diff options
Diffstat (limited to 'drivers/net/ethernet/amd/Kconfig')
| -rw-r--r-- | drivers/net/ethernet/amd/Kconfig | 192 |
1 files changed, 192 insertions, 0 deletions
diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig new file mode 100644 index 00000000000..bbaf36d9f5e --- /dev/null +++ b/drivers/net/ethernet/amd/Kconfig @@ -0,0 +1,192 @@ +# +# AMD network device configuration +# + +config NET_VENDOR_AMD + bool "AMD devices" + default y + depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \ + SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \ + (ARM && ARCH_EBSA110) || ISA || EISA || PCMCIA || ARM64 + ---help--- + If you have a network (Ethernet) chipset belonging to this class, + say Y. + + Note that the answer to this question does not directly affect + the kernel: saying N will just case the configurator to skip all + the questions regarding AMD chipsets. If you say Y, you will be asked + for your specific chipset/driver in the following questions. + +if NET_VENDOR_AMD + +config A2065 + tristate "A2065 support" + depends on ZORRO + select CRC32 + ---help--- + If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise, + say N. + + To compile this driver as a module, choose M here: the module + will be called a2065. + +config AMD8111_ETH + tristate "AMD 8111 (new PCI LANCE) support" + depends on PCI + select CRC32 + select MII + ---help--- + If you have an AMD 8111-based PCI LANCE ethernet card, + answer Y here and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here. The module + will be called amd8111e. + +config LANCE + tristate "AMD LANCE and PCnet (AT1500 and NE2100) support" + depends on ISA && ISA_DMA_API + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. Some LinkSys cards are + of this type. + + To compile this driver as a module, choose M here: the module + will be called lance. This is recommended. + +config PCNET32 + tristate "AMD PCnet32 PCI support" + depends on PCI + select CRC32 + select MII + ---help--- + If you have a PCnet32 or PCnetPCI based network (Ethernet) card, + answer Y here and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here. The module + will be called pcnet32. + +config ARIADNE + tristate "Ariadne support" + depends on ZORRO + ---help--- + If you have a Village Tronic Ariadne Ethernet adapter, say Y. + Otherwise, say N. + + To compile this driver as a module, choose M here: the module + will be called ariadne. + +config ARM_AM79C961A + bool "ARM EBSA110 AM79C961A support" + depends on ARM && ARCH_EBSA110 + select CRC32 + ---help--- + If you wish to compile a kernel for the EBSA-110, then you should + always answer Y to this. + +config ATARILANCE + tristate "Atari LANCE support" + depends on ATARI + ---help--- + Say Y to include support for several Atari Ethernet adapters based + on the AMD LANCE chipset: RieblCard (with or without battery), or + PAMCard VME (also the version by Rhotron, with different addresses). + +config DECLANCE + tristate "DEC LANCE ethernet controller support" + depends on MACH_DECSTATION + select CRC32 + ---help--- + This driver is for the series of Ethernet controllers produced by + DEC (now Compaq) based on the AMD LANCE chipset, including the + DEPCA series. (This chipset is better known via the NE2100 cards.) + +config HPLANCE + bool "HP on-board LANCE support" + depends on DIO + select CRC32 + ---help--- + If you want to use the builtin "LANCE" Ethernet controller on an + HP300 machine, say Y here. + +config MIPS_AU1X00_ENET + tristate "MIPS AU1000 Ethernet support" + depends on MIPS_ALCHEMY + select PHYLIB + select CRC32 + ---help--- + If you have an Alchemy Semi AU1X00 based system + say Y. Otherwise, say N. + +config MVME147_NET + tristate "MVME147 (LANCE) Ethernet support" + depends on MVME147 + select CRC32 + ---help--- + Support for the on-board Ethernet interface on the Motorola MVME147 + single-board computer. Say Y here to include the + driver for this chip in your kernel. + To compile this driver as a module, choose M here. + +config PCMCIA_NMCLAN + tristate "New Media PCMCIA support" + depends on PCMCIA + help + Say Y here if you intend to attach a New Media Ethernet or LiveWire + PCMCIA (PC-card) Ethernet card to your computer. + + To compile this driver as a module, choose M here: the module will be + called nmclan_cs. If unsure, say N. + +config NI65 + tristate "NI6510 support" + depends on ISA && ISA_DMA_API + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here. The module + will be called ni65. + +config SUN3LANCE + tristate "Sun3/Sun3x on-board LANCE support" + depends on (SUN3 || SUN3X) + ---help--- + Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80) + featured an AMD LANCE 10Mbit Ethernet controller on board; say Y + here to compile in the Linux driver for this and enable Ethernet. + General Linux information on the Sun 3 and 3x series (now + discontinued) is at + <http://www.angelfire.com/ca2/tech68k/sun3.html>. + + If you're not building a kernel for a Sun 3, say N. + +config SUNLANCE + tristate "Sun LANCE support" + depends on SBUS + select CRC32 + ---help--- + This driver supports the "le" interface present on all 32-bit Sparc + systems, on some older Ultra systems and as an Sbus option. These + cards are based on the AMD LANCE chipset, which is better known + via the NE2100 cards. + + To compile this driver as a module, choose M here: the module + will be called sunlance. + +config AMD_XGBE + tristate "AMD 10GbE Ethernet driver" + depends on OF_NET + select PHYLIB + select AMD_XGBE_PHY + ---help--- + This driver supports the AMD 10GbE Ethernet device found on an + AMD SoC. + + To compile this driver as a module, choose M here: the module + will be called amd-xgbe. + +endif # NET_VENDOR_AMD |