diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/ich8lan.c')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ich8lan.c | 1558 |
1 files changed, 1079 insertions, 479 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 97633654760..8894ab8ed6b 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1,30 +1,23 @@ -/******************************************************************************* - - Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - Linux NICS <linux.nics@intel.com> - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +/* Intel PRO/1000 Linux driver + * Copyright(c) 1999 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * Linux NICS <linux.nics@intel.com> + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ /* 82562G 10/100 Network Connection * 82562G-2 10/100 Network Connection @@ -53,164 +46,31 @@ * 82578DC Gigabit Network Connection * 82579LM Gigabit Network Connection * 82579V Gigabit Network Connection + * Ethernet Connection I217-LM + * Ethernet Connection I217-V + * Ethernet Connection I218-V + * Ethernet Connection I218-LM + * Ethernet Connection (2) I218-LM + * Ethernet Connection (2) I218-V + * Ethernet Connection (3) I218-LM + * Ethernet Connection (3) I218-V */ #include "e1000.h" -#define ICH_FLASH_GFPREG 0x0000 -#define ICH_FLASH_HSFSTS 0x0004 -#define ICH_FLASH_HSFCTL 0x0006 -#define ICH_FLASH_FADDR 0x0008 -#define ICH_FLASH_FDATA0 0x0010 -#define ICH_FLASH_PR0 0x0074 - -#define ICH_FLASH_READ_COMMAND_TIMEOUT 500 -#define ICH_FLASH_WRITE_COMMAND_TIMEOUT 500 -#define ICH_FLASH_ERASE_COMMAND_TIMEOUT 3000000 -#define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF -#define ICH_FLASH_CYCLE_REPEAT_COUNT 10 - -#define ICH_CYCLE_READ 0 -#define ICH_CYCLE_WRITE 2 -#define ICH_CYCLE_ERASE 3 - -#define FLASH_GFPREG_BASE_MASK 0x1FFF -#define FLASH_SECTOR_ADDR_SHIFT 12 - -#define ICH_FLASH_SEG_SIZE_256 256 -#define ICH_FLASH_SEG_SIZE_4K 4096 -#define ICH_FLASH_SEG_SIZE_8K 8192 -#define ICH_FLASH_SEG_SIZE_64K 65536 - - -#define E1000_ICH_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI Reset */ -/* FW established a valid mode */ -#define E1000_ICH_FWSM_FW_VALID 0x00008000 - -#define E1000_ICH_MNG_IAMT_MODE 0x2 - -#define ID_LED_DEFAULT_ICH8LAN ((ID_LED_DEF1_DEF2 << 12) | \ - (ID_LED_DEF1_OFF2 << 8) | \ - (ID_LED_DEF1_ON2 << 4) | \ - (ID_LED_DEF1_DEF2)) - -#define E1000_ICH_NVM_SIG_WORD 0x13 -#define E1000_ICH_NVM_SIG_MASK 0xC000 -#define E1000_ICH_NVM_VALID_SIG_MASK 0xC0 -#define E1000_ICH_NVM_SIG_VALUE 0x80 - -#define E1000_ICH8_LAN_INIT_TIMEOUT 1500 - -#define E1000_FEXTNVM_SW_CONFIG 1 -#define E1000_FEXTNVM_SW_CONFIG_ICH8M (1 << 27) /* Bit redefined for ICH8M :/ */ - -#define E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK 0x0C000000 -#define E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC 0x08000000 - -#define E1000_FEXTNVM4_BEACON_DURATION_MASK 0x7 -#define E1000_FEXTNVM4_BEACON_DURATION_8USEC 0x7 -#define E1000_FEXTNVM4_BEACON_DURATION_16USEC 0x3 - -#define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL - -#define E1000_ICH_RAR_ENTRIES 7 -#define E1000_PCH2_RAR_ENTRIES 5 /* RAR[0], SHRA[0-3] */ -#define E1000_PCH_LPT_RAR_ENTRIES 12 /* RAR[0], SHRA[0-10] */ - -#define PHY_PAGE_SHIFT 5 -#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \ - ((reg) & MAX_PHY_REG_ADDRESS)) -#define IGP3_KMRN_DIAG PHY_REG(770, 19) /* KMRN Diagnostic */ -#define IGP3_VR_CTRL PHY_REG(776, 18) /* Voltage Regulator Control */ - -#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002 -#define IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK 0x0300 -#define IGP3_VR_CTRL_MODE_SHUTDOWN 0x0200 - -#define HV_LED_CONFIG PHY_REG(768, 30) /* LED Configuration */ - -#define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in milliseconds */ - -/* SMBus Control Phy Register */ -#define CV_SMB_CTRL PHY_REG(769, 23) -#define CV_SMB_CTRL_FORCE_SMBUS 0x0001 - -/* SMBus Address Phy Register */ -#define HV_SMB_ADDR PHY_REG(768, 26) -#define HV_SMB_ADDR_MASK 0x007F -#define HV_SMB_ADDR_PEC_EN 0x0200 -#define HV_SMB_ADDR_VALID 0x0080 -#define HV_SMB_ADDR_FREQ_MASK 0x1100 -#define HV_SMB_ADDR_FREQ_LOW_SHIFT 8 -#define HV_SMB_ADDR_FREQ_HIGH_SHIFT 12 - -/* PHY Power Management Control */ -#define HV_PM_CTRL PHY_REG(770, 17) -#define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA 0x100 - -/* PHY Low Power Idle Control */ -#define I82579_LPI_CTRL PHY_REG(772, 20) -#define I82579_LPI_CTRL_ENABLE_MASK 0x6000 -#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT 0x80 - -/* EMI Registers */ -#define I82579_EMI_ADDR 0x10 -#define I82579_EMI_DATA 0x11 -#define I82579_LPI_UPDATE_TIMER 0x4805 /* in 40ns units + 40 ns base value */ -#define I82579_MSE_THRESHOLD 0x084F /* Mean Square Error Threshold */ -#define I82579_MSE_LINK_DOWN 0x2411 /* MSE count before dropping link */ -#define I217_EEE_ADVERTISEMENT 0x8001 /* IEEE MMD Register 7.60 */ -#define I217_EEE_LP_ABILITY 0x8002 /* IEEE MMD Register 7.61 */ -#define I217_EEE_100_SUPPORTED (1 << 1) /* 100BaseTx EEE supported */ - -/* Intel Rapid Start Technology Support */ -#define I217_PROXY_CTRL BM_PHY_REG(BM_WUC_PAGE, 70) -#define I217_PROXY_CTRL_AUTO_DISABLE 0x0080 -#define I217_SxCTRL PHY_REG(BM_PORT_CTRL_PAGE, 28) -#define I217_SxCTRL_ENABLE_LPI_RESET 0x1000 -#define I217_CGFREG PHY_REG(772, 29) -#define I217_CGFREG_ENABLE_MTA_RESET 0x0002 -#define I217_MEMPWR PHY_REG(772, 26) -#define I217_MEMPWR_DISABLE_SMB_RELEASE 0x0010 - -/* Strapping Option Register - RO */ -#define E1000_STRAP 0x0000C -#define E1000_STRAP_SMBUS_ADDRESS_MASK 0x00FE0000 -#define E1000_STRAP_SMBUS_ADDRESS_SHIFT 17 -#define E1000_STRAP_SMT_FREQ_MASK 0x00003000 -#define E1000_STRAP_SMT_FREQ_SHIFT 12 - -/* OEM Bits Phy Register */ -#define HV_OEM_BITS PHY_REG(768, 25) -#define HV_OEM_BITS_LPLU 0x0004 /* Low Power Link Up */ -#define HV_OEM_BITS_GBE_DIS 0x0040 /* Gigabit Disable */ -#define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */ - -#define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */ -#define E1000_NVM_K1_ENABLE 0x1 /* NVM Enable K1 bit */ - -/* KMRN Mode Control */ -#define HV_KMRN_MODE_CTRL PHY_REG(769, 16) -#define HV_KMRN_MDIO_SLOW 0x0400 - -/* KMRN FIFO Control and Status */ -#define HV_KMRN_FIFO_CTRLSTA PHY_REG(770, 16) -#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK 0x7000 -#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT 12 - /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ /* Offset 04h HSFSTS */ union ich8_hws_flash_status { struct ich8_hsfsts { - u16 flcdone :1; /* bit 0 Flash Cycle Done */ - u16 flcerr :1; /* bit 1 Flash Cycle Error */ - u16 dael :1; /* bit 2 Direct Access error Log */ - u16 berasesz :2; /* bit 4:3 Sector Erase Size */ - u16 flcinprog :1; /* bit 5 flash cycle in Progress */ - u16 reserved1 :2; /* bit 13:6 Reserved */ - u16 reserved2 :6; /* bit 13:6 Reserved */ - u16 fldesvalid :1; /* bit 14 Flash Descriptor Valid */ - u16 flockdn :1; /* bit 15 Flash Config Lock-Down */ + u16 flcdone:1; /* bit 0 Flash Cycle Done */ + u16 flcerr:1; /* bit 1 Flash Cycle Error */ + u16 dael:1; /* bit 2 Direct Access error Log */ + u16 berasesz:2; /* bit 4:3 Sector Erase Size */ + u16 flcinprog:1; /* bit 5 flash cycle in Progress */ + u16 reserved1:2; /* bit 13:6 Reserved */ + u16 reserved2:6; /* bit 13:6 Reserved */ + u16 fldesvalid:1; /* bit 14 Flash Descriptor Valid */ + u16 flockdn:1; /* bit 15 Flash Config Lock-Down */ } hsf_status; u16 regval; }; @@ -219,11 +79,11 @@ union ich8_hws_flash_status { /* Offset 06h FLCTL */ union ich8_hws_flash_ctrl { struct ich8_hsflctl { - u16 flcgo :1; /* 0 Flash Cycle Go */ - u16 flcycle :2; /* 2:1 Flash Cycle */ - u16 reserved :5; /* 7:3 Reserved */ - u16 fldbcount :2; /* 9:8 Flash Data Byte Count */ - u16 flockdn :6; /* 15:10 Reserved */ + u16 flcgo:1; /* 0 Flash Cycle Go */ + u16 flcycle:2; /* 2:1 Flash Cycle */ + u16 reserved:5; /* 7:3 Reserved */ + u16 fldbcount:2; /* 9:8 Flash Data Byte Count */ + u16 flockdn:6; /* 15:10 Reserved */ } hsf_ctrl; u16 regval; }; @@ -231,10 +91,10 @@ union ich8_hws_flash_ctrl { /* ICH Flash Region Access Permissions */ union ich8_hws_flash_regacc { struct ich8_flracc { - u32 grra :8; /* 0:7 GbE region Read Access */ - u32 grwa :8; /* 8:15 GbE region Write Access */ - u32 gmrag :8; /* 23:16 GbE Master Read Access Grant */ - u32 gmwag :8; /* 31:24 GbE Master Write Access Grant */ + u32 grra:8; /* 0:7 GbE region Read Access */ + u32 grwa:8; /* 8:15 GbE region Write Access */ + u32 gmrag:8; /* 23:16 GbE Master Read Access Grant */ + u32 gmwag:8; /* 31:24 GbE Master Write Access Grant */ } hsf_flregacc; u16 regval; }; @@ -242,17 +102,16 @@ union ich8_hws_flash_regacc { /* ICH Flash Protected Region */ union ich8_flash_protected_range { struct ich8_pr { - u32 base:13; /* 0:12 Protected Range Base */ - u32 reserved1:2; /* 13:14 Reserved */ - u32 rpe:1; /* 15 Read Protection Enable */ - u32 limit:13; /* 16:28 Protected Range Limit */ - u32 reserved2:2; /* 29:30 Reserved */ - u32 wpe:1; /* 31 Write Protection Enable */ + u32 base:13; /* 0:12 Protected Range Base */ + u32 reserved1:2; /* 13:14 Reserved */ + u32 rpe:1; /* 15 Read Protection Enable */ + u32 limit:13; /* 16:28 Protected Range Limit */ + u32 reserved2:2; /* 29:30 Reserved */ + u32 wpe:1; /* 31 Write Protection Enable */ } range; u32 regval; }; -static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw); static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw); static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw); static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank); @@ -264,9 +123,7 @@ static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw, u32 offset, u16 *data); static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, u8 size, u16 *data); -static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw); static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw); -static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw); static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw); static s32 e1000_led_on_ich8lan(struct e1000_hw *hw); static s32 e1000_led_off_ich8lan(struct e1000_hw *hw); @@ -278,14 +135,18 @@ static s32 e1000_led_off_pchlan(struct e1000_hw *hw); static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active); static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw); static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw); -static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link); +static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link); static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw); static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw); static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw); -static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index); -static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index); +static int e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index); +static int e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index); +static u32 e1000_rar_get_count_pch_lpt(struct e1000_hw *hw); static s32 e1000_k1_workaround_lv(struct e1000_hw *hw); static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate); +static s32 e1000_disable_ulp_lpt_lp(struct e1000_hw *hw, bool force); +static s32 e1000_setup_copper_link_pch_lpt(struct e1000_hw *hw); +static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state); static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg) { @@ -326,16 +187,17 @@ static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw) { u16 phy_reg = 0; u32 phy_id = 0; - s32 ret_val; + s32 ret_val = 0; u16 retry_count; + u32 mac_reg = 0; for (retry_count = 0; retry_count < 2; retry_count++) { - ret_val = e1e_rphy_locked(hw, PHY_ID1, &phy_reg); + ret_val = e1e_rphy_locked(hw, MII_PHYSID1, &phy_reg); if (ret_val || (phy_reg == 0xFFFF)) continue; phy_id = (u32)(phy_reg << 16); - ret_val = e1e_rphy_locked(hw, PHY_ID2, &phy_reg); + ret_val = e1e_rphy_locked(hw, MII_PHYSID2, &phy_reg); if (ret_val || (phy_reg == 0xFFFF)) { phy_id = 0; continue; @@ -346,23 +208,81 @@ static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw) if (hw->phy.id) { if (hw->phy.id == phy_id) - return true; + goto out; } else if (phy_id) { hw->phy.id = phy_id; hw->phy.revision = (u32)(phy_reg & ~PHY_REVISION_MASK); - return true; + goto out; } /* In case the PHY needs to be in mdio slow mode, * set slow mode and try to get the PHY id again. */ - hw->phy.ops.release(hw); - ret_val = e1000_set_mdio_slow_mode_hv(hw); - if (!ret_val) - ret_val = e1000e_get_phy_id(hw); - hw->phy.ops.acquire(hw); + if (hw->mac.type < e1000_pch_lpt) { + hw->phy.ops.release(hw); + ret_val = e1000_set_mdio_slow_mode_hv(hw); + if (!ret_val) + ret_val = e1000e_get_phy_id(hw); + hw->phy.ops.acquire(hw); + } + + if (ret_val) + return false; +out: + if (hw->mac.type == e1000_pch_lpt) { + /* Unforce SMBus mode in PHY */ + e1e_rphy_locked(hw, CV_SMB_CTRL, &phy_reg); + phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS; + e1e_wphy_locked(hw, CV_SMB_CTRL, phy_reg); + + /* Unforce SMBus mode in MAC */ + mac_reg = er32(CTRL_EXT); + mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, mac_reg); + } + + return true; +} + +/** + * e1000_toggle_lanphypc_pch_lpt - toggle the LANPHYPC pin value + * @hw: pointer to the HW structure + * + * Toggling the LANPHYPC pin value fully power-cycles the PHY and is + * used to reset the PHY to a quiescent state when necessary. + **/ +static void e1000_toggle_lanphypc_pch_lpt(struct e1000_hw *hw) +{ + u32 mac_reg; + + /* Set Phy Config Counter to 50msec */ + mac_reg = er32(FEXTNVM3); + mac_reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK; + mac_reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC; + ew32(FEXTNVM3, mac_reg); + + /* Toggle LANPHYPC Value bit */ + mac_reg = er32(CTRL); + mac_reg |= E1000_CTRL_LANPHYPC_OVERRIDE; + mac_reg &= ~E1000_CTRL_LANPHYPC_VALUE; + ew32(CTRL, mac_reg); + e1e_flush(); + usleep_range(10, 20); + mac_reg &= ~E1000_CTRL_LANPHYPC_OVERRIDE; + ew32(CTRL, mac_reg); + e1e_flush(); + + if (hw->mac.type < e1000_pch_lpt) { + msleep(50); + } else { + u16 count = 20; + + do { + usleep_range(5000, 10000); + } while (!(er32(CTRL_EXT) & E1000_CTRL_EXT_LPCD) && count--); - return !ret_val; + msleep(30); + } } /** @@ -374,14 +294,25 @@ static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw) **/ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) { + struct e1000_adapter *adapter = hw->adapter; u32 mac_reg, fwsm = er32(FWSM); s32 ret_val; - u16 phy_reg; + + /* Gate automatic PHY configuration by hardware on managed and + * non-managed 82579 and newer adapters. + */ + e1000_gate_hw_phy_config_ich8lan(hw, true); + + /* It is not possible to be certain of the current state of ULP + * so forcibly disable it. + */ + hw->dev_spec.ich8lan.ulp_state = e1000_ulp_state_unknown; + e1000_disable_ulp_lpt_lp(hw, true); ret_val = hw->phy.ops.acquire(hw); if (ret_val) { e_dbg("Failed to initialize PHY flow\n"); - return ret_val; + goto out; } /* The MAC-PHY interconnect may be in SMBus mode. If the PHY is @@ -400,29 +331,16 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS; ew32(CTRL_EXT, mac_reg); - /* fall-through */ - case e1000_pch2lan: - /* Gate automatic PHY configuration by hardware on - * non-managed 82579 + /* Wait 50 milliseconds for MAC to finish any retries + * that it might be trying to perform from previous + * attempts to acknowledge any phy read requests. */ - if ((hw->mac.type == e1000_pch2lan) && - !(fwsm & E1000_ICH_FWSM_FW_VALID)) - e1000_gate_hw_phy_config_ich8lan(hw, true); + msleep(50); - if (e1000_phy_is_accessible_pchlan(hw)) { - if (hw->mac.type == e1000_pch_lpt) { - /* Unforce SMBus mode in PHY */ - e1e_rphy_locked(hw, CV_SMB_CTRL, &phy_reg); - phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS; - e1e_wphy_locked(hw, CV_SMB_CTRL, phy_reg); - - /* Unforce SMBus mode in MAC */ - mac_reg = er32(CTRL_EXT); - mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS; - ew32(CTRL_EXT, mac_reg); - } + /* fall-through */ + case e1000_pch2lan: + if (e1000_phy_is_accessible_pchlan(hw)) break; - } /* fall-through */ case e1000_pchlan: @@ -432,35 +350,27 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) if (hw->phy.ops.check_reset_block(hw)) { e_dbg("Required LANPHYPC toggle blocked by ME\n"); + ret_val = -E1000_ERR_PHY; break; } - e_dbg("Toggling LANPHYPC\n"); + /* Toggle LANPHYPC Value bit */ + e1000_toggle_lanphypc_pch_lpt(hw); + if (hw->mac.type >= e1000_pch_lpt) { + if (e1000_phy_is_accessible_pchlan(hw)) + break; - /* Set Phy Config Counter to 50msec */ - mac_reg = er32(FEXTNVM3); - mac_reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK; - mac_reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC; - ew32(FEXTNVM3, mac_reg); + /* Toggling LANPHYPC brings the PHY out of SMBus mode + * so ensure that the MAC is also out of SMBus mode + */ + mac_reg = er32(CTRL_EXT); + mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, mac_reg); - /* Toggle LANPHYPC Value bit */ - mac_reg = er32(CTRL); - mac_reg |= E1000_CTRL_LANPHYPC_OVERRIDE; - mac_reg &= ~E1000_CTRL_LANPHYPC_VALUE; - ew32(CTRL, mac_reg); - e1e_flush(); - udelay(10); - mac_reg &= ~E1000_CTRL_LANPHYPC_OVERRIDE; - ew32(CTRL, mac_reg); - e1e_flush(); - if (hw->mac.type < e1000_pch_lpt) { - msleep(50); - } else { - u16 count = 20; - do { - usleep_range(5000, 10000); - } while (!(er32(CTRL_EXT) & - E1000_CTRL_EXT_LPCD) && count--); + if (e1000_phy_is_accessible_pchlan(hw)) + break; + + ret_val = -E1000_ERR_PHY; } break; default: @@ -468,14 +378,35 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) } hw->phy.ops.release(hw); + if (!ret_val) { - /* Reset the PHY before any access to it. Doing so, ensures - * that the PHY is in a known good state before we read/write - * PHY registers. The generic reset is sufficient here, - * because we haven't determined the PHY type yet. - */ - ret_val = e1000e_phy_hw_reset_generic(hw); + /* Check to see if able to reset PHY. Print error if not */ + if (hw->phy.ops.check_reset_block(hw)) { + e_err("Reset blocked by ME\n"); + goto out; + } + /* Reset the PHY before any access to it. Doing so, ensures + * that the PHY is in a known good state before we read/write + * PHY registers. The generic reset is sufficient here, + * because we haven't determined the PHY type yet. + */ + ret_val = e1000e_phy_hw_reset_generic(hw); + if (ret_val) + goto out; + + /* On a successful reset, possibly need to wait for the PHY + * to quiesce to an accessible state before returning control + * to the calling function. If the PHY does not quiesce, then + * return E1000E_BLK_PHY_RESET, as this is the condition that + * the PHY is in. + */ + ret_val = hw->phy.ops.check_reset_block(hw); + if (ret_val) + e_err("ME blocked access to PHY after reset\n"); + } + +out: /* Ungate automatic PHY configuration on non-managed 82579 */ if ((hw->mac.type == e1000_pch2lan) && !(fwsm & E1000_ICH_FWSM_FW_VALID)) { @@ -495,23 +426,23 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; - s32 ret_val = 0; + s32 ret_val; - phy->addr = 1; - phy->reset_delay_us = 100; - - phy->ops.set_page = e1000_set_page_igp; - phy->ops.read_reg = e1000_read_phy_reg_hv; - phy->ops.read_reg_locked = e1000_read_phy_reg_hv_locked; - phy->ops.read_reg_page = e1000_read_phy_reg_page_hv; - phy->ops.set_d0_lplu_state = e1000_set_lplu_state_pchlan; - phy->ops.set_d3_lplu_state = e1000_set_lplu_state_pchlan; - phy->ops.write_reg = e1000_write_phy_reg_hv; - phy->ops.write_reg_locked = e1000_write_phy_reg_hv_locked; - phy->ops.write_reg_page = e1000_write_phy_reg_page_hv; - phy->ops.power_up = e1000_power_up_phy_copper; - phy->ops.power_down = e1000_power_down_phy_copper_ich8lan; - phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; + phy->addr = 1; + phy->reset_delay_us = 100; + + phy->ops.set_page = e1000_set_page_igp; + phy->ops.read_reg = e1000_read_phy_reg_hv; + phy->ops.read_reg_locked = e1000_read_phy_reg_hv_locked; + phy->ops.read_reg_page = e1000_read_phy_reg_page_hv; + phy->ops.set_d0_lplu_state = e1000_set_lplu_state_pchlan; + phy->ops.set_d3_lplu_state = e1000_set_lplu_state_pchlan; + phy->ops.write_reg = e1000_write_phy_reg_hv; + phy->ops.write_reg_locked = e1000_write_phy_reg_hv_locked; + phy->ops.write_reg_page = e1000_write_phy_reg_page_hv; + phy->ops.power_up = e1000_power_up_phy_copper; + phy->ops.power_down = e1000_power_down_phy_copper_ich8lan; + phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; phy->id = e1000_phy_unknown; @@ -580,11 +511,11 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw) s32 ret_val; u16 i = 0; - phy->addr = 1; - phy->reset_delay_us = 100; + phy->addr = 1; + phy->reset_delay_us = 100; - phy->ops.power_up = e1000_power_up_phy_copper; - phy->ops.power_down = e1000_power_down_phy_copper_ich8lan; + phy->ops.power_up = e1000_power_up_phy_copper; + phy->ops.power_down = e1000_power_down_phy_copper_ich8lan; /* We may need to do this twice - once for IGP and if that fails, * we'll set BM func pointers and try again @@ -592,7 +523,7 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw) ret_val = e1000e_determine_phy_address(hw); if (ret_val) { phy->ops.write_reg = e1000e_write_phy_reg_bm; - phy->ops.read_reg = e1000e_read_phy_reg_bm; + phy->ops.read_reg = e1000e_read_phy_reg_bm; ret_val = e1000e_determine_phy_address(hw); if (ret_val) { e_dbg("Cannot determine PHY addr. Erroring out\n"); @@ -684,8 +615,8 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw) /* find total size of the NVM, then cut in half since the total * size represents two separate NVM banks. */ - nvm->flash_bank_size = (sector_end_addr - sector_base_addr) - << FLASH_SECTOR_ADDR_SHIFT; + nvm->flash_bank_size = ((sector_end_addr - sector_base_addr) + << FLASH_SECTOR_ADDR_SHIFT); nvm->flash_bank_size /= 2; /* Adjust to word count */ nvm->flash_bank_size /= sizeof(u16); @@ -695,7 +626,7 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw) /* Clear shadow ram */ for (i = 0; i < nvm->word_size; i++) { dev_spec->shadow_ram[i].modified = false; - dev_spec->shadow_ram[i].value = 0xFFFF; + dev_spec->shadow_ram[i].value = 0xFFFF; } return 0; @@ -772,77 +703,596 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw) if (mac->type == e1000_pch_lpt) { mac->rar_entry_count = E1000_PCH_LPT_RAR_ENTRIES; mac->ops.rar_set = e1000_rar_set_pch_lpt; + mac->ops.setup_physical_interface = + e1000_setup_copper_link_pch_lpt; + mac->ops.rar_get_count = e1000_rar_get_count_pch_lpt; } /* Enable PCS Lock-loss workaround for ICH8 */ if (mac->type == e1000_ich8lan) e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, true); - /* Gate automatic PHY configuration by hardware on managed - * 82579 and i217 - */ - if ((mac->type == e1000_pch2lan || mac->type == e1000_pch_lpt) && - (er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) - e1000_gate_hw_phy_config_ich8lan(hw, true); - return 0; } /** + * __e1000_access_emi_reg_locked - Read/write EMI register + * @hw: pointer to the HW structure + * @addr: EMI address to program + * @data: pointer to value to read/write from/to the EMI address + * @read: boolean flag to indicate read or write + * + * This helper function assumes the SW/FW/HW Semaphore is already acquired. + **/ +static s32 __e1000_access_emi_reg_locked(struct e1000_hw *hw, u16 address, + u16 *data, bool read) +{ + s32 ret_val; + + ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, address); + if (ret_val) + return ret_val; + + if (read) + ret_val = e1e_rphy_locked(hw, I82579_EMI_DATA, data); + else + ret_val = e1e_wphy_locked(hw, I82579_EMI_DATA, *data); + + return ret_val; +} + +/** + * e1000_read_emi_reg_locked - Read Extended Management Interface register + * @hw: pointer to the HW structure + * @addr: EMI address to program + * @data: value to be read from the EMI address + * + * Assumes the SW/FW/HW Semaphore is already acquired. + **/ +s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data) +{ + return __e1000_access_emi_reg_locked(hw, addr, data, true); +} + +/** + * e1000_write_emi_reg_locked - Write Extended Management Interface register + * @hw: pointer to the HW structure + * @addr: EMI address to program + * @data: value to be written to the EMI address + * + * Assumes the SW/FW/HW Semaphore is already acquired. + **/ +s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data) +{ + return __e1000_access_emi_reg_locked(hw, addr, &data, false); +} + +/** * e1000_set_eee_pchlan - Enable/disable EEE support * @hw: pointer to the HW structure * - * Enable/disable EEE based on setting in dev_spec structure. The bits in - * the LPI Control register will remain set only if/when link is up. + * Enable/disable EEE based on setting in dev_spec structure, the duplex of + * the link and the EEE capabilities of the link partner. The LPI Control + * register bits will remain set only if/when link is up. + * + * EEE LPI must not be asserted earlier than one second after link is up. + * On 82579, EEE LPI should not be enabled until such time otherwise there + * can be link issues with some switches. Other devices can have EEE LPI + * enabled immediately upon link up since they have a timer in hardware which + * prevents LPI from being asserted too early. **/ -static s32 e1000_set_eee_pchlan(struct e1000_hw *hw) +s32 e1000_set_eee_pchlan(struct e1000_hw *hw) { struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; - s32 ret_val = 0; - u16 phy_reg; + s32 ret_val; + u16 lpa, pcs_status, adv, adv_addr, lpi_ctrl, data; - if ((hw->phy.type != e1000_phy_82579) && - (hw->phy.type != e1000_phy_i217)) + switch (hw->phy.type) { + case e1000_phy_82579: + lpa = I82579_EEE_LP_ABILITY; + pcs_status = I82579_EEE_PCS_STATUS; + adv_addr = I82579_EEE_ADVERTISEMENT; + break; + case e1000_phy_i217: + lpa = I217_EEE_LP_ABILITY; + pcs_status = I217_EEE_PCS_STATUS; + adv_addr = I217_EEE_ADVERTISEMENT; + break; + default: return 0; + } - ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; - if (dev_spec->eee_disable) - phy_reg &= ~I82579_LPI_CTRL_ENABLE_MASK; - else - phy_reg |= I82579_LPI_CTRL_ENABLE_MASK; - - ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg); + ret_val = e1e_rphy_locked(hw, I82579_LPI_CTRL, &lpi_ctrl); if (ret_val) - return ret_val; + goto release; + + /* Clear bits that enable EEE in various speeds */ + lpi_ctrl &= ~I82579_LPI_CTRL_ENABLE_MASK; - if ((hw->phy.type == e1000_phy_i217) && !dev_spec->eee_disable) { + /* Enable EEE if not disabled by user */ + if (!dev_spec->eee_disable) { /* Save off link partner's EEE ability */ + ret_val = e1000_read_emi_reg_locked(hw, lpa, + &dev_spec->eee_lp_ability); + if (ret_val) + goto release; + + /* Read EEE advertisement */ + ret_val = e1000_read_emi_reg_locked(hw, adv_addr, &adv); + if (ret_val) + goto release; + + /* Enable EEE only for speeds in which the link partner is + * EEE capable and for which we advertise EEE. + */ + if (adv & dev_spec->eee_lp_ability & I82579_EEE_1000_SUPPORTED) + lpi_ctrl |= I82579_LPI_CTRL_1000_ENABLE; + + if (adv & dev_spec->eee_lp_ability & I82579_EEE_100_SUPPORTED) { + e1e_rphy_locked(hw, MII_LPA, &data); + if (data & LPA_100FULL) + lpi_ctrl |= I82579_LPI_CTRL_100_ENABLE; + else + /* EEE is not supported in 100Half, so ignore + * partner's EEE in 100 ability if full-duplex + * is not advertised. + */ + dev_spec->eee_lp_ability &= + ~I82579_EEE_100_SUPPORTED; + } + } + + if (hw->phy.type == e1000_phy_82579) { + ret_val = e1000_read_emi_reg_locked(hw, I82579_LPI_PLL_SHUT, + &data); + if (ret_val) + goto release; + + data &= ~I82579_LPI_100_PLL_SHUT; + ret_val = e1000_write_emi_reg_locked(hw, I82579_LPI_PLL_SHUT, + data); + } + + /* R/Clr IEEE MMD 3.1 bits 11:10 - Tx/Rx LPI Received */ + ret_val = e1000_read_emi_reg_locked(hw, pcs_status, &data); + if (ret_val) + goto release; + + ret_val = e1e_wphy_locked(hw, I82579_LPI_CTRL, lpi_ctrl); +release: + hw->phy.ops.release(hw); + + return ret_val; +} + +/** + * e1000_k1_workaround_lpt_lp - K1 workaround on Lynxpoint-LP + * @hw: pointer to the HW structure + * @link: link up bool flag + * + * When K1 is enabled for 1Gbps, the MAC can miss 2 DMA completion indications + * preventing further DMA write requests. Workaround the issue by disabling + * the de-assertion of the clock request when in 1Gpbs mode. + * Also, set appropriate Tx re-transmission timeouts for 10 and 100Half link + * speeds in order to avoid Tx hangs. + **/ +static s32 e1000_k1_workaround_lpt_lp(struct e1000_hw *hw, bool link) +{ + u32 fextnvm6 = er32(FEXTNVM6); + u32 status = er32(STATUS); + s32 ret_val = 0; + u16 reg; + + if (link && (status & E1000_STATUS_SPEED_1000)) { ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; - ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, - I217_EEE_LP_ABILITY); + + ret_val = + e1000e_read_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG, + ®); if (ret_val) goto release; - e1e_rphy_locked(hw, I82579_EMI_DATA, &dev_spec->eee_lp_ability); - /* EEE is not supported in 100Half, so ignore partner's EEE - * in 100 ability if full-duplex is not advertised. - */ - e1e_rphy_locked(hw, PHY_LP_ABILITY, &phy_reg); - if (!(phy_reg & NWAY_LPAR_100TX_FD_CAPS)) - dev_spec->eee_lp_ability &= ~I217_EEE_100_SUPPORTED; + ret_val = + e1000e_write_kmrn_reg_locked(hw, + E1000_KMRNCTRLSTA_K1_CONFIG, + reg & + ~E1000_KMRNCTRLSTA_K1_ENABLE); + if (ret_val) + goto release; + + usleep_range(10, 20); + + ew32(FEXTNVM6, fextnvm6 | E1000_FEXTNVM6_REQ_PLL_CLK); + + ret_val = + e1000e_write_kmrn_reg_locked(hw, + E1000_KMRNCTRLSTA_K1_CONFIG, + reg); release: hw->phy.ops.release(hw); + } else { + /* clear FEXTNVM6 bit 8 on link down or 10/100 */ + fextnvm6 &= ~E1000_FEXTNVM6_REQ_PLL_CLK; + + if (!link || ((status & E1000_STATUS_SPEED_100) && + (status & E1000_STATUS_FD))) + goto update_fextnvm6; + + ret_val = e1e_rphy(hw, I217_INBAND_CTRL, ®); + if (ret_val) + return ret_val; + + /* Clear link status transmit timeout */ + reg &= ~I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_MASK; + + if (status & E1000_STATUS_SPEED_100) { + /* Set inband Tx timeout to 5x10us for 100Half */ + reg |= 5 << I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_SHIFT; + + /* Do not extend the K1 entry latency for 100Half */ + fextnvm6 &= ~E1000_FEXTNVM6_ENABLE_K1_ENTRY_CONDITION; + } else { + /* Set inband Tx timeout to 50x10us for 10Full/Half */ + reg |= 50 << + I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_SHIFT; + + /* Extend the K1 entry latency for 10 Mbps */ + fextnvm6 |= E1000_FEXTNVM6_ENABLE_K1_ENTRY_CONDITION; + } + + ret_val = e1e_wphy(hw, I217_INBAND_CTRL, reg); + if (ret_val) + return ret_val; + +update_fextnvm6: + ew32(FEXTNVM6, fextnvm6); } + return ret_val; +} + +/** + * e1000_platform_pm_pch_lpt - Set platform power management values + * @hw: pointer to the HW structure + * @link: bool indicating link status + * + * Set the Latency Tolerance Reporting (LTR) values for the "PCIe-like" + * GbE MAC in the Lynx Point PCH based on Rx buffer size and link speed + * when link is up (which must not exceed the maximum latency supported + * by the platform), otherwise specify there is no LTR requirement. + * Unlike true-PCIe devices which set the LTR maximum snoop/no-snoop + * latencies in the LTR Extended Capability Structure in the PCIe Extended + * Capability register set, on this device LTR is set by writing the + * equivalent snoop/no-snoop latencies in the LTRV register in the MAC and + * set the SEND bit to send an Intel On-chip System Fabric sideband (IOSF-SB) + * message to the PMC. + **/ +static s32 e1000_platform_pm_pch_lpt(struct e1000_hw *hw, bool link) +{ + u32 reg = link << (E1000_LTRV_REQ_SHIFT + E1000_LTRV_NOSNOOP_SHIFT) | + link << E1000_LTRV_REQ_SHIFT | E1000_LTRV_SEND; + u16 lat_enc = 0; /* latency encoded */ + + if (link) { + u16 speed, duplex, scale = 0; + u16 max_snoop, max_nosnoop; + u16 max_ltr_enc; /* max LTR latency encoded */ + s64 lat_ns; /* latency (ns) */ + s64 value; + u32 rxa; + + if (!hw->adapter->max_frame_size) { + e_dbg("max_frame_size not set.\n"); + return -E1000_ERR_CONFIG; + } + + hw->mac.ops.get_link_up_info(hw, &speed, &duplex); + if (!speed) { + e_dbg("Speed not set.\n"); + return -E1000_ERR_CONFIG; + } + + /* Rx Packet Buffer Allocation size (KB) */ + rxa = er32(PBA) & E1000_PBA_RXA_MASK; + + /* Determine the maximum latency tolerated by the device. + * + * Per the PCIe spec, the tolerated latencies are encoded as + * a 3-bit encoded scale (only 0-5 are valid) multiplied by + * a 10-bit value (0-1023) to provide a range from 1 ns to + * 2^25*(2^10-1) ns. The scale is encoded as 0=2^0ns, + * 1=2^5ns, 2=2^10ns,...5=2^25ns. + */ + lat_ns = ((s64)rxa * 1024 - + (2 * (s64)hw->adapter->max_frame_size)) * 8 * 1000; + if (lat_ns < 0) + lat_ns = 0; + else + do_div(lat_ns, speed); + + value = lat_ns; + while (value > PCI_LTR_VALUE_MASK) { + scale++; + value = DIV_ROUND_UP(value, (1 << 5)); + } + if (scale > E1000_LTRV_SCALE_MAX) { + e_dbg("Invalid LTR latency scale %d\n", scale); + return -E1000_ERR_CONFIG; + } + lat_enc = (u16)((scale << PCI_LTR_SCALE_SHIFT) | value); + + /* Determine the maximum latency tolerated by the platform */ + pci_read_config_word(hw->adapter->pdev, E1000_PCI_LTR_CAP_LPT, + &max_snoop); + pci_read_config_word(hw->adapter->pdev, + E1000_PCI_LTR_CAP_LPT + 2, &max_nosnoop); + max_ltr_enc = max_t(u16, max_snoop, max_nosnoop); + + if (lat_enc > max_ltr_enc) + lat_enc = max_ltr_enc; + } + + /* Set Snoop and No-Snoop latencies the same */ + reg |= lat_enc | (lat_enc << E1000_LTRV_NOSNOOP_SHIFT); + ew32(LTRV, reg); + return 0; } /** + * e1000_enable_ulp_lpt_lp - configure Ultra Low Power mode for LynxPoint-LP + * @hw: pointer to the HW structure + * @to_sx: boolean indicating a system power state transition to Sx + * + * When link is down, configure ULP mode to significantly reduce the power + * to the PHY. If on a Manageability Engine (ME) enabled system, tell the + * ME firmware to start the ULP configuration. If not on an ME enabled + * system, configure the ULP mode by software. + */ +s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx) +{ + u32 mac_reg; + s32 ret_val = 0; + u16 phy_reg; + + if ((hw->mac.type < e1000_pch_lpt) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_LM) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_V) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_LM2) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_V2) || + (hw->dev_spec.ich8lan.ulp_state == e1000_ulp_state_on)) + return 0; + + if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID) { + /* Request ME configure ULP mode in the PHY */ + mac_reg = er32(H2ME); + mac_reg |= E1000_H2ME_ULP | E1000_H2ME_ENFORCE_SETTINGS; + ew32(H2ME, mac_reg); + + goto out; + } + + if (!to_sx) { + int i = 0; + + /* Poll up to 5 seconds for Cable Disconnected indication */ + while (!(er32(FEXT) & E1000_FEXT_PHY_CABLE_DISCONNECTED)) { + /* Bail if link is re-acquired */ + if (er32(STATUS) & E1000_STATUS_LU) + return -E1000_ERR_PHY; + + if (i++ == 100) + break; + + msleep(50); + } + e_dbg("CABLE_DISCONNECTED %s set after %dmsec\n", + (er32(FEXT) & + E1000_FEXT_PHY_CABLE_DISCONNECTED) ? "" : "not", i * 50); + } + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + goto out; + + /* Force SMBus mode in PHY */ + ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg); + if (ret_val) + goto release; + phy_reg |= CV_SMB_CTRL_FORCE_SMBUS; + e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg); + + /* Force SMBus mode in MAC */ + mac_reg = er32(CTRL_EXT); + mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, mac_reg); + + /* Set Inband ULP Exit, Reset to SMBus mode and + * Disable SMBus Release on PERST# in PHY + */ + ret_val = e1000_read_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, &phy_reg); + if (ret_val) + goto release; + phy_reg |= (I218_ULP_CONFIG1_RESET_TO_SMBUS | + I218_ULP_CONFIG1_DISABLE_SMB_PERST); + if (to_sx) { + if (er32(WUFC) & E1000_WUFC_LNKC) + phy_reg |= I218_ULP_CONFIG1_WOL_HOST; + + phy_reg |= I218_ULP_CONFIG1_STICKY_ULP; + } else { + phy_reg |= I218_ULP_CONFIG1_INBAND_EXIT; + } + e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg); + + /* Set Disable SMBus Release on PERST# in MAC */ + mac_reg = er32(FEXTNVM7); + mac_reg |= E1000_FEXTNVM7_DISABLE_SMB_PERST; + ew32(FEXTNVM7, mac_reg); + + /* Commit ULP changes in PHY by starting auto ULP configuration */ + phy_reg |= I218_ULP_CONFIG1_START; + e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg); +release: + hw->phy.ops.release(hw); +out: + if (ret_val) + e_dbg("Error in ULP enable flow: %d\n", ret_val); + else + hw->dev_spec.ich8lan.ulp_state = e1000_ulp_state_on; + + return ret_val; +} + +/** + * e1000_disable_ulp_lpt_lp - unconfigure Ultra Low Power mode for LynxPoint-LP + * @hw: pointer to the HW structure + * @force: boolean indicating whether or not to force disabling ULP + * + * Un-configure ULP mode when link is up, the system is transitioned from + * Sx or the driver is unloaded. If on a Manageability Engine (ME) enabled + * system, poll for an indication from ME that ULP has been un-configured. + * If not on an ME enabled system, un-configure the ULP mode by software. + * + * During nominal operation, this function is called when link is acquired + * to disable ULP mode (force=false); otherwise, for example when unloading + * the driver or during Sx->S0 transitions, this is called with force=true + * to forcibly disable ULP. + */ +static s32 e1000_disable_ulp_lpt_lp(struct e1000_hw *hw, bool force) +{ + s32 ret_val = 0; + u32 mac_reg; + u16 phy_reg; + int i = 0; + + if ((hw->mac.type < e1000_pch_lpt) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_LM) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_V) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_LM2) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_V2) || + (hw->dev_spec.ich8lan.ulp_state == e1000_ulp_state_off)) + return 0; + + if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID) { + if (force) { + /* Request ME un-configure ULP mode in the PHY */ + mac_reg = er32(H2ME); + mac_reg &= ~E1000_H2ME_ULP; + mac_reg |= E1000_H2ME_ENFORCE_SETTINGS; + ew32(H2ME, mac_reg); + } + + /* Poll up to 100msec for ME to clear ULP_CFG_DONE */ + while (er32(FWSM) & E1000_FWSM_ULP_CFG_DONE) { + if (i++ == 10) { + ret_val = -E1000_ERR_PHY; + goto out; + } + + usleep_range(10000, 20000); + } + e_dbg("ULP_CONFIG_DONE cleared after %dmsec\n", i * 10); + + if (force) { + mac_reg = er32(H2ME); + mac_reg &= ~E1000_H2ME_ENFORCE_SETTINGS; + ew32(H2ME, mac_reg); + } else { + /* Clear H2ME.ULP after ME ULP configuration */ + mac_reg = er32(H2ME); + mac_reg &= ~E1000_H2ME_ULP; + ew32(H2ME, mac_reg); + } + + goto out; + } + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + goto out; + + if (force) + /* Toggle LANPHYPC Value bit */ + e1000_toggle_lanphypc_pch_lpt(hw); + + /* Unforce SMBus mode in PHY */ + ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg); + if (ret_val) { + /* The MAC might be in PCIe mode, so temporarily force to + * SMBus mode in order to access the PHY. + */ + mac_reg = er32(CTRL_EXT); + mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, mac_reg); + + msleep(50); + + ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, + &phy_reg); + if (ret_val) + goto release; + } + phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS; + e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg); + + /* Unforce SMBus mode in MAC */ + mac_reg = er32(CTRL_EXT); + mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, mac_reg); + + /* When ULP mode was previously entered, K1 was disabled by the + * hardware. Re-Enable K1 in the PHY when exiting ULP. + */ + ret_val = e1000_read_phy_reg_hv_locked(hw, HV_PM_CTRL, &phy_reg); + if (ret_val) + goto release; + phy_reg |= HV_PM_CTRL_K1_ENABLE; + e1000_write_phy_reg_hv_locked(hw, HV_PM_CTRL, phy_reg); + + /* Clear ULP enabled configuration */ + ret_val = e1000_read_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, &phy_reg); + if (ret_val) + goto release; + phy_reg &= ~(I218_ULP_CONFIG1_IND | + I218_ULP_CONFIG1_STICKY_ULP | + I218_ULP_CONFIG1_RESET_TO_SMBUS | + I218_ULP_CONFIG1_WOL_HOST | + I218_ULP_CONFIG1_INBAND_EXIT | + I218_ULP_CONFIG1_DISABLE_SMB_PERST); + e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg); + + /* Commit ULP changes by starting auto ULP configuration */ + phy_reg |= I218_ULP_CONFIG1_START; + e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg); + + /* Clear Disable SMBus Release on PERST# in MAC */ + mac_reg = er32(FEXTNVM7); + mac_reg &= ~E1000_FEXTNVM7_DISABLE_SMB_PERST; + ew32(FEXTNVM7, mac_reg); + +release: + hw->phy.ops.release(hw); + if (force) { + e1000_phy_hw_reset(hw); + msleep(50); + } +out: + if (ret_val) + e_dbg("Error in ULP disable flow: %d\n", ret_val); + else + hw->dev_spec.ich8lan.ulp_state = e1000_ulp_state_off; + + return ret_val; +} + +/** * e1000_check_for_copper_link_ich8lan - Check for link (Copper) * @hw: pointer to the HW structure * @@ -879,11 +1329,66 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) return ret_val; } + /* When connected at 10Mbps half-duplex, some parts are excessively + * aggressive resulting in many collisions. To avoid this, increase + * the IPG and reduce Rx latency in the PHY. + */ + if (((hw->mac.type == e1000_pch2lan) || + (hw->mac.type == e1000_pch_lpt)) && link) { + u32 reg; + + reg = er32(STATUS); + if (!(reg & (E1000_STATUS_FD | E1000_STATUS_SPEED_MASK))) { + u16 emi_addr; + + reg = er32(TIPG); + reg &= ~E1000_TIPG_IPGT_MASK; + reg |= 0xFF; + ew32(TIPG, reg); + + /* Reduce Rx latency in analog PHY */ + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + + if (hw->mac.type == e1000_pch2lan) + emi_addr = I82579_RX_CONFIG; + else + emi_addr = I217_RX_CONFIG; + + ret_val = e1000_write_emi_reg_locked(hw, emi_addr, 0); + + hw->phy.ops.release(hw); + + if (ret_val) + return ret_val; + } + } + + /* Work-around I218 hang issue */ + if ((hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_LM) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_V) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_LM3) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_V3)) { + ret_val = e1000_k1_workaround_lpt_lp(hw, link); + if (ret_val) + return ret_val; + } + + if (hw->mac.type == e1000_pch_lpt) { + /* Set platform power management values for + * Latency Tolerance Reporting (LTR) + */ + ret_val = e1000_platform_pm_pch_lpt(hw, link); + if (ret_val) + return ret_val; + } + /* Clear link partner's EEE ability */ hw->dev_spec.ich8lan.eee_lp_ability = 0; if (!link) - return 0; /* No link detected */ + return 0; /* No link detected */ mac->get_link_status = false; @@ -923,9 +1428,11 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) e1000e_check_downshift(hw); /* Enable/Disable EEE after link up */ - ret_val = e1000_set_eee_pchlan(hw); - if (ret_val) - return ret_val; + if (hw->phy.type > e1000_phy_82579) { + ret_val = e1000_set_eee_pchlan(hw); + if (ret_val) + return ret_val; + } /* If we are forcing speed/duplex, then we simply return since * we have already determined whether we have link or not. @@ -1002,10 +1509,6 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter) (er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) adapter->flags2 |= FLAG2_PCIM2PCI_ARBITER_WA; - /* Disable EEE by default until IEEE802.3az spec is finalized */ - if (adapter->flags2 & FLAG2_HAS_EEE) - adapter->hw.dev_spec.ich8lan.eee_disable = true; - return 0; } @@ -1017,7 +1520,7 @@ static DEFINE_MUTEX(nvm_mutex); * * Acquires the mutex for performing NVM operations. **/ -static s32 e1000_acquire_nvm_ich8lan(struct e1000_hw *hw) +static s32 e1000_acquire_nvm_ich8lan(struct e1000_hw __always_unused *hw) { mutex_lock(&nvm_mutex); @@ -1030,7 +1533,7 @@ static s32 e1000_acquire_nvm_ich8lan(struct e1000_hw *hw) * * Releases the mutex used while performing NVM operations. **/ -static void e1000_release_nvm_ich8lan(struct e1000_hw *hw) +static void e1000_release_nvm_ich8lan(struct e1000_hw __always_unused *hw) { mutex_unlock(&nvm_mutex); } @@ -1135,8 +1638,8 @@ static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw) fwsm = er32(FWSM); return (fwsm & E1000_ICH_FWSM_FW_VALID) && - ((fwsm & E1000_FWSM_MODE_MASK) == - (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT)); + ((fwsm & E1000_FWSM_MODE_MASK) == + (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT)); } /** @@ -1153,7 +1656,7 @@ static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw) fwsm = er32(FWSM); return (fwsm & E1000_ICH_FWSM_FW_VALID) && - (fwsm & (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT)); + (fwsm & (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT)); } /** @@ -1167,7 +1670,7 @@ static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw) * contain the MAC address but RAR[1-6] are reserved for manageability (ME). * Use SHRA[0-3] in place of those reserved for ME. **/ -static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index) +static int e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index) { u32 rar_low, rar_high; @@ -1189,10 +1692,13 @@ static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index) e1e_flush(); ew32(RAH(index), rar_high); e1e_flush(); - return; + return 0; } - if (index < hw->mac.rar_entry_count) { + /* RAR[1-6] are owned by manageability. Skip those and program the + * next address into the SHRA register array. + */ + if (index < (u32)(hw->mac.rar_entry_count)) { s32 ret_val; ret_val = e1000_acquire_swflag_ich8lan(hw); @@ -1209,7 +1715,7 @@ static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index) /* verify the register updates */ if ((er32(SHRAL(index - 1)) == rar_low) && (er32(SHRAH(index - 1)) == rar_high)) - return; + return 0; e_dbg("SHRA[%d] might be locked by ME - FWSM=0x%8.8x\n", (index - 1), er32(FWSM)); @@ -1217,6 +1723,43 @@ static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index) out: e_dbg("Failed to write receive address at index %d\n", index); + return -E1000_ERR_CONFIG; +} + +/** + * e1000_rar_get_count_pch_lpt - Get the number of available SHRA + * @hw: pointer to the HW structure + * + * Get the number of available receive registers that the Host can + * program. SHRA[0-10] are the shared receive address registers + * that are shared between the Host and manageability engine (ME). + * ME can reserve any number of addresses and the host needs to be + * able to tell how many available registers it has access to. + **/ +static u32 e1000_rar_get_count_pch_lpt(struct e1000_hw *hw) +{ + u32 wlock_mac; + u32 num_entries; + + wlock_mac = er32(FWSM) & E1000_FWSM_WLOCK_MAC_MASK; + wlock_mac >>= E1000_FWSM_WLOCK_MAC_SHIFT; + + switch (wlock_mac) { + case 0: + /* All SHRA[0..10] and RAR[0] available */ + num_entries = hw->mac.rar_entry_count; + break; + case 1: + /* Only RAR[0] available */ + num_entries = 1; + break; + default: + /* SHRA[0..(wlock_mac - 1)] available + RAR[0] */ + num_entries = wlock_mac + 1; + break; + } + + return num_entries; } /** @@ -1230,7 +1773,7 @@ out: * contain the MAC address. SHRA[0-10] are the shared receive address * registers that are shared between the Host and manageability engine (ME). **/ -static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index) +static int e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index) { u32 rar_low, rar_high; u32 wlock_mac; @@ -1252,7 +1795,7 @@ static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index) e1e_flush(); ew32(RAH(index), rar_high); e1e_flush(); - return; + return 0; } /* The manageability engine (ME) can lock certain SHRAR registers that @@ -1284,12 +1827,13 @@ static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index) /* verify the register updates */ if ((er32(SHRAL_PCH_LPT(index - 1)) == rar_low) && (er32(SHRAH_PCH_LPT(index - 1)) == rar_high)) - return; + return 0; } } out: e_dbg("Failed to write receive address at index %d\n", index); + return -E1000_ERR_CONFIG; } /** @@ -1302,11 +1846,13 @@ out: **/ static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw) { - u32 fwsm; + bool blocked = false; + int i = 0; - fwsm = er32(FWSM); - - return (fwsm & E1000_ICH_FWSM_RSPCIPHY) ? 0 : E1000_BLK_PHY_RESET; + while ((blocked = !(er32(FWSM) & E1000_ICH_FWSM_RSPCIPHY)) && + (i++ < 10)) + usleep_range(10000, 20000); + return blocked ? E1000_BLK_PHY_RESET : 0; } /** @@ -1322,7 +1868,7 @@ static s32 e1000_write_smbus_addr(struct e1000_hw *hw) u32 strap = er32(STRAP); u32 freq = (strap & E1000_STRAP_SMT_FREQ_MASK) >> E1000_STRAP_SMT_FREQ_SHIFT; - s32 ret_val = 0; + s32 ret_val; strap &= E1000_STRAP_SMBUS_ADDRESS_MASK; @@ -1440,8 +1986,7 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) word_addr = (u16)(cnf_base_addr << 1); for (i = 0; i < cnf_size; i++) { - ret_val = e1000_read_nvm(hw, (word_addr + i * 2), 1, - ®_data); + ret_val = e1000_read_nvm(hw, (word_addr + i * 2), 1, ®_data); if (ret_val) goto release; @@ -1501,13 +2046,13 @@ static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link) if (ret_val) goto release; - status_reg &= BM_CS_STATUS_LINK_UP | - BM_CS_STATUS_RESOLVED | - BM_CS_STATUS_SPEED_MASK; + status_reg &= (BM_CS_STATUS_LINK_UP | + BM_CS_STATUS_RESOLVED | + BM_CS_STATUS_SPEED_MASK); if (status_reg == (BM_CS_STATUS_LINK_UP | - BM_CS_STATUS_RESOLVED | - BM_CS_STATUS_SPEED_1000)) + BM_CS_STATUS_RESOLVED | + BM_CS_STATUS_SPEED_1000)) k1_enable = false; } @@ -1516,13 +2061,13 @@ static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link) if (ret_val) goto release; - status_reg &= HV_M_STATUS_LINK_UP | - HV_M_STATUS_AUTONEG_COMPLETE | - HV_M_STATUS_SPEED_MASK; + status_reg &= (HV_M_STATUS_LINK_UP | + HV_M_STATUS_AUTONEG_COMPLETE | + HV_M_STATUS_SPEED_MASK); if (status_reg == (HV_M_STATUS_LINK_UP | - HV_M_STATUS_AUTONEG_COMPLETE | - HV_M_STATUS_SPEED_1000)) + HV_M_STATUS_AUTONEG_COMPLETE | + HV_M_STATUS_SPEED_1000)) k1_enable = false; } @@ -1558,7 +2103,7 @@ release: **/ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable) { - s32 ret_val = 0; + s32 ret_val; u32 ctrl_reg = 0; u32 ctrl_ext = 0; u32 reg = 0; @@ -1579,7 +2124,7 @@ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable) if (ret_val) return ret_val; - udelay(20); + usleep_range(20, 40); ctrl_ext = er32(CTRL_EXT); ctrl_reg = er32(CTRL); @@ -1589,11 +2134,11 @@ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable) ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_SPD_BYPS); e1e_flush(); - udelay(20); + usleep_range(20, 40); ew32(CTRL, ctrl_reg); ew32(CTRL_EXT, ctrl_ext); e1e_flush(); - udelay(20); + usleep_range(20, 40); return 0; } @@ -1667,7 +2212,6 @@ release: return ret_val; } - /** * e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode * @hw: pointer to the HW structure @@ -1727,7 +2271,7 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) */ if (hw->phy.revision < 2) { e1000e_phy_sw_reset(hw); - ret_val = e1e_wphy(hw, PHY_CONTROL, 0x3140); + ret_val = e1e_wphy(hw, MII_BMCR, 0x3140); } } @@ -1757,6 +2301,11 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) if (ret_val) goto release; ret_val = e1e_wphy_locked(hw, BM_PORT_GEN_CFG, phy_data & 0x00FF); + if (ret_val) + goto release; + + /* set MSE higher to enable link to stay up when noise is high */ + ret_val = e1000_write_emi_reg_locked(hw, I82577_MSE_THRESHOLD, 0x0034); release: hw->phy.ops.release(hw); @@ -1780,8 +2329,8 @@ void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw) if (ret_val) goto release; - /* Copy both RAL/H (rar_entry_count) and SHRAL/H (+4) to PHY */ - for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) { + /* Copy both RAL/H (rar_entry_count) and SHRAL/H to PHY */ + for (i = 0; i < (hw->mac.rar_entry_count); i++) { mac_reg = er32(RAL(i)); hw->phy.ops.write_reg_page(hw, BM_RAR_L(i), (u16)(mac_reg & 0xFFFF)); @@ -1825,11 +2374,11 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable) return ret_val; if (enable) { - /* Write Rx addresses (rar_entry_count for RAL/H, +4 for + /* Write Rx addresses (rar_entry_count for RAL/H, and * SHRAL/H) and initial CRC values to the MAC */ - for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) { - u8 mac_addr[ETH_ALEN] = {0}; + for (i = 0; i < hw->mac.rar_entry_count; i++) { + u8 mac_addr[ETH_ALEN] = { 0 }; u32 addr_high, addr_low; addr_high = er32(RAH(i)); @@ -1860,8 +2409,8 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable) ew32(RCTL, mac_reg); ret_val = e1000e_read_kmrn_reg(hw, - E1000_KMRNCTRLSTA_CTRL_OFFSET, - &data); + E1000_KMRNCTRLSTA_CTRL_OFFSET, + &data); if (ret_val) return ret_val; ret_val = e1000e_write_kmrn_reg(hw, @@ -1870,8 +2419,8 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable) if (ret_val) return ret_val; ret_val = e1000e_read_kmrn_reg(hw, - E1000_KMRNCTRLSTA_HD_CTRL, - &data); + E1000_KMRNCTRLSTA_HD_CTRL, + &data); if (ret_val) return ret_val; data &= ~(0xF << 8); @@ -1918,8 +2467,8 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable) ew32(RCTL, mac_reg); ret_val = e1000e_read_kmrn_reg(hw, - E1000_KMRNCTRLSTA_CTRL_OFFSET, - &data); + E1000_KMRNCTRLSTA_CTRL_OFFSET, + &data); if (ret_val) return ret_val; ret_val = e1000e_write_kmrn_reg(hw, @@ -1928,8 +2477,8 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable) if (ret_val) return ret_val; ret_val = e1000e_read_kmrn_reg(hw, - E1000_KMRNCTRLSTA_HD_CTRL, - &data); + E1000_KMRNCTRLSTA_HD_CTRL, + &data); if (ret_val) return ret_val; data &= ~(0xF << 8); @@ -1983,22 +2532,18 @@ static s32 e1000_lv_phy_workarounds_ich8lan(struct e1000_hw *hw) /* Set MDIO slow mode before any other MDIO access */ ret_val = e1000_set_mdio_slow_mode_hv(hw); + if (ret_val) + return ret_val; ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; - ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, I82579_MSE_THRESHOLD); - if (ret_val) - goto release; /* set MSE higher to enable link to stay up when noise is high */ - ret_val = e1e_wphy_locked(hw, I82579_EMI_DATA, 0x0034); - if (ret_val) - goto release; - ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, I82579_MSE_LINK_DOWN); + ret_val = e1000_write_emi_reg_locked(hw, I82579_MSE_THRESHOLD, 0x0034); if (ret_val) goto release; /* drop link after 5 times MSE threshold was reached */ - ret_val = e1e_wphy_locked(hw, I82579_EMI_DATA, 0x0005); + ret_val = e1000_write_emi_reg_locked(hw, I82579_MSE_LINK_DOWN, 0x0005); release: hw->phy.ops.release(hw); @@ -2009,51 +2554,44 @@ release: * e1000_k1_gig_workaround_lv - K1 Si workaround * @hw: pointer to the HW structure * - * Workaround to set the K1 beacon duration for 82579 parts + * Workaround to set the K1 beacon duration for 82579 parts in 10Mbps + * Disable K1 in 1000Mbps and 100Mbps **/ static s32 e1000_k1_workaround_lv(struct e1000_hw *hw) { s32 ret_val = 0; u16 status_reg = 0; - u32 mac_reg; - u16 phy_reg; if (hw->mac.type != e1000_pch2lan) return 0; - /* Set K1 beacon duration based on 1Gbps speed or otherwise */ + /* Set K1 beacon duration based on 10Mbs speed */ ret_val = e1e_rphy(hw, HV_M_STATUS, &status_reg); if (ret_val) return ret_val; if ((status_reg & (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE)) == (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE)) { - mac_reg = er32(FEXTNVM4); - mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK; - - ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg); - if (ret_val) - return ret_val; - - if (status_reg & HV_M_STATUS_SPEED_1000) { + if (status_reg & + (HV_M_STATUS_SPEED_1000 | HV_M_STATUS_SPEED_100)) { u16 pm_phy_reg; - mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_8USEC; - phy_reg &= ~I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT; - /* LV 1G Packet drop issue wa */ + /* LV 1G/100 Packet drop issue wa */ ret_val = e1e_rphy(hw, HV_PM_CTRL, &pm_phy_reg); if (ret_val) return ret_val; - pm_phy_reg &= ~HV_PM_CTRL_PLL_STOP_IN_K1_GIGA; + pm_phy_reg &= ~HV_PM_CTRL_K1_ENABLE; ret_val = e1e_wphy(hw, HV_PM_CTRL, pm_phy_reg); if (ret_val) return ret_val; } else { + u32 mac_reg; + + mac_reg = er32(FEXTNVM4); + mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK; mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_16USEC; - phy_reg |= I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT; + ew32(FEXTNVM4, mac_reg); } - ew32(FEXTNVM4, mac_reg); - ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg); } return ret_val; @@ -2099,7 +2637,7 @@ static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw) do { data = er32(STATUS); data &= E1000_STATUS_LAN_INIT_DONE; - udelay(100); + usleep_range(100, 200); } while ((!data) && --loop); /* If basic configuration is incomplete before the above loop @@ -2172,10 +2710,9 @@ static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw) ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; - ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, - I82579_LPI_UPDATE_TIMER); - if (!ret_val) - ret_val = e1e_wphy_locked(hw, I82579_EMI_DATA, 0x1387); + ret_val = e1000_write_emi_reg_locked(hw, + I82579_LPI_UPDATE_TIMER, + 0x1387); hw->phy.ops.release(hw); } @@ -2219,7 +2756,7 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) **/ static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active) { - s32 ret_val = 0; + s32 ret_val; u16 oem_reg; ret_val = e1e_rphy(hw, HV_OEM_BITS, &oem_reg); @@ -2277,6 +2814,8 @@ static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active) /* When LPLU is enabled, we should disable SmartSpeed */ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data); + if (ret_val) + return ret_val; data &= ~IGP01E1000_PSCFR_SMART_SPEED; ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data); if (ret_val) @@ -2443,7 +2982,7 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank) /* Check bank 0 */ ret_val = e1000_read_flash_byte_ich8lan(hw, act_offset, - &sig_byte); + &sig_byte); if (ret_val) return ret_val; if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) == @@ -2454,8 +2993,8 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank) /* Check bank 1 */ ret_val = e1000_read_flash_byte_ich8lan(hw, act_offset + - bank1_offset, - &sig_byte); + bank1_offset, + &sig_byte); if (ret_val) return ret_val; if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) == @@ -2508,8 +3047,8 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, ret_val = 0; for (i = 0; i < words; i++) { - if (dev_spec->shadow_ram[offset+i].modified) { - data[i] = dev_spec->shadow_ram[offset+i].value; + if (dev_spec->shadow_ram[offset + i].modified) { + data[i] = dev_spec->shadow_ram[offset + i].value; } else { ret_val = e1000_read_flash_word_ich8lan(hw, act_offset + i, @@ -2691,11 +3230,11 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, s32 ret_val = -E1000_ERR_NVM; u8 count = 0; - if (size < 1 || size > 2 || offset > ICH_FLASH_LINEAR_ADDR_MASK) + if (size < 1 || size > 2 || offset > ICH_FLASH_LINEAR_ADDR_MASK) return -E1000_ERR_NVM; - flash_linear_addr = (ICH_FLASH_LINEAR_ADDR_MASK & offset) + - hw->nvm.flash_base_addr; + flash_linear_addr = ((ICH_FLASH_LINEAR_ADDR_MASK & offset) + + hw->nvm.flash_base_addr); do { udelay(1); @@ -2712,8 +3251,9 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, ew32flash(ICH_FLASH_FADDR, flash_linear_addr); - ret_val = e1000_flash_cycle_ich8lan(hw, - ICH_FLASH_READ_COMMAND_TIMEOUT); + ret_val = + e1000_flash_cycle_ich8lan(hw, + ICH_FLASH_READ_COMMAND_TIMEOUT); /* Check if FCERR is set to 1, if set to 1, clear it * and try the whole sequence a few more times, else @@ -2772,8 +3312,8 @@ static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, nvm->ops.acquire(hw); for (i = 0; i < words; i++) { - dev_spec->shadow_ram[offset+i].modified = true; - dev_spec->shadow_ram[offset+i].value = data[i]; + dev_spec->shadow_ram[offset + i].modified = true; + dev_spec->shadow_ram[offset + i].value = data[i]; } nvm->ops.release(hw); @@ -2813,7 +3353,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) * write to bank 0 etc. We also need to erase the segment that * is going to be written */ - ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank); + ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank); if (ret_val) { e_dbg("Could not detect valid bank, assuming bank 0\n"); bank = 0; @@ -2842,8 +3382,8 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) data = dev_spec->shadow_ram[i].value; } else { ret_val = e1000_read_flash_word_ich8lan(hw, i + - old_bank_offset, - &data); + old_bank_offset, + &data); if (ret_val) break; } @@ -2861,7 +3401,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) /* Convert offset to bytes. */ act_offset = (i + new_bank_offset) << 1; - udelay(100); + usleep_range(100, 200); /* Write the bytes to the new bank. */ ret_val = e1000_retry_write_flash_byte_ich8lan(hw, act_offset, @@ -2869,10 +3409,10 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) if (ret_val) break; - udelay(100); + usleep_range(100, 200); ret_val = e1000_retry_write_flash_byte_ich8lan(hw, - act_offset + 1, - (u8)(data >> 8)); + act_offset + 1, + (u8)(data >> 8)); if (ret_val) break; } @@ -2949,19 +3489,32 @@ static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw) { s32 ret_val; u16 data; + u16 word; + u16 valid_csum_mask; - /* Read 0x19 and check bit 6. If this bit is 0, the checksum - * needs to be fixed. This bit is an indication that the NVM - * was prepared by OEM software and did not calculate the - * checksum...a likely scenario. + /* Read NVM and check Invalid Image CSUM bit. If this bit is 0, + * the checksum needs to be fixed. This bit is an indication that + * the NVM was prepared by OEM software and did not calculate + * the checksum...a likely scenario. */ - ret_val = e1000_read_nvm(hw, 0x19, 1, &data); + switch (hw->mac.type) { + case e1000_pch_lpt: + word = NVM_COMPAT; + valid_csum_mask = NVM_COMPAT_VALID_CSUM; + break; + default: + word = NVM_FUTURE_INIT_WORD1; + valid_csum_mask = NVM_FUTURE_INIT_WORD1_VALID_CSUM; + break; + } + + ret_val = e1000_read_nvm(hw, word, 1, &data); if (ret_val) return ret_val; - if (!(data & 0x40)) { - data |= 0x40; - ret_val = e1000_write_nvm(hw, 0x19, 1, &data); + if (!(data & valid_csum_mask)) { + data |= valid_csum_mask; + ret_val = e1000_write_nvm(hw, word, 1, &data); if (ret_val) return ret_val; ret_val = e1000e_update_nvm_checksum(hw); @@ -3035,8 +3588,8 @@ static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, offset > ICH_FLASH_LINEAR_ADDR_MASK) return -E1000_ERR_NVM; - flash_linear_addr = (ICH_FLASH_LINEAR_ADDR_MASK & offset) + - hw->nvm.flash_base_addr; + flash_linear_addr = ((ICH_FLASH_LINEAR_ADDR_MASK & offset) + + hw->nvm.flash_base_addr); do { udelay(1); @@ -3047,7 +3600,7 @@ static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, hsflctl.regval = er16flash(ICH_FLASH_HSFCTL); /* 0b/1b corresponds to 1 or 2 byte size, respectively. */ - hsflctl.hsf_ctrl.fldbcount = size -1; + hsflctl.hsf_ctrl.fldbcount = size - 1; hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE; ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval); @@ -3063,8 +3616,9 @@ static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, /* check if FCERR is set to 1 , if set to 1, clear it * and try the whole sequence a few more times else done */ - ret_val = e1000_flash_cycle_ich8lan(hw, - ICH_FLASH_WRITE_COMMAND_TIMEOUT); + ret_val = + e1000_flash_cycle_ich8lan(hw, + ICH_FLASH_WRITE_COMMAND_TIMEOUT); if (!ret_val) break; @@ -3123,7 +3677,7 @@ static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw, for (program_retries = 0; program_retries < 100; program_retries++) { e_dbg("Retrying Byte %2.2X at offset %u\n", byte, offset); - udelay(100); + usleep_range(100, 200); ret_val = e1000_write_flash_byte_ich8lan(hw, offset, byte); if (!ret_val) break; @@ -3194,8 +3748,10 @@ static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank) flash_linear_addr = hw->nvm.flash_base_addr; flash_linear_addr += (bank) ? flash_bank_size : 0; - for (j = 0; j < iteration ; j++) { + for (j = 0; j < iteration; j++) { do { + u32 timeout = ICH_FLASH_ERASE_COMMAND_TIMEOUT; + /* Steps */ ret_val = e1000_flash_cycle_init_ich8lan(hw); if (ret_val) @@ -3215,8 +3771,7 @@ static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank) flash_linear_addr += (j * sector_size); ew32flash(ICH_FLASH_FADDR, flash_linear_addr); - ret_val = e1000_flash_cycle_ich8lan(hw, - ICH_FLASH_ERASE_COMMAND_TIMEOUT); + ret_val = e1000_flash_cycle_ich8lan(hw, timeout); if (!ret_val) break; @@ -3255,8 +3810,7 @@ static s32 e1000_valid_led_default_ich8lan(struct e1000_hw *hw, u16 *data) return ret_val; } - if (*data == ID_LED_RESERVED_0000 || - *data == ID_LED_RESERVED_FFFF) + if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) *data = ID_LED_DEFAULT_ICH8LAN; return 0; @@ -3496,9 +4050,9 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) /* Initialize identification LED */ ret_val = mac->ops.id_led_init(hw); + /* An error is not fatal and we should not stop init due to this */ if (ret_val) e_dbg("Error initializing identification LED\n"); - /* This is not fatal and we should not stop init due to this */ /* Setup the receive address. */ e1000e_init_rx_addrs(hw, mac->rar_entry_count); @@ -3526,16 +4080,16 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) /* Set the transmit descriptor write-back policy for both queues */ txdctl = er32(TXDCTL(0)); - txdctl = (txdctl & ~E1000_TXDCTL_WTHRESH) | - E1000_TXDCTL_FULL_TX_DESC_WB; - txdctl = (txdctl & ~E1000_TXDCTL_PTHRESH) | - E1000_TXDCTL_MAX_TX_DESC_PREFETCH; + txdctl = ((txdctl & ~E1000_TXDCTL_WTHRESH) | + E1000_TXDCTL_FULL_TX_DESC_WB); + txdctl = ((txdctl & ~E1000_TXDCTL_PTHRESH) | + E1000_TXDCTL_MAX_TX_DESC_PREFETCH); ew32(TXDCTL(0), txdctl); txdctl = er32(TXDCTL(1)); - txdctl = (txdctl & ~E1000_TXDCTL_WTHRESH) | - E1000_TXDCTL_FULL_TX_DESC_WB; - txdctl = (txdctl & ~E1000_TXDCTL_PTHRESH) | - E1000_TXDCTL_MAX_TX_DESC_PREFETCH; + txdctl = ((txdctl & ~E1000_TXDCTL_WTHRESH) | + E1000_TXDCTL_FULL_TX_DESC_WB); + txdctl = ((txdctl & ~E1000_TXDCTL_PTHRESH) | + E1000_TXDCTL_MAX_TX_DESC_PREFETCH); ew32(TXDCTL(1), txdctl); /* ICH8 has opposite polarity of no_snoop bits. @@ -3544,7 +4098,7 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) if (mac->type == e1000_ich8lan) snoop = PCIE_ICH8_SNOOP_ALL; else - snoop = (u32) ~(PCIE_NO_SNOOP_ALL); + snoop = (u32)~(PCIE_NO_SNOOP_ALL); e1000e_set_pcie_no_snoop(hw, snoop); ctrl_ext = er32(CTRL_EXT); @@ -3560,6 +4114,7 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) return ret_val; } + /** * e1000_initialize_hw_bits_ich8lan - Initialize required hardware bits * @hw: pointer to the HW structure @@ -3624,6 +4179,17 @@ static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw) if (hw->mac.type == e1000_ich8lan) reg |= (E1000_RFCTL_IPV6_EX_DIS | E1000_RFCTL_NEW_IPV6_EXT_DIS); ew32(RFCTL, reg); + + /* Enable ECC on Lynxpoint */ + if (hw->mac.type == e1000_pch_lpt) { + reg = er32(PBECCSTS); + reg |= E1000_PBECCSTS_ECC_ENABLE; + ew32(PBECCSTS, reg); + + reg = er32(CTRL); + reg |= E1000_CTRL_MEHE; + ew32(CTRL, reg); + } } /** @@ -3660,8 +4226,7 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw) */ hw->fc.current_mode = hw->fc.requested_mode; - e_dbg("After fix-ups FlowControl is now = %x\n", - hw->fc.current_mode); + e_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.current_mode); /* Continue to configure the copper link. */ ret_val = hw->mac.ops.setup_physical_interface(hw); @@ -3711,12 +4276,12 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw) if (ret_val) return ret_val; ret_val = e1000e_read_kmrn_reg(hw, E1000_KMRNCTRLSTA_INBAND_PARAM, - ®_data); + ®_data); if (ret_val) return ret_val; reg_data |= 0x3F; ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_INBAND_PARAM, - reg_data); + reg_data); if (ret_val) return ret_val; @@ -3734,7 +4299,6 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw) break; case e1000_phy_82577: case e1000_phy_82579: - case e1000_phy_i217: ret_val = e1000_copper_link_setup_82577(hw); if (ret_val) return ret_val; @@ -3770,6 +4334,31 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw) } /** + * e1000_setup_copper_link_pch_lpt - Configure MAC/PHY interface + * @hw: pointer to the HW structure + * + * Calls the PHY specific link setup function and then calls the + * generic setup_copper_link to finish configuring the link for + * Lynxpoint PCH devices + **/ +static s32 e1000_setup_copper_link_pch_lpt(struct e1000_hw *hw) +{ + u32 ctrl; + s32 ret_val; + + ctrl = er32(CTRL); + ctrl |= E1000_CTRL_SLU; + ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); + ew32(CTRL, ctrl); + + ret_val = e1000_copper_link_setup_82577(hw); + if (ret_val) + return ret_val; + + return e1000e_setup_copper_link(hw); +} + +/** * e1000_get_link_up_info_ich8lan - Get current link speed and duplex * @hw: pointer to the HW structure * @speed: pointer to store current link speed @@ -3789,8 +4378,7 @@ static s32 e1000_get_link_up_info_ich8lan(struct e1000_hw *hw, u16 *speed, return ret_val; if ((hw->mac.type == e1000_ich8lan) && - (hw->phy.type == e1000_phy_igp_3) && - (*speed == SPEED_1000)) { + (hw->phy.type == e1000_phy_igp_3) && (*speed == SPEED_1000)) { ret_val = e1000_kmrn_lock_loss_workaround_ich8lan(hw); } @@ -3873,7 +4461,7 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw) * /disabled - false). **/ void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw, - bool state) + bool state) { struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; @@ -3899,7 +4487,7 @@ void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw) { u32 reg; u16 data; - u8 retry = 0; + u8 retry = 0; if (hw->phy.type != e1000_phy_igp_3) return; @@ -3955,17 +4543,16 @@ void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw) return; ret_val = e1000e_read_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET, - ®_data); + ®_data); if (ret_val) return; reg_data |= E1000_KMRNCTRLSTA_DIAG_NELPBK; ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET, - reg_data); + reg_data); if (ret_val) return; reg_data &= ~E1000_KMRNCTRLSTA_DIAG_NELPBK; - ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET, - reg_data); + e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET, reg_data); } /** @@ -3990,8 +4577,18 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) phy_ctrl = er32(PHY_CTRL); phy_ctrl |= E1000_PHY_CTRL_GBE_DISABLE; + if (hw->phy.type == e1000_phy_i217) { - u16 phy_reg; + u16 phy_reg, device_id = hw->adapter->pdev->device; + + if ((device_id == E1000_DEV_ID_PCH_LPTLP_I218_LM) || + (device_id == E1000_DEV_ID_PCH_LPTLP_I218_V) || + (device_id == E1000_DEV_ID_PCH_I218_LM3) || + (device_id == E1000_DEV_ID_PCH_I218_V3)) { + u32 fextnvm6 = er32(FEXTNVM6); + + ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK); + } ret_val = hw->phy.ops.acquire(hw); if (ret_val) @@ -4000,19 +4597,20 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) if (!dev_spec->eee_disable) { u16 eee_advert; - ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, - I217_EEE_ADVERTISEMENT); + ret_val = + e1000_read_emi_reg_locked(hw, + I217_EEE_ADVERTISEMENT, + &eee_advert); if (ret_val) goto release; - e1e_rphy_locked(hw, I82579_EMI_DATA, &eee_advert); /* Disable LPLU if both link partners support 100BaseT * EEE and 100Full is advertised on both ends of the * link. */ - if ((eee_advert & I217_EEE_100_SUPPORTED) && + if ((eee_advert & I82579_EEE_100_SUPPORTED) && (dev_spec->eee_lp_ability & - I217_EEE_100_SUPPORTED) && + I82579_EEE_100_SUPPORTED) && (hw->phy.autoneg_advertised & ADVERTISE_100_FULL)) phy_ctrl &= ~(E1000_PHY_CTRL_D0A_LPLU | E1000_PHY_CTRL_NOND0A_LPLU); @@ -4026,7 +4624,6 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) * The SMBus release must also be disabled on LCD reset. */ if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) { - /* Enable proxy to reset only on power good. */ e1e_rphy_locked(hw, I217_PROXY_CTRL, &phy_reg); phy_reg |= I217_PROXY_CTRL_AUTO_DISABLE; @@ -4287,7 +4884,7 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw) u32 bank = 0; u32 status; - e1000e_get_cfg_done(hw); + e1000e_get_cfg_done_generic(hw); /* Wait for indication from h/w that it has completed basic config */ if (hw->mac.type >= e1000_ich10lan) { @@ -4416,10 +5013,11 @@ static const struct e1000_mac_operations ich8_mac_ops = { .reset_hw = e1000_reset_hw_ich8lan, .init_hw = e1000_init_hw_ich8lan, .setup_link = e1000_setup_link_ich8lan, - .setup_physical_interface= e1000_setup_copper_link_ich8lan, + .setup_physical_interface = e1000_setup_copper_link_ich8lan, /* id_led_init dependent on mac type */ .config_collision_dist = e1000e_config_collision_dist_generic, .rar_set = e1000e_rar_set_generic, + .rar_get_count = e1000e_rar_get_count_generic, }; static const struct e1000_phy_operations ich8_phy_ops = { @@ -4438,7 +5036,7 @@ static const struct e1000_phy_operations ich8_phy_ops = { static const struct e1000_nvm_operations ich8_nvm_ops = { .acquire = e1000_acquire_nvm_ich8lan, - .read = e1000_read_nvm_ich8lan, + .read = e1000_read_nvm_ich8lan, .release = e1000_release_nvm_ich8lan, .reload = e1000e_reload_nvm_generic, .update = e1000_update_nvm_checksum_ich8lan, @@ -4520,6 +5118,7 @@ const struct e1000_info e1000_pch2_info = { .mac = e1000_pch2lan, .flags = FLAG_IS_ICH | FLAG_HAS_WOL + | FLAG_HAS_HW_TIMESTAMP | FLAG_HAS_CTRLEXT_ON_LOAD | FLAG_HAS_AMT | FLAG_HAS_FLASH @@ -4528,7 +5127,7 @@ const struct e1000_info e1000_pch2_info = { .flags2 = FLAG2_HAS_PHY_STATS | FLAG2_HAS_EEE, .pba = 26, - .max_hw_frame_size = DEFAULT_JUMBO, + .max_hw_frame_size = 9018, .get_variants = e1000_get_variants_ich8lan, .mac_ops = &ich8_mac_ops, .phy_ops = &ich8_phy_ops, @@ -4539,6 +5138,7 @@ const struct e1000_info e1000_pch_lpt_info = { .mac = e1000_pch_lpt, .flags = FLAG_IS_ICH | FLAG_HAS_WOL + | FLAG_HAS_HW_TIMESTAMP | FLAG_HAS_CTRLEXT_ON_LOAD | FLAG_HAS_AMT | FLAG_HAS_FLASH @@ -4547,7 +5147,7 @@ const struct e1000_info e1000_pch_lpt_info = { .flags2 = FLAG2_HAS_PHY_STATS | FLAG2_HAS_EEE, .pba = 26, - .max_hw_frame_size = DEFAULT_JUMBO, + .max_hw_frame_size = 9018, .get_variants = e1000_get_variants_ich8lan, .mac_ops = &ich8_mac_ops, .phy_ops = &ich8_phy_ops, |