diff options
Diffstat (limited to 'drivers/net/ethernet/intel/igb/e1000_defines.h')
| -rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_defines.h | 189 |
1 files changed, 122 insertions, 67 deletions
diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h index 0571b973be8..217f8138851 100644 --- a/drivers/net/ethernet/intel/igb/e1000_defines.h +++ b/drivers/net/ethernet/intel/igb/e1000_defines.h @@ -1,29 +1,25 @@ -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +/* Intel(R) Gigabit Ethernet Linux driver + * Copyright(c) 2007-2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, see <http://www.gnu.org/licenses/>. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ #ifndef _E1000_DEFINES_H_ #define _E1000_DEFINES_H_ @@ -44,16 +40,21 @@ #define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ /* Extended Device Control */ +#define E1000_CTRL_EXT_SDP2_DATA 0x00000040 /* Value of SW Defineable Pin 2 */ #define E1000_CTRL_EXT_SDP3_DATA 0x00000080 /* Value of SW Defineable Pin 3 */ +#define E1000_CTRL_EXT_SDP2_DIR 0x00000400 /* SDP2 Data direction */ +#define E1000_CTRL_EXT_SDP3_DIR 0x00000800 /* SDP3 Data direction */ + /* Physical Func Reset Done Indication */ -#define E1000_CTRL_EXT_PFRSTD 0x00004000 -#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 -#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000 -#define E1000_CTRL_EXT_LINK_MODE_1000BASE_KX 0x00400000 -#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000 -#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000 -#define E1000_CTRL_EXT_EIAME 0x01000000 -#define E1000_CTRL_EXT_IRCA 0x00000001 +#define E1000_CTRL_EXT_PFRSTD 0x00004000 +#define E1000_CTRL_EXT_SDLPE 0X00040000 /* SerDes Low Power Enable */ +#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 +#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000 +#define E1000_CTRL_EXT_LINK_MODE_1000BASE_KX 0x00400000 +#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000 +#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000 +#define E1000_CTRL_EXT_EIAME 0x01000000 +#define E1000_CTRL_EXT_IRCA 0x00000001 /* Interrupt delay cancellation */ /* Driver loaded bit for FW */ #define E1000_CTRL_EXT_DRV_LOAD 0x10000000 @@ -62,6 +63,7 @@ /* packet buffer parity error detection enabled */ /* descriptor FIFO parity error detection enable */ #define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */ +#define E1000_CTRL_EXT_PHYPDEN 0x00100000 #define E1000_I2CCMD_REG_ADDR_SHIFT 16 #define E1000_I2CCMD_PHY_ADDR_SHIFT 24 #define E1000_I2CCMD_OPCODE_READ 0x08000000 @@ -98,11 +100,11 @@ /* Same mask, but for extended and packet split descriptors */ #define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \ - E1000_RXDEXT_STATERR_CE | \ - E1000_RXDEXT_STATERR_SE | \ - E1000_RXDEXT_STATERR_SEQ | \ - E1000_RXDEXT_STATERR_CXE | \ - E1000_RXDEXT_STATERR_RXE) + E1000_RXDEXT_STATERR_CE | \ + E1000_RXDEXT_STATERR_SE | \ + E1000_RXDEXT_STATERR_SEQ | \ + E1000_RXDEXT_STATERR_CXE | \ + E1000_RXDEXT_STATERR_RXE) #define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000 #define E1000_MRQC_RSS_FIELD_IPV4 0x00020000 @@ -191,7 +193,8 @@ /* enable link status from external LINK_0 and LINK_1 pins */ #define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */ #define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */ -#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */ +#define E1000_CTRL_SDP0_DIR 0x00400000 /* SDP0 Data direction */ +#define E1000_CTRL_SDP1_DIR 0x00800000 /* SDP1 Data direction */ #define E1000_CTRL_RST 0x04000000 /* Global reset */ #define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */ #define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */ @@ -303,39 +306,34 @@ #define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */ /* DMA Coalescing register fields */ -#define E1000_DMACR_DMACWT_MASK 0x00003FFF /* DMA Coalescing - * Watchdog Timer */ -#define E1000_DMACR_DMACTHR_MASK 0x00FF0000 /* DMA Coalescing Receive - * Threshold */ +#define E1000_DMACR_DMACWT_MASK 0x00003FFF /* DMA Coal Watchdog Timer */ +#define E1000_DMACR_DMACTHR_MASK 0x00FF0000 /* DMA Coal Rx Threshold */ #define E1000_DMACR_DMACTHR_SHIFT 16 -#define E1000_DMACR_DMAC_LX_MASK 0x30000000 /* Lx when no PCIe - * transactions */ +#define E1000_DMACR_DMAC_LX_MASK 0x30000000 /* Lx when no PCIe trans */ #define E1000_DMACR_DMAC_LX_SHIFT 28 #define E1000_DMACR_DMAC_EN 0x80000000 /* Enable DMA Coalescing */ /* DMA Coalescing BMC-to-OS Watchdog Enable */ #define E1000_DMACR_DC_BMC2OSW_EN 0x00008000 -#define E1000_DMCTXTH_DMCTTHR_MASK 0x00000FFF /* DMA Coalescing Transmit - * Threshold */ +#define E1000_DMCTXTH_DMCTTHR_MASK 0x00000FFF /* DMA Coal Tx Threshold */ #define E1000_DMCTLX_TTLX_MASK 0x00000FFF /* Time to LX request */ -#define E1000_DMCRTRH_UTRESH_MASK 0x0007FFFF /* Receive Traffic Rate - * Threshold */ -#define E1000_DMCRTRH_LRPRCW 0x80000000 /* Rcv packet rate in - * current window */ +#define E1000_DMCRTRH_UTRESH_MASK 0x0007FFFF /* Rx Traffic Rate Thresh */ +#define E1000_DMCRTRH_LRPRCW 0x80000000 /* Rx pkt rate curr window */ -#define E1000_DMCCNT_CCOUNT_MASK 0x01FFFFFF /* DMA Coal Rcv Traffic - * Current Cnt */ +#define E1000_DMCCNT_CCOUNT_MASK 0x01FFFFFF /* DMA Coal Rx Current Cnt */ -#define E1000_FCRTC_RTH_COAL_MASK 0x0003FFF0 /* Flow ctrl Rcv Threshold - * High val */ +#define E1000_FCRTC_RTH_COAL_MASK 0x0003FFF0 /* FC Rx Thresh High val */ #define E1000_FCRTC_RTH_COAL_SHIFT 4 #define E1000_PCIEMISC_LX_DECISION 0x00000080 /* Lx power decision */ /* Timestamp in Rx buffer */ #define E1000_RXPBS_CFG_TS_EN 0x80000000 +#define I210_RXPBSIZE_DEFAULT 0x000000A2 /* RXPBSIZE default */ +#define I210_TXPBSIZE_DEFAULT 0x04000014 /* TXPBSIZE default */ + /* SerDes Control */ #define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400 @@ -402,12 +400,12 @@ * o LSC = Link Status Change */ #define IMS_ENABLE_MASK ( \ - E1000_IMS_RXT0 | \ - E1000_IMS_TXDW | \ - E1000_IMS_RXDMT0 | \ - E1000_IMS_RXSEQ | \ - E1000_IMS_LSC | \ - E1000_IMS_DOUTSYNC) + E1000_IMS_RXT0 | \ + E1000_IMS_TXDW | \ + E1000_IMS_RXDMT0 | \ + E1000_IMS_RXSEQ | \ + E1000_IMS_LSC | \ + E1000_IMS_DOUTSYNC) /* Interrupt Mask Set */ #define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ @@ -463,7 +461,6 @@ #define E1000_RAH_POOL_1 0x00040000 /* Error Codes */ -#define E1000_SUCCESS 0 #define E1000_ERR_NVM 1 #define E1000_ERR_PHY 2 #define E1000_ERR_CONFIG 3 @@ -529,8 +526,67 @@ #define E1000_TIMINCA_16NS_SHIFT 24 -#define E1000_TSICR_TXTS 0x00000002 -#define E1000_TSIM_TXTS 0x00000002 +/* Time Sync Interrupt Cause/Mask Register Bits */ + +#define TSINTR_SYS_WRAP (1 << 0) /* SYSTIM Wrap around. */ +#define TSINTR_TXTS (1 << 1) /* Transmit Timestamp. */ +#define TSINTR_RXTS (1 << 2) /* Receive Timestamp. */ +#define TSINTR_TT0 (1 << 3) /* Target Time 0 Trigger. */ +#define TSINTR_TT1 (1 << 4) /* Target Time 1 Trigger. */ +#define TSINTR_AUTT0 (1 << 5) /* Auxiliary Timestamp 0 Taken. */ +#define TSINTR_AUTT1 (1 << 6) /* Auxiliary Timestamp 1 Taken. */ +#define TSINTR_TADJ (1 << 7) /* Time Adjust Done. */ + +#define TSYNC_INTERRUPTS TSINTR_TXTS +#define E1000_TSICR_TXTS TSINTR_TXTS + +/* TSAUXC Configuration Bits */ +#define TSAUXC_EN_TT0 (1 << 0) /* Enable target time 0. */ +#define TSAUXC_EN_TT1 (1 << 1) /* Enable target time 1. */ +#define TSAUXC_EN_CLK0 (1 << 2) /* Enable Configurable Frequency Clock 0. */ +#define TSAUXC_SAMP_AUT0 (1 << 3) /* Latch SYSTIML/H into AUXSTMPL/0. */ +#define TSAUXC_ST0 (1 << 4) /* Start Clock 0 Toggle on Target Time 0. */ +#define TSAUXC_EN_CLK1 (1 << 5) /* Enable Configurable Frequency Clock 1. */ +#define TSAUXC_SAMP_AUT1 (1 << 6) /* Latch SYSTIML/H into AUXSTMPL/1. */ +#define TSAUXC_ST1 (1 << 7) /* Start Clock 1 Toggle on Target Time 1. */ +#define TSAUXC_EN_TS0 (1 << 8) /* Enable hardware timestamp 0. */ +#define TSAUXC_AUTT0 (1 << 9) /* Auxiliary Timestamp Taken. */ +#define TSAUXC_EN_TS1 (1 << 10) /* Enable hardware timestamp 0. */ +#define TSAUXC_AUTT1 (1 << 11) /* Auxiliary Timestamp Taken. */ +#define TSAUXC_PLSG (1 << 17) /* Generate a pulse. */ +#define TSAUXC_DISABLE (1 << 31) /* Disable SYSTIM Count Operation. */ + +/* SDP Configuration Bits */ +#define AUX0_SEL_SDP0 (0 << 0) /* Assign SDP0 to auxiliary time stamp 0. */ +#define AUX0_SEL_SDP1 (1 << 0) /* Assign SDP1 to auxiliary time stamp 0. */ +#define AUX0_SEL_SDP2 (2 << 0) /* Assign SDP2 to auxiliary time stamp 0. */ +#define AUX0_SEL_SDP3 (3 << 0) /* Assign SDP3 to auxiliary time stamp 0. */ +#define AUX0_TS_SDP_EN (1 << 2) /* Enable auxiliary time stamp trigger 0. */ +#define AUX1_SEL_SDP0 (0 << 3) /* Assign SDP0 to auxiliary time stamp 1. */ +#define AUX1_SEL_SDP1 (1 << 3) /* Assign SDP1 to auxiliary time stamp 1. */ +#define AUX1_SEL_SDP2 (2 << 3) /* Assign SDP2 to auxiliary time stamp 1. */ +#define AUX1_SEL_SDP3 (3 << 3) /* Assign SDP3 to auxiliary time stamp 1. */ +#define AUX1_TS_SDP_EN (1 << 5) /* Enable auxiliary time stamp trigger 1. */ +#define TS_SDP0_SEL_TT0 (0 << 6) /* Target time 0 is output on SDP0. */ +#define TS_SDP0_SEL_TT1 (1 << 6) /* Target time 1 is output on SDP0. */ +#define TS_SDP0_SEL_FC0 (2 << 6) /* Freq clock 0 is output on SDP0. */ +#define TS_SDP0_SEL_FC1 (3 << 6) /* Freq clock 1 is output on SDP0. */ +#define TS_SDP0_EN (1 << 8) /* SDP0 is assigned to Tsync. */ +#define TS_SDP1_SEL_TT0 (0 << 9) /* Target time 0 is output on SDP1. */ +#define TS_SDP1_SEL_TT1 (1 << 9) /* Target time 1 is output on SDP1. */ +#define TS_SDP1_SEL_FC0 (2 << 9) /* Freq clock 0 is output on SDP1. */ +#define TS_SDP1_SEL_FC1 (3 << 9) /* Freq clock 1 is output on SDP1. */ +#define TS_SDP1_EN (1 << 11) /* SDP1 is assigned to Tsync. */ +#define TS_SDP2_SEL_TT0 (0 << 12) /* Target time 0 is output on SDP2. */ +#define TS_SDP2_SEL_TT1 (1 << 12) /* Target time 1 is output on SDP2. */ +#define TS_SDP2_SEL_FC0 (2 << 12) /* Freq clock 0 is output on SDP2. */ +#define TS_SDP2_SEL_FC1 (3 << 12) /* Freq clock 1 is output on SDP2. */ +#define TS_SDP2_EN (1 << 14) /* SDP2 is assigned to Tsync. */ +#define TS_SDP3_SEL_TT0 (0 << 15) /* Target time 0 is output on SDP3. */ +#define TS_SDP3_SEL_TT1 (1 << 15) /* Target time 1 is output on SDP3. */ +#define TS_SDP3_SEL_FC0 (2 << 15) /* Freq clock 0 is output on SDP3. */ +#define TS_SDP3_SEL_FC1 (3 << 15) /* Freq clock 1 is output on SDP3. */ +#define TS_SDP3_EN (1 << 17) /* SDP3 is assigned to Tsync. */ #define E1000_MDICNFG_EXT_MDIO 0x80000000 /* MDI ext/int destination */ #define E1000_MDICNFG_COM_MDIO 0x40000000 /* MDI shared w/ lan 0 */ @@ -948,8 +1004,7 @@ #define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F /* DMA Coalescing register fields */ -#define E1000_PCIEMISC_LX_DECISION 0x00000080 /* Lx power decision based - on DMA coal */ +#define E1000_PCIEMISC_LX_DECISION 0x00000080 /* Lx power on DMA coal */ /* Tx Rate-Scheduler Config fields */ #define E1000_RTTBCNRC_RS_ENA 0x80000000 |