/delay.h> +#include <asm/io.h> +#include <linux/interrupt.h> +#include <linux/sched.h> +#include <linux/if_ether.h> + +#undef ASSERT +#define ASSERT(x) BUG_ON(!(x)) + +#define ENTER() pr_debug("%s\n", __func__); + +#define IXGB_WRITE_REG(a, reg, value) ( \ + writel((value), ((a)->hw_addr + IXGB_##reg))) + +#define IXGB_READ_REG(a, reg) ( \ + readl((a)->hw_addr + IXGB_##reg)) + +#define IXGB_WRITE_REG_ARRAY(a, reg, offset, value) ( \ + writel((value), ((a)->hw_addr + IXGB_##reg + ((offset) << 2)))) + +#define IXGB_READ_REG_ARRAY(a, reg, offset) ( \ + readl((a)->hw_addr + IXGB_##reg + ((offset) << 2))) + +#define IXGB_WRITE_FLUSH(a) IXGB_READ_REG(a, STATUS) + +#define IXGB_MEMCPY memcpy + +#endif /* _IXGB_OSDEP_H_ */ diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_param.c b/drivers/net/ethernet/intel/ixgb/ixgb_param.c new file mode 100644 index 00000000000..04a60640ddd --- /dev/null +++ b/drivers/net/ethernet/intel/ixgb/ixgb_param.c @@ -0,0 +1,469 @@ +/******************************************************************************* + + Intel PRO/10GbE Linux driver + Copyright(c) 1999 - 2008 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "ixgb.h" + +/* This is the only thing that needs to be changed to adjust the + * maximum number of ports that the driver can manage. + */ + +#define IXGB_MAX_NIC 8 + +#define OPTION_UNSET -1 +#define OPTION_DISABLED 0 +#define OPTION_ENABLED 1 + +/* All parameters are treated the same, as an integer array of values. + * This macro just reduces the need to repeat the same declaration code + * over and over (plus this helps to avoid typo bugs). + */ + +#define IXGB_PARAM_INIT { [0 ... IXGB_MAX_NIC] = OPTION_UNSET } +#define IXGB_PARAM(X, desc) \ + static int X[IXGB_MAX_NIC+1] \ + = IXGB_PARAM_INIT; \ + static unsigned int num_##X = 0; \ + module_param_array_named(X, X, int, &num_##X, 0); \ + MODULE_PARM_DESC(X, desc); + +/* Transmit Descriptor Count + * + * Valid Range: 64-4096 + * + * Default Value: 256 + */ + +IXGB_PARAM(TxDescriptors, "Number of transmit descriptors"); + +/* Receive Descriptor Count + * + * Valid Range: 64-4096 + * + * Default Value: 1024 + */ + +IXGB_PARAM(RxDescriptors, "Number of receive descriptors"); + +/* User Specified Flow Control Override + * + * Valid Range: 0-3 + * - 0 - No Flow Control + * - 1 - Rx only, respond to PAUSE frames but do not generate them + * - 2 - Tx only, generate PAUSE frames but ignore them on receive + * - 3 - Full Flow Control Support + * + * Default Value: 2 - Tx only (silicon bug avoidance) + */ + +IXGB_PARAM(FlowControl, "Flow Control setting"); + +/* XsumRX - Receive Checksum Offload Enable/Disable + * + * Valid Range: 0, 1 + * - 0 - disables all checksum offload + * - 1 - enables receive IP/TCP/UDP checksum offload + * on 82597 based NICs + * + * Default Value: 1 + */ + +IXGB_PARAM(XsumRX, "Disable or enable Receive Checksum offload"); + +/* Transmit Interrupt Delay in units of 0.8192 microseconds + * + * Valid Range: 0-65535 + * + * Default Value: 32 + */ + +IXGB_PARAM(TxIntDelay, "Transmit Interrupt Delay"); + +/* Receive Interrupt Delay in units of 0.8192 microseconds + * + * Valid Range: 0-65535 + * + * Default Value: 72 + */ + +IXGB_PARAM(RxIntDelay, "Receive Interrupt Delay"); + +/* Receive Flow control high threshold (when we send a pause frame) + * (FCRTH) + * + * Valid Range: 1,536 - 262,136 (0x600 - 0x3FFF8, 8 byte granularity) + * + * Default Value: 196,608 (0x30000) + */ + +IXGB_PARAM(RxFCHighThresh, "Receive Flow Control High Threshold"); + +/* Receive Flow control low threshold (when we send a resume frame) + * (FCRTL) + * + * Valid Range: 64 - 262,136 (0x40 - 0x3FFF8, 8 byte granularity) + * must be less than high threshold by at least 8 bytes + * + * Default Value: 163,840 (0x28000) + */ + +IXGB_PARAM(RxFCLowThresh, "Receive Flow Control Low Threshold"); + +/* Flow control request timeout (how long to pause the link partner's tx) + * (PAP 15:0) + * + * Valid Range: 1 - 65535 + * + * Default Value: 65535 (0xffff) (we'll send an xon if we recover) + */ + +IXGB_PARAM(FCReqTimeout, "Flow Control Request Timeout"); + +/* Interrupt Delay Enable + * + * Valid Range: 0, 1 + * + * - 0 - disables transmit interrupt delay + * - 1 - enables transmmit interrupt delay + * + * Default Value: 1 + */ + +IXGB_PARAM(IntDelayEnable, "Transmit Interrupt Delay Enable"); + + +#define DEFAULT_TIDV 32 +#define MAX_TIDV 0xFFFF +#define MIN_TIDV 0 + +#define DEFAULT_RDTR 72 +#define MAX_RDTR 0xFFFF +#define MIN_RDTR 0 + +#define XSUMRX_DEFAULT OPTION_ENABLED + +#define DEFAULT_FCRTL 0x28000 +#define DEFAULT_FCRTH 0x30000 +#define MIN_FCRTL 0 +#define MAX_FCRTL 0x3FFE8 +#define MIN_FCRTH 8 +#define MAX_FCRTH 0x3FFF0 + +#define MIN_FCPAUSE 1 +#define MAX_FCPAUSE 0xffff +#define DEFAULT_FCPAUSE 0xFFFF /* this may be too long */ + +struct ixgb_option { + enum { enable_option, range_option, list_option } type; + const char *name; + const char *err; + int def; + union { + struct { /* range_option info */ + int min; + int max; + } r; + struct { /* list_option info */ + int nr; + const struct ixgb_opt_list { + int i; + const char *str; + } *p; + } l; + } arg; +}; + +static int +ixgb_validate_option(unsigned int *value, const struct ixgb_option *opt) +{ + if (*value == OPTION_UNSET) { + *value = opt->def; + return 0; + } + + switch (opt->type) { + case enable_option: + switch (*value) { + case OPTION_ENABLED: + pr_info("%s Enabled\n", opt->name); + return 0; + case OPTION_DISABLED: + pr_info("%s Disabled\n", opt->name); + return 0; + } + break; + case range_option: + if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) { + pr_info("%s set to %i\n", opt->name, *value); + return 0; + } + break; + case list_option: { + int i; + const struct ixgb_opt_list *ent; + + for (i = 0; i < opt->arg.l.nr; i++) { + ent = &opt->arg.l.p[i]; + if (*value == ent->i) { + if (ent->str[0] != '\0') + pr_info("%s\n", ent->str); + return 0; + } + } + } + break; + default: + BUG(); + } + + pr_info("Invalid %s specified (%i) %s\n", opt->name, *value, opt->err); + *value = opt->def; + return -1; +} + +/** + * ixgb_check_options - Range Checking for Command Line Parameters + * @adapter: board private structure + * + * This routine checks all command line parameters for valid user + * input. If an invalid value is given, or if no user specified + * value exists, a default value is used. The final value is stored + * in a variable in the adapter structure. + **/ + +void +ixgb_check_options(struct ixgb_adapter *adapter) +{ + int bd = adapter->bd_number; + if (bd >= IXGB_MAX_NIC) { + pr_notice("Warning: no configuration for board #%i\n", bd); + pr_notice("Using defaults for all values\n"); + } + + { /* Transmit Descriptor Count */ + static const struct ixgb_option opt = { + .type = range_option, + .name = "Transmit Descriptors", + .err = "using default of " __MODULE_STRING(DEFAULT_TXD), + .def = DEFAULT_TXD, + .arg = { .r = { .min = MIN_TXD, + .max = MAX_TXD}} + }; + struct ixgb_desc_ring *tx_ring = &adapter->tx_ring; + + if (num_TxDescriptors > bd) { + tx_ring->count = TxDescriptors[bd]; + ixgb_validate_option(&tx_ring->count, &opt); + } else { + tx_ring->count = opt.def; + } + tx_ring->count = ALIGN(tx_ring->count, IXGB_REQ_TX_DESCRIPTOR_MULTIPLE); + } + { /* Receive Descriptor Count */ + static const struct ixgb_option opt = { + .type = range_option, + .name = "Receive Descriptors", + .err = "using default of " __MODULE_STRING(DEFAULT_RXD), + .def = DEFAULT_RXD, + .arg = { .r = { .min = MIN_RXD, + .max = MAX_RXD}} + }; + struct ixgb_desc_ring *rx_ring = &adapter->rx_ring; + + if (num_RxDescriptors > bd) { + rx_ring->count = RxDescriptors[bd]; + ixgb_validate_option(&rx_ring->count, &opt); + } else { + rx_ring->count = opt.def; + } + rx_ring->count = ALIGN(rx_ring->count, IXGB_REQ_RX_DESCRIPTOR_MULTIPLE); + } + { /* Receive Checksum Offload Enable */ + static const struct ixgb_option opt = { + .type = enable_option, + .name = "Receive Checksum Offload", + .err = "defaulting to Enabled", + .def = OPTION_ENABLED + }; + + if (num_XsumRX > bd) { + unsigned int rx_csum = XsumRX[bd]; + ixgb_validate_option(&rx_csum, &opt); + adapter->rx_csum = rx_csum; + } else { + adapter->rx_csum = opt.def; + } + } + { /* Flow Control */ + + static const struct ixgb_opt_list fc_list[] = { + { ixgb_fc_none, "Flow Control Disabled" }, + { ixgb_fc_rx_pause, "Flow Control Receive Only" }, + { ixgb_fc_tx_pause, "Flow Control Transmit Only" }, + { ixgb_fc_full, "Flow Control Enabled" }, + { ixgb_fc_default, "Flow Control Hardware Default" } + }; + + static const struct ixgb_option opt = { + .type = list_option, + .name = "Flow Control", + .err = "reading default settings from EEPROM", + .def = ixgb_fc_tx_pause, + .arg = { .l = { .nr = ARRAY_SIZE(fc_list), + .p = fc_list }} + }; + + if (num_FlowControl > bd) { + unsigned int fc = FlowControl[bd]; + ixgb_validate_option(&fc, &opt); + adapter->hw.fc.type = fc; + } else { + adapter->hw.fc.type = opt.def; + } + } + { /* Receive Flow Control High Threshold */ + static const struct ixgb_option opt = { + .type = range_option, + .name = "Rx Flow Control High Threshold", + .err = "using default of " __MODULE_STRING(DEFAULT_FCRTH), + .def = DEFAULT_FCRTH, + .arg = { .r = { .min = MIN_FCRTH, + .max = MAX_FCRTH}} + }; + + if (num_RxFCHighThresh > bd) { + adapter->hw.fc.high_water = RxFCHighThresh[bd]; + ixgb_validate_option(&adapter->hw.fc.high_water, &opt); + } else { + adapter->hw.fc.high_water = opt.def; + } + if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) ) + pr_info("Ignoring RxFCHighThresh when no RxFC\n"); + } + { /* Receive Flow Control Low Threshold */ + static const struct ixgb_option opt = { + .type = range_option, + .name = "Rx Flow Control Low Threshold", + .err = "using default of " __MODULE_STRING(DEFAULT_FCRTL), + .def = DEFAULT_FCRTL, + .arg = { .r = { .min = MIN_FCRTL, + .max = MAX_FCRTL}} + }; + + if (num_RxFCLowThresh > bd) { + adapter->hw.fc.low_water = RxFCLowThresh[bd]; + ixgb_validate_option(&adapter->hw.fc.low_water, &opt); + } else { + adapter->hw.fc.low_water = opt.def; + } + if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) ) + pr_info("Ignoring RxFCLowThresh when no RxFC\n"); + } + { /* Flow Control Pause Time Request*/ + static const struct ixgb_option opt = { + .type = range_option, + .name = "Flow Control Pause Time Request", + .err = "using default of "__MODULE_STRING(DEFAULT_FCPAUSE), + .def = DEFAULT_FCPAUSE, + .arg = { .r = { .min = MIN_FCPAUSE, + .max = MAX_FCPAUSE}} + }; + + if (num_FCReqTimeout > bd) { + unsigned int pause_time = FCReqTimeout[bd]; + ixgb_validate_option(&pause_time, &opt); + adapter->hw.fc.pause_time = pause_time; + } else { + adapter->hw.fc.pause_time = opt.def; + } + if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) ) + pr_info("Ignoring FCReqTimeout when no RxFC\n"); + } + /* high low and spacing check for rx flow control thresholds */ + if (adapter->hw.fc.type & ixgb_fc_tx_pause) { + /* high must be greater than low */ + if (adapter->hw.fc.high_water < (adapter->hw.fc.low_water + 8)) { + /* set defaults */ + pr_info("RxFCHighThresh must be >= (RxFCLowThresh + 8), Using Defaults\n"); + adapter->hw.fc.high_water = DEFAULT_FCRTH; + adapter->hw.fc.low_water = DEFAULT_FCRTL; + } + } + { /* Receive Interrupt Delay */ + static const struct ixgb_option opt = { + .type = range_option, + .name = "Receive Interrupt Delay", + .err = "using default of " __MODULE_STRING(DEFAULT_RDTR), + .def = DEFAULT_RDTR, + .arg = { .r = { .min = MIN_RDTR, + .max = MAX_RDTR}} + }; + + if (num_RxIntDelay > bd) { + adapter->rx_int_delay = RxIntDelay[bd]; + ixgb_validate_option(&adapter->rx_int_delay, &opt); + } else { + adapter->rx_int_delay = opt.def; + } + } + { /* Transmit Interrupt Delay */ + static const struct ixgb_option opt = { + .type = range_option, + .name = "Transmit Interrupt Delay", + .err = "using default of " __MODULE_STRING(DEFAULT_TIDV), + .def = DEFAULT_TIDV, + .arg = { .r = { .min = MIN_TIDV, + .max = MAX_TIDV}} + }; + + if (num_TxIntDelay > bd) { + adapter->tx_int_delay = TxIntDelay[bd]; + ixgb_validate_option(&adapter->tx_int_delay, &opt); + } else { + adapter->tx_int_delay = opt.def; + } + } + + { /* Transmit Interrupt Delay Enable */ + static const struct ixgb_option opt = { + .type = enable_option, + .name = "Tx Interrupt Delay Enable", + .err = "defaulting to Enabled", + .def = OPTION_ENABLED + }; + + if (num_IntDelayEnable > bd) { + unsigned int ide = IntDelayEnable[bd]; + ixgb_validate_option(&ide, &opt); + adapter->tx_int_delay_enable = ide; + } else { + adapter->tx_int_delay_enable = opt.def; + } + } +} |