diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/netdev.c')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/netdev.c | 3028 |
1 files changed, 1881 insertions, 1147 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 3911401ed65..201cc93f362 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -1,30 +1,23 @@ -/******************************************************************************* - - Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2011 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - Linux NICS <linux.nics@intel.com> - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +/* Intel PRO/1000 Linux driver + * Copyright(c) 1999 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * Linux NICS <linux.nics@intel.com> + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt @@ -42,7 +35,6 @@ #include <linux/slab.h> #include <net/checksum.h> #include <net/ip6_checksum.h> -#include <linux/mii.h> #include <linux/ethtool.h> #include <linux/if_vlan.h> #include <linux/cpu.h> @@ -56,11 +48,14 @@ #define DRV_EXTRAVERSION "-k" -#define DRV_VERSION "1.5.1" DRV_EXTRAVERSION +#define DRV_VERSION "2.3.2" DRV_EXTRAVERSION char e1000e_driver_name[] = "e1000e"; const char e1000e_driver_version[] = DRV_VERSION; -static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state); +#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK) +static int debug = -1; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); static const struct e1000_info *e1000_info_tbl[] = { [board_82571] = &e1000_82571_info, @@ -74,6 +69,7 @@ static const struct e1000_info *e1000_info_tbl[] = { [board_ich10lan] = &e1000_ich10_info, [board_pchlan] = &e1000_pch_info, [board_pch2lan] = &e1000_pch2_info, + [board_pch_lpt] = &e1000_pch_lpt_info, }; struct e1000_reg_info { @@ -81,20 +77,7 @@ struct e1000_reg_info { char *name; }; -#define E1000_RDFH 0x02410 /* Rx Data FIFO Head - RW */ -#define E1000_RDFT 0x02418 /* Rx Data FIFO Tail - RW */ -#define E1000_RDFHS 0x02420 /* Rx Data FIFO Head Saved - RW */ -#define E1000_RDFTS 0x02428 /* Rx Data FIFO Tail Saved - RW */ -#define E1000_RDFPC 0x02430 /* Rx Data FIFO Packet Count - RW */ - -#define E1000_TDFH 0x03410 /* Tx Data FIFO Head - RW */ -#define E1000_TDFT 0x03418 /* Tx Data FIFO Tail - RW */ -#define E1000_TDFHS 0x03420 /* Tx Data FIFO Head Saved - RW */ -#define E1000_TDFTS 0x03428 /* Tx Data FIFO Tail Saved - RW */ -#define E1000_TDFPC 0x03430 /* Tx Data FIFO Packet Count - RW */ - static const struct e1000_reg_info e1000_reg_info_tbl[] = { - /* General Registers */ {E1000_CTRL, "CTRL"}, {E1000_STATUS, "STATUS"}, @@ -105,14 +88,14 @@ static const struct e1000_reg_info e1000_reg_info_tbl[] = { /* Rx Registers */ {E1000_RCTL, "RCTL"}, - {E1000_RDLEN, "RDLEN"}, - {E1000_RDH, "RDH"}, - {E1000_RDT, "RDT"}, + {E1000_RDLEN(0), "RDLEN"}, + {E1000_RDH(0), "RDH"}, + {E1000_RDT(0), "RDT"}, {E1000_RDTR, "RDTR"}, {E1000_RXDCTL(0), "RXDCTL"}, {E1000_ERT, "ERT"}, - {E1000_RDBAL, "RDBAL"}, - {E1000_RDBAH, "RDBAH"}, + {E1000_RDBAL(0), "RDBAL"}, + {E1000_RDBAH(0), "RDBAH"}, {E1000_RDFH, "RDFH"}, {E1000_RDFT, "RDFT"}, {E1000_RDFHS, "RDFHS"}, @@ -121,11 +104,11 @@ static const struct e1000_reg_info e1000_reg_info_tbl[] = { /* Tx Registers */ {E1000_TCTL, "TCTL"}, - {E1000_TDBAL, "TDBAL"}, - {E1000_TDBAH, "TDBAH"}, - {E1000_TDLEN, "TDLEN"}, - {E1000_TDH, "TDH"}, - {E1000_TDT, "TDT"}, + {E1000_TDBAL(0), "TDBAL"}, + {E1000_TDBAH(0), "TDBAH"}, + {E1000_TDLEN(0), "TDLEN"}, + {E1000_TDH(0), "TDH"}, + {E1000_TDT(0), "TDT"}, {E1000_TIDV, "TIDV"}, {E1000_TXDCTL(0), "TXDCTL"}, {E1000_TADV, "TADV"}, @@ -137,12 +120,44 @@ static const struct e1000_reg_info e1000_reg_info_tbl[] = { {E1000_TDFPC, "TDFPC"}, /* List Terminator */ - {} + {0, NULL} }; -/* +/** + * __ew32_prepare - prepare to write to MAC CSR register on certain parts + * @hw: pointer to the HW structure + * + * When updating the MAC CSR registers, the Manageability Engine (ME) could + * be accessing the registers at the same time. Normally, this is handled in + * h/w by an arbiter but on some parts there is a bug that acknowledges Host + * accesses later than it should which could result in the register to have + * an incorrect value. Workaround this by checking the FWSM register which + * has bit 24 set while ME is accessing MAC CSR registers, wait if it is set + * and try again a number of times. + **/ +s32 __ew32_prepare(struct e1000_hw *hw) +{ + s32 i = E1000_ICH_FWSM_PCIM2PCI_COUNT; + + while ((er32(FWSM) & E1000_ICH_FWSM_PCIM2PCI) && --i) + udelay(50); + + return i; +} + +void __ew32(struct e1000_hw *hw, unsigned long reg, u32 val) +{ + if (hw->adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) + __ew32_prepare(hw); + + writel(val, hw->hw_addr + reg); +} + +/** * e1000_regdump - register printout routine - */ + * @hw: pointer to the HW structure + * @reginfo: pointer to the register info table + **/ static void e1000_regdump(struct e1000_hw *hw, struct e1000_reg_info *reginfo) { int n = 0; @@ -172,9 +187,28 @@ static void e1000_regdump(struct e1000_hw *hw, struct e1000_reg_info *reginfo) pr_info("%-15s %08x %08x\n", rname, regs[0], regs[1]); } -/* +static void e1000e_dump_ps_pages(struct e1000_adapter *adapter, + struct e1000_buffer *bi) +{ + int i; + struct e1000_ps_page *ps_page; + + for (i = 0; i < adapter->rx_ps_pages; i++) { + ps_page = &bi->ps_pages[i]; + + if (ps_page->page) { + pr_info("packet dump for ps_page %d:\n", i); + print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, + 16, 1, page_address(ps_page->page), + PAGE_SIZE, true); + } + } +} + +/** * e1000e_dump - Print registers, Tx-ring and Rx-ring - */ + * @adapter: board private structure + **/ static void e1000e_dump(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; @@ -183,18 +217,18 @@ static void e1000e_dump(struct e1000_adapter *adapter) struct e1000_ring *tx_ring = adapter->tx_ring; struct e1000_tx_desc *tx_desc; struct my_u0 { - u64 a; - u64 b; + __le64 a; + __le64 b; } *u0; struct e1000_buffer *buffer_info; struct e1000_ring *rx_ring = adapter->rx_ring; union e1000_rx_desc_packet_split *rx_desc_ps; union e1000_rx_desc_extended *rx_desc; struct my_u1 { - u64 a; - u64 b; - u64 c; - u64 d; + __le64 a; + __le64 b; + __le64 c; + __le64 d; } *u1; u32 staterr; int i = 0; @@ -206,9 +240,8 @@ static void e1000e_dump(struct e1000_adapter *adapter) if (netdev) { dev_info(&adapter->pdev->dev, "Net device Info\n"); pr_info("Device Name state trans_start last_rx\n"); - pr_info("%-15s %016lX %016lX %016lX\n", - netdev->name, netdev->state, netdev->trans_start, - netdev->last_rx); + pr_info("%-15s %016lX %016lX %016lX\n", netdev->name, + netdev->state, netdev->trans_start, netdev->last_rx); } /* Print Registers */ @@ -221,7 +254,7 @@ static void e1000e_dump(struct e1000_adapter *adapter) /* Print Tx Ring Summary */ if (!netdev || !netif_running(netdev)) - goto exit; + return; dev_info(&adapter->pdev->dev, "Tx Ring Summary\n"); pr_info("Queue [NTU] [NTC] [bi(ntc)->dma ] leng ntw timestamp\n"); @@ -293,10 +326,10 @@ static void e1000e_dump(struct e1000_adapter *adapter) (unsigned long long)buffer_info->time_stamp, buffer_info->skb, next_desc); - if (netif_msg_pktdata(adapter) && buffer_info->dma != 0) + if (netif_msg_pktdata(adapter) && buffer_info->skb) print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, - 16, 1, phys_to_virt(buffer_info->dma), - buffer_info->length, true); + 16, 1, buffer_info->skb->data, + buffer_info->skb->len, true); } /* Print Rx Ring Summary */ @@ -308,7 +341,7 @@ rx_ring_summary: /* Print Rx Ring */ if (!netif_msg_rx_status(adapter)) - goto exit; + return; dev_info(&adapter->pdev->dev, "Rx Ring Dump\n"); switch (adapter->rx_ps_pages) { @@ -375,10 +408,8 @@ rx_ring_summary: buffer_info->skb, next_desc); if (netif_msg_pktdata(adapter)) - print_hex_dump(KERN_INFO, "", - DUMP_PREFIX_ADDRESS, 16, 1, - phys_to_virt(buffer_info->dma), - adapter->rx_ps_bsize0, true); + e1000e_dump_ps_pages(adapter, + buffer_info); } } break; @@ -438,20 +469,17 @@ rx_ring_summary: (unsigned long long)buffer_info->dma, buffer_info->skb, next_desc); - if (netif_msg_pktdata(adapter)) + if (netif_msg_pktdata(adapter) && + buffer_info->skb) print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, 16, 1, - phys_to_virt - (buffer_info->dma), + buffer_info->skb->data, adapter->rx_buffer_len, true); } } } - -exit: - return; } /** @@ -466,45 +494,117 @@ static int e1000_desc_unused(struct e1000_ring *ring) } /** + * e1000e_systim_to_hwtstamp - convert system time value to hw time stamp + * @adapter: board private structure + * @hwtstamps: time stamp structure to update + * @systim: unsigned 64bit system time value. + * + * Convert the system time value stored in the RX/TXSTMP registers into a + * hwtstamp which can be used by the upper level time stamping functions. + * + * The 'systim_lock' spinlock is used to protect the consistency of the + * system time value. This is needed because reading the 64 bit time + * value involves reading two 32 bit registers. The first read latches the + * value. + **/ +static void e1000e_systim_to_hwtstamp(struct e1000_adapter *adapter, + struct skb_shared_hwtstamps *hwtstamps, + u64 systim) +{ + u64 ns; + unsigned long flags; + + spin_lock_irqsave(&adapter->systim_lock, flags); + ns = timecounter_cyc2time(&adapter->tc, systim); + spin_unlock_irqrestore(&adapter->systim_lock, flags); + + memset(hwtstamps, 0, sizeof(*hwtstamps)); + hwtstamps->hwtstamp = ns_to_ktime(ns); +} + +/** + * e1000e_rx_hwtstamp - utility function which checks for Rx time stamp + * @adapter: board private structure + * @status: descriptor extended error and status field + * @skb: particular skb to include time stamp + * + * If the time stamp is valid, convert it into the timecounter ns value + * and store that result into the shhwtstamps structure which is passed + * up the network stack. + **/ +static void e1000e_rx_hwtstamp(struct e1000_adapter *adapter, u32 status, + struct sk_buff *skb) +{ + struct e1000_hw *hw = &adapter->hw; + u64 rxstmp; + + if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP) || + !(status & E1000_RXDEXT_STATERR_TST) || + !(er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID)) + return; + + /* The Rx time stamp registers contain the time stamp. No other + * received packet will be time stamped until the Rx time stamp + * registers are read. Because only one packet can be time stamped + * at a time, the register values must belong to this packet and + * therefore none of the other additional attributes need to be + * compared. + */ + rxstmp = (u64)er32(RXSTMPL); + rxstmp |= (u64)er32(RXSTMPH) << 32; + e1000e_systim_to_hwtstamp(adapter, skb_hwtstamps(skb), rxstmp); + + adapter->flags2 &= ~FLAG2_CHECK_RX_HWTSTAMP; +} + +/** * e1000_receive_skb - helper function to handle Rx indications * @adapter: board private structure - * @status: descriptor status field as written by hardware + * @staterr: descriptor extended error and status field as written by hardware * @vlan: descriptor vlan field as written by hardware (no le/be conversion) * @skb: pointer to sk_buff to be indicated to stack **/ static void e1000_receive_skb(struct e1000_adapter *adapter, struct net_device *netdev, struct sk_buff *skb, - u8 status, __le16 vlan) + u32 staterr, __le16 vlan) { u16 tag = le16_to_cpu(vlan); + + e1000e_rx_hwtstamp(adapter, staterr, skb); + skb->protocol = eth_type_trans(skb, netdev); - if (status & E1000_RXD_STAT_VP) - __vlan_hwaccel_put_tag(skb, tag); + if (staterr & E1000_RXD_STAT_VP) + __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), tag); napi_gro_receive(&adapter->napi, skb); } /** * e1000_rx_checksum - Receive Checksum Offload - * @adapter: board private structure - * @status_err: receive descriptor status and error fields - * @csum: receive descriptor csum field - * @sk_buff: socket buffer with received data + * @adapter: board private structure + * @status_err: receive descriptor status and error fields + * @csum: receive descriptor csum field + * @sk_buff: socket buffer with received data **/ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err, - u32 csum, struct sk_buff *skb) + struct sk_buff *skb) { u16 status = (u16)status_err; u8 errors = (u8)(status_err >> 24); skb_checksum_none_assert(skb); + /* Rx checksum disabled */ + if (!(adapter->netdev->features & NETIF_F_RXCSUM)) + return; + /* Ignore Checksum bit is set */ if (status & E1000_RXD_STAT_IXSM) return; - /* TCP/UDP checksum error bit is set */ - if (errors & E1000_RXD_ERR_TCPE) { + + /* TCP/UDP checksum error bit or IP checksum error bit is set */ + if (errors & (E1000_RXD_ERR_TCPE | E1000_RXD_ERR_IPE)) { /* let the stack verify checksum errors */ adapter->hw_csum_err++; return; @@ -515,73 +615,38 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err, return; /* It must be a TCP or UDP packet with a valid checksum */ - if (status & E1000_RXD_STAT_TCPCS) { - /* TCP checksum is good */ - skb->ip_summed = CHECKSUM_UNNECESSARY; - } else { - /* - * IP fragment with UDP payload - * Hardware complements the payload checksum, so we undo it - * and then put the value in host order for further stack use. - */ - __sum16 sum = (__force __sum16)htons(csum); - skb->csum = csum_unfold(~sum); - skb->ip_summed = CHECKSUM_COMPLETE; - } + skb->ip_summed = CHECKSUM_UNNECESSARY; adapter->hw_csum_good++; } -/** - * e1000e_update_tail_wa - helper function for e1000e_update_[rt]dt_wa() - * @hw: pointer to the HW structure - * @tail: address of tail descriptor register - * @i: value to write to tail descriptor register - * - * When updating the tail register, the ME could be accessing Host CSR - * registers at the same time. Normally, this is handled in h/w by an - * arbiter but on some parts there is a bug that acknowledges Host accesses - * later than it should which could result in the descriptor register to - * have an incorrect value. Workaround this by checking the FWSM register - * which has bit 24 set while ME is accessing Host CSR registers, wait - * if it is set and try again a number of times. - **/ -static inline s32 e1000e_update_tail_wa(struct e1000_hw *hw, u8 __iomem * tail, - unsigned int i) -{ - unsigned int j = 0; - - while ((j++ < E1000_ICH_FWSM_PCIM2PCI_COUNT) && - (er32(FWSM) & E1000_ICH_FWSM_PCIM2PCI)) - udelay(50); - - writel(i, tail); - - if ((j == E1000_ICH_FWSM_PCIM2PCI_COUNT) && (i != readl(tail))) - return E1000_ERR_SWFW_SYNC; - - return 0; -} - -static void e1000e_update_rdt_wa(struct e1000_adapter *adapter, unsigned int i) +static void e1000e_update_rdt_wa(struct e1000_ring *rx_ring, unsigned int i) { - u8 __iomem *tail = (adapter->hw.hw_addr + adapter->rx_ring->tail); + struct e1000_adapter *adapter = rx_ring->adapter; struct e1000_hw *hw = &adapter->hw; + s32 ret_val = __ew32_prepare(hw); + + writel(i, rx_ring->tail); - if (e1000e_update_tail_wa(hw, tail, i)) { + if (unlikely(!ret_val && (i != readl(rx_ring->tail)))) { u32 rctl = er32(RCTL); + ew32(RCTL, rctl & ~E1000_RCTL_EN); e_err("ME firmware caused invalid RDT - resetting\n"); schedule_work(&adapter->reset_task); } } -static void e1000e_update_tdt_wa(struct e1000_adapter *adapter, unsigned int i) +static void e1000e_update_tdt_wa(struct e1000_ring *tx_ring, unsigned int i) { - u8 __iomem *tail = (adapter->hw.hw_addr + adapter->tx_ring->tail); + struct e1000_adapter *adapter = tx_ring->adapter; struct e1000_hw *hw = &adapter->hw; + s32 ret_val = __ew32_prepare(hw); - if (e1000e_update_tail_wa(hw, tail, i)) { + writel(i, tx_ring->tail); + + if (unlikely(!ret_val && (i != readl(tx_ring->tail)))) { u32 tctl = er32(TCTL); + ew32(TCTL, tctl & ~E1000_TCTL_EN); e_err("ME firmware caused invalid TDT - resetting\n"); schedule_work(&adapter->reset_task); @@ -590,14 +655,14 @@ static void e1000e_update_tdt_wa(struct e1000_adapter *adapter, unsigned int i) /** * e1000_alloc_rx_buffers - Replace used receive buffers - * @adapter: address of board private structure + * @rx_ring: Rx descriptor ring **/ -static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter, +static void e1000_alloc_rx_buffers(struct e1000_ring *rx_ring, int cleaned_count, gfp_t gfp) { + struct e1000_adapter *adapter = rx_ring->adapter; struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; - struct e1000_ring *rx_ring = adapter->rx_ring; union e1000_rx_desc_extended *rx_desc; struct e1000_buffer *buffer_info; struct sk_buff *skb; @@ -636,17 +701,16 @@ map_skb: rx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma); if (unlikely(!(i & (E1000_RX_BUFFER_WRITE - 1)))) { - /* - * Force memory writes to complete before letting h/w + /* Force memory writes to complete before letting h/w * know there are new descriptors to fetch. (Only * applicable for weak-ordered memory model archs, * such as IA-64). */ wmb(); if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) - e1000e_update_rdt_wa(adapter, i); + e1000e_update_rdt_wa(rx_ring, i); else - writel(i, adapter->hw.hw_addr + rx_ring->tail); + writel(i, rx_ring->tail); } i++; if (i == rx_ring->count) @@ -659,15 +723,15 @@ map_skb: /** * e1000_alloc_rx_buffers_ps - Replace used receive buffers; packet split - * @adapter: address of board private structure + * @rx_ring: Rx descriptor ring **/ -static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, +static void e1000_alloc_rx_buffers_ps(struct e1000_ring *rx_ring, int cleaned_count, gfp_t gfp) { + struct e1000_adapter *adapter = rx_ring->adapter; struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; union e1000_rx_desc_packet_split *rx_desc; - struct e1000_ring *rx_ring = adapter->rx_ring; struct e1000_buffer *buffer_info; struct e1000_ps_page *ps_page; struct sk_buff *skb; @@ -705,8 +769,7 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, goto no_buffers; } } - /* - * Refresh the desc even if buffer_addrs + /* Refresh the desc even if buffer_addrs * didn't change because each write-back * erases this info. */ @@ -714,8 +777,7 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, cpu_to_le64(ps_page->dma); } - skb = __netdev_alloc_skb_ip_align(netdev, - adapter->rx_ps_bsize0, + skb = __netdev_alloc_skb_ip_align(netdev, adapter->rx_ps_bsize0, gfp); if (!skb) { @@ -739,18 +801,16 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma); if (unlikely(!(i & (E1000_RX_BUFFER_WRITE - 1)))) { - /* - * Force memory writes to complete before letting h/w + /* Force memory writes to complete before letting h/w * know there are new descriptors to fetch. (Only * applicable for weak-ordered memory model archs, * such as IA-64). */ wmb(); if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) - e1000e_update_rdt_wa(adapter, i << 1); + e1000e_update_rdt_wa(rx_ring, i << 1); else - writel(i << 1, - adapter->hw.hw_addr + rx_ring->tail); + writel(i << 1, rx_ring->tail); } i++; @@ -765,21 +825,21 @@ no_buffers: /** * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers - * @adapter: address of board private structure + * @rx_ring: Rx descriptor ring * @cleaned_count: number of buffers to allocate this pass **/ -static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter, +static void e1000_alloc_jumbo_rx_buffers(struct e1000_ring *rx_ring, int cleaned_count, gfp_t gfp) { + struct e1000_adapter *adapter = rx_ring->adapter; struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; union e1000_rx_desc_extended *rx_desc; - struct e1000_ring *rx_ring = adapter->rx_ring; struct e1000_buffer *buffer_info; struct sk_buff *skb; unsigned int i; - unsigned int bufsz = 256 - 16 /* for skb_reserve */; + unsigned int bufsz = 256 - 16; /* for skb_reserve */ i = rx_ring->next_to_use; buffer_info = &rx_ring->buffer_info[i]; @@ -809,11 +869,16 @@ check_page: } } - if (!buffer_info->dma) + if (!buffer_info->dma) { buffer_info->dma = dma_map_page(&pdev->dev, - buffer_info->page, 0, - PAGE_SIZE, + buffer_info->page, 0, + PAGE_SIZE, DMA_FROM_DEVICE); + if (dma_mapping_error(&pdev->dev, buffer_info->dma)) { + adapter->alloc_rx_buff_failed++; + break; + } + } rx_desc = E1000_RX_DESC_EXT(*rx_ring, i); rx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma); @@ -831,29 +896,37 @@ check_page: /* Force memory writes to complete before letting h/w * know there are new descriptors to fetch. (Only * applicable for weak-ordered memory model archs, - * such as IA-64). */ + * such as IA-64). + */ wmb(); if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) - e1000e_update_rdt_wa(adapter, i); + e1000e_update_rdt_wa(rx_ring, i); else - writel(i, adapter->hw.hw_addr + rx_ring->tail); + writel(i, rx_ring->tail); } } +static inline void e1000_rx_hash(struct net_device *netdev, __le32 rss, + struct sk_buff *skb) +{ + if (netdev->features & NETIF_F_RXHASH) + skb_set_hash(skb, le32_to_cpu(rss), PKT_HASH_TYPE_L3); +} + /** - * e1000_clean_rx_irq - Send received data up the network stack; legacy - * @adapter: board private structure + * e1000_clean_rx_irq - Send received data up the network stack + * @rx_ring: Rx descriptor ring * * the return value indicates whether actual cleaning was done, there * is no guarantee that everything was cleaned **/ -static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, - int *work_done, int work_to_do) +static bool e1000_clean_rx_irq(struct e1000_ring *rx_ring, int *work_done, + int work_to_do) { + struct e1000_adapter *adapter = rx_ring->adapter; struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; struct e1000_hw *hw = &adapter->hw; - struct e1000_ring *rx_ring = adapter->rx_ring; union e1000_rx_desc_extended *rx_desc, *next_rxd; struct e1000_buffer *buffer_info, *next_buffer; u32 length, staterr; @@ -890,16 +963,13 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, cleaned = true; cleaned_count++; - dma_unmap_single(&pdev->dev, - buffer_info->dma, - adapter->rx_buffer_len, - DMA_FROM_DEVICE); + dma_unmap_single(&pdev->dev, buffer_info->dma, + adapter->rx_buffer_len, DMA_FROM_DEVICE); buffer_info->dma = 0; length = le16_to_cpu(rx_desc->wb.upper.length); - /* - * !EOP means multiple descriptors were used to store a single + /* !EOP means multiple descriptors were used to store a single * packet, if that's the case we need to toss it. In fact, we * need to toss every packet with the EOP bit clear and the * next frame that _does_ have the EOP bit set, as it is by @@ -918,21 +988,29 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, goto next_desc; } - if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) { + if (unlikely((staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) && + !(netdev->features & NETIF_F_RXALL))) { /* recycle */ buffer_info->skb = skb; goto next_desc; } /* adjust length to remove Ethernet CRC */ - if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) - length -= 4; + if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) { + /* If configured to store CRC, don't subtract FCS, + * but keep the FCS bytes out of the total_rx_bytes + * counter + */ + if (netdev->features & NETIF_F_RXFCS) + total_rx_bytes -= 4; + else + length -= 4; + } total_rx_bytes += length; total_rx_packets++; - /* - * code added for copybreak, this should improve + /* code added for copybreak, this should improve * performance for small packets with large amounts * of reassembly being done in the stack */ @@ -956,9 +1034,9 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, skb_put(skb, length); /* Receive Checksum Offload */ - e1000_rx_checksum(adapter, staterr, - le16_to_cpu(rx_desc->wb.lower.hi_dword. - csum_ip.csum), skb); + e1000_rx_checksum(adapter, staterr, skb); + + e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb); e1000_receive_skb(adapter, netdev, skb, staterr, rx_desc->wb.upper.vlan); @@ -968,7 +1046,7 @@ next_desc: /* return some buffers to hardware, one at a time is too slow */ if (cleaned_count >= E1000_RX_BUFFER_WRITE) { - adapter->alloc_rx_buf(adapter, cleaned_count, + adapter->alloc_rx_buf(rx_ring, cleaned_count, GFP_ATOMIC); cleaned_count = 0; } @@ -983,16 +1061,18 @@ next_desc: cleaned_count = e1000_desc_unused(rx_ring); if (cleaned_count) - adapter->alloc_rx_buf(adapter, cleaned_count, GFP_ATOMIC); + adapter->alloc_rx_buf(rx_ring, cleaned_count, GFP_ATOMIC); adapter->total_rx_bytes += total_rx_bytes; adapter->total_rx_packets += total_rx_packets; return cleaned; } -static void e1000_put_txbuf(struct e1000_adapter *adapter, - struct e1000_buffer *buffer_info) +static void e1000_put_txbuf(struct e1000_ring *tx_ring, + struct e1000_buffer *buffer_info) { + struct e1000_adapter *adapter = tx_ring->adapter; + if (buffer_info->dma) { if (buffer_info->mapped_as_page) dma_unmap_page(&adapter->pdev->dev, buffer_info->dma, @@ -1012,8 +1092,8 @@ static void e1000_put_txbuf(struct e1000_adapter *adapter, static void e1000_print_hw_hang(struct work_struct *work) { struct e1000_adapter *adapter = container_of(work, - struct e1000_adapter, - print_hang_task); + struct e1000_adapter, + print_hang_task); struct net_device *netdev = adapter->netdev; struct e1000_ring *tx_ring = adapter->tx_ring; unsigned int i = tx_ring->next_to_clean; @@ -1026,24 +1106,35 @@ static void e1000_print_hw_hang(struct work_struct *work) if (test_bit(__E1000_DOWN, &adapter->state)) return; - if (!adapter->tx_hang_recheck && - (adapter->flags2 & FLAG2_DMA_BURST)) { + if (!adapter->tx_hang_recheck && (adapter->flags2 & FLAG2_DMA_BURST)) { /* May be block on write-back, flush and detect again * flush pending descriptor writebacks to memory */ ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD); /* execute the writes immediately */ e1e_flush(); + /* Due to rare timing issues, write to TIDV again to ensure + * the write is successful + */ + ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD); + /* execute the writes immediately */ + e1e_flush(); adapter->tx_hang_recheck = true; return; } - /* Real hang detected */ adapter->tx_hang_recheck = false; + + if (er32(TDH(0)) == er32(TDT(0))) { + e_dbg("false hang detected, ignoring\n"); + return; + } + + /* Real hang detected */ netif_stop_queue(netdev); - e1e_rphy(hw, PHY_STATUS, &phy_status); - e1e_rphy(hw, PHY_1000T_STATUS, &phy_1000t_status); - e1e_rphy(hw, PHY_EXT_STATUS, &phy_ext_status); + e1e_rphy(hw, MII_BMSR, &phy_status); + e1e_rphy(hw, MII_STAT1000, &phy_1000t_status); + e1e_rphy(hw, MII_ESTATUS, &phy_ext_status); pci_read_config_word(adapter->pdev, PCI_STATUS, &pci_status); @@ -1063,33 +1154,68 @@ static void e1000_print_hw_hang(struct work_struct *work) "PHY 1000BASE-T Status <%x>\n" "PHY Extended Status <%x>\n" "PCI Status <%x>\n", - readl(adapter->hw.hw_addr + tx_ring->head), - readl(adapter->hw.hw_addr + tx_ring->tail), - tx_ring->next_to_use, - tx_ring->next_to_clean, - tx_ring->buffer_info[eop].time_stamp, - eop, - jiffies, - eop_desc->upper.fields.status, - er32(STATUS), - phy_status, - phy_1000t_status, - phy_ext_status, - pci_status); + readl(tx_ring->head), readl(tx_ring->tail), tx_ring->next_to_use, + tx_ring->next_to_clean, tx_ring->buffer_info[eop].time_stamp, + eop, jiffies, eop_desc->upper.fields.status, er32(STATUS), + phy_status, phy_1000t_status, phy_ext_status, pci_status); + + e1000e_dump(adapter); + + /* Suggest workaround for known h/w issue */ + if ((hw->mac.type == e1000_pchlan) && (er32(CTRL) & E1000_CTRL_TFCE)) + e_err("Try turning off Tx pause (flow control) via ethtool\n"); +} + +/** + * e1000e_tx_hwtstamp_work - check for Tx time stamp + * @work: pointer to work struct + * + * This work function polls the TSYNCTXCTL valid bit to determine when a + * timestamp has been taken for the current stored skb. The timestamp must + * be for this skb because only one such packet is allowed in the queue. + */ +static void e1000e_tx_hwtstamp_work(struct work_struct *work) +{ + struct e1000_adapter *adapter = container_of(work, struct e1000_adapter, + tx_hwtstamp_work); + struct e1000_hw *hw = &adapter->hw; + + if (er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_VALID) { + struct skb_shared_hwtstamps shhwtstamps; + u64 txstmp; + + txstmp = er32(TXSTMPL); + txstmp |= (u64)er32(TXSTMPH) << 32; + + e1000e_systim_to_hwtstamp(adapter, &shhwtstamps, txstmp); + + skb_tstamp_tx(adapter->tx_hwtstamp_skb, &shhwtstamps); + dev_kfree_skb_any(adapter->tx_hwtstamp_skb); + adapter->tx_hwtstamp_skb = NULL; + } else if (time_after(jiffies, adapter->tx_hwtstamp_start + + adapter->tx_timeout_factor * HZ)) { + dev_kfree_skb_any(adapter->tx_hwtstamp_skb); + adapter->tx_hwtstamp_skb = NULL; + adapter->tx_hwtstamp_timeouts++; + e_warn("clearing Tx timestamp hang\n"); + } else { + /* reschedule to check later */ + schedule_work(&adapter->tx_hwtstamp_work); + } } /** * e1000_clean_tx_irq - Reclaim resources after transmit completes - * @adapter: board private structure + * @tx_ring: Tx descriptor ring * * the return value indicates whether actual cleaning was done, there * is no guarantee that everything was cleaned **/ -static bool e1000_clean_tx_irq(struct e1000_adapter *adapter) +static bool e1000_clean_tx_irq(struct e1000_ring *tx_ring) { + struct e1000_adapter *adapter = tx_ring->adapter; struct net_device *netdev = adapter->netdev; struct e1000_hw *hw = &adapter->hw; - struct e1000_ring *tx_ring = adapter->tx_ring; struct e1000_tx_desc *tx_desc, *eop_desc; struct e1000_buffer *buffer_info; unsigned int i, eop; @@ -1104,7 +1230,8 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter) while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) && (count < tx_ring->count)) { bool cleaned = false; - rmb(); /* read buffer_info after eop_desc */ + + rmb(); /* read buffer_info after eop_desc */ for (; !cleaned; count++) { tx_desc = E1000_TX_DESC(*tx_ring, i); buffer_info = &tx_ring->buffer_info[i]; @@ -1119,7 +1246,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter) } } - e1000_put_txbuf(adapter, buffer_info); + e1000_put_txbuf(tx_ring, buffer_info); tx_desc->upper.data = 0; i++; @@ -1153,8 +1280,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter) } if (adapter->detect_tx_hung) { - /* - * Detect a transmit hang in hardware, this serializes the + /* Detect a transmit hang in hardware, this serializes the * check with the clearing of time_stamp and movement of i */ adapter->detect_tx_hung = false; @@ -1173,19 +1299,19 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter) /** * e1000_clean_rx_irq_ps - Send received data up the network stack; packet split - * @adapter: board private structure + * @rx_ring: Rx descriptor ring * * the return value indicates whether actual cleaning was done, there * is no guarantee that everything was cleaned **/ -static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, - int *work_done, int work_to_do) +static bool e1000_clean_rx_irq_ps(struct e1000_ring *rx_ring, int *work_done, + int work_to_do) { + struct e1000_adapter *adapter = rx_ring->adapter; struct e1000_hw *hw = &adapter->hw; union e1000_rx_desc_packet_split *rx_desc, *next_rxd; struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; - struct e1000_ring *rx_ring = adapter->rx_ring; struct e1000_buffer *buffer_info, *next_buffer; struct e1000_ps_page *ps_page; struct sk_buff *skb; @@ -1236,7 +1362,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, goto next_desc; } - if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) { + if (unlikely((staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) && + !(netdev->features & NETIF_F_RXALL))) { dev_kfree_skb_irq(skb); goto next_desc; } @@ -1253,43 +1380,47 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, skb_put(skb, length); { - /* - * this looks ugly, but it seems compiler issues make it - * more efficient than reusing j - */ - int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]); - - /* - * page alloc/put takes too long and effects small packet - * throughput, so unsplit small packets and save the alloc/put - * only valid in softirq (napi) context to call kmap_* - */ - if (l1 && (l1 <= copybreak) && - ((length + l1) <= adapter->rx_ps_bsize0)) { - u8 *vaddr; - - ps_page = &buffer_info->ps_pages[0]; + /* this looks ugly, but it seems compiler issues make + * it more efficient than reusing j + */ + int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]); - /* - * there is no documentation about how to call - * kmap_atomic, so we can't hold the mapping - * very long + /* page alloc/put takes too long and effects small + * packet throughput, so unsplit small packets and + * save the alloc/put only valid in softirq (napi) + * context to call kmap_* */ - dma_sync_single_for_cpu(&pdev->dev, ps_page->dma, - PAGE_SIZE, DMA_FROM_DEVICE); - vaddr = kmap_atomic(ps_page->page, KM_SKB_DATA_SOFTIRQ); - memcpy(skb_tail_pointer(skb), vaddr, l1); - kunmap_atomic(vaddr, KM_SKB_DATA_SOFTIRQ); - dma_sync_single_for_device(&pdev->dev, ps_page->dma, - PAGE_SIZE, DMA_FROM_DEVICE); - - /* remove the CRC */ - if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) - l1 -= 4; - - skb_put(skb, l1); - goto copydone; - } /* if */ + if (l1 && (l1 <= copybreak) && + ((length + l1) <= adapter->rx_ps_bsize0)) { + u8 *vaddr; + + ps_page = &buffer_info->ps_pages[0]; + + /* there is no documentation about how to call + * kmap_atomic, so we can't hold the mapping + * very long + */ + dma_sync_single_for_cpu(&pdev->dev, + ps_page->dma, + PAGE_SIZE, + DMA_FROM_DEVICE); + vaddr = kmap_atomic(ps_page->page); + memcpy(skb_tail_pointer(skb), vaddr, l1); + kunmap_atomic(vaddr); + dma_sync_single_for_device(&pdev->dev, + ps_page->dma, + PAGE_SIZE, + DMA_FROM_DEVICE); + + /* remove the CRC */ + if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) { + if (!(netdev->features & NETIF_F_RXFCS)) + l1 -= 4; + } + + skb_put(skb, l1); + goto copydone; + } /* if */ } for (j = 0; j < PS_PAGE_BUFFERS; j++) { @@ -1311,22 +1442,25 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, /* strip the ethernet crc, problem is we're using pages now so * this whole operation can get a little cpu intensive */ - if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) - pskb_trim(skb, skb->len - 4); + if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) { + if (!(netdev->features & NETIF_F_RXFCS)) + pskb_trim(skb, skb->len - 4); + } copydone: total_rx_bytes += skb->len; total_rx_packets++; - e1000_rx_checksum(adapter, staterr, le16_to_cpu( - rx_desc->wb.lower.hi_dword.csum_ip.csum), skb); + e1000_rx_checksum(adapter, staterr, skb); + + e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb); if (rx_desc->wb.upper.header_status & - cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP)) + cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP)) adapter->rx_hdr_split++; - e1000_receive_skb(adapter, netdev, skb, - staterr, rx_desc->wb.middle.vlan); + e1000_receive_skb(adapter, netdev, skb, staterr, + rx_desc->wb.middle.vlan); next_desc: rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF); @@ -1334,7 +1468,7 @@ next_desc: /* return some buffers to hardware, one at a time is too slow */ if (cleaned_count >= E1000_RX_BUFFER_WRITE) { - adapter->alloc_rx_buf(adapter, cleaned_count, + adapter->alloc_rx_buf(rx_ring, cleaned_count, GFP_ATOMIC); cleaned_count = 0; } @@ -1349,7 +1483,7 @@ next_desc: cleaned_count = e1000_desc_unused(rx_ring); if (cleaned_count) - adapter->alloc_rx_buf(adapter, cleaned_count, GFP_ATOMIC); + adapter->alloc_rx_buf(rx_ring, cleaned_count, GFP_ATOMIC); adapter->total_rx_bytes += total_rx_bytes; adapter->total_rx_packets += total_rx_packets; @@ -1360,7 +1494,7 @@ next_desc: * e1000_consume_page - helper function **/ static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb, - u16 length) + u16 length) { bi->page = NULL; skb->len += length; @@ -1375,20 +1509,20 @@ static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb, * the return value indicates whether actual cleaning was done, there * is no guarantee that everything was cleaned **/ - -static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter, - int *work_done, int work_to_do) +static bool e1000_clean_jumbo_rx_irq(struct e1000_ring *rx_ring, int *work_done, + int work_to_do) { + struct e1000_adapter *adapter = rx_ring->adapter; struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; - struct e1000_ring *rx_ring = adapter->rx_ring; union e1000_rx_desc_extended *rx_desc, *next_rxd; struct e1000_buffer *buffer_info, *next_buffer; u32 length, staterr; unsigned int i; int cleaned_count = 0; bool cleaned = false; - unsigned int total_rx_bytes=0, total_rx_packets=0; + unsigned int total_rx_bytes = 0, total_rx_packets = 0; + struct skb_shared_info *shinfo; i = rx_ring->next_to_clean; rx_desc = E1000_RX_DESC_EXT(*rx_ring, i); @@ -1424,7 +1558,8 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter, /* errors is only valid for DD + EOP descriptors */ if (unlikely((staterr & E1000_RXD_STAT_EOP) && - (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK))) { + ((staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) && + !(netdev->features & NETIF_F_RXALL)))) { /* recycle both page and skb */ buffer_info->skb = skb; /* an error means any chain goes out the window too */ @@ -1433,7 +1568,6 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter, rx_ring->rx_skb_top = NULL; goto next_desc; } - #define rxtop (rx_ring->rx_skb_top) if (!(staterr & E1000_RXD_STAT_EOP)) { /* this descriptor is only the beginning (or middle) */ @@ -1441,12 +1575,13 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter, /* this is the beginning of a chain */ rxtop = skb; skb_fill_page_desc(rxtop, 0, buffer_info->page, - 0, length); + 0, length); } else { /* this is the middle of a chain */ - skb_fill_page_desc(rxtop, - skb_shinfo(rxtop)->nr_frags, - buffer_info->page, 0, length); + shinfo = skb_shinfo(rxtop); + skb_fill_page_desc(rxtop, shinfo->nr_frags, + buffer_info->page, 0, + length); /* re-use the skb, only consumed the page */ buffer_info->skb = skb; } @@ -1455,44 +1590,46 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter, } else { if (rxtop) { /* end of the chain */ - skb_fill_page_desc(rxtop, - skb_shinfo(rxtop)->nr_frags, - buffer_info->page, 0, length); + shinfo = skb_shinfo(rxtop); + skb_fill_page_desc(rxtop, shinfo->nr_frags, + buffer_info->page, 0, + length); /* re-use the current skb, we only consumed the - * page */ + * page + */ buffer_info->skb = skb; skb = rxtop; rxtop = NULL; e1000_consume_page(buffer_info, skb, length); } else { /* no chain, got EOP, this buf is the packet - * copybreak to save the put_page/alloc_page */ + * copybreak to save the put_page/alloc_page + */ if (length <= copybreak && skb_tailroom(skb) >= length) { u8 *vaddr; - vaddr = kmap_atomic(buffer_info->page, - KM_SKB_DATA_SOFTIRQ); + vaddr = kmap_atomic(buffer_info->page); memcpy(skb_tail_pointer(skb), vaddr, length); - kunmap_atomic(vaddr, - KM_SKB_DATA_SOFTIRQ); + kunmap_atomic(vaddr); /* re-use the page, so don't erase - * buffer_info->page */ + * buffer_info->page + */ skb_put(skb, length); } else { skb_fill_page_desc(skb, 0, - buffer_info->page, 0, - length); + buffer_info->page, 0, + length); e1000_consume_page(buffer_info, skb, - length); + length); } } } - /* Receive Checksum Offload XXX recompute due to CRC strip? */ - e1000_rx_checksum(adapter, staterr, - le16_to_cpu(rx_desc->wb.lower.hi_dword. - csum_ip.csum), skb); + /* Receive Checksum Offload */ + e1000_rx_checksum(adapter, staterr, skb); + + e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb); /* probably a little skewed due to removing CRC */ total_rx_bytes += skb->len; @@ -1513,7 +1650,7 @@ next_desc: /* return some buffers to hardware, one at a time is too slow */ if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) { - adapter->alloc_rx_buf(adapter, cleaned_count, + adapter->alloc_rx_buf(rx_ring, cleaned_count, GFP_ATOMIC); cleaned_count = 0; } @@ -1528,7 +1665,7 @@ next_desc: cleaned_count = e1000_desc_unused(rx_ring); if (cleaned_count) - adapter->alloc_rx_buf(adapter, cleaned_count, GFP_ATOMIC); + adapter->alloc_rx_buf(rx_ring, cleaned_count, GFP_ATOMIC); adapter->total_rx_bytes += total_rx_bytes; adapter->total_rx_packets += total_rx_packets; @@ -1537,11 +1674,11 @@ next_desc: /** * e1000_clean_rx_ring - Free Rx Buffers per Queue - * @adapter: board private structure + * @rx_ring: Rx descriptor ring **/ -static void e1000_clean_rx_ring(struct e1000_adapter *adapter) +static void e1000_clean_rx_ring(struct e1000_ring *rx_ring) { - struct e1000_ring *rx_ring = adapter->rx_ring; + struct e1000_adapter *adapter = rx_ring->adapter; struct e1000_buffer *buffer_info; struct e1000_ps_page *ps_page; struct pci_dev *pdev = adapter->pdev; @@ -1557,8 +1694,7 @@ static void e1000_clean_rx_ring(struct e1000_adapter *adapter) DMA_FROM_DEVICE); else if (adapter->clean_rx == e1000_clean_jumbo_rx_irq) dma_unmap_page(&pdev->dev, buffer_info->dma, - PAGE_SIZE, - DMA_FROM_DEVICE); + PAGE_SIZE, DMA_FROM_DEVICE); else if (adapter->clean_rx == e1000_clean_rx_irq_ps) dma_unmap_single(&pdev->dev, buffer_info->dma, adapter->rx_ps_bsize0, @@ -1601,14 +1737,18 @@ static void e1000_clean_rx_ring(struct e1000_adapter *adapter) rx_ring->next_to_use = 0; adapter->flags2 &= ~FLAG2_IS_DISCARDING; - writel(0, adapter->hw.hw_addr + rx_ring->head); - writel(0, adapter->hw.hw_addr + rx_ring->tail); + writel(0, rx_ring->head); + if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) + e1000e_update_rdt_wa(rx_ring, 0); + else + writel(0, rx_ring->tail); } static void e1000e_downshift_workaround(struct work_struct *work) { struct e1000_adapter *adapter = container_of(work, - struct e1000_adapter, downshift_task); + struct e1000_adapter, + downshift_task); if (test_bit(__E1000_DOWN, &adapter->state)) return; @@ -1621,29 +1761,24 @@ static void e1000e_downshift_workaround(struct work_struct *work) * @irq: interrupt number * @data: pointer to a network interface device structure **/ -static irqreturn_t e1000_intr_msi(int irq, void *data) +static irqreturn_t e1000_intr_msi(int __always_unused irq, void *data) { struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; u32 icr = er32(ICR); - /* - * read ICR disables interrupts using IAM - */ - + /* read ICR disables interrupts using IAM */ if (icr & E1000_ICR_LSC) { - hw->mac.get_link_status = 1; - /* - * ICH8 workaround-- Call gig speed drop workaround on cable + hw->mac.get_link_status = true; + /* ICH8 workaround-- Call gig speed drop workaround on cable * disconnect (LSC) before accessing any PHY registers */ if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) && (!(er32(STATUS) & E1000_STATUS_LU))) schedule_work(&adapter->downshift_task); - /* - * 80003ES2LAN workaround-- For packet buffer work-around on + /* 80003ES2LAN workaround-- For packet buffer work-around on * link down event; disable receives here in the ISR and reset * adapter in watchdog */ @@ -1651,14 +1786,32 @@ static irqreturn_t e1000_intr_msi(int irq, void *data) adapter->flags & FLAG_RX_NEEDS_RESTART) { /* disable receives */ u32 rctl = er32(RCTL); + ew32(RCTL, rctl & ~E1000_RCTL_EN); - adapter->flags |= FLAG_RX_RESTART_NOW; + adapter->flags |= FLAG_RESTART_NOW; } /* guard against interrupt when we're going down */ if (!test_bit(__E1000_DOWN, &adapter->state)) mod_timer(&adapter->watchdog_timer, jiffies + 1); } + /* Reset on uncorrectable ECC error */ + if ((icr & E1000_ICR_ECCER) && (hw->mac.type == e1000_pch_lpt)) { + u32 pbeccsts = er32(PBECCSTS); + + adapter->corr_errors += + pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK; + adapter->uncorr_errors += + (pbeccsts & E1000_PBECCSTS_UNCORR_ERR_CNT_MASK) >> + E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT; + + /* Do the reset outside of interrupt context */ + schedule_work(&adapter->reset_task); + + /* return immediately since reset is imminent */ + return IRQ_HANDLED; + } + if (napi_schedule_prep(&adapter->napi)) { adapter->total_tx_bytes = 0; adapter->total_tx_packets = 0; @@ -1675,7 +1828,7 @@ static irqreturn_t e1000_intr_msi(int irq, void *data) * @irq: interrupt number * @data: pointer to a network interface device structure **/ -static irqreturn_t e1000_intr(int irq, void *data) +static irqreturn_t e1000_intr(int __always_unused irq, void *data) { struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); @@ -1683,33 +1836,29 @@ static irqreturn_t e1000_intr(int irq, void *data) u32 rctl, icr = er32(ICR); if (!icr || test_bit(__E1000_DOWN, &adapter->state)) - return IRQ_NONE; /* Not our interrupt */ + return IRQ_NONE; /* Not our interrupt */ - /* - * IMS will not auto-mask if INT_ASSERTED is not set, and if it is + /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is * not set, then the adapter didn't send an interrupt */ if (!(icr & E1000_ICR_INT_ASSERTED)) return IRQ_NONE; - /* - * Interrupt Auto-Mask...upon reading ICR, + /* Interrupt Auto-Mask...upon reading ICR, * interrupts are masked. No need for the * IMC write */ if (icr & E1000_ICR_LSC) { - hw->mac.get_link_status = 1; - /* - * ICH8 workaround-- Call gig speed drop workaround on cable + hw->mac.get_link_status = true; + /* ICH8 workaround-- Call gig speed drop workaround on cable * disconnect (LSC) before accessing any PHY registers */ if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) && (!(er32(STATUS) & E1000_STATUS_LU))) schedule_work(&adapter->downshift_task); - /* - * 80003ES2LAN workaround-- + /* 80003ES2LAN workaround-- * For packet buffer work-around on link down event; * disable receives here in the ISR and * reset adapter in watchdog @@ -1719,13 +1868,30 @@ static irqreturn_t e1000_intr(int irq, void *data) /* disable receives */ rctl = er32(RCTL); ew32(RCTL, rctl & ~E1000_RCTL_EN); - adapter->flags |= FLAG_RX_RESTART_NOW; + adapter->flags |= FLAG_RESTART_NOW; } /* guard against interrupt when we're going down */ if (!test_bit(__E1000_DOWN, &adapter->state)) mod_timer(&adapter->watchdog_timer, jiffies + 1); } + /* Reset on uncorrectable ECC error */ + if ((icr & E1000_ICR_ECCER) && (hw->mac.type == e1000_pch_lpt)) { + u32 pbeccsts = er32(PBECCSTS); + + adapter->corr_errors += + pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK; + adapter->uncorr_errors += + (pbeccsts & E1000_PBECCSTS_UNCORR_ERR_CNT_MASK) >> + E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT; + + /* Do the reset outside of interrupt context */ + schedule_work(&adapter->reset_task); + + /* return immediately since reset is imminent */ + return IRQ_HANDLED; + } + if (napi_schedule_prep(&adapter->napi)) { adapter->total_tx_bytes = 0; adapter->total_tx_packets = 0; @@ -1737,7 +1903,7 @@ static irqreturn_t e1000_intr(int irq, void *data) return IRQ_HANDLED; } -static irqreturn_t e1000_msix_other(int irq, void *data) +static irqreturn_t e1000_msix_other(int __always_unused irq, void *data) { struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); @@ -1756,7 +1922,7 @@ static irqreturn_t e1000_msix_other(int irq, void *data) if (icr & E1000_ICR_OTHER) { if (!(icr & E1000_ICR_LSC)) goto no_link_interrupt; - hw->mac.get_link_status = 1; + hw->mac.get_link_status = true; /* guard against interrupt when we're going down */ if (!test_bit(__E1000_DOWN, &adapter->state)) mod_timer(&adapter->watchdog_timer, jiffies + 1); @@ -1769,37 +1935,36 @@ no_link_interrupt: return IRQ_HANDLED; } - -static irqreturn_t e1000_intr_msix_tx(int irq, void *data) +static irqreturn_t e1000_intr_msix_tx(int __always_unused irq, void *data) { struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; struct e1000_ring *tx_ring = adapter->tx_ring; - adapter->total_tx_bytes = 0; adapter->total_tx_packets = 0; - if (!e1000_clean_tx_irq(adapter)) + if (!e1000_clean_tx_irq(tx_ring)) /* Ring was not completely cleaned, so fire another interrupt */ ew32(ICS, tx_ring->ims_val); return IRQ_HANDLED; } -static irqreturn_t e1000_intr_msix_rx(int irq, void *data) +static irqreturn_t e1000_intr_msix_rx(int __always_unused irq, void *data) { struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_ring *rx_ring = adapter->rx_ring; /* Write the ITR value calculated at the end of the * previous interrupt. */ - if (adapter->rx_ring->set_itr) { - writel(1000000000 / (adapter->rx_ring->itr_val * 256), - adapter->hw.hw_addr + adapter->rx_ring->itr_register); - adapter->rx_ring->set_itr = 0; + if (rx_ring->set_itr) { + writel(1000000000 / (rx_ring->itr_val * 256), + rx_ring->itr_register); + rx_ring->set_itr = 0; } if (napi_schedule_prep(&adapter->napi)) { @@ -1829,19 +1994,19 @@ static void e1000_configure_msix(struct e1000_adapter *adapter) /* Workaround issue with spurious interrupts on 82574 in MSI-X mode */ if (hw->mac.type == e1000_82574) { u32 rfctl = er32(RFCTL); + rfctl |= E1000_RFCTL_ACK_DIS; ew32(RFCTL, rfctl); } -#define E1000_IVAR_INT_ALLOC_VALID 0x8 /* Configure Rx vector */ rx_ring->ims_val = E1000_IMS_RXQ0; adapter->eiac_mask |= rx_ring->ims_val; if (rx_ring->itr_val) writel(1000000000 / (rx_ring->itr_val * 256), - hw->hw_addr + rx_ring->itr_register); + rx_ring->itr_register); else - writel(1, hw->hw_addr + rx_ring->itr_register); + writel(1, rx_ring->itr_register); ivar = E1000_IVAR_INT_ALLOC_VALID | vector; /* Configure Tx vector */ @@ -1849,9 +2014,9 @@ static void e1000_configure_msix(struct e1000_adapter *adapter) vector++; if (tx_ring->itr_val) writel(1000000000 / (tx_ring->itr_val * 256), - hw->hw_addr + tx_ring->itr_register); + tx_ring->itr_register); else - writel(1, hw->hw_addr + tx_ring->itr_register); + writel(1, tx_ring->itr_register); adapter->eiac_mask |= tx_ring->ims_val; ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 8); @@ -1874,7 +2039,6 @@ static void e1000_configure_msix(struct e1000_adapter *adapter) ctrl_ext |= E1000_CTRL_EXT_PBA_CLR; /* Auto-Mask Other interrupts upon ICR read */ -#define E1000_EIAC_MASK_82574 0x01F00000 ew32(IAM, ~E1000_EIAC_MASK_82574 | E1000_IMS_OTHER); ctrl_ext |= E1000_CTRL_EXT_EIAME; ew32(CTRL_EXT, ctrl_ext); @@ -1909,16 +2073,20 @@ void e1000e_set_interrupt_capability(struct e1000_adapter *adapter) if (adapter->flags & FLAG_HAS_MSIX) { adapter->num_vectors = 3; /* RxQ0, TxQ0 and other */ adapter->msix_entries = kcalloc(adapter->num_vectors, - sizeof(struct msix_entry), - GFP_KERNEL); + sizeof(struct + msix_entry), + GFP_KERNEL); if (adapter->msix_entries) { + struct e1000_adapter *a = adapter; + for (i = 0; i < adapter->num_vectors; i++) adapter->msix_entries[i].entry = i; - err = pci_enable_msix(adapter->pdev, - adapter->msix_entries, - adapter->num_vectors); - if (err == 0) + err = pci_enable_msix_range(a->pdev, + a->msix_entries, + a->num_vectors, + a->num_vectors); + if (err > 0) return; } /* MSI-X failed, so fall through and try MSI */ @@ -1965,8 +2133,9 @@ static int e1000_request_msix(struct e1000_adapter *adapter) e1000_intr_msix_rx, 0, adapter->rx_ring->name, netdev); if (err) - goto out; - adapter->rx_ring->itr_register = E1000_EITR_82574(vector); + return err; + adapter->rx_ring->itr_register = adapter->hw.hw_addr + + E1000_EITR_82574(vector); adapter->rx_ring->itr_val = adapter->itr; vector++; @@ -1980,20 +2149,20 @@ static int e1000_request_msix(struct e1000_adapter *adapter) e1000_intr_msix_tx, 0, adapter->tx_ring->name, netdev); if (err) - goto out; - adapter->tx_ring->itr_register = E1000_EITR_82574(vector); + return err; + adapter->tx_ring->itr_register = adapter->hw.hw_addr + + E1000_EITR_82574(vector); adapter->tx_ring->itr_val = adapter->itr; vector++; err = request_irq(adapter->msix_entries[vector].vector, e1000_msix_other, 0, netdev->name, netdev); if (err) - goto out; + return err; e1000_configure_msix(adapter); + return 0; -out: - return err; } /** @@ -2070,6 +2239,7 @@ static void e1000_irq_disable(struct e1000_adapter *adapter) if (adapter->msix_entries) { int i; + for (i = 0; i < adapter->num_vectors; i++) synchronize_irq(adapter->msix_entries[i].vector); } else { @@ -2087,6 +2257,8 @@ static void e1000_irq_enable(struct e1000_adapter *adapter) if (adapter->msix_entries) { ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574); ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC); + } else if (hw->mac.type == e1000_pch_lpt) { + ew32(IMS, IMS_ENABLE_MASK | E1000_IMS_ECCER); } else { ew32(IMS, IMS_ENABLE_MASK); } @@ -2145,7 +2317,7 @@ void e1000e_release_hw_control(struct e1000_adapter *adapter) } /** - * @e1000_alloc_ring - allocate memory for a ring structure + * e1000_alloc_ring_dma - allocate memory for a ring structure **/ static int e1000_alloc_ring_dma(struct e1000_adapter *adapter, struct e1000_ring *ring) @@ -2162,13 +2334,13 @@ static int e1000_alloc_ring_dma(struct e1000_adapter *adapter, /** * e1000e_setup_tx_resources - allocate Tx resources (Descriptors) - * @adapter: board private structure + * @tx_ring: Tx descriptor ring * * Return 0 on success, negative on failure **/ -int e1000e_setup_tx_resources(struct e1000_adapter *adapter) +int e1000e_setup_tx_resources(struct e1000_ring *tx_ring) { - struct e1000_ring *tx_ring = adapter->tx_ring; + struct e1000_adapter *adapter = tx_ring->adapter; int err = -ENOMEM, size; size = sizeof(struct e1000_buffer) * tx_ring->count; @@ -2196,13 +2368,13 @@ err: /** * e1000e_setup_rx_resources - allocate Rx resources (Descriptors) - * @adapter: board private structure + * @rx_ring: Rx descriptor ring * * Returns 0 on success, negative on failure **/ -int e1000e_setup_rx_resources(struct e1000_adapter *adapter) +int e1000e_setup_rx_resources(struct e1000_ring *rx_ring) { - struct e1000_ring *rx_ring = adapter->rx_ring; + struct e1000_adapter *adapter = rx_ring->adapter; struct e1000_buffer *buffer_info; int i, size, desc_len, err = -ENOMEM; @@ -2249,18 +2421,18 @@ err: /** * e1000_clean_tx_ring - Free Tx Buffers - * @adapter: board private structure + * @tx_ring: Tx descriptor ring **/ -static void e1000_clean_tx_ring(struct e1000_adapter *adapter) +static void e1000_clean_tx_ring(struct e1000_ring *tx_ring) { - struct e1000_ring *tx_ring = adapter->tx_ring; + struct e1000_adapter *adapter = tx_ring->adapter; struct e1000_buffer *buffer_info; unsigned long size; unsigned int i; for (i = 0; i < tx_ring->count; i++) { buffer_info = &tx_ring->buffer_info[i]; - e1000_put_txbuf(adapter, buffer_info); + e1000_put_txbuf(tx_ring, buffer_info); } netdev_reset_queue(adapter->netdev); @@ -2272,22 +2444,25 @@ static void e1000_clean_tx_ring(struct e1000_adapter *adapter) tx_ring->next_to_use = 0; tx_ring->next_to_clean = 0; - writel(0, adapter->hw.hw_addr + tx_ring->head); - writel(0, adapter->hw.hw_addr + tx_ring->tail); + writel(0, tx_ring->head); + if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) + e1000e_update_tdt_wa(tx_ring, 0); + else + writel(0, tx_ring->tail); } /** * e1000e_free_tx_resources - Free Tx Resources per Queue - * @adapter: board private structure + * @tx_ring: Tx descriptor ring * * Free all transmit software resources **/ -void e1000e_free_tx_resources(struct e1000_adapter *adapter) +void e1000e_free_tx_resources(struct e1000_ring *tx_ring) { + struct e1000_adapter *adapter = tx_ring->adapter; struct pci_dev *pdev = adapter->pdev; - struct e1000_ring *tx_ring = adapter->tx_ring; - e1000_clean_tx_ring(adapter); + e1000_clean_tx_ring(tx_ring); vfree(tx_ring->buffer_info); tx_ring->buffer_info = NULL; @@ -2299,18 +2474,17 @@ void e1000e_free_tx_resources(struct e1000_adapter *adapter) /** * e1000e_free_rx_resources - Free Rx Resources - * @adapter: board private structure + * @rx_ring: Rx descriptor ring * * Free all receive software resources **/ - -void e1000e_free_rx_resources(struct e1000_adapter *adapter) +void e1000e_free_rx_resources(struct e1000_ring *rx_ring) { + struct e1000_adapter *adapter = rx_ring->adapter; struct pci_dev *pdev = adapter->pdev; - struct e1000_ring *rx_ring = adapter->rx_ring; int i; - e1000_clean_rx_ring(adapter); + e1000_clean_rx_ring(rx_ring); for (i = 0; i < rx_ring->count; i++) kfree(rx_ring->buffer_info[i].ps_pages); @@ -2339,39 +2513,37 @@ void e1000e_free_rx_resources(struct e1000_adapter *adapter) * while increasing bulk throughput. This functionality is controlled * by the InterruptThrottleRate module parameter. **/ -static unsigned int e1000_update_itr(struct e1000_adapter *adapter, - u16 itr_setting, int packets, - int bytes) +static unsigned int e1000_update_itr(u16 itr_setting, int packets, int bytes) { unsigned int retval = itr_setting; if (packets == 0) - goto update_itr_done; + return itr_setting; switch (itr_setting) { case lowest_latency: /* handle TSO and jumbo frames */ - if (bytes/packets > 8000) + if (bytes / packets > 8000) retval = bulk_latency; else if ((packets < 5) && (bytes > 512)) retval = low_latency; break; - case low_latency: /* 50 usec aka 20000 ints/s */ + case low_latency: /* 50 usec aka 20000 ints/s */ if (bytes > 10000) { /* this if handles the TSO accounting */ - if (bytes/packets > 8000) + if (bytes / packets > 8000) retval = bulk_latency; - else if ((packets < 10) || ((bytes/packets) > 1200)) + else if ((packets < 10) || ((bytes / packets) > 1200)) retval = bulk_latency; else if ((packets > 35)) retval = lowest_latency; - } else if (bytes/packets > 2000) { + } else if (bytes / packets > 2000) { retval = bulk_latency; } else if (packets <= 2 && bytes < 512) { retval = lowest_latency; } break; - case bulk_latency: /* 250 usec aka 4000 ints/s */ + case bulk_latency: /* 250 usec aka 4000 ints/s */ if (bytes > 25000) { if (packets > 35) retval = low_latency; @@ -2381,13 +2553,11 @@ static unsigned int e1000_update_itr(struct e1000_adapter *adapter, break; } -update_itr_done: return retval; } static void e1000_set_itr(struct e1000_adapter *adapter) { - struct e1000_hw *hw = &adapter->hw; u16 current_itr; u32 new_itr = adapter->itr; @@ -2403,31 +2573,29 @@ static void e1000_set_itr(struct e1000_adapter *adapter) goto set_itr_now; } - adapter->tx_itr = e1000_update_itr(adapter, - adapter->tx_itr, - adapter->total_tx_packets, - adapter->total_tx_bytes); + adapter->tx_itr = e1000_update_itr(adapter->tx_itr, + adapter->total_tx_packets, + adapter->total_tx_bytes); /* conservative mode (itr 3) eliminates the lowest_latency setting */ if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency) adapter->tx_itr = low_latency; - adapter->rx_itr = e1000_update_itr(adapter, - adapter->rx_itr, - adapter->total_rx_packets, - adapter->total_rx_bytes); + adapter->rx_itr = e1000_update_itr(adapter->rx_itr, + adapter->total_rx_packets, + adapter->total_rx_bytes); /* conservative mode (itr 3) eliminates the lowest_latency setting */ if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency) adapter->rx_itr = low_latency; current_itr = max(adapter->rx_itr, adapter->tx_itr); - switch (current_itr) { /* counts and packets in update_itr are dependent on these numbers */ + switch (current_itr) { case lowest_latency: new_itr = 70000; break; case low_latency: - new_itr = 20000; /* aka hwitr = ~200 */ + new_itr = 20000; /* aka hwitr = ~200 */ break; case bulk_latency: new_itr = 4000; @@ -2438,23 +2606,42 @@ static void e1000_set_itr(struct e1000_adapter *adapter) set_itr_now: if (new_itr != adapter->itr) { - /* - * this attempts to bias the interrupt rate towards Bulk + /* this attempts to bias the interrupt rate towards Bulk * by adding intermediate steps when interrupt rate is * increasing */ new_itr = new_itr > adapter->itr ? - min(adapter->itr + (new_itr >> 2), new_itr) : - new_itr; + min(adapter->itr + (new_itr >> 2), new_itr) : new_itr; adapter->itr = new_itr; adapter->rx_ring->itr_val = new_itr; if (adapter->msix_entries) adapter->rx_ring->set_itr = 1; else - if (new_itr) - ew32(ITR, 1000000000 / (new_itr * 256)); - else - ew32(ITR, 0); + e1000e_write_itr(adapter, new_itr); + } +} + +/** + * e1000e_write_itr - write the ITR value to the appropriate registers + * @adapter: address of board private structure + * @itr: new ITR value to program + * + * e1000e_write_itr determines if the adapter is in MSI-X mode + * and, if so, writes the EITR registers with the ITR value. + * Otherwise, it writes the ITR value into the ITR register. + **/ +void e1000e_write_itr(struct e1000_adapter *adapter, u32 itr) +{ + struct e1000_hw *hw = &adapter->hw; + u32 new_itr = itr ? 1000000000 / (itr * 256) : 0; + + if (adapter->msix_entries) { + int vector; + + for (vector = 0; vector < adapter->num_vectors; vector++) + writel(new_itr, hw->hw_addr + E1000_EITR_82574(vector)); + } else { + ew32(ITR, new_itr); } } @@ -2462,15 +2649,21 @@ set_itr_now: * e1000_alloc_queues - Allocate memory for all rings * @adapter: board private structure to initialize **/ -static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter) +static int e1000_alloc_queues(struct e1000_adapter *adapter) { - adapter->tx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL); + int size = sizeof(struct e1000_ring); + + adapter->tx_ring = kzalloc(size, GFP_KERNEL); if (!adapter->tx_ring) goto err; + adapter->tx_ring->count = adapter->tx_ring_count; + adapter->tx_ring->adapter = adapter; - adapter->rx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL); + adapter->rx_ring = kzalloc(size, GFP_KERNEL); if (!adapter->rx_ring) goto err; + adapter->rx_ring->count = adapter->rx_ring_count; + adapter->rx_ring->adapter = adapter; return 0; err: @@ -2481,33 +2674,31 @@ err: } /** - * e1000_clean - NAPI Rx polling callback + * e1000e_poll - NAPI Rx polling callback * @napi: struct associated with this polling callback - * @budget: amount of packets driver is allowed to process this poll + * @weight: number of packets driver is allowed to process this poll **/ -static int e1000_clean(struct napi_struct *napi, int budget) +static int e1000e_poll(struct napi_struct *napi, int weight) { - struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi); + struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, + napi); struct e1000_hw *hw = &adapter->hw; struct net_device *poll_dev = adapter->netdev; int tx_cleaned = 1, work_done = 0; adapter = netdev_priv(poll_dev); - if (adapter->msix_entries && - !(adapter->rx_ring->ims_val & adapter->tx_ring->ims_val)) - goto clean_rx; - - tx_cleaned = e1000_clean_tx_irq(adapter); + if (!adapter->msix_entries || + (adapter->rx_ring->ims_val & adapter->tx_ring->ims_val)) + tx_cleaned = e1000_clean_tx_irq(adapter->tx_ring); -clean_rx: - adapter->clean_rx(adapter, &work_done, budget); + adapter->clean_rx(adapter->rx_ring, &work_done, weight); if (!tx_cleaned) - work_done = budget; + work_done = weight; - /* If budget not fully consumed, exit the polling mode */ - if (work_done < budget) { + /* If weight not fully consumed, exit the polling mode */ + if (work_done < weight) { if (adapter->itr_setting & 3) e1000_set_itr(adapter); napi_complete(napi); @@ -2522,7 +2713,8 @@ clean_rx: return work_done; } -static int e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid) +static int e1000_vlan_rx_add_vid(struct net_device *netdev, + __always_unused __be16 proto, u16 vid) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; @@ -2547,7 +2739,8 @@ static int e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid) return 0; } -static int e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) +static int e1000_vlan_rx_kill_vid(struct net_device *netdev, + __always_unused __be16 proto, u16 vid) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; @@ -2591,7 +2784,8 @@ static void e1000e_vlan_filter_disable(struct e1000_adapter *adapter) ew32(RCTL, rctl); if (adapter->mng_vlan_id != (u16)E1000_MNG_VLAN_NONE) { - e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id); + e1000_vlan_rx_kill_vid(netdev, htons(ETH_P_8021Q), + adapter->mng_vlan_id); adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; } } @@ -2651,24 +2845,23 @@ static void e1000_update_mng_vlan(struct e1000_adapter *adapter) u16 vid = adapter->hw.mng_cookie.vlan_id; u16 old_vid = adapter->mng_vlan_id; - if (adapter->hw.mng_cookie.status & - E1000_MNG_DHCP_COOKIE_STATUS_VLAN) { - e1000_vlan_rx_add_vid(netdev, vid); + if (adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) { + e1000_vlan_rx_add_vid(netdev, htons(ETH_P_8021Q), vid); adapter->mng_vlan_id = vid; } if ((old_vid != (u16)E1000_MNG_VLAN_NONE) && (vid != old_vid)) - e1000_vlan_rx_kill_vid(netdev, old_vid); + e1000_vlan_rx_kill_vid(netdev, htons(ETH_P_8021Q), old_vid); } static void e1000_restore_vlan(struct e1000_adapter *adapter) { u16 vid; - e1000_vlan_rx_add_vid(adapter->netdev, 0); + e1000_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), 0); for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID) - e1000_vlan_rx_add_vid(adapter->netdev, vid); + e1000_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), vid); } static void e1000_init_manageability_pt(struct e1000_adapter *adapter) @@ -2681,8 +2874,7 @@ static void e1000_init_manageability_pt(struct e1000_adapter *adapter) manc = er32(MANC); - /* - * enable receiving management packets to the host. this will probably + /* enable receiving management packets to the host. this will probably * generate destination unreachable messages from the host OS, but * the packets will be handled on SMBUS */ @@ -2695,8 +2887,7 @@ static void e1000_init_manageability_pt(struct e1000_adapter *adapter) break; case e1000_82574: case e1000_82583: - /* - * Check if IPMI pass-through decision filter already exists; + /* Check if IPMI pass-through decision filter already exists; * if so, enable it. */ for (i = 0, j = 0; i < 8; i++) { @@ -2746,31 +2937,18 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) struct e1000_hw *hw = &adapter->hw; struct e1000_ring *tx_ring = adapter->tx_ring; u64 tdba; - u32 tdlen, tctl, tipg, tarc; - u32 ipgr1, ipgr2; + u32 tdlen, tctl, tarc; /* Setup the HW Tx Head and Tail descriptor pointers */ tdba = tx_ring->dma; tdlen = tx_ring->count * sizeof(struct e1000_tx_desc); - ew32(TDBAL, (tdba & DMA_BIT_MASK(32))); - ew32(TDBAH, (tdba >> 32)); - ew32(TDLEN, tdlen); - ew32(TDH, 0); - ew32(TDT, 0); - tx_ring->head = E1000_TDH; - tx_ring->tail = E1000_TDT; - - /* Set the default values for the Tx Inter Packet Gap timer */ - tipg = DEFAULT_82543_TIPG_IPGT_COPPER; /* 8 */ - ipgr1 = DEFAULT_82543_TIPG_IPGR1; /* 8 */ - ipgr2 = DEFAULT_82543_TIPG_IPGR2; /* 6 */ - - if (adapter->flags & FLAG_TIPG_MEDIUM_FOR_80003ESLAN) - ipgr2 = DEFAULT_80003ES2LAN_TIPG_IPGR2; /* 7 */ - - tipg |= ipgr1 << E1000_TIPG_IPGR1_SHIFT; - tipg |= ipgr2 << E1000_TIPG_IPGR2_SHIFT; - ew32(TIPG, tipg); + ew32(TDBAL(0), (tdba & DMA_BIT_MASK(32))); + ew32(TDBAH(0), (tdba >> 32)); + ew32(TDLEN(0), tdlen); + ew32(TDH(0), 0); + ew32(TDT(0), 0); + tx_ring->head = adapter->hw.hw_addr + E1000_TDH(0); + tx_ring->tail = adapter->hw.hw_addr + E1000_TDT(0); /* Set the Tx Interrupt Delay register */ ew32(TIDV, adapter->tx_int_delay); @@ -2779,13 +2957,13 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) if (adapter->flags2 & FLAG2_DMA_BURST) { u32 txdctl = er32(TXDCTL(0)); + txdctl &= ~(E1000_TXDCTL_PTHRESH | E1000_TXDCTL_HTHRESH | E1000_TXDCTL_WTHRESH); - /* - * set up some performance related parameters to encourage the + /* set up some performance related parameters to encourage the * hardware to use the bus more efficiently in bursts, depends * on the tx_int_delay to be enabled, - * wthresh = 5 ==> burst write a cacheline (64 bytes) at a time + * wthresh = 1 ==> burst write is disabled to avoid Tx stalls * hthresh = 1 ==> prefetch when one or more available * pthresh = 0x1f ==> prefetch if internal cache 31 or less * BEWARE: this seems to work but should be considered first if @@ -2793,9 +2971,9 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) */ txdctl |= E1000_TXDCTL_DMA_BURST_ENABLE; ew32(TXDCTL(0), txdctl); - /* erratum work around: set txdctl the same for both queues */ - ew32(TXDCTL(1), txdctl); } + /* erratum work around: set txdctl the same for both queues */ + ew32(TXDCTL(1), er32(TXDCTL(0))); /* Program the Transmit Control Register */ tctl = er32(TCTL); @@ -2805,8 +2983,7 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) if (adapter->flags & FLAG_TARC_SPEED_MODE_BIT) { tarc = er32(TARC(0)); - /* - * set the speed mode bit, we'll clear it if we're not at + /* set the speed mode bit, we'll clear it if we're not at * gigabit link later */ #define SPEED_MODE_BIT (1 << 21) @@ -2836,7 +3013,7 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) ew32(TCTL, tctl); - e1000e_config_collision_dist(hw); + hw->mac.ops.config_collision_dist(hw); } /** @@ -2851,8 +3028,11 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) u32 rctl, rfctl; u32 pages = 0; - /* Workaround Si errata on 82579 - configure jumbo frame flow */ - if (hw->mac.type == e1000_pch2lan) { + /* Workaround Si errata on PCHx - configure jumbo frame flow. + * If jumbo frames not set, program related MAC/PHY registers + * to h/w defaults + */ + if (hw->mac.type >= e1000_pch2lan) { s32 ret_val; if (adapter->netdev->mtu > ETH_DATA_LEN) @@ -2861,15 +3041,15 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, false); if (ret_val) - e_dbg("failed to enable jumbo frame workaround mode\n"); + e_dbg("failed to enable|disable jumbo frame workaround mode\n"); } /* Program MC offset vector base */ rctl = er32(RCTL); rctl &= ~(3 << E1000_RCTL_MO_SHIFT); rctl |= E1000_RCTL_EN | E1000_RCTL_BAM | - E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF | - (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT); + E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF | + (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT); /* Do not Store bad packets */ rctl &= ~E1000_RCTL_SBP; @@ -2927,9 +3107,9 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) /* Enable Extended Status in all Receive Descriptors */ rfctl = er32(RFCTL); rfctl |= E1000_RFCTL_EXTEN; + ew32(RFCTL, rfctl); - /* - * 82571 and greater support packet-split where the protocol + /* 82571 and greater support packet-split where the protocol * header is placed in skb->data and the packet data is * placed in pages hanging off of skb_shinfo(skb)->nr_frags. * In the case of a non-split, skb->data is linearly filled, @@ -2944,8 +3124,7 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) * per packet. */ pages = PAGE_USE_COUNT(adapter->netdev->mtu); - if (!(adapter->flags & FLAG_HAS_ERT) && (pages <= 3) && - (PAGE_SIZE <= 16384) && (rctl & E1000_RCTL_LPE)) + if ((pages <= 3) && (PAGE_SIZE <= 16384) && (rctl & E1000_RCTL_LPE)) adapter->rx_ps_pages = pages; else adapter->rx_ps_pages = 0; @@ -2953,39 +3132,46 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) if (adapter->rx_ps_pages) { u32 psrctl = 0; - /* - * disable packet split support for IPv6 extension headers, - * because some malformed IPv6 headers can hang the Rx - */ - rfctl |= (E1000_RFCTL_IPV6_EX_DIS | - E1000_RFCTL_NEW_IPV6_EXT_DIS); - /* Enable Packet split descriptors */ rctl |= E1000_RCTL_DTYP_PS; - psrctl |= adapter->rx_ps_bsize0 >> - E1000_PSRCTL_BSIZE0_SHIFT; + psrctl |= adapter->rx_ps_bsize0 >> E1000_PSRCTL_BSIZE0_SHIFT; switch (adapter->rx_ps_pages) { case 3: - psrctl |= PAGE_SIZE << - E1000_PSRCTL_BSIZE3_SHIFT; + psrctl |= PAGE_SIZE << E1000_PSRCTL_BSIZE3_SHIFT; + /* fall-through */ case 2: - psrctl |= PAGE_SIZE << - E1000_PSRCTL_BSIZE2_SHIFT; + psrctl |= PAGE_SIZE << E1000_PSRCTL_BSIZE2_SHIFT; + /* fall-through */ case 1: - psrctl |= PAGE_SIZE >> - E1000_PSRCTL_BSIZE1_SHIFT; + psrctl |= PAGE_SIZE >> E1000_PSRCTL_BSIZE1_SHIFT; break; } ew32(PSRCTL, psrctl); } - ew32(RFCTL, rfctl); + /* This is useful for sniffing bad packets. */ + if (adapter->netdev->features & NETIF_F_RXALL) { + /* UPE and MPE will be handled by normal PROMISC logic + * in e1000e_set_rx_mode + */ + rctl |= (E1000_RCTL_SBP | /* Receive bad packets */ + E1000_RCTL_BAM | /* RX All Bcast Pkts */ + E1000_RCTL_PMCF); /* RX All MAC Ctrl Pkts */ + + rctl &= ~(E1000_RCTL_VFE | /* Disable VLAN filter */ + E1000_RCTL_DPF | /* Allow filtered pause */ + E1000_RCTL_CFIEN); /* Dis VLAN CFIEN Filter */ + /* Do not mess with E1000_CTRL_VME, it affects transmit as well, + * and that breaks VLANs. + */ + } + ew32(RCTL, rctl); /* just started the receive unit, no need to restart */ - adapter->flags &= ~FLAG_RX_RESTART_NOW; + adapter->flags &= ~FLAG_RESTART_NOW; } /** @@ -3025,8 +3211,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) usleep_range(10000, 20000); if (adapter->flags2 & FLAG2_DMA_BURST) { - /* - * set the writeback threshold (only takes effect if the RDTR + /* set the writeback threshold (only takes effect if the RDTR * is set). set GRAN=1 and write back up to 0x4 worth, and * enable prefetching of 0x20 Rx descriptors * granularity = 01 @@ -3037,8 +3222,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) ew32(RXDCTL(0), E1000_RXDCTL_DMA_BURST_ENABLE); ew32(RXDCTL(1), E1000_RXDCTL_DMA_BURST_ENABLE); - /* - * override the delay timers for enabling bursting, only if + /* override the delay timers for enabling bursting, only if * the value was not set by the user via module options */ if (adapter->rx_int_delay == DEFAULT_RDTR) @@ -3053,7 +3237,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) /* irq moderation */ ew32(RADV, adapter->rx_abs_int_delay); if ((adapter->itr_setting != 0) && (adapter->itr != 0)) - ew32(ITR, 1000000000 / (adapter->itr * 256)); + e1000e_write_itr(adapter, adapter->itr); ctrl_ext = er32(CTRL_EXT); /* Auto-Mask interrupts upon ICR access */ @@ -3062,58 +3246,44 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) ew32(CTRL_EXT, ctrl_ext); e1e_flush(); - /* - * Setup the HW Rx Head and Tail Descriptor Pointers and + /* Setup the HW Rx Head and Tail Descriptor Pointers and * the Base and Length of the Rx Descriptor Ring */ rdba = rx_ring->dma; - ew32(RDBAL, (rdba & DMA_BIT_MASK(32))); - ew32(RDBAH, (rdba >> 32)); - ew32(RDLEN, rdlen); - ew32(RDH, 0); - ew32(RDT, 0); - rx_ring->head = E1000_RDH; - rx_ring->tail = E1000_RDT; + ew32(RDBAL(0), (rdba & DMA_BIT_MASK(32))); + ew32(RDBAH(0), (rdba >> 32)); + ew32(RDLEN(0), rdlen); + ew32(RDH(0), 0); + ew32(RDT(0), 0); + rx_ring->head = adapter->hw.hw_addr + E1000_RDH(0); + rx_ring->tail = adapter->hw.hw_addr + E1000_RDT(0); /* Enable Receive Checksum Offload for TCP and UDP */ rxcsum = er32(RXCSUM); - if (adapter->netdev->features & NETIF_F_RXCSUM) { + if (adapter->netdev->features & NETIF_F_RXCSUM) rxcsum |= E1000_RXCSUM_TUOFL; - - /* - * IPv4 payload checksum for UDP fragments must be - * used in conjunction with packet-split. - */ - if (adapter->rx_ps_pages) - rxcsum |= E1000_RXCSUM_IPPCSE; - } else { + else rxcsum &= ~E1000_RXCSUM_TUOFL; - /* no need to clear IPPCSE as it defaults to 0 */ - } ew32(RXCSUM, rxcsum); - /* - * Enable early receives on supported devices, only takes effect when - * packet size is equal or larger than the specified value (in 8 byte - * units), e.g. using jumbo frames when setting to E1000_ERT_2048 + /* With jumbo frames, excessive C-state transition latencies result + * in dropped transactions. */ - if ((adapter->flags & FLAG_HAS_ERT) || - (adapter->hw.mac.type == e1000_pch2lan)) { - if (adapter->netdev->mtu > ETH_DATA_LEN) { + if (adapter->netdev->mtu > ETH_DATA_LEN) { + u32 lat = + ((er32(PBA) & E1000_PBA_RXA_MASK) * 1024 - + adapter->max_frame_size) * 8 / 1000; + + if (adapter->flags & FLAG_IS_ICH) { u32 rxdctl = er32(RXDCTL(0)); + ew32(RXDCTL(0), rxdctl | 0x3); - if (adapter->flags & FLAG_HAS_ERT) - ew32(ERT, E1000_ERT_2048 | (1 << 13)); - /* - * With jumbo frames and early-receive enabled, - * excessive C-state transition latencies result in - * dropped transactions. - */ - pm_qos_update_request(&adapter->netdev->pm_qos_req, 55); - } else { - pm_qos_update_request(&adapter->netdev->pm_qos_req, - PM_QOS_DEFAULT_VALUE); } + + pm_qos_update_request(&adapter->netdev->pm_qos_req, lat); + } else { + pm_qos_update_request(&adapter->netdev->pm_qos_req, + PM_QOS_DEFAULT_VALUE); } /* Enable Receives */ @@ -3150,7 +3320,7 @@ static int e1000e_write_mc_addr_list(struct net_device *netdev) /* update_mc_addr_list expects a packed array of only addresses. */ i = 0; netdev_for_each_mc_addr(ha, netdev) - memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN); + memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN); hw->mac.ops.update_mc_addr_list(hw, mta_list, i); kfree(mta_list); @@ -3171,9 +3341,11 @@ static int e1000e_write_uc_addr_list(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - unsigned int rar_entries = hw->mac.rar_entry_count; + unsigned int rar_entries; int count = 0; + rar_entries = hw->mac.ops.rar_get_count(hw); + /* save a rar entry for our hardware address */ rar_entries--; @@ -3188,14 +3360,17 @@ static int e1000e_write_uc_addr_list(struct net_device *netdev) if (!netdev_uc_empty(netdev) && rar_entries) { struct netdev_hw_addr *ha; - /* - * write the addresses in reverse order to avoid write + /* write the addresses in reverse order to avoid write * combining */ netdev_for_each_uc_addr(ha, netdev) { + int rval; + if (!rar_entries) break; - e1000e_rar_set(hw, ha->addr, rar_entries--); + rval = hw->mac.ops.rar_set(hw, ha->addr, rar_entries--); + if (rval < 0) + return -ENOMEM; count++; } } @@ -3225,6 +3400,9 @@ static void e1000e_set_rx_mode(struct net_device *netdev) struct e1000_hw *hw = &adapter->hw; u32 rctl; + if (pm_runtime_suspended(netdev->dev.parent)) + return; + /* Check for Promiscuous and All Multicast modes */ rctl = er32(RCTL); @@ -3237,11 +3415,11 @@ static void e1000e_set_rx_mode(struct net_device *netdev) e1000e_vlan_filter_disable(adapter); } else { int count; + if (netdev->flags & IFF_ALLMULTI) { rctl |= E1000_RCTL_MPE; } else { - /* - * Write addresses to the MTA, if the attempt fails + /* Write addresses to the MTA, if the attempt fails * then we should just turn on promiscuous mode so * that we can at least receive multicast traffic */ @@ -3250,8 +3428,7 @@ static void e1000e_set_rx_mode(struct net_device *netdev) rctl |= E1000_RCTL_MPE; } e1000e_vlan_filter_enable(adapter); - /* - * Write addresses to available RAR registers, if there is not + /* Write addresses to available RAR registers, if there is not * sufficient space to store all the addresses then enable * unicast promiscuous mode */ @@ -3262,28 +3439,304 @@ static void e1000e_set_rx_mode(struct net_device *netdev) ew32(RCTL, rctl); - if (netdev->features & NETIF_F_HW_VLAN_RX) + if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX) e1000e_vlan_strip_enable(adapter); else e1000e_vlan_strip_disable(adapter); } +static void e1000e_setup_rss_hash(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 mrqc, rxcsum; + int i; + static const u32 rsskey[10] = { + 0xda565a6d, 0xc20e5b25, 0x3d256741, 0xb08fa343, 0xcb2bcad0, + 0xb4307bae, 0xa32dcb77, 0x0cf23080, 0x3bb7426a, 0xfa01acbe + }; + + /* Fill out hash function seed */ + for (i = 0; i < 10; i++) + ew32(RSSRK(i), rsskey[i]); + + /* Direct all traffic to queue 0 */ + for (i = 0; i < 32; i++) + ew32(RETA(i), 0); + + /* Disable raw packet checksumming so that RSS hash is placed in + * descriptor on writeback. + */ + rxcsum = er32(RXCSUM); + rxcsum |= E1000_RXCSUM_PCSD; + + ew32(RXCSUM, rxcsum); + + mrqc = (E1000_MRQC_RSS_FIELD_IPV4 | + E1000_MRQC_RSS_FIELD_IPV4_TCP | + E1000_MRQC_RSS_FIELD_IPV6 | + E1000_MRQC_RSS_FIELD_IPV6_TCP | + E1000_MRQC_RSS_FIELD_IPV6_TCP_EX); + + ew32(MRQC, mrqc); +} + +/** + * e1000e_get_base_timinca - get default SYSTIM time increment attributes + * @adapter: board private structure + * @timinca: pointer to returned time increment attributes + * + * Get attributes for incrementing the System Time Register SYSTIML/H at + * the default base frequency, and set the cyclecounter shift value. + **/ +s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca) +{ + struct e1000_hw *hw = &adapter->hw; + u32 incvalue, incperiod, shift; + + /* Make sure clock is enabled on I217 before checking the frequency */ + if ((hw->mac.type == e1000_pch_lpt) && + !(er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_ENABLED) && + !(er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_ENABLED)) { + u32 fextnvm7 = er32(FEXTNVM7); + + if (!(fextnvm7 & (1 << 0))) { + ew32(FEXTNVM7, fextnvm7 | (1 << 0)); + e1e_flush(); + } + } + + switch (hw->mac.type) { + case e1000_pch2lan: + case e1000_pch_lpt: + /* On I217, the clock frequency is 25MHz or 96MHz as + * indicated by the System Clock Frequency Indication + */ + if ((hw->mac.type != e1000_pch_lpt) || + (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI)) { + /* Stable 96MHz frequency */ + incperiod = INCPERIOD_96MHz; + incvalue = INCVALUE_96MHz; + shift = INCVALUE_SHIFT_96MHz; + adapter->cc.shift = shift + INCPERIOD_SHIFT_96MHz; + break; + } + /* fall-through */ + case e1000_82574: + case e1000_82583: + /* Stable 25MHz frequency */ + incperiod = INCPERIOD_25MHz; + incvalue = INCVALUE_25MHz; + shift = INCVALUE_SHIFT_25MHz; + adapter->cc.shift = shift; + break; + default: + return -EINVAL; + } + + *timinca = ((incperiod << E1000_TIMINCA_INCPERIOD_SHIFT) | + ((incvalue << shift) & E1000_TIMINCA_INCVALUE_MASK)); + + return 0; +} + +/** + * e1000e_config_hwtstamp - configure the hwtstamp registers and enable/disable + * @adapter: board private structure + * + * Outgoing time stamping can be enabled and disabled. Play nice and + * disable it when requested, although it shouldn't cause any overhead + * when no packet needs it. At most one packet in the queue may be + * marked for time stamping, otherwise it would be impossible to tell + * for sure to which packet the hardware time stamp belongs. + * + * Incoming time stamping has to be configured via the hardware filters. + * Not all combinations are supported, in particular event type has to be + * specified. Matching the kind of event packet is not supported, with the + * exception of "all V2 events regardless of level 2 or 4". + **/ +static int e1000e_config_hwtstamp(struct e1000_adapter *adapter, + struct hwtstamp_config *config) +{ + struct e1000_hw *hw = &adapter->hw; + u32 tsync_tx_ctl = E1000_TSYNCTXCTL_ENABLED; + u32 tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED; + u32 rxmtrl = 0; + u16 rxudp = 0; + bool is_l4 = false; + bool is_l2 = false; + u32 regval; + s32 ret_val; + + if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP)) + return -EINVAL; + + /* flags reserved for future extensions - must be zero */ + if (config->flags) + return -EINVAL; + + switch (config->tx_type) { + case HWTSTAMP_TX_OFF: + tsync_tx_ctl = 0; + break; + case HWTSTAMP_TX_ON: + break; + default: + return -ERANGE; + } + + switch (config->rx_filter) { + case HWTSTAMP_FILTER_NONE: + tsync_rx_ctl = 0; + break; + case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: + tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1; + rxmtrl = E1000_RXMTRL_PTP_V1_SYNC_MESSAGE; + is_l4 = true; + break; + case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: + tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1; + rxmtrl = E1000_RXMTRL_PTP_V1_DELAY_REQ_MESSAGE; + is_l4 = true; + break; + case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: + /* Also time stamps V2 L2 Path Delay Request/Response */ + tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_V2; + rxmtrl = E1000_RXMTRL_PTP_V2_SYNC_MESSAGE; + is_l2 = true; + break; + case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: + /* Also time stamps V2 L2 Path Delay Request/Response. */ + tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_V2; + rxmtrl = E1000_RXMTRL_PTP_V2_DELAY_REQ_MESSAGE; + is_l2 = true; + break; + case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: + /* Hardware cannot filter just V2 L4 Sync messages; + * fall-through to V2 (both L2 and L4) Sync. + */ + case HWTSTAMP_FILTER_PTP_V2_SYNC: + /* Also time stamps V2 Path Delay Request/Response. */ + tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2; + rxmtrl = E1000_RXMTRL_PTP_V2_SYNC_MESSAGE; + is_l2 = true; + is_l4 = true; + break; + case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: + /* Hardware cannot filter just V2 L4 Delay Request messages; + * fall-through to V2 (both L2 and L4) Delay Request. + */ + case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: + /* Also time stamps V2 Path Delay Request/Response. */ + tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2; + rxmtrl = E1000_RXMTRL_PTP_V2_DELAY_REQ_MESSAGE; + is_l2 = true; + is_l4 = true; + break; + case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: + case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: + /* Hardware cannot filter just V2 L4 or L2 Event messages; + * fall-through to all V2 (both L2 and L4) Events. + */ + case HWTSTAMP_FILTER_PTP_V2_EVENT: + tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_EVENT_V2; + config->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT; + is_l2 = true; + is_l4 = true; + break; + case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: + /* For V1, the hardware can only filter Sync messages or + * Delay Request messages but not both so fall-through to + * time stamp all packets. + */ + case HWTSTAMP_FILTER_ALL: + is_l2 = true; + is_l4 = true; + tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL; + config->rx_filter = HWTSTAMP_FILTER_ALL; + break; + default: + return -ERANGE; + } + + adapter->hwtstamp_config = *config; + + /* enable/disable Tx h/w time stamping */ + regval = er32(TSYNCTXCTL); + regval &= ~E1000_TSYNCTXCTL_ENABLED; + regval |= tsync_tx_ctl; + ew32(TSYNCTXCTL, regval); + if ((er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_ENABLED) != + (regval & E1000_TSYNCTXCTL_ENABLED)) { + e_err("Timesync Tx Control register not set as expected\n"); + return -EAGAIN; + } + + /* enable/disable Rx h/w time stamping */ + regval = er32(TSYNCRXCTL); + regval &= ~(E1000_TSYNCRXCTL_ENABLED | E1000_TSYNCRXCTL_TYPE_MASK); + regval |= tsync_rx_ctl; + ew32(TSYNCRXCTL, regval); + if ((er32(TSYNCRXCTL) & (E1000_TSYNCRXCTL_ENABLED | + E1000_TSYNCRXCTL_TYPE_MASK)) != + (regval & (E1000_TSYNCRXCTL_ENABLED | + E1000_TSYNCRXCTL_TYPE_MASK))) { + e_err("Timesync Rx Control register not set as expected\n"); + return -EAGAIN; + } + + /* L2: define ethertype filter for time stamped packets */ + if (is_l2) + rxmtrl |= ETH_P_1588; + + /* define which PTP packets get time stamped */ + ew32(RXMTRL, rxmtrl); + + /* Filter by destination port */ + if (is_l4) { + rxudp = PTP_EV_PORT; + cpu_to_be16s(&rxudp); + } + ew32(RXUDP, rxudp); + + e1e_flush(); + + /* Clear TSYNCRXCTL_VALID & TSYNCTXCTL_VALID bit */ + er32(RXSTMPH); + er32(TXSTMPH); + + /* Get and set the System Time Register SYSTIM base frequency */ + ret_val = e1000e_get_base_timinca(adapter, ®val); + if (ret_val) + return ret_val; + ew32(TIMINCA, regval); + + /* reset the ns time counter */ + timecounter_init(&adapter->tc, &adapter->cc, + ktime_to_ns(ktime_get_real())); + + return 0; +} + /** * e1000_configure - configure the hardware for Rx and Tx * @adapter: private board structure **/ static void e1000_configure(struct e1000_adapter *adapter) { + struct e1000_ring *rx_ring = adapter->rx_ring; + e1000e_set_rx_mode(adapter->netdev); e1000_restore_vlan(adapter); e1000_init_manageability_pt(adapter); e1000_configure_tx(adapter); + + if (adapter->netdev->features & NETIF_F_RXHASH) + e1000e_setup_rss_hash(adapter); e1000_setup_rctl(adapter); e1000_configure_rx(adapter); - adapter->alloc_rx_buf(adapter, e1000_desc_unused(adapter->rx_ring), - GFP_KERNEL); + adapter->alloc_rx_buf(rx_ring, e1000_desc_unused(rx_ring), GFP_KERNEL); } /** @@ -3310,10 +3763,6 @@ void e1000e_power_up_phy(struct e1000_adapter *adapter) */ static void e1000_power_down_phy(struct e1000_adapter *adapter) { - /* WoL is enabled */ - if (adapter->wol) - return; - if (adapter->hw.phy.ops.power_down) adapter->hw.phy.ops.power_down(&adapter->hw); } @@ -3339,8 +3788,7 @@ void e1000e_reset(struct e1000_adapter *adapter) ew32(PBA, pba); if (adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) { - /* - * To maintain wire speed transmits, the Tx FIFO should be + /* To maintain wire speed transmits, the Tx FIFO should be * large enough to accommodate two full transmit packets, * rounded up to the next 1KB and expressed in KB. Likewise, * the Rx FIFO should be large enough to accommodate at least @@ -3352,13 +3800,11 @@ void e1000e_reset(struct e1000_adapter *adapter) tx_space = pba >> 16; /* lower 16 bits has Rx packet buffer allocation size in KB */ pba &= 0xffff; - /* - * the Tx fifo also stores 16 bytes of information about the Tx + /* the Tx fifo also stores 16 bytes of information about the Tx * but don't include ethernet FCS because hardware appends it */ min_tx_space = (adapter->max_frame_size + - sizeof(struct e1000_tx_desc) - - ETH_FCS_LEN) * 2; + sizeof(struct e1000_tx_desc) - ETH_FCS_LEN) * 2; min_tx_space = ALIGN(min_tx_space, 1024); min_tx_space >>= 10; /* software strips receive CRC, so leave room for it */ @@ -3366,8 +3812,7 @@ void e1000e_reset(struct e1000_adapter *adapter) min_rx_space = ALIGN(min_rx_space, 1024); min_rx_space >>= 10; - /* - * If current Tx allocation is less than the min Tx FIFO size, + /* If current Tx allocation is less than the min Tx FIFO size, * and the min Tx FIFO size is less than the current Rx FIFO * allocation, take space away from current Rx allocation */ @@ -3375,103 +3820,112 @@ void e1000e_reset(struct e1000_adapter *adapter) ((min_tx_space - tx_space) < pba)) { pba -= min_tx_space - tx_space; - /* - * if short on Rx space, Rx wins and must trump Tx - * adjustment or use Early Receive if available + /* if short on Rx space, Rx wins and must trump Tx + * adjustment */ - if ((pba < min_rx_space) && - (!(adapter->flags & FLAG_HAS_ERT))) - /* ERT enabled in e1000_configure_rx */ + if (pba < min_rx_space) pba = min_rx_space; } ew32(PBA, pba); } - /* - * flow control settings + /* flow control settings * * The high water mark must be low enough to fit one full frame * (or the size used for early receive) above it in the Rx FIFO. * Set it to the lower of: * - 90% of the Rx FIFO size, and - * - the full Rx FIFO size minus the early receive size (for parts - * with ERT support assuming ERT set to E1000_ERT_2048), or * - the full Rx FIFO size minus one full frame */ if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME) fc->pause_time = 0xFFFF; else fc->pause_time = E1000_FC_PAUSE_TIME; - fc->send_xon = 1; + fc->send_xon = true; fc->current_mode = fc->requested_mode; switch (hw->mac.type) { + case e1000_ich9lan: + case e1000_ich10lan: + if (adapter->netdev->mtu > ETH_DATA_LEN) { + pba = 14; + ew32(PBA, pba); + fc->high_water = 0x2800; + fc->low_water = fc->high_water - 8; + break; + } + /* fall-through */ default: - if ((adapter->flags & FLAG_HAS_ERT) && - (adapter->netdev->mtu > ETH_DATA_LEN)) - hwm = min(((pba << 10) * 9 / 10), - ((pba << 10) - (E1000_ERT_2048 << 3))); - else - hwm = min(((pba << 10) * 9 / 10), - ((pba << 10) - adapter->max_frame_size)); + hwm = min(((pba << 10) * 9 / 10), + ((pba << 10) - adapter->max_frame_size)); - fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */ + fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */ fc->low_water = fc->high_water - 8; break; case e1000_pchlan: - /* - * Workaround PCH LOM adapter hangs with certain network + /* Workaround PCH LOM adapter hangs with certain network * loads. If hangs persist, try disabling Tx flow control. */ if (adapter->netdev->mtu > ETH_DATA_LEN) { fc->high_water = 0x3500; - fc->low_water = 0x1500; + fc->low_water = 0x1500; } else { fc->high_water = 0x5000; - fc->low_water = 0x3000; + fc->low_water = 0x3000; } fc->refresh_time = 0x1000; break; case e1000_pch2lan: - fc->high_water = 0x05C20; - fc->low_water = 0x05048; - fc->pause_time = 0x0650; + case e1000_pch_lpt: fc->refresh_time = 0x0400; - if (adapter->netdev->mtu > ETH_DATA_LEN) { - pba = 14; - ew32(PBA, pba); + + if (adapter->netdev->mtu <= ETH_DATA_LEN) { + fc->high_water = 0x05C20; + fc->low_water = 0x05048; + fc->pause_time = 0x0650; + break; } + + pba = 14; + ew32(PBA, pba); + fc->high_water = ((pba << 10) * 9 / 10) & E1000_FCRTH_RTH; + fc->low_water = ((pba << 10) * 8 / 10) & E1000_FCRTL_RTL; break; } - /* - * Disable Adaptive Interrupt Moderation if 2 full packets cannot - * fit in receive buffer and early-receive not supported. + /* Alignment of Tx data is on an arbitrary byte boundary with the + * maximum size per Tx descriptor limited only to the transmit + * allocation of the packet buffer minus 96 bytes with an upper + * limit of 24KB due to receive synchronization limitations. + */ + adapter->tx_fifo_limit = min_t(u32, ((er32(PBA) >> 16) << 10) - 96, + 24 << 10); + + /* Disable Adaptive Interrupt Moderation if 2 full packets cannot + * fit in receive buffer. */ if (adapter->itr_setting & 0x3) { - if (((adapter->max_frame_size * 2) > (pba << 10)) && - !(adapter->flags & FLAG_HAS_ERT)) { + if ((adapter->max_frame_size * 2) > (pba << 10)) { if (!(adapter->flags2 & FLAG2_DISABLE_AIM)) { dev_info(&adapter->pdev->dev, - "Interrupt Throttle Rate turned off\n"); + "Interrupt Throttle Rate off\n"); adapter->flags2 |= FLAG2_DISABLE_AIM; - ew32(ITR, 0); + e1000e_write_itr(adapter, 0); } } else if (adapter->flags2 & FLAG2_DISABLE_AIM) { dev_info(&adapter->pdev->dev, - "Interrupt Throttle Rate turned on\n"); + "Interrupt Throttle Rate on\n"); adapter->flags2 &= ~FLAG2_DISABLE_AIM; adapter->itr = 20000; - ew32(ITR, 1000000000 / (adapter->itr * 256)); + e1000e_write_itr(adapter, adapter->itr); } } /* Allow time for pending master requests to run */ mac->ops.reset_hw(hw); - /* - * For parts with AMT enabled, let the firmware know + /* For parts with AMT enabled, let the firmware know * that the network interface is in control */ if (adapter->flags & FLAG_HAS_AMT) @@ -3489,19 +3943,51 @@ void e1000e_reset(struct e1000_adapter *adapter) e1000e_reset_adaptive(hw); + /* initialize systim and reset the ns time counter */ + e1000e_config_hwtstamp(adapter, &adapter->hwtstamp_config); + + /* Set EEE advertisement as appropriate */ + if (adapter->flags2 & FLAG2_HAS_EEE) { + s32 ret_val; + u16 adv_addr; + + switch (hw->phy.type) { + case e1000_phy_82579: + adv_addr = I82579_EEE_ADVERTISEMENT; + break; + case e1000_phy_i217: + adv_addr = I217_EEE_ADVERTISEMENT; + break; + default: + dev_err(&adapter->pdev->dev, + "Invalid PHY type setting EEE advertisement\n"); + return; + } + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) { + dev_err(&adapter->pdev->dev, + "EEE advertisement - unable to acquire PHY\n"); + return; + } + + e1000_write_emi_reg_locked(hw, adv_addr, + hw->dev_spec.ich8lan.eee_disable ? + 0 : adapter->eee_advert); + + hw->phy.ops.release(hw); + } + if (!netif_running(adapter->netdev) && - !test_bit(__E1000_TESTING, &adapter->state)) { + !test_bit(__E1000_TESTING, &adapter->state)) e1000_power_down_phy(adapter); - return; - } e1000_get_phy_info(hw); if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) && !(adapter->flags & FLAG_SMART_POWER_DOWN)) { u16 phy_data = 0; - /* - * speed up time to link by disabling smart power down, ignore + /* speed up time to link by disabling smart power down, ignore * the return value of this function because there is nothing * different we would do if it failed */ @@ -3548,18 +4034,31 @@ static void e1000e_flush_descriptors(struct e1000_adapter *adapter) /* execute the writes immediately */ e1e_flush(); + + /* due to rare timing issues, write to TIDV/RDTR again to ensure the + * write is successful + */ + ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD); + ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD); + + /* execute the writes immediately */ + e1e_flush(); } static void e1000e_update_stats(struct e1000_adapter *adapter); -void e1000e_down(struct e1000_adapter *adapter) +/** + * e1000e_down - quiesce the device and optionally reset the hardware + * @adapter: board private structure + * @reset: boolean flag to reset the hardware or not + */ +void e1000e_down(struct e1000_adapter *adapter, bool reset) { struct net_device *netdev = adapter->netdev; struct e1000_hw *hw = &adapter->hw; u32 tctl, rctl; - /* - * signal that we're down so the interrupt handler does not + /* signal that we're down so the interrupt handler does not * reschedule our watchdog timer */ set_bit(__E1000_DOWN, &adapter->state); @@ -3583,6 +4082,8 @@ void e1000e_down(struct e1000_adapter *adapter) e1000_irq_disable(adapter); + napi_synchronize(&adapter->napi); + del_timer_sync(&adapter->watchdog_timer); del_timer_sync(&adapter->phy_info_timer); @@ -3593,19 +4094,20 @@ void e1000e_down(struct e1000_adapter *adapter) spin_unlock(&adapter->stats64_lock); e1000e_flush_descriptors(adapter); - e1000_clean_tx_ring(adapter); - e1000_clean_rx_ring(adapter); + e1000_clean_tx_ring(adapter->tx_ring); + e1000_clean_rx_ring(adapter->rx_ring); adapter->link_speed = 0; adapter->link_duplex = 0; - if (!pci_channel_offline(adapter->pdev)) - e1000e_reset(adapter); + /* Disable Si errata workaround on PCHx for jumbo frame flow */ + if ((hw->mac.type >= e1000_pch2lan) && + (adapter->netdev->mtu > ETH_DATA_LEN) && + e1000_lv_jumbo_workaround_ich8lan(hw, false)) + e_dbg("failed to disable jumbo frame workaround mode\n"); - /* - * TODO: for power management, we could drop the link and - * pci_disable_device here. - */ + if (reset && !pci_channel_offline(adapter->pdev)) + e1000e_reset(adapter); } void e1000e_reinit_locked(struct e1000_adapter *adapter) @@ -3613,12 +4115,55 @@ void e1000e_reinit_locked(struct e1000_adapter *adapter) might_sleep(); while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) usleep_range(1000, 2000); - e1000e_down(adapter); + e1000e_down(adapter, true); e1000e_up(adapter); clear_bit(__E1000_RESETTING, &adapter->state); } /** + * e1000e_cyclecounter_read - read raw cycle counter (used by time counter) + * @cc: cyclecounter structure + **/ +static cycle_t e1000e_cyclecounter_read(const struct cyclecounter *cc) +{ + struct e1000_adapter *adapter = container_of(cc, struct e1000_adapter, + cc); + struct e1000_hw *hw = &adapter->hw; + cycle_t systim, systim_next; + + /* latch SYSTIMH on read of SYSTIML */ + systim = (cycle_t)er32(SYSTIML); + systim |= (cycle_t)er32(SYSTIMH) << 32; + + if ((hw->mac.type == e1000_82574) || (hw->mac.type == e1000_82583)) { + u64 incvalue, time_delta, rem, temp; + int i; + + /* errata for 82574/82583 possible bad bits read from SYSTIMH/L + * check to see that the time is incrementing at a reasonable + * rate and is a multiple of incvalue + */ + incvalue = er32(TIMINCA) & E1000_TIMINCA_INCVALUE_MASK; + for (i = 0; i < E1000_MAX_82574_SYSTIM_REREADS; i++) { + /* latch SYSTIMH on read of SYSTIML */ + systim_next = (cycle_t)er32(SYSTIML); + systim_next |= (cycle_t)er32(SYSTIMH) << 32; + + time_delta = systim_next - systim; + temp = time_delta; + rem = do_div(temp, incvalue); + + systim = systim_next; + + if ((time_delta < E1000_82574_SYSTIM_EPSILON) && + (rem == 0)) + break; + } + } + return systim; +} + +/** * e1000_sw_init - Initialize general software structures (struct e1000_adapter) * @adapter: board private structure to initialize * @@ -3626,7 +4171,7 @@ void e1000e_reinit_locked(struct e1000_adapter *adapter) * Fields are initialized based on PCI device information and * OS network device settings (MTU size). **/ -static int __devinit e1000_sw_init(struct e1000_adapter *adapter) +static int e1000_sw_init(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; @@ -3634,6 +4179,8 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter) adapter->rx_ps_bsize0 = 128; adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN; adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; + adapter->tx_ring_count = E1000_DEFAULT_TXD; + adapter->rx_ring_count = E1000_DEFAULT_RXD; spin_lock_init(&adapter->stats64_lock); @@ -3642,6 +4189,17 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter) if (e1000_alloc_queues(adapter)) return -ENOMEM; + /* Setup hardware time stamping cyclecounter */ + if (adapter->flags & FLAG_HAS_HW_TIMESTAMP) { + adapter->cc.read = e1000e_cyclecounter_read; + adapter->cc.mask = CLOCKSOURCE_MASK(64); + adapter->cc.mult = 1; + /* cc.shift set in e1000e_get_base_tininca() */ + + spin_lock_init(&adapter->systim_lock); + INIT_WORK(&adapter->tx_hwtstamp_work, e1000e_tx_hwtstamp_work); + } + /* Explicitly disable IRQ since the NIC can be in any state. */ e1000_irq_disable(adapter); @@ -3654,7 +4212,7 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter) * @irq: interrupt number * @data: pointer to a network interface device structure **/ -static irqreturn_t e1000_intr_msi_test(int irq, void *data) +static irqreturn_t e1000_intr_msi_test(int __always_unused irq, void *data) { struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); @@ -3664,6 +4222,9 @@ static irqreturn_t e1000_intr_msi_test(int irq, void *data) e_dbg("icr is %08X\n", icr); if (icr & E1000_ICR_RXSEQ) { adapter->flags &= ~FLAG_MSI_TEST_FAILED; + /* Force memory writes to complete before acknowledging the + * interrupt is handled. + */ wmb(); } @@ -3691,7 +4252,8 @@ static int e1000_test_msi_interrupt(struct e1000_adapter *adapter) e1000e_reset_interrupt_capability(adapter); /* Assume that the test fails, if it succeeds then the test - * MSI irq handler will unset this flag */ + * MSI irq handler will unset this flag + */ adapter->flags |= FLAG_MSI_TEST_FAILED; err = pci_enable_msi(adapter->pdev); @@ -3705,6 +4267,9 @@ static int e1000_test_msi_interrupt(struct e1000_adapter *adapter) goto msi_test_failed; } + /* Force memory writes to complete before enabling and firing an + * interrupt. + */ wmb(); e1000_irq_enable(adapter); @@ -3712,17 +4277,18 @@ static int e1000_test_msi_interrupt(struct e1000_adapter *adapter) /* fire an unusual interrupt on the test handler */ ew32(ICS, E1000_ICS_RXSEQ); e1e_flush(); - msleep(50); + msleep(100); e1000_irq_disable(adapter); - rmb(); + rmb(); /* read flags after interrupt has been fired */ if (adapter->flags & FLAG_MSI_TEST_FAILED) { adapter->int_mode = E1000E_INT_MODE_LEGACY; e_info("MSI interrupt test failed, using legacy interrupt.\n"); - } else + } else { e_dbg("MSI interrupt test succeeded!\n"); + } free_irq(adapter->pdev->irq, netdev); pci_disable_msi(adapter->pdev); @@ -3792,17 +4358,16 @@ static int e1000_open(struct net_device *netdev) netif_carrier_off(netdev); /* allocate transmit descriptors */ - err = e1000e_setup_tx_resources(adapter); + err = e1000e_setup_tx_resources(adapter->tx_ring); if (err) goto err_setup_tx; /* allocate receive descriptors */ - err = e1000e_setup_rx_resources(adapter); + err = e1000e_setup_rx_resources(adapter->rx_ring); if (err) goto err_setup_rx; - /* - * If AMT is enabled, let the firmware know that the network + /* If AMT is enabled, let the firmware know that the network * interface is now open and reset the part to a known state. */ if (adapter->flags & FLAG_HAS_AMT) { @@ -3813,19 +4378,14 @@ static int e1000_open(struct net_device *netdev) e1000e_power_up_phy(adapter); adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; - if ((adapter->hw.mng_cookie.status & - E1000_MNG_DHCP_COOKIE_STATUS_VLAN)) + if ((adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN)) e1000_update_mng_vlan(adapter); - /* DMA latency requirement to workaround early-receive/jumbo issue */ - if ((adapter->flags & FLAG_HAS_ERT) || - (adapter->hw.mac.type == e1000_pch2lan)) - pm_qos_add_request(&adapter->netdev->pm_qos_req, - PM_QOS_CPU_DMA_LATENCY, - PM_QOS_DEFAULT_VALUE); + /* DMA latency requirement to workaround jumbo issue */ + pm_qos_add_request(&adapter->netdev->pm_qos_req, PM_QOS_CPU_DMA_LATENCY, + PM_QOS_DEFAULT_VALUE); - /* - * before we allocate an interrupt, we must be ready to handle it. + /* before we allocate an interrupt, we must be ready to handle it. * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt * as soon as we call pci_request_irq, so we have to setup our * clean_rx handler before we do so. @@ -3836,8 +4396,7 @@ static int e1000_open(struct net_device *netdev) if (err) goto err_req_irq; - /* - * Work around PCIe errata with MSI interrupts causing some chipsets to + /* Work around PCIe errata with MSI interrupts causing some chipsets to * ignore e1000e MSI messages, which means we need to test our MSI * interrupt now */ @@ -3859,7 +4418,7 @@ static int e1000_open(struct net_device *netdev) adapter->tx_hang_recheck = false; netif_start_queue(netdev); - adapter->idle_check = true; + hw->mac.get_link_status = true; pm_runtime_put(&pdev->dev); /* fire a link status change interrupt to start the watchdog */ @@ -3873,9 +4432,9 @@ static int e1000_open(struct net_device *netdev) err_req_irq: e1000e_release_hw_control(adapter); e1000_power_down_phy(adapter); - e1000e_free_rx_resources(adapter); + e1000e_free_rx_resources(adapter->rx_ring); err_setup_rx: - e1000e_free_tx_resources(adapter); + e1000e_free_tx_resources(adapter->tx_ring); err_setup_tx: e1000e_reset(adapter); pm_runtime_put_sync(&pdev->dev); @@ -3898,46 +4457,49 @@ static int e1000_close(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); struct pci_dev *pdev = adapter->pdev; + int count = E1000_CHECK_RESET_COUNT; + + while (test_bit(__E1000_RESETTING, &adapter->state) && count--) + usleep_range(10000, 20000); WARN_ON(test_bit(__E1000_RESETTING, &adapter->state)); pm_runtime_get_sync(&pdev->dev); - napi_disable(&adapter->napi); - if (!test_bit(__E1000_DOWN, &adapter->state)) { - e1000e_down(adapter); + e1000e_down(adapter, true); e1000_free_irq(adapter); + + /* Link status message must follow this format */ + pr_info("%s NIC Link is Down\n", adapter->netdev->name); } - e1000_power_down_phy(adapter); - e1000e_free_tx_resources(adapter); - e1000e_free_rx_resources(adapter); + napi_disable(&adapter->napi); + + e1000e_free_tx_resources(adapter->tx_ring); + e1000e_free_rx_resources(adapter->rx_ring); - /* - * kill manageability vlan ID if supported, but not if a vlan with + /* kill manageability vlan ID if supported, but not if a vlan with * the same ID is registered on the host OS (let 8021q kill it) */ - if (adapter->hw.mng_cookie.status & - E1000_MNG_DHCP_COOKIE_STATUS_VLAN) - e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id); + if (adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) + e1000_vlan_rx_kill_vid(netdev, htons(ETH_P_8021Q), + adapter->mng_vlan_id); - /* - * If AMT is enabled, let the firmware know that the network + /* If AMT is enabled, let the firmware know that the network * interface is now closed */ if ((adapter->flags & FLAG_HAS_AMT) && !test_bit(__E1000_TESTING, &adapter->state)) e1000e_release_hw_control(adapter); - if ((adapter->flags & FLAG_HAS_ERT) || - (adapter->hw.mac.type == e1000_pch2lan)) - pm_qos_remove_request(&adapter->netdev->pm_qos_req); + pm_qos_remove_request(&adapter->netdev->pm_qos_req); pm_runtime_put_sync(&pdev->dev); return 0; } + /** * e1000_set_mac - Change the Ethernet Address of the NIC * @netdev: network interface device structure @@ -3948,6 +4510,7 @@ static int e1000_close(struct net_device *netdev) static int e1000_set_mac(struct net_device *netdev, void *p) { struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; struct sockaddr *addr = p; if (!is_valid_ether_addr(addr->sa_data)) @@ -3956,23 +4519,21 @@ static int e1000_set_mac(struct net_device *netdev, void *p) memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); memcpy(adapter->hw.mac.addr, addr->sa_data, netdev->addr_len); - e1000e_rar_set(&adapter->hw, adapter->hw.mac.addr, 0); + hw->mac.ops.rar_set(&adapter->hw, adapter->hw.mac.addr, 0); if (adapter->flags & FLAG_RESET_OVERWRITES_LAA) { /* activate the work around */ e1000e_set_laa_state_82571(&adapter->hw, 1); - /* - * Hold a copy of the LAA in RAR[14] This is done so that + /* Hold a copy of the LAA in RAR[14] This is done so that * between the time RAR[0] gets clobbered and the time it * gets fixed (in e1000_watchdog), the actual LAA is in one * of the RARs and no incoming packets directed to this port * are dropped. Eventually the LAA will be in RAR[0] and * RAR[14] */ - e1000e_rar_set(&adapter->hw, - adapter->hw.mac.addr, - adapter->hw.mac.rar_entry_count - 1); + hw->mac.ops.rar_set(&adapter->hw, adapter->hw.mac.addr, + adapter->hw.mac.rar_entry_count - 1); } return 0; @@ -3989,21 +4550,30 @@ static int e1000_set_mac(struct net_device *netdev, void *p) static void e1000e_update_phy_task(struct work_struct *work) { struct e1000_adapter *adapter = container_of(work, - struct e1000_adapter, update_phy_task); + struct e1000_adapter, + update_phy_task); + struct e1000_hw *hw = &adapter->hw; if (test_bit(__E1000_DOWN, &adapter->state)) return; - e1000_get_phy_info(&adapter->hw); + e1000_get_phy_info(hw); + + /* Enable EEE on 82579 after link up */ + if (hw->phy.type >= e1000_phy_82579) + e1000_set_eee_pchlan(hw); } -/* +/** + * e1000_update_phy_info - timre call-back to update PHY info + * @data: pointer to adapter cast into an unsigned long + * * Need to wait a few seconds after link up to get diagnostic information from * the phy - */ + **/ static void e1000_update_phy_info(unsigned long data) { - struct e1000_adapter *adapter = (struct e1000_adapter *) data; + struct e1000_adapter *adapter = (struct e1000_adapter *)data; if (test_bit(__E1000_DOWN, &adapter->state)) return; @@ -4027,8 +4597,7 @@ static void e1000e_update_phy_stats(struct e1000_adapter *adapter) if (ret_val) return; - /* - * A page set is expensive so check if already on desired page. + /* A page set is expensive so check if already on desired page. * If not, set to the page with the PHY status registers. */ hw->phy.addr = 1; @@ -4099,8 +4668,7 @@ static void e1000e_update_stats(struct e1000_adapter *adapter) struct e1000_hw *hw = &adapter->hw; struct pci_dev *pdev = adapter->pdev; - /* - * Prevent stats update while adapter is being reset, or if the pci + /* Prevent stats update while adapter is being reset, or if the pci * connection is down. */ if (adapter->link_speed == 0) @@ -4111,7 +4679,7 @@ static void e1000e_update_stats(struct e1000_adapter *adapter) adapter->stats.crcerrs += er32(CRCERRS); adapter->stats.gprc += er32(GPRC); adapter->stats.gorc += er32(GORCL); - er32(GORCH); /* Clear gorc */ + er32(GORCH); /* Clear gorc */ adapter->stats.bprc += er32(BPRC); adapter->stats.mprc += er32(MPRC); adapter->stats.roc += er32(ROC); @@ -4144,7 +4712,7 @@ static void e1000e_update_stats(struct e1000_adapter *adapter) adapter->stats.xofftxc += er32(XOFFTXC); adapter->stats.gptc += er32(GPTC); adapter->stats.gotc += er32(GOTCL); - er32(GOTCH); /* Clear gotc */ + er32(GOTCH); /* Clear gotc */ adapter->stats.rnbc += er32(RNBC); adapter->stats.ruc += er32(RUC); @@ -4168,23 +4736,20 @@ static void e1000e_update_stats(struct e1000_adapter *adapter) /* Rx Errors */ - /* - * RLEC on some newer hardware can be incorrect so build + /* RLEC on some newer hardware can be incorrect so build * our own version based on RUC and ROC */ netdev->stats.rx_errors = adapter->stats.rxerrc + - adapter->stats.crcerrs + adapter->stats.algnerrc + - adapter->stats.ruc + adapter->stats.roc + - adapter->stats.cexterr; + adapter->stats.crcerrs + adapter->stats.algnerrc + + adapter->stats.ruc + adapter->stats.roc + adapter->stats.cexterr; netdev->stats.rx_length_errors = adapter->stats.ruc + - adapter->stats.roc; + adapter->stats.roc; netdev->stats.rx_crc_errors = adapter->stats.crcerrs; netdev->stats.rx_frame_errors = adapter->stats.algnerrc; netdev->stats.rx_missed_errors = adapter->stats.mpc; /* Tx Errors */ - netdev->stats.tx_errors = adapter->stats.ecol + - adapter->stats.latecol; + netdev->stats.tx_errors = adapter->stats.ecol + adapter->stats.latecol; netdev->stats.tx_aborted_errors = adapter->stats.ecol; netdev->stats.tx_window_errors = adapter->stats.latecol; netdev->stats.tx_carrier_errors = adapter->stats.tncrs; @@ -4195,6 +4760,17 @@ static void e1000e_update_stats(struct e1000_adapter *adapter) adapter->stats.mgptc += er32(MGTPTC); adapter->stats.mgprc += er32(MGTPRC); adapter->stats.mgpdc += er32(MGTPDC); + + /* Correctable ECC Errors */ + if (hw->mac.type == e1000_pch_lpt) { + u32 pbeccsts = er32(PBECCSTS); + + adapter->corr_errors += + pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK; + adapter->uncorr_errors += + (pbeccsts & E1000_PBECCSTS_UNCORR_ERR_CNT_MASK) >> + E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT; + } } /** @@ -4206,23 +4782,23 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) struct e1000_hw *hw = &adapter->hw; struct e1000_phy_regs *phy = &adapter->phy_regs; - if ((er32(STATUS) & E1000_STATUS_LU) && + if (!pm_runtime_suspended((&adapter->pdev->dev)->parent) && + (er32(STATUS) & E1000_STATUS_LU) && (adapter->hw.phy.media_type == e1000_media_type_copper)) { int ret_val; - ret_val = e1e_rphy(hw, PHY_CONTROL, &phy->bmcr); - ret_val |= e1e_rphy(hw, PHY_STATUS, &phy->bmsr); - ret_val |= e1e_rphy(hw, PHY_AUTONEG_ADV, &phy->advertise); - ret_val |= e1e_rphy(hw, PHY_LP_ABILITY, &phy->lpa); - ret_val |= e1e_rphy(hw, PHY_AUTONEG_EXP, &phy->expansion); - ret_val |= e1e_rphy(hw, PHY_1000T_CTRL, &phy->ctrl1000); - ret_val |= e1e_rphy(hw, PHY_1000T_STATUS, &phy->stat1000); - ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus); + ret_val = e1e_rphy(hw, MII_BMCR, &phy->bmcr); + ret_val |= e1e_rphy(hw, MII_BMSR, &phy->bmsr); + ret_val |= e1e_rphy(hw, MII_ADVERTISE, &phy->advertise); + ret_val |= e1e_rphy(hw, MII_LPA, &phy->lpa); + ret_val |= e1e_rphy(hw, MII_EXPANSION, &phy->expansion); + ret_val |= e1e_rphy(hw, MII_CTRL1000, &phy->ctrl1000); + ret_val |= e1e_rphy(hw, MII_STAT1000, &phy->stat1000); + ret_val |= e1e_rphy(hw, MII_ESTATUS, &phy->estatus); if (ret_val) e_warn("Error reading PHY register\n"); } else { - /* - * Do not read PHY registers if link is not up + /* Do not read PHY registers if link is not up * Set values to typical power-on defaults */ phy->bmcr = (BMCR_SPEED1000 | BMCR_ANENABLE | BMCR_FULLDPLX); @@ -4245,9 +4821,8 @@ static void e1000_print_link_info(struct e1000_adapter *adapter) u32 ctrl = er32(CTRL); /* Link status message must follow this format for user tools */ - printk(KERN_INFO "e1000e: %s NIC Link is Up %d Mbps %s Duplex, Flow Control: %s\n", - adapter->netdev->name, - adapter->link_speed, + pr_info("%s NIC Link is Up %d Mbps %s Duplex, Flow Control: %s\n", + adapter->netdev->name, adapter->link_speed, adapter->link_duplex == FULL_DUPLEX ? "Full" : "Half", (ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE) ? "Rx/Tx" : (ctrl & E1000_CTRL_RFCE) ? "Rx" : @@ -4260,8 +4835,7 @@ static bool e1000e_has_link(struct e1000_adapter *adapter) bool link_active = false; s32 ret_val = 0; - /* - * get_link_status is set on LSC (link status) interrupt or + /* get_link_status is set on LSC (link status) interrupt or * Rx sequence error interrupt. get_link_status will stay * false until the check_for_link establishes link * for copper adapters ONLY @@ -4301,11 +4875,12 @@ static void e1000e_enable_receives(struct e1000_adapter *adapter) { /* make sure the receive unit is started */ if ((adapter->flags & FLAG_RX_NEEDS_RESTART) && - (adapter->flags & FLAG_RX_RESTART_NOW)) { + (adapter->flags & FLAG_RESTART_NOW)) { struct e1000_hw *hw = &adapter->hw; u32 rctl = er32(RCTL); + ew32(RCTL, rctl | E1000_RCTL_EN); - adapter->flags &= ~FLAG_RX_RESTART_NOW; + adapter->flags &= ~FLAG_RESTART_NOW; } } @@ -4313,8 +4888,7 @@ static void e1000e_check_82574_phy_workaround(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; - /* - * With 82574 controllers, PHY needs to be checked periodically + /* With 82574 controllers, PHY needs to be checked periodically * for hung state and reset, if two calls return true */ if (e1000_check_phy_82574(hw)) @@ -4324,6 +4898,7 @@ static void e1000e_check_82574_phy_workaround(struct e1000_adapter *adapter) if (adapter->phy_hang_count > 1) { adapter->phy_hang_count = 0; + e_dbg("PHY appears hung - resetting\n"); schedule_work(&adapter->reset_task); } } @@ -4334,7 +4909,7 @@ static void e1000e_check_82574_phy_workaround(struct e1000_adapter *adapter) **/ static void e1000_watchdog(unsigned long data) { - struct e1000_adapter *adapter = (struct e1000_adapter *) data; + struct e1000_adapter *adapter = (struct e1000_adapter *)data; /* Do the rest outside of interrupt context */ schedule_work(&adapter->watchdog_task); @@ -4345,7 +4920,8 @@ static void e1000_watchdog(unsigned long data) static void e1000_watchdog_task(struct work_struct *work) { struct e1000_adapter *adapter = container_of(work, - struct e1000_adapter, watchdog_task); + struct e1000_adapter, + watchdog_task); struct net_device *netdev = adapter->netdev; struct e1000_mac_info *mac = &adapter->hw.mac; struct e1000_phy_info *phy = &adapter->hw.phy; @@ -4379,24 +4955,30 @@ static void e1000_watchdog_task(struct work_struct *work) /* update snapshot of PHY registers on LSC */ e1000_phy_read_status(adapter); mac->ops.get_link_up_info(&adapter->hw, - &adapter->link_speed, - &adapter->link_duplex); + &adapter->link_speed, + &adapter->link_duplex); e1000_print_link_info(adapter); - /* - * On supported PHYs, check for duplex mismatch only + + /* check if SmartSpeed worked */ + e1000e_check_downshift(hw); + if (phy->speed_downgraded) + netdev_warn(netdev, + "Link Speed was downgraded by SmartSpeed\n"); + + /* On supported PHYs, check for duplex mismatch only * if link has autonegotiated at 10/100 half */ if ((hw->phy.type == e1000_phy_igp_3 || hw->phy.type == e1000_phy_bm) && - (hw->mac.autoneg == true) && + hw->mac.autoneg && (adapter->link_speed == SPEED_10 || adapter->link_speed == SPEED_100) && (adapter->link_duplex == HALF_DUPLEX)) { u16 autoneg_exp; - e1e_rphy(hw, PHY_AUTONEG_EXP, &autoneg_exp); + e1e_rphy(hw, MII_EXPANSION, &autoneg_exp); - if (!(autoneg_exp & NWAY_ER_LP_NWAY_CAPS)) + if (!(autoneg_exp & EXPANSION_NWAY)) e_info("Autonegotiated half duplex but link partner cannot autoneg. Try forcing full duplex if link gets many collisions.\n"); } @@ -4413,20 +4995,19 @@ static void e1000_watchdog_task(struct work_struct *work) break; } - /* - * workaround: re-program speed mode bit after + /* workaround: re-program speed mode bit after * link-up event */ if ((adapter->flags & FLAG_TARC_SPEED_MODE_BIT) && !txb2b) { u32 tarc0; + tarc0 = er32(TARC(0)); tarc0 &= ~SPEED_MODE_BIT; ew32(TARC(0), tarc0); } - /* - * disable TSO for pcie and 10/100 speeds, to avoid + /* disable TSO for pcie and 10/100 speeds, to avoid * some hardware issues */ if (!(adapter->flags & FLAG_TSO_FORCE)) { @@ -4447,16 +5028,14 @@ static void e1000_watchdog_task(struct work_struct *work) } } - /* - * enable transmits in the hardware, need to do this + /* enable transmits in the hardware, need to do this * after setting TARC(0) */ tctl = er32(TCTL); tctl |= E1000_TCTL_EN; ew32(TCTL, tctl); - /* - * Perform any post-link-up configuration before + /* Perform any post-link-up configuration before * reporting link up. */ if (phy->ops.cfg_on_link_up) @@ -4473,18 +5052,21 @@ static void e1000_watchdog_task(struct work_struct *work) adapter->link_speed = 0; adapter->link_duplex = 0; /* Link status message must follow this format */ - printk(KERN_INFO "e1000e: %s NIC Link is Down\n", - adapter->netdev->name); + pr_info("%s NIC Link is Down\n", adapter->netdev->name); netif_carrier_off(netdev); if (!test_bit(__E1000_DOWN, &adapter->state)) mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ)); + /* 8000ES2LAN requires a Rx packet buffer work-around + * on link down event; reset the controller to flush + * the Rx packet buffer. + */ if (adapter->flags & FLAG_RX_NEEDS_RESTART) - schedule_work(&adapter->reset_task); + adapter->flags |= FLAG_RESTART_NOW; else pm_schedule_suspend(netdev->dev.parent, - LINK_TIMEOUT); + LINK_TIMEOUT); } } @@ -4503,35 +5085,36 @@ link_up: adapter->gotc_old = adapter->stats.gotc; spin_unlock(&adapter->stats64_lock); - e1000e_update_adaptive(&adapter->hw); - + /* If the link is lost the controller stops DMA, but + * if there is queued Tx work it cannot be done. So + * reset the controller to flush the Tx packet buffers. + */ if (!netif_carrier_ok(netdev) && - (e1000_desc_unused(tx_ring) + 1 < tx_ring->count)) { - /* - * We've lost link, so the controller stops DMA, - * but we've got queued Tx work that's never going - * to get done, so reset controller to flush Tx. - * (Do the reset outside of interrupt context). - */ + (e1000_desc_unused(tx_ring) + 1 < tx_ring->count)) + adapter->flags |= FLAG_RESTART_NOW; + + /* If reset is necessary, do it outside of interrupt context. */ + if (adapter->flags & FLAG_RESTART_NOW) { schedule_work(&adapter->reset_task); /* return immediately since reset is imminent */ return; } + e1000e_update_adaptive(&adapter->hw); + /* Simple mode for Interrupt Throttle Rate (ITR) */ if (adapter->itr_setting == 4) { - /* - * Symmetric Tx/Rx gets a reduced ITR=2000; + /* Symmetric Tx/Rx gets a reduced ITR=2000; * Total asymmetrical Tx or Rx gets ITR=8000; * everyone else is between 2000-8000. */ u32 goc = (adapter->gotc + adapter->gorc) / 10000; u32 dif = (adapter->gotc > adapter->gorc ? - adapter->gotc - adapter->gorc : - adapter->gorc - adapter->gotc) / 10000; + adapter->gotc - adapter->gorc : + adapter->gorc - adapter->gotc) / 10000; u32 itr = goc > 0 ? (dif * 6000 / goc + 2000) : 8000; - ew32(ITR, 1000000000 / (itr * 256)); + e1000e_write_itr(adapter, itr); } /* Cause software interrupt to ensure Rx ring is cleaned */ @@ -4546,16 +5129,26 @@ link_up: /* Force detection of hung controller every watchdog period */ adapter->detect_tx_hung = true; - /* - * With 82571 controllers, LAA may be overwritten due to controller + /* With 82571 controllers, LAA may be overwritten due to controller * reset from the other port. Set the appropriate LAA in RAR[0] */ if (e1000e_get_laa_state_82571(hw)) - e1000e_rar_set(hw, adapter->hw.mac.addr, 0); + hw->mac.ops.rar_set(hw, adapter->hw.mac.addr, 0); if (adapter->flags2 & FLAG2_CHECK_PHY_HANG) e1000e_check_82574_phy_workaround(adapter); + /* Clear valid timestamp stuck in RXSTMPL/H due to a Rx error */ + if (adapter->hwtstamp_config.rx_filter != HWTSTAMP_FILTER_NONE) { + if ((adapter->flags2 & FLAG2_CHECK_RX_HWTSTAMP) && + (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID)) { + er32(RXSTMPH); + adapter->rx_hwtstamp_cleared++; + } else { + adapter->flags2 |= FLAG2_CHECK_RX_HWTSTAMP; + } + } + /* Reset the timer */ if (!test_bit(__E1000_DOWN, &adapter->state)) mod_timer(&adapter->watchdog_timer, @@ -4566,29 +5159,27 @@ link_up: #define E1000_TX_FLAGS_VLAN 0x00000002 #define E1000_TX_FLAGS_TSO 0x00000004 #define E1000_TX_FLAGS_IPV4 0x00000008 +#define E1000_TX_FLAGS_NO_FCS 0x00000010 +#define E1000_TX_FLAGS_HWTSTAMP 0x00000020 #define E1000_TX_FLAGS_VLAN_MASK 0xffff0000 #define E1000_TX_FLAGS_VLAN_SHIFT 16 -static int e1000_tso(struct e1000_adapter *adapter, - struct sk_buff *skb) +static int e1000_tso(struct e1000_ring *tx_ring, struct sk_buff *skb) { - struct e1000_ring *tx_ring = adapter->tx_ring; struct e1000_context_desc *context_desc; struct e1000_buffer *buffer_info; unsigned int i; u32 cmd_length = 0; - u16 ipcse = 0, tucse, mss; + u16 ipcse = 0, mss; u8 ipcss, ipcso, tucss, tucso, hdr_len; + int err; if (!skb_is_gso(skb)) return 0; - if (skb_header_cloned(skb)) { - int err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); - - if (err) - return err; - } + err = skb_cow_head(skb, 0); + if (err < 0) + return err; hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); mss = skb_shinfo(skb)->gso_size; @@ -4597,36 +5188,35 @@ static int e1000_tso(struct e1000_adapter *adapter, iph->tot_len = 0; iph->check = 0; tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr, - 0, IPPROTO_TCP, 0); + 0, IPPROTO_TCP, 0); cmd_length = E1000_TXD_CMD_IP; ipcse = skb_transport_offset(skb) - 1; } else if (skb_is_gso_v6(skb)) { ipv6_hdr(skb)->payload_len = 0; tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, - &ipv6_hdr(skb)->daddr, - 0, IPPROTO_TCP, 0); + &ipv6_hdr(skb)->daddr, + 0, IPPROTO_TCP, 0); ipcse = 0; } ipcss = skb_network_offset(skb); ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data; tucss = skb_transport_offset(skb); tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data; - tucse = 0; cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE | - E1000_TXD_CMD_TCP | (skb->len - (hdr_len))); + E1000_TXD_CMD_TCP | (skb->len - (hdr_len))); i = tx_ring->next_to_use; context_desc = E1000_CONTEXT_DESC(*tx_ring, i); buffer_info = &tx_ring->buffer_info[i]; - context_desc->lower_setup.ip_fields.ipcss = ipcss; - context_desc->lower_setup.ip_fields.ipcso = ipcso; - context_desc->lower_setup.ip_fields.ipcse = cpu_to_le16(ipcse); + context_desc->lower_setup.ip_fields.ipcss = ipcss; + context_desc->lower_setup.ip_fields.ipcso = ipcso; + context_desc->lower_setup.ip_fields.ipcse = cpu_to_le16(ipcse); context_desc->upper_setup.tcp_fields.tucss = tucss; context_desc->upper_setup.tcp_fields.tucso = tucso; - context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse); - context_desc->tcp_seg_setup.fields.mss = cpu_to_le16(mss); + context_desc->upper_setup.tcp_fields.tucse = 0; + context_desc->tcp_seg_setup.fields.mss = cpu_to_le16(mss); context_desc->tcp_seg_setup.fields.hdr_len = hdr_len; context_desc->cmd_and_length = cpu_to_le32(cmd_length); @@ -4641,9 +5231,9 @@ static int e1000_tso(struct e1000_adapter *adapter, return 1; } -static bool e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb) +static bool e1000_tx_csum(struct e1000_ring *tx_ring, struct sk_buff *skb) { - struct e1000_ring *tx_ring = adapter->tx_ring; + struct e1000_adapter *adapter = tx_ring->adapter; struct e1000_context_desc *context_desc; struct e1000_buffer *buffer_info; unsigned int i; @@ -4652,7 +5242,7 @@ static bool e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb) __be16 protocol; if (skb->ip_summed != CHECKSUM_PARTIAL) - return 0; + return false; if (skb->protocol == cpu_to_be16(ETH_P_8021Q)) protocol = vlan_eth_hdr(skb)->h_vlan_encapsulated_proto; @@ -4684,8 +5274,7 @@ static bool e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb) context_desc->lower_setup.ip_config = 0; context_desc->upper_setup.tcp_fields.tucss = css; - context_desc->upper_setup.tcp_fields.tucso = - css + skb->csum_offset; + context_desc->upper_setup.tcp_fields.tucso = css + skb->csum_offset; context_desc->upper_setup.tcp_fields.tucse = 0; context_desc->tcp_seg_setup.data = 0; context_desc->cmd_and_length = cpu_to_le32(cmd_len); @@ -4698,18 +5287,14 @@ static bool e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb) i = 0; tx_ring->next_to_use = i; - return 1; + return true; } -#define E1000_MAX_PER_TXD 8192 -#define E1000_MAX_TXD_PWR 12 - -static int e1000_tx_map(struct e1000_adapter *adapter, - struct sk_buff *skb, unsigned int first, - unsigned int max_per_txd, unsigned int nr_frags, - unsigned int mss) +static int e1000_tx_map(struct e1000_ring *tx_ring, struct sk_buff *skb, + unsigned int first, unsigned int max_per_txd, + unsigned int nr_frags) { - struct e1000_ring *tx_ring = adapter->tx_ring; + struct e1000_adapter *adapter = tx_ring->adapter; struct pci_dev *pdev = adapter->pdev; struct e1000_buffer *buffer_info; unsigned int len = skb_headlen(skb); @@ -4762,7 +5347,8 @@ static int e1000_tx_map(struct e1000_adapter *adapter, buffer_info->time_stamp = jiffies; buffer_info->next_to_watch = i; buffer_info->dma = skb_frag_dma_map(&pdev->dev, frag, - offset, size, DMA_TO_DEVICE); + offset, size, + DMA_TO_DEVICE); buffer_info->mapped_as_page = true; if (dma_mapping_error(&pdev->dev, buffer_info->dma)) goto dma_error; @@ -4795,16 +5381,15 @@ dma_error: i += tx_ring->count; i--; buffer_info = &tx_ring->buffer_info[i]; - e1000_put_txbuf(adapter, buffer_info); + e1000_put_txbuf(tx_ring, buffer_info); } return 0; } -static void e1000_tx_queue(struct e1000_adapter *adapter, - int tx_flags, int count) +static void e1000_tx_queue(struct e1000_ring *tx_ring, int tx_flags, int count) { - struct e1000_ring *tx_ring = adapter->tx_ring; + struct e1000_adapter *adapter = tx_ring->adapter; struct e1000_tx_desc *tx_desc = NULL; struct e1000_buffer *buffer_info; u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS; @@ -4812,7 +5397,7 @@ static void e1000_tx_queue(struct e1000_adapter *adapter, if (tx_flags & E1000_TX_FLAGS_TSO) { txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D | - E1000_TXD_CMD_TSE; + E1000_TXD_CMD_TSE; txd_upper |= E1000_TXD_POPTS_TXSM << 8; if (tx_flags & E1000_TX_FLAGS_IPV4) @@ -4829,14 +5414,22 @@ static void e1000_tx_queue(struct e1000_adapter *adapter, txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK); } + if (unlikely(tx_flags & E1000_TX_FLAGS_NO_FCS)) + txd_lower &= ~(E1000_TXD_CMD_IFCS); + + if (unlikely(tx_flags & E1000_TX_FLAGS_HWTSTAMP)) { + txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D; + txd_upper |= E1000_TXD_EXTCMD_TSTAMP; + } + i = tx_ring->next_to_use; do { buffer_info = &tx_ring->buffer_info[i]; tx_desc = E1000_TX_DESC(*tx_ring, i); tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma); - tx_desc->lower.data = - cpu_to_le32(txd_lower | buffer_info->length); + tx_desc->lower.data = cpu_to_le32(txd_lower | + buffer_info->length); tx_desc->upper.data = cpu_to_le32(txd_upper); i++; @@ -4846,8 +5439,11 @@ static void e1000_tx_queue(struct e1000_adapter *adapter, tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd); - /* - * Force memory writes to complete before letting h/w + /* txd_cmd re-enables FCS, so we'll re-disable it here as desired. */ + if (unlikely(tx_flags & E1000_TX_FLAGS_NO_FCS)) + tx_desc->lower.data &= ~(cpu_to_le32(E1000_TXD_CMD_IFCS)); + + /* Force memory writes to complete before letting h/w * know there are new descriptors to fetch. (Only * applicable for weak-ordered memory model archs, * such as IA-64). @@ -4857,12 +5453,11 @@ static void e1000_tx_queue(struct e1000_adapter *adapter, tx_ring->next_to_use = i; if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) - e1000e_update_tdt_wa(adapter, i); + e1000e_update_tdt_wa(tx_ring, i); else - writel(i, adapter->hw.hw_addr + tx_ring->tail); + writel(i, tx_ring->tail); - /* - * we need this if more than one processor can write to our tail + /* we need this if more than one processor can write to our tail * at a time, it synchronizes IO on IA64/Altix systems */ mmiowb(); @@ -4872,24 +5467,23 @@ static void e1000_tx_queue(struct e1000_adapter *adapter, static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter, struct sk_buff *skb) { - struct e1000_hw *hw = &adapter->hw; + struct e1000_hw *hw = &adapter->hw; u16 length, offset; - if (vlan_tx_tag_present(skb)) { - if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) && - (adapter->hw.mng_cookie.status & - E1000_MNG_DHCP_COOKIE_STATUS_VLAN))) - return 0; - } + if (vlan_tx_tag_present(skb) && + !((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) && + (adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN))) + return 0; if (skb->len <= MINIMUM_DHCP_PACKET_SIZE) return 0; - if (((struct ethhdr *) skb->data)->h_proto != htons(ETH_P_IP)) + if (((struct ethhdr *)skb->data)->h_proto != htons(ETH_P_IP)) return 0; { - const struct iphdr *ip = (struct iphdr *)((u8 *)skb->data+14); + const struct iphdr *ip = (struct iphdr *)((u8 *)skb->data + 14); struct udphdr *udp; if (ip->protocol != IPPROTO_UDP) @@ -4907,49 +5501,44 @@ static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter, return 0; } -static int __e1000_maybe_stop_tx(struct net_device *netdev, int size) +static int __e1000_maybe_stop_tx(struct e1000_ring *tx_ring, int size) { - struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_adapter *adapter = tx_ring->adapter; - netif_stop_queue(netdev); - /* - * Herbert's original patch had: + netif_stop_queue(adapter->netdev); + /* Herbert's original patch had: * smp_mb__after_netif_stop_queue(); * but since that doesn't exist yet, just open code it. */ smp_mb(); - /* - * We need to check again in a case another CPU has just + /* We need to check again in a case another CPU has just * made room available. */ - if (e1000_desc_unused(adapter->tx_ring) < size) + if (e1000_desc_unused(tx_ring) < size) return -EBUSY; /* A reprieve! */ - netif_start_queue(netdev); + netif_start_queue(adapter->netdev); ++adapter->restart_queue; return 0; } -static int e1000_maybe_stop_tx(struct net_device *netdev, int size) +static int e1000_maybe_stop_tx(struct e1000_ring *tx_ring, int size) { - struct e1000_adapter *adapter = netdev_priv(netdev); + BUG_ON(size > tx_ring->count); - if (e1000_desc_unused(adapter->tx_ring) >= size) + if (e1000_desc_unused(tx_ring) >= size) return 0; - return __e1000_maybe_stop_tx(netdev, size); + return __e1000_maybe_stop_tx(tx_ring, size); } -#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 ) static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_ring *tx_ring = adapter->tx_ring; unsigned int first; - unsigned int max_per_txd = E1000_MAX_PER_TXD; - unsigned int max_txd_pwr = E1000_MAX_TXD_PWR; unsigned int tx_flags = 0; unsigned int len = skb_headlen(skb); unsigned int nr_frags; @@ -4968,34 +5557,32 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, return NETDEV_TX_OK; } - mss = skb_shinfo(skb)->gso_size; - /* - * The controller does a simple calculation to - * make sure there is enough room in the FIFO before - * initiating the DMA for each buffer. The calc is: - * 4 = ceil(buffer len/mss). To make sure we don't - * overrun the FIFO, adjust the max buffer len if mss - * drops. + /* The minimum packet size with TCTL.PSP set is 17 bytes so + * pad skb in order to meet this minimum size requirement */ + if (unlikely(skb->len < 17)) { + if (skb_pad(skb, 17 - skb->len)) + return NETDEV_TX_OK; + skb->len = 17; + skb_set_tail_pointer(skb, 17); + } + + mss = skb_shinfo(skb)->gso_size; if (mss) { u8 hdr_len; - max_per_txd = min(mss << 2, max_per_txd); - max_txd_pwr = fls(max_per_txd) - 1; - /* - * TSO Workaround for 82571/2/3 Controllers -- if skb->data + /* TSO Workaround for 82571/2/3 Controllers -- if skb->data * points to just header, pull a few bytes of payload from * frags into skb->data */ hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); - /* - * we do this workaround for ES2LAN, but it is un-necessary, + /* we do this workaround for ES2LAN, but it is un-necessary, * avoiding it could save a lot of cycles */ if (skb->data_len && (hdr_len == len)) { unsigned int pull_size; - pull_size = min((unsigned int)4, skb->data_len); + pull_size = min_t(unsigned int, 4, skb->data_len); if (!__pskb_pull_tail(skb, pull_size)) { e_err("__pskb_pull_tail failed.\n"); dev_kfree_skb_any(skb); @@ -5010,21 +5597,20 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, count++; count++; - count += TXD_USE_COUNT(len, max_txd_pwr); + count += DIV_ROUND_UP(len, adapter->tx_fifo_limit); nr_frags = skb_shinfo(skb)->nr_frags; for (f = 0; f < nr_frags; f++) - count += TXD_USE_COUNT(skb_frag_size(&skb_shinfo(skb)->frags[f]), - max_txd_pwr); + count += DIV_ROUND_UP(skb_frag_size(&skb_shinfo(skb)->frags[f]), + adapter->tx_fifo_limit); if (adapter->hw.mac.tx_pkt_filtering) e1000_transfer_dhcp_info(adapter, skb); - /* - * need: count + 2 desc gap to keep tail from touching + /* need: count + 2 desc gap to keep tail from touching * head, otherwise try next time */ - if (e1000_maybe_stop_tx(netdev, count + 2)) + if (e1000_maybe_stop_tx(tx_ring, count + 2)) return NETDEV_TX_BUSY; if (vlan_tx_tag_present(skb)) { @@ -5034,7 +5620,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, first = tx_ring->next_to_use; - tso = e1000_tso(adapter, skb); + tso = e1000_tso(tx_ring, skb); if (tso < 0) { dev_kfree_skb_any(skb); return NETDEV_TX_OK; @@ -5042,25 +5628,41 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, if (tso) tx_flags |= E1000_TX_FLAGS_TSO; - else if (e1000_tx_csum(adapter, skb)) + else if (e1000_tx_csum(tx_ring, skb)) tx_flags |= E1000_TX_FLAGS_CSUM; - /* - * Old method was to assume IPv4 packet by default if TSO was enabled. + /* Old method was to assume IPv4 packet by default if TSO was enabled. * 82571 hardware supports TSO capabilities for IPv6 as well... * no longer assume, we must. */ if (skb->protocol == htons(ETH_P_IP)) tx_flags |= E1000_TX_FLAGS_IPV4; + if (unlikely(skb->no_fcs)) + tx_flags |= E1000_TX_FLAGS_NO_FCS; + /* if count is 0 then mapping error has occurred */ - count = e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss); + count = e1000_tx_map(tx_ring, skb, first, adapter->tx_fifo_limit, + nr_frags); if (count) { + if (unlikely((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && + !adapter->tx_hwtstamp_skb)) { + skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; + tx_flags |= E1000_TX_FLAGS_HWTSTAMP; + adapter->tx_hwtstamp_skb = skb_get(skb); + adapter->tx_hwtstamp_start = jiffies; + schedule_work(&adapter->tx_hwtstamp_work); + } else { + skb_tx_timestamp(skb); + } + netdev_sent_queue(netdev, skb->len); - e1000_tx_queue(adapter, tx_flags, count); + e1000_tx_queue(tx_ring, tx_flags, count); /* Make sure there is space in the ring for the next send. */ - e1000_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 2); - + e1000_maybe_stop_tx(tx_ring, + (MAX_SKB_FRAGS * + DIV_ROUND_UP(PAGE_SIZE, + adapter->tx_fifo_limit) + 2)); } else { dev_kfree_skb_any(skb); tx_ring->buffer_info[first].time_stamp = 0; @@ -5092,10 +5694,9 @@ static void e1000_reset_task(struct work_struct *work) if (test_bit(__E1000_DOWN, &adapter->state)) return; - if (!((adapter->flags & FLAG_RX_NEEDS_RESTART) && - (adapter->flags & FLAG_RX_RESTART_NOW))) { + if (!(adapter->flags & FLAG_RESTART_NOW)) { e1000e_dump(adapter); - e_err("Reset adapter\n"); + e_err("Reset adapter unexpectedly\n"); } e1000e_reinit_locked(adapter); } @@ -5108,7 +5709,7 @@ static void e1000_reset_task(struct work_struct *work) * Returns the address of the device statistics structure. **/ struct rtnl_link_stats64 *e1000e_get_stats64(struct net_device *netdev, - struct rtnl_link_stats64 *stats) + struct rtnl_link_stats64 *stats) { struct e1000_adapter *adapter = netdev_priv(netdev); @@ -5125,23 +5726,19 @@ struct rtnl_link_stats64 *e1000e_get_stats64(struct net_device *netdev, /* Rx Errors */ - /* - * RLEC on some newer hardware can be incorrect so build + /* RLEC on some newer hardware can be incorrect so build * our own version based on RUC and ROC */ stats->rx_errors = adapter->stats.rxerrc + - adapter->stats.crcerrs + adapter->stats.algnerrc + - adapter->stats.ruc + adapter->stats.roc + - adapter->stats.cexterr; - stats->rx_length_errors = adapter->stats.ruc + - adapter->stats.roc; + adapter->stats.crcerrs + adapter->stats.algnerrc + + adapter->stats.ruc + adapter->stats.roc + adapter->stats.cexterr; + stats->rx_length_errors = adapter->stats.ruc + adapter->stats.roc; stats->rx_crc_errors = adapter->stats.crcerrs; stats->rx_frame_errors = adapter->stats.algnerrc; stats->rx_missed_errors = adapter->stats.mpc; /* Tx Errors */ - stats->tx_errors = adapter->stats.ecol + - adapter->stats.latecol; + stats->tx_errors = adapter->stats.ecol + adapter->stats.latecol; stats->tx_aborted_errors = adapter->stats.ecol; stats->tx_window_errors = adapter->stats.latecol; stats->tx_carrier_errors = adapter->stats.tncrs; @@ -5162,7 +5759,7 @@ struct rtnl_link_stats64 *e1000e_get_stats64(struct net_device *netdev, static int e1000_change_mtu(struct net_device *netdev, int new_mtu) { struct e1000_adapter *adapter = netdev_priv(netdev); - int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; + int max_frame = new_mtu + VLAN_HLEN + ETH_HLEN + ETH_FCS_LEN; /* Jumbo frame support */ if ((max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) && @@ -5178,33 +5775,27 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) return -EINVAL; } - /* Jumbo frame workaround on 82579 requires CRC be stripped */ - if ((adapter->hw.mac.type == e1000_pch2lan) && + /* Jumbo frame workaround on 82579 and newer requires CRC be stripped */ + if ((adapter->hw.mac.type >= e1000_pch2lan) && !(adapter->flags2 & FLAG2_CRC_STRIPPING) && (new_mtu > ETH_DATA_LEN)) { - e_err("Jumbo Frames not supported on 82579 when CRC stripping is disabled.\n"); + e_err("Jumbo Frames not supported on this device when CRC stripping is disabled.\n"); return -EINVAL; } - /* 82573 Errata 17 */ - if (((adapter->hw.mac.type == e1000_82573) || - (adapter->hw.mac.type == e1000_82574)) && - (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN)) { - adapter->flags2 |= FLAG2_DISABLE_ASPM_L1; - e1000e_disable_aspm(adapter->pdev, PCIE_LINK_STATE_L1); - } - while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) usleep_range(1000, 2000); /* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */ adapter->max_frame_size = max_frame; e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu); netdev->mtu = new_mtu; + + pm_runtime_get_sync(netdev->dev.parent); + if (netif_running(netdev)) - e1000e_down(adapter); + e1000e_down(adapter, true); - /* - * NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN + /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN * means we reserve 2 more, this pushes us to allocate from the next * larger slab size. * i.e. RXBUFFER_2048 --> size-4096 slab @@ -5219,15 +5810,17 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) /* adjust allocation if LPE protects us, and we aren't using SBP */ if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) || - (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN)) + (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN)) adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN - + ETH_FCS_LEN; + + ETH_FCS_LEN; if (netif_running(netdev)) e1000e_up(adapter); else e1000e_reset(adapter); + pm_runtime_put_sync(netdev->dev.parent); + clear_bit(__E1000_RESETTING, &adapter->state); return 0; @@ -5291,6 +5884,65 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, return 0; } +/** + * e1000e_hwtstamp_ioctl - control hardware time stamping + * @netdev: network interface device structure + * @ifreq: interface request + * + * Outgoing time stamping can be enabled and disabled. Play nice and + * disable it when requested, although it shouldn't cause any overhead + * when no packet needs it. At most one packet in the queue may be + * marked for time stamping, otherwise it would be impossible to tell + * for sure to which packet the hardware time stamp belongs. + * + * Incoming time stamping has to be configured via the hardware filters. + * Not all combinations are supported, in particular event type has to be + * specified. Matching the kind of event packet is not supported, with the + * exception of "all V2 events regardless of level 2 or 4". + **/ +static int e1000e_hwtstamp_set(struct net_device *netdev, struct ifreq *ifr) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct hwtstamp_config config; + int ret_val; + + if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) + return -EFAULT; + + ret_val = e1000e_config_hwtstamp(adapter, &config); + if (ret_val) + return ret_val; + + switch (config.rx_filter) { + case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: + case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: + case HWTSTAMP_FILTER_PTP_V2_SYNC: + case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: + case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: + case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: + /* With V2 type filters which specify a Sync or Delay Request, + * Path Delay Request/Response messages are also time stamped + * by hardware so notify the caller the requested packets plus + * some others are time stamped. + */ + config.rx_filter = HWTSTAMP_FILTER_SOME; + break; + default: + break; + } + + return copy_to_user(ifr->ifr_data, &config, + sizeof(config)) ? -EFAULT : 0; +} + +static int e1000e_hwtstamp_get(struct net_device *netdev, struct ifreq *ifr) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + + return copy_to_user(ifr->ifr_data, &adapter->hwtstamp_config, + sizeof(adapter->hwtstamp_config)) ? -EFAULT : 0; +} + static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) { switch (cmd) { @@ -5298,6 +5950,10 @@ static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) case SIOCGMIIREG: case SIOCSMIIREG: return e1000_mii_ioctl(netdev, ifr, cmd); + case SIOCSHWTSTAMP: + return e1000e_hwtstamp_set(netdev, ifr); + case SIOCGHWTSTAMP: + return e1000e_hwtstamp_get(netdev, ifr); default: return -EOPNOTSUPP; } @@ -5306,9 +5962,9 @@ static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc) { struct e1000_hw *hw = &adapter->hw; - u32 i, mac_reg; + u32 i, mac_reg, wuc; u16 phy_reg, wuc_enable; - int retval = 0; + int retval; /* copy MAC RARs to PHY RARs */ e1000_copy_rx_addrs_to_phy_ich8lan(hw); @@ -5322,7 +5978,7 @@ static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc) /* Enable access to wakeup registers on and set page to BM_WUC_PAGE */ retval = e1000_enable_phy_wakeup_reg_access_bm(hw, &wuc_enable); if (retval) - goto out; + goto release; /* copy MAC MTA to PHY MTA - only needed for pchlan */ for (i = 0; i < adapter->hw.mac.mta_reg_count; i++) { @@ -5343,7 +5999,7 @@ static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc) phy_reg &= ~(BM_RCTL_MO_MASK); if (mac_reg & E1000_RCTL_MO_3) phy_reg |= (((mac_reg & E1000_RCTL_MO_3) >> E1000_RCTL_MO_SHIFT) - << BM_RCTL_MO_SHIFT); + << BM_RCTL_MO_SHIFT); if (mac_reg & E1000_RCTL_BAM) phy_reg |= BM_RCTL_BAM; if (mac_reg & E1000_RCTL_PMCF) @@ -5353,48 +6009,66 @@ static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc) phy_reg |= BM_RCTL_RFCE; hw->phy.ops.write_reg_page(&adapter->hw, BM_RCTL, phy_reg); + wuc = E1000_WUC_PME_EN; + if (wufc & (E1000_WUFC_MAG | E1000_WUFC_LNKC)) + wuc |= E1000_WUC_APME; + /* enable PHY wakeup in MAC register */ ew32(WUFC, wufc); - ew32(WUC, E1000_WUC_PHY_WAKE | E1000_WUC_PME_EN); + ew32(WUC, (E1000_WUC_PHY_WAKE | E1000_WUC_APMPME | + E1000_WUC_PME_STATUS | wuc)); /* configure and enable PHY wakeup in PHY registers */ hw->phy.ops.write_reg_page(&adapter->hw, BM_WUFC, wufc); - hw->phy.ops.write_reg_page(&adapter->hw, BM_WUC, E1000_WUC_PME_EN); + hw->phy.ops.write_reg_page(&adapter->hw, BM_WUC, wuc); /* activate PHY wakeup */ wuc_enable |= BM_WUC_ENABLE_BIT | BM_WUC_HOST_WU_BIT; retval = e1000_disable_phy_wakeup_reg_access_bm(hw, &wuc_enable); if (retval) e_err("Could not set PHY Host Wakeup bit\n"); -out: +release: hw->phy.ops.release(hw); return retval; } -static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake, - bool runtime) +static int e1000e_pm_freeze(struct device *dev) { - struct net_device *netdev = pci_get_drvdata(pdev); + struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev)); struct e1000_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - u32 ctrl, ctrl_ext, rctl, status; - /* Runtime suspend should only enable wakeup for link changes */ - u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol; - int retval = 0; netif_device_detach(netdev); if (netif_running(netdev)) { + int count = E1000_CHECK_RESET_COUNT; + + while (test_bit(__E1000_RESETTING, &adapter->state) && count--) + usleep_range(10000, 20000); + WARN_ON(test_bit(__E1000_RESETTING, &adapter->state)); - e1000e_down(adapter); + + /* Quiesce the device without resetting the hardware */ + e1000e_down(adapter, false); e1000_free_irq(adapter); } e1000e_reset_interrupt_capability(adapter); - retval = pci_save_state(pdev); - if (retval) - return retval; + /* Allow time for pending master requests to run */ + e1000e_disable_pcie_master(&adapter->hw); + + return 0; +} + +static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 ctrl, ctrl_ext, rctl, status; + /* Runtime suspend should only enable wakeup for link changes */ + u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol; + int retval = 0; status = er32(STATUS); if (status & E1000_STATUS_LU) @@ -5412,10 +6086,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake, } ctrl = er32(CTRL); - /* advertise wake from D3Cold */ - #define E1000_CTRL_ADVD3WUC 0x00100000 - /* phy power management enable */ - #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000 ctrl |= E1000_CTRL_ADVD3WUC; if (!(adapter->flags2 & FLAG2_HAS_PHY_WAKEUP)) ctrl |= E1000_CTRL_EN_PHY_PWR_MGMT; @@ -5430,12 +6100,12 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake, ew32(CTRL_EXT, ctrl_ext); } + if (!runtime) + e1000e_power_up_phy(adapter); + if (adapter->flags & FLAG_IS_ICH) e1000_suspend_workarounds_ich8lan(&adapter->hw); - /* Allow time for pending master requests to run */ - e1000e_disable_pcie_master(&adapter->hw); - if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) { /* enable wakeup by the PHY */ retval = e1000_init_phy_wakeup(adapter, wufc); @@ -5449,120 +6119,136 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake, } else { ew32(WUC, 0); ew32(WUFC, 0); + + e1000_power_down_phy(adapter); } - *enable_wake = !!wufc; + if (adapter->hw.phy.type == e1000_phy_igp_3) { + e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw); + } else if (hw->mac.type == e1000_pch_lpt) { + if (!(wufc & (E1000_WUFC_EX | E1000_WUFC_MC | E1000_WUFC_BC))) + /* ULP does not support wake from unicast, multicast + * or broadcast. + */ + retval = e1000_enable_ulp_lpt_lp(hw, !runtime); - /* make sure adapter isn't asleep if manageability is enabled */ - if ((adapter->flags & FLAG_MNG_PT_ENABLED) || - (hw->mac.ops.check_mng_mode(hw))) - *enable_wake = true; + if (retval) + return retval; + } - if (adapter->hw.phy.type == e1000_phy_igp_3) - e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw); - /* - * Release control of h/w to f/w. If f/w is AMT enabled, this + /* Release control of h/w to f/w. If f/w is AMT enabled, this * would have already happened in close and is redundant. */ e1000e_release_hw_control(adapter); - pci_disable_device(pdev); - - return 0; -} - -static void e1000_power_off(struct pci_dev *pdev, bool sleep, bool wake) -{ - if (sleep && wake) { - pci_prepare_to_sleep(pdev); - return; - } - - pci_wake_from_d3(pdev, wake); - pci_set_power_state(pdev, PCI_D3hot); -} - -static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep, - bool wake) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct e1000_adapter *adapter = netdev_priv(netdev); + pci_clear_master(pdev); - /* - * The pci-e switch on some quad port adapters will report a + /* The pci-e switch on some quad port adapters will report a * correctable error when the MAC transitions from D0 to D3. To * prevent this we need to mask off the correctable errors on the * downstream port of the pci-e switch. + * + * We don't have the associated upstream bridge while assigning + * the PCI device into guest. For example, the KVM on power is + * one of the cases. */ if (adapter->flags & FLAG_IS_QUAD_PORT) { struct pci_dev *us_dev = pdev->bus->self; - int pos = pci_pcie_cap(us_dev); u16 devctl; - pci_read_config_word(us_dev, pos + PCI_EXP_DEVCTL, &devctl); - pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL, - (devctl & ~PCI_EXP_DEVCTL_CERE)); + if (!us_dev) + return 0; - e1000_power_off(pdev, sleep, wake); + pcie_capability_read_word(us_dev, PCI_EXP_DEVCTL, &devctl); + pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL, + (devctl & ~PCI_EXP_DEVCTL_CERE)); - pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL, devctl); - } else { - e1000_power_off(pdev, sleep, wake); + pci_save_state(pdev); + pci_prepare_to_sleep(pdev); + + pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL, devctl); } + + return 0; } -#ifdef CONFIG_PCIEASPM -static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state) +/** + * e1000e_disable_aspm - Disable ASPM states + * @pdev: pointer to PCI device struct + * @state: bit-mask of ASPM states to disable + * + * Some devices *must* have certain ASPM states disabled per hardware errata. + **/ +static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state) { + struct pci_dev *parent = pdev->bus->self; + u16 aspm_dis_mask = 0; + u16 pdev_aspmc, parent_aspmc; + + switch (state) { + case PCIE_LINK_STATE_L0S: + case PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1: + aspm_dis_mask |= PCI_EXP_LNKCTL_ASPM_L0S; + /* fall-through - can't have L1 without L0s */ + case PCIE_LINK_STATE_L1: + aspm_dis_mask |= PCI_EXP_LNKCTL_ASPM_L1; + break; + default: + return; + } + + pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &pdev_aspmc); + pdev_aspmc &= PCI_EXP_LNKCTL_ASPMC; + + if (parent) { + pcie_capability_read_word(parent, PCI_EXP_LNKCTL, + &parent_aspmc); + parent_aspmc &= PCI_EXP_LNKCTL_ASPMC; + } + + /* Nothing to do if the ASPM states to be disabled already are */ + if (!(pdev_aspmc & aspm_dis_mask) && + (!parent || !(parent_aspmc & aspm_dis_mask))) + return; + + dev_info(&pdev->dev, "Disabling ASPM %s %s\n", + (aspm_dis_mask & pdev_aspmc & PCI_EXP_LNKCTL_ASPM_L0S) ? + "L0s" : "", + (aspm_dis_mask & pdev_aspmc & PCI_EXP_LNKCTL_ASPM_L1) ? + "L1" : ""); + +#ifdef CONFIG_PCIEASPM pci_disable_link_state_locked(pdev, state); -} -#else -static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state) -{ - int pos; - u16 reg16; - /* - * Both device and parent should have the same ASPM setting. - * Disable ASPM in downstream component first and then upstream. + /* Double-check ASPM control. If not disabled by the above, the + * BIOS is preventing that from happening (or CONFIG_PCIEASPM is + * not enabled); override by writing PCI config space directly. */ - pos = pci_pcie_cap(pdev); - pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16); - reg16 &= ~state; - pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16); + pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &pdev_aspmc); + pdev_aspmc &= PCI_EXP_LNKCTL_ASPMC; - if (!pdev->bus->self) + if (!(aspm_dis_mask & pdev_aspmc)) return; - - pos = pci_pcie_cap(pdev->bus->self); - pci_read_config_word(pdev->bus->self, pos + PCI_EXP_LNKCTL, ®16); - reg16 &= ~state; - pci_write_config_word(pdev->bus->self, pos + PCI_EXP_LNKCTL, reg16); -} #endif -static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state) -{ - dev_info(&pdev->dev, "Disabling ASPM %s %s\n", - (state & PCIE_LINK_STATE_L0S) ? "L0s" : "", - (state & PCIE_LINK_STATE_L1) ? "L1" : ""); - __e1000e_disable_aspm(pdev, state); -} + /* Both device and parent should have the same ASPM setting. + * Disable ASPM in downstream component first and then upstream. + */ + pcie_capability_clear_word(pdev, PCI_EXP_LNKCTL, aspm_dis_mask); -#ifdef CONFIG_PM -static bool e1000e_pm_ready(struct e1000_adapter *adapter) -{ - return !!adapter->tx_ring->buffer_info; + if (parent) + pcie_capability_clear_word(parent, PCI_EXP_LNKCTL, + aspm_dis_mask); } +#ifdef CONFIG_PM static int __e1000_resume(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; u16 aspm_disable_flag = 0; - u32 err; if (adapter->flags2 & FLAG2_DISABLE_ASPM_L0S) aspm_disable_flag = PCIE_LINK_STATE_L0S; @@ -5571,18 +6257,9 @@ static int __e1000_resume(struct pci_dev *pdev) if (aspm_disable_flag) e1000e_disable_aspm(pdev, aspm_disable_flag); - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - pci_save_state(pdev); - - e1000e_set_interrupt_capability(adapter); - if (netif_running(netdev)) { - err = e1000_request_irq(adapter); - if (err) - return err; - } + pci_set_master(pdev); - if (hw->mac.type == e1000_pch2lan) + if (hw->mac.type >= e1000_pch2lan) e1000_resume_workarounds_pchlan(&adapter->hw); e1000e_power_up_phy(adapter); @@ -5594,24 +6271,25 @@ static int __e1000_resume(struct pci_dev *pdev) e1e_rphy(&adapter->hw, BM_WUS, &phy_data); if (phy_data) { e_info("PHY Wakeup cause - %s\n", - phy_data & E1000_WUS_EX ? "Unicast Packet" : - phy_data & E1000_WUS_MC ? "Multicast Packet" : - phy_data & E1000_WUS_BC ? "Broadcast Packet" : - phy_data & E1000_WUS_MAG ? "Magic Packet" : - phy_data & E1000_WUS_LNKC ? - "Link Status Change" : "other"); + phy_data & E1000_WUS_EX ? "Unicast Packet" : + phy_data & E1000_WUS_MC ? "Multicast Packet" : + phy_data & E1000_WUS_BC ? "Broadcast Packet" : + phy_data & E1000_WUS_MAG ? "Magic Packet" : + phy_data & E1000_WUS_LNKC ? + "Link Status Change" : "other"); } e1e_wphy(&adapter->hw, BM_WUS, ~0); } else { u32 wus = er32(WUS); + if (wus) { e_info("MAC Wakeup cause - %s\n", - wus & E1000_WUS_EX ? "Unicast Packet" : - wus & E1000_WUS_MC ? "Multicast Packet" : - wus & E1000_WUS_BC ? "Broadcast Packet" : - wus & E1000_WUS_MAG ? "Magic Packet" : - wus & E1000_WUS_LNKC ? "Link Status Change" : - "other"); + wus & E1000_WUS_EX ? "Unicast Packet" : + wus & E1000_WUS_MC ? "Multicast Packet" : + wus & E1000_WUS_BC ? "Broadcast Packet" : + wus & E1000_WUS_MAG ? "Magic Packet" : + wus & E1000_WUS_LNKC ? "Link Status Change" : + "other"); } ew32(WUS, ~0); } @@ -5620,13 +6298,7 @@ static int __e1000_resume(struct pci_dev *pdev) e1000_init_manageability_pt(adapter); - if (netif_running(netdev)) - e1000e_up(adapter); - - netif_device_attach(netdev); - - /* - * If the controller has AMT, do not set DRV_LOAD until the interface + /* If the controller has AMT, do not set DRV_LOAD until the interface * is up. For all other cases, let the f/w know that the h/w is now * under the control of the driver. */ @@ -5637,94 +6309,116 @@ static int __e1000_resume(struct pci_dev *pdev) } #ifdef CONFIG_PM_SLEEP -static int e1000_suspend(struct device *dev) +static int e1000e_pm_thaw(struct device *dev) +{ + struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev)); + struct e1000_adapter *adapter = netdev_priv(netdev); + + e1000e_set_interrupt_capability(adapter); + if (netif_running(netdev)) { + u32 err = e1000_request_irq(adapter); + + if (err) + return err; + + e1000e_up(adapter); + } + + netif_device_attach(netdev); + + return 0; +} + +static int e1000e_pm_suspend(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); - int retval; - bool wake; - retval = __e1000_shutdown(pdev, &wake, false); - if (!retval) - e1000_complete_shutdown(pdev, true, wake); + e1000e_pm_freeze(dev); - return retval; + return __e1000_shutdown(pdev, false); } -static int e1000_resume(struct device *dev) +static int e1000e_pm_resume(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); - struct net_device *netdev = pci_get_drvdata(pdev); - struct e1000_adapter *adapter = netdev_priv(netdev); + int rc; - if (e1000e_pm_ready(adapter)) - adapter->idle_check = true; + rc = __e1000_resume(pdev); + if (rc) + return rc; - return __e1000_resume(pdev); + return e1000e_pm_thaw(dev); } #endif /* CONFIG_PM_SLEEP */ #ifdef CONFIG_PM_RUNTIME -static int e1000_runtime_suspend(struct device *dev) +static int e1000e_pm_runtime_idle(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); - if (e1000e_pm_ready(adapter)) { - bool wake; + if (!e1000e_has_link(adapter)) + pm_schedule_suspend(dev, 5 * MSEC_PER_SEC); - __e1000_shutdown(pdev, &wake, true); - } - - return 0; + return -EBUSY; } -static int e1000_idle(struct device *dev) +static int e1000e_pm_runtime_resume(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); + int rc; - if (!e1000e_pm_ready(adapter)) - return 0; + rc = __e1000_resume(pdev); + if (rc) + return rc; - if (adapter->idle_check) { - adapter->idle_check = false; - if (!e1000e_has_link(adapter)) - pm_schedule_suspend(dev, MSEC_PER_SEC); - } + if (netdev->flags & IFF_UP) + rc = e1000e_up(adapter); - return -EBUSY; + return rc; } -static int e1000_runtime_resume(struct device *dev) +static int e1000e_pm_runtime_suspend(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); - if (!e1000e_pm_ready(adapter)) - return 0; + if (netdev->flags & IFF_UP) { + int count = E1000_CHECK_RESET_COUNT; + + while (test_bit(__E1000_RESETTING, &adapter->state) && count--) + usleep_range(10000, 20000); + + WARN_ON(test_bit(__E1000_RESETTING, &adapter->state)); - adapter->idle_check = !dev->power.runtime_auto; - return __e1000_resume(pdev); + /* Down the device without resetting the hardware */ + e1000e_down(adapter, false); + } + + if (__e1000_shutdown(pdev, true)) { + e1000e_pm_runtime_resume(dev); + return -EBUSY; + } + + return 0; } #endif /* CONFIG_PM_RUNTIME */ #endif /* CONFIG_PM */ static void e1000_shutdown(struct pci_dev *pdev) { - bool wake = false; + e1000e_pm_freeze(&pdev->dev); - __e1000_shutdown(pdev, &wake, false); - - if (system_state == SYSTEM_POWER_OFF) - e1000_complete_shutdown(pdev, false, wake); + __e1000_shutdown(pdev, false); } #ifdef CONFIG_NET_POLL_CONTROLLER -static irqreturn_t e1000_intr_msix(int irq, void *data) +static irqreturn_t e1000_intr_msix(int __always_unused irq, void *data) { struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); @@ -5754,7 +6448,10 @@ static irqreturn_t e1000_intr_msix(int irq, void *data) return IRQ_HANDLED; } -/* +/** + * e1000_netpoll + * @netdev: network interface device structure + * * Polling 'interrupt' - used by things like netconsole to send skbs * without having to re-enable interrupts. It's not called while * the interrupt routine is executing. @@ -5772,7 +6469,7 @@ static void e1000_netpoll(struct net_device *netdev) e1000_intr_msi(adapter->pdev->irq, netdev); enable_irq(adapter->pdev->irq); break; - default: /* E1000E_INT_MODE_LEGACY */ + default: /* E1000E_INT_MODE_LEGACY */ disable_irq(adapter->pdev->irq); e1000_intr(adapter->pdev->irq, netdev); enable_irq(adapter->pdev->irq); @@ -5801,7 +6498,7 @@ static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev, return PCI_ERS_RESULT_DISCONNECT; if (netif_running(netdev)) - e1000e_down(adapter); + e1000e_down(adapter, true); pci_disable_device(pdev); /* Request a slot slot reset. */ @@ -5813,7 +6510,7 @@ static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev, * @pdev: Pointer to PCI device * * Restart the card from scratch, as if from a cold-boot. Implementation - * resembles the first-half of the e1000_resume routine. + * resembles the first-half of the e1000e_pm_resume routine. */ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev) { @@ -5837,9 +6534,9 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev) "Cannot re-enable PCI device after reset.\n"); result = PCI_ERS_RESULT_DISCONNECT; } else { - pci_set_master(pdev); pdev->state_saved = true; pci_restore_state(pdev); + pci_set_master(pdev); pci_enable_wake(pdev, PCI_D3hot, 0); pci_enable_wake(pdev, PCI_D3cold, 0); @@ -5860,7 +6557,7 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev) * * This callback is called when the error recovery driver tells us that * its OK to resume normal operation. Implementation resembles the - * second-half of the e1000_resume routine. + * second-half of the e1000e_pm_resume routine. */ static void e1000_io_resume(struct pci_dev *pdev) { @@ -5879,14 +6576,12 @@ static void e1000_io_resume(struct pci_dev *pdev) netif_device_attach(netdev); - /* - * If the controller has AMT, do not set DRV_LOAD until the interface + /* If the controller has AMT, do not set DRV_LOAD until the interface * is up. For all other cases, let the f/w know that the h/w is now * under the control of the driver. */ if (!(adapter->flags & FLAG_HAS_AMT)) e1000e_get_hw_control(adapter); - } static void e1000_print_device_info(struct e1000_adapter *adapter) @@ -5900,7 +6595,7 @@ static void e1000_print_device_info(struct e1000_adapter *adapter) e_info("(PCI Express:2.5GT/s:%s) %pM\n", /* bus width */ ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" : - "Width x1"), + "Width x1"), /* MAC address */ netdev->dev_addr); e_info("Intel(R) PRO/%s Network Connection\n", @@ -5908,7 +6603,7 @@ static void e1000_print_device_info(struct e1000_adapter *adapter) ret_val = e1000_read_pba_string_generic(hw, pba_str, E1000_PBANUM_LENGTH); if (ret_val) - strncpy((char *)pba_str, "Unknown", sizeof(pba_str) - 1); + strlcpy((char *)pba_str, "Unknown", sizeof(pba_str)); e_info("MAC: %d, PHY: %d, PBA No: %s\n", hw->mac.type, hw->phy.type, pba_str); } @@ -5923,7 +6618,8 @@ static void e1000_eeprom_checks(struct e1000_adapter *adapter) return; ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &buf); - if (!ret_val && (!(le16_to_cpu(buf) & (1 << 0)))) { + le16_to_cpus(&buf); + if (!ret_val && (!(buf & (1 << 0)))) { /* Deep Smart Power Down (DSPD) */ dev_warn(&adapter->pdev->dev, "Warning: detected DSPD enabled in EEPROM\n"); @@ -5931,7 +6627,7 @@ static void e1000_eeprom_checks(struct e1000_adapter *adapter) } static int e1000_set_features(struct net_device *netdev, - netdev_features_t features) + netdev_features_t features) { struct e1000_adapter *adapter = netdev_priv(netdev); netdev_features_t changed = features ^ netdev->features; @@ -5939,10 +6635,27 @@ static int e1000_set_features(struct net_device *netdev, if (changed & (NETIF_F_TSO | NETIF_F_TSO6)) adapter->flags |= FLAG_TSO_FORCE; - if (!(changed & (NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX | - NETIF_F_RXCSUM))) + if (!(changed & (NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_TX | + NETIF_F_RXCSUM | NETIF_F_RXHASH | NETIF_F_RXFCS | + NETIF_F_RXALL))) return 0; + if (changed & NETIF_F_RXFCS) { + if (features & NETIF_F_RXFCS) { + adapter->flags2 &= ~FLAG2_CRC_STRIPPING; + } else { + /* We need to take it back to defaults, which might mean + * stripping is still disabled at the adapter level. + */ + if (adapter->flags2 & FLAG2_DFLT_CRC_STRIPPING) + adapter->flags2 |= FLAG2_CRC_STRIPPING; + else + adapter->flags2 &= ~FLAG2_CRC_STRIPPING; + } + } + + netdev->features = features; + if (netif_running(netdev)) e1000e_reinit_locked(adapter); else @@ -5982,8 +6695,7 @@ static const struct net_device_ops e1000e_netdev_ops = { * The OS initialization, configuring of the adapter private structure, * and a hardware reset occur. **/ -static int __devinit e1000_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) +static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { struct net_device *netdev; struct e1000_adapter *adapter; @@ -5991,10 +6703,9 @@ static int __devinit e1000_probe(struct pci_dev *pdev, const struct e1000_info *ei = e1000_info_tbl[ent->driver_data]; resource_size_t mmio_start, mmio_len; resource_size_t flash_start, flash_len; - static int cards_found; u16 aspm_disable_flag = 0; - int i, err, pci_using_dac; + int bars, i, err, pci_using_dac; u16 eeprom_data = 0; u16 eeprom_apme_mask = E1000_EEPROM_APME; @@ -6010,26 +6721,21 @@ static int __devinit e1000_probe(struct pci_dev *pdev, return err; pci_using_dac = 0; - err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); + err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); if (!err) { - err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); - if (!err) - pci_using_dac = 1; + pci_using_dac = 1; } else { - err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); if (err) { - err = dma_set_coherent_mask(&pdev->dev, - DMA_BIT_MASK(32)); - if (err) { - dev_err(&pdev->dev, "No usable DMA configuration, aborting\n"); - goto err_dma; - } + dev_err(&pdev->dev, + "No usable DMA configuration, aborting\n"); + goto err_dma; } } - err = pci_request_selected_regions_exclusive(pdev, - pci_select_bars(pdev, IORESOURCE_MEM), - e1000e_driver_name); + bars = pci_select_bars(pdev, IORESOURCE_MEM); + err = pci_request_selected_regions_exclusive(pdev, bars, + e1000e_driver_name); if (err) goto err_pci_reg; @@ -6063,7 +6769,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, adapter->hw.adapter = adapter; adapter->hw.mac.type = ei->mac; adapter->max_hw_frame_size = ei->max_hw_frame_size; - adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1; + adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE); mmio_start = pci_resource_start(pdev, 0); mmio_len = pci_resource_len(pdev, 0); @@ -6082,12 +6788,16 @@ static int __devinit e1000_probe(struct pci_dev *pdev, goto err_flashmap; } + /* Set default EEE advertisement */ + if (adapter->flags2 & FLAG2_HAS_EEE) + adapter->eee_advert = MDIO_EEE_100TX | MDIO_EEE_1000T; + /* construct the net_device struct */ - netdev->netdev_ops = &e1000e_netdev_ops; + netdev->netdev_ops = &e1000e_netdev_ops; e1000e_set_ethtool_ops(netdev); - netdev->watchdog_timeo = 5 * HZ; - netif_napi_add(netdev, &adapter->napi, e1000_clean, 64); - strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); + netdev->watchdog_timeo = 5 * HZ; + netif_napi_add(netdev, &adapter->napi, e1000e_poll, 64); + strlcpy(netdev->name, pci_name(pdev), sizeof(netdev->name)); netdev->mem_start = mmio_start; netdev->mem_end = mmio_start + mmio_len; @@ -6124,23 +6834,28 @@ static int __devinit e1000_probe(struct pci_dev *pdev, adapter->hw.phy.ms_type = e1000_ms_hw_default; } - if (e1000_check_reset_block(&adapter->hw)) - e_info("PHY reset is blocked due to SOL/IDER session.\n"); + if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw)) + dev_info(&pdev->dev, + "PHY reset is blocked due to SOL/IDER session.\n"); /* Set initial default active device features */ netdev->features = (NETIF_F_SG | - NETIF_F_HW_VLAN_RX | - NETIF_F_HW_VLAN_TX | + NETIF_F_HW_VLAN_CTAG_RX | + NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_TSO | NETIF_F_TSO6 | + NETIF_F_RXHASH | NETIF_F_RXCSUM | NETIF_F_HW_CSUM); /* Set user-changeable features (subset of all device features) */ netdev->hw_features = netdev->features; + netdev->hw_features |= NETIF_F_RXFCS; + netdev->priv_flags |= IFF_SUPP_NOFCS; + netdev->hw_features |= NETIF_F_RXALL; if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) - netdev->features |= NETIF_F_HW_VLAN_FILTER; + netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER; netdev->vlan_features |= (NETIF_F_SG | NETIF_F_TSO | @@ -6157,21 +6872,19 @@ static int __devinit e1000_probe(struct pci_dev *pdev, if (e1000e_enable_mng_pass_thru(&adapter->hw)) adapter->flags |= FLAG_MNG_PT_ENABLED; - /* - * before reading the NVM, reset the controller to + /* before reading the NVM, reset the controller to * put the device in a known good starting state */ adapter->hw.mac.ops.reset_hw(&adapter->hw); - /* - * systems with ASPM and others may see the checksum fail on the first + /* systems with ASPM and others may see the checksum fail on the first * attempt. Let's give it a few tries */ for (i = 0;; i++) { if (e1000_validate_nvm_checksum(&adapter->hw) >= 0) break; if (i == 2) { - e_err("The NVM Checksum Is Not Valid\n"); + dev_err(&pdev->dev, "The NVM Checksum Is Not Valid\n"); err = -EIO; goto err_eeprom; } @@ -6181,24 +6894,25 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* copy the MAC address */ if (e1000e_read_mac_addr(&adapter->hw)) - e_err("NVM Read Error while reading MAC address\n"); + dev_err(&pdev->dev, + "NVM Read Error while reading MAC address\n"); memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len); - memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len); - if (!is_valid_ether_addr(netdev->perm_addr)) { - e_err("Invalid MAC Address: %pM\n", netdev->perm_addr); + if (!is_valid_ether_addr(netdev->dev_addr)) { + dev_err(&pdev->dev, "Invalid MAC Address: %pM\n", + netdev->dev_addr); err = -EIO; goto err_eeprom; } init_timer(&adapter->watchdog_timer); adapter->watchdog_timer.function = e1000_watchdog; - adapter->watchdog_timer.data = (unsigned long) adapter; + adapter->watchdog_timer.data = (unsigned long)adapter; init_timer(&adapter->phy_info_timer); adapter->phy_info_timer.function = e1000_update_phy_info; - adapter->phy_info_timer.data = (unsigned long) adapter; + adapter->phy_info_timer.data = (unsigned long)adapter; INIT_WORK(&adapter->reset_task, e1000_reset_task); INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task); @@ -6213,12 +6927,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, adapter->hw.fc.current_mode = e1000_fc_default; adapter->hw.phy.autoneg_advertised = 0x2f; - /* ring size defaults */ - adapter->rx_ring->count = 256; - adapter->tx_ring->count = 256; - - /* - * Initial Wake on LAN setting - If APM wake is enabled in + /* Initial Wake on LAN setting - If APM wake is enabled in * the EEPROM, enable the ACPI Magic Packet filter */ if (adapter->flags & FLAG_APME_IN_WUC) { @@ -6231,19 +6940,18 @@ static int __devinit e1000_probe(struct pci_dev *pdev, } else if (adapter->flags & FLAG_APME_IN_CTRL3) { if (adapter->flags & FLAG_APME_CHECK_PORT_B && (adapter->hw.bus.func == 1)) - e1000_read_nvm(&adapter->hw, - NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data); + e1000_read_nvm(&adapter->hw, NVM_INIT_CONTROL3_PORT_B, + 1, &eeprom_data); else - e1000_read_nvm(&adapter->hw, - NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data); + e1000_read_nvm(&adapter->hw, NVM_INIT_CONTROL3_PORT_A, + 1, &eeprom_data); } /* fetch WoL from EEPROM */ if (eeprom_data & eeprom_apme_mask) adapter->eeprom_wol |= E1000_WUFC_MAG; - /* - * now that we have the eeprom settings, apply the special cases + /* now that we have the eeprom settings, apply the special cases * where the eeprom may be wrong or the board simply won't support * wake on lan on a particular port */ @@ -6252,7 +6960,11 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* initialize the wol settings based on the eeprom settings */ adapter->wol = adapter->eeprom_wol; - device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + + /* make sure adapter isn't asleep if manageability is enabled */ + if (adapter->wol || (adapter->flags & FLAG_MNG_PT_ENABLED) || + (hw->mac.ops.check_mng_mode(hw))) + device_wakeup_enable(&pdev->dev); /* save off EEPROM version number */ e1000_read_nvm(&adapter->hw, 5, 1, &adapter->eeprom_vers); @@ -6260,15 +6972,14 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* reset the hardware with the new settings */ e1000e_reset(adapter); - /* - * If the controller has AMT, do not set DRV_LOAD until the interface + /* If the controller has AMT, do not set DRV_LOAD until the interface * is up. For all other cases, let the f/w know that the h/w is now * under the control of the driver. */ if (!(adapter->flags & FLAG_HAS_AMT)) e1000e_get_hw_control(adapter); - strncpy(netdev->name, "eth%d", sizeof(netdev->name) - 1); + strlcpy(netdev->name, "eth%d", sizeof(netdev->name)); err = register_netdev(netdev); if (err) goto err_register; @@ -6276,6 +6987,9 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* carrier off reporting is important to ethtool even BEFORE open */ netif_carrier_off(netdev); + /* init PTP hardware clock */ + e1000e_ptp_init(adapter); + e1000_print_device_info(adapter); if (pci_dev_run_wake(pdev)) @@ -6287,7 +7001,7 @@ err_register: if (!(adapter->flags & FLAG_HAS_AMT)) e1000e_release_hw_control(adapter); err_eeprom: - if (!e1000_check_reset_block(&adapter->hw)) + if (hw->phy.ops.check_reset_block && !hw->phy.ops.check_reset_block(hw)) e1000_phy_hw_reset(&adapter->hw); err_hw_init: kfree(adapter->tx_ring); @@ -6302,7 +7016,7 @@ err_ioremap: free_netdev(netdev); err_alloc_etherdev: pci_release_selected_regions(pdev, - pci_select_bars(pdev, IORESOURCE_MEM)); + pci_select_bars(pdev, IORESOURCE_MEM)); err_pci_reg: err_dma: pci_disable_device(pdev); @@ -6318,14 +7032,15 @@ err_dma: * Hot-Plug event, or because the driver is going to be removed from * memory. **/ -static void __devexit e1000_remove(struct pci_dev *pdev) +static void e1000_remove(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); bool down = test_bit(__E1000_DOWN, &adapter->state); - /* - * The timers may be rescheduled, so explicitly disable them + e1000e_ptp_remove(adapter); + + /* The timers may be rescheduled, so explicitly disable them * from being rescheduled. */ if (!down) @@ -6339,8 +7054,13 @@ static void __devexit e1000_remove(struct pci_dev *pdev) cancel_work_sync(&adapter->update_phy_task); cancel_work_sync(&adapter->print_hang_task); - if (!(netdev->flags & IFF_UP)) - e1000_power_down_phy(adapter); + if (adapter->flags & FLAG_HAS_HW_TIMESTAMP) { + cancel_work_sync(&adapter->tx_hwtstamp_work); + if (adapter->tx_hwtstamp_skb) { + dev_kfree_skb_any(adapter->tx_hwtstamp_skb); + adapter->tx_hwtstamp_skb = NULL; + } + } /* Don't lie to e1000_close() down the road. */ if (!down) @@ -6350,8 +7070,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev) if (pci_dev_run_wake(pdev)) pm_runtime_get_noresume(&pdev->dev); - /* - * Release control of h/w to f/w. If f/w is AMT enabled, this + /* Release control of h/w to f/w. If f/w is AMT enabled, this * would have already happened in close and is redundant. */ e1000e_release_hw_control(adapter); @@ -6364,7 +7083,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev) if (adapter->hw.flash_address) iounmap(adapter->hw.flash_address); pci_release_selected_regions(pdev, - pci_select_bars(pdev, IORESOURCE_MEM)); + pci_select_bars(pdev, IORESOURCE_MEM)); free_netdev(netdev); @@ -6375,17 +7094,18 @@ static void __devexit e1000_remove(struct pci_dev *pdev) } /* PCI Error Recovery (ERS) */ -static struct pci_error_handlers e1000_err_handler = { +static const struct pci_error_handlers e1000_err_handler = { .error_detected = e1000_io_error_detected, .slot_reset = e1000_io_slot_reset, .resume = e1000_io_resume, }; -static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = { +static const struct pci_device_id e1000_pci_tbl[] = { { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_COPPER), board_82571 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_FIBER), board_82571 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER), board_82571 }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP), board_82571 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP), + board_82571 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_FIBER), board_82571 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES), board_82571 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_DUAL), board_82571 }, @@ -6449,27 +7169,41 @@ static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = { { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_LM), board_pch2lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_V), board_pch2lan }, - { } /* terminate list */ + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPT_I217_LM), board_pch_lpt }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPT_I217_V), board_pch_lpt }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPTLP_I218_LM), board_pch_lpt }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPTLP_I218_V), board_pch_lpt }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_LM2), board_pch_lpt }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_V2), board_pch_lpt }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_LM3), board_pch_lpt }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_V3), board_pch_lpt }, + + { 0, 0, 0, 0, 0, 0, 0 } /* terminate list */ }; MODULE_DEVICE_TABLE(pci, e1000_pci_tbl); -#ifdef CONFIG_PM static const struct dev_pm_ops e1000_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(e1000_suspend, e1000_resume) - SET_RUNTIME_PM_OPS(e1000_runtime_suspend, - e1000_runtime_resume, e1000_idle) -}; +#ifdef CONFIG_PM_SLEEP + .suspend = e1000e_pm_suspend, + .resume = e1000e_pm_resume, + .freeze = e1000e_pm_freeze, + .thaw = e1000e_pm_thaw, + .poweroff = e1000e_pm_suspend, + .restore = e1000e_pm_resume, #endif + SET_RUNTIME_PM_OPS(e1000e_pm_runtime_suspend, e1000e_pm_runtime_resume, + e1000e_pm_runtime_idle) +}; /* PCI Device API Driver */ static struct pci_driver e1000_driver = { .name = e1000e_driver_name, .id_table = e1000_pci_tbl, .probe = e1000_probe, - .remove = __devexit_p(e1000_remove), -#ifdef CONFIG_PM - .driver.pm = &e1000_pm_ops, -#endif + .remove = e1000_remove, + .driver = { + .pm = &e1000_pm_ops, + }, .shutdown = e1000_shutdown, .err_handler = &e1000_err_handler }; @@ -6483,9 +7217,10 @@ static struct pci_driver e1000_driver = { static int __init e1000_init_module(void) { int ret; + pr_info("Intel(R) PRO/1000 Network Driver - %s\n", e1000e_driver_version); - pr_info("Copyright(c) 1999 - 2011 Intel Corporation.\n"); + pr_info("Copyright(c) 1999 - 2014 Intel Corporation.\n"); ret = pci_register_driver(&e1000_driver); return ret; @@ -6504,10 +7239,9 @@ static void __exit e1000_exit_module(void) } module_exit(e1000_exit_module); - MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>"); MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); -/* e1000_main.c */ +/* netdev.c */ |