diff options
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h')
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h | 44 |
1 files changed, 28 insertions, 16 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h index c8f10f0e8a0..bd90e50bd8e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h @@ -1,15 +1,15 @@ /* bnx2x_init.h: Broadcom Everest network driver. * Structures and macroes needed during the initialization. * - * Copyright (c) 2007-2012 Broadcom Corporation + * Copyright (c) 2007-2013 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation. * - * Maintained by: Eilon Greenstein <eilong@broadcom.com> + * Maintained by: Ariel Elior <ariel.elior@qlogic.com> * Written by: Eliezer Tamir - * Modified by: Vladislav Zolotarov <vladz@broadcom.com> + * Modified by: Vladislav Zolotarov */ #ifndef BNX2X_INIT_H @@ -640,23 +640,35 @@ static const struct { * [30] MCP Latched ump_tx_parity * [31] MCP Latched scpad_parity */ -#define MISC_AEU_ENABLE_MCP_PRTY_BITS \ +#define MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS \ (AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY | \ AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY | \ - AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY | \ + AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY) + +#define MISC_AEU_ENABLE_MCP_PRTY_BITS \ + (MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS | \ AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY) /* Below registers control the MCP parity attention output. When * MISC_AEU_ENABLE_MCP_PRTY_BITS are set - attentions are * enabled, when cleared - disabled. */ -static const u32 mcp_attn_ctl_regs[] = { - MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0, - MISC_REG_AEU_ENABLE4_NIG_0, - MISC_REG_AEU_ENABLE4_PXP_0, - MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0, - MISC_REG_AEU_ENABLE4_NIG_1, - MISC_REG_AEU_ENABLE4_PXP_1 +static const struct { + u32 addr; + u32 bits; +} mcp_attn_ctl_regs[] = { + { MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0, + MISC_AEU_ENABLE_MCP_PRTY_BITS }, + { MISC_REG_AEU_ENABLE4_NIG_0, + MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS }, + { MISC_REG_AEU_ENABLE4_PXP_0, + MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS }, + { MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0, + MISC_AEU_ENABLE_MCP_PRTY_BITS }, + { MISC_REG_AEU_ENABLE4_NIG_1, + MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS }, + { MISC_REG_AEU_ENABLE4_PXP_1, + MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS } }; static inline void bnx2x_set_mcp_parity(struct bnx2x *bp, u8 enable) @@ -665,14 +677,14 @@ static inline void bnx2x_set_mcp_parity(struct bnx2x *bp, u8 enable) u32 reg_val; for (i = 0; i < ARRAY_SIZE(mcp_attn_ctl_regs); i++) { - reg_val = REG_RD(bp, mcp_attn_ctl_regs[i]); + reg_val = REG_RD(bp, mcp_attn_ctl_regs[i].addr); if (enable) - reg_val |= MISC_AEU_ENABLE_MCP_PRTY_BITS; + reg_val |= mcp_attn_ctl_regs[i].bits; else - reg_val &= ~MISC_AEU_ENABLE_MCP_PRTY_BITS; + reg_val &= ~mcp_attn_ctl_regs[i].bits; - REG_WR(bp, mcp_attn_ctl_regs[i], reg_val); + REG_WR(bp, mcp_attn_ctl_regs[i].addr, reg_val); } } |