diff options
Diffstat (limited to 'drivers/net/ethernet/dec/tulip/xircom_cb.c')
| -rw-r--r-- | drivers/net/ethernet/dec/tulip/xircom_cb.c | 311 |
1 files changed, 164 insertions, 147 deletions
diff --git a/drivers/net/ethernet/dec/tulip/xircom_cb.c b/drivers/net/ethernet/dec/tulip/xircom_cb.c index 988b8eb24d3..6204cdfe43a 100644 --- a/drivers/net/ethernet/dec/tulip/xircom_cb.c +++ b/drivers/net/ethernet/dec/tulip/xircom_cb.c @@ -28,7 +28,6 @@ #include <linux/etherdevice.h> #include <linux/skbuff.h> #include <linux/delay.h> -#include <linux/init.h> #include <linux/bitops.h> #include <asm/uaccess.h> @@ -41,7 +40,9 @@ MODULE_DESCRIPTION("Xircom Cardbus ethernet driver"); MODULE_AUTHOR("Arjan van de Ven <arjanv@redhat.com>"); MODULE_LICENSE("GPL"); - +#define xw32(reg, val) iowrite32(val, ioaddr + (reg)) +#define xr32(reg) ioread32(ioaddr + (reg)) +#define xr8(reg) ioread8(ioaddr + (reg)) /* IO registers on the card, offsets */ #define CSR0 0x00 @@ -83,7 +84,7 @@ struct xircom_private { struct sk_buff *tx_skb[4]; - unsigned long io_port; + void __iomem *ioaddr; int open; /* transmit_used is the rotating counter that indicates which transmit @@ -137,7 +138,7 @@ static int link_status(struct xircom_private *card); static DEFINE_PCI_DEVICE_TABLE(xircom_pci_table) = { - {0x115D, 0x0003, PCI_ANY_ID, PCI_ANY_ID,}, + { PCI_VDEVICE(XIRCOM, 0x0003), }, {0,}, }; MODULE_DEVICE_TABLE(pci, xircom_pci_table); @@ -147,8 +148,6 @@ static struct pci_driver xircom_ops = { .id_table = xircom_pci_table, .probe = xircom_probe, .remove = xircom_remove, - .suspend =NULL, - .resume =NULL }; @@ -190,17 +189,20 @@ static const struct net_device_ops netdev_ops = { first two packets that get send, and pump hates that. */ -static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_id *id) +static int xircom_probe(struct pci_dev *pdev, const struct pci_device_id *id) { + struct device *d = &pdev->dev; struct net_device *dev = NULL; struct xircom_private *private; unsigned long flags; unsigned short tmp16; + int rc; /* First do the PCI initialisation */ - if (pci_enable_device(pdev)) - return -ENODEV; + rc = pci_enable_device(pdev); + if (rc < 0) + goto out; /* disable all powermanagement */ pci_write_config_dword(pdev, PCI_POWERMGMT, 0x0000); @@ -211,44 +213,49 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_ pci_read_config_word (pdev,PCI_STATUS, &tmp16); pci_write_config_word (pdev, PCI_STATUS,tmp16); - if (!request_region(pci_resource_start(pdev, 0), 128, "xircom_cb")) { + rc = pci_request_regions(pdev, "xircom_cb"); + if (rc < 0) { pr_err("%s: failed to allocate io-region\n", __func__); - return -ENODEV; + goto err_disable; } + rc = -ENOMEM; /* Before changing the hardware, allocate the memory. This way, we can fail gracefully if not enough memory is available. */ dev = alloc_etherdev(sizeof(struct xircom_private)); - if (!dev) { - pr_err("%s: failed to allocate etherdev\n", __func__); - goto device_fail; - } + if (!dev) + goto err_release; + private = netdev_priv(dev); /* Allocate the send/receive buffers */ - private->rx_buffer = pci_alloc_consistent(pdev,8192,&private->rx_dma_handle); - if (private->rx_buffer == NULL) { - pr_err("%s: no memory for rx buffer\n", __func__); + private->rx_buffer = dma_alloc_coherent(d, 8192, + &private->rx_dma_handle, + GFP_KERNEL); + if (private->rx_buffer == NULL) goto rx_buf_fail; - } - private->tx_buffer = pci_alloc_consistent(pdev,8192,&private->tx_dma_handle); - if (private->tx_buffer == NULL) { - pr_err("%s: no memory for tx buffer\n", __func__); + + private->tx_buffer = dma_alloc_coherent(d, 8192, + &private->tx_dma_handle, + GFP_KERNEL); + if (private->tx_buffer == NULL) goto tx_buf_fail; - } SET_NETDEV_DEV(dev, &pdev->dev); private->dev = dev; private->pdev = pdev; - private->io_port = pci_resource_start(pdev, 0); + + /* IO range. */ + private->ioaddr = pci_iomap(pdev, 0, 0); + if (!private->ioaddr) + goto reg_fail; + spin_lock_init(&private->lock); - dev->irq = pdev->irq; - dev->base_addr = private->io_port; initialize_card(private); read_mac_address(private); @@ -257,9 +264,10 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_ dev->netdev_ops = &netdev_ops; pci_set_drvdata(pdev, dev); - if (register_netdev(dev)) { + rc = register_netdev(dev); + if (rc < 0) { pr_err("%s: netdevice registration failed\n", __func__); - goto reg_fail; + goto err_unmap; } netdev_info(dev, "Xircom cardbus revision %i at irq %i\n", @@ -274,17 +282,22 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_ spin_unlock_irqrestore(&private->lock,flags); trigger_receive(private); +out: + return rc; - return 0; - +err_unmap: + pci_iounmap(pdev, private->ioaddr); reg_fail: - kfree(private->tx_buffer); + dma_free_coherent(d, 8192, private->tx_buffer, private->tx_dma_handle); tx_buf_fail: - kfree(private->rx_buffer); + dma_free_coherent(d, 8192, private->rx_buffer, private->rx_dma_handle); rx_buf_fail: free_netdev(dev); -device_fail: - return -ENODEV; +err_release: + pci_release_regions(pdev); +err_disable: + pci_disable_device(pdev); + goto out; } @@ -294,29 +307,31 @@ device_fail: Interrupts and such are already stopped in the "ifconfig ethX down" code. */ -static void __devexit xircom_remove(struct pci_dev *pdev) +static void xircom_remove(struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata(pdev); struct xircom_private *card = netdev_priv(dev); + struct device *d = &pdev->dev; - pci_free_consistent(pdev,8192,card->rx_buffer,card->rx_dma_handle); - pci_free_consistent(pdev,8192,card->tx_buffer,card->tx_dma_handle); - - release_region(dev->base_addr, 128); unregister_netdev(dev); + pci_iounmap(pdev, card->ioaddr); + dma_free_coherent(d, 8192, card->tx_buffer, card->tx_dma_handle); + dma_free_coherent(d, 8192, card->rx_buffer, card->rx_dma_handle); free_netdev(dev); - pci_set_drvdata(pdev, NULL); + pci_release_regions(pdev); + pci_disable_device(pdev); } static irqreturn_t xircom_interrupt(int irq, void *dev_instance) { struct net_device *dev = (struct net_device *) dev_instance; struct xircom_private *card = netdev_priv(dev); + void __iomem *ioaddr = card->ioaddr; unsigned int status; int i; spin_lock(&card->lock); - status = inl(card->io_port+CSR5); + status = xr32(CSR5); #if defined DEBUG && DEBUG > 1 print_binary(status); @@ -346,7 +361,7 @@ static irqreturn_t xircom_interrupt(int irq, void *dev_instance) /* Clear all remaining interrupts */ status |= 0xffffffff; /* FIXME: make this clear only the real existing bits */ - outl(status,card->io_port+CSR5); + xw32(CSR5, status); for (i=0;i<NUMDESCRIPTORS;i++) @@ -424,11 +439,11 @@ static netdev_tx_t xircom_start_xmit(struct sk_buff *skb, static int xircom_open(struct net_device *dev) { struct xircom_private *xp = netdev_priv(dev); + const int irq = xp->pdev->irq; int retval; - netdev_info(dev, "xircom cardbus adaptor found, using irq %i\n", - dev->irq); - retval = request_irq(dev->irq, xircom_interrupt, IRQF_SHARED, dev->name, dev); + netdev_info(dev, "xircom cardbus adaptor found, using irq %i\n", irq); + retval = request_irq(irq, xircom_interrupt, IRQF_SHARED, dev->name, dev); if (retval) return retval; @@ -460,7 +475,7 @@ static int xircom_close(struct net_device *dev) spin_unlock_irqrestore(&card->lock,flags); card->open = 0; - free_irq(dev->irq,dev); + free_irq(card->pdev->irq, dev); return 0; @@ -470,35 +485,39 @@ static int xircom_close(struct net_device *dev) #ifdef CONFIG_NET_POLL_CONTROLLER static void xircom_poll_controller(struct net_device *dev) { - disable_irq(dev->irq); - xircom_interrupt(dev->irq, dev); - enable_irq(dev->irq); + struct xircom_private *xp = netdev_priv(dev); + const int irq = xp->pdev->irq; + + disable_irq(irq); + xircom_interrupt(irq, dev); + enable_irq(irq); } #endif static void initialize_card(struct xircom_private *card) { - unsigned int val; + void __iomem *ioaddr = card->ioaddr; unsigned long flags; + u32 val; spin_lock_irqsave(&card->lock, flags); /* First: reset the card */ - val = inl(card->io_port + CSR0); + val = xr32(CSR0); val |= 0x01; /* Software reset */ - outl(val, card->io_port + CSR0); + xw32(CSR0, val); udelay(100); /* give the card some time to reset */ - val = inl(card->io_port + CSR0); + val = xr32(CSR0); val &= ~0x01; /* disable Software reset */ - outl(val, card->io_port + CSR0); + xw32(CSR0, val); val = 0; /* Value 0x00 is a safe and conservative value for the PCI configuration settings */ - outl(val, card->io_port + CSR0); + xw32(CSR0, val); disable_all_interrupts(card); @@ -516,10 +535,9 @@ ignored; I chose zero. */ static void trigger_transmit(struct xircom_private *card) { - unsigned int val; + void __iomem *ioaddr = card->ioaddr; - val = 0; - outl(val, card->io_port + CSR1); + xw32(CSR1, 0); } /* @@ -531,10 +549,9 @@ ignored; I chose zero. */ static void trigger_receive(struct xircom_private *card) { - unsigned int val; + void __iomem *ioaddr = card->ioaddr; - val = 0; - outl(val, card->io_port + CSR2); + xw32(CSR2, 0); } /* @@ -543,6 +560,7 @@ descriptors and programs the addresses into the card. */ static void setup_descriptors(struct xircom_private *card) { + void __iomem *ioaddr = card->ioaddr; u32 address; int i; @@ -572,7 +590,7 @@ static void setup_descriptors(struct xircom_private *card) wmb(); /* Write the receive descriptor ring address to the card */ address = card->rx_dma_handle; - outl(address, card->io_port + CSR3); /* Receive descr list address */ + xw32(CSR3, address); /* Receive descr list address */ /* transmit descriptors */ @@ -597,7 +615,7 @@ static void setup_descriptors(struct xircom_private *card) wmb(); /* wite the transmit descriptor ring to the card */ address = card->tx_dma_handle; - outl(address, card->io_port + CSR4); /* xmit descr list address */ + xw32(CSR4, address); /* xmit descr list address */ } /* @@ -606,11 +624,12 @@ valid by setting the address in the card to 0x00. */ static void remove_descriptors(struct xircom_private *card) { + void __iomem *ioaddr = card->ioaddr; unsigned int val; val = 0; - outl(val, card->io_port + CSR3); /* Receive descriptor address */ - outl(val, card->io_port + CSR4); /* Send descriptor address */ + xw32(CSR3, val); /* Receive descriptor address */ + xw32(CSR4, val); /* Send descriptor address */ } /* @@ -621,17 +640,17 @@ This function also clears the status-bit. */ static int link_status_changed(struct xircom_private *card) { + void __iomem *ioaddr = card->ioaddr; unsigned int val; - val = inl(card->io_port + CSR5); /* Status register */ - - if ((val & (1 << 27)) == 0) /* no change */ + val = xr32(CSR5); /* Status register */ + if (!(val & (1 << 27))) /* no change */ return 0; /* clear the event by writing a 1 to the bit in the status register. */ val = (1 << 27); - outl(val, card->io_port + CSR5); + xw32(CSR5, val); return 1; } @@ -643,11 +662,9 @@ in a non-stopped state. */ static int transmit_active(struct xircom_private *card) { - unsigned int val; - - val = inl(card->io_port + CSR5); /* Status register */ + void __iomem *ioaddr = card->ioaddr; - if ((val & (7 << 20)) == 0) /* transmitter disabled */ + if (!(xr32(CSR5) & (7 << 20))) /* transmitter disabled */ return 0; return 1; @@ -659,11 +676,9 @@ in a non-stopped state. */ static int receive_active(struct xircom_private *card) { - unsigned int val; - - val = inl(card->io_port + CSR5); /* Status register */ + void __iomem *ioaddr = card->ioaddr; - if ((val & (7 << 17)) == 0) /* receiver disabled */ + if (!(xr32(CSR5) & (7 << 17))) /* receiver disabled */ return 0; return 1; @@ -681,10 +696,11 @@ must be called with the lock held and interrupts disabled. */ static void activate_receiver(struct xircom_private *card) { + void __iomem *ioaddr = card->ioaddr; unsigned int val; int counter; - val = inl(card->io_port + CSR6); /* Operation mode */ + val = xr32(CSR6); /* Operation mode */ /* If the "active" bit is set and the receiver is already active, no need to do the expensive thing */ @@ -693,7 +709,7 @@ static void activate_receiver(struct xircom_private *card) val = val & ~2; /* disable the receiver */ - outl(val, card->io_port + CSR6); + xw32(CSR6, val); counter = 10; while (counter > 0) { @@ -707,9 +723,9 @@ static void activate_receiver(struct xircom_private *card) } /* enable the receiver */ - val = inl(card->io_port + CSR6); /* Operation mode */ - val = val | 2; /* enable the receiver */ - outl(val, card->io_port + CSR6); + val = xr32(CSR6); /* Operation mode */ + val = val | 2; /* enable the receiver */ + xw32(CSR6, val); /* now wait for the card to activate again */ counter = 10; @@ -734,12 +750,13 @@ must be called with the lock held and interrupts disabled. */ static void deactivate_receiver(struct xircom_private *card) { + void __iomem *ioaddr = card->ioaddr; unsigned int val; int counter; - val = inl(card->io_port + CSR6); /* Operation mode */ - val = val & ~2; /* disable the receiver */ - outl(val, card->io_port + CSR6); + val = xr32(CSR6); /* Operation mode */ + val = val & ~2; /* disable the receiver */ + xw32(CSR6, val); counter = 10; while (counter > 0) { @@ -766,10 +783,11 @@ must be called with the lock held and interrupts disabled. */ static void activate_transmitter(struct xircom_private *card) { + void __iomem *ioaddr = card->ioaddr; unsigned int val; int counter; - val = inl(card->io_port + CSR6); /* Operation mode */ + val = xr32(CSR6); /* Operation mode */ /* If the "active" bit is set and the receiver is already active, no need to do the expensive thing */ @@ -777,7 +795,7 @@ static void activate_transmitter(struct xircom_private *card) return; val = val & ~(1 << 13); /* disable the transmitter */ - outl(val, card->io_port + CSR6); + xw32(CSR6, val); counter = 10; while (counter > 0) { @@ -792,9 +810,9 @@ static void activate_transmitter(struct xircom_private *card) } /* enable the transmitter */ - val = inl(card->io_port + CSR6); /* Operation mode */ + val = xr32(CSR6); /* Operation mode */ val = val | (1 << 13); /* enable the transmitter */ - outl(val, card->io_port + CSR6); + xw32(CSR6, val); /* now wait for the card to activate again */ counter = 10; @@ -819,12 +837,13 @@ must be called with the lock held and interrupts disabled. */ static void deactivate_transmitter(struct xircom_private *card) { + void __iomem *ioaddr = card->ioaddr; unsigned int val; int counter; - val = inl(card->io_port + CSR6); /* Operation mode */ + val = xr32(CSR6); /* Operation mode */ val = val & ~2; /* disable the transmitter */ - outl(val, card->io_port + CSR6); + xw32(CSR6, val); counter = 20; while (counter > 0) { @@ -847,11 +866,12 @@ must be called with the lock held and interrupts disabled. */ static void enable_transmit_interrupt(struct xircom_private *card) { + void __iomem *ioaddr = card->ioaddr; unsigned int val; - val = inl(card->io_port + CSR7); /* Interrupt enable register */ - val |= 1; /* enable the transmit interrupt */ - outl(val, card->io_port + CSR7); + val = xr32(CSR7); /* Interrupt enable register */ + val |= 1; /* enable the transmit interrupt */ + xw32(CSR7, val); } @@ -862,11 +882,12 @@ must be called with the lock held and interrupts disabled. */ static void enable_receive_interrupt(struct xircom_private *card) { + void __iomem *ioaddr = card->ioaddr; unsigned int val; - val = inl(card->io_port + CSR7); /* Interrupt enable register */ - val = val | (1 << 6); /* enable the receive interrupt */ - outl(val, card->io_port + CSR7); + val = xr32(CSR7); /* Interrupt enable register */ + val = val | (1 << 6); /* enable the receive interrupt */ + xw32(CSR7, val); } /* @@ -876,11 +897,12 @@ must be called with the lock held and interrupts disabled. */ static void enable_link_interrupt(struct xircom_private *card) { + void __iomem *ioaddr = card->ioaddr; unsigned int val; - val = inl(card->io_port + CSR7); /* Interrupt enable register */ - val = val | (1 << 27); /* enable the link status chage interrupt */ - outl(val, card->io_port + CSR7); + val = xr32(CSR7); /* Interrupt enable register */ + val = val | (1 << 27); /* enable the link status chage interrupt */ + xw32(CSR7, val); } @@ -892,10 +914,9 @@ must be called with the lock held and interrupts disabled. */ static void disable_all_interrupts(struct xircom_private *card) { - unsigned int val; + void __iomem *ioaddr = card->ioaddr; - val = 0; /* disable all interrupts */ - outl(val, card->io_port + CSR7); + xw32(CSR7, 0); } /* @@ -905,9 +926,10 @@ must be called with the lock held and interrupts disabled. */ static void enable_common_interrupts(struct xircom_private *card) { + void __iomem *ioaddr = card->ioaddr; unsigned int val; - val = inl(card->io_port + CSR7); /* Interrupt enable register */ + val = xr32(CSR7); /* Interrupt enable register */ val |= (1<<16); /* Normal Interrupt Summary */ val |= (1<<15); /* Abnormal Interrupt Summary */ val |= (1<<13); /* Fatal bus error */ @@ -916,7 +938,7 @@ static void enable_common_interrupts(struct xircom_private *card) val |= (1<<5); /* Transmit Underflow */ val |= (1<<2); /* Transmit Buffer Unavailable */ val |= (1<<1); /* Transmit Process Stopped */ - outl(val, card->io_port + CSR7); + xw32(CSR7, val); } /* @@ -926,11 +948,12 @@ must be called with the lock held and interrupts disabled. */ static int enable_promisc(struct xircom_private *card) { + void __iomem *ioaddr = card->ioaddr; unsigned int val; - val = inl(card->io_port + CSR6); + val = xr32(CSR6); val = val | (1 << 6); - outl(val, card->io_port + CSR6); + xw32(CSR6, val); return 1; } @@ -945,13 +968,16 @@ Must be called in locked state with interrupts disabled */ static int link_status(struct xircom_private *card) { - unsigned int val; + void __iomem *ioaddr = card->ioaddr; + u8 val; - val = inb(card->io_port + CSR12); + val = xr8(CSR12); - if (!(val&(1<<2))) /* bit 2 is 0 for 10mbit link, 1 for not an 10mbit link */ + /* bit 2 is 0 for 10mbit link, 1 for not an 10mbit link */ + if (!(val & (1 << 2))) return 10; - if (!(val&(1<<1))) /* bit 1 is 0 for 100mbit link, 1 for not an 100mbit link */ + /* bit 1 is 0 for 100mbit link, 1 for not an 100mbit link */ + if (!(val & (1 << 1))) return 100; /* If we get here -> no link at all */ @@ -970,29 +996,31 @@ static int link_status(struct xircom_private *card) */ static void read_mac_address(struct xircom_private *card) { - unsigned char j, tuple, link, data_id, data_count; + void __iomem *ioaddr = card->ioaddr; unsigned long flags; + u8 link; int i; spin_lock_irqsave(&card->lock, flags); - outl(1 << 12, card->io_port + CSR9); /* enable boot rom access */ + xw32(CSR9, 1 << 12); /* enable boot rom access */ for (i = 0x100; i < 0x1f7; i += link + 2) { - outl(i, card->io_port + CSR10); - tuple = inl(card->io_port + CSR9) & 0xff; - outl(i + 1, card->io_port + CSR10); - link = inl(card->io_port + CSR9) & 0xff; - outl(i + 2, card->io_port + CSR10); - data_id = inl(card->io_port + CSR9) & 0xff; - outl(i + 3, card->io_port + CSR10); - data_count = inl(card->io_port + CSR9) & 0xff; + u8 tuple, data_id, data_count; + + xw32(CSR10, i); + tuple = xr32(CSR9); + xw32(CSR10, i + 1); + link = xr32(CSR9); + xw32(CSR10, i + 2); + data_id = xr32(CSR9); + xw32(CSR10, i + 3); + data_count = xr32(CSR9); if ((tuple == 0x22) && (data_id == 0x04) && (data_count == 0x06)) { - /* - * This is it. We have the data we want. - */ + int j; + for (j = 0; j < 6; j++) { - outl(i + j + 4, card->io_port + CSR10); - card->dev->dev_addr[j] = inl(card->io_port + CSR9) & 0xff; + xw32(CSR10, i + j + 4); + card->dev->dev_addr[j] = xr32(CSR9) & 0xff; } break; } else if (link == 0) { @@ -1011,6 +1039,7 @@ static void read_mac_address(struct xircom_private *card) */ static void transceiver_voodoo(struct xircom_private *card) { + void __iomem *ioaddr = card->ioaddr; unsigned long flags; /* disable all powermanagement */ @@ -1020,14 +1049,14 @@ static void transceiver_voodoo(struct xircom_private *card) spin_lock_irqsave(&card->lock, flags); - outl(0x0008, card->io_port + CSR15); - udelay(25); - outl(0xa8050000, card->io_port + CSR15); - udelay(25); - outl(0xa00f0000, card->io_port + CSR15); - udelay(25); + xw32(CSR15, 0x0008); + udelay(25); + xw32(CSR15, 0xa8050000); + udelay(25); + xw32(CSR15, 0xa00f0000); + udelay(25); - spin_unlock_irqrestore(&card->lock, flags); + spin_unlock_irqrestore(&card->lock, flags); netif_start_queue(card->dev); } @@ -1085,7 +1114,7 @@ investigate_read_descriptor(struct net_device *dev, struct xircom_private *card, pkt_len = 1518; } - skb = dev_alloc_skb(pkt_len + 2); + skb = netdev_alloc_skb(dev, pkt_len + 2); if (skb == NULL) { dev->stats.rx_dropped++; goto out; @@ -1139,16 +1168,4 @@ investigate_write_descriptor(struct net_device *dev, } } -static int __init xircom_init(void) -{ - return pci_register_driver(&xircom_ops); -} - -static void __exit xircom_exit(void) -{ - pci_unregister_driver(&xircom_ops); -} - -module_init(xircom_init) -module_exit(xircom_exit) - +module_pci_driver(xircom_ops); |