diff options
Diffstat (limited to 'drivers/net/ethernet/davicom/dm9000.c')
| -rw-r--r-- | drivers/net/ethernet/davicom/dm9000.c | 92 |
1 files changed, 52 insertions, 40 deletions
diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c index 7080ad6c401..13723c96d1a 100644 --- a/drivers/net/ethernet/davicom/dm9000.c +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -23,7 +23,6 @@ #include <linux/ioport.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> -#include <linux/init.h> #include <linux/interrupt.h> #include <linux/skbuff.h> #include <linux/spinlock.h> @@ -110,8 +109,9 @@ typedef struct board_info { u8 imr_all; unsigned int flags; - unsigned int in_suspend :1; - unsigned int wake_supported :1; + unsigned int in_timeout:1; + unsigned int in_suspend:1; + unsigned int wake_supported:1; enum dm9000_type type; @@ -162,7 +162,7 @@ static inline board_info_t *to_dm9000_board(struct net_device *dev) * Read a byte from I/O port */ static u8 -ior(board_info_t * db, int reg) +ior(board_info_t *db, int reg) { writeb(reg, db->io_addr); return readb(db->io_data); @@ -173,7 +173,7 @@ ior(board_info_t * db, int reg) */ static void -iow(board_info_t * db, int reg, int value) +iow(board_info_t *db, int reg, int value) { writeb(reg, db->io_addr); writeb(value, db->io_data); @@ -188,13 +188,13 @@ dm9000_reset(board_info_t *db) * The essential point is that we have to do a double reset, and the * instruction is to set LBK into MAC internal loopback mode. */ - iow(db, DM9000_NCR, 0x03); + iow(db, DM9000_NCR, NCR_RST | NCR_MAC_LBK); udelay(100); /* Application note says at least 20 us */ if (ior(db, DM9000_NCR) & 1) dev_err(db->dev, "dm9000 did not respond to first reset\n"); iow(db, DM9000_NCR, 0); - iow(db, DM9000_NCR, 0x03); + iow(db, DM9000_NCR, NCR_RST | NCR_MAC_LBK); udelay(100); if (ior(db, DM9000_NCR) & 1) dev_err(db->dev, "dm9000 did not respond to second reset\n"); @@ -274,7 +274,7 @@ static void dm9000_dumpblk_32bit(void __iomem *reg, int count) */ static void dm9000_msleep(board_info_t *db, unsigned int ms) { - if (db->in_suspend) + if (db->in_suspend || db->in_timeout) mdelay(ms); else msleep(ms); @@ -335,7 +335,8 @@ dm9000_phy_write(struct net_device *dev, unsigned long reg_save; dm9000_dbg(db, 5, "phy_write[%02x] = %04x\n", reg, value); - mutex_lock(&db->addr_lock); + if (!db->in_timeout) + mutex_lock(&db->addr_lock); spin_lock_irqsave(&db->lock, flags); @@ -366,7 +367,8 @@ dm9000_phy_write(struct net_device *dev, writeb(reg_save, db->io_addr); spin_unlock_irqrestore(&db->lock, flags); - mutex_unlock(&db->addr_lock); + if (!db->in_timeout) + mutex_unlock(&db->addr_lock); } /* dm9000_set_io @@ -745,9 +747,9 @@ static const struct ethtool_ops dm9000_ethtool_ops = { .get_link = dm9000_get_link, .get_wol = dm9000_get_wol, .set_wol = dm9000_set_wol, - .get_eeprom_len = dm9000_get_eeprom_len, - .get_eeprom = dm9000_get_eeprom, - .set_eeprom = dm9000_set_eeprom, + .get_eeprom_len = dm9000_get_eeprom_len, + .get_eeprom = dm9000_get_eeprom, + .set_eeprom = dm9000_set_eeprom, }; static void dm9000_show_carrier(board_info_t *db, @@ -795,7 +797,7 @@ dm9000_poll_work(struct work_struct *w) } } else mii_check_media(&db->mii, netif_msg_link(db), 0); - + if (netif_running(ndev)) dm9000_schedule_poll(db); } @@ -883,6 +885,18 @@ dm9000_hash_table(struct net_device *dev) spin_unlock_irqrestore(&db->lock, flags); } +static void +dm9000_mask_interrupts(board_info_t *db) +{ + iow(db, DM9000_IMR, IMR_PAR); +} + +static void +dm9000_unmask_interrupts(board_info_t *db) +{ + iow(db, DM9000_IMR, db->imr_all); +} + /* * Initialize dm9000 board */ @@ -895,6 +909,9 @@ dm9000_init_dm9000(struct net_device *dev) dm9000_dbg(db, 1, "entering %s\n", __func__); + dm9000_reset(db); + dm9000_mask_interrupts(db); + /* I/O mode */ db->io_mode = ior(db, DM9000_ISR) >> 6; /* ISR bit7:6 keeps I/O mode */ @@ -942,9 +959,6 @@ dm9000_init_dm9000(struct net_device *dev) db->imr_all = imr; - /* Enable TX/RX interrupt mask */ - iow(db, DM9000_IMR, imr); - /* Init Driver variable */ db->tx_pkt_cnt = 0; db->queue_pkt_len = 0; @@ -960,17 +974,19 @@ static void dm9000_timeout(struct net_device *dev) /* Save previous register address */ spin_lock_irqsave(&db->lock, flags); + db->in_timeout = 1; reg_save = readb(db->io_addr); netif_stop_queue(dev); - dm9000_reset(db); dm9000_init_dm9000(dev); + dm9000_unmask_interrupts(db); /* We can accept TX packets again */ dev->trans_start = jiffies; /* prevent tx timeout */ netif_wake_queue(dev); /* Restore previous register address */ writeb(reg_save, db->io_addr); + db->in_timeout = 0; spin_unlock_irqrestore(&db->lock, flags); } @@ -1034,7 +1050,7 @@ dm9000_start_xmit(struct sk_buff *skb, struct net_device *dev) spin_unlock_irqrestore(&db->lock, flags); /* free this SKB */ - dev_kfree_skb(skb); + dev_consume_skb_any(skb); return NETDEV_TX_OK; } @@ -1094,7 +1110,6 @@ dm9000_rx(struct net_device *dev) if (rxbyte & DM9000_PKT_ERR) { dev_warn(db->dev, "status check fail: %d\n", rxbyte); iow(db, DM9000_RCR, 0x00); /* Stop Device */ - iow(db, DM9000_ISR, IMR_PAR); /* Stop INT request */ return; } @@ -1194,9 +1209,7 @@ static irqreturn_t dm9000_interrupt(int irq, void *dev_id) /* Save previous register address */ reg_save = readb(db->io_addr); - /* Disable all interrupts */ - iow(db, DM9000_IMR, IMR_PAR); - + dm9000_mask_interrupts(db); /* Got DM9000 interrupt status */ int_status = ior(db, DM9000_ISR); /* Got ISR */ iow(db, DM9000_ISR, int_status); /* Clear ISR status */ @@ -1219,9 +1232,7 @@ static irqreturn_t dm9000_interrupt(int irq, void *dev_id) } } - /* Re-enable interrupt mask */ - iow(db, DM9000_IMR, db->imr_all); - + dm9000_unmask_interrupts(db); /* Restore previous register address */ writeb(reg_save, db->io_addr); @@ -1252,12 +1263,11 @@ static irqreturn_t dm9000_wol_interrupt(int irq, void *dev_id) dev_info(db->dev, "wake by link status change\n"); if (wcr & WCR_SAMPLEST) dev_info(db->dev, "wake by sample packet\n"); - if (wcr & WCR_MAGICST ) + if (wcr & WCR_MAGICST) dev_info(db->dev, "wake by magic packet\n"); if (!(wcr & (WCR_LINKST | WCR_SAMPLEST | WCR_MAGICST))) dev_err(db->dev, "wake signalled with no reason? " "NSR=0x%02x, WSR=0x%02x\n", nsr, wcr); - } spin_unlock_irqrestore(&db->lock, flags); @@ -1294,6 +1304,9 @@ dm9000_open(struct net_device *dev) * may work, and tell the user that this is a problem */ if (irqflags == IRQF_TRIGGER_NONE) + irqflags = irq_get_trigger_type(dev->irq); + + if (irqflags == IRQF_TRIGGER_NONE) dev_warn(db->dev, "WARNING: no IRQ resource flags set.\n"); irqflags |= IRQF_SHARED; @@ -1303,19 +1316,23 @@ dm9000_open(struct net_device *dev) mdelay(1); /* delay needs by DM9000B */ /* Initialize DM9000 board */ - dm9000_reset(db); dm9000_init_dm9000(dev); if (request_irq(dev->irq, dm9000_interrupt, irqflags, dev->name, dev)) return -EAGAIN; + /* Now that we have an interrupt handler hooked up we can unmask + * our interrupts + */ + dm9000_unmask_interrupts(db); /* Init driver variable */ db->dbug_cnt = 0; mii_check_media(&db->mii, netif_msg_link(db), 1); netif_start_queue(dev); - - dm9000_schedule_poll(db); + + /* Poll initial link status */ + schedule_delayed_work(&db->phy_poll, 1); return 0; } @@ -1328,7 +1345,7 @@ dm9000_shutdown(struct net_device *dev) /* RESET device */ dm9000_phy_write(dev, 0, MII_BMCR, BMCR_RESET); /* PHY RESET */ iow(db, DM9000_GPR, 0x01); /* Power-Down PHY */ - iow(db, DM9000_IMR, IMR_PAR); /* Disable all interrupt */ + dm9000_mask_interrupts(db); iow(db, DM9000_RCR, 0x00); /* Disable RX */ } @@ -1549,12 +1566,7 @@ dm9000_probe(struct platform_device *pdev) db->flags |= DM9000_PLATF_SIMPLE_PHY; #endif - /* Fixing bug on dm9000_probe, takeover dm9000_reset(db), - * Need 'NCR_MAC_LBK' bit to indeed stable our DM9000 fifo - * while probe stage. - */ - - iow(db, DM9000_NCR, NCR_MAC_LBK | NCR_RST); + dm9000_reset(db); /* try multiple times, DM9000 sometimes gets the read wrong */ for (i = 0; i < 8; i++) { @@ -1628,7 +1640,7 @@ dm9000_probe(struct platform_device *pdev) if (!is_valid_ether_addr(ndev->dev_addr)) { /* try reading from mac */ - + mac_src = "chip"; for (i = 0; i < 6; i++) ndev->dev_addr[i] = ior(db, i+DM9000_PAR); @@ -1697,8 +1709,8 @@ dm9000_drv_resume(struct device *dev) /* reset if we were not in wake mode to ensure if * the device was powered off it is in a known state */ if (!db->wake_state) { - dm9000_reset(db); dm9000_init_dm9000(ndev); + dm9000_unmask_interrupts(db); } netif_device_attach(ndev); |
