diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e')
23 files changed, 1619 insertions, 1004 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c index 895450e9bb3..08f22f34880 100644 --- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c +++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c @@ -1,30 +1,23 @@ -/******************************************************************************* - - Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2013 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - Linux NICS <linux.nics@intel.com> - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +/* Intel PRO/1000 Linux driver + * Copyright(c) 1999 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * Linux NICS <linux.nics@intel.com> + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ /* 80003ES2LAN Gigabit Ethernet Controller (Copper) * 80003ES2LAN Gigabit Ethernet Controller (Serdes) @@ -718,8 +711,11 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw) e1000_release_phy_80003es2lan(hw); /* Disable IBIST slave mode (far-end loopback) */ - e1000_read_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_INBAND_PARAM, - &kum_reg_data); + ret_val = + e1000_read_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_INBAND_PARAM, + &kum_reg_data); + if (ret_val) + return ret_val; kum_reg_data |= E1000_KMRNCTRLSTA_IBIST_DISABLE; e1000_write_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_INBAND_PARAM, kum_reg_data); @@ -1369,6 +1365,7 @@ static const struct e1000_mac_operations es2_mac_ops = { .setup_led = e1000e_setup_led_generic, .config_collision_dist = e1000e_config_collision_dist_generic, .rar_set = e1000e_rar_set_generic, + .rar_get_count = e1000e_rar_get_count_generic, }; static const struct e1000_phy_operations es2_phy_ops = { diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.h b/drivers/net/ethernet/intel/e1000e/80003es2lan.h index 90d363b2d28..535a9430976 100644 --- a/drivers/net/ethernet/intel/e1000e/80003es2lan.h +++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.h @@ -1,30 +1,23 @@ -/******************************************************************************* - - Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2013 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - Linux NICS <linux.nics@intel.com> - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +/* Intel PRO/1000 Linux driver + * Copyright(c) 1999 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * Linux NICS <linux.nics@intel.com> + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ #ifndef _E1000E_80003ES2LAN_H_ #define _E1000E_80003ES2LAN_H_ diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c index 4c303e2a7cb..218481e509f 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.c +++ b/drivers/net/ethernet/intel/e1000e/82571.c @@ -1,30 +1,23 @@ -/******************************************************************************* - - Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2013 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - Linux NICS <linux.nics@intel.com> - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +/* Intel PRO/1000 Linux driver + * Copyright(c) 1999 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * Linux NICS <linux.nics@intel.com> + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ /* 82571EB Gigabit Ethernet Controller * 82571EB Gigabit Ethernet Controller (Copper) @@ -1011,6 +1004,11 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) /* Must release MDIO ownership and mutex after MAC reset. */ switch (hw->mac.type) { + case e1000_82573: + /* Release mutex only if the hw semaphore is acquired */ + if (!ret_val) + e1000_put_hw_semaphore_82573(hw); + break; case e1000_82574: case e1000_82583: /* Release mutex only if the hw semaphore is acquired */ @@ -1898,6 +1896,7 @@ static const struct e1000_mac_operations e82571_mac_ops = { .config_collision_dist = e1000e_config_collision_dist_generic, .read_mac_addr = e1000_read_mac_addr_82571, .rar_set = e1000e_rar_set_generic, + .rar_get_count = e1000e_rar_get_count_generic, }; static const struct e1000_phy_operations e82_phy_ops_igp = { @@ -2057,6 +2056,7 @@ const struct e1000_info e1000_82583_info = { | FLAG_HAS_JUMBO_FRAMES | FLAG_HAS_CTRLEXT_ON_LOAD, .flags2 = FLAG2_DISABLE_ASPM_L0S + | FLAG2_DISABLE_ASPM_L1 | FLAG2_NO_DISABLE_RX, .pba = 32, .max_hw_frame_size = DEFAULT_JUMBO, diff --git a/drivers/net/ethernet/intel/e1000e/82571.h b/drivers/net/ethernet/intel/e1000e/82571.h index 08e24dc3dc0..2e758f796d6 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.h +++ b/drivers/net/ethernet/intel/e1000e/82571.h @@ -1,30 +1,23 @@ -/******************************************************************************* - - Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2013 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - Linux NICS <linux.nics@intel.com> - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +/* Intel PRO/1000 Linux driver + * Copyright(c) 1999 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * Linux NICS <linux.nics@intel.com> + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ #ifndef _E1000E_82571_H_ #define _E1000E_82571_H_ diff --git a/drivers/net/ethernet/intel/e1000e/Makefile b/drivers/net/ethernet/intel/e1000e/Makefile index c2dcfcc1085..106de493373 100644 --- a/drivers/net/ethernet/intel/e1000e/Makefile +++ b/drivers/net/ethernet/intel/e1000e/Makefile @@ -1,7 +1,7 @@ ################################################################################ # # Intel PRO/1000 Linux driver -# Copyright(c) 1999 - 2013 Intel Corporation. +# Copyright(c) 1999 - 2014 Intel Corporation. # # This program is free software; you can redistribute it and/or modify it # under the terms and conditions of the GNU General Public License, @@ -12,9 +12,8 @@ # FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for # more details. # -# You should have received a copy of the GNU General Public License along with -# this program; if not, write to the Free Software Foundation, Inc., -# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. +# You should have received a copy of the GNU General Public License +# along with this program; if not, see <http://www.gnu.org/licenses/>. # # The full GNU General Public License is included in this distribution in # the file called "COPYING". diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h index 351c94a0cf7..d18e8921257 100644 --- a/drivers/net/ethernet/intel/e1000e/defines.h +++ b/drivers/net/ethernet/intel/e1000e/defines.h @@ -1,30 +1,23 @@ -/******************************************************************************* - - Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2013 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - Linux NICS <linux.nics@intel.com> - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +/* Intel PRO/1000 Linux driver + * Copyright(c) 1999 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * Linux NICS <linux.nics@intel.com> + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ #ifndef _E1000_DEFINES_H_ #define _E1000_DEFINES_H_ @@ -35,9 +28,11 @@ /* Definitions for power management and wakeup registers */ /* Wake Up Control */ -#define E1000_WUC_APME 0x00000001 /* APM Enable */ -#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */ -#define E1000_WUC_PHY_WAKE 0x00000100 /* if PHY supports wakeup */ +#define E1000_WUC_APME 0x00000001 /* APM Enable */ +#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */ +#define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */ +#define E1000_WUC_APMPME 0x00000008 /* Assert PME on APM Wakeup */ +#define E1000_WUC_PHY_WAKE 0x00000100 /* if PHY supports wakeup */ /* Wake Up Filter Control */ #define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */ diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index ffbc08f56c4..7785240a0da 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -1,30 +1,23 @@ -/******************************************************************************* - - Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2013 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - Linux NICS <linux.nics@intel.com> - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +/* Intel PRO/1000 Linux driver + * Copyright(c) 1999 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * Linux NICS <linux.nics@intel.com> + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ /* Linux PRO/1000 Ethernet Driver main header file */ @@ -90,9 +83,6 @@ struct e1000_info; #define E1000_MNG_VLAN_NONE (-1) -/* Number of packet split data buffers (not including the header buffer) */ -#define PS_PAGE_BUFFERS (MAX_PS_BUFFERS - 1) - #define DEFAULT_JUMBO 9234 /* Time to wait before putting the device into D3 if there's no link (in ms). */ @@ -272,12 +262,13 @@ struct e1000_adapter { u32 tx_head_addr; u32 tx_fifo_size; u32 tx_dma_failed; + u32 tx_hwtstamp_timeouts; /* Rx */ - bool (*clean_rx) (struct e1000_ring *ring, int *work_done, - int work_to_do) ____cacheline_aligned_in_smp; - void (*alloc_rx_buf) (struct e1000_ring *ring, int cleaned_count, - gfp_t gfp); + bool (*clean_rx)(struct e1000_ring *ring, int *work_done, + int work_to_do) ____cacheline_aligned_in_smp; + void (*alloc_rx_buf)(struct e1000_ring *ring, int cleaned_count, + gfp_t gfp); struct e1000_ring *rx_ring; u32 rx_int_delay; @@ -336,7 +327,6 @@ struct e1000_adapter { struct work_struct update_phy_task; struct work_struct print_hang_task; - bool idle_check; int phy_hang_count; u16 tx_ring_count; @@ -345,6 +335,7 @@ struct e1000_adapter { struct hwtstamp_config hwtstamp_config; struct delayed_work systim_overflow_work; struct sk_buff *tx_hwtstamp_skb; + unsigned long tx_hwtstamp_start; struct work_struct tx_hwtstamp_work; spinlock_t systim_lock; /* protects SYSTIML/H regsters */ struct cyclecounter cc; @@ -400,6 +391,8 @@ s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca); * 25MHz 46-bit 2^46 / 10^9 / 3600 = 19.55 hours */ #define E1000_SYSTIM_OVERFLOW_PERIOD (HZ * 60 * 60 * 4) +#define E1000_MAX_82574_SYSTIM_REREADS 50 +#define E1000_82574_SYSTIM_EPSILON (1ULL << 35ULL) /* hardware capability, feature, and workaround flags */ #define FLAG_HAS_AMT (1 << 0) @@ -475,26 +468,25 @@ enum latency_range { extern char e1000e_driver_name[]; extern const char e1000e_driver_version[]; -extern void e1000e_check_options(struct e1000_adapter *adapter); -extern void e1000e_set_ethtool_ops(struct net_device *netdev); - -extern int e1000e_up(struct e1000_adapter *adapter); -extern void e1000e_down(struct e1000_adapter *adapter); -extern void e1000e_reinit_locked(struct e1000_adapter *adapter); -extern void e1000e_reset(struct e1000_adapter *adapter); -extern void e1000e_power_up_phy(struct e1000_adapter *adapter); -extern int e1000e_setup_rx_resources(struct e1000_ring *ring); -extern int e1000e_setup_tx_resources(struct e1000_ring *ring); -extern void e1000e_free_rx_resources(struct e1000_ring *ring); -extern void e1000e_free_tx_resources(struct e1000_ring *ring); -extern struct rtnl_link_stats64 *e1000e_get_stats64(struct net_device *netdev, - struct rtnl_link_stats64 - *stats); -extern void e1000e_set_interrupt_capability(struct e1000_adapter *adapter); -extern void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter); -extern void e1000e_get_hw_control(struct e1000_adapter *adapter); -extern void e1000e_release_hw_control(struct e1000_adapter *adapter); -extern void e1000e_write_itr(struct e1000_adapter *adapter, u32 itr); +void e1000e_check_options(struct e1000_adapter *adapter); +void e1000e_set_ethtool_ops(struct net_device *netdev); + +int e1000e_up(struct e1000_adapter *adapter); +void e1000e_down(struct e1000_adapter *adapter, bool reset); +void e1000e_reinit_locked(struct e1000_adapter *adapter); +void e1000e_reset(struct e1000_adapter *adapter); +void e1000e_power_up_phy(struct e1000_adapter *adapter); +int e1000e_setup_rx_resources(struct e1000_ring *ring); +int e1000e_setup_tx_resources(struct e1000_ring *ring); +void e1000e_free_rx_resources(struct e1000_ring *ring); +void e1000e_free_tx_resources(struct e1000_ring *ring); +struct rtnl_link_stats64 *e1000e_get_stats64(struct net_device *netdev, + struct rtnl_link_stats64 *stats); +void e1000e_set_interrupt_capability(struct e1000_adapter *adapter); +void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter); +void e1000e_get_hw_control(struct e1000_adapter *adapter); +void e1000e_release_hw_control(struct e1000_adapter *adapter); +void e1000e_write_itr(struct e1000_adapter *adapter, u32 itr); extern unsigned int copybreak; @@ -511,8 +503,8 @@ extern const struct e1000_info e1000_pch2_info; extern const struct e1000_info e1000_pch_lpt_info; extern const struct e1000_info e1000_es2_info; -extern void e1000e_ptp_init(struct e1000_adapter *adapter); -extern void e1000e_ptp_remove(struct e1000_adapter *adapter); +void e1000e_ptp_init(struct e1000_adapter *adapter); +void e1000e_ptp_remove(struct e1000_adapter *adapter); static inline s32 e1000_phy_hw_reset(struct e1000_hw *hw) { @@ -539,7 +531,7 @@ static inline s32 e1e_wphy_locked(struct e1000_hw *hw, u32 offset, u16 data) return hw->phy.ops.write_reg_locked(hw, offset, data); } -extern void e1000e_reload_nvm_generic(struct e1000_hw *hw); +void e1000e_reload_nvm_generic(struct e1000_hw *hw); static inline s32 e1000e_read_mac_addr(struct e1000_hw *hw) { @@ -583,35 +575,8 @@ static inline u32 __er32(struct e1000_hw *hw, unsigned long reg) #define er32(reg) __er32(hw, E1000_##reg) -/** - * __ew32_prepare - prepare to write to MAC CSR register on certain parts - * @hw: pointer to the HW structure - * - * When updating the MAC CSR registers, the Manageability Engine (ME) could - * be accessing the registers at the same time. Normally, this is handled in - * h/w by an arbiter but on some parts there is a bug that acknowledges Host - * accesses later than it should which could result in the register to have - * an incorrect value. Workaround this by checking the FWSM register which - * has bit 24 set while ME is accessing MAC CSR registers, wait if it is set - * and try again a number of times. - **/ -static inline s32 __ew32_prepare(struct e1000_hw *hw) -{ - s32 i = E1000_ICH_FWSM_PCIM2PCI_COUNT; - - while ((er32(FWSM) & E1000_ICH_FWSM_PCIM2PCI) && --i) - udelay(50); - - return i; -} - -static inline void __ew32(struct e1000_hw *hw, unsigned long reg, u32 val) -{ - if (hw->adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) - __ew32_prepare(hw); - - writel(val, hw->hw_addr + reg); -} +s32 __ew32_prepare(struct e1000_hw *hw); +void __ew32(struct e1000_hw *hw, unsigned long reg, u32 val); #define ew32(reg, val) __ew32(hw, E1000_##reg, (val)) diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index 59c22bf1870..815e26c6d34 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -1,30 +1,23 @@ -/******************************************************************************* - - Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2013 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - Linux NICS <linux.nics@intel.com> - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +/* Intel PRO/1000 Linux driver + * Copyright(c) 1999 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * Linux NICS <linux.nics@intel.com> + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ /* ethtool support for e1000 */ @@ -111,6 +104,7 @@ static const struct e1000_stats e1000_gstrings_stats[] = { E1000_STAT("rx_hwtstamp_cleared", rx_hwtstamp_cleared), E1000_STAT("uncorr_ecc_errors", uncorr_errors), E1000_STAT("corr_ecc_errors", corr_errors), + E1000_STAT("tx_hwtstamp_timeouts", tx_hwtstamp_timeouts), }; #define E1000_GLOBAL_STATS_LEN ARRAY_SIZE(e1000_gstrings_stats) @@ -165,16 +159,17 @@ static int e1000_get_settings(struct net_device *netdev, ecmd->transceiver = XCVR_EXTERNAL; } - speed = -1; - ecmd->duplex = -1; + speed = SPEED_UNKNOWN; + ecmd->duplex = DUPLEX_UNKNOWN; if (netif_running(netdev)) { if (netif_carrier_ok(netdev)) { speed = adapter->link_speed; ecmd->duplex = adapter->link_duplex - 1; } - } else { + } else if (!pm_runtime_suspended(netdev->dev.parent)) { u32 status = er32(STATUS); + if (status & E1000_STATUS_LU) { if (status & E1000_STATUS_SPEED_1000) speed = SPEED_1000; @@ -264,6 +259,9 @@ static int e1000_set_settings(struct net_device *netdev, { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; + int ret_val = 0; + + pm_runtime_get_sync(netdev->dev.parent); /* When SoL/IDER sessions are active, autoneg/speed/duplex * cannot be changed @@ -271,7 +269,8 @@ static int e1000_set_settings(struct net_device *netdev, if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw)) { e_err("Cannot change link characteristics when SoL/IDER is active.\n"); - return -EINVAL; + ret_val = -EINVAL; + goto out; } /* MDI setting is only allowed when autoneg enabled because @@ -279,13 +278,16 @@ static int e1000_set_settings(struct net_device *netdev, * duplex is forced. */ if (ecmd->eth_tp_mdix_ctrl) { - if (hw->phy.media_type != e1000_media_type_copper) - return -EOPNOTSUPP; + if (hw->phy.media_type != e1000_media_type_copper) { + ret_val = -EOPNOTSUPP; + goto out; + } if ((ecmd->eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) && (ecmd->autoneg != AUTONEG_ENABLE)) { e_err("forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n"); - return -EINVAL; + ret_val = -EINVAL; + goto out; } } @@ -307,8 +309,8 @@ static int e1000_set_settings(struct net_device *netdev, u32 speed = ethtool_cmd_speed(ecmd); /* calling this overrides forced MDI setting */ if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) { - clear_bit(__E1000_RESETTING, &adapter->state); - return -EINVAL; + ret_val = -EINVAL; + goto out; } } @@ -325,14 +327,16 @@ static int e1000_set_settings(struct net_device *netdev, /* reset the link */ if (netif_running(adapter->netdev)) { - e1000e_down(adapter); + e1000e_down(adapter, true); e1000e_up(adapter); } else { e1000e_reset(adapter); } +out: + pm_runtime_put_sync(netdev->dev.parent); clear_bit(__E1000_RESETTING, &adapter->state); - return 0; + return ret_val; } static void e1000_get_pauseparam(struct net_device *netdev, @@ -366,10 +370,12 @@ static int e1000_set_pauseparam(struct net_device *netdev, while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) usleep_range(1000, 2000); + pm_runtime_get_sync(netdev->dev.parent); + if (adapter->fc_autoneg == AUTONEG_ENABLE) { hw->fc.requested_mode = e1000_fc_default; if (netif_running(adapter->netdev)) { - e1000e_down(adapter); + e1000e_down(adapter, true); e1000e_up(adapter); } else { e1000e_reset(adapter); @@ -398,6 +404,7 @@ static int e1000_set_pauseparam(struct net_device *netdev, } out: + pm_runtime_put_sync(netdev->dev.parent); clear_bit(__E1000_RESETTING, &adapter->state); return retval; } @@ -428,6 +435,8 @@ static void e1000_get_regs(struct net_device *netdev, u32 *regs_buff = p; u16 phy_data; + pm_runtime_get_sync(netdev->dev.parent); + memset(p, 0, E1000_REGS_LEN * sizeof(u32)); regs->version = (1 << 24) | (adapter->pdev->revision << 16) | @@ -472,6 +481,8 @@ static void e1000_get_regs(struct net_device *netdev, e1e_rphy(hw, MII_STAT1000, &phy_data); regs_buff[24] = (u32)phy_data; /* phy local receiver status */ regs_buff[25] = regs_buff[24]; /* phy remote receiver status */ + + pm_runtime_put_sync(netdev->dev.parent); } static int e1000_get_eeprom_len(struct net_device *netdev) @@ -504,6 +515,8 @@ static int e1000_get_eeprom(struct net_device *netdev, if (!eeprom_buff) return -ENOMEM; + pm_runtime_get_sync(netdev->dev.parent); + if (hw->nvm.type == e1000_nvm_eeprom_spi) { ret_val = e1000_read_nvm(hw, first_word, last_word - first_word + 1, @@ -517,6 +530,8 @@ static int e1000_get_eeprom(struct net_device *netdev, } } + pm_runtime_put_sync(netdev->dev.parent); + if (ret_val) { /* a read error occurred, throw away the result */ memset(eeprom_buff, 0xff, sizeof(u16) * @@ -566,6 +581,8 @@ static int e1000_set_eeprom(struct net_device *netdev, ptr = (void *)eeprom_buff; + pm_runtime_get_sync(netdev->dev.parent); + if (eeprom->offset & 1) { /* need read/modify/write of first changed EEPROM word */ /* only the second byte of the word is being modified */ @@ -606,6 +623,7 @@ static int e1000_set_eeprom(struct net_device *netdev, ret_val = e1000e_update_nvm_checksum(hw); out: + pm_runtime_put_sync(netdev->dev.parent); kfree(eeprom_buff); return ret_val; } @@ -701,7 +719,9 @@ static int e1000_set_ringparam(struct net_device *netdev, } } - e1000e_down(adapter); + pm_runtime_get_sync(netdev->dev.parent); + + e1000e_down(adapter, true); /* We can't just free everything and then setup again, because the * ISRs in MSI-X mode get passed pointers to the Tx and Rx ring @@ -739,6 +759,7 @@ err_setup_rx: e1000e_free_tx_resources(temp_tx); err_setup: e1000e_up(adapter); + pm_runtime_put_sync(netdev->dev.parent); free_temp: vfree(temp_tx); vfree(temp_rx); @@ -763,25 +784,26 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data, reg + (offset << 2), val, (test[pat] & write & mask)); *data = reg; - return 1; + return true; } } - return 0; + return false; } static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data, int reg, u32 mask, u32 write) { u32 val; + __ew32(&adapter->hw, reg, write & mask); val = __er32(&adapter->hw, reg); if ((write & mask) != (val & mask)) { e_err("set/check test failed (reg 0x%05X): got 0x%08X expected 0x%08X\n", reg, (val & mask), (write & mask)); *data = reg; - return 1; + return true; } - return 0; + return false; } #define REG_PATTERN_TEST_ARRAY(reg, offset, mask, write) \ @@ -896,9 +918,23 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) else mask &= ~(1 << 30); } + if (mac->type == e1000_pch2lan) { + /* SHRAH[0,1,2] different than previous */ + if (i == 1) + mask &= 0xFFF4FFFF; + /* SHRAH[3] different than SHRAH[0,1,2] */ + if (i == 4) + mask |= (1 << 30); + /* RAR[1-6] owned by management engine - skipping */ + if (i > 0) + i += 6; + } REG_PATTERN_TEST_ARRAY(E1000_RA, ((i << 1) + 1), mask, 0xFFFFFFFF); + /* reset index to actual value */ + if ((mac->type == e1000_pch2lan) && (i > 6)) + i -= 6; } for (i = 0; i < mac->mta_reg_count; i++) @@ -1639,7 +1675,7 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter) ret_val = 13; /* ret_val is the same as mis-compare */ break; } - if (jiffies >= (time + 20)) { + if (time_after(jiffies, time + 20)) { ret_val = 14; /* error code for time out error */ break; } @@ -1683,6 +1719,7 @@ static int e1000_link_test(struct e1000_adapter *adapter, u64 *data) *data = 0; if (hw->phy.media_type == e1000_media_type_internal_serdes) { int i = 0; + hw->mac.serdes_has_link = false; /* On some blade server designs, link establishment @@ -1732,6 +1769,8 @@ static void e1000_diag_test(struct net_device *netdev, u8 autoneg; bool if_running = netif_running(netdev); + pm_runtime_get_sync(netdev->dev.parent); + set_bit(__E1000_TESTING, &adapter->state); if (!if_running) { @@ -1817,6 +1856,8 @@ static void e1000_diag_test(struct net_device *netdev, } msleep_interruptible(4 * 1000); + + pm_runtime_put_sync(netdev->dev.parent); } static void e1000_get_wol(struct net_device *netdev, @@ -1891,6 +1932,8 @@ static int e1000_set_phys_id(struct net_device *netdev, switch (state) { case ETHTOOL_ID_ACTIVE: + pm_runtime_get_sync(netdev->dev.parent); + if (!hw->mac.ops.blink_led) return 2; /* cycle on/off twice per second */ @@ -1902,6 +1945,7 @@ static int e1000_set_phys_id(struct net_device *netdev, e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0); hw->mac.ops.led_off(hw); hw->mac.ops.cleanup_led(hw); + pm_runtime_put_sync(netdev->dev.parent); break; case ETHTOOL_ID_ON: @@ -1912,6 +1956,7 @@ static int e1000_set_phys_id(struct net_device *netdev, hw->mac.ops.led_off(hw); break; } + return 0; } @@ -1950,11 +1995,15 @@ static int e1000_set_coalesce(struct net_device *netdev, adapter->itr_setting = adapter->itr & ~3; } + pm_runtime_get_sync(netdev->dev.parent); + if (adapter->itr_setting != 0) e1000e_write_itr(adapter, adapter->itr); else e1000e_write_itr(adapter, 0); + pm_runtime_put_sync(netdev->dev.parent); + return 0; } @@ -1968,7 +2017,9 @@ static int e1000_nway_reset(struct net_device *netdev) if (!adapter->hw.mac.autoneg) return -EINVAL; + pm_runtime_get_sync(netdev->dev.parent); e1000e_reinit_locked(adapter); + pm_runtime_put_sync(netdev->dev.parent); return 0; } @@ -1982,7 +2033,12 @@ static void e1000_get_ethtool_stats(struct net_device *netdev, int i; char *p = NULL; + pm_runtime_get_sync(netdev->dev.parent); + e1000e_get_stats64(netdev, &net_stats); + + pm_runtime_put_sync(netdev->dev.parent); + for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) { switch (e1000_gstrings_stats[i].type) { case NETDEV_STATS: @@ -2033,7 +2089,11 @@ static int e1000_get_rxnfc(struct net_device *netdev, case ETHTOOL_GRXFH: { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - u32 mrqc = er32(MRQC); + u32 mrqc; + + pm_runtime_get_sync(netdev->dev.parent); + mrqc = er32(MRQC); + pm_runtime_put_sync(netdev->dev.parent); if (!(mrqc & E1000_MRQC_RSS_FIELD_MASK)) return 0; @@ -2096,9 +2156,13 @@ static int e1000e_get_eee(struct net_device *netdev, struct ethtool_eee *edata) return -EOPNOTSUPP; } + pm_runtime_get_sync(netdev->dev.parent); + ret_val = hw->phy.ops.acquire(hw); - if (ret_val) + if (ret_val) { + pm_runtime_put_sync(netdev->dev.parent); return -EBUSY; + } /* EEE Capability */ ret_val = e1000_read_emi_reg_locked(hw, cap_addr, &phy_data); @@ -2117,14 +2181,11 @@ static int e1000e_get_eee(struct net_device *netdev, struct ethtool_eee *edata) /* EEE PCS Status */ ret_val = e1000_read_emi_reg_locked(hw, pcs_stat_addr, &phy_data); + if (ret_val) + goto release; if (hw->phy.type == e1000_phy_82579) phy_data <<= 8; -release: - hw->phy.ops.release(hw); - if (ret_val) - return -ENODATA; - /* Result of the EEE auto negotiation - there is no register that * has the status of the EEE negotiation so do a best-guess based * on whether Tx or Rx LPI indications have been received. @@ -2136,7 +2197,14 @@ release: edata->tx_lpi_enabled = true; edata->tx_lpi_timer = er32(LPIC) >> E1000_LPIC_LPIET_SHIFT; - return 0; +release: + hw->phy.ops.release(hw); + if (ret_val) + ret_val = -ENODATA; + + pm_runtime_put_sync(netdev->dev.parent); + + return ret_val; } static int e1000e_set_eee(struct net_device *netdev, struct ethtool_eee *edata) @@ -2169,12 +2237,16 @@ static int e1000e_set_eee(struct net_device *netdev, struct ethtool_eee *edata) hw->dev_spec.ich8lan.eee_disable = !edata->eee_enabled; + pm_runtime_get_sync(netdev->dev.parent); + /* reset the link */ if (netif_running(netdev)) e1000e_reinit_locked(adapter); else e1000e_reset(adapter); + pm_runtime_put_sync(netdev->dev.parent); + return 0; } @@ -2212,19 +2284,7 @@ static int e1000e_get_ts_info(struct net_device *netdev, return 0; } -static int e1000e_ethtool_begin(struct net_device *netdev) -{ - return pm_runtime_get_sync(netdev->dev.parent); -} - -static void e1000e_ethtool_complete(struct net_device *netdev) -{ - pm_runtime_put_sync(netdev->dev.parent); -} - static const struct ethtool_ops e1000_ethtool_ops = { - .begin = e1000e_ethtool_begin, - .complete = e1000e_ethtool_complete, .get_settings = e1000_get_settings, .set_settings = e1000_set_settings, .get_drvinfo = e1000_get_drvinfo, @@ -2258,5 +2318,5 @@ static const struct ethtool_ops e1000_ethtool_ops = { void e1000e_set_ethtool_ops(struct net_device *netdev) { - SET_ETHTOOL_OPS(netdev, &e1000_ethtool_ops); + netdev->ethtool_ops = &e1000_ethtool_ops; } diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h index a6f903a9b77..72f5475c4b9 100644 --- a/drivers/net/ethernet/intel/e1000e/hw.h +++ b/drivers/net/ethernet/intel/e1000e/hw.h @@ -1,30 +1,23 @@ -/******************************************************************************* - - Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2013 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - Linux NICS <linux.nics@intel.com> - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +/* Intel PRO/1000 Linux driver + * Copyright(c) 1999 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * Linux NICS <linux.nics@intel.com> + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ #ifndef _E1000_HW_H_ #define _E1000_HW_H_ @@ -90,6 +83,10 @@ struct e1000_hw; #define E1000_DEV_ID_PCH_LPT_I217_V 0x153B #define E1000_DEV_ID_PCH_LPTLP_I218_LM 0x155A #define E1000_DEV_ID_PCH_LPTLP_I218_V 0x1559 +#define E1000_DEV_ID_PCH_I218_LM2 0x15A0 +#define E1000_DEV_ID_PCH_I218_V2 0x15A1 +#define E1000_DEV_ID_PCH_I218_LM3 0x15A2 /* Wildcat Point PCH */ +#define E1000_DEV_ID_PCH_I218_V3 0x15A3 /* Wildcat Point PCH */ #define E1000_REVISION_4 4 @@ -227,6 +224,10 @@ union e1000_rx_desc_extended { }; #define MAX_PS_BUFFERS 4 + +/* Number of packet split data buffers (not including the header buffer) */ +#define PS_PAGE_BUFFERS (MAX_PS_BUFFERS - 1) + /* Receive Descriptor - Packet Split */ union e1000_rx_desc_packet_split { struct { @@ -251,7 +252,8 @@ union e1000_rx_desc_packet_split { } middle; struct { __le16 header_status; - __le16 length[3]; /* length of buffers 1-3 */ + /* length of buffers 1-3 */ + __le16 length[PS_PAGE_BUFFERS]; } upper; __le64 reserved; } wb; /* writeback */ @@ -467,8 +469,9 @@ struct e1000_mac_operations { s32 (*setup_led)(struct e1000_hw *); void (*write_vfta)(struct e1000_hw *, u32, u32); void (*config_collision_dist)(struct e1000_hw *); - void (*rar_set)(struct e1000_hw *, u8 *, u32); + int (*rar_set)(struct e1000_hw *, u8 *, u32); s32 (*read_mac_addr)(struct e1000_hw *); + u32 (*rar_get_count)(struct e1000_hw *); }; /* When to use various PHY register access functions: @@ -646,12 +649,20 @@ struct e1000_shadow_ram { #define E1000_ICH8_SHADOW_RAM_WORDS 2048 +/* I218 PHY Ultra Low Power (ULP) states */ +enum e1000_ulp_state { + e1000_ulp_state_unknown, + e1000_ulp_state_off, + e1000_ulp_state_on, +}; + struct e1000_dev_spec_ich8lan { bool kmrn_lock_loss_workaround_enabled; struct e1000_shadow_ram shadow_ram[E1000_ICH8_SHADOW_RAM_WORDS]; bool nvm_k1_enabled; bool eee_disable; u16 eee_lp_ability; + enum e1000_ulp_state ulp_state; }; struct e1000_hw { diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 9dde390f7e7..8894ab8ed6b 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1,30 +1,23 @@ -/******************************************************************************* - - Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2013 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - Linux NICS <linux.nics@intel.com> - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +/* Intel PRO/1000 Linux driver + * Copyright(c) 1999 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * Linux NICS <linux.nics@intel.com> + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ /* 82562G 10/100 Network Connection * 82562G-2 10/100 Network Connection @@ -53,6 +46,14 @@ * 82578DC Gigabit Network Connection * 82579LM Gigabit Network Connection * 82579V Gigabit Network Connection + * Ethernet Connection I217-LM + * Ethernet Connection I217-V + * Ethernet Connection I218-V + * Ethernet Connection I218-LM + * Ethernet Connection (2) I218-LM + * Ethernet Connection (2) I218-V + * Ethernet Connection (3) I218-LM + * Ethernet Connection (3) I218-V */ #include "e1000.h" @@ -138,11 +139,14 @@ static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link); static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw); static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw); static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw); -static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index); -static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index); +static int e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index); +static int e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index); +static u32 e1000_rar_get_count_pch_lpt(struct e1000_hw *hw); static s32 e1000_k1_workaround_lv(struct e1000_hw *hw); static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate); +static s32 e1000_disable_ulp_lpt_lp(struct e1000_hw *hw, bool force); static s32 e1000_setup_copper_link_pch_lpt(struct e1000_hw *hw); +static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state); static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg) { @@ -183,8 +187,9 @@ static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw) { u16 phy_reg = 0; u32 phy_id = 0; - s32 ret_val; + s32 ret_val = 0; u16 retry_count; + u32 mac_reg = 0; for (retry_count = 0; retry_count < 2; retry_count++) { ret_val = e1e_rphy_locked(hw, MII_PHYSID1, &phy_reg); @@ -203,23 +208,81 @@ static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw) if (hw->phy.id) { if (hw->phy.id == phy_id) - return true; + goto out; } else if (phy_id) { hw->phy.id = phy_id; hw->phy.revision = (u32)(phy_reg & ~PHY_REVISION_MASK); - return true; + goto out; } /* In case the PHY needs to be in mdio slow mode, * set slow mode and try to get the PHY id again. */ - hw->phy.ops.release(hw); - ret_val = e1000_set_mdio_slow_mode_hv(hw); - if (!ret_val) - ret_val = e1000e_get_phy_id(hw); - hw->phy.ops.acquire(hw); + if (hw->mac.type < e1000_pch_lpt) { + hw->phy.ops.release(hw); + ret_val = e1000_set_mdio_slow_mode_hv(hw); + if (!ret_val) + ret_val = e1000e_get_phy_id(hw); + hw->phy.ops.acquire(hw); + } + + if (ret_val) + return false; +out: + if (hw->mac.type == e1000_pch_lpt) { + /* Unforce SMBus mode in PHY */ + e1e_rphy_locked(hw, CV_SMB_CTRL, &phy_reg); + phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS; + e1e_wphy_locked(hw, CV_SMB_CTRL, phy_reg); + + /* Unforce SMBus mode in MAC */ + mac_reg = er32(CTRL_EXT); + mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, mac_reg); + } - return !ret_val; + return true; +} + +/** + * e1000_toggle_lanphypc_pch_lpt - toggle the LANPHYPC pin value + * @hw: pointer to the HW structure + * + * Toggling the LANPHYPC pin value fully power-cycles the PHY and is + * used to reset the PHY to a quiescent state when necessary. + **/ +static void e1000_toggle_lanphypc_pch_lpt(struct e1000_hw *hw) +{ + u32 mac_reg; + + /* Set Phy Config Counter to 50msec */ + mac_reg = er32(FEXTNVM3); + mac_reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK; + mac_reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC; + ew32(FEXTNVM3, mac_reg); + + /* Toggle LANPHYPC Value bit */ + mac_reg = er32(CTRL); + mac_reg |= E1000_CTRL_LANPHYPC_OVERRIDE; + mac_reg &= ~E1000_CTRL_LANPHYPC_VALUE; + ew32(CTRL, mac_reg); + e1e_flush(); + usleep_range(10, 20); + mac_reg &= ~E1000_CTRL_LANPHYPC_OVERRIDE; + ew32(CTRL, mac_reg); + e1e_flush(); + + if (hw->mac.type < e1000_pch_lpt) { + msleep(50); + } else { + u16 count = 20; + + do { + usleep_range(5000, 10000); + } while (!(er32(CTRL_EXT) & E1000_CTRL_EXT_LPCD) && count--); + + msleep(30); + } } /** @@ -231,15 +294,21 @@ static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw) **/ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) { + struct e1000_adapter *adapter = hw->adapter; u32 mac_reg, fwsm = er32(FWSM); s32 ret_val; - u16 phy_reg; /* Gate automatic PHY configuration by hardware on managed and * non-managed 82579 and newer adapters. */ e1000_gate_hw_phy_config_ich8lan(hw, true); + /* It is not possible to be certain of the current state of ULP + * so forcibly disable it. + */ + hw->dev_spec.ich8lan.ulp_state = e1000_ulp_state_unknown; + e1000_disable_ulp_lpt_lp(hw, true); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) { e_dbg("Failed to initialize PHY flow\n"); @@ -262,22 +331,16 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS; ew32(CTRL_EXT, mac_reg); + /* Wait 50 milliseconds for MAC to finish any retries + * that it might be trying to perform from previous + * attempts to acknowledge any phy read requests. + */ + msleep(50); + /* fall-through */ case e1000_pch2lan: - if (e1000_phy_is_accessible_pchlan(hw)) { - if (hw->mac.type == e1000_pch_lpt) { - /* Unforce SMBus mode in PHY */ - e1e_rphy_locked(hw, CV_SMB_CTRL, &phy_reg); - phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS; - e1e_wphy_locked(hw, CV_SMB_CTRL, phy_reg); - - /* Unforce SMBus mode in MAC */ - mac_reg = er32(CTRL_EXT); - mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS; - ew32(CTRL_EXT, mac_reg); - } + if (e1000_phy_is_accessible_pchlan(hw)) break; - } /* fall-through */ case e1000_pchlan: @@ -287,44 +350,27 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) if (hw->phy.ops.check_reset_block(hw)) { e_dbg("Required LANPHYPC toggle blocked by ME\n"); + ret_val = -E1000_ERR_PHY; break; } - e_dbg("Toggling LANPHYPC\n"); - - /* Set Phy Config Counter to 50msec */ - mac_reg = er32(FEXTNVM3); - mac_reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK; - mac_reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC; - ew32(FEXTNVM3, mac_reg); + /* Toggle LANPHYPC Value bit */ + e1000_toggle_lanphypc_pch_lpt(hw); + if (hw->mac.type >= e1000_pch_lpt) { + if (e1000_phy_is_accessible_pchlan(hw)) + break; - if (hw->mac.type == e1000_pch_lpt) { /* Toggling LANPHYPC brings the PHY out of SMBus mode - * So ensure that the MAC is also out of SMBus mode + * so ensure that the MAC is also out of SMBus mode */ mac_reg = er32(CTRL_EXT); mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS; ew32(CTRL_EXT, mac_reg); - } - /* Toggle LANPHYPC Value bit */ - mac_reg = er32(CTRL); - mac_reg |= E1000_CTRL_LANPHYPC_OVERRIDE; - mac_reg &= ~E1000_CTRL_LANPHYPC_VALUE; - ew32(CTRL, mac_reg); - e1e_flush(); - usleep_range(10, 20); - mac_reg &= ~E1000_CTRL_LANPHYPC_OVERRIDE; - ew32(CTRL, mac_reg); - e1e_flush(); - if (hw->mac.type < e1000_pch_lpt) { - msleep(50); - } else { - u16 count = 20; - do { - usleep_range(5000, 10000); - } while (!(er32(CTRL_EXT) & - E1000_CTRL_EXT_LPCD) && count--); + if (e1000_phy_is_accessible_pchlan(hw)) + break; + + ret_val = -E1000_ERR_PHY; } break; default: @@ -332,13 +378,33 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) } hw->phy.ops.release(hw); + if (!ret_val) { - /* Reset the PHY before any access to it. Doing so, ensures - * that the PHY is in a known good state before we read/write - * PHY registers. The generic reset is sufficient here, - * because we haven't determined the PHY type yet. - */ - ret_val = e1000e_phy_hw_reset_generic(hw); + /* Check to see if able to reset PHY. Print error if not */ + if (hw->phy.ops.check_reset_block(hw)) { + e_err("Reset blocked by ME\n"); + goto out; + } + + /* Reset the PHY before any access to it. Doing so, ensures + * that the PHY is in a known good state before we read/write + * PHY registers. The generic reset is sufficient here, + * because we haven't determined the PHY type yet. + */ + ret_val = e1000e_phy_hw_reset_generic(hw); + if (ret_val) + goto out; + + /* On a successful reset, possibly need to wait for the PHY + * to quiesce to an accessible state before returning control + * to the calling function. If the PHY does not quiesce, then + * return E1000E_BLK_PHY_RESET, as this is the condition that + * the PHY is in. + */ + ret_val = hw->phy.ops.check_reset_block(hw); + if (ret_val) + e_err("ME blocked access to PHY after reset\n"); + } out: /* Ungate automatic PHY configuration on non-managed 82579 */ @@ -639,6 +705,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw) mac->ops.rar_set = e1000_rar_set_pch_lpt; mac->ops.setup_physical_interface = e1000_setup_copper_link_pch_lpt; + mac->ops.rar_get_count = e1000_rar_get_count_pch_lpt; } /* Enable PCS Lock-loss workaround for ICH8 */ @@ -707,8 +774,14 @@ s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data) * Enable/disable EEE based on setting in dev_spec structure, the duplex of * the link and the EEE capabilities of the link partner. The LPI Control * register bits will remain set only if/when link is up. + * + * EEE LPI must not be asserted earlier than one second after link is up. + * On 82579, EEE LPI should not be enabled until such time otherwise there + * can be link issues with some switches. Other devices can have EEE LPI + * enabled immediately upon link up since they have a timer in hardware which + * prevents LPI from being asserted too early. **/ -static s32 e1000_set_eee_pchlan(struct e1000_hw *hw) +s32 e1000_set_eee_pchlan(struct e1000_hw *hw) { struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; s32 ret_val; @@ -773,6 +846,17 @@ static s32 e1000_set_eee_pchlan(struct e1000_hw *hw) } } + if (hw->phy.type == e1000_phy_82579) { + ret_val = e1000_read_emi_reg_locked(hw, I82579_LPI_PLL_SHUT, + &data); + if (ret_val) + goto release; + + data &= ~I82579_LPI_100_PLL_SHUT; + ret_val = e1000_write_emi_reg_locked(hw, I82579_LPI_PLL_SHUT, + data); + } + /* R/Clr IEEE MMD 3.1 bits 11:10 - Tx/Rx LPI Received */ ret_val = e1000_read_emi_reg_locked(hw, pcs_status, &data); if (ret_val) @@ -793,29 +877,31 @@ release: * When K1 is enabled for 1Gbps, the MAC can miss 2 DMA completion indications * preventing further DMA write requests. Workaround the issue by disabling * the de-assertion of the clock request when in 1Gpbs mode. + * Also, set appropriate Tx re-transmission timeouts for 10 and 100Half link + * speeds in order to avoid Tx hangs. **/ static s32 e1000_k1_workaround_lpt_lp(struct e1000_hw *hw, bool link) { u32 fextnvm6 = er32(FEXTNVM6); + u32 status = er32(STATUS); s32 ret_val = 0; + u16 reg; - if (link && (er32(STATUS) & E1000_STATUS_SPEED_1000)) { - u16 kmrn_reg; - + if (link && (status & E1000_STATUS_SPEED_1000)) { ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; ret_val = e1000e_read_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG, - &kmrn_reg); + ®); if (ret_val) goto release; ret_val = e1000e_write_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG, - kmrn_reg & + reg & ~E1000_KMRNCTRLSTA_K1_ENABLE); if (ret_val) goto release; @@ -827,12 +913,45 @@ static s32 e1000_k1_workaround_lpt_lp(struct e1000_hw *hw, bool link) ret_val = e1000e_write_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG, - kmrn_reg); + reg); release: hw->phy.ops.release(hw); } else { /* clear FEXTNVM6 bit 8 on link down or 10/100 */ - ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK); + fextnvm6 &= ~E1000_FEXTNVM6_REQ_PLL_CLK; + + if (!link || ((status & E1000_STATUS_SPEED_100) && + (status & E1000_STATUS_FD))) + goto update_fextnvm6; + + ret_val = e1e_rphy(hw, I217_INBAND_CTRL, ®); + if (ret_val) + return ret_val; + + /* Clear link status transmit timeout */ + reg &= ~I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_MASK; + + if (status & E1000_STATUS_SPEED_100) { + /* Set inband Tx timeout to 5x10us for 100Half */ + reg |= 5 << I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_SHIFT; + + /* Do not extend the K1 entry latency for 100Half */ + fextnvm6 &= ~E1000_FEXTNVM6_ENABLE_K1_ENTRY_CONDITION; + } else { + /* Set inband Tx timeout to 50x10us for 10Full/Half */ + reg |= 50 << + I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_SHIFT; + + /* Extend the K1 entry latency for 10 Mbps */ + fextnvm6 |= E1000_FEXTNVM6_ENABLE_K1_ENTRY_CONDITION; + } + + ret_val = e1e_wphy(hw, I217_INBAND_CTRL, reg); + if (ret_val) + return ret_val; + +update_fextnvm6: + ew32(FEXTNVM6, fextnvm6); } return ret_val; @@ -927,6 +1046,253 @@ static s32 e1000_platform_pm_pch_lpt(struct e1000_hw *hw, bool link) } /** + * e1000_enable_ulp_lpt_lp - configure Ultra Low Power mode for LynxPoint-LP + * @hw: pointer to the HW structure + * @to_sx: boolean indicating a system power state transition to Sx + * + * When link is down, configure ULP mode to significantly reduce the power + * to the PHY. If on a Manageability Engine (ME) enabled system, tell the + * ME firmware to start the ULP configuration. If not on an ME enabled + * system, configure the ULP mode by software. + */ +s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx) +{ + u32 mac_reg; + s32 ret_val = 0; + u16 phy_reg; + + if ((hw->mac.type < e1000_pch_lpt) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_LM) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_V) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_LM2) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_V2) || + (hw->dev_spec.ich8lan.ulp_state == e1000_ulp_state_on)) + return 0; + + if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID) { + /* Request ME configure ULP mode in the PHY */ + mac_reg = er32(H2ME); + mac_reg |= E1000_H2ME_ULP | E1000_H2ME_ENFORCE_SETTINGS; + ew32(H2ME, mac_reg); + + goto out; + } + + if (!to_sx) { + int i = 0; + + /* Poll up to 5 seconds for Cable Disconnected indication */ + while (!(er32(FEXT) & E1000_FEXT_PHY_CABLE_DISCONNECTED)) { + /* Bail if link is re-acquired */ + if (er32(STATUS) & E1000_STATUS_LU) + return -E1000_ERR_PHY; + + if (i++ == 100) + break; + + msleep(50); + } + e_dbg("CABLE_DISCONNECTED %s set after %dmsec\n", + (er32(FEXT) & + E1000_FEXT_PHY_CABLE_DISCONNECTED) ? "" : "not", i * 50); + } + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + goto out; + + /* Force SMBus mode in PHY */ + ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg); + if (ret_val) + goto release; + phy_reg |= CV_SMB_CTRL_FORCE_SMBUS; + e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg); + + /* Force SMBus mode in MAC */ + mac_reg = er32(CTRL_EXT); + mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, mac_reg); + + /* Set Inband ULP Exit, Reset to SMBus mode and + * Disable SMBus Release on PERST# in PHY + */ + ret_val = e1000_read_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, &phy_reg); + if (ret_val) + goto release; + phy_reg |= (I218_ULP_CONFIG1_RESET_TO_SMBUS | + I218_ULP_CONFIG1_DISABLE_SMB_PERST); + if (to_sx) { + if (er32(WUFC) & E1000_WUFC_LNKC) + phy_reg |= I218_ULP_CONFIG1_WOL_HOST; + + phy_reg |= I218_ULP_CONFIG1_STICKY_ULP; + } else { + phy_reg |= I218_ULP_CONFIG1_INBAND_EXIT; + } + e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg); + + /* Set Disable SMBus Release on PERST# in MAC */ + mac_reg = er32(FEXTNVM7); + mac_reg |= E1000_FEXTNVM7_DISABLE_SMB_PERST; + ew32(FEXTNVM7, mac_reg); + + /* Commit ULP changes in PHY by starting auto ULP configuration */ + phy_reg |= I218_ULP_CONFIG1_START; + e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg); +release: + hw->phy.ops.release(hw); +out: + if (ret_val) + e_dbg("Error in ULP enable flow: %d\n", ret_val); + else + hw->dev_spec.ich8lan.ulp_state = e1000_ulp_state_on; + + return ret_val; +} + +/** + * e1000_disable_ulp_lpt_lp - unconfigure Ultra Low Power mode for LynxPoint-LP + * @hw: pointer to the HW structure + * @force: boolean indicating whether or not to force disabling ULP + * + * Un-configure ULP mode when link is up, the system is transitioned from + * Sx or the driver is unloaded. If on a Manageability Engine (ME) enabled + * system, poll for an indication from ME that ULP has been un-configured. + * If not on an ME enabled system, un-configure the ULP mode by software. + * + * During nominal operation, this function is called when link is acquired + * to disable ULP mode (force=false); otherwise, for example when unloading + * the driver or during Sx->S0 transitions, this is called with force=true + * to forcibly disable ULP. + */ +static s32 e1000_disable_ulp_lpt_lp(struct e1000_hw *hw, bool force) +{ + s32 ret_val = 0; + u32 mac_reg; + u16 phy_reg; + int i = 0; + + if ((hw->mac.type < e1000_pch_lpt) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_LM) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_V) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_LM2) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_V2) || + (hw->dev_spec.ich8lan.ulp_state == e1000_ulp_state_off)) + return 0; + + if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID) { + if (force) { + /* Request ME un-configure ULP mode in the PHY */ + mac_reg = er32(H2ME); + mac_reg &= ~E1000_H2ME_ULP; + mac_reg |= E1000_H2ME_ENFORCE_SETTINGS; + ew32(H2ME, mac_reg); + } + + /* Poll up to 100msec for ME to clear ULP_CFG_DONE */ + while (er32(FWSM) & E1000_FWSM_ULP_CFG_DONE) { + if (i++ == 10) { + ret_val = -E1000_ERR_PHY; + goto out; + } + + usleep_range(10000, 20000); + } + e_dbg("ULP_CONFIG_DONE cleared after %dmsec\n", i * 10); + + if (force) { + mac_reg = er32(H2ME); + mac_reg &= ~E1000_H2ME_ENFORCE_SETTINGS; + ew32(H2ME, mac_reg); + } else { + /* Clear H2ME.ULP after ME ULP configuration */ + mac_reg = er32(H2ME); + mac_reg &= ~E1000_H2ME_ULP; + ew32(H2ME, mac_reg); + } + + goto out; + } + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + goto out; + + if (force) + /* Toggle LANPHYPC Value bit */ + e1000_toggle_lanphypc_pch_lpt(hw); + + /* Unforce SMBus mode in PHY */ + ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg); + if (ret_val) { + /* The MAC might be in PCIe mode, so temporarily force to + * SMBus mode in order to access the PHY. + */ + mac_reg = er32(CTRL_EXT); + mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, mac_reg); + + msleep(50); + + ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, + &phy_reg); + if (ret_val) + goto release; + } + phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS; + e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg); + + /* Unforce SMBus mode in MAC */ + mac_reg = er32(CTRL_EXT); + mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, mac_reg); + + /* When ULP mode was previously entered, K1 was disabled by the + * hardware. Re-Enable K1 in the PHY when exiting ULP. + */ + ret_val = e1000_read_phy_reg_hv_locked(hw, HV_PM_CTRL, &phy_reg); + if (ret_val) + goto release; + phy_reg |= HV_PM_CTRL_K1_ENABLE; + e1000_write_phy_reg_hv_locked(hw, HV_PM_CTRL, phy_reg); + + /* Clear ULP enabled configuration */ + ret_val = e1000_read_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, &phy_reg); + if (ret_val) + goto release; + phy_reg &= ~(I218_ULP_CONFIG1_IND | + I218_ULP_CONFIG1_STICKY_ULP | + I218_ULP_CONFIG1_RESET_TO_SMBUS | + I218_ULP_CONFIG1_WOL_HOST | + I218_ULP_CONFIG1_INBAND_EXIT | + I218_ULP_CONFIG1_DISABLE_SMB_PERST); + e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg); + + /* Commit ULP changes by starting auto ULP configuration */ + phy_reg |= I218_ULP_CONFIG1_START; + e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg); + + /* Clear Disable SMBus Release on PERST# in MAC */ + mac_reg = er32(FEXTNVM7); + mac_reg &= ~E1000_FEXTNVM7_DISABLE_SMB_PERST; + ew32(FEXTNVM7, mac_reg); + +release: + hw->phy.ops.release(hw); + if (force) { + e1000_phy_hw_reset(hw); + msleep(50); + } +out: + if (ret_val) + e_dbg("Error in ULP disable flow: %d\n", ret_val); + else + hw->dev_spec.ich8lan.ulp_state = e1000_ulp_state_off; + + return ret_val; +} + +/** * e1000_check_for_copper_link_ich8lan - Check for link (Copper) * @hw: pointer to the HW structure * @@ -963,14 +1329,18 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) return ret_val; } - /* When connected at 10Mbps half-duplex, 82579 parts are excessively + /* When connected at 10Mbps half-duplex, some parts are excessively * aggressive resulting in many collisions. To avoid this, increase * the IPG and reduce Rx latency in the PHY. */ - if ((hw->mac.type == e1000_pch2lan) && link) { + if (((hw->mac.type == e1000_pch2lan) || + (hw->mac.type == e1000_pch_lpt)) && link) { u32 reg; + reg = er32(STATUS); if (!(reg & (E1000_STATUS_FD | E1000_STATUS_SPEED_MASK))) { + u16 emi_addr; + reg = er32(TIPG); reg &= ~E1000_TIPG_IPGT_MASK; reg |= 0xFF; @@ -981,8 +1351,12 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) if (ret_val) return ret_val; - ret_val = - e1000_write_emi_reg_locked(hw, I82579_RX_CONFIG, 0); + if (hw->mac.type == e1000_pch2lan) + emi_addr = I82579_RX_CONFIG; + else + emi_addr = I217_RX_CONFIG; + + ret_val = e1000_write_emi_reg_locked(hw, emi_addr, 0); hw->phy.ops.release(hw); @@ -993,7 +1367,9 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) /* Work-around I218 hang issue */ if ((hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_LM) || - (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_V)) { + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_V) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_LM3) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_V3)) { ret_val = e1000_k1_workaround_lpt_lp(hw, link); if (ret_val) return ret_val; @@ -1052,9 +1428,11 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) e1000e_check_downshift(hw); /* Enable/Disable EEE after link up */ - ret_val = e1000_set_eee_pchlan(hw); - if (ret_val) - return ret_val; + if (hw->phy.type > e1000_phy_82579) { + ret_val = e1000_set_eee_pchlan(hw); + if (ret_val) + return ret_val; + } /* If we are forcing speed/duplex, then we simply return since * we have already determined whether we have link or not. @@ -1259,9 +1637,9 @@ static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw) u32 fwsm; fwsm = er32(FWSM); - return ((fwsm & E1000_ICH_FWSM_FW_VALID) && + return (fwsm & E1000_ICH_FWSM_FW_VALID) && ((fwsm & E1000_FWSM_MODE_MASK) == - (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT))); + (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT)); } /** @@ -1292,7 +1670,7 @@ static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw) * contain the MAC address but RAR[1-6] are reserved for manageability (ME). * Use SHRA[0-3] in place of those reserved for ME. **/ -static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index) +static int e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index) { u32 rar_low, rar_high; @@ -1314,10 +1692,13 @@ static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index) e1e_flush(); ew32(RAH(index), rar_high); e1e_flush(); - return; + return 0; } - if (index < hw->mac.rar_entry_count) { + /* RAR[1-6] are owned by manageability. Skip those and program the + * next address into the SHRA register array. + */ + if (index < (u32)(hw->mac.rar_entry_count)) { s32 ret_val; ret_val = e1000_acquire_swflag_ich8lan(hw); @@ -1334,7 +1715,7 @@ static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index) /* verify the register updates */ if ((er32(SHRAL(index - 1)) == rar_low) && (er32(SHRAH(index - 1)) == rar_high)) - return; + return 0; e_dbg("SHRA[%d] might be locked by ME - FWSM=0x%8.8x\n", (index - 1), er32(FWSM)); @@ -1342,6 +1723,43 @@ static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index) out: e_dbg("Failed to write receive address at index %d\n", index); + return -E1000_ERR_CONFIG; +} + +/** + * e1000_rar_get_count_pch_lpt - Get the number of available SHRA + * @hw: pointer to the HW structure + * + * Get the number of available receive registers that the Host can + * program. SHRA[0-10] are the shared receive address registers + * that are shared between the Host and manageability engine (ME). + * ME can reserve any number of addresses and the host needs to be + * able to tell how many available registers it has access to. + **/ +static u32 e1000_rar_get_count_pch_lpt(struct e1000_hw *hw) +{ + u32 wlock_mac; + u32 num_entries; + + wlock_mac = er32(FWSM) & E1000_FWSM_WLOCK_MAC_MASK; + wlock_mac >>= E1000_FWSM_WLOCK_MAC_SHIFT; + + switch (wlock_mac) { + case 0: + /* All SHRA[0..10] and RAR[0] available */ + num_entries = hw->mac.rar_entry_count; + break; + case 1: + /* Only RAR[0] available */ + num_entries = 1; + break; + default: + /* SHRA[0..(wlock_mac - 1)] available + RAR[0] */ + num_entries = wlock_mac + 1; + break; + } + + return num_entries; } /** @@ -1355,7 +1773,7 @@ out: * contain the MAC address. SHRA[0-10] are the shared receive address * registers that are shared between the Host and manageability engine (ME). **/ -static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index) +static int e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index) { u32 rar_low, rar_high; u32 wlock_mac; @@ -1377,7 +1795,7 @@ static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index) e1e_flush(); ew32(RAH(index), rar_high); e1e_flush(); - return; + return 0; } /* The manageability engine (ME) can lock certain SHRAR registers that @@ -1409,12 +1827,13 @@ static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index) /* verify the register updates */ if ((er32(SHRAL_PCH_LPT(index - 1)) == rar_low) && (er32(SHRAH_PCH_LPT(index - 1)) == rar_high)) - return; + return 0; } } out: e_dbg("Failed to write receive address at index %d\n", index); + return -E1000_ERR_CONFIG; } /** @@ -1427,11 +1846,13 @@ out: **/ static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw) { - u32 fwsm; - - fwsm = er32(FWSM); + bool blocked = false; + int i = 0; - return (fwsm & E1000_ICH_FWSM_RSPCIPHY) ? 0 : E1000_BLK_PHY_RESET; + while ((blocked = !(er32(FWSM) & E1000_ICH_FWSM_RSPCIPHY)) && + (i++ < 10)) + usleep_range(10000, 20000); + return blocked ? E1000_BLK_PHY_RESET : 0; } /** @@ -1908,8 +2329,8 @@ void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw) if (ret_val) goto release; - /* Copy both RAL/H (rar_entry_count) and SHRAL/H (+4) to PHY */ - for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) { + /* Copy both RAL/H (rar_entry_count) and SHRAL/H to PHY */ + for (i = 0; i < (hw->mac.rar_entry_count); i++) { mac_reg = er32(RAL(i)); hw->phy.ops.write_reg_page(hw, BM_RAR_L(i), (u16)(mac_reg & 0xFFFF)); @@ -1953,10 +2374,10 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable) return ret_val; if (enable) { - /* Write Rx addresses (rar_entry_count for RAL/H, +4 for + /* Write Rx addresses (rar_entry_count for RAL/H, and * SHRAL/H) and initial CRC values to the MAC */ - for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) { + for (i = 0; i < hw->mac.rar_entry_count; i++) { u8 mac_addr[ETH_ALEN] = { 0 }; u32 addr_high, addr_low; @@ -2133,51 +2554,44 @@ release: * e1000_k1_gig_workaround_lv - K1 Si workaround * @hw: pointer to the HW structure * - * Workaround to set the K1 beacon duration for 82579 parts + * Workaround to set the K1 beacon duration for 82579 parts in 10Mbps + * Disable K1 in 1000Mbps and 100Mbps **/ static s32 e1000_k1_workaround_lv(struct e1000_hw *hw) { s32 ret_val = 0; u16 status_reg = 0; - u32 mac_reg; - u16 phy_reg; if (hw->mac.type != e1000_pch2lan) return 0; - /* Set K1 beacon duration based on 1Gbps speed or otherwise */ + /* Set K1 beacon duration based on 10Mbs speed */ ret_val = e1e_rphy(hw, HV_M_STATUS, &status_reg); if (ret_val) return ret_val; if ((status_reg & (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE)) == (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE)) { - mac_reg = er32(FEXTNVM4); - mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK; - - ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg); - if (ret_val) - return ret_val; - - if (status_reg & HV_M_STATUS_SPEED_1000) { + if (status_reg & + (HV_M_STATUS_SPEED_1000 | HV_M_STATUS_SPEED_100)) { u16 pm_phy_reg; - mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_8USEC; - phy_reg &= ~I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT; - /* LV 1G Packet drop issue wa */ + /* LV 1G/100 Packet drop issue wa */ ret_val = e1e_rphy(hw, HV_PM_CTRL, &pm_phy_reg); if (ret_val) return ret_val; - pm_phy_reg &= ~HV_PM_CTRL_PLL_STOP_IN_K1_GIGA; + pm_phy_reg &= ~HV_PM_CTRL_K1_ENABLE; ret_val = e1e_wphy(hw, HV_PM_CTRL, pm_phy_reg); if (ret_val) return ret_val; } else { + u32 mac_reg; + + mac_reg = er32(FEXTNVM4); + mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK; mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_16USEC; - phy_reg |= I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT; + ew32(FEXTNVM4, mac_reg); } - ew32(FEXTNVM4, mac_reg); - ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg); } return ret_val; @@ -4168,7 +4582,9 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) u16 phy_reg, device_id = hw->adapter->pdev->device; if ((device_id == E1000_DEV_ID_PCH_LPTLP_I218_LM) || - (device_id == E1000_DEV_ID_PCH_LPTLP_I218_V)) { + (device_id == E1000_DEV_ID_PCH_LPTLP_I218_V) || + (device_id == E1000_DEV_ID_PCH_I218_LM3) || + (device_id == E1000_DEV_ID_PCH_I218_V3)) { u32 fextnvm6 = er32(FEXTNVM6); ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK); @@ -4601,6 +5017,7 @@ static const struct e1000_mac_operations ich8_mac_ops = { /* id_led_init dependent on mac type */ .config_collision_dist = e1000e_config_collision_dist_generic, .rar_set = e1000e_rar_set_generic, + .rar_get_count = e1000e_rar_get_count_generic, }; static const struct e1000_phy_operations ich8_phy_ops = { diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h index 80034a2b297..5515126c81c 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.h +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h @@ -1,30 +1,23 @@ -/******************************************************************************* - - Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2013 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - Linux NICS <linux.nics@intel.com> - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +/* Intel PRO/1000 Linux driver + * Copyright(c) 1999 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * Linux NICS <linux.nics@intel.com> + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ #ifndef _E1000E_ICH8LAN_H_ #define _E1000E_ICH8LAN_H_ @@ -65,11 +58,16 @@ #define E1000_FWSM_WLOCK_MAC_MASK 0x0380 #define E1000_FWSM_WLOCK_MAC_SHIFT 7 +#define E1000_FWSM_ULP_CFG_DONE 0x00000400 /* Low power cfg done */ /* Shared Receive Address Registers */ #define E1000_SHRAL_PCH_LPT(_i) (0x05408 + ((_i) * 8)) #define E1000_SHRAH_PCH_LPT(_i) (0x0540C + ((_i) * 8)) +#define E1000_H2ME 0x05B50 /* Host to ME */ +#define E1000_H2ME_ULP 0x00000800 /* ULP Indication Bit */ +#define E1000_H2ME_ENFORCE_SETTINGS 0x00001000 /* Enforce Settings */ + #define ID_LED_DEFAULT_ICH8LAN ((ID_LED_DEF1_DEF2 << 12) | \ (ID_LED_OFF1_OFF2 << 8) | \ (ID_LED_OFF1_ON2 << 4) | \ @@ -82,6 +80,9 @@ #define E1000_ICH8_LAN_INIT_TIMEOUT 1500 +/* FEXT register bit definition */ +#define E1000_FEXT_PHY_CABLE_DISCONNECTED 0x00000004 + #define E1000_FEXTNVM_SW_CONFIG 1 #define E1000_FEXTNVM_SW_CONFIG_ICH8M (1 << 27) /* different on ICH8M */ @@ -93,6 +94,9 @@ #define E1000_FEXTNVM4_BEACON_DURATION_16USEC 0x3 #define E1000_FEXTNVM6_REQ_PLL_CLK 0x00000100 +#define E1000_FEXTNVM6_ENABLE_K1_ENTRY_CONDITION 0x00000200 + +#define E1000_FEXTNVM7_DISABLE_SMB_PERST 0x00000020 #define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL @@ -160,6 +164,16 @@ #define CV_SMB_CTRL PHY_REG(769, 23) #define CV_SMB_CTRL_FORCE_SMBUS 0x0001 +/* I218 Ultra Low Power Configuration 1 Register */ +#define I218_ULP_CONFIG1 PHY_REG(779, 16) +#define I218_ULP_CONFIG1_START 0x0001 /* Start auto ULP config */ +#define I218_ULP_CONFIG1_IND 0x0004 /* Pwr up from ULP indication */ +#define I218_ULP_CONFIG1_STICKY_ULP 0x0010 /* Set sticky ULP mode */ +#define I218_ULP_CONFIG1_INBAND_EXIT 0x0020 /* Inband on ULP exit */ +#define I218_ULP_CONFIG1_WOL_HOST 0x0040 /* WoL Host on ULP exit */ +#define I218_ULP_CONFIG1_RESET_TO_SMBUS 0x0100 /* Reset to SMBus mode */ +#define I218_ULP_CONFIG1_DISABLE_SMB_PERST 0x1000 /* Disable on PERST# */ + /* SMBus Address Phy Register */ #define HV_SMB_ADDR PHY_REG(768, 26) #define HV_SMB_ADDR_MASK 0x007F @@ -194,9 +208,15 @@ /* PHY Power Management Control */ #define HV_PM_CTRL PHY_REG(770, 17) #define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA 0x100 +#define HV_PM_CTRL_K1_ENABLE 0x4000 #define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in ms */ +/* Inband Control */ +#define I217_INBAND_CTRL PHY_REG(770, 18) +#define I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_MASK 0x3F00 +#define I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_SHIFT 8 + /* PHY Low Power Idle Control */ #define I82579_LPI_CTRL PHY_REG(772, 20) #define I82579_LPI_CTRL_100_ENABLE 0x2000 @@ -212,16 +232,19 @@ #define I82577_MSE_THRESHOLD 0x0887 /* 82577 Mean Square Error Threshold */ #define I82579_MSE_LINK_DOWN 0x2411 /* MSE count before dropping link */ #define I82579_RX_CONFIG 0x3412 /* Receive configuration */ +#define I82579_LPI_PLL_SHUT 0x4412 /* LPI PLL Shut Enable */ #define I82579_EEE_PCS_STATUS 0x182E /* IEEE MMD Register 3.1 >> 8 */ #define I82579_EEE_CAPABILITY 0x0410 /* IEEE MMD Register 3.20 */ #define I82579_EEE_ADVERTISEMENT 0x040E /* IEEE MMD Register 7.60 */ #define I82579_EEE_LP_ABILITY 0x040F /* IEEE MMD Register 7.61 */ #define I82579_EEE_100_SUPPORTED (1 << 1) /* 100BaseTx EEE */ #define I82579_EEE_1000_SUPPORTED (1 << 2) /* 1000BaseTx EEE */ +#define I82579_LPI_100_PLL_SHUT (1 << 2) /* 100M LPI PLL Shut Enabled */ #define I217_EEE_PCS_STATUS 0x9401 /* IEEE MMD Register 3.1 */ #define I217_EEE_CAPABILITY 0x8000 /* IEEE MMD Register 3.20 */ #define I217_EEE_ADVERTISEMENT 0x8001 /* IEEE MMD Register 7.60 */ #define I217_EEE_LP_ABILITY 0x8002 /* IEEE MMD Register 7.61 */ +#define I217_RX_CONFIG 0xB20C /* Receive configuration */ #define E1000_EEE_RX_LPI_RCVD 0x0400 /* Tx LP idle received */ #define E1000_EEE_TX_LPI_RCVD 0x0800 /* Rx LP idle received */ @@ -262,4 +285,6 @@ void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw); s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable); s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data); s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data); +s32 e1000_set_eee_pchlan(struct e1000_hw *hw); +s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx); #endif /* _E1000E_ICH8LAN_H_ */ diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c index 2480c109187..8c386f3a15e 100644 --- a/drivers/net/ethernet/intel/e1000e/mac.c +++ b/drivers/net/ethernet/intel/e1000e/mac.c @@ -1,30 +1,23 @@ -/******************************************************************************* - - Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2013 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - Linux NICS <linux.nics@intel.com> - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +/* Intel PRO/1000 Linux driver + * Copyright(c) 1999 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * Linux NICS <linux.nics@intel.com> + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ #include "e1000.h" @@ -218,6 +211,11 @@ s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw) return 0; } +u32 e1000e_rar_get_count_generic(struct e1000_hw *hw) +{ + return hw->mac.rar_entry_count; +} + /** * e1000e_rar_set_generic - Set receive address register * @hw: pointer to the HW structure @@ -227,7 +225,7 @@ s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw) * Sets the receive address array register at index to the address passed * in by addr. **/ -void e1000e_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index) +int e1000e_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index) { u32 rar_low, rar_high; @@ -251,6 +249,8 @@ void e1000e_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index) e1e_flush(); ew32(RAH(index), rar_high); e1e_flush(); + + return 0; } /** diff --git a/drivers/net/ethernet/intel/e1000e/mac.h b/drivers/net/ethernet/intel/e1000e/mac.h index a61fee404eb..0513d90cdee 100644 --- a/drivers/net/ethernet/intel/e1000e/mac.h +++ b/drivers/net/ethernet/intel/e1000e/mac.h @@ -1,30 +1,23 @@ -/******************************************************************************* - - Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2013 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - Linux NICS <linux.nics@intel.com> - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +/* Intel PRO/1000 Linux driver + * Copyright(c) 1999 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * Linux NICS <linux.nics@intel.com> + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ #ifndef _E1000E_MAC_H_ #define _E1000E_MAC_H_ @@ -68,7 +61,8 @@ void e1000e_update_adaptive(struct e1000_hw *hw); void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value); void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw); -void e1000e_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index); +u32 e1000e_rar_get_count_generic(struct e1000_hw *hw); +int e1000e_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index); void e1000e_config_collision_dist_generic(struct e1000_hw *hw); #endif diff --git a/drivers/net/ethernet/intel/e1000e/manage.c b/drivers/net/ethernet/intel/e1000e/manage.c index e4b0f1ef92f..cb37ff1f132 100644 --- a/drivers/net/ethernet/intel/e1000e/manage.c +++ b/drivers/net/ethernet/intel/e1000e/manage.c @@ -1,30 +1,23 @@ -/******************************************************************************* - - Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2013 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - Linux NICS <linux.nics@intel.com> - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +/* Intel PRO/1000 Linux driver + * Copyright(c) 1999 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * Linux NICS <linux.nics@intel.com> + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ #include "e1000.h" diff --git a/drivers/net/ethernet/intel/e1000e/manage.h b/drivers/net/ethernet/intel/e1000e/manage.h index 326897c29ea..a8c27f98f7b 100644 --- a/drivers/net/ethernet/intel/e1000e/manage.h +++ b/drivers/net/ethernet/intel/e1000e/manage.h @@ -1,30 +1,23 @@ -/******************************************************************************* - - Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2013 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - Linux NICS <linux.nics@intel.com> - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +/* Intel PRO/1000 Linux driver + * Copyright(c) 1999 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * Linux NICS <linux.nics@intel.com> + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ #ifndef _E1000E_MANAGE_H_ #define _E1000E_MANAGE_H_ diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 77f81cbb601..201cc93f362 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -1,30 +1,23 @@ -/******************************************************************************* - - Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2013 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - Linux NICS <linux.nics@intel.com> - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +/* Intel PRO/1000 Linux driver + * Copyright(c) 1999 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * Linux NICS <linux.nics@intel.com> + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt @@ -64,8 +57,6 @@ static int debug = -1; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); -static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state); - static const struct e1000_info *e1000_info_tbl[] = { [board_82571] = &e1000_82571_info, [board_82572] = &e1000_82572_info, @@ -133,6 +124,36 @@ static const struct e1000_reg_info e1000_reg_info_tbl[] = { }; /** + * __ew32_prepare - prepare to write to MAC CSR register on certain parts + * @hw: pointer to the HW structure + * + * When updating the MAC CSR registers, the Manageability Engine (ME) could + * be accessing the registers at the same time. Normally, this is handled in + * h/w by an arbiter but on some parts there is a bug that acknowledges Host + * accesses later than it should which could result in the register to have + * an incorrect value. Workaround this by checking the FWSM register which + * has bit 24 set while ME is accessing MAC CSR registers, wait if it is set + * and try again a number of times. + **/ +s32 __ew32_prepare(struct e1000_hw *hw) +{ + s32 i = E1000_ICH_FWSM_PCIM2PCI_COUNT; + + while ((er32(FWSM) & E1000_ICH_FWSM_PCIM2PCI) && --i) + udelay(50); + + return i; +} + +void __ew32(struct e1000_hw *hw, unsigned long reg, u32 val) +{ + if (hw->adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) + __ew32_prepare(hw); + + writel(val, hw->hw_addr + reg); +} + +/** * e1000_regdump - register printout routine * @hw: pointer to the HW structure * @reginfo: pointer to the register info table @@ -608,6 +629,7 @@ static void e1000e_update_rdt_wa(struct e1000_ring *rx_ring, unsigned int i) if (unlikely(!ret_val && (i != readl(rx_ring->tail)))) { u32 rctl = er32(RCTL); + ew32(RCTL, rctl & ~E1000_RCTL_EN); e_err("ME firmware caused invalid RDT - resetting\n"); schedule_work(&adapter->reset_task); @@ -624,6 +646,7 @@ static void e1000e_update_tdt_wa(struct e1000_ring *tx_ring, unsigned int i) if (unlikely(!ret_val && (i != readl(tx_ring->tail)))) { u32 tctl = er32(TCTL); + ew32(TCTL, tctl & ~E1000_TCTL_EN); e_err("ME firmware caused invalid TDT - resetting\n"); schedule_work(&adapter->reset_task); @@ -887,7 +910,7 @@ static inline void e1000_rx_hash(struct net_device *netdev, __le32 rss, struct sk_buff *skb) { if (netdev->features & NETIF_F_RXHASH) - skb->rxhash = le32_to_cpu(rss); + skb_set_hash(skb, le32_to_cpu(rss), PKT_HASH_TYPE_L3); } /** @@ -1099,8 +1122,14 @@ static void e1000_print_hw_hang(struct work_struct *work) adapter->tx_hang_recheck = true; return; } - /* Real hang detected */ adapter->tx_hang_recheck = false; + + if (er32(TDH(0)) == er32(TDT(0))) { + e_dbg("false hang detected, ignoring\n"); + return; + } + + /* Real hang detected */ netif_stop_queue(netdev); e1e_rphy(hw, MII_BMSR, &phy_status); @@ -1130,6 +1159,8 @@ static void e1000_print_hw_hang(struct work_struct *work) eop, jiffies, eop_desc->upper.fields.status, er32(STATUS), phy_status, phy_1000t_status, phy_ext_status, pci_status); + e1000e_dump(adapter); + /* Suggest workaround for known h/w issue */ if ((hw->mac.type == e1000_pchlan) && (er32(CTRL) & E1000_CTRL_TFCE)) e_err("Try turning off Tx pause (flow control) via ethtool\n"); @@ -1149,9 +1180,6 @@ static void e1000e_tx_hwtstamp_work(struct work_struct *work) tx_hwtstamp_work); struct e1000_hw *hw = &adapter->hw; - if (!adapter->tx_hwtstamp_skb) - return; - if (er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_VALID) { struct skb_shared_hwtstamps shhwtstamps; u64 txstmp; @@ -1164,6 +1192,12 @@ static void e1000e_tx_hwtstamp_work(struct work_struct *work) skb_tstamp_tx(adapter->tx_hwtstamp_skb, &shhwtstamps); dev_kfree_skb_any(adapter->tx_hwtstamp_skb); adapter->tx_hwtstamp_skb = NULL; + } else if (time_after(jiffies, adapter->tx_hwtstamp_start + + adapter->tx_timeout_factor * HZ)) { + dev_kfree_skb_any(adapter->tx_hwtstamp_skb); + adapter->tx_hwtstamp_skb = NULL; + adapter->tx_hwtstamp_timeouts++; + e_warn("clearing Tx timestamp hang\n"); } else { /* reschedule to check later */ schedule_work(&adapter->tx_hwtstamp_work); @@ -1196,6 +1230,7 @@ static bool e1000_clean_tx_irq(struct e1000_ring *tx_ring) while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) && (count < tx_ring->count)) { bool cleaned = false; + rmb(); /* read buffer_info after eop_desc */ for (; !cleaned; count++) { tx_desc = E1000_TX_DESC(*tx_ring, i); @@ -1703,7 +1738,7 @@ static void e1000_clean_rx_ring(struct e1000_ring *rx_ring) adapter->flags2 &= ~FLAG2_IS_DISCARDING; writel(0, rx_ring->head); - if (rx_ring->adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) + if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) e1000e_update_rdt_wa(rx_ring, 0); else writel(0, rx_ring->tail); @@ -1751,6 +1786,7 @@ static irqreturn_t e1000_intr_msi(int __always_unused irq, void *data) adapter->flags & FLAG_RX_NEEDS_RESTART) { /* disable receives */ u32 rctl = er32(RCTL); + ew32(RCTL, rctl & ~E1000_RCTL_EN); adapter->flags |= FLAG_RESTART_NOW; } @@ -1958,6 +1994,7 @@ static void e1000_configure_msix(struct e1000_adapter *adapter) /* Workaround issue with spurious interrupts on 82574 in MSI-X mode */ if (hw->mac.type == e1000_82574) { u32 rfctl = er32(RFCTL); + rfctl |= E1000_RFCTL_ACK_DIS; ew32(RFCTL, rfctl); } @@ -2040,13 +2077,16 @@ void e1000e_set_interrupt_capability(struct e1000_adapter *adapter) msix_entry), GFP_KERNEL); if (adapter->msix_entries) { + struct e1000_adapter *a = adapter; + for (i = 0; i < adapter->num_vectors; i++) adapter->msix_entries[i].entry = i; - err = pci_enable_msix(adapter->pdev, - adapter->msix_entries, - adapter->num_vectors); - if (err == 0) + err = pci_enable_msix_range(a->pdev, + a->msix_entries, + a->num_vectors, + a->num_vectors); + if (err > 0) return; } /* MSI-X failed, so fall through and try MSI */ @@ -2199,6 +2239,7 @@ static void e1000_irq_disable(struct e1000_adapter *adapter) if (adapter->msix_entries) { int i; + for (i = 0; i < adapter->num_vectors; i++) synchronize_irq(adapter->msix_entries[i].vector); } else { @@ -2404,7 +2445,7 @@ static void e1000_clean_tx_ring(struct e1000_ring *tx_ring) tx_ring->next_to_clean = 0; writel(0, tx_ring->head); - if (tx_ring->adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) + if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) e1000e_update_tdt_wa(tx_ring, 0); else writel(0, tx_ring->tail); @@ -2896,7 +2937,7 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) struct e1000_hw *hw = &adapter->hw; struct e1000_ring *tx_ring = adapter->tx_ring; u64 tdba; - u32 tdlen, tarc; + u32 tdlen, tctl, tarc; /* Setup the HW Tx Head and Tail descriptor pointers */ tdba = tx_ring->dma; @@ -2916,6 +2957,7 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) if (adapter->flags2 & FLAG2_DMA_BURST) { u32 txdctl = er32(TXDCTL(0)); + txdctl &= ~(E1000_TXDCTL_PTHRESH | E1000_TXDCTL_HTHRESH | E1000_TXDCTL_WTHRESH); /* set up some performance related parameters to encourage the @@ -2933,6 +2975,12 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) /* erratum work around: set txdctl the same for both queues */ ew32(TXDCTL(1), er32(TXDCTL(0))); + /* Program the Transmit Control Register */ + tctl = er32(TCTL); + tctl &= ~E1000_TCTL_CT; + tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC | + (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT); + if (adapter->flags & FLAG_TARC_SPEED_MODE_BIT) { tarc = er32(TARC(0)); /* set the speed mode bit, we'll clear it if we're not at @@ -2963,6 +3011,8 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) /* enable Report Status bit */ adapter->txd_cmd |= E1000_TXD_CMD_RS; + ew32(TCTL, tctl); + hw->mac.ops.config_collision_dist(hw); } @@ -2978,7 +3028,10 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) u32 rctl, rfctl; u32 pages = 0; - /* Workaround Si errata on PCHx - configure jumbo frame flow */ + /* Workaround Si errata on PCHx - configure jumbo frame flow. + * If jumbo frames not set, program related MAC/PHY registers + * to h/w defaults + */ if (hw->mac.type >= e1000_pch2lan) { s32 ret_val; @@ -2988,7 +3041,7 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, false); if (ret_val) - e_dbg("failed to enable jumbo frame workaround mode\n"); + e_dbg("failed to enable|disable jumbo frame workaround mode\n"); } /* Program MC offset vector base */ @@ -3223,6 +3276,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) if (adapter->flags & FLAG_IS_ICH) { u32 rxdctl = er32(RXDCTL(0)); + ew32(RXDCTL(0), rxdctl | 0x3); } @@ -3287,9 +3341,11 @@ static int e1000e_write_uc_addr_list(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - unsigned int rar_entries = hw->mac.rar_entry_count; + unsigned int rar_entries; int count = 0; + rar_entries = hw->mac.ops.rar_get_count(hw); + /* save a rar entry for our hardware address */ rar_entries--; @@ -3308,9 +3364,13 @@ static int e1000e_write_uc_addr_list(struct net_device *netdev) * combining */ netdev_for_each_uc_addr(ha, netdev) { + int rval; + if (!rar_entries) break; - hw->mac.ops.rar_set(hw, ha->addr, rar_entries--); + rval = hw->mac.ops.rar_set(hw, ha->addr, rar_entries--); + if (rval < 0) + return -ENOMEM; count++; } } @@ -3340,6 +3400,9 @@ static void e1000e_set_rx_mode(struct net_device *netdev) struct e1000_hw *hw = &adapter->hw; u32 rctl; + if (pm_runtime_suspended(netdev->dev.parent)) + return; + /* Check for Promiscuous and All Multicast modes */ rctl = er32(RCTL); @@ -3491,10 +3554,10 @@ s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca) * specified. Matching the kind of event packet is not supported, with the * exception of "all V2 events regardless of level 2 or 4". **/ -static int e1000e_config_hwtstamp(struct e1000_adapter *adapter) +static int e1000e_config_hwtstamp(struct e1000_adapter *adapter, + struct hwtstamp_config *config) { struct e1000_hw *hw = &adapter->hw; - struct hwtstamp_config *config = &adapter->hwtstamp_config; u32 tsync_tx_ctl = E1000_TSYNCTXCTL_ENABLED; u32 tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED; u32 rxmtrl = 0; @@ -3595,6 +3658,8 @@ static int e1000e_config_hwtstamp(struct e1000_adapter *adapter) return -ERANGE; } + adapter->hwtstamp_config = *config; + /* enable/disable Tx h/w time stamping */ regval = er32(TSYNCTXCTL); regval &= ~E1000_TSYNCTXCTL_ENABLED; @@ -3698,10 +3763,6 @@ void e1000e_power_up_phy(struct e1000_adapter *adapter) */ static void e1000_power_down_phy(struct e1000_adapter *adapter) { - /* WoL is enabled */ - if (adapter->wol) - return; - if (adapter->hw.phy.ops.power_down) adapter->hw.phy.ops.power_down(&adapter->hw); } @@ -3826,6 +3887,8 @@ void e1000e_reset(struct e1000_adapter *adapter) break; } + pba = 14; + ew32(PBA, pba); fc->high_water = ((pba << 10) * 9 / 10) & E1000_FCRTH_RTH; fc->low_water = ((pba << 10) * 8 / 10) & E1000_FCRTL_RTL; break; @@ -3881,7 +3944,7 @@ void e1000e_reset(struct e1000_adapter *adapter) e1000e_reset_adaptive(hw); /* initialize systim and reset the ns time counter */ - e1000e_config_hwtstamp(adapter); + e1000e_config_hwtstamp(adapter, &adapter->hwtstamp_config); /* Set EEE advertisement as appropriate */ if (adapter->flags2 & FLAG2_HAS_EEE) { @@ -3916,10 +3979,8 @@ void e1000e_reset(struct e1000_adapter *adapter) } if (!netif_running(adapter->netdev) && - !test_bit(__E1000_TESTING, &adapter->state)) { + !test_bit(__E1000_TESTING, &adapter->state)) e1000_power_down_phy(adapter); - return; - } e1000_get_phy_info(hw); @@ -3986,7 +4047,12 @@ static void e1000e_flush_descriptors(struct e1000_adapter *adapter) static void e1000e_update_stats(struct e1000_adapter *adapter); -void e1000e_down(struct e1000_adapter *adapter) +/** + * e1000e_down - quiesce the device and optionally reset the hardware + * @adapter: board private structure + * @reset: boolean flag to reset the hardware or not + */ +void e1000e_down(struct e1000_adapter *adapter, bool reset) { struct net_device *netdev = adapter->netdev; struct e1000_hw *hw = &adapter->hw; @@ -4034,12 +4100,14 @@ void e1000e_down(struct e1000_adapter *adapter) adapter->link_speed = 0; adapter->link_duplex = 0; - if (!pci_channel_offline(adapter->pdev)) - e1000e_reset(adapter); + /* Disable Si errata workaround on PCHx for jumbo frame flow */ + if ((hw->mac.type >= e1000_pch2lan) && + (adapter->netdev->mtu > ETH_DATA_LEN) && + e1000_lv_jumbo_workaround_ich8lan(hw, false)) + e_dbg("failed to disable jumbo frame workaround mode\n"); - /* TODO: for power management, we could drop the link and - * pci_disable_device here. - */ + if (reset && !pci_channel_offline(adapter->pdev)) + e1000e_reset(adapter); } void e1000e_reinit_locked(struct e1000_adapter *adapter) @@ -4047,7 +4115,7 @@ void e1000e_reinit_locked(struct e1000_adapter *adapter) might_sleep(); while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) usleep_range(1000, 2000); - e1000e_down(adapter); + e1000e_down(adapter, true); e1000e_up(adapter); clear_bit(__E1000_RESETTING, &adapter->state); } @@ -4061,12 +4129,37 @@ static cycle_t e1000e_cyclecounter_read(const struct cyclecounter *cc) struct e1000_adapter *adapter = container_of(cc, struct e1000_adapter, cc); struct e1000_hw *hw = &adapter->hw; - cycle_t systim; + cycle_t systim, systim_next; /* latch SYSTIMH on read of SYSTIML */ systim = (cycle_t)er32(SYSTIML); systim |= (cycle_t)er32(SYSTIMH) << 32; + if ((hw->mac.type == e1000_82574) || (hw->mac.type == e1000_82583)) { + u64 incvalue, time_delta, rem, temp; + int i; + + /* errata for 82574/82583 possible bad bits read from SYSTIMH/L + * check to see that the time is incrementing at a reasonable + * rate and is a multiple of incvalue + */ + incvalue = er32(TIMINCA) & E1000_TIMINCA_INCVALUE_MASK; + for (i = 0; i < E1000_MAX_82574_SYSTIM_REREADS; i++) { + /* latch SYSTIMH on read of SYSTIML */ + systim_next = (cycle_t)er32(SYSTIML); + systim_next |= (cycle_t)er32(SYSTIMH) << 32; + + time_delta = systim_next - systim; + temp = time_delta; + rem = do_div(temp, incvalue); + + systim = systim_next; + + if ((time_delta < E1000_82574_SYSTIM_EPSILON) && + (rem == 0)) + break; + } + } return systim; } @@ -4325,7 +4418,6 @@ static int e1000_open(struct net_device *netdev) adapter->tx_hang_recheck = false; netif_start_queue(netdev); - adapter->idle_check = true; hw->mac.get_link_status = true; pm_runtime_put(&pdev->dev); @@ -4375,14 +4467,15 @@ static int e1000_close(struct net_device *netdev) pm_runtime_get_sync(&pdev->dev); if (!test_bit(__E1000_DOWN, &adapter->state)) { - e1000e_down(adapter); + e1000e_down(adapter, true); e1000_free_irq(adapter); + + /* Link status message must follow this format */ + pr_info("%s NIC Link is Down\n", adapter->netdev->name); } napi_disable(&adapter->napi); - e1000_power_down_phy(adapter); - e1000e_free_tx_resources(adapter->tx_ring); e1000e_free_rx_resources(adapter->rx_ring); @@ -4459,11 +4552,16 @@ static void e1000e_update_phy_task(struct work_struct *work) struct e1000_adapter *adapter = container_of(work, struct e1000_adapter, update_phy_task); + struct e1000_hw *hw = &adapter->hw; if (test_bit(__E1000_DOWN, &adapter->state)) return; - e1000_get_phy_info(&adapter->hw); + e1000_get_phy_info(hw); + + /* Enable EEE on 82579 after link up */ + if (hw->phy.type >= e1000_phy_82579) + e1000_set_eee_pchlan(hw); } /** @@ -4666,6 +4764,7 @@ static void e1000e_update_stats(struct e1000_adapter *adapter) /* Correctable ECC Errors */ if (hw->mac.type == e1000_pch_lpt) { u32 pbeccsts = er32(PBECCSTS); + adapter->corr_errors += pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK; adapter->uncorr_errors += @@ -4683,11 +4782,11 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) struct e1000_hw *hw = &adapter->hw; struct e1000_phy_regs *phy = &adapter->phy_regs; - if ((er32(STATUS) & E1000_STATUS_LU) && + if (!pm_runtime_suspended((&adapter->pdev->dev)->parent) && + (er32(STATUS) & E1000_STATUS_LU) && (adapter->hw.phy.media_type == e1000_media_type_copper)) { int ret_val; - pm_runtime_get_sync(&adapter->pdev->dev); ret_val = e1e_rphy(hw, MII_BMCR, &phy->bmcr); ret_val |= e1e_rphy(hw, MII_BMSR, &phy->bmsr); ret_val |= e1e_rphy(hw, MII_ADVERTISE, &phy->advertise); @@ -4698,7 +4797,6 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) ret_val |= e1e_rphy(hw, MII_ESTATUS, &phy->estatus); if (ret_val) e_warn("Error reading PHY register\n"); - pm_runtime_put_sync(&adapter->pdev->dev); } else { /* Do not read PHY registers if link is not up * Set values to typical power-on defaults @@ -4780,6 +4878,7 @@ static void e1000e_enable_receives(struct e1000_adapter *adapter) (adapter->flags & FLAG_RESTART_NOW)) { struct e1000_hw *hw = &adapter->hw; u32 rctl = er32(RCTL); + ew32(RCTL, rctl | E1000_RCTL_EN); adapter->flags &= ~FLAG_RESTART_NOW; } @@ -4799,6 +4898,7 @@ static void e1000e_check_82574_phy_workaround(struct e1000_adapter *adapter) if (adapter->phy_hang_count > 1) { adapter->phy_hang_count = 0; + e_dbg("PHY appears hung - resetting\n"); schedule_work(&adapter->reset_task); } } @@ -4870,7 +4970,7 @@ static void e1000_watchdog_task(struct work_struct *work) */ if ((hw->phy.type == e1000_phy_igp_3 || hw->phy.type == e1000_phy_bm) && - (hw->mac.autoneg == true) && + hw->mac.autoneg && (adapter->link_speed == SPEED_10 || adapter->link_speed == SPEED_100) && (adapter->link_duplex == HALF_DUPLEX)) { @@ -4901,6 +5001,7 @@ static void e1000_watchdog_task(struct work_struct *work) if ((adapter->flags & FLAG_TARC_SPEED_MODE_BIT) && !txb2b) { u32 tarc0; + tarc0 = er32(TARC(0)); tarc0 &= ~SPEED_MODE_BIT; ew32(TARC(0), tarc0); @@ -4957,15 +5058,11 @@ static void e1000_watchdog_task(struct work_struct *work) mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ)); - /* The link is lost so the controller stops DMA. - * If there is queued Tx work that cannot be done - * or if on an 8000ES2LAN which requires a Rx packet - * buffer work-around on link down event, reset the - * controller to flush the Tx/Rx packet buffers. - * (Do the reset outside of interrupt context). + /* 8000ES2LAN requires a Rx packet buffer work-around + * on link down event; reset the controller to flush + * the Rx packet buffer. */ - if ((adapter->flags & FLAG_RX_NEEDS_RESTART) || - (e1000_desc_unused(tx_ring) + 1 < tx_ring->count)) + if (adapter->flags & FLAG_RX_NEEDS_RESTART) adapter->flags |= FLAG_RESTART_NOW; else pm_schedule_suspend(netdev->dev.parent, @@ -4988,6 +5085,15 @@ link_up: adapter->gotc_old = adapter->stats.gotc; spin_unlock(&adapter->stats64_lock); + /* If the link is lost the controller stops DMA, but + * if there is queued Tx work it cannot be done. So + * reset the controller to flush the Tx packet buffers. + */ + if (!netif_carrier_ok(netdev) && + (e1000_desc_unused(tx_ring) + 1 < tx_ring->count)) + adapter->flags |= FLAG_RESTART_NOW; + + /* If reset is necessary, do it outside of interrupt context. */ if (adapter->flags & FLAG_RESTART_NOW) { schedule_work(&adapter->reset_task); /* return immediately since reset is imminent */ @@ -5066,16 +5172,14 @@ static int e1000_tso(struct e1000_ring *tx_ring, struct sk_buff *skb) u32 cmd_length = 0; u16 ipcse = 0, mss; u8 ipcss, ipcso, tucss, tucso, hdr_len; + int err; if (!skb_is_gso(skb)) return 0; - if (skb_header_cloned(skb)) { - int err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); - - if (err) - return err; - } + err = skb_cow_head(skb, 0); + if (err < 0) + return err; hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); mss = skb_shinfo(skb)->gso_size; @@ -5138,7 +5242,7 @@ static bool e1000_tx_csum(struct e1000_ring *tx_ring, struct sk_buff *skb) __be16 protocol; if (skb->ip_summed != CHECKSUM_PARTIAL) - return 0; + return false; if (skb->protocol == cpu_to_be16(ETH_P_8021Q)) protocol = vlan_eth_hdr(skb)->h_vlan_encapsulated_proto; @@ -5183,7 +5287,7 @@ static bool e1000_tx_csum(struct e1000_ring *tx_ring, struct sk_buff *skb) i = 0; tx_ring->next_to_use = i; - return 1; + return true; } static int e1000_tx_map(struct e1000_ring *tx_ring, struct sk_buff *skb, @@ -5546,6 +5650,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; tx_flags |= E1000_TX_FLAGS_HWTSTAMP; adapter->tx_hwtstamp_skb = skb_get(skb); + adapter->tx_hwtstamp_start = jiffies; schedule_work(&adapter->tx_hwtstamp_work); } else { skb_tx_timestamp(skb); @@ -5654,7 +5759,7 @@ struct rtnl_link_stats64 *e1000e_get_stats64(struct net_device *netdev, static int e1000_change_mtu(struct net_device *netdev, int new_mtu) { struct e1000_adapter *adapter = netdev_priv(netdev); - int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; + int max_frame = new_mtu + VLAN_HLEN + ETH_HLEN + ETH_FCS_LEN; /* Jumbo frame support */ if ((max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) && @@ -5684,8 +5789,11 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) adapter->max_frame_size = max_frame; e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu); netdev->mtu = new_mtu; + + pm_runtime_get_sync(netdev->dev.parent); + if (netif_running(netdev)) - e1000e_down(adapter); + e1000e_down(adapter, true); /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN * means we reserve 2 more, this pushes us to allocate from the next @@ -5711,6 +5819,8 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) else e1000e_reset(adapter); + pm_runtime_put_sync(netdev->dev.parent); + clear_bit(__E1000_RESETTING, &adapter->state); return 0; @@ -5790,7 +5900,7 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, * specified. Matching the kind of event packet is not supported, with the * exception of "all V2 events regardless of level 2 or 4". **/ -static int e1000e_hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr) +static int e1000e_hwtstamp_set(struct net_device *netdev, struct ifreq *ifr) { struct e1000_adapter *adapter = netdev_priv(netdev); struct hwtstamp_config config; @@ -5799,14 +5909,10 @@ static int e1000e_hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr) if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) return -EFAULT; - adapter->hwtstamp_config = config; - - ret_val = e1000e_config_hwtstamp(adapter); + ret_val = e1000e_config_hwtstamp(adapter, &config); if (ret_val) return ret_val; - config = adapter->hwtstamp_config; - switch (config.rx_filter) { case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: @@ -5829,6 +5935,14 @@ static int e1000e_hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr) sizeof(config)) ? -EFAULT : 0; } +static int e1000e_hwtstamp_get(struct net_device *netdev, struct ifreq *ifr) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + + return copy_to_user(ifr->ifr_data, &adapter->hwtstamp_config, + sizeof(adapter->hwtstamp_config)) ? -EFAULT : 0; +} + static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) { switch (cmd) { @@ -5837,7 +5951,9 @@ static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) case SIOCSMIIREG: return e1000_mii_ioctl(netdev, ifr, cmd); case SIOCSHWTSTAMP: - return e1000e_hwtstamp_ioctl(netdev, ifr); + return e1000e_hwtstamp_set(netdev, ifr); + case SIOCGHWTSTAMP: + return e1000e_hwtstamp_get(netdev, ifr); default: return -EOPNOTSUPP; } @@ -5846,7 +5962,7 @@ static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc) { struct e1000_hw *hw = &adapter->hw; - u32 i, mac_reg; + u32 i, mac_reg, wuc; u16 phy_reg, wuc_enable; int retval; @@ -5893,13 +6009,18 @@ static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc) phy_reg |= BM_RCTL_RFCE; hw->phy.ops.write_reg_page(&adapter->hw, BM_RCTL, phy_reg); + wuc = E1000_WUC_PME_EN; + if (wufc & (E1000_WUFC_MAG | E1000_WUFC_LNKC)) + wuc |= E1000_WUC_APME; + /* enable PHY wakeup in MAC register */ ew32(WUFC, wufc); - ew32(WUC, E1000_WUC_PHY_WAKE | E1000_WUC_PME_EN); + ew32(WUC, (E1000_WUC_PHY_WAKE | E1000_WUC_APMPME | + E1000_WUC_PME_STATUS | wuc)); /* configure and enable PHY wakeup in PHY registers */ hw->phy.ops.write_reg_page(&adapter->hw, BM_WUFC, wufc); - hw->phy.ops.write_reg_page(&adapter->hw, BM_WUC, E1000_WUC_PME_EN); + hw->phy.ops.write_reg_page(&adapter->hw, BM_WUC, wuc); /* activate PHY wakeup */ wuc_enable |= BM_WUC_ENABLE_BIT | BM_WUC_HOST_WU_BIT; @@ -5912,15 +6033,10 @@ release: return retval; } -static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) +static int e1000e_pm_freeze(struct device *dev) { - struct net_device *netdev = pci_get_drvdata(pdev); + struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev)); struct e1000_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - u32 ctrl, ctrl_ext, rctl, status; - /* Runtime suspend should only enable wakeup for link changes */ - u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol; - int retval = 0; netif_device_detach(netdev); @@ -5931,11 +6047,29 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) usleep_range(10000, 20000); WARN_ON(test_bit(__E1000_RESETTING, &adapter->state)); - e1000e_down(adapter); + + /* Quiesce the device without resetting the hardware */ + e1000e_down(adapter, false); e1000_free_irq(adapter); } e1000e_reset_interrupt_capability(adapter); + /* Allow time for pending master requests to run */ + e1000e_disable_pcie_master(&adapter->hw); + + return 0; +} + +static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 ctrl, ctrl_ext, rctl, status; + /* Runtime suspend should only enable wakeup for link changes */ + u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol; + int retval = 0; + status = er32(STATUS); if (status & E1000_STATUS_LU) wufc &= ~E1000_WUFC_LNKC; @@ -5966,12 +6100,12 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) ew32(CTRL_EXT, ctrl_ext); } + if (!runtime) + e1000e_power_up_phy(adapter); + if (adapter->flags & FLAG_IS_ICH) e1000_suspend_workarounds_ich8lan(&adapter->hw); - /* Allow time for pending master requests to run */ - e1000e_disable_pcie_master(&adapter->hw); - if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) { /* enable wakeup by the PHY */ retval = e1000_init_phy_wakeup(adapter, wufc); @@ -5985,25 +6119,47 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) } else { ew32(WUC, 0); ew32(WUFC, 0); + + e1000_power_down_phy(adapter); } - if (adapter->hw.phy.type == e1000_phy_igp_3) + if (adapter->hw.phy.type == e1000_phy_igp_3) { e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw); + } else if (hw->mac.type == e1000_pch_lpt) { + if (!(wufc & (E1000_WUFC_EX | E1000_WUFC_MC | E1000_WUFC_BC))) + /* ULP does not support wake from unicast, multicast + * or broadcast. + */ + retval = e1000_enable_ulp_lpt_lp(hw, !runtime); + + if (retval) + return retval; + } + /* Release control of h/w to f/w. If f/w is AMT enabled, this * would have already happened in close and is redundant. */ e1000e_release_hw_control(adapter); + pci_clear_master(pdev); + /* The pci-e switch on some quad port adapters will report a * correctable error when the MAC transitions from D0 to D3. To * prevent this we need to mask off the correctable errors on the * downstream port of the pci-e switch. + * + * We don't have the associated upstream bridge while assigning + * the PCI device into guest. For example, the KVM on power is + * one of the cases. */ if (adapter->flags & FLAG_IS_QUAD_PORT) { struct pci_dev *us_dev = pdev->bus->self; u16 devctl; + if (!us_dev) + return 0; + pcie_capability_read_word(us_dev, PCI_EXP_DEVCTL, &devctl); pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL, (devctl & ~PCI_EXP_DEVCTL_CERE)); @@ -6017,53 +6173,82 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) return 0; } -#ifdef CONFIG_PCIEASPM -static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state) +/** + * e1000e_disable_aspm - Disable ASPM states + * @pdev: pointer to PCI device struct + * @state: bit-mask of ASPM states to disable + * + * Some devices *must* have certain ASPM states disabled per hardware errata. + **/ +static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state) { + struct pci_dev *parent = pdev->bus->self; + u16 aspm_dis_mask = 0; + u16 pdev_aspmc, parent_aspmc; + + switch (state) { + case PCIE_LINK_STATE_L0S: + case PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1: + aspm_dis_mask |= PCI_EXP_LNKCTL_ASPM_L0S; + /* fall-through - can't have L1 without L0s */ + case PCIE_LINK_STATE_L1: + aspm_dis_mask |= PCI_EXP_LNKCTL_ASPM_L1; + break; + default: + return; + } + + pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &pdev_aspmc); + pdev_aspmc &= PCI_EXP_LNKCTL_ASPMC; + + if (parent) { + pcie_capability_read_word(parent, PCI_EXP_LNKCTL, + &parent_aspmc); + parent_aspmc &= PCI_EXP_LNKCTL_ASPMC; + } + + /* Nothing to do if the ASPM states to be disabled already are */ + if (!(pdev_aspmc & aspm_dis_mask) && + (!parent || !(parent_aspmc & aspm_dis_mask))) + return; + + dev_info(&pdev->dev, "Disabling ASPM %s %s\n", + (aspm_dis_mask & pdev_aspmc & PCI_EXP_LNKCTL_ASPM_L0S) ? + "L0s" : "", + (aspm_dis_mask & pdev_aspmc & PCI_EXP_LNKCTL_ASPM_L1) ? + "L1" : ""); + +#ifdef CONFIG_PCIEASPM pci_disable_link_state_locked(pdev, state); -} -#else -static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state) -{ - u16 aspm_ctl = 0; - if (state & PCIE_LINK_STATE_L0S) - aspm_ctl |= PCI_EXP_LNKCTL_ASPM_L0S; - if (state & PCIE_LINK_STATE_L1) - aspm_ctl |= PCI_EXP_LNKCTL_ASPM_L1; + /* Double-check ASPM control. If not disabled by the above, the + * BIOS is preventing that from happening (or CONFIG_PCIEASPM is + * not enabled); override by writing PCI config space directly. + */ + pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &pdev_aspmc); + pdev_aspmc &= PCI_EXP_LNKCTL_ASPMC; + + if (!(aspm_dis_mask & pdev_aspmc)) + return; +#endif /* Both device and parent should have the same ASPM setting. * Disable ASPM in downstream component first and then upstream. */ - pcie_capability_clear_word(pdev, PCI_EXP_LNKCTL, aspm_ctl); - - if (pdev->bus->self) - pcie_capability_clear_word(pdev->bus->self, PCI_EXP_LNKCTL, - aspm_ctl); -} -#endif -static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state) -{ - dev_info(&pdev->dev, "Disabling ASPM %s %s\n", - (state & PCIE_LINK_STATE_L0S) ? "L0s" : "", - (state & PCIE_LINK_STATE_L1) ? "L1" : ""); + pcie_capability_clear_word(pdev, PCI_EXP_LNKCTL, aspm_dis_mask); - __e1000e_disable_aspm(pdev, state); + if (parent) + pcie_capability_clear_word(parent, PCI_EXP_LNKCTL, + aspm_dis_mask); } #ifdef CONFIG_PM -static bool e1000e_pm_ready(struct e1000_adapter *adapter) -{ - return !!adapter->tx_ring->buffer_info; -} - static int __e1000_resume(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; u16 aspm_disable_flag = 0; - u32 err; if (adapter->flags2 & FLAG2_DISABLE_ASPM_L0S) aspm_disable_flag = PCIE_LINK_STATE_L0S; @@ -6074,13 +6259,6 @@ static int __e1000_resume(struct pci_dev *pdev) pci_set_master(pdev); - e1000e_set_interrupt_capability(adapter); - if (netif_running(netdev)) { - err = e1000_request_irq(adapter); - if (err) - return err; - } - if (hw->mac.type >= e1000_pch2lan) e1000_resume_workarounds_pchlan(&adapter->hw); @@ -6103,6 +6281,7 @@ static int __e1000_resume(struct pci_dev *pdev) e1e_wphy(&adapter->hw, BM_WUS, ~0); } else { u32 wus = er32(WUS); + if (wus) { e_info("MAC Wakeup cause - %s\n", wus & E1000_WUS_EX ? "Unicast Packet" : @@ -6119,11 +6298,6 @@ static int __e1000_resume(struct pci_dev *pdev) e1000_init_manageability_pt(adapter); - if (netif_running(netdev)) - e1000e_up(adapter); - - netif_device_attach(netdev); - /* If the controller has AMT, do not set DRV_LOAD until the interface * is up. For all other cases, let the f/w know that the h/w is now * under the control of the driver. @@ -6135,74 +6309,110 @@ static int __e1000_resume(struct pci_dev *pdev) } #ifdef CONFIG_PM_SLEEP -static int e1000_suspend(struct device *dev) +static int e1000e_pm_thaw(struct device *dev) +{ + struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev)); + struct e1000_adapter *adapter = netdev_priv(netdev); + + e1000e_set_interrupt_capability(adapter); + if (netif_running(netdev)) { + u32 err = e1000_request_irq(adapter); + + if (err) + return err; + + e1000e_up(adapter); + } + + netif_device_attach(netdev); + + return 0; +} + +static int e1000e_pm_suspend(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); + e1000e_pm_freeze(dev); + return __e1000_shutdown(pdev, false); } -static int e1000_resume(struct device *dev) +static int e1000e_pm_resume(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); - struct net_device *netdev = pci_get_drvdata(pdev); - struct e1000_adapter *adapter = netdev_priv(netdev); + int rc; - if (e1000e_pm_ready(adapter)) - adapter->idle_check = true; + rc = __e1000_resume(pdev); + if (rc) + return rc; - return __e1000_resume(pdev); + return e1000e_pm_thaw(dev); } #endif /* CONFIG_PM_SLEEP */ #ifdef CONFIG_PM_RUNTIME -static int e1000_runtime_suspend(struct device *dev) +static int e1000e_pm_runtime_idle(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); - if (!e1000e_pm_ready(adapter)) - return 0; + if (!e1000e_has_link(adapter)) + pm_schedule_suspend(dev, 5 * MSEC_PER_SEC); - return __e1000_shutdown(pdev, true); + return -EBUSY; } -static int e1000_idle(struct device *dev) +static int e1000e_pm_runtime_resume(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); + int rc; - if (!e1000e_pm_ready(adapter)) - return 0; + rc = __e1000_resume(pdev); + if (rc) + return rc; - if (adapter->idle_check) { - adapter->idle_check = false; - if (!e1000e_has_link(adapter)) - pm_schedule_suspend(dev, MSEC_PER_SEC); - } + if (netdev->flags & IFF_UP) + rc = e1000e_up(adapter); - return -EBUSY; + return rc; } -static int e1000_runtime_resume(struct device *dev) +static int e1000e_pm_runtime_suspend(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); - if (!e1000e_pm_ready(adapter)) - return 0; + if (netdev->flags & IFF_UP) { + int count = E1000_CHECK_RESET_COUNT; + + while (test_bit(__E1000_RESETTING, &adapter->state) && count--) + usleep_range(10000, 20000); + + WARN_ON(test_bit(__E1000_RESETTING, &adapter->state)); + + /* Down the device without resetting the hardware */ + e1000e_down(adapter, false); + } + + if (__e1000_shutdown(pdev, true)) { + e1000e_pm_runtime_resume(dev); + return -EBUSY; + } - adapter->idle_check = !dev->power.runtime_auto; - return __e1000_resume(pdev); + return 0; } #endif /* CONFIG_PM_RUNTIME */ #endif /* CONFIG_PM */ static void e1000_shutdown(struct pci_dev *pdev) { + e1000e_pm_freeze(&pdev->dev); + __e1000_shutdown(pdev, false); } @@ -6288,7 +6498,7 @@ static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev, return PCI_ERS_RESULT_DISCONNECT; if (netif_running(netdev)) - e1000e_down(adapter); + e1000e_down(adapter, true); pci_disable_device(pdev); /* Request a slot slot reset. */ @@ -6300,7 +6510,7 @@ static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev, * @pdev: Pointer to PCI device * * Restart the card from scratch, as if from a cold-boot. Implementation - * resembles the first-half of the e1000_resume routine. + * resembles the first-half of the e1000e_pm_resume routine. */ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev) { @@ -6347,7 +6557,7 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev) * * This callback is called when the error recovery driver tells us that * its OK to resume normal operation. Implementation resembles the - * second-half of the e1000_resume routine. + * second-half of the e1000e_pm_resume routine. */ static void e1000_io_resume(struct pci_dev *pdev) { @@ -6511,21 +6721,15 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) return err; pci_using_dac = 0; - err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); + err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); if (!err) { - err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); - if (!err) - pci_using_dac = 1; + pci_using_dac = 1; } else { - err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); if (err) { - err = dma_set_coherent_mask(&pdev->dev, - DMA_BIT_MASK(32)); - if (err) { - dev_err(&pdev->dev, - "No usable DMA configuration, aborting\n"); - goto err_dma; - } + dev_err(&pdev->dev, + "No usable DMA configuration, aborting\n"); + goto err_dma; } } @@ -6723,10 +6927,6 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) adapter->hw.fc.current_mode = e1000_fc_default; adapter->hw.phy.autoneg_advertised = 0x2f; - /* ring size defaults */ - adapter->rx_ring->count = E1000_DEFAULT_RXD; - adapter->tx_ring->count = E1000_DEFAULT_TXD; - /* Initial Wake on LAN setting - If APM wake is enabled in * the EEPROM, enable the ACPI Magic Packet filter */ @@ -6862,9 +7062,6 @@ static void e1000_remove(struct pci_dev *pdev) } } - if (!(netdev->flags & IFF_UP)) - e1000_power_down_phy(adapter); - /* Don't lie to e1000_close() down the road. */ if (!down) clear_bit(__E1000_DOWN, &adapter->state); @@ -6903,7 +7100,7 @@ static const struct pci_error_handlers e1000_err_handler = { .resume = e1000_io_resume, }; -static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = { +static const struct pci_device_id e1000_pci_tbl[] = { { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_COPPER), board_82571 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_FIBER), board_82571 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER), board_82571 }, @@ -6976,18 +7173,27 @@ static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = { { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPT_I217_V), board_pch_lpt }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPTLP_I218_LM), board_pch_lpt }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPTLP_I218_V), board_pch_lpt }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_LM2), board_pch_lpt }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_V2), board_pch_lpt }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_LM3), board_pch_lpt }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_V3), board_pch_lpt }, { 0, 0, 0, 0, 0, 0, 0 } /* terminate list */ }; MODULE_DEVICE_TABLE(pci, e1000_pci_tbl); -#ifdef CONFIG_PM static const struct dev_pm_ops e1000_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(e1000_suspend, e1000_resume) - SET_RUNTIME_PM_OPS(e1000_runtime_suspend, e1000_runtime_resume, - e1000_idle) -}; +#ifdef CONFIG_PM_SLEEP + .suspend = e1000e_pm_suspend, + .resume = e1000e_pm_resume, + .freeze = e1000e_pm_freeze, + .thaw = e1000e_pm_thaw, + .poweroff = e1000e_pm_suspend, + .restore = e1000e_pm_resume, #endif + SET_RUNTIME_PM_OPS(e1000e_pm_runtime_suspend, e1000e_pm_runtime_resume, + e1000e_pm_runtime_idle) +}; /* PCI Device API Driver */ static struct pci_driver e1000_driver = { @@ -6995,11 +7201,9 @@ static struct pci_driver e1000_driver = { .id_table = e1000_pci_tbl, .probe = e1000_probe, .remove = e1000_remove, -#ifdef CONFIG_PM .driver = { .pm = &e1000_pm_ops, }, -#endif .shutdown = e1000_shutdown, .err_handler = &e1000_err_handler }; @@ -7013,9 +7217,10 @@ static struct pci_driver e1000_driver = { static int __init e1000_init_module(void) { int ret; + pr_info("Intel(R) PRO/1000 Network Driver - %s\n", e1000e_driver_version); - pr_info("Copyright(c) 1999 - 2013 Intel Corporation.\n"); + pr_info("Copyright(c) 1999 - 2014 Intel Corporation.\n"); ret = pci_register_driver(&e1000_driver); return ret; diff --git a/drivers/net/ethernet/intel/e1000e/nvm.c b/drivers/net/ethernet/intel/e1000e/nvm.c index d70a03906ac..b1f212b7baf 100644 --- a/drivers/net/ethernet/intel/e1000e/nvm.c +++ b/drivers/net/ethernet/intel/e1000e/nvm.c @@ -1,30 +1,23 @@ -/******************************************************************************* - - Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2013 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - Linux NICS <linux.nics@intel.com> - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +/* Intel PRO/1000 Linux driver + * Copyright(c) 1999 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * Linux NICS <linux.nics@intel.com> + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ #include "e1000.h" @@ -405,6 +398,7 @@ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) /* Loop to allow for up to whole page write of eeprom */ while (widx < words) { u16 word_out = data[widx]; + word_out = (word_out >> 8) | (word_out << 8); e1000_shift_out_eec_bits(hw, word_out, 16); widx++; diff --git a/drivers/net/ethernet/intel/e1000e/nvm.h b/drivers/net/ethernet/intel/e1000e/nvm.h index 45fc6956162..342bf69efab 100644 --- a/drivers/net/ethernet/intel/e1000e/nvm.h +++ b/drivers/net/ethernet/intel/e1000e/nvm.h @@ -1,30 +1,23 @@ -/******************************************************************************* - - Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2013 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - Linux NICS <linux.nics@intel.com> - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +/* Intel PRO/1000 Linux driver + * Copyright(c) 1999 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * Linux NICS <linux.nics@intel.com> + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ #ifndef _E1000E_NVM_H_ #define _E1000E_NVM_H_ diff --git a/drivers/net/ethernet/intel/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c index c16bd75b6ca..aa1923f7ebd 100644 --- a/drivers/net/ethernet/intel/e1000e/param.c +++ b/drivers/net/ethernet/intel/e1000e/param.c @@ -1,30 +1,23 @@ -/******************************************************************************* - - Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2013 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - Linux NICS <linux.nics@intel.com> - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +/* Intel PRO/1000 Linux driver + * Copyright(c) 1999 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * Linux NICS <linux.nics@intel.com> + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ #include <linux/netdevice.h> #include <linux/module.h> @@ -381,6 +374,12 @@ void e1000e_check_options(struct e1000_adapter *adapter) "%s set to dynamic mode\n", opt.name); adapter->itr = 20000; break; + case 2: + dev_info(&adapter->pdev->dev, + "%s Invalid mode - setting default\n", + opt.name); + adapter->itr_setting = opt.def; + /* fall-through */ case 3: dev_info(&adapter->pdev->dev, "%s set to dynamic conservative mode\n", @@ -437,6 +436,7 @@ void e1000e_check_options(struct e1000_adapter *adapter) if (num_IntMode > bd) { unsigned int int_mode = IntMode[bd]; + e1000_validate_option(&int_mode, &opt, adapter); adapter->int_mode = int_mode; } else { @@ -458,6 +458,7 @@ void e1000e_check_options(struct e1000_adapter *adapter) if (num_SmartPowerDownEnable > bd) { unsigned int spd = SmartPowerDownEnable[bd]; + e1000_validate_option(&spd, &opt, adapter); if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) && spd) adapter->flags |= FLAG_SMART_POWER_DOWN; @@ -474,6 +475,7 @@ void e1000e_check_options(struct e1000_adapter *adapter) if (num_CrcStripping > bd) { unsigned int crc_stripping = CrcStripping[bd]; + e1000_validate_option(&crc_stripping, &opt, adapter); if (crc_stripping == OPTION_ENABLED) { adapter->flags2 |= FLAG2_CRC_STRIPPING; @@ -496,6 +498,7 @@ void e1000e_check_options(struct e1000_adapter *adapter) if (num_KumeranLockLoss > bd) { unsigned int kmrn_lock_loss = KumeranLockLoss[bd]; + e1000_validate_option(&kmrn_lock_loss, &opt, adapter); enabled = kmrn_lock_loss; } diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c index da2be59505c..b2005e13fb0 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.c +++ b/drivers/net/ethernet/intel/e1000e/phy.c @@ -1,30 +1,23 @@ -/******************************************************************************* - - Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2013 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - Linux NICS <linux.nics@intel.com> - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +/* Intel PRO/1000 Linux driver + * Copyright(c) 1999 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * Linux NICS <linux.nics@intel.com> + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ #include "e1000.h" @@ -1757,19 +1750,23 @@ s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, * it across the board. */ ret_val = e1e_rphy(hw, MII_BMSR, &phy_status); - if (ret_val) + if (ret_val) { /* If the first read fails, another entity may have * ownership of the resources, wait and try again to * see if they have relinquished the resources yet. */ - udelay(usec_interval); + if (usec_interval >= 1000) + msleep(usec_interval / 1000); + else + udelay(usec_interval); + } ret_val = e1e_rphy(hw, MII_BMSR, &phy_status); if (ret_val) break; if (phy_status & BMSR_LSTATUS) break; if (usec_interval >= 1000) - mdelay(usec_interval / 1000); + msleep(usec_interval / 1000); else udelay(usec_interval); } @@ -2899,6 +2896,7 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data, (hw->phy.addr == 2) && !(MAX_PHY_REG_ADDRESS & reg) && (data & (1 << 11))) { u16 data2 = 0x7EFF; + ret_val = e1000_access_phy_debug_regs_hv(hw, (1 << 6) | 0x3, &data2, false); diff --git a/drivers/net/ethernet/intel/e1000e/phy.h b/drivers/net/ethernet/intel/e1000e/phy.h index f4f71b9991e..537d2780b40 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.h +++ b/drivers/net/ethernet/intel/e1000e/phy.h @@ -1,30 +1,23 @@ -/******************************************************************************* - - Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2013 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - Linux NICS <linux.nics@intel.com> - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +/* Intel PRO/1000 Linux driver + * Copyright(c) 1999 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * Linux NICS <linux.nics@intel.com> + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ #ifndef _E1000E_PHY_H_ #define _E1000E_PHY_H_ @@ -171,6 +164,7 @@ s32 e1000_get_cable_length_82577(struct e1000_hw *hw); #define HV_M_STATUS_AUTONEG_COMPLETE 0x1000 #define HV_M_STATUS_SPEED_MASK 0x0300 #define HV_M_STATUS_SPEED_1000 0x0200 +#define HV_M_STATUS_SPEED_100 0x0100 #define HV_M_STATUS_LINK_UP 0x0040 #define IGP01E1000_PHY_PCS_INIT_REG 0x00B4 diff --git a/drivers/net/ethernet/intel/e1000e/ptp.c b/drivers/net/ethernet/intel/e1000e/ptp.c index 065f8c80d4f..fb1a914a3ad 100644 --- a/drivers/net/ethernet/intel/e1000e/ptp.c +++ b/drivers/net/ethernet/intel/e1000e/ptp.c @@ -1,30 +1,23 @@ -/******************************************************************************* - - Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2013 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - Linux NICS <linux.nics@intel.com> - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +/* Intel PRO/1000 Linux driver + * Copyright(c) 1999 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * Linux NICS <linux.nics@intel.com> + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ /* PTP 1588 Hardware Clock (PHC) * Derived from PTP Hardware Clock driver for Intel 82576 and 82580 (igb) @@ -47,6 +40,7 @@ static int e1000e_phc_adjfreq(struct ptp_clock_info *ptp, s32 delta) ptp_clock_info); struct e1000_hw *hw = &adapter->hw; bool neg_adj = false; + unsigned long flags; u64 adjustment; u32 timinca, incvalue; s32 ret_val; @@ -64,6 +58,8 @@ static int e1000e_phc_adjfreq(struct ptp_clock_info *ptp, s32 delta) if (ret_val) return ret_val; + spin_lock_irqsave(&adapter->systim_lock, flags); + incvalue = timinca & E1000_TIMINCA_INCVALUE_MASK; adjustment = incvalue; @@ -77,6 +73,8 @@ static int e1000e_phc_adjfreq(struct ptp_clock_info *ptp, s32 delta) ew32(TIMINCA, timinca); + spin_unlock_irqrestore(&adapter->systim_lock, flags); + return 0; } @@ -191,6 +189,7 @@ static const struct ptp_clock_info e1000e_ptp_clock_info = { .n_alarm = 0, .n_ext_ts = 0, .n_per_out = 0, + .n_pins = 0, .pps = 0, .adjfreq = e1000e_phc_adjfreq, .adjtime = e1000e_phc_adjtime, diff --git a/drivers/net/ethernet/intel/e1000e/regs.h b/drivers/net/ethernet/intel/e1000e/regs.h index a7e6a3e3725..ea235bbe50d 100644 --- a/drivers/net/ethernet/intel/e1000e/regs.h +++ b/drivers/net/ethernet/intel/e1000e/regs.h @@ -1,30 +1,23 @@ -/******************************************************************************* - - Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2013 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - Linux NICS <linux.nics@intel.com> - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +/* Intel PRO/1000 Linux driver + * Copyright(c) 1999 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * Linux NICS <linux.nics@intel.com> + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ #ifndef _E1000E_REGS_H_ #define _E1000E_REGS_H_ @@ -39,6 +32,7 @@ #define E1000_SCTL 0x00024 /* SerDes Control - RW */ #define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */ #define E1000_FCAH 0x0002C /* Flow Control Address High -RW */ +#define E1000_FEXT 0x0002C /* Future Extended - RW */ #define E1000_FEXTNVM 0x00028 /* Future Extended NVM - RW */ #define E1000_FEXTNVM3 0x0003C /* Future Extended NVM 3 - RW */ #define E1000_FEXTNVM4 0x00024 /* Future Extended NVM 4 - RW */ |