diff options
Diffstat (limited to 'drivers/net/ethernet/intel/igb/e1000_defines.h')
| -rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_defines.h | 380 |
1 files changed, 279 insertions, 101 deletions
diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h index aed217449f0..217f8138851 100644 --- a/drivers/net/ethernet/intel/igb/e1000_defines.h +++ b/drivers/net/ethernet/intel/igb/e1000_defines.h @@ -1,29 +1,25 @@ -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +/* Intel(R) Gigabit Ethernet Linux driver + * Copyright(c) 2007-2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, see <http://www.gnu.org/licenses/>. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ #ifndef _E1000_DEFINES_H_ #define _E1000_DEFINES_H_ @@ -44,16 +40,21 @@ #define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ /* Extended Device Control */ +#define E1000_CTRL_EXT_SDP2_DATA 0x00000040 /* Value of SW Defineable Pin 2 */ #define E1000_CTRL_EXT_SDP3_DATA 0x00000080 /* Value of SW Defineable Pin 3 */ +#define E1000_CTRL_EXT_SDP2_DIR 0x00000400 /* SDP2 Data direction */ +#define E1000_CTRL_EXT_SDP3_DIR 0x00000800 /* SDP3 Data direction */ + /* Physical Func Reset Done Indication */ -#define E1000_CTRL_EXT_PFRSTD 0x00004000 -#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 -#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000 -#define E1000_CTRL_EXT_LINK_MODE_1000BASE_KX 0x00400000 -#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000 -#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000 -#define E1000_CTRL_EXT_EIAME 0x01000000 -#define E1000_CTRL_EXT_IRCA 0x00000001 +#define E1000_CTRL_EXT_PFRSTD 0x00004000 +#define E1000_CTRL_EXT_SDLPE 0X00040000 /* SerDes Low Power Enable */ +#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 +#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000 +#define E1000_CTRL_EXT_LINK_MODE_1000BASE_KX 0x00400000 +#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000 +#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000 +#define E1000_CTRL_EXT_EIAME 0x01000000 +#define E1000_CTRL_EXT_IRCA 0x00000001 /* Interrupt delay cancellation */ /* Driver loaded bit for FW */ #define E1000_CTRL_EXT_DRV_LOAD 0x10000000 @@ -61,20 +62,23 @@ /* Clear Interrupt timers after IMS clear */ /* packet buffer parity error detection enabled */ /* descriptor FIFO parity error detection enable */ -#define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */ -#define E1000_I2CCMD_REG_ADDR_SHIFT 16 -#define E1000_I2CCMD_PHY_ADDR_SHIFT 24 -#define E1000_I2CCMD_OPCODE_READ 0x08000000 -#define E1000_I2CCMD_OPCODE_WRITE 0x00000000 -#define E1000_I2CCMD_READY 0x20000000 -#define E1000_I2CCMD_ERROR 0x80000000 -#define E1000_MAX_SGMII_PHY_REG_ADDR 255 -#define E1000_I2CCMD_PHY_TIMEOUT 200 -#define E1000_IVAR_VALID 0x80 -#define E1000_GPIE_NSICR 0x00000001 -#define E1000_GPIE_MSIX_MODE 0x00000010 -#define E1000_GPIE_EIAME 0x40000000 -#define E1000_GPIE_PBA 0x80000000 +#define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */ +#define E1000_CTRL_EXT_PHYPDEN 0x00100000 +#define E1000_I2CCMD_REG_ADDR_SHIFT 16 +#define E1000_I2CCMD_PHY_ADDR_SHIFT 24 +#define E1000_I2CCMD_OPCODE_READ 0x08000000 +#define E1000_I2CCMD_OPCODE_WRITE 0x00000000 +#define E1000_I2CCMD_READY 0x20000000 +#define E1000_I2CCMD_ERROR 0x80000000 +#define E1000_I2CCMD_SFP_DATA_ADDR(a) (0x0000 + (a)) +#define E1000_I2CCMD_SFP_DIAG_ADDR(a) (0x0100 + (a)) +#define E1000_MAX_SGMII_PHY_REG_ADDR 255 +#define E1000_I2CCMD_PHY_TIMEOUT 200 +#define E1000_IVAR_VALID 0x80 +#define E1000_GPIE_NSICR 0x00000001 +#define E1000_GPIE_MSIX_MODE 0x00000010 +#define E1000_GPIE_EIAME 0x40000000 +#define E1000_GPIE_PBA 0x80000000 /* Receive Descriptor bit definitions */ #define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */ @@ -96,11 +100,11 @@ /* Same mask, but for extended and packet split descriptors */ #define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \ - E1000_RXDEXT_STATERR_CE | \ - E1000_RXDEXT_STATERR_SE | \ - E1000_RXDEXT_STATERR_SEQ | \ - E1000_RXDEXT_STATERR_CXE | \ - E1000_RXDEXT_STATERR_RXE) + E1000_RXDEXT_STATERR_CE | \ + E1000_RXDEXT_STATERR_SE | \ + E1000_RXDEXT_STATERR_SEQ | \ + E1000_RXDEXT_STATERR_CXE | \ + E1000_RXDEXT_STATERR_RXE) #define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000 #define E1000_MRQC_RSS_FIELD_IPV4 0x00020000 @@ -134,10 +138,11 @@ #define E1000_RCTL_SZ_256 0x00030000 /* rx buffer size 256 */ #define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */ #define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */ +#define E1000_RCTL_DPF 0x00400000 /* Discard Pause Frames */ +#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */ #define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */ -/* - * Use byte values for the following shift parameters +/* Use byte values for the following shift parameters * Usage: * psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) & * E1000_PSRCTL_BSIZE0_MASK) | @@ -188,7 +193,8 @@ /* enable link status from external LINK_0 and LINK_1 pins */ #define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */ #define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */ -#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */ +#define E1000_CTRL_SDP0_DIR 0x00400000 /* SDP0 Data direction */ +#define E1000_CTRL_SDP1_DIR 0x00800000 /* SDP1 Data direction */ #define E1000_CTRL_RST 0x04000000 /* Global reset */ #define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */ #define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */ @@ -202,6 +208,11 @@ */ #define E1000_CONNSW_ENRGSRC 0x4 +#define E1000_CONNSW_PHYSD 0x400 +#define E1000_CONNSW_PHY_PDN 0x800 +#define E1000_CONNSW_SERDESD 0x200 +#define E1000_CONNSW_AUTOSENSE_CONF 0x2 +#define E1000_CONNSW_AUTOSENSE_EN 0x1 #define E1000_PCS_CFG_PCS_EN 8 #define E1000_PCS_LCTL_FLV_LINK_UP 1 #define E1000_PCS_LCTL_FSV_100 2 @@ -235,11 +246,14 @@ #define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* BMC external code execution disabled */ +#define E1000_STATUS_2P5_SKU 0x00001000 /* Val of 2.5GBE SKU strap */ +#define E1000_STATUS_2P5_SKU_OVER 0x00002000 /* Val of 2.5GBE SKU Over */ /* Constants used to intrepret the masked PCI-X bus speed. */ #define SPEED_10 10 #define SPEED_100 100 #define SPEED_1000 1000 +#define SPEED_2500 2500 #define HALF_DUPLEX 1 #define FULL_DUPLEX 2 @@ -266,8 +280,10 @@ #define AUTONEG_ADVERTISE_SPEED_DEFAULT E1000_ALL_SPEED_DUPLEX /* LED Control */ -#define E1000_LEDCTL_LED0_MODE_SHIFT 0 -#define E1000_LEDCTL_LED0_BLINK 0x00000080 +#define E1000_LEDCTL_LED0_MODE_SHIFT 0 +#define E1000_LEDCTL_LED0_BLINK 0x00000080 +#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F +#define E1000_LEDCTL_LED0_IVRT 0x00000040 #define E1000_LEDCTL_MODE_LED_ON 0xE #define E1000_LEDCTL_MODE_LED_OFF 0xF @@ -290,34 +306,34 @@ #define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */ /* DMA Coalescing register fields */ -#define E1000_DMACR_DMACWT_MASK 0x00003FFF /* DMA Coalescing - * Watchdog Timer */ -#define E1000_DMACR_DMACTHR_MASK 0x00FF0000 /* DMA Coalescing Receive - * Threshold */ +#define E1000_DMACR_DMACWT_MASK 0x00003FFF /* DMA Coal Watchdog Timer */ +#define E1000_DMACR_DMACTHR_MASK 0x00FF0000 /* DMA Coal Rx Threshold */ #define E1000_DMACR_DMACTHR_SHIFT 16 -#define E1000_DMACR_DMAC_LX_MASK 0x30000000 /* Lx when no PCIe - * transactions */ +#define E1000_DMACR_DMAC_LX_MASK 0x30000000 /* Lx when no PCIe trans */ #define E1000_DMACR_DMAC_LX_SHIFT 28 #define E1000_DMACR_DMAC_EN 0x80000000 /* Enable DMA Coalescing */ +/* DMA Coalescing BMC-to-OS Watchdog Enable */ +#define E1000_DMACR_DC_BMC2OSW_EN 0x00008000 -#define E1000_DMCTXTH_DMCTTHR_MASK 0x00000FFF /* DMA Coalescing Transmit - * Threshold */ +#define E1000_DMCTXTH_DMCTTHR_MASK 0x00000FFF /* DMA Coal Tx Threshold */ #define E1000_DMCTLX_TTLX_MASK 0x00000FFF /* Time to LX request */ -#define E1000_DMCRTRH_UTRESH_MASK 0x0007FFFF /* Receive Traffic Rate - * Threshold */ -#define E1000_DMCRTRH_LRPRCW 0x80000000 /* Rcv packet rate in - * current window */ +#define E1000_DMCRTRH_UTRESH_MASK 0x0007FFFF /* Rx Traffic Rate Thresh */ +#define E1000_DMCRTRH_LRPRCW 0x80000000 /* Rx pkt rate curr window */ -#define E1000_DMCCNT_CCOUNT_MASK 0x01FFFFFF /* DMA Coal Rcv Traffic - * Current Cnt */ +#define E1000_DMCCNT_CCOUNT_MASK 0x01FFFFFF /* DMA Coal Rx Current Cnt */ -#define E1000_FCRTC_RTH_COAL_MASK 0x0003FFF0 /* Flow ctrl Rcv Threshold - * High val */ +#define E1000_FCRTC_RTH_COAL_MASK 0x0003FFF0 /* FC Rx Thresh High val */ #define E1000_FCRTC_RTH_COAL_SHIFT 4 #define E1000_PCIEMISC_LX_DECISION 0x00000080 /* Lx power decision */ +/* Timestamp in Rx buffer */ +#define E1000_RXPBS_CFG_TS_EN 0x80000000 + +#define I210_RXPBSIZE_DEFAULT 0x000000A2 /* RXPBSIZE default */ +#define I210_TXPBSIZE_DEFAULT 0x04000014 /* TXPBSIZE default */ + /* SerDes Control */ #define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400 @@ -356,6 +372,7 @@ #define E1000_ICR_RXDMT0 0x00000010 /* rx desc min. threshold (0) */ #define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */ #define E1000_ICR_VMMB 0x00000100 /* VM MB event */ +#define E1000_ICR_TS 0x00080000 /* Time Sync Interrupt */ #define E1000_ICR_DRSTA 0x40000000 /* Device Reset Asserted */ /* If this bit asserted, the driver should claim the interrupt */ #define E1000_ICR_INT_ASSERTED 0x80000000 @@ -374,8 +391,7 @@ #define E1000_EICR_OTHER 0x80000000 /* Interrupt Cause Active */ /* TCP Timer */ -/* - * This defines the bits that are set in the Interrupt Mask +/* This defines the bits that are set in the Interrupt Mask * Set/Read Register. Each bit is documented below: * o RXT0 = Receiver Timer Interrupt (ring 0) * o TXDW = Transmit Descriptor Written Back @@ -384,17 +400,18 @@ * o LSC = Link Status Change */ #define IMS_ENABLE_MASK ( \ - E1000_IMS_RXT0 | \ - E1000_IMS_TXDW | \ - E1000_IMS_RXDMT0 | \ - E1000_IMS_RXSEQ | \ - E1000_IMS_LSC | \ - E1000_IMS_DOUTSYNC) + E1000_IMS_RXT0 | \ + E1000_IMS_TXDW | \ + E1000_IMS_RXDMT0 | \ + E1000_IMS_RXSEQ | \ + E1000_IMS_LSC | \ + E1000_IMS_DOUTSYNC) /* Interrupt Mask Set */ #define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ #define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */ #define E1000_IMS_VMMB E1000_ICR_VMMB /* Mail box activity */ +#define E1000_IMS_TS E1000_ICR_TS /* Time Sync Interrupt */ #define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */ #define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */ #define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */ @@ -422,13 +439,16 @@ #define FLOW_CONTROL_ADDRESS_HIGH 0x00000100 #define FLOW_CONTROL_TYPE 0x8808 +/* Transmit Config Word */ +#define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */ +#define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */ + /* 802.1q VLAN Packet Size */ #define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMA'd) */ #define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */ /* Receive Address */ -/* - * Number of high/low register pairs in the RAR. The RAR (Receive Address +/* Number of high/low register pairs in the RAR. The RAR (Receive Address * Registers) holds the directed and multicast addresses that we monitor. * Technically, we have 16 spots. However, we reserve one of these spots * (RAR[15]) for our directed address used by controllers with @@ -441,7 +461,6 @@ #define E1000_RAH_POOL_1 0x00040000 /* Error Codes */ -#define E1000_SUCCESS 0 #define E1000_ERR_NVM 1 #define E1000_ERR_PHY 2 #define E1000_ERR_CONFIG 3 @@ -456,6 +475,8 @@ #define E1000_ERR_INVALID_ARGUMENT 16 #define E1000_ERR_NO_SPACE 17 #define E1000_ERR_NVM_PBA_SECTION 18 +#define E1000_ERR_INVM_VALUE_NOT_FOUND 19 +#define E1000_ERR_I2C 20 /* Loop limit on how long we wait for auto-negotiation to complete */ #define COPPER_LINK_UP_LIMIT 10 @@ -505,11 +526,84 @@ #define E1000_TIMINCA_16NS_SHIFT 24 +/* Time Sync Interrupt Cause/Mask Register Bits */ + +#define TSINTR_SYS_WRAP (1 << 0) /* SYSTIM Wrap around. */ +#define TSINTR_TXTS (1 << 1) /* Transmit Timestamp. */ +#define TSINTR_RXTS (1 << 2) /* Receive Timestamp. */ +#define TSINTR_TT0 (1 << 3) /* Target Time 0 Trigger. */ +#define TSINTR_TT1 (1 << 4) /* Target Time 1 Trigger. */ +#define TSINTR_AUTT0 (1 << 5) /* Auxiliary Timestamp 0 Taken. */ +#define TSINTR_AUTT1 (1 << 6) /* Auxiliary Timestamp 1 Taken. */ +#define TSINTR_TADJ (1 << 7) /* Time Adjust Done. */ + +#define TSYNC_INTERRUPTS TSINTR_TXTS +#define E1000_TSICR_TXTS TSINTR_TXTS + +/* TSAUXC Configuration Bits */ +#define TSAUXC_EN_TT0 (1 << 0) /* Enable target time 0. */ +#define TSAUXC_EN_TT1 (1 << 1) /* Enable target time 1. */ +#define TSAUXC_EN_CLK0 (1 << 2) /* Enable Configurable Frequency Clock 0. */ +#define TSAUXC_SAMP_AUT0 (1 << 3) /* Latch SYSTIML/H into AUXSTMPL/0. */ +#define TSAUXC_ST0 (1 << 4) /* Start Clock 0 Toggle on Target Time 0. */ +#define TSAUXC_EN_CLK1 (1 << 5) /* Enable Configurable Frequency Clock 1. */ +#define TSAUXC_SAMP_AUT1 (1 << 6) /* Latch SYSTIML/H into AUXSTMPL/1. */ +#define TSAUXC_ST1 (1 << 7) /* Start Clock 1 Toggle on Target Time 1. */ +#define TSAUXC_EN_TS0 (1 << 8) /* Enable hardware timestamp 0. */ +#define TSAUXC_AUTT0 (1 << 9) /* Auxiliary Timestamp Taken. */ +#define TSAUXC_EN_TS1 (1 << 10) /* Enable hardware timestamp 0. */ +#define TSAUXC_AUTT1 (1 << 11) /* Auxiliary Timestamp Taken. */ +#define TSAUXC_PLSG (1 << 17) /* Generate a pulse. */ +#define TSAUXC_DISABLE (1 << 31) /* Disable SYSTIM Count Operation. */ + +/* SDP Configuration Bits */ +#define AUX0_SEL_SDP0 (0 << 0) /* Assign SDP0 to auxiliary time stamp 0. */ +#define AUX0_SEL_SDP1 (1 << 0) /* Assign SDP1 to auxiliary time stamp 0. */ +#define AUX0_SEL_SDP2 (2 << 0) /* Assign SDP2 to auxiliary time stamp 0. */ +#define AUX0_SEL_SDP3 (3 << 0) /* Assign SDP3 to auxiliary time stamp 0. */ +#define AUX0_TS_SDP_EN (1 << 2) /* Enable auxiliary time stamp trigger 0. */ +#define AUX1_SEL_SDP0 (0 << 3) /* Assign SDP0 to auxiliary time stamp 1. */ +#define AUX1_SEL_SDP1 (1 << 3) /* Assign SDP1 to auxiliary time stamp 1. */ +#define AUX1_SEL_SDP2 (2 << 3) /* Assign SDP2 to auxiliary time stamp 1. */ +#define AUX1_SEL_SDP3 (3 << 3) /* Assign SDP3 to auxiliary time stamp 1. */ +#define AUX1_TS_SDP_EN (1 << 5) /* Enable auxiliary time stamp trigger 1. */ +#define TS_SDP0_SEL_TT0 (0 << 6) /* Target time 0 is output on SDP0. */ +#define TS_SDP0_SEL_TT1 (1 << 6) /* Target time 1 is output on SDP0. */ +#define TS_SDP0_SEL_FC0 (2 << 6) /* Freq clock 0 is output on SDP0. */ +#define TS_SDP0_SEL_FC1 (3 << 6) /* Freq clock 1 is output on SDP0. */ +#define TS_SDP0_EN (1 << 8) /* SDP0 is assigned to Tsync. */ +#define TS_SDP1_SEL_TT0 (0 << 9) /* Target time 0 is output on SDP1. */ +#define TS_SDP1_SEL_TT1 (1 << 9) /* Target time 1 is output on SDP1. */ +#define TS_SDP1_SEL_FC0 (2 << 9) /* Freq clock 0 is output on SDP1. */ +#define TS_SDP1_SEL_FC1 (3 << 9) /* Freq clock 1 is output on SDP1. */ +#define TS_SDP1_EN (1 << 11) /* SDP1 is assigned to Tsync. */ +#define TS_SDP2_SEL_TT0 (0 << 12) /* Target time 0 is output on SDP2. */ +#define TS_SDP2_SEL_TT1 (1 << 12) /* Target time 1 is output on SDP2. */ +#define TS_SDP2_SEL_FC0 (2 << 12) /* Freq clock 0 is output on SDP2. */ +#define TS_SDP2_SEL_FC1 (3 << 12) /* Freq clock 1 is output on SDP2. */ +#define TS_SDP2_EN (1 << 14) /* SDP2 is assigned to Tsync. */ +#define TS_SDP3_SEL_TT0 (0 << 15) /* Target time 0 is output on SDP3. */ +#define TS_SDP3_SEL_TT1 (1 << 15) /* Target time 1 is output on SDP3. */ +#define TS_SDP3_SEL_FC0 (2 << 15) /* Freq clock 0 is output on SDP3. */ +#define TS_SDP3_SEL_FC1 (3 << 15) /* Freq clock 1 is output on SDP3. */ +#define TS_SDP3_EN (1 << 17) /* SDP3 is assigned to Tsync. */ + #define E1000_MDICNFG_EXT_MDIO 0x80000000 /* MDI ext/int destination */ #define E1000_MDICNFG_COM_MDIO 0x40000000 /* MDI shared w/ lan 0 */ #define E1000_MDICNFG_PHY_MASK 0x03E00000 #define E1000_MDICNFG_PHY_SHIFT 21 +#define E1000_MEDIA_PORT_COPPER 1 +#define E1000_MEDIA_PORT_OTHER 2 +#define E1000_M88E1112_AUTO_COPPER_SGMII 0x2 +#define E1000_M88E1112_AUTO_COPPER_BASEX 0x3 +#define E1000_M88E1112_STATUS_LINK 0x0004 /* Interface Link Bit */ +#define E1000_M88E1112_MAC_CTRL_1 0x10 +#define E1000_M88E1112_MAC_CTRL_1_MODE_MASK 0x0380 /* Mode Select */ +#define E1000_M88E1112_MAC_CTRL_1_MODE_SHIFT 7 +#define E1000_M88E1112_PAGE_ADDR 0x16 +#define E1000_M88E1112_STATUS 0x01 + /* PCI Express Control */ #define E1000_GCR_CMPL_TMOUT_MASK 0x0000F000 #define E1000_GCR_CMPL_TMOUT_10ms 0x00001000 @@ -526,6 +620,9 @@ /* mPHY Near End Digital Loopback Override Bit */ #define E1000_MPHY_PCS_CLK_REG_DIGINELBEN 0x10 +#define E1000_PCS_LCTL_FORCE_FCTRL 0x80 +#define E1000_PCS_LSTS_AN_COMPLETE 0x10000 + /* PHY Control Register */ #define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ #define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ @@ -593,6 +690,31 @@ #define E1000_EECD_AUTO_RD 0x00000200 /* NVM Auto Read done */ #define E1000_EECD_SIZE_EX_MASK 0x00007800 /* NVM Size */ #define E1000_EECD_SIZE_EX_SHIFT 11 +#define E1000_EECD_FLUPD_I210 0x00800000 /* Update FLASH */ +#define E1000_EECD_FLUDONE_I210 0x04000000 /* Update FLASH done*/ +#define E1000_EECD_FLASH_DETECTED_I210 0x00080000 /* FLASH detected */ +#define E1000_FLUDONE_ATTEMPTS 20000 +#define E1000_EERD_EEWR_MAX_COUNT 512 /* buffered EEPROM words rw */ +#define E1000_I210_FIFO_SEL_RX 0x00 +#define E1000_I210_FIFO_SEL_TX_QAV(_i) (0x02 + (_i)) +#define E1000_I210_FIFO_SEL_TX_LEGACY E1000_I210_FIFO_SEL_TX_QAV(0) +#define E1000_I210_FIFO_SEL_BMC2OS_TX 0x06 +#define E1000_I210_FIFO_SEL_BMC2OS_RX 0x01 +#define E1000_I210_FLASH_SECTOR_SIZE 0x1000 /* 4KB FLASH sector unit size */ +/* Secure FLASH mode requires removing MSb */ +#define E1000_I210_FW_PTR_MASK 0x7FFF +/* Firmware code revision field word offset*/ +#define E1000_I210_FW_VER_OFFSET 328 +#define E1000_EECD_FLUPD_I210 0x00800000 /* Update FLASH */ +#define E1000_EECD_FLUDONE_I210 0x04000000 /* Update FLASH done*/ +#define E1000_FLUDONE_ATTEMPTS 20000 +#define E1000_EERD_EEWR_MAX_COUNT 512 /* buffered EEPROM words rw */ +#define E1000_I210_FIFO_SEL_RX 0x00 +#define E1000_I210_FIFO_SEL_TX_QAV(_i) (0x02 + (_i)) +#define E1000_I210_FIFO_SEL_TX_LEGACY E1000_I210_FIFO_SEL_TX_QAV(0) +#define E1000_I210_FIFO_SEL_BMC2OS_TX 0x06 +#define E1000_I210_FIFO_SEL_BMC2OS_RX 0x01 + /* Offset to data in NVM read/write registers */ #define E1000_NVM_RW_REG_DATA 16 @@ -604,6 +726,7 @@ /* NVM Word Offsets */ #define NVM_COMPAT 0x0003 #define NVM_ID_LED_SETTINGS 0x0004 /* SERDES output amplitude */ +#define NVM_VERSION 0x0005 #define NVM_INIT_CONTROL2_REG 0x000F #define NVM_INIT_CONTROL3_PORT_B 0x0014 #define NVM_INIT_CONTROL3_PORT_A 0x0024 @@ -611,6 +734,47 @@ #define NVM_CHECKSUM_REG 0x003F #define NVM_COMPATIBILITY_REG_3 0x0003 #define NVM_COMPATIBILITY_BIT_MASK 0x8000 +#define NVM_MAC_ADDR 0x0000 +#define NVM_SUB_DEV_ID 0x000B +#define NVM_SUB_VEN_ID 0x000C +#define NVM_DEV_ID 0x000D +#define NVM_VEN_ID 0x000E +#define NVM_INIT_CTRL_2 0x000F +#define NVM_INIT_CTRL_4 0x0013 +#define NVM_LED_1_CFG 0x001C +#define NVM_LED_0_2_CFG 0x001F +#define NVM_ETRACK_WORD 0x0042 +#define NVM_ETRACK_HIWORD 0x0043 +#define NVM_COMB_VER_OFF 0x0083 +#define NVM_COMB_VER_PTR 0x003d + +/* NVM version defines */ +#define NVM_MAJOR_MASK 0xF000 +#define NVM_MINOR_MASK 0x0FF0 +#define NVM_IMAGE_ID_MASK 0x000F +#define NVM_COMB_VER_MASK 0x00FF +#define NVM_MAJOR_SHIFT 12 +#define NVM_MINOR_SHIFT 4 +#define NVM_COMB_VER_SHFT 8 +#define NVM_VER_INVALID 0xFFFF +#define NVM_ETRACK_SHIFT 16 +#define NVM_ETRACK_VALID 0x8000 +#define NVM_NEW_DEC_MASK 0x0F00 +#define NVM_HEX_CONV 16 +#define NVM_HEX_TENS 10 + +#define NVM_ETS_CFG 0x003E +#define NVM_ETS_LTHRES_DELTA_MASK 0x07C0 +#define NVM_ETS_LTHRES_DELTA_SHIFT 6 +#define NVM_ETS_TYPE_MASK 0x0038 +#define NVM_ETS_TYPE_SHIFT 3 +#define NVM_ETS_TYPE_EMC 0x000 +#define NVM_ETS_NUM_SENSORS_MASK 0x0007 +#define NVM_ETS_DATA_LOC_MASK 0x3C00 +#define NVM_ETS_DATA_LOC_SHIFT 10 +#define NVM_ETS_DATA_INDEX_MASK 0x0300 +#define NVM_ETS_DATA_INDEX_SHIFT 8 +#define NVM_ETS_DATA_HTHRESH_MASK 0x00FF #define E1000_NVM_CFG_DONE_PORT_0 0x040000 /* MNG config cycle done */ #define E1000_NVM_CFG_DONE_PORT_1 0x080000 /* ...for second port */ @@ -637,6 +801,7 @@ #define NVM_PBA_OFFSET_0 8 #define NVM_PBA_OFFSET_1 9 +#define NVM_RESERVED_WORD 0xFFFF #define NVM_PBA_PTR_GUARD 0xFAFA #define NVM_WORD_SIZE_BASE_SHIFT 6 @@ -683,8 +848,7 @@ #define MAX_PHY_MULTI_PAGE_REG 0xF /* Bit definitions for valid PHY IDs. */ -/* - * I = Integrated +/* I = Integrated * E = External */ #define M88E1111_I_PHY_ID 0x01410CC0 @@ -694,6 +858,8 @@ #define I82580_I_PHY_ID 0x015403A0 #define I350_I_PHY_ID 0x015403B0 #define M88_VENDOR 0x0141 +#define I210_I_PHY_ID 0x01410C00 +#define M88E1543_E_PHY_ID 0x01410EA0 /* M88E1000 Specific Registers */ #define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */ @@ -713,8 +879,7 @@ #define M88E1000_PSCR_AUTO_X_1000T 0x0040 /* Auto crossover enabled all speeds */ #define M88E1000_PSCR_AUTO_X_MODE 0x0060 -/* - * 1=Enable Extended 10BASE-T distance (Lower 10BASE-T Rx Threshold +/* 1=Enable Extended 10BASE-T distance (Lower 10BASE-T Rx Threshold * 0=Normal 10BASE-T Rx Threshold */ /* 1=5-bit interface in 100BASE-TX, 0=MII interface in 100BASE-TX */ @@ -724,8 +889,7 @@ #define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */ #define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */ #define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */ -/* - * 0 = <50M +/* 0 = <50M * 1 = 50-80M * 2 = 80-110M * 3 = 110-140M @@ -738,20 +902,17 @@ #define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7 /* M88E1000 Extended PHY Specific Control Register */ -/* - * 1 = Lost lock detect enabled. +/* 1 = Lost lock detect enabled. * Will assert lost lock and bring * link down if idle not seen * within 1ms in 1000BASE-T */ -/* - * Number of times we will attempt to autonegotiate before downshifting if we +/* Number of times we will attempt to autonegotiate before downshifting if we * are the master */ #define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00 #define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000 -/* - * Number of times we will attempt to autonegotiate before downshifting if we +/* Number of times we will attempt to autonegotiate before downshifting if we * are the slave */ #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300 @@ -766,8 +927,7 @@ /* i347-AT4 Extended PHY Specific Control Register */ -/* - * Number of times we will attempt to autonegotiate before downshifting if we +/* Number of times we will attempt to autonegotiate before downshifting if we * are the master */ #define I347AT4_PSCR_DOWNSHIFT_ENABLE 0x0800 @@ -813,7 +973,26 @@ #define E1000_IPCNFG_EEE_100M_AN 0x00000004 /* EEE Enable 100M AN */ #define E1000_EEER_TX_LPI_EN 0x00010000 /* EEE Tx LPI Enable */ #define E1000_EEER_RX_LPI_EN 0x00020000 /* EEE Rx LPI Enable */ +#define E1000_EEER_FRC_AN 0x10000000 /* Enable EEE in loopback */ #define E1000_EEER_LPI_FC 0x00040000 /* EEE Enable on FC */ +#define E1000_EEE_SU_LPI_CLK_STP 0X00800000 /* EEE LPI Clock Stop */ +#define E1000_EEER_EEE_NEG 0x20000000 /* EEE capability nego */ +#define E1000_EEE_LP_ADV_ADDR_I350 0x040F /* EEE LP Advertisement */ +#define E1000_EEE_LP_ADV_DEV_I210 7 /* EEE LP Adv Device */ +#define E1000_EEE_LP_ADV_ADDR_I210 61 /* EEE LP Adv Register */ +#define E1000_MMDAC_FUNC_DATA 0x4000 /* Data, no post increment */ +#define E1000_M88E1543_PAGE_ADDR 0x16 /* Page Offset Register */ +#define E1000_M88E1543_EEE_CTRL_1 0x0 +#define E1000_M88E1543_EEE_CTRL_1_MS 0x0001 /* EEE Master/Slave */ +#define E1000_EEE_ADV_DEV_I354 7 +#define E1000_EEE_ADV_ADDR_I354 60 +#define E1000_EEE_ADV_100_SUPPORTED (1 << 1) /* 100BaseTx EEE Supported */ +#define E1000_EEE_ADV_1000_SUPPORTED (1 << 2) /* 1000BaseT EEE Supported */ +#define E1000_PCS_STATUS_DEV_I354 3 +#define E1000_PCS_STATUS_ADDR_I354 1 +#define E1000_PCS_STATUS_TX_LPI_IND 0x0200 /* Tx in LPI state */ +#define E1000_PCS_STATUS_RX_LPI_RCVD 0x0400 +#define E1000_PCS_STATUS_TX_LPI_RCVD 0x0800 /* SerDes Control */ #define E1000_GEN_CTL_READY 0x80000000 @@ -825,8 +1004,7 @@ #define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F /* DMA Coalescing register fields */ -#define E1000_PCIEMISC_LX_DECISION 0x00000080 /* Lx power decision based - on DMA coal */ +#define E1000_PCIEMISC_LX_DECISION 0x00000080 /* Lx power on DMA coal */ /* Tx Rate-Scheduler Config fields */ #define E1000_RTTBCNRC_RS_ENA 0x80000000 |