aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/bnx2x/bnx2x_link.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/bnx2x/bnx2x_link.h')
-rw-r--r--drivers/net/bnx2x/bnx2x_link.h399
1 files changed, 0 insertions, 399 deletions
diff --git a/drivers/net/bnx2x/bnx2x_link.h b/drivers/net/bnx2x/bnx2x_link.h
deleted file mode 100644
index 92f36b6950d..00000000000
--- a/drivers/net/bnx2x/bnx2x_link.h
+++ /dev/null
@@ -1,399 +0,0 @@
-/* Copyright 2008-2011 Broadcom Corporation
- *
- * Unless you and Broadcom execute a separate written software license
- * agreement governing use of this software, this software is licensed to you
- * under the terms of the GNU General Public License version 2, available
- * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
- *
- * Notwithstanding the above, under no circumstances may you combine this
- * software in any way with any other Broadcom software provided under a
- * license other than the GPL, without Broadcom's express prior written
- * consent.
- *
- * Written by Yaniv Rosner
- *
- */
-
-#ifndef BNX2X_LINK_H
-#define BNX2X_LINK_H
-
-
-
-/***********************************************************/
-/* Defines */
-/***********************************************************/
-#define DEFAULT_PHY_DEV_ADDR 3
-#define E2_DEFAULT_PHY_DEV_ADDR 5
-
-
-
-#define BNX2X_FLOW_CTRL_AUTO PORT_FEATURE_FLOW_CONTROL_AUTO
-#define BNX2X_FLOW_CTRL_TX PORT_FEATURE_FLOW_CONTROL_TX
-#define BNX2X_FLOW_CTRL_RX PORT_FEATURE_FLOW_CONTROL_RX
-#define BNX2X_FLOW_CTRL_BOTH PORT_FEATURE_FLOW_CONTROL_BOTH
-#define BNX2X_FLOW_CTRL_NONE PORT_FEATURE_FLOW_CONTROL_NONE
-
-#define SPEED_AUTO_NEG 0
-#define SPEED_12000 12000
-#define SPEED_12500 12500
-#define SPEED_13000 13000
-#define SPEED_15000 15000
-#define SPEED_16000 16000
-
-#define SFP_EEPROM_VENDOR_NAME_ADDR 0x14
-#define SFP_EEPROM_VENDOR_NAME_SIZE 16
-#define SFP_EEPROM_VENDOR_OUI_ADDR 0x25
-#define SFP_EEPROM_VENDOR_OUI_SIZE 3
-#define SFP_EEPROM_PART_NO_ADDR 0x28
-#define SFP_EEPROM_PART_NO_SIZE 16
-#define PWR_FLT_ERR_MSG_LEN 250
-
-#define XGXS_EXT_PHY_TYPE(ext_phy_config) \
- ((ext_phy_config) & PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK)
-#define XGXS_EXT_PHY_ADDR(ext_phy_config) \
- (((ext_phy_config) & PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> \
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT)
-#define SERDES_EXT_PHY_TYPE(ext_phy_config) \
- ((ext_phy_config) & PORT_HW_CFG_SERDES_EXT_PHY_TYPE_MASK)
-
-/* Single Media Direct board is the plain 577xx board with CX4/RJ45 jacks */
-#define SINGLE_MEDIA_DIRECT(params) (params->num_phys == 1)
-/* Single Media board contains single external phy */
-#define SINGLE_MEDIA(params) (params->num_phys == 2)
-/* Dual Media board contains two external phy with different media */
-#define DUAL_MEDIA(params) (params->num_phys == 3)
-#define FW_PARAM_MDIO_CTRL_OFFSET 16
-#define FW_PARAM_SET(phy_addr, phy_type, mdio_access) \
- (phy_addr | phy_type | mdio_access << FW_PARAM_MDIO_CTRL_OFFSET)
-
-#define PFC_BRB_MAC_PAUSE_XOFF_THRESHOLD_PAUSEABLE 170
-#define PFC_BRB_MAC_PAUSE_XOFF_THRESHOLD_NON_PAUSEABLE 0
-
-#define PFC_BRB_MAC_PAUSE_XON_THRESHOLD_PAUSEABLE 250
-#define PFC_BRB_MAC_PAUSE_XON_THRESHOLD_NON_PAUSEABLE 0
-
-#define PFC_BRB_MAC_FULL_XOFF_THRESHOLD_PAUSEABLE 10
-#define PFC_BRB_MAC_FULL_XOFF_THRESHOLD_NON_PAUSEABLE 90
-
-#define PFC_BRB_MAC_FULL_XON_THRESHOLD_PAUSEABLE 50
-#define PFC_BRB_MAC_FULL_XON_THRESHOLD_NON_PAUSEABLE 250
-
-#define PFC_BRB_FULL_LB_XOFF_THRESHOLD 170
-#define PFC_BRB_FULL_LB_XON_THRESHOLD 250
-
-/***********************************************************/
-/* Structs */
-/***********************************************************/
-#define INT_PHY 0
-#define EXT_PHY1 1
-#define EXT_PHY2 2
-#define MAX_PHYS 3
-
-/* Same configuration is shared between the XGXS and the first external phy */
-#define LINK_CONFIG_SIZE (MAX_PHYS - 1)
-#define LINK_CONFIG_IDX(_phy_idx) ((_phy_idx == INT_PHY) ? \
- 0 : (_phy_idx - 1))
-/***********************************************************/
-/* bnx2x_phy struct */
-/* Defines the required arguments and function per phy */
-/***********************************************************/
-struct link_vars;
-struct link_params;
-struct bnx2x_phy;
-
-typedef u8 (*config_init_t)(struct bnx2x_phy *phy, struct link_params *params,
- struct link_vars *vars);
-typedef u8 (*read_status_t)(struct bnx2x_phy *phy, struct link_params *params,
- struct link_vars *vars);
-typedef void (*link_reset_t)(struct bnx2x_phy *phy,
- struct link_params *params);
-typedef void (*config_loopback_t)(struct bnx2x_phy *phy,
- struct link_params *params);
-typedef u8 (*format_fw_ver_t)(u32 raw, u8 *str, u16 *len);
-typedef void (*hw_reset_t)(struct bnx2x_phy *phy, struct link_params *params);
-typedef void (*set_link_led_t)(struct bnx2x_phy *phy,
- struct link_params *params, u8 mode);
-typedef void (*phy_specific_func_t)(struct bnx2x_phy *phy,
- struct link_params *params, u32 action);
-
-struct bnx2x_phy {
- u32 type;
-
- /* Loaded during init */
- u8 addr;
-
- u8 flags;
- /* Require HW lock */
-#define FLAGS_HW_LOCK_REQUIRED (1<<0)
- /* No Over-Current detection */
-#define FLAGS_NOC (1<<1)
- /* Fan failure detection required */
-#define FLAGS_FAN_FAILURE_DET_REQ (1<<2)
- /* Initialize first the XGXS and only then the phy itself */
-#define FLAGS_INIT_XGXS_FIRST (1<<3)
-#define FLAGS_REARM_LATCH_SIGNAL (1<<6)
-#define FLAGS_SFP_NOT_APPROVED (1<<7)
-
- u8 def_md_devad;
- u8 reserved;
- /* preemphasis values for the rx side */
- u16 rx_preemphasis[4];
-
- /* preemphasis values for the tx side */
- u16 tx_preemphasis[4];
-
- /* EMAC address for access MDIO */
- u32 mdio_ctrl;
-
- u32 supported;
-
- u32 media_type;
-#define ETH_PHY_UNSPECIFIED 0x0
-#define ETH_PHY_SFP_FIBER 0x1
-#define ETH_PHY_XFP_FIBER 0x2
-#define ETH_PHY_DA_TWINAX 0x3
-#define ETH_PHY_BASE_T 0x4
-#define ETH_PHY_NOT_PRESENT 0xff
-
- /* The address in which version is located*/
- u32 ver_addr;
-
- u16 req_flow_ctrl;
-
- u16 req_line_speed;
-
- u32 speed_cap_mask;
-
- u16 req_duplex;
- u16 rsrv;
- /* Called per phy/port init, and it configures LASI, speed, autoneg,
- duplex, flow control negotiation, etc. */
- config_init_t config_init;
-
- /* Called due to interrupt. It determines the link, speed */
- read_status_t read_status;
-
- /* Called when driver is unloading. Should reset the phy */
- link_reset_t link_reset;
-
- /* Set the loopback configuration for the phy */
- config_loopback_t config_loopback;
-
- /* Format the given raw number into str up to len */
- format_fw_ver_t format_fw_ver;
-
- /* Reset the phy (both ports) */
- hw_reset_t hw_reset;
-
- /* Set link led mode (on/off/oper)*/
- set_link_led_t set_link_led;
-
- /* PHY Specific tasks */
- phy_specific_func_t phy_specific_func;
-#define DISABLE_TX 1
-#define ENABLE_TX 2
-};
-
-/* Inputs parameters to the CLC */
-struct link_params {
-
- u8 port;
-
- /* Default / User Configuration */
- u8 loopback_mode;
-#define LOOPBACK_NONE 0
-#define LOOPBACK_EMAC 1
-#define LOOPBACK_BMAC 2
-#define LOOPBACK_XGXS 3
-#define LOOPBACK_EXT_PHY 4
-#define LOOPBACK_EXT 5
-#define LOOPBACK_UMAC 6
-#define LOOPBACK_XMAC 7
-
- /* Device parameters */
- u8 mac_addr[6];
-
- u16 req_duplex[LINK_CONFIG_SIZE];
- u16 req_flow_ctrl[LINK_CONFIG_SIZE];
-
- u16 req_line_speed[LINK_CONFIG_SIZE]; /* Also determine AutoNeg */
-
- /* shmem parameters */
- u32 shmem_base;
- u32 shmem2_base;
- u32 speed_cap_mask[LINK_CONFIG_SIZE];
- u32 switch_cfg;
-#define SWITCH_CFG_1G PORT_FEATURE_CON_SWITCH_1G_SWITCH
-#define SWITCH_CFG_10G PORT_FEATURE_CON_SWITCH_10G_SWITCH
-#define SWITCH_CFG_AUTO_DETECT PORT_FEATURE_CON_SWITCH_AUTO_DETECT
-
- u32 lane_config;
-
- /* Phy register parameter */
- u32 chip_id;
-
- /* features */
- u32 feature_config_flags;
-#define FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED (1<<0)
-#define FEATURE_CONFIG_PFC_ENABLED (1<<1)
-#define FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY (1<<2)
-#define FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY (1<<3)
- /* Will be populated during common init */
- struct bnx2x_phy phy[MAX_PHYS];
-
- /* Will be populated during common init */
- u8 num_phys;
-
- u8 rsrv;
- u16 hw_led_mode; /* part of the hw_config read from the shmem */
- u32 multi_phy_config;
-
- /* Device pointer passed to all callback functions */
- struct bnx2x *bp;
- u16 req_fc_auto_adv; /* Should be set to TX / BOTH when
- req_flow_ctrl is set to AUTO */
-};
-
-/* Output parameters */
-struct link_vars {
- u8 phy_flags;
-
- u8 mac_type;
-#define MAC_TYPE_NONE 0
-#define MAC_TYPE_EMAC 1
-#define MAC_TYPE_BMAC 2
-
- u8 phy_link_up; /* internal phy link indication */
- u8 link_up;
-
- u16 line_speed;
- u16 duplex;
-
- u16 flow_ctrl;
- u16 ieee_fc;
-
- /* The same definitions as the shmem parameter */
- u32 link_status;
-};
-
-/***********************************************************/
-/* Functions */
-/***********************************************************/
-u8 bnx2x_phy_init(struct link_params *input, struct link_vars *output);
-
-/* Reset the link. Should be called when driver or interface goes down
- Before calling phy firmware upgrade, the reset_ext_phy should be set
- to 0 */
-u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars,
- u8 reset_ext_phy);
-
-/* bnx2x_link_update should be called upon link interrupt */
-u8 bnx2x_link_update(struct link_params *input, struct link_vars *output);
-
-/* use the following phy functions to read/write from external_phy
- In order to use it to read/write internal phy registers, use
- DEFAULT_PHY_DEV_ADDR as devad, and (_bank + (_addr & 0xf)) as
- the register */
-u8 bnx2x_phy_read(struct link_params *params, u8 phy_addr,
- u8 devad, u16 reg, u16 *ret_val);
-
-u8 bnx2x_phy_write(struct link_params *params, u8 phy_addr,
- u8 devad, u16 reg, u16 val);
-/* Reads the link_status from the shmem,
- and update the link vars accordingly */
-void bnx2x_link_status_update(struct link_params *input,
- struct link_vars *output);
-/* returns string representing the fw_version of the external phy */
-u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
- u8 *version, u16 len);
-
-/* Set/Unset the led
- Basically, the CLC takes care of the led for the link, but in case one needs
- to set/unset the led unnaturally, set the "mode" to LED_MODE_OPER to
- blink the led, and LED_MODE_OFF to set the led off.*/
-u8 bnx2x_set_led(struct link_params *params, struct link_vars *vars,
- u8 mode, u32 speed);
-#define LED_MODE_OFF 0
-#define LED_MODE_ON 1
-#define LED_MODE_OPER 2
-#define LED_MODE_FRONT_PANEL_OFF 3
-
-/* bnx2x_handle_module_detect_int should be called upon module detection
- interrupt */
-void bnx2x_handle_module_detect_int(struct link_params *params);
-
-/* Get the actual link status. In case it returns 0, link is up,
- otherwise link is down*/
-u8 bnx2x_test_link(struct link_params *input, struct link_vars *vars,
- u8 is_serdes);
-
-/* One-time initialization for external phy after power up */
-u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base_path[],
- u32 shmem2_base_path[], u32 chip_id);
-
-/* Reset the external PHY using GPIO */
-void bnx2x_ext_phy_hw_reset(struct bnx2x *bp, u8 port);
-
-/* Reset the external of SFX7101 */
-void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, struct bnx2x_phy *phy);
-
-/* Read "byte_cnt" bytes from address "addr" from the SFP+ EEPROM */
-u8 bnx2x_read_sfp_module_eeprom(struct bnx2x_phy *phy,
- struct link_params *params, u16 addr,
- u8 byte_cnt, u8 *o_buf);
-
-void bnx2x_hw_reset_phy(struct link_params *params);
-
-/* Checks if HW lock is required for this phy/board type */
-u8 bnx2x_hw_lock_required(struct bnx2x *bp, u32 shmem_base,
- u32 shmem2_base);
-
-/* Check swap bit and adjust PHY order */
-u32 bnx2x_phy_selection(struct link_params *params);
-
-/* Probe the phys on board, and populate them in "params" */
-u8 bnx2x_phy_probe(struct link_params *params);
-/* Checks if fan failure detection is required on one of the phys on board */
-u8 bnx2x_fan_failure_det_req(struct bnx2x *bp, u32 shmem_base,
- u32 shmem2_base, u8 port);
-
-/* PFC port configuration params */
-struct bnx2x_nig_brb_pfc_port_params {
- /* NIG */
- u32 pause_enable;
- u32 llfc_out_en;
- u32 llfc_enable;
- u32 pkt_priority_to_cos;
- u32 rx_cos0_priority_mask;
- u32 rx_cos1_priority_mask;
- u32 llfc_high_priority_classes;
- u32 llfc_low_priority_classes;
- /* BRB */
- u32 cos0_pauseable;
- u32 cos1_pauseable;
-};
-
-/**
- * Used to update the PFC attributes in EMAC, BMAC, NIG and BRB
- * when link is already up
- */
-void bnx2x_update_pfc(struct link_params *params,
- struct link_vars *vars,
- struct bnx2x_nig_brb_pfc_port_params *pfc_params);
-
-
-/* Used to configure the ETS to disable */
-void bnx2x_ets_disabled(struct link_params *params);
-
-/* Used to configure the ETS to BW limited */
-void bnx2x_ets_bw_limit(const struct link_params *params, const u32 cos0_bw,
- const u32 cos1_bw);
-
-/* Used to configure the ETS to strict */
-u8 bnx2x_ets_strict(const struct link_params *params, const u8 strict_cos);
-
-/* Read pfc statistic*/
-void bnx2x_pfc_statistic(struct link_params *params, struct link_vars *vars,
- u32 pfc_frames_sent[2],
- u32 pfc_frames_received[2]);
-#endif /* BNX2X_LINK_H */
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-15 20:26:46 +0000