diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/ich8lan.c')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ich8lan.c | 571 |
1 files changed, 466 insertions, 105 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index af08188d7e6..8894ab8ed6b 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1,30 +1,23 @@ -/******************************************************************************* - - Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2013 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - Linux NICS <linux.nics@intel.com> - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +/* Intel PRO/1000 Linux driver + * Copyright(c) 1999 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * Linux NICS <linux.nics@intel.com> + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ /* 82562G 10/100 Network Connection * 82562G-2 10/100 Network Connection @@ -53,6 +46,14 @@ * 82578DC Gigabit Network Connection * 82579LM Gigabit Network Connection * 82579V Gigabit Network Connection + * Ethernet Connection I217-LM + * Ethernet Connection I217-V + * Ethernet Connection I218-V + * Ethernet Connection I218-LM + * Ethernet Connection (2) I218-LM + * Ethernet Connection (2) I218-V + * Ethernet Connection (3) I218-LM + * Ethernet Connection (3) I218-V */ #include "e1000.h" @@ -138,11 +139,14 @@ static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link); static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw); static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw); static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw); -static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index); -static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index); +static int e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index); +static int e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index); +static u32 e1000_rar_get_count_pch_lpt(struct e1000_hw *hw); static s32 e1000_k1_workaround_lv(struct e1000_hw *hw); static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate); +static s32 e1000_disable_ulp_lpt_lp(struct e1000_hw *hw, bool force); static s32 e1000_setup_copper_link_pch_lpt(struct e1000_hw *hw); +static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state); static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg) { @@ -183,7 +187,7 @@ static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw) { u16 phy_reg = 0; u32 phy_id = 0; - s32 ret_val; + s32 ret_val = 0; u16 retry_count; u32 mac_reg = 0; @@ -214,11 +218,13 @@ static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw) /* In case the PHY needs to be in mdio slow mode, * set slow mode and try to get the PHY id again. */ - hw->phy.ops.release(hw); - ret_val = e1000_set_mdio_slow_mode_hv(hw); - if (!ret_val) - ret_val = e1000e_get_phy_id(hw); - hw->phy.ops.acquire(hw); + if (hw->mac.type < e1000_pch_lpt) { + hw->phy.ops.release(hw); + ret_val = e1000_set_mdio_slow_mode_hv(hw); + if (!ret_val) + ret_val = e1000e_get_phy_id(hw); + hw->phy.ops.acquire(hw); + } if (ret_val) return false; @@ -239,6 +245,47 @@ out: } /** + * e1000_toggle_lanphypc_pch_lpt - toggle the LANPHYPC pin value + * @hw: pointer to the HW structure + * + * Toggling the LANPHYPC pin value fully power-cycles the PHY and is + * used to reset the PHY to a quiescent state when necessary. + **/ +static void e1000_toggle_lanphypc_pch_lpt(struct e1000_hw *hw) +{ + u32 mac_reg; + + /* Set Phy Config Counter to 50msec */ + mac_reg = er32(FEXTNVM3); + mac_reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK; + mac_reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC; + ew32(FEXTNVM3, mac_reg); + + /* Toggle LANPHYPC Value bit */ + mac_reg = er32(CTRL); + mac_reg |= E1000_CTRL_LANPHYPC_OVERRIDE; + mac_reg &= ~E1000_CTRL_LANPHYPC_VALUE; + ew32(CTRL, mac_reg); + e1e_flush(); + usleep_range(10, 20); + mac_reg &= ~E1000_CTRL_LANPHYPC_OVERRIDE; + ew32(CTRL, mac_reg); + e1e_flush(); + + if (hw->mac.type < e1000_pch_lpt) { + msleep(50); + } else { + u16 count = 20; + + do { + usleep_range(5000, 10000); + } while (!(er32(CTRL_EXT) & E1000_CTRL_EXT_LPCD) && count--); + + msleep(30); + } +} + +/** * e1000_init_phy_workarounds_pchlan - PHY initialization workarounds * @hw: pointer to the HW structure * @@ -247,6 +294,7 @@ out: **/ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) { + struct e1000_adapter *adapter = hw->adapter; u32 mac_reg, fwsm = er32(FWSM); s32 ret_val; @@ -255,6 +303,12 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) */ e1000_gate_hw_phy_config_ich8lan(hw, true); + /* It is not possible to be certain of the current state of ULP + * so forcibly disable it. + */ + hw->dev_spec.ich8lan.ulp_state = e1000_ulp_state_unknown; + e1000_disable_ulp_lpt_lp(hw, true); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) { e_dbg("Failed to initialize PHY flow\n"); @@ -300,33 +354,9 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) break; } - e_dbg("Toggling LANPHYPC\n"); - - /* Set Phy Config Counter to 50msec */ - mac_reg = er32(FEXTNVM3); - mac_reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK; - mac_reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC; - ew32(FEXTNVM3, mac_reg); - /* Toggle LANPHYPC Value bit */ - mac_reg = er32(CTRL); - mac_reg |= E1000_CTRL_LANPHYPC_OVERRIDE; - mac_reg &= ~E1000_CTRL_LANPHYPC_VALUE; - ew32(CTRL, mac_reg); - e1e_flush(); - usleep_range(10, 20); - mac_reg &= ~E1000_CTRL_LANPHYPC_OVERRIDE; - ew32(CTRL, mac_reg); - e1e_flush(); - if (hw->mac.type < e1000_pch_lpt) { - msleep(50); - } else { - u16 count = 20; - do { - usleep_range(5000, 10000); - } while (!(er32(CTRL_EXT) & - E1000_CTRL_EXT_LPCD) && count--); - usleep_range(30000, 60000); + e1000_toggle_lanphypc_pch_lpt(hw); + if (hw->mac.type >= e1000_pch_lpt) { if (e1000_phy_is_accessible_pchlan(hw)) break; @@ -349,12 +379,31 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) hw->phy.ops.release(hw); if (!ret_val) { + + /* Check to see if able to reset PHY. Print error if not */ + if (hw->phy.ops.check_reset_block(hw)) { + e_err("Reset blocked by ME\n"); + goto out; + } + /* Reset the PHY before any access to it. Doing so, ensures * that the PHY is in a known good state before we read/write * PHY registers. The generic reset is sufficient here, * because we haven't determined the PHY type yet. */ ret_val = e1000e_phy_hw_reset_generic(hw); + if (ret_val) + goto out; + + /* On a successful reset, possibly need to wait for the PHY + * to quiesce to an accessible state before returning control + * to the calling function. If the PHY does not quiesce, then + * return E1000E_BLK_PHY_RESET, as this is the condition that + * the PHY is in. + */ + ret_val = hw->phy.ops.check_reset_block(hw); + if (ret_val) + e_err("ME blocked access to PHY after reset\n"); } out: @@ -656,6 +705,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw) mac->ops.rar_set = e1000_rar_set_pch_lpt; mac->ops.setup_physical_interface = e1000_setup_copper_link_pch_lpt; + mac->ops.rar_get_count = e1000_rar_get_count_pch_lpt; } /* Enable PCS Lock-loss workaround for ICH8 */ @@ -724,8 +774,14 @@ s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data) * Enable/disable EEE based on setting in dev_spec structure, the duplex of * the link and the EEE capabilities of the link partner. The LPI Control * register bits will remain set only if/when link is up. + * + * EEE LPI must not be asserted earlier than one second after link is up. + * On 82579, EEE LPI should not be enabled until such time otherwise there + * can be link issues with some switches. Other devices can have EEE LPI + * enabled immediately upon link up since they have a timer in hardware which + * prevents LPI from being asserted too early. **/ -static s32 e1000_set_eee_pchlan(struct e1000_hw *hw) +s32 e1000_set_eee_pchlan(struct e1000_hw *hw) { struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; s32 ret_val; @@ -790,6 +846,17 @@ static s32 e1000_set_eee_pchlan(struct e1000_hw *hw) } } + if (hw->phy.type == e1000_phy_82579) { + ret_val = e1000_read_emi_reg_locked(hw, I82579_LPI_PLL_SHUT, + &data); + if (ret_val) + goto release; + + data &= ~I82579_LPI_100_PLL_SHUT; + ret_val = e1000_write_emi_reg_locked(hw, I82579_LPI_PLL_SHUT, + data); + } + /* R/Clr IEEE MMD 3.1 bits 11:10 - Tx/Rx LPI Received */ ret_val = e1000_read_emi_reg_locked(hw, pcs_status, &data); if (ret_val) @@ -979,6 +1046,253 @@ static s32 e1000_platform_pm_pch_lpt(struct e1000_hw *hw, bool link) } /** + * e1000_enable_ulp_lpt_lp - configure Ultra Low Power mode for LynxPoint-LP + * @hw: pointer to the HW structure + * @to_sx: boolean indicating a system power state transition to Sx + * + * When link is down, configure ULP mode to significantly reduce the power + * to the PHY. If on a Manageability Engine (ME) enabled system, tell the + * ME firmware to start the ULP configuration. If not on an ME enabled + * system, configure the ULP mode by software. + */ +s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx) +{ + u32 mac_reg; + s32 ret_val = 0; + u16 phy_reg; + + if ((hw->mac.type < e1000_pch_lpt) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_LM) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_V) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_LM2) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_V2) || + (hw->dev_spec.ich8lan.ulp_state == e1000_ulp_state_on)) + return 0; + + if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID) { + /* Request ME configure ULP mode in the PHY */ + mac_reg = er32(H2ME); + mac_reg |= E1000_H2ME_ULP | E1000_H2ME_ENFORCE_SETTINGS; + ew32(H2ME, mac_reg); + + goto out; + } + + if (!to_sx) { + int i = 0; + + /* Poll up to 5 seconds for Cable Disconnected indication */ + while (!(er32(FEXT) & E1000_FEXT_PHY_CABLE_DISCONNECTED)) { + /* Bail if link is re-acquired */ + if (er32(STATUS) & E1000_STATUS_LU) + return -E1000_ERR_PHY; + + if (i++ == 100) + break; + + msleep(50); + } + e_dbg("CABLE_DISCONNECTED %s set after %dmsec\n", + (er32(FEXT) & + E1000_FEXT_PHY_CABLE_DISCONNECTED) ? "" : "not", i * 50); + } + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + goto out; + + /* Force SMBus mode in PHY */ + ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg); + if (ret_val) + goto release; + phy_reg |= CV_SMB_CTRL_FORCE_SMBUS; + e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg); + + /* Force SMBus mode in MAC */ + mac_reg = er32(CTRL_EXT); + mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, mac_reg); + + /* Set Inband ULP Exit, Reset to SMBus mode and + * Disable SMBus Release on PERST# in PHY + */ + ret_val = e1000_read_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, &phy_reg); + if (ret_val) + goto release; + phy_reg |= (I218_ULP_CONFIG1_RESET_TO_SMBUS | + I218_ULP_CONFIG1_DISABLE_SMB_PERST); + if (to_sx) { + if (er32(WUFC) & E1000_WUFC_LNKC) + phy_reg |= I218_ULP_CONFIG1_WOL_HOST; + + phy_reg |= I218_ULP_CONFIG1_STICKY_ULP; + } else { + phy_reg |= I218_ULP_CONFIG1_INBAND_EXIT; + } + e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg); + + /* Set Disable SMBus Release on PERST# in MAC */ + mac_reg = er32(FEXTNVM7); + mac_reg |= E1000_FEXTNVM7_DISABLE_SMB_PERST; + ew32(FEXTNVM7, mac_reg); + + /* Commit ULP changes in PHY by starting auto ULP configuration */ + phy_reg |= I218_ULP_CONFIG1_START; + e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg); +release: + hw->phy.ops.release(hw); +out: + if (ret_val) + e_dbg("Error in ULP enable flow: %d\n", ret_val); + else + hw->dev_spec.ich8lan.ulp_state = e1000_ulp_state_on; + + return ret_val; +} + +/** + * e1000_disable_ulp_lpt_lp - unconfigure Ultra Low Power mode for LynxPoint-LP + * @hw: pointer to the HW structure + * @force: boolean indicating whether or not to force disabling ULP + * + * Un-configure ULP mode when link is up, the system is transitioned from + * Sx or the driver is unloaded. If on a Manageability Engine (ME) enabled + * system, poll for an indication from ME that ULP has been un-configured. + * If not on an ME enabled system, un-configure the ULP mode by software. + * + * During nominal operation, this function is called when link is acquired + * to disable ULP mode (force=false); otherwise, for example when unloading + * the driver or during Sx->S0 transitions, this is called with force=true + * to forcibly disable ULP. + */ +static s32 e1000_disable_ulp_lpt_lp(struct e1000_hw *hw, bool force) +{ + s32 ret_val = 0; + u32 mac_reg; + u16 phy_reg; + int i = 0; + + if ((hw->mac.type < e1000_pch_lpt) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_LM) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_V) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_LM2) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_V2) || + (hw->dev_spec.ich8lan.ulp_state == e1000_ulp_state_off)) + return 0; + + if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID) { + if (force) { + /* Request ME un-configure ULP mode in the PHY */ + mac_reg = er32(H2ME); + mac_reg &= ~E1000_H2ME_ULP; + mac_reg |= E1000_H2ME_ENFORCE_SETTINGS; + ew32(H2ME, mac_reg); + } + + /* Poll up to 100msec for ME to clear ULP_CFG_DONE */ + while (er32(FWSM) & E1000_FWSM_ULP_CFG_DONE) { + if (i++ == 10) { + ret_val = -E1000_ERR_PHY; + goto out; + } + + usleep_range(10000, 20000); + } + e_dbg("ULP_CONFIG_DONE cleared after %dmsec\n", i * 10); + + if (force) { + mac_reg = er32(H2ME); + mac_reg &= ~E1000_H2ME_ENFORCE_SETTINGS; + ew32(H2ME, mac_reg); + } else { + /* Clear H2ME.ULP after ME ULP configuration */ + mac_reg = er32(H2ME); + mac_reg &= ~E1000_H2ME_ULP; + ew32(H2ME, mac_reg); + } + + goto out; + } + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + goto out; + + if (force) + /* Toggle LANPHYPC Value bit */ + e1000_toggle_lanphypc_pch_lpt(hw); + + /* Unforce SMBus mode in PHY */ + ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg); + if (ret_val) { + /* The MAC might be in PCIe mode, so temporarily force to + * SMBus mode in order to access the PHY. + */ + mac_reg = er32(CTRL_EXT); + mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, mac_reg); + + msleep(50); + + ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, + &phy_reg); + if (ret_val) + goto release; + } + phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS; + e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg); + + /* Unforce SMBus mode in MAC */ + mac_reg = er32(CTRL_EXT); + mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, mac_reg); + + /* When ULP mode was previously entered, K1 was disabled by the + * hardware. Re-Enable K1 in the PHY when exiting ULP. + */ + ret_val = e1000_read_phy_reg_hv_locked(hw, HV_PM_CTRL, &phy_reg); + if (ret_val) + goto release; + phy_reg |= HV_PM_CTRL_K1_ENABLE; + e1000_write_phy_reg_hv_locked(hw, HV_PM_CTRL, phy_reg); + + /* Clear ULP enabled configuration */ + ret_val = e1000_read_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, &phy_reg); + if (ret_val) + goto release; + phy_reg &= ~(I218_ULP_CONFIG1_IND | + I218_ULP_CONFIG1_STICKY_ULP | + I218_ULP_CONFIG1_RESET_TO_SMBUS | + I218_ULP_CONFIG1_WOL_HOST | + I218_ULP_CONFIG1_INBAND_EXIT | + I218_ULP_CONFIG1_DISABLE_SMB_PERST); + e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg); + + /* Commit ULP changes by starting auto ULP configuration */ + phy_reg |= I218_ULP_CONFIG1_START; + e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg); + + /* Clear Disable SMBus Release on PERST# in MAC */ + mac_reg = er32(FEXTNVM7); + mac_reg &= ~E1000_FEXTNVM7_DISABLE_SMB_PERST; + ew32(FEXTNVM7, mac_reg); + +release: + hw->phy.ops.release(hw); + if (force) { + e1000_phy_hw_reset(hw); + msleep(50); + } +out: + if (ret_val) + e_dbg("Error in ULP disable flow: %d\n", ret_val); + else + hw->dev_spec.ich8lan.ulp_state = e1000_ulp_state_off; + + return ret_val; +} + +/** * e1000_check_for_copper_link_ich8lan - Check for link (Copper) * @hw: pointer to the HW structure * @@ -1015,14 +1329,18 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) return ret_val; } - /* When connected at 10Mbps half-duplex, 82579 parts are excessively + /* When connected at 10Mbps half-duplex, some parts are excessively * aggressive resulting in many collisions. To avoid this, increase * the IPG and reduce Rx latency in the PHY. */ - if ((hw->mac.type == e1000_pch2lan) && link) { + if (((hw->mac.type == e1000_pch2lan) || + (hw->mac.type == e1000_pch_lpt)) && link) { u32 reg; + reg = er32(STATUS); if (!(reg & (E1000_STATUS_FD | E1000_STATUS_SPEED_MASK))) { + u16 emi_addr; + reg = er32(TIPG); reg &= ~E1000_TIPG_IPGT_MASK; reg |= 0xFF; @@ -1033,8 +1351,12 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) if (ret_val) return ret_val; - ret_val = - e1000_write_emi_reg_locked(hw, I82579_RX_CONFIG, 0); + if (hw->mac.type == e1000_pch2lan) + emi_addr = I82579_RX_CONFIG; + else + emi_addr = I217_RX_CONFIG; + + ret_val = e1000_write_emi_reg_locked(hw, emi_addr, 0); hw->phy.ops.release(hw); @@ -1106,9 +1428,11 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) e1000e_check_downshift(hw); /* Enable/Disable EEE after link up */ - ret_val = e1000_set_eee_pchlan(hw); - if (ret_val) - return ret_val; + if (hw->phy.type > e1000_phy_82579) { + ret_val = e1000_set_eee_pchlan(hw); + if (ret_val) + return ret_val; + } /* If we are forcing speed/duplex, then we simply return since * we have already determined whether we have link or not. @@ -1313,9 +1637,9 @@ static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw) u32 fwsm; fwsm = er32(FWSM); - return ((fwsm & E1000_ICH_FWSM_FW_VALID) && + return (fwsm & E1000_ICH_FWSM_FW_VALID) && ((fwsm & E1000_FWSM_MODE_MASK) == - (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT))); + (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT)); } /** @@ -1346,7 +1670,7 @@ static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw) * contain the MAC address but RAR[1-6] are reserved for manageability (ME). * Use SHRA[0-3] in place of those reserved for ME. **/ -static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index) +static int e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index) { u32 rar_low, rar_high; @@ -1368,10 +1692,13 @@ static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index) e1e_flush(); ew32(RAH(index), rar_high); e1e_flush(); - return; + return 0; } - if (index < hw->mac.rar_entry_count) { + /* RAR[1-6] are owned by manageability. Skip those and program the + * next address into the SHRA register array. + */ + if (index < (u32)(hw->mac.rar_entry_count)) { s32 ret_val; ret_val = e1000_acquire_swflag_ich8lan(hw); @@ -1388,7 +1715,7 @@ static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index) /* verify the register updates */ if ((er32(SHRAL(index - 1)) == rar_low) && (er32(SHRAH(index - 1)) == rar_high)) - return; + return 0; e_dbg("SHRA[%d] might be locked by ME - FWSM=0x%8.8x\n", (index - 1), er32(FWSM)); @@ -1396,6 +1723,43 @@ static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index) out: e_dbg("Failed to write receive address at index %d\n", index); + return -E1000_ERR_CONFIG; +} + +/** + * e1000_rar_get_count_pch_lpt - Get the number of available SHRA + * @hw: pointer to the HW structure + * + * Get the number of available receive registers that the Host can + * program. SHRA[0-10] are the shared receive address registers + * that are shared between the Host and manageability engine (ME). + * ME can reserve any number of addresses and the host needs to be + * able to tell how many available registers it has access to. + **/ +static u32 e1000_rar_get_count_pch_lpt(struct e1000_hw *hw) +{ + u32 wlock_mac; + u32 num_entries; + + wlock_mac = er32(FWSM) & E1000_FWSM_WLOCK_MAC_MASK; + wlock_mac >>= E1000_FWSM_WLOCK_MAC_SHIFT; + + switch (wlock_mac) { + case 0: + /* All SHRA[0..10] and RAR[0] available */ + num_entries = hw->mac.rar_entry_count; + break; + case 1: + /* Only RAR[0] available */ + num_entries = 1; + break; + default: + /* SHRA[0..(wlock_mac - 1)] available + RAR[0] */ + num_entries = wlock_mac + 1; + break; + } + + return num_entries; } /** @@ -1409,7 +1773,7 @@ out: * contain the MAC address. SHRA[0-10] are the shared receive address * registers that are shared between the Host and manageability engine (ME). **/ -static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index) +static int e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index) { u32 rar_low, rar_high; u32 wlock_mac; @@ -1431,7 +1795,7 @@ static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index) e1e_flush(); ew32(RAH(index), rar_high); e1e_flush(); - return; + return 0; } /* The manageability engine (ME) can lock certain SHRAR registers that @@ -1463,12 +1827,13 @@ static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index) /* verify the register updates */ if ((er32(SHRAL_PCH_LPT(index - 1)) == rar_low) && (er32(SHRAH_PCH_LPT(index - 1)) == rar_high)) - return; + return 0; } } out: e_dbg("Failed to write receive address at index %d\n", index); + return -E1000_ERR_CONFIG; } /** @@ -1481,11 +1846,13 @@ out: **/ static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw) { - u32 fwsm; + bool blocked = false; + int i = 0; - fwsm = er32(FWSM); - - return (fwsm & E1000_ICH_FWSM_RSPCIPHY) ? 0 : E1000_BLK_PHY_RESET; + while ((blocked = !(er32(FWSM) & E1000_ICH_FWSM_RSPCIPHY)) && + (i++ < 10)) + usleep_range(10000, 20000); + return blocked ? E1000_BLK_PHY_RESET : 0; } /** @@ -1962,8 +2329,8 @@ void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw) if (ret_val) goto release; - /* Copy both RAL/H (rar_entry_count) and SHRAL/H (+4) to PHY */ - for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) { + /* Copy both RAL/H (rar_entry_count) and SHRAL/H to PHY */ + for (i = 0; i < (hw->mac.rar_entry_count); i++) { mac_reg = er32(RAL(i)); hw->phy.ops.write_reg_page(hw, BM_RAR_L(i), (u16)(mac_reg & 0xFFFF)); @@ -2007,10 +2374,10 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable) return ret_val; if (enable) { - /* Write Rx addresses (rar_entry_count for RAL/H, +4 for + /* Write Rx addresses (rar_entry_count for RAL/H, and * SHRAL/H) and initial CRC values to the MAC */ - for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) { + for (i = 0; i < hw->mac.rar_entry_count; i++) { u8 mac_addr[ETH_ALEN] = { 0 }; u32 addr_high, addr_low; @@ -2187,51 +2554,44 @@ release: * e1000_k1_gig_workaround_lv - K1 Si workaround * @hw: pointer to the HW structure * - * Workaround to set the K1 beacon duration for 82579 parts + * Workaround to set the K1 beacon duration for 82579 parts in 10Mbps + * Disable K1 in 1000Mbps and 100Mbps **/ static s32 e1000_k1_workaround_lv(struct e1000_hw *hw) { s32 ret_val = 0; u16 status_reg = 0; - u32 mac_reg; - u16 phy_reg; if (hw->mac.type != e1000_pch2lan) return 0; - /* Set K1 beacon duration based on 1Gbps speed or otherwise */ + /* Set K1 beacon duration based on 10Mbs speed */ ret_val = e1e_rphy(hw, HV_M_STATUS, &status_reg); if (ret_val) return ret_val; if ((status_reg & (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE)) == (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE)) { - mac_reg = er32(FEXTNVM4); - mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK; - - ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg); - if (ret_val) - return ret_val; - - if (status_reg & HV_M_STATUS_SPEED_1000) { + if (status_reg & + (HV_M_STATUS_SPEED_1000 | HV_M_STATUS_SPEED_100)) { u16 pm_phy_reg; - mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_8USEC; - phy_reg &= ~I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT; - /* LV 1G Packet drop issue wa */ + /* LV 1G/100 Packet drop issue wa */ ret_val = e1e_rphy(hw, HV_PM_CTRL, &pm_phy_reg); if (ret_val) return ret_val; - pm_phy_reg &= ~HV_PM_CTRL_PLL_STOP_IN_K1_GIGA; + pm_phy_reg &= ~HV_PM_CTRL_K1_ENABLE; ret_val = e1e_wphy(hw, HV_PM_CTRL, pm_phy_reg); if (ret_val) return ret_val; } else { + u32 mac_reg; + + mac_reg = er32(FEXTNVM4); + mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK; mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_16USEC; - phy_reg |= I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT; + ew32(FEXTNVM4, mac_reg); } - ew32(FEXTNVM4, mac_reg); - ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg); } return ret_val; @@ -4657,6 +5017,7 @@ static const struct e1000_mac_operations ich8_mac_ops = { /* id_led_init dependent on mac type */ .config_collision_dist = e1000e_config_collision_dist_generic, .rar_set = e1000e_rar_set_generic, + .rar_get_count = e1000e_rar_get_count_generic, }; static const struct e1000_phy_operations ich8_phy_ops = { |