aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c')
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c185
1 files changed, 79 insertions, 106 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
index 2612e3c715d..25eddd90f48 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
@@ -6,7 +6,7 @@
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation.
*
- * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Maintained by: Ariel Elior <ariel.elior@qlogic.com>
* Written by: Eliezer Tamir
* Based on code from Michael Chan's bnx2 driver
* UDP CSUM errata workaround by Arik Gendelman
@@ -358,49 +358,48 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
cfg_idx = bnx2x_get_link_cfg_idx(bp);
old_multi_phy_config = bp->link_params.multi_phy_config;
- switch (cmd->port) {
- case PORT_TP:
- if (bp->port.supported[cfg_idx] & SUPPORTED_TP)
- break; /* no port change */
-
- if (!(bp->port.supported[0] & SUPPORTED_TP ||
- bp->port.supported[1] & SUPPORTED_TP)) {
- DP(BNX2X_MSG_ETHTOOL, "Unsupported port type\n");
- return -EINVAL;
- }
- bp->link_params.multi_phy_config &=
- ~PORT_HW_CFG_PHY_SELECTION_MASK;
- if (bp->link_params.multi_phy_config &
- PORT_HW_CFG_PHY_SWAPPED_ENABLED)
- bp->link_params.multi_phy_config |=
- PORT_HW_CFG_PHY_SELECTION_SECOND_PHY;
- else
- bp->link_params.multi_phy_config |=
- PORT_HW_CFG_PHY_SELECTION_FIRST_PHY;
- break;
- case PORT_FIBRE:
- case PORT_DA:
- if (bp->port.supported[cfg_idx] & SUPPORTED_FIBRE)
- break; /* no port change */
-
- if (!(bp->port.supported[0] & SUPPORTED_FIBRE ||
- bp->port.supported[1] & SUPPORTED_FIBRE)) {
+ if (cmd->port != bnx2x_get_port_type(bp)) {
+ switch (cmd->port) {
+ case PORT_TP:
+ if (!(bp->port.supported[0] & SUPPORTED_TP ||
+ bp->port.supported[1] & SUPPORTED_TP)) {
+ DP(BNX2X_MSG_ETHTOOL,
+ "Unsupported port type\n");
+ return -EINVAL;
+ }
+ bp->link_params.multi_phy_config &=
+ ~PORT_HW_CFG_PHY_SELECTION_MASK;
+ if (bp->link_params.multi_phy_config &
+ PORT_HW_CFG_PHY_SWAPPED_ENABLED)
+ bp->link_params.multi_phy_config |=
+ PORT_HW_CFG_PHY_SELECTION_SECOND_PHY;
+ else
+ bp->link_params.multi_phy_config |=
+ PORT_HW_CFG_PHY_SELECTION_FIRST_PHY;
+ break;
+ case PORT_FIBRE:
+ case PORT_DA:
+ case PORT_NONE:
+ if (!(bp->port.supported[0] & SUPPORTED_FIBRE ||
+ bp->port.supported[1] & SUPPORTED_FIBRE)) {
+ DP(BNX2X_MSG_ETHTOOL,
+ "Unsupported port type\n");
+ return -EINVAL;
+ }
+ bp->link_params.multi_phy_config &=
+ ~PORT_HW_CFG_PHY_SELECTION_MASK;
+ if (bp->link_params.multi_phy_config &
+ PORT_HW_CFG_PHY_SWAPPED_ENABLED)
+ bp->link_params.multi_phy_config |=
+ PORT_HW_CFG_PHY_SELECTION_FIRST_PHY;
+ else
+ bp->link_params.multi_phy_config |=
+ PORT_HW_CFG_PHY_SELECTION_SECOND_PHY;
+ break;
+ default:
DP(BNX2X_MSG_ETHTOOL, "Unsupported port type\n");
return -EINVAL;
}
- bp->link_params.multi_phy_config &=
- ~PORT_HW_CFG_PHY_SELECTION_MASK;
- if (bp->link_params.multi_phy_config &
- PORT_HW_CFG_PHY_SWAPPED_ENABLED)
- bp->link_params.multi_phy_config |=
- PORT_HW_CFG_PHY_SELECTION_FIRST_PHY;
- else
- bp->link_params.multi_phy_config |=
- PORT_HW_CFG_PHY_SELECTION_SECOND_PHY;
- break;
- default:
- DP(BNX2X_MSG_ETHTOOL, "Unsupported port type\n");
- return -EINVAL;
}
/* Save new config in case command complete successfully */
new_multi_phy_config = bp->link_params.multi_phy_config;
@@ -639,6 +638,9 @@ static int bnx2x_get_regs_len(struct net_device *dev)
struct bnx2x *bp = netdev_priv(dev);
int regdump_len = 0;
+ if (IS_VF(bp))
+ return 0;
+
regdump_len = __bnx2x_get_regs_len(bp);
regdump_len *= 4;
regdump_len += sizeof(struct dump_header);
@@ -891,17 +893,8 @@ static void bnx2x_get_regs(struct net_device *dev,
* will re-enable parity attentions right after the dump.
*/
- /* Disable parity on path 0 */
- bnx2x_pretend_func(bp, 0);
bnx2x_disable_blocks_parity(bp);
- /* Disable parity on path 1 */
- bnx2x_pretend_func(bp, 1);
- bnx2x_disable_blocks_parity(bp);
-
- /* Return to current function */
- bnx2x_pretend_func(bp, BP_ABS_FUNC(bp));
-
dump_hdr.header_size = (sizeof(struct dump_header) / 4) - 1;
dump_hdr.preset = DUMP_ALL_PRESETS;
dump_hdr.version = BNX2X_DUMP_VERSION;
@@ -928,18 +921,9 @@ static void bnx2x_get_regs(struct net_device *dev,
/* Actually read the registers */
__bnx2x_get_regs(bp, p);
- /* Re-enable parity attentions on path 0 */
- bnx2x_pretend_func(bp, 0);
- bnx2x_clear_blocks_parity(bp);
- bnx2x_enable_blocks_parity(bp);
-
- /* Re-enable parity attentions on path 1 */
- bnx2x_pretend_func(bp, 1);
+ /* Re-enable parity attentions */
bnx2x_clear_blocks_parity(bp);
bnx2x_enable_blocks_parity(bp);
-
- /* Return to current function */
- bnx2x_pretend_func(bp, BP_ABS_FUNC(bp));
}
static int bnx2x_get_preset_regs_len(struct net_device *dev, u32 preset)
@@ -993,17 +977,8 @@ static int bnx2x_get_dump_data(struct net_device *dev,
* will re-enable parity attentions right after the dump.
*/
- /* Disable parity on path 0 */
- bnx2x_pretend_func(bp, 0);
bnx2x_disable_blocks_parity(bp);
- /* Disable parity on path 1 */
- bnx2x_pretend_func(bp, 1);
- bnx2x_disable_blocks_parity(bp);
-
- /* Return to current function */
- bnx2x_pretend_func(bp, BP_ABS_FUNC(bp));
-
dump_hdr.header_size = (sizeof(struct dump_header) / 4) - 1;
dump_hdr.preset = bp->dump_preset_idx;
dump_hdr.version = BNX2X_DUMP_VERSION;
@@ -1032,19 +1007,10 @@ static int bnx2x_get_dump_data(struct net_device *dev,
/* Actually read the registers */
__bnx2x_get_preset_regs(bp, p, dump_hdr.preset);
- /* Re-enable parity attentions on path 0 */
- bnx2x_pretend_func(bp, 0);
- bnx2x_clear_blocks_parity(bp);
- bnx2x_enable_blocks_parity(bp);
-
- /* Re-enable parity attentions on path 1 */
- bnx2x_pretend_func(bp, 1);
+ /* Re-enable parity attentions */
bnx2x_clear_blocks_parity(bp);
bnx2x_enable_blocks_parity(bp);
- /* Return to current function */
- bnx2x_pretend_func(bp, BP_ABS_FUNC(bp));
-
return 0;
}
@@ -1387,9 +1353,9 @@ static bool bnx2x_is_nvm_accessible(struct bnx2x *bp)
u16 pm = 0;
struct net_device *dev = pci_get_drvdata(bp->pdev);
- if (bp->pm_cap)
+ if (bp->pdev->pm_cap)
rc = pci_read_config_word(bp->pdev,
- bp->pm_cap + PCI_PM_CTRL, &pm);
+ bp->pdev->pm_cap + PCI_PM_CTRL, &pm);
if ((rc && !netif_running(dev)) ||
(!rc && ((pm & PCI_PM_CTRL_STATE_MASK) != (__force u16)PCI_D0)))
@@ -1672,6 +1638,12 @@ static int bnx2x_nvram_write(struct bnx2x *bp, u32 offset, u8 *data_buf,
memcpy(&val, data_buf, 4);
+ /* Notice unlike bnx2x_nvram_read_dword() this will not
+ * change val using be32_to_cpu(), which causes data to flip
+ * if the eeprom is read and then written back. This is due
+ * to tools utilizing this functionality that would break
+ * if this would be resolved.
+ */
rc = bnx2x_nvram_write_dword(bp, offset, val, cmd_flags);
/* advance to the next dword */
@@ -2900,9 +2872,16 @@ static void bnx2x_self_test(struct net_device *dev,
memset(buf, 0, sizeof(u64) * BNX2X_NUM_TESTS(bp));
+ if (bnx2x_test_nvram(bp) != 0) {
+ if (!IS_MF(bp))
+ buf[4] = 1;
+ else
+ buf[0] = 1;
+ etest->flags |= ETH_TEST_FL_FAILED;
+ }
+
if (!netif_running(dev)) {
- DP(BNX2X_MSG_ETHTOOL,
- "Can't perform self-test when interface is down\n");
+ DP(BNX2X_MSG_ETHTOOL, "Interface is down\n");
return;
}
@@ -2964,13 +2943,7 @@ static void bnx2x_self_test(struct net_device *dev,
/* wait until link state is restored */
bnx2x_wait_for_link(bp, link_up, is_serdes);
}
- if (bnx2x_test_nvram(bp) != 0) {
- if (!IS_MF(bp))
- buf[4] = 1;
- else
- buf[0] = 1;
- etest->flags |= ETH_TEST_FL_FAILED;
- }
+
if (bnx2x_test_intr(bp) != 0) {
if (!IS_MF(bp))
buf[5] = 1;
@@ -2997,8 +2970,9 @@ static void bnx2x_self_test(struct net_device *dev,
#define IS_PORT_STAT(i) \
((bnx2x_stats_arr[i].flags & STATS_FLAGS_BOTH) == STATS_FLAGS_PORT)
#define IS_FUNC_STAT(i) (bnx2x_stats_arr[i].flags & STATS_FLAGS_FUNC)
-#define IS_MF_MODE_STAT(bp) \
- (IS_MF(bp) && !(bp->msg_enable & BNX2X_MSG_STATS))
+#define HIDE_PORT_STAT(bp) \
+ ((IS_MF(bp) && !(bp->msg_enable & BNX2X_MSG_STATS)) || \
+ IS_VF(bp))
/* ethtool statistics are displayed for all regular ethernet queues and the
* fcoe L2 queue if not disabled
@@ -3020,7 +2994,7 @@ static int bnx2x_get_sset_count(struct net_device *dev, int stringset)
BNX2X_NUM_Q_STATS;
} else
num_strings = 0;
- if (IS_MF_MODE_STAT(bp)) {
+ if (HIDE_PORT_STAT(bp)) {
for (i = 0; i < BNX2X_NUM_STATS; i++)
if (IS_FUNC_STAT(i))
num_strings++;
@@ -3075,7 +3049,7 @@ static void bnx2x_get_strings(struct net_device *dev, u32 stringset, u8 *buf)
}
for (i = 0, j = 0; i < BNX2X_NUM_STATS; i++) {
- if (IS_MF_MODE_STAT(bp) && IS_PORT_STAT(i))
+ if (HIDE_PORT_STAT(bp) && IS_PORT_STAT(i))
continue;
strcpy(buf + (k + j)*ETH_GSTRING_LEN,
bnx2x_stats_arr[i].string);
@@ -3133,7 +3107,7 @@ static void bnx2x_get_ethtool_stats(struct net_device *dev,
hw_stats = (u32 *)&bp->eth_stats;
for (i = 0, j = 0; i < BNX2X_NUM_STATS; i++) {
- if (IS_MF_MODE_STAT(bp) && IS_PORT_STAT(i))
+ if (HIDE_PORT_STAT(bp) && IS_PORT_STAT(i))
continue;
if (bnx2x_stats_arr[i].size == 0) {
/* skip this counter */
@@ -3343,7 +3317,7 @@ static u32 bnx2x_get_rxfh_indir_size(struct net_device *dev)
return T_ETH_INDIRECTION_TABLE_SIZE;
}
-static int bnx2x_get_rxfh_indir(struct net_device *dev, u32 *indir)
+static int bnx2x_get_rxfh(struct net_device *dev, u32 *indir, u8 *key)
{
struct bnx2x *bp = netdev_priv(dev);
u8 ind_table[T_ETH_INDIRECTION_TABLE_SIZE] = {0};
@@ -3367,14 +3341,15 @@ static int bnx2x_get_rxfh_indir(struct net_device *dev, u32 *indir)
return 0;
}
-static int bnx2x_set_rxfh_indir(struct net_device *dev, const u32 *indir)
+static int bnx2x_set_rxfh(struct net_device *dev, const u32 *indir,
+ const u8 *key)
{
struct bnx2x *bp = netdev_priv(dev);
size_t i;
for (i = 0; i < T_ETH_INDIRECTION_TABLE_SIZE; i++) {
/*
- * The same as in bnx2x_get_rxfh_indir: we can't use a memcpy()
+ * The same as in bnx2x_get_rxfh: we can't use a memcpy()
* as an internal storage of an indirection table is a u8 array
* while indir->ring_index points to an array of u32.
*
@@ -3498,8 +3473,8 @@ static const struct ethtool_ops bnx2x_ethtool_ops = {
.get_rxnfc = bnx2x_get_rxnfc,
.set_rxnfc = bnx2x_set_rxnfc,
.get_rxfh_indir_size = bnx2x_get_rxfh_indir_size,
- .get_rxfh_indir = bnx2x_get_rxfh_indir,
- .set_rxfh_indir = bnx2x_set_rxfh_indir,
+ .get_rxfh = bnx2x_get_rxfh,
+ .set_rxfh = bnx2x_set_rxfh,
.get_channels = bnx2x_get_channels,
.set_channels = bnx2x_set_channels,
.get_module_info = bnx2x_get_module_info,
@@ -3525,16 +3500,14 @@ static const struct ethtool_ops bnx2x_vf_ethtool_ops = {
.get_rxnfc = bnx2x_get_rxnfc,
.set_rxnfc = bnx2x_set_rxnfc,
.get_rxfh_indir_size = bnx2x_get_rxfh_indir_size,
- .get_rxfh_indir = bnx2x_get_rxfh_indir,
- .set_rxfh_indir = bnx2x_set_rxfh_indir,
+ .get_rxfh = bnx2x_get_rxfh,
+ .set_rxfh = bnx2x_set_rxfh,
.get_channels = bnx2x_get_channels,
.set_channels = bnx2x_set_channels,
};
void bnx2x_set_ethtool_ops(struct bnx2x *bp, struct net_device *netdev)
{
- if (IS_PF(bp))
- SET_ETHTOOL_OPS(netdev, &bnx2x_ethtool_ops);
- else /* vf */
- SET_ETHTOOL_OPS(netdev, &bnx2x_vf_ethtool_ops);
+ netdev->ethtool_ops = (IS_PF(bp)) ?
+ &bnx2x_ethtool_ops : &bnx2x_vf_ethtool_ops;
}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-04 00:37:17 +0000