diff options
Diffstat (limited to 'drivers/net/ethernet/intel/igb/e1000_82575.c')
| -rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_82575.c | 1386 |
1 files changed, 979 insertions, 407 deletions
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index ca4641e2f74..ee74f9536b3 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -1,29 +1,25 @@ -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +/* Intel(R) Gigabit Ethernet Linux driver + * Copyright(c) 2007-2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, see <http://www.gnu.org/licenses/>. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ /* e1000_82575 * e1000_82576 @@ -33,6 +29,7 @@ #include <linux/types.h> #include <linux/if_ether.h> +#include <linux/i2c.h> #include "e1000_mac.h" #include "e1000_82575.h" @@ -73,11 +70,8 @@ static s32 igb_validate_nvm_checksum_82580(struct e1000_hw *hw); static s32 igb_update_nvm_checksum_82580(struct e1000_hw *hw); static s32 igb_validate_nvm_checksum_i350(struct e1000_hw *hw); static s32 igb_update_nvm_checksum_i350(struct e1000_hw *hw); -static const u16 e1000_82580_rxpbs_table[] = - { 36, 72, 144, 1, 2, 4, 8, 16, - 35, 70, 140 }; -#define E1000_82580_RXPBS_TABLE_SIZE \ - (sizeof(e1000_82580_rxpbs_table)/sizeof(u16)) +static const u16 e1000_82580_rxpbs_table[] = { + 36, 72, 144, 1, 2, 4, 8, 16, 35, 70, 140 }; /** * igb_sgmii_uses_mdio_82575 - Determine if I2C pins are for external MDIO @@ -99,6 +93,7 @@ static bool igb_sgmii_uses_mdio_82575(struct e1000_hw *hw) break; case e1000_82580: case e1000_i350: + case e1000_i354: case e1000_i210: case e1000_i211: reg = rd32(E1000_MDICNFG); @@ -110,91 +105,282 @@ static bool igb_sgmii_uses_mdio_82575(struct e1000_hw *hw) return ext_mdio; } -static s32 igb_get_invariants_82575(struct e1000_hw *hw) +/** + * igb_check_for_link_media_swap - Check which M88E1112 interface linked + * @hw: pointer to the HW structure + * + * Poll the M88E1112 interfaces to see which interface achieved link. + */ +static s32 igb_check_for_link_media_swap(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; - struct e1000_nvm_info *nvm = &hw->nvm; - struct e1000_mac_info *mac = &hw->mac; - struct e1000_dev_spec_82575 * dev_spec = &hw->dev_spec._82575; - u32 eecd; s32 ret_val; - u16 size; - u32 ctrl_ext = 0; + u16 data; + u8 port = 0; - switch (hw->device_id) { - case E1000_DEV_ID_82575EB_COPPER: - case E1000_DEV_ID_82575EB_FIBER_SERDES: - case E1000_DEV_ID_82575GB_QUAD_COPPER: - mac->type = e1000_82575; + /* Check the copper medium. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0); + if (ret_val) + return ret_val; + + ret_val = phy->ops.read_reg(hw, E1000_M88E1112_STATUS, &data); + if (ret_val) + return ret_val; + + if (data & E1000_M88E1112_STATUS_LINK) + port = E1000_MEDIA_PORT_COPPER; + + /* Check the other medium. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 1); + if (ret_val) + return ret_val; + + ret_val = phy->ops.read_reg(hw, E1000_M88E1112_STATUS, &data); + if (ret_val) + return ret_val; + + /* reset page to 0 */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0); + if (ret_val) + return ret_val; + + if (data & E1000_M88E1112_STATUS_LINK) + port = E1000_MEDIA_PORT_OTHER; + + /* Determine if a swap needs to happen. */ + if (port && (hw->dev_spec._82575.media_port != port)) { + hw->dev_spec._82575.media_port = port; + hw->dev_spec._82575.media_changed = true; + } else { + ret_val = igb_check_for_link_82575(hw); + } + + return 0; +} + +/** + * igb_init_phy_params_82575 - Init PHY func ptrs. + * @hw: pointer to the HW structure + **/ +static s32 igb_init_phy_params_82575(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = 0; + u32 ctrl_ext; + + if (hw->phy.media_type != e1000_media_type_copper) { + phy->type = e1000_phy_none; + goto out; + } + + phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; + phy->reset_delay_us = 100; + + ctrl_ext = rd32(E1000_CTRL_EXT); + + if (igb_sgmii_active_82575(hw)) { + phy->ops.reset = igb_phy_hw_reset_sgmii_82575; + ctrl_ext |= E1000_CTRL_I2C_ENA; + } else { + phy->ops.reset = igb_phy_hw_reset; + ctrl_ext &= ~E1000_CTRL_I2C_ENA; + } + + wr32(E1000_CTRL_EXT, ctrl_ext); + igb_reset_mdicnfg_82580(hw); + + if (igb_sgmii_active_82575(hw) && !igb_sgmii_uses_mdio_82575(hw)) { + phy->ops.read_reg = igb_read_phy_reg_sgmii_82575; + phy->ops.write_reg = igb_write_phy_reg_sgmii_82575; + } else { + switch (hw->mac.type) { + case e1000_82580: + case e1000_i350: + case e1000_i354: + phy->ops.read_reg = igb_read_phy_reg_82580; + phy->ops.write_reg = igb_write_phy_reg_82580; + break; + case e1000_i210: + case e1000_i211: + phy->ops.read_reg = igb_read_phy_reg_gs40g; + phy->ops.write_reg = igb_write_phy_reg_gs40g; + break; + default: + phy->ops.read_reg = igb_read_phy_reg_igp; + phy->ops.write_reg = igb_write_phy_reg_igp; + } + } + + /* set lan id */ + hw->bus.func = (rd32(E1000_STATUS) & E1000_STATUS_FUNC_MASK) >> + E1000_STATUS_FUNC_SHIFT; + + /* Set phy->phy_addr and phy->id. */ + ret_val = igb_get_phy_id_82575(hw); + if (ret_val) + return ret_val; + + /* Verify phy id and set remaining function pointers */ + switch (phy->id) { + case M88E1543_E_PHY_ID: + case I347AT4_E_PHY_ID: + case M88E1112_E_PHY_ID: + case M88E1111_I_PHY_ID: + phy->type = e1000_phy_m88; + phy->ops.check_polarity = igb_check_polarity_m88; + phy->ops.get_phy_info = igb_get_phy_info_m88; + if (phy->id != M88E1111_I_PHY_ID) + phy->ops.get_cable_length = + igb_get_cable_length_m88_gen2; + else + phy->ops.get_cable_length = igb_get_cable_length_m88; + phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88; + /* Check if this PHY is confgured for media swap. */ + if (phy->id == M88E1112_E_PHY_ID) { + u16 data; + + ret_val = phy->ops.write_reg(hw, + E1000_M88E1112_PAGE_ADDR, + 2); + if (ret_val) + goto out; + + ret_val = phy->ops.read_reg(hw, + E1000_M88E1112_MAC_CTRL_1, + &data); + if (ret_val) + goto out; + + data = (data & E1000_M88E1112_MAC_CTRL_1_MODE_MASK) >> + E1000_M88E1112_MAC_CTRL_1_MODE_SHIFT; + if (data == E1000_M88E1112_AUTO_COPPER_SGMII || + data == E1000_M88E1112_AUTO_COPPER_BASEX) + hw->mac.ops.check_for_link = + igb_check_for_link_media_swap; + } break; - case E1000_DEV_ID_82576: - case E1000_DEV_ID_82576_NS: - case E1000_DEV_ID_82576_NS_SERDES: - case E1000_DEV_ID_82576_FIBER: - case E1000_DEV_ID_82576_SERDES: - case E1000_DEV_ID_82576_QUAD_COPPER: - case E1000_DEV_ID_82576_QUAD_COPPER_ET2: - case E1000_DEV_ID_82576_SERDES_QUAD: - mac->type = e1000_82576; + case IGP03E1000_E_PHY_ID: + phy->type = e1000_phy_igp_3; + phy->ops.get_phy_info = igb_get_phy_info_igp; + phy->ops.get_cable_length = igb_get_cable_length_igp_2; + phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_igp; + phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82575; + phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state; break; - case E1000_DEV_ID_82580_COPPER: - case E1000_DEV_ID_82580_FIBER: - case E1000_DEV_ID_82580_QUAD_FIBER: - case E1000_DEV_ID_82580_SERDES: - case E1000_DEV_ID_82580_SGMII: - case E1000_DEV_ID_82580_COPPER_DUAL: - case E1000_DEV_ID_DH89XXCC_SGMII: - case E1000_DEV_ID_DH89XXCC_SERDES: - case E1000_DEV_ID_DH89XXCC_BACKPLANE: - case E1000_DEV_ID_DH89XXCC_SFP: - mac->type = e1000_82580; + case I82580_I_PHY_ID: + case I350_I_PHY_ID: + phy->type = e1000_phy_82580; + phy->ops.force_speed_duplex = + igb_phy_force_speed_duplex_82580; + phy->ops.get_cable_length = igb_get_cable_length_82580; + phy->ops.get_phy_info = igb_get_phy_info_82580; + phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82580; + phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state_82580; break; - case E1000_DEV_ID_I350_COPPER: - case E1000_DEV_ID_I350_FIBER: - case E1000_DEV_ID_I350_SERDES: - case E1000_DEV_ID_I350_SGMII: - mac->type = e1000_i350; + case I210_I_PHY_ID: + phy->type = e1000_phy_i210; + phy->ops.check_polarity = igb_check_polarity_m88; + phy->ops.get_phy_info = igb_get_phy_info_m88; + phy->ops.get_cable_length = igb_get_cable_length_m88_gen2; + phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82580; + phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state_82580; + phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88; break; - case E1000_DEV_ID_I210_COPPER: - case E1000_DEV_ID_I210_COPPER_OEM1: - case E1000_DEV_ID_I210_COPPER_IT: - case E1000_DEV_ID_I210_FIBER: - case E1000_DEV_ID_I210_SERDES: - case E1000_DEV_ID_I210_SGMII: - mac->type = e1000_i210; + default: + ret_val = -E1000_ERR_PHY; + goto out; + } + +out: + return ret_val; +} + +/** + * igb_init_nvm_params_82575 - Init NVM func ptrs. + * @hw: pointer to the HW structure + **/ +static s32 igb_init_nvm_params_82575(struct e1000_hw *hw) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 eecd = rd32(E1000_EECD); + u16 size; + + size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >> + E1000_EECD_SIZE_EX_SHIFT); + + /* Added to a constant, "size" becomes the left-shift value + * for setting word_size. + */ + size += NVM_WORD_SIZE_BASE_SHIFT; + + /* Just in case size is out of range, cap it to the largest + * EEPROM size supported + */ + if (size > 15) + size = 15; + + nvm->word_size = 1 << size; + nvm->opcode_bits = 8; + nvm->delay_usec = 1; + + switch (nvm->override) { + case e1000_nvm_override_spi_large: + nvm->page_size = 32; + nvm->address_bits = 16; break; - case E1000_DEV_ID_I211_COPPER: - mac->type = e1000_i211; + case e1000_nvm_override_spi_small: + nvm->page_size = 8; + nvm->address_bits = 8; break; default: - return -E1000_ERR_MAC_INIT; + nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8; + nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? + 16 : 8; break; } + if (nvm->word_size == (1 << 15)) + nvm->page_size = 128; - /* Set media type */ - /* - * The 82575 uses bits 22:23 for link mode. The mode can be changed - * based on the EEPROM. We cannot rely upon device ID. There - * is no distinguishable difference between fiber and internal - * SerDes mode on the 82575. There can be an external PHY attached - * on the SGMII interface. For this, we'll set sgmii_active to true. - */ - phy->media_type = e1000_media_type_copper; - dev_spec->sgmii_active = false; + nvm->type = e1000_nvm_eeprom_spi; - ctrl_ext = rd32(E1000_CTRL_EXT); - switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) { - case E1000_CTRL_EXT_LINK_MODE_SGMII: - dev_spec->sgmii_active = true; + /* NVM Function Pointers */ + nvm->ops.acquire = igb_acquire_nvm_82575; + nvm->ops.release = igb_release_nvm_82575; + nvm->ops.write = igb_write_nvm_spi; + nvm->ops.validate = igb_validate_nvm_checksum; + nvm->ops.update = igb_update_nvm_checksum; + if (nvm->word_size < (1 << 15)) + nvm->ops.read = igb_read_nvm_eerd; + else + nvm->ops.read = igb_read_nvm_spi; + + /* override generic family function pointers for specific descendants */ + switch (hw->mac.type) { + case e1000_82580: + nvm->ops.validate = igb_validate_nvm_checksum_82580; + nvm->ops.update = igb_update_nvm_checksum_82580; break; - case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX: - case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES: - hw->phy.media_type = e1000_media_type_internal_serdes; + case e1000_i354: + case e1000_i350: + nvm->ops.validate = igb_validate_nvm_checksum_i350; + nvm->ops.update = igb_update_nvm_checksum_i350; break; default: break; } + return 0; +} + +/** + * igb_init_mac_params_82575 - Init MAC func ptrs. + * @hw: pointer to the HW structure + **/ +static s32 igb_init_mac_params_82575(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575; + /* Set mta register count */ mac->mta_reg_count = 128; /* Set rar entry count */ @@ -206,6 +392,7 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) mac->rar_entry_count = E1000_RAR_ENTRIES_82580; break; case e1000_i350: + case e1000_i354: mac->rar_entry_count = E1000_RAR_ENTRIES_I350; break; default: @@ -221,6 +408,7 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) if (mac->type >= e1000_i210) { mac->ops.acquire_swfw_sync = igb_acquire_swfw_sync_i210; mac->ops.release_swfw_sync = igb_release_swfw_sync_i210; + } else { mac->ops.acquire_swfw_sync = igb_acquire_swfw_sync_82575; mac->ops.release_swfw_sync = igb_release_swfw_sync_82575; @@ -237,224 +425,260 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) dev_spec->eee_disable = false; else dev_spec->eee_disable = true; + /* Allow a single clear of the SW semaphore on I210 and newer */ + if (mac->type >= e1000_i210) + dev_spec->clear_semaphore_once = true; /* physical interface link setup */ mac->ops.setup_physical_interface = (hw->phy.media_type == e1000_media_type_copper) ? igb_setup_copper_link_82575 : igb_setup_serdes_link_82575; - /* NVM initialization */ - eecd = rd32(E1000_EECD); - size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >> - E1000_EECD_SIZE_EX_SHIFT); + if (mac->type == e1000_82580) { + switch (hw->device_id) { + /* feature not supported on these id's */ + case E1000_DEV_ID_DH89XXCC_SGMII: + case E1000_DEV_ID_DH89XXCC_SERDES: + case E1000_DEV_ID_DH89XXCC_BACKPLANE: + case E1000_DEV_ID_DH89XXCC_SFP: + break; + default: + hw->dev_spec._82575.mas_capable = true; + break; + } + } + return 0; +} - /* - * Added to a constant, "size" becomes the left-shift value - * for setting word_size. - */ - size += NVM_WORD_SIZE_BASE_SHIFT; +/** + * igb_set_sfp_media_type_82575 - derives SFP module media type. + * @hw: pointer to the HW structure + * + * The media type is chosen based on SFP module. + * compatibility flags retrieved from SFP ID EEPROM. + **/ +static s32 igb_set_sfp_media_type_82575(struct e1000_hw *hw) +{ + s32 ret_val = E1000_ERR_CONFIG; + u32 ctrl_ext = 0; + struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575; + struct e1000_sfp_flags *eth_flags = &dev_spec->eth_flags; + u8 tranceiver_type = 0; + s32 timeout = 3; - /* - * Check for invalid size - */ - if ((hw->mac.type == e1000_82576) && (size > 15)) { - pr_notice("The NVM size is not valid, defaulting to 32K\n"); - size = 15; - } + /* Turn I2C interface ON and power on sfp cage */ + ctrl_ext = rd32(E1000_CTRL_EXT); + ctrl_ext &= ~E1000_CTRL_EXT_SDP3_DATA; + wr32(E1000_CTRL_EXT, ctrl_ext | E1000_CTRL_I2C_ENA); - nvm->word_size = 1 << size; - if (hw->mac.type < e1000_i210) { - nvm->opcode_bits = 8; - nvm->delay_usec = 1; - switch (nvm->override) { - case e1000_nvm_override_spi_large: - nvm->page_size = 32; - nvm->address_bits = 16; - break; - case e1000_nvm_override_spi_small: - nvm->page_size = 8; - nvm->address_bits = 8; - break; - default: - nvm->page_size = eecd - & E1000_EECD_ADDR_BITS ? 32 : 8; - nvm->address_bits = eecd - & E1000_EECD_ADDR_BITS ? 16 : 8; + wrfl(); + + /* Read SFP module data */ + while (timeout) { + ret_val = igb_read_sfp_data_byte(hw, + E1000_I2CCMD_SFP_DATA_ADDR(E1000_SFF_IDENTIFIER_OFFSET), + &tranceiver_type); + if (ret_val == 0) break; + msleep(100); + timeout--; + } + if (ret_val != 0) + goto out; + + ret_val = igb_read_sfp_data_byte(hw, + E1000_I2CCMD_SFP_DATA_ADDR(E1000_SFF_ETH_FLAGS_OFFSET), + (u8 *)eth_flags); + if (ret_val != 0) + goto out; + + /* Check if there is some SFP module plugged and powered */ + if ((tranceiver_type == E1000_SFF_IDENTIFIER_SFP) || + (tranceiver_type == E1000_SFF_IDENTIFIER_SFF)) { + dev_spec->module_plugged = true; + if (eth_flags->e1000_base_lx || eth_flags->e1000_base_sx) { + hw->phy.media_type = e1000_media_type_internal_serdes; + } else if (eth_flags->e100_base_fx) { + dev_spec->sgmii_active = true; + hw->phy.media_type = e1000_media_type_internal_serdes; + } else if (eth_flags->e1000_base_t) { + dev_spec->sgmii_active = true; + hw->phy.media_type = e1000_media_type_copper; + } else { + hw->phy.media_type = e1000_media_type_unknown; + hw_dbg("PHY module has not been recognized\n"); + goto out; } - if (nvm->word_size == (1 << 15)) - nvm->page_size = 128; + } else { + hw->phy.media_type = e1000_media_type_unknown; + } + ret_val = 0; +out: + /* Restore I2C interface setting */ + wr32(E1000_CTRL_EXT, ctrl_ext); + return ret_val; +} - nvm->type = e1000_nvm_eeprom_spi; - } else - nvm->type = e1000_nvm_flash_hw; +static s32 igb_get_invariants_82575(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575; + s32 ret_val; + u32 ctrl_ext = 0; + u32 link_mode = 0; - /* NVM Function Pointers */ - switch (hw->mac.type) { - case e1000_82580: - nvm->ops.validate = igb_validate_nvm_checksum_82580; - nvm->ops.update = igb_update_nvm_checksum_82580; - nvm->ops.acquire = igb_acquire_nvm_82575; - nvm->ops.release = igb_release_nvm_82575; - if (nvm->word_size < (1 << 15)) - nvm->ops.read = igb_read_nvm_eerd; - else - nvm->ops.read = igb_read_nvm_spi; - nvm->ops.write = igb_write_nvm_spi; + switch (hw->device_id) { + case E1000_DEV_ID_82575EB_COPPER: + case E1000_DEV_ID_82575EB_FIBER_SERDES: + case E1000_DEV_ID_82575GB_QUAD_COPPER: + mac->type = e1000_82575; break; - case e1000_i350: - nvm->ops.validate = igb_validate_nvm_checksum_i350; - nvm->ops.update = igb_update_nvm_checksum_i350; - nvm->ops.acquire = igb_acquire_nvm_82575; - nvm->ops.release = igb_release_nvm_82575; - if (nvm->word_size < (1 << 15)) - nvm->ops.read = igb_read_nvm_eerd; - else - nvm->ops.read = igb_read_nvm_spi; - nvm->ops.write = igb_write_nvm_spi; + case E1000_DEV_ID_82576: + case E1000_DEV_ID_82576_NS: + case E1000_DEV_ID_82576_NS_SERDES: + case E1000_DEV_ID_82576_FIBER: + case E1000_DEV_ID_82576_SERDES: + case E1000_DEV_ID_82576_QUAD_COPPER: + case E1000_DEV_ID_82576_QUAD_COPPER_ET2: + case E1000_DEV_ID_82576_SERDES_QUAD: + mac->type = e1000_82576; break; - case e1000_i210: - nvm->ops.validate = igb_validate_nvm_checksum_i210; - nvm->ops.update = igb_update_nvm_checksum_i210; - nvm->ops.acquire = igb_acquire_nvm_i210; - nvm->ops.release = igb_release_nvm_i210; - nvm->ops.read = igb_read_nvm_srrd_i210; - nvm->ops.valid_led_default = igb_valid_led_default_i210; + case E1000_DEV_ID_82580_COPPER: + case E1000_DEV_ID_82580_FIBER: + case E1000_DEV_ID_82580_QUAD_FIBER: + case E1000_DEV_ID_82580_SERDES: + case E1000_DEV_ID_82580_SGMII: + case E1000_DEV_ID_82580_COPPER_DUAL: + case E1000_DEV_ID_DH89XXCC_SGMII: + case E1000_DEV_ID_DH89XXCC_SERDES: + case E1000_DEV_ID_DH89XXCC_BACKPLANE: + case E1000_DEV_ID_DH89XXCC_SFP: + mac->type = e1000_82580; break; - case e1000_i211: - nvm->ops.acquire = igb_acquire_nvm_i210; - nvm->ops.release = igb_release_nvm_i210; - nvm->ops.read = igb_read_nvm_i211; - nvm->ops.valid_led_default = igb_valid_led_default_i210; - nvm->ops.validate = NULL; - nvm->ops.update = NULL; - nvm->ops.write = NULL; + case E1000_DEV_ID_I350_COPPER: + case E1000_DEV_ID_I350_FIBER: + case E1000_DEV_ID_I350_SERDES: + case E1000_DEV_ID_I350_SGMII: + mac->type = e1000_i350; break; - default: - nvm->ops.validate = igb_validate_nvm_checksum; - nvm->ops.update = igb_update_nvm_checksum; - nvm->ops.acquire = igb_acquire_nvm_82575; - nvm->ops.release = igb_release_nvm_82575; - if (nvm->word_size < (1 << 15)) - nvm->ops.read = igb_read_nvm_eerd; - else - nvm->ops.read = igb_read_nvm_spi; - nvm->ops.write = igb_write_nvm_spi; + case E1000_DEV_ID_I210_COPPER: + case E1000_DEV_ID_I210_FIBER: + case E1000_DEV_ID_I210_SERDES: + case E1000_DEV_ID_I210_SGMII: + case E1000_DEV_ID_I210_COPPER_FLASHLESS: + case E1000_DEV_ID_I210_SERDES_FLASHLESS: + mac->type = e1000_i210; break; - } - - /* if part supports SR-IOV then initialize mailbox parameters */ - switch (mac->type) { - case e1000_82576: - case e1000_i350: - igb_init_mbx_params_pf(hw); + case E1000_DEV_ID_I211_COPPER: + mac->type = e1000_i211; + break; + case E1000_DEV_ID_I354_BACKPLANE_1GBPS: + case E1000_DEV_ID_I354_SGMII: + case E1000_DEV_ID_I354_BACKPLANE_2_5GBPS: + mac->type = e1000_i354; break; default: + return -E1000_ERR_MAC_INIT; break; } - /* setup PHY parameters */ - if (phy->media_type != e1000_media_type_copper) { - phy->type = e1000_phy_none; - return 0; - } - - phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; - phy->reset_delay_us = 100; + /* Set media type */ + /* The 82575 uses bits 22:23 for link mode. The mode can be changed + * based on the EEPROM. We cannot rely upon device ID. There + * is no distinguishable difference between fiber and internal + * SerDes mode on the 82575. There can be an external PHY attached + * on the SGMII interface. For this, we'll set sgmii_active to true. + */ + hw->phy.media_type = e1000_media_type_copper; + dev_spec->sgmii_active = false; + dev_spec->module_plugged = false; ctrl_ext = rd32(E1000_CTRL_EXT); - /* PHY function pointers */ - if (igb_sgmii_active_82575(hw)) { - phy->ops.reset = igb_phy_hw_reset_sgmii_82575; - ctrl_ext |= E1000_CTRL_I2C_ENA; - } else { - phy->ops.reset = igb_phy_hw_reset; - ctrl_ext &= ~E1000_CTRL_I2C_ENA; - } - - wr32(E1000_CTRL_EXT, ctrl_ext); - igb_reset_mdicnfg_82580(hw); + link_mode = ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK; + switch (link_mode) { + case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX: + hw->phy.media_type = e1000_media_type_internal_serdes; + break; + case E1000_CTRL_EXT_LINK_MODE_SGMII: + /* Get phy control interface type set (MDIO vs. I2C)*/ + if (igb_sgmii_uses_mdio_82575(hw)) { + hw->phy.media_type = e1000_media_type_copper; + dev_spec->sgmii_active = true; + break; + } + /* fall through for I2C based SGMII */ + case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES: + /* read media type from SFP EEPROM */ + ret_val = igb_set_sfp_media_type_82575(hw); + if ((ret_val != 0) || + (hw->phy.media_type == e1000_media_type_unknown)) { + /* If media type was not identified then return media + * type defined by the CTRL_EXT settings. + */ + hw->phy.media_type = e1000_media_type_internal_serdes; - if (igb_sgmii_active_82575(hw) && !igb_sgmii_uses_mdio_82575(hw)) { - phy->ops.read_reg = igb_read_phy_reg_sgmii_82575; - phy->ops.write_reg = igb_write_phy_reg_sgmii_82575; - } else if ((hw->mac.type == e1000_82580) - || (hw->mac.type == e1000_i350)) { - phy->ops.read_reg = igb_read_phy_reg_82580; - phy->ops.write_reg = igb_write_phy_reg_82580; - } else if (hw->phy.type >= e1000_phy_i210) { - phy->ops.read_reg = igb_read_phy_reg_gs40g; - phy->ops.write_reg = igb_write_phy_reg_gs40g; - } else { - phy->ops.read_reg = igb_read_phy_reg_igp; - phy->ops.write_reg = igb_write_phy_reg_igp; - } + if (link_mode == E1000_CTRL_EXT_LINK_MODE_SGMII) { + hw->phy.media_type = e1000_media_type_copper; + dev_spec->sgmii_active = true; + } - /* set lan id */ - hw->bus.func = (rd32(E1000_STATUS) & E1000_STATUS_FUNC_MASK) >> - E1000_STATUS_FUNC_SHIFT; + break; + } - /* Set phy->phy_addr and phy->id. */ - ret_val = igb_get_phy_id_82575(hw); - if (ret_val) - return ret_val; + /* do not change link mode for 100BaseFX */ + if (dev_spec->eth_flags.e100_base_fx) + break; - /* Verify phy id and set remaining function pointers */ - switch (phy->id) { - case I347AT4_E_PHY_ID: - case M88E1112_E_PHY_ID: - case M88E1111_I_PHY_ID: - phy->type = e1000_phy_m88; - phy->ops.get_phy_info = igb_get_phy_info_m88; + /* change current link mode setting */ + ctrl_ext &= ~E1000_CTRL_EXT_LINK_MODE_MASK; - if (phy->id == I347AT4_E_PHY_ID || - phy->id == M88E1112_E_PHY_ID) - phy->ops.get_cable_length = igb_get_cable_length_m88_gen2; + if (hw->phy.media_type == e1000_media_type_copper) + ctrl_ext |= E1000_CTRL_EXT_LINK_MODE_SGMII; else - phy->ops.get_cable_length = igb_get_cable_length_m88; + ctrl_ext |= E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES; + + wr32(E1000_CTRL_EXT, ctrl_ext); - if (phy->id == I210_I_PHY_ID) { - phy->ops.get_cable_length = - igb_get_cable_length_m88_gen2; - phy->ops.set_d0_lplu_state = - igb_set_d0_lplu_state_82580; - phy->ops.set_d3_lplu_state = - igb_set_d3_lplu_state_82580; - } - phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88; break; - case IGP03E1000_E_PHY_ID: - phy->type = e1000_phy_igp_3; - phy->ops.get_phy_info = igb_get_phy_info_igp; - phy->ops.get_cable_length = igb_get_cable_length_igp_2; - phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_igp; - phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82575; - phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state; + default: break; - case I82580_I_PHY_ID: - case I350_I_PHY_ID: - phy->type = e1000_phy_82580; - phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_82580; - phy->ops.get_cable_length = igb_get_cable_length_82580; - phy->ops.get_phy_info = igb_get_phy_info_82580; - phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82580; - phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state_82580; + } + + /* mac initialization and operations */ + ret_val = igb_init_mac_params_82575(hw); + if (ret_val) + goto out; + + /* NVM initialization */ + ret_val = igb_init_nvm_params_82575(hw); + switch (hw->mac.type) { + case e1000_i210: + case e1000_i211: + ret_val = igb_init_nvm_params_i210(hw); break; - case I210_I_PHY_ID: - phy->type = e1000_phy_i210; - phy->ops.get_phy_info = igb_get_phy_info_m88; - phy->ops.check_polarity = igb_check_polarity_m88; - phy->ops.get_cable_length = igb_get_cable_length_m88_gen2; - phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82580; - phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state_82580; - phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88; + default: + break; + } + + if (ret_val) + goto out; + + /* if part supports SR-IOV then initialize mailbox parameters */ + switch (mac->type) { + case e1000_82576: + case e1000_i350: + igb_init_mbx_params_pf(hw); break; default: - return -E1000_ERR_PHY; + break; } - return 0; + /* setup PHY parameters */ + ret_val = igb_init_phy_params_82575(hw); + +out: + return ret_val; } /** @@ -577,8 +801,11 @@ static s32 igb_get_phy_id_82575(struct e1000_hw *hw) u32 ctrl_ext; u32 mdic; - /* - * For SGMII PHYs, we try the list of possible addresses until + /* Extra read required for some PHY's on i354 */ + if (hw->mac.type == e1000_i354) + igb_get_phy_id(hw); + + /* For SGMII PHYs, we try the list of possible addresses until * we find one that works. For non-SGMII PHYs * (e.g. integrated copper PHYs), an address of 1 should * work. The result of this function should mean phy->phy_addr @@ -600,6 +827,7 @@ static s32 igb_get_phy_id_82575(struct e1000_hw *hw) break; case e1000_82580: case e1000_i350: + case e1000_i354: case e1000_i210: case e1000_i211: mdic = rd32(E1000_MDICNFG); @@ -621,8 +849,7 @@ static s32 igb_get_phy_id_82575(struct e1000_hw *hw) wrfl(); msleep(300); - /* - * The address field in the I2CCMD register is 3 bits and 0 is invalid. + /* The address field in the I2CCMD register is 3 bits and 0 is invalid. * Therefore, we need to test 1-7 */ for (phy->addr = 1; phy->addr < 8; phy->addr++) { @@ -630,8 +857,7 @@ static s32 igb_get_phy_id_82575(struct e1000_hw *hw) if (ret_val == 0) { hw_dbg("Vendor ID 0x%08X read at address %u\n", phy_id, phy->addr); - /* - * At the time of this writing, The M88 part is + /* At the time of this writing, The M88 part is * the only supported SGMII PHY product. */ if (phy_id == M88_VENDOR) @@ -667,15 +893,13 @@ static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *hw) { s32 ret_val; - /* - * This isn't a true "hard" reset, but is the only reset + /* This isn't a true "hard" reset, but is the only reset * available to us at this time. */ hw_dbg("Soft resetting SGMII attached PHY...\n"); - /* - * SFP documentation requires the following to configure the SPF module + /* SFP documentation requires the following to configure the SPF module * to work on SGMII. No further documentation is given. */ ret_val = hw->phy.ops.write_reg(hw, 0x1B, 0x8084); @@ -730,8 +954,7 @@ static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *hw, bool active) data &= ~IGP02E1000_PM_D0_LPLU; ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT, data); - /* - * LPLU and SmartSpeed are mutually exclusive. LPLU is used + /* LPLU and SmartSpeed are mutually exclusive. LPLU is used * during Dx states where the power conservation is most * important. During driver activity we should enable * SmartSpeed, so performance is maintained. @@ -781,7 +1004,6 @@ out: static s32 igb_set_d0_lplu_state_82580(struct e1000_hw *hw, bool active) { struct e1000_phy_info *phy = &hw->phy; - s32 ret_val = 0; u16 data; data = rd32(E1000_82580_PHY_POWER_MGMT); @@ -794,8 +1016,7 @@ static s32 igb_set_d0_lplu_state_82580(struct e1000_hw *hw, bool active) } else { data &= ~E1000_82580_PM_D0_LPLU; - /* - * LPLU and SmartSpeed are mutually exclusive. LPLU is used + /* LPLU and SmartSpeed are mutually exclusive. LPLU is used * during Dx states where the power conservation is most * important. During driver activity we should enable * SmartSpeed, so performance is maintained. @@ -806,7 +1027,7 @@ static s32 igb_set_d0_lplu_state_82580(struct e1000_hw *hw, bool active) data &= ~E1000_82580_PM_SPD; } wr32(E1000_82580_PHY_POWER_MGMT, data); - return ret_val; + return 0; } /** @@ -823,18 +1044,16 @@ static s32 igb_set_d0_lplu_state_82580(struct e1000_hw *hw, bool active) * During driver activity, SmartSpeed should be enabled so performance is * maintained. **/ -s32 igb_set_d3_lplu_state_82580(struct e1000_hw *hw, bool active) +static s32 igb_set_d3_lplu_state_82580(struct e1000_hw *hw, bool active) { struct e1000_phy_info *phy = &hw->phy; - s32 ret_val = 0; u16 data; data = rd32(E1000_82580_PHY_POWER_MGMT); if (!active) { data &= ~E1000_82580_PM_D3_LPLU; - /* - * LPLU and SmartSpeed are mutually exclusive. LPLU is used + /* LPLU and SmartSpeed are mutually exclusive. LPLU is used * during Dx states where the power conservation is most * important. During driver activity we should enable * SmartSpeed, so performance is maintained. @@ -852,7 +1071,7 @@ s32 igb_set_d3_lplu_state_82580(struct e1000_hw *hw, bool active) } wr32(E1000_82580_PHY_POWER_MGMT, data); - return ret_val; + return 0; } /** @@ -920,8 +1139,7 @@ static s32 igb_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask) if (!(swfw_sync & (fwmask | swmask))) break; - /* - * Firmware currently using resource (fwmask) + /* Firmware currently using resource (fwmask) * or other software thread using resource (swmask) */ igb_put_hw_semaphore(hw); @@ -956,8 +1174,8 @@ static void igb_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask) { u32 swfw_sync; - while (igb_get_hw_semaphore(hw) != 0); - /* Empty */ + while (igb_get_hw_semaphore(hw) != 0) + ; /* Empty */ swfw_sync = rd32(E1000_SW_FW_SYNC); swfw_sync &= ~mask; @@ -979,7 +1197,6 @@ static void igb_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask) static s32 igb_get_cfg_done_82575(struct e1000_hw *hw) { s32 timeout = PHY_CFG_TIMEOUT; - s32 ret_val = 0; u32 mask = E1000_NVM_CFG_DONE_PORT_0; if (hw->bus.func == 1) @@ -992,7 +1209,7 @@ static s32 igb_get_cfg_done_82575(struct e1000_hw *hw) while (timeout) { if (rd32(E1000_EEMNGCTL) & mask) break; - msleep(1); + usleep_range(1000, 2000); timeout--; } if (!timeout) @@ -1003,6 +1220,31 @@ static s32 igb_get_cfg_done_82575(struct e1000_hw *hw) (hw->phy.type == e1000_phy_igp_3)) igb_phy_init_script_igp3(hw); + return 0; +} + +/** + * igb_get_link_up_info_82575 - Get link speed/duplex info + * @hw: pointer to the HW structure + * @speed: stores the current speed + * @duplex: stores the current duplex + * + * This is a wrapper function, if using the serial gigabit media independent + * interface, use PCS to retrieve the link speed and duplex information. + * Otherwise, use the generic function to get the link speed and duplex info. + **/ +static s32 igb_get_link_up_info_82575(struct e1000_hw *hw, u16 *speed, + u16 *duplex) +{ + s32 ret_val; + + if (hw->phy.media_type != e1000_media_type_copper) + ret_val = igb_get_pcs_speed_and_duplex_82575(hw, speed, + duplex); + else + ret_val = igb_get_speed_and_duplex_copper(hw, speed, + duplex); + return ret_val; } @@ -1020,13 +1262,21 @@ static s32 igb_check_for_link_82575(struct e1000_hw *hw) if (hw->phy.media_type != e1000_media_type_copper) { ret_val = igb_get_pcs_speed_and_duplex_82575(hw, &speed, - &duplex); - /* - * Use this flag to determine if link needs to be checked or + &duplex); + /* Use this flag to determine if link needs to be checked or * not. If we have link clear the flag so that we do not * continue to check for link. */ hw->mac.get_link_status = !hw->mac.serdes_has_link; + + /* Configure Flow Control now that Auto-Neg has completed. + * First, we need to restore the desired flow control + * settings because we may have had to re-autoneg with a + * different link partner. + */ + ret_val = igb_config_fc_after_link_up(hw); + if (ret_val) + hw_dbg("Error configuring flow control\n"); } else { ret_val = igb_check_for_copper_link(hw); } @@ -1059,7 +1309,7 @@ void igb_power_up_serdes_link_82575(struct e1000_hw *hw) /* flush the write to verify completion */ wrfl(); - msleep(1); + usleep_range(1000, 2000); } /** @@ -1075,22 +1325,20 @@ static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, u16 *speed, u16 *duplex) { struct e1000_mac_info *mac = &hw->mac; - u32 pcs; + u32 pcs, status; /* Set up defaults for the return values of this function */ mac->serdes_has_link = false; *speed = 0; *duplex = 0; - /* - * Read the PCS Status register for link state. For non-copper mode, + /* Read the PCS Status register for link state. For non-copper mode, * the status register is not accurate. The PCS status register is * used instead. */ pcs = rd32(E1000_PCS_LSTAT); - /* - * The link up bit determines when link is up on autoneg. The sync ok + /* The link up bit determines when link is up on autoneg. The sync ok * gets set once both sides sync up and agree upon link. Stable link * can be determined by checking for both link up and link sync ok */ @@ -1098,20 +1346,31 @@ static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, u16 *speed, mac->serdes_has_link = true; /* Detect and store PCS speed */ - if (pcs & E1000_PCS_LSTS_SPEED_1000) { + if (pcs & E1000_PCS_LSTS_SPEED_1000) *speed = SPEED_1000; - } else if (pcs & E1000_PCS_LSTS_SPEED_100) { + else if (pcs & E1000_PCS_LSTS_SPEED_100) *speed = SPEED_100; - } else { + else *speed = SPEED_10; - } /* Detect and store PCS duplex */ - if (pcs & E1000_PCS_LSTS_DUPLEX_FULL) { + if (pcs & E1000_PCS_LSTS_DUPLEX_FULL) *duplex = FULL_DUPLEX; - } else { + else *duplex = HALF_DUPLEX; + + /* Check if it is an I354 2.5Gb backplane connection. */ + if (mac->type == e1000_i354) { + status = rd32(E1000_STATUS); + if ((status & E1000_STATUS_2P5_SKU) && + !(status & E1000_STATUS_2P5_SKU_OVER)) { + *speed = SPEED_2500; + *duplex = FULL_DUPLEX; + hw_dbg("2500 Mbs, "); + hw_dbg("Full Duplex\n"); + } } + } return 0; @@ -1145,7 +1404,7 @@ void igb_shutdown_serdes_link_82575(struct e1000_hw *hw) /* flush the write to verify completion */ wrfl(); - msleep(1); + usleep_range(1000, 2000); } } @@ -1158,11 +1417,10 @@ void igb_shutdown_serdes_link_82575(struct e1000_hw *hw) **/ static s32 igb_reset_hw_82575(struct e1000_hw *hw) { - u32 ctrl, icr; + u32 ctrl; s32 ret_val; - /* - * Prevent the PCI-E bus from sticking if there is no TLP connection + /* Prevent the PCI-E bus from sticking if there is no TLP connection * on the last TLP read/write transaction when MAC is reset. */ ret_val = igb_disable_pcie_master(hw); @@ -1171,9 +1429,8 @@ static s32 igb_reset_hw_82575(struct e1000_hw *hw) /* set the completion timeout for interface */ ret_val = igb_set_pcie_completion_timeout(hw); - if (ret_val) { + if (ret_val) hw_dbg("PCI-E Set completion timeout has failed.\n"); - } hw_dbg("Masking off all interrupts\n"); wr32(E1000_IMC, 0xffffffff); @@ -1182,7 +1439,7 @@ static s32 igb_reset_hw_82575(struct e1000_hw *hw) wr32(E1000_TCTL, E1000_TCTL_PSP); wrfl(); - msleep(10); + usleep_range(10000, 20000); ctrl = rd32(E1000_CTRL); @@ -1191,8 +1448,7 @@ static s32 igb_reset_hw_82575(struct e1000_hw *hw) ret_val = igb_get_auto_rd_done(hw); if (ret_val) { - /* - * When auto config read does not complete, do not + /* When auto config read does not complete, do not * return with an error. This can happen in situations * where there is no eeprom and prevents getting link. */ @@ -1205,7 +1461,7 @@ static s32 igb_reset_hw_82575(struct e1000_hw *hw) /* Clear any pending interrupt events. */ wr32(E1000_IMC, 0xffffffff); - icr = rd32(E1000_ICR); + rd32(E1000_ICR); /* Install any alternate MAC address into RAR0 */ ret_val = igb_check_alt_mac_addr(hw); @@ -1225,6 +1481,13 @@ static s32 igb_init_hw_82575(struct e1000_hw *hw) s32 ret_val; u16 i, rar_count = mac->rar_entry_count; + if ((hw->mac.type >= e1000_i210) && + !(igb_get_flash_presence_i210(hw))) { + ret_val = igb_pll_workaround_i210(hw); + if (ret_val) + return ret_val; + } + /* Initialize identification LED */ ret_val = igb_id_led_init(hw); if (ret_val) { @@ -1234,7 +1497,7 @@ static s32 igb_init_hw_82575(struct e1000_hw *hw) /* Disabling VLAN filtering */ hw_dbg("Initializing the IEEE VLAN\n"); - if (hw->mac.type == e1000_i350) + if ((hw->mac.type == e1000_i350) || (hw->mac.type == e1000_i354)) igb_clear_vfta_i350(hw); else igb_clear_vfta(hw); @@ -1255,8 +1518,7 @@ static s32 igb_init_hw_82575(struct e1000_hw *hw) /* Setup link and flow control */ ret_val = igb_setup_link(hw); - /* - * Clear all of the statistics registers (clear on read). It is + /* Clear all of the statistics registers (clear on read). It is * important that we do this after we have tried to establish link * because the symbol error count will increment wildly if there * is no link. @@ -1277,12 +1539,27 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw) { u32 ctrl; s32 ret_val; + u32 phpm_reg; ctrl = rd32(E1000_CTRL); ctrl |= E1000_CTRL_SLU; ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); wr32(E1000_CTRL, ctrl); + /* Clear Go Link Disconnect bit on supported devices */ + switch (hw->mac.type) { + case e1000_82580: + case e1000_i350: + case e1000_i210: + case e1000_i211: + phpm_reg = rd32(E1000_82580_PHY_POWER_MGMT); + phpm_reg &= ~E1000_82580_PM_GO_LINKD; + wr32(E1000_82580_PHY_POWER_MGMT, phpm_reg); + break; + default: + break; + } + ret_val = igb_setup_serdes_link_82575(hw); if (ret_val) goto out; @@ -1300,11 +1577,17 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw) switch (hw->phy.type) { case e1000_phy_i210: case e1000_phy_m88: - if (hw->phy.id == I347AT4_E_PHY_ID || - hw->phy.id == M88E1112_E_PHY_ID) + switch (hw->phy.id) { + case I347AT4_E_PHY_ID: + case M88E1112_E_PHY_ID: + case M88E1543_E_PHY_ID: + case I210_I_PHY_ID: ret_val = igb_copper_link_setup_m88_gen2(hw); - else + break; + default: ret_val = igb_copper_link_setup_m88(hw); + break; + } break; case e1000_phy_igp_3: ret_val = igb_copper_link_setup_igp(hw); @@ -1336,9 +1619,9 @@ out: **/ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw) { - u32 ctrl_ext, ctrl_reg, reg; + u32 ctrl_ext, ctrl_reg, reg, anadv_reg; bool pcs_autoneg; - s32 ret_val = E1000_SUCCESS; + s32 ret_val = 0; u16 data; if ((hw->phy.media_type != e1000_media_type_internal_serdes) && @@ -1346,17 +1629,17 @@ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw) return ret_val; - /* - * On the 82575, SerDes loopback mode persists until it is + /* On the 82575, SerDes loopback mode persists until it is * explicitly turned off or a power cycle is performed. A read to * the register does not indicate its status. Therefore, we ensure * loopback mode is disabled during initialization. */ wr32(E1000_SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK); - /* power on the sfp cage if present */ + /* power on the sfp cage if present and turn on I2C */ ctrl_ext = rd32(E1000_CTRL_EXT); ctrl_ext &= ~E1000_CTRL_EXT_SDP3_DATA; + ctrl_ext |= E1000_CTRL_I2C_ENA; wr32(E1000_CTRL_EXT, ctrl_ext); ctrl_reg = rd32(E1000_CTRL); @@ -1392,7 +1675,7 @@ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw) hw->mac.type == e1000_82576) { ret_val = hw->nvm.ops.read(hw, NVM_COMPAT, 1, &data); if (ret_val) { - printk(KERN_DEBUG "NVM Read Error\n\n"); + hw_dbg(KERN_DEBUG "NVM Read Error\n\n"); return ret_val; } @@ -1400,13 +1683,12 @@ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw) pcs_autoneg = false; } - /* - * non-SGMII modes only supports a speed of 1000/Full for the + /* non-SGMII modes only supports a speed of 1000/Full for the * link so it is best to just force the MAC and let the pcs * link either autoneg or be forced to 1000/Full */ ctrl_reg |= E1000_CTRL_SPD_1000 | E1000_CTRL_FRCSPD | - E1000_CTRL_FD | E1000_CTRL_FRCDPX; + E1000_CTRL_FD | E1000_CTRL_FRCDPX; /* set speed of 1000/Full if speed/duplex is forced */ reg |= E1000_PCS_LCTL_FSV_1000 | E1000_PCS_LCTL_FDV_FULL; @@ -1415,8 +1697,7 @@ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw) wr32(E1000_CTRL, ctrl_reg); - /* - * New SerDes mode allows for forcing speed or autonegotiating speed + /* New SerDes mode allows for forcing speed or autonegotiating speed * at 1gb. Autoneg should be default set by most drivers. This is the * mode that will be compatible with older link partners and switches. * However, both are supported by the hardware and some drivers/tools. @@ -1424,27 +1705,45 @@ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw) reg &= ~(E1000_PCS_LCTL_AN_ENABLE | E1000_PCS_LCTL_FLV_LINK_UP | E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK); - /* - * We force flow control to prevent the CTRL register values from being - * overwritten by the autonegotiated flow control values - */ - reg |= E1000_PCS_LCTL_FORCE_FCTRL; - if (pcs_autoneg) { /* Set PCS register for autoneg */ reg |= E1000_PCS_LCTL_AN_ENABLE | /* Enable Autoneg */ E1000_PCS_LCTL_AN_RESTART; /* Restart autoneg */ + + /* Disable force flow control for autoneg */ + reg &= ~E1000_PCS_LCTL_FORCE_FCTRL; + + /* Configure flow control advertisement for autoneg */ + anadv_reg = rd32(E1000_PCS_ANADV); + anadv_reg &= ~(E1000_TXCW_ASM_DIR | E1000_TXCW_PAUSE); + switch (hw->fc.requested_mode) { + case e1000_fc_full: + case e1000_fc_rx_pause: + anadv_reg |= E1000_TXCW_ASM_DIR; + anadv_reg |= E1000_TXCW_PAUSE; + break; + case e1000_fc_tx_pause: + anadv_reg |= E1000_TXCW_ASM_DIR; + break; + default: + break; + } + wr32(E1000_PCS_ANADV, anadv_reg); + hw_dbg("Configuring Autoneg:PCS_LCTL=0x%08X\n", reg); } else { /* Set PCS register for forced link */ reg |= E1000_PCS_LCTL_FSD; /* Force Speed */ + /* Force flow control for forced link */ + reg |= E1000_PCS_LCTL_FORCE_FCTRL; + hw_dbg("Configuring Forced Link:PCS_LCTL=0x%08X\n", reg); } wr32(E1000_PCS_LCTL, reg); - if (!igb_sgmii_active_82575(hw)) + if (!pcs_autoneg && !igb_sgmii_active_82575(hw)) igb_force_mac_fc(hw); return ret_val; @@ -1508,8 +1807,7 @@ static s32 igb_read_mac_addr_82575(struct e1000_hw *hw) { s32 ret_val = 0; - /* - * If there's an alternate MAC address place it in RAR0 + /* If there's an alternate MAC address place it in RAR0 * so that it will override the Si installed default perm * address. */ @@ -1626,7 +1924,7 @@ void igb_rx_fifo_flush_82575(struct e1000_hw *hw) } /* Poll all queues to verify they have shut down */ for (ms_wait = 0; ms_wait < 10; ms_wait++) { - msleep(1); + usleep_range(1000, 2000); rx_enabled = 0; for (i = 0; i < 4; i++) rx_enabled |= rd32(E1000_RXDCTL(i)); @@ -1654,7 +1952,7 @@ void igb_rx_fifo_flush_82575(struct e1000_hw *hw) wr32(E1000_RCTL, temp_rctl); wr32(E1000_RCTL, temp_rctl | E1000_RCTL_EN); wrfl(); - msleep(2); + usleep_range(2000, 3000); /* Enable RX queues that were previously enabled and restore our * previous state @@ -1693,8 +1991,7 @@ static s32 igb_set_pcie_completion_timeout(struct e1000_hw *hw) if (gcr & E1000_GCR_CMPL_TMOUT_MASK) goto out; - /* - * if capababilities version is type 1 we can write the + /* if capabilities version is type 1 we can write the * timeout of 10ms to 200ms through the GCR register */ if (!(gcr & E1000_GCR_CAP_VER2)) { @@ -1702,20 +1999,19 @@ static s32 igb_set_pcie_completion_timeout(struct e1000_hw *hw) goto out; } - /* - * for version 2 capabilities we need to write the config space + /* for version 2 capabilities we need to write the config space * directly in order to set the completion timeout value for * 16ms to 55ms */ ret_val = igb_read_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2, - &pcie_devctl2); + &pcie_devctl2); if (ret_val) goto out; pcie_devctl2 |= PCIE_DEVICE_CONTROL2_16ms; ret_val = igb_write_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2, - &pcie_devctl2); + &pcie_devctl2); out: /* disable completion timeout resend */ gcr &= ~E1000_GCR_CMPL_TMOUT_RESEND; @@ -1734,27 +2030,33 @@ out: **/ void igb_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf) { - u32 dtxswc; + u32 reg_val, reg_offset; switch (hw->mac.type) { case e1000_82576: + reg_offset = E1000_DTXSWC; + break; case e1000_i350: - dtxswc = rd32(E1000_DTXSWC); - if (enable) { - dtxswc |= (E1000_DTXSWC_MAC_SPOOF_MASK | - E1000_DTXSWC_VLAN_SPOOF_MASK); - /* The PF can spoof - it has to in order to - * support emulation mode NICs */ - dtxswc ^= (1 << pf | 1 << (pf + MAX_NUM_VFS)); - } else { - dtxswc &= ~(E1000_DTXSWC_MAC_SPOOF_MASK | - E1000_DTXSWC_VLAN_SPOOF_MASK); - } - wr32(E1000_DTXSWC, dtxswc); + case e1000_i354: + reg_offset = E1000_TXSWC; break; default: - break; + return; + } + + reg_val = rd32(reg_offset); + if (enable) { + reg_val |= (E1000_DTXSWC_MAC_SPOOF_MASK | + E1000_DTXSWC_VLAN_SPOOF_MASK); + /* The PF can spoof - it has to in order to + * support emulation mode NICs + */ + reg_val ^= (1 << pf | 1 << (pf + MAX_NUM_VFS)); + } else { + reg_val &= ~(E1000_DTXSWC_MAC_SPOOF_MASK | + E1000_DTXSWC_VLAN_SPOOF_MASK); } + wr32(reg_offset, reg_val); } /** @@ -1777,6 +2079,7 @@ void igb_vmdq_set_loopback_pf(struct e1000_hw *hw, bool enable) dtxswc &= ~E1000_DTXSWC_VMDQ_LOOPBACK_EN; wr32(E1000_DTXSWC, dtxswc); break; + case e1000_i354: case e1000_i350: dtxswc = rd32(E1000_TXSWC); if (enable) @@ -1790,7 +2093,6 @@ void igb_vmdq_set_loopback_pf(struct e1000_hw *hw, bool enable) break; } - } /** @@ -1825,7 +2127,6 @@ static s32 igb_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data) { s32 ret_val; - ret_val = hw->phy.ops.acquire(hw); if (ret_val) goto out; @@ -1912,17 +2213,21 @@ static s32 igb_reset_hw_82580(struct e1000_hw *hw) s32 ret_val = 0; /* BH SW mailbox bit in SW_FW_SYNC */ u16 swmbsw_mask = E1000_SW_SYNCH_MB; - u32 ctrl, icr; + u32 ctrl; bool global_device_reset = hw->dev_spec._82575.global_device_reset; - hw->dev_spec._82575.global_device_reset = false; + /* due to hw errata, global device reset doesn't always + * work on 82580 + */ + if (hw->mac.type == e1000_82580) + global_device_reset = false; + /* Get current control state. */ ctrl = rd32(E1000_CTRL); - /* - * Prevent the PCI-E bus from sticking if there is no TLP connection + /* Prevent the PCI-E bus from sticking if there is no TLP connection * on the last TLP read/write transaction when MAC is reset. */ ret_val = igb_disable_pcie_master(hw); @@ -1935,7 +2240,7 @@ static s32 igb_reset_hw_82580(struct e1000_hw *hw) wr32(E1000_TCTL, E1000_TCTL_PSP); wrfl(); - msleep(10); + usleep_range(10000, 11000); /* Determine whether or not a global dev reset is requested */ if (global_device_reset && @@ -1953,28 +2258,23 @@ static s32 igb_reset_hw_82580(struct e1000_hw *hw) /* Add delay to insure DEV_RST has time to complete */ if (global_device_reset) - msleep(5); + usleep_range(5000, 6000); ret_val = igb_get_auto_rd_done(hw); if (ret_val) { - /* - * When auto config read does not complete, do not + /* When auto config read does not complete, do not * return with an error. This can happen in situations * where there is no eeprom and prevents getting link. */ hw_dbg("Auto Read Done did not complete\n"); } - /* If EEPROM is not present, run manual init scripts */ - if ((rd32(E1000_EECD) & E1000_EECD_PRES) == 0) - igb_reset_init_script_82575(hw); - /* clear global device reset status bit */ wr32(E1000_STATUS, E1000_STAT_DEV_RST_SET); /* Clear any pending interrupt events. */ wr32(E1000_IMC, 0xffffffff); - icr = rd32(E1000_ICR); + rd32(E1000_ICR); ret_val = igb_reset_mdicnfg_82580(hw); if (ret_val) @@ -2004,7 +2304,7 @@ u16 igb_rxpbs_adjust_82580(u32 data) { u16 ret_val = 0; - if (data < E1000_82580_RXPBS_TABLE_SIZE) + if (data < ARRAY_SIZE(e1000_82580_rxpbs_table)) ret_val = e1000_82580_rxpbs_table[data]; return ret_val; @@ -2102,7 +2402,8 @@ static s32 igb_validate_nvm_checksum_82580(struct e1000_hw *hw) if (nvm_data & NVM_COMPATIBILITY_BIT_MASK) { /* if checksums compatibility bit is set validate checksums - * for all 4 ports. */ + * for all 4 ports. + */ eeprom_regions_count = 4; } @@ -2134,8 +2435,7 @@ static s32 igb_update_nvm_checksum_82580(struct e1000_hw *hw) ret_val = hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data); if (ret_val) { - hw_dbg("NVM Read Error while updating checksum" - " compatibility bit.\n"); + hw_dbg("NVM Read Error while updating checksum compatibility bit.\n"); goto out; } @@ -2145,8 +2445,7 @@ static s32 igb_update_nvm_checksum_82580(struct e1000_hw *hw) ret_val = hw->nvm.ops.write(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data); if (ret_val) { - hw_dbg("NVM Write Error while updating checksum" - " compatibility bit.\n"); + hw_dbg("NVM Write Error while updating checksum compatibility bit.\n"); goto out; } } @@ -2214,6 +2513,41 @@ out: } /** + * __igb_access_emi_reg - Read/write EMI register + * @hw: pointer to the HW structure + * @addr: EMI address to program + * @data: pointer to value to read/write from/to the EMI address + * @read: boolean flag to indicate read or write + **/ +static s32 __igb_access_emi_reg(struct e1000_hw *hw, u16 address, + u16 *data, bool read) +{ + s32 ret_val = 0; + + ret_val = hw->phy.ops.write_reg(hw, E1000_EMIADD, address); + if (ret_val) + return ret_val; + + if (read) + ret_val = hw->phy.ops.read_reg(hw, E1000_EMIDATA, data); + else + ret_val = hw->phy.ops.write_reg(hw, E1000_EMIDATA, *data); + + return ret_val; +} + +/** + * igb_read_emi_reg - Read Extended Management Interface register + * @hw: pointer to the HW structure + * @addr: EMI address to program + * @data: value to be read from the EMI address + **/ +s32 igb_read_emi_reg(struct e1000_hw *hw, u16 addr, u16 *data) +{ + return __igb_access_emi_reg(hw, addr, data, true); +} + +/** * igb_set_eee_i350 - Enable/disable EEE support * @hw: pointer to the HW structure * @@ -2222,7 +2556,6 @@ out: **/ s32 igb_set_eee_i350(struct e1000_hw *hw) { - s32 ret_val = 0; u32 ipcnfg, eeer; if ((hw->mac.type < e1000_i350) || @@ -2233,19 +2566,15 @@ s32 igb_set_eee_i350(struct e1000_hw *hw) /* enable or disable per user setting */ if (!(hw->dev_spec._82575.eee_disable)) { - ipcnfg |= (E1000_IPCNFG_EEE_1G_AN | - E1000_IPCNFG_EEE_100M_AN); - eeer |= (E1000_EEER_TX_LPI_EN | - E1000_EEER_RX_LPI_EN | + u32 eee_su = rd32(E1000_EEE_SU); + + ipcnfg |= (E1000_IPCNFG_EEE_1G_AN | E1000_IPCNFG_EEE_100M_AN); + eeer |= (E1000_EEER_TX_LPI_EN | E1000_EEER_RX_LPI_EN | E1000_EEER_LPI_FC); - /* keep the LPI clock running before EEE is enabled */ - if (hw->mac.type == e1000_i210 || hw->mac.type == e1000_i211) { - u32 eee_su; - eee_su = rd32(E1000_EEE_SU); - eee_su &= ~E1000_EEE_SU_LPI_CLK_STP; - wr32(E1000_EEE_SU, eee_su); - } + /* This bit should not be set in normal operation. */ + if (eee_su & E1000_EEE_SU_LPI_CLK_STP) + hw_dbg("LPI Clock Stop Bit should not be set!\n"); } else { ipcnfg &= ~(E1000_IPCNFG_EEE_1G_AN | @@ -2260,21 +2589,264 @@ s32 igb_set_eee_i350(struct e1000_hw *hw) rd32(E1000_EEER); out: + return 0; +} + +/** + * igb_set_eee_i354 - Enable/disable EEE support + * @hw: pointer to the HW structure + * + * Enable/disable EEE legacy mode based on setting in dev_spec structure. + * + **/ +s32 igb_set_eee_i354(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = 0; + u16 phy_data; + + if ((hw->phy.media_type != e1000_media_type_copper) || + (phy->id != M88E1543_E_PHY_ID)) + goto out; + + if (!hw->dev_spec._82575.eee_disable) { + /* Switch to PHY page 18. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 18); + if (ret_val) + goto out; + + ret_val = phy->ops.read_reg(hw, E1000_M88E1543_EEE_CTRL_1, + &phy_data); + if (ret_val) + goto out; + + phy_data |= E1000_M88E1543_EEE_CTRL_1_MS; + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_EEE_CTRL_1, + phy_data); + if (ret_val) + goto out; + + /* Return the PHY to page 0. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0); + if (ret_val) + goto out; + + /* Turn on EEE advertisement. */ + ret_val = igb_read_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354, + E1000_EEE_ADV_DEV_I354, + &phy_data); + if (ret_val) + goto out; + + phy_data |= E1000_EEE_ADV_100_SUPPORTED | + E1000_EEE_ADV_1000_SUPPORTED; + ret_val = igb_write_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354, + E1000_EEE_ADV_DEV_I354, + phy_data); + } else { + /* Turn off EEE advertisement. */ + ret_val = igb_read_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354, + E1000_EEE_ADV_DEV_I354, + &phy_data); + if (ret_val) + goto out; + + phy_data &= ~(E1000_EEE_ADV_100_SUPPORTED | + E1000_EEE_ADV_1000_SUPPORTED); + ret_val = igb_write_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354, + E1000_EEE_ADV_DEV_I354, + phy_data); + } + +out: + return ret_val; +} + +/** + * igb_get_eee_status_i354 - Get EEE status + * @hw: pointer to the HW structure + * @status: EEE status + * + * Get EEE status by guessing based on whether Tx or Rx LPI indications have + * been received. + **/ +s32 igb_get_eee_status_i354(struct e1000_hw *hw, bool *status) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = 0; + u16 phy_data; + + /* Check if EEE is supported on this device. */ + if ((hw->phy.media_type != e1000_media_type_copper) || + (phy->id != M88E1543_E_PHY_ID)) + goto out; + + ret_val = igb_read_xmdio_reg(hw, E1000_PCS_STATUS_ADDR_I354, + E1000_PCS_STATUS_DEV_I354, + &phy_data); + if (ret_val) + goto out; + + *status = phy_data & (E1000_PCS_STATUS_TX_LPI_RCVD | + E1000_PCS_STATUS_RX_LPI_RCVD) ? true : false; + +out: return ret_val; } +static const u8 e1000_emc_temp_data[4] = { + E1000_EMC_INTERNAL_DATA, + E1000_EMC_DIODE1_DATA, + E1000_EMC_DIODE2_DATA, + E1000_EMC_DIODE3_DATA +}; +static const u8 e1000_emc_therm_limit[4] = { + E1000_EMC_INTERNAL_THERM_LIMIT, + E1000_EMC_DIODE1_THERM_LIMIT, + E1000_EMC_DIODE2_THERM_LIMIT, + E1000_EMC_DIODE3_THERM_LIMIT +}; + +#ifdef CONFIG_IGB_HWMON +/** + * igb_get_thermal_sensor_data_generic - Gathers thermal sensor data + * @hw: pointer to hardware structure + * + * Updates the temperatures in mac.thermal_sensor_data + **/ +static s32 igb_get_thermal_sensor_data_generic(struct e1000_hw *hw) +{ + u16 ets_offset; + u16 ets_cfg; + u16 ets_sensor; + u8 num_sensors; + u8 sensor_index; + u8 sensor_location; + u8 i; + struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data; + + if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0)) + return E1000_NOT_IMPLEMENTED; + + data->sensor[0].temp = (rd32(E1000_THMJT) & 0xFF); + + /* Return the internal sensor only if ETS is unsupported */ + hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_offset); + if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF)) + return 0; + + hw->nvm.ops.read(hw, ets_offset, 1, &ets_cfg); + if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT) + != NVM_ETS_TYPE_EMC) + return E1000_NOT_IMPLEMENTED; + + num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK); + if (num_sensors > E1000_MAX_SENSORS) + num_sensors = E1000_MAX_SENSORS; + + for (i = 1; i < num_sensors; i++) { + hw->nvm.ops.read(hw, (ets_offset + i), 1, &ets_sensor); + sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >> + NVM_ETS_DATA_INDEX_SHIFT); + sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >> + NVM_ETS_DATA_LOC_SHIFT); + + if (sensor_location != 0) + hw->phy.ops.read_i2c_byte(hw, + e1000_emc_temp_data[sensor_index], + E1000_I2C_THERMAL_SENSOR_ADDR, + &data->sensor[i].temp); + } + return 0; +} + +/** + * igb_init_thermal_sensor_thresh_generic - Sets thermal sensor thresholds + * @hw: pointer to hardware structure + * + * Sets the thermal sensor thresholds according to the NVM map + * and save off the threshold and location values into mac.thermal_sensor_data + **/ +static s32 igb_init_thermal_sensor_thresh_generic(struct e1000_hw *hw) +{ + u16 ets_offset; + u16 ets_cfg; + u16 ets_sensor; + u8 low_thresh_delta; + u8 num_sensors; + u8 sensor_index; + u8 sensor_location; + u8 therm_limit; + u8 i; + struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data; + + if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0)) + return E1000_NOT_IMPLEMENTED; + + memset(data, 0, sizeof(struct e1000_thermal_sensor_data)); + + data->sensor[0].location = 0x1; + data->sensor[0].caution_thresh = + (rd32(E1000_THHIGHTC) & 0xFF); + data->sensor[0].max_op_thresh = + (rd32(E1000_THLOWTC) & 0xFF); + + /* Return the internal sensor only if ETS is unsupported */ + hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_offset); + if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF)) + return 0; + + hw->nvm.ops.read(hw, ets_offset, 1, &ets_cfg); + if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT) + != NVM_ETS_TYPE_EMC) + return E1000_NOT_IMPLEMENTED; + + low_thresh_delta = ((ets_cfg & NVM_ETS_LTHRES_DELTA_MASK) >> + NVM_ETS_LTHRES_DELTA_SHIFT); + num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK); + + for (i = 1; i <= num_sensors; i++) { + hw->nvm.ops.read(hw, (ets_offset + i), 1, &ets_sensor); + sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >> + NVM_ETS_DATA_INDEX_SHIFT); + sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >> + NVM_ETS_DATA_LOC_SHIFT); + therm_limit = ets_sensor & NVM_ETS_DATA_HTHRESH_MASK; + + hw->phy.ops.write_i2c_byte(hw, + e1000_emc_therm_limit[sensor_index], + E1000_I2C_THERMAL_SENSOR_ADDR, + therm_limit); + + if ((i < E1000_MAX_SENSORS) && (sensor_location != 0)) { + data->sensor[i].location = sensor_location; + data->sensor[i].caution_thresh = therm_limit; + data->sensor[i].max_op_thresh = therm_limit - + low_thresh_delta; + } + } + return 0; +} + +#endif static struct e1000_mac_operations e1000_mac_ops_82575 = { .init_hw = igb_init_hw_82575, .check_for_link = igb_check_for_link_82575, .rar_set = igb_rar_set, .read_mac_addr = igb_read_mac_addr_82575, - .get_speed_and_duplex = igb_get_speed_and_duplex_copper, + .get_speed_and_duplex = igb_get_link_up_info_82575, +#ifdef CONFIG_IGB_HWMON + .get_thermal_sensor_data = igb_get_thermal_sensor_data_generic, + .init_thermal_sensor_thresh = igb_init_thermal_sensor_thresh_generic, +#endif }; static struct e1000_phy_operations e1000_phy_ops_82575 = { .acquire = igb_acquire_phy_82575, .get_cfg_done = igb_get_cfg_done_82575, .release = igb_release_phy_82575, + .write_i2c_byte = igb_write_i2c_byte, + .read_i2c_byte = igb_read_i2c_byte, }; static struct e1000_nvm_operations e1000_nvm_ops_82575 = { |