250 files changed, 49214 insertions, 31164 deletions

diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index f8210bf2d24..94b821042d9 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -1,6 +1,6 @@
 menuconfig MTD
 	tristate "Memory Technology Device (MTD) support"
-	depends on HAS_IOMEM
+	depends on GENERIC_IO
 	help
 	  Memory Technology Devices are flash, RAM and similar chips, often
 	  used for solid state file systems on embedded devices. This option
@@ -12,50 +12,19 @@ menuconfig MTD
 
 if MTD
 
-config MTD_DEBUG
-	bool "Debugging"
-	help
-	  This turns on low-level debugging for the entire MTD sub-system.
-	  Normally, you should say 'N'.
-
-config MTD_DEBUG_VERBOSE
-	int "Debugging verbosity (0 = quiet, 3 = noisy)"
-	depends on MTD_DEBUG
-	default "0"
-	help
-	  Determines the verbosity level of the MTD debugging messages.
-
 config MTD_TESTS
-	tristate "MTD tests support"
+	tristate "MTD tests support (DANGEROUS)"
 	depends on m
 	help
 	  This option includes various MTD tests into compilation. The tests
 	  should normally be compiled as kernel modules. The modules perform
 	  various checks and verifications when loaded.
 
-config MTD_CONCAT
-	tristate "MTD concatenating support"
-	help
-	  Support for concatenating several MTD devices into a single
-	  (virtual) one. This allows you to have -for example- a JFFS(2)
-	  file system spanning multiple physical flash chips. If unsure,
-	  say 'Y'.
-
-config MTD_PARTITIONS
-	bool "MTD partitioning support"
-	help
-	  If you have a device which needs to divide its flash chip(s) up
-	  into multiple 'partitions', each of which appears to the user as
-	  a separate MTD device, you require this option to be enabled. If
-	  unsure, say 'Y'.
-
-	  Note, however, that you don't need this option for the DiskOnChip
-	  devices. Partitioning on NFTL 'devices' is a different - that's the
-	  'normal' form of partitioning used on a block device.
+	  WARNING: some of the tests will ERASE entire MTD device which they
+	  test. Do not use these tests unless you really know what you do.
 
 config MTD_REDBOOT_PARTS
 	tristate "RedBoot partition table parsing"
-	depends on MTD_PARTITIONS
 	---help---
 	  RedBoot is a ROM monitor and bootloader which deals with multiple
 	  'images' in flash devices by putting a table one of the erase
@@ -72,9 +41,10 @@ config MTD_REDBOOT_PARTS
 	  SA1100 map driver (CONFIG_MTD_SA1100) has an option for this, for
 	  example.
 
+if MTD_REDBOOT_PARTS
+
 config MTD_REDBOOT_DIRECTORY_BLOCK
 	int "Location of RedBoot partition table"
-	depends on MTD_REDBOOT_PARTS
 	default "-1"
 	---help---
 	  This option is the Linux counterpart to the
@@ -91,21 +61,21 @@ config MTD_REDBOOT_DIRECTORY_BLOCK
 
 config MTD_REDBOOT_PARTS_UNALLOCATED
 	bool "Include unallocated flash regions"
-	depends on MTD_REDBOOT_PARTS
 	help
 	  If you need to register each unallocated flash region as a MTD
 	  'partition', enable this option.
 
 config MTD_REDBOOT_PARTS_READONLY
 	bool "Force read-only for RedBoot system images"
-	depends on MTD_REDBOOT_PARTS
 	help
 	  If you need to force read-only for 'RedBoot', 'RedBoot Config' and
 	  'FIS directory' images, enable this option.
 
+endif # MTD_REDBOOT_PARTS
+
 config MTD_CMDLINE_PARTS
-	bool "Command line partition table parsing"
-	depends on MTD_PARTITIONS = "y" && MTD = "y"
+	tristate "Command line partition table parsing"
+	depends on MTD
 	---help---
 	  Allow generic configuration of the MTD partition tables via the kernel
 	  command line. Multiple flash resources are supported for hardware where
@@ -142,7 +112,7 @@ config MTD_CMDLINE_PARTS
 
 config MTD_AFS_PARTS
 	tristate "ARM Firmware Suite partition parsing"
-	depends on ARM && MTD_PARTITIONS
+	depends on ARM
 	---help---
 	  The ARM Firmware Suite allows the user to divide flash devices into
 	  multiple 'images'. Each such image has a header containing its name
@@ -154,42 +124,44 @@ config MTD_AFS_PARTS
 
 	  You will still need the parsing functions to be called by the driver
 	  for your particular device. It won't happen automatically. The
-	  'armflash' map driver (CONFIG_MTD_ARM_INTEGRATOR) does this, for
-	  example.
+	  'physmap' map driver (CONFIG_MTD_PHYSMAP) does this, for example.
 
 config MTD_OF_PARTS
-	tristate "Flash partition map based on OF description"
-	depends on (MICROBLAZE || PPC_OF) && MTD_PARTITIONS
+	tristate "OpenFirmware partitioning information support"
+	default y
+	depends on OF
 	help
 	  This provides a partition parsing function which derives
 	  the partition map from the children of the flash node,
-	  as described in Documentation/powerpc/booting-without-of.txt.
+	  as described in Documentation/devicetree/booting-without-of.txt.
 
 config MTD_AR7_PARTS
 	tristate "TI AR7 partitioning support"
-	depends on MTD_PARTITIONS
 	---help---
 	  TI AR7 partitioning support
 
-comment "User Modules And Translation Layers"
-
-config MTD_CHAR
-	tristate "Direct char device access to MTD devices"
+config MTD_BCM63XX_PARTS
+	tristate "BCM63XX CFE partitioning support"
+	depends on BCM63XX
+	select CRC32
 	help
-	  This provides a character device for each MTD device present in
-	  the system, allowing the user to read and write directly to the
-	  memory chips, and also use ioctl() to obtain information about
-	  the device, or to erase parts of it.
+	  This provides partions parsing for BCM63xx devices with CFE
+	  bootloaders.
 
-config HAVE_MTD_OTP
-	bool
+config MTD_BCM47XX_PARTS
+	tristate "BCM47XX partitioning support"
+	depends on BCM47XX || ARCH_BCM_5301X
 	help
-	  Enable access to OTP regions using MTD_CHAR.
+	  This provides partitions parser for devices based on BCM47xx
+	  boards.
 
+comment "User Modules And Translation Layers"
+
+#
+# MTD block device support is select'ed if needed
+#
 config MTD_BLKDEVS
-	tristate "Common interface to block layer for MTD 'translation layers'"
-	depends on BLOCK
-	default n
+	tristate
 
 config MTD_BLOCK
 	tristate "Caching block device access to MTD devices"
@@ -307,26 +279,35 @@ config SSFDC
 
 config SM_FTL
 	tristate "SmartMedia/xD new translation layer"
-	depends on EXPERIMENTAL && BLOCK
+	depends on BLOCK
 	select MTD_BLKDEVS
 	select MTD_NAND_ECC
 	help
-	  This enables new and very EXPERMENTAL support for SmartMedia/xD
+	  This enables EXPERIMENTAL R/W support for SmartMedia/xD
 	  FTL (Flash translation layer).
-	  Write support isn't yet well tested, therefore this code IS likely to
-	  eat your card, so please don't use it together with valuable data.
-	  Use readonly driver (CONFIG_SSFDC) instead.
+	  Write support is only lightly tested, therefore this driver
+	  isn't recommended to use with valuable data (anyway if you have
+	  valuable data, do backups regardless of software/hardware you
+	  use, because you never know what will eat your data...)
+	  If you only need R/O access, you can use older R/O driver
+	  (CONFIG_SSFDC)
 
 config MTD_OOPS
 	tristate "Log panic/oops to an MTD buffer"
-	depends on MTD
 	help
 	  This enables panic and oops messages to be logged to a circular
 	  buffer in a flash partition where it can be read back at some
 	  later point.
 
-	  To use, add console=ttyMTDx to the kernel command line,
-	  where x is the MTD device number to use.
+config MTD_SWAP
+	tristate "Swap on MTD device support"
+	depends on MTD && SWAP
+	select MTD_BLKDEVS
+	help
+	  Provides volatile block device driver on top of mtd partition
+          suitable for swapping.  The mapping of written blocks is not saved.
+	  The driver provides wear leveling by storing erase counter into the
+	  OOB.
 
 source "drivers/mtd/chips/Kconfig"
 
@@ -340,6 +321,8 @@ source "drivers/mtd/onenand/Kconfig"
 
 source "drivers/mtd/lpddr/Kconfig"
 
+source "drivers/mtd/spi-nor/Kconfig"
+
 source "drivers/mtd/ubi/Kconfig"
 
 endif # MTD
diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
index 760abc53339..99bb9a1f6e1 100644
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -4,18 +4,17 @@
 
 # Core functionality.
 obj-$(CONFIG_MTD)		+= mtd.o
-mtd-y				:= mtdcore.o mtdsuper.o
-mtd-$(CONFIG_MTD_PARTITIONS)	+= mtdpart.o
+mtd-y				:= mtdcore.o mtdsuper.o mtdconcat.o mtdpart.o mtdchar.o
 
-obj-$(CONFIG_MTD_CONCAT)	+= mtdconcat.o
+obj-$(CONFIG_MTD_OF_PARTS)	+= ofpart.o
 obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
 obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
 obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
 obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
-obj-$(CONFIG_MTD_OF_PARTS)      += ofpart.o
+obj-$(CONFIG_MTD_BCM63XX_PARTS)	+= bcm63xxpart.o
+obj-$(CONFIG_MTD_BCM47XX_PARTS)	+= bcm47xxpart.o
 
 # 'Users' - code which presents functionality to userspace.
-obj-$(CONFIG_MTD_CHAR)		+= mtdchar.o
 obj-$(CONFIG_MTD_BLKDEVS)	+= mtd_blkdevs.o
 obj-$(CONFIG_MTD_BLOCK)		+= mtdblock.o
 obj-$(CONFIG_MTD_BLOCK_RO)	+= mtdblock_ro.o
@@ -26,10 +25,12 @@ obj-$(CONFIG_RFD_FTL)		+= rfd_ftl.o
 obj-$(CONFIG_SSFDC)		+= ssfdc.o
 obj-$(CONFIG_SM_FTL)		+= sm_ftl.o
 obj-$(CONFIG_MTD_OOPS)		+= mtdoops.o
+obj-$(CONFIG_MTD_SWAP)		+= mtdswap.o
 
 nftl-objs		:= nftlcore.o nftlmount.o
 inftl-objs		:= inftlcore.o inftlmount.o
 
 obj-y		+= chips/ lpddr/ maps/ devices/ nand/ onenand/ tests/
 
+obj-$(CONFIG_MTD_SPI_NOR)	+= spi-nor/
 obj-$(CONFIG_MTD_UBI)		+= ubi/
diff --git a/drivers/mtd/afs.c b/drivers/mtd/afs.c
index cec7ab98b2a..96a33e3f7b0 100644
--- a/drivers/mtd/afs.c
+++ b/drivers/mtd/afs.c
@@ -2,7 +2,7 @@
 
     drivers/mtd/afs.c: ARM Flash Layout/Partitioning
 
-    Copyright (C) 2000 ARM Limited
+    Copyright © 2000 ARM Limited
 
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
@@ -75,7 +75,7 @@ afs_read_footer(struct mtd_info *mtd, u_int *img_start, u_int *iis_start,
 	size_t sz;
 	int ret;
 
-	ret = mtd->read(mtd, ptr, sizeof(fs), &sz, (u_char *) &fs);
+	ret = mtd_read(mtd, ptr, sizeof(fs), &sz, (u_char *)&fs);
 	if (ret >= 0 && sz != sizeof(fs))
 		ret = -EINVAL;
 
@@ -132,7 +132,7 @@ afs_read_iis(struct mtd_info *mtd, struct image_info_struct *iis, u_int ptr)
 	int ret, i;
 
 	memset(iis, 0, sizeof(*iis));
-	ret = mtd->read(mtd, ptr, sizeof(*iis), &sz, (u_char *) iis);
+	ret = mtd_read(mtd, ptr, sizeof(*iis), &sz, (u_char *)iis);
 	if (ret < 0)
 		goto failed;
 
@@ -162,8 +162,8 @@ afs_read_iis(struct mtd_info *mtd, struct image_info_struct *iis, u_int ptr)
 }
 
 static int parse_afs_partitions(struct mtd_info *mtd,
-                         struct mtd_partition **pparts,
-                         unsigned long origin)
+				struct mtd_partition **pparts,
+				struct mtd_part_parser_data *data)
 {
 	struct mtd_partition *parts;
 	u_int mask, off, idx, sz;
@@ -264,7 +264,8 @@ static struct mtd_part_parser afs_parser = {
 
 static int __init afs_parser_init(void)
 {
-	return register_mtd_parser(&afs_parser);
+	register_mtd_parser(&afs_parser);
+	return 0;
 }
 
 static void __exit afs_parser_exit(void)
diff --git a/drivers/mtd/ar7part.c b/drivers/mtd/ar7part.c
index 6697a1ec72d..7c9172ad262 100644
--- a/drivers/mtd/ar7part.c
+++ b/drivers/mtd/ar7part.c
@@ -26,7 +26,9 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/bootmem.h>
-#include <linux/magic.h>
+#include <linux/module.h>
+
+#include <uapi/linux/magic.h>
 
 #define AR7_PARTS	4
 #define ROOT_OFFSET	0xe0000
@@ -34,10 +36,6 @@
 #define LOADER_MAGIC1	le32_to_cpu(0xfeedfa42)
 #define LOADER_MAGIC2	le32_to_cpu(0xfeed1281)
 
-#ifndef SQUASHFS_MAGIC
-#define SQUASHFS_MAGIC	0x73717368
-#endif
-
 struct ar7_bin_rec {
 	unsigned int checksum;
 	unsigned int length;
@@ -46,7 +44,7 @@ struct ar7_bin_rec {
 
 static int create_mtd_partitions(struct mtd_info *master,
 				 struct mtd_partition **pparts,
-				 unsigned long origin)
+				 struct mtd_part_parser_data *data)
 {
 	struct ar7_bin_rec header;
 	unsigned int offset;
@@ -72,8 +70,8 @@ static int create_mtd_partitions(struct mtd_info *master,
 
 	do { /* Try 10 blocks starting from master->erasesize */
 		offset = pre_size;
-		master->read(master, offset,
-			     sizeof(header), &len, (uint8_t *)&header);
+		mtd_read(master, offset, sizeof(header), &len,
+			 (uint8_t *)&header);
 		if (!strncmp((char *)&header, "TIENV0.8", 8))
 			ar7_parts[1].offset = pre_size;
 		if (header.checksum == LOADER_MAGIC1)
@@ -94,16 +92,16 @@ static int create_mtd_partitions(struct mtd_info *master,
 	case LOADER_MAGIC1:
 		while (header.length) {
 			offset += sizeof(header) + header.length;
-			master->read(master, offset, sizeof(header),
-				     &len, (uint8_t *)&header);
+			mtd_read(master, offset, sizeof(header), &len,
+				 (uint8_t *)&header);
 		}
 		root_offset = offset + sizeof(header) + 4;
 		break;
 	case LOADER_MAGIC2:
 		while (header.length) {
 			offset += sizeof(header) + header.length;
-			master->read(master, offset, sizeof(header),
-				     &len, (uint8_t *)&header);
+			mtd_read(master, offset, sizeof(header), &len,
+				 (uint8_t *)&header);
 		}
 		root_offset = offset + sizeof(header) + 4 + 0xff;
 		root_offset &= ~(uint32_t)0xff;
@@ -113,8 +111,7 @@ static int create_mtd_partitions(struct mtd_info *master,
 		break;
 	}
 
-	master->read(master, root_offset,
-		sizeof(header), &len, (u8 *)&header);
+	mtd_read(master, root_offset, sizeof(header), &len, (u8 *)&header);
 	if (header.checksum != SQUASHFS_MAGIC) {
 		root_offset += master->erasesize - 1;
 		root_offset &= ~(master->erasesize - 1);
@@ -142,10 +139,17 @@ static struct mtd_part_parser ar7_parser = {
 
 static int __init ar7_parser_init(void)
 {
-	return register_mtd_parser(&ar7_parser);
+	register_mtd_parser(&ar7_parser);
+	return 0;
+}
+
+static void __exit ar7_parser_exit(void)
+{
+	deregister_mtd_parser(&ar7_parser);
 }
 
 module_init(ar7_parser_init);
+module_exit(ar7_parser_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR(	"Felix Fietkau <nbd@openwrt.org>, "
diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c
new file mode 100644
index 00000000000..adfa74c1bc4
--- /dev/null
+++ b/drivers/mtd/bcm47xxpart.c
@@ -0,0 +1,282 @@
+/*
+ * BCM47XX MTD partitioning
+ *
+ * Copyright © 2012 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+/* 10 parts were found on sflash on Netgear WNDR4500 */
+#define BCM47XXPART_MAX_PARTS		12
+
+/*
+ * Amount of bytes we read when analyzing each block of flash memory.
+ * Set it big enough to allow detecting partition and reading important data.
+ */
+#define BCM47XXPART_BYTES_TO_READ	0x4e8
+
+/* Magics */
+#define BOARD_DATA_MAGIC		0x5246504D	/* MPFR */
+#define BOARD_DATA_MAGIC2		0xBD0D0BBD
+#define CFE_MAGIC			0x43464531	/* 1EFC */
+#define FACTORY_MAGIC			0x59544346	/* FCTY */
+#define NVRAM_HEADER			0x48534C46	/* FLSH */
+#define POT_MAGIC1			0x54544f50	/* POTT */
+#define POT_MAGIC2			0x504f		/* OP */
+#define ML_MAGIC1			0x39685a42
+#define ML_MAGIC2			0x26594131
+#define TRX_MAGIC			0x30524448
+#define SQSH_MAGIC			0x71736873	/* shsq */
+
+struct trx_header {
+	uint32_t magic;
+	uint32_t length;
+	uint32_t crc32;
+	uint16_t flags;
+	uint16_t version;
+	uint32_t offset[3];
+} __packed;
+
+static void bcm47xxpart_add_part(struct mtd_partition *part, char *name,
+				 u64 offset, uint32_t mask_flags)
+{
+	part->name = name;
+	part->offset = offset;
+	part->mask_flags = mask_flags;
+}
+
+static int bcm47xxpart_parse(struct mtd_info *master,
+			     struct mtd_partition **pparts,
+			     struct mtd_part_parser_data *data)
+{
+	struct mtd_partition *parts;
+	uint8_t i, curr_part = 0;
+	uint32_t *buf;
+	size_t bytes_read;
+	uint32_t offset;
+	uint32_t blocksize = master->erasesize;
+	struct trx_header *trx;
+	int trx_part = -1;
+	int last_trx_part = -1;
+	int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, };
+
+	if (blocksize <= 0x10000)
+		blocksize = 0x10000;
+
+	/* Alloc */
+	parts = kzalloc(sizeof(struct mtd_partition) * BCM47XXPART_MAX_PARTS,
+			GFP_KERNEL);
+	if (!parts)
+		return -ENOMEM;
+
+	buf = kzalloc(BCM47XXPART_BYTES_TO_READ, GFP_KERNEL);
+	if (!buf) {
+		kfree(parts);
+		return -ENOMEM;
+	}
+
+	/* Parse block by block looking for magics */
+	for (offset = 0; offset <= master->size - blocksize;
+	     offset += blocksize) {
+		/* Nothing more in higher memory */
+		if (offset >= 0x2000000)
+			break;
+
+		if (curr_part >= BCM47XXPART_MAX_PARTS) {
+			pr_warn("Reached maximum number of partitions, scanning stopped!\n");
+			break;
+		}
+
+		/* Read beginning of the block */
+		if (mtd_read(master, offset, BCM47XXPART_BYTES_TO_READ,
+			     &bytes_read, (uint8_t *)buf) < 0) {
+			pr_err("mtd_read error while parsing (offset: 0x%X)!\n",
+			       offset);
+			continue;
+		}
+
+		/* Magic or small NVRAM at 0x400 */
+		if ((buf[0x4e0 / 4] == CFE_MAGIC && buf[0x4e4 / 4] == CFE_MAGIC) ||
+		    (buf[0x400 / 4] == NVRAM_HEADER)) {
+			bcm47xxpart_add_part(&parts[curr_part++], "boot",
+					     offset, MTD_WRITEABLE);
+			continue;
+		}
+
+		/*
+		 * board_data starts with board_id which differs across boards,
+		 * but we can use 'MPFR' (hopefully) magic at 0x100
+		 */
+		if (buf[0x100 / 4] == BOARD_DATA_MAGIC) {
+			bcm47xxpart_add_part(&parts[curr_part++], "board_data",
+					     offset, MTD_WRITEABLE);
+			continue;
+		}
+
+		/* Found on Huawei E970 */
+		if (buf[0x000 / 4] == FACTORY_MAGIC) {
+			bcm47xxpart_add_part(&parts[curr_part++], "factory",
+					     offset, MTD_WRITEABLE);
+			continue;
+		}
+
+		/* POT(TOP) */
+		if (buf[0x000 / 4] == POT_MAGIC1 &&
+		    (buf[0x004 / 4] & 0xFFFF) == POT_MAGIC2) {
+			bcm47xxpart_add_part(&parts[curr_part++], "POT", offset,
+					     MTD_WRITEABLE);
+			continue;
+		}
+
+		/* ML */
+		if (buf[0x010 / 4] == ML_MAGIC1 &&
+		    buf[0x014 / 4] == ML_MAGIC2) {
+			bcm47xxpart_add_part(&parts[curr_part++], "ML", offset,
+					     MTD_WRITEABLE);
+			continue;
+		}
+
+		/* TRX */
+		if (buf[0x000 / 4] == TRX_MAGIC) {
+			if (BCM47XXPART_MAX_PARTS - curr_part < 4) {
+				pr_warn("Not enough partitions left to register trx, scanning stopped!\n");
+				break;
+			}
+
+			trx = (struct trx_header *)buf;
+
+			trx_part = curr_part;
+			bcm47xxpart_add_part(&parts[curr_part++], "firmware",
+					     offset, 0);
+
+			i = 0;
+			/* We have LZMA loader if offset[2] points to sth */
+			if (trx->offset[2]) {
+				bcm47xxpart_add_part(&parts[curr_part++],
+						     "loader",
+						     offset + trx->offset[i],
+						     0);
+				i++;
+			}
+
+			bcm47xxpart_add_part(&parts[curr_part++], "linux",
+					     offset + trx->offset[i], 0);
+			i++;
+
+			/*
+			 * Pure rootfs size is known and can be calculated as:
+			 * trx->length - trx->offset[i]. We don't fill it as
+			 * we want to have jffs2 (overlay) in the same mtd.
+			 */
+			bcm47xxpart_add_part(&parts[curr_part++], "rootfs",
+					     offset + trx->offset[i], 0);
+			i++;
+
+			last_trx_part = curr_part - 1;
+
+			/*
+			 * We have whole TRX scanned, skip to the next part. Use
+			 * roundown (not roundup), as the loop will increase
+			 * offset in next step.
+			 */
+			offset = rounddown(offset + trx->length, blocksize);
+			continue;
+		}
+
+		/* Squashfs on devices not using TRX */
+		if (buf[0x000 / 4] == SQSH_MAGIC) {
+			bcm47xxpart_add_part(&parts[curr_part++], "rootfs",
+					     offset, 0);
+			continue;
+		}
+
+		/* Read middle of the block */
+		if (mtd_read(master, offset + 0x8000, 0x4,
+			     &bytes_read, (uint8_t *)buf) < 0) {
+			pr_err("mtd_read error while parsing (offset: 0x%X)!\n",
+			       offset);
+			continue;
+		}
+
+		/* Some devices (ex. WNDR3700v3) don't have a standard 'MPFR' */
+		if (buf[0x000 / 4] == BOARD_DATA_MAGIC2) {
+			bcm47xxpart_add_part(&parts[curr_part++], "board_data",
+					     offset, MTD_WRITEABLE);
+			continue;
+		}
+	}
+
+	/* Look for NVRAM at the end of the last block. */
+	for (i = 0; i < ARRAY_SIZE(possible_nvram_sizes); i++) {
+		if (curr_part >= BCM47XXPART_MAX_PARTS) {
+			pr_warn("Reached maximum number of partitions, scanning stopped!\n");
+			break;
+		}
+
+		offset = master->size - possible_nvram_sizes[i];
+		if (mtd_read(master, offset, 0x4, &bytes_read,
+			     (uint8_t *)buf) < 0) {
+			pr_err("mtd_read error while reading at offset 0x%X!\n",
+			       offset);
+			continue;
+		}
+
+		/* Standard NVRAM */
+		if (buf[0] == NVRAM_HEADER) {
+			bcm47xxpart_add_part(&parts[curr_part++], "nvram",
+					     master->size - blocksize, 0);
+			break;
+		}
+	}
+
+	kfree(buf);
+
+	/*
+	 * Assume that partitions end at the beginning of the one they are
+	 * followed by.
+	 */
+	for (i = 0; i < curr_part; i++) {
+		u64 next_part_offset = (i < curr_part - 1) ?
+				       parts[i + 1].offset : master->size;
+
+		parts[i].size = next_part_offset - parts[i].offset;
+		if (i == last_trx_part && trx_part >= 0)
+			parts[trx_part].size = next_part_offset -
+					       parts[trx_part].offset;
+	}
+
+	*pparts = parts;
+	return curr_part;
+};
+
+static struct mtd_part_parser bcm47xxpart_mtd_parser = {
+	.owner = THIS_MODULE,
+	.parse_fn = bcm47xxpart_parse,
+	.name = "bcm47xxpart",
+};
+
+static int __init bcm47xxpart_init(void)
+{
+	register_mtd_parser(&bcm47xxpart_mtd_parser);
+	return 0;
+}
+
+static void __exit bcm47xxpart_exit(void)
+{
+	deregister_mtd_parser(&bcm47xxpart_mtd_parser);
+}
+
+module_init(bcm47xxpart_init);
+module_exit(bcm47xxpart_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MTD partitioning for BCM47XX flash memories");
diff --git a/drivers/mtd/bcm63xxpart.c b/drivers/mtd/bcm63xxpart.c
new file mode 100644
index 00000000000..b2443f7031c
--- /dev/null
+++ b/drivers/mtd/bcm63xxpart.c
@@ -0,0 +1,241 @@
+/*
+ * BCM63XX CFE image tag parser
+ *
+ * Copyright © 2006-2008  Florian Fainelli <florian@openwrt.org>
+ *			  Mike Albon <malbon@openwrt.org>
+ * Copyright © 2009-2010  Daniel Dickinson <openwrt@cshore.neomailbox.net>
+ * Copyright © 2011-2013  Jonas Gorski <jonas.gorski@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/crc32.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sizes.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-bcm63xx/bcm63xx_nvram.h>
+#include <asm/mach-bcm63xx/bcm963xx_tag.h>
+#include <asm/mach-bcm63xx/board_bcm963xx.h>
+
+#define BCM63XX_EXTENDED_SIZE	0xBFC00000	/* Extended flash address */
+
+#define BCM63XX_CFE_BLOCK_SIZE	SZ_64K		/* always at least 64KiB */
+
+#define BCM63XX_CFE_MAGIC_OFFSET 0x4e0
+
+static int bcm63xx_detect_cfe(struct mtd_info *master)
+{
+	char buf[9];
+	int ret;
+	size_t retlen;
+
+	ret = mtd_read(master, BCM963XX_CFE_VERSION_OFFSET, 5, &retlen,
+		       (void *)buf);
+	buf[retlen] = 0;
+
+	if (ret)
+		return ret;
+
+	if (strncmp("cfe-v", buf, 5) == 0)
+		return 0;
+
+	/* very old CFE's do not have the cfe-v string, so check for magic */
+	ret = mtd_read(master, BCM63XX_CFE_MAGIC_OFFSET, 8, &retlen,
+		       (void *)buf);
+	buf[retlen] = 0;
+
+	return strncmp("CFE1CFE1", buf, 8);
+}
+
+static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
+					struct mtd_partition **pparts,
+					struct mtd_part_parser_data *data)
+{
+	/* CFE, NVRAM and global Linux are always present */
+	int nrparts = 3, curpart = 0;
+	struct bcm_tag *buf;
+	struct mtd_partition *parts;
+	int ret;
+	size_t retlen;
+	unsigned int rootfsaddr, kerneladdr, spareaddr;
+	unsigned int rootfslen, kernellen, sparelen, totallen;
+	unsigned int cfelen, nvramlen;
+	unsigned int cfe_erasesize;
+	int i;
+	u32 computed_crc;
+	bool rootfs_first = false;
+
+	if (bcm63xx_detect_cfe(master))
+		return -EINVAL;
+
+	cfe_erasesize = max_t(uint32_t, master->erasesize,
+			      BCM63XX_CFE_BLOCK_SIZE);
+
+	cfelen = cfe_erasesize;
+	nvramlen = bcm63xx_nvram_get_psi_size() * SZ_1K;
+	nvramlen = roundup(nvramlen, cfe_erasesize);
+
+	/* Allocate memory for buffer */
+	buf = vmalloc(sizeof(struct bcm_tag));
+	if (!buf)
+		return -ENOMEM;
+
+	/* Get the tag */
+	ret = mtd_read(master, cfelen, sizeof(struct bcm_tag), &retlen,
+		       (void *)buf);
+
+	if (retlen != sizeof(struct bcm_tag)) {
+		vfree(buf);
+		return -EIO;
+	}
+
+	computed_crc = crc32_le(IMAGETAG_CRC_START, (u8 *)buf,
+				offsetof(struct bcm_tag, header_crc));
+	if (computed_crc == buf->header_crc) {
+		char *boardid = &(buf->board_id[0]);
+		char *tagversion = &(buf->tag_version[0]);
+
+		sscanf(buf->flash_image_start, "%u", &rootfsaddr);
+		sscanf(buf->kernel_address, "%u", &kerneladdr);
+		sscanf(buf->kernel_length, "%u", &kernellen);
+		sscanf(buf->total_length, "%u", &totallen);
+
+		pr_info("CFE boot tag found with version %s and board type %s\n",
+			tagversion, boardid);
+
+		kerneladdr = kerneladdr - BCM63XX_EXTENDED_SIZE;
+		rootfsaddr = rootfsaddr - BCM63XX_EXTENDED_SIZE;
+		spareaddr = roundup(totallen, master->erasesize) + cfelen;
+
+		if (rootfsaddr < kerneladdr) {
+			/* default Broadcom layout */
+			rootfslen = kerneladdr - rootfsaddr;
+			rootfs_first = true;
+		} else {
+			/* OpenWrt layout */
+			rootfsaddr = kerneladdr + kernellen;
+			rootfslen = spareaddr - rootfsaddr;
+		}
+	} else {
+		pr_warn("CFE boot tag CRC invalid (expected %08x, actual %08x)\n",
+			buf->header_crc, computed_crc);
+		kernellen = 0;
+		rootfslen = 0;
+		rootfsaddr = 0;
+		spareaddr = cfelen;
+	}
+	sparelen = master->size - spareaddr - nvramlen;
+
+	/* Determine number of partitions */
+	if (rootfslen > 0)
+		nrparts++;
+
+	if (kernellen > 0)
+		nrparts++;
+
+	/* Ask kernel for more memory */
+	parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL);
+	if (!parts) {
+		vfree(buf);
+		return -ENOMEM;
+	}
+
+	/* Start building partition list */
+	parts[curpart].name = "CFE";
+	parts[curpart].offset = 0;
+	parts[curpart].size = cfelen;
+	curpart++;
+
+	if (kernellen > 0) {
+		int kernelpart = curpart;
+
+		if (rootfslen > 0 && rootfs_first)
+			kernelpart++;
+		parts[kernelpart].name = "kernel";
+		parts[kernelpart].offset = kerneladdr;
+		parts[kernelpart].size = kernellen;
+		curpart++;
+	}
+
+	if (rootfslen > 0) {
+		int rootfspart = curpart;
+
+		if (kernellen > 0 && rootfs_first)
+			rootfspart--;
+		parts[rootfspart].name = "rootfs";
+		parts[rootfspart].offset = rootfsaddr;
+		parts[rootfspart].size = rootfslen;
+		if (sparelen > 0  && !rootfs_first)
+			parts[rootfspart].size += sparelen;
+		curpart++;
+	}
+
+	parts[curpart].name = "nvram";
+	parts[curpart].offset = master->size - nvramlen;
+	parts[curpart].size = nvramlen;
+	curpart++;
+
+	/* Global partition "linux" to make easy firmware upgrade */
+	parts[curpart].name = "linux";
+	parts[curpart].offset = cfelen;
+	parts[curpart].size = master->size - cfelen - nvramlen;
+
+	for (i = 0; i < nrparts; i++)
+		pr_info("Partition %d is %s offset %llx and length %llx\n", i,
+			parts[i].name, parts[i].offset,	parts[i].size);
+
+	pr_info("Spare partition is offset %x and length %x\n",	spareaddr,
+		sparelen);
+
+	*pparts = parts;
+	vfree(buf);
+
+	return nrparts;
+};
+
+static struct mtd_part_parser bcm63xx_cfe_parser = {
+	.owner = THIS_MODULE,
+	.parse_fn = bcm63xx_parse_cfe_partitions,
+	.name = "bcm63xxpart",
+};
+
+static int __init bcm63xx_cfe_parser_init(void)
+{
+	register_mtd_parser(&bcm63xx_cfe_parser);
+	return 0;
+}
+
+static void __exit bcm63xx_cfe_parser_exit(void)
+{
+	deregister_mtd_parser(&bcm63xx_cfe_parser);
+}
+
+module_init(bcm63xx_cfe_parser_init);
+module_exit(bcm63xx_cfe_parser_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Daniel Dickinson <openwrt@cshore.neomailbox.net>");
+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
+MODULE_AUTHOR("Mike Albon <malbon@openwrt.org>");
+MODULE_AUTHOR("Jonas Gorski <jonas.gorski@gmail.com");
+MODULE_DESCRIPTION("MTD partitioning for BCM63XX CFE bootloaders");
diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
index 35c6a23b183..9f02c28c020 100644
--- a/drivers/mtd/chips/Kconfig
+++ b/drivers/mtd/chips/Kconfig
@@ -19,7 +19,7 @@ config MTD_JEDECPROBE
 	help
 	  This option enables JEDEC-style probing of flash chips which are not
 	  compatible with the Common Flash Interface, but will use the common
-	  CFI-targetted flash drivers for any chips which are identified which
+	  CFI-targeted flash drivers for any chips which are identified which
 	  are in fact compatible in all but the probe method. This actually
 	  covers most AMD/Fujitsu-compatible chips and also non-CFI
 	  Intel chips.
@@ -43,9 +43,6 @@ choice
 	prompt "Flash cmd/query data swapping"
 	depends on MTD_CFI_ADV_OPTIONS
 	default MTD_CFI_NOSWAP
-
-config MTD_CFI_NOSWAP
-	bool "NO"
 	---help---
 	  This option defines the way in which the CPU attempts to arrange
 	  data bits when writing the 'magic' commands to the chips. Saying
@@ -55,12 +52,8 @@ config MTD_CFI_NOSWAP
 	  Specific arrangements are possible with the BIG_ENDIAN_BYTE and
 	  LITTLE_ENDIAN_BYTE, if the bytes are reversed.
 
-	  If you have a LART, on which the data (and address) lines were
-	  connected in a fashion which ensured that the nets were as short
-	  as possible, resulting in a bit-shuffling which seems utterly
-	  random to the untrained eye, you need the LART_ENDIAN_BYTE option.
-
-	  Yes, there really exists something sicker than PDP-endian :)
+config MTD_CFI_NOSWAP
+	bool "NO"
 
 config MTD_CFI_BE_BYTE_SWAP
 	bool "BIG_ENDIAN_BYTE"
@@ -153,7 +146,6 @@ config MTD_CFI_I8
 config MTD_OTP
 	bool "Protection Registers aka one-time programmable (OTP) bits"
 	depends on MTD_CFI_ADV_OPTIONS
-	select HAVE_MTD_OTP
 	default n
 	help
 	  This enables support for reading, writing and locking so called
@@ -177,33 +169,33 @@ config MTD_OTP
 	  in the programming of OTP bits will waste them.
 
 config MTD_CFI_INTELEXT
-	tristate "Support for Intel/Sharp flash chips"
+	tristate "Support for CFI command set 0001 (Intel/Sharp chips)"
 	depends on MTD_GEN_PROBE
 	select MTD_CFI_UTIL
 	help
 	  The Common Flash Interface defines a number of different command
 	  sets which a CFI-compliant chip may claim to implement. This code
-	  provides support for one of those command sets, used on Intel
-	  StrataFlash and other parts.
+	  provides support for command set 0001, used on Intel StrataFlash
+	  and other parts.
 
 config MTD_CFI_AMDSTD
-	tristate "Support for AMD/Fujitsu/Spansion flash chips"
+	tristate "Support for CFI command set 0002 (AMD/Fujitsu/Spansion chips)"
 	depends on MTD_GEN_PROBE
 	select MTD_CFI_UTIL
 	help
 	  The Common Flash Interface defines a number of different command
 	  sets which a CFI-compliant chip may claim to implement. This code
-	  provides support for one of those command sets, used on chips
-	  including the AMD Am29LV320.
+	  provides support for command set 0002, used on chips including
+	  the AMD Am29LV320.
 
 config MTD_CFI_STAA
-	tristate "Support for ST (Advanced Architecture) flash chips"
+	tristate "Support for CFI command set 0020 (ST (Advanced Architecture) chips)"
 	depends on MTD_GEN_PROBE
 	select MTD_CFI_UTIL
 	help
 	  The Common Flash Interface defines a number of different command
 	  sets which a CFI-compliant chip may claim to implement. This code
-	  provides support for one of those command sets.
+	  provides support for command set 0020.
 
 config MTD_CFI_UTIL
 	tristate
@@ -232,7 +224,7 @@ config MTD_ABSENT
 
 config MTD_XIP
 	bool "XIP aware MTD support"
-	depends on !SMP && (MTD_CFI_INTELEXT || MTD_CFI_AMDSTD) && EXPERIMENTAL && ARCH_MTD_XIP
+	depends on !SMP && (MTD_CFI_INTELEXT || MTD_CFI_AMDSTD) && ARCH_MTD_XIP
 	default y if XIP_KERNEL
 	help
 	  This allows MTD support to work with flash memory which is also
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index 62f3ea9de84..a7543ba3e19 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -21,7 +21,6 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
-#include <linux/init.h>
 #include <asm/io.h>
 #include <asm/byteorder.h>
 
@@ -34,7 +33,6 @@
 #include <linux/mtd/xip.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/mtd.h>
-#include <linux/mtd/compatmac.h>
 #include <linux/mtd/cfi.h>
 
 /* #define CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE */
@@ -54,6 +52,11 @@
 /* Atmel chips */
 #define AT49BV640D	0x02de
 #define AT49BV640DT	0x02db
+/* Sharp chips */
+#define LH28F640BFHE_PTTL90	0x00b0
+#define LH28F640BFHE_PBTL90	0x00b1
+#define LH28F640BFHE_PTTL70A	0x00b2
+#define LH28F640BFHE_PBTL70A	0x00b3
 
 static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
 static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
@@ -63,15 +66,17 @@ static int cfi_intelext_erase_varsize(struct mtd_info *, struct erase_info *);
 static void cfi_intelext_sync (struct mtd_info *);
 static int cfi_intelext_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
 static int cfi_intelext_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+static int cfi_intelext_is_locked(struct mtd_info *mtd, loff_t ofs,
+				  uint64_t len);
 #ifdef CONFIG_MTD_OTP
 static int cfi_intelext_read_fact_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
 static int cfi_intelext_read_user_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
 static int cfi_intelext_write_user_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
 static int cfi_intelext_lock_user_prot_reg (struct mtd_info *, loff_t, size_t);
-static int cfi_intelext_get_fact_prot_info (struct mtd_info *,
-					    struct otp_info *, size_t);
-static int cfi_intelext_get_user_prot_info (struct mtd_info *,
-					    struct otp_info *, size_t);
+static int cfi_intelext_get_fact_prot_info(struct mtd_info *, size_t,
+					   size_t *, struct otp_info *);
+static int cfi_intelext_get_user_prot_info(struct mtd_info *, size_t,
+					   size_t *, struct otp_info *);
 #endif
 static int cfi_intelext_suspend (struct mtd_info *);
 static void cfi_intelext_resume (struct mtd_info *);
@@ -86,7 +91,7 @@ static int cfi_intelext_partition_fixup(struct mtd_info *, struct cfi_private **
 
 static int cfi_intelext_point (struct mtd_info *mtd, loff_t from, size_t len,
 		     size_t *retlen, void **virt, resource_size_t *phys);
-static void cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len);
+static int cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len);
 
 static int chip_ready (struct map_info *map, struct flchip *chip, unsigned long adr, int mode);
 static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr, int mode);
@@ -161,7 +166,7 @@ static void cfi_tell_features(struct cfi_pri_intelext *extp)
 #endif
 
 /* Atmel chips don't use the same PRI format as Intel chips */
-static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
+static void fixup_convert_atmel_pri(struct mtd_info *mtd)
 {
 	struct map_info *map = mtd->priv;
 	struct cfi_private *cfi = map->fldrv_priv;
@@ -201,7 +206,7 @@ static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
 	cfi->cfiq->BufWriteTimeoutMax = 0;
 }
 
-static void fixup_at49bv640dx_lock(struct mtd_info *mtd, void *param)
+static void fixup_at49bv640dx_lock(struct mtd_info *mtd)
 {
 	struct map_info *map = mtd->priv;
 	struct cfi_private *cfi = map->fldrv_priv;
@@ -213,7 +218,7 @@ static void fixup_at49bv640dx_lock(struct mtd_info *mtd, void *param)
 
 #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
 /* Some Intel Strata Flash prior to FPO revision C has bugs in this area */
-static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
+static void fixup_intel_strataflash(struct mtd_info *mtd)
 {
 	struct map_info *map = mtd->priv;
 	struct cfi_private *cfi = map->fldrv_priv;
@@ -226,7 +231,7 @@ static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
 #endif
 
 #ifdef CMDSET0001_DISABLE_WRITE_SUSPEND
-static void fixup_no_write_suspend(struct mtd_info *mtd, void* param)
+static void fixup_no_write_suspend(struct mtd_info *mtd)
 {
 	struct map_info *map = mtd->priv;
 	struct cfi_private *cfi = map->fldrv_priv;
@@ -239,7 +244,7 @@ static void fixup_no_write_suspend(struct mtd_info *mtd, void* param)
 }
 #endif
 
-static void fixup_st_m28w320ct(struct mtd_info *mtd, void* param)
+static void fixup_st_m28w320ct(struct mtd_info *mtd)
 {
 	struct map_info *map = mtd->priv;
 	struct cfi_private *cfi = map->fldrv_priv;
@@ -248,7 +253,7 @@ static void fixup_st_m28w320ct(struct mtd_info *mtd, void* param)
 	cfi->cfiq->BufWriteTimeoutMax = 0;	/* Not supported */
 }
 
-static void fixup_st_m28w320cb(struct mtd_info *mtd, void* param)
+static void fixup_st_m28w320cb(struct mtd_info *mtd)
 {
 	struct map_info *map = mtd->priv;
 	struct cfi_private *cfi = map->fldrv_priv;
@@ -258,30 +263,60 @@ static void fixup_st_m28w320cb(struct mtd_info *mtd, void* param)
 		(cfi->cfiq->EraseRegionInfo[1] & 0xffff0000) | 0x3e;
 };
 
-static void fixup_use_point(struct mtd_info *mtd, void *param)
+static int is_LH28F640BF(struct cfi_private *cfi)
+{
+	/* Sharp LH28F640BF Family */
+	if (cfi->mfr == CFI_MFR_SHARP && (
+	    cfi->id == LH28F640BFHE_PTTL90 || cfi->id == LH28F640BFHE_PBTL90 ||
+	    cfi->id == LH28F640BFHE_PTTL70A || cfi->id == LH28F640BFHE_PBTL70A))
+		return 1;
+	return 0;
+}
+
+static void fixup_LH28F640BF(struct mtd_info *mtd)
 {
 	struct map_info *map = mtd->priv;
-	if (!mtd->point && map_is_linear(map)) {
-		mtd->point   = cfi_intelext_point;
-		mtd->unpoint = cfi_intelext_unpoint;
+	struct cfi_private *cfi = map->fldrv_priv;
+	struct cfi_pri_intelext *extp = cfi->cmdset_priv;
+
+	/* Reset the Partition Configuration Register on LH28F640BF
+	 * to a single partition (PCR = 0x000): PCR is embedded into A0-A15. */
+	if (is_LH28F640BF(cfi)) {
+		printk(KERN_INFO "Reset Partition Config. Register: 1 Partition of 4 planes\n");
+		map_write(map, CMD(0x60), 0);
+		map_write(map, CMD(0x04), 0);
+
+		/* We have set one single partition thus
+		 * Simultaneous Operations are not allowed */
+		printk(KERN_INFO "cfi_cmdset_0001: Simultaneous Operations disabled\n");
+		extp->FeatureSupport &= ~512;
 	}
 }
 
-static void fixup_use_write_buffers(struct mtd_info *mtd, void *param)
+static void fixup_use_point(struct mtd_info *mtd)
+{
+	struct map_info *map = mtd->priv;
+	if (!mtd->_point && map_is_linear(map)) {
+		mtd->_point   = cfi_intelext_point;
+		mtd->_unpoint = cfi_intelext_unpoint;
+	}
+}
+
+static void fixup_use_write_buffers(struct mtd_info *mtd)
 {
 	struct map_info *map = mtd->priv;
 	struct cfi_private *cfi = map->fldrv_priv;
 	if (cfi->cfiq->BufWriteTimeoutTyp) {
 		printk(KERN_INFO "Using buffer write method\n" );
-		mtd->write = cfi_intelext_write_buffers;
-		mtd->writev = cfi_intelext_writev;
+		mtd->_write = cfi_intelext_write_buffers;
+		mtd->_writev = cfi_intelext_writev;
 	}
 }
 
 /*
  * Some chips power-up with all sectors locked by default.
  */
-static void fixup_unlock_powerup_lock(struct mtd_info *mtd, void *param)
+static void fixup_unlock_powerup_lock(struct mtd_info *mtd)
 {
 	struct map_info *map = mtd->priv;
 	struct cfi_private *cfi = map->fldrv_priv;
@@ -294,31 +329,33 @@ static void fixup_unlock_powerup_lock(struct mtd_info *mtd, void *param)
 }
 
 static struct cfi_fixup cfi_fixup_table[] = {
-	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
-	{ CFI_MFR_ATMEL, AT49BV640D, fixup_at49bv640dx_lock, NULL },
-	{ CFI_MFR_ATMEL, AT49BV640DT, fixup_at49bv640dx_lock, NULL },
+	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri },
+	{ CFI_MFR_ATMEL, AT49BV640D, fixup_at49bv640dx_lock },
+	{ CFI_MFR_ATMEL, AT49BV640DT, fixup_at49bv640dx_lock },
 #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
-	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash, NULL },
+	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash },
 #endif
 #ifdef CMDSET0001_DISABLE_WRITE_SUSPEND
-	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_no_write_suspend, NULL },
+	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_no_write_suspend },
 #endif
 #if !FORCE_WORD_WRITE
-	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL },
+	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers },
 #endif
-	{ CFI_MFR_ST, 0x00ba, /* M28W320CT */ fixup_st_m28w320ct, NULL },
-	{ CFI_MFR_ST, 0x00bb, /* M28W320CB */ fixup_st_m28w320cb, NULL },
-	{ CFI_MFR_INTEL, CFI_ID_ANY, fixup_unlock_powerup_lock, NULL, },
-	{ 0, 0, NULL, NULL }
+	{ CFI_MFR_ST, 0x00ba, /* M28W320CT */ fixup_st_m28w320ct },
+	{ CFI_MFR_ST, 0x00bb, /* M28W320CB */ fixup_st_m28w320cb },
+	{ CFI_MFR_INTEL, CFI_ID_ANY, fixup_unlock_powerup_lock },
+	{ CFI_MFR_SHARP, CFI_ID_ANY, fixup_unlock_powerup_lock },
+	{ CFI_MFR_SHARP, CFI_ID_ANY, fixup_LH28F640BF },
+	{ 0, 0, NULL }
 };
 
 static struct cfi_fixup jedec_fixup_table[] = {
-	{ CFI_MFR_INTEL, I82802AB,   fixup_use_fwh_lock, NULL, },
-	{ CFI_MFR_INTEL, I82802AC,   fixup_use_fwh_lock, NULL, },
-	{ CFI_MFR_ST,    M50LPW080,  fixup_use_fwh_lock, NULL, },
-	{ CFI_MFR_ST,    M50FLW080A, fixup_use_fwh_lock, NULL, },
-	{ CFI_MFR_ST,    M50FLW080B, fixup_use_fwh_lock, NULL, },
-	{ 0, 0, NULL, NULL }
+	{ CFI_MFR_INTEL, I82802AB,   fixup_use_fwh_lock },
+	{ CFI_MFR_INTEL, I82802AC,   fixup_use_fwh_lock },
+	{ CFI_MFR_ST,    M50LPW080,  fixup_use_fwh_lock },
+	{ CFI_MFR_ST,    M50FLW080A, fixup_use_fwh_lock },
+	{ CFI_MFR_ST,    M50FLW080B, fixup_use_fwh_lock },
+	{ 0, 0, NULL }
 };
 static struct cfi_fixup fixup_table[] = {
 	/* The CFI vendor ids and the JEDEC vendor IDs appear
@@ -326,8 +363,8 @@ static struct cfi_fixup fixup_table[] = {
 	 * well.  This table is to pick all cases where
 	 * we know that is the case.
 	 */
-	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_point, NULL },
-	{ 0, 0, NULL, NULL }
+	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_point },
+	{ 0, 0, NULL }
 };
 
 static void cfi_fixup_major_minor(struct cfi_private *cfi,
@@ -434,25 +471,25 @@ struct mtd_info *cfi_cmdset_0001(struct map_info *map, int primary)
 	int i;
 
 	mtd = kzalloc(sizeof(*mtd), GFP_KERNEL);
-	if (!mtd) {
-		printk(KERN_ERR "Failed to allocate memory for MTD device\n");
+	if (!mtd)
 		return NULL;
-	}
 	mtd->priv = map;
 	mtd->type = MTD_NORFLASH;
 
 	/* Fill in the default mtd operations */
-	mtd->erase   = cfi_intelext_erase_varsize;
-	mtd->read    = cfi_intelext_read;
-	mtd->write   = cfi_intelext_write_words;
-	mtd->sync    = cfi_intelext_sync;
-	mtd->lock    = cfi_intelext_lock;
-	mtd->unlock  = cfi_intelext_unlock;
-	mtd->suspend = cfi_intelext_suspend;
-	mtd->resume  = cfi_intelext_resume;
+	mtd->_erase   = cfi_intelext_erase_varsize;
+	mtd->_read    = cfi_intelext_read;
+	mtd->_write   = cfi_intelext_write_words;
+	mtd->_sync    = cfi_intelext_sync;
+	mtd->_lock    = cfi_intelext_lock;
+	mtd->_unlock  = cfi_intelext_unlock;
+	mtd->_is_locked = cfi_intelext_is_locked;
+	mtd->_suspend = cfi_intelext_suspend;
+	mtd->_resume  = cfi_intelext_resume;
 	mtd->flags   = MTD_CAP_NORFLASH;
 	mtd->name    = map->name;
 	mtd->writesize = 1;
+	mtd->writebufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize;
 
 	mtd->reboot_notifier.notifier_call = cfi_intelext_reboot;
 
@@ -561,10 +598,8 @@ static struct mtd_info *cfi_intelext_setup(struct mtd_info *mtd)
 	mtd->numeraseregions = cfi->cfiq->NumEraseRegions * cfi->numchips;
 	mtd->eraseregions = kmalloc(sizeof(struct mtd_erase_region_info)
 			* mtd->numeraseregions, GFP_KERNEL);
-	if (!mtd->eraseregions) {
-		printk(KERN_ERR "Failed to allocate memory for MTD erase region info\n");
+	if (!mtd->eraseregions)
 		goto setup_err;
-	}
 
 	for (i=0; i<cfi->cfiq->NumEraseRegions; i++) {
 		unsigned long ernum, ersize;
@@ -597,12 +632,12 @@ static struct mtd_info *cfi_intelext_setup(struct mtd_info *mtd)
 	}
 
 #ifdef CONFIG_MTD_OTP
-	mtd->read_fact_prot_reg = cfi_intelext_read_fact_prot_reg;
-	mtd->read_user_prot_reg = cfi_intelext_read_user_prot_reg;
-	mtd->write_user_prot_reg = cfi_intelext_write_user_prot_reg;
-	mtd->lock_user_prot_reg = cfi_intelext_lock_user_prot_reg;
-	mtd->get_fact_prot_info = cfi_intelext_get_fact_prot_info;
-	mtd->get_user_prot_info = cfi_intelext_get_user_prot_info;
+	mtd->_read_fact_prot_reg = cfi_intelext_read_fact_prot_reg;
+	mtd->_read_user_prot_reg = cfi_intelext_read_user_prot_reg;
+	mtd->_write_user_prot_reg = cfi_intelext_write_user_prot_reg;
+	mtd->_lock_user_prot_reg = cfi_intelext_lock_user_prot_reg;
+	mtd->_get_fact_prot_info = cfi_intelext_get_fact_prot_info;
+	mtd->_get_user_prot_info = cfi_intelext_get_user_prot_info;
 #endif
 
 	/* This function has the potential to distort the reality
@@ -717,7 +752,7 @@ static int cfi_intelext_partition_fixup(struct mtd_info *mtd,
 		chip = &newcfi->chips[0];
 		for (i = 0; i < cfi->numchips; i++) {
 			shared[i].writing = shared[i].erasing = NULL;
-			spin_lock_init(&shared[i].lock);
+			mutex_init(&shared[i].lock);
 			for (j = 0; j < numparts; j++) {
 				*chip = cfi->chips[i];
 				chip->start += j << partshift;
@@ -809,12 +844,9 @@ static int chip_ready (struct map_info *map, struct flchip *chip, unsigned long
 			        break;
 
 			if (time_after(jiffies, timeo)) {
-				/* Urgh. Resume and pretend we weren't here.  */
-				map_write(map, CMD(0xd0), adr);
-				/* Make sure we're in 'read status' mode if it had finished */
-				map_write(map, CMD(0x70), adr);
-				chip->state = FL_ERASING;
-				chip->oldstate = FL_READY;
+				/* Urgh. Resume and pretend we weren't here.
+				 * Make sure we're in 'read status' mode if it had finished */
+				put_chip(map, chip, adr);
 				printk(KERN_ERR "%s: Chip not ready after erase "
 				       "suspended: status = 0x%lx\n", map->name, status.x[0]);
 				return -EIO;
@@ -886,7 +918,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
 		 */
 		struct flchip_shared *shared = chip->priv;
 		struct flchip *contender;
-		spin_lock(&shared->lock);
+		mutex_lock(&shared->lock);
 		contender = shared->writing;
 		if (contender && contender != chip) {
 			/*
@@ -899,7 +931,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
 			 * get_chip returns success we're clear to go ahead.
 			 */
 			ret = mutex_trylock(&contender->mutex);
-			spin_unlock(&shared->lock);
+			mutex_unlock(&shared->lock);
 			if (!ret)
 				goto retry;
 			mutex_unlock(&chip->mutex);
@@ -914,7 +946,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
 				mutex_unlock(&contender->mutex);
 				return ret;
 			}
-			spin_lock(&shared->lock);
+			mutex_lock(&shared->lock);
 
 			/* We should not own chip if it is already
 			 * in FL_SYNCING state. Put contender and retry. */
@@ -930,7 +962,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
 		 * on this chip. Sleep. */
 		if (mode == FL_ERASING && shared->erasing
 		    && shared->erasing->oldstate == FL_ERASING) {
-			spin_unlock(&shared->lock);
+			mutex_unlock(&shared->lock);
 			set_current_state(TASK_UNINTERRUPTIBLE);
 			add_wait_queue(&chip->wq, &wait);
 			mutex_unlock(&chip->mutex);
@@ -944,7 +976,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
 		shared->writing = chip;
 		if (mode == FL_ERASING)
 			shared->erasing = chip;
-		spin_unlock(&shared->lock);
+		mutex_unlock(&shared->lock);
 	}
 	ret = chip_ready(map, chip, adr, mode);
 	if (ret == -EAGAIN)
@@ -959,7 +991,7 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad
 
 	if (chip->priv) {
 		struct flchip_shared *shared = chip->priv;
-		spin_lock(&shared->lock);
+		mutex_lock(&shared->lock);
 		if (shared->writing == chip && chip->oldstate == FL_READY) {
 			/* We own the ability to write, but we're done */
 			shared->writing = shared->erasing;
@@ -967,7 +999,7 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad
 				/* give back ownership to who we loaned it from */
 				struct flchip *loaner = shared->writing;
 				mutex_lock(&loaner->mutex);
-				spin_unlock(&shared->lock);
+				mutex_unlock(&shared->lock);
 				mutex_unlock(&chip->mutex);
 				put_chip(map, loaner, loaner->start);
 				mutex_lock(&chip->mutex);
@@ -985,16 +1017,15 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad
 			 * Don't let the switch below mess things up since
 			 * we don't have ownership to resume anything.
 			 */
-			spin_unlock(&shared->lock);
+			mutex_unlock(&shared->lock);
 			wake_up(&chip->wq);
 			return;
 		}
-		spin_unlock(&shared->lock);
+		mutex_unlock(&shared->lock);
 	}
 
 	switch(chip->oldstate) {
 	case FL_ERASING:
-		chip->state = chip->oldstate;
 		/* What if one interleaved chip has finished and the
 		   other hasn't? The old code would leave the finished
 		   one in READY mode. That's bad, and caused -EROFS
@@ -1018,8 +1049,6 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad
 	case FL_READY:
 	case FL_STATUS:
 	case FL_JEDEC_QUERY:
-		/* We should really make set_vpp() count, rather than doing this */
-		DISABLE_VPP(map);
 		break;
 	default:
 		printk(KERN_ERR "%s: put_chip() called with oldstate %d!!\n", map->name, chip->oldstate);
@@ -1227,10 +1256,32 @@ static int inval_cache_and_wait_for_operation(
 	sleep_time = chip_op_time / 2;
 
 	for (;;) {
+		if (chip->state != chip_state) {
+			/* Someone's suspended the operation: sleep */
+			DECLARE_WAITQUEUE(wait, current);
+			set_current_state(TASK_UNINTERRUPTIBLE);
+			add_wait_queue(&chip->wq, &wait);
+			mutex_unlock(&chip->mutex);
+			schedule();
+			remove_wait_queue(&chip->wq, &wait);
+			mutex_lock(&chip->mutex);
+			continue;
+		}
+
 		status = map_read(map, cmd_adr);
 		if (map_word_andequal(map, status, status_OK, status_OK))
 			break;
 
+		if (chip->erase_suspended && chip_state == FL_ERASING)  {
+			/* Erase suspend occurred while sleep: reset timeout */
+			timeo = reset_timeo;
+			chip->erase_suspended = 0;
+		}
+		if (chip->write_suspended && chip_state == FL_WRITING)  {
+			/* Write suspend occurred while sleep: reset timeout */
+			timeo = reset_timeo;
+			chip->write_suspended = 0;
+		}
 		if (!timeo) {
 			map_write(map, CMD(0x70), cmd_adr);
 			chip->state = FL_STATUS;
@@ -1254,27 +1305,6 @@ static int inval_cache_and_wait_for_operation(
 			timeo--;
 		}
 		mutex_lock(&chip->mutex);
-
-		while (chip->state != chip_state) {
-			/* Someone's suspended the operation: sleep */
-			DECLARE_WAITQUEUE(wait, current);
-			set_current_state(TASK_UNINTERRUPTIBLE);
-			add_wait_queue(&chip->wq, &wait);
-			mutex_unlock(&chip->mutex);
-			schedule();
-			remove_wait_queue(&chip->wq, &wait);
-			mutex_lock(&chip->mutex);
-		}
-		if (chip->erase_suspended && chip_state == FL_ERASING)  {
-			/* Erase suspend occured while sleep: reset timeout */
-			timeo = reset_timeo;
-			chip->erase_suspended = 0;
-		}
-		if (chip->write_suspended && chip_state == FL_WRITING)  {
-			/* Write suspend occured while sleep: reset timeout */
-			timeo = reset_timeo;
-			chip->write_suspended = 0;
-		}
 	}
 
 	/* Done and happy. */
@@ -1324,7 +1354,7 @@ static int cfi_intelext_point(struct mtd_info *mtd, loff_t from, size_t len,
 	int chipnum;
 	int ret = 0;
 
-	if (!map->virt || (from + len > mtd->size))
+	if (!map->virt)
 		return -EINVAL;
 
 	/* Now lock the chip(s) to POINT state */
@@ -1334,7 +1364,6 @@ static int cfi_intelext_point(struct mtd_info *mtd, loff_t from, size_t len,
 	ofs = from - (chipnum << cfi->chipshift);
 
 	*virt = map->virt + cfi->chips[chipnum].start + ofs;
-	*retlen = 0;
 	if (phys)
 		*phys = map->phys + cfi->chips[chipnum].start + ofs;
 
@@ -1369,12 +1398,12 @@ static int cfi_intelext_point(struct mtd_info *mtd, loff_t from, size_t len,
 	return 0;
 }
 
-static void cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
+static int cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 {
 	struct map_info *map = mtd->priv;
 	struct cfi_private *cfi = map->fldrv_priv;
 	unsigned long ofs;
-	int chipnum;
+	int chipnum, err = 0;
 
 	/* Now unlock the chip(s) POINT state */
 
@@ -1382,7 +1411,7 @@ static void cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 	chipnum = (from >> cfi->chipshift);
 	ofs = from - (chipnum <<  cfi->chipshift);
 
-	while (len) {
+	while (len && !err) {
 		unsigned long thislen;
 		struct flchip *chip;
 
@@ -1400,8 +1429,10 @@ static void cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 			chip->ref_point_counter--;
 			if(chip->ref_point_counter == 0)
 				chip->state = FL_READY;
-		} else
-			printk(KERN_ERR "%s: Warning: unpoint called on non pointed region\n", map->name); /* Should this give an error? */
+		} else {
+			printk(KERN_ERR "%s: Error: unpoint called on non pointed region\n", map->name);
+			err = -EINVAL;
+		}
 
 		put_chip(map, chip, chip->start);
 		mutex_unlock(&chip->mutex);
@@ -1410,6 +1441,8 @@ static void cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 		ofs = 0;
 		chipnum++;
 	}
+
+	return err;
 }
 
 static inline int do_read_onechip(struct map_info *map, struct flchip *chip, loff_t adr, size_t len, u_char *buf)
@@ -1456,8 +1489,6 @@ static int cfi_intelext_read (struct mtd_info *mtd, loff_t from, size_t len, siz
 	chipnum = (from >> cfi->chipshift);
 	ofs = from - (chipnum <<  cfi->chipshift);
 
-	*retlen = 0;
-
 	while (len) {
 		unsigned long thislen;
 
@@ -1494,7 +1525,7 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip,
 
 	switch (mode) {
 	case FL_WRITING:
-		write_cmd = (cfi->cfiq->P_ID != 0x0200) ? CMD(0x40) : CMD(0x41);
+		write_cmd = (cfi->cfiq->P_ID != P_ID_INTEL_PERFORMANCE) ? CMD(0x40) : CMD(0x41);
 		break;
 	case FL_OTP_WRITE:
 		write_cmd = CMD(0xc0);
@@ -1551,7 +1582,8 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip,
 	}
 
 	xip_enable(map, chip, adr);
- out:	put_chip(map, chip, adr);
+ out:	DISABLE_VPP(map);
+	put_chip(map, chip, adr);
 	mutex_unlock(&chip->mutex);
 	return ret;
 }
@@ -1565,10 +1597,6 @@ static int cfi_intelext_write_words (struct mtd_info *mtd, loff_t to , size_t le
 	int chipnum;
 	unsigned long ofs;
 
-	*retlen = 0;
-	if (!len)
-		return 0;
-
 	chipnum = to >> cfi->chipshift;
 	ofs = to  - (chipnum << cfi->chipshift);
 
@@ -1658,8 +1686,14 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
 	initial_adr = adr;
 	cmd_adr = adr & ~(wbufsize-1);
 
+	/* Sharp LH28F640BF chips need the first address for the
+	 * Page Buffer Program command. See Table 5 of
+	 * LH28F320BF, LH28F640BF, LH28F128BF Series (Appendix FUM00701) */
+	if (is_LH28F640BF(cfi))
+		cmd_adr = adr;
+
 	/* Let's determine this according to the interleave only once */
-	write_cmd = (cfi->cfiq->P_ID != 0x0200) ? CMD(0xe8) : CMD(0xe9);
+	write_cmd = (cfi->cfiq->P_ID != P_ID_INTEL_PERFORMANCE) ? CMD(0xe8) : CMD(0xe9);
 
 	mutex_lock(&chip->mutex);
 	ret = get_chip(map, chip, cmd_adr, FL_WRITING);
@@ -1794,7 +1828,8 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
 	}
 
 	xip_enable(map, chip, cmd_adr);
- out:	put_chip(map, chip, cmd_adr);
+ out:	DISABLE_VPP(map);
+	put_chip(map, chip, cmd_adr);
 	mutex_unlock(&chip->mutex);
 	return ret;
 }
@@ -1813,7 +1848,6 @@ static int cfi_intelext_writev (struct mtd_info *mtd, const struct kvec *vecs,
 	for (i = 0; i < count; i++)
 		len += vecs[i].iov_len;
 
-	*retlen = 0;
 	if (!len)
 		return 0;
 
@@ -1932,6 +1966,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
 			ret = -EIO;
 		} else if (chipstatus & 0x20 && retries--) {
 			printk(KERN_DEBUG "block erase failed at 0x%08lx: status 0x%lx. Retrying...\n", adr, chipstatus);
+			DISABLE_VPP(map);
 			put_chip(map, chip, adr);
 			mutex_unlock(&chip->mutex);
 			goto retry;
@@ -1944,7 +1979,8 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
 	}
 
 	xip_enable(map, chip, adr);
- out:	put_chip(map, chip, adr);
+ out:	DISABLE_VPP(map);
+	put_chip(map, chip, adr);
 	mutex_unlock(&chip->mutex);
 	return ret;
 }
@@ -2045,7 +2081,7 @@ static int __xipram do_xxlock_oneblock(struct map_info *map, struct flchip *chip
 {
 	struct cfi_private *cfi = map->fldrv_priv;
 	struct cfi_pri_intelext *extp = cfi->cmdset_priv;
-	int udelay;
+	int mdelay;
 	int ret;
 
 	adr += chip->start;
@@ -2074,9 +2110,17 @@ static int __xipram do_xxlock_oneblock(struct map_info *map, struct flchip *chip
 	 * If Instant Individual Block Locking supported then no need
 	 * to delay.
 	 */
-	udelay = (!extp || !(extp->FeatureSupport & (1 << 5))) ? 1000000/HZ : 0;
+	/*
+	 * Unlocking may take up to 1.4 seconds on some Intel flashes. So
+	 * lets use a max of 1.5 seconds (1500ms) as timeout.
+	 *
+	 * See "Clear Block Lock-Bits Time" on page 40 in
+	 * "3 Volt Intel StrataFlash Memory" 28F128J3,28F640J3,28F320J3 manual
+	 * from February 2003
+	 */
+	mdelay = (!extp || !(extp->FeatureSupport & (1 << 5))) ? 1500 : 0;
 
-	ret = WAIT_TIMEOUT(map, chip, adr, udelay, udelay * 100);
+	ret = WAIT_TIMEOUT(map, chip, adr, mdelay, mdelay * 1000);
 	if (ret) {
 		map_write(map, CMD(0x70), adr);
 		chip->state = FL_STATUS;
@@ -2086,7 +2130,8 @@ static int __xipram do_xxlock_oneblock(struct map_info *map, struct flchip *chip
 	}
 
 	xip_enable(map, chip, adr);
-out:	put_chip(map, chip, adr);
+ out:	DISABLE_VPP(map);
+	put_chip(map, chip, adr);
 	mutex_unlock(&chip->mutex);
 	return ret;
 }
@@ -2139,6 +2184,13 @@ static int cfi_intelext_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 	return ret;
 }
 
+static int cfi_intelext_is_locked(struct mtd_info *mtd, loff_t ofs,
+				  uint64_t len)
+{
+	return cfi_varsize_frob(mtd, do_getlockstatus_oneblock,
+				ofs, len, NULL) ? 1 : 0;
+}
+
 #ifdef CONFIG_MTD_OTP
 
 typedef int (*otp_op_t)(struct map_info *map, struct flchip *chip,
@@ -2385,24 +2437,19 @@ static int cfi_intelext_lock_user_prot_reg(struct mtd_info *mtd,
 				     NULL, do_otp_lock, 1);
 }
 
-static int cfi_intelext_get_fact_prot_info(struct mtd_info *mtd,
-					   struct otp_info *buf, size_t len)
-{
-	size_t retlen;
-	int ret;
+static int cfi_intelext_get_fact_prot_info(struct mtd_info *mtd, size_t len,
+					   size_t *retlen, struct otp_info *buf)
 
-	ret = cfi_intelext_otp_walk(mtd, 0, len, &retlen, (u_char *)buf, NULL, 0);
-	return ret ? : retlen;
+{
+	return cfi_intelext_otp_walk(mtd, 0, len, retlen, (u_char *)buf,
+				     NULL, 0);
 }
 
-static int cfi_intelext_get_user_prot_info(struct mtd_info *mtd,
-					   struct otp_info *buf, size_t len)
+static int cfi_intelext_get_user_prot_info(struct mtd_info *mtd, size_t len,
+					   size_t *retlen, struct otp_info *buf)
 {
-	size_t retlen;
-	int ret;
-
-	ret = cfi_intelext_otp_walk(mtd, 0, len, &retlen, (u_char *)buf, NULL, 1);
-	return ret ? : retlen;
+	return cfi_intelext_otp_walk(mtd, 0, len, retlen, (u_char *)buf,
+				     NULL, 1);
 }
 
 #endif
@@ -2476,7 +2523,7 @@ static int cfi_intelext_suspend(struct mtd_info *mtd)
 			   allowed to. Or should we return -EAGAIN, because the upper layers
 			   ought to have already shut down anything which was using the device
 			   anyway? The latter for now. */
-			printk(KERN_NOTICE "Flash device refused suspend due to active operation (state %d)\n", chip->oldstate);
+			printk(KERN_NOTICE "Flash device refused suspend due to active operation (state %d)\n", chip->state);
 			ret = -EAGAIN;
 		case FL_PM_SUSPENDED:
 			break;
@@ -2519,12 +2566,10 @@ static void cfi_intelext_restore_locks(struct mtd_info *mtd)
 		if (!region->lockmap)
 			continue;
 
-		for (block = 0; block < region->numblocks; block++) {
+		for_each_clear_bit(block, region->lockmap, region->numblocks) {
 			len = region->erasesize;
 			adr = region->offset + block * len;
-
-			if (!test_bit(block, region->lockmap))
-				cfi_intelext_unlock(mtd, adr, len);
+			cfi_intelext_unlock(mtd, adr, len);
 		}
 	}
 }
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index d81079ef91a..e21fde9d4d7 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -24,7 +24,6 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
-#include <linux/init.h>
 #include <asm/io.h>
 #include <asm/byteorder.h>
 
@@ -33,7 +32,8 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/reboot.h>
-#include <linux/mtd/compatmac.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/cfi.h>
@@ -60,6 +60,9 @@ static void cfi_amdstd_resume (struct mtd_info *);
 static int cfi_amdstd_reboot(struct notifier_block *, unsigned long, void *);
 static int cfi_amdstd_secsi_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
 
+static int cfi_amdstd_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
+				  size_t *retlen, const u_char *buf);
+
 static void cfi_amdstd_destroy(struct mtd_info *);
 
 struct mtd_info *cfi_cmdset_0002(struct map_info *, int);
@@ -72,6 +75,10 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad
 static int cfi_atmel_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
 static int cfi_atmel_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
 
+static int cfi_ppb_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+static int cfi_ppb_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+static int cfi_ppb_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+
 static struct mtd_chip_driver cfi_amdstd_chipdrv = {
 	.probe		= NULL, /* Not usable directly */
 	.destroy	= cfi_amdstd_destroy,
@@ -135,7 +142,7 @@ static void cfi_tell_features(struct cfi_pri_amdstd *extp)
 
 #ifdef AMD_BOOTLOC_BUG
 /* Wheee. Bring me the head of someone at AMD. */
-static void fixup_amd_bootblock(struct mtd_info *mtd, void* param)
+static void fixup_amd_bootblock(struct mtd_info *mtd)
 {
 	struct map_info *map = mtd->priv;
 	struct cfi_private *cfi = map->fldrv_priv;
@@ -146,8 +153,7 @@ static void fixup_amd_bootblock(struct mtd_info *mtd, void* param)
 	if (((major << 8) | minor) < 0x3131) {
 		/* CFI version 1.0 => don't trust bootloc */
 
-		DEBUG(MTD_DEBUG_LEVEL1,
-			"%s: JEDEC Vendor ID is 0x%02X Device ID is 0x%02X\n",
+		pr_debug("%s: JEDEC Vendor ID is 0x%02X Device ID is 0x%02X\n",
 			map->name, cfi->mfr, cfi->id);
 
 		/* AFAICS all 29LV400 with a bottom boot block have a device ID
@@ -167,8 +173,7 @@ static void fixup_amd_bootblock(struct mtd_info *mtd, void* param)
 			 * the 8-bit device ID.
 			 */
 			(cfi->mfr == CFI_MFR_MACRONIX)) {
-			DEBUG(MTD_DEBUG_LEVEL1,
-				"%s: Macronix MX29LV400C with bottom boot block"
+			pr_debug("%s: Macronix MX29LV400C with bottom boot block"
 				" detected\n", map->name);
 			extp->TopBottom = 2;	/* bottom boot */
 		} else
@@ -179,26 +184,25 @@ static void fixup_amd_bootblock(struct mtd_info *mtd, void* param)
 			extp->TopBottom = 2;	/* bottom boot */
 		}
 
-		DEBUG(MTD_DEBUG_LEVEL1,
-			"%s: AMD CFI PRI V%c.%c has no boot block field;"
+		pr_debug("%s: AMD CFI PRI V%c.%c has no boot block field;"
 			" deduced %s from Device ID\n", map->name, major, minor,
 			extp->TopBottom == 2 ? "bottom" : "top");
 	}
 }
 #endif
 
-static void fixup_use_write_buffers(struct mtd_info *mtd, void *param)
+static void fixup_use_write_buffers(struct mtd_info *mtd)
 {
 	struct map_info *map = mtd->priv;
 	struct cfi_private *cfi = map->fldrv_priv;
 	if (cfi->cfiq->BufWriteTimeoutTyp) {
-		DEBUG(MTD_DEBUG_LEVEL1, "Using buffer write method\n" );
-		mtd->write = cfi_amdstd_write_buffers;
+		pr_debug("Using buffer write method\n" );
+		mtd->_write = cfi_amdstd_write_buffers;
 	}
 }
 
 /* Atmel chips don't use the same PRI format as AMD chips */
-static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
+static void fixup_convert_atmel_pri(struct mtd_info *mtd)
 {
 	struct map_info *map = mtd->priv;
 	struct cfi_private *cfi = map->fldrv_priv;
@@ -229,20 +233,20 @@ static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
 	cfi->cfiq->BufWriteTimeoutMax = 0;
 }
 
-static void fixup_use_secsi(struct mtd_info *mtd, void *param)
+static void fixup_use_secsi(struct mtd_info *mtd)
 {
 	/* Setup for chips with a secsi area */
-	mtd->read_user_prot_reg = cfi_amdstd_secsi_read;
-	mtd->read_fact_prot_reg = cfi_amdstd_secsi_read;
+	mtd->_read_user_prot_reg = cfi_amdstd_secsi_read;
+	mtd->_read_fact_prot_reg = cfi_amdstd_secsi_read;
 }
 
-static void fixup_use_erase_chip(struct mtd_info *mtd, void *param)
+static void fixup_use_erase_chip(struct mtd_info *mtd)
 {
 	struct map_info *map = mtd->priv;
 	struct cfi_private *cfi = map->fldrv_priv;
 	if ((cfi->cfiq->NumEraseRegions == 1) &&
 		((cfi->cfiq->EraseRegionInfo[0] & 0xffff) == 0)) {
-		mtd->erase = cfi_amdstd_erase_chip;
+		mtd->_erase = cfi_amdstd_erase_chip;
 	}
 
 }
@@ -251,10 +255,10 @@ static void fixup_use_erase_chip(struct mtd_info *mtd, void *param)
  * Some Atmel chips (e.g. the AT49BV6416) power-up with all sectors
  * locked by default.
  */
-static void fixup_use_atmel_lock(struct mtd_info *mtd, void *param)
+static void fixup_use_atmel_lock(struct mtd_info *mtd)
 {
-	mtd->lock = cfi_atmel_lock;
-	mtd->unlock = cfi_atmel_unlock;
+	mtd->_lock = cfi_atmel_lock;
+	mtd->_unlock = cfi_atmel_unlock;
 	mtd->flags |= MTD_POWERUP_LOCK;
 }
 
@@ -264,7 +268,7 @@ static void fixup_old_sst_eraseregion(struct mtd_info *mtd)
 	struct cfi_private *cfi = map->fldrv_priv;
 
 	/*
-	 * These flashes report two seperate eraseblock regions based on the
+	 * These flashes report two separate eraseblock regions based on the
 	 * sector_erase-size and block_erase-size, although they both operate on the
 	 * same memory. This is not allowed according to CFI, so we just pick the
 	 * sector_erase-size.
@@ -272,7 +276,7 @@ static void fixup_old_sst_eraseregion(struct mtd_info *mtd)
 	cfi->cfiq->NumEraseRegions = 1;
 }
 
-static void fixup_sst39vf(struct mtd_info *mtd, void *param)
+static void fixup_sst39vf(struct mtd_info *mtd)
 {
 	struct map_info *map = mtd->priv;
 	struct cfi_private *cfi = map->fldrv_priv;
@@ -283,7 +287,7 @@ static void fixup_sst39vf(struct mtd_info *mtd, void *param)
 	cfi->addr_unlock2 = 0x2AAA;
 }
 
-static void fixup_sst39vf_rev_b(struct mtd_info *mtd, void *param)
+static void fixup_sst39vf_rev_b(struct mtd_info *mtd)
 {
 	struct map_info *map = mtd->priv;
 	struct cfi_private *cfi = map->fldrv_priv;
@@ -292,69 +296,105 @@ static void fixup_sst39vf_rev_b(struct mtd_info *mtd, void *param)
 
 	cfi->addr_unlock1 = 0x555;
 	cfi->addr_unlock2 = 0x2AA;
+
+	cfi->sector_erase_cmd = CMD(0x50);
 }
 
-static void fixup_s29gl064n_sectors(struct mtd_info *mtd, void *param)
+static void fixup_sst38vf640x_sectorsize(struct mtd_info *mtd)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+
+	fixup_sst39vf_rev_b(mtd);
+
+	/*
+	 * CFI reports 1024 sectors (0x03ff+1) of 64KBytes (0x0100*256) where
+	 * it should report a size of 8KBytes (0x0020*256).
+	 */
+	cfi->cfiq->EraseRegionInfo[0] = 0x002003ff;
+	pr_warning("%s: Bad 38VF640x CFI data; adjusting sector size from 64 to 8KiB\n", mtd->name);
+}
+
+static void fixup_s29gl064n_sectors(struct mtd_info *mtd)
 {
 	struct map_info *map = mtd->priv;
 	struct cfi_private *cfi = map->fldrv_priv;
 
 	if ((cfi->cfiq->EraseRegionInfo[0] & 0xffff) == 0x003f) {
 		cfi->cfiq->EraseRegionInfo[0] |= 0x0040;
-		pr_warning("%s: Bad S29GL064N CFI data, adjust from 64 to 128 sectors\n", mtd->name);
+		pr_warning("%s: Bad S29GL064N CFI data; adjust from 64 to 128 sectors\n", mtd->name);
 	}
 }
 
-static void fixup_s29gl032n_sectors(struct mtd_info *mtd, void *param)
+static void fixup_s29gl032n_sectors(struct mtd_info *mtd)
 {
 	struct map_info *map = mtd->priv;
 	struct cfi_private *cfi = map->fldrv_priv;
 
 	if ((cfi->cfiq->EraseRegionInfo[1] & 0xffff) == 0x007e) {
 		cfi->cfiq->EraseRegionInfo[1] &= ~0x0040;
-		pr_warning("%s: Bad S29GL032N CFI data, adjust from 127 to 63 sectors\n", mtd->name);
+		pr_warning("%s: Bad S29GL032N CFI data; adjust from 127 to 63 sectors\n", mtd->name);
 	}
 }
 
+static void fixup_s29ns512p_sectors(struct mtd_info *mtd)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+
+	/*
+	 *  S29NS512P flash uses more than 8bits to report number of sectors,
+	 * which is not permitted by CFI.
+	 */
+	cfi->cfiq->EraseRegionInfo[0] = 0x020001ff;
+	pr_warning("%s: Bad S29NS512P CFI data; adjust to 512 sectors\n", mtd->name);
+}
+
 /* Used to fix CFI-Tables of chips without Extended Query Tables */
 static struct cfi_fixup cfi_nopri_fixup_table[] = {
-	{ CFI_MFR_SST, 0x234A, fixup_sst39vf, NULL, }, // SST39VF1602
-	{ CFI_MFR_SST, 0x234B, fixup_sst39vf, NULL, }, // SST39VF1601
-	{ CFI_MFR_SST, 0x235A, fixup_sst39vf, NULL, }, // SST39VF3202
-	{ CFI_MFR_SST, 0x235B, fixup_sst39vf, NULL, }, // SST39VF3201
-	{ CFI_MFR_SST, 0x235C, fixup_sst39vf_rev_b, NULL, }, // SST39VF3202B
-	{ CFI_MFR_SST, 0x235D, fixup_sst39vf_rev_b, NULL, }, // SST39VF3201B
-	{ CFI_MFR_SST, 0x236C, fixup_sst39vf_rev_b, NULL, }, // SST39VF6402B
-	{ CFI_MFR_SST, 0x236D, fixup_sst39vf_rev_b, NULL, }, // SST39VF6401B
-	{ 0, 0, NULL, NULL }
+	{ CFI_MFR_SST, 0x234a, fixup_sst39vf }, /* SST39VF1602 */
+	{ CFI_MFR_SST, 0x234b, fixup_sst39vf }, /* SST39VF1601 */
+	{ CFI_MFR_SST, 0x235a, fixup_sst39vf }, /* SST39VF3202 */
+	{ CFI_MFR_SST, 0x235b, fixup_sst39vf }, /* SST39VF3201 */
+	{ CFI_MFR_SST, 0x235c, fixup_sst39vf_rev_b }, /* SST39VF3202B */
+	{ CFI_MFR_SST, 0x235d, fixup_sst39vf_rev_b }, /* SST39VF3201B */
+	{ CFI_MFR_SST, 0x236c, fixup_sst39vf_rev_b }, /* SST39VF6402B */
+	{ CFI_MFR_SST, 0x236d, fixup_sst39vf_rev_b }, /* SST39VF6401B */
+	{ 0, 0, NULL }
 };
 
 static struct cfi_fixup cfi_fixup_table[] = {
-	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri },
 #ifdef AMD_BOOTLOC_BUG
-	{ CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
-	{ CFI_MFR_MACRONIX, CFI_ID_ANY, fixup_amd_bootblock, NULL },
+	{ CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock },
+	{ CFI_MFR_AMIC, CFI_ID_ANY, fixup_amd_bootblock },
+	{ CFI_MFR_MACRONIX, CFI_ID_ANY, fixup_amd_bootblock },
 #endif
-	{ CFI_MFR_AMD, 0x0050, fixup_use_secsi, NULL, },
-	{ CFI_MFR_AMD, 0x0053, fixup_use_secsi, NULL, },
-	{ CFI_MFR_AMD, 0x0055, fixup_use_secsi, NULL, },
-	{ CFI_MFR_AMD, 0x0056, fixup_use_secsi, NULL, },
-	{ CFI_MFR_AMD, 0x005C, fixup_use_secsi, NULL, },
-	{ CFI_MFR_AMD, 0x005F, fixup_use_secsi, NULL, },
-	{ CFI_MFR_AMD, 0x0c01, fixup_s29gl064n_sectors, NULL, },
-	{ CFI_MFR_AMD, 0x1301, fixup_s29gl064n_sectors, NULL, },
-	{ CFI_MFR_AMD, 0x1a00, fixup_s29gl032n_sectors, NULL, },
-	{ CFI_MFR_AMD, 0x1a01, fixup_s29gl032n_sectors, NULL, },
+	{ CFI_MFR_AMD, 0x0050, fixup_use_secsi },
+	{ CFI_MFR_AMD, 0x0053, fixup_use_secsi },
+	{ CFI_MFR_AMD, 0x0055, fixup_use_secsi },
+	{ CFI_MFR_AMD, 0x0056, fixup_use_secsi },
+	{ CFI_MFR_AMD, 0x005C, fixup_use_secsi },
+	{ CFI_MFR_AMD, 0x005F, fixup_use_secsi },
+	{ CFI_MFR_AMD, 0x0c01, fixup_s29gl064n_sectors },
+	{ CFI_MFR_AMD, 0x1301, fixup_s29gl064n_sectors },
+	{ CFI_MFR_AMD, 0x1a00, fixup_s29gl032n_sectors },
+	{ CFI_MFR_AMD, 0x1a01, fixup_s29gl032n_sectors },
+	{ CFI_MFR_AMD, 0x3f00, fixup_s29ns512p_sectors },
+	{ CFI_MFR_SST, 0x536a, fixup_sst38vf640x_sectorsize }, /* SST38VF6402 */
+	{ CFI_MFR_SST, 0x536b, fixup_sst38vf640x_sectorsize }, /* SST38VF6401 */
+	{ CFI_MFR_SST, 0x536c, fixup_sst38vf640x_sectorsize }, /* SST38VF6404 */
+	{ CFI_MFR_SST, 0x536d, fixup_sst38vf640x_sectorsize }, /* SST38VF6403 */
 #if !FORCE_WORD_WRITE
-	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
+	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers },
 #endif
-	{ 0, 0, NULL, NULL }
+	{ 0, 0, NULL }
 };
 static struct cfi_fixup jedec_fixup_table[] = {
-	{ CFI_MFR_SST, SST49LF004B, fixup_use_fwh_lock, NULL, },
-	{ CFI_MFR_SST, SST49LF040B, fixup_use_fwh_lock, NULL, },
-	{ CFI_MFR_SST, SST49LF008A, fixup_use_fwh_lock, NULL, },
-	{ 0, 0, NULL, NULL }
+	{ CFI_MFR_SST, SST49LF004B, fixup_use_fwh_lock },
+	{ CFI_MFR_SST, SST49LF040B, fixup_use_fwh_lock },
+	{ CFI_MFR_SST, SST49LF008A, fixup_use_fwh_lock },
+	{ 0, 0, NULL }
 };
 
 static struct cfi_fixup fixup_table[] = {
@@ -363,45 +403,130 @@ static struct cfi_fixup fixup_table[] = {
 	 * well.  This table is to pick all cases where
 	 * we know that is the case.
 	 */
-	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL },
-	{ CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL },
-	{ 0, 0, NULL, NULL }
+	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip },
+	{ CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock },
+	{ 0, 0, NULL }
 };
 
 
 static void cfi_fixup_major_minor(struct cfi_private *cfi,
 				  struct cfi_pri_amdstd *extp)
 {
-	if (cfi->mfr == CFI_MFR_SAMSUNG && cfi->id == 0x257e &&
-	    extp->MajorVersion == '0')
+	if (cfi->mfr == CFI_MFR_SAMSUNG) {
+		if ((extp->MajorVersion == '0' && extp->MinorVersion == '0') ||
+		    (extp->MajorVersion == '3' && extp->MinorVersion == '3')) {
+			/*
+			 * Samsung K8P2815UQB and K8D6x16UxM chips
+			 * report major=0 / minor=0.
+			 * K8D3x16UxC chips report major=3 / minor=3.
+			 */
+			printk(KERN_NOTICE "  Fixing Samsung's Amd/Fujitsu"
+			       " Extended Query version to 1.%c\n",
+			       extp->MinorVersion);
+			extp->MajorVersion = '1';
+		}
+	}
+
+	/*
+	 * SST 38VF640x chips report major=0xFF / minor=0xFF.
+	 */
+	if (cfi->mfr == CFI_MFR_SST && (cfi->id >> 4) == 0x0536) {
 		extp->MajorVersion = '1';
+		extp->MinorVersion = '0';
+	}
+}
+
+static int is_m29ew(struct cfi_private *cfi)
+{
+	if (cfi->mfr == CFI_MFR_INTEL &&
+	    ((cfi->device_type == CFI_DEVICETYPE_X8 && (cfi->id & 0xff) == 0x7e) ||
+	     (cfi->device_type == CFI_DEVICETYPE_X16 && cfi->id == 0x227e)))
+		return 1;
+	return 0;
+}
+
+/*
+ * From TN-13-07: Patching the Linux Kernel and U-Boot for M29 Flash, page 20:
+ * Some revisions of the M29EW suffer from erase suspend hang ups. In
+ * particular, it can occur when the sequence
+ * Erase Confirm -> Suspend -> Program -> Resume
+ * causes a lockup due to internal timing issues. The consequence is that the
+ * erase cannot be resumed without inserting a dummy command after programming
+ * and prior to resuming. [...] The work-around is to issue a dummy write cycle
+ * that writes an F0 command code before the RESUME command.
+ */
+static void cfi_fixup_m29ew_erase_suspend(struct map_info *map,
+					  unsigned long adr)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	/* before resume, insert a dummy 0xF0 cycle for Micron M29EW devices */
+	if (is_m29ew(cfi))
+		map_write(map, CMD(0xF0), adr);
+}
+
+/*
+ * From TN-13-07: Patching the Linux Kernel and U-Boot for M29 Flash, page 22:
+ *
+ * Some revisions of the M29EW (for example, A1 and A2 step revisions)
+ * are affected by a problem that could cause a hang up when an ERASE SUSPEND
+ * command is issued after an ERASE RESUME operation without waiting for a
+ * minimum delay.  The result is that once the ERASE seems to be completed
+ * (no bits are toggling), the contents of the Flash memory block on which
+ * the erase was ongoing could be inconsistent with the expected values
+ * (typically, the array value is stuck to the 0xC0, 0xC4, 0x80, or 0x84
+ * values), causing a consequent failure of the ERASE operation.
+ * The occurrence of this issue could be high, especially when file system
+ * operations on the Flash are intensive.  As a result, it is recommended
+ * that a patch be applied.  Intensive file system operations can cause many
+ * calls to the garbage routine to free Flash space (also by erasing physical
+ * Flash blocks) and as a result, many consecutive SUSPEND and RESUME
+ * commands can occur.  The problem disappears when a delay is inserted after
+ * the RESUME command by using the udelay() function available in Linux.
+ * The DELAY value must be tuned based on the customer's platform.
+ * The maximum value that fixes the problem in all cases is 500us.
+ * But, in our experience, a delay of 30 µs to 50 µs is sufficient
+ * in most cases.
+ * We have chosen 500µs because this latency is acceptable.
+ */
+static void cfi_fixup_m29ew_delay_after_resume(struct cfi_private *cfi)
+{
+	/*
+	 * Resolving the Delay After Resume Issue see Micron TN-13-07
+	 * Worst case delay must be 500µs but 30-50µs should be ok as well
+	 */
+	if (is_m29ew(cfi))
+		cfi_udelay(500);
 }
 
 struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)
 {
 	struct cfi_private *cfi = map->fldrv_priv;
+	struct device_node __maybe_unused *np = map->device_node;
 	struct mtd_info *mtd;
 	int i;
 
 	mtd = kzalloc(sizeof(*mtd), GFP_KERNEL);
-	if (!mtd) {
-		printk(KERN_WARNING "Failed to allocate memory for MTD device\n");
+	if (!mtd)
 		return NULL;
-	}
 	mtd->priv = map;
 	mtd->type = MTD_NORFLASH;
 
 	/* Fill in the default mtd operations */
-	mtd->erase   = cfi_amdstd_erase_varsize;
-	mtd->write   = cfi_amdstd_write_words;
-	mtd->read    = cfi_amdstd_read;
-	mtd->sync    = cfi_amdstd_sync;
-	mtd->suspend = cfi_amdstd_suspend;
-	mtd->resume  = cfi_amdstd_resume;
+	mtd->_erase   = cfi_amdstd_erase_varsize;
+	mtd->_write   = cfi_amdstd_write_words;
+	mtd->_read    = cfi_amdstd_read;
+	mtd->_sync    = cfi_amdstd_sync;
+	mtd->_suspend = cfi_amdstd_suspend;
+	mtd->_resume  = cfi_amdstd_resume;
 	mtd->flags   = MTD_CAP_NORFLASH;
 	mtd->name    = map->name;
 	mtd->writesize = 1;
+	mtd->writebufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize;
+
+	pr_debug("MTD %s(): write buffer size %d\n", __func__,
+			mtd->writebufsize);
 
+	mtd->_panic_write = cfi_amdstd_panic_write;
 	mtd->reboot_notifier.notifier_call = cfi_amdstd_reboot;
 
 	if (cfi->cfi_mode==CFI_MODE_CFI){
@@ -417,16 +542,27 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)
 			 */
 			cfi_fixup_major_minor(cfi, extp);
 
+			/*
+			 * Valid primary extension versions are: 1.0, 1.1, 1.2, 1.3, 1.4, 1.5
+			 * see: http://cs.ozerki.net/zap/pub/axim-x5/docs/cfi_r20.pdf, page 19 
+			 *      http://www.spansion.com/Support/AppNotes/cfi_100_20011201.pdf
+			 *      http://www.spansion.com/Support/Datasheets/s29ws-p_00_a12_e.pdf
+			 *      http://www.spansion.com/Support/Datasheets/S29GL_128S_01GS_00_02_e.pdf
+			 */
 			if (extp->MajorVersion != '1' ||
-			    (extp->MinorVersion < '0' || extp->MinorVersion > '4')) {
+			    (extp->MajorVersion == '1' && (extp->MinorVersion < '0' || extp->MinorVersion > '5'))) {
 				printk(KERN_ERR "  Unknown Amd/Fujitsu Extended Query "
-				       "version %c.%c.\n",  extp->MajorVersion,
-				       extp->MinorVersion);
+				       "version %c.%c (%#02x/%#02x).\n",
+				       extp->MajorVersion, extp->MinorVersion,
+				       extp->MajorVersion, extp->MinorVersion);
 				kfree(extp);
 				kfree(mtd);
 				return NULL;
 			}
 
+			printk(KERN_INFO "  Amd/Fujitsu Extended Query version %c.%c.\n",
+			       extp->MajorVersion, extp->MinorVersion);
+
 			/* Install our own private info structure */
 			cfi->cmdset_priv = extp;
 
@@ -438,6 +574,17 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)
 			cfi_tell_features(extp);
 #endif
 
+#ifdef CONFIG_OF
+			if (np && of_property_read_bool(
+				    np, "use-advanced-sector-protection")
+			    && extp->BlkProtUnprot == 8) {
+				printk(KERN_INFO "  Advanced Sector Protection (PPB Locking) supported\n");
+				mtd->_lock = cfi_ppb_lock;
+				mtd->_unlock = cfi_ppb_unlock;
+				mtd->_is_locked = cfi_ppb_is_locked;
+			}
+#endif
+
 			bootloc = extp->TopBottom;
 			if ((bootloc < 2) || (bootloc > 5)) {
 				printk(KERN_WARNING "%s: CFI contains unrecognised boot "
@@ -511,10 +658,8 @@ static struct mtd_info *cfi_amdstd_setup(struct mtd_info *mtd)
 	mtd->numeraseregions = cfi->cfiq->NumEraseRegions * cfi->numchips;
 	mtd->eraseregions = kmalloc(sizeof(struct mtd_erase_region_info)
 				    * mtd->numeraseregions, GFP_KERNEL);
-	if (!mtd->eraseregions) {
-		printk(KERN_WARNING "Failed to allocate memory for MTD erase region info\n");
+	if (!mtd->eraseregions)
 		goto setup_err;
-	}
 
 	for (i=0; i<cfi->cfiq->NumEraseRegions; i++) {
 		unsigned long ernum, ersize;
@@ -536,15 +681,6 @@ static struct mtd_info *cfi_amdstd_setup(struct mtd_info *mtd)
 		printk(KERN_WARNING "Sum of regions (%lx) != total size of set of interleaved chips (%lx)\n", offset, devsize);
 		goto setup_err;
 	}
-#if 0
-	// debug
-	for (i=0; i<mtd->numeraseregions;i++){
-		printk("%d: offset=0x%x,size=0x%x,blocks=%d\n",
-		       i,mtd->eraseregions[i].offset,
-		       mtd->eraseregions[i].erasesize,
-		       mtd->eraseregions[i].numblocks);
-	}
-#endif
 
 	__module_get(THIS_MODULE);
 	register_reboot_notifier(&mtd->reboot_notifier);
@@ -566,8 +702,8 @@ static struct mtd_info *cfi_amdstd_setup(struct mtd_info *mtd)
  *
  * Note that anything more complicated than checking if no bits are toggling
  * (including checking DQ5 for an error status) is tricky to get working
- * correctly and is therefore not done	(particulary with interleaved chips
- * as each chip must be checked independantly of the others).
+ * correctly and is therefore not done	(particularly with interleaved chips
+ * as each chip must be checked independently of the others).
  */
 static int __xipram chip_ready(struct map_info *map, unsigned long addr)
 {
@@ -590,8 +726,8 @@ static int __xipram chip_ready(struct map_info *map, unsigned long addr)
  *
  * Note that anything more complicated than checking if no bits are toggling
  * (including checking DQ5 for an error status) is tricky to get working
- * correctly and is therefore not done	(particulary with interleaved chips
- * as each chip must be checked independantly of the others).
+ * correctly and is therefore not done	(particularly with interleaved chips
+ * as each chip must be checked independently of the others).
  *
  */
 static int __xipram chip_good(struct map_info *map, unsigned long addr, map_word expected)
@@ -665,9 +801,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
 				 * there was an error (so leave the erase
 				 * routine to recover from it) or we trying to
 				 * use the erase-in-progress sector. */
-				map_write(map, CMD(0x30), chip->in_progress_block_addr);
-				chip->state = FL_ERASING;
-				chip->oldstate = FL_READY;
+				put_chip(map, chip, adr);
 				printk(KERN_ERR "MTD %s(): chip not ready after erase suspend\n", __func__);
 				return -EIO;
 			}
@@ -717,8 +851,10 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad
 
 	switch(chip->oldstate) {
 	case FL_ERASING:
-		chip->state = chip->oldstate;
-		map_write(map, CMD(0x30), chip->in_progress_block_addr);
+		cfi_fixup_m29ew_erase_suspend(map,
+			chip->in_progress_block_addr);
+		map_write(map, cfi->sector_erase_cmd, chip->in_progress_block_addr);
+		cfi_fixup_m29ew_delay_after_resume(cfi);
 		chip->oldstate = FL_READY;
 		chip->state = FL_ERASING;
 		break;
@@ -730,8 +866,6 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad
 
 	case FL_READY:
 	case FL_STATUS:
-		/* We should really make set_vpp() count, rather than doing this */
-		DISABLE_VPP(map);
 		break;
 	default:
 		printk(KERN_ERR "MTD: put_chip() called with oldstate %d!!\n", chip->oldstate);
@@ -860,8 +994,10 @@ static void __xipram xip_udelay(struct map_info *map, struct flchip *chip,
 			/* Disallow XIP again */
 			local_irq_disable();
 
+			/* Correct Erase Suspend Hangups for M29EW */
+			cfi_fixup_m29ew_erase_suspend(map, adr);
 			/* Resume the write or erase operation */
-			map_write(map, CMD(0x30), adr);
+			map_write(map, cfi->sector_erase_cmd, adr);
 			chip->state = oldstate;
 			start = xip_currtime();
 		} else if (usec >= 1000000/HZ) {
@@ -973,13 +1109,9 @@ static int cfi_amdstd_read (struct mtd_info *mtd, loff_t from, size_t len, size_
 	int ret = 0;
 
 	/* ofs: offset within the first chip that the first read should start */
-
 	chipnum = (from >> cfi->chipshift);
 	ofs = from - (chipnum <<  cfi->chipshift);
 
-
-	*retlen = 0;
-
 	while (len) {
 		unsigned long thislen;
 
@@ -1016,9 +1148,6 @@ static inline int do_read_secsi_onechip(struct map_info *map, struct flchip *chi
 	mutex_lock(&chip->mutex);
 
 	if (chip->state != FL_READY){
-#if 0
-		printk(KERN_DEBUG "Waiting for chip to read, status = %d\n", chip->state);
-#endif
 		set_current_state(TASK_UNINTERRUPTIBLE);
 		add_wait_queue(&chip->wq, &wait);
 
@@ -1026,10 +1155,6 @@ static inline int do_read_secsi_onechip(struct map_info *map, struct flchip *chi
 
 		schedule();
 		remove_wait_queue(&chip->wq, &wait);
-#if 0
-		if(signal_pending(current))
-			return -EINTR;
-#endif
 		timeo = jiffies + HZ;
 
 		goto retry;
@@ -1064,16 +1189,11 @@ static int cfi_amdstd_secsi_read (struct mtd_info *mtd, loff_t from, size_t len,
 	int chipnum;
 	int ret = 0;
 
-
 	/* ofs: offset within the first chip that the first read should start */
-
 	/* 8 secsi bytes per chip */
 	chipnum=from>>3;
 	ofs=from & 7;
 
-
-	*retlen = 0;
-
 	while (len) {
 		unsigned long thislen;
 
@@ -1127,7 +1247,7 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip,
 		return ret;
 	}
 
-	DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n",
+	pr_debug("MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n",
 	       __func__, adr, datum.x[0] );
 
 	/*
@@ -1138,7 +1258,7 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip,
 	 */
 	oldd = map_read(map, adr);
 	if (map_word_equal(map, oldd, datum)) {
-		DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): NOP\n",
+		pr_debug("MTD %s(): NOP\n",
 		       __func__);
 		goto op_done;
 	}
@@ -1201,6 +1321,7 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip,
 	xip_enable(map, chip, adr);
  op_done:
 	chip->state = FL_READY;
+	DISABLE_VPP(map);
 	put_chip(map, chip, adr);
 	mutex_unlock(&chip->mutex);
 
@@ -1218,10 +1339,6 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len,
 	unsigned long ofs, chipstart;
 	DECLARE_WAITQUEUE(wait, current);
 
-	*retlen = 0;
-	if (!len)
-		return 0;
-
 	chipnum = to >> cfi->chipshift;
 	ofs = to  - (chipnum << cfi->chipshift);
 	chipstart = cfi->chips[chipnum].start;
@@ -1237,9 +1354,6 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len,
 		mutex_lock(&cfi->chips[chipnum].mutex);
 
 		if (cfi->chips[chipnum].state != FL_READY) {
-#if 0
-			printk(KERN_DEBUG "Waiting for chip to write, status = %d\n", cfi->chips[chipnum].state);
-#endif
 			set_current_state(TASK_UNINTERRUPTIBLE);
 			add_wait_queue(&cfi->chips[chipnum].wq, &wait);
 
@@ -1247,10 +1361,6 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len,
 
 			schedule();
 			remove_wait_queue(&cfi->chips[chipnum].wq, &wait);
-#if 0
-			if(signal_pending(current))
-				return -EINTR;
-#endif
 			goto retry;
 		}
 
@@ -1315,9 +1425,6 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len,
 		mutex_lock(&cfi->chips[chipnum].mutex);
 
 		if (cfi->chips[chipnum].state != FL_READY) {
-#if 0
-			printk(KERN_DEBUG "Waiting for chip to write, status = %d\n", cfi->chips[chipnum].state);
-#endif
 			set_current_state(TASK_UNINTERRUPTIBLE);
 			add_wait_queue(&cfi->chips[chipnum].wq, &wait);
 
@@ -1325,10 +1432,6 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len,
 
 			schedule();
 			remove_wait_queue(&cfi->chips[chipnum].wq, &wait);
-#if 0
-			if(signal_pending(current))
-				return -EINTR;
-#endif
 			goto retry1;
 		}
 
@@ -1378,7 +1481,7 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
 
 	datum = map_word_load(map, buf);
 
-	DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n",
+	pr_debug("MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n",
 	       __func__, adr, datum.x[0] );
 
 	XIP_INVAL_CACHED_RANGE(map, adr, len);
@@ -1387,7 +1490,6 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
 
 	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
 	cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
-	//cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
 
 	/* Write Buffer Load */
 	map_write(map, CMD(0x25), cmd_adr);
@@ -1447,17 +1549,30 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
 		UDELAY(map, chip, adr, 1);
 	}
 
-	/* reset on all failures. */
-	map_write( map, CMD(0xF0), chip->start );
+	/*
+	 * Recovery from write-buffer programming failures requires
+	 * the write-to-buffer-reset sequence.  Since the last part
+	 * of the sequence also works as a normal reset, we can run
+	 * the same commands regardless of why we are here.
+	 * See e.g.
+	 * http://www.spansion.com/Support/Application%20Notes/MirrorBit_Write_Buffer_Prog_Page_Buffer_Read_AN.pdf
+	 */
+	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi,
+			 cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi,
+			 cfi->device_type, NULL);
+	cfi_send_gen_cmd(0xF0, cfi->addr_unlock1, chip->start, map, cfi,
+			 cfi->device_type, NULL);
 	xip_enable(map, chip, adr);
 	/* FIXME - should have reset delay before continuing */
 
-	printk(KERN_WARNING "MTD %s(): software timeout\n",
-	       __func__ );
+	printk(KERN_WARNING "MTD %s(): software timeout, address:0x%.8lx.\n",
+	       __func__, adr);
 
 	ret = -EIO;
  op_done:
 	chip->state = FL_READY;
+	DISABLE_VPP(map);
 	put_chip(map, chip, adr);
 	mutex_unlock(&chip->mutex);
 
@@ -1475,10 +1590,6 @@ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
 	int chipnum;
 	unsigned long ofs;
 
-	*retlen = 0;
-	if (!len)
-		return 0;
-
 	chipnum = to >> cfi->chipshift;
 	ofs = to  - (chipnum << cfi->chipshift);
 
@@ -1544,6 +1655,238 @@ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
 	return 0;
 }
 
+/*
+ * Wait for the flash chip to become ready to write data
+ *
+ * This is only called during the panic_write() path. When panic_write()
+ * is called, the kernel is in the process of a panic, and will soon be
+ * dead. Therefore we don't take any locks, and attempt to get access
+ * to the chip as soon as possible.
+ */
+static int cfi_amdstd_panic_wait(struct map_info *map, struct flchip *chip,
+				 unsigned long adr)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	int retries = 10;
+	int i;
+
+	/*
+	 * If the driver thinks the chip is idle, and no toggle bits
+	 * are changing, then the chip is actually idle for sure.
+	 */
+	if (chip->state == FL_READY && chip_ready(map, adr))
+		return 0;
+
+	/*
+	 * Try several times to reset the chip and then wait for it
+	 * to become idle. The upper limit of a few milliseconds of
+	 * delay isn't a big problem: the kernel is dying anyway. It
+	 * is more important to save the messages.
+	 */
+	while (retries > 0) {
+		const unsigned long timeo = (HZ / 1000) + 1;
+
+		/* send the reset command */
+		map_write(map, CMD(0xF0), chip->start);
+
+		/* wait for the chip to become ready */
+		for (i = 0; i < jiffies_to_usecs(timeo); i++) {
+			if (chip_ready(map, adr))
+				return 0;
+
+			udelay(1);
+		}
+	}
+
+	/* the chip never became ready */
+	return -EBUSY;
+}
+
+/*
+ * Write out one word of data to a single flash chip during a kernel panic
+ *
+ * This is only called during the panic_write() path. When panic_write()
+ * is called, the kernel is in the process of a panic, and will soon be
+ * dead. Therefore we don't take any locks, and attempt to get access
+ * to the chip as soon as possible.
+ *
+ * The implementation of this routine is intentionally similar to
+ * do_write_oneword(), in order to ease code maintenance.
+ */
+static int do_panic_write_oneword(struct map_info *map, struct flchip *chip,
+				  unsigned long adr, map_word datum)
+{
+	const unsigned long uWriteTimeout = (HZ / 1000) + 1;
+	struct cfi_private *cfi = map->fldrv_priv;
+	int retry_cnt = 0;
+	map_word oldd;
+	int ret = 0;
+	int i;
+
+	adr += chip->start;
+
+	ret = cfi_amdstd_panic_wait(map, chip, adr);
+	if (ret)
+		return ret;
+
+	pr_debug("MTD %s(): PANIC WRITE 0x%.8lx(0x%.8lx)\n",
+			__func__, adr, datum.x[0]);
+
+	/*
+	 * Check for a NOP for the case when the datum to write is already
+	 * present - it saves time and works around buggy chips that corrupt
+	 * data at other locations when 0xff is written to a location that
+	 * already contains 0xff.
+	 */
+	oldd = map_read(map, adr);
+	if (map_word_equal(map, oldd, datum)) {
+		pr_debug("MTD %s(): NOP\n", __func__);
+		goto op_done;
+	}
+
+	ENABLE_VPP(map);
+
+retry:
+	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+	map_write(map, datum, adr);
+
+	for (i = 0; i < jiffies_to_usecs(uWriteTimeout); i++) {
+		if (chip_ready(map, adr))
+			break;
+
+		udelay(1);
+	}
+
+	if (!chip_good(map, adr, datum)) {
+		/* reset on all failures. */
+		map_write(map, CMD(0xF0), chip->start);
+		/* FIXME - should have reset delay before continuing */
+
+		if (++retry_cnt <= MAX_WORD_RETRIES)
+			goto retry;
+
+		ret = -EIO;
+	}
+
+op_done:
+	DISABLE_VPP(map);
+	return ret;
+}
+
+/*
+ * Write out some data during a kernel panic
+ *
+ * This is used by the mtdoops driver to save the dying messages from a
+ * kernel which has panic'd.
+ *
+ * This routine ignores all of the locking used throughout the rest of the
+ * driver, in order to ensure that the data gets written out no matter what
+ * state this driver (and the flash chip itself) was in when the kernel crashed.
+ *
+ * The implementation of this routine is intentionally similar to
+ * cfi_amdstd_write_words(), in order to ease code maintenance.
+ */
+static int cfi_amdstd_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
+				  size_t *retlen, const u_char *buf)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	unsigned long ofs, chipstart;
+	int ret = 0;
+	int chipnum;
+
+	chipnum = to >> cfi->chipshift;
+	ofs = to - (chipnum << cfi->chipshift);
+	chipstart = cfi->chips[chipnum].start;
+
+	/* If it's not bus aligned, do the first byte write */
+	if (ofs & (map_bankwidth(map) - 1)) {
+		unsigned long bus_ofs = ofs & ~(map_bankwidth(map) - 1);
+		int i = ofs - bus_ofs;
+		int n = 0;
+		map_word tmp_buf;
+
+		ret = cfi_amdstd_panic_wait(map, &cfi->chips[chipnum], bus_ofs);
+		if (ret)
+			return ret;
+
+		/* Load 'tmp_buf' with old contents of flash */
+		tmp_buf = map_read(map, bus_ofs + chipstart);
+
+		/* Number of bytes to copy from buffer */
+		n = min_t(int, len, map_bankwidth(map) - i);
+
+		tmp_buf = map_word_load_partial(map, tmp_buf, buf, i, n);
+
+		ret = do_panic_write_oneword(map, &cfi->chips[chipnum],
+					     bus_ofs, tmp_buf);
+		if (ret)
+			return ret;
+
+		ofs += n;
+		buf += n;
+		(*retlen) += n;
+		len -= n;
+
+		if (ofs >> cfi->chipshift) {
+			chipnum++;
+			ofs = 0;
+			if (chipnum == cfi->numchips)
+				return 0;
+		}
+	}
+
+	/* We are now aligned, write as much as possible */
+	while (len >= map_bankwidth(map)) {
+		map_word datum;
+
+		datum = map_word_load(map, buf);
+
+		ret = do_panic_write_oneword(map, &cfi->chips[chipnum],
+					     ofs, datum);
+		if (ret)
+			return ret;
+
+		ofs += map_bankwidth(map);
+		buf += map_bankwidth(map);
+		(*retlen) += map_bankwidth(map);
+		len -= map_bankwidth(map);
+
+		if (ofs >> cfi->chipshift) {
+			chipnum++;
+			ofs = 0;
+			if (chipnum == cfi->numchips)
+				return 0;
+
+			chipstart = cfi->chips[chipnum].start;
+		}
+	}
+
+	/* Write the trailing bytes if any */
+	if (len & (map_bankwidth(map) - 1)) {
+		map_word tmp_buf;
+
+		ret = cfi_amdstd_panic_wait(map, &cfi->chips[chipnum], ofs);
+		if (ret)
+			return ret;
+
+		tmp_buf = map_read(map, ofs + chipstart);
+
+		tmp_buf = map_word_load_partial(map, tmp_buf, buf, 0, len);
+
+		ret = do_panic_write_oneword(map, &cfi->chips[chipnum],
+					     ofs, tmp_buf);
+		if (ret)
+			return ret;
+
+		(*retlen) += len;
+	}
+
+	return 0;
+}
+
 
 /*
  * Handle devices with one erase region, that only implement
@@ -1566,7 +1909,7 @@ static int __xipram do_erase_chip(struct map_info *map, struct flchip *chip)
 		return ret;
 	}
 
-	DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): ERASE 0x%.8lx\n",
+	pr_debug("MTD %s(): ERASE 0x%.8lx\n",
 	       __func__, chip->start );
 
 	XIP_INVAL_CACHED_RANGE(map, adr, map->size);
@@ -1631,6 +1974,7 @@ static int __xipram do_erase_chip(struct map_info *map, struct flchip *chip)
 
 	chip->state = FL_READY;
 	xip_enable(map, chip, adr);
+	DISABLE_VPP(map);
 	put_chip(map, chip, adr);
 	mutex_unlock(&chip->mutex);
 
@@ -1654,7 +1998,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
 		return ret;
 	}
 
-	DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): ERASE 0x%.8lx\n",
+	pr_debug("MTD %s(): ERASE 0x%.8lx\n",
 	       __func__, adr );
 
 	XIP_INVAL_CACHED_RANGE(map, adr, len);
@@ -1666,7 +2010,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
 	cfi_send_gen_cmd(0x80, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
 	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
 	cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
-	map_write(map, CMD(0x30), adr);
+	map_write(map, cfi->sector_erase_cmd, adr);
 
 	chip->state = FL_ERASING;
 	chip->erase_suspended = 0;
@@ -1721,6 +2065,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
 	}
 
 	chip->state = FL_READY;
+	DISABLE_VPP(map);
 	put_chip(map, chip, adr);
 	mutex_unlock(&chip->mutex);
 	return ret;
@@ -1780,8 +2125,7 @@ static int do_atmel_lock(struct map_info *map, struct flchip *chip,
 		goto out_unlock;
 	chip->state = FL_LOCKING;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "MTD %s(): LOCK 0x%08lx len %d\n",
-	      __func__, adr, len);
+	pr_debug("MTD %s(): LOCK 0x%08lx len %d\n", __func__, adr, len);
 
 	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi,
 			 cfi->device_type, NULL);
@@ -1816,8 +2160,7 @@ static int do_atmel_unlock(struct map_info *map, struct flchip *chip,
 		goto out_unlock;
 	chip->state = FL_UNLOCKING;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "MTD %s(): LOCK 0x%08lx len %d\n",
-	      __func__, adr, len);
+	pr_debug("MTD %s(): LOCK 0x%08lx len %d\n", __func__, adr, len);
 
 	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi,
 			 cfi->device_type, NULL);
@@ -1842,6 +2185,205 @@ static int cfi_atmel_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 	return cfi_varsize_frob(mtd, do_atmel_unlock, ofs, len, NULL);
 }
 
+/*
+ * Advanced Sector Protection - PPB (Persistent Protection Bit) locking
+ */
+
+struct ppb_lock {
+	struct flchip *chip;
+	loff_t offset;
+	int locked;
+};
+
+#define MAX_SECTORS			512
+
+#define DO_XXLOCK_ONEBLOCK_LOCK		((void *)1)
+#define DO_XXLOCK_ONEBLOCK_UNLOCK	((void *)2)
+#define DO_XXLOCK_ONEBLOCK_GETLOCK	((void *)3)
+
+static int __maybe_unused do_ppb_xxlock(struct map_info *map,
+					struct flchip *chip,
+					unsigned long adr, int len, void *thunk)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	unsigned long timeo;
+	int ret;
+
+	mutex_lock(&chip->mutex);
+	ret = get_chip(map, chip, adr + chip->start, FL_LOCKING);
+	if (ret) {
+		mutex_unlock(&chip->mutex);
+		return ret;
+	}
+
+	pr_debug("MTD %s(): XXLOCK 0x%08lx len %d\n", __func__, adr, len);
+
+	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi,
+			 cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi,
+			 cfi->device_type, NULL);
+	/* PPB entry command */
+	cfi_send_gen_cmd(0xC0, cfi->addr_unlock1, chip->start, map, cfi,
+			 cfi->device_type, NULL);
+
+	if (thunk == DO_XXLOCK_ONEBLOCK_LOCK) {
+		chip->state = FL_LOCKING;
+		map_write(map, CMD(0xA0), chip->start + adr);
+		map_write(map, CMD(0x00), chip->start + adr);
+	} else if (thunk == DO_XXLOCK_ONEBLOCK_UNLOCK) {
+		/*
+		 * Unlocking of one specific sector is not supported, so we
+		 * have to unlock all sectors of this device instead
+		 */
+		chip->state = FL_UNLOCKING;
+		map_write(map, CMD(0x80), chip->start);
+		map_write(map, CMD(0x30), chip->start);
+	} else if (thunk == DO_XXLOCK_ONEBLOCK_GETLOCK) {
+		chip->state = FL_JEDEC_QUERY;
+		/* Return locked status: 0->locked, 1->unlocked */
+		ret = !cfi_read_query(map, adr);
+	} else
+		BUG();
+
+	/*
+	 * Wait for some time as unlocking of all sectors takes quite long
+	 */
+	timeo = jiffies + msecs_to_jiffies(2000);	/* 2s max (un)locking */
+	for (;;) {
+		if (chip_ready(map, adr))
+			break;
+
+		if (time_after(jiffies, timeo)) {
+			printk(KERN_ERR "Waiting for chip to be ready timed out.\n");
+			ret = -EIO;
+			break;
+		}
+
+		UDELAY(map, chip, adr, 1);
+	}
+
+	/* Exit BC commands */
+	map_write(map, CMD(0x90), chip->start);
+	map_write(map, CMD(0x00), chip->start);
+
+	chip->state = FL_READY;
+	put_chip(map, chip, adr + chip->start);
+	mutex_unlock(&chip->mutex);
+
+	return ret;
+}
+
+static int __maybe_unused cfi_ppb_lock(struct mtd_info *mtd, loff_t ofs,
+				       uint64_t len)
+{
+	return cfi_varsize_frob(mtd, do_ppb_xxlock, ofs, len,
+				DO_XXLOCK_ONEBLOCK_LOCK);
+}
+
+static int __maybe_unused cfi_ppb_unlock(struct mtd_info *mtd, loff_t ofs,
+					 uint64_t len)
+{
+	struct mtd_erase_region_info *regions = mtd->eraseregions;
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	struct ppb_lock *sect;
+	unsigned long adr;
+	loff_t offset;
+	uint64_t length;
+	int chipnum;
+	int i;
+	int sectors;
+	int ret;
+
+	/*
+	 * PPB unlocking always unlocks all sectors of the flash chip.
+	 * We need to re-lock all previously locked sectors. So lets
+	 * first check the locking status of all sectors and save
+	 * it for future use.
+	 */
+	sect = kzalloc(MAX_SECTORS * sizeof(struct ppb_lock), GFP_KERNEL);
+	if (!sect)
+		return -ENOMEM;
+
+	/*
+	 * This code to walk all sectors is a slightly modified version
+	 * of the cfi_varsize_frob() code.
+	 */
+	i = 0;
+	chipnum = 0;
+	adr = 0;
+	sectors = 0;
+	offset = 0;
+	length = mtd->size;
+
+	while (length) {
+		int size = regions[i].erasesize;
+
+		/*
+		 * Only test sectors that shall not be unlocked. The other
+		 * sectors shall be unlocked, so lets keep their locking
+		 * status at "unlocked" (locked=0) for the final re-locking.
+		 */
+		if ((adr < ofs) || (adr >= (ofs + len))) {
+			sect[sectors].chip = &cfi->chips[chipnum];
+			sect[sectors].offset = offset;
+			sect[sectors].locked = do_ppb_xxlock(
+				map, &cfi->chips[chipnum], adr, 0,
+				DO_XXLOCK_ONEBLOCK_GETLOCK);
+		}
+
+		adr += size;
+		offset += size;
+		length -= size;
+
+		if (offset == regions[i].offset + size * regions[i].numblocks)
+			i++;
+
+		if (adr >> cfi->chipshift) {
+			adr = 0;
+			chipnum++;
+
+			if (chipnum >= cfi->numchips)
+				break;
+		}
+
+		sectors++;
+		if (sectors >= MAX_SECTORS) {
+			printk(KERN_ERR "Only %d sectors for PPB locking supported!\n",
+			       MAX_SECTORS);
+			kfree(sect);
+			return -EINVAL;
+		}
+	}
+
+	/* Now unlock the whole chip */
+	ret = cfi_varsize_frob(mtd, do_ppb_xxlock, ofs, len,
+			       DO_XXLOCK_ONEBLOCK_UNLOCK);
+	if (ret) {
+		kfree(sect);
+		return ret;
+	}
+
+	/*
+	 * PPB unlocking always unlocks all sectors of the flash chip.
+	 * We need to re-lock all previously locked sectors.
+	 */
+	for (i = 0; i < sectors; i++) {
+		if (sect[i].locked)
+			do_ppb_xxlock(map, sect[i].chip, sect[i].offset, 0,
+				      DO_XXLOCK_ONEBLOCK_LOCK);
+	}
+
+	kfree(sect);
+	return ret;
+}
+
+static int __maybe_unused cfi_ppb_is_locked(struct mtd_info *mtd, loff_t ofs,
+					    uint64_t len)
+{
+	return cfi_varsize_frob(mtd, do_ppb_xxlock, ofs, len,
+				DO_XXLOCK_ONEBLOCK_GETLOCK) ? 1 : 0;
+}
 
 static void cfi_amdstd_sync (struct mtd_info *mtd)
 {
diff --git a/drivers/mtd/chips/cfi_cmdset_0020.c b/drivers/mtd/chips/cfi_cmdset_0020.c
index e54e8c169d7..423666b51ef 100644
--- a/drivers/mtd/chips/cfi_cmdset_0020.c
+++ b/drivers/mtd/chips/cfi_cmdset_0020.c
@@ -22,7 +22,6 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
-#include <linux/init.h>
 #include <asm/io.h>
 #include <asm/byteorder.h>
 
@@ -33,7 +32,6 @@
 #include <linux/mtd/map.h>
 #include <linux/mtd/cfi.h>
 #include <linux/mtd/mtd.h>
-#include <linux/mtd/compatmac.h>
 
 
 static int cfi_staa_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *);
@@ -140,8 +138,9 @@ struct mtd_info *cfi_cmdset_0020(struct map_info *map, int primary)
 		}
 
 		/* Do some byteswapping if necessary */
-		extp->FeatureSupport = cfi32_to_cpu(extp->FeatureSupport);
-		extp->BlkStatusRegMask = cfi32_to_cpu(extp->BlkStatusRegMask);
+		extp->FeatureSupport = cfi32_to_cpu(map, extp->FeatureSupport);
+		extp->BlkStatusRegMask = cfi32_to_cpu(map,
+						extp->BlkStatusRegMask);
 
 #ifdef DEBUG_CFI_FEATURES
 		/* Tell the user about it in lots of lovely detail */
@@ -176,7 +175,6 @@ static struct mtd_info *cfi_staa_setup(struct map_info *map)
 	//printk(KERN_DEBUG "number of CFI chips: %d\n", cfi->numchips);
 
 	if (!mtd) {
-		printk(KERN_ERR "Failed to allocate memory for MTD device\n");
 		kfree(cfi->cmdset_priv);
 		return NULL;
 	}
@@ -189,7 +187,6 @@ static struct mtd_info *cfi_staa_setup(struct map_info *map)
 	mtd->eraseregions = kmalloc(sizeof(struct mtd_erase_region_info)
 			* mtd->numeraseregions, GFP_KERNEL);
 	if (!mtd->eraseregions) {
-		printk(KERN_ERR "Failed to allocate memory for MTD erase region info\n");
 		kfree(cfi->cmdset_priv);
 		kfree(mtd);
 		return NULL;
@@ -228,17 +225,18 @@ static struct mtd_info *cfi_staa_setup(struct map_info *map)
 		}
 
 	/* Also select the correct geometry setup too */
-	mtd->erase = cfi_staa_erase_varsize;
-	mtd->read = cfi_staa_read;
-        mtd->write = cfi_staa_write_buffers;
-	mtd->writev = cfi_staa_writev;
-	mtd->sync = cfi_staa_sync;
-	mtd->lock = cfi_staa_lock;
-	mtd->unlock = cfi_staa_unlock;
-	mtd->suspend = cfi_staa_suspend;
-	mtd->resume = cfi_staa_resume;
+	mtd->_erase = cfi_staa_erase_varsize;
+	mtd->_read = cfi_staa_read;
+	mtd->_write = cfi_staa_write_buffers;
+	mtd->_writev = cfi_staa_writev;
+	mtd->_sync = cfi_staa_sync;
+	mtd->_lock = cfi_staa_lock;
+	mtd->_unlock = cfi_staa_unlock;
+	mtd->_suspend = cfi_staa_suspend;
+	mtd->_resume = cfi_staa_resume;
 	mtd->flags = MTD_CAP_NORFLASH & ~MTD_BIT_WRITEABLE;
 	mtd->writesize = 8; /* FIXME: Should be 0 for STMicro flashes w/out ECC */
+	mtd->writebufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize;
 	map->fldrv = &cfi_staa_chipdrv;
 	__module_get(THIS_MODULE);
 	mtd->name = map->name;
@@ -296,6 +294,7 @@ static inline int do_read_onechip(struct map_info *map, struct flchip *chip, lof
 				/* make sure we're in 'read status' mode */
 				map_write(map, CMD(0x70), cmd_addr);
 				chip->state = FL_ERASING;
+				wake_up(&chip->wq);
 				mutex_unlock(&chip->mutex);
 				printk(KERN_ERR "Chip not ready after erase "
 				       "suspended: status = 0x%lx\n", status.x[0]);
@@ -392,8 +391,6 @@ static int cfi_staa_read (struct mtd_info *mtd, loff_t from, size_t len, size_t
 	chipnum = (from >> cfi->chipshift);
 	ofs = from - (chipnum <<  cfi->chipshift);
 
-	*retlen = 0;
-
 	while (len) {
 		unsigned long thislen;
 
@@ -615,10 +612,6 @@ static int cfi_staa_write_buffers (struct mtd_info *mtd, loff_t to,
 	int chipnum;
 	unsigned long ofs;
 
-	*retlen = 0;
-	if (!len)
-		return 0;
-
 	chipnum = to >> cfi->chipshift;
 	ofs = to  - (chipnum << cfi->chipshift);
 
@@ -697,7 +690,8 @@ cfi_staa_writev(struct mtd_info *mtd, const struct kvec *vecs,
 				continue;
 			}
 			memcpy(buffer+buflen, elem_base, ECCBUF_SIZE-buflen);
-			ret = mtd->write(mtd, to, ECCBUF_SIZE, &thislen, buffer);
+			ret = mtd_write(mtd, to, ECCBUF_SIZE, &thislen,
+					buffer);
 			totlen += thislen;
 			if (ret || thislen != ECCBUF_SIZE)
 				goto write_error;
@@ -706,7 +700,8 @@ cfi_staa_writev(struct mtd_info *mtd, const struct kvec *vecs,
 			to += ECCBUF_SIZE;
 		}
 		if (ECCBUF_DIV(elem_len)) { /* write clean aligned data */
-			ret = mtd->write(mtd, to, ECCBUF_DIV(elem_len), &thislen, elem_base);
+			ret = mtd_write(mtd, to, ECCBUF_DIV(elem_len),
+					&thislen, elem_base);
 			totlen += thislen;
 			if (ret || thislen != ECCBUF_DIV(elem_len))
 				goto write_error;
@@ -720,7 +715,7 @@ cfi_staa_writev(struct mtd_info *mtd, const struct kvec *vecs,
 	}
 	if (buflen) { /* flush last page, even if not full */
 		/* This is sometimes intended behaviour, really */
-		ret = mtd->write(mtd, to, buflen, &thislen, buffer);
+		ret = mtd_write(mtd, to, buflen, &thislen, buffer);
 		totlen += thislen;
 		if (ret || thislen != ECCBUF_SIZE)
 			goto write_error;
@@ -900,12 +895,6 @@ static int cfi_staa_erase_varsize(struct mtd_info *mtd,
 	int i, first;
 	struct mtd_erase_region_info *regions = mtd->eraseregions;
 
-	if (instr->addr > mtd->size)
-		return -EINVAL;
-
-	if ((instr->len + instr->addr) > mtd->size)
-		return -EINVAL;
-
 	/* Check that both start and end of the requested erase are
 	 * aligned with the erasesize at the appropriate addresses.
 	 */
@@ -972,7 +961,7 @@ static int cfi_staa_erase_varsize(struct mtd_info *mtd,
 			chipnum++;
 
 			if (chipnum >= cfi->numchips)
-			break;
+				break;
 		}
 	}
 
@@ -1151,9 +1140,6 @@ static int cfi_staa_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 	if (len & (mtd->erasesize -1))
 		return -EINVAL;
 
-	if ((len + ofs) > mtd->size)
-		return -EINVAL;
-
 	chipnum = ofs >> cfi->chipshift;
 	adr = ofs - (chipnum << cfi->chipshift);
 
@@ -1184,7 +1170,7 @@ static int cfi_staa_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 			chipnum++;
 
 			if (chipnum >= cfi->numchips)
-			break;
+				break;
 		}
 	}
 	return 0;
diff --git a/drivers/mtd/chips/cfi_probe.c b/drivers/mtd/chips/cfi_probe.c
index b2acd32f4fb..e8d0164498b 100644
--- a/drivers/mtd/chips/cfi_probe.c
+++ b/drivers/mtd/chips/cfi_probe.c
@@ -168,15 +168,15 @@ static int __xipram cfi_chip_setup(struct map_info *map,
 		return 0;
 
 	cfi->cfiq = kmalloc(sizeof(struct cfi_ident) + num_erase_regions * 4, GFP_KERNEL);
-	if (!cfi->cfiq) {
-		printk(KERN_WARNING "%s: kmalloc failed for CFI ident structure\n", map->name);
+	if (!cfi->cfiq)
 		return 0;
-	}
 
 	memset(cfi->cfiq,0,sizeof(struct cfi_ident));
 
 	cfi->cfi_mode = CFI_MODE_CFI;
 
+	cfi->sector_erase_cmd = CMD(0x30);
+
 	/* Read the CFI info structure */
 	xip_disable_qry(base, map, cfi);
 	for (i=0; i<(sizeof(struct cfi_ident) + num_erase_regions * 4); i++)
@@ -235,9 +235,9 @@ static int __xipram cfi_chip_setup(struct map_info *map,
 	cfi_qry_mode_off(base, map, cfi);
 	xip_allowed(base, map);
 
-	printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n",
+	printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank. Manufacturer ID %#08x Chip ID %#08x\n",
 	       map->name, cfi->interleave, cfi->device_type*8, base,
-	       map->bankwidth*8);
+	       map->bankwidth*8, cfi->mfr, cfi->id);
 
 	return 1;
 }
diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c
index d7c2c672757..09c79bd0b4f 100644
--- a/drivers/mtd/chips/cfi_util.c
+++ b/drivers/mtd/chips/cfi_util.c
@@ -1,6 +1,6 @@
 /*
  * Common Flash Interface support:
- *   Generic utility functions not dependant on command set
+ *   Generic utility functions not dependent on command set
  *
  * Copyright (C) 2002 Red Hat
  * Copyright (C) 2003 STMicroelectronics Limited
@@ -22,7 +22,6 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/cfi.h>
-#include <linux/mtd/compatmac.h>
 
 int __xipram cfi_qry_present(struct map_info *map, __u32 base,
 			     struct cfi_private *cfi)
@@ -78,6 +77,13 @@ int __xipram cfi_qry_mode_on(uint32_t base, struct map_info *map,
 	cfi_send_gen_cmd(0x98, 0x5555, base, map, cfi, cfi->device_type, NULL);
 	if (cfi_qry_present(map, base, cfi))
 		return 1;
+	/* SST 39VF640xB */
+	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0xAA, 0x555, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x55, 0x2AA, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x98, 0x555, base, map, cfi, cfi->device_type, NULL);
+	if (cfi_qry_present(map, base, cfi))
+		return 1;
 	/* QRY not found */
 	return 0;
 }
@@ -110,10 +116,8 @@ __xipram cfi_read_pri(struct map_info *map, __u16 adr, __u16 size, const char* n
 	printk(KERN_INFO "%s Extended Query Table at 0x%4.4X\n", name, adr);
 
 	extp = kmalloc(size, GFP_KERNEL);
-	if (!extp) {
-		printk(KERN_ERR "Failed to allocate memory\n");
+	if (!extp)
 		goto out;
-	}
 
 #ifdef CONFIG_MTD_XIP
 	local_irq_disable();
@@ -150,7 +154,7 @@ void cfi_fixup(struct mtd_info *mtd, struct cfi_fixup *fixups)
 	for (f=fixups; f->fixup; f++) {
 		if (((f->mfr == CFI_MFR_ANY) || (f->mfr == cfi->mfr)) &&
 		    ((f->id  == CFI_ID_ANY)  || (f->id  == cfi->id))) {
-			f->fixup(mtd, f->param);
+			f->fixup(mtd);
 		}
 	}
 }
@@ -167,12 +171,6 @@ int cfi_varsize_frob(struct mtd_info *mtd, varsize_frob_t frob,
 	int i, first;
 	struct mtd_erase_region_info *regions = mtd->eraseregions;
 
-	if (ofs > mtd->size)
-		return -EINVAL;
-
-	if ((len + ofs) > mtd->size)
-		return -EINVAL;
-
 	/* Check that both start and end of the requested erase are
 	 * aligned with the erasesize at the appropriate addresses.
 	 */
@@ -241,7 +239,7 @@ int cfi_varsize_frob(struct mtd_info *mtd, varsize_frob_t frob,
 			chipnum++;
 
 			if (chipnum >= cfi->numchips)
-			break;
+				break;
 		}
 	}
 
diff --git a/drivers/mtd/chips/chipreg.c b/drivers/mtd/chips/chipreg.c
index c8576096822..0bbc61ba952 100644
--- a/drivers/mtd/chips/chipreg.c
+++ b/drivers/mtd/chips/chipreg.c
@@ -10,7 +10,6 @@
 #include <linux/slab.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/mtd.h>
-#include <linux/mtd/compatmac.h>
 
 static DEFINE_SPINLOCK(chip_drvs_lock);
 static LIST_HEAD(chip_drvs_list);
@@ -77,10 +76,7 @@ struct mtd_info *do_map_probe(const char *name, struct map_info *map)
 	*/
 	module_put(drv->module);
 
-	if (ret)
-		return ret;
-
-	return NULL;
+	return ret;
 }
 /*
  * Destroy an MTD device which was created for a map device.
diff --git a/drivers/mtd/chips/fwh_lock.h b/drivers/mtd/chips/fwh_lock.h
index d1806497719..800b0e853e8 100644
--- a/drivers/mtd/chips/fwh_lock.h
+++ b/drivers/mtd/chips/fwh_lock.h
@@ -34,8 +34,7 @@ static int fwh_xxlock_oneblock(struct map_info *map, struct flchip *chip,
 
 	/* Refuse the operation if the we cannot look behind the chip */
 	if (chip->start < 0x400000) {
-		DEBUG( MTD_DEBUG_LEVEL3,
-			"MTD %s(): chip->start: %lx wanted >= 0x400000\n",
+		pr_debug( "MTD %s(): chip->start: %lx wanted >= 0x400000\n",
 			__func__, chip->start );
 		return -EIO;
 	}
@@ -98,11 +97,11 @@ static int fwh_unlock_varsize(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 	return ret;
 }
 
-static void fixup_use_fwh_lock(struct mtd_info *mtd, void *param)
+static void fixup_use_fwh_lock(struct mtd_info *mtd)
 {
 	printk(KERN_NOTICE "using fwh lock/unlock method\n");
 	/* Setup for the chips with the fwh lock method */
-	mtd->lock   = fwh_lock_varsize;
-	mtd->unlock = fwh_unlock_varsize;
+	mtd->_lock   = fwh_lock_varsize;
+	mtd->_unlock = fwh_unlock_varsize;
 }
 #endif /* FWH_LOCK_H */
diff --git a/drivers/mtd/chips/gen_probe.c b/drivers/mtd/chips/gen_probe.c
index 3b9a2843c5f..b57ceea2151 100644
--- a/drivers/mtd/chips/gen_probe.c
+++ b/drivers/mtd/chips/gen_probe.c
@@ -114,7 +114,6 @@ static struct cfi_private *genprobe_ident_chips(struct map_info *map, struct chi
 	mapsize = sizeof(long) * DIV_ROUND_UP(max_chips, BITS_PER_LONG);
 	chip_map = kzalloc(mapsize, GFP_KERNEL);
 	if (!chip_map) {
-		printk(KERN_WARNING "%s: kmalloc failed for CFI chip map\n", map->name);
 		kfree(cfi.cfiq);
 		return NULL;
 	}
@@ -139,7 +138,6 @@ static struct cfi_private *genprobe_ident_chips(struct map_info *map, struct chi
 	retcfi = kmalloc(sizeof(struct cfi_private) + cfi.numchips * sizeof(struct flchip), GFP_KERNEL);
 
 	if (!retcfi) {
-		printk(KERN_WARNING "%s: kmalloc failed for CFI private structure\n", map->name);
 		kfree(cfi.cfiq);
 		kfree(chip_map);
 		return NULL;
@@ -204,14 +202,14 @@ static inline struct mtd_info *cfi_cmdset_unknown(struct map_info *map,
 	struct cfi_private *cfi = map->fldrv_priv;
 	__u16 type = primary?cfi->cfiq->P_ID:cfi->cfiq->A_ID;
 #ifdef CONFIG_MODULES
-	char probename[16+sizeof(MODULE_SYMBOL_PREFIX)];
+	char probename[sizeof(VMLINUX_SYMBOL_STR(cfi_cmdset_%4.4X))];
 	cfi_cmdset_fn_t *probe_function;
 
-	sprintf(probename, MODULE_SYMBOL_PREFIX "cfi_cmdset_%4.4X", type);
+	sprintf(probename, VMLINUX_SYMBOL_STR(cfi_cmdset_%4.4X), type);
 
 	probe_function = __symbol_get(probename);
 	if (!probe_function) {
-		request_module(probename + sizeof(MODULE_SYMBOL_PREFIX) - 1);
+		request_module("cfi_cmdset_%4.4X", type);
 		probe_function = __symbol_get(probename);
 	}
 
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index d72a5fb2d04..7c0b27d132b 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -120,7 +120,7 @@
 #define PM49FL008	0x006A
 
 /* Sharp */
-#define LH28F640BF	0x00b0
+#define LH28F640BF	0x00B0
 
 /* ST - www.st.com */
 #define M29F800AB	0x0058
@@ -1299,13 +1299,14 @@ static const struct amd_flash_info jedec_table[] = {
 		.mfr_id		= CFI_MFR_SHARP,
 		.dev_id		= LH28F640BF,
 		.name		= "LH28F640BF",
-		.devtypes	= CFI_DEVICETYPE_X8,
+		.devtypes	= CFI_DEVICETYPE_X16,
 		.uaddr		= MTD_UADDR_UNNECESSARY,
-		.dev_size	= SIZE_4MiB,
-		.cmd_set	= P_ID_INTEL_STD,
-		.nr_regions	= 1,
+		.dev_size	= SIZE_8MiB,
+		.cmd_set	= P_ID_INTEL_EXT,
+		.nr_regions	= 2,
 		.regions	= {
-			ERASEINFO(0x40000,16),
+			ERASEINFO(0x10000, 127),
+			ERASEINFO(0x02000, 8),
 		}
 	}, {
 		.mfr_id		= CFI_MFR_SST,
@@ -1914,11 +1915,10 @@ static void jedec_reset(u32 base, struct map_info *map, struct cfi_private *cfi)
 	 * (oh and incidentaly the jedec spec - 3.5.3.3) the reset
 	 * sequence is *supposed* to be 0xaa at 0x5555, 0x55 at
 	 * 0x2aaa, 0xF0 at 0x5555 this will not affect the AMD chips
-	 * as they will ignore the writes and dont care what address
+	 * as they will ignore the writes and don't care what address
 	 * the F0 is written to */
 	if (cfi->addr_unlock1) {
-		DEBUG( MTD_DEBUG_LEVEL3,
-		       "reset unlock called %x %x \n",
+		pr_debug( "reset unlock called %x %x \n",
 		       cfi->addr_unlock1,cfi->addr_unlock2);
 		cfi_send_gen_cmd(0xaa, cfi->addr_unlock1, base, map, cfi, cfi->device_type, NULL);
 		cfi_send_gen_cmd(0x55, cfi->addr_unlock2, base, map, cfi, cfi->device_type, NULL);
@@ -1935,14 +1935,14 @@ static void jedec_reset(u32 base, struct map_info *map, struct cfi_private *cfi)
 }
 
 
-static int cfi_jedec_setup(struct cfi_private *p_cfi, int index)
+static int cfi_jedec_setup(struct map_info *map, struct cfi_private *cfi, int index)
 {
 	int i,num_erase_regions;
 	uint8_t uaddr;
 
-	if (! (jedec_table[index].devtypes & p_cfi->device_type)) {
-		DEBUG(MTD_DEBUG_LEVEL1, "Rejecting potential %s with incompatible %d-bit device type\n",
-		      jedec_table[index].name, 4 * (1<<p_cfi->device_type));
+	if (!(jedec_table[index].devtypes & cfi->device_type)) {
+		pr_debug("Rejecting potential %s with incompatible %d-bit device type\n",
+		      jedec_table[index].name, 4 * (1<<cfi->device_type));
 		return 0;
 	}
 
@@ -1950,27 +1950,28 @@ static int cfi_jedec_setup(struct cfi_private *p_cfi, int index)
 
 	num_erase_regions = jedec_table[index].nr_regions;
 
-	p_cfi->cfiq = kmalloc(sizeof(struct cfi_ident) + num_erase_regions * 4, GFP_KERNEL);
-	if (!p_cfi->cfiq) {
+	cfi->cfiq = kmalloc(sizeof(struct cfi_ident) + num_erase_regions * 4, GFP_KERNEL);
+	if (!cfi->cfiq) {
 		//xx printk(KERN_WARNING "%s: kmalloc failed for CFI ident structure\n", map->name);
 		return 0;
 	}
 
-	memset(p_cfi->cfiq,0,sizeof(struct cfi_ident));
+	memset(cfi->cfiq, 0, sizeof(struct cfi_ident));
 
-	p_cfi->cfiq->P_ID = jedec_table[index].cmd_set;
-	p_cfi->cfiq->NumEraseRegions = jedec_table[index].nr_regions;
-	p_cfi->cfiq->DevSize = jedec_table[index].dev_size;
-	p_cfi->cfi_mode = CFI_MODE_JEDEC;
+	cfi->cfiq->P_ID = jedec_table[index].cmd_set;
+	cfi->cfiq->NumEraseRegions = jedec_table[index].nr_regions;
+	cfi->cfiq->DevSize = jedec_table[index].dev_size;
+	cfi->cfi_mode = CFI_MODE_JEDEC;
+	cfi->sector_erase_cmd = CMD(0x30);
 
 	for (i=0; i<num_erase_regions; i++){
-		p_cfi->cfiq->EraseRegionInfo[i] = jedec_table[index].regions[i];
+		cfi->cfiq->EraseRegionInfo[i] = jedec_table[index].regions[i];
 	}
-	p_cfi->cmdset_priv = NULL;
+	cfi->cmdset_priv = NULL;
 
 	/* This may be redundant for some cases, but it doesn't hurt */
-	p_cfi->mfr = jedec_table[index].mfr_id;
-	p_cfi->id = jedec_table[index].dev_id;
+	cfi->mfr = jedec_table[index].mfr_id;
+	cfi->id = jedec_table[index].dev_id;
 
 	uaddr = jedec_table[index].uaddr;
 
@@ -1978,8 +1979,8 @@ static int cfi_jedec_setup(struct cfi_private *p_cfi, int index)
 	   our brains explode when we see the datasheets talking about address
 	   lines numbered from A-1 to A18. The CFI table has unlock addresses
 	   in device-words according to the mode the device is connected in */
-	p_cfi->addr_unlock1 = unlock_addrs[uaddr].addr1 / p_cfi->device_type;
-	p_cfi->addr_unlock2 = unlock_addrs[uaddr].addr2 / p_cfi->device_type;
+	cfi->addr_unlock1 = unlock_addrs[uaddr].addr1 / cfi->device_type;
+	cfi->addr_unlock2 = unlock_addrs[uaddr].addr2 / cfi->device_type;
 
 	return 1;	/* ok */
 }
@@ -2020,7 +2021,7 @@ static inline int jedec_match( uint32_t base,
 		 * there aren't.
 		 */
 		if (finfo->dev_id > 0xff) {
-			DEBUG( MTD_DEBUG_LEVEL3, "%s(): ID is not 8bit\n",
+			pr_debug("%s(): ID is not 8bit\n",
 			       __func__);
 			goto match_done;
 		}
@@ -2044,12 +2045,10 @@ static inline int jedec_match( uint32_t base,
 	}
 
 	/* the part size must fit in the memory window */
-	DEBUG( MTD_DEBUG_LEVEL3,
-	       "MTD %s(): Check fit 0x%.8x + 0x%.8x = 0x%.8x\n",
+	pr_debug("MTD %s(): Check fit 0x%.8x + 0x%.8x = 0x%.8x\n",
 	       __func__, base, 1 << finfo->dev_size, base + (1 << finfo->dev_size) );
 	if ( base + cfi_interleave(cfi) * ( 1 << finfo->dev_size ) > map->size ) {
-		DEBUG( MTD_DEBUG_LEVEL3,
-		       "MTD %s(): 0x%.4x 0x%.4x %dKiB doesn't fit\n",
+		pr_debug("MTD %s(): 0x%.4x 0x%.4x %dKiB doesn't fit\n",
 		       __func__, finfo->mfr_id, finfo->dev_id,
 		       1 << finfo->dev_size );
 		goto match_done;
@@ -2060,13 +2059,12 @@ static inline int jedec_match( uint32_t base,
 
 	uaddr = finfo->uaddr;
 
-	DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): check unlock addrs 0x%.4x 0x%.4x\n",
+	pr_debug("MTD %s(): check unlock addrs 0x%.4x 0x%.4x\n",
 	       __func__, cfi->addr_unlock1, cfi->addr_unlock2 );
 	if ( MTD_UADDR_UNNECESSARY != uaddr && MTD_UADDR_DONT_CARE != uaddr
 	     && ( unlock_addrs[uaddr].addr1 / cfi->device_type != cfi->addr_unlock1 ||
 		  unlock_addrs[uaddr].addr2 / cfi->device_type != cfi->addr_unlock2 ) ) {
-		DEBUG( MTD_DEBUG_LEVEL3,
-			"MTD %s(): 0x%.4x 0x%.4x did not match\n",
+		pr_debug("MTD %s(): 0x%.4x 0x%.4x did not match\n",
 			__func__,
 			unlock_addrs[uaddr].addr1,
 			unlock_addrs[uaddr].addr2);
@@ -2074,7 +2072,7 @@ static inline int jedec_match( uint32_t base,
 	}
 
 	/*
-	 * Make sure the ID's dissappear when the device is taken out of
+	 * Make sure the ID's disappear when the device is taken out of
 	 * ID mode.  The only time this should fail when it should succeed
 	 * is when the ID's are written as data to the same
 	 * addresses.  For this rare and unfortunate case the chip
@@ -2082,15 +2080,13 @@ static inline int jedec_match( uint32_t base,
 	 * FIXME - write a driver that takes all of the chip info as
 	 * module parameters, doesn't probe but forces a load.
 	 */
-	DEBUG( MTD_DEBUG_LEVEL3,
-	       "MTD %s(): check ID's disappear when not in ID mode\n",
+	pr_debug("MTD %s(): check ID's disappear when not in ID mode\n",
 	       __func__ );
 	jedec_reset( base, map, cfi );
 	mfr = jedec_read_mfr( map, base, cfi );
 	id = jedec_read_id( map, base, cfi );
 	if ( mfr == cfi->mfr && id == cfi->id ) {
-		DEBUG( MTD_DEBUG_LEVEL3,
-		       "MTD %s(): ID 0x%.2x:0x%.2x did not change after reset:\n"
+		pr_debug("MTD %s(): ID 0x%.2x:0x%.2x did not change after reset:\n"
 		       "You might need to manually specify JEDEC parameters.\n",
 			__func__, cfi->mfr, cfi->id );
 		goto match_done;
@@ -2103,7 +2099,7 @@ static inline int jedec_match( uint32_t base,
 	 * Put the device back in ID mode - only need to do this if we
 	 * were truly frobbing a real device.
 	 */
-	DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): return to ID mode\n", __func__ );
+	pr_debug("MTD %s(): return to ID mode\n", __func__ );
 	if (cfi->addr_unlock1) {
 		cfi_send_gen_cmd(0xaa, cfi->addr_unlock1, base, map, cfi, cfi->device_type, NULL);
 		cfi_send_gen_cmd(0x55, cfi->addr_unlock2, base, map, cfi, cfi->device_type, NULL);
@@ -2166,16 +2162,14 @@ static int jedec_probe_chip(struct map_info *map, __u32 base,
 
 		cfi->mfr = jedec_read_mfr(map, base, cfi);
 		cfi->id = jedec_read_id(map, base, cfi);
-		DEBUG(MTD_DEBUG_LEVEL3,
-		      "Search for id:(%02x %02x) interleave(%d) type(%d)\n",
+		pr_debug("Search for id:(%02x %02x) interleave(%d) type(%d)\n",
 			cfi->mfr, cfi->id, cfi_interleave(cfi), cfi->device_type);
 		for (i = 0; i < ARRAY_SIZE(jedec_table); i++) {
 			if ( jedec_match( base, map, cfi, &jedec_table[i] ) ) {
-				DEBUG( MTD_DEBUG_LEVEL3,
-				       "MTD %s(): matched device 0x%x,0x%x unlock_addrs: 0x%.4x 0x%.4x\n",
+				pr_debug("MTD %s(): matched device 0x%x,0x%x unlock_addrs: 0x%.4x 0x%.4x\n",
 				       __func__, cfi->mfr, cfi->id,
 				       cfi->addr_unlock1, cfi->addr_unlock2 );
-				if (!cfi_jedec_setup(cfi, i))
+				if (!cfi_jedec_setup(map, cfi, i))
 					return 0;
 				goto ok_out;
 			}
diff --git a/drivers/mtd/chips/map_absent.c b/drivers/mtd/chips/map_absent.c
index 494d30d0631..f7a5bca92ae 100644
--- a/drivers/mtd/chips/map_absent.c
+++ b/drivers/mtd/chips/map_absent.c
@@ -25,7 +25,6 @@
 #include <linux/init.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
-#include <linux/mtd/compatmac.h>
 
 static int map_absent_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
 static int map_absent_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
@@ -56,10 +55,10 @@ static struct mtd_info *map_absent_probe(struct map_info *map)
 	mtd->name 	= map->name;
 	mtd->type 	= MTD_ABSENT;
 	mtd->size 	= map->size;
-	mtd->erase 	= map_absent_erase;
-	mtd->read 	= map_absent_read;
-	mtd->write 	= map_absent_write;
-	mtd->sync 	= map_absent_sync;
+	mtd->_erase 	= map_absent_erase;
+	mtd->_read 	= map_absent_read;
+	mtd->_write 	= map_absent_write;
+	mtd->_sync 	= map_absent_sync;
 	mtd->flags 	= 0;
 	mtd->erasesize  = PAGE_SIZE;
 	mtd->writesize  = 1;
@@ -71,13 +70,11 @@ static struct mtd_info *map_absent_probe(struct map_info *map)
 
 static int map_absent_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
 {
-	*retlen = 0;
 	return -ENODEV;
 }
 
 static int map_absent_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
 {
-	*retlen = 0;
 	return -ENODEV;
 }
 
diff --git a/drivers/mtd/chips/map_ram.c b/drivers/mtd/chips/map_ram.c
index 6bdc50c727e..991c2a1c05d 100644
--- a/drivers/mtd/chips/map_ram.c
+++ b/drivers/mtd/chips/map_ram.c
@@ -13,7 +13,6 @@
 #include <linux/init.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
-#include <linux/mtd/compatmac.h>
 
 
 static int mapram_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
@@ -65,11 +64,11 @@ static struct mtd_info *map_ram_probe(struct map_info *map)
 	mtd->name = map->name;
 	mtd->type = MTD_RAM;
 	mtd->size = map->size;
-	mtd->erase = mapram_erase;
-	mtd->get_unmapped_area = mapram_unmapped_area;
-	mtd->read = mapram_read;
-	mtd->write = mapram_write;
-	mtd->sync = mapram_nop;
+	mtd->_erase = mapram_erase;
+	mtd->_get_unmapped_area = mapram_unmapped_area;
+	mtd->_read = mapram_read;
+	mtd->_write = mapram_write;
+	mtd->_sync = mapram_nop;
 	mtd->flags = MTD_CAP_RAM;
 	mtd->writesize = 1;
 
@@ -123,14 +122,10 @@ static int mapram_erase (struct mtd_info *mtd, struct erase_info *instr)
 	unsigned long i;
 
 	allff = map_word_ff(map);
-
 	for (i=0; i<instr->len; i += map_bankwidth(map))
 		map_write(map, allff, instr->addr + i);
-
 	instr->state = MTD_ERASE_DONE;
-
 	mtd_erase_callback(instr);
-
 	return 0;
 }
 
diff --git a/drivers/mtd/chips/map_rom.c b/drivers/mtd/chips/map_rom.c
index 076090a67b9..47a43cf7e5c 100644
--- a/drivers/mtd/chips/map_rom.c
+++ b/drivers/mtd/chips/map_rom.c
@@ -13,7 +13,6 @@
 #include <linux/init.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
-#include <linux/mtd/compatmac.h>
 
 static int maprom_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
 static int maprom_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
@@ -42,11 +41,11 @@ static struct mtd_info *map_rom_probe(struct map_info *map)
 	mtd->name = map->name;
 	mtd->type = MTD_ROM;
 	mtd->size = map->size;
-	mtd->get_unmapped_area = maprom_unmapped_area;
-	mtd->read = maprom_read;
-	mtd->write = maprom_write;
-	mtd->sync = maprom_nop;
-	mtd->erase = maprom_erase;
+	mtd->_get_unmapped_area = maprom_unmapped_area;
+	mtd->_read = maprom_read;
+	mtd->_write = maprom_write;
+	mtd->_sync = maprom_nop;
+	mtd->_erase = maprom_erase;
 	mtd->flags = MTD_CAP_ROM;
 	mtd->erasesize = map->size;
 	mtd->writesize = 1;
@@ -86,8 +85,7 @@ static void maprom_nop(struct mtd_info *mtd)
 
 static int maprom_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
 {
-	printk(KERN_NOTICE "maprom_write called\n");
-	return -EIO;
+	return -EROFS;
 }
 
 static int maprom_erase (struct mtd_info *mtd, struct erase_info *info)
diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c
index 1479da6d3aa..3e829b37af8 100644
--- a/drivers/mtd/cmdlinepart.c
+++ b/drivers/mtd/cmdlinepart.c
@@ -1,17 +1,43 @@
 /*
  * Read flash partition table from command line
  *
- * Copyright 2002 SYSGO Real-Time Solutions GmbH
+ * Copyright © 2002      SYSGO Real-Time Solutions GmbH
+ * Copyright © 2002-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  *
  * The format for the command line is as follows:
  *
  * mtdparts=<mtddef>[;<mtddef]
  * <mtddef>  := <mtd-id>:<partdef>[,<partdef>]
- *              where <mtd-id> is the name from the "cat /proc/mtd" command
- * <partdef> := <size>[@offset][<name>][ro][lk]
+ * <partdef> := <size>[@<offset>][<name>][ro][lk]
  * <mtd-id>  := unique name used in mapping driver/device (mtd->name)
  * <size>    := standard linux memsize OR "-" to denote all remaining space
+ *              size is automatically truncated at end of device
+ *              if specified or trucated size is 0 the part is skipped
+ * <offset>  := standard linux memsize
+ *              if omitted the part will immediately follow the previous part
+ *              or 0 if the first part
  * <name>    := '(' NAME ')'
+ *              NAME will appear in /proc/mtd
+ *
+ * <size> and <offset> can be specified such that the parts are out of order
+ * in physical memory and may even overlap.
+ *
+ * The parts are assigned MTD numbers in the order they are specified in the
+ * command line regardless of their order in physical memory.
  *
  * Examples:
  *
@@ -24,10 +50,10 @@
 
 #include <linux/kernel.h>
 #include <linux/slab.h>
-
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/bootmem.h>
+#include <linux/module.h>
+#include <linux/err.h>
 
 /* error message prefix */
 #define ERRP "mtd: "
@@ -41,8 +67,8 @@
 
 
 /* special size referring to all the remaining space in a partition */
-#define SIZE_REMAINING UINT_MAX
-#define OFFSET_CONTINUOUS UINT_MAX
+#define SIZE_REMAINING ULLONG_MAX
+#define OFFSET_CONTINUOUS ULLONG_MAX
 
 struct cmdline_mtd_partition {
 	struct cmdline_mtd_partition *next;
@@ -54,9 +80,10 @@ struct cmdline_mtd_partition {
 /* mtdpart_setup() parses into here */
 static struct cmdline_mtd_partition *partitions;
 
-/* the command line passed to mtdpart_setupd() */
+/* the command line passed to mtdpart_setup() */
+static char *mtdparts;
 static char *cmdline;
-static int cmdline_parsed = 0;
+static int cmdline_parsed;
 
 /*
  * Parse one partition definition for an MTD. Since there can be many
@@ -67,15 +94,14 @@ static int cmdline_parsed = 0;
  * syntax has been verified ok.
  */
 static struct mtd_partition * newpart(char *s,
-                                      char **retptr,
-                                      int *num_parts,
-                                      int this_part,
-                                      unsigned char **extra_mem_ptr,
-                                      int extra_mem_size)
+				      char **retptr,
+				      int *num_parts,
+				      int this_part,
+				      unsigned char **extra_mem_ptr,
+				      int extra_mem_size)
 {
 	struct mtd_partition *parts;
-	unsigned long size;
-	unsigned long offset = OFFSET_CONTINUOUS;
+	unsigned long long size, offset = OFFSET_CONTINUOUS;
 	char *name;
 	int name_len;
 	unsigned char *extra_mem;
@@ -83,127 +109,107 @@ static struct mtd_partition * newpart(char *s,
 	unsigned int mask_flags;
 
 	/* fetch the partition size */
-	if (*s == '-')
-	{	/* assign all remaining space to this partition */
+	if (*s == '-') {
+		/* assign all remaining space to this partition */
 		size = SIZE_REMAINING;
 		s++;
-	}
-	else
-	{
+	} else {
 		size = memparse(s, &s);
-		if (size < PAGE_SIZE)
-		{
-			printk(KERN_ERR ERRP "partition size too small (%lx)\n", size);
-			return NULL;
+		if (size < PAGE_SIZE) {
+			printk(KERN_ERR ERRP "partition size too small (%llx)\n",
+			       size);
+			return ERR_PTR(-EINVAL);
 		}
 	}
 
 	/* fetch partition name and flags */
 	mask_flags = 0; /* this is going to be a regular partition */
 	delim = 0;
-        /* check for offset */
-        if (*s == '@')
-	{
-                s++;
-                offset = memparse(s, &s);
-        }
-        /* now look for name */
+
+	/* check for offset */
+	if (*s == '@') {
+		s++;
+		offset = memparse(s, &s);
+	}
+
+	/* now look for name */
 	if (*s == '(')
-	{
 		delim = ')';
-	}
 
-	if (delim)
-	{
+	if (delim) {
 		char *p;
 
-	    	name = ++s;
+		name = ++s;
 		p = strchr(name, delim);
-		if (!p)
-		{
+		if (!p) {
 			printk(KERN_ERR ERRP "no closing %c found in partition name\n", delim);
-			return NULL;
+			return ERR_PTR(-EINVAL);
 		}
 		name_len = p - name;
 		s = p + 1;
-	}
-	else
-	{
-	    	name = NULL;
+	} else {
+		name = NULL;
 		name_len = 13; /* Partition_000 */
 	}
 
 	/* record name length for memory allocation later */
 	extra_mem_size += name_len + 1;
 
-        /* test for options */
-        if (strncmp(s, "ro", 2) == 0)
-	{
+	/* test for options */
+	if (strncmp(s, "ro", 2) == 0) {
 		mask_flags |= MTD_WRITEABLE;
 		s += 2;
-        }
+	}
 
-        /* if lk is found do NOT unlock the MTD partition*/
-        if (strncmp(s, "lk", 2) == 0)
-	{
+	/* if lk is found do NOT unlock the MTD partition*/
+	if (strncmp(s, "lk", 2) == 0) {
 		mask_flags |= MTD_POWERUP_LOCK;
 		s += 2;
-        }
+	}
 
 	/* test if more partitions are following */
-	if (*s == ',')
-	{
-		if (size == SIZE_REMAINING)
-		{
+	if (*s == ',') {
+		if (size == SIZE_REMAINING) {
 			printk(KERN_ERR ERRP "no partitions allowed after a fill-up partition\n");
-			return NULL;
+			return ERR_PTR(-EINVAL);
 		}
 		/* more partitions follow, parse them */
 		parts = newpart(s + 1, &s, num_parts, this_part + 1,
 				&extra_mem, extra_mem_size);
-		if (!parts)
-			return NULL;
-	}
-	else
-	{	/* this is the last partition: allocate space for all */
+		if (IS_ERR(parts))
+			return parts;
+	} else {
+		/* this is the last partition: allocate space for all */
 		int alloc_size;
 
 		*num_parts = this_part + 1;
 		alloc_size = *num_parts * sizeof(struct mtd_partition) +
 			     extra_mem_size;
+
 		parts = kzalloc(alloc_size, GFP_KERNEL);
 		if (!parts)
-		{
-			printk(KERN_ERR ERRP "out of memory\n");
-			return NULL;
-		}
+			return ERR_PTR(-ENOMEM);
 		extra_mem = (unsigned char *)(parts + *num_parts);
 	}
+
 	/* enter this partition (offset will be calculated later if it is zero at this point) */
 	parts[this_part].size = size;
 	parts[this_part].offset = offset;
 	parts[this_part].mask_flags = mask_flags;
 	if (name)
-	{
 		strlcpy(extra_mem, name, name_len + 1);
-	}
 	else
-	{
 		sprintf(extra_mem, "Partition_%03d", this_part);
-	}
 	parts[this_part].name = extra_mem;
 	extra_mem += name_len + 1;
 
 	dbg(("partition %d: name <%s>, offset %llx, size %llx, mask flags %x\n",
-	     this_part,
-	     parts[this_part].name,
-	     parts[this_part].offset,
-	     parts[this_part].size,
-	     parts[this_part].mask_flags));
+	     this_part, parts[this_part].name, parts[this_part].offset,
+	     parts[this_part].size, parts[this_part].mask_flags));
 
 	/* return (updated) pointer to extra_mem memory */
 	if (extra_mem_ptr)
-	  *extra_mem_ptr = extra_mem;
+		*extra_mem_ptr = extra_mem;
 
 	/* return (updated) pointer command line string */
 	*retptr = s;
@@ -223,16 +229,16 @@ static int mtdpart_setup_real(char *s)
 	{
 		struct cmdline_mtd_partition *this_mtd;
 		struct mtd_partition *parts;
-	    	int mtd_id_len;
-		int num_parts;
+		int mtd_id_len, num_parts;
 		char *p, *mtd_id;
 
-	    	mtd_id = s;
+		mtd_id = s;
+
 		/* fetch <mtd-id> */
-		if (!(p = strchr(s, ':')))
-		{
+		p = strchr(s, ':');
+		if (!p) {
 			printk(KERN_ERR ERRP "no mtd-id\n");
-			return 0;
+			return -EINVAL;
 		}
 		mtd_id_len = p - mtd_id;
 
@@ -249,8 +255,7 @@ static int mtdpart_setup_real(char *s)
 				(unsigned char**)&this_mtd, /* out: extra mem */
 				mtd_id_len + 1 + sizeof(*this_mtd) +
 				sizeof(void*)-1 /*alignment*/);
-		if(!parts)
-		{
+		if (IS_ERR(parts)) {
 			/*
 			 * An error occurred. We're either:
 			 * a) out of memory, or
@@ -258,12 +263,12 @@ static int mtdpart_setup_real(char *s)
 			 * Either way, this mtd is hosed and we're
 			 * unlikely to succeed in parsing any more
 			 */
-			 return 0;
+			 return PTR_ERR(parts);
 		 }
 
 		/* align this_mtd */
 		this_mtd = (struct cmdline_mtd_partition *)
-			ALIGN((unsigned long)this_mtd, sizeof(void*));
+				ALIGN((unsigned long)this_mtd, sizeof(void *));
 		/* enter results */
 		this_mtd->parts = parts;
 		this_mtd->num_parts = num_parts;
@@ -283,14 +288,14 @@ static int mtdpart_setup_real(char *s)
 			break;
 
 		/* does another spec follow? */
-		if (*s != ';')
-		{
+		if (*s != ';') {
 			printk(KERN_ERR ERRP "bad character after partition (%c)\n", *s);
-			return 0;
+			return -EINVAL;
 		}
 		s++;
 	}
-	return 1;
+
+	return 0;
 }
 
 /*
@@ -301,49 +306,67 @@ static int mtdpart_setup_real(char *s)
  * the first one in the chain if a NULL mtd_id is passed in.
  */
 static int parse_cmdline_partitions(struct mtd_info *master,
-                             struct mtd_partition **pparts,
-                             unsigned long origin)
+				    struct mtd_partition **pparts,
+				    struct mtd_part_parser_data *data)
 {
-	unsigned long offset;
-	int i;
+	unsigned long long offset;
+	int i, err;
 	struct cmdline_mtd_partition *part;
 	const char *mtd_id = master->name;
 
 	/* parse command line */
-	if (!cmdline_parsed)
-		mtdpart_setup_real(cmdline);
+	if (!cmdline_parsed) {
+		err = mtdpart_setup_real(cmdline);
+		if (err)
+			return err;
+	}
 
-	for(part = partitions; part; part = part->next)
-	{
+	/*
+	 * Search for the partition definition matching master->name.
+	 * If master->name is not set, stop at first partition definition.
+	 */
+	for (part = partitions; part; part = part->next) {
 		if ((!mtd_id) || (!strcmp(part->mtd_id, mtd_id)))
-		{
-			for(i = 0, offset = 0; i < part->num_parts; i++)
-			{
-				if (part->parts[i].offset == OFFSET_CONTINUOUS)
-				  part->parts[i].offset = offset;
-				else
-				  offset = part->parts[i].offset;
-				if (part->parts[i].size == SIZE_REMAINING)
-				  part->parts[i].size = master->size - offset;
-				if (offset + part->parts[i].size > master->size)
-				{
-					printk(KERN_WARNING ERRP
-					       "%s: partitioning exceeds flash size, truncating\n",
-					       part->mtd_id);
-					part->parts[i].size = master->size - offset;
-					part->num_parts = i;
-				}
-				offset += part->parts[i].size;
-			}
-			*pparts = kmemdup(part->parts,
-					sizeof(*part->parts) * part->num_parts,
-					GFP_KERNEL);
-			if (!*pparts)
-				return -ENOMEM;
-			return part->num_parts;
+			break;
+	}
+
+	if (!part)
+		return 0;
+
+	for (i = 0, offset = 0; i < part->num_parts; i++) {
+		if (part->parts[i].offset == OFFSET_CONTINUOUS)
+			part->parts[i].offset = offset;
+		else
+			offset = part->parts[i].offset;
+
+		if (part->parts[i].size == SIZE_REMAINING)
+			part->parts[i].size = master->size - offset;
+
+		if (offset + part->parts[i].size > master->size) {
+			printk(KERN_WARNING ERRP
+			       "%s: partitioning exceeds flash size, truncating\n",
+			       part->mtd_id);
+			part->parts[i].size = master->size - offset;
+		}
+		offset += part->parts[i].size;
+
+		if (part->parts[i].size == 0) {
+			printk(KERN_WARNING ERRP
+			       "%s: skipping zero sized partition\n",
+			       part->mtd_id);
+			part->num_parts--;
+			memmove(&part->parts[i], &part->parts[i + 1],
+				sizeof(*part->parts) * (part->num_parts - i));
+			i--;
 		}
 	}
-	return 0;
+
+	*pparts = kmemdup(part->parts, sizeof(*part->parts) * part->num_parts,
+			  GFP_KERNEL);
+	if (!*pparts)
+		return -ENOMEM;
+
+	return part->num_parts;
 }
 
 
@@ -354,7 +377,7 @@ static int parse_cmdline_partitions(struct mtd_info *master,
  *
  * This function needs to be visible for bootloaders.
  */
-static int mtdpart_setup(char *s)
+static int __init mtdpart_setup(char *s)
 {
 	cmdline = s;
 	return 1;
@@ -370,10 +393,22 @@ static struct mtd_part_parser cmdline_parser = {
 
 static int __init cmdline_parser_init(void)
 {
-	return register_mtd_parser(&cmdline_parser);
+	if (mtdparts)
+		mtdpart_setup(mtdparts);
+	register_mtd_parser(&cmdline_parser);
+	return 0;
+}
+
+static void __exit cmdline_parser_exit(void)
+{
+	deregister_mtd_parser(&cmdline_parser);
 }
 
 module_init(cmdline_parser_init);
+module_exit(cmdline_parser_exit);
+
+MODULE_PARM_DESC(mtdparts, "Partitioning specification");
+module_param(mtdparts, charp, 0);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Marius Groeger <mag@sysgo.de>");
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 35081ce77fb..c49d0b127fe 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -1,5 +1,6 @@
 menu "Self-contained MTD device drivers"
 	depends on MTD!=n
+	depends on HAS_IOMEM
 
 config MTD_PMC551
 	tristate "Ramix PMC551 PCI Mezzanine RAM card support"
@@ -51,7 +52,7 @@ config MTD_MS02NV
 
 config MTD_DATAFLASH
 	tristate "Support for AT45xxx DataFlash"
-	depends on SPI_MASTER && EXPERIMENTAL
+	depends on SPI_MASTER
 	help
 	  This enables access to AT45xxx DataFlash chips, using SPI.
 	  Sometimes DataFlash chips are packaged inside MMC-format
@@ -70,7 +71,6 @@ config MTD_DATAFLASH_WRITE_VERIFY
 config MTD_DATAFLASH_OTP
 	bool "DataFlash OTP support (Security Register)"
 	depends on MTD_DATAFLASH
-	select HAVE_MTD_OTP
 	help
 	  Newer DataFlash chips (revisions C and D) support 128 bytes of
 	  one-time-programmable (OTP) data.  The first half may be written
@@ -80,7 +80,7 @@ config MTD_DATAFLASH_OTP
 
 config MTD_M25P80
 	tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)"
-	depends on SPI_MASTER && EXPERIMENTAL
+	depends on SPI_MASTER && MTD_SPI_NOR
 	help
 	  This enables access to most modern SPI flash chips, used for
 	  program and data storage.   Series supported include Atmel AT26DF,
@@ -95,12 +95,12 @@ config MTD_M25P80
 	  if you want to specify device partitioning or to use a device which
 	  doesn't support the JEDEC ID instruction.
 
-config M25PXX_USE_FAST_READ
-	bool "Use FAST_READ OPCode allowing SPI CLK <= 50MHz"
-	depends on MTD_M25P80
+config MTD_SPEAR_SMI
+	tristate "SPEAR MTD NOR Support through SMI controller"
+	depends on PLAT_SPEAR
 	default y
 	help
-	  This option enables FAST_READ access supported by ST M25Pxx.
+	  This enable SNOR support on SPEAR platforms using SMI controller
 
 config MTD_SST25L
 	tristate "Support SST25L (non JEDEC) SPI Flash chips"
@@ -112,6 +112,14 @@ config MTD_SST25L
 	  Set up your spi devices with the right board-specific platform data,
 	  if you want to specify device partitioning.
 
+config MTD_BCM47XXSFLASH
+	tristate "R/O support for serial flash on BCMA bus"
+	depends on BCMA_SFLASH
+	help
+	  BCMA bus can have various flash memories attached, they are
+	  registered by bcma as platform devices. This enables driver for
+	  serial flash memories (only read-only mode is implemented).
+
 config MTD_SLRAM
 	tristate "Uncached system RAM"
 	help
@@ -189,120 +197,32 @@ config MTD_BLOCK2MTD
 
 comment "Disk-On-Chip Device Drivers"
 
-config MTD_DOC2000
-	tristate "M-Systems Disk-On-Chip 2000 and Millennium (DEPRECATED)"
-	select MTD_DOCPROBE
-	select MTD_NAND_IDS
+config MTD_DOCG3
+	tristate "M-Systems Disk-On-Chip G3"
+	select BCH
+	select BCH_CONST_PARAMS
+	select BITREVERSE
 	---help---
 	  This provides an MTD device driver for the M-Systems DiskOnChip
-	  2000 and Millennium devices.  Originally designed for the DiskOnChip
-	  2000, it also now includes support for the DiskOnChip Millennium.
-	  If you have problems with this driver and the DiskOnChip Millennium,
-	  you may wish to try the alternative Millennium driver below. To use
-	  the alternative driver, you will need to undefine DOC_SINGLE_DRIVER
-	  in the <file:drivers/mtd/devices/docprobe.c> source code.
-
-	  If you use this device, you probably also want to enable the NFTL
-	  'NAND Flash Translation Layer' option below, which is used to
-	  emulate a block device by using a kind of file system on the flash
-	  chips.
-
-	  NOTE: This driver is deprecated and will probably be removed soon.
-	  Please try the new DiskOnChip driver under "NAND Flash Device
-	  Drivers".
-
-config MTD_DOC2001
-	tristate "M-Systems Disk-On-Chip Millennium-only alternative driver (DEPRECATED)"
-	select MTD_DOCPROBE
-	select MTD_NAND_IDS
-	---help---
-	  This provides an alternative MTD device driver for the M-Systems
-	  DiskOnChip Millennium devices.  Use this if you have problems with
-	  the combined DiskOnChip 2000 and Millennium driver above.  To get
-	  the DiskOnChip probe code to load and use this driver instead of
-	  the other one, you will need to undefine DOC_SINGLE_DRIVER near
-	  the beginning of <file:drivers/mtd/devices/docprobe.c>.
-
-	  If you use this device, you probably also want to enable the NFTL
-	  'NAND Flash Translation Layer' option below, which is used to
-	  emulate a block device by using a kind of file system on the flash
-	  chips.
-
-	  NOTE: This driver is deprecated and will probably be removed soon.
-	  Please try the new DiskOnChip driver under "NAND Flash Device
-	  Drivers".
-
-config MTD_DOC2001PLUS
-	tristate "M-Systems Disk-On-Chip Millennium Plus"
-	select MTD_DOCPROBE
-	select MTD_NAND_IDS
-	---help---
-	  This provides an MTD device driver for the M-Systems DiskOnChip
-	  Millennium Plus devices.
-
-	  If you use this device, you probably also want to enable the INFTL
-	  'Inverse NAND Flash Translation Layer' option below, which is used
-	  to emulate a block device by using a kind of file system on the
-	  flash chips.
-
-	  NOTE: This driver will soon be replaced by the new DiskOnChip driver
-	  under "NAND Flash Device Drivers" (currently that driver does not
-	  support all Millennium Plus devices).
-
-config MTD_DOCPROBE
-	tristate
-	select MTD_DOCECC
-
-config MTD_DOCECC
-	tristate
-
-config MTD_DOCPROBE_ADVANCED
-	bool "Advanced detection options for DiskOnChip"
-	depends on MTD_DOCPROBE
-	help
-	  This option allows you to specify nonstandard address at which to
-	  probe for a DiskOnChip, or to change the detection options.  You
-	  are unlikely to need any of this unless you are using LinuxBIOS.
-	  Say 'N'.
-
-config MTD_DOCPROBE_ADDRESS
-	hex "Physical address of DiskOnChip" if MTD_DOCPROBE_ADVANCED
-	depends on MTD_DOCPROBE
-	default "0x0000" if MTD_DOCPROBE_ADVANCED
-	default "0" if !MTD_DOCPROBE_ADVANCED
-	---help---
-	  By default, the probe for DiskOnChip devices will look for a
-	  DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
-	  This option allows you to specify a single address at which to probe
-	  for the device, which is useful if you have other devices in that
-	  range which get upset when they are probed.
-
-	  (Note that on PowerPC, the normal probe will only check at
-	  0xE4000000.)
-
-	  Normally, you should leave this set to zero, to allow the probe at
-	  the normal addresses.
-
-config MTD_DOCPROBE_HIGH
-	bool "Probe high addresses"
-	depends on MTD_DOCPROBE_ADVANCED
-	help
-	  By default, the probe for DiskOnChip devices will look for a
-	  DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
-	  This option changes to make it probe between 0xFFFC8000 and
-	  0xFFFEE000.  Unless you are using LinuxBIOS, this is unlikely to be
-	  useful to you.  Say 'N'.
-
-config MTD_DOCPROBE_55AA
-	bool "Probe for 0x55 0xAA BIOS Extension Signature"
-	depends on MTD_DOCPROBE_ADVANCED
-	help
-	  Check for the 0x55 0xAA signature of a DiskOnChip, and do not
-	  continue with probing if it is absent.  The signature will always be
-	  present for a DiskOnChip 2000 or a normal DiskOnChip Millennium.
-	  Only if you have overwritten the first block of a DiskOnChip
-	  Millennium will it be absent.  Enable this option if you are using
-	  LinuxBIOS or if you need to recover a DiskOnChip Millennium on which
-	  you have managed to wipe the first block.
+	  G3 devices.
+
+	  The driver provides access to G3 DiskOnChip, distributed by
+	  M-Systems and now Sandisk. The support is very experimental,
+	  and doesn't give access to any write operations.
+
+config MTD_ST_SPI_FSM
+	tristate "ST Microelectronics SPI FSM Serial Flash Controller"
+	depends on ARCH_STI
+	help
+	  This provides an MTD device driver for the ST Microelectronics
+	  SPI Fast Sequence Mode (FSM) Serial Flash Controller and support
+	  for a subset of connected Serial Flash devices.
+
+if MTD_DOCG3
+config BCH_CONST_M
+	default 14
+config BCH_CONST_T
+	default 4
+endif
 
 endmenu
diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile
index f3226b1d38f..c68868f6058 100644
--- a/drivers/mtd/devices/Makefile
+++ b/drivers/mtd/devices/Makefile
@@ -2,11 +2,7 @@
 # linux/drivers/mtd/devices/Makefile
 #
 
-obj-$(CONFIG_MTD_DOC2000)	+= doc2000.o
-obj-$(CONFIG_MTD_DOC2001)	+= doc2001.o
-obj-$(CONFIG_MTD_DOC2001PLUS)	+= doc2001plus.o
-obj-$(CONFIG_MTD_DOCPROBE)	+= docprobe.o
-obj-$(CONFIG_MTD_DOCECC)	+= docecc.o
+obj-$(CONFIG_MTD_DOCG3)		+= docg3.o
 obj-$(CONFIG_MTD_SLRAM)		+= slram.o
 obj-$(CONFIG_MTD_PHRAM)		+= phram.o
 obj-$(CONFIG_MTD_PMC551)	+= pmc551.o
@@ -16,4 +12,11 @@ obj-$(CONFIG_MTD_LART)		+= lart.o
 obj-$(CONFIG_MTD_BLOCK2MTD)	+= block2mtd.o
 obj-$(CONFIG_MTD_DATAFLASH)	+= mtd_dataflash.o
 obj-$(CONFIG_MTD_M25P80)	+= m25p80.o
+obj-$(CONFIG_MTD_NAND_OMAP_BCH)	+= elm.o
+obj-$(CONFIG_MTD_SPEAR_SMI)	+= spear_smi.o
 obj-$(CONFIG_MTD_SST25L)	+= sst25l.o
+obj-$(CONFIG_MTD_BCM47XXSFLASH)	+= bcm47xxsflash.o
+obj-$(CONFIG_MTD_ST_SPI_FSM)    += st_spi_fsm.o
+
+
+CFLAGS_docg3.o			+= -I$(src)
diff --git a/drivers/mtd/devices/bcm47xxsflash.c b/drivers/mtd/devices/bcm47xxsflash.c
new file mode 100644
index 00000000000..77de29bc02b
--- /dev/null
+++ b/drivers/mtd/devices/bcm47xxsflash.c
@@ -0,0 +1,340 @@
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/platform_device.h>
+#include <linux/bcma/bcma.h>
+
+#include "bcm47xxsflash.h"
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Serial flash driver for BCMA bus");
+
+static const char * const probes[] = { "bcm47xxpart", NULL };
+
+/**************************************************
+ * Various helpers
+ **************************************************/
+
+static void bcm47xxsflash_cmd(struct bcm47xxsflash *b47s, u32 opcode)
+{
+	int i;
+
+	b47s->cc_write(b47s, BCMA_CC_FLASHCTL, BCMA_CC_FLASHCTL_START | opcode);
+	for (i = 0; i < 1000; i++) {
+		if (!(b47s->cc_read(b47s, BCMA_CC_FLASHCTL) &
+		      BCMA_CC_FLASHCTL_BUSY))
+			return;
+		cpu_relax();
+	}
+	pr_err("Control command failed (timeout)!\n");
+}
+
+static int bcm47xxsflash_poll(struct bcm47xxsflash *b47s, int timeout)
+{
+	unsigned long deadline = jiffies + timeout;
+
+	do {
+		switch (b47s->type) {
+		case BCM47XXSFLASH_TYPE_ST:
+			bcm47xxsflash_cmd(b47s, OPCODE_ST_RDSR);
+			if (!(b47s->cc_read(b47s, BCMA_CC_FLASHDATA) &
+			      SR_ST_WIP))
+				return 0;
+			break;
+		case BCM47XXSFLASH_TYPE_ATMEL:
+			bcm47xxsflash_cmd(b47s, OPCODE_AT_STATUS);
+			if (b47s->cc_read(b47s, BCMA_CC_FLASHDATA) &
+			    SR_AT_READY)
+				return 0;
+			break;
+		}
+
+		cpu_relax();
+		udelay(1);
+	} while (!time_after_eq(jiffies, deadline));
+
+	pr_err("Timeout waiting for flash to be ready!\n");
+
+	return -EBUSY;
+}
+
+/**************************************************
+ * MTD ops
+ **************************************************/
+
+static int bcm47xxsflash_erase(struct mtd_info *mtd, struct erase_info *erase)
+{
+	struct bcm47xxsflash *b47s = mtd->priv;
+	int err;
+
+	switch (b47s->type) {
+	case BCM47XXSFLASH_TYPE_ST:
+		bcm47xxsflash_cmd(b47s, OPCODE_ST_WREN);
+		b47s->cc_write(b47s, BCMA_CC_FLASHADDR, erase->addr);
+		/* Newer flashes have "sub-sectors" which can be erased
+		 * independently with a new command: ST_SSE. The ST_SE command
+		 * erases 64KB just as before.
+		 */
+		if (b47s->blocksize < (64 * 1024))
+			bcm47xxsflash_cmd(b47s, OPCODE_ST_SSE);
+		else
+			bcm47xxsflash_cmd(b47s, OPCODE_ST_SE);
+		break;
+	case BCM47XXSFLASH_TYPE_ATMEL:
+		b47s->cc_write(b47s, BCMA_CC_FLASHADDR, erase->addr << 1);
+		bcm47xxsflash_cmd(b47s, OPCODE_AT_PAGE_ERASE);
+		break;
+	}
+
+	err = bcm47xxsflash_poll(b47s, HZ);
+	if (err)
+		erase->state = MTD_ERASE_FAILED;
+	else
+		erase->state = MTD_ERASE_DONE;
+
+	if (erase->callback)
+		erase->callback(erase);
+
+	return err;
+}
+
+static int bcm47xxsflash_read(struct mtd_info *mtd, loff_t from, size_t len,
+			      size_t *retlen, u_char *buf)
+{
+	struct bcm47xxsflash *b47s = mtd->priv;
+
+	/* Check address range */
+	if ((from + len) > mtd->size)
+		return -EINVAL;
+
+	memcpy_fromio(buf, (void __iomem *)KSEG0ADDR(b47s->window + from),
+		      len);
+	*retlen = len;
+
+	return len;
+}
+
+static int bcm47xxsflash_write_st(struct mtd_info *mtd, u32 offset, size_t len,
+				  const u_char *buf)
+{
+	struct bcm47xxsflash *b47s = mtd->priv;
+	int written = 0;
+
+	/* Enable writes */
+	bcm47xxsflash_cmd(b47s, OPCODE_ST_WREN);
+
+	/* Write first byte */
+	b47s->cc_write(b47s, BCMA_CC_FLASHADDR, offset);
+	b47s->cc_write(b47s, BCMA_CC_FLASHDATA, *buf++);
+
+	/* Program page */
+	if (b47s->bcma_cc->core->id.rev < 20) {
+		bcm47xxsflash_cmd(b47s, OPCODE_ST_PP);
+		return 1; /* 1B written */
+	}
+
+	/* Program page and set CSA (on newer chips we can continue writing) */
+	bcm47xxsflash_cmd(b47s, OPCODE_ST_CSA | OPCODE_ST_PP);
+	offset++;
+	len--;
+	written++;
+
+	while (len > 0) {
+		/* Page boundary, another function call is needed */
+		if ((offset & 0xFF) == 0)
+			break;
+
+		bcm47xxsflash_cmd(b47s, OPCODE_ST_CSA | *buf++);
+		offset++;
+		len--;
+		written++;
+	}
+
+	/* All done, drop CSA & poll */
+	b47s->cc_write(b47s, BCMA_CC_FLASHCTL, 0);
+	udelay(1);
+	if (bcm47xxsflash_poll(b47s, HZ / 10))
+		pr_err("Flash rejected dropping CSA\n");
+
+	return written;
+}
+
+static int bcm47xxsflash_write_at(struct mtd_info *mtd, u32 offset, size_t len,
+				  const u_char *buf)
+{
+	struct bcm47xxsflash *b47s = mtd->priv;
+	u32 mask = b47s->blocksize - 1;
+	u32 page = (offset & ~mask) << 1;
+	u32 byte = offset & mask;
+	int written = 0;
+
+	/* If we don't overwrite whole page, read it to the buffer first */
+	if (byte || (len < b47s->blocksize)) {
+		int err;
+
+		b47s->cc_write(b47s, BCMA_CC_FLASHADDR, page);
+		bcm47xxsflash_cmd(b47s, OPCODE_AT_BUF1_LOAD);
+		/* 250 us for AT45DB321B */
+		err = bcm47xxsflash_poll(b47s, HZ / 1000);
+		if (err) {
+			pr_err("Timeout reading page 0x%X info buffer\n", page);
+			return err;
+		}
+	}
+
+	/* Change buffer content with our data */
+	while (len > 0) {
+		/* Page boundary, another function call is needed */
+		if (byte == b47s->blocksize)
+			break;
+
+		b47s->cc_write(b47s, BCMA_CC_FLASHADDR, byte++);
+		b47s->cc_write(b47s, BCMA_CC_FLASHDATA, *buf++);
+		bcm47xxsflash_cmd(b47s, OPCODE_AT_BUF1_WRITE);
+		len--;
+		written++;
+	}
+
+	/* Program page with the buffer content */
+	b47s->cc_write(b47s, BCMA_CC_FLASHADDR, page);
+	bcm47xxsflash_cmd(b47s, OPCODE_AT_BUF1_PROGRAM);
+
+	return written;
+}
+
+static int bcm47xxsflash_write(struct mtd_info *mtd, loff_t to, size_t len,
+			       size_t *retlen, const u_char *buf)
+{
+	struct bcm47xxsflash *b47s = mtd->priv;
+	int written;
+
+	/* Writing functions can return without writing all passed data, for
+	 * example when the hardware is too old or when we git page boundary.
+	 */
+	while (len > 0) {
+		switch (b47s->type) {
+		case BCM47XXSFLASH_TYPE_ST:
+			written = bcm47xxsflash_write_st(mtd, to, len, buf);
+			break;
+		case BCM47XXSFLASH_TYPE_ATMEL:
+			written = bcm47xxsflash_write_at(mtd, to, len, buf);
+			break;
+		default:
+			BUG_ON(1);
+		}
+		if (written < 0) {
+			pr_err("Error writing at offset 0x%llX\n", to);
+			return written;
+		}
+		to += (loff_t)written;
+		len -= written;
+		*retlen += written;
+		buf += written;
+	}
+
+	return 0;
+}
+
+static void bcm47xxsflash_fill_mtd(struct bcm47xxsflash *b47s)
+{
+	struct mtd_info *mtd = &b47s->mtd;
+
+	mtd->priv = b47s;
+	mtd->name = "bcm47xxsflash";
+	mtd->owner = THIS_MODULE;
+
+	mtd->type = MTD_NORFLASH;
+	mtd->flags = MTD_CAP_NORFLASH;
+	mtd->size = b47s->size;
+	mtd->erasesize = b47s->blocksize;
+	mtd->writesize = 1;
+	mtd->writebufsize = 1;
+
+	mtd->_erase = bcm47xxsflash_erase;
+	mtd->_read = bcm47xxsflash_read;
+	mtd->_write = bcm47xxsflash_write;
+}
+
+/**************************************************
+ * BCMA
+ **************************************************/
+
+static int bcm47xxsflash_bcma_cc_read(struct bcm47xxsflash *b47s, u16 offset)
+{
+	return bcma_cc_read32(b47s->bcma_cc, offset);
+}
+
+static void bcm47xxsflash_bcma_cc_write(struct bcm47xxsflash *b47s, u16 offset,
+					u32 value)
+{
+	bcma_cc_write32(b47s->bcma_cc, offset, value);
+}
+
+static int bcm47xxsflash_bcma_probe(struct platform_device *pdev)
+{
+	struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev);
+	struct bcm47xxsflash *b47s;
+	int err;
+
+	b47s = devm_kzalloc(&pdev->dev, sizeof(*b47s), GFP_KERNEL);
+	if (!b47s)
+		return -ENOMEM;
+	sflash->priv = b47s;
+
+	b47s->bcma_cc = container_of(sflash, struct bcma_drv_cc, sflash);
+	b47s->cc_read = bcm47xxsflash_bcma_cc_read;
+	b47s->cc_write = bcm47xxsflash_bcma_cc_write;
+
+	switch (b47s->bcma_cc->capabilities & BCMA_CC_CAP_FLASHT) {
+	case BCMA_CC_FLASHT_STSER:
+		b47s->type = BCM47XXSFLASH_TYPE_ST;
+		break;
+	case BCMA_CC_FLASHT_ATSER:
+		b47s->type = BCM47XXSFLASH_TYPE_ATMEL;
+		break;
+	}
+
+	b47s->window = sflash->window;
+	b47s->blocksize = sflash->blocksize;
+	b47s->numblocks = sflash->numblocks;
+	b47s->size = sflash->size;
+	bcm47xxsflash_fill_mtd(b47s);
+
+	err = mtd_device_parse_register(&b47s->mtd, probes, NULL, NULL, 0);
+	if (err) {
+		pr_err("Failed to register MTD device: %d\n", err);
+		return err;
+	}
+
+	if (bcm47xxsflash_poll(b47s, HZ / 10))
+		pr_warn("Serial flash busy\n");
+
+	return 0;
+}
+
+static int bcm47xxsflash_bcma_remove(struct platform_device *pdev)
+{
+	struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev);
+	struct bcm47xxsflash *b47s = sflash->priv;
+
+	mtd_device_unregister(&b47s->mtd);
+
+	return 0;
+}
+
+static struct platform_driver bcma_sflash_driver = {
+	.probe	= bcm47xxsflash_bcma_probe,
+	.remove = bcm47xxsflash_bcma_remove,
+	.driver = {
+		.name = "bcma_sflash",
+		.owner = THIS_MODULE,
+	},
+};
+
+/**************************************************
+ * Init
+ **************************************************/
+
+module_platform_driver(bcma_sflash_driver);
diff --git a/drivers/mtd/devices/bcm47xxsflash.h b/drivers/mtd/devices/bcm47xxsflash.h
new file mode 100644
index 00000000000..fe93daf4f48
--- /dev/null
+++ b/drivers/mtd/devices/bcm47xxsflash.h
@@ -0,0 +1,76 @@
+#ifndef __BCM47XXSFLASH_H
+#define __BCM47XXSFLASH_H
+
+#include <linux/mtd/mtd.h>
+
+/* Used for ST flashes only. */
+#define OPCODE_ST_WREN		0x0006		/* Write Enable */
+#define OPCODE_ST_WRDIS		0x0004		/* Write Disable */
+#define OPCODE_ST_RDSR		0x0105		/* Read Status Register */
+#define OPCODE_ST_WRSR		0x0101		/* Write Status Register */
+#define OPCODE_ST_READ		0x0303		/* Read Data Bytes */
+#define OPCODE_ST_PP		0x0302		/* Page Program */
+#define OPCODE_ST_SE		0x02d8		/* Sector Erase */
+#define OPCODE_ST_BE		0x00c7		/* Bulk Erase */
+#define OPCODE_ST_DP		0x00b9		/* Deep Power-down */
+#define OPCODE_ST_RES		0x03ab		/* Read Electronic Signature */
+#define OPCODE_ST_CSA		0x1000		/* Keep chip select asserted */
+#define OPCODE_ST_SSE		0x0220		/* Sub-sector Erase */
+
+/* Used for Atmel flashes only. */
+#define OPCODE_AT_READ				0x07e8
+#define OPCODE_AT_PAGE_READ			0x07d2
+#define OPCODE_AT_STATUS			0x01d7
+#define OPCODE_AT_BUF1_WRITE			0x0384
+#define OPCODE_AT_BUF2_WRITE			0x0387
+#define OPCODE_AT_BUF1_ERASE_PROGRAM		0x0283
+#define OPCODE_AT_BUF2_ERASE_PROGRAM		0x0286
+#define OPCODE_AT_BUF1_PROGRAM			0x0288
+#define OPCODE_AT_BUF2_PROGRAM			0x0289
+#define OPCODE_AT_PAGE_ERASE			0x0281
+#define OPCODE_AT_BLOCK_ERASE			0x0250
+#define OPCODE_AT_BUF1_WRITE_ERASE_PROGRAM	0x0382
+#define OPCODE_AT_BUF2_WRITE_ERASE_PROGRAM	0x0385
+#define OPCODE_AT_BUF1_LOAD			0x0253
+#define OPCODE_AT_BUF2_LOAD			0x0255
+#define OPCODE_AT_BUF1_COMPARE			0x0260
+#define OPCODE_AT_BUF2_COMPARE			0x0261
+#define OPCODE_AT_BUF1_REPROGRAM		0x0258
+#define OPCODE_AT_BUF2_REPROGRAM		0x0259
+
+/* Status register bits for ST flashes */
+#define SR_ST_WIP		0x01		/* Write In Progress */
+#define SR_ST_WEL		0x02		/* Write Enable Latch */
+#define SR_ST_BP_MASK		0x1c		/* Block Protect */
+#define SR_ST_BP_SHIFT		2
+#define SR_ST_SRWD		0x80		/* Status Register Write Disable */
+
+/* Status register bits for Atmel flashes */
+#define SR_AT_READY		0x80
+#define SR_AT_MISMATCH		0x40
+#define SR_AT_ID_MASK		0x38
+#define SR_AT_ID_SHIFT		3
+
+struct bcma_drv_cc;
+
+enum bcm47xxsflash_type {
+	BCM47XXSFLASH_TYPE_ATMEL,
+	BCM47XXSFLASH_TYPE_ST,
+};
+
+struct bcm47xxsflash {
+	struct bcma_drv_cc *bcma_cc;
+	int (*cc_read)(struct bcm47xxsflash *b47s, u16 offset);
+	void (*cc_write)(struct bcm47xxsflash *b47s, u16 offset, u32 value);
+
+	enum bcm47xxsflash_type type;
+
+	u32 window;
+	u32 blocksize;
+	u16 numblocks;
+	u32 size;
+
+	struct mtd_info mtd;
+};
+
+#endif /* BCM47XXSFLASH */
diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c
index 93651865ddb..66f0405f7e5 100644
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -6,6 +6,9 @@
  *
  * Licence: GPL
  */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/fs.h>
 #include <linux/blkdev.h>
@@ -14,14 +17,10 @@
 #include <linux/list.h>
 #include <linux/init.h>
 #include <linux/mtd/mtd.h>
-#include <linux/buffer_head.h>
 #include <linux/mutex.h>
 #include <linux/mount.h>
 #include <linux/slab.h>
-
-#define ERROR(fmt, args...) printk(KERN_ERR "block2mtd: " fmt "\n" , ## args)
-#define INFO(fmt, args...) printk(KERN_INFO "block2mtd: " fmt "\n" , ## args)
-
+#include <linux/major.h>
 
 /* Info for the block device */
 struct block2mtd_dev {
@@ -53,8 +52,6 @@ static int _block2mtd_erase(struct block2mtd_dev *dev, loff_t to, size_t len)
 
 	while (pages) {
 		page = page_read(mapping, index);
-		if (!page)
-			return -ENOMEM;
 		if (IS_ERR(page))
 			return PTR_ERR(page);
 
@@ -65,6 +62,7 @@ static int _block2mtd_erase(struct block2mtd_dev *dev, loff_t to, size_t len)
 				memset(page_address(page), 0xff, PAGE_SIZE);
 				set_page_dirty(page);
 				unlock_page(page);
+				balance_dirty_pages_ratelimited(mapping);
 				break;
 			}
 
@@ -86,12 +84,11 @@ static int block2mtd_erase(struct mtd_info *mtd, struct erase_info *instr)
 	err = _block2mtd_erase(dev, from, len);
 	mutex_unlock(&dev->write_mutex);
 	if (err) {
-		ERROR("erase failed err = %d", err);
+		pr_err("erase failed err = %d\n", err);
 		instr->state = MTD_ERASE_FAILED;
 	} else
 		instr->state = MTD_ERASE_DONE;
 
-	instr->state = MTD_ERASE_DONE;
 	mtd_erase_callback(instr);
 	return err;
 }
@@ -106,14 +103,6 @@ static int block2mtd_read(struct mtd_info *mtd, loff_t from, size_t len,
 	int offset = from & (PAGE_SIZE-1);
 	int cpylen;
 
-	if (from > mtd->size)
-		return -EINVAL;
-	if (from + len > mtd->size)
-		len = mtd->size - from;
-
-	if (retlen)
-		*retlen = 0;
-
 	while (len) {
 		if ((offset + len) > PAGE_SIZE)
 			cpylen = PAGE_SIZE - offset;	// multiple pages
@@ -122,8 +111,6 @@ static int block2mtd_read(struct mtd_info *mtd, loff_t from, size_t len,
 		len = len - cpylen;
 
 		page = page_read(dev->blkdev->bd_inode->i_mapping, index);
-		if (!page)
-			return -ENOMEM;
 		if (IS_ERR(page))
 			return PTR_ERR(page);
 
@@ -150,8 +137,6 @@ static int _block2mtd_write(struct block2mtd_dev *dev, const u_char *buf,
 	int offset = to & ~PAGE_MASK;	// page offset
 	int cpylen;
 
-	if (retlen)
-		*retlen = 0;
 	while (len) {
 		if ((offset+len) > PAGE_SIZE)
 			cpylen = PAGE_SIZE - offset;	// multiple pages
@@ -160,8 +145,6 @@ static int _block2mtd_write(struct block2mtd_dev *dev, const u_char *buf,
 		len = len - cpylen;
 
 		page = page_read(mapping, index);
-		if (!page)
-			return -ENOMEM;
 		if (IS_ERR(page))
 			return PTR_ERR(page);
 
@@ -170,6 +153,7 @@ static int _block2mtd_write(struct block2mtd_dev *dev, const u_char *buf,
 			memcpy(page_address(page) + offset, buf, cpylen);
 			set_page_dirty(page);
 			unlock_page(page);
+			balance_dirty_pages_ratelimited(mapping);
 		}
 		page_cache_release(page);
 
@@ -190,13 +174,6 @@ static int block2mtd_write(struct mtd_info *mtd, loff_t to, size_t len,
 	struct block2mtd_dev *dev = mtd->priv;
 	int err;
 
-	if (!len)
-		return 0;
-	if (to >= mtd->size)
-		return -ENOSPC;
-	if (to + len > mtd->size)
-		len = mtd->size - to;
-
 	mutex_lock(&dev->write_mutex);
 	err = _block2mtd_write(dev, buf, to, len, retlen);
 	mutex_unlock(&dev->write_mutex);
@@ -225,16 +202,16 @@ static void block2mtd_free_device(struct block2mtd_dev *dev)
 	if (dev->blkdev) {
 		invalidate_mapping_pages(dev->blkdev->bd_inode->i_mapping,
 					0, -1);
-		close_bdev_exclusive(dev->blkdev, FMODE_READ|FMODE_WRITE);
+		blkdev_put(dev->blkdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL);
 	}
 
 	kfree(dev);
 }
 
 
-/* FIXME: ensure that mtd->size % erase_size == 0 */
 static struct block2mtd_dev *add_device(char *devname, int erase_size)
 {
+	const fmode_t mode = FMODE_READ | FMODE_WRITE | FMODE_EXCL;
 	struct block_device *bdev;
 	struct block2mtd_dev *dev;
 	char *name;
@@ -247,7 +224,7 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size)
 		return NULL;
 
 	/* Get a handle on the device */
-	bdev = open_bdev_exclusive(devname, FMODE_READ|FMODE_WRITE, NULL);
+	bdev = blkdev_get_by_path(devname, mode, dev);
 #ifndef MODULE
 	if (IS_ERR(bdev)) {
 
@@ -255,21 +232,25 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size)
 		   to resolve the device name by other means. */
 
 		dev_t devt = name_to_dev_t(devname);
-		if (devt) {
-			bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);
-		}
+		if (devt)
+			bdev = blkdev_get_by_dev(devt, mode, dev);
 	}
 #endif
 
 	if (IS_ERR(bdev)) {
-		ERROR("error: cannot open device %s", devname);
-		goto devinit_err;
+		pr_err("error: cannot open device %s\n", devname);
+		goto err_free_block2mtd;
 	}
 	dev->blkdev = bdev;
 
 	if (MAJOR(bdev->bd_dev) == MTD_BLOCK_MAJOR) {
-		ERROR("attempting to use an MTD device as a block device");
-		goto devinit_err;
+		pr_err("attempting to use an MTD device as a block device\n");
+		goto err_free_block2mtd;
+	}
+
+	if ((long)dev->blkdev->bd_inode->i_size % erase_size) {
+		pr_err("erasesize must be a divisor of device size\n");
+		goto err_free_block2mtd;
 	}
 
 	mutex_init(&dev->write_mutex);
@@ -278,34 +259,37 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size)
 	/* make the name contain the block device in */
 	name = kasprintf(GFP_KERNEL, "block2mtd: %s", devname);
 	if (!name)
-		goto devinit_err;
+		goto err_destroy_mutex;
 
 	dev->mtd.name = name;
 
 	dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK;
 	dev->mtd.erasesize = erase_size;
 	dev->mtd.writesize = 1;
+	dev->mtd.writebufsize = PAGE_SIZE;
 	dev->mtd.type = MTD_RAM;
 	dev->mtd.flags = MTD_CAP_RAM;
-	dev->mtd.erase = block2mtd_erase;
-	dev->mtd.write = block2mtd_write;
-	dev->mtd.writev = default_mtd_writev;
-	dev->mtd.sync = block2mtd_sync;
-	dev->mtd.read = block2mtd_read;
+	dev->mtd._erase = block2mtd_erase;
+	dev->mtd._write = block2mtd_write;
+	dev->mtd._sync = block2mtd_sync;
+	dev->mtd._read = block2mtd_read;
 	dev->mtd.priv = dev;
 	dev->mtd.owner = THIS_MODULE;
 
-	if (add_mtd_device(&dev->mtd)) {
-		/* Device didnt get added, so free the entry */
-		goto devinit_err;
+	if (mtd_device_register(&dev->mtd, NULL, 0)) {
+		/* Device didn't get added, so free the entry */
+		goto err_destroy_mutex;
 	}
 	list_add(&dev->list, &blkmtd_device_list);
-	INFO("mtd%d: [%s] erase_size = %dKiB [%d]", dev->mtd.index,
-			dev->mtd.name + strlen("block2mtd: "),
-			dev->mtd.erasesize >> 10, dev->mtd.erasesize);
+	pr_info("mtd%d: [%s] erase_size = %dKiB [%d]\n",
+		dev->mtd.index,
+		dev->mtd.name + strlen("block2mtd: "),
+		dev->mtd.erasesize >> 10, dev->mtd.erasesize);
 	return dev;
 
-devinit_err:
+err_destroy_mutex:
+	mutex_destroy(&dev->write_mutex);
+err_free_block2mtd:
 	block2mtd_free_device(dev);
 	return NULL;
 }
@@ -362,17 +346,11 @@ static inline void kill_final_newline(char *str)
 }
 
 
-#define parse_err(fmt, args...) do {	\
-	ERROR(fmt, ## args);		\
-	return 0;			\
-} while (0)
-
 #ifndef MODULE
 static int block2mtd_init_called = 0;
 static char block2mtd_paramline[80 + 12]; /* 80 for device, 12 for erase size */
 #endif
 
-
 static int block2mtd_setup2(const char *val)
 {
 	char buf[80 + 12]; /* 80 for device, 12 for erase size */
@@ -382,8 +360,10 @@ static int block2mtd_setup2(const char *val)
 	size_t erase_size = PAGE_SIZE;
 	int i, ret;
 
-	if (strnlen(val, sizeof(buf)) >= sizeof(buf))
-		parse_err("parameter too long");
+	if (strnlen(val, sizeof(buf)) >= sizeof(buf)) {
+		pr_err("parameter too long\n");
+		return 0;
+	}
 
 	strcpy(str, val);
 	kill_final_newline(str);
@@ -391,20 +371,27 @@ static int block2mtd_setup2(const char *val)
 	for (i = 0; i < 2; i++)
 		token[i] = strsep(&str, ",");
 
-	if (str)
-		parse_err("too many arguments");
+	if (str) {
+		pr_err("too many arguments\n");
+		return 0;
+	}
 
-	if (!token[0])
-		parse_err("no argument");
+	if (!token[0]) {
+		pr_err("no argument\n");
+		return 0;
+	}
 
 	name = token[0];
-	if (strlen(name) + 1 > 80)
-		parse_err("device name too long");
+	if (strlen(name) + 1 > 80) {
+		pr_err("device name too long\n");
+		return 0;
+	}
 
 	if (token[1]) {
 		ret = parse_num(&erase_size, token[1]);
 		if (ret) {
-			parse_err("illegal erase size");
+			pr_err("illegal erase size\n");
+			return 0;
 		}
 	}
 
@@ -458,7 +445,7 @@ static int __init block2mtd_init(void)
 }
 
 
-static void __devexit block2mtd_exit(void)
+static void block2mtd_exit(void)
 {
 	struct list_head *pos, *next;
 
@@ -466,9 +453,11 @@ static void __devexit block2mtd_exit(void)
 	list_for_each_safe(pos, next, &blkmtd_device_list) {
 		struct block2mtd_dev *dev = list_entry(pos, typeof(*dev), list);
 		block2mtd_sync(&dev->mtd);
-		del_mtd_device(&dev->mtd);
-		INFO("mtd%d: [%s] removed", dev->mtd.index,
-				dev->mtd.name + strlen("block2mtd: "));
+		mtd_device_unregister(&dev->mtd);
+		mutex_destroy(&dev->write_mutex);
+		pr_info("mtd%d: [%s] removed\n",
+			dev->mtd.index,
+			dev->mtd.name + strlen("block2mtd: "));
 		list_del(&dev->list);
 		block2mtd_free_device(dev);
 	}
diff --git a/drivers/mtd/devices/doc2000.c b/drivers/mtd/devices/doc2000.c
deleted file mode 100644
index 5bf5f460e13..00000000000
--- a/drivers/mtd/devices/doc2000.c
+++ /dev/null
@@ -1,1201 +0,0 @@
-
-/*
- * Linux driver for Disk-On-Chip 2000 and Millennium
- * (c) 1999 Machine Vision Holdings, Inc.
- * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/errno.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/bitops.h>
-#include <linux/mutex.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/doc2000.h>
-
-#define DOC_SUPPORT_2000
-#define DOC_SUPPORT_2000TSOP
-#define DOC_SUPPORT_MILLENNIUM
-
-#ifdef DOC_SUPPORT_2000
-#define DoC_is_2000(doc) (doc->ChipID == DOC_ChipID_Doc2k)
-#else
-#define DoC_is_2000(doc) (0)
-#endif
-
-#if defined(DOC_SUPPORT_2000TSOP) || defined(DOC_SUPPORT_MILLENNIUM)
-#define DoC_is_Millennium(doc) (doc->ChipID == DOC_ChipID_DocMil)
-#else
-#define DoC_is_Millennium(doc) (0)
-#endif
-
-/* #define ECC_DEBUG */
-
-/* I have no idea why some DoC chips can not use memcpy_from|to_io().
- * This may be due to the different revisions of the ASIC controller built-in or
- * simplily a QA/Bug issue. Who knows ?? If you have trouble, please uncomment
- * this:
- #undef USE_MEMCPY
-*/
-
-static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
-		    size_t *retlen, u_char *buf);
-static int doc_write(struct mtd_info *mtd, loff_t to, size_t len,
-		     size_t *retlen, const u_char *buf);
-static int doc_read_oob(struct mtd_info *mtd, loff_t ofs,
-			struct mtd_oob_ops *ops);
-static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
-			 struct mtd_oob_ops *ops);
-static int doc_write_oob_nolock(struct mtd_info *mtd, loff_t ofs, size_t len,
-			 size_t *retlen, const u_char *buf);
-static int doc_erase (struct mtd_info *mtd, struct erase_info *instr);
-
-static struct mtd_info *doc2klist = NULL;
-
-/* Perform the required delay cycles by reading from the appropriate register */
-static void DoC_Delay(struct DiskOnChip *doc, unsigned short cycles)
-{
-	volatile char dummy;
-	int i;
-
-	for (i = 0; i < cycles; i++) {
-		if (DoC_is_Millennium(doc))
-			dummy = ReadDOC(doc->virtadr, NOP);
-		else
-			dummy = ReadDOC(doc->virtadr, DOCStatus);
-	}
-
-}
-
-/* DOC_WaitReady: Wait for RDY line to be asserted by the flash chip */
-static int _DoC_WaitReady(struct DiskOnChip *doc)
-{
-	void __iomem *docptr = doc->virtadr;
-	unsigned long timeo = jiffies + (HZ * 10);
-
-	DEBUG(MTD_DEBUG_LEVEL3,
-	      "_DoC_WaitReady called for out-of-line wait\n");
-
-	/* Out-of-line routine to wait for chip response */
-	while (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) {
-		/* issue 2 read from NOP register after reading from CDSNControl register
-	   	see Software Requirement 11.4 item 2. */
-		DoC_Delay(doc, 2);
-
-		if (time_after(jiffies, timeo)) {
-			DEBUG(MTD_DEBUG_LEVEL2, "_DoC_WaitReady timed out.\n");
-			return -EIO;
-		}
-		udelay(1);
-		cond_resched();
-	}
-
-	return 0;
-}
-
-static inline int DoC_WaitReady(struct DiskOnChip *doc)
-{
-	void __iomem *docptr = doc->virtadr;
-
-	/* This is inline, to optimise the common case, where it's ready instantly */
-	int ret = 0;
-
-	/* 4 read form NOP register should be issued in prior to the read from CDSNControl
-	   see Software Requirement 11.4 item 2. */
-	DoC_Delay(doc, 4);
-
-	if (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B))
-		/* Call the out-of-line routine to wait */
-		ret = _DoC_WaitReady(doc);
-
-	/* issue 2 read from NOP register after reading from CDSNControl register
-	   see Software Requirement 11.4 item 2. */
-	DoC_Delay(doc, 2);
-
-	return ret;
-}
-
-/* DoC_Command: Send a flash command to the flash chip through the CDSN Slow IO register to
-   bypass the internal pipeline. Each of 4 delay cycles (read from the NOP register) is
-   required after writing to CDSN Control register, see Software Requirement 11.4 item 3. */
-
-static int DoC_Command(struct DiskOnChip *doc, unsigned char command,
-			      unsigned char xtraflags)
-{
-	void __iomem *docptr = doc->virtadr;
-
-	if (DoC_is_2000(doc))
-		xtraflags |= CDSN_CTRL_FLASH_IO;
-
-	/* Assert the CLE (Command Latch Enable) line to the flash chip */
-	WriteDOC(xtraflags | CDSN_CTRL_CLE | CDSN_CTRL_CE, docptr, CDSNControl);
-	DoC_Delay(doc, 4);	/* Software requirement 11.4.3 for Millennium */
-
-	if (DoC_is_Millennium(doc))
-		WriteDOC(command, docptr, CDSNSlowIO);
-
-	/* Send the command */
-	WriteDOC_(command, docptr, doc->ioreg);
-	if (DoC_is_Millennium(doc))
-		WriteDOC(command, docptr, WritePipeTerm);
-
-	/* Lower the CLE line */
-	WriteDOC(xtraflags | CDSN_CTRL_CE, docptr, CDSNControl);
-	DoC_Delay(doc, 4);	/* Software requirement 11.4.3 for Millennium */
-
-	/* Wait for the chip to respond - Software requirement 11.4.1 (extended for any command) */
-	return DoC_WaitReady(doc);
-}
-
-/* DoC_Address: Set the current address for the flash chip through the CDSN Slow IO register to
-   bypass the internal pipeline. Each of 4 delay cycles (read from the NOP register) is
-   required after writing to CDSN Control register, see Software Requirement 11.4 item 3. */
-
-static int DoC_Address(struct DiskOnChip *doc, int numbytes, unsigned long ofs,
-		       unsigned char xtraflags1, unsigned char xtraflags2)
-{
-	int i;
-	void __iomem *docptr = doc->virtadr;
-
-	if (DoC_is_2000(doc))
-		xtraflags1 |= CDSN_CTRL_FLASH_IO;
-
-	/* Assert the ALE (Address Latch Enable) line to the flash chip */
-	WriteDOC(xtraflags1 | CDSN_CTRL_ALE | CDSN_CTRL_CE, docptr, CDSNControl);
-
-	DoC_Delay(doc, 4);	/* Software requirement 11.4.3 for Millennium */
-
-	/* Send the address */
-	/* Devices with 256-byte page are addressed as:
-	   Column (bits 0-7), Page (bits 8-15, 16-23, 24-31)
-	   * there is no device on the market with page256
-	   and more than 24 bits.
-	   Devices with 512-byte page are addressed as:
-	   Column (bits 0-7), Page (bits 9-16, 17-24, 25-31)
-	   * 25-31 is sent only if the chip support it.
-	   * bit 8 changes the read command to be sent
-	   (NAND_CMD_READ0 or NAND_CMD_READ1).
-	 */
-
-	if (numbytes == ADDR_COLUMN || numbytes == ADDR_COLUMN_PAGE) {
-		if (DoC_is_Millennium(doc))
-			WriteDOC(ofs & 0xff, docptr, CDSNSlowIO);
-		WriteDOC_(ofs & 0xff, docptr, doc->ioreg);
-	}
-
-	if (doc->page256) {
-		ofs = ofs >> 8;
-	} else {
-		ofs = ofs >> 9;
-	}
-
-	if (numbytes == ADDR_PAGE || numbytes == ADDR_COLUMN_PAGE) {
-		for (i = 0; i < doc->pageadrlen; i++, ofs = ofs >> 8) {
-			if (DoC_is_Millennium(doc))
-				WriteDOC(ofs & 0xff, docptr, CDSNSlowIO);
-			WriteDOC_(ofs & 0xff, docptr, doc->ioreg);
-		}
-	}
-
-	if (DoC_is_Millennium(doc))
-		WriteDOC(ofs & 0xff, docptr, WritePipeTerm);
-
-	DoC_Delay(doc, 2);	/* Needed for some slow flash chips. mf. */
-
-	/* FIXME: The SlowIO's for millennium could be replaced by
-	   a single WritePipeTerm here. mf. */
-
-	/* Lower the ALE line */
-	WriteDOC(xtraflags1 | xtraflags2 | CDSN_CTRL_CE, docptr,
-		 CDSNControl);
-
-	DoC_Delay(doc, 4);	/* Software requirement 11.4.3 for Millennium */
-
-	/* Wait for the chip to respond - Software requirement 11.4.1 */
-	return DoC_WaitReady(doc);
-}
-
-/* Read a buffer from DoC, taking care of Millennium odditys */
-static void DoC_ReadBuf(struct DiskOnChip *doc, u_char * buf, int len)
-{
-	volatile int dummy;
-	int modulus = 0xffff;
-	void __iomem *docptr = doc->virtadr;
-	int i;
-
-	if (len <= 0)
-		return;
-
-	if (DoC_is_Millennium(doc)) {
-		/* Read the data via the internal pipeline through CDSN IO register,
-		   see Pipelined Read Operations 11.3 */
-		dummy = ReadDOC(docptr, ReadPipeInit);
-
-		/* Millennium should use the LastDataRead register - Pipeline Reads */
-		len--;
-
-		/* This is needed for correctly ECC calculation */
-		modulus = 0xff;
-	}
-
-	for (i = 0; i < len; i++)
-		buf[i] = ReadDOC_(docptr, doc->ioreg + (i & modulus));
-
-	if (DoC_is_Millennium(doc)) {
-		buf[i] = ReadDOC(docptr, LastDataRead);
-	}
-}
-
-/* Write a buffer to DoC, taking care of Millennium odditys */
-static void DoC_WriteBuf(struct DiskOnChip *doc, const u_char * buf, int len)
-{
-	void __iomem *docptr = doc->virtadr;
-	int i;
-
-	if (len <= 0)
-		return;
-
-	for (i = 0; i < len; i++)
-		WriteDOC_(buf[i], docptr, doc->ioreg + i);
-
-	if (DoC_is_Millennium(doc)) {
-		WriteDOC(0x00, docptr, WritePipeTerm);
-	}
-}
-
-
-/* DoC_SelectChip: Select a given flash chip within the current floor */
-
-static inline int DoC_SelectChip(struct DiskOnChip *doc, int chip)
-{
-	void __iomem *docptr = doc->virtadr;
-
-	/* Software requirement 11.4.4 before writing DeviceSelect */
-	/* Deassert the CE line to eliminate glitches on the FCE# outputs */
-	WriteDOC(CDSN_CTRL_WP, docptr, CDSNControl);
-	DoC_Delay(doc, 4);	/* Software requirement 11.4.3 for Millennium */
-
-	/* Select the individual flash chip requested */
-	WriteDOC(chip, docptr, CDSNDeviceSelect);
-	DoC_Delay(doc, 4);
-
-	/* Reassert the CE line */
-	WriteDOC(CDSN_CTRL_CE | CDSN_CTRL_FLASH_IO | CDSN_CTRL_WP, docptr,
-		 CDSNControl);
-	DoC_Delay(doc, 4);	/* Software requirement 11.4.3 for Millennium */
-
-	/* Wait for it to be ready */
-	return DoC_WaitReady(doc);
-}
-
-/* DoC_SelectFloor: Select a given floor (bank of flash chips) */
-
-static inline int DoC_SelectFloor(struct DiskOnChip *doc, int floor)
-{
-	void __iomem *docptr = doc->virtadr;
-
-	/* Select the floor (bank) of chips required */
-	WriteDOC(floor, docptr, FloorSelect);
-
-	/* Wait for the chip to be ready */
-	return DoC_WaitReady(doc);
-}
-
-/* DoC_IdentChip: Identify a given NAND chip given {floor,chip} */
-
-static int DoC_IdentChip(struct DiskOnChip *doc, int floor, int chip)
-{
-	int mfr, id, i, j;
-	volatile char dummy;
-
-	/* Page in the required floor/chip */
-	DoC_SelectFloor(doc, floor);
-	DoC_SelectChip(doc, chip);
-
-	/* Reset the chip */
-	if (DoC_Command(doc, NAND_CMD_RESET, CDSN_CTRL_WP)) {
-		DEBUG(MTD_DEBUG_LEVEL2,
-		      "DoC_Command (reset) for %d,%d returned true\n",
-		      floor, chip);
-		return 0;
-	}
-
-
-	/* Read the NAND chip ID: 1. Send ReadID command */
-	if (DoC_Command(doc, NAND_CMD_READID, CDSN_CTRL_WP)) {
-		DEBUG(MTD_DEBUG_LEVEL2,
-		      "DoC_Command (ReadID) for %d,%d returned true\n",
-		      floor, chip);
-		return 0;
-	}
-
-	/* Read the NAND chip ID: 2. Send address byte zero */
-	DoC_Address(doc, ADDR_COLUMN, 0, CDSN_CTRL_WP, 0);
-
-	/* Read the manufacturer and device id codes from the device */
-
-	if (DoC_is_Millennium(doc)) {
-		DoC_Delay(doc, 2);
-		dummy = ReadDOC(doc->virtadr, ReadPipeInit);
-		mfr = ReadDOC(doc->virtadr, LastDataRead);
-
-		DoC_Delay(doc, 2);
-		dummy = ReadDOC(doc->virtadr, ReadPipeInit);
-		id = ReadDOC(doc->virtadr, LastDataRead);
-	} else {
-		/* CDSN Slow IO register see Software Req 11.4 item 5. */
-		dummy = ReadDOC(doc->virtadr, CDSNSlowIO);
-		DoC_Delay(doc, 2);
-		mfr = ReadDOC_(doc->virtadr, doc->ioreg);
-
-		/* CDSN Slow IO register see Software Req 11.4 item 5. */
-		dummy = ReadDOC(doc->virtadr, CDSNSlowIO);
-		DoC_Delay(doc, 2);
-		id = ReadDOC_(doc->virtadr, doc->ioreg);
-	}
-
-	/* No response - return failure */
-	if (mfr == 0xff || mfr == 0)
-		return 0;
-
-	/* Check it's the same as the first chip we identified.
-	 * M-Systems say that any given DiskOnChip device should only
-	 * contain _one_ type of flash part, although that's not a
-	 * hardware restriction. */
-	if (doc->mfr) {
-		if (doc->mfr == mfr && doc->id == id)
-			return 1;	/* This is the same as the first */
-		else
-			printk(KERN_WARNING
-			       "Flash chip at floor %d, chip %d is different:\n",
-			       floor, chip);
-	}
-
-	/* Print and store the manufacturer and ID codes. */
-	for (i = 0; nand_flash_ids[i].name != NULL; i++) {
-		if (id == nand_flash_ids[i].id) {
-			/* Try to identify manufacturer */
-			for (j = 0; nand_manuf_ids[j].id != 0x0; j++) {
-				if (nand_manuf_ids[j].id == mfr)
-					break;
-			}
-			printk(KERN_INFO
-			       "Flash chip found: Manufacturer ID: %2.2X, "
-			       "Chip ID: %2.2X (%s:%s)\n", mfr, id,
-			       nand_manuf_ids[j].name, nand_flash_ids[i].name);
-			if (!doc->mfr) {
-				doc->mfr = mfr;
-				doc->id = id;
-				doc->chipshift =
-					ffs((nand_flash_ids[i].chipsize << 20)) - 1;
-				doc->page256 = (nand_flash_ids[i].pagesize == 256) ? 1 : 0;
-				doc->pageadrlen = doc->chipshift > 25 ? 3 : 2;
-				doc->erasesize =
-				    nand_flash_ids[i].erasesize;
-				return 1;
-			}
-			return 0;
-		}
-	}
-
-
-	/* We haven't fully identified the chip. Print as much as we know. */
-	printk(KERN_WARNING "Unknown flash chip found: %2.2X %2.2X\n",
-	       id, mfr);
-
-	printk(KERN_WARNING "Please report to dwmw2@infradead.org\n");
-	return 0;
-}
-
-/* DoC_ScanChips: Find all NAND chips present in a DiskOnChip, and identify them */
-
-static void DoC_ScanChips(struct DiskOnChip *this, int maxchips)
-{
-	int floor, chip;
-	int numchips[MAX_FLOORS];
-	int ret = 1;
-
-	this->numchips = 0;
-	this->mfr = 0;
-	this->id = 0;
-
-	/* For each floor, find the number of valid chips it contains */
-	for (floor = 0; floor < MAX_FLOORS; floor++) {
-		ret = 1;
-		numchips[floor] = 0;
-		for (chip = 0; chip < maxchips && ret != 0; chip++) {
-
-			ret = DoC_IdentChip(this, floor, chip);
-			if (ret) {
-				numchips[floor]++;
-				this->numchips++;
-			}
-		}
-	}
-
-	/* If there are none at all that we recognise, bail */
-	if (!this->numchips) {
-		printk(KERN_NOTICE "No flash chips recognised.\n");
-		return;
-	}
-
-	/* Allocate an array to hold the information for each chip */
-	this->chips = kmalloc(sizeof(struct Nand) * this->numchips, GFP_KERNEL);
-	if (!this->chips) {
-		printk(KERN_NOTICE "No memory for allocating chip info structures\n");
-		return;
-	}
-
-	ret = 0;
-
-	/* Fill out the chip array with {floor, chipno} for each
-	 * detected chip in the device. */
-	for (floor = 0; floor < MAX_FLOORS; floor++) {
-		for (chip = 0; chip < numchips[floor]; chip++) {
-			this->chips[ret].floor = floor;
-			this->chips[ret].chip = chip;
-			this->chips[ret].curadr = 0;
-			this->chips[ret].curmode = 0x50;
-			ret++;
-		}
-	}
-
-	/* Calculate and print the total size of the device */
-	this->totlen = this->numchips * (1 << this->chipshift);
-
-	printk(KERN_INFO "%d flash chips found. Total DiskOnChip size: %ld MiB\n",
-	       this->numchips, this->totlen >> 20);
-}
-
-static int DoC2k_is_alias(struct DiskOnChip *doc1, struct DiskOnChip *doc2)
-{
-	int tmp1, tmp2, retval;
-	if (doc1->physadr == doc2->physadr)
-		return 1;
-
-	/* Use the alias resolution register which was set aside for this
-	 * purpose. If it's value is the same on both chips, they might
-	 * be the same chip, and we write to one and check for a change in
-	 * the other. It's unclear if this register is usuable in the
-	 * DoC 2000 (it's in the Millennium docs), but it seems to work. */
-	tmp1 = ReadDOC(doc1->virtadr, AliasResolution);
-	tmp2 = ReadDOC(doc2->virtadr, AliasResolution);
-	if (tmp1 != tmp2)
-		return 0;
-
-	WriteDOC((tmp1 + 1) % 0xff, doc1->virtadr, AliasResolution);
-	tmp2 = ReadDOC(doc2->virtadr, AliasResolution);
-	if (tmp2 == (tmp1 + 1) % 0xff)
-		retval = 1;
-	else
-		retval = 0;
-
-	/* Restore register contents.  May not be necessary, but do it just to
-	 * be safe. */
-	WriteDOC(tmp1, doc1->virtadr, AliasResolution);
-
-	return retval;
-}
-
-/* This routine is found from the docprobe code by symbol_get(),
- * which will bump the use count of this module. */
-void DoC2k_init(struct mtd_info *mtd)
-{
-	struct DiskOnChip *this = mtd->priv;
-	struct DiskOnChip *old = NULL;
-	int maxchips;
-
-	/* We must avoid being called twice for the same device. */
-
-	if (doc2klist)
-		old = doc2klist->priv;
-
-	while (old) {
-		if (DoC2k_is_alias(old, this)) {
-			printk(KERN_NOTICE
-			       "Ignoring DiskOnChip 2000 at 0x%lX - already configured\n",
-			       this->physadr);
-			iounmap(this->virtadr);
-			kfree(mtd);
-			return;
-		}
-		if (old->nextdoc)
-			old = old->nextdoc->priv;
-		else
-			old = NULL;
-	}
-
-
-	switch (this->ChipID) {
-	case DOC_ChipID_Doc2kTSOP:
-		mtd->name = "DiskOnChip 2000 TSOP";
-		this->ioreg = DoC_Mil_CDSN_IO;
-		/* Pretend it's a Millennium */
-		this->ChipID = DOC_ChipID_DocMil;
-		maxchips = MAX_CHIPS;
-		break;
-	case DOC_ChipID_Doc2k:
-		mtd->name = "DiskOnChip 2000";
-		this->ioreg = DoC_2k_CDSN_IO;
-		maxchips = MAX_CHIPS;
-		break;
-	case DOC_ChipID_DocMil:
-		mtd->name = "DiskOnChip Millennium";
-		this->ioreg = DoC_Mil_CDSN_IO;
-		maxchips = MAX_CHIPS_MIL;
-		break;
-	default:
-		printk("Unknown ChipID 0x%02x\n", this->ChipID);
-		kfree(mtd);
-		iounmap(this->virtadr);
-		return;
-	}
-
-	printk(KERN_NOTICE "%s found at address 0x%lX\n", mtd->name,
-	       this->physadr);
-
-	mtd->type = MTD_NANDFLASH;
-	mtd->flags = MTD_CAP_NANDFLASH;
-	mtd->size = 0;
-	mtd->erasesize = 0;
-	mtd->writesize = 512;
-	mtd->oobsize = 16;
-	mtd->owner = THIS_MODULE;
-	mtd->erase = doc_erase;
-	mtd->point = NULL;
-	mtd->unpoint = NULL;
-	mtd->read = doc_read;
-	mtd->write = doc_write;
-	mtd->read_oob = doc_read_oob;
-	mtd->write_oob = doc_write_oob;
-	mtd->sync = NULL;
-
-	this->totlen = 0;
-	this->numchips = 0;
-
-	this->curfloor = -1;
-	this->curchip = -1;
-	mutex_init(&this->lock);
-
-	/* Ident all the chips present. */
-	DoC_ScanChips(this, maxchips);
-
-	if (!this->totlen) {
-		kfree(mtd);
-		iounmap(this->virtadr);
-	} else {
-		this->nextdoc = doc2klist;
-		doc2klist = mtd;
-		mtd->size = this->totlen;
-		mtd->erasesize = this->erasesize;
-		add_mtd_device(mtd);
-		return;
-	}
-}
-EXPORT_SYMBOL_GPL(DoC2k_init);
-
-static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
-		    size_t * retlen, u_char * buf)
-{
-	struct DiskOnChip *this = mtd->priv;
-	void __iomem *docptr = this->virtadr;
-	struct Nand *mychip;
-	unsigned char syndrome[6], eccbuf[6];
-	volatile char dummy;
-	int i, len256 = 0, ret=0;
-	size_t left = len;
-
-	/* Don't allow read past end of device */
-	if (from >= this->totlen)
-		return -EINVAL;
-
-	mutex_lock(&this->lock);
-
-	*retlen = 0;
-	while (left) {
-		len = left;
-
-		/* Don't allow a single read to cross a 512-byte block boundary */
-		if (from + len > ((from | 0x1ff) + 1))
-			len = ((from | 0x1ff) + 1) - from;
-
-		/* The ECC will not be calculated correctly if less than 512 is read */
-		if (len != 0x200)
-			printk(KERN_WARNING
-			       "ECC needs a full sector read (adr: %lx size %lx)\n",
-			       (long) from, (long) len);
-
-		/* printk("DoC_Read (adr: %lx size %lx)\n", (long) from, (long) len); */
-
-
-		/* Find the chip which is to be used and select it */
-		mychip = &this->chips[from >> (this->chipshift)];
-
-		if (this->curfloor != mychip->floor) {
-			DoC_SelectFloor(this, mychip->floor);
-			DoC_SelectChip(this, mychip->chip);
-		} else if (this->curchip != mychip->chip) {
-			DoC_SelectChip(this, mychip->chip);
-		}
-
-		this->curfloor = mychip->floor;
-		this->curchip = mychip->chip;
-
-		DoC_Command(this,
-			    (!this->page256
-			     && (from & 0x100)) ? NAND_CMD_READ1 : NAND_CMD_READ0,
-			    CDSN_CTRL_WP);
-		DoC_Address(this, ADDR_COLUMN_PAGE, from, CDSN_CTRL_WP,
-			    CDSN_CTRL_ECC_IO);
-
-		/* Prime the ECC engine */
-		WriteDOC(DOC_ECC_RESET, docptr, ECCConf);
-		WriteDOC(DOC_ECC_EN, docptr, ECCConf);
-
-		/* treat crossing 256-byte sector for 2M x 8bits devices */
-		if (this->page256 && from + len > (from | 0xff) + 1) {
-			len256 = (from | 0xff) + 1 - from;
-			DoC_ReadBuf(this, buf, len256);
-
-			DoC_Command(this, NAND_CMD_READ0, CDSN_CTRL_WP);
-			DoC_Address(this, ADDR_COLUMN_PAGE, from + len256,
-				    CDSN_CTRL_WP, CDSN_CTRL_ECC_IO);
-		}
-
-		DoC_ReadBuf(this, &buf[len256], len - len256);
-
-		/* Let the caller know we completed it */
-		*retlen += len;
-
-		/* Read the ECC data through the DiskOnChip ECC logic */
-		/* Note: this will work even with 2M x 8bit devices as   */
-		/*       they have 8 bytes of OOB per 256 page. mf.      */
-		DoC_ReadBuf(this, eccbuf, 6);
-
-		/* Flush the pipeline */
-		if (DoC_is_Millennium(this)) {
-			dummy = ReadDOC(docptr, ECCConf);
-			dummy = ReadDOC(docptr, ECCConf);
-			i = ReadDOC(docptr, ECCConf);
-		} else {
-			dummy = ReadDOC(docptr, 2k_ECCStatus);
-			dummy = ReadDOC(docptr, 2k_ECCStatus);
-			i = ReadDOC(docptr, 2k_ECCStatus);
-		}
-
-		/* Check the ECC Status */
-		if (i & 0x80) {
-			int nb_errors;
-			/* There was an ECC error */
-#ifdef ECC_DEBUG
-			printk(KERN_ERR "DiskOnChip ECC Error: Read at %lx\n", (long)from);
-#endif
-			/* Read the ECC syndrom through the DiskOnChip ECC
-			   logic.  These syndrome will be all ZERO when there
-			   is no error */
-			for (i = 0; i < 6; i++) {
-				syndrome[i] =
-					ReadDOC(docptr, ECCSyndrome0 + i);
-			}
-			nb_errors = doc_decode_ecc(buf, syndrome);
-
-#ifdef ECC_DEBUG
-			printk(KERN_ERR "Errors corrected: %x\n", nb_errors);
-#endif
-			if (nb_errors < 0) {
-				/* We return error, but have actually done the
-				   read. Not that this can be told to
-				   user-space, via sys_read(), but at least
-				   MTD-aware stuff can know about it by
-				   checking *retlen */
-				ret = -EIO;
-			}
-		}
-
-#ifdef PSYCHO_DEBUG
-		printk(KERN_DEBUG "ECC DATA at %lxB: %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
-		       (long)from, eccbuf[0], eccbuf[1], eccbuf[2],
-		       eccbuf[3], eccbuf[4], eccbuf[5]);
-#endif
-
-		/* disable the ECC engine */
-		WriteDOC(DOC_ECC_DIS, docptr , ECCConf);
-
-		/* according to 11.4.1, we need to wait for the busy line
-	         * drop if we read to the end of the page.  */
-		if(0 == ((from + len) & 0x1ff))
-		{
-		    DoC_WaitReady(this);
-		}
-
-		from += len;
-		left -= len;
-		buf += len;
-	}
-
-	mutex_unlock(&this->lock);
-
-	return ret;
-}
-
-static int doc_write(struct mtd_info *mtd, loff_t to, size_t len,
-		     size_t * retlen, const u_char * buf)
-{
-	struct DiskOnChip *this = mtd->priv;
-	int di; /* Yes, DI is a hangover from when I was disassembling the binary driver */
-	void __iomem *docptr = this->virtadr;
-	unsigned char eccbuf[6];
-	volatile char dummy;
-	int len256 = 0;
-	struct Nand *mychip;
-	size_t left = len;
-	int status;
-
-	/* Don't allow write past end of device */
-	if (to >= this->totlen)
-		return -EINVAL;
-
-	mutex_lock(&this->lock);
-
-	*retlen = 0;
-	while (left) {
-		len = left;
-
-		/* Don't allow a single write to cross a 512-byte block boundary */
-		if (to + len > ((to | 0x1ff) + 1))
-			len = ((to | 0x1ff) + 1) - to;
-
-		/* The ECC will not be calculated correctly if less than 512 is written */
-/* DBB-
-		if (len != 0x200 && eccbuf)
-			printk(KERN_WARNING
-			       "ECC needs a full sector write (adr: %lx size %lx)\n",
-			       (long) to, (long) len);
-   -DBB */
-
-		/* printk("DoC_Write (adr: %lx size %lx)\n", (long) to, (long) len); */
-
-		/* Find the chip which is to be used and select it */
-		mychip = &this->chips[to >> (this->chipshift)];
-
-		if (this->curfloor != mychip->floor) {
-			DoC_SelectFloor(this, mychip->floor);
-			DoC_SelectChip(this, mychip->chip);
-		} else if (this->curchip != mychip->chip) {
-			DoC_SelectChip(this, mychip->chip);
-		}
-
-		this->curfloor = mychip->floor;
-		this->curchip = mychip->chip;
-
-		/* Set device to main plane of flash */
-		DoC_Command(this, NAND_CMD_RESET, CDSN_CTRL_WP);
-		DoC_Command(this,
-			    (!this->page256
-			     && (to & 0x100)) ? NAND_CMD_READ1 : NAND_CMD_READ0,
-			    CDSN_CTRL_WP);
-
-		DoC_Command(this, NAND_CMD_SEQIN, 0);
-		DoC_Address(this, ADDR_COLUMN_PAGE, to, 0, CDSN_CTRL_ECC_IO);
-
-		/* Prime the ECC engine */
-		WriteDOC(DOC_ECC_RESET, docptr, ECCConf);
-		WriteDOC(DOC_ECC_EN | DOC_ECC_RW, docptr, ECCConf);
-
-		/* treat crossing 256-byte sector for 2M x 8bits devices */
-		if (this->page256 && to + len > (to | 0xff) + 1) {
-			len256 = (to | 0xff) + 1 - to;
-			DoC_WriteBuf(this, buf, len256);
-
-			DoC_Command(this, NAND_CMD_PAGEPROG, 0);
-
-			DoC_Command(this, NAND_CMD_STATUS, CDSN_CTRL_WP);
-			/* There's an implicit DoC_WaitReady() in DoC_Command */
-
-			dummy = ReadDOC(docptr, CDSNSlowIO);
-			DoC_Delay(this, 2);
-
-			if (ReadDOC_(docptr, this->ioreg) & 1) {
-				printk(KERN_ERR "Error programming flash\n");
-				/* Error in programming */
-				*retlen = 0;
-				mutex_unlock(&this->lock);
-				return -EIO;
-			}
-
-			DoC_Command(this, NAND_CMD_SEQIN, 0);
-			DoC_Address(this, ADDR_COLUMN_PAGE, to + len256, 0,
-				    CDSN_CTRL_ECC_IO);
-		}
-
-		DoC_WriteBuf(this, &buf[len256], len - len256);
-
-		WriteDOC(CDSN_CTRL_ECC_IO | CDSN_CTRL_CE, docptr, CDSNControl);
-
-		if (DoC_is_Millennium(this)) {
-			WriteDOC(0, docptr, NOP);
-			WriteDOC(0, docptr, NOP);
-			WriteDOC(0, docptr, NOP);
-		} else {
-			WriteDOC_(0, docptr, this->ioreg);
-			WriteDOC_(0, docptr, this->ioreg);
-			WriteDOC_(0, docptr, this->ioreg);
-		}
-
-		WriteDOC(CDSN_CTRL_ECC_IO | CDSN_CTRL_FLASH_IO | CDSN_CTRL_CE, docptr,
-			 CDSNControl);
-
-		/* Read the ECC data through the DiskOnChip ECC logic */
-		for (di = 0; di < 6; di++) {
-			eccbuf[di] = ReadDOC(docptr, ECCSyndrome0 + di);
-		}
-
-		/* Reset the ECC engine */
-		WriteDOC(DOC_ECC_DIS, docptr, ECCConf);
-
-#ifdef PSYCHO_DEBUG
-		printk
-			("OOB data at %lx is %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
-			 (long) to, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3],
-			 eccbuf[4], eccbuf[5]);
-#endif
-		DoC_Command(this, NAND_CMD_PAGEPROG, 0);
-
-		DoC_Command(this, NAND_CMD_STATUS, CDSN_CTRL_WP);
-		/* There's an implicit DoC_WaitReady() in DoC_Command */
-
-		if (DoC_is_Millennium(this)) {
-			ReadDOC(docptr, ReadPipeInit);
-			status = ReadDOC(docptr, LastDataRead);
-		} else {
-			dummy = ReadDOC(docptr, CDSNSlowIO);
-			DoC_Delay(this, 2);
-			status = ReadDOC_(docptr, this->ioreg);
-		}
-
-		if (status & 1) {
-			printk(KERN_ERR "Error programming flash\n");
-			/* Error in programming */
-			*retlen = 0;
-			mutex_unlock(&this->lock);
-			return -EIO;
-		}
-
-		/* Let the caller know we completed it */
-		*retlen += len;
-
-		{
-			unsigned char x[8];
-			size_t dummy;
-			int ret;
-
-			/* Write the ECC data to flash */
-			for (di=0; di<6; di++)
-				x[di] = eccbuf[di];
-
-			x[6]=0x55;
-			x[7]=0x55;
-
-			ret = doc_write_oob_nolock(mtd, to, 8, &dummy, x);
-			if (ret) {
-				mutex_unlock(&this->lock);
-				return ret;
-			}
-		}
-
-		to += len;
-		left -= len;
-		buf += len;
-	}
-
-	mutex_unlock(&this->lock);
-	return 0;
-}
-
-static int doc_read_oob(struct mtd_info *mtd, loff_t ofs,
-			struct mtd_oob_ops *ops)
-{
-	struct DiskOnChip *this = mtd->priv;
-	int len256 = 0, ret;
-	struct Nand *mychip;
-	uint8_t *buf = ops->oobbuf;
-	size_t len = ops->len;
-
-	BUG_ON(ops->mode != MTD_OOB_PLACE);
-
-	ofs += ops->ooboffs;
-
-	mutex_lock(&this->lock);
-
-	mychip = &this->chips[ofs >> this->chipshift];
-
-	if (this->curfloor != mychip->floor) {
-		DoC_SelectFloor(this, mychip->floor);
-		DoC_SelectChip(this, mychip->chip);
-	} else if (this->curchip != mychip->chip) {
-		DoC_SelectChip(this, mychip->chip);
-	}
-	this->curfloor = mychip->floor;
-	this->curchip = mychip->chip;
-
-	/* update address for 2M x 8bit devices. OOB starts on the second */
-	/* page to maintain compatibility with doc_read_ecc. */
-	if (this->page256) {
-		if (!(ofs & 0x8))
-			ofs += 0x100;
-		else
-			ofs -= 0x8;
-	}
-
-	DoC_Command(this, NAND_CMD_READOOB, CDSN_CTRL_WP);
-	DoC_Address(this, ADDR_COLUMN_PAGE, ofs, CDSN_CTRL_WP, 0);
-
-	/* treat crossing 8-byte OOB data for 2M x 8bit devices */
-	/* Note: datasheet says it should automaticaly wrap to the */
-	/*       next OOB block, but it didn't work here. mf.      */
-	if (this->page256 && ofs + len > (ofs | 0x7) + 1) {
-		len256 = (ofs | 0x7) + 1 - ofs;
-		DoC_ReadBuf(this, buf, len256);
-
-		DoC_Command(this, NAND_CMD_READOOB, CDSN_CTRL_WP);
-		DoC_Address(this, ADDR_COLUMN_PAGE, ofs & (~0x1ff),
-			    CDSN_CTRL_WP, 0);
-	}
-
-	DoC_ReadBuf(this, &buf[len256], len - len256);
-
-	ops->retlen = len;
-	/* Reading the full OOB data drops us off of the end of the page,
-         * causing the flash device to go into busy mode, so we need
-         * to wait until ready 11.4.1 and Toshiba TC58256FT docs */
-
-	ret = DoC_WaitReady(this);
-
-	mutex_unlock(&this->lock);
-	return ret;
-
-}
-
-static int doc_write_oob_nolock(struct mtd_info *mtd, loff_t ofs, size_t len,
-				size_t * retlen, const u_char * buf)
-{
-	struct DiskOnChip *this = mtd->priv;
-	int len256 = 0;
-	void __iomem *docptr = this->virtadr;
-	struct Nand *mychip = &this->chips[ofs >> this->chipshift];
-	volatile int dummy;
-	int status;
-
-	//      printk("doc_write_oob(%lx, %d): %2.2X %2.2X %2.2X %2.2X ... %2.2X %2.2X .. %2.2X %2.2X\n",(long)ofs, len,
-	//   buf[0], buf[1], buf[2], buf[3], buf[8], buf[9], buf[14],buf[15]);
-
-	/* Find the chip which is to be used and select it */
-	if (this->curfloor != mychip->floor) {
-		DoC_SelectFloor(this, mychip->floor);
-		DoC_SelectChip(this, mychip->chip);
-	} else if (this->curchip != mychip->chip) {
-		DoC_SelectChip(this, mychip->chip);
-	}
-	this->curfloor = mychip->floor;
-	this->curchip = mychip->chip;
-
-	/* disable the ECC engine */
-	WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
-	WriteDOC (DOC_ECC_DIS, docptr, ECCConf);
-
-	/* Reset the chip, see Software Requirement 11.4 item 1. */
-	DoC_Command(this, NAND_CMD_RESET, CDSN_CTRL_WP);
-
-	/* issue the Read2 command to set the pointer to the Spare Data Area. */
-	DoC_Command(this, NAND_CMD_READOOB, CDSN_CTRL_WP);
-
-	/* update address for 2M x 8bit devices. OOB starts on the second */
-	/* page to maintain compatibility with doc_read_ecc. */
-	if (this->page256) {
-		if (!(ofs & 0x8))
-			ofs += 0x100;
-		else
-			ofs -= 0x8;
-	}
-
-	/* issue the Serial Data In command to initial the Page Program process */
-	DoC_Command(this, NAND_CMD_SEQIN, 0);
-	DoC_Address(this, ADDR_COLUMN_PAGE, ofs, 0, 0);
-
-	/* treat crossing 8-byte OOB data for 2M x 8bit devices */
-	/* Note: datasheet says it should automaticaly wrap to the */
-	/*       next OOB block, but it didn't work here. mf.      */
-	if (this->page256 && ofs + len > (ofs | 0x7) + 1) {
-		len256 = (ofs | 0x7) + 1 - ofs;
-		DoC_WriteBuf(this, buf, len256);
-
-		DoC_Command(this, NAND_CMD_PAGEPROG, 0);
-		DoC_Command(this, NAND_CMD_STATUS, 0);
-		/* DoC_WaitReady() is implicit in DoC_Command */
-
-		if (DoC_is_Millennium(this)) {
-			ReadDOC(docptr, ReadPipeInit);
-			status = ReadDOC(docptr, LastDataRead);
-		} else {
-			dummy = ReadDOC(docptr, CDSNSlowIO);
-			DoC_Delay(this, 2);
-			status = ReadDOC_(docptr, this->ioreg);
-		}
-
-		if (status & 1) {
-			printk(KERN_ERR "Error programming oob data\n");
-			/* There was an error */
-			*retlen = 0;
-			return -EIO;
-		}
-		DoC_Command(this, NAND_CMD_SEQIN, 0);
-		DoC_Address(this, ADDR_COLUMN_PAGE, ofs & (~0x1ff), 0, 0);
-	}
-
-	DoC_WriteBuf(this, &buf[len256], len - len256);
-
-	DoC_Command(this, NAND_CMD_PAGEPROG, 0);
-	DoC_Command(this, NAND_CMD_STATUS, 0);
-	/* DoC_WaitReady() is implicit in DoC_Command */
-
-	if (DoC_is_Millennium(this)) {
-		ReadDOC(docptr, ReadPipeInit);
-		status = ReadDOC(docptr, LastDataRead);
-	} else {
-		dummy = ReadDOC(docptr, CDSNSlowIO);
-		DoC_Delay(this, 2);
-		status = ReadDOC_(docptr, this->ioreg);
-	}
-
-	if (status & 1) {
-		printk(KERN_ERR "Error programming oob data\n");
-		/* There was an error */
-		*retlen = 0;
-		return -EIO;
-	}
-
-	*retlen = len;
-	return 0;
-
-}
-
-static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
-			 struct mtd_oob_ops *ops)
-{
-	struct DiskOnChip *this = mtd->priv;
-	int ret;
-
-	BUG_ON(ops->mode != MTD_OOB_PLACE);
-
-	mutex_lock(&this->lock);
-	ret = doc_write_oob_nolock(mtd, ofs + ops->ooboffs, ops->len,
-				   &ops->retlen, ops->oobbuf);
-
-	mutex_unlock(&this->lock);
-	return ret;
-}
-
-static int doc_erase(struct mtd_info *mtd, struct erase_info *instr)
-{
-	struct DiskOnChip *this = mtd->priv;
-	__u32 ofs = instr->addr;
-	__u32 len = instr->len;
-	volatile int dummy;
-	void __iomem *docptr = this->virtadr;
-	struct Nand *mychip;
-	int status;
-
- 	mutex_lock(&this->lock);
-
-	if (ofs & (mtd->erasesize-1) || len & (mtd->erasesize-1)) {
-		mutex_unlock(&this->lock);
-		return -EINVAL;
-	}
-
-	instr->state = MTD_ERASING;
-
-	/* FIXME: Do this in the background. Use timers or schedule_task() */
-	while(len) {
-		mychip = &this->chips[ofs >> this->chipshift];
-
-		if (this->curfloor != mychip->floor) {
-			DoC_SelectFloor(this, mychip->floor);
-			DoC_SelectChip(this, mychip->chip);
-		} else if (this->curchip != mychip->chip) {
-			DoC_SelectChip(this, mychip->chip);
-		}
-		this->curfloor = mychip->floor;
-		this->curchip = mychip->chip;
-
-		DoC_Command(this, NAND_CMD_ERASE1, 0);
-		DoC_Address(this, ADDR_PAGE, ofs, 0, 0);
-		DoC_Command(this, NAND_CMD_ERASE2, 0);
-
-		DoC_Command(this, NAND_CMD_STATUS, CDSN_CTRL_WP);
-
-		if (DoC_is_Millennium(this)) {
-			ReadDOC(docptr, ReadPipeInit);
-			status = ReadDOC(docptr, LastDataRead);
-		} else {
-			dummy = ReadDOC(docptr, CDSNSlowIO);
-			DoC_Delay(this, 2);
-			status = ReadDOC_(docptr, this->ioreg);
-		}
-
-		if (status & 1) {
-			printk(KERN_ERR "Error erasing at 0x%x\n", ofs);
-			/* There was an error */
-			instr->state = MTD_ERASE_FAILED;
-			goto callback;
-		}
-		ofs += mtd->erasesize;
-		len -= mtd->erasesize;
-	}
-	instr->state = MTD_ERASE_DONE;
-
- callback:
-	mtd_erase_callback(instr);
-
-	mutex_unlock(&this->lock);
-	return 0;
-}
-
-
-/****************************************************************************
- *
- * Module stuff
- *
- ****************************************************************************/
-
-static void __exit cleanup_doc2000(void)
-{
-	struct mtd_info *mtd;
-	struct DiskOnChip *this;
-
-	while ((mtd = doc2klist)) {
-		this = mtd->priv;
-		doc2klist = this->nextdoc;
-
-		del_mtd_device(mtd);
-
-		iounmap(this->virtadr);
-		kfree(this->chips);
-		kfree(mtd);
-	}
-}
-
-module_exit(cleanup_doc2000);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org> et al.");
-MODULE_DESCRIPTION("MTD driver for DiskOnChip 2000 and Millennium");
-
diff --git a/drivers/mtd/devices/doc2001.c b/drivers/mtd/devices/doc2001.c
deleted file mode 100644
index 0990f780362..00000000000
--- a/drivers/mtd/devices/doc2001.c
+++ /dev/null
@@ -1,841 +0,0 @@
-
-/*
- * Linux driver for Disk-On-Chip Millennium
- * (c) 1999 Machine Vision Holdings, Inc.
- * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/errno.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/bitops.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/doc2000.h>
-
-/* #define ECC_DEBUG */
-
-/* I have no idea why some DoC chips can not use memcop_form|to_io().
- * This may be due to the different revisions of the ASIC controller built-in or
- * simplily a QA/Bug issue. Who knows ?? If you have trouble, please uncomment
- * this:*/
-#undef USE_MEMCPY
-
-static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
-		    size_t *retlen, u_char *buf);
-static int doc_write(struct mtd_info *mtd, loff_t to, size_t len,
-		     size_t *retlen, const u_char *buf);
-static int doc_read_oob(struct mtd_info *mtd, loff_t ofs,
-			struct mtd_oob_ops *ops);
-static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
-			 struct mtd_oob_ops *ops);
-static int doc_erase (struct mtd_info *mtd, struct erase_info *instr);
-
-static struct mtd_info *docmillist = NULL;
-
-/* Perform the required delay cycles by reading from the NOP register */
-static void DoC_Delay(void __iomem * docptr, unsigned short cycles)
-{
-	volatile char dummy;
-	int i;
-
-	for (i = 0; i < cycles; i++)
-		dummy = ReadDOC(docptr, NOP);
-}
-
-/* DOC_WaitReady: Wait for RDY line to be asserted by the flash chip */
-static int _DoC_WaitReady(void __iomem * docptr)
-{
-	unsigned short c = 0xffff;
-
-	DEBUG(MTD_DEBUG_LEVEL3,
-	      "_DoC_WaitReady called for out-of-line wait\n");
-
-	/* Out-of-line routine to wait for chip response */
-	while (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B) && --c)
-		;
-
-	if (c == 0)
-		DEBUG(MTD_DEBUG_LEVEL2, "_DoC_WaitReady timed out.\n");
-
-	return (c == 0);
-}
-
-static inline int DoC_WaitReady(void __iomem * docptr)
-{
-	/* This is inline, to optimise the common case, where it's ready instantly */
-	int ret = 0;
-
-	/* 4 read form NOP register should be issued in prior to the read from CDSNControl
-	   see Software Requirement 11.4 item 2. */
-	DoC_Delay(docptr, 4);
-
-	if (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B))
-		/* Call the out-of-line routine to wait */
-		ret = _DoC_WaitReady(docptr);
-
-	/* issue 2 read from NOP register after reading from CDSNControl register
-	   see Software Requirement 11.4 item 2. */
-	DoC_Delay(docptr, 2);
-
-	return ret;
-}
-
-/* DoC_Command: Send a flash command to the flash chip through the CDSN IO register
-   with the internal pipeline. Each of 4 delay cycles (read from the NOP register) is
-   required after writing to CDSN Control register, see Software Requirement 11.4 item 3. */
-
-static void DoC_Command(void __iomem * docptr, unsigned char command,
-			       unsigned char xtraflags)
-{
-	/* Assert the CLE (Command Latch Enable) line to the flash chip */
-	WriteDOC(xtraflags | CDSN_CTRL_CLE | CDSN_CTRL_CE, docptr, CDSNControl);
-	DoC_Delay(docptr, 4);
-
-	/* Send the command */
-	WriteDOC(command, docptr, Mil_CDSN_IO);
-	WriteDOC(0x00, docptr, WritePipeTerm);
-
-	/* Lower the CLE line */
-	WriteDOC(xtraflags | CDSN_CTRL_CE, docptr, CDSNControl);
-	DoC_Delay(docptr, 4);
-}
-
-/* DoC_Address: Set the current address for the flash chip through the CDSN IO register
-   with the internal pipeline. Each of 4 delay cycles (read from the NOP register) is
-   required after writing to CDSN Control register, see Software Requirement 11.4 item 3. */
-
-static inline void DoC_Address(void __iomem * docptr, int numbytes, unsigned long ofs,
-			       unsigned char xtraflags1, unsigned char xtraflags2)
-{
-	/* Assert the ALE (Address Latch Enable) line to the flash chip */
-	WriteDOC(xtraflags1 | CDSN_CTRL_ALE | CDSN_CTRL_CE, docptr, CDSNControl);
-	DoC_Delay(docptr, 4);
-
-	/* Send the address */
-	switch (numbytes)
-	    {
-	    case 1:
-		    /* Send single byte, bits 0-7. */
-		    WriteDOC(ofs & 0xff, docptr, Mil_CDSN_IO);
-		    WriteDOC(0x00, docptr, WritePipeTerm);
-		    break;
-	    case 2:
-		    /* Send bits 9-16 followed by 17-23 */
-		    WriteDOC((ofs >> 9)  & 0xff, docptr, Mil_CDSN_IO);
-		    WriteDOC((ofs >> 17) & 0xff, docptr, Mil_CDSN_IO);
-		    WriteDOC(0x00, docptr, WritePipeTerm);
-		break;
-	    case 3:
-		    /* Send 0-7, 9-16, then 17-23 */
-		    WriteDOC(ofs & 0xff, docptr, Mil_CDSN_IO);
-		    WriteDOC((ofs >> 9)  & 0xff, docptr, Mil_CDSN_IO);
-		    WriteDOC((ofs >> 17) & 0xff, docptr, Mil_CDSN_IO);
-		    WriteDOC(0x00, docptr, WritePipeTerm);
-		break;
-	    default:
-		return;
-	    }
-
-	/* Lower the ALE line */
-	WriteDOC(xtraflags1 | xtraflags2 | CDSN_CTRL_CE, docptr, CDSNControl);
-	DoC_Delay(docptr, 4);
-}
-
-/* DoC_SelectChip: Select a given flash chip within the current floor */
-static int DoC_SelectChip(void __iomem * docptr, int chip)
-{
-	/* Select the individual flash chip requested */
-	WriteDOC(chip, docptr, CDSNDeviceSelect);
-	DoC_Delay(docptr, 4);
-
-	/* Wait for it to be ready */
-	return DoC_WaitReady(docptr);
-}
-
-/* DoC_SelectFloor: Select a given floor (bank of flash chips) */
-static int DoC_SelectFloor(void __iomem * docptr, int floor)
-{
-	/* Select the floor (bank) of chips required */
-	WriteDOC(floor, docptr, FloorSelect);
-
-	/* Wait for the chip to be ready */
-	return DoC_WaitReady(docptr);
-}
-
-/* DoC_IdentChip: Identify a given NAND chip given {floor,chip} */
-static int DoC_IdentChip(struct DiskOnChip *doc, int floor, int chip)
-{
-	int mfr, id, i, j;
-	volatile char dummy;
-
-	/* Page in the required floor/chip
-	   FIXME: is this supported by Millennium ?? */
-	DoC_SelectFloor(doc->virtadr, floor);
-	DoC_SelectChip(doc->virtadr, chip);
-
-	/* Reset the chip, see Software Requirement 11.4 item 1. */
-	DoC_Command(doc->virtadr, NAND_CMD_RESET, CDSN_CTRL_WP);
-	DoC_WaitReady(doc->virtadr);
-
-	/* Read the NAND chip ID: 1. Send ReadID command */
-	DoC_Command(doc->virtadr, NAND_CMD_READID, CDSN_CTRL_WP);
-
-	/* Read the NAND chip ID: 2. Send address byte zero */
-	DoC_Address(doc->virtadr, 1, 0x00, CDSN_CTRL_WP, 0x00);
-
-	/* Read the manufacturer and device id codes of the flash device through
-	   CDSN IO register see Software Requirement 11.4 item 5.*/
-	dummy = ReadDOC(doc->virtadr, ReadPipeInit);
-	DoC_Delay(doc->virtadr, 2);
-	mfr = ReadDOC(doc->virtadr, Mil_CDSN_IO);
-
-	DoC_Delay(doc->virtadr, 2);
-	id  = ReadDOC(doc->virtadr, Mil_CDSN_IO);
-	dummy = ReadDOC(doc->virtadr, LastDataRead);
-
-	/* No response - return failure */
-	if (mfr == 0xff || mfr == 0)
-		return 0;
-
-	/* FIXME: to deal with multi-flash on multi-Millennium case more carefully */
-	for (i = 0; nand_flash_ids[i].name != NULL; i++) {
-		if ( id == nand_flash_ids[i].id) {
-			/* Try to identify manufacturer */
-			for (j = 0; nand_manuf_ids[j].id != 0x0; j++) {
-				if (nand_manuf_ids[j].id == mfr)
-					break;
-			}
-			printk(KERN_INFO "Flash chip found: Manufacturer ID: %2.2X, "
-			       "Chip ID: %2.2X (%s:%s)\n",
-			       mfr, id, nand_manuf_ids[j].name, nand_flash_ids[i].name);
-			doc->mfr = mfr;
-			doc->id = id;
-			doc->chipshift = ffs((nand_flash_ids[i].chipsize << 20)) - 1;
-			break;
-		}
-	}
-
-	if (nand_flash_ids[i].name == NULL)
-		return 0;
-	else
-		return 1;
-}
-
-/* DoC_ScanChips: Find all NAND chips present in a DiskOnChip, and identify them */
-static void DoC_ScanChips(struct DiskOnChip *this)
-{
-	int floor, chip;
-	int numchips[MAX_FLOORS_MIL];
-	int ret;
-
-	this->numchips = 0;
-	this->mfr = 0;
-	this->id = 0;
-
-	/* For each floor, find the number of valid chips it contains */
-	for (floor = 0,ret = 1; floor < MAX_FLOORS_MIL; floor++) {
-		numchips[floor] = 0;
-		for (chip = 0; chip < MAX_CHIPS_MIL && ret != 0; chip++) {
-			ret = DoC_IdentChip(this, floor, chip);
-			if (ret) {
-				numchips[floor]++;
-				this->numchips++;
-			}
-		}
-	}
-	/* If there are none at all that we recognise, bail */
-	if (!this->numchips) {
-		printk("No flash chips recognised.\n");
-		return;
-	}
-
-	/* Allocate an array to hold the information for each chip */
-	this->chips = kmalloc(sizeof(struct Nand) * this->numchips, GFP_KERNEL);
-	if (!this->chips){
-		printk("No memory for allocating chip info structures\n");
-		return;
-	}
-
-	/* Fill out the chip array with {floor, chipno} for each
-	 * detected chip in the device. */
-	for (floor = 0, ret = 0; floor < MAX_FLOORS_MIL; floor++) {
-		for (chip = 0 ; chip < numchips[floor] ; chip++) {
-			this->chips[ret].floor = floor;
-			this->chips[ret].chip = chip;
-			this->chips[ret].curadr = 0;
-			this->chips[ret].curmode = 0x50;
-			ret++;
-		}
-	}
-
-	/* Calculate and print the total size of the device */
-	this->totlen = this->numchips * (1 << this->chipshift);
-	printk(KERN_INFO "%d flash chips found. Total DiskOnChip size: %ld MiB\n",
-	       this->numchips ,this->totlen >> 20);
-}
-
-static int DoCMil_is_alias(struct DiskOnChip *doc1, struct DiskOnChip *doc2)
-{
-	int tmp1, tmp2, retval;
-
-	if (doc1->physadr == doc2->physadr)
-		return 1;
-
-	/* Use the alias resolution register which was set aside for this
-	 * purpose. If it's value is the same on both chips, they might
-	 * be the same chip, and we write to one and check for a change in
-	 * the other. It's unclear if this register is usuable in the
-	 * DoC 2000 (it's in the Millenium docs), but it seems to work. */
-	tmp1 = ReadDOC(doc1->virtadr, AliasResolution);
-	tmp2 = ReadDOC(doc2->virtadr, AliasResolution);
-	if (tmp1 != tmp2)
-		return 0;
-
-	WriteDOC((tmp1+1) % 0xff, doc1->virtadr, AliasResolution);
-	tmp2 = ReadDOC(doc2->virtadr, AliasResolution);
-	if (tmp2 == (tmp1+1) % 0xff)
-		retval = 1;
-	else
-		retval = 0;
-
-	/* Restore register contents.  May not be necessary, but do it just to
-	 * be safe. */
-	WriteDOC(tmp1, doc1->virtadr, AliasResolution);
-
-	return retval;
-}
-
-/* This routine is found from the docprobe code by symbol_get(),
- * which will bump the use count of this module. */
-void DoCMil_init(struct mtd_info *mtd)
-{
-	struct DiskOnChip *this = mtd->priv;
-	struct DiskOnChip *old = NULL;
-
-	/* We must avoid being called twice for the same device. */
-	if (docmillist)
-		old = docmillist->priv;
-
-	while (old) {
-		if (DoCMil_is_alias(this, old)) {
-			printk(KERN_NOTICE "Ignoring DiskOnChip Millennium at "
-			       "0x%lX - already configured\n", this->physadr);
-			iounmap(this->virtadr);
-			kfree(mtd);
-			return;
-		}
-		if (old->nextdoc)
-			old = old->nextdoc->priv;
-		else
-			old = NULL;
-	}
-
-	mtd->name = "DiskOnChip Millennium";
-	printk(KERN_NOTICE "DiskOnChip Millennium found at address 0x%lX\n",
-	       this->physadr);
-
-	mtd->type = MTD_NANDFLASH;
-	mtd->flags = MTD_CAP_NANDFLASH;
-	mtd->size = 0;
-
-	/* FIXME: erase size is not always 8KiB */
-	mtd->erasesize = 0x2000;
-
-	mtd->writesize = 512;
-	mtd->oobsize = 16;
-	mtd->owner = THIS_MODULE;
-	mtd->erase = doc_erase;
-	mtd->point = NULL;
-	mtd->unpoint = NULL;
-	mtd->read = doc_read;
-	mtd->write = doc_write;
-	mtd->read_oob = doc_read_oob;
-	mtd->write_oob = doc_write_oob;
-	mtd->sync = NULL;
-
-	this->totlen = 0;
-	this->numchips = 0;
-	this->curfloor = -1;
-	this->curchip = -1;
-
-	/* Ident all the chips present. */
-	DoC_ScanChips(this);
-
-	if (!this->totlen) {
-		kfree(mtd);
-		iounmap(this->virtadr);
-	} else {
-		this->nextdoc = docmillist;
-		docmillist = mtd;
-		mtd->size  = this->totlen;
-		add_mtd_device(mtd);
-		return;
-	}
-}
-EXPORT_SYMBOL_GPL(DoCMil_init);
-
-static int doc_read (struct mtd_info *mtd, loff_t from, size_t len,
-		     size_t *retlen, u_char *buf)
-{
-	int i, ret;
-	volatile char dummy;
-	unsigned char syndrome[6], eccbuf[6];
-	struct DiskOnChip *this = mtd->priv;
-	void __iomem *docptr = this->virtadr;
-	struct Nand *mychip = &this->chips[from >> (this->chipshift)];
-
-	/* Don't allow read past end of device */
-	if (from >= this->totlen)
-		return -EINVAL;
-
-	/* Don't allow a single read to cross a 512-byte block boundary */
-	if (from + len > ((from | 0x1ff) + 1))
-		len = ((from | 0x1ff) + 1) - from;
-
-	/* Find the chip which is to be used and select it */
-	if (this->curfloor != mychip->floor) {
-		DoC_SelectFloor(docptr, mychip->floor);
-		DoC_SelectChip(docptr, mychip->chip);
-	} else if (this->curchip != mychip->chip) {
-		DoC_SelectChip(docptr, mychip->chip);
-	}
-	this->curfloor = mychip->floor;
-	this->curchip = mychip->chip;
-
-	/* issue the Read0 or Read1 command depend on which half of the page
-	   we are accessing. Polling the Flash Ready bit after issue 3 bytes
-	   address in Sequence Read Mode, see Software Requirement 11.4 item 1.*/
-	DoC_Command(docptr, (from >> 8) & 1, CDSN_CTRL_WP);
-	DoC_Address(docptr, 3, from, CDSN_CTRL_WP, 0x00);
-	DoC_WaitReady(docptr);
-
-	/* init the ECC engine, see Reed-Solomon EDC/ECC 11.1 .*/
-	WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
-	WriteDOC (DOC_ECC_EN, docptr, ECCConf);
-
-	/* Read the data via the internal pipeline through CDSN IO register,
-	   see Pipelined Read Operations 11.3 */
-	dummy = ReadDOC(docptr, ReadPipeInit);
-#ifndef USE_MEMCPY
-	for (i = 0; i < len-1; i++) {
-		/* N.B. you have to increase the source address in this way or the
-		   ECC logic will not work properly */
-		buf[i] = ReadDOC(docptr, Mil_CDSN_IO + (i & 0xff));
-	}
-#else
-	memcpy_fromio(buf, docptr + DoC_Mil_CDSN_IO, len - 1);
-#endif
-	buf[len - 1] = ReadDOC(docptr, LastDataRead);
-
-	/* Let the caller know we completed it */
-	*retlen = len;
-        ret = 0;
-
-	/* Read the ECC data from Spare Data Area,
-	   see Reed-Solomon EDC/ECC 11.1 */
-	dummy = ReadDOC(docptr, ReadPipeInit);
-#ifndef USE_MEMCPY
-	for (i = 0; i < 5; i++) {
-		/* N.B. you have to increase the source address in this way or the
-		   ECC logic will not work properly */
-		eccbuf[i] = ReadDOC(docptr, Mil_CDSN_IO + i);
-	}
-#else
-	memcpy_fromio(eccbuf, docptr + DoC_Mil_CDSN_IO, 5);
-#endif
-	eccbuf[5] = ReadDOC(docptr, LastDataRead);
-
-	/* Flush the pipeline */
-	dummy = ReadDOC(docptr, ECCConf);
-	dummy = ReadDOC(docptr, ECCConf);
-
-	/* Check the ECC Status */
-	if (ReadDOC(docptr, ECCConf) & 0x80) {
-		int nb_errors;
-		/* There was an ECC error */
-#ifdef ECC_DEBUG
-		printk("DiskOnChip ECC Error: Read at %lx\n", (long)from);
-#endif
-		/* Read the ECC syndrom through the DiskOnChip ECC logic.
-		   These syndrome will be all ZERO when there is no error */
-		for (i = 0; i < 6; i++) {
-			syndrome[i] = ReadDOC(docptr, ECCSyndrome0 + i);
-		}
-		nb_errors = doc_decode_ecc(buf, syndrome);
-#ifdef ECC_DEBUG
-		printk("ECC Errors corrected: %x\n", nb_errors);
-#endif
-		if (nb_errors < 0) {
-			/* We return error, but have actually done the read. Not that
-			   this can be told to user-space, via sys_read(), but at least
-			   MTD-aware stuff can know about it by checking *retlen */
-			ret = -EIO;
-		}
-	}
-
-#ifdef PSYCHO_DEBUG
-	printk("ECC DATA at %lx: %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
-	       (long)from, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3],
-	       eccbuf[4], eccbuf[5]);
-#endif
-
-	/* disable the ECC engine */
-	WriteDOC(DOC_ECC_DIS, docptr , ECCConf);
-
-	return ret;
-}
-
-static int doc_write (struct mtd_info *mtd, loff_t to, size_t len,
-		      size_t *retlen, const u_char *buf)
-{
-	int i,ret = 0;
-	char eccbuf[6];
-	volatile char dummy;
-	struct DiskOnChip *this = mtd->priv;
-	void __iomem *docptr = this->virtadr;
-	struct Nand *mychip = &this->chips[to >> (this->chipshift)];
-
-	/* Don't allow write past end of device */
-	if (to >= this->totlen)
-		return -EINVAL;
-
-#if 0
-	/* Don't allow a single write to cross a 512-byte block boundary */
-	if (to + len > ( (to | 0x1ff) + 1))
-		len = ((to | 0x1ff) + 1) - to;
-#else
-	/* Don't allow writes which aren't exactly one block */
-	if (to & 0x1ff || len != 0x200)
-		return -EINVAL;
-#endif
-
-	/* Find the chip which is to be used and select it */
-	if (this->curfloor != mychip->floor) {
-		DoC_SelectFloor(docptr, mychip->floor);
-		DoC_SelectChip(docptr, mychip->chip);
-	} else if (this->curchip != mychip->chip) {
-		DoC_SelectChip(docptr, mychip->chip);
-	}
-	this->curfloor = mychip->floor;
-	this->curchip = mychip->chip;
-
-	/* Reset the chip, see Software Requirement 11.4 item 1. */
-	DoC_Command(docptr, NAND_CMD_RESET, 0x00);
-	DoC_WaitReady(docptr);
-	/* Set device to main plane of flash */
-	DoC_Command(docptr, NAND_CMD_READ0, 0x00);
-
-	/* issue the Serial Data In command to initial the Page Program process */
-	DoC_Command(docptr, NAND_CMD_SEQIN, 0x00);
-	DoC_Address(docptr, 3, to, 0x00, 0x00);
-	DoC_WaitReady(docptr);
-
-	/* init the ECC engine, see Reed-Solomon EDC/ECC 11.1 .*/
-	WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
-	WriteDOC (DOC_ECC_EN | DOC_ECC_RW, docptr, ECCConf);
-
-	/* Write the data via the internal pipeline through CDSN IO register,
-	   see Pipelined Write Operations 11.2 */
-#ifndef USE_MEMCPY
-	for (i = 0; i < len; i++) {
-		/* N.B. you have to increase the source address in this way or the
-		   ECC logic will not work properly */
-		WriteDOC(buf[i], docptr, Mil_CDSN_IO + i);
-	}
-#else
-	memcpy_toio(docptr + DoC_Mil_CDSN_IO, buf, len);
-#endif
-	WriteDOC(0x00, docptr, WritePipeTerm);
-
-	/* Write ECC data to flash, the ECC info is generated by the DiskOnChip ECC logic
-	   see Reed-Solomon EDC/ECC 11.1 */
-	WriteDOC(0, docptr, NOP);
-	WriteDOC(0, docptr, NOP);
-	WriteDOC(0, docptr, NOP);
-
-	/* Read the ECC data through the DiskOnChip ECC logic */
-	for (i = 0; i < 6; i++) {
-		eccbuf[i] = ReadDOC(docptr, ECCSyndrome0 + i);
-	}
-
-	/* ignore the ECC engine */
-	WriteDOC(DOC_ECC_DIS, docptr , ECCConf);
-
-#ifndef USE_MEMCPY
-	/* Write the ECC data to flash */
-	for (i = 0; i < 6; i++) {
-		/* N.B. you have to increase the source address in this way or the
-		   ECC logic will not work properly */
-		WriteDOC(eccbuf[i], docptr, Mil_CDSN_IO + i);
-	}
-#else
-	memcpy_toio(docptr + DoC_Mil_CDSN_IO, eccbuf, 6);
-#endif
-
-	/* write the block status BLOCK_USED (0x5555) at the end of ECC data
-	   FIXME: this is only a hack for programming the IPL area for LinuxBIOS
-	   and should be replace with proper codes in user space utilities */
-	WriteDOC(0x55, docptr, Mil_CDSN_IO);
-	WriteDOC(0x55, docptr, Mil_CDSN_IO + 1);
-
-	WriteDOC(0x00, docptr, WritePipeTerm);
-
-#ifdef PSYCHO_DEBUG
-	printk("OOB data at %lx is %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
-	       (long) to, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3],
-	       eccbuf[4], eccbuf[5]);
-#endif
-
-	/* Commit the Page Program command and wait for ready
-	   see Software Requirement 11.4 item 1.*/
-	DoC_Command(docptr, NAND_CMD_PAGEPROG, 0x00);
-	DoC_WaitReady(docptr);
-
-	/* Read the status of the flash device through CDSN IO register
-	   see Software Requirement 11.4 item 5.*/
-	DoC_Command(docptr, NAND_CMD_STATUS, CDSN_CTRL_WP);
-	dummy = ReadDOC(docptr, ReadPipeInit);
-	DoC_Delay(docptr, 2);
-	if (ReadDOC(docptr, Mil_CDSN_IO) & 1) {
-		printk("Error programming flash\n");
-		/* Error in programming
-		   FIXME: implement Bad Block Replacement (in nftl.c ??) */
-		*retlen = 0;
-		ret = -EIO;
-	}
-	dummy = ReadDOC(docptr, LastDataRead);
-
-	/* Let the caller know we completed it */
-	*retlen = len;
-
-	return ret;
-}
-
-static int doc_read_oob(struct mtd_info *mtd, loff_t ofs,
-			struct mtd_oob_ops *ops)
-{
-#ifndef USE_MEMCPY
-	int i;
-#endif
-	volatile char dummy;
-	struct DiskOnChip *this = mtd->priv;
-	void __iomem *docptr = this->virtadr;
-	struct Nand *mychip = &this->chips[ofs >> this->chipshift];
-	uint8_t *buf = ops->oobbuf;
-	size_t len = ops->len;
-
-	BUG_ON(ops->mode != MTD_OOB_PLACE);
-
-	ofs += ops->ooboffs;
-
-	/* Find the chip which is to be used and select it */
-	if (this->curfloor != mychip->floor) {
-		DoC_SelectFloor(docptr, mychip->floor);
-		DoC_SelectChip(docptr, mychip->chip);
-	} else if (this->curchip != mychip->chip) {
-		DoC_SelectChip(docptr, mychip->chip);
-	}
-	this->curfloor = mychip->floor;
-	this->curchip = mychip->chip;
-
-	/* disable the ECC engine */
-	WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
-	WriteDOC (DOC_ECC_DIS, docptr, ECCConf);
-
-	/* issue the Read2 command to set the pointer to the Spare Data Area.
-	   Polling the Flash Ready bit after issue 3 bytes address in
-	   Sequence Read Mode, see Software Requirement 11.4 item 1.*/
-	DoC_Command(docptr, NAND_CMD_READOOB, CDSN_CTRL_WP);
-	DoC_Address(docptr, 3, ofs, CDSN_CTRL_WP, 0x00);
-	DoC_WaitReady(docptr);
-
-	/* Read the data out via the internal pipeline through CDSN IO register,
-	   see Pipelined Read Operations 11.3 */
-	dummy = ReadDOC(docptr, ReadPipeInit);
-#ifndef USE_MEMCPY
-	for (i = 0; i < len-1; i++) {
-		/* N.B. you have to increase the source address in this way or the
-		   ECC logic will not work properly */
-		buf[i] = ReadDOC(docptr, Mil_CDSN_IO + i);
-	}
-#else
-	memcpy_fromio(buf, docptr + DoC_Mil_CDSN_IO, len - 1);
-#endif
-	buf[len - 1] = ReadDOC(docptr, LastDataRead);
-
-	ops->retlen = len;
-
-	return 0;
-}
-
-static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
-			 struct mtd_oob_ops *ops)
-{
-#ifndef USE_MEMCPY
-	int i;
-#endif
-	volatile char dummy;
-	int ret = 0;
-	struct DiskOnChip *this = mtd->priv;
-	void __iomem *docptr = this->virtadr;
-	struct Nand *mychip = &this->chips[ofs >> this->chipshift];
-	uint8_t *buf = ops->oobbuf;
-	size_t len = ops->len;
-
-	BUG_ON(ops->mode != MTD_OOB_PLACE);
-
-	ofs += ops->ooboffs;
-
-	/* Find the chip which is to be used and select it */
-	if (this->curfloor != mychip->floor) {
-		DoC_SelectFloor(docptr, mychip->floor);
-		DoC_SelectChip(docptr, mychip->chip);
-	} else if (this->curchip != mychip->chip) {
-		DoC_SelectChip(docptr, mychip->chip);
-	}
-	this->curfloor = mychip->floor;
-	this->curchip = mychip->chip;
-
-	/* disable the ECC engine */
-	WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
-	WriteDOC (DOC_ECC_DIS, docptr, ECCConf);
-
-	/* Reset the chip, see Software Requirement 11.4 item 1. */
-	DoC_Command(docptr, NAND_CMD_RESET, CDSN_CTRL_WP);
-	DoC_WaitReady(docptr);
-	/* issue the Read2 command to set the pointer to the Spare Data Area. */
-	DoC_Command(docptr, NAND_CMD_READOOB, CDSN_CTRL_WP);
-
-	/* issue the Serial Data In command to initial the Page Program process */
-	DoC_Command(docptr, NAND_CMD_SEQIN, 0x00);
-	DoC_Address(docptr, 3, ofs, 0x00, 0x00);
-
-	/* Write the data via the internal pipeline through CDSN IO register,
-	   see Pipelined Write Operations 11.2 */
-#ifndef USE_MEMCPY
-	for (i = 0; i < len; i++) {
-		/* N.B. you have to increase the source address in this way or the
-		   ECC logic will not work properly */
-		WriteDOC(buf[i], docptr, Mil_CDSN_IO + i);
-	}
-#else
-	memcpy_toio(docptr + DoC_Mil_CDSN_IO, buf, len);
-#endif
-	WriteDOC(0x00, docptr, WritePipeTerm);
-
-	/* Commit the Page Program command and wait for ready
-	   see Software Requirement 11.4 item 1.*/
-	DoC_Command(docptr, NAND_CMD_PAGEPROG, 0x00);
-	DoC_WaitReady(docptr);
-
-	/* Read the status of the flash device through CDSN IO register
-	   see Software Requirement 11.4 item 5.*/
-	DoC_Command(docptr, NAND_CMD_STATUS, 0x00);
-	dummy = ReadDOC(docptr, ReadPipeInit);
-	DoC_Delay(docptr, 2);
-	if (ReadDOC(docptr, Mil_CDSN_IO) & 1) {
-		printk("Error programming oob data\n");
-		/* FIXME: implement Bad Block Replacement (in nftl.c ??) */
-		ops->retlen = 0;
-		ret = -EIO;
-	}
-	dummy = ReadDOC(docptr, LastDataRead);
-
-	ops->retlen = len;
-
-	return ret;
-}
-
-int doc_erase (struct mtd_info *mtd, struct erase_info *instr)
-{
-	volatile char dummy;
-	struct DiskOnChip *this = mtd->priv;
-	__u32 ofs = instr->addr;
-	__u32 len = instr->len;
-	void __iomem *docptr = this->virtadr;
-	struct Nand *mychip = &this->chips[ofs >> this->chipshift];
-
-	if (len != mtd->erasesize)
-		printk(KERN_WARNING "Erase not right size (%x != %x)n",
-		       len, mtd->erasesize);
-
-	/* Find the chip which is to be used and select it */
-	if (this->curfloor != mychip->floor) {
-		DoC_SelectFloor(docptr, mychip->floor);
-		DoC_SelectChip(docptr, mychip->chip);
-	} else if (this->curchip != mychip->chip) {
-		DoC_SelectChip(docptr, mychip->chip);
-	}
-	this->curfloor = mychip->floor;
-	this->curchip = mychip->chip;
-
-	instr->state = MTD_ERASE_PENDING;
-
-	/* issue the Erase Setup command */
-	DoC_Command(docptr, NAND_CMD_ERASE1, 0x00);
-	DoC_Address(docptr, 2, ofs, 0x00, 0x00);
-
-	/* Commit the Erase Start command and wait for ready
-	   see Software Requirement 11.4 item 1.*/
-	DoC_Command(docptr, NAND_CMD_ERASE2, 0x00);
-	DoC_WaitReady(docptr);
-
-	instr->state = MTD_ERASING;
-
-	/* Read the status of the flash device through CDSN IO register
-	   see Software Requirement 11.4 item 5.
-	   FIXME: it seems that we are not wait long enough, some blocks are not
-	   erased fully */
-	DoC_Command(docptr, NAND_CMD_STATUS, CDSN_CTRL_WP);
-	dummy = ReadDOC(docptr, ReadPipeInit);
-	DoC_Delay(docptr, 2);
-	if (ReadDOC(docptr, Mil_CDSN_IO) & 1) {
-		printk("Error Erasing at 0x%x\n", ofs);
-		/* There was an error
-		   FIXME: implement Bad Block Replacement (in nftl.c ??) */
-		instr->state = MTD_ERASE_FAILED;
-	} else
-		instr->state = MTD_ERASE_DONE;
-	dummy = ReadDOC(docptr, LastDataRead);
-
-	mtd_erase_callback(instr);
-
-	return 0;
-}
-
-/****************************************************************************
- *
- * Module stuff
- *
- ****************************************************************************/
-
-static void __exit cleanup_doc2001(void)
-{
-	struct mtd_info *mtd;
-	struct DiskOnChip *this;
-
-	while ((mtd=docmillist)) {
-		this = mtd->priv;
-		docmillist = this->nextdoc;
-
-		del_mtd_device(mtd);
-
-		iounmap(this->virtadr);
-		kfree(this->chips);
-		kfree(mtd);
-	}
-}
-
-module_exit(cleanup_doc2001);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org> et al.");
-MODULE_DESCRIPTION("Alternative driver for DiskOnChip Millennium");
diff --git a/drivers/mtd/devices/doc2001plus.c b/drivers/mtd/devices/doc2001plus.c
deleted file mode 100644
index 719b2915dc3..00000000000
--- a/drivers/mtd/devices/doc2001plus.c
+++ /dev/null
@@ -1,1106 +0,0 @@
-/*
- * Linux driver for Disk-On-Chip Millennium Plus
- *
- * (c) 2002-2003 Greg Ungerer <gerg@snapgear.com>
- * (c) 2002-2003 SnapGear Inc
- * (c) 1999 Machine Vision Holdings, Inc.
- * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
- *
- * Released under GPL
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/errno.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/bitops.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/doc2000.h>
-
-/* #define ECC_DEBUG */
-
-/* I have no idea why some DoC chips can not use memcop_form|to_io().
- * This may be due to the different revisions of the ASIC controller built-in or
- * simplily a QA/Bug issue. Who knows ?? If you have trouble, please uncomment
- * this:*/
-#undef USE_MEMCPY
-
-static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
-		size_t *retlen, u_char *buf);
-static int doc_write(struct mtd_info *mtd, loff_t to, size_t len,
-		size_t *retlen, const u_char *buf);
-static int doc_read_oob(struct mtd_info *mtd, loff_t ofs,
-			struct mtd_oob_ops *ops);
-static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
-			 struct mtd_oob_ops *ops);
-static int doc_erase (struct mtd_info *mtd, struct erase_info *instr);
-
-static struct mtd_info *docmilpluslist = NULL;
-
-
-/* Perform the required delay cycles by writing to the NOP register */
-static void DoC_Delay(void __iomem * docptr, int cycles)
-{
-	int i;
-
-	for (i = 0; (i < cycles); i++)
-		WriteDOC(0, docptr, Mplus_NOP);
-}
-
-#define	CDSN_CTRL_FR_B_MASK	(CDSN_CTRL_FR_B0 | CDSN_CTRL_FR_B1)
-
-/* DOC_WaitReady: Wait for RDY line to be asserted by the flash chip */
-static int _DoC_WaitReady(void __iomem * docptr)
-{
-	unsigned int c = 0xffff;
-
-	DEBUG(MTD_DEBUG_LEVEL3,
-	      "_DoC_WaitReady called for out-of-line wait\n");
-
-	/* Out-of-line routine to wait for chip response */
-	while (((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK) && --c)
-		;
-
-	if (c == 0)
-		DEBUG(MTD_DEBUG_LEVEL2, "_DoC_WaitReady timed out.\n");
-
-	return (c == 0);
-}
-
-static inline int DoC_WaitReady(void __iomem * docptr)
-{
-	/* This is inline, to optimise the common case, where it's ready instantly */
-	int ret = 0;
-
-	/* read form NOP register should be issued prior to the read from CDSNControl
-	   see Software Requirement 11.4 item 2. */
-	DoC_Delay(docptr, 4);
-
-	if ((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK)
-		/* Call the out-of-line routine to wait */
-		ret = _DoC_WaitReady(docptr);
-
-	return ret;
-}
-
-/* For some reason the Millennium Plus seems to occassionally put itself
- * into reset mode. For me this happens randomly, with no pattern that I
- * can detect. M-systems suggest always check this on any block level
- * operation and setting to normal mode if in reset mode.
- */
-static inline void DoC_CheckASIC(void __iomem * docptr)
-{
-	/* Make sure the DoC is in normal mode */
-	if ((ReadDOC(docptr, Mplus_DOCControl) & DOC_MODE_NORMAL) == 0) {
-		WriteDOC((DOC_MODE_NORMAL | DOC_MODE_MDWREN), docptr, Mplus_DOCControl);
-		WriteDOC(~(DOC_MODE_NORMAL | DOC_MODE_MDWREN), docptr, Mplus_CtrlConfirm);
-	}
-}
-
-/* DoC_Command: Send a flash command to the flash chip through the Flash
- * command register. Need 2 Write Pipeline Terminates to complete send.
- */
-static void DoC_Command(void __iomem * docptr, unsigned char command,
-			       unsigned char xtraflags)
-{
-	WriteDOC(command, docptr, Mplus_FlashCmd);
-	WriteDOC(command, docptr, Mplus_WritePipeTerm);
-	WriteDOC(command, docptr, Mplus_WritePipeTerm);
-}
-
-/* DoC_Address: Set the current address for the flash chip through the Flash
- * Address register. Need 2 Write Pipeline Terminates to complete send.
- */
-static inline void DoC_Address(struct DiskOnChip *doc, int numbytes,
-			       unsigned long ofs, unsigned char xtraflags1,
-			       unsigned char xtraflags2)
-{
-	void __iomem * docptr = doc->virtadr;
-
-	/* Allow for possible Mill Plus internal flash interleaving */
-	ofs >>= doc->interleave;
-
-	switch (numbytes) {
-	case 1:
-		/* Send single byte, bits 0-7. */
-		WriteDOC(ofs & 0xff, docptr, Mplus_FlashAddress);
-		break;
-	case 2:
-		/* Send bits 9-16 followed by 17-23 */
-		WriteDOC((ofs >> 9)  & 0xff, docptr, Mplus_FlashAddress);
-		WriteDOC((ofs >> 17) & 0xff, docptr, Mplus_FlashAddress);
-		break;
-	case 3:
-		/* Send 0-7, 9-16, then 17-23 */
-		WriteDOC(ofs & 0xff, docptr, Mplus_FlashAddress);
-		WriteDOC((ofs >> 9)  & 0xff, docptr, Mplus_FlashAddress);
-		WriteDOC((ofs >> 17) & 0xff, docptr, Mplus_FlashAddress);
-		break;
-	default:
-		return;
-	}
-
-	WriteDOC(0x00, docptr, Mplus_WritePipeTerm);
-	WriteDOC(0x00, docptr, Mplus_WritePipeTerm);
-}
-
-/* DoC_SelectChip: Select a given flash chip within the current floor */
-static int DoC_SelectChip(void __iomem * docptr, int chip)
-{
-	/* No choice for flash chip on Millennium Plus */
-	return 0;
-}
-
-/* DoC_SelectFloor: Select a given floor (bank of flash chips) */
-static int DoC_SelectFloor(void __iomem * docptr, int floor)
-{
-	WriteDOC((floor & 0x3), docptr, Mplus_DeviceSelect);
-	return 0;
-}
-
-/*
- * Translate the given offset into the appropriate command and offset.
- * This does the mapping using the 16bit interleave layout defined by
- * M-Systems, and looks like this for a sector pair:
- *  +-----------+-------+-------+-------+--------------+---------+-----------+
- *  | 0 --- 511 |512-517|518-519|520-521| 522 --- 1033 |1034-1039|1040 - 1055|
- *  +-----------+-------+-------+-------+--------------+---------+-----------+
- *  | Data 0    | ECC 0 |Flags0 |Flags1 | Data 1       |ECC 1    | OOB 1 + 2 |
- *  +-----------+-------+-------+-------+--------------+---------+-----------+
- */
-/* FIXME: This lives in INFTL not here. Other users of flash devices
-   may not want it */
-static unsigned int DoC_GetDataOffset(struct mtd_info *mtd, loff_t *from)
-{
-	struct DiskOnChip *this = mtd->priv;
-
-	if (this->interleave) {
-		unsigned int ofs = *from & 0x3ff;
-		unsigned int cmd;
-
-		if (ofs < 512) {
-			cmd = NAND_CMD_READ0;
-			ofs &= 0x1ff;
-		} else if (ofs < 1014) {
-			cmd = NAND_CMD_READ1;
-			ofs = (ofs & 0x1ff) + 10;
-		} else {
-			cmd = NAND_CMD_READOOB;
-			ofs = ofs - 1014;
-		}
-
-		*from = (*from & ~0x3ff) | ofs;
-		return cmd;
-	} else {
-		/* No interleave */
-		if ((*from) & 0x100)
-			return NAND_CMD_READ1;
-		return NAND_CMD_READ0;
-	}
-}
-
-static unsigned int DoC_GetECCOffset(struct mtd_info *mtd, loff_t *from)
-{
-	unsigned int ofs, cmd;
-
-	if (*from & 0x200) {
-		cmd = NAND_CMD_READOOB;
-		ofs = 10 + (*from & 0xf);
-	} else {
-		cmd = NAND_CMD_READ1;
-		ofs = (*from & 0xf);
-	}
-
-	*from = (*from & ~0x3ff) | ofs;
-	return cmd;
-}
-
-static unsigned int DoC_GetFlagsOffset(struct mtd_info *mtd, loff_t *from)
-{
-	unsigned int ofs, cmd;
-
-	cmd = NAND_CMD_READ1;
-	ofs = (*from & 0x200) ? 8 : 6;
-	*from = (*from & ~0x3ff) | ofs;
-	return cmd;
-}
-
-static unsigned int DoC_GetHdrOffset(struct mtd_info *mtd, loff_t *from)
-{
-	unsigned int ofs, cmd;
-
-	cmd = NAND_CMD_READOOB;
-	ofs = (*from & 0x200) ? 24 : 16;
-	*from = (*from & ~0x3ff) | ofs;
-	return cmd;
-}
-
-static inline void MemReadDOC(void __iomem * docptr, unsigned char *buf, int len)
-{
-#ifndef USE_MEMCPY
-	int i;
-	for (i = 0; i < len; i++)
-		buf[i] = ReadDOC(docptr, Mil_CDSN_IO + i);
-#else
-	memcpy_fromio(buf, docptr + DoC_Mil_CDSN_IO, len);
-#endif
-}
-
-static inline void MemWriteDOC(void __iomem * docptr, unsigned char *buf, int len)
-{
-#ifndef USE_MEMCPY
-	int i;
-	for (i = 0; i < len; i++)
-		WriteDOC(buf[i], docptr, Mil_CDSN_IO + i);
-#else
-	memcpy_toio(docptr + DoC_Mil_CDSN_IO, buf, len);
-#endif
-}
-
-/* DoC_IdentChip: Identify a given NAND chip given {floor,chip} */
-static int DoC_IdentChip(struct DiskOnChip *doc, int floor, int chip)
-{
-	int mfr, id, i, j;
-	volatile char dummy;
-	void __iomem * docptr = doc->virtadr;
-
-	/* Page in the required floor/chip */
-	DoC_SelectFloor(docptr, floor);
-	DoC_SelectChip(docptr, chip);
-
-	/* Millennium Plus bus cycle sequence as per figure 2, section 2.4 */
-	WriteDOC((DOC_FLASH_CE | DOC_FLASH_WP), docptr, Mplus_FlashSelect);
-
-	/* Reset the chip, see Software Requirement 11.4 item 1. */
-	DoC_Command(docptr, NAND_CMD_RESET, 0);
-	DoC_WaitReady(docptr);
-
-	/* Read the NAND chip ID: 1. Send ReadID command */
-	DoC_Command(docptr, NAND_CMD_READID, 0);
-
-	/* Read the NAND chip ID: 2. Send address byte zero */
-	DoC_Address(doc, 1, 0x00, 0, 0x00);
-
-	WriteDOC(0, docptr, Mplus_FlashControl);
-	DoC_WaitReady(docptr);
-
-	/* Read the manufacturer and device id codes of the flash device through
-	   CDSN IO register see Software Requirement 11.4 item 5.*/
-	dummy = ReadDOC(docptr, Mplus_ReadPipeInit);
-	dummy = ReadDOC(docptr, Mplus_ReadPipeInit);
-
-	mfr = ReadDOC(docptr, Mil_CDSN_IO);
-	if (doc->interleave)
-		dummy = ReadDOC(docptr, Mil_CDSN_IO); /* 2 way interleave */
-
-	id  = ReadDOC(docptr, Mil_CDSN_IO);
-	if (doc->interleave)
-		dummy = ReadDOC(docptr, Mil_CDSN_IO); /* 2 way interleave */
-
-	dummy = ReadDOC(docptr, Mplus_LastDataRead);
-	dummy = ReadDOC(docptr, Mplus_LastDataRead);
-
-	/* Disable flash internally */
-	WriteDOC(0, docptr, Mplus_FlashSelect);
-
-	/* No response - return failure */
-	if (mfr == 0xff || mfr == 0)
-		return 0;
-
-	for (i = 0; nand_flash_ids[i].name != NULL; i++) {
-		if (id == nand_flash_ids[i].id) {
-			/* Try to identify manufacturer */
-			for (j = 0; nand_manuf_ids[j].id != 0x0; j++) {
-				if (nand_manuf_ids[j].id == mfr)
-					break;
-			}
-			printk(KERN_INFO "Flash chip found: Manufacturer ID: %2.2X, "
-			       "Chip ID: %2.2X (%s:%s)\n", mfr, id,
-			       nand_manuf_ids[j].name, nand_flash_ids[i].name);
-			doc->mfr = mfr;
-			doc->id = id;
-			doc->chipshift = ffs((nand_flash_ids[i].chipsize << 20)) - 1;
-			doc->erasesize = nand_flash_ids[i].erasesize << doc->interleave;
-			break;
-		}
-	}
-
-	if (nand_flash_ids[i].name == NULL)
-		return 0;
-	return 1;
-}
-
-/* DoC_ScanChips: Find all NAND chips present in a DiskOnChip, and identify them */
-static void DoC_ScanChips(struct DiskOnChip *this)
-{
-	int floor, chip;
-	int numchips[MAX_FLOORS_MPLUS];
-	int ret;
-
-	this->numchips = 0;
-	this->mfr = 0;
-	this->id = 0;
-
-	/* Work out the intended interleave setting */
-	this->interleave = 0;
-	if (this->ChipID == DOC_ChipID_DocMilPlus32)
-		this->interleave = 1;
-
-	/* Check the ASIC agrees */
-	if ( (this->interleave << 2) !=
-	     (ReadDOC(this->virtadr, Mplus_Configuration) & 4)) {
-		u_char conf = ReadDOC(this->virtadr, Mplus_Configuration);
-		printk(KERN_NOTICE "Setting DiskOnChip Millennium Plus interleave to %s\n",
-		       this->interleave?"on (16-bit)":"off (8-bit)");
-		conf ^= 4;
-		WriteDOC(conf, this->virtadr, Mplus_Configuration);
-	}
-
-	/* For each floor, find the number of valid chips it contains */
-	for (floor = 0,ret = 1; floor < MAX_FLOORS_MPLUS; floor++) {
-		numchips[floor] = 0;
-		for (chip = 0; chip < MAX_CHIPS_MPLUS && ret != 0; chip++) {
-			ret = DoC_IdentChip(this, floor, chip);
-			if (ret) {
-				numchips[floor]++;
-				this->numchips++;
-			}
-		}
-	}
-	/* If there are none at all that we recognise, bail */
-	if (!this->numchips) {
-		printk("No flash chips recognised.\n");
-		return;
-	}
-
-	/* Allocate an array to hold the information for each chip */
-	this->chips = kmalloc(sizeof(struct Nand) * this->numchips, GFP_KERNEL);
-	if (!this->chips){
-		printk("MTD: No memory for allocating chip info structures\n");
-		return;
-	}
-
-	/* Fill out the chip array with {floor, chipno} for each
-	 * detected chip in the device. */
-	for (floor = 0, ret = 0; floor < MAX_FLOORS_MPLUS; floor++) {
-		for (chip = 0 ; chip < numchips[floor] ; chip++) {
-			this->chips[ret].floor = floor;
-			this->chips[ret].chip = chip;
-			this->chips[ret].curadr = 0;
-			this->chips[ret].curmode = 0x50;
-			ret++;
-		}
-	}
-
-	/* Calculate and print the total size of the device */
-	this->totlen = this->numchips * (1 << this->chipshift);
-	printk(KERN_INFO "%d flash chips found. Total DiskOnChip size: %ld MiB\n",
-	       this->numchips ,this->totlen >> 20);
-}
-
-static int DoCMilPlus_is_alias(struct DiskOnChip *doc1, struct DiskOnChip *doc2)
-{
-	int tmp1, tmp2, retval;
-
-	if (doc1->physadr == doc2->physadr)
-		return 1;
-
-	/* Use the alias resolution register which was set aside for this
-	 * purpose. If it's value is the same on both chips, they might
-	 * be the same chip, and we write to one and check for a change in
-	 * the other. It's unclear if this register is usuable in the
-	 * DoC 2000 (it's in the Millennium docs), but it seems to work. */
-	tmp1 = ReadDOC(doc1->virtadr, Mplus_AliasResolution);
-	tmp2 = ReadDOC(doc2->virtadr, Mplus_AliasResolution);
-	if (tmp1 != tmp2)
-		return 0;
-
-	WriteDOC((tmp1+1) % 0xff, doc1->virtadr, Mplus_AliasResolution);
-	tmp2 = ReadDOC(doc2->virtadr, Mplus_AliasResolution);
-	if (tmp2 == (tmp1+1) % 0xff)
-		retval = 1;
-	else
-		retval = 0;
-
-	/* Restore register contents.  May not be necessary, but do it just to
-	 * be safe. */
-	WriteDOC(tmp1, doc1->virtadr, Mplus_AliasResolution);
-
-	return retval;
-}
-
-/* This routine is found from the docprobe code by symbol_get(),
- * which will bump the use count of this module. */
-void DoCMilPlus_init(struct mtd_info *mtd)
-{
-	struct DiskOnChip *this = mtd->priv;
-	struct DiskOnChip *old = NULL;
-
-	/* We must avoid being called twice for the same device. */
-	if (docmilpluslist)
-		old = docmilpluslist->priv;
-
-	while (old) {
-		if (DoCMilPlus_is_alias(this, old)) {
-			printk(KERN_NOTICE "Ignoring DiskOnChip Millennium "
-				"Plus at 0x%lX - already configured\n",
-				this->physadr);
-			iounmap(this->virtadr);
-			kfree(mtd);
-			return;
-		}
-		if (old->nextdoc)
-			old = old->nextdoc->priv;
-		else
-			old = NULL;
-	}
-
-	mtd->name = "DiskOnChip Millennium Plus";
-	printk(KERN_NOTICE "DiskOnChip Millennium Plus found at "
-		"address 0x%lX\n", this->physadr);
-
-	mtd->type = MTD_NANDFLASH;
-	mtd->flags = MTD_CAP_NANDFLASH;
-	mtd->size = 0;
-
-	mtd->erasesize = 0;
-	mtd->writesize = 512;
-	mtd->oobsize = 16;
-	mtd->owner = THIS_MODULE;
-	mtd->erase = doc_erase;
-	mtd->point = NULL;
-	mtd->unpoint = NULL;
-	mtd->read = doc_read;
-	mtd->write = doc_write;
-	mtd->read_oob = doc_read_oob;
-	mtd->write_oob = doc_write_oob;
-	mtd->sync = NULL;
-
-	this->totlen = 0;
-	this->numchips = 0;
-	this->curfloor = -1;
-	this->curchip = -1;
-
-	/* Ident all the chips present. */
-	DoC_ScanChips(this);
-
-	if (!this->totlen) {
-		kfree(mtd);
-		iounmap(this->virtadr);
-	} else {
-		this->nextdoc = docmilpluslist;
-		docmilpluslist = mtd;
-		mtd->size  = this->totlen;
-		mtd->erasesize = this->erasesize;
-		add_mtd_device(mtd);
-		return;
-	}
-}
-EXPORT_SYMBOL_GPL(DoCMilPlus_init);
-
-#if 0
-static int doc_dumpblk(struct mtd_info *mtd, loff_t from)
-{
-	int i;
-	loff_t fofs;
-	struct DiskOnChip *this = mtd->priv;
-	void __iomem * docptr = this->virtadr;
-	struct Nand *mychip = &this->chips[from >> (this->chipshift)];
-	unsigned char *bp, buf[1056];
-	char c[32];
-
-	from &= ~0x3ff;
-
-	/* Don't allow read past end of device */
-	if (from >= this->totlen)
-		return -EINVAL;
-
-	DoC_CheckASIC(docptr);
-
-	/* Find the chip which is to be used and select it */
-	if (this->curfloor != mychip->floor) {
-		DoC_SelectFloor(docptr, mychip->floor);
-		DoC_SelectChip(docptr, mychip->chip);
-	} else if (this->curchip != mychip->chip) {
-		DoC_SelectChip(docptr, mychip->chip);
-	}
-	this->curfloor = mychip->floor;
-	this->curchip = mychip->chip;
-
-	/* Millennium Plus bus cycle sequence as per figure 2, section 2.4 */
-	WriteDOC((DOC_FLASH_CE | DOC_FLASH_WP), docptr, Mplus_FlashSelect);
-
-	/* Reset the chip, see Software Requirement 11.4 item 1. */
-	DoC_Command(docptr, NAND_CMD_RESET, 0);
-	DoC_WaitReady(docptr);
-
-	fofs = from;
-	DoC_Command(docptr, DoC_GetDataOffset(mtd, &fofs), 0);
-	DoC_Address(this, 3, fofs, 0, 0x00);
-	WriteDOC(0, docptr, Mplus_FlashControl);
-	DoC_WaitReady(docptr);
-
-	/* disable the ECC engine */
-	WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf);
-
-	ReadDOC(docptr, Mplus_ReadPipeInit);
-	ReadDOC(docptr, Mplus_ReadPipeInit);
-
-	/* Read the data via the internal pipeline through CDSN IO
-	   register, see Pipelined Read Operations 11.3 */
-	MemReadDOC(docptr, buf, 1054);
-	buf[1054] = ReadDOC(docptr, Mplus_LastDataRead);
-	buf[1055] = ReadDOC(docptr, Mplus_LastDataRead);
-
-	memset(&c[0], 0, sizeof(c));
-	printk("DUMP OFFSET=%x:\n", (int)from);
-
-        for (i = 0, bp = &buf[0]; (i < 1056); i++) {
-                if ((i % 16) == 0)
-                        printk("%08x: ", i);
-                printk(" %02x", *bp);
-                c[(i & 0xf)] = ((*bp >= 0x20) && (*bp <= 0x7f)) ? *bp : '.';
-                bp++;
-                if (((i + 1) % 16) == 0)
-                        printk("    %s\n", c);
-        }
-	printk("\n");
-
-	/* Disable flash internally */
-	WriteDOC(0, docptr, Mplus_FlashSelect);
-
-	return 0;
-}
-#endif
-
-static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
-		    size_t *retlen, u_char *buf)
-{
-	int ret, i;
-	volatile char dummy;
-	loff_t fofs;
-	unsigned char syndrome[6], eccbuf[6];
-	struct DiskOnChip *this = mtd->priv;
-	void __iomem * docptr = this->virtadr;
-	struct Nand *mychip = &this->chips[from >> (this->chipshift)];
-
-	/* Don't allow read past end of device */
-	if (from >= this->totlen)
-		return -EINVAL;
-
-	/* Don't allow a single read to cross a 512-byte block boundary */
-	if (from + len > ((from | 0x1ff) + 1))
-		len = ((from | 0x1ff) + 1) - from;
-
-	DoC_CheckASIC(docptr);
-
-	/* Find the chip which is to be used and select it */
-	if (this->curfloor != mychip->floor) {
-		DoC_SelectFloor(docptr, mychip->floor);
-		DoC_SelectChip(docptr, mychip->chip);
-	} else if (this->curchip != mychip->chip) {
-		DoC_SelectChip(docptr, mychip->chip);
-	}
-	this->curfloor = mychip->floor;
-	this->curchip = mychip->chip;
-
-	/* Millennium Plus bus cycle sequence as per figure 2, section 2.4 */
-	WriteDOC((DOC_FLASH_CE | DOC_FLASH_WP), docptr, Mplus_FlashSelect);
-
-	/* Reset the chip, see Software Requirement 11.4 item 1. */
-	DoC_Command(docptr, NAND_CMD_RESET, 0);
-	DoC_WaitReady(docptr);
-
-	fofs = from;
-	DoC_Command(docptr, DoC_GetDataOffset(mtd, &fofs), 0);
-	DoC_Address(this, 3, fofs, 0, 0x00);
-	WriteDOC(0, docptr, Mplus_FlashControl);
-	DoC_WaitReady(docptr);
-
-	/* init the ECC engine, see Reed-Solomon EDC/ECC 11.1 .*/
-	WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf);
-	WriteDOC(DOC_ECC_EN, docptr, Mplus_ECCConf);
-
-	/* Let the caller know we completed it */
-	*retlen = len;
-	ret = 0;
-
-	ReadDOC(docptr, Mplus_ReadPipeInit);
-	ReadDOC(docptr, Mplus_ReadPipeInit);
-
-	/* Read the data via the internal pipeline through CDSN IO
-	   register, see Pipelined Read Operations 11.3 */
-	MemReadDOC(docptr, buf, len);
-
-	/* Read the ECC data following raw data */
-	MemReadDOC(docptr, eccbuf, 4);
-	eccbuf[4] = ReadDOC(docptr, Mplus_LastDataRead);
-	eccbuf[5] = ReadDOC(docptr, Mplus_LastDataRead);
-
-	/* Flush the pipeline */
-	dummy = ReadDOC(docptr, Mplus_ECCConf);
-	dummy = ReadDOC(docptr, Mplus_ECCConf);
-
-	/* Check the ECC Status */
-	if (ReadDOC(docptr, Mplus_ECCConf) & 0x80) {
-		int nb_errors;
-		/* There was an ECC error */
-#ifdef ECC_DEBUG
-		printk("DiskOnChip ECC Error: Read at %lx\n", (long)from);
-#endif
-		/* Read the ECC syndrom through the DiskOnChip ECC logic.
-		   These syndrome will be all ZERO when there is no error */
-		for (i = 0; i < 6; i++)
-			syndrome[i] = ReadDOC(docptr, Mplus_ECCSyndrome0 + i);
-
-		nb_errors = doc_decode_ecc(buf, syndrome);
-#ifdef ECC_DEBUG
-		printk("ECC Errors corrected: %x\n", nb_errors);
-#endif
-		if (nb_errors < 0) {
-			/* We return error, but have actually done the
-			   read. Not that this can be told to user-space, via
-			   sys_read(), but at least MTD-aware stuff can know
-			   about it by checking *retlen */
-#ifdef ECC_DEBUG
-			printk("%s(%d): Millennium Plus ECC error (from=0x%x:\n",
-				__FILE__, __LINE__, (int)from);
-			printk("        syndrome= %02x:%02x:%02x:%02x:%02x:"
-				"%02x\n",
-				syndrome[0], syndrome[1], syndrome[2],
-				syndrome[3], syndrome[4], syndrome[5]);
-			printk("          eccbuf= %02x:%02x:%02x:%02x:%02x:"
-				"%02x\n",
-				eccbuf[0], eccbuf[1], eccbuf[2],
-				eccbuf[3], eccbuf[4], eccbuf[5]);
-#endif
-				ret = -EIO;
-		}
-	}
-
-#ifdef PSYCHO_DEBUG
-	printk("ECC DATA at %lx: %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
-	       (long)from, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3],
-	       eccbuf[4], eccbuf[5]);
-#endif
-	/* disable the ECC engine */
-	WriteDOC(DOC_ECC_DIS, docptr , Mplus_ECCConf);
-
-	/* Disable flash internally */
-	WriteDOC(0, docptr, Mplus_FlashSelect);
-
-	return ret;
-}
-
-static int doc_write(struct mtd_info *mtd, loff_t to, size_t len,
-		     size_t *retlen, const u_char *buf)
-{
-	int i, before, ret = 0;
-	loff_t fto;
-	volatile char dummy;
-	char eccbuf[6];
-	struct DiskOnChip *this = mtd->priv;
-	void __iomem * docptr = this->virtadr;
-	struct Nand *mychip = &this->chips[to >> (this->chipshift)];
-
-	/* Don't allow write past end of device */
-	if (to >= this->totlen)
-		return -EINVAL;
-
-	/* Don't allow writes which aren't exactly one block (512 bytes) */
-	if ((to & 0x1ff) || (len != 0x200))
-		return -EINVAL;
-
-	/* Determine position of OOB flags, before or after data */
-	before = (this->interleave && (to & 0x200));
-
-	DoC_CheckASIC(docptr);
-
-	/* Find the chip which is to be used and select it */
-	if (this->curfloor != mychip->floor) {
-		DoC_SelectFloor(docptr, mychip->floor);
-		DoC_SelectChip(docptr, mychip->chip);
-	} else if (this->curchip != mychip->chip) {
-		DoC_SelectChip(docptr, mychip->chip);
-	}
-	this->curfloor = mychip->floor;
-	this->curchip = mychip->chip;
-
-	/* Millennium Plus bus cycle sequence as per figure 2, section 2.4 */
-	WriteDOC(DOC_FLASH_CE, docptr, Mplus_FlashSelect);
-
-	/* Reset the chip, see Software Requirement 11.4 item 1. */
-	DoC_Command(docptr, NAND_CMD_RESET, 0);
-	DoC_WaitReady(docptr);
-
-	/* Set device to appropriate plane of flash */
-	fto = to;
-	WriteDOC(DoC_GetDataOffset(mtd, &fto), docptr, Mplus_FlashCmd);
-
-	/* On interleaved devices the flags for 2nd half 512 are before data */
-	if (before)
-		fto -= 2;
-
-	/* issue the Serial Data In command to initial the Page Program process */
-	DoC_Command(docptr, NAND_CMD_SEQIN, 0x00);
-	DoC_Address(this, 3, fto, 0x00, 0x00);
-
-	/* Disable the ECC engine */
-	WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf);
-
-	if (before) {
-		/* Write the block status BLOCK_USED (0x5555) */
-		WriteDOC(0x55, docptr, Mil_CDSN_IO);
-		WriteDOC(0x55, docptr, Mil_CDSN_IO);
-	}
-
-	/* init the ECC engine, see Reed-Solomon EDC/ECC 11.1 .*/
-	WriteDOC(DOC_ECC_EN | DOC_ECC_RW, docptr, Mplus_ECCConf);
-
-	MemWriteDOC(docptr, (unsigned char *) buf, len);
-
-	/* Write ECC data to flash, the ECC info is generated by
-	   the DiskOnChip ECC logic see Reed-Solomon EDC/ECC 11.1 */
-	DoC_Delay(docptr, 3);
-
-	/* Read the ECC data through the DiskOnChip ECC logic */
-	for (i = 0; i < 6; i++)
-		eccbuf[i] = ReadDOC(docptr, Mplus_ECCSyndrome0 + i);
-
-	/* disable the ECC engine */
-	WriteDOC(DOC_ECC_DIS, docptr, Mplus_ECCConf);
-
-	/* Write the ECC data to flash */
-	MemWriteDOC(docptr, eccbuf, 6);
-
-	if (!before) {
-		/* Write the block status BLOCK_USED (0x5555) */
-		WriteDOC(0x55, docptr, Mil_CDSN_IO+6);
-		WriteDOC(0x55, docptr, Mil_CDSN_IO+7);
-	}
-
-#ifdef PSYCHO_DEBUG
-	printk("OOB data at %lx is %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
-	       (long) to, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3],
-	       eccbuf[4], eccbuf[5]);
-#endif
-
-	WriteDOC(0x00, docptr, Mplus_WritePipeTerm);
-	WriteDOC(0x00, docptr, Mplus_WritePipeTerm);
-
-	/* Commit the Page Program command and wait for ready
-	   see Software Requirement 11.4 item 1.*/
-	DoC_Command(docptr, NAND_CMD_PAGEPROG, 0x00);
-	DoC_WaitReady(docptr);
-
-	/* Read the status of the flash device through CDSN IO register
-	   see Software Requirement 11.4 item 5.*/
-	DoC_Command(docptr, NAND_CMD_STATUS, 0);
-	dummy = ReadDOC(docptr, Mplus_ReadPipeInit);
-	dummy = ReadDOC(docptr, Mplus_ReadPipeInit);
-	DoC_Delay(docptr, 2);
-	if ((dummy = ReadDOC(docptr, Mplus_LastDataRead)) & 1) {
-		printk("MTD: Error 0x%x programming at 0x%x\n", dummy, (int)to);
-		/* Error in programming
-		   FIXME: implement Bad Block Replacement (in nftl.c ??) */
-		*retlen = 0;
-		ret = -EIO;
-	}
-	dummy = ReadDOC(docptr, Mplus_LastDataRead);
-
-	/* Disable flash internally */
-	WriteDOC(0, docptr, Mplus_FlashSelect);
-
-	/* Let the caller know we completed it */
-	*retlen = len;
-
-	return ret;
-}
-
-static int doc_read_oob(struct mtd_info *mtd, loff_t ofs,
-			struct mtd_oob_ops *ops)
-{
-	loff_t fofs, base;
-	struct DiskOnChip *this = mtd->priv;
-	void __iomem * docptr = this->virtadr;
-	struct Nand *mychip = &this->chips[ofs >> this->chipshift];
-	size_t i, size, got, want;
-	uint8_t *buf = ops->oobbuf;
-	size_t len = ops->len;
-
-	BUG_ON(ops->mode != MTD_OOB_PLACE);
-
-	ofs += ops->ooboffs;
-
-	DoC_CheckASIC(docptr);
-
-	/* Find the chip which is to be used and select it */
-	if (this->curfloor != mychip->floor) {
-		DoC_SelectFloor(docptr, mychip->floor);
-		DoC_SelectChip(docptr, mychip->chip);
-	} else if (this->curchip != mychip->chip) {
-		DoC_SelectChip(docptr, mychip->chip);
-	}
-	this->curfloor = mychip->floor;
-	this->curchip = mychip->chip;
-
-	/* Millennium Plus bus cycle sequence as per figure 2, section 2.4 */
-	WriteDOC((DOC_FLASH_CE | DOC_FLASH_WP), docptr, Mplus_FlashSelect);
-
-	/* disable the ECC engine */
-	WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf);
-	DoC_WaitReady(docptr);
-
-	/* Maximum of 16 bytes in the OOB region, so limit read to that */
-	if (len > 16)
-		len = 16;
-	got = 0;
-	want = len;
-
-	for (i = 0; ((i < 3) && (want > 0)); i++) {
-		/* Figure out which region we are accessing... */
-		fofs = ofs;
-		base = ofs & 0xf;
-		if (!this->interleave) {
-			DoC_Command(docptr, NAND_CMD_READOOB, 0);
-			size = 16 - base;
-		} else if (base < 6) {
-			DoC_Command(docptr, DoC_GetECCOffset(mtd, &fofs), 0);
-			size = 6 - base;
-		} else if (base < 8) {
-			DoC_Command(docptr, DoC_GetFlagsOffset(mtd, &fofs), 0);
-			size = 8 - base;
-		} else {
-			DoC_Command(docptr, DoC_GetHdrOffset(mtd, &fofs), 0);
-			size = 16 - base;
-		}
-		if (size > want)
-			size = want;
-
-		/* Issue read command */
-		DoC_Address(this, 3, fofs, 0, 0x00);
-		WriteDOC(0, docptr, Mplus_FlashControl);
-		DoC_WaitReady(docptr);
-
-		ReadDOC(docptr, Mplus_ReadPipeInit);
-		ReadDOC(docptr, Mplus_ReadPipeInit);
-		MemReadDOC(docptr, &buf[got], size - 2);
-		buf[got + size - 2] = ReadDOC(docptr, Mplus_LastDataRead);
-		buf[got + size - 1] = ReadDOC(docptr, Mplus_LastDataRead);
-
-		ofs += size;
-		got += size;
-		want -= size;
-	}
-
-	/* Disable flash internally */
-	WriteDOC(0, docptr, Mplus_FlashSelect);
-
-	ops->retlen = len;
-	return 0;
-}
-
-static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
-			 struct mtd_oob_ops *ops)
-{
-	volatile char dummy;
-	loff_t fofs, base;
-	struct DiskOnChip *this = mtd->priv;
-	void __iomem * docptr = this->virtadr;
-	struct Nand *mychip = &this->chips[ofs >> this->chipshift];
-	size_t i, size, got, want;
-	int ret = 0;
-	uint8_t *buf = ops->oobbuf;
-	size_t len = ops->len;
-
-	BUG_ON(ops->mode != MTD_OOB_PLACE);
-
-	ofs += ops->ooboffs;
-
-	DoC_CheckASIC(docptr);
-
-	/* Find the chip which is to be used and select it */
-	if (this->curfloor != mychip->floor) {
-		DoC_SelectFloor(docptr, mychip->floor);
-		DoC_SelectChip(docptr, mychip->chip);
-	} else if (this->curchip != mychip->chip) {
-		DoC_SelectChip(docptr, mychip->chip);
-	}
-	this->curfloor = mychip->floor;
-	this->curchip = mychip->chip;
-
-	/* Millennium Plus bus cycle sequence as per figure 2, section 2.4 */
-	WriteDOC(DOC_FLASH_CE, docptr, Mplus_FlashSelect);
-
-
-	/* Maximum of 16 bytes in the OOB region, so limit write to that */
-	if (len > 16)
-		len = 16;
-	got = 0;
-	want = len;
-
-	for (i = 0; ((i < 3) && (want > 0)); i++) {
-		/* Reset the chip, see Software Requirement 11.4 item 1. */
-		DoC_Command(docptr, NAND_CMD_RESET, 0);
-		DoC_WaitReady(docptr);
-
-		/* Figure out which region we are accessing... */
-		fofs = ofs;
-		base = ofs & 0x0f;
-		if (!this->interleave) {
-			WriteDOC(NAND_CMD_READOOB, docptr, Mplus_FlashCmd);
-			size = 16 - base;
-		} else if (base < 6) {
-			WriteDOC(DoC_GetECCOffset(mtd, &fofs), docptr, Mplus_FlashCmd);
-			size = 6 - base;
-		} else if (base < 8) {
-			WriteDOC(DoC_GetFlagsOffset(mtd, &fofs), docptr, Mplus_FlashCmd);
-			size = 8 - base;
-		} else {
-			WriteDOC(DoC_GetHdrOffset(mtd, &fofs), docptr, Mplus_FlashCmd);
-			size = 16 - base;
-		}
-		if (size > want)
-			size = want;
-
-		/* Issue the Serial Data In command to initial the Page Program process */
-		DoC_Command(docptr, NAND_CMD_SEQIN, 0x00);
-		DoC_Address(this, 3, fofs, 0, 0x00);
-
-		/* Disable the ECC engine */
-		WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf);
-
-		/* Write the data via the internal pipeline through CDSN IO
-		   register, see Pipelined Write Operations 11.2 */
-		MemWriteDOC(docptr, (unsigned char *) &buf[got], size);
-		WriteDOC(0x00, docptr, Mplus_WritePipeTerm);
-		WriteDOC(0x00, docptr, Mplus_WritePipeTerm);
-
-		/* Commit the Page Program command and wait for ready
-	 	   see Software Requirement 11.4 item 1.*/
-		DoC_Command(docptr, NAND_CMD_PAGEPROG, 0x00);
-		DoC_WaitReady(docptr);
-
-		/* Read the status of the flash device through CDSN IO register
-		   see Software Requirement 11.4 item 5.*/
-		DoC_Command(docptr, NAND_CMD_STATUS, 0x00);
-		dummy = ReadDOC(docptr, Mplus_ReadPipeInit);
-		dummy = ReadDOC(docptr, Mplus_ReadPipeInit);
-		DoC_Delay(docptr, 2);
-		if ((dummy = ReadDOC(docptr, Mplus_LastDataRead)) & 1) {
-			printk("MTD: Error 0x%x programming oob at 0x%x\n",
-				dummy, (int)ofs);
-			/* FIXME: implement Bad Block Replacement */
-			ops->retlen = 0;
-			ret = -EIO;
-		}
-		dummy = ReadDOC(docptr, Mplus_LastDataRead);
-
-		ofs += size;
-		got += size;
-		want -= size;
-	}
-
-	/* Disable flash internally */
-	WriteDOC(0, docptr, Mplus_FlashSelect);
-
-	ops->retlen = len;
-	return ret;
-}
-
-int doc_erase(struct mtd_info *mtd, struct erase_info *instr)
-{
-	volatile char dummy;
-	struct DiskOnChip *this = mtd->priv;
-	__u32 ofs = instr->addr;
-	__u32 len = instr->len;
-	void __iomem * docptr = this->virtadr;
-	struct Nand *mychip = &this->chips[ofs >> this->chipshift];
-
-	DoC_CheckASIC(docptr);
-
-	if (len != mtd->erasesize)
-		printk(KERN_WARNING "MTD: Erase not right size (%x != %x)n",
-		       len, mtd->erasesize);
-
-	/* Find the chip which is to be used and select it */
-	if (this->curfloor != mychip->floor) {
-		DoC_SelectFloor(docptr, mychip->floor);
-		DoC_SelectChip(docptr, mychip->chip);
-	} else if (this->curchip != mychip->chip) {
-		DoC_SelectChip(docptr, mychip->chip);
-	}
-	this->curfloor = mychip->floor;
-	this->curchip = mychip->chip;
-
-	instr->state = MTD_ERASE_PENDING;
-
-	/* Millennium Plus bus cycle sequence as per figure 2, section 2.4 */
-	WriteDOC(DOC_FLASH_CE, docptr, Mplus_FlashSelect);
-
-	DoC_Command(docptr, NAND_CMD_RESET, 0x00);
-	DoC_WaitReady(docptr);
-
-	DoC_Command(docptr, NAND_CMD_ERASE1, 0);
-	DoC_Address(this, 2, ofs, 0, 0x00);
-	DoC_Command(docptr, NAND_CMD_ERASE2, 0);
-	DoC_WaitReady(docptr);
-	instr->state = MTD_ERASING;
-
-	/* Read the status of the flash device through CDSN IO register
-	   see Software Requirement 11.4 item 5. */
-	DoC_Command(docptr, NAND_CMD_STATUS, 0);
-	dummy = ReadDOC(docptr, Mplus_ReadPipeInit);
-	dummy = ReadDOC(docptr, Mplus_ReadPipeInit);
-	if ((dummy = ReadDOC(docptr, Mplus_LastDataRead)) & 1) {
-		printk("MTD: Error 0x%x erasing at 0x%x\n", dummy, ofs);
-		/* FIXME: implement Bad Block Replacement (in nftl.c ??) */
-		instr->state = MTD_ERASE_FAILED;
-	} else {
-		instr->state = MTD_ERASE_DONE;
-	}
-	dummy = ReadDOC(docptr, Mplus_LastDataRead);
-
-	/* Disable flash internally */
-	WriteDOC(0, docptr, Mplus_FlashSelect);
-
-	mtd_erase_callback(instr);
-
-	return 0;
-}
-
-/****************************************************************************
- *
- * Module stuff
- *
- ****************************************************************************/
-
-static void __exit cleanup_doc2001plus(void)
-{
-	struct mtd_info *mtd;
-	struct DiskOnChip *this;
-
-	while ((mtd=docmilpluslist)) {
-		this = mtd->priv;
-		docmilpluslist = this->nextdoc;
-
-		del_mtd_device(mtd);
-
-		iounmap(this->virtadr);
-		kfree(this->chips);
-		kfree(mtd);
-	}
-}
-
-module_exit(cleanup_doc2001plus);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Greg Ungerer <gerg@snapgear.com> et al.");
-MODULE_DESCRIPTION("Driver for DiskOnChip Millennium Plus");
diff --git a/drivers/mtd/devices/docecc.c b/drivers/mtd/devices/docecc.c
deleted file mode 100644
index a19cda52da5..00000000000
--- a/drivers/mtd/devices/docecc.c
+++ /dev/null
@@ -1,522 +0,0 @@
-/*
- * ECC algorithm for M-systems disk on chip. We use the excellent Reed
- * Solmon code of Phil Karn (karn@ka9q.ampr.org) available under the
- * GNU GPL License. The rest is simply to convert the disk on chip
- * syndrom into a standard syndom.
- *
- * Author: Fabrice Bellard (fabrice.bellard@netgem.com)
- * Copyright (C) 2000 Netgem S.A.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/errno.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/types.h>
-
-#include <linux/mtd/compatmac.h> /* for min() in older kernels */
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/doc2000.h>
-
-#define DEBUG_ECC 0
-/* need to undef it (from asm/termbits.h) */
-#undef B0
-
-#define MM 10 /* Symbol size in bits */
-#define KK (1023-4) /* Number of data symbols per block */
-#define B0 510 /* First root of generator polynomial, alpha form */
-#define PRIM 1 /* power of alpha used to generate roots of generator poly */
-#define	NN ((1 << MM) - 1)
-
-typedef unsigned short dtype;
-
-/* 1+x^3+x^10 */
-static const int Pp[MM+1] = { 1, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1 };
-
-/* This defines the type used to store an element of the Galois Field
- * used by the code. Make sure this is something larger than a char if
- * if anything larger than GF(256) is used.
- *
- * Note: unsigned char will work up to GF(256) but int seems to run
- * faster on the Pentium.
- */
-typedef int gf;
-
-/* No legal value in index form represents zero, so
- * we need a special value for this purpose
- */
-#define A0	(NN)
-
-/* Compute x % NN, where NN is 2**MM - 1,
- * without a slow divide
- */
-static inline gf
-modnn(int x)
-{
-  while (x >= NN) {
-    x -= NN;
-    x = (x >> MM) + (x & NN);
-  }
-  return x;
-}
-
-#define	CLEAR(a,n) {\
-int ci;\
-for(ci=(n)-1;ci >=0;ci--)\
-(a)[ci] = 0;\
-}
-
-#define	COPY(a,b,n) {\
-int ci;\
-for(ci=(n)-1;ci >=0;ci--)\
-(a)[ci] = (b)[ci];\
-}
-
-#define	COPYDOWN(a,b,n) {\
-int ci;\
-for(ci=(n)-1;ci >=0;ci--)\
-(a)[ci] = (b)[ci];\
-}
-
-#define Ldec 1
-
-/* generate GF(2**m) from the irreducible polynomial p(X) in Pp[0]..Pp[m]
-   lookup tables:  index->polynomial form   alpha_to[] contains j=alpha**i;
-                   polynomial form -> index form  index_of[j=alpha**i] = i
-   alpha=2 is the primitive element of GF(2**m)
-   HARI's COMMENT: (4/13/94) alpha_to[] can be used as follows:
-        Let @ represent the primitive element commonly called "alpha" that
-   is the root of the primitive polynomial p(x). Then in GF(2^m), for any
-   0 <= i <= 2^m-2,
-        @^i = a(0) + a(1) @ + a(2) @^2 + ... + a(m-1) @^(m-1)
-   where the binary vector (a(0),a(1),a(2),...,a(m-1)) is the representation
-   of the integer "alpha_to[i]" with a(0) being the LSB and a(m-1) the MSB. Thus for
-   example the polynomial representation of @^5 would be given by the binary
-   representation of the integer "alpha_to[5]".
-                   Similarily, index_of[] can be used as follows:
-        As above, let @ represent the primitive element of GF(2^m) that is
-   the root of the primitive polynomial p(x). In order to find the power
-   of @ (alpha) that has the polynomial representation
-        a(0) + a(1) @ + a(2) @^2 + ... + a(m-1) @^(m-1)
-   we consider the integer "i" whose binary representation with a(0) being LSB
-   and a(m-1) MSB is (a(0),a(1),...,a(m-1)) and locate the entry
-   "index_of[i]". Now, @^index_of[i] is that element whose polynomial
-    representation is (a(0),a(1),a(2),...,a(m-1)).
-   NOTE:
-        The element alpha_to[2^m-1] = 0 always signifying that the
-   representation of "@^infinity" = 0 is (0,0,0,...,0).
-        Similarily, the element index_of[0] = A0 always signifying
-   that the power of alpha which has the polynomial representation
-   (0,0,...,0) is "infinity".
-
-*/
-
-static void
-generate_gf(dtype Alpha_to[NN + 1], dtype Index_of[NN + 1])
-{
-  register int i, mask;
-
-  mask = 1;
-  Alpha_to[MM] = 0;
-  for (i = 0; i < MM; i++) {
-    Alpha_to[i] = mask;
-    Index_of[Alpha_to[i]] = i;
-    /* If Pp[i] == 1 then, term @^i occurs in poly-repr of @^MM */
-    if (Pp[i] != 0)
-      Alpha_to[MM] ^= mask;	/* Bit-wise EXOR operation */
-    mask <<= 1;	/* single left-shift */
-  }
-  Index_of[Alpha_to[MM]] = MM;
-  /*
-   * Have obtained poly-repr of @^MM. Poly-repr of @^(i+1) is given by
-   * poly-repr of @^i shifted left one-bit and accounting for any @^MM
-   * term that may occur when poly-repr of @^i is shifted.
-   */
-  mask >>= 1;
-  for (i = MM + 1; i < NN; i++) {
-    if (Alpha_to[i - 1] >= mask)
-      Alpha_to[i] = Alpha_to[MM] ^ ((Alpha_to[i - 1] ^ mask) << 1);
-    else
-      Alpha_to[i] = Alpha_to[i - 1] << 1;
-    Index_of[Alpha_to[i]] = i;
-  }
-  Index_of[0] = A0;
-  Alpha_to[NN] = 0;
-}
-
-/*
- * Performs ERRORS+ERASURES decoding of RS codes. bb[] is the content
- * of the feedback shift register after having processed the data and
- * the ECC.
- *
- * Return number of symbols corrected, or -1 if codeword is illegal
- * or uncorrectable. If eras_pos is non-null, the detected error locations
- * are written back. NOTE! This array must be at least NN-KK elements long.
- * The corrected data are written in eras_val[]. They must be xor with the data
- * to retrieve the correct data : data[erase_pos[i]] ^= erase_val[i] .
- *
- * First "no_eras" erasures are declared by the calling program. Then, the
- * maximum # of errors correctable is t_after_eras = floor((NN-KK-no_eras)/2).
- * If the number of channel errors is not greater than "t_after_eras" the
- * transmitted codeword will be recovered. Details of algorithm can be found
- * in R. Blahut's "Theory ... of Error-Correcting Codes".
-
- * Warning: the eras_pos[] array must not contain duplicate entries; decoder failure
- * will result. The decoder *could* check for this condition, but it would involve
- * extra time on every decoding operation.
- * */
-static int
-eras_dec_rs(dtype Alpha_to[NN + 1], dtype Index_of[NN + 1],
-            gf bb[NN - KK + 1], gf eras_val[NN-KK], int eras_pos[NN-KK],
-            int no_eras)
-{
-  int deg_lambda, el, deg_omega;
-  int i, j, r,k;
-  gf u,q,tmp,num1,num2,den,discr_r;
-  gf lambda[NN-KK + 1], s[NN-KK + 1];	/* Err+Eras Locator poly
-					 * and syndrome poly */
-  gf b[NN-KK + 1], t[NN-KK + 1], omega[NN-KK + 1];
-  gf root[NN-KK], reg[NN-KK + 1], loc[NN-KK];
-  int syn_error, count;
-
-  syn_error = 0;
-  for(i=0;i<NN-KK;i++)
-      syn_error |= bb[i];
-
-  if (!syn_error) {
-    /* if remainder is zero, data[] is a codeword and there are no
-     * errors to correct. So return data[] unmodified
-     */
-    count = 0;
-    goto finish;
-  }
-
-  for(i=1;i<=NN-KK;i++){
-    s[i] = bb[0];
-  }
-  for(j=1;j<NN-KK;j++){
-    if(bb[j] == 0)
-      continue;
-    tmp = Index_of[bb[j]];
-
-    for(i=1;i<=NN-KK;i++)
-      s[i] ^= Alpha_to[modnn(tmp + (B0+i-1)*PRIM*j)];
-  }
-
-  /* undo the feedback register implicit multiplication and convert
-     syndromes to index form */
-
-  for(i=1;i<=NN-KK;i++) {
-      tmp = Index_of[s[i]];
-      if (tmp != A0)
-          tmp = modnn(tmp + 2 * KK * (B0+i-1)*PRIM);
-      s[i] = tmp;
-  }
-
-  CLEAR(&lambda[1],NN-KK);
-  lambda[0] = 1;
-
-  if (no_eras > 0) {
-    /* Init lambda to be the erasure locator polynomial */
-    lambda[1] = Alpha_to[modnn(PRIM * eras_pos[0])];
-    for (i = 1; i < no_eras; i++) {
-      u = modnn(PRIM*eras_pos[i]);
-      for (j = i+1; j > 0; j--) {
-	tmp = Index_of[lambda[j - 1]];
-	if(tmp != A0)
-	  lambda[j] ^= Alpha_to[modnn(u + tmp)];
-      }
-    }
-#if DEBUG_ECC >= 1
-    /* Test code that verifies the erasure locator polynomial just constructed
-       Needed only for decoder debugging. */
-
-    /* find roots of the erasure location polynomial */
-    for(i=1;i<=no_eras;i++)
-      reg[i] = Index_of[lambda[i]];
-    count = 0;
-    for (i = 1,k=NN-Ldec; i <= NN; i++,k = modnn(NN+k-Ldec)) {
-      q = 1;
-      for (j = 1; j <= no_eras; j++)
-	if (reg[j] != A0) {
-	  reg[j] = modnn(reg[j] + j);
-	  q ^= Alpha_to[reg[j]];
-	}
-      if (q != 0)
-	continue;
-      /* store root and error location number indices */
-      root[count] = i;
-      loc[count] = k;
-      count++;
-    }
-    if (count != no_eras) {
-      printf("\n lambda(x) is WRONG\n");
-      count = -1;
-      goto finish;
-    }
-#if DEBUG_ECC >= 2
-    printf("\n Erasure positions as determined by roots of Eras Loc Poly:\n");
-    for (i = 0; i < count; i++)
-      printf("%d ", loc[i]);
-    printf("\n");
-#endif
-#endif
-  }
-  for(i=0;i<NN-KK+1;i++)
-    b[i] = Index_of[lambda[i]];
-
-  /*
-   * Begin Berlekamp-Massey algorithm to determine error+erasure
-   * locator polynomial
-   */
-  r = no_eras;
-  el = no_eras;
-  while (++r <= NN-KK) {	/* r is the step number */
-    /* Compute discrepancy at the r-th step in poly-form */
-    discr_r = 0;
-    for (i = 0; i < r; i++){
-      if ((lambda[i] != 0) && (s[r - i] != A0)) {
-	discr_r ^= Alpha_to[modnn(Index_of[lambda[i]] + s[r - i])];
-      }
-    }
-    discr_r = Index_of[discr_r];	/* Index form */
-    if (discr_r == A0) {
-      /* 2 lines below: B(x) <-- x*B(x) */
-      COPYDOWN(&b[1],b,NN-KK);
-      b[0] = A0;
-    } else {
-      /* 7 lines below: T(x) <-- lambda(x) - discr_r*x*b(x) */
-      t[0] = lambda[0];
-      for (i = 0 ; i < NN-KK; i++) {
-	if(b[i] != A0)
-	  t[i+1] = lambda[i+1] ^ Alpha_to[modnn(discr_r + b[i])];
-	else
-	  t[i+1] = lambda[i+1];
-      }
-      if (2 * el <= r + no_eras - 1) {
-	el = r + no_eras - el;
-	/*
-	 * 2 lines below: B(x) <-- inv(discr_r) *
-	 * lambda(x)
-	 */
-	for (i = 0; i <= NN-KK; i++)
-	  b[i] = (lambda[i] == 0) ? A0 : modnn(Index_of[lambda[i]] - discr_r + NN);
-      } else {
-	/* 2 lines below: B(x) <-- x*B(x) */
-	COPYDOWN(&b[1],b,NN-KK);
-	b[0] = A0;
-      }
-      COPY(lambda,t,NN-KK+1);
-    }
-  }
-
-  /* Convert lambda to index form and compute deg(lambda(x)) */
-  deg_lambda = 0;
-  for(i=0;i<NN-KK+1;i++){
-    lambda[i] = Index_of[lambda[i]];
-    if(lambda[i] != A0)
-      deg_lambda = i;
-  }
-  /*
-   * Find roots of the error+erasure locator polynomial by Chien
-   * Search
-   */
-  COPY(&reg[1],&lambda[1],NN-KK);
-  count = 0;		/* Number of roots of lambda(x) */
-  for (i = 1,k=NN-Ldec; i <= NN; i++,k = modnn(NN+k-Ldec)) {
-    q = 1;
-    for (j = deg_lambda; j > 0; j--){
-      if (reg[j] != A0) {
-	reg[j] = modnn(reg[j] + j);
-	q ^= Alpha_to[reg[j]];
-      }
-    }
-    if (q != 0)
-      continue;
-    /* store root (index-form) and error location number */
-    root[count] = i;
-    loc[count] = k;
-    /* If we've already found max possible roots,
-     * abort the search to save time
-     */
-    if(++count == deg_lambda)
-      break;
-  }
-  if (deg_lambda != count) {
-    /*
-     * deg(lambda) unequal to number of roots => uncorrectable
-     * error detected
-     */
-    count = -1;
-    goto finish;
-  }
-  /*
-   * Compute err+eras evaluator poly omega(x) = s(x)*lambda(x) (modulo
-   * x**(NN-KK)). in index form. Also find deg(omega).
-   */
-  deg_omega = 0;
-  for (i = 0; i < NN-KK;i++){
-    tmp = 0;
-    j = (deg_lambda < i) ? deg_lambda : i;
-    for(;j >= 0; j--){
-      if ((s[i + 1 - j] != A0) && (lambda[j] != A0))
-	tmp ^= Alpha_to[modnn(s[i + 1 - j] + lambda[j])];
-    }
-    if(tmp != 0)
-      deg_omega = i;
-    omega[i] = Index_of[tmp];
-  }
-  omega[NN-KK] = A0;
-
-  /*
-   * Compute error values in poly-form. num1 = omega(inv(X(l))), num2 =
-   * inv(X(l))**(B0-1) and den = lambda_pr(inv(X(l))) all in poly-form
-   */
-  for (j = count-1; j >=0; j--) {
-    num1 = 0;
-    for (i = deg_omega; i >= 0; i--) {
-      if (omega[i] != A0)
-	num1  ^= Alpha_to[modnn(omega[i] + i * root[j])];
-    }
-    num2 = Alpha_to[modnn(root[j] * (B0 - 1) + NN)];
-    den = 0;
-
-    /* lambda[i+1] for i even is the formal derivative lambda_pr of lambda[i] */
-    for (i = min(deg_lambda,NN-KK-1) & ~1; i >= 0; i -=2) {
-      if(lambda[i+1] != A0)
-	den ^= Alpha_to[modnn(lambda[i+1] + i * root[j])];
-    }
-    if (den == 0) {
-#if DEBUG_ECC >= 1
-      printf("\n ERROR: denominator = 0\n");
-#endif
-      /* Convert to dual- basis */
-      count = -1;
-      goto finish;
-    }
-    /* Apply error to data */
-    if (num1 != 0) {
-        eras_val[j] = Alpha_to[modnn(Index_of[num1] + Index_of[num2] + NN - Index_of[den])];
-    } else {
-        eras_val[j] = 0;
-    }
-  }
- finish:
-  for(i=0;i<count;i++)
-      eras_pos[i] = loc[i];
-  return count;
-}
-
-/***************************************************************************/
-/* The DOC specific code begins here */
-
-#define SECTOR_SIZE 512
-/* The sector bytes are packed into NB_DATA MM bits words */
-#define NB_DATA (((SECTOR_SIZE + 1) * 8 + 6) / MM)
-
-/*
- * Correct the errors in 'sector[]' by using 'ecc1[]' which is the
- * content of the feedback shift register applyied to the sector and
- * the ECC. Return the number of errors corrected (and correct them in
- * sector), or -1 if error
- */
-int doc_decode_ecc(unsigned char sector[SECTOR_SIZE], unsigned char ecc1[6])
-{
-    int parity, i, nb_errors;
-    gf bb[NN - KK + 1];
-    gf error_val[NN-KK];
-    int error_pos[NN-KK], pos, bitpos, index, val;
-    dtype *Alpha_to, *Index_of;
-
-    /* init log and exp tables here to save memory. However, it is slower */
-    Alpha_to = kmalloc((NN + 1) * sizeof(dtype), GFP_KERNEL);
-    if (!Alpha_to)
-        return -1;
-
-    Index_of = kmalloc((NN + 1) * sizeof(dtype), GFP_KERNEL);
-    if (!Index_of) {
-        kfree(Alpha_to);
-        return -1;
-    }
-
-    generate_gf(Alpha_to, Index_of);
-
-    parity = ecc1[1];
-
-    bb[0] =  (ecc1[4] & 0xff) | ((ecc1[5] & 0x03) << 8);
-    bb[1] = ((ecc1[5] & 0xfc) >> 2) | ((ecc1[2] & 0x0f) << 6);
-    bb[2] = ((ecc1[2] & 0xf0) >> 4) | ((ecc1[3] & 0x3f) << 4);
-    bb[3] = ((ecc1[3] & 0xc0) >> 6) | ((ecc1[0] & 0xff) << 2);
-
-    nb_errors = eras_dec_rs(Alpha_to, Index_of, bb,
-                            error_val, error_pos, 0);
-    if (nb_errors <= 0)
-        goto the_end;
-
-    /* correct the errors */
-    for(i=0;i<nb_errors;i++) {
-        pos = error_pos[i];
-        if (pos >= NB_DATA && pos < KK) {
-            nb_errors = -1;
-            goto the_end;
-        }
-        if (pos < NB_DATA) {
-            /* extract bit position (MSB first) */
-            pos = 10 * (NB_DATA - 1 - pos) - 6;
-            /* now correct the following 10 bits. At most two bytes
-               can be modified since pos is even */
-            index = (pos >> 3) ^ 1;
-            bitpos = pos & 7;
-            if ((index >= 0 && index < SECTOR_SIZE) ||
-                index == (SECTOR_SIZE + 1)) {
-                val = error_val[i] >> (2 + bitpos);
-                parity ^= val;
-                if (index < SECTOR_SIZE)
-                    sector[index] ^= val;
-            }
-            index = ((pos >> 3) + 1) ^ 1;
-            bitpos = (bitpos + 10) & 7;
-            if (bitpos == 0)
-                bitpos = 8;
-            if ((index >= 0 && index < SECTOR_SIZE) ||
-                index == (SECTOR_SIZE + 1)) {
-                val = error_val[i] << (8 - bitpos);
-                parity ^= val;
-                if (index < SECTOR_SIZE)
-                    sector[index] ^= val;
-            }
-        }
-    }
-
-    /* use parity to test extra errors */
-    if ((parity & 0xff) != 0)
-        nb_errors = -1;
-
- the_end:
-    kfree(Alpha_to);
-    kfree(Index_of);
-    return nb_errors;
-}
-
-EXPORT_SYMBOL_GPL(doc_decode_ecc);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Fabrice Bellard <fabrice.bellard@netgem.com>");
-MODULE_DESCRIPTION("ECC code for correcting errors detected by DiskOnChip 2000 and Millennium ECC hardware");
diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
new file mode 100644
index 00000000000..91a169c44b3
--- /dev/null
+++ b/drivers/mtd/devices/docg3.c
@@ -0,0 +1,2143 @@
+/*
+ * Handles the M-Systems DiskOnChip G3 chip
+ *
+ * Copyright (C) 2011 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/bitmap.h>
+#include <linux/bitrev.h>
+#include <linux/bch.h>
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#define CREATE_TRACE_POINTS
+#include "docg3.h"
+
+/*
+ * This driver handles the DiskOnChip G3 flash memory.
+ *
+ * As no specification is available from M-Systems/Sandisk, this drivers lacks
+ * several functions available on the chip, as :
+ *  - IPL write
+ *
+ * The bus data width (8bits versus 16bits) is not handled (if_cfg flag), and
+ * the driver assumes a 16bits data bus.
+ *
+ * DocG3 relies on 2 ECC algorithms, which are handled in hardware :
+ *  - a 1 byte Hamming code stored in the OOB for each page
+ *  - a 7 bytes BCH code stored in the OOB for each page
+ * The BCH ECC is :
+ *  - BCH is in GF(2^14)
+ *  - BCH is over data of 520 bytes (512 page + 7 page_info bytes
+ *                                   + 1 hamming byte)
+ *  - BCH can correct up to 4 bits (t = 4)
+ *  - BCH syndroms are calculated in hardware, and checked in hardware as well
+ *
+ */
+
+static unsigned int reliable_mode;
+module_param(reliable_mode, uint, 0);
+MODULE_PARM_DESC(reliable_mode, "Set the docg3 mode (0=normal MLC, 1=fast, "
+		 "2=reliable) : MLC normal operations are in normal mode");
+
+/**
+ * struct docg3_oobinfo - DiskOnChip G3 OOB layout
+ * @eccbytes: 8 bytes are used (1 for Hamming ECC, 7 for BCH ECC)
+ * @eccpos: ecc positions (byte 7 is Hamming ECC, byte 8-14 are BCH ECC)
+ * @oobfree: free pageinfo bytes (byte 0 until byte 6, byte 15
+ * @oobavail: 8 available bytes remaining after ECC toll
+ */
+static struct nand_ecclayout docg3_oobinfo = {
+	.eccbytes = 8,
+	.eccpos = {7, 8, 9, 10, 11, 12, 13, 14},
+	.oobfree = {{0, 7}, {15, 1} },
+	.oobavail = 8,
+};
+
+static inline u8 doc_readb(struct docg3 *docg3, u16 reg)
+{
+	u8 val = readb(docg3->cascade->base + reg);
+
+	trace_docg3_io(0, 8, reg, (int)val);
+	return val;
+}
+
+static inline u16 doc_readw(struct docg3 *docg3, u16 reg)
+{
+	u16 val = readw(docg3->cascade->base + reg);
+
+	trace_docg3_io(0, 16, reg, (int)val);
+	return val;
+}
+
+static inline void doc_writeb(struct docg3 *docg3, u8 val, u16 reg)
+{
+	writeb(val, docg3->cascade->base + reg);
+	trace_docg3_io(1, 8, reg, val);
+}
+
+static inline void doc_writew(struct docg3 *docg3, u16 val, u16 reg)
+{
+	writew(val, docg3->cascade->base + reg);
+	trace_docg3_io(1, 16, reg, val);
+}
+
+static inline void doc_flash_command(struct docg3 *docg3, u8 cmd)
+{
+	doc_writeb(docg3, cmd, DOC_FLASHCOMMAND);
+}
+
+static inline void doc_flash_sequence(struct docg3 *docg3, u8 seq)
+{
+	doc_writeb(docg3, seq, DOC_FLASHSEQUENCE);
+}
+
+static inline void doc_flash_address(struct docg3 *docg3, u8 addr)
+{
+	doc_writeb(docg3, addr, DOC_FLASHADDRESS);
+}
+
+static char const * const part_probes[] = { "cmdlinepart", "saftlpart", NULL };
+
+static int doc_register_readb(struct docg3 *docg3, int reg)
+{
+	u8 val;
+
+	doc_writew(docg3, reg, DOC_READADDRESS);
+	val = doc_readb(docg3, reg);
+	doc_vdbg("Read register %04x : %02x\n", reg, val);
+	return val;
+}
+
+static int doc_register_readw(struct docg3 *docg3, int reg)
+{
+	u16 val;
+
+	doc_writew(docg3, reg, DOC_READADDRESS);
+	val = doc_readw(docg3, reg);
+	doc_vdbg("Read register %04x : %04x\n", reg, val);
+	return val;
+}
+
+/**
+ * doc_delay - delay docg3 operations
+ * @docg3: the device
+ * @nbNOPs: the number of NOPs to issue
+ *
+ * As no specification is available, the right timings between chip commands are
+ * unknown. The only available piece of information are the observed nops on a
+ * working docg3 chip.
+ * Therefore, doc_delay relies on a busy loop of NOPs, instead of scheduler
+ * friendlier msleep() functions or blocking mdelay().
+ */
+static void doc_delay(struct docg3 *docg3, int nbNOPs)
+{
+	int i;
+
+	doc_vdbg("NOP x %d\n", nbNOPs);
+	for (i = 0; i < nbNOPs; i++)
+		doc_writeb(docg3, 0, DOC_NOP);
+}
+
+static int is_prot_seq_error(struct docg3 *docg3)
+{
+	int ctrl;
+
+	ctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+	return ctrl & (DOC_CTRL_PROTECTION_ERROR | DOC_CTRL_SEQUENCE_ERROR);
+}
+
+static int doc_is_ready(struct docg3 *docg3)
+{
+	int ctrl;
+
+	ctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+	return ctrl & DOC_CTRL_FLASHREADY;
+}
+
+static int doc_wait_ready(struct docg3 *docg3)
+{
+	int maxWaitCycles = 100;
+
+	do {
+		doc_delay(docg3, 4);
+		cpu_relax();
+	} while (!doc_is_ready(docg3) && maxWaitCycles--);
+	doc_delay(docg3, 2);
+	if (maxWaitCycles > 0)
+		return 0;
+	else
+		return -EIO;
+}
+
+static int doc_reset_seq(struct docg3 *docg3)
+{
+	int ret;
+
+	doc_writeb(docg3, 0x10, DOC_FLASHCONTROL);
+	doc_flash_sequence(docg3, DOC_SEQ_RESET);
+	doc_flash_command(docg3, DOC_CMD_RESET);
+	doc_delay(docg3, 2);
+	ret = doc_wait_ready(docg3);
+
+	doc_dbg("doc_reset_seq() -> isReady=%s\n", ret ? "false" : "true");
+	return ret;
+}
+
+/**
+ * doc_read_data_area - Read data from data area
+ * @docg3: the device
+ * @buf: the buffer to fill in (might be NULL is dummy reads)
+ * @len: the length to read
+ * @first: first time read, DOC_READADDRESS should be set
+ *
+ * Reads bytes from flash data. Handles the single byte / even bytes reads.
+ */
+static void doc_read_data_area(struct docg3 *docg3, void *buf, int len,
+			       int first)
+{
+	int i, cdr, len4;
+	u16 data16, *dst16;
+	u8 data8, *dst8;
+
+	doc_dbg("doc_read_data_area(buf=%p, len=%d)\n", buf, len);
+	cdr = len & 0x1;
+	len4 = len - cdr;
+
+	if (first)
+		doc_writew(docg3, DOC_IOSPACE_DATA, DOC_READADDRESS);
+	dst16 = buf;
+	for (i = 0; i < len4; i += 2) {
+		data16 = doc_readw(docg3, DOC_IOSPACE_DATA);
+		if (dst16) {
+			*dst16 = data16;
+			dst16++;
+		}
+	}
+
+	if (cdr) {
+		doc_writew(docg3, DOC_IOSPACE_DATA | DOC_READADDR_ONE_BYTE,
+			   DOC_READADDRESS);
+		doc_delay(docg3, 1);
+		dst8 = (u8 *)dst16;
+		for (i = 0; i < cdr; i++) {
+			data8 = doc_readb(docg3, DOC_IOSPACE_DATA);
+			if (dst8) {
+				*dst8 = data8;
+				dst8++;
+			}
+		}
+	}
+}
+
+/**
+ * doc_write_data_area - Write data into data area
+ * @docg3: the device
+ * @buf: the buffer to get input bytes from
+ * @len: the length to write
+ *
+ * Writes bytes into flash data. Handles the single byte / even bytes writes.
+ */
+static void doc_write_data_area(struct docg3 *docg3, const void *buf, int len)
+{
+	int i, cdr, len4;
+	u16 *src16;
+	u8 *src8;
+
+	doc_dbg("doc_write_data_area(buf=%p, len=%d)\n", buf, len);
+	cdr = len & 0x3;
+	len4 = len - cdr;
+
+	doc_writew(docg3, DOC_IOSPACE_DATA, DOC_READADDRESS);
+	src16 = (u16 *)buf;
+	for (i = 0; i < len4; i += 2) {
+		doc_writew(docg3, *src16, DOC_IOSPACE_DATA);
+		src16++;
+	}
+
+	src8 = (u8 *)src16;
+	for (i = 0; i < cdr; i++) {
+		doc_writew(docg3, DOC_IOSPACE_DATA | DOC_READADDR_ONE_BYTE,
+			   DOC_READADDRESS);
+		doc_writeb(docg3, *src8, DOC_IOSPACE_DATA);
+		src8++;
+	}
+}
+
+/**
+ * doc_set_data_mode - Sets the flash to normal or reliable data mode
+ * @docg3: the device
+ *
+ * The reliable data mode is a bit slower than the fast mode, but less errors
+ * occur.  Entering the reliable mode cannot be done without entering the fast
+ * mode first.
+ *
+ * In reliable mode, pages 2*n and 2*n+1 are clones. Writing to page 0 of blocks
+ * (4,5) make the hardware write also to page 1 of blocks blocks(4,5). Reading
+ * from page 0 of blocks (4,5) or from page 1 of blocks (4,5) gives the same
+ * result, which is a logical and between bytes from page 0 and page 1 (which is
+ * consistent with the fact that writing to a page is _clearing_ bits of that
+ * page).
+ */
+static void doc_set_reliable_mode(struct docg3 *docg3)
+{
+	static char *strmode[] = { "normal", "fast", "reliable", "invalid" };
+
+	doc_dbg("doc_set_reliable_mode(%s)\n", strmode[docg3->reliable]);
+	switch (docg3->reliable) {
+	case 0:
+		break;
+	case 1:
+		doc_flash_sequence(docg3, DOC_SEQ_SET_FASTMODE);
+		doc_flash_command(docg3, DOC_CMD_FAST_MODE);
+		break;
+	case 2:
+		doc_flash_sequence(docg3, DOC_SEQ_SET_RELIABLEMODE);
+		doc_flash_command(docg3, DOC_CMD_FAST_MODE);
+		doc_flash_command(docg3, DOC_CMD_RELIABLE_MODE);
+		break;
+	default:
+		doc_err("doc_set_reliable_mode(): invalid mode\n");
+		break;
+	}
+	doc_delay(docg3, 2);
+}
+
+/**
+ * doc_set_asic_mode - Set the ASIC mode
+ * @docg3: the device
+ * @mode: the mode
+ *
+ * The ASIC can work in 3 modes :
+ *  - RESET: all registers are zeroed
+ *  - NORMAL: receives and handles commands
+ *  - POWERDOWN: minimal poweruse, flash parts shut off
+ */
+static void doc_set_asic_mode(struct docg3 *docg3, u8 mode)
+{
+	int i;
+
+	for (i = 0; i < 12; i++)
+		doc_readb(docg3, DOC_IOSPACE_IPL);
+
+	mode |= DOC_ASICMODE_MDWREN;
+	doc_dbg("doc_set_asic_mode(%02x)\n", mode);
+	doc_writeb(docg3, mode, DOC_ASICMODE);
+	doc_writeb(docg3, ~mode, DOC_ASICMODECONFIRM);
+	doc_delay(docg3, 1);
+}
+
+/**
+ * doc_set_device_id - Sets the devices id for cascaded G3 chips
+ * @docg3: the device
+ * @id: the chip to select (amongst 0, 1, 2, 3)
+ *
+ * There can be 4 cascaded G3 chips. This function selects the one which will
+ * should be the active one.
+ */
+static void doc_set_device_id(struct docg3 *docg3, int id)
+{
+	u8 ctrl;
+
+	doc_dbg("doc_set_device_id(%d)\n", id);
+	doc_writeb(docg3, id, DOC_DEVICESELECT);
+	ctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+
+	ctrl &= ~DOC_CTRL_VIOLATION;
+	ctrl |= DOC_CTRL_CE;
+	doc_writeb(docg3, ctrl, DOC_FLASHCONTROL);
+}
+
+/**
+ * doc_set_extra_page_mode - Change flash page layout
+ * @docg3: the device
+ *
+ * Normally, the flash page is split into the data (512 bytes) and the out of
+ * band data (16 bytes). For each, 4 more bytes can be accessed, where the wear
+ * leveling counters are stored.  To access this last area of 4 bytes, a special
+ * mode must be input to the flash ASIC.
+ *
+ * Returns 0 if no error occurred, -EIO else.
+ */
+static int doc_set_extra_page_mode(struct docg3 *docg3)
+{
+	int fctrl;
+
+	doc_dbg("doc_set_extra_page_mode()\n");
+	doc_flash_sequence(docg3, DOC_SEQ_PAGE_SIZE_532);
+	doc_flash_command(docg3, DOC_CMD_PAGE_SIZE_532);
+	doc_delay(docg3, 2);
+
+	fctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+	if (fctrl & (DOC_CTRL_PROTECTION_ERROR | DOC_CTRL_SEQUENCE_ERROR))
+		return -EIO;
+	else
+		return 0;
+}
+
+/**
+ * doc_setup_addr_sector - Setup blocks/page/ofs address for one plane
+ * @docg3: the device
+ * @sector: the sector
+ */
+static void doc_setup_addr_sector(struct docg3 *docg3, int sector)
+{
+	doc_delay(docg3, 1);
+	doc_flash_address(docg3, sector & 0xff);
+	doc_flash_address(docg3, (sector >> 8) & 0xff);
+	doc_flash_address(docg3, (sector >> 16) & 0xff);
+	doc_delay(docg3, 1);
+}
+
+/**
+ * doc_setup_writeaddr_sector - Setup blocks/page/ofs address for one plane
+ * @docg3: the device
+ * @sector: the sector
+ * @ofs: the offset in the page, between 0 and (512 + 16 + 512)
+ */
+static void doc_setup_writeaddr_sector(struct docg3 *docg3, int sector, int ofs)
+{
+	ofs = ofs >> 2;
+	doc_delay(docg3, 1);
+	doc_flash_address(docg3, ofs & 0xff);
+	doc_flash_address(docg3, sector & 0xff);
+	doc_flash_address(docg3, (sector >> 8) & 0xff);
+	doc_flash_address(docg3, (sector >> 16) & 0xff);
+	doc_delay(docg3, 1);
+}
+
+/**
+ * doc_seek - Set both flash planes to the specified block, page for reading
+ * @docg3: the device
+ * @block0: the first plane block index
+ * @block1: the second plane block index
+ * @page: the page index within the block
+ * @wear: if true, read will occur on the 4 extra bytes of the wear area
+ * @ofs: offset in page to read
+ *
+ * Programs the flash even and odd planes to the specific block and page.
+ * Alternatively, programs the flash to the wear area of the specified page.
+ */
+static int doc_read_seek(struct docg3 *docg3, int block0, int block1, int page,
+			 int wear, int ofs)
+{
+	int sector, ret = 0;
+
+	doc_dbg("doc_seek(blocks=(%d,%d), page=%d, ofs=%d, wear=%d)\n",
+		block0, block1, page, ofs, wear);
+
+	if (!wear && (ofs < 2 * DOC_LAYOUT_PAGE_SIZE)) {
+		doc_flash_sequence(docg3, DOC_SEQ_SET_PLANE1);
+		doc_flash_command(docg3, DOC_CMD_READ_PLANE1);
+		doc_delay(docg3, 2);
+	} else {
+		doc_flash_sequence(docg3, DOC_SEQ_SET_PLANE2);
+		doc_flash_command(docg3, DOC_CMD_READ_PLANE2);
+		doc_delay(docg3, 2);
+	}
+
+	doc_set_reliable_mode(docg3);
+	if (wear)
+		ret = doc_set_extra_page_mode(docg3);
+	if (ret)
+		goto out;
+
+	doc_flash_sequence(docg3, DOC_SEQ_READ);
+	sector = (block0 << DOC_ADDR_BLOCK_SHIFT) + (page & DOC_ADDR_PAGE_MASK);
+	doc_flash_command(docg3, DOC_CMD_PROG_BLOCK_ADDR);
+	doc_setup_addr_sector(docg3, sector);
+
+	sector = (block1 << DOC_ADDR_BLOCK_SHIFT) + (page & DOC_ADDR_PAGE_MASK);
+	doc_flash_command(docg3, DOC_CMD_PROG_BLOCK_ADDR);
+	doc_setup_addr_sector(docg3, sector);
+	doc_delay(docg3, 1);
+
+out:
+	return ret;
+}
+
+/**
+ * doc_write_seek - Set both flash planes to the specified block, page for writing
+ * @docg3: the device
+ * @block0: the first plane block index
+ * @block1: the second plane block index
+ * @page: the page index within the block
+ * @ofs: offset in page to write
+ *
+ * Programs the flash even and odd planes to the specific block and page.
+ * Alternatively, programs the flash to the wear area of the specified page.
+ */
+static int doc_write_seek(struct docg3 *docg3, int block0, int block1, int page,
+			 int ofs)
+{
+	int ret = 0, sector;
+
+	doc_dbg("doc_write_seek(blocks=(%d,%d), page=%d, ofs=%d)\n",
+		block0, block1, page, ofs);
+
+	doc_set_reliable_mode(docg3);
+
+	if (ofs < 2 * DOC_LAYOUT_PAGE_SIZE) {
+		doc_flash_sequence(docg3, DOC_SEQ_SET_PLANE1);
+		doc_flash_command(docg3, DOC_CMD_READ_PLANE1);
+		doc_delay(docg3, 2);
+	} else {
+		doc_flash_sequence(docg3, DOC_SEQ_SET_PLANE2);
+		doc_flash_command(docg3, DOC_CMD_READ_PLANE2);
+		doc_delay(docg3, 2);
+	}
+
+	doc_flash_sequence(docg3, DOC_SEQ_PAGE_SETUP);
+	doc_flash_command(docg3, DOC_CMD_PROG_CYCLE1);
+
+	sector = (block0 << DOC_ADDR_BLOCK_SHIFT) + (page & DOC_ADDR_PAGE_MASK);
+	doc_setup_writeaddr_sector(docg3, sector, ofs);
+
+	doc_flash_command(docg3, DOC_CMD_PROG_CYCLE3);
+	doc_delay(docg3, 2);
+	ret = doc_wait_ready(docg3);
+	if (ret)
+		goto out;
+
+	doc_flash_command(docg3, DOC_CMD_PROG_CYCLE1);
+	sector = (block1 << DOC_ADDR_BLOCK_SHIFT) + (page & DOC_ADDR_PAGE_MASK);
+	doc_setup_writeaddr_sector(docg3, sector, ofs);
+	doc_delay(docg3, 1);
+
+out:
+	return ret;
+}
+
+
+/**
+ * doc_read_page_ecc_init - Initialize hardware ECC engine
+ * @docg3: the device
+ * @len: the number of bytes covered by the ECC (BCH covered)
+ *
+ * The function does initialize the hardware ECC engine to compute the Hamming
+ * ECC (on 1 byte) and the BCH hardware ECC (on 7 bytes).
+ *
+ * Return 0 if succeeded, -EIO on error
+ */
+static int doc_read_page_ecc_init(struct docg3 *docg3, int len)
+{
+	doc_writew(docg3, DOC_ECCCONF0_READ_MODE
+		   | DOC_ECCCONF0_BCH_ENABLE | DOC_ECCCONF0_HAMMING_ENABLE
+		   | (len & DOC_ECCCONF0_DATA_BYTES_MASK),
+		   DOC_ECCCONF0);
+	doc_delay(docg3, 4);
+	doc_register_readb(docg3, DOC_FLASHCONTROL);
+	return doc_wait_ready(docg3);
+}
+
+/**
+ * doc_write_page_ecc_init - Initialize hardware BCH ECC engine
+ * @docg3: the device
+ * @len: the number of bytes covered by the ECC (BCH covered)
+ *
+ * The function does initialize the hardware ECC engine to compute the Hamming
+ * ECC (on 1 byte) and the BCH hardware ECC (on 7 bytes).
+ *
+ * Return 0 if succeeded, -EIO on error
+ */
+static int doc_write_page_ecc_init(struct docg3 *docg3, int len)
+{
+	doc_writew(docg3, DOC_ECCCONF0_WRITE_MODE
+		   | DOC_ECCCONF0_BCH_ENABLE | DOC_ECCCONF0_HAMMING_ENABLE
+		   | (len & DOC_ECCCONF0_DATA_BYTES_MASK),
+		   DOC_ECCCONF0);
+	doc_delay(docg3, 4);
+	doc_register_readb(docg3, DOC_FLASHCONTROL);
+	return doc_wait_ready(docg3);
+}
+
+/**
+ * doc_ecc_disable - Disable Hamming and BCH ECC hardware calculator
+ * @docg3: the device
+ *
+ * Disables the hardware ECC generator and checker, for unchecked reads (as when
+ * reading OOB only or write status byte).
+ */
+static void doc_ecc_disable(struct docg3 *docg3)
+{
+	doc_writew(docg3, DOC_ECCCONF0_READ_MODE, DOC_ECCCONF0);
+	doc_delay(docg3, 4);
+}
+
+/**
+ * doc_hamming_ecc_init - Initialize hardware Hamming ECC engine
+ * @docg3: the device
+ * @nb_bytes: the number of bytes covered by the ECC (Hamming covered)
+ *
+ * This function programs the ECC hardware to compute the hamming code on the
+ * last provided N bytes to the hardware generator.
+ */
+static void doc_hamming_ecc_init(struct docg3 *docg3, int nb_bytes)
+{
+	u8 ecc_conf1;
+
+	ecc_conf1 = doc_register_readb(docg3, DOC_ECCCONF1);
+	ecc_conf1 &= ~DOC_ECCCONF1_HAMMING_BITS_MASK;
+	ecc_conf1 |= (nb_bytes & DOC_ECCCONF1_HAMMING_BITS_MASK);
+	doc_writeb(docg3, ecc_conf1, DOC_ECCCONF1);
+}
+
+/**
+ * doc_ecc_bch_fix_data - Fix if need be read data from flash
+ * @docg3: the device
+ * @buf: the buffer of read data (512 + 7 + 1 bytes)
+ * @hwecc: the hardware calculated ECC.
+ *         It's in fact recv_ecc ^ calc_ecc, where recv_ecc was read from OOB
+ *         area data, and calc_ecc the ECC calculated by the hardware generator.
+ *
+ * Checks if the received data matches the ECC, and if an error is detected,
+ * tries to fix the bit flips (at most 4) in the buffer buf.  As the docg3
+ * understands the (data, ecc, syndroms) in an inverted order in comparison to
+ * the BCH library, the function reverses the order of bits (ie. bit7 and bit0,
+ * bit6 and bit 1, ...) for all ECC data.
+ *
+ * The hardware ecc unit produces oob_ecc ^ calc_ecc.  The kernel's bch
+ * algorithm is used to decode this.  However the hw operates on page
+ * data in a bit order that is the reverse of that of the bch alg,
+ * requiring that the bits be reversed on the result.  Thanks to Ivan
+ * Djelic for his analysis.
+ *
+ * Returns number of fixed bits (0, 1, 2, 3, 4) or -EBADMSG if too many bit
+ * errors were detected and cannot be fixed.
+ */
+static int doc_ecc_bch_fix_data(struct docg3 *docg3, void *buf, u8 *hwecc)
+{
+	u8 ecc[DOC_ECC_BCH_SIZE];
+	int errorpos[DOC_ECC_BCH_T], i, numerrs;
+
+	for (i = 0; i < DOC_ECC_BCH_SIZE; i++)
+		ecc[i] = bitrev8(hwecc[i]);
+	numerrs = decode_bch(docg3->cascade->bch, NULL,
+			     DOC_ECC_BCH_COVERED_BYTES,
+			     NULL, ecc, NULL, errorpos);
+	BUG_ON(numerrs == -EINVAL);
+	if (numerrs < 0)
+		goto out;
+
+	for (i = 0; i < numerrs; i++)
+		errorpos[i] = (errorpos[i] & ~7) | (7 - (errorpos[i] & 7));
+	for (i = 0; i < numerrs; i++)
+		if (errorpos[i] < DOC_ECC_BCH_COVERED_BYTES*8)
+			/* error is located in data, correct it */
+			change_bit(errorpos[i], buf);
+out:
+	doc_dbg("doc_ecc_bch_fix_data: flipped %d bits\n", numerrs);
+	return numerrs;
+}
+
+
+/**
+ * doc_read_page_prepare - Prepares reading data from a flash page
+ * @docg3: the device
+ * @block0: the first plane block index on flash memory
+ * @block1: the second plane block index on flash memory
+ * @page: the page index in the block
+ * @offset: the offset in the page (must be a multiple of 4)
+ *
+ * Prepares the page to be read in the flash memory :
+ *   - tell ASIC to map the flash pages
+ *   - tell ASIC to be in read mode
+ *
+ * After a call to this method, a call to doc_read_page_finish is mandatory,
+ * to end the read cycle of the flash.
+ *
+ * Read data from a flash page. The length to be read must be between 0 and
+ * (page_size + oob_size + wear_size), ie. 532, and a multiple of 4 (because
+ * the extra bytes reading is not implemented).
+ *
+ * As pages are grouped by 2 (in 2 planes), reading from a page must be done
+ * in two steps:
+ *  - one read of 512 bytes at offset 0
+ *  - one read of 512 bytes at offset 512 + 16
+ *
+ * Returns 0 if successful, -EIO if a read error occurred.
+ */
+static int doc_read_page_prepare(struct docg3 *docg3, int block0, int block1,
+				 int page, int offset)
+{
+	int wear_area = 0, ret = 0;
+
+	doc_dbg("doc_read_page_prepare(blocks=(%d,%d), page=%d, ofsInPage=%d)\n",
+		block0, block1, page, offset);
+	if (offset >= DOC_LAYOUT_WEAR_OFFSET)
+		wear_area = 1;
+	if (!wear_area && offset > (DOC_LAYOUT_PAGE_OOB_SIZE * 2))
+		return -EINVAL;
+
+	doc_set_device_id(docg3, docg3->device_id);
+	ret = doc_reset_seq(docg3);
+	if (ret)
+		goto err;
+
+	/* Program the flash address block and page */
+	ret = doc_read_seek(docg3, block0, block1, page, wear_area, offset);
+	if (ret)
+		goto err;
+
+	doc_flash_command(docg3, DOC_CMD_READ_ALL_PLANES);
+	doc_delay(docg3, 2);
+	doc_wait_ready(docg3);
+
+	doc_flash_command(docg3, DOC_CMD_SET_ADDR_READ);
+	doc_delay(docg3, 1);
+	if (offset >= DOC_LAYOUT_PAGE_SIZE * 2)
+		offset -= 2 * DOC_LAYOUT_PAGE_SIZE;
+	doc_flash_address(docg3, offset >> 2);
+	doc_delay(docg3, 1);
+	doc_wait_ready(docg3);
+
+	doc_flash_command(docg3, DOC_CMD_READ_FLASH);
+
+	return 0;
+err:
+	doc_writeb(docg3, 0, DOC_DATAEND);
+	doc_delay(docg3, 2);
+	return -EIO;
+}
+
+/**
+ * doc_read_page_getbytes - Reads bytes from a prepared page
+ * @docg3: the device
+ * @len: the number of bytes to be read (must be a multiple of 4)
+ * @buf: the buffer to be filled in (or NULL is forget bytes)
+ * @first: 1 if first time read, DOC_READADDRESS should be set
+ * @last_odd: 1 if last read ended up on an odd byte
+ *
+ * Reads bytes from a prepared page. There is a trickery here : if the last read
+ * ended up on an odd offset in the 1024 bytes double page, ie. between the 2
+ * planes, the first byte must be read apart. If a word (16bit) read was used,
+ * the read would return the byte of plane 2 as low *and* high endian, which
+ * will mess the read.
+ *
+ */
+static int doc_read_page_getbytes(struct docg3 *docg3, int len, u_char *buf,
+				  int first, int last_odd)
+{
+	if (last_odd && len > 0) {
+		doc_read_data_area(docg3, buf, 1, first);
+		doc_read_data_area(docg3, buf ? buf + 1 : buf, len - 1, 0);
+	} else {
+		doc_read_data_area(docg3, buf, len, first);
+	}
+	doc_delay(docg3, 2);
+	return len;
+}
+
+/**
+ * doc_write_page_putbytes - Writes bytes into a prepared page
+ * @docg3: the device
+ * @len: the number of bytes to be written
+ * @buf: the buffer of input bytes
+ *
+ */
+static void doc_write_page_putbytes(struct docg3 *docg3, int len,
+				    const u_char *buf)
+{
+	doc_write_data_area(docg3, buf, len);
+	doc_delay(docg3, 2);
+}
+
+/**
+ * doc_get_bch_hw_ecc - Get hardware calculated BCH ECC
+ * @docg3: the device
+ * @hwecc:  the array of 7 integers where the hardware ecc will be stored
+ */
+static void doc_get_bch_hw_ecc(struct docg3 *docg3, u8 *hwecc)
+{
+	int i;
+
+	for (i = 0; i < DOC_ECC_BCH_SIZE; i++)
+		hwecc[i] = doc_register_readb(docg3, DOC_BCH_HW_ECC(i));
+}
+
+/**
+ * doc_page_finish - Ends reading/writing of a flash page
+ * @docg3: the device
+ */
+static void doc_page_finish(struct docg3 *docg3)
+{
+	doc_writeb(docg3, 0, DOC_DATAEND);
+	doc_delay(docg3, 2);
+}
+
+/**
+ * doc_read_page_finish - Ends reading of a flash page
+ * @docg3: the device
+ *
+ * As a side effect, resets the chip selector to 0. This ensures that after each
+ * read operation, the floor 0 is selected. Therefore, if the systems halts, the
+ * reboot will boot on floor 0, where the IPL is.
+ */
+static void doc_read_page_finish(struct docg3 *docg3)
+{
+	doc_page_finish(docg3);
+	doc_set_device_id(docg3, 0);
+}
+
+/**
+ * calc_block_sector - Calculate blocks, pages and ofs.
+
+ * @from: offset in flash
+ * @block0: first plane block index calculated
+ * @block1: second plane block index calculated
+ * @page: page calculated
+ * @ofs: offset in page
+ * @reliable: 0 if docg3 in normal mode, 1 if docg3 in fast mode, 2 if docg3 in
+ * reliable mode.
+ *
+ * The calculation is based on the reliable/normal mode. In normal mode, the 64
+ * pages of a block are available. In reliable mode, as pages 2*n and 2*n+1 are
+ * clones, only 32 pages per block are available.
+ */
+static void calc_block_sector(loff_t from, int *block0, int *block1, int *page,
+			      int *ofs, int reliable)
+{
+	uint sector, pages_biblock;
+
+	pages_biblock = DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_NBPLANES;
+	if (reliable == 1 || reliable == 2)
+		pages_biblock /= 2;
+
+	sector = from / DOC_LAYOUT_PAGE_SIZE;
+	*block0 = sector / pages_biblock * DOC_LAYOUT_NBPLANES;
+	*block1 = *block0 + 1;
+	*page = sector % pages_biblock;
+	*page /= DOC_LAYOUT_NBPLANES;
+	if (reliable == 1 || reliable == 2)
+		*page *= 2;
+	if (sector % 2)
+		*ofs = DOC_LAYOUT_PAGE_OOB_SIZE;
+	else
+		*ofs = 0;
+}
+
+/**
+ * doc_read_oob - Read out of band bytes from flash
+ * @mtd: the device
+ * @from: the offset from first block and first page, in bytes, aligned on page
+ *        size
+ * @ops: the mtd oob structure
+ *
+ * Reads flash memory OOB area of pages.
+ *
+ * Returns 0 if read successful, of -EIO, -EINVAL if an error occurred
+ */
+static int doc_read_oob(struct mtd_info *mtd, loff_t from,
+			struct mtd_oob_ops *ops)
+{
+	struct docg3 *docg3 = mtd->priv;
+	int block0, block1, page, ret, skip, ofs = 0;
+	u8 *oobbuf = ops->oobbuf;
+	u8 *buf = ops->datbuf;
+	size_t len, ooblen, nbdata, nboob;
+	u8 hwecc[DOC_ECC_BCH_SIZE], eccconf1;
+	int max_bitflips = 0;
+
+	if (buf)
+		len = ops->len;
+	else
+		len = 0;
+	if (oobbuf)
+		ooblen = ops->ooblen;
+	else
+		ooblen = 0;
+
+	if (oobbuf && ops->mode == MTD_OPS_PLACE_OOB)
+		oobbuf += ops->ooboffs;
+
+	doc_dbg("doc_read_oob(from=%lld, mode=%d, data=(%p:%zu), oob=(%p:%zu))\n",
+		from, ops->mode, buf, len, oobbuf, ooblen);
+	if (ooblen % DOC_LAYOUT_OOB_SIZE)
+		return -EINVAL;
+
+	if (from + len > mtd->size)
+		return -EINVAL;
+
+	ops->oobretlen = 0;
+	ops->retlen = 0;
+	ret = 0;
+	skip = from % DOC_LAYOUT_PAGE_SIZE;
+	mutex_lock(&docg3->cascade->lock);
+	while (ret >= 0 && (len > 0 || ooblen > 0)) {
+		calc_block_sector(from - skip, &block0, &block1, &page, &ofs,
+			docg3->reliable);
+		nbdata = min_t(size_t, len, DOC_LAYOUT_PAGE_SIZE - skip);
+		nboob = min_t(size_t, ooblen, (size_t)DOC_LAYOUT_OOB_SIZE);
+		ret = doc_read_page_prepare(docg3, block0, block1, page, ofs);
+		if (ret < 0)
+			goto out;
+		ret = doc_read_page_ecc_init(docg3, DOC_ECC_BCH_TOTAL_BYTES);
+		if (ret < 0)
+			goto err_in_read;
+		ret = doc_read_page_getbytes(docg3, skip, NULL, 1, 0);
+		if (ret < skip)
+			goto err_in_read;
+		ret = doc_read_page_getbytes(docg3, nbdata, buf, 0, skip % 2);
+		if (ret < nbdata)
+			goto err_in_read;
+		doc_read_page_getbytes(docg3,
+				       DOC_LAYOUT_PAGE_SIZE - nbdata - skip,
+				       NULL, 0, (skip + nbdata) % 2);
+		ret = doc_read_page_getbytes(docg3, nboob, oobbuf, 0, 0);
+		if (ret < nboob)
+			goto err_in_read;
+		doc_read_page_getbytes(docg3, DOC_LAYOUT_OOB_SIZE - nboob,
+				       NULL, 0, nboob % 2);
+
+		doc_get_bch_hw_ecc(docg3, hwecc);
+		eccconf1 = doc_register_readb(docg3, DOC_ECCCONF1);
+
+		if (nboob >= DOC_LAYOUT_OOB_SIZE) {
+			doc_dbg("OOB - INFO: %*phC\n", 7, oobbuf);
+			doc_dbg("OOB - HAMMING: %02x\n", oobbuf[7]);
+			doc_dbg("OOB - BCH_ECC: %*phC\n", 7, oobbuf + 8);
+			doc_dbg("OOB - UNUSED: %02x\n", oobbuf[15]);
+		}
+		doc_dbg("ECC checks: ECCConf1=%x\n", eccconf1);
+		doc_dbg("ECC HW_ECC: %*phC\n", 7, hwecc);
+
+		ret = -EIO;
+		if (is_prot_seq_error(docg3))
+			goto err_in_read;
+		ret = 0;
+		if ((block0 >= DOC_LAYOUT_BLOCK_FIRST_DATA) &&
+		    (eccconf1 & DOC_ECCCONF1_BCH_SYNDROM_ERR) &&
+		    (eccconf1 & DOC_ECCCONF1_PAGE_IS_WRITTEN) &&
+		    (ops->mode != MTD_OPS_RAW) &&
+		    (nbdata == DOC_LAYOUT_PAGE_SIZE)) {
+			ret = doc_ecc_bch_fix_data(docg3, buf, hwecc);
+			if (ret < 0) {
+				mtd->ecc_stats.failed++;
+				ret = -EBADMSG;
+			}
+			if (ret > 0) {
+				mtd->ecc_stats.corrected += ret;
+				max_bitflips = max(max_bitflips, ret);
+				ret = max_bitflips;
+			}
+		}
+
+		doc_read_page_finish(docg3);
+		ops->retlen += nbdata;
+		ops->oobretlen += nboob;
+		buf += nbdata;
+		oobbuf += nboob;
+		len -= nbdata;
+		ooblen -= nboob;
+		from += DOC_LAYOUT_PAGE_SIZE;
+		skip = 0;
+	}
+
+out:
+	mutex_unlock(&docg3->cascade->lock);
+	return ret;
+err_in_read:
+	doc_read_page_finish(docg3);
+	goto out;
+}
+
+/**
+ * doc_read - Read bytes from flash
+ * @mtd: the device
+ * @from: the offset from first block and first page, in bytes, aligned on page
+ *        size
+ * @len: the number of bytes to read (must be a multiple of 4)
+ * @retlen: the number of bytes actually read
+ * @buf: the filled in buffer
+ *
+ * Reads flash memory pages. This function does not read the OOB chunk, but only
+ * the page data.
+ *
+ * Returns 0 if read successful, of -EIO, -EINVAL if an error occurred
+ */
+static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
+	     size_t *retlen, u_char *buf)
+{
+	struct mtd_oob_ops ops;
+	size_t ret;
+
+	memset(&ops, 0, sizeof(ops));
+	ops.datbuf = buf;
+	ops.len = len;
+	ops.mode = MTD_OPS_AUTO_OOB;
+
+	ret = doc_read_oob(mtd, from, &ops);
+	*retlen = ops.retlen;
+	return ret;
+}
+
+static int doc_reload_bbt(struct docg3 *docg3)
+{
+	int block = DOC_LAYOUT_BLOCK_BBT;
+	int ret = 0, nbpages, page;
+	u_char *buf = docg3->bbt;
+
+	nbpages = DIV_ROUND_UP(docg3->max_block + 1, 8 * DOC_LAYOUT_PAGE_SIZE);
+	for (page = 0; !ret && (page < nbpages); page++) {
+		ret = doc_read_page_prepare(docg3, block, block + 1,
+					    page + DOC_LAYOUT_PAGE_BBT, 0);
+		if (!ret)
+			ret = doc_read_page_ecc_init(docg3,
+						     DOC_LAYOUT_PAGE_SIZE);
+		if (!ret)
+			doc_read_page_getbytes(docg3, DOC_LAYOUT_PAGE_SIZE,
+					       buf, 1, 0);
+		buf += DOC_LAYOUT_PAGE_SIZE;
+	}
+	doc_read_page_finish(docg3);
+	return ret;
+}
+
+/**
+ * doc_block_isbad - Checks whether a block is good or not
+ * @mtd: the device
+ * @from: the offset to find the correct block
+ *
+ * Returns 1 if block is bad, 0 if block is good
+ */
+static int doc_block_isbad(struct mtd_info *mtd, loff_t from)
+{
+	struct docg3 *docg3 = mtd->priv;
+	int block0, block1, page, ofs, is_good;
+
+	calc_block_sector(from, &block0, &block1, &page, &ofs,
+		docg3->reliable);
+	doc_dbg("doc_block_isbad(from=%lld) => block=(%d,%d), page=%d, ofs=%d\n",
+		from, block0, block1, page, ofs);
+
+	if (block0 < DOC_LAYOUT_BLOCK_FIRST_DATA)
+		return 0;
+	if (block1 > docg3->max_block)
+		return -EINVAL;
+
+	is_good = docg3->bbt[block0 >> 3] & (1 << (block0 & 0x7));
+	return !is_good;
+}
+
+#if 0
+/**
+ * doc_get_erase_count - Get block erase count
+ * @docg3: the device
+ * @from: the offset in which the block is.
+ *
+ * Get the number of times a block was erased. The number is the maximum of
+ * erase times between first and second plane (which should be equal normally).
+ *
+ * Returns The number of erases, or -EINVAL or -EIO on error.
+ */
+static int doc_get_erase_count(struct docg3 *docg3, loff_t from)
+{
+	u8 buf[DOC_LAYOUT_WEAR_SIZE];
+	int ret, plane1_erase_count, plane2_erase_count;
+	int block0, block1, page, ofs;
+
+	doc_dbg("doc_get_erase_count(from=%lld, buf=%p)\n", from, buf);
+	if (from % DOC_LAYOUT_PAGE_SIZE)
+		return -EINVAL;
+	calc_block_sector(from, &block0, &block1, &page, &ofs, docg3->reliable);
+	if (block1 > docg3->max_block)
+		return -EINVAL;
+
+	ret = doc_reset_seq(docg3);
+	if (!ret)
+		ret = doc_read_page_prepare(docg3, block0, block1, page,
+					    ofs + DOC_LAYOUT_WEAR_OFFSET, 0);
+	if (!ret)
+		ret = doc_read_page_getbytes(docg3, DOC_LAYOUT_WEAR_SIZE,
+					     buf, 1, 0);
+	doc_read_page_finish(docg3);
+
+	if (ret || (buf[0] != DOC_ERASE_MARK) || (buf[2] != DOC_ERASE_MARK))
+		return -EIO;
+	plane1_erase_count = (u8)(~buf[1]) | ((u8)(~buf[4]) << 8)
+		| ((u8)(~buf[5]) << 16);
+	plane2_erase_count = (u8)(~buf[3]) | ((u8)(~buf[6]) << 8)
+		| ((u8)(~buf[7]) << 16);
+
+	return max(plane1_erase_count, plane2_erase_count);
+}
+#endif
+
+/**
+ * doc_get_op_status - get erase/write operation status
+ * @docg3: the device
+ *
+ * Queries the status from the chip, and returns it
+ *
+ * Returns the status (bits DOC_PLANES_STATUS_*)
+ */
+static int doc_get_op_status(struct docg3 *docg3)
+{
+	u8 status;
+
+	doc_flash_sequence(docg3, DOC_SEQ_PLANES_STATUS);
+	doc_flash_command(docg3, DOC_CMD_PLANES_STATUS);
+	doc_delay(docg3, 5);
+
+	doc_ecc_disable(docg3);
+	doc_read_data_area(docg3, &status, 1, 1);
+	return status;
+}
+
+/**
+ * doc_write_erase_wait_status - wait for write or erase completion
+ * @docg3: the device
+ *
+ * Wait for the chip to be ready again after erase or write operation, and check
+ * erase/write status.
+ *
+ * Returns 0 if erase successful, -EIO if erase/write issue, -ETIMEOUT if
+ * timeout
+ */
+static int doc_write_erase_wait_status(struct docg3 *docg3)
+{
+	int i, status, ret = 0;
+
+	for (i = 0; !doc_is_ready(docg3) && i < 5; i++)
+		msleep(20);
+	if (!doc_is_ready(docg3)) {
+		doc_dbg("Timeout reached and the chip is still not ready\n");
+		ret = -EAGAIN;
+		goto out;
+	}
+
+	status = doc_get_op_status(docg3);
+	if (status & DOC_PLANES_STATUS_FAIL) {
+		doc_dbg("Erase/Write failed on (a) plane(s), status = %x\n",
+			status);
+		ret = -EIO;
+	}
+
+out:
+	doc_page_finish(docg3);
+	return ret;
+}
+
+/**
+ * doc_erase_block - Erase a couple of blocks
+ * @docg3: the device
+ * @block0: the first block to erase (leftmost plane)
+ * @block1: the second block to erase (rightmost plane)
+ *
+ * Erase both blocks, and return operation status
+ *
+ * Returns 0 if erase successful, -EIO if erase issue, -ETIMEOUT if chip not
+ * ready for too long
+ */
+static int doc_erase_block(struct docg3 *docg3, int block0, int block1)
+{
+	int ret, sector;
+
+	doc_dbg("doc_erase_block(blocks=(%d,%d))\n", block0, block1);
+	ret = doc_reset_seq(docg3);
+	if (ret)
+		return -EIO;
+
+	doc_set_reliable_mode(docg3);
+	doc_flash_sequence(docg3, DOC_SEQ_ERASE);
+
+	sector = block0 << DOC_ADDR_BLOCK_SHIFT;
+	doc_flash_command(docg3, DOC_CMD_PROG_BLOCK_ADDR);
+	doc_setup_addr_sector(docg3, sector);
+	sector = block1 << DOC_ADDR_BLOCK_SHIFT;
+	doc_flash_command(docg3, DOC_CMD_PROG_BLOCK_ADDR);
+	doc_setup_addr_sector(docg3, sector);
+	doc_delay(docg3, 1);
+
+	doc_flash_command(docg3, DOC_CMD_ERASECYCLE2);
+	doc_delay(docg3, 2);
+
+	if (is_prot_seq_error(docg3)) {
+		doc_err("Erase blocks %d,%d error\n", block0, block1);
+		return -EIO;
+	}
+
+	return doc_write_erase_wait_status(docg3);
+}
+
+/**
+ * doc_erase - Erase a portion of the chip
+ * @mtd: the device
+ * @info: the erase info
+ *
+ * Erase a bunch of contiguous blocks, by pairs, as a "mtd" page of 1024 is
+ * split into 2 pages of 512 bytes on 2 contiguous blocks.
+ *
+ * Returns 0 if erase successful, -EINVAL if addressing error, -EIO if erase
+ * issue
+ */
+static int doc_erase(struct mtd_info *mtd, struct erase_info *info)
+{
+	struct docg3 *docg3 = mtd->priv;
+	uint64_t len;
+	int block0, block1, page, ret, ofs = 0;
+
+	doc_dbg("doc_erase(from=%lld, len=%lld\n", info->addr, info->len);
+
+	info->state = MTD_ERASE_PENDING;
+	calc_block_sector(info->addr + info->len, &block0, &block1, &page,
+			  &ofs, docg3->reliable);
+	ret = -EINVAL;
+	if (info->addr + info->len > mtd->size || page || ofs)
+		goto reset_err;
+
+	ret = 0;
+	calc_block_sector(info->addr, &block0, &block1, &page, &ofs,
+			  docg3->reliable);
+	mutex_lock(&docg3->cascade->lock);
+	doc_set_device_id(docg3, docg3->device_id);
+	doc_set_reliable_mode(docg3);
+	for (len = info->len; !ret && len > 0; len -= mtd->erasesize) {
+		info->state = MTD_ERASING;
+		ret = doc_erase_block(docg3, block0, block1);
+		block0 += 2;
+		block1 += 2;
+	}
+	mutex_unlock(&docg3->cascade->lock);
+
+	if (ret)
+		goto reset_err;
+
+	info->state = MTD_ERASE_DONE;
+	return 0;
+
+reset_err:
+	info->state = MTD_ERASE_FAILED;
+	return ret;
+}
+
+/**
+ * doc_write_page - Write a single page to the chip
+ * @docg3: the device
+ * @to: the offset from first block and first page, in bytes, aligned on page
+ *      size
+ * @buf: buffer to get bytes from
+ * @oob: buffer to get out of band bytes from (can be NULL if no OOB should be
+ *       written)
+ * @autoecc: if 0, all 16 bytes from OOB are taken, regardless of HW Hamming or
+ *           BCH computations. If 1, only bytes 0-7 and byte 15 are taken,
+ *           remaining ones are filled with hardware Hamming and BCH
+ *           computations. Its value is not meaningfull is oob == NULL.
+ *
+ * Write one full page (ie. 1 page split on two planes), of 512 bytes, with the
+ * OOB data. The OOB ECC is automatically computed by the hardware Hamming and
+ * BCH generator if autoecc is not null.
+ *
+ * Returns 0 if write successful, -EIO if write error, -EAGAIN if timeout
+ */
+static int doc_write_page(struct docg3 *docg3, loff_t to, const u_char *buf,
+			  const u_char *oob, int autoecc)
+{
+	int block0, block1, page, ret, ofs = 0;
+	u8 hwecc[DOC_ECC_BCH_SIZE], hamming;
+
+	doc_dbg("doc_write_page(to=%lld)\n", to);
+	calc_block_sector(to, &block0, &block1, &page, &ofs, docg3->reliable);
+
+	doc_set_device_id(docg3, docg3->device_id);
+	ret = doc_reset_seq(docg3);
+	if (ret)
+		goto err;
+
+	/* Program the flash address block and page */
+	ret = doc_write_seek(docg3, block0, block1, page, ofs);
+	if (ret)
+		goto err;
+
+	doc_write_page_ecc_init(docg3, DOC_ECC_BCH_TOTAL_BYTES);
+	doc_delay(docg3, 2);
+	doc_write_page_putbytes(docg3, DOC_LAYOUT_PAGE_SIZE, buf);
+
+	if (oob && autoecc) {
+		doc_write_page_putbytes(docg3, DOC_LAYOUT_OOB_PAGEINFO_SZ, oob);
+		doc_delay(docg3, 2);
+		oob += DOC_LAYOUT_OOB_UNUSED_OFS;
+
+		hamming = doc_register_readb(docg3, DOC_HAMMINGPARITY);
+		doc_delay(docg3, 2);
+		doc_write_page_putbytes(docg3, DOC_LAYOUT_OOB_HAMMING_SZ,
+					&hamming);
+		doc_delay(docg3, 2);
+
+		doc_get_bch_hw_ecc(docg3, hwecc);
+		doc_write_page_putbytes(docg3, DOC_LAYOUT_OOB_BCH_SZ, hwecc);
+		doc_delay(docg3, 2);
+
+		doc_write_page_putbytes(docg3, DOC_LAYOUT_OOB_UNUSED_SZ, oob);
+	}
+	if (oob && !autoecc)
+		doc_write_page_putbytes(docg3, DOC_LAYOUT_OOB_SIZE, oob);
+
+	doc_delay(docg3, 2);
+	doc_page_finish(docg3);
+	doc_delay(docg3, 2);
+	doc_flash_command(docg3, DOC_CMD_PROG_CYCLE2);
+	doc_delay(docg3, 2);
+
+	/*
+	 * The wait status will perform another doc_page_finish() call, but that
+	 * seems to please the docg3, so leave it.
+	 */
+	ret = doc_write_erase_wait_status(docg3);
+	return ret;
+err:
+	doc_read_page_finish(docg3);
+	return ret;
+}
+
+/**
+ * doc_guess_autoecc - Guess autoecc mode from mbd_oob_ops
+ * @ops: the oob operations
+ *
+ * Returns 0 or 1 if success, -EINVAL if invalid oob mode
+ */
+static int doc_guess_autoecc(struct mtd_oob_ops *ops)
+{
+	int autoecc;
+
+	switch (ops->mode) {
+	case MTD_OPS_PLACE_OOB:
+	case MTD_OPS_AUTO_OOB:
+		autoecc = 1;
+		break;
+	case MTD_OPS_RAW:
+		autoecc = 0;
+		break;
+	default:
+		autoecc = -EINVAL;
+	}
+	return autoecc;
+}
+
+/**
+ * doc_fill_autooob - Fill a 16 bytes OOB from 8 non-ECC bytes
+ * @dst: the target 16 bytes OOB buffer
+ * @oobsrc: the source 8 bytes non-ECC OOB buffer
+ *
+ */
+static void doc_fill_autooob(u8 *dst, u8 *oobsrc)
+{
+	memcpy(dst, oobsrc, DOC_LAYOUT_OOB_PAGEINFO_SZ);
+	dst[DOC_LAYOUT_OOB_UNUSED_OFS] = oobsrc[DOC_LAYOUT_OOB_PAGEINFO_SZ];
+}
+
+/**
+ * doc_backup_oob - Backup OOB into docg3 structure
+ * @docg3: the device
+ * @to: the page offset in the chip
+ * @ops: the OOB size and buffer
+ *
+ * As the docg3 should write a page with its OOB in one pass, and some userland
+ * applications do write_oob() to setup the OOB and then write(), store the OOB
+ * into a temporary storage. This is very dangerous, as 2 concurrent
+ * applications could store an OOB, and then write their pages (which will
+ * result into one having its OOB corrupted).
+ *
+ * The only reliable way would be for userland to call doc_write_oob() with both
+ * the page data _and_ the OOB area.
+ *
+ * Returns 0 if success, -EINVAL if ops content invalid
+ */
+static int doc_backup_oob(struct docg3 *docg3, loff_t to,
+			  struct mtd_oob_ops *ops)
+{
+	int ooblen = ops->ooblen, autoecc;
+
+	if (ooblen != DOC_LAYOUT_OOB_SIZE)
+		return -EINVAL;
+	autoecc = doc_guess_autoecc(ops);
+	if (autoecc < 0)
+		return autoecc;
+
+	docg3->oob_write_ofs = to;
+	docg3->oob_autoecc = autoecc;
+	if (ops->mode == MTD_OPS_AUTO_OOB) {
+		doc_fill_autooob(docg3->oob_write_buf, ops->oobbuf);
+		ops->oobretlen = 8;
+	} else {
+		memcpy(docg3->oob_write_buf, ops->oobbuf, DOC_LAYOUT_OOB_SIZE);
+		ops->oobretlen = DOC_LAYOUT_OOB_SIZE;
+	}
+	return 0;
+}
+
+/**
+ * doc_write_oob - Write out of band bytes to flash
+ * @mtd: the device
+ * @ofs: the offset from first block and first page, in bytes, aligned on page
+ *       size
+ * @ops: the mtd oob structure
+ *
+ * Either write OOB data into a temporary buffer, for the subsequent write
+ * page. The provided OOB should be 16 bytes long. If a data buffer is provided
+ * as well, issue the page write.
+ * Or provide data without OOB, and then a all zeroed OOB will be used (ECC will
+ * still be filled in if asked for).
+ *
+ * Returns 0 is successful, EINVAL if length is not 14 bytes
+ */
+static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
+			 struct mtd_oob_ops *ops)
+{
+	struct docg3 *docg3 = mtd->priv;
+	int ret, autoecc, oobdelta;
+	u8 *oobbuf = ops->oobbuf;
+	u8 *buf = ops->datbuf;
+	size_t len, ooblen;
+	u8 oob[DOC_LAYOUT_OOB_SIZE];
+
+	if (buf)
+		len = ops->len;
+	else
+		len = 0;
+	if (oobbuf)
+		ooblen = ops->ooblen;
+	else
+		ooblen = 0;
+
+	if (oobbuf && ops->mode == MTD_OPS_PLACE_OOB)
+		oobbuf += ops->ooboffs;
+
+	doc_dbg("doc_write_oob(from=%lld, mode=%d, data=(%p:%zu), oob=(%p:%zu))\n",
+		ofs, ops->mode, buf, len, oobbuf, ooblen);
+	switch (ops->mode) {
+	case MTD_OPS_PLACE_OOB:
+	case MTD_OPS_RAW:
+		oobdelta = mtd->oobsize;
+		break;
+	case MTD_OPS_AUTO_OOB:
+		oobdelta = mtd->ecclayout->oobavail;
+		break;
+	default:
+		return -EINVAL;
+	}
+	if ((len % DOC_LAYOUT_PAGE_SIZE) || (ooblen % oobdelta) ||
+	    (ofs % DOC_LAYOUT_PAGE_SIZE))
+		return -EINVAL;
+	if (len && ooblen &&
+	    (len / DOC_LAYOUT_PAGE_SIZE) != (ooblen / oobdelta))
+		return -EINVAL;
+	if (ofs + len > mtd->size)
+		return -EINVAL;
+
+	ops->oobretlen = 0;
+	ops->retlen = 0;
+	ret = 0;
+	if (len == 0 && ooblen == 0)
+		return -EINVAL;
+	if (len == 0 && ooblen > 0)
+		return doc_backup_oob(docg3, ofs, ops);
+
+	autoecc = doc_guess_autoecc(ops);
+	if (autoecc < 0)
+		return autoecc;
+
+	mutex_lock(&docg3->cascade->lock);
+	while (!ret && len > 0) {
+		memset(oob, 0, sizeof(oob));
+		if (ofs == docg3->oob_write_ofs)
+			memcpy(oob, docg3->oob_write_buf, DOC_LAYOUT_OOB_SIZE);
+		else if (ooblen > 0 && ops->mode == MTD_OPS_AUTO_OOB)
+			doc_fill_autooob(oob, oobbuf);
+		else if (ooblen > 0)
+			memcpy(oob, oobbuf, DOC_LAYOUT_OOB_SIZE);
+		ret = doc_write_page(docg3, ofs, buf, oob, autoecc);
+
+		ofs += DOC_LAYOUT_PAGE_SIZE;
+		len -= DOC_LAYOUT_PAGE_SIZE;
+		buf += DOC_LAYOUT_PAGE_SIZE;
+		if (ooblen) {
+			oobbuf += oobdelta;
+			ooblen -= oobdelta;
+			ops->oobretlen += oobdelta;
+		}
+		ops->retlen += DOC_LAYOUT_PAGE_SIZE;
+	}
+
+	doc_set_device_id(docg3, 0);
+	mutex_unlock(&docg3->cascade->lock);
+	return ret;
+}
+
+/**
+ * doc_write - Write a buffer to the chip
+ * @mtd: the device
+ * @to: the offset from first block and first page, in bytes, aligned on page
+ *      size
+ * @len: the number of bytes to write (must be a full page size, ie. 512)
+ * @retlen: the number of bytes actually written (0 or 512)
+ * @buf: the buffer to get bytes from
+ *
+ * Writes data to the chip.
+ *
+ * Returns 0 if write successful, -EIO if write error
+ */
+static int doc_write(struct mtd_info *mtd, loff_t to, size_t len,
+		     size_t *retlen, const u_char *buf)
+{
+	struct docg3 *docg3 = mtd->priv;
+	int ret;
+	struct mtd_oob_ops ops;
+
+	doc_dbg("doc_write(to=%lld, len=%zu)\n", to, len);
+	ops.datbuf = (char *)buf;
+	ops.len = len;
+	ops.mode = MTD_OPS_PLACE_OOB;
+	ops.oobbuf = NULL;
+	ops.ooblen = 0;
+	ops.ooboffs = 0;
+
+	ret = doc_write_oob(mtd, to, &ops);
+	*retlen = ops.retlen;
+	return ret;
+}
+
+static struct docg3 *sysfs_dev2docg3(struct device *dev,
+				     struct device_attribute *attr)
+{
+	int floor;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct mtd_info **docg3_floors = platform_get_drvdata(pdev);
+
+	floor = attr->attr.name[1] - '0';
+	if (floor < 0 || floor >= DOC_MAX_NBFLOORS)
+		return NULL;
+	else
+		return docg3_floors[floor]->priv;
+}
+
+static ssize_t dps0_is_key_locked(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct docg3 *docg3 = sysfs_dev2docg3(dev, attr);
+	int dps0;
+
+	mutex_lock(&docg3->cascade->lock);
+	doc_set_device_id(docg3, docg3->device_id);
+	dps0 = doc_register_readb(docg3, DOC_DPS0_STATUS);
+	doc_set_device_id(docg3, 0);
+	mutex_unlock(&docg3->cascade->lock);
+
+	return sprintf(buf, "%d\n", !(dps0 & DOC_DPS_KEY_OK));
+}
+
+static ssize_t dps1_is_key_locked(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct docg3 *docg3 = sysfs_dev2docg3(dev, attr);
+	int dps1;
+
+	mutex_lock(&docg3->cascade->lock);
+	doc_set_device_id(docg3, docg3->device_id);
+	dps1 = doc_register_readb(docg3, DOC_DPS1_STATUS);
+	doc_set_device_id(docg3, 0);
+	mutex_unlock(&docg3->cascade->lock);
+
+	return sprintf(buf, "%d\n", !(dps1 & DOC_DPS_KEY_OK));
+}
+
+static ssize_t dps0_insert_key(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t count)
+{
+	struct docg3 *docg3 = sysfs_dev2docg3(dev, attr);
+	int i;
+
+	if (count != DOC_LAYOUT_DPS_KEY_LENGTH)
+		return -EINVAL;
+
+	mutex_lock(&docg3->cascade->lock);
+	doc_set_device_id(docg3, docg3->device_id);
+	for (i = 0; i < DOC_LAYOUT_DPS_KEY_LENGTH; i++)
+		doc_writeb(docg3, buf[i], DOC_DPS0_KEY);
+	doc_set_device_id(docg3, 0);
+	mutex_unlock(&docg3->cascade->lock);
+	return count;
+}
+
+static ssize_t dps1_insert_key(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t count)
+{
+	struct docg3 *docg3 = sysfs_dev2docg3(dev, attr);
+	int i;
+
+	if (count != DOC_LAYOUT_DPS_KEY_LENGTH)
+		return -EINVAL;
+
+	mutex_lock(&docg3->cascade->lock);
+	doc_set_device_id(docg3, docg3->device_id);
+	for (i = 0; i < DOC_LAYOUT_DPS_KEY_LENGTH; i++)
+		doc_writeb(docg3, buf[i], DOC_DPS1_KEY);
+	doc_set_device_id(docg3, 0);
+	mutex_unlock(&docg3->cascade->lock);
+	return count;
+}
+
+#define FLOOR_SYSFS(id) { \
+	__ATTR(f##id##_dps0_is_keylocked, S_IRUGO, dps0_is_key_locked, NULL), \
+	__ATTR(f##id##_dps1_is_keylocked, S_IRUGO, dps1_is_key_locked, NULL), \
+	__ATTR(f##id##_dps0_protection_key, S_IWUSR|S_IWGRP, NULL, dps0_insert_key), \
+	__ATTR(f##id##_dps1_protection_key, S_IWUSR|S_IWGRP, NULL, dps1_insert_key), \
+}
+
+static struct device_attribute doc_sys_attrs[DOC_MAX_NBFLOORS][4] = {
+	FLOOR_SYSFS(0), FLOOR_SYSFS(1), FLOOR_SYSFS(2), FLOOR_SYSFS(3)
+};
+
+static int doc_register_sysfs(struct platform_device *pdev,
+			      struct docg3_cascade *cascade)
+{
+	int ret = 0, floor, i = 0;
+	struct device *dev = &pdev->dev;
+
+	for (floor = 0; !ret && floor < DOC_MAX_NBFLOORS &&
+		     cascade->floors[floor]; floor++)
+		for (i = 0; !ret && i < 4; i++)
+			ret = device_create_file(dev, &doc_sys_attrs[floor][i]);
+	if (!ret)
+		return 0;
+	do {
+		while (--i >= 0)
+			device_remove_file(dev, &doc_sys_attrs[floor][i]);
+		i = 4;
+	} while (--floor >= 0);
+	return ret;
+}
+
+static void doc_unregister_sysfs(struct platform_device *pdev,
+				 struct docg3_cascade *cascade)
+{
+	struct device *dev = &pdev->dev;
+	int floor, i;
+
+	for (floor = 0; floor < DOC_MAX_NBFLOORS && cascade->floors[floor];
+	     floor++)
+		for (i = 0; i < 4; i++)
+			device_remove_file(dev, &doc_sys_attrs[floor][i]);
+}
+
+/*
+ * Debug sysfs entries
+ */
+static int dbg_flashctrl_show(struct seq_file *s, void *p)
+{
+	struct docg3 *docg3 = (struct docg3 *)s->private;
+
+	int pos = 0;
+	u8 fctrl;
+
+	mutex_lock(&docg3->cascade->lock);
+	fctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+	mutex_unlock(&docg3->cascade->lock);
+
+	pos += seq_printf(s,
+		 "FlashControl : 0x%02x (%s,CE# %s,%s,%s,flash %s)\n",
+		 fctrl,
+		 fctrl & DOC_CTRL_VIOLATION ? "protocol violation" : "-",
+		 fctrl & DOC_CTRL_CE ? "active" : "inactive",
+		 fctrl & DOC_CTRL_PROTECTION_ERROR ? "protection error" : "-",
+		 fctrl & DOC_CTRL_SEQUENCE_ERROR ? "sequence error" : "-",
+		 fctrl & DOC_CTRL_FLASHREADY ? "ready" : "not ready");
+	return pos;
+}
+DEBUGFS_RO_ATTR(flashcontrol, dbg_flashctrl_show);
+
+static int dbg_asicmode_show(struct seq_file *s, void *p)
+{
+	struct docg3 *docg3 = (struct docg3 *)s->private;
+
+	int pos = 0, pctrl, mode;
+
+	mutex_lock(&docg3->cascade->lock);
+	pctrl = doc_register_readb(docg3, DOC_ASICMODE);
+	mode = pctrl & 0x03;
+	mutex_unlock(&docg3->cascade->lock);
+
+	pos += seq_printf(s,
+			 "%04x : RAM_WE=%d,RSTIN_RESET=%d,BDETCT_RESET=%d,WRITE_ENABLE=%d,POWERDOWN=%d,MODE=%d%d (",
+			 pctrl,
+			 pctrl & DOC_ASICMODE_RAM_WE ? 1 : 0,
+			 pctrl & DOC_ASICMODE_RSTIN_RESET ? 1 : 0,
+			 pctrl & DOC_ASICMODE_BDETCT_RESET ? 1 : 0,
+			 pctrl & DOC_ASICMODE_MDWREN ? 1 : 0,
+			 pctrl & DOC_ASICMODE_POWERDOWN ? 1 : 0,
+			 mode >> 1, mode & 0x1);
+
+	switch (mode) {
+	case DOC_ASICMODE_RESET:
+		pos += seq_printf(s, "reset");
+		break;
+	case DOC_ASICMODE_NORMAL:
+		pos += seq_printf(s, "normal");
+		break;
+	case DOC_ASICMODE_POWERDOWN:
+		pos += seq_printf(s, "powerdown");
+		break;
+	}
+	pos += seq_printf(s, ")\n");
+	return pos;
+}
+DEBUGFS_RO_ATTR(asic_mode, dbg_asicmode_show);
+
+static int dbg_device_id_show(struct seq_file *s, void *p)
+{
+	struct docg3 *docg3 = (struct docg3 *)s->private;
+	int pos = 0;
+	int id;
+
+	mutex_lock(&docg3->cascade->lock);
+	id = doc_register_readb(docg3, DOC_DEVICESELECT);
+	mutex_unlock(&docg3->cascade->lock);
+
+	pos += seq_printf(s, "DeviceId = %d\n", id);
+	return pos;
+}
+DEBUGFS_RO_ATTR(device_id, dbg_device_id_show);
+
+static int dbg_protection_show(struct seq_file *s, void *p)
+{
+	struct docg3 *docg3 = (struct docg3 *)s->private;
+	int pos = 0;
+	int protect, dps0, dps0_low, dps0_high, dps1, dps1_low, dps1_high;
+
+	mutex_lock(&docg3->cascade->lock);
+	protect = doc_register_readb(docg3, DOC_PROTECTION);
+	dps0 = doc_register_readb(docg3, DOC_DPS0_STATUS);
+	dps0_low = doc_register_readw(docg3, DOC_DPS0_ADDRLOW);
+	dps0_high = doc_register_readw(docg3, DOC_DPS0_ADDRHIGH);
+	dps1 = doc_register_readb(docg3, DOC_DPS1_STATUS);
+	dps1_low = doc_register_readw(docg3, DOC_DPS1_ADDRLOW);
+	dps1_high = doc_register_readw(docg3, DOC_DPS1_ADDRHIGH);
+	mutex_unlock(&docg3->cascade->lock);
+
+	pos += seq_printf(s, "Protection = 0x%02x (",
+			 protect);
+	if (protect & DOC_PROTECT_FOUNDRY_OTP_LOCK)
+		pos += seq_printf(s, "FOUNDRY_OTP_LOCK,");
+	if (protect & DOC_PROTECT_CUSTOMER_OTP_LOCK)
+		pos += seq_printf(s, "CUSTOMER_OTP_LOCK,");
+	if (protect & DOC_PROTECT_LOCK_INPUT)
+		pos += seq_printf(s, "LOCK_INPUT,");
+	if (protect & DOC_PROTECT_STICKY_LOCK)
+		pos += seq_printf(s, "STICKY_LOCK,");
+	if (protect & DOC_PROTECT_PROTECTION_ENABLED)
+		pos += seq_printf(s, "PROTECTION ON,");
+	if (protect & DOC_PROTECT_IPL_DOWNLOAD_LOCK)
+		pos += seq_printf(s, "IPL_DOWNLOAD_LOCK,");
+	if (protect & DOC_PROTECT_PROTECTION_ERROR)
+		pos += seq_printf(s, "PROTECT_ERR,");
+	else
+		pos += seq_printf(s, "NO_PROTECT_ERR");
+	pos += seq_printf(s, ")\n");
+
+	pos += seq_printf(s, "DPS0 = 0x%02x : "
+			 "Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, "
+			 "WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n",
+			 dps0, dps0_low, dps0_high,
+			 !!(dps0 & DOC_DPS_OTP_PROTECTED),
+			 !!(dps0 & DOC_DPS_READ_PROTECTED),
+			 !!(dps0 & DOC_DPS_WRITE_PROTECTED),
+			 !!(dps0 & DOC_DPS_HW_LOCK_ENABLED),
+			 !!(dps0 & DOC_DPS_KEY_OK));
+	pos += seq_printf(s, "DPS1 = 0x%02x : "
+			 "Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, "
+			 "WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n",
+			 dps1, dps1_low, dps1_high,
+			 !!(dps1 & DOC_DPS_OTP_PROTECTED),
+			 !!(dps1 & DOC_DPS_READ_PROTECTED),
+			 !!(dps1 & DOC_DPS_WRITE_PROTECTED),
+			 !!(dps1 & DOC_DPS_HW_LOCK_ENABLED),
+			 !!(dps1 & DOC_DPS_KEY_OK));
+	return pos;
+}
+DEBUGFS_RO_ATTR(protection, dbg_protection_show);
+
+static int __init doc_dbg_register(struct docg3 *docg3)
+{
+	struct dentry *root, *entry;
+
+	root = debugfs_create_dir("docg3", NULL);
+	if (!root)
+		return -ENOMEM;
+
+	entry = debugfs_create_file("flashcontrol", S_IRUSR, root, docg3,
+				  &flashcontrol_fops);
+	if (entry)
+		entry = debugfs_create_file("asic_mode", S_IRUSR, root,
+					    docg3, &asic_mode_fops);
+	if (entry)
+		entry = debugfs_create_file("device_id", S_IRUSR, root,
+					    docg3, &device_id_fops);
+	if (entry)
+		entry = debugfs_create_file("protection", S_IRUSR, root,
+					    docg3, &protection_fops);
+	if (entry) {
+		docg3->debugfs_root = root;
+		return 0;
+	} else {
+		debugfs_remove_recursive(root);
+		return -ENOMEM;
+	}
+}
+
+static void __exit doc_dbg_unregister(struct docg3 *docg3)
+{
+	debugfs_remove_recursive(docg3->debugfs_root);
+}
+
+/**
+ * doc_set_driver_info - Fill the mtd_info structure and docg3 structure
+ * @chip_id: The chip ID of the supported chip
+ * @mtd: The structure to fill
+ */
+static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd)
+{
+	struct docg3 *docg3 = mtd->priv;
+	int cfg;
+
+	cfg = doc_register_readb(docg3, DOC_CONFIGURATION);
+	docg3->if_cfg = (cfg & DOC_CONF_IF_CFG ? 1 : 0);
+	docg3->reliable = reliable_mode;
+
+	switch (chip_id) {
+	case DOC_CHIPID_G3:
+		mtd->name = kasprintf(GFP_KERNEL, "docg3.%d",
+				      docg3->device_id);
+		docg3->max_block = 2047;
+		break;
+	}
+	mtd->type = MTD_NANDFLASH;
+	mtd->flags = MTD_CAP_NANDFLASH;
+	mtd->size = (docg3->max_block + 1) * DOC_LAYOUT_BLOCK_SIZE;
+	if (docg3->reliable == 2)
+		mtd->size /= 2;
+	mtd->erasesize = DOC_LAYOUT_BLOCK_SIZE * DOC_LAYOUT_NBPLANES;
+	if (docg3->reliable == 2)
+		mtd->erasesize /= 2;
+	mtd->writebufsize = mtd->writesize = DOC_LAYOUT_PAGE_SIZE;
+	mtd->oobsize = DOC_LAYOUT_OOB_SIZE;
+	mtd->owner = THIS_MODULE;
+	mtd->_erase = doc_erase;
+	mtd->_read = doc_read;
+	mtd->_write = doc_write;
+	mtd->_read_oob = doc_read_oob;
+	mtd->_write_oob = doc_write_oob;
+	mtd->_block_isbad = doc_block_isbad;
+	mtd->ecclayout = &docg3_oobinfo;
+	mtd->ecc_strength = DOC_ECC_BCH_T;
+}
+
+/**
+ * doc_probe_device - Check if a device is available
+ * @base: the io space where the device is probed
+ * @floor: the floor of the probed device
+ * @dev: the device
+ * @cascade: the cascade of chips this devices will belong to
+ *
+ * Checks whether a device at the specified IO range, and floor is available.
+ *
+ * Returns a mtd_info struct if there is a device, ENODEV if none found, ENOMEM
+ * if a memory allocation failed. If floor 0 is checked, a reset of the ASIC is
+ * launched.
+ */
+static struct mtd_info * __init
+doc_probe_device(struct docg3_cascade *cascade, int floor, struct device *dev)
+{
+	int ret, bbt_nbpages;
+	u16 chip_id, chip_id_inv;
+	struct docg3 *docg3;
+	struct mtd_info *mtd;
+
+	ret = -ENOMEM;
+	docg3 = kzalloc(sizeof(struct docg3), GFP_KERNEL);
+	if (!docg3)
+		goto nomem1;
+	mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
+	if (!mtd)
+		goto nomem2;
+	mtd->priv = docg3;
+	bbt_nbpages = DIV_ROUND_UP(docg3->max_block + 1,
+				   8 * DOC_LAYOUT_PAGE_SIZE);
+	docg3->bbt = kzalloc(bbt_nbpages * DOC_LAYOUT_PAGE_SIZE, GFP_KERNEL);
+	if (!docg3->bbt)
+		goto nomem3;
+
+	docg3->dev = dev;
+	docg3->device_id = floor;
+	docg3->cascade = cascade;
+	doc_set_device_id(docg3, docg3->device_id);
+	if (!floor)
+		doc_set_asic_mode(docg3, DOC_ASICMODE_RESET);
+	doc_set_asic_mode(docg3, DOC_ASICMODE_NORMAL);
+
+	chip_id = doc_register_readw(docg3, DOC_CHIPID);
+	chip_id_inv = doc_register_readw(docg3, DOC_CHIPID_INV);
+
+	ret = 0;
+	if (chip_id != (u16)(~chip_id_inv)) {
+		goto nomem3;
+	}
+
+	switch (chip_id) {
+	case DOC_CHIPID_G3:
+		doc_info("Found a G3 DiskOnChip at addr %p, floor %d\n",
+			 docg3->cascade->base, floor);
+		break;
+	default:
+		doc_err("Chip id %04x is not a DiskOnChip G3 chip\n", chip_id);
+		goto nomem3;
+	}
+
+	doc_set_driver_info(chip_id, mtd);
+
+	doc_hamming_ecc_init(docg3, DOC_LAYOUT_OOB_PAGEINFO_SZ);
+	doc_reload_bbt(docg3);
+	return mtd;
+
+nomem3:
+	kfree(mtd);
+nomem2:
+	kfree(docg3);
+nomem1:
+	return ERR_PTR(ret);
+}
+
+/**
+ * doc_release_device - Release a docg3 floor
+ * @mtd: the device
+ */
+static void doc_release_device(struct mtd_info *mtd)
+{
+	struct docg3 *docg3 = mtd->priv;
+
+	mtd_device_unregister(mtd);
+	kfree(docg3->bbt);
+	kfree(docg3);
+	kfree(mtd->name);
+	kfree(mtd);
+}
+
+/**
+ * docg3_resume - Awakens docg3 floor
+ * @pdev: platfrom device
+ *
+ * Returns 0 (always successful)
+ */
+static int docg3_resume(struct platform_device *pdev)
+{
+	int i;
+	struct docg3_cascade *cascade;
+	struct mtd_info **docg3_floors, *mtd;
+	struct docg3 *docg3;
+
+	cascade = platform_get_drvdata(pdev);
+	docg3_floors = cascade->floors;
+	mtd = docg3_floors[0];
+	docg3 = mtd->priv;
+
+	doc_dbg("docg3_resume()\n");
+	for (i = 0; i < 12; i++)
+		doc_readb(docg3, DOC_IOSPACE_IPL);
+	return 0;
+}
+
+/**
+ * docg3_suspend - Put in low power mode the docg3 floor
+ * @pdev: platform device
+ * @state: power state
+ *
+ * Shuts off most of docg3 circuitery to lower power consumption.
+ *
+ * Returns 0 if suspend succeeded, -EIO if chip refused suspend
+ */
+static int docg3_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	int floor, i;
+	struct docg3_cascade *cascade;
+	struct mtd_info **docg3_floors, *mtd;
+	struct docg3 *docg3;
+	u8 ctrl, pwr_down;
+
+	cascade = platform_get_drvdata(pdev);
+	docg3_floors = cascade->floors;
+	for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++) {
+		mtd = docg3_floors[floor];
+		if (!mtd)
+			continue;
+		docg3 = mtd->priv;
+
+		doc_writeb(docg3, floor, DOC_DEVICESELECT);
+		ctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+		ctrl &= ~DOC_CTRL_VIOLATION & ~DOC_CTRL_CE;
+		doc_writeb(docg3, ctrl, DOC_FLASHCONTROL);
+
+		for (i = 0; i < 10; i++) {
+			usleep_range(3000, 4000);
+			pwr_down = doc_register_readb(docg3, DOC_POWERMODE);
+			if (pwr_down & DOC_POWERDOWN_READY)
+				break;
+		}
+		if (pwr_down & DOC_POWERDOWN_READY) {
+			doc_dbg("docg3_suspend(): floor %d powerdown ok\n",
+				floor);
+		} else {
+			doc_err("docg3_suspend(): floor %d powerdown failed\n",
+				floor);
+			return -EIO;
+		}
+	}
+
+	mtd = docg3_floors[0];
+	docg3 = mtd->priv;
+	doc_set_asic_mode(docg3, DOC_ASICMODE_POWERDOWN);
+	return 0;
+}
+
+/**
+ * doc_probe - Probe the IO space for a DiskOnChip G3 chip
+ * @pdev: platform device
+ *
+ * Probes for a G3 chip at the specified IO space in the platform data
+ * ressources. The floor 0 must be available.
+ *
+ * Returns 0 on success, -ENOMEM, -ENXIO on error
+ */
+static int __init docg3_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mtd_info *mtd;
+	struct resource *ress;
+	void __iomem *base;
+	int ret, floor, found = 0;
+	struct docg3_cascade *cascade;
+
+	ret = -ENXIO;
+	ress = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!ress) {
+		dev_err(dev, "No I/O memory resource defined\n");
+		return ret;
+	}
+	base = devm_ioremap(dev, ress->start, DOC_IOSPACE_SIZE);
+
+	ret = -ENOMEM;
+	cascade = devm_kzalloc(dev, sizeof(*cascade) * DOC_MAX_NBFLOORS,
+			       GFP_KERNEL);
+	if (!cascade)
+		return ret;
+	cascade->base = base;
+	mutex_init(&cascade->lock);
+	cascade->bch = init_bch(DOC_ECC_BCH_M, DOC_ECC_BCH_T,
+			     DOC_ECC_BCH_PRIMPOLY);
+	if (!cascade->bch)
+		return ret;
+
+	for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++) {
+		mtd = doc_probe_device(cascade, floor, dev);
+		if (IS_ERR(mtd)) {
+			ret = PTR_ERR(mtd);
+			goto err_probe;
+		}
+		if (!mtd) {
+			if (floor == 0)
+				goto notfound;
+			else
+				continue;
+		}
+		cascade->floors[floor] = mtd;
+		ret = mtd_device_parse_register(mtd, part_probes, NULL, NULL,
+						0);
+		if (ret)
+			goto err_probe;
+		found++;
+	}
+
+	ret = doc_register_sysfs(pdev, cascade);
+	if (ret)
+		goto err_probe;
+	if (!found)
+		goto notfound;
+
+	platform_set_drvdata(pdev, cascade);
+	doc_dbg_register(cascade->floors[0]->priv);
+	return 0;
+
+notfound:
+	ret = -ENODEV;
+	dev_info(dev, "No supported DiskOnChip found\n");
+err_probe:
+	free_bch(cascade->bch);
+	for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++)
+		if (cascade->floors[floor])
+			doc_release_device(cascade->floors[floor]);
+	return ret;
+}
+
+/**
+ * docg3_release - Release the driver
+ * @pdev: the platform device
+ *
+ * Returns 0
+ */
+static int __exit docg3_release(struct platform_device *pdev)
+{
+	struct docg3_cascade *cascade = platform_get_drvdata(pdev);
+	struct docg3 *docg3 = cascade->floors[0]->priv;
+	int floor;
+
+	doc_unregister_sysfs(pdev, cascade);
+	doc_dbg_unregister(docg3);
+	for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++)
+		if (cascade->floors[floor])
+			doc_release_device(cascade->floors[floor]);
+
+	free_bch(docg3->cascade->bch);
+	return 0;
+}
+
+static struct platform_driver g3_driver = {
+	.driver		= {
+		.name	= "docg3",
+		.owner	= THIS_MODULE,
+	},
+	.suspend	= docg3_suspend,
+	.resume		= docg3_resume,
+	.remove		= __exit_p(docg3_release),
+};
+
+module_platform_driver_probe(g3_driver, docg3_probe);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Robert Jarzmik <robert.jarzmik@free.fr>");
+MODULE_DESCRIPTION("MTD driver for DiskOnChip G3");
diff --git a/drivers/mtd/devices/docg3.h b/drivers/mtd/devices/docg3.h
new file mode 100644
index 00000000000..19fb93f96a3
--- /dev/null
+++ b/drivers/mtd/devices/docg3.h
@@ -0,0 +1,370 @@
+/*
+ * Handles the M-Systems DiskOnChip G3 chip
+ *
+ * Copyright (C) 2011 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef _MTD_DOCG3_H
+#define _MTD_DOCG3_H
+
+#include <linux/mtd/mtd.h>
+
+/*
+ * Flash memory areas :
+ *   - 0x0000 .. 0x07ff : IPL
+ *   - 0x0800 .. 0x0fff : Data area
+ *   - 0x1000 .. 0x17ff : Registers
+ *   - 0x1800 .. 0x1fff : Unknown
+ */
+#define DOC_IOSPACE_IPL			0x0000
+#define DOC_IOSPACE_DATA		0x0800
+#define DOC_IOSPACE_SIZE		0x2000
+
+/*
+ * DOC G3 layout and adressing scheme
+ *   A page address for the block "b", plane "P" and page "p":
+ *   address = [bbbb bPpp pppp]
+ */
+
+#define DOC_ADDR_PAGE_MASK		0x3f
+#define DOC_ADDR_BLOCK_SHIFT		6
+#define DOC_LAYOUT_NBPLANES		2
+#define DOC_LAYOUT_PAGES_PER_BLOCK	64
+#define DOC_LAYOUT_PAGE_SIZE		512
+#define DOC_LAYOUT_OOB_SIZE		16
+#define DOC_LAYOUT_WEAR_SIZE		8
+#define DOC_LAYOUT_PAGE_OOB_SIZE				\
+	(DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_SIZE)
+#define DOC_LAYOUT_WEAR_OFFSET		(DOC_LAYOUT_PAGE_OOB_SIZE * 2)
+#define DOC_LAYOUT_BLOCK_SIZE					\
+	(DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_PAGE_SIZE)
+
+/*
+ * ECC related constants
+ */
+#define DOC_ECC_BCH_M			14
+#define DOC_ECC_BCH_T			4
+#define DOC_ECC_BCH_PRIMPOLY		0x4443
+#define DOC_ECC_BCH_SIZE		7
+#define DOC_ECC_BCH_COVERED_BYTES				\
+	(DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_PAGEINFO_SZ +	\
+	 DOC_LAYOUT_OOB_HAMMING_SZ)
+#define DOC_ECC_BCH_TOTAL_BYTES					\
+	(DOC_ECC_BCH_COVERED_BYTES + DOC_LAYOUT_OOB_BCH_SZ)
+
+/*
+ * Blocks distribution
+ */
+#define DOC_LAYOUT_BLOCK_BBT		0
+#define DOC_LAYOUT_BLOCK_OTP		0
+#define DOC_LAYOUT_BLOCK_FIRST_DATA	6
+
+#define DOC_LAYOUT_PAGE_BBT		4
+
+/*
+ * Extra page OOB (16 bytes wide) layout
+ */
+#define DOC_LAYOUT_OOB_PAGEINFO_OFS	0
+#define DOC_LAYOUT_OOB_HAMMING_OFS	7
+#define DOC_LAYOUT_OOB_BCH_OFS		8
+#define DOC_LAYOUT_OOB_UNUSED_OFS	15
+#define DOC_LAYOUT_OOB_PAGEINFO_SZ	7
+#define DOC_LAYOUT_OOB_HAMMING_SZ	1
+#define DOC_LAYOUT_OOB_BCH_SZ		7
+#define DOC_LAYOUT_OOB_UNUSED_SZ	1
+
+
+#define DOC_CHIPID_G3			0x200
+#define DOC_ERASE_MARK			0xaa
+#define DOC_MAX_NBFLOORS		4
+/*
+ * Flash registers
+ */
+#define DOC_CHIPID			0x1000
+#define DOC_TEST			0x1004
+#define DOC_BUSLOCK			0x1006
+#define DOC_ENDIANCONTROL		0x1008
+#define DOC_DEVICESELECT		0x100a
+#define DOC_ASICMODE			0x100c
+#define DOC_CONFIGURATION		0x100e
+#define DOC_INTERRUPTCONTROL		0x1010
+#define DOC_READADDRESS			0x101a
+#define DOC_DATAEND			0x101e
+#define DOC_INTERRUPTSTATUS		0x1020
+
+#define DOC_FLASHSEQUENCE		0x1032
+#define DOC_FLASHCOMMAND		0x1034
+#define DOC_FLASHADDRESS		0x1036
+#define DOC_FLASHCONTROL		0x1038
+#define DOC_NOP				0x103e
+
+#define DOC_ECCCONF0			0x1040
+#define DOC_ECCCONF1			0x1042
+#define DOC_ECCPRESET			0x1044
+#define DOC_HAMMINGPARITY		0x1046
+#define DOC_BCH_HW_ECC(idx)		(0x1048 + idx)
+
+#define DOC_PROTECTION			0x1056
+#define DOC_DPS0_KEY			0x105c
+#define DOC_DPS1_KEY			0x105e
+#define DOC_DPS0_ADDRLOW		0x1060
+#define DOC_DPS0_ADDRHIGH		0x1062
+#define DOC_DPS1_ADDRLOW		0x1064
+#define DOC_DPS1_ADDRHIGH		0x1066
+#define DOC_DPS0_STATUS			0x106c
+#define DOC_DPS1_STATUS			0x106e
+
+#define DOC_ASICMODECONFIRM		0x1072
+#define DOC_CHIPID_INV			0x1074
+#define DOC_POWERMODE			0x107c
+
+/*
+ * Flash sequences
+ * A sequence is preset before one or more commands are input to the chip.
+ */
+#define DOC_SEQ_RESET			0x00
+#define DOC_SEQ_PAGE_SIZE_532		0x03
+#define DOC_SEQ_SET_FASTMODE		0x05
+#define DOC_SEQ_SET_RELIABLEMODE	0x09
+#define DOC_SEQ_READ			0x12
+#define DOC_SEQ_SET_PLANE1		0x0e
+#define DOC_SEQ_SET_PLANE2		0x10
+#define DOC_SEQ_PAGE_SETUP		0x1d
+#define DOC_SEQ_ERASE			0x27
+#define DOC_SEQ_PLANES_STATUS		0x31
+
+/*
+ * Flash commands
+ */
+#define DOC_CMD_READ_PLANE1		0x00
+#define DOC_CMD_SET_ADDR_READ		0x05
+#define DOC_CMD_READ_ALL_PLANES		0x30
+#define DOC_CMD_READ_PLANE2		0x50
+#define DOC_CMD_READ_FLASH		0xe0
+#define DOC_CMD_PAGE_SIZE_532		0x3c
+
+#define DOC_CMD_PROG_BLOCK_ADDR		0x60
+#define DOC_CMD_PROG_CYCLE1		0x80
+#define DOC_CMD_PROG_CYCLE2		0x10
+#define DOC_CMD_PROG_CYCLE3		0x11
+#define DOC_CMD_ERASECYCLE2		0xd0
+#define DOC_CMD_READ_STATUS		0x70
+#define DOC_CMD_PLANES_STATUS		0x71
+
+#define DOC_CMD_RELIABLE_MODE		0x22
+#define DOC_CMD_FAST_MODE		0xa2
+
+#define DOC_CMD_RESET			0xff
+
+/*
+ * Flash register : DOC_FLASHCONTROL
+ */
+#define DOC_CTRL_VIOLATION		0x20
+#define DOC_CTRL_CE			0x10
+#define DOC_CTRL_UNKNOWN_BITS		0x08
+#define DOC_CTRL_PROTECTION_ERROR	0x04
+#define DOC_CTRL_SEQUENCE_ERROR		0x02
+#define DOC_CTRL_FLASHREADY		0x01
+
+/*
+ * Flash register : DOC_ASICMODE
+ */
+#define DOC_ASICMODE_RESET		0x00
+#define DOC_ASICMODE_NORMAL		0x01
+#define DOC_ASICMODE_POWERDOWN		0x02
+#define DOC_ASICMODE_MDWREN		0x04
+#define DOC_ASICMODE_BDETCT_RESET	0x08
+#define DOC_ASICMODE_RSTIN_RESET	0x10
+#define DOC_ASICMODE_RAM_WE		0x20
+
+/*
+ * Flash register : DOC_ECCCONF0
+ */
+#define DOC_ECCCONF0_WRITE_MODE		0x0000
+#define DOC_ECCCONF0_READ_MODE		0x8000
+#define DOC_ECCCONF0_AUTO_ECC_ENABLE	0x4000
+#define DOC_ECCCONF0_HAMMING_ENABLE	0x1000
+#define DOC_ECCCONF0_BCH_ENABLE		0x0800
+#define DOC_ECCCONF0_DATA_BYTES_MASK	0x07ff
+
+/*
+ * Flash register : DOC_ECCCONF1
+ */
+#define DOC_ECCCONF1_BCH_SYNDROM_ERR	0x80
+#define DOC_ECCCONF1_UNKOWN1		0x40
+#define DOC_ECCCONF1_PAGE_IS_WRITTEN	0x20
+#define DOC_ECCCONF1_UNKOWN3		0x10
+#define DOC_ECCCONF1_HAMMING_BITS_MASK	0x0f
+
+/*
+ * Flash register : DOC_PROTECTION
+ */
+#define DOC_PROTECT_FOUNDRY_OTP_LOCK	0x01
+#define DOC_PROTECT_CUSTOMER_OTP_LOCK	0x02
+#define DOC_PROTECT_LOCK_INPUT		0x04
+#define DOC_PROTECT_STICKY_LOCK		0x08
+#define DOC_PROTECT_PROTECTION_ENABLED	0x10
+#define DOC_PROTECT_IPL_DOWNLOAD_LOCK	0x20
+#define DOC_PROTECT_PROTECTION_ERROR	0x80
+
+/*
+ * Flash register : DOC_DPS0_STATUS and DOC_DPS1_STATUS
+ */
+#define DOC_DPS_OTP_PROTECTED		0x01
+#define DOC_DPS_READ_PROTECTED		0x02
+#define DOC_DPS_WRITE_PROTECTED		0x04
+#define DOC_DPS_HW_LOCK_ENABLED		0x08
+#define DOC_DPS_KEY_OK			0x80
+
+/*
+ * Flash register : DOC_CONFIGURATION
+ */
+#define DOC_CONF_IF_CFG			0x80
+#define DOC_CONF_MAX_ID_MASK		0x30
+#define DOC_CONF_VCCQ_3V		0x01
+
+/*
+ * Flash register : DOC_READADDRESS
+ */
+#define DOC_READADDR_INC		0x8000
+#define DOC_READADDR_ONE_BYTE		0x4000
+#define DOC_READADDR_ADDR_MASK		0x1fff
+
+/*
+ * Flash register : DOC_POWERMODE
+ */
+#define DOC_POWERDOWN_READY		0x80
+
+/*
+ * Status of erase and write operation
+ */
+#define DOC_PLANES_STATUS_FAIL		0x01
+#define DOC_PLANES_STATUS_PLANE0_KO	0x02
+#define DOC_PLANES_STATUS_PLANE1_KO	0x04
+
+/*
+ * DPS key management
+ *
+ * Each floor of docg3 has 2 protection areas: DPS0 and DPS1. These areas span
+ * across block boundaries, and define whether these blocks can be read or
+ * written.
+ * The definition is dynamically stored in page 0 of blocks (2,3) for DPS0, and
+ * page 0 of blocks (4,5) for DPS1.
+ */
+#define DOC_LAYOUT_DPS_KEY_LENGTH	8
+
+/**
+ * struct docg3_cascade - Cascade of 1 to 4 docg3 chips
+ * @floors: floors (ie. one physical docg3 chip is one floor)
+ * @base: IO space to access all chips in the cascade
+ * @bch: the BCH correcting control structure
+ * @lock: lock to protect docg3 IO space from concurrent accesses
+ */
+struct docg3_cascade {
+	struct mtd_info *floors[DOC_MAX_NBFLOORS];
+	void __iomem *base;
+	struct bch_control *bch;
+	struct mutex lock;
+};
+
+/**
+ * struct docg3 - DiskOnChip driver private data
+ * @dev: the device currently under control
+ * @cascade: the cascade this device belongs to
+ * @device_id: number of the cascaded DoCG3 device (0, 1, 2 or 3)
+ * @if_cfg: if true, reads are on 16bits, else reads are on 8bits
+
+ * @reliable: if 0, docg3 in normal mode, if 1 docg3 in fast mode, if 2 in
+ *            reliable mode
+ *            Fast mode implies more errors than normal mode.
+ *            Reliable mode implies that page 2*n and 2*n+1 are clones.
+ * @bbt: bad block table cache
+ * @oob_write_ofs: offset of the MTD where this OOB should belong (ie. in next
+ *                 page_write)
+ * @oob_autoecc: if 1, use only bytes 0-7, 15, and fill the others with HW ECC
+ *               if 0, use all the 16 bytes.
+ * @oob_write_buf: prepared OOB for next page_write
+ * @debugfs_root: debugfs root node
+ */
+struct docg3 {
+	struct device *dev;
+	struct docg3_cascade *cascade;
+	unsigned int device_id:4;
+	unsigned int if_cfg:1;
+	unsigned int reliable:2;
+	int max_block;
+	u8 *bbt;
+	loff_t oob_write_ofs;
+	int oob_autoecc;
+	u8 oob_write_buf[DOC_LAYOUT_OOB_SIZE];
+	struct dentry *debugfs_root;
+};
+
+#define doc_err(fmt, arg...) dev_err(docg3->dev, (fmt), ## arg)
+#define doc_info(fmt, arg...) dev_info(docg3->dev, (fmt), ## arg)
+#define doc_dbg(fmt, arg...) dev_dbg(docg3->dev, (fmt), ## arg)
+#define doc_vdbg(fmt, arg...) dev_vdbg(docg3->dev, (fmt), ## arg)
+
+#define DEBUGFS_RO_ATTR(name, show_fct) \
+	static int name##_open(struct inode *inode, struct file *file) \
+	{ return single_open(file, show_fct, inode->i_private); }      \
+	static const struct file_operations name##_fops = { \
+		.owner = THIS_MODULE, \
+		.open = name##_open, \
+		.llseek = seq_lseek, \
+		.read = seq_read, \
+		.release = single_release \
+	};
+#endif
+
+/*
+ * Trace events part
+ */
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM docg3
+
+#if !defined(_MTD_DOCG3_TRACE) || defined(TRACE_HEADER_MULTI_READ)
+#define _MTD_DOCG3_TRACE
+
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(docg3_io,
+	    TP_PROTO(int op, int width, u16 reg, int val),
+	    TP_ARGS(op, width, reg, val),
+	    TP_STRUCT__entry(
+		    __field(int, op)
+		    __field(unsigned char, width)
+		    __field(u16, reg)
+		    __field(int, val)),
+	    TP_fast_assign(
+		    __entry->op = op;
+		    __entry->width = width;
+		    __entry->reg = reg;
+		    __entry->val = val;),
+	    TP_printk("docg3: %s%02d reg=%04x, val=%04x",
+		      __entry->op ? "write" : "read", __entry->width,
+		      __entry->reg, __entry->val)
+	);
+#endif
+
+/* This part must be outside protection */
+#undef TRACE_INCLUDE_PATH
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE docg3
+#include <trace/define_trace.h>
diff --git a/drivers/mtd/devices/docprobe.c b/drivers/mtd/devices/docprobe.c
deleted file mode 100644
index 6e62922942b..00000000000
--- a/drivers/mtd/devices/docprobe.c
+++ /dev/null
@@ -1,338 +0,0 @@
-
-/* Linux driver for Disk-On-Chip devices			*/
-/* Probe routines common to all DoC devices			*/
-/* (C) 1999 Machine Vision Holdings, Inc.			*/
-/* (C) 1999-2003 David Woodhouse <dwmw2@infradead.org>		*/
-
-
-/* DOC_PASSIVE_PROBE:
-   In order to ensure that the BIOS checksum is correct at boot time, and
-   hence that the onboard BIOS extension gets executed, the DiskOnChip
-   goes into reset mode when it is read sequentially: all registers
-   return 0xff until the chip is woken up again by writing to the
-   DOCControl register.
-
-   Unfortunately, this means that the probe for the DiskOnChip is unsafe,
-   because one of the first things it does is write to where it thinks
-   the DOCControl register should be - which may well be shared memory
-   for another device. I've had machines which lock up when this is
-   attempted. Hence the possibility to do a passive probe, which will fail
-   to detect a chip in reset mode, but is at least guaranteed not to lock
-   the machine.
-
-   If you have this problem, uncomment the following line:
-#define DOC_PASSIVE_PROBE
-*/
-
-
-/* DOC_SINGLE_DRIVER:
-   Millennium driver has been merged into DOC2000 driver.
-
-   The old Millennium-only driver has been retained just in case there
-   are problems with the new code. If the combined driver doesn't work
-   for you, you can try the old one by undefining DOC_SINGLE_DRIVER
-   below and also enabling it in your configuration. If this fixes the
-   problems, please send a report to the MTD mailing list at
-   <linux-mtd@lists.infradead.org>.
-*/
-#define DOC_SINGLE_DRIVER
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/errno.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/types.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/doc2000.h>
-#include <linux/mtd/compatmac.h>
-
-/* Where to look for the devices? */
-#ifndef CONFIG_MTD_DOCPROBE_ADDRESS
-#define CONFIG_MTD_DOCPROBE_ADDRESS 0
-#endif
-
-
-static unsigned long doc_config_location = CONFIG_MTD_DOCPROBE_ADDRESS;
-module_param(doc_config_location, ulong, 0);
-MODULE_PARM_DESC(doc_config_location, "Physical memory address at which to probe for DiskOnChip");
-
-static unsigned long __initdata doc_locations[] = {
-#if defined (__alpha__) || defined(__i386__) || defined(__x86_64__)
-#ifdef CONFIG_MTD_DOCPROBE_HIGH
-	0xfffc8000, 0xfffca000, 0xfffcc000, 0xfffce000,
-	0xfffd0000, 0xfffd2000, 0xfffd4000, 0xfffd6000,
-	0xfffd8000, 0xfffda000, 0xfffdc000, 0xfffde000,
-	0xfffe0000, 0xfffe2000, 0xfffe4000, 0xfffe6000,
-	0xfffe8000, 0xfffea000, 0xfffec000, 0xfffee000,
-#else /*  CONFIG_MTD_DOCPROBE_HIGH */
-	0xc8000, 0xca000, 0xcc000, 0xce000,
-	0xd0000, 0xd2000, 0xd4000, 0xd6000,
-	0xd8000, 0xda000, 0xdc000, 0xde000,
-	0xe0000, 0xe2000, 0xe4000, 0xe6000,
-	0xe8000, 0xea000, 0xec000, 0xee000,
-#endif /*  CONFIG_MTD_DOCPROBE_HIGH */
-#else
-#warning Unknown architecture for DiskOnChip. No default probe locations defined
-#endif
-	0xffffffff };
-
-/* doccheck: Probe a given memory window to see if there's a DiskOnChip present */
-
-static inline int __init doccheck(void __iomem *potential, unsigned long physadr)
-{
-	void __iomem *window=potential;
-	unsigned char tmp, tmpb, tmpc, ChipID;
-#ifndef DOC_PASSIVE_PROBE
-	unsigned char tmp2;
-#endif
-
-	/* Routine copied from the Linux DOC driver */
-
-#ifdef CONFIG_MTD_DOCPROBE_55AA
-	/* Check for 0x55 0xAA signature at beginning of window,
-	   this is no longer true once we remove the IPL (for Millennium */
-	if (ReadDOC(window, Sig1) != 0x55 || ReadDOC(window, Sig2) != 0xaa)
-		return 0;
-#endif /* CONFIG_MTD_DOCPROBE_55AA */
-
-#ifndef DOC_PASSIVE_PROBE
-	/* It's not possible to cleanly detect the DiskOnChip - the
-	 * bootup procedure will put the device into reset mode, and
-	 * it's not possible to talk to it without actually writing
-	 * to the DOCControl register. So we store the current contents
-	 * of the DOCControl register's location, in case we later decide
-	 * that it's not a DiskOnChip, and want to put it back how we
-	 * found it.
-	 */
-	tmp2 = ReadDOC(window, DOCControl);
-
-	/* Reset the DiskOnChip ASIC */
-	WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET,
-		 window, DOCControl);
-	WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET,
-		 window, DOCControl);
-
-	/* Enable the DiskOnChip ASIC */
-	WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL,
-		 window, DOCControl);
-	WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL,
-		 window, DOCControl);
-#endif /* !DOC_PASSIVE_PROBE */
-
-	/* We need to read the ChipID register four times. For some
-	   newer DiskOnChip 2000 units, the first three reads will
-	   return the DiskOnChip Millennium ident. Don't ask. */
-	ChipID = ReadDOC(window, ChipID);
-
-	switch (ChipID) {
-	case DOC_ChipID_Doc2k:
-		/* Check the TOGGLE bit in the ECC register */
-		tmp  = ReadDOC(window, 2k_ECCStatus) & DOC_TOGGLE_BIT;
-		tmpb = ReadDOC(window, 2k_ECCStatus) & DOC_TOGGLE_BIT;
-		tmpc = ReadDOC(window, 2k_ECCStatus) & DOC_TOGGLE_BIT;
-		if (tmp != tmpb && tmp == tmpc)
-				return ChipID;
-		break;
-
-	case DOC_ChipID_DocMil:
-		/* Check for the new 2000 with Millennium ASIC */
-		ReadDOC(window, ChipID);
-		ReadDOC(window, ChipID);
-		if (ReadDOC(window, ChipID) != DOC_ChipID_DocMil)
-			ChipID = DOC_ChipID_Doc2kTSOP;
-
-		/* Check the TOGGLE bit in the ECC register */
-		tmp  = ReadDOC(window, ECCConf) & DOC_TOGGLE_BIT;
-		tmpb = ReadDOC(window, ECCConf) & DOC_TOGGLE_BIT;
-		tmpc = ReadDOC(window, ECCConf) & DOC_TOGGLE_BIT;
-		if (tmp != tmpb && tmp == tmpc)
-				return ChipID;
-		break;
-
-	case DOC_ChipID_DocMilPlus16:
-	case DOC_ChipID_DocMilPlus32:
-	case 0:
-		/* Possible Millennium+, need to do more checks */
-#ifndef DOC_PASSIVE_PROBE
-		/* Possibly release from power down mode */
-		for (tmp = 0; (tmp < 4); tmp++)
-			ReadDOC(window, Mplus_Power);
-
-		/* Reset the DiskOnChip ASIC */
-		tmp = DOC_MODE_RESET | DOC_MODE_MDWREN | DOC_MODE_RST_LAT |
-			DOC_MODE_BDECT;
-		WriteDOC(tmp, window, Mplus_DOCControl);
-		WriteDOC(~tmp, window, Mplus_CtrlConfirm);
-
-		mdelay(1);
-		/* Enable the DiskOnChip ASIC */
-		tmp = DOC_MODE_NORMAL | DOC_MODE_MDWREN | DOC_MODE_RST_LAT |
-			DOC_MODE_BDECT;
-		WriteDOC(tmp, window, Mplus_DOCControl);
-		WriteDOC(~tmp, window, Mplus_CtrlConfirm);
-		mdelay(1);
-#endif /* !DOC_PASSIVE_PROBE */
-
-		ChipID = ReadDOC(window, ChipID);
-
-		switch (ChipID) {
-		case DOC_ChipID_DocMilPlus16:
-		case DOC_ChipID_DocMilPlus32:
-			/* Check the TOGGLE bit in the toggle register */
-			tmp  = ReadDOC(window, Mplus_Toggle) & DOC_TOGGLE_BIT;
-			tmpb = ReadDOC(window, Mplus_Toggle) & DOC_TOGGLE_BIT;
-			tmpc = ReadDOC(window, Mplus_Toggle) & DOC_TOGGLE_BIT;
-			if (tmp != tmpb && tmp == tmpc)
-					return ChipID;
-		default:
-			break;
-		}
-		/* FALL TRHU */
-
-	default:
-
-#ifdef CONFIG_MTD_DOCPROBE_55AA
-		printk(KERN_DEBUG "Possible DiskOnChip with unknown ChipID %2.2X found at 0x%lx\n",
-		       ChipID, physadr);
-#endif
-#ifndef DOC_PASSIVE_PROBE
-		/* Put back the contents of the DOCControl register, in case it's not
-		 * actually a DiskOnChip.
-		 */
-		WriteDOC(tmp2, window, DOCControl);
-#endif
-		return 0;
-	}
-
-	printk(KERN_WARNING "DiskOnChip failed TOGGLE test, dropping.\n");
-
-#ifndef DOC_PASSIVE_PROBE
-	/* Put back the contents of the DOCControl register: it's not a DiskOnChip */
-	WriteDOC(tmp2, window, DOCControl);
-#endif
-	return 0;
-}
-
-static int docfound;
-
-extern void DoC2k_init(struct mtd_info *);
-extern void DoCMil_init(struct mtd_info *);
-extern void DoCMilPlus_init(struct mtd_info *);
-
-static void __init DoC_Probe(unsigned long physadr)
-{
-	void __iomem *docptr;
-	struct DiskOnChip *this;
-	struct mtd_info *mtd;
-	int ChipID;
-	char namebuf[15];
-	char *name = namebuf;
-	void (*initroutine)(struct mtd_info *) = NULL;
-
-	docptr = ioremap(physadr, DOC_IOREMAP_LEN);
-
-	if (!docptr)
-		return;
-
-	if ((ChipID = doccheck(docptr, physadr))) {
-		if (ChipID == DOC_ChipID_Doc2kTSOP) {
-			/* Remove this at your own peril. The hardware driver works but nothing prevents you from erasing bad blocks */
-			printk(KERN_NOTICE "Refusing to drive DiskOnChip 2000 TSOP until Bad Block Table is correctly supported by INFTL\n");
-			iounmap(docptr);
-			return;
-		}
-		docfound = 1;
-		mtd = kmalloc(sizeof(struct DiskOnChip) + sizeof(struct mtd_info), GFP_KERNEL);
-
-		if (!mtd) {
-			printk(KERN_WARNING "Cannot allocate memory for data structures. Dropping.\n");
-			iounmap(docptr);
-			return;
-		}
-
-		this = (struct DiskOnChip *)(&mtd[1]);
-
-		memset((char *)mtd,0, sizeof(struct mtd_info));
-		memset((char *)this, 0, sizeof(struct DiskOnChip));
-
-		mtd->priv = this;
-		this->virtadr = docptr;
-		this->physadr = physadr;
-		this->ChipID = ChipID;
-		sprintf(namebuf, "with ChipID %2.2X", ChipID);
-
-		switch(ChipID) {
-		case DOC_ChipID_Doc2kTSOP:
-			name="2000 TSOP";
-			initroutine = symbol_request(DoC2k_init);
-			break;
-
-		case DOC_ChipID_Doc2k:
-			name="2000";
-			initroutine = symbol_request(DoC2k_init);
-			break;
-
-		case DOC_ChipID_DocMil:
-			name="Millennium";
-#ifdef DOC_SINGLE_DRIVER
-			initroutine = symbol_request(DoC2k_init);
-#else
-			initroutine = symbol_request(DoCMil_init);
-#endif /* DOC_SINGLE_DRIVER */
-			break;
-
-		case DOC_ChipID_DocMilPlus16:
-		case DOC_ChipID_DocMilPlus32:
-			name="MillenniumPlus";
-			initroutine = symbol_request(DoCMilPlus_init);
-			break;
-		}
-
-		if (initroutine) {
-			(*initroutine)(mtd);
-			symbol_put_addr(initroutine);
-			return;
-		}
-		printk(KERN_NOTICE "Cannot find driver for DiskOnChip %s at 0x%lX\n", name, physadr);
-		kfree(mtd);
-	}
-	iounmap(docptr);
-}
-
-
-/****************************************************************************
- *
- * Module stuff
- *
- ****************************************************************************/
-
-static int __init init_doc(void)
-{
-	int i;
-
-	if (doc_config_location) {
-		printk(KERN_INFO "Using configured DiskOnChip probe address 0x%lx\n", doc_config_location);
-		DoC_Probe(doc_config_location);
-	} else {
-		for (i=0; (doc_locations[i] != 0xffffffff); i++) {
-			DoC_Probe(doc_locations[i]);
-		}
-	}
-	/* No banner message any more. Print a message if no DiskOnChip
-	   found, so the user knows we at least tried. */
-	if (!docfound)
-		printk(KERN_INFO "No recognised DiskOnChip devices found\n");
-	return -EAGAIN;
-}
-
-module_init(init_doc);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
-MODULE_DESCRIPTION("Probe code for DiskOnChip 2000 and Millennium devices");
-
diff --git a/drivers/mtd/devices/elm.c b/drivers/mtd/devices/elm.c
new file mode 100644
index 00000000000..b4f61c7fc16
--- /dev/null
+++ b/drivers/mtd/devices/elm.c
@@ -0,0 +1,579 @@
+/*
+ * Error Location Module
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#define DRIVER_NAME	"omap-elm"
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/sched.h>
+#include <linux/pm_runtime.h>
+#include <linux/platform_data/elm.h>
+
+#define ELM_SYSCONFIG			0x010
+#define ELM_IRQSTATUS			0x018
+#define ELM_IRQENABLE			0x01c
+#define ELM_LOCATION_CONFIG		0x020
+#define ELM_PAGE_CTRL			0x080
+#define ELM_SYNDROME_FRAGMENT_0		0x400
+#define ELM_SYNDROME_FRAGMENT_1		0x404
+#define ELM_SYNDROME_FRAGMENT_2		0x408
+#define ELM_SYNDROME_FRAGMENT_3		0x40c
+#define ELM_SYNDROME_FRAGMENT_4		0x410
+#define ELM_SYNDROME_FRAGMENT_5		0x414
+#define ELM_SYNDROME_FRAGMENT_6		0x418
+#define ELM_LOCATION_STATUS		0x800
+#define ELM_ERROR_LOCATION_0		0x880
+
+/* ELM Interrupt Status Register */
+#define INTR_STATUS_PAGE_VALID		BIT(8)
+
+/* ELM Interrupt Enable Register */
+#define INTR_EN_PAGE_MASK		BIT(8)
+
+/* ELM Location Configuration Register */
+#define ECC_BCH_LEVEL_MASK		0x3
+
+/* ELM syndrome */
+#define ELM_SYNDROME_VALID		BIT(16)
+
+/* ELM_LOCATION_STATUS Register */
+#define ECC_CORRECTABLE_MASK		BIT(8)
+#define ECC_NB_ERRORS_MASK		0x1f
+
+/* ELM_ERROR_LOCATION_0-15 Registers */
+#define ECC_ERROR_LOCATION_MASK		0x1fff
+
+#define ELM_ECC_SIZE			0x7ff
+
+#define SYNDROME_FRAGMENT_REG_SIZE	0x40
+#define ERROR_LOCATION_SIZE		0x100
+
+struct elm_registers {
+	u32 elm_irqenable;
+	u32 elm_sysconfig;
+	u32 elm_location_config;
+	u32 elm_page_ctrl;
+	u32 elm_syndrome_fragment_6[ERROR_VECTOR_MAX];
+	u32 elm_syndrome_fragment_5[ERROR_VECTOR_MAX];
+	u32 elm_syndrome_fragment_4[ERROR_VECTOR_MAX];
+	u32 elm_syndrome_fragment_3[ERROR_VECTOR_MAX];
+	u32 elm_syndrome_fragment_2[ERROR_VECTOR_MAX];
+	u32 elm_syndrome_fragment_1[ERROR_VECTOR_MAX];
+	u32 elm_syndrome_fragment_0[ERROR_VECTOR_MAX];
+};
+
+struct elm_info {
+	struct device *dev;
+	void __iomem *elm_base;
+	struct completion elm_completion;
+	struct list_head list;
+	enum bch_ecc bch_type;
+	struct elm_registers elm_regs;
+	int ecc_steps;
+	int ecc_syndrome_size;
+};
+
+static LIST_HEAD(elm_devices);
+
+static void elm_write_reg(struct elm_info *info, int offset, u32 val)
+{
+	writel(val, info->elm_base + offset);
+}
+
+static u32 elm_read_reg(struct elm_info *info, int offset)
+{
+	return readl(info->elm_base + offset);
+}
+
+/**
+ * elm_config - Configure ELM module
+ * @dev:	ELM device
+ * @bch_type:	Type of BCH ecc
+ */
+int elm_config(struct device *dev, enum bch_ecc bch_type,
+	int ecc_steps, int ecc_step_size, int ecc_syndrome_size)
+{
+	u32 reg_val;
+	struct elm_info *info = dev_get_drvdata(dev);
+
+	if (!info) {
+		dev_err(dev, "Unable to configure elm - device not probed?\n");
+		return -ENODEV;
+	}
+	/* ELM cannot detect ECC errors for chunks > 1KB */
+	if (ecc_step_size > ((ELM_ECC_SIZE + 1) / 2)) {
+		dev_err(dev, "unsupported config ecc-size=%d\n", ecc_step_size);
+		return -EINVAL;
+	}
+	/* ELM support 8 error syndrome process */
+	if (ecc_steps > ERROR_VECTOR_MAX) {
+		dev_err(dev, "unsupported config ecc-step=%d\n", ecc_steps);
+		return -EINVAL;
+	}
+
+	reg_val = (bch_type & ECC_BCH_LEVEL_MASK) | (ELM_ECC_SIZE << 16);
+	elm_write_reg(info, ELM_LOCATION_CONFIG, reg_val);
+	info->bch_type		= bch_type;
+	info->ecc_steps		= ecc_steps;
+	info->ecc_syndrome_size	= ecc_syndrome_size;
+
+	return 0;
+}
+EXPORT_SYMBOL(elm_config);
+
+/**
+ * elm_configure_page_mode - Enable/Disable page mode
+ * @info:	elm info
+ * @index:	index number of syndrome fragment vector
+ * @enable:	enable/disable flag for page mode
+ *
+ * Enable page mode for syndrome fragment index
+ */
+static void elm_configure_page_mode(struct elm_info *info, int index,
+		bool enable)
+{
+	u32 reg_val;
+
+	reg_val = elm_read_reg(info, ELM_PAGE_CTRL);
+	if (enable)
+		reg_val |= BIT(index);	/* enable page mode */
+	else
+		reg_val &= ~BIT(index);	/* disable page mode */
+
+	elm_write_reg(info, ELM_PAGE_CTRL, reg_val);
+}
+
+/**
+ * elm_load_syndrome - Load ELM syndrome reg
+ * @info:	elm info
+ * @err_vec:	elm error vectors
+ * @ecc:	buffer with calculated ecc
+ *
+ * Load syndrome fragment registers with calculated ecc in reverse order.
+ */
+static void elm_load_syndrome(struct elm_info *info,
+		struct elm_errorvec *err_vec, u8 *ecc)
+{
+	int i, offset;
+	u32 val;
+
+	for (i = 0; i < info->ecc_steps; i++) {
+
+		/* Check error reported */
+		if (err_vec[i].error_reported) {
+			elm_configure_page_mode(info, i, true);
+			offset = ELM_SYNDROME_FRAGMENT_0 +
+				SYNDROME_FRAGMENT_REG_SIZE * i;
+			switch (info->bch_type) {
+			case BCH8_ECC:
+				/* syndrome fragment 0 = ecc[9-12B] */
+				val = cpu_to_be32(*(u32 *) &ecc[9]);
+				elm_write_reg(info, offset, val);
+
+				/* syndrome fragment 1 = ecc[5-8B] */
+				offset += 4;
+				val = cpu_to_be32(*(u32 *) &ecc[5]);
+				elm_write_reg(info, offset, val);
+
+				/* syndrome fragment 2 = ecc[1-4B] */
+				offset += 4;
+				val = cpu_to_be32(*(u32 *) &ecc[1]);
+				elm_write_reg(info, offset, val);
+
+				/* syndrome fragment 3 = ecc[0B] */
+				offset += 4;
+				val = ecc[0];
+				elm_write_reg(info, offset, val);
+				break;
+			case BCH4_ECC:
+				/* syndrome fragment 0 = ecc[20-52b] bits */
+				val = (cpu_to_be32(*(u32 *) &ecc[3]) >> 4) |
+					((ecc[2] & 0xf) << 28);
+				elm_write_reg(info, offset, val);
+
+				/* syndrome fragment 1 = ecc[0-20b] bits */
+				offset += 4;
+				val = cpu_to_be32(*(u32 *) &ecc[0]) >> 12;
+				elm_write_reg(info, offset, val);
+				break;
+			case BCH16_ECC:
+				val = cpu_to_be32(*(u32 *) &ecc[22]);
+				elm_write_reg(info, offset, val);
+				offset += 4;
+				val = cpu_to_be32(*(u32 *) &ecc[18]);
+				elm_write_reg(info, offset, val);
+				offset += 4;
+				val = cpu_to_be32(*(u32 *) &ecc[14]);
+				elm_write_reg(info, offset, val);
+				offset += 4;
+				val = cpu_to_be32(*(u32 *) &ecc[10]);
+				elm_write_reg(info, offset, val);
+				offset += 4;
+				val = cpu_to_be32(*(u32 *) &ecc[6]);
+				elm_write_reg(info, offset, val);
+				offset += 4;
+				val = cpu_to_be32(*(u32 *) &ecc[2]);
+				elm_write_reg(info, offset, val);
+				offset += 4;
+				val = cpu_to_be32(*(u32 *) &ecc[0]) >> 16;
+				elm_write_reg(info, offset, val);
+				break;
+			default:
+				pr_err("invalid config bch_type\n");
+			}
+		}
+
+		/* Update ecc pointer with ecc byte size */
+		ecc += info->ecc_syndrome_size;
+	}
+}
+
+/**
+ * elm_start_processing - start elm syndrome processing
+ * @info:	elm info
+ * @err_vec:	elm error vectors
+ *
+ * Set syndrome valid bit for syndrome fragment registers for which
+ * elm syndrome fragment registers are loaded. This enables elm module
+ * to start processing syndrome vectors.
+ */
+static void elm_start_processing(struct elm_info *info,
+		struct elm_errorvec *err_vec)
+{
+	int i, offset;
+	u32 reg_val;
+
+	/*
+	 * Set syndrome vector valid, so that ELM module
+	 * will process it for vectors error is reported
+	 */
+	for (i = 0; i < info->ecc_steps; i++) {
+		if (err_vec[i].error_reported) {
+			offset = ELM_SYNDROME_FRAGMENT_6 +
+				SYNDROME_FRAGMENT_REG_SIZE * i;
+			reg_val = elm_read_reg(info, offset);
+			reg_val |= ELM_SYNDROME_VALID;
+			elm_write_reg(info, offset, reg_val);
+		}
+	}
+}
+
+/**
+ * elm_error_correction - locate correctable error position
+ * @info:	elm info
+ * @err_vec:	elm error vectors
+ *
+ * On completion of processing by elm module, error location status
+ * register updated with correctable/uncorrectable error information.
+ * In case of correctable errors, number of errors located from
+ * elm location status register & read the positions from
+ * elm error location register.
+ */
+static void elm_error_correction(struct elm_info *info,
+		struct elm_errorvec *err_vec)
+{
+	int i, j, errors = 0;
+	int offset;
+	u32 reg_val;
+
+	for (i = 0; i < info->ecc_steps; i++) {
+
+		/* Check error reported */
+		if (err_vec[i].error_reported) {
+			offset = ELM_LOCATION_STATUS + ERROR_LOCATION_SIZE * i;
+			reg_val = elm_read_reg(info, offset);
+
+			/* Check correctable error or not */
+			if (reg_val & ECC_CORRECTABLE_MASK) {
+				offset = ELM_ERROR_LOCATION_0 +
+					ERROR_LOCATION_SIZE * i;
+
+				/* Read count of correctable errors */
+				err_vec[i].error_count = reg_val &
+					ECC_NB_ERRORS_MASK;
+
+				/* Update the error locations in error vector */
+				for (j = 0; j < err_vec[i].error_count; j++) {
+
+					reg_val = elm_read_reg(info, offset);
+					err_vec[i].error_loc[j] = reg_val &
+						ECC_ERROR_LOCATION_MASK;
+
+					/* Update error location register */
+					offset += 4;
+				}
+
+				errors += err_vec[i].error_count;
+			} else {
+				err_vec[i].error_uncorrectable = true;
+			}
+
+			/* Clearing interrupts for processed error vectors */
+			elm_write_reg(info, ELM_IRQSTATUS, BIT(i));
+
+			/* Disable page mode */
+			elm_configure_page_mode(info, i, false);
+		}
+	}
+}
+
+/**
+ * elm_decode_bch_error_page - Locate error position
+ * @dev:	device pointer
+ * @ecc_calc:	calculated ECC bytes from GPMC
+ * @err_vec:	elm error vectors
+ *
+ * Called with one or more error reported vectors & vectors with
+ * error reported is updated in err_vec[].error_reported
+ */
+void elm_decode_bch_error_page(struct device *dev, u8 *ecc_calc,
+		struct elm_errorvec *err_vec)
+{
+	struct elm_info *info = dev_get_drvdata(dev);
+	u32 reg_val;
+
+	/* Enable page mode interrupt */
+	reg_val = elm_read_reg(info, ELM_IRQSTATUS);
+	elm_write_reg(info, ELM_IRQSTATUS, reg_val & INTR_STATUS_PAGE_VALID);
+	elm_write_reg(info, ELM_IRQENABLE, INTR_EN_PAGE_MASK);
+
+	/* Load valid ecc byte to syndrome fragment register */
+	elm_load_syndrome(info, err_vec, ecc_calc);
+
+	/* Enable syndrome processing for which syndrome fragment is updated */
+	elm_start_processing(info, err_vec);
+
+	/* Wait for ELM module to finish locating error correction */
+	wait_for_completion(&info->elm_completion);
+
+	/* Disable page mode interrupt */
+	reg_val = elm_read_reg(info, ELM_IRQENABLE);
+	elm_write_reg(info, ELM_IRQENABLE, reg_val & ~INTR_EN_PAGE_MASK);
+	elm_error_correction(info, err_vec);
+}
+EXPORT_SYMBOL(elm_decode_bch_error_page);
+
+static irqreturn_t elm_isr(int this_irq, void *dev_id)
+{
+	u32 reg_val;
+	struct elm_info *info = dev_id;
+
+	reg_val = elm_read_reg(info, ELM_IRQSTATUS);
+
+	/* All error vectors processed */
+	if (reg_val & INTR_STATUS_PAGE_VALID) {
+		elm_write_reg(info, ELM_IRQSTATUS,
+				reg_val & INTR_STATUS_PAGE_VALID);
+		complete(&info->elm_completion);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+static int elm_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct resource *res, *irq;
+	struct elm_info *info;
+
+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->dev = &pdev->dev;
+
+	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!irq) {
+		dev_err(&pdev->dev, "no irq resource defined\n");
+		return -ENODEV;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	info->elm_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(info->elm_base))
+		return PTR_ERR(info->elm_base);
+
+	ret = devm_request_irq(&pdev->dev, irq->start, elm_isr, 0,
+			pdev->name, info);
+	if (ret) {
+		dev_err(&pdev->dev, "failure requesting irq %i\n", irq->start);
+		return ret;
+	}
+
+	pm_runtime_enable(&pdev->dev);
+	if (pm_runtime_get_sync(&pdev->dev) < 0) {
+		ret = -EINVAL;
+		pm_runtime_disable(&pdev->dev);
+		dev_err(&pdev->dev, "can't enable clock\n");
+		return ret;
+	}
+
+	init_completion(&info->elm_completion);
+	INIT_LIST_HEAD(&info->list);
+	list_add(&info->list, &elm_devices);
+	platform_set_drvdata(pdev, info);
+	return ret;
+}
+
+static int elm_remove(struct platform_device *pdev)
+{
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+/**
+ * elm_context_save
+ * saves ELM configurations to preserve them across Hardware powered-down
+ */
+static int elm_context_save(struct elm_info *info)
+{
+	struct elm_registers *regs = &info->elm_regs;
+	enum bch_ecc bch_type = info->bch_type;
+	u32 offset = 0, i;
+
+	regs->elm_irqenable       = elm_read_reg(info, ELM_IRQENABLE);
+	regs->elm_sysconfig       = elm_read_reg(info, ELM_SYSCONFIG);
+	regs->elm_location_config = elm_read_reg(info, ELM_LOCATION_CONFIG);
+	regs->elm_page_ctrl       = elm_read_reg(info, ELM_PAGE_CTRL);
+	for (i = 0; i < ERROR_VECTOR_MAX; i++) {
+		offset = i * SYNDROME_FRAGMENT_REG_SIZE;
+		switch (bch_type) {
+		case BCH16_ECC:
+			regs->elm_syndrome_fragment_6[i] = elm_read_reg(info,
+					ELM_SYNDROME_FRAGMENT_6 + offset);
+			regs->elm_syndrome_fragment_5[i] = elm_read_reg(info,
+					ELM_SYNDROME_FRAGMENT_5 + offset);
+			regs->elm_syndrome_fragment_4[i] = elm_read_reg(info,
+					ELM_SYNDROME_FRAGMENT_4 + offset);
+		case BCH8_ECC:
+			regs->elm_syndrome_fragment_3[i] = elm_read_reg(info,
+					ELM_SYNDROME_FRAGMENT_3 + offset);
+			regs->elm_syndrome_fragment_2[i] = elm_read_reg(info,
+					ELM_SYNDROME_FRAGMENT_2 + offset);
+		case BCH4_ECC:
+			regs->elm_syndrome_fragment_1[i] = elm_read_reg(info,
+					ELM_SYNDROME_FRAGMENT_1 + offset);
+			regs->elm_syndrome_fragment_0[i] = elm_read_reg(info,
+					ELM_SYNDROME_FRAGMENT_0 + offset);
+			break;
+		default:
+			return -EINVAL;
+		}
+		/* ELM SYNDROME_VALID bit in SYNDROME_FRAGMENT_6[] needs
+		 * to be saved for all BCH schemes*/
+		regs->elm_syndrome_fragment_6[i] = elm_read_reg(info,
+					ELM_SYNDROME_FRAGMENT_6 + offset);
+	}
+	return 0;
+}
+
+/**
+ * elm_context_restore
+ * writes configurations saved duing power-down back into ELM registers
+ */
+static int elm_context_restore(struct elm_info *info)
+{
+	struct elm_registers *regs = &info->elm_regs;
+	enum bch_ecc bch_type = info->bch_type;
+	u32 offset = 0, i;
+
+	elm_write_reg(info, ELM_IRQENABLE,	 regs->elm_irqenable);
+	elm_write_reg(info, ELM_SYSCONFIG,	 regs->elm_sysconfig);
+	elm_write_reg(info, ELM_LOCATION_CONFIG, regs->elm_location_config);
+	elm_write_reg(info, ELM_PAGE_CTRL,	 regs->elm_page_ctrl);
+	for (i = 0; i < ERROR_VECTOR_MAX; i++) {
+		offset = i * SYNDROME_FRAGMENT_REG_SIZE;
+		switch (bch_type) {
+		case BCH16_ECC:
+			elm_write_reg(info, ELM_SYNDROME_FRAGMENT_6 + offset,
+					regs->elm_syndrome_fragment_6[i]);
+			elm_write_reg(info, ELM_SYNDROME_FRAGMENT_5 + offset,
+					regs->elm_syndrome_fragment_5[i]);
+			elm_write_reg(info, ELM_SYNDROME_FRAGMENT_4 + offset,
+					regs->elm_syndrome_fragment_4[i]);
+		case BCH8_ECC:
+			elm_write_reg(info, ELM_SYNDROME_FRAGMENT_3 + offset,
+					regs->elm_syndrome_fragment_3[i]);
+			elm_write_reg(info, ELM_SYNDROME_FRAGMENT_2 + offset,
+					regs->elm_syndrome_fragment_2[i]);
+		case BCH4_ECC:
+			elm_write_reg(info, ELM_SYNDROME_FRAGMENT_1 + offset,
+					regs->elm_syndrome_fragment_1[i]);
+			elm_write_reg(info, ELM_SYNDROME_FRAGMENT_0 + offset,
+					regs->elm_syndrome_fragment_0[i]);
+			break;
+		default:
+			return -EINVAL;
+		}
+		/* ELM_SYNDROME_VALID bit to be set in last to trigger FSM */
+		elm_write_reg(info, ELM_SYNDROME_FRAGMENT_6 + offset,
+					regs->elm_syndrome_fragment_6[i] &
+							 ELM_SYNDROME_VALID);
+	}
+	return 0;
+}
+
+static int elm_suspend(struct device *dev)
+{
+	struct elm_info *info = dev_get_drvdata(dev);
+	elm_context_save(info);
+	pm_runtime_put_sync(dev);
+	return 0;
+}
+
+static int elm_resume(struct device *dev)
+{
+	struct elm_info *info = dev_get_drvdata(dev);
+	pm_runtime_get_sync(dev);
+	elm_context_restore(info);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(elm_pm_ops, elm_suspend, elm_resume);
+
+#ifdef CONFIG_OF
+static const struct of_device_id elm_of_match[] = {
+	{ .compatible = "ti,am3352-elm" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, elm_of_match);
+#endif
+
+static struct platform_driver elm_driver = {
+	.driver	= {
+		.name	= DRIVER_NAME,
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(elm_of_match),
+		.pm	= &elm_pm_ops,
+	},
+	.probe	= elm_probe,
+	.remove	= elm_remove,
+};
+
+module_platform_driver(elm_driver);
+
+MODULE_DESCRIPTION("ELM driver for BCH error correction");
+MODULE_AUTHOR("Texas Instruments");
+MODULE_ALIAS("platform: elm");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c
index f4359fe7150..82bd00af5cc 100644
--- a/drivers/mtd/devices/lart.c
+++ b/drivers/mtd/devices/lart.c
@@ -17,7 +17,7 @@
  *           - January 2000
  *
  *    [2] MTD internal API documentation
- *           - http://www.linux-mtd.infradead.org/tech/
+ *           - http://www.linux-mtd.infradead.org/ 
  *
  * Limitations:
  *
@@ -34,9 +34,6 @@
 /* debugging */
 //#define LART_DEBUG
 
-/* partition support */
-#define HAVE_PARTITIONS
-
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/types.h>
@@ -44,9 +41,7 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mtd/mtd.h>
-#ifdef HAVE_PARTITIONS
 #include <linux/mtd/partitions.h>
-#endif
 
 #ifndef CONFIG_SA1100_LART
 #error This is for LART architecture only
@@ -353,7 +348,7 @@ static inline int erase_block (__u32 offset)
    /* put the flash back into command mode */
    write32 (DATA_TO_FLASH (READ_ARRAY),offset);
 
-   /* was the erase successfull? */
+   /* was the erase successful? */
    if ((status & STATUS_ERASE_ERR))
 	 {
 		printk (KERN_WARNING "%s: erase error at address 0x%.8x.\n",module_name,offset);
@@ -372,9 +367,6 @@ static int flash_erase (struct mtd_info *mtd,struct erase_info *instr)
    printk (KERN_DEBUG "%s(addr = 0x%.8x, len = %d)\n", __func__, instr->addr, instr->len);
 #endif
 
-   /* sanity checks */
-   if (instr->addr + instr->len > mtd->size) return (-EINVAL);
-
    /*
 	* check that both start and end of the requested erase are
 	* aligned with the erasesize at the appropriate addresses.
@@ -445,10 +437,6 @@ static int flash_read (struct mtd_info *mtd,loff_t from,size_t len,size_t *retle
    printk (KERN_DEBUG "%s(from = 0x%.8x, len = %d)\n", __func__, (__u32)from, len);
 #endif
 
-   /* sanity checks */
-   if (!len) return (0);
-   if (from + len > mtd->size) return (-EINVAL);
-
    /* we always read len bytes */
    *retlen = len;
 
@@ -508,7 +496,7 @@ static inline int write_dword (__u32 offset,__u32 x)
    /* put the flash back into command mode */
    write32 (DATA_TO_FLASH (READ_ARRAY),offset);
 
-   /* was the write successfull? */
+   /* was the write successful? */
    if ((status & STATUS_PGM_ERR) || read32 (offset) != x)
 	 {
 		printk (KERN_WARNING "%s: write error at address 0x%.8x.\n",module_name,offset);
@@ -527,11 +515,8 @@ static int flash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen
    printk (KERN_DEBUG "%s(to = 0x%.8x, len = %d)\n", __func__, (__u32)to, len);
 #endif
 
-   *retlen = 0;
-
    /* sanity checks */
    if (!len) return (0);
-   if (to + len > mtd->size) return (-EINVAL);
 
    /* first, we write a 0xFF.... padded byte until we reach a dword boundary */
    if (to & (BUSWIDTH - 1))
@@ -598,7 +583,6 @@ static struct mtd_erase_region_info erase_regions[] = {
 	}
 };
 
-#ifdef HAVE_PARTITIONS
 static struct mtd_partition lart_partitions[] = {
 	/* blob */
 	{
@@ -619,7 +603,7 @@ static struct mtd_partition lart_partitions[] = {
 		.size	= INITRD_LEN,		/* MTDPART_SIZ_FULL */
 	}
 };
-#endif
+#define NUM_PARTITIONS ARRAY_SIZE(lart_partitions)
 
 static int __init lart_flash_init (void)
 {
@@ -636,14 +620,15 @@ static int __init lart_flash_init (void)
    mtd.name = module_name;
    mtd.type = MTD_NORFLASH;
    mtd.writesize = 1;
+   mtd.writebufsize = 4;
    mtd.flags = MTD_CAP_NORFLASH;
    mtd.size = FLASH_BLOCKSIZE_PARAM * FLASH_NUMBLOCKS_16m_PARAM + FLASH_BLOCKSIZE_MAIN * FLASH_NUMBLOCKS_16m_MAIN;
    mtd.erasesize = FLASH_BLOCKSIZE_MAIN;
    mtd.numeraseregions = ARRAY_SIZE(erase_regions);
    mtd.eraseregions = erase_regions;
-   mtd.erase = flash_erase;
-   mtd.read = flash_read;
-   mtd.write = flash_write;
+   mtd._erase = flash_erase;
+   mtd._read = flash_read;
+   mtd._write = flash_write;
    mtd.owner = THIS_MODULE;
 
 #ifdef LART_DEBUG
@@ -668,7 +653,6 @@ static int __init lart_flash_init (void)
 			   result,mtd.eraseregions[result].erasesize,mtd.eraseregions[result].erasesize / 1024,
 			   result,mtd.eraseregions[result].numblocks);
 
-#ifdef HAVE_PARTITIONS
    printk ("\npartitions = %d\n", ARRAY_SIZE(lart_partitions));
 
    for (result = 0; result < ARRAY_SIZE(lart_partitions); result++)
@@ -681,24 +665,16 @@ static int __init lart_flash_init (void)
 			 result,lart_partitions[result].offset,
 			 result,lart_partitions[result].size,lart_partitions[result].size / 1024);
 #endif
-#endif
 
-#ifndef HAVE_PARTITIONS
-   result = add_mtd_device (&mtd);
-#else
-   result = add_mtd_partitions (&mtd,lart_partitions, ARRAY_SIZE(lart_partitions));
-#endif
+   result = mtd_device_register(&mtd, lart_partitions,
+                                ARRAY_SIZE(lart_partitions));
 
    return (result);
 }
 
 static void __exit lart_flash_exit (void)
 {
-#ifndef HAVE_PARTITIONS
-   del_mtd_device (&mtd);
-#else
-   del_mtd_partitions (&mtd);
-#endif
+   mtd_device_unregister(&mtd);
 }
 
 module_init (lart_flash_init);
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 81e49a9b017..ed7e0a1bed3 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -15,952 +15,244 @@
  *
  */
 
-#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/errno.h>
 #include <linux/module.h>
 #include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/mutex.h>
-#include <linux/math64.h>
-#include <linux/slab.h>
-#include <linux/sched.h>
-#include <linux/mod_devicetable.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
+#include <linux/mtd/spi-nor.h>
 
-/* Flash opcodes. */
-#define	OPCODE_WREN		0x06	/* Write enable */
-#define	OPCODE_RDSR		0x05	/* Read status register */
-#define	OPCODE_WRSR		0x01	/* Write status register 1 byte */
-#define	OPCODE_NORM_READ	0x03	/* Read data bytes (low frequency) */
-#define	OPCODE_FAST_READ	0x0b	/* Read data bytes (high frequency) */
-#define	OPCODE_PP		0x02	/* Page program (up to 256 bytes) */
-#define	OPCODE_BE_4K		0x20	/* Erase 4KiB block */
-#define	OPCODE_BE_32K		0x52	/* Erase 32KiB block */
-#define	OPCODE_CHIP_ERASE	0xc7	/* Erase whole flash chip */
-#define	OPCODE_SE		0xd8	/* Sector erase (usually 64KiB) */
-#define	OPCODE_RDID		0x9f	/* Read JEDEC ID */
-
-/* Used for SST flashes only. */
-#define	OPCODE_BP		0x02	/* Byte program */
-#define	OPCODE_WRDI		0x04	/* Write disable */
-#define	OPCODE_AAI_WP		0xad	/* Auto address increment word program */
-
-/* Status Register bits. */
-#define	SR_WIP			1	/* Write in progress */
-#define	SR_WEL			2	/* Write enable latch */
-/* meaning of other SR_* bits may differ between vendors */
-#define	SR_BP0			4	/* Block protect 0 */
-#define	SR_BP1			8	/* Block protect 1 */
-#define	SR_BP2			0x10	/* Block protect 2 */
-#define	SR_SRWD			0x80	/* SR write protect */
-
-/* Define max times to check status register before we give up. */
-#define	MAX_READY_WAIT_JIFFIES	(40 * HZ)	/* M25P16 specs 40s max chip erase */
-#define	MAX_CMD_SIZE		4
-
-#ifdef CONFIG_M25PXX_USE_FAST_READ
-#define OPCODE_READ 	OPCODE_FAST_READ
-#define FAST_READ_DUMMY_BYTE 1
-#else
-#define OPCODE_READ 	OPCODE_NORM_READ
-#define FAST_READ_DUMMY_BYTE 0
-#endif
-
-/****************************************************************************/
-
+#define	MAX_CMD_SIZE		6
 struct m25p {
 	struct spi_device	*spi;
-	struct mutex		lock;
+	struct spi_nor		spi_nor;
 	struct mtd_info		mtd;
-	unsigned		partitioned:1;
-	u16			page_size;
-	u16			addr_width;
-	u8			erase_opcode;
-	u8			*command;
+	u8			command[MAX_CMD_SIZE];
 };
 
-static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd)
-{
-	return container_of(mtd, struct m25p, mtd);
-}
-
-/****************************************************************************/
-
-/*
- * Internal helper functions
- */
-
-/*
- * Read the status register, returning its value in the location
- * Return the status register value.
- * Returns negative if error occurred.
- */
-static int read_sr(struct m25p *flash)
+static int m25p80_read_reg(struct spi_nor *nor, u8 code, u8 *val, int len)
 {
-	ssize_t retval;
-	u8 code = OPCODE_RDSR;
-	u8 val;
-
-	retval = spi_write_then_read(flash->spi, &code, 1, &val, 1);
-
-	if (retval < 0) {
-		dev_err(&flash->spi->dev, "error %d reading SR\n",
-				(int) retval);
-		return retval;
-	}
-
-	return val;
-}
-
-/*
- * Write status register 1 byte
- * Returns negative if error occurred.
- */
-static int write_sr(struct m25p *flash, u8 val)
-{
-	flash->command[0] = OPCODE_WRSR;
-	flash->command[1] = val;
-
-	return spi_write(flash->spi, flash->command, 2);
-}
-
-/*
- * Set write enable latch with Write Enable command.
- * Returns negative if error occurred.
- */
-static inline int write_enable(struct m25p *flash)
-{
-	u8	code = OPCODE_WREN;
-
-	return spi_write_then_read(flash->spi, &code, 1, NULL, 0);
-}
+	struct m25p *flash = nor->priv;
+	struct spi_device *spi = flash->spi;
+	int ret;
 
-/*
- * Send write disble instruction to the chip.
- */
-static inline int write_disable(struct m25p *flash)
-{
-	u8	code = OPCODE_WRDI;
-
-	return spi_write_then_read(flash->spi, &code, 1, NULL, 0);
-}
-
-/*
- * Service routine to read status register until ready, or timeout occurs.
- * Returns non-zero if error.
- */
-static int wait_till_ready(struct m25p *flash)
-{
-	unsigned long deadline;
-	int sr;
-
-	deadline = jiffies + MAX_READY_WAIT_JIFFIES;
-
-	do {
-		if ((sr = read_sr(flash)) < 0)
-			break;
-		else if (!(sr & SR_WIP))
-			return 0;
-
-		cond_resched();
-
-	} while (!time_after_eq(jiffies, deadline));
-
-	return 1;
-}
-
-/*
- * Erase the whole flash memory
- *
- * Returns 0 if successful, non-zero otherwise.
- */
-static int erase_chip(struct m25p *flash)
-{
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: %s %lldKiB\n",
-	      dev_name(&flash->spi->dev), __func__,
-	      (long long)(flash->mtd.size >> 10));
-
-	/* Wait until finished previous write command. */
-	if (wait_till_ready(flash))
-		return 1;
-
-	/* Send write enable, then erase commands. */
-	write_enable(flash);
-
-	/* Set up command buffer. */
-	flash->command[0] = OPCODE_CHIP_ERASE;
+	ret = spi_write_then_read(spi, &code, 1, val, len);
+	if (ret < 0)
+		dev_err(&spi->dev, "error %d reading %x\n", ret, code);
 
-	spi_write(flash->spi, flash->command, 1);
-
-	return 0;
+	return ret;
 }
 
-static void m25p_addr2cmd(struct m25p *flash, unsigned int addr, u8 *cmd)
+static void m25p_addr2cmd(struct spi_nor *nor, unsigned int addr, u8 *cmd)
 {
 	/* opcode is in cmd[0] */
-	cmd[1] = addr >> (flash->addr_width * 8 -  8);
-	cmd[2] = addr >> (flash->addr_width * 8 - 16);
-	cmd[3] = addr >> (flash->addr_width * 8 - 24);
+	cmd[1] = addr >> (nor->addr_width * 8 -  8);
+	cmd[2] = addr >> (nor->addr_width * 8 - 16);
+	cmd[3] = addr >> (nor->addr_width * 8 - 24);
+	cmd[4] = addr >> (nor->addr_width * 8 - 32);
 }
 
-static int m25p_cmdsz(struct m25p *flash)
+static int m25p_cmdsz(struct spi_nor *nor)
 {
-	return 1 + flash->addr_width;
-}
-
-/*
- * Erase one sector of flash memory at offset ``offset'' which is any
- * address within the sector which should be erased.
- *
- * Returns 0 if successful, non-zero otherwise.
- */
-static int erase_sector(struct m25p *flash, u32 offset)
-{
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: %s %dKiB at 0x%08x\n",
-			dev_name(&flash->spi->dev), __func__,
-			flash->mtd.erasesize / 1024, offset);
-
-	/* Wait until finished previous write command. */
-	if (wait_till_ready(flash))
-		return 1;
-
-	/* Send write enable, then erase commands. */
-	write_enable(flash);
-
-	/* Set up command buffer. */
-	flash->command[0] = flash->erase_opcode;
-	m25p_addr2cmd(flash, offset, flash->command);
-
-	spi_write(flash->spi, flash->command, m25p_cmdsz(flash));
-
-	return 0;
+	return 1 + nor->addr_width;
 }
 
-/****************************************************************************/
-
-/*
- * MTD implementation
- */
-
-/*
- * Erase an address range on the flash chip.  The address range may extend
- * one or more erase sectors.  Return an error is there is a problem erasing.
- */
-static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr)
+static int m25p80_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len,
+			int wr_en)
 {
-	struct m25p *flash = mtd_to_m25p(mtd);
-	u32 addr,len;
-	uint32_t rem;
-
-	DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%llx, len %lld\n",
-	      dev_name(&flash->spi->dev), __func__, "at",
-	      (long long)instr->addr, (long long)instr->len);
-
-	/* sanity checks */
-	if (instr->addr + instr->len > flash->mtd.size)
-		return -EINVAL;
-	div_u64_rem(instr->len, mtd->erasesize, &rem);
-	if (rem)
-		return -EINVAL;
-
-	addr = instr->addr;
-	len = instr->len;
-
-	mutex_lock(&flash->lock);
-
-	/* whole-chip erase? */
-	if (len == flash->mtd.size) {
-		if (erase_chip(flash)) {
-			instr->state = MTD_ERASE_FAILED;
-			mutex_unlock(&flash->lock);
-			return -EIO;
-		}
-
-	/* REVISIT in some cases we could speed up erasing large regions
-	 * by using OPCODE_SE instead of OPCODE_BE_4K.  We may have set up
-	 * to use "small sector erase", but that's not always optimal.
-	 */
-
-	/* "sector"-at-a-time erase */
-	} else {
-		while (len) {
-			if (erase_sector(flash, addr)) {
-				instr->state = MTD_ERASE_FAILED;
-				mutex_unlock(&flash->lock);
-				return -EIO;
-			}
-
-			addr += mtd->erasesize;
-			len -= mtd->erasesize;
-		}
-	}
-
-	mutex_unlock(&flash->lock);
+	struct m25p *flash = nor->priv;
+	struct spi_device *spi = flash->spi;
 
-	instr->state = MTD_ERASE_DONE;
-	mtd_erase_callback(instr);
+	flash->command[0] = opcode;
+	if (buf)
+		memcpy(&flash->command[1], buf, len);
 
-	return 0;
+	return spi_write(spi, flash->command, len + 1);
 }
 
-/*
- * Read an address range from the flash chip.  The address range
- * may be any size provided it is within the physical boundaries.
- */
-static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
-	size_t *retlen, u_char *buf)
+static void m25p80_write(struct spi_nor *nor, loff_t to, size_t len,
+			size_t *retlen, const u_char *buf)
 {
-	struct m25p *flash = mtd_to_m25p(mtd);
-	struct spi_transfer t[2];
+	struct m25p *flash = nor->priv;
+	struct spi_device *spi = flash->spi;
+	struct spi_transfer t[2] = {};
 	struct spi_message m;
+	int cmd_sz = m25p_cmdsz(nor);
 
-	DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %zd\n",
-			dev_name(&flash->spi->dev), __func__, "from",
-			(u32)from, len);
-
-	/* sanity checks */
-	if (!len)
-		return 0;
+	spi_message_init(&m);
 
-	if (from + len > flash->mtd.size)
-		return -EINVAL;
+	if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second)
+		cmd_sz = 1;
 
-	spi_message_init(&m);
-	memset(t, 0, (sizeof t));
+	flash->command[0] = nor->program_opcode;
+	m25p_addr2cmd(nor, to, flash->command);
 
-	/* NOTE:
-	 * OPCODE_FAST_READ (if available) is faster.
-	 * Should add 1 byte DUMMY_BYTE.
-	 */
 	t[0].tx_buf = flash->command;
-	t[0].len = m25p_cmdsz(flash) + FAST_READ_DUMMY_BYTE;
+	t[0].len = cmd_sz;
 	spi_message_add_tail(&t[0], &m);
 
-	t[1].rx_buf = buf;
+	t[1].tx_buf = buf;
 	t[1].len = len;
 	spi_message_add_tail(&t[1], &m);
 
-	/* Byte count starts at zero. */
-	if (retlen)
-		*retlen = 0;
+	spi_sync(spi, &m);
 
-	mutex_lock(&flash->lock);
+	*retlen += m.actual_length - cmd_sz;
+}
 
-	/* Wait till previous write/erase is done. */
-	if (wait_till_ready(flash)) {
-		/* REVISIT status return?? */
-		mutex_unlock(&flash->lock);
-		return 1;
+static inline unsigned int m25p80_rx_nbits(struct spi_nor *nor)
+{
+	switch (nor->flash_read) {
+	case SPI_NOR_DUAL:
+		return 2;
+	case SPI_NOR_QUAD:
+		return 4;
+	default:
+		return 0;
 	}
-
-	/* FIXME switch to OPCODE_FAST_READ.  It's required for higher
-	 * clocks; and at this writing, every chip this driver handles
-	 * supports that opcode.
-	 */
-
-	/* Set up the write data buffer. */
-	flash->command[0] = OPCODE_READ;
-	m25p_addr2cmd(flash, from, flash->command);
-
-	spi_sync(flash->spi, &m);
-
-	*retlen = m.actual_length - m25p_cmdsz(flash) - FAST_READ_DUMMY_BYTE;
-
-	mutex_unlock(&flash->lock);
-
-	return 0;
 }
 
 /*
- * Write an address range to the flash chip.  Data must be written in
- * FLASH_PAGESIZE chunks.  The address range may be any size provided
- * it is within the physical boundaries.
+ * Read an address range from the nor chip.  The address range
+ * may be any size provided it is within the physical boundaries.
  */
-static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len,
-	size_t *retlen, const u_char *buf)
+static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
+			size_t *retlen, u_char *buf)
 {
-	struct m25p *flash = mtd_to_m25p(mtd);
-	u32 page_offset, page_size;
+	struct m25p *flash = nor->priv;
+	struct spi_device *spi = flash->spi;
 	struct spi_transfer t[2];
 	struct spi_message m;
+	int dummy = nor->read_dummy;
+	int ret;
 
-	DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %zd\n",
-			dev_name(&flash->spi->dev), __func__, "to",
-			(u32)to, len);
-
-	if (retlen)
-		*retlen = 0;
-
-	/* sanity checks */
-	if (!len)
-		return(0);
-
-	if (to + len > flash->mtd.size)
-		return -EINVAL;
+	/* Wait till previous write/erase is done. */
+	ret = nor->wait_till_ready(nor);
+	if (ret)
+		return ret;
 
 	spi_message_init(&m);
 	memset(t, 0, (sizeof t));
 
+	flash->command[0] = nor->read_opcode;
+	m25p_addr2cmd(nor, from, flash->command);
+
 	t[0].tx_buf = flash->command;
-	t[0].len = m25p_cmdsz(flash);
+	t[0].len = m25p_cmdsz(nor) + dummy;
 	spi_message_add_tail(&t[0], &m);
 
-	t[1].tx_buf = buf;
+	t[1].rx_buf = buf;
+	t[1].rx_nbits = m25p80_rx_nbits(nor);
+	t[1].len = len;
 	spi_message_add_tail(&t[1], &m);
 
-	mutex_lock(&flash->lock);
-
-	/* Wait until finished previous write command. */
-	if (wait_till_ready(flash)) {
-		mutex_unlock(&flash->lock);
-		return 1;
-	}
-
-	write_enable(flash);
-
-	/* Set up the opcode in the write buffer. */
-	flash->command[0] = OPCODE_PP;
-	m25p_addr2cmd(flash, to, flash->command);
-
-	page_offset = to & (flash->page_size - 1);
-
-	/* do all the bytes fit onto one page? */
-	if (page_offset + len <= flash->page_size) {
-		t[1].len = len;
-
-		spi_sync(flash->spi, &m);
-
-		*retlen = m.actual_length - m25p_cmdsz(flash);
-	} else {
-		u32 i;
-
-		/* the size of data remaining on the first page */
-		page_size = flash->page_size - page_offset;
-
-		t[1].len = page_size;
-		spi_sync(flash->spi, &m);
-
-		*retlen = m.actual_length - m25p_cmdsz(flash);
-
-		/* write everything in flash->page_size chunks */
-		for (i = page_size; i < len; i += page_size) {
-			page_size = len - i;
-			if (page_size > flash->page_size)
-				page_size = flash->page_size;
-
-			/* write the next page to flash */
-			m25p_addr2cmd(flash, to + i, flash->command);
-
-			t[1].tx_buf = buf + i;
-			t[1].len = page_size;
-
-			wait_till_ready(flash);
-
-			write_enable(flash);
-
-			spi_sync(flash->spi, &m);
-
-			if (retlen)
-				*retlen += m.actual_length - m25p_cmdsz(flash);
-		}
-	}
-
-	mutex_unlock(&flash->lock);
+	spi_sync(spi, &m);
 
+	*retlen = m.actual_length - m25p_cmdsz(nor) - dummy;
 	return 0;
 }
 
-static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
-		size_t *retlen, const u_char *buf)
+static int m25p80_erase(struct spi_nor *nor, loff_t offset)
 {
-	struct m25p *flash = mtd_to_m25p(mtd);
-	struct spi_transfer t[2];
-	struct spi_message m;
-	size_t actual;
-	int cmd_sz, ret;
-
-	if (retlen)
-		*retlen = 0;
-
-	/* sanity checks */
-	if (!len)
-		return 0;
-
-	if (to + len > flash->mtd.size)
-		return -EINVAL;
+	struct m25p *flash = nor->priv;
+	int ret;
 
-	spi_message_init(&m);
-	memset(t, 0, (sizeof t));
-
-	t[0].tx_buf = flash->command;
-	t[0].len = m25p_cmdsz(flash);
-	spi_message_add_tail(&t[0], &m);
-
-	t[1].tx_buf = buf;
-	spi_message_add_tail(&t[1], &m);
-
-	mutex_lock(&flash->lock);
+	dev_dbg(nor->dev, "%dKiB at 0x%08x\n",
+		flash->mtd.erasesize / 1024, (u32)offset);
 
 	/* Wait until finished previous write command. */
-	ret = wait_till_ready(flash);
-	if (ret)
-		goto time_out;
-
-	write_enable(flash);
-
-	actual = to % 2;
-	/* Start write from odd address. */
-	if (actual) {
-		flash->command[0] = OPCODE_BP;
-		m25p_addr2cmd(flash, to, flash->command);
-
-		/* write one byte. */
-		t[1].len = 1;
-		spi_sync(flash->spi, &m);
-		ret = wait_till_ready(flash);
-		if (ret)
-			goto time_out;
-		*retlen += m.actual_length - m25p_cmdsz(flash);
-	}
-	to += actual;
-
-	flash->command[0] = OPCODE_AAI_WP;
-	m25p_addr2cmd(flash, to, flash->command);
-
-	/* Write out most of the data here. */
-	cmd_sz = m25p_cmdsz(flash);
-	for (; actual < len - 1; actual += 2) {
-		t[0].len = cmd_sz;
-		/* write two bytes. */
-		t[1].len = 2;
-		t[1].tx_buf = buf + actual;
-
-		spi_sync(flash->spi, &m);
-		ret = wait_till_ready(flash);
-		if (ret)
-			goto time_out;
-		*retlen += m.actual_length - cmd_sz;
-		cmd_sz = 1;
-		to += 2;
-	}
-	write_disable(flash);
-	ret = wait_till_ready(flash);
+	ret = nor->wait_till_ready(nor);
 	if (ret)
-		goto time_out;
-
-	/* Write out trailing byte if it exists. */
-	if (actual != len) {
-		write_enable(flash);
-		flash->command[0] = OPCODE_BP;
-		m25p_addr2cmd(flash, to, flash->command);
-		t[0].len = m25p_cmdsz(flash);
-		t[1].len = 1;
-		t[1].tx_buf = buf + actual;
-
-		spi_sync(flash->spi, &m);
-		ret = wait_till_ready(flash);
-		if (ret)
-			goto time_out;
-		*retlen += m.actual_length - m25p_cmdsz(flash);
-		write_disable(flash);
-	}
-
-time_out:
-	mutex_unlock(&flash->lock);
-	return ret;
-}
+		return ret;
 
-/****************************************************************************/
-
-/*
- * SPI device driver setup and teardown
- */
-
-struct flash_info {
-	/* JEDEC id zero means "no ID" (most older chips); otherwise it has
-	 * a high byte of zero plus three data bytes: the manufacturer id,
-	 * then a two byte device id.
-	 */
-	u32		jedec_id;
-	u16             ext_id;
-
-	/* The size listed here is what works with OPCODE_SE, which isn't
-	 * necessarily called a "sector" by the vendor.
-	 */
-	unsigned	sector_size;
-	u16		n_sectors;
-
-	u16		page_size;
-	u16		addr_width;
+	/* Send write enable, then erase commands. */
+	ret = nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0, 0);
+	if (ret)
+		return ret;
 
-	u16		flags;
-#define	SECT_4K		0x01		/* OPCODE_BE_4K works uniformly */
-#define	M25P_NO_ERASE	0x02		/* No erase command needed */
-};
+	/* Set up command buffer. */
+	flash->command[0] = nor->erase_opcode;
+	m25p_addr2cmd(nor, offset, flash->command);
 
-#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags)	\
-	((kernel_ulong_t)&(struct flash_info) {				\
-		.jedec_id = (_jedec_id),				\
-		.ext_id = (_ext_id),					\
-		.sector_size = (_sector_size),				\
-		.n_sectors = (_n_sectors),				\
-		.page_size = 256,					\
-		.addr_width = 3,					\
-		.flags = (_flags),					\
-	})
-
-#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width)	\
-	((kernel_ulong_t)&(struct flash_info) {				\
-		.sector_size = (_sector_size),				\
-		.n_sectors = (_n_sectors),				\
-		.page_size = (_page_size),				\
-		.addr_width = (_addr_width),				\
-		.flags = M25P_NO_ERASE,					\
-	})
-
-/* NOTE: double check command sets and memory organization when you add
- * more flash chips.  This current list focusses on newer chips, which
- * have been converging on command sets which including JEDEC ID.
- */
-static const struct spi_device_id m25p_ids[] = {
-	/* Atmel -- some are (confusingly) marketed as "DataFlash" */
-	{ "at25fs010",  INFO(0x1f6601, 0, 32 * 1024,   4, SECT_4K) },
-	{ "at25fs040",  INFO(0x1f6604, 0, 64 * 1024,   8, SECT_4K) },
-
-	{ "at25df041a", INFO(0x1f4401, 0, 64 * 1024,   8, SECT_4K) },
-	{ "at25df641",  INFO(0x1f4800, 0, 64 * 1024, 128, SECT_4K) },
-
-	{ "at26f004",   INFO(0x1f0400, 0, 64 * 1024,  8, SECT_4K) },
-	{ "at26df081a", INFO(0x1f4501, 0, 64 * 1024, 16, SECT_4K) },
-	{ "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32, SECT_4K) },
-	{ "at26df321",  INFO(0x1f4701, 0, 64 * 1024, 64, SECT_4K) },
-
-	/* Macronix */
-	{ "mx25l4005a",  INFO(0xc22013, 0, 64 * 1024,   8, SECT_4K) },
-	{ "mx25l3205d",  INFO(0xc22016, 0, 64 * 1024,  64, 0) },
-	{ "mx25l6405d",  INFO(0xc22017, 0, 64 * 1024, 128, 0) },
-	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
-	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
-
-	/* Spansion -- single (large) sector size only, at least
-	 * for the chips listed here (without boot sectors).
-	 */
-	{ "s25sl004a",  INFO(0x010212,      0,  64 * 1024,   8, 0) },
-	{ "s25sl008a",  INFO(0x010213,      0,  64 * 1024,  16, 0) },
-	{ "s25sl016a",  INFO(0x010214,      0,  64 * 1024,  32, 0) },
-	{ "s25sl032a",  INFO(0x010215,      0,  64 * 1024,  64, 0) },
-	{ "s25sl064a",  INFO(0x010216,      0,  64 * 1024, 128, 0) },
-	{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024,  64, 0) },
-	{ "s25sl12801", INFO(0x012018, 0x0301,  64 * 1024, 256, 0) },
-	{ "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024,  64, 0) },
-	{ "s25fl129p1", INFO(0x012018, 0x4d01,  64 * 1024, 256, 0) },
-
-	/* SST -- large erase sizes are "overlays", "sectors" are 4K */
-	{ "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024,  8, SECT_4K) },
-	{ "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16, SECT_4K) },
-	{ "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32, SECT_4K) },
-	{ "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64, SECT_4K) },
-	{ "sst25wf512",  INFO(0xbf2501, 0, 64 * 1024,  1, SECT_4K) },
-	{ "sst25wf010",  INFO(0xbf2502, 0, 64 * 1024,  2, SECT_4K) },
-	{ "sst25wf020",  INFO(0xbf2503, 0, 64 * 1024,  4, SECT_4K) },
-	{ "sst25wf040",  INFO(0xbf2504, 0, 64 * 1024,  8, SECT_4K) },
-
-	/* ST Microelectronics -- newer production may have feature updates */
-	{ "m25p05",  INFO(0x202010,  0,  32 * 1024,   2, 0) },
-	{ "m25p10",  INFO(0x202011,  0,  32 * 1024,   4, 0) },
-	{ "m25p20",  INFO(0x202012,  0,  64 * 1024,   4, 0) },
-	{ "m25p40",  INFO(0x202013,  0,  64 * 1024,   8, 0) },
-	{ "m25p80",  INFO(0x202014,  0,  64 * 1024,  16, 0) },
-	{ "m25p16",  INFO(0x202015,  0,  64 * 1024,  32, 0) },
-	{ "m25p32",  INFO(0x202016,  0,  64 * 1024,  64, 0) },
-	{ "m25p64",  INFO(0x202017,  0,  64 * 1024, 128, 0) },
-	{ "m25p128", INFO(0x202018,  0, 256 * 1024,  64, 0) },
-
-	{ "m45pe10", INFO(0x204011,  0, 64 * 1024,    2, 0) },
-	{ "m45pe80", INFO(0x204014,  0, 64 * 1024,   16, 0) },
-	{ "m45pe16", INFO(0x204015,  0, 64 * 1024,   32, 0) },
-
-	{ "m25pe80", INFO(0x208014,  0, 64 * 1024, 16,       0) },
-	{ "m25pe16", INFO(0x208015,  0, 64 * 1024, 32, SECT_4K) },
-
-	/* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
-	{ "w25x10", INFO(0xef3011, 0, 64 * 1024,  2,  SECT_4K) },
-	{ "w25x20", INFO(0xef3012, 0, 64 * 1024,  4,  SECT_4K) },
-	{ "w25x40", INFO(0xef3013, 0, 64 * 1024,  8,  SECT_4K) },
-	{ "w25x80", INFO(0xef3014, 0, 64 * 1024,  16, SECT_4K) },
-	{ "w25x16", INFO(0xef3015, 0, 64 * 1024,  32, SECT_4K) },
-	{ "w25x32", INFO(0xef3016, 0, 64 * 1024,  64, SECT_4K) },
-	{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
-
-	/* Catalyst / On Semiconductor -- non-JEDEC */
-	{ "cat25c11", CAT25_INFO(  16, 8, 16, 1) },
-	{ "cat25c03", CAT25_INFO(  32, 8, 16, 2) },
-	{ "cat25c09", CAT25_INFO( 128, 8, 32, 2) },
-	{ "cat25c17", CAT25_INFO( 256, 8, 32, 2) },
-	{ "cat25128", CAT25_INFO(2048, 8, 64, 2) },
-	{ },
-};
-MODULE_DEVICE_TABLE(spi, m25p_ids);
+	spi_write(flash->spi, flash->command, m25p_cmdsz(nor));
 
-static const struct spi_device_id *__devinit jedec_probe(struct spi_device *spi)
-{
-	int			tmp;
-	u8			code = OPCODE_RDID;
-	u8			id[5];
-	u32			jedec;
-	u16                     ext_jedec;
-	struct flash_info	*info;
-
-	/* JEDEC also defines an optional "extended device information"
-	 * string for after vendor-specific data, after the three bytes
-	 * we use here.  Supporting some chips might require using it.
-	 */
-	tmp = spi_write_then_read(spi, &code, 1, id, 5);
-	if (tmp < 0) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n",
-			dev_name(&spi->dev), tmp);
-		return NULL;
-	}
-	jedec = id[0];
-	jedec = jedec << 8;
-	jedec |= id[1];
-	jedec = jedec << 8;
-	jedec |= id[2];
-
-	/*
-	 * Some chips (like Numonyx M25P80) have JEDEC and non-JEDEC variants,
-	 * which depend on technology process. Officially RDID command doesn't
-	 * exist for non-JEDEC chips, but for compatibility they return ID 0.
-	 */
-	if (jedec == 0)
-		return NULL;
-
-	ext_jedec = id[3] << 8 | id[4];
-
-	for (tmp = 0; tmp < ARRAY_SIZE(m25p_ids) - 1; tmp++) {
-		info = (void *)m25p_ids[tmp].driver_data;
-		if (info->jedec_id == jedec) {
-			if (info->ext_id != 0 && info->ext_id != ext_jedec)
-				continue;
-			return &m25p_ids[tmp];
-		}
-	}
-	return NULL;
+	return 0;
 }
 
-
 /*
  * board specific setup should have ensured the SPI clock used here
  * matches what the READ command supports, at least until this driver
  * understands FAST_READ (for clocks over 25 MHz).
  */
-static int __devinit m25p_probe(struct spi_device *spi)
+static int m25p_probe(struct spi_device *spi)
 {
-	const struct spi_device_id	*id = spi_get_device_id(spi);
+	struct mtd_part_parser_data	ppdata;
 	struct flash_platform_data	*data;
-	struct m25p			*flash;
-	struct flash_info		*info;
-	unsigned			i;
-
-	/* Platform data helps sort out which chip type we have, as
-	 * well as how this board partitions it.  If we don't have
-	 * a chip ID, try the JEDEC id commands; they'll work for most
-	 * newer chips, even if we don't recognize the particular chip.
-	 */
-	data = spi->dev.platform_data;
-	if (data && data->type) {
-		const struct spi_device_id *plat_id;
-
-		for (i = 0; i < ARRAY_SIZE(m25p_ids) - 1; i++) {
-			plat_id = &m25p_ids[i];
-			if (strcmp(data->type, plat_id->name))
-				continue;
-			break;
-		}
-
-		if (plat_id)
-			id = plat_id;
-		else
-			dev_warn(&spi->dev, "unrecognized id %s\n", data->type);
-	}
-
-	info = (void *)id->driver_data;
-
-	if (info->jedec_id) {
-		const struct spi_device_id *jid;
-
-		jid = jedec_probe(spi);
-		if (!jid) {
-			dev_info(&spi->dev, "non-JEDEC variant of %s\n",
-				 id->name);
-		} else if (jid != id) {
-			/*
-			 * JEDEC knows better, so overwrite platform ID. We
-			 * can't trust partitions any longer, but we'll let
-			 * mtd apply them anyway, since some partitions may be
-			 * marked read-only, and we don't want to lose that
-			 * information, even if it's not 100% accurate.
-			 */
-			dev_warn(&spi->dev, "found %s, expected %s\n",
-				 jid->name, id->name);
-			id = jid;
-			info = (void *)jid->driver_data;
-		}
-	}
+	struct m25p *flash;
+	struct spi_nor *nor;
+	enum read_mode mode = SPI_NOR_NORMAL;
+	int ret;
 
-	flash = kzalloc(sizeof *flash, GFP_KERNEL);
+	flash = devm_kzalloc(&spi->dev, sizeof(*flash), GFP_KERNEL);
 	if (!flash)
 		return -ENOMEM;
-	flash->command = kmalloc(MAX_CMD_SIZE + FAST_READ_DUMMY_BYTE, GFP_KERNEL);
-	if (!flash->command) {
-		kfree(flash);
-		return -ENOMEM;
-	}
 
-	flash->spi = spi;
-	mutex_init(&flash->lock);
-	dev_set_drvdata(&spi->dev, flash);
+	nor = &flash->spi_nor;
 
-	/*
-	 * Atmel and SST serial flash tend to power
-	 * up with the software protection bits set
-	 */
+	/* install the hooks */
+	nor->read = m25p80_read;
+	nor->write = m25p80_write;
+	nor->erase = m25p80_erase;
+	nor->write_reg = m25p80_write_reg;
+	nor->read_reg = m25p80_read_reg;
 
-	if (info->jedec_id >> 16 == 0x1f ||
-	    info->jedec_id >> 16 == 0xbf) {
-		write_enable(flash);
-		write_sr(flash, 0);
-	}
+	nor->dev = &spi->dev;
+	nor->mtd = &flash->mtd;
+	nor->priv = flash;
 
-	if (data && data->name)
-		flash->mtd.name = data->name;
-	else
-		flash->mtd.name = dev_name(&spi->dev);
-
-	flash->mtd.type = MTD_NORFLASH;
-	flash->mtd.writesize = 1;
-	flash->mtd.flags = MTD_CAP_NORFLASH;
-	flash->mtd.size = info->sector_size * info->n_sectors;
-	flash->mtd.erase = m25p80_erase;
-	flash->mtd.read = m25p80_read;
-
-	/* sst flash chips use AAI word program */
-	if (info->jedec_id >> 16 == 0xbf)
-		flash->mtd.write = sst_write;
-	else
-		flash->mtd.write = m25p80_write;
-
-	/* prefer "small sector" erase if possible */
-	if (info->flags & SECT_4K) {
-		flash->erase_opcode = OPCODE_BE_4K;
-		flash->mtd.erasesize = 4096;
-	} else {
-		flash->erase_opcode = OPCODE_SE;
-		flash->mtd.erasesize = info->sector_size;
-	}
+	spi_set_drvdata(spi, flash);
+	flash->mtd.priv = nor;
+	flash->spi = spi;
 
-	if (info->flags & M25P_NO_ERASE)
-		flash->mtd.flags |= MTD_NO_ERASE;
-
-	flash->mtd.dev.parent = &spi->dev;
-	flash->page_size = info->page_size;
-	flash->addr_width = info->addr_width;
-
-	dev_info(&spi->dev, "%s (%lld Kbytes)\n", id->name,
-			(long long)flash->mtd.size >> 10);
-
-	DEBUG(MTD_DEBUG_LEVEL2,
-		"mtd .name = %s, .size = 0x%llx (%lldMiB) "
-			".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
-		flash->mtd.name,
-		(long long)flash->mtd.size, (long long)(flash->mtd.size >> 20),
-		flash->mtd.erasesize, flash->mtd.erasesize / 1024,
-		flash->mtd.numeraseregions);
-
-	if (flash->mtd.numeraseregions)
-		for (i = 0; i < flash->mtd.numeraseregions; i++)
-			DEBUG(MTD_DEBUG_LEVEL2,
-				"mtd.eraseregions[%d] = { .offset = 0x%llx, "
-				".erasesize = 0x%.8x (%uKiB), "
-				".numblocks = %d }\n",
-				i, (long long)flash->mtd.eraseregions[i].offset,
-				flash->mtd.eraseregions[i].erasesize,
-				flash->mtd.eraseregions[i].erasesize / 1024,
-				flash->mtd.eraseregions[i].numblocks);
-
-
-	/* partitions should match sector boundaries; and it may be good to
-	 * use readonly partitions for writeprotected sectors (BP2..BP0).
-	 */
-	if (mtd_has_partitions()) {
-		struct mtd_partition	*parts = NULL;
-		int			nr_parts = 0;
-
-		if (mtd_has_cmdlinepart()) {
-			static const char *part_probes[]
-					= { "cmdlinepart", NULL, };
-
-			nr_parts = parse_mtd_partitions(&flash->mtd,
-					part_probes, &parts, 0);
-		}
-
-		if (nr_parts <= 0 && data && data->parts) {
-			parts = data->parts;
-			nr_parts = data->nr_parts;
-		}
-
-		if (nr_parts > 0) {
-			for (i = 0; i < nr_parts; i++) {
-				DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = "
-					"{.name = %s, .offset = 0x%llx, "
-						".size = 0x%llx (%lldKiB) }\n",
-					i, parts[i].name,
-					(long long)parts[i].offset,
-					(long long)parts[i].size,
-					(long long)(parts[i].size >> 10));
-			}
-			flash->partitioned = 1;
-			return add_mtd_partitions(&flash->mtd, parts, nr_parts);
-		}
-	} else if (data && data->nr_parts)
-		dev_warn(&spi->dev, "ignoring %d default partitions on %s\n",
-				data->nr_parts, data->name);
-
-	return add_mtd_device(&flash->mtd) == 1 ? -ENODEV : 0;
+	if (spi->mode & SPI_RX_QUAD)
+		mode = SPI_NOR_QUAD;
+	else if (spi->mode & SPI_RX_DUAL)
+		mode = SPI_NOR_DUAL;
+	ret = spi_nor_scan(nor, spi_get_device_id(spi), mode);
+	if (ret)
+		return ret;
+
+	data = dev_get_platdata(&spi->dev);
+	ppdata.of_node = spi->dev.of_node;
+
+	return mtd_device_parse_register(&flash->mtd, NULL, &ppdata,
+			data ? data->parts : NULL,
+			data ? data->nr_parts : 0);
 }
 
 
-static int __devexit m25p_remove(struct spi_device *spi)
+static int m25p_remove(struct spi_device *spi)
 {
-	struct m25p	*flash = dev_get_drvdata(&spi->dev);
-	int		status;
+	struct m25p	*flash = spi_get_drvdata(spi);
 
 	/* Clean up MTD stuff. */
-	if (mtd_has_partitions() && flash->partitioned)
-		status = del_mtd_partitions(&flash->mtd);
-	else
-		status = del_mtd_device(&flash->mtd);
-	if (status == 0) {
-		kfree(flash->command);
-		kfree(flash);
-	}
-	return 0;
+	return mtd_device_unregister(&flash->mtd);
 }
 
 
 static struct spi_driver m25p80_driver = {
 	.driver = {
 		.name	= "m25p80",
-		.bus	= &spi_bus_type,
 		.owner	= THIS_MODULE,
 	},
-	.id_table	= m25p_ids,
+	.id_table	= spi_nor_ids,
 	.probe	= m25p_probe,
-	.remove	= __devexit_p(m25p_remove),
+	.remove	= m25p_remove,
 
 	/* REVISIT: many of these chips have deep power-down modes, which
 	 * should clearly be entered on suspend() to minimize power use.
@@ -968,21 +260,7 @@ static struct spi_driver m25p80_driver = {
 	 */
 };
 
-
-static int __init m25p80_init(void)
-{
-	return spi_register_driver(&m25p80_driver);
-}
-
-
-static void __exit m25p80_exit(void)
-{
-	spi_unregister_driver(&m25p80_driver);
-}
-
-
-module_init(m25p80_init);
-module_exit(m25p80_exit);
+module_spi_driver(m25p80_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Mike Lavender");
diff --git a/drivers/mtd/devices/ms02-nv.c b/drivers/mtd/devices/ms02-nv.c
index 6a9a24a80a6..5c8b322ba90 100644
--- a/drivers/mtd/devices/ms02-nv.c
+++ b/drivers/mtd/devices/ms02-nv.c
@@ -59,12 +59,8 @@ static int ms02nv_read(struct mtd_info *mtd, loff_t from,
 {
 	struct ms02nv_private *mp = mtd->priv;
 
-	if (from + len > mtd->size)
-		return -EINVAL;
-
 	memcpy(buf, mp->uaddr + from, len);
 	*retlen = len;
-
 	return 0;
 }
 
@@ -73,12 +69,8 @@ static int ms02nv_write(struct mtd_info *mtd, loff_t to,
 {
 	struct ms02nv_private *mp = mtd->priv;
 
-	if (to + len > mtd->size)
-		return -EINVAL;
-
 	memcpy(mp->uaddr + to, buf, len);
 	*retlen = len;
-
 	return 0;
 }
 
@@ -213,14 +205,14 @@ static int __init ms02nv_init_one(ulong addr)
 	mtd->type = MTD_RAM;
 	mtd->flags = MTD_CAP_RAM;
 	mtd->size = fixsize;
-	mtd->name = (char *)ms02nv_name;
+	mtd->name = ms02nv_name;
 	mtd->owner = THIS_MODULE;
-	mtd->read = ms02nv_read;
-	mtd->write = ms02nv_write;
+	mtd->_read = ms02nv_read;
+	mtd->_write = ms02nv_write;
 	mtd->writesize = 1;
 
 	ret = -EIO;
-	if (add_mtd_device(mtd)) {
+	if (mtd_device_register(mtd, NULL, 0)) {
 		printk(KERN_ERR
 			"ms02-nv: Unable to register MTD device, aborting!\n");
 		goto err_out_csr_res;
@@ -262,7 +254,7 @@ static void __exit ms02nv_remove_one(void)
 
 	root_ms02nv_mtd = mp->next;
 
-	del_mtd_device(mtd);
+	mtd_device_unregister(mtd);
 
 	release_resource(mp->resource.csr);
 	kfree(mp->resource.csr);
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 19817404ce7..dd22ce2cc9a 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -10,13 +10,14 @@
  * 2 of the License, or (at your option) any later version.
 */
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/mutex.h>
 #include <linux/err.h>
 #include <linux/math64.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
@@ -24,7 +25,6 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
-
 /*
  * DataFlash is a kind of SPI flash.  Most AT45 chips have two buffers in
  * each chip, which may be used for double buffered I/O; but this driver
@@ -87,8 +87,6 @@ struct dataflash {
 	uint8_t			command[4];
 	char			name[24];
 
-	unsigned		partitioned:1;
-
 	unsigned short		page_offset;	/* offset in flash address */
 	unsigned int		page_size;	/* of bytes per page */
 
@@ -98,6 +96,14 @@ struct dataflash {
 	struct mtd_info		mtd;
 };
 
+#ifdef CONFIG_OF
+static const struct of_device_id dataflash_dt_ids[] = {
+	{ .compatible = "atmel,at45", },
+	{ .compatible = "atmel,dataflash", },
+	{ /* sentinel */ }
+};
+#endif
+
 /* ......................................................................... */
 
 /*
@@ -122,7 +128,7 @@ static int dataflash_waitready(struct spi_device *spi)
 	for (;;) {
 		status = dataflash_status(spi);
 		if (status < 0) {
-			DEBUG(MTD_DEBUG_LEVEL1, "%s: status %d?\n",
+			pr_debug("%s: status %d?\n",
 					dev_name(&spi->dev), status);
 			status = 0;
 		}
@@ -141,7 +147,7 @@ static int dataflash_waitready(struct spi_device *spi)
  */
 static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
 {
-	struct dataflash	*priv = (struct dataflash *)mtd->priv;
+	struct dataflash	*priv = mtd->priv;
 	struct spi_device	*spi = priv->spi;
 	struct spi_transfer	x = { .tx_dma = 0, };
 	struct spi_message	msg;
@@ -149,13 +155,10 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
 	uint8_t			*command;
 	uint32_t		rem;
 
-	DEBUG(MTD_DEBUG_LEVEL2, "%s: erase addr=0x%llx len 0x%llx\n",
+	pr_debug("%s: erase addr=0x%llx len 0x%llx\n",
 	      dev_name(&spi->dev), (long long)instr->addr,
 	      (long long)instr->len);
 
-	/* Sanity checks */
-	if (instr->addr + instr->len > mtd->size)
-		return -EINVAL;
 	div_u64_rem(instr->len, priv->page_size, &rem);
 	if (rem)
 		return -EINVAL;
@@ -187,7 +190,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
 		command[2] = (uint8_t)(pageaddr >> 8);
 		command[3] = 0;
 
-		DEBUG(MTD_DEBUG_LEVEL3, "ERASE %s: (%x) %x %x %x [%i]\n",
+		pr_debug("ERASE %s: (%x) %x %x %x [%i]\n",
 			do_block ? "block" : "page",
 			command[0], command[1], command[2], command[3],
 			pageaddr);
@@ -231,23 +234,15 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
 static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
 			       size_t *retlen, u_char *buf)
 {
-	struct dataflash	*priv = (struct dataflash *)mtd->priv;
+	struct dataflash	*priv = mtd->priv;
 	struct spi_transfer	x[2] = { { .tx_dma = 0, }, };
 	struct spi_message	msg;
 	unsigned int		addr;
 	uint8_t			*command;
 	int			status;
 
-	DEBUG(MTD_DEBUG_LEVEL2, "%s: read 0x%x..0x%x\n",
-		dev_name(&priv->spi->dev), (unsigned)from, (unsigned)(from + len));
-
-	*retlen = 0;
-
-	/* Sanity checks */
-	if (!len)
-		return 0;
-	if (from + len > mtd->size)
-		return -EINVAL;
+	pr_debug("%s: read 0x%x..0x%x\n", dev_name(&priv->spi->dev),
+			(unsigned)from, (unsigned)(from + len));
 
 	/* Calculate flash page/byte address */
 	addr = (((unsigned)from / priv->page_size) << priv->page_offset)
@@ -255,7 +250,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
 
 	command = priv->command;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "READ: (%x) %x %x %x\n",
+	pr_debug("READ: (%x) %x %x %x\n",
 		command[0], command[1], command[2], command[3]);
 
 	spi_message_init(&msg);
@@ -287,7 +282,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
 		*retlen = msg.actual_length - 8;
 		status = 0;
 	} else
-		DEBUG(MTD_DEBUG_LEVEL1, "%s: read %x..%x --> %d\n",
+		pr_debug("%s: read %x..%x --> %d\n",
 			dev_name(&priv->spi->dev),
 			(unsigned)from, (unsigned)(from + len),
 			status);
@@ -304,7 +299,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
 static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
 				size_t * retlen, const u_char * buf)
 {
-	struct dataflash	*priv = (struct dataflash *)mtd->priv;
+	struct dataflash	*priv = mtd->priv;
 	struct spi_device	*spi = priv->spi;
 	struct spi_transfer	x[2] = { { .tx_dma = 0, }, };
 	struct spi_message	msg;
@@ -314,17 +309,9 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
 	int			status = -EINVAL;
 	uint8_t			*command;
 
-	DEBUG(MTD_DEBUG_LEVEL2, "%s: write 0x%x..0x%x\n",
+	pr_debug("%s: write 0x%x..0x%x\n",
 		dev_name(&spi->dev), (unsigned)to, (unsigned)(to + len));
 
-	*retlen = 0;
-
-	/* Sanity checks */
-	if (!len)
-		return 0;
-	if ((to + len) > mtd->size)
-		return -EINVAL;
-
 	spi_message_init(&msg);
 
 	x[0].tx_buf = command = priv->command;
@@ -340,7 +327,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
 
 	mutex_lock(&priv->lock);
 	while (remaining > 0) {
-		DEBUG(MTD_DEBUG_LEVEL3, "write @ %i:%i len=%i\n",
+		pr_debug("write @ %i:%i len=%i\n",
 			pageaddr, offset, writelen);
 
 		/* REVISIT:
@@ -368,12 +355,12 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
 			command[2] = (addr & 0x0000FF00) >> 8;
 			command[3] = 0;
 
-			DEBUG(MTD_DEBUG_LEVEL3, "TRANSFER: (%x) %x %x %x\n",
+			pr_debug("TRANSFER: (%x) %x %x %x\n",
 				command[0], command[1], command[2], command[3]);
 
 			status = spi_sync(spi, &msg);
 			if (status < 0)
-				DEBUG(MTD_DEBUG_LEVEL1, "%s: xfer %u -> %d \n",
+				pr_debug("%s: xfer %u -> %d\n",
 					dev_name(&spi->dev), addr, status);
 
 			(void) dataflash_waitready(priv->spi);
@@ -386,7 +373,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
 		command[2] = (addr & 0x0000FF00) >> 8;
 		command[3] = (addr & 0x000000FF);
 
-		DEBUG(MTD_DEBUG_LEVEL3, "PROGRAM: (%x) %x %x %x\n",
+		pr_debug("PROGRAM: (%x) %x %x %x\n",
 			command[0], command[1], command[2], command[3]);
 
 		x[1].tx_buf = writebuf;
@@ -395,7 +382,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
 		status = spi_sync(spi, &msg);
 		spi_transfer_del(x + 1);
 		if (status < 0)
-			DEBUG(MTD_DEBUG_LEVEL1, "%s: pgm %u/%u -> %d \n",
+			pr_debug("%s: pgm %u/%u -> %d\n",
 				dev_name(&spi->dev), addr, writelen, status);
 
 		(void) dataflash_waitready(priv->spi);
@@ -410,12 +397,12 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
 		command[2] = (addr & 0x0000FF00) >> 8;
 		command[3] = 0;
 
-		DEBUG(MTD_DEBUG_LEVEL3, "COMPARE: (%x) %x %x %x\n",
+		pr_debug("COMPARE: (%x) %x %x %x\n",
 			command[0], command[1], command[2], command[3]);
 
 		status = spi_sync(spi, &msg);
 		if (status < 0)
-			DEBUG(MTD_DEBUG_LEVEL1, "%s: compare %u -> %d \n",
+			pr_debug("%s: compare %u -> %d\n",
 				dev_name(&spi->dev), addr, status);
 
 		status = dataflash_waitready(priv->spi);
@@ -452,8 +439,8 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
 
 #ifdef CONFIG_MTD_DATAFLASH_OTP
 
-static int dataflash_get_otp_info(struct mtd_info *mtd,
-		struct otp_info *info, size_t len)
+static int dataflash_get_otp_info(struct mtd_info *mtd, size_t len,
+				  size_t *retlen, struct otp_info *info)
 {
 	/* Report both blocks as identical:  bytes 0..64, locked.
 	 * Unless the user block changed from all-ones, we can't
@@ -462,7 +449,8 @@ static int dataflash_get_otp_info(struct mtd_info *mtd,
 	info->start = 0;
 	info->length = 64;
 	info->locked = 1;
-	return sizeof(*info);
+	*retlen = sizeof(*info);
+	return 0;
 }
 
 static ssize_t otp_read(struct spi_device *spi, unsigned base,
@@ -479,8 +467,6 @@ static ssize_t otp_read(struct spi_device *spi, unsigned base,
 
 	if ((off + len) > 64)
 		len = 64 - off;
-	if (len == 0)
-		return len;
 
 	spi_message_init(&m);
 
@@ -515,7 +501,7 @@ static ssize_t otp_read(struct spi_device *spi, unsigned base,
 static int dataflash_read_fact_otp(struct mtd_info *mtd,
 		loff_t from, size_t len, size_t *retlen, u_char *buf)
 {
-	struct dataflash	*priv = (struct dataflash *)mtd->priv;
+	struct dataflash	*priv = mtd->priv;
 	int			status;
 
 	/* 64 bytes, from 0..63 ... start at 64 on-chip */
@@ -532,7 +518,7 @@ static int dataflash_read_fact_otp(struct mtd_info *mtd,
 static int dataflash_read_user_otp(struct mtd_info *mtd,
 		loff_t from, size_t len, size_t *retlen, u_char *buf)
 {
-	struct dataflash	*priv = (struct dataflash *)mtd->priv;
+	struct dataflash	*priv = mtd->priv;
 	int			status;
 
 	/* 64 bytes, from 0..63 ... start at 0 on-chip */
@@ -553,17 +539,21 @@ static int dataflash_write_user_otp(struct mtd_info *mtd,
 	const size_t		l = 4 + 64;
 	uint8_t			*scratch;
 	struct spi_transfer	t;
-	struct dataflash	*priv = (struct dataflash *)mtd->priv;
+	struct dataflash	*priv = mtd->priv;
 	int			status;
 
-	if (len > 64)
-		return -EINVAL;
+	if (from >= 64) {
+		/*
+		 * Attempting to write beyond the end of OTP memory,
+		 * no data can be written.
+		 */
+		*retlen = 0;
+		return 0;
+	}
 
-	/* Strictly speaking, we *could* truncate the write ... but
-	 * let's not do that for the only write that's ever possible.
-	 */
+	/* Truncate the write to fit into OTP memory. */
 	if ((from + len) > 64)
-		return -EINVAL;
+		len = 64 - from;
 
 	/* OUT: OP_WRITE_SECURITY, 3 zeroes, 64 data-or-zero bytes
 	 * IN:  ignore all
@@ -600,16 +590,16 @@ static int dataflash_write_user_otp(struct mtd_info *mtd,
 
 static char *otp_setup(struct mtd_info *device, char revision)
 {
-	device->get_fact_prot_info = dataflash_get_otp_info;
-	device->read_fact_prot_reg = dataflash_read_fact_otp;
-	device->get_user_prot_info = dataflash_get_otp_info;
-	device->read_user_prot_reg = dataflash_read_user_otp;
+	device->_get_fact_prot_info = dataflash_get_otp_info;
+	device->_read_fact_prot_reg = dataflash_read_fact_otp;
+	device->_get_user_prot_info = dataflash_get_otp_info;
+	device->_read_user_prot_reg = dataflash_read_user_otp;
 
 	/* rev c parts (at45db321c and at45db1281 only!) use a
 	 * different write procedure; not (yet?) implemented.
 	 */
 	if (revision > 'c')
-		device->write_user_prot_reg = dataflash_write_user_otp;
+		device->_write_user_prot_reg = dataflash_write_user_otp;
 
 	return ", OTP";
 }
@@ -628,13 +618,13 @@ static char *otp_setup(struct mtd_info *device, char revision)
 /*
  * Register DataFlash device with MTD subsystem.
  */
-static int __devinit
-add_dataflash_otp(struct spi_device *spi, char *name,
-		int nr_pages, int pagesize, int pageoffset, char revision)
+static int add_dataflash_otp(struct spi_device *spi, char *name, int nr_pages,
+			     int pagesize, int pageoffset, char revision)
 {
 	struct dataflash		*priv;
 	struct mtd_info			*device;
-	struct flash_platform_data	*pdata = spi->dev.platform_data;
+	struct mtd_part_parser_data	ppdata;
+	struct flash_platform_data	*pdata = dev_get_platdata(&spi->dev);
 	char				*otp_tag = "";
 	int				err = 0;
 
@@ -660,9 +650,9 @@ add_dataflash_otp(struct spi_device *spi, char *name,
 	device->owner = THIS_MODULE;
 	device->type = MTD_DATAFLASH;
 	device->flags = MTD_WRITEABLE;
-	device->erase = dataflash_erase;
-	device->read = dataflash_read;
-	device->write = dataflash_write;
+	device->_erase = dataflash_erase;
+	device->_read = dataflash_read;
+	device->_write = dataflash_write;
 	device->priv = priv;
 
 	device->dev.parent = &spi->dev;
@@ -673,49 +663,22 @@ add_dataflash_otp(struct spi_device *spi, char *name,
 	dev_info(&spi->dev, "%s (%lld KBytes) pagesize %d bytes%s\n",
 			name, (long long)((device->size + 1023) >> 10),
 			pagesize, otp_tag);
-	dev_set_drvdata(&spi->dev, priv);
-
-	if (mtd_has_partitions()) {
-		struct mtd_partition	*parts;
-		int			nr_parts = 0;
-
-		if (mtd_has_cmdlinepart()) {
-			static const char *part_probes[]
-					= { "cmdlinepart", NULL, };
-
-			nr_parts = parse_mtd_partitions(device,
-					part_probes, &parts, 0);
-		}
-
-		if (nr_parts <= 0 && pdata && pdata->parts) {
-			parts = pdata->parts;
-			nr_parts = pdata->nr_parts;
-		}
-
-		if (nr_parts > 0) {
-			priv->partitioned = 1;
-			err = add_mtd_partitions(device, parts, nr_parts);
-			goto out;
-		}
-	} else if (pdata && pdata->nr_parts)
-		dev_warn(&spi->dev, "ignoring %d default partitions on %s\n",
-				pdata->nr_parts, device->name);
+	spi_set_drvdata(spi, priv);
 
-	if (add_mtd_device(device) == 1)
-		err = -ENODEV;
+	ppdata.of_node = spi->dev.of_node;
+	err = mtd_device_parse_register(device, NULL, &ppdata,
+			pdata ? pdata->parts : NULL,
+			pdata ? pdata->nr_parts : 0);
 
-out:
 	if (!err)
 		return 0;
 
-	dev_set_drvdata(&spi->dev, NULL);
 	kfree(priv);
 	return err;
 }
 
-static inline int __devinit
-add_dataflash(struct spi_device *spi, char *name,
-		int nr_pages, int pagesize, int pageoffset)
+static inline int add_dataflash(struct spi_device *spi, char *name,
+				int nr_pages, int pagesize, int pageoffset)
 {
 	return add_dataflash_otp(spi, name, nr_pages, pagesize,
 			pageoffset, 0);
@@ -739,7 +702,7 @@ struct flash_info {
 #define IS_POW2PS	0x0001		/* uses 2^N byte pages */
 };
 
-static struct flash_info __devinitdata dataflash_data [] = {
+static struct flash_info dataflash_data[] = {
 
 	/*
 	 * NOTE:  chips with SUP_POW2PS (rev D and up) need two entries,
@@ -774,7 +737,7 @@ static struct flash_info __devinitdata dataflash_data [] = {
 	{ "at45db642d",  0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS},
 };
 
-static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
+static struct flash_info *jedec_probe(struct spi_device *spi)
 {
 	int			tmp;
 	uint8_t			code = OP_READ_ID;
@@ -793,7 +756,7 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
 	 */
 	tmp = spi_write_then_read(spi, &code, 1, id, 3);
 	if (tmp < 0) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n",
+		pr_debug("%s: error %d reading JEDEC ID\n",
 			dev_name(&spi->dev), tmp);
 		return ERR_PTR(tmp);
 	}
@@ -810,7 +773,7 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
 			tmp < ARRAY_SIZE(dataflash_data);
 			tmp++, info++) {
 		if (info->jedec_id == jedec) {
-			DEBUG(MTD_DEBUG_LEVEL1, "%s: OTP, sector protect%s\n",
+			pr_debug("%s: OTP, sector protect%s\n",
 				dev_name(&spi->dev),
 				(info->flags & SUP_POW2PS)
 					? ", binary pagesize" : ""
@@ -818,8 +781,7 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
 			if (info->flags & SUP_POW2PS) {
 				status = dataflash_status(spi);
 				if (status < 0) {
-					DEBUG(MTD_DEBUG_LEVEL1,
-						"%s: status error %d\n",
+					pr_debug("%s: status error %d\n",
 						dev_name(&spi->dev), status);
 					return ERR_PTR(status);
 				}
@@ -858,7 +820,7 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
  *   AT45DB0642  64Mbit  (8M)    xx111xxx (0x3c)   8192   1056     11
  *   AT45DB1282  128Mbit (16M)   xx0100xx (0x10)  16384   1056     11
  */
-static int __devinit dataflash_probe(struct spi_device *spi)
+static int dataflash_probe(struct spi_device *spi)
 {
 	int status;
 	struct flash_info	*info;
@@ -884,7 +846,7 @@ static int __devinit dataflash_probe(struct spi_device *spi)
 	 */
 	status = dataflash_status(spi);
 	if (status <= 0 || status == 0xff) {
-		DEBUG(MTD_DEBUG_LEVEL1, "%s: status error %d\n",
+		pr_debug("%s: status error %d\n",
 				dev_name(&spi->dev), status);
 		if (status == 0 || status == 0xff)
 			status = -ENODEV;
@@ -920,61 +882,45 @@ static int __devinit dataflash_probe(struct spi_device *spi)
 		break;
 	/* obsolete AT45DB1282 not (yet?) supported */
 	default:
-		DEBUG(MTD_DEBUG_LEVEL1, "%s: unsupported device (%x)\n",
-				dev_name(&spi->dev), status & 0x3c);
+		dev_info(&spi->dev, "unsupported device (%x)\n",
+				status & 0x3c);
 		status = -ENODEV;
 	}
 
 	if (status < 0)
-		DEBUG(MTD_DEBUG_LEVEL1, "%s: add_dataflash --> %d\n",
-				dev_name(&spi->dev), status);
+		pr_debug("%s: add_dataflash --> %d\n", dev_name(&spi->dev),
+				status);
 
 	return status;
 }
 
-static int __devexit dataflash_remove(struct spi_device *spi)
+static int dataflash_remove(struct spi_device *spi)
 {
-	struct dataflash	*flash = dev_get_drvdata(&spi->dev);
+	struct dataflash	*flash = spi_get_drvdata(spi);
 	int			status;
 
-	DEBUG(MTD_DEBUG_LEVEL1, "%s: remove\n", dev_name(&spi->dev));
+	pr_debug("%s: remove\n", dev_name(&spi->dev));
 
-	if (mtd_has_partitions() && flash->partitioned)
-		status = del_mtd_partitions(&flash->mtd);
-	else
-		status = del_mtd_device(&flash->mtd);
-	if (status == 0) {
-		dev_set_drvdata(&spi->dev, NULL);
+	status = mtd_device_unregister(&flash->mtd);
+	if (status == 0)
 		kfree(flash);
-	}
 	return status;
 }
 
 static struct spi_driver dataflash_driver = {
 	.driver = {
 		.name		= "mtd_dataflash",
-		.bus		= &spi_bus_type,
 		.owner		= THIS_MODULE,
+		.of_match_table = of_match_ptr(dataflash_dt_ids),
 	},
 
 	.probe		= dataflash_probe,
-	.remove		= __devexit_p(dataflash_remove),
+	.remove		= dataflash_remove,
 
 	/* FIXME:  investigate suspend and resume... */
 };
 
-static int __init dataflash_init(void)
-{
-	return spi_register_driver(&dataflash_driver);
-}
-module_init(dataflash_init);
-
-static void __exit dataflash_exit(void)
-{
-	spi_unregister_driver(&dataflash_driver);
-}
-module_exit(dataflash_exit);
-
+module_spi_driver(dataflash_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Andrew Victor, David Brownell");
diff --git a/drivers/mtd/devices/mtdram.c b/drivers/mtd/devices/mtdram.c
index fce5ff7589a..8e285089229 100644
--- a/drivers/mtd/devices/mtdram.c
+++ b/drivers/mtd/devices/mtdram.c
@@ -14,7 +14,6 @@
 #include <linux/ioport.h>
 #include <linux/vmalloc.h>
 #include <linux/init.h>
-#include <linux/mtd/compatmac.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/mtdram.h>
 
@@ -35,34 +34,23 @@ static struct mtd_info *mtd_info;
 
 static int ram_erase(struct mtd_info *mtd, struct erase_info *instr)
 {
-	if (instr->addr + instr->len > mtd->size)
-		return -EINVAL;
-
 	memset((char *)mtd->priv + instr->addr, 0xff, instr->len);
-
 	instr->state = MTD_ERASE_DONE;
 	mtd_erase_callback(instr);
-
 	return 0;
 }
 
 static int ram_point(struct mtd_info *mtd, loff_t from, size_t len,
 		size_t *retlen, void **virt, resource_size_t *phys)
 {
-	if (from + len > mtd->size)
-		return -EINVAL;
-
-	/* can we return a physical address with this driver? */
-	if (phys)
-		return -EINVAL;
-
 	*virt = mtd->priv + from;
 	*retlen = len;
 	return 0;
 }
 
-static void ram_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
+static int ram_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 {
+	return 0;
 }
 
 /*
@@ -81,11 +69,7 @@ static unsigned long ram_get_unmapped_area(struct mtd_info *mtd,
 static int ram_read(struct mtd_info *mtd, loff_t from, size_t len,
 		size_t *retlen, u_char *buf)
 {
-	if (from + len > mtd->size)
-		return -EINVAL;
-
 	memcpy(buf, mtd->priv + from, len);
-
 	*retlen = len;
 	return 0;
 }
@@ -93,11 +77,7 @@ static int ram_read(struct mtd_info *mtd, loff_t from, size_t len,
 static int ram_write(struct mtd_info *mtd, loff_t to, size_t len,
 		size_t *retlen, const u_char *buf)
 {
-	if (to + len > mtd->size)
-		return -EINVAL;
-
 	memcpy((char *)mtd->priv + to, buf, len);
-
 	*retlen = len;
 	return 0;
 }
@@ -105,14 +85,14 @@ static int ram_write(struct mtd_info *mtd, loff_t to, size_t len,
 static void __exit cleanup_mtdram(void)
 {
 	if (mtd_info) {
-		del_mtd_device(mtd_info);
+		mtd_device_unregister(mtd_info);
 		vfree(mtd_info->priv);
 		kfree(mtd_info);
 	}
 }
 
 int mtdram_init_device(struct mtd_info *mtd, void *mapped_address,
-		unsigned long size, char *name)
+		unsigned long size, const char *name)
 {
 	memset(mtd, 0, sizeof(*mtd));
 
@@ -122,20 +102,20 @@ int mtdram_init_device(struct mtd_info *mtd, void *mapped_address,
 	mtd->flags = MTD_CAP_RAM;
 	mtd->size = size;
 	mtd->writesize = 1;
+	mtd->writebufsize = 64; /* Mimic CFI NOR flashes */
 	mtd->erasesize = MTDRAM_ERASE_SIZE;
 	mtd->priv = mapped_address;
 
 	mtd->owner = THIS_MODULE;
-	mtd->erase = ram_erase;
-	mtd->point = ram_point;
-	mtd->unpoint = ram_unpoint;
-	mtd->get_unmapped_area = ram_get_unmapped_area;
-	mtd->read = ram_read;
-	mtd->write = ram_write;
-
-	if (add_mtd_device(mtd)) {
+	mtd->_erase = ram_erase;
+	mtd->_point = ram_point;
+	mtd->_unpoint = ram_unpoint;
+	mtd->_get_unmapped_area = ram_get_unmapped_area;
+	mtd->_read = ram_read;
+	mtd->_write = ram_write;
+
+	if (mtd_device_register(mtd, NULL, 0))
 		return -EIO;
-	}
 
 	return 0;
 }
diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c
index 1696bbecaa7..2cceebfb251 100644
--- a/drivers/mtd/devices/phram.c
+++ b/drivers/mtd/devices/phram.c
@@ -15,7 +15,7 @@
  *	phram=swap,64Mi,128Mi phram=test,900Mi,1Mi
  */
 
-#define pr_fmt(fmt) "phram: " fmt
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <asm/io.h>
 #include <linux/init.h>
@@ -33,45 +33,33 @@ struct phram_mtd_list {
 
 static LIST_HEAD(phram_list);
 
-
 static int phram_erase(struct mtd_info *mtd, struct erase_info *instr)
 {
 	u_char *start = mtd->priv;
 
-	if (instr->addr + instr->len > mtd->size)
-		return -EINVAL;
-
 	memset(start + instr->addr, 0xff, instr->len);
 
-	/* This'll catch a few races. Free the thing before returning :)
+	/*
+	 * This'll catch a few races. Free the thing before returning :)
 	 * I don't feel at all ashamed. This kind of thing is possible anyway
 	 * with flash, but unlikely.
 	 */
-
 	instr->state = MTD_ERASE_DONE;
-
 	mtd_erase_callback(instr);
-
 	return 0;
 }
 
 static int phram_point(struct mtd_info *mtd, loff_t from, size_t len,
 		size_t *retlen, void **virt, resource_size_t *phys)
 {
-	if (from + len > mtd->size)
-		return -EINVAL;
-
-	/* can we return a physical address with this driver? */
-	if (phys)
-		return -EINVAL;
-
 	*virt = mtd->priv + from;
 	*retlen = len;
 	return 0;
 }
 
-static void phram_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
+static int phram_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 {
+	return 0;
 }
 
 static int phram_read(struct mtd_info *mtd, loff_t from, size_t len,
@@ -79,14 +67,7 @@ static int phram_read(struct mtd_info *mtd, loff_t from, size_t len,
 {
 	u_char *start = mtd->priv;
 
-	if (from >= mtd->size)
-		return -EINVAL;
-
-	if (len > mtd->size - from)
-		len = mtd->size - from;
-
 	memcpy(buf, start + from, len);
-
 	*retlen = len;
 	return 0;
 }
@@ -96,32 +77,24 @@ static int phram_write(struct mtd_info *mtd, loff_t to, size_t len,
 {
 	u_char *start = mtd->priv;
 
-	if (to >= mtd->size)
-		return -EINVAL;
-
-	if (len > mtd->size - to)
-		len = mtd->size - to;
-
 	memcpy(start + to, buf, len);
-
 	*retlen = len;
 	return 0;
 }
 
-
-
 static void unregister_devices(void)
 {
 	struct phram_mtd_list *this, *safe;
 
 	list_for_each_entry_safe(this, safe, &phram_list, list) {
-		del_mtd_device(&this->mtd);
+		mtd_device_unregister(&this->mtd);
 		iounmap(this->mtd.priv);
+		kfree(this->mtd.name);
 		kfree(this);
 	}
 }
 
-static int register_device(char *name, unsigned long start, unsigned long len)
+static int register_device(char *name, phys_addr_t start, size_t len)
 {
 	struct phram_mtd_list *new;
 	int ret = -ENOMEM;
@@ -141,18 +114,18 @@ static int register_device(char *name, unsigned long start, unsigned long len)
 	new->mtd.name = name;
 	new->mtd.size = len;
 	new->mtd.flags = MTD_CAP_RAM;
-        new->mtd.erase = phram_erase;
-	new->mtd.point = phram_point;
-	new->mtd.unpoint = phram_unpoint;
-	new->mtd.read = phram_read;
-	new->mtd.write = phram_write;
+	new->mtd._erase = phram_erase;
+	new->mtd._point = phram_point;
+	new->mtd._unpoint = phram_unpoint;
+	new->mtd._read = phram_read;
+	new->mtd._write = phram_write;
 	new->mtd.owner = THIS_MODULE;
 	new->mtd.type = MTD_RAM;
 	new->mtd.erasesize = PAGE_SIZE;
 	new->mtd.writesize = 1;
 
 	ret = -EAGAIN;
-	if (add_mtd_device(&new->mtd)) {
+	if (mtd_device_register(&new->mtd, NULL, 0)) {
 		pr_err("Failed to register new device\n");
 		goto out2;
 	}
@@ -168,35 +141,35 @@ out0:
 	return ret;
 }
 
-static int ustrtoul(const char *cp, char **endp, unsigned int base)
+static int parse_num64(uint64_t *num64, char *token)
 {
-	unsigned long result = simple_strtoul(cp, endp, base);
-
-	switch (**endp) {
-	case 'G':
-		result *= 1024;
-	case 'M':
-		result *= 1024;
-	case 'k':
-		result *= 1024;
+	size_t len;
+	int shift = 0;
+	int ret;
+
+	len = strlen(token);
 	/* By dwmw2 editorial decree, "ki", "Mi" or "Gi" are to be used. */
-		if ((*endp)[1] == 'i')
-			(*endp) += 2;
+	if (len > 2) {
+		if (token[len - 1] == 'i') {
+			switch (token[len - 2]) {
+			case 'G':
+				shift += 10;
+			case 'M':
+				shift += 10;
+			case 'k':
+				shift += 10;
+				token[len - 2] = 0;
+				break;
+			default:
+				return -EINVAL;
+			}
+		}
 	}
-	return result;
-}
-
-static int parse_num32(uint32_t *num32, const char *token)
-{
-	char *endp;
-	unsigned long n;
 
-	n = ustrtoul(token, &endp, 0);
-	if (*endp)
-		return -EINVAL;
+	ret = kstrtou64(token, 0, num64);
+	*num64 <<= shift;
 
-	*num32 = n;
-	return 0;
+	return ret;
 }
 
 static int parse_name(char **pname, const char *token)
@@ -232,13 +205,26 @@ static inline void kill_final_newline(char *str)
 	return 1;		\
 } while (0)
 
-static int phram_setup(const char *val, struct kernel_param *kp)
+#ifndef MODULE
+static int phram_init_called;
+/*
+ * This shall contain the module parameter if any. It is of the form:
+ * - phram=<device>,<address>,<size> for module case
+ * - phram.phram=<device>,<address>,<size> for built-in case
+ * We leave 64 bytes for the device name, 20 for the address and 20 for the
+ * size.
+ * Example: phram.phram=rootfs,0xa0000000,512Mi
+ */
+static char phram_paramline[64 + 20 + 20];
+#endif
+
+static int phram_setup(const char *val)
 {
-	char buf[64+12+12], *str = buf;
+	char buf[64 + 20 + 20], *str = buf;
 	char *token[3];
 	char *name;
-	uint32_t start;
-	uint32_t len;
+	uint64_t start;
+	uint64_t len;
 	int i, ret;
 
 	if (strnlen(val, sizeof(buf)) >= sizeof(buf))
@@ -260,13 +246,13 @@ static int phram_setup(const char *val, struct kernel_param *kp)
 	if (ret)
 		return ret;
 
-	ret = parse_num32(&start, token[1]);
+	ret = parse_num64(&start, token[1]);
 	if (ret) {
 		kfree(name);
 		parse_err("illegal start address\n");
 	}
 
-	ret = parse_num32(&len, token[2]);
+	ret = parse_num64(&len, token[2]);
 	if (ret) {
 		kfree(name);
 		parse_err("illegal device length\n");
@@ -274,18 +260,60 @@ static int phram_setup(const char *val, struct kernel_param *kp)
 
 	ret = register_device(name, start, len);
 	if (!ret)
-		pr_info("%s device: %#x at %#x\n", name, len, start);
+		pr_info("%s device: %#llx at %#llx\n", name, len, start);
+	else
+		kfree(name);
 
 	return ret;
 }
 
-module_param_call(phram, phram_setup, NULL, NULL, 000);
+static int phram_param_call(const char *val, struct kernel_param *kp)
+{
+#ifdef MODULE
+	return phram_setup(val);
+#else
+	/*
+	 * If more parameters are later passed in via
+	 * /sys/module/phram/parameters/phram
+	 * and init_phram() has already been called,
+	 * we can parse the argument now.
+	 */
+
+	if (phram_init_called)
+		return phram_setup(val);
+
+	/*
+	 * During early boot stage, we only save the parameters
+	 * here. We must parse them later: if the param passed
+	 * from kernel boot command line, phram_param_call() is
+	 * called so early that it is not possible to resolve
+	 * the device (even kmalloc() fails). Defer that work to
+	 * phram_setup().
+	 */
+
+	if (strlen(val) >= sizeof(phram_paramline))
+		return -ENOSPC;
+	strcpy(phram_paramline, val);
+
+	return 0;
+#endif
+}
+
+module_param_call(phram, phram_param_call, NULL, NULL, 000);
 MODULE_PARM_DESC(phram, "Memory region to map. \"phram=<name>,<start>,<length>\"");
 
 
 static int __init init_phram(void)
 {
-	return 0;
+	int ret = 0;
+
+#ifndef MODULE
+	if (phram_paramline[0])
+		ret = phram_setup(phram_paramline);
+	phram_init_called = 1;
+#endif
+
+	return ret;
 }
 
 static void __exit cleanup_phram(void)
diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c
index fc8ea0a57ac..f02603e1bfe 100644
--- a/drivers/mtd/devices/pmc551.c
+++ b/drivers/mtd/devices/pmc551.c
@@ -93,15 +93,49 @@
 #include <linux/fs.h>
 #include <linux/ioctl.h>
 #include <asm/io.h>
-#include <asm/system.h>
 #include <linux/pci.h>
-
 #include <linux/mtd/mtd.h>
-#include <linux/mtd/pmc551.h>
-#include <linux/mtd/compatmac.h>
+
+#define PMC551_VERSION \
+	"Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks.\n"
+
+#define PCI_VENDOR_ID_V3_SEMI 0x11b0
+#define PCI_DEVICE_ID_V3_SEMI_V370PDC 0x0200
+
+#define PMC551_PCI_MEM_MAP0 0x50
+#define PMC551_PCI_MEM_MAP1 0x54
+#define PMC551_PCI_MEM_MAP_MAP_ADDR_MASK 0x3ff00000
+#define PMC551_PCI_MEM_MAP_APERTURE_MASK 0x000000f0
+#define PMC551_PCI_MEM_MAP_REG_EN 0x00000002
+#define PMC551_PCI_MEM_MAP_ENABLE 0x00000001
+
+#define PMC551_SDRAM_MA  0x60
+#define PMC551_SDRAM_CMD 0x62
+#define PMC551_DRAM_CFG  0x64
+#define PMC551_SYS_CTRL_REG 0x78
+
+#define PMC551_DRAM_BLK0 0x68
+#define PMC551_DRAM_BLK1 0x6c
+#define PMC551_DRAM_BLK2 0x70
+#define PMC551_DRAM_BLK3 0x74
+#define PMC551_DRAM_BLK_GET_SIZE(x) (524288 << ((x >> 4) & 0x0f))
+#define PMC551_DRAM_BLK_SET_COL_MUX(x, v) (((x) & ~0x00007000) | (((v) & 0x7) << 12))
+#define PMC551_DRAM_BLK_SET_ROW_MUX(x, v) (((x) & ~0x00000f00) | (((v) & 0xf) << 8))
+
+struct mypriv {
+	struct pci_dev *dev;
+	u_char *start;
+	u32 base_map0;
+	u32 curr_map0;
+	u32 asize;
+	struct mtd_info *nextpmc551;
+};
 
 static struct mtd_info *pmc551list;
 
+static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len,
+			size_t *retlen, void **virt, resource_size_t *phys);
+
 static int pmc551_erase(struct mtd_info *mtd, struct erase_info *instr)
 {
 	struct mypriv *priv = mtd->priv;
@@ -117,16 +151,6 @@ static int pmc551_erase(struct mtd_info *mtd, struct erase_info *instr)
 #endif
 
 	end = instr->addr + instr->len - 1;
-
-	/* Is it past the end? */
-	if (end > mtd->size) {
-#ifdef CONFIG_MTD_PMC551_DEBUG
-		printk(KERN_DEBUG "pmc551_erase() out of bounds (%ld > %ld)\n",
-			(long)end, (long)mtd->size);
-#endif
-		return -EINVAL;
-	}
-
 	eoff_hi = end & ~(priv->asize - 1);
 	soff_hi = instr->addr & ~(priv->asize - 1);
 	eoff_lo = end & (priv->asize - 1);
@@ -180,18 +204,6 @@ static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len,
 	printk(KERN_DEBUG "pmc551_point(%ld, %ld)\n", (long)from, (long)len);
 #endif
 
-	if (from + len > mtd->size) {
-#ifdef CONFIG_MTD_PMC551_DEBUG
-		printk(KERN_DEBUG "pmc551_point() out of bounds (%ld > %ld)\n",
-			(long)from + len, (long)mtd->size);
-#endif
-		return -EINVAL;
-	}
-
-	/* can we return a physical address with this driver? */
-	if (phys)
-		return -EINVAL;
-
 	soff_hi = from & ~(priv->asize - 1);
 	soff_lo = from & (priv->asize - 1);
 
@@ -207,11 +219,12 @@ static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len,
 	return 0;
 }
 
-static void pmc551_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
+static int pmc551_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 {
 #ifdef CONFIG_MTD_PMC551_DEBUG
 	printk(KERN_DEBUG "pmc551_unpoint()\n");
 #endif
+	return 0;
 }
 
 static int pmc551_read(struct mtd_info *mtd, loff_t from, size_t len,
@@ -230,16 +243,6 @@ static int pmc551_read(struct mtd_info *mtd, loff_t from, size_t len,
 #endif
 
 	end = from + len - 1;
-
-	/* Is it past the end? */
-	if (end > mtd->size) {
-#ifdef CONFIG_MTD_PMC551_DEBUG
-		printk(KERN_DEBUG "pmc551_read() out of bounds (%ld > %ld)\n",
-			(long)end, (long)mtd->size);
-#endif
-		return -EINVAL;
-	}
-
 	soff_hi = from & ~(priv->asize - 1);
 	eoff_hi = end & ~(priv->asize - 1);
 	soff_lo = from & (priv->asize - 1);
@@ -297,16 +300,6 @@ static int pmc551_write(struct mtd_info *mtd, loff_t to, size_t len,
 #endif
 
 	end = to + len - 1;
-	/* Is it past the end?  or did the u32 wrap? */
-	if (end > mtd->size) {
-#ifdef CONFIG_MTD_PMC551_DEBUG
-		printk(KERN_DEBUG "pmc551_write() out of bounds (end: %ld, "
-			"size: %ld, to: %ld)\n", (long)end, (long)mtd->size,
-			(long)to);
-#endif
-		return -EINVAL;
-	}
-
 	soff_hi = to & ~(priv->asize - 1);
 	eoff_hi = end & ~(priv->asize - 1);
 	soff_lo = to & (priv->asize - 1);
@@ -352,7 +345,7 @@ static int pmc551_write(struct mtd_info *mtd, loff_t to, size_t len,
  * Fixup routines for the V370PDC
  * PCI device ID 0x020011b0
  *
- * This function basicly kick starts the DRAM oboard the card and gets it
+ * This function basically kick starts the DRAM oboard the card and gets it
  * ready to be used.  Before this is done the device reads VERY erratic, so
  * much that it can crash the Linux 2.2.x series kernels when a user cat's
  * /proc/pci .. though that is mainly a kernel bug in handling the PCI DEVSEL
@@ -360,7 +353,7 @@ static int pmc551_write(struct mtd_info *mtd, loff_t to, size_t len,
  * mechanism
  * returns the size of the memory region found.
  */
-static u32 fixup_pmc551(struct pci_dev *dev)
+static int fixup_pmc551(struct pci_dev *dev)
 {
 #ifdef CONFIG_MTD_PMC551_BUGFIX
 	u32 dram_data;
@@ -541,7 +534,7 @@ static u32 fixup_pmc551(struct pci_dev *dev)
 
 	/*
 	 * Check to make certain the DEVSEL is set correctly, this device
-	 * has a tendancy to assert DEVSEL and TRDY when a write is performed
+	 * has a tendency to assert DEVSEL and TRDY when a write is performed
 	 * to the memory when memory is read-only
 	 */
 	if ((cmd & PCI_STATUS_DEVSEL_MASK) != 0x0) {
@@ -670,7 +663,7 @@ static int __init init_pmc551(void)
 	struct mypriv *priv;
 	int found = 0;
 	struct mtd_info *mtd;
-	u32 length = 0;
+	int length = 0;
 
 	if (msize) {
 		msize = (1 << (ffs(msize) - 1)) << 20;
@@ -732,16 +725,11 @@ static int __init init_pmc551(void)
 		}
 
 		mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
-		if (!mtd) {
-			printk(KERN_NOTICE "pmc551: Cannot allocate new MTD "
-				"device.\n");
+		if (!mtd)
 			break;
-		}
 
 		priv = kzalloc(sizeof(struct mypriv), GFP_KERNEL);
 		if (!priv) {
-			printk(KERN_NOTICE "pmc551: Cannot allocate new MTD "
-				"device.\n");
 			kfree(mtd);
 			break;
 		}
@@ -788,18 +776,18 @@ static int __init init_pmc551(void)
 
 		mtd->size = msize;
 		mtd->flags = MTD_CAP_RAM;
-		mtd->erase = pmc551_erase;
-		mtd->read = pmc551_read;
-		mtd->write = pmc551_write;
-		mtd->point = pmc551_point;
-		mtd->unpoint = pmc551_unpoint;
+		mtd->_erase = pmc551_erase;
+		mtd->_read = pmc551_read;
+		mtd->_write = pmc551_write;
+		mtd->_point = pmc551_point;
+		mtd->_unpoint = pmc551_unpoint;
 		mtd->type = MTD_RAM;
 		mtd->name = "PMC551 RAM board";
 		mtd->erasesize = 0x10000;
 		mtd->writesize = 1;
 		mtd->owner = THIS_MODULE;
 
-		if (add_mtd_device(mtd)) {
+		if (mtd_device_register(mtd, NULL, 0)) {
 			printk(KERN_NOTICE "pmc551: Failed to register new device\n");
 			pci_iounmap(PCI_Device, priv->start);
 			kfree(mtd->priv);
@@ -807,7 +795,7 @@ static int __init init_pmc551(void)
 			break;
 		}
 
-		/* Keep a reference as the add_mtd_device worked */
+		/* Keep a reference as the mtd_device_register worked */
 		pci_dev_get(PCI_Device);
 
 		printk(KERN_NOTICE "Registered pmc551 memory device.\n");
@@ -857,7 +845,7 @@ static void __exit cleanup_pmc551(void)
 		pci_dev_put(priv->dev);
 
 		kfree(mtd->priv);
-		del_mtd_device(mtd);
+		mtd_device_unregister(mtd);
 		kfree(mtd);
 		found++;
 	}
diff --git a/drivers/mtd/devices/serial_flash_cmds.h b/drivers/mtd/devices/serial_flash_cmds.h
new file mode 100644
index 00000000000..f59a125295d
--- /dev/null
+++ b/drivers/mtd/devices/serial_flash_cmds.h
@@ -0,0 +1,61 @@
+/*
+ * Generic/SFDP Flash Commands and Device Capabilities
+ *
+ * Copyright (C) 2013 Lee Jones <lee.jones@lianro.org>
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MTD_SERIAL_FLASH_CMDS_H
+#define _MTD_SERIAL_FLASH_CMDS_H
+
+/* Generic Flash Commands/OPCODEs */
+#define SPINOR_OP_RDSR2		0x35
+#define SPINOR_OP_WRVCR		0x81
+#define SPINOR_OP_RDVCR		0x85
+
+/* JEDEC Standard - Serial Flash Discoverable Parmeters (SFDP) Commands */
+#define SPINOR_OP_READ_1_2_2	0xbb	/* DUAL I/O READ */
+#define SPINOR_OP_READ_1_4_4	0xeb	/* QUAD I/O READ */
+
+#define SPINOR_OP_WRITE		0x02	/* PAGE PROGRAM */
+#define SPINOR_OP_WRITE_1_1_2	0xa2	/* DUAL INPUT PROGRAM */
+#define SPINOR_OP_WRITE_1_2_2	0xd2	/* DUAL INPUT EXT PROGRAM */
+#define SPINOR_OP_WRITE_1_1_4	0x32	/* QUAD INPUT PROGRAM */
+#define SPINOR_OP_WRITE_1_4_4	0x12	/* QUAD INPUT EXT PROGRAM */
+
+/* READ commands with 32-bit addressing */
+#define SPINOR_OP_READ4_1_2_2	0xbc
+#define SPINOR_OP_READ4_1_4_4	0xec
+
+/* Configuration flags */
+#define FLASH_FLAG_SINGLE	0x000000ff
+#define FLASH_FLAG_READ_WRITE	0x00000001
+#define FLASH_FLAG_READ_FAST	0x00000002
+#define FLASH_FLAG_SE_4K	0x00000004
+#define FLASH_FLAG_SE_32K	0x00000008
+#define FLASH_FLAG_CE		0x00000010
+#define FLASH_FLAG_32BIT_ADDR	0x00000020
+#define FLASH_FLAG_RESET	0x00000040
+#define FLASH_FLAG_DYB_LOCKING	0x00000080
+
+#define FLASH_FLAG_DUAL		0x0000ff00
+#define FLASH_FLAG_READ_1_1_2	0x00000100
+#define FLASH_FLAG_READ_1_2_2	0x00000200
+#define FLASH_FLAG_READ_2_2_2	0x00000400
+#define FLASH_FLAG_WRITE_1_1_2	0x00001000
+#define FLASH_FLAG_WRITE_1_2_2	0x00002000
+#define FLASH_FLAG_WRITE_2_2_2	0x00004000
+
+#define FLASH_FLAG_QUAD		0x00ff0000
+#define FLASH_FLAG_READ_1_1_4	0x00010000
+#define FLASH_FLAG_READ_1_4_4	0x00020000
+#define FLASH_FLAG_READ_4_4_4	0x00040000
+#define FLASH_FLAG_WRITE_1_1_4	0x00100000
+#define FLASH_FLAG_WRITE_1_4_4	0x00200000
+#define FLASH_FLAG_WRITE_4_4_4	0x00400000
+
+#endif /* _MTD_SERIAL_FLASH_CMDS_H */
diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c
index 592016a0668..2fc4957cbe7 100644
--- a/drivers/mtd/devices/slram.c
+++ b/drivers/mtd/devices/slram.c
@@ -42,7 +42,6 @@
 #include <linux/ioctl.h>
 #include <linux/init.h>
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include <linux/mtd/mtd.h>
 
@@ -76,7 +75,7 @@ static slram_mtd_list_t *slram_mtdlist = NULL;
 static int slram_erase(struct mtd_info *, struct erase_info *);
 static int slram_point(struct mtd_info *, loff_t, size_t, size_t *, void **,
 		resource_size_t *);
-static void slram_unpoint(struct mtd_info *, loff_t, size_t);
+static int slram_unpoint(struct mtd_info *, loff_t, size_t);
 static int slram_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *);
 static int slram_write(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
 
@@ -84,21 +83,13 @@ static int slram_erase(struct mtd_info *mtd, struct erase_info *instr)
 {
 	slram_priv_t *priv = mtd->priv;
 
-	if (instr->addr + instr->len > mtd->size) {
-		return(-EINVAL);
-	}
-
 	memset(priv->start + instr->addr, 0xff, instr->len);
-
 	/* This'll catch a few races. Free the thing before returning :)
 	 * I don't feel at all ashamed. This kind of thing is possible anyway
 	 * with flash, but unlikely.
 	 */
-
 	instr->state = MTD_ERASE_DONE;
-
 	mtd_erase_callback(instr);
-
 	return(0);
 }
 
@@ -107,20 +98,14 @@ static int slram_point(struct mtd_info *mtd, loff_t from, size_t len,
 {
 	slram_priv_t *priv = mtd->priv;
 
-	/* can we return a physical address with this driver? */
-	if (phys)
-		return -EINVAL;
-
-	if (from + len > mtd->size)
-		return -EINVAL;
-
 	*virt = priv->start + from;
 	*retlen = len;
 	return(0);
 }
 
-static void slram_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
+static int slram_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 {
+	return 0;
 }
 
 static int slram_read(struct mtd_info *mtd, loff_t from, size_t len,
@@ -128,14 +113,7 @@ static int slram_read(struct mtd_info *mtd, loff_t from, size_t len,
 {
 	slram_priv_t *priv = mtd->priv;
 
-	if (from > mtd->size)
-		return -EINVAL;
-
-	if (from + len > mtd->size)
-		len = mtd->size - from;
-
 	memcpy(buf, priv->start + from, len);
-
 	*retlen = len;
 	return(0);
 }
@@ -145,11 +123,7 @@ static int slram_write(struct mtd_info *mtd, loff_t to, size_t len,
 {
 	slram_priv_t *priv = mtd->priv;
 
-	if (to + len > mtd->size)
-		return -EINVAL;
-
 	memcpy(priv->start + to, buf, len);
-
 	*retlen = len;
 	return(0);
 }
@@ -200,17 +174,17 @@ static int register_device(char *name, unsigned long start, unsigned long length
 	(*curmtd)->mtdinfo->name = name;
 	(*curmtd)->mtdinfo->size = length;
 	(*curmtd)->mtdinfo->flags = MTD_CAP_RAM;
-        (*curmtd)->mtdinfo->erase = slram_erase;
-	(*curmtd)->mtdinfo->point = slram_point;
-	(*curmtd)->mtdinfo->unpoint = slram_unpoint;
-	(*curmtd)->mtdinfo->read = slram_read;
-	(*curmtd)->mtdinfo->write = slram_write;
+	(*curmtd)->mtdinfo->_erase = slram_erase;
+	(*curmtd)->mtdinfo->_point = slram_point;
+	(*curmtd)->mtdinfo->_unpoint = slram_unpoint;
+	(*curmtd)->mtdinfo->_read = slram_read;
+	(*curmtd)->mtdinfo->_write = slram_write;
 	(*curmtd)->mtdinfo->owner = THIS_MODULE;
 	(*curmtd)->mtdinfo->type = MTD_RAM;
 	(*curmtd)->mtdinfo->erasesize = SLRAM_BLK_SZ;
 	(*curmtd)->mtdinfo->writesize = 1;
 
-	if (add_mtd_device((*curmtd)->mtdinfo))	{
+	if (mtd_device_register((*curmtd)->mtdinfo, NULL, 0))	{
 		E("slram: Failed to register new device\n");
 		iounmap(((slram_priv_t *)(*curmtd)->mtdinfo->priv)->start);
 		kfree((*curmtd)->mtdinfo->priv);
@@ -231,7 +205,7 @@ static void unregister_devices(void)
 
 	while (slram_mtdlist) {
 		nextitem = slram_mtdlist->next;
-		del_mtd_device(slram_mtdlist->mtdinfo);
+		mtd_device_unregister(slram_mtdlist->mtdinfo);
 		iounmap(((slram_priv_t *)slram_mtdlist->mtdinfo->priv)->start);
 		kfree(slram_mtdlist->mtdinfo->priv);
 		kfree(slram_mtdlist->mtdinfo);
@@ -266,7 +240,7 @@ static int parse_cmdline(char *devname, char *szstart, char *szlength)
 
 	if (*(szlength) != '+') {
 		devlength = simple_strtoul(szlength, &buffer, 0);
-		devlength = handle_unit(devlength, buffer) - devstart;
+		devlength = handle_unit(devlength, buffer);
 		if (devlength < devstart)
 			goto err_out;
 
@@ -306,14 +280,11 @@ __setup("slram=", mtd_slram_setup);
 static int __init init_slram(void)
 {
 	char *devname;
-	int i;
 
 #ifndef MODULE
 	char *devstart;
 	char *devlength;
 
-	i = 0;
-
 	if (!map) {
 		E("slram: not enough parameters.\n");
 		return(-EINVAL);
@@ -340,6 +311,7 @@ static int __init init_slram(void)
 	}
 #else
 	int count;
+	int i;
 
 	for (count = 0; count < SLRAM_MAX_DEVICES_PARAMS && map[count];
 			count++) {
diff --git a/drivers/mtd/devices/spear_smi.c b/drivers/mtd/devices/spear_smi.c
new file mode 100644
index 00000000000..c4176b0f382
--- /dev/null
+++ b/drivers/mtd/devices/spear_smi.c
@@ -0,0 +1,1093 @@
+/*
+ * SMI (Serial Memory Controller) device driver for Serial NOR Flash on
+ * SPEAr platform
+ * The serial nor interface is largely based on drivers/mtd/m25p80.c,
+ * however the SPI interface has been replaced by SMI.
+ *
+ * Copyright © 2010 STMicroelectronics.
+ * Ashish Priyadarshi
+ * Shiraz Hashim <shiraz.linux.kernel@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/spear_smi.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/wait.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+/* SMI clock rate */
+#define SMI_MAX_CLOCK_FREQ	50000000 /* 50 MHz */
+
+/* MAX time out to safely come out of a erase or write busy conditions */
+#define SMI_PROBE_TIMEOUT	(HZ / 10)
+#define SMI_MAX_TIME_OUT	(3 * HZ)
+
+/* timeout for command completion */
+#define SMI_CMD_TIMEOUT		(HZ / 10)
+
+/* registers of smi */
+#define SMI_CR1		0x0	/* SMI control register 1 */
+#define SMI_CR2		0x4	/* SMI control register 2 */
+#define SMI_SR		0x8	/* SMI status register */
+#define SMI_TR		0xC	/* SMI transmit register */
+#define SMI_RR		0x10	/* SMI receive register */
+
+/* defines for control_reg 1 */
+#define BANK_EN		(0xF << 0)	/* enables all banks */
+#define DSEL_TIME	(0x6 << 4)	/* Deselect time 6 + 1 SMI_CK periods */
+#define SW_MODE		(0x1 << 28)	/* enables SW Mode */
+#define WB_MODE		(0x1 << 29)	/* Write Burst Mode */
+#define FAST_MODE	(0x1 << 15)	/* Fast Mode */
+#define HOLD1		(0x1 << 16)	/* Clock Hold period selection */
+
+/* defines for control_reg 2 */
+#define SEND		(0x1 << 7)	/* Send data */
+#define TFIE		(0x1 << 8)	/* Transmission Flag Interrupt Enable */
+#define WCIE		(0x1 << 9)	/* Write Complete Interrupt Enable */
+#define RD_STATUS_REG	(0x1 << 10)	/* reads status reg */
+#define WE		(0x1 << 11)	/* Write Enable */
+
+#define TX_LEN_SHIFT	0
+#define RX_LEN_SHIFT	4
+#define BANK_SHIFT	12
+
+/* defines for status register */
+#define SR_WIP		0x1	/* Write in progress */
+#define SR_WEL		0x2	/* Write enable latch */
+#define SR_BP0		0x4	/* Block protect 0 */
+#define SR_BP1		0x8	/* Block protect 1 */
+#define SR_BP2		0x10	/* Block protect 2 */
+#define SR_SRWD		0x80	/* SR write protect */
+#define TFF		0x100	/* Transfer Finished Flag */
+#define WCF		0x200	/* Transfer Finished Flag */
+#define ERF1		0x400	/* Forbidden Write Request */
+#define ERF2		0x800	/* Forbidden Access */
+
+#define WM_SHIFT	12
+
+/* flash opcodes */
+#define OPCODE_RDID	0x9f	/* Read JEDEC ID */
+
+/* Flash Device Ids maintenance section */
+
+/* data structure to maintain flash ids from different vendors */
+struct flash_device {
+	char *name;
+	u8 erase_cmd;
+	u32 device_id;
+	u32 pagesize;
+	unsigned long sectorsize;
+	unsigned long size_in_bytes;
+};
+
+#define FLASH_ID(n, es, id, psize, ssize, size)	\
+{				\
+	.name = n,		\
+	.erase_cmd = es,	\
+	.device_id = id,	\
+	.pagesize = psize,	\
+	.sectorsize = ssize,	\
+	.size_in_bytes = size	\
+}
+
+static struct flash_device flash_devices[] = {
+	FLASH_ID("st m25p16"     , 0xd8, 0x00152020, 0x100, 0x10000, 0x200000),
+	FLASH_ID("st m25p32"     , 0xd8, 0x00162020, 0x100, 0x10000, 0x400000),
+	FLASH_ID("st m25p64"     , 0xd8, 0x00172020, 0x100, 0x10000, 0x800000),
+	FLASH_ID("st m25p128"    , 0xd8, 0x00182020, 0x100, 0x40000, 0x1000000),
+	FLASH_ID("st m25p05"     , 0xd8, 0x00102020, 0x80 , 0x8000 , 0x10000),
+	FLASH_ID("st m25p10"     , 0xd8, 0x00112020, 0x80 , 0x8000 , 0x20000),
+	FLASH_ID("st m25p20"     , 0xd8, 0x00122020, 0x100, 0x10000, 0x40000),
+	FLASH_ID("st m25p40"     , 0xd8, 0x00132020, 0x100, 0x10000, 0x80000),
+	FLASH_ID("st m25p80"     , 0xd8, 0x00142020, 0x100, 0x10000, 0x100000),
+	FLASH_ID("st m45pe10"    , 0xd8, 0x00114020, 0x100, 0x10000, 0x20000),
+	FLASH_ID("st m45pe20"    , 0xd8, 0x00124020, 0x100, 0x10000, 0x40000),
+	FLASH_ID("st m45pe40"    , 0xd8, 0x00134020, 0x100, 0x10000, 0x80000),
+	FLASH_ID("st m45pe80"    , 0xd8, 0x00144020, 0x100, 0x10000, 0x100000),
+	FLASH_ID("sp s25fl004"   , 0xd8, 0x00120201, 0x100, 0x10000, 0x80000),
+	FLASH_ID("sp s25fl008"   , 0xd8, 0x00130201, 0x100, 0x10000, 0x100000),
+	FLASH_ID("sp s25fl016"   , 0xd8, 0x00140201, 0x100, 0x10000, 0x200000),
+	FLASH_ID("sp s25fl032"   , 0xd8, 0x00150201, 0x100, 0x10000, 0x400000),
+	FLASH_ID("sp s25fl064"   , 0xd8, 0x00160201, 0x100, 0x10000, 0x800000),
+	FLASH_ID("atmel 25f512"  , 0x52, 0x0065001F, 0x80 , 0x8000 , 0x10000),
+	FLASH_ID("atmel 25f1024" , 0x52, 0x0060001F, 0x100, 0x8000 , 0x20000),
+	FLASH_ID("atmel 25f2048" , 0x52, 0x0063001F, 0x100, 0x10000, 0x40000),
+	FLASH_ID("atmel 25f4096" , 0x52, 0x0064001F, 0x100, 0x10000, 0x80000),
+	FLASH_ID("atmel 25fs040" , 0xd7, 0x0004661F, 0x100, 0x10000, 0x80000),
+	FLASH_ID("mac 25l512"    , 0xd8, 0x001020C2, 0x010, 0x10000, 0x10000),
+	FLASH_ID("mac 25l1005"   , 0xd8, 0x001120C2, 0x010, 0x10000, 0x20000),
+	FLASH_ID("mac 25l2005"   , 0xd8, 0x001220C2, 0x010, 0x10000, 0x40000),
+	FLASH_ID("mac 25l4005"   , 0xd8, 0x001320C2, 0x010, 0x10000, 0x80000),
+	FLASH_ID("mac 25l4005a"  , 0xd8, 0x001320C2, 0x010, 0x10000, 0x80000),
+	FLASH_ID("mac 25l8005"   , 0xd8, 0x001420C2, 0x010, 0x10000, 0x100000),
+	FLASH_ID("mac 25l1605"   , 0xd8, 0x001520C2, 0x100, 0x10000, 0x200000),
+	FLASH_ID("mac 25l1605a"  , 0xd8, 0x001520C2, 0x010, 0x10000, 0x200000),
+	FLASH_ID("mac 25l3205"   , 0xd8, 0x001620C2, 0x100, 0x10000, 0x400000),
+	FLASH_ID("mac 25l3205a"  , 0xd8, 0x001620C2, 0x100, 0x10000, 0x400000),
+	FLASH_ID("mac 25l6405"   , 0xd8, 0x001720C2, 0x100, 0x10000, 0x800000),
+};
+
+/* Define spear specific structures */
+
+struct spear_snor_flash;
+
+/**
+ * struct spear_smi - Structure for SMI Device
+ *
+ * @clk: functional clock
+ * @status: current status register of SMI.
+ * @clk_rate: functional clock rate of SMI (default: SMI_MAX_CLOCK_FREQ)
+ * @lock: lock to prevent parallel access of SMI.
+ * @io_base: base address for registers of SMI.
+ * @pdev: platform device
+ * @cmd_complete: queue to wait for command completion of NOR-flash.
+ * @num_flashes: number of flashes actually present on board.
+ * @flash: separate structure for each Serial NOR-flash attached to SMI.
+ */
+struct spear_smi {
+	struct clk *clk;
+	u32 status;
+	unsigned long clk_rate;
+	struct mutex lock;
+	void __iomem *io_base;
+	struct platform_device *pdev;
+	wait_queue_head_t cmd_complete;
+	u32 num_flashes;
+	struct spear_snor_flash *flash[MAX_NUM_FLASH_CHIP];
+};
+
+/**
+ * struct spear_snor_flash - Structure for Serial NOR Flash
+ *
+ * @bank: Bank number(0, 1, 2, 3) for each NOR-flash.
+ * @dev_id: Device ID of NOR-flash.
+ * @lock: lock to manage flash read, write and erase operations
+ * @mtd: MTD info for each NOR-flash.
+ * @num_parts: Total number of partition in each bank of NOR-flash.
+ * @parts: Partition info for each bank of NOR-flash.
+ * @page_size: Page size of NOR-flash.
+ * @base_addr: Base address of NOR-flash.
+ * @erase_cmd: erase command may vary on different flash types
+ * @fast_mode: flash supports read in fast mode
+ */
+struct spear_snor_flash {
+	u32 bank;
+	u32 dev_id;
+	struct mutex lock;
+	struct mtd_info mtd;
+	u32 num_parts;
+	struct mtd_partition *parts;
+	u32 page_size;
+	void __iomem *base_addr;
+	u8 erase_cmd;
+	u8 fast_mode;
+};
+
+static inline struct spear_snor_flash *get_flash_data(struct mtd_info *mtd)
+{
+	return container_of(mtd, struct spear_snor_flash, mtd);
+}
+
+/**
+ * spear_smi_read_sr - Read status register of flash through SMI
+ * @dev: structure of SMI information.
+ * @bank: bank to which flash is connected
+ *
+ * This routine will return the status register of the flash chip present at the
+ * given bank.
+ */
+static int spear_smi_read_sr(struct spear_smi *dev, u32 bank)
+{
+	int ret;
+	u32 ctrlreg1;
+
+	mutex_lock(&dev->lock);
+	dev->status = 0; /* Will be set in interrupt handler */
+
+	ctrlreg1 = readl(dev->io_base + SMI_CR1);
+	/* program smi in hw mode */
+	writel(ctrlreg1 & ~(SW_MODE | WB_MODE), dev->io_base + SMI_CR1);
+
+	/* performing a rsr instruction in hw mode */
+	writel((bank << BANK_SHIFT) | RD_STATUS_REG | TFIE,
+			dev->io_base + SMI_CR2);
+
+	/* wait for tff */
+	ret = wait_event_interruptible_timeout(dev->cmd_complete,
+			dev->status & TFF, SMI_CMD_TIMEOUT);
+
+	/* copy dev->status (lower 16 bits) in order to release lock */
+	if (ret > 0)
+		ret = dev->status & 0xffff;
+	else if (ret == 0)
+		ret = -ETIMEDOUT;
+
+	/* restore the ctrl regs state */
+	writel(ctrlreg1, dev->io_base + SMI_CR1);
+	writel(0, dev->io_base + SMI_CR2);
+	mutex_unlock(&dev->lock);
+
+	return ret;
+}
+
+/**
+ * spear_smi_wait_till_ready - wait till flash is ready
+ * @dev: structure of SMI information.
+ * @bank: flash corresponding to this bank
+ * @timeout: timeout for busy wait condition
+ *
+ * This routine checks for WIP (write in progress) bit in Status register
+ * If successful the routine returns 0 else -EBUSY
+ */
+static int spear_smi_wait_till_ready(struct spear_smi *dev, u32 bank,
+		unsigned long timeout)
+{
+	unsigned long finish;
+	int status;
+
+	finish = jiffies + timeout;
+	do {
+		status = spear_smi_read_sr(dev, bank);
+		if (status < 0) {
+			if (status == -ETIMEDOUT)
+				continue; /* try till finish */
+			return status;
+		} else if (!(status & SR_WIP)) {
+			return 0;
+		}
+
+		cond_resched();
+	} while (!time_after_eq(jiffies, finish));
+
+	dev_err(&dev->pdev->dev, "smi controller is busy, timeout\n");
+	return -EBUSY;
+}
+
+/**
+ * spear_smi_int_handler - SMI Interrupt Handler.
+ * @irq: irq number
+ * @dev_id: structure of SMI device, embedded in dev_id.
+ *
+ * The handler clears all interrupt conditions and records the status in
+ * dev->status which is used by the driver later.
+ */
+static irqreturn_t spear_smi_int_handler(int irq, void *dev_id)
+{
+	u32 status = 0;
+	struct spear_smi *dev = dev_id;
+
+	status = readl(dev->io_base + SMI_SR);
+
+	if (unlikely(!status))
+		return IRQ_NONE;
+
+	/* clear all interrupt conditions */
+	writel(0, dev->io_base + SMI_SR);
+
+	/* copy the status register in dev->status */
+	dev->status |= status;
+
+	/* send the completion */
+	wake_up_interruptible(&dev->cmd_complete);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * spear_smi_hw_init - initializes the smi controller.
+ * @dev: structure of smi device
+ *
+ * this routine initializes the smi controller wit the default values
+ */
+static void spear_smi_hw_init(struct spear_smi *dev)
+{
+	unsigned long rate = 0;
+	u32 prescale = 0;
+	u32 val;
+
+	rate = clk_get_rate(dev->clk);
+
+	/* functional clock of smi */
+	prescale = DIV_ROUND_UP(rate, dev->clk_rate);
+
+	/*
+	 * setting the standard values, fast mode, prescaler for
+	 * SMI_MAX_CLOCK_FREQ (50MHz) operation and bank enable
+	 */
+	val = HOLD1 | BANK_EN | DSEL_TIME | (prescale << 8);
+
+	mutex_lock(&dev->lock);
+	/* clear all interrupt conditions */
+	writel(0, dev->io_base + SMI_SR);
+
+	writel(val, dev->io_base + SMI_CR1);
+	mutex_unlock(&dev->lock);
+}
+
+/**
+ * get_flash_index - match chip id from a flash list.
+ * @flash_id: a valid nor flash chip id obtained from board.
+ *
+ * try to validate the chip id by matching from a list, if not found then simply
+ * returns negative. In case of success returns index in to the flash devices
+ * array.
+ */
+static int get_flash_index(u32 flash_id)
+{
+	int index;
+
+	/* Matches chip-id to entire list of 'serial-nor flash' ids */
+	for (index = 0; index < ARRAY_SIZE(flash_devices); index++) {
+		if (flash_devices[index].device_id == flash_id)
+			return index;
+	}
+
+	/* Memory chip is not listed and not supported */
+	return -ENODEV;
+}
+
+/**
+ * spear_smi_write_enable - Enable the flash to do write operation
+ * @dev: structure of SMI device
+ * @bank: enable write for flash connected to this bank
+ *
+ * Set write enable latch with Write Enable command.
+ * Returns 0 on success.
+ */
+static int spear_smi_write_enable(struct spear_smi *dev, u32 bank)
+{
+	int ret;
+	u32 ctrlreg1;
+
+	mutex_lock(&dev->lock);
+	dev->status = 0; /* Will be set in interrupt handler */
+
+	ctrlreg1 = readl(dev->io_base + SMI_CR1);
+	/* program smi in h/w mode */
+	writel(ctrlreg1 & ~SW_MODE, dev->io_base + SMI_CR1);
+
+	/* give the flash, write enable command */
+	writel((bank << BANK_SHIFT) | WE | TFIE, dev->io_base + SMI_CR2);
+
+	ret = wait_event_interruptible_timeout(dev->cmd_complete,
+			dev->status & TFF, SMI_CMD_TIMEOUT);
+
+	/* restore the ctrl regs state */
+	writel(ctrlreg1, dev->io_base + SMI_CR1);
+	writel(0, dev->io_base + SMI_CR2);
+
+	if (ret == 0) {
+		ret = -EIO;
+		dev_err(&dev->pdev->dev,
+			"smi controller failed on write enable\n");
+	} else if (ret > 0) {
+		/* check whether write mode status is set for required bank */
+		if (dev->status & (1 << (bank + WM_SHIFT)))
+			ret = 0;
+		else {
+			dev_err(&dev->pdev->dev, "couldn't enable write\n");
+			ret = -EIO;
+		}
+	}
+
+	mutex_unlock(&dev->lock);
+	return ret;
+}
+
+static inline u32
+get_sector_erase_cmd(struct spear_snor_flash *flash, u32 offset)
+{
+	u32 cmd;
+	u8 *x = (u8 *)&cmd;
+
+	x[0] = flash->erase_cmd;
+	x[1] = offset >> 16;
+	x[2] = offset >> 8;
+	x[3] = offset;
+
+	return cmd;
+}
+
+/**
+ * spear_smi_erase_sector - erase one sector of flash
+ * @dev: structure of SMI information
+ * @command: erase command to be send
+ * @bank: bank to which this command needs to be send
+ * @bytes: size of command
+ *
+ * Erase one sector of flash memory at offset ``offset'' which is any
+ * address within the sector which should be erased.
+ * Returns 0 if successful, non-zero otherwise.
+ */
+static int spear_smi_erase_sector(struct spear_smi *dev,
+		u32 bank, u32 command, u32 bytes)
+{
+	u32 ctrlreg1 = 0;
+	int ret;
+
+	ret = spear_smi_wait_till_ready(dev, bank, SMI_MAX_TIME_OUT);
+	if (ret)
+		return ret;
+
+	ret = spear_smi_write_enable(dev, bank);
+	if (ret)
+		return ret;
+
+	mutex_lock(&dev->lock);
+
+	ctrlreg1 = readl(dev->io_base + SMI_CR1);
+	writel((ctrlreg1 | SW_MODE) & ~WB_MODE, dev->io_base + SMI_CR1);
+
+	/* send command in sw mode */
+	writel(command, dev->io_base + SMI_TR);
+
+	writel((bank << BANK_SHIFT) | SEND | TFIE | (bytes << TX_LEN_SHIFT),
+			dev->io_base + SMI_CR2);
+
+	ret = wait_event_interruptible_timeout(dev->cmd_complete,
+			dev->status & TFF, SMI_CMD_TIMEOUT);
+
+	if (ret == 0) {
+		ret = -EIO;
+		dev_err(&dev->pdev->dev, "sector erase failed\n");
+	} else if (ret > 0)
+		ret = 0; /* success */
+
+	/* restore ctrl regs */
+	writel(ctrlreg1, dev->io_base + SMI_CR1);
+	writel(0, dev->io_base + SMI_CR2);
+
+	mutex_unlock(&dev->lock);
+	return ret;
+}
+
+/**
+ * spear_mtd_erase - perform flash erase operation as requested by user
+ * @mtd: Provides the memory characteristics
+ * @e_info: Provides the erase information
+ *
+ * Erase an address range on the flash chip. The address range may extend
+ * one or more erase sectors. Return an error is there is a problem erasing.
+ */
+static int spear_mtd_erase(struct mtd_info *mtd, struct erase_info *e_info)
+{
+	struct spear_snor_flash *flash = get_flash_data(mtd);
+	struct spear_smi *dev = mtd->priv;
+	u32 addr, command, bank;
+	int len, ret;
+
+	if (!flash || !dev)
+		return -ENODEV;
+
+	bank = flash->bank;
+	if (bank > dev->num_flashes - 1) {
+		dev_err(&dev->pdev->dev, "Invalid Bank Num");
+		return -EINVAL;
+	}
+
+	addr = e_info->addr;
+	len = e_info->len;
+
+	mutex_lock(&flash->lock);
+
+	/* now erase sectors in loop */
+	while (len) {
+		command = get_sector_erase_cmd(flash, addr);
+		/* preparing the command for flash */
+		ret = spear_smi_erase_sector(dev, bank, command, 4);
+		if (ret) {
+			e_info->state = MTD_ERASE_FAILED;
+			mutex_unlock(&flash->lock);
+			return ret;
+		}
+		addr += mtd->erasesize;
+		len -= mtd->erasesize;
+	}
+
+	mutex_unlock(&flash->lock);
+	e_info->state = MTD_ERASE_DONE;
+	mtd_erase_callback(e_info);
+
+	return 0;
+}
+
+/**
+ * spear_mtd_read - performs flash read operation as requested by the user
+ * @mtd: MTD information of the memory bank
+ * @from: Address from which to start read
+ * @len: Number of bytes to be read
+ * @retlen: Fills the Number of bytes actually read
+ * @buf: Fills this after reading
+ *
+ * Read an address range from the flash chip. The address range
+ * may be any size provided it is within the physical boundaries.
+ * Returns 0 on success, non zero otherwise
+ */
+static int spear_mtd_read(struct mtd_info *mtd, loff_t from, size_t len,
+		size_t *retlen, u8 *buf)
+{
+	struct spear_snor_flash *flash = get_flash_data(mtd);
+	struct spear_smi *dev = mtd->priv;
+	void __iomem *src;
+	u32 ctrlreg1, val;
+	int ret;
+
+	if (!flash || !dev)
+		return -ENODEV;
+
+	if (flash->bank > dev->num_flashes - 1) {
+		dev_err(&dev->pdev->dev, "Invalid Bank Num");
+		return -EINVAL;
+	}
+
+	/* select address as per bank number */
+	src = flash->base_addr + from;
+
+	mutex_lock(&flash->lock);
+
+	/* wait till previous write/erase is done. */
+	ret = spear_smi_wait_till_ready(dev, flash->bank, SMI_MAX_TIME_OUT);
+	if (ret) {
+		mutex_unlock(&flash->lock);
+		return ret;
+	}
+
+	mutex_lock(&dev->lock);
+	/* put smi in hw mode not wbt mode */
+	ctrlreg1 = val = readl(dev->io_base + SMI_CR1);
+	val &= ~(SW_MODE | WB_MODE);
+	if (flash->fast_mode)
+		val |= FAST_MODE;
+
+	writel(val, dev->io_base + SMI_CR1);
+
+	memcpy_fromio(buf, src, len);
+
+	/* restore ctrl reg1 */
+	writel(ctrlreg1, dev->io_base + SMI_CR1);
+	mutex_unlock(&dev->lock);
+
+	*retlen = len;
+	mutex_unlock(&flash->lock);
+
+	return 0;
+}
+
+static inline int spear_smi_cpy_toio(struct spear_smi *dev, u32 bank,
+		void __iomem *dest, const void *src, size_t len)
+{
+	int ret;
+	u32 ctrlreg1;
+
+	/* wait until finished previous write command. */
+	ret = spear_smi_wait_till_ready(dev, bank, SMI_MAX_TIME_OUT);
+	if (ret)
+		return ret;
+
+	/* put smi in write enable */
+	ret = spear_smi_write_enable(dev, bank);
+	if (ret)
+		return ret;
+
+	/* put smi in hw, write burst mode */
+	mutex_lock(&dev->lock);
+
+	ctrlreg1 = readl(dev->io_base + SMI_CR1);
+	writel((ctrlreg1 | WB_MODE) & ~SW_MODE, dev->io_base + SMI_CR1);
+
+	memcpy_toio(dest, src, len);
+
+	writel(ctrlreg1, dev->io_base + SMI_CR1);
+
+	mutex_unlock(&dev->lock);
+	return 0;
+}
+
+/**
+ * spear_mtd_write - performs write operation as requested by the user.
+ * @mtd: MTD information of the memory bank.
+ * @to:	Address to write.
+ * @len: Number of bytes to be written.
+ * @retlen: Number of bytes actually wrote.
+ * @buf: Buffer from which the data to be taken.
+ *
+ * Write an address range to the flash chip. Data must be written in
+ * flash_page_size chunks. The address range may be any size provided
+ * it is within the physical boundaries.
+ * Returns 0 on success, non zero otherwise
+ */
+static int spear_mtd_write(struct mtd_info *mtd, loff_t to, size_t len,
+		size_t *retlen, const u8 *buf)
+{
+	struct spear_snor_flash *flash = get_flash_data(mtd);
+	struct spear_smi *dev = mtd->priv;
+	void __iomem *dest;
+	u32 page_offset, page_size;
+	int ret;
+
+	if (!flash || !dev)
+		return -ENODEV;
+
+	if (flash->bank > dev->num_flashes - 1) {
+		dev_err(&dev->pdev->dev, "Invalid Bank Num");
+		return -EINVAL;
+	}
+
+	/* select address as per bank number */
+	dest = flash->base_addr + to;
+	mutex_lock(&flash->lock);
+
+	page_offset = (u32)to % flash->page_size;
+
+	/* do if all the bytes fit onto one page */
+	if (page_offset + len <= flash->page_size) {
+		ret = spear_smi_cpy_toio(dev, flash->bank, dest, buf, len);
+		if (!ret)
+			*retlen += len;
+	} else {
+		u32 i;
+
+		/* the size of data remaining on the first page */
+		page_size = flash->page_size - page_offset;
+
+		ret = spear_smi_cpy_toio(dev, flash->bank, dest, buf,
+				page_size);
+		if (ret)
+			goto err_write;
+		else
+			*retlen += page_size;
+
+		/* write everything in pagesize chunks */
+		for (i = page_size; i < len; i += page_size) {
+			page_size = len - i;
+			if (page_size > flash->page_size)
+				page_size = flash->page_size;
+
+			ret = spear_smi_cpy_toio(dev, flash->bank, dest + i,
+					buf + i, page_size);
+			if (ret)
+				break;
+			else
+				*retlen += page_size;
+		}
+	}
+
+err_write:
+	mutex_unlock(&flash->lock);
+
+	return ret;
+}
+
+/**
+ * spear_smi_probe_flash - Detects the NOR Flash chip.
+ * @dev: structure of SMI information.
+ * @bank: bank on which flash must be probed
+ *
+ * This routine will check whether there exists a flash chip on a given memory
+ * bank ID.
+ * Return index of the probed flash in flash devices structure
+ */
+static int spear_smi_probe_flash(struct spear_smi *dev, u32 bank)
+{
+	int ret;
+	u32 val = 0;
+
+	ret = spear_smi_wait_till_ready(dev, bank, SMI_PROBE_TIMEOUT);
+	if (ret)
+		return ret;
+
+	mutex_lock(&dev->lock);
+
+	dev->status = 0; /* Will be set in interrupt handler */
+	/* put smi in sw mode */
+	val = readl(dev->io_base + SMI_CR1);
+	writel(val | SW_MODE, dev->io_base + SMI_CR1);
+
+	/* send readid command in sw mode */
+	writel(OPCODE_RDID, dev->io_base + SMI_TR);
+
+	val = (bank << BANK_SHIFT) | SEND | (1 << TX_LEN_SHIFT) |
+		(3 << RX_LEN_SHIFT) | TFIE;
+	writel(val, dev->io_base + SMI_CR2);
+
+	/* wait for TFF */
+	ret = wait_event_interruptible_timeout(dev->cmd_complete,
+			dev->status & TFF, SMI_CMD_TIMEOUT);
+	if (ret <= 0) {
+		ret = -ENODEV;
+		goto err_probe;
+	}
+
+	/* get memory chip id */
+	val = readl(dev->io_base + SMI_RR);
+	val &= 0x00ffffff;
+	ret = get_flash_index(val);
+
+err_probe:
+	/* clear sw mode */
+	val = readl(dev->io_base + SMI_CR1);
+	writel(val & ~SW_MODE, dev->io_base + SMI_CR1);
+
+	mutex_unlock(&dev->lock);
+	return ret;
+}
+
+
+#ifdef CONFIG_OF
+static int spear_smi_probe_config_dt(struct platform_device *pdev,
+				     struct device_node *np)
+{
+	struct spear_smi_plat_data *pdata = dev_get_platdata(&pdev->dev);
+	struct device_node *pp = NULL;
+	const __be32 *addr;
+	u32 val;
+	int len;
+	int i = 0;
+
+	if (!np)
+		return -ENODEV;
+
+	of_property_read_u32(np, "clock-rate", &val);
+	pdata->clk_rate = val;
+
+	pdata->board_flash_info = devm_kzalloc(&pdev->dev,
+					       sizeof(*pdata->board_flash_info),
+					       GFP_KERNEL);
+
+	/* Fill structs for each subnode (flash device) */
+	while ((pp = of_get_next_child(np, pp))) {
+		struct spear_smi_flash_info *flash_info;
+
+		flash_info = &pdata->board_flash_info[i];
+		pdata->np[i] = pp;
+
+		/* Read base-addr and size from DT */
+		addr = of_get_property(pp, "reg", &len);
+		pdata->board_flash_info->mem_base = be32_to_cpup(&addr[0]);
+		pdata->board_flash_info->size = be32_to_cpup(&addr[1]);
+
+		if (of_get_property(pp, "st,smi-fast-mode", NULL))
+			pdata->board_flash_info->fast_mode = 1;
+
+		i++;
+	}
+
+	pdata->num_flashes = i;
+
+	return 0;
+}
+#else
+static int spear_smi_probe_config_dt(struct platform_device *pdev,
+				     struct device_node *np)
+{
+	return -ENOSYS;
+}
+#endif
+
+static int spear_smi_setup_banks(struct platform_device *pdev,
+				 u32 bank, struct device_node *np)
+{
+	struct spear_smi *dev = platform_get_drvdata(pdev);
+	struct mtd_part_parser_data ppdata = {};
+	struct spear_smi_flash_info *flash_info;
+	struct spear_smi_plat_data *pdata;
+	struct spear_snor_flash *flash;
+	struct mtd_partition *parts = NULL;
+	int count = 0;
+	int flash_index;
+	int ret = 0;
+
+	pdata = dev_get_platdata(&pdev->dev);
+	if (bank > pdata->num_flashes - 1)
+		return -EINVAL;
+
+	flash_info = &pdata->board_flash_info[bank];
+	if (!flash_info)
+		return -ENODEV;
+
+	flash = devm_kzalloc(&pdev->dev, sizeof(*flash), GFP_ATOMIC);
+	if (!flash)
+		return -ENOMEM;
+	flash->bank = bank;
+	flash->fast_mode = flash_info->fast_mode ? 1 : 0;
+	mutex_init(&flash->lock);
+
+	/* verify whether nor flash is really present on board */
+	flash_index = spear_smi_probe_flash(dev, bank);
+	if (flash_index < 0) {
+		dev_info(&dev->pdev->dev, "smi-nor%d not found\n", bank);
+		return flash_index;
+	}
+	/* map the memory for nor flash chip */
+	flash->base_addr = devm_ioremap(&pdev->dev, flash_info->mem_base,
+					flash_info->size);
+	if (!flash->base_addr)
+		return -EIO;
+
+	dev->flash[bank] = flash;
+	flash->mtd.priv = dev;
+
+	if (flash_info->name)
+		flash->mtd.name = flash_info->name;
+	else
+		flash->mtd.name = flash_devices[flash_index].name;
+
+	flash->mtd.type = MTD_NORFLASH;
+	flash->mtd.writesize = 1;
+	flash->mtd.flags = MTD_CAP_NORFLASH;
+	flash->mtd.size = flash_info->size;
+	flash->mtd.erasesize = flash_devices[flash_index].sectorsize;
+	flash->page_size = flash_devices[flash_index].pagesize;
+	flash->mtd.writebufsize = flash->page_size;
+	flash->erase_cmd = flash_devices[flash_index].erase_cmd;
+	flash->mtd._erase = spear_mtd_erase;
+	flash->mtd._read = spear_mtd_read;
+	flash->mtd._write = spear_mtd_write;
+	flash->dev_id = flash_devices[flash_index].device_id;
+
+	dev_info(&dev->pdev->dev, "mtd .name=%s .size=%llx(%lluM)\n",
+			flash->mtd.name, flash->mtd.size,
+			flash->mtd.size / (1024 * 1024));
+
+	dev_info(&dev->pdev->dev, ".erasesize = 0x%x(%uK)\n",
+			flash->mtd.erasesize, flash->mtd.erasesize / 1024);
+
+#ifndef CONFIG_OF
+	if (flash_info->partitions) {
+		parts = flash_info->partitions;
+		count = flash_info->nr_partitions;
+	}
+#endif
+	ppdata.of_node = np;
+
+	ret = mtd_device_parse_register(&flash->mtd, NULL, &ppdata, parts,
+					count);
+	if (ret) {
+		dev_err(&dev->pdev->dev, "Err MTD partition=%d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * spear_smi_probe - Entry routine
+ * @pdev: platform device structure
+ *
+ * This is the first routine which gets invoked during booting and does all
+ * initialization/allocation work. The routine looks for available memory banks,
+ * and do proper init for any found one.
+ * Returns 0 on success, non zero otherwise
+ */
+static int spear_smi_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct spear_smi_plat_data *pdata = NULL;
+	struct spear_smi *dev;
+	struct resource *smi_base;
+	int irq, ret = 0;
+	int i;
+
+	if (np) {
+		pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+		if (!pdata) {
+			ret = -ENOMEM;
+			goto err;
+		}
+		pdev->dev.platform_data = pdata;
+		ret = spear_smi_probe_config_dt(pdev, np);
+		if (ret) {
+			ret = -ENODEV;
+			dev_err(&pdev->dev, "no platform data\n");
+			goto err;
+		}
+	} else {
+		pdata = dev_get_platdata(&pdev->dev);
+		if (!pdata) {
+			ret = -ENODEV;
+			dev_err(&pdev->dev, "no platform data\n");
+			goto err;
+		}
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		ret = -ENODEV;
+		dev_err(&pdev->dev, "invalid smi irq\n");
+		goto err;
+	}
+
+	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_ATOMIC);
+	if (!dev) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	smi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	dev->io_base = devm_ioremap_resource(&pdev->dev, smi_base);
+	if (IS_ERR(dev->io_base)) {
+		ret = PTR_ERR(dev->io_base);
+		goto err;
+	}
+
+	dev->pdev = pdev;
+	dev->clk_rate = pdata->clk_rate;
+
+	if (dev->clk_rate > SMI_MAX_CLOCK_FREQ)
+		dev->clk_rate = SMI_MAX_CLOCK_FREQ;
+
+	dev->num_flashes = pdata->num_flashes;
+
+	if (dev->num_flashes > MAX_NUM_FLASH_CHIP) {
+		dev_err(&pdev->dev, "exceeding max number of flashes\n");
+		dev->num_flashes = MAX_NUM_FLASH_CHIP;
+	}
+
+	dev->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(dev->clk)) {
+		ret = PTR_ERR(dev->clk);
+		goto err;
+	}
+
+	ret = clk_prepare_enable(dev->clk);
+	if (ret)
+		goto err;
+
+	ret = devm_request_irq(&pdev->dev, irq, spear_smi_int_handler, 0,
+			       pdev->name, dev);
+	if (ret) {
+		dev_err(&dev->pdev->dev, "SMI IRQ allocation failed\n");
+		goto err_irq;
+	}
+
+	mutex_init(&dev->lock);
+	init_waitqueue_head(&dev->cmd_complete);
+	spear_smi_hw_init(dev);
+	platform_set_drvdata(pdev, dev);
+
+	/* loop for each serial nor-flash which is connected to smi */
+	for (i = 0; i < dev->num_flashes; i++) {
+		ret = spear_smi_setup_banks(pdev, i, pdata->np[i]);
+		if (ret) {
+			dev_err(&dev->pdev->dev, "bank setup failed\n");
+			goto err_irq;
+		}
+	}
+
+	return 0;
+
+err_irq:
+	clk_disable_unprepare(dev->clk);
+err:
+	return ret;
+}
+
+/**
+ * spear_smi_remove - Exit routine
+ * @pdev: platform device structure
+ *
+ * free all allocations and delete the partitions.
+ */
+static int spear_smi_remove(struct platform_device *pdev)
+{
+	struct spear_smi *dev;
+	struct spear_snor_flash *flash;
+	int ret, i;
+
+	dev = platform_get_drvdata(pdev);
+	if (!dev) {
+		dev_err(&pdev->dev, "dev is null\n");
+		return -ENODEV;
+	}
+
+	/* clean up for all nor flash */
+	for (i = 0; i < dev->num_flashes; i++) {
+		flash = dev->flash[i];
+		if (!flash)
+			continue;
+
+		/* clean up mtd stuff */
+		ret = mtd_device_unregister(&flash->mtd);
+		if (ret)
+			dev_err(&pdev->dev, "error removing mtd\n");
+	}
+
+	clk_disable_unprepare(dev->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int spear_smi_suspend(struct device *dev)
+{
+	struct spear_smi *sdev = dev_get_drvdata(dev);
+
+	if (sdev && sdev->clk)
+		clk_disable_unprepare(sdev->clk);
+
+	return 0;
+}
+
+static int spear_smi_resume(struct device *dev)
+{
+	struct spear_smi *sdev = dev_get_drvdata(dev);
+	int ret = -EPERM;
+
+	if (sdev && sdev->clk)
+		ret = clk_prepare_enable(sdev->clk);
+
+	if (!ret)
+		spear_smi_hw_init(sdev);
+	return ret;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(spear_smi_pm_ops, spear_smi_suspend, spear_smi_resume);
+
+#ifdef CONFIG_OF
+static const struct of_device_id spear_smi_id_table[] = {
+	{ .compatible = "st,spear600-smi" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, spear_smi_id_table);
+#endif
+
+static struct platform_driver spear_smi_driver = {
+	.driver = {
+		.name = "smi",
+		.bus = &platform_bus_type,
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(spear_smi_id_table),
+		.pm = &spear_smi_pm_ops,
+	},
+	.probe = spear_smi_probe,
+	.remove = spear_smi_remove,
+};
+module_platform_driver(spear_smi_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ashish Priyadarshi, Shiraz Hashim <shiraz.linux.kernel@gmail.com>");
+MODULE_DESCRIPTION("MTD SMI driver for serial nor flash chips");
diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c
index ab5d8cd02a1..c63ecbcad0b 100644
--- a/drivers/mtd/devices/sst25l.c
+++ b/drivers/mtd/devices/sst25l.c
@@ -5,7 +5,7 @@
  *
  * Copyright © 2009 Bluewater Systems Ltd
  * Author: Andre Renaud <andre@bluewatersys.com>
- * Author: Ryan Mallon <ryan@bluewatersys.com>
+ * Author: Ryan Mallon
  *
  * Based on m25p80.c
  *
@@ -15,7 +15,6 @@
  *
  */
 
-#include <linux/init.h>
 #include <linux/module.h>
 #include <linux/device.h>
 #include <linux/mutex.h>
@@ -52,8 +51,6 @@ struct sst25l_flash {
 	struct spi_device	*spi;
 	struct mutex		lock;
 	struct mtd_info		mtd;
-
-	int 			partitioned;
 };
 
 struct flash_info {
@@ -66,7 +63,7 @@ struct flash_info {
 
 #define to_sst25l_flash(x) container_of(x, struct sst25l_flash, mtd)
 
-static struct flash_info __initdata sst25l_flash_info[] = {
+static struct flash_info sst25l_flash_info[] = {
 	{"sst25lf020a", 0xbf43, 256, 1024, 4096},
 	{"sst25lf040a",	0xbf44,	256, 2048, 4096},
 };
@@ -177,9 +174,6 @@ static int sst25l_erase(struct mtd_info *mtd, struct erase_info *instr)
 	int err;
 
 	/* Sanity checks */
-	if (instr->addr + instr->len > flash->mtd.size)
-		return -EINVAL;
-
 	if ((uint32_t)instr->len % mtd->erasesize)
 		return -EINVAL;
 
@@ -225,16 +219,6 @@ static int sst25l_read(struct mtd_info *mtd, loff_t from, size_t len,
 	unsigned char command[4];
 	int ret;
 
-	/* Sanity checking */
-	if (len == 0)
-		return 0;
-
-	if (from + len > flash->mtd.size)
-		return -EINVAL;
-
-	if (retlen)
-		*retlen = 0;
-
 	spi_message_init(&message);
 	memset(&transfer, 0, sizeof(transfer));
 
@@ -276,13 +260,6 @@ static int sst25l_write(struct mtd_info *mtd, loff_t to, size_t len,
 	int i, j, ret, bytes, copied = 0;
 	unsigned char command[5];
 
-	/* Sanity checks */
-	if (!len)
-		return 0;
-
-	if (to + len > flash->mtd.size)
-		return -EINVAL;
-
 	if ((uint32_t)to % mtd->writesize)
 		return -EINVAL;
 
@@ -335,7 +312,7 @@ out:
 	return ret;
 }
 
-static struct flash_info *__init sst25l_match_device(struct spi_device *spi)
+static struct flash_info *sst25l_match_device(struct spi_device *spi)
 {
 	struct flash_info *flash_info = NULL;
 	struct spi_message m;
@@ -375,26 +352,26 @@ static struct flash_info *__init sst25l_match_device(struct spi_device *spi)
 	return flash_info;
 }
 
-static int __init sst25l_probe(struct spi_device *spi)
+static int sst25l_probe(struct spi_device *spi)
 {
 	struct flash_info *flash_info;
 	struct sst25l_flash *flash;
 	struct flash_platform_data *data;
-	int ret, i;
+	int ret;
 
 	flash_info = sst25l_match_device(spi);
 	if (!flash_info)
 		return -ENODEV;
 
-	flash = kzalloc(sizeof(struct sst25l_flash), GFP_KERNEL);
+	flash = devm_kzalloc(&spi->dev, sizeof(*flash), GFP_KERNEL);
 	if (!flash)
 		return -ENOMEM;
 
 	flash->spi = spi;
 	mutex_init(&flash->lock);
-	dev_set_drvdata(&spi->dev, flash);
+	spi_set_drvdata(spi, flash);
 
-	data = spi->dev.platform_data;
+	data = dev_get_platdata(&spi->dev);
 	if (data && data->name)
 		flash->mtd.name = data->name;
 	else
@@ -404,109 +381,51 @@ static int __init sst25l_probe(struct spi_device *spi)
 	flash->mtd.flags	= MTD_CAP_NORFLASH;
 	flash->mtd.erasesize	= flash_info->erase_size;
 	flash->mtd.writesize	= flash_info->page_size;
+	flash->mtd.writebufsize	= flash_info->page_size;
 	flash->mtd.size		= flash_info->page_size * flash_info->nr_pages;
-	flash->mtd.erase	= sst25l_erase;
-	flash->mtd.read		= sst25l_read;
-	flash->mtd.write 	= sst25l_write;
+	flash->mtd._erase	= sst25l_erase;
+	flash->mtd._read		= sst25l_read;
+	flash->mtd._write 	= sst25l_write;
 
 	dev_info(&spi->dev, "%s (%lld KiB)\n", flash_info->name,
 		 (long long)flash->mtd.size >> 10);
 
-	DEBUG(MTD_DEBUG_LEVEL2,
-	      "mtd .name = %s, .size = 0x%llx (%lldMiB) "
+	pr_debug("mtd .name = %s, .size = 0x%llx (%lldMiB) "
 	      ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
 	      flash->mtd.name,
 	      (long long)flash->mtd.size, (long long)(flash->mtd.size >> 20),
 	      flash->mtd.erasesize, flash->mtd.erasesize / 1024,
 	      flash->mtd.numeraseregions);
 
-	if (mtd_has_partitions()) {
-		struct mtd_partition *parts = NULL;
-		int nr_parts = 0;
 
-		if (mtd_has_cmdlinepart()) {
-			static const char *part_probes[] =
-				{"cmdlinepart", NULL};
-
-			nr_parts = parse_mtd_partitions(&flash->mtd,
-							part_probes,
-							&parts, 0);
-		}
-
-		if (nr_parts <= 0 && data && data->parts) {
-			parts = data->parts;
-			nr_parts = data->nr_parts;
-		}
-
-		if (nr_parts > 0) {
-			for (i = 0; i < nr_parts; i++) {
-				DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = "
-				      "{.name = %s, .offset = 0x%llx, "
-				      ".size = 0x%llx (%lldKiB) }\n",
-				      i, parts[i].name,
-				      (long long)parts[i].offset,
-				      (long long)parts[i].size,
-				      (long long)(parts[i].size >> 10));
-			}
-
-			flash->partitioned = 1;
-			return add_mtd_partitions(&flash->mtd,
-						  parts, nr_parts);
-		}
-
-	} else if (data->nr_parts) {
-		dev_warn(&spi->dev, "ignoring %d default partitions on %s\n",
-			 data->nr_parts, data->name);
-	}
-
-	ret = add_mtd_device(&flash->mtd);
-	if (ret == 1) {
-		kfree(flash);
-		dev_set_drvdata(&spi->dev, NULL);
+	ret = mtd_device_parse_register(&flash->mtd, NULL, NULL,
+					data ? data->parts : NULL,
+					data ? data->nr_parts : 0);
+	if (ret)
 		return -ENODEV;
-	}
 
 	return 0;
 }
 
-static int __exit sst25l_remove(struct spi_device *spi)
+static int sst25l_remove(struct spi_device *spi)
 {
-	struct sst25l_flash *flash = dev_get_drvdata(&spi->dev);
-	int ret;
+	struct sst25l_flash *flash = spi_get_drvdata(spi);
 
-	if (mtd_has_partitions() && flash->partitioned)
-		ret = del_mtd_partitions(&flash->mtd);
-	else
-		ret = del_mtd_device(&flash->mtd);
-	if (ret == 0)
-		kfree(flash);
-	return ret;
+	return mtd_device_unregister(&flash->mtd);
 }
 
 static struct spi_driver sst25l_driver = {
 	.driver = {
 		.name	= "sst25l",
-		.bus	= &spi_bus_type,
 		.owner	= THIS_MODULE,
 	},
 	.probe		= sst25l_probe,
-	.remove		= __exit_p(sst25l_remove),
+	.remove		= sst25l_remove,
 };
 
-static int __init sst25l_init(void)
-{
-	return spi_register_driver(&sst25l_driver);
-}
-
-static void __exit sst25l_exit(void)
-{
-	spi_unregister_driver(&sst25l_driver);
-}
-
-module_init(sst25l_init);
-module_exit(sst25l_exit);
+module_spi_driver(sst25l_driver);
 
 MODULE_DESCRIPTION("MTD SPI driver for SST25L Flash chips");
 MODULE_AUTHOR("Andre Renaud <andre@bluewatersys.com>, "
-	      "Ryan Mallon <ryan@bluewatersys.com>");
+	      "Ryan Mallon");
 MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c
new file mode 100644
index 00000000000..d252514d3e9
--- /dev/null
+++ b/drivers/mtd/devices/st_spi_fsm.c
@@ -0,0 +1,2080 @@
+/*
+ * st_spi_fsm.c	- ST Fast Sequence Mode (FSM) Serial Flash Controller
+ *
+ * Author: Angus Clark <angus.clark@st.com>
+ *
+ * Copyright (C) 2010-2014 STMicroelectronics Limited
+ *
+ * JEDEC probe based on drivers/mtd/devices/m25p80.c
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/spi-nor.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/of.h>
+
+#include "serial_flash_cmds.h"
+
+/*
+ * FSM SPI Controller Registers
+ */
+#define SPI_CLOCKDIV			0x0010
+#define SPI_MODESELECT			0x0018
+#define SPI_CONFIGDATA			0x0020
+#define SPI_STA_MODE_CHANGE		0x0028
+#define SPI_FAST_SEQ_TRANSFER_SIZE	0x0100
+#define SPI_FAST_SEQ_ADD1		0x0104
+#define SPI_FAST_SEQ_ADD2		0x0108
+#define SPI_FAST_SEQ_ADD_CFG		0x010c
+#define SPI_FAST_SEQ_OPC1		0x0110
+#define SPI_FAST_SEQ_OPC2		0x0114
+#define SPI_FAST_SEQ_OPC3		0x0118
+#define SPI_FAST_SEQ_OPC4		0x011c
+#define SPI_FAST_SEQ_OPC5		0x0120
+#define SPI_MODE_BITS			0x0124
+#define SPI_DUMMY_BITS			0x0128
+#define SPI_FAST_SEQ_FLASH_STA_DATA	0x012c
+#define SPI_FAST_SEQ_1			0x0130
+#define SPI_FAST_SEQ_2			0x0134
+#define SPI_FAST_SEQ_3			0x0138
+#define SPI_FAST_SEQ_4			0x013c
+#define SPI_FAST_SEQ_CFG		0x0140
+#define SPI_FAST_SEQ_STA		0x0144
+#define SPI_QUAD_BOOT_SEQ_INIT_1	0x0148
+#define SPI_QUAD_BOOT_SEQ_INIT_2	0x014c
+#define SPI_QUAD_BOOT_READ_SEQ_1	0x0150
+#define SPI_QUAD_BOOT_READ_SEQ_2	0x0154
+#define SPI_PROGRAM_ERASE_TIME		0x0158
+#define SPI_MULT_PAGE_REPEAT_SEQ_1	0x015c
+#define SPI_MULT_PAGE_REPEAT_SEQ_2	0x0160
+#define SPI_STATUS_WR_TIME_REG		0x0164
+#define SPI_FAST_SEQ_DATA_REG		0x0300
+
+/*
+ * Register: SPI_MODESELECT
+ */
+#define SPI_MODESELECT_CONTIG		0x01
+#define SPI_MODESELECT_FASTREAD		0x02
+#define SPI_MODESELECT_DUALIO		0x04
+#define SPI_MODESELECT_FSM		0x08
+#define SPI_MODESELECT_QUADBOOT		0x10
+
+/*
+ * Register: SPI_CONFIGDATA
+ */
+#define SPI_CFG_DEVICE_ST		0x1
+#define SPI_CFG_DEVICE_ATMEL		0x4
+#define SPI_CFG_MIN_CS_HIGH(x)		(((x) & 0xfff) << 4)
+#define SPI_CFG_CS_SETUPHOLD(x)		(((x) & 0xff) << 16)
+#define SPI_CFG_DATA_HOLD(x)		(((x) & 0xff) << 24)
+
+#define SPI_CFG_DEFAULT_MIN_CS_HIGH    SPI_CFG_MIN_CS_HIGH(0x0AA)
+#define SPI_CFG_DEFAULT_CS_SETUPHOLD   SPI_CFG_CS_SETUPHOLD(0xA0)
+#define SPI_CFG_DEFAULT_DATA_HOLD      SPI_CFG_DATA_HOLD(0x00)
+
+/*
+ * Register: SPI_FAST_SEQ_TRANSFER_SIZE
+ */
+#define TRANSFER_SIZE(x)		((x) * 8)
+
+/*
+ * Register: SPI_FAST_SEQ_ADD_CFG
+ */
+#define ADR_CFG_CYCLES_ADD1(x)		((x) << 0)
+#define ADR_CFG_PADS_1_ADD1		(0x0 << 6)
+#define ADR_CFG_PADS_2_ADD1		(0x1 << 6)
+#define ADR_CFG_PADS_4_ADD1		(0x3 << 6)
+#define ADR_CFG_CSDEASSERT_ADD1		(1   << 8)
+#define ADR_CFG_CYCLES_ADD2(x)		((x) << (0+16))
+#define ADR_CFG_PADS_1_ADD2		(0x0 << (6+16))
+#define ADR_CFG_PADS_2_ADD2		(0x1 << (6+16))
+#define ADR_CFG_PADS_4_ADD2		(0x3 << (6+16))
+#define ADR_CFG_CSDEASSERT_ADD2		(1   << (8+16))
+
+/*
+ * Register: SPI_FAST_SEQ_n
+ */
+#define SEQ_OPC_OPCODE(x)		((x) << 0)
+#define SEQ_OPC_CYCLES(x)		((x) << 8)
+#define SEQ_OPC_PADS_1			(0x0 << 14)
+#define SEQ_OPC_PADS_2			(0x1 << 14)
+#define SEQ_OPC_PADS_4			(0x3 << 14)
+#define SEQ_OPC_CSDEASSERT		(1   << 16)
+
+/*
+ * Register: SPI_FAST_SEQ_CFG
+ */
+#define SEQ_CFG_STARTSEQ		(1 << 0)
+#define SEQ_CFG_SWRESET			(1 << 5)
+#define SEQ_CFG_CSDEASSERT		(1 << 6)
+#define SEQ_CFG_READNOTWRITE		(1 << 7)
+#define SEQ_CFG_ERASE			(1 << 8)
+#define SEQ_CFG_PADS_1			(0x0 << 16)
+#define SEQ_CFG_PADS_2			(0x1 << 16)
+#define SEQ_CFG_PADS_4			(0x3 << 16)
+
+/*
+ * Register: SPI_MODE_BITS
+ */
+#define MODE_DATA(x)			(x & 0xff)
+#define MODE_CYCLES(x)			((x & 0x3f) << 16)
+#define MODE_PADS_1			(0x0 << 22)
+#define MODE_PADS_2			(0x1 << 22)
+#define MODE_PADS_4			(0x3 << 22)
+#define DUMMY_CSDEASSERT		(1   << 24)
+
+/*
+ * Register: SPI_DUMMY_BITS
+ */
+#define DUMMY_CYCLES(x)			((x & 0x3f) << 16)
+#define DUMMY_PADS_1			(0x0 << 22)
+#define DUMMY_PADS_2			(0x1 << 22)
+#define DUMMY_PADS_4			(0x3 << 22)
+#define DUMMY_CSDEASSERT		(1   << 24)
+
+/*
+ * Register: SPI_FAST_SEQ_FLASH_STA_DATA
+ */
+#define STA_DATA_BYTE1(x)		((x & 0xff) << 0)
+#define STA_DATA_BYTE2(x)		((x & 0xff) << 8)
+#define STA_PADS_1			(0x0 << 16)
+#define STA_PADS_2			(0x1 << 16)
+#define STA_PADS_4			(0x3 << 16)
+#define STA_CSDEASSERT			(0x1 << 20)
+#define STA_RDNOTWR			(0x1 << 21)
+
+/*
+ * FSM SPI Instruction Opcodes
+ */
+#define STFSM_OPC_CMD			0x1
+#define STFSM_OPC_ADD			0x2
+#define STFSM_OPC_STA			0x3
+#define STFSM_OPC_MODE			0x4
+#define STFSM_OPC_DUMMY		0x5
+#define STFSM_OPC_DATA			0x6
+#define STFSM_OPC_WAIT			0x7
+#define STFSM_OPC_JUMP			0x8
+#define STFSM_OPC_GOTO			0x9
+#define STFSM_OPC_STOP			0xF
+
+/*
+ * FSM SPI Instructions (== opcode + operand).
+ */
+#define STFSM_INSTR(cmd, op)		((cmd) | ((op) << 4))
+
+#define STFSM_INST_CMD1			STFSM_INSTR(STFSM_OPC_CMD,	1)
+#define STFSM_INST_CMD2			STFSM_INSTR(STFSM_OPC_CMD,	2)
+#define STFSM_INST_CMD3			STFSM_INSTR(STFSM_OPC_CMD,	3)
+#define STFSM_INST_CMD4			STFSM_INSTR(STFSM_OPC_CMD,	4)
+#define STFSM_INST_CMD5			STFSM_INSTR(STFSM_OPC_CMD,	5)
+#define STFSM_INST_ADD1			STFSM_INSTR(STFSM_OPC_ADD,	1)
+#define STFSM_INST_ADD2			STFSM_INSTR(STFSM_OPC_ADD,	2)
+
+#define STFSM_INST_DATA_WRITE		STFSM_INSTR(STFSM_OPC_DATA,	1)
+#define STFSM_INST_DATA_READ		STFSM_INSTR(STFSM_OPC_DATA,	2)
+
+#define STFSM_INST_STA_RD1		STFSM_INSTR(STFSM_OPC_STA,	0x1)
+#define STFSM_INST_STA_WR1		STFSM_INSTR(STFSM_OPC_STA,	0x1)
+#define STFSM_INST_STA_RD2		STFSM_INSTR(STFSM_OPC_STA,	0x2)
+#define STFSM_INST_STA_WR1_2		STFSM_INSTR(STFSM_OPC_STA,	0x3)
+
+#define STFSM_INST_MODE			STFSM_INSTR(STFSM_OPC_MODE,	0)
+#define STFSM_INST_DUMMY		STFSM_INSTR(STFSM_OPC_DUMMY,	0)
+#define STFSM_INST_WAIT			STFSM_INSTR(STFSM_OPC_WAIT,	0)
+#define STFSM_INST_STOP			STFSM_INSTR(STFSM_OPC_STOP,	0)
+
+#define STFSM_DEFAULT_EMI_FREQ 100000000UL                        /* 100 MHz */
+#define STFSM_DEFAULT_WR_TIME  (STFSM_DEFAULT_EMI_FREQ * (15/1000)) /* 15ms */
+
+#define STFSM_FLASH_SAFE_FREQ  10000000UL                         /* 10 MHz */
+
+#define STFSM_MAX_WAIT_SEQ_MS  1000     /* FSM execution time */
+
+/* S25FLxxxS commands */
+#define S25FL_CMD_WRITE4_1_1_4 0x34
+#define S25FL_CMD_SE4          0xdc
+#define S25FL_CMD_CLSR         0x30
+#define S25FL_CMD_DYBWR                0xe1
+#define S25FL_CMD_DYBRD                0xe0
+#define S25FL_CMD_WRITE4       0x12    /* Note, opcode clashes with
+					* 'SPINOR_OP_WRITE_1_4_4'
+					* as found on N25Qxxx devices! */
+
+/* Status register */
+#define FLASH_STATUS_BUSY      0x01
+#define FLASH_STATUS_WEL       0x02
+#define FLASH_STATUS_BP0       0x04
+#define FLASH_STATUS_BP1       0x08
+#define FLASH_STATUS_BP2       0x10
+#define FLASH_STATUS_SRWP0     0x80
+#define FLASH_STATUS_TIMEOUT   0xff
+/* S25FL Error Flags */
+#define S25FL_STATUS_E_ERR     0x20
+#define S25FL_STATUS_P_ERR     0x40
+
+#define N25Q_CMD_WRVCR         0x81
+#define N25Q_CMD_RDVCR         0x85
+#define N25Q_CMD_RDVECR        0x65
+#define N25Q_CMD_RDNVCR        0xb5
+#define N25Q_CMD_WRNVCR        0xb1
+
+#define FLASH_PAGESIZE         256			/* In Bytes    */
+#define FLASH_PAGESIZE_32      (FLASH_PAGESIZE / 4)	/* In uint32_t */
+#define FLASH_MAX_BUSY_WAIT    (300 * HZ)	/* Maximum 'CHIPERASE' time */
+
+/*
+ * Flags to tweak operation of default read/write/erase routines
+ */
+#define CFG_READ_TOGGLE_32BIT_ADDR     0x00000001
+#define CFG_WRITE_TOGGLE_32BIT_ADDR    0x00000002
+#define CFG_ERASESEC_TOGGLE_32BIT_ADDR 0x00000008
+#define CFG_S25FL_CHECK_ERROR_FLAGS    0x00000010
+
+struct stfsm_seq {
+	uint32_t data_size;
+	uint32_t addr1;
+	uint32_t addr2;
+	uint32_t addr_cfg;
+	uint32_t seq_opc[5];
+	uint32_t mode;
+	uint32_t dummy;
+	uint32_t status;
+	uint8_t  seq[16];
+	uint32_t seq_cfg;
+} __packed __aligned(4);
+
+struct stfsm {
+	struct device		*dev;
+	void __iomem		*base;
+	struct resource		*region;
+	struct mtd_info		mtd;
+	struct mutex		lock;
+	struct flash_info       *info;
+
+	uint32_t                configuration;
+	uint32_t                fifo_dir_delay;
+	bool                    booted_from_spi;
+	bool                    reset_signal;
+	bool                    reset_por;
+
+	struct stfsm_seq stfsm_seq_read;
+	struct stfsm_seq stfsm_seq_write;
+	struct stfsm_seq stfsm_seq_en_32bit_addr;
+};
+
+/* Parameters to configure a READ or WRITE FSM sequence */
+struct seq_rw_config {
+	uint32_t        flags;          /* flags to support config */
+	uint8_t         cmd;            /* FLASH command */
+	int             write;          /* Write Sequence */
+	uint8_t         addr_pads;      /* No. of addr pads (MODE & DUMMY) */
+	uint8_t         data_pads;      /* No. of data pads */
+	uint8_t         mode_data;      /* MODE data */
+	uint8_t         mode_cycles;    /* No. of MODE cycles */
+	uint8_t         dummy_cycles;   /* No. of DUMMY cycles */
+};
+
+/* SPI Flash Device Table */
+struct flash_info {
+	char            *name;
+	/*
+	 * JEDEC id zero means "no ID" (most older chips); otherwise it has
+	 * a high byte of zero plus three data bytes: the manufacturer id,
+	 * then a two byte device id.
+	 */
+	u32             jedec_id;
+	u16             ext_id;
+	/*
+	 * The size listed here is what works with SPINOR_OP_SE, which isn't
+	 * necessarily called a "sector" by the vendor.
+	 */
+	unsigned        sector_size;
+	u16             n_sectors;
+	u32             flags;
+	/*
+	 * Note, where FAST_READ is supported, freq_max specifies the
+	 * FAST_READ frequency, not the READ frequency.
+	 */
+	u32             max_freq;
+	int             (*config)(struct stfsm *);
+};
+
+static int stfsm_n25q_config(struct stfsm *fsm);
+static int stfsm_mx25_config(struct stfsm *fsm);
+static int stfsm_s25fl_config(struct stfsm *fsm);
+static int stfsm_w25q_config(struct stfsm *fsm);
+
+static struct flash_info flash_types[] = {
+	/*
+	 * ST Microelectronics/Numonyx --
+	 * (newer production versions may have feature updates
+	 * (eg faster operating frequency)
+	 */
+#define M25P_FLAG (FLASH_FLAG_READ_WRITE | FLASH_FLAG_READ_FAST)
+	{ "m25p40",  0x202013, 0,  64 * 1024,   8, M25P_FLAG, 25, NULL },
+	{ "m25p80",  0x202014, 0,  64 * 1024,  16, M25P_FLAG, 25, NULL },
+	{ "m25p16",  0x202015, 0,  64 * 1024,  32, M25P_FLAG, 25, NULL },
+	{ "m25p32",  0x202016, 0,  64 * 1024,  64, M25P_FLAG, 50, NULL },
+	{ "m25p64",  0x202017, 0,  64 * 1024, 128, M25P_FLAG, 50, NULL },
+	{ "m25p128", 0x202018, 0, 256 * 1024,  64, M25P_FLAG, 50, NULL },
+
+#define M25PX_FLAG (FLASH_FLAG_READ_WRITE      |	\
+		    FLASH_FLAG_READ_FAST        |	\
+		    FLASH_FLAG_READ_1_1_2       |	\
+		    FLASH_FLAG_WRITE_1_1_2)
+	{ "m25px32", 0x207116, 0,  64 * 1024,  64, M25PX_FLAG, 75, NULL },
+	{ "m25px64", 0x207117, 0,  64 * 1024, 128, M25PX_FLAG, 75, NULL },
+
+	/* Macronix MX25xxx
+	 *     - Support for 'FLASH_FLAG_WRITE_1_4_4' is omitted for devices
+	 *       where operating frequency must be reduced.
+	 */
+#define MX25_FLAG (FLASH_FLAG_READ_WRITE       |	\
+		   FLASH_FLAG_READ_FAST         |	\
+		   FLASH_FLAG_READ_1_1_2        |	\
+		   FLASH_FLAG_READ_1_2_2        |	\
+		   FLASH_FLAG_READ_1_1_4        |	\
+		   FLASH_FLAG_SE_4K             |	\
+		   FLASH_FLAG_SE_32K)
+	{ "mx25l3255e",  0xc29e16, 0, 64 * 1024, 64,
+	  (MX25_FLAG | FLASH_FLAG_WRITE_1_4_4), 86,
+	  stfsm_mx25_config},
+	{ "mx25l25635e", 0xc22019, 0, 64*1024, 512,
+	  (MX25_FLAG | FLASH_FLAG_32BIT_ADDR | FLASH_FLAG_RESET), 70,
+	  stfsm_mx25_config },
+	{ "mx25l25655e", 0xc22619, 0, 64*1024, 512,
+	  (MX25_FLAG | FLASH_FLAG_32BIT_ADDR | FLASH_FLAG_RESET), 70,
+	  stfsm_mx25_config},
+
+#define N25Q_FLAG (FLASH_FLAG_READ_WRITE       |	\
+		   FLASH_FLAG_READ_FAST         |	\
+		   FLASH_FLAG_READ_1_1_2        |	\
+		   FLASH_FLAG_READ_1_2_2        |	\
+		   FLASH_FLAG_READ_1_1_4        |	\
+		   FLASH_FLAG_READ_1_4_4        |	\
+		   FLASH_FLAG_WRITE_1_1_2       |	\
+		   FLASH_FLAG_WRITE_1_2_2       |	\
+		   FLASH_FLAG_WRITE_1_1_4       |	\
+		   FLASH_FLAG_WRITE_1_4_4)
+	{ "n25q128", 0x20ba18, 0, 64 * 1024,  256, N25Q_FLAG, 108,
+	  stfsm_n25q_config },
+	{ "n25q256", 0x20ba19, 0, 64 * 1024,  512,
+	  N25Q_FLAG | FLASH_FLAG_32BIT_ADDR, 108, stfsm_n25q_config },
+
+	/*
+	 * Spansion S25FLxxxP
+	 *     - 256KiB and 64KiB sector variants (identified by ext. JEDEC)
+	 */
+#define S25FLXXXP_FLAG (FLASH_FLAG_READ_WRITE  |	\
+			FLASH_FLAG_READ_1_1_2   |	\
+			FLASH_FLAG_READ_1_2_2   |	\
+			FLASH_FLAG_READ_1_1_4   |	\
+			FLASH_FLAG_READ_1_4_4   |	\
+			FLASH_FLAG_WRITE_1_1_4  |	\
+			FLASH_FLAG_READ_FAST)
+	{ "s25fl032p",  0x010215, 0x4d00,  64 * 1024,  64, S25FLXXXP_FLAG, 80,
+	  stfsm_s25fl_config},
+	{ "s25fl129p0", 0x012018, 0x4d00, 256 * 1024,  64, S25FLXXXP_FLAG, 80,
+	  stfsm_s25fl_config },
+	{ "s25fl129p1", 0x012018, 0x4d01,  64 * 1024, 256, S25FLXXXP_FLAG, 80,
+	  stfsm_s25fl_config },
+
+	/*
+	 * Spansion S25FLxxxS
+	 *     - 256KiB and 64KiB sector variants (identified by ext. JEDEC)
+	 *     - RESET# signal supported by die but not bristled out on all
+	 *       package types.  The package type is a function of board design,
+	 *       so this information is captured in the board's flags.
+	 *     - Supports 'DYB' sector protection. Depending on variant, sectors
+	 *       may default to locked state on power-on.
+	 */
+#define S25FLXXXS_FLAG (S25FLXXXP_FLAG         |	\
+			FLASH_FLAG_RESET        |	\
+			FLASH_FLAG_DYB_LOCKING)
+	{ "s25fl128s0", 0x012018, 0x0300,  256 * 1024, 64, S25FLXXXS_FLAG, 80,
+	  stfsm_s25fl_config },
+	{ "s25fl128s1", 0x012018, 0x0301,  64 * 1024, 256, S25FLXXXS_FLAG, 80,
+	  stfsm_s25fl_config },
+	{ "s25fl256s0", 0x010219, 0x4d00, 256 * 1024, 128,
+	  S25FLXXXS_FLAG | FLASH_FLAG_32BIT_ADDR, 80, stfsm_s25fl_config },
+	{ "s25fl256s1", 0x010219, 0x4d01,  64 * 1024, 512,
+	  S25FLXXXS_FLAG | FLASH_FLAG_32BIT_ADDR, 80, stfsm_s25fl_config },
+
+	/* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
+#define W25X_FLAG (FLASH_FLAG_READ_WRITE       |	\
+		   FLASH_FLAG_READ_FAST         |	\
+		   FLASH_FLAG_READ_1_1_2        |	\
+		   FLASH_FLAG_WRITE_1_1_2)
+	{ "w25x40",  0xef3013, 0,  64 * 1024,   8, W25X_FLAG, 75, NULL },
+	{ "w25x80",  0xef3014, 0,  64 * 1024,  16, W25X_FLAG, 75, NULL },
+	{ "w25x16",  0xef3015, 0,  64 * 1024,  32, W25X_FLAG, 75, NULL },
+	{ "w25x32",  0xef3016, 0,  64 * 1024,  64, W25X_FLAG, 75, NULL },
+	{ "w25x64",  0xef3017, 0,  64 * 1024, 128, W25X_FLAG, 75, NULL },
+
+	/* Winbond -- w25q "blocks" are 64K, "sectors" are 4KiB */
+#define W25Q_FLAG (FLASH_FLAG_READ_WRITE       |	\
+		   FLASH_FLAG_READ_FAST         |	\
+		   FLASH_FLAG_READ_1_1_2        |	\
+		   FLASH_FLAG_READ_1_2_2        |	\
+		   FLASH_FLAG_READ_1_1_4        |	\
+		   FLASH_FLAG_READ_1_4_4        |	\
+		   FLASH_FLAG_WRITE_1_1_4)
+	{ "w25q80",  0xef4014, 0,  64 * 1024,  16, W25Q_FLAG, 80,
+	  stfsm_w25q_config },
+	{ "w25q16",  0xef4015, 0,  64 * 1024,  32, W25Q_FLAG, 80,
+	  stfsm_w25q_config },
+	{ "w25q32",  0xef4016, 0,  64 * 1024,  64, W25Q_FLAG, 80,
+	  stfsm_w25q_config },
+	{ "w25q64",  0xef4017, 0,  64 * 1024, 128, W25Q_FLAG, 80,
+	  stfsm_w25q_config },
+
+	/* Sentinel */
+	{ NULL, 0x000000, 0, 0, 0, 0, 0, NULL },
+};
+
+/*
+ * FSM message sequence configurations:
+ *
+ * All configs are presented in order of preference
+ */
+
+/* Default READ configurations, in order of preference */
+static struct seq_rw_config default_read_configs[] = {
+	{FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ_1_4_4,	0, 4, 4, 0x00, 2, 4},
+	{FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ_1_1_4,	0, 1, 4, 0x00, 4, 0},
+	{FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ_1_2_2,	0, 2, 2, 0x00, 4, 0},
+	{FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ_1_1_2,	0, 1, 2, 0x00, 0, 8},
+	{FLASH_FLAG_READ_FAST,	SPINOR_OP_READ_FAST,	0, 1, 1, 0x00, 0, 8},
+	{FLASH_FLAG_READ_WRITE, SPINOR_OP_READ,		0, 1, 1, 0x00, 0, 0},
+	{0x00,			0,			0, 0, 0, 0x00, 0, 0},
+};
+
+/* Default WRITE configurations */
+static struct seq_rw_config default_write_configs[] = {
+	{FLASH_FLAG_WRITE_1_4_4, SPINOR_OP_WRITE_1_4_4, 1, 4, 4, 0x00, 0, 0},
+	{FLASH_FLAG_WRITE_1_1_4, SPINOR_OP_WRITE_1_1_4, 1, 1, 4, 0x00, 0, 0},
+	{FLASH_FLAG_WRITE_1_2_2, SPINOR_OP_WRITE_1_2_2, 1, 2, 2, 0x00, 0, 0},
+	{FLASH_FLAG_WRITE_1_1_2, SPINOR_OP_WRITE_1_1_2, 1, 1, 2, 0x00, 0, 0},
+	{FLASH_FLAG_READ_WRITE,  SPINOR_OP_WRITE,       1, 1, 1, 0x00, 0, 0},
+	{0x00,			 0,			0, 0, 0, 0x00, 0, 0},
+};
+
+/*
+ * [N25Qxxx] Configuration
+ */
+#define N25Q_VCR_DUMMY_CYCLES(x)	(((x) & 0xf) << 4)
+#define N25Q_VCR_XIP_DISABLED		((uint8_t)0x1 << 3)
+#define N25Q_VCR_WRAP_CONT		0x3
+
+/* N25Q 3-byte Address READ configurations
+ *	- 'FAST' variants configured for 8 dummy cycles.
+ *
+ * Note, the number of dummy cycles used for 'FAST' READ operations is
+ * configurable and would normally be tuned according to the READ command and
+ * operating frequency.  However, this applies universally to all 'FAST' READ
+ * commands, including those used by the SPIBoot controller, and remains in
+ * force until the device is power-cycled.  Since the SPIBoot controller is
+ * hard-wired to use 8 dummy cycles, we must configure the device to also use 8
+ * cycles.
+ */
+static struct seq_rw_config n25q_read3_configs[] = {
+	{FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ_1_4_4,	0, 4, 4, 0x00, 0, 8},
+	{FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ_1_1_4,	0, 1, 4, 0x00, 0, 8},
+	{FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ_1_2_2,	0, 2, 2, 0x00, 0, 8},
+	{FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ_1_1_2,	0, 1, 2, 0x00, 0, 8},
+	{FLASH_FLAG_READ_FAST,	SPINOR_OP_READ_FAST,	0, 1, 1, 0x00, 0, 8},
+	{FLASH_FLAG_READ_WRITE, SPINOR_OP_READ,	        0, 1, 1, 0x00, 0, 0},
+	{0x00,			0,			0, 0, 0, 0x00, 0, 0},
+};
+
+/* N25Q 4-byte Address READ configurations
+ *	- use special 4-byte address READ commands (reduces overheads, and
+ *        reduces risk of hitting watchdog reset issues).
+ *	- 'FAST' variants configured for 8 dummy cycles (see note above.)
+ */
+static struct seq_rw_config n25q_read4_configs[] = {
+	{FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ4_1_4_4,	0, 4, 4, 0x00, 0, 8},
+	{FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ4_1_1_4,	0, 1, 4, 0x00, 0, 8},
+	{FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ4_1_2_2,	0, 2, 2, 0x00, 0, 8},
+	{FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ4_1_1_2,	0, 1, 2, 0x00, 0, 8},
+	{FLASH_FLAG_READ_FAST,	SPINOR_OP_READ4_FAST,	0, 1, 1, 0x00, 0, 8},
+	{FLASH_FLAG_READ_WRITE, SPINOR_OP_READ4,	0, 1, 1, 0x00, 0, 0},
+	{0x00,			0,			0, 0, 0, 0x00, 0, 0},
+};
+
+/*
+ * [MX25xxx] Configuration
+ */
+#define MX25_STATUS_QE			(0x1 << 6)
+
+static int stfsm_mx25_en_32bit_addr_seq(struct stfsm_seq *seq)
+{
+	seq->seq_opc[0] = (SEQ_OPC_PADS_1 |
+			   SEQ_OPC_CYCLES(8) |
+			   SEQ_OPC_OPCODE(SPINOR_OP_EN4B) |
+			   SEQ_OPC_CSDEASSERT);
+
+	seq->seq[0] = STFSM_INST_CMD1;
+	seq->seq[1] = STFSM_INST_WAIT;
+	seq->seq[2] = STFSM_INST_STOP;
+
+	seq->seq_cfg = (SEQ_CFG_PADS_1 |
+			SEQ_CFG_ERASE |
+			SEQ_CFG_READNOTWRITE |
+			SEQ_CFG_CSDEASSERT |
+			SEQ_CFG_STARTSEQ);
+
+	return 0;
+}
+
+/*
+ * [S25FLxxx] Configuration
+ */
+#define STFSM_S25FL_CONFIG_QE		(0x1 << 1)
+
+/*
+ * S25FLxxxS devices provide three ways of supporting 32-bit addressing: Bank
+ * Register, Extended Address Modes, and a 32-bit address command set.  The
+ * 32-bit address command set is used here, since it avoids any problems with
+ * entering a state that is incompatible with the SPIBoot Controller.
+ */
+static struct seq_rw_config stfsm_s25fl_read4_configs[] = {
+	{FLASH_FLAG_READ_1_4_4,  SPINOR_OP_READ4_1_4_4,  0, 4, 4, 0x00, 2, 4},
+	{FLASH_FLAG_READ_1_1_4,  SPINOR_OP_READ4_1_1_4,  0, 1, 4, 0x00, 0, 8},
+	{FLASH_FLAG_READ_1_2_2,  SPINOR_OP_READ4_1_2_2,  0, 2, 2, 0x00, 4, 0},
+	{FLASH_FLAG_READ_1_1_2,  SPINOR_OP_READ4_1_1_2,  0, 1, 2, 0x00, 0, 8},
+	{FLASH_FLAG_READ_FAST,   SPINOR_OP_READ4_FAST,   0, 1, 1, 0x00, 0, 8},
+	{FLASH_FLAG_READ_WRITE,  SPINOR_OP_READ4,        0, 1, 1, 0x00, 0, 0},
+	{0x00,                   0,                      0, 0, 0, 0x00, 0, 0},
+};
+
+static struct seq_rw_config stfsm_s25fl_write4_configs[] = {
+	{FLASH_FLAG_WRITE_1_1_4, S25FL_CMD_WRITE4_1_1_4, 1, 1, 4, 0x00, 0, 0},
+	{FLASH_FLAG_READ_WRITE,  S25FL_CMD_WRITE4,       1, 1, 1, 0x00, 0, 0},
+	{0x00,                   0,                      0, 0, 0, 0x00, 0, 0},
+};
+
+/*
+ * [W25Qxxx] Configuration
+ */
+#define W25Q_STATUS_QE			(0x1 << 1)
+
+static struct stfsm_seq stfsm_seq_read_jedec = {
+	.data_size = TRANSFER_SIZE(8),
+	.seq_opc[0] = (SEQ_OPC_PADS_1 |
+		       SEQ_OPC_CYCLES(8) |
+		       SEQ_OPC_OPCODE(SPINOR_OP_RDID)),
+	.seq = {
+		STFSM_INST_CMD1,
+		STFSM_INST_DATA_READ,
+		STFSM_INST_STOP,
+	},
+	.seq_cfg = (SEQ_CFG_PADS_1 |
+		    SEQ_CFG_READNOTWRITE |
+		    SEQ_CFG_CSDEASSERT |
+		    SEQ_CFG_STARTSEQ),
+};
+
+static struct stfsm_seq stfsm_seq_read_status_fifo = {
+	.data_size = TRANSFER_SIZE(4),
+	.seq_opc[0] = (SEQ_OPC_PADS_1 |
+		       SEQ_OPC_CYCLES(8) |
+		       SEQ_OPC_OPCODE(SPINOR_OP_RDSR)),
+	.seq = {
+		STFSM_INST_CMD1,
+		STFSM_INST_DATA_READ,
+		STFSM_INST_STOP,
+	},
+	.seq_cfg = (SEQ_CFG_PADS_1 |
+		    SEQ_CFG_READNOTWRITE |
+		    SEQ_CFG_CSDEASSERT |
+		    SEQ_CFG_STARTSEQ),
+};
+
+static struct stfsm_seq stfsm_seq_erase_sector = {
+	/* 'addr_cfg' configured during initialisation */
+	.seq_opc = {
+		(SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+		 SEQ_OPC_OPCODE(SPINOR_OP_WREN) | SEQ_OPC_CSDEASSERT),
+
+		(SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+		 SEQ_OPC_OPCODE(SPINOR_OP_SE)),
+	},
+	.seq = {
+		STFSM_INST_CMD1,
+		STFSM_INST_CMD2,
+		STFSM_INST_ADD1,
+		STFSM_INST_ADD2,
+		STFSM_INST_STOP,
+	},
+	.seq_cfg = (SEQ_CFG_PADS_1 |
+		    SEQ_CFG_READNOTWRITE |
+		    SEQ_CFG_CSDEASSERT |
+		    SEQ_CFG_STARTSEQ),
+};
+
+static struct stfsm_seq stfsm_seq_erase_chip = {
+	.seq_opc = {
+		(SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+		 SEQ_OPC_OPCODE(SPINOR_OP_WREN) | SEQ_OPC_CSDEASSERT),
+
+		(SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+		 SEQ_OPC_OPCODE(SPINOR_OP_CHIP_ERASE) | SEQ_OPC_CSDEASSERT),
+	},
+	.seq = {
+		STFSM_INST_CMD1,
+		STFSM_INST_CMD2,
+		STFSM_INST_WAIT,
+		STFSM_INST_STOP,
+	},
+	.seq_cfg = (SEQ_CFG_PADS_1 |
+		    SEQ_CFG_ERASE |
+		    SEQ_CFG_READNOTWRITE |
+		    SEQ_CFG_CSDEASSERT |
+		    SEQ_CFG_STARTSEQ),
+};
+
+static struct stfsm_seq stfsm_seq_write_status = {
+	.seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+		       SEQ_OPC_OPCODE(SPINOR_OP_WREN) | SEQ_OPC_CSDEASSERT),
+	.seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+		       SEQ_OPC_OPCODE(SPINOR_OP_WRSR)),
+	.seq = {
+		STFSM_INST_CMD1,
+		STFSM_INST_CMD2,
+		STFSM_INST_STA_WR1,
+		STFSM_INST_STOP,
+	},
+	.seq_cfg = (SEQ_CFG_PADS_1 |
+		    SEQ_CFG_READNOTWRITE |
+		    SEQ_CFG_CSDEASSERT |
+		    SEQ_CFG_STARTSEQ),
+};
+
+static int stfsm_n25q_en_32bit_addr_seq(struct stfsm_seq *seq)
+{
+	seq->seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+			   SEQ_OPC_OPCODE(SPINOR_OP_EN4B));
+	seq->seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+			   SEQ_OPC_OPCODE(SPINOR_OP_WREN) |
+			   SEQ_OPC_CSDEASSERT);
+
+	seq->seq[0] = STFSM_INST_CMD2;
+	seq->seq[1] = STFSM_INST_CMD1;
+	seq->seq[2] = STFSM_INST_WAIT;
+	seq->seq[3] = STFSM_INST_STOP;
+
+	seq->seq_cfg = (SEQ_CFG_PADS_1 |
+			SEQ_CFG_ERASE |
+			SEQ_CFG_READNOTWRITE |
+			SEQ_CFG_CSDEASSERT |
+			SEQ_CFG_STARTSEQ);
+
+	return 0;
+}
+
+static inline int stfsm_is_idle(struct stfsm *fsm)
+{
+	return readl(fsm->base + SPI_FAST_SEQ_STA) & 0x10;
+}
+
+static inline uint32_t stfsm_fifo_available(struct stfsm *fsm)
+{
+	return (readl(fsm->base + SPI_FAST_SEQ_STA) >> 5) & 0x7f;
+}
+
+static void stfsm_clear_fifo(struct stfsm *fsm)
+{
+	uint32_t avail;
+
+	for (;;) {
+		avail = stfsm_fifo_available(fsm);
+		if (!avail)
+			break;
+
+		while (avail) {
+			readl(fsm->base + SPI_FAST_SEQ_DATA_REG);
+			avail--;
+		}
+	}
+}
+
+static inline void stfsm_load_seq(struct stfsm *fsm,
+				  const struct stfsm_seq *seq)
+{
+	void __iomem *dst = fsm->base + SPI_FAST_SEQ_TRANSFER_SIZE;
+	const uint32_t *src = (const uint32_t *)seq;
+	int words = sizeof(*seq) / sizeof(*src);
+
+	BUG_ON(!stfsm_is_idle(fsm));
+
+	while (words--) {
+		writel(*src, dst);
+		src++;
+		dst += 4;
+	}
+}
+
+static void stfsm_wait_seq(struct stfsm *fsm)
+{
+	unsigned long deadline;
+	int timeout = 0;
+
+	deadline = jiffies + msecs_to_jiffies(STFSM_MAX_WAIT_SEQ_MS);
+
+	while (!timeout) {
+		if (time_after_eq(jiffies, deadline))
+			timeout = 1;
+
+		if (stfsm_is_idle(fsm))
+			return;
+
+		cond_resched();
+	}
+
+	dev_err(fsm->dev, "timeout on sequence completion\n");
+}
+
+static void stfsm_read_fifo(struct stfsm *fsm, uint32_t *buf, uint32_t size)
+{
+	uint32_t remaining = size >> 2;
+	uint32_t avail;
+	uint32_t words;
+
+	dev_dbg(fsm->dev, "Reading %d bytes from FIFO\n", size);
+
+	BUG_ON((((uintptr_t)buf) & 0x3) || (size & 0x3));
+
+	while (remaining) {
+		for (;;) {
+			avail = stfsm_fifo_available(fsm);
+			if (avail)
+				break;
+			udelay(1);
+		}
+		words = min(avail, remaining);
+		remaining -= words;
+
+		readsl(fsm->base + SPI_FAST_SEQ_DATA_REG, buf, words);
+		buf += words;
+	}
+}
+
+static int stfsm_write_fifo(struct stfsm *fsm, const uint32_t *buf,
+			    uint32_t size)
+{
+	uint32_t words = size >> 2;
+
+	dev_dbg(fsm->dev, "writing %d bytes to FIFO\n", size);
+
+	BUG_ON((((uintptr_t)buf) & 0x3) || (size & 0x3));
+
+	writesl(fsm->base + SPI_FAST_SEQ_DATA_REG, buf, words);
+
+	return size;
+}
+
+static int stfsm_enter_32bit_addr(struct stfsm *fsm, int enter)
+{
+	struct stfsm_seq *seq = &fsm->stfsm_seq_en_32bit_addr;
+	uint32_t cmd = enter ? SPINOR_OP_EN4B : SPINOR_OP_EX4B;
+
+	seq->seq_opc[0] = (SEQ_OPC_PADS_1 |
+			   SEQ_OPC_CYCLES(8) |
+			   SEQ_OPC_OPCODE(cmd) |
+			   SEQ_OPC_CSDEASSERT);
+
+	stfsm_load_seq(fsm, seq);
+
+	stfsm_wait_seq(fsm);
+
+	return 0;
+}
+
+static uint8_t stfsm_wait_busy(struct stfsm *fsm)
+{
+	struct stfsm_seq *seq = &stfsm_seq_read_status_fifo;
+	unsigned long deadline;
+	uint32_t status;
+	int timeout = 0;
+
+	/* Use RDRS1 */
+	seq->seq_opc[0] = (SEQ_OPC_PADS_1 |
+			   SEQ_OPC_CYCLES(8) |
+			   SEQ_OPC_OPCODE(SPINOR_OP_RDSR));
+
+	/* Load read_status sequence */
+	stfsm_load_seq(fsm, seq);
+
+	/*
+	 * Repeat until busy bit is deasserted, or timeout, or error (S25FLxxxS)
+	 */
+	deadline = jiffies + FLASH_MAX_BUSY_WAIT;
+	while (!timeout) {
+		if (time_after_eq(jiffies, deadline))
+			timeout = 1;
+
+		stfsm_wait_seq(fsm);
+
+		stfsm_read_fifo(fsm, &status, 4);
+
+		if ((status & FLASH_STATUS_BUSY) == 0)
+			return 0;
+
+		if ((fsm->configuration & CFG_S25FL_CHECK_ERROR_FLAGS) &&
+		    ((status & S25FL_STATUS_P_ERR) ||
+		     (status & S25FL_STATUS_E_ERR)))
+			return (uint8_t)(status & 0xff);
+
+		if (!timeout)
+			/* Restart */
+			writel(seq->seq_cfg, fsm->base + SPI_FAST_SEQ_CFG);
+
+		cond_resched();
+	}
+
+	dev_err(fsm->dev, "timeout on wait_busy\n");
+
+	return FLASH_STATUS_TIMEOUT;
+}
+
+static int stfsm_read_status(struct stfsm *fsm, uint8_t cmd,
+			     uint8_t *data, int bytes)
+{
+	struct stfsm_seq *seq = &stfsm_seq_read_status_fifo;
+	uint32_t tmp;
+	uint8_t *t = (uint8_t *)&tmp;
+	int i;
+
+	dev_dbg(fsm->dev, "read 'status' register [0x%02x], %d byte(s)\n",
+		cmd, bytes);
+
+	BUG_ON(bytes != 1 && bytes != 2);
+
+	seq->seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+			   SEQ_OPC_OPCODE(cmd)),
+
+	stfsm_load_seq(fsm, seq);
+
+	stfsm_read_fifo(fsm, &tmp, 4);
+
+	for (i = 0; i < bytes; i++)
+		data[i] = t[i];
+
+	stfsm_wait_seq(fsm);
+
+	return 0;
+}
+
+static int stfsm_write_status(struct stfsm *fsm, uint8_t cmd,
+			    uint16_t data, int bytes, int wait_busy)
+{
+	struct stfsm_seq *seq = &stfsm_seq_write_status;
+
+	dev_dbg(fsm->dev,
+		"write 'status' register [0x%02x], %d byte(s), 0x%04x\n"
+		" %s wait-busy\n", cmd, bytes, data, wait_busy ? "with" : "no");
+
+	BUG_ON(bytes != 1 && bytes != 2);
+
+	seq->seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+			   SEQ_OPC_OPCODE(cmd));
+
+	seq->status = (uint32_t)data | STA_PADS_1 | STA_CSDEASSERT;
+	seq->seq[2] = (bytes == 1) ? STFSM_INST_STA_WR1 : STFSM_INST_STA_WR1_2;
+
+	stfsm_load_seq(fsm, seq);
+
+	stfsm_wait_seq(fsm);
+
+	if (wait_busy)
+		stfsm_wait_busy(fsm);
+
+	return 0;
+}
+
+/*
+ * SoC reset on 'boot-from-spi' systems
+ *
+ * Certain modes of operation cause the Flash device to enter a particular state
+ * for a period of time (e.g. 'Erase Sector', 'Quad Enable', and 'Enter 32-bit
+ * Addr' commands).  On boot-from-spi systems, it is important to consider what
+ * happens if a warm reset occurs during this period.  The SPIBoot controller
+ * assumes that Flash device is in its default reset state, 24-bit address mode,
+ * and ready to accept commands.  This can be achieved using some form of
+ * on-board logic/controller to force a device POR in response to a SoC-level
+ * reset or by making use of the device reset signal if available (limited
+ * number of devices only).
+ *
+ * Failure to take such precautions can cause problems following a warm reset.
+ * For some operations (e.g. ERASE), there is little that can be done.  For
+ * other modes of operation (e.g. 32-bit addressing), options are often
+ * available that can help minimise the window in which a reset could cause a
+ * problem.
+ *
+ */
+static bool stfsm_can_handle_soc_reset(struct stfsm *fsm)
+{
+	/* Reset signal is available on the board and supported by the device */
+	if (fsm->reset_signal && fsm->info->flags & FLASH_FLAG_RESET)
+		return true;
+
+	/* Board-level logic forces a power-on-reset */
+	if (fsm->reset_por)
+		return true;
+
+	/* Reset is not properly handled and may result in failure to reboot */
+	return false;
+}
+
+/* Configure 'addr_cfg' according to addressing mode */
+static void stfsm_prepare_erasesec_seq(struct stfsm *fsm,
+				       struct stfsm_seq *seq)
+{
+	int addr1_cycles = fsm->info->flags & FLASH_FLAG_32BIT_ADDR ? 16 : 8;
+
+	seq->addr_cfg = (ADR_CFG_CYCLES_ADD1(addr1_cycles) |
+			 ADR_CFG_PADS_1_ADD1 |
+			 ADR_CFG_CYCLES_ADD2(16) |
+			 ADR_CFG_PADS_1_ADD2 |
+			 ADR_CFG_CSDEASSERT_ADD2);
+}
+
+/* Search for preferred configuration based on available flags */
+static struct seq_rw_config *
+stfsm_search_seq_rw_configs(struct stfsm *fsm,
+			    struct seq_rw_config cfgs[])
+{
+	struct seq_rw_config *config;
+	int flags = fsm->info->flags;
+
+	for (config = cfgs; config->cmd != 0; config++)
+		if ((config->flags & flags) == config->flags)
+			return config;
+
+	return NULL;
+}
+
+/* Prepare a READ/WRITE sequence according to configuration parameters */
+static void stfsm_prepare_rw_seq(struct stfsm *fsm,
+				 struct stfsm_seq *seq,
+				 struct seq_rw_config *cfg)
+{
+	int addr1_cycles, addr2_cycles;
+	int i = 0;
+
+	memset(seq, 0, sizeof(*seq));
+
+	/* Add READ/WRITE OPC  */
+	seq->seq_opc[i++] = (SEQ_OPC_PADS_1 |
+			     SEQ_OPC_CYCLES(8) |
+			     SEQ_OPC_OPCODE(cfg->cmd));
+
+	/* Add WREN OPC for a WRITE sequence */
+	if (cfg->write)
+		seq->seq_opc[i++] = (SEQ_OPC_PADS_1 |
+				     SEQ_OPC_CYCLES(8) |
+				     SEQ_OPC_OPCODE(SPINOR_OP_WREN) |
+				     SEQ_OPC_CSDEASSERT);
+
+	/* Address configuration (24 or 32-bit addresses) */
+	addr1_cycles  = (fsm->info->flags & FLASH_FLAG_32BIT_ADDR) ? 16 : 8;
+	addr1_cycles /= cfg->addr_pads;
+	addr2_cycles  = 16 / cfg->addr_pads;
+	seq->addr_cfg = ((addr1_cycles & 0x3f) << 0 |	/* ADD1 cycles */
+			 (cfg->addr_pads - 1) << 6 |	/* ADD1 pads */
+			 (addr2_cycles & 0x3f) << 16 |	/* ADD2 cycles */
+			 ((cfg->addr_pads - 1) << 22));	/* ADD2 pads */
+
+	/* Data/Sequence configuration */
+	seq->seq_cfg = ((cfg->data_pads - 1) << 16 |
+			SEQ_CFG_STARTSEQ |
+			SEQ_CFG_CSDEASSERT);
+	if (!cfg->write)
+		seq->seq_cfg |= SEQ_CFG_READNOTWRITE;
+
+	/* Mode configuration (no. of pads taken from addr cfg) */
+	seq->mode = ((cfg->mode_data & 0xff) << 0 |	/* data */
+		     (cfg->mode_cycles & 0x3f) << 16 |	/* cycles */
+		     (cfg->addr_pads - 1) << 22);	/* pads */
+
+	/* Dummy configuration (no. of pads taken from addr cfg) */
+	seq->dummy = ((cfg->dummy_cycles & 0x3f) << 16 |	/* cycles */
+		      (cfg->addr_pads - 1) << 22);		/* pads */
+
+
+	/* Instruction sequence */
+	i = 0;
+	if (cfg->write)
+		seq->seq[i++] = STFSM_INST_CMD2;
+
+	seq->seq[i++] = STFSM_INST_CMD1;
+
+	seq->seq[i++] = STFSM_INST_ADD1;
+	seq->seq[i++] = STFSM_INST_ADD2;
+
+	if (cfg->mode_cycles)
+		seq->seq[i++] = STFSM_INST_MODE;
+
+	if (cfg->dummy_cycles)
+		seq->seq[i++] = STFSM_INST_DUMMY;
+
+	seq->seq[i++] =
+		cfg->write ? STFSM_INST_DATA_WRITE : STFSM_INST_DATA_READ;
+	seq->seq[i++] = STFSM_INST_STOP;
+}
+
+static int stfsm_search_prepare_rw_seq(struct stfsm *fsm,
+				       struct stfsm_seq *seq,
+				       struct seq_rw_config *cfgs)
+{
+	struct seq_rw_config *config;
+
+	config = stfsm_search_seq_rw_configs(fsm, cfgs);
+	if (!config) {
+		dev_err(fsm->dev, "failed to find suitable config\n");
+		return -EINVAL;
+	}
+
+	stfsm_prepare_rw_seq(fsm, seq, config);
+
+	return 0;
+}
+
+/* Prepare a READ/WRITE/ERASE 'default' sequences */
+static int stfsm_prepare_rwe_seqs_default(struct stfsm *fsm)
+{
+	uint32_t flags = fsm->info->flags;
+	int ret;
+
+	/* Configure 'READ' sequence */
+	ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_read,
+					  default_read_configs);
+	if (ret) {
+		dev_err(fsm->dev,
+			"failed to prep READ sequence with flags [0x%08x]\n",
+			flags);
+		return ret;
+	}
+
+	/* Configure 'WRITE' sequence */
+	ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_write,
+					  default_write_configs);
+	if (ret) {
+		dev_err(fsm->dev,
+			"failed to prep WRITE sequence with flags [0x%08x]\n",
+			flags);
+		return ret;
+	}
+
+	/* Configure 'ERASE_SECTOR' sequence */
+	stfsm_prepare_erasesec_seq(fsm, &stfsm_seq_erase_sector);
+
+	return 0;
+}
+
+static int stfsm_mx25_config(struct stfsm *fsm)
+{
+	uint32_t flags = fsm->info->flags;
+	uint32_t data_pads;
+	uint8_t sta;
+	int ret;
+	bool soc_reset;
+
+	/*
+	 * Use default READ/WRITE sequences
+	 */
+	ret = stfsm_prepare_rwe_seqs_default(fsm);
+	if (ret)
+		return ret;
+
+	/*
+	 * Configure 32-bit Address Support
+	 */
+	if (flags & FLASH_FLAG_32BIT_ADDR) {
+		/* Configure 'enter_32bitaddr' FSM sequence */
+		stfsm_mx25_en_32bit_addr_seq(&fsm->stfsm_seq_en_32bit_addr);
+
+		soc_reset = stfsm_can_handle_soc_reset(fsm);
+		if (soc_reset || !fsm->booted_from_spi)
+			/* If we can handle SoC resets, we enable 32-bit address
+			 * mode pervasively */
+			stfsm_enter_32bit_addr(fsm, 1);
+
+		else
+			/* Else, enable/disable 32-bit addressing before/after
+			 * each operation */
+			fsm->configuration = (CFG_READ_TOGGLE_32BIT_ADDR |
+					      CFG_WRITE_TOGGLE_32BIT_ADDR |
+					      CFG_ERASESEC_TOGGLE_32BIT_ADDR);
+	}
+
+	/* Check status of 'QE' bit, update if required. */
+	stfsm_read_status(fsm, SPINOR_OP_RDSR, &sta, 1);
+	data_pads = ((fsm->stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1;
+	if (data_pads == 4) {
+		if (!(sta & MX25_STATUS_QE)) {
+			/* Set 'QE' */
+			sta |= MX25_STATUS_QE;
+
+			stfsm_write_status(fsm, SPINOR_OP_WRSR, sta, 1, 1);
+		}
+	} else {
+		if (sta & MX25_STATUS_QE) {
+			/* Clear 'QE' */
+			sta &= ~MX25_STATUS_QE;
+
+			stfsm_write_status(fsm, SPINOR_OP_WRSR, sta, 1, 1);
+		}
+	}
+
+	return 0;
+}
+
+static int stfsm_n25q_config(struct stfsm *fsm)
+{
+	uint32_t flags = fsm->info->flags;
+	uint8_t vcr;
+	int ret = 0;
+	bool soc_reset;
+
+	/* Configure 'READ' sequence */
+	if (flags & FLASH_FLAG_32BIT_ADDR)
+		ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_read,
+						  n25q_read4_configs);
+	else
+		ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_read,
+						  n25q_read3_configs);
+	if (ret) {
+		dev_err(fsm->dev,
+			"failed to prepare READ sequence with flags [0x%08x]\n",
+			flags);
+		return ret;
+	}
+
+	/* Configure 'WRITE' sequence (default configs) */
+	ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_write,
+					  default_write_configs);
+	if (ret) {
+		dev_err(fsm->dev,
+			"preparing WRITE sequence using flags [0x%08x] failed\n",
+			flags);
+		return ret;
+	}
+
+	/* * Configure 'ERASE_SECTOR' sequence */
+	stfsm_prepare_erasesec_seq(fsm, &stfsm_seq_erase_sector);
+
+	/* Configure 32-bit address support */
+	if (flags & FLASH_FLAG_32BIT_ADDR) {
+		stfsm_n25q_en_32bit_addr_seq(&fsm->stfsm_seq_en_32bit_addr);
+
+		soc_reset = stfsm_can_handle_soc_reset(fsm);
+		if (soc_reset || !fsm->booted_from_spi) {
+			/*
+			 * If we can handle SoC resets, we enable 32-bit
+			 * address mode pervasively
+			 */
+			stfsm_enter_32bit_addr(fsm, 1);
+		} else {
+			/*
+			 * If not, enable/disable for WRITE and ERASE
+			 * operations (READ uses special commands)
+			 */
+			fsm->configuration = (CFG_WRITE_TOGGLE_32BIT_ADDR |
+					      CFG_ERASESEC_TOGGLE_32BIT_ADDR);
+		}
+	}
+
+	/*
+	 * Configure device to use 8 dummy cycles
+	 */
+	vcr = (N25Q_VCR_DUMMY_CYCLES(8) | N25Q_VCR_XIP_DISABLED |
+	       N25Q_VCR_WRAP_CONT);
+	stfsm_write_status(fsm, N25Q_CMD_WRVCR, vcr, 1, 0);
+
+	return 0;
+}
+
+static void stfsm_s25fl_prepare_erasesec_seq_32(struct stfsm_seq *seq)
+{
+	seq->seq_opc[1] = (SEQ_OPC_PADS_1 |
+			   SEQ_OPC_CYCLES(8) |
+			   SEQ_OPC_OPCODE(S25FL_CMD_SE4));
+
+	seq->addr_cfg = (ADR_CFG_CYCLES_ADD1(16) |
+			 ADR_CFG_PADS_1_ADD1 |
+			 ADR_CFG_CYCLES_ADD2(16) |
+			 ADR_CFG_PADS_1_ADD2 |
+			 ADR_CFG_CSDEASSERT_ADD2);
+}
+
+static void stfsm_s25fl_read_dyb(struct stfsm *fsm, uint32_t offs, uint8_t *dby)
+{
+	uint32_t tmp;
+	struct stfsm_seq seq = {
+		.data_size = TRANSFER_SIZE(4),
+		.seq_opc[0] = (SEQ_OPC_PADS_1 |
+			       SEQ_OPC_CYCLES(8) |
+			       SEQ_OPC_OPCODE(S25FL_CMD_DYBRD)),
+		.addr_cfg = (ADR_CFG_CYCLES_ADD1(16) |
+			     ADR_CFG_PADS_1_ADD1 |
+			     ADR_CFG_CYCLES_ADD2(16) |
+			     ADR_CFG_PADS_1_ADD2),
+		.addr1 = (offs >> 16) & 0xffff,
+		.addr2 = offs & 0xffff,
+		.seq = {
+			STFSM_INST_CMD1,
+			STFSM_INST_ADD1,
+			STFSM_INST_ADD2,
+			STFSM_INST_DATA_READ,
+			STFSM_INST_STOP,
+		},
+		.seq_cfg = (SEQ_CFG_PADS_1 |
+			    SEQ_CFG_READNOTWRITE |
+			    SEQ_CFG_CSDEASSERT |
+			    SEQ_CFG_STARTSEQ),
+	};
+
+	stfsm_load_seq(fsm, &seq);
+
+	stfsm_read_fifo(fsm, &tmp, 4);
+
+	*dby = (uint8_t)(tmp >> 24);
+
+	stfsm_wait_seq(fsm);
+}
+
+static void stfsm_s25fl_write_dyb(struct stfsm *fsm, uint32_t offs, uint8_t dby)
+{
+	struct stfsm_seq seq = {
+		.seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+			       SEQ_OPC_OPCODE(SPINOR_OP_WREN) |
+			       SEQ_OPC_CSDEASSERT),
+		.seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+			       SEQ_OPC_OPCODE(S25FL_CMD_DYBWR)),
+		.addr_cfg = (ADR_CFG_CYCLES_ADD1(16) |
+			     ADR_CFG_PADS_1_ADD1 |
+			     ADR_CFG_CYCLES_ADD2(16) |
+			     ADR_CFG_PADS_1_ADD2),
+		.status = (uint32_t)dby | STA_PADS_1 | STA_CSDEASSERT,
+		.addr1 = (offs >> 16) & 0xffff,
+		.addr2 = offs & 0xffff,
+		.seq = {
+			STFSM_INST_CMD1,
+			STFSM_INST_CMD2,
+			STFSM_INST_ADD1,
+			STFSM_INST_ADD2,
+			STFSM_INST_STA_WR1,
+			STFSM_INST_STOP,
+		},
+		.seq_cfg = (SEQ_CFG_PADS_1 |
+			    SEQ_CFG_READNOTWRITE |
+			    SEQ_CFG_CSDEASSERT |
+			    SEQ_CFG_STARTSEQ),
+	};
+
+	stfsm_load_seq(fsm, &seq);
+	stfsm_wait_seq(fsm);
+
+	stfsm_wait_busy(fsm);
+}
+
+static int stfsm_s25fl_clear_status_reg(struct stfsm *fsm)
+{
+	struct stfsm_seq seq = {
+		.seq_opc[0] = (SEQ_OPC_PADS_1 |
+			       SEQ_OPC_CYCLES(8) |
+			       SEQ_OPC_OPCODE(S25FL_CMD_CLSR) |
+			       SEQ_OPC_CSDEASSERT),
+		.seq_opc[1] = (SEQ_OPC_PADS_1 |
+			       SEQ_OPC_CYCLES(8) |
+			       SEQ_OPC_OPCODE(SPINOR_OP_WRDI) |
+			       SEQ_OPC_CSDEASSERT),
+		.seq = {
+			STFSM_INST_CMD1,
+			STFSM_INST_CMD2,
+			STFSM_INST_WAIT,
+			STFSM_INST_STOP,
+		},
+		.seq_cfg = (SEQ_CFG_PADS_1 |
+			    SEQ_CFG_ERASE |
+			    SEQ_CFG_READNOTWRITE |
+			    SEQ_CFG_CSDEASSERT |
+			    SEQ_CFG_STARTSEQ),
+	};
+
+	stfsm_load_seq(fsm, &seq);
+
+	stfsm_wait_seq(fsm);
+
+	return 0;
+}
+
+static int stfsm_s25fl_config(struct stfsm *fsm)
+{
+	struct flash_info *info = fsm->info;
+	uint32_t flags = info->flags;
+	uint32_t data_pads;
+	uint32_t offs;
+	uint16_t sta_wr;
+	uint8_t sr1, cr1, dyb;
+	int update_sr = 0;
+	int ret;
+
+	if (flags & FLASH_FLAG_32BIT_ADDR) {
+		/*
+		 * Prepare Read/Write/Erase sequences according to S25FLxxx
+		 * 32-bit address command set
+		 */
+		ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_read,
+						  stfsm_s25fl_read4_configs);
+		if (ret)
+			return ret;
+
+		ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_write,
+						  stfsm_s25fl_write4_configs);
+		if (ret)
+			return ret;
+
+		stfsm_s25fl_prepare_erasesec_seq_32(&stfsm_seq_erase_sector);
+
+	} else {
+		/* Use default configurations for 24-bit addressing */
+		ret = stfsm_prepare_rwe_seqs_default(fsm);
+		if (ret)
+			return ret;
+	}
+
+	/*
+	 * For devices that support 'DYB' sector locking, check lock status and
+	 * unlock sectors if necessary (some variants power-on with sectors
+	 * locked by default)
+	 */
+	if (flags & FLASH_FLAG_DYB_LOCKING) {
+		offs = 0;
+		for (offs = 0; offs < info->sector_size * info->n_sectors;) {
+			stfsm_s25fl_read_dyb(fsm, offs, &dyb);
+			if (dyb == 0x00)
+				stfsm_s25fl_write_dyb(fsm, offs, 0xff);
+
+			/* Handle bottom/top 4KiB parameter sectors */
+			if ((offs < info->sector_size * 2) ||
+			    (offs >= (info->sector_size - info->n_sectors * 4)))
+				offs += 0x1000;
+			else
+				offs += 0x10000;
+		}
+	}
+
+	/* Check status of 'QE' bit, update if required. */
+	stfsm_read_status(fsm, SPINOR_OP_RDSR2, &cr1, 1);
+	data_pads = ((fsm->stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1;
+	if (data_pads == 4) {
+		if (!(cr1 & STFSM_S25FL_CONFIG_QE)) {
+			/* Set 'QE' */
+			cr1 |= STFSM_S25FL_CONFIG_QE;
+
+			update_sr = 1;
+		}
+	} else {
+		if (cr1 & STFSM_S25FL_CONFIG_QE) {
+			/* Clear 'QE' */
+			cr1 &= ~STFSM_S25FL_CONFIG_QE;
+
+			update_sr = 1;
+		}
+	}
+	if (update_sr) {
+		stfsm_read_status(fsm, SPINOR_OP_RDSR, &sr1, 1);
+		sta_wr = ((uint16_t)cr1  << 8) | sr1;
+		stfsm_write_status(fsm, SPINOR_OP_WRSR, sta_wr, 2, 1);
+	}
+
+	/*
+	 * S25FLxxx devices support Program and Error error flags.
+	 * Configure driver to check flags and clear if necessary.
+	 */
+	fsm->configuration |= CFG_S25FL_CHECK_ERROR_FLAGS;
+
+	return 0;
+}
+
+static int stfsm_w25q_config(struct stfsm *fsm)
+{
+	uint32_t data_pads;
+	uint8_t sr1, sr2;
+	uint16_t sr_wr;
+	int update_sr = 0;
+	int ret;
+
+	ret = stfsm_prepare_rwe_seqs_default(fsm);
+	if (ret)
+		return ret;
+
+	/* Check status of 'QE' bit, update if required. */
+	stfsm_read_status(fsm, SPINOR_OP_RDSR2, &sr2, 1);
+	data_pads = ((fsm->stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1;
+	if (data_pads == 4) {
+		if (!(sr2 & W25Q_STATUS_QE)) {
+			/* Set 'QE' */
+			sr2 |= W25Q_STATUS_QE;
+			update_sr = 1;
+		}
+	} else {
+		if (sr2 & W25Q_STATUS_QE) {
+			/* Clear 'QE' */
+			sr2 &= ~W25Q_STATUS_QE;
+			update_sr = 1;
+		}
+	}
+	if (update_sr) {
+		/* Write status register */
+		stfsm_read_status(fsm, SPINOR_OP_RDSR, &sr1, 1);
+		sr_wr = ((uint16_t)sr2 << 8) | sr1;
+		stfsm_write_status(fsm, SPINOR_OP_WRSR, sr_wr, 2, 1);
+	}
+
+	return 0;
+}
+
+static int stfsm_read(struct stfsm *fsm, uint8_t *buf, uint32_t size,
+		      uint32_t offset)
+{
+	struct stfsm_seq *seq = &fsm->stfsm_seq_read;
+	uint32_t data_pads;
+	uint32_t read_mask;
+	uint32_t size_ub;
+	uint32_t size_lb;
+	uint32_t size_mop;
+	uint32_t tmp[4];
+	uint32_t page_buf[FLASH_PAGESIZE_32];
+	uint8_t *p;
+
+	dev_dbg(fsm->dev, "reading %d bytes from 0x%08x\n", size, offset);
+
+	/* Enter 32-bit address mode, if required */
+	if (fsm->configuration & CFG_READ_TOGGLE_32BIT_ADDR)
+		stfsm_enter_32bit_addr(fsm, 1);
+
+	/* Must read in multiples of 32 cycles (or 32*pads/8 Bytes) */
+	data_pads = ((seq->seq_cfg >> 16) & 0x3) + 1;
+	read_mask = (data_pads << 2) - 1;
+
+	/* Handle non-aligned buf */
+	p = ((uintptr_t)buf & 0x3) ? (uint8_t *)page_buf : buf;
+
+	/* Handle non-aligned size */
+	size_ub = (size + read_mask) & ~read_mask;
+	size_lb = size & ~read_mask;
+	size_mop = size & read_mask;
+
+	seq->data_size = TRANSFER_SIZE(size_ub);
+	seq->addr1 = (offset >> 16) & 0xffff;
+	seq->addr2 = offset & 0xffff;
+
+	stfsm_load_seq(fsm, seq);
+
+	if (size_lb)
+		stfsm_read_fifo(fsm, (uint32_t *)p, size_lb);
+
+	if (size_mop) {
+		stfsm_read_fifo(fsm, tmp, read_mask + 1);
+		memcpy(p + size_lb, &tmp, size_mop);
+	}
+
+	/* Handle non-aligned buf */
+	if ((uintptr_t)buf & 0x3)
+		memcpy(buf, page_buf, size);
+
+	/* Wait for sequence to finish */
+	stfsm_wait_seq(fsm);
+
+	stfsm_clear_fifo(fsm);
+
+	/* Exit 32-bit address mode, if required */
+	if (fsm->configuration & CFG_READ_TOGGLE_32BIT_ADDR)
+		stfsm_enter_32bit_addr(fsm, 0);
+
+	return 0;
+}
+
+static int stfsm_write(struct stfsm *fsm, const uint8_t *buf,
+		       uint32_t size, uint32_t offset)
+{
+	struct stfsm_seq *seq = &fsm->stfsm_seq_write;
+	uint32_t data_pads;
+	uint32_t write_mask;
+	uint32_t size_ub;
+	uint32_t size_lb;
+	uint32_t size_mop;
+	uint32_t tmp[4];
+	uint32_t page_buf[FLASH_PAGESIZE_32];
+	uint8_t *t = (uint8_t *)&tmp;
+	const uint8_t *p;
+	int ret;
+	int i;
+
+	dev_dbg(fsm->dev, "writing %d bytes to 0x%08x\n", size, offset);
+
+	/* Enter 32-bit address mode, if required */
+	if (fsm->configuration & CFG_WRITE_TOGGLE_32BIT_ADDR)
+		stfsm_enter_32bit_addr(fsm, 1);
+
+	/* Must write in multiples of 32 cycles (or 32*pads/8 bytes) */
+	data_pads = ((seq->seq_cfg >> 16) & 0x3) + 1;
+	write_mask = (data_pads << 2) - 1;
+
+	/* Handle non-aligned buf */
+	if ((uintptr_t)buf & 0x3) {
+		memcpy(page_buf, buf, size);
+		p = (uint8_t *)page_buf;
+	} else {
+		p = buf;
+	}
+
+	/* Handle non-aligned size */
+	size_ub = (size + write_mask) & ~write_mask;
+	size_lb = size & ~write_mask;
+	size_mop = size & write_mask;
+
+	seq->data_size = TRANSFER_SIZE(size_ub);
+	seq->addr1 = (offset >> 16) & 0xffff;
+	seq->addr2 = offset & 0xffff;
+
+	/* Need to set FIFO to write mode, before writing data to FIFO (see
+	 * GNBvb79594)
+	 */
+	writel(0x00040000, fsm->base + SPI_FAST_SEQ_CFG);
+
+	/*
+	 * Before writing data to the FIFO, apply a small delay to allow a
+	 * potential change of FIFO direction to complete.
+	 */
+	if (fsm->fifo_dir_delay == 0)
+		readl(fsm->base + SPI_FAST_SEQ_CFG);
+	else
+		udelay(fsm->fifo_dir_delay);
+
+
+	/* Write data to FIFO, before starting sequence (see GNBvd79593) */
+	if (size_lb) {
+		stfsm_write_fifo(fsm, (uint32_t *)p, size_lb);
+		p += size_lb;
+	}
+
+	/* Handle non-aligned size */
+	if (size_mop) {
+		memset(t, 0xff, write_mask + 1);	/* fill with 0xff's */
+		for (i = 0; i < size_mop; i++)
+			t[i] = *p++;
+
+		stfsm_write_fifo(fsm, tmp, write_mask + 1);
+	}
+
+	/* Start sequence */
+	stfsm_load_seq(fsm, seq);
+
+	/* Wait for sequence to finish */
+	stfsm_wait_seq(fsm);
+
+	/* Wait for completion */
+	ret = stfsm_wait_busy(fsm);
+	if (ret && fsm->configuration & CFG_S25FL_CHECK_ERROR_FLAGS)
+		stfsm_s25fl_clear_status_reg(fsm);
+
+	/* Exit 32-bit address mode, if required */
+	if (fsm->configuration & CFG_WRITE_TOGGLE_32BIT_ADDR)
+		stfsm_enter_32bit_addr(fsm, 0);
+
+	return 0;
+}
+
+/*
+ * Read an address range from the flash chip. The address range
+ * may be any size provided it is within the physical boundaries.
+ */
+static int stfsm_mtd_read(struct mtd_info *mtd, loff_t from, size_t len,
+			  size_t *retlen, u_char *buf)
+{
+	struct stfsm *fsm = dev_get_drvdata(mtd->dev.parent);
+	uint32_t bytes;
+
+	dev_dbg(fsm->dev, "%s from 0x%08x, len %zd\n",
+		__func__, (u32)from, len);
+
+	mutex_lock(&fsm->lock);
+
+	while (len > 0) {
+		bytes = min_t(size_t, len, FLASH_PAGESIZE);
+
+		stfsm_read(fsm, buf, bytes, from);
+
+		buf += bytes;
+		from += bytes;
+		len -= bytes;
+
+		*retlen += bytes;
+	}
+
+	mutex_unlock(&fsm->lock);
+
+	return 0;
+}
+
+static int stfsm_erase_sector(struct stfsm *fsm, uint32_t offset)
+{
+	struct stfsm_seq *seq = &stfsm_seq_erase_sector;
+	int ret;
+
+	dev_dbg(fsm->dev, "erasing sector at 0x%08x\n", offset);
+
+	/* Enter 32-bit address mode, if required */
+	if (fsm->configuration & CFG_ERASESEC_TOGGLE_32BIT_ADDR)
+		stfsm_enter_32bit_addr(fsm, 1);
+
+	seq->addr1 = (offset >> 16) & 0xffff;
+	seq->addr2 = offset & 0xffff;
+
+	stfsm_load_seq(fsm, seq);
+
+	stfsm_wait_seq(fsm);
+
+	/* Wait for completion */
+	ret = stfsm_wait_busy(fsm);
+	if (ret && fsm->configuration & CFG_S25FL_CHECK_ERROR_FLAGS)
+		stfsm_s25fl_clear_status_reg(fsm);
+
+	/* Exit 32-bit address mode, if required */
+	if (fsm->configuration & CFG_ERASESEC_TOGGLE_32BIT_ADDR)
+		stfsm_enter_32bit_addr(fsm, 0);
+
+	return ret;
+}
+
+static int stfsm_erase_chip(struct stfsm *fsm)
+{
+	const struct stfsm_seq *seq = &stfsm_seq_erase_chip;
+
+	dev_dbg(fsm->dev, "erasing chip\n");
+
+	stfsm_load_seq(fsm, seq);
+
+	stfsm_wait_seq(fsm);
+
+	return stfsm_wait_busy(fsm);
+}
+
+/*
+ * Write an address range to the flash chip.  Data must be written in
+ * FLASH_PAGESIZE chunks.  The address range may be any size provided
+ * it is within the physical boundaries.
+ */
+static int stfsm_mtd_write(struct mtd_info *mtd, loff_t to, size_t len,
+			   size_t *retlen, const u_char *buf)
+{
+	struct stfsm *fsm = dev_get_drvdata(mtd->dev.parent);
+
+	u32 page_offs;
+	u32 bytes;
+	uint8_t *b = (uint8_t *)buf;
+	int ret = 0;
+
+	dev_dbg(fsm->dev, "%s to 0x%08x, len %zd\n", __func__, (u32)to, len);
+
+	/* Offset within page */
+	page_offs = to % FLASH_PAGESIZE;
+
+	mutex_lock(&fsm->lock);
+
+	while (len) {
+		/* Write up to page boundary */
+		bytes = min_t(size_t, FLASH_PAGESIZE - page_offs, len);
+
+		ret = stfsm_write(fsm, b, bytes, to);
+		if (ret)
+			goto out1;
+
+		b += bytes;
+		len -= bytes;
+		to += bytes;
+
+		/* We are now page-aligned */
+		page_offs = 0;
+
+		*retlen += bytes;
+
+	}
+
+out1:
+	mutex_unlock(&fsm->lock);
+
+	return ret;
+}
+
+/*
+ * Erase an address range on the flash chip. The address range may extend
+ * one or more erase sectors.  Return an error is there is a problem erasing.
+ */
+static int stfsm_mtd_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+	struct stfsm *fsm = dev_get_drvdata(mtd->dev.parent);
+	u32 addr, len;
+	int ret;
+
+	dev_dbg(fsm->dev, "%s at 0x%llx, len %lld\n", __func__,
+		(long long)instr->addr, (long long)instr->len);
+
+	addr = instr->addr;
+	len = instr->len;
+
+	mutex_lock(&fsm->lock);
+
+	/* Whole-chip erase? */
+	if (len == mtd->size) {
+		ret = stfsm_erase_chip(fsm);
+		if (ret)
+			goto out1;
+	} else {
+		while (len) {
+			ret = stfsm_erase_sector(fsm, addr);
+			if (ret)
+				goto out1;
+
+			addr += mtd->erasesize;
+			len -= mtd->erasesize;
+		}
+	}
+
+	mutex_unlock(&fsm->lock);
+
+	instr->state = MTD_ERASE_DONE;
+	mtd_erase_callback(instr);
+
+	return 0;
+
+out1:
+	instr->state = MTD_ERASE_FAILED;
+	mutex_unlock(&fsm->lock);
+
+	return ret;
+}
+
+static void stfsm_read_jedec(struct stfsm *fsm, uint8_t *jedec)
+{
+	const struct stfsm_seq *seq = &stfsm_seq_read_jedec;
+	uint32_t tmp[2];
+
+	stfsm_load_seq(fsm, seq);
+
+	stfsm_read_fifo(fsm, tmp, 8);
+
+	memcpy(jedec, tmp, 5);
+
+	stfsm_wait_seq(fsm);
+}
+
+static struct flash_info *stfsm_jedec_probe(struct stfsm *fsm)
+{
+	struct flash_info	*info;
+	u16                     ext_jedec;
+	u32			jedec;
+	u8			id[5];
+
+	stfsm_read_jedec(fsm, id);
+
+	jedec     = id[0] << 16 | id[1] << 8 | id[2];
+	/*
+	 * JEDEC also defines an optional "extended device information"
+	 * string for after vendor-specific data, after the three bytes
+	 * we use here. Supporting some chips might require using it.
+	 */
+	ext_jedec = id[3] << 8  | id[4];
+
+	dev_dbg(fsm->dev, "JEDEC =  0x%08x [%02x %02x %02x %02x %02x]\n",
+		jedec, id[0], id[1], id[2], id[3], id[4]);
+
+	for (info = flash_types; info->name; info++) {
+		if (info->jedec_id == jedec) {
+			if (info->ext_id && info->ext_id != ext_jedec)
+				continue;
+			return info;
+		}
+	}
+	dev_err(fsm->dev, "Unrecognized JEDEC id %06x\n", jedec);
+
+	return NULL;
+}
+
+static int stfsm_set_mode(struct stfsm *fsm, uint32_t mode)
+{
+	int ret, timeout = 10;
+
+	/* Wait for controller to accept mode change */
+	while (--timeout) {
+		ret = readl(fsm->base + SPI_STA_MODE_CHANGE);
+		if (ret & 0x1)
+			break;
+		udelay(1);
+	}
+
+	if (!timeout)
+		return -EBUSY;
+
+	writel(mode, fsm->base + SPI_MODESELECT);
+
+	return 0;
+}
+
+static void stfsm_set_freq(struct stfsm *fsm, uint32_t spi_freq)
+{
+	uint32_t emi_freq;
+	uint32_t clk_div;
+
+	/* TODO: Make this dynamic */
+	emi_freq = STFSM_DEFAULT_EMI_FREQ;
+
+	/*
+	 * Calculate clk_div - values between 2 and 128
+	 * Multiple of 2, rounded up
+	 */
+	clk_div = 2 * DIV_ROUND_UP(emi_freq, 2 * spi_freq);
+	if (clk_div < 2)
+		clk_div = 2;
+	else if (clk_div > 128)
+		clk_div = 128;
+
+	/*
+	 * Determine a suitable delay for the IP to complete a change of
+	 * direction of the FIFO. The required delay is related to the clock
+	 * divider used. The following heuristics are based on empirical tests,
+	 * using a 100MHz EMI clock.
+	 */
+	if (clk_div <= 4)
+		fsm->fifo_dir_delay = 0;
+	else if (clk_div <= 10)
+		fsm->fifo_dir_delay = 1;
+	else
+		fsm->fifo_dir_delay = DIV_ROUND_UP(clk_div, 10);
+
+	dev_dbg(fsm->dev, "emi_clk = %uHZ, spi_freq = %uHZ, clk_div = %u\n",
+		emi_freq, spi_freq, clk_div);
+
+	writel(clk_div, fsm->base + SPI_CLOCKDIV);
+}
+
+static int stfsm_init(struct stfsm *fsm)
+{
+	int ret;
+
+	/* Perform a soft reset of the FSM controller */
+	writel(SEQ_CFG_SWRESET, fsm->base + SPI_FAST_SEQ_CFG);
+	udelay(1);
+	writel(0, fsm->base + SPI_FAST_SEQ_CFG);
+
+	/* Set clock to 'safe' frequency initially */
+	stfsm_set_freq(fsm, STFSM_FLASH_SAFE_FREQ);
+
+	/* Switch to FSM */
+	ret = stfsm_set_mode(fsm, SPI_MODESELECT_FSM);
+	if (ret)
+		return ret;
+
+	/* Set timing parameters */
+	writel(SPI_CFG_DEVICE_ST            |
+	       SPI_CFG_DEFAULT_MIN_CS_HIGH  |
+	       SPI_CFG_DEFAULT_CS_SETUPHOLD |
+	       SPI_CFG_DEFAULT_DATA_HOLD,
+	       fsm->base + SPI_CONFIGDATA);
+	writel(STFSM_DEFAULT_WR_TIME, fsm->base + SPI_STATUS_WR_TIME_REG);
+
+	/*
+	 * Set the FSM 'WAIT' delay to the minimum workable value.  Note, for
+	 * our purposes, the WAIT instruction is used purely to achieve
+	 * "sequence validity" rather than actually implement a delay.
+	 */
+	writel(0x00000001, fsm->base + SPI_PROGRAM_ERASE_TIME);
+
+	/* Clear FIFO, just in case */
+	stfsm_clear_fifo(fsm);
+
+	return 0;
+}
+
+static void stfsm_fetch_platform_configs(struct platform_device *pdev)
+{
+	struct stfsm *fsm = platform_get_drvdata(pdev);
+	struct device_node *np = pdev->dev.of_node;
+	struct regmap *regmap;
+	uint32_t boot_device_reg;
+	uint32_t boot_device_spi;
+	uint32_t boot_device;     /* Value we read from *boot_device_reg */
+	int ret;
+
+	/* Booting from SPI NOR Flash is the default */
+	fsm->booted_from_spi = true;
+
+	regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
+	if (IS_ERR(regmap))
+		goto boot_device_fail;
+
+	fsm->reset_signal = of_property_read_bool(np, "st,reset-signal");
+
+	fsm->reset_por = of_property_read_bool(np, "st,reset-por");
+
+	/* Where in the syscon the boot device information lives */
+	ret = of_property_read_u32(np, "st,boot-device-reg", &boot_device_reg);
+	if (ret)
+		goto boot_device_fail;
+
+	/* Boot device value when booted from SPI NOR */
+	ret = of_property_read_u32(np, "st,boot-device-spi", &boot_device_spi);
+	if (ret)
+		goto boot_device_fail;
+
+	ret = regmap_read(regmap, boot_device_reg, &boot_device);
+	if (ret)
+		goto boot_device_fail;
+
+	if (boot_device != boot_device_spi)
+		fsm->booted_from_spi = false;
+
+	return;
+
+boot_device_fail:
+	dev_warn(&pdev->dev,
+		 "failed to fetch boot device, assuming boot from SPI\n");
+}
+
+static int stfsm_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct mtd_part_parser_data ppdata;
+	struct flash_info *info;
+	struct resource *res;
+	struct stfsm *fsm;
+	int ret;
+
+	if (!np) {
+		dev_err(&pdev->dev, "No DT found\n");
+		return -EINVAL;
+	}
+	ppdata.of_node = np;
+
+	fsm = devm_kzalloc(&pdev->dev, sizeof(*fsm), GFP_KERNEL);
+	if (!fsm)
+		return -ENOMEM;
+
+	fsm->dev = &pdev->dev;
+
+	platform_set_drvdata(pdev, fsm);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Resource not found\n");
+		return -ENODEV;
+	}
+
+	fsm->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(fsm->base)) {
+		dev_err(&pdev->dev,
+			"Failed to reserve memory region %pR\n", res);
+		return PTR_ERR(fsm->base);
+	}
+
+	mutex_init(&fsm->lock);
+
+	ret = stfsm_init(fsm);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to initialise FSM Controller\n");
+		return ret;
+	}
+
+	stfsm_fetch_platform_configs(pdev);
+
+	/* Detect SPI FLASH device */
+	info = stfsm_jedec_probe(fsm);
+	if (!info)
+		return -ENODEV;
+	fsm->info = info;
+
+	/* Use device size to determine address width */
+	if (info->sector_size * info->n_sectors > 0x1000000)
+		info->flags |= FLASH_FLAG_32BIT_ADDR;
+
+	/*
+	 * Configure READ/WRITE/ERASE sequences according to platform and
+	 * device flags.
+	 */
+	if (info->config) {
+		ret = info->config(fsm);
+		if (ret)
+			return ret;
+	} else {
+		ret = stfsm_prepare_rwe_seqs_default(fsm);
+		if (ret)
+			return ret;
+	}
+
+	fsm->mtd.name		= info->name;
+	fsm->mtd.dev.parent	= &pdev->dev;
+	fsm->mtd.type		= MTD_NORFLASH;
+	fsm->mtd.writesize	= 4;
+	fsm->mtd.writebufsize	= fsm->mtd.writesize;
+	fsm->mtd.flags		= MTD_CAP_NORFLASH;
+	fsm->mtd.size		= info->sector_size * info->n_sectors;
+	fsm->mtd.erasesize	= info->sector_size;
+
+	fsm->mtd._read  = stfsm_mtd_read;
+	fsm->mtd._write = stfsm_mtd_write;
+	fsm->mtd._erase = stfsm_mtd_erase;
+
+	dev_info(&pdev->dev,
+		"Found serial flash device: %s\n"
+		" size = %llx (%lldMiB) erasesize = 0x%08x (%uKiB)\n",
+		info->name,
+		(long long)fsm->mtd.size, (long long)(fsm->mtd.size >> 20),
+		fsm->mtd.erasesize, (fsm->mtd.erasesize >> 10));
+
+	return mtd_device_parse_register(&fsm->mtd, NULL, &ppdata, NULL, 0);
+}
+
+static int stfsm_remove(struct platform_device *pdev)
+{
+	struct stfsm *fsm = platform_get_drvdata(pdev);
+
+	return mtd_device_unregister(&fsm->mtd);
+}
+
+static const struct of_device_id stfsm_match[] = {
+	{ .compatible = "st,spi-fsm", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, stfsm_match);
+
+static struct platform_driver stfsm_driver = {
+	.probe		= stfsm_probe,
+	.remove		= stfsm_remove,
+	.driver		= {
+		.name	= "st-spi-fsm",
+		.owner	= THIS_MODULE,
+		.of_match_table = stfsm_match,
+	},
+};
+module_platform_driver(stfsm_driver);
+
+MODULE_AUTHOR("Angus Clark <angus.clark@st.com>");
+MODULE_DESCRIPTION("ST SPI FSM driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c
index 62da9eb7032..19d637266fc 100644
--- a/drivers/mtd/ftl.c
+++ b/drivers/mtd/ftl.c
@@ -26,7 +26,7 @@
 
     The initial developer of the original code is David A. Hinds
     <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
-    are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
+    are Copyright © 1999 David A. Hinds.  All Rights Reserved.
 
     Alternatively, the contents of this file may be used under the
     terms of the GNU General Public License version 2 (the "GPL"), in
@@ -51,7 +51,7 @@
 
     Use of the FTL format for non-PCMCIA applications may be an
     infringement of these patents.  For additional information,
-    contact M-Systems (http://www.m-sys.com) directly.
+    contact M-Systems directly. M-Systems since acquired by Sandisk. 
 
 ======================================================================*/
 #include <linux/mtd/blktrans.h>
@@ -168,8 +168,8 @@ static int scan_header(partition_t *part)
 	 (offset + sizeof(header)) < max_offset;
 	 offset += part->mbd.mtd->erasesize ? : 0x2000) {
 
-	err = part->mbd.mtd->read(part->mbd.mtd, offset, sizeof(header), &ret,
-			      (unsigned char *)&header);
+	err = mtd_read(part->mbd.mtd, offset, sizeof(header), &ret,
+                       (unsigned char *)&header);
 
 	if (err)
 	    return err;
@@ -224,8 +224,8 @@ static int build_maps(partition_t *part)
     for (i = 0; i < le16_to_cpu(part->header.NumEraseUnits); i++) {
 	offset = ((i + le16_to_cpu(part->header.FirstPhysicalEUN))
 		      << part->header.EraseUnitSize);
-	ret = part->mbd.mtd->read(part->mbd.mtd, offset, sizeof(header), &retval,
-			      (unsigned char *)&header);
+	ret = mtd_read(part->mbd.mtd, offset, sizeof(header), &retval,
+                       (unsigned char *)&header);
 
 	if (ret)
 	    goto out_XferInfo;
@@ -289,9 +289,9 @@ static int build_maps(partition_t *part)
 	part->EUNInfo[i].Deleted = 0;
 	offset = part->EUNInfo[i].Offset + le32_to_cpu(header.BAMOffset);
 
-	ret = part->mbd.mtd->read(part->mbd.mtd, offset,
-			      part->BlocksPerUnit * sizeof(uint32_t), &retval,
-			      (unsigned char *)part->bam_cache);
+	ret = mtd_read(part->mbd.mtd, offset,
+                       part->BlocksPerUnit * sizeof(uint32_t), &retval,
+                       (unsigned char *)part->bam_cache);
 
 	if (ret)
 		goto out_bam_cache;
@@ -339,7 +339,7 @@ static int erase_xfer(partition_t *part,
     struct erase_info *erase;
 
     xfer = &part->XferInfo[xfernum];
-    DEBUG(1, "ftl_cs: erasing xfer unit at 0x%x\n", xfer->Offset);
+    pr_debug("ftl_cs: erasing xfer unit at 0x%x\n", xfer->Offset);
     xfer->state = XFER_ERASING;
 
     /* Is there a free erase slot? Always in MTD. */
@@ -355,7 +355,7 @@ static int erase_xfer(partition_t *part,
     erase->len = 1 << part->header.EraseUnitSize;
     erase->priv = (u_long)part;
 
-    ret = part->mbd.mtd->erase(part->mbd.mtd, erase);
+    ret = mtd_erase(part->mbd.mtd, erase);
 
     if (!ret)
 	    xfer->EraseCount++;
@@ -415,15 +415,15 @@ static int prepare_xfer(partition_t *part, int i)
     xfer = &part->XferInfo[i];
     xfer->state = XFER_FAILED;
 
-    DEBUG(1, "ftl_cs: preparing xfer unit at 0x%x\n", xfer->Offset);
+    pr_debug("ftl_cs: preparing xfer unit at 0x%x\n", xfer->Offset);
 
     /* Write the transfer unit header */
     header = part->header;
     header.LogicalEUN = cpu_to_le16(0xffff);
     header.EraseCount = cpu_to_le32(xfer->EraseCount);
 
-    ret = part->mbd.mtd->write(part->mbd.mtd, xfer->Offset, sizeof(header),
-			   &retlen, (u_char *)&header);
+    ret = mtd_write(part->mbd.mtd, xfer->Offset, sizeof(header), &retlen,
+                    (u_char *)&header);
 
     if (ret) {
 	return ret;
@@ -438,8 +438,8 @@ static int prepare_xfer(partition_t *part, int i)
 
     for (i = 0; i < nbam; i++, offset += sizeof(uint32_t)) {
 
-	ret = part->mbd.mtd->write(part->mbd.mtd, offset, sizeof(uint32_t),
-			       &retlen, (u_char *)&ctl);
+	ret = mtd_write(part->mbd.mtd, offset, sizeof(uint32_t), &retlen,
+                        (u_char *)&ctl);
 
 	if (ret)
 	    return ret;
@@ -476,7 +476,7 @@ static int copy_erase_unit(partition_t *part, uint16_t srcunit,
 
     eun = &part->EUNInfo[srcunit];
     xfer = &part->XferInfo[xferunit];
-    DEBUG(2, "ftl_cs: copying block 0x%x to 0x%x\n",
+    pr_debug("ftl_cs: copying block 0x%x to 0x%x\n",
 	  eun->Offset, xfer->Offset);
 
 
@@ -485,9 +485,9 @@ static int copy_erase_unit(partition_t *part, uint16_t srcunit,
 
 	offset = eun->Offset + le32_to_cpu(part->header.BAMOffset);
 
-	ret = part->mbd.mtd->read(part->mbd.mtd, offset,
-			      part->BlocksPerUnit * sizeof(uint32_t),
-			      &retlen, (u_char *) (part->bam_cache));
+	ret = mtd_read(part->mbd.mtd, offset,
+                       part->BlocksPerUnit * sizeof(uint32_t), &retlen,
+                       (u_char *)(part->bam_cache));
 
 	/* mark the cache bad, in case we get an error later */
 	part->bam_index = 0xffff;
@@ -503,8 +503,8 @@ static int copy_erase_unit(partition_t *part, uint16_t srcunit,
     offset = xfer->Offset + 20; /* Bad! */
     unit = cpu_to_le16(0x7fff);
 
-    ret = part->mbd.mtd->write(part->mbd.mtd, offset, sizeof(uint16_t),
-			   &retlen, (u_char *) &unit);
+    ret = mtd_write(part->mbd.mtd, offset, sizeof(uint16_t), &retlen,
+                    (u_char *)&unit);
 
     if (ret) {
 	printk( KERN_WARNING "ftl: Failed to write back to BAM cache in copy_erase_unit()!\n");
@@ -523,16 +523,16 @@ static int copy_erase_unit(partition_t *part, uint16_t srcunit,
 	    break;
 	case BLOCK_DATA:
 	case BLOCK_REPLACEMENT:
-	    ret = part->mbd.mtd->read(part->mbd.mtd, src, SECTOR_SIZE,
-                        &retlen, (u_char *) buf);
+	    ret = mtd_read(part->mbd.mtd, src, SECTOR_SIZE, &retlen,
+                           (u_char *)buf);
 	    if (ret) {
 		printk(KERN_WARNING "ftl: Error reading old xfer unit in copy_erase_unit\n");
 		return ret;
             }
 
 
-	    ret = part->mbd.mtd->write(part->mbd.mtd, dest, SECTOR_SIZE,
-                        &retlen, (u_char *) buf);
+	    ret = mtd_write(part->mbd.mtd, dest, SECTOR_SIZE, &retlen,
+                            (u_char *)buf);
 	    if (ret)  {
 		printk(KERN_WARNING "ftl: Error writing new xfer unit in copy_erase_unit\n");
 		return ret;
@@ -550,9 +550,11 @@ static int copy_erase_unit(partition_t *part, uint16_t srcunit,
     }
 
     /* Write the BAM to the transfer unit */
-    ret = part->mbd.mtd->write(part->mbd.mtd, xfer->Offset + le32_to_cpu(part->header.BAMOffset),
-                    part->BlocksPerUnit * sizeof(int32_t), &retlen,
-		    (u_char *)part->bam_cache);
+    ret = mtd_write(part->mbd.mtd,
+                    xfer->Offset + le32_to_cpu(part->header.BAMOffset),
+                    part->BlocksPerUnit * sizeof(int32_t),
+                    &retlen,
+                    (u_char *)part->bam_cache);
     if (ret) {
 	printk( KERN_WARNING "ftl: Error writing BAM in copy_erase_unit\n");
 	return ret;
@@ -560,8 +562,8 @@ static int copy_erase_unit(partition_t *part, uint16_t srcunit,
 
 
     /* All clear? Then update the LogicalEUN again */
-    ret = part->mbd.mtd->write(part->mbd.mtd, xfer->Offset + 20, sizeof(uint16_t),
-			   &retlen, (u_char *)&srcunitswap);
+    ret = mtd_write(part->mbd.mtd, xfer->Offset + 20, sizeof(uint16_t),
+                    &retlen, (u_char *)&srcunitswap);
 
     if (ret) {
 	printk(KERN_WARNING "ftl: Error writing new LogicalEUN in copy_erase_unit\n");
@@ -598,7 +600,7 @@ static int copy_erase_unit(partition_t *part, uint16_t srcunit,
     unit with the fewest erases, and usually pick the data unit with
     the most deleted blocks.  But with a small probability, pick the
     oldest data unit instead.  This means that we generally postpone
-    the next reclaimation as long as possible, but shuffle static
+    the next reclamation as long as possible, but shuffle static
     stuff around a bit for wear leveling.
 
 ======================================================================*/
@@ -609,8 +611,8 @@ static int reclaim_block(partition_t *part)
     uint32_t best;
     int queued, ret;
 
-    DEBUG(0, "ftl_cs: reclaiming space...\n");
-    DEBUG(3, "NumTransferUnits == %x\n", part->header.NumTransferUnits);
+    pr_debug("ftl_cs: reclaiming space...\n");
+    pr_debug("NumTransferUnits == %x\n", part->header.NumTransferUnits);
     /* Pick the least erased transfer unit */
     best = 0xffffffff; xfer = 0xffff;
     do {
@@ -618,22 +620,22 @@ static int reclaim_block(partition_t *part)
 	for (i = 0; i < part->header.NumTransferUnits; i++) {
 	    int n=0;
 	    if (part->XferInfo[i].state == XFER_UNKNOWN) {
-		DEBUG(3,"XferInfo[%d].state == XFER_UNKNOWN\n",i);
+		pr_debug("XferInfo[%d].state == XFER_UNKNOWN\n",i);
 		n=1;
 		erase_xfer(part, i);
 	    }
 	    if (part->XferInfo[i].state == XFER_ERASING) {
-		DEBUG(3,"XferInfo[%d].state == XFER_ERASING\n",i);
+		pr_debug("XferInfo[%d].state == XFER_ERASING\n",i);
 		n=1;
 		queued = 1;
 	    }
 	    else if (part->XferInfo[i].state == XFER_ERASED) {
-		DEBUG(3,"XferInfo[%d].state == XFER_ERASED\n",i);
+		pr_debug("XferInfo[%d].state == XFER_ERASED\n",i);
 		n=1;
 		prepare_xfer(part, i);
 	    }
 	    if (part->XferInfo[i].state == XFER_PREPARED) {
-		DEBUG(3,"XferInfo[%d].state == XFER_PREPARED\n",i);
+		pr_debug("XferInfo[%d].state == XFER_PREPARED\n",i);
 		n=1;
 		if (part->XferInfo[i].EraseCount <= best) {
 		    best = part->XferInfo[i].EraseCount;
@@ -641,22 +643,21 @@ static int reclaim_block(partition_t *part)
 		}
 	    }
 		if (!n)
-		    DEBUG(3,"XferInfo[%d].state == %x\n",i, part->XferInfo[i].state);
+		    pr_debug("XferInfo[%d].state == %x\n",i, part->XferInfo[i].state);
 
 	}
 	if (xfer == 0xffff) {
 	    if (queued) {
-		DEBUG(1, "ftl_cs: waiting for transfer "
+		pr_debug("ftl_cs: waiting for transfer "
 		      "unit to be prepared...\n");
-		if (part->mbd.mtd->sync)
-			part->mbd.mtd->sync(part->mbd.mtd);
+		mtd_sync(part->mbd.mtd);
 	    } else {
 		static int ne = 0;
 		if (++ne < 5)
 		    printk(KERN_NOTICE "ftl_cs: reclaim failed: no "
 			   "suitable transfer units!\n");
 		else
-		    DEBUG(1, "ftl_cs: reclaim failed: no "
+		    pr_debug("ftl_cs: reclaim failed: no "
 			  "suitable transfer units!\n");
 
 		return -EIO;
@@ -666,7 +667,7 @@ static int reclaim_block(partition_t *part)
 
     eun = 0;
     if ((jiffies % shuffle_freq) == 0) {
-	DEBUG(1, "ftl_cs: recycling freshest block...\n");
+	pr_debug("ftl_cs: recycling freshest block...\n");
 	best = 0xffffffff;
 	for (i = 0; i < part->DataUnits; i++)
 	    if (part->EUNInfo[i].EraseCount <= best) {
@@ -686,7 +687,7 @@ static int reclaim_block(partition_t *part)
 		printk(KERN_NOTICE "ftl_cs: reclaim failed: "
 		       "no free blocks!\n");
 	    else
-		DEBUG(1,"ftl_cs: reclaim failed: "
+		pr_debug("ftl_cs: reclaim failed: "
 		       "no free blocks!\n");
 
 	    return -EIO;
@@ -747,10 +748,11 @@ static uint32_t find_free(partition_t *part)
 	/* Invalidate cache */
 	part->bam_index = 0xffff;
 
-	ret = part->mbd.mtd->read(part->mbd.mtd,
-		       part->EUNInfo[eun].Offset + le32_to_cpu(part->header.BAMOffset),
-		       part->BlocksPerUnit * sizeof(uint32_t),
-		       &retlen, (u_char *) (part->bam_cache));
+	ret = mtd_read(part->mbd.mtd,
+                       part->EUNInfo[eun].Offset + le32_to_cpu(part->header.BAMOffset),
+                       part->BlocksPerUnit * sizeof(uint32_t),
+                       &retlen,
+                       (u_char *)(part->bam_cache));
 
 	if (ret) {
 	    printk(KERN_WARNING"ftl: Error reading BAM in find_free\n");
@@ -771,7 +773,7 @@ static uint32_t find_free(partition_t *part)
 	printk(KERN_NOTICE "ftl_cs: bad free list!\n");
 	return 0;
     }
-    DEBUG(2, "ftl_cs: found free block at %d in %d\n", blk, eun);
+    pr_debug("ftl_cs: found free block at %d in %d\n", blk, eun);
     return blk;
 
 } /* find_free */
@@ -791,7 +793,7 @@ static int ftl_read(partition_t *part, caddr_t buffer,
     int ret;
     size_t offset, retlen;
 
-    DEBUG(2, "ftl_cs: ftl_read(0x%p, 0x%lx, %ld)\n",
+    pr_debug("ftl_cs: ftl_read(0x%p, 0x%lx, %ld)\n",
 	  part, sector, nblocks);
     if (!(part->state & FTL_FORMATTED)) {
 	printk(KERN_NOTICE "ftl_cs: bad partition\n");
@@ -810,8 +812,8 @@ static int ftl_read(partition_t *part, caddr_t buffer,
 	else {
 	    offset = (part->EUNInfo[log_addr / bsize].Offset
 			  + (log_addr % bsize));
-	    ret = part->mbd.mtd->read(part->mbd.mtd, offset, SECTOR_SIZE,
-			   &retlen, (u_char *) buffer);
+	    ret = mtd_read(part->mbd.mtd, offset, SECTOR_SIZE, &retlen,
+                           (u_char *)buffer);
 
 	    if (ret) {
 		printk(KERN_WARNING "Error reading MTD device in ftl_read()\n");
@@ -840,7 +842,7 @@ static int set_bam_entry(partition_t *part, uint32_t log_addr,
     int ret;
     size_t retlen, offset;
 
-    DEBUG(2, "ftl_cs: set_bam_entry(0x%p, 0x%x, 0x%x)\n",
+    pr_debug("ftl_cs: set_bam_entry(0x%p, 0x%x, 0x%x)\n",
 	  part, log_addr, virt_addr);
     bsize = 1 << part->header.EraseUnitSize;
     eun = log_addr / bsize;
@@ -849,8 +851,8 @@ static int set_bam_entry(partition_t *part, uint32_t log_addr,
 		  le32_to_cpu(part->header.BAMOffset));
 
 #ifdef PSYCHO_DEBUG
-    ret = part->mbd.mtd->read(part->mbd.mtd, offset, sizeof(uint32_t),
-                        &retlen, (u_char *)&old_addr);
+    ret = mtd_read(part->mbd.mtd, offset, sizeof(uint32_t), &retlen,
+                   (u_char *)&old_addr);
     if (ret) {
 	printk(KERN_WARNING"ftl: Error reading old_addr in set_bam_entry: %d\n",ret);
 	return ret;
@@ -886,8 +888,8 @@ static int set_bam_entry(partition_t *part, uint32_t log_addr,
 #endif
 	part->bam_cache[blk] = le_virt_addr;
     }
-    ret = part->mbd.mtd->write(part->mbd.mtd, offset, sizeof(uint32_t),
-                            &retlen, (u_char *)&le_virt_addr);
+    ret = mtd_write(part->mbd.mtd, offset, sizeof(uint32_t), &retlen,
+                    (u_char *)&le_virt_addr);
 
     if (ret) {
 	printk(KERN_NOTICE "ftl_cs: set_bam_entry() failed!\n");
@@ -905,7 +907,7 @@ static int ftl_write(partition_t *part, caddr_t buffer,
     int ret;
     size_t retlen, offset;
 
-    DEBUG(2, "ftl_cs: ftl_write(0x%p, %ld, %ld)\n",
+    pr_debug("ftl_cs: ftl_write(0x%p, %ld, %ld)\n",
 	  part, sector, nblocks);
     if (!(part->state & FTL_FORMATTED)) {
 	printk(KERN_NOTICE "ftl_cs: bad partition\n");
@@ -946,8 +948,7 @@ static int ftl_write(partition_t *part, caddr_t buffer,
 	part->EUNInfo[part->bam_index].Deleted++;
 	offset = (part->EUNInfo[part->bam_index].Offset +
 		      blk * SECTOR_SIZE);
-	ret = part->mbd.mtd->write(part->mbd.mtd, offset, SECTOR_SIZE, &retlen,
-                                     buffer);
+	ret = mtd_write(part->mbd.mtd, offset, SECTOR_SIZE, &retlen, buffer);
 
 	if (ret) {
 	    printk(KERN_NOTICE "ftl_cs: block write failed!\n");
@@ -1011,7 +1012,7 @@ static int ftl_discardsect(struct mtd_blktrans_dev *dev,
 	partition_t *part = (void *)dev;
 	uint32_t bsize = 1 << part->header.EraseUnitSize;
 
-	DEBUG(1, "FTL erase sector %ld for %d sectors\n",
+	pr_debug("FTL erase sector %ld for %d sectors\n",
 	      sector, nr_sects);
 
 	while (nr_sects) {
diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c
index 015a7fe1b6e..b66b541877f 100644
--- a/drivers/mtd/inftlcore.c
+++ b/drivers/mtd/inftlcore.c
@@ -1,11 +1,11 @@
 /*
  * inftlcore.c -- Linux driver for Inverse Flash Translation Layer (INFTL)
  *
- * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
+ * Copyright © 2002, Greg Ungerer (gerg@snapgear.com)
  *
  * Based heavily on the nftlcore.c code which is:
- * (c) 1999 Machine Vision Holdings, Inc.
- * Author: David Woodhouse <dwmw2@infradead.org>
+ * Copyright © 1999 Machine Vision Holdings, Inc.
+ * Copyright © 1999 David Woodhouse <dwmw2@infradead.org>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -50,27 +50,25 @@ static void inftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
 	struct INFTLrecord *inftl;
 	unsigned long temp;
 
-	if (mtd->type != MTD_NANDFLASH || mtd->size > UINT_MAX)
+	if (!mtd_type_is_nand(mtd) || mtd->size > UINT_MAX)
 		return;
 	/* OK, this is moderately ugly.  But probably safe.  Alternatives? */
 	if (memcmp(mtd->name, "DiskOnChip", 10))
 		return;
 
-	if (!mtd->block_isbad) {
+	if (!mtd->_block_isbad) {
 		printk(KERN_ERR
 "INFTL no longer supports the old DiskOnChip drivers loaded via docprobe.\n"
 "Please use the new diskonchip driver under the NAND subsystem.\n");
 		return;
 	}
 
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: add_mtd for %s\n", mtd->name);
+	pr_debug("INFTL: add_mtd for %s\n", mtd->name);
 
 	inftl = kzalloc(sizeof(*inftl), GFP_KERNEL);
 
-	if (!inftl) {
-		printk(KERN_WARNING "INFTL: Out of memory for data structures\n");
+	if (!inftl)
 		return;
-	}
 
 	inftl->mbd.mtd = mtd;
 	inftl->mbd.devnum = -1;
@@ -133,7 +131,7 @@ static void inftl_remove_dev(struct mtd_blktrans_dev *dev)
 {
 	struct INFTLrecord *inftl = (void *)dev;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: remove_dev (i=%d)\n", dev->devnum);
+	pr_debug("INFTL: remove_dev (i=%d)\n", dev->devnum);
 
 	del_mtd_blktrans_dev(dev);
 
@@ -154,13 +152,13 @@ int inftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len,
 	struct mtd_oob_ops ops;
 	int res;
 
-	ops.mode = MTD_OOB_PLACE;
+	ops.mode = MTD_OPS_PLACE_OOB;
 	ops.ooboffs = offs & (mtd->writesize - 1);
 	ops.ooblen = len;
 	ops.oobbuf = buf;
 	ops.datbuf = NULL;
 
-	res = mtd->read_oob(mtd, offs & ~(mtd->writesize - 1), &ops);
+	res = mtd_read_oob(mtd, offs & ~(mtd->writesize - 1), &ops);
 	*retlen = ops.oobretlen;
 	return res;
 }
@@ -174,13 +172,13 @@ int inftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len,
 	struct mtd_oob_ops ops;
 	int res;
 
-	ops.mode = MTD_OOB_PLACE;
+	ops.mode = MTD_OPS_PLACE_OOB;
 	ops.ooboffs = offs & (mtd->writesize - 1);
 	ops.ooblen = len;
 	ops.oobbuf = buf;
 	ops.datbuf = NULL;
 
-	res = mtd->write_oob(mtd, offs & ~(mtd->writesize - 1), &ops);
+	res = mtd_write_oob(mtd, offs & ~(mtd->writesize - 1), &ops);
 	*retlen = ops.oobretlen;
 	return res;
 }
@@ -194,14 +192,14 @@ static int inftl_write(struct mtd_info *mtd, loff_t offs, size_t len,
 	struct mtd_oob_ops ops;
 	int res;
 
-	ops.mode = MTD_OOB_PLACE;
+	ops.mode = MTD_OPS_PLACE_OOB;
 	ops.ooboffs = offs;
 	ops.ooblen = mtd->oobsize;
 	ops.oobbuf = oob;
 	ops.datbuf = buf;
 	ops.len = len;
 
-	res = mtd->write_oob(mtd, offs & ~(mtd->writesize - 1), &ops);
+	res = mtd_write_oob(mtd, offs & ~(mtd->writesize - 1), &ops);
 	*retlen = ops.retlen;
 	return res;
 }
@@ -215,16 +213,16 @@ static u16 INFTL_findfreeblock(struct INFTLrecord *inftl, int desperate)
 	u16 pot = inftl->LastFreeEUN;
 	int silly = inftl->nb_blocks;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_findfreeblock(inftl=%p,"
-		"desperate=%d)\n", inftl, desperate);
+	pr_debug("INFTL: INFTL_findfreeblock(inftl=%p,desperate=%d)\n",
+			inftl, desperate);
 
 	/*
 	 * Normally, we force a fold to happen before we run out of free
 	 * blocks completely.
 	 */
 	if (!desperate && inftl->numfreeEUNs < 2) {
-		DEBUG(MTD_DEBUG_LEVEL1, "INFTL: there are too few free "
-			"EUNs (%d)\n", inftl->numfreeEUNs);
+		pr_debug("INFTL: there are too few free EUNs (%d)\n",
+				inftl->numfreeEUNs);
 		return BLOCK_NIL;
 	}
 
@@ -259,8 +257,8 @@ static u16 INFTL_foldchain(struct INFTLrecord *inftl, unsigned thisVUC, unsigned
 	struct inftl_oob oob;
 	size_t retlen;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_foldchain(inftl=%p,thisVUC=%d,"
-		"pending=%d)\n", inftl, thisVUC, pendingblock);
+	pr_debug("INFTL: INFTL_foldchain(inftl=%p,thisVUC=%d,pending=%d)\n",
+			inftl, thisVUC, pendingblock);
 
 	memset(BlockMap, 0xff, sizeof(BlockMap));
 	memset(BlockDeleted, 0, sizeof(BlockDeleted));
@@ -323,8 +321,7 @@ static u16 INFTL_foldchain(struct INFTLrecord *inftl, unsigned thisVUC, unsigned
 	 * Chain, and the Erase Unit into which we are supposed to be copying.
 	 * Go for it.
 	 */
-	DEBUG(MTD_DEBUG_LEVEL1, "INFTL: folding chain %d into unit %d\n",
-		thisVUC, targetEUN);
+	pr_debug("INFTL: folding chain %d into unit %d\n", thisVUC, targetEUN);
 
 	for (block = 0; block < inftl->EraseSize/SECTORSIZE ; block++) {
 		unsigned char movebuf[SECTORSIZE];
@@ -346,17 +343,19 @@ static u16 INFTL_foldchain(struct INFTLrecord *inftl, unsigned thisVUC, unsigned
 		if (BlockMap[block] == BLOCK_NIL)
 			continue;
 
-		ret = mtd->read(mtd, (inftl->EraseSize * BlockMap[block]) +
-				(block * SECTORSIZE), SECTORSIZE, &retlen,
-				movebuf);
-		if (ret < 0 && ret != -EUCLEAN) {
-			ret = mtd->read(mtd,
-					(inftl->EraseSize * BlockMap[block]) +
-					(block * SECTORSIZE), SECTORSIZE,
-					&retlen, movebuf);
+		ret = mtd_read(mtd,
+			       (inftl->EraseSize * BlockMap[block]) + (block * SECTORSIZE),
+			       SECTORSIZE,
+			       &retlen,
+			       movebuf);
+		if (ret < 0 && !mtd_is_bitflip(ret)) {
+			ret = mtd_read(mtd,
+				       (inftl->EraseSize * BlockMap[block]) + (block * SECTORSIZE),
+				       SECTORSIZE,
+				       &retlen,
+				       movebuf);
 			if (ret != -EIO)
-				DEBUG(MTD_DEBUG_LEVEL1, "INFTL: error went "
-				      "away on retry?\n");
+				pr_debug("INFTL: error went away on retry?\n");
 		}
 		memset(&oob, 0xff, sizeof(struct inftl_oob));
 		oob.b.Status = oob.b.Status1 = SECTOR_USED;
@@ -372,8 +371,7 @@ static u16 INFTL_foldchain(struct INFTLrecord *inftl, unsigned thisVUC, unsigned
 	 * is important, by doing oldest first if we crash/reboot then it
 	 * it is relatively simple to clean up the mess).
 	 */
-	DEBUG(MTD_DEBUG_LEVEL1, "INFTL: want to erase virtual chain %d\n",
-		thisVUC);
+	pr_debug("INFTL: want to erase virtual chain %d\n", thisVUC);
 
 	for (;;) {
 		/* Find oldest unit in chain. */
@@ -421,7 +419,7 @@ static u16 INFTL_makefreeblock(struct INFTLrecord *inftl, unsigned pendingblock)
 	u16 ChainLength = 0, thislen;
 	u16 chain, EUN;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_makefreeblock(inftl=%p,"
+	pr_debug("INFTL: INFTL_makefreeblock(inftl=%p,"
 		"pending=%d)\n", inftl, pendingblock);
 
 	for (chain = 0; chain < inftl->nb_blocks; chain++) {
@@ -484,8 +482,8 @@ static inline u16 INFTL_findwriteunit(struct INFTLrecord *inftl, unsigned block)
 	size_t retlen;
 	int silly, silly2 = 3;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_findwriteunit(inftl=%p,"
-		"block=%d)\n", inftl, block);
+	pr_debug("INFTL: INFTL_findwriteunit(inftl=%p,block=%d)\n",
+			inftl, block);
 
 	do {
 		/*
@@ -501,8 +499,8 @@ static inline u16 INFTL_findwriteunit(struct INFTLrecord *inftl, unsigned block)
 				       blockofs, 8, &retlen, (char *)&bci);
 
 			status = bci.Status | bci.Status1;
-			DEBUG(MTD_DEBUG_LEVEL3, "INFTL: status of block %d in "
-				"EUN %d is %x\n", block , writeEUN, status);
+			pr_debug("INFTL: status of block %d in EUN %d is %x\n",
+					block , writeEUN, status);
 
 			switch(status) {
 			case SECTOR_FREE:
@@ -555,9 +553,9 @@ hitused:
 			 * Hopefully we free something, lets try again.
 			 * This time we are desperate...
 			 */
-			DEBUG(MTD_DEBUG_LEVEL1, "INFTL: using desperate==1 "
-				"to find free EUN to accommodate write to "
-				"VUC %d\n", thisVUC);
+			pr_debug("INFTL: using desperate==1 to find free EUN "
+					"to accommodate write to VUC %d\n",
+					thisVUC);
 			writeEUN = INFTL_findfreeblock(inftl, 1);
 			if (writeEUN == BLOCK_NIL) {
 				/*
@@ -647,7 +645,7 @@ static void INFTL_trydeletechain(struct INFTLrecord *inftl, unsigned thisVUC)
 	struct inftl_bci bci;
 	size_t retlen;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_trydeletechain(inftl=%p,"
+	pr_debug("INFTL: INFTL_trydeletechain(inftl=%p,"
 		"thisVUC=%d)\n", inftl, thisVUC);
 
 	memset(BlockUsed, 0, sizeof(BlockUsed));
@@ -711,7 +709,7 @@ static void INFTL_trydeletechain(struct INFTLrecord *inftl, unsigned thisVUC)
 	 * For each block in the chain free it and make it available
 	 * for future use. Erase from the oldest unit first.
 	 */
-	DEBUG(MTD_DEBUG_LEVEL1, "INFTL: deleting empty VUC %d\n", thisVUC);
+	pr_debug("INFTL: deleting empty VUC %d\n", thisVUC);
 
 	for (;;) {
 		u16 *prevEUN = &inftl->VUtable[thisVUC];
@@ -719,7 +717,7 @@ static void INFTL_trydeletechain(struct INFTLrecord *inftl, unsigned thisVUC)
 
 		/* If the chain is all gone already, we're done */
 		if (thisEUN == BLOCK_NIL) {
-			DEBUG(MTD_DEBUG_LEVEL2, "INFTL: Empty VUC %d for deletion was already absent\n", thisEUN);
+			pr_debug("INFTL: Empty VUC %d for deletion was already absent\n", thisEUN);
 			return;
 		}
 
@@ -731,7 +729,7 @@ static void INFTL_trydeletechain(struct INFTLrecord *inftl, unsigned thisVUC)
 			thisEUN = *prevEUN;
 		}
 
-		DEBUG(MTD_DEBUG_LEVEL3, "Deleting EUN %d from VUC %d\n",
+		pr_debug("Deleting EUN %d from VUC %d\n",
 		      thisEUN, thisVUC);
 
 		if (INFTL_formatblock(inftl, thisEUN) < 0) {
@@ -767,7 +765,7 @@ static int INFTL_deleteblock(struct INFTLrecord *inftl, unsigned block)
 	size_t retlen;
 	struct inftl_bci bci;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_deleteblock(inftl=%p,"
+	pr_debug("INFTL: INFTL_deleteblock(inftl=%p,"
 		"block=%d)\n", inftl, block);
 
 	while (thisEUN < inftl->nb_blocks) {
@@ -826,7 +824,7 @@ static int inftl_writeblock(struct mtd_blktrans_dev *mbd, unsigned long block,
 	struct inftl_oob oob;
 	char *p, *pend;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: inftl_writeblock(inftl=%p,block=%ld,"
+	pr_debug("INFTL: inftl_writeblock(inftl=%p,block=%ld,"
 		"buffer=%p)\n", inftl, block, buffer);
 
 	/* Is block all zero? */
@@ -876,7 +874,7 @@ static int inftl_readblock(struct mtd_blktrans_dev *mbd, unsigned long block,
 	struct inftl_bci bci;
 	size_t retlen;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: inftl_readblock(inftl=%p,block=%ld,"
+	pr_debug("INFTL: inftl_readblock(inftl=%p,block=%ld,"
 		"buffer=%p)\n", inftl, block, buffer);
 
 	while (thisEUN < inftl->nb_blocks) {
@@ -919,10 +917,10 @@ foundit:
 	} else {
 		size_t retlen;
 		loff_t ptr = (thisEUN * inftl->EraseSize) + blockofs;
-		int ret = mtd->read(mtd, ptr, SECTORSIZE, &retlen, buffer);
+		int ret = mtd_read(mtd, ptr, SECTORSIZE, &retlen, buffer);
 
 		/* Handle corrected bit flips gracefully */
-		if (ret < 0 && ret != -EUCLEAN)
+		if (ret < 0 && !mtd_is_bitflip(ret))
 			return -EIO;
 	}
 	return 0;
diff --git a/drivers/mtd/inftlmount.c b/drivers/mtd/inftlmount.c
index 8f988d7d3c5..487e64f411a 100644
--- a/drivers/mtd/inftlmount.c
+++ b/drivers/mtd/inftlmount.c
@@ -2,11 +2,11 @@
  * inftlmount.c -- INFTL mount code with extensive checks.
  *
  * Author: Greg Ungerer (gerg@snapgear.com)
- * (C) Copyright 2002-2003, Greg Ungerer (gerg@snapgear.com)
+ * Copyright © 2002-2003, Greg Ungerer (gerg@snapgear.com)
  *
  * Based heavily on the nftlmount.c code which is:
  * Author: Fabrice Bellard (fabrice.bellard@netgem.com)
- * Copyright (C) 2000 Netgem S.A.
+ * Copyright © 2000 Netgem S.A.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -30,11 +30,9 @@
 #include <asm/uaccess.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
-#include <linux/init.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nftl.h>
 #include <linux/mtd/inftl.h>
-#include <linux/mtd/compatmac.h>
 
 /*
  * find_boot_record: Find the INFTL Media Header and its Spare copy which
@@ -54,7 +52,7 @@ static int find_boot_record(struct INFTLrecord *inftl)
 	struct INFTLPartition *ip;
 	size_t retlen;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: find_boot_record(inftl=%p)\n", inftl);
+	pr_debug("INFTL: find_boot_record(inftl=%p)\n", inftl);
 
         /*
 	 * Assume logical EraseSize == physical erasesize for starting the
@@ -74,8 +72,8 @@ static int find_boot_record(struct INFTLrecord *inftl)
 		 * Check for BNAND header first. Then whinge if it's found
 		 * but later checks fail.
 		 */
-		ret = mtd->read(mtd, block * inftl->EraseSize,
-				SECTORSIZE, &retlen, buf);
+		ret = mtd_read(mtd, block * inftl->EraseSize, SECTORSIZE,
+			       &retlen, buf);
 		/* We ignore ret in case the ECC of the MediaHeader is invalid
 		   (which is apparently acceptable) */
 		if (retlen != SECTORSIZE) {
@@ -119,8 +117,8 @@ static int find_boot_record(struct INFTLrecord *inftl)
 		memcpy(mh, buf, sizeof(struct INFTLMediaHeader));
 
 		/* Read the spare media header at offset 4096 */
-		mtd->read(mtd, block * inftl->EraseSize + 4096,
-			  SECTORSIZE, &retlen, buf);
+		mtd_read(mtd, block * inftl->EraseSize + 4096, SECTORSIZE,
+			 &retlen, buf);
 		if (retlen != SECTORSIZE) {
 			printk(KERN_WARNING "INFTL: Unable to read spare "
 			       "Media Header\n");
@@ -140,24 +138,20 @@ static int find_boot_record(struct INFTLrecord *inftl)
 		mh->FormatFlags = le32_to_cpu(mh->FormatFlags);
 		mh->PercentUsed = le32_to_cpu(mh->PercentUsed);
 
-#ifdef CONFIG_MTD_DEBUG_VERBOSE
-		if (CONFIG_MTD_DEBUG_VERBOSE >= 2) {
-			printk("INFTL: Media Header ->\n"
-				"    bootRecordID          = %s\n"
-				"    NoOfBootImageBlocks   = %d\n"
-				"    NoOfBinaryPartitions  = %d\n"
-				"    NoOfBDTLPartitions    = %d\n"
-				"    BlockMultiplerBits    = %d\n"
-				"    FormatFlgs            = %d\n"
-				"    OsakVersion           = 0x%x\n"
-				"    PercentUsed           = %d\n",
-				mh->bootRecordID, mh->NoOfBootImageBlocks,
-				mh->NoOfBinaryPartitions,
-				mh->NoOfBDTLPartitions,
-				mh->BlockMultiplierBits, mh->FormatFlags,
-				mh->OsakVersion, mh->PercentUsed);
-		}
-#endif
+		pr_debug("INFTL: Media Header ->\n"
+			 "    bootRecordID          = %s\n"
+			 "    NoOfBootImageBlocks   = %d\n"
+			 "    NoOfBinaryPartitions  = %d\n"
+			 "    NoOfBDTLPartitions    = %d\n"
+			 "    BlockMultiplerBits    = %d\n"
+			 "    FormatFlgs            = %d\n"
+			 "    OsakVersion           = 0x%x\n"
+			 "    PercentUsed           = %d\n",
+			 mh->bootRecordID, mh->NoOfBootImageBlocks,
+			 mh->NoOfBinaryPartitions,
+			 mh->NoOfBDTLPartitions,
+			 mh->BlockMultiplierBits, mh->FormatFlags,
+			 mh->OsakVersion, mh->PercentUsed);
 
 		if (mh->NoOfBDTLPartitions == 0) {
 			printk(KERN_WARNING "INFTL: Media Header sanity check "
@@ -201,19 +195,15 @@ static int find_boot_record(struct INFTLrecord *inftl)
 			ip->spareUnits = le32_to_cpu(ip->spareUnits);
 			ip->Reserved0 = le32_to_cpu(ip->Reserved0);
 
-#ifdef CONFIG_MTD_DEBUG_VERBOSE
-			if (CONFIG_MTD_DEBUG_VERBOSE >= 2) {
-				printk("    PARTITION[%d] ->\n"
-					"        virtualUnits    = %d\n"
-					"        firstUnit       = %d\n"
-					"        lastUnit        = %d\n"
-					"        flags           = 0x%x\n"
-					"        spareUnits      = %d\n",
-					i, ip->virtualUnits, ip->firstUnit,
-					ip->lastUnit, ip->flags,
-					ip->spareUnits);
-			}
-#endif
+			pr_debug("    PARTITION[%d] ->\n"
+				 "        virtualUnits    = %d\n"
+				 "        firstUnit       = %d\n"
+				 "        lastUnit        = %d\n"
+				 "        flags           = 0x%x\n"
+				 "        spareUnits      = %d\n",
+				 i, ip->virtualUnits, ip->firstUnit,
+				 ip->lastUnit, ip->flags,
+				 ip->spareUnits);
 
 			if (ip->Reserved0 != ip->firstUnit) {
 				struct erase_info *instr = &inftl->instr;
@@ -229,7 +219,7 @@ static int find_boot_record(struct INFTLrecord *inftl)
 				 */
 				instr->addr = ip->Reserved0 * inftl->EraseSize;
 				instr->len = inftl->EraseSize;
-				mtd->erase(mtd, instr);
+				mtd_erase(mtd, instr);
 			}
 			if ((ip->lastUnit - ip->firstUnit + 1) < ip->virtualUnits) {
 				printk(KERN_WARNING "INFTL: Media Header "
@@ -315,7 +305,8 @@ static int find_boot_record(struct INFTLrecord *inftl)
 			/* If any of the physical eraseblocks are bad, don't
 			   use the unit. */
 			for (physblock = 0; physblock < inftl->EraseSize; physblock += inftl->mbd.mtd->erasesize) {
-				if (inftl->mbd.mtd->block_isbad(inftl->mbd.mtd, i * inftl->EraseSize + physblock))
+				if (mtd_block_isbad(inftl->mbd.mtd,
+						    i * inftl->EraseSize + physblock))
 					inftl->PUtable[i] = BLOCK_RESERVED;
 			}
 		}
@@ -351,7 +342,7 @@ static int check_free_sectors(struct INFTLrecord *inftl, unsigned int address,
 	int i;
 
 	for (i = 0; i < len; i += SECTORSIZE) {
-		if (mtd->read(mtd, address, SECTORSIZE, &retlen, buf))
+		if (mtd_read(mtd, address, SECTORSIZE, &retlen, buf))
 			return -1;
 		if (memcmpb(buf, 0xff, SECTORSIZE) != 0)
 			return -1;
@@ -376,7 +367,7 @@ static int check_free_sectors(struct INFTLrecord *inftl, unsigned int address,
  *
  * Return: 0 when succeed, -1 on error.
  *
- * ToDo: 1. Is it neceressary to check_free_sector after erasing ??
+ * ToDo: 1. Is it necessary to check_free_sector after erasing ??
  */
 int INFTL_formatblock(struct INFTLrecord *inftl, int block)
 {
@@ -386,8 +377,7 @@ int INFTL_formatblock(struct INFTLrecord *inftl, int block)
 	struct mtd_info *mtd = inftl->mbd.mtd;
 	int physblock;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_formatblock(inftl=%p,"
-		"block=%d)\n", inftl, block);
+	pr_debug("INFTL: INFTL_formatblock(inftl=%p,block=%d)\n", inftl, block);
 
 	memset(instr, 0, sizeof(struct erase_info));
 
@@ -403,7 +393,7 @@ int INFTL_formatblock(struct INFTLrecord *inftl, int block)
 	   mark only the failed block in the bbt. */
 	for (physblock = 0; physblock < inftl->EraseSize;
 	     physblock += instr->len, instr->addr += instr->len) {
-		mtd->erase(inftl->mbd.mtd, instr);
+		mtd_erase(inftl->mbd.mtd, instr);
 
 		if (instr->state == MTD_ERASE_FAILED) {
 			printk(KERN_WARNING "INFTL: error while formatting block %d\n",
@@ -433,7 +423,7 @@ int INFTL_formatblock(struct INFTLrecord *inftl, int block)
 fail:
 	/* could not format, update the bad block table (caller is responsible
 	   for setting the PUtable to BLOCK_RESERVED on failure) */
-	inftl->mbd.mtd->block_markbad(inftl->mbd.mtd, instr->addr);
+	mtd_block_markbad(inftl->mbd.mtd, instr->addr);
 	return -1;
 }
 
@@ -477,30 +467,30 @@ void INFTL_dumptables(struct INFTLrecord *s)
 {
 	int i;
 
-	printk("-------------------------------------------"
+	pr_debug("-------------------------------------------"
 		"----------------------------------\n");
 
-	printk("VUtable[%d] ->", s->nb_blocks);
+	pr_debug("VUtable[%d] ->", s->nb_blocks);
 	for (i = 0; i < s->nb_blocks; i++) {
 		if ((i % 8) == 0)
-			printk("\n%04x: ", i);
-		printk("%04x ", s->VUtable[i]);
+			pr_debug("\n%04x: ", i);
+		pr_debug("%04x ", s->VUtable[i]);
 	}
 
-	printk("\n-------------------------------------------"
+	pr_debug("\n-------------------------------------------"
 		"----------------------------------\n");
 
-	printk("PUtable[%d-%d=%d] ->", s->firstEUN, s->lastEUN, s->nb_blocks);
+	pr_debug("PUtable[%d-%d=%d] ->", s->firstEUN, s->lastEUN, s->nb_blocks);
 	for (i = 0; i <= s->lastEUN; i++) {
 		if ((i % 8) == 0)
-			printk("\n%04x: ", i);
-		printk("%04x ", s->PUtable[i]);
+			pr_debug("\n%04x: ", i);
+		pr_debug("%04x ", s->PUtable[i]);
 	}
 
-	printk("\n-------------------------------------------"
+	pr_debug("\n-------------------------------------------"
 		"----------------------------------\n");
 
-	printk("INFTL ->\n"
+	pr_debug("INFTL ->\n"
 		"  EraseSize       = %d\n"
 		"  h/s/c           = %d/%d/%d\n"
 		"  numvunits       = %d\n"
@@ -514,7 +504,7 @@ void INFTL_dumptables(struct INFTLrecord *s)
 		s->numvunits, s->firstEUN, s->lastEUN, s->numfreeEUNs,
 		s->LastFreeEUN, s->nb_blocks, s->nb_boot_blocks);
 
-	printk("\n-------------------------------------------"
+	pr_debug("\n-------------------------------------------"
 		"----------------------------------\n");
 }
 
@@ -522,25 +512,25 @@ void INFTL_dumpVUchains(struct INFTLrecord *s)
 {
 	int logical, block, i;
 
-	printk("-------------------------------------------"
+	pr_debug("-------------------------------------------"
 		"----------------------------------\n");
 
-	printk("INFTL Virtual Unit Chains:\n");
+	pr_debug("INFTL Virtual Unit Chains:\n");
 	for (logical = 0; logical < s->nb_blocks; logical++) {
 		block = s->VUtable[logical];
 		if (block > s->nb_blocks)
 			continue;
-		printk("  LOGICAL %d --> %d ", logical, block);
+		pr_debug("  LOGICAL %d --> %d ", logical, block);
 		for (i = 0; i < s->nb_blocks; i++) {
 			if (s->PUtable[block] == BLOCK_NIL)
 				break;
 			block = s->PUtable[block];
-			printk("%d ", block);
+			pr_debug("%d ", block);
 		}
-		printk("\n");
+		pr_debug("\n");
 	}
 
-	printk("-------------------------------------------"
+	pr_debug("-------------------------------------------"
 		"----------------------------------\n");
 }
 
@@ -556,7 +546,7 @@ int INFTL_mount(struct INFTLrecord *s)
 	int i;
 	u8 *ANACtable, ANAC;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_mount(inftl=%p)\n", s);
+	pr_debug("INFTL: INFTL_mount(inftl=%p)\n", s);
 
 	/* Search for INFTL MediaHeader and Spare INFTL Media Header */
 	if (find_boot_record(s) < 0) {
@@ -586,7 +576,7 @@ int INFTL_mount(struct INFTLrecord *s)
 	 * NOTEXPLORED state. Then at the end we will try to format it and
 	 * mark it as free.
 	 */
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: pass 1, explore each unit\n");
+	pr_debug("INFTL: pass 1, explore each unit\n");
 	for (first_block = s->firstEUN; first_block <= s->lastEUN; first_block++) {
 		if (s->PUtable[first_block] != BLOCK_NOTEXPLORED)
 			continue;
@@ -718,17 +708,14 @@ int INFTL_mount(struct INFTLrecord *s)
 		logical_block = BLOCK_NIL;
 	}
 
-#ifdef CONFIG_MTD_DEBUG_VERBOSE
-	if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
-		INFTL_dumptables(s);
-#endif
+	INFTL_dumptables(s);
 
 	/*
 	 * Second pass, check for infinite loops in chains. These are
 	 * possible because we don't update the previous pointers when
 	 * we fold chains. No big deal, just fix them up in PUtable.
 	 */
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: pass 2, validate virtual chains\n");
+	pr_debug("INFTL: pass 2, validate virtual chains\n");
 	for (logical_block = 0; logical_block < s->numvunits; logical_block++) {
 		block = s->VUtable[logical_block];
 		last_block = BLOCK_NIL;
@@ -773,12 +760,8 @@ int INFTL_mount(struct INFTLrecord *s)
 		}
 	}
 
-#ifdef CONFIG_MTD_DEBUG_VERBOSE
-	if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
-		INFTL_dumptables(s);
-	if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
-		INFTL_dumpVUchains(s);
-#endif
+	INFTL_dumptables(s);
+	INFTL_dumpVUchains(s);
 
 	/*
 	 * Third pass, format unreferenced blocks and init free block count.
@@ -786,7 +769,7 @@ int INFTL_mount(struct INFTLrecord *s)
 	s->numfreeEUNs = 0;
 	s->LastFreeEUN = BLOCK_NIL;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: pass 3, format unused blocks\n");
+	pr_debug("INFTL: pass 3, format unused blocks\n");
 	for (block = s->firstEUN; block <= s->lastEUN; block++) {
 		if (s->PUtable[block] == BLOCK_NOTEXPLORED) {
 			printk("INFTL: unreferenced block %d, formatting it\n",
diff --git a/drivers/mtd/lpddr/Kconfig b/drivers/mtd/lpddr/Kconfig
index 265f969817e..3a19cbee24d 100644
--- a/drivers/mtd/lpddr/Kconfig
+++ b/drivers/mtd/lpddr/Kconfig
@@ -1,5 +1,5 @@
-menu "LPDDR flash memory drivers"
-	depends on MTD!=n
+menu "LPDDR & LPDDR2 PCM memory drivers"
+	depends on MTD
 
 config MTD_LPDDR
 	tristate "Support for LPDDR flash chips"
@@ -17,4 +17,13 @@ config MTD_QINFO_PROBE
 	    Window QINFO interface, permits software to be used for entire
 	    families of devices. This serves similar purpose of CFI on legacy
 	    Flash products
+
+config MTD_LPDDR2_NVM
+	# ARM dependency is only for writel_relaxed()
+	depends on MTD && ARM
+	tristate "Support for LPDDR2-NVM flash chips"
+	help
+	  This option enables support of PCM memories with a LPDDR2-NVM
+	  (Low power double data rate 2) interface.
+
 endmenu
diff --git a/drivers/mtd/lpddr/Makefile b/drivers/mtd/lpddr/Makefile
index da48e46b581..881d440d483 100644
--- a/drivers/mtd/lpddr/Makefile
+++ b/drivers/mtd/lpddr/Makefile
@@ -4,3 +4,4 @@
 
 obj-$(CONFIG_MTD_QINFO_PROBE)	+= qinfo_probe.o
 obj-$(CONFIG_MTD_LPDDR)	+= lpddr_cmds.o
+obj-$(CONFIG_MTD_LPDDR2_NVM) += lpddr2_nvm.o
diff --git a/drivers/mtd/lpddr/lpddr2_nvm.c b/drivers/mtd/lpddr/lpddr2_nvm.c
new file mode 100644
index 00000000000..063cec40d0a
--- /dev/null
+++ b/drivers/mtd/lpddr/lpddr2_nvm.c
@@ -0,0 +1,507 @@
+/*
+ * LPDDR2-NVM MTD driver. This module provides read, write, erase, lock/unlock
+ * support for LPDDR2-NVM PCM memories
+ *
+ * Copyright © 2012 Micron Technology, Inc.
+ *
+ * Vincenzo Aliberti <vincenzo.aliberti@gmail.com>
+ * Domenico Manna <domenico.manna@gmail.com>
+ * Many thanks to Andrea Vigilante for initial enabling
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": %s: " fmt, __func__
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/ioport.h>
+#include <linux/err.h>
+
+/* Parameters */
+#define ERASE_BLOCKSIZE			(0x00020000/2)	/* in Word */
+#define WRITE_BUFFSIZE			(0x00000400/2)	/* in Word */
+#define OW_BASE_ADDRESS			0x00000000	/* OW offset */
+#define BUS_WIDTH			0x00000020	/* x32 devices */
+
+/* PFOW symbols address offset */
+#define PFOW_QUERY_STRING_P		(0x0000/2)	/* in Word */
+#define PFOW_QUERY_STRING_F		(0x0002/2)	/* in Word */
+#define PFOW_QUERY_STRING_O		(0x0004/2)	/* in Word */
+#define PFOW_QUERY_STRING_W		(0x0006/2)	/* in Word */
+
+/* OW registers address */
+#define CMD_CODE_OFS			(0x0080/2)	/* in Word */
+#define CMD_DATA_OFS			(0x0084/2)	/* in Word */
+#define CMD_ADD_L_OFS			(0x0088/2)	/* in Word */
+#define CMD_ADD_H_OFS			(0x008A/2)	/* in Word */
+#define MPR_L_OFS			(0x0090/2)	/* in Word */
+#define MPR_H_OFS			(0x0092/2)	/* in Word */
+#define CMD_EXEC_OFS			(0x00C0/2)	/* in Word */
+#define STATUS_REG_OFS			(0x00CC/2)	/* in Word */
+#define PRG_BUFFER_OFS			(0x0010/2)	/* in Word */
+
+/* Datamask */
+#define MR_CFGMASK			0x8000
+#define SR_OK_DATAMASK			0x0080
+
+/* LPDDR2-NVM Commands */
+#define LPDDR2_NVM_LOCK			0x0061
+#define LPDDR2_NVM_UNLOCK		0x0062
+#define LPDDR2_NVM_SW_PROGRAM		0x0041
+#define LPDDR2_NVM_SW_OVERWRITE		0x0042
+#define LPDDR2_NVM_BUF_PROGRAM		0x00E9
+#define LPDDR2_NVM_BUF_OVERWRITE	0x00EA
+#define LPDDR2_NVM_ERASE		0x0020
+
+/* LPDDR2-NVM Registers offset */
+#define LPDDR2_MODE_REG_DATA		0x0040
+#define LPDDR2_MODE_REG_CFG		0x0050
+
+/*
+ * Internal Type Definitions
+ * pcm_int_data contains memory controller details:
+ * @reg_data : LPDDR2_MODE_REG_DATA register address after remapping
+ * @reg_cfg  : LPDDR2_MODE_REG_CFG register address after remapping
+ * &bus_width: memory bus-width (eg: x16 2 Bytes, x32 4 Bytes)
+ */
+struct pcm_int_data {
+	void __iomem *ctl_regs;
+	int bus_width;
+};
+
+static DEFINE_MUTEX(lpdd2_nvm_mutex);
+
+/*
+ * Build a map_word starting from an u_long
+ */
+static inline map_word build_map_word(u_long myword)
+{
+	map_word val = { {0} };
+	val.x[0] = myword;
+	return val;
+}
+
+/*
+ * Build Mode Register Configuration DataMask based on device bus-width
+ */
+static inline u_int build_mr_cfgmask(u_int bus_width)
+{
+	u_int val = MR_CFGMASK;
+
+	if (bus_width == 0x0004)		/* x32 device */
+		val = val << 16;
+
+	return val;
+}
+
+/*
+ * Build Status Register OK DataMask based on device bus-width
+ */
+static inline u_int build_sr_ok_datamask(u_int bus_width)
+{
+	u_int val = SR_OK_DATAMASK;
+
+	if (bus_width == 0x0004)		/* x32 device */
+		val = (val << 16)+val;
+
+	return val;
+}
+
+/*
+ * Evaluates Overlay Window Control Registers address
+ */
+static inline u_long ow_reg_add(struct map_info *map, u_long offset)
+{
+	u_long val = 0;
+	struct pcm_int_data *pcm_data = map->fldrv_priv;
+
+	val = map->pfow_base + offset*pcm_data->bus_width;
+
+	return val;
+}
+
+/*
+ * Enable lpddr2-nvm Overlay Window
+ * Overlay Window is a memory mapped area containing all LPDDR2-NVM registers
+ * used by device commands as well as uservisible resources like Device Status
+ * Register, Device ID, etc
+ */
+static inline void ow_enable(struct map_info *map)
+{
+	struct pcm_int_data *pcm_data = map->fldrv_priv;
+
+	writel_relaxed(build_mr_cfgmask(pcm_data->bus_width) | 0x18,
+		pcm_data->ctl_regs + LPDDR2_MODE_REG_CFG);
+	writel_relaxed(0x01, pcm_data->ctl_regs + LPDDR2_MODE_REG_DATA);
+}
+
+/*
+ * Disable lpddr2-nvm Overlay Window
+ * Overlay Window is a memory mapped area containing all LPDDR2-NVM registers
+ * used by device commands as well as uservisible resources like Device Status
+ * Register, Device ID, etc
+ */
+static inline void ow_disable(struct map_info *map)
+{
+	struct pcm_int_data *pcm_data = map->fldrv_priv;
+
+	writel_relaxed(build_mr_cfgmask(pcm_data->bus_width) | 0x18,
+		pcm_data->ctl_regs + LPDDR2_MODE_REG_CFG);
+	writel_relaxed(0x02, pcm_data->ctl_regs + LPDDR2_MODE_REG_DATA);
+}
+
+/*
+ * Execute lpddr2-nvm operations
+ */
+static int lpddr2_nvm_do_op(struct map_info *map, u_long cmd_code,
+	u_long cmd_data, u_long cmd_add, u_long cmd_mpr, u_char *buf)
+{
+	map_word add_l = { {0} }, add_h = { {0} }, mpr_l = { {0} },
+		mpr_h = { {0} }, data_l = { {0} }, cmd = { {0} },
+		exec_cmd = { {0} }, sr;
+	map_word data_h = { {0} };	/* only for 2x x16 devices stacked */
+	u_long i, status_reg, prg_buff_ofs;
+	struct pcm_int_data *pcm_data = map->fldrv_priv;
+	u_int sr_ok_datamask = build_sr_ok_datamask(pcm_data->bus_width);
+
+	/* Builds low and high words for OW Control Registers */
+	add_l.x[0]	= cmd_add & 0x0000FFFF;
+	add_h.x[0]	= (cmd_add >> 16) & 0x0000FFFF;
+	mpr_l.x[0]	= cmd_mpr & 0x0000FFFF;
+	mpr_h.x[0]	= (cmd_mpr >> 16) & 0x0000FFFF;
+	cmd.x[0]	= cmd_code & 0x0000FFFF;
+	exec_cmd.x[0]	= 0x0001;
+	data_l.x[0]	= cmd_data & 0x0000FFFF;
+	data_h.x[0]	= (cmd_data >> 16) & 0x0000FFFF; /* only for 2x x16 */
+
+	/* Set Overlay Window Control Registers */
+	map_write(map, cmd, ow_reg_add(map, CMD_CODE_OFS));
+	map_write(map, data_l, ow_reg_add(map, CMD_DATA_OFS));
+	map_write(map, add_l, ow_reg_add(map, CMD_ADD_L_OFS));
+	map_write(map, add_h, ow_reg_add(map, CMD_ADD_H_OFS));
+	map_write(map, mpr_l, ow_reg_add(map, MPR_L_OFS));
+	map_write(map, mpr_h, ow_reg_add(map, MPR_H_OFS));
+	if (pcm_data->bus_width == 0x0004) {	/* 2x16 devices stacked */
+		map_write(map, cmd, ow_reg_add(map, CMD_CODE_OFS) + 2);
+		map_write(map, data_h, ow_reg_add(map, CMD_DATA_OFS) + 2);
+		map_write(map, add_l, ow_reg_add(map, CMD_ADD_L_OFS) + 2);
+		map_write(map, add_h, ow_reg_add(map, CMD_ADD_H_OFS) + 2);
+		map_write(map, mpr_l, ow_reg_add(map, MPR_L_OFS) + 2);
+		map_write(map, mpr_h, ow_reg_add(map, MPR_H_OFS) + 2);
+	}
+
+	/* Fill Program Buffer */
+	if ((cmd_code == LPDDR2_NVM_BUF_PROGRAM) ||
+		(cmd_code == LPDDR2_NVM_BUF_OVERWRITE)) {
+		prg_buff_ofs = (map_read(map,
+			ow_reg_add(map, PRG_BUFFER_OFS))).x[0];
+		for (i = 0; i < cmd_mpr; i++) {
+			map_write(map, build_map_word(buf[i]), map->pfow_base +
+			prg_buff_ofs + i);
+		}
+	}
+
+	/* Command Execute */
+	map_write(map, exec_cmd, ow_reg_add(map, CMD_EXEC_OFS));
+	if (pcm_data->bus_width == 0x0004)	/* 2x16 devices stacked */
+		map_write(map, exec_cmd, ow_reg_add(map, CMD_EXEC_OFS) + 2);
+
+	/* Status Register Check */
+	do {
+		sr = map_read(map, ow_reg_add(map, STATUS_REG_OFS));
+		status_reg = sr.x[0];
+		if (pcm_data->bus_width == 0x0004) {/* 2x16 devices stacked */
+			sr = map_read(map, ow_reg_add(map,
+				STATUS_REG_OFS) + 2);
+			status_reg += sr.x[0] << 16;
+		}
+	} while ((status_reg & sr_ok_datamask) != sr_ok_datamask);
+
+	return (((status_reg & sr_ok_datamask) == sr_ok_datamask) ? 0 : -EIO);
+}
+
+/*
+ * Execute lpddr2-nvm operations @ block level
+ */
+static int lpddr2_nvm_do_block_op(struct mtd_info *mtd, loff_t start_add,
+	uint64_t len, u_char block_op)
+{
+	struct map_info *map = mtd->priv;
+	u_long add, end_add;
+	int ret = 0;
+
+	mutex_lock(&lpdd2_nvm_mutex);
+
+	ow_enable(map);
+
+	add = start_add;
+	end_add = add + len;
+
+	do {
+		ret = lpddr2_nvm_do_op(map, block_op, 0x00, add, add, NULL);
+		if (ret)
+			goto out;
+		add += mtd->erasesize;
+	} while (add < end_add);
+
+out:
+	ow_disable(map);
+	mutex_unlock(&lpdd2_nvm_mutex);
+	return ret;
+}
+
+/*
+ * verify presence of PFOW string
+ */
+static int lpddr2_nvm_pfow_present(struct map_info *map)
+{
+	map_word pfow_val[4];
+	unsigned int found = 1;
+
+	mutex_lock(&lpdd2_nvm_mutex);
+
+	ow_enable(map);
+
+	/* Load string from array */
+	pfow_val[0] = map_read(map, ow_reg_add(map, PFOW_QUERY_STRING_P));
+	pfow_val[1] = map_read(map, ow_reg_add(map, PFOW_QUERY_STRING_F));
+	pfow_val[2] = map_read(map, ow_reg_add(map, PFOW_QUERY_STRING_O));
+	pfow_val[3] = map_read(map, ow_reg_add(map, PFOW_QUERY_STRING_W));
+
+	/* Verify the string loaded vs expected */
+	if (!map_word_equal(map, build_map_word('P'), pfow_val[0]))
+		found = 0;
+	if (!map_word_equal(map, build_map_word('F'), pfow_val[1]))
+		found = 0;
+	if (!map_word_equal(map, build_map_word('O'), pfow_val[2]))
+		found = 0;
+	if (!map_word_equal(map, build_map_word('W'), pfow_val[3]))
+		found = 0;
+
+	ow_disable(map);
+
+	mutex_unlock(&lpdd2_nvm_mutex);
+
+	return found;
+}
+
+/*
+ * lpddr2_nvm driver read method
+ */
+static int lpddr2_nvm_read(struct mtd_info *mtd, loff_t start_add,
+				size_t len, size_t *retlen, u_char *buf)
+{
+	struct map_info *map = mtd->priv;
+
+	mutex_lock(&lpdd2_nvm_mutex);
+
+	*retlen = len;
+
+	map_copy_from(map, buf, start_add, *retlen);
+
+	mutex_unlock(&lpdd2_nvm_mutex);
+	return 0;
+}
+
+/*
+ * lpddr2_nvm driver write method
+ */
+static int lpddr2_nvm_write(struct mtd_info *mtd, loff_t start_add,
+				size_t len, size_t *retlen, const u_char *buf)
+{
+	struct map_info *map = mtd->priv;
+	struct pcm_int_data *pcm_data = map->fldrv_priv;
+	u_long add, current_len, tot_len, target_len, my_data;
+	u_char *write_buf = (u_char *)buf;
+	int ret = 0;
+
+	mutex_lock(&lpdd2_nvm_mutex);
+
+	ow_enable(map);
+
+	/* Set start value for the variables */
+	add = start_add;
+	target_len = len;
+	tot_len = 0;
+
+	while (tot_len < target_len) {
+		if (!(IS_ALIGNED(add, mtd->writesize))) { /* do sw program */
+			my_data = write_buf[tot_len];
+			my_data += (write_buf[tot_len+1]) << 8;
+			if (pcm_data->bus_width == 0x0004) {/* 2x16 devices */
+				my_data += (write_buf[tot_len+2]) << 16;
+				my_data += (write_buf[tot_len+3]) << 24;
+			}
+			ret = lpddr2_nvm_do_op(map, LPDDR2_NVM_SW_OVERWRITE,
+				my_data, add, 0x00, NULL);
+			if (ret)
+				goto out;
+
+			add += pcm_data->bus_width;
+			tot_len += pcm_data->bus_width;
+		} else {		/* do buffer program */
+			current_len = min(target_len - tot_len,
+				(u_long) mtd->writesize);
+			ret = lpddr2_nvm_do_op(map, LPDDR2_NVM_BUF_OVERWRITE,
+				0x00, add, current_len, write_buf + tot_len);
+			if (ret)
+				goto out;
+
+			add += current_len;
+			tot_len += current_len;
+		}
+	}
+
+out:
+	*retlen = tot_len;
+	ow_disable(map);
+	mutex_unlock(&lpdd2_nvm_mutex);
+	return ret;
+}
+
+/*
+ * lpddr2_nvm driver erase method
+ */
+static int lpddr2_nvm_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+	int ret = lpddr2_nvm_do_block_op(mtd, instr->addr, instr->len,
+		LPDDR2_NVM_ERASE);
+	if (!ret) {
+		instr->state = MTD_ERASE_DONE;
+		mtd_erase_callback(instr);
+	}
+
+	return ret;
+}
+
+/*
+ * lpddr2_nvm driver unlock method
+ */
+static int lpddr2_nvm_unlock(struct mtd_info *mtd, loff_t start_add,
+	uint64_t len)
+{
+	return lpddr2_nvm_do_block_op(mtd, start_add, len, LPDDR2_NVM_UNLOCK);
+}
+
+/*
+ * lpddr2_nvm driver lock method
+ */
+static int lpddr2_nvm_lock(struct mtd_info *mtd, loff_t start_add,
+	uint64_t len)
+{
+	return lpddr2_nvm_do_block_op(mtd, start_add, len, LPDDR2_NVM_LOCK);
+}
+
+/*
+ * lpddr2_nvm driver probe method
+ */
+static int lpddr2_nvm_probe(struct platform_device *pdev)
+{
+	struct map_info *map;
+	struct mtd_info *mtd;
+	struct resource *add_range;
+	struct resource *control_regs;
+	struct pcm_int_data *pcm_data;
+
+	/* Allocate memory control_regs data structures */
+	pcm_data = devm_kzalloc(&pdev->dev, sizeof(*pcm_data), GFP_KERNEL);
+	if (!pcm_data)
+		return -ENOMEM;
+
+	pcm_data->bus_width = BUS_WIDTH;
+
+	/* Allocate memory for map_info & mtd_info data structures */
+	map = devm_kzalloc(&pdev->dev, sizeof(*map), GFP_KERNEL);
+	if (!map)
+		return -ENOMEM;
+
+	mtd = devm_kzalloc(&pdev->dev, sizeof(*mtd), GFP_KERNEL);
+	if (!mtd)
+		return -ENOMEM;
+
+	/* lpddr2_nvm address range */
+	add_range = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	/* Populate map_info data structure */
+	*map = (struct map_info) {
+		.virt		= devm_ioremap_resource(&pdev->dev, add_range),
+		.name		= pdev->dev.init_name,
+		.phys		= add_range->start,
+		.size		= resource_size(add_range),
+		.bankwidth	= pcm_data->bus_width / 2,
+		.pfow_base	= OW_BASE_ADDRESS,
+		.fldrv_priv	= pcm_data,
+	};
+	if (IS_ERR(map->virt))
+		return PTR_ERR(map->virt);
+
+	simple_map_init(map);	/* fill with default methods */
+
+	control_regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	pcm_data->ctl_regs = devm_ioremap_resource(&pdev->dev, control_regs);
+	if (IS_ERR(pcm_data->ctl_regs))
+		return PTR_ERR(pcm_data->ctl_regs);
+
+	/* Populate mtd_info data structure */
+	*mtd = (struct mtd_info) {
+		.name		= pdev->dev.init_name,
+		.type		= MTD_RAM,
+		.priv		= map,
+		.size		= resource_size(add_range),
+		.erasesize	= ERASE_BLOCKSIZE * pcm_data->bus_width,
+		.writesize	= 1,
+		.writebufsize	= WRITE_BUFFSIZE * pcm_data->bus_width,
+		.flags		= (MTD_CAP_NVRAM | MTD_POWERUP_LOCK),
+		._read		= lpddr2_nvm_read,
+		._write		= lpddr2_nvm_write,
+		._erase		= lpddr2_nvm_erase,
+		._unlock	= lpddr2_nvm_unlock,
+		._lock		= lpddr2_nvm_lock,
+	};
+
+	/* Verify the presence of the device looking for PFOW string */
+	if (!lpddr2_nvm_pfow_present(map)) {
+		pr_err("device not recognized\n");
+		return -EINVAL;
+	}
+	/* Parse partitions and register the MTD device */
+	return mtd_device_parse_register(mtd, NULL, NULL, NULL, 0);
+}
+
+/*
+ * lpddr2_nvm driver remove method
+ */
+static int lpddr2_nvm_remove(struct platform_device *pdev)
+{
+	return mtd_device_unregister(dev_get_drvdata(&pdev->dev));
+}
+
+/* Initialize platform_driver data structure for lpddr2_nvm */
+static struct platform_driver lpddr2_nvm_drv = {
+	.driver		= {
+		.name	= "lpddr2_nvm",
+	},
+	.probe		= lpddr2_nvm_probe,
+	.remove		= lpddr2_nvm_remove,
+};
+
+module_platform_driver(lpddr2_nvm_drv);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Vincenzo Aliberti <vincenzo.aliberti@gmail.com>");
+MODULE_DESCRIPTION("MTD driver for LPDDR2-NVM PCM memories");
diff --git a/drivers/mtd/lpddr/lpddr_cmds.c b/drivers/mtd/lpddr/lpddr_cmds.c
index fece5be5871..018c75faadb 100644
--- a/drivers/mtd/lpddr/lpddr_cmds.c
+++ b/drivers/mtd/lpddr/lpddr_cmds.c
@@ -3,7 +3,7 @@
  * erase, lock/unlock support for LPDDR flash memories
  * (C) 2008 Korolev Alexey <akorolev@infradead.org>
  * (C) 2008 Vasiliy Leonenko <vasiliy.leonenko@gmail.com>
- * Many thanks to Roman Borisov for intial enabling
+ * Many thanks to Roman Borisov for initial enabling
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -27,6 +27,7 @@
 #include <linux/mtd/pfow.h>
 #include <linux/mtd/qinfo.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 static int lpddr_read(struct mtd_info *mtd, loff_t adr, size_t len,
 					size_t *retlen, u_char *buf);
@@ -39,7 +40,7 @@ static int lpddr_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
 static int lpddr_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
 static int lpddr_point(struct mtd_info *mtd, loff_t adr, size_t len,
 			size_t *retlen, void **mtdbuf, resource_size_t *phys);
-static void lpddr_unpoint(struct mtd_info *mtd, loff_t adr, size_t len);
+static int lpddr_unpoint(struct mtd_info *mtd, loff_t adr, size_t len);
 static int get_chip(struct map_info *map, struct flchip *chip, int mode);
 static int chip_ready(struct map_info *map, struct flchip *chip, int mode);
 static void put_chip(struct map_info *map, struct flchip *chip);
@@ -54,34 +55,25 @@ struct mtd_info *lpddr_cmdset(struct map_info *map)
 	int i, j;
 
 	mtd = kzalloc(sizeof(*mtd), GFP_KERNEL);
-	if (!mtd) {
-		printk(KERN_ERR "Failed to allocate memory for MTD device\n");
+	if (!mtd)
 		return NULL;
-	}
 	mtd->priv = map;
 	mtd->type = MTD_NORFLASH;
 
 	/* Fill in the default mtd operations */
-	mtd->read = lpddr_read;
+	mtd->_read = lpddr_read;
 	mtd->type = MTD_NORFLASH;
 	mtd->flags = MTD_CAP_NORFLASH;
 	mtd->flags &= ~MTD_BIT_WRITEABLE;
-	mtd->erase = lpddr_erase;
-	mtd->write = lpddr_write_buffers;
-	mtd->writev = lpddr_writev;
-	mtd->read_oob = NULL;
-	mtd->write_oob = NULL;
-	mtd->sync = NULL;
-	mtd->lock = lpddr_lock;
-	mtd->unlock = lpddr_unlock;
-	mtd->suspend = NULL;
-	mtd->resume = NULL;
+	mtd->_erase = lpddr_erase;
+	mtd->_write = lpddr_write_buffers;
+	mtd->_writev = lpddr_writev;
+	mtd->_lock = lpddr_lock;
+	mtd->_unlock = lpddr_unlock;
 	if (map_is_linear(map)) {
-		mtd->point = lpddr_point;
-		mtd->unpoint = lpddr_unpoint;
+		mtd->_point = lpddr_point;
+		mtd->_unpoint = lpddr_unpoint;
 	}
-	mtd->block_isbad = NULL;
-	mtd->block_markbad = NULL;
 	mtd->size = 1 << lpddr->qinfo->DevSizeShift;
 	mtd->erasesize = 1 << lpddr->qinfo->UniformBlockSizeShift;
 	mtd->writesize = 1 << lpddr->qinfo->BufSizeShift;
@@ -98,7 +90,7 @@ struct mtd_info *lpddr_cmdset(struct map_info *map)
 	numchips = lpddr->numchips / lpddr->qinfo->HWPartsNum;
 	for (i = 0; i < numchips; i++) {
 		shared[i].writing = shared[i].erasing = NULL;
-		spin_lock_init(&shared[i].lock);
+		mutex_init(&shared[i].lock);
 		for (j = 0; j < lpddr->qinfo->HWPartsNum; j++) {
 			*chip = lpddr->chips[i];
 			chip->start += j << lpddr->chipshift;
@@ -171,7 +163,7 @@ static int wait_for_ready(struct map_info *map, struct flchip *chip,
 			mutex_lock(&chip->mutex);
 		}
 		if (chip->erase_suspended || chip->write_suspended)  {
-			/* Suspend has occured while sleep: reset timeout */
+			/* Suspend has occurred while sleep: reset timeout */
 			timeo = reset_timeo;
 			chip->erase_suspended = chip->write_suspended = 0;
 		}
@@ -217,7 +209,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, int mode)
 		 */
 		struct flchip_shared *shared = chip->priv;
 		struct flchip *contender;
-		spin_lock(&shared->lock);
+		mutex_lock(&shared->lock);
 		contender = shared->writing;
 		if (contender && contender != chip) {
 			/*
@@ -230,7 +222,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, int mode)
 			 * get_chip returns success we're clear to go ahead.
 			 */
 			ret = mutex_trylock(&contender->mutex);
-			spin_unlock(&shared->lock);
+			mutex_unlock(&shared->lock);
 			if (!ret)
 				goto retry;
 			mutex_unlock(&chip->mutex);
@@ -245,7 +237,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, int mode)
 				mutex_unlock(&contender->mutex);
 				return ret;
 			}
-			spin_lock(&shared->lock);
+			mutex_lock(&shared->lock);
 
 			/* We should not own chip if it is already in FL_SYNCING
 			 * state. Put contender and retry. */
@@ -261,7 +253,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, int mode)
 		   Must sleep in such a case. */
 		if (mode == FL_ERASING && shared->erasing
 		    && shared->erasing->oldstate == FL_ERASING) {
-			spin_unlock(&shared->lock);
+			mutex_unlock(&shared->lock);
 			set_current_state(TASK_UNINTERRUPTIBLE);
 			add_wait_queue(&chip->wq, &wait);
 			mutex_unlock(&chip->mutex);
@@ -275,7 +267,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, int mode)
 		shared->writing = chip;
 		if (mode == FL_ERASING)
 			shared->erasing = chip;
-		spin_unlock(&shared->lock);
+		mutex_unlock(&shared->lock);
 	}
 
 	ret = chip_ready(map, chip, mode);
@@ -313,12 +305,7 @@ static int chip_ready(struct map_info *map, struct flchip *chip, int mode)
 		if (ret) {
 			/* Oops. something got wrong. */
 			/* Resume and pretend we weren't here.  */
-			map_write(map, CMD(LPDDR_RESUME),
-				map->pfow_base + PFOW_COMMAND_CODE);
-			map_write(map, CMD(LPDDR_START_EXECUTION),
-				map->pfow_base + PFOW_COMMAND_EXECUTE);
-			chip->state = FL_ERASING;
-			chip->oldstate = FL_READY;
+			put_chip(map, chip);
 			printk(KERN_ERR "%s: suspend operation failed."
 					"State may be wrong \n", map->name);
 			return -EIO;
@@ -348,7 +335,7 @@ static void put_chip(struct map_info *map, struct flchip *chip)
 {
 	if (chip->priv) {
 		struct flchip_shared *shared = chip->priv;
-		spin_lock(&shared->lock);
+		mutex_lock(&shared->lock);
 		if (shared->writing == chip && chip->oldstate == FL_READY) {
 			/* We own the ability to write, but we're done */
 			shared->writing = shared->erasing;
@@ -356,7 +343,7 @@ static void put_chip(struct map_info *map, struct flchip *chip)
 				/* give back the ownership */
 				struct flchip *loaner = shared->writing;
 				mutex_lock(&loaner->mutex);
-				spin_unlock(&shared->lock);
+				mutex_unlock(&shared->lock);
 				mutex_unlock(&chip->mutex);
 				put_chip(map, loaner);
 				mutex_lock(&chip->mutex);
@@ -374,16 +361,15 @@ static void put_chip(struct map_info *map, struct flchip *chip)
 			 * Don't let the switch below mess things up since
 			 * we don't have ownership to resume anything.
 			 */
-			spin_unlock(&shared->lock);
+			mutex_unlock(&shared->lock);
 			wake_up(&chip->wq);
 			return;
 		}
-		spin_unlock(&shared->lock);
+		mutex_unlock(&shared->lock);
 	}
 
 	switch (chip->oldstate) {
 	case FL_ERASING:
-		chip->state = chip->oldstate;
 		map_write(map, CMD(LPDDR_RESUME),
 				map->pfow_base + PFOW_COMMAND_CODE);
 		map_write(map, CMD(LPDDR_START_EXECUTION),
@@ -400,7 +386,7 @@ static void put_chip(struct map_info *map, struct flchip *chip)
 	wake_up(&chip->wq);
 }
 
-int do_write_buffer(struct map_info *map, struct flchip *chip,
+static int do_write_buffer(struct map_info *map, struct flchip *chip,
 			unsigned long adr, const struct kvec **pvec,
 			unsigned long *pvec_seek, int len)
 {
@@ -481,7 +467,7 @@ int do_write_buffer(struct map_info *map, struct flchip *chip,
 	return ret;
 }
 
-int do_erase_oneblock(struct mtd_info *mtd, loff_t adr)
+static int do_erase_oneblock(struct mtd_info *mtd, loff_t adr)
 {
 	struct map_info *map = mtd->priv;
 	struct lpddr_private *lpddr = map->fldrv_priv;
@@ -542,14 +528,12 @@ static int lpddr_point(struct mtd_info *mtd, loff_t adr, size_t len,
 	struct flchip *chip = &lpddr->chips[chipnum];
 	int ret = 0;
 
-	if (!map->virt || (adr + len > mtd->size))
+	if (!map->virt)
 		return -EINVAL;
 
 	/* ofs: offset within the first chip that the first read should start */
 	ofs = adr - (chipnum << lpddr->chipshift);
-
 	*mtdbuf = (void *)map->virt + chip->start + ofs;
-	*retlen = 0;
 
 	while (len) {
 		unsigned long thislen;
@@ -587,11 +571,11 @@ static int lpddr_point(struct mtd_info *mtd, loff_t adr, size_t len,
 	return 0;
 }
 
-static void lpddr_unpoint (struct mtd_info *mtd, loff_t adr, size_t len)
+static int lpddr_unpoint (struct mtd_info *mtd, loff_t adr, size_t len)
 {
 	struct map_info *map = mtd->priv;
 	struct lpddr_private *lpddr = map->fldrv_priv;
-	int chipnum = adr >> lpddr->chipshift;
+	int chipnum = adr >> lpddr->chipshift, err = 0;
 	unsigned long ofs;
 
 	/* ofs: offset within the first chip that the first read should start */
@@ -615,9 +599,11 @@ static void lpddr_unpoint (struct mtd_info *mtd, loff_t adr, size_t len)
 			chip->ref_point_counter--;
 			if (chip->ref_point_counter == 0)
 				chip->state = FL_READY;
-		} else
+		} else {
 			printk(KERN_WARNING "%s: Warning: unpoint called on non"
 					"pointed region\n", map->name);
+			err = -EINVAL;
+		}
 
 		put_chip(map, chip);
 		mutex_unlock(&chip->mutex);
@@ -626,6 +612,8 @@ static void lpddr_unpoint (struct mtd_info *mtd, loff_t adr, size_t len)
 		ofs = 0;
 		chipnum++;
 	}
+
+	return err;
 }
 
 static int lpddr_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
@@ -649,13 +637,11 @@ static int lpddr_writev(struct mtd_info *mtd, const struct kvec *vecs,
 	int chipnum;
 	unsigned long ofs, vec_seek, i;
 	int wbufsize = 1 << lpddr->qinfo->BufSizeShift;
-
 	size_t len = 0;
 
 	for (i = 0; i < count; i++)
 		len += vecs[i].iov_len;
 
-	*retlen = 0;
 	if (!len)
 		return 0;
 
@@ -700,9 +686,6 @@ static int lpddr_erase(struct mtd_info *mtd, struct erase_info *instr)
 	ofs = instr->addr;
 	len = instr->len;
 
-	if (ofs > mtd->size || (len + ofs) > mtd->size)
-		return -EINVAL;
-
 	while (len > 0) {
 		ret = do_erase_oneblock(mtd, ofs);
 		if (ret)
@@ -718,7 +701,7 @@ static int lpddr_erase(struct mtd_info *mtd, struct erase_info *instr)
 
 #define DO_XXLOCK_LOCK		1
 #define DO_XXLOCK_UNLOCK	2
-int do_xxlock(struct mtd_info *mtd, loff_t adr, uint32_t len, int thunk)
+static int do_xxlock(struct mtd_info *mtd, loff_t adr, uint32_t len, int thunk)
 {
 	int ret = 0;
 	struct map_info *map = mtd->priv;
@@ -763,34 +746,6 @@ static int lpddr_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 	return do_xxlock(mtd, ofs, len, DO_XXLOCK_UNLOCK);
 }
 
-int word_program(struct map_info *map, loff_t adr, uint32_t curval)
-{
-    int ret;
-	struct lpddr_private *lpddr = map->fldrv_priv;
-	int chipnum = adr >> lpddr->chipshift;
-	struct flchip *chip = &lpddr->chips[chipnum];
-
-	mutex_lock(&chip->mutex);
-	ret = get_chip(map, chip, FL_WRITING);
-	if (ret) {
-		mutex_unlock(&chip->mutex);
-		return ret;
-	}
-
-	send_pfow_command(map, LPDDR_WORD_PROGRAM, adr, 0x00, (map_word *)&curval);
-
-	ret = wait_for_ready(map, chip, (1<<lpddr->qinfo->SingleWordProgTime));
-	if (ret)	{
-		printk(KERN_WARNING"%s word_program error at: %llx; val: %x\n",
-			map->name, adr, curval);
-		goto out;
-	}
-
-out:	put_chip(map, chip);
-	mutex_unlock(&chip->mutex);
-	return ret;
-}
-
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Alexey Korolev <akorolev@infradead.org>");
 MODULE_DESCRIPTION("MTD driver for LPDDR flash chips");
diff --git a/drivers/mtd/lpddr/qinfo_probe.c b/drivers/mtd/lpddr/qinfo_probe.c
index dbfe17baf04..69f2112340b 100644
--- a/drivers/mtd/lpddr/qinfo_probe.c
+++ b/drivers/mtd/lpddr/qinfo_probe.c
@@ -57,7 +57,7 @@ static struct qinfo_query_info qinfo_array[] = {
 
 static long lpddr_get_qinforec_pos(struct map_info *map, char *id_str)
 {
-	int qinfo_lines = sizeof(qinfo_array)/sizeof(struct qinfo_query_info);
+	int qinfo_lines = ARRAY_SIZE(qinfo_array);
 	int i;
 	int bankwidth = map_bankwidth(map) * 8;
 	int major, minor;
@@ -135,11 +135,8 @@ static int lpddr_chip_setup(struct map_info *map, struct lpddr_private *lpddr)
 {
 
 	lpddr->qinfo = kzalloc(sizeof(struct qinfo_chip), GFP_KERNEL);
-	if (!lpddr->qinfo) {
-		printk(KERN_WARNING "%s: no memory for LPDDR qinfo structure\n",
-				map->name);
+	if (!lpddr->qinfo)
 		return 0;
-	}
 
 	/* Get the ManuID */
 	lpddr->ManufactId = CMDVAL(map_read(map, map->pfow_base + PFOW_MANUFACTURER_ID));
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index f22bc9f05dd..21b2874a303 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -1,5 +1,6 @@
 menu "Mapping drivers for chip access"
 	depends on MTD!=n
+	depends on HAS_IOMEM
 
 config MTD_COMPLEX_MAPPINGS
 	bool "Support non-linear mappings of flash chips"
@@ -41,8 +42,6 @@ config MTD_PHYSMAP_START
 	  are mapped on your particular target board. Refer to the
 	  memory map which should hopefully be in the documentation for
 	  your board.
-	  Ignore this option if you use run-time physmap configuration
-	  (i.e., run-time calling physmap_configure()).
 
 config MTD_PHYSMAP_LEN
 	hex "Physical length of flash mapping"
@@ -55,8 +54,6 @@ config MTD_PHYSMAP_LEN
 	  than the total amount of flash present. Refer to the memory
 	  map which should hopefully be in the documentation for your
 	  board.
-	  Ignore this option if you use run-time physmap configuration
-	  (i.e., run-time calling physmap_configure()).
 
 config MTD_PHYSMAP_BANKWIDTH
 	int "Bank width in octets"
@@ -67,22 +64,19 @@ config MTD_PHYSMAP_BANKWIDTH
 	  in octets. For example, if you have a data bus width of 32
 	  bits, you would set the bus width octet value to 4. This is
 	  used internally by the CFI drivers.
-	  Ignore this option if you use run-time physmap configuration
-	  (i.e., run-time calling physmap_configure()).
 
 config MTD_PHYSMAP_OF
-	tristate "Flash device in physical memory map based on OF description"
-	depends on (MICROBLAZE || PPC_OF) && (MTD_CFI || MTD_JEDECPROBE || MTD_ROM)
+	tristate "Memory device in physical memory map based on OF description"
+	depends on OF && (MTD_CFI || MTD_JEDECPROBE || MTD_ROM || MTD_RAM)
 	help
-	  This provides a 'mapping' driver which allows the NOR Flash and
-	  ROM driver code to communicate with chips which are mapped
+	  This provides a 'mapping' driver which allows the NOR Flash, ROM
+	  and RAM driver code to communicate with chips which are mapped
 	  physically into the CPU's memory. The mapping description here is
 	  taken from OF device tree.
 
 config MTD_PMC_MSP_EVM
 	tristate "CFI Flash device mapped on PMC-Sierra MSP"
 	depends on PMC_MSP && MTD_CFI
-	select MTD_PARTITIONS
 	help
 	  This provides a 'mapping' driver which supports the way
 	  in which user-programmable flash chips are connected on the
@@ -114,7 +108,7 @@ config MTD_SUN_UFLASH
 
 config MTD_SC520CDP
 	tristate "CFI Flash device mapped on AMD SC520 CDP"
-	depends on X86 && MTD_CFI && MTD_CONCAT
+	depends on (MELAN || COMPILE_TEST) && MTD_CFI
 	help
 	  The SC520 CDP board has two banks of CFI-compliant chips and one
 	  Dual-in-line JEDEC chip. This 'mapping' driver supports that
@@ -122,7 +116,7 @@ config MTD_SC520CDP
 
 config MTD_NETSC520
 	tristate "CFI Flash device mapped on AMD NetSc520"
-	depends on X86 && MTD_CFI && MTD_PARTITIONS
+	depends on (MELAN || COMPILE_TEST) && MTD_CFI
 	help
 	  This enables access routines for the flash chips on the AMD NetSc520
 	  demonstration board. If you have one of these boards and would like
@@ -130,8 +124,7 @@ config MTD_NETSC520
 
 config MTD_TS5500
 	tristate "JEDEC Flash device mapped on Technologic Systems TS-5500"
-	depends on X86
-	select MTD_PARTITIONS
+	depends on TS5500 || COMPILE_TEST
 	select MTD_JEDECPROBE
 	select MTD_CFI_AMDSTD
 	help
@@ -149,7 +142,7 @@ config MTD_TS5500
 
 config MTD_SBC_GXX
 	tristate "CFI Flash device mapped on Arcom SBC-GXx boards"
-	depends on X86 && MTD_CFI_INTELEXT && MTD_PARTITIONS && MTD_COMPLEX_MAPPINGS
+	depends on X86 && MTD_CFI_INTELEXT && MTD_COMPLEX_MAPPINGS
 	help
 	  This provides a driver for the on-board flash of Arcom Control
 	  Systems' SBC-GXn family of boards, formerly known as SBC-MediaGX.
@@ -161,31 +154,12 @@ config MTD_SBC_GXX
 config MTD_PXA2XX
 	tristate "CFI Flash device mapped on Intel XScale PXA2xx based boards"
 	depends on (PXA25x || PXA27x) && MTD_CFI_INTELEXT
-	select MTD_PARTITIONS
 	help
 	  This provides a driver for the NOR flash attached to a PXA2xx chip.
 
-config MTD_OCTAGON
-	tristate "JEDEC Flash device mapped on Octagon 5066 SBC"
-	depends on X86 && MTD_JEDEC && MTD_COMPLEX_MAPPINGS
-	help
-	  This provides a 'mapping' driver which supports the way in which
-	  the flash chips are connected in the Octagon-5066 Single Board
-	  Computer. More information on the board is available at
-	  <http://www.octagonsystems.com/CPUpages/5066.html>.
-
-config MTD_VMAX
-	tristate "JEDEC Flash device mapped on Tempustech VMAX SBC301"
-	depends on X86 && MTD_JEDEC && MTD_COMPLEX_MAPPINGS
-	help
-	  This provides a 'mapping' driver which supports the way in which
-	  the flash chips are connected in the Tempustech VMAX SBC301 Single
-	  Board Computer. More information on the board is available at
-	  <http://www.tempustech.com/>.
-
 config MTD_SCx200_DOCFLASH
 	tristate "Flash device mapped with DOCCS on NatSemi SCx200"
-	depends on SCx200 && MTD_CFI && MTD_PARTITIONS
+	depends on SCx200 && MTD_CFI
 	help
 	  Enable support for a flash chip mapped using the DOCCS signal on a
 	  National Semiconductor SCx200 processor.
@@ -232,7 +206,7 @@ config MTD_CK804XROM
 
 config MTD_SCB2_FLASH
 	tristate "BIOS flash chip on Intel SCB2 boards"
-	depends on X86 && MTD_JEDECPROBE
+	depends on X86 && MTD_JEDECPROBE && PCI
 	help
 	  Support for treating the BIOS flash chip on Intel SCB2 boards
 	  as an MTD device - with this you can reprogram your BIOS.
@@ -247,25 +221,15 @@ config MTD_TSUNAMI
 
 config MTD_NETtel
 	tristate "CFI flash device on SnapGear/SecureEdge"
-	depends on X86 && MTD_PARTITIONS && MTD_JEDECPROBE
+	depends on X86 && MTD_JEDECPROBE
 	help
 	  Support for flash chips on NETtel/SecureEdge/SnapGear boards.
 
-config MTD_DILNETPC
-	tristate "CFI Flash device mapped on DIL/Net PC"
-	depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
+config MTD_LANTIQ
+	tristate "Lantiq SoC NOR support"
+	depends on LANTIQ
 	help
-	  MTD map driver for SSV DIL/Net PC Boards "DNP" and "ADNP".
-	  For details, see <http://www.ssv-embedded.de/ssv/pc104/p169.htm>
- 	  and <http://www.ssv-embedded.de/ssv/pc104/p170.htm>
-
-config MTD_DILNETPC_BOOTSIZE
-	hex "Size of DIL/Net PC flash boot partition"
-	depends on MTD_DILNETPC
-	default "0x80000"
-	help
-	  The amount of space taken up by the kernel or Etherboot
-	  on the DIL/Net PC flash chips.
+	  Support for NOR flash attached to the Lantiq SoC's External Bus Unit.
 
 config MTD_L440GX
 	tristate "BIOS flash chip on Intel L440GX boards"
@@ -276,42 +240,6 @@ config MTD_L440GX
 
 	  BE VERY CAREFUL.
 
-config MTD_TQM8XXL
-	tristate "CFI Flash device mapped on TQM8XXL"
-	depends on MTD_CFI && TQM8xxL
-	help
-	  The TQM8xxL PowerPC board has up to two banks of CFI-compliant
-	  chips, currently uses AMD one. This 'mapping' driver supports
-	  that arrangement, allowing the CFI probe and command set driver
-	  code to communicate with the chips on the TQM8xxL board. More at
-	  <http://www.denx.de/embedded-ppc-en.html>.
-
-config MTD_RPXLITE
-	tristate "CFI Flash device mapped on RPX Lite or CLLF"
-	depends on MTD_CFI && (RPXCLASSIC || RPXLITE)
-	help
-	  The RPXLite PowerPC board has CFI-compliant chips mapped in
-	  a strange sparse mapping. This 'mapping' driver supports that
-	  arrangement, allowing the CFI probe and command set driver code
-	  to communicate with the chips on the RPXLite board. More at
-	  <http://www.embeddedplanet.com/>.
-
-config MTD_MBX860
-	tristate "System flash on MBX860 board"
-	depends on MTD_CFI && MBX
-	help
-	  This enables access routines for the flash chips on the Motorola
-	  MBX860 board. If you have one of these boards and would like
-	  to use the flash chips on it, say 'Y'.
-
-config MTD_DBOX2
-	tristate "CFI Flash device mapped on D-Box2"
-	depends on DBOX2 && MTD_CFI_INTELSTD && MTD_CFI_INTELEXT && MTD_CFI_AMDSTD
-	help
-	  This enables access routines for the flash chips on the Nokia/Sagem
-	  D-Box 2 board. If you have one of these boards and would like to use
-	  the flash chips on it, say 'Y'.
-
 config MTD_CFI_FLAGADM
 	tristate "CFI Flash device mapping on FlagaDM"
 	depends on 8xx && MTD_CFI
@@ -319,14 +247,6 @@ config MTD_CFI_FLAGADM
 	  Mapping for the Flaga digital module. If you don't have one, ignore
 	  this setting.
 
-config MTD_REDWOOD
-	tristate "CFI Flash devices mapped on IBM Redwood"
-	depends on MTD_CFI && ( REDWOOD_4 || REDWOOD_5 || REDWOOD_6 )
-	help
-	  This enables access routines for the flash chips on the IBM
-	  Redwood board. If you have one of these boards and would like to
-	  use the flash chips on it, say 'Y'.
-
 config MTD_SOLUTIONENGINE
 	tristate "CFI Flash device mapped on Hitachi SolutionEngine"
 	depends on SUPERH && SOLUTION_ENGINE && MTD_CFI && MTD_REDBOOT_PARTS
@@ -334,20 +254,9 @@ config MTD_SOLUTIONENGINE
 	  This enables access to the flash chips on the Hitachi SolutionEngine and
 	  similar boards. Say 'Y' if you are building a kernel for such a board.
 
-config MTD_ARM_INTEGRATOR
-	tristate "CFI Flash device mapped on ARM Integrator/P720T"
-	depends on ARM && MTD_CFI
-
-config MTD_CDB89712
-	tristate "Cirrus CDB89712 evaluation board mappings"
-	depends on MTD_CFI && ARCH_CDB89712
-	help
-	  This enables access to the flash or ROM chips on the CDB89712 board.
-	  If you have such a board, say 'Y'.
-
 config MTD_SA1100
 	tristate "CFI Flash device mapped on StrongARM SA11x0"
-	depends on MTD_CFI && ARCH_SA1100 && MTD_PARTITIONS
+	depends on MTD_CFI && ARCH_SA1100
 	help
 	  This enables access to the flash chips on most platforms based on
 	  the SA1100 and SA1110, including the Assabet and the Compaq iPAQ.
@@ -370,36 +279,6 @@ config MTD_IXP4XX
 	  IXDP425 and Coyote. If you have an IXP4xx based board and
 	  would like to use the flash chips on it, say 'Y'.
 
-config MTD_IXP2000
-	tristate "CFI Flash device mapped on Intel IXP2000 based systems"
-	depends on MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP2000
-	help
-	  This enables MTD access to flash devices on platforms based
-	  on Intel's IXP2000 family of network processors. If you have an
-	  IXP2000 based board and would like to use the flash chips on it,
-	  say 'Y'.
-
-config MTD_FORTUNET
-	tristate "CFI Flash device mapped on the FortuNet board"
-	depends on MTD_CFI && MTD_PARTITIONS && SA1100_FORTUNET
-	help
-	  This enables access to the Flash on the FortuNet board.  If you
-	  have such a board, say 'Y'.
-
-config MTD_AUTCPU12
-	tristate "NV-RAM mapping AUTCPU12 board"
-	depends on ARCH_AUTCPU12
-	help
-	  This enables access to the NV-RAM on autronix autcpu12 board.
-	  If you have such a board, say 'Y'.
-
-config MTD_EDB7312
-	tristate "CFI Flash device mapped on EDB7312"
-	depends on ARCH_EDB7312 && MTD_CFI
-	help
-	  This enables access to the CFI Flash on the Cogent EDB7312 board.
-	  If you have such a board, say 'Y' here.
-
 config MTD_IMPA7
 	tristate "JEDEC Flash device mapped on impA7"
 	depends on ARM && MTD_JEDECPROBE
@@ -407,21 +286,6 @@ config MTD_IMPA7
 	  This enables access to the NOR Flash on the impA7 board of
 	  implementa GmbH. If you have such a board, say 'Y' here.
 
-config MTD_CEIVA
-	tristate "JEDEC Flash device mapped on Ceiva/Polaroid PhotoMax Digital Picture Frame"
-	depends on MTD_JEDECPROBE && ARCH_CEIVA
-	help
-	  This enables access to the flash chips on the Ceiva/Polaroid
-	  PhotoMax Digital Picture Frame.
-	  If you have such a device, say 'Y'.
-
-config MTD_H720X
-	tristate "Hynix evaluation board mappings"
-	depends on MTD_CFI && ( ARCH_H7201 || ARCH_H7202 )
-	help
-	  This enables access to the flash chips on the Hynix evaluation boards.
-	  If you have such a board, say 'Y'.
-
 # This needs CFI or JEDEC, depending on the cards found.
 config MTD_PCI
 	tristate "PCI MTD driver"
@@ -453,7 +317,6 @@ config MTD_PCMCIA_ANONYMOUS
 config MTD_BFIN_ASYNC
 	tristate "Blackfin BF533-STAMP Flash Chip Support"
 	depends on BFIN533_STAMP && MTD_CFI && MTD_COMPLEX_MAPPINGS
-	select MTD_PARTITIONS
 	default y
 	help
 	  Map driver which allows for simultaneous utilization of
@@ -463,9 +326,8 @@ config MTD_BFIN_ASYNC
 
 config MTD_GPIO_ADDR
 	tristate "GPIO-assisted Flash Chip Support"
-	depends on GENERIC_GPIO || GPIOLIB
+	depends on GPIOLIB
 	depends on MTD_COMPLEX_MAPPINGS
-	select MTD_PARTITIONS
 	help
 	  Map driver which allows flashes to be partially physically addressed
 	  and assisted by GPIOs.
@@ -474,33 +336,10 @@ config MTD_GPIO_ADDR
 
 config MTD_UCLINUX
 	bool "Generic uClinux RAM/ROM filesystem support"
-	depends on MTD_PARTITIONS && MTD_RAM=y && !MMU
+	depends on (MTD_RAM=y || MTD_ROM=y) && (!MMU || COLDFIRE)
 	help
 	  Map driver to support image based filesystems for uClinux.
 
-config MTD_WRSBC8260
-	tristate "Map driver for WindRiver PowerQUICC II MPC82xx board"
-	depends on (SBC82xx || SBC8560)
-	select MTD_PARTITIONS
-	select MTD_MAP_BANK_WIDTH_4
-	select MTD_MAP_BANK_WIDTH_1
-	select MTD_CFI_I1
-	select MTD_CFI_I4
-	help
-	  Map driver for WindRiver PowerQUICC II MPC82xx board. Drives
-	  all three flash regions on CS0, CS1 and CS6 if they are configured
-	  correctly by the boot loader.
-
-config MTD_DMV182
-        tristate "Map driver for Dy-4 SVME/DMV-182 board."
-        depends on DMV182
-        select MTD_PARTITIONS
-	select MTD_MAP_BANK_WIDTH_32
-	select MTD_CFI_I8
-	select MTD_CFI_AMDSTD
-        help
-          Map driver for Dy-4 SVME/DMV-182 board.
-
 config MTD_INTEL_VR_NOR
 	tristate "NOR flash on Intel Vermilion Range Expansion Bus CS0"
 	depends on PCI
@@ -551,4 +390,13 @@ config MTD_PISMO
 
 	  When built as a module, it will be called pismo.ko
 
+config MTD_LATCH_ADDR
+        tristate "Latch-assisted Flash Chip Support"
+        depends on MTD_COMPLEX_MAPPINGS
+        help
+          Map driver which allows flashes to be partially physically addressed
+          and have the upper address lines set by a board specific code.
+
+          If compiled as a module, it will be called latch-addr-flash.
+
 endmenu
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index bb035cd54c7..141c91a5b24 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -7,11 +7,8 @@ obj-$(CONFIG_MTD)		+= map_funcs.o
 endif
 
 # Chip mappings
-obj-$(CONFIG_MTD_CDB89712)	+= cdb89712.o
-obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o
 obj-$(CONFIG_MTD_CFI_FLAGADM)	+= cfi_flagadm.o
 obj-$(CONFIG_MTD_DC21285)	+= dc21285.o
-obj-$(CONFIG_MTD_DILNETPC)	+= dilnetpc.o
 obj-$(CONFIG_MTD_L440GX)	+= l440gx.o
 obj-$(CONFIG_MTD_AMD76XROM)	+= amd76xrom.o
 obj-$(CONFIG_MTD_ESB2ROM)	+= esb2rom.o
@@ -19,43 +16,30 @@ obj-$(CONFIG_MTD_ICHXROM)	+= ichxrom.o
 obj-$(CONFIG_MTD_CK804XROM)	+= ck804xrom.o
 obj-$(CONFIG_MTD_TSUNAMI)	+= tsunami_flash.o
 obj-$(CONFIG_MTD_PXA2XX)	+= pxa2xx-flash.o
-obj-$(CONFIG_MTD_MBX860)	+= mbx860.o
-obj-$(CONFIG_MTD_CEIVA)		+= ceiva.o
-obj-$(CONFIG_MTD_OCTAGON)	+= octagon-5066.o
 obj-$(CONFIG_MTD_PHYSMAP)	+= physmap.o
 obj-$(CONFIG_MTD_PHYSMAP_OF)	+= physmap_of.o
 obj-$(CONFIG_MTD_PISMO)		+= pismo.o
 obj-$(CONFIG_MTD_PMC_MSP_EVM)   += pmcmsp-flash.o
 obj-$(CONFIG_MTD_PCMCIA)	+= pcmciamtd.o
-obj-$(CONFIG_MTD_RPXLITE)	+= rpxlite.o
-obj-$(CONFIG_MTD_TQM8XXL)	+= tqm8xxl.o
 obj-$(CONFIG_MTD_SA1100)	+= sa1100-flash.o
 obj-$(CONFIG_MTD_SBC_GXX)	+= sbc_gxx.o
 obj-$(CONFIG_MTD_SC520CDP)	+= sc520cdp.o
 obj-$(CONFIG_MTD_NETSC520)	+= netsc520.o
 obj-$(CONFIG_MTD_TS5500)	+= ts5500_flash.o
 obj-$(CONFIG_MTD_SUN_UFLASH)	+= sun_uflash.o
-obj-$(CONFIG_MTD_VMAX)		+= vmax301.o
 obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx200_docflash.o
-obj-$(CONFIG_MTD_DBOX2)		+= dbox2-flash.o
 obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
 obj-$(CONFIG_MTD_PCI)		+= pci.o
-obj-$(CONFIG_MTD_AUTCPU12)	+= autcpu12-nvram.o
-obj-$(CONFIG_MTD_EDB7312)	+= edb7312.o
 obj-$(CONFIG_MTD_IMPA7)		+= impa7.o
-obj-$(CONFIG_MTD_FORTUNET)	+= fortunet.o
-obj-$(CONFIG_MTD_REDWOOD)	+= redwood.o
 obj-$(CONFIG_MTD_UCLINUX)	+= uclinux.o
 obj-$(CONFIG_MTD_NETtel)	+= nettel.o
 obj-$(CONFIG_MTD_SCB2_FLASH)	+= scb2_flash.o
-obj-$(CONFIG_MTD_H720X)		+= h720x-flash.o
 obj-$(CONFIG_MTD_IXP4XX)	+= ixp4xx.o
-obj-$(CONFIG_MTD_IXP2000)	+= ixp2000.o
-obj-$(CONFIG_MTD_WRSBC8260)	+= wr_sbc82xx_flash.o
-obj-$(CONFIG_MTD_DMV182)	+= dmv182.o
 obj-$(CONFIG_MTD_PLATRAM)	+= plat-ram.o
 obj-$(CONFIG_MTD_INTEL_VR_NOR)	+= intel_vr_nor.o
 obj-$(CONFIG_MTD_BFIN_ASYNC)	+= bfin-async-flash.o
 obj-$(CONFIG_MTD_RBTX4939)	+= rbtx4939-flash.o
 obj-$(CONFIG_MTD_VMU)		+= vmu-flash.o
 obj-$(CONFIG_MTD_GPIO_ADDR)	+= gpio-addr-flash.o
+obj-$(CONFIG_MTD_LATCH_ADDR)	+= latch-addr-flash.o
+obj-$(CONFIG_MTD_LANTIQ)	+= lantiq-flash.o
diff --git a/drivers/mtd/maps/amd76xrom.c b/drivers/mtd/maps/amd76xrom.c
index 19fe92db0c4..f7207b0a76d 100644
--- a/drivers/mtd/maps/amd76xrom.c
+++ b/drivers/mtd/maps/amd76xrom.c
@@ -82,7 +82,7 @@ static void amd76xrom_cleanup(struct amd76xrom_window *window)
 		if (map->rsrc.parent) {
 			release_resource(&map->rsrc);
 		}
-		del_mtd_device(map->mtd);
+		mtd_device_unregister(map->mtd);
 		map_destroy(map->mtd);
 		list_del(&map->list);
 		kfree(map);
@@ -100,8 +100,8 @@ static void amd76xrom_cleanup(struct amd76xrom_window *window)
 }
 
 
-static int __devinit amd76xrom_init_one (struct pci_dev *pdev,
-	const struct pci_device_id *ent)
+static int amd76xrom_init_one(struct pci_dev *pdev,
+			      const struct pci_device_id *ent)
 {
 	static char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL };
 	u8 byte;
@@ -149,11 +149,9 @@ static int __devinit amd76xrom_init_one (struct pci_dev *pdev,
 	if (request_resource(&iomem_resource, &window->rsrc)) {
 		window->rsrc.parent = NULL;
 		printk(KERN_ERR MOD_NAME
-			" %s(): Unable to register resource"
-			" 0x%.16llx-0x%.16llx - kernel bug?\n",
-			__func__,
-			(unsigned long long)window->rsrc.start,
-			(unsigned long long)window->rsrc.end);
+		       " %s(): Unable to register resource %pR - kernel bug?\n",
+		       __func__, &window->rsrc);
+		return -EBUSY;
 	}
 
 
@@ -264,7 +262,7 @@ static int __devinit amd76xrom_init_one (struct pci_dev *pdev,
 
 		/* Now that the mtd devices is complete claim and export it */
 		map->mtd->owner = THIS_MODULE;
-		if (add_mtd_device(map->mtd)) {
+		if (mtd_device_register(map->mtd, NULL, 0)) {
 			map_destroy(map->mtd);
 			map->mtd = NULL;
 			goto out;
@@ -291,7 +289,7 @@ static int __devinit amd76xrom_init_one (struct pci_dev *pdev,
 }
 
 
-static void __devexit amd76xrom_remove_one (struct pci_dev *pdev)
+static void amd76xrom_remove_one(struct pci_dev *pdev)
 {
 	struct amd76xrom_window *window = &amd76xrom_window;
 
@@ -349,4 +347,3 @@ module_exit(cleanup_amd76xrom);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Eric Biederman <ebiederman@lnxi.com>");
 MODULE_DESCRIPTION("MTD map driver for BIOS chips on the AMD76X southbridge");
-
diff --git a/drivers/mtd/maps/autcpu12-nvram.c b/drivers/mtd/maps/autcpu12-nvram.c
deleted file mode 100644
index 53664188fc4..00000000000
--- a/drivers/mtd/maps/autcpu12-nvram.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * NV-RAM memory access on autcpu12
- * (C) 2002 Thomas Gleixner (gleixner@autronix.de)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <mach/autcpu12.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-
-static struct mtd_info *sram_mtd;
-
-struct map_info autcpu12_sram_map = {
-	.name = "SRAM",
-	.size = 32768,
-	.bankwidth = 4,
-	.phys = 0x12000000,
-};
-
-static int __init init_autcpu12_sram (void)
-{
-	int err, save0, save1;
-
-	autcpu12_sram_map.virt = ioremap(0x12000000, SZ_128K);
-	if (!autcpu12_sram_map.virt) {
-		printk("Failed to ioremap autcpu12 NV-RAM space\n");
-		err = -EIO;
-		goto out;
-	}
-	simple_map_init(&autcpu_sram_map);
-
-	/*
-	 * Check for 32K/128K
-	 * read ofs 0
-	 * read ofs 0x10000
-	 * Write complement to ofs 0x100000
-	 * Read	and check result on ofs 0x0
-	 * Restore contents
-	 */
-	save0 = map_read32(&autcpu12_sram_map,0);
-	save1 = map_read32(&autcpu12_sram_map,0x10000);
-	map_write32(&autcpu12_sram_map,~save0,0x10000);
-	/* if we find this pattern on 0x0, we have 32K size
-	 * restore contents and exit
-	 */
-	if ( map_read32(&autcpu12_sram_map,0) != save0) {
-		map_write32(&autcpu12_sram_map,save0,0x0);
-		goto map;
-	}
-	/* We have a 128K found, restore 0x10000 and set size
-	 * to 128K
-	 */
-	map_write32(&autcpu12_sram_map,save1,0x10000);
-	autcpu12_sram_map.size = SZ_128K;
-
-map:
-	sram_mtd = do_map_probe("map_ram", &autcpu12_sram_map);
-	if (!sram_mtd) {
-		printk("NV-RAM probe failed\n");
-		err = -ENXIO;
-		goto out_ioremap;
-	}
-
-	sram_mtd->owner = THIS_MODULE;
-	sram_mtd->erasesize = 16;
-
-	if (add_mtd_device(sram_mtd)) {
-		printk("NV-RAM device addition failed\n");
-		err = -ENOMEM;
-		goto out_probe;
-	}
-
-	printk("NV-RAM device size %ldKiB registered on AUTCPU12\n",autcpu12_sram_map.size/SZ_1K);
-
-	return 0;
-
-out_probe:
-	map_destroy(sram_mtd);
-	sram_mtd = 0;
-
-out_ioremap:
-	iounmap((void *)autcpu12_sram_map.virt);
-out:
-	return err;
-}
-
-static void __exit cleanup_autcpu12_maps(void)
-{
-	if (sram_mtd) {
-		del_mtd_device(sram_mtd);
-		map_destroy(sram_mtd);
-		iounmap((void *)autcpu12_sram_map.virt);
-	}
-}
-
-module_init(init_autcpu12_sram);
-module_exit(cleanup_autcpu12_maps);
-
-MODULE_AUTHOR("Thomas Gleixner");
-MODULE_DESCRIPTION("autcpu12 NV-RAM map driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/bfin-async-flash.c b/drivers/mtd/maps/bfin-async-flash.c
index 85dd18193cf..6ea51e54904 100644
--- a/drivers/mtd/maps/bfin-async-flash.c
+++ b/drivers/mtd/maps/bfin-async-flash.c
@@ -14,7 +14,6 @@
  * Licensed under the GPL-2 or later.
  */
 
-#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mtd/mtd.h>
@@ -30,7 +29,8 @@
 #include <linux/io.h>
 #include <asm/unaligned.h>
 
-#define pr_devinit(fmt, args...) ({ static const __devinitconst char __fmt[] = fmt; printk(__fmt, ## args); })
+#define pr_devinit(fmt, args...) \
+		({ static const char __fmt[] = fmt; printk(__fmt, ## args); })
 
 #define DRIVER_NAME "bfin-async-flash"
 
@@ -41,9 +41,6 @@ struct async_state {
 	uint32_t flash_ambctl0, flash_ambctl1;
 	uint32_t save_ambctl0, save_ambctl1;
 	unsigned long irq_flags;
-#ifdef CONFIG_MTD_PARTITIONS
-	struct mtd_partition *parts;
-#endif
 };
 
 static void switch_to_flash(struct async_state *state)
@@ -124,14 +121,13 @@ static void bfin_flash_copy_to(struct map_info *map, unsigned long to, const voi
 	switch_back(state);
 }
 
-#ifdef CONFIG_MTD_PARTITIONS
-static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
-#endif
+static const char * const part_probe_types[] = {
+	"cmdlinepart", "RedBoot", NULL };
 
-static int __devinit bfin_flash_probe(struct platform_device *pdev)
+static int bfin_flash_probe(struct platform_device *pdev)
 {
 	int ret;
-	struct physmap_flash_data *pdata = pdev->dev.platform_data;
+	struct physmap_flash_data *pdata = dev_get_platdata(&pdev->dev);
 	struct resource *memory = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	struct resource *flash_ambctl = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	struct async_state *state;
@@ -146,7 +142,7 @@ static int __devinit bfin_flash_probe(struct platform_device *pdev)
 	state->map.write      = bfin_flash_write;
 	state->map.copy_to    = bfin_flash_copy_to;
 	state->map.bankwidth  = pdata->width;
-	state->map.size       = memory->end - memory->start + 1;
+	state->map.size       = resource_size(memory);
 	state->map.virt       = (void __iomem *)memory->start;
 	state->map.phys       = memory->start;
 	state->map.map_priv_1 = (unsigned long)state;
@@ -169,37 +165,19 @@ static int __devinit bfin_flash_probe(struct platform_device *pdev)
 		return -ENXIO;
 	}
 
-#ifdef CONFIG_MTD_PARTITIONS
-	ret = parse_mtd_partitions(state->mtd, part_probe_types, &pdata->parts, 0);
-	if (ret > 0) {
-		pr_devinit(KERN_NOTICE DRIVER_NAME ": Using commandline partition definition\n");
-		add_mtd_partitions(state->mtd, pdata->parts, ret);
-		state->parts = pdata->parts;
-
-	} else if (pdata->nr_parts) {
-		pr_devinit(KERN_NOTICE DRIVER_NAME ": Using board partition definition\n");
-		add_mtd_partitions(state->mtd, pdata->parts, pdata->nr_parts);
-
-	} else
-#endif
-	{
-		pr_devinit(KERN_NOTICE DRIVER_NAME ": no partition info available, registering whole flash at once\n");
-		add_mtd_device(state->mtd);
-	}
+	mtd_device_parse_register(state->mtd, part_probe_types, NULL,
+				  pdata->parts, pdata->nr_parts);
 
 	platform_set_drvdata(pdev, state);
 
 	return 0;
 }
 
-static int __devexit bfin_flash_remove(struct platform_device *pdev)
+static int bfin_flash_remove(struct platform_device *pdev)
 {
 	struct async_state *state = platform_get_drvdata(pdev);
 	gpio_free(state->enet_flash_pin);
-#ifdef CONFIG_MTD_PARTITIONS
-	del_mtd_partitions(state->mtd);
-	kfree(state->parts);
-#endif
+	mtd_device_unregister(state->mtd);
 	map_destroy(state->mtd);
 	kfree(state);
 	return 0;
@@ -207,23 +185,13 @@ static int __devexit bfin_flash_remove(struct platform_device *pdev)
 
 static struct platform_driver bfin_flash_driver = {
 	.probe		= bfin_flash_probe,
-	.remove		= __devexit_p(bfin_flash_remove),
+	.remove		= bfin_flash_remove,
 	.driver		= {
 		.name	= DRIVER_NAME,
 	},
 };
 
-static int __init bfin_flash_init(void)
-{
-	return platform_driver_register(&bfin_flash_driver);
-}
-module_init(bfin_flash_init);
-
-static void __exit bfin_flash_exit(void)
-{
-	platform_driver_unregister(&bfin_flash_driver);
-}
-module_exit(bfin_flash_exit);
+module_platform_driver(bfin_flash_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("MTD map driver for Blackfins with flash/ethernet on same async bank");
diff --git a/drivers/mtd/maps/cdb89712.c b/drivers/mtd/maps/cdb89712.c
deleted file mode 100644
index 8d92d8db9a9..00000000000
--- a/drivers/mtd/maps/cdb89712.c
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- * Flash on Cirrus CDB89712
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <mach/hardware.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-/* dynamic ioremap() areas */
-#define FLASH_START      0x00000000
-#define FLASH_SIZE       0x800000
-#define FLASH_WIDTH      4
-
-#define SRAM_START       0x60000000
-#define SRAM_SIZE        0xc000
-#define SRAM_WIDTH       4
-
-#define BOOTROM_START    0x70000000
-#define BOOTROM_SIZE     0x80
-#define BOOTROM_WIDTH    4
-
-
-static struct mtd_info *flash_mtd;
-
-struct map_info cdb89712_flash_map = {
-	.name = "flash",
-	.size = FLASH_SIZE,
-	.bankwidth = FLASH_WIDTH,
-	.phys = FLASH_START,
-};
-
-struct resource cdb89712_flash_resource = {
-	.name =   "Flash",
-	.start =  FLASH_START,
-	.end =    FLASH_START + FLASH_SIZE - 1,
-	.flags =  IORESOURCE_IO | IORESOURCE_BUSY,
-};
-
-static int __init init_cdb89712_flash (void)
-{
-	int err;
-
-	if (request_resource (&ioport_resource, &cdb89712_flash_resource)) {
-		printk(KERN_NOTICE "Failed to reserve Cdb89712 FLASH space\n");
-		err = -EBUSY;
-		goto out;
-	}
-
-	cdb89712_flash_map.virt = ioremap(FLASH_START, FLASH_SIZE);
-	if (!cdb89712_flash_map.virt) {
-		printk(KERN_NOTICE "Failed to ioremap Cdb89712 FLASH space\n");
-		err = -EIO;
-		goto out_resource;
-	}
-	simple_map_init(&cdb89712_flash_map);
-	flash_mtd = do_map_probe("cfi_probe", &cdb89712_flash_map);
-	if (!flash_mtd) {
-		flash_mtd = do_map_probe("map_rom", &cdb89712_flash_map);
-		if (flash_mtd)
-			flash_mtd->erasesize = 0x10000;
-	}
-	if (!flash_mtd) {
-		printk("FLASH probe failed\n");
-		err = -ENXIO;
-		goto out_ioremap;
-	}
-
-	flash_mtd->owner = THIS_MODULE;
-
-	if (add_mtd_device(flash_mtd)) {
-		printk("FLASH device addition failed\n");
-		err = -ENOMEM;
-		goto out_probe;
-	}
-
-	return 0;
-
-out_probe:
-	map_destroy(flash_mtd);
-	flash_mtd = 0;
-out_ioremap:
-	iounmap((void *)cdb89712_flash_map.virt);
-out_resource:
-	release_resource (&cdb89712_flash_resource);
-out:
-	return err;
-}
-
-
-
-
-
-static struct mtd_info *sram_mtd;
-
-struct map_info cdb89712_sram_map = {
-	.name = "SRAM",
-	.size = SRAM_SIZE,
-	.bankwidth = SRAM_WIDTH,
-	.phys = SRAM_START,
-};
-
-struct resource cdb89712_sram_resource = {
-	.name =   "SRAM",
-	.start =  SRAM_START,
-	.end =    SRAM_START + SRAM_SIZE - 1,
-	.flags =  IORESOURCE_IO | IORESOURCE_BUSY,
-};
-
-static int __init init_cdb89712_sram (void)
-{
-	int err;
-
-	if (request_resource (&ioport_resource, &cdb89712_sram_resource)) {
-		printk(KERN_NOTICE "Failed to reserve Cdb89712 SRAM space\n");
-		err = -EBUSY;
-		goto out;
-	}
-
-	cdb89712_sram_map.virt = ioremap(SRAM_START, SRAM_SIZE);
-	if (!cdb89712_sram_map.virt) {
-		printk(KERN_NOTICE "Failed to ioremap Cdb89712 SRAM space\n");
-		err = -EIO;
-		goto out_resource;
-	}
-	simple_map_init(&cdb89712_sram_map);
-	sram_mtd = do_map_probe("map_ram", &cdb89712_sram_map);
-	if (!sram_mtd) {
-		printk("SRAM probe failed\n");
-		err = -ENXIO;
-		goto out_ioremap;
-	}
-
-	sram_mtd->owner = THIS_MODULE;
-	sram_mtd->erasesize = 16;
-
-	if (add_mtd_device(sram_mtd)) {
-		printk("SRAM device addition failed\n");
-		err = -ENOMEM;
-		goto out_probe;
-	}
-
-	return 0;
-
-out_probe:
-	map_destroy(sram_mtd);
-	sram_mtd = 0;
-out_ioremap:
-	iounmap((void *)cdb89712_sram_map.virt);
-out_resource:
-	release_resource (&cdb89712_sram_resource);
-out:
-	return err;
-}
-
-
-
-
-
-
-
-static struct mtd_info *bootrom_mtd;
-
-struct map_info cdb89712_bootrom_map = {
-	.name = "BootROM",
-	.size = BOOTROM_SIZE,
-	.bankwidth = BOOTROM_WIDTH,
-	.phys = BOOTROM_START,
-};
-
-struct resource cdb89712_bootrom_resource = {
-	.name =   "BootROM",
-	.start =  BOOTROM_START,
-	.end =    BOOTROM_START + BOOTROM_SIZE - 1,
-	.flags =  IORESOURCE_IO | IORESOURCE_BUSY,
-};
-
-static int __init init_cdb89712_bootrom (void)
-{
-	int err;
-
-	if (request_resource (&ioport_resource, &cdb89712_bootrom_resource)) {
-		printk(KERN_NOTICE "Failed to reserve Cdb89712 BOOTROM space\n");
-		err = -EBUSY;
-		goto out;
-	}
-
-	cdb89712_bootrom_map.virt = ioremap(BOOTROM_START, BOOTROM_SIZE);
-	if (!cdb89712_bootrom_map.virt) {
-		printk(KERN_NOTICE "Failed to ioremap Cdb89712 BootROM space\n");
-		err = -EIO;
-		goto out_resource;
-	}
-	simple_map_init(&cdb89712_bootrom_map);
-	bootrom_mtd = do_map_probe("map_rom", &cdb89712_bootrom_map);
-	if (!bootrom_mtd) {
-		printk("BootROM probe failed\n");
-		err = -ENXIO;
-		goto out_ioremap;
-	}
-
-	bootrom_mtd->owner = THIS_MODULE;
-	bootrom_mtd->erasesize = 0x10000;
-
-	if (add_mtd_device(bootrom_mtd)) {
-		printk("BootROM device addition failed\n");
-		err = -ENOMEM;
-		goto out_probe;
-	}
-
-	return 0;
-
-out_probe:
-	map_destroy(bootrom_mtd);
-	bootrom_mtd = 0;
-out_ioremap:
-	iounmap((void *)cdb89712_bootrom_map.virt);
-out_resource:
-	release_resource (&cdb89712_bootrom_resource);
-out:
-	return err;
-}
-
-
-
-
-
-static int __init init_cdb89712_maps(void)
-{
-
-       	printk(KERN_INFO "Cirrus CDB89712 MTD mappings:\n  Flash 0x%x at 0x%x\n  SRAM 0x%x at 0x%x\n  BootROM 0x%x at 0x%x\n",
-	       FLASH_SIZE, FLASH_START, SRAM_SIZE, SRAM_START, BOOTROM_SIZE, BOOTROM_START);
-
-	init_cdb89712_flash();
-	init_cdb89712_sram();
-	init_cdb89712_bootrom();
-
-	return 0;
-}
-
-
-static void __exit cleanup_cdb89712_maps(void)
-{
-	if (sram_mtd) {
-		del_mtd_device(sram_mtd);
-		map_destroy(sram_mtd);
-		iounmap((void *)cdb89712_sram_map.virt);
-		release_resource (&cdb89712_sram_resource);
-	}
-
-	if (flash_mtd) {
-		del_mtd_device(flash_mtd);
-		map_destroy(flash_mtd);
-		iounmap((void *)cdb89712_flash_map.virt);
-		release_resource (&cdb89712_flash_resource);
-	}
-
-	if (bootrom_mtd) {
-		del_mtd_device(bootrom_mtd);
-		map_destroy(bootrom_mtd);
-		iounmap((void *)cdb89712_bootrom_map.virt);
-		release_resource (&cdb89712_bootrom_resource);
-	}
-}
-
-module_init(init_cdb89712_maps);
-module_exit(cleanup_cdb89712_maps);
-
-MODULE_AUTHOR("Ray L");
-MODULE_DESCRIPTION("ARM CDB89712 map driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/ceiva.c b/drivers/mtd/maps/ceiva.c
deleted file mode 100644
index c09f4f57093..00000000000
--- a/drivers/mtd/maps/ceiva.c
+++ /dev/null
@@ -1,347 +0,0 @@
-/*
- * Ceiva flash memory driver.
- * Copyright (C) 2002 Rob Scott <rscott@mtrob.fdns.net>
- *
- * Note: this driver supports jedec compatible devices. Modification
- * for CFI compatible devices should be straight forward: change
- * jedec_probe to cfi_probe.
- *
- * Based on: sa1100-flash.c, which has the following copyright:
- * Flash memory access on SA11x0 based devices
- *
- * (C) 2000 Nicolas Pitre <nico@fluxnic.net>
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/concat.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/io.h>
-#include <asm/sizes.h>
-
-/*
- * This isn't complete yet, so...
- */
-#define CONFIG_MTD_CEIVA_STATICMAP
-
-#ifdef CONFIG_MTD_CEIVA_STATICMAP
-/*
- * See include/linux/mtd/partitions.h for definition of the mtd_partition
- * structure.
- *
- * Please note:
- *  1. The flash size given should be the largest flash size that can
- *     be accomodated.
- *
- *  2. The bus width must defined in clps_setup_flash.
- *
- * The MTD layer will detect flash chip aliasing and reduce the size of
- * the map accordingly.
- *
- */
-
-#ifdef CONFIG_ARCH_CEIVA
-/* Flash / Partition sizing */
-/* For the 28F8003, we use the block mapping to calcuate the sizes */
-#define MAX_SIZE_KiB                  (16 + 8 + 8 + 96 + (7*128))
-#define BOOT_PARTITION_SIZE_KiB       (16)
-#define PARAMS_PARTITION_SIZE_KiB     (8)
-#define KERNEL_PARTITION_SIZE_KiB     (4*128)
-/* Use both remaing portion of first flash, and all of second flash */
-#define ROOT_PARTITION_SIZE_KiB       (3*128) + (8*128)
-
-static struct mtd_partition ceiva_partitions[] = {
-	{
-		.name = "Ceiva BOOT partition",
-		.size   = BOOT_PARTITION_SIZE_KiB*1024,
-		.offset = 0,
-
-	},{
-		.name = "Ceiva parameters partition",
-		.size   = PARAMS_PARTITION_SIZE_KiB*1024,
-		.offset = (16 + 8) * 1024,
-	},{
-		.name = "Ceiva kernel partition",
-		.size = (KERNEL_PARTITION_SIZE_KiB)*1024,
-		.offset = 0x20000,
-
-	},{
-		.name = "Ceiva root filesystem partition",
-		.offset = MTDPART_OFS_APPEND,
-		.size = (ROOT_PARTITION_SIZE_KiB)*1024,
-	}
-};
-#endif
-
-static int __init clps_static_partitions(struct mtd_partition **parts)
-{
-	int nb_parts = 0;
-
-#ifdef CONFIG_ARCH_CEIVA
-	if (machine_is_ceiva()) {
-		*parts       = ceiva_partitions;
-		nb_parts     = ARRAY_SIZE(ceiva_partitions);
-	}
-#endif
-	return nb_parts;
-}
-#endif
-
-struct clps_info {
-	unsigned long base;
-	unsigned long size;
-	int width;
-	void *vbase;
-	struct map_info *map;
-	struct mtd_info *mtd;
-	struct resource *res;
-};
-
-#define NR_SUBMTD 4
-
-static struct clps_info info[NR_SUBMTD];
-
-static int __init clps_setup_mtd(struct clps_info *clps, int nr, struct mtd_info **rmtd)
-{
-	struct mtd_info *subdev[nr];
-	struct map_info *maps;
-	int i, found = 0, ret = 0;
-
-	/*
-	 * Allocate the map_info structs in one go.
-	 */
-	maps = kzalloc(sizeof(struct map_info) * nr, GFP_KERNEL);
-	if (!maps)
-		return -ENOMEM;
-	/*
-	 * Claim and then map the memory regions.
-	 */
-	for (i = 0; i < nr; i++) {
-		if (clps[i].base == (unsigned long)-1)
-			break;
-
-		clps[i].res = request_mem_region(clps[i].base, clps[i].size, "clps flash");
-		if (!clps[i].res) {
-			ret = -EBUSY;
-			break;
-		}
-
-		clps[i].map = maps + i;
-
-		clps[i].map->name = "clps flash";
-		clps[i].map->phys = clps[i].base;
-
-		clps[i].vbase = ioremap(clps[i].base, clps[i].size);
-		if (!clps[i].vbase) {
-			ret = -ENOMEM;
-			break;
-		}
-
-		clps[i].map->virt = (void __iomem *)clps[i].vbase;
-		clps[i].map->bankwidth = clps[i].width;
-		clps[i].map->size = clps[i].size;
-
-		simple_map_init(&clps[i].map);
-
-		clps[i].mtd = do_map_probe("jedec_probe", clps[i].map);
-		if (clps[i].mtd == NULL) {
-			ret = -ENXIO;
-			break;
-		}
-		clps[i].mtd->owner = THIS_MODULE;
-		subdev[i] = clps[i].mtd;
-
-		printk(KERN_INFO "clps flash: JEDEC device at 0x%08lx, %dMiB, "
-			"%d-bit\n", clps[i].base, clps[i].mtd->size >> 20,
-			clps[i].width * 8);
-		found += 1;
-	}
-
-	/*
-	 * ENXIO is special.  It means we didn't find a chip when
-	 * we probed.  We need to tear down the mapping, free the
-	 * resource and mark it as such.
-	 */
-	if (ret == -ENXIO) {
-		iounmap(clps[i].vbase);
-		clps[i].vbase = NULL;
-		release_resource(clps[i].res);
-		clps[i].res = NULL;
-	}
-
-	/*
-	 * If we found one device, don't bother with concat support.
-	 * If we found multiple devices, use concat if we have it
-	 * available, otherwise fail.
-	 */
-	if (ret == 0 || ret == -ENXIO) {
-		if (found == 1) {
-			*rmtd = subdev[0];
-			ret = 0;
-		} else if (found > 1) {
-			/*
-			 * We detected multiple devices.  Concatenate
-			 * them together.
-			 */
-#ifdef CONFIG_MTD_CONCAT
-			*rmtd = mtd_concat_create(subdev, found,
-						  "clps flash");
-			if (*rmtd == NULL)
-				ret = -ENXIO;
-#else
-			printk(KERN_ERR "clps flash: multiple devices "
-			       "found but MTD concat support disabled.\n");
-			ret = -ENXIO;
-#endif
-		}
-	}
-
-	/*
-	 * If we failed, clean up.
-	 */
-	if (ret) {
-		do {
-			if (clps[i].mtd)
-				map_destroy(clps[i].mtd);
-			if (clps[i].vbase)
-				iounmap(clps[i].vbase);
-			if (clps[i].res)
-				release_resource(clps[i].res);
-		} while (i--);
-
-		kfree(maps);
-	}
-
-	return ret;
-}
-
-static void __exit clps_destroy_mtd(struct clps_info *clps, struct mtd_info *mtd)
-{
-	int i;
-
-	del_mtd_partitions(mtd);
-
-	if (mtd != clps[0].mtd)
-		mtd_concat_destroy(mtd);
-
-	for (i = NR_SUBMTD; i >= 0; i--) {
-		if (clps[i].mtd)
-			map_destroy(clps[i].mtd);
-		if (clps[i].vbase)
-			iounmap(clps[i].vbase);
-		if (clps[i].res)
-			release_resource(clps[i].res);
-	}
-	kfree(clps[0].map);
-}
-
-/*
- * We define the memory space, size, and width for the flash memory
- * space here.
- */
-
-static int __init clps_setup_flash(void)
-{
-	int nr = 0;
-
-#ifdef CONFIG_ARCH_CEIVA
-	if (machine_is_ceiva()) {
-		info[0].base = CS0_PHYS_BASE;
-		info[0].size = SZ_32M;
-		info[0].width = CEIVA_FLASH_WIDTH;
-		info[1].base = CS1_PHYS_BASE;
-		info[1].size = SZ_32M;
-		info[1].width = CEIVA_FLASH_WIDTH;
-		nr = 2;
-	}
-#endif
-	return nr;
-}
-
-static struct mtd_partition *parsed_parts;
-static const char *probes[] = { "cmdlinepart", "RedBoot", NULL };
-
-static void __init clps_locate_partitions(struct mtd_info *mtd)
-{
-	const char *part_type = NULL;
-	int nr_parts = 0;
-	do {
-		/*
-		 * Partition selection stuff.
-		 */
-		nr_parts = parse_mtd_partitions(mtd, probes, &parsed_parts, 0);
-		if (nr_parts > 0) {
-			part_type = "command line";
-			break;
-		}
-#ifdef CONFIG_MTD_CEIVA_STATICMAP
-		nr_parts = clps_static_partitions(&parsed_parts);
-		if (nr_parts > 0) {
-			part_type = "static";
-			break;
-		}
-		printk("found: %d partitions\n", nr_parts);
-#endif
-	} while (0);
-
-	if (nr_parts == 0) {
-		printk(KERN_NOTICE "clps flash: no partition info "
-			"available, registering whole flash\n");
-		add_mtd_device(mtd);
-	} else {
-		printk(KERN_NOTICE "clps flash: using %s partition "
-			"definition\n", part_type);
-		add_mtd_partitions(mtd, parsed_parts, nr_parts);
-	}
-
-	/* Always succeeds. */
-}
-
-static void __exit clps_destroy_partitions(void)
-{
-	kfree(parsed_parts);
-}
-
-static struct mtd_info *mymtd;
-
-static int __init clps_mtd_init(void)
-{
-	int ret;
-	int nr;
-
-	nr = clps_setup_flash();
-	if (nr < 0)
-		return nr;
-
-	ret = clps_setup_mtd(info, nr, &mymtd);
-	if (ret)
-		return ret;
-
-	clps_locate_partitions(mymtd);
-
-	return 0;
-}
-
-static void __exit clps_mtd_cleanup(void)
-{
-	clps_destroy_mtd(info, mymtd);
-	clps_destroy_partitions();
-}
-
-module_init(clps_mtd_init);
-module_exit(clps_mtd_cleanup);
-
-MODULE_AUTHOR("Rob Scott");
-MODULE_DESCRIPTION("Cirrus Logic JEDEC map driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/cfi_flagadm.c b/drivers/mtd/maps/cfi_flagadm.c
index b4ed8161191..d504b3d1791 100644
--- a/drivers/mtd/maps/cfi_flagadm.c
+++ b/drivers/mtd/maps/cfi_flagadm.c
@@ -33,7 +33,7 @@
 
 
 /* We split the flash chip up into four parts.
- * 1: bootloader firts 128k			(0x00000000 - 0x0001FFFF) size 0x020000
+ * 1: bootloader first 128k			(0x00000000 - 0x0001FFFF) size 0x020000
  * 2: kernel 640k					(0x00020000 - 0x000BFFFF) size 0x0A0000
  * 3: compressed 1536k root ramdisk	(0x000C0000 - 0x0023FFFF) size 0x180000
  * 4: writeable diskpartition (jffs)(0x00240000 - 0x003FFFFF) size 0x1C0000
@@ -55,13 +55,13 @@
 #define FLASH_PARTITION3_SIZE 0x001C0000
 
 
-struct map_info flagadm_map = {
+static struct map_info flagadm_map = {
 		.name =		"FlagaDM flash device",
 		.size =		FLASH_SIZE,
 		.bankwidth =	2,
 };
 
-struct mtd_partition flagadm_parts[] = {
+static struct mtd_partition flagadm_parts[] = {
 	{
 		.name =		"Bootloader",
 		.offset	=	FLASH_PARTITION0_ADDR,
@@ -107,24 +107,24 @@ static int __init init_flagadm(void)
 	mymtd = do_map_probe("cfi_probe", &flagadm_map);
 	if (mymtd) {
 		mymtd->owner = THIS_MODULE;
-		add_mtd_partitions(mymtd, flagadm_parts, PARTITION_COUNT);
+		mtd_device_register(mymtd, flagadm_parts, PARTITION_COUNT);
 		printk(KERN_NOTICE "FlagaDM flash device initialized\n");
 		return 0;
 	}
 
-	iounmap((void *)flagadm_map.virt);
+	iounmap((void __iomem *)flagadm_map.virt);
 	return -ENXIO;
 }
 
 static void __exit cleanup_flagadm(void)
 {
 	if (mymtd) {
-		del_mtd_partitions(mymtd);
+		mtd_device_unregister(mymtd);
 		map_destroy(mymtd);
 	}
 	if (flagadm_map.virt) {
-		iounmap((void *)flagadm_map.virt);
-		flagadm_map.virt = 0;
+		iounmap((void __iomem *)flagadm_map.virt);
+		flagadm_map.virt = NULL;
 	}
 }
 
diff --git a/drivers/mtd/maps/ck804xrom.c b/drivers/mtd/maps/ck804xrom.c
index ddb462bea9b..0455166f05f 100644
--- a/drivers/mtd/maps/ck804xrom.c
+++ b/drivers/mtd/maps/ck804xrom.c
@@ -94,7 +94,7 @@ static void ck804xrom_cleanup(struct ck804xrom_window *window)
 		if (map->rsrc.parent)
 			release_resource(&map->rsrc);
 
-		del_mtd_device(map->mtd);
+		mtd_device_unregister(map->mtd);
 		map_destroy(map->mtd);
 		list_del(&map->list);
 		kfree(map);
@@ -112,8 +112,8 @@ static void ck804xrom_cleanup(struct ck804xrom_window *window)
 }
 
 
-static int __devinit ck804xrom_init_one (struct pci_dev *pdev,
-					 const struct pci_device_id *ent)
+static int ck804xrom_init_one(struct pci_dev *pdev,
+			      const struct pci_device_id *ent)
 {
 	static char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL };
 	u8 byte;
@@ -178,11 +178,8 @@ static int __devinit ck804xrom_init_one (struct pci_dev *pdev,
 	if (request_resource(&iomem_resource, &window->rsrc)) {
 		window->rsrc.parent = NULL;
 		printk(KERN_ERR MOD_NAME
-			" %s(): Unable to register resource"
-			" 0x%.016llx-0x%.016llx - kernel bug?\n",
-			__func__,
-			(unsigned long long)window->rsrc.start,
-			(unsigned long long)window->rsrc.end);
+		       " %s(): Unable to register resource %pR - kernel bug?\n",
+			__func__, &window->rsrc);
 	}
 
 
@@ -294,7 +291,7 @@ static int __devinit ck804xrom_init_one (struct pci_dev *pdev,
 
 		/* Now that the mtd devices is complete claim and export it */
 		map->mtd->owner = THIS_MODULE;
-		if (add_mtd_device(map->mtd)) {
+		if (mtd_device_register(map->mtd, NULL, 0)) {
 			map_destroy(map->mtd);
 			map->mtd = NULL;
 			goto out;
@@ -311,8 +308,7 @@ static int __devinit ck804xrom_init_one (struct pci_dev *pdev,
 
  out:
 	/* Free any left over map structures */
-	if (map)
-		kfree(map);
+	kfree(map);
 
 	/* See if I have any map structures */
 	if (list_empty(&window->maps)) {
@@ -323,7 +319,7 @@ static int __devinit ck804xrom_init_one (struct pci_dev *pdev,
 }
 
 
-static void __devexit ck804xrom_remove_one (struct pci_dev *pdev)
+static void ck804xrom_remove_one(struct pci_dev *pdev)
 {
 	struct ck804xrom_window *window = &ck804xrom_window;
 
diff --git a/drivers/mtd/maps/dbox2-flash.c b/drivers/mtd/maps/dbox2-flash.c
deleted file mode 100644
index cfacfa6f45d..00000000000
--- a/drivers/mtd/maps/dbox2-flash.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * D-Box 2 flash driver
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/errno.h>
-
-/* partition_info gives details on the logical partitions that the split the
- * single flash device into. If the size if zero we use up to the end of the
- * device. */
-static struct mtd_partition partition_info[]= {
-	{
-	.name		= "BR bootloader",
-	.size		= 128 * 1024,
-	.offset		= 0,
-	.mask_flags	= MTD_WRITEABLE
-	},
-	{
-	.name		= "FLFS (U-Boot)",
-	.size		= 128 * 1024,
-	.offset		= MTDPART_OFS_APPEND,
-	.mask_flags	= 0
-	},
-	{
-	.name		= "Root (SquashFS)",
-	.size		= 7040 * 1024,
-	.offset		= MTDPART_OFS_APPEND,
-	.mask_flags	= 0
-	},
-	{
-	.name		= "var (JFFS2)",
-	.size		= 896 * 1024,
-	.offset		= MTDPART_OFS_APPEND,
-	.mask_flags	= 0
-	},
-	{
-	.name		= "Flash without bootloader",
-	.size		= MTDPART_SIZ_FULL,
-	.offset		= 128 * 1024,
-	.mask_flags	= 0
-	},
-	{
-	.name		= "Complete Flash",
-	.size		= MTDPART_SIZ_FULL,
-	.offset		= 0,
-	.mask_flags	= MTD_WRITEABLE
-	}
-};
-
-#define NUM_PARTITIONS ARRAY_SIZE(partition_info)
-
-#define WINDOW_ADDR 0x10000000
-#define WINDOW_SIZE 0x800000
-
-static struct mtd_info *mymtd;
-
-
-struct map_info dbox2_flash_map = {
-	.name		= "D-Box 2 flash memory",
-	.size		= WINDOW_SIZE,
-	.bankwidth	= 4,
-	.phys		= WINDOW_ADDR,
-};
-
-static int __init init_dbox2_flash(void)
-{
-       	printk(KERN_NOTICE "D-Box 2 flash driver (size->0x%X mem->0x%X)\n", WINDOW_SIZE, WINDOW_ADDR);
-	dbox2_flash_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE);
-
-	if (!dbox2_flash_map.virt) {
-		printk("Failed to ioremap\n");
-		return -EIO;
-	}
-	simple_map_init(&dbox2_flash_map);
-
-	// Probe for dual Intel 28F320 or dual AMD
-	mymtd = do_map_probe("cfi_probe", &dbox2_flash_map);
-	if (!mymtd) {
-	    // Probe for single Intel 28F640
-	    dbox2_flash_map.bankwidth = 2;
-
-	    mymtd = do_map_probe("cfi_probe", &dbox2_flash_map);
-	}
-
-	if (mymtd) {
-		mymtd->owner = THIS_MODULE;
-
-                /* Create MTD devices for each partition. */
-	        add_mtd_partitions(mymtd, partition_info, NUM_PARTITIONS);
-
-		return 0;
-	}
-
-	iounmap((void *)dbox2_flash_map.virt);
-	return -ENXIO;
-}
-
-static void __exit cleanup_dbox2_flash(void)
-{
-	if (mymtd) {
-		del_mtd_partitions(mymtd);
-		map_destroy(mymtd);
-	}
-	if (dbox2_flash_map.virt) {
-		iounmap((void *)dbox2_flash_map.virt);
-		dbox2_flash_map.virt = 0;
-	}
-}
-
-module_init(init_dbox2_flash);
-module_exit(cleanup_dbox2_flash);
-
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Kári Davíðsson <kd@flaga.is>, Bastian Blank <waldi@tuxbox.org>, Alexander Wild <wild@te-elektronik.com>");
-MODULE_DESCRIPTION("MTD map driver for D-Box 2 board");
diff --git a/drivers/mtd/maps/dc21285.c b/drivers/mtd/maps/dc21285.c
index b3cb3a18380..f8a7dd14cee 100644
--- a/drivers/mtd/maps/dc21285.c
+++ b/drivers/mtd/maps/dc21285.c
@@ -143,20 +143,11 @@ static struct map_info dc21285_map = {
 	.copy_from = dc21285_copy_from,
 };
 
-
 /* Partition stuff */
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition *dc21285_parts;
-static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
-#endif
+static const char * const probes[] = { "RedBoot", "cmdlinepart", NULL };
 
 static int __init init_dc21285(void)
 {
-
-#ifdef CONFIG_MTD_PARTITIONS
-	int nrparts;
-#endif
-
 	/* Determine bankwidth */
 	switch (*CSR_SA110_CNTL & (3<<14)) {
 		case SA110_CNTL_ROMWIDTH_8:
@@ -204,13 +195,7 @@ static int __init init_dc21285(void)
 
 	dc21285_mtd->owner = THIS_MODULE;
 
-#ifdef CONFIG_MTD_PARTITIONS
-	nrparts = parse_mtd_partitions(dc21285_mtd, probes, &dc21285_parts, 0);
-	if (nrparts > 0)
-		add_mtd_partitions(dc21285_mtd, dc21285_parts, nrparts);
-	else
-#endif
-		add_mtd_device(dc21285_mtd);
+	mtd_device_parse_register(dc21285_mtd, probes, NULL, NULL, 0);
 
 	if(machine_is_ebsa285()) {
 		/*
@@ -232,14 +217,7 @@ static int __init init_dc21285(void)
 
 static void __exit cleanup_dc21285(void)
 {
-#ifdef CONFIG_MTD_PARTITIONS
-	if (dc21285_parts) {
-		del_mtd_partitions(dc21285_mtd);
-		kfree(dc21285_parts);
-	} else
-#endif
-		del_mtd_device(dc21285_mtd);
-
+	mtd_device_unregister(dc21285_mtd);
 	map_destroy(dc21285_mtd);
 	iounmap(dc21285_map.virt);
 }
diff --git a/drivers/mtd/maps/dilnetpc.c b/drivers/mtd/maps/dilnetpc.c
deleted file mode 100644
index 0713e3a5a22..00000000000
--- a/drivers/mtd/maps/dilnetpc.c
+++ /dev/null
@@ -1,495 +0,0 @@
-/* dilnetpc.c -- MTD map driver for SSV DIL/Net PC Boards "DNP" and "ADNP"
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- *
- * The DIL/Net PC is a tiny embedded PC board made by SSV Embedded Systems
- * featuring the AMD Elan SC410 processor. There are two variants of this
- * board: DNP/1486 and ADNP/1486. The DNP version has 2 megs of flash
- * ROM (Intel 28F016S3) and 8 megs of DRAM, the ADNP version has 4 megs
- * flash and 16 megs of RAM.
- * For details, see http://www.ssv-embedded.de/ssv/pc104/p169.htm
- * and http://www.ssv-embedded.de/ssv/pc104/p170.htm
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/concat.h>
-
-#include <asm/io.h>
-
-/*
-** The DIL/NetPC keeps its BIOS in two distinct flash blocks.
-** Destroying any of these blocks transforms the DNPC into
-** a paperweight (albeit not a very useful one, considering
-** it only weighs a few grams).
-**
-** Therefore, the BIOS blocks must never be erased or written to
-** except by people who know exactly what they are doing (e.g.
-** to install a BIOS update). These partitions are marked read-only
-** by default, but can be made read/write by undefining
-** DNPC_BIOS_BLOCKS_WRITEPROTECTED:
-*/
-#define DNPC_BIOS_BLOCKS_WRITEPROTECTED
-
-/*
-** The ID string (in ROM) is checked to determine whether we
-** are running on a DNP/1486 or ADNP/1486
-*/
-#define BIOSID_BASE	0x000fe100
-
-#define ID_DNPC	"DNP1486"
-#define ID_ADNP	"ADNP1486"
-
-/*
-** Address where the flash should appear in CPU space
-*/
-#define FLASH_BASE	0x2000000
-
-/*
-** Chip Setup and Control (CSC) indexed register space
-*/
-#define CSC_INDEX	0x22
-#define CSC_DATA	0x23
-
-#define CSC_MMSWAR	0x30	/* MMS window C-F attributes register */
-#define CSC_MMSWDSR	0x31	/* MMS window C-F device select register */
-
-#define CSC_RBWR	0xa7	/* GPIO Read-Back/Write Register B */
-
-#define CSC_CR		0xd0	/* internal I/O device disable/Echo */
-				/* Z-bus/configuration register */
-
-#define CSC_PCCMDCR	0xf1	/* PC card mode and DMA control register */
-
-
-/*
-** PC Card indexed register space:
-*/
-
-#define PCC_INDEX	0x3e0
-#define PCC_DATA	0x3e1
-
-#define PCC_AWER_B		0x46	/* Socket B Address Window enable register */
-#define PCC_MWSAR_1_Lo	0x58	/* memory window 1 start address low register */
-#define PCC_MWSAR_1_Hi	0x59	/* memory window 1 start address high register */
-#define PCC_MWEAR_1_Lo	0x5A	/* memory window 1 stop address low register */
-#define PCC_MWEAR_1_Hi	0x5B	/* memory window 1 stop address high register */
-#define PCC_MWAOR_1_Lo	0x5C	/* memory window 1 address offset low register */
-#define PCC_MWAOR_1_Hi	0x5D	/* memory window 1 address offset high register */
-
-
-/*
-** Access to SC4x0's Chip Setup and Control (CSC)
-** and PC Card (PCC) indexed registers:
-*/
-static inline void setcsc(int reg, unsigned char data)
-{
-	outb(reg, CSC_INDEX);
-	outb(data, CSC_DATA);
-}
-
-static inline unsigned char getcsc(int reg)
-{
-	outb(reg, CSC_INDEX);
-	return(inb(CSC_DATA));
-}
-
-static inline void setpcc(int reg, unsigned char data)
-{
-	outb(reg, PCC_INDEX);
-	outb(data, PCC_DATA);
-}
-
-static inline unsigned char getpcc(int reg)
-{
-	outb(reg, PCC_INDEX);
-	return(inb(PCC_DATA));
-}
-
-
-/*
-************************************************************
-** Enable access to DIL/NetPC's flash by mapping it into
-** the SC4x0's MMS Window C.
-************************************************************
-*/
-static void dnpc_map_flash(unsigned long flash_base, unsigned long flash_size)
-{
-	unsigned long flash_end = flash_base + flash_size - 1;
-
-	/*
-	** enable setup of MMS windows C-F:
-	*/
-	/* - enable PC Card indexed register space */
-	setcsc(CSC_CR, getcsc(CSC_CR) | 0x2);
-	/* - set PC Card controller to operate in standard mode */
-	setcsc(CSC_PCCMDCR, getcsc(CSC_PCCMDCR) & ~1);
-
-	/*
-	** Program base address and end address of window
-	** where the flash ROM should appear in CPU address space
-	*/
-	setpcc(PCC_MWSAR_1_Lo, (flash_base >> 12) & 0xff);
-	setpcc(PCC_MWSAR_1_Hi, (flash_base >> 20) & 0x3f);
-	setpcc(PCC_MWEAR_1_Lo, (flash_end >> 12) & 0xff);
-	setpcc(PCC_MWEAR_1_Hi, (flash_end >> 20) & 0x3f);
-
-	/* program offset of first flash location to appear in this window (0) */
-	setpcc(PCC_MWAOR_1_Lo, ((0 - flash_base) >> 12) & 0xff);
-	setpcc(PCC_MWAOR_1_Hi, ((0 - flash_base)>> 20) & 0x3f);
-
-	/* set attributes for MMS window C: non-cacheable, write-enabled */
-	setcsc(CSC_MMSWAR, getcsc(CSC_MMSWAR) & ~0x11);
-
-	/* select physical device ROMCS0 (i.e. flash) for MMS Window C */
-	setcsc(CSC_MMSWDSR, getcsc(CSC_MMSWDSR) & ~0x03);
-
-	/* enable memory window 1 */
-	setpcc(PCC_AWER_B, getpcc(PCC_AWER_B) | 0x02);
-
-	/* now disable PC Card indexed register space again */
-	setcsc(CSC_CR, getcsc(CSC_CR) & ~0x2);
-}
-
-
-/*
-************************************************************
-** Disable access to DIL/NetPC's flash by mapping it into
-** the SC4x0's MMS Window C.
-************************************************************
-*/
-static void dnpc_unmap_flash(void)
-{
-	/* - enable PC Card indexed register space */
-	setcsc(CSC_CR, getcsc(CSC_CR) | 0x2);
-
-	/* disable memory window 1 */
-	setpcc(PCC_AWER_B, getpcc(PCC_AWER_B) & ~0x02);
-
-	/* now disable PC Card indexed register space again */
-	setcsc(CSC_CR, getcsc(CSC_CR) & ~0x2);
-}
-
-
-
-/*
-************************************************************
-** Enable/Disable VPP to write to flash
-************************************************************
-*/
-
-static DEFINE_SPINLOCK(dnpc_spin);
-static int        vpp_counter = 0;
-/*
-** This is what has to be done for the DNP board ..
-*/
-static void dnp_set_vpp(struct map_info *not_used, int on)
-{
-	spin_lock_irq(&dnpc_spin);
-
-	if (on)
-	{
-		if(++vpp_counter == 1)
-			setcsc(CSC_RBWR, getcsc(CSC_RBWR) & ~0x4);
-	}
-	else
-	{
-		if(--vpp_counter == 0)
-			setcsc(CSC_RBWR, getcsc(CSC_RBWR) | 0x4);
-		else
-			BUG_ON(vpp_counter < 0);
-	}
-	spin_unlock_irq(&dnpc_spin);
-}
-
-/*
-** .. and this the ADNP version:
-*/
-static void adnp_set_vpp(struct map_info *not_used, int on)
-{
-	spin_lock_irq(&dnpc_spin);
-
-	if (on)
-	{
-		if(++vpp_counter == 1)
-			setcsc(CSC_RBWR, getcsc(CSC_RBWR) & ~0x8);
-	}
-	else
-	{
-		if(--vpp_counter == 0)
-			setcsc(CSC_RBWR, getcsc(CSC_RBWR) | 0x8);
-		else
-			BUG_ON(vpp_counter < 0);
-	}
-	spin_unlock_irq(&dnpc_spin);
-}
-
-
-
-#define DNP_WINDOW_SIZE		0x00200000	/*  DNP flash size is 2MiB  */
-#define ADNP_WINDOW_SIZE	0x00400000	/* ADNP flash size is 4MiB */
-#define WINDOW_ADDR		FLASH_BASE
-
-static struct map_info dnpc_map = {
-	.name = "ADNP Flash Bank",
-	.size = ADNP_WINDOW_SIZE,
-	.bankwidth = 1,
-	.set_vpp = adnp_set_vpp,
-	.phys = WINDOW_ADDR
-};
-
-/*
-** The layout of the flash is somewhat "strange":
-**
-** 1.  960 KiB (15 blocks) : Space for ROM Bootloader and user data
-** 2.   64 KiB (1 block)   : System BIOS
-** 3.  960 KiB (15 blocks) : User Data (DNP model) or
-** 3. 3008 KiB (47 blocks) : User Data (ADNP model)
-** 4.   64 KiB (1 block)   : System BIOS Entry
-*/
-
-static struct mtd_partition partition_info[]=
-{
-	{
-		.name =		"ADNP boot",
-		.offset =	0,
-		.size =		0xf0000,
-	},
-	{
-		.name =		"ADNP system BIOS",
-		.offset =	MTDPART_OFS_NXTBLK,
-		.size =		0x10000,
-#ifdef DNPC_BIOS_BLOCKS_WRITEPROTECTED
-		.mask_flags =	MTD_WRITEABLE,
-#endif
-	},
-	{
-		.name =		"ADNP file system",
-		.offset =	MTDPART_OFS_NXTBLK,
-		.size =		0x2f0000,
-	},
-	{
-		.name =		"ADNP system BIOS entry",
-		.offset =	MTDPART_OFS_NXTBLK,
-		.size =		MTDPART_SIZ_FULL,
-#ifdef DNPC_BIOS_BLOCKS_WRITEPROTECTED
-		.mask_flags =	MTD_WRITEABLE,
-#endif
-	},
-};
-
-#define NUM_PARTITIONS ARRAY_SIZE(partition_info)
-
-static struct mtd_info *mymtd;
-static struct mtd_info *lowlvl_parts[NUM_PARTITIONS];
-static struct mtd_info *merged_mtd;
-
-/*
-** "Highlevel" partition info:
-**
-** Using the MTD concat layer, we can re-arrange partitions to our
-** liking: we construct a virtual MTD device by concatenating the
-** partitions, specifying the sequence such that the boot block
-** is immediately followed by the filesystem block (i.e. the stupid
-** system BIOS block is mapped to a different place). When re-partitioning
-** this concatenated MTD device, we can set the boot block size to
-** an arbitrary (though erase block aligned) value i.e. not one that
-** is dictated by the flash's physical layout. We can thus set the
-** boot block to be e.g. 64 KB (which is fully sufficient if we want
-** to boot an etherboot image) or to -say- 1.5 MB if we want to boot
-** a large kernel image. In all cases, the remainder of the flash
-** is available as file system space.
-*/
-
-static struct mtd_partition higlvl_partition_info[]=
-{
-	{
-		.name =		"ADNP boot block",
-		.offset =	0,
-		.size =		CONFIG_MTD_DILNETPC_BOOTSIZE,
-	},
-	{
-		.name =		"ADNP file system space",
-		.offset =	MTDPART_OFS_NXTBLK,
-		.size =		ADNP_WINDOW_SIZE-CONFIG_MTD_DILNETPC_BOOTSIZE-0x20000,
-	},
-	{
-		.name =		"ADNP system BIOS + BIOS Entry",
-		.offset =	MTDPART_OFS_NXTBLK,
-		.size =		MTDPART_SIZ_FULL,
-#ifdef DNPC_BIOS_BLOCKS_WRITEPROTECTED
-		.mask_flags =	MTD_WRITEABLE,
-#endif
-	},
-};
-
-#define NUM_HIGHLVL_PARTITIONS ARRAY_SIZE(higlvl_partition_info)
-
-
-static int dnp_adnp_probe(void)
-{
-	char *biosid, rc = -1;
-
-	biosid = (char*)ioremap(BIOSID_BASE, 16);
-	if(biosid)
-	{
-		if(!strcmp(biosid, ID_DNPC))
-			rc = 1;		/* this is a DNPC  */
-		else if(!strcmp(biosid, ID_ADNP))
-			rc = 0;		/* this is a ADNPC */
-	}
-	iounmap((void *)biosid);
-	return(rc);
-}
-
-
-static int __init init_dnpc(void)
-{
-	int is_dnp;
-
-	/*
-	** determine hardware (DNP/ADNP/invalid)
-	*/
-	if((is_dnp = dnp_adnp_probe()) < 0)
-		return -ENXIO;
-
-	/*
-	** Things are set up for ADNP by default
-	** -> modify all that needs to be different for DNP
-	*/
-	if(is_dnp)
-	{	/*
-		** Adjust window size, select correct set_vpp function.
-		** The partitioning scheme is identical on both DNP
-		** and ADNP except for the size of the third partition.
-		*/
-		int i;
-		dnpc_map.size          = DNP_WINDOW_SIZE;
-		dnpc_map.set_vpp       = dnp_set_vpp;
-		partition_info[2].size = 0xf0000;
-
-		/*
-		** increment all string pointers so the leading 'A' gets skipped,
-		** thus turning all occurrences of "ADNP ..." into "DNP ..."
-		*/
-		++dnpc_map.name;
-		for(i = 0; i < NUM_PARTITIONS; i++)
-			++partition_info[i].name;
-		higlvl_partition_info[1].size = DNP_WINDOW_SIZE -
-			CONFIG_MTD_DILNETPC_BOOTSIZE - 0x20000;
-		for(i = 0; i < NUM_HIGHLVL_PARTITIONS; i++)
-			++higlvl_partition_info[i].name;
-	}
-
-	printk(KERN_NOTICE "DIL/Net %s flash: 0x%lx at 0x%llx\n",
-		is_dnp ? "DNPC" : "ADNP", dnpc_map.size, (unsigned long long)dnpc_map.phys);
-
-	dnpc_map.virt = ioremap_nocache(dnpc_map.phys, dnpc_map.size);
-
-	dnpc_map_flash(dnpc_map.phys, dnpc_map.size);
-
-	if (!dnpc_map.virt) {
-		printk("Failed to ioremap_nocache\n");
-		return -EIO;
-	}
-	simple_map_init(&dnpc_map);
-
-	printk("FLASH virtual address: 0x%p\n", dnpc_map.virt);
-
-	mymtd = do_map_probe("jedec_probe", &dnpc_map);
-
-	if (!mymtd)
-		mymtd = do_map_probe("cfi_probe", &dnpc_map);
-
-	/*
-	** If flash probes fail, try to make flashes accessible
-	** at least as ROM. Ajust erasesize in this case since
-	** the default one (128M) will break our partitioning
-	*/
-	if (!mymtd)
-		if((mymtd = do_map_probe("map_rom", &dnpc_map)))
-			mymtd->erasesize = 0x10000;
-
-	if (!mymtd) {
-		iounmap(dnpc_map.virt);
-		return -ENXIO;
-	}
-
-	mymtd->owner = THIS_MODULE;
-
-	/*
-	** Supply pointers to lowlvl_parts[] array to add_mtd_partitions()
-	** -> add_mtd_partitions() will _not_ register MTD devices for
-	** the partitions, but will instead store pointers to the MTD
-	** objects it creates into our lowlvl_parts[] array.
-	** NOTE: we arrange the pointers such that the sequence of the
-	**       partitions gets re-arranged: partition #2 follows
-	**       partition #0.
-	*/
-	partition_info[0].mtdp = &lowlvl_parts[0];
-	partition_info[1].mtdp = &lowlvl_parts[2];
-	partition_info[2].mtdp = &lowlvl_parts[1];
-	partition_info[3].mtdp = &lowlvl_parts[3];
-
-	add_mtd_partitions(mymtd, partition_info, NUM_PARTITIONS);
-
-	/*
-	** now create a virtual MTD device by concatenating the for partitions
-	** (in the sequence given by the lowlvl_parts[] array.
-	*/
-	merged_mtd = mtd_concat_create(lowlvl_parts, NUM_PARTITIONS, "(A)DNP Flash Concatenated");
-	if(merged_mtd)
-	{	/*
-		** now partition the new device the way we want it. This time,
-		** we do not supply mtd pointers in higlvl_partition_info, so
-		** add_mtd_partitions() will register the devices.
-		*/
-		add_mtd_partitions(merged_mtd, higlvl_partition_info, NUM_HIGHLVL_PARTITIONS);
-	}
-
-	return 0;
-}
-
-static void __exit cleanup_dnpc(void)
-{
-	if(merged_mtd) {
-		del_mtd_partitions(merged_mtd);
-		mtd_concat_destroy(merged_mtd);
-	}
-
-	if (mymtd) {
-		del_mtd_partitions(mymtd);
-		map_destroy(mymtd);
-	}
-	if (dnpc_map.virt) {
-		iounmap(dnpc_map.virt);
-		dnpc_unmap_flash();
-		dnpc_map.virt = NULL;
-	}
-}
-
-module_init(init_dnpc);
-module_exit(cleanup_dnpc);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Sysgo Real-Time Solutions GmbH");
-MODULE_DESCRIPTION("MTD map driver for SSV DIL/NetPC DNP & ADNP");
diff --git a/drivers/mtd/maps/dmv182.c b/drivers/mtd/maps/dmv182.c
deleted file mode 100644
index d171674eb2e..00000000000
--- a/drivers/mtd/maps/dmv182.c
+++ /dev/null
@@ -1,146 +0,0 @@
-
-/*
- * drivers/mtd/maps/dmv182.c
- *
- * Flash map driver for the Dy4 SVME182 board
- *
- * Copyright 2003-2004, TimeSys Corporation
- *
- * Based on the SVME181 flash map, by Tom Nelson, Dot4, Inc. for TimeSys Corp.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <asm/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/errno.h>
-
-/*
- * This driver currently handles only the 16MiB user flash bank 1 on the
- * board.  It does not provide access to bank 0 (contains the Dy4 FFW), bank 2
- * (VxWorks boot), or the optional 48MiB expansion flash.
- *
- * scott.wood@timesys.com: On the newer boards with 128MiB flash, it
- * now supports the first 96MiB (the boot flash bank containing FFW
- * is excluded).  The VxWorks loader is in partition 1.
- */
-
-#define FLASH_BASE_ADDR 0xf0000000
-#define FLASH_BANK_SIZE (128*1024*1024)
-
-MODULE_AUTHOR("Scott Wood, TimeSys Corporation <scott.wood@timesys.com>");
-MODULE_DESCRIPTION("User-programmable flash device on the Dy4 SVME182 board");
-MODULE_LICENSE("GPL");
-
-static struct map_info svme182_map = {
-	.name		= "Dy4 SVME182",
-	.bankwidth	= 32,
-	.size		=  128 * 1024 * 1024
-};
-
-#define BOOTIMAGE_PART_SIZE		((6*1024*1024)-RESERVED_PART_SIZE)
-
-// Allow 6MiB for the kernel
-#define NEW_BOOTIMAGE_PART_SIZE  (6 * 1024 * 1024)
-// Allow 1MiB for the bootloader
-#define NEW_BOOTLOADER_PART_SIZE (1024 * 1024)
-// Use the remaining 9MiB at the end of flash for the RFS
-#define NEW_RFS_PART_SIZE        (0x01000000 - NEW_BOOTLOADER_PART_SIZE - \
-                                  NEW_BOOTIMAGE_PART_SIZE)
-
-static struct mtd_partition svme182_partitions[] = {
-	// The Lower PABS is only 128KiB, but the partition code doesn't
-	// like partitions that don't end on the largest erase block
-	// size of the device, even if all of the erase blocks in the
-	// partition are small ones.  The hardware should prevent
-	// writes to the actual PABS areas.
-	{
-		name:       "Lower PABS and CPU 0 bootloader or kernel",
-		size:       6*1024*1024,
-		offset:     0,
-	},
-	{
-		name:       "Root Filesystem",
-		size:       10*1024*1024,
-		offset:     MTDPART_OFS_NXTBLK
-	},
-	{
-		name:       "CPU1 Bootloader",
-		size:       1024*1024,
-		offset:     MTDPART_OFS_NXTBLK,
-	},
-	{
-		name:       "Extra",
-		size:       110*1024*1024,
-		offset:     MTDPART_OFS_NXTBLK
-	},
-	{
-		name:       "Foundation Firmware and Upper PABS",
-		size:       1024*1024,
-		offset:     MTDPART_OFS_NXTBLK,
-		mask_flags: MTD_WRITEABLE // read-only
-	}
-};
-
-static struct mtd_info *this_mtd;
-
-static int __init init_svme182(void)
-{
-	struct mtd_partition *partitions;
-	int num_parts = ARRAY_SIZE(svme182_partitions);
-
-	partitions = svme182_partitions;
-
-	svme182_map.virt = ioremap(FLASH_BASE_ADDR, svme182_map.size);
-
-	if (svme182_map.virt == 0) {
-		printk("Failed to ioremap FLASH memory area.\n");
-		return -EIO;
-	}
-
-	simple_map_init(&svme182_map);
-
-	this_mtd = do_map_probe("cfi_probe", &svme182_map);
-	if (!this_mtd)
-	{
-		iounmap((void *)svme182_map.virt);
-		return -ENXIO;
-	}
-
-	printk(KERN_NOTICE "SVME182 flash device: %dMiB at 0x%08x\n",
-		   this_mtd->size >> 20, FLASH_BASE_ADDR);
-
-	this_mtd->owner = THIS_MODULE;
-	add_mtd_partitions(this_mtd, partitions, num_parts);
-
-	return 0;
-}
-
-static void __exit cleanup_svme182(void)
-{
-	if (this_mtd)
-	{
-		del_mtd_partitions(this_mtd);
-		map_destroy(this_mtd);
-	}
-
-	if (svme182_map.virt)
-	{
-		iounmap((void *)svme182_map.virt);
-		svme182_map.virt = 0;
-	}
-
-	return;
-}
-
-module_init(init_svme182);
-module_exit(cleanup_svme182);
diff --git a/drivers/mtd/maps/edb7312.c b/drivers/mtd/maps/edb7312.c
deleted file mode 100644
index be9e90b4458..00000000000
--- a/drivers/mtd/maps/edb7312.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Handle mapping of the NOR flash on Cogent EDB7312 boards
- *
- * Copyright 2002 SYSGO Real-Time Solutions GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-
-#ifdef CONFIG_MTD_PARTITIONS
-#include <linux/mtd/partitions.h>
-#endif
-
-#define WINDOW_ADDR 0x00000000      /* physical properties of flash */
-#define WINDOW_SIZE 0x01000000
-#define BUSWIDTH    2
-#define FLASH_BLOCKSIZE_MAIN	0x20000
-#define FLASH_NUMBLOCKS_MAIN	128
-/* can be "cfi_probe", "jedec_probe", "map_rom", NULL }; */
-#define PROBETYPES { "cfi_probe", NULL }
-
-#define MSG_PREFIX "EDB7312-NOR:"   /* prefix for our printk()'s */
-#define MTDID      "edb7312-nor"    /* for mtdparts= partitioning */
-
-static struct mtd_info *mymtd;
-
-struct map_info edb7312nor_map = {
-	.name = "NOR flash on EDB7312",
-	.size = WINDOW_SIZE,
-	.bankwidth = BUSWIDTH,
-	.phys = WINDOW_ADDR,
-};
-
-#ifdef CONFIG_MTD_PARTITIONS
-
-/*
- * MTD partitioning stuff
- */
-static struct mtd_partition static_partitions[3] =
-{
-	{
-		.name = "ARMboot",
-		.size = 0x40000,
-		.offset = 0
-	},
-	{
-		.name = "Kernel",
-		.size = 0x200000,
-		.offset = 0x40000
-	},
-	{
-		.name = "RootFS",
-		.size = 0xDC0000,
-		.offset = 0x240000
-	},
-};
-
-static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
-
-#endif
-
-static int                   mtd_parts_nb = 0;
-static struct mtd_partition *mtd_parts    = 0;
-
-static int __init init_edb7312nor(void)
-{
-	static const char *rom_probe_types[] = PROBETYPES;
-	const char **type;
-	const char *part_type = 0;
-
-       	printk(KERN_NOTICE MSG_PREFIX "0x%08x at 0x%08x\n",
-	       WINDOW_SIZE, WINDOW_ADDR);
-	edb7312nor_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE);
-
-	if (!edb7312nor_map.virt) {
-		printk(MSG_PREFIX "failed to ioremap\n");
-		return -EIO;
-	}
-
-	simple_map_init(&edb7312nor_map);
-
-	mymtd = 0;
-	type = rom_probe_types;
-	for(; !mymtd && *type; type++) {
-		mymtd = do_map_probe(*type, &edb7312nor_map);
-	}
-	if (mymtd) {
-		mymtd->owner = THIS_MODULE;
-
-#ifdef CONFIG_MTD_PARTITIONS
-		mtd_parts_nb = parse_mtd_partitions(mymtd, probes, &mtd_parts, MTDID);
-		if (mtd_parts_nb > 0)
-		  part_type = "detected";
-
-		if (mtd_parts_nb == 0)
-		{
-			mtd_parts = static_partitions;
-			mtd_parts_nb = ARRAY_SIZE(static_partitions);
-			part_type = "static";
-		}
-#endif
-		add_mtd_device(mymtd);
-		if (mtd_parts_nb == 0)
-		  printk(KERN_NOTICE MSG_PREFIX "no partition info available\n");
-		else
-		{
-			printk(KERN_NOTICE MSG_PREFIX
-			       "using %s partition definition\n", part_type);
-			add_mtd_partitions(mymtd, mtd_parts, mtd_parts_nb);
-		}
-		return 0;
-	}
-
-	iounmap((void *)edb7312nor_map.virt);
-	return -ENXIO;
-}
-
-static void __exit cleanup_edb7312nor(void)
-{
-	if (mymtd) {
-		del_mtd_device(mymtd);
-		map_destroy(mymtd);
-	}
-	if (edb7312nor_map.virt) {
-		iounmap((void *)edb7312nor_map.virt);
-		edb7312nor_map.virt = 0;
-	}
-}
-
-module_init(init_edb7312nor);
-module_exit(cleanup_edb7312nor);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Marius Groeger <mag@sysgo.de>");
-MODULE_DESCRIPTION("Generic configurable MTD map driver");
diff --git a/drivers/mtd/maps/esb2rom.c b/drivers/mtd/maps/esb2rom.c
index d12c93dc1aa..f784cf0caa1 100644
--- a/drivers/mtd/maps/esb2rom.c
+++ b/drivers/mtd/maps/esb2rom.c
@@ -128,7 +128,7 @@ static void esb2rom_cleanup(struct esb2rom_window *window)
 	list_for_each_entry_safe(map, scratch, &window->maps, list) {
 		if (map->rsrc.parent)
 			release_resource(&map->rsrc);
-		del_mtd_device(map->mtd);
+		mtd_device_unregister(map->mtd);
 		map_destroy(map->mtd);
 		list_del(&map->list);
 		kfree(map);
@@ -144,8 +144,8 @@ static void esb2rom_cleanup(struct esb2rom_window *window)
 	pci_dev_put(window->pdev);
 }
 
-static int __devinit esb2rom_init_one(struct pci_dev *pdev,
-				      const struct pci_device_id *ent)
+static int esb2rom_init_one(struct pci_dev *pdev,
+			    const struct pci_device_id *ent)
 {
 	static char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL };
 	struct esb2rom_window *window = &esb2rom_window;
@@ -242,12 +242,9 @@ static int __devinit esb2rom_init_one(struct pci_dev *pdev,
 	window->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
 	if (request_resource(&iomem_resource, &window->rsrc)) {
 		window->rsrc.parent = NULL;
-		printk(KERN_DEBUG MOD_NAME
-			": %s(): Unable to register resource"
-			" 0x%.08llx-0x%.08llx - kernel bug?\n",
-			__func__,
-			(unsigned long long)window->rsrc.start,
-			(unsigned long long)window->rsrc.end);
+		printk(KERN_DEBUG MOD_NAME ": "
+		       "%s(): Unable to register resource %pR - kernel bug?\n",
+			__func__, &window->rsrc);
 	}
 
 	/* Map the firmware hub into my address space. */
@@ -355,7 +352,7 @@ static int __devinit esb2rom_init_one(struct pci_dev *pdev,
 
 		/* Now that the mtd devices is complete claim and export it */
 		map->mtd->owner = THIS_MODULE;
-		if (add_mtd_device(map->mtd)) {
+		if (mtd_device_register(map->mtd, NULL, 0)) {
 			map_destroy(map->mtd);
 			map->mtd = NULL;
 			goto out;
@@ -381,13 +378,13 @@ static int __devinit esb2rom_init_one(struct pci_dev *pdev,
 	return 0;
 }
 
-static void __devexit esb2rom_remove_one (struct pci_dev *pdev)
+static void esb2rom_remove_one(struct pci_dev *pdev)
 {
 	struct esb2rom_window *window = &esb2rom_window;
 	esb2rom_cleanup(window);
 }
 
-static struct pci_device_id esb2rom_pci_tbl[] __devinitdata = {
+static struct pci_device_id esb2rom_pci_tbl[] = {
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0,
 	  PCI_ANY_ID, PCI_ANY_ID, },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0,
diff --git a/drivers/mtd/maps/fortunet.c b/drivers/mtd/maps/fortunet.c
deleted file mode 100644
index 1e43124d498..00000000000
--- a/drivers/mtd/maps/fortunet.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/* fortunet.c memory map
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-
-#define MAX_NUM_REGIONS		4
-#define MAX_NUM_PARTITIONS	8
-
-#define DEF_WINDOW_ADDR_PHY	0x00000000
-#define DEF_WINDOW_SIZE		0x00800000		// 8 Mega Bytes
-
-#define MTD_FORTUNET_PK		"MTD FortuNet: "
-
-#define MAX_NAME_SIZE		128
-
-struct map_region
-{
-	int			window_addr_physical;
-	int			altbankwidth;
-	struct map_info		map_info;
-	struct mtd_info		*mymtd;
-	struct mtd_partition	parts[MAX_NUM_PARTITIONS];
-	char			map_name[MAX_NAME_SIZE];
-	char			parts_name[MAX_NUM_PARTITIONS][MAX_NAME_SIZE];
-};
-
-static struct map_region	map_regions[MAX_NUM_REGIONS];
-static int			map_regions_set[MAX_NUM_REGIONS] = {0,0,0,0};
-static int			map_regions_parts[MAX_NUM_REGIONS] = {0,0,0,0};
-
-
-
-struct map_info default_map = {
-	.size = DEF_WINDOW_SIZE,
-	.bankwidth = 4,
-};
-
-static char * __init get_string_option(char *dest,int dest_size,char *sor)
-{
-	if(!dest_size)
-		return sor;
-	dest_size--;
-	while(*sor)
-	{
-		if(*sor==',')
-		{
-			sor++;
-			break;
-		}
-		else if(*sor=='\"')
-		{
-			sor++;
-			while(*sor)
-			{
-				if(*sor=='\"')
-				{
-					sor++;
-					break;
-				}
-				*dest = *sor;
-				dest++;
-				sor++;
-				dest_size--;
-				if(!dest_size)
-				{
-					*dest = 0;
-					return sor;
-				}
-			}
-		}
-		else
-		{
-			*dest = *sor;
-			dest++;
-			sor++;
-			dest_size--;
-			if(!dest_size)
-			{
-				*dest = 0;
-				return sor;
-			}
-		}
-	}
-	*dest = 0;
-	return sor;
-}
-
-static int __init MTD_New_Region(char *line)
-{
-	char	string[MAX_NAME_SIZE];
-	int	params[6];
-	get_options (get_string_option(string,sizeof(string),line),6,params);
-	if(params[0]<1)
-	{
-		printk(MTD_FORTUNET_PK "Bad parameters for MTD Region "
-			" name,region-number[,base,size,bankwidth,altbankwidth]\n");
-		return 1;
-	}
-	if((params[1]<0)||(params[1]>=MAX_NUM_REGIONS))
-	{
-		printk(MTD_FORTUNET_PK "Bad region index of %d only have 0..%u regions\n",
-			params[1],MAX_NUM_REGIONS-1);
-		return 1;
-	}
-	memset(&map_regions[params[1]],0,sizeof(map_regions[params[1]]));
-	memcpy(&map_regions[params[1]].map_info,
-		&default_map,sizeof(map_regions[params[1]].map_info));
-        map_regions_set[params[1]] = 1;
-        map_regions[params[1]].window_addr_physical = DEF_WINDOW_ADDR_PHY;
-        map_regions[params[1]].altbankwidth = 2;
-        map_regions[params[1]].mymtd = NULL;
-	map_regions[params[1]].map_info.name = map_regions[params[1]].map_name;
-	strcpy(map_regions[params[1]].map_info.name,string);
-	if(params[0]>1)
-	{
-		map_regions[params[1]].window_addr_physical = params[2];
-	}
-	if(params[0]>2)
-	{
-		map_regions[params[1]].map_info.size = params[3];
-	}
-	if(params[0]>3)
-	{
-		map_regions[params[1]].map_info.bankwidth = params[4];
-	}
-	if(params[0]>4)
-	{
-		map_regions[params[1]].altbankwidth = params[5];
-	}
-	return 1;
-}
-
-static int __init MTD_New_Partition(char *line)
-{
-	char	string[MAX_NAME_SIZE];
-	int	params[4];
-	get_options (get_string_option(string,sizeof(string),line),4,params);
-	if(params[0]<3)
-	{
-		printk(MTD_FORTUNET_PK "Bad parameters for MTD Partition "
-			" name,region-number,size,offset\n");
-		return 1;
-	}
-	if((params[1]<0)||(params[1]>=MAX_NUM_REGIONS))
-	{
-		printk(MTD_FORTUNET_PK "Bad region index of %d only have 0..%u regions\n",
-			params[1],MAX_NUM_REGIONS-1);
-		return 1;
-	}
-	if(map_regions_parts[params[1]]>=MAX_NUM_PARTITIONS)
-	{
-		printk(MTD_FORTUNET_PK "Out of space for partition in this region\n");
-		return 1;
-	}
-	map_regions[params[1]].parts[map_regions_parts[params[1]]].name =
-		map_regions[params[1]].	parts_name[map_regions_parts[params[1]]];
-	strcpy(map_regions[params[1]].parts[map_regions_parts[params[1]]].name,string);
-	map_regions[params[1]].parts[map_regions_parts[params[1]]].size =
-		params[2];
-	map_regions[params[1]].parts[map_regions_parts[params[1]]].offset =
-		params[3];
-	map_regions[params[1]].parts[map_regions_parts[params[1]]].mask_flags = 0;
-	map_regions_parts[params[1]]++;
-	return 1;
-}
-
-__setup("MTD_Region=", MTD_New_Region);
-__setup("MTD_Partition=", MTD_New_Partition);
-
-/* Backwards-spelling-compatibility */
-__setup("MTD_Partion=", MTD_New_Partition);
-
-static int __init init_fortunet(void)
-{
-	int	ix,iy;
-	for(iy=ix=0;ix<MAX_NUM_REGIONS;ix++)
-	{
-		if(map_regions_parts[ix]&&(!map_regions_set[ix]))
-		{
-			printk(MTD_FORTUNET_PK "Region %d is not setup (Setting to default)\n",
-				ix);
-			memset(&map_regions[ix],0,sizeof(map_regions[ix]));
-			memcpy(&map_regions[ix].map_info,&default_map,
-				sizeof(map_regions[ix].map_info));
-			map_regions_set[ix] = 1;
-			map_regions[ix].window_addr_physical = DEF_WINDOW_ADDR_PHY;
-			map_regions[ix].altbankwidth = 2;
-			map_regions[ix].mymtd = NULL;
-			map_regions[ix].map_info.name = map_regions[ix].map_name;
-			strcpy(map_regions[ix].map_info.name,"FORTUNET");
-		}
-		if(map_regions_set[ix])
-		{
-			iy++;
-			printk(KERN_NOTICE MTD_FORTUNET_PK "%s flash device at physically "
-				" address %x size %x\n",
-				map_regions[ix].map_info.name,
-				map_regions[ix].window_addr_physical,
-				map_regions[ix].map_info.size);
-
-			map_regions[ix].map_info.phys =	map_regions[ix].window_addr_physical,
-
-			map_regions[ix].map_info.virt =
-				ioremap_nocache(
-				map_regions[ix].window_addr_physical,
-				map_regions[ix].map_info.size);
-			if(!map_regions[ix].map_info.virt)
-			{
-				int j = 0;
-				printk(MTD_FORTUNET_PK "%s flash failed to ioremap!\n",
-					map_regions[ix].map_info.name);
-				for (j = 0 ; j < ix; j++)
-					iounmap(map_regions[j].map_info.virt);
-				return -ENXIO;
-			}
-			simple_map_init(&map_regions[ix].map_info);
-
-			printk(KERN_NOTICE MTD_FORTUNET_PK "%s flash is virtually at: %x\n",
-				map_regions[ix].map_info.name,
-				map_regions[ix].map_info.virt);
-			map_regions[ix].mymtd = do_map_probe("cfi_probe",
-				&map_regions[ix].map_info);
-			if((!map_regions[ix].mymtd)&&(
-				map_regions[ix].altbankwidth!=map_regions[ix].map_info.bankwidth))
-			{
-				printk(KERN_NOTICE MTD_FORTUNET_PK "Trying alternate bankwidth "
-					"for %s flash.\n",
-					map_regions[ix].map_info.name);
-				map_regions[ix].map_info.bankwidth =
-					map_regions[ix].altbankwidth;
-				map_regions[ix].mymtd = do_map_probe("cfi_probe",
-					&map_regions[ix].map_info);
-			}
-			map_regions[ix].mymtd->owner = THIS_MODULE;
-			add_mtd_partitions(map_regions[ix].mymtd,
-				map_regions[ix].parts,map_regions_parts[ix]);
-		}
-	}
-	if(iy)
-		return 0;
-	return -ENXIO;
-}
-
-static void __exit cleanup_fortunet(void)
-{
-	int	ix;
-	for(ix=0;ix<MAX_NUM_REGIONS;ix++)
-	{
-		if(map_regions_set[ix])
-		{
-			if( map_regions[ix].mymtd )
-			{
-				del_mtd_partitions( map_regions[ix].mymtd );
-				map_destroy( map_regions[ix].mymtd );
-			}
-			iounmap((void *)map_regions[ix].map_info.virt);
-		}
-	}
-}
-
-module_init(init_fortunet);
-module_exit(cleanup_fortunet);
-
-MODULE_AUTHOR("FortuNet, Inc.");
-MODULE_DESCRIPTION("MTD map driver for FortuNet boards");
diff --git a/drivers/mtd/maps/gpio-addr-flash.c b/drivers/mtd/maps/gpio-addr-flash.c
index 32e89d773b4..a4c477b9fdd 100644
--- a/drivers/mtd/maps/gpio-addr-flash.c
+++ b/drivers/mtd/maps/gpio-addr-flash.c
@@ -14,7 +14,6 @@
  */
 
 #include <linux/gpio.h>
-#include <linux/init.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -26,7 +25,8 @@
 #include <linux/slab.h>
 #include <linux/types.h>
 
-#define pr_devinit(fmt, args...) ({ static const __devinitconst char __fmt[] = fmt; printk(__fmt, ## args); })
+#define pr_devinit(fmt, args...) \
+	({ static const char __fmt[] = fmt; printk(__fmt, ## args); })
 
 #define DRIVER_NAME "gpio-addr-flash"
 #define PFX DRIVER_NAME ": "
@@ -142,7 +142,8 @@ static void gf_write(struct map_info *map, map_word d1, unsigned long ofs)
  *
  * See gf_copy_from() caveat.
  */
-static void gf_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+static void gf_copy_to(struct map_info *map, unsigned long to,
+		       const void *from, ssize_t len)
 {
 	struct async_state *state = gf_map_info_to_state(map);
 
@@ -155,9 +156,8 @@ static void gf_copy_to(struct map_info *map, unsigned long to, const void *from,
 	memcpy_toio(map->virt + (to % state->win_size), from, len);
 }
 
-#ifdef CONFIG_MTD_PARTITIONS
-static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
-#endif
+static const char * const part_probe_types[] = {
+	"cmdlinepart", "RedBoot", NULL };
 
 /**
  * gpio_flash_probe() - setup a mapping for a GPIO assisted flash
@@ -187,16 +187,15 @@ static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
  *	...
  * };
  */
-static int __devinit gpio_flash_probe(struct platform_device *pdev)
+static int gpio_flash_probe(struct platform_device *pdev)
 {
-	int ret;
 	size_t i, arr_size;
 	struct physmap_flash_data *pdata;
 	struct resource *memory;
 	struct resource *gpios;
 	struct async_state *state;
 
-	pdata = pdev->dev.platform_data;
+	pdata = dev_get_platdata(&pdev->dev);
 	memory = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	gpios = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 
@@ -208,10 +207,14 @@ static int __devinit gpio_flash_probe(struct platform_device *pdev)
 	if (!state)
 		return -ENOMEM;
 
+	/*
+	 * We cast start/end to known types in the boards file, so cast
+	 * away their pointer types here to the known types (gpios->xxx).
+	 */
 	state->gpio_count     = gpios->end;
-	state->gpio_addrs     = (void *)gpios->start;
+	state->gpio_addrs     = (void *)(unsigned long)gpios->start;
 	state->gpio_values    = (void *)(state + 1);
-	state->win_size       = memory->end - memory->start + 1;
+	state->win_size       = resource_size(memory);
 	memset(state->gpio_values, 0xff, arr_size);
 
 	state->map.name       = DRIVER_NAME;
@@ -221,7 +224,7 @@ static int __devinit gpio_flash_probe(struct platform_device *pdev)
 	state->map.copy_to    = gf_copy_to;
 	state->map.bankwidth  = pdata->width;
 	state->map.size       = state->win_size * (1 << state->gpio_count);
-	state->map.virt       = (void __iomem *)memory->start;
+	state->map.virt       = ioremap_nocache(memory->start, state->map.size);
 	state->map.phys       = NO_XIP;
 	state->map.map_priv_1 = (unsigned long)state;
 
@@ -250,37 +253,21 @@ static int __devinit gpio_flash_probe(struct platform_device *pdev)
 		return -ENXIO;
 	}
 
-#ifdef CONFIG_MTD_PARTITIONS
-	ret = parse_mtd_partitions(state->mtd, part_probe_types, &pdata->parts, 0);
-	if (ret > 0) {
-		pr_devinit(KERN_NOTICE PFX "Using commandline partition definition\n");
-		add_mtd_partitions(state->mtd, pdata->parts, ret);
-		kfree(pdata->parts);
-
-	} else if (pdata->nr_parts) {
-		pr_devinit(KERN_NOTICE PFX "Using board partition definition\n");
-		add_mtd_partitions(state->mtd, pdata->parts, pdata->nr_parts);
-
-	} else
-#endif
-	{
-		pr_devinit(KERN_NOTICE PFX "no partition info available, registering whole flash at once\n");
-		add_mtd_device(state->mtd);
-	}
+
+	mtd_device_parse_register(state->mtd, part_probe_types, NULL,
+				  pdata->parts, pdata->nr_parts);
 
 	return 0;
 }
 
-static int __devexit gpio_flash_remove(struct platform_device *pdev)
+static int gpio_flash_remove(struct platform_device *pdev)
 {
 	struct async_state *state = platform_get_drvdata(pdev);
 	size_t i = 0;
 	do {
 		gpio_free(state->gpio_addrs[i]);
 	} while (++i < state->gpio_count);
-#ifdef CONFIG_MTD_PARTITIONS
-	del_mtd_partitions(state->mtd);
-#endif
+	mtd_device_unregister(state->mtd);
 	map_destroy(state->mtd);
 	kfree(state);
 	return 0;
@@ -288,23 +275,13 @@ static int __devexit gpio_flash_remove(struct platform_device *pdev)
 
 static struct platform_driver gpio_flash_driver = {
 	.probe		= gpio_flash_probe,
-	.remove		= __devexit_p(gpio_flash_remove),
+	.remove		= gpio_flash_remove,
 	.driver		= {
 		.name	= DRIVER_NAME,
 	},
 };
 
-static int __init gpio_flash_init(void)
-{
-	return platform_driver_register(&gpio_flash_driver);
-}
-module_init(gpio_flash_init);
-
-static void __exit gpio_flash_exit(void)
-{
-	platform_driver_unregister(&gpio_flash_driver);
-}
-module_exit(gpio_flash_exit);
+module_platform_driver(gpio_flash_driver);
 
 MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>");
 MODULE_DESCRIPTION("MTD map driver for flashes addressed physically and with gpios");
diff --git a/drivers/mtd/maps/h720x-flash.c b/drivers/mtd/maps/h720x-flash.c
deleted file mode 100644
index 72c724fa8c2..00000000000
--- a/drivers/mtd/maps/h720x-flash.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Flash memory access on Hynix GMS30C7201/HMS30C7202 based
- * evaluation boards
- *
- * (C) 2002 Jungjun Kim <jungjun.kim@hynix.com>
- *     2003 Thomas Gleixner <tglx@linutronix.de>
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <mach/hardware.h>
-#include <asm/io.h>
-
-static struct mtd_info *mymtd;
-
-static struct map_info h720x_map = {
-	.name =		"H720X",
-	.bankwidth =	4,
-	.size =		H720X_FLASH_SIZE,
-	.phys =		H720X_FLASH_PHYS,
-};
-
-static struct mtd_partition h720x_partitions[] = {
-        {
-                .name = "ArMon",
-                .size = 0x00080000,
-                .offset = 0,
-                .mask_flags = MTD_WRITEABLE
-        },{
-                .name = "Env",
-                .size = 0x00040000,
-                .offset = 0x00080000,
-                .mask_flags = MTD_WRITEABLE
-        },{
-                .name = "Kernel",
-                .size = 0x00180000,
-                .offset = 0x000c0000,
-                .mask_flags = MTD_WRITEABLE
-        },{
-                .name = "Ramdisk",
-                .size = 0x00400000,
-                .offset = 0x00240000,
-                .mask_flags = MTD_WRITEABLE
-        },{
-                .name = "jffs2",
-                .size = MTDPART_SIZ_FULL,
-                .offset = MTDPART_OFS_APPEND
-        }
-};
-
-#define NUM_PARTITIONS ARRAY_SIZE(h720x_partitions)
-
-static int                   nr_mtd_parts;
-static struct mtd_partition *mtd_parts;
-static const char *probes[] = { "cmdlinepart", NULL };
-
-/*
- * Initialize FLASH support
- */
-static int __init h720x_mtd_init(void)
-{
-
-	char	*part_type = NULL;
-
-	h720x_map.virt = ioremap(h720x_map.phys, h720x_map.size);
-
-	if (!h720x_map.virt) {
-		printk(KERN_ERR "H720x-MTD: ioremap failed\n");
-		return -EIO;
-	}
-
-	simple_map_init(&h720x_map);
-
-	// Probe for flash bankwidth 4
-	printk (KERN_INFO "H720x-MTD probing 32bit FLASH\n");
-	mymtd = do_map_probe("cfi_probe", &h720x_map);
-	if (!mymtd) {
-		printk (KERN_INFO "H720x-MTD probing 16bit FLASH\n");
-	    // Probe for bankwidth 2
-	    h720x_map.bankwidth = 2;
-	    mymtd = do_map_probe("cfi_probe", &h720x_map);
-	}
-
-	if (mymtd) {
-		mymtd->owner = THIS_MODULE;
-
-#ifdef CONFIG_MTD_PARTITIONS
-		nr_mtd_parts = parse_mtd_partitions(mymtd, probes, &mtd_parts, 0);
-		if (nr_mtd_parts > 0)
-			part_type = "command line";
-#endif
-		if (nr_mtd_parts <= 0) {
-			mtd_parts = h720x_partitions;
-			nr_mtd_parts = NUM_PARTITIONS;
-			part_type = "builtin";
-		}
-		printk(KERN_INFO "Using %s partition table\n", part_type);
-		add_mtd_partitions(mymtd, mtd_parts, nr_mtd_parts);
-		return 0;
-	}
-
-	iounmap((void *)h720x_map.virt);
-	return -ENXIO;
-}
-
-/*
- * Cleanup
- */
-static void __exit h720x_mtd_cleanup(void)
-{
-
-	if (mymtd) {
-		del_mtd_partitions(mymtd);
-		map_destroy(mymtd);
-	}
-
-	/* Free partition info, if commandline partition was used */
-	if (mtd_parts && (mtd_parts != h720x_partitions))
-		kfree (mtd_parts);
-
-	if (h720x_map.virt) {
-		iounmap((void *)h720x_map.virt);
-		h720x_map.virt = 0;
-	}
-}
-
-
-module_init(h720x_mtd_init);
-module_exit(h720x_mtd_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Thomas Gleixner <tglx@linutronix.de>");
-MODULE_DESCRIPTION("MTD map driver for Hynix evaluation boards");
diff --git a/drivers/mtd/maps/ichxrom.c b/drivers/mtd/maps/ichxrom.c
index f102bf243a7..c7478e18f48 100644
--- a/drivers/mtd/maps/ichxrom.c
+++ b/drivers/mtd/maps/ichxrom.c
@@ -67,7 +67,7 @@ static void ichxrom_cleanup(struct ichxrom_window *window)
 	list_for_each_entry_safe(map, scratch, &window->maps, list) {
 		if (map->rsrc.parent)
 			release_resource(&map->rsrc);
-		del_mtd_device(map->mtd);
+		mtd_device_unregister(map->mtd);
 		map_destroy(map->mtd);
 		list_del(&map->list);
 		kfree(map);
@@ -84,8 +84,8 @@ static void ichxrom_cleanup(struct ichxrom_window *window)
 }
 
 
-static int __devinit ichxrom_init_one (struct pci_dev *pdev,
-	const struct pci_device_id *ent)
+static int ichxrom_init_one(struct pci_dev *pdev,
+			    const struct pci_device_id *ent)
 {
 	static char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL };
 	struct ichxrom_window *window = &ichxrom_window;
@@ -175,12 +175,9 @@ static int __devinit ichxrom_init_one (struct pci_dev *pdev,
 	window->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
 	if (request_resource(&iomem_resource, &window->rsrc)) {
 		window->rsrc.parent = NULL;
-		printk(KERN_DEBUG MOD_NAME
-			": %s(): Unable to register resource"
-			" 0x%.16llx-0x%.16llx - kernel bug?\n",
-			__func__,
-			(unsigned long long)window->rsrc.start,
-			(unsigned long long)window->rsrc.end);
+		printk(KERN_DEBUG MOD_NAME ": "
+		       "%s(): Unable to register resource %pR - kernel bug?\n",
+		       __func__, &window->rsrc);
 	}
 
 	/* Map the firmware hub into my address space. */
@@ -290,7 +287,7 @@ static int __devinit ichxrom_init_one (struct pci_dev *pdev,
 
 		/* Now that the mtd devices is complete claim and export it */
 		map->mtd->owner = THIS_MODULE;
-		if (add_mtd_device(map->mtd)) {
+		if (mtd_device_register(map->mtd, NULL, 0)) {
 			map_destroy(map->mtd);
 			map->mtd = NULL;
 			goto out;
@@ -318,13 +315,13 @@ static int __devinit ichxrom_init_one (struct pci_dev *pdev,
 }
 
 
-static void __devexit ichxrom_remove_one (struct pci_dev *pdev)
+static void ichxrom_remove_one(struct pci_dev *pdev)
 {
 	struct ichxrom_window *window = &ichxrom_window;
 	ichxrom_cleanup(window);
 }
 
-static struct pci_device_id ichxrom_pci_tbl[] __devinitdata = {
+static struct pci_device_id ichxrom_pci_tbl[] = {
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0,
 	  PCI_ANY_ID, PCI_ANY_ID, },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0,
diff --git a/drivers/mtd/maps/impa7.c b/drivers/mtd/maps/impa7.c
index 998a27da97f..15bbda03be6 100644
--- a/drivers/mtd/maps/impa7.c
+++ b/drivers/mtd/maps/impa7.c
@@ -15,10 +15,7 @@
 #include <asm/io.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
-
-#ifdef CONFIG_MTD_PARTITIONS
 #include <linux/mtd/partitions.h>
-#endif
 
 #define WINDOW_ADDR0 0x00000000      /* physical properties of flash */
 #define WINDOW_SIZE0 0x00800000
@@ -27,14 +24,12 @@
 #define NUM_FLASHBANKS 2
 #define BUSWIDTH     4
 
-/* can be { "cfi_probe", "jedec_probe", "map_rom", NULL } */
-#define PROBETYPES { "jedec_probe", NULL }
-
 #define MSG_PREFIX "impA7:"   /* prefix for our printk()'s */
 #define MTDID      "impa7-%d"  /* for mtdparts= partitioning */
 
 static struct mtd_info *impa7_mtd[NUM_FLASHBANKS];
 
+static const char * const rom_probe_types[] = { "jedec_probe", NULL };
 
 static struct map_info impa7_map[NUM_FLASHBANKS] = {
 	{
@@ -49,12 +44,10 @@ static struct map_info impa7_map[NUM_FLASHBANKS] = {
 	},
 };
 
-#ifdef CONFIG_MTD_PARTITIONS
-
 /*
  * MTD partitioning stuff
  */
-static struct mtd_partition static_partitions[] =
+static struct mtd_partition partitions[] =
 {
 	{
 		.name = "FileSystem",
@@ -63,18 +56,9 @@ static struct mtd_partition static_partitions[] =
 	},
 };
 
-static int mtd_parts_nb[NUM_FLASHBANKS];
-static struct mtd_partition *mtd_parts[NUM_FLASHBANKS];
-
-#endif
-
-static const char *probes[] = { "cmdlinepart", NULL };
-
 static int __init init_impa7(void)
 {
-	static const char *rom_probe_types[] = PROBETYPES;
-	const char **type;
-	const char *part_type = 0;
+	const char * const *type;
 	int i;
 	static struct { u_long addr; u_long size; } pt[NUM_FLASHBANKS] = {
 	  { WINDOW_ADDR0, WINDOW_SIZE0 },
@@ -95,7 +79,7 @@ static int __init init_impa7(void)
 		}
 		simple_map_init(&impa7_map[i]);
 
-		impa7_mtd[i] = 0;
+		impa7_mtd[i] = NULL;
 		type = rom_probe_types;
 		for(; !impa7_mtd[i] && *type; type++) {
 			impa7_mtd[i] = do_map_probe(*type, &impa7_map[i]);
@@ -104,31 +88,12 @@ static int __init init_impa7(void)
 		if (impa7_mtd[i]) {
 			impa7_mtd[i]->owner = THIS_MODULE;
 			devicesfound++;
-#ifdef CONFIG_MTD_PARTITIONS
-			mtd_parts_nb[i] = parse_mtd_partitions(impa7_mtd[i],
-							       probes,
-							       &mtd_parts[i],
-							       0);
-			if (mtd_parts_nb[i] > 0) {
-				part_type = "command line";
-			} else {
-				mtd_parts[i] = static_partitions;
-				mtd_parts_nb[i] = ARRAY_SIZE(static_partitions);
-				part_type = "static";
-			}
-
-			printk(KERN_NOTICE MSG_PREFIX
-			       "using %s partition definition\n",
-			       part_type);
-			add_mtd_partitions(impa7_mtd[i],
-					   mtd_parts[i], mtd_parts_nb[i]);
-#else
-			add_mtd_device(impa7_mtd[i]);
-
-#endif
+			mtd_device_parse_register(impa7_mtd[i], NULL, NULL,
+						  partitions,
+						  ARRAY_SIZE(partitions));
+		} else {
+			iounmap((void __iomem *)impa7_map[i].virt);
 		}
-		else
-			iounmap((void *)impa7_map[i].virt);
 	}
 	return devicesfound == 0 ? -ENXIO : 0;
 }
@@ -138,14 +103,10 @@ static void __exit cleanup_impa7(void)
 	int i;
 	for (i=0; i<NUM_FLASHBANKS; i++) {
 		if (impa7_mtd[i]) {
-#ifdef CONFIG_MTD_PARTITIONS
-			del_mtd_partitions(impa7_mtd[i]);
-#else
-			del_mtd_device(impa7_mtd[i]);
-#endif
+			mtd_device_unregister(impa7_mtd[i]);
 			map_destroy(impa7_mtd[i]);
-			iounmap((void *)impa7_map[i].virt);
-			impa7_map[i].virt = 0;
+			iounmap((void __iomem *)impa7_map[i].virt);
+			impa7_map[i].virt = NULL;
 		}
 	}
 }
diff --git a/drivers/mtd/maps/integrator-flash.c b/drivers/mtd/maps/integrator-flash.c
deleted file mode 100644
index 2aac41bde8b..00000000000
--- a/drivers/mtd/maps/integrator-flash.c
+++ /dev/null
@@ -1,319 +0,0 @@
-/*======================================================================
-
-    drivers/mtd/maps/integrator-flash.c: ARM Integrator flash map driver
-
-    Copyright (C) 2000 ARM Limited
-    Copyright (C) 2003 Deep Blue Solutions Ltd.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-
-   This is access code for flashes using ARM's flash partitioning
-   standards.
-
-======================================================================*/
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/concat.h>
-
-#include <asm/mach/flash.h>
-#include <mach/hardware.h>
-#include <asm/system.h>
-
-struct armflash_subdev_info {
-	char			*name;
-	struct mtd_info		*mtd;
-	struct map_info		map;
-	struct flash_platform_data *plat;
-};
-
-struct armflash_info {
-	struct resource		*res;
-	struct mtd_partition	*parts;
-	struct mtd_info		*mtd;
-	int			nr_subdev;
-	struct armflash_subdev_info subdev[0];
-};
-
-static void armflash_set_vpp(struct map_info *map, int on)
-{
-	struct armflash_subdev_info *info =
-		container_of(map, struct armflash_subdev_info, map);
-
-	if (info->plat && info->plat->set_vpp)
-		info->plat->set_vpp(on);
-}
-
-static const char *probes[] = { "cmdlinepart", "RedBoot", "afs", NULL };
-
-static int armflash_subdev_probe(struct armflash_subdev_info *subdev,
-				 struct resource *res)
-{
-	struct flash_platform_data *plat = subdev->plat;
-	resource_size_t size = res->end - res->start + 1;
-	void __iomem *base;
-	int err = 0;
-
-	if (!request_mem_region(res->start, size, subdev->name)) {
-		err = -EBUSY;
-		goto out;
-	}
-
-	base = ioremap(res->start, size);
-	if (!base) {
-		err = -ENOMEM;
-		goto no_mem;
-	}
-
-	/*
-	 * look for CFI based flash parts fitted to this board
-	 */
-	subdev->map.size	= size;
-	subdev->map.bankwidth	= plat->width;
-	subdev->map.phys	= res->start;
-	subdev->map.virt	= base;
-	subdev->map.name	= subdev->name;
-	subdev->map.set_vpp	= armflash_set_vpp;
-
-	simple_map_init(&subdev->map);
-
-	/*
-	 * Also, the CFI layer automatically works out what size
-	 * of chips we have, and does the necessary identification
-	 * for us automatically.
-	 */
-	subdev->mtd = do_map_probe(plat->map_name, &subdev->map);
-	if (!subdev->mtd) {
-		err = -ENXIO;
-		goto no_device;
-	}
-
-	subdev->mtd->owner = THIS_MODULE;
-
-	/* Successful? */
-	if (err == 0)
-		return err;
-
-	if (subdev->mtd)
-		map_destroy(subdev->mtd);
- no_device:
-	iounmap(base);
- no_mem:
-	release_mem_region(res->start, size);
- out:
-	return err;
-}
-
-static void armflash_subdev_remove(struct armflash_subdev_info *subdev)
-{
-	if (subdev->mtd)
-		map_destroy(subdev->mtd);
-	if (subdev->map.virt)
-		iounmap(subdev->map.virt);
-	kfree(subdev->name);
-	subdev->name = NULL;
-	release_mem_region(subdev->map.phys, subdev->map.size);
-}
-
-static int armflash_probe(struct platform_device *dev)
-{
-	struct flash_platform_data *plat = dev->dev.platform_data;
-	unsigned int size;
-	struct armflash_info *info;
-	int i, nr, err;
-
-	/* Count the number of devices */
-	for (nr = 0; ; nr++)
-		if (!platform_get_resource(dev, IORESOURCE_MEM, nr))
-			break;
-	if (nr == 0) {
-		err = -ENODEV;
-		goto out;
-	}
-
-	size = sizeof(struct armflash_info) +
-		sizeof(struct armflash_subdev_info) * nr;
-	info = kzalloc(size, GFP_KERNEL);
-	if (!info) {
-		err = -ENOMEM;
-		goto out;
-	}
-
-	if (plat && plat->init) {
-		err = plat->init();
-		if (err)
-			goto no_resource;
-	}
-
-	for (i = 0; i < nr; i++) {
-		struct armflash_subdev_info *subdev = &info->subdev[i];
-		struct resource *res;
-
-		res = platform_get_resource(dev, IORESOURCE_MEM, i);
-		if (!res)
-			break;
-
-		if (nr == 1)
-			/* No MTD concatenation, just use the default name */
-			subdev->name = kstrdup(dev_name(&dev->dev), GFP_KERNEL);
-		else
-			subdev->name = kasprintf(GFP_KERNEL, "%s-%d",
-						 dev_name(&dev->dev), i);
-		if (!subdev->name) {
-			err = -ENOMEM;
-			break;
-		}
-		subdev->plat = plat;
-
-		err = armflash_subdev_probe(subdev, res);
-		if (err) {
-			kfree(subdev->name);
-			subdev->name = NULL;
-			break;
-		}
-	}
-	info->nr_subdev = i;
-
-	if (err)
-		goto subdev_err;
-
-	if (info->nr_subdev == 1)
-		info->mtd = info->subdev[0].mtd;
-	else if (info->nr_subdev > 1) {
-#ifdef CONFIG_MTD_CONCAT
-		struct mtd_info *cdev[info->nr_subdev];
-
-		/*
-		 * We detected multiple devices.  Concatenate them together.
-		 */
-		for (i = 0; i < info->nr_subdev; i++)
-			cdev[i] = info->subdev[i].mtd;
-
-		info->mtd = mtd_concat_create(cdev, info->nr_subdev,
-					      dev_name(&dev->dev));
-		if (info->mtd == NULL)
-			err = -ENXIO;
-#else
-		printk(KERN_ERR "armflash: multiple devices found but "
-		       "MTD concat support disabled.\n");
-		err = -ENXIO;
-#endif
-	}
-
-	if (err < 0)
-		goto cleanup;
-
-	err = parse_mtd_partitions(info->mtd, probes, &info->parts, 0);
-	if (err > 0) {
-		err = add_mtd_partitions(info->mtd, info->parts, err);
-		if (err)
-			printk(KERN_ERR
-			       "mtd partition registration failed: %d\n", err);
-	}
-
-	if (err == 0) {
-		platform_set_drvdata(dev, info);
-		return err;
-	}
-
-	/*
-	 * We got an error, free all resources.
-	 */
- cleanup:
-	if (info->mtd) {
-		del_mtd_partitions(info->mtd);
-#ifdef CONFIG_MTD_CONCAT
-		if (info->mtd != info->subdev[0].mtd)
-			mtd_concat_destroy(info->mtd);
-#endif
-	}
-	kfree(info->parts);
- subdev_err:
-	for (i = info->nr_subdev - 1; i >= 0; i--)
-		armflash_subdev_remove(&info->subdev[i]);
- no_resource:
-	if (plat && plat->exit)
-		plat->exit();
-	kfree(info);
- out:
-	return err;
-}
-
-static int armflash_remove(struct platform_device *dev)
-{
-	struct armflash_info *info = platform_get_drvdata(dev);
-	struct flash_platform_data *plat = dev->dev.platform_data;
-	int i;
-
-	platform_set_drvdata(dev, NULL);
-
-	if (info) {
-		if (info->mtd) {
-			del_mtd_partitions(info->mtd);
-#ifdef CONFIG_MTD_CONCAT
-			if (info->mtd != info->subdev[0].mtd)
-				mtd_concat_destroy(info->mtd);
-#endif
-		}
-		kfree(info->parts);
-
-		for (i = info->nr_subdev - 1; i >= 0; i--)
-			armflash_subdev_remove(&info->subdev[i]);
-
-		if (plat && plat->exit)
-			plat->exit();
-
-		kfree(info);
-	}
-
-	return 0;
-}
-
-static struct platform_driver armflash_driver = {
-	.probe		= armflash_probe,
-	.remove		= armflash_remove,
-	.driver		= {
-		.name	= "armflash",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init armflash_init(void)
-{
-	return platform_driver_register(&armflash_driver);
-}
-
-static void __exit armflash_exit(void)
-{
-	platform_driver_unregister(&armflash_driver);
-}
-
-module_init(armflash_init);
-module_exit(armflash_exit);
-
-MODULE_AUTHOR("ARM Ltd");
-MODULE_DESCRIPTION("ARM Integrator CFI map driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:armflash");
diff --git a/drivers/mtd/maps/intel_vr_nor.c b/drivers/mtd/maps/intel_vr_nor.c
index fc1998512eb..5ab71f0e1bc 100644
--- a/drivers/mtd/maps/intel_vr_nor.c
+++ b/drivers/mtd/maps/intel_vr_nor.c
@@ -31,7 +31,6 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/pci.h>
-#include <linux/init.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
@@ -44,7 +43,6 @@ struct vr_nor_mtd {
 	void __iomem *csr_base;
 	struct map_info map;
 	struct mtd_info *info;
-	int nr_parts;
 	struct pci_dev *dev;
 };
 
@@ -64,47 +62,28 @@ struct vr_nor_mtd {
 #define TIMING_BYTE_EN		(1 <<  0)	/* 8-bit vs 16-bit bus */
 #define TIMING_MASK		0x3FFF0000
 
-static void __devexit vr_nor_destroy_partitions(struct vr_nor_mtd *p)
+static void vr_nor_destroy_partitions(struct vr_nor_mtd *p)
 {
-	if (p->nr_parts > 0) {
-#if defined(CONFIG_MTD_PARTITIONS) || defined(CONFIG_MTD_PARTITIONS_MODULE)
-		del_mtd_partitions(p->info);
-#endif
-	} else
-		del_mtd_device(p->info);
+	mtd_device_unregister(p->info);
 }
 
-static int __devinit vr_nor_init_partitions(struct vr_nor_mtd *p)
+static int vr_nor_init_partitions(struct vr_nor_mtd *p)
 {
-	int err = 0;
-#if defined(CONFIG_MTD_PARTITIONS) || defined(CONFIG_MTD_PARTITIONS_MODULE)
-	struct mtd_partition *parts;
-	static const char *part_probes[] = { "cmdlinepart", NULL };
-#endif
-
 	/* register the flash bank */
-#if defined(CONFIG_MTD_PARTITIONS) || defined(CONFIG_MTD_PARTITIONS_MODULE)
 	/* partition the flash bank */
-	p->nr_parts = parse_mtd_partitions(p->info, part_probes, &parts, 0);
-	if (p->nr_parts > 0)
-		err = add_mtd_partitions(p->info, parts, p->nr_parts);
-#endif
-	if (p->nr_parts <= 0)
-		err = add_mtd_device(p->info);
-
-	return err;
+	return mtd_device_parse_register(p->info, NULL, NULL, NULL, 0);
 }
 
-static void __devexit vr_nor_destroy_mtd_setup(struct vr_nor_mtd *p)
+static void vr_nor_destroy_mtd_setup(struct vr_nor_mtd *p)
 {
 	map_destroy(p->info);
 }
 
-static int __devinit vr_nor_mtd_setup(struct vr_nor_mtd *p)
+static int vr_nor_mtd_setup(struct vr_nor_mtd *p)
 {
-	static const char *probe_types[] =
+	static const char * const probe_types[] =
 	    { "cfi_probe", "jedec_probe", NULL };
-	const char **type;
+	const char * const *type;
 
 	for (type = probe_types; !p->info && *type; type++)
 		p->info = do_map_probe(*type, &p->map);
@@ -116,7 +95,7 @@ static int __devinit vr_nor_mtd_setup(struct vr_nor_mtd *p)
 	return 0;
 }
 
-static void __devexit vr_nor_destroy_maps(struct vr_nor_mtd *p)
+static void vr_nor_destroy_maps(struct vr_nor_mtd *p)
 {
 	unsigned int exp_timing_cs0;
 
@@ -136,7 +115,7 @@ static void __devexit vr_nor_destroy_maps(struct vr_nor_mtd *p)
  * Initialize the map_info structure and map the flash.
  * Returns 0 on success, nonzero otherwise.
  */
-static int __devinit vr_nor_init_maps(struct vr_nor_mtd *p)
+static int vr_nor_init_maps(struct vr_nor_mtd *p)
 {
 	unsigned long csr_phys, csr_len;
 	unsigned long win_phys, win_len;
@@ -196,11 +175,10 @@ static struct pci_device_id vr_nor_pci_ids[] = {
 	{0,}
 };
 
-static void __devexit vr_nor_pci_remove(struct pci_dev *dev)
+static void vr_nor_pci_remove(struct pci_dev *dev)
 {
 	struct vr_nor_mtd *p = pci_get_drvdata(dev);
 
-	pci_set_drvdata(dev, NULL);
 	vr_nor_destroy_partitions(p);
 	vr_nor_destroy_mtd_setup(p);
 	vr_nor_destroy_maps(p);
@@ -209,8 +187,7 @@ static void __devexit vr_nor_pci_remove(struct pci_dev *dev)
 	pci_disable_device(dev);
 }
 
-static int __devinit
-vr_nor_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+static int vr_nor_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	struct vr_nor_mtd *p = NULL;
 	unsigned int exp_timing_cs0;
@@ -276,22 +253,11 @@ vr_nor_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 static struct pci_driver vr_nor_pci_driver = {
 	.name = DRV_NAME,
 	.probe = vr_nor_pci_probe,
-	.remove = __devexit_p(vr_nor_pci_remove),
+	.remove = vr_nor_pci_remove,
 	.id_table = vr_nor_pci_ids,
 };
 
-static int __init vr_nor_mtd_init(void)
-{
-	return pci_register_driver(&vr_nor_pci_driver);
-}
-
-static void __exit vr_nor_mtd_exit(void)
-{
-	pci_unregister_driver(&vr_nor_pci_driver);
-}
-
-module_init(vr_nor_mtd_init);
-module_exit(vr_nor_mtd_exit);
+module_pci_driver(vr_nor_pci_driver);
 
 MODULE_AUTHOR("Andy Lowe");
 MODULE_DESCRIPTION("MTD map driver for NOR flash on Intel Vermilion Range");
diff --git a/drivers/mtd/maps/ixp2000.c b/drivers/mtd/maps/ixp2000.c
deleted file mode 100644
index 9639d83a9d6..00000000000
--- a/drivers/mtd/maps/ixp2000.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * drivers/mtd/maps/ixp2000.c
- *
- * Mapping for the Intel XScale IXP2000 based systems
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-#include <mach/hardware.h>
-#include <asm/mach/flash.h>
-
-#include <linux/reboot.h>
-
-struct ixp2000_flash_info {
-	struct		mtd_info *mtd;
-	struct		map_info map;
-	struct		mtd_partition *partitions;
-	struct		resource *res;
-};
-
-static inline unsigned long flash_bank_setup(struct map_info *map, unsigned long ofs)
-{
-	unsigned long (*set_bank)(unsigned long) =
-		(unsigned long(*)(unsigned long))map->map_priv_2;
-
-	return (set_bank ? set_bank(ofs) : ofs);
-}
-
-#ifdef __ARMEB__
-/*
- * Rev A0 and A1 of IXP2400 silicon have a broken addressing unit which
- * causes the lower address bits to be XORed with 0x11 on 8 bit accesses
- * and XORed with 0x10 on 16 bit accesses. See the spec update, erratum 44.
- */
-static int erratum44_workaround = 0;
-
-static inline unsigned long address_fix8_write(unsigned long addr)
-{
-	if (erratum44_workaround) {
-		return (addr ^ 3);
-	}
-	return addr;
-}
-#else
-
-#define address_fix8_write(x)	(x)
-#endif
-
-static map_word ixp2000_flash_read8(struct map_info *map, unsigned long ofs)
-{
-	map_word val;
-
-	val.x[0] =  *((u8 *)(map->map_priv_1 + flash_bank_setup(map, ofs)));
-	return val;
-}
-
-/*
- * We can't use the standard memcpy due to the broken SlowPort
- * address translation on rev A0 and A1 silicon and the fact that
- * we have banked flash.
- */
-static void ixp2000_flash_copy_from(struct map_info *map, void *to,
-			      unsigned long from, ssize_t len)
-{
-	from = flash_bank_setup(map, from);
-	while(len--)
-		*(__u8 *) to++ = *(__u8 *)(map->map_priv_1 + from++);
-}
-
-static void ixp2000_flash_write8(struct map_info *map, map_word d, unsigned long ofs)
-{
-	*(__u8 *) (address_fix8_write(map->map_priv_1 +
-				      flash_bank_setup(map, ofs))) = d.x[0];
-}
-
-static void ixp2000_flash_copy_to(struct map_info *map, unsigned long to,
-			    const void *from, ssize_t len)
-{
-	to = flash_bank_setup(map, to);
-	while(len--) {
-		unsigned long tmp = address_fix8_write(map->map_priv_1 + to++);
-		*(__u8 *)(tmp) = *(__u8 *)(from++);
-	}
-}
-
-
-static int ixp2000_flash_remove(struct platform_device *dev)
-{
-	struct flash_platform_data *plat = dev->dev.platform_data;
-	struct ixp2000_flash_info *info = platform_get_drvdata(dev);
-
-	platform_set_drvdata(dev, NULL);
-
-	if(!info)
-		return 0;
-
-	if (info->mtd) {
-		del_mtd_partitions(info->mtd);
-		map_destroy(info->mtd);
-	}
-	if (info->map.map_priv_1)
-		iounmap((void *) info->map.map_priv_1);
-
-	kfree(info->partitions);
-
-	if (info->res) {
-		release_resource(info->res);
-		kfree(info->res);
-	}
-
-	if (plat->exit)
-		plat->exit();
-
-	return 0;
-}
-
-
-static int ixp2000_flash_probe(struct platform_device *dev)
-{
-	static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
-	struct ixp2000_flash_data *ixp_data = dev->dev.platform_data;
-	struct flash_platform_data *plat;
-	struct ixp2000_flash_info *info;
-	unsigned long window_size;
-	int err = -1;
-
-	if (!ixp_data)
-		return -ENODEV;
-
-	plat = ixp_data->platform_data;
-	if (!plat)
-		return -ENODEV;
-
-	window_size = dev->resource->end - dev->resource->start + 1;
-	dev_info(&dev->dev, "Probe of IXP2000 flash(%d banks x %dMiB)\n",
-		 ixp_data->nr_banks, ((u32)window_size >> 20));
-
-	if (plat->width != 1) {
-		dev_err(&dev->dev, "IXP2000 MTD map only supports 8-bit mode, asking for %d\n",
-			plat->width * 8);
-		return -EIO;
-	}
-
-	info = kzalloc(sizeof(struct ixp2000_flash_info), GFP_KERNEL);
-	if(!info) {
-		err = -ENOMEM;
-		goto Error;
-	}
-
-	platform_set_drvdata(dev, info);
-
-	/*
-	 * Tell the MTD layer we're not 1:1 mapped so that it does
-	 * not attempt to do a direct access on us.
-	 */
-	info->map.phys = NO_XIP;
-
-	info->map.size = ixp_data->nr_banks * window_size;
-	info->map.bankwidth = 1;
-
-	/*
- 	 * map_priv_2 is used to store a ptr to the bank_setup routine
- 	 */
-	info->map.map_priv_2 = (unsigned long) ixp_data->bank_setup;
-
-	info->map.name = dev_name(&dev->dev);
-	info->map.read = ixp2000_flash_read8;
-	info->map.write = ixp2000_flash_write8;
-	info->map.copy_from = ixp2000_flash_copy_from;
-	info->map.copy_to = ixp2000_flash_copy_to;
-
-	info->res = request_mem_region(dev->resource->start,
-			dev->resource->end - dev->resource->start + 1,
-			dev_name(&dev->dev));
-	if (!info->res) {
-		dev_err(&dev->dev, "Could not reserve memory region\n");
-		err = -ENOMEM;
-		goto Error;
-	}
-
-	info->map.map_priv_1 = (unsigned long) ioremap(dev->resource->start,
-			    	dev->resource->end - dev->resource->start + 1);
-	if (!info->map.map_priv_1) {
-		dev_err(&dev->dev, "Failed to ioremap flash region\n");
-		err = -EIO;
-		goto Error;
-	}
-
-#if defined(__ARMEB__)
-	/*
-	 * Enable erratum 44 workaround for NPUs with broken slowport
-	 */
-
-	erratum44_workaround = ixp2000_has_broken_slowport();
-	dev_info(&dev->dev, "Erratum 44 workaround %s\n",
-	       erratum44_workaround ? "enabled" : "disabled");
-#endif
-
-	info->mtd = do_map_probe(plat->map_name, &info->map);
-	if (!info->mtd) {
-		dev_err(&dev->dev, "map_probe failed\n");
-		err = -ENXIO;
-		goto Error;
-	}
-	info->mtd->owner = THIS_MODULE;
-
-	err = parse_mtd_partitions(info->mtd, probes, &info->partitions, 0);
-	if (err > 0) {
-		err = add_mtd_partitions(info->mtd, info->partitions, err);
-		if(err)
-			dev_err(&dev->dev, "Could not parse partitions\n");
-	}
-
-	if (err)
-		goto Error;
-
-	return 0;
-
-Error:
-	ixp2000_flash_remove(dev);
-	return err;
-}
-
-static struct platform_driver ixp2000_flash_driver = {
-	.probe		= ixp2000_flash_probe,
-	.remove		= ixp2000_flash_remove,
-	.driver		= {
-		.name	= "IXP2000-Flash",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init ixp2000_flash_init(void)
-{
-	return platform_driver_register(&ixp2000_flash_driver);
-}
-
-static void __exit ixp2000_flash_exit(void)
-{
-	platform_driver_unregister(&ixp2000_flash_driver);
-}
-
-module_init(ixp2000_flash_init);
-module_exit(ixp2000_flash_exit);
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Deepak Saxena <dsaxena@plexity.net>");
-MODULE_ALIAS("platform:IXP2000-Flash");
diff --git a/drivers/mtd/maps/ixp4xx.c b/drivers/mtd/maps/ixp4xx.c
index e0a5e0426ea..6a589f1e288 100644
--- a/drivers/mtd/maps/ixp4xx.c
+++ b/drivers/mtd/maps/ixp4xx.c
@@ -13,9 +13,9 @@
  *
  */
 
+#include <linux/err.h>
 #include <linux/module.h>
 #include <linux/types.h>
-#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/slab.h>
@@ -118,7 +118,7 @@ static void ixp4xx_copy_from(struct map_info *map, void *to,
 		*dest++ = BYTE1(data);
 		src += 2;
 		len -= 2;
-        }
+	}
 
 	if (len > 0)
 		*dest++ = BYTE0(flash_read16(src));
@@ -145,35 +145,23 @@ static void ixp4xx_write16(struct map_info *map, map_word d, unsigned long adr)
 struct ixp4xx_flash_info {
 	struct mtd_info *mtd;
 	struct map_info map;
-	struct mtd_partition *partitions;
 	struct resource *res;
 };
 
-static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
+static const char * const probes[] = { "RedBoot", "cmdlinepart", NULL };
 
 static int ixp4xx_flash_remove(struct platform_device *dev)
 {
-	struct flash_platform_data *plat = dev->dev.platform_data;
+	struct flash_platform_data *plat = dev_get_platdata(&dev->dev);
 	struct ixp4xx_flash_info *info = platform_get_drvdata(dev);
 
-	platform_set_drvdata(dev, NULL);
-
 	if(!info)
 		return 0;
 
 	if (info->mtd) {
-		del_mtd_partitions(info->mtd);
+		mtd_device_unregister(info->mtd);
 		map_destroy(info->mtd);
 	}
-	if (info->map.virt)
-		iounmap(info->map.virt);
-
-	kfree(info->partitions);
-
-	if (info->res) {
-		release_resource(info->res);
-		kfree(info->res);
-	}
 
 	if (plat->exit)
 		plat->exit();
@@ -183,8 +171,11 @@ static int ixp4xx_flash_remove(struct platform_device *dev)
 
 static int ixp4xx_flash_probe(struct platform_device *dev)
 {
-	struct flash_platform_data *plat = dev->dev.platform_data;
+	struct flash_platform_data *plat = dev_get_platdata(&dev->dev);
 	struct ixp4xx_flash_info *info;
+	struct mtd_part_parser_data ppdata = {
+		.origin = dev->resource->start,
+	};
 	int err = -1;
 
 	if (!plat)
@@ -196,7 +187,8 @@ static int ixp4xx_flash_probe(struct platform_device *dev)
 			return err;
 	}
 
-	info = kzalloc(sizeof(struct ixp4xx_flash_info), GFP_KERNEL);
+	info = devm_kzalloc(&dev->dev, sizeof(struct ixp4xx_flash_info),
+			    GFP_KERNEL);
 	if(!info) {
 		err = -ENOMEM;
 		goto Error;
@@ -218,24 +210,13 @@ static int ixp4xx_flash_probe(struct platform_device *dev)
 	 */
 	info->map.bankwidth = 2;
 	info->map.name = dev_name(&dev->dev);
-	info->map.read = ixp4xx_read16,
-	info->map.write = ixp4xx_probe_write16,
-	info->map.copy_from = ixp4xx_copy_from,
-
-	info->res = request_mem_region(dev->resource->start,
-			resource_size(dev->resource),
-			"IXP4XXFlash");
-	if (!info->res) {
-		printk(KERN_ERR "IXP4XXFlash: Could not reserve memory region\n");
-		err = -ENOMEM;
-		goto Error;
-	}
+	info->map.read = ixp4xx_read16;
+	info->map.write = ixp4xx_probe_write16;
+	info->map.copy_from = ixp4xx_copy_from;
 
-	info->map.virt = ioremap(dev->resource->start,
-				 resource_size(dev->resource));
-	if (!info->map.virt) {
-		printk(KERN_ERR "IXP4XXFlash: Failed to ioremap region\n");
-		err = -EIO;
+	info->map.virt = devm_ioremap_resource(&dev->dev, dev->resource);
+	if (IS_ERR(info->map.virt)) {
+		err = PTR_ERR(info->map.virt);
 		goto Error;
 	}
 
@@ -248,17 +229,14 @@ static int ixp4xx_flash_probe(struct platform_device *dev)
 	info->mtd->owner = THIS_MODULE;
 
 	/* Use the fast version */
-	info->map.write = ixp4xx_write16,
-
-	err = parse_mtd_partitions(info->mtd, probes, &info->partitions, dev->resource->start);
-	if (err > 0) {
-		err = add_mtd_partitions(info->mtd, info->partitions, err);
-		if(err)
-			printk(KERN_ERR "Could not parse partitions\n");
-	}
+	info->map.write = ixp4xx_write16;
 
-	if (err)
+	err = mtd_device_parse_register(info->mtd, probes, &ppdata,
+			plat->parts, plat->nr_parts);
+	if (err) {
+		printk(KERN_ERR "Could not parse partitions\n");
 		goto Error;
+	}
 
 	return 0;
 
@@ -276,19 +254,7 @@ static struct platform_driver ixp4xx_flash_driver = {
 	},
 };
 
-static int __init ixp4xx_flash_init(void)
-{
-	return platform_driver_register(&ixp4xx_flash_driver);
-}
-
-static void __exit ixp4xx_flash_exit(void)
-{
-	platform_driver_unregister(&ixp4xx_flash_driver);
-}
-
-
-module_init(ixp4xx_flash_init);
-module_exit(ixp4xx_flash_exit);
+module_platform_driver(ixp4xx_flash_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("MTD map driver for Intel IXP4xx systems");
diff --git a/drivers/mtd/maps/l440gx.c b/drivers/mtd/maps/l440gx.c
index 9e054503c4c..74bd98ee635 100644
--- a/drivers/mtd/maps/l440gx.c
+++ b/drivers/mtd/maps/l440gx.c
@@ -27,17 +27,21 @@ static struct mtd_info *mymtd;
 
 
 /* Is this really the vpp port? */
+static DEFINE_SPINLOCK(l440gx_vpp_lock);
+static int l440gx_vpp_refcnt;
 static void l440gx_set_vpp(struct map_info *map, int vpp)
 {
-	unsigned long l;
+	unsigned long flags;
 
-	l = inl(VPP_PORT);
+	spin_lock_irqsave(&l440gx_vpp_lock, flags);
 	if (vpp) {
-		l |= 1;
+		if (++l440gx_vpp_refcnt == 1)   /* first nested 'on' */
+			outl(inl(VPP_PORT) | 1, VPP_PORT);
 	} else {
-		l &= ~1;
+		if (--l440gx_vpp_refcnt == 0)   /* last nested 'off' */
+			outl(inl(VPP_PORT) & ~1, VPP_PORT);
 	}
-	outl(l, VPP_PORT);
+	spin_unlock_irqrestore(&l440gx_vpp_lock, flags);
 }
 
 static struct map_info l440gx_map = {
@@ -138,7 +142,7 @@ static int __init init_l440gx(void)
 	if (mymtd) {
 		mymtd->owner = THIS_MODULE;
 
-		add_mtd_device(mymtd);
+		mtd_device_register(mymtd, NULL, 0);
 		return 0;
 	}
 
@@ -148,7 +152,7 @@ static int __init init_l440gx(void)
 
 static void __exit cleanup_l440gx(void)
 {
-	del_mtd_device(mymtd);
+	mtd_device_unregister(mymtd);
 	map_destroy(mymtd);
 
 	iounmap(l440gx_map.virt);
diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c
new file mode 100644
index 00000000000..7aa682cd4d7
--- /dev/null
+++ b/drivers/mtd/maps/lantiq-flash.c
@@ -0,0 +1,217 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2004 Liu Peng Infineon IFAP DC COM CPE
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/cfi.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/of.h>
+
+#include <lantiq_soc.h>
+
+/*
+ * The NOR flash is connected to the same external bus unit (EBU) as PCI.
+ * To make PCI work we need to enable the endianness swapping for the address
+ * written to the EBU. This endianness swapping works for PCI correctly but
+ * fails for attached NOR devices. To workaround this we need to use a complex
+ * map. The workaround involves swapping all addresses whilst probing the chip.
+ * Once probing is complete we stop swapping the addresses but swizzle the
+ * unlock addresses to ensure that access to the NOR device works correctly.
+ */
+
+enum {
+	LTQ_NOR_PROBING,
+	LTQ_NOR_NORMAL
+};
+
+struct ltq_mtd {
+	struct resource *res;
+	struct mtd_info *mtd;
+	struct map_info *map;
+};
+
+static const char ltq_map_name[] = "ltq_nor";
+static const char * const ltq_probe_types[] = { "cmdlinepart", "ofpart", NULL };
+
+static map_word
+ltq_read16(struct map_info *map, unsigned long adr)
+{
+	unsigned long flags;
+	map_word temp;
+
+	if (map->map_priv_1 == LTQ_NOR_PROBING)
+		adr ^= 2;
+	spin_lock_irqsave(&ebu_lock, flags);
+	temp.x[0] = *(u16 *)(map->virt + adr);
+	spin_unlock_irqrestore(&ebu_lock, flags);
+	return temp;
+}
+
+static void
+ltq_write16(struct map_info *map, map_word d, unsigned long adr)
+{
+	unsigned long flags;
+
+	if (map->map_priv_1 == LTQ_NOR_PROBING)
+		adr ^= 2;
+	spin_lock_irqsave(&ebu_lock, flags);
+	*(u16 *)(map->virt + adr) = d.x[0];
+	spin_unlock_irqrestore(&ebu_lock, flags);
+}
+
+/*
+ * The following 2 functions copy data between iomem and a cached memory
+ * section. As memcpy() makes use of pre-fetching we cannot use it here.
+ * The normal alternative of using memcpy_{to,from}io also makes use of
+ * memcpy() on MIPS so it is not applicable either. We are therefore stuck
+ * with having to use our own loop.
+ */
+static void
+ltq_copy_from(struct map_info *map, void *to,
+	unsigned long from, ssize_t len)
+{
+	unsigned char *f = (unsigned char *)map->virt + from;
+	unsigned char *t = (unsigned char *)to;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ebu_lock, flags);
+	while (len--)
+		*t++ = *f++;
+	spin_unlock_irqrestore(&ebu_lock, flags);
+}
+
+static void
+ltq_copy_to(struct map_info *map, unsigned long to,
+	const void *from, ssize_t len)
+{
+	unsigned char *f = (unsigned char *)from;
+	unsigned char *t = (unsigned char *)map->virt + to;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ebu_lock, flags);
+	while (len--)
+		*t++ = *f++;
+	spin_unlock_irqrestore(&ebu_lock, flags);
+}
+
+static int
+ltq_mtd_probe(struct platform_device *pdev)
+{
+	struct mtd_part_parser_data ppdata;
+	struct ltq_mtd *ltq_mtd;
+	struct cfi_private *cfi;
+	int err;
+
+	if (of_machine_is_compatible("lantiq,falcon") &&
+			(ltq_boot_select() != BS_FLASH)) {
+		dev_err(&pdev->dev, "invalid bootstrap options\n");
+		return -ENODEV;
+	}
+
+	ltq_mtd = devm_kzalloc(&pdev->dev, sizeof(struct ltq_mtd), GFP_KERNEL);
+	if (!ltq_mtd)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ltq_mtd);
+
+	ltq_mtd->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!ltq_mtd->res) {
+		dev_err(&pdev->dev, "failed to get memory resource\n");
+		return -ENOENT;
+	}
+
+	ltq_mtd->map = devm_kzalloc(&pdev->dev, sizeof(struct map_info),
+				    GFP_KERNEL);
+	if (!ltq_mtd->map)
+		return -ENOMEM;
+
+	ltq_mtd->map->phys = ltq_mtd->res->start;
+	ltq_mtd->map->size = resource_size(ltq_mtd->res);
+	ltq_mtd->map->virt = devm_ioremap_resource(&pdev->dev, ltq_mtd->res);
+	if (IS_ERR(ltq_mtd->map->virt))
+		return PTR_ERR(ltq_mtd->map->virt);
+
+	ltq_mtd->map->name = ltq_map_name;
+	ltq_mtd->map->bankwidth = 2;
+	ltq_mtd->map->read = ltq_read16;
+	ltq_mtd->map->write = ltq_write16;
+	ltq_mtd->map->copy_from = ltq_copy_from;
+	ltq_mtd->map->copy_to = ltq_copy_to;
+
+	ltq_mtd->map->map_priv_1 = LTQ_NOR_PROBING;
+	ltq_mtd->mtd = do_map_probe("cfi_probe", ltq_mtd->map);
+	ltq_mtd->map->map_priv_1 = LTQ_NOR_NORMAL;
+
+	if (!ltq_mtd->mtd) {
+		dev_err(&pdev->dev, "probing failed\n");
+		return -ENXIO;
+	}
+
+	ltq_mtd->mtd->owner = THIS_MODULE;
+
+	cfi = ltq_mtd->map->fldrv_priv;
+	cfi->addr_unlock1 ^= 1;
+	cfi->addr_unlock2 ^= 1;
+
+	ppdata.of_node = pdev->dev.of_node;
+	err = mtd_device_parse_register(ltq_mtd->mtd, ltq_probe_types,
+					&ppdata, NULL, 0);
+	if (err) {
+		dev_err(&pdev->dev, "failed to add partitions\n");
+		goto err_destroy;
+	}
+
+	return 0;
+
+err_destroy:
+	map_destroy(ltq_mtd->mtd);
+	return err;
+}
+
+static int
+ltq_mtd_remove(struct platform_device *pdev)
+{
+	struct ltq_mtd *ltq_mtd = platform_get_drvdata(pdev);
+
+	if (ltq_mtd && ltq_mtd->mtd) {
+		mtd_device_unregister(ltq_mtd->mtd);
+		map_destroy(ltq_mtd->mtd);
+	}
+	return 0;
+}
+
+static const struct of_device_id ltq_mtd_match[] = {
+	{ .compatible = "lantiq,nor" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ltq_mtd_match);
+
+static struct platform_driver ltq_mtd_driver = {
+	.probe = ltq_mtd_probe,
+	.remove = ltq_mtd_remove,
+	.driver = {
+		.name = "ltq-nor",
+		.owner = THIS_MODULE,
+		.of_match_table = ltq_mtd_match,
+	},
+};
+
+module_platform_driver(ltq_mtd_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+MODULE_DESCRIPTION("Lantiq SoC NOR");
diff --git a/drivers/mtd/maps/latch-addr-flash.c b/drivers/mtd/maps/latch-addr-flash.c
new file mode 100644
index 00000000000..cadfbe05187
--- /dev/null
+++ b/drivers/mtd/maps/latch-addr-flash.c
@@ -0,0 +1,230 @@
+/*
+ * Interface for NOR flash driver whose high address lines are latched
+ *
+ * Copyright © 2000 Nicolas Pitre <nico@cam.org>
+ * Copyright © 2005-2008 Analog Devices Inc.
+ * Copyright © 2008 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/latch-addr-flash.h>
+#include <linux/slab.h>
+
+#define DRIVER_NAME "latch-addr-flash"
+
+struct latch_addr_flash_info {
+	struct mtd_info		*mtd;
+	struct map_info		map;
+	struct resource		*res;
+
+	void			(*set_window)(unsigned long offset, void *data);
+	void			*data;
+
+	/* cache; could be found out of res */
+	unsigned long		win_mask;
+
+	spinlock_t		lock;
+};
+
+static map_word lf_read(struct map_info *map, unsigned long ofs)
+{
+	struct latch_addr_flash_info *info;
+	map_word datum;
+
+	info = (struct latch_addr_flash_info *)map->map_priv_1;
+
+	spin_lock(&info->lock);
+
+	info->set_window(ofs, info->data);
+	datum = inline_map_read(map, info->win_mask & ofs);
+
+	spin_unlock(&info->lock);
+
+	return datum;
+}
+
+static void lf_write(struct map_info *map, map_word datum, unsigned long ofs)
+{
+	struct latch_addr_flash_info *info;
+
+	info = (struct latch_addr_flash_info *)map->map_priv_1;
+
+	spin_lock(&info->lock);
+
+	info->set_window(ofs, info->data);
+	inline_map_write(map, datum, info->win_mask & ofs);
+
+	spin_unlock(&info->lock);
+}
+
+static void lf_copy_from(struct map_info *map, void *to,
+		unsigned long from, ssize_t len)
+{
+	struct latch_addr_flash_info *info =
+		(struct latch_addr_flash_info *) map->map_priv_1;
+	unsigned n;
+
+	while (len > 0) {
+		n = info->win_mask + 1 - (from & info->win_mask);
+		if (n > len)
+			n = len;
+
+		spin_lock(&info->lock);
+
+		info->set_window(from, info->data);
+		memcpy_fromio(to, map->virt + (from & info->win_mask), n);
+
+		spin_unlock(&info->lock);
+
+		to += n;
+		from += n;
+		len -= n;
+	}
+}
+
+static char *rom_probe_types[] = { "cfi_probe", NULL };
+
+static int latch_addr_flash_remove(struct platform_device *dev)
+{
+	struct latch_addr_flash_info *info;
+	struct latch_addr_flash_data *latch_addr_data;
+
+	info = platform_get_drvdata(dev);
+	if (info == NULL)
+		return 0;
+
+	latch_addr_data = dev_get_platdata(&dev->dev);
+
+	if (info->mtd != NULL) {
+		mtd_device_unregister(info->mtd);
+		map_destroy(info->mtd);
+	}
+
+	if (info->map.virt != NULL)
+		iounmap(info->map.virt);
+
+	if (info->res != NULL)
+		release_mem_region(info->res->start, resource_size(info->res));
+
+	kfree(info);
+
+	if (latch_addr_data->done)
+		latch_addr_data->done(latch_addr_data->data);
+
+	return 0;
+}
+
+static int latch_addr_flash_probe(struct platform_device *dev)
+{
+	struct latch_addr_flash_data *latch_addr_data;
+	struct latch_addr_flash_info *info;
+	resource_size_t win_base = dev->resource->start;
+	resource_size_t win_size = resource_size(dev->resource);
+	char **probe_type;
+	int chipsel;
+	int err;
+
+	latch_addr_data = dev_get_platdata(&dev->dev);
+	if (latch_addr_data == NULL)
+		return -ENODEV;
+
+	pr_notice("latch-addr platform flash device: %#llx byte "
+		  "window at %#.8llx\n",
+		  (unsigned long long)win_size, (unsigned long long)win_base);
+
+	chipsel = dev->id;
+
+	if (latch_addr_data->init) {
+		err = latch_addr_data->init(latch_addr_data->data, chipsel);
+		if (err != 0)
+			return err;
+	}
+
+	info = kzalloc(sizeof(struct latch_addr_flash_info), GFP_KERNEL);
+	if (info == NULL) {
+		err = -ENOMEM;
+		goto done;
+	}
+
+	platform_set_drvdata(dev, info);
+
+	info->res = request_mem_region(win_base, win_size, DRIVER_NAME);
+	if (info->res == NULL) {
+		dev_err(&dev->dev, "Could not reserve memory region\n");
+		err = -EBUSY;
+		goto free_info;
+	}
+
+	info->map.name		= DRIVER_NAME;
+	info->map.size		= latch_addr_data->size;
+	info->map.bankwidth	= latch_addr_data->width;
+
+	info->map.phys		= NO_XIP;
+	info->map.virt		= ioremap(win_base, win_size);
+	if (!info->map.virt) {
+		err = -ENOMEM;
+		goto free_res;
+	}
+
+	info->map.map_priv_1	= (unsigned long)info;
+
+	info->map.read		= lf_read;
+	info->map.copy_from	= lf_copy_from;
+	info->map.write		= lf_write;
+	info->set_window	= latch_addr_data->set_window;
+	info->data		= latch_addr_data->data;
+	info->win_mask		= win_size - 1;
+
+	spin_lock_init(&info->lock);
+
+	for (probe_type = rom_probe_types; !info->mtd && *probe_type;
+		probe_type++)
+		info->mtd = do_map_probe(*probe_type, &info->map);
+
+	if (info->mtd == NULL) {
+		dev_err(&dev->dev, "map_probe failed\n");
+		err = -ENODEV;
+		goto iounmap;
+	}
+	info->mtd->owner = THIS_MODULE;
+
+	mtd_device_parse_register(info->mtd, NULL, NULL,
+				  latch_addr_data->parts,
+				  latch_addr_data->nr_parts);
+	return 0;
+
+iounmap:
+	iounmap(info->map.virt);
+free_res:
+	release_mem_region(info->res->start, resource_size(info->res));
+free_info:
+	kfree(info);
+done:
+	if (latch_addr_data->done)
+		latch_addr_data->done(latch_addr_data->data);
+	return err;
+}
+
+static struct platform_driver latch_addr_flash_driver = {
+	.probe		= latch_addr_flash_probe,
+	.remove		= latch_addr_flash_remove,
+	.driver		= {
+		.name	= DRIVER_NAME,
+	},
+};
+
+module_platform_driver(latch_addr_flash_driver);
+
+MODULE_AUTHOR("David Griego <dgriego@mvista.com>");
+MODULE_DESCRIPTION("MTD map driver for flashes addressed physically with upper "
+		"address lines being set board specifically");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/maps/mbx860.c b/drivers/mtd/maps/mbx860.c
deleted file mode 100644
index 0eb5a7c8538..00000000000
--- a/drivers/mtd/maps/mbx860.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * Handle mapping of the flash on MBX860 boards
- *
- * Author:	Anton Todorov
- * Copyright:	(C) 2001 Emness Technology
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-
-#define WINDOW_ADDR 0xfe000000
-#define WINDOW_SIZE 0x00200000
-
-/* Flash / Partition sizing */
-#define MAX_SIZE_KiB              8192
-#define BOOT_PARTITION_SIZE_KiB    512
-#define KERNEL_PARTITION_SIZE_KiB 5632
-#define APP_PARTITION_SIZE_KiB    2048
-
-#define NUM_PARTITIONS 3
-
-/* partition_info gives details on the logical partitions that the split the
- * single flash device into. If the size if zero we use up to the end of the
- * device. */
-static struct mtd_partition partition_info[]={
-	{ .name = "MBX flash BOOT partition",
-	.offset = 0,
-	.size =   BOOT_PARTITION_SIZE_KiB*1024 },
-	{ .name = "MBX flash DATA partition",
-	.offset = BOOT_PARTITION_SIZE_KiB*1024,
-	.size = (KERNEL_PARTITION_SIZE_KiB)*1024 },
-	{ .name = "MBX flash APPLICATION partition",
-	.offset = (BOOT_PARTITION_SIZE_KiB+KERNEL_PARTITION_SIZE_KiB)*1024 }
-};
-
-
-static struct mtd_info *mymtd;
-
-struct map_info mbx_map = {
-	.name = "MBX flash",
-	.size = WINDOW_SIZE,
-	.phys = WINDOW_ADDR,
-	.bankwidth = 4,
-};
-
-static int __init init_mbx(void)
-{
-	printk(KERN_NOTICE "Motorola MBX flash device: 0x%x at 0x%x\n", WINDOW_SIZE*4, WINDOW_ADDR);
-	mbx_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE * 4);
-
-	if (!mbx_map.virt) {
-		printk("Failed to ioremap\n");
-		return -EIO;
-	}
-	simple_map_init(&mbx_map);
-
-	mymtd = do_map_probe("jedec_probe", &mbx_map);
-	if (mymtd) {
-		mymtd->owner = THIS_MODULE;
-		add_mtd_device(mymtd);
-                add_mtd_partitions(mymtd, partition_info, NUM_PARTITIONS);
-		return 0;
-	}
-
-	iounmap((void *)mbx_map.virt);
-	return -ENXIO;
-}
-
-static void __exit cleanup_mbx(void)
-{
-	if (mymtd) {
-		del_mtd_device(mymtd);
-		map_destroy(mymtd);
-	}
-	if (mbx_map.virt) {
-		iounmap((void *)mbx_map.virt);
-		mbx_map.virt = 0;
-	}
-}
-
-module_init(init_mbx);
-module_exit(cleanup_mbx);
-
-MODULE_AUTHOR("Anton Todorov <a.todorov@emness.com>");
-MODULE_DESCRIPTION("MTD map driver for Motorola MBX860 board");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/netsc520.c b/drivers/mtd/maps/netsc520.c
index c0cb319b2b7..81dc2598bc0 100644
--- a/drivers/mtd/maps/netsc520.c
+++ b/drivers/mtd/maps/netsc520.c
@@ -116,14 +116,14 @@ static int __init init_netsc520(void)
 	}
 
 	mymtd->owner = THIS_MODULE;
-	add_mtd_partitions( mymtd, partition_info, NUM_PARTITIONS );
+	mtd_device_register(mymtd, partition_info, NUM_PARTITIONS);
 	return 0;
 }
 
 static void __exit cleanup_netsc520(void)
 {
 	if (mymtd) {
-		del_mtd_partitions(mymtd);
+		mtd_device_unregister(mymtd);
 		map_destroy(mymtd);
 	}
 	if (netsc520_map.virt) {
diff --git a/drivers/mtd/maps/nettel.c b/drivers/mtd/maps/nettel.c
index a97133eb9d7..eadcfffc4f9 100644
--- a/drivers/mtd/maps/nettel.c
+++ b/drivers/mtd/maps/nettel.c
@@ -383,13 +383,13 @@ static int __init nettel_init(void)
 		/* No BIOS regions when AMD boot */
 		num_intel_partitions -= 2;
 	}
-	rc = add_mtd_partitions(intel_mtd, nettel_intel_partitions,
-		num_intel_partitions);
+	rc = mtd_device_register(intel_mtd, nettel_intel_partitions,
+				 num_intel_partitions);
 #endif
 
 	if (amd_mtd) {
-		rc = add_mtd_partitions(amd_mtd, nettel_amd_partitions,
-			num_amd_partitions);
+		rc = mtd_device_register(amd_mtd, nettel_amd_partitions,
+					 num_amd_partitions);
 	}
 
 #ifdef CONFIG_MTD_CFI_INTELEXT
@@ -419,7 +419,7 @@ static void __exit nettel_cleanup(void)
 	unregister_reboot_notifier(&nettel_notifier_block);
 #endif
 	if (amd_mtd) {
-		del_mtd_partitions(amd_mtd);
+		mtd_device_unregister(amd_mtd);
 		map_destroy(amd_mtd);
 	}
 	if (nettel_mmcrp) {
@@ -432,7 +432,7 @@ static void __exit nettel_cleanup(void)
 	}
 #ifdef CONFIG_MTD_CFI_INTELEXT
 	if (intel_mtd) {
-		del_mtd_partitions(intel_mtd);
+		mtd_device_unregister(intel_mtd);
 		map_destroy(intel_mtd);
 	}
 	if (nettel_intel_map.virt) {
diff --git a/drivers/mtd/maps/octagon-5066.c b/drivers/mtd/maps/octagon-5066.c
deleted file mode 100644
index 23fe1786770..00000000000
--- a/drivers/mtd/maps/octagon-5066.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/* ######################################################################
-
-   Octagon 5066 MTD Driver.
-
-   The Octagon 5066 is a SBC based on AMD's 586-WB running at 133 MHZ. It
-   comes with a builtin AMD 29F016 flash chip and a socketed EEPROM that
-   is replacable by flash. Both units are mapped through a multiplexer
-   into a 32k memory window at 0xe8000. The control register for the
-   multiplexing unit is located at IO 0x208 with a bit map of
-     0-5 Page Selection in 32k increments
-     6-7 Device selection:
-        00 SSD off
-        01 SSD 0 (Socket)
-        10 SSD 1 (Flash chip)
-        11 undefined
-
-   On each SSD, the first 128k is reserved for use by the bios
-   (actually it IS the bios..) This only matters if you are booting off the
-   flash, you must not put a file system starting there.
-
-   The driver tries to do a detection algorithm to guess what sort of devices
-   are plugged into the sockets.
-
-   ##################################################################### */
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <asm/io.h>
-
-#include <linux/mtd/map.h>
-#include <linux/mtd/mtd.h>
-
-#define WINDOW_START 0xe8000
-#define WINDOW_LENGTH 0x8000
-#define WINDOW_SHIFT 27
-#define WINDOW_MASK 0x7FFF
-#define PAGE_IO 0x208
-
-static volatile char page_n_dev = 0;
-static unsigned long iomapadr;
-static DEFINE_SPINLOCK(oct5066_spin);
-
-/*
- * We use map_priv_1 to identify which device we are.
- */
-
-static void __oct5066_page(struct map_info *map, __u8 byte)
-{
-	outb(byte,PAGE_IO);
-	page_n_dev = byte;
-}
-
-static inline void oct5066_page(struct map_info *map, unsigned long ofs)
-{
-	__u8 byte = map->map_priv_1 | (ofs >> WINDOW_SHIFT);
-
-	if (page_n_dev != byte)
-		__oct5066_page(map, byte);
-}
-
-
-static map_word oct5066_read8(struct map_info *map, unsigned long ofs)
-{
-	map_word ret;
-	spin_lock(&oct5066_spin);
-	oct5066_page(map, ofs);
-	ret.x[0] = readb(iomapadr + (ofs & WINDOW_MASK));
-	spin_unlock(&oct5066_spin);
-	return ret;
-}
-
-static void oct5066_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
-{
-	while(len) {
-		unsigned long thislen = len;
-		if (len > (WINDOW_LENGTH - (from & WINDOW_MASK)))
-			thislen = WINDOW_LENGTH-(from & WINDOW_MASK);
-
-		spin_lock(&oct5066_spin);
-		oct5066_page(map, from);
-		memcpy_fromio(to, iomapadr + from, thislen);
-		spin_unlock(&oct5066_spin);
-		to += thislen;
-		from += thislen;
-		len -= thislen;
-	}
-}
-
-static void oct5066_write8(struct map_info *map, map_word d, unsigned long adr)
-{
-	spin_lock(&oct5066_spin);
-	oct5066_page(map, adr);
-	writeb(d.x[0], iomapadr + (adr & WINDOW_MASK));
-	spin_unlock(&oct5066_spin);
-}
-
-static void oct5066_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
-{
-	while(len) {
-		unsigned long thislen = len;
-		if (len > (WINDOW_LENGTH - (to & WINDOW_MASK)))
-			thislen = WINDOW_LENGTH-(to & WINDOW_MASK);
-
-		spin_lock(&oct5066_spin);
-		oct5066_page(map, to);
-		memcpy_toio(iomapadr + to, from, thislen);
-		spin_unlock(&oct5066_spin);
-		to += thislen;
-		from += thislen;
-		len -= thislen;
-	}
-}
-
-static struct map_info oct5066_map[2] = {
-	{
-		.name = "Octagon 5066 Socket",
-		.phys = NO_XIP,
-		.size = 512 * 1024,
-		.bankwidth = 1,
-		.read = oct5066_read8,
-		.copy_from = oct5066_copy_from,
-		.write = oct5066_write8,
-		.copy_to = oct5066_copy_to,
-		.map_priv_1 = 1<<6
-	},
-	{
-		.name = "Octagon 5066 Internal Flash",
-		.phys = NO_XIP,
-		.size = 2 * 1024 * 1024,
-		.bankwidth = 1,
-		.read = oct5066_read8,
-		.copy_from = oct5066_copy_from,
-		.write = oct5066_write8,
-		.copy_to = oct5066_copy_to,
-		.map_priv_1 = 2<<6
-	}
-};
-
-static struct mtd_info *oct5066_mtd[2] = {NULL, NULL};
-
-// OctProbe - Sense if this is an octagon card
-// ---------------------------------------------------------------------
-/* Perform a simple validity test, we map the window select SSD0 and
-   change pages while monitoring the window. A change in the window,
-   controlled by the PAGE_IO port is a functioning 5066 board. This will
-   fail if the thing in the socket is set to a uniform value. */
-static int __init OctProbe(void)
-{
-   unsigned int Base = (1 << 6);
-   unsigned long I;
-   unsigned long Values[10];
-   for (I = 0; I != 20; I++)
-   {
-      outb(Base + (I%10),PAGE_IO);
-      if (I < 10)
-      {
-	 // Record the value and check for uniqueness
-	 Values[I%10] = readl(iomapadr);
-	 if (I > 0 && Values[I%10] == Values[0])
-	    return -EAGAIN;
-      }
-      else
-      {
-	 // Make sure we get the same values on the second pass
-	 if (Values[I%10] != readl(iomapadr))
-	    return -EAGAIN;
-      }
-   }
-   return 0;
-}
-
-void cleanup_oct5066(void)
-{
-	int i;
-	for (i=0; i<2; i++) {
-		if (oct5066_mtd[i]) {
-			del_mtd_device(oct5066_mtd[i]);
-			map_destroy(oct5066_mtd[i]);
-		}
-	}
-	iounmap((void *)iomapadr);
-	release_region(PAGE_IO, 1);
-}
-
-static int __init init_oct5066(void)
-{
-	int i;
-	int ret = 0;
-
-	// Do an autoprobe sequence
-	if (!request_region(PAGE_IO,1,"Octagon SSD")) {
-		printk(KERN_NOTICE "5066: Page Register in Use\n");
-		return -EAGAIN;
-	}
-	iomapadr = (unsigned long)ioremap(WINDOW_START, WINDOW_LENGTH);
-	if (!iomapadr) {
-		printk(KERN_NOTICE "Failed to ioremap memory region\n");
-		ret = -EIO;
-		goto out_rel;
-	}
-	if (OctProbe() != 0) {
-		printk(KERN_NOTICE "5066: Octagon Probe Failed, is this an Octagon 5066 SBC?\n");
-		iounmap((void *)iomapadr);
-		ret = -EAGAIN;
-		goto out_unmap;
-	}
-
-	// Print out our little header..
-	printk("Octagon 5066 SSD IO:0x%x MEM:0x%x-0x%x\n",PAGE_IO,WINDOW_START,
-	       WINDOW_START+WINDOW_LENGTH);
-
-	for (i=0; i<2; i++) {
-		oct5066_mtd[i] = do_map_probe("cfi_probe", &oct5066_map[i]);
-		if (!oct5066_mtd[i])
-			oct5066_mtd[i] = do_map_probe("jedec", &oct5066_map[i]);
-		if (!oct5066_mtd[i])
-			oct5066_mtd[i] = do_map_probe("map_ram", &oct5066_map[i]);
-		if (!oct5066_mtd[i])
-			oct5066_mtd[i] = do_map_probe("map_rom", &oct5066_map[i]);
-		if (oct5066_mtd[i]) {
-			oct5066_mtd[i]->owner = THIS_MODULE;
-			add_mtd_device(oct5066_mtd[i]);
-		}
-	}
-
-	if (!oct5066_mtd[0] && !oct5066_mtd[1]) {
-		cleanup_oct5066();
-		return -ENXIO;
-	}
-
-	return 0;
-
- out_unmap:
-	iounmap((void *)iomapadr);
- out_rel:
-	release_region(PAGE_IO, 1);
-	return ret;
-}
-
-module_init(init_oct5066);
-module_exit(cleanup_oct5066);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jason Gunthorpe <jgg@deltatee.com>, David Woodhouse <dwmw2@infradead.org>");
-MODULE_DESCRIPTION("MTD map driver for Octagon 5066 Single Board Computer");
diff --git a/drivers/mtd/maps/pci.c b/drivers/mtd/maps/pci.c
index 48f4cf5cb9d..eb0242e0b2d 100644
--- a/drivers/mtd/maps/pci.c
+++ b/drivers/mtd/maps/pci.c
@@ -14,7 +14,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 
 #include <linux/mtd/mtd.h>
@@ -43,26 +42,14 @@ static map_word mtd_pci_read8(struct map_info *_map, unsigned long ofs)
 	struct map_pci_info *map = (struct map_pci_info *)_map;
 	map_word val;
 	val.x[0]= readb(map->base + map->translate(map, ofs));
-//	printk("read8 : %08lx => %02x\n", ofs, val.x[0]);
 	return val;
 }
 
-#if 0
-static map_word mtd_pci_read16(struct map_info *_map, unsigned long ofs)
-{
-	struct map_pci_info *map = (struct map_pci_info *)_map;
-	map_word val;
-	val.x[0] = readw(map->base + map->translate(map, ofs));
-//	printk("read16: %08lx => %04x\n", ofs, val.x[0]);
-	return val;
-}
-#endif
 static map_word mtd_pci_read32(struct map_info *_map, unsigned long ofs)
 {
 	struct map_pci_info *map = (struct map_pci_info *)_map;
 	map_word val;
 	val.x[0] = readl(map->base + map->translate(map, ofs));
-//	printk("read32: %08lx => %08x\n", ofs, val.x[0]);
 	return val;
 }
 
@@ -75,22 +62,12 @@ static void mtd_pci_copyfrom(struct map_info *_map, void *to, unsigned long from
 static void mtd_pci_write8(struct map_info *_map, map_word val, unsigned long ofs)
 {
 	struct map_pci_info *map = (struct map_pci_info *)_map;
-//	printk("write8 : %08lx <= %02x\n", ofs, val.x[0]);
 	writeb(val.x[0], map->base + map->translate(map, ofs));
 }
 
-#if 0
-static void mtd_pci_write16(struct map_info *_map, map_word val, unsigned long ofs)
-{
-	struct map_pci_info *map = (struct map_pci_info *)_map;
-//	printk("write16: %08lx <= %04x\n", ofs, val.x[0]);
-	writew(val.x[0], map->base + map->translate(map, ofs));
-}
-#endif
 static void mtd_pci_write32(struct map_info *_map, map_word val, unsigned long ofs)
 {
 	struct map_pci_info *map = (struct map_pci_info *)_map;
-//	printk("write32: %08lx <= %08x\n", ofs, val.x[0]);
 	writel(val.x[0], map->base + map->translate(map, ofs));
 }
 
@@ -275,8 +252,7 @@ static struct pci_device_id mtd_pci_ids[] = {
  * Generic code follows.
  */
 
-static int __devinit
-mtd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+static int mtd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	struct mtd_pci_info *info = (struct mtd_pci_info *)id->driver_data;
 	struct map_pci_info *map = NULL;
@@ -306,14 +282,13 @@ mtd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	if (err)
 		goto release;
 
-	/* tsk - do_map_probe should take const char * */
-	mtd = do_map_probe((char *)info->map_name, &map->map);
+	mtd = do_map_probe(info->map_name, &map->map);
 	err = -ENODEV;
 	if (!mtd)
 		goto release;
 
 	mtd->owner = THIS_MODULE;
-	add_mtd_device(mtd);
+	mtd_device_register(mtd, NULL, 0);
 
 	pci_set_drvdata(dev, mtd);
 
@@ -330,43 +305,29 @@ out:
 	return err;
 }
 
-static void __devexit
-mtd_pci_remove(struct pci_dev *dev)
+static void mtd_pci_remove(struct pci_dev *dev)
 {
 	struct mtd_info *mtd = pci_get_drvdata(dev);
 	struct map_pci_info *map = mtd->priv;
 
-	del_mtd_device(mtd);
+	mtd_device_unregister(mtd);
 	map_destroy(mtd);
 	map->exit(dev, map);
 	kfree(map);
 
-	pci_set_drvdata(dev, NULL);
 	pci_release_regions(dev);
 }
 
 static struct pci_driver mtd_pci_driver = {
 	.name =		"MTD PCI",
 	.probe =	mtd_pci_probe,
-	.remove =	__devexit_p(mtd_pci_remove),
+	.remove =	mtd_pci_remove,
 	.id_table =	mtd_pci_ids,
 };
 
-static int __init mtd_pci_maps_init(void)
-{
-	return pci_register_driver(&mtd_pci_driver);
-}
-
-static void __exit mtd_pci_maps_exit(void)
-{
-	pci_unregister_driver(&mtd_pci_driver);
-}
-
-module_init(mtd_pci_maps_init);
-module_exit(mtd_pci_maps_exit);
+module_pci_driver(mtd_pci_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
 MODULE_DESCRIPTION("Generic PCI map driver");
 MODULE_DEVICE_TABLE(pci, mtd_pci_ids);
-
diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c
index e699e6ac23d..a3cfad392ed 100644
--- a/drivers/mtd/maps/pcmciamtd.c
+++ b/drivers/mtd/maps/pcmciamtd.c
@@ -14,32 +14,13 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <asm/io.h>
-#include <asm/system.h>
 
-#include <pcmcia/cs_types.h>
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
 
 #include <linux/mtd/map.h>
 #include <linux/mtd/mtd.h>
 
-#ifdef CONFIG_MTD_DEBUG
-static int debug = CONFIG_MTD_DEBUG_VERBOSE;
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "Set Debug Level 0=quiet, 5=noisy");
-#undef DEBUG
-#define DEBUG(n, format, arg...) \
-	if (n <= debug) {	 \
-		printk(KERN_DEBUG __FILE__ ":%s(): " format "\n", __func__ , ## arg); \
-	}
-
-#else
-#undef DEBUG
-#define DEBUG(n, arg...)
-static const int debug = 0;
-#endif
-
 #define info(format, arg...) printk(KERN_INFO "pcmciamtd: " format "\n" , ## arg)
 
 #define DRIVER_DESC	"PCMCIA Flash memory card driver"
@@ -102,24 +83,23 @@ MODULE_PARM_DESC(mem_type, "Set Memory type (0=Flash, 1=RAM, 2=ROM, default=0)")
 static caddr_t remap_window(struct map_info *map, unsigned long to)
 {
 	struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1;
-	window_handle_t win = (window_handle_t)map->map_priv_2;
-	memreq_t mrq;
+	struct resource *win = (struct resource *) map->map_priv_2;
+	unsigned int offset;
 	int ret;
 
 	if (!pcmcia_dev_present(dev->p_dev)) {
-		DEBUG(1, "device removed");
+		pr_debug("device removed\n");
 		return 0;
 	}
 
-	mrq.CardOffset = to & ~(dev->win_size-1);
-	if(mrq.CardOffset != dev->offset) {
-		DEBUG(2, "Remapping window from 0x%8.8x to 0x%8.8x",
-		      dev->offset, mrq.CardOffset);
-		mrq.Page = 0;
-		ret = pcmcia_map_mem_page(dev->p_dev, win, &mrq);
+	offset = to & ~(dev->win_size-1);
+	if (offset != dev->offset) {
+		pr_debug("Remapping window from 0x%8.8x to 0x%8.8x\n",
+		      dev->offset, offset);
+		ret = pcmcia_map_mem_page(dev->p_dev, win, offset);
 		if (ret != 0)
 			return NULL;
-		dev->offset = mrq.CardOffset;
+		dev->offset = offset;
 	}
 	return dev->win_base + (to & (dev->win_size-1));
 }
@@ -135,7 +115,7 @@ static map_word pcmcia_read8_remap(struct map_info *map, unsigned long ofs)
 		return d;
 
 	d.x[0] = readb(addr);
-	DEBUG(3, "ofs = 0x%08lx (%p) data = 0x%02lx", ofs, addr, d.x[0]);
+	pr_debug("ofs = 0x%08lx (%p) data = 0x%02lx\n", ofs, addr, d.x[0]);
 	return d;
 }
 
@@ -150,7 +130,7 @@ static map_word pcmcia_read16_remap(struct map_info *map, unsigned long ofs)
 		return d;
 
 	d.x[0] = readw(addr);
-	DEBUG(3, "ofs = 0x%08lx (%p) data = 0x%04lx", ofs, addr, d.x[0]);
+	pr_debug("ofs = 0x%08lx (%p) data = 0x%04lx\n", ofs, addr, d.x[0]);
 	return d;
 }
 
@@ -160,7 +140,7 @@ static void pcmcia_copy_from_remap(struct map_info *map, void *to, unsigned long
 	struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1;
 	unsigned long win_size = dev->win_size;
 
-	DEBUG(3, "to = %p from = %lu len = %zd", to, from, len);
+	pr_debug("to = %p from = %lu len = %zd\n", to, from, len);
 	while(len) {
 		int toread = win_size - (from & (win_size-1));
 		caddr_t addr;
@@ -172,7 +152,7 @@ static void pcmcia_copy_from_remap(struct map_info *map, void *to, unsigned long
 		if(!addr)
 			return;
 
-		DEBUG(4, "memcpy from %p to %p len = %d", addr, to, toread);
+		pr_debug("memcpy from %p to %p len = %d\n", addr, to, toread);
 		memcpy_fromio(to, addr, toread);
 		len -= toread;
 		to += toread;
@@ -188,7 +168,7 @@ static void pcmcia_write8_remap(struct map_info *map, map_word d, unsigned long
 	if(!addr)
 		return;
 
-	DEBUG(3, "adr = 0x%08lx (%p)  data = 0x%02lx", adr, addr, d.x[0]);
+	pr_debug("adr = 0x%08lx (%p)  data = 0x%02lx\n", adr, addr, d.x[0]);
 	writeb(d.x[0], addr);
 }
 
@@ -199,7 +179,7 @@ static void pcmcia_write16_remap(struct map_info *map, map_word d, unsigned long
 	if(!addr)
 		return;
 
-	DEBUG(3, "adr = 0x%08lx (%p)  data = 0x%04lx", adr, addr, d.x[0]);
+	pr_debug("adr = 0x%08lx (%p)  data = 0x%04lx\n", adr, addr, d.x[0]);
 	writew(d.x[0], addr);
 }
 
@@ -209,7 +189,7 @@ static void pcmcia_copy_to_remap(struct map_info *map, unsigned long to, const v
 	struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1;
 	unsigned long win_size = dev->win_size;
 
-	DEBUG(3, "to = %lu from = %p len = %zd", to, from, len);
+	pr_debug("to = %lu from = %p len = %zd\n", to, from, len);
 	while(len) {
 		int towrite = win_size - (to & (win_size-1));
 		caddr_t addr;
@@ -221,7 +201,7 @@ static void pcmcia_copy_to_remap(struct map_info *map, unsigned long to, const v
 		if(!addr)
 			return;
 
-		DEBUG(4, "memcpy from %p to %p len = %d", from, addr, towrite);
+		pr_debug("memcpy from %p to %p len = %d\n", from, addr, towrite);
 		memcpy_toio(addr, from, towrite);
 		len -= towrite;
 		to += towrite;
@@ -243,7 +223,7 @@ static map_word pcmcia_read8(struct map_info *map, unsigned long ofs)
 		return d;
 
 	d.x[0] = readb(win_base + ofs);
-	DEBUG(3, "ofs = 0x%08lx (%p) data = 0x%02lx",
+	pr_debug("ofs = 0x%08lx (%p) data = 0x%02lx\n",
 	      ofs, win_base + ofs, d.x[0]);
 	return d;
 }
@@ -258,7 +238,7 @@ static map_word pcmcia_read16(struct map_info *map, unsigned long ofs)
 		return d;
 
 	d.x[0] = readw(win_base + ofs);
-	DEBUG(3, "ofs = 0x%08lx (%p) data = 0x%04lx",
+	pr_debug("ofs = 0x%08lx (%p) data = 0x%04lx\n",
 	      ofs, win_base + ofs, d.x[0]);
 	return d;
 }
@@ -271,7 +251,7 @@ static void pcmcia_copy_from(struct map_info *map, void *to, unsigned long from,
 	if(DEV_REMOVED(map))
 		return;
 
-	DEBUG(3, "to = %p from = %lu len = %zd", to, from, len);
+	pr_debug("to = %p from = %lu len = %zd\n", to, from, len);
 	memcpy_fromio(to, win_base + from, len);
 }
 
@@ -283,7 +263,7 @@ static void pcmcia_write8(struct map_info *map, map_word d, unsigned long adr)
 	if(DEV_REMOVED(map))
 		return;
 
-	DEBUG(3, "adr = 0x%08lx (%p)  data = 0x%02lx",
+	pr_debug("adr = 0x%08lx (%p)  data = 0x%02lx\n",
 	      adr, win_base + adr, d.x[0]);
 	writeb(d.x[0], win_base + adr);
 }
@@ -296,7 +276,7 @@ static void pcmcia_write16(struct map_info *map, map_word d, unsigned long adr)
 	if(DEV_REMOVED(map))
 		return;
 
-	DEBUG(3, "adr = 0x%08lx (%p)  data = 0x%04lx",
+	pr_debug("adr = 0x%08lx (%p)  data = 0x%04lx\n",
 	      adr, win_base + adr, d.x[0]);
 	writew(d.x[0], win_base + adr);
 }
@@ -309,50 +289,48 @@ static void pcmcia_copy_to(struct map_info *map, unsigned long to, const void *f
 	if(DEV_REMOVED(map))
 		return;
 
-	DEBUG(3, "to = %lu from = %p len = %zd", to, from, len);
+	pr_debug("to = %lu from = %p len = %zd\n", to, from, len);
 	memcpy_toio(win_base + to, from, len);
 }
 
 
+static DEFINE_SPINLOCK(pcmcia_vpp_lock);
+static int pcmcia_vpp_refcnt;
 static void pcmciamtd_set_vpp(struct map_info *map, int on)
 {
 	struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1;
 	struct pcmcia_device *link = dev->p_dev;
-	modconf_t mod;
-	int ret;
-
-	mod.Attributes = CONF_VPP1_CHANGE_VALID | CONF_VPP2_CHANGE_VALID;
-	mod.Vcc = 0;
-	mod.Vpp1 = mod.Vpp2 = on ? dev->vpp : 0;
+	unsigned long flags;
 
-	DEBUG(2, "dev = %p on = %d vpp = %d\n", dev, on, dev->vpp);
-	ret = pcmcia_modify_configuration(link, &mod);
+	pr_debug("dev = %p on = %d vpp = %d\n\n", dev, on, dev->vpp);
+	spin_lock_irqsave(&pcmcia_vpp_lock, flags);
+	if (on) {
+		if (++pcmcia_vpp_refcnt == 1)   /* first nested 'on' */
+			pcmcia_fixup_vpp(link, dev->vpp);
+	} else {
+		if (--pcmcia_vpp_refcnt == 0)   /* last nested 'off' */
+			pcmcia_fixup_vpp(link, 0);
+	}
+	spin_unlock_irqrestore(&pcmcia_vpp_lock, flags);
 }
 
 
-/* After a card is removed, pcmciamtd_release() will unregister the
- * device, and release the PCMCIA configuration.  If the device is
- * still open, this will be postponed until it is closed.
- */
-
 static void pcmciamtd_release(struct pcmcia_device *link)
 {
 	struct pcmciamtd_dev *dev = link->priv;
 
-	DEBUG(3, "link = 0x%p", link);
+	pr_debug("link = 0x%p\n", link);
 
-	if (link->win) {
+	if (link->resource[2]->end) {
 		if(dev->win_base) {
 			iounmap(dev->win_base);
 			dev->win_base = NULL;
 		}
-		pcmcia_release_window(link, link->win);
 	}
 	pcmcia_disable_device(link);
 }
 
 
-#ifdef CONFIG_MTD_DEBUG
 static int pcmciamtd_cistpl_format(struct pcmcia_device *p_dev,
 				tuple_t *tuple,
 				void *priv_data)
@@ -362,7 +340,7 @@ static int pcmciamtd_cistpl_format(struct pcmcia_device *p_dev,
 	if (!pcmcia_parse_tuple(tuple, &parse)) {
 		cistpl_format_t *t = &parse.format;
 		(void)t; /* Shut up, gcc */
-		DEBUG(2, "Format type: %u, Error Detection: %u, offset = %u, length =%u",
+		pr_debug("Format type: %u, Error Detection: %u, offset = %u, length =%u\n",
 			t->type, t->edc, t->offset, t->length);
 	}
 	return -ENOSPC;
@@ -378,12 +356,11 @@ static int pcmciamtd_cistpl_jedec(struct pcmcia_device *p_dev,
 	if (!pcmcia_parse_tuple(tuple, &parse)) {
 		cistpl_jedec_t *t = &parse.jedec;
 		for (i = 0; i < t->nid; i++)
-			DEBUG(2, "JEDEC: 0x%02x 0x%02x",
+			pr_debug("JEDEC: 0x%02x 0x%02x\n",
 			      t->id[i].mfr, t->id[i].info);
 	}
 	return -ENOSPC;
 }
-#endif
 
 static int pcmciamtd_cistpl_device(struct pcmcia_device *p_dev,
 				tuple_t *tuple,
@@ -397,14 +374,14 @@ static int pcmciamtd_cistpl_device(struct pcmcia_device *p_dev,
 	if (pcmcia_parse_tuple(tuple, &parse))
 		return -EINVAL;
 
-	DEBUG(2, "Common memory:");
+	pr_debug("Common memory:\n");
 	dev->pcmcia_map.size = t->dev[0].size;
 	/* from here on: DEBUG only */
 	for (i = 0; i < t->ndev; i++) {
-		DEBUG(2, "Region %d, type = %u", i, t->dev[i].type);
-		DEBUG(2, "Region %d, wp = %u", i, t->dev[i].wp);
-		DEBUG(2, "Region %d, speed = %u ns", i, t->dev[i].speed);
-		DEBUG(2, "Region %d, size = %u bytes", i, t->dev[i].size);
+		pr_debug("Region %d, type = %u\n", i, t->dev[i].type);
+		pr_debug("Region %d, wp = %u\n", i, t->dev[i].wp);
+		pr_debug("Region %d, speed = %u ns\n", i, t->dev[i].speed);
+		pr_debug("Region %d, size = %u bytes\n", i, t->dev[i].size);
 	}
 	return 0;
 }
@@ -424,12 +401,12 @@ static int pcmciamtd_cistpl_geo(struct pcmcia_device *p_dev,
 	dev->pcmcia_map.bankwidth = t->geo[0].buswidth;
 	/* from here on: DEBUG only */
 	for (i = 0; i < t->ngeo; i++) {
-		DEBUG(2, "region: %d bankwidth = %u", i, t->geo[i].buswidth);
-		DEBUG(2, "region: %d erase_block = %u", i, t->geo[i].erase_block);
-		DEBUG(2, "region: %d read_block = %u", i, t->geo[i].read_block);
-		DEBUG(2, "region: %d write_block = %u", i, t->geo[i].write_block);
-		DEBUG(2, "region: %d partition = %u", i, t->geo[i].partition);
-		DEBUG(2, "region: %d interleave = %u", i, t->geo[i].interleave);
+		pr_debug("region: %d bankwidth = %u\n", i, t->geo[i].buswidth);
+		pr_debug("region: %d erase_block = %u\n", i, t->geo[i].erase_block);
+		pr_debug("region: %d read_block = %u\n", i, t->geo[i].read_block);
+		pr_debug("region: %d write_block = %u\n", i, t->geo[i].write_block);
+		pr_debug("region: %d partition = %u\n", i, t->geo[i].partition);
+		pr_debug("region: %d interleave = %u\n", i, t->geo[i].interleave);
 	}
 	return 0;
 }
@@ -447,13 +424,11 @@ static void card_settings(struct pcmciamtd_dev *dev, struct pcmcia_device *p_dev
 			if (p_dev->prod_id[i])
 				strcat(dev->mtd_name, p_dev->prod_id[i]);
 		}
-		DEBUG(2, "Found name: %s", dev->mtd_name);
+		pr_debug("Found name: %s\n", dev->mtd_name);
 	}
 
-#ifdef CONFIG_MTD_DEBUG
 	pcmcia_loop_tuple(p_dev, CISTPL_FORMAT, pcmciamtd_cistpl_format, NULL);
 	pcmcia_loop_tuple(p_dev, CISTPL_JEDEC_C, pcmciamtd_cistpl_jedec, NULL);
-#endif
 	pcmcia_loop_tuple(p_dev, CISTPL_DEVICE, pcmciamtd_cistpl_device, dev);
 	pcmcia_loop_tuple(p_dev, CISTPL_DEVICE_GEO, pcmciamtd_cistpl_geo, dev);
 
@@ -465,12 +440,12 @@ static void card_settings(struct pcmciamtd_dev *dev, struct pcmcia_device *p_dev
 
 	if(force_size) {
 		dev->pcmcia_map.size = force_size << 20;
-		DEBUG(2, "size forced to %dM", force_size);
+		pr_debug("size forced to %dM\n", force_size);
 	}
 
 	if(bankwidth) {
 		dev->pcmcia_map.bankwidth = bankwidth;
-		DEBUG(2, "bankwidth forced to %d", bankwidth);
+		pr_debug("bankwidth forced to %d\n", bankwidth);
 	}
 
 	dev->pcmcia_map.name = dev->mtd_name;
@@ -479,28 +454,22 @@ static void card_settings(struct pcmciamtd_dev *dev, struct pcmcia_device *p_dev
 		*new_name = 1;
 	}
 
-	DEBUG(1, "Device: Size: %lu Width:%d Name: %s",
+	pr_debug("Device: Size: %lu Width:%d Name: %s\n",
 	      dev->pcmcia_map.size,
 	      dev->pcmcia_map.bankwidth << 3, dev->mtd_name);
 }
 
 
-/* pcmciamtd_config() is scheduled to run after a CARD_INSERTION event
- * is received, to configure the PCMCIA socket, and to make the
- * MTD device available to the system.
- */
-
 static int pcmciamtd_config(struct pcmcia_device *link)
 {
 	struct pcmciamtd_dev *dev = link->priv;
 	struct mtd_info *mtd = NULL;
-	win_req_t req;
 	int ret;
-	int i;
+	int i, j = 0;
 	static char *probes[] = { "jedec_probe", "cfi_probe" };
 	int new_name = 0;
 
-	DEBUG(3, "link=0x%p", link);
+	pr_debug("link=0x%p\n", link);
 
 	card_settings(dev, link, &new_name);
 
@@ -518,71 +487,75 @@ static int pcmciamtd_config(struct pcmcia_device *link)
 		dev->pcmcia_map.set_vpp = pcmciamtd_set_vpp;
 
 	/* Request a memory window for PCMCIA. Some architeures can map windows
-	 * upto the maximum that PCMCIA can support (64MiB) - this is ideal and
+	 * up to the maximum that PCMCIA can support (64MiB) - this is ideal and
 	 * we aim for a window the size of the whole card - otherwise we try
 	 * smaller windows until we succeed
 	 */
 
-	req.Attributes =  WIN_MEMORY_TYPE_CM | WIN_ENABLE;
-	req.Attributes |= (dev->pcmcia_map.bankwidth == 1) ? WIN_DATA_WIDTH_8 : WIN_DATA_WIDTH_16;
-	req.Base = 0;
-	req.AccessSpeed = mem_speed;
-	link->win = (window_handle_t)link;
-	req.Size = (force_size) ? force_size << 20 : MAX_PCMCIA_ADDR;
+	link->resource[2]->flags |=  WIN_MEMORY_TYPE_CM | WIN_ENABLE;
+	link->resource[2]->flags |= (dev->pcmcia_map.bankwidth == 1) ?
+					WIN_DATA_WIDTH_8 : WIN_DATA_WIDTH_16;
+	link->resource[2]->start = 0;
+	link->resource[2]->end = (force_size) ? force_size << 20 :
+					MAX_PCMCIA_ADDR;
 	dev->win_size = 0;
 
 	do {
 		int ret;
-		DEBUG(2, "requesting window with size = %dKiB memspeed = %d",
-		      req.Size >> 10, req.AccessSpeed);
-		ret = pcmcia_request_window(link, &req, &link->win);
-		DEBUG(2, "ret = %d dev->win_size = %d", ret, dev->win_size);
+		pr_debug("requesting window with size = %luKiB memspeed = %d\n",
+			(unsigned long) resource_size(link->resource[2]) >> 10,
+			mem_speed);
+		ret = pcmcia_request_window(link, link->resource[2], mem_speed);
+		pr_debug("ret = %d dev->win_size = %d\n", ret, dev->win_size);
 		if(ret) {
-			req.Size >>= 1;
+			j++;
+			link->resource[2]->start = 0;
+			link->resource[2]->end = (force_size) ?
+					force_size << 20 : MAX_PCMCIA_ADDR;
+			link->resource[2]->end >>= j;
 		} else {
-			DEBUG(2, "Got window of size %dKiB", req.Size >> 10);
-			dev->win_size = req.Size;
+			pr_debug("Got window of size %luKiB\n", (unsigned long)
+				resource_size(link->resource[2]) >> 10);
+			dev->win_size = resource_size(link->resource[2]);
 			break;
 		}
-	} while(req.Size >= 0x1000);
+	} while (link->resource[2]->end >= 0x1000);
 
-	DEBUG(2, "dev->win_size = %d", dev->win_size);
+	pr_debug("dev->win_size = %d\n", dev->win_size);
 
 	if(!dev->win_size) {
 		dev_err(&dev->p_dev->dev, "Cannot allocate memory window\n");
 		pcmciamtd_release(link);
 		return -ENODEV;
 	}
-	DEBUG(1, "Allocated a window of %dKiB", dev->win_size >> 10);
+	pr_debug("Allocated a window of %dKiB\n", dev->win_size >> 10);
 
 	/* Get write protect status */
-	DEBUG(2, "window handle = 0x%8.8lx", (unsigned long)link->win);
-	dev->win_base = ioremap(req.Base, req.Size);
+	dev->win_base = ioremap(link->resource[2]->start,
+				resource_size(link->resource[2]));
 	if(!dev->win_base) {
-		dev_err(&dev->p_dev->dev, "ioremap(%lu, %u) failed\n",
-			req.Base, req.Size);
+		dev_err(&dev->p_dev->dev, "ioremap(%pR) failed\n",
+			link->resource[2]);
 		pcmciamtd_release(link);
 		return -ENODEV;
 	}
-	DEBUG(1, "mapped window dev = %p req.base = 0x%lx base = %p size = 0x%x",
-	      dev, req.Base, dev->win_base, req.Size);
+	pr_debug("mapped window dev = %p @ %pR, base = %p\n",
+	      dev, link->resource[2], dev->win_base);
 
 	dev->offset = 0;
 	dev->pcmcia_map.map_priv_1 = (unsigned long)dev;
-	dev->pcmcia_map.map_priv_2 = (unsigned long)link->win;
+	dev->pcmcia_map.map_priv_2 = (unsigned long)link->resource[2];
 
 	dev->vpp = (vpp) ? vpp : link->socket->socket.Vpp;
-	link->conf.Attributes = 0;
 	if(setvpp == 2) {
-		link->conf.Vpp = dev->vpp;
+		link->vpp = dev->vpp;
 	} else {
-		link->conf.Vpp = 0;
+		link->vpp = 0;
 	}
 
-	link->conf.IntType = INT_MEMORY;
-	link->conf.ConfigIndex = 0;
-	DEBUG(2, "Setting Configuration");
-	ret = pcmcia_request_configuration(link, &link->conf);
+	link->config_index = 0;
+	pr_debug("Setting Configuration\n");
+	ret = pcmcia_enable_device(link);
 	if (ret != 0) {
 		if (dev->win_base) {
 			iounmap(dev->win_base);
@@ -597,17 +570,17 @@ static int pcmciamtd_config(struct pcmcia_device *link)
 		mtd = do_map_probe("map_rom", &dev->pcmcia_map);
 	} else {
 		for(i = 0; i < ARRAY_SIZE(probes); i++) {
-			DEBUG(1, "Trying %s", probes[i]);
+			pr_debug("Trying %s\n", probes[i]);
 			mtd = do_map_probe(probes[i], &dev->pcmcia_map);
 			if(mtd)
 				break;
 
-			DEBUG(1, "FAILED: %s", probes[i]);
+			pr_debug("FAILED: %s\n", probes[i]);
 		}
 	}
 
 	if(!mtd) {
-		DEBUG(1, "Can not find an MTD");
+		pr_debug("Can not find an MTD\n");
 		pcmciamtd_release(link);
 		return -ENODEV;
 	}
@@ -634,7 +607,7 @@ static int pcmciamtd_config(struct pcmcia_device *link)
 	/* If the memory found is fits completely into the mapped PCMCIA window,
 	   use the faster non-remapping read/write functions */
 	if(mtd->size <= dev->win_size) {
-		DEBUG(1, "Using non remapping memory functions");
+		pr_debug("Using non remapping memory functions\n");
 		dev->pcmcia_map.map_priv_2 = (unsigned long)dev->win_base;
 		if (dev->pcmcia_map.bankwidth == 1) {
 			dev->pcmcia_map.read = pcmcia_read8;
@@ -647,7 +620,7 @@ static int pcmciamtd_config(struct pcmcia_device *link)
 		dev->pcmcia_map.copy_to = pcmcia_copy_to;
 	}
 
-	if(add_mtd_device(mtd)) {
+	if (mtd_device_register(mtd, NULL, 0)) {
 		map_destroy(mtd);
 		dev->mtd_info = NULL;
 		dev_err(&dev->p_dev->dev,
@@ -657,16 +630,12 @@ static int pcmciamtd_config(struct pcmcia_device *link)
 	}
 	dev_info(&dev->p_dev->dev, "mtd%d: %s\n", mtd->index, mtd->name);
 	return 0;
-
-	dev_err(&dev->p_dev->dev, "CS Error, exiting\n");
-	pcmciamtd_release(link);
-	return -ENODEV;
 }
 
 
 static int pcmciamtd_suspend(struct pcmcia_device *dev)
 {
-	DEBUG(2, "EVENT_PM_RESUME");
+	pr_debug("EVENT_PM_RESUME\n");
 
 	/* get_lock(link); */
 
@@ -675,7 +644,7 @@ static int pcmciamtd_suspend(struct pcmcia_device *dev)
 
 static int pcmciamtd_resume(struct pcmcia_device *dev)
 {
-	DEBUG(2, "EVENT_PM_SUSPEND");
+	pr_debug("EVENT_PM_SUSPEND\n");
 
 	/* free_lock(link); */
 
@@ -683,20 +652,14 @@ static int pcmciamtd_resume(struct pcmcia_device *dev)
 }
 
 
-/* This deletes a driver "instance".  The device is de-registered
- * with Card Services.  If it has been released, all local data
- * structures are freed.  Otherwise, the structures will be freed
- * when the device is released.
- */
-
 static void pcmciamtd_detach(struct pcmcia_device *link)
 {
 	struct pcmciamtd_dev *dev = link->priv;
 
-	DEBUG(3, "link=0x%p", link);
+	pr_debug("link=0x%p\n", link);
 
 	if(dev->mtd_info) {
-		del_mtd_device(dev->mtd_info);
+		mtd_device_unregister(dev->mtd_info);
 		dev_info(&dev->p_dev->dev, "mtd%d: Removing\n",
 			 dev->mtd_info->index);
 		map_destroy(dev->mtd_info);
@@ -706,11 +669,6 @@ static void pcmciamtd_detach(struct pcmcia_device *link)
 }
 
 
-/* pcmciamtd_attach() creates an "instance" of the driver, allocating
- * local data structures for one device.  The device is registered
- * with Card Services.
- */
-
 static int pcmciamtd_probe(struct pcmcia_device *link)
 {
 	struct pcmciamtd_dev *dev;
@@ -718,18 +676,15 @@ static int pcmciamtd_probe(struct pcmcia_device *link)
 	/* Create new memory card device */
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 	if (!dev) return -ENOMEM;
-	DEBUG(1, "dev=0x%p", dev);
+	pr_debug("dev=0x%p\n", dev);
 
 	dev->p_dev = link;
 	link->priv = dev;
 
-	link->conf.Attributes = 0;
-	link->conf.IntType = INT_MEMORY;
-
 	return pcmciamtd_config(link);
 }
 
-static struct pcmcia_device_id pcmciamtd_ids[] = {
+static const struct pcmcia_device_id pcmciamtd_ids[] = {
 	PCMCIA_DEVICE_FUNC_ID(1),
 	PCMCIA_DEVICE_PROD_ID123("IO DATA", "PCS-2M", "2MB SRAM", 0x547e66dc, 0x1fed36cd, 0x36eadd21),
 	PCMCIA_DEVICE_PROD_ID12("IBM", "2MB SRAM", 0xb569a6e5, 0x36eadd21),
@@ -760,9 +715,7 @@ static struct pcmcia_device_id pcmciamtd_ids[] = {
 MODULE_DEVICE_TABLE(pcmcia, pcmciamtd_ids);
 
 static struct pcmcia_driver pcmciamtd_driver = {
-	.drv		= {
-		.name	= "pcmciamtd"
-	},
+	.name		= "pcmciamtd",
 	.probe		= pcmciamtd_probe,
 	.remove		= pcmciamtd_detach,
 	.owner		= THIS_MODULE,
@@ -774,8 +727,6 @@ static struct pcmcia_driver pcmciamtd_driver = {
 
 static int __init init_pcmciamtd(void)
 {
-	info(DRIVER_DESC);
-
 	if(bankwidth && bankwidth != 1 && bankwidth != 2) {
 		info("bad bankwidth (%d), using default", bankwidth);
 		bankwidth = 2;
@@ -794,7 +745,7 @@ static int __init init_pcmciamtd(void)
 
 static void __exit exit_pcmciamtd(void)
 {
-	DEBUG(1, DRIVER_DESC " unloading");
+	pr_debug(DRIVER_DESC " unloading");
 	pcmcia_unregister_driver(&pcmciamtd_driver);
 }
 
diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index 426461a5f0d..f73cd461257 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -27,10 +27,8 @@ struct physmap_flash_info {
 	struct mtd_info		*mtd[MAX_RESOURCES];
 	struct mtd_info		*cmtd;
 	struct map_info		map[MAX_RESOURCES];
-#ifdef CONFIG_MTD_PARTITIONS
-	int			nr_parts;
-	struct mtd_partition	*parts;
-#endif
+	spinlock_t		vpp_lock;
+	int			vpp_refcnt;
 };
 
 static int physmap_flash_remove(struct platform_device *dev)
@@ -42,56 +40,69 @@ static int physmap_flash_remove(struct platform_device *dev)
 	info = platform_get_drvdata(dev);
 	if (info == NULL)
 		return 0;
-	platform_set_drvdata(dev, NULL);
 
-	physmap_data = dev->dev.platform_data;
+	physmap_data = dev_get_platdata(&dev->dev);
 
 	if (info->cmtd) {
-#ifdef CONFIG_MTD_PARTITIONS
-		if (info->nr_parts || physmap_data->nr_parts) {
-			del_mtd_partitions(info->cmtd);
-
-			if (info->nr_parts)
-				kfree(info->parts);
-		} else {
-			del_mtd_device(info->cmtd);
-		}
-#else
-		del_mtd_device(info->cmtd);
-#endif
-#ifdef CONFIG_MTD_CONCAT
+		mtd_device_unregister(info->cmtd);
 		if (info->cmtd != info->mtd[0])
 			mtd_concat_destroy(info->cmtd);
-#endif
 	}
 
 	for (i = 0; i < MAX_RESOURCES; i++) {
 		if (info->mtd[i] != NULL)
 			map_destroy(info->mtd[i]);
 	}
+
+	if (physmap_data->exit)
+		physmap_data->exit(dev);
+
 	return 0;
 }
 
-static const char *rom_probe_types[] = {
-					"cfi_probe",
-					"jedec_probe",
-					"qinfo_probe",
-					"map_rom",
-					NULL };
-#ifdef CONFIG_MTD_PARTITIONS
-static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
-#endif
+static void physmap_set_vpp(struct map_info *map, int state)
+{
+	struct platform_device *pdev;
+	struct physmap_flash_data *physmap_data;
+	struct physmap_flash_info *info;
+	unsigned long flags;
+
+	pdev = (struct platform_device *)map->map_priv_1;
+	physmap_data = dev_get_platdata(&pdev->dev);
+
+	if (!physmap_data->set_vpp)
+		return;
+
+	info = platform_get_drvdata(pdev);
+
+	spin_lock_irqsave(&info->vpp_lock, flags);
+	if (state) {
+		if (++info->vpp_refcnt == 1)    /* first nested 'on' */
+			physmap_data->set_vpp(pdev, 1);
+	} else {
+		if (--info->vpp_refcnt == 0)    /* last nested 'off' */
+			physmap_data->set_vpp(pdev, 0);
+	}
+	spin_unlock_irqrestore(&info->vpp_lock, flags);
+}
+
+static const char * const rom_probe_types[] = {
+	"cfi_probe", "jedec_probe", "qinfo_probe", "map_rom", NULL };
+
+static const char * const part_probe_types[] = {
+	"cmdlinepart", "RedBoot", "afs", NULL };
 
 static int physmap_flash_probe(struct platform_device *dev)
 {
 	struct physmap_flash_data *physmap_data;
 	struct physmap_flash_info *info;
-	const char **probe_type;
+	const char * const *probe_type;
+	const char * const *part_types;
 	int err = 0;
 	int i;
 	int devices_found = 0;
 
-	physmap_data = dev->dev.platform_data;
+	physmap_data = dev_get_platdata(&dev->dev);
 	if (physmap_data == NULL)
 		return -ENODEV;
 
@@ -102,16 +113,22 @@ static int physmap_flash_probe(struct platform_device *dev)
 		goto err_out;
 	}
 
+	if (physmap_data->init) {
+		err = physmap_data->init(dev);
+		if (err)
+			goto err_out;
+	}
+
 	platform_set_drvdata(dev, info);
 
 	for (i = 0; i < dev->num_resources; i++) {
 		printk(KERN_NOTICE "physmap platform flash device: %.8llx at %.8llx\n",
-		       (unsigned long long)(dev->resource[i].end - dev->resource[i].start + 1),
+		       (unsigned long long)resource_size(&dev->resource[i]),
 		       (unsigned long long)dev->resource[i].start);
 
 		if (!devm_request_mem_region(&dev->dev,
 			dev->resource[i].start,
-			dev->resource[i].end - dev->resource[i].start + 1,
+			resource_size(&dev->resource[i]),
 			dev_name(&dev->dev))) {
 			dev_err(&dev->dev, "Could not reserve memory region\n");
 			err = -ENOMEM;
@@ -120,10 +137,11 @@ static int physmap_flash_probe(struct platform_device *dev)
 
 		info->map[i].name = dev_name(&dev->dev);
 		info->map[i].phys = dev->resource[i].start;
-		info->map[i].size = dev->resource[i].end - dev->resource[i].start + 1;
+		info->map[i].size = resource_size(&dev->resource[i]);
 		info->map[i].bankwidth = physmap_data->width;
-		info->map[i].set_vpp = physmap_data->set_vpp;
+		info->map[i].set_vpp = physmap_set_vpp;
 		info->map[i].pfow_base = physmap_data->pfow_base;
+		info->map[i].map_priv_1 = (unsigned long)dev;
 
 		info->map[i].virt = devm_ioremap(&dev->dev, info->map[i].phys,
 						 info->map[i].size);
@@ -136,8 +154,12 @@ static int physmap_flash_probe(struct platform_device *dev)
 		simple_map_init(&info->map[i]);
 
 		probe_type = rom_probe_types;
-		for (; info->mtd[i] == NULL && *probe_type != NULL; probe_type++)
-			info->mtd[i] = do_map_probe(*probe_type, &info->map[i]);
+		if (physmap_data->probe_type == NULL) {
+			for (; info->mtd[i] == NULL && *probe_type != NULL; probe_type++)
+				info->mtd[i] = do_map_probe(*probe_type, &info->map[i]);
+		} else
+			info->mtd[i] = do_map_probe(physmap_data->probe_type, &info->map[i]);
+
 		if (info->mtd[i] == NULL) {
 			dev_err(&dev->dev, "map_probe failed\n");
 			err = -ENXIO;
@@ -155,37 +177,19 @@ static int physmap_flash_probe(struct platform_device *dev)
 		/*
 		 * We detected multiple devices. Concatenate them together.
 		 */
-#ifdef CONFIG_MTD_CONCAT
 		info->cmtd = mtd_concat_create(info->mtd, devices_found, dev_name(&dev->dev));
 		if (info->cmtd == NULL)
 			err = -ENXIO;
-#else
-		printk(KERN_ERR "physmap-flash: multiple devices "
-		       "found but MTD concat support disabled.\n");
-		err = -ENXIO;
-#endif
 	}
 	if (err)
 		goto err_out;
 
-#ifdef CONFIG_MTD_PARTITIONS
-	err = parse_mtd_partitions(info->cmtd, part_probe_types,
-				&info->parts, 0);
-	if (err > 0) {
-		add_mtd_partitions(info->cmtd, info->parts, err);
-		info->nr_parts = err;
-		return 0;
-	}
+	spin_lock_init(&info->vpp_lock);
 
-	if (physmap_data->nr_parts) {
-		printk(KERN_NOTICE "Using physmap partition information\n");
-		add_mtd_partitions(info->cmtd, physmap_data->parts,
-				   physmap_data->nr_parts);
-		return 0;
-	}
-#endif
+	part_types = physmap_data->part_probe_types ? : part_probe_types;
 
-	add_mtd_device(info->cmtd);
+	mtd_device_parse_register(info->cmtd, part_types, NULL,
+				  physmap_data->parts, physmap_data->nr_parts);
 	return 0;
 
 err_out:
@@ -200,9 +204,8 @@ static void physmap_flash_shutdown(struct platform_device *dev)
 	int i;
 
 	for (i = 0; i < MAX_RESOURCES && info->mtd[i]; i++)
-		if (info->mtd[i]->suspend && info->mtd[i]->resume)
-			if (info->mtd[i]->suspend(info->mtd[i]) == 0)
-				info->mtd[i]->resume(info->mtd[i]);
+		if (mtd_suspend(info->mtd[i]) == 0)
+			mtd_resume(info->mtd[i]);
 }
 #else
 #define physmap_flash_shutdown NULL
@@ -239,23 +242,6 @@ static struct platform_device physmap_flash = {
 	.num_resources	= 1,
 	.resource	= &physmap_flash_resource,
 };
-
-void physmap_configure(unsigned long addr, unsigned long size,
-		int bankwidth, void (*set_vpp)(struct map_info *, int))
-{
-	physmap_flash_resource.start = addr;
-	physmap_flash_resource.end = addr + size - 1;
-	physmap_flash_data.width = bankwidth;
-	physmap_flash_data.set_vpp = set_vpp;
-}
-
-#ifdef CONFIG_MTD_PARTITIONS
-void physmap_set_partitions(struct mtd_partition *parts, int num_parts)
-{
-	physmap_flash_data.nr_parts = num_parts;
-	physmap_flash_data.parts = parts;
-}
-#endif
 #endif
 
 static int __init physmap_init(void)
diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c
index ba124baa646..217c25d7381 100644
--- a/drivers/mtd/maps/physmap_of.c
+++ b/drivers/mtd/maps/physmap_of.c
@@ -15,13 +15,13 @@
 
 #include <linux/module.h>
 #include <linux/types.h>
-#include <linux/init.h>
 #include <linux/device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/concat.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/slab.h>
 
@@ -33,67 +33,11 @@ struct of_flash_list {
 
 struct of_flash {
 	struct mtd_info		*cmtd;
-#ifdef CONFIG_MTD_PARTITIONS
-	struct mtd_partition	*parts;
-#endif
 	int list_size; /* number of elements in of_flash_list */
 	struct of_flash_list	list[0];
 };
 
-#ifdef CONFIG_MTD_PARTITIONS
-#define OF_FLASH_PARTS(info)	((info)->parts)
-
-static int parse_obsolete_partitions(struct of_device *dev,
-				     struct of_flash *info,
-				     struct device_node *dp)
-{
-	int i, plen, nr_parts;
-	const struct {
-		u32 offset, len;
-	} *part;
-	const char *names;
-
-	part = of_get_property(dp, "partitions", &plen);
-	if (!part)
-		return 0; /* No partitions found */
-
-	dev_warn(&dev->dev, "Device tree uses obsolete partition map binding\n");
-
-	nr_parts = plen / sizeof(part[0]);
-
-	info->parts = kzalloc(nr_parts * sizeof(*info->parts), GFP_KERNEL);
-	if (!info->parts)
-		return -ENOMEM;
-
-	names = of_get_property(dp, "partition-names", &plen);
-
-	for (i = 0; i < nr_parts; i++) {
-		info->parts[i].offset = part->offset;
-		info->parts[i].size   = part->len & ~1;
-		if (part->len & 1) /* bit 0 set signifies read only partition */
-			info->parts[i].mask_flags = MTD_WRITEABLE;
-
-		if (names && (plen > 0)) {
-			int len = strlen(names) + 1;
-
-			info->parts[i].name = (char *)names;
-			plen -= len;
-			names += len;
-		} else {
-			info->parts[i].name = "unnamed";
-		}
-
-		part++;
-	}
-
-	return nr_parts;
-}
-#else /* MTD_PARTITIONS */
-#define	OF_FLASH_PARTS(info)		(0)
-#define parse_partitions(info, dev)	(0)
-#endif /* MTD_PARTITIONS */
-
-static int of_flash_remove(struct of_device *dev)
+static int of_flash_remove(struct platform_device *dev)
 {
 	struct of_flash *info;
 	int i;
@@ -103,21 +47,13 @@ static int of_flash_remove(struct of_device *dev)
 		return 0;
 	dev_set_drvdata(&dev->dev, NULL);
 
-#ifdef CONFIG_MTD_CONCAT
 	if (info->cmtd != info->list[0].mtd) {
-		del_mtd_device(info->cmtd);
+		mtd_device_unregister(info->cmtd);
 		mtd_concat_destroy(info->cmtd);
 	}
-#endif
 
-	if (info->cmtd) {
-		if (OF_FLASH_PARTS(info)) {
-			del_mtd_partitions(info->cmtd);
-			kfree(OF_FLASH_PARTS(info));
-		} else {
-			del_mtd_device(info->cmtd);
-		}
-	}
+	if (info->cmtd)
+		mtd_device_unregister(info->cmtd);
 
 	for (i = 0; i < info->list_size; i++) {
 		if (info->list[i].mtd)
@@ -131,23 +67,21 @@ static int of_flash_remove(struct of_device *dev)
 			kfree(info->list[i].res);
 		}
 	}
-
-	kfree(info);
-
 	return 0;
 }
 
+static const char * const rom_probe_types[] = {
+	"cfi_probe", "jedec_probe", "map_rom" };
+
 /* Helper function to handle probing of the obsolete "direct-mapped"
  * compatible binding, which has an extra "probe-type" property
  * describing the type of flash probe necessary. */
-static struct mtd_info * __devinit obsolete_probe(struct of_device *dev,
-						  struct map_info *map)
+static struct mtd_info *obsolete_probe(struct platform_device *dev,
+				       struct map_info *map)
 {
 	struct device_node *dp = dev->dev.of_node;
 	const char *of_probe;
 	struct mtd_info *mtd;
-	static const char *rom_probe_types[]
-		= { "cfi_probe", "jedec_probe", "map_rom"};
 	int i;
 
 	dev_warn(&dev->dev, "Device tree uses obsolete \"direct-mapped\" "
@@ -173,13 +107,14 @@ static struct mtd_info * __devinit obsolete_probe(struct of_device *dev,
 	}
 }
 
-#ifdef CONFIG_MTD_PARTITIONS
 /* When partitions are set we look for a linux,part-probe property which
    specifies the list of partition probers to use. If none is given then the
    default is use. These take precedence over other device tree
    information. */
-static const char *part_probe_types_def[] = { "cmdlinepart", "RedBoot", NULL };
-static const char ** __devinit of_get_probes(struct device_node *dp)
+static const char * const part_probe_types_def[] = {
+	"cmdlinepart", "RedBoot", "ofpart", "ofoldpart", NULL };
+
+static const char * const *of_get_probes(struct device_node *dp)
 {
 	const char *cp;
 	int cplen;
@@ -208,34 +143,42 @@ static const char ** __devinit of_get_probes(struct device_node *dp)
 	return res;
 }
 
-static void __devinit of_free_probes(const char **probes)
+static void of_free_probes(const char * const *probes)
 {
 	if (probes != part_probe_types_def)
 		kfree(probes);
 }
-#endif
 
-static int __devinit of_flash_probe(struct of_device *dev,
-				    const struct of_device_id *match)
+static struct of_device_id of_flash_match[];
+static int of_flash_probe(struct platform_device *dev)
 {
-#ifdef CONFIG_MTD_PARTITIONS
-	const char **part_probe_types;
-#endif
+	const char * const *part_probe_types;
+	const struct of_device_id *match;
 	struct device_node *dp = dev->dev.of_node;
 	struct resource res;
 	struct of_flash *info;
-	const char *probe_type = match->data;
-	const u32 *width;
+	const char *probe_type;
+	const __be32 *width;
 	int err;
 	int i;
 	int count;
-	const u32 *p;
+	const __be32 *p;
 	int reg_tuple_size;
 	struct mtd_info **mtd_list = NULL;
 	resource_size_t res_size;
+	struct mtd_part_parser_data ppdata;
+	bool map_indirect;
+	const char *mtd_name = NULL;
+
+	match = of_match_device(of_flash_match, &dev->dev);
+	if (!match)
+		return -EINVAL;
+	probe_type = match->data;
 
 	reg_tuple_size = (of_n_addr_cells(dp) + of_n_size_cells(dp)) * sizeof(u32);
 
+	of_property_read_string(dp, "linux,mtd-name", &mtd_name);
+
 	/*
 	 * Get number of "reg" tuples. Scan for MTD devices on area's
 	 * described by each "reg" region. This makes it possible (including
@@ -251,9 +194,12 @@ static int __devinit of_flash_probe(struct of_device *dev,
 	}
 	count /= reg_tuple_size;
 
+	map_indirect = of_property_read_bool(dp, "no-unaligned-direct-access");
+
 	err = -ENOMEM;
-	info = kzalloc(sizeof(struct of_flash) +
-		       sizeof(struct of_flash_list) * count, GFP_KERNEL);
+	info = devm_kzalloc(&dev->dev,
+			    sizeof(struct of_flash) +
+			    sizeof(struct of_flash_list) * count, GFP_KERNEL);
 	if (!info)
 		goto err_flash_remove;
 
@@ -266,14 +212,14 @@ static int __devinit of_flash_probe(struct of_device *dev,
 	for (i = 0; i < count; i++) {
 		err = -ENXIO;
 		if (of_address_to_resource(dp, i, &res)) {
-			dev_err(&dev->dev, "Can't get IO address from device"
-				" tree\n");
-			goto err_out;
+			/*
+			 * Continue with next register tuple if this
+			 * one is not mappable
+			 */
+			continue;
 		}
 
-		dev_dbg(&dev->dev, "of_flash device: %.8llx-%.8llx\n",
-			(unsigned long long)res.start,
-			(unsigned long long)res.end);
+		dev_dbg(&dev->dev, "of_flash device: %pR\n", &res);
 
 		err = -EBUSY;
 		res_size = resource_size(&res);
@@ -290,10 +236,11 @@ static int __devinit of_flash_probe(struct of_device *dev,
 			goto err_out;
 		}
 
-		info->list[i].map.name = dev_name(&dev->dev);
+		info->list[i].map.name = mtd_name ?: dev_name(&dev->dev);
 		info->list[i].map.phys = res.start;
 		info->list[i].map.size = res_size;
-		info->list[i].map.bankwidth = *width;
+		info->list[i].map.bankwidth = be32_to_cpup(width);
+		info->list[i].map.device_node = dp;
 
 		err = -ENOMEM;
 		info->list[i].map.virt = ioremap(info->list[i].map.phys,
@@ -306,6 +253,17 @@ static int __devinit of_flash_probe(struct of_device *dev,
 
 		simple_map_init(&info->list[i].map);
 
+		/*
+		 * On some platforms (e.g. MPC5200) a direct 1:1 mapping
+		 * may cause problems with JFFS2 usage, as the local bus (LPB)
+		 * doesn't support unaligned accesses as implemented in the
+		 * JFFS2 code via memcpy(). By setting NO_XIP, the
+		 * flash will not be exposed directly to the MTD users
+		 * (e.g. JFFS2) any more.
+		 */
+		if (map_indirect)
+			info->list[i].map.phys = NO_XIP;
+
 		if (probe_type) {
 			info->list[i].mtd = do_map_probe(probe_type,
 							 &info->list[i].map);
@@ -327,56 +285,28 @@ static int __devinit of_flash_probe(struct of_device *dev,
 	}
 
 	err = 0;
+	info->cmtd = NULL;
 	if (info->list_size == 1) {
 		info->cmtd = info->list[0].mtd;
 	} else if (info->list_size > 1) {
 		/*
 		 * We detected multiple devices. Concatenate them together.
 		 */
-#ifdef CONFIG_MTD_CONCAT
 		info->cmtd = mtd_concat_create(mtd_list, info->list_size,
 					       dev_name(&dev->dev));
-		if (info->cmtd == NULL)
-			err = -ENXIO;
-#else
-		printk(KERN_ERR "physmap_of: multiple devices "
-		       "found but MTD concat support disabled.\n");
-		err = -ENXIO;
-#endif
 	}
+	if (info->cmtd == NULL)
+		err = -ENXIO;
+
 	if (err)
 		goto err_out;
 
-#ifdef CONFIG_MTD_PARTITIONS
+	ppdata.of_node = dp;
 	part_probe_types = of_get_probes(dp);
-	err = parse_mtd_partitions(info->cmtd, part_probe_types,
-				   &info->parts, 0);
-	if (err < 0) {
-		of_free_probes(part_probe_types);
-		return err;
-	}
+	mtd_device_parse_register(info->cmtd, part_probe_types, &ppdata,
+			NULL, 0);
 	of_free_probes(part_probe_types);
 
-#ifdef CONFIG_MTD_OF_PARTS
-	if (err == 0) {
-		err = of_mtd_parse_partitions(&dev->dev, dp, &info->parts);
-		if (err < 0)
-			return err;
-	}
-#endif
-
-	if (err == 0) {
-		err = parse_obsolete_partitions(dev, info, dp);
-		if (err < 0)
-			return err;
-	}
-
-	if (err > 0)
-		add_mtd_partitions(info->cmtd, info->parts, err);
-	else
-#endif
-		add_mtd_device(info->cmtd);
-
 	kfree(mtd_list);
 
 	return 0;
@@ -417,7 +347,7 @@ static struct of_device_id of_flash_match[] = {
 };
 MODULE_DEVICE_TABLE(of, of_flash_match);
 
-static struct of_platform_driver of_flash_driver = {
+static struct platform_driver of_flash_driver = {
 	.driver = {
 		.name = "of-flash",
 		.owner = THIS_MODULE,
@@ -427,18 +357,7 @@ static struct of_platform_driver of_flash_driver = {
 	.remove		= of_flash_remove,
 };
 
-static int __init of_flash_init(void)
-{
-	return of_register_platform_driver(&of_flash_driver);
-}
-
-static void __exit of_flash_exit(void)
-{
-	of_unregister_platform_driver(&of_flash_driver);
-}
-
-module_init(of_flash_init);
-module_exit(of_flash_exit);
+module_platform_driver(of_flash_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Vitaly Wool <vwool@ru.mvista.com>");
diff --git a/drivers/mtd/maps/pismo.c b/drivers/mtd/maps/pismo.c
index f4ce273e93f..dc6df9abea0 100644
--- a/drivers/mtd/maps/pismo.c
+++ b/drivers/mtd/maps/pismo.c
@@ -50,41 +50,15 @@ struct pismo_data {
 	struct platform_device	*dev[PISMO_NUM_CS];
 };
 
-/* FIXME: set_vpp could do with a better calling convention */
-static struct pismo_data *vpp_pismo;
-static DEFINE_MUTEX(pismo_mutex);
-
-static int pismo_setvpp_probe_fix(struct pismo_data *pismo)
+static void pismo_set_vpp(struct platform_device *pdev, int on)
 {
-	mutex_lock(&pismo_mutex);
-	if (vpp_pismo) {
-		mutex_unlock(&pismo_mutex);
-		kfree(pismo);
-		return -EBUSY;
-	}
-	vpp_pismo = pismo;
-	mutex_unlock(&pismo_mutex);
-	return 0;
-}
-
-static void pismo_setvpp_remove_fix(struct pismo_data *pismo)
-{
-	mutex_lock(&pismo_mutex);
-	if (vpp_pismo == pismo)
-		vpp_pismo = NULL;
-	mutex_unlock(&pismo_mutex);
-}
-
-static void pismo_set_vpp(struct map_info *map, int on)
-{
-	struct pismo_data *pismo = vpp_pismo;
+	struct i2c_client *client = to_i2c_client(pdev->dev.parent);
+	struct pismo_data *pismo = i2c_get_clientdata(client);
 
 	pismo->vpp(pismo->vpp_data, on);
 }
-/* end of hack */
 
-
-static unsigned int __devinit pismo_width_to_bytes(unsigned int width)
+static unsigned int pismo_width_to_bytes(unsigned int width)
 {
 	width &= 15;
 	if (width > 2)
@@ -92,8 +66,8 @@ static unsigned int __devinit pismo_width_to_bytes(unsigned int width)
 	return 1 << width;
 }
 
-static int __devinit pismo_eeprom_read(struct i2c_client *client, void *buf,
-	u8 addr, size_t size)
+static int pismo_eeprom_read(struct i2c_client *client, void *buf, u8 addr,
+			     size_t size)
 {
 	int ret;
 	struct i2c_msg msg[] = {
@@ -114,8 +88,9 @@ static int __devinit pismo_eeprom_read(struct i2c_client *client, void *buf,
 	return ret == ARRAY_SIZE(msg) ? size : -EIO;
 }
 
-static int __devinit pismo_add_device(struct pismo_data *pismo, int i,
-	struct pismo_mem *region, const char *name, void *pdata, size_t psize)
+static int pismo_add_device(struct pismo_data *pismo, int i,
+			    struct pismo_mem *region, const char *name,
+			    void *pdata, size_t psize)
 {
 	struct platform_device *dev;
 	struct resource res = { };
@@ -155,8 +130,8 @@ static int __devinit pismo_add_device(struct pismo_data *pismo, int i,
 	return ret;
 }
 
-static int __devinit pismo_add_nor(struct pismo_data *pismo, int i,
-	struct pismo_mem *region)
+static int pismo_add_nor(struct pismo_data *pismo, int i,
+			 struct pismo_mem *region)
 {
 	struct physmap_flash_data data = {
 		.width = region->width,
@@ -169,8 +144,8 @@ static int __devinit pismo_add_nor(struct pismo_data *pismo, int i,
 		&data, sizeof(data));
 }
 
-static int __devinit pismo_add_sram(struct pismo_data *pismo, int i,
-	struct pismo_mem *region)
+static int pismo_add_sram(struct pismo_data *pismo, int i,
+			  struct pismo_mem *region)
 {
 	struct platdata_mtd_ram data = {
 		.bankwidth = region->width,
@@ -180,8 +155,8 @@ static int __devinit pismo_add_sram(struct pismo_data *pismo, int i,
 		&data, sizeof(data));
 }
 
-static void __devinit pismo_add_one(struct pismo_data *pismo, int i,
-	const struct pismo_cs_block *cs, phys_addr_t base)
+static void pismo_add_one(struct pismo_data *pismo, int i,
+			  const struct pismo_cs_block *cs, phys_addr_t base)
 {
 	struct device *dev = &pismo->client->dev;
 	struct pismo_mem region;
@@ -223,7 +198,7 @@ static void __devinit pismo_add_one(struct pismo_data *pismo, int i,
 	}
 }
 
-static int __devexit pismo_remove(struct i2c_client *client)
+static int pismo_remove(struct i2c_client *client)
 {
 	struct pismo_data *pismo = i2c_get_clientdata(client);
 	int i;
@@ -231,16 +206,13 @@ static int __devexit pismo_remove(struct i2c_client *client)
 	for (i = 0; i < ARRAY_SIZE(pismo->dev); i++)
 		platform_device_unregister(pismo->dev[i]);
 
-	/* FIXME: set_vpp needs saner arguments */
-	pismo_setvpp_remove_fix(pismo);
-
 	kfree(pismo);
 
 	return 0;
 }
 
-static int __devinit pismo_probe(struct i2c_client *client,
-				 const struct i2c_device_id *id)
+static int pismo_probe(struct i2c_client *client,
+		       const struct i2c_device_id *id)
 {
 	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
 	struct pismo_pdata *pdata = client->dev.platform_data;
@@ -257,11 +229,6 @@ static int __devinit pismo_probe(struct i2c_client *client,
 	if (!pismo)
 		return -ENOMEM;
 
-	/* FIXME: set_vpp needs saner arguments */
-	ret = pismo_setvpp_probe_fix(pismo);
-	if (ret)
-		return ret;
-
 	pismo->client = client;
 	if (pdata) {
 		pismo->vpp = pdata->set_vpp;
@@ -301,7 +268,7 @@ static struct i2c_driver pismo_driver = {
 		.owner	= THIS_MODULE,
 	},
 	.probe		= pismo_probe,
-	.remove		= __devexit_p(pismo_remove),
+	.remove		= pismo_remove,
 	.id_table	= pismo_id,
 };
 
diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c
index 76a76be5a7b..d597e89f269 100644
--- a/drivers/mtd/maps/plat-ram.c
+++ b/drivers/mtd/maps/plat-ram.c
@@ -23,7 +23,6 @@
 
 #include <linux/module.h>
 #include <linux/types.h>
-#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/ioport.h>
@@ -44,8 +43,6 @@ struct platram_info {
 	struct device		*dev;
 	struct mtd_info		*mtd;
 	struct map_info		 map;
-	struct mtd_partition	*partitions;
-	bool			free_partitions;
 	struct resource		*area;
 	struct platdata_mtd_ram	*pdata;
 };
@@ -57,7 +54,7 @@ struct platram_info {
 
 static inline struct platram_info *to_platram_info(struct platform_device *dev)
 {
-	return (struct platram_info *)platform_get_drvdata(dev);
+	return platform_get_drvdata(dev);
 }
 
 /* platram_setrw
@@ -86,22 +83,13 @@ static int platram_remove(struct platform_device *pdev)
 {
 	struct platram_info *info = to_platram_info(pdev);
 
-	platform_set_drvdata(pdev, NULL);
-
 	dev_dbg(&pdev->dev, "removing device\n");
 
 	if (info == NULL)
 		return 0;
 
 	if (info->mtd) {
-#ifdef CONFIG_MTD_PARTITIONS
-		if (info->partitions) {
-			del_mtd_partitions(info->mtd);
-			if (info->free_partitions)
-				kfree(info->partitions);
-		}
-#endif
-		del_mtd_device(info->mtd);
+		mtd_device_unregister(info->mtd);
 		map_destroy(info->mtd);
 	}
 
@@ -139,17 +127,16 @@ static int platram_probe(struct platform_device *pdev)
 
 	dev_dbg(&pdev->dev, "probe entered\n");
 
-	if (pdev->dev.platform_data == NULL) {
+	if (dev_get_platdata(&pdev->dev) == NULL) {
 		dev_err(&pdev->dev, "no platform data supplied\n");
 		err = -ENOENT;
 		goto exit_error;
 	}
 
-	pdata = pdev->dev.platform_data;
+	pdata = dev_get_platdata(&pdev->dev);
 
 	info = kzalloc(sizeof(*info), GFP_KERNEL);
 	if (info == NULL) {
-		dev_err(&pdev->dev, "no memory for flash info\n");
 		err = -ENOMEM;
 		goto exit_error;
 	}
@@ -208,7 +195,7 @@ static int platram_probe(struct platform_device *pdev)
 	 * supplied by the platform_data struct */
 
 	if (pdata->map_probes) {
-		const char **map_probes = pdata->map_probes;
+		const char * const *map_probes = pdata->map_probes;
 
 		for ( ; !info->mtd && *map_probes; map_probes++)
 			info->mtd = do_map_probe(*map_probes , &info->map);
@@ -228,35 +215,24 @@ static int platram_probe(struct platform_device *pdev)
 
 	platram_setrw(info, PLATRAM_RW);
 
-	/* check to see if there are any available partitions, or wether
+	/* check to see if there are any available partitions, or whether
 	 * to add this device whole */
 
-#ifdef CONFIG_MTD_PARTITIONS
-	if (!pdata->nr_partitions) {
-		/* try to probe using the supplied probe type */
-		if (pdata->probes) {
-			err = parse_mtd_partitions(info->mtd, pdata->probes,
-					   &info->partitions, 0);
-			info->free_partitions = 1;
-			if (err > 0)
-				err = add_mtd_partitions(info->mtd,
-					info->partitions, err);
-		}
-	}
-	/* use the static mapping */
-	else
-		err = add_mtd_partitions(info->mtd, pdata->partitions,
-				pdata->nr_partitions);
-#endif /* CONFIG_MTD_PARTITIONS */
-
-	if (add_mtd_device(info->mtd)) {
-		dev_err(&pdev->dev, "add_mtd_device() failed\n");
-		err = -ENOMEM;
-	}
-
+	err = mtd_device_parse_register(info->mtd, pdata->probes, NULL,
+					pdata->partitions,
+					pdata->nr_partitions);
 	if (!err)
 		dev_info(&pdev->dev, "registered mtd device\n");
 
+	if (pdata->nr_partitions) {
+		/* add the whole device. */
+		err = mtd_device_register(info->mtd, NULL, 0);
+		if (err) {
+			dev_err(&pdev->dev,
+				"failed to register the entire device\n");
+		}
+	}
+
 	return err;
 
  exit_free:
@@ -279,21 +255,7 @@ static struct platform_driver platram_driver = {
 	},
 };
 
-/* module init/exit */
-
-static int __init platram_init(void)
-{
-	printk("Generic platform RAM MTD, (c) 2004 Simtec Electronics\n");
-	return platform_driver_register(&platram_driver);
-}
-
-static void __exit platram_exit(void)
-{
-	platform_driver_unregister(&platram_driver);
-}
-
-module_init(platram_init);
-module_exit(platram_exit);
+module_platform_driver(platram_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
diff --git a/drivers/mtd/maps/pmcmsp-flash.c b/drivers/mtd/maps/pmcmsp-flash.c
index acb13fa5001..744ca5cacc9 100644
--- a/drivers/mtd/maps/pmcmsp-flash.c
+++ b/drivers/mtd/maps/pmcmsp-flash.c
@@ -3,7 +3,7 @@
  * Config with both CFI and JEDEC device support.
  *
  * Basically physmap.c with the addition of partitions and
- * an array of mapping info to accomodate more than one flash type per board.
+ * an array of mapping info to accommodate more than one flash type per board.
  *
  * Copyright 2005-2007 PMC-Sierra, Inc.
  *
@@ -173,7 +173,7 @@ static int __init init_msp_flash(void)
 		msp_flash[i] = do_map_probe("cfi_probe", &msp_maps[i]);
 		if (msp_flash[i]) {
 			msp_flash[i]->owner = THIS_MODULE;
-			add_mtd_partitions(msp_flash[i], msp_parts[i], pcnt);
+			mtd_device_register(msp_flash[i], msp_parts[i], pcnt);
 		} else {
 			printk(KERN_ERR "map probe failed for flash\n");
 			ret = -ENXIO;
@@ -188,7 +188,7 @@ static int __init init_msp_flash(void)
 
 cleanup_loop:
 	while (i--) {
-		del_mtd_partitions(msp_flash[i]);
+		mtd_device_unregister(msp_flash[i]);
 		map_destroy(msp_flash[i]);
 		kfree(msp_maps[i].name);
 		iounmap(msp_maps[i].virt);
@@ -207,7 +207,7 @@ static void __exit cleanup_msp_flash(void)
 	int i;
 
 	for (i = 0; i < fcnt; i++) {
-		del_mtd_partitions(msp_flash[i]);
+		mtd_device_unregister(msp_flash[i]);
 		map_destroy(msp_flash[i]);
 		iounmap((void *)msp_maps[i].virt);
 
diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c
index dd90880048c..cb4d92eea9f 100644
--- a/drivers/mtd/maps/pxa2xx-flash.c
+++ b/drivers/mtd/maps/pxa2xx-flash.c
@@ -13,7 +13,6 @@
 #include <linux/types.h>
 #include <linux/slab.h>
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
@@ -41,23 +40,17 @@ static void pxa2xx_map_inval_cache(struct map_info *map, unsigned long from,
 }
 
 struct pxa2xx_flash_info {
-	struct mtd_partition	*parts;
-	int			nr_parts;
 	struct mtd_info		*mtd;
 	struct map_info		map;
 };
 
+static const char * const probes[] = { "RedBoot", "cmdlinepart", NULL };
 
-static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
-
-
-static int __init pxa2xx_flash_probe(struct platform_device *pdev)
+static int pxa2xx_flash_probe(struct platform_device *pdev)
 {
-	struct flash_platform_data *flash = pdev->dev.platform_data;
+	struct flash_platform_data *flash = dev_get_platdata(&pdev->dev);
 	struct pxa2xx_flash_info *info;
-	struct mtd_partition *parts;
 	struct resource *res;
-	int ret = 0;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res)
@@ -67,12 +60,10 @@ static int __init pxa2xx_flash_probe(struct platform_device *pdev)
 	if (!info)
 		return -ENOMEM;
 
-	info->map.name = (char *) flash->name;
+	info->map.name = flash->name;
 	info->map.bankwidth = flash->width;
 	info->map.phys = res->start;
-	info->map.size = res->end - res->start + 1;
-	info->parts = flash->parts;
-	info->nr_parts = flash->nr_parts;
+	info->map.size = resource_size(res);
 
 	info->map.virt = ioremap(info->map.phys, info->map.size);
 	if (!info->map.virt) {
@@ -81,7 +72,7 @@ static int __init pxa2xx_flash_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 	info->map.cached =
-		ioremap_cached(info->map.phys, info->map.size);
+		ioremap_cache(info->map.phys, info->map.size);
 	if (!info->map.cached)
 		printk(KERN_WARNING "Failed to ioremap cached %s\n",
 		       info->map.name);
@@ -104,46 +95,23 @@ static int __init pxa2xx_flash_probe(struct platform_device *pdev)
 	}
 	info->mtd->owner = THIS_MODULE;
 
-#ifdef CONFIG_MTD_PARTITIONS
-	ret = parse_mtd_partitions(info->mtd, probes, &parts, 0);
-
-	if (ret > 0) {
-		info->nr_parts = ret;
-		info->parts = parts;
-	}
-#endif
-
-	if (info->nr_parts) {
-		add_mtd_partitions(info->mtd, info->parts,
-				   info->nr_parts);
-	} else {
-		printk("Registering %s as whole device\n",
-		       info->map.name);
-		add_mtd_device(info->mtd);
-	}
+	mtd_device_parse_register(info->mtd, probes, NULL, flash->parts,
+				  flash->nr_parts);
 
 	platform_set_drvdata(pdev, info);
 	return 0;
 }
 
-static int __devexit pxa2xx_flash_remove(struct platform_device *dev)
+static int pxa2xx_flash_remove(struct platform_device *dev)
 {
 	struct pxa2xx_flash_info *info = platform_get_drvdata(dev);
 
-	platform_set_drvdata(dev, NULL);
-
-#ifdef CONFIG_MTD_PARTITIONS
-	if (info->nr_parts)
-		del_mtd_partitions(info->mtd);
-	else
-#endif
-		del_mtd_device(info->mtd);
+	mtd_device_unregister(info->mtd);
 
 	map_destroy(info->mtd);
 	iounmap(info->map.virt);
 	if (info->map.cached)
 		iounmap(info->map.cached);
-	kfree(info->parts);
 	kfree(info);
 	return 0;
 }
@@ -153,8 +121,8 @@ static void pxa2xx_flash_shutdown(struct platform_device *dev)
 {
 	struct pxa2xx_flash_info *info = platform_get_drvdata(dev);
 
-	if (info && info->mtd->suspend(info->mtd) == 0)
-		info->mtd->resume(info->mtd);
+	if (info && mtd_suspend(info->mtd) == 0)
+		mtd_resume(info->mtd);
 }
 #else
 #define pxa2xx_flash_shutdown NULL
@@ -166,22 +134,11 @@ static struct platform_driver pxa2xx_flash_driver = {
 		.owner		= THIS_MODULE,
 	},
 	.probe		= pxa2xx_flash_probe,
-	.remove		= __devexit_p(pxa2xx_flash_remove),
+	.remove		= pxa2xx_flash_remove,
 	.shutdown	= pxa2xx_flash_shutdown,
 };
 
-static int __init init_pxa2xx_flash(void)
-{
-	return platform_driver_register(&pxa2xx_flash_driver);
-}
-
-static void __exit cleanup_pxa2xx_flash(void)
-{
-	platform_driver_unregister(&pxa2xx_flash_driver);
-}
-
-module_init(init_pxa2xx_flash);
-module_exit(cleanup_pxa2xx_flash);
+module_platform_driver(pxa2xx_flash_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Nicolas Pitre <nico@fluxnic.net>");
diff --git a/drivers/mtd/maps/rbtx4939-flash.c b/drivers/mtd/maps/rbtx4939-flash.c
index 83ed64512c5..146b6047ed2 100644
--- a/drivers/mtd/maps/rbtx4939-flash.c
+++ b/drivers/mtd/maps/rbtx4939-flash.c
@@ -13,7 +13,6 @@
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
@@ -25,10 +24,6 @@
 struct rbtx4939_flash_info {
 	struct mtd_info *mtd;
 	struct map_info map;
-#ifdef CONFIG_MTD_PARTITIONS
-	int nr_parts;
-	struct mtd_partition *parts;
-#endif
 };
 
 static int rbtx4939_flash_remove(struct platform_device *dev)
@@ -38,42 +33,29 @@ static int rbtx4939_flash_remove(struct platform_device *dev)
 	info = platform_get_drvdata(dev);
 	if (!info)
 		return 0;
-	platform_set_drvdata(dev, NULL);
 
 	if (info->mtd) {
-#ifdef CONFIG_MTD_PARTITIONS
-		struct rbtx4939_flash_data *pdata = dev->dev.platform_data;
-
-		if (info->nr_parts) {
-			del_mtd_partitions(info->mtd);
-			kfree(info->parts);
-		} else if (pdata->nr_parts)
-			del_mtd_partitions(info->mtd);
-		else
-			del_mtd_device(info->mtd);
-#else
-		del_mtd_device(info->mtd);
-#endif
+		struct rbtx4939_flash_data *pdata = dev_get_platdata(&dev->dev);
+
+		mtd_device_unregister(info->mtd);
 		map_destroy(info->mtd);
 	}
 	return 0;
 }
 
-static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL };
-#ifdef CONFIG_MTD_PARTITIONS
-static const char *part_probe_types[] = { "cmdlinepart", NULL };
-#endif
+static const char * const rom_probe_types[] = {
+	"cfi_probe", "jedec_probe", NULL };
 
 static int rbtx4939_flash_probe(struct platform_device *dev)
 {
 	struct rbtx4939_flash_data *pdata;
 	struct rbtx4939_flash_info *info;
 	struct resource *res;
-	const char **probe_type;
+	const char * const *probe_type;
 	int err = 0;
 	unsigned long size;
 
-	pdata = dev->dev.platform_data;
+	pdata = dev_get_platdata(&dev->dev);
 	if (!pdata)
 		return -ENODEV;
 
@@ -117,26 +99,11 @@ static int rbtx4939_flash_probe(struct platform_device *dev)
 		goto err_out;
 	}
 	info->mtd->owner = THIS_MODULE;
+	err = mtd_device_parse_register(info->mtd, NULL, NULL, pdata->parts,
+					pdata->nr_parts);
+
 	if (err)
 		goto err_out;
-
-#ifdef CONFIG_MTD_PARTITIONS
-	err = parse_mtd_partitions(info->mtd, part_probe_types,
-				&info->parts, 0);
-	if (err > 0) {
-		add_mtd_partitions(info->mtd, info->parts, err);
-		info->nr_parts = err;
-		return 0;
-	}
-
-	if (pdata->nr_parts) {
-		pr_notice("Using rbtx4939 partition information\n");
-		add_mtd_partitions(info->mtd, pdata->parts, pdata->nr_parts);
-		return 0;
-	}
-#endif
-
-	add_mtd_device(info->mtd);
 	return 0;
 
 err_out:
@@ -149,9 +116,8 @@ static void rbtx4939_flash_shutdown(struct platform_device *dev)
 {
 	struct rbtx4939_flash_info *info = platform_get_drvdata(dev);
 
-	if (info->mtd->suspend && info->mtd->resume)
-		if (info->mtd->suspend(info->mtd) == 0)
-			info->mtd->resume(info->mtd);
+	if (mtd_suspend(info->mtd) == 0)
+		mtd_resume(info->mtd);
 }
 #else
 #define rbtx4939_flash_shutdown NULL
@@ -167,18 +133,7 @@ static struct platform_driver rbtx4939_flash_driver = {
 	},
 };
 
-static int __init rbtx4939_flash_init(void)
-{
-	return platform_driver_register(&rbtx4939_flash_driver);
-}
-
-static void __exit rbtx4939_flash_exit(void)
-{
-	platform_driver_unregister(&rbtx4939_flash_driver);
-}
-
-module_init(rbtx4939_flash_init);
-module_exit(rbtx4939_flash_exit);
+module_platform_driver(rbtx4939_flash_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("RBTX4939 MTD map driver");
diff --git a/drivers/mtd/maps/redwood.c b/drivers/mtd/maps/redwood.c
deleted file mode 100644
index 933c0b63b01..00000000000
--- a/drivers/mtd/maps/redwood.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * drivers/mtd/maps/redwood.c
- *
- * FLASH map for the IBM Redwood 4/5/6 boards.
- *
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- * 2001-2003 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-
-#if !defined (CONFIG_REDWOOD_6)
-
-#define WINDOW_ADDR 0xffc00000
-#define WINDOW_SIZE 0x00400000
-
-#define RW_PART0_OF	0
-#define RW_PART0_SZ	0x10000
-#define RW_PART1_OF	RW_PART0_SZ
-#define RW_PART1_SZ	0x200000 - 0x10000
-#define RW_PART2_OF	0x200000
-#define RW_PART2_SZ	0x10000
-#define RW_PART3_OF	0x210000
-#define RW_PART3_SZ	0x200000 - (0x10000 + 0x20000)
-#define RW_PART4_OF	0x3e0000
-#define RW_PART4_SZ	0x20000
-
-static struct mtd_partition redwood_flash_partitions[] = {
-	{
-		.name = "Redwood OpenBIOS Vital Product Data",
-		.offset = RW_PART0_OF,
-		.size = RW_PART0_SZ,
-		.mask_flags = MTD_WRITEABLE	/* force read-only */
-	},
-	{
-		.name = "Redwood kernel",
-		.offset = RW_PART1_OF,
-		.size = RW_PART1_SZ
-	},
-	{
-		.name = "Redwood OpenBIOS non-volatile storage",
-		.offset = RW_PART2_OF,
-		.size = RW_PART2_SZ,
-		.mask_flags = MTD_WRITEABLE	/* force read-only */
-	},
-	{
-		.name = "Redwood filesystem",
-		.offset = RW_PART3_OF,
-		.size = RW_PART3_SZ
-	},
-	{
-		.name = "Redwood OpenBIOS",
-		.offset = RW_PART4_OF,
-		.size = RW_PART4_SZ,
-		.mask_flags = MTD_WRITEABLE	/* force read-only */
-	}
-};
-
-#else /* CONFIG_REDWOOD_6 */
-/* FIXME: the window is bigger - armin */
-#define WINDOW_ADDR 0xff800000
-#define WINDOW_SIZE 0x00800000
-
-#define RW_PART0_OF	0
-#define RW_PART0_SZ	0x400000	/* 4 MiB data */
-#define RW_PART1_OF	RW_PART0_OF + RW_PART0_SZ
-#define RW_PART1_SZ	0x10000		/* 64K VPD */
-#define RW_PART2_OF	RW_PART1_OF + RW_PART1_SZ
-#define RW_PART2_SZ	0x400000 - (0x10000 + 0x20000)
-#define RW_PART3_OF	RW_PART2_OF + RW_PART2_SZ
-#define RW_PART3_SZ	0x20000
-
-static struct mtd_partition redwood_flash_partitions[] = {
-	{
-		.name = "Redwood filesystem",
-		.offset = RW_PART0_OF,
-		.size = RW_PART0_SZ
-	},
-	{
-		.name = "Redwood OpenBIOS Vital Product Data",
-		.offset = RW_PART1_OF,
-		.size = RW_PART1_SZ,
-		.mask_flags = MTD_WRITEABLE	/* force read-only */
-	},
-	{
-		.name = "Redwood kernel",
-		.offset = RW_PART2_OF,
-		.size = RW_PART2_SZ
-	},
-	{
-		.name = "Redwood OpenBIOS",
-		.offset = RW_PART3_OF,
-		.size = RW_PART3_SZ,
-		.mask_flags = MTD_WRITEABLE	/* force read-only */
-	}
-};
-
-#endif /* CONFIG_REDWOOD_6 */
-
-struct map_info redwood_flash_map = {
-	.name = "IBM Redwood",
-	.size = WINDOW_SIZE,
-	.bankwidth = 2,
-	.phys = WINDOW_ADDR,
-};
-
-
-#define NUM_REDWOOD_FLASH_PARTITIONS ARRAY_SIZE(redwood_flash_partitions)
-
-static struct mtd_info *redwood_mtd;
-
-static int __init init_redwood_flash(void)
-{
-	int err;
-
-	printk(KERN_NOTICE "redwood: flash mapping: %x at %x\n",
-			WINDOW_SIZE, WINDOW_ADDR);
-
-	redwood_flash_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE);
-
-	if (!redwood_flash_map.virt) {
-		printk("init_redwood_flash: failed to ioremap\n");
-		return -EIO;
-	}
-	simple_map_init(&redwood_flash_map);
-
-	redwood_mtd = do_map_probe("cfi_probe",&redwood_flash_map);
-
-	if (redwood_mtd) {
-		redwood_mtd->owner = THIS_MODULE;
-		err = add_mtd_partitions(redwood_mtd,
-				redwood_flash_partitions,
-				NUM_REDWOOD_FLASH_PARTITIONS);
-		if (err) {
-			printk("init_redwood_flash: add_mtd_partitions failed\n");
-			iounmap(redwood_flash_map.virt);
-		}
-		return err;
-
-	}
-
-	iounmap(redwood_flash_map.virt);
-	return -ENXIO;
-}
-
-static void __exit cleanup_redwood_flash(void)
-{
-	if (redwood_mtd) {
-		del_mtd_partitions(redwood_mtd);
-		/* moved iounmap after map_destroy - armin */
-		map_destroy(redwood_mtd);
-		iounmap((void *)redwood_flash_map.virt);
-	}
-}
-
-module_init(init_redwood_flash);
-module_exit(cleanup_redwood_flash);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("MontaVista Software <source@mvista.com>");
-MODULE_DESCRIPTION("MTD map driver for the IBM Redwood reference boards");
diff --git a/drivers/mtd/maps/rpxlite.c b/drivers/mtd/maps/rpxlite.c
deleted file mode 100644
index 3e3ef53d4fd..00000000000
--- a/drivers/mtd/maps/rpxlite.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Handle mapping of the flash on the RPX Lite and CLLF boards
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-
-
-#define WINDOW_ADDR 0xfe000000
-#define WINDOW_SIZE 0x800000
-
-static struct mtd_info *mymtd;
-
-static struct map_info rpxlite_map = {
-	.name = "RPX",
-	.size = WINDOW_SIZE,
-	.bankwidth = 4,
-	.phys = WINDOW_ADDR,
-};
-
-static int __init init_rpxlite(void)
-{
-	printk(KERN_NOTICE "RPX Lite or CLLF flash device: %x at %x\n", WINDOW_SIZE*4, WINDOW_ADDR);
-	rpxlite_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE * 4);
-
-	if (!rpxlite_map.virt) {
-		printk("Failed to ioremap\n");
-		return -EIO;
-	}
-	simple_map_init(&rpxlite_map);
-	mymtd = do_map_probe("cfi_probe", &rpxlite_map);
-	if (mymtd) {
-		mymtd->owner = THIS_MODULE;
-		add_mtd_device(mymtd);
-		return 0;
-	}
-
-	iounmap((void *)rpxlite_map.virt);
-	return -ENXIO;
-}
-
-static void __exit cleanup_rpxlite(void)
-{
-	if (mymtd) {
-		del_mtd_device(mymtd);
-		map_destroy(mymtd);
-	}
-	if (rpxlite_map.virt) {
-		iounmap((void *)rpxlite_map.virt);
-		rpxlite_map.virt = 0;
-	}
-}
-
-module_init(init_rpxlite);
-module_exit(cleanup_rpxlite);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Arnold Christensen <AKC@pel.dk>");
-MODULE_DESCRIPTION("MTD map driver for RPX Lite and CLLF boards");
diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c
index f3af87e08ec..8fc06bf111c 100644
--- a/drivers/mtd/maps/sa1100-flash.c
+++ b/drivers/mtd/maps/sa1100-flash.c
@@ -23,106 +23,6 @@
 #include <asm/sizes.h>
 #include <asm/mach/flash.h>
 
-#if 0
-/*
- * This is here for documentation purposes only - until these people
- * submit their machine types.  It will be gone January 2005.
- */
-static struct mtd_partition consus_partitions[] = {
-	{
-		.name		= "Consus boot firmware",
-		.offset		= 0,
-		.size		= 0x00040000,
-		.mask_flags	= MTD_WRITABLE, /* force read-only */
-	}, {
-		.name		= "Consus kernel",
-		.offset		= 0x00040000,
-		.size		= 0x00100000,
-		.mask_flags	= 0,
-	}, {
-		.name		= "Consus disk",
-		.offset		= 0x00140000,
-		/* The rest (up to 16M) for jffs.  We could put 0 and
-		   make it find the size automatically, but right now
-		   i have 32 megs.  jffs will use all 32 megs if given
-		   the chance, and this leads to horrible problems
-		   when you try to re-flash the image because blob
-		   won't erase the whole partition. */
-		.size		= 0x01000000 - 0x00140000,
-		.mask_flags	= 0,
-	}, {
-		/* this disk is a secondary disk, which can be used as
-		   needed, for simplicity, make it the size of the other
-		   consus partition, although realistically it could be
-		   the remainder of the disk (depending on the file
-		   system used) */
-		 .name		= "Consus disk2",
-		 .offset	= 0x01000000,
-		 .size		= 0x01000000 - 0x00140000,
-		 .mask_flags	= 0,
-	}
-};
-
-/* Frodo has 2 x 16M 28F128J3A flash chips in bank 0: */
-static struct mtd_partition frodo_partitions[] =
-{
-	{
-		.name		= "bootloader",
-		.size		= 0x00040000,
-		.offset		= 0x00000000,
-		.mask_flags	= MTD_WRITEABLE
-	}, {
-		.name		= "bootloader params",
-		.size		= 0x00040000,
-		.offset		= MTDPART_OFS_APPEND,
-		.mask_flags	= MTD_WRITEABLE
-	}, {
-		.name		= "kernel",
-		.size		= 0x00100000,
-		.offset		= MTDPART_OFS_APPEND,
-		.mask_flags	= MTD_WRITEABLE
-	}, {
-		.name		= "ramdisk",
-		.size		= 0x00400000,
-		.offset		= MTDPART_OFS_APPEND,
-		.mask_flags	= MTD_WRITEABLE
-	}, {
-		.name		= "file system",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND
-	}
-};
-
-static struct mtd_partition jornada56x_partitions[] = {
-	{
-		.name		= "bootldr",
-		.size		= 0x00040000,
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "rootfs",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,
-	}
-};
-
-static void jornada56x_set_vpp(int vpp)
-{
-	if (vpp)
-		GPSR = GPIO_GPIO26;
-	else
-		GPCR = GPIO_GPIO26;
-	GPDR |= GPIO_GPIO26;
-}
-
-/*
- * Machine        Phys          Size    set_vpp
- * Consus    : SA1100_CS0_PHYS SZ_32M
- * Frodo     : SA1100_CS0_PHYS SZ_32M
- * Jornada56x: SA1100_CS0_PHYS SZ_32M jornada56x_set_vpp
- */
-#endif
-
 struct sa_subdev_info {
 	char name[16];
 	struct map_info map;
@@ -131,17 +31,27 @@ struct sa_subdev_info {
 };
 
 struct sa_info {
-	struct mtd_partition	*parts;
 	struct mtd_info		*mtd;
 	int			num_subdev;
-	unsigned int		nr_parts;
 	struct sa_subdev_info	subdev[0];
 };
 
+static DEFINE_SPINLOCK(sa1100_vpp_lock);
+static int sa1100_vpp_refcnt;
 static void sa1100_set_vpp(struct map_info *map, int on)
 {
 	struct sa_subdev_info *subdev = container_of(map, struct sa_subdev_info, map);
-	subdev->plat->set_vpp(on);
+	unsigned long flags;
+
+	spin_lock_irqsave(&sa1100_vpp_lock, flags);
+	if (on) {
+		if (++sa1100_vpp_refcnt == 1)   /* first nested 'on' */
+			subdev->plat->set_vpp(1);
+	} else {
+		if (--sa1100_vpp_refcnt == 0)   /* last nested 'off' */
+			subdev->plat->set_vpp(0);
+	}
+	spin_unlock_irqrestore(&sa1100_vpp_lock, flags);
 }
 
 static void sa1100_destroy_subdev(struct sa_subdev_info *subdev)
@@ -226,20 +136,11 @@ static void sa1100_destroy(struct sa_info *info, struct flash_platform_data *pla
 	int i;
 
 	if (info->mtd) {
-		if (info->nr_parts == 0)
-			del_mtd_device(info->mtd);
-#ifdef CONFIG_MTD_PARTITIONS
-		else
-			del_mtd_partitions(info->mtd);
-#endif
-#ifdef CONFIG_MTD_CONCAT
+		mtd_device_unregister(info->mtd);
 		if (info->mtd != info->subdev[0].mtd)
 			mtd_concat_destroy(info->mtd);
-#endif
 	}
 
-	kfree(info->parts);
-
 	for (i = info->num_subdev - 1; i >= 0; i--)
 		sa1100_destroy_subdev(&info->subdev[i]);
 	kfree(info);
@@ -248,8 +149,8 @@ static void sa1100_destroy(struct sa_info *info, struct flash_platform_data *pla
 		plat->exit();
 }
 
-static struct sa_info *__devinit
-sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *plat)
+static struct sa_info *sa1100_setup_mtd(struct platform_device *pdev,
+					struct flash_platform_data *plat)
 {
 	struct sa_info *info;
 	int nr, size, i, ret = 0;
@@ -321,7 +222,6 @@ sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *plat)
 		info->mtd = info->subdev[0].mtd;
 		ret = 0;
 	} else if (info->num_subdev > 1) {
-#ifdef CONFIG_MTD_CONCAT
 		struct mtd_info *cdev[nr];
 		/*
 		 * We detected multiple devices.  Concatenate them together.
@@ -333,11 +233,6 @@ sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *plat)
 					      plat->name);
 		if (info->mtd == NULL)
 			ret = -ENXIO;
-#else
-		printk(KERN_ERR "SA1100 flash: multiple devices "
-		       "found but MTD concat support disabled.\n");
-		ret = -ENXIO;
-#endif
 	}
 
 	if (ret == 0)
@@ -349,15 +244,13 @@ sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *plat)
 	return ERR_PTR(ret);
 }
 
-static const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
+static const char * const part_probes[] = { "cmdlinepart", "RedBoot", NULL };
 
-static int __devinit sa1100_mtd_probe(struct platform_device *pdev)
+static int sa1100_mtd_probe(struct platform_device *pdev)
 {
-	struct flash_platform_data *plat = pdev->dev.platform_data;
-	struct mtd_partition *parts;
-	const char *part_type = NULL;
+	struct flash_platform_data *plat = dev_get_platdata(&pdev->dev);
 	struct sa_info *info;
-	int err, nr_parts = 0;
+	int err;
 
 	if (!plat)
 		return -ENODEV;
@@ -371,30 +264,8 @@ static int __devinit sa1100_mtd_probe(struct platform_device *pdev)
 	/*
 	 * Partition selection stuff.
 	 */
-#ifdef CONFIG_MTD_PARTITIONS
-	nr_parts = parse_mtd_partitions(info->mtd, part_probes, &parts, 0);
-	if (nr_parts > 0) {
-		info->parts = parts;
-		part_type = "dynamic";
-	} else
-#endif
-	{
-		parts = plat->parts;
-		nr_parts = plat->nr_parts;
-		part_type = "static";
-	}
-
-	if (nr_parts == 0) {
-		printk(KERN_NOTICE "SA1100 flash: no partition info "
-			"available, registering whole flash\n");
-		add_mtd_device(info->mtd);
-	} else {
-		printk(KERN_NOTICE "SA1100 flash: using %s partition "
-			"definition\n", part_type);
-		add_mtd_partitions(info->mtd, parts, nr_parts);
-	}
-
-	info->nr_parts = nr_parts;
+	mtd_device_parse_register(info->mtd, part_probes, NULL, plat->parts,
+				  plat->nr_parts);
 
 	platform_set_drvdata(pdev, info);
 	err = 0;
@@ -406,47 +277,23 @@ static int __devinit sa1100_mtd_probe(struct platform_device *pdev)
 static int __exit sa1100_mtd_remove(struct platform_device *pdev)
 {
 	struct sa_info *info = platform_get_drvdata(pdev);
-	struct flash_platform_data *plat = pdev->dev.platform_data;
+	struct flash_platform_data *plat = dev_get_platdata(&pdev->dev);
 
-	platform_set_drvdata(pdev, NULL);
 	sa1100_destroy(info, plat);
 
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static void sa1100_mtd_shutdown(struct platform_device *dev)
-{
-	struct sa_info *info = platform_get_drvdata(dev);
-	if (info && info->mtd->suspend(info->mtd) == 0)
-		info->mtd->resume(info->mtd);
-}
-#else
-#define sa1100_mtd_shutdown NULL
-#endif
-
 static struct platform_driver sa1100_mtd_driver = {
 	.probe		= sa1100_mtd_probe,
 	.remove		= __exit_p(sa1100_mtd_remove),
-	.shutdown	= sa1100_mtd_shutdown,
 	.driver		= {
 		.name	= "sa1100-mtd",
 		.owner	= THIS_MODULE,
 	},
 };
 
-static int __init sa1100_mtd_init(void)
-{
-	return platform_driver_register(&sa1100_mtd_driver);
-}
-
-static void __exit sa1100_mtd_exit(void)
-{
-	platform_driver_unregister(&sa1100_mtd_driver);
-}
-
-module_init(sa1100_mtd_init);
-module_exit(sa1100_mtd_exit);
+module_platform_driver(sa1100_mtd_driver);
 
 MODULE_AUTHOR("Nicolas Pitre");
 MODULE_DESCRIPTION("SA1100 CFI map driver");
diff --git a/drivers/mtd/maps/sbc_gxx.c b/drivers/mtd/maps/sbc_gxx.c
index 04b2781fc62..556a2dfe94c 100644
--- a/drivers/mtd/maps/sbc_gxx.c
+++ b/drivers/mtd/maps/sbc_gxx.c
@@ -182,7 +182,7 @@ static struct mtd_info *all_mtd;
 static void cleanup_sbc_gxx(void)
 {
 	if( all_mtd ) {
-		del_mtd_partitions( all_mtd );
+		mtd_device_unregister(all_mtd);
 		map_destroy( all_mtd );
 	}
 
@@ -223,7 +223,7 @@ static int __init init_sbc_gxx(void)
 	all_mtd->owner = THIS_MODULE;
 
 	/* Create MTD devices for each partition. */
-	add_mtd_partitions(all_mtd, partition_info, NUM_PARTITIONS );
+	mtd_device_register(all_mtd, partition_info, NUM_PARTITIONS);
 
 	return 0;
 }
diff --git a/drivers/mtd/maps/sc520cdp.c b/drivers/mtd/maps/sc520cdp.c
index 85c1e56309e..093edd51bdc 100644
--- a/drivers/mtd/maps/sc520cdp.c
+++ b/drivers/mtd/maps/sc520cdp.c
@@ -183,7 +183,7 @@ static const struct sc520_par_table par_table[NUM_FLASH_BANKS] =
 
 static void sc520cdp_setup_par(void)
 {
-	volatile unsigned long __iomem *mmcr;
+	unsigned long __iomem *mmcr;
 	unsigned long mmcr_val;
 	int i, j;
 
@@ -197,17 +197,17 @@ static void sc520cdp_setup_par(void)
 	}
 
 	/*
-	** Find the PARxx registers that are reponsible for activating
+	** Find the PARxx registers that are responsible for activating
 	** ROMCS0, ROMCS1 and BOOTCS. Reprogram each of these with a
 	** new value from the table.
 	*/
 	for(i = 0; i < NUM_FLASH_BANKS; i++) {		/* for each par_table entry  */
 		for(j = 0; j < NUM_SC520_PAR; j++) {	/* for each PAR register     */
-			mmcr_val = mmcr[SC520_PAR(j)];
+			mmcr_val = readl(&mmcr[SC520_PAR(j)]);
 			/* if target device field matches, reprogram the PAR */
 			if((mmcr_val & SC520_PAR_TRGDEV) == par_table[i].trgdev)
 			{
-				mmcr[SC520_PAR(j)] = par_table[i].new_par;
+				writel(par_table[i].new_par, &mmcr[SC520_PAR(j)]);
 				break;
 			}
 		}
@@ -266,10 +266,10 @@ static int __init init_sc520cdp(void)
 		/* Combine the two flash banks into a single MTD device & register it: */
 		merged_mtd = mtd_concat_create(mymtd, 2, "SC520CDP Flash Banks #0 and #1");
 		if(merged_mtd)
-			add_mtd_device(merged_mtd);
+			mtd_device_register(merged_mtd, NULL, 0);
 	}
 	if(devices_found == 3) /* register the third (DIL-Flash) device */
-		add_mtd_device(mymtd[2]);
+		mtd_device_register(mymtd[2], NULL, 0);
 	return(devices_found ? 0 : -ENXIO);
 }
 
@@ -278,11 +278,11 @@ static void __exit cleanup_sc520cdp(void)
 	int i;
 
 	if (merged_mtd) {
-		del_mtd_device(merged_mtd);
+		mtd_device_unregister(merged_mtd);
 		mtd_concat_destroy(merged_mtd);
 	}
 	if (mymtd[2])
-		del_mtd_device(mymtd[2]);
+		mtd_device_unregister(mymtd[2]);
 
 	for (i = 0; i < NUM_FLASH_BANKS; i++) {
 		if (mymtd[i])
diff --git a/drivers/mtd/maps/scb2_flash.c b/drivers/mtd/maps/scb2_flash.c
index 7e329f09a54..b7a22a612a4 100644
--- a/drivers/mtd/maps/scb2_flash.c
+++ b/drivers/mtd/maps/scb2_flash.c
@@ -47,7 +47,6 @@
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <asm/io.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
@@ -69,8 +68,7 @@ static struct map_info scb2_map = {
 };
 static int region_fail;
 
-static int __devinit
-scb2_fixup_mtd(struct mtd_info *mtd)
+static int scb2_fixup_mtd(struct mtd_info *mtd)
 {
 	int i;
 	int done = 0;
@@ -133,8 +131,8 @@ scb2_fixup_mtd(struct mtd_info *mtd)
 /* CSB5's 'Function Control Register' has bits for decoding @ >= 0xffc00000 */
 #define CSB5_FCR	0x41
 #define CSB5_FCR_DECODE_ALL 0x0e
-static int __devinit
-scb2_flash_probe(struct pci_dev *dev, const struct pci_device_id *ent)
+static int scb2_flash_probe(struct pci_dev *dev,
+			    const struct pci_device_id *ent)
 {
 	u8 reg;
 
@@ -180,7 +178,7 @@ scb2_flash_probe(struct pci_dev *dev, const struct pci_device_id *ent)
 
 	scb2_mtd->owner = THIS_MODULE;
 	if (scb2_fixup_mtd(scb2_mtd) < 0) {
-		del_mtd_device(scb2_mtd);
+		mtd_device_unregister(scb2_mtd);
 		map_destroy(scb2_mtd);
 		iounmap(scb2_ioaddr);
 		if (!region_fail)
@@ -192,22 +190,20 @@ scb2_flash_probe(struct pci_dev *dev, const struct pci_device_id *ent)
 	       (unsigned long long)scb2_mtd->size,
 	       (unsigned long long)(SCB2_WINDOW - scb2_mtd->size));
 
-	add_mtd_device(scb2_mtd);
+	mtd_device_register(scb2_mtd, NULL, 0);
 
 	return 0;
 }
 
-static void __devexit
-scb2_flash_remove(struct pci_dev *dev)
+static void scb2_flash_remove(struct pci_dev *dev)
 {
 	if (!scb2_mtd)
 		return;
 
 	/* disable flash writes */
-	if (scb2_mtd->lock)
-		scb2_mtd->lock(scb2_mtd, 0, scb2_mtd->size);
+	mtd_lock(scb2_mtd, 0, scb2_mtd->size);
 
-	del_mtd_device(scb2_mtd);
+	mtd_device_unregister(scb2_mtd);
 	map_destroy(scb2_mtd);
 
 	iounmap(scb2_ioaddr);
@@ -215,7 +211,6 @@ scb2_flash_remove(struct pci_dev *dev)
 
 	if (!region_fail)
 		release_mem_region(SCB2_ADDR, SCB2_WINDOW);
-	pci_set_drvdata(dev, NULL);
 }
 
 static struct pci_device_id scb2_flash_pci_ids[] = {
@@ -232,23 +227,10 @@ static struct pci_driver scb2_flash_driver = {
 	.name =     "Intel SCB2 BIOS Flash",
 	.id_table = scb2_flash_pci_ids,
 	.probe =    scb2_flash_probe,
-	.remove =   __devexit_p(scb2_flash_remove),
+	.remove =   scb2_flash_remove,
 };
 
-static int __init
-scb2_flash_init(void)
-{
-	return pci_register_driver(&scb2_flash_driver);
-}
-
-static void __exit
-scb2_flash_exit(void)
-{
-	pci_unregister_driver(&scb2_flash_driver);
-}
-
-module_init(scb2_flash_init);
-module_exit(scb2_flash_exit);
+module_pci_driver(scb2_flash_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Tim Hockin <thockin@sun.com>");
diff --git a/drivers/mtd/maps/scx200_docflash.c b/drivers/mtd/maps/scx200_docflash.c
index b5391ebb736..f1c1f737d0d 100644
--- a/drivers/mtd/maps/scx200_docflash.c
+++ b/drivers/mtd/maps/scx200_docflash.c
@@ -44,7 +44,6 @@ static struct resource docmem = {
 
 static struct mtd_info *mymtd;
 
-#ifdef CONFIG_MTD_PARTITIONS
 static struct mtd_partition partition_info[] = {
 	{
 		.name   = "DOCCS Boot kernel",
@@ -68,8 +67,6 @@ static struct mtd_partition partition_info[] = {
 	},
 };
 #define NUM_PARTITIONS ARRAY_SIZE(partition_info)
-#endif
-
 
 static struct map_info scx200_docflash_map = {
 	.name      = "NatSemi SCx200 DOCCS Flash",
@@ -166,9 +163,8 @@ static int __init init_scx200_docflash(void)
 		outl(pmr, scx200_cb_base + SCx200_PMR);
 	}
 
-       	printk(KERN_INFO NAME ": DOCCS mapped at 0x%llx-0x%llx, width %d\n",
-			(unsigned long long)docmem.start,
-			(unsigned long long)docmem.end, width);
+	printk(KERN_INFO NAME ": DOCCS mapped at %pR, width %d\n",
+	       &docmem, width);
 
 	scx200_docflash_map.size = size;
 	if (width == 8)
@@ -199,24 +195,17 @@ static int __init init_scx200_docflash(void)
 
 	mymtd->owner = THIS_MODULE;
 
-#ifdef CONFIG_MTD_PARTITIONS
 	partition_info[3].offset = mymtd->size-partition_info[3].size;
 	partition_info[2].size = partition_info[3].offset-partition_info[2].offset;
-	add_mtd_partitions(mymtd, partition_info, NUM_PARTITIONS);
-#else
-	add_mtd_device(mymtd);
-#endif
+	mtd_device_register(mymtd, partition_info, NUM_PARTITIONS);
+
 	return 0;
 }
 
 static void __exit cleanup_scx200_docflash(void)
 {
 	if (mymtd) {
-#ifdef CONFIG_MTD_PARTITIONS
-		del_mtd_partitions(mymtd);
-#else
-		del_mtd_device(mymtd);
-#endif
+		mtd_device_unregister(mymtd);
 		map_destroy(mymtd);
 	}
 	if (scx200_docflash_map.virt) {
diff --git a/drivers/mtd/maps/solutionengine.c b/drivers/mtd/maps/solutionengine.c
index 0eb41d9c678..bb580bc1644 100644
--- a/drivers/mtd/maps/solutionengine.c
+++ b/drivers/mtd/maps/solutionengine.c
@@ -19,8 +19,6 @@
 static struct mtd_info *flash_mtd;
 static struct mtd_info *eprom_mtd;
 
-static struct mtd_partition *parsed_parts;
-
 struct map_info soleng_eprom_map = {
 	.name = "Solution Engine EPROM",
 	.size = 0x400000,
@@ -33,30 +31,10 @@ struct map_info soleng_flash_map = {
 	.bankwidth = 4,
 };
 
-static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
-
-#ifdef CONFIG_MTD_SUPERH_RESERVE
-static struct mtd_partition superh_se_partitions[] = {
-	/* Reserved for boot code, read-only */
-	{
-		.name = "flash_boot",
-		.offset = 0x00000000,
-		.size = CONFIG_MTD_SUPERH_RESERVE,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	/* All else is writable (e.g. JFFS) */
-	{
-		.name = "Flash FS",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = MTDPART_SIZ_FULL,
-	}
-};
-#endif /* CONFIG_MTD_SUPERH_RESERVE */
+static const char * const probes[] = { "RedBoot", "cmdlinepart", NULL };
 
 static int __init init_soleng_maps(void)
 {
-	int nr_parts = 0;
-
 	/* First probe at offset 0 */
 	soleng_flash_map.phys = 0;
 	soleng_flash_map.virt = (void __iomem *)P2SEGADDR(0);
@@ -89,24 +67,10 @@ static int __init init_soleng_maps(void)
 	eprom_mtd = do_map_probe("map_rom", &soleng_eprom_map);
 	if (eprom_mtd) {
 		eprom_mtd->owner = THIS_MODULE;
-		add_mtd_device(eprom_mtd);
-	}
-
-	nr_parts = parse_mtd_partitions(flash_mtd, probes, &parsed_parts, 0);
-
-#ifdef CONFIG_MTD_SUPERH_RESERVE
-	if (nr_parts <= 0) {
-		printk(KERN_NOTICE "Using configured partition at 0x%08x.\n",
-		       CONFIG_MTD_SUPERH_RESERVE);
-		parsed_parts = superh_se_partitions;
-		nr_parts = sizeof(superh_se_partitions)/sizeof(*parsed_parts);
+		mtd_device_register(eprom_mtd, NULL, 0);
 	}
-#endif /* CONFIG_MTD_SUPERH_RESERVE */
 
-	if (nr_parts > 0)
-		add_mtd_partitions(flash_mtd, parsed_parts, nr_parts);
-	else
-		add_mtd_device(flash_mtd);
+	mtd_device_parse_register(flash_mtd, probes, NULL, NULL, 0);
 
 	return 0;
 }
@@ -114,14 +78,11 @@ static int __init init_soleng_maps(void)
 static void __exit cleanup_soleng_maps(void)
 {
 	if (eprom_mtd) {
-		del_mtd_device(eprom_mtd);
+		mtd_device_unregister(eprom_mtd);
 		map_destroy(eprom_mtd);
 	}
 
-	if (parsed_parts)
-		del_mtd_partitions(flash_mtd);
-	else
-		del_mtd_device(flash_mtd);
+	mtd_device_unregister(flash_mtd);
 	map_destroy(flash_mtd);
 }
 
diff --git a/drivers/mtd/maps/sun_uflash.c b/drivers/mtd/maps/sun_uflash.c
index 0391c2527bd..b6f1aac3510 100644
--- a/drivers/mtd/maps/sun_uflash.c
+++ b/drivers/mtd/maps/sun_uflash.c
@@ -11,7 +11,6 @@
 #include <linux/module.h>
 #include <linux/fs.h>
 #include <linux/errno.h>
-#include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
@@ -48,7 +47,7 @@ struct map_info uflash_map_templ = {
 	.bankwidth =	UFLASH_BUSWIDTH,
 };
 
-int uflash_devinit(struct of_device *op, struct device_node *dp)
+int uflash_devinit(struct platform_device *op, struct device_node *dp)
 {
 	struct uflash_dev *up;
 
@@ -75,7 +74,7 @@ int uflash_devinit(struct of_device *op, struct device_node *dp)
 
 	up->name = of_get_property(dp, "model", NULL);
 	if (up->name && 0 < strlen(up->name))
-		up->map.name = (char *)up->name;
+		up->map.name = up->name;
 
 	up->map.phys = op->resource[0].start;
 
@@ -101,14 +100,14 @@ int uflash_devinit(struct of_device *op, struct device_node *dp)
 
 	up->mtd->owner = THIS_MODULE;
 
-	add_mtd_device(up->mtd);
+	mtd_device_register(up->mtd, NULL, 0);
 
 	dev_set_drvdata(&op->dev, up);
 
 	return 0;
 }
 
-static int __devinit uflash_probe(struct of_device *op, const struct of_device_id *match)
+static int uflash_probe(struct platform_device *op)
 {
 	struct device_node *dp = op->dev.of_node;
 
@@ -121,12 +120,12 @@ static int __devinit uflash_probe(struct of_device *op, const struct of_device_i
 	return uflash_devinit(op, dp);
 }
 
-static int __devexit uflash_remove(struct of_device *op)
+static int uflash_remove(struct platform_device *op)
 {
 	struct uflash_dev *up = dev_get_drvdata(&op->dev);
 
 	if (up->mtd) {
-		del_mtd_device(up->mtd);
+		mtd_device_unregister(up->mtd);
 		map_destroy(up->mtd);
 	}
 	if (up->map.virt) {
@@ -148,25 +147,14 @@ static const struct of_device_id uflash_match[] = {
 
 MODULE_DEVICE_TABLE(of, uflash_match);
 
-static struct of_platform_driver uflash_driver = {
+static struct platform_driver uflash_driver = {
 	.driver = {
 		.name = DRIVER_NAME,
 		.owner = THIS_MODULE,
 		.of_match_table = uflash_match,
 	},
 	.probe		= uflash_probe,
-	.remove		= __devexit_p(uflash_remove),
+	.remove		= uflash_remove,
 };
 
-static int __init uflash_init(void)
-{
-	return of_register_driver(&uflash_driver, &of_bus_type);
-}
-
-static void __exit uflash_exit(void)
-{
-	of_unregister_driver(&uflash_driver);
-}
-
-module_init(uflash_init);
-module_exit(uflash_exit);
+module_platform_driver(uflash_driver);
diff --git a/drivers/mtd/maps/tqm8xxl.c b/drivers/mtd/maps/tqm8xxl.c
deleted file mode 100644
index 60146984f4b..00000000000
--- a/drivers/mtd/maps/tqm8xxl.c
+++ /dev/null
@@ -1,259 +0,0 @@
-/*
- * Handle mapping of the flash memory access routines
- * on TQM8xxL based devices.
- *
- * based on rpxlite.c
- *
- * Copyright(C) 2001 Kirk Lee <kirk@hpc.ee.ntu.edu.tw>
- *
- * This code is GPLed
- *
- */
-
-/*
- * According to TQM8xxL hardware manual, TQM8xxL series have
- * following flash memory organisations:
- *	| capacity |	| chip type |	| bank0 |	| bank1 |
- *	    2MiB	   512Kx16	  2MiB		   0
- *	    4MiB	   1Mx16	  4MiB		   0
- *	    8MiB	   1Mx16	  4MiB		   4MiB
- * Thus, we choose CONFIG_MTD_CFI_I2 & CONFIG_MTD_CFI_B4 at
- * kernel configuration.
- */
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-
-#define FLASH_ADDR 0x40000000
-#define FLASH_SIZE 0x00800000
-#define FLASH_BANK_MAX 4
-
-// trivial struct to describe partition information
-struct mtd_part_def
-{
-	int nums;
-	unsigned char *type;
-	struct mtd_partition* mtd_part;
-};
-
-//static struct mtd_info *mymtd;
-static struct mtd_info* mtd_banks[FLASH_BANK_MAX];
-static struct map_info* map_banks[FLASH_BANK_MAX];
-static struct mtd_part_def part_banks[FLASH_BANK_MAX];
-static unsigned long num_banks;
-static void __iomem *start_scan_addr;
-
-/*
- * Here are partition information for all known TQM8xxL series devices.
- * See include/linux/mtd/partitions.h for definition of the mtd_partition
- * structure.
- *
- * The *_max_flash_size is the maximum possible mapped flash size which
- * is not necessarily the actual flash size.  It must correspond to the
- * value specified in the mapping definition defined by the
- * "struct map_desc *_io_desc" for the corresponding machine.
- */
-
-#ifdef CONFIG_MTD_PARTITIONS
-/* Currently, TQM8xxL has upto 8MiB flash */
-static unsigned long tqm8xxl_max_flash_size = 0x00800000;
-
-/* partition definition for first flash bank
- * (cf. "drivers/char/flash_config.c")
- */
-static struct mtd_partition tqm8xxl_partitions[] = {
-	{
-	  .name = "ppcboot",
-	  .offset = 0x00000000,
-	  .size = 0x00020000,           /* 128KB           */
-	  .mask_flags = MTD_WRITEABLE,  /* force read-only */
-	},
-	{
-	  .name = "kernel",             /* default kernel image */
-	  .offset = 0x00020000,
-	  .size = 0x000e0000,
-	  .mask_flags = MTD_WRITEABLE,  /* force read-only */
-	},
-	{
-	  .name = "user",
-	  .offset = 0x00100000,
-	  .size = 0x00100000,
-	},
-	{
-	  .name = "initrd",
-	  .offset = 0x00200000,
-	  .size = 0x00200000,
-	}
-};
-/* partition definition for second flash bank */
-static struct mtd_partition tqm8xxl_fs_partitions[] = {
-	{
-	  .name = "cramfs",
-	  .offset = 0x00000000,
-	  .size = 0x00200000,
-	},
-	{
-	  .name = "jffs",
-	  .offset = 0x00200000,
-	  .size = 0x00200000,
-	  //.size = MTDPART_SIZ_FULL,
-	}
-};
-#endif
-
-static int __init init_tqm_mtd(void)
-{
-	int idx = 0, ret = 0;
-	unsigned long flash_addr, flash_size, mtd_size = 0;
-	/* pointer to TQM8xxL board info data */
-	bd_t *bd = (bd_t *)__res;
-
-	flash_addr = bd->bi_flashstart;
-	flash_size = bd->bi_flashsize;
-
-	//request maximum flash size address space
-	start_scan_addr = ioremap(flash_addr, flash_size);
-	if (!start_scan_addr) {
-		printk(KERN_WARNING "%s:Failed to ioremap address:0x%x\n", __func__, flash_addr);
-		return -EIO;
-	}
-
-	for (idx = 0 ; idx < FLASH_BANK_MAX ; idx++) {
-		if(mtd_size >= flash_size)
-			break;
-
-		printk(KERN_INFO "%s: chip probing count %d\n", __func__, idx);
-
-		map_banks[idx] = kzalloc(sizeof(struct map_info), GFP_KERNEL);
-		if(map_banks[idx] == NULL) {
-			ret = -ENOMEM;
-			/* FIXME: What if some MTD devices were probed already? */
-			goto error_mem;
-		}
-
-		map_banks[idx]->name = (char *)kmalloc(16, GFP_KERNEL);
-
-		if (!map_banks[idx]->name) {
-			ret = -ENOMEM;
-			/* FIXME: What if some MTD devices were probed already? */
-			goto error_mem;
-		}
-		sprintf(map_banks[idx]->name, "TQM8xxL%d", idx);
-
-		map_banks[idx]->size = flash_size;
-		map_banks[idx]->bankwidth = 4;
-
-		simple_map_init(map_banks[idx]);
-
-		map_banks[idx]->virt = start_scan_addr;
-		map_banks[idx]->phys = flash_addr;
-		/* FIXME: This looks utterly bogus, but I'm trying to
-		   preserve the behaviour of the original (shown here)...
-
-		map_banks[idx]->map_priv_1 =
-		start_scan_addr + ((idx > 0) ?
-		(mtd_banks[idx-1] ? mtd_banks[idx-1]->size : 0) : 0);
-		*/
-
-		if (idx && mtd_banks[idx-1]) {
-			map_banks[idx]->virt += mtd_banks[idx-1]->size;
-			map_banks[idx]->phys += mtd_banks[idx-1]->size;
-		}
-
-		//start to probe flash chips
-		mtd_banks[idx] = do_map_probe("cfi_probe", map_banks[idx]);
-
-		if (mtd_banks[idx]) {
-			mtd_banks[idx]->owner = THIS_MODULE;
-			mtd_size += mtd_banks[idx]->size;
-			num_banks++;
-
-			printk(KERN_INFO "%s: bank%d, name:%s, size:%dbytes \n", __func__, num_banks,
-			mtd_banks[idx]->name, mtd_banks[idx]->size);
-		}
-	}
-
-	/* no supported flash chips found */
-	if (!num_banks) {
-		printk(KERN_NOTICE "TQM8xxL: No support flash chips found!\n");
-		ret = -ENXIO;
-		goto error_mem;
-	}
-
-#ifdef CONFIG_MTD_PARTITIONS
-	/*
-	 * Select Static partition definitions
-	 */
-	part_banks[0].mtd_part = tqm8xxl_partitions;
-	part_banks[0].type = "Static image";
-	part_banks[0].nums = ARRAY_SIZE(tqm8xxl_partitions);
-
-	part_banks[1].mtd_part = tqm8xxl_fs_partitions;
-	part_banks[1].type = "Static file system";
-	part_banks[1].nums = ARRAY_SIZE(tqm8xxl_fs_partitions);
-
-	for(idx = 0; idx < num_banks ; idx++) {
-		if (part_banks[idx].nums == 0) {
-			printk(KERN_NOTICE "TQM flash%d: no partition info available, registering whole flash at once\n", idx);
-			add_mtd_device(mtd_banks[idx]);
-		} else {
-			printk(KERN_NOTICE "TQM flash%d: Using %s partition definition\n",
-					idx, part_banks[idx].type);
-			add_mtd_partitions(mtd_banks[idx], part_banks[idx].mtd_part,
-								part_banks[idx].nums);
-		}
-	}
-#else
-	printk(KERN_NOTICE "TQM flash: registering %d whole flash banks at once\n", num_banks);
-	for(idx = 0 ; idx < num_banks ; idx++)
-		add_mtd_device(mtd_banks[idx]);
-#endif
-	return 0;
-error_mem:
-	for(idx = 0 ; idx < FLASH_BANK_MAX ; idx++) {
-		if(map_banks[idx] != NULL) {
-			kfree(map_banks[idx]->name);
-			map_banks[idx]->name = NULL;
-			kfree(map_banks[idx]);
-			map_banks[idx] = NULL;
-		}
-	}
-error:
-	iounmap(start_scan_addr);
-	return ret;
-}
-
-static void __exit cleanup_tqm_mtd(void)
-{
-	unsigned int idx = 0;
-	for(idx = 0 ; idx < num_banks ; idx++) {
-		/* destroy mtd_info previously allocated */
-		if (mtd_banks[idx]) {
-			del_mtd_partitions(mtd_banks[idx]);
-			map_destroy(mtd_banks[idx]);
-		}
-		/* release map_info not used anymore */
-		kfree(map_banks[idx]->name);
-		kfree(map_banks[idx]);
-	}
-
-	if (start_scan_addr) {
-		iounmap(start_scan_addr);
-		start_scan_addr = 0;
-	}
-}
-
-module_init(init_tqm_mtd);
-module_exit(cleanup_tqm_mtd);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Kirk Lee <kirk@hpc.ee.ntu.edu.tw>");
-MODULE_DESCRIPTION("MTD map driver for TQM8xxL boards");
diff --git a/drivers/mtd/maps/ts5500_flash.c b/drivers/mtd/maps/ts5500_flash.c
index e2147bf11c8..d1d671daf23 100644
--- a/drivers/mtd/maps/ts5500_flash.c
+++ b/drivers/mtd/maps/ts5500_flash.c
@@ -89,12 +89,11 @@ static int __init init_ts5500_map(void)
 	}
 
 	mymtd->owner = THIS_MODULE;
-	add_mtd_partitions(mymtd, ts5500_partitions, NUM_PARTITIONS);
+	mtd_device_register(mymtd, ts5500_partitions, NUM_PARTITIONS);
 
 	return 0;
 
 err1:
-	map_destroy(mymtd);
 	iounmap(ts5500_map.virt);
 err2:
 	return rc;
@@ -103,7 +102,7 @@ err2:
 static void __exit cleanup_ts5500_map(void)
 {
 	if (mymtd) {
-		del_mtd_partitions(mymtd);
+		mtd_device_unregister(mymtd);
 		map_destroy(mymtd);
 	}
 
diff --git a/drivers/mtd/maps/tsunami_flash.c b/drivers/mtd/maps/tsunami_flash.c
index 77a8bfc0257..da2cdb5fd6d 100644
--- a/drivers/mtd/maps/tsunami_flash.c
+++ b/drivers/mtd/maps/tsunami_flash.c
@@ -76,17 +76,18 @@ static void __exit  cleanup_tsunami_flash(void)
 	struct mtd_info *mtd;
 	mtd = tsunami_flash_mtd;
 	if (mtd) {
-		del_mtd_device(mtd);
+		mtd_device_unregister(mtd);
 		map_destroy(mtd);
 	}
 	tsunami_flash_mtd = 0;
 }
 
+static const char * const rom_probe_types[] = {
+	"cfi_probe", "jedec_probe", "map_rom", NULL };
 
 static int __init init_tsunami_flash(void)
 {
-	static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", "map_rom", NULL };
-	char **type;
+	const char * const *type;
 
 	tsunami_tig_writeb(FLASH_ENABLE_BYTE, FLASH_ENABLE_PORT);
 
@@ -97,7 +98,7 @@ static int __init init_tsunami_flash(void)
 	}
 	if (tsunami_flash_mtd) {
 		tsunami_flash_mtd->owner = THIS_MODULE;
-		add_mtd_device(tsunami_flash_mtd);
+		mtd_device_register(tsunami_flash_mtd, NULL, 0);
 		return 0;
 	}
 	return -ENXIO;
diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c
index 35009294b43..c1af83db520 100644
--- a/drivers/mtd/maps/uclinux.c
+++ b/drivers/mtd/maps/uclinux.c
@@ -19,17 +19,30 @@
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
 #include <asm/io.h>
+#include <asm/sections.h>
 
 /****************************************************************************/
 
-extern char _ebss;
+#ifdef CONFIG_MTD_ROM
+#define MAP_NAME "rom"
+#else
+#define MAP_NAME "ram"
+#endif
+
+/*
+ * Blackfin uses uclinux_ram_map during startup, so it must not be static.
+ * Provide a dummy declaration to make sparse happy.
+ */
+extern struct map_info uclinux_ram_map;
 
 struct map_info uclinux_ram_map = {
-	.name = "RAM",
-	.phys = (unsigned long)&_ebss,
+	.name = MAP_NAME,
 	.size = 0,
 };
 
+static unsigned long physaddr = -1;
+module_param(physaddr, ulong, S_IRUGO);
+
 static struct mtd_info *uclinux_ram_mtdinfo;
 
 /****************************************************************************/
@@ -61,39 +74,46 @@ static int __init uclinux_mtd_init(void)
 	struct map_info *mapp;
 
 	mapp = &uclinux_ram_map;
+
+	if (physaddr == -1)
+		mapp->phys = (resource_size_t)__bss_stop;
+	else
+		mapp->phys = physaddr;
+
 	if (!mapp->size)
 		mapp->size = PAGE_ALIGN(ntohl(*((unsigned long *)(mapp->phys + 8))));
 	mapp->bankwidth = 4;
 
-	printk("uclinux[mtd]: RAM probe address=0x%x size=0x%x\n",
+	printk("uclinux[mtd]: probe address=0x%x size=0x%x\n",
 	       	(int) mapp->phys, (int) mapp->size);
 
-	mapp->virt = ioremap_nocache(mapp->phys, mapp->size);
+	/*
+	 * The filesystem is guaranteed to be in direct mapped memory. It is
+	 * directly following the kernels own bss region. Following the same
+	 * mechanism used by architectures setting up traditional initrds we
+	 * use phys_to_virt to get the virtual address of its start.
+	 */
+	mapp->virt = phys_to_virt(mapp->phys);
 
 	if (mapp->virt == 0) {
-		printk("uclinux[mtd]: ioremap_nocache() failed\n");
+		printk("uclinux[mtd]: no virtual mapping?\n");
 		return(-EIO);
 	}
 
 	simple_map_init(mapp);
 
-	mtd = do_map_probe("map_ram", mapp);
+	mtd = do_map_probe("map_" MAP_NAME, mapp);
 	if (!mtd) {
 		printk("uclinux[mtd]: failed to find a mapping?\n");
-		iounmap(mapp->virt);
 		return(-ENXIO);
 	}
 
 	mtd->owner = THIS_MODULE;
-	mtd->point = uclinux_point;
+	mtd->_point = uclinux_point;
 	mtd->priv = mapp;
 
 	uclinux_ram_mtdinfo = mtd;
-#ifdef CONFIG_MTD_PARTITIONS
-	add_mtd_partitions(mtd, uclinux_romfs, NUM_PARTITIONS);
-#else
-	add_mtd_device(mtd);
-#endif
+	mtd_device_register(mtd, uclinux_romfs, NUM_PARTITIONS);
 
 	return(0);
 }
@@ -103,18 +123,12 @@ static int __init uclinux_mtd_init(void)
 static void __exit uclinux_mtd_cleanup(void)
 {
 	if (uclinux_ram_mtdinfo) {
-#ifdef CONFIG_MTD_PARTITIONS
-		del_mtd_partitions(uclinux_ram_mtdinfo);
-#else
-		del_mtd_device(uclinux_ram_mtdinfo);
-#endif
+		mtd_device_unregister(uclinux_ram_mtdinfo);
 		map_destroy(uclinux_ram_mtdinfo);
 		uclinux_ram_mtdinfo = NULL;
 	}
-	if (uclinux_ram_map.virt) {
-		iounmap((void *) uclinux_ram_map.virt);
+	if (uclinux_ram_map.virt)
 		uclinux_ram_map.virt = 0;
-	}
 }
 
 /****************************************************************************/
@@ -124,6 +138,6 @@ module_exit(uclinux_mtd_cleanup);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Greg Ungerer <gerg@snapgear.com>");
-MODULE_DESCRIPTION("Generic RAM based MTD for uClinux");
+MODULE_DESCRIPTION("Generic MTD for uClinux");
 
 /****************************************************************************/
diff --git a/drivers/mtd/maps/vmax301.c b/drivers/mtd/maps/vmax301.c
deleted file mode 100644
index 6adaa6acc19..00000000000
--- a/drivers/mtd/maps/vmax301.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/* ######################################################################
-
-   Tempustech VMAX SBC301 MTD Driver.
-
-   The VMAx 301 is a SBC based on . It
-   comes with three builtin AMD 29F016B flash chips and a socket for SRAM or
-   more flash. Each unit has it's own 8k mapping into a settable region
-   (0xD8000). There are two 8k mappings for each MTD, the first is always set
-   to the lower 8k of the device the second is paged. Writing a 16 bit page
-   value to anywhere in the first 8k will cause the second 8k to page around.
-
-   To boot the device a bios extension must be installed into the first 8k
-   of flash that is smart enough to copy itself down, page in the rest of
-   itself and begin executing.
-
-   ##################################################################### */
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <asm/io.h>
-
-#include <linux/mtd/map.h>
-#include <linux/mtd/mtd.h>
-
-
-#define WINDOW_START 0xd8000
-#define WINDOW_LENGTH 0x2000
-#define WINDOW_SHIFT 25
-#define WINDOW_MASK 0x1FFF
-
-/* Actually we could use two spinlocks, but we'd have to have
-   more private space in the struct map_info. We lose a little
-   performance like this, but we'd probably lose more by having
-   the extra indirection from having one of the map->map_priv
-   fields pointing to yet another private struct.
-*/
-static DEFINE_SPINLOCK(vmax301_spin);
-
-static void __vmax301_page(struct map_info *map, unsigned long page)
-{
-	writew(page, map->map_priv_2 - WINDOW_LENGTH);
-	map->map_priv_1 = page;
-}
-
-static inline void vmax301_page(struct map_info *map,
-				  unsigned long ofs)
-{
-	unsigned long page = (ofs >> WINDOW_SHIFT);
-	if (map->map_priv_1 != page)
-		__vmax301_page(map, page);
-}
-
-static map_word vmax301_read8(struct map_info *map, unsigned long ofs)
-{
-	map_word ret;
-	spin_lock(&vmax301_spin);
-	vmax301_page(map, ofs);
-	ret.x[0] = readb(map->map_priv_2 + (ofs & WINDOW_MASK));
-	spin_unlock(&vmax301_spin);
-	return ret;
-}
-
-static void vmax301_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
-{
-	while(len) {
-		unsigned long thislen = len;
-		if (len > (WINDOW_LENGTH - (from & WINDOW_MASK)))
-			thislen = WINDOW_LENGTH-(from & WINDOW_MASK);
-		spin_lock(&vmax301_spin);
-		vmax301_page(map, from);
-		memcpy_fromio(to, map->map_priv_2 + from, thislen);
-		spin_unlock(&vmax301_spin);
-		to += thislen;
-		from += thislen;
-		len -= thislen;
-	}
-}
-
-static void vmax301_write8(struct map_info *map, map_word d, unsigned long adr)
-{
-	spin_lock(&vmax301_spin);
-	vmax301_page(map, adr);
-	writeb(d.x[0], map->map_priv_2 + (adr & WINDOW_MASK));
-	spin_unlock(&vmax301_spin);
-}
-
-static void vmax301_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
-{
-	while(len) {
-		unsigned long thislen = len;
-		if (len > (WINDOW_LENGTH - (to & WINDOW_MASK)))
-			thislen = WINDOW_LENGTH-(to & WINDOW_MASK);
-
-		spin_lock(&vmax301_spin);
-		vmax301_page(map, to);
-		memcpy_toio(map->map_priv_2 + to, from, thislen);
-		spin_unlock(&vmax301_spin);
-		to += thislen;
-		from += thislen;
-		len -= thislen;
-	}
-}
-
-static struct map_info vmax_map[2] = {
-	{
-		.name = "VMAX301 Internal Flash",
-		.phys = NO_XIP,
-		.size = 3*2*1024*1024,
-		.bankwidth = 1,
-		.read = vmax301_read8,
-		.copy_from = vmax301_copy_from,
-		.write = vmax301_write8,
-		.copy_to = vmax301_copy_to,
-		.map_priv_1 = WINDOW_START + WINDOW_LENGTH,
-		.map_priv_2 = 0xFFFFFFFF
-	},
-	{
-		.name = "VMAX301 Socket",
-		.phys = NO_XIP,
-		.size = 0,
-		.bankwidth = 1,
-		.read = vmax301_read8,
-		.copy_from = vmax301_copy_from,
-		.write = vmax301_write8,
-		.copy_to = vmax301_copy_to,
-		.map_priv_1 = WINDOW_START + (3*WINDOW_LENGTH),
-		.map_priv_2 = 0xFFFFFFFF
-	}
-};
-
-static struct mtd_info *vmax_mtd[2] = {NULL, NULL};
-
-static void __exit cleanup_vmax301(void)
-{
-	int i;
-
-	for (i=0; i<2; i++) {
-		if (vmax_mtd[i]) {
-			del_mtd_device(vmax_mtd[i]);
-			map_destroy(vmax_mtd[i]);
-		}
-	}
-	iounmap((void *)vmax_map[0].map_priv_1 - WINDOW_START);
-}
-
-static int __init init_vmax301(void)
-{
-	int i;
-	unsigned long iomapadr;
-	// Print out our little header..
-	printk("Tempustech VMAX 301 MEM:0x%x-0x%x\n",WINDOW_START,
-	       WINDOW_START+4*WINDOW_LENGTH);
-
-	iomapadr = (unsigned long)ioremap(WINDOW_START, WINDOW_LENGTH*4);
-	if (!iomapadr) {
-		printk("Failed to ioremap memory region\n");
-		return -EIO;
-	}
-	/* Put the address in the map's private data area.
-	   We store the actual MTD IO address rather than the
-	   address of the first half, because it's used more
-	   often.
-	*/
-	vmax_map[0].map_priv_2 = iomapadr + WINDOW_START;
-	vmax_map[1].map_priv_2 = iomapadr + (3*WINDOW_START);
-
-	for (i=0; i<2; i++) {
-		vmax_mtd[i] = do_map_probe("cfi_probe", &vmax_map[i]);
-		if (!vmax_mtd[i])
-			vmax_mtd[i] = do_map_probe("jedec", &vmax_map[i]);
-		if (!vmax_mtd[i])
-			vmax_mtd[i] = do_map_probe("map_ram", &vmax_map[i]);
-		if (!vmax_mtd[i])
-			vmax_mtd[i] = do_map_probe("map_rom", &vmax_map[i]);
-		if (vmax_mtd[i]) {
-			vmax_mtd[i]->owner = THIS_MODULE;
-			add_mtd_device(vmax_mtd[i]);
-		}
-	}
-
-	if (!vmax_mtd[0] && !vmax_mtd[1]) {
-		iounmap((void *)iomapadr);
-		return -ENXIO;
-	}
-
-	return 0;
-}
-
-module_init(init_vmax301);
-module_exit(cleanup_vmax301);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
-MODULE_DESCRIPTION("MTD map driver for Tempustech VMAX SBC301 board");
diff --git a/drivers/mtd/maps/vmu-flash.c b/drivers/mtd/maps/vmu-flash.c
index 4afc167731e..6b223cfe92b 100644
--- a/drivers/mtd/maps/vmu-flash.c
+++ b/drivers/mtd/maps/vmu-flash.c
@@ -360,9 +360,6 @@ static int vmu_flash_read(struct mtd_info *mtd, loff_t from, size_t len,
 	int index = 0, retval, partition, leftover, numblocks;
 	unsigned char cx;
 
-	if (len < 1)
-		return -EIO;
-
 	mpart = mtd->priv;
 	mdev = mpart->mdev;
 	partition = mpart->partition;
@@ -434,11 +431,6 @@ static int vmu_flash_write(struct mtd_info *mtd, loff_t to, size_t len,
 	partition = mpart->partition;
 	card = maple_get_drvdata(mdev);
 
-	/* simple sanity checks */
-	if (len < 1) {
-		error = -EIO;
-		goto failed;
-	}
 	numblocks = card->parts[partition].numblocks;
 	if (to + len > numblocks * card->blocklen)
 		len = numblocks * card->blocklen - to;
@@ -544,9 +536,9 @@ static void vmu_queryblocks(struct mapleq *mq)
 	mtd_cur->flags = MTD_WRITEABLE|MTD_NO_ERASE;
 	mtd_cur->size = part_cur->numblocks * card->blocklen;
 	mtd_cur->erasesize = card->blocklen;
-	mtd_cur->write = vmu_flash_write;
-	mtd_cur->read = vmu_flash_read;
-	mtd_cur->sync = vmu_flash_sync;
+	mtd_cur->_write = vmu_flash_write;
+	mtd_cur->_read = vmu_flash_read;
+	mtd_cur->_sync = vmu_flash_sync;
 	mtd_cur->writesize = card->blocklen;
 
 	mpart = kmalloc(sizeof(struct mdev_part), GFP_KERNEL);
@@ -563,7 +555,7 @@ static void vmu_queryblocks(struct mapleq *mq)
 		goto fail_cache_create;
 	part_cur->pcache = pcache;
 
-	error = add_mtd_device(mtd_cur);
+	error = mtd_device_register(mtd_cur, NULL, 0);
 	if (error)
 		goto fail_mtd_register;
 
@@ -604,7 +596,7 @@ fail_name:
 }
 
 /* Handles very basic info about the flash, queries for details */
-static int __devinit vmu_connect(struct maple_device *mdev)
+static int vmu_connect(struct maple_device *mdev)
 {
 	unsigned long test_flash_data, basic_flash_data;
 	int c, error;
@@ -698,7 +690,7 @@ fail_nomem:
 	return error;
 }
 
-static void __devexit vmu_disconnect(struct maple_device *mdev)
+static void vmu_disconnect(struct maple_device *mdev)
 {
 	struct memcard *card;
 	struct mdev_part *mpart;
@@ -709,7 +701,7 @@ static void __devexit vmu_disconnect(struct maple_device *mdev)
 	for (x = 0; x < card->partitions; x++) {
 		mpart = ((card->mtd)[x]).priv;
 		mpart->mdev = NULL;
-		del_mtd_device(&((card->mtd)[x]));
+		mtd_device_unregister(&((card->mtd)[x]));
 		kfree(((card->parts)[x]).name);
 	}
 	kfree(card->parts);
@@ -780,7 +772,7 @@ static void vmu_file_error(struct maple_device *mdev, void *recvbuf)
 }
 
 
-static int __devinit probe_maple_vmu(struct device *dev)
+static int probe_maple_vmu(struct device *dev)
 {
 	int error;
 	struct maple_device *mdev = to_maple_dev(dev);
@@ -797,7 +789,7 @@ static int __devinit probe_maple_vmu(struct device *dev)
 	return 0;
 }
 
-static int __devexit remove_maple_vmu(struct device *dev)
+static int remove_maple_vmu(struct device *dev)
 {
 	struct maple_device *mdev = to_maple_dev(dev);
 
@@ -810,7 +802,7 @@ static struct maple_driver vmu_flash_driver = {
 	.drv = {
 		.name =		"Dreamcast_visual_memory",
 		.probe =	probe_maple_vmu,
-		.remove = 	__devexit_p(remove_maple_vmu),
+		.remove =	remove_maple_vmu,
 	},
 };
 
diff --git a/drivers/mtd/maps/wr_sbc82xx_flash.c b/drivers/mtd/maps/wr_sbc82xx_flash.c
deleted file mode 100644
index 933a2b6598b..00000000000
--- a/drivers/mtd/maps/wr_sbc82xx_flash.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Map for flash chips on Wind River PowerQUICC II SBC82xx board.
- *
- * Copyright (C) 2004 Red Hat, Inc.
- *
- * Author: David Woodhouse <dwmw2@infradead.org>
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <asm/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/immap_cpm2.h>
-
-static struct mtd_info *sbcmtd[3];
-static struct mtd_partition *sbcmtd_parts[3];
-
-struct map_info sbc82xx_flash_map[3] = {
-	{.name = "Boot flash"},
-	{.name = "Alternate boot flash"},
-	{.name = "User flash"}
-};
-
-static struct mtd_partition smallflash_parts[] = {
-	{
-		.name =		"space",
-		.size =		0x100000,
-		.offset =	0,
-	}, {
-		.name =		"bootloader",
-		.size =		MTDPART_SIZ_FULL,
-		.offset =	MTDPART_OFS_APPEND,
-	}
-};
-
-static struct mtd_partition bigflash_parts[] = {
-	{
-		.name =		"bootloader",
-		.size =		0x00100000,
-		.offset =	0,
-	}, {
-		.name =		"file system",
-		.size =		0x01f00000,
-		.offset =	MTDPART_OFS_APPEND,
-	}, {
-		.name =		"boot config",
-		.size =		0x00100000,
-		.offset =	MTDPART_OFS_APPEND,
-	}, {
-		.name =		"space",
-		.size =		0x01f00000,
-		.offset =	MTDPART_OFS_APPEND,
-	}
-};
-
-static const char *part_probes[] __initdata = {"cmdlinepart", "RedBoot", NULL};
-
-#define init_sbc82xx_one_flash(map, br, or)			\
-do {								\
-	(map).phys = (br & 1) ? (br & 0xffff8000) : 0;		\
-	(map).size = (br & 1) ? (~(or & 0xffff8000) + 1) : 0;	\
-	switch (br & 0x00001800) {				\
-	case 0x00000000:					\
-	case 0x00000800:	(map).bankwidth = 1;	break;	\
-	case 0x00001000:	(map).bankwidth = 2;	break;	\
-	case 0x00001800:	(map).bankwidth = 4;	break;	\
-	}							\
-} while (0);
-
-static int __init init_sbc82xx_flash(void)
-{
-	volatile memctl_cpm2_t *mc = &cpm2_immr->im_memctl;
-	int bigflash;
-	int i;
-
-#ifdef CONFIG_SBC8560
-	mc = ioremap(0xff700000 + 0x5000, sizeof(memctl_cpm2_t));
-#else
-	mc = &cpm2_immr->im_memctl;
-#endif
-
-	bigflash = 1;
-	if ((mc->memc_br0 & 0x00001800) == 0x00001800)
-		bigflash = 0;
-
-	init_sbc82xx_one_flash(sbc82xx_flash_map[0], mc->memc_br0, mc->memc_or0);
-	init_sbc82xx_one_flash(sbc82xx_flash_map[1], mc->memc_br6, mc->memc_or6);
-	init_sbc82xx_one_flash(sbc82xx_flash_map[2], mc->memc_br1, mc->memc_or1);
-
-#ifdef CONFIG_SBC8560
-	iounmap((void *) mc);
-#endif
-
-	for (i=0; i<3; i++) {
-		int8_t flashcs[3] = { 0, 6, 1 };
-		int nr_parts;
-
-		printk(KERN_NOTICE "PowerQUICC II %s (%ld MiB on CS%d",
-		       sbc82xx_flash_map[i].name,
-		       (sbc82xx_flash_map[i].size >> 20),
-		       flashcs[i]);
-		if (!sbc82xx_flash_map[i].phys) {
-			/* We know it can't be at zero. */
-			printk("): disabled by bootloader.\n");
-			continue;
-		}
-		printk(" at %08lx)\n",  sbc82xx_flash_map[i].phys);
-
-		sbc82xx_flash_map[i].virt = ioremap(sbc82xx_flash_map[i].phys, sbc82xx_flash_map[i].size);
-
-		if (!sbc82xx_flash_map[i].virt) {
-			printk("Failed to ioremap\n");
-			continue;
-		}
-
-		simple_map_init(&sbc82xx_flash_map[i]);
-
-		sbcmtd[i] = do_map_probe("cfi_probe", &sbc82xx_flash_map[i]);
-
-		if (!sbcmtd[i])
-			continue;
-
-		sbcmtd[i]->owner = THIS_MODULE;
-
-		nr_parts = parse_mtd_partitions(sbcmtd[i], part_probes,
-						&sbcmtd_parts[i], 0);
-		if (nr_parts > 0) {
-			add_mtd_partitions (sbcmtd[i], sbcmtd_parts[i], nr_parts);
-			continue;
-		}
-
-		/* No partitioning detected. Use default */
-		if (i == 2) {
-			add_mtd_device(sbcmtd[i]);
-		} else if (i == bigflash) {
-			add_mtd_partitions (sbcmtd[i], bigflash_parts, ARRAY_SIZE(bigflash_parts));
-		} else {
-			add_mtd_partitions (sbcmtd[i], smallflash_parts, ARRAY_SIZE(smallflash_parts));
-		}
-	}
-	return 0;
-}
-
-static void __exit cleanup_sbc82xx_flash(void)
-{
-	int i;
-
-	for (i=0; i<3; i++) {
-		if (!sbcmtd[i])
-			continue;
-
-		if (i<2 || sbcmtd_parts[i])
-			del_mtd_partitions(sbcmtd[i]);
-		else
-			del_mtd_device(sbcmtd[i]);
-
-		kfree(sbcmtd_parts[i]);
-		map_destroy(sbcmtd[i]);
-
-		iounmap((void *)sbc82xx_flash_map[i].virt);
-		sbc82xx_flash_map[i].virt = 0;
-	}
-}
-
-module_init(init_sbc82xx_flash);
-module_exit(cleanup_sbc82xx_flash);
-
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
-MODULE_DESCRIPTION("Flash map driver for WindRiver PowerQUICC II");
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index 03e19c1965c..43e30992a36 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -1,7 +1,21 @@
 /*
- * (C) 2003 David Woodhouse <dwmw2@infradead.org>
+ * Interface to Linux block layer for MTD 'translation layers'.
  *
- * Interface to Linux 2.5 block layer for MTD 'translation layers'.
+ * Copyright © 2003-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  *
  */
 
@@ -16,9 +30,7 @@
 #include <linux/blkpg.h>
 #include <linux/spinlock.h>
 #include <linux/hdreg.h>
-#include <linux/init.h>
 #include <linux/mutex.h>
-#include <linux/kthread.h>
 #include <asm/uaccess.h>
 
 #include "mtdcore.h"
@@ -26,7 +38,7 @@
 static LIST_HEAD(blktrans_majors);
 static DEFINE_MUTEX(blktrans_ref_mutex);
 
-void blktrans_dev_release(struct kref *kref)
+static void blktrans_dev_release(struct kref *kref)
 {
 	struct mtd_blktrans_dev *dev =
 		container_of(kref, struct mtd_blktrans_dev, ref);
@@ -53,7 +65,7 @@ unlock:
 	return dev;
 }
 
-void blktrans_dev_put(struct mtd_blktrans_dev *dev)
+static void blktrans_dev_put(struct mtd_blktrans_dev *dev)
 {
 	mutex_lock(&blktrans_ref_mutex);
 	kref_put(&dev->ref, blktrans_dev_release);
@@ -70,17 +82,19 @@ static int do_blktrans_request(struct mtd_blktrans_ops *tr,
 
 	block = blk_rq_pos(req) << 9 >> tr->blkshift;
 	nsect = blk_rq_cur_bytes(req) >> tr->blkshift;
+	buf = bio_data(req->bio);
 
-	buf = req->buffer;
-
-	if (!blk_fs_request(req))
+	if (req->cmd_type != REQ_TYPE_FS)
 		return -EIO;
 
+	if (req->cmd_flags & REQ_FLUSH)
+		return tr->flush(dev);
+
 	if (blk_rq_pos(req) + blk_rq_cur_sectors(req) >
 	    get_capacity(req->rq_disk))
 		return -EIO;
 
-	if (blk_discard_rq(req))
+	if (req->cmd_flags & REQ_DISCARD)
 		return tr->discard(dev, block, nsect);
 
 	switch(rq_data_dir(req)) {
@@ -105,23 +119,42 @@ static int do_blktrans_request(struct mtd_blktrans_ops *tr,
 	}
 }
 
-static int mtd_blktrans_thread(void *arg)
+int mtd_blktrans_cease_background(struct mtd_blktrans_dev *dev)
 {
-	struct mtd_blktrans_dev *dev = arg;
+	return dev->bg_stop;
+}
+EXPORT_SYMBOL_GPL(mtd_blktrans_cease_background);
+
+static void mtd_blktrans_work(struct work_struct *work)
+{
+	struct mtd_blktrans_dev *dev =
+		container_of(work, struct mtd_blktrans_dev, work);
+	struct mtd_blktrans_ops *tr = dev->tr;
 	struct request_queue *rq = dev->rq;
 	struct request *req = NULL;
+	int background_done = 0;
 
 	spin_lock_irq(rq->queue_lock);
 
-	while (!kthread_should_stop()) {
+	while (1) {
 		int res;
 
+		dev->bg_stop = false;
 		if (!req && !(req = blk_fetch_request(rq))) {
-			set_current_state(TASK_INTERRUPTIBLE);
-			spin_unlock_irq(rq->queue_lock);
-			schedule();
-			spin_lock_irq(rq->queue_lock);
-			continue;
+			if (tr->background && !background_done) {
+				spin_unlock_irq(rq->queue_lock);
+				mutex_lock(&dev->lock);
+				tr->background(dev);
+				mutex_unlock(&dev->lock);
+				spin_lock_irq(rq->queue_lock);
+				/*
+				 * Do background processing just once per idle
+				 * period.
+				 */
+				background_done = !dev->bg_stop;
+				continue;
+			}
+			break;
 		}
 
 		spin_unlock_irq(rq->queue_lock);
@@ -134,14 +167,14 @@ static int mtd_blktrans_thread(void *arg)
 
 		if (!__blk_end_request_cur(req, res))
 			req = NULL;
+
+		background_done = 0;
 	}
 
 	if (req)
 		__blk_end_request_all(req, -EIO);
 
 	spin_unlock_irq(rq->queue_lock);
-
-	return 0;
 }
 
 static void mtd_blktrans_request(struct request_queue *rq)
@@ -155,57 +188,79 @@ static void mtd_blktrans_request(struct request_queue *rq)
 		while ((req = blk_fetch_request(rq)) != NULL)
 			__blk_end_request_all(req, -ENODEV);
 	else
-		wake_up_process(dev->thread);
+		queue_work(dev->wq, &dev->work);
 }
 
 static int blktrans_open(struct block_device *bdev, fmode_t mode)
 {
 	struct mtd_blktrans_dev *dev = blktrans_dev_get(bdev->bd_disk);
-	int ret;
+	int ret = 0;
 
 	if (!dev)
-		return -ERESTARTSYS;
+		return -ERESTARTSYS; /* FIXME: busy loop! -arnd*/
 
 	mutex_lock(&dev->lock);
 
-	if (!dev->mtd) {
-		ret = -ENXIO;
+	if (dev->open)
+		goto unlock;
+
+	kref_get(&dev->ref);
+	__module_get(dev->tr->owner);
+
+	if (!dev->mtd)
 		goto unlock;
+
+	if (dev->tr->open) {
+		ret = dev->tr->open(dev);
+		if (ret)
+			goto error_put;
 	}
 
-	ret = !dev->open++ && dev->tr->open ? dev->tr->open(dev) : 0;
+	ret = __get_mtd_device(dev->mtd);
+	if (ret)
+		goto error_release;
+	dev->file_mode = mode;
 
-	/* Take another reference on the device so it won't go away till
-		last release */
-	if (!ret)
-		kref_get(&dev->ref);
 unlock:
+	dev->open++;
+	mutex_unlock(&dev->lock);
+	blktrans_dev_put(dev);
+	return ret;
+
+error_release:
+	if (dev->tr->release)
+		dev->tr->release(dev);
+error_put:
+	module_put(dev->tr->owner);
+	kref_put(&dev->ref, blktrans_dev_release);
 	mutex_unlock(&dev->lock);
 	blktrans_dev_put(dev);
 	return ret;
 }
 
-static int blktrans_release(struct gendisk *disk, fmode_t mode)
+static void blktrans_release(struct gendisk *disk, fmode_t mode)
 {
 	struct mtd_blktrans_dev *dev = blktrans_dev_get(disk);
-	int ret = -ENXIO;
 
 	if (!dev)
-		return ret;
+		return;
 
 	mutex_lock(&dev->lock);
 
-	/* Release one reference, we sure its not the last one here*/
-	kref_put(&dev->ref, blktrans_dev_release);
-
-	if (!dev->mtd)
+	if (--dev->open)
 		goto unlock;
 
-	ret = !--dev->open && dev->tr->release ? dev->tr->release(dev) : 0;
+	kref_put(&dev->ref, blktrans_dev_release);
+	module_put(dev->tr->owner);
+
+	if (dev->mtd) {
+		if (dev->tr->release)
+			dev->tr->release(dev);
+		__put_mtd_device(dev->mtd);
+	}
 unlock:
 	mutex_unlock(&dev->lock);
 	blktrans_dev_put(dev);
-	return ret;
 }
 
 static int blktrans_getgeo(struct block_device *bdev, struct hd_geometry *geo)
@@ -245,6 +300,7 @@ static int blktrans_ioctl(struct block_device *bdev, fmode_t mode,
 	switch (cmd) {
 	case BLKFLSBUF:
 		ret = dev->tr->flush ? dev->tr->flush(dev) : 0;
+		break;
 	default:
 		ret = -ENOTTY;
 	}
@@ -254,11 +310,11 @@ unlock:
 	return ret;
 }
 
-static const struct block_device_operations mtd_blktrans_ops = {
+static const struct block_device_operations mtd_block_ops = {
 	.owner		= THIS_MODULE,
 	.open		= blktrans_open,
 	.release	= blktrans_release,
-	.locked_ioctl	= blktrans_ioctl,
+	.ioctl		= blktrans_ioctl,
 	.getgeo		= blktrans_getgeo,
 };
 
@@ -330,7 +386,7 @@ int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new)
 	gd->private_data = new;
 	gd->major = tr->major;
 	gd->first_minor = (new->devnum) << tr->part_bits;
-	gd->fops = &mtd_blktrans_ops;
+	gd->fops = &mtd_block_ops;
 
 	if (tr->part_bits)
 		if (new->devnum < 26)
@@ -354,26 +410,28 @@ int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new)
 	if (!new->rq)
 		goto error3;
 
+	if (tr->flush)
+		blk_queue_flush(new->rq, REQ_FLUSH);
+
 	new->rq->queuedata = new;
 	blk_queue_logical_block_size(new->rq, tr->blksize);
 
-	if (tr->discard)
-		queue_flag_set_unlocked(QUEUE_FLAG_DISCARD,
-					new->rq);
+	queue_flag_set_unlocked(QUEUE_FLAG_NONROT, new->rq);
 
-	gd->queue = new->rq;
+	if (tr->discard) {
+		queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, new->rq);
+		new->rq->limits.max_discard_sectors = UINT_MAX;
+	}
 
-	__get_mtd_device(new->mtd);
-	__module_get(tr->owner);
+	gd->queue = new->rq;
 
-	/* Create processing thread */
-	/* TODO: workqueue ? */
-	new->thread = kthread_run(mtd_blktrans_thread, new,
-			"%s%d", tr->name, new->mtd->index);
-	if (IS_ERR(new->thread)) {
-		ret = PTR_ERR(new->thread);
+	/* Create processing workqueue */
+	new->wq = alloc_workqueue("%s%d", 0, 0,
+				  tr->name, new->mtd->index);
+	if (!new->wq)
 		goto error4;
-	}
+	INIT_WORK(&new->work, mtd_blktrans_work);
+
 	gd->driverfs_dev = &new->mtd->dev;
 
 	if (new->readonly)
@@ -388,15 +446,12 @@ int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new)
 	}
 	return 0;
 error4:
-	module_put(tr->owner);
-	__put_mtd_device(new->mtd);
 	blk_cleanup_queue(new->rq);
 error3:
 	put_disk(new->disk);
 error2:
 	list_del(&new->list);
 error1:
-	kfree(new);
 	return ret;
 }
 
@@ -409,15 +464,15 @@ int del_mtd_blktrans_dev(struct mtd_blktrans_dev *old)
 		BUG();
 	}
 
-	/* Stop new requests to arrive */
-	del_gendisk(old->disk);
-
 	if (old->disk_attributes)
 		sysfs_remove_group(&disk_to_dev(old->disk)->kobj,
 						old->disk_attributes);
 
-	/* Stop the thread */
-	kthread_stop(old->thread);
+	/* Stop new requests to arrive */
+	del_gendisk(old->disk);
+
+	/* Stop workqueue. This will perform any pending request. */
+	destroy_workqueue(old->wq);
 
 	/* Kill current requests */
 	spin_lock_irqsave(&old->queue_lock, flags);
@@ -425,17 +480,15 @@ int del_mtd_blktrans_dev(struct mtd_blktrans_dev *old)
 	blk_start_queue(old->rq);
 	spin_unlock_irqrestore(&old->queue_lock, flags);
 
-	/* Ask trans driver for release to the mtd device */
+	/* If the device is currently open, tell trans driver to close it,
+		then put mtd device, and don't touch it again */
 	mutex_lock(&old->lock);
-	if (old->open && old->tr->release) {
-		old->tr->release(old);
-		old->open = 0;
+	if (old->open) {
+		if (old->tr->release)
+			old->tr->release(old);
+		__put_mtd_device(old->mtd);
 	}
 
-	__put_mtd_device(old->mtd);
-	module_put(old->tr->owner);
-
-	/* At that point, we don't touch the mtd anymore */
 	old->mtd = NULL;
 
 	mutex_unlock(&old->lock);
@@ -485,13 +538,16 @@ int register_mtd_blktrans(struct mtd_blktrans_ops *tr)
 	mutex_lock(&mtd_table_mutex);
 
 	ret = register_blkdev(tr->major, tr->name);
-	if (ret) {
+	if (ret < 0) {
 		printk(KERN_WARNING "Unable to register %s block device on major %d: %d\n",
 		       tr->name, tr->major, ret);
 		mutex_unlock(&mtd_table_mutex);
 		return ret;
 	}
 
+	if (ret)
+		tr->major = ret;
+
 	tr->blkshift = ffs(tr->blksize) - 1;
 
 	INIT_LIST_HEAD(&tr->devs);
diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c
index e6edbec609f..485ea751c7f 100644
--- a/drivers/mtd/mtdblock.c
+++ b/drivers/mtd/mtdblock.c
@@ -1,8 +1,23 @@
 /*
  * Direct MTD block device access
  *
- * (C) 2000-2003 Nicolas Pitre <nico@fluxnic.net>
- * (C) 1999-2003 David Woodhouse <dwmw2@infradead.org>
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ * Copyright © 2000-2003 Nicolas Pitre <nico@fluxnic.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
  */
 
 #include <linux/fs.h>
@@ -17,6 +32,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/blktrans.h>
 #include <linux/mutex.h>
+#include <linux/major.h>
 
 
 struct mtdblk_dev {
@@ -29,7 +45,7 @@ struct mtdblk_dev {
 	enum { STATE_EMPTY, STATE_CLEAN, STATE_DIRTY } cache_state;
 };
 
-static struct mutex mtdblks_lock;
+static DEFINE_MUTEX(mtdblks_lock);
 
 /*
  * Cache stuff...
@@ -70,7 +86,7 @@ static int erase_write (struct mtd_info *mtd, unsigned long pos,
 	set_current_state(TASK_INTERRUPTIBLE);
 	add_wait_queue(&wait_q, &wait);
 
-	ret = mtd->erase(mtd, &erase);
+	ret = mtd_erase(mtd, &erase);
 	if (ret) {
 		set_current_state(TASK_RUNNING);
 		remove_wait_queue(&wait_q, &wait);
@@ -87,7 +103,7 @@ static int erase_write (struct mtd_info *mtd, unsigned long pos,
 	 * Next, write the data to flash.
 	 */
 
-	ret = mtd->write(mtd, pos, len, &retlen, buf);
+	ret = mtd_write(mtd, pos, len, &retlen, buf);
 	if (ret)
 		return ret;
 	if (retlen != len)
@@ -104,7 +120,7 @@ static int write_cached_data (struct mtdblk_dev *mtdblk)
 	if (mtdblk->cache_state != STATE_DIRTY)
 		return 0;
 
-	DEBUG(MTD_DEBUG_LEVEL2, "mtdblock: writing cached data for \"%s\" "
+	pr_debug("mtdblock: writing cached data for \"%s\" "
 			"at 0x%lx, size 0x%x\n", mtd->name,
 			mtdblk->cache_offset, mtdblk->cache_size);
 
@@ -114,7 +130,7 @@ static int write_cached_data (struct mtdblk_dev *mtdblk)
 		return ret;
 
 	/*
-	 * Here we could argubly set the cache state to STATE_CLEAN.
+	 * Here we could arguably set the cache state to STATE_CLEAN.
 	 * However this could lead to inconsistency since we will not
 	 * be notified if this content is altered on the flash by other
 	 * means.  Let's declare it empty and leave buffering tasks to
@@ -133,11 +149,11 @@ static int do_cached_write (struct mtdblk_dev *mtdblk, unsigned long pos,
 	size_t retlen;
 	int ret;
 
-	DEBUG(MTD_DEBUG_LEVEL2, "mtdblock: write on \"%s\" at 0x%lx, size 0x%x\n",
+	pr_debug("mtdblock: write on \"%s\" at 0x%lx, size 0x%x\n",
 		mtd->name, pos, len);
 
 	if (!sect_size)
-		return mtd->write(mtd, pos, len, &retlen, buf);
+		return mtd_write(mtd, pos, len, &retlen, buf);
 
 	while (len > 0) {
 		unsigned long sect_start = (pos/sect_size)*sect_size;
@@ -169,8 +185,8 @@ static int do_cached_write (struct mtdblk_dev *mtdblk, unsigned long pos,
 			    mtdblk->cache_offset != sect_start) {
 				/* fill the cache with the current sector */
 				mtdblk->cache_state = STATE_EMPTY;
-				ret = mtd->read(mtd, sect_start, sect_size,
-						&retlen, mtdblk->cache_data);
+				ret = mtd_read(mtd, sect_start, sect_size,
+					       &retlen, mtdblk->cache_data);
 				if (ret)
 					return ret;
 				if (retlen != sect_size)
@@ -203,11 +219,11 @@ static int do_cached_read (struct mtdblk_dev *mtdblk, unsigned long pos,
 	size_t retlen;
 	int ret;
 
-	DEBUG(MTD_DEBUG_LEVEL2, "mtdblock: read on \"%s\" at 0x%lx, size 0x%x\n",
+	pr_debug("mtdblock: read on \"%s\" at 0x%lx, size 0x%x\n",
 			mtd->name, pos, len);
 
 	if (!sect_size)
-		return mtd->read(mtd, pos, len, &retlen, buf);
+		return mtd_read(mtd, pos, len, &retlen, buf);
 
 	while (len > 0) {
 		unsigned long sect_start = (pos/sect_size)*sect_size;
@@ -226,7 +242,7 @@ static int do_cached_read (struct mtdblk_dev *mtdblk, unsigned long pos,
 		    mtdblk->cache_offset == sect_start) {
 			memcpy (buf, mtdblk->cache_data + offset, size);
 		} else {
-			ret = mtd->read(mtd, pos, size, &retlen, buf);
+			ret = mtd_read(mtd, pos, size, &retlen, buf);
 			if (ret)
 				return ret;
 			if (retlen != size)
@@ -268,7 +284,7 @@ static int mtdblock_open(struct mtd_blktrans_dev *mbd)
 {
 	struct mtdblk_dev *mtdblk = container_of(mbd, struct mtdblk_dev, mbd);
 
-	DEBUG(MTD_DEBUG_LEVEL1,"mtdblock_open\n");
+	pr_debug("mtdblock_open\n");
 
 	mutex_lock(&mtdblks_lock);
 	if (mtdblk->count) {
@@ -288,16 +304,16 @@ static int mtdblock_open(struct mtd_blktrans_dev *mbd)
 
 	mutex_unlock(&mtdblks_lock);
 
-	DEBUG(MTD_DEBUG_LEVEL1, "ok\n");
+	pr_debug("ok\n");
 
 	return 0;
 }
 
-static int mtdblock_release(struct mtd_blktrans_dev *mbd)
+static void mtdblock_release(struct mtd_blktrans_dev *mbd)
 {
 	struct mtdblk_dev *mtdblk = container_of(mbd, struct mtdblk_dev, mbd);
 
-   	DEBUG(MTD_DEBUG_LEVEL1, "mtdblock_release\n");
+	pr_debug("mtdblock_release\n");
 
 	mutex_lock(&mtdblks_lock);
 
@@ -306,17 +322,18 @@ static int mtdblock_release(struct mtd_blktrans_dev *mbd)
 	mutex_unlock(&mtdblk->cache_mutex);
 
 	if (!--mtdblk->count) {
-		/* It was the last usage. Free the cache */
-		if (mbd->mtd->sync)
-			mbd->mtd->sync(mbd->mtd);
+		/*
+		 * It was the last usage. Free the cache, but only sync if
+		 * opened for writing.
+		 */
+		if (mbd->file_mode & FMODE_WRITE)
+			mtd_sync(mbd->mtd);
 		vfree(mtdblk->cache_data);
 	}
 
 	mutex_unlock(&mtdblks_lock);
 
-	DEBUG(MTD_DEBUG_LEVEL1, "ok\n");
-
-	return 0;
+	pr_debug("ok\n");
 }
 
 static int mtdblock_flush(struct mtd_blktrans_dev *dev)
@@ -326,9 +343,7 @@ static int mtdblock_flush(struct mtd_blktrans_dev *dev)
 	mutex_lock(&mtdblk->cache_mutex);
 	write_cached_data(mtdblk);
 	mutex_unlock(&mtdblk->cache_mutex);
-
-	if (dev->mtd->sync)
-		dev->mtd->sync(dev->mtd);
+	mtd_sync(dev->mtd);
 	return 0;
 }
 
@@ -359,7 +374,7 @@ static void mtdblock_remove_dev(struct mtd_blktrans_dev *dev)
 
 static struct mtd_blktrans_ops mtdblock_tr = {
 	.name		= "mtdblock",
-	.major		= 31,
+	.major		= MTD_BLOCK_MAJOR,
 	.part_bits	= 0,
 	.blksize 	= 512,
 	.open		= mtdblock_open,
@@ -374,8 +389,6 @@ static struct mtd_blktrans_ops mtdblock_tr = {
 
 static int __init init_mtdblock(void)
 {
-	mutex_init(&mtdblks_lock);
-
 	return register_mtd_blktrans(&mtdblock_tr);
 }
 
diff --git a/drivers/mtd/mtdblock_ro.c b/drivers/mtd/mtdblock_ro.c
index d0d3f79f9d0..fb5dc89369d 100644
--- a/drivers/mtd/mtdblock_ro.c
+++ b/drivers/mtd/mtdblock_ro.c
@@ -1,20 +1,37 @@
 /*
- * (C) 2003 David Woodhouse <dwmw2@infradead.org>
- *
  * Simple read-only (writable only for RAM) mtdblock driver
+ *
+ * Copyright © 2001-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
  */
 
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/blktrans.h>
+#include <linux/module.h>
+#include <linux/major.h>
 
 static int mtdblock_readsect(struct mtd_blktrans_dev *dev,
 			      unsigned long block, char *buf)
 {
 	size_t retlen;
 
-	if (dev->mtd->read(dev->mtd, (block * 512), 512, &retlen, buf))
+	if (mtd_read(dev->mtd, (block * 512), 512, &retlen, buf))
 		return 1;
 	return 0;
 }
@@ -24,7 +41,7 @@ static int mtdblock_writesect(struct mtd_blktrans_dev *dev,
 {
 	size_t retlen;
 
-	if (dev->mtd->write(dev->mtd, (block * 512), 512, &retlen, buf))
+	if (mtd_write(dev->mtd, (block * 512), 512, &retlen, buf))
 		return 1;
 	return 0;
 }
@@ -54,7 +71,7 @@ static void mtdblock_remove_dev(struct mtd_blktrans_dev *dev)
 
 static struct mtd_blktrans_ops mtdblock_tr = {
 	.name		= "mtdblock",
-	.major		= 31,
+	.major		= MTD_BLOCK_MAJOR,
 	.part_bits	= 0,
 	.blksize 	= 512,
 	.readsect	= mtdblock_readsect,
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 91c8013cf0d..a0f54e80670 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -1,5 +1,19 @@
 /*
- * Character-device access to raw MTD devices.
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  *
  */
 
@@ -12,22 +26,26 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
+#include <linux/mutex.h>
 #include <linux/backing-dev.h>
 #include <linux/compat.h>
 #include <linux/mount.h>
-
+#include <linux/blkpg.h>
+#include <linux/magic.h>
+#include <linux/major.h>
 #include <linux/mtd/mtd.h>
-#include <linux/mtd/compatmac.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/map.h>
 
 #include <asm/uaccess.h>
 
-#define MTD_INODE_FS_MAGIC 0x11307854
-static struct vfsmount *mtd_inode_mnt __read_mostly;
+#include "mtdcore.h"
+
+static DEFINE_MUTEX(mtd_mutex);
 
 /*
  * Data structure to hold the pointer to the mtd device as well
- * as mode information ofr various use cases.
+ * as mode information of various use cases.
  */
 struct mtd_file_info {
 	struct mtd_info *mtd;
@@ -35,33 +53,17 @@ struct mtd_file_info {
 	enum mtd_file_modes mode;
 };
 
-static loff_t mtd_lseek (struct file *file, loff_t offset, int orig)
+static loff_t mtdchar_lseek(struct file *file, loff_t offset, int orig)
 {
 	struct mtd_file_info *mfi = file->private_data;
-	struct mtd_info *mtd = mfi->mtd;
-
-	switch (orig) {
-	case SEEK_SET:
-		break;
-	case SEEK_CUR:
-		offset += file->f_pos;
-		break;
-	case SEEK_END:
-		offset += mtd->size;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (offset >= 0 && offset <= mtd->size)
-		return file->f_pos = offset;
-
-	return -EINVAL;
+	return fixed_size_llseek(file, offset, orig, mfi->mtd->size);
 }
 
+static int count;
+static struct vfsmount *mnt;
+static struct file_system_type mtd_inodefs_type;
 
-
-static int mtd_open(struct inode *inode, struct file *file)
+static int mtdchar_open(struct inode *inode, struct file *file)
 {
 	int minor = iminor(inode);
 	int devnum = minor >> 1;
@@ -70,13 +72,17 @@ static int mtd_open(struct inode *inode, struct file *file)
 	struct mtd_file_info *mfi;
 	struct inode *mtd_ino;
 
-	DEBUG(MTD_DEBUG_LEVEL0, "MTD_open\n");
+	pr_debug("MTD_open\n");
 
 	/* You can't open the RO devices RW */
 	if ((file->f_mode & FMODE_WRITE) && (minor & 1))
 		return -EACCES;
 
-	lock_kernel();
+	ret = simple_pin_fs(&mtd_inodefs_type, &mnt, &count);
+	if (ret)
+		return ret;
+
+	mutex_lock(&mtd_mutex);
 	mtd = get_mtd_device(NULL, devnum);
 
 	if (IS_ERR(mtd)) {
@@ -85,16 +91,14 @@ static int mtd_open(struct inode *inode, struct file *file)
 	}
 
 	if (mtd->type == MTD_ABSENT) {
-		put_mtd_device(mtd);
 		ret = -ENODEV;
-		goto out;
+		goto out1;
 	}
 
-	mtd_ino = iget_locked(mtd_inode_mnt->mnt_sb, devnum);
+	mtd_ino = iget_locked(mnt->mnt_sb, devnum);
 	if (!mtd_ino) {
-		put_mtd_device(mtd);
 		ret = -ENOMEM;
-		goto out;
+		goto out1;
 	}
 	if (mtd_ino->i_state & I_NEW) {
 		mtd_ino->i_private = mtd;
@@ -106,66 +110,85 @@ static int mtd_open(struct inode *inode, struct file *file)
 
 	/* You can't open it RW if it's not a writeable device */
 	if ((file->f_mode & FMODE_WRITE) && !(mtd->flags & MTD_WRITEABLE)) {
-		iput(mtd_ino);
-		put_mtd_device(mtd);
 		ret = -EACCES;
-		goto out;
+		goto out2;
 	}
 
 	mfi = kzalloc(sizeof(*mfi), GFP_KERNEL);
 	if (!mfi) {
-		iput(mtd_ino);
-		put_mtd_device(mtd);
 		ret = -ENOMEM;
-		goto out;
+		goto out2;
 	}
 	mfi->ino = mtd_ino;
 	mfi->mtd = mtd;
 	file->private_data = mfi;
+	mutex_unlock(&mtd_mutex);
+	return 0;
 
+out2:
+	iput(mtd_ino);
+out1:
+	put_mtd_device(mtd);
 out:
-	unlock_kernel();
+	mutex_unlock(&mtd_mutex);
+	simple_release_fs(&mnt, &count);
 	return ret;
-} /* mtd_open */
+} /* mtdchar_open */
 
 /*====================================================================*/
 
-static int mtd_close(struct inode *inode, struct file *file)
+static int mtdchar_close(struct inode *inode, struct file *file)
 {
 	struct mtd_file_info *mfi = file->private_data;
 	struct mtd_info *mtd = mfi->mtd;
 
-	DEBUG(MTD_DEBUG_LEVEL0, "MTD_close\n");
+	pr_debug("MTD_close\n");
 
 	/* Only sync if opened RW */
-	if ((file->f_mode & FMODE_WRITE) && mtd->sync)
-		mtd->sync(mtd);
+	if ((file->f_mode & FMODE_WRITE))
+		mtd_sync(mtd);
 
 	iput(mfi->ino);
 
 	put_mtd_device(mtd);
 	file->private_data = NULL;
 	kfree(mfi);
+	simple_release_fs(&mnt, &count);
 
 	return 0;
-} /* mtd_close */
+} /* mtdchar_close */
 
-/* FIXME: This _really_ needs to die. In 2.5, we should lock the
-   userspace buffer down and use it directly with readv/writev.
-*/
-#define MAX_KMALLOC_SIZE 0x20000
+/* Back in June 2001, dwmw2 wrote:
+ *
+ *   FIXME: This _really_ needs to die. In 2.5, we should lock the
+ *   userspace buffer down and use it directly with readv/writev.
+ *
+ * The implementation below, using mtd_kmalloc_up_to, mitigates
+ * allocation failures when the system is under low-memory situations
+ * or if memory is highly fragmented at the cost of reducing the
+ * performance of the requested transfer due to a smaller buffer size.
+ *
+ * A more complex but more memory-efficient implementation based on
+ * get_user_pages and iovecs to cover extents of those pages is a
+ * longer-term goal, as intimated by dwmw2 above. However, for the
+ * write case, this requires yet more complex head and tail transfer
+ * handling when those head and tail offsets and sizes are such that
+ * alignment requirements are not met in the NAND subdriver.
+ */
 
-static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t *ppos)
+static ssize_t mtdchar_read(struct file *file, char __user *buf, size_t count,
+			loff_t *ppos)
 {
 	struct mtd_file_info *mfi = file->private_data;
 	struct mtd_info *mtd = mfi->mtd;
-	size_t retlen=0;
+	size_t retlen;
 	size_t total_retlen=0;
 	int ret=0;
 	int len;
+	size_t size = count;
 	char *kbuf;
 
-	DEBUG(MTD_DEBUG_LEVEL0,"MTD_read\n");
+	pr_debug("MTD_read\n");
 
 	if (*ppos + count > mtd->size)
 		count = mtd->size - *ppos;
@@ -173,57 +196,48 @@ static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t
 	if (!count)
 		return 0;
 
-	/* FIXME: Use kiovec in 2.5 to lock down the user's buffers
-	   and pass them directly to the MTD functions */
-
-	if (count > MAX_KMALLOC_SIZE)
-		kbuf=kmalloc(MAX_KMALLOC_SIZE, GFP_KERNEL);
-	else
-		kbuf=kmalloc(count, GFP_KERNEL);
-
+	kbuf = mtd_kmalloc_up_to(mtd, &size);
 	if (!kbuf)
 		return -ENOMEM;
 
 	while (count) {
-
-		if (count > MAX_KMALLOC_SIZE)
-			len = MAX_KMALLOC_SIZE;
-		else
-			len = count;
+		len = min_t(size_t, count, size);
 
 		switch (mfi->mode) {
-		case MTD_MODE_OTP_FACTORY:
-			ret = mtd->read_fact_prot_reg(mtd, *ppos, len, &retlen, kbuf);
+		case MTD_FILE_MODE_OTP_FACTORY:
+			ret = mtd_read_fact_prot_reg(mtd, *ppos, len,
+						     &retlen, kbuf);
 			break;
-		case MTD_MODE_OTP_USER:
-			ret = mtd->read_user_prot_reg(mtd, *ppos, len, &retlen, kbuf);
+		case MTD_FILE_MODE_OTP_USER:
+			ret = mtd_read_user_prot_reg(mtd, *ppos, len,
+						     &retlen, kbuf);
 			break;
-		case MTD_MODE_RAW:
+		case MTD_FILE_MODE_RAW:
 		{
 			struct mtd_oob_ops ops;
 
-			ops.mode = MTD_OOB_RAW;
+			ops.mode = MTD_OPS_RAW;
 			ops.datbuf = kbuf;
 			ops.oobbuf = NULL;
 			ops.len = len;
 
-			ret = mtd->read_oob(mtd, *ppos, &ops);
+			ret = mtd_read_oob(mtd, *ppos, &ops);
 			retlen = ops.retlen;
 			break;
 		}
 		default:
-			ret = mtd->read(mtd, *ppos, len, &retlen, kbuf);
+			ret = mtd_read(mtd, *ppos, len, &retlen, kbuf);
 		}
-		/* Nand returns -EBADMSG on ecc errors, but it returns
+		/* Nand returns -EBADMSG on ECC errors, but it returns
 		 * the data. For our userspace tools it is important
-		 * to dump areas with ecc errors !
+		 * to dump areas with ECC errors!
 		 * For kernel internal usage it also might return -EUCLEAN
-		 * to signal the caller that a bitflip has occured and has
+		 * to signal the caller that a bitflip has occurred and has
 		 * been corrected by the ECC algorithm.
 		 * Userspace software which accesses NAND this way
 		 * must be aware of the fact that it deals with NAND
 		 */
-		if (!ret || (ret == -EUCLEAN) || (ret == -EBADMSG)) {
+		if (!ret || mtd_is_bitflip_or_eccerr(ret)) {
 			*ppos += retlen;
 			if (copy_to_user(buf, kbuf, retlen)) {
 				kfree(kbuf);
@@ -246,19 +260,21 @@ static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t
 
 	kfree(kbuf);
 	return total_retlen;
-} /* mtd_read */
+} /* mtdchar_read */
 
-static ssize_t mtd_write(struct file *file, const char __user *buf, size_t count,loff_t *ppos)
+static ssize_t mtdchar_write(struct file *file, const char __user *buf, size_t count,
+			loff_t *ppos)
 {
 	struct mtd_file_info *mfi = file->private_data;
 	struct mtd_info *mtd = mfi->mtd;
+	size_t size = count;
 	char *kbuf;
 	size_t retlen;
 	size_t total_retlen=0;
 	int ret=0;
 	int len;
 
-	DEBUG(MTD_DEBUG_LEVEL0,"MTD_write\n");
+	pr_debug("MTD_write\n");
 
 	if (*ppos == mtd->size)
 		return -ENOSPC;
@@ -269,20 +285,12 @@ static ssize_t mtd_write(struct file *file, const char __user *buf, size_t count
 	if (!count)
 		return 0;
 
-	if (count > MAX_KMALLOC_SIZE)
-		kbuf=kmalloc(MAX_KMALLOC_SIZE, GFP_KERNEL);
-	else
-		kbuf=kmalloc(count, GFP_KERNEL);
-
+	kbuf = mtd_kmalloc_up_to(mtd, &size);
 	if (!kbuf)
 		return -ENOMEM;
 
 	while (count) {
-
-		if (count > MAX_KMALLOC_SIZE)
-			len = MAX_KMALLOC_SIZE;
-		else
-			len = count;
+		len = min_t(size_t, count, size);
 
 		if (copy_from_user(kbuf, buf, len)) {
 			kfree(kbuf);
@@ -290,34 +298,41 @@ static ssize_t mtd_write(struct file *file, const char __user *buf, size_t count
 		}
 
 		switch (mfi->mode) {
-		case MTD_MODE_OTP_FACTORY:
+		case MTD_FILE_MODE_OTP_FACTORY:
 			ret = -EROFS;
 			break;
-		case MTD_MODE_OTP_USER:
-			if (!mtd->write_user_prot_reg) {
-				ret = -EOPNOTSUPP;
-				break;
-			}
-			ret = mtd->write_user_prot_reg(mtd, *ppos, len, &retlen, kbuf);
+		case MTD_FILE_MODE_OTP_USER:
+			ret = mtd_write_user_prot_reg(mtd, *ppos, len,
+						      &retlen, kbuf);
 			break;
 
-		case MTD_MODE_RAW:
+		case MTD_FILE_MODE_RAW:
 		{
 			struct mtd_oob_ops ops;
 
-			ops.mode = MTD_OOB_RAW;
+			ops.mode = MTD_OPS_RAW;
 			ops.datbuf = kbuf;
 			ops.oobbuf = NULL;
+			ops.ooboffs = 0;
 			ops.len = len;
 
-			ret = mtd->write_oob(mtd, *ppos, &ops);
+			ret = mtd_write_oob(mtd, *ppos, &ops);
 			retlen = ops.retlen;
 			break;
 		}
 
 		default:
-			ret = (*(mtd->write))(mtd, *ppos, len, &retlen, kbuf);
+			ret = mtd_write(mtd, *ppos, len, &retlen, kbuf);
 		}
+
+		/*
+		 * Return -ENOSPC only if no data could be written at all.
+		 * Otherwise just return the number of bytes that actually
+		 * have been written.
+		 */
+		if ((ret == -ENOSPC) && (total_retlen))
+			break;
+
 		if (!ret) {
 			*ppos += retlen;
 			total_retlen += retlen;
@@ -332,7 +347,7 @@ static ssize_t mtd_write(struct file *file, const char __user *buf, size_t count
 
 	kfree(kbuf);
 	return total_retlen;
-} /* mtd_write */
+} /* mtdchar_write */
 
 /*======================================================================
 
@@ -344,40 +359,41 @@ static void mtdchar_erase_callback (struct erase_info *instr)
 	wake_up((wait_queue_head_t *)instr->priv);
 }
 
-#ifdef CONFIG_HAVE_MTD_OTP
 static int otp_select_filemode(struct mtd_file_info *mfi, int mode)
 {
 	struct mtd_info *mtd = mfi->mtd;
-	int ret = 0;
+	size_t retlen;
 
 	switch (mode) {
 	case MTD_OTP_FACTORY:
-		if (!mtd->read_fact_prot_reg)
-			ret = -EOPNOTSUPP;
-		else
-			mfi->mode = MTD_MODE_OTP_FACTORY;
+		if (mtd_read_fact_prot_reg(mtd, -1, 0, &retlen, NULL) ==
+				-EOPNOTSUPP)
+			return -EOPNOTSUPP;
+
+		mfi->mode = MTD_FILE_MODE_OTP_FACTORY;
 		break;
 	case MTD_OTP_USER:
-		if (!mtd->read_fact_prot_reg)
-			ret = -EOPNOTSUPP;
-		else
-			mfi->mode = MTD_MODE_OTP_USER;
+		if (mtd_read_user_prot_reg(mtd, -1, 0, &retlen, NULL) ==
+				-EOPNOTSUPP)
+			return -EOPNOTSUPP;
+
+		mfi->mode = MTD_FILE_MODE_OTP_USER;
 		break;
-	default:
-		ret = -EINVAL;
 	case MTD_OTP_OFF:
+		mfi->mode = MTD_FILE_MODE_NORMAL;
 		break;
+	default:
+		return -EINVAL;
 	}
-	return ret;
+
+	return 0;
 }
-#else
-# define otp_select_filemode(f,m)	-EOPNOTSUPP
-#endif
 
-static int mtd_do_writeoob(struct file *file, struct mtd_info *mtd,
+static int mtdchar_writeoob(struct file *file, struct mtd_info *mtd,
 	uint64_t start, uint32_t length, void __user *ptr,
 	uint32_t __user *retp)
 {
+	struct mtd_file_info *mfi = file->private_data;
 	struct mtd_oob_ops ops;
 	uint32_t retlen;
 	int ret = 0;
@@ -388,7 +404,7 @@ static int mtd_do_writeoob(struct file *file, struct mtd_info *mtd,
 	if (length > 4096)
 		return -EINVAL;
 
-	if (!mtd->write_oob)
+	if (!mtd->_write_oob)
 		ret = -EOPNOTSUPP;
 	else
 		ret = access_ok(VERIFY_READ, ptr, length) ? 0 : -EFAULT;
@@ -397,9 +413,10 @@ static int mtd_do_writeoob(struct file *file, struct mtd_info *mtd,
 		return ret;
 
 	ops.ooblen = length;
-	ops.ooboffs = start & (mtd->oobsize - 1);
+	ops.ooboffs = start & (mtd->writesize - 1);
 	ops.datbuf = NULL;
-	ops.mode = MTD_OOB_PLACE;
+	ops.mode = (mfi->mode == MTD_FILE_MODE_RAW) ? MTD_OPS_RAW :
+		MTD_OPS_PLACE_OOB;
 
 	if (ops.ooboffs && ops.ooblen > (mtd->oobsize - ops.ooboffs))
 		return -EINVAL;
@@ -408,8 +425,8 @@ static int mtd_do_writeoob(struct file *file, struct mtd_info *mtd,
 	if (IS_ERR(ops.oobbuf))
 		return PTR_ERR(ops.oobbuf);
 
-	start &= ~((uint64_t)mtd->oobsize - 1);
-	ret = mtd->write_oob(mtd, start, &ops);
+	start &= ~((uint64_t)mtd->writesize - 1);
+	ret = mtd_write_oob(mtd, start, &ops);
 
 	if (ops.oobretlen > 0xFFFFFFFFU)
 		ret = -EOVERFLOW;
@@ -421,27 +438,25 @@ static int mtd_do_writeoob(struct file *file, struct mtd_info *mtd,
 	return ret;
 }
 
-static int mtd_do_readoob(struct mtd_info *mtd, uint64_t start,
-	uint32_t length, void __user *ptr, uint32_t __user *retp)
+static int mtdchar_readoob(struct file *file, struct mtd_info *mtd,
+	uint64_t start, uint32_t length, void __user *ptr,
+	uint32_t __user *retp)
 {
+	struct mtd_file_info *mfi = file->private_data;
 	struct mtd_oob_ops ops;
 	int ret = 0;
 
 	if (length > 4096)
 		return -EINVAL;
 
-	if (!mtd->read_oob)
-		ret = -EOPNOTSUPP;
-	else
-		ret = access_ok(VERIFY_WRITE, ptr,
-				length) ? 0 : -EFAULT;
-	if (ret)
-		return ret;
+	if (!access_ok(VERIFY_WRITE, ptr, length))
+		return -EFAULT;
 
 	ops.ooblen = length;
-	ops.ooboffs = start & (mtd->oobsize - 1);
+	ops.ooboffs = start & (mtd->writesize - 1);
 	ops.datbuf = NULL;
-	ops.mode = MTD_OOB_PLACE;
+	ops.mode = (mfi->mode == MTD_FILE_MODE_RAW) ? MTD_OPS_RAW :
+		MTD_OPS_PLACE_OOB;
 
 	if (ops.ooboffs && ops.ooblen > (mtd->oobsize - ops.ooboffs))
 		return -EINVAL;
@@ -450,8 +465,8 @@ static int mtd_do_readoob(struct mtd_info *mtd, uint64_t start,
 	if (!ops.oobbuf)
 		return -ENOMEM;
 
-	start &= ~((uint64_t)mtd->oobsize - 1);
-	ret = mtd->read_oob(mtd, start, &ops);
+	start &= ~((uint64_t)mtd->writesize - 1);
+	ret = mtd_read_oob(mtd, start, &ops);
 
 	if (put_user(ops.oobretlen, retp))
 		ret = -EFAULT;
@@ -460,10 +475,146 @@ static int mtd_do_readoob(struct mtd_info *mtd, uint64_t start,
 		ret = -EFAULT;
 
 	kfree(ops.oobbuf);
+
+	/*
+	 * NAND returns -EBADMSG on ECC errors, but it returns the OOB
+	 * data. For our userspace tools it is important to dump areas
+	 * with ECC errors!
+	 * For kernel internal usage it also might return -EUCLEAN
+	 * to signal the caller that a bitflip has occured and has
+	 * been corrected by the ECC algorithm.
+	 *
+	 * Note: currently the standard NAND function, nand_read_oob_std,
+	 * does not calculate ECC for the OOB area, so do not rely on
+	 * this behavior unless you have replaced it with your own.
+	 */
+	if (mtd_is_bitflip_or_eccerr(ret))
+		return 0;
+
 	return ret;
 }
 
-static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
+/*
+ * Copies (and truncates, if necessary) data from the larger struct,
+ * nand_ecclayout, to the smaller, deprecated layout struct,
+ * nand_ecclayout_user. This is necessary only to support the deprecated
+ * API ioctl ECCGETLAYOUT while allowing all new functionality to use
+ * nand_ecclayout flexibly (i.e. the struct may change size in new
+ * releases without requiring major rewrites).
+ */
+static int shrink_ecclayout(const struct nand_ecclayout *from,
+		struct nand_ecclayout_user *to)
+{
+	int i;
+
+	if (!from || !to)
+		return -EINVAL;
+
+	memset(to, 0, sizeof(*to));
+
+	to->eccbytes = min((int)from->eccbytes, MTD_MAX_ECCPOS_ENTRIES);
+	for (i = 0; i < to->eccbytes; i++)
+		to->eccpos[i] = from->eccpos[i];
+
+	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES; i++) {
+		if (from->oobfree[i].length == 0 &&
+				from->oobfree[i].offset == 0)
+			break;
+		to->oobavail += from->oobfree[i].length;
+		to->oobfree[i] = from->oobfree[i];
+	}
+
+	return 0;
+}
+
+static int mtdchar_blkpg_ioctl(struct mtd_info *mtd,
+			   struct blkpg_ioctl_arg __user *arg)
+{
+	struct blkpg_ioctl_arg a;
+	struct blkpg_partition p;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	if (copy_from_user(&a, arg, sizeof(struct blkpg_ioctl_arg)))
+		return -EFAULT;
+
+	if (copy_from_user(&p, a.data, sizeof(struct blkpg_partition)))
+		return -EFAULT;
+
+	switch (a.op) {
+	case BLKPG_ADD_PARTITION:
+
+		/* Only master mtd device must be used to add partitions */
+		if (mtd_is_partition(mtd))
+			return -EINVAL;
+
+		return mtd_add_partition(mtd, p.devname, p.start, p.length);
+
+	case BLKPG_DEL_PARTITION:
+
+		if (p.pno < 0)
+			return -EINVAL;
+
+		return mtd_del_partition(mtd, p.pno);
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int mtdchar_write_ioctl(struct mtd_info *mtd,
+		struct mtd_write_req __user *argp)
+{
+	struct mtd_write_req req;
+	struct mtd_oob_ops ops;
+	const void __user *usr_data, *usr_oob;
+	int ret;
+
+	if (copy_from_user(&req, argp, sizeof(req)))
+		return -EFAULT;
+
+	usr_data = (const void __user *)(uintptr_t)req.usr_data;
+	usr_oob = (const void __user *)(uintptr_t)req.usr_oob;
+	if (!access_ok(VERIFY_READ, usr_data, req.len) ||
+	    !access_ok(VERIFY_READ, usr_oob, req.ooblen))
+		return -EFAULT;
+
+	if (!mtd->_write_oob)
+		return -EOPNOTSUPP;
+
+	ops.mode = req.mode;
+	ops.len = (size_t)req.len;
+	ops.ooblen = (size_t)req.ooblen;
+	ops.ooboffs = 0;
+
+	if (usr_data) {
+		ops.datbuf = memdup_user(usr_data, ops.len);
+		if (IS_ERR(ops.datbuf))
+			return PTR_ERR(ops.datbuf);
+	} else {
+		ops.datbuf = NULL;
+	}
+
+	if (usr_oob) {
+		ops.oobbuf = memdup_user(usr_oob, ops.ooblen);
+		if (IS_ERR(ops.oobbuf)) {
+			kfree(ops.datbuf);
+			return PTR_ERR(ops.oobbuf);
+		}
+	} else {
+		ops.oobbuf = NULL;
+	}
+
+	ret = mtd_write_oob(mtd, (loff_t)req.start, &ops);
+
+	kfree(ops.datbuf);
+	kfree(ops.oobbuf);
+
+	return ret;
+}
+
+static int mtdchar_ioctl(struct file *file, u_int cmd, u_long arg)
 {
 	struct mtd_file_info *mfi = file->private_data;
 	struct mtd_info *mtd = mfi->mtd;
@@ -472,7 +623,7 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
 	u_long size;
 	struct mtd_info_user info;
 
-	DEBUG(MTD_DEBUG_LEVEL0, "MTD_ioctl\n");
+	pr_debug("MTD_ioctl\n");
 
 	size = (cmd & IOCSIZE_MASK) >> IOCSIZE_SHIFT;
 	if (cmd & IOC_IN) {
@@ -499,6 +650,9 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
 		if (get_user(ur_idx, &(ur->regionindex)))
 			return -EFAULT;
 
+		if (ur_idx >= mtd->numeraseregions)
+			return -EINVAL;
+
 		kr = &(mtd->eraseregions[ur_idx]);
 
 		if (put_user(kr->offset, &(ur->offset))
@@ -510,15 +664,15 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
 	}
 
 	case MEMGETINFO:
+		memset(&info, 0, sizeof(info));
 		info.type	= mtd->type;
 		info.flags	= mtd->flags;
 		info.size	= mtd->size;
 		info.erasesize	= mtd->erasesize;
 		info.writesize	= mtd->writesize;
 		info.oobsize	= mtd->oobsize;
-		/* The below fields are obsolete */
-		info.ecctype	= -1;
-		info.eccsize	= 0;
+		/* The below field is obsolete */
+		info.padding	= 0;
 		if (copy_to_user(argp, &info, sizeof(struct mtd_info_user)))
 			return -EFAULT;
 		break;
@@ -574,7 +728,7 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
 			  wq_head is no longer there when the
 			  callback routine tries to wake us up.
 			*/
-			ret = mtd->erase(mtd, erase);
+			ret = mtd_erase(mtd, erase);
 			if (!ret) {
 				set_current_state(TASK_UNINTERRUPTIBLE);
 				add_wait_queue(&waitq, &wait);
@@ -600,7 +754,7 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
 		if (copy_from_user(&buf, argp, sizeof(buf)))
 			ret = -EFAULT;
 		else
-			ret = mtd_do_writeoob(file, mtd, buf.start, buf.length,
+			ret = mtdchar_writeoob(file, mtd, buf.start, buf.length,
 				buf.ptr, &buf_user->length);
 		break;
 	}
@@ -614,7 +768,7 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
 		if (copy_from_user(&buf, argp, sizeof(buf)))
 			ret = -EFAULT;
 		else
-			ret = mtd_do_readoob(mtd, buf.start, buf.length,
+			ret = mtdchar_readoob(file, mtd, buf.start, buf.length,
 				buf.ptr, &buf_user->start);
 		break;
 	}
@@ -627,7 +781,7 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
 		if (copy_from_user(&buf, argp, sizeof(buf)))
 			ret = -EFAULT;
 		else
-			ret = mtd_do_writeoob(file, mtd, buf.start, buf.length,
+			ret = mtdchar_writeoob(file, mtd, buf.start, buf.length,
 				(void __user *)(uintptr_t)buf.usr_ptr,
 				&buf_user->length);
 		break;
@@ -641,12 +795,19 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
 		if (copy_from_user(&buf, argp, sizeof(buf)))
 			ret = -EFAULT;
 		else
-			ret = mtd_do_readoob(mtd, buf.start, buf.length,
+			ret = mtdchar_readoob(file, mtd, buf.start, buf.length,
 				(void __user *)(uintptr_t)buf.usr_ptr,
 				&buf_user->length);
 		break;
 	}
 
+	case MEMWRITE:
+	{
+		ret = mtdchar_write_ioctl(mtd,
+		      (struct mtd_write_req __user *)arg);
+		break;
+	}
+
 	case MEMLOCK:
 	{
 		struct erase_info_user einfo;
@@ -654,10 +815,7 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
 		if (copy_from_user(&einfo, argp, sizeof(einfo)))
 			return -EFAULT;
 
-		if (!mtd->lock)
-			ret = -EOPNOTSUPP;
-		else
-			ret = mtd->lock(mtd, einfo.start, einfo.length);
+		ret = mtd_lock(mtd, einfo.start, einfo.length);
 		break;
 	}
 
@@ -668,10 +826,18 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
 		if (copy_from_user(&einfo, argp, sizeof(einfo)))
 			return -EFAULT;
 
-		if (!mtd->unlock)
-			ret = -EOPNOTSUPP;
-		else
-			ret = mtd->unlock(mtd, einfo.start, einfo.length);
+		ret = mtd_unlock(mtd, einfo.start, einfo.length);
+		break;
+	}
+
+	case MEMISLOCKED:
+	{
+		struct erase_info_user einfo;
+
+		if (copy_from_user(&einfo, argp, sizeof(einfo)))
+			return -EFAULT;
+
+		ret = mtd_is_locked(mtd, einfo.start, einfo.length);
 		break;
 	}
 
@@ -702,10 +868,7 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
 
 		if (copy_from_user(&offs, argp, sizeof(loff_t)))
 			return -EFAULT;
-		if (!mtd->block_isbad)
-			ret = -EOPNOTSUPP;
-		else
-			return mtd->block_isbad(mtd, offs);
+		return mtd_block_isbad(mtd, offs);
 		break;
 	}
 
@@ -715,21 +878,17 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
 
 		if (copy_from_user(&offs, argp, sizeof(loff_t)))
 			return -EFAULT;
-		if (!mtd->block_markbad)
-			ret = -EOPNOTSUPP;
-		else
-			return mtd->block_markbad(mtd, offs);
+		return mtd_block_markbad(mtd, offs);
 		break;
 	}
 
-#ifdef CONFIG_HAVE_MTD_OTP
 	case OTPSELECT:
 	{
 		int mode;
 		if (copy_from_user(&mode, argp, sizeof(int)))
 			return -EFAULT;
 
-		mfi->mode = MTD_MODE_NORMAL;
+		mfi->mode = MTD_FILE_MODE_NORMAL;
 
 		ret = otp_select_filemode(mfi, mode);
 
@@ -741,27 +900,26 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
 	case OTPGETREGIONINFO:
 	{
 		struct otp_info *buf = kmalloc(4096, GFP_KERNEL);
+		size_t retlen;
 		if (!buf)
 			return -ENOMEM;
-		ret = -EOPNOTSUPP;
 		switch (mfi->mode) {
-		case MTD_MODE_OTP_FACTORY:
-			if (mtd->get_fact_prot_info)
-				ret = mtd->get_fact_prot_info(mtd, buf, 4096);
+		case MTD_FILE_MODE_OTP_FACTORY:
+			ret = mtd_get_fact_prot_info(mtd, 4096, &retlen, buf);
 			break;
-		case MTD_MODE_OTP_USER:
-			if (mtd->get_user_prot_info)
-				ret = mtd->get_user_prot_info(mtd, buf, 4096);
+		case MTD_FILE_MODE_OTP_USER:
+			ret = mtd_get_user_prot_info(mtd, 4096, &retlen, buf);
 			break;
 		default:
+			ret = -EINVAL;
 			break;
 		}
-		if (ret >= 0) {
+		if (!ret) {
 			if (cmd == OTPGETREGIONCOUNT) {
-				int nbr = ret / sizeof(struct otp_info);
+				int nbr = retlen / sizeof(struct otp_info);
 				ret = copy_to_user(argp, &nbr, sizeof(int));
 			} else
-				ret = copy_to_user(argp, buf, ret);
+				ret = copy_to_user(argp, buf, retlen);
 			if (ret)
 				ret = -EFAULT;
 		}
@@ -773,25 +931,31 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
 	{
 		struct otp_info oinfo;
 
-		if (mfi->mode != MTD_MODE_OTP_USER)
+		if (mfi->mode != MTD_FILE_MODE_OTP_USER)
 			return -EINVAL;
 		if (copy_from_user(&oinfo, argp, sizeof(oinfo)))
 			return -EFAULT;
-		if (!mtd->lock_user_prot_reg)
-			return -EOPNOTSUPP;
-		ret = mtd->lock_user_prot_reg(mtd, oinfo.start, oinfo.length);
+		ret = mtd_lock_user_prot_reg(mtd, oinfo.start, oinfo.length);
 		break;
 	}
-#endif
 
+	/* This ioctl is being deprecated - it truncates the ECC layout */
 	case ECCGETLAYOUT:
 	{
+		struct nand_ecclayout_user *usrlay;
+
 		if (!mtd->ecclayout)
 			return -EOPNOTSUPP;
 
-		if (copy_to_user(argp, mtd->ecclayout,
-				 sizeof(struct nand_ecclayout)))
-			return -EFAULT;
+		usrlay = kmalloc(sizeof(*usrlay), GFP_KERNEL);
+		if (!usrlay)
+			return -ENOMEM;
+
+		shrink_ecclayout(mtd->ecclayout, usrlay);
+
+		if (copy_to_user(argp, usrlay, sizeof(*usrlay)))
+			ret = -EFAULT;
+		kfree(usrlay);
 		break;
 	}
 
@@ -808,17 +972,17 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
 		mfi->mode = 0;
 
 		switch(arg) {
-		case MTD_MODE_OTP_FACTORY:
-		case MTD_MODE_OTP_USER:
+		case MTD_FILE_MODE_OTP_FACTORY:
+		case MTD_FILE_MODE_OTP_USER:
 			ret = otp_select_filemode(mfi, arg);
 			break;
 
-		case MTD_MODE_RAW:
-			if (!mtd->read_oob || !mtd->write_oob)
+		case MTD_FILE_MODE_RAW:
+			if (!mtd_has_oob(mtd))
 				return -EOPNOTSUPP;
 			mfi->mode = arg;
 
-		case MTD_MODE_NORMAL:
+		case MTD_FILE_MODE_NORMAL:
 			break;
 		default:
 			ret = -EINVAL;
@@ -827,6 +991,20 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
 		break;
 	}
 
+	case BLKPG:
+	{
+		ret = mtdchar_blkpg_ioctl(mtd,
+		      (struct blkpg_ioctl_arg __user *)arg);
+		break;
+	}
+
+	case BLKRRPART:
+	{
+		/* No reread partition feature. Just return ok */
+		ret = 0;
+		break;
+	}
+
 	default:
 		ret = -ENOTTY;
 	}
@@ -834,13 +1012,13 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
 	return ret;
 } /* memory_ioctl */
 
-static long mtd_unlocked_ioctl(struct file *file, u_int cmd, u_long arg)
+static long mtdchar_unlocked_ioctl(struct file *file, u_int cmd, u_long arg)
 {
 	int ret;
 
-	lock_kernel();
-	ret = mtd_ioctl(file, cmd, arg);
-	unlock_kernel();
+	mutex_lock(&mtd_mutex);
+	ret = mtdchar_ioctl(file, cmd, arg);
+	mutex_unlock(&mtd_mutex);
 
 	return ret;
 }
@@ -856,7 +1034,7 @@ struct mtd_oob_buf32 {
 #define MEMWRITEOOB32		_IOWR('M', 3, struct mtd_oob_buf32)
 #define MEMREADOOB32		_IOWR('M', 4, struct mtd_oob_buf32)
 
-static long mtd_compat_ioctl(struct file *file, unsigned int cmd,
+static long mtdchar_compat_ioctl(struct file *file, unsigned int cmd,
 	unsigned long arg)
 {
 	struct mtd_file_info *mfi = file->private_data;
@@ -864,7 +1042,7 @@ static long mtd_compat_ioctl(struct file *file, unsigned int cmd,
 	void __user *argp = compat_ptr(arg);
 	int ret = 0;
 
-	lock_kernel();
+	mutex_lock(&mtd_mutex);
 
 	switch (cmd) {
 	case MEMWRITEOOB32:
@@ -875,7 +1053,7 @@ static long mtd_compat_ioctl(struct file *file, unsigned int cmd,
 		if (copy_from_user(&buf, argp, sizeof(buf)))
 			ret = -EFAULT;
 		else
-			ret = mtd_do_writeoob(file, mtd, buf.start,
+			ret = mtdchar_writeoob(file, mtd, buf.start,
 				buf.length, compat_ptr(buf.ptr),
 				&buf_user->length);
 		break;
@@ -890,16 +1068,16 @@ static long mtd_compat_ioctl(struct file *file, unsigned int cmd,
 		if (copy_from_user(&buf, argp, sizeof(buf)))
 			ret = -EFAULT;
 		else
-			ret = mtd_do_readoob(mtd, buf.start,
+			ret = mtdchar_readoob(file, mtd, buf.start,
 				buf.length, compat_ptr(buf.ptr),
 				&buf_user->start);
 		break;
 	}
 	default:
-		ret = mtd_ioctl(file, cmd, (unsigned long)argp);
+		ret = mtdchar_ioctl(file, cmd, (unsigned long)argp);
 	}
 
-	unlock_kernel();
+	mutex_unlock(&mtd_mutex);
 
 	return ret;
 }
@@ -912,7 +1090,7 @@ static long mtd_compat_ioctl(struct file *file, unsigned int cmd,
  *   mappings)
  */
 #ifndef CONFIG_MMU
-static unsigned long mtd_get_unmapped_area(struct file *file,
+static unsigned long mtdchar_get_unmapped_area(struct file *file,
 					   unsigned long addr,
 					   unsigned long len,
 					   unsigned long pgoff,
@@ -920,145 +1098,116 @@ static unsigned long mtd_get_unmapped_area(struct file *file,
 {
 	struct mtd_file_info *mfi = file->private_data;
 	struct mtd_info *mtd = mfi->mtd;
+	unsigned long offset;
+	int ret;
 
-	if (mtd->get_unmapped_area) {
-		unsigned long offset;
-
-		if (addr != 0)
-			return (unsigned long) -EINVAL;
-
-		if (len > mtd->size || pgoff >= (mtd->size >> PAGE_SHIFT))
-			return (unsigned long) -EINVAL;
+	if (addr != 0)
+		return (unsigned long) -EINVAL;
 
-		offset = pgoff << PAGE_SHIFT;
-		if (offset > mtd->size - len)
-			return (unsigned long) -EINVAL;
+	if (len > mtd->size || pgoff >= (mtd->size >> PAGE_SHIFT))
+		return (unsigned long) -EINVAL;
 
-		return mtd->get_unmapped_area(mtd, len, offset, flags);
-	}
+	offset = pgoff << PAGE_SHIFT;
+	if (offset > mtd->size - len)
+		return (unsigned long) -EINVAL;
 
-	/* can't map directly */
-	return (unsigned long) -ENOSYS;
+	ret = mtd_get_unmapped_area(mtd, len, offset, flags);
+	return ret == -EOPNOTSUPP ? -ENODEV : ret;
 }
 #endif
 
 /*
  * set up a mapping for shared memory segments
  */
-static int mtd_mmap(struct file *file, struct vm_area_struct *vma)
+static int mtdchar_mmap(struct file *file, struct vm_area_struct *vma)
 {
 #ifdef CONFIG_MMU
 	struct mtd_file_info *mfi = file->private_data;
 	struct mtd_info *mtd = mfi->mtd;
-
-	if (mtd->type == MTD_RAM || mtd->type == MTD_ROM)
-		return 0;
-	return -ENOSYS;
+	struct map_info *map = mtd->priv;
+
+        /* This is broken because it assumes the MTD device is map-based
+	   and that mtd->priv is a valid struct map_info.  It should be
+	   replaced with something that uses the mtd_get_unmapped_area()
+	   operation properly. */
+	if (0 /*mtd->type == MTD_RAM || mtd->type == MTD_ROM*/) {
+#ifdef pgprot_noncached
+		if (file->f_flags & O_DSYNC || map->phys >= __pa(high_memory))
+			vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+#endif
+		return vm_iomap_memory(vma, map->phys, map->size);
+	}
+	return -ENODEV;
 #else
-	return vma->vm_flags & VM_SHARED ? 0 : -ENOSYS;
+	return vma->vm_flags & VM_SHARED ? 0 : -EACCES;
 #endif
 }
 
 static const struct file_operations mtd_fops = {
 	.owner		= THIS_MODULE,
-	.llseek		= mtd_lseek,
-	.read		= mtd_read,
-	.write		= mtd_write,
-	.unlocked_ioctl	= mtd_unlocked_ioctl,
+	.llseek		= mtdchar_lseek,
+	.read		= mtdchar_read,
+	.write		= mtdchar_write,
+	.unlocked_ioctl	= mtdchar_unlocked_ioctl,
 #ifdef CONFIG_COMPAT
-	.compat_ioctl	= mtd_compat_ioctl,
+	.compat_ioctl	= mtdchar_compat_ioctl,
 #endif
-	.open		= mtd_open,
-	.release	= mtd_close,
-	.mmap		= mtd_mmap,
+	.open		= mtdchar_open,
+	.release	= mtdchar_close,
+	.mmap		= mtdchar_mmap,
 #ifndef CONFIG_MMU
-	.get_unmapped_area = mtd_get_unmapped_area,
+	.get_unmapped_area = mtdchar_get_unmapped_area,
 #endif
 };
 
-static int mtd_inodefs_get_sb(struct file_system_type *fs_type, int flags,
-                               const char *dev_name, void *data,
-                               struct vfsmount *mnt)
+static const struct super_operations mtd_ops = {
+	.drop_inode = generic_delete_inode,
+	.statfs = simple_statfs,
+};
+
+static struct dentry *mtd_inodefs_mount(struct file_system_type *fs_type,
+				int flags, const char *dev_name, void *data)
 {
-        return get_sb_pseudo(fs_type, "mtd_inode:", NULL, MTD_INODE_FS_MAGIC,
-                             mnt);
+	return mount_pseudo(fs_type, "mtd_inode:", &mtd_ops, NULL, MTD_INODE_FS_MAGIC);
 }
 
 static struct file_system_type mtd_inodefs_type = {
        .name = "mtd_inodefs",
-       .get_sb = mtd_inodefs_get_sb,
+       .mount = mtd_inodefs_mount,
        .kill_sb = kill_anon_super,
 };
+MODULE_ALIAS_FS("mtd_inodefs");
 
-static void mtdchar_notify_add(struct mtd_info *mtd)
-{
-}
-
-static void mtdchar_notify_remove(struct mtd_info *mtd)
-{
-	struct inode *mtd_ino = ilookup(mtd_inode_mnt->mnt_sb, mtd->index);
-
-	if (mtd_ino) {
-		/* Destroy the inode if it exists */
-		mtd_ino->i_nlink = 0;
-		iput(mtd_ino);
-	}
-}
-
-static struct mtd_notifier mtdchar_notifier = {
-	.add = mtdchar_notify_add,
-	.remove = mtdchar_notify_remove,
-};
-
-static int __init init_mtdchar(void)
+int __init init_mtdchar(void)
 {
 	int ret;
 
 	ret = __register_chrdev(MTD_CHAR_MAJOR, 0, 1 << MINORBITS,
 				   "mtd", &mtd_fops);
 	if (ret < 0) {
-		pr_notice("Can't allocate major number %d for "
-				"Memory Technology Devices.\n", MTD_CHAR_MAJOR);
+		pr_err("Can't allocate major number %d for MTD\n",
+		       MTD_CHAR_MAJOR);
 		return ret;
 	}
 
 	ret = register_filesystem(&mtd_inodefs_type);
 	if (ret) {
-		pr_notice("Can't register mtd_inodefs filesystem: %d\n", ret);
+		pr_err("Can't register mtd_inodefs filesystem, error %d\n",
+		       ret);
 		goto err_unregister_chdev;
 	}
 
-	mtd_inode_mnt = kern_mount(&mtd_inodefs_type);
-	if (IS_ERR(mtd_inode_mnt)) {
-		ret = PTR_ERR(mtd_inode_mnt);
-		pr_notice("Error mounting mtd_inodefs filesystem: %d\n", ret);
-		goto err_unregister_filesystem;
-	}
-	register_mtd_user(&mtdchar_notifier);
-
 	return ret;
 
-err_unregister_filesystem:
-	unregister_filesystem(&mtd_inodefs_type);
 err_unregister_chdev:
 	__unregister_chrdev(MTD_CHAR_MAJOR, 0, 1 << MINORBITS, "mtd");
 	return ret;
 }
 
-static void __exit cleanup_mtdchar(void)
+void __exit cleanup_mtdchar(void)
 {
-	unregister_mtd_user(&mtdchar_notifier);
-	mntput(mtd_inode_mnt);
 	unregister_filesystem(&mtd_inodefs_type);
 	__unregister_chrdev(MTD_CHAR_MAJOR, 0, 1 << MINORBITS, "mtd");
 }
 
-module_init(init_mtdchar);
-module_exit(cleanup_mtdchar);
-
-MODULE_ALIAS_CHARDEV_MAJOR(MTD_CHAR_MAJOR);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
-MODULE_DESCRIPTION("Direct character-device access to MTD devices");
 MODULE_ALIAS_CHARDEV_MAJOR(MTD_CHAR_MAJOR);
diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c
index 7e075621bbf..b9000563b9f 100644
--- a/drivers/mtd/mtdconcat.c
+++ b/drivers/mtd/mtdconcat.c
@@ -1,11 +1,25 @@
 /*
  * MTD device concatenation layer
  *
- * (C) 2002 Robert Kaiser <rkaiser@sysgo.de>
+ * Copyright © 2002 Robert Kaiser <rkaiser@sysgo.de>
+ * Copyright © 2002-2010 David Woodhouse <dwmw2@infradead.org>
  *
  * NAND support by Christian Gan <cgan@iders.ca>
  *
- * This code is GPL
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
  */
 
 #include <linux/kernel.h>
@@ -58,8 +72,6 @@ concat_read(struct mtd_info *mtd, loff_t from, size_t len,
 	int ret = 0, err;
 	int i;
 
-	*retlen = 0;
-
 	for (i = 0; i < concat->num_subdev; i++) {
 		struct mtd_info *subdev = concat->subdev[i];
 		size_t size, retsize;
@@ -77,14 +89,14 @@ concat_read(struct mtd_info *mtd, loff_t from, size_t len,
 			/* Entire transaction goes into this subdev */
 			size = len;
 
-		err = subdev->read(subdev, from, size, &retsize, buf);
+		err = mtd_read(subdev, from, size, &retsize, buf);
 
 		/* Save information about bitflips! */
 		if (unlikely(err)) {
-			if (err == -EBADMSG) {
+			if (mtd_is_eccerr(err)) {
 				mtd->ecc_stats.failed++;
 				ret = err;
-			} else if (err == -EUCLEAN) {
+			} else if (mtd_is_bitflip(err)) {
 				mtd->ecc_stats.corrected++;
 				/* Do not overwrite -EBADMSG !! */
 				if (!ret)
@@ -112,11 +124,6 @@ concat_write(struct mtd_info *mtd, loff_t to, size_t len,
 	int err = -EINVAL;
 	int i;
 
-	if (!(mtd->flags & MTD_WRITEABLE))
-		return -EROFS;
-
-	*retlen = 0;
-
 	for (i = 0; i < concat->num_subdev; i++) {
 		struct mtd_info *subdev = concat->subdev[i];
 		size_t size, retsize;
@@ -131,11 +138,7 @@ concat_write(struct mtd_info *mtd, loff_t to, size_t len,
 		else
 			size = len;
 
-		if (!(subdev->flags & MTD_WRITEABLE))
-			err = -EROFS;
-		else
-			err = subdev->write(subdev, to, size, &retsize, buf);
-
+		err = mtd_write(subdev, to, size, &retsize, buf);
 		if (err)
 			break;
 
@@ -162,19 +165,10 @@ concat_writev(struct mtd_info *mtd, const struct kvec *vecs,
 	int i;
 	int err = -EINVAL;
 
-	if (!(mtd->flags & MTD_WRITEABLE))
-		return -EROFS;
-
-	*retlen = 0;
-
 	/* Calculate total length of data */
 	for (i = 0; i < count; i++)
 		total_len += vecs[i].iov_len;
 
-	/* Do not allow write past end of device */
-	if ((to + total_len) > mtd->size)
-		return -EINVAL;
-
 	/* Check alignment */
 	if (mtd->writesize > 1) {
 		uint64_t __to = to;
@@ -210,11 +204,8 @@ concat_writev(struct mtd_info *mtd, const struct kvec *vecs,
 		old_iov_len = vecs_copy[entry_high].iov_len;
 		vecs_copy[entry_high].iov_len = size;
 
-		if (!(subdev->flags & MTD_WRITEABLE))
-			err = -EROFS;
-		else
-			err = subdev->writev(subdev, &vecs_copy[entry_low],
-				entry_high - entry_low + 1, to, &retsize);
+		err = mtd_writev(subdev, &vecs_copy[entry_low],
+				 entry_high - entry_low + 1, to, &retsize);
 
 		vecs_copy[entry_high].iov_len = old_iov_len - size;
 		vecs_copy[entry_high].iov_base += size;
@@ -259,16 +250,16 @@ concat_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops)
 		if (from + devops.len > subdev->size)
 			devops.len = subdev->size - from;
 
-		err = subdev->read_oob(subdev, from, &devops);
+		err = mtd_read_oob(subdev, from, &devops);
 		ops->retlen += devops.retlen;
 		ops->oobretlen += devops.oobretlen;
 
 		/* Save information about bitflips! */
 		if (unlikely(err)) {
-			if (err == -EBADMSG) {
+			if (mtd_is_eccerr(err)) {
 				mtd->ecc_stats.failed++;
 				ret = err;
-			} else if (err == -EUCLEAN) {
+			} else if (mtd_is_bitflip(err)) {
 				mtd->ecc_stats.corrected++;
 				/* Do not overwrite -EBADMSG !! */
 				if (!ret)
@@ -305,7 +296,7 @@ concat_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops)
 	if (!(mtd->flags & MTD_WRITEABLE))
 		return -EROFS;
 
-	ops->retlen = 0;
+	ops->retlen = ops->oobretlen = 0;
 
 	for (i = 0; i < concat->num_subdev; i++) {
 		struct mtd_info *subdev = concat->subdev[i];
@@ -319,8 +310,8 @@ concat_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops)
 		if (to + devops.len > subdev->size)
 			devops.len = subdev->size - to;
 
-		err = subdev->write_oob(subdev, to, &devops);
-		ops->retlen += devops.retlen;
+		err = mtd_write_oob(subdev, to, &devops);
+		ops->retlen += devops.oobretlen;
 		if (err)
 			return err;
 
@@ -365,7 +356,7 @@ static int concat_dev_erase(struct mtd_info *mtd, struct erase_info *erase)
 	 * FIXME: Allow INTERRUPTIBLE. Which means
 	 * not having the wait_queue head on the stack.
 	 */
-	err = mtd->erase(mtd, erase);
+	err = mtd_erase(mtd, erase);
 	if (!err) {
 		set_current_state(TASK_UNINTERRUPTIBLE);
 		add_wait_queue(&waitq, &wait);
@@ -388,15 +379,6 @@ static int concat_erase(struct mtd_info *mtd, struct erase_info *instr)
 	uint64_t length, offset = 0;
 	struct erase_info *erase;
 
-	if (!(mtd->flags & MTD_WRITEABLE))
-		return -EROFS;
-
-	if (instr->addr > concat->mtd.size)
-		return -EINVAL;
-
-	if (instr->len + instr->addr > concat->mtd.size)
-		return -EINVAL;
-
 	/*
 	 * Check for proper erase block alignment of the to-be-erased area.
 	 * It is easier to do this based on the super device's erase
@@ -444,8 +426,6 @@ static int concat_erase(struct mtd_info *mtd, struct erase_info *instr)
 			return -EINVAL;
 	}
 
-	instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
-
 	/* make a local copy of instr to avoid modifying the caller's struct */
 	erase = kmalloc(sizeof (struct erase_info), GFP_KERNEL);
 
@@ -484,10 +464,6 @@ static int concat_erase(struct mtd_info *mtd, struct erase_info *instr)
 		else
 			erase->len = length;
 
-		if (!(subdev->flags & MTD_WRITEABLE)) {
-			err = -EROFS;
-			break;
-		}
 		length -= erase->len;
 		if ((err = concat_dev_erase(subdev, erase))) {
 			/* sanity check: should never happen since
@@ -523,9 +499,6 @@ static int concat_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 	struct mtd_concat *concat = CONCAT(mtd);
 	int i, err = -EINVAL;
 
-	if ((len + ofs) > mtd->size)
-		return -EINVAL;
-
 	for (i = 0; i < concat->num_subdev; i++) {
 		struct mtd_info *subdev = concat->subdev[i];
 		uint64_t size;
@@ -540,8 +513,7 @@ static int concat_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 		else
 			size = len;
 
-		err = subdev->lock(subdev, ofs, size);
-
+		err = mtd_lock(subdev, ofs, size);
 		if (err)
 			break;
 
@@ -561,9 +533,6 @@ static int concat_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 	struct mtd_concat *concat = CONCAT(mtd);
 	int i, err = 0;
 
-	if ((len + ofs) > mtd->size)
-		return -EINVAL;
-
 	for (i = 0; i < concat->num_subdev; i++) {
 		struct mtd_info *subdev = concat->subdev[i];
 		uint64_t size;
@@ -578,8 +547,7 @@ static int concat_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 		else
 			size = len;
 
-		err = subdev->unlock(subdev, ofs, size);
-
+		err = mtd_unlock(subdev, ofs, size);
 		if (err)
 			break;
 
@@ -601,7 +569,7 @@ static void concat_sync(struct mtd_info *mtd)
 
 	for (i = 0; i < concat->num_subdev; i++) {
 		struct mtd_info *subdev = concat->subdev[i];
-		subdev->sync(subdev);
+		mtd_sync(subdev);
 	}
 }
 
@@ -612,7 +580,7 @@ static int concat_suspend(struct mtd_info *mtd)
 
 	for (i = 0; i < concat->num_subdev; i++) {
 		struct mtd_info *subdev = concat->subdev[i];
-		if ((rc = subdev->suspend(subdev)) < 0)
+		if ((rc = mtd_suspend(subdev)) < 0)
 			return rc;
 	}
 	return rc;
@@ -625,7 +593,7 @@ static void concat_resume(struct mtd_info *mtd)
 
 	for (i = 0; i < concat->num_subdev; i++) {
 		struct mtd_info *subdev = concat->subdev[i];
-		subdev->resume(subdev);
+		mtd_resume(subdev);
 	}
 }
 
@@ -634,12 +602,9 @@ static int concat_block_isbad(struct mtd_info *mtd, loff_t ofs)
 	struct mtd_concat *concat = CONCAT(mtd);
 	int i, res = 0;
 
-	if (!concat->subdev[0]->block_isbad)
+	if (!mtd_can_have_bb(concat->subdev[0]))
 		return res;
 
-	if (ofs > mtd->size)
-		return -EINVAL;
-
 	for (i = 0; i < concat->num_subdev; i++) {
 		struct mtd_info *subdev = concat->subdev[i];
 
@@ -648,7 +613,7 @@ static int concat_block_isbad(struct mtd_info *mtd, loff_t ofs)
 			continue;
 		}
 
-		res = subdev->block_isbad(subdev, ofs);
+		res = mtd_block_isbad(subdev, ofs);
 		break;
 	}
 
@@ -660,12 +625,6 @@ static int concat_block_markbad(struct mtd_info *mtd, loff_t ofs)
 	struct mtd_concat *concat = CONCAT(mtd);
 	int i, err = -EINVAL;
 
-	if (!concat->subdev[0]->block_markbad)
-		return 0;
-
-	if (ofs > mtd->size)
-		return -EINVAL;
-
 	for (i = 0; i < concat->num_subdev; i++) {
 		struct mtd_info *subdev = concat->subdev[i];
 
@@ -674,7 +633,7 @@ static int concat_block_markbad(struct mtd_info *mtd, loff_t ofs)
 			continue;
 		}
 
-		err = subdev->block_markbad(subdev, ofs);
+		err = mtd_block_markbad(subdev, ofs);
 		if (!err)
 			mtd->ecc_stats.badblocks++;
 		break;
@@ -703,15 +662,7 @@ static unsigned long concat_get_unmapped_area(struct mtd_info *mtd,
 			continue;
 		}
 
-		/* we've found the subdev over which the mapping will reside */
-		if (offset + len > subdev->size)
-			return (unsigned long) -EINVAL;
-
-		if (subdev->get_unmapped_area)
-			return subdev->get_unmapped_area(subdev, len, offset,
-							 flags);
-
-		break;
+		return mtd_get_unmapped_area(subdev, len, offset, flags);
 	}
 
 	return (unsigned long) -ENOSYS;
@@ -732,6 +683,7 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[],	/* subdevices to c
 	struct mtd_concat *concat;
 	uint32_t max_erasesize, curr_erasesize;
 	int num_erase_region;
+	int max_writebufsize = 0;
 
 	printk(KERN_NOTICE "Concatenating MTD devices:\n");
 	for (i = 0; i < num_devs; i++)
@@ -751,26 +703,32 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[],	/* subdevices to c
 
 	/*
 	 * Set up the new "super" device's MTD object structure, check for
-	 * incompatibilites between the subdevices.
+	 * incompatibilities between the subdevices.
 	 */
 	concat->mtd.type = subdev[0]->type;
 	concat->mtd.flags = subdev[0]->flags;
 	concat->mtd.size = subdev[0]->size;
 	concat->mtd.erasesize = subdev[0]->erasesize;
 	concat->mtd.writesize = subdev[0]->writesize;
+
+	for (i = 0; i < num_devs; i++)
+		if (max_writebufsize < subdev[i]->writebufsize)
+			max_writebufsize = subdev[i]->writebufsize;
+	concat->mtd.writebufsize = max_writebufsize;
+
 	concat->mtd.subpage_sft = subdev[0]->subpage_sft;
 	concat->mtd.oobsize = subdev[0]->oobsize;
 	concat->mtd.oobavail = subdev[0]->oobavail;
-	if (subdev[0]->writev)
-		concat->mtd.writev = concat_writev;
-	if (subdev[0]->read_oob)
-		concat->mtd.read_oob = concat_read_oob;
-	if (subdev[0]->write_oob)
-		concat->mtd.write_oob = concat_write_oob;
-	if (subdev[0]->block_isbad)
-		concat->mtd.block_isbad = concat_block_isbad;
-	if (subdev[0]->block_markbad)
-		concat->mtd.block_markbad = concat_block_markbad;
+	if (subdev[0]->_writev)
+		concat->mtd._writev = concat_writev;
+	if (subdev[0]->_read_oob)
+		concat->mtd._read_oob = concat_read_oob;
+	if (subdev[0]->_write_oob)
+		concat->mtd._write_oob = concat_write_oob;
+	if (subdev[0]->_block_isbad)
+		concat->mtd._block_isbad = concat_block_isbad;
+	if (subdev[0]->_block_markbad)
+		concat->mtd._block_markbad = concat_block_markbad;
 
 	concat->mtd.ecc_stats.badblocks = subdev[0]->ecc_stats.badblocks;
 
@@ -817,8 +775,8 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[],	/* subdevices to c
 		if (concat->mtd.writesize   !=  subdev[i]->writesize ||
 		    concat->mtd.subpage_sft != subdev[i]->subpage_sft ||
 		    concat->mtd.oobsize    !=  subdev[i]->oobsize ||
-		    !concat->mtd.read_oob  != !subdev[i]->read_oob ||
-		    !concat->mtd.write_oob != !subdev[i]->write_oob) {
+		    !concat->mtd._read_oob  != !subdev[i]->_read_oob ||
+		    !concat->mtd._write_oob != !subdev[i]->_write_oob) {
 			kfree(concat);
 			printk("Incompatible OOB or ECC data on \"%s\"\n",
 			       subdev[i]->name);
@@ -833,15 +791,15 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[],	/* subdevices to c
 	concat->num_subdev = num_devs;
 	concat->mtd.name = name;
 
-	concat->mtd.erase = concat_erase;
-	concat->mtd.read = concat_read;
-	concat->mtd.write = concat_write;
-	concat->mtd.sync = concat_sync;
-	concat->mtd.lock = concat_lock;
-	concat->mtd.unlock = concat_unlock;
-	concat->mtd.suspend = concat_suspend;
-	concat->mtd.resume = concat_resume;
-	concat->mtd.get_unmapped_area = concat_get_unmapped_area;
+	concat->mtd._erase = concat_erase;
+	concat->mtd._read = concat_read;
+	concat->mtd._write = concat_write;
+	concat->mtd._sync = concat_sync;
+	concat->mtd._lock = concat_lock;
+	concat->mtd._unlock = concat_unlock;
+	concat->mtd._suspend = concat_suspend;
+	concat->mtd._resume = concat_resume;
+	concat->mtd._get_unmapped_area = concat_get_unmapped_area;
 
 	/*
 	 * Combine the erase block size info of the subdevices:
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index a1b8b70d2d0..d201feeb3ca 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -2,14 +2,29 @@
  * Core registration and callback routines for MTD
  * drivers and users.
  *
- * bdi bits are:
- * Copyright © 2006 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ * Copyright © 2006      Red Hat UK Limited 
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
  */
 
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/ptrace.h>
+#include <linux/seq_file.h>
 #include <linux/string.h>
 #include <linux/timer.h>
 #include <linux/major.h>
@@ -17,20 +32,22 @@
 #include <linux/err.h>
 #include <linux/ioctl.h>
 #include <linux/init.h>
-#include <linux/mtd/compatmac.h>
 #include <linux/proc_fs.h>
 #include <linux/idr.h>
 #include <linux/backing-dev.h>
 #include <linux/gfp.h>
+#include <linux/slab.h>
 
 #include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
 
 #include "mtdcore.h"
+
 /*
  * backing device capabilities for non-mappable devices (such as NAND flash)
  * - permits private mappings, copies are taken of the data
  */
-struct backing_dev_info mtd_bdi_unmappable = {
+static struct backing_dev_info mtd_bdi_unmappable = {
 	.capabilities	= BDI_CAP_MAP_COPY,
 };
 
@@ -39,7 +56,7 @@ struct backing_dev_info mtd_bdi_unmappable = {
  * - permits private mappings, copies are taken of the data
  * - permits non-writable shared mappings
  */
-struct backing_dev_info mtd_bdi_ro_mappable = {
+static struct backing_dev_info mtd_bdi_ro_mappable = {
 	.capabilities	= (BDI_CAP_MAP_COPY | BDI_CAP_MAP_DIRECT |
 			   BDI_CAP_EXEC_MAP | BDI_CAP_READ_MAP),
 };
@@ -49,7 +66,7 @@ struct backing_dev_info mtd_bdi_ro_mappable = {
  * - permits private mappings, copies are taken of the data
  * - permits non-writable shared mappings
  */
-struct backing_dev_info mtd_bdi_rw_mappable = {
+static struct backing_dev_info mtd_bdi_rw_mappable = {
 	.capabilities	= (BDI_CAP_MAP_COPY | BDI_CAP_MAP_DIRECT |
 			   BDI_CAP_EXEC_MAP | BDI_CAP_READ_MAP |
 			   BDI_CAP_WRITE_MAP),
@@ -81,18 +98,15 @@ EXPORT_SYMBOL_GPL(__mtd_next_device);
 static LIST_HEAD(mtd_notifiers);
 
 
-#if defined(CONFIG_MTD_CHAR) || defined(CONFIG_MTD_CHAR_MODULE)
 #define MTD_DEVT(index) MKDEV(MTD_CHAR_MAJOR, (index)*2)
-#else
-#define MTD_DEVT(index) 0
-#endif
 
 /* REVISIT once MTD uses the driver model better, whoever allocates
  * the mtd_info will probably want to use the release() hook...
  */
 static void mtd_release(struct device *dev)
 {
-	dev_t index = MTD_DEVT(dev_to_mtd(dev)->index);
+	struct mtd_info __maybe_unused *mtd = dev_get_drvdata(dev);
+	dev_t index = MTD_DEVT(mtd->index);
 
 	/* remove /dev/mtdXro node if needed */
 	if (index)
@@ -101,27 +115,24 @@ static void mtd_release(struct device *dev)
 
 static int mtd_cls_suspend(struct device *dev, pm_message_t state)
 {
-	struct mtd_info *mtd = dev_to_mtd(dev);
+	struct mtd_info *mtd = dev_get_drvdata(dev);
 
-	if (mtd && mtd->suspend)
-		return mtd->suspend(mtd);
-	else
-		return 0;
+	return mtd ? mtd_suspend(mtd) : 0;
 }
 
 static int mtd_cls_resume(struct device *dev)
 {
-	struct mtd_info *mtd = dev_to_mtd(dev);
-	
-	if (mtd && mtd->resume)
-		mtd->resume(mtd);
+	struct mtd_info *mtd = dev_get_drvdata(dev);
+
+	if (mtd)
+		mtd_resume(mtd);
 	return 0;
 }
 
 static ssize_t mtd_type_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
-	struct mtd_info *mtd = dev_to_mtd(dev);
+	struct mtd_info *mtd = dev_get_drvdata(dev);
 	char *type;
 
 	switch (mtd->type) {
@@ -146,6 +157,9 @@ static ssize_t mtd_type_show(struct device *dev,
 	case MTD_UBIVOLUME:
 		type = "ubi";
 		break;
+	case MTD_MLCNANDFLASH:
+		type = "mlc-nand";
+		break;
 	default:
 		type = "unknown";
 	}
@@ -157,7 +171,7 @@ static DEVICE_ATTR(type, S_IRUGO, mtd_type_show, NULL);
 static ssize_t mtd_flags_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
-	struct mtd_info *mtd = dev_to_mtd(dev);
+	struct mtd_info *mtd = dev_get_drvdata(dev);
 
 	return snprintf(buf, PAGE_SIZE, "0x%lx\n", (unsigned long)mtd->flags);
 
@@ -167,7 +181,7 @@ static DEVICE_ATTR(flags, S_IRUGO, mtd_flags_show, NULL);
 static ssize_t mtd_size_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
-	struct mtd_info *mtd = dev_to_mtd(dev);
+	struct mtd_info *mtd = dev_get_drvdata(dev);
 
 	return snprintf(buf, PAGE_SIZE, "%llu\n",
 		(unsigned long long)mtd->size);
@@ -178,7 +192,7 @@ static DEVICE_ATTR(size, S_IRUGO, mtd_size_show, NULL);
 static ssize_t mtd_erasesize_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
-	struct mtd_info *mtd = dev_to_mtd(dev);
+	struct mtd_info *mtd = dev_get_drvdata(dev);
 
 	return snprintf(buf, PAGE_SIZE, "%lu\n", (unsigned long)mtd->erasesize);
 
@@ -188,7 +202,7 @@ static DEVICE_ATTR(erasesize, S_IRUGO, mtd_erasesize_show, NULL);
 static ssize_t mtd_writesize_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
-	struct mtd_info *mtd = dev_to_mtd(dev);
+	struct mtd_info *mtd = dev_get_drvdata(dev);
 
 	return snprintf(buf, PAGE_SIZE, "%lu\n", (unsigned long)mtd->writesize);
 
@@ -198,7 +212,7 @@ static DEVICE_ATTR(writesize, S_IRUGO, mtd_writesize_show, NULL);
 static ssize_t mtd_subpagesize_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
-	struct mtd_info *mtd = dev_to_mtd(dev);
+	struct mtd_info *mtd = dev_get_drvdata(dev);
 	unsigned int subpagesize = mtd->writesize >> mtd->subpage_sft;
 
 	return snprintf(buf, PAGE_SIZE, "%u\n", subpagesize);
@@ -209,7 +223,7 @@ static DEVICE_ATTR(subpagesize, S_IRUGO, mtd_subpagesize_show, NULL);
 static ssize_t mtd_oobsize_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
-	struct mtd_info *mtd = dev_to_mtd(dev);
+	struct mtd_info *mtd = dev_get_drvdata(dev);
 
 	return snprintf(buf, PAGE_SIZE, "%lu\n", (unsigned long)mtd->oobsize);
 
@@ -219,7 +233,7 @@ static DEVICE_ATTR(oobsize, S_IRUGO, mtd_oobsize_show, NULL);
 static ssize_t mtd_numeraseregions_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
-	struct mtd_info *mtd = dev_to_mtd(dev);
+	struct mtd_info *mtd = dev_get_drvdata(dev);
 
 	return snprintf(buf, PAGE_SIZE, "%u\n", mtd->numeraseregions);
 
@@ -230,13 +244,60 @@ static DEVICE_ATTR(numeraseregions, S_IRUGO, mtd_numeraseregions_show,
 static ssize_t mtd_name_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
-	struct mtd_info *mtd = dev_to_mtd(dev);
+	struct mtd_info *mtd = dev_get_drvdata(dev);
 
 	return snprintf(buf, PAGE_SIZE, "%s\n", mtd->name);
 
 }
 static DEVICE_ATTR(name, S_IRUGO, mtd_name_show, NULL);
 
+static ssize_t mtd_ecc_strength_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct mtd_info *mtd = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%u\n", mtd->ecc_strength);
+}
+static DEVICE_ATTR(ecc_strength, S_IRUGO, mtd_ecc_strength_show, NULL);
+
+static ssize_t mtd_bitflip_threshold_show(struct device *dev,
+					  struct device_attribute *attr,
+					  char *buf)
+{
+	struct mtd_info *mtd = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%u\n", mtd->bitflip_threshold);
+}
+
+static ssize_t mtd_bitflip_threshold_store(struct device *dev,
+					   struct device_attribute *attr,
+					   const char *buf, size_t count)
+{
+	struct mtd_info *mtd = dev_get_drvdata(dev);
+	unsigned int bitflip_threshold;
+	int retval;
+
+	retval = kstrtouint(buf, 0, &bitflip_threshold);
+	if (retval)
+		return retval;
+
+	mtd->bitflip_threshold = bitflip_threshold;
+	return count;
+}
+static DEVICE_ATTR(bitflip_threshold, S_IRUGO | S_IWUSR,
+		   mtd_bitflip_threshold_show,
+		   mtd_bitflip_threshold_store);
+
+static ssize_t mtd_ecc_step_size_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct mtd_info *mtd = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%u\n", mtd->ecc_step_size);
+
+}
+static DEVICE_ATTR(ecc_step_size, S_IRUGO, mtd_ecc_step_size_show, NULL);
+
 static struct attribute *mtd_attrs[] = {
 	&dev_attr_type.attr,
 	&dev_attr_flags.attr,
@@ -247,17 +308,12 @@ static struct attribute *mtd_attrs[] = {
 	&dev_attr_oobsize.attr,
 	&dev_attr_numeraseregions.attr,
 	&dev_attr_name.attr,
+	&dev_attr_ecc_strength.attr,
+	&dev_attr_ecc_step_size.attr,
+	&dev_attr_bitflip_threshold.attr,
 	NULL,
 };
-
-static struct attribute_group mtd_group = {
-	.attrs		= mtd_attrs,
-};
-
-static const struct attribute_group *mtd_groups[] = {
-	&mtd_group,
-	NULL,
-};
+ATTRIBUTE_GROUPS(mtd);
 
 static struct device_type mtd_devtype = {
 	.name		= "mtd",
@@ -297,18 +353,17 @@ int add_mtd_device(struct mtd_info *mtd)
 	BUG_ON(mtd->writesize == 0);
 	mutex_lock(&mtd_table_mutex);
 
-	do {
-		if (!idr_pre_get(&mtd_idr, GFP_KERNEL))
-			goto fail_locked;
-		error = idr_get_new(&mtd_idr, mtd, &i);
-	} while (error == -EAGAIN);
-
-	if (error)
+	i = idr_alloc(&mtd_idr, mtd, 0, 0, GFP_KERNEL);
+	if (i < 0)
 		goto fail_locked;
 
 	mtd->index = i;
 	mtd->usecount = 0;
 
+	/* default value if not set by driver */
+	if (mtd->bitflip_threshold == 0)
+		mtd->bitflip_threshold = mtd->ecc_strength;
+
 	if (is_power_of_2(mtd->erasesize))
 		mtd->erasesize_shift = ffs(mtd->erasesize) - 1;
 	else
@@ -323,9 +378,9 @@ int add_mtd_device(struct mtd_info *mtd)
 	mtd->writesize_mask = (1 << mtd->writesize_shift) - 1;
 
 	/* Some chips always power up locked. Unlock them now */
-	if ((mtd->flags & MTD_WRITEABLE)
-	    && (mtd->flags & MTD_POWERUP_LOCK) && mtd->unlock) {
-		if (mtd->unlock(mtd, 0, mtd->size))
+	if ((mtd->flags & MTD_WRITEABLE) && (mtd->flags & MTD_POWERUP_LOCK)) {
+		error = mtd_unlock(mtd, 0, mtd->size);
+		if (error && error != -EOPNOTSUPP)
 			printk(KERN_WARNING
 			       "%s: unlock failed, writes may not work\n",
 			       mtd->name);
@@ -347,7 +402,7 @@ int add_mtd_device(struct mtd_info *mtd)
 			      MTD_DEVT(i) + 1,
 			      NULL, "mtd%dro", i);
 
-	DEBUG(0, "mtd: Giving out device %d to %s\n", i, mtd->name);
+	pr_debug("mtd: Giving out device %d to %s\n", i, mtd->name);
 	/* No need to get a refcount on the module containing
 	   the notifier, since we hold the mtd_table_mutex */
 	list_for_each_entry(not, &mtd_notifiers, list)
@@ -378,7 +433,7 @@ fail_locked:
  *	if the requested device does not appear to be present in the list.
  */
 
-int del_mtd_device (struct mtd_info *mtd)
+int del_mtd_device(struct mtd_info *mtd)
 {
 	int ret;
 	struct mtd_notifier *not;
@@ -414,6 +469,86 @@ out_error:
 }
 
 /**
+ * mtd_device_parse_register - parse partitions and register an MTD device.
+ *
+ * @mtd: the MTD device to register
+ * @types: the list of MTD partition probes to try, see
+ *         'parse_mtd_partitions()' for more information
+ * @parser_data: MTD partition parser-specific data
+ * @parts: fallback partition information to register, if parsing fails;
+ *         only valid if %nr_parts > %0
+ * @nr_parts: the number of partitions in parts, if zero then the full
+ *            MTD device is registered if no partition info is found
+ *
+ * This function aggregates MTD partitions parsing (done by
+ * 'parse_mtd_partitions()') and MTD device and partitions registering. It
+ * basically follows the most common pattern found in many MTD drivers:
+ *
+ * * It first tries to probe partitions on MTD device @mtd using parsers
+ *   specified in @types (if @types is %NULL, then the default list of parsers
+ *   is used, see 'parse_mtd_partitions()' for more information). If none are
+ *   found this functions tries to fallback to information specified in
+ *   @parts/@nr_parts.
+ * * If any partitioning info was found, this function registers the found
+ *   partitions.
+ * * If no partitions were found this function just registers the MTD device
+ *   @mtd and exits.
+ *
+ * Returns zero in case of success and a negative error code in case of failure.
+ */
+int mtd_device_parse_register(struct mtd_info *mtd, const char * const *types,
+			      struct mtd_part_parser_data *parser_data,
+			      const struct mtd_partition *parts,
+			      int nr_parts)
+{
+	int err;
+	struct mtd_partition *real_parts;
+
+	err = parse_mtd_partitions(mtd, types, &real_parts, parser_data);
+	if (err <= 0 && nr_parts && parts) {
+		real_parts = kmemdup(parts, sizeof(*parts) * nr_parts,
+				     GFP_KERNEL);
+		if (!real_parts)
+			err = -ENOMEM;
+		else
+			err = nr_parts;
+	}
+
+	if (err > 0) {
+		err = add_mtd_partitions(mtd, real_parts, err);
+		kfree(real_parts);
+	} else if (err == 0) {
+		err = add_mtd_device(mtd);
+		if (err == 1)
+			err = -ENODEV;
+	}
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(mtd_device_parse_register);
+
+/**
+ * mtd_device_unregister - unregister an existing MTD device.
+ *
+ * @master: the MTD device to unregister.  This will unregister both the master
+ *          and any partitions if registered.
+ */
+int mtd_device_unregister(struct mtd_info *master)
+{
+	int err;
+
+	err = del_mtd_partitions(master);
+	if (err)
+		return err;
+
+	if (!device_is_registered(&master->dev))
+		return 0;
+
+	return del_mtd_device(master);
+}
+EXPORT_SYMBOL_GPL(mtd_device_unregister);
+
+/**
  *	register_mtd_user - register a 'user' of MTD devices.
  *	@new: pointer to notifier info structure
  *
@@ -421,7 +556,6 @@ out_error:
  *	or removal of MTD devices. Causes the 'add' callback to be immediately
  *	invoked for each MTD device currently present in the system.
  */
-
 void register_mtd_user (struct mtd_notifier *new)
 {
 	struct mtd_info *mtd;
@@ -430,13 +564,14 @@ void register_mtd_user (struct mtd_notifier *new)
 
 	list_add(&new->list, &mtd_notifiers);
 
- 	__module_get(THIS_MODULE);
+	__module_get(THIS_MODULE);
 
 	mtd_for_each_device(mtd)
 		new->add(mtd);
 
 	mutex_unlock(&mtd_table_mutex);
 }
+EXPORT_SYMBOL_GPL(register_mtd_user);
 
 /**
  *	unregister_mtd_user - unregister a 'user' of MTD devices.
@@ -447,7 +582,6 @@ void register_mtd_user (struct mtd_notifier *new)
  *	'remove' callback to be immediately invoked for each MTD device
  *	currently present in the system.
  */
-
 int unregister_mtd_user (struct mtd_notifier *old)
 {
 	struct mtd_info *mtd;
@@ -463,7 +597,7 @@ int unregister_mtd_user (struct mtd_notifier *old)
 	mutex_unlock(&mtd_table_mutex);
 	return 0;
 }
-
+EXPORT_SYMBOL_GPL(unregister_mtd_user);
 
 /**
  *	get_mtd_device - obtain a validated handle for an MTD device
@@ -476,7 +610,6 @@ int unregister_mtd_user (struct mtd_notifier *old)
  *	both, return the num'th driver only if its address matches. Return
  *	error code if not.
  */
-
 struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num)
 {
 	struct mtd_info *ret = NULL, *other;
@@ -509,6 +642,7 @@ out:
 	mutex_unlock(&mtd_table_mutex);
 	return ret;
 }
+EXPORT_SYMBOL_GPL(get_mtd_device);
 
 
 int __get_mtd_device(struct mtd_info *mtd)
@@ -518,9 +652,8 @@ int __get_mtd_device(struct mtd_info *mtd)
 	if (!try_module_get(mtd->owner))
 		return -ENODEV;
 
-	if (mtd->get_device) {
-
-		err = mtd->get_device(mtd);
+	if (mtd->_get_device) {
+		err = mtd->_get_device(mtd);
 
 		if (err) {
 			module_put(mtd->owner);
@@ -530,6 +663,7 @@ int __get_mtd_device(struct mtd_info *mtd)
 	mtd->usecount++;
 	return 0;
 }
+EXPORT_SYMBOL_GPL(__get_mtd_device);
 
 /**
  *	get_mtd_device_nm - obtain a validated handle for an MTD device by
@@ -539,7 +673,6 @@ int __get_mtd_device(struct mtd_info *mtd)
  * 	This function returns MTD device description structure in case of
  * 	success and an error code in case of failure.
  */
-
 struct mtd_info *get_mtd_device_nm(const char *name)
 {
 	int err = -ENODEV;
@@ -557,25 +690,18 @@ struct mtd_info *get_mtd_device_nm(const char *name)
 	if (!mtd)
 		goto out_unlock;
 
-	if (!try_module_get(mtd->owner))
+	err = __get_mtd_device(mtd);
+	if (err)
 		goto out_unlock;
 
-	if (mtd->get_device) {
-		err = mtd->get_device(mtd);
-		if (err)
-			goto out_put;
-	}
-
-	mtd->usecount++;
 	mutex_unlock(&mtd_table_mutex);
 	return mtd;
 
-out_put:
-	module_put(mtd->owner);
 out_unlock:
 	mutex_unlock(&mtd_table_mutex);
 	return ERR_PTR(err);
 }
+EXPORT_SYMBOL_GPL(get_mtd_device_nm);
 
 void put_mtd_device(struct mtd_info *mtd)
 {
@@ -584,103 +710,452 @@ void put_mtd_device(struct mtd_info *mtd)
 	mutex_unlock(&mtd_table_mutex);
 
 }
+EXPORT_SYMBOL_GPL(put_mtd_device);
 
 void __put_mtd_device(struct mtd_info *mtd)
 {
 	--mtd->usecount;
 	BUG_ON(mtd->usecount < 0);
 
-	if (mtd->put_device)
-		mtd->put_device(mtd);
+	if (mtd->_put_device)
+		mtd->_put_device(mtd);
 
 	module_put(mtd->owner);
 }
+EXPORT_SYMBOL_GPL(__put_mtd_device);
+
+/*
+ * Erase is an asynchronous operation.  Device drivers are supposed
+ * to call instr->callback() whenever the operation completes, even
+ * if it completes with a failure.
+ * Callers are supposed to pass a callback function and wait for it
+ * to be called before writing to the block.
+ */
+int mtd_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+	if (instr->addr > mtd->size || instr->len > mtd->size - instr->addr)
+		return -EINVAL;
+	if (!(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+	instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
+	if (!instr->len) {
+		instr->state = MTD_ERASE_DONE;
+		mtd_erase_callback(instr);
+		return 0;
+	}
+	return mtd->_erase(mtd, instr);
+}
+EXPORT_SYMBOL_GPL(mtd_erase);
+
+/*
+ * This stuff for eXecute-In-Place. phys is optional and may be set to NULL.
+ */
+int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
+	      void **virt, resource_size_t *phys)
+{
+	*retlen = 0;
+	*virt = NULL;
+	if (phys)
+		*phys = 0;
+	if (!mtd->_point)
+		return -EOPNOTSUPP;
+	if (from < 0 || from > mtd->size || len > mtd->size - from)
+		return -EINVAL;
+	if (!len)
+		return 0;
+	return mtd->_point(mtd, from, len, retlen, virt, phys);
+}
+EXPORT_SYMBOL_GPL(mtd_point);
+
+/* We probably shouldn't allow XIP if the unpoint isn't a NULL */
+int mtd_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
+{
+	if (!mtd->_point)
+		return -EOPNOTSUPP;
+	if (from < 0 || from > mtd->size || len > mtd->size - from)
+		return -EINVAL;
+	if (!len)
+		return 0;
+	return mtd->_unpoint(mtd, from, len);
+}
+EXPORT_SYMBOL_GPL(mtd_unpoint);
+
+/*
+ * Allow NOMMU mmap() to directly map the device (if not NULL)
+ * - return the address to which the offset maps
+ * - return -ENOSYS to indicate refusal to do the mapping
+ */
+unsigned long mtd_get_unmapped_area(struct mtd_info *mtd, unsigned long len,
+				    unsigned long offset, unsigned long flags)
+{
+	if (!mtd->_get_unmapped_area)
+		return -EOPNOTSUPP;
+	if (offset > mtd->size || len > mtd->size - offset)
+		return -EINVAL;
+	return mtd->_get_unmapped_area(mtd, len, offset, flags);
+}
+EXPORT_SYMBOL_GPL(mtd_get_unmapped_area);
+
+int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
+	     u_char *buf)
+{
+	int ret_code;
+	*retlen = 0;
+	if (from < 0 || from > mtd->size || len > mtd->size - from)
+		return -EINVAL;
+	if (!len)
+		return 0;
+
+	/*
+	 * In the absence of an error, drivers return a non-negative integer
+	 * representing the maximum number of bitflips that were corrected on
+	 * any one ecc region (if applicable; zero otherwise).
+	 */
+	ret_code = mtd->_read(mtd, from, len, retlen, buf);
+	if (unlikely(ret_code < 0))
+		return ret_code;
+	if (mtd->ecc_strength == 0)
+		return 0;	/* device lacks ecc */
+	return ret_code >= mtd->bitflip_threshold ? -EUCLEAN : 0;
+}
+EXPORT_SYMBOL_GPL(mtd_read);
+
+int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
+	      const u_char *buf)
+{
+	*retlen = 0;
+	if (to < 0 || to > mtd->size || len > mtd->size - to)
+		return -EINVAL;
+	if (!mtd->_write || !(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+	if (!len)
+		return 0;
+	return mtd->_write(mtd, to, len, retlen, buf);
+}
+EXPORT_SYMBOL_GPL(mtd_write);
 
-/* default_mtd_writev - default mtd writev method for MTD devices that
- *			don't implement their own
+/*
+ * In blackbox flight recorder like scenarios we want to make successful writes
+ * in interrupt context. panic_write() is only intended to be called when its
+ * known the kernel is about to panic and we need the write to succeed. Since
+ * the kernel is not going to be running for much longer, this function can
+ * break locks and delay to ensure the write succeeds (but not sleep).
  */
+int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
+		    const u_char *buf)
+{
+	*retlen = 0;
+	if (!mtd->_panic_write)
+		return -EOPNOTSUPP;
+	if (to < 0 || to > mtd->size || len > mtd->size - to)
+		return -EINVAL;
+	if (!(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+	if (!len)
+		return 0;
+	return mtd->_panic_write(mtd, to, len, retlen, buf);
+}
+EXPORT_SYMBOL_GPL(mtd_panic_write);
 
-int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
-		       unsigned long count, loff_t to, size_t *retlen)
+int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops)
+{
+	int ret_code;
+	ops->retlen = ops->oobretlen = 0;
+	if (!mtd->_read_oob)
+		return -EOPNOTSUPP;
+	/*
+	 * In cases where ops->datbuf != NULL, mtd->_read_oob() has semantics
+	 * similar to mtd->_read(), returning a non-negative integer
+	 * representing max bitflips. In other cases, mtd->_read_oob() may
+	 * return -EUCLEAN. In all cases, perform similar logic to mtd_read().
+	 */
+	ret_code = mtd->_read_oob(mtd, from, ops);
+	if (unlikely(ret_code < 0))
+		return ret_code;
+	if (mtd->ecc_strength == 0)
+		return 0;	/* device lacks ecc */
+	return ret_code >= mtd->bitflip_threshold ? -EUCLEAN : 0;
+}
+EXPORT_SYMBOL_GPL(mtd_read_oob);
+
+/*
+ * Method to access the protection register area, present in some flash
+ * devices. The user data is one time programmable but the factory data is read
+ * only.
+ */
+int mtd_get_fact_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen,
+			   struct otp_info *buf)
+{
+	if (!mtd->_get_fact_prot_info)
+		return -EOPNOTSUPP;
+	if (!len)
+		return 0;
+	return mtd->_get_fact_prot_info(mtd, len, retlen, buf);
+}
+EXPORT_SYMBOL_GPL(mtd_get_fact_prot_info);
+
+int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
+			   size_t *retlen, u_char *buf)
+{
+	*retlen = 0;
+	if (!mtd->_read_fact_prot_reg)
+		return -EOPNOTSUPP;
+	if (!len)
+		return 0;
+	return mtd->_read_fact_prot_reg(mtd, from, len, retlen, buf);
+}
+EXPORT_SYMBOL_GPL(mtd_read_fact_prot_reg);
+
+int mtd_get_user_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen,
+			   struct otp_info *buf)
+{
+	if (!mtd->_get_user_prot_info)
+		return -EOPNOTSUPP;
+	if (!len)
+		return 0;
+	return mtd->_get_user_prot_info(mtd, len, retlen, buf);
+}
+EXPORT_SYMBOL_GPL(mtd_get_user_prot_info);
+
+int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
+			   size_t *retlen, u_char *buf)
+{
+	*retlen = 0;
+	if (!mtd->_read_user_prot_reg)
+		return -EOPNOTSUPP;
+	if (!len)
+		return 0;
+	return mtd->_read_user_prot_reg(mtd, from, len, retlen, buf);
+}
+EXPORT_SYMBOL_GPL(mtd_read_user_prot_reg);
+
+int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len,
+			    size_t *retlen, u_char *buf)
+{
+	int ret;
+
+	*retlen = 0;
+	if (!mtd->_write_user_prot_reg)
+		return -EOPNOTSUPP;
+	if (!len)
+		return 0;
+	ret = mtd->_write_user_prot_reg(mtd, to, len, retlen, buf);
+	if (ret)
+		return ret;
+
+	/*
+	 * If no data could be written at all, we are out of memory and
+	 * must return -ENOSPC.
+	 */
+	return (*retlen) ? 0 : -ENOSPC;
+}
+EXPORT_SYMBOL_GPL(mtd_write_user_prot_reg);
+
+int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len)
+{
+	if (!mtd->_lock_user_prot_reg)
+		return -EOPNOTSUPP;
+	if (!len)
+		return 0;
+	return mtd->_lock_user_prot_reg(mtd, from, len);
+}
+EXPORT_SYMBOL_GPL(mtd_lock_user_prot_reg);
+
+/* Chip-supported device locking */
+int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+	if (!mtd->_lock)
+		return -EOPNOTSUPP;
+	if (ofs < 0 || ofs > mtd->size || len > mtd->size - ofs)
+		return -EINVAL;
+	if (!len)
+		return 0;
+	return mtd->_lock(mtd, ofs, len);
+}
+EXPORT_SYMBOL_GPL(mtd_lock);
+
+int mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+	if (!mtd->_unlock)
+		return -EOPNOTSUPP;
+	if (ofs < 0 || ofs > mtd->size || len > mtd->size - ofs)
+		return -EINVAL;
+	if (!len)
+		return 0;
+	return mtd->_unlock(mtd, ofs, len);
+}
+EXPORT_SYMBOL_GPL(mtd_unlock);
+
+int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+	if (!mtd->_is_locked)
+		return -EOPNOTSUPP;
+	if (ofs < 0 || ofs > mtd->size || len > mtd->size - ofs)
+		return -EINVAL;
+	if (!len)
+		return 0;
+	return mtd->_is_locked(mtd, ofs, len);
+}
+EXPORT_SYMBOL_GPL(mtd_is_locked);
+
+int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs)
+{
+	if (!mtd->_block_isbad)
+		return 0;
+	if (ofs < 0 || ofs > mtd->size)
+		return -EINVAL;
+	return mtd->_block_isbad(mtd, ofs);
+}
+EXPORT_SYMBOL_GPL(mtd_block_isbad);
+
+int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+	if (!mtd->_block_markbad)
+		return -EOPNOTSUPP;
+	if (ofs < 0 || ofs > mtd->size)
+		return -EINVAL;
+	if (!(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+	return mtd->_block_markbad(mtd, ofs);
+}
+EXPORT_SYMBOL_GPL(mtd_block_markbad);
+
+/*
+ * default_mtd_writev - the default writev method
+ * @mtd: mtd device description object pointer
+ * @vecs: the vectors to write
+ * @count: count of vectors in @vecs
+ * @to: the MTD device offset to write to
+ * @retlen: on exit contains the count of bytes written to the MTD device.
+ *
+ * This function returns zero in case of success and a negative error code in
+ * case of failure.
+ */
+static int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
+			      unsigned long count, loff_t to, size_t *retlen)
 {
 	unsigned long i;
 	size_t totlen = 0, thislen;
 	int ret = 0;
 
-	if(!mtd->write) {
-		ret = -EROFS;
-	} else {
-		for (i=0; i<count; i++) {
-			if (!vecs[i].iov_len)
-				continue;
-			ret = mtd->write(mtd, to, vecs[i].iov_len, &thislen, vecs[i].iov_base);
-			totlen += thislen;
-			if (ret || thislen != vecs[i].iov_len)
-				break;
-			to += vecs[i].iov_len;
-		}
+	for (i = 0; i < count; i++) {
+		if (!vecs[i].iov_len)
+			continue;
+		ret = mtd_write(mtd, to, vecs[i].iov_len, &thislen,
+				vecs[i].iov_base);
+		totlen += thislen;
+		if (ret || thislen != vecs[i].iov_len)
+			break;
+		to += vecs[i].iov_len;
 	}
-	if (retlen)
-		*retlen = totlen;
+	*retlen = totlen;
 	return ret;
 }
 
-EXPORT_SYMBOL_GPL(add_mtd_device);
-EXPORT_SYMBOL_GPL(del_mtd_device);
-EXPORT_SYMBOL_GPL(get_mtd_device);
-EXPORT_SYMBOL_GPL(get_mtd_device_nm);
-EXPORT_SYMBOL_GPL(__get_mtd_device);
-EXPORT_SYMBOL_GPL(put_mtd_device);
-EXPORT_SYMBOL_GPL(__put_mtd_device);
-EXPORT_SYMBOL_GPL(register_mtd_user);
-EXPORT_SYMBOL_GPL(unregister_mtd_user);
-EXPORT_SYMBOL_GPL(default_mtd_writev);
+/*
+ * mtd_writev - the vector-based MTD write method
+ * @mtd: mtd device description object pointer
+ * @vecs: the vectors to write
+ * @count: count of vectors in @vecs
+ * @to: the MTD device offset to write to
+ * @retlen: on exit contains the count of bytes written to the MTD device.
+ *
+ * This function returns zero in case of success and a negative error code in
+ * case of failure.
+ */
+int mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
+	       unsigned long count, loff_t to, size_t *retlen)
+{
+	*retlen = 0;
+	if (!(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+	if (!mtd->_writev)
+		return default_mtd_writev(mtd, vecs, count, to, retlen);
+	return mtd->_writev(mtd, vecs, count, to, retlen);
+}
+EXPORT_SYMBOL_GPL(mtd_writev);
 
-#ifdef CONFIG_PROC_FS
+/**
+ * mtd_kmalloc_up_to - allocate a contiguous buffer up to the specified size
+ * @mtd: mtd device description object pointer
+ * @size: a pointer to the ideal or maximum size of the allocation, points
+ *        to the actual allocation size on success.
+ *
+ * This routine attempts to allocate a contiguous kernel buffer up to
+ * the specified size, backing off the size of the request exponentially
+ * until the request succeeds or until the allocation size falls below
+ * the system page size. This attempts to make sure it does not adversely
+ * impact system performance, so when allocating more than one page, we
+ * ask the memory allocator to avoid re-trying, swapping, writing back
+ * or performing I/O.
+ *
+ * Note, this function also makes sure that the allocated buffer is aligned to
+ * the MTD device's min. I/O unit, i.e. the "mtd->writesize" value.
+ *
+ * This is called, for example by mtd_{read,write} and jffs2_scan_medium,
+ * to handle smaller (i.e. degraded) buffer allocations under low- or
+ * fragmented-memory situations where such reduced allocations, from a
+ * requested ideal, are allowed.
+ *
+ * Returns a pointer to the allocated buffer on success; otherwise, NULL.
+ */
+void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size)
+{
+	gfp_t flags = __GFP_NOWARN | __GFP_WAIT |
+		       __GFP_NORETRY | __GFP_NO_KSWAPD;
+	size_t min_alloc = max_t(size_t, mtd->writesize, PAGE_SIZE);
+	void *kbuf;
 
-/*====================================================================*/
-/* Support for /proc/mtd */
+	*size = min_t(size_t, *size, KMALLOC_MAX_SIZE);
 
-static struct proc_dir_entry *proc_mtd;
+	while (*size > min_alloc) {
+		kbuf = kmalloc(*size, flags);
+		if (kbuf)
+			return kbuf;
 
-static inline int mtd_proc_info(char *buf, struct mtd_info *this)
-{
-	return sprintf(buf, "mtd%d: %8.8llx %8.8x \"%s\"\n", this->index,
-		       (unsigned long long)this->size,
-		       this->erasesize, this->name);
+		*size >>= 1;
+		*size = ALIGN(*size, mtd->writesize);
+	}
+
+	/*
+	 * For the last resort allocation allow 'kmalloc()' to do all sorts of
+	 * things (write-back, dropping caches, etc) by using GFP_KERNEL.
+	 */
+	return kmalloc(*size, GFP_KERNEL);
 }
+EXPORT_SYMBOL_GPL(mtd_kmalloc_up_to);
 
-static int mtd_read_proc (char *page, char **start, off_t off, int count,
-			  int *eof, void *data_unused)
+#ifdef CONFIG_PROC_FS
+
+/*====================================================================*/
+/* Support for /proc/mtd */
+
+static int mtd_proc_show(struct seq_file *m, void *v)
 {
 	struct mtd_info *mtd;
-	int len, l;
-        off_t   begin = 0;
 
+	seq_puts(m, "dev:    size   erasesize  name\n");
 	mutex_lock(&mtd_table_mutex);
-
-	len = sprintf(page, "dev:    size   erasesize  name\n");
 	mtd_for_each_device(mtd) {
-		l = mtd_proc_info(page + len, mtd);
-                len += l;
-                if (len+begin > off+count)
-                        goto done;
-                if (len+begin < off) {
-                        begin += len;
-                        len = 0;
-                }
-        }
-
-        *eof = 1;
-
-done:
+		seq_printf(m, "mtd%d: %8.8llx %8.8x \"%s\"\n",
+			   mtd->index, (unsigned long long)mtd->size,
+			   mtd->erasesize, mtd->name);
+	}
 	mutex_unlock(&mtd_table_mutex);
-        if (off >= len+begin)
-                return 0;
-        *start = page + (off-begin);
-        return ((count < begin+len-off) ? count : begin+len-off);
+	return 0;
+}
+
+static int mtd_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, mtd_proc_show, NULL);
 }
 
+static const struct file_operations mtd_proc_ops = {
+	.open		= mtd_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
 #endif /* CONFIG_PROC_FS */
 
 /*====================================================================*/
@@ -692,7 +1167,7 @@ static int __init mtd_bdi_init(struct backing_dev_info *bdi, const char *name)
 
 	ret = bdi_init(bdi);
 	if (!ret)
-		ret = bdi_register(bdi, NULL, name);
+		ret = bdi_register(bdi, NULL, "%s", name);
 
 	if (ret)
 		bdi_destroy(bdi);
@@ -700,6 +1175,8 @@ static int __init mtd_bdi_init(struct backing_dev_info *bdi, const char *name)
 	return ret;
 }
 
+static struct proc_dir_entry *proc_mtd;
+
 static int __init init_mtd(void)
 {
 	int ret;
@@ -720,12 +1197,17 @@ static int __init init_mtd(void)
 	if (ret)
 		goto err_bdi3;
 
-#ifdef CONFIG_PROC_FS
-	if ((proc_mtd = create_proc_entry( "mtd", 0, NULL )))
-		proc_mtd->read_proc = mtd_read_proc;
-#endif /* CONFIG_PROC_FS */
+	proc_mtd = proc_create("mtd", 0, NULL, &mtd_proc_ops);
+
+	ret = init_mtdchar();
+	if (ret)
+		goto out_procfs;
+
 	return 0;
 
+out_procfs:
+	if (proc_mtd)
+		remove_proc_entry("mtd", NULL);
 err_bdi3:
 	bdi_destroy(&mtd_bdi_ro_mappable);
 err_bdi2:
@@ -739,10 +1221,9 @@ err_reg:
 
 static void __exit cleanup_mtd(void)
 {
-#ifdef CONFIG_PROC_FS
-        if (proc_mtd)
-		remove_proc_entry( "mtd", NULL);
-#endif /* CONFIG_PROC_FS */
+	cleanup_mtdchar();
+	if (proc_mtd)
+		remove_proc_entry("mtd", NULL);
 	class_unregister(&mtd_class);
 	bdi_destroy(&mtd_bdi_unmappable);
 	bdi_destroy(&mtd_bdi_ro_mappable);
diff --git a/drivers/mtd/mtdcore.h b/drivers/mtd/mtdcore.h
index 6a64fdebc89..7b0353399a1 100644
--- a/drivers/mtd/mtdcore.h
+++ b/drivers/mtd/mtdcore.h
@@ -1,14 +1,21 @@
-/* linux/drivers/mtd/mtdcore.h
- *
- * Header file for driver private mtdcore exports
- *
+/*
+ * These are exported solely for the purpose of mtd_blkdevs.c and mtdchar.c.
+ * You should not use them for _anything_ else.
  */
 
-/* These are exported solely for the purpose of mtd_blkdevs.c. You
-   should not use them for _anything_ else */
-
 extern struct mutex mtd_table_mutex;
-extern struct mtd_info *__mtd_next_device(int i);
+
+struct mtd_info *__mtd_next_device(int i);
+int add_mtd_device(struct mtd_info *mtd);
+int del_mtd_device(struct mtd_info *mtd);
+int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
+int del_mtd_partitions(struct mtd_info *);
+int parse_mtd_partitions(struct mtd_info *master, const char * const *types,
+			 struct mtd_partition **pparts,
+			 struct mtd_part_parser_data *data);
+
+int __init init_mtdchar(void);
+void __exit cleanup_mtdchar(void);
 
 #define mtd_for_each_device(mtd)			\
 	for ((mtd) = __mtd_next_device(0);		\
diff --git a/drivers/mtd/mtdoops.c b/drivers/mtd/mtdoops.c
index 328313c3dcc..97bb8f6304d 100644
--- a/drivers/mtd/mtdoops.c
+++ b/drivers/mtd/mtdoops.c
@@ -1,7 +1,7 @@
 /*
  * MTD Oops/Panic logger
  *
- * Copyright (C) 2007 Nokia Corporation. All rights reserved.
+ * Copyright © 2007 Nokia Corporation. All rights reserved.
  *
  * Author: Richard Purdie <rpurdie@openedhand.com>
  *
@@ -112,7 +112,7 @@ static int mtdoops_erase_block(struct mtdoops_context *cxt, int offset)
 	set_current_state(TASK_INTERRUPTIBLE);
 	add_wait_queue(&wait_q, &wait);
 
-	ret = mtd->erase(mtd, &erase);
+	ret = mtd_erase(mtd, &erase);
 	if (ret) {
 		set_current_state(TASK_RUNNING);
 		remove_wait_queue(&wait_q, &wait);
@@ -169,14 +169,7 @@ static void mtdoops_workfunc_erase(struct work_struct *work)
 			cxt->nextpage = 0;
 	}
 
-	while (mtd->block_isbad) {
-		ret = mtd->block_isbad(mtd, cxt->nextpage * record_size);
-		if (!ret)
-			break;
-		if (ret < 0) {
-			printk(KERN_ERR "mtdoops: block_isbad failed, aborting\n");
-			return;
-		}
+	while ((ret = mtd_block_isbad(mtd, cxt->nextpage * record_size)) > 0) {
 badblock:
 		printk(KERN_WARNING "mtdoops: bad block at %08lx\n",
 		       cxt->nextpage * record_size);
@@ -190,6 +183,11 @@ badblock:
 		}
 	}
 
+	if (ret < 0) {
+		printk(KERN_ERR "mtdoops: mtd_block_isbad failed, aborting\n");
+		return;
+	}
+
 	for (j = 0, ret = -1; (j < 3) && (ret < 0); j++)
 		ret = mtdoops_erase_block(cxt, cxt->nextpage * record_size);
 
@@ -199,9 +197,9 @@ badblock:
 		return;
 	}
 
-	if (mtd->block_markbad && ret == -EIO) {
-		ret = mtd->block_markbad(mtd, cxt->nextpage * record_size);
-		if (ret < 0) {
+	if (ret == -EIO) {
+		ret = mtd_block_markbad(mtd, cxt->nextpage * record_size);
+		if (ret < 0 && ret != -EOPNOTSUPP) {
 			printk(KERN_ERR "mtdoops: block_markbad failed, aborting\n");
 			return;
 		}
@@ -221,12 +219,16 @@ static void mtdoops_write(struct mtdoops_context *cxt, int panic)
 	hdr[0] = cxt->nextcount;
 	hdr[1] = MTDOOPS_KERNMSG_MAGIC;
 
-	if (panic)
-		ret = mtd->panic_write(mtd, cxt->nextpage * record_size,
-					record_size, &retlen, cxt->oops_buf);
-	else
-		ret = mtd->write(mtd, cxt->nextpage * record_size,
-					record_size, &retlen, cxt->oops_buf);
+	if (panic) {
+		ret = mtd_panic_write(mtd, cxt->nextpage * record_size,
+				      record_size, &retlen, cxt->oops_buf);
+		if (ret == -EOPNOTSUPP) {
+			printk(KERN_ERR "mtdoops: Cannot write from panic without panic_write\n");
+			return;
+		}
+	} else
+		ret = mtd_write(mtd, cxt->nextpage * record_size,
+				record_size, &retlen, cxt->oops_buf);
 
 	if (retlen != record_size || ret < 0)
 		printk(KERN_ERR "mtdoops: write failure at %ld (%td of %ld written), error %d\n",
@@ -253,12 +255,14 @@ static void find_next_position(struct mtdoops_context *cxt)
 	size_t retlen;
 
 	for (page = 0; page < cxt->oops_pages; page++) {
+		if (mtd_block_isbad(mtd, page * record_size))
+			continue;
 		/* Assume the page is used */
 		mark_page_used(cxt, page);
-		ret = mtd->read(mtd, page * record_size, MTDOOPS_HEADER_SIZE,
-				&retlen, (u_char *) &count[0]);
+		ret = mtd_read(mtd, page * record_size, MTDOOPS_HEADER_SIZE,
+			       &retlen, (u_char *)&count[0]);
 		if (retlen != MTDOOPS_HEADER_SIZE ||
-				(ret < 0 && ret != -EUCLEAN)) {
+				(ret < 0 && !mtd_is_bitflip(ret))) {
 			printk(KERN_ERR "mtdoops: read failure at %ld (%td of %d read), err %d\n",
 			       page * record_size, retlen,
 			       MTDOOPS_HEADER_SIZE, ret);
@@ -267,7 +271,7 @@ static void find_next_position(struct mtdoops_context *cxt)
 
 		if (count[0] == 0xffffffff && count[1] == 0xffffffff)
 			mark_page_unused(cxt, page);
-		if (count[0] == 0xffffffff)
+		if (count[0] == 0xffffffff || count[1] != MTDOOPS_KERNMSG_MAGIC)
 			continue;
 		if (maxcount == 0xffffffff) {
 			maxcount = count[0];
@@ -285,50 +289,33 @@ static void find_next_position(struct mtdoops_context *cxt)
 		}
 	}
 	if (maxcount == 0xffffffff) {
-		cxt->nextpage = 0;
-		cxt->nextcount = 1;
-		schedule_work(&cxt->work_erase);
-		return;
+		cxt->nextpage = cxt->oops_pages - 1;
+		cxt->nextcount = 0;
+	}
+	else {
+		cxt->nextpage = maxpos;
+		cxt->nextcount = maxcount;
 	}
-
-	cxt->nextpage = maxpos;
-	cxt->nextcount = maxcount;
 
 	mtdoops_inc_counter(cxt);
 }
 
 static void mtdoops_do_dump(struct kmsg_dumper *dumper,
-		enum kmsg_dump_reason reason, const char *s1, unsigned long l1,
-		const char *s2, unsigned long l2)
+			    enum kmsg_dump_reason reason)
 {
 	struct mtdoops_context *cxt = container_of(dumper,
 			struct mtdoops_context, dump);
-	unsigned long s1_start, s2_start;
-	unsigned long l1_cpy, l2_cpy;
-	char *dst;
 
 	/* Only dump oopses if dump_oops is set */
 	if (reason == KMSG_DUMP_OOPS && !dump_oops)
 		return;
 
-	dst = cxt->oops_buf + MTDOOPS_HEADER_SIZE; /* Skip the header */
-	l2_cpy = min(l2, record_size - MTDOOPS_HEADER_SIZE);
-	l1_cpy = min(l1, record_size - MTDOOPS_HEADER_SIZE - l2_cpy);
-
-	s2_start = l2 - l2_cpy;
-	s1_start = l1 - l1_cpy;
-
-	memcpy(dst, s1 + s1_start, l1_cpy);
-	memcpy(dst + l1_cpy, s2 + s2_start, l2_cpy);
+	kmsg_dump_get_buffer(dumper, true, cxt->oops_buf + MTDOOPS_HEADER_SIZE,
+			     record_size - MTDOOPS_HEADER_SIZE, NULL);
 
 	/* Panics must be written immediately */
-	if (reason != KMSG_DUMP_OOPS) {
-		if (!cxt->mtd->panic_write)
-			printk(KERN_ERR "mtdoops: Cannot write from panic without panic_write\n");
-		else
-			mtdoops_write(cxt, 1);
-		return;
-	}
+	if (reason != KMSG_DUMP_OOPS)
+		mtdoops_write(cxt, 1);
 
 	/* For other cases, schedule work to write it "nicely" */
 	schedule_work(&cxt->work_write);
@@ -364,12 +351,13 @@ static void mtdoops_notify_add(struct mtd_info *mtd)
 
 	/* oops_page_used is a bit field */
 	cxt->oops_page_used = vmalloc(DIV_ROUND_UP(mtdoops_pages,
-			BITS_PER_LONG));
+			BITS_PER_LONG) * sizeof(unsigned long));
 	if (!cxt->oops_page_used) {
 		printk(KERN_ERR "mtdoops: could not allocate page array\n");
 		return;
 	}
 
+	cxt->dump.max_reason = KMSG_DUMP_OOPS;
 	cxt->dump.dump = mtdoops_do_dump;
 	err = kmsg_dump_register(&cxt->dump);
 	if (err) {
@@ -396,7 +384,8 @@ static void mtdoops_notify_remove(struct mtd_info *mtd)
 		printk(KERN_WARNING "mtdoops: could not unregister kmsg_dumper\n");
 
 	cxt->mtd = NULL;
-	flush_scheduled_work();
+	flush_work(&cxt->work_erase);
+	flush_work(&cxt->work_write);
 }
 
 
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index b8043a9ba32..1ca9aec141f 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -1,12 +1,24 @@
 /*
  * Simple MTD partitioning layer
  *
- * (C) 2000 Nicolas Pitre <nico@fluxnic.net>
+ * Copyright © 2000 Nicolas Pitre <nico@fluxnic.net>
+ * Copyright © 2002 Thomas Gleixner <gleixner@linutronix.de>
+ * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org>
  *
- * This code is GPL
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  *
- * 	02-21-2002	Thomas Gleixner <gleixner@autronix.de>
- *			added support for read_oob, write_oob
  */
 
 #include <linux/module.h>
@@ -17,10 +29,13 @@
 #include <linux/kmod.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/mtd/compatmac.h>
+#include <linux/err.h>
+
+#include "mtdcore.h"
 
 /* Our partition linked list */
 static LIST_HEAD(mtd_partitions);
+static DEFINE_MUTEX(mtd_partitions_mutex);
 
 /* Our partition node structure */
 struct mtd_part {
@@ -50,19 +65,14 @@ static int part_read(struct mtd_info *mtd, loff_t from, size_t len,
 	int res;
 
 	stats = part->master->ecc_stats;
-
-	if (from >= mtd->size)
-		len = 0;
-	else if (from + len > mtd->size)
-		len = mtd->size - from;
-	res = part->master->read(part->master, from + part->offset,
-				   len, retlen, buf);
-	if (unlikely(res)) {
-		if (res == -EUCLEAN)
-			mtd->ecc_stats.corrected += part->master->ecc_stats.corrected - stats.corrected;
-		if (res == -EBADMSG)
-			mtd->ecc_stats.failed += part->master->ecc_stats.failed - stats.failed;
-	}
+	res = part->master->_read(part->master, from + part->offset, len,
+				  retlen, buf);
+	if (unlikely(mtd_is_eccerr(res)))
+		mtd->ecc_stats.failed +=
+			part->master->ecc_stats.failed - stats.failed;
+	else
+		mtd->ecc_stats.corrected +=
+			part->master->ecc_stats.corrected - stats.corrected;
 	return res;
 }
 
@@ -70,19 +80,16 @@ static int part_point(struct mtd_info *mtd, loff_t from, size_t len,
 		size_t *retlen, void **virt, resource_size_t *phys)
 {
 	struct mtd_part *part = PART(mtd);
-	if (from >= mtd->size)
-		len = 0;
-	else if (from + len > mtd->size)
-		len = mtd->size - from;
-	return part->master->point (part->master, from + part->offset,
-				    len, retlen, virt, phys);
+
+	return part->master->_point(part->master, from + part->offset, len,
+				    retlen, virt, phys);
 }
 
-static void part_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
+static int part_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 {
 	struct mtd_part *part = PART(mtd);
 
-	part->master->unpoint(part->master, from + part->offset, len);
+	return part->master->_unpoint(part->master, from + part->offset, len);
 }
 
 static unsigned long part_get_unmapped_area(struct mtd_info *mtd,
@@ -93,8 +100,8 @@ static unsigned long part_get_unmapped_area(struct mtd_info *mtd,
 	struct mtd_part *part = PART(mtd);
 
 	offset += part->offset;
-	return part->master->get_unmapped_area(part->master, len, offset,
-					       flags);
+	return part->master->_get_unmapped_area(part->master, len, offset,
+						flags);
 }
 
 static int part_read_oob(struct mtd_info *mtd, loff_t from,
@@ -107,12 +114,29 @@ static int part_read_oob(struct mtd_info *mtd, loff_t from,
 		return -EINVAL;
 	if (ops->datbuf && from + ops->len > mtd->size)
 		return -EINVAL;
-	res = part->master->read_oob(part->master, from + part->offset, ops);
 
+	/*
+	 * If OOB is also requested, make sure that we do not read past the end
+	 * of this partition.
+	 */
+	if (ops->oobbuf) {
+		size_t len, pages;
+
+		if (ops->mode == MTD_OPS_AUTO_OOB)
+			len = mtd->oobavail;
+		else
+			len = mtd->oobsize;
+		pages = mtd_div_by_ws(mtd->size, mtd);
+		pages -= mtd_div_by_ws(from, mtd);
+		if (ops->ooboffs + ops->ooblen > pages * len)
+			return -EINVAL;
+	}
+
+	res = part->master->_read_oob(part->master, from + part->offset, ops);
 	if (unlikely(res)) {
-		if (res == -EUCLEAN)
+		if (mtd_is_bitflip(res))
 			mtd->ecc_stats.corrected++;
-		if (res == -EBADMSG)
+		if (mtd_is_eccerr(res))
 			mtd->ecc_stats.failed++;
 	}
 	return res;
@@ -122,58 +146,48 @@ static int part_read_user_prot_reg(struct mtd_info *mtd, loff_t from,
 		size_t len, size_t *retlen, u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
-	return part->master->read_user_prot_reg(part->master, from,
-					len, retlen, buf);
+	return part->master->_read_user_prot_reg(part->master, from, len,
+						 retlen, buf);
 }
 
-static int part_get_user_prot_info(struct mtd_info *mtd,
-		struct otp_info *buf, size_t len)
+static int part_get_user_prot_info(struct mtd_info *mtd, size_t len,
+				   size_t *retlen, struct otp_info *buf)
 {
 	struct mtd_part *part = PART(mtd);
-	return part->master->get_user_prot_info(part->master, buf, len);
+	return part->master->_get_user_prot_info(part->master, len, retlen,
+						 buf);
 }
 
 static int part_read_fact_prot_reg(struct mtd_info *mtd, loff_t from,
 		size_t len, size_t *retlen, u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
-	return part->master->read_fact_prot_reg(part->master, from,
-					len, retlen, buf);
+	return part->master->_read_fact_prot_reg(part->master, from, len,
+						 retlen, buf);
 }
 
-static int part_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf,
-		size_t len)
+static int part_get_fact_prot_info(struct mtd_info *mtd, size_t len,
+				   size_t *retlen, struct otp_info *buf)
 {
 	struct mtd_part *part = PART(mtd);
-	return part->master->get_fact_prot_info(part->master, buf, len);
+	return part->master->_get_fact_prot_info(part->master, len, retlen,
+						 buf);
 }
 
 static int part_write(struct mtd_info *mtd, loff_t to, size_t len,
 		size_t *retlen, const u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
-	if (!(mtd->flags & MTD_WRITEABLE))
-		return -EROFS;
-	if (to >= mtd->size)
-		len = 0;
-	else if (to + len > mtd->size)
-		len = mtd->size - to;
-	return part->master->write(part->master, to + part->offset,
-				    len, retlen, buf);
+	return part->master->_write(part->master, to + part->offset, len,
+				    retlen, buf);
 }
 
 static int part_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
 		size_t *retlen, const u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
-	if (!(mtd->flags & MTD_WRITEABLE))
-		return -EROFS;
-	if (to >= mtd->size)
-		len = 0;
-	else if (to + len > mtd->size)
-		len = mtd->size - to;
-	return part->master->panic_write(part->master, to + part->offset,
-				    len, retlen, buf);
+	return part->master->_panic_write(part->master, to + part->offset, len,
+					  retlen, buf);
 }
 
 static int part_write_oob(struct mtd_info *mtd, loff_t to,
@@ -181,51 +195,43 @@ static int part_write_oob(struct mtd_info *mtd, loff_t to,
 {
 	struct mtd_part *part = PART(mtd);
 
-	if (!(mtd->flags & MTD_WRITEABLE))
-		return -EROFS;
-
 	if (to >= mtd->size)
 		return -EINVAL;
 	if (ops->datbuf && to + ops->len > mtd->size)
 		return -EINVAL;
-	return part->master->write_oob(part->master, to + part->offset, ops);
+	return part->master->_write_oob(part->master, to + part->offset, ops);
 }
 
 static int part_write_user_prot_reg(struct mtd_info *mtd, loff_t from,
 		size_t len, size_t *retlen, u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
-	return part->master->write_user_prot_reg(part->master, from,
-					len, retlen, buf);
+	return part->master->_write_user_prot_reg(part->master, from, len,
+						  retlen, buf);
 }
 
 static int part_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,
 		size_t len)
 {
 	struct mtd_part *part = PART(mtd);
-	return part->master->lock_user_prot_reg(part->master, from, len);
+	return part->master->_lock_user_prot_reg(part->master, from, len);
 }
 
 static int part_writev(struct mtd_info *mtd, const struct kvec *vecs,
 		unsigned long count, loff_t to, size_t *retlen)
 {
 	struct mtd_part *part = PART(mtd);
-	if (!(mtd->flags & MTD_WRITEABLE))
-		return -EROFS;
-	return part->master->writev(part->master, vecs, count,
-					to + part->offset, retlen);
+	return part->master->_writev(part->master, vecs, count,
+				     to + part->offset, retlen);
 }
 
 static int part_erase(struct mtd_info *mtd, struct erase_info *instr)
 {
 	struct mtd_part *part = PART(mtd);
 	int ret;
-	if (!(mtd->flags & MTD_WRITEABLE))
-		return -EROFS;
-	if (instr->addr >= mtd->size)
-		return -EINVAL;
+
 	instr->addr += part->offset;
-	ret = part->master->erase(part->master, instr);
+	ret = part->master->_erase(part->master, instr);
 	if (ret) {
 		if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
 			instr->fail_addr -= part->offset;
@@ -236,7 +242,7 @@ static int part_erase(struct mtd_info *mtd, struct erase_info *instr)
 
 void mtd_erase_callback(struct erase_info *instr)
 {
-	if (instr->mtd->erase == part_erase) {
+	if (instr->mtd->_erase == part_erase) {
 		struct mtd_part *part = PART(instr->mtd);
 
 		if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
@@ -251,44 +257,44 @@ EXPORT_SYMBOL_GPL(mtd_erase_callback);
 static int part_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 {
 	struct mtd_part *part = PART(mtd);
-	if ((len + ofs) > mtd->size)
-		return -EINVAL;
-	return part->master->lock(part->master, ofs + part->offset, len);
+	return part->master->_lock(part->master, ofs + part->offset, len);
 }
 
 static int part_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 {
 	struct mtd_part *part = PART(mtd);
-	if ((len + ofs) > mtd->size)
-		return -EINVAL;
-	return part->master->unlock(part->master, ofs + part->offset, len);
+	return part->master->_unlock(part->master, ofs + part->offset, len);
+}
+
+static int part_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+	struct mtd_part *part = PART(mtd);
+	return part->master->_is_locked(part->master, ofs + part->offset, len);
 }
 
 static void part_sync(struct mtd_info *mtd)
 {
 	struct mtd_part *part = PART(mtd);
-	part->master->sync(part->master);
+	part->master->_sync(part->master);
 }
 
 static int part_suspend(struct mtd_info *mtd)
 {
 	struct mtd_part *part = PART(mtd);
-	return part->master->suspend(part->master);
+	return part->master->_suspend(part->master);
 }
 
 static void part_resume(struct mtd_info *mtd)
 {
 	struct mtd_part *part = PART(mtd);
-	part->master->resume(part->master);
+	part->master->_resume(part->master);
 }
 
 static int part_block_isbad(struct mtd_info *mtd, loff_t ofs)
 {
 	struct mtd_part *part = PART(mtd);
-	if (ofs >= mtd->size)
-		return -EINVAL;
 	ofs += part->offset;
-	return part->master->block_isbad(part->master, ofs);
+	return part->master->_block_isbad(part->master, ofs);
 }
 
 static int part_block_markbad(struct mtd_info *mtd, loff_t ofs)
@@ -296,17 +302,19 @@ static int part_block_markbad(struct mtd_info *mtd, loff_t ofs)
 	struct mtd_part *part = PART(mtd);
 	int res;
 
-	if (!(mtd->flags & MTD_WRITEABLE))
-		return -EROFS;
-	if (ofs >= mtd->size)
-		return -EINVAL;
 	ofs += part->offset;
-	res = part->master->block_markbad(part->master, ofs);
+	res = part->master->_block_markbad(part->master, ofs);
 	if (!res)
 		mtd->ecc_stats.badblocks++;
 	return res;
 }
 
+static inline void free_partition(struct mtd_part *p)
+{
+	kfree(p->mtd.name);
+	kfree(p);
+}
+
 /*
  * This function unregisters and destroy all slave MTD objects which are
  * attached to the given master MTD object.
@@ -315,44 +323,53 @@ static int part_block_markbad(struct mtd_info *mtd, loff_t ofs)
 int del_mtd_partitions(struct mtd_info *master)
 {
 	struct mtd_part *slave, *next;
+	int ret, err = 0;
 
+	mutex_lock(&mtd_partitions_mutex);
 	list_for_each_entry_safe(slave, next, &mtd_partitions, list)
 		if (slave->master == master) {
+			ret = del_mtd_device(&slave->mtd);
+			if (ret < 0) {
+				err = ret;
+				continue;
+			}
 			list_del(&slave->list);
-			del_mtd_device(&slave->mtd);
-			kfree(slave);
+			free_partition(slave);
 		}
+	mutex_unlock(&mtd_partitions_mutex);
 
-	return 0;
+	return err;
 }
-EXPORT_SYMBOL(del_mtd_partitions);
 
-static struct mtd_part *add_one_partition(struct mtd_info *master,
-		const struct mtd_partition *part, int partno,
-		uint64_t cur_offset)
+static struct mtd_part *allocate_partition(struct mtd_info *master,
+			const struct mtd_partition *part, int partno,
+			uint64_t cur_offset)
 {
 	struct mtd_part *slave;
+	char *name;
 
 	/* allocate the partition structure */
 	slave = kzalloc(sizeof(*slave), GFP_KERNEL);
-	if (!slave) {
+	name = kstrdup(part->name, GFP_KERNEL);
+	if (!name || !slave) {
 		printk(KERN_ERR"memory allocation error while creating partitions for \"%s\"\n",
-			master->name);
-		del_mtd_partitions(master);
-		return NULL;
+		       master->name);
+		kfree(name);
+		kfree(slave);
+		return ERR_PTR(-ENOMEM);
 	}
-	list_add(&slave->list, &mtd_partitions);
 
 	/* set up the MTD object for this partition */
 	slave->mtd.type = master->type;
 	slave->mtd.flags = master->flags & ~part->mask_flags;
 	slave->mtd.size = part->size;
 	slave->mtd.writesize = master->writesize;
+	slave->mtd.writebufsize = master->writebufsize;
 	slave->mtd.oobsize = master->oobsize;
 	slave->mtd.oobavail = master->oobavail;
 	slave->mtd.subpage_sft = master->subpage_sft;
 
-	slave->mtd.name = part->name;
+	slave->mtd.name = name;
 	slave->mtd.owner = master->owner;
 	slave->mtd.backing_dev_info = master->backing_dev_info;
 
@@ -361,52 +378,55 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 	 */
 	slave->mtd.dev.parent = master->dev.parent;
 
-	slave->mtd.read = part_read;
-	slave->mtd.write = part_write;
+	slave->mtd._read = part_read;
+	slave->mtd._write = part_write;
 
-	if (master->panic_write)
-		slave->mtd.panic_write = part_panic_write;
+	if (master->_panic_write)
+		slave->mtd._panic_write = part_panic_write;
 
-	if (master->point && master->unpoint) {
-		slave->mtd.point = part_point;
-		slave->mtd.unpoint = part_unpoint;
+	if (master->_point && master->_unpoint) {
+		slave->mtd._point = part_point;
+		slave->mtd._unpoint = part_unpoint;
 	}
 
-	if (master->get_unmapped_area)
-		slave->mtd.get_unmapped_area = part_get_unmapped_area;
-	if (master->read_oob)
-		slave->mtd.read_oob = part_read_oob;
-	if (master->write_oob)
-		slave->mtd.write_oob = part_write_oob;
-	if (master->read_user_prot_reg)
-		slave->mtd.read_user_prot_reg = part_read_user_prot_reg;
-	if (master->read_fact_prot_reg)
-		slave->mtd.read_fact_prot_reg = part_read_fact_prot_reg;
-	if (master->write_user_prot_reg)
-		slave->mtd.write_user_prot_reg = part_write_user_prot_reg;
-	if (master->lock_user_prot_reg)
-		slave->mtd.lock_user_prot_reg = part_lock_user_prot_reg;
-	if (master->get_user_prot_info)
-		slave->mtd.get_user_prot_info = part_get_user_prot_info;
-	if (master->get_fact_prot_info)
-		slave->mtd.get_fact_prot_info = part_get_fact_prot_info;
-	if (master->sync)
-		slave->mtd.sync = part_sync;
-	if (!partno && !master->dev.class && master->suspend && master->resume) {
-			slave->mtd.suspend = part_suspend;
-			slave->mtd.resume = part_resume;
+	if (master->_get_unmapped_area)
+		slave->mtd._get_unmapped_area = part_get_unmapped_area;
+	if (master->_read_oob)
+		slave->mtd._read_oob = part_read_oob;
+	if (master->_write_oob)
+		slave->mtd._write_oob = part_write_oob;
+	if (master->_read_user_prot_reg)
+		slave->mtd._read_user_prot_reg = part_read_user_prot_reg;
+	if (master->_read_fact_prot_reg)
+		slave->mtd._read_fact_prot_reg = part_read_fact_prot_reg;
+	if (master->_write_user_prot_reg)
+		slave->mtd._write_user_prot_reg = part_write_user_prot_reg;
+	if (master->_lock_user_prot_reg)
+		slave->mtd._lock_user_prot_reg = part_lock_user_prot_reg;
+	if (master->_get_user_prot_info)
+		slave->mtd._get_user_prot_info = part_get_user_prot_info;
+	if (master->_get_fact_prot_info)
+		slave->mtd._get_fact_prot_info = part_get_fact_prot_info;
+	if (master->_sync)
+		slave->mtd._sync = part_sync;
+	if (!partno && !master->dev.class && master->_suspend &&
+	    master->_resume) {
+			slave->mtd._suspend = part_suspend;
+			slave->mtd._resume = part_resume;
 	}
-	if (master->writev)
-		slave->mtd.writev = part_writev;
-	if (master->lock)
-		slave->mtd.lock = part_lock;
-	if (master->unlock)
-		slave->mtd.unlock = part_unlock;
-	if (master->block_isbad)
-		slave->mtd.block_isbad = part_block_isbad;
-	if (master->block_markbad)
-		slave->mtd.block_markbad = part_block_markbad;
-	slave->mtd.erase = part_erase;
+	if (master->_writev)
+		slave->mtd._writev = part_writev;
+	if (master->_lock)
+		slave->mtd._lock = part_lock;
+	if (master->_unlock)
+		slave->mtd._unlock = part_unlock;
+	if (master->_is_locked)
+		slave->mtd._is_locked = part_is_locked;
+	if (master->_block_isbad)
+		slave->mtd._block_isbad = part_block_isbad;
+	if (master->_block_markbad)
+		slave->mtd._block_markbad = part_block_markbad;
+	slave->mtd._erase = part_erase;
 	slave->master = master;
 	slave->offset = part->offset;
 
@@ -422,6 +442,19 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 			       (unsigned long long)cur_offset, (unsigned long long)slave->offset);
 		}
 	}
+	if (slave->offset == MTDPART_OFS_RETAIN) {
+		slave->offset = cur_offset;
+		if (master->size - slave->offset >= slave->mtd.size) {
+			slave->mtd.size = master->size - slave->offset
+							- slave->mtd.size;
+		} else {
+			printk(KERN_ERR "mtd partition \"%s\" doesn't have enough space: %#llx < %#llx, disabled\n",
+				part->name, master->size - slave->offset,
+				slave->mtd.size);
+			/* register to preserve ordering */
+			goto out_register;
+		}
+	}
 	if (slave->mtd.size == MTDPART_SIZ_FULL)
 		slave->mtd.size = master->size - slave->offset;
 
@@ -485,24 +518,104 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 	}
 
 	slave->mtd.ecclayout = master->ecclayout;
-	if (master->block_isbad) {
+	slave->mtd.ecc_step_size = master->ecc_step_size;
+	slave->mtd.ecc_strength = master->ecc_strength;
+	slave->mtd.bitflip_threshold = master->bitflip_threshold;
+
+	if (master->_block_isbad) {
 		uint64_t offs = 0;
 
 		while (offs < slave->mtd.size) {
-			if (master->block_isbad(master,
-						offs + slave->offset))
+			if (mtd_block_isbad(master, offs + slave->offset))
 				slave->mtd.ecc_stats.badblocks++;
 			offs += slave->mtd.erasesize;
 		}
 	}
 
 out_register:
-	/* register our partition */
-	add_mtd_device(&slave->mtd);
-
 	return slave;
 }
 
+int mtd_add_partition(struct mtd_info *master, const char *name,
+		      long long offset, long long length)
+{
+	struct mtd_partition part;
+	struct mtd_part *p, *new;
+	uint64_t start, end;
+	int ret = 0;
+
+	/* the direct offset is expected */
+	if (offset == MTDPART_OFS_APPEND ||
+	    offset == MTDPART_OFS_NXTBLK)
+		return -EINVAL;
+
+	if (length == MTDPART_SIZ_FULL)
+		length = master->size - offset;
+
+	if (length <= 0)
+		return -EINVAL;
+
+	part.name = name;
+	part.size = length;
+	part.offset = offset;
+	part.mask_flags = 0;
+	part.ecclayout = NULL;
+
+	new = allocate_partition(master, &part, -1, offset);
+	if (IS_ERR(new))
+		return PTR_ERR(new);
+
+	start = offset;
+	end = offset + length;
+
+	mutex_lock(&mtd_partitions_mutex);
+	list_for_each_entry(p, &mtd_partitions, list)
+		if (p->master == master) {
+			if ((start >= p->offset) &&
+			    (start < (p->offset + p->mtd.size)))
+				goto err_inv;
+
+			if ((end >= p->offset) &&
+			    (end < (p->offset + p->mtd.size)))
+				goto err_inv;
+		}
+
+	list_add(&new->list, &mtd_partitions);
+	mutex_unlock(&mtd_partitions_mutex);
+
+	add_mtd_device(&new->mtd);
+
+	return ret;
+err_inv:
+	mutex_unlock(&mtd_partitions_mutex);
+	free_partition(new);
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(mtd_add_partition);
+
+int mtd_del_partition(struct mtd_info *master, int partno)
+{
+	struct mtd_part *slave, *next;
+	int ret = -EINVAL;
+
+	mutex_lock(&mtd_partitions_mutex);
+	list_for_each_entry_safe(slave, next, &mtd_partitions, list)
+		if ((slave->master == master) &&
+		    (slave->mtd.index == partno)) {
+			ret = del_mtd_device(&slave->mtd);
+			if (ret < 0)
+				break;
+
+			list_del(&slave->list);
+			free_partition(slave);
+			break;
+		}
+	mutex_unlock(&mtd_partitions_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(mtd_del_partition);
+
 /*
  * This function, given a master MTD object and a partition table, creates
  * and registers slave MTD objects which are bound to the master according to
@@ -523,15 +636,21 @@ int add_mtd_partitions(struct mtd_info *master,
 	printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
 
 	for (i = 0; i < nbparts; i++) {
-		slave = add_one_partition(master, parts + i, i, cur_offset);
-		if (!slave)
-			return -ENOMEM;
+		slave = allocate_partition(master, parts + i, i, cur_offset);
+		if (IS_ERR(slave))
+			return PTR_ERR(slave);
+
+		mutex_lock(&mtd_partitions_mutex);
+		list_add(&slave->list, &mtd_partitions);
+		mutex_unlock(&mtd_partitions_mutex);
+
+		add_mtd_device(&slave->mtd);
+
 		cur_offset = slave->offset + slave->mtd.size;
 	}
 
 	return 0;
 }
-EXPORT_SYMBOL(add_mtd_partitions);
 
 static DEFINE_SPINLOCK(part_parser_lock);
 static LIST_HEAD(part_parsers);
@@ -553,47 +672,104 @@ static struct mtd_part_parser *get_partition_parser(const char *name)
 	return ret;
 }
 
-int register_mtd_parser(struct mtd_part_parser *p)
+#define put_partition_parser(p) do { module_put((p)->owner); } while (0)
+
+void register_mtd_parser(struct mtd_part_parser *p)
 {
 	spin_lock(&part_parser_lock);
 	list_add(&p->list, &part_parsers);
 	spin_unlock(&part_parser_lock);
-
-	return 0;
 }
 EXPORT_SYMBOL_GPL(register_mtd_parser);
 
-int deregister_mtd_parser(struct mtd_part_parser *p)
+void deregister_mtd_parser(struct mtd_part_parser *p)
 {
 	spin_lock(&part_parser_lock);
 	list_del(&p->list);
 	spin_unlock(&part_parser_lock);
-	return 0;
 }
 EXPORT_SYMBOL_GPL(deregister_mtd_parser);
 
-int parse_mtd_partitions(struct mtd_info *master, const char **types,
-			 struct mtd_partition **pparts, unsigned long origin)
+/*
+ * Do not forget to update 'parse_mtd_partitions()' kerneldoc comment if you
+ * are changing this array!
+ */
+static const char * const default_mtd_part_types[] = {
+	"cmdlinepart",
+	"ofpart",
+	NULL
+};
+
+/**
+ * parse_mtd_partitions - parse MTD partitions
+ * @master: the master partition (describes whole MTD device)
+ * @types: names of partition parsers to try or %NULL
+ * @pparts: array of partitions found is returned here
+ * @data: MTD partition parser-specific data
+ *
+ * This function tries to find partition on MTD device @master. It uses MTD
+ * partition parsers, specified in @types. However, if @types is %NULL, then
+ * the default list of parsers is used. The default list contains only the
+ * "cmdlinepart" and "ofpart" parsers ATM.
+ * Note: If there are more then one parser in @types, the kernel only takes the
+ * partitions parsed out by the first parser.
+ *
+ * This function may return:
+ * o a negative error code in case of failure
+ * o zero if no partitions were found
+ * o a positive number of found partitions, in which case on exit @pparts will
+ *   point to an array containing this number of &struct mtd_info objects.
+ */
+int parse_mtd_partitions(struct mtd_info *master, const char *const *types,
+			 struct mtd_partition **pparts,
+			 struct mtd_part_parser_data *data)
 {
 	struct mtd_part_parser *parser;
 	int ret = 0;
 
+	if (!types)
+		types = default_mtd_part_types;
+
 	for ( ; ret <= 0 && *types; types++) {
 		parser = get_partition_parser(*types);
 		if (!parser && !request_module("%s", *types))
-				parser = get_partition_parser(*types);
-		if (!parser) {
-			printk(KERN_NOTICE "%s partition parsing not available\n",
-			       *types);
+			parser = get_partition_parser(*types);
+		if (!parser)
 			continue;
-		}
-		ret = (*parser->parse_fn)(master, pparts, origin);
+		ret = (*parser->parse_fn)(master, pparts, data);
+		put_partition_parser(parser);
 		if (ret > 0) {
 			printk(KERN_NOTICE "%d %s partitions found on MTD device %s\n",
 			       ret, parser->name, master->name);
+			break;
 		}
-		put_partition_parser(parser);
 	}
 	return ret;
 }
-EXPORT_SYMBOL_GPL(parse_mtd_partitions);
+
+int mtd_is_partition(const struct mtd_info *mtd)
+{
+	struct mtd_part *part;
+	int ispart = 0;
+
+	mutex_lock(&mtd_partitions_mutex);
+	list_for_each_entry(part, &mtd_partitions, list)
+		if (&part->mtd == mtd) {
+			ispart = 1;
+			break;
+		}
+	mutex_unlock(&mtd_partitions_mutex);
+
+	return ispart;
+}
+EXPORT_SYMBOL_GPL(mtd_is_partition);
+
+/* Returns the size of the entire flash chip */
+uint64_t mtd_get_device_size(const struct mtd_info *mtd)
+{
+	if (!mtd_is_partition(mtd))
+		return mtd->size;
+
+	return PART(mtd)->master->size;
+}
+EXPORT_SYMBOL_GPL(mtd_get_device_size);
diff --git a/drivers/mtd/mtdsuper.c b/drivers/mtd/mtdsuper.c
index bd9a443ccf6..20c02a3b741 100644
--- a/drivers/mtd/mtdsuper.c
+++ b/drivers/mtd/mtdsuper.c
@@ -1,6 +1,8 @@
 /* MTD-based superblock management
  *
  * Copyright © 2001-2007 Red Hat, Inc. All Rights Reserved.
+ * Copyright © 2001-2010 David Woodhouse <dwmw2@infradead.org>
+ *
  * Written by:  David Howells <dhowells@redhat.com>
  *              David Woodhouse <dwmw2@infradead.org>
  *
@@ -12,8 +14,10 @@
 
 #include <linux/mtd/super.h>
 #include <linux/namei.h>
+#include <linux/export.h>
 #include <linux/ctype.h>
 #include <linux/slab.h>
+#include <linux/major.h>
 
 /*
  * compare superblocks to see if they're equivalent
@@ -24,12 +28,12 @@ static int get_sb_mtd_compare(struct super_block *sb, void *_mtd)
 	struct mtd_info *mtd = _mtd;
 
 	if (sb->s_mtd == mtd) {
-		DEBUG(2, "MTDSB: Match on device %d (\"%s\")\n",
+		pr_debug("MTDSB: Match on device %d (\"%s\")\n",
 		      mtd->index, mtd->name);
 		return 1;
 	}
 
-	DEBUG(2, "MTDSB: No match, device %d (\"%s\"), device %d (\"%s\")\n",
+	pr_debug("MTDSB: No match, device %d (\"%s\"), device %d (\"%s\")\n",
 	      sb->s_mtd->index, sb->s_mtd->name, mtd->index, mtd->name);
 	return 0;
 }
@@ -52,16 +56,15 @@ static int get_sb_mtd_set(struct super_block *sb, void *_mtd)
 /*
  * get a superblock on an MTD-backed filesystem
  */
-static int get_sb_mtd_aux(struct file_system_type *fs_type, int flags,
+static struct dentry *mount_mtd_aux(struct file_system_type *fs_type, int flags,
 			  const char *dev_name, void *data,
 			  struct mtd_info *mtd,
-			  int (*fill_super)(struct super_block *, void *, int),
-			  struct vfsmount *mnt)
+			  int (*fill_super)(struct super_block *, void *, int))
 {
 	struct super_block *sb;
 	int ret;
 
-	sb = sget(fs_type, get_sb_mtd_compare, get_sb_mtd_set, mtd);
+	sb = sget(fs_type, get_sb_mtd_compare, get_sb_mtd_set, flags, mtd);
 	if (IS_ERR(sb))
 		goto out_error;
 
@@ -69,65 +72,55 @@ static int get_sb_mtd_aux(struct file_system_type *fs_type, int flags,
 		goto already_mounted;
 
 	/* fresh new superblock */
-	DEBUG(1, "MTDSB: New superblock for device %d (\"%s\")\n",
+	pr_debug("MTDSB: New superblock for device %d (\"%s\")\n",
 	      mtd->index, mtd->name);
 
-	sb->s_flags = flags;
-
 	ret = fill_super(sb, data, flags & MS_SILENT ? 1 : 0);
 	if (ret < 0) {
 		deactivate_locked_super(sb);
-		return ret;
+		return ERR_PTR(ret);
 	}
 
 	/* go */
 	sb->s_flags |= MS_ACTIVE;
-	simple_set_mnt(mnt, sb);
-
-	return 0;
+	return dget(sb->s_root);
 
 	/* new mountpoint for an already mounted superblock */
 already_mounted:
-	DEBUG(1, "MTDSB: Device %d (\"%s\") is already mounted\n",
+	pr_debug("MTDSB: Device %d (\"%s\") is already mounted\n",
 	      mtd->index, mtd->name);
-	simple_set_mnt(mnt, sb);
-	ret = 0;
-	goto out_put;
+	put_mtd_device(mtd);
+	return dget(sb->s_root);
 
 out_error:
-	ret = PTR_ERR(sb);
-out_put:
 	put_mtd_device(mtd);
-	return ret;
+	return ERR_CAST(sb);
 }
 
 /*
  * get a superblock on an MTD-backed filesystem by MTD device number
  */
-static int get_sb_mtd_nr(struct file_system_type *fs_type, int flags,
+static struct dentry *mount_mtd_nr(struct file_system_type *fs_type, int flags,
 			 const char *dev_name, void *data, int mtdnr,
-			 int (*fill_super)(struct super_block *, void *, int),
-			 struct vfsmount *mnt)
+			 int (*fill_super)(struct super_block *, void *, int))
 {
 	struct mtd_info *mtd;
 
 	mtd = get_mtd_device(NULL, mtdnr);
 	if (IS_ERR(mtd)) {
-		DEBUG(0, "MTDSB: Device #%u doesn't appear to exist\n", mtdnr);
-		return PTR_ERR(mtd);
+		pr_debug("MTDSB: Device #%u doesn't appear to exist\n", mtdnr);
+		return ERR_CAST(mtd);
 	}
 
-	return get_sb_mtd_aux(fs_type, flags, dev_name, data, mtd, fill_super,
-			      mnt);
+	return mount_mtd_aux(fs_type, flags, dev_name, data, mtd, fill_super);
 }
 
 /*
  * set up an MTD-based superblock
  */
-int get_sb_mtd(struct file_system_type *fs_type, int flags,
+struct dentry *mount_mtd(struct file_system_type *fs_type, int flags,
 	       const char *dev_name, void *data,
-	       int (*fill_super)(struct super_block *, void *, int),
-	       struct vfsmount *mnt)
+	       int (*fill_super)(struct super_block *, void *, int))
 {
 #ifdef CONFIG_BLOCK
 	struct block_device *bdev;
@@ -136,9 +129,9 @@ int get_sb_mtd(struct file_system_type *fs_type, int flags,
 	int mtdnr;
 
 	if (!dev_name)
-		return -EINVAL;
+		return ERR_PTR(-EINVAL);
 
-	DEBUG(2, "MTDSB: dev_name \"%s\"\n", dev_name);
+	pr_debug("MTDSB: dev_name \"%s\"\n", dev_name);
 
 	/* the preferred way of mounting in future; especially when
 	 * CONFIG_BLOCK=n - we specify the underlying MTD device by number or
@@ -149,15 +142,15 @@ int get_sb_mtd(struct file_system_type *fs_type, int flags,
 			struct mtd_info *mtd;
 
 			/* mount by MTD device name */
-			DEBUG(1, "MTDSB: mtd:%%s, name \"%s\"\n",
+			pr_debug("MTDSB: mtd:%%s, name \"%s\"\n",
 			      dev_name + 4);
 
 			mtd = get_mtd_device_nm(dev_name + 4);
 			if (!IS_ERR(mtd))
-				return get_sb_mtd_aux(
+				return mount_mtd_aux(
 					fs_type, flags,
 					dev_name, data, mtd,
-					fill_super, mnt);
+					fill_super);
 
 			printk(KERN_NOTICE "MTD:"
 			       " MTD device with name \"%s\" not found.\n",
@@ -170,11 +163,11 @@ int get_sb_mtd(struct file_system_type *fs_type, int flags,
 			mtdnr = simple_strtoul(dev_name + 3, &endptr, 0);
 			if (!*endptr) {
 				/* It was a valid number */
-				DEBUG(1, "MTDSB: mtd%%d, mtdnr %d\n",
+				pr_debug("MTDSB: mtd%%d, mtdnr %d\n",
 				      mtdnr);
-				return get_sb_mtd_nr(fs_type, flags,
+				return mount_mtd_nr(fs_type, flags,
 						     dev_name, data,
-						     mtdnr, fill_super, mnt);
+						     mtdnr, fill_super);
 			}
 		}
 	}
@@ -186,10 +179,10 @@ int get_sb_mtd(struct file_system_type *fs_type, int flags,
 	bdev = lookup_bdev(dev_name);
 	if (IS_ERR(bdev)) {
 		ret = PTR_ERR(bdev);
-		DEBUG(1, "MTDSB: lookup_bdev() returned %d\n", ret);
-		return ret;
+		pr_debug("MTDSB: lookup_bdev() returned %d\n", ret);
+		return ERR_PTR(ret);
 	}
-	DEBUG(1, "MTDSB: lookup_bdev() returned 0\n");
+	pr_debug("MTDSB: lookup_bdev() returned 0\n");
 
 	ret = -EINVAL;
 
@@ -200,8 +193,7 @@ int get_sb_mtd(struct file_system_type *fs_type, int flags,
 	if (major != MTD_BLOCK_MAJOR)
 		goto not_an_MTD_device;
 
-	return get_sb_mtd_nr(fs_type, flags, dev_name, data, mtdnr, fill_super,
-			     mnt);
+	return mount_mtd_nr(fs_type, flags, dev_name, data, mtdnr, fill_super);
 
 not_an_MTD_device:
 #endif /* CONFIG_BLOCK */
@@ -210,10 +202,10 @@ not_an_MTD_device:
 		printk(KERN_NOTICE
 		       "MTD: Attempt to mount non-MTD device \"%s\"\n",
 		       dev_name);
-	return -EINVAL;
+	return ERR_PTR(-EINVAL);
 }
 
-EXPORT_SYMBOL_GPL(get_sb_mtd);
+EXPORT_SYMBOL_GPL(mount_mtd);
 
 /*
  * destroy an MTD-based superblock
diff --git a/drivers/mtd/mtdswap.c b/drivers/mtd/mtdswap.c
new file mode 100644
index 00000000000..8b33b26eb12
--- /dev/null
+++ b/drivers/mtd/mtdswap.c
@@ -0,0 +1,1591 @@
+/*
+ * Swap block device support for MTDs
+ * Turns an MTD device into a swap device with block wear leveling
+ *
+ * Copyright © 2007,2011 Nokia Corporation. All rights reserved.
+ *
+ * Authors: Jarkko Lavinen <jarkko.lavinen@nokia.com>
+ *
+ * Based on Richard Purdie's earlier implementation in 2007. Background
+ * support and lock-less operation written by Adrian Hunter.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/blktrans.h>
+#include <linux/rbtree.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/genhd.h>
+#include <linux/swap.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/device.h>
+#include <linux/math64.h>
+
+#define MTDSWAP_PREFIX "mtdswap"
+
+/*
+ * The number of free eraseblocks when GC should stop
+ */
+#define CLEAN_BLOCK_THRESHOLD	20
+
+/*
+ * Number of free eraseblocks below which GC can also collect low frag
+ * blocks.
+ */
+#define LOW_FRAG_GC_TRESHOLD	5
+
+/*
+ * Wear level cost amortization. We want to do wear leveling on the background
+ * without disturbing gc too much. This is made by defining max GC frequency.
+ * Frequency value 6 means 1/6 of the GC passes will pick an erase block based
+ * on the biggest wear difference rather than the biggest dirtiness.
+ *
+ * The lower freq2 should be chosen so that it makes sure the maximum erase
+ * difference will decrease even if a malicious application is deliberately
+ * trying to make erase differences large.
+ */
+#define MAX_ERASE_DIFF		4000
+#define COLLECT_NONDIRTY_BASE	MAX_ERASE_DIFF
+#define COLLECT_NONDIRTY_FREQ1	6
+#define COLLECT_NONDIRTY_FREQ2	4
+
+#define PAGE_UNDEF		UINT_MAX
+#define BLOCK_UNDEF		UINT_MAX
+#define BLOCK_ERROR		(UINT_MAX - 1)
+#define BLOCK_MAX		(UINT_MAX - 2)
+
+#define EBLOCK_BAD		(1 << 0)
+#define EBLOCK_NOMAGIC		(1 << 1)
+#define EBLOCK_BITFLIP		(1 << 2)
+#define EBLOCK_FAILED		(1 << 3)
+#define EBLOCK_READERR		(1 << 4)
+#define EBLOCK_IDX_SHIFT	5
+
+struct swap_eb {
+	struct rb_node rb;
+	struct rb_root *root;
+
+	unsigned int flags;
+	unsigned int active_count;
+	unsigned int erase_count;
+	unsigned int pad;		/* speeds up pointer decrement */
+};
+
+#define MTDSWAP_ECNT_MIN(rbroot) (rb_entry(rb_first(rbroot), struct swap_eb, \
+				rb)->erase_count)
+#define MTDSWAP_ECNT_MAX(rbroot) (rb_entry(rb_last(rbroot), struct swap_eb, \
+				rb)->erase_count)
+
+struct mtdswap_tree {
+	struct rb_root root;
+	unsigned int count;
+};
+
+enum {
+	MTDSWAP_CLEAN,
+	MTDSWAP_USED,
+	MTDSWAP_LOWFRAG,
+	MTDSWAP_HIFRAG,
+	MTDSWAP_DIRTY,
+	MTDSWAP_BITFLIP,
+	MTDSWAP_FAILING,
+	MTDSWAP_TREE_CNT,
+};
+
+struct mtdswap_dev {
+	struct mtd_blktrans_dev *mbd_dev;
+	struct mtd_info *mtd;
+	struct device *dev;
+
+	unsigned int *page_data;
+	unsigned int *revmap;
+
+	unsigned int eblks;
+	unsigned int spare_eblks;
+	unsigned int pages_per_eblk;
+	unsigned int max_erase_count;
+	struct swap_eb *eb_data;
+
+	struct mtdswap_tree trees[MTDSWAP_TREE_CNT];
+
+	unsigned long long sect_read_count;
+	unsigned long long sect_write_count;
+	unsigned long long mtd_write_count;
+	unsigned long long mtd_read_count;
+	unsigned long long discard_count;
+	unsigned long long discard_page_count;
+
+	unsigned int curr_write_pos;
+	struct swap_eb *curr_write;
+
+	char *page_buf;
+	char *oob_buf;
+
+	struct dentry *debugfs_root;
+};
+
+struct mtdswap_oobdata {
+	__le16 magic;
+	__le32 count;
+} __attribute__((packed));
+
+#define MTDSWAP_MAGIC_CLEAN	0x2095
+#define MTDSWAP_MAGIC_DIRTY	(MTDSWAP_MAGIC_CLEAN + 1)
+#define MTDSWAP_TYPE_CLEAN	0
+#define MTDSWAP_TYPE_DIRTY	1
+#define MTDSWAP_OOBSIZE		sizeof(struct mtdswap_oobdata)
+
+#define MTDSWAP_ERASE_RETRIES	3 /* Before marking erase block bad */
+#define MTDSWAP_IO_RETRIES	3
+
+enum {
+	MTDSWAP_SCANNED_CLEAN,
+	MTDSWAP_SCANNED_DIRTY,
+	MTDSWAP_SCANNED_BITFLIP,
+	MTDSWAP_SCANNED_BAD,
+};
+
+/*
+ * In the worst case mtdswap_writesect() has allocated the last clean
+ * page from the current block and is then pre-empted by the GC
+ * thread. The thread can consume a full erase block when moving a
+ * block.
+ */
+#define MIN_SPARE_EBLOCKS	2
+#define MIN_ERASE_BLOCKS	(MIN_SPARE_EBLOCKS + 1)
+
+#define TREE_ROOT(d, name) (&d->trees[MTDSWAP_ ## name].root)
+#define TREE_EMPTY(d, name) (TREE_ROOT(d, name)->rb_node == NULL)
+#define TREE_NONEMPTY(d, name) (!TREE_EMPTY(d, name))
+#define TREE_COUNT(d, name) (d->trees[MTDSWAP_ ## name].count)
+
+#define MTDSWAP_MBD_TO_MTDSWAP(dev) ((struct mtdswap_dev *)dev->priv)
+
+static char partitions[128] = "";
+module_param_string(partitions, partitions, sizeof(partitions), 0444);
+MODULE_PARM_DESC(partitions, "MTD partition numbers to use as swap "
+		"partitions=\"1,3,5\"");
+
+static unsigned int spare_eblocks = 10;
+module_param(spare_eblocks, uint, 0444);
+MODULE_PARM_DESC(spare_eblocks, "Percentage of spare erase blocks for "
+		"garbage collection (default 10%)");
+
+static bool header; /* false */
+module_param(header, bool, 0444);
+MODULE_PARM_DESC(header,
+		"Include builtin swap header (default 0, without header)");
+
+static int mtdswap_gc(struct mtdswap_dev *d, unsigned int background);
+
+static loff_t mtdswap_eb_offset(struct mtdswap_dev *d, struct swap_eb *eb)
+{
+	return (loff_t)(eb - d->eb_data) * d->mtd->erasesize;
+}
+
+static void mtdswap_eb_detach(struct mtdswap_dev *d, struct swap_eb *eb)
+{
+	unsigned int oldidx;
+	struct mtdswap_tree *tp;
+
+	if (eb->root) {
+		tp = container_of(eb->root, struct mtdswap_tree, root);
+		oldidx = tp - &d->trees[0];
+
+		d->trees[oldidx].count--;
+		rb_erase(&eb->rb, eb->root);
+	}
+}
+
+static void __mtdswap_rb_add(struct rb_root *root, struct swap_eb *eb)
+{
+	struct rb_node **p, *parent = NULL;
+	struct swap_eb *cur;
+
+	p = &root->rb_node;
+	while (*p) {
+		parent = *p;
+		cur = rb_entry(parent, struct swap_eb, rb);
+		if (eb->erase_count > cur->erase_count)
+			p = &(*p)->rb_right;
+		else
+			p = &(*p)->rb_left;
+	}
+
+	rb_link_node(&eb->rb, parent, p);
+	rb_insert_color(&eb->rb, root);
+}
+
+static void mtdswap_rb_add(struct mtdswap_dev *d, struct swap_eb *eb, int idx)
+{
+	struct rb_root *root;
+
+	if (eb->root == &d->trees[idx].root)
+		return;
+
+	mtdswap_eb_detach(d, eb);
+	root = &d->trees[idx].root;
+	__mtdswap_rb_add(root, eb);
+	eb->root = root;
+	d->trees[idx].count++;
+}
+
+static struct rb_node *mtdswap_rb_index(struct rb_root *root, unsigned int idx)
+{
+	struct rb_node *p;
+	unsigned int i;
+
+	p = rb_first(root);
+	i = 0;
+	while (i < idx && p) {
+		p = rb_next(p);
+		i++;
+	}
+
+	return p;
+}
+
+static int mtdswap_handle_badblock(struct mtdswap_dev *d, struct swap_eb *eb)
+{
+	int ret;
+	loff_t offset;
+
+	d->spare_eblks--;
+	eb->flags |= EBLOCK_BAD;
+	mtdswap_eb_detach(d, eb);
+	eb->root = NULL;
+
+	/* badblocks not supported */
+	if (!mtd_can_have_bb(d->mtd))
+		return 1;
+
+	offset = mtdswap_eb_offset(d, eb);
+	dev_warn(d->dev, "Marking bad block at %08llx\n", offset);
+	ret = mtd_block_markbad(d->mtd, offset);
+
+	if (ret) {
+		dev_warn(d->dev, "Mark block bad failed for block at %08llx "
+			"error %d\n", offset, ret);
+		return ret;
+	}
+
+	return 1;
+
+}
+
+static int mtdswap_handle_write_error(struct mtdswap_dev *d, struct swap_eb *eb)
+{
+	unsigned int marked = eb->flags & EBLOCK_FAILED;
+	struct swap_eb *curr_write = d->curr_write;
+
+	eb->flags |= EBLOCK_FAILED;
+	if (curr_write == eb) {
+		d->curr_write = NULL;
+
+		if (!marked && d->curr_write_pos != 0) {
+			mtdswap_rb_add(d, eb, MTDSWAP_FAILING);
+			return 0;
+		}
+	}
+
+	return mtdswap_handle_badblock(d, eb);
+}
+
+static int mtdswap_read_oob(struct mtdswap_dev *d, loff_t from,
+			struct mtd_oob_ops *ops)
+{
+	int ret = mtd_read_oob(d->mtd, from, ops);
+
+	if (mtd_is_bitflip(ret))
+		return ret;
+
+	if (ret) {
+		dev_warn(d->dev, "Read OOB failed %d for block at %08llx\n",
+			ret, from);
+		return ret;
+	}
+
+	if (ops->oobretlen < ops->ooblen) {
+		dev_warn(d->dev, "Read OOB return short read (%zd bytes not "
+			"%zd) for block at %08llx\n",
+			ops->oobretlen, ops->ooblen, from);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int mtdswap_read_markers(struct mtdswap_dev *d, struct swap_eb *eb)
+{
+	struct mtdswap_oobdata *data, *data2;
+	int ret;
+	loff_t offset;
+	struct mtd_oob_ops ops;
+
+	offset = mtdswap_eb_offset(d, eb);
+
+	/* Check first if the block is bad. */
+	if (mtd_can_have_bb(d->mtd) && mtd_block_isbad(d->mtd, offset))
+		return MTDSWAP_SCANNED_BAD;
+
+	ops.ooblen = 2 * d->mtd->ecclayout->oobavail;
+	ops.oobbuf = d->oob_buf;
+	ops.ooboffs = 0;
+	ops.datbuf = NULL;
+	ops.mode = MTD_OPS_AUTO_OOB;
+
+	ret = mtdswap_read_oob(d, offset, &ops);
+
+	if (ret && !mtd_is_bitflip(ret))
+		return ret;
+
+	data = (struct mtdswap_oobdata *)d->oob_buf;
+	data2 = (struct mtdswap_oobdata *)
+		(d->oob_buf + d->mtd->ecclayout->oobavail);
+
+	if (le16_to_cpu(data->magic) == MTDSWAP_MAGIC_CLEAN) {
+		eb->erase_count = le32_to_cpu(data->count);
+		if (mtd_is_bitflip(ret))
+			ret = MTDSWAP_SCANNED_BITFLIP;
+		else {
+			if (le16_to_cpu(data2->magic) == MTDSWAP_MAGIC_DIRTY)
+				ret = MTDSWAP_SCANNED_DIRTY;
+			else
+				ret = MTDSWAP_SCANNED_CLEAN;
+		}
+	} else {
+		eb->flags |= EBLOCK_NOMAGIC;
+		ret = MTDSWAP_SCANNED_DIRTY;
+	}
+
+	return ret;
+}
+
+static int mtdswap_write_marker(struct mtdswap_dev *d, struct swap_eb *eb,
+				u16 marker)
+{
+	struct mtdswap_oobdata n;
+	int ret;
+	loff_t offset;
+	struct mtd_oob_ops ops;
+
+	ops.ooboffs = 0;
+	ops.oobbuf = (uint8_t *)&n;
+	ops.mode = MTD_OPS_AUTO_OOB;
+	ops.datbuf = NULL;
+
+	if (marker == MTDSWAP_TYPE_CLEAN) {
+		n.magic = cpu_to_le16(MTDSWAP_MAGIC_CLEAN);
+		n.count = cpu_to_le32(eb->erase_count);
+		ops.ooblen = MTDSWAP_OOBSIZE;
+		offset = mtdswap_eb_offset(d, eb);
+	} else {
+		n.magic = cpu_to_le16(MTDSWAP_MAGIC_DIRTY);
+		ops.ooblen = sizeof(n.magic);
+		offset = mtdswap_eb_offset(d, eb) + d->mtd->writesize;
+	}
+
+	ret = mtd_write_oob(d->mtd, offset, &ops);
+
+	if (ret) {
+		dev_warn(d->dev, "Write OOB failed for block at %08llx "
+			"error %d\n", offset, ret);
+		if (ret == -EIO || mtd_is_eccerr(ret))
+			mtdswap_handle_write_error(d, eb);
+		return ret;
+	}
+
+	if (ops.oobretlen != ops.ooblen) {
+		dev_warn(d->dev, "Short OOB write for block at %08llx: "
+			"%zd not %zd\n",
+			offset, ops.oobretlen, ops.ooblen);
+		return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * Are there any erase blocks without MAGIC_CLEAN header, presumably
+ * because power was cut off after erase but before header write? We
+ * need to guestimate the erase count.
+ */
+static void mtdswap_check_counts(struct mtdswap_dev *d)
+{
+	struct rb_root hist_root = RB_ROOT;
+	struct rb_node *medrb;
+	struct swap_eb *eb;
+	unsigned int i, cnt, median;
+
+	cnt = 0;
+	for (i = 0; i < d->eblks; i++) {
+		eb = d->eb_data + i;
+
+		if (eb->flags & (EBLOCK_NOMAGIC | EBLOCK_BAD | EBLOCK_READERR))
+			continue;
+
+		__mtdswap_rb_add(&hist_root, eb);
+		cnt++;
+	}
+
+	if (cnt == 0)
+		return;
+
+	medrb = mtdswap_rb_index(&hist_root, cnt / 2);
+	median = rb_entry(medrb, struct swap_eb, rb)->erase_count;
+
+	d->max_erase_count = MTDSWAP_ECNT_MAX(&hist_root);
+
+	for (i = 0; i < d->eblks; i++) {
+		eb = d->eb_data + i;
+
+		if (eb->flags & (EBLOCK_NOMAGIC | EBLOCK_READERR))
+			eb->erase_count = median;
+
+		if (eb->flags & (EBLOCK_NOMAGIC | EBLOCK_BAD | EBLOCK_READERR))
+			continue;
+
+		rb_erase(&eb->rb, &hist_root);
+	}
+}
+
+static void mtdswap_scan_eblks(struct mtdswap_dev *d)
+{
+	int status;
+	unsigned int i, idx;
+	struct swap_eb *eb;
+
+	for (i = 0; i < d->eblks; i++) {
+		eb = d->eb_data + i;
+
+		status = mtdswap_read_markers(d, eb);
+		if (status < 0)
+			eb->flags |= EBLOCK_READERR;
+		else if (status == MTDSWAP_SCANNED_BAD) {
+			eb->flags |= EBLOCK_BAD;
+			continue;
+		}
+
+		switch (status) {
+		case MTDSWAP_SCANNED_CLEAN:
+			idx = MTDSWAP_CLEAN;
+			break;
+		case MTDSWAP_SCANNED_DIRTY:
+		case MTDSWAP_SCANNED_BITFLIP:
+			idx = MTDSWAP_DIRTY;
+			break;
+		default:
+			idx = MTDSWAP_FAILING;
+		}
+
+		eb->flags |= (idx << EBLOCK_IDX_SHIFT);
+	}
+
+	mtdswap_check_counts(d);
+
+	for (i = 0; i < d->eblks; i++) {
+		eb = d->eb_data + i;
+
+		if (eb->flags & EBLOCK_BAD)
+			continue;
+
+		idx = eb->flags >> EBLOCK_IDX_SHIFT;
+		mtdswap_rb_add(d, eb, idx);
+	}
+}
+
+/*
+ * Place eblk into a tree corresponding to its number of active blocks
+ * it contains.
+ */
+static void mtdswap_store_eb(struct mtdswap_dev *d, struct swap_eb *eb)
+{
+	unsigned int weight = eb->active_count;
+	unsigned int maxweight = d->pages_per_eblk;
+
+	if (eb == d->curr_write)
+		return;
+
+	if (eb->flags & EBLOCK_BITFLIP)
+		mtdswap_rb_add(d, eb, MTDSWAP_BITFLIP);
+	else if (eb->flags & (EBLOCK_READERR | EBLOCK_FAILED))
+		mtdswap_rb_add(d, eb, MTDSWAP_FAILING);
+	if (weight == maxweight)
+		mtdswap_rb_add(d, eb, MTDSWAP_USED);
+	else if (weight == 0)
+		mtdswap_rb_add(d, eb, MTDSWAP_DIRTY);
+	else if (weight > (maxweight/2))
+		mtdswap_rb_add(d, eb, MTDSWAP_LOWFRAG);
+	else
+		mtdswap_rb_add(d, eb, MTDSWAP_HIFRAG);
+}
+
+
+static void mtdswap_erase_callback(struct erase_info *done)
+{
+	wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
+	wake_up(wait_q);
+}
+
+static int mtdswap_erase_block(struct mtdswap_dev *d, struct swap_eb *eb)
+{
+	struct mtd_info *mtd = d->mtd;
+	struct erase_info erase;
+	wait_queue_head_t wq;
+	unsigned int retries = 0;
+	int ret;
+
+	eb->erase_count++;
+	if (eb->erase_count > d->max_erase_count)
+		d->max_erase_count = eb->erase_count;
+
+retry:
+	init_waitqueue_head(&wq);
+	memset(&erase, 0, sizeof(struct erase_info));
+
+	erase.mtd	= mtd;
+	erase.callback	= mtdswap_erase_callback;
+	erase.addr	= mtdswap_eb_offset(d, eb);
+	erase.len	= mtd->erasesize;
+	erase.priv	= (u_long)&wq;
+
+	ret = mtd_erase(mtd, &erase);
+	if (ret) {
+		if (retries++ < MTDSWAP_ERASE_RETRIES) {
+			dev_warn(d->dev,
+				"erase of erase block %#llx on %s failed",
+				erase.addr, mtd->name);
+			yield();
+			goto retry;
+		}
+
+		dev_err(d->dev, "Cannot erase erase block %#llx on %s\n",
+			erase.addr, mtd->name);
+
+		mtdswap_handle_badblock(d, eb);
+		return -EIO;
+	}
+
+	ret = wait_event_interruptible(wq, erase.state == MTD_ERASE_DONE ||
+					   erase.state == MTD_ERASE_FAILED);
+	if (ret) {
+		dev_err(d->dev, "Interrupted erase block %#llx erassure on %s",
+			erase.addr, mtd->name);
+		return -EINTR;
+	}
+
+	if (erase.state == MTD_ERASE_FAILED) {
+		if (retries++ < MTDSWAP_ERASE_RETRIES) {
+			dev_warn(d->dev,
+				"erase of erase block %#llx on %s failed",
+				erase.addr, mtd->name);
+			yield();
+			goto retry;
+		}
+
+		mtdswap_handle_badblock(d, eb);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int mtdswap_map_free_block(struct mtdswap_dev *d, unsigned int page,
+				unsigned int *block)
+{
+	int ret;
+	struct swap_eb *old_eb = d->curr_write;
+	struct rb_root *clean_root;
+	struct swap_eb *eb;
+
+	if (old_eb == NULL || d->curr_write_pos >= d->pages_per_eblk) {
+		do {
+			if (TREE_EMPTY(d, CLEAN))
+				return -ENOSPC;
+
+			clean_root = TREE_ROOT(d, CLEAN);
+			eb = rb_entry(rb_first(clean_root), struct swap_eb, rb);
+			rb_erase(&eb->rb, clean_root);
+			eb->root = NULL;
+			TREE_COUNT(d, CLEAN)--;
+
+			ret = mtdswap_write_marker(d, eb, MTDSWAP_TYPE_DIRTY);
+		} while (ret == -EIO || mtd_is_eccerr(ret));
+
+		if (ret)
+			return ret;
+
+		d->curr_write_pos = 0;
+		d->curr_write = eb;
+		if (old_eb)
+			mtdswap_store_eb(d, old_eb);
+	}
+
+	*block = (d->curr_write - d->eb_data) * d->pages_per_eblk +
+		d->curr_write_pos;
+
+	d->curr_write->active_count++;
+	d->revmap[*block] = page;
+	d->curr_write_pos++;
+
+	return 0;
+}
+
+static unsigned int mtdswap_free_page_cnt(struct mtdswap_dev *d)
+{
+	return TREE_COUNT(d, CLEAN) * d->pages_per_eblk +
+		d->pages_per_eblk - d->curr_write_pos;
+}
+
+static unsigned int mtdswap_enough_free_pages(struct mtdswap_dev *d)
+{
+	return mtdswap_free_page_cnt(d) > d->pages_per_eblk;
+}
+
+static int mtdswap_write_block(struct mtdswap_dev *d, char *buf,
+			unsigned int page, unsigned int *bp, int gc_context)
+{
+	struct mtd_info *mtd = d->mtd;
+	struct swap_eb *eb;
+	size_t retlen;
+	loff_t writepos;
+	int ret;
+
+retry:
+	if (!gc_context)
+		while (!mtdswap_enough_free_pages(d))
+			if (mtdswap_gc(d, 0) > 0)
+				return -ENOSPC;
+
+	ret = mtdswap_map_free_block(d, page, bp);
+	eb = d->eb_data + (*bp / d->pages_per_eblk);
+
+	if (ret == -EIO || mtd_is_eccerr(ret)) {
+		d->curr_write = NULL;
+		eb->active_count--;
+		d->revmap[*bp] = PAGE_UNDEF;
+		goto retry;
+	}
+
+	if (ret < 0)
+		return ret;
+
+	writepos = (loff_t)*bp << PAGE_SHIFT;
+	ret =  mtd_write(mtd, writepos, PAGE_SIZE, &retlen, buf);
+	if (ret == -EIO || mtd_is_eccerr(ret)) {
+		d->curr_write_pos--;
+		eb->active_count--;
+		d->revmap[*bp] = PAGE_UNDEF;
+		mtdswap_handle_write_error(d, eb);
+		goto retry;
+	}
+
+	if (ret < 0) {
+		dev_err(d->dev, "Write to MTD device failed: %d (%zd written)",
+			ret, retlen);
+		goto err;
+	}
+
+	if (retlen != PAGE_SIZE) {
+		dev_err(d->dev, "Short write to MTD device: %zd written",
+			retlen);
+		ret = -EIO;
+		goto err;
+	}
+
+	return ret;
+
+err:
+	d->curr_write_pos--;
+	eb->active_count--;
+	d->revmap[*bp] = PAGE_UNDEF;
+
+	return ret;
+}
+
+static int mtdswap_move_block(struct mtdswap_dev *d, unsigned int oldblock,
+		unsigned int *newblock)
+{
+	struct mtd_info *mtd = d->mtd;
+	struct swap_eb *eb, *oldeb;
+	int ret;
+	size_t retlen;
+	unsigned int page, retries;
+	loff_t readpos;
+
+	page = d->revmap[oldblock];
+	readpos = (loff_t) oldblock << PAGE_SHIFT;
+	retries = 0;
+
+retry:
+	ret = mtd_read(mtd, readpos, PAGE_SIZE, &retlen, d->page_buf);
+
+	if (ret < 0 && !mtd_is_bitflip(ret)) {
+		oldeb = d->eb_data + oldblock / d->pages_per_eblk;
+		oldeb->flags |= EBLOCK_READERR;
+
+		dev_err(d->dev, "Read Error: %d (block %u)\n", ret,
+			oldblock);
+		retries++;
+		if (retries < MTDSWAP_IO_RETRIES)
+			goto retry;
+
+		goto read_error;
+	}
+
+	if (retlen != PAGE_SIZE) {
+		dev_err(d->dev, "Short read: %zd (block %u)\n", retlen,
+		       oldblock);
+		ret = -EIO;
+		goto read_error;
+	}
+
+	ret = mtdswap_write_block(d, d->page_buf, page, newblock, 1);
+	if (ret < 0) {
+		d->page_data[page] = BLOCK_ERROR;
+		dev_err(d->dev, "Write error: %d\n", ret);
+		return ret;
+	}
+
+	eb = d->eb_data + *newblock / d->pages_per_eblk;
+	d->page_data[page] = *newblock;
+	d->revmap[oldblock] = PAGE_UNDEF;
+	eb = d->eb_data + oldblock / d->pages_per_eblk;
+	eb->active_count--;
+
+	return 0;
+
+read_error:
+	d->page_data[page] = BLOCK_ERROR;
+	d->revmap[oldblock] = PAGE_UNDEF;
+	return ret;
+}
+
+static int mtdswap_gc_eblock(struct mtdswap_dev *d, struct swap_eb *eb)
+{
+	unsigned int i, block, eblk_base, newblock;
+	int ret, errcode;
+
+	errcode = 0;
+	eblk_base = (eb - d->eb_data) * d->pages_per_eblk;
+
+	for (i = 0; i < d->pages_per_eblk; i++) {
+		if (d->spare_eblks < MIN_SPARE_EBLOCKS)
+			return -ENOSPC;
+
+		block = eblk_base + i;
+		if (d->revmap[block] == PAGE_UNDEF)
+			continue;
+
+		ret = mtdswap_move_block(d, block, &newblock);
+		if (ret < 0 && !errcode)
+			errcode = ret;
+	}
+
+	return errcode;
+}
+
+static int __mtdswap_choose_gc_tree(struct mtdswap_dev *d)
+{
+	int idx, stopat;
+
+	if (TREE_COUNT(d, CLEAN) < LOW_FRAG_GC_TRESHOLD)
+		stopat = MTDSWAP_LOWFRAG;
+	else
+		stopat = MTDSWAP_HIFRAG;
+
+	for (idx = MTDSWAP_BITFLIP; idx >= stopat; idx--)
+		if (d->trees[idx].root.rb_node != NULL)
+			return idx;
+
+	return -1;
+}
+
+static int mtdswap_wlfreq(unsigned int maxdiff)
+{
+	unsigned int h, x, y, dist, base;
+
+	/*
+	 * Calculate linear ramp down from f1 to f2 when maxdiff goes from
+	 * MAX_ERASE_DIFF to MAX_ERASE_DIFF + COLLECT_NONDIRTY_BASE.  Similar
+	 * to triangle with height f1 - f1 and width COLLECT_NONDIRTY_BASE.
+	 */
+
+	dist = maxdiff - MAX_ERASE_DIFF;
+	if (dist > COLLECT_NONDIRTY_BASE)
+		dist = COLLECT_NONDIRTY_BASE;
+
+	/*
+	 * Modelling the slop as right angular triangle with base
+	 * COLLECT_NONDIRTY_BASE and height freq1 - freq2. The ratio y/x is
+	 * equal to the ratio h/base.
+	 */
+	h = COLLECT_NONDIRTY_FREQ1 - COLLECT_NONDIRTY_FREQ2;
+	base = COLLECT_NONDIRTY_BASE;
+
+	x = dist - base;
+	y = (x * h + base / 2) / base;
+
+	return COLLECT_NONDIRTY_FREQ2 + y;
+}
+
+static int mtdswap_choose_wl_tree(struct mtdswap_dev *d)
+{
+	static unsigned int pick_cnt;
+	unsigned int i, idx = -1, wear, max;
+	struct rb_root *root;
+
+	max = 0;
+	for (i = 0; i <= MTDSWAP_DIRTY; i++) {
+		root = &d->trees[i].root;
+		if (root->rb_node == NULL)
+			continue;
+
+		wear = d->max_erase_count - MTDSWAP_ECNT_MIN(root);
+		if (wear > max) {
+			max = wear;
+			idx = i;
+		}
+	}
+
+	if (max > MAX_ERASE_DIFF && pick_cnt >= mtdswap_wlfreq(max) - 1) {
+		pick_cnt = 0;
+		return idx;
+	}
+
+	pick_cnt++;
+	return -1;
+}
+
+static int mtdswap_choose_gc_tree(struct mtdswap_dev *d,
+				unsigned int background)
+{
+	int idx;
+
+	if (TREE_NONEMPTY(d, FAILING) &&
+		(background || (TREE_EMPTY(d, CLEAN) && TREE_EMPTY(d, DIRTY))))
+		return MTDSWAP_FAILING;
+
+	idx = mtdswap_choose_wl_tree(d);
+	if (idx >= MTDSWAP_CLEAN)
+		return idx;
+
+	return __mtdswap_choose_gc_tree(d);
+}
+
+static struct swap_eb *mtdswap_pick_gc_eblk(struct mtdswap_dev *d,
+					unsigned int background)
+{
+	struct rb_root *rp = NULL;
+	struct swap_eb *eb = NULL;
+	int idx;
+
+	if (background && TREE_COUNT(d, CLEAN) > CLEAN_BLOCK_THRESHOLD &&
+		TREE_EMPTY(d, DIRTY) && TREE_EMPTY(d, FAILING))
+		return NULL;
+
+	idx = mtdswap_choose_gc_tree(d, background);
+	if (idx < 0)
+		return NULL;
+
+	rp = &d->trees[idx].root;
+	eb = rb_entry(rb_first(rp), struct swap_eb, rb);
+
+	rb_erase(&eb->rb, rp);
+	eb->root = NULL;
+	d->trees[idx].count--;
+	return eb;
+}
+
+static unsigned int mtdswap_test_patt(unsigned int i)
+{
+	return i % 2 ? 0x55555555 : 0xAAAAAAAA;
+}
+
+static unsigned int mtdswap_eblk_passes(struct mtdswap_dev *d,
+					struct swap_eb *eb)
+{
+	struct mtd_info *mtd = d->mtd;
+	unsigned int test, i, j, patt, mtd_pages;
+	loff_t base, pos;
+	unsigned int *p1 = (unsigned int *)d->page_buf;
+	unsigned char *p2 = (unsigned char *)d->oob_buf;
+	struct mtd_oob_ops ops;
+	int ret;
+
+	ops.mode = MTD_OPS_AUTO_OOB;
+	ops.len = mtd->writesize;
+	ops.ooblen = mtd->ecclayout->oobavail;
+	ops.ooboffs = 0;
+	ops.datbuf = d->page_buf;
+	ops.oobbuf = d->oob_buf;
+	base = mtdswap_eb_offset(d, eb);
+	mtd_pages = d->pages_per_eblk * PAGE_SIZE / mtd->writesize;
+
+	for (test = 0; test < 2; test++) {
+		pos = base;
+		for (i = 0; i < mtd_pages; i++) {
+			patt = mtdswap_test_patt(test + i);
+			memset(d->page_buf, patt, mtd->writesize);
+			memset(d->oob_buf, patt, mtd->ecclayout->oobavail);
+			ret = mtd_write_oob(mtd, pos, &ops);
+			if (ret)
+				goto error;
+
+			pos += mtd->writesize;
+		}
+
+		pos = base;
+		for (i = 0; i < mtd_pages; i++) {
+			ret = mtd_read_oob(mtd, pos, &ops);
+			if (ret)
+				goto error;
+
+			patt = mtdswap_test_patt(test + i);
+			for (j = 0; j < mtd->writesize/sizeof(int); j++)
+				if (p1[j] != patt)
+					goto error;
+
+			for (j = 0; j < mtd->ecclayout->oobavail; j++)
+				if (p2[j] != (unsigned char)patt)
+					goto error;
+
+			pos += mtd->writesize;
+		}
+
+		ret = mtdswap_erase_block(d, eb);
+		if (ret)
+			goto error;
+	}
+
+	eb->flags &= ~EBLOCK_READERR;
+	return 1;
+
+error:
+	mtdswap_handle_badblock(d, eb);
+	return 0;
+}
+
+static int mtdswap_gc(struct mtdswap_dev *d, unsigned int background)
+{
+	struct swap_eb *eb;
+	int ret;
+
+	if (d->spare_eblks < MIN_SPARE_EBLOCKS)
+		return 1;
+
+	eb = mtdswap_pick_gc_eblk(d, background);
+	if (!eb)
+		return 1;
+
+	ret = mtdswap_gc_eblock(d, eb);
+	if (ret == -ENOSPC)
+		return 1;
+
+	if (eb->flags & EBLOCK_FAILED) {
+		mtdswap_handle_badblock(d, eb);
+		return 0;
+	}
+
+	eb->flags &= ~EBLOCK_BITFLIP;
+	ret = mtdswap_erase_block(d, eb);
+	if ((eb->flags & EBLOCK_READERR) &&
+		(ret || !mtdswap_eblk_passes(d, eb)))
+		return 0;
+
+	if (ret == 0)
+		ret = mtdswap_write_marker(d, eb, MTDSWAP_TYPE_CLEAN);
+
+	if (ret == 0)
+		mtdswap_rb_add(d, eb, MTDSWAP_CLEAN);
+	else if (ret != -EIO && !mtd_is_eccerr(ret))
+		mtdswap_rb_add(d, eb, MTDSWAP_DIRTY);
+
+	return 0;
+}
+
+static void mtdswap_background(struct mtd_blktrans_dev *dev)
+{
+	struct mtdswap_dev *d = MTDSWAP_MBD_TO_MTDSWAP(dev);
+	int ret;
+
+	while (1) {
+		ret = mtdswap_gc(d, 1);
+		if (ret || mtd_blktrans_cease_background(dev))
+			return;
+	}
+}
+
+static void mtdswap_cleanup(struct mtdswap_dev *d)
+{
+	vfree(d->eb_data);
+	vfree(d->revmap);
+	vfree(d->page_data);
+	kfree(d->oob_buf);
+	kfree(d->page_buf);
+}
+
+static int mtdswap_flush(struct mtd_blktrans_dev *dev)
+{
+	struct mtdswap_dev *d = MTDSWAP_MBD_TO_MTDSWAP(dev);
+
+	mtd_sync(d->mtd);
+	return 0;
+}
+
+static unsigned int mtdswap_badblocks(struct mtd_info *mtd, uint64_t size)
+{
+	loff_t offset;
+	unsigned int badcnt;
+
+	badcnt = 0;
+
+	if (mtd_can_have_bb(mtd))
+		for (offset = 0; offset < size; offset += mtd->erasesize)
+			if (mtd_block_isbad(mtd, offset))
+				badcnt++;
+
+	return badcnt;
+}
+
+static int mtdswap_writesect(struct mtd_blktrans_dev *dev,
+			unsigned long page, char *buf)
+{
+	struct mtdswap_dev *d = MTDSWAP_MBD_TO_MTDSWAP(dev);
+	unsigned int newblock, mapped;
+	struct swap_eb *eb;
+	int ret;
+
+	d->sect_write_count++;
+
+	if (d->spare_eblks < MIN_SPARE_EBLOCKS)
+		return -ENOSPC;
+
+	if (header) {
+		/* Ignore writes to the header page */
+		if (unlikely(page == 0))
+			return 0;
+
+		page--;
+	}
+
+	mapped = d->page_data[page];
+	if (mapped <= BLOCK_MAX) {
+		eb = d->eb_data + (mapped / d->pages_per_eblk);
+		eb->active_count--;
+		mtdswap_store_eb(d, eb);
+		d->page_data[page] = BLOCK_UNDEF;
+		d->revmap[mapped] = PAGE_UNDEF;
+	}
+
+	ret = mtdswap_write_block(d, buf, page, &newblock, 0);
+	d->mtd_write_count++;
+
+	if (ret < 0)
+		return ret;
+
+	eb = d->eb_data + (newblock / d->pages_per_eblk);
+	d->page_data[page] = newblock;
+
+	return 0;
+}
+
+/* Provide a dummy swap header for the kernel */
+static int mtdswap_auto_header(struct mtdswap_dev *d, char *buf)
+{
+	union swap_header *hd = (union swap_header *)(buf);
+
+	memset(buf, 0, PAGE_SIZE - 10);
+
+	hd->info.version = 1;
+	hd->info.last_page = d->mbd_dev->size - 1;
+	hd->info.nr_badpages = 0;
+
+	memcpy(buf + PAGE_SIZE - 10, "SWAPSPACE2", 10);
+
+	return 0;
+}
+
+static int mtdswap_readsect(struct mtd_blktrans_dev *dev,
+			unsigned long page, char *buf)
+{
+	struct mtdswap_dev *d = MTDSWAP_MBD_TO_MTDSWAP(dev);
+	struct mtd_info *mtd = d->mtd;
+	unsigned int realblock, retries;
+	loff_t readpos;
+	struct swap_eb *eb;
+	size_t retlen;
+	int ret;
+
+	d->sect_read_count++;
+
+	if (header) {
+		if (unlikely(page == 0))
+			return mtdswap_auto_header(d, buf);
+
+		page--;
+	}
+
+	realblock = d->page_data[page];
+	if (realblock > BLOCK_MAX) {
+		memset(buf, 0x0, PAGE_SIZE);
+		if (realblock == BLOCK_UNDEF)
+			return 0;
+		else
+			return -EIO;
+	}
+
+	eb = d->eb_data + (realblock / d->pages_per_eblk);
+	BUG_ON(d->revmap[realblock] == PAGE_UNDEF);
+
+	readpos = (loff_t)realblock << PAGE_SHIFT;
+	retries = 0;
+
+retry:
+	ret = mtd_read(mtd, readpos, PAGE_SIZE, &retlen, buf);
+
+	d->mtd_read_count++;
+	if (mtd_is_bitflip(ret)) {
+		eb->flags |= EBLOCK_BITFLIP;
+		mtdswap_rb_add(d, eb, MTDSWAP_BITFLIP);
+		ret = 0;
+	}
+
+	if (ret < 0) {
+		dev_err(d->dev, "Read error %d\n", ret);
+		eb->flags |= EBLOCK_READERR;
+		mtdswap_rb_add(d, eb, MTDSWAP_FAILING);
+		retries++;
+		if (retries < MTDSWAP_IO_RETRIES)
+			goto retry;
+
+		return ret;
+	}
+
+	if (retlen != PAGE_SIZE) {
+		dev_err(d->dev, "Short read %zd\n", retlen);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int mtdswap_discard(struct mtd_blktrans_dev *dev, unsigned long first,
+			unsigned nr_pages)
+{
+	struct mtdswap_dev *d = MTDSWAP_MBD_TO_MTDSWAP(dev);
+	unsigned long page;
+	struct swap_eb *eb;
+	unsigned int mapped;
+
+	d->discard_count++;
+
+	for (page = first; page < first + nr_pages; page++) {
+		mapped = d->page_data[page];
+		if (mapped <= BLOCK_MAX) {
+			eb = d->eb_data + (mapped / d->pages_per_eblk);
+			eb->active_count--;
+			mtdswap_store_eb(d, eb);
+			d->page_data[page] = BLOCK_UNDEF;
+			d->revmap[mapped] = PAGE_UNDEF;
+			d->discard_page_count++;
+		} else if (mapped == BLOCK_ERROR) {
+			d->page_data[page] = BLOCK_UNDEF;
+			d->discard_page_count++;
+		}
+	}
+
+	return 0;
+}
+
+static int mtdswap_show(struct seq_file *s, void *data)
+{
+	struct mtdswap_dev *d = (struct mtdswap_dev *) s->private;
+	unsigned long sum;
+	unsigned int count[MTDSWAP_TREE_CNT];
+	unsigned int min[MTDSWAP_TREE_CNT];
+	unsigned int max[MTDSWAP_TREE_CNT];
+	unsigned int i, cw = 0, cwp = 0, cwecount = 0, bb_cnt, mapped, pages;
+	uint64_t use_size;
+	char *name[] = {"clean", "used", "low", "high", "dirty", "bitflip",
+			"failing"};
+
+	mutex_lock(&d->mbd_dev->lock);
+
+	for (i = 0; i < MTDSWAP_TREE_CNT; i++) {
+		struct rb_root *root = &d->trees[i].root;
+
+		if (root->rb_node) {
+			count[i] = d->trees[i].count;
+			min[i] = rb_entry(rb_first(root), struct swap_eb,
+					rb)->erase_count;
+			max[i] = rb_entry(rb_last(root), struct swap_eb,
+					rb)->erase_count;
+		} else
+			count[i] = 0;
+	}
+
+	if (d->curr_write) {
+		cw = 1;
+		cwp = d->curr_write_pos;
+		cwecount = d->curr_write->erase_count;
+	}
+
+	sum = 0;
+	for (i = 0; i < d->eblks; i++)
+		sum += d->eb_data[i].erase_count;
+
+	use_size = (uint64_t)d->eblks * d->mtd->erasesize;
+	bb_cnt = mtdswap_badblocks(d->mtd, use_size);
+
+	mapped = 0;
+	pages = d->mbd_dev->size;
+	for (i = 0; i < pages; i++)
+		if (d->page_data[i] != BLOCK_UNDEF)
+			mapped++;
+
+	mutex_unlock(&d->mbd_dev->lock);
+
+	for (i = 0; i < MTDSWAP_TREE_CNT; i++) {
+		if (!count[i])
+			continue;
+
+		if (min[i] != max[i])
+			seq_printf(s, "%s:\t%5d erase blocks, erased min %d, "
+				"max %d times\n",
+				name[i], count[i], min[i], max[i]);
+		else
+			seq_printf(s, "%s:\t%5d erase blocks, all erased %d "
+				"times\n", name[i], count[i], min[i]);
+	}
+
+	if (bb_cnt)
+		seq_printf(s, "bad:\t%5u erase blocks\n", bb_cnt);
+
+	if (cw)
+		seq_printf(s, "current erase block: %u pages used, %u free, "
+			"erased %u times\n",
+			cwp, d->pages_per_eblk - cwp, cwecount);
+
+	seq_printf(s, "total erasures: %lu\n", sum);
+
+	seq_printf(s, "\n");
+
+	seq_printf(s, "mtdswap_readsect count: %llu\n", d->sect_read_count);
+	seq_printf(s, "mtdswap_writesect count: %llu\n", d->sect_write_count);
+	seq_printf(s, "mtdswap_discard count: %llu\n", d->discard_count);
+	seq_printf(s, "mtd read count: %llu\n", d->mtd_read_count);
+	seq_printf(s, "mtd write count: %llu\n", d->mtd_write_count);
+	seq_printf(s, "discarded pages count: %llu\n", d->discard_page_count);
+
+	seq_printf(s, "\n");
+	seq_printf(s, "total pages: %u\n", pages);
+	seq_printf(s, "pages mapped: %u\n", mapped);
+
+	return 0;
+}
+
+static int mtdswap_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, mtdswap_show, inode->i_private);
+}
+
+static const struct file_operations mtdswap_fops = {
+	.open		= mtdswap_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int mtdswap_add_debugfs(struct mtdswap_dev *d)
+{
+	struct gendisk *gd = d->mbd_dev->disk;
+	struct device *dev = disk_to_dev(gd);
+
+	struct dentry *root;
+	struct dentry *dent;
+
+	root = debugfs_create_dir(gd->disk_name, NULL);
+	if (IS_ERR(root))
+		return 0;
+
+	if (!root) {
+		dev_err(dev, "failed to initialize debugfs\n");
+		return -1;
+	}
+
+	d->debugfs_root = root;
+
+	dent = debugfs_create_file("stats", S_IRUSR, root, d,
+				&mtdswap_fops);
+	if (!dent) {
+		dev_err(d->dev, "debugfs_create_file failed\n");
+		debugfs_remove_recursive(root);
+		d->debugfs_root = NULL;
+		return -1;
+	}
+
+	return 0;
+}
+
+static int mtdswap_init(struct mtdswap_dev *d, unsigned int eblocks,
+			unsigned int spare_cnt)
+{
+	struct mtd_info *mtd = d->mbd_dev->mtd;
+	unsigned int i, eblk_bytes, pages, blocks;
+	int ret = -ENOMEM;
+
+	d->mtd = mtd;
+	d->eblks = eblocks;
+	d->spare_eblks = spare_cnt;
+	d->pages_per_eblk = mtd->erasesize >> PAGE_SHIFT;
+
+	pages = d->mbd_dev->size;
+	blocks = eblocks * d->pages_per_eblk;
+
+	for (i = 0; i < MTDSWAP_TREE_CNT; i++)
+		d->trees[i].root = RB_ROOT;
+
+	d->page_data = vmalloc(sizeof(int)*pages);
+	if (!d->page_data)
+		goto page_data_fail;
+
+	d->revmap = vmalloc(sizeof(int)*blocks);
+	if (!d->revmap)
+		goto revmap_fail;
+
+	eblk_bytes = sizeof(struct swap_eb)*d->eblks;
+	d->eb_data = vzalloc(eblk_bytes);
+	if (!d->eb_data)
+		goto eb_data_fail;
+
+	for (i = 0; i < pages; i++)
+		d->page_data[i] = BLOCK_UNDEF;
+
+	for (i = 0; i < blocks; i++)
+		d->revmap[i] = PAGE_UNDEF;
+
+	d->page_buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	if (!d->page_buf)
+		goto page_buf_fail;
+
+	d->oob_buf = kmalloc(2 * mtd->ecclayout->oobavail, GFP_KERNEL);
+	if (!d->oob_buf)
+		goto oob_buf_fail;
+
+	mtdswap_scan_eblks(d);
+
+	return 0;
+
+oob_buf_fail:
+	kfree(d->page_buf);
+page_buf_fail:
+	vfree(d->eb_data);
+eb_data_fail:
+	vfree(d->revmap);
+revmap_fail:
+	vfree(d->page_data);
+page_data_fail:
+	printk(KERN_ERR "%s: init failed (%d)\n", MTDSWAP_PREFIX, ret);
+	return ret;
+}
+
+static void mtdswap_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
+{
+	struct mtdswap_dev *d;
+	struct mtd_blktrans_dev *mbd_dev;
+	char *parts;
+	char *this_opt;
+	unsigned long part;
+	unsigned int eblocks, eavailable, bad_blocks, spare_cnt;
+	uint64_t swap_size, use_size, size_limit;
+	struct nand_ecclayout *oinfo;
+	int ret;
+
+	parts = &partitions[0];
+	if (!*parts)
+		return;
+
+	while ((this_opt = strsep(&parts, ",")) != NULL) {
+		if (kstrtoul(this_opt, 0, &part) < 0)
+			return;
+
+		if (mtd->index == part)
+			break;
+	}
+
+	if (mtd->index != part)
+		return;
+
+	if (mtd->erasesize < PAGE_SIZE || mtd->erasesize % PAGE_SIZE) {
+		printk(KERN_ERR "%s: Erase size %u not multiple of PAGE_SIZE "
+			"%lu\n", MTDSWAP_PREFIX, mtd->erasesize, PAGE_SIZE);
+		return;
+	}
+
+	if (PAGE_SIZE % mtd->writesize || mtd->writesize > PAGE_SIZE) {
+		printk(KERN_ERR "%s: PAGE_SIZE %lu not multiple of write size"
+			" %u\n", MTDSWAP_PREFIX, PAGE_SIZE, mtd->writesize);
+		return;
+	}
+
+	oinfo = mtd->ecclayout;
+	if (!oinfo) {
+		printk(KERN_ERR "%s: mtd%d does not have OOB\n",
+			MTDSWAP_PREFIX, mtd->index);
+		return;
+	}
+
+	if (!mtd->oobsize || oinfo->oobavail < MTDSWAP_OOBSIZE) {
+		printk(KERN_ERR "%s: Not enough free bytes in OOB, "
+			"%d available, %zu needed.\n",
+			MTDSWAP_PREFIX, oinfo->oobavail, MTDSWAP_OOBSIZE);
+		return;
+	}
+
+	if (spare_eblocks > 100)
+		spare_eblocks = 100;
+
+	use_size = mtd->size;
+	size_limit = (uint64_t) BLOCK_MAX * PAGE_SIZE;
+
+	if (mtd->size > size_limit) {
+		printk(KERN_WARNING "%s: Device too large. Limiting size to "
+			"%llu bytes\n", MTDSWAP_PREFIX, size_limit);
+		use_size = size_limit;
+	}
+
+	eblocks = mtd_div_by_eb(use_size, mtd);
+	use_size = eblocks * mtd->erasesize;
+	bad_blocks = mtdswap_badblocks(mtd, use_size);
+	eavailable = eblocks - bad_blocks;
+
+	if (eavailable < MIN_ERASE_BLOCKS) {
+		printk(KERN_ERR "%s: Not enough erase blocks. %u available, "
+			"%d needed\n", MTDSWAP_PREFIX, eavailable,
+			MIN_ERASE_BLOCKS);
+		return;
+	}
+
+	spare_cnt = div_u64((uint64_t)eavailable * spare_eblocks, 100);
+
+	if (spare_cnt < MIN_SPARE_EBLOCKS)
+		spare_cnt = MIN_SPARE_EBLOCKS;
+
+	if (spare_cnt > eavailable - 1)
+		spare_cnt = eavailable - 1;
+
+	swap_size = (uint64_t)(eavailable - spare_cnt) * mtd->erasesize +
+		(header ? PAGE_SIZE : 0);
+
+	printk(KERN_INFO "%s: Enabling MTD swap on device %lu, size %llu KB, "
+		"%u spare, %u bad blocks\n",
+		MTDSWAP_PREFIX, part, swap_size / 1024, spare_cnt, bad_blocks);
+
+	d = kzalloc(sizeof(struct mtdswap_dev), GFP_KERNEL);
+	if (!d)
+		return;
+
+	mbd_dev = kzalloc(sizeof(struct mtd_blktrans_dev), GFP_KERNEL);
+	if (!mbd_dev) {
+		kfree(d);
+		return;
+	}
+
+	d->mbd_dev = mbd_dev;
+	mbd_dev->priv = d;
+
+	mbd_dev->mtd = mtd;
+	mbd_dev->devnum = mtd->index;
+	mbd_dev->size = swap_size >> PAGE_SHIFT;
+	mbd_dev->tr = tr;
+
+	if (!(mtd->flags & MTD_WRITEABLE))
+		mbd_dev->readonly = 1;
+
+	if (mtdswap_init(d, eblocks, spare_cnt) < 0)
+		goto init_failed;
+
+	if (add_mtd_blktrans_dev(mbd_dev) < 0)
+		goto cleanup;
+
+	d->dev = disk_to_dev(mbd_dev->disk);
+
+	ret = mtdswap_add_debugfs(d);
+	if (ret < 0)
+		goto debugfs_failed;
+
+	return;
+
+debugfs_failed:
+	del_mtd_blktrans_dev(mbd_dev);
+
+cleanup:
+	mtdswap_cleanup(d);
+
+init_failed:
+	kfree(mbd_dev);
+	kfree(d);
+}
+
+static void mtdswap_remove_dev(struct mtd_blktrans_dev *dev)
+{
+	struct mtdswap_dev *d = MTDSWAP_MBD_TO_MTDSWAP(dev);
+
+	debugfs_remove_recursive(d->debugfs_root);
+	del_mtd_blktrans_dev(dev);
+	mtdswap_cleanup(d);
+	kfree(d);
+}
+
+static struct mtd_blktrans_ops mtdswap_ops = {
+	.name		= "mtdswap",
+	.major		= 0,
+	.part_bits	= 0,
+	.blksize	= PAGE_SIZE,
+	.flush		= mtdswap_flush,
+	.readsect	= mtdswap_readsect,
+	.writesect	= mtdswap_writesect,
+	.discard	= mtdswap_discard,
+	.background	= mtdswap_background,
+	.add_mtd	= mtdswap_add_mtd,
+	.remove_dev	= mtdswap_remove_dev,
+	.owner		= THIS_MODULE,
+};
+
+static int __init mtdswap_modinit(void)
+{
+	return register_mtd_blktrans(&mtdswap_ops);
+}
+
+static void __exit mtdswap_modexit(void)
+{
+	deregister_mtd_blktrans(&mtdswap_ops);
+}
+
+module_init(mtdswap_modinit);
+module_exit(mtdswap_modexit);
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jarkko Lavinen <jarkko.lavinen@nokia.com>");
+MODULE_DESCRIPTION("Block device access to an MTD suitable for using as "
+		"swap space");
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index ffc3720929f..f1cf503517f 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -22,45 +22,51 @@ menuconfig MTD_NAND
 
 if MTD_NAND
 
-config MTD_NAND_VERIFY_WRITE
-	bool "Verify NAND page writes"
-	help
-	  This adds an extra check when data is written to the flash. The
-	  NAND flash device internally checks only bits transitioning
-	  from 1 to 0. There is a rare possibility that even though the
-	  device thinks the write was successful, a bit could have been
-	  flipped accidentally due to device wear or something else.
-
-config MTD_SM_COMMON
+config MTD_NAND_BCH
 	tristate
-	default n
+	select BCH
+	depends on MTD_NAND_ECC_BCH
+	default MTD_NAND
 
-config MTD_NAND_MUSEUM_IDS
-	bool "Enable chip ids for obsolete ancient NAND devices"
-	depends on MTD_NAND
+config MTD_NAND_ECC_BCH
+	bool "Support software BCH ECC"
 	default n
 	help
-	  Enable this option only when your board has first generation
-	  NAND chips (page size 256 byte, erase size 4-8KiB). The IDs
-	  of these chips were reused by later, larger chips.
+	  This enables support for software BCH error correction. Binary BCH
+	  codes are more powerful and cpu intensive than traditional Hamming
+	  ECC codes. They are used with NAND devices requiring more than 1 bit
+	  of error correction.
 
-config MTD_NAND_AUTCPU12
-	tristate "SmartMediaCard on autronix autcpu12 board"
-	depends on ARCH_AUTCPU12
-	help
-	  This enables the driver for the autronix autcpu12 board to
-	  access the SmartMediaCard.
+config MTD_SM_COMMON
+	tristate
+	default n
 
 config MTD_NAND_DENALI
-       depends on PCI
+        tristate "Support Denali NAND controller"
+        depends on HAS_DMA
+        help
+	  Enable support for the Denali NAND controller.  This should be
+	  combined with either the PCI or platform drivers to provide device
+	  registration.
+
+config MTD_NAND_DENALI_PCI
         tristate "Support Denali NAND controller on Intel Moorestown"
+	depends on PCI && MTD_NAND_DENALI
         help
           Enable the driver for NAND flash on Intel Moorestown, using the
           Denali NAND controller core.
- 
+
+config MTD_NAND_DENALI_DT
+	tristate "Support Denali NAND controller as a DT device"
+	depends on HAVE_CLK && MTD_NAND_DENALI
+	help
+	  Enable the driver for NAND flash on platforms using a Denali NAND
+	  controller as a DT device.
+
 config MTD_NAND_DENALI_SCRATCH_REG_ADDR
         hex "Denali NAND size scratch register address"
         default "0xFF108018"
+        depends on MTD_NAND_DENALI_PCI
         help
           Some platforms place the NAND chip size in a scratch register
           because (some versions of) the driver aren't able to automatically
@@ -68,59 +74,37 @@ config MTD_NAND_DENALI_SCRATCH_REG_ADDR
           scratch register here to enable this feature. On Intel Moorestown
           boards, the scratch register is at 0xFF108018.
 
-config MTD_NAND_EDB7312
-	tristate "Support for Cirrus Logic EBD7312 evaluation board"
-	depends on ARCH_EDB7312
-	help
-	  This enables the driver for the Cirrus Logic EBD7312 evaluation
-	  board to access the onboard NAND Flash.
-
-config MTD_NAND_H1900
-	tristate "iPAQ H1900 flash"
-	depends on ARCH_PXA && MTD_PARTITIONS
-	help
-	  This enables the driver for the iPAQ h1900 flash.
-
 config MTD_NAND_GPIO
 	tristate "GPIO NAND Flash driver"
-	depends on GENERIC_GPIO && ARM
+	depends on GPIOLIB
 	help
 	  This enables a GPIO based NAND flash driver.
 
-config MTD_NAND_SPIA
-	tristate "NAND Flash device on SPIA board"
-	depends on ARCH_P720T
-	help
-	  If you had to ask, you don't have one. Say 'N'.
-
 config MTD_NAND_AMS_DELTA
 	tristate "NAND Flash device on Amstrad E3"
 	depends on MACH_AMS_DELTA
+	default y
 	help
 	  Support for NAND flash on Amstrad E3 (Delta).
 
 config MTD_NAND_OMAP2
-	tristate "NAND Flash device on OMAP2 and OMAP3"
-	depends on ARM && MTD_NAND && (ARCH_OMAP2 || ARCH_OMAP3)
-	help
-          Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms.
-
-config MTD_NAND_OMAP_PREFETCH
-	bool "GPMC prefetch support for NAND Flash device"
-	depends on MTD_NAND && MTD_NAND_OMAP2
-	default y
+	tristate "NAND Flash device on OMAP2, OMAP3 and OMAP4"
+	depends on ARCH_OMAP2PLUS
 	help
-	 The NAND device can be accessed for Read/Write using GPMC PREFETCH engine
-	 to improve the performance.
+          Support for NAND flash on Texas Instruments OMAP2, OMAP3 and OMAP4
+	  platforms.
 
-config MTD_NAND_OMAP_PREFETCH_DMA
-	depends on MTD_NAND_OMAP_PREFETCH
-	bool "DMA mode"
+config MTD_NAND_OMAP_BCH
+	depends on MTD_NAND_OMAP2
+	tristate "Support hardware based BCH error correction"
 	default n
+	select BCH
 	help
-	 The GPMC PREFETCH engine can be configured eigther in MPU interrupt mode
-	 or in DMA interrupt mode.
-	 Say y for DMA mode or MPU mode will be used
+	  This config enables the ELM hardware engine, which can be used to
+	  locate and correct errors when using BCH ECC scheme. This offloads
+	  the cpu from doing ECC error searching and correction. However some
+	  legacy OMAP families like OMAP2xxx, OMAP3xxx do not have ELM engine
+	  so they should not enable this config symbol.
 
 config MTD_NAND_IDS
 	tristate
@@ -139,14 +123,14 @@ config MTD_NAND_RICOH
 
 config MTD_NAND_AU1550
 	tristate "Au1550/1200 NAND support"
-	depends on SOC_AU1200 || SOC_AU1550
+	depends on MIPS_ALCHEMY
 	help
 	  This enables the driver for the NAND flash controller on the
 	  AMD/Alchemy 1550 SOC.
 
 config MTD_NAND_BF5XX
 	tristate "Blackfin on-chip NAND Flash Controller driver"
-	depends on (BF54x || BF52x) && MTD_NAND
+	depends on BF54x || BF52x
 	help
 	  This enables the Blackfin on-chip NAND flash controller
 
@@ -176,25 +160,9 @@ config MTD_NAND_BF5XX_BOOTROM_ECC
 
 	  If unsure, say N.
 
-config MTD_NAND_RTC_FROM4
-	tristate "Renesas Flash ROM 4-slot interface board (FROM_BOARD4)"
-	depends on SH_SOLUTION_ENGINE
-	select REED_SOLOMON
-	select REED_SOLOMON_DEC8
-	select BITREVERSE
-	help
-	  This enables the driver for the Renesas Technology AG-AND
-	  flash interface board (FROM_BOARD4)
-
-config MTD_NAND_PPCHAMELEONEVB
-	tristate "NAND Flash device on PPChameleonEVB board"
-	depends on PPCHAMELEONEVB && BROKEN
-	help
-	  This enables the NAND flash driver on the PPChameleon EVB Board.
-
 config MTD_NAND_S3C2410
 	tristate "NAND Flash support for Samsung S3C SoCs"
-	depends on ARCH_S3C2410 || ARCH_S3C64XX
+	depends on ARCH_S3C24XX || ARCH_S3C64XX
 	help
 	  This enables the NAND flash controller on the S3C24xx and S3C64xx
 	  SoCs
@@ -234,25 +202,9 @@ config MTD_NAND_S3C2410_CLKSTOP
 	  when the is NAND chip selected or released, but will save
 	  approximately 5mA of power when there is nothing happening.
 
-config MTD_NAND_BCM_UMI
-	tristate "NAND Flash support for BCM Reference Boards"
-	depends on ARCH_BCMRING && MTD_NAND
-	help
-	  This enables the NAND flash controller on the BCM UMI block.
-
-	  No board specfic support is done by this driver, each board
-	  must advertise a platform_device for the driver to attach.
-
-config MTD_NAND_BCM_UMI_HWCS
-	bool "BCM UMI NAND Hardware CS"
-	depends on MTD_NAND_BCM_UMI
-	help
-	  Enable the use of the BCM UMI block's internal CS using NAND.
-	  This should only be used if you know the external NAND CS can toggle.
-
 config MTD_NAND_DISKONCHIP
-	tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation) (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation)"
+	depends on HAS_IOMEM
 	select REED_SOLOMON
 	select REED_SOLOMON_DEC16
 	help
@@ -320,6 +272,26 @@ config MTD_NAND_DISKONCHIP_BBTWRITE
 	  load time (assuming you build diskonchip as a module) with the module
 	  parameter "inftl_bbt_write=1".
 
+config MTD_NAND_DOCG4
+	tristate "Support for DiskOnChip G4"
+	depends on HAS_IOMEM
+	select BCH
+	select BITREVERSE
+	help
+	  Support for diskonchip G4 nand flash, found in various smartphones and
+	  PDAs, among them the Palm Treo680, HTC Prophet and Wizard, Toshiba
+	  Portege G900, Asus P526, and O2 XDA Zinc.
+
+	  With this driver you will be able to use UBI and create a ubifs on the
+	  device, so you may wish to consider enabling UBI and UBIFS as well.
+
+	  These devices ship with the Mys/Sandisk SAFTL formatting, for which
+	  there is currently no mtd parser, so you may want to use command line
+	  partitioning to segregate write-protected blocks. On the Treo680, the
+	  first five erase blocks (256KiB each) are write-protected, followed
+	  by the block containing the saftl partition table.  This is probably
+	  typical.
+
 config MTD_NAND_SHARPSL
 	tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)"
 	depends on ARCH_PXA
@@ -352,104 +324,90 @@ config MTD_NAND_ATMEL
 	help
 	  Enables support for NAND Flash / Smart Media Card interface
 	  on Atmel AT91 and AVR32 processors.
-choice
-	prompt "ECC management for NAND Flash / SmartMedia on AT91 / AVR32"
-	depends on MTD_NAND_ATMEL
-
-config MTD_NAND_ATMEL_ECC_HW
-	bool "Hardware ECC"
-	depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9260 || AVR32
-	help
-	  Use hardware ECC instead of software ECC when the chip
-	  supports it.
-
-	  The hardware ECC controller is capable of single bit error
-	  correction and 2-bit random detection per page.
-
-	  NB : hardware and software ECC schemes are incompatible.
-	  If you switch from one to another, you'll have to erase your
-	  mtd partition.
-
-	  If unsure, say Y
 
-config MTD_NAND_ATMEL_ECC_SOFT
-	bool "Software ECC"
+config MTD_NAND_PXA3xx
+	tristate "NAND support on PXA3xx and Armada 370/XP"
+	depends on PXA3xx || ARCH_MMP || PLAT_ORION
 	help
-	  Use software ECC.
-
-	  NB : hardware and software ECC schemes are incompatible.
-	  If you switch from one to another, you'll have to erase your
-	  mtd partition.
+	  This enables the driver for the NAND flash device found on
+	  PXA3xx processors (NFCv1) and also on Armada 370/XP (NFCv2).
 
-config MTD_NAND_ATMEL_ECC_NONE
-	bool "No ECC (testing only, DANGEROUS)"
-	depends on DEBUG_KERNEL
+config MTD_NAND_SLC_LPC32XX
+	tristate "NXP LPC32xx SLC Controller"
+	depends on ARCH_LPC32XX
 	help
-	  No ECC will be used.
-	  It's not a good idea and it should be reserved for testing
-	  purpose only.
+	  Enables support for NXP's LPC32XX SLC (i.e. for Single Level Cell
+	  chips) NAND controller. This is the default for the PHYTEC 3250
+	  reference board which contains a NAND256R3A2CZA6 chip.
 
-	  If unsure, say N
+	  Please check the actual NAND chip connected and its support
+	  by the SLC NAND controller.
 
-endchoice
-
-config MTD_NAND_PXA3xx
-	tristate "Support for NAND flash devices on PXA3xx"
-	depends on MTD_NAND && (PXA3xx || ARCH_MMP)
+config MTD_NAND_MLC_LPC32XX
+	tristate "NXP LPC32xx MLC Controller"
+	depends on ARCH_LPC32XX
 	help
-	  This enables the driver for the NAND flash device found on
-	  PXA3xx processors
+	  Uses the LPC32XX MLC (i.e. for Multi Level Cell chips) NAND
+	  controller. This is the default for the WORK92105 controller
+	  board.
 
-config MTD_NAND_PXA3xx_BUILTIN
-	bool "Use builtin definitions for some NAND chips (deprecated)"
-	depends on MTD_NAND_PXA3xx
-	help
-	  This enables builtin definitions for some NAND chips. This
-	  is deprecated in favor of platform specific data.
+	  Please check the actual NAND chip connected and its support
+	  by the MLC NAND controller.
 
 config MTD_NAND_CM_X270
 	tristate "Support for NAND Flash on CM-X270 modules"
-	depends on MTD_NAND && MACH_ARMCORE
+	depends on MACH_ARMCORE
 
 config MTD_NAND_PASEMI
 	tristate "NAND support for PA Semi PWRficient"
-	depends on MTD_NAND && PPC_PASEMI
+	depends on PPC_PASEMI
 	help
 	  Enables support for NAND Flash interface on PA Semi PWRficient
 	  based boards
 
 config MTD_NAND_TMIO
 	tristate "NAND Flash device on Toshiba Mobile IO Controller"
-	depends on MTD_NAND && MFD_TMIO
+	depends on MFD_TMIO
 	help
 	  Support for NAND flash connected to a Toshiba Mobile IO
 	  Controller in some PDAs, including the Sharp SL6000x.
 
 config MTD_NAND_NANDSIM
 	tristate "Support for NAND Flash Simulator"
-	depends on MTD_PARTITIONS
 	help
 	  The simulator may simulate various NAND flash chips for the
 	  MTD nand layer.
 
+config MTD_NAND_GPMI_NAND
+        tristate "GPMI NAND Flash Controller driver"
+        depends on MTD_NAND && MXS_DMA
+        help
+	 Enables NAND Flash support for IMX23, IMX28 or IMX6.
+	 The GPMI controller is very powerful, with the help of BCH
+	 module, it can do the hardware ECC. The GPMI supports several
+	 NAND flashs at the same time. The GPMI may conflicts with other
+	 block, such as SD card. So pay attention to it when you enable
+	 the GPMI.
+
+config MTD_NAND_BCM47XXNFLASH
+	tristate "Support for NAND flash on BCM4706 BCMA bus"
+	depends on BCMA_NFLASH
+	help
+	  BCMA bus can have various flash memories attached, they are
+	  registered by bcma as platform devices. This enables driver for
+	  NAND flash memories. For now only BCM4706 is supported.
+
 config MTD_NAND_PLATFORM
 	tristate "Support for generic platform NAND driver"
-	depends on MTD_NAND
+	depends on HAS_IOMEM
 	help
 	  This implements a generic NAND driver for on-SOC platform
 	  devices. You will need to provide platform-specific functions
 	  via platform_data.
 
-config MTD_ALAUDA
-	tristate "MTD driver for Olympus MAUSB-10 and Fujifilm DPC-R1"
-	depends on MTD_NAND && USB
-	help
-	  These two (and possibly other) Alauda-based cardreaders for
-	  SmartMedia and xD allow raw flash access.
-
 config MTD_NAND_ORION
 	tristate "NAND Flash support for Marvell Orion SoC"
-	depends on PLAT_ORION && MTD_NAND
+	depends on PLAT_ORION
 	help
 	  This enables the NAND flash controller on Orion machines.
 
@@ -458,16 +416,28 @@ config MTD_NAND_ORION
 
 config MTD_NAND_FSL_ELBC
 	tristate "NAND support for Freescale eLBC controllers"
-	depends on MTD_NAND && PPC_OF
+	depends on PPC_OF
+	select FSL_LBC
 	help
 	  Various Freescale chips, including the 8313, include a NAND Flash
 	  Controller Module with built-in hardware ECC capabilities.
 	  Enabling this option will enable you to use this to control
 	  external NAND devices.
 
+config MTD_NAND_FSL_IFC
+	tristate "NAND support for Freescale IFC controller"
+	depends on MTD_NAND && FSL_SOC
+	select FSL_IFC
+	select MEMORY
+	help
+	  Various Freescale chips e.g P1010, include a NAND Flash machine
+	  with built-in hardware ECC capabilities.
+	  Enabling this option will enable you to use this to control
+	  external NAND devices.
+
 config MTD_NAND_FSL_UPM
 	tristate "Support for NAND on Freescale UPM"
-	depends on MTD_NAND && (PPC_83xx || PPC_85xx)
+	depends on PPC_83xx || PPC_85xx
 	select FSL_LBC
 	help
 	  Enables support for NAND Flash chips wired onto Freescale PowerPC
@@ -482,30 +452,26 @@ config MTD_NAND_MPC5121_NFC
 
 config MTD_NAND_MXC
 	tristate "MXC NAND support"
-	depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3
+	depends on ARCH_MXC
 	help
 	  This enables the driver for the NAND flash controller on the
 	  MXC processors.
 
-config MTD_NAND_NOMADIK
-	tristate "ST Nomadik 8815 NAND support"
-	depends on ARCH_NOMADIK
-	help
-	  Driver for the NAND flash controller on the Nomadik, with ECC.
-
 config MTD_NAND_SH_FLCTL
 	tristate "Support for NAND on Renesas SuperH FLCTL"
-	depends on MTD_NAND && (SUPERH || ARCH_SHMOBILE)
+	depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
+	depends on HAS_IOMEM
+	depends on HAS_DMA
 	help
 	  Several Renesas SuperH CPU has FLCTL. This option enables support
 	  for NAND Flash using FLCTL.
 
 config MTD_NAND_DAVINCI
-        tristate "Support NAND on DaVinci SoC"
-        depends on ARCH_DAVINCI
+        tristate "Support NAND on DaVinci/Keystone SoC"
+        depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF)
         help
 	  Enable the driver for NAND flash chips on Texas Instruments
-	  DaVinci processors.
+	  DaVinci/Keystone processors.
 
 config MTD_NAND_TXX9NDFMC
 	tristate "NAND Flash support for TXx9 SoC"
@@ -515,15 +481,36 @@ config MTD_NAND_TXX9NDFMC
 
 config MTD_NAND_SOCRATES
 	tristate "Support for NAND on Socrates board"
-	depends on MTD_NAND && SOCRATES
+	depends on SOCRATES
 	help
 	  Enables support for NAND Flash chips wired onto Socrates board.
 
 config MTD_NAND_NUC900
 	tristate "Support for NAND on Nuvoton NUC9xx/w90p910 evaluation boards."
-	depends on ARCH_W90X900 && MTD_PARTITIONS
+	depends on ARCH_W90X900
 	help
 	  This enables the driver for the NAND Flash on evaluation board based
 	  on w90p910 / NUC9xx.
 
+config MTD_NAND_JZ4740
+	tristate "Support for JZ4740 SoC NAND controller"
+	depends on MACH_JZ4740
+	help
+		Enables support for NAND Flash on JZ4740 SoC based boards.
+
+config MTD_NAND_FSMC
+	tristate "Support for NAND on ST Micros FSMC"
+	depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || MACH_U300
+	help
+	  Enables support for NAND Flash chips on the ST Microelectronics
+	  Flexible Static Memory Controller (FSMC)
+
+config MTD_NAND_XWAY
+	tristate "Support for NAND on Lantiq XWAY SoC"
+	depends on LANTIQ && SOC_TYPE_XWAY
+	select MTD_NAND_PLATFORM
+	help
+	  Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
+	  to the External Bus Unit (EBU).
+
 endif # MTD_NAND
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index e8ab884ba47..542b5689eb6 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -4,23 +4,22 @@
 
 obj-$(CONFIG_MTD_NAND)			+= nand.o
 obj-$(CONFIG_MTD_NAND_ECC)		+= nand_ecc.o
+obj-$(CONFIG_MTD_NAND_BCH)		+= nand_bch.o
 obj-$(CONFIG_MTD_NAND_IDS)		+= nand_ids.o
 obj-$(CONFIG_MTD_SM_COMMON) 		+= sm_common.o
 
 obj-$(CONFIG_MTD_NAND_CAFE)		+= cafe_nand.o
-obj-$(CONFIG_MTD_NAND_SPIA)		+= spia.o
 obj-$(CONFIG_MTD_NAND_AMS_DELTA)	+= ams-delta.o
-obj-$(CONFIG_MTD_NAND_AUTCPU12)		+= autcpu12.o
 obj-$(CONFIG_MTD_NAND_DENALI)		+= denali.o
-obj-$(CONFIG_MTD_NAND_EDB7312)		+= edb7312.o
+obj-$(CONFIG_MTD_NAND_DENALI_PCI)	+= denali_pci.o
+obj-$(CONFIG_MTD_NAND_DENALI_DT)	+= denali_dt.o
 obj-$(CONFIG_MTD_NAND_AU1550)		+= au1550nd.o
 obj-$(CONFIG_MTD_NAND_BF5XX)		+= bf5xx_nand.o
-obj-$(CONFIG_MTD_NAND_PPCHAMELEONEVB)	+= ppchameleonevb.o
 obj-$(CONFIG_MTD_NAND_S3C2410)		+= s3c2410.o
 obj-$(CONFIG_MTD_NAND_DAVINCI)		+= davinci_nand.o
 obj-$(CONFIG_MTD_NAND_DISKONCHIP)	+= diskonchip.o
-obj-$(CONFIG_MTD_NAND_H1900)		+= h1910.o
-obj-$(CONFIG_MTD_NAND_RTC_FROM4)	+= rtc_from4.o
+obj-$(CONFIG_MTD_NAND_DOCG4)		+= docg4.o
+obj-$(CONFIG_MTD_NAND_FSMC)		+= fsmc_nand.o
 obj-$(CONFIG_MTD_NAND_SHARPSL)		+= sharpsl.o
 obj-$(CONFIG_MTD_NAND_NANDSIM)		+= nandsim.o
 obj-$(CONFIG_MTD_NAND_CS553X)		+= cs553x_nand.o
@@ -32,19 +31,23 @@ obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx270_nand.o
 obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
 obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
 obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
-obj-$(CONFIG_MTD_ALAUDA)		+= alauda.o
 obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
 obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o
 obj-$(CONFIG_MTD_NAND_FSL_ELBC)		+= fsl_elbc_nand.o
+obj-$(CONFIG_MTD_NAND_FSL_IFC)		+= fsl_ifc_nand.o
 obj-$(CONFIG_MTD_NAND_FSL_UPM)		+= fsl_upm.o
+obj-$(CONFIG_MTD_NAND_SLC_LPC32XX)      += lpc32xx_slc.o
+obj-$(CONFIG_MTD_NAND_MLC_LPC32XX)      += lpc32xx_mlc.o
 obj-$(CONFIG_MTD_NAND_SH_FLCTL)		+= sh_flctl.o
 obj-$(CONFIG_MTD_NAND_MXC)		+= mxc_nand.o
 obj-$(CONFIG_MTD_NAND_SOCRATES)		+= socrates_nand.o
 obj-$(CONFIG_MTD_NAND_TXX9NDFMC)	+= txx9ndfmc.o
 obj-$(CONFIG_MTD_NAND_NUC900)		+= nuc900_nand.o
-obj-$(CONFIG_MTD_NAND_NOMADIK)		+= nomadik_nand.o
-obj-$(CONFIG_MTD_NAND_BCM_UMI)		+= bcm_umi_nand.o nand_bcm_umi.o
 obj-$(CONFIG_MTD_NAND_MPC5121_NFC)	+= mpc5121_nfc.o
 obj-$(CONFIG_MTD_NAND_RICOH)		+= r852.o
+obj-$(CONFIG_MTD_NAND_JZ4740)		+= jz4740_nand.o
+obj-$(CONFIG_MTD_NAND_GPMI_NAND)	+= gpmi-nand/
+obj-$(CONFIG_MTD_NAND_XWAY)		+= xway_nand.o
+obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH)	+= bcm47xxnflash/
 
 nand-objs := nand_base.o nand_bbt.o
diff --git a/drivers/mtd/nand/alauda.c b/drivers/mtd/nand/alauda.c
deleted file mode 100644
index 8691e0482ed..00000000000
--- a/drivers/mtd/nand/alauda.c
+++ /dev/null
@@ -1,733 +0,0 @@
-/*
- * MTD driver for Alauda chips
- *
- * Copyright (C) 2007 Joern Engel <joern@logfs.org>
- *
- * Based on drivers/usb/usb-skeleton.c which is:
- * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
- * and on drivers/usb/storage/alauda.c, which is:
- *   (c) 2005 Daniel Drake <dsd@gentoo.org>
- *
- * Idea and initial work by Arnd Bergmann <arnd@arndb.de>
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/kref.h>
-#include <linux/usb.h>
-#include <linux/mutex.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand_ecc.h>
-
-/* Control commands */
-#define ALAUDA_GET_XD_MEDIA_STATUS	0x08
-#define ALAUDA_ACK_XD_MEDIA_CHANGE	0x0a
-#define ALAUDA_GET_XD_MEDIA_SIG		0x86
-
-/* Common prefix */
-#define ALAUDA_BULK_CMD			0x40
-
-/* The two ports */
-#define ALAUDA_PORT_XD			0x00
-#define ALAUDA_PORT_SM			0x01
-
-/* Bulk commands */
-#define ALAUDA_BULK_READ_PAGE		0x84
-#define ALAUDA_BULK_READ_OOB		0x85 /* don't use, there's a chip bug */
-#define ALAUDA_BULK_READ_BLOCK		0x94
-#define ALAUDA_BULK_ERASE_BLOCK		0xa3
-#define ALAUDA_BULK_WRITE_PAGE		0xa4
-#define ALAUDA_BULK_WRITE_BLOCK		0xb4
-#define ALAUDA_BULK_RESET_MEDIA		0xe0
-
-/* Address shifting */
-#define PBA_LO(pba) ((pba & 0xF) << 5)
-#define PBA_HI(pba) (pba >> 3)
-#define PBA_ZONE(pba) (pba >> 11)
-
-#define TIMEOUT HZ
-
-static const struct usb_device_id alauda_table[] = {
-	{ USB_DEVICE(0x0584, 0x0008) },	/* Fujifilm DPC-R1 */
-	{ USB_DEVICE(0x07b4, 0x010a) },	/* Olympus MAUSB-10 */
-	{ }
-};
-MODULE_DEVICE_TABLE(usb, alauda_table);
-
-struct alauda_card {
-	u8	id;		/* id byte */
-	u8	chipshift;	/* 1<<chipshift total size */
-	u8	pageshift;	/* 1<<pageshift page size */
-	u8	blockshift;	/* 1<<blockshift block size */
-};
-
-struct alauda {
-	struct usb_device	*dev;
-	struct usb_interface	*interface;
-	struct mtd_info		*mtd;
-	struct alauda_card	*card;
-	struct mutex		card_mutex;
-	u32			pagemask;
-	u32			bytemask;
-	u32			blockmask;
-	unsigned int		write_out;
-	unsigned int		bulk_in;
-	unsigned int		bulk_out;
-	u8			port;
-	struct kref		kref;
-};
-
-static struct alauda_card alauda_card_ids[] = {
-	/* NAND flash */
-	{ 0x6e, 20, 8, 12},	/* 1 MB */
-	{ 0xe8, 20, 8, 12},	/* 1 MB */
-	{ 0xec, 20, 8, 12},	/* 1 MB */
-	{ 0x64, 21, 8, 12},	/* 2 MB */
-	{ 0xea, 21, 8, 12},	/* 2 MB */
-	{ 0x6b, 22, 9, 13},	/* 4 MB */
-	{ 0xe3, 22, 9, 13},	/* 4 MB */
-	{ 0xe5, 22, 9, 13},	/* 4 MB */
-	{ 0xe6, 23, 9, 13},	/* 8 MB */
-	{ 0x73, 24, 9, 14},	/* 16 MB */
-	{ 0x75, 25, 9, 14},	/* 32 MB */
-	{ 0x76, 26, 9, 14},	/* 64 MB */
-	{ 0x79, 27, 9, 14},	/* 128 MB */
-	{ 0x71, 28, 9, 14},	/* 256 MB */
-
-	/* MASK ROM */
-	{ 0x5d, 21, 9, 13},	/* 2 MB */
-	{ 0xd5, 22, 9, 13},	/* 4 MB */
-	{ 0xd6, 23, 9, 13},	/* 8 MB */
-	{ 0x57, 24, 9, 13},	/* 16 MB */
-	{ 0x58, 25, 9, 13},	/* 32 MB */
-	{ }
-};
-
-static struct alauda_card *get_card(u8 id)
-{
-	struct alauda_card *card;
-
-	for (card = alauda_card_ids; card->id; card++)
-		if (card->id == id)
-			return card;
-	return NULL;
-}
-
-static void alauda_delete(struct kref *kref)
-{
-	struct alauda *al = container_of(kref, struct alauda, kref);
-
-	if (al->mtd) {
-		del_mtd_device(al->mtd);
-		kfree(al->mtd);
-	}
-	usb_put_dev(al->dev);
-	kfree(al);
-}
-
-static int alauda_get_media_status(struct alauda *al, void *buf)
-{
-	int ret;
-
-	mutex_lock(&al->card_mutex);
-	ret = usb_control_msg(al->dev, usb_rcvctrlpipe(al->dev, 0),
-			ALAUDA_GET_XD_MEDIA_STATUS, 0xc0, 0, 1, buf, 2, HZ);
-	mutex_unlock(&al->card_mutex);
-	return ret;
-}
-
-static int alauda_ack_media(struct alauda *al)
-{
-	int ret;
-
-	mutex_lock(&al->card_mutex);
-	ret = usb_control_msg(al->dev, usb_sndctrlpipe(al->dev, 0),
-			ALAUDA_ACK_XD_MEDIA_CHANGE, 0x40, 0, 1, NULL, 0, HZ);
-	mutex_unlock(&al->card_mutex);
-	return ret;
-}
-
-static int alauda_get_media_signatures(struct alauda *al, void *buf)
-{
-	int ret;
-
-	mutex_lock(&al->card_mutex);
-	ret = usb_control_msg(al->dev, usb_rcvctrlpipe(al->dev, 0),
-			ALAUDA_GET_XD_MEDIA_SIG, 0xc0, 0, 0, buf, 4, HZ);
-	mutex_unlock(&al->card_mutex);
-	return ret;
-}
-
-static void alauda_reset(struct alauda *al)
-{
-	u8 command[] = {
-		ALAUDA_BULK_CMD, ALAUDA_BULK_RESET_MEDIA, 0, 0,
-		0, 0, 0, 0, al->port
-	};
-	mutex_lock(&al->card_mutex);
-	usb_bulk_msg(al->dev, al->bulk_out, command, 9, NULL, HZ);
-	mutex_unlock(&al->card_mutex);
-}
-
-static void correct_data(void *buf, void *read_ecc,
-		int *corrected, int *uncorrected)
-{
-	u8 calc_ecc[3];
-	int err;
-
-	nand_calculate_ecc(NULL, buf, calc_ecc);
-	err = nand_correct_data(NULL, buf, read_ecc, calc_ecc);
-	if (err) {
-		if (err > 0)
-			(*corrected)++;
-		else
-			(*uncorrected)++;
-	}
-}
-
-struct alauda_sg_request {
-	struct urb *urb[3];
-	struct completion comp;
-};
-
-static void alauda_complete(struct urb *urb)
-{
-	struct completion *comp = urb->context;
-
-	if (comp)
-		complete(comp);
-}
-
-static int __alauda_read_page(struct mtd_info *mtd, loff_t from, void *buf,
-		void *oob)
-{
-	struct alauda_sg_request sg;
-	struct alauda *al = mtd->priv;
-	u32 pba = from >> al->card->blockshift;
-	u32 page = (from >> al->card->pageshift) & al->pagemask;
-	u8 command[] = {
-		ALAUDA_BULK_CMD, ALAUDA_BULK_READ_PAGE, PBA_HI(pba),
-		PBA_ZONE(pba), 0, PBA_LO(pba) + page, 1, 0, al->port
-	};
-	int i, err;
-
-	for (i=0; i<3; i++)
-		sg.urb[i] = NULL;
-
-	err = -ENOMEM;
-	for (i=0; i<3; i++) {
-		sg.urb[i] = usb_alloc_urb(0, GFP_NOIO);
-		if (!sg.urb[i])
-			goto out;
-	}
-	init_completion(&sg.comp);
-	usb_fill_bulk_urb(sg.urb[0], al->dev, al->bulk_out, command, 9,
-			alauda_complete, NULL);
-	usb_fill_bulk_urb(sg.urb[1], al->dev, al->bulk_in, buf, mtd->writesize,
-			alauda_complete, NULL);
-	usb_fill_bulk_urb(sg.urb[2], al->dev, al->bulk_in, oob, 16,
-			alauda_complete, &sg.comp);
-
-	mutex_lock(&al->card_mutex);
-	for (i=0; i<3; i++) {
-		err = usb_submit_urb(sg.urb[i], GFP_NOIO);
-		if (err)
-			goto cancel;
-	}
-	if (!wait_for_completion_timeout(&sg.comp, TIMEOUT)) {
-		err = -ETIMEDOUT;
-cancel:
-		for (i=0; i<3; i++) {
-			usb_kill_urb(sg.urb[i]);
-		}
-	}
-	mutex_unlock(&al->card_mutex);
-
-out:
-	usb_free_urb(sg.urb[0]);
-	usb_free_urb(sg.urb[1]);
-	usb_free_urb(sg.urb[2]);
-	return err;
-}
-
-static int alauda_read_page(struct mtd_info *mtd, loff_t from,
-		void *buf, u8 *oob, int *corrected, int *uncorrected)
-{
-	int err;
-
-	err = __alauda_read_page(mtd, from, buf, oob);
-	if (err)
-		return err;
-	correct_data(buf, oob+13, corrected, uncorrected);
-	correct_data(buf+256, oob+8, corrected, uncorrected);
-	return 0;
-}
-
-static int alauda_write_page(struct mtd_info *mtd, loff_t to, void *buf,
-		void *oob)
-{
-	struct alauda_sg_request sg;
-	struct alauda *al = mtd->priv;
-	u32 pba = to >> al->card->blockshift;
-	u32 page = (to >> al->card->pageshift) & al->pagemask;
-	u8 command[] = {
-		ALAUDA_BULK_CMD, ALAUDA_BULK_WRITE_PAGE, PBA_HI(pba),
-		PBA_ZONE(pba), 0, PBA_LO(pba) + page, 32, 0, al->port
-	};
-	int i, err;
-
-	for (i=0; i<3; i++)
-		sg.urb[i] = NULL;
-
-	err = -ENOMEM;
-	for (i=0; i<3; i++) {
-		sg.urb[i] = usb_alloc_urb(0, GFP_NOIO);
-		if (!sg.urb[i])
-			goto out;
-	}
-	init_completion(&sg.comp);
-	usb_fill_bulk_urb(sg.urb[0], al->dev, al->bulk_out, command, 9,
-			alauda_complete, NULL);
-	usb_fill_bulk_urb(sg.urb[1], al->dev, al->write_out, buf,mtd->writesize,
-			alauda_complete, NULL);
-	usb_fill_bulk_urb(sg.urb[2], al->dev, al->write_out, oob, 16,
-			alauda_complete, &sg.comp);
-
-	mutex_lock(&al->card_mutex);
-	for (i=0; i<3; i++) {
-		err = usb_submit_urb(sg.urb[i], GFP_NOIO);
-		if (err)
-			goto cancel;
-	}
-	if (!wait_for_completion_timeout(&sg.comp, TIMEOUT)) {
-		err = -ETIMEDOUT;
-cancel:
-		for (i=0; i<3; i++) {
-			usb_kill_urb(sg.urb[i]);
-		}
-	}
-	mutex_unlock(&al->card_mutex);
-
-out:
-	usb_free_urb(sg.urb[0]);
-	usb_free_urb(sg.urb[1]);
-	usb_free_urb(sg.urb[2]);
-	return err;
-}
-
-static int alauda_erase_block(struct mtd_info *mtd, loff_t ofs)
-{
-	struct alauda_sg_request sg;
-	struct alauda *al = mtd->priv;
-	u32 pba = ofs >> al->card->blockshift;
-	u8 command[] = {
-		ALAUDA_BULK_CMD, ALAUDA_BULK_ERASE_BLOCK, PBA_HI(pba),
-		PBA_ZONE(pba), 0, PBA_LO(pba), 0x02, 0, al->port
-	};
-	u8 buf[2];
-	int i, err;
-
-	for (i=0; i<2; i++)
-		sg.urb[i] = NULL;
-
-	err = -ENOMEM;
-	for (i=0; i<2; i++) {
-		sg.urb[i] = usb_alloc_urb(0, GFP_NOIO);
-		if (!sg.urb[i])
-			goto out;
-	}
-	init_completion(&sg.comp);
-	usb_fill_bulk_urb(sg.urb[0], al->dev, al->bulk_out, command, 9,
-			alauda_complete, NULL);
-	usb_fill_bulk_urb(sg.urb[1], al->dev, al->bulk_in, buf, 2,
-			alauda_complete, &sg.comp);
-
-	mutex_lock(&al->card_mutex);
-	for (i=0; i<2; i++) {
-		err = usb_submit_urb(sg.urb[i], GFP_NOIO);
-		if (err)
-			goto cancel;
-	}
-	if (!wait_for_completion_timeout(&sg.comp, TIMEOUT)) {
-		err = -ETIMEDOUT;
-cancel:
-		for (i=0; i<2; i++) {
-			usb_kill_urb(sg.urb[i]);
-		}
-	}
-	mutex_unlock(&al->card_mutex);
-
-out:
-	usb_free_urb(sg.urb[0]);
-	usb_free_urb(sg.urb[1]);
-	return err;
-}
-
-static int alauda_read_oob(struct mtd_info *mtd, loff_t from, void *oob)
-{
-	static u8 ignore_buf[512]; /* write only */
-
-	return __alauda_read_page(mtd, from, ignore_buf, oob);
-}
-
-static int alauda_isbad(struct mtd_info *mtd, loff_t ofs)
-{
-	u8 oob[16];
-	int err;
-
-	err = alauda_read_oob(mtd, ofs, oob);
-	if (err)
-		return err;
-
-	/* A block is marked bad if two or more bits are zero */
-	return hweight8(oob[5]) >= 7 ? 0 : 1;
-}
-
-static int alauda_bounce_read(struct mtd_info *mtd, loff_t from, size_t len,
-		size_t *retlen, u_char *buf)
-{
-	struct alauda *al = mtd->priv;
-	void *bounce_buf;
-	int err, corrected=0, uncorrected=0;
-
-	bounce_buf = kmalloc(mtd->writesize, GFP_KERNEL);
-	if (!bounce_buf)
-		return -ENOMEM;
-
-	*retlen = len;
-	while (len) {
-		u8 oob[16];
-		size_t byte = from & al->bytemask;
-		size_t cplen = min(len, mtd->writesize - byte);
-
-		err = alauda_read_page(mtd, from, bounce_buf, oob,
-				&corrected, &uncorrected);
-		if (err)
-			goto out;
-
-		memcpy(buf, bounce_buf + byte, cplen);
-		buf += cplen;
-		from += cplen;
-		len -= cplen;
-	}
-	err = 0;
-	if (corrected)
-		err = -EUCLEAN;
-	if (uncorrected)
-		err = -EBADMSG;
-out:
-	kfree(bounce_buf);
-	return err;
-}
-
-static int alauda_read(struct mtd_info *mtd, loff_t from, size_t len,
-		size_t *retlen, u_char *buf)
-{
-	struct alauda *al = mtd->priv;
-	int err, corrected=0, uncorrected=0;
-
-	if ((from & al->bytemask) || (len & al->bytemask))
-		return alauda_bounce_read(mtd, from, len, retlen, buf);
-
-	*retlen = len;
-	while (len) {
-		u8 oob[16];
-
-		err = alauda_read_page(mtd, from, buf, oob,
-				&corrected, &uncorrected);
-		if (err)
-			return err;
-
-		buf += mtd->writesize;
-		from += mtd->writesize;
-		len -= mtd->writesize;
-	}
-	err = 0;
-	if (corrected)
-		err = -EUCLEAN;
-	if (uncorrected)
-		err = -EBADMSG;
-	return err;
-}
-
-static int alauda_write(struct mtd_info *mtd, loff_t to, size_t len,
-		size_t *retlen, const u_char *buf)
-{
-	struct alauda *al = mtd->priv;
-	int err;
-
-	if ((to & al->bytemask) || (len & al->bytemask))
-		return -EINVAL;
-
-	*retlen = len;
-	while (len) {
-		u32 page = (to >> al->card->pageshift) & al->pagemask;
-		u8 oob[16] = {	'h', 'e', 'l', 'l', 'o', 0xff, 0xff, 0xff,
-				0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
-
-		/* don't write to bad blocks */
-		if (page == 0) {
-			err = alauda_isbad(mtd, to);
-			if (err) {
-				return -EIO;
-			}
-		}
-		nand_calculate_ecc(mtd, buf, &oob[13]);
-		nand_calculate_ecc(mtd, buf+256, &oob[8]);
-
-		err = alauda_write_page(mtd, to, (void*)buf, oob);
-		if (err)
-			return err;
-
-		buf += mtd->writesize;
-		to += mtd->writesize;
-		len -= mtd->writesize;
-	}
-	return 0;
-}
-
-static int __alauda_erase(struct mtd_info *mtd, struct erase_info *instr)
-{
-	struct alauda *al = mtd->priv;
-	u32 ofs = instr->addr;
-	u32 len = instr->len;
-	int err;
-
-	if ((ofs & al->blockmask) || (len & al->blockmask))
-		return -EINVAL;
-
-	while (len) {
-		/* don't erase bad blocks */
-		err = alauda_isbad(mtd, ofs);
-		if (err > 0)
-			err = -EIO;
-		if (err < 0)
-			return err;
-
-		err = alauda_erase_block(mtd, ofs);
-		if (err < 0)
-			return err;
-
-		ofs += mtd->erasesize;
-		len -= mtd->erasesize;
-	}
-	return 0;
-}
-
-static int alauda_erase(struct mtd_info *mtd, struct erase_info *instr)
-{
-	int err;
-
-	err = __alauda_erase(mtd, instr);
-	instr->state = err ? MTD_ERASE_FAILED : MTD_ERASE_DONE;
-	mtd_erase_callback(instr);
-	return err;
-}
-
-static int alauda_init_media(struct alauda *al)
-{
-	u8 buf[4], *b0=buf, *b1=buf+1;
-	struct alauda_card *card;
-	struct mtd_info *mtd;
-	int err;
-
-	mtd = kzalloc(sizeof(*mtd), GFP_KERNEL);
-	if (!mtd)
-		return -ENOMEM;
-
-	for (;;) {
-		err = alauda_get_media_status(al, buf);
-		if (err < 0)
-			goto error;
-		if (*b0 & 0x10)
-			break;
-		msleep(20);
-	}
-
-	err = alauda_ack_media(al);
-	if (err)
-		goto error;
-
-	msleep(10);
-
-	err = alauda_get_media_status(al, buf);
-	if (err < 0)
-		goto error;
-
-	if (*b0 != 0x14) {
-		/* media not ready */
-		err = -EIO;
-		goto error;
-	}
-	err = alauda_get_media_signatures(al, buf);
-	if (err < 0)
-		goto error;
-
-	card = get_card(*b1);
-	if (!card) {
-		printk(KERN_ERR"Alauda: unknown card id %02x\n", *b1);
-		err = -EIO;
-		goto error;
-	}
-	printk(KERN_INFO"pagesize=%x\nerasesize=%x\nsize=%xMiB\n",
-			1<<card->pageshift, 1<<card->blockshift,
-			1<<(card->chipshift-20));
-	al->card = card;
-	al->pagemask = (1 << (card->blockshift - card->pageshift)) - 1;
-	al->bytemask = (1 << card->pageshift) - 1;
-	al->blockmask = (1 << card->blockshift) - 1;
-
-	mtd->name = "alauda";
-	mtd->size = 1<<card->chipshift;
-	mtd->erasesize = 1<<card->blockshift;
-	mtd->writesize = 1<<card->pageshift;
-	mtd->type = MTD_NANDFLASH;
-	mtd->flags = MTD_CAP_NANDFLASH;
-	mtd->read = alauda_read;
-	mtd->write = alauda_write;
-	mtd->erase = alauda_erase;
-	mtd->block_isbad = alauda_isbad;
-	mtd->priv = al;
-	mtd->owner = THIS_MODULE;
-
-	err = add_mtd_device(mtd);
-	if (err) {
-		err = -ENFILE;
-		goto error;
-	}
-
-	al->mtd = mtd;
-	alauda_reset(al); /* no clue whether this is necessary */
-	return 0;
-error:
-	kfree(mtd);
-	return err;
-}
-
-static int alauda_check_media(struct alauda *al)
-{
-	u8 buf[2], *b0 = buf, *b1 = buf+1;
-	int err;
-
-	err = alauda_get_media_status(al, buf);
-	if (err < 0)
-		return err;
-
-	if ((*b1 & 0x01) == 0) {
-		/* door open */
-		return -EIO;
-	}
-	if ((*b0 & 0x80) || ((*b0 & 0x1F) == 0x10)) {
-		/* no media ? */
-		return -EIO;
-	}
-	if (*b0 & 0x08) {
-		/* media change ? */
-		return alauda_init_media(al);
-	}
-	return 0;
-}
-
-static int alauda_probe(struct usb_interface *interface,
-		const struct usb_device_id *id)
-{
-	struct alauda *al;
-	struct usb_host_interface *iface;
-	struct usb_endpoint_descriptor *ep,
-			*ep_in=NULL, *ep_out=NULL, *ep_wr=NULL;
-	int i, err = -ENOMEM;
-
-	al = kzalloc(2*sizeof(*al), GFP_KERNEL);
-	if (!al)
-		goto error;
-
-	kref_init(&al->kref);
-	usb_set_intfdata(interface, al);
-
-	al->dev = usb_get_dev(interface_to_usbdev(interface));
-	al->interface = interface;
-
-	iface = interface->cur_altsetting;
-	for (i = 0; i < iface->desc.bNumEndpoints; ++i) {
-		ep = &iface->endpoint[i].desc;
-
-		if (usb_endpoint_is_bulk_in(ep)) {
-			ep_in = ep;
-		} else if (usb_endpoint_is_bulk_out(ep)) {
-			if (i==0)
-				ep_wr = ep;
-			else
-				ep_out = ep;
-		}
-	}
-	err = -EIO;
-	if (!ep_wr || !ep_in || !ep_out)
-		goto error;
-
-	al->write_out = usb_sndbulkpipe(al->dev,
-			usb_endpoint_num(ep_wr));
-	al->bulk_in = usb_rcvbulkpipe(al->dev,
-			usb_endpoint_num(ep_in));
-	al->bulk_out = usb_sndbulkpipe(al->dev,
-			usb_endpoint_num(ep_out));
-
-	/* second device is identical up to now */
-	memcpy(al+1, al, sizeof(*al));
-
-	mutex_init(&al[0].card_mutex);
-	mutex_init(&al[1].card_mutex);
-
-	al[0].port = ALAUDA_PORT_XD;
-	al[1].port = ALAUDA_PORT_SM;
-
-	dev_info(&interface->dev, "alauda probed\n");
-	alauda_check_media(al);
-	alauda_check_media(al+1);
-
-	return 0;
-
-error:
-	if (al)
-		kref_put(&al->kref, alauda_delete);
-	return err;
-}
-
-static void alauda_disconnect(struct usb_interface *interface)
-{
-	struct alauda *al;
-
-	al = usb_get_intfdata(interface);
-	usb_set_intfdata(interface, NULL);
-
-	/* FIXME: prevent more I/O from starting */
-
-	/* decrement our usage count */
-	if (al)
-		kref_put(&al->kref, alauda_delete);
-
-	dev_info(&interface->dev, "alauda gone");
-}
-
-static struct usb_driver alauda_driver = {
-	.name =		"alauda",
-	.probe =	alauda_probe,
-	.disconnect =	alauda_disconnect,
-	.id_table =	alauda_table,
-};
-
-static int __init alauda_init(void)
-{
-	return usb_register(&alauda_driver);
-}
-
-static void __exit alauda_exit(void)
-{
-	usb_deregister(&alauda_driver);
-}
-
-module_init(alauda_init);
-module_exit(alauda_exit);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index 2548e1065bf..4936e9e0002 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -4,6 +4,8 @@
  *  Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
  *
  *  Derived from drivers/mtd/toto.c
+ *  Converted to platform driver by Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
+ *  Partially stolen from drivers/mtd/nand/plat_nand.c
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -15,25 +17,26 @@
  */
 
 #include <linux/slab.h>
-#include <linux/init.h>
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
+
 #include <asm/io.h>
-#include <mach/hardware.h>
 #include <asm/sizes.h>
-#include <mach/gpio.h>
-#include <plat/board-ams-delta.h>
+
+#include <mach/board-ams-delta.h>
+
+#include <mach/hardware.h>
 
 /*
  * MTD structure for E3 (Delta)
  */
 static struct mtd_info *ams_delta_mtd = NULL;
 
-#define NAND_MASK (AMS_DELTA_LATCH2_NAND_NRE | AMS_DELTA_LATCH2_NAND_NWE | AMS_DELTA_LATCH2_NAND_CLE | AMS_DELTA_LATCH2_NAND_ALE | AMS_DELTA_LATCH2_NAND_NCE | AMS_DELTA_LATCH2_NAND_NWP)
-
 /*
  * Define partitions for flash devices
  */
@@ -62,26 +65,26 @@ static struct mtd_partition partition_info[] = {
 static void ams_delta_write_byte(struct mtd_info *mtd, u_char byte)
 {
 	struct nand_chip *this = mtd->priv;
+	void __iomem *io_base = this->priv;
 
-	omap_writew(0, (OMAP1_MPUIO_BASE + OMAP_MPUIO_IO_CNTL));
-	omap_writew(byte, this->IO_ADDR_W);
-	ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NWE, 0);
+	writew(0, io_base + OMAP_MPUIO_IO_CNTL);
+	writew(byte, this->IO_ADDR_W);
+	gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NWE, 0);
 	ndelay(40);
-	ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NWE,
-			       AMS_DELTA_LATCH2_NAND_NWE);
+	gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NWE, 1);
 }
 
 static u_char ams_delta_read_byte(struct mtd_info *mtd)
 {
 	u_char res;
 	struct nand_chip *this = mtd->priv;
+	void __iomem *io_base = this->priv;
 
-	ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NRE, 0);
+	gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NRE, 0);
 	ndelay(40);
-	omap_writew(~0, (OMAP1_MPUIO_BASE + OMAP_MPUIO_IO_CNTL));
-	res = omap_readw(this->IO_ADDR_R);
-	ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NRE,
-			       AMS_DELTA_LATCH2_NAND_NRE);
+	writew(~0, io_base + OMAP_MPUIO_IO_CNTL);
+	res = readw(this->IO_ADDR_R);
+	gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NRE, 1);
 
 	return res;
 }
@@ -103,18 +106,6 @@ static void ams_delta_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 		buf[i] = ams_delta_read_byte(mtd);
 }
 
-static int ams_delta_verify_buf(struct mtd_info *mtd, const u_char *buf,
-				int len)
-{
-	int i;
-
-	for (i=0; i<len; i++)
-		if (buf[i] != ams_delta_read_byte(mtd))
-			return -EFAULT;
-
-	return 0;
-}
-
 /*
  * Command control function
  *
@@ -128,15 +119,12 @@ static void ams_delta_hwcontrol(struct mtd_info *mtd, int cmd,
 {
 
 	if (ctrl & NAND_CTRL_CHANGE) {
-		unsigned long bits;
-
-		bits = (~ctrl & NAND_NCE) ? AMS_DELTA_LATCH2_NAND_NCE : 0;
-		bits |= (ctrl & NAND_CLE) ? AMS_DELTA_LATCH2_NAND_CLE : 0;
-		bits |= (ctrl & NAND_ALE) ? AMS_DELTA_LATCH2_NAND_ALE : 0;
-
-		ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_CLE |
-				AMS_DELTA_LATCH2_NAND_ALE |
-				AMS_DELTA_LATCH2_NAND_NCE, bits);
+		gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NCE,
+				(ctrl & NAND_NCE) == 0);
+		gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_CLE,
+				(ctrl & NAND_CLE) != 0);
+		gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_ALE,
+				(ctrl & NAND_ALE) != 0);
 	}
 
 	if (cmd != NAND_CMD_NONE)
@@ -148,14 +136,52 @@ static int ams_delta_nand_ready(struct mtd_info *mtd)
 	return gpio_get_value(AMS_DELTA_GPIO_PIN_NAND_RB);
 }
 
+static const struct gpio _mandatory_gpio[] = {
+	{
+		.gpio	= AMS_DELTA_GPIO_PIN_NAND_NCE,
+		.flags	= GPIOF_OUT_INIT_HIGH,
+		.label	= "nand_nce",
+	},
+	{
+		.gpio	= AMS_DELTA_GPIO_PIN_NAND_NRE,
+		.flags	= GPIOF_OUT_INIT_HIGH,
+		.label	= "nand_nre",
+	},
+	{
+		.gpio	= AMS_DELTA_GPIO_PIN_NAND_NWP,
+		.flags	= GPIOF_OUT_INIT_HIGH,
+		.label	= "nand_nwp",
+	},
+	{
+		.gpio	= AMS_DELTA_GPIO_PIN_NAND_NWE,
+		.flags	= GPIOF_OUT_INIT_HIGH,
+		.label	= "nand_nwe",
+	},
+	{
+		.gpio	= AMS_DELTA_GPIO_PIN_NAND_ALE,
+		.flags	= GPIOF_OUT_INIT_LOW,
+		.label	= "nand_ale",
+	},
+	{
+		.gpio	= AMS_DELTA_GPIO_PIN_NAND_CLE,
+		.flags	= GPIOF_OUT_INIT_LOW,
+		.label	= "nand_cle",
+	},
+};
+
 /*
  * Main initialization routine
  */
-static int __init ams_delta_init(void)
+static int ams_delta_init(struct platform_device *pdev)
 {
 	struct nand_chip *this;
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	void __iomem *io_base;
 	int err = 0;
 
+	if (!res)
+		return -ENXIO;
+
 	/* Allocate memory for MTD device structure and private data */
 	ams_delta_mtd = kmalloc(sizeof(struct mtd_info) +
 				sizeof(struct nand_chip), GFP_KERNEL);
@@ -177,13 +203,27 @@ static int __init ams_delta_init(void)
 	/* Link the private data with the MTD structure */
 	ams_delta_mtd->priv = this;
 
+	/*
+	 * Don't try to request the memory region from here,
+	 * it should have been already requested from the
+	 * gpio-omap driver and requesting it again would fail.
+	 */
+
+	io_base = ioremap(res->start, resource_size(res));
+	if (io_base == NULL) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		err = -EIO;
+		goto out_free;
+	}
+
+	this->priv = io_base;
+
 	/* Set address of NAND IO lines */
-	this->IO_ADDR_R = (OMAP1_MPUIO_BASE + OMAP_MPUIO_INPUT_LATCH);
-	this->IO_ADDR_W = (OMAP1_MPUIO_BASE + OMAP_MPUIO_OUTPUT);
+	this->IO_ADDR_R = io_base + OMAP_MPUIO_INPUT_LATCH;
+	this->IO_ADDR_W = io_base + OMAP_MPUIO_OUTPUT;
 	this->read_byte = ams_delta_read_byte;
 	this->write_buf = ams_delta_write_buf;
 	this->read_buf = ams_delta_read_buf;
-	this->verify_buf = ams_delta_verify_buf;
 	this->cmd_ctrl = ams_delta_hwcontrol;
 	if (gpio_request(AMS_DELTA_GPIO_PIN_NAND_RB, "nand_rdy") == 0) {
 		this->dev_ready = ams_delta_nand_ready;
@@ -195,44 +235,66 @@ static int __init ams_delta_init(void)
 	this->chip_delay = 30;
 	this->ecc.mode = NAND_ECC_SOFT;
 
+	platform_set_drvdata(pdev, io_base);
+
 	/* Set chip enabled, but  */
-	ams_delta_latch2_write(NAND_MASK, AMS_DELTA_LATCH2_NAND_NRE |
-					  AMS_DELTA_LATCH2_NAND_NWE |
-					  AMS_DELTA_LATCH2_NAND_NCE |
-					  AMS_DELTA_LATCH2_NAND_NWP);
+	err = gpio_request_array(_mandatory_gpio, ARRAY_SIZE(_mandatory_gpio));
+	if (err)
+		goto out_gpio;
 
-	/* Scan to find existance of the device */
+	/* Scan to find existence of the device */
 	if (nand_scan(ams_delta_mtd, 1)) {
 		err = -ENXIO;
 		goto out_mtd;
 	}
 
 	/* Register the partitions */
-	add_mtd_partitions(ams_delta_mtd, partition_info,
-			   ARRAY_SIZE(partition_info));
+	mtd_device_register(ams_delta_mtd, partition_info,
+			    ARRAY_SIZE(partition_info));
 
 	goto out;
 
  out_mtd:
+	gpio_free_array(_mandatory_gpio, ARRAY_SIZE(_mandatory_gpio));
+out_gpio:
+	gpio_free(AMS_DELTA_GPIO_PIN_NAND_RB);
+	iounmap(io_base);
+out_free:
 	kfree(ams_delta_mtd);
  out:
 	return err;
 }
 
-module_init(ams_delta_init);
-
 /*
  * Clean up routine
  */
-static void __exit ams_delta_cleanup(void)
+static int ams_delta_cleanup(struct platform_device *pdev)
 {
+	void __iomem *io_base = platform_get_drvdata(pdev);
+
 	/* Release resources, unregister device */
 	nand_release(ams_delta_mtd);
 
+	gpio_free_array(_mandatory_gpio, ARRAY_SIZE(_mandatory_gpio));
+	gpio_free(AMS_DELTA_GPIO_PIN_NAND_RB);
+	iounmap(io_base);
+
 	/* Free the MTD device structure */
 	kfree(ams_delta_mtd);
+
+	return 0;
 }
-module_exit(ams_delta_cleanup);
+
+static struct platform_driver ams_delta_nand_driver = {
+	.probe		= ams_delta_init,
+	.remove		= ams_delta_cleanup,
+	.driver		= {
+		.name	= "ams-delta-nand",
+		.owner	= THIS_MODULE,
+	},
+};
+
+module_platform_driver(ams_delta_nand_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Jonathan McDowell <noodles@earth.li>");
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 04d30887ca7..4ce181a35bc 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -1,20 +1,25 @@
 /*
- *  Copyright (C) 2003 Rick Bronson
+ *  Copyright © 2003 Rick Bronson
  *
  *  Derived from drivers/mtd/nand/autcpu12.c
- *	 Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
+ *	 Copyright © 2001 Thomas Gleixner (gleixner@autronix.de)
  *
  *  Derived from drivers/mtd/spia.c
- *	 Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com)
+ *	 Copyright © 2000 Steven J. Hill (sjhill@cotw.com)
  *
  *
  *  Add Hardware ECC support for AT91SAM9260 / AT91SAM9263
- *     Richard Genoud (richard.genoud@gmail.com), Adeneo Copyright (C) 2007
+ *     Richard Genoud (richard.genoud@gmail.com), Adeneo Copyright © 2007
  *
  *     Derived from Das U-Boot source code
  *     		(u-boot-1.1.5/board/atmel/at91sam9263ek/nand.c)
- *     (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
+ *     © Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
  *
+ *  Add Programmable Multibit ECC support for various AT91 SoC
+ *     © Copyright 2012 ATMEL, Hong Xu
+ *
+ *  Add Nand Flash Controller support for SAMA5 SoC
+ *     © Copyright 2013 ATMEL, Josh Wu (josh.wu@atmel.com)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -22,31 +27,28 @@
  *
  */
 
+#include <linux/dma-mapping.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/of_mtd.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
 #include <linux/gpio.h>
+#include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/platform_data/atmel.h>
 
-#include <mach/board.h>
-#include <mach/cpu.h>
-
-#ifdef CONFIG_MTD_NAND_ATMEL_ECC_HW
-#define hard_ecc	1
-#else
-#define hard_ecc	0
-#endif
-
-#ifdef CONFIG_MTD_NAND_ATMEL_ECC_NONE
-#define no_ecc		1
-#else
-#define no_ecc		0
-#endif
+static int use_dma = 1;
+module_param(use_dma, int, 0);
 
 static int on_flash_bbt = 0;
 module_param(on_flash_bbt, int, 0);
@@ -58,6 +60,7 @@ module_param(on_flash_bbt, int, 0);
 	__raw_writel((value), add + ATMEL_ECC_##reg)
 
 #include "atmel_nand_ecc.h"	/* Hardware ECC registers */
+#include "atmel_nand_nfc.h"	/* Nand Flash Controller definition */
 
 /* oob layout for large page size
  * bad block info is on bytes 0 and 1
@@ -85,22 +88,75 @@ static struct nand_ecclayout atmel_oobinfo_small = {
 	},
 };
 
+struct atmel_nfc {
+	void __iomem		*base_cmd_regs;
+	void __iomem		*hsmc_regs;
+	void __iomem		*sram_bank0;
+	dma_addr_t		sram_bank0_phys;
+	bool			use_nfc_sram;
+	bool			write_by_sram;
+
+	bool			is_initialized;
+	struct completion	comp_nfc;
+
+	/* Point to the sram bank which include readed data via NFC */
+	void __iomem		*data_in_sram;
+	bool			will_write_sram;
+};
+static struct atmel_nfc	nand_nfc;
+
 struct atmel_nand_host {
 	struct nand_chip	nand_chip;
 	struct mtd_info		mtd;
 	void __iomem		*io_base;
-	struct atmel_nand_data	*board;
+	dma_addr_t		io_phys;
+	struct atmel_nand_data	board;
 	struct device		*dev;
 	void __iomem		*ecc;
+
+	struct completion	comp;
+	struct dma_chan		*dma_chan;
+
+	struct atmel_nfc	*nfc;
+
+	bool			has_pmecc;
+	u8			pmecc_corr_cap;
+	u16			pmecc_sector_size;
+	u32			pmecc_lookup_table_offset;
+	u32			pmecc_lookup_table_offset_512;
+	u32			pmecc_lookup_table_offset_1024;
+
+	int			pmecc_bytes_per_sector;
+	int			pmecc_sector_number;
+	int			pmecc_degree;	/* Degree of remainders */
+	int			pmecc_cw_len;	/* Length of codeword */
+
+	void __iomem		*pmerrloc_base;
+	void __iomem		*pmecc_rom_base;
+
+	/* lookup table for alpha_to and index_of */
+	void __iomem		*pmecc_alpha_to;
+	void __iomem		*pmecc_index_of;
+
+	/* data for pmecc computation */
+	int16_t			*pmecc_partial_syn;
+	int16_t			*pmecc_si;
+	int16_t			*pmecc_smu;	/* Sigma table */
+	int16_t			*pmecc_lmu;	/* polynomal order */
+	int			*pmecc_mu;
+	int			*pmecc_dmu;
+	int			*pmecc_delta;
 };
 
+static struct nand_ecclayout atmel_pmecc_oobinfo;
+
 /*
  * Enable NAND.
  */
 static void atmel_nand_enable(struct atmel_nand_host *host)
 {
-	if (host->board->enable_pin)
-		gpio_set_value(host->board->enable_pin, 0);
+	if (gpio_is_valid(host->board.enable_pin))
+		gpio_set_value(host->board.enable_pin, 0);
 }
 
 /*
@@ -108,8 +164,8 @@ static void atmel_nand_enable(struct atmel_nand_host *host)
  */
 static void atmel_nand_disable(struct atmel_nand_host *host)
 {
-	if (host->board->enable_pin)
-		gpio_set_value(host->board->enable_pin, 1);
+	if (gpio_is_valid(host->board.enable_pin))
+		gpio_set_value(host->board.enable_pin, 1);
 }
 
 /*
@@ -130,9 +186,9 @@ static void atmel_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl
 		return;
 
 	if (ctrl & NAND_CLE)
-		writeb(cmd, host->io_base + (1 << host->board->cle));
+		writeb(cmd, host->io_base + (1 << host->board.cle));
 	else
-		writeb(cmd, host->io_base + (1 << host->board->ale));
+		writeb(cmd, host->io_base + (1 << host->board.ale));
 }
 
 /*
@@ -143,28 +199,110 @@ static int atmel_nand_device_ready(struct mtd_info *mtd)
 	struct nand_chip *nand_chip = mtd->priv;
 	struct atmel_nand_host *host = nand_chip->priv;
 
-	return gpio_get_value(host->board->rdy_pin) ^
-                !!host->board->rdy_pin_active_low;
+	return gpio_get_value(host->board.rdy_pin) ^
+                !!host->board.rdy_pin_active_low;
+}
+
+/* Set up for hardware ready pin and enable pin. */
+static int atmel_nand_set_enable_ready_pins(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct atmel_nand_host *host = chip->priv;
+	int res = 0;
+
+	if (gpio_is_valid(host->board.rdy_pin)) {
+		res = devm_gpio_request(host->dev,
+				host->board.rdy_pin, "nand_rdy");
+		if (res < 0) {
+			dev_err(host->dev,
+				"can't request rdy gpio %d\n",
+				host->board.rdy_pin);
+			return res;
+		}
+
+		res = gpio_direction_input(host->board.rdy_pin);
+		if (res < 0) {
+			dev_err(host->dev,
+				"can't request input direction rdy gpio %d\n",
+				host->board.rdy_pin);
+			return res;
+		}
+
+		chip->dev_ready = atmel_nand_device_ready;
+	}
+
+	if (gpio_is_valid(host->board.enable_pin)) {
+		res = devm_gpio_request(host->dev,
+				host->board.enable_pin, "nand_enable");
+		if (res < 0) {
+			dev_err(host->dev,
+				"can't request enable gpio %d\n",
+				host->board.enable_pin);
+			return res;
+		}
+
+		res = gpio_direction_output(host->board.enable_pin, 1);
+		if (res < 0) {
+			dev_err(host->dev,
+				"can't request output direction enable gpio %d\n",
+				host->board.enable_pin);
+			return res;
+		}
+	}
+
+	return res;
+}
+
+static void memcpy32_fromio(void *trg, const void __iomem  *src, size_t size)
+{
+	int i;
+	u32 *t = trg;
+	const __iomem u32 *s = src;
+
+	for (i = 0; i < (size >> 2); i++)
+		*t++ = readl_relaxed(s++);
+}
+
+static void memcpy32_toio(void __iomem *trg, const void *src, int size)
+{
+	int i;
+	u32 __iomem *t = trg;
+	const u32 *s = src;
+
+	for (i = 0; i < (size >> 2); i++)
+		writel_relaxed(*s++, t++);
 }
 
 /*
  * Minimal-overhead PIO for data access.
  */
-static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
+static void atmel_read_buf8(struct mtd_info *mtd, u8 *buf, int len)
 {
 	struct nand_chip	*nand_chip = mtd->priv;
+	struct atmel_nand_host *host = nand_chip->priv;
 
-	__raw_readsb(nand_chip->IO_ADDR_R, buf, len);
+	if (host->nfc && host->nfc->use_nfc_sram && host->nfc->data_in_sram) {
+		memcpy32_fromio(buf, host->nfc->data_in_sram, len);
+		host->nfc->data_in_sram += len;
+	} else {
+		__raw_readsb(nand_chip->IO_ADDR_R, buf, len);
+	}
 }
 
 static void atmel_read_buf16(struct mtd_info *mtd, u8 *buf, int len)
 {
 	struct nand_chip	*nand_chip = mtd->priv;
+	struct atmel_nand_host *host = nand_chip->priv;
 
-	__raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2);
+	if (host->nfc && host->nfc->use_nfc_sram && host->nfc->data_in_sram) {
+		memcpy32_fromio(buf, host->nfc->data_in_sram, len);
+		host->nfc->data_in_sram += len;
+	} else {
+		__raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2);
+	}
 }
 
-static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
+static void atmel_write_buf8(struct mtd_info *mtd, const u8 *buf, int len)
 {
 	struct nand_chip	*nand_chip = mtd->priv;
 
@@ -178,6 +316,922 @@ static void atmel_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
 	__raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2);
 }
 
+static void dma_complete_func(void *completion)
+{
+	complete(completion);
+}
+
+static int nfc_set_sram_bank(struct atmel_nand_host *host, unsigned int bank)
+{
+	/* NFC only has two banks. Must be 0 or 1 */
+	if (bank > 1)
+		return -EINVAL;
+
+	if (bank) {
+		/* Only for a 2k-page or lower flash, NFC can handle 2 banks */
+		if (host->mtd.writesize > 2048)
+			return -EINVAL;
+		nfc_writel(host->nfc->hsmc_regs, BANK, ATMEL_HSMC_NFC_BANK1);
+	} else {
+		nfc_writel(host->nfc->hsmc_regs, BANK, ATMEL_HSMC_NFC_BANK0);
+	}
+
+	return 0;
+}
+
+static uint nfc_get_sram_off(struct atmel_nand_host *host)
+{
+	if (nfc_readl(host->nfc->hsmc_regs, BANK) & ATMEL_HSMC_NFC_BANK1)
+		return NFC_SRAM_BANK1_OFFSET;
+	else
+		return 0;
+}
+
+static dma_addr_t nfc_sram_phys(struct atmel_nand_host *host)
+{
+	if (nfc_readl(host->nfc->hsmc_regs, BANK) & ATMEL_HSMC_NFC_BANK1)
+		return host->nfc->sram_bank0_phys + NFC_SRAM_BANK1_OFFSET;
+	else
+		return host->nfc->sram_bank0_phys;
+}
+
+static int atmel_nand_dma_op(struct mtd_info *mtd, void *buf, int len,
+			       int is_read)
+{
+	struct dma_device *dma_dev;
+	enum dma_ctrl_flags flags;
+	dma_addr_t dma_src_addr, dma_dst_addr, phys_addr;
+	struct dma_async_tx_descriptor *tx = NULL;
+	dma_cookie_t cookie;
+	struct nand_chip *chip = mtd->priv;
+	struct atmel_nand_host *host = chip->priv;
+	void *p = buf;
+	int err = -EIO;
+	enum dma_data_direction dir = is_read ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+	struct atmel_nfc *nfc = host->nfc;
+
+	if (buf >= high_memory)
+		goto err_buf;
+
+	dma_dev = host->dma_chan->device;
+
+	flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
+
+	phys_addr = dma_map_single(dma_dev->dev, p, len, dir);
+	if (dma_mapping_error(dma_dev->dev, phys_addr)) {
+		dev_err(host->dev, "Failed to dma_map_single\n");
+		goto err_buf;
+	}
+
+	if (is_read) {
+		if (nfc && nfc->data_in_sram)
+			dma_src_addr = nfc_sram_phys(host) + (nfc->data_in_sram
+				- (nfc->sram_bank0 + nfc_get_sram_off(host)));
+		else
+			dma_src_addr = host->io_phys;
+
+		dma_dst_addr = phys_addr;
+	} else {
+		dma_src_addr = phys_addr;
+
+		if (nfc && nfc->write_by_sram)
+			dma_dst_addr = nfc_sram_phys(host);
+		else
+			dma_dst_addr = host->io_phys;
+	}
+
+	tx = dma_dev->device_prep_dma_memcpy(host->dma_chan, dma_dst_addr,
+					     dma_src_addr, len, flags);
+	if (!tx) {
+		dev_err(host->dev, "Failed to prepare DMA memcpy\n");
+		goto err_dma;
+	}
+
+	init_completion(&host->comp);
+	tx->callback = dma_complete_func;
+	tx->callback_param = &host->comp;
+
+	cookie = tx->tx_submit(tx);
+	if (dma_submit_error(cookie)) {
+		dev_err(host->dev, "Failed to do DMA tx_submit\n");
+		goto err_dma;
+	}
+
+	dma_async_issue_pending(host->dma_chan);
+	wait_for_completion(&host->comp);
+
+	if (is_read && nfc && nfc->data_in_sram)
+		/* After read data from SRAM, need to increase the position */
+		nfc->data_in_sram += len;
+
+	err = 0;
+
+err_dma:
+	dma_unmap_single(dma_dev->dev, phys_addr, len, dir);
+err_buf:
+	if (err != 0)
+		dev_dbg(host->dev, "Fall back to CPU I/O\n");
+	return err;
+}
+
+static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct atmel_nand_host *host = chip->priv;
+
+	if (use_dma && len > mtd->oobsize)
+		/* only use DMA for bigger than oob size: better performances */
+		if (atmel_nand_dma_op(mtd, buf, len, 1) == 0)
+			return;
+
+	if (host->board.bus_width_16)
+		atmel_read_buf16(mtd, buf, len);
+	else
+		atmel_read_buf8(mtd, buf, len);
+}
+
+static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct atmel_nand_host *host = chip->priv;
+
+	if (use_dma && len > mtd->oobsize)
+		/* only use DMA for bigger than oob size: better performances */
+		if (atmel_nand_dma_op(mtd, (void *)buf, len, 0) == 0)
+			return;
+
+	if (host->board.bus_width_16)
+		atmel_write_buf16(mtd, buf, len);
+	else
+		atmel_write_buf8(mtd, buf, len);
+}
+
+/*
+ * Return number of ecc bytes per sector according to sector size and
+ * correction capability
+ *
+ * Following table shows what at91 PMECC supported:
+ * Correction Capability	Sector_512_bytes	Sector_1024_bytes
+ * =====================	================	=================
+ *                2-bits                 4-bytes                  4-bytes
+ *                4-bits                 7-bytes                  7-bytes
+ *                8-bits                13-bytes                 14-bytes
+ *               12-bits                20-bytes                 21-bytes
+ *               24-bits                39-bytes                 42-bytes
+ */
+static int pmecc_get_ecc_bytes(int cap, int sector_size)
+{
+	int m = 12 + sector_size / 512;
+	return (m * cap + 7) / 8;
+}
+
+static void pmecc_config_ecc_layout(struct nand_ecclayout *layout,
+				    int oobsize, int ecc_len)
+{
+	int i;
+
+	layout->eccbytes = ecc_len;
+
+	/* ECC will occupy the last ecc_len bytes continuously */
+	for (i = 0; i < ecc_len; i++)
+		layout->eccpos[i] = oobsize - ecc_len + i;
+
+	layout->oobfree[0].offset = 2;
+	layout->oobfree[0].length =
+		oobsize - ecc_len - layout->oobfree[0].offset;
+}
+
+static void __iomem *pmecc_get_alpha_to(struct atmel_nand_host *host)
+{
+	int table_size;
+
+	table_size = host->pmecc_sector_size == 512 ?
+		PMECC_LOOKUP_TABLE_SIZE_512 : PMECC_LOOKUP_TABLE_SIZE_1024;
+
+	return host->pmecc_rom_base + host->pmecc_lookup_table_offset +
+			table_size * sizeof(int16_t);
+}
+
+static int pmecc_data_alloc(struct atmel_nand_host *host)
+{
+	const int cap = host->pmecc_corr_cap;
+	int size;
+
+	size = (2 * cap + 1) * sizeof(int16_t);
+	host->pmecc_partial_syn = devm_kzalloc(host->dev, size, GFP_KERNEL);
+	host->pmecc_si = devm_kzalloc(host->dev, size, GFP_KERNEL);
+	host->pmecc_lmu = devm_kzalloc(host->dev,
+			(cap + 1) * sizeof(int16_t), GFP_KERNEL);
+	host->pmecc_smu = devm_kzalloc(host->dev,
+			(cap + 2) * size, GFP_KERNEL);
+
+	size = (cap + 1) * sizeof(int);
+	host->pmecc_mu = devm_kzalloc(host->dev, size, GFP_KERNEL);
+	host->pmecc_dmu = devm_kzalloc(host->dev, size, GFP_KERNEL);
+	host->pmecc_delta = devm_kzalloc(host->dev, size, GFP_KERNEL);
+
+	if (!host->pmecc_partial_syn ||
+		!host->pmecc_si ||
+		!host->pmecc_lmu ||
+		!host->pmecc_smu ||
+		!host->pmecc_mu ||
+		!host->pmecc_dmu ||
+		!host->pmecc_delta)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static void pmecc_gen_syndrome(struct mtd_info *mtd, int sector)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct atmel_nand_host *host = nand_chip->priv;
+	int i;
+	uint32_t value;
+
+	/* Fill odd syndromes */
+	for (i = 0; i < host->pmecc_corr_cap; i++) {
+		value = pmecc_readl_rem_relaxed(host->ecc, sector, i / 2);
+		if (i & 1)
+			value >>= 16;
+		value &= 0xffff;
+		host->pmecc_partial_syn[(2 * i) + 1] = (int16_t)value;
+	}
+}
+
+static void pmecc_substitute(struct mtd_info *mtd)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct atmel_nand_host *host = nand_chip->priv;
+	int16_t __iomem *alpha_to = host->pmecc_alpha_to;
+	int16_t __iomem *index_of = host->pmecc_index_of;
+	int16_t *partial_syn = host->pmecc_partial_syn;
+	const int cap = host->pmecc_corr_cap;
+	int16_t *si;
+	int i, j;
+
+	/* si[] is a table that holds the current syndrome value,
+	 * an element of that table belongs to the field
+	 */
+	si = host->pmecc_si;
+
+	memset(&si[1], 0, sizeof(int16_t) * (2 * cap - 1));
+
+	/* Computation 2t syndromes based on S(x) */
+	/* Odd syndromes */
+	for (i = 1; i < 2 * cap; i += 2) {
+		for (j = 0; j < host->pmecc_degree; j++) {
+			if (partial_syn[i] & ((unsigned short)0x1 << j))
+				si[i] = readw_relaxed(alpha_to + i * j) ^ si[i];
+		}
+	}
+	/* Even syndrome = (Odd syndrome) ** 2 */
+	for (i = 2, j = 1; j <= cap; i = ++j << 1) {
+		if (si[j] == 0) {
+			si[i] = 0;
+		} else {
+			int16_t tmp;
+
+			tmp = readw_relaxed(index_of + si[j]);
+			tmp = (tmp * 2) % host->pmecc_cw_len;
+			si[i] = readw_relaxed(alpha_to + tmp);
+		}
+	}
+
+	return;
+}
+
+static void pmecc_get_sigma(struct mtd_info *mtd)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct atmel_nand_host *host = nand_chip->priv;
+
+	int16_t *lmu = host->pmecc_lmu;
+	int16_t *si = host->pmecc_si;
+	int *mu = host->pmecc_mu;
+	int *dmu = host->pmecc_dmu;	/* Discrepancy */
+	int *delta = host->pmecc_delta; /* Delta order */
+	int cw_len = host->pmecc_cw_len;
+	const int16_t cap = host->pmecc_corr_cap;
+	const int num = 2 * cap + 1;
+	int16_t __iomem	*index_of = host->pmecc_index_of;
+	int16_t __iomem	*alpha_to = host->pmecc_alpha_to;
+	int i, j, k;
+	uint32_t dmu_0_count, tmp;
+	int16_t *smu = host->pmecc_smu;
+
+	/* index of largest delta */
+	int ro;
+	int largest;
+	int diff;
+
+	dmu_0_count = 0;
+
+	/* First Row */
+
+	/* Mu */
+	mu[0] = -1;
+
+	memset(smu, 0, sizeof(int16_t) * num);
+	smu[0] = 1;
+
+	/* discrepancy set to 1 */
+	dmu[0] = 1;
+	/* polynom order set to 0 */
+	lmu[0] = 0;
+	delta[0] = (mu[0] * 2 - lmu[0]) >> 1;
+
+	/* Second Row */
+
+	/* Mu */
+	mu[1] = 0;
+	/* Sigma(x) set to 1 */
+	memset(&smu[num], 0, sizeof(int16_t) * num);
+	smu[num] = 1;
+
+	/* discrepancy set to S1 */
+	dmu[1] = si[1];
+
+	/* polynom order set to 0 */
+	lmu[1] = 0;
+
+	delta[1] = (mu[1] * 2 - lmu[1]) >> 1;
+
+	/* Init the Sigma(x) last row */
+	memset(&smu[(cap + 1) * num], 0, sizeof(int16_t) * num);
+
+	for (i = 1; i <= cap; i++) {
+		mu[i + 1] = i << 1;
+		/* Begin Computing Sigma (Mu+1) and L(mu) */
+		/* check if discrepancy is set to 0 */
+		if (dmu[i] == 0) {
+			dmu_0_count++;
+
+			tmp = ((cap - (lmu[i] >> 1) - 1) / 2);
+			if ((cap - (lmu[i] >> 1) - 1) & 0x1)
+				tmp += 2;
+			else
+				tmp += 1;
+
+			if (dmu_0_count == tmp) {
+				for (j = 0; j <= (lmu[i] >> 1) + 1; j++)
+					smu[(cap + 1) * num + j] =
+							smu[i * num + j];
+
+				lmu[cap + 1] = lmu[i];
+				return;
+			}
+
+			/* copy polynom */
+			for (j = 0; j <= lmu[i] >> 1; j++)
+				smu[(i + 1) * num + j] = smu[i * num + j];
+
+			/* copy previous polynom order to the next */
+			lmu[i + 1] = lmu[i];
+		} else {
+			ro = 0;
+			largest = -1;
+			/* find largest delta with dmu != 0 */
+			for (j = 0; j < i; j++) {
+				if ((dmu[j]) && (delta[j] > largest)) {
+					largest = delta[j];
+					ro = j;
+				}
+			}
+
+			/* compute difference */
+			diff = (mu[i] - mu[ro]);
+
+			/* Compute degree of the new smu polynomial */
+			if ((lmu[i] >> 1) > ((lmu[ro] >> 1) + diff))
+				lmu[i + 1] = lmu[i];
+			else
+				lmu[i + 1] = ((lmu[ro] >> 1) + diff) * 2;
+
+			/* Init smu[i+1] with 0 */
+			for (k = 0; k < num; k++)
+				smu[(i + 1) * num + k] = 0;
+
+			/* Compute smu[i+1] */
+			for (k = 0; k <= lmu[ro] >> 1; k++) {
+				int16_t a, b, c;
+
+				if (!(smu[ro * num + k] && dmu[i]))
+					continue;
+				a = readw_relaxed(index_of + dmu[i]);
+				b = readw_relaxed(index_of + dmu[ro]);
+				c = readw_relaxed(index_of + smu[ro * num + k]);
+				tmp = a + (cw_len - b) + c;
+				a = readw_relaxed(alpha_to + tmp % cw_len);
+				smu[(i + 1) * num + (k + diff)] = a;
+			}
+
+			for (k = 0; k <= lmu[i] >> 1; k++)
+				smu[(i + 1) * num + k] ^= smu[i * num + k];
+		}
+
+		/* End Computing Sigma (Mu+1) and L(mu) */
+		/* In either case compute delta */
+		delta[i + 1] = (mu[i + 1] * 2 - lmu[i + 1]) >> 1;
+
+		/* Do not compute discrepancy for the last iteration */
+		if (i >= cap)
+			continue;
+
+		for (k = 0; k <= (lmu[i + 1] >> 1); k++) {
+			tmp = 2 * (i - 1);
+			if (k == 0) {
+				dmu[i + 1] = si[tmp + 3];
+			} else if (smu[(i + 1) * num + k] && si[tmp + 3 - k]) {
+				int16_t a, b, c;
+				a = readw_relaxed(index_of +
+						smu[(i + 1) * num + k]);
+				b = si[2 * (i - 1) + 3 - k];
+				c = readw_relaxed(index_of + b);
+				tmp = a + c;
+				tmp %= cw_len;
+				dmu[i + 1] = readw_relaxed(alpha_to + tmp) ^
+					dmu[i + 1];
+			}
+		}
+	}
+
+	return;
+}
+
+static int pmecc_err_location(struct mtd_info *mtd)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct atmel_nand_host *host = nand_chip->priv;
+	unsigned long end_time;
+	const int cap = host->pmecc_corr_cap;
+	const int num = 2 * cap + 1;
+	int sector_size = host->pmecc_sector_size;
+	int err_nbr = 0;	/* number of error */
+	int roots_nbr;		/* number of roots */
+	int i;
+	uint32_t val;
+	int16_t *smu = host->pmecc_smu;
+
+	pmerrloc_writel(host->pmerrloc_base, ELDIS, PMERRLOC_DISABLE);
+
+	for (i = 0; i <= host->pmecc_lmu[cap + 1] >> 1; i++) {
+		pmerrloc_writel_sigma_relaxed(host->pmerrloc_base, i,
+				      smu[(cap + 1) * num + i]);
+		err_nbr++;
+	}
+
+	val = (err_nbr - 1) << 16;
+	if (sector_size == 1024)
+		val |= 1;
+
+	pmerrloc_writel(host->pmerrloc_base, ELCFG, val);
+	pmerrloc_writel(host->pmerrloc_base, ELEN,
+			sector_size * 8 + host->pmecc_degree * cap);
+
+	end_time = jiffies + msecs_to_jiffies(PMECC_MAX_TIMEOUT_MS);
+	while (!(pmerrloc_readl_relaxed(host->pmerrloc_base, ELISR)
+		 & PMERRLOC_CALC_DONE)) {
+		if (unlikely(time_after(jiffies, end_time))) {
+			dev_err(host->dev, "PMECC: Timeout to calculate error location.\n");
+			return -1;
+		}
+		cpu_relax();
+	}
+
+	roots_nbr = (pmerrloc_readl_relaxed(host->pmerrloc_base, ELISR)
+		& PMERRLOC_ERR_NUM_MASK) >> 8;
+	/* Number of roots == degree of smu hence <= cap */
+	if (roots_nbr == host->pmecc_lmu[cap + 1] >> 1)
+		return err_nbr - 1;
+
+	/* Number of roots does not match the degree of smu
+	 * unable to correct error */
+	return -1;
+}
+
+static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc,
+		int sector_num, int extra_bytes, int err_nbr)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct atmel_nand_host *host = nand_chip->priv;
+	int i = 0;
+	int byte_pos, bit_pos, sector_size, pos;
+	uint32_t tmp;
+	uint8_t err_byte;
+
+	sector_size = host->pmecc_sector_size;
+
+	while (err_nbr) {
+		tmp = pmerrloc_readl_el_relaxed(host->pmerrloc_base, i) - 1;
+		byte_pos = tmp / 8;
+		bit_pos  = tmp % 8;
+
+		if (byte_pos >= (sector_size + extra_bytes))
+			BUG();	/* should never happen */
+
+		if (byte_pos < sector_size) {
+			err_byte = *(buf + byte_pos);
+			*(buf + byte_pos) ^= (1 << bit_pos);
+
+			pos = sector_num * host->pmecc_sector_size + byte_pos;
+			dev_info(host->dev, "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
+				pos, bit_pos, err_byte, *(buf + byte_pos));
+		} else {
+			/* Bit flip in OOB area */
+			tmp = sector_num * host->pmecc_bytes_per_sector
+					+ (byte_pos - sector_size);
+			err_byte = ecc[tmp];
+			ecc[tmp] ^= (1 << bit_pos);
+
+			pos = tmp + nand_chip->ecc.layout->eccpos[0];
+			dev_info(host->dev, "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
+				pos, bit_pos, err_byte, ecc[tmp]);
+		}
+
+		i++;
+		err_nbr--;
+	}
+
+	return;
+}
+
+static int pmecc_correction(struct mtd_info *mtd, u32 pmecc_stat, uint8_t *buf,
+	u8 *ecc)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct atmel_nand_host *host = nand_chip->priv;
+	int i, err_nbr, eccbytes;
+	uint8_t *buf_pos;
+	int total_err = 0;
+
+	eccbytes = nand_chip->ecc.bytes;
+	for (i = 0; i < eccbytes; i++)
+		if (ecc[i] != 0xff)
+			goto normal_check;
+	/* Erased page, return OK */
+	return 0;
+
+normal_check:
+	for (i = 0; i < host->pmecc_sector_number; i++) {
+		err_nbr = 0;
+		if (pmecc_stat & 0x1) {
+			buf_pos = buf + i * host->pmecc_sector_size;
+
+			pmecc_gen_syndrome(mtd, i);
+			pmecc_substitute(mtd);
+			pmecc_get_sigma(mtd);
+
+			err_nbr = pmecc_err_location(mtd);
+			if (err_nbr == -1) {
+				dev_err(host->dev, "PMECC: Too many errors\n");
+				mtd->ecc_stats.failed++;
+				return -EIO;
+			} else {
+				pmecc_correct_data(mtd, buf_pos, ecc, i,
+					host->pmecc_bytes_per_sector, err_nbr);
+				mtd->ecc_stats.corrected += err_nbr;
+				total_err += err_nbr;
+			}
+		}
+		pmecc_stat >>= 1;
+	}
+
+	return total_err;
+}
+
+static void pmecc_enable(struct atmel_nand_host *host, int ecc_op)
+{
+	u32 val;
+
+	if (ecc_op != NAND_ECC_READ && ecc_op != NAND_ECC_WRITE) {
+		dev_err(host->dev, "atmel_nand: wrong pmecc operation type!");
+		return;
+	}
+
+	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST);
+	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
+	val = pmecc_readl_relaxed(host->ecc, CFG);
+
+	if (ecc_op == NAND_ECC_READ)
+		pmecc_writel(host->ecc, CFG, (val & ~PMECC_CFG_WRITE_OP)
+			| PMECC_CFG_AUTO_ENABLE);
+	else
+		pmecc_writel(host->ecc, CFG, (val | PMECC_CFG_WRITE_OP)
+			& ~PMECC_CFG_AUTO_ENABLE);
+
+	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_ENABLE);
+	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DATA);
+}
+
+static int atmel_nand_pmecc_read_page(struct mtd_info *mtd,
+	struct nand_chip *chip, uint8_t *buf, int oob_required, int page)
+{
+	struct atmel_nand_host *host = chip->priv;
+	int eccsize = chip->ecc.size;
+	uint8_t *oob = chip->oob_poi;
+	uint32_t *eccpos = chip->ecc.layout->eccpos;
+	uint32_t stat;
+	unsigned long end_time;
+	int bitflips = 0;
+
+	if (!host->nfc || !host->nfc->use_nfc_sram)
+		pmecc_enable(host, NAND_ECC_READ);
+
+	chip->read_buf(mtd, buf, eccsize);
+	chip->read_buf(mtd, oob, mtd->oobsize);
+
+	end_time = jiffies + msecs_to_jiffies(PMECC_MAX_TIMEOUT_MS);
+	while ((pmecc_readl_relaxed(host->ecc, SR) & PMECC_SR_BUSY)) {
+		if (unlikely(time_after(jiffies, end_time))) {
+			dev_err(host->dev, "PMECC: Timeout to get error status.\n");
+			return -EIO;
+		}
+		cpu_relax();
+	}
+
+	stat = pmecc_readl_relaxed(host->ecc, ISR);
+	if (stat != 0) {
+		bitflips = pmecc_correction(mtd, stat, buf, &oob[eccpos[0]]);
+		if (bitflips < 0)
+			/* uncorrectable errors */
+			return 0;
+	}
+
+	return bitflips;
+}
+
+static int atmel_nand_pmecc_write_page(struct mtd_info *mtd,
+		struct nand_chip *chip, const uint8_t *buf, int oob_required)
+{
+	struct atmel_nand_host *host = chip->priv;
+	uint32_t *eccpos = chip->ecc.layout->eccpos;
+	int i, j;
+	unsigned long end_time;
+
+	if (!host->nfc || !host->nfc->write_by_sram) {
+		pmecc_enable(host, NAND_ECC_WRITE);
+		chip->write_buf(mtd, (u8 *)buf, mtd->writesize);
+	}
+
+	end_time = jiffies + msecs_to_jiffies(PMECC_MAX_TIMEOUT_MS);
+	while ((pmecc_readl_relaxed(host->ecc, SR) & PMECC_SR_BUSY)) {
+		if (unlikely(time_after(jiffies, end_time))) {
+			dev_err(host->dev, "PMECC: Timeout to get ECC value.\n");
+			return -EIO;
+		}
+		cpu_relax();
+	}
+
+	for (i = 0; i < host->pmecc_sector_number; i++) {
+		for (j = 0; j < host->pmecc_bytes_per_sector; j++) {
+			int pos;
+
+			pos = i * host->pmecc_bytes_per_sector + j;
+			chip->oob_poi[eccpos[pos]] =
+				pmecc_readb_ecc_relaxed(host->ecc, i, j);
+		}
+	}
+	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	return 0;
+}
+
+static void atmel_pmecc_core_init(struct mtd_info *mtd)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct atmel_nand_host *host = nand_chip->priv;
+	uint32_t val = 0;
+	struct nand_ecclayout *ecc_layout;
+
+	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST);
+	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
+
+	switch (host->pmecc_corr_cap) {
+	case 2:
+		val = PMECC_CFG_BCH_ERR2;
+		break;
+	case 4:
+		val = PMECC_CFG_BCH_ERR4;
+		break;
+	case 8:
+		val = PMECC_CFG_BCH_ERR8;
+		break;
+	case 12:
+		val = PMECC_CFG_BCH_ERR12;
+		break;
+	case 24:
+		val = PMECC_CFG_BCH_ERR24;
+		break;
+	}
+
+	if (host->pmecc_sector_size == 512)
+		val |= PMECC_CFG_SECTOR512;
+	else if (host->pmecc_sector_size == 1024)
+		val |= PMECC_CFG_SECTOR1024;
+
+	switch (host->pmecc_sector_number) {
+	case 1:
+		val |= PMECC_CFG_PAGE_1SECTOR;
+		break;
+	case 2:
+		val |= PMECC_CFG_PAGE_2SECTORS;
+		break;
+	case 4:
+		val |= PMECC_CFG_PAGE_4SECTORS;
+		break;
+	case 8:
+		val |= PMECC_CFG_PAGE_8SECTORS;
+		break;
+	}
+
+	val |= (PMECC_CFG_READ_OP | PMECC_CFG_SPARE_DISABLE
+		| PMECC_CFG_AUTO_DISABLE);
+	pmecc_writel(host->ecc, CFG, val);
+
+	ecc_layout = nand_chip->ecc.layout;
+	pmecc_writel(host->ecc, SAREA, mtd->oobsize - 1);
+	pmecc_writel(host->ecc, SADDR, ecc_layout->eccpos[0]);
+	pmecc_writel(host->ecc, EADDR,
+			ecc_layout->eccpos[ecc_layout->eccbytes - 1]);
+	/* See datasheet about PMECC Clock Control Register */
+	pmecc_writel(host->ecc, CLK, 2);
+	pmecc_writel(host->ecc, IDR, 0xff);
+	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_ENABLE);
+}
+
+/*
+ * Get minimum ecc requirements from NAND.
+ * If pmecc-cap, pmecc-sector-size in DTS are not specified, this function
+ * will set them according to minimum ecc requirement. Otherwise, use the
+ * value in DTS file.
+ * return 0 if success. otherwise return error code.
+ */
+static int pmecc_choose_ecc(struct atmel_nand_host *host,
+		int *cap, int *sector_size)
+{
+	/* Get minimum ECC requirements */
+	if (host->nand_chip.ecc_strength_ds) {
+		*cap = host->nand_chip.ecc_strength_ds;
+		*sector_size = host->nand_chip.ecc_step_ds;
+		dev_info(host->dev, "minimum ECC: %d bits in %d bytes\n",
+				*cap, *sector_size);
+	} else {
+		*cap = 2;
+		*sector_size = 512;
+		dev_info(host->dev, "can't detect min. ECC, assume 2 bits in 512 bytes\n");
+	}
+
+	/* If device tree doesn't specify, use NAND's minimum ECC parameters */
+	if (host->pmecc_corr_cap == 0) {
+		/* use the most fitable ecc bits (the near bigger one ) */
+		if (*cap <= 2)
+			host->pmecc_corr_cap = 2;
+		else if (*cap <= 4)
+			host->pmecc_corr_cap = 4;
+		else if (*cap <= 8)
+			host->pmecc_corr_cap = 8;
+		else if (*cap <= 12)
+			host->pmecc_corr_cap = 12;
+		else if (*cap <= 24)
+			host->pmecc_corr_cap = 24;
+		else
+			return -EINVAL;
+	}
+	if (host->pmecc_sector_size == 0) {
+		/* use the most fitable sector size (the near smaller one ) */
+		if (*sector_size >= 1024)
+			host->pmecc_sector_size = 1024;
+		else if (*sector_size >= 512)
+			host->pmecc_sector_size = 512;
+		else
+			return -EINVAL;
+	}
+	return 0;
+}
+
+static int atmel_pmecc_nand_init_params(struct platform_device *pdev,
+					 struct atmel_nand_host *host)
+{
+	struct mtd_info *mtd = &host->mtd;
+	struct nand_chip *nand_chip = &host->nand_chip;
+	struct resource *regs, *regs_pmerr, *regs_rom;
+	int cap, sector_size, err_no;
+
+	err_no = pmecc_choose_ecc(host, &cap, &sector_size);
+	if (err_no) {
+		dev_err(host->dev, "The NAND flash's ECC requirement are not support!");
+		return err_no;
+	}
+
+	if (cap > host->pmecc_corr_cap ||
+			sector_size != host->pmecc_sector_size)
+		dev_info(host->dev, "WARNING: Be Caution! Using different PMECC parameters from Nand ONFI ECC reqirement.\n");
+
+	cap = host->pmecc_corr_cap;
+	sector_size = host->pmecc_sector_size;
+	host->pmecc_lookup_table_offset = (sector_size == 512) ?
+			host->pmecc_lookup_table_offset_512 :
+			host->pmecc_lookup_table_offset_1024;
+
+	dev_info(host->dev, "Initialize PMECC params, cap: %d, sector: %d\n",
+		 cap, sector_size);
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!regs) {
+		dev_warn(host->dev,
+			"Can't get I/O resource regs for PMECC controller, rolling back on software ECC\n");
+		nand_chip->ecc.mode = NAND_ECC_SOFT;
+		return 0;
+	}
+
+	host->ecc = devm_ioremap_resource(&pdev->dev, regs);
+	if (IS_ERR(host->ecc)) {
+		dev_err(host->dev, "ioremap failed\n");
+		err_no = PTR_ERR(host->ecc);
+		goto err;
+	}
+
+	regs_pmerr = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+	host->pmerrloc_base = devm_ioremap_resource(&pdev->dev, regs_pmerr);
+	if (IS_ERR(host->pmerrloc_base)) {
+		dev_err(host->dev,
+			"Can not get I/O resource for PMECC ERRLOC controller!\n");
+		err_no = PTR_ERR(host->pmerrloc_base);
+		goto err;
+	}
+
+	regs_rom = platform_get_resource(pdev, IORESOURCE_MEM, 3);
+	host->pmecc_rom_base = devm_ioremap_resource(&pdev->dev, regs_rom);
+	if (IS_ERR(host->pmecc_rom_base)) {
+		dev_err(host->dev, "Can not get I/O resource for ROM!\n");
+		err_no = PTR_ERR(host->pmecc_rom_base);
+		goto err;
+	}
+
+	/* ECC is calculated for the whole page (1 step) */
+	nand_chip->ecc.size = mtd->writesize;
+
+	/* set ECC page size and oob layout */
+	switch (mtd->writesize) {
+	case 2048:
+		host->pmecc_degree = (sector_size == 512) ?
+			PMECC_GF_DIMENSION_13 : PMECC_GF_DIMENSION_14;
+		host->pmecc_cw_len = (1 << host->pmecc_degree) - 1;
+		host->pmecc_sector_number = mtd->writesize / sector_size;
+		host->pmecc_bytes_per_sector = pmecc_get_ecc_bytes(
+			cap, sector_size);
+		host->pmecc_alpha_to = pmecc_get_alpha_to(host);
+		host->pmecc_index_of = host->pmecc_rom_base +
+			host->pmecc_lookup_table_offset;
+
+		nand_chip->ecc.steps = 1;
+		nand_chip->ecc.strength = cap;
+		nand_chip->ecc.bytes = host->pmecc_bytes_per_sector *
+				       host->pmecc_sector_number;
+		if (nand_chip->ecc.bytes > mtd->oobsize - 2) {
+			dev_err(host->dev, "No room for ECC bytes\n");
+			err_no = -EINVAL;
+			goto err;
+		}
+		pmecc_config_ecc_layout(&atmel_pmecc_oobinfo,
+					mtd->oobsize,
+					nand_chip->ecc.bytes);
+		nand_chip->ecc.layout = &atmel_pmecc_oobinfo;
+		break;
+	case 512:
+	case 1024:
+	case 4096:
+		/* TODO */
+		dev_warn(host->dev,
+			"Unsupported page size for PMECC, use Software ECC\n");
+	default:
+		/* page size not handled by HW ECC */
+		/* switching back to soft ECC */
+		nand_chip->ecc.mode = NAND_ECC_SOFT;
+		return 0;
+	}
+
+	/* Allocate data for PMECC computation */
+	err_no = pmecc_data_alloc(host);
+	if (err_no) {
+		dev_err(host->dev,
+				"Cannot allocate memory for PMECC computation!\n");
+		goto err;
+	}
+
+	nand_chip->options |= NAND_NO_SUBPAGE_WRITE;
+	nand_chip->ecc.read_page = atmel_nand_pmecc_read_page;
+	nand_chip->ecc.write_page = atmel_nand_pmecc_write_page;
+
+	atmel_pmecc_core_init(mtd);
+
+	return 0;
+
+err:
+	return err_no;
+}
+
 /*
  * Calculate HW ECC
  *
@@ -215,9 +1269,10 @@ static int atmel_nand_calculate(struct mtd_info *mtd,
  * mtd:        mtd info structure
  * chip:       nand chip info structure
  * buf:        buffer to store read data
+ * oob_required:    caller expects OOB data read to chip->oob_poi
  */
-static int atmel_nand_read_page(struct mtd_info *mtd,
-		struct nand_chip *chip, uint8_t *buf, int page)
+static int atmel_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+				uint8_t *buf, int oob_required, int page)
 {
 	int eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
@@ -226,6 +1281,7 @@ static int atmel_nand_read_page(struct mtd_info *mtd,
 	uint8_t *oob = chip->oob_poi;
 	uint8_t *ecc_pos;
 	int stat;
+	unsigned int max_bitflips = 0;
 
 	/*
 	 * Errata: ALE is incorrectly wired up to the ECC controller
@@ -235,10 +1291,9 @@ static int atmel_nand_read_page(struct mtd_info *mtd,
 	 * Workaround: Reset the parity registers before reading the
 	 * actual data.
 	 */
-	if (cpu_is_at32ap7000()) {
-		struct atmel_nand_host *host = chip->priv;
+	struct atmel_nand_host *host = chip->priv;
+	if (host->board.need_reset_workaround)
 		ecc_writel(host->ecc, CR, ATMEL_ECC_RST);
-	}
 
 	/* read the page */
 	chip->read_buf(mtd, p, eccsize);
@@ -262,10 +1317,12 @@ static int atmel_nand_read_page(struct mtd_info *mtd,
 	/* check if there's an error */
 	stat = chip->ecc.correct(mtd, p, oob, NULL);
 
-	if (stat < 0)
+	if (stat < 0) {
 		mtd->ecc_stats.failed++;
-	else
+	} else {
 		mtd->ecc_stats.corrected += stat;
+		max_bitflips = max_t(unsigned int, max_bitflips, stat);
+	}
 
 	/* get back to oob start (end of page) */
 	chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
@@ -273,7 +1330,7 @@ static int atmel_nand_read_page(struct mtd_info *mtd,
 	/* read the oob */
 	chip->read_buf(mtd, oob, mtd->oobsize);
 
-	return 0;
+	return max_bitflips;
 }
 
 /*
@@ -357,58 +1414,583 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
  */
 static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
 {
-	if (cpu_is_at32ap7000()) {
-		struct nand_chip *nand_chip = mtd->priv;
-		struct atmel_nand_host *host = nand_chip->priv;
+	struct nand_chip *nand_chip = mtd->priv;
+	struct atmel_nand_host *host = nand_chip->priv;
+
+	if (host->board.need_reset_workaround)
 		ecc_writel(host->ecc, CR, ATMEL_ECC_RST);
+}
+
+static int atmel_of_init_port(struct atmel_nand_host *host,
+			      struct device_node *np)
+{
+	u32 val;
+	u32 offset[2];
+	int ecc_mode;
+	struct atmel_nand_data *board = &host->board;
+	enum of_gpio_flags flags = 0;
+
+	if (of_property_read_u32(np, "atmel,nand-addr-offset", &val) == 0) {
+		if (val >= 32) {
+			dev_err(host->dev, "invalid addr-offset %u\n", val);
+			return -EINVAL;
+		}
+		board->ale = val;
+	}
+
+	if (of_property_read_u32(np, "atmel,nand-cmd-offset", &val) == 0) {
+		if (val >= 32) {
+			dev_err(host->dev, "invalid cmd-offset %u\n", val);
+			return -EINVAL;
+		}
+		board->cle = val;
+	}
+
+	ecc_mode = of_get_nand_ecc_mode(np);
+
+	board->ecc_mode = ecc_mode < 0 ? NAND_ECC_SOFT : ecc_mode;
+
+	board->on_flash_bbt = of_get_nand_on_flash_bbt(np);
+
+	board->has_dma = of_property_read_bool(np, "atmel,nand-has-dma");
+
+	if (of_get_nand_bus_width(np) == 16)
+		board->bus_width_16 = 1;
+
+	board->rdy_pin = of_get_gpio_flags(np, 0, &flags);
+	board->rdy_pin_active_low = (flags == OF_GPIO_ACTIVE_LOW);
+
+	board->enable_pin = of_get_gpio(np, 1);
+	board->det_pin = of_get_gpio(np, 2);
+
+	host->has_pmecc = of_property_read_bool(np, "atmel,has-pmecc");
+
+	/* load the nfc driver if there is */
+	of_platform_populate(np, NULL, NULL, host->dev);
+
+	if (!(board->ecc_mode == NAND_ECC_HW) || !host->has_pmecc)
+		return 0;	/* Not using PMECC */
+
+	/* use PMECC, get correction capability, sector size and lookup
+	 * table offset.
+	 * If correction bits and sector size are not specified, then find
+	 * them from NAND ONFI parameters.
+	 */
+	if (of_property_read_u32(np, "atmel,pmecc-cap", &val) == 0) {
+		if ((val != 2) && (val != 4) && (val != 8) && (val != 12) &&
+				(val != 24)) {
+			dev_err(host->dev,
+				"Unsupported PMECC correction capability: %d; should be 2, 4, 8, 12 or 24\n",
+				val);
+			return -EINVAL;
+		}
+		host->pmecc_corr_cap = (u8)val;
 	}
+
+	if (of_property_read_u32(np, "atmel,pmecc-sector-size", &val) == 0) {
+		if ((val != 512) && (val != 1024)) {
+			dev_err(host->dev,
+				"Unsupported PMECC sector size: %d; should be 512 or 1024 bytes\n",
+				val);
+			return -EINVAL;
+		}
+		host->pmecc_sector_size = (u16)val;
+	}
+
+	if (of_property_read_u32_array(np, "atmel,pmecc-lookup-table-offset",
+			offset, 2) != 0) {
+		dev_err(host->dev, "Cannot get PMECC lookup table offset\n");
+		return -EINVAL;
+	}
+	if (!offset[0] && !offset[1]) {
+		dev_err(host->dev, "Invalid PMECC lookup table offset\n");
+		return -EINVAL;
+	}
+	host->pmecc_lookup_table_offset_512 = offset[0];
+	host->pmecc_lookup_table_offset_1024 = offset[1];
+
+	return 0;
+}
+
+static int atmel_hw_nand_init_params(struct platform_device *pdev,
+					 struct atmel_nand_host *host)
+{
+	struct mtd_info *mtd = &host->mtd;
+	struct nand_chip *nand_chip = &host->nand_chip;
+	struct resource		*regs;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!regs) {
+		dev_err(host->dev,
+			"Can't get I/O resource regs, use software ECC\n");
+		nand_chip->ecc.mode = NAND_ECC_SOFT;
+		return 0;
+	}
+
+	host->ecc = devm_ioremap_resource(&pdev->dev, regs);
+	if (IS_ERR(host->ecc)) {
+		dev_err(host->dev, "ioremap failed\n");
+		return PTR_ERR(host->ecc);
+	}
+
+	/* ECC is calculated for the whole page (1 step) */
+	nand_chip->ecc.size = mtd->writesize;
+
+	/* set ECC page size and oob layout */
+	switch (mtd->writesize) {
+	case 512:
+		nand_chip->ecc.layout = &atmel_oobinfo_small;
+		ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_528);
+		break;
+	case 1024:
+		nand_chip->ecc.layout = &atmel_oobinfo_large;
+		ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_1056);
+		break;
+	case 2048:
+		nand_chip->ecc.layout = &atmel_oobinfo_large;
+		ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_2112);
+		break;
+	case 4096:
+		nand_chip->ecc.layout = &atmel_oobinfo_large;
+		ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_4224);
+		break;
+	default:
+		/* page size not handled by HW ECC */
+		/* switching back to soft ECC */
+		nand_chip->ecc.mode = NAND_ECC_SOFT;
+		return 0;
+	}
+
+	/* set up for HW ECC */
+	nand_chip->ecc.calculate = atmel_nand_calculate;
+	nand_chip->ecc.correct = atmel_nand_correct;
+	nand_chip->ecc.hwctl = atmel_nand_hwctl;
+	nand_chip->ecc.read_page = atmel_nand_read_page;
+	nand_chip->ecc.bytes = 4;
+	nand_chip->ecc.strength = 1;
+
+	return 0;
+}
+
+/* SMC interrupt service routine */
+static irqreturn_t hsmc_interrupt(int irq, void *dev_id)
+{
+	struct atmel_nand_host *host = dev_id;
+	u32 status, mask, pending;
+	irqreturn_t ret = IRQ_HANDLED;
+
+	status = nfc_readl(host->nfc->hsmc_regs, SR);
+	mask = nfc_readl(host->nfc->hsmc_regs, IMR);
+	pending = status & mask;
+
+	if (pending & NFC_SR_XFR_DONE) {
+		complete(&host->nfc->comp_nfc);
+		nfc_writel(host->nfc->hsmc_regs, IDR, NFC_SR_XFR_DONE);
+	} else if (pending & NFC_SR_RB_EDGE) {
+		complete(&host->nfc->comp_nfc);
+		nfc_writel(host->nfc->hsmc_regs, IDR, NFC_SR_RB_EDGE);
+	} else if (pending & NFC_SR_CMD_DONE) {
+		complete(&host->nfc->comp_nfc);
+		nfc_writel(host->nfc->hsmc_regs, IDR, NFC_SR_CMD_DONE);
+	} else {
+		ret = IRQ_NONE;
+	}
+
+	return ret;
 }
 
-#ifdef CONFIG_MTD_PARTITIONS
-static const char *part_probes[] = { "cmdlinepart", NULL };
-#endif
+/* NFC(Nand Flash Controller) related functions */
+static int nfc_wait_interrupt(struct atmel_nand_host *host, u32 flag)
+{
+	unsigned long timeout;
+	init_completion(&host->nfc->comp_nfc);
+
+	/* Enable interrupt that need to wait for */
+	nfc_writel(host->nfc->hsmc_regs, IER, flag);
+
+	timeout = wait_for_completion_timeout(&host->nfc->comp_nfc,
+			msecs_to_jiffies(NFC_TIME_OUT_MS));
+	if (timeout)
+		return 0;
+
+	/* Time out to wait for the interrupt */
+	dev_err(host->dev, "Time out to wait for interrupt: 0x%08x\n", flag);
+	return -ETIMEDOUT;
+}
+
+static int nfc_send_command(struct atmel_nand_host *host,
+	unsigned int cmd, unsigned int addr, unsigned char cycle0)
+{
+	unsigned long timeout;
+	dev_dbg(host->dev,
+		"nfc_cmd: 0x%08x, addr1234: 0x%08x, cycle0: 0x%02x\n",
+		cmd, addr, cycle0);
+
+	timeout = jiffies + msecs_to_jiffies(NFC_TIME_OUT_MS);
+	while (nfc_cmd_readl(NFCADDR_CMD_NFCBUSY, host->nfc->base_cmd_regs)
+			& NFCADDR_CMD_NFCBUSY) {
+		if (time_after(jiffies, timeout)) {
+			dev_err(host->dev,
+				"Time out to wait CMD_NFCBUSY ready!\n");
+			return -ETIMEDOUT;
+		}
+	}
+	nfc_writel(host->nfc->hsmc_regs, CYCLE0, cycle0);
+	nfc_cmd_addr1234_writel(cmd, addr, host->nfc->base_cmd_regs);
+	return nfc_wait_interrupt(host, NFC_SR_CMD_DONE);
+}
+
+static int nfc_device_ready(struct mtd_info *mtd)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct atmel_nand_host *host = nand_chip->priv;
+	if (!nfc_wait_interrupt(host, NFC_SR_RB_EDGE))
+		return 1;
+	return 0;
+}
+
+static void nfc_select_chip(struct mtd_info *mtd, int chip)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct atmel_nand_host *host = nand_chip->priv;
 
+	if (chip == -1)
+		nfc_writel(host->nfc->hsmc_regs, CTRL, NFC_CTRL_DISABLE);
+	else
+		nfc_writel(host->nfc->hsmc_regs, CTRL, NFC_CTRL_ENABLE);
+}
+
+static int nfc_make_addr(struct mtd_info *mtd, int command, int column,
+		int page_addr, unsigned int *addr1234, unsigned int *cycle0)
+{
+	struct nand_chip *chip = mtd->priv;
+
+	int acycle = 0;
+	unsigned char addr_bytes[8];
+	int index = 0, bit_shift;
+
+	BUG_ON(addr1234 == NULL || cycle0 == NULL);
+
+	*cycle0 = 0;
+	*addr1234 = 0;
+
+	if (column != -1) {
+		if (chip->options & NAND_BUSWIDTH_16 &&
+				!nand_opcode_8bits(command))
+			column >>= 1;
+		addr_bytes[acycle++] = column & 0xff;
+		if (mtd->writesize > 512)
+			addr_bytes[acycle++] = (column >> 8) & 0xff;
+	}
+
+	if (page_addr != -1) {
+		addr_bytes[acycle++] = page_addr & 0xff;
+		addr_bytes[acycle++] = (page_addr >> 8) & 0xff;
+		if (chip->chipsize > (128 << 20))
+			addr_bytes[acycle++] = (page_addr >> 16) & 0xff;
+	}
+
+	if (acycle > 4)
+		*cycle0 = addr_bytes[index++];
+
+	for (bit_shift = 0; index < acycle; bit_shift += 8)
+		*addr1234 += addr_bytes[index++] << bit_shift;
+
+	/* return acycle in cmd register */
+	return acycle << NFCADDR_CMD_ACYCLE_BIT_POS;
+}
+
+static void nfc_nand_command(struct mtd_info *mtd, unsigned int command,
+				int column, int page_addr)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct atmel_nand_host *host = chip->priv;
+	unsigned long timeout;
+	unsigned int nfc_addr_cmd = 0;
+
+	unsigned int cmd1 = command << NFCADDR_CMD_CMD1_BIT_POS;
+
+	/* Set default settings: no cmd2, no addr cycle. read from nand */
+	unsigned int cmd2 = 0;
+	unsigned int vcmd2 = 0;
+	int acycle = NFCADDR_CMD_ACYCLE_NONE;
+	int csid = NFCADDR_CMD_CSID_3;
+	int dataen = NFCADDR_CMD_DATADIS;
+	int nfcwr = NFCADDR_CMD_NFCRD;
+	unsigned int addr1234 = 0;
+	unsigned int cycle0 = 0;
+	bool do_addr = true;
+	host->nfc->data_in_sram = NULL;
+
+	dev_dbg(host->dev, "%s: cmd = 0x%02x, col = 0x%08x, page = 0x%08x\n",
+	     __func__, command, column, page_addr);
+
+	switch (command) {
+	case NAND_CMD_RESET:
+		nfc_addr_cmd = cmd1 | acycle | csid | dataen | nfcwr;
+		nfc_send_command(host, nfc_addr_cmd, addr1234, cycle0);
+		udelay(chip->chip_delay);
+
+		nfc_nand_command(mtd, NAND_CMD_STATUS, -1, -1);
+		timeout = jiffies + msecs_to_jiffies(NFC_TIME_OUT_MS);
+		while (!(chip->read_byte(mtd) & NAND_STATUS_READY)) {
+			if (time_after(jiffies, timeout)) {
+				dev_err(host->dev,
+					"Time out to wait status ready!\n");
+				break;
+			}
+		}
+		return;
+	case NAND_CMD_STATUS:
+		do_addr = false;
+		break;
+	case NAND_CMD_PARAM:
+	case NAND_CMD_READID:
+		do_addr = false;
+		acycle = NFCADDR_CMD_ACYCLE_1;
+		if (column != -1)
+			addr1234 = column;
+		break;
+	case NAND_CMD_RNDOUT:
+		cmd2 = NAND_CMD_RNDOUTSTART << NFCADDR_CMD_CMD2_BIT_POS;
+		vcmd2 = NFCADDR_CMD_VCMD2;
+		break;
+	case NAND_CMD_READ0:
+	case NAND_CMD_READOOB:
+		if (command == NAND_CMD_READOOB) {
+			column += mtd->writesize;
+			command = NAND_CMD_READ0; /* only READ0 is valid */
+			cmd1 = command << NFCADDR_CMD_CMD1_BIT_POS;
+		}
+		if (host->nfc->use_nfc_sram) {
+			/* Enable Data transfer to sram */
+			dataen = NFCADDR_CMD_DATAEN;
+
+			/* Need enable PMECC now, since NFC will transfer
+			 * data in bus after sending nfc read command.
+			 */
+			if (chip->ecc.mode == NAND_ECC_HW && host->has_pmecc)
+				pmecc_enable(host, NAND_ECC_READ);
+		}
+
+		cmd2 = NAND_CMD_READSTART << NFCADDR_CMD_CMD2_BIT_POS;
+		vcmd2 = NFCADDR_CMD_VCMD2;
+		break;
+	/* For prgramming command, the cmd need set to write enable */
+	case NAND_CMD_PAGEPROG:
+	case NAND_CMD_SEQIN:
+	case NAND_CMD_RNDIN:
+		nfcwr = NFCADDR_CMD_NFCWR;
+		if (host->nfc->will_write_sram && command == NAND_CMD_SEQIN)
+			dataen = NFCADDR_CMD_DATAEN;
+		break;
+	default:
+		break;
+	}
+
+	if (do_addr)
+		acycle = nfc_make_addr(mtd, command, column, page_addr,
+				&addr1234, &cycle0);
+
+	nfc_addr_cmd = cmd1 | cmd2 | vcmd2 | acycle | csid | dataen | nfcwr;
+	nfc_send_command(host, nfc_addr_cmd, addr1234, cycle0);
+
+	if (dataen == NFCADDR_CMD_DATAEN)
+		if (nfc_wait_interrupt(host, NFC_SR_XFR_DONE))
+			dev_err(host->dev, "something wrong, No XFR_DONE interrupt comes.\n");
+
+	/*
+	 * Program and erase have their own busy handlers status, sequential
+	 * in, and deplete1 need no delay.
+	 */
+	switch (command) {
+	case NAND_CMD_CACHEDPROG:
+	case NAND_CMD_PAGEPROG:
+	case NAND_CMD_ERASE1:
+	case NAND_CMD_ERASE2:
+	case NAND_CMD_RNDIN:
+	case NAND_CMD_STATUS:
+	case NAND_CMD_RNDOUT:
+	case NAND_CMD_SEQIN:
+	case NAND_CMD_READID:
+		return;
+
+	case NAND_CMD_READ0:
+		if (dataen == NFCADDR_CMD_DATAEN) {
+			host->nfc->data_in_sram = host->nfc->sram_bank0 +
+				nfc_get_sram_off(host);
+			return;
+		}
+		/* fall through */
+	default:
+		nfc_wait_interrupt(host, NFC_SR_RB_EDGE);
+	}
+}
+
+static int nfc_sram_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+			uint32_t offset, int data_len, const uint8_t *buf,
+			int oob_required, int page, int cached, int raw)
+{
+	int cfg, len;
+	int status = 0;
+	struct atmel_nand_host *host = chip->priv;
+	void __iomem *sram = host->nfc->sram_bank0 + nfc_get_sram_off(host);
+
+	/* Subpage write is not supported */
+	if (offset || (data_len < mtd->writesize))
+		return -EINVAL;
+
+	cfg = nfc_readl(host->nfc->hsmc_regs, CFG);
+	len = mtd->writesize;
+
+	if (unlikely(raw)) {
+		len += mtd->oobsize;
+		nfc_writel(host->nfc->hsmc_regs, CFG, cfg | NFC_CFG_WSPARE);
+	} else
+		nfc_writel(host->nfc->hsmc_regs, CFG, cfg & ~NFC_CFG_WSPARE);
+
+	/* Copy page data to sram that will write to nand via NFC */
+	if (use_dma) {
+		if (atmel_nand_dma_op(mtd, (void *)buf, len, 0) != 0)
+			/* Fall back to use cpu copy */
+			memcpy32_toio(sram, buf, len);
+	} else {
+		memcpy32_toio(sram, buf, len);
+	}
+
+	if (chip->ecc.mode == NAND_ECC_HW && host->has_pmecc)
+		/*
+		 * When use NFC sram, need set up PMECC before send
+		 * NAND_CMD_SEQIN command. Since when the nand command
+		 * is sent, nfc will do transfer from sram and nand.
+		 */
+		pmecc_enable(host, NAND_ECC_WRITE);
+
+	host->nfc->will_write_sram = true;
+	chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
+	host->nfc->will_write_sram = false;
+
+	if (likely(!raw))
+		/* Need to write ecc into oob */
+		status = chip->ecc.write_page(mtd, chip, buf, oob_required);
+
+	if (status < 0)
+		return status;
+
+	chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+	status = chip->waitfunc(mtd, chip);
+
+	if ((status & NAND_STATUS_FAIL) && (chip->errstat))
+		status = chip->errstat(mtd, chip, FL_WRITING, status, page);
+
+	if (status & NAND_STATUS_FAIL)
+		return -EIO;
+
+	return 0;
+}
+
+static int nfc_sram_init(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct atmel_nand_host *host = chip->priv;
+	int res = 0;
+
+	/* Initialize the NFC CFG register */
+	unsigned int cfg_nfc = 0;
+
+	/* set page size and oob layout */
+	switch (mtd->writesize) {
+	case 512:
+		cfg_nfc = NFC_CFG_PAGESIZE_512;
+		break;
+	case 1024:
+		cfg_nfc = NFC_CFG_PAGESIZE_1024;
+		break;
+	case 2048:
+		cfg_nfc = NFC_CFG_PAGESIZE_2048;
+		break;
+	case 4096:
+		cfg_nfc = NFC_CFG_PAGESIZE_4096;
+		break;
+	case 8192:
+		cfg_nfc = NFC_CFG_PAGESIZE_8192;
+		break;
+	default:
+		dev_err(host->dev, "Unsupported page size for NFC.\n");
+		res = -ENXIO;
+		return res;
+	}
+
+	/* oob bytes size = (NFCSPARESIZE + 1) * 4
+	 * Max support spare size is 512 bytes. */
+	cfg_nfc |= (((mtd->oobsize / 4) - 1) << NFC_CFG_NFC_SPARESIZE_BIT_POS
+		& NFC_CFG_NFC_SPARESIZE);
+	/* default set a max timeout */
+	cfg_nfc |= NFC_CFG_RSPARE |
+			NFC_CFG_NFC_DTOCYC | NFC_CFG_NFC_DTOMUL;
+
+	nfc_writel(host->nfc->hsmc_regs, CFG, cfg_nfc);
+
+	host->nfc->will_write_sram = false;
+	nfc_set_sram_bank(host, 0);
+
+	/* Use Write page with NFC SRAM only for PMECC or ECC NONE. */
+	if (host->nfc->write_by_sram) {
+		if ((chip->ecc.mode == NAND_ECC_HW && host->has_pmecc) ||
+				chip->ecc.mode == NAND_ECC_NONE)
+			chip->write_page = nfc_sram_write_page;
+		else
+			host->nfc->write_by_sram = false;
+	}
+
+	dev_info(host->dev, "Using NFC Sram read %s\n",
+			host->nfc->write_by_sram ? "and write" : "");
+	return 0;
+}
+
+static struct platform_driver atmel_nand_nfc_driver;
 /*
  * Probe for the NAND device.
  */
-static int __init atmel_nand_probe(struct platform_device *pdev)
+static int atmel_nand_probe(struct platform_device *pdev)
 {
 	struct atmel_nand_host *host;
 	struct mtd_info *mtd;
 	struct nand_chip *nand_chip;
-	struct resource *regs;
 	struct resource *mem;
-	int res;
-
-#ifdef CONFIG_MTD_PARTITIONS
-	struct mtd_partition *partitions = NULL;
-	int num_partitions = 0;
-#endif
-
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem) {
-		printk(KERN_ERR "atmel_nand: can't get I/O resource mem\n");
-		return -ENXIO;
-	}
+	struct mtd_part_parser_data ppdata = {};
+	int res, irq;
 
 	/* Allocate memory for the device structure (and zero it) */
-	host = kzalloc(sizeof(struct atmel_nand_host), GFP_KERNEL);
-	if (!host) {
-		printk(KERN_ERR "atmel_nand: failed to allocate device structure.\n");
+	host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
+	if (!host)
 		return -ENOMEM;
-	}
 
-	host->io_base = ioremap(mem->start, mem->end - mem->start + 1);
-	if (host->io_base == NULL) {
-		printk(KERN_ERR "atmel_nand: ioremap failed\n");
-		res = -EIO;
+	res = platform_driver_register(&atmel_nand_nfc_driver);
+	if (res)
+		dev_err(&pdev->dev, "atmel_nand: can't register NFC driver\n");
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	host->io_base = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(host->io_base)) {
+		dev_err(&pdev->dev, "atmel_nand: ioremap resource failed\n");
+		res = PTR_ERR(host->io_base);
 		goto err_nand_ioremap;
 	}
+	host->io_phys = (dma_addr_t)mem->start;
 
 	mtd = &host->mtd;
 	nand_chip = &host->nand_chip;
-	host->board = pdev->dev.platform_data;
 	host->dev = &pdev->dev;
+	if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) {
+		/* Only when CONFIG_OF is enabled of_node can be parsed */
+		res = atmel_of_init_port(host, pdev->dev.of_node);
+		if (res)
+			goto err_nand_ioremap;
+	} else {
+		memcpy(&host->board, dev_get_platdata(&pdev->dev),
+		       sizeof(struct atmel_nand_data));
+	}
 
 	nand_chip->priv = host;		/* link the private data structures */
 	mtd->priv = nand_chip;
@@ -417,62 +1999,100 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 	/* Set address of NAND IO lines */
 	nand_chip->IO_ADDR_R = host->io_base;
 	nand_chip->IO_ADDR_W = host->io_base;
-	nand_chip->cmd_ctrl = atmel_nand_cmd_ctrl;
 
-	if (host->board->rdy_pin)
-		nand_chip->dev_ready = atmel_nand_device_ready;
+	if (nand_nfc.is_initialized) {
+		/* NFC driver is probed and initialized */
+		host->nfc = &nand_nfc;
 
-	regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (!regs && hard_ecc) {
-		printk(KERN_ERR "atmel_nand: can't get I/O resource "
-				"regs\nFalling back on software ECC\n");
-	}
+		nand_chip->select_chip = nfc_select_chip;
+		nand_chip->dev_ready = nfc_device_ready;
+		nand_chip->cmdfunc = nfc_nand_command;
 
-	nand_chip->ecc.mode = NAND_ECC_SOFT;	/* enable ECC */
-	if (no_ecc)
-		nand_chip->ecc.mode = NAND_ECC_NONE;
-	if (hard_ecc && regs) {
-		host->ecc = ioremap(regs->start, regs->end - regs->start + 1);
-		if (host->ecc == NULL) {
-			printk(KERN_ERR "atmel_nand: ioremap failed\n");
-			res = -EIO;
-			goto err_ecc_ioremap;
+		/* Initialize the interrupt for NFC */
+		irq = platform_get_irq(pdev, 0);
+		if (irq < 0) {
+			dev_err(host->dev, "Cannot get HSMC irq!\n");
+			res = irq;
+			goto err_nand_ioremap;
 		}
-		nand_chip->ecc.mode = NAND_ECC_HW;
-		nand_chip->ecc.calculate = atmel_nand_calculate;
-		nand_chip->ecc.correct = atmel_nand_correct;
-		nand_chip->ecc.hwctl = atmel_nand_hwctl;
-		nand_chip->ecc.read_page = atmel_nand_read_page;
-		nand_chip->ecc.bytes = 4;
+
+		res = devm_request_irq(&pdev->dev, irq, hsmc_interrupt,
+				0, "hsmc", host);
+		if (res) {
+			dev_err(&pdev->dev, "Unable to request HSMC irq %d\n",
+				irq);
+			goto err_nand_ioremap;
+		}
+	} else {
+		res = atmel_nand_set_enable_ready_pins(mtd);
+		if (res)
+			goto err_nand_ioremap;
+
+		nand_chip->cmd_ctrl = atmel_nand_cmd_ctrl;
 	}
 
+	nand_chip->ecc.mode = host->board.ecc_mode;
 	nand_chip->chip_delay = 20;		/* 20us command delay time */
 
-	if (host->board->bus_width_16) {	/* 16-bit bus width */
+	if (host->board.bus_width_16)	/* 16-bit bus width */
 		nand_chip->options |= NAND_BUSWIDTH_16;
-		nand_chip->read_buf = atmel_read_buf16;
-		nand_chip->write_buf = atmel_write_buf16;
-	} else {
-		nand_chip->read_buf = atmel_read_buf;
-		nand_chip->write_buf = atmel_write_buf;
-	}
+
+	nand_chip->read_buf = atmel_read_buf;
+	nand_chip->write_buf = atmel_write_buf;
 
 	platform_set_drvdata(pdev, host);
 	atmel_nand_enable(host);
 
-	if (host->board->det_pin) {
-		if (gpio_get_value(host->board->det_pin)) {
-			printk(KERN_INFO "No SmartMedia card inserted.\n");
+	if (gpio_is_valid(host->board.det_pin)) {
+		res = devm_gpio_request(&pdev->dev,
+				host->board.det_pin, "nand_det");
+		if (res < 0) {
+			dev_err(&pdev->dev,
+				"can't request det gpio %d\n",
+				host->board.det_pin);
+			goto err_no_card;
+		}
+
+		res = gpio_direction_input(host->board.det_pin);
+		if (res < 0) {
+			dev_err(&pdev->dev,
+				"can't request input direction det gpio %d\n",
+				host->board.det_pin);
+			goto err_no_card;
+		}
+
+		if (gpio_get_value(host->board.det_pin)) {
+			dev_info(&pdev->dev, "No SmartMedia card inserted.\n");
 			res = -ENXIO;
 			goto err_no_card;
 		}
 	}
 
-	if (on_flash_bbt) {
-		printk(KERN_INFO "atmel_nand: Use On Flash BBT\n");
-		nand_chip->options |= NAND_USE_FLASH_BBT;
+	if (host->board.on_flash_bbt || on_flash_bbt) {
+		dev_info(&pdev->dev, "Use On Flash BBT\n");
+		nand_chip->bbt_options |= NAND_BBT_USE_FLASH;
 	}
 
+	if (!host->board.has_dma)
+		use_dma = 0;
+
+	if (use_dma) {
+		dma_cap_mask_t mask;
+
+		dma_cap_zero(mask);
+		dma_cap_set(DMA_MEMCPY, mask);
+		host->dma_chan = dma_request_channel(mask, NULL, NULL);
+		if (!host->dma_chan) {
+			dev_err(host->dev, "Failed to request DMA channel\n");
+			use_dma = 0;
+		}
+	}
+	if (use_dma)
+		dev_info(host->dev, "Using %s for DMA transfers.\n",
+					dma_chan_name(host->dma_chan));
+	else
+		dev_info(host->dev, "No DMA support for NAND access.\n");
+
 	/* first scan to find the device and get the page size */
 	if (nand_scan_ident(mtd, 1, NULL)) {
 		res = -ENXIO;
@@ -480,39 +2100,21 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 	}
 
 	if (nand_chip->ecc.mode == NAND_ECC_HW) {
-		/* ECC is calculated for the whole page (1 step) */
-		nand_chip->ecc.size = mtd->writesize;
-
-		/* set ECC page size and oob layout */
-		switch (mtd->writesize) {
-		case 512:
-			nand_chip->ecc.layout = &atmel_oobinfo_small;
-			ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_528);
-			break;
-		case 1024:
-			nand_chip->ecc.layout = &atmel_oobinfo_large;
-			ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_1056);
-			break;
-		case 2048:
-			nand_chip->ecc.layout = &atmel_oobinfo_large;
-			ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_2112);
-			break;
-		case 4096:
-			nand_chip->ecc.layout = &atmel_oobinfo_large;
-			ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_4224);
-			break;
-		default:
-			/* page size not handled by HW ECC */
-			/* switching back to soft ECC */
-			nand_chip->ecc.mode = NAND_ECC_SOFT;
-			nand_chip->ecc.calculate = NULL;
-			nand_chip->ecc.correct = NULL;
-			nand_chip->ecc.hwctl = NULL;
-			nand_chip->ecc.read_page = NULL;
-			nand_chip->ecc.postpad = 0;
-			nand_chip->ecc.prepad = 0;
-			nand_chip->ecc.bytes = 0;
-			break;
+		if (host->has_pmecc)
+			res = atmel_pmecc_nand_init_params(pdev, host);
+		else
+			res = atmel_hw_nand_init_params(pdev, host);
+
+		if (res != 0)
+			goto err_hw_ecc;
+	}
+
+	/* initialize the nfc configuration register */
+	if (host->nfc && host->nfc->use_nfc_sram) {
+		res = nfc_sram_init(mtd);
+		if (res) {
+			host->nfc->use_nfc_sram = false;
+			dev_err(host->dev, "Disable use nfc sram for data transfer.\n");
 		}
 	}
 
@@ -522,52 +2124,30 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 		goto err_scan_tail;
 	}
 
-#ifdef CONFIG_MTD_PARTITIONS
-#ifdef CONFIG_MTD_CMDLINE_PARTS
 	mtd->name = "atmel_nand";
-	num_partitions = parse_mtd_partitions(mtd, part_probes,
-					      &partitions, 0);
-#endif
-	if (num_partitions <= 0 && host->board->partition_info)
-		partitions = host->board->partition_info(mtd->size,
-							 &num_partitions);
-
-	if ((!partitions) || (num_partitions == 0)) {
-		printk(KERN_ERR "atmel_nand: No partitions defined, or unsupported device.\n");
-		res = -ENXIO;
-		goto err_no_partitions;
-	}
-
-	res = add_mtd_partitions(mtd, partitions, num_partitions);
-#else
-	res = add_mtd_device(mtd);
-#endif
-
+	ppdata.of_node = pdev->dev.of_node;
+	res = mtd_device_parse_register(mtd, NULL, &ppdata,
+			host->board.parts, host->board.num_parts);
 	if (!res)
 		return res;
 
-#ifdef CONFIG_MTD_PARTITIONS
-err_no_partitions:
-#endif
-	nand_release(mtd);
 err_scan_tail:
+	if (host->has_pmecc && host->nand_chip.ecc.mode == NAND_ECC_HW)
+		pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
+err_hw_ecc:
 err_scan_ident:
 err_no_card:
 	atmel_nand_disable(host);
-	platform_set_drvdata(pdev, NULL);
-	if (host->ecc)
-		iounmap(host->ecc);
-err_ecc_ioremap:
-	iounmap(host->io_base);
+	if (host->dma_chan)
+		dma_release_channel(host->dma_chan);
 err_nand_ioremap:
-	kfree(host);
 	return res;
 }
 
 /*
  * Remove a NAND device.
  */
-static int __exit atmel_nand_remove(struct platform_device *pdev)
+static int atmel_nand_remove(struct platform_device *pdev)
 {
 	struct atmel_nand_host *host = platform_get_drvdata(pdev);
 	struct mtd_info *mtd = &host->mtd;
@@ -576,36 +2156,90 @@ static int __exit atmel_nand_remove(struct platform_device *pdev)
 
 	atmel_nand_disable(host);
 
-	if (host->ecc)
-		iounmap(host->ecc);
-	iounmap(host->io_base);
-	kfree(host);
+	if (host->has_pmecc && host->nand_chip.ecc.mode == NAND_ECC_HW) {
+		pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
+		pmerrloc_writel(host->pmerrloc_base, ELDIS,
+				PMERRLOC_DISABLE);
+	}
+
+	if (host->dma_chan)
+		dma_release_channel(host->dma_chan);
+
+	platform_driver_unregister(&atmel_nand_nfc_driver);
 
 	return 0;
 }
 
-static struct platform_driver atmel_nand_driver = {
-	.remove		= __exit_p(atmel_nand_remove),
-	.driver		= {
-		.name	= "atmel_nand",
-		.owner	= THIS_MODULE,
-	},
+static const struct of_device_id atmel_nand_dt_ids[] = {
+	{ .compatible = "atmel,at91rm9200-nand" },
+	{ /* sentinel */ }
 };
 
-static int __init atmel_nand_init(void)
+MODULE_DEVICE_TABLE(of, atmel_nand_dt_ids);
+
+static int atmel_nand_nfc_probe(struct platform_device *pdev)
 {
-	return platform_driver_probe(&atmel_nand_driver, atmel_nand_probe);
+	struct atmel_nfc *nfc = &nand_nfc;
+	struct resource *nfc_cmd_regs, *nfc_hsmc_regs, *nfc_sram;
+
+	nfc_cmd_regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	nfc->base_cmd_regs = devm_ioremap_resource(&pdev->dev, nfc_cmd_regs);
+	if (IS_ERR(nfc->base_cmd_regs))
+		return PTR_ERR(nfc->base_cmd_regs);
+
+	nfc_hsmc_regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	nfc->hsmc_regs = devm_ioremap_resource(&pdev->dev, nfc_hsmc_regs);
+	if (IS_ERR(nfc->hsmc_regs))
+		return PTR_ERR(nfc->hsmc_regs);
+
+	nfc_sram = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+	if (nfc_sram) {
+		nfc->sram_bank0 = devm_ioremap_resource(&pdev->dev, nfc_sram);
+		if (IS_ERR(nfc->sram_bank0)) {
+			dev_warn(&pdev->dev, "Fail to ioremap the NFC sram with error: %ld. So disable NFC sram.\n",
+					PTR_ERR(nfc->sram_bank0));
+		} else {
+			nfc->use_nfc_sram = true;
+			nfc->sram_bank0_phys = (dma_addr_t)nfc_sram->start;
+
+			if (pdev->dev.of_node)
+				nfc->write_by_sram = of_property_read_bool(
+						pdev->dev.of_node,
+						"atmel,write-by-sram");
+		}
+	}
+
+	nfc->is_initialized = true;
+	dev_info(&pdev->dev, "NFC is probed.\n");
+	return 0;
 }
 
+static const struct of_device_id atmel_nand_nfc_match[] = {
+	{ .compatible = "atmel,sama5d3-nfc" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, atmel_nand_nfc_match);
 
-static void __exit atmel_nand_exit(void)
-{
-	platform_driver_unregister(&atmel_nand_driver);
-}
+static struct platform_driver atmel_nand_nfc_driver = {
+	.driver = {
+		.name = "atmel_nand_nfc",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(atmel_nand_nfc_match),
+	},
+	.probe = atmel_nand_nfc_probe,
+};
 
+static struct platform_driver atmel_nand_driver = {
+	.probe		= atmel_nand_probe,
+	.remove		= atmel_nand_remove,
+	.driver		= {
+		.name	= "atmel_nand",
+		.owner	= THIS_MODULE,
+		.of_match_table	= of_match_ptr(atmel_nand_dt_ids),
+	},
+};
 
-module_init(atmel_nand_init);
-module_exit(atmel_nand_exit);
+module_platform_driver(atmel_nand_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Rick Bronson");
diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h
index 578c776e135..8a1e9a68675 100644
--- a/drivers/mtd/nand/atmel_nand_ecc.h
+++ b/drivers/mtd/nand/atmel_nand_ecc.h
@@ -3,7 +3,7 @@
  * Based on AT91SAM9260 datasheet revision B.
  *
  * Copyright (C) 2007 Andrew Victor
- * Copyright (C) 2007 Atmel Corporation.
+ * Copyright (C) 2007 - 2012 Atmel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -36,4 +36,116 @@
 #define ATMEL_ECC_NPR		0x10			/* NParity register */
 #define		ATMEL_ECC_NPARITY	(0xffff << 0)		/* NParity */
 
+/* PMECC Register Definitions */
+#define ATMEL_PMECC_CFG			0x000	/* Configuration Register */
+#define		PMECC_CFG_BCH_ERR2		(0 << 0)
+#define		PMECC_CFG_BCH_ERR4		(1 << 0)
+#define		PMECC_CFG_BCH_ERR8		(2 << 0)
+#define		PMECC_CFG_BCH_ERR12		(3 << 0)
+#define		PMECC_CFG_BCH_ERR24		(4 << 0)
+
+#define		PMECC_CFG_SECTOR512		(0 << 4)
+#define		PMECC_CFG_SECTOR1024		(1 << 4)
+
+#define		PMECC_CFG_PAGE_1SECTOR		(0 << 8)
+#define		PMECC_CFG_PAGE_2SECTORS		(1 << 8)
+#define		PMECC_CFG_PAGE_4SECTORS		(2 << 8)
+#define		PMECC_CFG_PAGE_8SECTORS		(3 << 8)
+
+#define		PMECC_CFG_READ_OP		(0 << 12)
+#define		PMECC_CFG_WRITE_OP		(1 << 12)
+
+#define		PMECC_CFG_SPARE_ENABLE		(1 << 16)
+#define		PMECC_CFG_SPARE_DISABLE		(0 << 16)
+
+#define		PMECC_CFG_AUTO_ENABLE		(1 << 20)
+#define		PMECC_CFG_AUTO_DISABLE		(0 << 20)
+
+#define ATMEL_PMECC_SAREA		0x004	/* Spare area size */
+#define ATMEL_PMECC_SADDR		0x008	/* PMECC starting address */
+#define ATMEL_PMECC_EADDR		0x00c	/* PMECC ending address */
+#define ATMEL_PMECC_CLK			0x010	/* PMECC clock control */
+#define		PMECC_CLK_133MHZ		(2 << 0)
+
+#define ATMEL_PMECC_CTRL		0x014	/* PMECC control register */
+#define		PMECC_CTRL_RST			(1 << 0)
+#define		PMECC_CTRL_DATA			(1 << 1)
+#define		PMECC_CTRL_USER			(1 << 2)
+#define		PMECC_CTRL_ENABLE		(1 << 4)
+#define		PMECC_CTRL_DISABLE		(1 << 5)
+
+#define ATMEL_PMECC_SR			0x018	/* PMECC status register */
+#define		PMECC_SR_BUSY			(1 << 0)
+#define		PMECC_SR_ENABLE			(1 << 4)
+
+#define ATMEL_PMECC_IER			0x01c	/* PMECC interrupt enable */
+#define		PMECC_IER_ENABLE		(1 << 0)
+#define ATMEL_PMECC_IDR			0x020	/* PMECC interrupt disable */
+#define		PMECC_IER_DISABLE		(1 << 0)
+#define ATMEL_PMECC_IMR			0x024	/* PMECC interrupt mask */
+#define		PMECC_IER_MASK			(1 << 0)
+#define ATMEL_PMECC_ISR			0x028	/* PMECC interrupt status */
+#define ATMEL_PMECC_ECCx		0x040	/* PMECC ECC x */
+#define ATMEL_PMECC_REMx		0x240	/* PMECC REM x */
+
+/* PMERRLOC Register Definitions */
+#define ATMEL_PMERRLOC_ELCFG		0x000	/* Error location config */
+#define		PMERRLOC_ELCFG_SECTOR_512	(0 << 0)
+#define		PMERRLOC_ELCFG_SECTOR_1024	(1 << 0)
+#define		PMERRLOC_ELCFG_NUM_ERRORS(n)	((n) << 16)
+
+#define ATMEL_PMERRLOC_ELPRIM		0x004	/* Error location primitive */
+#define ATMEL_PMERRLOC_ELEN		0x008	/* Error location enable */
+#define ATMEL_PMERRLOC_ELDIS		0x00c	/* Error location disable */
+#define		PMERRLOC_DISABLE		(1 << 0)
+
+#define ATMEL_PMERRLOC_ELSR		0x010	/* Error location status */
+#define		PMERRLOC_ELSR_BUSY		(1 << 0)
+#define ATMEL_PMERRLOC_ELIER		0x014	/* Error location int enable */
+#define ATMEL_PMERRLOC_ELIDR		0x018	/* Error location int disable */
+#define ATMEL_PMERRLOC_ELIMR		0x01c	/* Error location int mask */
+#define ATMEL_PMERRLOC_ELISR		0x020	/* Error location int status */
+#define		PMERRLOC_ERR_NUM_MASK		(0x1f << 8)
+#define		PMERRLOC_CALC_DONE		(1 << 0)
+#define ATMEL_PMERRLOC_SIGMAx		0x028	/* Error location SIGMA x */
+#define ATMEL_PMERRLOC_ELx		0x08c	/* Error location x */
+
+/* Register access macros for PMECC */
+#define pmecc_readl_relaxed(addr, reg) \
+	readl_relaxed((addr) + ATMEL_PMECC_##reg)
+
+#define pmecc_writel(addr, reg, value) \
+	writel((value), (addr) + ATMEL_PMECC_##reg)
+
+#define pmecc_readb_ecc_relaxed(addr, sector, n) \
+	readb_relaxed((addr) + ATMEL_PMECC_ECCx + ((sector) * 0x40) + (n))
+
+#define pmecc_readl_rem_relaxed(addr, sector, n) \
+	readl_relaxed((addr) + ATMEL_PMECC_REMx + ((sector) * 0x40) + ((n) * 4))
+
+#define pmerrloc_readl_relaxed(addr, reg) \
+	readl_relaxed((addr) + ATMEL_PMERRLOC_##reg)
+
+#define pmerrloc_writel(addr, reg, value) \
+	writel((value), (addr) + ATMEL_PMERRLOC_##reg)
+
+#define pmerrloc_writel_sigma_relaxed(addr, n, value) \
+	writel_relaxed((value), (addr) + ATMEL_PMERRLOC_SIGMAx + ((n) * 4))
+
+#define pmerrloc_readl_sigma_relaxed(addr, n) \
+	readl_relaxed((addr) + ATMEL_PMERRLOC_SIGMAx + ((n) * 4))
+
+#define pmerrloc_readl_el_relaxed(addr, n) \
+	readl_relaxed((addr) + ATMEL_PMERRLOC_ELx + ((n) * 4))
+
+/* Galois field dimension */
+#define PMECC_GF_DIMENSION_13			13
+#define PMECC_GF_DIMENSION_14			14
+
+#define PMECC_LOOKUP_TABLE_SIZE_512		0x2000
+#define PMECC_LOOKUP_TABLE_SIZE_1024		0x4000
+
+/* Time out value for reading PMECC status register */
+#define PMECC_MAX_TIMEOUT_MS			100
+
 #endif
diff --git a/drivers/mtd/nand/atmel_nand_nfc.h b/drivers/mtd/nand/atmel_nand_nfc.h
new file mode 100644
index 00000000000..4efd117cd3a
--- /dev/null
+++ b/drivers/mtd/nand/atmel_nand_nfc.h
@@ -0,0 +1,98 @@
+/*
+ * Atmel Nand Flash Controller (NFC) - System peripherals regsters.
+ * Based on SAMA5D3 datasheet.
+ *
+ * © Copyright 2013 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef ATMEL_NAND_NFC_H
+#define ATMEL_NAND_NFC_H
+
+/*
+ * HSMC NFC registers
+ */
+#define ATMEL_HSMC_NFC_CFG	0x00		/* NFC Configuration Register */
+#define		NFC_CFG_PAGESIZE	(7 << 0)
+#define			NFC_CFG_PAGESIZE_512	(0 << 0)
+#define			NFC_CFG_PAGESIZE_1024	(1 << 0)
+#define			NFC_CFG_PAGESIZE_2048	(2 << 0)
+#define			NFC_CFG_PAGESIZE_4096	(3 << 0)
+#define			NFC_CFG_PAGESIZE_8192	(4 << 0)
+#define		NFC_CFG_WSPARE		(1 << 8)
+#define		NFC_CFG_RSPARE		(1 << 9)
+#define		NFC_CFG_NFC_DTOCYC	(0xf << 16)
+#define		NFC_CFG_NFC_DTOMUL	(0x7 << 20)
+#define		NFC_CFG_NFC_SPARESIZE	(0x7f << 24)
+#define		NFC_CFG_NFC_SPARESIZE_BIT_POS	24
+
+#define ATMEL_HSMC_NFC_CTRL	0x04		/* NFC Control Register */
+#define		NFC_CTRL_ENABLE		(1 << 0)
+#define		NFC_CTRL_DISABLE	(1 << 1)
+
+#define ATMEL_HSMC_NFC_SR	0x08		/* NFC Status Register */
+#define		NFC_SR_XFR_DONE		(1 << 16)
+#define		NFC_SR_CMD_DONE		(1 << 17)
+#define		NFC_SR_RB_EDGE		(1 << 24)
+
+#define ATMEL_HSMC_NFC_IER	0x0c
+#define ATMEL_HSMC_NFC_IDR	0x10
+#define ATMEL_HSMC_NFC_IMR	0x14
+#define ATMEL_HSMC_NFC_CYCLE0	0x18		/* NFC Address Cycle Zero */
+#define		ATMEL_HSMC_NFC_ADDR_CYCLE0	(0xff)
+
+#define ATMEL_HSMC_NFC_BANK	0x1c		/* NFC Bank Register */
+#define		ATMEL_HSMC_NFC_BANK0		(0 << 0)
+#define		ATMEL_HSMC_NFC_BANK1		(1 << 0)
+
+#define nfc_writel(addr, reg, value) \
+	writel((value), (addr) + ATMEL_HSMC_NFC_##reg)
+
+#define nfc_readl(addr, reg) \
+	readl_relaxed((addr) + ATMEL_HSMC_NFC_##reg)
+
+/*
+ * NFC Address Command definitions
+ */
+#define NFCADDR_CMD_CMD1	(0xff << 2)	/* Command for Cycle 1 */
+#define NFCADDR_CMD_CMD1_BIT_POS	2
+#define NFCADDR_CMD_CMD2	(0xff << 10)	/* Command for Cycle 2 */
+#define NFCADDR_CMD_CMD2_BIT_POS	10
+#define NFCADDR_CMD_VCMD2	(0x1 << 18)	/* Valid Cycle 2 Command */
+#define NFCADDR_CMD_ACYCLE	(0x7 << 19)	/* Number of Address required */
+#define		NFCADDR_CMD_ACYCLE_NONE		(0x0 << 19)
+#define		NFCADDR_CMD_ACYCLE_1		(0x1 << 19)
+#define		NFCADDR_CMD_ACYCLE_2		(0x2 << 19)
+#define		NFCADDR_CMD_ACYCLE_3		(0x3 << 19)
+#define		NFCADDR_CMD_ACYCLE_4		(0x4 << 19)
+#define		NFCADDR_CMD_ACYCLE_5		(0x5 << 19)
+#define NFCADDR_CMD_ACYCLE_BIT_POS	19
+#define NFCADDR_CMD_CSID	(0x7 << 22)	/* Chip Select Identifier */
+#define		NFCADDR_CMD_CSID_0		(0x0 << 22)
+#define		NFCADDR_CMD_CSID_1		(0x1 << 22)
+#define		NFCADDR_CMD_CSID_2		(0x2 << 22)
+#define		NFCADDR_CMD_CSID_3		(0x3 << 22)
+#define		NFCADDR_CMD_CSID_4		(0x4 << 22)
+#define		NFCADDR_CMD_CSID_5		(0x5 << 22)
+#define		NFCADDR_CMD_CSID_6		(0x6 << 22)
+#define		NFCADDR_CMD_CSID_7		(0x7 << 22)
+#define NFCADDR_CMD_DATAEN	(0x1 << 25)	/* Data Transfer Enable */
+#define NFCADDR_CMD_DATADIS	(0x0 << 25)	/* Data Transfer Disable */
+#define NFCADDR_CMD_NFCRD	(0x0 << 26)	/* NFC Read Enable */
+#define NFCADDR_CMD_NFCWR	(0x1 << 26)	/* NFC Write Enable */
+#define NFCADDR_CMD_NFCBUSY	(0x1 << 27)	/* NFC Busy */
+
+#define nfc_cmd_addr1234_writel(cmd, addr1234, nfc_base) \
+	writel((addr1234), (cmd) + nfc_base)
+
+#define nfc_cmd_readl(bitstatus, nfc_base) \
+	readl_relaxed((bitstatus) + nfc_base)
+
+#define NFC_TIME_OUT_MS		100
+#define	NFC_SRAM_BANK1_OFFSET	0x1200
+
+#endif
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 3ffe05db492..bc5c518828d 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -10,44 +10,32 @@
  */
 
 #include <linux/slab.h>
-#include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
 #include <asm/io.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1550nd.h>
 
-#include <asm/mach-au1x00/au1xxx.h>
-#include <asm/mach-db1x00/bcsr.h>
 
-/*
- * MTD structure for NAND controller
- */
-static struct mtd_info *au1550_mtd = NULL;
-static void __iomem *p_nand;
-static int nand_width = 1;	/* default x8 */
-static void (*au1550_write_byte)(struct mtd_info *, u_char);
+struct au1550nd_ctx {
+	struct mtd_info info;
+	struct nand_chip chip;
 
-/*
- * Define partitions for flash device
- */
-static const struct mtd_partition partition_info[] = {
-	{
-	 .name = "NAND FS 0",
-	 .offset = 0,
-	 .size = 8 * 1024 * 1024},
-	{
-	 .name = "NAND FS 1",
-	 .offset = MTDPART_OFS_APPEND,
-	 .size = MTDPART_SIZ_FULL}
+	int cs;
+	void __iomem *base;
+	void (*write_byte)(struct mtd_info *, u_char);
 };
 
 /**
  * au_read_byte -  read one byte from the chip
  * @mtd:	MTD device structure
  *
- *  read function for 8bit buswith
+ * read function for 8bit buswidth
  */
 static u_char au_read_byte(struct mtd_info *mtd)
 {
@@ -62,7 +50,7 @@ static u_char au_read_byte(struct mtd_info *mtd)
  * @mtd:	MTD device structure
  * @byte:	pointer to data byte to write
  *
- *  write function for 8it buswith
+ * write function for 8it buswidth
  */
 static void au_write_byte(struct mtd_info *mtd, u_char byte)
 {
@@ -72,11 +60,10 @@ static void au_write_byte(struct mtd_info *mtd, u_char byte)
 }
 
 /**
- * au_read_byte16 -  read one byte endianess aware from the chip
+ * au_read_byte16 -  read one byte endianness aware from the chip
  * @mtd:	MTD device structure
  *
- *  read function for 16bit buswith with
- * endianess conversion
+ * read function for 16bit buswidth with endianness conversion
  */
 static u_char au_read_byte16(struct mtd_info *mtd)
 {
@@ -87,12 +74,11 @@ static u_char au_read_byte16(struct mtd_info *mtd)
 }
 
 /**
- * au_write_byte16 -  write one byte endianess aware to the chip
+ * au_write_byte16 -  write one byte endianness aware to the chip
  * @mtd:	MTD device structure
  * @byte:	pointer to data byte to write
  *
- *  write function for 16bit buswith with
- * endianess conversion
+ * write function for 16bit buswidth with endianness conversion
  */
 static void au_write_byte16(struct mtd_info *mtd, u_char byte)
 {
@@ -105,8 +91,7 @@ static void au_write_byte16(struct mtd_info *mtd, u_char byte)
  * au_read_word -  read one word from the chip
  * @mtd:	MTD device structure
  *
- *  read function for 16bit buswith without
- * endianess conversion
+ * read function for 16bit buswidth without endianness conversion
  */
 static u16 au_read_word(struct mtd_info *mtd)
 {
@@ -122,7 +107,7 @@ static u16 au_read_word(struct mtd_info *mtd)
  * @buf:	data buffer
  * @len:	number of bytes to write
  *
- *  write function for 8bit buswith
+ * write function for 8bit buswidth
  */
 static void au_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
 {
@@ -141,7 +126,7 @@ static void au_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
  * @buf:	buffer to store date
  * @len:	number of bytes to read
  *
- *  read function for 8bit buswith
+ * read function for 8bit buswidth
  */
 static void au_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 {
@@ -155,34 +140,12 @@ static void au_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 }
 
 /**
- * au_verify_buf -  Verify chip data against buffer
- * @mtd:	MTD device structure
- * @buf:	buffer containing the data to compare
- * @len:	number of bytes to compare
- *
- *  verify function for 8bit buswith
- */
-static int au_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
-{
-	int i;
-	struct nand_chip *this = mtd->priv;
-
-	for (i = 0; i < len; i++) {
-		if (buf[i] != readb(this->IO_ADDR_R))
-			return -EFAULT;
-		au_sync();
-	}
-
-	return 0;
-}
-
-/**
  * au_write_buf16 -  write buffer to chip
  * @mtd:	MTD device structure
  * @buf:	data buffer
  * @len:	number of bytes to write
  *
- *  write function for 16bit buswith
+ * write function for 16bit buswidth
  */
 static void au_write_buf16(struct mtd_info *mtd, const u_char *buf, int len)
 {
@@ -204,7 +167,7 @@ static void au_write_buf16(struct mtd_info *mtd, const u_char *buf, int len)
  * @buf:	buffer to store date
  * @len:	number of bytes to read
  *
- *  read function for 16bit buswith
+ * read function for 16bit buswidth
  */
 static void au_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
 {
@@ -219,29 +182,6 @@ static void au_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
 	}
 }
 
-/**
- * au_verify_buf16 -  Verify chip data against buffer
- * @mtd:	MTD device structure
- * @buf:	buffer containing the data to compare
- * @len:	number of bytes to compare
- *
- *  verify function for 16bit buswith
- */
-static int au_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len)
-{
-	int i;
-	struct nand_chip *this = mtd->priv;
-	u16 *p = (u16 *) buf;
-	len >>= 1;
-
-	for (i = 0; i < len; i++) {
-		if (p[i] != readw(this->IO_ADDR_R))
-			return -EFAULT;
-		au_sync();
-	}
-	return 0;
-}
-
 /* Select the chip by setting nCE to low */
 #define NAND_CTL_SETNCE		1
 /* Deselect the chip by setting nCE to high */
@@ -257,24 +197,25 @@ static int au_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len)
 
 static void au1550_hwcontrol(struct mtd_info *mtd, int cmd)
 {
-	register struct nand_chip *this = mtd->priv;
+	struct au1550nd_ctx *ctx = container_of(mtd, struct au1550nd_ctx, info);
+	struct nand_chip *this = mtd->priv;
 
 	switch (cmd) {
 
 	case NAND_CTL_SETCLE:
-		this->IO_ADDR_W = p_nand + MEM_STNAND_CMD;
+		this->IO_ADDR_W = ctx->base + MEM_STNAND_CMD;
 		break;
 
 	case NAND_CTL_CLRCLE:
-		this->IO_ADDR_W = p_nand + MEM_STNAND_DATA;
+		this->IO_ADDR_W = ctx->base + MEM_STNAND_DATA;
 		break;
 
 	case NAND_CTL_SETALE:
-		this->IO_ADDR_W = p_nand + MEM_STNAND_ADDR;
+		this->IO_ADDR_W = ctx->base + MEM_STNAND_ADDR;
 		break;
 
 	case NAND_CTL_CLRALE:
-		this->IO_ADDR_W = p_nand + MEM_STNAND_DATA;
+		this->IO_ADDR_W = ctx->base + MEM_STNAND_DATA;
 		/* FIXME: Nobody knows why this is necessary,
 		 * but it works only that way */
 		udelay(1);
@@ -282,7 +223,7 @@ static void au1550_hwcontrol(struct mtd_info *mtd, int cmd)
 
 	case NAND_CTL_SETNCE:
 		/* assert (force assert) chip enable */
-		au_writel((1 << (4 + NAND_CS)), MEM_STNDCTL);
+		au_writel((1 << (4 + ctx->cs)), MEM_STNDCTL);
 		break;
 
 	case NAND_CTL_CLRNCE:
@@ -329,9 +270,10 @@ static void au1550_select_chip(struct mtd_info *mtd, int chip)
  */
 static void au1550_command(struct mtd_info *mtd, unsigned command, int column, int page_addr)
 {
-	register struct nand_chip *this = mtd->priv;
+	struct au1550nd_ctx *ctx = container_of(mtd, struct au1550nd_ctx, info);
+	struct nand_chip *this = mtd->priv;
 	int ce_override = 0, i;
-	ulong flags;
+	unsigned long flags = 0;
 
 	/* Begin command latch cycle */
 	au1550_hwcontrol(mtd, NAND_CTL_SETCLE);
@@ -352,9 +294,9 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i
 			column -= 256;
 			readcmd = NAND_CMD_READ1;
 		}
-		au1550_write_byte(mtd, readcmd);
+		ctx->write_byte(mtd, readcmd);
 	}
-	au1550_write_byte(mtd, command);
+	ctx->write_byte(mtd, command);
 
 	/* Set ALE and clear CLE to start address cycle */
 	au1550_hwcontrol(mtd, NAND_CTL_CLRCLE);
@@ -365,12 +307,13 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i
 		/* Serially input address */
 		if (column != -1) {
 			/* Adjust columns for 16 bit buswidth */
-			if (this->options & NAND_BUSWIDTH_16)
+			if (this->options & NAND_BUSWIDTH_16 &&
+					!nand_opcode_8bits(command))
 				column >>= 1;
-			au1550_write_byte(mtd, column);
+			ctx->write_byte(mtd, column);
 		}
 		if (page_addr != -1) {
-			au1550_write_byte(mtd, (u8)(page_addr & 0xff));
+			ctx->write_byte(mtd, (u8)(page_addr & 0xff));
 
 			if (command == NAND_CMD_READ0 ||
 			    command == NAND_CMD_READ1 ||
@@ -388,11 +331,12 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i
 				au1550_hwcontrol(mtd, NAND_CTL_SETNCE);
 			}
 
-			au1550_write_byte(mtd, (u8)(page_addr >> 8));
+			ctx->write_byte(mtd, (u8)(page_addr >> 8));
 
 			/* One more address cycle for devices > 32MiB */
 			if (this->chipsize > (32 << 20))
-				au1550_write_byte(mtd, (u8)((page_addr >> 16) & 0x0f));
+				ctx->write_byte(mtd,
+						((page_addr >> 16) & 0x0f));
 		}
 		/* Latch in address */
 		au1550_hwcontrol(mtd, NAND_CTL_CLRALE);
@@ -438,121 +382,77 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i
 	while(!this->dev_ready(mtd));
 }
 
-
-/*
- * Main initialization routine
- */
-static int __init au1xxx_nand_init(void)
+static int find_nand_cs(unsigned long nand_base)
 {
-	struct nand_chip *this;
-	u16 boot_swapboot = 0;	/* default value */
-	int retval;
-	u32 mem_staddr;
-	u32 nand_phys;
-
-	/* Allocate memory for MTD device structure and private data */
-	au1550_mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
-	if (!au1550_mtd) {
-		printk("Unable to allocate NAND MTD dev structure.\n");
-		return -ENOMEM;
-	}
-
-	/* Get pointer to private data */
-	this = (struct nand_chip *)(&au1550_mtd[1]);
+	void __iomem *base =
+			(void __iomem *)KSEG1ADDR(AU1000_STATIC_MEM_PHYS_ADDR);
+	unsigned long addr, staddr, start, mask, end;
+	int i;
 
-	/* Link the private data with the MTD structure */
-	au1550_mtd->priv = this;
-	au1550_mtd->owner = THIS_MODULE;
+	for (i = 0; i < 4; i++) {
+		addr = 0x1000 + (i * 0x10);			/* CSx */
+		staddr = __raw_readl(base + addr + 0x08);	/* STADDRx */
+		/* figure out the decoded range of this CS */
+		start = (staddr << 4) & 0xfffc0000;
+		mask = (staddr << 18) & 0xfffc0000;
+		end = (start | (start - 1)) & ~(start ^ mask);
+		if ((nand_base >= start) && (nand_base < end))
+			return i;
+	}
 
+	return -ENODEV;
+}
 
-	/* MEM_STNDCTL: disable ints, disable nand boot */
-	au_writel(0, MEM_STNDCTL);
+static int au1550nd_probe(struct platform_device *pdev)
+{
+	struct au1550nd_platdata *pd;
+	struct au1550nd_ctx *ctx;
+	struct nand_chip *this;
+	struct resource *r;
+	int ret, cs;
 
-#ifdef CONFIG_MIPS_PB1550
-	/* set gpio206 high */
-	au_writel(au_readl(GPIO2_DIR) & ~(1 << 6), GPIO2_DIR);
+	pd = dev_get_platdata(&pdev->dev);
+	if (!pd) {
+		dev_err(&pdev->dev, "missing platform data\n");
+		return -ENODEV;
+	}
 
-	boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) | ((bcsr_read(BCSR_STATUS) >> 6) & 0x1);
+	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
 
-	switch (boot_swapboot) {
-	case 0:
-	case 2:
-	case 8:
-	case 0xC:
-	case 0xD:
-		/* x16 NAND Flash */
-		nand_width = 0;
-		break;
-	case 1:
-	case 9:
-	case 3:
-	case 0xE:
-	case 0xF:
-		/* x8 NAND Flash */
-		nand_width = 1;
-		break;
-	default:
-		printk("Pb1550 NAND: bad boot:swap\n");
-		retval = -EINVAL;
-		goto outmem;
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r) {
+		dev_err(&pdev->dev, "no NAND memory resource\n");
+		ret = -ENODEV;
+		goto out1;
 	}
-#endif
-
-	/* Configure chip-select; normally done by boot code, e.g. YAMON */
-#ifdef NAND_STCFG
-	if (NAND_CS == 0) {
-		au_writel(NAND_STCFG,  MEM_STCFG0);
-		au_writel(NAND_STTIME, MEM_STTIME0);
-		au_writel(NAND_STADDR, MEM_STADDR0);
+	if (request_mem_region(r->start, resource_size(r), "au1550-nand")) {
+		dev_err(&pdev->dev, "cannot claim NAND memory area\n");
+		ret = -ENOMEM;
+		goto out1;
 	}
-	if (NAND_CS == 1) {
-		au_writel(NAND_STCFG,  MEM_STCFG1);
-		au_writel(NAND_STTIME, MEM_STTIME1);
-		au_writel(NAND_STADDR, MEM_STADDR1);
-	}
-	if (NAND_CS == 2) {
-		au_writel(NAND_STCFG,  MEM_STCFG2);
-		au_writel(NAND_STTIME, MEM_STTIME2);
-		au_writel(NAND_STADDR, MEM_STADDR2);
-	}
-	if (NAND_CS == 3) {
-		au_writel(NAND_STCFG,  MEM_STCFG3);
-		au_writel(NAND_STTIME, MEM_STTIME3);
-		au_writel(NAND_STADDR, MEM_STADDR3);
-	}
-#endif
-
-	/* Locate NAND chip-select in order to determine NAND phys address */
-	mem_staddr = 0x00000000;
-	if (((au_readl(MEM_STCFG0) & 0x7) == 0x5) && (NAND_CS == 0))
-		mem_staddr = au_readl(MEM_STADDR0);
-	else if (((au_readl(MEM_STCFG1) & 0x7) == 0x5) && (NAND_CS == 1))
-		mem_staddr = au_readl(MEM_STADDR1);
-	else if (((au_readl(MEM_STCFG2) & 0x7) == 0x5) && (NAND_CS == 2))
-		mem_staddr = au_readl(MEM_STADDR2);
-	else if (((au_readl(MEM_STCFG3) & 0x7) == 0x5) && (NAND_CS == 3))
-		mem_staddr = au_readl(MEM_STADDR3);
-
-	if (mem_staddr == 0x00000000) {
-		printk("Au1xxx NAND: ERROR WITH NAND CHIP-SELECT\n");
-		kfree(au1550_mtd);
-		return 1;
+
+	ctx->base = ioremap_nocache(r->start, 0x1000);
+	if (!ctx->base) {
+		dev_err(&pdev->dev, "cannot remap NAND memory area\n");
+		ret = -ENODEV;
+		goto out2;
 	}
-	nand_phys = (mem_staddr << 4) & 0xFFFC0000;
 
-	p_nand = ioremap(nand_phys, 0x1000);
+	this = &ctx->chip;
+	ctx->info.priv = this;
+	ctx->info.owner = THIS_MODULE;
 
-	/* make controller and MTD agree */
-	if (NAND_CS == 0)
-		nand_width = au_readl(MEM_STCFG0) & (1 << 22);
-	if (NAND_CS == 1)
-		nand_width = au_readl(MEM_STCFG1) & (1 << 22);
-	if (NAND_CS == 2)
-		nand_width = au_readl(MEM_STCFG2) & (1 << 22);
-	if (NAND_CS == 3)
-		nand_width = au_readl(MEM_STCFG3) & (1 << 22);
+	/* figure out which CS# r->start belongs to */
+	cs = find_nand_cs(r->start);
+	if (cs < 0) {
+		dev_err(&pdev->dev, "cannot detect NAND chipselect\n");
+		ret = -ENODEV;
+		goto out3;
+	}
+	ctx->cs = cs;
 
-	/* Set address of hardware control function */
 	this->dev_ready = au1550_device_ready;
 	this->select_chip = au1550_select_chip;
 	this->cmdfunc = au1550_command;
@@ -561,55 +461,58 @@ static int __init au1xxx_nand_init(void)
 	this->chip_delay = 30;
 	this->ecc.mode = NAND_ECC_SOFT;
 
-	this->options = NAND_NO_AUTOINCR;
-
-	if (!nand_width)
+	if (pd->devwidth)
 		this->options |= NAND_BUSWIDTH_16;
 
-	this->read_byte = (!nand_width) ? au_read_byte16 : au_read_byte;
-	au1550_write_byte = (!nand_width) ? au_write_byte16 : au_write_byte;
+	this->read_byte = (pd->devwidth) ? au_read_byte16 : au_read_byte;
+	ctx->write_byte = (pd->devwidth) ? au_write_byte16 : au_write_byte;
 	this->read_word = au_read_word;
-	this->write_buf = (!nand_width) ? au_write_buf16 : au_write_buf;
-	this->read_buf = (!nand_width) ? au_read_buf16 : au_read_buf;
-	this->verify_buf = (!nand_width) ? au_verify_buf16 : au_verify_buf;
-
-	/* Scan to find existence of the device */
-	if (nand_scan(au1550_mtd, 1)) {
-		retval = -ENXIO;
-		goto outio;
+	this->write_buf = (pd->devwidth) ? au_write_buf16 : au_write_buf;
+	this->read_buf = (pd->devwidth) ? au_read_buf16 : au_read_buf;
+
+	ret = nand_scan(&ctx->info, 1);
+	if (ret) {
+		dev_err(&pdev->dev, "NAND scan failed with %d\n", ret);
+		goto out3;
 	}
 
-	/* Register the partitions */
-	add_mtd_partitions(au1550_mtd, partition_info, ARRAY_SIZE(partition_info));
+	mtd_device_register(&ctx->info, pd->parts, pd->num_parts);
 
-	return 0;
+	platform_set_drvdata(pdev, ctx);
 
- outio:
-	iounmap(p_nand);
+	return 0;
 
- outmem:
-	kfree(au1550_mtd);
-	return retval;
+out3:
+	iounmap(ctx->base);
+out2:
+	release_mem_region(r->start, resource_size(r));
+out1:
+	kfree(ctx);
+	return ret;
 }
 
-module_init(au1xxx_nand_init);
-
-/*
- * Clean up routine
- */
-static void __exit au1550_cleanup(void)
+static int au1550nd_remove(struct platform_device *pdev)
 {
-	/* Release resources, unregister device */
-	nand_release(au1550_mtd);
+	struct au1550nd_ctx *ctx = platform_get_drvdata(pdev);
+	struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
-	/* Free the MTD device structure */
-	kfree(au1550_mtd);
-
-	/* Unmap */
-	iounmap(p_nand);
+	nand_release(&ctx->info);
+	iounmap(ctx->base);
+	release_mem_region(r->start, 0x1000);
+	kfree(ctx);
+	return 0;
 }
 
-module_exit(au1550_cleanup);
+static struct platform_driver au1550nd_driver = {
+	.driver = {
+		.name	= "au1550-nand",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= au1550nd_probe,
+	.remove		= au1550nd_remove,
+};
+
+module_platform_driver(au1550nd_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Embedded Edge, LLC");
diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c
deleted file mode 100644
index 7c95da1f612..00000000000
--- a/drivers/mtd/nand/autcpu12.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- *  drivers/mtd/autcpu12.c
- *
- *  Copyright (c) 2002 Thomas Gleixner <tgxl@linutronix.de>
- *
- *  Derived from drivers/mtd/spia.c
- *	 Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Overview:
- *   This is a device driver for the NAND flash device found on the
- *   autronix autcpu12 board, which is a SmartMediaCard. It supports
- *   16MiB, 32MiB and 64MiB cards.
- *
- *
- *	02-12-2002 TG	Cleanup of module params
- *
- *	02-20-2002 TG	adjusted for different rd/wr address support
- *			added support for read device ready/busy line
- *			added page_cache
- *
- *	10-06-2002 TG	128K card support added
- */
-
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <asm/io.h>
-#include <mach/hardware.h>
-#include <asm/sizes.h>
-#include <mach/autcpu12.h>
-
-/*
- * MTD structure for AUTCPU12 board
- */
-static struct mtd_info *autcpu12_mtd = NULL;
-static void __iomem *autcpu12_fio_base;
-
-/*
- * Define partitions for flash devices
- */
-static struct mtd_partition partition_info16k[] = {
-	{ .name		= "AUTCPU12 flash partition 1",
-	  .offset	= 0,
-	  .size		= 8 * SZ_1M },
-	{ .name		= "AUTCPU12 flash partition 2",
-	  .offset	= 8 * SZ_1M,
-	  .size		= 8 * SZ_1M },
-};
-
-static struct mtd_partition partition_info32k[] = {
-	{ .name		= "AUTCPU12 flash partition 1",
-	  .offset	= 0,
-	  .size		= 8 * SZ_1M },
-	{ .name		= "AUTCPU12 flash partition 2",
-	  .offset	= 8 * SZ_1M,
-	  .size		= 24 * SZ_1M },
-};
-
-static struct mtd_partition partition_info64k[] = {
-	{ .name		= "AUTCPU12 flash partition 1",
-	  .offset	= 0,
-	  .size		= 16 * SZ_1M },
-	{ .name		= "AUTCPU12 flash partition 2",
-	  .offset	= 16 * SZ_1M,
-	  .size		= 48 * SZ_1M },
-};
-
-static struct mtd_partition partition_info128k[] = {
-	{ .name		= "AUTCPU12 flash partition 1",
-	  .offset	= 0,
-	  .size		= 16 * SZ_1M },
-	{ .name		= "AUTCPU12 flash partition 2",
-	  .offset	= 16 * SZ_1M,
-	  .size		= 112 * SZ_1M },
-};
-
-#define NUM_PARTITIONS16K 2
-#define NUM_PARTITIONS32K 2
-#define NUM_PARTITIONS64K 2
-#define NUM_PARTITIONS128K 2
-/*
- *	hardware specific access to control-lines
- *
- *	ALE bit 4 autcpu12_pedr
- *	CLE bit 5 autcpu12_pedr
- *	NCE bit 0 fio_ctrl
- *
- */
-static void autcpu12_hwcontrol(struct mtd_info *mtd, int cmd,
-			       unsigned int ctrl)
-{
-	struct nand_chip *chip = mtd->priv;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		void __iomem *addr;
-		unsigned char bits;
-
-		addr = CS89712_VIRT_BASE + AUTCPU12_SMC_PORT_OFFSET;
-		bits = (ctrl & NAND_CLE) << 4;
-		bits |= (ctrl & NAND_ALE) << 2;
-		writeb((readb(addr) & ~0x30) | bits, addr);
-
-		addr = autcpu12_fio_base + AUTCPU12_SMC_SELECT_OFFSET;
-		writeb((readb(addr) & ~0x1) | (ctrl & NAND_NCE), addr);
-	}
-
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, chip->IO_ADDR_W);
-}
-
-/*
- *	read device ready pin
- */
-int autcpu12_device_ready(struct mtd_info *mtd)
-{
-	void __iomem *addr = CS89712_VIRT_BASE + AUTCPU12_SMC_PORT_OFFSET;
-
-	return readb(addr) & AUTCPU12_SMC_RDY;
-}
-
-/*
- * Main initialization routine
- */
-static int __init autcpu12_init(void)
-{
-	struct nand_chip *this;
-	int err = 0;
-
-	/* Allocate memory for MTD device structure and private data */
-	autcpu12_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip),
-			       GFP_KERNEL);
-	if (!autcpu12_mtd) {
-		printk("Unable to allocate AUTCPU12 NAND MTD device structure.\n");
-		err = -ENOMEM;
-		goto out;
-	}
-
-	/* map physical address */
-	autcpu12_fio_base = ioremap(AUTCPU12_PHYS_SMC, SZ_1K);
-	if (!autcpu12_fio_base) {
-		printk("Ioremap autcpu12 SmartMedia Card failed\n");
-		err = -EIO;
-		goto out_mtd;
-	}
-
-	/* Get pointer to private data */
-	this = (struct nand_chip *)(&autcpu12_mtd[1]);
-
-	/* Initialize structures */
-	memset(autcpu12_mtd, 0, sizeof(struct mtd_info));
-	memset(this, 0, sizeof(struct nand_chip));
-
-	/* Link the private data with the MTD structure */
-	autcpu12_mtd->priv = this;
-	autcpu12_mtd->owner = THIS_MODULE;
-
-	/* Set address of NAND IO lines */
-	this->IO_ADDR_R = autcpu12_fio_base;
-	this->IO_ADDR_W = autcpu12_fio_base;
-	this->cmd_ctrl = autcpu12_hwcontrol;
-	this->dev_ready = autcpu12_device_ready;
-	/* 20 us command delay time */
-	this->chip_delay = 20;
-	this->ecc.mode = NAND_ECC_SOFT;
-
-	/* Enable the following for a flash based bad block table */
-	/*
-	   this->options = NAND_USE_FLASH_BBT;
-	 */
-	this->options = NAND_USE_FLASH_BBT;
-
-	/* Scan to find existance of the device */
-	if (nand_scan(autcpu12_mtd, 1)) {
-		err = -ENXIO;
-		goto out_ior;
-	}
-
-	/* Register the partitions */
-	switch (autcpu12_mtd->size) {
-		case SZ_16M:
-			add_mtd_partitions(autcpu12_mtd, partition_info16k,
-					   NUM_PARTITIONS16K);
-			break;
-		case SZ_32M:
-			add_mtd_partitions(autcpu12_mtd, partition_info32k,
-					   NUM_PARTITIONS32K);
-			break;
-		case SZ_64M:
-			add_mtd_partitions(autcpu12_mtd, partition_info64k,
-					   NUM_PARTITIONS64K);
-			break;
-		case SZ_128M:
-			add_mtd_partitions(autcpu12_mtd, partition_info128k,
-					   NUM_PARTITIONS128K);
-			break;
-		default:
-			printk("Unsupported SmartMedia device\n");
-			err = -ENXIO;
-			goto out_ior;
-	}
-	goto out;
-
- out_ior:
-	iounmap(autcpu12_fio_base);
- out_mtd:
-	kfree(autcpu12_mtd);
- out:
-	return err;
-}
-
-module_init(autcpu12_init);
-
-/*
- * Clean up routine
- */
-static void __exit autcpu12_cleanup(void)
-{
-	/* Release resources, unregister device */
-	nand_release(autcpu12_mtd);
-
-	/* unmap physical address */
-	iounmap(autcpu12_fio_base);
-
-	/* Free the MTD device structure */
-	kfree(autcpu12_mtd);
-}
-
-module_exit(autcpu12_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Thomas Gleixner <tglx@linutronix.de>");
-MODULE_DESCRIPTION("Glue layer for SmartMediaCard on autronix autcpu12");
diff --git a/drivers/mtd/nand/bcm47xxnflash/Makefile b/drivers/mtd/nand/bcm47xxnflash/Makefile
new file mode 100644
index 00000000000..f05b119e134
--- /dev/null
+++ b/drivers/mtd/nand/bcm47xxnflash/Makefile
@@ -0,0 +1,4 @@
+bcm47xxnflash-y				+= main.o
+bcm47xxnflash-y				+= ops_bcm4706.o
+
+obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH)	+= bcm47xxnflash.o
diff --git a/drivers/mtd/nand/bcm47xxnflash/bcm47xxnflash.h b/drivers/mtd/nand/bcm47xxnflash/bcm47xxnflash.h
new file mode 100644
index 00000000000..c005a62330b
--- /dev/null
+++ b/drivers/mtd/nand/bcm47xxnflash/bcm47xxnflash.h
@@ -0,0 +1,26 @@
+#ifndef __BCM47XXNFLASH_H
+#define __BCM47XXNFLASH_H
+
+#ifndef pr_fmt
+#define pr_fmt(fmt)		KBUILD_MODNAME ": " fmt
+#endif
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+
+struct bcm47xxnflash {
+	struct bcma_drv_cc *cc;
+
+	struct nand_chip nand_chip;
+	struct mtd_info mtd;
+
+	unsigned curr_command;
+	int curr_page_addr;
+	int curr_column;
+
+	u8 id_data[8];
+};
+
+int bcm47xxnflash_ops_bcm4706_init(struct bcm47xxnflash *b47n);
+
+#endif /* BCM47XXNFLASH */
diff --git a/drivers/mtd/nand/bcm47xxnflash/main.c b/drivers/mtd/nand/bcm47xxnflash/main.c
new file mode 100644
index 00000000000..10744591131
--- /dev/null
+++ b/drivers/mtd/nand/bcm47xxnflash/main.c
@@ -0,0 +1,80 @@
+/*
+ * BCM47XX NAND flash driver
+ *
+ * Copyright (C) 2012 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include "bcm47xxnflash.h"
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/bcma/bcma.h>
+
+MODULE_DESCRIPTION("NAND flash driver for BCMA bus");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Rafał Miłecki");
+
+static const char *probes[] = { "bcm47xxpart", NULL };
+
+static int bcm47xxnflash_probe(struct platform_device *pdev)
+{
+	struct bcma_nflash *nflash = dev_get_platdata(&pdev->dev);
+	struct bcm47xxnflash *b47n;
+	int err = 0;
+
+	b47n = devm_kzalloc(&pdev->dev, sizeof(*b47n), GFP_KERNEL);
+	if (!b47n)
+		return -ENOMEM;
+
+	b47n->nand_chip.priv = b47n;
+	b47n->mtd.owner = THIS_MODULE;
+	b47n->mtd.priv = &b47n->nand_chip; /* Required */
+	b47n->cc = container_of(nflash, struct bcma_drv_cc, nflash);
+
+	if (b47n->cc->core->bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) {
+		err = bcm47xxnflash_ops_bcm4706_init(b47n);
+	} else {
+		pr_err("Device not supported\n");
+		err = -ENOTSUPP;
+	}
+	if (err) {
+		pr_err("Initialization failed: %d\n", err);
+		return err;
+	}
+
+	err = mtd_device_parse_register(&b47n->mtd, probes, NULL, NULL, 0);
+	if (err) {
+		pr_err("Failed to register MTD device: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static int bcm47xxnflash_remove(struct platform_device *pdev)
+{
+	struct bcma_nflash *nflash = dev_get_platdata(&pdev->dev);
+
+	if (nflash->mtd)
+		mtd_device_unregister(nflash->mtd);
+
+	return 0;
+}
+
+static struct platform_driver bcm47xxnflash_driver = {
+	.probe	= bcm47xxnflash_probe,
+	.remove = bcm47xxnflash_remove,
+	.driver = {
+		.name = "bcma_nflash",
+		.owner = THIS_MODULE,
+	},
+};
+
+module_platform_driver(bcm47xxnflash_driver);
diff --git a/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c b/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c
new file mode 100644
index 00000000000..b2ab373c9ee
--- /dev/null
+++ b/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c
@@ -0,0 +1,413 @@
+/*
+ * BCM47XX NAND flash driver
+ *
+ * Copyright (C) 2012 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include "bcm47xxnflash.h"
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/bcma/bcma.h>
+
+/* Broadcom uses 1'000'000 but it seems to be too many. Tests on WNDR4500 has
+ * shown ~1000 retries as maxiumum. */
+#define NFLASH_READY_RETRIES		10000
+
+#define NFLASH_SECTOR_SIZE		512
+
+#define NCTL_CMD0			0x00010000
+#define NCTL_CMD1W			0x00080000
+#define NCTL_READ			0x00100000
+#define NCTL_WRITE			0x00200000
+#define NCTL_SPECADDR			0x01000000
+#define NCTL_READY			0x04000000
+#define NCTL_ERR			0x08000000
+#define NCTL_CSA			0x40000000
+#define NCTL_START			0x80000000
+
+/**************************************************
+ * Various helpers
+ **************************************************/
+
+static inline u8 bcm47xxnflash_ops_bcm4706_ns_to_cycle(u16 ns, u16 clock)
+{
+	return ((ns * 1000 * clock) / 1000000) + 1;
+}
+
+static int bcm47xxnflash_ops_bcm4706_ctl_cmd(struct bcma_drv_cc *cc, u32 code)
+{
+	int i = 0;
+
+	bcma_cc_write32(cc, BCMA_CC_NFLASH_CTL, NCTL_START | code);
+	for (i = 0; i < NFLASH_READY_RETRIES; i++) {
+		if (!(bcma_cc_read32(cc, BCMA_CC_NFLASH_CTL) & NCTL_START)) {
+			i = 0;
+			break;
+		}
+	}
+	if (i) {
+		pr_err("NFLASH control command not ready!\n");
+		return -EBUSY;
+	}
+	return 0;
+}
+
+static int bcm47xxnflash_ops_bcm4706_poll(struct bcma_drv_cc *cc)
+{
+	int i;
+
+	for (i = 0; i < NFLASH_READY_RETRIES; i++) {
+		if (bcma_cc_read32(cc, BCMA_CC_NFLASH_CTL) & NCTL_READY) {
+			if (bcma_cc_read32(cc, BCMA_CC_NFLASH_CTL) &
+			    BCMA_CC_NFLASH_CTL_ERR) {
+				pr_err("Error on polling\n");
+				return -EBUSY;
+			} else {
+				return 0;
+			}
+		}
+	}
+
+	pr_err("Polling timeout!\n");
+	return -EBUSY;
+}
+
+/**************************************************
+ * R/W
+ **************************************************/
+
+static void bcm47xxnflash_ops_bcm4706_read(struct mtd_info *mtd, uint8_t *buf,
+					   int len)
+{
+	struct nand_chip *nand_chip = (struct nand_chip *)mtd->priv;
+	struct bcm47xxnflash *b47n = (struct bcm47xxnflash *)nand_chip->priv;
+
+	u32 ctlcode;
+	u32 *dest = (u32 *)buf;
+	int i;
+	int toread;
+
+	BUG_ON(b47n->curr_page_addr & ~nand_chip->pagemask);
+	/* Don't validate column using nand_chip->page_shift, it may be bigger
+	 * when accessing OOB */
+
+	while (len) {
+		/* We can read maximum of 0x200 bytes at once */
+		toread = min(len, 0x200);
+
+		/* Set page and column */
+		bcma_cc_write32(b47n->cc, BCMA_CC_NFLASH_COL_ADDR,
+				b47n->curr_column);
+		bcma_cc_write32(b47n->cc, BCMA_CC_NFLASH_ROW_ADDR,
+				b47n->curr_page_addr);
+
+		/* Prepare to read */
+		ctlcode = NCTL_CSA | NCTL_CMD1W | 0x00040000 | 0x00020000 |
+			  NCTL_CMD0;
+		ctlcode |= NAND_CMD_READSTART << 8;
+		if (bcm47xxnflash_ops_bcm4706_ctl_cmd(b47n->cc, ctlcode))
+			return;
+		if (bcm47xxnflash_ops_bcm4706_poll(b47n->cc))
+			return;
+
+		/* Eventually read some data :) */
+		for (i = 0; i < toread; i += 4, dest++) {
+			ctlcode = NCTL_CSA | 0x30000000 | NCTL_READ;
+			if (i == toread - 4) /* Last read goes without that */
+				ctlcode &= ~NCTL_CSA;
+			if (bcm47xxnflash_ops_bcm4706_ctl_cmd(b47n->cc,
+							      ctlcode))
+				return;
+			*dest = bcma_cc_read32(b47n->cc, BCMA_CC_NFLASH_DATA);
+		}
+
+		b47n->curr_column += toread;
+		len -= toread;
+	}
+}
+
+static void bcm47xxnflash_ops_bcm4706_write(struct mtd_info *mtd,
+					    const uint8_t *buf, int len)
+{
+	struct nand_chip *nand_chip = (struct nand_chip *)mtd->priv;
+	struct bcm47xxnflash *b47n = (struct bcm47xxnflash *)nand_chip->priv;
+	struct bcma_drv_cc *cc = b47n->cc;
+
+	u32 ctlcode;
+	const u32 *data = (u32 *)buf;
+	int i;
+
+	BUG_ON(b47n->curr_page_addr & ~nand_chip->pagemask);
+	/* Don't validate column using nand_chip->page_shift, it may be bigger
+	 * when accessing OOB */
+
+	for (i = 0; i < len; i += 4, data++) {
+		bcma_cc_write32(cc, BCMA_CC_NFLASH_DATA, *data);
+
+		ctlcode = NCTL_CSA | 0x30000000 | NCTL_WRITE;
+		if (i == len - 4) /* Last read goes without that */
+			ctlcode &= ~NCTL_CSA;
+		if (bcm47xxnflash_ops_bcm4706_ctl_cmd(cc, ctlcode)) {
+			pr_err("%s ctl_cmd didn't work!\n", __func__);
+			return;
+		}
+	}
+
+	b47n->curr_column += len;
+}
+
+/**************************************************
+ * NAND chip ops
+ **************************************************/
+
+/* Default nand_select_chip calls cmd_ctrl, which is not used in BCM4706 */
+static void bcm47xxnflash_ops_bcm4706_select_chip(struct mtd_info *mtd,
+						  int chip)
+{
+	return;
+}
+
+/*
+ * Default nand_command and nand_command_lp don't match BCM4706 hardware layout.
+ * For example, reading chip id is performed in a non-standard way.
+ * Setting column and page is also handled differently, we use a special
+ * registers of ChipCommon core. Hacking cmd_ctrl to understand and convert
+ * standard commands would be much more complicated.
+ */
+static void bcm47xxnflash_ops_bcm4706_cmdfunc(struct mtd_info *mtd,
+					      unsigned command, int column,
+					      int page_addr)
+{
+	struct nand_chip *nand_chip = (struct nand_chip *)mtd->priv;
+	struct bcm47xxnflash *b47n = (struct bcm47xxnflash *)nand_chip->priv;
+	struct bcma_drv_cc *cc = b47n->cc;
+	u32 ctlcode;
+	int i;
+
+	if (column != -1)
+		b47n->curr_column = column;
+	if (page_addr != -1)
+		b47n->curr_page_addr = page_addr;
+
+	switch (command) {
+	case NAND_CMD_RESET:
+		pr_warn("Chip reset not implemented yet\n");
+		break;
+	case NAND_CMD_READID:
+		ctlcode = NCTL_CSA | 0x01000000 | NCTL_CMD1W | NCTL_CMD0;
+		ctlcode |= NAND_CMD_READID;
+		if (bcm47xxnflash_ops_bcm4706_ctl_cmd(b47n->cc, ctlcode)) {
+			pr_err("READID error\n");
+			break;
+		}
+
+		/*
+		 * Reading is specific, last one has to go without NCTL_CSA
+		 * bit. We don't know how many reads NAND subsystem is going
+		 * to perform, so cache everything.
+		 */
+		for (i = 0; i < ARRAY_SIZE(b47n->id_data); i++) {
+			ctlcode = NCTL_CSA | NCTL_READ;
+			if (i == ARRAY_SIZE(b47n->id_data) - 1)
+				ctlcode &= ~NCTL_CSA;
+			if (bcm47xxnflash_ops_bcm4706_ctl_cmd(b47n->cc,
+							      ctlcode)) {
+				pr_err("READID error\n");
+				break;
+			}
+			b47n->id_data[i] =
+				bcma_cc_read32(b47n->cc, BCMA_CC_NFLASH_DATA)
+				& 0xFF;
+		}
+
+		break;
+	case NAND_CMD_STATUS:
+		ctlcode = NCTL_CSA | NCTL_CMD0 | NAND_CMD_STATUS;
+		if (bcm47xxnflash_ops_bcm4706_ctl_cmd(cc, ctlcode))
+			pr_err("STATUS command error\n");
+		break;
+	case NAND_CMD_READ0:
+		break;
+	case NAND_CMD_READOOB:
+		if (page_addr != -1)
+			b47n->curr_column += mtd->writesize;
+		break;
+	case NAND_CMD_ERASE1:
+		bcma_cc_write32(cc, BCMA_CC_NFLASH_ROW_ADDR,
+				b47n->curr_page_addr);
+		ctlcode = 0x00040000 | NCTL_CMD1W | NCTL_CMD0 |
+			  NAND_CMD_ERASE1 | (NAND_CMD_ERASE2 << 8);
+		if (bcm47xxnflash_ops_bcm4706_ctl_cmd(cc, ctlcode))
+			pr_err("ERASE1 failed\n");
+		break;
+	case NAND_CMD_ERASE2:
+		break;
+	case NAND_CMD_SEQIN:
+		/* Set page and column */
+		bcma_cc_write32(cc, BCMA_CC_NFLASH_COL_ADDR,
+				b47n->curr_column);
+		bcma_cc_write32(cc, BCMA_CC_NFLASH_ROW_ADDR,
+				b47n->curr_page_addr);
+
+		/* Prepare to write */
+		ctlcode = 0x40000000 | 0x00040000 | 0x00020000 | 0x00010000;
+		ctlcode |= NAND_CMD_SEQIN;
+		if (bcm47xxnflash_ops_bcm4706_ctl_cmd(cc, ctlcode))
+			pr_err("SEQIN failed\n");
+		break;
+	case NAND_CMD_PAGEPROG:
+		if (bcm47xxnflash_ops_bcm4706_ctl_cmd(cc, 0x00010000 |
+							  NAND_CMD_PAGEPROG))
+			pr_err("PAGEPROG failed\n");
+		if (bcm47xxnflash_ops_bcm4706_poll(cc))
+			pr_err("PAGEPROG not ready\n");
+		break;
+	default:
+		pr_err("Command 0x%X unsupported\n", command);
+		break;
+	}
+	b47n->curr_command = command;
+}
+
+static u8 bcm47xxnflash_ops_bcm4706_read_byte(struct mtd_info *mtd)
+{
+	struct nand_chip *nand_chip = (struct nand_chip *)mtd->priv;
+	struct bcm47xxnflash *b47n = (struct bcm47xxnflash *)nand_chip->priv;
+	struct bcma_drv_cc *cc = b47n->cc;
+	u32 tmp = 0;
+
+	switch (b47n->curr_command) {
+	case NAND_CMD_READID:
+		if (b47n->curr_column >= ARRAY_SIZE(b47n->id_data)) {
+			pr_err("Requested invalid id_data: %d\n",
+			       b47n->curr_column);
+			return 0;
+		}
+		return b47n->id_data[b47n->curr_column++];
+	case NAND_CMD_STATUS:
+		if (bcm47xxnflash_ops_bcm4706_ctl_cmd(cc, NCTL_READ))
+			return 0;
+		return bcma_cc_read32(cc, BCMA_CC_NFLASH_DATA) & 0xff;
+	case NAND_CMD_READOOB:
+		bcm47xxnflash_ops_bcm4706_read(mtd, (u8 *)&tmp, 4);
+		return tmp & 0xFF;
+	}
+
+	pr_err("Invalid command for byte read: 0x%X\n", b47n->curr_command);
+	return 0;
+}
+
+static void bcm47xxnflash_ops_bcm4706_read_buf(struct mtd_info *mtd,
+					       uint8_t *buf, int len)
+{
+	struct nand_chip *nand_chip = (struct nand_chip *)mtd->priv;
+	struct bcm47xxnflash *b47n = (struct bcm47xxnflash *)nand_chip->priv;
+
+	switch (b47n->curr_command) {
+	case NAND_CMD_READ0:
+	case NAND_CMD_READOOB:
+		bcm47xxnflash_ops_bcm4706_read(mtd, buf, len);
+		return;
+	}
+
+	pr_err("Invalid command for buf read: 0x%X\n", b47n->curr_command);
+}
+
+static void bcm47xxnflash_ops_bcm4706_write_buf(struct mtd_info *mtd,
+						const uint8_t *buf, int len)
+{
+	struct nand_chip *nand_chip = (struct nand_chip *)mtd->priv;
+	struct bcm47xxnflash *b47n = (struct bcm47xxnflash *)nand_chip->priv;
+
+	switch (b47n->curr_command) {
+	case NAND_CMD_SEQIN:
+		bcm47xxnflash_ops_bcm4706_write(mtd, buf, len);
+		return;
+	}
+
+	pr_err("Invalid command for buf write: 0x%X\n", b47n->curr_command);
+}
+
+/**************************************************
+ * Init
+ **************************************************/
+
+int bcm47xxnflash_ops_bcm4706_init(struct bcm47xxnflash *b47n)
+{
+	int err;
+	u32 freq;
+	u16 clock;
+	u8 w0, w1, w2, w3, w4;
+
+	unsigned long chipsize; /* MiB */
+	u8 tbits, col_bits, col_size, row_bits, row_bsize;
+	u32 val;
+
+	b47n->nand_chip.select_chip = bcm47xxnflash_ops_bcm4706_select_chip;
+	b47n->nand_chip.cmdfunc = bcm47xxnflash_ops_bcm4706_cmdfunc;
+	b47n->nand_chip.read_byte = bcm47xxnflash_ops_bcm4706_read_byte;
+	b47n->nand_chip.read_buf = bcm47xxnflash_ops_bcm4706_read_buf;
+	b47n->nand_chip.write_buf = bcm47xxnflash_ops_bcm4706_write_buf;
+	b47n->nand_chip.bbt_options = NAND_BBT_USE_FLASH;
+	b47n->nand_chip.ecc.mode = NAND_ECC_NONE; /* TODO: implement ECC */
+
+	/* Enable NAND flash access */
+	bcma_cc_set32(b47n->cc, BCMA_CC_4706_FLASHSCFG,
+		      BCMA_CC_4706_FLASHSCFG_NF1);
+
+	/* Configure wait counters */
+	if (b47n->cc->status & BCMA_CC_CHIPST_4706_PKG_OPTION) {
+		freq = 100000000;
+	} else {
+		freq = bcma_chipco_pll_read(b47n->cc, 4);
+		freq = (freq * 0xFFF) >> 3;
+		freq = (freq * 25000000) >> 3;
+	}
+	clock = freq / 1000000;
+	w0 = bcm47xxnflash_ops_bcm4706_ns_to_cycle(15, clock);
+	w1 = bcm47xxnflash_ops_bcm4706_ns_to_cycle(20, clock);
+	w2 = bcm47xxnflash_ops_bcm4706_ns_to_cycle(10, clock);
+	w3 = bcm47xxnflash_ops_bcm4706_ns_to_cycle(10, clock);
+	w4 = bcm47xxnflash_ops_bcm4706_ns_to_cycle(100, clock);
+	bcma_cc_write32(b47n->cc, BCMA_CC_NFLASH_WAITCNT0,
+			(w4 << 24 | w3 << 18 | w2 << 12 | w1 << 6 | w0));
+
+	/* Scan NAND */
+	err = nand_scan(&b47n->mtd, 1);
+	if (err) {
+		pr_err("Could not scan NAND flash: %d\n", err);
+		goto exit;
+	}
+
+	/* Configure FLASH */
+	chipsize = b47n->nand_chip.chipsize >> 20;
+	tbits = ffs(chipsize); /* find first bit set */
+	if (!tbits || tbits != fls(chipsize)) {
+		pr_err("Invalid flash size: 0x%lX\n", chipsize);
+		err = -ENOTSUPP;
+		goto exit;
+	}
+	tbits += 19; /* Broadcom increases *index* by 20, we increase *pos* */
+
+	col_bits = b47n->nand_chip.page_shift + 1;
+	col_size = (col_bits + 7) / 8;
+
+	row_bits = tbits - col_bits + 1;
+	row_bsize = (row_bits + 7) / 8;
+
+	val = ((row_bsize - 1) << 6) | ((col_size - 1) << 4) | 2;
+	bcma_cc_write32(b47n->cc, BCMA_CC_NFLASH_CONF, val);
+
+exit:
+	if (err)
+		bcma_cc_mask32(b47n->cc, BCMA_CC_4706_FLASHSCFG,
+			       ~BCMA_CC_4706_FLASHSCFG_NF1);
+	return err;
+}
diff --git a/drivers/mtd/nand/bcm_umi_bch.c b/drivers/mtd/nand/bcm_umi_bch.c
deleted file mode 100644
index a930666d068..00000000000
--- a/drivers/mtd/nand/bcm_umi_bch.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2009 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/* ---- Include Files ---------------------------------------------------- */
-#include "nand_bcm_umi.h"
-
-/* ---- External Variable Declarations ----------------------------------- */
-/* ---- External Function Prototypes ------------------------------------- */
-/* ---- Public Variables ------------------------------------------------- */
-/* ---- Private Constants and Types -------------------------------------- */
-
-/* ---- Private Function Prototypes -------------------------------------- */
-static int bcm_umi_bch_read_page_hwecc(struct mtd_info *mtd,
-	struct nand_chip *chip, uint8_t *buf, int page);
-static void bcm_umi_bch_write_page_hwecc(struct mtd_info *mtd,
-	struct nand_chip *chip, const uint8_t *buf);
-
-/* ---- Private Variables ------------------------------------------------ */
-
-/*
-** nand_hw_eccoob
-** New oob placement block for use with hardware ecc generation.
-*/
-static struct nand_ecclayout nand_hw_eccoob_512 = {
-	/* Reserve 5 for BI indicator */
-	.oobfree = {
-#if (NAND_ECC_NUM_BYTES > 3)
-		    {.offset = 0, .length = 2}
-#else
-		    {.offset = 0, .length = 5},
-		    {.offset = 6, .length = 7}
-#endif
-		    }
-};
-
-/*
-** We treat the OOB for a 2K page as if it were 4 512 byte oobs,
-** except the BI is at byte 0.
-*/
-static struct nand_ecclayout nand_hw_eccoob_2048 = {
-	/* Reserve 0 as BI indicator */
-	.oobfree = {
-#if (NAND_ECC_NUM_BYTES > 10)
-		    {.offset = 1, .length = 2},
-#elif (NAND_ECC_NUM_BYTES > 7)
-		    {.offset = 1, .length = 5},
-		    {.offset = 16, .length = 6},
-		    {.offset = 32, .length = 6},
-		    {.offset = 48, .length = 6}
-#else
-		    {.offset = 1, .length = 8},
-		    {.offset = 16, .length = 9},
-		    {.offset = 32, .length = 9},
-		    {.offset = 48, .length = 9}
-#endif
-		    }
-};
-
-/* We treat the OOB for a 4K page as if it were 8 512 byte oobs,
- * except the BI is at byte 0. */
-static struct nand_ecclayout nand_hw_eccoob_4096 = {
-	/* Reserve 0 as BI indicator */
-	.oobfree = {
-#if (NAND_ECC_NUM_BYTES > 10)
-		    {.offset = 1, .length = 2},
-		    {.offset = 16, .length = 3},
-		    {.offset = 32, .length = 3},
-		    {.offset = 48, .length = 3},
-		    {.offset = 64, .length = 3},
-		    {.offset = 80, .length = 3},
-		    {.offset = 96, .length = 3},
-		    {.offset = 112, .length = 3}
-#else
-		    {.offset = 1, .length = 5},
-		    {.offset = 16, .length = 6},
-		    {.offset = 32, .length = 6},
-		    {.offset = 48, .length = 6},
-		    {.offset = 64, .length = 6},
-		    {.offset = 80, .length = 6},
-		    {.offset = 96, .length = 6},
-		    {.offset = 112, .length = 6}
-#endif
-		    }
-};
-
-/* ---- Private Functions ------------------------------------------------ */
-/* ==== Public Functions ================================================= */
-
-/****************************************************************************
-*
-*  bcm_umi_bch_read_page_hwecc - hardware ecc based page read function
-*  @mtd:	mtd info structure
-*  @chip:	nand chip info structure
-*  @buf:	buffer to store read data
-*
-***************************************************************************/
-static int bcm_umi_bch_read_page_hwecc(struct mtd_info *mtd,
-				       struct nand_chip *chip, uint8_t * buf,
-						 int page)
-{
-	int sectorIdx = 0;
-	int eccsize = chip->ecc.size;
-	int eccsteps = chip->ecc.steps;
-	uint8_t *datap = buf;
-	uint8_t eccCalc[NAND_ECC_NUM_BYTES];
-	int sectorOobSize = mtd->oobsize / eccsteps;
-	int stat;
-
-	for (sectorIdx = 0; sectorIdx < eccsteps;
-			sectorIdx++, datap += eccsize) {
-		if (sectorIdx > 0) {
-			/* Seek to page location within sector */
-			chip->cmdfunc(mtd, NAND_CMD_RNDOUT, sectorIdx * eccsize,
-				      -1);
-		}
-
-		/* Enable hardware ECC before reading the buf */
-		nand_bcm_umi_bch_enable_read_hwecc();
-
-		/* Read in data */
-		bcm_umi_nand_read_buf(mtd, datap, eccsize);
-
-		/* Pause hardware ECC after reading the buf */
-		nand_bcm_umi_bch_pause_read_ecc_calc();
-
-		/* Read the OOB ECC */
-		chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
-			      mtd->writesize + sectorIdx * sectorOobSize, -1);
-		nand_bcm_umi_bch_read_oobEcc(mtd->writesize, eccCalc,
-					     NAND_ECC_NUM_BYTES,
-					     chip->oob_poi +
-					     sectorIdx * sectorOobSize);
-
-		/* Correct any ECC detected errors */
-		stat =
-		    nand_bcm_umi_bch_correct_page(datap, eccCalc,
-						  NAND_ECC_NUM_BYTES);
-
-		/* Update Stats */
-		if (stat < 0) {
-#if defined(NAND_BCM_UMI_DEBUG)
-			printk(KERN_WARNING "%s uncorr_err sectorIdx=%d\n",
-			       __func__, sectorIdx);
-			printk(KERN_WARNING
-			       "%s data %02x %02x %02x %02x "
-					 "%02x %02x %02x %02x\n",
-			       __func__, datap[0], datap[1], datap[2], datap[3],
-			       datap[4], datap[5], datap[6], datap[7]);
-			printk(KERN_WARNING
-			       "%s ecc  %02x %02x %02x %02x "
-					 "%02x %02x %02x %02x %02x %02x "
-					 "%02x %02x %02x\n",
-			       __func__, eccCalc[0], eccCalc[1], eccCalc[2],
-			       eccCalc[3], eccCalc[4], eccCalc[5], eccCalc[6],
-			       eccCalc[7], eccCalc[8], eccCalc[9], eccCalc[10],
-			       eccCalc[11], eccCalc[12]);
-			BUG();
-#endif
-			mtd->ecc_stats.failed++;
-		} else {
-#if defined(NAND_BCM_UMI_DEBUG)
-			if (stat > 0) {
-				printk(KERN_INFO
-				       "%s %d correctable_errors detected\n",
-				       __func__, stat);
-			}
-#endif
-			mtd->ecc_stats.corrected += stat;
-		}
-	}
-	return 0;
-}
-
-/****************************************************************************
-*
-*  bcm_umi_bch_write_page_hwecc - hardware ecc based page write function
-*  @mtd:	mtd info structure
-*  @chip:	nand chip info structure
-*  @buf:	data buffer
-*
-***************************************************************************/
-static void bcm_umi_bch_write_page_hwecc(struct mtd_info *mtd,
-	struct nand_chip *chip, const uint8_t *buf)
-{
-	int sectorIdx = 0;
-	int eccsize = chip->ecc.size;
-	int eccsteps = chip->ecc.steps;
-	const uint8_t *datap = buf;
-	uint8_t *oobp = chip->oob_poi;
-	int sectorOobSize = mtd->oobsize / eccsteps;
-
-	for (sectorIdx = 0; sectorIdx < eccsteps;
-	     sectorIdx++, datap += eccsize, oobp += sectorOobSize) {
-		/* Enable hardware ECC before writing the buf */
-		nand_bcm_umi_bch_enable_write_hwecc();
-		bcm_umi_nand_write_buf(mtd, datap, eccsize);
-		nand_bcm_umi_bch_write_oobEcc(mtd->writesize, oobp,
-					      NAND_ECC_NUM_BYTES);
-	}
-
-	bcm_umi_nand_write_buf(mtd, chip->oob_poi, mtd->oobsize);
-}
diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c
deleted file mode 100644
index dfe262c726f..00000000000
--- a/drivers/mtd/nand/bcm_umi_nand.c
+++ /dev/null
@@ -1,581 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2009 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/* ---- Include Files ---------------------------------------------------- */
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-types.h>
-#include <asm/system.h>
-
-#include <mach/reg_nand.h>
-#include <mach/reg_umi.h>
-
-#include "nand_bcm_umi.h"
-
-#include <mach/memory_settings.h>
-
-#define USE_DMA 1
-#include <mach/dma.h>
-#include <linux/dma-mapping.h>
-#include <linux/completion.h>
-
-/* ---- External Variable Declarations ----------------------------------- */
-/* ---- External Function Prototypes ------------------------------------- */
-/* ---- Public Variables ------------------------------------------------- */
-/* ---- Private Constants and Types -------------------------------------- */
-static const __devinitconst char gBanner[] = KERN_INFO \
-	"BCM UMI MTD NAND Driver: 1.00\n";
-
-#ifdef CONFIG_MTD_PARTITIONS
-const char *part_probes[] = { "cmdlinepart", NULL };
-#endif
-
-#if NAND_ECC_BCH
-static uint8_t scan_ff_pattern[] = { 0xff };
-
-static struct nand_bbt_descr largepage_bbt = {
-	.options = 0,
-	.offs = 0,
-	.len = 1,
-	.pattern = scan_ff_pattern
-};
-#endif
-
-/*
-** Preallocate a buffer to avoid having to do this every dma operation.
-** This is the size of the preallocated coherent DMA buffer.
-*/
-#if USE_DMA
-#define DMA_MIN_BUFLEN	512
-#define DMA_MAX_BUFLEN	PAGE_SIZE
-#define USE_DIRECT_IO(len)	(((len) < DMA_MIN_BUFLEN) || \
-	((len) > DMA_MAX_BUFLEN))
-
-/*
- * The current NAND data space goes from 0x80001900 to 0x80001FFF,
- * which is only 0x700 = 1792 bytes long. This is too small for 2K, 4K page
- * size NAND flash. Need to break the DMA down to multiple 1Ks.
- *
- * Need to make sure REG_NAND_DATA_PADDR + DMA_MAX_LEN < 0x80002000
- */
-#define DMA_MAX_LEN             1024
-
-#else /* !USE_DMA */
-#define DMA_MIN_BUFLEN          0
-#define DMA_MAX_BUFLEN          0
-#define USE_DIRECT_IO(len)      1
-#endif
-/* ---- Private Function Prototypes -------------------------------------- */
-static void bcm_umi_nand_read_buf(struct mtd_info *mtd, u_char * buf, int len);
-static void bcm_umi_nand_write_buf(struct mtd_info *mtd, const u_char * buf,
-				   int len);
-
-/* ---- Private Variables ------------------------------------------------ */
-static struct mtd_info *board_mtd;
-static void __iomem *bcm_umi_io_base;
-static void *virtPtr;
-static dma_addr_t physPtr;
-static struct completion nand_comp;
-
-/* ---- Private Functions ------------------------------------------------ */
-#if NAND_ECC_BCH
-#include "bcm_umi_bch.c"
-#else
-#include "bcm_umi_hamming.c"
-#endif
-
-#if USE_DMA
-
-/* Handler called when the DMA finishes. */
-static void nand_dma_handler(DMA_Device_t dev, int reason, void *userData)
-{
-	complete(&nand_comp);
-}
-
-static int nand_dma_init(void)
-{
-	int rc;
-
-	rc = dma_set_device_handler(DMA_DEVICE_NAND_MEM_TO_MEM,
-		nand_dma_handler, NULL);
-	if (rc != 0) {
-		printk(KERN_ERR "dma_set_device_handler failed: %d\n", rc);
-		return rc;
-	}
-
-	virtPtr =
-	    dma_alloc_coherent(NULL, DMA_MAX_BUFLEN, &physPtr, GFP_KERNEL);
-	if (virtPtr == NULL) {
-		printk(KERN_ERR "NAND - Failed to allocate memory for DMA buffer\n");
-		return -ENOMEM;
-	}
-
-	return 0;
-}
-
-static void nand_dma_term(void)
-{
-	if (virtPtr != NULL)
-		dma_free_coherent(NULL, DMA_MAX_BUFLEN, virtPtr, physPtr);
-}
-
-static void nand_dma_read(void *buf, int len)
-{
-	int offset = 0;
-	int tmp_len = 0;
-	int len_left = len;
-	DMA_Handle_t hndl;
-
-	if (virtPtr == NULL)
-		panic("nand_dma_read: virtPtr == NULL\n");
-
-	if ((void *)physPtr == NULL)
-		panic("nand_dma_read: physPtr == NULL\n");
-
-	hndl = dma_request_channel(DMA_DEVICE_NAND_MEM_TO_MEM);
-	if (hndl < 0) {
-		printk(KERN_ERR
-		       "nand_dma_read: unable to allocate dma channel: %d\n",
-		       (int)hndl);
-		panic("\n");
-	}
-
-	while (len_left > 0) {
-		if (len_left > DMA_MAX_LEN) {
-			tmp_len = DMA_MAX_LEN;
-			len_left -= DMA_MAX_LEN;
-		} else {
-			tmp_len = len_left;
-			len_left = 0;
-		}
-
-		init_completion(&nand_comp);
-		dma_transfer_mem_to_mem(hndl, REG_NAND_DATA_PADDR,
-					physPtr + offset, tmp_len);
-		wait_for_completion(&nand_comp);
-
-		offset += tmp_len;
-	}
-
-	dma_free_channel(hndl);
-
-	if (buf != NULL)
-		memcpy(buf, virtPtr, len);
-}
-
-static void nand_dma_write(const void *buf, int len)
-{
-	int offset = 0;
-	int tmp_len = 0;
-	int len_left = len;
-	DMA_Handle_t hndl;
-
-	if (buf == NULL)
-		panic("nand_dma_write: buf == NULL\n");
-
-	if (virtPtr == NULL)
-		panic("nand_dma_write: virtPtr == NULL\n");
-
-	if ((void *)physPtr == NULL)
-		panic("nand_dma_write: physPtr == NULL\n");
-
-	memcpy(virtPtr, buf, len);
-
-
-	hndl = dma_request_channel(DMA_DEVICE_NAND_MEM_TO_MEM);
-	if (hndl < 0) {
-		printk(KERN_ERR
-		       "nand_dma_write: unable to allocate dma channel: %d\n",
-		       (int)hndl);
-		panic("\n");
-	}
-
-	while (len_left > 0) {
-		if (len_left > DMA_MAX_LEN) {
-			tmp_len = DMA_MAX_LEN;
-			len_left -= DMA_MAX_LEN;
-		} else {
-			tmp_len = len_left;
-			len_left = 0;
-		}
-
-		init_completion(&nand_comp);
-		dma_transfer_mem_to_mem(hndl, physPtr + offset,
-					REG_NAND_DATA_PADDR, tmp_len);
-		wait_for_completion(&nand_comp);
-
-		offset += tmp_len;
-	}
-
-	dma_free_channel(hndl);
-}
-
-#endif
-
-static int nand_dev_ready(struct mtd_info *mtd)
-{
-	return nand_bcm_umi_dev_ready();
-}
-
-/****************************************************************************
-*
-*  bcm_umi_nand_inithw
-*
-*   This routine does the necessary hardware (board-specific)
-*   initializations.  This includes setting up the timings, etc.
-*
-***************************************************************************/
-int bcm_umi_nand_inithw(void)
-{
-	/* Configure nand timing parameters */
-	REG_UMI_NAND_TCR &= ~0x7ffff;
-	REG_UMI_NAND_TCR |= HW_CFG_NAND_TCR;
-
-#if !defined(CONFIG_MTD_NAND_BCM_UMI_HWCS)
-	/* enable software control of CS */
-	REG_UMI_NAND_TCR |= REG_UMI_NAND_TCR_CS_SWCTRL;
-#endif
-
-	/* keep NAND chip select asserted */
-	REG_UMI_NAND_RCSR |= REG_UMI_NAND_RCSR_CS_ASSERTED;
-
-	REG_UMI_NAND_TCR &= ~REG_UMI_NAND_TCR_WORD16;
-	/* enable writes to flash */
-	REG_UMI_MMD_ICR |= REG_UMI_MMD_ICR_FLASH_WP;
-
-	writel(NAND_CMD_RESET, bcm_umi_io_base + REG_NAND_CMD_OFFSET);
-	nand_bcm_umi_wait_till_ready();
-
-#if NAND_ECC_BCH
-	nand_bcm_umi_bch_config_ecc(NAND_ECC_NUM_BYTES);
-#endif
-
-	return 0;
-}
-
-/* Used to turn latch the proper register for access. */
-static void bcm_umi_nand_hwcontrol(struct mtd_info *mtd, int cmd,
-				   unsigned int ctrl)
-{
-	/* send command to hardware */
-	struct nand_chip *chip = mtd->priv;
-	if (ctrl & NAND_CTRL_CHANGE) {
-		if (ctrl & NAND_CLE) {
-			chip->IO_ADDR_W = bcm_umi_io_base + REG_NAND_CMD_OFFSET;
-			goto CMD;
-		}
-		if (ctrl & NAND_ALE) {
-			chip->IO_ADDR_W =
-			    bcm_umi_io_base + REG_NAND_ADDR_OFFSET;
-			goto CMD;
-		}
-		chip->IO_ADDR_W = bcm_umi_io_base + REG_NAND_DATA8_OFFSET;
-	}
-
-CMD:
-	/* Send command to chip directly */
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, chip->IO_ADDR_W);
-}
-
-static void bcm_umi_nand_write_buf(struct mtd_info *mtd, const u_char * buf,
-				   int len)
-{
-	if (USE_DIRECT_IO(len)) {
-		/* Do it the old way if the buffer is small or too large.
-		 * Probably quicker than starting and checking dma. */
-		int i;
-		struct nand_chip *this = mtd->priv;
-
-		for (i = 0; i < len; i++)
-			writeb(buf[i], this->IO_ADDR_W);
-	}
-#if USE_DMA
-	else
-		nand_dma_write(buf, len);
-#endif
-}
-
-static void bcm_umi_nand_read_buf(struct mtd_info *mtd, u_char * buf, int len)
-{
-	if (USE_DIRECT_IO(len)) {
-		int i;
-		struct nand_chip *this = mtd->priv;
-
-		for (i = 0; i < len; i++)
-			buf[i] = readb(this->IO_ADDR_R);
-	}
-#if USE_DMA
-	else
-		nand_dma_read(buf, len);
-#endif
-}
-
-static uint8_t readbackbuf[NAND_MAX_PAGESIZE];
-static int bcm_umi_nand_verify_buf(struct mtd_info *mtd, const u_char * buf,
-				   int len)
-{
-	/*
-	 * Try to readback page with ECC correction. This is necessary
-	 * for MLC parts which may have permanently stuck bits.
-	 */
-	struct nand_chip *chip = mtd->priv;
-	int ret = chip->ecc.read_page(mtd, chip, readbackbuf, 0);
-	if (ret < 0)
-		return -EFAULT;
-	else {
-		if (memcmp(readbackbuf, buf, len) == 0)
-			return 0;
-
-		return -EFAULT;
-	}
-	return 0;
-}
-
-static int __devinit bcm_umi_nand_probe(struct platform_device *pdev)
-{
-	struct nand_chip *this;
-	struct resource *r;
-	int err = 0;
-
-	printk(gBanner);
-
-	/* Allocate memory for MTD device structure and private data */
-	board_mtd =
-	    kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip),
-		    GFP_KERNEL);
-	if (!board_mtd) {
-		printk(KERN_WARNING
-		       "Unable to allocate NAND MTD device structure.\n");
-		return -ENOMEM;
-	}
-
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
-	if (!r)
-		return -ENXIO;
-
-	/* map physical address */
-	bcm_umi_io_base = ioremap(r->start, r->end - r->start + 1);
-
-	if (!bcm_umi_io_base) {
-		printk(KERN_ERR "ioremap to access BCM UMI NAND chip failed\n");
-		kfree(board_mtd);
-		return -EIO;
-	}
-
-	/* Get pointer to private data */
-	this = (struct nand_chip *)(&board_mtd[1]);
-
-	/* Initialize structures */
-	memset((char *)board_mtd, 0, sizeof(struct mtd_info));
-	memset((char *)this, 0, sizeof(struct nand_chip));
-
-	/* Link the private data with the MTD structure */
-	board_mtd->priv = this;
-
-	/* Initialize the NAND hardware.  */
-	if (bcm_umi_nand_inithw() < 0) {
-		printk(KERN_ERR "BCM UMI NAND chip could not be initialized\n");
-		iounmap(bcm_umi_io_base);
-		kfree(board_mtd);
-		return -EIO;
-	}
-
-	/* Set address of NAND IO lines */
-	this->IO_ADDR_W = bcm_umi_io_base + REG_NAND_DATA8_OFFSET;
-	this->IO_ADDR_R = bcm_umi_io_base + REG_NAND_DATA8_OFFSET;
-
-	/* Set command delay time, see datasheet for correct value */
-	this->chip_delay = 0;
-	/* Assign the device ready function, if available */
-	this->dev_ready = nand_dev_ready;
-	this->options = 0;
-
-	this->write_buf = bcm_umi_nand_write_buf;
-	this->read_buf = bcm_umi_nand_read_buf;
-	this->verify_buf = bcm_umi_nand_verify_buf;
-
-	this->cmd_ctrl = bcm_umi_nand_hwcontrol;
-	this->ecc.mode = NAND_ECC_HW;
-	this->ecc.size = 512;
-	this->ecc.bytes = NAND_ECC_NUM_BYTES;
-#if NAND_ECC_BCH
-	this->ecc.read_page = bcm_umi_bch_read_page_hwecc;
-	this->ecc.write_page = bcm_umi_bch_write_page_hwecc;
-#else
-	this->ecc.correct = nand_correct_data512;
-	this->ecc.calculate = bcm_umi_hamming_get_hw_ecc;
-	this->ecc.hwctl = bcm_umi_hamming_enable_hwecc;
-#endif
-
-#if USE_DMA
-	err = nand_dma_init();
-	if (err != 0)
-		return err;
-#endif
-
-	/* Figure out the size of the device that we have.
-	 * We need to do this to figure out which ECC
-	 * layout we'll be using.
-	 */
-
-	err = nand_scan_ident(board_mtd, 1, NULL);
-	if (err) {
-		printk(KERN_ERR "nand_scan failed: %d\n", err);
-		iounmap(bcm_umi_io_base);
-		kfree(board_mtd);
-		return err;
-	}
-
-	/* Now that we know the nand size, we can setup the ECC layout */
-
-	switch (board_mtd->writesize) {	/* writesize is the pagesize */
-	case 4096:
-		this->ecc.layout = &nand_hw_eccoob_4096;
-		break;
-	case 2048:
-		this->ecc.layout = &nand_hw_eccoob_2048;
-		break;
-	case 512:
-		this->ecc.layout = &nand_hw_eccoob_512;
-		break;
-	default:
-		{
-			printk(KERN_ERR "NAND - Unrecognized pagesize: %d\n",
-					 board_mtd->writesize);
-			return -EINVAL;
-		}
-	}
-
-#if NAND_ECC_BCH
-	if (board_mtd->writesize > 512) {
-		if (this->options & NAND_USE_FLASH_BBT)
-			largepage_bbt.options = NAND_BBT_SCAN2NDPAGE;
-		this->badblock_pattern = &largepage_bbt;
-	}
-#endif
-
-	/* Now finish off the scan, now that ecc.layout has been initialized. */
-
-	err = nand_scan_tail(board_mtd);
-	if (err) {
-		printk(KERN_ERR "nand_scan failed: %d\n", err);
-		iounmap(bcm_umi_io_base);
-		kfree(board_mtd);
-		return err;
-	}
-
-	/* Register the partitions */
-	{
-		int nr_partitions;
-		struct mtd_partition *partition_info;
-
-		board_mtd->name = "bcm_umi-nand";
-		nr_partitions =
-		    parse_mtd_partitions(board_mtd, part_probes,
-					 &partition_info, 0);
-
-		if (nr_partitions <= 0) {
-			printk(KERN_ERR "BCM UMI NAND: Too few partitions - %d\n",
-			       nr_partitions);
-			iounmap(bcm_umi_io_base);
-			kfree(board_mtd);
-			return -EIO;
-		}
-		add_mtd_partitions(board_mtd, partition_info, nr_partitions);
-	}
-
-	/* Return happy */
-	return 0;
-}
-
-static int bcm_umi_nand_remove(struct platform_device *pdev)
-{
-#if USE_DMA
-	nand_dma_term();
-#endif
-
-	/* Release resources, unregister device */
-	nand_release(board_mtd);
-
-	/* unmap physical address */
-	iounmap(bcm_umi_io_base);
-
-	/* Free the MTD device structure */
-	kfree(board_mtd);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int bcm_umi_nand_suspend(struct platform_device *pdev,
-				pm_message_t state)
-{
-	printk(KERN_ERR "MTD NAND suspend is being called\n");
-	return 0;
-}
-
-static int bcm_umi_nand_resume(struct platform_device *pdev)
-{
-	printk(KERN_ERR "MTD NAND resume is being called\n");
-	return 0;
-}
-#else
-#define bcm_umi_nand_suspend   NULL
-#define bcm_umi_nand_resume    NULL
-#endif
-
-static struct platform_driver nand_driver = {
-	.driver = {
-		   .name = "bcm-nand",
-		   .owner = THIS_MODULE,
-		   },
-	.probe = bcm_umi_nand_probe,
-	.remove = bcm_umi_nand_remove,
-	.suspend = bcm_umi_nand_suspend,
-	.resume = bcm_umi_nand_resume,
-};
-
-static int __init nand_init(void)
-{
-	return platform_driver_register(&nand_driver);
-}
-
-static void __exit nand_exit(void)
-{
-	platform_driver_unregister(&nand_driver);
-}
-
-module_init(nand_init);
-module_exit(nand_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Broadcom");
-MODULE_DESCRIPTION("BCM UMI MTD NAND driver");
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index 2974995e194..722898aea7a 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -20,9 +20,6 @@
  *		- DMA supported in ECC_HW
  *		- YAFFS tested as rootfs in both ECC_HW and ECC_SW
  *
- * TODO:
- * 	Enable JFFS2 over NAND as rootfs
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -40,7 +37,6 @@
 
 #include <linux/module.h>
 #include <linux/types.h>
-#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/ioport.h>
@@ -113,15 +109,6 @@ static const unsigned short bfin_nfc_pin_req[] =
 	 0};
 
 #ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
-static uint8_t bbt_pattern[] = { 0xff };
-
-static struct nand_bbt_descr bootrom_bbt = {
-	.options = 0,
-	.offs = 63,
-	.len = 1,
-	.pattern = bbt_pattern,
-};
-
 static struct nand_ecclayout bootrom_ecclayout = {
 	.eccbytes = 24,
 	.eccpos = {
@@ -183,7 +170,7 @@ static struct bf5xx_nand_info *to_nand_info(struct platform_device *pdev)
 
 static struct bf5xx_nand_platform *to_nand_plat(struct platform_device *pdev)
 {
-	return pdev->dev.platform_data;
+	return dev_get_platdata(&pdev->dev);
 }
 
 /*
@@ -206,7 +193,7 @@ static void bf5xx_nand_hwcontrol(struct mtd_info *mtd, int cmd,
 
 	if (ctrl & NAND_CLE)
 		bfin_write_NFC_CMD(cmd);
-	else
+	else if (ctrl & NAND_ALE)
 		bfin_write_NFC_ADDR(cmd);
 	SSYNC();
 }
@@ -218,9 +205,9 @@ static void bf5xx_nand_hwcontrol(struct mtd_info *mtd, int cmd,
  */
 static int bf5xx_nand_devready(struct mtd_info *mtd)
 {
-	unsigned short val = bfin_read_NFC_IRQSTAT();
+	unsigned short val = bfin_read_NFC_STAT();
 
-	if ((val & NBUSYIRQ) == NBUSYIRQ)
+	if ((val & NBUSY) == NBUSY)
 		return 1;
 	else
 		return 0;
@@ -317,18 +304,16 @@ static int bf5xx_nand_correct_data_256(struct mtd_info *mtd, u_char *dat,
 static int bf5xx_nand_correct_data(struct mtd_info *mtd, u_char *dat,
 					u_char *read_ecc, u_char *calc_ecc)
 {
-	struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
-	struct bf5xx_nand_platform *plat = info->platform;
-	unsigned short page_size = (plat->page_size ? 512 : 256);
+	struct nand_chip *chip = mtd->priv;
 	int ret;
 
 	ret = bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc);
 
-	/* If page size is 512, correct second 256 bytes */
-	if (page_size == 512) {
+	/* If ecc size is 512, correct second 256 bytes */
+	if (chip->ecc.size == 512) {
 		dat += 256;
-		read_ecc += 8;
-		calc_ecc += 8;
+		read_ecc += 3;
+		calc_ecc += 3;
 		ret |= bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc);
 	}
 
@@ -344,13 +329,12 @@ static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd,
 		const u_char *dat, u_char *ecc_code)
 {
 	struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
-	struct bf5xx_nand_platform *plat = info->platform;
-	u16 page_size = (plat->page_size ? 512 : 256);
+	struct nand_chip *chip = mtd->priv;
 	u16 ecc0, ecc1;
 	u32 code[2];
 	u8 *p;
 
-	/* first 4 bytes ECC code for 256 page size */
+	/* first 3 bytes ECC code for 256 page size */
 	ecc0 = bfin_read_NFC_ECC0();
 	ecc1 = bfin_read_NFC_ECC1();
 
@@ -358,12 +342,11 @@ static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd,
 
 	dev_dbg(info->device, "returning ecc 0x%08x\n", code[0]);
 
-	/* first 3 bytes in ecc_code for 256 page size */
 	p = (u8 *) code;
 	memcpy(ecc_code, p, 3);
 
-	/* second 4 bytes ECC code for 512 page size */
-	if (page_size == 512) {
+	/* second 3 bytes ECC code for 512 ecc size */
+	if (chip->ecc.size == 512) {
 		ecc0 = bfin_read_NFC_ECC2();
 		ecc1 = bfin_read_NFC_ECC3();
 		code[1] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11);
@@ -483,8 +466,7 @@ static void bf5xx_nand_dma_rw(struct mtd_info *mtd,
 				uint8_t *buf, int is_read)
 {
 	struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
-	struct bf5xx_nand_platform *plat = info->platform;
-	unsigned short page_size = (plat->page_size ? 512 : 256);
+	struct nand_chip *chip = mtd->priv;
 	unsigned short val;
 
 	dev_dbg(info->device, " mtd->%p, buf->%p, is_read %d\n",
@@ -498,10 +480,10 @@ static void bf5xx_nand_dma_rw(struct mtd_info *mtd,
 	 */
 	if (is_read)
 		invalidate_dcache_range((unsigned int)buf,
-				(unsigned int)(buf + page_size));
+				(unsigned int)(buf + chip->ecc.size));
 	else
 		flush_dcache_range((unsigned int)buf,
-				(unsigned int)(buf + page_size));
+				(unsigned int)(buf + chip->ecc.size));
 
 	/*
 	 * This register must be written before each page is
@@ -510,6 +492,8 @@ static void bf5xx_nand_dma_rw(struct mtd_info *mtd,
 	 */
 	bfin_write_NFC_RST(ECC_RST);
 	SSYNC();
+	while (bfin_read_NFC_RST() & ECC_RST)
+		cpu_relax();
 
 	disable_dma(CH_NFC);
 	clear_dma_irqstat(CH_NFC);
@@ -520,13 +504,13 @@ static void bf5xx_nand_dma_rw(struct mtd_info *mtd,
 
 	/* The DMAs have different size on BF52x and BF54x */
 #ifdef CONFIG_BF52x
-	set_dma_x_count(CH_NFC, (page_size >> 1));
+	set_dma_x_count(CH_NFC, (chip->ecc.size >> 1));
 	set_dma_x_modify(CH_NFC, 2);
 	val = DI_EN | WDSIZE_16;
 #endif
 
 #ifdef CONFIG_BF54x
-	set_dma_x_count(CH_NFC, (page_size >> 2));
+	set_dma_x_count(CH_NFC, (chip->ecc.size >> 2));
 	set_dma_x_modify(CH_NFC, 4);
 	val = DI_EN | WDSIZE_32;
 #endif
@@ -548,12 +532,11 @@ static void bf5xx_nand_dma_read_buf(struct mtd_info *mtd,
 					uint8_t *buf, int len)
 {
 	struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
-	struct bf5xx_nand_platform *plat = info->platform;
-	unsigned short page_size = (plat->page_size ? 512 : 256);
+	struct nand_chip *chip = mtd->priv;
 
 	dev_dbg(info->device, "mtd->%p, buf->%p, int %d\n", mtd, buf, len);
 
-	if (len == page_size)
+	if (len == chip->ecc.size)
 		bf5xx_nand_dma_rw(mtd, buf, 1);
 	else
 		bf5xx_nand_read_buf(mtd, buf, len);
@@ -563,17 +546,34 @@ static void bf5xx_nand_dma_write_buf(struct mtd_info *mtd,
 				const uint8_t *buf, int len)
 {
 	struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
-	struct bf5xx_nand_platform *plat = info->platform;
-	unsigned short page_size = (plat->page_size ? 512 : 256);
+	struct nand_chip *chip = mtd->priv;
 
 	dev_dbg(info->device, "mtd->%p, buf->%p, len %d\n", mtd, buf, len);
 
-	if (len == page_size)
+	if (len == chip->ecc.size)
 		bf5xx_nand_dma_rw(mtd, (uint8_t *)buf, 0);
 	else
 		bf5xx_nand_write_buf(mtd, buf, len);
 }
 
+static int bf5xx_nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+		uint8_t *buf, int oob_required, int page)
+{
+	bf5xx_nand_read_buf(mtd, buf, mtd->writesize);
+	bf5xx_nand_read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	return 0;
+}
+
+static int bf5xx_nand_write_page_raw(struct mtd_info *mtd,
+		struct nand_chip *chip,	const uint8_t *buf, int oob_required)
+{
+	bf5xx_nand_write_buf(mtd, buf, mtd->writesize);
+	bf5xx_nand_write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	return 0;
+}
+
 /*
  * System initialization functions
  */
@@ -627,15 +627,14 @@ static int bf5xx_nand_hw_init(struct bf5xx_nand_info *info)
 
 	/* setup NFC_CTL register */
 	dev_info(info->device,
-		"page_size=%d, data_width=%d, wr_dly=%d, rd_dly=%d\n",
-		(plat->page_size ? 512 : 256),
+		"data_width=%d, wr_dly=%d, rd_dly=%d\n",
 		(plat->data_width ? 16 : 8),
 		plat->wr_dly, plat->rd_dly);
 
-	val = (plat->page_size << NFC_PG_SIZE_OFFSET) |
+	val = (1 << NFC_PG_SIZE_OFFSET) |
 		(plat->data_width << NFC_NWIDTH_OFFSET) |
 		(plat->rd_dly << NFC_RDDLY_OFFSET) |
-		(plat->rd_dly << NFC_WRDLY_OFFSET);
+		(plat->wr_dly << NFC_WRDLY_OFFSET);
 	dev_dbg(info->device, "NFC_CTL is 0x%04x\n", val);
 
 	bfin_write_NFC_CTL(val);
@@ -658,46 +657,60 @@ static int bf5xx_nand_hw_init(struct bf5xx_nand_info *info)
 /*
  * Device management interface
  */
-static int __devinit bf5xx_nand_add_partition(struct bf5xx_nand_info *info)
+static int bf5xx_nand_add_partition(struct bf5xx_nand_info *info)
 {
 	struct mtd_info *mtd = &info->mtd;
-
-#ifdef CONFIG_MTD_PARTITIONS
 	struct mtd_partition *parts = info->platform->partitions;
 	int nr = info->platform->nr_partitions;
 
-	return add_mtd_partitions(mtd, parts, nr);
-#else
-	return add_mtd_device(mtd);
-#endif
+	return mtd_device_register(mtd, parts, nr);
 }
 
-static int __devexit bf5xx_nand_remove(struct platform_device *pdev)
+static int bf5xx_nand_remove(struct platform_device *pdev)
 {
 	struct bf5xx_nand_info *info = to_nand_info(pdev);
-	struct mtd_info *mtd = NULL;
-
-	platform_set_drvdata(pdev, NULL);
 
 	/* first thing we need to do is release all our mtds
 	 * and their partitions, then go through freeing the
 	 * resources used
 	 */
-	mtd = &info->mtd;
-	if (mtd) {
-		nand_release(mtd);
-		kfree(mtd);
-	}
+	nand_release(&info->mtd);
 
 	peripheral_free_list(bfin_nfc_pin_req);
 	bf5xx_nand_dma_remove(info);
 
-	/* free the common resources */
-	kfree(info);
-
 	return 0;
 }
 
+static int bf5xx_nand_scan(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	int ret;
+
+	ret = nand_scan_ident(mtd, 1, NULL);
+	if (ret)
+		return ret;
+
+	if (hardware_ecc) {
+		/*
+		 * for nand with page size > 512B, think it as several sections with 512B
+		 */
+		if (likely(mtd->writesize >= 512)) {
+			chip->ecc.size = 512;
+			chip->ecc.bytes = 6;
+			chip->ecc.strength = 2;
+		} else {
+			chip->ecc.size = 256;
+			chip->ecc.bytes = 3;
+			chip->ecc.strength = 1;
+			bfin_write_NFC_CTL(bfin_read_NFC_CTL() & ~(1 << NFC_PG_SIZE_OFFSET));
+			SSYNC();
+		}
+	}
+
+	return	nand_scan_tail(mtd);
+}
+
 /*
  * bf5xx_nand_probe
  *
@@ -706,7 +719,7 @@ static int __devexit bf5xx_nand_remove(struct platform_device *pdev)
  * it can allocate all necessary resources then calls the
  * nand layer to look for devices
  */
-static int __devinit bf5xx_nand_probe(struct platform_device *pdev)
+static int bf5xx_nand_probe(struct platform_device *pdev)
 {
 	struct bf5xx_nand_platform *plat = to_nand_plat(pdev);
 	struct bf5xx_nand_info *info = NULL;
@@ -726,11 +739,10 @@ static int __devinit bf5xx_nand_probe(struct platform_device *pdev)
 		return -EFAULT;
 	}
 
-	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
 	if (info == NULL) {
-		dev_err(&pdev->dev, "no memory for flash info\n");
 		err = -ENOMEM;
-		goto out_err_kzalloc;
+		goto out_err;
 	}
 
 	platform_set_drvdata(pdev, info);
@@ -775,39 +787,35 @@ static int __devinit bf5xx_nand_probe(struct platform_device *pdev)
 	/* initialise the hardware */
 	err = bf5xx_nand_hw_init(info);
 	if (err)
-		goto out_err_hw_init;
+		goto out_err;
 
 	/* setup hardware ECC data struct */
 	if (hardware_ecc) {
 #ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
-		chip->badblock_pattern = &bootrom_bbt;
 		chip->ecc.layout = &bootrom_ecclayout;
 #endif
-
-		if (plat->page_size == NFC_PG_SIZE_256) {
-			chip->ecc.bytes = 3;
-			chip->ecc.size = 256;
-		} else if (plat->page_size == NFC_PG_SIZE_512) {
-			chip->ecc.bytes = 6;
-			chip->ecc.size = 512;
-		}
-
 		chip->read_buf      = bf5xx_nand_dma_read_buf;
 		chip->write_buf     = bf5xx_nand_dma_write_buf;
 		chip->ecc.calculate = bf5xx_nand_calculate_ecc;
 		chip->ecc.correct   = bf5xx_nand_correct_data;
 		chip->ecc.mode	    = NAND_ECC_HW;
 		chip->ecc.hwctl	    = bf5xx_nand_enable_hwecc;
+		chip->ecc.read_page_raw = bf5xx_nand_read_page_raw;
+		chip->ecc.write_page_raw = bf5xx_nand_write_page_raw;
 	} else {
 		chip->ecc.mode	    = NAND_ECC_SOFT;
 	}
 
 	/* scan hardware nand chip and setup mtd info data struct */
-	if (nand_scan(mtd, 1)) {
+	if (bf5xx_nand_scan(mtd)) {
 		err = -ENXIO;
 		goto out_err_nand_scan;
 	}
 
+#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
+	chip->badblockpos = 63;
+#endif
+
 	/* add NAND partition */
 	bf5xx_nand_add_partition(info);
 
@@ -816,10 +824,7 @@ static int __devinit bf5xx_nand_probe(struct platform_device *pdev)
 
 out_err_nand_scan:
 	bf5xx_nand_dma_remove(info);
-out_err_hw_init:
-	platform_set_drvdata(pdev, NULL);
-	kfree(info);
-out_err_kzalloc:
+out_err:
 	peripheral_free_list(bfin_nfc_pin_req);
 
 	return err;
@@ -850,7 +855,7 @@ static int bf5xx_nand_resume(struct platform_device *dev)
 /* driver device registration */
 static struct platform_driver bf5xx_nand_driver = {
 	.probe		= bf5xx_nand_probe,
-	.remove		= __devexit_p(bf5xx_nand_remove),
+	.remove		= bf5xx_nand_remove,
 	.suspend	= bf5xx_nand_suspend,
 	.resume		= bf5xx_nand_resume,
 	.driver		= {
@@ -859,21 +864,7 @@ static struct platform_driver bf5xx_nand_driver = {
 	},
 };
 
-static int __init bf5xx_nand_init(void)
-{
-	printk(KERN_INFO "%s, Version %s (c) 2007 Analog Devices, Inc.\n",
-		DRV_DESC, DRV_VERSION);
-
-	return platform_driver_register(&bf5xx_nand_driver);
-}
-
-static void __exit bf5xx_nand_exit(void)
-{
-	platform_driver_unregister(&bf5xx_nand_driver);
-}
-
-module_init(bf5xx_nand_init);
-module_exit(bf5xx_nand_exit);
+module_platform_driver(bf5xx_nand_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR(DRV_AUTHOR);
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index db1dfc5a1b1..4e66726da9a 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -2,7 +2,7 @@
  * Driver for One Laptop Per Child ‘CAFÉ’ controller, aka Marvell 88ALP01
  *
  * The data sheet for this device can be found at:
- *    http://www.marvell.com/products/pcconn/88ALP01.jsp
+ *    http://wiki.laptop.org/go/Datasheets 
  *
  * Copyright © 2006 Red Hat, Inc.
  * Copyright © 2006 David Woodhouse <dwmw2@infradead.org>
@@ -21,6 +21,7 @@
 #include <linux/interrupt.h>
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <asm/io.h>
 
 #define CAFE_NAND_CTRL1		0x00
@@ -57,7 +58,6 @@
 
 struct cafe_priv {
 	struct nand_chip nand;
-	struct mtd_partition *parts;
 	struct pci_dev *pdev;
 	void __iomem *mmio;
 	struct rs_control *rs;
@@ -90,9 +90,7 @@ static unsigned int numtimings;
 static int timing[3];
 module_param_array(timing, int, &numtimings, 0644);
 
-#ifdef CONFIG_MTD_PARTITIONS
 static const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
-#endif
 
 /* Hrm. Why isn't this already conditional on something in the struct device? */
 #define cafe_dev_dbg(dev, args...) do { if (debug) dev_dbg(dev, ##args); } while(0)
@@ -104,7 +102,7 @@ static const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
 static int cafe_device_ready(struct mtd_info *mtd)
 {
 	struct cafe_priv *cafe = mtd->priv;
-	int result = !!(cafe_readl(cafe, NAND_STATUS) | 0x40000000);
+	int result = !!(cafe_readl(cafe, NAND_STATUS) & 0x40000000);
 	uint32_t irqs = cafe_readl(cafe, NAND_IRQ);
 
 	cafe_writel(cafe, irqs, NAND_IRQ);
@@ -305,13 +303,7 @@ static void cafe_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
 	case NAND_CMD_SEQIN:
 	case NAND_CMD_RNDIN:
 	case NAND_CMD_STATUS:
-	case NAND_CMD_DEPLETE1:
 	case NAND_CMD_RNDOUT:
-	case NAND_CMD_STATUS_ERROR:
-	case NAND_CMD_STATUS_ERROR0:
-	case NAND_CMD_STATUS_ERROR1:
-	case NAND_CMD_STATUS_ERROR2:
-	case NAND_CMD_STATUS_ERROR3:
 		cafe_writel(cafe, cafe->ctl2, NAND_CTRL2);
 		return;
 	}
@@ -366,25 +358,27 @@ static int cafe_nand_write_oob(struct mtd_info *mtd,
 
 /* Don't use -- use nand_read_oob_std for now */
 static int cafe_nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
-			      int page, int sndcmd)
+			      int page)
 {
 	chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
 	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-	return 1;
+	return 0;
 }
 /**
- * cafe_nand_read_page_syndrome - {REPLACABLE] hardware ecc syndrom based page read
+ * cafe_nand_read_page_syndrome - [REPLACEABLE] hardware ecc syndrome based page read
  * @mtd:	mtd info structure
  * @chip:	nand chip info structure
  * @buf:	buffer to store read data
+ * @oob_required:	caller expects OOB data read to chip->oob_poi
  *
- * The hw generator calculates the error syndrome automatically. Therefor
+ * The hw generator calculates the error syndrome automatically. Therefore
  * we need a special oob layout and handling.
  */
 static int cafe_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
-			       uint8_t *buf, int page)
+			       uint8_t *buf, int oob_required, int page)
 {
 	struct cafe_priv *cafe = mtd->priv;
+	unsigned int max_bitflips = 0;
 
 	cafe_dev_dbg(&cafe->pdev->dev, "ECC result %08x SYN1,2 %08x\n",
 		     cafe_readl(cafe, NAND_ECC_RESULT),
@@ -451,10 +445,11 @@ static int cafe_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 		} else {
 			dev_dbg(&cafe->pdev->dev, "Corrected %d symbol errors\n", n);
 			mtd->ecc_stats.corrected += n;
+			max_bitflips = max_t(unsigned int, max_bitflips, n);
 		}
 	}
 
-	return 0;
+	return max_bitflips;
 }
 
 static struct nand_ecclayout cafe_oobinfo_2048 = {
@@ -519,8 +514,9 @@ static struct nand_bbt_descr cafe_bbt_mirror_descr_512 = {
 };
 
 
-static void cafe_nand_write_page_lowlevel(struct mtd_info *mtd,
-					  struct nand_chip *chip, const uint8_t *buf)
+static int cafe_nand_write_page_lowlevel(struct mtd_info *mtd,
+					  struct nand_chip *chip,
+					  const uint8_t *buf, int oob_required)
 {
 	struct cafe_priv *cafe = mtd->priv;
 
@@ -529,19 +525,25 @@ static void cafe_nand_write_page_lowlevel(struct mtd_info *mtd,
 
 	/* Set up ECC autogeneration */
 	cafe->ctl2 |= (1<<30);
+
+	return 0;
 }
 
 static int cafe_nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
-				const uint8_t *buf, int page, int cached, int raw)
+			uint32_t offset, int data_len, const uint8_t *buf,
+			int oob_required, int page, int cached, int raw)
 {
 	int status;
 
 	chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
 
 	if (unlikely(raw))
-		chip->ecc.write_page_raw(mtd, chip, buf);
+		status = chip->ecc.write_page_raw(mtd, chip, buf, oob_required);
 	else
-		chip->ecc.write_page(mtd, chip, buf);
+		status = chip->ecc.write_page(mtd, chip, buf, oob_required);
+
+	if (status < 0)
+		return status;
 
 	/*
 	 * Cached progamming disabled for now, Not sure if its worth the
@@ -568,13 +570,6 @@ static int cafe_nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
 		status = chip->waitfunc(mtd, chip);
 	}
 
-#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
-	/* Send command to read back the data */
-	chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
-
-	if (chip->verify_buf(mtd, buf, mtd->writesize))
-		return -EIO;
-#endif
 	return 0;
 }
 
@@ -584,7 +579,7 @@ static int cafe_nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
 }
 
 /* F_2[X]/(X**6+X+1)  */
-static unsigned short __devinit gf64_mul(u8 a, u8 b)
+static unsigned short gf64_mul(u8 a, u8 b)
 {
 	u8 c;
 	unsigned int i;
@@ -603,7 +598,7 @@ static unsigned short __devinit gf64_mul(u8 a, u8 b)
 }
 
 /* F_64[X]/(X**2+X+A**-1) with A the generator of F_64[X]  */
-static u16 __devinit gf4096_mul(u16 a, u16 b)
+static u16 gf4096_mul(u16 a, u16 b)
 {
 	u8 ah, al, bh, bl, ch, cl;
 
@@ -618,24 +613,22 @@ static u16 __devinit gf4096_mul(u16 a, u16 b)
 	return (ch << 6) ^ cl;
 }
 
-static int __devinit cafe_mul(int x)
+static int cafe_mul(int x)
 {
 	if (x == 0)
 		return 1;
 	return gf4096_mul(x, 0xe01);
 }
 
-static int __devinit cafe_nand_probe(struct pci_dev *pdev,
+static int cafe_nand_probe(struct pci_dev *pdev,
 				     const struct pci_device_id *ent)
 {
 	struct mtd_info *mtd;
 	struct cafe_priv *cafe;
 	uint32_t ctrl;
 	int err = 0;
-#ifdef CONFIG_MTD_PARTITIONS
-	struct mtd_partition *parts;
-	int nr_parts;
-#endif
+	int old_dma;
+	struct nand_buffers *nbuf;
 
 	/* Very old versions shared the same PCI ident for all three
 	   functions on the chip. Verify the class too... */
@@ -649,10 +642,8 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
 	pci_set_master(pdev);
 
 	mtd = kzalloc(sizeof(*mtd) + sizeof(struct cafe_priv), GFP_KERNEL);
-	if (!mtd) {
-		dev_warn(&pdev->dev, "failed to alloc mtd_info\n");
+	if (!mtd)
 		return  -ENOMEM;
-	}
 	cafe = (void *)(&mtd[1]);
 
 	mtd->dev.parent = &pdev->dev;
@@ -666,13 +657,6 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
 		err = -ENOMEM;
 		goto out_free_mtd;
 	}
-	cafe->dmabuf = dma_alloc_coherent(&cafe->pdev->dev, 2112 + sizeof(struct nand_buffers),
-					  &cafe->dmaaddr, GFP_KERNEL);
-	if (!cafe->dmabuf) {
-		err = -ENOMEM;
-		goto out_ior;
-	}
-	cafe->nand.buffers = (void *)cafe->dmabuf + 2112;
 
 	cafe->rs = init_rs_non_canonical(12, &cafe_mul, 0, 1, 8);
 	if (!cafe->rs) {
@@ -690,7 +674,8 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
 	cafe->nand.chip_delay = 0;
 
 	/* Enable the following for a flash based bad block table */
-	cafe->nand.options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR | NAND_OWN_BUFFERS;
+	cafe->nand.bbt_options = NAND_BBT_USE_FLASH;
+	cafe->nand.options = NAND_OWN_BUFFERS;
 
 	if (skipbbt) {
 		cafe->nand.options |= NAND_SKIP_BBTSCAN;
@@ -731,7 +716,7 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
 			  "CAFE NAND", mtd);
 	if (err) {
 		dev_warn(&pdev->dev, "Could not register IRQ %d\n", pdev->irq);
-		goto out_free_dma;
+		goto out_ior;
 	}
 
 	/* Disable master reset, enable NAND clock */
@@ -745,6 +730,32 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
 	cafe_writel(cafe, 0x7006, GLOBAL_CTRL);
 	cafe_writel(cafe, 0x700a, GLOBAL_CTRL);
 
+	/* Enable NAND IRQ in global IRQ mask register */
+	cafe_writel(cafe, 0x80000007, GLOBAL_IRQ_MASK);
+	cafe_dev_dbg(&cafe->pdev->dev, "Control %x, IRQ mask %x\n",
+		cafe_readl(cafe, GLOBAL_CTRL),
+		cafe_readl(cafe, GLOBAL_IRQ_MASK));
+
+	/* Do not use the DMA for the nand_scan_ident() */
+	old_dma = usedma;
+	usedma = 0;
+
+	/* Scan to find existence of the device */
+	if (nand_scan_ident(mtd, 2, NULL)) {
+		err = -ENXIO;
+		goto out_irq;
+	}
+
+	cafe->dmabuf = dma_alloc_coherent(&cafe->pdev->dev,
+				2112 + sizeof(struct nand_buffers) +
+				mtd->writesize + mtd->oobsize,
+				&cafe->dmaaddr, GFP_KERNEL);
+	if (!cafe->dmabuf) {
+		err = -ENOMEM;
+		goto out_irq;
+	}
+	cafe->nand.buffers = nbuf = (void *)cafe->dmabuf + 2112;
+
 	/* Set up DMA address */
 	cafe_writel(cafe, cafe->dmaaddr & 0xffffffff, NAND_DMA_ADDR0);
 	if (sizeof(cafe->dmaaddr) > 4)
@@ -756,16 +767,13 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
 	cafe_dev_dbg(&cafe->pdev->dev, "Set DMA address to %x (virt %p)\n",
 		cafe_readl(cafe, NAND_DMA_ADDR0), cafe->dmabuf);
 
-	/* Enable NAND IRQ in global IRQ mask register */
-	cafe_writel(cafe, 0x80000007, GLOBAL_IRQ_MASK);
-	cafe_dev_dbg(&cafe->pdev->dev, "Control %x, IRQ mask %x\n",
-		cafe_readl(cafe, GLOBAL_CTRL), cafe_readl(cafe, GLOBAL_IRQ_MASK));
+	/* this driver does not need the @ecccalc and @ecccode */
+	nbuf->ecccalc = NULL;
+	nbuf->ecccode = NULL;
+	nbuf->databuf = (uint8_t *)(nbuf + 1);
 
-	/* Scan to find existence of the device */
-	if (nand_scan_ident(mtd, 2, NULL)) {
-		err = -ENXIO;
-		goto out_irq;
-	}
+	/* Restore the DMA flag */
+	usedma = old_dma;
 
 	cafe->ctl2 = 1<<27; /* Reed-Solomon ECC */
 	if (mtd->writesize == 2048)
@@ -783,11 +791,12 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
 	} else {
 		printk(KERN_WARNING "Unexpected NAND flash writesize %d. Aborting\n",
 		       mtd->writesize);
-		goto out_irq;
+		goto out_free_dma;
 	}
 	cafe->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
 	cafe->nand.ecc.size = mtd->writesize;
 	cafe->nand.ecc.bytes = 14;
+	cafe->nand.ecc.strength = 4;
 	cafe->nand.ecc.hwctl  = (void *)cafe_nand_bug;
 	cafe->nand.ecc.calculate = (void *)cafe_nand_bug;
 	cafe->nand.ecc.correct  = (void *)cafe_nand_bug;
@@ -799,32 +808,24 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
 
 	err = nand_scan_tail(mtd);
 	if (err)
-		goto out_irq;
+		goto out_free_dma;
 
 	pci_set_drvdata(pdev, mtd);
 
-	/* We register the whole device first, separate from the partitions */
-	add_mtd_device(mtd);
-
-#ifdef CONFIG_MTD_PARTITIONS
-#ifdef CONFIG_MTD_CMDLINE_PARTS
 	mtd->name = "cafe_nand";
-#endif
-	nr_parts = parse_mtd_partitions(mtd, part_probes, &parts, 0);
-	if (nr_parts > 0) {
-		cafe->parts = parts;
-		dev_info(&cafe->pdev->dev, "%d partitions found\n", nr_parts);
-		add_mtd_partitions(mtd, parts, nr_parts);
-	}
-#endif
+	mtd_device_parse_register(mtd, part_probes, NULL, NULL, 0);
+
 	goto out;
 
+ out_free_dma:
+	dma_free_coherent(&cafe->pdev->dev,
+			2112 + sizeof(struct nand_buffers) +
+			mtd->writesize + mtd->oobsize,
+			cafe->dmabuf, cafe->dmaaddr);
  out_irq:
 	/* Disable NAND IRQ in global IRQ mask register */
 	cafe_writel(cafe, ~1 & cafe_readl(cafe, GLOBAL_IRQ_MASK), GLOBAL_IRQ_MASK);
 	free_irq(pdev->irq, mtd);
- out_free_dma:
-	dma_free_coherent(&cafe->pdev->dev, 2112, cafe->dmabuf, cafe->dmaaddr);
  out_ior:
 	pci_iounmap(pdev, cafe->mmio);
  out_free_mtd:
@@ -833,19 +834,21 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
 	return err;
 }
 
-static void __devexit cafe_nand_remove(struct pci_dev *pdev)
+static void cafe_nand_remove(struct pci_dev *pdev)
 {
 	struct mtd_info *mtd = pci_get_drvdata(pdev);
 	struct cafe_priv *cafe = mtd->priv;
 
-	del_mtd_device(mtd);
 	/* Disable NAND IRQ in global IRQ mask register */
 	cafe_writel(cafe, ~1 & cafe_readl(cafe, GLOBAL_IRQ_MASK), GLOBAL_IRQ_MASK);
 	free_irq(pdev->irq, mtd);
 	nand_release(mtd);
 	free_rs(cafe->rs);
 	pci_iounmap(pdev, cafe->mmio);
-	dma_free_coherent(&cafe->pdev->dev, 2112, cafe->dmabuf, cafe->dmaaddr);
+	dma_free_coherent(&cafe->pdev->dev,
+			2112 + sizeof(struct nand_buffers) +
+			mtd->writesize + mtd->oobsize,
+			cafe->dmabuf, cafe->dmaaddr);
 	kfree(mtd);
 }
 
@@ -900,21 +903,11 @@ static struct pci_driver cafe_nand_pci_driver = {
 	.name = "CAFÉ NAND",
 	.id_table = cafe_nand_tbl,
 	.probe = cafe_nand_probe,
-	.remove = __devexit_p(cafe_nand_remove),
+	.remove = cafe_nand_remove,
 	.resume = cafe_nand_resume,
 };
 
-static int __init cafe_nand_init(void)
-{
-	return pci_register_driver(&cafe_nand_pci_driver);
-}
-
-static void __exit cafe_nand_exit(void)
-{
-	pci_unregister_driver(&cafe_nand_pci_driver);
-}
-module_init(cafe_nand_init);
-module_exit(cafe_nand_exit);
+module_pci_driver(cafe_nand_pci_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c
index 6e649527825..66ec95e6ca6 100644
--- a/drivers/mtd/nand/cmx270_nand.c
+++ b/drivers/mtd/nand/cmx270_nand.c
@@ -22,6 +22,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/slab.h>
 #include <linux/gpio.h>
+#include <linux/module.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -50,8 +51,6 @@ static struct mtd_partition partition_info[] = {
 };
 #define NUM_PARTITIONS (ARRAY_SIZE(partition_info))
 
-const char *part_probes[] = { "cmdlinepart", NULL };
-
 static u_char cmx270_read_byte(struct mtd_info *mtd)
 {
 	struct nand_chip *this = mtd->priv;
@@ -77,18 +76,6 @@ static void cmx270_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 		*buf++ = readl(this->IO_ADDR_R) >> 16;
 }
 
-static int cmx270_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
-{
-	int i;
-	struct nand_chip *this = mtd->priv;
-
-	for (i=0; i<len; i++)
-		if (buf[i] != (u_char)(readl(this->IO_ADDR_R) >> 16))
-			return -EFAULT;
-
-	return 0;
-}
-
 static inline void nand_cs_on(void)
 {
 	gpio_set_value(GPIO_NAND_CS, 0);
@@ -151,9 +138,6 @@ static int cmx270_device_ready(struct mtd_info *mtd)
 static int __init cmx270_init(void)
 {
 	struct nand_chip *this;
-	const char *part_type;
-	struct mtd_partition *mtd_parts;
-	int mtd_parts_nb = 0;
 	int ret;
 
 	if (!(machine_is_armcore() && cpu_is_pxa27x()))
@@ -180,7 +164,6 @@ static int __init cmx270_init(void)
 				  sizeof(struct nand_chip),
 				  GFP_KERNEL);
 	if (!cmx270_nand_mtd) {
-		pr_debug("Unable to allocate CM-X270 NAND MTD device structure.\n");
 		ret = -ENOMEM;
 		goto err_kzalloc;
 	}
@@ -213,7 +196,6 @@ static int __init cmx270_init(void)
 	this->read_byte = cmx270_read_byte;
 	this->read_buf = cmx270_read_buf;
 	this->write_buf = cmx270_write_buf;
-	this->verify_buf = cmx270_verify_buf;
 
 	/* Scan to find existence of the device */
 	if (nand_scan (cmx270_nand_mtd, 1)) {
@@ -222,23 +204,9 @@ static int __init cmx270_init(void)
 		goto err_scan;
 	}
 
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-	mtd_parts_nb = parse_mtd_partitions(cmx270_nand_mtd, part_probes,
-					    &mtd_parts, 0);
-	if (mtd_parts_nb > 0)
-		part_type = "command line";
-	else
-		mtd_parts_nb = 0;
-#endif
-	if (!mtd_parts_nb) {
-		mtd_parts = partition_info;
-		mtd_parts_nb = NUM_PARTITIONS;
-		part_type = "static";
-	}
-
 	/* Register the partitions */
-	pr_notice("Using %s partition definition\n", part_type);
-	ret = add_mtd_partitions(cmx270_nand_mtd, mtd_parts, mtd_parts_nb);
+	ret = mtd_device_parse_register(cmx270_nand_mtd, NULL, NULL,
+					partition_info, NUM_PARTITIONS);
 	if (ret)
 		goto err_scan;
 
diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c
index 9f1b451005c..88109d375ae 100644
--- a/drivers/mtd/nand/cs553x_nand.c
+++ b/drivers/mtd/nand/cs553x_nand.c
@@ -197,9 +197,8 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr)
 	}
 
 	/* Allocate memory for MTD device structure and private data */
-	new_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
+	new_mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
 	if (!new_mtd) {
-		printk(KERN_WARNING "Unable to allocate CS553X NAND MTD device structure.\n");
 		err = -ENOMEM;
 		goto out;
 	}
@@ -207,10 +206,6 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr)
 	/* Get pointer to private data */
 	this = (struct nand_chip *)(&new_mtd[1]);
 
-	/* Initialize structures */
-	memset(new_mtd, 0, sizeof(struct mtd_info));
-	memset(this, 0, sizeof(struct nand_chip));
-
 	/* Link the private data with the MTD structure */
 	new_mtd->priv = this;
 	new_mtd->owner = THIS_MODULE;
@@ -237,11 +232,12 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr)
 	this->ecc.hwctl  = cs_enable_hwecc;
 	this->ecc.calculate = cs_calculate_ecc;
 	this->ecc.correct  = nand_correct_data;
+	this->ecc.strength = 1;
 
 	/* Enable the following for a flash based bad block table */
-	this->options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR;
+	this->bbt_options = NAND_BBT_USE_FLASH;
 
-	/* Scan to find existance of the device */
+	/* Scan to find existence of the device */
 	if (nand_scan(new_mtd, 1)) {
 		err = -ENXIO;
 		goto out_ior;
@@ -277,23 +273,12 @@ static int is_geode(void)
 	return 0;
 }
 
-
-#ifdef CONFIG_MTD_PARTITIONS
-static const char *part_probes[] = { "cmdlinepart", NULL };
-#endif
-
-
 static int __init cs553x_init(void)
 {
 	int err = -ENXIO;
 	int i;
 	uint64_t val;
 
-#ifdef CONFIG_MTD_PARTITIONS
-	int mtd_parts_nb = 0;
-	struct mtd_partition *mtd_parts = NULL;
-#endif
-
 	/* If the CPU isn't a Geode GX or LX, abort */
 	if (!is_geode())
 		return -ENXIO;
@@ -322,19 +307,9 @@ static int __init cs553x_init(void)
 	   do mtdconcat etc. if we want to. */
 	for (i = 0; i < NR_CS553X_CONTROLLERS; i++) {
 		if (cs553x_mtd[i]) {
-
 			/* If any devices registered, return success. Else the last error. */
-#ifdef CONFIG_MTD_PARTITIONS
-			mtd_parts_nb = parse_mtd_partitions(cs553x_mtd[i], part_probes, &mtd_parts, 0);
-			if (mtd_parts_nb > 0) {
-				printk(KERN_NOTICE "Using command line partition definition\n");
-				add_mtd_partitions(cs553x_mtd[i], mtd_parts, mtd_parts_nb);
-			} else {
-				add_mtd_device(cs553x_mtd[i]);
-			}
-#else
-			add_mtd_device(cs553x_mtd[i]);
-#endif
+			mtd_device_parse_register(cs553x_mtd[i], NULL, NULL,
+						  NULL, 0);
 			err = 0;
 		}
 	}
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 9c9d893affe..b922c8efcf4 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -24,7 +24,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/err.h>
@@ -33,11 +32,12 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/slab.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/of_mtd.h>
 
-#include <mach/nand.h>
-
-#include <asm/mach-types.h>
-
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
 
 /*
  * This is a device driver for the NAND flash controller found on the
@@ -59,7 +59,6 @@ struct davinci_nand_info {
 
 	struct device		*dev;
 	struct clk		*clk;
-	bool			partitioned;
 
 	bool			is_readmode;
 
@@ -74,6 +73,8 @@ struct davinci_nand_info {
 	uint32_t		mask_cle;
 
 	uint32_t		core_chipsel;
+
+	struct davinci_aemif_timing	*timing;
 };
 
 static DEFINE_SPINLOCK(davinci_nand_lock);
@@ -311,7 +312,9 @@ static int nand_davinci_correct_4bit(struct mtd_info *mtd,
 	unsigned short ecc10[8];
 	unsigned short *ecc16;
 	u32 syndrome[4];
+	u32 ecc_state;
 	unsigned num_errors, corrected;
+	unsigned long timeo;
 
 	/* All bytes 0xff?  It's an erased page; ignore its ECC. */
 	for (i = 0; i < 10; i++) {
@@ -361,6 +364,23 @@ compare:
 	 */
 	davinci_nand_writel(info, NANDFCR_OFFSET,
 			davinci_nand_readl(info, NANDFCR_OFFSET) | BIT(13));
+
+	/*
+	 * ECC_STATE field reads 0x3 (Error correction complete) immediately
+	 * after setting the 4BITECC_ADD_CALC_START bit. So if you immediately
+	 * begin trying to poll for the state, you may fall right out of your
+	 * loop without any of the correction calculations having taken place.
+	 * The recommendation from the hardware team is to initially delay as
+	 * long as ECC_STATE reads less than 4. After that, ECC HW has entered
+	 * correction state.
+	 */
+	timeo = jiffies + usecs_to_jiffies(100);
+	do {
+		ecc_state = (davinci_nand_readl(info,
+				NANDFSR_OFFSET) >> 8) & 0x0f;
+		cpu_relax();
+	} while ((ecc_state < 4) && time_before(jiffies, timeo));
+
 	for (;;) {
 		u32	fsr = davinci_nand_readl(info, NANDFSR_OFFSET);
 
@@ -461,43 +481,13 @@ static int nand_davinci_dev_ready(struct mtd_info *mtd)
 	return davinci_nand_readl(info, NANDFSR_OFFSET) & BIT(0);
 }
 
-static void __init nand_dm6446evm_flash_init(struct davinci_nand_info *info)
-{
-	uint32_t regval, a1cr;
-
-	/*
-	 * NAND FLASH timings @ PLL1 == 459 MHz
-	 *  - AEMIF.CLK freq   = PLL1/6 = 459/6 = 76.5 MHz
-	 *  - AEMIF.CLK period = 1/76.5 MHz = 13.1 ns
-	 */
-	regval = 0
-		| (0 << 31)           /* selectStrobe */
-		| (0 << 30)           /* extWait (never with NAND) */
-		| (1 << 26)           /* writeSetup      10 ns */
-		| (3 << 20)           /* writeStrobe     40 ns */
-		| (1 << 17)           /* writeHold       10 ns */
-		| (0 << 13)           /* readSetup       10 ns */
-		| (3 << 7)            /* readStrobe      60 ns */
-		| (0 << 4)            /* readHold        10 ns */
-		| (3 << 2)            /* turnAround      ?? ns */
-		| (0 << 0)            /* asyncSize       8-bit bus */
-		;
-	a1cr = davinci_nand_readl(info, A1CR_OFFSET);
-	if (a1cr != regval) {
-		dev_dbg(info->dev, "Warning: NAND config: Set A1CR " \
-		       "reg to 0x%08x, was 0x%08x, should be done by " \
-		       "bootloader.\n", regval, a1cr);
-		davinci_nand_writel(info, A1CR_OFFSET, regval);
-	}
-}
-
 /*----------------------------------------------------------------------*/
 
 /* An ECC layout for using 4-bit ECC with small-page flash, storing
  * ten ECC bytes plus the manufacturer's bad block marker byte, and
  * and not overlapping the default BBT markers.
  */
-static struct nand_ecclayout hwecc4_small __initconst = {
+static struct nand_ecclayout hwecc4_small = {
 	.eccbytes = 10,
 	.eccpos = { 0, 1, 2, 3, 4,
 		/* offset 5 holds the badblock marker */
@@ -513,7 +503,7 @@ static struct nand_ecclayout hwecc4_small __initconst = {
  * storing ten ECC bytes plus the manufacturer's bad block marker byte,
  * and not overlapping the default BBT markers.
  */
-static struct nand_ecclayout hwecc4_2048 __initconst = {
+static struct nand_ecclayout hwecc4_2048 = {
 	.eccbytes = 40,
 	.eccpos = {
 		/* at the end of spare sector */
@@ -530,9 +520,88 @@ static struct nand_ecclayout hwecc4_2048 __initconst = {
 	},
 };
 
-static int __init nand_davinci_probe(struct platform_device *pdev)
+#if defined(CONFIG_OF)
+static const struct of_device_id davinci_nand_of_match[] = {
+	{.compatible = "ti,davinci-nand", },
+	{.compatible = "ti,keystone-nand", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, davinci_nand_of_match);
+
+static struct davinci_nand_pdata
+	*nand_davinci_get_pdata(struct platform_device *pdev)
+{
+	if (!dev_get_platdata(&pdev->dev) && pdev->dev.of_node) {
+		struct davinci_nand_pdata *pdata;
+		const char *mode;
+		u32 prop;
+
+		pdata =  devm_kzalloc(&pdev->dev,
+				sizeof(struct davinci_nand_pdata),
+				GFP_KERNEL);
+		pdev->dev.platform_data = pdata;
+		if (!pdata)
+			return ERR_PTR(-ENOMEM);
+		if (!of_property_read_u32(pdev->dev.of_node,
+			"ti,davinci-chipselect", &prop))
+			pdev->id = prop;
+		else
+			return ERR_PTR(-EINVAL);
+
+		if (!of_property_read_u32(pdev->dev.of_node,
+			"ti,davinci-mask-ale", &prop))
+			pdata->mask_ale = prop;
+		if (!of_property_read_u32(pdev->dev.of_node,
+			"ti,davinci-mask-cle", &prop))
+			pdata->mask_cle = prop;
+		if (!of_property_read_u32(pdev->dev.of_node,
+			"ti,davinci-mask-chipsel", &prop))
+			pdata->mask_chipsel = prop;
+		if (!of_property_read_string(pdev->dev.of_node,
+			"nand-ecc-mode", &mode) ||
+		    !of_property_read_string(pdev->dev.of_node,
+			"ti,davinci-ecc-mode", &mode)) {
+			if (!strncmp("none", mode, 4))
+				pdata->ecc_mode = NAND_ECC_NONE;
+			if (!strncmp("soft", mode, 4))
+				pdata->ecc_mode = NAND_ECC_SOFT;
+			if (!strncmp("hw", mode, 2))
+				pdata->ecc_mode = NAND_ECC_HW;
+		}
+		if (!of_property_read_u32(pdev->dev.of_node,
+			"ti,davinci-ecc-bits", &prop))
+			pdata->ecc_bits = prop;
+
+		prop = of_get_nand_bus_width(pdev->dev.of_node);
+		if (0 < prop || !of_property_read_u32(pdev->dev.of_node,
+			"ti,davinci-nand-buswidth", &prop))
+			if (prop == 16)
+				pdata->options |= NAND_BUSWIDTH_16;
+		if (of_property_read_bool(pdev->dev.of_node,
+			"nand-on-flash-bbt") ||
+		    of_property_read_bool(pdev->dev.of_node,
+			"ti,davinci-nand-use-bbt"))
+			pdata->bbt_options = NAND_BBT_USE_FLASH;
+
+		if (of_device_is_compatible(pdev->dev.of_node,
+					    "ti,keystone-nand")) {
+			pdata->options |= NAND_NO_SUBPAGE_WRITE;
+		}
+	}
+
+	return dev_get_platdata(&pdev->dev);
+}
+#else
+static struct davinci_nand_pdata
+	*nand_davinci_get_pdata(struct platform_device *pdev)
+{
+	return dev_get_platdata(&pdev->dev);
+}
+#endif
+
+static int nand_davinci_probe(struct platform_device *pdev)
 {
-	struct davinci_nand_pdata	*pdata = pdev->dev.platform_data;
+	struct davinci_nand_pdata	*pdata;
 	struct davinci_nand_info	*info;
 	struct resource			*res1;
 	struct resource			*res2;
@@ -542,6 +611,10 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 	uint32_t			val;
 	nand_ecc_modes_t		ecc_mode;
 
+	pdata = nand_davinci_get_pdata(pdev);
+	if (IS_ERR(pdata))
+		return PTR_ERR(pdata);
+
 	/* insist on board-specific configuration */
 	if (!pdata)
 		return -ENODEV;
@@ -550,12 +623,9 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 	if (pdev->id < 0 || pdev->id > 3)
 		return -ENODEV;
 
-	info = kzalloc(sizeof(*info), GFP_KERNEL);
-	if (!info) {
-		dev_err(&pdev->dev, "unable to allocate memory\n");
-		ret = -ENOMEM;
-		goto err_nomem;
-	}
+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
 
 	platform_set_drvdata(pdev, info);
 
@@ -563,16 +633,23 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 	res2 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	if (!res1 || !res2) {
 		dev_err(&pdev->dev, "resource missing\n");
-		ret = -EINVAL;
-		goto err_nomem;
+		return -EINVAL;
 	}
 
-	vaddr = ioremap(res1->start, resource_size(res1));
-	base = ioremap(res2->start, resource_size(res2));
-	if (!vaddr || !base) {
-		dev_err(&pdev->dev, "ioremap failed\n");
-		ret = -EINVAL;
-		goto err_ioremap;
+	vaddr = devm_ioremap_resource(&pdev->dev, res1);
+	if (IS_ERR(vaddr))
+		return PTR_ERR(vaddr);
+
+	/*
+	 * This registers range is used to setup NAND settings. In case with
+	 * TI AEMIF driver, the same memory address range is requested already
+	 * by AEMIF, so we cannot request it twice, just ioremap.
+	 * The AEMIF and NAND drivers not use the same registers in this range.
+	 */
+	base = devm_ioremap(&pdev->dev, res2->start, resource_size(res2));
+	if (!base) {
+		dev_err(&pdev->dev, "ioremap failed for resource %pR\n", res2);
+		return -EADDRNOTAVAIL;
 	}
 
 	info->dev		= &pdev->dev;
@@ -590,10 +667,13 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 	info->chip.chip_delay	= 0;
 	info->chip.select_chip	= nand_davinci_select_chip;
 
-	/* options such as NAND_USE_FLASH_BBT or 16-bit widths */
+	/* options such as NAND_BBT_USE_FLASH */
+	info->chip.bbt_options	= pdata->bbt_options;
+	/* options such as 16-bit widths */
 	info->chip.options	= pdata->options;
 	info->chip.bbt_td	= pdata->bbt_td;
 	info->chip.bbt_md	= pdata->bbt_md;
+	info->timing		= pdata->timing;
 
 	info->ioaddr		= (uint32_t __force) vaddr;
 
@@ -637,7 +717,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 			spin_unlock_irq(&davinci_nand_lock);
 
 			if (ret == -EBUSY)
-				goto err_ecc;
+				return ret;
 
 			info->chip.ecc.calculate = nand_davinci_calculate_4bit;
 			info->chip.ecc.correct = nand_davinci_correct_4bit;
@@ -650,37 +730,27 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 			info->chip.ecc.bytes = 3;
 		}
 		info->chip.ecc.size = 512;
+		info->chip.ecc.strength = pdata->ecc_bits;
 		break;
 	default:
-		ret = -EINVAL;
-		goto err_ecc;
+		return -EINVAL;
 	}
 	info->chip.ecc.mode = ecc_mode;
 
-	info->clk = clk_get(&pdev->dev, "aemif");
+	info->clk = devm_clk_get(&pdev->dev, "aemif");
 	if (IS_ERR(info->clk)) {
 		ret = PTR_ERR(info->clk);
 		dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret);
-		goto err_clk;
+		return ret;
 	}
 
-	ret = clk_enable(info->clk);
+	ret = clk_prepare_enable(info->clk);
 	if (ret < 0) {
 		dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n",
 			ret);
 		goto err_clk_enable;
 	}
 
-	/* EMIF timings should normally be set by the boot loader,
-	 * especially after boot-from-NAND.  The *only* reason to
-	 * have this special casing for the DM6446 EVM is to work
-	 * with boot-from-NOR ... with CS0 manually re-jumpered
-	 * (after startup) so it addresses the NAND flash, not NOR.
-	 * Even for dev boards, that's unusually rude...
-	 */
-	if (machine_is_davinci_evm())
-		nand_dm6446evm_flash_init(info);
-
 	spin_lock_irq(&davinci_nand_lock);
 
 	/* put CSxNAND into NAND mode */
@@ -694,7 +764,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 	ret = nand_scan_ident(&info->mtd, pdata->mask_chipsel ? 2 : 1, NULL);
 	if (ret < 0) {
 		dev_dbg(&pdev->dev, "no NAND chip(s) found\n");
-		goto err_scan;
+		goto err;
 	}
 
 	/* Update ECC layout if needed ... for 1-bit HW ECC, the default
@@ -708,7 +778,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 		if (!chunks || info->mtd.oobsize < 16) {
 			dev_dbg(&pdev->dev, "too small\n");
 			ret = -EINVAL;
-			goto err_scan;
+			goto err;
 		}
 
 		/* For small page chips, preserve the manufacturer's
@@ -732,11 +802,14 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 		 * breaks userspace ioctl interface with mtd-utils. Once we
 		 * resolve this issue, NAND_ECC_HW_OOB_FIRST mode can be used
 		 * for the 4KiB page chips.
+		 *
+		 * TODO: Note that nand_ecclayout has now been expanded and can
+		 *  hold plenty of OOB entries.
 		 */
 		dev_warn(&pdev->dev, "no 4-bit ECC support yet "
 				"for 4KiB-page NAND\n");
 		ret = -EIO;
-		goto err_scan;
+		goto err;
 
 syndrome_done:
 		info->chip.ecc.layout = &info->ecclayout;
@@ -744,46 +817,20 @@ syndrome_done:
 
 	ret = nand_scan_tail(&info->mtd);
 	if (ret < 0)
-		goto err_scan;
-
-	if (mtd_has_partitions()) {
-		struct mtd_partition	*mtd_parts = NULL;
-		int			mtd_parts_nb = 0;
+		goto err;
 
-		if (mtd_has_cmdlinepart()) {
-			static const char *probes[] __initconst =
-				{ "cmdlinepart", NULL };
+	if (pdata->parts)
+		ret = mtd_device_parse_register(&info->mtd, NULL, NULL,
+					pdata->parts, pdata->nr_parts);
+	else {
+		struct mtd_part_parser_data	ppdata;
 
-			mtd_parts_nb = parse_mtd_partitions(&info->mtd, probes,
-							    &mtd_parts, 0);
-		}
-
-		if (mtd_parts_nb <= 0) {
-			mtd_parts = pdata->parts;
-			mtd_parts_nb = pdata->nr_parts;
-		}
-
-		/* Register any partitions */
-		if (mtd_parts_nb > 0) {
-			ret = add_mtd_partitions(&info->mtd,
-					mtd_parts, mtd_parts_nb);
-			if (ret == 0)
-				info->partitioned = true;
-		}
-
-	} else if (pdata->nr_parts) {
-		dev_warn(&pdev->dev, "ignoring %d default partitions on %s\n",
-				pdata->nr_parts, info->mtd.name);
+		ppdata.of_node = pdev->dev.of_node;
+		ret = mtd_device_parse_register(&info->mtd, NULL, &ppdata,
+						NULL, 0);
 	}
-
-	/* If there's no partition info, just package the whole chip
-	 * as a single MTD device.
-	 */
-	if (!info->partitioned)
-		ret = add_mtd_device(&info->mtd) ? -ENODEV : 0;
-
 	if (ret < 0)
-		goto err_scan;
+		goto err;
 
 	val = davinci_nand_readl(info, NRCSR_OFFSET);
 	dev_info(&pdev->dev, "controller rev. %d.%d\n",
@@ -791,77 +838,45 @@ syndrome_done:
 
 	return 0;
 
-err_scan:
-	clk_disable(info->clk);
+err:
+	clk_disable_unprepare(info->clk);
 
 err_clk_enable:
-	clk_put(info->clk);
-
 	spin_lock_irq(&davinci_nand_lock);
 	if (ecc_mode == NAND_ECC_HW_SYNDROME)
 		ecc4_busy = false;
 	spin_unlock_irq(&davinci_nand_lock);
-
-err_ecc:
-err_clk:
-err_ioremap:
-	if (base)
-		iounmap(base);
-	if (vaddr)
-		iounmap(vaddr);
-
-err_nomem:
-	kfree(info);
 	return ret;
 }
 
-static int __exit nand_davinci_remove(struct platform_device *pdev)
+static int nand_davinci_remove(struct platform_device *pdev)
 {
 	struct davinci_nand_info *info = platform_get_drvdata(pdev);
-	int status;
-
-	if (mtd_has_partitions() && info->partitioned)
-		status = del_mtd_partitions(&info->mtd);
-	else
-		status = del_mtd_device(&info->mtd);
 
 	spin_lock_irq(&davinci_nand_lock);
 	if (info->chip.ecc.mode == NAND_ECC_HW_SYNDROME)
 		ecc4_busy = false;
 	spin_unlock_irq(&davinci_nand_lock);
 
-	iounmap(info->base);
-	iounmap(info->vaddr);
-
 	nand_release(&info->mtd);
 
-	clk_disable(info->clk);
-	clk_put(info->clk);
-
-	kfree(info);
+	clk_disable_unprepare(info->clk);
 
 	return 0;
 }
 
 static struct platform_driver nand_davinci_driver = {
-	.remove		= __exit_p(nand_davinci_remove),
+	.probe		= nand_davinci_probe,
+	.remove		= nand_davinci_remove,
 	.driver		= {
 		.name	= "davinci_nand",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(davinci_nand_of_match),
 	},
 };
 MODULE_ALIAS("platform:davinci_nand");
 
-static int __init nand_davinci_init(void)
-{
-	return platform_driver_probe(&nand_davinci_driver, nand_davinci_probe);
-}
-module_init(nand_davinci_init);
-
-static void __exit nand_davinci_exit(void)
-{
-	platform_driver_unregister(&nand_davinci_driver);
-}
-module_exit(nand_davinci_exit);
+module_platform_driver(nand_davinci_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Texas Instruments");
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index ca03428b59c..9f2012a3e76 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -16,12 +16,12 @@
  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  *
  */
-
 #include <linux/interrupt.h>
 #include <linux/delay.h>
+#include <linux/dma-mapping.h>
 #include <linux/wait.h>
 #include <linux/mutex.h>
-#include <linux/pci.h>
+#include <linux/slab.h>
 #include <linux/mtd/mtd.h>
 #include <linux/module.h>
 
@@ -29,38 +29,38 @@
 
 MODULE_LICENSE("GPL");
 
-/* We define a module parameter that allows the user to override 
+/* We define a module parameter that allows the user to override
  * the hardware and decide what timing mode should be used.
  */
 #define NAND_DEFAULT_TIMINGS	-1
 
 static int onfi_timing_mode = NAND_DEFAULT_TIMINGS;
 module_param(onfi_timing_mode, int, S_IRUGO);
-MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting. -1 indicates"
-					" use default timings");
+MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting."
+			" -1 indicates use default timings");
 
 #define DENALI_NAND_NAME    "denali-nand"
 
 /* We define a macro here that combines all interrupts this driver uses into
  * a single constant value, for convenience. */
-#define DENALI_IRQ_ALL	(INTR_STATUS0__DMA_CMD_COMP | \
-			INTR_STATUS0__ECC_TRANSACTION_DONE | \
-			INTR_STATUS0__ECC_ERR | \
-			INTR_STATUS0__PROGRAM_FAIL | \
-			INTR_STATUS0__LOAD_COMP | \
-			INTR_STATUS0__PROGRAM_COMP | \
-			INTR_STATUS0__TIME_OUT | \
-			INTR_STATUS0__ERASE_FAIL | \
-			INTR_STATUS0__RST_COMP | \
-			INTR_STATUS0__ERASE_COMP)
-
-/* indicates whether or not the internal value for the flash bank is 
-   valid or not */
-#define CHIP_SELECT_INVALID 	-1
+#define DENALI_IRQ_ALL	(INTR_STATUS__DMA_CMD_COMP | \
+			INTR_STATUS__ECC_TRANSACTION_DONE | \
+			INTR_STATUS__ECC_ERR | \
+			INTR_STATUS__PROGRAM_FAIL | \
+			INTR_STATUS__LOAD_COMP | \
+			INTR_STATUS__PROGRAM_COMP | \
+			INTR_STATUS__TIME_OUT | \
+			INTR_STATUS__ERASE_FAIL | \
+			INTR_STATUS__RST_COMP | \
+			INTR_STATUS__ERASE_COMP)
+
+/* indicates whether or not the internal value for the flash bank is
+ * valid or not */
+#define CHIP_SELECT_INVALID	-1
 
 #define SUPPORT_8BITECC		1
 
-/* This macro divides two integers and rounds fractional values up 
+/* This macro divides two integers and rounds fractional values up
  * to the nearest integer value. */
 #define CEIL_DIV(X, Y) (((X)%(Y)) ? ((X)/(Y)+1) : ((X)/(Y)))
 
@@ -70,7 +70,7 @@ MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting. -1 indicates
 #define mtd_to_denali(m) container_of(m, struct denali_nand_info, mtd)
 
 /* These constants are defined by the driver to enable common driver
-   configuration options. */
+ * configuration options. */
 #define SPARE_ACCESS		0x41
 #define MAIN_ACCESS		0x42
 #define MAIN_SPARE_ACCESS	0x43
@@ -83,85 +83,40 @@ MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting. -1 indicates
 #define ADDR_CYCLE	1
 #define STATUS_CYCLE	2
 
-/* this is a helper macro that allows us to 
+/* this is a helper macro that allows us to
  * format the bank into the proper bits for the controller */
 #define BANK(x) ((x) << 24)
 
-/* List of platforms this NAND controller has be integrated into */
-static const struct pci_device_id denali_pci_ids[] = {
-	{ PCI_VDEVICE(INTEL, 0x0701), INTEL_CE4100 },
-	{ PCI_VDEVICE(INTEL, 0x0809), INTEL_MRST },
-	{ /* end: all zeroes */ }
-};
-
-
-/* these are static lookup tables that give us easy access to 
-   registers in the NAND controller.  
- */
-static const uint32_t intr_status_addresses[4] = {INTR_STATUS0, 
-						  INTR_STATUS1, 
-					     	  INTR_STATUS2, 
-						  INTR_STATUS3};
-
-static const uint32_t device_reset_banks[4] = {DEVICE_RESET__BANK0,
-                                               DEVICE_RESET__BANK1,
-                                               DEVICE_RESET__BANK2,
-                                               DEVICE_RESET__BANK3};
-
-static const uint32_t operation_timeout[4] = {INTR_STATUS0__TIME_OUT,
-                        		      INTR_STATUS1__TIME_OUT,
-		                              INTR_STATUS2__TIME_OUT,
-		                              INTR_STATUS3__TIME_OUT};
-
-static const uint32_t reset_complete[4] = {INTR_STATUS0__RST_COMP,
-                		           INTR_STATUS1__RST_COMP,
-		                           INTR_STATUS2__RST_COMP,
-		                           INTR_STATUS3__RST_COMP};
-
-/* specifies the debug level of the driver */
-static int nand_debug_level = 0;
-
 /* forward declarations */
 static void clear_interrupts(struct denali_nand_info *denali);
-static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask);
-static void denali_irq_enable(struct denali_nand_info *denali, uint32_t int_mask);
+static uint32_t wait_for_irq(struct denali_nand_info *denali,
+							uint32_t irq_mask);
+static void denali_irq_enable(struct denali_nand_info *denali,
+							uint32_t int_mask);
 static uint32_t read_interrupt_status(struct denali_nand_info *denali);
 
-#define DEBUG_DENALI 0
-
-/* This is a wrapper for writing to the denali registers.
- * this allows us to create debug information so we can
- * observe how the driver is programming the device. 
- * it uses standard linux convention for (val, addr) */
-static void denali_write32(uint32_t value, void *addr)
-{
-	iowrite32(value, addr);	
-
-#if DEBUG_DENALI
-	printk(KERN_ERR "wrote: 0x%x -> 0x%x\n", value, (uint32_t)((uint32_t)addr & 0x1fff));
-#endif
-} 
-
-/* Certain operations for the denali NAND controller use an indexed mode to read/write 
-   data. The operation is performed by writing the address value of the command to 
-   the device memory followed by the data. This function abstracts this common 
-   operation. 
+/* Certain operations for the denali NAND controller use
+ * an indexed mode to read/write data. The operation is
+ * performed by writing the address value of the command
+ * to the device memory followed by the data. This function
+ * abstracts this common operation.
 */
-static void index_addr(struct denali_nand_info *denali, uint32_t address, uint32_t data)
+static void index_addr(struct denali_nand_info *denali,
+				uint32_t address, uint32_t data)
 {
-	denali_write32(address, denali->flash_mem);
-	denali_write32(data, denali->flash_mem + 0x10);
+	iowrite32(address, denali->flash_mem);
+	iowrite32(data, denali->flash_mem + 0x10);
 }
 
 /* Perform an indexed read of the device */
 static void index_addr_read_data(struct denali_nand_info *denali,
 				 uint32_t address, uint32_t *pdata)
 {
-	denali_write32(address, denali->flash_mem);
+	iowrite32(address, denali->flash_mem);
 	*pdata = ioread32(denali->flash_mem + 0x10);
 }
 
-/* We need to buffer some data for some of the NAND core routines. 
+/* We need to buffer some data for some of the NAND core routines.
  * The operations manage buffering that data. */
 static void reset_buf(struct denali_nand_info *denali)
 {
@@ -170,7 +125,6 @@ static void reset_buf(struct denali_nand_info *denali)
 
 static void write_byte_to_buf(struct denali_nand_info *denali, uint8_t byte)
 {
-	BUG_ON(denali->buf.tail >= sizeof(denali->buf.buf));
 	denali->buf.buf[denali->buf.tail++] = byte;
 }
 
@@ -182,75 +136,67 @@ static void read_status(struct denali_nand_info *denali)
 	/* initialize the data buffer to store status */
 	reset_buf(denali);
 
-	/* initiate a device status read */
-	cmd = MODE_11 | BANK(denali->flash_bank); 
-	index_addr(denali, cmd | COMMAND_CYCLE, 0x70);
-	denali_write32(cmd | STATUS_CYCLE, denali->flash_mem);
-
-	/* update buffer with status value */
-	write_byte_to_buf(denali, ioread32(denali->flash_mem + 0x10));
-
-#if DEBUG_DENALI
-	printk("device reporting status value of 0x%2x\n", denali->buf.buf[0]);
-#endif
+	cmd = ioread32(denali->flash_reg + WRITE_PROTECT);
+	if (cmd)
+		write_byte_to_buf(denali, NAND_STATUS_WP);
+	else
+		write_byte_to_buf(denali, 0);
 }
 
 /* resets a specific device connected to the core */
 static void reset_bank(struct denali_nand_info *denali)
 {
 	uint32_t irq_status = 0;
-	uint32_t irq_mask = reset_complete[denali->flash_bank] | 
-			    operation_timeout[denali->flash_bank];
-	int bank = 0;
+	uint32_t irq_mask = INTR_STATUS__RST_COMP |
+			    INTR_STATUS__TIME_OUT;
 
 	clear_interrupts(denali);
 
-	bank = device_reset_banks[denali->flash_bank];
-	denali_write32(bank, denali->flash_reg + DEVICE_RESET);
+	iowrite32(1 << denali->flash_bank, denali->flash_reg + DEVICE_RESET);
 
 	irq_status = wait_for_irq(denali, irq_mask);
-	
-	if (irq_status & operation_timeout[denali->flash_bank])
-	{
-		printk(KERN_ERR "reset bank failed.\n");
-	}
+
+	if (irq_status & INTR_STATUS__TIME_OUT)
+		dev_err(denali->dev, "reset bank failed.\n");
 }
 
 /* Reset the flash controller */
-static uint16_t NAND_Flash_Reset(struct denali_nand_info *denali)
+static uint16_t denali_nand_reset(struct denali_nand_info *denali)
 {
 	uint32_t i;
 
-	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+	dev_dbg(denali->dev, "%s, Line %d, Function: %s\n",
 		       __FILE__, __LINE__, __func__);
 
-	for (i = 0 ; i < LLD_MAX_FLASH_BANKS; i++)
-		denali_write32(reset_complete[i] | operation_timeout[i],
-		denali->flash_reg + intr_status_addresses[i]);
-
-	for (i = 0 ; i < LLD_MAX_FLASH_BANKS; i++) {
-		denali_write32(device_reset_banks[i], denali->flash_reg + DEVICE_RESET);
-		while (!(ioread32(denali->flash_reg + intr_status_addresses[i]) &
-			(reset_complete[i] | operation_timeout[i])))
-			;
-		if (ioread32(denali->flash_reg + intr_status_addresses[i]) &
-			operation_timeout[i])
-			nand_dbg_print(NAND_DBG_WARN,
+	for (i = 0 ; i < denali->max_banks; i++)
+		iowrite32(INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT,
+		denali->flash_reg + INTR_STATUS(i));
+
+	for (i = 0 ; i < denali->max_banks; i++) {
+		iowrite32(1 << i, denali->flash_reg + DEVICE_RESET);
+		while (!(ioread32(denali->flash_reg +
+				INTR_STATUS(i)) &
+			(INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT)))
+			cpu_relax();
+		if (ioread32(denali->flash_reg + INTR_STATUS(i)) &
+			INTR_STATUS__TIME_OUT)
+			dev_dbg(denali->dev,
 			"NAND Reset operation timed out on bank %d\n", i);
 	}
 
-	for (i = 0; i < LLD_MAX_FLASH_BANKS; i++)
-		denali_write32(reset_complete[i] | operation_timeout[i],
-			denali->flash_reg + intr_status_addresses[i]);
+	for (i = 0; i < denali->max_banks; i++)
+		iowrite32(INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT,
+			denali->flash_reg + INTR_STATUS(i));
 
 	return PASS;
 }
 
-/* this routine calculates the ONFI timing values for a given mode and programs
- * the clocking register accordingly. The mode is determined by the get_onfi_nand_para
-   routine.
+/* this routine calculates the ONFI timing values for a given mode and
+ * programs the clocking register accordingly. The mode is determined by
+ * the get_onfi_nand_para routine.
  */
-static void NAND_ONFi_Timing_Mode(struct denali_nand_info *denali, uint16_t mode)
+static void nand_onfi_timing_set(struct denali_nand_info *denali,
+								uint16_t mode)
 {
 	uint16_t Trea[6] = {40, 30, 25, 20, 20, 16};
 	uint16_t Trp[6] = {50, 25, 17, 15, 12, 10};
@@ -272,7 +218,7 @@ static void NAND_ONFi_Timing_Mode(struct denali_nand_info *denali, uint16_t mode
 	uint16_t acc_clks;
 	uint16_t addr_2_data, re_2_we, re_2_re, we_2_re, cs_cnt;
 
-	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+	dev_dbg(denali->dev, "%s, Line %d, Function: %s\n",
 		       __FILE__, __LINE__, __func__);
 
 	en_lo = CEIL_DIV(Trp[mode], CLK_X);
@@ -309,7 +255,7 @@ static void NAND_ONFi_Timing_Mode(struct denali_nand_info *denali, uint16_t mode
 		acc_clks++;
 
 	if ((data_invalid - acc_clks * CLK_X) < 2)
-		nand_dbg_print(NAND_DBG_WARN, "%s, Line %d: Warning!\n",
+		dev_warn(denali->dev, "%s, Line %d: Warning!\n",
 			__FILE__, __LINE__);
 
 	addr_2_data = CEIL_DIV(Tadl[mode], CLK_X);
@@ -337,146 +283,34 @@ static void NAND_ONFi_Timing_Mode(struct denali_nand_info *denali, uint16_t mode
 		(ioread32(denali->flash_reg + DEVICE_ID) == 0x88))
 		acc_clks = 6;
 
-	denali_write32(acc_clks, denali->flash_reg + ACC_CLKS);
-	denali_write32(re_2_we, denali->flash_reg + RE_2_WE);
-	denali_write32(re_2_re, denali->flash_reg + RE_2_RE);
-	denali_write32(we_2_re, denali->flash_reg + WE_2_RE);
-	denali_write32(addr_2_data, denali->flash_reg + ADDR_2_DATA);
-	denali_write32(en_lo, denali->flash_reg + RDWR_EN_LO_CNT);
-	denali_write32(en_hi, denali->flash_reg + RDWR_EN_HI_CNT);
-	denali_write32(cs_cnt, denali->flash_reg + CS_SETUP_CNT);
-}
-
-/* configures the initial ECC settings for the controller */
-static void set_ecc_config(struct denali_nand_info *denali)
-{
-#if SUPPORT_8BITECC
-	if ((ioread32(denali->flash_reg + DEVICE_MAIN_AREA_SIZE) < 4096) ||
-		(ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE) <= 128))
-		denali_write32(8, denali->flash_reg + ECC_CORRECTION);
-#endif
-
-	if ((ioread32(denali->flash_reg + ECC_CORRECTION) & ECC_CORRECTION__VALUE)
-		== 1) {
-		denali->dev_info.wECCBytesPerSector = 4;
-		denali->dev_info.wECCBytesPerSector *= denali->dev_info.wDevicesConnected;
-		denali->dev_info.wNumPageSpareFlag =
-			denali->dev_info.wPageSpareSize -
-			denali->dev_info.wPageDataSize /
-			(ECC_SECTOR_SIZE * denali->dev_info.wDevicesConnected) *
-			denali->dev_info.wECCBytesPerSector
-			- denali->dev_info.wSpareSkipBytes;
-	} else {
-		denali->dev_info.wECCBytesPerSector =
-			(ioread32(denali->flash_reg + ECC_CORRECTION) &
-			ECC_CORRECTION__VALUE) * 13 / 8;
-		if ((denali->dev_info.wECCBytesPerSector) % 2 == 0)
-			denali->dev_info.wECCBytesPerSector += 2;
-		else
-			denali->dev_info.wECCBytesPerSector += 1;
-
-		denali->dev_info.wECCBytesPerSector *= denali->dev_info.wDevicesConnected;
-		denali->dev_info.wNumPageSpareFlag = denali->dev_info.wPageSpareSize -
-			denali->dev_info.wPageDataSize /
-			(ECC_SECTOR_SIZE * denali->dev_info.wDevicesConnected) *
-			denali->dev_info.wECCBytesPerSector
-			- denali->dev_info.wSpareSkipBytes;
-	}
+	iowrite32(acc_clks, denali->flash_reg + ACC_CLKS);
+	iowrite32(re_2_we, denali->flash_reg + RE_2_WE);
+	iowrite32(re_2_re, denali->flash_reg + RE_2_RE);
+	iowrite32(we_2_re, denali->flash_reg + WE_2_RE);
+	iowrite32(addr_2_data, denali->flash_reg + ADDR_2_DATA);
+	iowrite32(en_lo, denali->flash_reg + RDWR_EN_LO_CNT);
+	iowrite32(en_hi, denali->flash_reg + RDWR_EN_HI_CNT);
+	iowrite32(cs_cnt, denali->flash_reg + CS_SETUP_CNT);
 }
 
 /* queries the NAND device to see what ONFI modes it supports. */
 static uint16_t get_onfi_nand_para(struct denali_nand_info *denali)
 {
 	int i;
-	uint16_t blks_lun_l, blks_lun_h, n_of_luns;
-	uint32_t blockperlun, id;
-
-	denali_write32(DEVICE_RESET__BANK0, denali->flash_reg + DEVICE_RESET);
-
-	while (!((ioread32(denali->flash_reg + INTR_STATUS0) &
-		INTR_STATUS0__RST_COMP) |
-		(ioread32(denali->flash_reg + INTR_STATUS0) &
-		INTR_STATUS0__TIME_OUT)))
-		;
-
-	if (ioread32(denali->flash_reg + INTR_STATUS0) & INTR_STATUS0__RST_COMP) {
-		denali_write32(DEVICE_RESET__BANK1, denali->flash_reg + DEVICE_RESET);
-		while (!((ioread32(denali->flash_reg + INTR_STATUS1) &
-			INTR_STATUS1__RST_COMP) |
-			(ioread32(denali->flash_reg + INTR_STATUS1) &
-			INTR_STATUS1__TIME_OUT)))
-			;
-
-		if (ioread32(denali->flash_reg + INTR_STATUS1) &
-			INTR_STATUS1__RST_COMP) {
-			denali_write32(DEVICE_RESET__BANK2,
-				denali->flash_reg + DEVICE_RESET);
-			while (!((ioread32(denali->flash_reg + INTR_STATUS2) &
-				INTR_STATUS2__RST_COMP) |
-				(ioread32(denali->flash_reg + INTR_STATUS2) &
-				INTR_STATUS2__TIME_OUT)))
-				;
-
-			if (ioread32(denali->flash_reg + INTR_STATUS2) &
-				INTR_STATUS2__RST_COMP) {
-				denali_write32(DEVICE_RESET__BANK3,
-					denali->flash_reg + DEVICE_RESET);
-				while (!((ioread32(denali->flash_reg + INTR_STATUS3) &
-					INTR_STATUS3__RST_COMP) |
-					(ioread32(denali->flash_reg + INTR_STATUS3) &
-					INTR_STATUS3__TIME_OUT)))
-					;
-			} else {
-				printk(KERN_ERR "Getting a time out for bank 2!\n");
-			}
-		} else {
-			printk(KERN_ERR "Getting a time out for bank 1!\n");
-		}
-	}
-
-	denali_write32(INTR_STATUS0__TIME_OUT, denali->flash_reg + INTR_STATUS0);
-	denali_write32(INTR_STATUS1__TIME_OUT, denali->flash_reg + INTR_STATUS1);
-	denali_write32(INTR_STATUS2__TIME_OUT, denali->flash_reg + INTR_STATUS2);
-	denali_write32(INTR_STATUS3__TIME_OUT, denali->flash_reg + INTR_STATUS3);
-
-	denali->dev_info.wONFIDevFeatures =
-		ioread32(denali->flash_reg + ONFI_DEVICE_FEATURES);
-	denali->dev_info.wONFIOptCommands =
-		ioread32(denali->flash_reg + ONFI_OPTIONAL_COMMANDS);
-	denali->dev_info.wONFITimingMode =
-		ioread32(denali->flash_reg + ONFI_TIMING_MODE);
-	denali->dev_info.wONFIPgmCacheTimingMode =
-		ioread32(denali->flash_reg + ONFI_PGM_CACHE_TIMING_MODE);
-
-	n_of_luns = ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_LUNS) &
-		ONFI_DEVICE_NO_OF_LUNS__NO_OF_LUNS;
-	blks_lun_l = ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L);
-	blks_lun_h = ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U);
-
-	blockperlun = (blks_lun_h << 16) | blks_lun_l;
-
-	denali->dev_info.wTotalBlocks = n_of_luns * blockperlun;
-
+	/* we needn't to do a reset here because driver has already
+	 * reset all the banks before
+	 * */
 	if (!(ioread32(denali->flash_reg + ONFI_TIMING_MODE) &
 		ONFI_TIMING_MODE__VALUE))
 		return FAIL;
 
 	for (i = 5; i > 0; i--) {
-		if (ioread32(denali->flash_reg + ONFI_TIMING_MODE) & (0x01 << i))
+		if (ioread32(denali->flash_reg + ONFI_TIMING_MODE) &
+			(0x01 << i))
 			break;
 	}
 
-	NAND_ONFi_Timing_Mode(denali, i);
-
-	index_addr(denali, MODE_11 | 0, 0x90);
-	index_addr(denali, MODE_11 | 1, 0);
-
-	for (i = 0; i < 3; i++)
-		index_addr_read_data(denali, MODE_11 | 2, &id);
-
-	nand_dbg_print(NAND_DBG_DEBUG, "3rd ID: 0x%x\n", id);
-
-	denali->dev_info.MLCDevice = id & 0x0C;
+	nand_onfi_timing_set(denali, i);
 
 	/* By now, all the ONFI devices we know support the page cache */
 	/* rw feature. So here we enable the pipeline_rw_ahead feature */
@@ -486,144 +320,92 @@ static uint16_t get_onfi_nand_para(struct denali_nand_info *denali)
 	return PASS;
 }
 
-static void get_samsung_nand_para(struct denali_nand_info *denali)
+static void get_samsung_nand_para(struct denali_nand_info *denali,
+							uint8_t device_id)
 {
-	uint8_t no_of_planes;
-	uint32_t blk_size;
-	uint64_t plane_size, capacity;
-	uint32_t id_bytes[5];
-	int i;
-
-	index_addr(denali, (uint32_t)(MODE_11 | 0), 0x90);
-	index_addr(denali, (uint32_t)(MODE_11 | 1), 0);
-	for (i = 0; i < 5; i++)
-		index_addr_read_data(denali, (uint32_t)(MODE_11 | 2), &id_bytes[i]);
-
-	nand_dbg_print(NAND_DBG_DEBUG,
-		"ID bytes: 0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n",
-		id_bytes[0], id_bytes[1], id_bytes[2],
-		id_bytes[3], id_bytes[4]);
-
-	if ((id_bytes[1] & 0xff) == 0xd3) { /* Samsung K9WAG08U1A */
+	if (device_id == 0xd3) { /* Samsung K9WAG08U1A */
 		/* Set timing register values according to datasheet */
-		denali_write32(5, denali->flash_reg + ACC_CLKS);
-		denali_write32(20, denali->flash_reg + RE_2_WE);
-		denali_write32(12, denali->flash_reg + WE_2_RE);
-		denali_write32(14, denali->flash_reg + ADDR_2_DATA);
-		denali_write32(3, denali->flash_reg + RDWR_EN_LO_CNT);
-		denali_write32(2, denali->flash_reg + RDWR_EN_HI_CNT);
-		denali_write32(2, denali->flash_reg + CS_SETUP_CNT);
+		iowrite32(5, denali->flash_reg + ACC_CLKS);
+		iowrite32(20, denali->flash_reg + RE_2_WE);
+		iowrite32(12, denali->flash_reg + WE_2_RE);
+		iowrite32(14, denali->flash_reg + ADDR_2_DATA);
+		iowrite32(3, denali->flash_reg + RDWR_EN_LO_CNT);
+		iowrite32(2, denali->flash_reg + RDWR_EN_HI_CNT);
+		iowrite32(2, denali->flash_reg + CS_SETUP_CNT);
 	}
-
-	no_of_planes = 1 << ((id_bytes[4] & 0x0c) >> 2);
-	plane_size  = (uint64_t)64 << ((id_bytes[4] & 0x70) >> 4);
-	blk_size = 64 << ((ioread32(denali->flash_reg + DEVICE_PARAM_1) & 0x30) >> 4);
-	capacity = (uint64_t)128 * plane_size * no_of_planes;
-
-	do_div(capacity, blk_size);
-	denali->dev_info.wTotalBlocks = capacity;
 }
 
 static void get_toshiba_nand_para(struct denali_nand_info *denali)
 {
-	void __iomem *scratch_reg;
 	uint32_t tmp;
 
 	/* Workaround to fix a controller bug which reports a wrong */
 	/* spare area size for some kind of Toshiba NAND device */
 	if ((ioread32(denali->flash_reg + DEVICE_MAIN_AREA_SIZE) == 4096) &&
 		(ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE) == 64)) {
-		denali_write32(216, denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
+		iowrite32(216, denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
 		tmp = ioread32(denali->flash_reg + DEVICES_CONNECTED) *
 			ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
-		denali_write32(tmp, denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE);
+		iowrite32(tmp,
+				denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE);
 #if SUPPORT_15BITECC
-		denali_write32(15, denali->flash_reg + ECC_CORRECTION);
+		iowrite32(15, denali->flash_reg + ECC_CORRECTION);
 #elif SUPPORT_8BITECC
-		denali_write32(8, denali->flash_reg + ECC_CORRECTION);
+		iowrite32(8, denali->flash_reg + ECC_CORRECTION);
 #endif
 	}
-
-	/* As Toshiba NAND can not provide it's block number, */
-	/* so here we need user to provide the correct block */
-	/* number in a scratch register before the Linux NAND */
-	/* driver is loaded. If no valid value found in the scratch */
-	/* register, then we use default block number value */
-	scratch_reg = ioremap_nocache(SCRATCH_REG_ADDR, SCRATCH_REG_SIZE);
-	if (!scratch_reg) {
-		printk(KERN_ERR "Spectra: ioremap failed in %s, Line %d",
-			__FILE__, __LINE__);
-		denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
-	} else {
-		nand_dbg_print(NAND_DBG_WARN,
-			"Spectra: ioremap reg address: 0x%p\n", scratch_reg);
-		denali->dev_info.wTotalBlocks = 1 << ioread8(scratch_reg);
-		if (denali->dev_info.wTotalBlocks < 512)
-			denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
-		iounmap(scratch_reg);
-	}
 }
 
-static void get_hynix_nand_para(struct denali_nand_info *denali)
+static void get_hynix_nand_para(struct denali_nand_info *denali,
+							uint8_t device_id)
 {
-	void __iomem *scratch_reg;
 	uint32_t main_size, spare_size;
 
-	switch (denali->dev_info.wDeviceID) {
+	switch (device_id) {
 	case 0xD5: /* Hynix H27UAG8T2A, H27UBG8U5A or H27UCG8VFA */
 	case 0xD7: /* Hynix H27UDG8VEM, H27UCG8UDM or H27UCG8V5A */
-		denali_write32(128, denali->flash_reg + PAGES_PER_BLOCK);
-		denali_write32(4096, denali->flash_reg + DEVICE_MAIN_AREA_SIZE);
-		denali_write32(224, denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
-		main_size = 4096 * ioread32(denali->flash_reg + DEVICES_CONNECTED);
-		spare_size = 224 * ioread32(denali->flash_reg + DEVICES_CONNECTED);
-		denali_write32(main_size, denali->flash_reg + LOGICAL_PAGE_DATA_SIZE);
-		denali_write32(spare_size, denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE);
-		denali_write32(0, denali->flash_reg + DEVICE_WIDTH);
+		iowrite32(128, denali->flash_reg + PAGES_PER_BLOCK);
+		iowrite32(4096, denali->flash_reg + DEVICE_MAIN_AREA_SIZE);
+		iowrite32(224, denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
+		main_size = 4096 *
+			ioread32(denali->flash_reg + DEVICES_CONNECTED);
+		spare_size = 224 *
+			ioread32(denali->flash_reg + DEVICES_CONNECTED);
+		iowrite32(main_size,
+				denali->flash_reg + LOGICAL_PAGE_DATA_SIZE);
+		iowrite32(spare_size,
+				denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE);
+		iowrite32(0, denali->flash_reg + DEVICE_WIDTH);
 #if SUPPORT_15BITECC
-		denali_write32(15, denali->flash_reg + ECC_CORRECTION);
+		iowrite32(15, denali->flash_reg + ECC_CORRECTION);
 #elif SUPPORT_8BITECC
-		denali_write32(8, denali->flash_reg + ECC_CORRECTION);
+		iowrite32(8, denali->flash_reg + ECC_CORRECTION);
 #endif
-		denali->dev_info.MLCDevice  = 1;
 		break;
 	default:
-		nand_dbg_print(NAND_DBG_WARN,
+		dev_warn(denali->dev,
 			"Spectra: Unknown Hynix NAND (Device ID: 0x%x)."
 			"Will use default parameter values instead.\n",
-			denali->dev_info.wDeviceID);
-	}
-
-	scratch_reg = ioremap_nocache(SCRATCH_REG_ADDR, SCRATCH_REG_SIZE);
-	if (!scratch_reg) {
-		printk(KERN_ERR "Spectra: ioremap failed in %s, Line %d",
-			__FILE__, __LINE__);
-		denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
-	} else {
-		nand_dbg_print(NAND_DBG_WARN,
-			"Spectra: ioremap reg address: 0x%p\n", scratch_reg);
-		denali->dev_info.wTotalBlocks = 1 << ioread8(scratch_reg);
-		if (denali->dev_info.wTotalBlocks < 512)
-			denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
-		iounmap(scratch_reg);
+			device_id);
 	}
 }
 
 /* determines how many NAND chips are connected to the controller. Note for
-   Intel CE4100 devices we don't support more than one device. 
+ * Intel CE4100 devices we don't support more than one device.
  */
 static void find_valid_banks(struct denali_nand_info *denali)
 {
-	uint32_t id[LLD_MAX_FLASH_BANKS];
+	uint32_t id[denali->max_banks];
 	int i;
 
 	denali->total_used_banks = 1;
-	for (i = 0; i < LLD_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < denali->max_banks; i++) {
 		index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 0), 0x90);
 		index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 1), 0);
-		index_addr_read_data(denali, (uint32_t)(MODE_11 | (i << 24) | 2), &id[i]);
+		index_addr_read_data(denali,
+				(uint32_t)(MODE_11 | (i << 24) | 2), &id[i]);
 
-		nand_dbg_print(NAND_DBG_DEBUG,
+		dev_dbg(denali->dev,
 			"Return 1st ID for bank[%d]: %x\n", i, id[i]);
 
 		if (i == 0) {
@@ -637,332 +419,188 @@ static void find_valid_banks(struct denali_nand_info *denali)
 		}
 	}
 
-	if (denali->platform == INTEL_CE4100)
-	{
+	if (denali->platform == INTEL_CE4100) {
 		/* Platform limitations of the CE4100 device limit
 		 * users to a single chip solution for NAND.
-                 * Multichip support is not enabled. 
-		 */ 
-		if (denali->total_used_banks != 1)
-		{
-			printk(KERN_ERR "Sorry, Intel CE4100 only supports "
+		 * Multichip support is not enabled.
+		 */
+		if (denali->total_used_banks != 1) {
+			dev_err(denali->dev,
+					"Sorry, Intel CE4100 only supports "
 					"a single NAND device.\n");
 			BUG();
 		}
 	}
-	nand_dbg_print(NAND_DBG_DEBUG,
+	dev_dbg(denali->dev,
 		"denali->total_used_banks: %d\n", denali->total_used_banks);
 }
 
-static void detect_partition_feature(struct denali_nand_info *denali)
+/*
+ * Use the configuration feature register to determine the maximum number of
+ * banks that the hardware supports.
+ */
+static void detect_max_banks(struct denali_nand_info *denali)
 {
-	if (ioread32(denali->flash_reg + FEATURES) & FEATURES__PARTITION) {
-		if ((ioread32(denali->flash_reg + PERM_SRC_ID_1) &
-			PERM_SRC_ID_1__SRCID) == SPECTRA_PARTITION_ID) {
-			denali->dev_info.wSpectraStartBlock =
-			    ((ioread32(denali->flash_reg + MIN_MAX_BANK_1) &
-			      MIN_MAX_BANK_1__MIN_VALUE) *
-			     denali->dev_info.wTotalBlocks)
-			    +
-			    (ioread32(denali->flash_reg + MIN_BLK_ADDR_1) &
-			    MIN_BLK_ADDR_1__VALUE);
-
-			denali->dev_info.wSpectraEndBlock =
-			    (((ioread32(denali->flash_reg + MIN_MAX_BANK_1) &
-			       MIN_MAX_BANK_1__MAX_VALUE) >> 2) *
-			     denali->dev_info.wTotalBlocks)
-			    +
-			    (ioread32(denali->flash_reg + MAX_BLK_ADDR_1) &
-			    MAX_BLK_ADDR_1__VALUE);
-
-			denali->dev_info.wTotalBlocks *= denali->total_used_banks;
-
-			if (denali->dev_info.wSpectraEndBlock >=
-			    denali->dev_info.wTotalBlocks) {
-				denali->dev_info.wSpectraEndBlock =
-				    denali->dev_info.wTotalBlocks - 1;
-			}
+	uint32_t features = ioread32(denali->flash_reg + FEATURES);
 
-			denali->dev_info.wDataBlockNum =
-				denali->dev_info.wSpectraEndBlock -
-				denali->dev_info.wSpectraStartBlock + 1;
-		} else {
-			denali->dev_info.wTotalBlocks *= denali->total_used_banks;
-			denali->dev_info.wSpectraStartBlock = SPECTRA_START_BLOCK;
-			denali->dev_info.wSpectraEndBlock =
-				denali->dev_info.wTotalBlocks - 1;
-			denali->dev_info.wDataBlockNum =
-				denali->dev_info.wSpectraEndBlock -
-				denali->dev_info.wSpectraStartBlock + 1;
-		}
-	} else {
-		denali->dev_info.wTotalBlocks *= denali->total_used_banks;
-		denali->dev_info.wSpectraStartBlock = SPECTRA_START_BLOCK;
-		denali->dev_info.wSpectraEndBlock = denali->dev_info.wTotalBlocks - 1;
-		denali->dev_info.wDataBlockNum =
-			denali->dev_info.wSpectraEndBlock -
-			denali->dev_info.wSpectraStartBlock + 1;
-	}
+	denali->max_banks = 2 << (features & FEATURES__N_BANKS);
 }
 
-static void dump_device_info(struct denali_nand_info *denali)
+static void detect_partition_feature(struct denali_nand_info *denali)
 {
-	nand_dbg_print(NAND_DBG_DEBUG, "denali->dev_info:\n");
-	nand_dbg_print(NAND_DBG_DEBUG, "DeviceMaker: 0x%x\n",
-		denali->dev_info.wDeviceMaker);
-	nand_dbg_print(NAND_DBG_DEBUG, "DeviceID: 0x%x\n",
-		denali->dev_info.wDeviceID);
-	nand_dbg_print(NAND_DBG_DEBUG, "DeviceType: 0x%x\n",
-		denali->dev_info.wDeviceType);
-	nand_dbg_print(NAND_DBG_DEBUG, "SpectraStartBlock: %d\n",
-		denali->dev_info.wSpectraStartBlock);
-	nand_dbg_print(NAND_DBG_DEBUG, "SpectraEndBlock: %d\n",
-		denali->dev_info.wSpectraEndBlock);
-	nand_dbg_print(NAND_DBG_DEBUG, "TotalBlocks: %d\n",
-		denali->dev_info.wTotalBlocks);
-	nand_dbg_print(NAND_DBG_DEBUG, "PagesPerBlock: %d\n",
-		denali->dev_info.wPagesPerBlock);
-	nand_dbg_print(NAND_DBG_DEBUG, "PageSize: %d\n",
-		denali->dev_info.wPageSize);
-	nand_dbg_print(NAND_DBG_DEBUG, "PageDataSize: %d\n",
-		denali->dev_info.wPageDataSize);
-	nand_dbg_print(NAND_DBG_DEBUG, "PageSpareSize: %d\n",
-		denali->dev_info.wPageSpareSize);
-	nand_dbg_print(NAND_DBG_DEBUG, "NumPageSpareFlag: %d\n",
-		denali->dev_info.wNumPageSpareFlag);
-	nand_dbg_print(NAND_DBG_DEBUG, "ECCBytesPerSector: %d\n",
-		denali->dev_info.wECCBytesPerSector);
-	nand_dbg_print(NAND_DBG_DEBUG, "BlockSize: %d\n",
-		denali->dev_info.wBlockSize);
-	nand_dbg_print(NAND_DBG_DEBUG, "BlockDataSize: %d\n",
-		denali->dev_info.wBlockDataSize);
-	nand_dbg_print(NAND_DBG_DEBUG, "DataBlockNum: %d\n",
-		denali->dev_info.wDataBlockNum);
-	nand_dbg_print(NAND_DBG_DEBUG, "PlaneNum: %d\n",
-		denali->dev_info.bPlaneNum);
-	nand_dbg_print(NAND_DBG_DEBUG, "DeviceMainAreaSize: %d\n",
-		denali->dev_info.wDeviceMainAreaSize);
-	nand_dbg_print(NAND_DBG_DEBUG, "DeviceSpareAreaSize: %d\n",
-		denali->dev_info.wDeviceSpareAreaSize);
-	nand_dbg_print(NAND_DBG_DEBUG, "DevicesConnected: %d\n",
-		denali->dev_info.wDevicesConnected);
-	nand_dbg_print(NAND_DBG_DEBUG, "DeviceWidth: %d\n",
-		denali->dev_info.wDeviceWidth);
-	nand_dbg_print(NAND_DBG_DEBUG, "HWRevision: 0x%x\n",
-		denali->dev_info.wHWRevision);
-	nand_dbg_print(NAND_DBG_DEBUG, "HWFeatures: 0x%x\n",
-		denali->dev_info.wHWFeatures);
-	nand_dbg_print(NAND_DBG_DEBUG, "ONFIDevFeatures: 0x%x\n",
-		denali->dev_info.wONFIDevFeatures);
-	nand_dbg_print(NAND_DBG_DEBUG, "ONFIOptCommands: 0x%x\n",
-		denali->dev_info.wONFIOptCommands);
-	nand_dbg_print(NAND_DBG_DEBUG, "ONFITimingMode: 0x%x\n",
-		denali->dev_info.wONFITimingMode);
-	nand_dbg_print(NAND_DBG_DEBUG, "ONFIPgmCacheTimingMode: 0x%x\n",
-		denali->dev_info.wONFIPgmCacheTimingMode);
-	nand_dbg_print(NAND_DBG_DEBUG, "MLCDevice: %s\n",
-		denali->dev_info.MLCDevice ? "Yes" : "No");
-	nand_dbg_print(NAND_DBG_DEBUG, "SpareSkipBytes: %d\n",
-		denali->dev_info.wSpareSkipBytes);
-	nand_dbg_print(NAND_DBG_DEBUG, "BitsInPageNumber: %d\n",
-		denali->dev_info.nBitsInPageNumber);
-	nand_dbg_print(NAND_DBG_DEBUG, "BitsInPageDataSize: %d\n",
-		denali->dev_info.nBitsInPageDataSize);
-	nand_dbg_print(NAND_DBG_DEBUG, "BitsInBlockDataSize: %d\n",
-		denali->dev_info.nBitsInBlockDataSize);
+	/* For MRST platform, denali->fwblks represent the
+	 * number of blocks firmware is taken,
+	 * FW is in protect partition and MTD driver has no
+	 * permission to access it. So let driver know how many
+	 * blocks it can't touch.
+	 * */
+	if (ioread32(denali->flash_reg + FEATURES) & FEATURES__PARTITION) {
+		if ((ioread32(denali->flash_reg + PERM_SRC_ID(1)) &
+			PERM_SRC_ID__SRCID) == SPECTRA_PARTITION_ID) {
+			denali->fwblks =
+			    ((ioread32(denali->flash_reg + MIN_MAX_BANK(1)) &
+			      MIN_MAX_BANK__MIN_VALUE) *
+			     denali->blksperchip)
+			    +
+			    (ioread32(denali->flash_reg + MIN_BLK_ADDR(1)) &
+			    MIN_BLK_ADDR__VALUE);
+		} else
+			denali->fwblks = SPECTRA_START_BLOCK;
+	} else
+		denali->fwblks = SPECTRA_START_BLOCK;
 }
 
-static uint16_t NAND_Read_Device_ID(struct denali_nand_info *denali)
+static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
 {
 	uint16_t status = PASS;
-	uint8_t no_of_planes;
-
-	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
-		       __FILE__, __LINE__, __func__);
-
-	denali->dev_info.wDeviceMaker = ioread32(denali->flash_reg + MANUFACTURER_ID);
-	denali->dev_info.wDeviceID = ioread32(denali->flash_reg + DEVICE_ID);
-	denali->dev_info.bDeviceParam0 = ioread32(denali->flash_reg + DEVICE_PARAM_0);
-	denali->dev_info.bDeviceParam1 = ioread32(denali->flash_reg + DEVICE_PARAM_1);
-	denali->dev_info.bDeviceParam2 = ioread32(denali->flash_reg + DEVICE_PARAM_2);
-
-	denali->dev_info.MLCDevice = ioread32(denali->flash_reg + DEVICE_PARAM_0) & 0x0c;
+	uint32_t id_bytes[5], addr;
+	uint8_t i, maf_id, device_id;
+
+	dev_dbg(denali->dev,
+			"%s, Line %d, Function: %s\n",
+			__FILE__, __LINE__, __func__);
+
+	/* Use read id method to get device ID and other
+	 * params. For some NAND chips, controller can't
+	 * report the correct device ID by reading from
+	 * DEVICE_ID register
+	 * */
+	addr = (uint32_t)MODE_11 | BANK(denali->flash_bank);
+	index_addr(denali, (uint32_t)addr | 0, 0x90);
+	index_addr(denali, (uint32_t)addr | 1, 0);
+	for (i = 0; i < 5; i++)
+		index_addr_read_data(denali, addr | 2, &id_bytes[i]);
+	maf_id = id_bytes[0];
+	device_id = id_bytes[1];
 
 	if (ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_LUNS) &
 		ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE) { /* ONFI 1.0 NAND */
 		if (FAIL == get_onfi_nand_para(denali))
 			return FAIL;
-	} else if (denali->dev_info.wDeviceMaker == 0xEC) { /* Samsung NAND */
-		get_samsung_nand_para(denali);
-	} else if (denali->dev_info.wDeviceMaker == 0x98) { /* Toshiba NAND */
+	} else if (maf_id == 0xEC) { /* Samsung NAND */
+		get_samsung_nand_para(denali, device_id);
+	} else if (maf_id == 0x98) { /* Toshiba NAND */
 		get_toshiba_nand_para(denali);
-	} else if (denali->dev_info.wDeviceMaker == 0xAD) { /* Hynix NAND */
-		get_hynix_nand_para(denali);
-	} else {
-		denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
+	} else if (maf_id == 0xAD) { /* Hynix NAND */
+		get_hynix_nand_para(denali, device_id);
 	}
 
-	nand_dbg_print(NAND_DBG_DEBUG, "Dump timing register values:"
-			"acc_clks: %d, re_2_we: %d, we_2_re: %d,"
-			"addr_2_data: %d, rdwr_en_lo_cnt: %d, "
+	dev_info(denali->dev,
+			"Dump timing register values:"
+			"acc_clks: %d, re_2_we: %d, re_2_re: %d\n"
+			"we_2_re: %d, addr_2_data: %d, rdwr_en_lo_cnt: %d\n"
 			"rdwr_en_hi_cnt: %d, cs_setup_cnt: %d\n",
 			ioread32(denali->flash_reg + ACC_CLKS),
 			ioread32(denali->flash_reg + RE_2_WE),
+			ioread32(denali->flash_reg + RE_2_RE),
 			ioread32(denali->flash_reg + WE_2_RE),
 			ioread32(denali->flash_reg + ADDR_2_DATA),
 			ioread32(denali->flash_reg + RDWR_EN_LO_CNT),
 			ioread32(denali->flash_reg + RDWR_EN_HI_CNT),
 			ioread32(denali->flash_reg + CS_SETUP_CNT));
 
-	denali->dev_info.wHWRevision = ioread32(denali->flash_reg + REVISION);
-	denali->dev_info.wHWFeatures = ioread32(denali->flash_reg + FEATURES);
-
-	denali->dev_info.wDeviceMainAreaSize =
-		ioread32(denali->flash_reg + DEVICE_MAIN_AREA_SIZE);
-	denali->dev_info.wDeviceSpareAreaSize =
-		ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
-
-	denali->dev_info.wPageDataSize =
-		ioread32(denali->flash_reg + LOGICAL_PAGE_DATA_SIZE);
-
-	/* Note: When using the Micon 4K NAND device, the controller will report
-	 * Page Spare Size as 216 bytes. But Micron's Spec say it's 218 bytes.
-	 * And if force set it to 218 bytes, the controller can not work
-	 * correctly. So just let it be. But keep in mind that this bug may
-	 * cause
-	 * other problems in future.       - Yunpeng  2008-10-10
-	 */
-	denali->dev_info.wPageSpareSize =
-		ioread32(denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE);
-
-	denali->dev_info.wPagesPerBlock = ioread32(denali->flash_reg + PAGES_PER_BLOCK);
-
-	denali->dev_info.wPageSize =
-	    denali->dev_info.wPageDataSize + denali->dev_info.wPageSpareSize;
-	denali->dev_info.wBlockSize =
-	    denali->dev_info.wPageSize * denali->dev_info.wPagesPerBlock;
-	denali->dev_info.wBlockDataSize =
-	    denali->dev_info.wPagesPerBlock * denali->dev_info.wPageDataSize;
-
-	denali->dev_info.wDeviceWidth = ioread32(denali->flash_reg + DEVICE_WIDTH);
-	denali->dev_info.wDeviceType =
-		((ioread32(denali->flash_reg + DEVICE_WIDTH) > 0) ? 16 : 8);
-
-	denali->dev_info.wDevicesConnected = ioread32(denali->flash_reg + DEVICES_CONNECTED);
-
-	denali->dev_info.wSpareSkipBytes =
-		ioread32(denali->flash_reg + SPARE_AREA_SKIP_BYTES) *
-		denali->dev_info.wDevicesConnected;
-
-	denali->dev_info.nBitsInPageNumber =
-		ilog2(denali->dev_info.wPagesPerBlock);
-	denali->dev_info.nBitsInPageDataSize =
-		ilog2(denali->dev_info.wPageDataSize);
-	denali->dev_info.nBitsInBlockDataSize =
-		ilog2(denali->dev_info.wBlockDataSize);
-
-	set_ecc_config(denali);
-
-	no_of_planes = ioread32(denali->flash_reg + NUMBER_OF_PLANES) &
-		NUMBER_OF_PLANES__VALUE;
-
-	switch (no_of_planes) {
-	case 0:
-	case 1:
-	case 3:
-	case 7:
-		denali->dev_info.bPlaneNum = no_of_planes + 1;
-		break;
-	default:
-		status = FAIL;
-		break;
-	}
-
 	find_valid_banks(denali);
 
 	detect_partition_feature(denali);
 
-	dump_device_info(denali);
-
 	/* If the user specified to override the default timings
-	 * with a specific ONFI mode, we apply those changes here. 
+	 * with a specific ONFI mode, we apply those changes here.
 	 */
 	if (onfi_timing_mode != NAND_DEFAULT_TIMINGS)
-	{
-		NAND_ONFi_Timing_Mode(denali, onfi_timing_mode);
-	}
+		nand_onfi_timing_set(denali, onfi_timing_mode);
 
 	return status;
 }
 
-static void NAND_LLD_Enable_Disable_Interrupts(struct denali_nand_info *denali,
+static void denali_set_intr_modes(struct denali_nand_info *denali,
 					uint16_t INT_ENABLE)
 {
-	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+	dev_dbg(denali->dev, "%s, Line %d, Function: %s\n",
 		       __FILE__, __LINE__, __func__);
 
 	if (INT_ENABLE)
-		denali_write32(1, denali->flash_reg + GLOBAL_INT_ENABLE);
+		iowrite32(1, denali->flash_reg + GLOBAL_INT_ENABLE);
 	else
-		denali_write32(0, denali->flash_reg + GLOBAL_INT_ENABLE);
+		iowrite32(0, denali->flash_reg + GLOBAL_INT_ENABLE);
 }
 
 /* validation function to verify that the controlling software is making
-   a valid request
+ * a valid request
  */
 static inline bool is_flash_bank_valid(int flash_bank)
 {
-	return (flash_bank >= 0 && flash_bank < 4); 
+	return (flash_bank >= 0 && flash_bank < 4);
 }
 
 static void denali_irq_init(struct denali_nand_info *denali)
 {
 	uint32_t int_mask = 0;
+	int i;
 
 	/* Disable global interrupts */
-	NAND_LLD_Enable_Disable_Interrupts(denali, false);
+	denali_set_intr_modes(denali, false);
 
 	int_mask = DENALI_IRQ_ALL;
 
 	/* Clear all status bits */
-	denali_write32(0xFFFF, denali->flash_reg + INTR_STATUS0);
-	denali_write32(0xFFFF, denali->flash_reg + INTR_STATUS1);
-	denali_write32(0xFFFF, denali->flash_reg + INTR_STATUS2);
-	denali_write32(0xFFFF, denali->flash_reg + INTR_STATUS3);
+	for (i = 0; i < denali->max_banks; ++i)
+		iowrite32(0xFFFF, denali->flash_reg + INTR_STATUS(i));
 
 	denali_irq_enable(denali, int_mask);
 }
 
 static void denali_irq_cleanup(int irqnum, struct denali_nand_info *denali)
 {
-	NAND_LLD_Enable_Disable_Interrupts(denali, false);
+	denali_set_intr_modes(denali, false);
 	free_irq(irqnum, denali);
 }
 
-static void denali_irq_enable(struct denali_nand_info *denali, uint32_t int_mask)
+static void denali_irq_enable(struct denali_nand_info *denali,
+							uint32_t int_mask)
 {
-	denali_write32(int_mask, denali->flash_reg + INTR_EN0);
-	denali_write32(int_mask, denali->flash_reg + INTR_EN1);
-	denali_write32(int_mask, denali->flash_reg + INTR_EN2);
-	denali_write32(int_mask, denali->flash_reg + INTR_EN3);
+	int i;
+
+	for (i = 0; i < denali->max_banks; ++i)
+		iowrite32(int_mask, denali->flash_reg + INTR_EN(i));
 }
 
 /* This function only returns when an interrupt that this driver cares about
- * occurs. This is to reduce the overhead of servicing interrupts 
+ * occurs. This is to reduce the overhead of servicing interrupts
  */
 static inline uint32_t denali_irq_detected(struct denali_nand_info *denali)
 {
-	return (read_interrupt_status(denali) & DENALI_IRQ_ALL);
+	return read_interrupt_status(denali) & DENALI_IRQ_ALL;
 }
 
 /* Interrupts are cleared by writing a 1 to the appropriate status bit */
-static inline void clear_interrupt(struct denali_nand_info *denali, uint32_t irq_mask)
+static inline void clear_interrupt(struct denali_nand_info *denali,
+							uint32_t irq_mask)
 {
 	uint32_t intr_status_reg = 0;
 
-	intr_status_reg = intr_status_addresses[denali->flash_bank];
+	intr_status_reg = INTR_STATUS(denali->flash_bank);
 
-	denali_write32(irq_mask, denali->flash_reg + intr_status_reg);
+	iowrite32(irq_mask, denali->flash_reg + intr_status_reg);
 }
 
 static void clear_interrupts(struct denali_nand_info *denali)
@@ -971,11 +609,7 @@ static void clear_interrupts(struct denali_nand_info *denali)
 	spin_lock_irq(&denali->irq_lock);
 
 	status = read_interrupt_status(denali);
-
-#if DEBUG_DENALI
-	denali->irq_debug_array[denali->idx++] = 0x30000000 | status;
-	denali->idx %= 32;
-#endif
+	clear_interrupt(denali, status);
 
 	denali->irq_status = 0x0;
 	spin_unlock_irq(&denali->irq_lock);
@@ -985,27 +619,14 @@ static uint32_t read_interrupt_status(struct denali_nand_info *denali)
 {
 	uint32_t intr_status_reg = 0;
 
-	intr_status_reg = intr_status_addresses[denali->flash_bank];
+	intr_status_reg = INTR_STATUS(denali->flash_bank);
 
 	return ioread32(denali->flash_reg + intr_status_reg);
 }
 
-#if DEBUG_DENALI
-static void print_irq_log(struct denali_nand_info *denali)
-{
-	int i = 0;
-
-	printk("ISR debug log index = %X\n", denali->idx);
-	for (i = 0; i < 32; i++)
-	{
-		printk("%08X: %08X\n", i, denali->irq_debug_array[i]);
-	}
-}
-#endif
-
-/* This is the interrupt service routine. It handles all interrupts 
- * sent to this device. Note that on CE4100, this is a shared 
- * interrupt. 
+/* This is the interrupt service routine. It handles all interrupts
+ * sent to this device. Note that on CE4100, this is a shared
+ * interrupt.
  */
 static irqreturn_t denali_isr(int irq, void *dev_id)
 {
@@ -1015,21 +636,14 @@ static irqreturn_t denali_isr(int irq, void *dev_id)
 
 	spin_lock(&denali->irq_lock);
 
-	/* check to see if a valid NAND chip has 
-         * been selected. 
+	/* check to see if a valid NAND chip has
+	 * been selected.
 	 */
-	if (is_flash_bank_valid(denali->flash_bank))
-	{
-		/* check to see if controller generated 
+	if (is_flash_bank_valid(denali->flash_bank)) {
+		/* check to see if controller generated
 		 * the interrupt, since this is a shared interrupt */
-		if ((irq_status = denali_irq_detected(denali)) != 0)
-		{
-#if DEBUG_DENALI
-			denali->irq_debug_array[denali->idx++] = 0x10000000 | irq_status;
-			denali->idx %= 32;
-
-			printk("IRQ status = 0x%04x\n", irq_status);
-#endif
+		irq_status = denali_irq_detected(denali);
+		if (irq_status != 0) {
 			/* handle interrupt */
 			/* first acknowledge it */
 			clear_interrupt(denali, irq_status);
@@ -1054,149 +668,120 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
 	bool retry = false;
 	unsigned long timeout = msecs_to_jiffies(1000);
 
-	do
-	{
-#if DEBUG_DENALI
-		printk("waiting for 0x%x\n", irq_mask);
-#endif
-		comp_res = wait_for_completion_timeout(&denali->complete, timeout);
+	do {
+		comp_res =
+			wait_for_completion_timeout(&denali->complete, timeout);
 		spin_lock_irq(&denali->irq_lock);
 		intr_status = denali->irq_status;
 
-#if DEBUG_DENALI
-		denali->irq_debug_array[denali->idx++] = 0x20000000 | (irq_mask << 16) | intr_status;
-		denali->idx %= 32;
-#endif
-
-		if (intr_status & irq_mask)
-		{
+		if (intr_status & irq_mask) {
 			denali->irq_status &= ~irq_mask;
 			spin_unlock_irq(&denali->irq_lock);
-#if DEBUG_DENALI
-			if (retry) printk("status on retry = 0x%x\n", intr_status);
-#endif
 			/* our interrupt was detected */
 			break;
-		}
-		else 
-		{
-			/* these are not the interrupts you are looking for - 
-		           need to wait again */
+		} else {
+			/* these are not the interrupts you are looking for -
+			 * need to wait again */
 			spin_unlock_irq(&denali->irq_lock);
-#if DEBUG_DENALI
-			print_irq_log(denali);
-			printk("received irq nobody cared: irq_status = 0x%x,"
-				" irq_mask = 0x%x, timeout = %ld\n", intr_status, irq_mask, comp_res);
-#endif
 			retry = true;
 		}
 	} while (comp_res != 0);
 
-	if (comp_res == 0)
-	{
+	if (comp_res == 0) {
 		/* timeout */
-		printk(KERN_ERR "timeout occurred, status = 0x%x, mask = 0x%x\n", 
-	       			intr_status, irq_mask);
+		pr_err("timeout occurred, status = 0x%x, mask = 0x%x\n",
+				intr_status, irq_mask);
 
 		intr_status = 0;
 	}
 	return intr_status;
 }
 
-/* This helper function setups the registers for ECC and whether or not 
-   the spare area will be transfered. */
-static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en, 
+/* This helper function setups the registers for ECC and whether or not
+ * the spare area will be transferred. */
+static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en,
 				bool transfer_spare)
 {
-	int ecc_en_flag = 0, transfer_spare_flag = 0; 
+	int ecc_en_flag = 0, transfer_spare_flag = 0;
 
 	/* set ECC, transfer spare bits if needed */
 	ecc_en_flag = ecc_en ? ECC_ENABLE__FLAG : 0;
 	transfer_spare_flag = transfer_spare ? TRANSFER_SPARE_REG__FLAG : 0;
 
 	/* Enable spare area/ECC per user's request. */
-	denali_write32(ecc_en_flag, denali->flash_reg + ECC_ENABLE);
-	denali_write32(transfer_spare_flag, denali->flash_reg + TRANSFER_SPARE_REG);
+	iowrite32(ecc_en_flag, denali->flash_reg + ECC_ENABLE);
+	iowrite32(transfer_spare_flag,
+			denali->flash_reg + TRANSFER_SPARE_REG);
 }
 
-/* sends a pipeline command operation to the controller. See the Denali NAND 
-   controller's user guide for more information (section 4.2.3.6). 
+/* sends a pipeline command operation to the controller. See the Denali NAND
+ * controller's user guide for more information (section 4.2.3.6).
  */
-static int denali_send_pipeline_cmd(struct denali_nand_info *denali, bool ecc_en, 
-					bool transfer_spare, int access_type, 
-					int op)
+static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
+							bool ecc_en,
+							bool transfer_spare,
+							int access_type,
+							int op)
 {
 	int status = PASS;
-	uint32_t addr = 0x0, cmd = 0x0, page_count = 1, irq_status = 0, 
+	uint32_t addr = 0x0, cmd = 0x0, page_count = 1, irq_status = 0,
 		 irq_mask = 0;
 
-	if (op == DENALI_READ) irq_mask = INTR_STATUS0__LOAD_COMP;
-	else if (op == DENALI_WRITE) irq_mask = 0;
-	else BUG();
+	if (op == DENALI_READ)
+		irq_mask = INTR_STATUS__LOAD_COMP;
+	else if (op == DENALI_WRITE)
+		irq_mask = 0;
+	else
+		BUG();
 
 	setup_ecc_for_xfer(denali, ecc_en, transfer_spare);
 
-#if DEBUG_DENALI
-	spin_lock_irq(&denali->irq_lock);
-	denali->irq_debug_array[denali->idx++] = 0x40000000 | ioread32(denali->flash_reg + ECC_ENABLE) | (access_type << 4);
-	denali->idx %= 32;
-	spin_unlock_irq(&denali->irq_lock);
-#endif
-
-
 	/* clear interrupts */
-	clear_interrupts(denali);	
+	clear_interrupts(denali);
 
 	addr = BANK(denali->flash_bank) | denali->page;
 
-	if (op == DENALI_WRITE && access_type != SPARE_ACCESS)
-	{
-		cmd = MODE_01 | addr; 
-		denali_write32(cmd, denali->flash_mem);
-	}
-	else if (op == DENALI_WRITE && access_type == SPARE_ACCESS)
-	{
+	if (op == DENALI_WRITE && access_type != SPARE_ACCESS) {
+		cmd = MODE_01 | addr;
+		iowrite32(cmd, denali->flash_mem);
+	} else if (op == DENALI_WRITE && access_type == SPARE_ACCESS) {
 		/* read spare area */
-		cmd = MODE_10 | addr; 
+		cmd = MODE_10 | addr;
 		index_addr(denali, (uint32_t)cmd, access_type);
 
-		cmd = MODE_01 | addr; 
-		denali_write32(cmd, denali->flash_mem);
-	}
-	else if (op == DENALI_READ)
-	{
+		cmd = MODE_01 | addr;
+		iowrite32(cmd, denali->flash_mem);
+	} else if (op == DENALI_READ) {
 		/* setup page read request for access type */
-		cmd = MODE_10 | addr; 
+		cmd = MODE_10 | addr;
 		index_addr(denali, (uint32_t)cmd, access_type);
 
 		/* page 33 of the NAND controller spec indicates we should not
-		   use the pipeline commands in Spare area only mode. So we 
+		   use the pipeline commands in Spare area only mode. So we
 		   don't.
 		 */
-		if (access_type == SPARE_ACCESS)
-		{
+		if (access_type == SPARE_ACCESS) {
 			cmd = MODE_01 | addr;
-			denali_write32(cmd, denali->flash_mem);
-		}
-		else
-		{
-			index_addr(denali, (uint32_t)cmd, 0x2000 | op | page_count);
-	
-			/* wait for command to be accepted  
-			 * can always use status0 bit as the mask is identical for each
+			iowrite32(cmd, denali->flash_mem);
+		} else {
+			index_addr(denali, (uint32_t)cmd,
+					0x2000 | op | page_count);
+
+			/* wait for command to be accepted
+			 * can always use status0 bit as the
+			 * mask is identical for each
 			 * bank. */
 			irq_status = wait_for_irq(denali, irq_mask);
 
-			if (irq_status == 0)
-			{
-				printk(KERN_ERR "cmd, page, addr on timeout "
-					"(0x%x, 0x%x, 0x%x)\n", cmd, denali->page, addr);
+			if (irq_status == 0) {
+				dev_err(denali->dev,
+						"cmd, page, addr on timeout "
+						"(0x%x, 0x%x, 0x%x)\n",
+						cmd, denali->page, addr);
 				status = FAIL;
-			}
-			else
-			{
+			} else {
 				cmd = MODE_01 | addr;
-				denali_write32(cmd, denali->flash_mem);
+				iowrite32(cmd, denali->flash_mem);
 			}
 		}
 	}
@@ -1204,36 +789,35 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali, bool ecc_en
 }
 
 /* helper function that simply writes a buffer to the flash */
-static int write_data_to_flash_mem(struct denali_nand_info *denali, const uint8_t *buf, 
-					int len) 
+static int write_data_to_flash_mem(struct denali_nand_info *denali,
+							const uint8_t *buf,
+							int len)
 {
 	uint32_t i = 0, *buf32;
 
-	/* verify that the len is a multiple of 4. see comment in 
-	 * read_data_from_flash_mem() */	
+	/* verify that the len is a multiple of 4. see comment in
+	 * read_data_from_flash_mem() */
 	BUG_ON((len % 4) != 0);
 
 	/* write the data to the flash memory */
 	buf32 = (uint32_t *)buf;
 	for (i = 0; i < len / 4; i++)
-	{
-		denali_write32(*buf32++, denali->flash_mem + 0x10);
-	}
-	return i*4; /* intent is to return the number of bytes read */ 
+		iowrite32(*buf32++, denali->flash_mem + 0x10);
+	return i*4; /* intent is to return the number of bytes read */
 }
 
 /* helper function that simply reads a buffer from the flash */
-static int read_data_from_flash_mem(struct denali_nand_info *denali, uint8_t *buf, 
-					int len)
+static int read_data_from_flash_mem(struct denali_nand_info *denali,
+								uint8_t *buf,
+								int len)
 {
 	uint32_t i = 0, *buf32;
 
 	/* we assume that len will be a multiple of 4, if not
 	 * it would be nice to know about it ASAP rather than
-	 * have random failures... 
-         *	
-	 * This assumption is based on the fact that this 
-	 * function is designed to be used to read flash pages, 
+	 * have random failures...
+	 * This assumption is based on the fact that this
+	 * function is designed to be used to read flash pages,
 	 * which are typically multiples of 4...
 	 */
 
@@ -1242,10 +826,8 @@ static int read_data_from_flash_mem(struct denali_nand_info *denali, uint8_t *bu
 	/* transfer the data from the flash */
 	buf32 = (uint32_t *)buf;
 	for (i = 0; i < len / 4; i++)
-	{
 		*buf32++ = ioread32(denali->flash_mem + 0x10);
-	}
-	return i*4; /* intent is to return the number of bytes read */ 
+	return i*4; /* intent is to return the number of bytes read */
 }
 
 /* writes OOB data to the device */
@@ -1253,38 +835,26 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
 {
 	struct denali_nand_info *denali = mtd_to_denali(mtd);
 	uint32_t irq_status = 0;
-	uint32_t irq_mask = INTR_STATUS0__PROGRAM_COMP | 
-						INTR_STATUS0__PROGRAM_FAIL;
+	uint32_t irq_mask = INTR_STATUS__PROGRAM_COMP |
+						INTR_STATUS__PROGRAM_FAIL;
 	int status = 0;
 
 	denali->page = page;
 
-	if (denali_send_pipeline_cmd(denali, false, false, SPARE_ACCESS, 
-							DENALI_WRITE) == PASS) 
-	{
+	if (denali_send_pipeline_cmd(denali, false, false, SPARE_ACCESS,
+							DENALI_WRITE) == PASS) {
 		write_data_to_flash_mem(denali, buf, mtd->oobsize);
 
-#if DEBUG_DENALI
-		spin_lock_irq(&denali->irq_lock);
-		denali->irq_debug_array[denali->idx++] = 0x80000000 | mtd->oobsize;
-		denali->idx %= 32;
-		spin_unlock_irq(&denali->irq_lock);
-#endif
-
-	
 		/* wait for operation to complete */
 		irq_status = wait_for_irq(denali, irq_mask);
 
-		if (irq_status == 0)
-		{
-			printk(KERN_ERR "OOB write failed\n");
+		if (irq_status == 0) {
+			dev_err(denali->dev, "OOB write failed\n");
 			status = -EIO;
 		}
-	}
-	else 
-	{ 	
-		printk(KERN_ERR "unable to send pipeline command\n");
-		status = -EIO; 
+	} else {
+		dev_err(denali->dev, "unable to send pipeline command\n");
+		status = -EIO;
 	}
 	return status;
 }
@@ -1293,60 +863,45 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
 static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
 {
 	struct denali_nand_info *denali = mtd_to_denali(mtd);
-	uint32_t irq_mask = INTR_STATUS0__LOAD_COMP, irq_status = 0, addr = 0x0, cmd = 0x0;
+	uint32_t irq_mask = INTR_STATUS__LOAD_COMP,
+			 irq_status = 0, addr = 0x0, cmd = 0x0;
 
 	denali->page = page;
 
-#if DEBUG_DENALI
-	printk("read_oob %d\n", page);
-#endif
-	if (denali_send_pipeline_cmd(denali, false, true, SPARE_ACCESS, 
-							DENALI_READ) == PASS) 
-	{
-		read_data_from_flash_mem(denali, buf, mtd->oobsize);	
+	if (denali_send_pipeline_cmd(denali, false, true, SPARE_ACCESS,
+							DENALI_READ) == PASS) {
+		read_data_from_flash_mem(denali, buf, mtd->oobsize);
 
-		/* wait for command to be accepted  
+		/* wait for command to be accepted
 		 * can always use status0 bit as the mask is identical for each
 		 * bank. */
 		irq_status = wait_for_irq(denali, irq_mask);
 
 		if (irq_status == 0)
-		{
-			printk(KERN_ERR "page on OOB timeout %d\n", denali->page);
-		}
+			dev_err(denali->dev, "page on OOB timeout %d\n",
+					denali->page);
 
 		/* We set the device back to MAIN_ACCESS here as I observed
 		 * instability with the controller if you do a block erase
 		 * and the last transaction was a SPARE_ACCESS. Block erase
 		 * is reliable (according to the MTD test infrastructure)
-		 * if you are in MAIN_ACCESS. 
+		 * if you are in MAIN_ACCESS.
 		 */
 		addr = BANK(denali->flash_bank) | denali->page;
-		cmd = MODE_10 | addr; 
+		cmd = MODE_10 | addr;
 		index_addr(denali, (uint32_t)cmd, MAIN_ACCESS);
-
-#if DEBUG_DENALI
-		spin_lock_irq(&denali->irq_lock);
-		denali->irq_debug_array[denali->idx++] = 0x60000000 | mtd->oobsize;
-		denali->idx %= 32;
-		spin_unlock_irq(&denali->irq_lock);
-#endif
 	}
 }
 
-/* this function examines buffers to see if they contain data that 
+/* this function examines buffers to see if they contain data that
  * indicate that the buffer is part of an erased region of flash.
  */
-bool is_erased(uint8_t *buf, int len)
+static bool is_erased(uint8_t *buf, int len)
 {
 	int i = 0;
 	for (i = 0; i < len; i++)
-	{	
 		if (buf[i] != 0xFF)
-		{
 			return false;
-		}
-	}
 	return true;
 }
 #define ECC_SECTOR_SIZE 512
@@ -1354,72 +909,74 @@ bool is_erased(uint8_t *buf, int len)
 #define ECC_SECTOR(x)	(((x) & ECC_ERROR_ADDRESS__SECTOR_NR) >> 12)
 #define ECC_BYTE(x)	(((x) & ECC_ERROR_ADDRESS__OFFSET))
 #define ECC_CORRECTION_VALUE(x) ((x) & ERR_CORRECTION_INFO__BYTEMASK)
-#define ECC_ERROR_CORRECTABLE(x) (!((x) & ERR_CORRECTION_INFO))
-#define ECC_ERR_DEVICE(x)	((x) & ERR_CORRECTION_INFO__DEVICE_NR >> 8)
+#define ECC_ERROR_CORRECTABLE(x) (!((x) & ERR_CORRECTION_INFO__ERROR_TYPE))
+#define ECC_ERR_DEVICE(x)	(((x) & ERR_CORRECTION_INFO__DEVICE_NR) >> 8)
 #define ECC_LAST_ERR(x)		((x) & ERR_CORRECTION_INFO__LAST_ERR_INFO)
 
-static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf, 
-			uint8_t *oobbuf, uint32_t irq_status)
+static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
+		       uint32_t irq_status, unsigned int *max_bitflips)
 {
 	bool check_erased_page = false;
+	unsigned int bitflips = 0;
 
-	if (irq_status & INTR_STATUS0__ECC_ERR)
-	{
+	if (irq_status & INTR_STATUS__ECC_ERR) {
 		/* read the ECC errors. we'll ignore them for now */
 		uint32_t err_address = 0, err_correction_info = 0;
 		uint32_t err_byte = 0, err_sector = 0, err_device = 0;
 		uint32_t err_correction_value = 0;
+		denali_set_intr_modes(denali, false);
 
-		do 
-		{
-			err_address = ioread32(denali->flash_reg + 
+		do {
+			err_address = ioread32(denali->flash_reg +
 						ECC_ERROR_ADDRESS);
 			err_sector = ECC_SECTOR(err_address);
 			err_byte = ECC_BYTE(err_address);
 
-
-			err_correction_info = ioread32(denali->flash_reg + 
+			err_correction_info = ioread32(denali->flash_reg +
 						ERR_CORRECTION_INFO);
-			err_correction_value = 
+			err_correction_value =
 				ECC_CORRECTION_VALUE(err_correction_info);
 			err_device = ECC_ERR_DEVICE(err_correction_info);
 
-			if (ECC_ERROR_CORRECTABLE(err_correction_info))
-			{
-				/* offset in our buffer is computed as:
-				   sector number * sector size + offset in 
-				   sector
-				 */
-				int offset = err_sector * ECC_SECTOR_SIZE + 
-								err_byte;
-				if (offset < denali->mtd.writesize)
-				{
+			if (ECC_ERROR_CORRECTABLE(err_correction_info)) {
+				/* If err_byte is larger than ECC_SECTOR_SIZE,
+				 * means error happened in OOB, so we ignore
+				 * it. It's no need for us to correct it
+				 * err_device is represented the NAND error
+				 * bits are happened in if there are more
+				 * than one NAND connected.
+				 * */
+				if (err_byte < ECC_SECTOR_SIZE) {
+					int offset;
+					offset = (err_sector *
+							ECC_SECTOR_SIZE +
+							err_byte) *
+							denali->devnum +
+							err_device;
 					/* correct the ECC error */
 					buf[offset] ^= err_correction_value;
 					denali->mtd.ecc_stats.corrected++;
+					bitflips++;
 				}
-				else
-				{
-					/* bummer, couldn't correct the error */
-					printk(KERN_ERR "ECC offset invalid\n");
-					denali->mtd.ecc_stats.failed++;
-				}
-			}
-			else
-			{
-				/* if the error is not correctable, need to 
-				 * look at the page to see if it is an erased page.
-				 * if so, then it's not a real ECC error */	
+			} else {
+				/* if the error is not correctable, need to
+				 * look at the page to see if it is an erased
+				 * page. if so, then it's not a real ECC error
+				 * */
 				check_erased_page = true;
 			}
-
-#if DEBUG_DENALI 
-			printk("Detected ECC error in page %d: err_addr = 0x%08x,"
-				" info to fix is 0x%08x\n", denali->page, err_address, 
-				err_correction_info);
-#endif
 		} while (!ECC_LAST_ERR(err_correction_info));
+		/* Once handle all ecc errors, controller will triger
+		 * a ECC_TRANSACTION_DONE interrupt, so here just wait
+		 * for a while for this interrupt
+		 * */
+		while (!(read_interrupt_status(denali) &
+				INTR_STATUS__ECC_TRANSACTION_DONE))
+			cpu_relax();
+		clear_interrupts(denali);
+		denali_set_intr_modes(denali, true);
 	}
+	*max_bitflips = bitflips;
 	return check_erased_page;
 }
 
@@ -1428,9 +985,10 @@ static void denali_enable_dma(struct denali_nand_info *denali, bool en)
 {
 	uint32_t reg_val = 0x0;
 
-	if (en) reg_val = DMA_ENABLE__FLAG;
+	if (en)
+		reg_val = DMA_ENABLE__FLAG;
 
-	denali_write32(reg_val, denali->flash_reg + DMA_ENABLE);
+	iowrite32(reg_val, denali->flash_reg + DMA_ENABLE);
 	ioread32(denali->flash_reg + DMA_ENABLE);
 }
 
@@ -1458,20 +1016,19 @@ static void denali_setup_dma(struct denali_nand_info *denali, int op)
 	index_addr(denali, mode | 0x14000, 0x2400);
 }
 
-/* writes a page. user specifies type, and this function handles the 
-   configuration details. */
-static void write_page(struct mtd_info *mtd, struct nand_chip *chip, 
+/* writes a page. user specifies type, and this function handles the
+ * configuration details. */
+static int write_page(struct mtd_info *mtd, struct nand_chip *chip,
 			const uint8_t *buf, bool raw_xfer)
 {
 	struct denali_nand_info *denali = mtd_to_denali(mtd);
-	struct pci_dev *pci_dev = denali->dev;
 
 	dma_addr_t addr = denali->buf.dma_buf;
 	size_t size = denali->mtd.writesize + denali->mtd.oobsize;
 
 	uint32_t irq_status = 0;
-	uint32_t irq_mask = INTR_STATUS0__DMA_CMD_COMP | 
-						INTR_STATUS0__PROGRAM_FAIL;
+	uint32_t irq_mask = INTR_STATUS__DMA_CMD_COMP |
+						INTR_STATUS__PROGRAM_FAIL;
 
 	/* if it is a raw xfer, we want to disable ecc, and send
 	 * the spare area.
@@ -1483,94 +1040,103 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip,
 	/* copy buffer into DMA buffer */
 	memcpy(denali->buf.buf, buf, mtd->writesize);
 
-	if (raw_xfer)
-	{
+	if (raw_xfer) {
 		/* transfer the data to the spare area */
-		memcpy(denali->buf.buf + mtd->writesize, 
-			chip->oob_poi, 
-			mtd->oobsize); 
+		memcpy(denali->buf.buf + mtd->writesize,
+			chip->oob_poi,
+			mtd->oobsize);
 	}
 
-	pci_dma_sync_single_for_device(pci_dev, addr, size, PCI_DMA_TODEVICE);
+	dma_sync_single_for_device(denali->dev, addr, size, DMA_TO_DEVICE);
 
 	clear_interrupts(denali);
-	denali_enable_dma(denali, true);	
+	denali_enable_dma(denali, true);
 
 	denali_setup_dma(denali, DENALI_WRITE);
 
 	/* wait for operation to complete */
 	irq_status = wait_for_irq(denali, irq_mask);
 
-	if (irq_status == 0)
-	{
-		printk(KERN_ERR "timeout on write_page (type = %d)\n", raw_xfer);
-		denali->status = 
-	   	   (irq_status & INTR_STATUS0__PROGRAM_FAIL) ? NAND_STATUS_FAIL : 
-						   	     PASS;
+	if (irq_status == 0) {
+		dev_err(denali->dev,
+				"timeout on write_page (type = %d)\n",
+				raw_xfer);
+		denali->status =
+			(irq_status & INTR_STATUS__PROGRAM_FAIL) ?
+			NAND_STATUS_FAIL : PASS;
 	}
 
-	denali_enable_dma(denali, false);	
-	pci_dma_sync_single_for_cpu(pci_dev, addr, size, PCI_DMA_TODEVICE);
+	denali_enable_dma(denali, false);
+	dma_sync_single_for_cpu(denali->dev, addr, size, DMA_TO_DEVICE);
+
+	return 0;
 }
 
 /* NAND core entry points */
 
-/* this is the callback that the NAND core calls to write a page. Since 
-   writing a page with ECC or without is similar, all the work is done 
-   by write_page above.   */
-static void denali_write_page(struct mtd_info *mtd, struct nand_chip *chip, 
-				const uint8_t *buf)
+/* this is the callback that the NAND core calls to write a page. Since
+ * writing a page with ECC or without is similar, all the work is done
+ * by write_page above.
+ * */
+static int denali_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+				const uint8_t *buf, int oob_required)
 {
 	/* for regular page writes, we let HW handle all the ECC
-         * data written to the device. */
-	write_page(mtd, chip, buf, false);
+	 * data written to the device. */
+	return write_page(mtd, chip, buf, false);
 }
 
-/* This is the callback that the NAND core calls to write a page without ECC. 
-   raw access is similiar to ECC page writes, so all the work is done in the
-   write_page() function above. 
+/* This is the callback that the NAND core calls to write a page without ECC.
+ * raw access is similar to ECC page writes, so all the work is done in the
+ * write_page() function above.
  */
-static void denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, 
-					const uint8_t *buf)
+static int denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+					const uint8_t *buf, int oob_required)
 {
-	/* for raw page writes, we want to disable ECC and simply write 
+	/* for raw page writes, we want to disable ECC and simply write
 	   whatever data is in the buffer. */
-	write_page(mtd, chip, buf, true);
+	return write_page(mtd, chip, buf, true);
 }
 
-static int denali_write_oob(struct mtd_info *mtd, struct nand_chip *chip, 
+static int denali_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
 			    int page)
 {
-	return write_oob_data(mtd, chip->oob_poi, page);	
+	return write_oob_data(mtd, chip->oob_poi, page);
 }
 
-static int denali_read_oob(struct mtd_info *mtd, struct nand_chip *chip, 
-			   int page, int sndcmd)
+static int denali_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
+			   int page)
 {
 	read_oob_data(mtd, chip->oob_poi, page);
 
-	return 0; /* notify NAND core to send command to 
-                   * NAND device. */
+	return 0;
 }
 
 static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
-			    uint8_t *buf, int page)
+			    uint8_t *buf, int oob_required, int page)
 {
+	unsigned int max_bitflips;
 	struct denali_nand_info *denali = mtd_to_denali(mtd);
-	struct pci_dev *pci_dev = denali->dev;
 
 	dma_addr_t addr = denali->buf.dma_buf;
 	size_t size = denali->mtd.writesize + denali->mtd.oobsize;
 
 	uint32_t irq_status = 0;
-	uint32_t irq_mask = INTR_STATUS0__ECC_TRANSACTION_DONE | 
-			    INTR_STATUS0__ECC_ERR;
+	uint32_t irq_mask = INTR_STATUS__ECC_TRANSACTION_DONE |
+			    INTR_STATUS__ECC_ERR;
 	bool check_erased_page = false;
 
+	if (page != denali->page) {
+		dev_err(denali->dev, "IN %s: page %d is not"
+				" equal to denali->page %d, investigate!!",
+				__func__, page, denali->page);
+		BUG();
+	}
+
 	setup_ecc_for_xfer(denali, true, false);
 
 	denali_enable_dma(denali, true);
-	pci_dma_sync_single_for_device(pci_dev, addr, size, PCI_DMA_FROMDEVICE);
+	dma_sync_single_for_device(denali->dev, addr, size, DMA_FROM_DEVICE);
 
 	clear_interrupts(denali);
 	denali_setup_dma(denali, DENALI_READ);
@@ -1578,49 +1144,49 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 	/* wait for operation to complete */
 	irq_status = wait_for_irq(denali, irq_mask);
 
-	pci_dma_sync_single_for_cpu(pci_dev, addr, size, PCI_DMA_FROMDEVICE);
+	dma_sync_single_for_cpu(denali->dev, addr, size, DMA_FROM_DEVICE);
 
 	memcpy(buf, denali->buf.buf, mtd->writesize);
-	
-	check_erased_page = handle_ecc(denali, buf, chip->oob_poi, irq_status);
+
+	check_erased_page = handle_ecc(denali, buf, irq_status, &max_bitflips);
 	denali_enable_dma(denali, false);
 
-	if (check_erased_page)
-	{
+	if (check_erased_page) {
 		read_oob_data(&denali->mtd, chip->oob_poi, denali->page);
 
 		/* check ECC failures that may have occurred on erased pages */
-		if (check_erased_page)
-		{
+		if (check_erased_page) {
 			if (!is_erased(buf, denali->mtd.writesize))
-			{
 				denali->mtd.ecc_stats.failed++;
-			}
 			if (!is_erased(buf, denali->mtd.oobsize))
-			{
 				denali->mtd.ecc_stats.failed++;
-			}
-		}	
+		}
 	}
-	return 0;
+	return max_bitflips;
 }
 
 static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
-				uint8_t *buf, int page)
+				uint8_t *buf, int oob_required, int page)
 {
 	struct denali_nand_info *denali = mtd_to_denali(mtd);
-	struct pci_dev *pci_dev = denali->dev;
 
 	dma_addr_t addr = denali->buf.dma_buf;
 	size_t size = denali->mtd.writesize + denali->mtd.oobsize;
 
 	uint32_t irq_status = 0;
-	uint32_t irq_mask = INTR_STATUS0__DMA_CMD_COMP;
-						
+	uint32_t irq_mask = INTR_STATUS__DMA_CMD_COMP;
+
+	if (page != denali->page) {
+		dev_err(denali->dev, "IN %s: page %d is not"
+				" equal to denali->page %d, investigate!!",
+				__func__, page, denali->page);
+		BUG();
+	}
+
 	setup_ecc_for_xfer(denali, false, true);
 	denali_enable_dma(denali, true);
 
-	pci_dma_sync_single_for_device(pci_dev, addr, size, PCI_DMA_FROMDEVICE);
+	dma_sync_single_for_device(denali->dev, addr, size, DMA_FROM_DEVICE);
 
 	clear_interrupts(denali);
 	denali_setup_dma(denali, DENALI_READ);
@@ -1628,7 +1194,7 @@ static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
 	/* wait for operation to complete */
 	irq_status = wait_for_irq(denali, irq_mask);
 
-	pci_dma_sync_single_for_cpu(pci_dev, addr, size, PCI_DMA_FROMDEVICE);
+	dma_sync_single_for_cpu(denali->dev, addr, size, DMA_FROM_DEVICE);
 
 	denali_enable_dma(denali, false);
 
@@ -1644,22 +1210,15 @@ static uint8_t denali_read_byte(struct mtd_info *mtd)
 	uint8_t result = 0xff;
 
 	if (denali->buf.head < denali->buf.tail)
-	{
 		result = denali->buf.buf[denali->buf.head++];
-	}
 
-#if DEBUG_DENALI
-	printk("read byte -> 0x%02x\n", result);
-#endif
 	return result;
 }
 
 static void denali_select_chip(struct mtd_info *mtd, int chip)
 {
 	struct denali_nand_info *denali = mtd_to_denali(mtd);
-#if DEBUG_DENALI
-	printk("denali select chip %d\n", chip);
-#endif
+
 	spin_lock_irq(&denali->irq_lock);
 	denali->flash_bank = chip;
 	spin_unlock_irq(&denali->irq_lock);
@@ -1671,107 +1230,101 @@ static int denali_waitfunc(struct mtd_info *mtd, struct nand_chip *chip)
 	int status = denali->status;
 	denali->status = 0;
 
-#if DEBUG_DENALI
-	printk("waitfunc %d\n", status);
-#endif
 	return status;
 }
 
-static void denali_erase(struct mtd_info *mtd, int page)
+static int denali_erase(struct mtd_info *mtd, int page)
 {
 	struct denali_nand_info *denali = mtd_to_denali(mtd);
 
 	uint32_t cmd = 0x0, irq_status = 0;
 
-#if DEBUG_DENALI
-	printk("erase page: %d\n", page);
-#endif
 	/* clear interrupts */
-	clear_interrupts(denali);	
+	clear_interrupts(denali);
 
 	/* setup page read request for access type */
 	cmd = MODE_10 | BANK(denali->flash_bank) | page;
 	index_addr(denali, (uint32_t)cmd, 0x1);
 
 	/* wait for erase to complete or failure to occur */
-	irq_status = wait_for_irq(denali, INTR_STATUS0__ERASE_COMP | 
-					INTR_STATUS0__ERASE_FAIL);
+	irq_status = wait_for_irq(denali, INTR_STATUS__ERASE_COMP |
+					INTR_STATUS__ERASE_FAIL);
 
-	denali->status = (irq_status & INTR_STATUS0__ERASE_FAIL) ? NAND_STATUS_FAIL : 
-								 PASS;
+	return (irq_status & INTR_STATUS__ERASE_FAIL) ? NAND_STATUS_FAIL : PASS;
 }
 
-static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col, 
+static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
 			   int page)
 {
 	struct denali_nand_info *denali = mtd_to_denali(mtd);
+	uint32_t addr, id;
+	int i;
 
-#if DEBUG_DENALI
-	printk("cmdfunc: 0x%x %d %d\n", cmd, col, page);
-#endif
-	switch (cmd)
-	{ 
-		case NAND_CMD_PAGEPROG:
-			break;
-		case NAND_CMD_STATUS:
-			read_status(denali);
-			break;
-		case NAND_CMD_READID:
-			reset_buf(denali);
-			if (denali->flash_bank < denali->total_used_banks)
-			{
-				/* write manufacturer information into nand 
-				   buffer for NAND subsystem to fetch.
-  			         */ 
-	                        write_byte_to_buf(denali, denali->dev_info.wDeviceMaker);
-	                        write_byte_to_buf(denali, denali->dev_info.wDeviceID);
-	                        write_byte_to_buf(denali, denali->dev_info.bDeviceParam0);
-	                        write_byte_to_buf(denali, denali->dev_info.bDeviceParam1);
-	                        write_byte_to_buf(denali, denali->dev_info.bDeviceParam2);
-			}
-			else 
-			{
-				int i;
-				for (i = 0; i < 5; i++) 
-					write_byte_to_buf(denali, 0xff);
-			}
-			break;
-		case NAND_CMD_READ0:
-		case NAND_CMD_SEQIN:
-			denali->page = page;
-			break;
-		case NAND_CMD_RESET:
-			reset_bank(denali);
-			break;
-		case NAND_CMD_READOOB:
-			/* TODO: Read OOB data */
-			break;
-		default:
-			printk(KERN_ERR ": unsupported command received 0x%x\n", cmd);
-			break;
+	switch (cmd) {
+	case NAND_CMD_PAGEPROG:
+		break;
+	case NAND_CMD_STATUS:
+		read_status(denali);
+		break;
+	case NAND_CMD_READID:
+	case NAND_CMD_PARAM:
+		reset_buf(denali);
+		/*sometimes ManufactureId read from register is not right
+		 * e.g. some of Micron MT29F32G08QAA MLC NAND chips
+		 * So here we send READID cmd to NAND insteand
+		 * */
+		addr = (uint32_t)MODE_11 | BANK(denali->flash_bank);
+		index_addr(denali, (uint32_t)addr | 0, 0x90);
+		index_addr(denali, (uint32_t)addr | 1, 0);
+		for (i = 0; i < 5; i++) {
+			index_addr_read_data(denali,
+						(uint32_t)addr | 2,
+						&id);
+			write_byte_to_buf(denali, id);
+		}
+		break;
+	case NAND_CMD_READ0:
+	case NAND_CMD_SEQIN:
+		denali->page = page;
+		break;
+	case NAND_CMD_RESET:
+		reset_bank(denali);
+		break;
+	case NAND_CMD_READOOB:
+		/* TODO: Read OOB data */
+		break;
+	default:
+		pr_err(": unsupported command received 0x%x\n", cmd);
+		break;
 	}
 }
 
 /* stubs for ECC functions not used by the NAND core */
-static int denali_ecc_calculate(struct mtd_info *mtd, const uint8_t *data, 
+static int denali_ecc_calculate(struct mtd_info *mtd, const uint8_t *data,
 				uint8_t *ecc_code)
 {
-	printk(KERN_ERR "denali_ecc_calculate called unexpectedly\n");
+	struct denali_nand_info *denali = mtd_to_denali(mtd);
+	dev_err(denali->dev,
+			"denali_ecc_calculate called unexpectedly\n");
 	BUG();
 	return -EIO;
 }
 
-static int denali_ecc_correct(struct mtd_info *mtd, uint8_t *data, 
+static int denali_ecc_correct(struct mtd_info *mtd, uint8_t *data,
 				uint8_t *read_ecc, uint8_t *calc_ecc)
 {
-	printk(KERN_ERR "denali_ecc_correct called unexpectedly\n");
+	struct denali_nand_info *denali = mtd_to_denali(mtd);
+	dev_err(denali->dev,
+			"denali_ecc_correct called unexpectedly\n");
 	BUG();
 	return -EIO;
 }
 
 static void denali_ecc_hwctl(struct mtd_info *mtd, int mode)
 {
-	printk(KERN_ERR "denali_ecc_hwctl called unexpectedly\n");
+	struct denali_nand_info *denali = mtd_to_denali(mtd);
+	dev_err(denali->dev,
+			"denali_ecc_hwctl called unexpectedly\n");
 	BUG();
 }
 /* end NAND core entry points */
@@ -1779,38 +1332,40 @@ static void denali_ecc_hwctl(struct mtd_info *mtd, int mode)
 /* Initialization code to bring the device up to a known good state */
 static void denali_hw_init(struct denali_nand_info *denali)
 {
-	denali_irq_init(denali);
-	NAND_Flash_Reset(denali);
-	denali_write32(0x0F, denali->flash_reg + RB_PIN_ENABLED);
-	denali_write32(CHIP_EN_DONT_CARE__FLAG, denali->flash_reg + CHIP_ENABLE_DONT_CARE);
-
-	denali_write32(0x0, denali->flash_reg + SPARE_AREA_SKIP_BYTES);
-	denali_write32(0xffff, denali->flash_reg + SPARE_AREA_MARKER);
+	/* tell driver how many bit controller will skip before
+	 * writing ECC code in OOB, this register may be already
+	 * set by firmware. So we read this value out.
+	 * if this value is 0, just let it be.
+	 * */
+	denali->bbtskipbytes = ioread32(denali->flash_reg +
+						SPARE_AREA_SKIP_BYTES);
+	detect_max_banks(denali);
+	denali_nand_reset(denali);
+	iowrite32(0x0F, denali->flash_reg + RB_PIN_ENABLED);
+	iowrite32(CHIP_EN_DONT_CARE__FLAG,
+			denali->flash_reg + CHIP_ENABLE_DONT_CARE);
+
+	iowrite32(0xffff, denali->flash_reg + SPARE_AREA_MARKER);
 
 	/* Should set value for these registers when init */
-	denali_write32(0, denali->flash_reg + TWO_ROW_ADDR_CYCLES);
-	denali_write32(1, denali->flash_reg + ECC_ENABLE);
+	iowrite32(0, denali->flash_reg + TWO_ROW_ADDR_CYCLES);
+	iowrite32(1, denali->flash_reg + ECC_ENABLE);
+	denali_nand_timing_set(denali);
+	denali_irq_init(denali);
 }
 
-/* ECC layout for SLC devices. Denali spec indicates SLC fixed at 4 bytes */
-#define ECC_BYTES_SLC   4 * (2048 / ECC_SECTOR_SIZE)
-static struct nand_ecclayout nand_oob_slc = {
-	.eccbytes = 4,
-	.eccpos = { 0, 1, 2, 3 }, /* not used */
-	.oobfree = {{ 
-			.offset = ECC_BYTES_SLC, 
-			.length = 64 - ECC_BYTES_SLC  
-		   }}
+/* Althogh controller spec said SLC ECC is forceb to be 4bit,
+ * but denali controller in MRST only support 15bit and 8bit ECC
+ * correction
+ * */
+#define ECC_8BITS	14
+static struct nand_ecclayout nand_8bit_oob = {
+	.eccbytes = 14,
 };
 
-#define ECC_BYTES_MLC   14 * (2048 / ECC_SECTOR_SIZE)
-static struct nand_ecclayout nand_oob_mlc_14bit = {
-	.eccbytes = 14,
-	.eccpos = { 0, 1, 2, 3, 5, 6, 7, 8, 9, 10, 11, 12, 13 }, /* not used */
-	.oobfree = {{ 
-			.offset = ECC_BYTES_MLC, 
-			.length = 64 - ECC_BYTES_MLC  
-		   }}
+#define ECC_15BITS	26
+static struct nand_ecclayout nand_15bit_oob = {
+	.eccbytes = 26,
 };
 
 static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
@@ -1836,18 +1391,18 @@ static struct nand_bbt_descr bbt_mirror_descr = {
 	.pattern = mirror_pattern,
 };
 
-/* initalize driver data structures */
-void denali_drv_init(struct denali_nand_info *denali)
+/* initialize driver data structures */
+static void denali_drv_init(struct denali_nand_info *denali)
 {
 	denali->idx = 0;
 
 	/* setup interrupt handler */
-	/* the completion object will be used to notify 
+	/* the completion object will be used to notify
 	 * the callee that the interrupt is done */
 	init_completion(&denali->complete);
 
 	/* the spinlock will be used to synchronize the ISR
-	 * with any element that might be access shared 
+	 * with any element that might be access shared
 	 * data (interrupt status) */
 	spin_lock_init(&denali->irq_lock);
 
@@ -1858,148 +1413,41 @@ void denali_drv_init(struct denali_nand_info *denali)
 	denali->irq_status = 0;
 }
 
-/* driver entry point */
-static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+int denali_init(struct denali_nand_info *denali)
 {
-	int ret = -ENODEV;
-	resource_size_t csr_base, mem_base;
-	unsigned long csr_len, mem_len;
-	struct denali_nand_info *denali;
-
-	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
-		       __FILE__, __LINE__, __func__);
-
-	denali = kzalloc(sizeof(*denali), GFP_KERNEL);
-	if (!denali)
-		return -ENOMEM;
+	int ret;
 
-	ret = pci_enable_device(dev);
-	if (ret) {
-		printk(KERN_ERR "Spectra: pci_enable_device failed.\n");
-		goto failed_enable;
-	}
-
-	if (id->driver_data == INTEL_CE4100) {
-		/* Due to a silicon limitation, we can only support 
-		 * ONFI timing mode 1 and below. 
-		 */ 
-		if (onfi_timing_mode < -1 || onfi_timing_mode > 1)
-		{
-			printk("Intel CE4100 only supports ONFI timing mode 1 "
-				"or below\n");
-			ret = -EINVAL;
-			goto failed_enable;
-		}
-		denali->platform = INTEL_CE4100;
-		mem_base = pci_resource_start(dev, 0);
-		mem_len = pci_resource_len(dev, 1);
-		csr_base = pci_resource_start(dev, 1);
-		csr_len = pci_resource_len(dev, 1);
-	} else {
-		denali->platform = INTEL_MRST;
-		csr_base = pci_resource_start(dev, 0);
-		csr_len = pci_resource_start(dev, 0);
-		mem_base = pci_resource_start(dev, 1);
-		mem_len = pci_resource_len(dev, 1);
-		if (!mem_len) {
-			mem_base = csr_base + csr_len;
-			mem_len = csr_len;
-			nand_dbg_print(NAND_DBG_WARN,
-				       "Spectra: No second BAR for PCI device; assuming %08Lx\n",
-				       (uint64_t)csr_base);
+	if (denali->platform == INTEL_CE4100) {
+		/* Due to a silicon limitation, we can only support
+		 * ONFI timing mode 1 and below.
+		 */
+		if (onfi_timing_mode < -1 || onfi_timing_mode > 1) {
+			pr_err("Intel CE4100 only supports ONFI timing mode 1 or below\n");
+			return -EINVAL;
 		}
 	}
 
-	/* Is 32-bit DMA supported? */
-	ret = pci_set_dma_mask(dev, DMA_BIT_MASK(32));
-
-	if (ret)
-	{
-		printk(KERN_ERR "Spectra: no usable DMA configuration\n");
-		goto failed_enable;
-	}
-	denali->buf.dma_buf = pci_map_single(dev, denali->buf.buf, DENALI_BUF_SIZE, 
-					 PCI_DMA_BIDIRECTIONAL);
-
-	if (pci_dma_mapping_error(dev, denali->buf.dma_buf))
-	{
-		printk(KERN_ERR "Spectra: failed to map DMA buffer\n");
-		goto failed_enable;
-	}
-
-	pci_set_master(dev);
-	denali->dev = dev;
-
-	ret = pci_request_regions(dev, DENALI_NAND_NAME);
-	if (ret) {
-		printk(KERN_ERR "Spectra: Unable to request memory regions\n");
-		goto failed_req_csr;
-	}
-
-	denali->flash_reg = ioremap_nocache(csr_base, csr_len);
-	if (!denali->flash_reg) {
-		printk(KERN_ERR "Spectra: Unable to remap memory region\n");
-		ret = -ENOMEM;
-		goto failed_remap_csr;
-	}
-	nand_dbg_print(NAND_DBG_DEBUG, "Spectra: CSR 0x%08Lx -> 0x%p (0x%lx)\n",
-		       (uint64_t)csr_base, denali->flash_reg, csr_len);
-
-	denali->flash_mem = ioremap_nocache(mem_base, mem_len);
-	if (!denali->flash_mem) {
-		printk(KERN_ERR "Spectra: ioremap_nocache failed!");
-		iounmap(denali->flash_reg);
-		ret = -ENOMEM;
-		goto failed_remap_csr;
-	}
-
-	nand_dbg_print(NAND_DBG_WARN,
-		"Spectra: Remapped flash base address: "
-		"0x%p, len: %ld\n",
-		denali->flash_mem, csr_len);
+	/* allocate a temporary buffer for nand_scan_ident() */
+	denali->buf.buf = devm_kzalloc(denali->dev, PAGE_SIZE,
+					GFP_DMA | GFP_KERNEL);
+	if (!denali->buf.buf)
+		return -ENOMEM;
 
+	denali->mtd.dev.parent = denali->dev;
 	denali_hw_init(denali);
 	denali_drv_init(denali);
 
-	nand_dbg_print(NAND_DBG_DEBUG, "Spectra: IRQ %d\n", dev->irq);
-	if (request_irq(dev->irq, denali_isr, IRQF_SHARED,
+	/* denali_isr register is done after all the hardware
+	 * initilization is finished*/
+	if (request_irq(denali->irq, denali_isr, IRQF_SHARED,
 			DENALI_NAND_NAME, denali)) {
-		printk(KERN_ERR "Spectra: Unable to allocate IRQ\n");
-		ret = -ENODEV;
-		goto failed_request_irq;
+		pr_err("Spectra: Unable to allocate IRQ\n");
+		return -ENODEV;
 	}
 
 	/* now that our ISR is registered, we can enable interrupts */
-	NAND_LLD_Enable_Disable_Interrupts(denali, true);
-
-	pci_set_drvdata(dev, denali);
-
-	NAND_Read_Device_ID(denali);
-
-	/* MTD supported page sizes vary by kernel. We validate our 
-           kernel supports the device here.
-	 */
-	if (denali->dev_info.wPageSize > NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE)
-	{
-		ret = -ENODEV;
-		printk(KERN_ERR "Spectra: device size not supported by this "
-			"version of MTD.");
-		goto failed_nand;
-	}
-
-	nand_dbg_print(NAND_DBG_DEBUG, "Dump timing register values:"
-			"acc_clks: %d, re_2_we: %d, we_2_re: %d,"
-			"addr_2_data: %d, rdwr_en_lo_cnt: %d, "
-			"rdwr_en_hi_cnt: %d, cs_setup_cnt: %d\n",
-			ioread32(denali->flash_reg + ACC_CLKS),
-			ioread32(denali->flash_reg + RE_2_WE),
-			ioread32(denali->flash_reg + WE_2_RE),
-			ioread32(denali->flash_reg + ADDR_2_DATA),
-			ioread32(denali->flash_reg + RDWR_EN_LO_CNT),
-			ioread32(denali->flash_reg + RDWR_EN_HI_CNT),
-			ioread32(denali->flash_reg + CS_SETUP_CNT));
-
-	denali->mtd.name = "Denali NAND";
+	denali_set_intr_modes(denali, true);
+	denali->mtd.name = "denali-nand";
 	denali->mtd.owner = THIS_MODULE;
 	denali->mtd.priv = &denali->nand;
 
@@ -2009,126 +1457,160 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	denali->nand.read_byte = denali_read_byte;
 	denali->nand.waitfunc = denali_waitfunc;
 
-	/* scan for NAND devices attached to the controller 
+	/* scan for NAND devices attached to the controller
 	 * this is the first stage in a two step process to register
-	 * with the nand subsystem */	
-	if (nand_scan_ident(&denali->mtd, LLD_MAX_FLASH_BANKS, NULL))
-	{
+	 * with the nand subsystem */
+	if (nand_scan_ident(&denali->mtd, denali->max_banks, NULL)) {
 		ret = -ENXIO;
-		goto failed_nand;
+		goto failed_req_irq;
 	}
-	
-	/* second stage of the NAND scan 
-	 * this stage requires information regarding ECC and 
-         * bad block management. */
+
+	/* allocate the right size buffer now */
+	devm_kfree(denali->dev, denali->buf.buf);
+	denali->buf.buf = devm_kzalloc(denali->dev,
+			     denali->mtd.writesize + denali->mtd.oobsize,
+			     GFP_KERNEL);
+	if (!denali->buf.buf) {
+		ret = -ENOMEM;
+		goto failed_req_irq;
+	}
+
+	/* Is 32-bit DMA supported? */
+	ret = dma_set_mask(denali->dev, DMA_BIT_MASK(32));
+	if (ret) {
+		pr_err("Spectra: no usable DMA configuration\n");
+		goto failed_req_irq;
+	}
+
+	denali->buf.dma_buf = dma_map_single(denali->dev, denali->buf.buf,
+			     denali->mtd.writesize + denali->mtd.oobsize,
+			     DMA_BIDIRECTIONAL);
+	if (dma_mapping_error(denali->dev, denali->buf.dma_buf)) {
+		dev_err(denali->dev, "Spectra: failed to map DMA buffer\n");
+		ret = -EIO;
+		goto failed_req_irq;
+	}
+
+	/* support for multi nand
+	 * MTD known nothing about multi nand,
+	 * so we should tell it the real pagesize
+	 * and anything necessery
+	 */
+	denali->devnum = ioread32(denali->flash_reg + DEVICES_CONNECTED);
+	denali->nand.chipsize <<= (denali->devnum - 1);
+	denali->nand.page_shift += (denali->devnum - 1);
+	denali->nand.pagemask = (denali->nand.chipsize >>
+						denali->nand.page_shift) - 1;
+	denali->nand.bbt_erase_shift += (denali->devnum - 1);
+	denali->nand.phys_erase_shift = denali->nand.bbt_erase_shift;
+	denali->nand.chip_shift += (denali->devnum - 1);
+	denali->mtd.writesize <<= (denali->devnum - 1);
+	denali->mtd.oobsize <<= (denali->devnum - 1);
+	denali->mtd.erasesize <<= (denali->devnum - 1);
+	denali->mtd.size = denali->nand.numchips * denali->nand.chipsize;
+	denali->bbtskipbytes *= denali->devnum;
+
+	/* second stage of the NAND scan
+	 * this stage requires information regarding ECC and
+	 * bad block management. */
 
 	/* Bad block management */
 	denali->nand.bbt_td = &bbt_main_descr;
 	denali->nand.bbt_md = &bbt_mirror_descr;
 
 	/* skip the scan for now until we have OOB read and write support */
-	denali->nand.options |= NAND_USE_FLASH_BBT | NAND_SKIP_BBTSCAN;
+	denali->nand.bbt_options |= NAND_BBT_USE_FLASH;
+	denali->nand.options |= NAND_SKIP_BBTSCAN;
 	denali->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
 
-	if (denali->dev_info.MLCDevice)
-	{
-		denali->nand.ecc.layout = &nand_oob_mlc_14bit;
-		denali->nand.ecc.bytes = ECC_BYTES_MLC;
-	}
-	else /* SLC */
-	{
-		denali->nand.ecc.layout = &nand_oob_slc;
-		denali->nand.ecc.bytes = ECC_BYTES_SLC;
+	/* Denali Controller only support 15bit and 8bit ECC in MRST,
+	 * so just let controller do 15bit ECC for MLC and 8bit ECC for
+	 * SLC if possible.
+	 * */
+	if (!nand_is_slc(&denali->nand) &&
+			(denali->mtd.oobsize > (denali->bbtskipbytes +
+			ECC_15BITS * (denali->mtd.writesize /
+			ECC_SECTOR_SIZE)))) {
+		/* if MLC OOB size is large enough, use 15bit ECC*/
+		denali->nand.ecc.strength = 15;
+		denali->nand.ecc.layout = &nand_15bit_oob;
+		denali->nand.ecc.bytes = ECC_15BITS;
+		iowrite32(15, denali->flash_reg + ECC_CORRECTION);
+	} else if (denali->mtd.oobsize < (denali->bbtskipbytes +
+			ECC_8BITS * (denali->mtd.writesize /
+			ECC_SECTOR_SIZE))) {
+		pr_err("Your NAND chip OOB is not large enough to \
+				contain 8bit ECC correction codes");
+		goto failed_req_irq;
+	} else {
+		denali->nand.ecc.strength = 8;
+		denali->nand.ecc.layout = &nand_8bit_oob;
+		denali->nand.ecc.bytes = ECC_8BITS;
+		iowrite32(8, denali->flash_reg + ECC_CORRECTION);
 	}
 
-	/* These functions are required by the NAND core framework, otherwise, 
-           the NAND core will assert. However, we don't need them, so we'll stub 
-           them out. */
+	denali->nand.ecc.bytes *= denali->devnum;
+	denali->nand.ecc.strength *= denali->devnum;
+	denali->nand.ecc.layout->eccbytes *=
+		denali->mtd.writesize / ECC_SECTOR_SIZE;
+	denali->nand.ecc.layout->oobfree[0].offset =
+		denali->bbtskipbytes + denali->nand.ecc.layout->eccbytes;
+	denali->nand.ecc.layout->oobfree[0].length =
+		denali->mtd.oobsize - denali->nand.ecc.layout->eccbytes -
+		denali->bbtskipbytes;
+
+	/* Let driver know the total blocks number and
+	 * how many blocks contained by each nand chip.
+	 * blksperchip will help driver to know how many
+	 * blocks is taken by FW.
+	 * */
+	denali->totalblks = denali->mtd.size >>
+				denali->nand.phys_erase_shift;
+	denali->blksperchip = denali->totalblks / denali->nand.numchips;
+
+	/* These functions are required by the NAND core framework, otherwise,
+	 * the NAND core will assert. However, we don't need them, so we'll stub
+	 * them out. */
 	denali->nand.ecc.calculate = denali_ecc_calculate;
 	denali->nand.ecc.correct = denali_ecc_correct;
 	denali->nand.ecc.hwctl = denali_ecc_hwctl;
 
 	/* override the default read operations */
-	denali->nand.ecc.size = denali->mtd.writesize;
+	denali->nand.ecc.size = ECC_SECTOR_SIZE * denali->devnum;
 	denali->nand.ecc.read_page = denali_read_page;
 	denali->nand.ecc.read_page_raw = denali_read_page_raw;
 	denali->nand.ecc.write_page = denali_write_page;
 	denali->nand.ecc.write_page_raw = denali_write_page_raw;
 	denali->nand.ecc.read_oob = denali_read_oob;
 	denali->nand.ecc.write_oob = denali_write_oob;
-	denali->nand.erase_cmd = denali_erase;
+	denali->nand.erase = denali_erase;
 
-	if (nand_scan_tail(&denali->mtd))
-	{
+	if (nand_scan_tail(&denali->mtd)) {
 		ret = -ENXIO;
-		goto failed_nand;
+		goto failed_req_irq;
 	}
 
-	ret = add_mtd_device(&denali->mtd);
+	ret = mtd_device_register(&denali->mtd, NULL, 0);
 	if (ret) {
-		printk(KERN_ERR "Spectra: Failed to register MTD device: %d\n", ret);
-		goto failed_nand;
+		dev_err(denali->dev, "Spectra: Failed to register MTD: %d\n",
+				ret);
+		goto failed_req_irq;
 	}
 	return 0;
 
- failed_nand:
-	denali_irq_cleanup(dev->irq, denali);
- failed_request_irq:
-	iounmap(denali->flash_reg);
-	iounmap(denali->flash_mem);
- failed_remap_csr:
-	pci_release_regions(dev);
- failed_req_csr:
-	pci_unmap_single(dev, denali->buf.dma_buf, DENALI_BUF_SIZE, 
-							PCI_DMA_BIDIRECTIONAL);
- failed_enable:
-	kfree(denali);
+failed_req_irq:
+	denali_irq_cleanup(denali->irq, denali);
+
 	return ret;
 }
+EXPORT_SYMBOL(denali_init);
 
 /* driver exit point */
-static void denali_pci_remove(struct pci_dev *dev)
+void denali_remove(struct denali_nand_info *denali)
 {
-	struct denali_nand_info *denali = pci_get_drvdata(dev);
-
-	nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
-		       __FILE__, __LINE__, __func__);
-
-	nand_release(&denali->mtd);
-	del_mtd_device(&denali->mtd);
-
-	denali_irq_cleanup(dev->irq, denali);
-
-	iounmap(denali->flash_reg);
-	iounmap(denali->flash_mem);
-	pci_release_regions(dev);
-	pci_disable_device(dev);
-	pci_unmap_single(dev, denali->buf.dma_buf, DENALI_BUF_SIZE, 
-							PCI_DMA_BIDIRECTIONAL);
-	pci_set_drvdata(dev, NULL);
-	kfree(denali);
+	denali_irq_cleanup(denali->irq, denali);
+	dma_unmap_single(denali->dev, denali->buf.dma_buf,
+			denali->mtd.writesize + denali->mtd.oobsize,
+			DMA_BIDIRECTIONAL);
 }
-
-MODULE_DEVICE_TABLE(pci, denali_pci_ids);
-
-static struct pci_driver denali_pci_driver = {
-	.name = DENALI_NAND_NAME,
-	.id_table = denali_pci_ids,
-	.probe = denali_pci_probe,
-	.remove = denali_pci_remove,
-};
-
-static int __devinit denali_init(void)
-{
-	printk(KERN_INFO "Spectra MTD driver built on %s @ %s\n", __DATE__, __TIME__);
-	return pci_register_driver(&denali_pci_driver);
-}
-
-/* Free memory */
-static void __devexit denali_exit(void)
-{
-	pci_unregister_driver(&denali_pci_driver);
-}
-
-module_init(denali_init);
-module_exit(denali_exit);
+EXPORT_SYMBOL(denali_remove);
diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h
index 422a29ab2f6..96681746242 100644
--- a/drivers/mtd/nand/denali.h
+++ b/drivers/mtd/nand/denali.h
@@ -17,7 +17,7 @@
  *
  */
 
-#include <linux/mtd/nand.h> 
+#include <linux/mtd/nand.h>
 
 #define DEVICE_RESET				0x0
 #define     DEVICE_RESET__BANK0				0x0001
@@ -29,7 +29,7 @@
 #define     TRANSFER_SPARE_REG__FLAG			0x0001
 
 #define LOAD_WAIT_CNT				0x20
-#define     LOAD_WAIT_CNT__VALUE				0xffff
+#define     LOAD_WAIT_CNT__VALUE			0xffff
 
 #define PROGRAM_WAIT_CNT			0x30
 #define     PROGRAM_WAIT_CNT__VALUE			0xffff
@@ -83,7 +83,7 @@
 #define RE_2_WE					0x120
 #define     RE_2_WE__VALUE				0x003f
 
-#define ACC_CLKS    				0x130
+#define ACC_CLKS				0x130
 #define     ACC_CLKS__VALUE				0x000f
 
 #define NUMBER_OF_PLANES			0x140
@@ -140,7 +140,7 @@
 #define DEVICES_CONNECTED			0x250
 #define     DEVICES_CONNECTED__VALUE			0x0007
 
-#define DIE_MASK					0x260
+#define DIE_MASK				0x260
 #define     DIE_MASK__VALUE				0x00ff
 
 #define FIRST_BLOCK_OF_NEXT_PLANE		0x270
@@ -152,7 +152,7 @@
 #define RE_2_RE					0x290
 #define     RE_2_RE__VALUE				0x003f
 
-#define MANUFACTURER_ID			0x300
+#define MANUFACTURER_ID				0x300
 #define     MANUFACTURER_ID__VALUE			0x00ff
 
 #define DEVICE_ID				0x310
@@ -173,13 +173,13 @@
 #define LOGICAL_PAGE_SPARE_SIZE			0x360
 #define     LOGICAL_PAGE_SPARE_SIZE__VALUE		0xffff
 
-#define REVISION					0x370
+#define REVISION				0x370
 #define     REVISION__VALUE				0xffff
 
 #define ONFI_DEVICE_FEATURES			0x380
 #define     ONFI_DEVICE_FEATURES__VALUE			0x003f
 
-#define ONFI_OPTIONAL_COMMANDS		0x390
+#define ONFI_OPTIONAL_COMMANDS			0x390
 #define     ONFI_OPTIONAL_COMMANDS__VALUE		0x003f
 
 #define ONFI_TIMING_MODE			0x3a0
@@ -201,195 +201,56 @@
 #define FEATURES					0x3f0
 #define     FEATURES__N_BANKS				0x0003
 #define     FEATURES__ECC_MAX_ERR			0x003c
-#define     FEATURES__DMA					0x0040
+#define     FEATURES__DMA				0x0040
 #define     FEATURES__CMD_DMA				0x0080
 #define     FEATURES__PARTITION				0x0100
 #define     FEATURES__XDMA_SIDEBAND			0x0200
 #define     FEATURES__GPREG				0x0400
-#define     FEATURES__INDEX_ADDR				0x0800
+#define     FEATURES__INDEX_ADDR			0x0800
 
 #define TRANSFER_MODE				0x400
 #define     TRANSFER_MODE__VALUE			0x0003
 
-#define INTR_STATUS0				0x410
-#define     INTR_STATUS0__ECC_TRANSACTION_DONE		0x0001
-#define     INTR_STATUS0__ECC_ERR			0x0002
-#define     INTR_STATUS0__DMA_CMD_COMP			0x0004
-#define     INTR_STATUS0__TIME_OUT			0x0008
-#define     INTR_STATUS0__PROGRAM_FAIL			0x0010
-#define     INTR_STATUS0__ERASE_FAIL			0x0020
-#define     INTR_STATUS0__LOAD_COMP			0x0040
-#define     INTR_STATUS0__PROGRAM_COMP			0x0080
-#define     INTR_STATUS0__ERASE_COMP			0x0100
-#define     INTR_STATUS0__PIPE_CPYBCK_CMD_COMP		0x0200
-#define     INTR_STATUS0__LOCKED_BLK			0x0400
-#define     INTR_STATUS0__UNSUP_CMD			0x0800
-#define     INTR_STATUS0__INT_ACT			0x1000
-#define     INTR_STATUS0__RST_COMP			0x2000
-#define     INTR_STATUS0__PIPE_CMD_ERR			0x4000
-#define     INTR_STATUS0__PAGE_XFER_INC			0x8000
-
-#define INTR_EN0					0x420
-#define     INTR_EN0__ECC_TRANSACTION_DONE		0x0001
-#define     INTR_EN0__ECC_ERR				0x0002
-#define     INTR_EN0__DMA_CMD_COMP			0x0004
-#define     INTR_EN0__TIME_OUT				0x0008
-#define     INTR_EN0__PROGRAM_FAIL			0x0010
-#define     INTR_EN0__ERASE_FAIL				0x0020
-#define     INTR_EN0__LOAD_COMP				0x0040
-#define     INTR_EN0__PROGRAM_COMP			0x0080
-#define     INTR_EN0__ERASE_COMP				0x0100
-#define     INTR_EN0__PIPE_CPYBCK_CMD_COMP		0x0200
-#define     INTR_EN0__LOCKED_BLK				0x0400
-#define     INTR_EN0__UNSUP_CMD				0x0800
-#define     INTR_EN0__INT_ACT				0x1000
-#define     INTR_EN0__RST_COMP				0x2000
-#define     INTR_EN0__PIPE_CMD_ERR			0x4000
-#define     INTR_EN0__PAGE_XFER_INC			0x8000
-
-#define PAGE_CNT0				0x430
-#define     PAGE_CNT0__VALUE				0x00ff
-
-#define ERR_PAGE_ADDR0				0x440
-#define     ERR_PAGE_ADDR0__VALUE			0xffff
-
-#define ERR_BLOCK_ADDR0			0x450
-#define     ERR_BLOCK_ADDR0__VALUE			0xffff
-
-#define INTR_STATUS1				0x460
-#define     INTR_STATUS1__ECC_TRANSACTION_DONE		0x0001
-#define     INTR_STATUS1__ECC_ERR			0x0002
-#define     INTR_STATUS1__DMA_CMD_COMP			0x0004
-#define     INTR_STATUS1__TIME_OUT			0x0008
-#define     INTR_STATUS1__PROGRAM_FAIL			0x0010
-#define     INTR_STATUS1__ERASE_FAIL			0x0020
-#define     INTR_STATUS1__LOAD_COMP			0x0040
-#define     INTR_STATUS1__PROGRAM_COMP			0x0080
-#define     INTR_STATUS1__ERASE_COMP			0x0100
-#define     INTR_STATUS1__PIPE_CPYBCK_CMD_COMP		0x0200
-#define     INTR_STATUS1__LOCKED_BLK			0x0400
-#define     INTR_STATUS1__UNSUP_CMD			0x0800
-#define     INTR_STATUS1__INT_ACT			0x1000
-#define     INTR_STATUS1__RST_COMP			0x2000
-#define     INTR_STATUS1__PIPE_CMD_ERR			0x4000
-#define     INTR_STATUS1__PAGE_XFER_INC			0x8000
-
-#define INTR_EN1					0x470
-#define     INTR_EN1__ECC_TRANSACTION_DONE		0x0001
-#define     INTR_EN1__ECC_ERR				0x0002
-#define     INTR_EN1__DMA_CMD_COMP			0x0004
-#define     INTR_EN1__TIME_OUT				0x0008
-#define     INTR_EN1__PROGRAM_FAIL			0x0010
-#define     INTR_EN1__ERASE_FAIL				0x0020
-#define     INTR_EN1__LOAD_COMP				0x0040
-#define     INTR_EN1__PROGRAM_COMP			0x0080
-#define     INTR_EN1__ERASE_COMP				0x0100
-#define     INTR_EN1__PIPE_CPYBCK_CMD_COMP		0x0200
-#define     INTR_EN1__LOCKED_BLK				0x0400
-#define     INTR_EN1__UNSUP_CMD				0x0800
-#define     INTR_EN1__INT_ACT				0x1000
-#define     INTR_EN1__RST_COMP				0x2000
-#define     INTR_EN1__PIPE_CMD_ERR			0x4000
-#define     INTR_EN1__PAGE_XFER_INC			0x8000
-
-#define PAGE_CNT1				0x480
-#define     PAGE_CNT1__VALUE				0x00ff
-
-#define ERR_PAGE_ADDR1				0x490
-#define     ERR_PAGE_ADDR1__VALUE			0xffff
-
-#define ERR_BLOCK_ADDR1			0x4a0
-#define     ERR_BLOCK_ADDR1__VALUE			0xffff
-
-#define INTR_STATUS2				0x4b0
-#define     INTR_STATUS2__ECC_TRANSACTION_DONE		0x0001
-#define     INTR_STATUS2__ECC_ERR			0x0002
-#define     INTR_STATUS2__DMA_CMD_COMP			0x0004
-#define     INTR_STATUS2__TIME_OUT			0x0008
-#define     INTR_STATUS2__PROGRAM_FAIL			0x0010
-#define     INTR_STATUS2__ERASE_FAIL			0x0020
-#define     INTR_STATUS2__LOAD_COMP			0x0040
-#define     INTR_STATUS2__PROGRAM_COMP			0x0080
-#define     INTR_STATUS2__ERASE_COMP			0x0100
-#define     INTR_STATUS2__PIPE_CPYBCK_CMD_COMP		0x0200
-#define     INTR_STATUS2__LOCKED_BLK			0x0400
-#define     INTR_STATUS2__UNSUP_CMD			0x0800
-#define     INTR_STATUS2__INT_ACT			0x1000
-#define     INTR_STATUS2__RST_COMP			0x2000
-#define     INTR_STATUS2__PIPE_CMD_ERR			0x4000
-#define     INTR_STATUS2__PAGE_XFER_INC			0x8000
-
-#define INTR_EN2					0x4c0
-#define     INTR_EN2__ECC_TRANSACTION_DONE		0x0001
-#define     INTR_EN2__ECC_ERR				0x0002
-#define     INTR_EN2__DMA_CMD_COMP			0x0004
-#define     INTR_EN2__TIME_OUT				0x0008
-#define     INTR_EN2__PROGRAM_FAIL			0x0010
-#define     INTR_EN2__ERASE_FAIL				0x0020
-#define     INTR_EN2__LOAD_COMP				0x0040
-#define     INTR_EN2__PROGRAM_COMP			0x0080
-#define     INTR_EN2__ERASE_COMP				0x0100
-#define     INTR_EN2__PIPE_CPYBCK_CMD_COMP		0x0200
-#define     INTR_EN2__LOCKED_BLK				0x0400
-#define     INTR_EN2__UNSUP_CMD				0x0800
-#define     INTR_EN2__INT_ACT				0x1000
-#define     INTR_EN2__RST_COMP				0x2000
-#define     INTR_EN2__PIPE_CMD_ERR			0x4000
-#define     INTR_EN2__PAGE_XFER_INC			0x8000
-
-#define PAGE_CNT2				0x4d0
-#define     PAGE_CNT2__VALUE				0x00ff
-
-#define ERR_PAGE_ADDR2				0x4e0
-#define     ERR_PAGE_ADDR2__VALUE			0xffff
-
-#define ERR_BLOCK_ADDR2			0x4f0
-#define     ERR_BLOCK_ADDR2__VALUE			0xffff
-
-#define INTR_STATUS3				0x500
-#define     INTR_STATUS3__ECC_TRANSACTION_DONE		0x0001
-#define     INTR_STATUS3__ECC_ERR			0x0002
-#define     INTR_STATUS3__DMA_CMD_COMP			0x0004
-#define     INTR_STATUS3__TIME_OUT			0x0008
-#define     INTR_STATUS3__PROGRAM_FAIL			0x0010
-#define     INTR_STATUS3__ERASE_FAIL			0x0020
-#define     INTR_STATUS3__LOAD_COMP			0x0040
-#define     INTR_STATUS3__PROGRAM_COMP			0x0080
-#define     INTR_STATUS3__ERASE_COMP			0x0100
-#define     INTR_STATUS3__PIPE_CPYBCK_CMD_COMP		0x0200
-#define     INTR_STATUS3__LOCKED_BLK			0x0400
-#define     INTR_STATUS3__UNSUP_CMD			0x0800
-#define     INTR_STATUS3__INT_ACT			0x1000
-#define     INTR_STATUS3__RST_COMP			0x2000
-#define     INTR_STATUS3__PIPE_CMD_ERR			0x4000
-#define     INTR_STATUS3__PAGE_XFER_INC			0x8000
-
-#define INTR_EN3					0x510
-#define     INTR_EN3__ECC_TRANSACTION_DONE		0x0001
-#define     INTR_EN3__ECC_ERR				0x0002
-#define     INTR_EN3__DMA_CMD_COMP			0x0004
-#define     INTR_EN3__TIME_OUT				0x0008
-#define     INTR_EN3__PROGRAM_FAIL			0x0010
-#define     INTR_EN3__ERASE_FAIL				0x0020
-#define     INTR_EN3__LOAD_COMP				0x0040
-#define     INTR_EN3__PROGRAM_COMP			0x0080
-#define     INTR_EN3__ERASE_COMP				0x0100
-#define     INTR_EN3__PIPE_CPYBCK_CMD_COMP		0x0200
-#define     INTR_EN3__LOCKED_BLK				0x0400
-#define     INTR_EN3__UNSUP_CMD				0x0800
-#define     INTR_EN3__INT_ACT				0x1000
-#define     INTR_EN3__RST_COMP				0x2000
-#define     INTR_EN3__PIPE_CMD_ERR			0x4000
-#define     INTR_EN3__PAGE_XFER_INC			0x8000
-
-#define PAGE_CNT3				0x520
-#define     PAGE_CNT3__VALUE				0x00ff
-
-#define ERR_PAGE_ADDR3				0x530
-#define     ERR_PAGE_ADDR3__VALUE			0xffff
-
-#define ERR_BLOCK_ADDR3			0x540
-#define     ERR_BLOCK_ADDR3__VALUE			0xffff
+#define INTR_STATUS(__bank)	(0x410 + ((__bank) * 0x50))
+#define INTR_EN(__bank)		(0x420 + ((__bank) * 0x50))
+
+#define     INTR_STATUS__ECC_TRANSACTION_DONE		0x0001
+#define     INTR_STATUS__ECC_ERR			0x0002
+#define     INTR_STATUS__DMA_CMD_COMP			0x0004
+#define     INTR_STATUS__TIME_OUT			0x0008
+#define     INTR_STATUS__PROGRAM_FAIL			0x0010
+#define     INTR_STATUS__ERASE_FAIL			0x0020
+#define     INTR_STATUS__LOAD_COMP			0x0040
+#define     INTR_STATUS__PROGRAM_COMP			0x0080
+#define     INTR_STATUS__ERASE_COMP			0x0100
+#define     INTR_STATUS__PIPE_CPYBCK_CMD_COMP		0x0200
+#define     INTR_STATUS__LOCKED_BLK			0x0400
+#define     INTR_STATUS__UNSUP_CMD			0x0800
+#define     INTR_STATUS__INT_ACT			0x1000
+#define     INTR_STATUS__RST_COMP			0x2000
+#define     INTR_STATUS__PIPE_CMD_ERR			0x4000
+#define     INTR_STATUS__PAGE_XFER_INC			0x8000
+
+#define     INTR_EN__ECC_TRANSACTION_DONE		0x0001
+#define     INTR_EN__ECC_ERR				0x0002
+#define     INTR_EN__DMA_CMD_COMP			0x0004
+#define     INTR_EN__TIME_OUT				0x0008
+#define     INTR_EN__PROGRAM_FAIL			0x0010
+#define     INTR_EN__ERASE_FAIL				0x0020
+#define     INTR_EN__LOAD_COMP				0x0040
+#define     INTR_EN__PROGRAM_COMP			0x0080
+#define     INTR_EN__ERASE_COMP				0x0100
+#define     INTR_EN__PIPE_CPYBCK_CMD_COMP		0x0200
+#define     INTR_EN__LOCKED_BLK				0x0400
+#define     INTR_EN__UNSUP_CMD				0x0800
+#define     INTR_EN__INT_ACT				0x1000
+#define     INTR_EN__RST_COMP				0x2000
+#define     INTR_EN__PIPE_CMD_ERR			0x4000
+#define     INTR_EN__PAGE_XFER_INC			0x8000
+
+#define PAGE_CNT(__bank)	(0x430 + ((__bank) * 0x50))
+#define ERR_PAGE_ADDR(__bank)	(0x440 + ((__bank) * 0x50))
+#define ERR_BLOCK_ADDR(__bank)	(0x450 + ((__bank) * 0x50))
 
 #define DATA_INTR				0x550
 #define     DATA_INTR__WRITE_SPACE_AV			0x0001
@@ -412,9 +273,9 @@
 #define     GPREG_3__VALUE				0xffff
 
 #define ECC_THRESHOLD				0x600
-#define     ECC_THRESHOLD__VALUE				0x03ff
+#define     ECC_THRESHOLD__VALUE			0x03ff
 
-#define ECC_ERROR_BLOCK_ADDRESS		0x610
+#define ECC_ERROR_BLOCK_ADDRESS			0x610
 #define     ECC_ERROR_BLOCK_ADDRESS__VALUE		0xffff
 
 #define ECC_ERROR_PAGE_ADDRESS			0x620
@@ -466,7 +327,7 @@
 #define     CHNL_ACTIVE__CHANNEL3			0x0008
 
 #define ACTIVE_SRC_ID				0x800
-#define     ACTIVE_SRC_ID__VALUE				0x00ff
+#define     ACTIVE_SRC_ID__VALUE			0x00ff
 
 #define PTN_INTR					0x810
 #define     PTN_INTR__CONFIG_ERROR			0x0001
@@ -484,182 +345,23 @@
 #define     PTN_INTR_EN__ACCESS_ERROR_BANK3		0x0010
 #define     PTN_INTR_EN__REG_ACCESS_ERROR		0x0020
 
-#define PERM_SRC_ID_0				0x830
-#define     PERM_SRC_ID_0__SRCID				0x00ff
-#define     PERM_SRC_ID_0__DIRECT_ACCESS_ACTIVE		0x0800
-#define     PERM_SRC_ID_0__WRITE_ACTIVE			0x2000
-#define     PERM_SRC_ID_0__READ_ACTIVE			0x4000
-#define     PERM_SRC_ID_0__PARTITION_VALID		0x8000
-
-#define MIN_BLK_ADDR_0				0x840
-#define     MIN_BLK_ADDR_0__VALUE			0xffff
-
-#define MAX_BLK_ADDR_0				0x850
-#define     MAX_BLK_ADDR_0__VALUE			0xffff
-
-#define MIN_MAX_BANK_0				0x860
-#define     MIN_MAX_BANK_0__MIN_VALUE			0x0003
-#define     MIN_MAX_BANK_0__MAX_VALUE			0x000c
-
-#define PERM_SRC_ID_1				0x870
-#define     PERM_SRC_ID_1__SRCID				0x00ff
-#define     PERM_SRC_ID_1__DIRECT_ACCESS_ACTIVE		0x0800
-#define     PERM_SRC_ID_1__WRITE_ACTIVE			0x2000
-#define     PERM_SRC_ID_1__READ_ACTIVE			0x4000
-#define     PERM_SRC_ID_1__PARTITION_VALID		0x8000
-
-#define MIN_BLK_ADDR_1				0x880
-#define     MIN_BLK_ADDR_1__VALUE			0xffff
-
-#define MAX_BLK_ADDR_1				0x890
-#define     MAX_BLK_ADDR_1__VALUE			0xffff
-
-#define MIN_MAX_BANK_1				0x8a0
-#define     MIN_MAX_BANK_1__MIN_VALUE			0x0003
-#define     MIN_MAX_BANK_1__MAX_VALUE			0x000c
-
-#define PERM_SRC_ID_2				0x8b0
-#define     PERM_SRC_ID_2__SRCID				0x00ff
-#define     PERM_SRC_ID_2__DIRECT_ACCESS_ACTIVE		0x0800
-#define     PERM_SRC_ID_2__WRITE_ACTIVE			0x2000
-#define     PERM_SRC_ID_2__READ_ACTIVE			0x4000
-#define     PERM_SRC_ID_2__PARTITION_VALID		0x8000
-
-#define MIN_BLK_ADDR_2				0x8c0
-#define     MIN_BLK_ADDR_2__VALUE			0xffff
-
-#define MAX_BLK_ADDR_2				0x8d0
-#define     MAX_BLK_ADDR_2__VALUE			0xffff
-
-#define MIN_MAX_BANK_2				0x8e0
-#define     MIN_MAX_BANK_2__MIN_VALUE			0x0003
-#define     MIN_MAX_BANK_2__MAX_VALUE			0x000c
-
-#define PERM_SRC_ID_3				0x8f0
-#define     PERM_SRC_ID_3__SRCID				0x00ff
-#define     PERM_SRC_ID_3__DIRECT_ACCESS_ACTIVE		0x0800
-#define     PERM_SRC_ID_3__WRITE_ACTIVE			0x2000
-#define     PERM_SRC_ID_3__READ_ACTIVE			0x4000
-#define     PERM_SRC_ID_3__PARTITION_VALID		0x8000
-
-#define MIN_BLK_ADDR_3				0x900
-#define     MIN_BLK_ADDR_3__VALUE			0xffff
-
-#define MAX_BLK_ADDR_3				0x910
-#define     MAX_BLK_ADDR_3__VALUE			0xffff
-
-#define MIN_MAX_BANK_3				0x920
-#define     MIN_MAX_BANK_3__MIN_VALUE			0x0003
-#define     MIN_MAX_BANK_3__MAX_VALUE			0x000c
-
-#define PERM_SRC_ID_4				0x930
-#define     PERM_SRC_ID_4__SRCID				0x00ff
-#define     PERM_SRC_ID_4__DIRECT_ACCESS_ACTIVE		0x0800
-#define     PERM_SRC_ID_4__WRITE_ACTIVE			0x2000
-#define     PERM_SRC_ID_4__READ_ACTIVE			0x4000
-#define     PERM_SRC_ID_4__PARTITION_VALID		0x8000
-
-#define MIN_BLK_ADDR_4				0x940
-#define     MIN_BLK_ADDR_4__VALUE			0xffff
-
-#define MAX_BLK_ADDR_4				0x950
-#define     MAX_BLK_ADDR_4__VALUE			0xffff
-
-#define MIN_MAX_BANK_4				0x960
-#define     MIN_MAX_BANK_4__MIN_VALUE			0x0003
-#define     MIN_MAX_BANK_4__MAX_VALUE			0x000c
-
-#define PERM_SRC_ID_5				0x970
-#define     PERM_SRC_ID_5__SRCID				0x00ff
-#define     PERM_SRC_ID_5__DIRECT_ACCESS_ACTIVE		0x0800
-#define     PERM_SRC_ID_5__WRITE_ACTIVE			0x2000
-#define     PERM_SRC_ID_5__READ_ACTIVE			0x4000
-#define     PERM_SRC_ID_5__PARTITION_VALID		0x8000
-
-#define MIN_BLK_ADDR_5				0x980
-#define     MIN_BLK_ADDR_5__VALUE			0xffff
-
-#define MAX_BLK_ADDR_5				0x990
-#define     MAX_BLK_ADDR_5__VALUE			0xffff
-
-#define MIN_MAX_BANK_5				0x9a0
-#define     MIN_MAX_BANK_5__MIN_VALUE			0x0003
-#define     MIN_MAX_BANK_5__MAX_VALUE			0x000c
-
-#define PERM_SRC_ID_6				0x9b0
-#define     PERM_SRC_ID_6__SRCID				0x00ff
-#define     PERM_SRC_ID_6__DIRECT_ACCESS_ACTIVE		0x0800
-#define     PERM_SRC_ID_6__WRITE_ACTIVE			0x2000
-#define     PERM_SRC_ID_6__READ_ACTIVE			0x4000
-#define     PERM_SRC_ID_6__PARTITION_VALID		0x8000
-
-#define MIN_BLK_ADDR_6				0x9c0
-#define     MIN_BLK_ADDR_6__VALUE			0xffff
-
-#define MAX_BLK_ADDR_6				0x9d0
-#define     MAX_BLK_ADDR_6__VALUE			0xffff
-
-#define MIN_MAX_BANK_6				0x9e0
-#define     MIN_MAX_BANK_6__MIN_VALUE			0x0003
-#define     MIN_MAX_BANK_6__MAX_VALUE			0x000c
-
-#define PERM_SRC_ID_7				0x9f0
-#define     PERM_SRC_ID_7__SRCID				0x00ff
-#define     PERM_SRC_ID_7__DIRECT_ACCESS_ACTIVE		0x0800
-#define     PERM_SRC_ID_7__WRITE_ACTIVE			0x2000
-#define     PERM_SRC_ID_7__READ_ACTIVE			0x4000
-#define     PERM_SRC_ID_7__PARTITION_VALID		0x8000
-
-#define MIN_BLK_ADDR_7				0xa00
-#define     MIN_BLK_ADDR_7__VALUE			0xffff
-
-#define MAX_BLK_ADDR_7				0xa10
-#define     MAX_BLK_ADDR_7__VALUE			0xffff
-
-#define MIN_MAX_BANK_7				0xa20
-#define     MIN_MAX_BANK_7__MIN_VALUE			0x0003
-#define     MIN_MAX_BANK_7__MAX_VALUE			0x000c
-
-/* flash.h */
-struct device_info_tag {
-        uint16_t wDeviceMaker;
-        uint16_t wDeviceID;
-	uint8_t  bDeviceParam0;
-	uint8_t  bDeviceParam1;
-	uint8_t  bDeviceParam2;
-        uint32_t wDeviceType;
-        uint32_t wSpectraStartBlock;
-        uint32_t wSpectraEndBlock;
-        uint32_t wTotalBlocks;
-        uint16_t wPagesPerBlock;
-        uint16_t wPageSize;
-        uint16_t wPageDataSize;
-        uint16_t wPageSpareSize;
-        uint16_t wNumPageSpareFlag;
-        uint16_t wECCBytesPerSector;
-        uint32_t wBlockSize;
-        uint32_t wBlockDataSize;
-        uint32_t wDataBlockNum;
-        uint8_t bPlaneNum;
-        uint16_t wDeviceMainAreaSize;
-        uint16_t wDeviceSpareAreaSize;
-        uint16_t wDevicesConnected;
-        uint16_t wDeviceWidth;
-        uint16_t wHWRevision;
-        uint16_t wHWFeatures;
-
-        uint16_t wONFIDevFeatures;
-        uint16_t wONFIOptCommands;
-        uint16_t wONFITimingMode;
-        uint16_t wONFIPgmCacheTimingMode;
-
-        uint16_t MLCDevice;
-        uint16_t wSpareSkipBytes;
-
-        uint8_t nBitsInPageNumber;
-        uint8_t nBitsInPageDataSize;
-        uint8_t nBitsInBlockDataSize;
-};
+#define PERM_SRC_ID(__bank)	(0x830 + ((__bank) * 0x40))
+#define     PERM_SRC_ID__SRCID				0x00ff
+#define     PERM_SRC_ID__DIRECT_ACCESS_ACTIVE		0x0800
+#define     PERM_SRC_ID__WRITE_ACTIVE			0x2000
+#define     PERM_SRC_ID__READ_ACTIVE			0x4000
+#define     PERM_SRC_ID__PARTITION_VALID		0x8000
+
+#define MIN_BLK_ADDR(__bank)	(0x840 + ((__bank) * 0x40))
+#define     MIN_BLK_ADDR__VALUE				0xffff
+
+#define MAX_BLK_ADDR(__bank)	(0x850 + ((__bank) * 0x40))
+#define     MAX_BLK_ADDR__VALUE				0xffff
+
+#define MIN_MAX_BANK(__bank)	(0x860 + ((__bank) * 0x40))
+#define     MIN_MAX_BANK__MIN_VALUE			0x0003
+#define     MIN_MAX_BANK__MAX_VALUE			0x000c
+
 
 /* ffsdefs.h */
 #define CLEAR 0                 /*use this to clear a field instead of "fail"*/
@@ -676,24 +378,6 @@ struct device_info_tag {
 #define CLK_X  5
 #define CLK_MULTI 4
 
-/* ffsport.h */
-#define VERBOSE    1
-
-#define NAND_DBG_WARN  1
-#define NAND_DBG_DEBUG 2
-#define NAND_DBG_TRACE 3
-
-#ifdef VERBOSE
-#define nand_dbg_print(level, args...)                  \
-        do {                                            \
-                if (level <= nand_debug_level)          \
-                        printk(KERN_ALERT args);        \
-        } while (0)
-#else
-#define nand_dbg_print(level, args...)
-#endif
-
-
 /* spectraswconfig.h */
 #define CMD_DMA 0
 
@@ -770,30 +454,26 @@ struct device_info_tag {
 #define READ_WRITE_ENABLE_HIGH_COUNT    22
 
 #define ECC_SECTOR_SIZE     512
-#define LLD_MAX_FLASH_BANKS     4
 
-#define DENALI_BUF_SIZE		NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE
-
-struct nand_buf
-{
+struct nand_buf {
 	int head;
 	int tail;
-	uint8_t buf[DENALI_BUF_SIZE];
+	uint8_t *buf;
 	dma_addr_t dma_buf;
 };
 
 #define INTEL_CE4100	1
 #define INTEL_MRST	2
+#define DT		3
 
 struct denali_nand_info {
 	struct mtd_info mtd;
 	struct nand_chip nand;
-	struct device_info_tag dev_info;
 	int flash_bank; /* currently selected chip */
 	int status;
 	int platform;
 	struct nand_buf buf;
-	struct pci_dev *dev;
+	struct device *dev;
 	int total_used_banks;
 	uint32_t block;  /* stored for future use */
 	uint16_t page;
@@ -806,11 +486,17 @@ struct denali_nand_info {
 	uint32_t irq_status;
 	int irq_debug_array[32];
 	int idx;
+	int irq;
+
+	uint32_t devnum;	/* represent how many nands connected */
+	uint32_t fwblks; /* represent how many blocks FW used */
+	uint32_t totalblks;
+	uint32_t blksperchip;
+	uint32_t bbtskipbytes;
+	uint32_t max_banks;
 };
 
-static uint16_t  NAND_Flash_Reset(struct denali_nand_info *denali);
-static uint16_t  NAND_Read_Device_ID(struct denali_nand_info *denali);
-static void NAND_LLD_Enable_Disable_Interrupts(struct denali_nand_info *denali, uint16_t INT_ENABLE);
+extern int denali_init(struct denali_nand_info *denali);
+extern void denali_remove(struct denali_nand_info *denali);
 
 #endif /*_LLD_NAND_*/
-
diff --git a/drivers/mtd/nand/denali_dt.c b/drivers/mtd/nand/denali_dt.c
new file mode 100644
index 00000000000..35cb17f5780
--- /dev/null
+++ b/drivers/mtd/nand/denali_dt.c
@@ -0,0 +1,132 @@
+/*
+ * NAND Flash Controller Device Driver for DT
+ *
+ * Copyright © 2011, Picochip.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/slab.h>
+
+#include "denali.h"
+
+struct denali_dt {
+	struct denali_nand_info	denali;
+	struct clk		*clk;
+};
+
+static const struct of_device_id denali_nand_dt_ids[] = {
+		{ .compatible = "denali,denali-nand-dt" },
+		{ /* sentinel */ }
+	};
+
+MODULE_DEVICE_TABLE(of, denali_nand_dt_ids);
+
+static u64 denali_dma_mask;
+
+static int denali_dt_probe(struct platform_device *ofdev)
+{
+	struct resource *denali_reg, *nand_data;
+	struct denali_dt *dt;
+	struct denali_nand_info *denali;
+	int ret;
+	const struct of_device_id *of_id;
+
+	of_id = of_match_device(denali_nand_dt_ids, &ofdev->dev);
+	if (of_id) {
+		ofdev->id_entry = of_id->data;
+	} else {
+		pr_err("Failed to find the right device id.\n");
+		return -ENOMEM;
+	}
+
+	dt = devm_kzalloc(&ofdev->dev, sizeof(*dt), GFP_KERNEL);
+	if (!dt)
+		return -ENOMEM;
+	denali = &dt->denali;
+
+	denali->platform = DT;
+	denali->dev = &ofdev->dev;
+	denali->irq = platform_get_irq(ofdev, 0);
+	if (denali->irq < 0) {
+		dev_err(&ofdev->dev, "no irq defined\n");
+		return denali->irq;
+	}
+
+	denali_reg = platform_get_resource_byname(ofdev, IORESOURCE_MEM, "denali_reg");
+	denali->flash_reg = devm_ioremap_resource(&ofdev->dev, denali_reg);
+	if (IS_ERR(denali->flash_reg))
+		return PTR_ERR(denali->flash_reg);
+
+	nand_data = platform_get_resource_byname(ofdev, IORESOURCE_MEM, "nand_data");
+	denali->flash_mem = devm_ioremap_resource(&ofdev->dev, nand_data);
+	if (IS_ERR(denali->flash_mem))
+		return PTR_ERR(denali->flash_mem);
+
+	if (!of_property_read_u32(ofdev->dev.of_node,
+		"dma-mask", (u32 *)&denali_dma_mask)) {
+		denali->dev->dma_mask = &denali_dma_mask;
+	} else {
+		denali->dev->dma_mask = NULL;
+	}
+
+	dt->clk = devm_clk_get(&ofdev->dev, NULL);
+	if (IS_ERR(dt->clk)) {
+		dev_err(&ofdev->dev, "no clk available\n");
+		return PTR_ERR(dt->clk);
+	}
+	clk_prepare_enable(dt->clk);
+
+	ret = denali_init(denali);
+	if (ret)
+		goto out_disable_clk;
+
+	platform_set_drvdata(ofdev, dt);
+	return 0;
+
+out_disable_clk:
+	clk_disable_unprepare(dt->clk);
+
+	return ret;
+}
+
+static int denali_dt_remove(struct platform_device *ofdev)
+{
+	struct denali_dt *dt = platform_get_drvdata(ofdev);
+
+	denali_remove(&dt->denali);
+	clk_disable(dt->clk);
+
+	return 0;
+}
+
+static struct platform_driver denali_dt_driver = {
+	.probe		= denali_dt_probe,
+	.remove		= denali_dt_remove,
+	.driver		= {
+		.name	= "denali-nand-dt",
+		.owner	= THIS_MODULE,
+		.of_match_table	= denali_nand_dt_ids,
+	},
+};
+
+module_platform_driver(denali_dt_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jamie Iles");
+MODULE_DESCRIPTION("DT driver for Denali NAND controller");
diff --git a/drivers/mtd/nand/denali_pci.c b/drivers/mtd/nand/denali_pci.c
new file mode 100644
index 00000000000..6e2f387b823
--- /dev/null
+++ b/drivers/mtd/nand/denali_pci.c
@@ -0,0 +1,142 @@
+/*
+ * NAND Flash Controller Device Driver
+ * Copyright © 2009-2010, Intel Corporation and its suppliers.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+
+#include "denali.h"
+
+#define DENALI_NAND_NAME    "denali-nand-pci"
+
+/* List of platforms this NAND controller has be integrated into */
+static const struct pci_device_id denali_pci_ids[] = {
+	{ PCI_VDEVICE(INTEL, 0x0701), INTEL_CE4100 },
+	{ PCI_VDEVICE(INTEL, 0x0809), INTEL_MRST },
+	{ /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE(pci, denali_pci_ids);
+
+static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	int ret = -ENODEV;
+	resource_size_t csr_base, mem_base;
+	unsigned long csr_len, mem_len;
+	struct denali_nand_info *denali;
+
+	denali = kzalloc(sizeof(*denali), GFP_KERNEL);
+	if (!denali)
+		return -ENOMEM;
+
+	ret = pci_enable_device(dev);
+	if (ret) {
+		pr_err("Spectra: pci_enable_device failed.\n");
+		goto failed_alloc_memery;
+	}
+
+	if (id->driver_data == INTEL_CE4100) {
+		denali->platform = INTEL_CE4100;
+		mem_base = pci_resource_start(dev, 0);
+		mem_len = pci_resource_len(dev, 1);
+		csr_base = pci_resource_start(dev, 1);
+		csr_len = pci_resource_len(dev, 1);
+	} else {
+		denali->platform = INTEL_MRST;
+		csr_base = pci_resource_start(dev, 0);
+		csr_len = pci_resource_len(dev, 0);
+		mem_base = pci_resource_start(dev, 1);
+		mem_len = pci_resource_len(dev, 1);
+		if (!mem_len) {
+			mem_base = csr_base + csr_len;
+			mem_len = csr_len;
+		}
+	}
+
+	pci_set_master(dev);
+	denali->dev = &dev->dev;
+	denali->irq = dev->irq;
+
+	ret = pci_request_regions(dev, DENALI_NAND_NAME);
+	if (ret) {
+		pr_err("Spectra: Unable to request memory regions\n");
+		goto failed_enable_dev;
+	}
+
+	denali->flash_reg = ioremap_nocache(csr_base, csr_len);
+	if (!denali->flash_reg) {
+		pr_err("Spectra: Unable to remap memory region\n");
+		ret = -ENOMEM;
+		goto failed_req_regions;
+	}
+
+	denali->flash_mem = ioremap_nocache(mem_base, mem_len);
+	if (!denali->flash_mem) {
+		pr_err("Spectra: ioremap_nocache failed!");
+		ret = -ENOMEM;
+		goto failed_remap_reg;
+	}
+
+	ret = denali_init(denali);
+	if (ret)
+		goto failed_remap_mem;
+
+	pci_set_drvdata(dev, denali);
+
+	return 0;
+
+failed_remap_mem:
+	iounmap(denali->flash_mem);
+failed_remap_reg:
+	iounmap(denali->flash_reg);
+failed_req_regions:
+	pci_release_regions(dev);
+failed_enable_dev:
+	pci_disable_device(dev);
+failed_alloc_memery:
+	kfree(denali);
+
+	return ret;
+}
+
+/* driver exit point */
+static void denali_pci_remove(struct pci_dev *dev)
+{
+	struct denali_nand_info *denali = pci_get_drvdata(dev);
+
+	denali_remove(denali);
+	iounmap(denali->flash_reg);
+	iounmap(denali->flash_mem);
+	pci_release_regions(dev);
+	pci_disable_device(dev);
+	kfree(denali);
+}
+
+static struct pci_driver denali_pci_driver = {
+	.name = DENALI_NAND_NAME,
+	.id_table = denali_pci_ids,
+	.probe = denali_pci_probe,
+	.remove = denali_pci_remove,
+};
+
+static int denali_init_pci(void)
+{
+	return pci_register_driver(&denali_pci_driver);
+}
+module_init(denali_init_pci);
+
+static void denali_exit_pci(void)
+{
+	pci_unregister_driver(&denali_pci_driver);
+}
+module_exit(denali_exit_pci);
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index 47067bc9824..f68a7bccecd 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -29,16 +29,16 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/doc2000.h>
-#include <linux/mtd/compatmac.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/inftl.h>
+#include <linux/module.h>
 
 /* Where to look for the devices? */
 #ifndef CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS
 #define CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS 0
 #endif
 
-static unsigned long __initdata doc_locations[] = {
+static unsigned long doc_locations[] __initdata = {
 #if defined (__alpha__) || defined(__i386__) || defined(__x86_64__)
 #ifdef CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH
 	0xfffc8000, 0xfffca000, 0xfffcc000, 0xfffce000,
@@ -46,15 +46,13 @@ static unsigned long __initdata doc_locations[] = {
 	0xfffd8000, 0xfffda000, 0xfffdc000, 0xfffde000,
 	0xfffe0000, 0xfffe2000, 0xfffe4000, 0xfffe6000,
 	0xfffe8000, 0xfffea000, 0xfffec000, 0xfffee000,
-#else /*  CONFIG_MTD_DOCPROBE_HIGH */
+#else
 	0xc8000, 0xca000, 0xcc000, 0xce000,
 	0xd0000, 0xd2000, 0xd4000, 0xd6000,
 	0xd8000, 0xda000, 0xdc000, 0xde000,
 	0xe0000, 0xe2000, 0xe4000, 0xe6000,
 	0xe8000, 0xea000, 0xec000, 0xee000,
-#endif /*  CONFIG_MTD_DOCPROBE_HIGH */
-#else
-#warning Unknown architecture for DiskOnChip. No default probe locations defined
+#endif
 #endif
 	0xffffffff };
 
@@ -133,12 +131,12 @@ static struct rs_control *rs_decoder;
 
 /*
  * The HW decoder in the DoC ASIC's provides us a error syndrome,
- * which we must convert to a standard syndrom usable by the generic
+ * which we must convert to a standard syndrome usable by the generic
  * Reed-Solomon library code.
  *
  * Fabrice Bellard figured this out in the old docecc code. I added
  * some comments, improved a minor bit and converted it to make use
- * of the generic Reed-Solomon libary. tglx
+ * of the generic Reed-Solomon library. tglx
  */
 static int doc_ecc_decode(struct rs_control *rs, uint8_t *data, uint8_t *ecc)
 {
@@ -146,6 +144,7 @@ static int doc_ecc_decode(struct rs_control *rs, uint8_t *data, uint8_t *ecc)
 	uint8_t parity;
 	uint16_t ds[4], s[5], tmp, errval[8], syn[4];
 
+	memset(syn, 0, sizeof(syn));
 	/* Convert the ecc bytes into words */
 	ds[0] = ((ecc[4] & 0xff) >> 0) | ((ecc[5] & 0x03) << 8);
 	ds[1] = ((ecc[5] & 0xfc) >> 2) | ((ecc[2] & 0x0f) << 6);
@@ -153,7 +152,7 @@ static int doc_ecc_decode(struct rs_control *rs, uint8_t *data, uint8_t *ecc)
 	ds[3] = ((ecc[3] & 0xc0) >> 6) | ((ecc[0] & 0xff) << 2);
 	parity = ecc[1];
 
-	/* Initialize the syndrom buffer */
+	/* Initialize the syndrome buffer */
 	for (i = 0; i < NROOTS; i++)
 		s[i] = ds[0];
 	/*
@@ -169,9 +168,9 @@ static int doc_ecc_decode(struct rs_control *rs, uint8_t *data, uint8_t *ecc)
 			s[i] ^= rs->alpha_to[rs_modnn(rs, tmp + (FCR + i) * j)];
 	}
 
-	/* Calc s[i] = s[i] / alpha^(v + i) */
+	/* Calc syn[i] = s[i] / alpha^(v + i) */
 	for (i = 0; i < NROOTS; i++) {
-		if (syn[i])
+		if (s[i])
 			syn[i] = rs_modnn(rs, rs->index_of[s[i]] + (NN - FCR - i));
 	}
 	/* Call the decoder library */
@@ -375,19 +374,6 @@ static void doc2000_readbuf_dword(struct mtd_info *mtd, u_char *buf, int len)
 	}
 }
 
-static int doc2000_verifybuf(struct mtd_info *mtd, const u_char *buf, int len)
-{
-	struct nand_chip *this = mtd->priv;
-	struct doc_priv *doc = this->priv;
-	void __iomem *docptr = doc->virtadr;
-	int i;
-
-	for (i = 0; i < len; i++)
-		if (buf[i] != ReadDOC(docptr, 2k_CDSN_IO))
-			return -EFAULT;
-	return 0;
-}
-
 static uint16_t __init doc200x_ident_chip(struct mtd_info *mtd, int nr)
 {
 	struct nand_chip *this = mtd->priv;
@@ -400,7 +386,7 @@ static uint16_t __init doc200x_ident_chip(struct mtd_info *mtd, int nr)
 	doc200x_hwcontrol(mtd, 0, NAND_CTRL_ALE | NAND_CTRL_CHANGE);
 	doc200x_hwcontrol(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
 
-	/* We cant' use dev_ready here, but at least we wait for the
+	/* We can't use dev_ready here, but at least we wait for the
 	 * command to complete
 	 */
 	udelay(50);
@@ -525,26 +511,6 @@ static void doc2001_readbuf(struct mtd_info *mtd, u_char *buf, int len)
 	buf[i] = ReadDOC(docptr, LastDataRead);
 }
 
-static int doc2001_verifybuf(struct mtd_info *mtd, const u_char *buf, int len)
-{
-	struct nand_chip *this = mtd->priv;
-	struct doc_priv *doc = this->priv;
-	void __iomem *docptr = doc->virtadr;
-	int i;
-
-	/* Start read pipeline */
-	ReadDOC(docptr, ReadPipeInit);
-
-	for (i = 0; i < len - 1; i++)
-		if (buf[i] != ReadDOC(docptr, Mil_CDSN_IO)) {
-			ReadDOC(docptr, LastDataRead);
-			return i;
-		}
-	if (buf[i] != ReadDOC(docptr, LastDataRead))
-		return i;
-	return 0;
-}
-
 static u_char doc2001plus_read_byte(struct mtd_info *mtd)
 {
 	struct nand_chip *this = mtd->priv;
@@ -609,33 +575,6 @@ static void doc2001plus_readbuf(struct mtd_info *mtd, u_char *buf, int len)
 		printk("\n");
 }
 
-static int doc2001plus_verifybuf(struct mtd_info *mtd, const u_char *buf, int len)
-{
-	struct nand_chip *this = mtd->priv;
-	struct doc_priv *doc = this->priv;
-	void __iomem *docptr = doc->virtadr;
-	int i;
-
-	if (debug)
-		printk("verifybuf of %d bytes: ", len);
-
-	/* Start read pipeline */
-	ReadDOC(docptr, Mplus_ReadPipeInit);
-	ReadDOC(docptr, Mplus_ReadPipeInit);
-
-	for (i = 0; i < len - 2; i++)
-		if (buf[i] != ReadDOC(docptr, Mil_CDSN_IO)) {
-			ReadDOC(docptr, Mplus_LastDataRead);
-			ReadDOC(docptr, Mplus_LastDataRead);
-			return i;
-		}
-	if (buf[len - 2] != ReadDOC(docptr, Mplus_LastDataRead))
-		return len - 2;
-	if (buf[len - 1] != ReadDOC(docptr, Mplus_LastDataRead))
-		return len - 1;
-	return 0;
-}
-
 static void doc2001plus_select_chip(struct mtd_info *mtd, int chip)
 {
 	struct nand_chip *this = mtd->priv;
@@ -759,7 +698,8 @@ static void doc2001plus_command(struct mtd_info *mtd, unsigned command, int colu
 		/* Serially input address */
 		if (column != -1) {
 			/* Adjust columns for 16 bit buswidth */
-			if (this->options & NAND_BUSWIDTH_16)
+			if (this->options & NAND_BUSWIDTH_16 &&
+					!nand_opcode_8bits(command))
 				column >>= 1;
 			WriteDOC(column, docptr, Mplus_FlashAddress);
 		}
@@ -986,7 +926,7 @@ static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat,
 		dummy = ReadDOC(docptr, ECCConf);
 	}
 
-	/* Error occured ? */
+	/* Error occurred ? */
 	if (dummy & 0x80) {
 		for (i = 0; i < 6; i++) {
 			if (DoC_is_MillenniumPlus(doc))
@@ -1031,7 +971,7 @@ static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat,
 		WriteDOC(DOC_ECC_DIS, docptr, Mplus_ECCConf);
 	else
 		WriteDOC(DOC_ECC_DIS, docptr, ECCConf);
-	if (no_ecc_failures && (ret == -EBADMSG)) {
+	if (no_ecc_failures && mtd_is_eccerr(ret)) {
 		printk(KERN_ERR "suppressing ECC failure\n");
 		ret = 0;
 	}
@@ -1071,7 +1011,7 @@ static int __init find_media_headers(struct mtd_info *mtd, u_char *buf, const ch
 	size_t retlen;
 
 	for (offs = 0; offs < mtd->size; offs += mtd->erasesize) {
-		ret = mtd->read(mtd, offs, mtd->writesize, &retlen, buf);
+		ret = mtd_read(mtd, offs, mtd->writesize, &retlen, buf);
 		if (retlen != mtd->writesize)
 			continue;
 		if (ret) {
@@ -1096,7 +1036,7 @@ static int __init find_media_headers(struct mtd_info *mtd, u_char *buf, const ch
 	/* Only one mediaheader was found.  We want buf to contain a
 	   mediaheader on return, so we'll have to re-read the one we found. */
 	offs = doc->mh0_page << this->page_shift;
-	ret = mtd->read(mtd, offs, mtd->writesize, &retlen, buf);
+	ret = mtd_read(mtd, offs, mtd->writesize, &retlen, buf);
 	if (retlen != mtd->writesize) {
 		/* Insanity.  Give up. */
 		printk(KERN_ERR "Read DiskOnChip Media Header once, but can't reread it???\n");
@@ -1119,7 +1059,6 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partitio
 
 	buf = kmalloc(mtd->writesize, GFP_KERNEL);
 	if (!buf) {
-		printk(KERN_ERR "DiskOnChip mediaheader kmalloc failed!\n");
 		return 0;
 	}
 	if (!(numheaders = find_media_headers(mtd, buf, "ANAND", 1)))
@@ -1160,7 +1099,7 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partitio
 	/* NOTE: The lines below modify internal variables of the NAND and MTD
 	   layers; variables with have already been configured by nand_scan.
 	   Unfortunately, we didn't know before this point what these values
-	   should be.  Thus, this code is somewhat dependant on the exact
+	   should be.  Thus, this code is somewhat dependent on the exact
 	   implementation of the NAND layer.  */
 	if (mh->UnitSizeFactor != 0xff) {
 		this->bbt_erase_shift += (0xff - mh->UnitSizeFactor);
@@ -1227,7 +1166,6 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partiti
 
 	buf = kmalloc(mtd->writesize, GFP_KERNEL);
 	if (!buf) {
-		printk(KERN_ERR "DiskOnChip mediaheader kmalloc failed!\n");
 		return 0;
 	}
 
@@ -1360,11 +1298,9 @@ static int __init nftl_scan_bbt(struct mtd_info *mtd)
 	   At least as nand_bbt.c is currently written. */
 	if ((ret = nand_scan_bbt(mtd, NULL)))
 		return ret;
-	add_mtd_device(mtd);
-#ifdef CONFIG_MTD_PARTITIONS
+	mtd_device_register(mtd, NULL, 0);
 	if (!no_autopart)
-		add_mtd_partitions(mtd, parts, numparts);
-#endif
+		mtd_device_register(mtd, parts, numparts);
 	return 0;
 }
 
@@ -1419,11 +1355,9 @@ static int __init inftl_scan_bbt(struct mtd_info *mtd)
 	   autopartitioning, but I want to give it more thought. */
 	if (!numparts)
 		return -EIO;
-	add_mtd_device(mtd);
-#ifdef CONFIG_MTD_PARTITIONS
+	mtd_device_register(mtd, NULL, 0);
 	if (!no_autopart)
-		add_mtd_partitions(mtd, parts, numparts);
-#endif
+		mtd_device_register(mtd, parts, numparts);
 	return 0;
 }
 
@@ -1435,7 +1369,6 @@ static inline int __init doc2000_init(struct mtd_info *mtd)
 	this->read_byte = doc2000_read_byte;
 	this->write_buf = doc2000_writebuf;
 	this->read_buf = doc2000_readbuf;
-	this->verify_buf = doc2000_verifybuf;
 	this->scan_bbt = nftl_scan_bbt;
 
 	doc->CDSNControl = CDSN_CTRL_FLASH_IO | CDSN_CTRL_ECC_IO;
@@ -1452,7 +1385,6 @@ static inline int __init doc2001_init(struct mtd_info *mtd)
 	this->read_byte = doc2001_read_byte;
 	this->write_buf = doc2001_writebuf;
 	this->read_buf = doc2001_readbuf;
-	this->verify_buf = doc2001_verifybuf;
 
 	ReadDOC(doc->virtadr, ChipID);
 	ReadDOC(doc->virtadr, ChipID);
@@ -1483,7 +1415,6 @@ static inline int __init doc2001plus_init(struct mtd_info *mtd)
 	this->read_byte = doc2001plus_read_byte;
 	this->write_buf = doc2001plus_writebuf;
 	this->read_buf = doc2001plus_readbuf;
-	this->verify_buf = doc2001plus_verifybuf;
 	this->scan_bbt = inftl_scan_bbt;
 	this->cmd_ctrl = NULL;
 	this->select_chip = doc2001plus_select_chip;
@@ -1508,10 +1439,13 @@ static int __init doc_probe(unsigned long physadr)
 	int reg, len, numchips;
 	int ret = 0;
 
+	if (!request_mem_region(physadr, DOC_IOREMAP_LEN, "DiskOnChip"))
+		return -EBUSY;
 	virtadr = ioremap(physadr, DOC_IOREMAP_LEN);
 	if (!virtadr) {
 		printk(KERN_ERR "Diskonchip ioremap failed: 0x%x bytes at 0x%lx\n", DOC_IOREMAP_LEN, physadr);
-		return -EIO;
+		ret = -EIO;
+		goto error_ioremap;
 	}
 
 	/* It's not possible to cleanly detect the DiskOnChip - the
@@ -1629,7 +1563,6 @@ static int __init doc_probe(unsigned long physadr)
 	    sizeof(struct nand_chip) + sizeof(struct doc_priv) + (2 * sizeof(struct nand_bbt_descr));
 	mtd = kzalloc(len, GFP_KERNEL);
 	if (!mtd) {
-		printk(KERN_ERR "DiskOnChip kmalloc (%d bytes) failed!\n", len);
 		ret = -ENOMEM;
 		goto fail;
 	}
@@ -1656,7 +1589,8 @@ static int __init doc_probe(unsigned long physadr)
 	nand->ecc.mode		= NAND_ECC_HW_SYNDROME;
 	nand->ecc.size		= 512;
 	nand->ecc.bytes		= 6;
-	nand->options		= NAND_USE_FLASH_BBT;
+	nand->ecc.strength	= 2;
+	nand->bbt_options	= NAND_BBT_USE_FLASH;
 
 	doc->physadr		= physadr;
 	doc->virtadr		= virtadr;
@@ -1678,9 +1612,9 @@ static int __init doc_probe(unsigned long physadr)
 		/* DBB note: i believe nand_release is necessary here, as
 		   buffers may have been allocated in nand_base.  Check with
 		   Thomas. FIX ME! */
-		/* nand_release will call del_mtd_device, but we haven't yet
-		   added it.  This is handled without incident by
-		   del_mtd_device, as far as I can tell. */
+		/* nand_release will call mtd_device_unregister, but we
+		   haven't yet added it.  This is handled without incident by
+		   mtd_device_unregister, as far as I can tell. */
 		nand_release(mtd);
 		kfree(mtd);
 		goto fail;
@@ -1696,6 +1630,10 @@ static int __init doc_probe(unsigned long physadr)
 	WriteDOC(save_control, virtadr, DOCControl);
  fail:
 	iounmap(virtadr);
+
+error_ioremap:
+	release_mem_region(physadr, DOC_IOREMAP_LEN);
+
 	return ret;
 }
 
@@ -1712,6 +1650,7 @@ static void release_nanddoc(void)
 		nextmtd = doc->nextdoc;
 		nand_release(mtd);
 		iounmap(doc->virtadr);
+		release_mem_region(doc->physadr, DOC_IOREMAP_LEN);
 		kfree(mtd);
 	}
 }
diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c
new file mode 100644
index 00000000000..ce24637e14f
--- /dev/null
+++ b/drivers/mtd/nand/docg4.c
@@ -0,0 +1,1394 @@
+/*
+ *  Copyright © 2012 Mike Dunn <mikedunn@newsguy.com>
+ *
+ * mtd nand driver for M-Systems DiskOnChip G4
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Tested on the Palm Treo 680.  The G4 is also present on Toshiba Portege, Asus
+ * P526, some HTC smartphones (Wizard, Prophet, ...), O2 XDA Zinc, maybe others.
+ * Should work on these as well.  Let me know!
+ *
+ * TODO:
+ *
+ *  Mechanism for management of password-protected areas
+ *
+ *  Hamming ecc when reading oob only
+ *
+ *  According to the M-Sys documentation, this device is also available in a
+ *  "dual-die" configuration having a 256MB capacity, but no mechanism for
+ *  detecting this variant is documented.  Currently this driver assumes 128MB
+ *  capacity.
+ *
+ *  Support for multiple cascaded devices ("floors").  Not sure which gadgets
+ *  contain multiple G4s in a cascaded configuration, if any.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/export.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/bch.h>
+#include <linux/bitrev.h>
+#include <linux/jiffies.h>
+
+/*
+ * In "reliable mode" consecutive 2k pages are used in parallel (in some
+ * fashion) to store the same data.  The data can be read back from the
+ * even-numbered pages in the normal manner; odd-numbered pages will appear to
+ * contain junk.  Systems that boot from the docg4 typically write the secondary
+ * program loader (SPL) code in this mode.  The SPL is loaded by the initial
+ * program loader (IPL, stored in the docg4's 2k NOR-like region that is mapped
+ * to the reset vector address).  This module parameter enables you to use this
+ * driver to write the SPL.  When in this mode, no more than 2k of data can be
+ * written at a time, because the addresses do not increment in the normal
+ * manner, and the starting offset must be within an even-numbered 2k region;
+ * i.e., invalid starting offsets are 0x800, 0xa00, 0xc00, 0xe00, 0x1800,
+ * 0x1a00, ...  Reliable mode is a special case and should not be used unless
+ * you know what you're doing.
+ */
+static bool reliable_mode;
+module_param(reliable_mode, bool, 0);
+MODULE_PARM_DESC(reliable_mode, "pages are programmed in reliable mode");
+
+/*
+ * You'll want to ignore badblocks if you're reading a partition that contains
+ * data written by the TrueFFS library (i.e., by PalmOS, Windows, etc), since
+ * it does not use mtd nand's method for marking bad blocks (using oob area).
+ * This will also skip the check of the "page written" flag.
+ */
+static bool ignore_badblocks;
+module_param(ignore_badblocks, bool, 0);
+MODULE_PARM_DESC(ignore_badblocks, "no badblock checking performed");
+
+struct docg4_priv {
+	struct mtd_info	*mtd;
+	struct device *dev;
+	void __iomem *virtadr;
+	int status;
+	struct {
+		unsigned int command;
+		int column;
+		int page;
+	} last_command;
+	uint8_t oob_buf[16];
+	uint8_t ecc_buf[7];
+	int oob_page;
+	struct bch_control *bch;
+};
+
+/*
+ * Defines prefixed with DOCG4 are unique to the diskonchip G4.  All others are
+ * shared with other diskonchip devices (P3, G3 at least).
+ *
+ * Functions with names prefixed with docg4_ are mtd / nand interface functions
+ * (though they may also be called internally).  All others are internal.
+ */
+
+#define DOC_IOSPACE_DATA		0x0800
+
+/* register offsets */
+#define DOC_CHIPID			0x1000
+#define DOC_DEVICESELECT		0x100a
+#define DOC_ASICMODE			0x100c
+#define DOC_DATAEND			0x101e
+#define DOC_NOP				0x103e
+
+#define DOC_FLASHSEQUENCE		0x1032
+#define DOC_FLASHCOMMAND		0x1034
+#define DOC_FLASHADDRESS		0x1036
+#define DOC_FLASHCONTROL		0x1038
+#define DOC_ECCCONF0			0x1040
+#define DOC_ECCCONF1			0x1042
+#define DOC_HAMMINGPARITY		0x1046
+#define DOC_BCH_SYNDROM(idx)		(0x1048 + idx)
+
+#define DOC_ASICMODECONFIRM		0x1072
+#define DOC_CHIPID_INV			0x1074
+#define DOC_POWERMODE			0x107c
+
+#define DOCG4_MYSTERY_REG		0x1050
+
+/* apparently used only to write oob bytes 6 and 7 */
+#define DOCG4_OOB_6_7			0x1052
+
+/* DOC_FLASHSEQUENCE register commands */
+#define DOC_SEQ_RESET			0x00
+#define DOCG4_SEQ_PAGE_READ		0x03
+#define DOCG4_SEQ_FLUSH			0x29
+#define DOCG4_SEQ_PAGEWRITE		0x16
+#define DOCG4_SEQ_PAGEPROG		0x1e
+#define DOCG4_SEQ_BLOCKERASE		0x24
+#define DOCG4_SEQ_SETMODE		0x45
+
+/* DOC_FLASHCOMMAND register commands */
+#define DOCG4_CMD_PAGE_READ             0x00
+#define DOC_CMD_ERASECYCLE2		0xd0
+#define DOCG4_CMD_FLUSH                 0x70
+#define DOCG4_CMD_READ2                 0x30
+#define DOC_CMD_PROG_BLOCK_ADDR		0x60
+#define DOCG4_CMD_PAGEWRITE		0x80
+#define DOC_CMD_PROG_CYCLE2		0x10
+#define DOCG4_CMD_FAST_MODE		0xa3 /* functionality guessed */
+#define DOC_CMD_RELIABLE_MODE		0x22
+#define DOC_CMD_RESET			0xff
+
+/* DOC_POWERMODE register bits */
+#define DOC_POWERDOWN_READY		0x80
+
+/* DOC_FLASHCONTROL register bits */
+#define DOC_CTRL_CE			0x10
+#define DOC_CTRL_UNKNOWN		0x40
+#define DOC_CTRL_FLASHREADY		0x01
+
+/* DOC_ECCCONF0 register bits */
+#define DOC_ECCCONF0_READ_MODE		0x8000
+#define DOC_ECCCONF0_UNKNOWN		0x2000
+#define DOC_ECCCONF0_ECC_ENABLE	        0x1000
+#define DOC_ECCCONF0_DATA_BYTES_MASK	0x07ff
+
+/* DOC_ECCCONF1 register bits */
+#define DOC_ECCCONF1_BCH_SYNDROM_ERR	0x80
+#define DOC_ECCCONF1_ECC_ENABLE         0x07
+#define DOC_ECCCONF1_PAGE_IS_WRITTEN	0x20
+
+/* DOC_ASICMODE register bits */
+#define DOC_ASICMODE_RESET		0x00
+#define DOC_ASICMODE_NORMAL		0x01
+#define DOC_ASICMODE_POWERDOWN		0x02
+#define DOC_ASICMODE_MDWREN		0x04
+#define DOC_ASICMODE_BDETCT_RESET	0x08
+#define DOC_ASICMODE_RSTIN_RESET	0x10
+#define DOC_ASICMODE_RAM_WE		0x20
+
+/* good status values read after read/write/erase operations */
+#define DOCG4_PROGSTATUS_GOOD          0x51
+#define DOCG4_PROGSTATUS_GOOD_2        0xe0
+
+/*
+ * On read operations (page and oob-only), the first byte read from I/O reg is a
+ * status.  On error, it reads 0x73; otherwise, it reads either 0x71 (first read
+ * after reset only) or 0x51, so bit 1 is presumed to be an error indicator.
+ */
+#define DOCG4_READ_ERROR           0x02 /* bit 1 indicates read error */
+
+/* anatomy of the device */
+#define DOCG4_CHIP_SIZE        0x8000000
+#define DOCG4_PAGE_SIZE        0x200
+#define DOCG4_PAGES_PER_BLOCK  0x200
+#define DOCG4_BLOCK_SIZE       (DOCG4_PAGES_PER_BLOCK * DOCG4_PAGE_SIZE)
+#define DOCG4_NUMBLOCKS        (DOCG4_CHIP_SIZE / DOCG4_BLOCK_SIZE)
+#define DOCG4_OOB_SIZE         0x10
+#define DOCG4_CHIP_SHIFT       27    /* log_2(DOCG4_CHIP_SIZE) */
+#define DOCG4_PAGE_SHIFT       9     /* log_2(DOCG4_PAGE_SIZE) */
+#define DOCG4_ERASE_SHIFT      18    /* log_2(DOCG4_BLOCK_SIZE) */
+
+/* all but the last byte is included in ecc calculation */
+#define DOCG4_BCH_SIZE         (DOCG4_PAGE_SIZE + DOCG4_OOB_SIZE - 1)
+
+#define DOCG4_USERDATA_LEN     520 /* 512 byte page plus 8 oob avail to user */
+
+/* expected values from the ID registers */
+#define DOCG4_IDREG1_VALUE     0x0400
+#define DOCG4_IDREG2_VALUE     0xfbff
+
+/* primitive polynomial used to build the Galois field used by hw ecc gen */
+#define DOCG4_PRIMITIVE_POLY   0x4443
+
+#define DOCG4_M                14  /* Galois field is of order 2^14 */
+#define DOCG4_T                4   /* BCH alg corrects up to 4 bit errors */
+
+#define DOCG4_FACTORY_BBT_PAGE 16 /* page where read-only factory bbt lives */
+#define DOCG4_REDUNDANT_BBT_PAGE 24 /* page where redundant factory bbt lives */
+
+/*
+ * Bytes 0, 1 are used as badblock marker.
+ * Bytes 2 - 6 are available to the user.
+ * Byte 7 is hamming ecc for first 7 oob bytes only.
+ * Bytes 8 - 14 are hw-generated ecc covering entire page + oob bytes 0 - 14.
+ * Byte 15 (the last) is used by the driver as a "page written" flag.
+ */
+static struct nand_ecclayout docg4_oobinfo = {
+	.eccbytes = 9,
+	.eccpos = {7, 8, 9, 10, 11, 12, 13, 14, 15},
+	.oobavail = 5,
+	.oobfree = { {.offset = 2, .length = 5} }
+};
+
+/*
+ * The device has a nop register which M-Sys claims is for the purpose of
+ * inserting precise delays.  But beware; at least some operations fail if the
+ * nop writes are replaced with a generic delay!
+ */
+static inline void write_nop(void __iomem *docptr)
+{
+	writew(0, docptr + DOC_NOP);
+}
+
+static void docg4_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+	int i;
+	struct nand_chip *nand = mtd->priv;
+	uint16_t *p = (uint16_t *) buf;
+	len >>= 1;
+
+	for (i = 0; i < len; i++)
+		p[i] = readw(nand->IO_ADDR_R);
+}
+
+static void docg4_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+	int i;
+	struct nand_chip *nand = mtd->priv;
+	uint16_t *p = (uint16_t *) buf;
+	len >>= 1;
+
+	for (i = 0; i < len; i++)
+		writew(p[i], nand->IO_ADDR_W);
+}
+
+static int poll_status(struct docg4_priv *doc)
+{
+	/*
+	 * Busy-wait for the FLASHREADY bit to be set in the FLASHCONTROL
+	 * register.  Operations known to take a long time (e.g., block erase)
+	 * should sleep for a while before calling this.
+	 */
+
+	uint16_t flash_status;
+	unsigned long timeo;
+	void __iomem *docptr = doc->virtadr;
+
+	dev_dbg(doc->dev, "%s...\n", __func__);
+
+	/* hardware quirk requires reading twice initially */
+	flash_status = readw(docptr + DOC_FLASHCONTROL);
+
+	timeo = jiffies + msecs_to_jiffies(200); /* generous timeout */
+	do {
+		cpu_relax();
+		flash_status = readb(docptr + DOC_FLASHCONTROL);
+	} while (!(flash_status & DOC_CTRL_FLASHREADY) &&
+		 time_before(jiffies, timeo));
+
+	if (unlikely(!(flash_status & DOC_CTRL_FLASHREADY))) {
+		dev_err(doc->dev, "%s: timed out!\n", __func__);
+		return NAND_STATUS_FAIL;
+	}
+
+	return 0;
+}
+
+
+static int docg4_wait(struct mtd_info *mtd, struct nand_chip *nand)
+{
+
+	struct docg4_priv *doc = nand->priv;
+	int status = NAND_STATUS_WP;       /* inverse logic?? */
+	dev_dbg(doc->dev, "%s...\n", __func__);
+
+	/* report any previously unreported error */
+	if (doc->status) {
+		status |= doc->status;
+		doc->status = 0;
+		return status;
+	}
+
+	status |= poll_status(doc);
+	return status;
+}
+
+static void docg4_select_chip(struct mtd_info *mtd, int chip)
+{
+	/*
+	 * Select among multiple cascaded chips ("floors").  Multiple floors are
+	 * not yet supported, so the only valid non-negative value is 0.
+	 */
+	struct nand_chip *nand = mtd->priv;
+	struct docg4_priv *doc = nand->priv;
+	void __iomem *docptr = doc->virtadr;
+
+	dev_dbg(doc->dev, "%s: chip %d\n", __func__, chip);
+
+	if (chip < 0)
+		return;		/* deselected */
+
+	if (chip > 0)
+		dev_warn(doc->dev, "multiple floors currently unsupported\n");
+
+	writew(0, docptr + DOC_DEVICESELECT);
+}
+
+static void reset(struct mtd_info *mtd)
+{
+	/* full device reset */
+
+	struct nand_chip *nand = mtd->priv;
+	struct docg4_priv *doc = nand->priv;
+	void __iomem *docptr = doc->virtadr;
+
+	writew(DOC_ASICMODE_RESET | DOC_ASICMODE_MDWREN,
+	       docptr + DOC_ASICMODE);
+	writew(~(DOC_ASICMODE_RESET | DOC_ASICMODE_MDWREN),
+	       docptr + DOC_ASICMODECONFIRM);
+	write_nop(docptr);
+
+	writew(DOC_ASICMODE_NORMAL | DOC_ASICMODE_MDWREN,
+	       docptr + DOC_ASICMODE);
+	writew(~(DOC_ASICMODE_NORMAL | DOC_ASICMODE_MDWREN),
+	       docptr + DOC_ASICMODECONFIRM);
+
+	writew(DOC_ECCCONF1_ECC_ENABLE, docptr + DOC_ECCCONF1);
+
+	poll_status(doc);
+}
+
+static void read_hw_ecc(void __iomem *docptr, uint8_t *ecc_buf)
+{
+	/* read the 7 hw-generated ecc bytes */
+
+	int i;
+	for (i = 0; i < 7; i++) { /* hw quirk; read twice */
+		ecc_buf[i] = readb(docptr + DOC_BCH_SYNDROM(i));
+		ecc_buf[i] = readb(docptr + DOC_BCH_SYNDROM(i));
+	}
+}
+
+static int correct_data(struct mtd_info *mtd, uint8_t *buf, int page)
+{
+	/*
+	 * Called after a page read when hardware reports bitflips.
+	 * Up to four bitflips can be corrected.
+	 */
+
+	struct nand_chip *nand = mtd->priv;
+	struct docg4_priv *doc = nand->priv;
+	void __iomem *docptr = doc->virtadr;
+	int i, numerrs, errpos[4];
+	const uint8_t blank_read_hwecc[8] = {
+		0xcf, 0x72, 0xfc, 0x1b, 0xa9, 0xc7, 0xb9, 0 };
+
+	read_hw_ecc(docptr, doc->ecc_buf); /* read 7 hw-generated ecc bytes */
+
+	/* check if read error is due to a blank page */
+	if (!memcmp(doc->ecc_buf, blank_read_hwecc, 7))
+		return 0;	/* yes */
+
+	/* skip additional check of "written flag" if ignore_badblocks */
+	if (ignore_badblocks == false) {
+
+		/*
+		 * If the hw ecc bytes are not those of a blank page, there's
+		 * still a chance that the page is blank, but was read with
+		 * errors.  Check the "written flag" in last oob byte, which
+		 * is set to zero when a page is written.  If more than half
+		 * the bits are set, assume a blank page.  Unfortunately, the
+		 * bit flips(s) are not reported in stats.
+		 */
+
+		if (nand->oob_poi[15]) {
+			int bit, numsetbits = 0;
+			unsigned long written_flag = nand->oob_poi[15];
+			for_each_set_bit(bit, &written_flag, 8)
+				numsetbits++;
+			if (numsetbits > 4) { /* assume blank */
+				dev_warn(doc->dev,
+					 "error(s) in blank page "
+					 "at offset %08x\n",
+					 page * DOCG4_PAGE_SIZE);
+				return 0;
+			}
+		}
+	}
+
+	/*
+	 * The hardware ecc unit produces oob_ecc ^ calc_ecc.  The kernel's bch
+	 * algorithm is used to decode this.  However the hw operates on page
+	 * data in a bit order that is the reverse of that of the bch alg,
+	 * requiring that the bits be reversed on the result.  Thanks to Ivan
+	 * Djelic for his analysis!
+	 */
+	for (i = 0; i < 7; i++)
+		doc->ecc_buf[i] = bitrev8(doc->ecc_buf[i]);
+
+	numerrs = decode_bch(doc->bch, NULL, DOCG4_USERDATA_LEN, NULL,
+			     doc->ecc_buf, NULL, errpos);
+
+	if (numerrs == -EBADMSG) {
+		dev_warn(doc->dev, "uncorrectable errors at offset %08x\n",
+			 page * DOCG4_PAGE_SIZE);
+		return -EBADMSG;
+	}
+
+	BUG_ON(numerrs < 0);	/* -EINVAL, or anything other than -EBADMSG */
+
+	/* undo last step in BCH alg (modulo mirroring not needed) */
+	for (i = 0; i < numerrs; i++)
+		errpos[i] = (errpos[i] & ~7)|(7-(errpos[i] & 7));
+
+	/* fix the errors */
+	for (i = 0; i < numerrs; i++) {
+
+		/* ignore if error within oob ecc bytes */
+		if (errpos[i] > DOCG4_USERDATA_LEN * 8)
+			continue;
+
+		/* if error within oob area preceeding ecc bytes... */
+		if (errpos[i] > DOCG4_PAGE_SIZE * 8)
+			change_bit(errpos[i] - DOCG4_PAGE_SIZE * 8,
+				   (unsigned long *)nand->oob_poi);
+
+		else    /* error in page data */
+			change_bit(errpos[i], (unsigned long *)buf);
+	}
+
+	dev_notice(doc->dev, "%d error(s) corrected at offset %08x\n",
+		   numerrs, page * DOCG4_PAGE_SIZE);
+
+	return numerrs;
+}
+
+static uint8_t docg4_read_byte(struct mtd_info *mtd)
+{
+	struct nand_chip *nand = mtd->priv;
+	struct docg4_priv *doc = nand->priv;
+
+	dev_dbg(doc->dev, "%s\n", __func__);
+
+	if (doc->last_command.command == NAND_CMD_STATUS) {
+		int status;
+
+		/*
+		 * Previous nand command was status request, so nand
+		 * infrastructure code expects to read the status here.  If an
+		 * error occurred in a previous operation, report it.
+		 */
+		doc->last_command.command = 0;
+
+		if (doc->status) {
+			status = doc->status;
+			doc->status = 0;
+		}
+
+		/* why is NAND_STATUS_WP inverse logic?? */
+		else
+			status = NAND_STATUS_WP | NAND_STATUS_READY;
+
+		return status;
+	}
+
+	dev_warn(doc->dev, "unexpected call to read_byte()\n");
+
+	return 0;
+}
+
+static void write_addr(struct docg4_priv *doc, uint32_t docg4_addr)
+{
+	/* write the four address bytes packed in docg4_addr to the device */
+
+	void __iomem *docptr = doc->virtadr;
+	writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS);
+	docg4_addr >>= 8;
+	writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS);
+	docg4_addr >>= 8;
+	writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS);
+	docg4_addr >>= 8;
+	writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS);
+}
+
+static int read_progstatus(struct docg4_priv *doc)
+{
+	/*
+	 * This apparently checks the status of programming.  Done after an
+	 * erasure, and after page data is written.  On error, the status is
+	 * saved, to be later retrieved by the nand infrastructure code.
+	 */
+	void __iomem *docptr = doc->virtadr;
+
+	/* status is read from the I/O reg */
+	uint16_t status1 = readw(docptr + DOC_IOSPACE_DATA);
+	uint16_t status2 = readw(docptr + DOC_IOSPACE_DATA);
+	uint16_t status3 = readw(docptr + DOCG4_MYSTERY_REG);
+
+	dev_dbg(doc->dev, "docg4: %s: %02x %02x %02x\n",
+	      __func__, status1, status2, status3);
+
+	if (status1 != DOCG4_PROGSTATUS_GOOD
+	    || status2 != DOCG4_PROGSTATUS_GOOD_2
+	    || status3 != DOCG4_PROGSTATUS_GOOD_2) {
+		doc->status = NAND_STATUS_FAIL;
+		dev_warn(doc->dev, "read_progstatus failed: "
+			 "%02x, %02x, %02x\n", status1, status2, status3);
+		return -EIO;
+	}
+	return 0;
+}
+
+static int pageprog(struct mtd_info *mtd)
+{
+	/*
+	 * Final step in writing a page.  Writes the contents of its
+	 * internal buffer out to the flash array, or some such.
+	 */
+
+	struct nand_chip *nand = mtd->priv;
+	struct docg4_priv *doc = nand->priv;
+	void __iomem *docptr = doc->virtadr;
+	int retval = 0;
+
+	dev_dbg(doc->dev, "docg4: %s\n", __func__);
+
+	writew(DOCG4_SEQ_PAGEPROG, docptr + DOC_FLASHSEQUENCE);
+	writew(DOC_CMD_PROG_CYCLE2, docptr + DOC_FLASHCOMMAND);
+	write_nop(docptr);
+	write_nop(docptr);
+
+	/* Just busy-wait; usleep_range() slows things down noticeably. */
+	poll_status(doc);
+
+	writew(DOCG4_SEQ_FLUSH, docptr + DOC_FLASHSEQUENCE);
+	writew(DOCG4_CMD_FLUSH, docptr + DOC_FLASHCOMMAND);
+	writew(DOC_ECCCONF0_READ_MODE | 4, docptr + DOC_ECCCONF0);
+	write_nop(docptr);
+	write_nop(docptr);
+	write_nop(docptr);
+	write_nop(docptr);
+	write_nop(docptr);
+
+	retval = read_progstatus(doc);
+	writew(0, docptr + DOC_DATAEND);
+	write_nop(docptr);
+	poll_status(doc);
+	write_nop(docptr);
+
+	return retval;
+}
+
+static void sequence_reset(struct mtd_info *mtd)
+{
+	/* common starting sequence for all operations */
+
+	struct nand_chip *nand = mtd->priv;
+	struct docg4_priv *doc = nand->priv;
+	void __iomem *docptr = doc->virtadr;
+
+	writew(DOC_CTRL_UNKNOWN | DOC_CTRL_CE, docptr + DOC_FLASHCONTROL);
+	writew(DOC_SEQ_RESET, docptr + DOC_FLASHSEQUENCE);
+	writew(DOC_CMD_RESET, docptr + DOC_FLASHCOMMAND);
+	write_nop(docptr);
+	write_nop(docptr);
+	poll_status(doc);
+	write_nop(docptr);
+}
+
+static void read_page_prologue(struct mtd_info *mtd, uint32_t docg4_addr)
+{
+	/* first step in reading a page */
+
+	struct nand_chip *nand = mtd->priv;
+	struct docg4_priv *doc = nand->priv;
+	void __iomem *docptr = doc->virtadr;
+
+	dev_dbg(doc->dev,
+	      "docg4: %s: g4 page %08x\n", __func__, docg4_addr);
+
+	sequence_reset(mtd);
+
+	writew(DOCG4_SEQ_PAGE_READ, docptr + DOC_FLASHSEQUENCE);
+	writew(DOCG4_CMD_PAGE_READ, docptr + DOC_FLASHCOMMAND);
+	write_nop(docptr);
+
+	write_addr(doc, docg4_addr);
+
+	write_nop(docptr);
+	writew(DOCG4_CMD_READ2, docptr + DOC_FLASHCOMMAND);
+	write_nop(docptr);
+	write_nop(docptr);
+
+	poll_status(doc);
+}
+
+static void write_page_prologue(struct mtd_info *mtd, uint32_t docg4_addr)
+{
+	/* first step in writing a page */
+
+	struct nand_chip *nand = mtd->priv;
+	struct docg4_priv *doc = nand->priv;
+	void __iomem *docptr = doc->virtadr;
+
+	dev_dbg(doc->dev,
+	      "docg4: %s: g4 addr: %x\n", __func__, docg4_addr);
+	sequence_reset(mtd);
+
+	if (unlikely(reliable_mode)) {
+		writew(DOCG4_SEQ_SETMODE, docptr + DOC_FLASHSEQUENCE);
+		writew(DOCG4_CMD_FAST_MODE, docptr + DOC_FLASHCOMMAND);
+		writew(DOC_CMD_RELIABLE_MODE, docptr + DOC_FLASHCOMMAND);
+		write_nop(docptr);
+	}
+
+	writew(DOCG4_SEQ_PAGEWRITE, docptr + DOC_FLASHSEQUENCE);
+	writew(DOCG4_CMD_PAGEWRITE, docptr + DOC_FLASHCOMMAND);
+	write_nop(docptr);
+	write_addr(doc, docg4_addr);
+	write_nop(docptr);
+	write_nop(docptr);
+	poll_status(doc);
+}
+
+static uint32_t mtd_to_docg4_address(int page, int column)
+{
+	/*
+	 * Convert mtd address to format used by the device, 32 bit packed.
+	 *
+	 * Some notes on G4 addressing... The M-Sys documentation on this device
+	 * claims that pages are 2K in length, and indeed, the format of the
+	 * address used by the device reflects that.  But within each page are
+	 * four 512 byte "sub-pages", each with its own oob data that is
+	 * read/written immediately after the 512 bytes of page data.  This oob
+	 * data contains the ecc bytes for the preceeding 512 bytes.
+	 *
+	 * Rather than tell the mtd nand infrastructure that page size is 2k,
+	 * with four sub-pages each, we engage in a little subterfuge and tell
+	 * the infrastructure code that pages are 512 bytes in size.  This is
+	 * done because during the course of reverse-engineering the device, I
+	 * never observed an instance where an entire 2K "page" was read or
+	 * written as a unit.  Each "sub-page" is always addressed individually,
+	 * its data read/written, and ecc handled before the next "sub-page" is
+	 * addressed.
+	 *
+	 * This requires us to convert addresses passed by the mtd nand
+	 * infrastructure code to those used by the device.
+	 *
+	 * The address that is written to the device consists of four bytes: the
+	 * first two are the 2k page number, and the second is the index into
+	 * the page.  The index is in terms of 16-bit half-words and includes
+	 * the preceeding oob data, so e.g., the index into the second
+	 * "sub-page" is 0x108, and the full device address of the start of mtd
+	 * page 0x201 is 0x00800108.
+	 */
+	int g4_page = page / 4;	                      /* device's 2K page */
+	int g4_index = (page % 4) * 0x108 + column/2; /* offset into page */
+	return (g4_page << 16) | g4_index;	      /* pack */
+}
+
+static void docg4_command(struct mtd_info *mtd, unsigned command, int column,
+			  int page_addr)
+{
+	/* handle standard nand commands */
+
+	struct nand_chip *nand = mtd->priv;
+	struct docg4_priv *doc = nand->priv;
+	uint32_t g4_addr = mtd_to_docg4_address(page_addr, column);
+
+	dev_dbg(doc->dev, "%s %x, page_addr=%x, column=%x\n",
+	      __func__, command, page_addr, column);
+
+	/*
+	 * Save the command and its arguments.  This enables emulation of
+	 * standard flash devices, and also some optimizations.
+	 */
+	doc->last_command.command = command;
+	doc->last_command.column = column;
+	doc->last_command.page = page_addr;
+
+	switch (command) {
+
+	case NAND_CMD_RESET:
+		reset(mtd);
+		break;
+
+	case NAND_CMD_READ0:
+		read_page_prologue(mtd, g4_addr);
+		break;
+
+	case NAND_CMD_STATUS:
+		/* next call to read_byte() will expect a status */
+		break;
+
+	case NAND_CMD_SEQIN:
+		if (unlikely(reliable_mode)) {
+			uint16_t g4_page = g4_addr >> 16;
+
+			/* writes to odd-numbered 2k pages are invalid */
+			if (g4_page & 0x01)
+				dev_warn(doc->dev,
+					 "invalid reliable mode address\n");
+		}
+
+		write_page_prologue(mtd, g4_addr);
+
+		/* hack for deferred write of oob bytes */
+		if (doc->oob_page == page_addr)
+			memcpy(nand->oob_poi, doc->oob_buf, 16);
+		break;
+
+	case NAND_CMD_PAGEPROG:
+		pageprog(mtd);
+		break;
+
+	/* we don't expect these, based on review of nand_base.c */
+	case NAND_CMD_READOOB:
+	case NAND_CMD_READID:
+	case NAND_CMD_ERASE1:
+	case NAND_CMD_ERASE2:
+		dev_warn(doc->dev, "docg4_command: "
+			 "unexpected nand command 0x%x\n", command);
+		break;
+
+	}
+}
+
+static int read_page(struct mtd_info *mtd, struct nand_chip *nand,
+		     uint8_t *buf, int page, bool use_ecc)
+{
+	struct docg4_priv *doc = nand->priv;
+	void __iomem *docptr = doc->virtadr;
+	uint16_t status, edc_err, *buf16;
+	int bits_corrected = 0;
+
+	dev_dbg(doc->dev, "%s: page %08x\n", __func__, page);
+
+	writew(DOC_ECCCONF0_READ_MODE |
+	       DOC_ECCCONF0_ECC_ENABLE |
+	       DOC_ECCCONF0_UNKNOWN |
+	       DOCG4_BCH_SIZE,
+	       docptr + DOC_ECCCONF0);
+	write_nop(docptr);
+	write_nop(docptr);
+	write_nop(docptr);
+	write_nop(docptr);
+	write_nop(docptr);
+
+	/* the 1st byte from the I/O reg is a status; the rest is page data */
+	status = readw(docptr + DOC_IOSPACE_DATA);
+	if (status & DOCG4_READ_ERROR) {
+		dev_err(doc->dev,
+			"docg4_read_page: bad status: 0x%02x\n", status);
+		writew(0, docptr + DOC_DATAEND);
+		return -EIO;
+	}
+
+	dev_dbg(doc->dev, "%s: status = 0x%x\n", __func__, status);
+
+	docg4_read_buf(mtd, buf, DOCG4_PAGE_SIZE); /* read the page data */
+
+	/* this device always reads oob after page data */
+	/* first 14 oob bytes read from I/O reg */
+	docg4_read_buf(mtd, nand->oob_poi, 14);
+
+	/* last 2 read from another reg */
+	buf16 = (uint16_t *)(nand->oob_poi + 14);
+	*buf16 = readw(docptr + DOCG4_MYSTERY_REG);
+
+	write_nop(docptr);
+
+	if (likely(use_ecc == true)) {
+
+		/* read the register that tells us if bitflip(s) detected  */
+		edc_err = readw(docptr + DOC_ECCCONF1);
+		edc_err = readw(docptr + DOC_ECCCONF1);
+		dev_dbg(doc->dev, "%s: edc_err = 0x%02x\n", __func__, edc_err);
+
+		/* If bitflips are reported, attempt to correct with ecc */
+		if (edc_err & DOC_ECCCONF1_BCH_SYNDROM_ERR) {
+			bits_corrected = correct_data(mtd, buf, page);
+			if (bits_corrected == -EBADMSG)
+				mtd->ecc_stats.failed++;
+			else
+				mtd->ecc_stats.corrected += bits_corrected;
+		}
+	}
+
+	writew(0, docptr + DOC_DATAEND);
+	if (bits_corrected == -EBADMSG)	  /* uncorrectable errors */
+		return 0;
+	return bits_corrected;
+}
+
+
+static int docg4_read_page_raw(struct mtd_info *mtd, struct nand_chip *nand,
+			       uint8_t *buf, int oob_required, int page)
+{
+	return read_page(mtd, nand, buf, page, false);
+}
+
+static int docg4_read_page(struct mtd_info *mtd, struct nand_chip *nand,
+			   uint8_t *buf, int oob_required, int page)
+{
+	return read_page(mtd, nand, buf, page, true);
+}
+
+static int docg4_read_oob(struct mtd_info *mtd, struct nand_chip *nand,
+			  int page)
+{
+	struct docg4_priv *doc = nand->priv;
+	void __iomem *docptr = doc->virtadr;
+	uint16_t status;
+
+	dev_dbg(doc->dev, "%s: page %x\n", __func__, page);
+
+	docg4_command(mtd, NAND_CMD_READ0, nand->ecc.size, page);
+
+	writew(DOC_ECCCONF0_READ_MODE | DOCG4_OOB_SIZE, docptr + DOC_ECCCONF0);
+	write_nop(docptr);
+	write_nop(docptr);
+	write_nop(docptr);
+	write_nop(docptr);
+	write_nop(docptr);
+
+	/* the 1st byte from the I/O reg is a status; the rest is oob data */
+	status = readw(docptr + DOC_IOSPACE_DATA);
+	if (status & DOCG4_READ_ERROR) {
+		dev_warn(doc->dev,
+			 "docg4_read_oob failed: status = 0x%02x\n", status);
+		return -EIO;
+	}
+
+	dev_dbg(doc->dev, "%s: status = 0x%x\n", __func__, status);
+
+	docg4_read_buf(mtd, nand->oob_poi, 16);
+
+	write_nop(docptr);
+	write_nop(docptr);
+	write_nop(docptr);
+	writew(0, docptr + DOC_DATAEND);
+	write_nop(docptr);
+
+	return 0;
+}
+
+static int docg4_erase_block(struct mtd_info *mtd, int page)
+{
+	struct nand_chip *nand = mtd->priv;
+	struct docg4_priv *doc = nand->priv;
+	void __iomem *docptr = doc->virtadr;
+	uint16_t g4_page;
+
+	dev_dbg(doc->dev, "%s: page %04x\n", __func__, page);
+
+	sequence_reset(mtd);
+
+	writew(DOCG4_SEQ_BLOCKERASE, docptr + DOC_FLASHSEQUENCE);
+	writew(DOC_CMD_PROG_BLOCK_ADDR, docptr + DOC_FLASHCOMMAND);
+	write_nop(docptr);
+
+	/* only 2 bytes of address are written to specify erase block */
+	g4_page = (uint16_t)(page / 4);  /* to g4's 2k page addressing */
+	writeb(g4_page & 0xff, docptr + DOC_FLASHADDRESS);
+	g4_page >>= 8;
+	writeb(g4_page & 0xff, docptr + DOC_FLASHADDRESS);
+	write_nop(docptr);
+
+	/* start the erasure */
+	writew(DOC_CMD_ERASECYCLE2, docptr + DOC_FLASHCOMMAND);
+	write_nop(docptr);
+	write_nop(docptr);
+
+	usleep_range(500, 1000); /* erasure is long; take a snooze */
+	poll_status(doc);
+	writew(DOCG4_SEQ_FLUSH, docptr + DOC_FLASHSEQUENCE);
+	writew(DOCG4_CMD_FLUSH, docptr + DOC_FLASHCOMMAND);
+	writew(DOC_ECCCONF0_READ_MODE | 4, docptr + DOC_ECCCONF0);
+	write_nop(docptr);
+	write_nop(docptr);
+	write_nop(docptr);
+	write_nop(docptr);
+	write_nop(docptr);
+
+	read_progstatus(doc);
+
+	writew(0, docptr + DOC_DATAEND);
+	write_nop(docptr);
+	poll_status(doc);
+	write_nop(docptr);
+
+	return nand->waitfunc(mtd, nand);
+}
+
+static int write_page(struct mtd_info *mtd, struct nand_chip *nand,
+		       const uint8_t *buf, bool use_ecc)
+{
+	struct docg4_priv *doc = nand->priv;
+	void __iomem *docptr = doc->virtadr;
+	uint8_t ecc_buf[8];
+
+	dev_dbg(doc->dev, "%s...\n", __func__);
+
+	writew(DOC_ECCCONF0_ECC_ENABLE |
+	       DOC_ECCCONF0_UNKNOWN |
+	       DOCG4_BCH_SIZE,
+	       docptr + DOC_ECCCONF0);
+	write_nop(docptr);
+
+	/* write the page data */
+	docg4_write_buf16(mtd, buf, DOCG4_PAGE_SIZE);
+
+	/* oob bytes 0 through 5 are written to I/O reg */
+	docg4_write_buf16(mtd, nand->oob_poi, 6);
+
+	/* oob byte 6 written to a separate reg */
+	writew(nand->oob_poi[6], docptr + DOCG4_OOB_6_7);
+
+	write_nop(docptr);
+	write_nop(docptr);
+
+	/* write hw-generated ecc bytes to oob */
+	if (likely(use_ecc == true)) {
+		/* oob byte 7 is hamming code */
+		uint8_t hamming = readb(docptr + DOC_HAMMINGPARITY);
+		hamming = readb(docptr + DOC_HAMMINGPARITY); /* 2nd read */
+		writew(hamming, docptr + DOCG4_OOB_6_7);
+		write_nop(docptr);
+
+		/* read the 7 bch bytes from ecc regs */
+		read_hw_ecc(docptr, ecc_buf);
+		ecc_buf[7] = 0;         /* clear the "page written" flag */
+	}
+
+	/* write user-supplied bytes to oob */
+	else {
+		writew(nand->oob_poi[7], docptr + DOCG4_OOB_6_7);
+		write_nop(docptr);
+		memcpy(ecc_buf, &nand->oob_poi[8], 8);
+	}
+
+	docg4_write_buf16(mtd, ecc_buf, 8);
+	write_nop(docptr);
+	write_nop(docptr);
+	writew(0, docptr + DOC_DATAEND);
+	write_nop(docptr);
+
+	return 0;
+}
+
+static int docg4_write_page_raw(struct mtd_info *mtd, struct nand_chip *nand,
+				 const uint8_t *buf, int oob_required)
+{
+	return write_page(mtd, nand, buf, false);
+}
+
+static int docg4_write_page(struct mtd_info *mtd, struct nand_chip *nand,
+			     const uint8_t *buf, int oob_required)
+{
+	return write_page(mtd, nand, buf, true);
+}
+
+static int docg4_write_oob(struct mtd_info *mtd, struct nand_chip *nand,
+			   int page)
+{
+	/*
+	 * Writing oob-only is not really supported, because MLC nand must write
+	 * oob bytes at the same time as page data.  Nonetheless, we save the
+	 * oob buffer contents here, and then write it along with the page data
+	 * if the same page is subsequently written.  This allows user space
+	 * utilities that write the oob data prior to the page data to work
+	 * (e.g., nandwrite).  The disdvantage is that, if the intention was to
+	 * write oob only, the operation is quietly ignored.  Also, oob can get
+	 * corrupted if two concurrent processes are running nandwrite.
+	 */
+
+	/* note that bytes 7..14 are hw generated hamming/ecc and overwritten */
+	struct docg4_priv *doc = nand->priv;
+	doc->oob_page = page;
+	memcpy(doc->oob_buf, nand->oob_poi, 16);
+	return 0;
+}
+
+static int __init read_factory_bbt(struct mtd_info *mtd)
+{
+	/*
+	 * The device contains a read-only factory bad block table.  Read it and
+	 * update the memory-based bbt accordingly.
+	 */
+
+	struct nand_chip *nand = mtd->priv;
+	struct docg4_priv *doc = nand->priv;
+	uint32_t g4_addr = mtd_to_docg4_address(DOCG4_FACTORY_BBT_PAGE, 0);
+	uint8_t *buf;
+	int i, block;
+	__u32 eccfailed_stats = mtd->ecc_stats.failed;
+
+	buf = kzalloc(DOCG4_PAGE_SIZE, GFP_KERNEL);
+	if (buf == NULL)
+		return -ENOMEM;
+
+	read_page_prologue(mtd, g4_addr);
+	docg4_read_page(mtd, nand, buf, 0, DOCG4_FACTORY_BBT_PAGE);
+
+	/*
+	 * If no memory-based bbt was created, exit.  This will happen if module
+	 * parameter ignore_badblocks is set.  Then why even call this function?
+	 * For an unknown reason, block erase always fails if it's the first
+	 * operation after device power-up.  The above read ensures it never is.
+	 * Ugly, I know.
+	 */
+	if (nand->bbt == NULL)  /* no memory-based bbt */
+		goto exit;
+
+	if (mtd->ecc_stats.failed > eccfailed_stats) {
+		/*
+		 * Whoops, an ecc failure ocurred reading the factory bbt.
+		 * It is stored redundantly, so we get another chance.
+		 */
+		eccfailed_stats = mtd->ecc_stats.failed;
+		docg4_read_page(mtd, nand, buf, 0, DOCG4_REDUNDANT_BBT_PAGE);
+		if (mtd->ecc_stats.failed > eccfailed_stats) {
+			dev_warn(doc->dev,
+				 "The factory bbt could not be read!\n");
+			goto exit;
+		}
+	}
+
+	/*
+	 * Parse factory bbt and update memory-based bbt.  Factory bbt format is
+	 * simple: one bit per block, block numbers increase left to right (msb
+	 * to lsb).  Bit clear means bad block.
+	 */
+	for (i = block = 0; block < DOCG4_NUMBLOCKS; block += 8, i++) {
+		int bitnum;
+		unsigned long bits = ~buf[i];
+		for_each_set_bit(bitnum, &bits, 8) {
+			int badblock = block + 7 - bitnum;
+			nand->bbt[badblock / 4] |=
+				0x03 << ((badblock % 4) * 2);
+			mtd->ecc_stats.badblocks++;
+			dev_notice(doc->dev, "factory-marked bad block: %d\n",
+				   badblock);
+		}
+	}
+ exit:
+	kfree(buf);
+	return 0;
+}
+
+static int docg4_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+	/*
+	 * Mark a block as bad.  Bad blocks are marked in the oob area of the
+	 * first page of the block.  The default scan_bbt() in the nand
+	 * infrastructure code works fine for building the memory-based bbt
+	 * during initialization, as does the nand infrastructure function that
+	 * checks if a block is bad by reading the bbt.  This function replaces
+	 * the nand default because writes to oob-only are not supported.
+	 */
+
+	int ret, i;
+	uint8_t *buf;
+	struct nand_chip *nand = mtd->priv;
+	struct docg4_priv *doc = nand->priv;
+	struct nand_bbt_descr *bbtd = nand->badblock_pattern;
+	int page = (int)(ofs >> nand->page_shift);
+	uint32_t g4_addr = mtd_to_docg4_address(page, 0);
+
+	dev_dbg(doc->dev, "%s: %08llx\n", __func__, ofs);
+
+	if (unlikely(ofs & (DOCG4_BLOCK_SIZE - 1)))
+		dev_warn(doc->dev, "%s: ofs %llx not start of block!\n",
+			 __func__, ofs);
+
+	/* allocate blank buffer for page data */
+	buf = kzalloc(DOCG4_PAGE_SIZE, GFP_KERNEL);
+	if (buf == NULL)
+		return -ENOMEM;
+
+	/* write bit-wise negation of pattern to oob buffer */
+	memset(nand->oob_poi, 0xff, mtd->oobsize);
+	for (i = 0; i < bbtd->len; i++)
+		nand->oob_poi[bbtd->offs + i] = ~bbtd->pattern[i];
+
+	/* write first page of block */
+	write_page_prologue(mtd, g4_addr);
+	docg4_write_page(mtd, nand, buf, 1);
+	ret = pageprog(mtd);
+
+	kfree(buf);
+
+	return ret;
+}
+
+static int docg4_block_neverbad(struct mtd_info *mtd, loff_t ofs, int getchip)
+{
+	/* only called when module_param ignore_badblocks is set */
+	return 0;
+}
+
+static int docg4_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	/*
+	 * Put the device into "deep power-down" mode.  Note that CE# must be
+	 * deasserted for this to take effect.  The xscale, e.g., can be
+	 * configured to float this signal when the processor enters power-down,
+	 * and a suitable pull-up ensures its deassertion.
+	 */
+
+	int i;
+	uint8_t pwr_down;
+	struct docg4_priv *doc = platform_get_drvdata(pdev);
+	void __iomem *docptr = doc->virtadr;
+
+	dev_dbg(doc->dev, "%s...\n", __func__);
+
+	/* poll the register that tells us we're ready to go to sleep */
+	for (i = 0; i < 10; i++) {
+		pwr_down = readb(docptr + DOC_POWERMODE);
+		if (pwr_down & DOC_POWERDOWN_READY)
+			break;
+		usleep_range(1000, 4000);
+	}
+
+	if (pwr_down & DOC_POWERDOWN_READY) {
+		dev_err(doc->dev, "suspend failed; "
+			"timeout polling DOC_POWERDOWN_READY\n");
+		return -EIO;
+	}
+
+	writew(DOC_ASICMODE_POWERDOWN | DOC_ASICMODE_MDWREN,
+	       docptr + DOC_ASICMODE);
+	writew(~(DOC_ASICMODE_POWERDOWN | DOC_ASICMODE_MDWREN),
+	       docptr + DOC_ASICMODECONFIRM);
+
+	write_nop(docptr);
+
+	return 0;
+}
+
+static int docg4_resume(struct platform_device *pdev)
+{
+
+	/*
+	 * Exit power-down.  Twelve consecutive reads of the address below
+	 * accomplishes this, assuming CE# has been asserted.
+	 */
+
+	struct docg4_priv *doc = platform_get_drvdata(pdev);
+	void __iomem *docptr = doc->virtadr;
+	int i;
+
+	dev_dbg(doc->dev, "%s...\n", __func__);
+
+	for (i = 0; i < 12; i++)
+		readb(docptr + 0x1fff);
+
+	return 0;
+}
+
+static void __init init_mtd_structs(struct mtd_info *mtd)
+{
+	/* initialize mtd and nand data structures */
+
+	/*
+	 * Note that some of the following initializations are not usually
+	 * required within a nand driver because they are performed by the nand
+	 * infrastructure code as part of nand_scan().  In this case they need
+	 * to be initialized here because we skip call to nand_scan_ident() (the
+	 * first half of nand_scan()).  The call to nand_scan_ident() is skipped
+	 * because for this device the chip id is not read in the manner of a
+	 * standard nand device.  Unfortunately, nand_scan_ident() does other
+	 * things as well, such as call nand_set_defaults().
+	 */
+
+	struct nand_chip *nand = mtd->priv;
+	struct docg4_priv *doc = nand->priv;
+
+	mtd->size = DOCG4_CHIP_SIZE;
+	mtd->name = "Msys_Diskonchip_G4";
+	mtd->writesize = DOCG4_PAGE_SIZE;
+	mtd->erasesize = DOCG4_BLOCK_SIZE;
+	mtd->oobsize = DOCG4_OOB_SIZE;
+	nand->chipsize = DOCG4_CHIP_SIZE;
+	nand->chip_shift = DOCG4_CHIP_SHIFT;
+	nand->bbt_erase_shift = nand->phys_erase_shift = DOCG4_ERASE_SHIFT;
+	nand->chip_delay = 20;
+	nand->page_shift = DOCG4_PAGE_SHIFT;
+	nand->pagemask = 0x3ffff;
+	nand->badblockpos = NAND_LARGE_BADBLOCK_POS;
+	nand->badblockbits = 8;
+	nand->ecc.layout = &docg4_oobinfo;
+	nand->ecc.mode = NAND_ECC_HW_SYNDROME;
+	nand->ecc.size = DOCG4_PAGE_SIZE;
+	nand->ecc.prepad = 8;
+	nand->ecc.bytes	= 8;
+	nand->ecc.strength = DOCG4_T;
+	nand->options = NAND_BUSWIDTH_16 | NAND_NO_SUBPAGE_WRITE;
+	nand->IO_ADDR_R = nand->IO_ADDR_W = doc->virtadr + DOC_IOSPACE_DATA;
+	nand->controller = &nand->hwcontrol;
+	spin_lock_init(&nand->controller->lock);
+	init_waitqueue_head(&nand->controller->wq);
+
+	/* methods */
+	nand->cmdfunc = docg4_command;
+	nand->waitfunc = docg4_wait;
+	nand->select_chip = docg4_select_chip;
+	nand->read_byte = docg4_read_byte;
+	nand->block_markbad = docg4_block_markbad;
+	nand->read_buf = docg4_read_buf;
+	nand->write_buf = docg4_write_buf16;
+	nand->erase = docg4_erase_block;
+	nand->ecc.read_page = docg4_read_page;
+	nand->ecc.write_page = docg4_write_page;
+	nand->ecc.read_page_raw = docg4_read_page_raw;
+	nand->ecc.write_page_raw = docg4_write_page_raw;
+	nand->ecc.read_oob = docg4_read_oob;
+	nand->ecc.write_oob = docg4_write_oob;
+
+	/*
+	 * The way the nand infrastructure code is written, a memory-based bbt
+	 * is not created if NAND_SKIP_BBTSCAN is set.  With no memory bbt,
+	 * nand->block_bad() is used.  So when ignoring bad blocks, we skip the
+	 * scan and define a dummy block_bad() which always returns 0.
+	 */
+	if (ignore_badblocks) {
+		nand->options |= NAND_SKIP_BBTSCAN;
+		nand->block_bad	= docg4_block_neverbad;
+	}
+
+}
+
+static int __init read_id_reg(struct mtd_info *mtd)
+{
+	struct nand_chip *nand = mtd->priv;
+	struct docg4_priv *doc = nand->priv;
+	void __iomem *docptr = doc->virtadr;
+	uint16_t id1, id2;
+
+	/* check for presence of g4 chip by reading id registers */
+	id1 = readw(docptr + DOC_CHIPID);
+	id1 = readw(docptr + DOCG4_MYSTERY_REG);
+	id2 = readw(docptr + DOC_CHIPID_INV);
+	id2 = readw(docptr + DOCG4_MYSTERY_REG);
+
+	if (id1 == DOCG4_IDREG1_VALUE && id2 == DOCG4_IDREG2_VALUE) {
+		dev_info(doc->dev,
+			 "NAND device: 128MiB Diskonchip G4 detected\n");
+		return 0;
+	}
+
+	return -ENODEV;
+}
+
+static char const *part_probes[] = { "cmdlinepart", "saftlpart", NULL };
+
+static int __init probe_docg4(struct platform_device *pdev)
+{
+	struct mtd_info *mtd;
+	struct nand_chip *nand;
+	void __iomem *virtadr;
+	struct docg4_priv *doc;
+	int len, retval;
+	struct resource *r;
+	struct device *dev = &pdev->dev;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (r == NULL) {
+		dev_err(dev, "no io memory resource defined!\n");
+		return -ENODEV;
+	}
+
+	virtadr = ioremap(r->start, resource_size(r));
+	if (!virtadr) {
+		dev_err(dev, "Diskonchip ioremap failed: %pR\n", r);
+		return -EIO;
+	}
+
+	len = sizeof(struct mtd_info) + sizeof(struct nand_chip) +
+		sizeof(struct docg4_priv);
+	mtd = kzalloc(len, GFP_KERNEL);
+	if (mtd == NULL) {
+		retval = -ENOMEM;
+		goto fail;
+	}
+	nand = (struct nand_chip *) (mtd + 1);
+	doc = (struct docg4_priv *) (nand + 1);
+	mtd->priv = nand;
+	nand->priv = doc;
+	mtd->owner = THIS_MODULE;
+	doc->virtadr = virtadr;
+	doc->dev = dev;
+
+	init_mtd_structs(mtd);
+
+	/* initialize kernel bch algorithm */
+	doc->bch = init_bch(DOCG4_M, DOCG4_T, DOCG4_PRIMITIVE_POLY);
+	if (doc->bch == NULL) {
+		retval = -EINVAL;
+		goto fail;
+	}
+
+	platform_set_drvdata(pdev, doc);
+
+	reset(mtd);
+	retval = read_id_reg(mtd);
+	if (retval == -ENODEV) {
+		dev_warn(dev, "No diskonchip G4 device found.\n");
+		goto fail;
+	}
+
+	retval = nand_scan_tail(mtd);
+	if (retval)
+		goto fail;
+
+	retval = read_factory_bbt(mtd);
+	if (retval)
+		goto fail;
+
+	retval = mtd_device_parse_register(mtd, part_probes, NULL, NULL, 0);
+	if (retval)
+		goto fail;
+
+	doc->mtd = mtd;
+	return 0;
+
+ fail:
+	iounmap(virtadr);
+	if (mtd) {
+		/* re-declarations avoid compiler warning */
+		struct nand_chip *nand = mtd->priv;
+		struct docg4_priv *doc = nand->priv;
+		nand_release(mtd); /* deletes partitions and mtd devices */
+		free_bch(doc->bch);
+		kfree(mtd);
+	}
+
+	return retval;
+}
+
+static int __exit cleanup_docg4(struct platform_device *pdev)
+{
+	struct docg4_priv *doc = platform_get_drvdata(pdev);
+	nand_release(doc->mtd);
+	free_bch(doc->bch);
+	kfree(doc->mtd);
+	iounmap(doc->virtadr);
+	return 0;
+}
+
+static struct platform_driver docg4_driver = {
+	.driver		= {
+		.name	= "docg4",
+		.owner	= THIS_MODULE,
+	},
+	.suspend	= docg4_suspend,
+	.resume		= docg4_resume,
+	.remove		= __exit_p(cleanup_docg4),
+};
+
+module_platform_driver_probe(docg4_driver, probe_docg4);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mike Dunn");
+MODULE_DESCRIPTION("M-Systems DiskOnChip G4 device driver");
diff --git a/drivers/mtd/nand/edb7312.c b/drivers/mtd/nand/edb7312.c
deleted file mode 100644
index 86366bfba9f..00000000000
--- a/drivers/mtd/nand/edb7312.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- *  drivers/mtd/nand/edb7312.c
- *
- *  Copyright (C) 2002 Marius Gröger (mag@sysgo.de)
- *
- *  Derived from drivers/mtd/nand/autcpu12.c
- *       Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Overview:
- *   This is a device driver for the NAND flash device found on the
- *   CLEP7312 board which utilizes the Toshiba TC58V64AFT part. This is
- *   a 64Mibit (8MiB x 8 bits) NAND flash device.
- */
-
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <asm/io.h>
-#include <mach/hardware.h>	/* for CLPS7111_VIRT_BASE */
-#include <asm/sizes.h>
-#include <asm/hardware/clps7111.h>
-
-/*
- * MTD structure for EDB7312 board
- */
-static struct mtd_info *ep7312_mtd = NULL;
-
-/*
- * Values specific to the EDB7312 board (used with EP7312 processor)
- */
-#define EP7312_FIO_PBASE 0x10000000	/* Phys address of flash */
-#define EP7312_PXDR	0x0001	/*
-				 * IO offset to Port B data register
-				 * where the CLE, ALE and NCE pins
-				 * are wired to.
-				 */
-#define EP7312_PXDDR	0x0041	/*
-				 * IO offset to Port B data direction
-				 * register so we can control the IO
-				 * lines.
-				 */
-
-/*
- * Module stuff
- */
-
-static unsigned long ep7312_fio_pbase = EP7312_FIO_PBASE;
-static void __iomem *ep7312_pxdr = (void __iomem *)EP7312_PXDR;
-static void __iomem *ep7312_pxddr = (void __iomem *)EP7312_PXDDR;
-
-#ifdef CONFIG_MTD_PARTITIONS
-/*
- * Define static partitions for flash device
- */
-static struct mtd_partition partition_info[] = {
-	{.name = "EP7312 Nand Flash",
-	 .offset = 0,
-	 .size = 8 * 1024 * 1024}
-};
-
-#define NUM_PARTITIONS 1
-
-#endif
-
-/*
- *	hardware specific access to control-lines
- *
- *	NAND_NCE: bit 0 -> bit 6 (bit 7 = 1)
- *	NAND_CLE: bit 1 -> bit 4
- *	NAND_ALE: bit 2 -> bit 5
- */
-static void ep7312_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
-	struct nand_chip *chip = mtd->priv;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		unsigned char bits = 0x80;
-
-		bits |= (ctrl & (NAND_CLE | NAND_ALE)) << 3;
-		bits |= (ctrl & NAND_NCE) ? 0x00 : 0x40;
-
-		clps_writeb((clps_readb(ep7312_pxdr)  & 0xF0) | bits,
-			    ep7312_pxdr);
-	}
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, chip->IO_ADDR_W);
-}
-
-/*
- *	read device ready pin
- */
-static int ep7312_device_ready(struct mtd_info *mtd)
-{
-	return 1;
-}
-
-#ifdef CONFIG_MTD_PARTITIONS
-const char *part_probes[] = { "cmdlinepart", NULL };
-#endif
-
-/*
- * Main initialization routine
- */
-static int __init ep7312_init(void)
-{
-	struct nand_chip *this;
-	const char *part_type = 0;
-	int mtd_parts_nb = 0;
-	struct mtd_partition *mtd_parts = 0;
-	void __iomem *ep7312_fio_base;
-
-	/* Allocate memory for MTD device structure and private data */
-	ep7312_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
-	if (!ep7312_mtd) {
-		printk("Unable to allocate EDB7312 NAND MTD device structure.\n");
-		return -ENOMEM;
-	}
-
-	/* map physical address */
-	ep7312_fio_base = ioremap(ep7312_fio_pbase, SZ_1K);
-	if (!ep7312_fio_base) {
-		printk("ioremap EDB7312 NAND flash failed\n");
-		kfree(ep7312_mtd);
-		return -EIO;
-	}
-
-	/* Get pointer to private data */
-	this = (struct nand_chip *)(&ep7312_mtd[1]);
-
-	/* Initialize structures */
-	memset(ep7312_mtd, 0, sizeof(struct mtd_info));
-	memset(this, 0, sizeof(struct nand_chip));
-
-	/* Link the private data with the MTD structure */
-	ep7312_mtd->priv = this;
-	ep7312_mtd->owner = THIS_MODULE;
-
-	/*
-	 * Set GPIO Port B control register so that the pins are configured
-	 * to be outputs for controlling the NAND flash.
-	 */
-	clps_writeb(0xf0, ep7312_pxddr);
-
-	/* insert callbacks */
-	this->IO_ADDR_R = ep7312_fio_base;
-	this->IO_ADDR_W = ep7312_fio_base;
-	this->cmd_ctrl = ep7312_hwcontrol;
-	this->dev_ready = ep7312_device_ready;
-	/* 15 us command delay time */
-	this->chip_delay = 15;
-
-	/* Scan to find existence of the device */
-	if (nand_scan(ep7312_mtd, 1)) {
-		iounmap((void *)ep7312_fio_base);
-		kfree(ep7312_mtd);
-		return -ENXIO;
-	}
-#ifdef CONFIG_MTD_PARTITIONS
-	ep7312_mtd->name = "edb7312-nand";
-	mtd_parts_nb = parse_mtd_partitions(ep7312_mtd, part_probes, &mtd_parts, 0);
-	if (mtd_parts_nb > 0)
-		part_type = "command line";
-	else
-		mtd_parts_nb = 0;
-#endif
-	if (mtd_parts_nb == 0) {
-		mtd_parts = partition_info;
-		mtd_parts_nb = NUM_PARTITIONS;
-		part_type = "static";
-	}
-
-	/* Register the partitions */
-	printk(KERN_NOTICE "Using %s partition definition\n", part_type);
-	add_mtd_partitions(ep7312_mtd, mtd_parts, mtd_parts_nb);
-
-	/* Return happy */
-	return 0;
-}
-
-module_init(ep7312_init);
-
-/*
- * Clean up routine
- */
-static void __exit ep7312_cleanup(void)
-{
-	struct nand_chip *this = (struct nand_chip *)&ep7312_mtd[1];
-
-	/* Release resources, unregister device */
-	nand_release(ap7312_mtd);
-
-	/* Release io resource */
-	iounmap(this->IO_ADDR_R);
-
-	/* Free the MTD device structure */
-	kfree(ep7312_mtd);
-}
-
-module_exit(ep7312_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Marius Groeger <mag@sysgo.de>");
-MODULE_DESCRIPTION("MTD map driver for Cogent EDB7312 board");
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 5084cc51794..545a5c002f0 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -1,9 +1,11 @@
 /* Freescale Enhanced Local Bus Controller NAND driver
  *
- * Copyright (c) 2006-2007 Freescale Semiconductor
+ * Copyright © 2006-2007, 2010 Freescale Semiconductor
  *
  * Authors: Nick Spence <nick.spence@freescale.com>,
  *          Scott Wood <scottwood@freescale.com>
+ *          Jack Lan <jack.lan@freescale.com>
+ *          Roy Zang <tie-fei.zang@freescale.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -22,11 +24,12 @@
 
 #include <linux/module.h>
 #include <linux/types.h>
-#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/ioport.h>
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
+#include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 
@@ -42,14 +45,12 @@
 #define ERR_BYTE 0xFF /* Value returned for read bytes when read failed */
 #define FCM_TIMEOUT_MSECS 500 /* Maximum number of mSecs to wait for FCM */
 
-struct fsl_elbc_ctrl;
-
 /* mtd information per set */
 
 struct fsl_elbc_mtd {
 	struct mtd_info mtd;
 	struct nand_chip chip;
-	struct fsl_elbc_ctrl *ctrl;
+	struct fsl_lbc_ctrl *ctrl;
 
 	struct device *dev;
 	int bank;               /* Chip select bank number           */
@@ -58,18 +59,12 @@ struct fsl_elbc_mtd {
 	unsigned int fmr;       /* FCM Flash Mode Register value     */
 };
 
-/* overview of the fsl elbc controller */
+/* Freescale eLBC FCM controller information */
 
-struct fsl_elbc_ctrl {
+struct fsl_elbc_fcm_ctrl {
 	struct nand_hw_control controller;
 	struct fsl_elbc_mtd *chips[MAX_BANKS];
 
-	/* device info */
-	struct device *dev;
-	struct fsl_lbc_regs __iomem *regs;
-	int irq;
-	wait_queue_head_t irq_wait;
-	unsigned int irq_status; /* status read from LTESR by irq handler */
 	u8 __iomem *addr;        /* Address of assigned FCM buffer        */
 	unsigned int page;       /* Last page written to / read from      */
 	unsigned int read_bytes; /* Number of bytes read during command   */
@@ -79,7 +74,8 @@ struct fsl_elbc_ctrl {
 	unsigned int mdr;        /* UPM/FCM Data Register value           */
 	unsigned int use_mdr;    /* Non zero if the MDR is to be set      */
 	unsigned int oob;        /* Non zero if operating on OOB data     */
-	char *oob_poi;           /* Place to write ECC after read back    */
+	unsigned int counter;	 /* counter for the initializations	  */
+	unsigned int max_bitflips;  /* Saved during READ0 cmd		  */
 };
 
 /* These map to the positions used by the FCM hardware ECC generator */
@@ -113,20 +109,6 @@ static struct nand_ecclayout fsl_elbc_oob_lp_eccm1 = {
 };
 
 /*
- * fsl_elbc_oob_lp_eccm* specify that LP NAND's OOB free area starts at offset
- * 1, so we have to adjust bad block pattern. This pattern should be used for
- * x8 chips only. So far hardware does not support x16 chips anyway.
- */
-static u8 scan_ff_pattern[] = { 0xff, };
-
-static struct nand_bbt_descr largepage_memorybased = {
-	.options = 0,
-	.offs = 0,
-	.len = 1,
-	.pattern = scan_ff_pattern,
-};
-
-/*
  * ELBC may use HW ECC, so that OOB offsets, that NAND core uses for bbt,
  * interfere with ECC positions, that's why we implement our own descriptors.
  * OOB {11, 5}, works for both SP and LP chips, with ECCM = 1 and ECCM = 0.
@@ -164,37 +146,47 @@ static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob)
 {
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
-	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+	struct fsl_lbc_ctrl *ctrl = priv->ctrl;
 	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+	struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = ctrl->nand;
 	int buf_num;
 
-	ctrl->page = page_addr;
-
-	out_be32(&lbc->fbar,
-	         page_addr >> (chip->phys_erase_shift - chip->page_shift));
+	elbc_fcm_ctrl->page = page_addr;
 
 	if (priv->page_size) {
+		/*
+		 * large page size chip : FPAR[PI] save the lowest 6 bits,
+		 *                        FBAR[BLK] save the other bits.
+		 */
+		out_be32(&lbc->fbar, page_addr >> 6);
 		out_be32(&lbc->fpar,
 		         ((page_addr << FPAR_LP_PI_SHIFT) & FPAR_LP_PI) |
 		         (oob ? FPAR_LP_MS : 0) | column);
 		buf_num = (page_addr & 1) << 2;
 	} else {
+		/*
+		 * small page size chip : FPAR[PI] save the lowest 5 bits,
+		 *                        FBAR[BLK] save the other bits.
+		 */
+		out_be32(&lbc->fbar, page_addr >> 5);
 		out_be32(&lbc->fpar,
 		         ((page_addr << FPAR_SP_PI_SHIFT) & FPAR_SP_PI) |
 		         (oob ? FPAR_SP_MS : 0) | column);
 		buf_num = page_addr & 7;
 	}
 
-	ctrl->addr = priv->vbase + buf_num * 1024;
-	ctrl->index = column;
+	elbc_fcm_ctrl->addr = priv->vbase + buf_num * 1024;
+	elbc_fcm_ctrl->index = column;
 
 	/* for OOB data point to the second half of the buffer */
 	if (oob)
-		ctrl->index += priv->page_size ? 2048 : 512;
+		elbc_fcm_ctrl->index += priv->page_size ? 2048 : 512;
 
-	dev_vdbg(ctrl->dev, "set_addr: bank=%d, ctrl->addr=0x%p (0x%p), "
+	dev_vdbg(priv->dev, "set_addr: bank=%d, "
+			    "elbc_fcm_ctrl->addr=0x%p (0x%p), "
 	                    "index %x, pes %d ps %d\n",
-	         buf_num, ctrl->addr, priv->vbase, ctrl->index,
+		 buf_num, elbc_fcm_ctrl->addr, priv->vbase,
+		 elbc_fcm_ctrl->index,
 	         chip->phys_erase_shift, chip->page_shift);
 }
 
@@ -205,18 +197,19 @@ static int fsl_elbc_run_command(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
-	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+	struct fsl_lbc_ctrl *ctrl = priv->ctrl;
+	struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = ctrl->nand;
 	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 
 	/* Setup the FMR[OP] to execute without write protection */
 	out_be32(&lbc->fmr, priv->fmr | 3);
-	if (ctrl->use_mdr)
-		out_be32(&lbc->mdr, ctrl->mdr);
+	if (elbc_fcm_ctrl->use_mdr)
+		out_be32(&lbc->mdr, elbc_fcm_ctrl->mdr);
 
-	dev_vdbg(ctrl->dev,
+	dev_vdbg(priv->dev,
 	         "fsl_elbc_run_command: fmr=%08x fir=%08x fcr=%08x\n",
 	         in_be32(&lbc->fmr), in_be32(&lbc->fir), in_be32(&lbc->fcr));
-	dev_vdbg(ctrl->dev,
+	dev_vdbg(priv->dev,
 	         "fsl_elbc_run_command: fbar=%08x fpar=%08x "
 	         "fbcr=%08x bank=%d\n",
 	         in_be32(&lbc->fbar), in_be32(&lbc->fpar),
@@ -229,29 +222,54 @@ static int fsl_elbc_run_command(struct mtd_info *mtd)
 	/* wait for FCM complete flag or timeout */
 	wait_event_timeout(ctrl->irq_wait, ctrl->irq_status,
 	                   FCM_TIMEOUT_MSECS * HZ/1000);
-	ctrl->status = ctrl->irq_status;
-
+	elbc_fcm_ctrl->status = ctrl->irq_status;
 	/* store mdr value in case it was needed */
-	if (ctrl->use_mdr)
-		ctrl->mdr = in_be32(&lbc->mdr);
+	if (elbc_fcm_ctrl->use_mdr)
+		elbc_fcm_ctrl->mdr = in_be32(&lbc->mdr);
 
-	ctrl->use_mdr = 0;
+	elbc_fcm_ctrl->use_mdr = 0;
 
-	if (ctrl->status != LTESR_CC) {
-		dev_info(ctrl->dev,
+	if (elbc_fcm_ctrl->status != LTESR_CC) {
+		dev_info(priv->dev,
 		         "command failed: fir %x fcr %x status %x mdr %x\n",
 		         in_be32(&lbc->fir), in_be32(&lbc->fcr),
-		         ctrl->status, ctrl->mdr);
+			 elbc_fcm_ctrl->status, elbc_fcm_ctrl->mdr);
 		return -EIO;
 	}
 
+	if (chip->ecc.mode != NAND_ECC_HW)
+		return 0;
+
+	elbc_fcm_ctrl->max_bitflips = 0;
+
+	if (elbc_fcm_ctrl->read_bytes == mtd->writesize + mtd->oobsize) {
+		uint32_t lteccr = in_be32(&lbc->lteccr);
+		/*
+		 * if command was a full page read and the ELBC
+		 * has the LTECCR register, then bits 12-15 (ppc order) of
+		 * LTECCR indicates which 512 byte sub-pages had fixed errors.
+		 * bits 28-31 are uncorrectable errors, marked elsewhere.
+		 * for small page nand only 1 bit is used.
+		 * if the ELBC doesn't have the lteccr register it reads 0
+		 * FIXME: 4 bits can be corrected on NANDs with 2k pages, so
+		 * count the number of sub-pages with bitflips and update
+		 * ecc_stats.corrected accordingly.
+		 */
+		if (lteccr & 0x000F000F)
+			out_be32(&lbc->lteccr, 0x000F000F); /* clear lteccr */
+		if (lteccr & 0x000F0000) {
+			mtd->ecc_stats.corrected++;
+			elbc_fcm_ctrl->max_bitflips = 1;
+		}
+	}
+
 	return 0;
 }
 
 static void fsl_elbc_do_read(struct nand_chip *chip, int oob)
 {
 	struct fsl_elbc_mtd *priv = chip->priv;
-	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+	struct fsl_lbc_ctrl *ctrl = priv->ctrl;
 	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 
 	if (priv->page_size) {
@@ -284,15 +302,16 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 {
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
-	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+	struct fsl_lbc_ctrl *ctrl = priv->ctrl;
+	struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = ctrl->nand;
 	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 
-	ctrl->use_mdr = 0;
+	elbc_fcm_ctrl->use_mdr = 0;
 
 	/* clear the read buffer */
-	ctrl->read_bytes = 0;
+	elbc_fcm_ctrl->read_bytes = 0;
 	if (command != NAND_CMD_PAGEPROG)
-		ctrl->index = 0;
+		elbc_fcm_ctrl->index = 0;
 
 	switch (command) {
 	/* READ0 and READ1 read the entire buffer to use hardware ECC. */
@@ -301,7 +320,7 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 
 	/* fall-through */
 	case NAND_CMD_READ0:
-		dev_dbg(ctrl->dev,
+		dev_dbg(priv->dev,
 		        "fsl_elbc_cmdfunc: NAND_CMD_READ0, page_addr:"
 		        " 0x%x, column: 0x%x.\n", page_addr, column);
 
@@ -309,8 +328,8 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 		out_be32(&lbc->fbcr, 0); /* read entire page to enable ECC */
 		set_addr(mtd, 0, page_addr, 0);
 
-		ctrl->read_bytes = mtd->writesize + mtd->oobsize;
-		ctrl->index += column;
+		elbc_fcm_ctrl->read_bytes = mtd->writesize + mtd->oobsize;
+		elbc_fcm_ctrl->index += column;
 
 		fsl_elbc_do_read(chip, 0);
 		fsl_elbc_run_command(mtd);
@@ -318,40 +337,42 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 
 	/* READOOB reads only the OOB because no ECC is performed. */
 	case NAND_CMD_READOOB:
-		dev_vdbg(ctrl->dev,
+		dev_vdbg(priv->dev,
 		         "fsl_elbc_cmdfunc: NAND_CMD_READOOB, page_addr:"
 			 " 0x%x, column: 0x%x.\n", page_addr, column);
 
 		out_be32(&lbc->fbcr, mtd->oobsize - column);
 		set_addr(mtd, column, page_addr, 1);
 
-		ctrl->read_bytes = mtd->writesize + mtd->oobsize;
+		elbc_fcm_ctrl->read_bytes = mtd->writesize + mtd->oobsize;
 
 		fsl_elbc_do_read(chip, 1);
 		fsl_elbc_run_command(mtd);
 		return;
 
-	/* READID must read all 5 possible bytes while CEB is active */
 	case NAND_CMD_READID:
-		dev_vdbg(ctrl->dev, "fsl_elbc_cmdfunc: NAND_CMD_READID.\n");
+	case NAND_CMD_PARAM:
+		dev_vdbg(priv->dev, "fsl_elbc_cmdfunc: NAND_CMD %x\n", command);
 
 		out_be32(&lbc->fir, (FIR_OP_CM0 << FIR_OP0_SHIFT) |
 		                    (FIR_OP_UA  << FIR_OP1_SHIFT) |
 		                    (FIR_OP_RBW << FIR_OP2_SHIFT));
-		out_be32(&lbc->fcr, NAND_CMD_READID << FCR_CMD0_SHIFT);
-		/* 5 bytes for manuf, device and exts */
-		out_be32(&lbc->fbcr, 5);
-		ctrl->read_bytes = 5;
-		ctrl->use_mdr = 1;
-		ctrl->mdr = 0;
-
+		out_be32(&lbc->fcr, command << FCR_CMD0_SHIFT);
+		/*
+		 * although currently it's 8 bytes for READID, we always read
+		 * the maximum 256 bytes(for PARAM)
+		 */
+		out_be32(&lbc->fbcr, 256);
+		elbc_fcm_ctrl->read_bytes = 256;
+		elbc_fcm_ctrl->use_mdr = 1;
+		elbc_fcm_ctrl->mdr = column;
 		set_addr(mtd, 0, 0, 0);
 		fsl_elbc_run_command(mtd);
 		return;
 
 	/* ERASE1 stores the block and page address */
 	case NAND_CMD_ERASE1:
-		dev_vdbg(ctrl->dev,
+		dev_vdbg(priv->dev,
 		         "fsl_elbc_cmdfunc: NAND_CMD_ERASE1, "
 		         "page_addr: 0x%x.\n", page_addr);
 		set_addr(mtd, 0, page_addr, 0);
@@ -359,7 +380,7 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 
 	/* ERASE2 uses the block and page address from ERASE1 */
 	case NAND_CMD_ERASE2:
-		dev_vdbg(ctrl->dev, "fsl_elbc_cmdfunc: NAND_CMD_ERASE2.\n");
+		dev_vdbg(priv->dev, "fsl_elbc_cmdfunc: NAND_CMD_ERASE2.\n");
 
 		out_be32(&lbc->fir,
 		         (FIR_OP_CM0 << FIR_OP0_SHIFT) |
@@ -374,8 +395,8 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 		         (NAND_CMD_ERASE2 << FCR_CMD2_SHIFT));
 
 		out_be32(&lbc->fbcr, 0);
-		ctrl->read_bytes = 0;
-		ctrl->use_mdr = 1;
+		elbc_fcm_ctrl->read_bytes = 0;
+		elbc_fcm_ctrl->use_mdr = 1;
 
 		fsl_elbc_run_command(mtd);
 		return;
@@ -383,14 +404,22 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 	/* SEQIN sets up the addr buffer and all registers except the length */
 	case NAND_CMD_SEQIN: {
 		__be32 fcr;
-		dev_vdbg(ctrl->dev,
-		         "fsl_elbc_cmdfunc: NAND_CMD_SEQIN/PAGE_PROG, "
+		dev_vdbg(priv->dev,
+			 "fsl_elbc_cmdfunc: NAND_CMD_SEQIN/PAGE_PROG, "
 		         "page_addr: 0x%x, column: 0x%x.\n",
 		         page_addr, column);
 
-		ctrl->column = column;
-		ctrl->oob = 0;
-		ctrl->use_mdr = 1;
+		elbc_fcm_ctrl->column = column;
+		elbc_fcm_ctrl->use_mdr = 1;
+
+		if (column >= mtd->writesize) {
+			/* OOB area */
+			column -= mtd->writesize;
+			elbc_fcm_ctrl->oob = 1;
+		} else {
+			WARN_ON(column != 0);
+			elbc_fcm_ctrl->oob = 0;
+		}
 
 		fcr = (NAND_CMD_STATUS   << FCR_CMD1_SHIFT) |
 		      (NAND_CMD_SEQIN    << FCR_CMD2_SHIFT) |
@@ -416,63 +445,37 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 			         (FIR_OP_CW1 << FIR_OP6_SHIFT) |
 			         (FIR_OP_RS  << FIR_OP7_SHIFT));
 
-			if (column >= mtd->writesize) {
+			if (elbc_fcm_ctrl->oob)
 				/* OOB area --> READOOB */
-				column -= mtd->writesize;
 				fcr |= NAND_CMD_READOOB << FCR_CMD0_SHIFT;
-				ctrl->oob = 1;
-			} else {
-				WARN_ON(column != 0);
+			else
 				/* First 256 bytes --> READ0 */
 				fcr |= NAND_CMD_READ0 << FCR_CMD0_SHIFT;
-			}
 		}
 
 		out_be32(&lbc->fcr, fcr);
-		set_addr(mtd, column, page_addr, ctrl->oob);
+		set_addr(mtd, column, page_addr, elbc_fcm_ctrl->oob);
 		return;
 	}
 
 	/* PAGEPROG reuses all of the setup from SEQIN and adds the length */
 	case NAND_CMD_PAGEPROG: {
-		int full_page;
-		dev_vdbg(ctrl->dev,
+		dev_vdbg(priv->dev,
 		         "fsl_elbc_cmdfunc: NAND_CMD_PAGEPROG "
-		         "writing %d bytes.\n", ctrl->index);
+			 "writing %d bytes.\n", elbc_fcm_ctrl->index);
 
 		/* if the write did not start at 0 or is not a full page
 		 * then set the exact length, otherwise use a full page
 		 * write so the HW generates the ECC.
 		 */
-		if (ctrl->oob || ctrl->column != 0 ||
-		    ctrl->index != mtd->writesize + mtd->oobsize) {
-			out_be32(&lbc->fbcr, ctrl->index);
-			full_page = 0;
-		} else {
+		if (elbc_fcm_ctrl->oob || elbc_fcm_ctrl->column != 0 ||
+		    elbc_fcm_ctrl->index != mtd->writesize + mtd->oobsize)
+			out_be32(&lbc->fbcr,
+				elbc_fcm_ctrl->index - elbc_fcm_ctrl->column);
+		else
 			out_be32(&lbc->fbcr, 0);
-			full_page = 1;
-		}
 
 		fsl_elbc_run_command(mtd);
-
-		/* Read back the page in order to fill in the ECC for the
-		 * caller.  Is this really needed?
-		 */
-		if (full_page && ctrl->oob_poi) {
-			out_be32(&lbc->fbcr, 3);
-			set_addr(mtd, 6, page_addr, 1);
-
-			ctrl->read_bytes = mtd->writesize + 9;
-
-			fsl_elbc_do_read(chip, 1);
-			fsl_elbc_run_command(mtd);
-
-			memcpy_fromio(ctrl->oob_poi + 6,
-			              &ctrl->addr[ctrl->index], 3);
-			ctrl->index += 3;
-		}
-
-		ctrl->oob_poi = NULL;
 		return;
 	}
 
@@ -485,26 +488,26 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 		out_be32(&lbc->fcr, NAND_CMD_STATUS << FCR_CMD0_SHIFT);
 		out_be32(&lbc->fbcr, 1);
 		set_addr(mtd, 0, 0, 0);
-		ctrl->read_bytes = 1;
+		elbc_fcm_ctrl->read_bytes = 1;
 
 		fsl_elbc_run_command(mtd);
 
 		/* The chip always seems to report that it is
 		 * write-protected, even when it is not.
 		 */
-		setbits8(ctrl->addr, NAND_STATUS_WP);
+		setbits8(elbc_fcm_ctrl->addr, NAND_STATUS_WP);
 		return;
 
 	/* RESET without waiting for the ready line */
 	case NAND_CMD_RESET:
-		dev_dbg(ctrl->dev, "fsl_elbc_cmdfunc: NAND_CMD_RESET.\n");
+		dev_dbg(priv->dev, "fsl_elbc_cmdfunc: NAND_CMD_RESET.\n");
 		out_be32(&lbc->fir, FIR_OP_CM0 << FIR_OP0_SHIFT);
 		out_be32(&lbc->fcr, NAND_CMD_RESET << FCR_CMD0_SHIFT);
 		fsl_elbc_run_command(mtd);
 		return;
 
 	default:
-		dev_err(ctrl->dev,
+		dev_err(priv->dev,
 		        "fsl_elbc_cmdfunc: error, unsupported command 0x%x.\n",
 		        command);
 	}
@@ -524,24 +527,24 @@ static void fsl_elbc_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
 {
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
-	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+	struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
 	unsigned int bufsize = mtd->writesize + mtd->oobsize;
 
 	if (len <= 0) {
-		dev_err(ctrl->dev, "write_buf of %d bytes", len);
-		ctrl->status = 0;
+		dev_err(priv->dev, "write_buf of %d bytes", len);
+		elbc_fcm_ctrl->status = 0;
 		return;
 	}
 
-	if ((unsigned int)len > bufsize - ctrl->index) {
-		dev_err(ctrl->dev,
+	if ((unsigned int)len > bufsize - elbc_fcm_ctrl->index) {
+		dev_err(priv->dev,
 		        "write_buf beyond end of buffer "
 		        "(%d requested, %u available)\n",
-		        len, bufsize - ctrl->index);
-		len = bufsize - ctrl->index;
+			len, bufsize - elbc_fcm_ctrl->index);
+		len = bufsize - elbc_fcm_ctrl->index;
 	}
 
-	memcpy_toio(&ctrl->addr[ctrl->index], buf, len);
+	memcpy_toio(&elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index], buf, len);
 	/*
 	 * This is workaround for the weird elbc hangs during nand write,
 	 * Scott Wood says: "...perhaps difference in how long it takes a
@@ -549,9 +552,9 @@ static void fsl_elbc_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
 	 * is causing problems, and sync isn't helping for some reason."
 	 * Reading back the last byte helps though.
 	 */
-	in_8(&ctrl->addr[ctrl->index] + len - 1);
+	in_8(&elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index] + len - 1);
 
-	ctrl->index += len;
+	elbc_fcm_ctrl->index += len;
 }
 
 /*
@@ -562,13 +565,13 @@ static u8 fsl_elbc_read_byte(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
-	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+	struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
 
 	/* If there are still bytes in the FCM, then use the next byte. */
-	if (ctrl->index < ctrl->read_bytes)
-		return in_8(&ctrl->addr[ctrl->index++]);
+	if (elbc_fcm_ctrl->index < elbc_fcm_ctrl->read_bytes)
+		return in_8(&elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index++]);
 
-	dev_err(ctrl->dev, "read_byte beyond end of buffer\n");
+	dev_err(priv->dev, "read_byte beyond end of buffer\n");
 	return ERR_BYTE;
 }
 
@@ -579,78 +582,46 @@ static void fsl_elbc_read_buf(struct mtd_info *mtd, u8 *buf, int len)
 {
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
-	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+	struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
 	int avail;
 
 	if (len < 0)
 		return;
 
-	avail = min((unsigned int)len, ctrl->read_bytes - ctrl->index);
-	memcpy_fromio(buf, &ctrl->addr[ctrl->index], avail);
-	ctrl->index += avail;
+	avail = min((unsigned int)len,
+			elbc_fcm_ctrl->read_bytes - elbc_fcm_ctrl->index);
+	memcpy_fromio(buf, &elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index], avail);
+	elbc_fcm_ctrl->index += avail;
 
 	if (len > avail)
-		dev_err(ctrl->dev,
+		dev_err(priv->dev,
 		        "read_buf beyond end of buffer "
 		        "(%d requested, %d available)\n",
 		        len, avail);
 }
 
-/*
- * Verify buffer against the FCM Controller Data Buffer
- */
-static int fsl_elbc_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
-{
-	struct nand_chip *chip = mtd->priv;
-	struct fsl_elbc_mtd *priv = chip->priv;
-	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	int i;
-
-	if (len < 0) {
-		dev_err(ctrl->dev, "write_buf of %d bytes", len);
-		return -EINVAL;
-	}
-
-	if ((unsigned int)len > ctrl->read_bytes - ctrl->index) {
-		dev_err(ctrl->dev,
-		        "verify_buf beyond end of buffer "
-		        "(%d requested, %u available)\n",
-		        len, ctrl->read_bytes - ctrl->index);
-
-		ctrl->index = ctrl->read_bytes;
-		return -EINVAL;
-	}
-
-	for (i = 0; i < len; i++)
-		if (in_8(&ctrl->addr[ctrl->index + i]) != buf[i])
-			break;
-
-	ctrl->index += len;
-	return i == len && ctrl->status == LTESR_CC ? 0 : -EIO;
-}
-
 /* This function is called after Program and Erase Operations to
  * check for success or failure.
  */
 static int fsl_elbc_wait(struct mtd_info *mtd, struct nand_chip *chip)
 {
 	struct fsl_elbc_mtd *priv = chip->priv;
-	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+	struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
 
-	if (ctrl->status != LTESR_CC)
+	if (elbc_fcm_ctrl->status != LTESR_CC)
 		return NAND_STATUS_FAIL;
 
 	/* The chip always seems to report that it is
 	 * write-protected, even when it is not.
 	 */
-	return (ctrl->mdr & 0xff) | NAND_STATUS_WP;
+	return (elbc_fcm_ctrl->mdr & 0xff) | NAND_STATUS_WP;
 }
 
 static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
-	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+	struct fsl_lbc_ctrl *ctrl = priv->ctrl;
 	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 	unsigned int al;
 
@@ -661,45 +632,41 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
 	if (chip->pagemask & 0xff000000)
 		al++;
 
-	/* add to ECCM mode set in fsl_elbc_init */
-	priv->fmr |= (12 << FMR_CWTO_SHIFT) |  /* Timeout > 12 ms */
-	             (al << FMR_AL_SHIFT);
+	priv->fmr |= al << FMR_AL_SHIFT;
 
-	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->numchips = %d\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->numchips = %d\n",
 	        chip->numchips);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->chipsize = %lld\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->chipsize = %lld\n",
 	        chip->chipsize);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->pagemask = %8x\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->pagemask = %8x\n",
 	        chip->pagemask);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->chip_delay = %d\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->chip_delay = %d\n",
 	        chip->chip_delay);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->badblockpos = %d\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->badblockpos = %d\n",
 	        chip->badblockpos);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->chip_shift = %d\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->chip_shift = %d\n",
 	        chip->chip_shift);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->page_shift = %d\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->page_shift = %d\n",
 	        chip->page_shift);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->phys_erase_shift = %d\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->phys_erase_shift = %d\n",
 	        chip->phys_erase_shift);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->ecclayout = %p\n",
-	        chip->ecclayout);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->ecc.mode = %d\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.mode = %d\n",
 	        chip->ecc.mode);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->ecc.steps = %d\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.steps = %d\n",
 	        chip->ecc.steps);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->ecc.bytes = %d\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.bytes = %d\n",
 	        chip->ecc.bytes);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->ecc.total = %d\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.total = %d\n",
 	        chip->ecc.total);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->ecc.layout = %p\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.layout = %p\n",
 	        chip->ecc.layout);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->flags = %08x\n", mtd->flags);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->size = %lld\n", mtd->size);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->erasesize = %d\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: mtd->flags = %08x\n", mtd->flags);
+	dev_dbg(priv->dev, "fsl_elbc_init: mtd->size = %lld\n", mtd->size);
+	dev_dbg(priv->dev, "fsl_elbc_init: mtd->erasesize = %d\n",
 	        mtd->erasesize);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->writesize = %d\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: mtd->writesize = %d\n",
 	        mtd->writesize);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->oobsize = %d\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: mtd->oobsize = %d\n",
 	        mtd->oobsize);
 
 	/* adjust Option Register and ECC to match Flash page size */
@@ -716,10 +683,9 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
 			chip->ecc.layout = (priv->fmr & FMR_ECCM) ?
 			                   &fsl_elbc_oob_lp_eccm1 :
 			                   &fsl_elbc_oob_lp_eccm0;
-			chip->badblock_pattern = &largepage_memorybased;
 		}
 	} else {
-		dev_err(ctrl->dev,
+		dev_err(priv->dev,
 		        "fsl_elbc_init: page size %d is not supported\n",
 		        mtd->writesize);
 		return -1;
@@ -728,40 +694,53 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
 	return 0;
 }
 
-static int fsl_elbc_read_page(struct mtd_info *mtd,
-                              struct nand_chip *chip,
-			      uint8_t *buf,
-			      int page)
+static int fsl_elbc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+			      uint8_t *buf, int oob_required, int page)
 {
+	struct fsl_elbc_mtd *priv = chip->priv;
+	struct fsl_lbc_ctrl *ctrl = priv->ctrl;
+	struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = ctrl->nand;
+
 	fsl_elbc_read_buf(mtd, buf, mtd->writesize);
-	fsl_elbc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
+	if (oob_required)
+		fsl_elbc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
 
 	if (fsl_elbc_wait(mtd, chip) & NAND_STATUS_FAIL)
 		mtd->ecc_stats.failed++;
 
-	return 0;
+	return elbc_fcm_ctrl->max_bitflips;
 }
 
 /* ECC will be calculated automatically, and errors will be detected in
  * waitfunc.
  */
-static void fsl_elbc_write_page(struct mtd_info *mtd,
-                                struct nand_chip *chip,
-                                const uint8_t *buf)
+static int fsl_elbc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+				const uint8_t *buf, int oob_required)
 {
-	struct fsl_elbc_mtd *priv = chip->priv;
-	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+	fsl_elbc_write_buf(mtd, buf, mtd->writesize);
+	fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
 
+	return 0;
+}
+
+/* ECC will be calculated automatically, and errors will be detected in
+ * waitfunc.
+ */
+static int fsl_elbc_write_subpage(struct mtd_info *mtd, struct nand_chip *chip,
+				uint32_t offset, uint32_t data_len,
+				const uint8_t *buf, int oob_required)
+{
 	fsl_elbc_write_buf(mtd, buf, mtd->writesize);
 	fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
 
-	ctrl->oob_poi = chip->oob_poi;
+	return 0;
 }
 
 static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
 {
-	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+	struct fsl_lbc_ctrl *ctrl = priv->ctrl;
 	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+	struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = ctrl->nand;
 	struct nand_chip *chip = &priv->chip;
 
 	dev_dbg(priv->dev, "eLBC Set Information for bank %d\n", priv->bank);
@@ -770,15 +749,16 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
 	priv->mtd.priv = chip;
 	priv->mtd.owner = THIS_MODULE;
 
-	/* Set the ECCM according to the settings in bootloader.*/
-	priv->fmr = in_be32(&lbc->fmr) & FMR_ECCM;
+	/* set timeout to maximum */
+	priv->fmr = 15 << FMR_CWTO_SHIFT;
+	if (in_be32(&lbc->bank[priv->bank].or) & OR_FCM_PGS)
+		priv->fmr |= FMR_ECCM;
 
 	/* fill in nand_chip structure */
 	/* set up function call table */
 	chip->read_byte = fsl_elbc_read_byte;
 	chip->write_buf = fsl_elbc_write_buf;
 	chip->read_buf = fsl_elbc_read_buf;
-	chip->verify_buf = fsl_elbc_verify_buf;
 	chip->select_chip = fsl_elbc_select_chip;
 	chip->cmdfunc = fsl_elbc_cmdfunc;
 	chip->waitfunc = fsl_elbc_wait;
@@ -787,14 +767,14 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
 	chip->bbt_md = &bbt_mirror_descr;
 
 	/* set up nand options */
-	chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR |
-			NAND_USE_FLASH_BBT;
+	chip->bbt_options = NAND_BBT_USE_FLASH;
 
-	chip->controller = &ctrl->controller;
+	chip->controller = &elbc_fcm_ctrl->controller;
 	chip->priv = priv;
 
 	chip->ecc.read_page = fsl_elbc_read_page;
 	chip->ecc.write_page = fsl_elbc_write_page;
+	chip->ecc.write_subpage = fsl_elbc_write_subpage;
 
 	/* If CS Base Register selects full hardware ECC then use it */
 	if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) ==
@@ -805,6 +785,7 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
 				&fsl_elbc_oob_sp_eccm1 : &fsl_elbc_oob_sp_eccm0;
 		chip->ecc.size = 512;
 		chip->ecc.bytes = 3;
+		chip->ecc.strength = 1;
 	} else {
 		/* otherwise fall back to default software ECC */
 		chip->ecc.mode = NAND_ECC_SOFT;
@@ -815,8 +796,7 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
 
 static int fsl_elbc_chip_remove(struct fsl_elbc_mtd *priv)
 {
-	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-
+	struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
 	nand_release(&priv->mtd);
 
 	kfree(priv->mtd.name);
@@ -824,30 +804,37 @@ static int fsl_elbc_chip_remove(struct fsl_elbc_mtd *priv)
 	if (priv->vbase)
 		iounmap(priv->vbase);
 
-	ctrl->chips[priv->bank] = NULL;
+	elbc_fcm_ctrl->chips[priv->bank] = NULL;
 	kfree(priv);
-
 	return 0;
 }
 
-static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
-					 struct device_node *node)
+static DEFINE_MUTEX(fsl_elbc_nand_mutex);
+
+static int fsl_elbc_nand_probe(struct platform_device *pdev)
 {
-	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+	struct fsl_lbc_regs __iomem *lbc;
 	struct fsl_elbc_mtd *priv;
 	struct resource res;
-#ifdef CONFIG_MTD_PARTITIONS
+	struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl;
 	static const char *part_probe_types[]
-		= { "cmdlinepart", "RedBoot", NULL };
-	struct mtd_partition *parts;
-#endif
+		= { "cmdlinepart", "RedBoot", "ofpart", NULL };
 	int ret;
 	int bank;
+	struct device *dev;
+	struct device_node *node = pdev->dev.of_node;
+	struct mtd_part_parser_data ppdata;
+
+	ppdata.of_node = pdev->dev.of_node;
+	if (!fsl_lbc_ctrl_dev || !fsl_lbc_ctrl_dev->regs)
+		return -ENODEV;
+	lbc = fsl_lbc_ctrl_dev->regs;
+	dev = fsl_lbc_ctrl_dev->dev;
 
 	/* get, allocate and map the memory resource */
 	ret = of_address_to_resource(node, 0, &res);
 	if (ret) {
-		dev_err(ctrl->dev, "failed to get resource\n");
+		dev_err(dev, "failed to get resource\n");
 		return ret;
 	}
 
@@ -857,11 +844,11 @@ static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
 		    (in_be32(&lbc->bank[bank].br) & BR_MSEL) == BR_MS_FCM &&
 		    (in_be32(&lbc->bank[bank].br) &
 		     in_be32(&lbc->bank[bank].or) & BR_BA)
-		     == res.start)
+		     == fsl_lbc_addr(res.start))
 			break;
 
 	if (bank >= MAX_BANKS) {
-		dev_err(ctrl->dev, "address did not match any chip selects\n");
+		dev_err(dev, "address did not match any chip selects\n");
 		return -ENODEV;
 	}
 
@@ -869,19 +856,38 @@ static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
 	if (!priv)
 		return -ENOMEM;
 
-	ctrl->chips[bank] = priv;
+	mutex_lock(&fsl_elbc_nand_mutex);
+	if (!fsl_lbc_ctrl_dev->nand) {
+		elbc_fcm_ctrl = kzalloc(sizeof(*elbc_fcm_ctrl), GFP_KERNEL);
+		if (!elbc_fcm_ctrl) {
+			mutex_unlock(&fsl_elbc_nand_mutex);
+			ret = -ENOMEM;
+			goto err;
+		}
+		elbc_fcm_ctrl->counter++;
+
+		spin_lock_init(&elbc_fcm_ctrl->controller.lock);
+		init_waitqueue_head(&elbc_fcm_ctrl->controller.wq);
+		fsl_lbc_ctrl_dev->nand = elbc_fcm_ctrl;
+	} else {
+		elbc_fcm_ctrl = fsl_lbc_ctrl_dev->nand;
+	}
+	mutex_unlock(&fsl_elbc_nand_mutex);
+
+	elbc_fcm_ctrl->chips[bank] = priv;
 	priv->bank = bank;
-	priv->ctrl = ctrl;
-	priv->dev = ctrl->dev;
+	priv->ctrl = fsl_lbc_ctrl_dev;
+	priv->dev = &pdev->dev;
+	dev_set_drvdata(priv->dev, priv);
 
 	priv->vbase = ioremap(res.start, resource_size(&res));
 	if (!priv->vbase) {
-		dev_err(ctrl->dev, "failed to map chip region\n");
+		dev_err(dev, "failed to map chip region\n");
 		ret = -ENOMEM;
 		goto err;
 	}
 
-	priv->mtd.name = kasprintf(GFP_KERNEL, "%x.flash", (unsigned)res.start);
+	priv->mtd.name = kasprintf(GFP_KERNEL, "%llx.flash", (u64)res.start);
 	if (!priv->mtd.name) {
 		ret = -ENOMEM;
 		goto err;
@@ -903,26 +909,10 @@ static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
 	if (ret)
 		goto err;
 
-#ifdef CONFIG_MTD_PARTITIONS
 	/* First look for RedBoot table or partitions on the command
 	 * line, these take precedence over device tree information */
-	ret = parse_mtd_partitions(&priv->mtd, part_probe_types, &parts, 0);
-	if (ret < 0)
-		goto err;
-
-#ifdef CONFIG_MTD_OF_PARTS
-	if (ret == 0) {
-		ret = of_mtd_parse_partitions(priv->dev, node, &parts);
-		if (ret < 0)
-			goto err;
-	}
-#endif
-
-	if (ret > 0)
-		add_mtd_partitions(&priv->mtd, parts, ret);
-	else
-#endif
-		add_mtd_device(&priv->mtd);
+	mtd_device_parse_register(&priv->mtd, part_probe_types, &ppdata,
+				  NULL, 0);
 
 	printk(KERN_INFO "eLBC NAND device at 0x%llx, bank %d\n",
 	       (unsigned long long)res.start, priv->bank);
@@ -933,171 +923,41 @@ err:
 	return ret;
 }
 
-static int __devinit fsl_elbc_ctrl_init(struct fsl_elbc_ctrl *ctrl)
-{
-	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
-
-	/*
-	 * NAND transactions can tie up the bus for a long time, so set the
-	 * bus timeout to max by clearing LBCR[BMT] (highest base counter
-	 * value) and setting LBCR[BMTPS] to the highest prescaler value.
-	 */
-	clrsetbits_be32(&lbc->lbcr, LBCR_BMT, 15);
-
-	/* clear event registers */
-	setbits32(&lbc->ltesr, LTESR_NAND_MASK);
-	out_be32(&lbc->lteatr, 0);
-
-	/* Enable interrupts for any detected events */
-	out_be32(&lbc->lteir, LTESR_NAND_MASK);
-
-	ctrl->read_bytes = 0;
-	ctrl->index = 0;
-	ctrl->addr = NULL;
-
-	return 0;
-}
-
-static int fsl_elbc_ctrl_remove(struct of_device *ofdev)
+static int fsl_elbc_nand_remove(struct platform_device *pdev)
 {
-	struct fsl_elbc_ctrl *ctrl = dev_get_drvdata(&ofdev->dev);
-	int i;
-
-	for (i = 0; i < MAX_BANKS; i++)
-		if (ctrl->chips[i])
-			fsl_elbc_chip_remove(ctrl->chips[i]);
-
-	if (ctrl->irq)
-		free_irq(ctrl->irq, ctrl);
-
-	if (ctrl->regs)
-		iounmap(ctrl->regs);
-
-	dev_set_drvdata(&ofdev->dev, NULL);
-	kfree(ctrl);
-	return 0;
-}
-
-/* NOTE: This interrupt is also used to report other localbus events,
- * such as transaction errors on other chipselects.  If we want to
- * capture those, we'll need to move the IRQ code into a shared
- * LBC driver.
- */
-
-static irqreturn_t fsl_elbc_ctrl_irq(int irqno, void *data)
-{
-	struct fsl_elbc_ctrl *ctrl = data;
-	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
-	__be32 status = in_be32(&lbc->ltesr) & LTESR_NAND_MASK;
-
-	if (status) {
-		out_be32(&lbc->ltesr, status);
-		out_be32(&lbc->lteatr, 0);
+	struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = fsl_lbc_ctrl_dev->nand;
+	struct fsl_elbc_mtd *priv = dev_get_drvdata(&pdev->dev);
 
-		ctrl->irq_status = status;
-		smp_wmb();
-		wake_up(&ctrl->irq_wait);
-
-		return IRQ_HANDLED;
-	}
-
-	return IRQ_NONE;
-}
-
-/* fsl_elbc_ctrl_probe
- *
- * called by device layer when it finds a device matching
- * one our driver can handled. This code allocates all of
- * the resources needed for the controller only.  The
- * resources for the NAND banks themselves are allocated
- * in the chip probe function.
-*/
-
-static int __devinit fsl_elbc_ctrl_probe(struct of_device *ofdev,
-                                         const struct of_device_id *match)
-{
-	struct device_node *child;
-	struct fsl_elbc_ctrl *ctrl;
-	int ret;
-
-	ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL);
-	if (!ctrl)
-		return -ENOMEM;
-
-	dev_set_drvdata(&ofdev->dev, ctrl);
-
-	spin_lock_init(&ctrl->controller.lock);
-	init_waitqueue_head(&ctrl->controller.wq);
-	init_waitqueue_head(&ctrl->irq_wait);
-
-	ctrl->regs = of_iomap(ofdev->dev.of_node, 0);
-	if (!ctrl->regs) {
-		dev_err(&ofdev->dev, "failed to get memory region\n");
-		ret = -ENODEV;
-		goto err;
-	}
-
-	ctrl->irq = of_irq_to_resource(ofdev->dev.of_node, 0, NULL);
-	if (ctrl->irq == NO_IRQ) {
-		dev_err(&ofdev->dev, "failed to get irq resource\n");
-		ret = -ENODEV;
-		goto err;
-	}
-
-	ctrl->dev = &ofdev->dev;
-
-	ret = fsl_elbc_ctrl_init(ctrl);
-	if (ret < 0)
-		goto err;
+	fsl_elbc_chip_remove(priv);
 
-	ret = request_irq(ctrl->irq, fsl_elbc_ctrl_irq, 0, "fsl-elbc", ctrl);
-	if (ret != 0) {
-		dev_err(&ofdev->dev, "failed to install irq (%d)\n",
-		        ctrl->irq);
-		ret = ctrl->irq;
-		goto err;
+	mutex_lock(&fsl_elbc_nand_mutex);
+	elbc_fcm_ctrl->counter--;
+	if (!elbc_fcm_ctrl->counter) {
+		fsl_lbc_ctrl_dev->nand = NULL;
+		kfree(elbc_fcm_ctrl);
 	}
-
-	for_each_child_of_node(ofdev->dev.of_node, child)
-		if (of_device_is_compatible(child, "fsl,elbc-fcm-nand"))
-			fsl_elbc_chip_probe(ctrl, child);
+	mutex_unlock(&fsl_elbc_nand_mutex);
 
 	return 0;
 
-err:
-	fsl_elbc_ctrl_remove(ofdev);
-	return ret;
 }
 
-static const struct of_device_id fsl_elbc_match[] = {
-	{
-		.compatible = "fsl,elbc",
-	},
+static const struct of_device_id fsl_elbc_nand_match[] = {
+	{ .compatible = "fsl,elbc-fcm-nand", },
 	{}
 };
 
-static struct of_platform_driver fsl_elbc_ctrl_driver = {
+static struct platform_driver fsl_elbc_nand_driver = {
 	.driver = {
-		.name = "fsl-elbc",
+		.name = "fsl,elbc-fcm-nand",
 		.owner = THIS_MODULE,
-		.of_match_table = fsl_elbc_match,
+		.of_match_table = fsl_elbc_nand_match,
 	},
-	.probe = fsl_elbc_ctrl_probe,
-	.remove = fsl_elbc_ctrl_remove,
+	.probe = fsl_elbc_nand_probe,
+	.remove = fsl_elbc_nand_remove,
 };
 
-static int __init fsl_elbc_init(void)
-{
-	return of_register_platform_driver(&fsl_elbc_ctrl_driver);
-}
-
-static void __exit fsl_elbc_exit(void)
-{
-	of_unregister_platform_driver(&fsl_elbc_ctrl_driver);
-}
-
-module_init(fsl_elbc_init);
-module_exit(fsl_elbc_exit);
+module_platform_driver(fsl_elbc_nand_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Freescale");
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
new file mode 100644
index 00000000000..2338124dd05
--- /dev/null
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -0,0 +1,1181 @@
+/*
+ * Freescale Integrated Flash Controller NAND driver
+ *
+ * Copyright 2011-2012 Freescale Semiconductor, Inc
+ *
+ * Author: Dipen Dudhat <Dipen.Dudhat@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/fsl_ifc.h>
+
+#define FSL_IFC_V1_1_0	0x01010000
+#define ERR_BYTE		0xFF /* Value returned for read
+					bytes when read failed	*/
+#define IFC_TIMEOUT_MSECS	500  /* Maximum number of mSecs to wait
+					for IFC NAND Machine	*/
+
+struct fsl_ifc_ctrl;
+
+/* mtd information per set */
+struct fsl_ifc_mtd {
+	struct mtd_info mtd;
+	struct nand_chip chip;
+	struct fsl_ifc_ctrl *ctrl;
+
+	struct device *dev;
+	int bank;		/* Chip select bank number		*/
+	unsigned int bufnum_mask; /* bufnum = page & bufnum_mask */
+	u8 __iomem *vbase;      /* Chip select base virtual address	*/
+};
+
+/* overview of the fsl ifc controller */
+struct fsl_ifc_nand_ctrl {
+	struct nand_hw_control controller;
+	struct fsl_ifc_mtd *chips[FSL_IFC_BANK_COUNT];
+
+	void __iomem *addr;	/* Address of assigned IFC buffer	*/
+	unsigned int page;	/* Last page written to / read from	*/
+	unsigned int read_bytes;/* Number of bytes read during command	*/
+	unsigned int column;	/* Saved column from SEQIN		*/
+	unsigned int index;	/* Pointer to next byte to 'read'	*/
+	unsigned int oob;	/* Non zero if operating on OOB data	*/
+	unsigned int eccread;	/* Non zero for a full-page ECC read	*/
+	unsigned int counter;	/* counter for the initializations	*/
+	unsigned int max_bitflips;  /* Saved during READ0 cmd		*/
+};
+
+static struct fsl_ifc_nand_ctrl *ifc_nand_ctrl;
+
+/* 512-byte page with 4-bit ECC, 8-bit */
+static struct nand_ecclayout oob_512_8bit_ecc4 = {
+	.eccbytes = 8,
+	.eccpos = {8, 9, 10, 11, 12, 13, 14, 15},
+	.oobfree = { {0, 5}, {6, 2} },
+};
+
+/* 512-byte page with 4-bit ECC, 16-bit */
+static struct nand_ecclayout oob_512_16bit_ecc4 = {
+	.eccbytes = 8,
+	.eccpos = {8, 9, 10, 11, 12, 13, 14, 15},
+	.oobfree = { {2, 6}, },
+};
+
+/* 2048-byte page size with 4-bit ECC */
+static struct nand_ecclayout oob_2048_ecc4 = {
+	.eccbytes = 32,
+	.eccpos = {
+		8, 9, 10, 11, 12, 13, 14, 15,
+		16, 17, 18, 19, 20, 21, 22, 23,
+		24, 25, 26, 27, 28, 29, 30, 31,
+		32, 33, 34, 35, 36, 37, 38, 39,
+	},
+	.oobfree = { {2, 6}, {40, 24} },
+};
+
+/* 4096-byte page size with 4-bit ECC */
+static struct nand_ecclayout oob_4096_ecc4 = {
+	.eccbytes = 64,
+	.eccpos = {
+		8, 9, 10, 11, 12, 13, 14, 15,
+		16, 17, 18, 19, 20, 21, 22, 23,
+		24, 25, 26, 27, 28, 29, 30, 31,
+		32, 33, 34, 35, 36, 37, 38, 39,
+		40, 41, 42, 43, 44, 45, 46, 47,
+		48, 49, 50, 51, 52, 53, 54, 55,
+		56, 57, 58, 59, 60, 61, 62, 63,
+		64, 65, 66, 67, 68, 69, 70, 71,
+	},
+	.oobfree = { {2, 6}, {72, 56} },
+};
+
+/* 4096-byte page size with 8-bit ECC -- requires 218-byte OOB */
+static struct nand_ecclayout oob_4096_ecc8 = {
+	.eccbytes = 128,
+	.eccpos = {
+		8, 9, 10, 11, 12, 13, 14, 15,
+		16, 17, 18, 19, 20, 21, 22, 23,
+		24, 25, 26, 27, 28, 29, 30, 31,
+		32, 33, 34, 35, 36, 37, 38, 39,
+		40, 41, 42, 43, 44, 45, 46, 47,
+		48, 49, 50, 51, 52, 53, 54, 55,
+		56, 57, 58, 59, 60, 61, 62, 63,
+		64, 65, 66, 67, 68, 69, 70, 71,
+		72, 73, 74, 75, 76, 77, 78, 79,
+		80, 81, 82, 83, 84, 85, 86, 87,
+		88, 89, 90, 91, 92, 93, 94, 95,
+		96, 97, 98, 99, 100, 101, 102, 103,
+		104, 105, 106, 107, 108, 109, 110, 111,
+		112, 113, 114, 115, 116, 117, 118, 119,
+		120, 121, 122, 123, 124, 125, 126, 127,
+		128, 129, 130, 131, 132, 133, 134, 135,
+	},
+	.oobfree = { {2, 6}, {136, 82} },
+};
+
+/* 8192-byte page size with 4-bit ECC */
+static struct nand_ecclayout oob_8192_ecc4 = {
+	.eccbytes = 128,
+	.eccpos = {
+		8, 9, 10, 11, 12, 13, 14, 15,
+		16, 17, 18, 19, 20, 21, 22, 23,
+		24, 25, 26, 27, 28, 29, 30, 31,
+		32, 33, 34, 35, 36, 37, 38, 39,
+		40, 41, 42, 43, 44, 45, 46, 47,
+		48, 49, 50, 51, 52, 53, 54, 55,
+		56, 57, 58, 59, 60, 61, 62, 63,
+		64, 65, 66, 67, 68, 69, 70, 71,
+		72, 73, 74, 75, 76, 77, 78, 79,
+		80, 81, 82, 83, 84, 85, 86, 87,
+		88, 89, 90, 91, 92, 93, 94, 95,
+		96, 97, 98, 99, 100, 101, 102, 103,
+		104, 105, 106, 107, 108, 109, 110, 111,
+		112, 113, 114, 115, 116, 117, 118, 119,
+		120, 121, 122, 123, 124, 125, 126, 127,
+		128, 129, 130, 131, 132, 133, 134, 135,
+	},
+	.oobfree = { {2, 6}, {136, 208} },
+};
+
+/* 8192-byte page size with 8-bit ECC -- requires 218-byte OOB */
+static struct nand_ecclayout oob_8192_ecc8 = {
+	.eccbytes = 256,
+	.eccpos = {
+		8, 9, 10, 11, 12, 13, 14, 15,
+		16, 17, 18, 19, 20, 21, 22, 23,
+		24, 25, 26, 27, 28, 29, 30, 31,
+		32, 33, 34, 35, 36, 37, 38, 39,
+		40, 41, 42, 43, 44, 45, 46, 47,
+		48, 49, 50, 51, 52, 53, 54, 55,
+		56, 57, 58, 59, 60, 61, 62, 63,
+		64, 65, 66, 67, 68, 69, 70, 71,
+		72, 73, 74, 75, 76, 77, 78, 79,
+		80, 81, 82, 83, 84, 85, 86, 87,
+		88, 89, 90, 91, 92, 93, 94, 95,
+		96, 97, 98, 99, 100, 101, 102, 103,
+		104, 105, 106, 107, 108, 109, 110, 111,
+		112, 113, 114, 115, 116, 117, 118, 119,
+		120, 121, 122, 123, 124, 125, 126, 127,
+		128, 129, 130, 131, 132, 133, 134, 135,
+		136, 137, 138, 139, 140, 141, 142, 143,
+		144, 145, 146, 147, 148, 149, 150, 151,
+		152, 153, 154, 155, 156, 157, 158, 159,
+		160, 161, 162, 163, 164, 165, 166, 167,
+		168, 169, 170, 171, 172, 173, 174, 175,
+		176, 177, 178, 179, 180, 181, 182, 183,
+		184, 185, 186, 187, 188, 189, 190, 191,
+		192, 193, 194, 195, 196, 197, 198, 199,
+		200, 201, 202, 203, 204, 205, 206, 207,
+		208, 209, 210, 211, 212, 213, 214, 215,
+		216, 217, 218, 219, 220, 221, 222, 223,
+		224, 225, 226, 227, 228, 229, 230, 231,
+		232, 233, 234, 235, 236, 237, 238, 239,
+		240, 241, 242, 243, 244, 245, 246, 247,
+		248, 249, 250, 251, 252, 253, 254, 255,
+		256, 257, 258, 259, 260, 261, 262, 263,
+	},
+	.oobfree = { {2, 6}, {264, 80} },
+};
+
+/*
+ * Generic flash bbt descriptors
+ */
+static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
+static u8 mirror_pattern[] = {'1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+		   NAND_BBT_2BIT | NAND_BBT_VERSION,
+	.offs =	2, /* 0 on 8-bit small page */
+	.len = 4,
+	.veroffs = 6,
+	.maxblocks = 4,
+	.pattern = bbt_pattern,
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+		   NAND_BBT_2BIT | NAND_BBT_VERSION,
+	.offs =	2, /* 0 on 8-bit small page */
+	.len = 4,
+	.veroffs = 6,
+	.maxblocks = 4,
+	.pattern = mirror_pattern,
+};
+
+/*
+ * Set up the IFC hardware block and page address fields, and the ifc nand
+ * structure addr field to point to the correct IFC buffer in memory
+ */
+static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct fsl_ifc_mtd *priv = chip->priv;
+	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+	struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+	int buf_num;
+
+	ifc_nand_ctrl->page = page_addr;
+	/* Program ROW0/COL0 */
+	iowrite32be(page_addr, &ifc->ifc_nand.row0);
+	iowrite32be((oob ? IFC_NAND_COL_MS : 0) | column, &ifc->ifc_nand.col0);
+
+	buf_num = page_addr & priv->bufnum_mask;
+
+	ifc_nand_ctrl->addr = priv->vbase + buf_num * (mtd->writesize * 2);
+	ifc_nand_ctrl->index = column;
+
+	/* for OOB data point to the second half of the buffer */
+	if (oob)
+		ifc_nand_ctrl->index += mtd->writesize;
+}
+
+static int is_blank(struct mtd_info *mtd, unsigned int bufnum)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct fsl_ifc_mtd *priv = chip->priv;
+	u8 __iomem *addr = priv->vbase + bufnum * (mtd->writesize * 2);
+	u32 __iomem *mainarea = (u32 __iomem *)addr;
+	u8 __iomem *oob = addr + mtd->writesize;
+	int i;
+
+	for (i = 0; i < mtd->writesize / 4; i++) {
+		if (__raw_readl(&mainarea[i]) != 0xffffffff)
+			return 0;
+	}
+
+	for (i = 0; i < chip->ecc.layout->eccbytes; i++) {
+		int pos = chip->ecc.layout->eccpos[i];
+
+		if (__raw_readb(&oob[pos]) != 0xff)
+			return 0;
+	}
+
+	return 1;
+}
+
+/* returns nonzero if entire page is blank */
+static int check_read_ecc(struct mtd_info *mtd, struct fsl_ifc_ctrl *ctrl,
+			  u32 *eccstat, unsigned int bufnum)
+{
+	u32 reg = eccstat[bufnum / 4];
+	int errors;
+
+	errors = (reg >> ((3 - bufnum % 4) * 8)) & 15;
+
+	return errors;
+}
+
+/*
+ * execute IFC NAND command and wait for it to complete
+ */
+static void fsl_ifc_run_command(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct fsl_ifc_mtd *priv = chip->priv;
+	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+	struct fsl_ifc_nand_ctrl *nctrl = ifc_nand_ctrl;
+	struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+	u32 eccstat[4];
+	int i;
+
+	/* set the chip select for NAND Transaction */
+	iowrite32be(priv->bank << IFC_NAND_CSEL_SHIFT,
+		    &ifc->ifc_nand.nand_csel);
+
+	dev_vdbg(priv->dev,
+			"%s: fir0=%08x fcr0=%08x\n",
+			__func__,
+			ioread32be(&ifc->ifc_nand.nand_fir0),
+			ioread32be(&ifc->ifc_nand.nand_fcr0));
+
+	ctrl->nand_stat = 0;
+
+	/* start read/write seq */
+	iowrite32be(IFC_NAND_SEQ_STRT_FIR_STRT, &ifc->ifc_nand.nandseq_strt);
+
+	/* wait for command complete flag or timeout */
+	wait_event_timeout(ctrl->nand_wait, ctrl->nand_stat,
+			   IFC_TIMEOUT_MSECS * HZ/1000);
+
+	/* ctrl->nand_stat will be updated from IRQ context */
+	if (!ctrl->nand_stat)
+		dev_err(priv->dev, "Controller is not responding\n");
+	if (ctrl->nand_stat & IFC_NAND_EVTER_STAT_FTOER)
+		dev_err(priv->dev, "NAND Flash Timeout Error\n");
+	if (ctrl->nand_stat & IFC_NAND_EVTER_STAT_WPER)
+		dev_err(priv->dev, "NAND Flash Write Protect Error\n");
+
+	nctrl->max_bitflips = 0;
+
+	if (nctrl->eccread) {
+		int errors;
+		int bufnum = nctrl->page & priv->bufnum_mask;
+		int sector = bufnum * chip->ecc.steps;
+		int sector_end = sector + chip->ecc.steps - 1;
+
+		for (i = sector / 4; i <= sector_end / 4; i++)
+			eccstat[i] = ioread32be(&ifc->ifc_nand.nand_eccstat[i]);
+
+		for (i = sector; i <= sector_end; i++) {
+			errors = check_read_ecc(mtd, ctrl, eccstat, i);
+
+			if (errors == 15) {
+				/*
+				 * Uncorrectable error.
+				 * OK only if the whole page is blank.
+				 *
+				 * We disable ECCER reporting due to...
+				 * erratum IFC-A002770 -- so report it now if we
+				 * see an uncorrectable error in ECCSTAT.
+				 */
+				if (!is_blank(mtd, bufnum))
+					ctrl->nand_stat |=
+						IFC_NAND_EVTER_STAT_ECCER;
+				break;
+			}
+
+			mtd->ecc_stats.corrected += errors;
+			nctrl->max_bitflips = max_t(unsigned int,
+						    nctrl->max_bitflips,
+						    errors);
+		}
+
+		nctrl->eccread = 0;
+	}
+}
+
+static void fsl_ifc_do_read(struct nand_chip *chip,
+			    int oob,
+			    struct mtd_info *mtd)
+{
+	struct fsl_ifc_mtd *priv = chip->priv;
+	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+	struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+
+	/* Program FIR/IFC_NAND_FCR0 for Small/Large page */
+	if (mtd->writesize > 512) {
+		iowrite32be((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+			    (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+			    (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
+			    (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) |
+			    (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP4_SHIFT),
+			    &ifc->ifc_nand.nand_fir0);
+		iowrite32be(0x0, &ifc->ifc_nand.nand_fir1);
+
+		iowrite32be((NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) |
+			    (NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT),
+			    &ifc->ifc_nand.nand_fcr0);
+	} else {
+		iowrite32be((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+			    (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+			    (IFC_FIR_OP_RA0  << IFC_NAND_FIR0_OP2_SHIFT) |
+			    (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP3_SHIFT),
+			    &ifc->ifc_nand.nand_fir0);
+		iowrite32be(0x0, &ifc->ifc_nand.nand_fir1);
+
+		if (oob)
+			iowrite32be(NAND_CMD_READOOB <<
+				    IFC_NAND_FCR0_CMD0_SHIFT,
+				    &ifc->ifc_nand.nand_fcr0);
+		else
+			iowrite32be(NAND_CMD_READ0 <<
+				    IFC_NAND_FCR0_CMD0_SHIFT,
+				    &ifc->ifc_nand.nand_fcr0);
+	}
+}
+
+/* cmdfunc send commands to the IFC NAND Machine */
+static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
+			     int column, int page_addr) {
+	struct nand_chip *chip = mtd->priv;
+	struct fsl_ifc_mtd *priv = chip->priv;
+	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+	struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+
+	/* clear the read buffer */
+	ifc_nand_ctrl->read_bytes = 0;
+	if (command != NAND_CMD_PAGEPROG)
+		ifc_nand_ctrl->index = 0;
+
+	switch (command) {
+	/* READ0 read the entire buffer to use hardware ECC. */
+	case NAND_CMD_READ0:
+		iowrite32be(0, &ifc->ifc_nand.nand_fbcr);
+		set_addr(mtd, 0, page_addr, 0);
+
+		ifc_nand_ctrl->read_bytes = mtd->writesize + mtd->oobsize;
+		ifc_nand_ctrl->index += column;
+
+		if (chip->ecc.mode == NAND_ECC_HW)
+			ifc_nand_ctrl->eccread = 1;
+
+		fsl_ifc_do_read(chip, 0, mtd);
+		fsl_ifc_run_command(mtd);
+		return;
+
+	/* READOOB reads only the OOB because no ECC is performed. */
+	case NAND_CMD_READOOB:
+		iowrite32be(mtd->oobsize - column, &ifc->ifc_nand.nand_fbcr);
+		set_addr(mtd, column, page_addr, 1);
+
+		ifc_nand_ctrl->read_bytes = mtd->writesize + mtd->oobsize;
+
+		fsl_ifc_do_read(chip, 1, mtd);
+		fsl_ifc_run_command(mtd);
+
+		return;
+
+	case NAND_CMD_READID:
+	case NAND_CMD_PARAM: {
+		int timing = IFC_FIR_OP_RB;
+		if (command == NAND_CMD_PARAM)
+			timing = IFC_FIR_OP_RBCD;
+
+		iowrite32be((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+			    (IFC_FIR_OP_UA  << IFC_NAND_FIR0_OP1_SHIFT) |
+			    (timing << IFC_NAND_FIR0_OP2_SHIFT),
+			    &ifc->ifc_nand.nand_fir0);
+		iowrite32be(command << IFC_NAND_FCR0_CMD0_SHIFT,
+			    &ifc->ifc_nand.nand_fcr0);
+		iowrite32be(column, &ifc->ifc_nand.row3);
+
+		/*
+		 * although currently it's 8 bytes for READID, we always read
+		 * the maximum 256 bytes(for PARAM)
+		 */
+		iowrite32be(256, &ifc->ifc_nand.nand_fbcr);
+		ifc_nand_ctrl->read_bytes = 256;
+
+		set_addr(mtd, 0, 0, 0);
+		fsl_ifc_run_command(mtd);
+		return;
+	}
+
+	/* ERASE1 stores the block and page address */
+	case NAND_CMD_ERASE1:
+		set_addr(mtd, 0, page_addr, 0);
+		return;
+
+	/* ERASE2 uses the block and page address from ERASE1 */
+	case NAND_CMD_ERASE2:
+		iowrite32be((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+			    (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+			    (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP2_SHIFT),
+			    &ifc->ifc_nand.nand_fir0);
+
+		iowrite32be((NAND_CMD_ERASE1 << IFC_NAND_FCR0_CMD0_SHIFT) |
+			    (NAND_CMD_ERASE2 << IFC_NAND_FCR0_CMD1_SHIFT),
+			    &ifc->ifc_nand.nand_fcr0);
+
+		iowrite32be(0, &ifc->ifc_nand.nand_fbcr);
+		ifc_nand_ctrl->read_bytes = 0;
+		fsl_ifc_run_command(mtd);
+		return;
+
+	/* SEQIN sets up the addr buffer and all registers except the length */
+	case NAND_CMD_SEQIN: {
+		u32 nand_fcr0;
+		ifc_nand_ctrl->column = column;
+		ifc_nand_ctrl->oob = 0;
+
+		if (mtd->writesize > 512) {
+			nand_fcr0 =
+				(NAND_CMD_SEQIN << IFC_NAND_FCR0_CMD0_SHIFT) |
+				(NAND_CMD_STATUS << IFC_NAND_FCR0_CMD1_SHIFT) |
+				(NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD2_SHIFT);
+
+			iowrite32be(
+				 (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+				 (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+				 (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
+				 (IFC_FIR_OP_WBCD  << IFC_NAND_FIR0_OP3_SHIFT) |
+				 (IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP4_SHIFT),
+				 &ifc->ifc_nand.nand_fir0);
+			iowrite32be(
+				 (IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT) |
+				 (IFC_FIR_OP_RDSTAT <<
+					IFC_NAND_FIR1_OP6_SHIFT) |
+				 (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP7_SHIFT),
+				 &ifc->ifc_nand.nand_fir1);
+		} else {
+			nand_fcr0 = ((NAND_CMD_PAGEPROG <<
+					IFC_NAND_FCR0_CMD1_SHIFT) |
+				    (NAND_CMD_SEQIN <<
+					IFC_NAND_FCR0_CMD2_SHIFT) |
+				    (NAND_CMD_STATUS <<
+					IFC_NAND_FCR0_CMD3_SHIFT));
+
+			iowrite32be(
+				(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+				(IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP1_SHIFT) |
+				(IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP2_SHIFT) |
+				(IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP3_SHIFT) |
+				(IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP4_SHIFT),
+				&ifc->ifc_nand.nand_fir0);
+			iowrite32be(
+				 (IFC_FIR_OP_CMD1 << IFC_NAND_FIR1_OP5_SHIFT) |
+				 (IFC_FIR_OP_CW3 << IFC_NAND_FIR1_OP6_SHIFT) |
+				 (IFC_FIR_OP_RDSTAT <<
+					IFC_NAND_FIR1_OP7_SHIFT) |
+				 (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP8_SHIFT),
+				  &ifc->ifc_nand.nand_fir1);
+
+			if (column >= mtd->writesize)
+				nand_fcr0 |=
+				NAND_CMD_READOOB << IFC_NAND_FCR0_CMD0_SHIFT;
+			else
+				nand_fcr0 |=
+				NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT;
+		}
+
+		if (column >= mtd->writesize) {
+			/* OOB area --> READOOB */
+			column -= mtd->writesize;
+			ifc_nand_ctrl->oob = 1;
+		}
+		iowrite32be(nand_fcr0, &ifc->ifc_nand.nand_fcr0);
+		set_addr(mtd, column, page_addr, ifc_nand_ctrl->oob);
+		return;
+	}
+
+	/* PAGEPROG reuses all of the setup from SEQIN and adds the length */
+	case NAND_CMD_PAGEPROG: {
+		if (ifc_nand_ctrl->oob) {
+			iowrite32be(ifc_nand_ctrl->index -
+				    ifc_nand_ctrl->column,
+				    &ifc->ifc_nand.nand_fbcr);
+		} else {
+			iowrite32be(0, &ifc->ifc_nand.nand_fbcr);
+		}
+
+		fsl_ifc_run_command(mtd);
+		return;
+	}
+
+	case NAND_CMD_STATUS:
+		iowrite32be((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+			    (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP1_SHIFT),
+			    &ifc->ifc_nand.nand_fir0);
+		iowrite32be(NAND_CMD_STATUS << IFC_NAND_FCR0_CMD0_SHIFT,
+			    &ifc->ifc_nand.nand_fcr0);
+		iowrite32be(1, &ifc->ifc_nand.nand_fbcr);
+		set_addr(mtd, 0, 0, 0);
+		ifc_nand_ctrl->read_bytes = 1;
+
+		fsl_ifc_run_command(mtd);
+
+		/*
+		 * The chip always seems to report that it is
+		 * write-protected, even when it is not.
+		 */
+		if (chip->options & NAND_BUSWIDTH_16)
+			setbits16(ifc_nand_ctrl->addr, NAND_STATUS_WP);
+		else
+			setbits8(ifc_nand_ctrl->addr, NAND_STATUS_WP);
+		return;
+
+	case NAND_CMD_RESET:
+		iowrite32be(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT,
+			    &ifc->ifc_nand.nand_fir0);
+		iowrite32be(NAND_CMD_RESET << IFC_NAND_FCR0_CMD0_SHIFT,
+			    &ifc->ifc_nand.nand_fcr0);
+		fsl_ifc_run_command(mtd);
+		return;
+
+	default:
+		dev_err(priv->dev, "%s: error, unsupported command 0x%x.\n",
+					__func__, command);
+	}
+}
+
+static void fsl_ifc_select_chip(struct mtd_info *mtd, int chip)
+{
+	/* The hardware does not seem to support multiple
+	 * chips per bank.
+	 */
+}
+
+/*
+ * Write buf to the IFC NAND Controller Data Buffer
+ */
+static void fsl_ifc_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct fsl_ifc_mtd *priv = chip->priv;
+	unsigned int bufsize = mtd->writesize + mtd->oobsize;
+
+	if (len <= 0) {
+		dev_err(priv->dev, "%s: len %d bytes", __func__, len);
+		return;
+	}
+
+	if ((unsigned int)len > bufsize - ifc_nand_ctrl->index) {
+		dev_err(priv->dev,
+			"%s: beyond end of buffer (%d requested, %u available)\n",
+			__func__, len, bufsize - ifc_nand_ctrl->index);
+		len = bufsize - ifc_nand_ctrl->index;
+	}
+
+	memcpy_toio(ifc_nand_ctrl->addr + ifc_nand_ctrl->index, buf, len);
+	ifc_nand_ctrl->index += len;
+}
+
+/*
+ * Read a byte from either the IFC hardware buffer
+ * read function for 8-bit buswidth
+ */
+static uint8_t fsl_ifc_read_byte(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct fsl_ifc_mtd *priv = chip->priv;
+	unsigned int offset;
+
+	/*
+	 * If there are still bytes in the IFC buffer, then use the
+	 * next byte.
+	 */
+	if (ifc_nand_ctrl->index < ifc_nand_ctrl->read_bytes) {
+		offset = ifc_nand_ctrl->index++;
+		return in_8(ifc_nand_ctrl->addr + offset);
+	}
+
+	dev_err(priv->dev, "%s: beyond end of buffer\n", __func__);
+	return ERR_BYTE;
+}
+
+/*
+ * Read two bytes from the IFC hardware buffer
+ * read function for 16-bit buswith
+ */
+static uint8_t fsl_ifc_read_byte16(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct fsl_ifc_mtd *priv = chip->priv;
+	uint16_t data;
+
+	/*
+	 * If there are still bytes in the IFC buffer, then use the
+	 * next byte.
+	 */
+	if (ifc_nand_ctrl->index < ifc_nand_ctrl->read_bytes) {
+		data = in_be16(ifc_nand_ctrl->addr + ifc_nand_ctrl->index);
+		ifc_nand_ctrl->index += 2;
+		return (uint8_t) data;
+	}
+
+	dev_err(priv->dev, "%s: beyond end of buffer\n", __func__);
+	return ERR_BYTE;
+}
+
+/*
+ * Read from the IFC Controller Data Buffer
+ */
+static void fsl_ifc_read_buf(struct mtd_info *mtd, u8 *buf, int len)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct fsl_ifc_mtd *priv = chip->priv;
+	int avail;
+
+	if (len < 0) {
+		dev_err(priv->dev, "%s: len %d bytes", __func__, len);
+		return;
+	}
+
+	avail = min((unsigned int)len,
+			ifc_nand_ctrl->read_bytes - ifc_nand_ctrl->index);
+	memcpy_fromio(buf, ifc_nand_ctrl->addr + ifc_nand_ctrl->index, avail);
+	ifc_nand_ctrl->index += avail;
+
+	if (len > avail)
+		dev_err(priv->dev,
+			"%s: beyond end of buffer (%d requested, %d available)\n",
+			__func__, len, avail);
+}
+
+/*
+ * This function is called after Program and Erase Operations to
+ * check for success or failure.
+ */
+static int fsl_ifc_wait(struct mtd_info *mtd, struct nand_chip *chip)
+{
+	struct fsl_ifc_mtd *priv = chip->priv;
+	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+	struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+	u32 nand_fsr;
+
+	/* Use READ_STATUS command, but wait for the device to be ready */
+	iowrite32be((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+		    (IFC_FIR_OP_RDSTAT << IFC_NAND_FIR0_OP1_SHIFT),
+		    &ifc->ifc_nand.nand_fir0);
+	iowrite32be(NAND_CMD_STATUS << IFC_NAND_FCR0_CMD0_SHIFT,
+		    &ifc->ifc_nand.nand_fcr0);
+	iowrite32be(1, &ifc->ifc_nand.nand_fbcr);
+	set_addr(mtd, 0, 0, 0);
+	ifc_nand_ctrl->read_bytes = 1;
+
+	fsl_ifc_run_command(mtd);
+
+	nand_fsr = ioread32be(&ifc->ifc_nand.nand_fsr);
+
+	/*
+	 * The chip always seems to report that it is
+	 * write-protected, even when it is not.
+	 */
+	return nand_fsr | NAND_STATUS_WP;
+}
+
+static int fsl_ifc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+			     uint8_t *buf, int oob_required, int page)
+{
+	struct fsl_ifc_mtd *priv = chip->priv;
+	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+	struct fsl_ifc_nand_ctrl *nctrl = ifc_nand_ctrl;
+
+	fsl_ifc_read_buf(mtd, buf, mtd->writesize);
+	if (oob_required)
+		fsl_ifc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	if (ctrl->nand_stat & IFC_NAND_EVTER_STAT_ECCER)
+		dev_err(priv->dev, "NAND Flash ECC Uncorrectable Error\n");
+
+	if (ctrl->nand_stat != IFC_NAND_EVTER_STAT_OPC)
+		mtd->ecc_stats.failed++;
+
+	return nctrl->max_bitflips;
+}
+
+/* ECC will be calculated automatically, and errors will be detected in
+ * waitfunc.
+ */
+static int fsl_ifc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+			       const uint8_t *buf, int oob_required)
+{
+	fsl_ifc_write_buf(mtd, buf, mtd->writesize);
+	fsl_ifc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	return 0;
+}
+
+static int fsl_ifc_chip_init_tail(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct fsl_ifc_mtd *priv = chip->priv;
+
+	dev_dbg(priv->dev, "%s: nand->numchips = %d\n", __func__,
+							chip->numchips);
+	dev_dbg(priv->dev, "%s: nand->chipsize = %lld\n", __func__,
+							chip->chipsize);
+	dev_dbg(priv->dev, "%s: nand->pagemask = %8x\n", __func__,
+							chip->pagemask);
+	dev_dbg(priv->dev, "%s: nand->chip_delay = %d\n", __func__,
+							chip->chip_delay);
+	dev_dbg(priv->dev, "%s: nand->badblockpos = %d\n", __func__,
+							chip->badblockpos);
+	dev_dbg(priv->dev, "%s: nand->chip_shift = %d\n", __func__,
+							chip->chip_shift);
+	dev_dbg(priv->dev, "%s: nand->page_shift = %d\n", __func__,
+							chip->page_shift);
+	dev_dbg(priv->dev, "%s: nand->phys_erase_shift = %d\n", __func__,
+							chip->phys_erase_shift);
+	dev_dbg(priv->dev, "%s: nand->ecc.mode = %d\n", __func__,
+							chip->ecc.mode);
+	dev_dbg(priv->dev, "%s: nand->ecc.steps = %d\n", __func__,
+							chip->ecc.steps);
+	dev_dbg(priv->dev, "%s: nand->ecc.bytes = %d\n", __func__,
+							chip->ecc.bytes);
+	dev_dbg(priv->dev, "%s: nand->ecc.total = %d\n", __func__,
+							chip->ecc.total);
+	dev_dbg(priv->dev, "%s: nand->ecc.layout = %p\n", __func__,
+							chip->ecc.layout);
+	dev_dbg(priv->dev, "%s: mtd->flags = %08x\n", __func__, mtd->flags);
+	dev_dbg(priv->dev, "%s: mtd->size = %lld\n", __func__, mtd->size);
+	dev_dbg(priv->dev, "%s: mtd->erasesize = %d\n", __func__,
+							mtd->erasesize);
+	dev_dbg(priv->dev, "%s: mtd->writesize = %d\n", __func__,
+							mtd->writesize);
+	dev_dbg(priv->dev, "%s: mtd->oobsize = %d\n", __func__,
+							mtd->oobsize);
+
+	return 0;
+}
+
+static void fsl_ifc_sram_init(struct fsl_ifc_mtd *priv)
+{
+	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+	struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+	uint32_t csor = 0, csor_8k = 0, csor_ext = 0;
+	uint32_t cs = priv->bank;
+
+	/* Save CSOR and CSOR_ext */
+	csor = ioread32be(&ifc->csor_cs[cs].csor);
+	csor_ext = ioread32be(&ifc->csor_cs[cs].csor_ext);
+
+	/* chage PageSize 8K and SpareSize 1K*/
+	csor_8k = (csor & ~(CSOR_NAND_PGS_MASK)) | 0x0018C000;
+	iowrite32be(csor_8k, &ifc->csor_cs[cs].csor);
+	iowrite32be(0x0000400, &ifc->csor_cs[cs].csor_ext);
+
+	/* READID */
+	iowrite32be((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+		    (IFC_FIR_OP_UA  << IFC_NAND_FIR0_OP1_SHIFT) |
+		    (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT),
+		    &ifc->ifc_nand.nand_fir0);
+	iowrite32be(NAND_CMD_READID << IFC_NAND_FCR0_CMD0_SHIFT,
+		    &ifc->ifc_nand.nand_fcr0);
+	iowrite32be(0x0, &ifc->ifc_nand.row3);
+
+	iowrite32be(0x0, &ifc->ifc_nand.nand_fbcr);
+
+	/* Program ROW0/COL0 */
+	iowrite32be(0x0, &ifc->ifc_nand.row0);
+	iowrite32be(0x0, &ifc->ifc_nand.col0);
+
+	/* set the chip select for NAND Transaction */
+	iowrite32be(cs << IFC_NAND_CSEL_SHIFT, &ifc->ifc_nand.nand_csel);
+
+	/* start read seq */
+	iowrite32be(IFC_NAND_SEQ_STRT_FIR_STRT, &ifc->ifc_nand.nandseq_strt);
+
+	/* wait for command complete flag or timeout */
+	wait_event_timeout(ctrl->nand_wait, ctrl->nand_stat,
+			   IFC_TIMEOUT_MSECS * HZ/1000);
+
+	if (ctrl->nand_stat != IFC_NAND_EVTER_STAT_OPC)
+		printk(KERN_ERR "fsl-ifc: Failed to Initialise SRAM\n");
+
+	/* Restore CSOR and CSOR_ext */
+	iowrite32be(csor, &ifc->csor_cs[cs].csor);
+	iowrite32be(csor_ext, &ifc->csor_cs[cs].csor_ext);
+}
+
+static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
+{
+	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+	struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+	struct nand_chip *chip = &priv->chip;
+	struct nand_ecclayout *layout;
+	u32 csor, ver;
+
+	/* Fill in fsl_ifc_mtd structure */
+	priv->mtd.priv = chip;
+	priv->mtd.owner = THIS_MODULE;
+
+	/* fill in nand_chip structure */
+	/* set up function call table */
+	if ((ioread32be(&ifc->cspr_cs[priv->bank].cspr)) & CSPR_PORT_SIZE_16)
+		chip->read_byte = fsl_ifc_read_byte16;
+	else
+		chip->read_byte = fsl_ifc_read_byte;
+
+	chip->write_buf = fsl_ifc_write_buf;
+	chip->read_buf = fsl_ifc_read_buf;
+	chip->select_chip = fsl_ifc_select_chip;
+	chip->cmdfunc = fsl_ifc_cmdfunc;
+	chip->waitfunc = fsl_ifc_wait;
+
+	chip->bbt_td = &bbt_main_descr;
+	chip->bbt_md = &bbt_mirror_descr;
+
+	iowrite32be(0x0, &ifc->ifc_nand.ncfgr);
+
+	/* set up nand options */
+	chip->bbt_options = NAND_BBT_USE_FLASH;
+	chip->options = NAND_NO_SUBPAGE_WRITE;
+
+	if (ioread32be(&ifc->cspr_cs[priv->bank].cspr) & CSPR_PORT_SIZE_16) {
+		chip->read_byte = fsl_ifc_read_byte16;
+		chip->options |= NAND_BUSWIDTH_16;
+	} else {
+		chip->read_byte = fsl_ifc_read_byte;
+	}
+
+	chip->controller = &ifc_nand_ctrl->controller;
+	chip->priv = priv;
+
+	chip->ecc.read_page = fsl_ifc_read_page;
+	chip->ecc.write_page = fsl_ifc_write_page;
+
+	csor = ioread32be(&ifc->csor_cs[priv->bank].csor);
+
+	/* Hardware generates ECC per 512 Bytes */
+	chip->ecc.size = 512;
+	chip->ecc.bytes = 8;
+	chip->ecc.strength = 4;
+
+	switch (csor & CSOR_NAND_PGS_MASK) {
+	case CSOR_NAND_PGS_512:
+		if (chip->options & NAND_BUSWIDTH_16) {
+			layout = &oob_512_16bit_ecc4;
+		} else {
+			layout = &oob_512_8bit_ecc4;
+
+			/* Avoid conflict with bad block marker */
+			bbt_main_descr.offs = 0;
+			bbt_mirror_descr.offs = 0;
+		}
+
+		priv->bufnum_mask = 15;
+		break;
+
+	case CSOR_NAND_PGS_2K:
+		layout = &oob_2048_ecc4;
+		priv->bufnum_mask = 3;
+		break;
+
+	case CSOR_NAND_PGS_4K:
+		if ((csor & CSOR_NAND_ECC_MODE_MASK) ==
+		    CSOR_NAND_ECC_MODE_4) {
+			layout = &oob_4096_ecc4;
+		} else {
+			layout = &oob_4096_ecc8;
+			chip->ecc.bytes = 16;
+			chip->ecc.strength = 8;
+		}
+
+		priv->bufnum_mask = 1;
+		break;
+
+	case CSOR_NAND_PGS_8K:
+		if ((csor & CSOR_NAND_ECC_MODE_MASK) ==
+		    CSOR_NAND_ECC_MODE_4) {
+			layout = &oob_8192_ecc4;
+		} else {
+			layout = &oob_8192_ecc8;
+			chip->ecc.bytes = 16;
+			chip->ecc.strength = 8;
+		}
+
+		priv->bufnum_mask = 0;
+	break;
+
+	default:
+		dev_err(priv->dev, "bad csor %#x: bad page size\n", csor);
+		return -ENODEV;
+	}
+
+	/* Must also set CSOR_NAND_ECC_ENC_EN if DEC_EN set */
+	if (csor & CSOR_NAND_ECC_DEC_EN) {
+		chip->ecc.mode = NAND_ECC_HW;
+		chip->ecc.layout = layout;
+	} else {
+		chip->ecc.mode = NAND_ECC_SOFT;
+	}
+
+	ver = ioread32be(&ifc->ifc_rev);
+	if (ver == FSL_IFC_V1_1_0)
+		fsl_ifc_sram_init(priv);
+
+	return 0;
+}
+
+static int fsl_ifc_chip_remove(struct fsl_ifc_mtd *priv)
+{
+	nand_release(&priv->mtd);
+
+	kfree(priv->mtd.name);
+
+	if (priv->vbase)
+		iounmap(priv->vbase);
+
+	ifc_nand_ctrl->chips[priv->bank] = NULL;
+
+	return 0;
+}
+
+static int match_bank(struct fsl_ifc_regs __iomem *ifc, int bank,
+		      phys_addr_t addr)
+{
+	u32 cspr = ioread32be(&ifc->cspr_cs[bank].cspr);
+
+	if (!(cspr & CSPR_V))
+		return 0;
+	if ((cspr & CSPR_MSEL) != CSPR_MSEL_NAND)
+		return 0;
+
+	return (cspr & CSPR_BA) == convert_ifc_address(addr);
+}
+
+static DEFINE_MUTEX(fsl_ifc_nand_mutex);
+
+static int fsl_ifc_nand_probe(struct platform_device *dev)
+{
+	struct fsl_ifc_regs __iomem *ifc;
+	struct fsl_ifc_mtd *priv;
+	struct resource res;
+	static const char *part_probe_types[]
+		= { "cmdlinepart", "RedBoot", "ofpart", NULL };
+	int ret;
+	int bank;
+	struct device_node *node = dev->dev.of_node;
+	struct mtd_part_parser_data ppdata;
+
+	ppdata.of_node = dev->dev.of_node;
+	if (!fsl_ifc_ctrl_dev || !fsl_ifc_ctrl_dev->regs)
+		return -ENODEV;
+	ifc = fsl_ifc_ctrl_dev->regs;
+
+	/* get, allocate and map the memory resource */
+	ret = of_address_to_resource(node, 0, &res);
+	if (ret) {
+		dev_err(&dev->dev, "%s: failed to get resource\n", __func__);
+		return ret;
+	}
+
+	/* find which chip select it is connected to */
+	for (bank = 0; bank < FSL_IFC_BANK_COUNT; bank++) {
+		if (match_bank(ifc, bank, res.start))
+			break;
+	}
+
+	if (bank >= FSL_IFC_BANK_COUNT) {
+		dev_err(&dev->dev, "%s: address did not match any chip selects\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	priv = devm_kzalloc(&dev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	mutex_lock(&fsl_ifc_nand_mutex);
+	if (!fsl_ifc_ctrl_dev->nand) {
+		ifc_nand_ctrl = kzalloc(sizeof(*ifc_nand_ctrl), GFP_KERNEL);
+		if (!ifc_nand_ctrl) {
+			mutex_unlock(&fsl_ifc_nand_mutex);
+			return -ENOMEM;
+		}
+
+		ifc_nand_ctrl->read_bytes = 0;
+		ifc_nand_ctrl->index = 0;
+		ifc_nand_ctrl->addr = NULL;
+		fsl_ifc_ctrl_dev->nand = ifc_nand_ctrl;
+
+		spin_lock_init(&ifc_nand_ctrl->controller.lock);
+		init_waitqueue_head(&ifc_nand_ctrl->controller.wq);
+	} else {
+		ifc_nand_ctrl = fsl_ifc_ctrl_dev->nand;
+	}
+	mutex_unlock(&fsl_ifc_nand_mutex);
+
+	ifc_nand_ctrl->chips[bank] = priv;
+	priv->bank = bank;
+	priv->ctrl = fsl_ifc_ctrl_dev;
+	priv->dev = &dev->dev;
+
+	priv->vbase = ioremap(res.start, resource_size(&res));
+	if (!priv->vbase) {
+		dev_err(priv->dev, "%s: failed to map chip region\n", __func__);
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	dev_set_drvdata(priv->dev, priv);
+
+	iowrite32be(IFC_NAND_EVTER_EN_OPC_EN |
+		    IFC_NAND_EVTER_EN_FTOER_EN |
+		    IFC_NAND_EVTER_EN_WPER_EN,
+		    &ifc->ifc_nand.nand_evter_en);
+
+	/* enable NAND Machine Interrupts */
+	iowrite32be(IFC_NAND_EVTER_INTR_OPCIR_EN |
+		    IFC_NAND_EVTER_INTR_FTOERIR_EN |
+		    IFC_NAND_EVTER_INTR_WPERIR_EN,
+		    &ifc->ifc_nand.nand_evter_intr_en);
+	priv->mtd.name = kasprintf(GFP_KERNEL, "%llx.flash", (u64)res.start);
+	if (!priv->mtd.name) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	ret = fsl_ifc_chip_init(priv);
+	if (ret)
+		goto err;
+
+	ret = nand_scan_ident(&priv->mtd, 1, NULL);
+	if (ret)
+		goto err;
+
+	ret = fsl_ifc_chip_init_tail(&priv->mtd);
+	if (ret)
+		goto err;
+
+	ret = nand_scan_tail(&priv->mtd);
+	if (ret)
+		goto err;
+
+	/* First look for RedBoot table or partitions on the command
+	 * line, these take precedence over device tree information */
+	mtd_device_parse_register(&priv->mtd, part_probe_types, &ppdata,
+						NULL, 0);
+
+	dev_info(priv->dev, "IFC NAND device at 0x%llx, bank %d\n",
+		 (unsigned long long)res.start, priv->bank);
+	return 0;
+
+err:
+	fsl_ifc_chip_remove(priv);
+	return ret;
+}
+
+static int fsl_ifc_nand_remove(struct platform_device *dev)
+{
+	struct fsl_ifc_mtd *priv = dev_get_drvdata(&dev->dev);
+
+	fsl_ifc_chip_remove(priv);
+
+	mutex_lock(&fsl_ifc_nand_mutex);
+	ifc_nand_ctrl->counter--;
+	if (!ifc_nand_ctrl->counter) {
+		fsl_ifc_ctrl_dev->nand = NULL;
+		kfree(ifc_nand_ctrl);
+	}
+	mutex_unlock(&fsl_ifc_nand_mutex);
+
+	return 0;
+}
+
+static const struct of_device_id fsl_ifc_nand_match[] = {
+	{
+		.compatible = "fsl,ifc-nand",
+	},
+	{}
+};
+
+static struct platform_driver fsl_ifc_nand_driver = {
+	.driver = {
+		.name	= "fsl,ifc-nand",
+		.owner = THIS_MODULE,
+		.of_match_table = fsl_ifc_nand_match,
+	},
+	.probe       = fsl_ifc_nand_probe,
+	.remove      = fsl_ifc_nand_remove,
+};
+
+module_platform_driver(fsl_ifc_nand_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Freescale");
+MODULE_DESCRIPTION("Freescale Integrated Flash Controller MTD NAND driver");
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
index 1312eda57ba..4d203e84e8c 100644
--- a/drivers/mtd/nand/fsl_upm.c
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -18,6 +18,7 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/mtd.h>
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/of_gpio.h>
 #include <linux/io.h>
@@ -33,10 +34,7 @@ struct fsl_upm_nand {
 	struct mtd_info mtd;
 	struct nand_chip chip;
 	int last_ctrl;
-#ifdef CONFIG_MTD_PARTITIONS
 	struct mtd_partition *parts;
-#endif
-
 	struct fsl_upm upm;
 	uint8_t upm_addr_offset;
 	uint8_t upm_cmd_offset;
@@ -155,15 +153,13 @@ static void fun_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
 		fun_wait_rnb(fun);
 }
 
-static int __devinit fun_chip_init(struct fsl_upm_nand *fun,
-				   const struct device_node *upm_np,
-				   const struct resource *io_res)
+static int fun_chip_init(struct fsl_upm_nand *fun,
+			 const struct device_node *upm_np,
+			 const struct resource *io_res)
 {
 	int ret;
 	struct device_node *flash_np;
-#ifdef CONFIG_MTD_PARTITIONS
-	static const char *part_types[] = { "cmdlinepart", NULL, };
-#endif
+	struct mtd_part_parser_data ppdata;
 
 	fun->chip.IO_ADDR_R = fun->io_base;
 	fun->chip.IO_ADDR_W = fun->io_base;
@@ -186,7 +182,7 @@ static int __devinit fun_chip_init(struct fsl_upm_nand *fun,
 	if (!flash_np)
 		return -ENODEV;
 
-	fun->mtd.name = kasprintf(GFP_KERNEL, "%x.%s", io_res->start,
+	fun->mtd.name = kasprintf(GFP_KERNEL, "0x%llx.%s", (u64)io_res->start,
 				  flash_np->name);
 	if (!fun->mtd.name) {
 		ret = -ENOMEM;
@@ -197,32 +193,20 @@ static int __devinit fun_chip_init(struct fsl_upm_nand *fun,
 	if (ret)
 		goto err;
 
-#ifdef CONFIG_MTD_PARTITIONS
-	ret = parse_mtd_partitions(&fun->mtd, part_types, &fun->parts, 0);
-
-#ifdef CONFIG_MTD_OF_PARTS
-	if (ret == 0) {
-		ret = of_mtd_parse_partitions(fun->dev, flash_np, &fun->parts);
-		if (ret < 0)
-			goto err;
-	}
-#endif
-	if (ret > 0)
-		ret = add_mtd_partitions(&fun->mtd, fun->parts, ret);
-	else
-#endif
-		ret = add_mtd_device(&fun->mtd);
+	ppdata.of_node = flash_np;
+	ret = mtd_device_parse_register(&fun->mtd, NULL, &ppdata, NULL, 0);
 err:
 	of_node_put(flash_np);
+	if (ret)
+		kfree(fun->mtd.name);
 	return ret;
 }
 
-static int __devinit fun_probe(struct of_device *ofdev,
-			       const struct of_device_id *ofid)
+static int fun_probe(struct platform_device *ofdev)
 {
 	struct fsl_upm_nand *fun;
 	struct resource io_res;
-	const uint32_t *prop;
+	const __be32 *prop;
 	int rnb_gpio;
 	int ret;
 	int size;
@@ -270,7 +254,7 @@ static int __devinit fun_probe(struct of_device *ofdev,
 			goto err1;
 		}
 		for (i = 0; i < fun->mchip_count; i++)
-			fun->mchip_offsets[i] = prop[i];
+			fun->mchip_offsets[i] = be32_to_cpu(prop[i]);
 	} else {
 		fun->mchip_count = 1;
 	}
@@ -295,13 +279,13 @@ static int __devinit fun_probe(struct of_device *ofdev,
 
 	prop = of_get_property(ofdev->dev.of_node, "chip-delay", NULL);
 	if (prop)
-		fun->chip_delay = *prop;
+		fun->chip_delay = be32_to_cpup(prop);
 	else
 		fun->chip_delay = 50;
 
 	prop = of_get_property(ofdev->dev.of_node, "fsl,upm-wait-flags", &size);
 	if (prop && size == sizeof(uint32_t))
-		fun->wait_flags = *prop;
+		fun->wait_flags = be32_to_cpup(prop);
 	else
 		fun->wait_flags = FSL_UPM_WAIT_RUN_PATTERN |
 				  FSL_UPM_WAIT_WRITE_BYTE;
@@ -335,7 +319,7 @@ err1:
 	return ret;
 }
 
-static int __devexit fun_remove(struct of_device *ofdev)
+static int fun_remove(struct platform_device *ofdev)
 {
 	struct fsl_upm_nand *fun = dev_get_drvdata(&ofdev->dev);
 	int i;
@@ -360,27 +344,17 @@ static const struct of_device_id of_fun_match[] = {
 };
 MODULE_DEVICE_TABLE(of, of_fun_match);
 
-static struct of_platform_driver of_fun_driver = {
+static struct platform_driver of_fun_driver = {
 	.driver = {
 		.name = "fsl,upm-nand",
 		.owner = THIS_MODULE,
 		.of_match_table = of_fun_match,
 	},
 	.probe		= fun_probe,
-	.remove		= __devexit_p(fun_remove),
+	.remove		= fun_remove,
 };
 
-static int __init fun_module_init(void)
-{
-	return of_register_platform_driver(&of_fun_driver);
-}
-module_init(fun_module_init);
-
-static void __exit fun_module_exit(void)
-{
-	of_unregister_platform_driver(&of_fun_driver);
-}
-module_exit(fun_module_exit);
+module_platform_driver(of_fun_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>");
diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
new file mode 100644
index 00000000000..1550692973d
--- /dev/null
+++ b/drivers/mtd/nand/fsmc_nand.c
@@ -0,0 +1,1238 @@
+/*
+ * drivers/mtd/nand/fsmc_nand.c
+ *
+ * ST Microelectronics
+ * Flexible Static Memory Controller (FSMC)
+ * Driver for NAND portions
+ *
+ * Copyright © 2010 ST Microelectronics
+ * Vipin Kumar <vipin.kumar@st.com>
+ * Ashish Priyadarshi
+ *
+ * Based on drivers/mtd/nand/nomadik_nand.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-direction.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/resource.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/mtd/partitions.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/mtd/fsmc.h>
+#include <linux/amba/bus.h>
+#include <mtd/mtd-abi.h>
+
+static struct nand_ecclayout fsmc_ecc1_128_layout = {
+	.eccbytes = 24,
+	.eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52,
+		66, 67, 68, 82, 83, 84, 98, 99, 100, 114, 115, 116},
+	.oobfree = {
+		{.offset = 8, .length = 8},
+		{.offset = 24, .length = 8},
+		{.offset = 40, .length = 8},
+		{.offset = 56, .length = 8},
+		{.offset = 72, .length = 8},
+		{.offset = 88, .length = 8},
+		{.offset = 104, .length = 8},
+		{.offset = 120, .length = 8}
+	}
+};
+
+static struct nand_ecclayout fsmc_ecc1_64_layout = {
+	.eccbytes = 12,
+	.eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52},
+	.oobfree = {
+		{.offset = 8, .length = 8},
+		{.offset = 24, .length = 8},
+		{.offset = 40, .length = 8},
+		{.offset = 56, .length = 8},
+	}
+};
+
+static struct nand_ecclayout fsmc_ecc1_16_layout = {
+	.eccbytes = 3,
+	.eccpos = {2, 3, 4},
+	.oobfree = {
+		{.offset = 8, .length = 8},
+	}
+};
+
+/*
+ * ECC4 layout for NAND of pagesize 8192 bytes & OOBsize 256 bytes. 13*16 bytes
+ * of OB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block and 46
+ * bytes are free for use.
+ */
+static struct nand_ecclayout fsmc_ecc4_256_layout = {
+	.eccbytes = 208,
+	.eccpos = {  2,   3,   4,   5,   6,   7,   8,
+		9,  10,  11,  12,  13,  14,
+		18,  19,  20,  21,  22,  23,  24,
+		25,  26,  27,  28,  29,  30,
+		34,  35,  36,  37,  38,  39,  40,
+		41,  42,  43,  44,  45,  46,
+		50,  51,  52,  53,  54,  55,  56,
+		57,  58,  59,  60,  61,  62,
+		66,  67,  68,  69,  70,  71,  72,
+		73,  74,  75,  76,  77,  78,
+		82,  83,  84,  85,  86,  87,  88,
+		89,  90,  91,  92,  93,  94,
+		98,  99, 100, 101, 102, 103, 104,
+		105, 106, 107, 108, 109, 110,
+		114, 115, 116, 117, 118, 119, 120,
+		121, 122, 123, 124, 125, 126,
+		130, 131, 132, 133, 134, 135, 136,
+		137, 138, 139, 140, 141, 142,
+		146, 147, 148, 149, 150, 151, 152,
+		153, 154, 155, 156, 157, 158,
+		162, 163, 164, 165, 166, 167, 168,
+		169, 170, 171, 172, 173, 174,
+		178, 179, 180, 181, 182, 183, 184,
+		185, 186, 187, 188, 189, 190,
+		194, 195, 196, 197, 198, 199, 200,
+		201, 202, 203, 204, 205, 206,
+		210, 211, 212, 213, 214, 215, 216,
+		217, 218, 219, 220, 221, 222,
+		226, 227, 228, 229, 230, 231, 232,
+		233, 234, 235, 236, 237, 238,
+		242, 243, 244, 245, 246, 247, 248,
+		249, 250, 251, 252, 253, 254
+	},
+	.oobfree = {
+		{.offset = 15, .length = 3},
+		{.offset = 31, .length = 3},
+		{.offset = 47, .length = 3},
+		{.offset = 63, .length = 3},
+		{.offset = 79, .length = 3},
+		{.offset = 95, .length = 3},
+		{.offset = 111, .length = 3},
+		{.offset = 127, .length = 3},
+		{.offset = 143, .length = 3},
+		{.offset = 159, .length = 3},
+		{.offset = 175, .length = 3},
+		{.offset = 191, .length = 3},
+		{.offset = 207, .length = 3},
+		{.offset = 223, .length = 3},
+		{.offset = 239, .length = 3},
+		{.offset = 255, .length = 1}
+	}
+};
+
+/*
+ * ECC4 layout for NAND of pagesize 4096 bytes & OOBsize 224 bytes. 13*8 bytes
+ * of OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block & 118
+ * bytes are free for use.
+ */
+static struct nand_ecclayout fsmc_ecc4_224_layout = {
+	.eccbytes = 104,
+	.eccpos = {  2,   3,   4,   5,   6,   7,   8,
+		9,  10,  11,  12,  13,  14,
+		18,  19,  20,  21,  22,  23,  24,
+		25,  26,  27,  28,  29,  30,
+		34,  35,  36,  37,  38,  39,  40,
+		41,  42,  43,  44,  45,  46,
+		50,  51,  52,  53,  54,  55,  56,
+		57,  58,  59,  60,  61,  62,
+		66,  67,  68,  69,  70,  71,  72,
+		73,  74,  75,  76,  77,  78,
+		82,  83,  84,  85,  86,  87,  88,
+		89,  90,  91,  92,  93,  94,
+		98,  99, 100, 101, 102, 103, 104,
+		105, 106, 107, 108, 109, 110,
+		114, 115, 116, 117, 118, 119, 120,
+		121, 122, 123, 124, 125, 126
+	},
+	.oobfree = {
+		{.offset = 15, .length = 3},
+		{.offset = 31, .length = 3},
+		{.offset = 47, .length = 3},
+		{.offset = 63, .length = 3},
+		{.offset = 79, .length = 3},
+		{.offset = 95, .length = 3},
+		{.offset = 111, .length = 3},
+		{.offset = 127, .length = 97}
+	}
+};
+
+/*
+ * ECC4 layout for NAND of pagesize 4096 bytes & OOBsize 128 bytes. 13*8 bytes
+ * of OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block & 22
+ * bytes are free for use.
+ */
+static struct nand_ecclayout fsmc_ecc4_128_layout = {
+	.eccbytes = 104,
+	.eccpos = {  2,   3,   4,   5,   6,   7,   8,
+		9,  10,  11,  12,  13,  14,
+		18,  19,  20,  21,  22,  23,  24,
+		25,  26,  27,  28,  29,  30,
+		34,  35,  36,  37,  38,  39,  40,
+		41,  42,  43,  44,  45,  46,
+		50,  51,  52,  53,  54,  55,  56,
+		57,  58,  59,  60,  61,  62,
+		66,  67,  68,  69,  70,  71,  72,
+		73,  74,  75,  76,  77,  78,
+		82,  83,  84,  85,  86,  87,  88,
+		89,  90,  91,  92,  93,  94,
+		98,  99, 100, 101, 102, 103, 104,
+		105, 106, 107, 108, 109, 110,
+		114, 115, 116, 117, 118, 119, 120,
+		121, 122, 123, 124, 125, 126
+	},
+	.oobfree = {
+		{.offset = 15, .length = 3},
+		{.offset = 31, .length = 3},
+		{.offset = 47, .length = 3},
+		{.offset = 63, .length = 3},
+		{.offset = 79, .length = 3},
+		{.offset = 95, .length = 3},
+		{.offset = 111, .length = 3},
+		{.offset = 127, .length = 1}
+	}
+};
+
+/*
+ * ECC4 layout for NAND of pagesize 2048 bytes & OOBsize 64 bytes. 13*4 bytes of
+ * OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block and 10
+ * bytes are free for use.
+ */
+static struct nand_ecclayout fsmc_ecc4_64_layout = {
+	.eccbytes = 52,
+	.eccpos = {  2,   3,   4,   5,   6,   7,   8,
+		9,  10,  11,  12,  13,  14,
+		18,  19,  20,  21,  22,  23,  24,
+		25,  26,  27,  28,  29,  30,
+		34,  35,  36,  37,  38,  39,  40,
+		41,  42,  43,  44,  45,  46,
+		50,  51,  52,  53,  54,  55,  56,
+		57,  58,  59,  60,  61,  62,
+	},
+	.oobfree = {
+		{.offset = 15, .length = 3},
+		{.offset = 31, .length = 3},
+		{.offset = 47, .length = 3},
+		{.offset = 63, .length = 1},
+	}
+};
+
+/*
+ * ECC4 layout for NAND of pagesize 512 bytes & OOBsize 16 bytes. 13 bytes of
+ * OOB size is reserved for ECC, Byte no. 4 & 5 reserved for bad block and One
+ * byte is free for use.
+ */
+static struct nand_ecclayout fsmc_ecc4_16_layout = {
+	.eccbytes = 13,
+	.eccpos = { 0,  1,  2,  3,  6,  7, 8,
+		9, 10, 11, 12, 13, 14
+	},
+	.oobfree = {
+		{.offset = 15, .length = 1},
+	}
+};
+
+/*
+ * ECC placement definitions in oobfree type format.
+ * There are 13 bytes of ecc for every 512 byte block and it has to be read
+ * consecutively and immediately after the 512 byte data block for hardware to
+ * generate the error bit offsets in 512 byte data.
+ * Managing the ecc bytes in the following way makes it easier for software to
+ * read ecc bytes consecutive to data bytes. This way is similar to
+ * oobfree structure maintained already in generic nand driver
+ */
+static struct fsmc_eccplace fsmc_ecc4_lp_place = {
+	.eccplace = {
+		{.offset = 2, .length = 13},
+		{.offset = 18, .length = 13},
+		{.offset = 34, .length = 13},
+		{.offset = 50, .length = 13},
+		{.offset = 66, .length = 13},
+		{.offset = 82, .length = 13},
+		{.offset = 98, .length = 13},
+		{.offset = 114, .length = 13}
+	}
+};
+
+static struct fsmc_eccplace fsmc_ecc4_sp_place = {
+	.eccplace = {
+		{.offset = 0, .length = 4},
+		{.offset = 6, .length = 9}
+	}
+};
+
+/**
+ * struct fsmc_nand_data - structure for FSMC NAND device state
+ *
+ * @pid:		Part ID on the AMBA PrimeCell format
+ * @mtd:		MTD info for a NAND flash.
+ * @nand:		Chip related info for a NAND flash.
+ * @partitions:		Partition info for a NAND Flash.
+ * @nr_partitions:	Total number of partition of a NAND flash.
+ *
+ * @ecc_place:		ECC placing locations in oobfree type format.
+ * @bank:		Bank number for probed device.
+ * @clk:		Clock structure for FSMC.
+ *
+ * @read_dma_chan:	DMA channel for read access
+ * @write_dma_chan:	DMA channel for write access to NAND
+ * @dma_access_complete: Completion structure
+ *
+ * @data_pa:		NAND Physical port for Data.
+ * @data_va:		NAND port for Data.
+ * @cmd_va:		NAND port for Command.
+ * @addr_va:		NAND port for Address.
+ * @regs_va:		FSMC regs base address.
+ */
+struct fsmc_nand_data {
+	u32			pid;
+	struct mtd_info		mtd;
+	struct nand_chip	nand;
+	struct mtd_partition	*partitions;
+	unsigned int		nr_partitions;
+
+	struct fsmc_eccplace	*ecc_place;
+	unsigned int		bank;
+	struct device		*dev;
+	enum access_mode	mode;
+	struct clk		*clk;
+
+	/* DMA related objects */
+	struct dma_chan		*read_dma_chan;
+	struct dma_chan		*write_dma_chan;
+	struct completion	dma_access_complete;
+
+	struct fsmc_nand_timings *dev_timings;
+
+	dma_addr_t		data_pa;
+	void __iomem		*data_va;
+	void __iomem		*cmd_va;
+	void __iomem		*addr_va;
+	void __iomem		*regs_va;
+
+	void			(*select_chip)(uint32_t bank, uint32_t busw);
+};
+
+/* Assert CS signal based on chipnr */
+static void fsmc_select_chip(struct mtd_info *mtd, int chipnr)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct fsmc_nand_data *host;
+
+	host = container_of(mtd, struct fsmc_nand_data, mtd);
+
+	switch (chipnr) {
+	case -1:
+		chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE);
+		break;
+	case 0:
+	case 1:
+	case 2:
+	case 3:
+		if (host->select_chip)
+			host->select_chip(chipnr,
+					chip->options & NAND_BUSWIDTH_16);
+		break;
+
+	default:
+		BUG();
+	}
+}
+
+/*
+ * fsmc_cmd_ctrl - For facilitaing Hardware access
+ * This routine allows hardware specific access to control-lines(ALE,CLE)
+ */
+static void fsmc_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+	struct fsmc_nand_data *host = container_of(mtd,
+					struct fsmc_nand_data, mtd);
+	void __iomem *regs = host->regs_va;
+	unsigned int bank = host->bank;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		u32 pc;
+
+		if (ctrl & NAND_CLE) {
+			this->IO_ADDR_R = host->cmd_va;
+			this->IO_ADDR_W = host->cmd_va;
+		} else if (ctrl & NAND_ALE) {
+			this->IO_ADDR_R = host->addr_va;
+			this->IO_ADDR_W = host->addr_va;
+		} else {
+			this->IO_ADDR_R = host->data_va;
+			this->IO_ADDR_W = host->data_va;
+		}
+
+		pc = readl(FSMC_NAND_REG(regs, bank, PC));
+		if (ctrl & NAND_NCE)
+			pc |= FSMC_ENABLE;
+		else
+			pc &= ~FSMC_ENABLE;
+		writel_relaxed(pc, FSMC_NAND_REG(regs, bank, PC));
+	}
+
+	mb();
+
+	if (cmd != NAND_CMD_NONE)
+		writeb_relaxed(cmd, this->IO_ADDR_W);
+}
+
+/*
+ * fsmc_nand_setup - FSMC (Flexible Static Memory Controller) init routine
+ *
+ * This routine initializes timing parameters related to NAND memory access in
+ * FSMC registers
+ */
+static void fsmc_nand_setup(void __iomem *regs, uint32_t bank,
+			   uint32_t busw, struct fsmc_nand_timings *timings)
+{
+	uint32_t value = FSMC_DEVTYPE_NAND | FSMC_ENABLE | FSMC_WAITON;
+	uint32_t tclr, tar, thiz, thold, twait, tset;
+	struct fsmc_nand_timings *tims;
+	struct fsmc_nand_timings default_timings = {
+		.tclr	= FSMC_TCLR_1,
+		.tar	= FSMC_TAR_1,
+		.thiz	= FSMC_THIZ_1,
+		.thold	= FSMC_THOLD_4,
+		.twait	= FSMC_TWAIT_6,
+		.tset	= FSMC_TSET_0,
+	};
+
+	if (timings)
+		tims = timings;
+	else
+		tims = &default_timings;
+
+	tclr = (tims->tclr & FSMC_TCLR_MASK) << FSMC_TCLR_SHIFT;
+	tar = (tims->tar & FSMC_TAR_MASK) << FSMC_TAR_SHIFT;
+	thiz = (tims->thiz & FSMC_THIZ_MASK) << FSMC_THIZ_SHIFT;
+	thold = (tims->thold & FSMC_THOLD_MASK) << FSMC_THOLD_SHIFT;
+	twait = (tims->twait & FSMC_TWAIT_MASK) << FSMC_TWAIT_SHIFT;
+	tset = (tims->tset & FSMC_TSET_MASK) << FSMC_TSET_SHIFT;
+
+	if (busw)
+		writel_relaxed(value | FSMC_DEVWID_16,
+				FSMC_NAND_REG(regs, bank, PC));
+	else
+		writel_relaxed(value | FSMC_DEVWID_8,
+				FSMC_NAND_REG(regs, bank, PC));
+
+	writel_relaxed(readl(FSMC_NAND_REG(regs, bank, PC)) | tclr | tar,
+			FSMC_NAND_REG(regs, bank, PC));
+	writel_relaxed(thiz | thold | twait | tset,
+			FSMC_NAND_REG(regs, bank, COMM));
+	writel_relaxed(thiz | thold | twait | tset,
+			FSMC_NAND_REG(regs, bank, ATTRIB));
+}
+
+/*
+ * fsmc_enable_hwecc - Enables Hardware ECC through FSMC registers
+ */
+static void fsmc_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+	struct fsmc_nand_data *host = container_of(mtd,
+					struct fsmc_nand_data, mtd);
+	void __iomem *regs = host->regs_va;
+	uint32_t bank = host->bank;
+
+	writel_relaxed(readl(FSMC_NAND_REG(regs, bank, PC)) & ~FSMC_ECCPLEN_256,
+			FSMC_NAND_REG(regs, bank, PC));
+	writel_relaxed(readl(FSMC_NAND_REG(regs, bank, PC)) & ~FSMC_ECCEN,
+			FSMC_NAND_REG(regs, bank, PC));
+	writel_relaxed(readl(FSMC_NAND_REG(regs, bank, PC)) | FSMC_ECCEN,
+			FSMC_NAND_REG(regs, bank, PC));
+}
+
+/*
+ * fsmc_read_hwecc_ecc4 - Hardware ECC calculator for ecc4 option supported by
+ * FSMC. ECC is 13 bytes for 512 bytes of data (supports error correction up to
+ * max of 8-bits)
+ */
+static int fsmc_read_hwecc_ecc4(struct mtd_info *mtd, const uint8_t *data,
+				uint8_t *ecc)
+{
+	struct fsmc_nand_data *host = container_of(mtd,
+					struct fsmc_nand_data, mtd);
+	void __iomem *regs = host->regs_va;
+	uint32_t bank = host->bank;
+	uint32_t ecc_tmp;
+	unsigned long deadline = jiffies + FSMC_BUSY_WAIT_TIMEOUT;
+
+	do {
+		if (readl_relaxed(FSMC_NAND_REG(regs, bank, STS)) & FSMC_CODE_RDY)
+			break;
+		else
+			cond_resched();
+	} while (!time_after_eq(jiffies, deadline));
+
+	if (time_after_eq(jiffies, deadline)) {
+		dev_err(host->dev, "calculate ecc timed out\n");
+		return -ETIMEDOUT;
+	}
+
+	ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC1));
+	ecc[0] = (uint8_t) (ecc_tmp >> 0);
+	ecc[1] = (uint8_t) (ecc_tmp >> 8);
+	ecc[2] = (uint8_t) (ecc_tmp >> 16);
+	ecc[3] = (uint8_t) (ecc_tmp >> 24);
+
+	ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC2));
+	ecc[4] = (uint8_t) (ecc_tmp >> 0);
+	ecc[5] = (uint8_t) (ecc_tmp >> 8);
+	ecc[6] = (uint8_t) (ecc_tmp >> 16);
+	ecc[7] = (uint8_t) (ecc_tmp >> 24);
+
+	ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC3));
+	ecc[8] = (uint8_t) (ecc_tmp >> 0);
+	ecc[9] = (uint8_t) (ecc_tmp >> 8);
+	ecc[10] = (uint8_t) (ecc_tmp >> 16);
+	ecc[11] = (uint8_t) (ecc_tmp >> 24);
+
+	ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, STS));
+	ecc[12] = (uint8_t) (ecc_tmp >> 16);
+
+	return 0;
+}
+
+/*
+ * fsmc_read_hwecc_ecc1 - Hardware ECC calculator for ecc1 option supported by
+ * FSMC. ECC is 3 bytes for 512 bytes of data (supports error correction up to
+ * max of 1-bit)
+ */
+static int fsmc_read_hwecc_ecc1(struct mtd_info *mtd, const uint8_t *data,
+				uint8_t *ecc)
+{
+	struct fsmc_nand_data *host = container_of(mtd,
+					struct fsmc_nand_data, mtd);
+	void __iomem *regs = host->regs_va;
+	uint32_t bank = host->bank;
+	uint32_t ecc_tmp;
+
+	ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC1));
+	ecc[0] = (uint8_t) (ecc_tmp >> 0);
+	ecc[1] = (uint8_t) (ecc_tmp >> 8);
+	ecc[2] = (uint8_t) (ecc_tmp >> 16);
+
+	return 0;
+}
+
+/* Count the number of 0's in buff upto a max of max_bits */
+static int count_written_bits(uint8_t *buff, int size, int max_bits)
+{
+	int k, written_bits = 0;
+
+	for (k = 0; k < size; k++) {
+		written_bits += hweight8(~buff[k]);
+		if (written_bits > max_bits)
+			break;
+	}
+
+	return written_bits;
+}
+
+static void dma_complete(void *param)
+{
+	struct fsmc_nand_data *host = param;
+
+	complete(&host->dma_access_complete);
+}
+
+static int dma_xfer(struct fsmc_nand_data *host, void *buffer, int len,
+		enum dma_data_direction direction)
+{
+	struct dma_chan *chan;
+	struct dma_device *dma_dev;
+	struct dma_async_tx_descriptor *tx;
+	dma_addr_t dma_dst, dma_src, dma_addr;
+	dma_cookie_t cookie;
+	unsigned long flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
+	int ret;
+
+	if (direction == DMA_TO_DEVICE)
+		chan = host->write_dma_chan;
+	else if (direction == DMA_FROM_DEVICE)
+		chan = host->read_dma_chan;
+	else
+		return -EINVAL;
+
+	dma_dev = chan->device;
+	dma_addr = dma_map_single(dma_dev->dev, buffer, len, direction);
+
+	if (direction == DMA_TO_DEVICE) {
+		dma_src = dma_addr;
+		dma_dst = host->data_pa;
+	} else {
+		dma_src = host->data_pa;
+		dma_dst = dma_addr;
+	}
+
+	tx = dma_dev->device_prep_dma_memcpy(chan, dma_dst, dma_src,
+			len, flags);
+	if (!tx) {
+		dev_err(host->dev, "device_prep_dma_memcpy error\n");
+		ret = -EIO;
+		goto unmap_dma;
+	}
+
+	tx->callback = dma_complete;
+	tx->callback_param = host;
+	cookie = tx->tx_submit(tx);
+
+	ret = dma_submit_error(cookie);
+	if (ret) {
+		dev_err(host->dev, "dma_submit_error %d\n", cookie);
+		goto unmap_dma;
+	}
+
+	dma_async_issue_pending(chan);
+
+	ret =
+	wait_for_completion_timeout(&host->dma_access_complete,
+				msecs_to_jiffies(3000));
+	if (ret <= 0) {
+		chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
+		dev_err(host->dev, "wait_for_completion_timeout\n");
+		if (!ret)
+			ret = -ETIMEDOUT;
+		goto unmap_dma;
+	}
+
+	ret = 0;
+
+unmap_dma:
+	dma_unmap_single(dma_dev->dev, dma_addr, len, direction);
+
+	return ret;
+}
+
+/*
+ * fsmc_write_buf - write buffer to chip
+ * @mtd:	MTD device structure
+ * @buf:	data buffer
+ * @len:	number of bytes to write
+ */
+static void fsmc_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+	int i;
+	struct nand_chip *chip = mtd->priv;
+
+	if (IS_ALIGNED((uint32_t)buf, sizeof(uint32_t)) &&
+			IS_ALIGNED(len, sizeof(uint32_t))) {
+		uint32_t *p = (uint32_t *)buf;
+		len = len >> 2;
+		for (i = 0; i < len; i++)
+			writel_relaxed(p[i], chip->IO_ADDR_W);
+	} else {
+		for (i = 0; i < len; i++)
+			writeb_relaxed(buf[i], chip->IO_ADDR_W);
+	}
+}
+
+/*
+ * fsmc_read_buf - read chip data into buffer
+ * @mtd:	MTD device structure
+ * @buf:	buffer to store date
+ * @len:	number of bytes to read
+ */
+static void fsmc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+	int i;
+	struct nand_chip *chip = mtd->priv;
+
+	if (IS_ALIGNED((uint32_t)buf, sizeof(uint32_t)) &&
+			IS_ALIGNED(len, sizeof(uint32_t))) {
+		uint32_t *p = (uint32_t *)buf;
+		len = len >> 2;
+		for (i = 0; i < len; i++)
+			p[i] = readl_relaxed(chip->IO_ADDR_R);
+	} else {
+		for (i = 0; i < len; i++)
+			buf[i] = readb_relaxed(chip->IO_ADDR_R);
+	}
+}
+
+/*
+ * fsmc_read_buf_dma - read chip data into buffer
+ * @mtd:	MTD device structure
+ * @buf:	buffer to store date
+ * @len:	number of bytes to read
+ */
+static void fsmc_read_buf_dma(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+	struct fsmc_nand_data *host;
+
+	host = container_of(mtd, struct fsmc_nand_data, mtd);
+	dma_xfer(host, buf, len, DMA_FROM_DEVICE);
+}
+
+/*
+ * fsmc_write_buf_dma - write buffer to chip
+ * @mtd:	MTD device structure
+ * @buf:	data buffer
+ * @len:	number of bytes to write
+ */
+static void fsmc_write_buf_dma(struct mtd_info *mtd, const uint8_t *buf,
+		int len)
+{
+	struct fsmc_nand_data *host;
+
+	host = container_of(mtd, struct fsmc_nand_data, mtd);
+	dma_xfer(host, (void *)buf, len, DMA_TO_DEVICE);
+}
+
+/*
+ * fsmc_read_page_hwecc
+ * @mtd:	mtd info structure
+ * @chip:	nand chip info structure
+ * @buf:	buffer to store read data
+ * @oob_required:	caller expects OOB data read to chip->oob_poi
+ * @page:	page number to read
+ *
+ * This routine is needed for fsmc version 8 as reading from NAND chip has to be
+ * performed in a strict sequence as follows:
+ * data(512 byte) -> ecc(13 byte)
+ * After this read, fsmc hardware generates and reports error data bits(up to a
+ * max of 8 bits)
+ */
+static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
+				 uint8_t *buf, int oob_required, int page)
+{
+	struct fsmc_nand_data *host = container_of(mtd,
+					struct fsmc_nand_data, mtd);
+	struct fsmc_eccplace *ecc_place = host->ecc_place;
+	int i, j, s, stat, eccsize = chip->ecc.size;
+	int eccbytes = chip->ecc.bytes;
+	int eccsteps = chip->ecc.steps;
+	uint8_t *p = buf;
+	uint8_t *ecc_calc = chip->buffers->ecccalc;
+	uint8_t *ecc_code = chip->buffers->ecccode;
+	int off, len, group = 0;
+	/*
+	 * ecc_oob is intentionally taken as uint16_t. In 16bit devices, we
+	 * end up reading 14 bytes (7 words) from oob. The local array is
+	 * to maintain word alignment
+	 */
+	uint16_t ecc_oob[7];
+	uint8_t *oob = (uint8_t *)&ecc_oob[0];
+	unsigned int max_bitflips = 0;
+
+	for (i = 0, s = 0; s < eccsteps; s++, i += eccbytes, p += eccsize) {
+		chip->cmdfunc(mtd, NAND_CMD_READ0, s * eccsize, page);
+		chip->ecc.hwctl(mtd, NAND_ECC_READ);
+		chip->read_buf(mtd, p, eccsize);
+
+		for (j = 0; j < eccbytes;) {
+			off = ecc_place->eccplace[group].offset;
+			len = ecc_place->eccplace[group].length;
+			group++;
+
+			/*
+			 * length is intentionally kept a higher multiple of 2
+			 * to read at least 13 bytes even in case of 16 bit NAND
+			 * devices
+			 */
+			if (chip->options & NAND_BUSWIDTH_16)
+				len = roundup(len, 2);
+
+			chip->cmdfunc(mtd, NAND_CMD_READOOB, off, page);
+			chip->read_buf(mtd, oob + j, len);
+			j += len;
+		}
+
+		memcpy(&ecc_code[i], oob, chip->ecc.bytes);
+		chip->ecc.calculate(mtd, p, &ecc_calc[i]);
+
+		stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
+		if (stat < 0) {
+			mtd->ecc_stats.failed++;
+		} else {
+			mtd->ecc_stats.corrected += stat;
+			max_bitflips = max_t(unsigned int, max_bitflips, stat);
+		}
+	}
+
+	return max_bitflips;
+}
+
+/*
+ * fsmc_bch8_correct_data
+ * @mtd:	mtd info structure
+ * @dat:	buffer of read data
+ * @read_ecc:	ecc read from device spare area
+ * @calc_ecc:	ecc calculated from read data
+ *
+ * calc_ecc is a 104 bit information containing maximum of 8 error
+ * offset informations of 13 bits each in 512 bytes of read data.
+ */
+static int fsmc_bch8_correct_data(struct mtd_info *mtd, uint8_t *dat,
+			     uint8_t *read_ecc, uint8_t *calc_ecc)
+{
+	struct fsmc_nand_data *host = container_of(mtd,
+					struct fsmc_nand_data, mtd);
+	struct nand_chip *chip = mtd->priv;
+	void __iomem *regs = host->regs_va;
+	unsigned int bank = host->bank;
+	uint32_t err_idx[8];
+	uint32_t num_err, i;
+	uint32_t ecc1, ecc2, ecc3, ecc4;
+
+	num_err = (readl_relaxed(FSMC_NAND_REG(regs, bank, STS)) >> 10) & 0xF;
+
+	/* no bit flipping */
+	if (likely(num_err == 0))
+		return 0;
+
+	/* too many errors */
+	if (unlikely(num_err > 8)) {
+		/*
+		 * This is a temporary erase check. A newly erased page read
+		 * would result in an ecc error because the oob data is also
+		 * erased to FF and the calculated ecc for an FF data is not
+		 * FF..FF.
+		 * This is a workaround to skip performing correction in case
+		 * data is FF..FF
+		 *
+		 * Logic:
+		 * For every page, each bit written as 0 is counted until these
+		 * number of bits are greater than 8 (the maximum correction
+		 * capability of FSMC for each 512 + 13 bytes)
+		 */
+
+		int bits_ecc = count_written_bits(read_ecc, chip->ecc.bytes, 8);
+		int bits_data = count_written_bits(dat, chip->ecc.size, 8);
+
+		if ((bits_ecc + bits_data) <= 8) {
+			if (bits_data)
+				memset(dat, 0xff, chip->ecc.size);
+			return bits_data;
+		}
+
+		return -EBADMSG;
+	}
+
+	/*
+	 * ------------------- calc_ecc[] bit wise -----------|--13 bits--|
+	 * |---idx[7]--|--.....-----|---idx[2]--||---idx[1]--||---idx[0]--|
+	 *
+	 * calc_ecc is a 104 bit information containing maximum of 8 error
+	 * offset informations of 13 bits each. calc_ecc is copied into a
+	 * uint64_t array and error offset indexes are populated in err_idx
+	 * array
+	 */
+	ecc1 = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC1));
+	ecc2 = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC2));
+	ecc3 = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC3));
+	ecc4 = readl_relaxed(FSMC_NAND_REG(regs, bank, STS));
+
+	err_idx[0] = (ecc1 >> 0) & 0x1FFF;
+	err_idx[1] = (ecc1 >> 13) & 0x1FFF;
+	err_idx[2] = (((ecc2 >> 0) & 0x7F) << 6) | ((ecc1 >> 26) & 0x3F);
+	err_idx[3] = (ecc2 >> 7) & 0x1FFF;
+	err_idx[4] = (((ecc3 >> 0) & 0x1) << 12) | ((ecc2 >> 20) & 0xFFF);
+	err_idx[5] = (ecc3 >> 1) & 0x1FFF;
+	err_idx[6] = (ecc3 >> 14) & 0x1FFF;
+	err_idx[7] = (((ecc4 >> 16) & 0xFF) << 5) | ((ecc3 >> 27) & 0x1F);
+
+	i = 0;
+	while (num_err--) {
+		change_bit(0, (unsigned long *)&err_idx[i]);
+		change_bit(1, (unsigned long *)&err_idx[i]);
+
+		if (err_idx[i] < chip->ecc.size * 8) {
+			change_bit(err_idx[i], (unsigned long *)dat);
+			i++;
+		}
+	}
+	return i;
+}
+
+static bool filter(struct dma_chan *chan, void *slave)
+{
+	chan->private = slave;
+	return true;
+}
+
+#ifdef CONFIG_OF
+static int fsmc_nand_probe_config_dt(struct platform_device *pdev,
+				     struct device_node *np)
+{
+	struct fsmc_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	u32 val;
+
+	/* Set default NAND width to 8 bits */
+	pdata->width = 8;
+	if (!of_property_read_u32(np, "bank-width", &val)) {
+		if (val == 2) {
+			pdata->width = 16;
+		} else if (val != 1) {
+			dev_err(&pdev->dev, "invalid bank-width %u\n", val);
+			return -EINVAL;
+		}
+	}
+	if (of_get_property(np, "nand-skip-bbtscan", NULL))
+		pdata->options = NAND_SKIP_BBTSCAN;
+
+	pdata->nand_timings = devm_kzalloc(&pdev->dev,
+				sizeof(*pdata->nand_timings), GFP_KERNEL);
+	if (!pdata->nand_timings)
+		return -ENOMEM;
+	of_property_read_u8_array(np, "timings", (u8 *)pdata->nand_timings,
+						sizeof(*pdata->nand_timings));
+
+	/* Set default NAND bank to 0 */
+	pdata->bank = 0;
+	if (!of_property_read_u32(np, "bank", &val)) {
+		if (val > 3) {
+			dev_err(&pdev->dev, "invalid bank %u\n", val);
+			return -EINVAL;
+		}
+		pdata->bank = val;
+	}
+	return 0;
+}
+#else
+static int fsmc_nand_probe_config_dt(struct platform_device *pdev,
+				     struct device_node *np)
+{
+	return -ENOSYS;
+}
+#endif
+
+/*
+ * fsmc_nand_probe - Probe function
+ * @pdev:       platform device structure
+ */
+static int __init fsmc_nand_probe(struct platform_device *pdev)
+{
+	struct fsmc_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct device_node __maybe_unused *np = pdev->dev.of_node;
+	struct mtd_part_parser_data ppdata = {};
+	struct fsmc_nand_data *host;
+	struct mtd_info *mtd;
+	struct nand_chip *nand;
+	struct resource *res;
+	dma_cap_mask_t mask;
+	int ret = 0;
+	u32 pid;
+	int i;
+
+	if (np) {
+		pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+		pdev->dev.platform_data = pdata;
+		ret = fsmc_nand_probe_config_dt(pdev, np);
+		if (ret) {
+			dev_err(&pdev->dev, "no platform data\n");
+			return -ENODEV;
+		}
+	}
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "platform data is NULL\n");
+		return -EINVAL;
+	}
+
+	/* Allocate memory for the device structure (and zero it) */
+	host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
+	if (!host)
+		return -ENOMEM;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data");
+	host->data_va = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(host->data_va))
+		return PTR_ERR(host->data_va);
+	
+	host->data_pa = (dma_addr_t)res->start;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_addr");
+	host->addr_va = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(host->addr_va))
+		return PTR_ERR(host->addr_va);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_cmd");
+	host->cmd_va = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(host->cmd_va))
+		return PTR_ERR(host->cmd_va);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fsmc_regs");
+	host->regs_va = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(host->regs_va))
+		return PTR_ERR(host->regs_va);
+
+	host->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(host->clk)) {
+		dev_err(&pdev->dev, "failed to fetch block clock\n");
+		return PTR_ERR(host->clk);
+	}
+
+	ret = clk_prepare_enable(host->clk);
+	if (ret)
+		goto err_clk_prepare_enable;
+
+	/*
+	 * This device ID is actually a common AMBA ID as used on the
+	 * AMBA PrimeCell bus. However it is not a PrimeCell.
+	 */
+	for (pid = 0, i = 0; i < 4; i++)
+		pid |= (readl(host->regs_va + resource_size(res) - 0x20 + 4 * i) & 255) << (i * 8);
+	host->pid = pid;
+	dev_info(&pdev->dev, "FSMC device partno %03x, manufacturer %02x, "
+		 "revision %02x, config %02x\n",
+		 AMBA_PART_BITS(pid), AMBA_MANF_BITS(pid),
+		 AMBA_REV_BITS(pid), AMBA_CONFIG_BITS(pid));
+
+	host->bank = pdata->bank;
+	host->select_chip = pdata->select_bank;
+	host->partitions = pdata->partitions;
+	host->nr_partitions = pdata->nr_partitions;
+	host->dev = &pdev->dev;
+	host->dev_timings = pdata->nand_timings;
+	host->mode = pdata->mode;
+
+	if (host->mode == USE_DMA_ACCESS)
+		init_completion(&host->dma_access_complete);
+
+	/* Link all private pointers */
+	mtd = &host->mtd;
+	nand = &host->nand;
+	mtd->priv = nand;
+	nand->priv = host;
+
+	host->mtd.owner = THIS_MODULE;
+	nand->IO_ADDR_R = host->data_va;
+	nand->IO_ADDR_W = host->data_va;
+	nand->cmd_ctrl = fsmc_cmd_ctrl;
+	nand->chip_delay = 30;
+
+	nand->ecc.mode = NAND_ECC_HW;
+	nand->ecc.hwctl = fsmc_enable_hwecc;
+	nand->ecc.size = 512;
+	nand->options = pdata->options;
+	nand->select_chip = fsmc_select_chip;
+	nand->badblockbits = 7;
+
+	if (pdata->width == FSMC_NAND_BW16)
+		nand->options |= NAND_BUSWIDTH_16;
+
+	switch (host->mode) {
+	case USE_DMA_ACCESS:
+		dma_cap_zero(mask);
+		dma_cap_set(DMA_MEMCPY, mask);
+		host->read_dma_chan = dma_request_channel(mask, filter,
+				pdata->read_dma_priv);
+		if (!host->read_dma_chan) {
+			dev_err(&pdev->dev, "Unable to get read dma channel\n");
+			goto err_req_read_chnl;
+		}
+		host->write_dma_chan = dma_request_channel(mask, filter,
+				pdata->write_dma_priv);
+		if (!host->write_dma_chan) {
+			dev_err(&pdev->dev, "Unable to get write dma channel\n");
+			goto err_req_write_chnl;
+		}
+		nand->read_buf = fsmc_read_buf_dma;
+		nand->write_buf = fsmc_write_buf_dma;
+		break;
+
+	default:
+	case USE_WORD_ACCESS:
+		nand->read_buf = fsmc_read_buf;
+		nand->write_buf = fsmc_write_buf;
+		break;
+	}
+
+	fsmc_nand_setup(host->regs_va, host->bank,
+			nand->options & NAND_BUSWIDTH_16,
+			host->dev_timings);
+
+	if (AMBA_REV_BITS(host->pid) >= 8) {
+		nand->ecc.read_page = fsmc_read_page_hwecc;
+		nand->ecc.calculate = fsmc_read_hwecc_ecc4;
+		nand->ecc.correct = fsmc_bch8_correct_data;
+		nand->ecc.bytes = 13;
+		nand->ecc.strength = 8;
+	} else {
+		nand->ecc.calculate = fsmc_read_hwecc_ecc1;
+		nand->ecc.correct = nand_correct_data;
+		nand->ecc.bytes = 3;
+		nand->ecc.strength = 1;
+	}
+
+	/*
+	 * Scan to find existence of the device
+	 */
+	if (nand_scan_ident(&host->mtd, 1, NULL)) {
+		ret = -ENXIO;
+		dev_err(&pdev->dev, "No NAND Device found!\n");
+		goto err_scan_ident;
+	}
+
+	if (AMBA_REV_BITS(host->pid) >= 8) {
+		switch (host->mtd.oobsize) {
+		case 16:
+			nand->ecc.layout = &fsmc_ecc4_16_layout;
+			host->ecc_place = &fsmc_ecc4_sp_place;
+			break;
+		case 64:
+			nand->ecc.layout = &fsmc_ecc4_64_layout;
+			host->ecc_place = &fsmc_ecc4_lp_place;
+			break;
+		case 128:
+			nand->ecc.layout = &fsmc_ecc4_128_layout;
+			host->ecc_place = &fsmc_ecc4_lp_place;
+			break;
+		case 224:
+			nand->ecc.layout = &fsmc_ecc4_224_layout;
+			host->ecc_place = &fsmc_ecc4_lp_place;
+			break;
+		case 256:
+			nand->ecc.layout = &fsmc_ecc4_256_layout;
+			host->ecc_place = &fsmc_ecc4_lp_place;
+			break;
+		default:
+			dev_warn(&pdev->dev, "No oob scheme defined for oobsize %d\n",
+				 mtd->oobsize);
+			BUG();
+		}
+	} else {
+		switch (host->mtd.oobsize) {
+		case 16:
+			nand->ecc.layout = &fsmc_ecc1_16_layout;
+			break;
+		case 64:
+			nand->ecc.layout = &fsmc_ecc1_64_layout;
+			break;
+		case 128:
+			nand->ecc.layout = &fsmc_ecc1_128_layout;
+			break;
+		default:
+			dev_warn(&pdev->dev, "No oob scheme defined for oobsize %d\n",
+				 mtd->oobsize);
+			BUG();
+		}
+	}
+
+	/* Second stage of scan to fill MTD data-structures */
+	if (nand_scan_tail(&host->mtd)) {
+		ret = -ENXIO;
+		goto err_probe;
+	}
+
+	/*
+	 * The partition information can is accessed by (in the same precedence)
+	 *
+	 * command line through Bootloader,
+	 * platform data,
+	 * default partition information present in driver.
+	 */
+	/*
+	 * Check for partition info passed
+	 */
+	host->mtd.name = "nand";
+	ppdata.of_node = np;
+	ret = mtd_device_parse_register(&host->mtd, NULL, &ppdata,
+					host->partitions, host->nr_partitions);
+	if (ret)
+		goto err_probe;
+
+	platform_set_drvdata(pdev, host);
+	dev_info(&pdev->dev, "FSMC NAND driver registration successful\n");
+	return 0;
+
+err_probe:
+err_scan_ident:
+	if (host->mode == USE_DMA_ACCESS)
+		dma_release_channel(host->write_dma_chan);
+err_req_write_chnl:
+	if (host->mode == USE_DMA_ACCESS)
+		dma_release_channel(host->read_dma_chan);
+err_req_read_chnl:
+	clk_disable_unprepare(host->clk);
+err_clk_prepare_enable:
+	clk_put(host->clk);
+	return ret;
+}
+
+/*
+ * Clean up routine
+ */
+static int fsmc_nand_remove(struct platform_device *pdev)
+{
+	struct fsmc_nand_data *host = platform_get_drvdata(pdev);
+
+	if (host) {
+		nand_release(&host->mtd);
+
+		if (host->mode == USE_DMA_ACCESS) {
+			dma_release_channel(host->write_dma_chan);
+			dma_release_channel(host->read_dma_chan);
+		}
+		clk_disable_unprepare(host->clk);
+		clk_put(host->clk);
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int fsmc_nand_suspend(struct device *dev)
+{
+	struct fsmc_nand_data *host = dev_get_drvdata(dev);
+	if (host)
+		clk_disable_unprepare(host->clk);
+	return 0;
+}
+
+static int fsmc_nand_resume(struct device *dev)
+{
+	struct fsmc_nand_data *host = dev_get_drvdata(dev);
+	if (host) {
+		clk_prepare_enable(host->clk);
+		fsmc_nand_setup(host->regs_va, host->bank,
+				host->nand.options & NAND_BUSWIDTH_16,
+				host->dev_timings);
+	}
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(fsmc_nand_pm_ops, fsmc_nand_suspend, fsmc_nand_resume);
+
+#ifdef CONFIG_OF
+static const struct of_device_id fsmc_nand_id_table[] = {
+	{ .compatible = "st,spear600-fsmc-nand" },
+	{ .compatible = "stericsson,fsmc-nand" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, fsmc_nand_id_table);
+#endif
+
+static struct platform_driver fsmc_nand_driver = {
+	.remove = fsmc_nand_remove,
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "fsmc-nand",
+		.of_match_table = of_match_ptr(fsmc_nand_id_table),
+		.pm = &fsmc_nand_pm_ops,
+	},
+};
+
+module_platform_driver_probe(fsmc_nand_driver, fsmc_nand_probe);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Vipin Kumar <vipin.kumar@st.com>, Ashish Priyadarshi");
+MODULE_DESCRIPTION("NAND driver for SPEAr Platforms");
diff --git a/drivers/mtd/nand/gpio.c b/drivers/mtd/nand/gpio.c
index 0cde618bcc1..117ce333fdd 100644
--- a/drivers/mtd/nand/gpio.c
+++ b/drivers/mtd/nand/gpio.c
@@ -17,7 +17,7 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/init.h>
+#include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
@@ -27,6 +27,9 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand-gpio.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_gpio.h>
 
 struct gpiomtd {
 	void __iomem		*io_sync;
@@ -83,231 +86,201 @@ static void gpio_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 	gpio_nand_dosync(gpiomtd);
 }
 
-static void gpio_nand_writebuf(struct mtd_info *mtd, const u_char *buf, int len)
+static int gpio_nand_devready(struct mtd_info *mtd)
 {
-	struct nand_chip *this = mtd->priv;
+	struct gpiomtd *gpiomtd = gpio_nand_getpriv(mtd);
 
-	writesb(this->IO_ADDR_W, buf, len);
+	return gpio_get_value(gpiomtd->plat.gpio_rdy);
 }
 
-static void gpio_nand_readbuf(struct mtd_info *mtd, u_char *buf, int len)
+#ifdef CONFIG_OF
+static const struct of_device_id gpio_nand_id_table[] = {
+	{ .compatible = "gpio-control-nand" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, gpio_nand_id_table);
+
+static int gpio_nand_get_config_of(const struct device *dev,
+				   struct gpio_nand_platdata *plat)
 {
-	struct nand_chip *this = mtd->priv;
+	u32 val;
 
-	readsb(this->IO_ADDR_R, buf, len);
-}
+	if (!dev->of_node)
+		return -ENODEV;
 
-static int gpio_nand_verifybuf(struct mtd_info *mtd, const u_char *buf, int len)
-{
-	struct nand_chip *this = mtd->priv;
-	unsigned char read, *p = (unsigned char *) buf;
-	int i, err = 0;
-
-	for (i = 0; i < len; i++) {
-		read = readb(this->IO_ADDR_R);
-		if (read != p[i]) {
-			pr_debug("%s: err at %d (read %04x vs %04x)\n",
-			       __func__, i, read, p[i]);
-			err = -EFAULT;
+	if (!of_property_read_u32(dev->of_node, "bank-width", &val)) {
+		if (val == 2) {
+			plat->options |= NAND_BUSWIDTH_16;
+		} else if (val != 1) {
+			dev_err(dev, "invalid bank-width %u\n", val);
+			return -EINVAL;
 		}
 	}
-	return err;
-}
 
-static void gpio_nand_writebuf16(struct mtd_info *mtd, const u_char *buf,
-				 int len)
-{
-	struct nand_chip *this = mtd->priv;
+	plat->gpio_rdy = of_get_gpio(dev->of_node, 0);
+	plat->gpio_nce = of_get_gpio(dev->of_node, 1);
+	plat->gpio_ale = of_get_gpio(dev->of_node, 2);
+	plat->gpio_cle = of_get_gpio(dev->of_node, 3);
+	plat->gpio_nwp = of_get_gpio(dev->of_node, 4);
 
-	if (IS_ALIGNED((unsigned long)buf, 2)) {
-		writesw(this->IO_ADDR_W, buf, len>>1);
-	} else {
-		int i;
-		unsigned short *ptr = (unsigned short *)buf;
+	if (!of_property_read_u32(dev->of_node, "chip-delay", &val))
+		plat->chip_delay = val;
 
-		for (i = 0; i < len; i += 2, ptr++)
-			writew(*ptr, this->IO_ADDR_W);
-	}
+	return 0;
 }
 
-static void gpio_nand_readbuf16(struct mtd_info *mtd, u_char *buf, int len)
+static struct resource *gpio_nand_get_io_sync_of(struct platform_device *pdev)
 {
-	struct nand_chip *this = mtd->priv;
+	struct resource *r;
+	u64 addr;
 
-	if (IS_ALIGNED((unsigned long)buf, 2)) {
-		readsw(this->IO_ADDR_R, buf, len>>1);
-	} else {
-		int i;
-		unsigned short *ptr = (unsigned short *)buf;
+	if (of_property_read_u64(pdev->dev.of_node,
+				       "gpio-control-nand,io-sync-reg", &addr))
+		return NULL;
 
-		for (i = 0; i < len; i += 2, ptr++)
-			*ptr = readw(this->IO_ADDR_R);
-	}
-}
+	r = devm_kzalloc(&pdev->dev, sizeof(*r), GFP_KERNEL);
+	if (!r)
+		return NULL;
 
-static int gpio_nand_verifybuf16(struct mtd_info *mtd, const u_char *buf,
-				 int len)
+	r->start = addr;
+	r->end = r->start + 0x3;
+	r->flags = IORESOURCE_MEM;
+
+	return r;
+}
+#else /* CONFIG_OF */
+static inline int gpio_nand_get_config_of(const struct device *dev,
+					  struct gpio_nand_platdata *plat)
 {
-	struct nand_chip *this = mtd->priv;
-	unsigned short read, *p = (unsigned short *) buf;
-	int i, err = 0;
-	len >>= 1;
-
-	for (i = 0; i < len; i++) {
-		read = readw(this->IO_ADDR_R);
-		if (read != p[i]) {
-			pr_debug("%s: err at %d (read %04x vs %04x)\n",
-			       __func__, i, read, p[i]);
-			err = -EFAULT;
-		}
-	}
-	return err;
+	return -ENOSYS;
 }
 
-
-static int gpio_nand_devready(struct mtd_info *mtd)
+static inline struct resource *
+gpio_nand_get_io_sync_of(struct platform_device *pdev)
 {
-	struct gpiomtd *gpiomtd = gpio_nand_getpriv(mtd);
-	return gpio_get_value(gpiomtd->plat.gpio_rdy);
+	return NULL;
 }
+#endif /* CONFIG_OF */
 
-static int __devexit gpio_nand_remove(struct platform_device *dev)
+static inline int gpio_nand_get_config(const struct device *dev,
+				       struct gpio_nand_platdata *plat)
 {
-	struct gpiomtd *gpiomtd = platform_get_drvdata(dev);
-	struct resource *res;
+	int ret = gpio_nand_get_config_of(dev, plat);
 
-	nand_release(&gpiomtd->mtd_info);
-
-	res = platform_get_resource(dev, IORESOURCE_MEM, 1);
-	iounmap(gpiomtd->io_sync);
-	if (res)
-		release_mem_region(res->start, resource_size(res));
+	if (!ret)
+		return ret;
 
-	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	iounmap(gpiomtd->nand_chip.IO_ADDR_R);
-	release_mem_region(res->start, resource_size(res));
+	if (dev_get_platdata(dev)) {
+		memcpy(plat, dev_get_platdata(dev), sizeof(*plat));
+		return 0;
+	}
 
-	if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
-		gpio_set_value(gpiomtd->plat.gpio_nwp, 0);
-	gpio_set_value(gpiomtd->plat.gpio_nce, 1);
+	return -EINVAL;
+}
 
-	gpio_free(gpiomtd->plat.gpio_cle);
-	gpio_free(gpiomtd->plat.gpio_ale);
-	gpio_free(gpiomtd->plat.gpio_nce);
-	if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
-		gpio_free(gpiomtd->plat.gpio_nwp);
-	gpio_free(gpiomtd->plat.gpio_rdy);
+static inline struct resource *
+gpio_nand_get_io_sync(struct platform_device *pdev)
+{
+	struct resource *r = gpio_nand_get_io_sync_of(pdev);
 
-	kfree(gpiomtd);
+	if (r)
+		return r;
 
-	return 0;
+	return platform_get_resource(pdev, IORESOURCE_MEM, 1);
 }
 
-static void __iomem *request_and_remap(struct resource *res, size_t size,
-					const char *name, int *err)
+static int gpio_nand_remove(struct platform_device *pdev)
 {
-	void __iomem *ptr;
+	struct gpiomtd *gpiomtd = platform_get_drvdata(pdev);
 
-	if (!request_mem_region(res->start, resource_size(res), name)) {
-		*err = -EBUSY;
-		return NULL;
-	}
+	nand_release(&gpiomtd->mtd_info);
 
-	ptr = ioremap(res->start, size);
-	if (!ptr) {
-		release_mem_region(res->start, resource_size(res));
-		*err = -ENOMEM;
-	}
-	return ptr;
+	if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
+		gpio_set_value(gpiomtd->plat.gpio_nwp, 0);
+	gpio_set_value(gpiomtd->plat.gpio_nce, 1);
+
+	return 0;
 }
 
-static int __devinit gpio_nand_probe(struct platform_device *dev)
+static int gpio_nand_probe(struct platform_device *pdev)
 {
 	struct gpiomtd *gpiomtd;
-	struct nand_chip *this;
-	struct resource *res0, *res1;
-	int ret;
-
-	if (!dev->dev.platform_data)
-		return -EINVAL;
+	struct nand_chip *chip;
+	struct resource *res;
+	struct mtd_part_parser_data ppdata = {};
+	int ret = 0;
 
-	res0 = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	if (!res0)
+	if (!pdev->dev.of_node && !dev_get_platdata(&pdev->dev))
 		return -EINVAL;
 
-	gpiomtd = kzalloc(sizeof(*gpiomtd), GFP_KERNEL);
-	if (gpiomtd == NULL) {
-		dev_err(&dev->dev, "failed to create NAND MTD\n");
+	gpiomtd = devm_kzalloc(&pdev->dev, sizeof(*gpiomtd), GFP_KERNEL);
+	if (!gpiomtd)
 		return -ENOMEM;
-	}
 
-	this = &gpiomtd->nand_chip;
-	this->IO_ADDR_R = request_and_remap(res0, 2, "NAND", &ret);
-	if (!this->IO_ADDR_R) {
-		dev_err(&dev->dev, "unable to map NAND\n");
-		goto err_map;
-	}
+	chip = &gpiomtd->nand_chip;
 
-	res1 = platform_get_resource(dev, IORESOURCE_MEM, 1);
-	if (res1) {
-		gpiomtd->io_sync = request_and_remap(res1, 4, "NAND sync", &ret);
-		if (!gpiomtd->io_sync) {
-			dev_err(&dev->dev, "unable to map sync NAND\n");
-			goto err_sync;
-		}
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	chip->IO_ADDR_R = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(chip->IO_ADDR_R))
+		return PTR_ERR(chip->IO_ADDR_R);
+
+	res = gpio_nand_get_io_sync(pdev);
+	if (res) {
+		gpiomtd->io_sync = devm_ioremap_resource(&pdev->dev, res);
+		if (IS_ERR(gpiomtd->io_sync))
+			return PTR_ERR(gpiomtd->io_sync);
 	}
 
-	memcpy(&gpiomtd->plat, dev->dev.platform_data, sizeof(gpiomtd->plat));
+	ret = gpio_nand_get_config(&pdev->dev, &gpiomtd->plat);
+	if (ret)
+		return ret;
 
-	ret = gpio_request(gpiomtd->plat.gpio_nce, "NAND NCE");
+	ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_nce, "NAND NCE");
 	if (ret)
-		goto err_nce;
+		return ret;
 	gpio_direction_output(gpiomtd->plat.gpio_nce, 1);
+
 	if (gpio_is_valid(gpiomtd->plat.gpio_nwp)) {
-		ret = gpio_request(gpiomtd->plat.gpio_nwp, "NAND NWP");
+		ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_nwp,
+					"NAND NWP");
 		if (ret)
-			goto err_nwp;
-		gpio_direction_output(gpiomtd->plat.gpio_nwp, 1);
+			return ret;
 	}
-	ret = gpio_request(gpiomtd->plat.gpio_ale, "NAND ALE");
+
+	ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_ale, "NAND ALE");
 	if (ret)
-		goto err_ale;
+		return ret;
 	gpio_direction_output(gpiomtd->plat.gpio_ale, 0);
-	ret = gpio_request(gpiomtd->plat.gpio_cle, "NAND CLE");
+
+	ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_cle, "NAND CLE");
 	if (ret)
-		goto err_cle;
+		return ret;
 	gpio_direction_output(gpiomtd->plat.gpio_cle, 0);
-	ret = gpio_request(gpiomtd->plat.gpio_rdy, "NAND RDY");
-	if (ret)
-		goto err_rdy;
-	gpio_direction_input(gpiomtd->plat.gpio_rdy);
-
-
-	this->IO_ADDR_W  = this->IO_ADDR_R;
-	this->ecc.mode   = NAND_ECC_SOFT;
-	this->options    = gpiomtd->plat.options;
-	this->chip_delay = gpiomtd->plat.chip_delay;
-
-	/* install our routines */
-	this->cmd_ctrl   = gpio_nand_cmd_ctrl;
-	this->dev_ready  = gpio_nand_devready;
-
-	if (this->options & NAND_BUSWIDTH_16) {
-		this->read_buf   = gpio_nand_readbuf16;
-		this->write_buf  = gpio_nand_writebuf16;
-		this->verify_buf = gpio_nand_verifybuf16;
-	} else {
-		this->read_buf   = gpio_nand_readbuf;
-		this->write_buf  = gpio_nand_writebuf;
-		this->verify_buf = gpio_nand_verifybuf;
+
+	if (gpio_is_valid(gpiomtd->plat.gpio_rdy)) {
+		ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_rdy,
+					"NAND RDY");
+		if (ret)
+			return ret;
+		gpio_direction_input(gpiomtd->plat.gpio_rdy);
+		chip->dev_ready = gpio_nand_devready;
 	}
 
-	/* set the mtd private data for the nand driver */
-	gpiomtd->mtd_info.priv = this;
-	gpiomtd->mtd_info.owner = THIS_MODULE;
+	chip->IO_ADDR_W		= chip->IO_ADDR_R;
+	chip->ecc.mode		= NAND_ECC_SOFT;
+	chip->options		= gpiomtd->plat.options;
+	chip->chip_delay	= gpiomtd->plat.chip_delay;
+	chip->cmd_ctrl		= gpio_nand_cmd_ctrl;
+
+	gpiomtd->mtd_info.priv	= chip;
+	gpiomtd->mtd_info.owner	= THIS_MODULE;
+
+	platform_set_drvdata(pdev, gpiomtd);
+
+	if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
+		gpio_direction_output(gpiomtd->plat.gpio_nwp, 1);
 
 	if (nand_scan(&gpiomtd->mtd_info, 1)) {
-		dev_err(&dev->dev, "no nand chips found?\n");
 		ret = -ENXIO;
 		goto err_wp;
 	}
@@ -316,34 +289,17 @@ static int __devinit gpio_nand_probe(struct platform_device *dev)
 		gpiomtd->plat.adjust_parts(&gpiomtd->plat,
 					   gpiomtd->mtd_info.size);
 
-	add_mtd_partitions(&gpiomtd->mtd_info, gpiomtd->plat.parts,
-			   gpiomtd->plat.num_parts);
-	platform_set_drvdata(dev, gpiomtd);
-
-	return 0;
+	ppdata.of_node = pdev->dev.of_node;
+	ret = mtd_device_parse_register(&gpiomtd->mtd_info, NULL, &ppdata,
+					gpiomtd->plat.parts,
+					gpiomtd->plat.num_parts);
+	if (!ret)
+		return 0;
 
 err_wp:
 	if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
 		gpio_set_value(gpiomtd->plat.gpio_nwp, 0);
-	gpio_free(gpiomtd->plat.gpio_rdy);
-err_rdy:
-	gpio_free(gpiomtd->plat.gpio_cle);
-err_cle:
-	gpio_free(gpiomtd->plat.gpio_ale);
-err_ale:
-	if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
-		gpio_free(gpiomtd->plat.gpio_nwp);
-err_nwp:
-	gpio_free(gpiomtd->plat.gpio_nce);
-err_nce:
-	iounmap(gpiomtd->io_sync);
-	if (res1)
-		release_mem_region(res1->start, resource_size(res1));
-err_sync:
-	iounmap(gpiomtd->nand_chip.IO_ADDR_R);
-	release_mem_region(res0->start, resource_size(res0));
-err_map:
-	kfree(gpiomtd);
+
 	return ret;
 }
 
@@ -352,23 +308,12 @@ static struct platform_driver gpio_nand_driver = {
 	.remove		= gpio_nand_remove,
 	.driver		= {
 		.name	= "gpio-nand",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(gpio_nand_id_table),
 	},
 };
 
-static int __init gpio_nand_init(void)
-{
-	printk(KERN_INFO "GPIO NAND driver, © 2004 Simtec Electronics\n");
-
-	return platform_driver_register(&gpio_nand_driver);
-}
-
-static void __exit gpio_nand_exit(void)
-{
-	platform_driver_unregister(&gpio_nand_driver);
-}
-
-module_init(gpio_nand_init);
-module_exit(gpio_nand_exit);
+module_platform_driver(gpio_nand_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
diff --git a/drivers/mtd/nand/gpmi-nand/Makefile b/drivers/mtd/nand/gpmi-nand/Makefile
new file mode 100644
index 00000000000..3a462487c35
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi_nand.o
+gpmi_nand-objs += gpmi-nand.o
+gpmi_nand-objs += gpmi-lib.o
diff --git a/drivers/mtd/nand/gpmi-nand/bch-regs.h b/drivers/mtd/nand/gpmi-nand/bch-regs.h
new file mode 100644
index 00000000000..05bb91f2f4c
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/bch-regs.h
@@ -0,0 +1,128 @@
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef __GPMI_NAND_BCH_REGS_H
+#define __GPMI_NAND_BCH_REGS_H
+
+#define HW_BCH_CTRL				0x00000000
+#define HW_BCH_CTRL_SET				0x00000004
+#define HW_BCH_CTRL_CLR				0x00000008
+#define HW_BCH_CTRL_TOG				0x0000000c
+
+#define BM_BCH_CTRL_COMPLETE_IRQ_EN		(1 << 8)
+#define BM_BCH_CTRL_COMPLETE_IRQ		(1 << 0)
+
+#define HW_BCH_STATUS0				0x00000010
+#define HW_BCH_MODE				0x00000020
+#define HW_BCH_ENCODEPTR			0x00000030
+#define HW_BCH_DATAPTR				0x00000040
+#define HW_BCH_METAPTR				0x00000050
+#define HW_BCH_LAYOUTSELECT			0x00000070
+
+#define HW_BCH_FLASH0LAYOUT0			0x00000080
+
+#define BP_BCH_FLASH0LAYOUT0_NBLOCKS		24
+#define BM_BCH_FLASH0LAYOUT0_NBLOCKS	(0xff << BP_BCH_FLASH0LAYOUT0_NBLOCKS)
+#define BF_BCH_FLASH0LAYOUT0_NBLOCKS(v)		\
+	(((v) << BP_BCH_FLASH0LAYOUT0_NBLOCKS) & BM_BCH_FLASH0LAYOUT0_NBLOCKS)
+
+#define BP_BCH_FLASH0LAYOUT0_META_SIZE		16
+#define BM_BCH_FLASH0LAYOUT0_META_SIZE	(0xff << BP_BCH_FLASH0LAYOUT0_META_SIZE)
+#define BF_BCH_FLASH0LAYOUT0_META_SIZE(v)	\
+	(((v) << BP_BCH_FLASH0LAYOUT0_META_SIZE)\
+					 & BM_BCH_FLASH0LAYOUT0_META_SIZE)
+
+#define BP_BCH_FLASH0LAYOUT0_ECC0		12
+#define BM_BCH_FLASH0LAYOUT0_ECC0	(0xf << BP_BCH_FLASH0LAYOUT0_ECC0)
+#define MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0		11
+#define MX6Q_BM_BCH_FLASH0LAYOUT0_ECC0	(0x1f << MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0)
+#define BF_BCH_FLASH0LAYOUT0_ECC0(v, x)				\
+	(GPMI_IS_MX6(x)					\
+		? (((v) << MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0)	\
+			& MX6Q_BM_BCH_FLASH0LAYOUT0_ECC0)	\
+		: (((v) << BP_BCH_FLASH0LAYOUT0_ECC0)		\
+			& BM_BCH_FLASH0LAYOUT0_ECC0)		\
+	)
+
+#define MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14	10
+#define MX6Q_BM_BCH_FLASH0LAYOUT0_GF_13_14			\
+				(0x1 << MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14)
+#define BF_BCH_FLASH0LAYOUT0_GF(v, x)				\
+	((GPMI_IS_MX6(x) && ((v) == 14))			\
+		? (((1) << MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14)	\
+			& MX6Q_BM_BCH_FLASH0LAYOUT0_GF_13_14)	\
+		: 0						\
+	)
+
+#define BP_BCH_FLASH0LAYOUT0_DATA0_SIZE		0
+#define BM_BCH_FLASH0LAYOUT0_DATA0_SIZE		\
+			(0xfff << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)
+#define MX6Q_BM_BCH_FLASH0LAYOUT0_DATA0_SIZE	\
+			(0x3ff << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)
+#define BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(v, x)				\
+	(GPMI_IS_MX6(x)						\
+		? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT0_DATA0_SIZE)	\
+		: ((v) & BM_BCH_FLASH0LAYOUT0_DATA0_SIZE)		\
+	)
+
+#define HW_BCH_FLASH0LAYOUT1			0x00000090
+
+#define BP_BCH_FLASH0LAYOUT1_PAGE_SIZE		16
+#define BM_BCH_FLASH0LAYOUT1_PAGE_SIZE		\
+			(0xffff << BP_BCH_FLASH0LAYOUT1_PAGE_SIZE)
+#define BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(v)	\
+	(((v) << BP_BCH_FLASH0LAYOUT1_PAGE_SIZE) \
+					 & BM_BCH_FLASH0LAYOUT1_PAGE_SIZE)
+
+#define BP_BCH_FLASH0LAYOUT1_ECCN		12
+#define BM_BCH_FLASH0LAYOUT1_ECCN	(0xf << BP_BCH_FLASH0LAYOUT1_ECCN)
+#define MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN		11
+#define MX6Q_BM_BCH_FLASH0LAYOUT1_ECCN	(0x1f << MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN)
+#define BF_BCH_FLASH0LAYOUT1_ECCN(v, x)				\
+	(GPMI_IS_MX6(x)					\
+		? (((v) << MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN)	\
+			& MX6Q_BM_BCH_FLASH0LAYOUT1_ECCN)	\
+		: (((v) << BP_BCH_FLASH0LAYOUT1_ECCN)		\
+			& BM_BCH_FLASH0LAYOUT1_ECCN)		\
+	)
+
+#define MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14	10
+#define MX6Q_BM_BCH_FLASH0LAYOUT1_GF_13_14			\
+				(0x1 << MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14)
+#define BF_BCH_FLASH0LAYOUT1_GF(v, x)				\
+	((GPMI_IS_MX6(x) && ((v) == 14))			\
+		? (((1) << MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14)	\
+			& MX6Q_BM_BCH_FLASH0LAYOUT1_GF_13_14)	\
+		: 0						\
+	)
+
+#define BP_BCH_FLASH0LAYOUT1_DATAN_SIZE		0
+#define BM_BCH_FLASH0LAYOUT1_DATAN_SIZE		\
+			(0xfff << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE)
+#define MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE	\
+			(0x3ff << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE)
+#define BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(v, x)				\
+	(GPMI_IS_MX6(x)						\
+		? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE)	\
+		: ((v) & BM_BCH_FLASH0LAYOUT1_DATAN_SIZE)		\
+	)
+
+#define HW_BCH_VERSION				0x00000160
+#endif
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
new file mode 100644
index 00000000000..87e658ce23e
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
@@ -0,0 +1,1355 @@
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+
+#include "gpmi-nand.h"
+#include "gpmi-regs.h"
+#include "bch-regs.h"
+
+static struct timing_threshod timing_default_threshold = {
+	.max_data_setup_cycles       = (BM_GPMI_TIMING0_DATA_SETUP >>
+						BP_GPMI_TIMING0_DATA_SETUP),
+	.internal_data_setup_in_ns   = 0,
+	.max_sample_delay_factor     = (BM_GPMI_CTRL1_RDN_DELAY >>
+						BP_GPMI_CTRL1_RDN_DELAY),
+	.max_dll_clock_period_in_ns  = 32,
+	.max_dll_delay_in_ns         = 16,
+};
+
+#define MXS_SET_ADDR		0x4
+#define MXS_CLR_ADDR		0x8
+/*
+ * Clear the bit and poll it cleared.  This is usually called with
+ * a reset address and mask being either SFTRST(bit 31) or CLKGATE
+ * (bit 30).
+ */
+static int clear_poll_bit(void __iomem *addr, u32 mask)
+{
+	int timeout = 0x400;
+
+	/* clear the bit */
+	writel(mask, addr + MXS_CLR_ADDR);
+
+	/*
+	 * SFTRST needs 3 GPMI clocks to settle, the reference manual
+	 * recommends to wait 1us.
+	 */
+	udelay(1);
+
+	/* poll the bit becoming clear */
+	while ((readl(addr) & mask) && --timeout)
+		/* nothing */;
+
+	return !timeout;
+}
+
+#define MODULE_CLKGATE		(1 << 30)
+#define MODULE_SFTRST		(1 << 31)
+/*
+ * The current mxs_reset_block() will do two things:
+ *  [1] enable the module.
+ *  [2] reset the module.
+ *
+ * In most of the cases, it's ok.
+ * But in MX23, there is a hardware bug in the BCH block (see erratum #2847).
+ * If you try to soft reset the BCH block, it becomes unusable until
+ * the next hard reset. This case occurs in the NAND boot mode. When the board
+ * boots by NAND, the ROM of the chip will initialize the BCH blocks itself.
+ * So If the driver tries to reset the BCH again, the BCH will not work anymore.
+ * You will see a DMA timeout in this case. The bug has been fixed
+ * in the following chips, such as MX28.
+ *
+ * To avoid this bug, just add a new parameter `just_enable` for
+ * the mxs_reset_block(), and rewrite it here.
+ */
+static int gpmi_reset_block(void __iomem *reset_addr, bool just_enable)
+{
+	int ret;
+	int timeout = 0x400;
+
+	/* clear and poll SFTRST */
+	ret = clear_poll_bit(reset_addr, MODULE_SFTRST);
+	if (unlikely(ret))
+		goto error;
+
+	/* clear CLKGATE */
+	writel(MODULE_CLKGATE, reset_addr + MXS_CLR_ADDR);
+
+	if (!just_enable) {
+		/* set SFTRST to reset the block */
+		writel(MODULE_SFTRST, reset_addr + MXS_SET_ADDR);
+		udelay(1);
+
+		/* poll CLKGATE becoming set */
+		while ((!(readl(reset_addr) & MODULE_CLKGATE)) && --timeout)
+			/* nothing */;
+		if (unlikely(!timeout))
+			goto error;
+	}
+
+	/* clear and poll SFTRST */
+	ret = clear_poll_bit(reset_addr, MODULE_SFTRST);
+	if (unlikely(ret))
+		goto error;
+
+	/* clear and poll CLKGATE */
+	ret = clear_poll_bit(reset_addr, MODULE_CLKGATE);
+	if (unlikely(ret))
+		goto error;
+
+	return 0;
+
+error:
+	pr_err("%s(%p): module reset timeout\n", __func__, reset_addr);
+	return -ETIMEDOUT;
+}
+
+static int __gpmi_enable_clk(struct gpmi_nand_data *this, bool v)
+{
+	struct clk *clk;
+	int ret;
+	int i;
+
+	for (i = 0; i < GPMI_CLK_MAX; i++) {
+		clk = this->resources.clock[i];
+		if (!clk)
+			break;
+
+		if (v) {
+			ret = clk_prepare_enable(clk);
+			if (ret)
+				goto err_clk;
+		} else {
+			clk_disable_unprepare(clk);
+		}
+	}
+	return 0;
+
+err_clk:
+	for (; i > 0; i--)
+		clk_disable_unprepare(this->resources.clock[i - 1]);
+	return ret;
+}
+
+#define gpmi_enable_clk(x) __gpmi_enable_clk(x, true)
+#define gpmi_disable_clk(x) __gpmi_enable_clk(x, false)
+
+int gpmi_init(struct gpmi_nand_data *this)
+{
+	struct resources *r = &this->resources;
+	int ret;
+
+	ret = gpmi_enable_clk(this);
+	if (ret)
+		goto err_out;
+	ret = gpmi_reset_block(r->gpmi_regs, false);
+	if (ret)
+		goto err_out;
+
+	/*
+	 * Reset BCH here, too. We got failures otherwise :(
+	 * See later BCH reset for explanation of MX23 handling
+	 */
+	ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MX23(this));
+	if (ret)
+		goto err_out;
+
+
+	/* Choose NAND mode. */
+	writel(BM_GPMI_CTRL1_GPMI_MODE, r->gpmi_regs + HW_GPMI_CTRL1_CLR);
+
+	/* Set the IRQ polarity. */
+	writel(BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY,
+				r->gpmi_regs + HW_GPMI_CTRL1_SET);
+
+	/* Disable Write-Protection. */
+	writel(BM_GPMI_CTRL1_DEV_RESET, r->gpmi_regs + HW_GPMI_CTRL1_SET);
+
+	/* Select BCH ECC. */
+	writel(BM_GPMI_CTRL1_BCH_MODE, r->gpmi_regs + HW_GPMI_CTRL1_SET);
+
+	/*
+	 * Decouple the chip select from dma channel. We use dma0 for all
+	 * the chips.
+	 */
+	writel(BM_GPMI_CTRL1_DECOUPLE_CS, r->gpmi_regs + HW_GPMI_CTRL1_SET);
+
+	gpmi_disable_clk(this);
+	return 0;
+err_out:
+	return ret;
+}
+
+/* This function is very useful. It is called only when the bug occur. */
+void gpmi_dump_info(struct gpmi_nand_data *this)
+{
+	struct resources *r = &this->resources;
+	struct bch_geometry *geo = &this->bch_geometry;
+	u32 reg;
+	int i;
+
+	dev_err(this->dev, "Show GPMI registers :\n");
+	for (i = 0; i <= HW_GPMI_DEBUG / 0x10 + 1; i++) {
+		reg = readl(r->gpmi_regs + i * 0x10);
+		dev_err(this->dev, "offset 0x%.3x : 0x%.8x\n", i * 0x10, reg);
+	}
+
+	/* start to print out the BCH info */
+	dev_err(this->dev, "Show BCH registers :\n");
+	for (i = 0; i <= HW_BCH_VERSION / 0x10 + 1; i++) {
+		reg = readl(r->bch_regs + i * 0x10);
+		dev_err(this->dev, "offset 0x%.3x : 0x%.8x\n", i * 0x10, reg);
+	}
+	dev_err(this->dev, "BCH Geometry :\n"
+		"GF length              : %u\n"
+		"ECC Strength           : %u\n"
+		"Page Size in Bytes     : %u\n"
+		"Metadata Size in Bytes : %u\n"
+		"ECC Chunk Size in Bytes: %u\n"
+		"ECC Chunk Count        : %u\n"
+		"Payload Size in Bytes  : %u\n"
+		"Auxiliary Size in Bytes: %u\n"
+		"Auxiliary Status Offset: %u\n"
+		"Block Mark Byte Offset : %u\n"
+		"Block Mark Bit Offset  : %u\n",
+		geo->gf_len,
+		geo->ecc_strength,
+		geo->page_size,
+		geo->metadata_size,
+		geo->ecc_chunk_size,
+		geo->ecc_chunk_count,
+		geo->payload_size,
+		geo->auxiliary_size,
+		geo->auxiliary_status_offset,
+		geo->block_mark_byte_offset,
+		geo->block_mark_bit_offset);
+}
+
+/* Configures the geometry for BCH.  */
+int bch_set_geometry(struct gpmi_nand_data *this)
+{
+	struct resources *r = &this->resources;
+	struct bch_geometry *bch_geo = &this->bch_geometry;
+	unsigned int block_count;
+	unsigned int block_size;
+	unsigned int metadata_size;
+	unsigned int ecc_strength;
+	unsigned int page_size;
+	unsigned int gf_len;
+	int ret;
+
+	if (common_nfc_set_geometry(this))
+		return !0;
+
+	block_count   = bch_geo->ecc_chunk_count - 1;
+	block_size    = bch_geo->ecc_chunk_size;
+	metadata_size = bch_geo->metadata_size;
+	ecc_strength  = bch_geo->ecc_strength >> 1;
+	page_size     = bch_geo->page_size;
+	gf_len        = bch_geo->gf_len;
+
+	ret = gpmi_enable_clk(this);
+	if (ret)
+		goto err_out;
+
+	/*
+	* Due to erratum #2847 of the MX23, the BCH cannot be soft reset on this
+	* chip, otherwise it will lock up. So we skip resetting BCH on the MX23.
+	* On the other hand, the MX28 needs the reset, because one case has been
+	* seen where the BCH produced ECC errors constantly after 10000
+	* consecutive reboots. The latter case has not been seen on the MX23
+	* yet, still we don't know if it could happen there as well.
+	*/
+	ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MX23(this));
+	if (ret)
+		goto err_out;
+
+	/* Configure layout 0. */
+	writel(BF_BCH_FLASH0LAYOUT0_NBLOCKS(block_count)
+			| BF_BCH_FLASH0LAYOUT0_META_SIZE(metadata_size)
+			| BF_BCH_FLASH0LAYOUT0_ECC0(ecc_strength, this)
+			| BF_BCH_FLASH0LAYOUT0_GF(gf_len, this)
+			| BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(block_size, this),
+			r->bch_regs + HW_BCH_FLASH0LAYOUT0);
+
+	writel(BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(page_size)
+			| BF_BCH_FLASH0LAYOUT1_ECCN(ecc_strength, this)
+			| BF_BCH_FLASH0LAYOUT1_GF(gf_len, this)
+			| BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(block_size, this),
+			r->bch_regs + HW_BCH_FLASH0LAYOUT1);
+
+	/* Set *all* chip selects to use layout 0. */
+	writel(0, r->bch_regs + HW_BCH_LAYOUTSELECT);
+
+	/* Enable interrupts. */
+	writel(BM_BCH_CTRL_COMPLETE_IRQ_EN,
+				r->bch_regs + HW_BCH_CTRL_SET);
+
+	gpmi_disable_clk(this);
+	return 0;
+err_out:
+	return ret;
+}
+
+/* Converts time in nanoseconds to cycles. */
+static unsigned int ns_to_cycles(unsigned int time,
+			unsigned int period, unsigned int min)
+{
+	unsigned int k;
+
+	k = (time + period - 1) / period;
+	return max(k, min);
+}
+
+#define DEF_MIN_PROP_DELAY	5
+#define DEF_MAX_PROP_DELAY	9
+/* Apply timing to current hardware conditions. */
+static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this,
+					struct gpmi_nfc_hardware_timing *hw)
+{
+	struct timing_threshod *nfc = &timing_default_threshold;
+	struct resources *r = &this->resources;
+	struct nand_chip *nand = &this->nand;
+	struct nand_timing target = this->timing;
+	bool improved_timing_is_available;
+	unsigned long clock_frequency_in_hz;
+	unsigned int clock_period_in_ns;
+	bool dll_use_half_periods;
+	unsigned int dll_delay_shift;
+	unsigned int max_sample_delay_in_ns;
+	unsigned int address_setup_in_cycles;
+	unsigned int data_setup_in_ns;
+	unsigned int data_setup_in_cycles;
+	unsigned int data_hold_in_cycles;
+	int ideal_sample_delay_in_ns;
+	unsigned int sample_delay_factor;
+	int tEYE;
+	unsigned int min_prop_delay_in_ns = DEF_MIN_PROP_DELAY;
+	unsigned int max_prop_delay_in_ns = DEF_MAX_PROP_DELAY;
+
+	/*
+	 * If there are multiple chips, we need to relax the timings to allow
+	 * for signal distortion due to higher capacitance.
+	 */
+	if (nand->numchips > 2) {
+		target.data_setup_in_ns    += 10;
+		target.data_hold_in_ns     += 10;
+		target.address_setup_in_ns += 10;
+	} else if (nand->numchips > 1) {
+		target.data_setup_in_ns    += 5;
+		target.data_hold_in_ns     += 5;
+		target.address_setup_in_ns += 5;
+	}
+
+	/* Check if improved timing information is available. */
+	improved_timing_is_available =
+		(target.tREA_in_ns  >= 0) &&
+		(target.tRLOH_in_ns >= 0) &&
+		(target.tRHOH_in_ns >= 0);
+
+	/* Inspect the clock. */
+	nfc->clock_frequency_in_hz = clk_get_rate(r->clock[0]);
+	clock_frequency_in_hz = nfc->clock_frequency_in_hz;
+	clock_period_in_ns    = NSEC_PER_SEC / clock_frequency_in_hz;
+
+	/*
+	 * The NFC quantizes setup and hold parameters in terms of clock cycles.
+	 * Here, we quantize the setup and hold timing parameters to the
+	 * next-highest clock period to make sure we apply at least the
+	 * specified times.
+	 *
+	 * For data setup and data hold, the hardware interprets a value of zero
+	 * as the largest possible delay. This is not what's intended by a zero
+	 * in the input parameter, so we impose a minimum of one cycle.
+	 */
+	data_setup_in_cycles    = ns_to_cycles(target.data_setup_in_ns,
+							clock_period_in_ns, 1);
+	data_hold_in_cycles     = ns_to_cycles(target.data_hold_in_ns,
+							clock_period_in_ns, 1);
+	address_setup_in_cycles = ns_to_cycles(target.address_setup_in_ns,
+							clock_period_in_ns, 0);
+
+	/*
+	 * The clock's period affects the sample delay in a number of ways:
+	 *
+	 * (1) The NFC HAL tells us the maximum clock period the sample delay
+	 *     DLL can tolerate. If the clock period is greater than half that
+	 *     maximum, we must configure the DLL to be driven by half periods.
+	 *
+	 * (2) We need to convert from an ideal sample delay, in ns, to a
+	 *     "sample delay factor," which the NFC uses. This factor depends on
+	 *     whether we're driving the DLL with full or half periods.
+	 *     Paraphrasing the reference manual:
+	 *
+	 *         AD = SDF x 0.125 x RP
+	 *
+	 * where:
+	 *
+	 *     AD   is the applied delay, in ns.
+	 *     SDF  is the sample delay factor, which is dimensionless.
+	 *     RP   is the reference period, in ns, which is a full clock period
+	 *          if the DLL is being driven by full periods, or half that if
+	 *          the DLL is being driven by half periods.
+	 *
+	 * Let's re-arrange this in a way that's more useful to us:
+	 *
+	 *                        8
+	 *         SDF  =  AD x ----
+	 *                       RP
+	 *
+	 * The reference period is either the clock period or half that, so this
+	 * is:
+	 *
+	 *                        8       AD x DDF
+	 *         SDF  =  AD x -----  =  --------
+	 *                      f x P        P
+	 *
+	 * where:
+	 *
+	 *       f  is 1 or 1/2, depending on how we're driving the DLL.
+	 *       P  is the clock period.
+	 *     DDF  is the DLL Delay Factor, a dimensionless value that
+	 *          incorporates all the constants in the conversion.
+	 *
+	 * DDF will be either 8 or 16, both of which are powers of two. We can
+	 * reduce the cost of this conversion by using bit shifts instead of
+	 * multiplication or division. Thus:
+	 *
+	 *                 AD << DDS
+	 *         SDF  =  ---------
+	 *                     P
+	 *
+	 *     or
+	 *
+	 *         AD  =  (SDF >> DDS) x P
+	 *
+	 * where:
+	 *
+	 *     DDS  is the DLL Delay Shift, the logarithm to base 2 of the DDF.
+	 */
+	if (clock_period_in_ns > (nfc->max_dll_clock_period_in_ns >> 1)) {
+		dll_use_half_periods = true;
+		dll_delay_shift      = 3 + 1;
+	} else {
+		dll_use_half_periods = false;
+		dll_delay_shift      = 3;
+	}
+
+	/*
+	 * Compute the maximum sample delay the NFC allows, under current
+	 * conditions. If the clock is running too slowly, no sample delay is
+	 * possible.
+	 */
+	if (clock_period_in_ns > nfc->max_dll_clock_period_in_ns)
+		max_sample_delay_in_ns = 0;
+	else {
+		/*
+		 * Compute the delay implied by the largest sample delay factor
+		 * the NFC allows.
+		 */
+		max_sample_delay_in_ns =
+			(nfc->max_sample_delay_factor * clock_period_in_ns) >>
+								dll_delay_shift;
+
+		/*
+		 * Check if the implied sample delay larger than the NFC
+		 * actually allows.
+		 */
+		if (max_sample_delay_in_ns > nfc->max_dll_delay_in_ns)
+			max_sample_delay_in_ns = nfc->max_dll_delay_in_ns;
+	}
+
+	/*
+	 * Check if improved timing information is available. If not, we have to
+	 * use a less-sophisticated algorithm.
+	 */
+	if (!improved_timing_is_available) {
+		/*
+		 * Fold the read setup time required by the NFC into the ideal
+		 * sample delay.
+		 */
+		ideal_sample_delay_in_ns = target.gpmi_sample_delay_in_ns +
+						nfc->internal_data_setup_in_ns;
+
+		/*
+		 * The ideal sample delay may be greater than the maximum
+		 * allowed by the NFC. If so, we can trade off sample delay time
+		 * for more data setup time.
+		 *
+		 * In each iteration of the following loop, we add a cycle to
+		 * the data setup time and subtract a corresponding amount from
+		 * the sample delay until we've satisified the constraints or
+		 * can't do any better.
+		 */
+		while ((ideal_sample_delay_in_ns > max_sample_delay_in_ns) &&
+			(data_setup_in_cycles < nfc->max_data_setup_cycles)) {
+
+			data_setup_in_cycles++;
+			ideal_sample_delay_in_ns -= clock_period_in_ns;
+
+			if (ideal_sample_delay_in_ns < 0)
+				ideal_sample_delay_in_ns = 0;
+
+		}
+
+		/*
+		 * Compute the sample delay factor that corresponds most closely
+		 * to the ideal sample delay. If the result is too large for the
+		 * NFC, use the maximum value.
+		 *
+		 * Notice that we use the ns_to_cycles function to compute the
+		 * sample delay factor. We do this because the form of the
+		 * computation is the same as that for calculating cycles.
+		 */
+		sample_delay_factor =
+			ns_to_cycles(
+				ideal_sample_delay_in_ns << dll_delay_shift,
+							clock_period_in_ns, 0);
+
+		if (sample_delay_factor > nfc->max_sample_delay_factor)
+			sample_delay_factor = nfc->max_sample_delay_factor;
+
+		/* Skip to the part where we return our results. */
+		goto return_results;
+	}
+
+	/*
+	 * If control arrives here, we have more detailed timing information,
+	 * so we can use a better algorithm.
+	 */
+
+	/*
+	 * Fold the read setup time required by the NFC into the maximum
+	 * propagation delay.
+	 */
+	max_prop_delay_in_ns += nfc->internal_data_setup_in_ns;
+
+	/*
+	 * Earlier, we computed the number of clock cycles required to satisfy
+	 * the data setup time. Now, we need to know the actual nanoseconds.
+	 */
+	data_setup_in_ns = clock_period_in_ns * data_setup_in_cycles;
+
+	/*
+	 * Compute tEYE, the width of the data eye when reading from the NAND
+	 * Flash. The eye width is fundamentally determined by the data setup
+	 * time, perturbed by propagation delays and some characteristics of the
+	 * NAND Flash device.
+	 *
+	 * start of the eye = max_prop_delay + tREA
+	 * end of the eye   = min_prop_delay + tRHOH + data_setup
+	 */
+	tEYE = (int)min_prop_delay_in_ns + (int)target.tRHOH_in_ns +
+							(int)data_setup_in_ns;
+
+	tEYE -= (int)max_prop_delay_in_ns + (int)target.tREA_in_ns;
+
+	/*
+	 * The eye must be open. If it's not, we can try to open it by
+	 * increasing its main forcer, the data setup time.
+	 *
+	 * In each iteration of the following loop, we increase the data setup
+	 * time by a single clock cycle. We do this until either the eye is
+	 * open or we run into NFC limits.
+	 */
+	while ((tEYE <= 0) &&
+			(data_setup_in_cycles < nfc->max_data_setup_cycles)) {
+		/* Give a cycle to data setup. */
+		data_setup_in_cycles++;
+		/* Synchronize the data setup time with the cycles. */
+		data_setup_in_ns += clock_period_in_ns;
+		/* Adjust tEYE accordingly. */
+		tEYE += clock_period_in_ns;
+	}
+
+	/*
+	 * When control arrives here, the eye is open. The ideal time to sample
+	 * the data is in the center of the eye:
+	 *
+	 *     end of the eye + start of the eye
+	 *     ---------------------------------  -  data_setup
+	 *                    2
+	 *
+	 * After some algebra, this simplifies to the code immediately below.
+	 */
+	ideal_sample_delay_in_ns =
+		((int)max_prop_delay_in_ns +
+			(int)target.tREA_in_ns +
+				(int)min_prop_delay_in_ns +
+					(int)target.tRHOH_in_ns -
+						(int)data_setup_in_ns) >> 1;
+
+	/*
+	 * The following figure illustrates some aspects of a NAND Flash read:
+	 *
+	 *
+	 *           __                   _____________________________________
+	 * RDN         \_________________/
+	 *
+	 *                                         <---- tEYE ----->
+	 *                                        /-----------------\
+	 * Read Data ----------------------------<                   >---------
+	 *                                        \-----------------/
+	 *             ^                 ^                 ^              ^
+	 *             |                 |                 |              |
+	 *             |<--Data Setup -->|<--Delay Time -->|              |
+	 *             |                 |                 |              |
+	 *             |                 |                                |
+	 *             |                 |<--   Quantized Delay Time   -->|
+	 *             |                 |                                |
+	 *
+	 *
+	 * We have some issues we must now address:
+	 *
+	 * (1) The *ideal* sample delay time must not be negative. If it is, we
+	 *     jam it to zero.
+	 *
+	 * (2) The *ideal* sample delay time must not be greater than that
+	 *     allowed by the NFC. If it is, we can increase the data setup
+	 *     time, which will reduce the delay between the end of the data
+	 *     setup and the center of the eye. It will also make the eye
+	 *     larger, which might help with the next issue...
+	 *
+	 * (3) The *quantized* sample delay time must not fall either before the
+	 *     eye opens or after it closes (the latter is the problem
+	 *     illustrated in the above figure).
+	 */
+
+	/* Jam a negative ideal sample delay to zero. */
+	if (ideal_sample_delay_in_ns < 0)
+		ideal_sample_delay_in_ns = 0;
+
+	/*
+	 * Extend the data setup as needed to reduce the ideal sample delay
+	 * below the maximum permitted by the NFC.
+	 */
+	while ((ideal_sample_delay_in_ns > max_sample_delay_in_ns) &&
+			(data_setup_in_cycles < nfc->max_data_setup_cycles)) {
+
+		/* Give a cycle to data setup. */
+		data_setup_in_cycles++;
+		/* Synchronize the data setup time with the cycles. */
+		data_setup_in_ns += clock_period_in_ns;
+		/* Adjust tEYE accordingly. */
+		tEYE += clock_period_in_ns;
+
+		/*
+		 * Decrease the ideal sample delay by one half cycle, to keep it
+		 * in the middle of the eye.
+		 */
+		ideal_sample_delay_in_ns -= (clock_period_in_ns >> 1);
+
+		/* Jam a negative ideal sample delay to zero. */
+		if (ideal_sample_delay_in_ns < 0)
+			ideal_sample_delay_in_ns = 0;
+	}
+
+	/*
+	 * Compute the sample delay factor that corresponds to the ideal sample
+	 * delay. If the result is too large, then use the maximum allowed
+	 * value.
+	 *
+	 * Notice that we use the ns_to_cycles function to compute the sample
+	 * delay factor. We do this because the form of the computation is the
+	 * same as that for calculating cycles.
+	 */
+	sample_delay_factor =
+		ns_to_cycles(ideal_sample_delay_in_ns << dll_delay_shift,
+							clock_period_in_ns, 0);
+
+	if (sample_delay_factor > nfc->max_sample_delay_factor)
+		sample_delay_factor = nfc->max_sample_delay_factor;
+
+	/*
+	 * These macros conveniently encapsulate a computation we'll use to
+	 * continuously evaluate whether or not the data sample delay is inside
+	 * the eye.
+	 */
+	#define IDEAL_DELAY  ((int) ideal_sample_delay_in_ns)
+
+	#define QUANTIZED_DELAY  \
+		((int) ((sample_delay_factor * clock_period_in_ns) >> \
+							dll_delay_shift))
+
+	#define DELAY_ERROR  (abs(QUANTIZED_DELAY - IDEAL_DELAY))
+
+	#define SAMPLE_IS_NOT_WITHIN_THE_EYE  (DELAY_ERROR > (tEYE >> 1))
+
+	/*
+	 * While the quantized sample time falls outside the eye, reduce the
+	 * sample delay or extend the data setup to move the sampling point back
+	 * toward the eye. Do not allow the number of data setup cycles to
+	 * exceed the maximum allowed by the NFC.
+	 */
+	while (SAMPLE_IS_NOT_WITHIN_THE_EYE &&
+			(data_setup_in_cycles < nfc->max_data_setup_cycles)) {
+		/*
+		 * If control arrives here, the quantized sample delay falls
+		 * outside the eye. Check if it's before the eye opens, or after
+		 * the eye closes.
+		 */
+		if (QUANTIZED_DELAY > IDEAL_DELAY) {
+			/*
+			 * If control arrives here, the quantized sample delay
+			 * falls after the eye closes. Decrease the quantized
+			 * delay time and then go back to re-evaluate.
+			 */
+			if (sample_delay_factor != 0)
+				sample_delay_factor--;
+			continue;
+		}
+
+		/*
+		 * If control arrives here, the quantized sample delay falls
+		 * before the eye opens. Shift the sample point by increasing
+		 * data setup time. This will also make the eye larger.
+		 */
+
+		/* Give a cycle to data setup. */
+		data_setup_in_cycles++;
+		/* Synchronize the data setup time with the cycles. */
+		data_setup_in_ns += clock_period_in_ns;
+		/* Adjust tEYE accordingly. */
+		tEYE += clock_period_in_ns;
+
+		/*
+		 * Decrease the ideal sample delay by one half cycle, to keep it
+		 * in the middle of the eye.
+		 */
+		ideal_sample_delay_in_ns -= (clock_period_in_ns >> 1);
+
+		/* ...and one less period for the delay time. */
+		ideal_sample_delay_in_ns -= clock_period_in_ns;
+
+		/* Jam a negative ideal sample delay to zero. */
+		if (ideal_sample_delay_in_ns < 0)
+			ideal_sample_delay_in_ns = 0;
+
+		/*
+		 * We have a new ideal sample delay, so re-compute the quantized
+		 * delay.
+		 */
+		sample_delay_factor =
+			ns_to_cycles(
+				ideal_sample_delay_in_ns << dll_delay_shift,
+							clock_period_in_ns, 0);
+
+		if (sample_delay_factor > nfc->max_sample_delay_factor)
+			sample_delay_factor = nfc->max_sample_delay_factor;
+	}
+
+	/* Control arrives here when we're ready to return our results. */
+return_results:
+	hw->data_setup_in_cycles    = data_setup_in_cycles;
+	hw->data_hold_in_cycles     = data_hold_in_cycles;
+	hw->address_setup_in_cycles = address_setup_in_cycles;
+	hw->use_half_periods        = dll_use_half_periods;
+	hw->sample_delay_factor     = sample_delay_factor;
+	hw->device_busy_timeout     = GPMI_DEFAULT_BUSY_TIMEOUT;
+	hw->wrn_dly_sel             = BV_GPMI_CTRL1_WRN_DLY_SEL_4_TO_8NS;
+
+	/* Return success. */
+	return 0;
+}
+
+/*
+ * <1> Firstly, we should know what's the GPMI-clock means.
+ *     The GPMI-clock is the internal clock in the gpmi nand controller.
+ *     If you set 100MHz to gpmi nand controller, the GPMI-clock's period
+ *     is 10ns. Mark the GPMI-clock's period as GPMI-clock-period.
+ *
+ * <2> Secondly, we should know what's the frequency on the nand chip pins.
+ *     The frequency on the nand chip pins is derived from the GPMI-clock.
+ *     We can get it from the following equation:
+ *
+ *         F = G / (DS + DH)
+ *
+ *         F  : the frequency on the nand chip pins.
+ *         G  : the GPMI clock, such as 100MHz.
+ *         DS : GPMI_HW_GPMI_TIMING0:DATA_SETUP
+ *         DH : GPMI_HW_GPMI_TIMING0:DATA_HOLD
+ *
+ * <3> Thirdly, when the frequency on the nand chip pins is above 33MHz,
+ *     the nand EDO(extended Data Out) timing could be applied.
+ *     The GPMI implements a feedback read strobe to sample the read data.
+ *     The feedback read strobe can be delayed to support the nand EDO timing
+ *     where the read strobe may deasserts before the read data is valid, and
+ *     read data is valid for some time after read strobe.
+ *
+ *     The following figure illustrates some aspects of a NAND Flash read:
+ *
+ *                   |<---tREA---->|
+ *                   |             |
+ *                   |         |   |
+ *                   |<--tRP-->|   |
+ *                   |         |   |
+ *                  __          ___|__________________________________
+ *     RDN            \________/   |
+ *                                 |
+ *                                 /---------\
+ *     Read Data    --------------<           >---------
+ *                                 \---------/
+ *                                |     |
+ *                                |<-D->|
+ *     FeedbackRDN  ________             ____________
+ *                          \___________/
+ *
+ *          D stands for delay, set in the HW_GPMI_CTRL1:RDN_DELAY.
+ *
+ *
+ * <4> Now, we begin to describe how to compute the right RDN_DELAY.
+ *
+ *  4.1) From the aspect of the nand chip pins:
+ *        Delay = (tREA + C - tRP)               {1}
+ *
+ *        tREA : the maximum read access time. From the ONFI nand standards,
+ *               we know that tREA is 16ns in mode 5, tREA is 20ns is mode 4.
+ *               Please check it in : www.onfi.org
+ *        C    : a constant for adjust the delay. default is 4.
+ *        tRP  : the read pulse width.
+ *               Specified by the HW_GPMI_TIMING0:DATA_SETUP:
+ *                    tRP = (GPMI-clock-period) * DATA_SETUP
+ *
+ *  4.2) From the aspect of the GPMI nand controller:
+ *         Delay = RDN_DELAY * 0.125 * RP        {2}
+ *
+ *         RP   : the DLL reference period.
+ *            if (GPMI-clock-period > DLL_THRETHOLD)
+ *                   RP = GPMI-clock-period / 2;
+ *            else
+ *                   RP = GPMI-clock-period;
+ *
+ *            Set the HW_GPMI_CTRL1:HALF_PERIOD if GPMI-clock-period
+ *            is greater DLL_THRETHOLD. In other SOCs, the DLL_THRETHOLD
+ *            is 16ns, but in mx6q, we use 12ns.
+ *
+ *  4.3) since {1} equals {2}, we get:
+ *
+ *                    (tREA + 4 - tRP) * 8
+ *         RDN_DELAY = ---------------------     {3}
+ *                           RP
+ *
+ *  4.4) We only support the fastest asynchronous mode of ONFI nand.
+ *       For some ONFI nand, the mode 4 is the fastest mode;
+ *       while for some ONFI nand, the mode 5 is the fastest mode.
+ *       So we only support the mode 4 and mode 5. It is no need to
+ *       support other modes.
+ */
+static void gpmi_compute_edo_timing(struct gpmi_nand_data *this,
+			struct gpmi_nfc_hardware_timing *hw)
+{
+	struct resources *r = &this->resources;
+	unsigned long rate = clk_get_rate(r->clock[0]);
+	int mode = this->timing_mode;
+	int dll_threshold = this->devdata->max_chain_delay;
+	unsigned long delay;
+	unsigned long clk_period;
+	int t_rea;
+	int c = 4;
+	int t_rp;
+	int rp;
+
+	/*
+	 * [1] for GPMI_HW_GPMI_TIMING0:
+	 *     The async mode requires 40MHz for mode 4, 50MHz for mode 5.
+	 *     The GPMI can support 100MHz at most. So if we want to
+	 *     get the 40MHz or 50MHz, we have to set DS=1, DH=1.
+	 *     Set the ADDRESS_SETUP to 0 in mode 4.
+	 */
+	hw->data_setup_in_cycles = 1;
+	hw->data_hold_in_cycles = 1;
+	hw->address_setup_in_cycles = ((mode == 5) ? 1 : 0);
+
+	/* [2] for GPMI_HW_GPMI_TIMING1 */
+	hw->device_busy_timeout = 0x9000;
+
+	/* [3] for GPMI_HW_GPMI_CTRL1 */
+	hw->wrn_dly_sel = BV_GPMI_CTRL1_WRN_DLY_SEL_NO_DELAY;
+
+	/*
+	 * Enlarge 10 times for the numerator and denominator in {3}.
+	 * This make us to get more accurate result.
+	 */
+	clk_period = NSEC_PER_SEC / (rate / 10);
+	dll_threshold *= 10;
+	t_rea = ((mode == 5) ? 16 : 20) * 10;
+	c *= 10;
+
+	t_rp = clk_period * 1; /* DATA_SETUP is 1 */
+
+	if (clk_period > dll_threshold) {
+		hw->use_half_periods = 1;
+		rp = clk_period / 2;
+	} else {
+		hw->use_half_periods = 0;
+		rp = clk_period;
+	}
+
+	/*
+	 * Multiply the numerator with 10, we could do a round off:
+	 *      7.8 round up to 8; 7.4 round down to 7.
+	 */
+	delay  = (((t_rea + c - t_rp) * 8) * 10) / rp;
+	delay = (delay + 5) / 10;
+
+	hw->sample_delay_factor = delay;
+}
+
+static int enable_edo_mode(struct gpmi_nand_data *this, int mode)
+{
+	struct resources  *r = &this->resources;
+	struct nand_chip *nand = &this->nand;
+	struct mtd_info	 *mtd = &this->mtd;
+	uint8_t *feature;
+	unsigned long rate;
+	int ret;
+
+	feature = kzalloc(ONFI_SUBFEATURE_PARAM_LEN, GFP_KERNEL);
+	if (!feature)
+		return -ENOMEM;
+
+	nand->select_chip(mtd, 0);
+
+	/* [1] send SET FEATURE commond to NAND */
+	feature[0] = mode;
+	ret = nand->onfi_set_features(mtd, nand,
+				ONFI_FEATURE_ADDR_TIMING_MODE, feature);
+	if (ret)
+		goto err_out;
+
+	/* [2] send GET FEATURE command to double-check the timing mode */
+	memset(feature, 0, ONFI_SUBFEATURE_PARAM_LEN);
+	ret = nand->onfi_get_features(mtd, nand,
+				ONFI_FEATURE_ADDR_TIMING_MODE, feature);
+	if (ret || feature[0] != mode)
+		goto err_out;
+
+	nand->select_chip(mtd, -1);
+
+	/* [3] set the main IO clock, 100MHz for mode 5, 80MHz for mode 4. */
+	rate = (mode == 5) ? 100000000 : 80000000;
+	clk_set_rate(r->clock[0], rate);
+
+	/* Let the gpmi_begin() re-compute the timing again. */
+	this->flags &= ~GPMI_TIMING_INIT_OK;
+
+	this->flags |= GPMI_ASYNC_EDO_ENABLED;
+	this->timing_mode = mode;
+	kfree(feature);
+	dev_info(this->dev, "enable the asynchronous EDO mode %d\n", mode);
+	return 0;
+
+err_out:
+	nand->select_chip(mtd, -1);
+	kfree(feature);
+	dev_err(this->dev, "mode:%d ,failed in set feature.\n", mode);
+	return -EINVAL;
+}
+
+int gpmi_extra_init(struct gpmi_nand_data *this)
+{
+	struct nand_chip *chip = &this->nand;
+
+	/* Enable the asynchronous EDO feature. */
+	if (GPMI_IS_MX6(this) && chip->onfi_version) {
+		int mode = onfi_get_async_timing_mode(chip);
+
+		/* We only support the timing mode 4 and mode 5. */
+		if (mode & ONFI_TIMING_MODE_5)
+			mode = 5;
+		else if (mode & ONFI_TIMING_MODE_4)
+			mode = 4;
+		else
+			return 0;
+
+		return enable_edo_mode(this, mode);
+	}
+	return 0;
+}
+
+/* Begin the I/O */
+void gpmi_begin(struct gpmi_nand_data *this)
+{
+	struct resources *r = &this->resources;
+	void __iomem *gpmi_regs = r->gpmi_regs;
+	unsigned int   clock_period_in_ns;
+	uint32_t       reg;
+	unsigned int   dll_wait_time_in_us;
+	struct gpmi_nfc_hardware_timing  hw;
+	int ret;
+
+	/* Enable the clock. */
+	ret = gpmi_enable_clk(this);
+	if (ret) {
+		dev_err(this->dev, "We failed in enable the clk\n");
+		goto err_out;
+	}
+
+	/* Only initialize the timing once */
+	if (this->flags & GPMI_TIMING_INIT_OK)
+		return;
+	this->flags |= GPMI_TIMING_INIT_OK;
+
+	if (this->flags & GPMI_ASYNC_EDO_ENABLED)
+		gpmi_compute_edo_timing(this, &hw);
+	else
+		gpmi_nfc_compute_hardware_timing(this, &hw);
+
+	/* [1] Set HW_GPMI_TIMING0 */
+	reg = BF_GPMI_TIMING0_ADDRESS_SETUP(hw.address_setup_in_cycles) |
+		BF_GPMI_TIMING0_DATA_HOLD(hw.data_hold_in_cycles)         |
+		BF_GPMI_TIMING0_DATA_SETUP(hw.data_setup_in_cycles);
+
+	writel(reg, gpmi_regs + HW_GPMI_TIMING0);
+
+	/* [2] Set HW_GPMI_TIMING1 */
+	writel(BF_GPMI_TIMING1_BUSY_TIMEOUT(hw.device_busy_timeout),
+		gpmi_regs + HW_GPMI_TIMING1);
+
+	/* [3] The following code is to set the HW_GPMI_CTRL1. */
+
+	/* Set the WRN_DLY_SEL */
+	writel(BM_GPMI_CTRL1_WRN_DLY_SEL, gpmi_regs + HW_GPMI_CTRL1_CLR);
+	writel(BF_GPMI_CTRL1_WRN_DLY_SEL(hw.wrn_dly_sel),
+					gpmi_regs + HW_GPMI_CTRL1_SET);
+
+	/* DLL_ENABLE must be set to 0 when setting RDN_DELAY or HALF_PERIOD. */
+	writel(BM_GPMI_CTRL1_DLL_ENABLE, gpmi_regs + HW_GPMI_CTRL1_CLR);
+
+	/* Clear out the DLL control fields. */
+	reg = BM_GPMI_CTRL1_RDN_DELAY | BM_GPMI_CTRL1_HALF_PERIOD;
+	writel(reg, gpmi_regs + HW_GPMI_CTRL1_CLR);
+
+	/* If no sample delay is called for, return immediately. */
+	if (!hw.sample_delay_factor)
+		return;
+
+	/* Set RDN_DELAY or HALF_PERIOD. */
+	reg = ((hw.use_half_periods) ? BM_GPMI_CTRL1_HALF_PERIOD : 0)
+		| BF_GPMI_CTRL1_RDN_DELAY(hw.sample_delay_factor);
+
+	writel(reg, gpmi_regs + HW_GPMI_CTRL1_SET);
+
+	/* At last, we enable the DLL. */
+	writel(BM_GPMI_CTRL1_DLL_ENABLE, gpmi_regs + HW_GPMI_CTRL1_SET);
+
+	/*
+	 * After we enable the GPMI DLL, we have to wait 64 clock cycles before
+	 * we can use the GPMI. Calculate the amount of time we need to wait,
+	 * in microseconds.
+	 */
+	clock_period_in_ns = NSEC_PER_SEC / clk_get_rate(r->clock[0]);
+	dll_wait_time_in_us = (clock_period_in_ns * 64) / 1000;
+
+	if (!dll_wait_time_in_us)
+		dll_wait_time_in_us = 1;
+
+	/* Wait for the DLL to settle. */
+	udelay(dll_wait_time_in_us);
+
+err_out:
+	return;
+}
+
+void gpmi_end(struct gpmi_nand_data *this)
+{
+	gpmi_disable_clk(this);
+}
+
+/* Clears a BCH interrupt. */
+void gpmi_clear_bch(struct gpmi_nand_data *this)
+{
+	struct resources *r = &this->resources;
+	writel(BM_BCH_CTRL_COMPLETE_IRQ, r->bch_regs + HW_BCH_CTRL_CLR);
+}
+
+/* Returns the Ready/Busy status of the given chip. */
+int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip)
+{
+	struct resources *r = &this->resources;
+	uint32_t mask = 0;
+	uint32_t reg = 0;
+
+	if (GPMI_IS_MX23(this)) {
+		mask = MX23_BM_GPMI_DEBUG_READY0 << chip;
+		reg = readl(r->gpmi_regs + HW_GPMI_DEBUG);
+	} else if (GPMI_IS_MX28(this) || GPMI_IS_MX6(this)) {
+		/*
+		 * In the imx6, all the ready/busy pins are bound
+		 * together. So we only need to check chip 0.
+		 */
+		if (GPMI_IS_MX6(this))
+			chip = 0;
+
+		/* MX28 shares the same R/B register as MX6Q. */
+		mask = MX28_BF_GPMI_STAT_READY_BUSY(1 << chip);
+		reg = readl(r->gpmi_regs + HW_GPMI_STAT);
+	} else
+		dev_err(this->dev, "unknow arch.\n");
+	return reg & mask;
+}
+
+static inline void set_dma_type(struct gpmi_nand_data *this,
+					enum dma_ops_type type)
+{
+	this->last_dma_type = this->dma_type;
+	this->dma_type = type;
+}
+
+int gpmi_send_command(struct gpmi_nand_data *this)
+{
+	struct dma_chan *channel = get_dma_chan(this);
+	struct dma_async_tx_descriptor *desc;
+	struct scatterlist *sgl;
+	int chip = this->current_chip;
+	u32 pio[3];
+
+	/* [1] send out the PIO words */
+	pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__WRITE)
+		| BM_GPMI_CTRL0_WORD_LENGTH
+		| BF_GPMI_CTRL0_CS(chip, this)
+		| BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+		| BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_CLE)
+		| BM_GPMI_CTRL0_ADDRESS_INCREMENT
+		| BF_GPMI_CTRL0_XFER_COUNT(this->command_length);
+	pio[1] = pio[2] = 0;
+	desc = dmaengine_prep_slave_sg(channel,
+					(struct scatterlist *)pio,
+					ARRAY_SIZE(pio), DMA_TRANS_NONE, 0);
+	if (!desc)
+		return -EINVAL;
+
+	/* [2] send out the COMMAND + ADDRESS string stored in @buffer */
+	sgl = &this->cmd_sgl;
+
+	sg_init_one(sgl, this->cmd_buffer, this->command_length);
+	dma_map_sg(this->dev, sgl, 1, DMA_TO_DEVICE);
+	desc = dmaengine_prep_slave_sg(channel,
+				sgl, 1, DMA_MEM_TO_DEV,
+				DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!desc)
+		return -EINVAL;
+
+	/* [3] submit the DMA */
+	set_dma_type(this, DMA_FOR_COMMAND);
+	return start_dma_without_bch_irq(this, desc);
+}
+
+int gpmi_send_data(struct gpmi_nand_data *this)
+{
+	struct dma_async_tx_descriptor *desc;
+	struct dma_chan *channel = get_dma_chan(this);
+	int chip = this->current_chip;
+	uint32_t command_mode;
+	uint32_t address;
+	u32 pio[2];
+
+	/* [1] PIO */
+	command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WRITE;
+	address      = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+
+	pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+		| BM_GPMI_CTRL0_WORD_LENGTH
+		| BF_GPMI_CTRL0_CS(chip, this)
+		| BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+		| BF_GPMI_CTRL0_ADDRESS(address)
+		| BF_GPMI_CTRL0_XFER_COUNT(this->upper_len);
+	pio[1] = 0;
+	desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio,
+					ARRAY_SIZE(pio), DMA_TRANS_NONE, 0);
+	if (!desc)
+		return -EINVAL;
+
+	/* [2] send DMA request */
+	prepare_data_dma(this, DMA_TO_DEVICE);
+	desc = dmaengine_prep_slave_sg(channel, &this->data_sgl,
+					1, DMA_MEM_TO_DEV,
+					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!desc)
+		return -EINVAL;
+
+	/* [3] submit the DMA */
+	set_dma_type(this, DMA_FOR_WRITE_DATA);
+	return start_dma_without_bch_irq(this, desc);
+}
+
+int gpmi_read_data(struct gpmi_nand_data *this)
+{
+	struct dma_async_tx_descriptor *desc;
+	struct dma_chan *channel = get_dma_chan(this);
+	int chip = this->current_chip;
+	u32 pio[2];
+
+	/* [1] : send PIO */
+	pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__READ)
+		| BM_GPMI_CTRL0_WORD_LENGTH
+		| BF_GPMI_CTRL0_CS(chip, this)
+		| BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+		| BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_DATA)
+		| BF_GPMI_CTRL0_XFER_COUNT(this->upper_len);
+	pio[1] = 0;
+	desc = dmaengine_prep_slave_sg(channel,
+					(struct scatterlist *)pio,
+					ARRAY_SIZE(pio), DMA_TRANS_NONE, 0);
+	if (!desc)
+		return -EINVAL;
+
+	/* [2] : send DMA request */
+	prepare_data_dma(this, DMA_FROM_DEVICE);
+	desc = dmaengine_prep_slave_sg(channel, &this->data_sgl,
+					1, DMA_DEV_TO_MEM,
+					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!desc)
+		return -EINVAL;
+
+	/* [3] : submit the DMA */
+	set_dma_type(this, DMA_FOR_READ_DATA);
+	return start_dma_without_bch_irq(this, desc);
+}
+
+int gpmi_send_page(struct gpmi_nand_data *this,
+			dma_addr_t payload, dma_addr_t auxiliary)
+{
+	struct bch_geometry *geo = &this->bch_geometry;
+	uint32_t command_mode;
+	uint32_t address;
+	uint32_t ecc_command;
+	uint32_t buffer_mask;
+	struct dma_async_tx_descriptor *desc;
+	struct dma_chan *channel = get_dma_chan(this);
+	int chip = this->current_chip;
+	u32 pio[6];
+
+	/* A DMA descriptor that does an ECC page read. */
+	command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WRITE;
+	address      = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+	ecc_command  = BV_GPMI_ECCCTRL_ECC_CMD__BCH_ENCODE;
+	buffer_mask  = BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE |
+				BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY;
+
+	pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+		| BM_GPMI_CTRL0_WORD_LENGTH
+		| BF_GPMI_CTRL0_CS(chip, this)
+		| BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+		| BF_GPMI_CTRL0_ADDRESS(address)
+		| BF_GPMI_CTRL0_XFER_COUNT(0);
+	pio[1] = 0;
+	pio[2] = BM_GPMI_ECCCTRL_ENABLE_ECC
+		| BF_GPMI_ECCCTRL_ECC_CMD(ecc_command)
+		| BF_GPMI_ECCCTRL_BUFFER_MASK(buffer_mask);
+	pio[3] = geo->page_size;
+	pio[4] = payload;
+	pio[5] = auxiliary;
+
+	desc = dmaengine_prep_slave_sg(channel,
+					(struct scatterlist *)pio,
+					ARRAY_SIZE(pio), DMA_TRANS_NONE,
+					DMA_CTRL_ACK);
+	if (!desc)
+		return -EINVAL;
+
+	set_dma_type(this, DMA_FOR_WRITE_ECC_PAGE);
+	return start_dma_with_bch_irq(this, desc);
+}
+
+int gpmi_read_page(struct gpmi_nand_data *this,
+				dma_addr_t payload, dma_addr_t auxiliary)
+{
+	struct bch_geometry *geo = &this->bch_geometry;
+	uint32_t command_mode;
+	uint32_t address;
+	uint32_t ecc_command;
+	uint32_t buffer_mask;
+	struct dma_async_tx_descriptor *desc;
+	struct dma_chan *channel = get_dma_chan(this);
+	int chip = this->current_chip;
+	u32 pio[6];
+
+	/* [1] Wait for the chip to report ready. */
+	command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY;
+	address      = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+
+	pio[0] =  BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+		| BM_GPMI_CTRL0_WORD_LENGTH
+		| BF_GPMI_CTRL0_CS(chip, this)
+		| BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+		| BF_GPMI_CTRL0_ADDRESS(address)
+		| BF_GPMI_CTRL0_XFER_COUNT(0);
+	pio[1] = 0;
+	desc = dmaengine_prep_slave_sg(channel,
+				(struct scatterlist *)pio, 2,
+				DMA_TRANS_NONE, 0);
+	if (!desc)
+		return -EINVAL;
+
+	/* [2] Enable the BCH block and read. */
+	command_mode = BV_GPMI_CTRL0_COMMAND_MODE__READ;
+	address      = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+	ecc_command  = BV_GPMI_ECCCTRL_ECC_CMD__BCH_DECODE;
+	buffer_mask  = BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE
+			| BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY;
+
+	pio[0] =  BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+		| BM_GPMI_CTRL0_WORD_LENGTH
+		| BF_GPMI_CTRL0_CS(chip, this)
+		| BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+		| BF_GPMI_CTRL0_ADDRESS(address)
+		| BF_GPMI_CTRL0_XFER_COUNT(geo->page_size);
+
+	pio[1] = 0;
+	pio[2] =  BM_GPMI_ECCCTRL_ENABLE_ECC
+		| BF_GPMI_ECCCTRL_ECC_CMD(ecc_command)
+		| BF_GPMI_ECCCTRL_BUFFER_MASK(buffer_mask);
+	pio[3] = geo->page_size;
+	pio[4] = payload;
+	pio[5] = auxiliary;
+	desc = dmaengine_prep_slave_sg(channel,
+					(struct scatterlist *)pio,
+					ARRAY_SIZE(pio), DMA_TRANS_NONE,
+					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!desc)
+		return -EINVAL;
+
+	/* [3] Disable the BCH block */
+	command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY;
+	address      = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+
+	pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+		| BM_GPMI_CTRL0_WORD_LENGTH
+		| BF_GPMI_CTRL0_CS(chip, this)
+		| BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+		| BF_GPMI_CTRL0_ADDRESS(address)
+		| BF_GPMI_CTRL0_XFER_COUNT(geo->page_size);
+	pio[1] = 0;
+	pio[2] = 0; /* clear GPMI_HW_GPMI_ECCCTRL, disable the BCH. */
+	desc = dmaengine_prep_slave_sg(channel,
+				(struct scatterlist *)pio, 3,
+				DMA_TRANS_NONE,
+				DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!desc)
+		return -EINVAL;
+
+	/* [4] submit the DMA */
+	set_dma_type(this, DMA_FOR_READ_ECC_PAGE);
+	return start_dma_with_bch_irq(this, desc);
+}
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
new file mode 100644
index 00000000000..f638cd8077c
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -0,0 +1,1844 @@
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/mtd/partitions.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_mtd.h>
+#include "gpmi-nand.h"
+#include "bch-regs.h"
+
+/* Resource names for the GPMI NAND driver. */
+#define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME  "gpmi-nand"
+#define GPMI_NAND_BCH_REGS_ADDR_RES_NAME   "bch"
+#define GPMI_NAND_BCH_INTERRUPT_RES_NAME   "bch"
+
+/* add our owner bbt descriptor */
+static uint8_t scan_ff_pattern[] = { 0xff };
+static struct nand_bbt_descr gpmi_bbt_descr = {
+	.options	= 0,
+	.offs		= 0,
+	.len		= 1,
+	.pattern	= scan_ff_pattern
+};
+
+/*
+ * We may change the layout if we can get the ECC info from the datasheet,
+ * else we will use all the (page + OOB).
+ */
+static struct nand_ecclayout gpmi_hw_ecclayout = {
+	.eccbytes = 0,
+	.eccpos = { 0, },
+	.oobfree = { {.offset = 0, .length = 0} }
+};
+
+static const struct gpmi_devdata gpmi_devdata_imx23 = {
+	.type = IS_MX23,
+	.bch_max_ecc_strength = 20,
+	.max_chain_delay = 16,
+};
+
+static const struct gpmi_devdata gpmi_devdata_imx28 = {
+	.type = IS_MX28,
+	.bch_max_ecc_strength = 20,
+	.max_chain_delay = 16,
+};
+
+static const struct gpmi_devdata gpmi_devdata_imx6q = {
+	.type = IS_MX6Q,
+	.bch_max_ecc_strength = 40,
+	.max_chain_delay = 12,
+};
+
+static const struct gpmi_devdata gpmi_devdata_imx6sx = {
+	.type = IS_MX6SX,
+	.bch_max_ecc_strength = 62,
+	.max_chain_delay = 12,
+};
+
+static irqreturn_t bch_irq(int irq, void *cookie)
+{
+	struct gpmi_nand_data *this = cookie;
+
+	gpmi_clear_bch(this);
+	complete(&this->bch_done);
+	return IRQ_HANDLED;
+}
+
+/*
+ *  Calculate the ECC strength by hand:
+ *	E : The ECC strength.
+ *	G : the length of Galois Field.
+ *	N : The chunk count of per page.
+ *	O : the oobsize of the NAND chip.
+ *	M : the metasize of per page.
+ *
+ *	The formula is :
+ *		E * G * N
+ *	      ------------ <= (O - M)
+ *                  8
+ *
+ *      So, we get E by:
+ *                    (O - M) * 8
+ *              E <= -------------
+ *                       G * N
+ */
+static inline int get_ecc_strength(struct gpmi_nand_data *this)
+{
+	struct bch_geometry *geo = &this->bch_geometry;
+	struct mtd_info	*mtd = &this->mtd;
+	int ecc_strength;
+
+	ecc_strength = ((mtd->oobsize - geo->metadata_size) * 8)
+			/ (geo->gf_len * geo->ecc_chunk_count);
+
+	/* We need the minor even number. */
+	return round_down(ecc_strength, 2);
+}
+
+static inline bool gpmi_check_ecc(struct gpmi_nand_data *this)
+{
+	struct bch_geometry *geo = &this->bch_geometry;
+
+	/* Do the sanity check. */
+	if (GPMI_IS_MX23(this) || GPMI_IS_MX28(this)) {
+		/* The mx23/mx28 only support the GF13. */
+		if (geo->gf_len == 14)
+			return false;
+	}
+	return geo->ecc_strength <= this->devdata->bch_max_ecc_strength;
+}
+
+/*
+ * If we can get the ECC information from the nand chip, we do not
+ * need to calculate them ourselves.
+ *
+ * We may have available oob space in this case.
+ */
+static bool set_geometry_by_ecc_info(struct gpmi_nand_data *this)
+{
+	struct bch_geometry *geo = &this->bch_geometry;
+	struct mtd_info *mtd = &this->mtd;
+	struct nand_chip *chip = mtd->priv;
+	struct nand_oobfree *of = gpmi_hw_ecclayout.oobfree;
+	unsigned int block_mark_bit_offset;
+
+	if (!(chip->ecc_strength_ds > 0 && chip->ecc_step_ds > 0))
+		return false;
+
+	switch (chip->ecc_step_ds) {
+	case SZ_512:
+		geo->gf_len = 13;
+		break;
+	case SZ_1K:
+		geo->gf_len = 14;
+		break;
+	default:
+		dev_err(this->dev,
+			"unsupported nand chip. ecc bits : %d, ecc size : %d\n",
+			chip->ecc_strength_ds, chip->ecc_step_ds);
+		return false;
+	}
+	geo->ecc_chunk_size = chip->ecc_step_ds;
+	geo->ecc_strength = round_up(chip->ecc_strength_ds, 2);
+	if (!gpmi_check_ecc(this))
+		return false;
+
+	/* Keep the C >= O */
+	if (geo->ecc_chunk_size < mtd->oobsize) {
+		dev_err(this->dev,
+			"unsupported nand chip. ecc size: %d, oob size : %d\n",
+			chip->ecc_step_ds, mtd->oobsize);
+		return false;
+	}
+
+	/* The default value, see comment in the legacy_set_geometry(). */
+	geo->metadata_size = 10;
+
+	geo->ecc_chunk_count = mtd->writesize / geo->ecc_chunk_size;
+
+	/*
+	 * Now, the NAND chip with 2K page(data chunk is 512byte) shows below:
+	 *
+	 *    |                          P                            |
+	 *    |<----------------------------------------------------->|
+	 *    |                                                       |
+	 *    |                                        (Block Mark)   |
+	 *    |                      P'                      |      | |     |
+	 *    |<-------------------------------------------->|  D   | |  O' |
+	 *    |                                              |<---->| |<--->|
+	 *    V                                              V      V V     V
+	 *    +---+----------+-+----------+-+----------+-+----------+-+-----+
+	 *    | M |   data   |E|   data   |E|   data   |E|   data   |E|     |
+	 *    +---+----------+-+----------+-+----------+-+----------+-+-----+
+	 *                                                   ^              ^
+	 *                                                   |      O       |
+	 *                                                   |<------------>|
+	 *                                                   |              |
+	 *
+	 *	P : the page size for BCH module.
+	 *	E : The ECC strength.
+	 *	G : the length of Galois Field.
+	 *	N : The chunk count of per page.
+	 *	M : the metasize of per page.
+	 *	C : the ecc chunk size, aka the "data" above.
+	 *	P': the nand chip's page size.
+	 *	O : the nand chip's oob size.
+	 *	O': the free oob.
+	 *
+	 *	The formula for P is :
+	 *
+	 *	            E * G * N
+	 *	       P = ------------ + P' + M
+	 *                      8
+	 *
+	 * The position of block mark moves forward in the ECC-based view
+	 * of page, and the delta is:
+	 *
+	 *                   E * G * (N - 1)
+	 *             D = (---------------- + M)
+	 *                          8
+	 *
+	 * Please see the comment in legacy_set_geometry().
+	 * With the condition C >= O , we still can get same result.
+	 * So the bit position of the physical block mark within the ECC-based
+	 * view of the page is :
+	 *             (P' - D) * 8
+	 */
+	geo->page_size = mtd->writesize + geo->metadata_size +
+		(geo->gf_len * geo->ecc_strength * geo->ecc_chunk_count) / 8;
+
+	/* The available oob size we have. */
+	if (geo->page_size < mtd->writesize + mtd->oobsize) {
+		of->offset = geo->page_size - mtd->writesize;
+		of->length = mtd->oobsize - of->offset;
+	}
+
+	geo->payload_size = mtd->writesize;
+
+	geo->auxiliary_status_offset = ALIGN(geo->metadata_size, 4);
+	geo->auxiliary_size = ALIGN(geo->metadata_size, 4)
+				+ ALIGN(geo->ecc_chunk_count, 4);
+
+	if (!this->swap_block_mark)
+		return true;
+
+	/* For bit swap. */
+	block_mark_bit_offset = mtd->writesize * 8 -
+		(geo->ecc_strength * geo->gf_len * (geo->ecc_chunk_count - 1)
+				+ geo->metadata_size * 8);
+
+	geo->block_mark_byte_offset = block_mark_bit_offset / 8;
+	geo->block_mark_bit_offset  = block_mark_bit_offset % 8;
+	return true;
+}
+
+static int legacy_set_geometry(struct gpmi_nand_data *this)
+{
+	struct bch_geometry *geo = &this->bch_geometry;
+	struct mtd_info *mtd = &this->mtd;
+	unsigned int metadata_size;
+	unsigned int status_size;
+	unsigned int block_mark_bit_offset;
+
+	/*
+	 * The size of the metadata can be changed, though we set it to 10
+	 * bytes now. But it can't be too large, because we have to save
+	 * enough space for BCH.
+	 */
+	geo->metadata_size = 10;
+
+	/* The default for the length of Galois Field. */
+	geo->gf_len = 13;
+
+	/* The default for chunk size. */
+	geo->ecc_chunk_size = 512;
+	while (geo->ecc_chunk_size < mtd->oobsize) {
+		geo->ecc_chunk_size *= 2; /* keep C >= O */
+		geo->gf_len = 14;
+	}
+
+	geo->ecc_chunk_count = mtd->writesize / geo->ecc_chunk_size;
+
+	/* We use the same ECC strength for all chunks. */
+	geo->ecc_strength = get_ecc_strength(this);
+	if (!gpmi_check_ecc(this)) {
+		dev_err(this->dev,
+			"We can not support this nand chip."
+			" Its required ecc strength(%d) is beyond our"
+			" capability(%d).\n", geo->ecc_strength,
+			this->devdata->bch_max_ecc_strength);
+		return -EINVAL;
+	}
+
+	geo->page_size = mtd->writesize + mtd->oobsize;
+	geo->payload_size = mtd->writesize;
+
+	/*
+	 * The auxiliary buffer contains the metadata and the ECC status. The
+	 * metadata is padded to the nearest 32-bit boundary. The ECC status
+	 * contains one byte for every ECC chunk, and is also padded to the
+	 * nearest 32-bit boundary.
+	 */
+	metadata_size = ALIGN(geo->metadata_size, 4);
+	status_size   = ALIGN(geo->ecc_chunk_count, 4);
+
+	geo->auxiliary_size = metadata_size + status_size;
+	geo->auxiliary_status_offset = metadata_size;
+
+	if (!this->swap_block_mark)
+		return 0;
+
+	/*
+	 * We need to compute the byte and bit offsets of
+	 * the physical block mark within the ECC-based view of the page.
+	 *
+	 * NAND chip with 2K page shows below:
+	 *                                             (Block Mark)
+	 *                                                   |      |
+	 *                                                   |  D   |
+	 *                                                   |<---->|
+	 *                                                   V      V
+	 *    +---+----------+-+----------+-+----------+-+----------+-+
+	 *    | M |   data   |E|   data   |E|   data   |E|   data   |E|
+	 *    +---+----------+-+----------+-+----------+-+----------+-+
+	 *
+	 * The position of block mark moves forward in the ECC-based view
+	 * of page, and the delta is:
+	 *
+	 *                   E * G * (N - 1)
+	 *             D = (---------------- + M)
+	 *                          8
+	 *
+	 * With the formula to compute the ECC strength, and the condition
+	 *       : C >= O         (C is the ecc chunk size)
+	 *
+	 * It's easy to deduce to the following result:
+	 *
+	 *         E * G       (O - M)      C - M         C - M
+	 *      ----------- <= ------- <=  --------  <  ---------
+	 *           8            N           N          (N - 1)
+	 *
+	 *  So, we get:
+	 *
+	 *                   E * G * (N - 1)
+	 *             D = (---------------- + M) < C
+	 *                          8
+	 *
+	 *  The above inequality means the position of block mark
+	 *  within the ECC-based view of the page is still in the data chunk,
+	 *  and it's NOT in the ECC bits of the chunk.
+	 *
+	 *  Use the following to compute the bit position of the
+	 *  physical block mark within the ECC-based view of the page:
+	 *          (page_size - D) * 8
+	 *
+	 *  --Huang Shijie
+	 */
+	block_mark_bit_offset = mtd->writesize * 8 -
+		(geo->ecc_strength * geo->gf_len * (geo->ecc_chunk_count - 1)
+				+ geo->metadata_size * 8);
+
+	geo->block_mark_byte_offset = block_mark_bit_offset / 8;
+	geo->block_mark_bit_offset  = block_mark_bit_offset % 8;
+	return 0;
+}
+
+int common_nfc_set_geometry(struct gpmi_nand_data *this)
+{
+	if (of_property_read_bool(this->dev->of_node, "fsl,use-minimum-ecc")
+		&& set_geometry_by_ecc_info(this))
+		return 0;
+	return legacy_set_geometry(this);
+}
+
+struct dma_chan *get_dma_chan(struct gpmi_nand_data *this)
+{
+	/* We use the DMA channel 0 to access all the nand chips. */
+	return this->dma_chans[0];
+}
+
+/* Can we use the upper's buffer directly for DMA? */
+void prepare_data_dma(struct gpmi_nand_data *this, enum dma_data_direction dr)
+{
+	struct scatterlist *sgl = &this->data_sgl;
+	int ret;
+
+	/* first try to map the upper buffer directly */
+	if (virt_addr_valid(this->upper_buf) &&
+		!object_is_on_stack(this->upper_buf)) {
+		sg_init_one(sgl, this->upper_buf, this->upper_len);
+		ret = dma_map_sg(this->dev, sgl, 1, dr);
+		if (ret == 0)
+			goto map_fail;
+
+		this->direct_dma_map_ok = true;
+		return;
+	}
+
+map_fail:
+	/* We have to use our own DMA buffer. */
+	sg_init_one(sgl, this->data_buffer_dma, this->upper_len);
+
+	if (dr == DMA_TO_DEVICE)
+		memcpy(this->data_buffer_dma, this->upper_buf, this->upper_len);
+
+	dma_map_sg(this->dev, sgl, 1, dr);
+
+	this->direct_dma_map_ok = false;
+}
+
+/* This will be called after the DMA operation is finished. */
+static void dma_irq_callback(void *param)
+{
+	struct gpmi_nand_data *this = param;
+	struct completion *dma_c = &this->dma_done;
+
+	switch (this->dma_type) {
+	case DMA_FOR_COMMAND:
+		dma_unmap_sg(this->dev, &this->cmd_sgl, 1, DMA_TO_DEVICE);
+		break;
+
+	case DMA_FOR_READ_DATA:
+		dma_unmap_sg(this->dev, &this->data_sgl, 1, DMA_FROM_DEVICE);
+		if (this->direct_dma_map_ok == false)
+			memcpy(this->upper_buf, this->data_buffer_dma,
+				this->upper_len);
+		break;
+
+	case DMA_FOR_WRITE_DATA:
+		dma_unmap_sg(this->dev, &this->data_sgl, 1, DMA_TO_DEVICE);
+		break;
+
+	case DMA_FOR_READ_ECC_PAGE:
+	case DMA_FOR_WRITE_ECC_PAGE:
+		/* We have to wait the BCH interrupt to finish. */
+		break;
+
+	default:
+		dev_err(this->dev, "in wrong DMA operation.\n");
+	}
+
+	complete(dma_c);
+}
+
+int start_dma_without_bch_irq(struct gpmi_nand_data *this,
+				struct dma_async_tx_descriptor *desc)
+{
+	struct completion *dma_c = &this->dma_done;
+	int err;
+
+	init_completion(dma_c);
+
+	desc->callback		= dma_irq_callback;
+	desc->callback_param	= this;
+	dmaengine_submit(desc);
+	dma_async_issue_pending(get_dma_chan(this));
+
+	/* Wait for the interrupt from the DMA block. */
+	err = wait_for_completion_timeout(dma_c, msecs_to_jiffies(1000));
+	if (!err) {
+		dev_err(this->dev, "DMA timeout, last DMA :%d\n",
+			this->last_dma_type);
+		gpmi_dump_info(this);
+		return -ETIMEDOUT;
+	}
+	return 0;
+}
+
+/*
+ * This function is used in BCH reading or BCH writing pages.
+ * It will wait for the BCH interrupt as long as ONE second.
+ * Actually, we must wait for two interrupts :
+ *	[1] firstly the DMA interrupt and
+ *	[2] secondly the BCH interrupt.
+ */
+int start_dma_with_bch_irq(struct gpmi_nand_data *this,
+			struct dma_async_tx_descriptor *desc)
+{
+	struct completion *bch_c = &this->bch_done;
+	int err;
+
+	/* Prepare to receive an interrupt from the BCH block. */
+	init_completion(bch_c);
+
+	/* start the DMA */
+	start_dma_without_bch_irq(this, desc);
+
+	/* Wait for the interrupt from the BCH block. */
+	err = wait_for_completion_timeout(bch_c, msecs_to_jiffies(1000));
+	if (!err) {
+		dev_err(this->dev, "BCH timeout, last DMA :%d\n",
+			this->last_dma_type);
+		gpmi_dump_info(this);
+		return -ETIMEDOUT;
+	}
+	return 0;
+}
+
+static int acquire_register_block(struct gpmi_nand_data *this,
+				  const char *res_name)
+{
+	struct platform_device *pdev = this->pdev;
+	struct resources *res = &this->resources;
+	struct resource *r;
+	void __iomem *p;
+
+	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res_name);
+	p = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(p))
+		return PTR_ERR(p);
+
+	if (!strcmp(res_name, GPMI_NAND_GPMI_REGS_ADDR_RES_NAME))
+		res->gpmi_regs = p;
+	else if (!strcmp(res_name, GPMI_NAND_BCH_REGS_ADDR_RES_NAME))
+		res->bch_regs = p;
+	else
+		dev_err(this->dev, "unknown resource name : %s\n", res_name);
+
+	return 0;
+}
+
+static int acquire_bch_irq(struct gpmi_nand_data *this, irq_handler_t irq_h)
+{
+	struct platform_device *pdev = this->pdev;
+	const char *res_name = GPMI_NAND_BCH_INTERRUPT_RES_NAME;
+	struct resource *r;
+	int err;
+
+	r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, res_name);
+	if (!r) {
+		dev_err(this->dev, "Can't get resource for %s\n", res_name);
+		return -ENODEV;
+	}
+
+	err = devm_request_irq(this->dev, r->start, irq_h, 0, res_name, this);
+	if (err)
+		dev_err(this->dev, "error requesting BCH IRQ\n");
+
+	return err;
+}
+
+static void release_dma_channels(struct gpmi_nand_data *this)
+{
+	unsigned int i;
+	for (i = 0; i < DMA_CHANS; i++)
+		if (this->dma_chans[i]) {
+			dma_release_channel(this->dma_chans[i]);
+			this->dma_chans[i] = NULL;
+		}
+}
+
+static int acquire_dma_channels(struct gpmi_nand_data *this)
+{
+	struct platform_device *pdev = this->pdev;
+	struct dma_chan *dma_chan;
+
+	/* request dma channel */
+	dma_chan = dma_request_slave_channel(&pdev->dev, "rx-tx");
+	if (!dma_chan) {
+		dev_err(this->dev, "Failed to request DMA channel.\n");
+		goto acquire_err;
+	}
+
+	this->dma_chans[0] = dma_chan;
+	return 0;
+
+acquire_err:
+	release_dma_channels(this);
+	return -EINVAL;
+}
+
+static char *extra_clks_for_mx6q[GPMI_CLK_MAX] = {
+	"gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch",
+};
+
+static int gpmi_get_clks(struct gpmi_nand_data *this)
+{
+	struct resources *r = &this->resources;
+	char **extra_clks = NULL;
+	struct clk *clk;
+	int err, i;
+
+	/* The main clock is stored in the first. */
+	r->clock[0] = devm_clk_get(this->dev, "gpmi_io");
+	if (IS_ERR(r->clock[0])) {
+		err = PTR_ERR(r->clock[0]);
+		goto err_clock;
+	}
+
+	/* Get extra clocks */
+	if (GPMI_IS_MX6(this))
+		extra_clks = extra_clks_for_mx6q;
+	if (!extra_clks)
+		return 0;
+
+	for (i = 1; i < GPMI_CLK_MAX; i++) {
+		if (extra_clks[i - 1] == NULL)
+			break;
+
+		clk = devm_clk_get(this->dev, extra_clks[i - 1]);
+		if (IS_ERR(clk)) {
+			err = PTR_ERR(clk);
+			goto err_clock;
+		}
+
+		r->clock[i] = clk;
+	}
+
+	if (GPMI_IS_MX6(this))
+		/*
+		 * Set the default value for the gpmi clock.
+		 *
+		 * If you want to use the ONFI nand which is in the
+		 * Synchronous Mode, you should change the clock as you need.
+		 */
+		clk_set_rate(r->clock[0], 22000000);
+
+	return 0;
+
+err_clock:
+	dev_dbg(this->dev, "failed in finding the clocks.\n");
+	return err;
+}
+
+static int acquire_resources(struct gpmi_nand_data *this)
+{
+	int ret;
+
+	ret = acquire_register_block(this, GPMI_NAND_GPMI_REGS_ADDR_RES_NAME);
+	if (ret)
+		goto exit_regs;
+
+	ret = acquire_register_block(this, GPMI_NAND_BCH_REGS_ADDR_RES_NAME);
+	if (ret)
+		goto exit_regs;
+
+	ret = acquire_bch_irq(this, bch_irq);
+	if (ret)
+		goto exit_regs;
+
+	ret = acquire_dma_channels(this);
+	if (ret)
+		goto exit_regs;
+
+	ret = gpmi_get_clks(this);
+	if (ret)
+		goto exit_clock;
+	return 0;
+
+exit_clock:
+	release_dma_channels(this);
+exit_regs:
+	return ret;
+}
+
+static void release_resources(struct gpmi_nand_data *this)
+{
+	release_dma_channels(this);
+}
+
+static int init_hardware(struct gpmi_nand_data *this)
+{
+	int ret;
+
+	/*
+	 * This structure contains the "safe" GPMI timing that should succeed
+	 * with any NAND Flash device
+	 * (although, with less-than-optimal performance).
+	 */
+	struct nand_timing  safe_timing = {
+		.data_setup_in_ns        = 80,
+		.data_hold_in_ns         = 60,
+		.address_setup_in_ns     = 25,
+		.gpmi_sample_delay_in_ns =  6,
+		.tREA_in_ns              = -1,
+		.tRLOH_in_ns             = -1,
+		.tRHOH_in_ns             = -1,
+	};
+
+	/* Initialize the hardwares. */
+	ret = gpmi_init(this);
+	if (ret)
+		return ret;
+
+	this->timing = safe_timing;
+	return 0;
+}
+
+static int read_page_prepare(struct gpmi_nand_data *this,
+			void *destination, unsigned length,
+			void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+			void **use_virt, dma_addr_t *use_phys)
+{
+	struct device *dev = this->dev;
+
+	if (virt_addr_valid(destination)) {
+		dma_addr_t dest_phys;
+
+		dest_phys = dma_map_single(dev, destination,
+						length, DMA_FROM_DEVICE);
+		if (dma_mapping_error(dev, dest_phys)) {
+			if (alt_size < length) {
+				dev_err(dev, "Alternate buffer is too small\n");
+				return -ENOMEM;
+			}
+			goto map_failed;
+		}
+		*use_virt = destination;
+		*use_phys = dest_phys;
+		this->direct_dma_map_ok = true;
+		return 0;
+	}
+
+map_failed:
+	*use_virt = alt_virt;
+	*use_phys = alt_phys;
+	this->direct_dma_map_ok = false;
+	return 0;
+}
+
+static inline void read_page_end(struct gpmi_nand_data *this,
+			void *destination, unsigned length,
+			void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+			void *used_virt, dma_addr_t used_phys)
+{
+	if (this->direct_dma_map_ok)
+		dma_unmap_single(this->dev, used_phys, length, DMA_FROM_DEVICE);
+}
+
+static inline void read_page_swap_end(struct gpmi_nand_data *this,
+			void *destination, unsigned length,
+			void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+			void *used_virt, dma_addr_t used_phys)
+{
+	if (!this->direct_dma_map_ok)
+		memcpy(destination, alt_virt, length);
+}
+
+static int send_page_prepare(struct gpmi_nand_data *this,
+			const void *source, unsigned length,
+			void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+			const void **use_virt, dma_addr_t *use_phys)
+{
+	struct device *dev = this->dev;
+
+	if (virt_addr_valid(source)) {
+		dma_addr_t source_phys;
+
+		source_phys = dma_map_single(dev, (void *)source, length,
+						DMA_TO_DEVICE);
+		if (dma_mapping_error(dev, source_phys)) {
+			if (alt_size < length) {
+				dev_err(dev, "Alternate buffer is too small\n");
+				return -ENOMEM;
+			}
+			goto map_failed;
+		}
+		*use_virt = source;
+		*use_phys = source_phys;
+		return 0;
+	}
+map_failed:
+	/*
+	 * Copy the content of the source buffer into the alternate
+	 * buffer and set up the return values accordingly.
+	 */
+	memcpy(alt_virt, source, length);
+
+	*use_virt = alt_virt;
+	*use_phys = alt_phys;
+	return 0;
+}
+
+static void send_page_end(struct gpmi_nand_data *this,
+			const void *source, unsigned length,
+			void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+			const void *used_virt, dma_addr_t used_phys)
+{
+	struct device *dev = this->dev;
+	if (used_virt == source)
+		dma_unmap_single(dev, used_phys, length, DMA_TO_DEVICE);
+}
+
+static void gpmi_free_dma_buffer(struct gpmi_nand_data *this)
+{
+	struct device *dev = this->dev;
+
+	if (this->page_buffer_virt && virt_addr_valid(this->page_buffer_virt))
+		dma_free_coherent(dev, this->page_buffer_size,
+					this->page_buffer_virt,
+					this->page_buffer_phys);
+	kfree(this->cmd_buffer);
+	kfree(this->data_buffer_dma);
+
+	this->cmd_buffer	= NULL;
+	this->data_buffer_dma	= NULL;
+	this->page_buffer_virt	= NULL;
+	this->page_buffer_size	=  0;
+}
+
+/* Allocate the DMA buffers */
+static int gpmi_alloc_dma_buffer(struct gpmi_nand_data *this)
+{
+	struct bch_geometry *geo = &this->bch_geometry;
+	struct device *dev = this->dev;
+	struct mtd_info *mtd = &this->mtd;
+
+	/* [1] Allocate a command buffer. PAGE_SIZE is enough. */
+	this->cmd_buffer = kzalloc(PAGE_SIZE, GFP_DMA | GFP_KERNEL);
+	if (this->cmd_buffer == NULL)
+		goto error_alloc;
+
+	/*
+	 * [2] Allocate a read/write data buffer.
+	 *     The gpmi_alloc_dma_buffer can be called twice.
+	 *     We allocate a PAGE_SIZE length buffer if gpmi_alloc_dma_buffer
+	 *     is called before the nand_scan_ident; and we allocate a buffer
+	 *     of the real NAND page size when the gpmi_alloc_dma_buffer is
+	 *     called after the nand_scan_ident.
+	 */
+	this->data_buffer_dma = kzalloc(mtd->writesize ?: PAGE_SIZE,
+					GFP_DMA | GFP_KERNEL);
+	if (this->data_buffer_dma == NULL)
+		goto error_alloc;
+
+	/*
+	 * [3] Allocate the page buffer.
+	 *
+	 * Both the payload buffer and the auxiliary buffer must appear on
+	 * 32-bit boundaries. We presume the size of the payload buffer is a
+	 * power of two and is much larger than four, which guarantees the
+	 * auxiliary buffer will appear on a 32-bit boundary.
+	 */
+	this->page_buffer_size = geo->payload_size + geo->auxiliary_size;
+	this->page_buffer_virt = dma_alloc_coherent(dev, this->page_buffer_size,
+					&this->page_buffer_phys, GFP_DMA);
+	if (!this->page_buffer_virt)
+		goto error_alloc;
+
+
+	/* Slice up the page buffer. */
+	this->payload_virt = this->page_buffer_virt;
+	this->payload_phys = this->page_buffer_phys;
+	this->auxiliary_virt = this->payload_virt + geo->payload_size;
+	this->auxiliary_phys = this->payload_phys + geo->payload_size;
+	return 0;
+
+error_alloc:
+	gpmi_free_dma_buffer(this);
+	return -ENOMEM;
+}
+
+static void gpmi_cmd_ctrl(struct mtd_info *mtd, int data, unsigned int ctrl)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct gpmi_nand_data *this = chip->priv;
+	int ret;
+
+	/*
+	 * Every operation begins with a command byte and a series of zero or
+	 * more address bytes. These are distinguished by either the Address
+	 * Latch Enable (ALE) or Command Latch Enable (CLE) signals being
+	 * asserted. When MTD is ready to execute the command, it will deassert
+	 * both latch enables.
+	 *
+	 * Rather than run a separate DMA operation for every single byte, we
+	 * queue them up and run a single DMA operation for the entire series
+	 * of command and data bytes. NAND_CMD_NONE means the END of the queue.
+	 */
+	if ((ctrl & (NAND_ALE | NAND_CLE))) {
+		if (data != NAND_CMD_NONE)
+			this->cmd_buffer[this->command_length++] = data;
+		return;
+	}
+
+	if (!this->command_length)
+		return;
+
+	ret = gpmi_send_command(this);
+	if (ret)
+		dev_err(this->dev, "Chip: %u, Error %d\n",
+			this->current_chip, ret);
+
+	this->command_length = 0;
+}
+
+static int gpmi_dev_ready(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct gpmi_nand_data *this = chip->priv;
+
+	return gpmi_is_ready(this, this->current_chip);
+}
+
+static void gpmi_select_chip(struct mtd_info *mtd, int chipnr)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct gpmi_nand_data *this = chip->priv;
+
+	if ((this->current_chip < 0) && (chipnr >= 0))
+		gpmi_begin(this);
+	else if ((this->current_chip >= 0) && (chipnr < 0))
+		gpmi_end(this);
+
+	this->current_chip = chipnr;
+}
+
+static void gpmi_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct gpmi_nand_data *this = chip->priv;
+
+	dev_dbg(this->dev, "len is %d\n", len);
+	this->upper_buf	= buf;
+	this->upper_len	= len;
+
+	gpmi_read_data(this);
+}
+
+static void gpmi_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct gpmi_nand_data *this = chip->priv;
+
+	dev_dbg(this->dev, "len is %d\n", len);
+	this->upper_buf	= (uint8_t *)buf;
+	this->upper_len	= len;
+
+	gpmi_send_data(this);
+}
+
+static uint8_t gpmi_read_byte(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct gpmi_nand_data *this = chip->priv;
+	uint8_t *buf = this->data_buffer_dma;
+
+	gpmi_read_buf(mtd, buf, 1);
+	return buf[0];
+}
+
+/*
+ * Handles block mark swapping.
+ * It can be called in swapping the block mark, or swapping it back,
+ * because the the operations are the same.
+ */
+static void block_mark_swapping(struct gpmi_nand_data *this,
+				void *payload, void *auxiliary)
+{
+	struct bch_geometry *nfc_geo = &this->bch_geometry;
+	unsigned char *p;
+	unsigned char *a;
+	unsigned int  bit;
+	unsigned char mask;
+	unsigned char from_data;
+	unsigned char from_oob;
+
+	if (!this->swap_block_mark)
+		return;
+
+	/*
+	 * If control arrives here, we're swapping. Make some convenience
+	 * variables.
+	 */
+	bit = nfc_geo->block_mark_bit_offset;
+	p   = payload + nfc_geo->block_mark_byte_offset;
+	a   = auxiliary;
+
+	/*
+	 * Get the byte from the data area that overlays the block mark. Since
+	 * the ECC engine applies its own view to the bits in the page, the
+	 * physical block mark won't (in general) appear on a byte boundary in
+	 * the data.
+	 */
+	from_data = (p[0] >> bit) | (p[1] << (8 - bit));
+
+	/* Get the byte from the OOB. */
+	from_oob = a[0];
+
+	/* Swap them. */
+	a[0] = from_data;
+
+	mask = (0x1 << bit) - 1;
+	p[0] = (p[0] & mask) | (from_oob << bit);
+
+	mask = ~0 << bit;
+	p[1] = (p[1] & mask) | (from_oob >> (8 - bit));
+}
+
+static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+				uint8_t *buf, int oob_required, int page)
+{
+	struct gpmi_nand_data *this = chip->priv;
+	struct bch_geometry *nfc_geo = &this->bch_geometry;
+	void          *payload_virt;
+	dma_addr_t    payload_phys;
+	void          *auxiliary_virt;
+	dma_addr_t    auxiliary_phys;
+	unsigned int  i;
+	unsigned char *status;
+	unsigned int  max_bitflips = 0;
+	int           ret;
+
+	dev_dbg(this->dev, "page number is : %d\n", page);
+	ret = read_page_prepare(this, buf, nfc_geo->payload_size,
+					this->payload_virt, this->payload_phys,
+					nfc_geo->payload_size,
+					&payload_virt, &payload_phys);
+	if (ret) {
+		dev_err(this->dev, "Inadequate DMA buffer\n");
+		ret = -ENOMEM;
+		return ret;
+	}
+	auxiliary_virt = this->auxiliary_virt;
+	auxiliary_phys = this->auxiliary_phys;
+
+	/* go! */
+	ret = gpmi_read_page(this, payload_phys, auxiliary_phys);
+	read_page_end(this, buf, nfc_geo->payload_size,
+			this->payload_virt, this->payload_phys,
+			nfc_geo->payload_size,
+			payload_virt, payload_phys);
+	if (ret) {
+		dev_err(this->dev, "Error in ECC-based read: %d\n", ret);
+		return ret;
+	}
+
+	/* handle the block mark swapping */
+	block_mark_swapping(this, payload_virt, auxiliary_virt);
+
+	/* Loop over status bytes, accumulating ECC status. */
+	status = auxiliary_virt + nfc_geo->auxiliary_status_offset;
+
+	for (i = 0; i < nfc_geo->ecc_chunk_count; i++, status++) {
+		if ((*status == STATUS_GOOD) || (*status == STATUS_ERASED))
+			continue;
+
+		if (*status == STATUS_UNCORRECTABLE) {
+			mtd->ecc_stats.failed++;
+			continue;
+		}
+		mtd->ecc_stats.corrected += *status;
+		max_bitflips = max_t(unsigned int, max_bitflips, *status);
+	}
+
+	if (oob_required) {
+		/*
+		 * It's time to deliver the OOB bytes. See gpmi_ecc_read_oob()
+		 * for details about our policy for delivering the OOB.
+		 *
+		 * We fill the caller's buffer with set bits, and then copy the
+		 * block mark to th caller's buffer. Note that, if block mark
+		 * swapping was necessary, it has already been done, so we can
+		 * rely on the first byte of the auxiliary buffer to contain
+		 * the block mark.
+		 */
+		memset(chip->oob_poi, ~0, mtd->oobsize);
+		chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0];
+	}
+
+	read_page_swap_end(this, buf, nfc_geo->payload_size,
+			this->payload_virt, this->payload_phys,
+			nfc_geo->payload_size,
+			payload_virt, payload_phys);
+
+	return max_bitflips;
+}
+
+/* Fake a virtual small page for the subpage read */
+static int gpmi_ecc_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
+			uint32_t offs, uint32_t len, uint8_t *buf, int page)
+{
+	struct gpmi_nand_data *this = chip->priv;
+	void __iomem *bch_regs = this->resources.bch_regs;
+	struct bch_geometry old_geo = this->bch_geometry;
+	struct bch_geometry *geo = &this->bch_geometry;
+	int size = chip->ecc.size; /* ECC chunk size */
+	int meta, n, page_size;
+	u32 r1_old, r2_old, r1_new, r2_new;
+	unsigned int max_bitflips;
+	int first, last, marker_pos;
+	int ecc_parity_size;
+	int col = 0;
+
+	/* The size of ECC parity */
+	ecc_parity_size = geo->gf_len * geo->ecc_strength / 8;
+
+	/* Align it with the chunk size */
+	first = offs / size;
+	last = (offs + len - 1) / size;
+
+	/*
+	 * Find the chunk which contains the Block Marker. If this chunk is
+	 * in the range of [first, last], we have to read out the whole page.
+	 * Why? since we had swapped the data at the position of Block Marker
+	 * to the metadata which is bound with the chunk 0.
+	 */
+	marker_pos = geo->block_mark_byte_offset / size;
+	if (last >= marker_pos && first <= marker_pos) {
+		dev_dbg(this->dev, "page:%d, first:%d, last:%d, marker at:%d\n",
+				page, first, last, marker_pos);
+		return gpmi_ecc_read_page(mtd, chip, buf, 0, page);
+	}
+
+	meta = geo->metadata_size;
+	if (first) {
+		col = meta + (size + ecc_parity_size) * first;
+		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, col, -1);
+
+		meta = 0;
+		buf = buf + first * size;
+	}
+
+	/* Save the old environment */
+	r1_old = r1_new = readl(bch_regs + HW_BCH_FLASH0LAYOUT0);
+	r2_old = r2_new = readl(bch_regs + HW_BCH_FLASH0LAYOUT1);
+
+	/* change the BCH registers and bch_geometry{} */
+	n = last - first + 1;
+	page_size = meta + (size + ecc_parity_size) * n;
+
+	r1_new &= ~(BM_BCH_FLASH0LAYOUT0_NBLOCKS |
+			BM_BCH_FLASH0LAYOUT0_META_SIZE);
+	r1_new |= BF_BCH_FLASH0LAYOUT0_NBLOCKS(n - 1)
+			| BF_BCH_FLASH0LAYOUT0_META_SIZE(meta);
+	writel(r1_new, bch_regs + HW_BCH_FLASH0LAYOUT0);
+
+	r2_new &= ~BM_BCH_FLASH0LAYOUT1_PAGE_SIZE;
+	r2_new |= BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(page_size);
+	writel(r2_new, bch_regs + HW_BCH_FLASH0LAYOUT1);
+
+	geo->ecc_chunk_count = n;
+	geo->payload_size = n * size;
+	geo->page_size = page_size;
+	geo->auxiliary_status_offset = ALIGN(meta, 4);
+
+	dev_dbg(this->dev, "page:%d(%d:%d)%d, chunk:(%d:%d), BCH PG size:%d\n",
+		page, offs, len, col, first, n, page_size);
+
+	/* Read the subpage now */
+	this->swap_block_mark = false;
+	max_bitflips = gpmi_ecc_read_page(mtd, chip, buf, 0, page);
+
+	/* Restore */
+	writel(r1_old, bch_regs + HW_BCH_FLASH0LAYOUT0);
+	writel(r2_old, bch_regs + HW_BCH_FLASH0LAYOUT1);
+	this->bch_geometry = old_geo;
+	this->swap_block_mark = true;
+
+	return max_bitflips;
+}
+
+static int gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+				const uint8_t *buf, int oob_required)
+{
+	struct gpmi_nand_data *this = chip->priv;
+	struct bch_geometry *nfc_geo = &this->bch_geometry;
+	const void *payload_virt;
+	dma_addr_t payload_phys;
+	const void *auxiliary_virt;
+	dma_addr_t auxiliary_phys;
+	int        ret;
+
+	dev_dbg(this->dev, "ecc write page.\n");
+	if (this->swap_block_mark) {
+		/*
+		 * If control arrives here, we're doing block mark swapping.
+		 * Since we can't modify the caller's buffers, we must copy them
+		 * into our own.
+		 */
+		memcpy(this->payload_virt, buf, mtd->writesize);
+		payload_virt = this->payload_virt;
+		payload_phys = this->payload_phys;
+
+		memcpy(this->auxiliary_virt, chip->oob_poi,
+				nfc_geo->auxiliary_size);
+		auxiliary_virt = this->auxiliary_virt;
+		auxiliary_phys = this->auxiliary_phys;
+
+		/* Handle block mark swapping. */
+		block_mark_swapping(this,
+				(void *) payload_virt, (void *) auxiliary_virt);
+	} else {
+		/*
+		 * If control arrives here, we're not doing block mark swapping,
+		 * so we can to try and use the caller's buffers.
+		 */
+		ret = send_page_prepare(this,
+				buf, mtd->writesize,
+				this->payload_virt, this->payload_phys,
+				nfc_geo->payload_size,
+				&payload_virt, &payload_phys);
+		if (ret) {
+			dev_err(this->dev, "Inadequate payload DMA buffer\n");
+			return 0;
+		}
+
+		ret = send_page_prepare(this,
+				chip->oob_poi, mtd->oobsize,
+				this->auxiliary_virt, this->auxiliary_phys,
+				nfc_geo->auxiliary_size,
+				&auxiliary_virt, &auxiliary_phys);
+		if (ret) {
+			dev_err(this->dev, "Inadequate auxiliary DMA buffer\n");
+			goto exit_auxiliary;
+		}
+	}
+
+	/* Ask the NFC. */
+	ret = gpmi_send_page(this, payload_phys, auxiliary_phys);
+	if (ret)
+		dev_err(this->dev, "Error in ECC-based write: %d\n", ret);
+
+	if (!this->swap_block_mark) {
+		send_page_end(this, chip->oob_poi, mtd->oobsize,
+				this->auxiliary_virt, this->auxiliary_phys,
+				nfc_geo->auxiliary_size,
+				auxiliary_virt, auxiliary_phys);
+exit_auxiliary:
+		send_page_end(this, buf, mtd->writesize,
+				this->payload_virt, this->payload_phys,
+				nfc_geo->payload_size,
+				payload_virt, payload_phys);
+	}
+
+	return 0;
+}
+
+/*
+ * There are several places in this driver where we have to handle the OOB and
+ * block marks. This is the function where things are the most complicated, so
+ * this is where we try to explain it all. All the other places refer back to
+ * here.
+ *
+ * These are the rules, in order of decreasing importance:
+ *
+ * 1) Nothing the caller does can be allowed to imperil the block mark.
+ *
+ * 2) In read operations, the first byte of the OOB we return must reflect the
+ *    true state of the block mark, no matter where that block mark appears in
+ *    the physical page.
+ *
+ * 3) ECC-based read operations return an OOB full of set bits (since we never
+ *    allow ECC-based writes to the OOB, it doesn't matter what ECC-based reads
+ *    return).
+ *
+ * 4) "Raw" read operations return a direct view of the physical bytes in the
+ *    page, using the conventional definition of which bytes are data and which
+ *    are OOB. This gives the caller a way to see the actual, physical bytes
+ *    in the page, without the distortions applied by our ECC engine.
+ *
+ *
+ * What we do for this specific read operation depends on two questions:
+ *
+ * 1) Are we doing a "raw" read, or an ECC-based read?
+ *
+ * 2) Are we using block mark swapping or transcription?
+ *
+ * There are four cases, illustrated by the following Karnaugh map:
+ *
+ *                    |           Raw           |         ECC-based       |
+ *       -------------+-------------------------+-------------------------+
+ *                    | Read the conventional   |                         |
+ *                    | OOB at the end of the   |                         |
+ *       Swapping     | page and return it. It  |                         |
+ *                    | contains exactly what   |                         |
+ *                    | we want.                | Read the block mark and |
+ *       -------------+-------------------------+ return it in a buffer   |
+ *                    | Read the conventional   | full of set bits.       |
+ *                    | OOB at the end of the   |                         |
+ *                    | page and also the block |                         |
+ *       Transcribing | mark in the metadata.   |                         |
+ *                    | Copy the block mark     |                         |
+ *                    | into the first byte of  |                         |
+ *                    | the OOB.                |                         |
+ *       -------------+-------------------------+-------------------------+
+ *
+ * Note that we break rule #4 in the Transcribing/Raw case because we're not
+ * giving an accurate view of the actual, physical bytes in the page (we're
+ * overwriting the block mark). That's OK because it's more important to follow
+ * rule #2.
+ *
+ * It turns out that knowing whether we want an "ECC-based" or "raw" read is not
+ * easy. When reading a page, for example, the NAND Flash MTD code calls our
+ * ecc.read_page or ecc.read_page_raw function. Thus, the fact that MTD wants an
+ * ECC-based or raw view of the page is implicit in which function it calls
+ * (there is a similar pair of ECC-based/raw functions for writing).
+ *
+ * FIXME: The following paragraph is incorrect, now that there exist
+ * ecc.read_oob_raw and ecc.write_oob_raw functions.
+ *
+ * Since MTD assumes the OOB is not covered by ECC, there is no pair of
+ * ECC-based/raw functions for reading or or writing the OOB. The fact that the
+ * caller wants an ECC-based or raw view of the page is not propagated down to
+ * this driver.
+ */
+static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
+				int page)
+{
+	struct gpmi_nand_data *this = chip->priv;
+
+	dev_dbg(this->dev, "page number is %d\n", page);
+	/* clear the OOB buffer */
+	memset(chip->oob_poi, ~0, mtd->oobsize);
+
+	/* Read out the conventional OOB. */
+	chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
+	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	/*
+	 * Now, we want to make sure the block mark is correct. In the
+	 * Swapping/Raw case, we already have it. Otherwise, we need to
+	 * explicitly read it.
+	 */
+	if (!this->swap_block_mark) {
+		/* Read the block mark into the first byte of the OOB buffer. */
+		chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+		chip->oob_poi[0] = chip->read_byte(mtd);
+	}
+
+	return 0;
+}
+
+static int
+gpmi_ecc_write_oob(struct mtd_info *mtd, struct nand_chip *chip, int page)
+{
+	struct nand_oobfree *of = mtd->ecclayout->oobfree;
+	int status = 0;
+
+	/* Do we have available oob area? */
+	if (!of->length)
+		return -EPERM;
+
+	if (!nand_is_slc(chip))
+		return -EPERM;
+
+	chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize + of->offset, page);
+	chip->write_buf(mtd, chip->oob_poi + of->offset, of->length);
+	chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+	status = chip->waitfunc(mtd, chip);
+	return status & NAND_STATUS_FAIL ? -EIO : 0;
+}
+
+static int gpmi_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct gpmi_nand_data *this = chip->priv;
+	int ret = 0;
+	uint8_t *block_mark;
+	int column, page, status, chipnr;
+
+	chipnr = (int)(ofs >> chip->chip_shift);
+	chip->select_chip(mtd, chipnr);
+
+	column = this->swap_block_mark ? mtd->writesize : 0;
+
+	/* Write the block mark. */
+	block_mark = this->data_buffer_dma;
+	block_mark[0] = 0; /* bad block marker */
+
+	/* Shift to get page */
+	page = (int)(ofs >> chip->page_shift);
+
+	chip->cmdfunc(mtd, NAND_CMD_SEQIN, column, page);
+	chip->write_buf(mtd, block_mark, 1);
+	chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+	status = chip->waitfunc(mtd, chip);
+	if (status & NAND_STATUS_FAIL)
+		ret = -EIO;
+
+	chip->select_chip(mtd, -1);
+
+	return ret;
+}
+
+static int nand_boot_set_geometry(struct gpmi_nand_data *this)
+{
+	struct boot_rom_geometry *geometry = &this->rom_geometry;
+
+	/*
+	 * Set the boot block stride size.
+	 *
+	 * In principle, we should be reading this from the OTP bits, since
+	 * that's where the ROM is going to get it. In fact, we don't have any
+	 * way to read the OTP bits, so we go with the default and hope for the
+	 * best.
+	 */
+	geometry->stride_size_in_pages = 64;
+
+	/*
+	 * Set the search area stride exponent.
+	 *
+	 * In principle, we should be reading this from the OTP bits, since
+	 * that's where the ROM is going to get it. In fact, we don't have any
+	 * way to read the OTP bits, so we go with the default and hope for the
+	 * best.
+	 */
+	geometry->search_area_stride_exponent = 2;
+	return 0;
+}
+
+static const char  *fingerprint = "STMP";
+static int mx23_check_transcription_stamp(struct gpmi_nand_data *this)
+{
+	struct boot_rom_geometry *rom_geo = &this->rom_geometry;
+	struct device *dev = this->dev;
+	struct mtd_info *mtd = &this->mtd;
+	struct nand_chip *chip = &this->nand;
+	unsigned int search_area_size_in_strides;
+	unsigned int stride;
+	unsigned int page;
+	uint8_t *buffer = chip->buffers->databuf;
+	int saved_chip_number;
+	int found_an_ncb_fingerprint = false;
+
+	/* Compute the number of strides in a search area. */
+	search_area_size_in_strides = 1 << rom_geo->search_area_stride_exponent;
+
+	saved_chip_number = this->current_chip;
+	chip->select_chip(mtd, 0);
+
+	/*
+	 * Loop through the first search area, looking for the NCB fingerprint.
+	 */
+	dev_dbg(dev, "Scanning for an NCB fingerprint...\n");
+
+	for (stride = 0; stride < search_area_size_in_strides; stride++) {
+		/* Compute the page addresses. */
+		page = stride * rom_geo->stride_size_in_pages;
+
+		dev_dbg(dev, "Looking for a fingerprint in page 0x%x\n", page);
+
+		/*
+		 * Read the NCB fingerprint. The fingerprint is four bytes long
+		 * and starts in the 12th byte of the page.
+		 */
+		chip->cmdfunc(mtd, NAND_CMD_READ0, 12, page);
+		chip->read_buf(mtd, buffer, strlen(fingerprint));
+
+		/* Look for the fingerprint. */
+		if (!memcmp(buffer, fingerprint, strlen(fingerprint))) {
+			found_an_ncb_fingerprint = true;
+			break;
+		}
+
+	}
+
+	chip->select_chip(mtd, saved_chip_number);
+
+	if (found_an_ncb_fingerprint)
+		dev_dbg(dev, "\tFound a fingerprint\n");
+	else
+		dev_dbg(dev, "\tNo fingerprint found\n");
+	return found_an_ncb_fingerprint;
+}
+
+/* Writes a transcription stamp. */
+static int mx23_write_transcription_stamp(struct gpmi_nand_data *this)
+{
+	struct device *dev = this->dev;
+	struct boot_rom_geometry *rom_geo = &this->rom_geometry;
+	struct mtd_info *mtd = &this->mtd;
+	struct nand_chip *chip = &this->nand;
+	unsigned int block_size_in_pages;
+	unsigned int search_area_size_in_strides;
+	unsigned int search_area_size_in_pages;
+	unsigned int search_area_size_in_blocks;
+	unsigned int block;
+	unsigned int stride;
+	unsigned int page;
+	uint8_t      *buffer = chip->buffers->databuf;
+	int saved_chip_number;
+	int status;
+
+	/* Compute the search area geometry. */
+	block_size_in_pages = mtd->erasesize / mtd->writesize;
+	search_area_size_in_strides = 1 << rom_geo->search_area_stride_exponent;
+	search_area_size_in_pages = search_area_size_in_strides *
+					rom_geo->stride_size_in_pages;
+	search_area_size_in_blocks =
+		  (search_area_size_in_pages + (block_size_in_pages - 1)) /
+				    block_size_in_pages;
+
+	dev_dbg(dev, "Search Area Geometry :\n");
+	dev_dbg(dev, "\tin Blocks : %u\n", search_area_size_in_blocks);
+	dev_dbg(dev, "\tin Strides: %u\n", search_area_size_in_strides);
+	dev_dbg(dev, "\tin Pages  : %u\n", search_area_size_in_pages);
+
+	/* Select chip 0. */
+	saved_chip_number = this->current_chip;
+	chip->select_chip(mtd, 0);
+
+	/* Loop over blocks in the first search area, erasing them. */
+	dev_dbg(dev, "Erasing the search area...\n");
+
+	for (block = 0; block < search_area_size_in_blocks; block++) {
+		/* Compute the page address. */
+		page = block * block_size_in_pages;
+
+		/* Erase this block. */
+		dev_dbg(dev, "\tErasing block 0x%x\n", block);
+		chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page);
+		chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1);
+
+		/* Wait for the erase to finish. */
+		status = chip->waitfunc(mtd, chip);
+		if (status & NAND_STATUS_FAIL)
+			dev_err(dev, "[%s] Erase failed.\n", __func__);
+	}
+
+	/* Write the NCB fingerprint into the page buffer. */
+	memset(buffer, ~0, mtd->writesize);
+	memcpy(buffer + 12, fingerprint, strlen(fingerprint));
+
+	/* Loop through the first search area, writing NCB fingerprints. */
+	dev_dbg(dev, "Writing NCB fingerprints...\n");
+	for (stride = 0; stride < search_area_size_in_strides; stride++) {
+		/* Compute the page addresses. */
+		page = stride * rom_geo->stride_size_in_pages;
+
+		/* Write the first page of the current stride. */
+		dev_dbg(dev, "Writing an NCB fingerprint in page 0x%x\n", page);
+		chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
+		chip->ecc.write_page_raw(mtd, chip, buffer, 0);
+		chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+		/* Wait for the write to finish. */
+		status = chip->waitfunc(mtd, chip);
+		if (status & NAND_STATUS_FAIL)
+			dev_err(dev, "[%s] Write failed.\n", __func__);
+	}
+
+	/* Deselect chip 0. */
+	chip->select_chip(mtd, saved_chip_number);
+	return 0;
+}
+
+static int mx23_boot_init(struct gpmi_nand_data  *this)
+{
+	struct device *dev = this->dev;
+	struct nand_chip *chip = &this->nand;
+	struct mtd_info *mtd = &this->mtd;
+	unsigned int block_count;
+	unsigned int block;
+	int     chipnr;
+	int     page;
+	loff_t  byte;
+	uint8_t block_mark;
+	int     ret = 0;
+
+	/*
+	 * If control arrives here, we can't use block mark swapping, which
+	 * means we're forced to use transcription. First, scan for the
+	 * transcription stamp. If we find it, then we don't have to do
+	 * anything -- the block marks are already transcribed.
+	 */
+	if (mx23_check_transcription_stamp(this))
+		return 0;
+
+	/*
+	 * If control arrives here, we couldn't find a transcription stamp, so
+	 * so we presume the block marks are in the conventional location.
+	 */
+	dev_dbg(dev, "Transcribing bad block marks...\n");
+
+	/* Compute the number of blocks in the entire medium. */
+	block_count = chip->chipsize >> chip->phys_erase_shift;
+
+	/*
+	 * Loop over all the blocks in the medium, transcribing block marks as
+	 * we go.
+	 */
+	for (block = 0; block < block_count; block++) {
+		/*
+		 * Compute the chip, page and byte addresses for this block's
+		 * conventional mark.
+		 */
+		chipnr = block >> (chip->chip_shift - chip->phys_erase_shift);
+		page = block << (chip->phys_erase_shift - chip->page_shift);
+		byte = block <<  chip->phys_erase_shift;
+
+		/* Send the command to read the conventional block mark. */
+		chip->select_chip(mtd, chipnr);
+		chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
+		block_mark = chip->read_byte(mtd);
+		chip->select_chip(mtd, -1);
+
+		/*
+		 * Check if the block is marked bad. If so, we need to mark it
+		 * again, but this time the result will be a mark in the
+		 * location where we transcribe block marks.
+		 */
+		if (block_mark != 0xff) {
+			dev_dbg(dev, "Transcribing mark in block %u\n", block);
+			ret = chip->block_markbad(mtd, byte);
+			if (ret)
+				dev_err(dev, "Failed to mark block bad with "
+							"ret %d\n", ret);
+		}
+	}
+
+	/* Write the stamp that indicates we've transcribed the block marks. */
+	mx23_write_transcription_stamp(this);
+	return 0;
+}
+
+static int nand_boot_init(struct gpmi_nand_data  *this)
+{
+	nand_boot_set_geometry(this);
+
+	/* This is ROM arch-specific initilization before the BBT scanning. */
+	if (GPMI_IS_MX23(this))
+		return mx23_boot_init(this);
+	return 0;
+}
+
+static int gpmi_set_geometry(struct gpmi_nand_data *this)
+{
+	int ret;
+
+	/* Free the temporary DMA memory for reading ID. */
+	gpmi_free_dma_buffer(this);
+
+	/* Set up the NFC geometry which is used by BCH. */
+	ret = bch_set_geometry(this);
+	if (ret) {
+		dev_err(this->dev, "Error setting BCH geometry : %d\n", ret);
+		return ret;
+	}
+
+	/* Alloc the new DMA buffers according to the pagesize and oobsize */
+	return gpmi_alloc_dma_buffer(this);
+}
+
+static void gpmi_nand_exit(struct gpmi_nand_data *this)
+{
+	nand_release(&this->mtd);
+	gpmi_free_dma_buffer(this);
+}
+
+static int gpmi_init_last(struct gpmi_nand_data *this)
+{
+	struct mtd_info *mtd = &this->mtd;
+	struct nand_chip *chip = mtd->priv;
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+	struct bch_geometry *bch_geo = &this->bch_geometry;
+	int ret;
+
+	/* Set up swap_block_mark, must be set before the gpmi_set_geometry() */
+	this->swap_block_mark = !GPMI_IS_MX23(this);
+
+	/* Set up the medium geometry */
+	ret = gpmi_set_geometry(this);
+	if (ret)
+		return ret;
+
+	/* Init the nand_ecc_ctrl{} */
+	ecc->read_page	= gpmi_ecc_read_page;
+	ecc->write_page	= gpmi_ecc_write_page;
+	ecc->read_oob	= gpmi_ecc_read_oob;
+	ecc->write_oob	= gpmi_ecc_write_oob;
+	ecc->mode	= NAND_ECC_HW;
+	ecc->size	= bch_geo->ecc_chunk_size;
+	ecc->strength	= bch_geo->ecc_strength;
+	ecc->layout	= &gpmi_hw_ecclayout;
+
+	/*
+	 * We only enable the subpage read when:
+	 *  (1) the chip is imx6, and
+	 *  (2) the size of the ECC parity is byte aligned.
+	 */
+	if (GPMI_IS_MX6(this) &&
+		((bch_geo->gf_len * bch_geo->ecc_strength) % 8) == 0) {
+		ecc->read_subpage = gpmi_ecc_read_subpage;
+		chip->options |= NAND_SUBPAGE_READ;
+	}
+
+	/*
+	 * Can we enable the extra features? such as EDO or Sync mode.
+	 *
+	 * We do not check the return value now. That's means if we fail in
+	 * enable the extra features, we still can run in the normal way.
+	 */
+	gpmi_extra_init(this);
+
+	return 0;
+}
+
+static int gpmi_nand_init(struct gpmi_nand_data *this)
+{
+	struct mtd_info  *mtd = &this->mtd;
+	struct nand_chip *chip = &this->nand;
+	struct mtd_part_parser_data ppdata = {};
+	int ret;
+
+	/* init current chip */
+	this->current_chip	= -1;
+
+	/* init the MTD data structures */
+	mtd->priv		= chip;
+	mtd->name		= "gpmi-nand";
+	mtd->owner		= THIS_MODULE;
+
+	/* init the nand_chip{}, we don't support a 16-bit NAND Flash bus. */
+	chip->priv		= this;
+	chip->select_chip	= gpmi_select_chip;
+	chip->cmd_ctrl		= gpmi_cmd_ctrl;
+	chip->dev_ready		= gpmi_dev_ready;
+	chip->read_byte		= gpmi_read_byte;
+	chip->read_buf		= gpmi_read_buf;
+	chip->write_buf		= gpmi_write_buf;
+	chip->badblock_pattern	= &gpmi_bbt_descr;
+	chip->block_markbad	= gpmi_block_markbad;
+	chip->options		|= NAND_NO_SUBPAGE_WRITE;
+	if (of_get_nand_on_flash_bbt(this->dev->of_node))
+		chip->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB;
+
+	/*
+	 * Allocate a temporary DMA buffer for reading ID in the
+	 * nand_scan_ident().
+	 */
+	this->bch_geometry.payload_size = 1024;
+	this->bch_geometry.auxiliary_size = 128;
+	ret = gpmi_alloc_dma_buffer(this);
+	if (ret)
+		goto err_out;
+
+	ret = nand_scan_ident(mtd, GPMI_IS_MX6(this) ? 2 : 1, NULL);
+	if (ret)
+		goto err_out;
+
+	ret = gpmi_init_last(this);
+	if (ret)
+		goto err_out;
+
+	chip->options |= NAND_SKIP_BBTSCAN;
+	ret = nand_scan_tail(mtd);
+	if (ret)
+		goto err_out;
+
+	ret = nand_boot_init(this);
+	if (ret)
+		goto err_out;
+	chip->scan_bbt(mtd);
+
+	ppdata.of_node = this->pdev->dev.of_node;
+	ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
+	if (ret)
+		goto err_out;
+	return 0;
+
+err_out:
+	gpmi_nand_exit(this);
+	return ret;
+}
+
+static const struct of_device_id gpmi_nand_id_table[] = {
+	{
+		.compatible = "fsl,imx23-gpmi-nand",
+		.data = (void *)&gpmi_devdata_imx23,
+	}, {
+		.compatible = "fsl,imx28-gpmi-nand",
+		.data = (void *)&gpmi_devdata_imx28,
+	}, {
+		.compatible = "fsl,imx6q-gpmi-nand",
+		.data = (void *)&gpmi_devdata_imx6q,
+	}, {
+		.compatible = "fsl,imx6sx-gpmi-nand",
+		.data = (void *)&gpmi_devdata_imx6sx,
+	}, {}
+};
+MODULE_DEVICE_TABLE(of, gpmi_nand_id_table);
+
+static int gpmi_nand_probe(struct platform_device *pdev)
+{
+	struct gpmi_nand_data *this;
+	const struct of_device_id *of_id;
+	int ret;
+
+	this = devm_kzalloc(&pdev->dev, sizeof(*this), GFP_KERNEL);
+	if (!this)
+		return -ENOMEM;
+
+	of_id = of_match_device(gpmi_nand_id_table, &pdev->dev);
+	if (of_id) {
+		this->devdata = of_id->data;
+	} else {
+		dev_err(&pdev->dev, "Failed to find the right device id.\n");
+		return -ENODEV;
+	}
+
+	platform_set_drvdata(pdev, this);
+	this->pdev  = pdev;
+	this->dev   = &pdev->dev;
+
+	ret = acquire_resources(this);
+	if (ret)
+		goto exit_acquire_resources;
+
+	ret = init_hardware(this);
+	if (ret)
+		goto exit_nfc_init;
+
+	ret = gpmi_nand_init(this);
+	if (ret)
+		goto exit_nfc_init;
+
+	dev_info(this->dev, "driver registered.\n");
+
+	return 0;
+
+exit_nfc_init:
+	release_resources(this);
+exit_acquire_resources:
+	dev_err(this->dev, "driver registration failed: %d\n", ret);
+
+	return ret;
+}
+
+static int gpmi_nand_remove(struct platform_device *pdev)
+{
+	struct gpmi_nand_data *this = platform_get_drvdata(pdev);
+
+	gpmi_nand_exit(this);
+	release_resources(this);
+	return 0;
+}
+
+static struct platform_driver gpmi_nand_driver = {
+	.driver = {
+		.name = "gpmi-nand",
+		.of_match_table = gpmi_nand_id_table,
+	},
+	.probe   = gpmi_nand_probe,
+	.remove  = gpmi_nand_remove,
+};
+module_platform_driver(gpmi_nand_driver);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("i.MX GPMI NAND Flash Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
new file mode 100644
index 00000000000..32c6ba49f98
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
@@ -0,0 +1,305 @@
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __DRIVERS_MTD_NAND_GPMI_NAND_H
+#define __DRIVERS_MTD_NAND_GPMI_NAND_H
+
+#include <linux/mtd/nand.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+
+#define GPMI_CLK_MAX 5 /* MX6Q needs five clocks */
+struct resources {
+	void __iomem  *gpmi_regs;
+	void __iomem  *bch_regs;
+	unsigned int  dma_low_channel;
+	unsigned int  dma_high_channel;
+	struct clk    *clock[GPMI_CLK_MAX];
+};
+
+/**
+ * struct bch_geometry - BCH geometry description.
+ * @gf_len:                   The length of Galois Field. (e.g., 13 or 14)
+ * @ecc_strength:             A number that describes the strength of the ECC
+ *                            algorithm.
+ * @page_size:                The size, in bytes, of a physical page, including
+ *                            both data and OOB.
+ * @metadata_size:            The size, in bytes, of the metadata.
+ * @ecc_chunk_size:           The size, in bytes, of a single ECC chunk. Note
+ *                            the first chunk in the page includes both data and
+ *                            metadata, so it's a bit larger than this value.
+ * @ecc_chunk_count:          The number of ECC chunks in the page,
+ * @payload_size:             The size, in bytes, of the payload buffer.
+ * @auxiliary_size:           The size, in bytes, of the auxiliary buffer.
+ * @auxiliary_status_offset:  The offset into the auxiliary buffer at which
+ *                            the ECC status appears.
+ * @block_mark_byte_offset:   The byte offset in the ECC-based page view at
+ *                            which the underlying physical block mark appears.
+ * @block_mark_bit_offset:    The bit offset into the ECC-based page view at
+ *                            which the underlying physical block mark appears.
+ */
+struct bch_geometry {
+	unsigned int  gf_len;
+	unsigned int  ecc_strength;
+	unsigned int  page_size;
+	unsigned int  metadata_size;
+	unsigned int  ecc_chunk_size;
+	unsigned int  ecc_chunk_count;
+	unsigned int  payload_size;
+	unsigned int  auxiliary_size;
+	unsigned int  auxiliary_status_offset;
+	unsigned int  block_mark_byte_offset;
+	unsigned int  block_mark_bit_offset;
+};
+
+/**
+ * struct boot_rom_geometry - Boot ROM geometry description.
+ * @stride_size_in_pages:        The size of a boot block stride, in pages.
+ * @search_area_stride_exponent: The logarithm to base 2 of the size of a
+ *                               search area in boot block strides.
+ */
+struct boot_rom_geometry {
+	unsigned int  stride_size_in_pages;
+	unsigned int  search_area_stride_exponent;
+};
+
+/* DMA operations types */
+enum dma_ops_type {
+	DMA_FOR_COMMAND = 1,
+	DMA_FOR_READ_DATA,
+	DMA_FOR_WRITE_DATA,
+	DMA_FOR_READ_ECC_PAGE,
+	DMA_FOR_WRITE_ECC_PAGE
+};
+
+/**
+ * struct nand_timing - Fundamental timing attributes for NAND.
+ * @data_setup_in_ns:         The data setup time, in nanoseconds. Usually the
+ *                            maximum of tDS and tWP. A negative value
+ *                            indicates this characteristic isn't known.
+ * @data_hold_in_ns:          The data hold time, in nanoseconds. Usually the
+ *                            maximum of tDH, tWH and tREH. A negative value
+ *                            indicates this characteristic isn't known.
+ * @address_setup_in_ns:      The address setup time, in nanoseconds. Usually
+ *                            the maximum of tCLS, tCS and tALS. A negative
+ *                            value indicates this characteristic isn't known.
+ * @gpmi_sample_delay_in_ns:  A GPMI-specific timing parameter. A negative value
+ *                            indicates this characteristic isn't known.
+ * @tREA_in_ns:               tREA, in nanoseconds, from the data sheet. A
+ *                            negative value indicates this characteristic isn't
+ *                            known.
+ * @tRLOH_in_ns:              tRLOH, in nanoseconds, from the data sheet. A
+ *                            negative value indicates this characteristic isn't
+ *                            known.
+ * @tRHOH_in_ns:              tRHOH, in nanoseconds, from the data sheet. A
+ *                            negative value indicates this characteristic isn't
+ *                            known.
+ */
+struct nand_timing {
+	int8_t  data_setup_in_ns;
+	int8_t  data_hold_in_ns;
+	int8_t  address_setup_in_ns;
+	int8_t  gpmi_sample_delay_in_ns;
+	int8_t  tREA_in_ns;
+	int8_t  tRLOH_in_ns;
+	int8_t  tRHOH_in_ns;
+};
+
+enum gpmi_type {
+	IS_MX23,
+	IS_MX28,
+	IS_MX6Q,
+	IS_MX6SX
+};
+
+struct gpmi_devdata {
+	enum gpmi_type type;
+	int bch_max_ecc_strength;
+	int max_chain_delay; /* See the async EDO mode */
+};
+
+struct gpmi_nand_data {
+	/* flags */
+#define GPMI_ASYNC_EDO_ENABLED	(1 << 0)
+#define GPMI_TIMING_INIT_OK	(1 << 1)
+	int			flags;
+	const struct gpmi_devdata *devdata;
+
+	/* System Interface */
+	struct device		*dev;
+	struct platform_device	*pdev;
+
+	/* Resources */
+	struct resources	resources;
+
+	/* Flash Hardware */
+	struct nand_timing	timing;
+	int			timing_mode;
+
+	/* BCH */
+	struct bch_geometry	bch_geometry;
+	struct completion	bch_done;
+
+	/* NAND Boot issue */
+	bool			swap_block_mark;
+	struct boot_rom_geometry rom_geometry;
+
+	/* MTD / NAND */
+	struct nand_chip	nand;
+	struct mtd_info		mtd;
+
+	/* General-use Variables */
+	int			current_chip;
+	unsigned int		command_length;
+
+	/* passed from upper layer */
+	uint8_t			*upper_buf;
+	int			upper_len;
+
+	/* for DMA operations */
+	bool			direct_dma_map_ok;
+
+	struct scatterlist	cmd_sgl;
+	char			*cmd_buffer;
+
+	struct scatterlist	data_sgl;
+	char			*data_buffer_dma;
+
+	void			*page_buffer_virt;
+	dma_addr_t		page_buffer_phys;
+	unsigned int		page_buffer_size;
+
+	void			*payload_virt;
+	dma_addr_t		payload_phys;
+
+	void			*auxiliary_virt;
+	dma_addr_t		auxiliary_phys;
+
+	/* DMA channels */
+#define DMA_CHANS		8
+	struct dma_chan		*dma_chans[DMA_CHANS];
+	enum dma_ops_type	last_dma_type;
+	enum dma_ops_type	dma_type;
+	struct completion	dma_done;
+
+	/* private */
+	void			*private;
+};
+
+/**
+ * struct gpmi_nfc_hardware_timing - GPMI hardware timing parameters.
+ * @data_setup_in_cycles:      The data setup time, in cycles.
+ * @data_hold_in_cycles:       The data hold time, in cycles.
+ * @address_setup_in_cycles:   The address setup time, in cycles.
+ * @device_busy_timeout:       The timeout waiting for NAND Ready/Busy,
+ *                             this value is the number of cycles multiplied
+ *                             by 4096.
+ * @use_half_periods:          Indicates the clock is running slowly, so the
+ *                             NFC DLL should use half-periods.
+ * @sample_delay_factor:       The sample delay factor.
+ * @wrn_dly_sel:               The delay on the GPMI write strobe.
+ */
+struct gpmi_nfc_hardware_timing {
+	/* for HW_GPMI_TIMING0 */
+	uint8_t  data_setup_in_cycles;
+	uint8_t  data_hold_in_cycles;
+	uint8_t  address_setup_in_cycles;
+
+	/* for HW_GPMI_TIMING1 */
+	uint16_t device_busy_timeout;
+#define GPMI_DEFAULT_BUSY_TIMEOUT	0x500 /* default busy timeout value.*/
+
+	/* for HW_GPMI_CTRL1 */
+	bool     use_half_periods;
+	uint8_t  sample_delay_factor;
+	uint8_t  wrn_dly_sel;
+};
+
+/**
+ * struct timing_threshod - Timing threshold
+ * @max_data_setup_cycles:       The maximum number of data setup cycles that
+ *                               can be expressed in the hardware.
+ * @internal_data_setup_in_ns:   The time, in ns, that the NFC hardware requires
+ *                               for data read internal setup. In the Reference
+ *                               Manual, see the chapter "High-Speed NAND
+ *                               Timing" for more details.
+ * @max_sample_delay_factor:     The maximum sample delay factor that can be
+ *                               expressed in the hardware.
+ * @max_dll_clock_period_in_ns:  The maximum period of the GPMI clock that the
+ *                               sample delay DLL hardware can possibly work
+ *                               with (the DLL is unusable with longer periods).
+ *                               If the full-cycle period is greater than HALF
+ *                               this value, the DLL must be configured to use
+ *                               half-periods.
+ * @max_dll_delay_in_ns:         The maximum amount of delay, in ns, that the
+ *                               DLL can implement.
+ * @clock_frequency_in_hz:       The clock frequency, in Hz, during the current
+ *                               I/O transaction. If no I/O transaction is in
+ *                               progress, this is the clock frequency during
+ *                               the most recent I/O transaction.
+ */
+struct timing_threshod {
+	const unsigned int      max_chip_count;
+	const unsigned int      max_data_setup_cycles;
+	const unsigned int      internal_data_setup_in_ns;
+	const unsigned int      max_sample_delay_factor;
+	const unsigned int      max_dll_clock_period_in_ns;
+	const unsigned int      max_dll_delay_in_ns;
+	unsigned long           clock_frequency_in_hz;
+
+};
+
+/* Common Services */
+extern int common_nfc_set_geometry(struct gpmi_nand_data *);
+extern struct dma_chan *get_dma_chan(struct gpmi_nand_data *);
+extern void prepare_data_dma(struct gpmi_nand_data *,
+				enum dma_data_direction dr);
+extern int start_dma_without_bch_irq(struct gpmi_nand_data *,
+				struct dma_async_tx_descriptor *);
+extern int start_dma_with_bch_irq(struct gpmi_nand_data *,
+				struct dma_async_tx_descriptor *);
+
+/* GPMI-NAND helper function library */
+extern int gpmi_init(struct gpmi_nand_data *);
+extern int gpmi_extra_init(struct gpmi_nand_data *);
+extern void gpmi_clear_bch(struct gpmi_nand_data *);
+extern void gpmi_dump_info(struct gpmi_nand_data *);
+extern int bch_set_geometry(struct gpmi_nand_data *);
+extern int gpmi_is_ready(struct gpmi_nand_data *, unsigned chip);
+extern int gpmi_send_command(struct gpmi_nand_data *);
+extern void gpmi_begin(struct gpmi_nand_data *);
+extern void gpmi_end(struct gpmi_nand_data *);
+extern int gpmi_read_data(struct gpmi_nand_data *);
+extern int gpmi_send_data(struct gpmi_nand_data *);
+extern int gpmi_send_page(struct gpmi_nand_data *,
+			dma_addr_t payload, dma_addr_t auxiliary);
+extern int gpmi_read_page(struct gpmi_nand_data *,
+			dma_addr_t payload, dma_addr_t auxiliary);
+
+/* BCH : Status Block Completion Codes */
+#define STATUS_GOOD		0x00
+#define STATUS_ERASED		0xff
+#define STATUS_UNCORRECTABLE	0xfe
+
+/* Use the devdata to distinguish different Archs. */
+#define GPMI_IS_MX23(x)		((x)->devdata->type == IS_MX23)
+#define GPMI_IS_MX28(x)		((x)->devdata->type == IS_MX28)
+#define GPMI_IS_MX6Q(x)		((x)->devdata->type == IS_MX6Q)
+#define GPMI_IS_MX6SX(x)	((x)->devdata->type == IS_MX6SX)
+
+#define GPMI_IS_MX6(x)		(GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x))
+#endif
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-regs.h b/drivers/mtd/nand/gpmi-nand/gpmi-regs.h
new file mode 100644
index 00000000000..82114cdc833
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-regs.h
@@ -0,0 +1,187 @@
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef __GPMI_NAND_GPMI_REGS_H
+#define __GPMI_NAND_GPMI_REGS_H
+
+#define HW_GPMI_CTRL0					0x00000000
+#define HW_GPMI_CTRL0_SET				0x00000004
+#define HW_GPMI_CTRL0_CLR				0x00000008
+#define HW_GPMI_CTRL0_TOG				0x0000000c
+
+#define BP_GPMI_CTRL0_COMMAND_MODE			24
+#define BM_GPMI_CTRL0_COMMAND_MODE	(3 << BP_GPMI_CTRL0_COMMAND_MODE)
+#define BF_GPMI_CTRL0_COMMAND_MODE(v)	\
+	(((v) << BP_GPMI_CTRL0_COMMAND_MODE) & BM_GPMI_CTRL0_COMMAND_MODE)
+#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE		0x0
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ		0x1
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE	0x2
+#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY	0x3
+
+#define BM_GPMI_CTRL0_WORD_LENGTH			(1 << 23)
+#define BV_GPMI_CTRL0_WORD_LENGTH__16_BIT		0x0
+#define BV_GPMI_CTRL0_WORD_LENGTH__8_BIT		0x1
+
+/*
+ *  Difference in LOCK_CS between imx23 and imx28 :
+ *  This bit may impact the _POWER_ consumption. So some chips
+ *  do not set it.
+ */
+#define MX23_BP_GPMI_CTRL0_LOCK_CS			22
+#define MX28_BP_GPMI_CTRL0_LOCK_CS			27
+#define LOCK_CS_ENABLE					0x1
+#define BF_GPMI_CTRL0_LOCK_CS(v, x)			0x0
+
+/* Difference in CS between imx23 and imx28 */
+#define BP_GPMI_CTRL0_CS				20
+#define MX23_BM_GPMI_CTRL0_CS		(3 << BP_GPMI_CTRL0_CS)
+#define MX28_BM_GPMI_CTRL0_CS		(7 << BP_GPMI_CTRL0_CS)
+#define BF_GPMI_CTRL0_CS(v, x)		(((v) << BP_GPMI_CTRL0_CS) & \
+						(GPMI_IS_MX23((x)) \
+						? MX23_BM_GPMI_CTRL0_CS	\
+						: MX28_BM_GPMI_CTRL0_CS))
+
+#define BP_GPMI_CTRL0_ADDRESS				17
+#define BM_GPMI_CTRL0_ADDRESS		(3 << BP_GPMI_CTRL0_ADDRESS)
+#define BF_GPMI_CTRL0_ADDRESS(v)	\
+		(((v) << BP_GPMI_CTRL0_ADDRESS) & BM_GPMI_CTRL0_ADDRESS)
+#define BV_GPMI_CTRL0_ADDRESS__NAND_DATA		0x0
+#define BV_GPMI_CTRL0_ADDRESS__NAND_CLE			0x1
+#define BV_GPMI_CTRL0_ADDRESS__NAND_ALE			0x2
+
+#define BM_GPMI_CTRL0_ADDRESS_INCREMENT			(1 << 16)
+#define BV_GPMI_CTRL0_ADDRESS_INCREMENT__DISABLED	0x0
+#define BV_GPMI_CTRL0_ADDRESS_INCREMENT__ENABLED	0x1
+
+#define BP_GPMI_CTRL0_XFER_COUNT			0
+#define BM_GPMI_CTRL0_XFER_COUNT	(0xffff << BP_GPMI_CTRL0_XFER_COUNT)
+#define BF_GPMI_CTRL0_XFER_COUNT(v)	\
+		(((v) << BP_GPMI_CTRL0_XFER_COUNT) & BM_GPMI_CTRL0_XFER_COUNT)
+
+#define HW_GPMI_COMPARE					0x00000010
+
+#define HW_GPMI_ECCCTRL					0x00000020
+#define HW_GPMI_ECCCTRL_SET				0x00000024
+#define HW_GPMI_ECCCTRL_CLR				0x00000028
+#define HW_GPMI_ECCCTRL_TOG				0x0000002c
+
+#define BP_GPMI_ECCCTRL_ECC_CMD				13
+#define BM_GPMI_ECCCTRL_ECC_CMD		(3 << BP_GPMI_ECCCTRL_ECC_CMD)
+#define BF_GPMI_ECCCTRL_ECC_CMD(v)	\
+		(((v) << BP_GPMI_ECCCTRL_ECC_CMD) & BM_GPMI_ECCCTRL_ECC_CMD)
+#define BV_GPMI_ECCCTRL_ECC_CMD__BCH_DECODE		0x0
+#define BV_GPMI_ECCCTRL_ECC_CMD__BCH_ENCODE		0x1
+
+#define BM_GPMI_ECCCTRL_ENABLE_ECC			(1 << 12)
+#define BV_GPMI_ECCCTRL_ENABLE_ECC__ENABLE		0x1
+#define BV_GPMI_ECCCTRL_ENABLE_ECC__DISABLE		0x0
+
+#define BP_GPMI_ECCCTRL_BUFFER_MASK			0
+#define BM_GPMI_ECCCTRL_BUFFER_MASK	(0x1ff << BP_GPMI_ECCCTRL_BUFFER_MASK)
+#define BF_GPMI_ECCCTRL_BUFFER_MASK(v)	\
+	(((v) << BP_GPMI_ECCCTRL_BUFFER_MASK) & BM_GPMI_ECCCTRL_BUFFER_MASK)
+#define BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY	0x100
+#define BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE		0x1FF
+
+#define HW_GPMI_ECCCOUNT				0x00000030
+#define HW_GPMI_PAYLOAD					0x00000040
+#define HW_GPMI_AUXILIARY				0x00000050
+#define HW_GPMI_CTRL1					0x00000060
+#define HW_GPMI_CTRL1_SET				0x00000064
+#define HW_GPMI_CTRL1_CLR				0x00000068
+#define HW_GPMI_CTRL1_TOG				0x0000006c
+
+#define BP_GPMI_CTRL1_DECOUPLE_CS			24
+#define BM_GPMI_CTRL1_DECOUPLE_CS	(1 << BP_GPMI_CTRL1_DECOUPLE_CS)
+
+#define BP_GPMI_CTRL1_WRN_DLY_SEL			22
+#define BM_GPMI_CTRL1_WRN_DLY_SEL	(0x3 << BP_GPMI_CTRL1_WRN_DLY_SEL)
+#define BF_GPMI_CTRL1_WRN_DLY_SEL(v)  \
+	(((v) << BP_GPMI_CTRL1_WRN_DLY_SEL) & BM_GPMI_CTRL1_WRN_DLY_SEL)
+#define BV_GPMI_CTRL1_WRN_DLY_SEL_4_TO_8NS		0x0
+#define BV_GPMI_CTRL1_WRN_DLY_SEL_6_TO_10NS		0x1
+#define BV_GPMI_CTRL1_WRN_DLY_SEL_7_TO_12NS		0x2
+#define BV_GPMI_CTRL1_WRN_DLY_SEL_NO_DELAY		0x3
+
+#define BM_GPMI_CTRL1_BCH_MODE				(1 << 18)
+
+#define BP_GPMI_CTRL1_DLL_ENABLE			17
+#define BM_GPMI_CTRL1_DLL_ENABLE	(1 << BP_GPMI_CTRL1_DLL_ENABLE)
+
+#define BP_GPMI_CTRL1_HALF_PERIOD			16
+#define BM_GPMI_CTRL1_HALF_PERIOD	(1 << BP_GPMI_CTRL1_HALF_PERIOD)
+
+#define BP_GPMI_CTRL1_RDN_DELAY				12
+#define BM_GPMI_CTRL1_RDN_DELAY		(0xf << BP_GPMI_CTRL1_RDN_DELAY)
+#define BF_GPMI_CTRL1_RDN_DELAY(v)	\
+		(((v) << BP_GPMI_CTRL1_RDN_DELAY) & BM_GPMI_CTRL1_RDN_DELAY)
+
+#define BM_GPMI_CTRL1_DEV_RESET				(1 << 3)
+#define BV_GPMI_CTRL1_DEV_RESET__ENABLED		0x0
+#define BV_GPMI_CTRL1_DEV_RESET__DISABLED		0x1
+
+#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY		(1 << 2)
+#define BV_GPMI_CTRL1_ATA_IRQRDY_POLARITY__ACTIVELOW	0x0
+#define BV_GPMI_CTRL1_ATA_IRQRDY_POLARITY__ACTIVEHIGH	0x1
+
+#define BM_GPMI_CTRL1_CAMERA_MODE			(1 << 1)
+#define BV_GPMI_CTRL1_GPMI_MODE__NAND			0x0
+#define BV_GPMI_CTRL1_GPMI_MODE__ATA			0x1
+
+#define BM_GPMI_CTRL1_GPMI_MODE				(1 << 0)
+
+#define HW_GPMI_TIMING0					0x00000070
+
+#define BP_GPMI_TIMING0_ADDRESS_SETUP			16
+#define BM_GPMI_TIMING0_ADDRESS_SETUP	(0xff << BP_GPMI_TIMING0_ADDRESS_SETUP)
+#define BF_GPMI_TIMING0_ADDRESS_SETUP(v)	\
+	(((v) << BP_GPMI_TIMING0_ADDRESS_SETUP) & BM_GPMI_TIMING0_ADDRESS_SETUP)
+
+#define BP_GPMI_TIMING0_DATA_HOLD			8
+#define BM_GPMI_TIMING0_DATA_HOLD	(0xff << BP_GPMI_TIMING0_DATA_HOLD)
+#define BF_GPMI_TIMING0_DATA_HOLD(v)		\
+	(((v) << BP_GPMI_TIMING0_DATA_HOLD) & BM_GPMI_TIMING0_DATA_HOLD)
+
+#define BP_GPMI_TIMING0_DATA_SETUP			0
+#define BM_GPMI_TIMING0_DATA_SETUP	(0xff << BP_GPMI_TIMING0_DATA_SETUP)
+#define BF_GPMI_TIMING0_DATA_SETUP(v)		\
+	(((v) << BP_GPMI_TIMING0_DATA_SETUP) & BM_GPMI_TIMING0_DATA_SETUP)
+
+#define HW_GPMI_TIMING1					0x00000080
+#define BP_GPMI_TIMING1_BUSY_TIMEOUT			16
+#define BM_GPMI_TIMING1_BUSY_TIMEOUT	(0xffff << BP_GPMI_TIMING1_BUSY_TIMEOUT)
+#define BF_GPMI_TIMING1_BUSY_TIMEOUT(v)		\
+	(((v) << BP_GPMI_TIMING1_BUSY_TIMEOUT) & BM_GPMI_TIMING1_BUSY_TIMEOUT)
+
+#define HW_GPMI_TIMING2					0x00000090
+#define HW_GPMI_DATA					0x000000a0
+
+/* MX28 uses this to detect READY. */
+#define HW_GPMI_STAT					0x000000b0
+#define MX28_BP_GPMI_STAT_READY_BUSY			24
+#define MX28_BM_GPMI_STAT_READY_BUSY	(0xff << MX28_BP_GPMI_STAT_READY_BUSY)
+#define MX28_BF_GPMI_STAT_READY_BUSY(v)		\
+	(((v) << MX28_BP_GPMI_STAT_READY_BUSY) & MX28_BM_GPMI_STAT_READY_BUSY)
+
+/* MX23 uses this to detect READY. */
+#define HW_GPMI_DEBUG					0x000000c0
+#define MX23_BP_GPMI_DEBUG_READY0			28
+#define MX23_BM_GPMI_DEBUG_READY0	(1 << MX23_BP_GPMI_DEBUG_READY0)
+#endif
diff --git a/drivers/mtd/nand/h1910.c b/drivers/mtd/nand/h1910.c
deleted file mode 100644
index f8ce79b446e..00000000000
--- a/drivers/mtd/nand/h1910.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- *  drivers/mtd/nand/h1910.c
- *
- *  Copyright (C) 2003 Joshua Wise (joshua@joshuawise.com)
- *
- *  Derived from drivers/mtd/nand/edb7312.c
- *       Copyright (C) 2002 Marius Gröger (mag@sysgo.de)
- *       Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Overview:
- *   This is a device driver for the NAND flash device found on the
- *   iPAQ h1910 board which utilizes the Samsung K9F2808 part. This is
- *   a 128Mibit (16MiB x 8 bits) NAND flash device.
- */
-
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <asm/io.h>
-#include <mach/hardware.h>	/* for CLPS7111_VIRT_BASE */
-#include <asm/sizes.h>
-#include <mach/h1900-gpio.h>
-#include <mach/ipaq.h>
-
-/*
- * MTD structure for EDB7312 board
- */
-static struct mtd_info *h1910_nand_mtd = NULL;
-
-/*
- * Module stuff
- */
-
-#ifdef CONFIG_MTD_PARTITIONS
-/*
- * Define static partitions for flash device
- */
-static struct mtd_partition partition_info[] = {
-      {name:"h1910 NAND Flash",
-	      offset:0,
-      size:16 * 1024 * 1024}
-};
-
-#define NUM_PARTITIONS 1
-
-#endif
-
-/*
- *	hardware specific access to control-lines
- *
- *	NAND_NCE: bit 0 - don't care
- *	NAND_CLE: bit 1 - address bit 2
- *	NAND_ALE: bit 2 - address bit 3
- */
-static void h1910_hwcontrol(struct mtd_info *mtd, int cmd,
-			    unsigned int ctrl)
-{
-	struct nand_chip *chip = mtd->priv;
-
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, chip->IO_ADDR_W | ((ctrl & 0x6) << 1));
-}
-
-/*
- *	read device ready pin
- */
-#if 0
-static int h1910_device_ready(struct mtd_info *mtd)
-{
-	return (GPLR(55) & GPIO_bit(55));
-}
-#endif
-
-/*
- * Main initialization routine
- */
-static int __init h1910_init(void)
-{
-	struct nand_chip *this;
-	const char *part_type = 0;
-	int mtd_parts_nb = 0;
-	struct mtd_partition *mtd_parts = 0;
-	void __iomem *nandaddr;
-
-	if (!machine_is_h1900())
-		return -ENODEV;
-
-	nandaddr = ioremap(0x08000000, 0x1000);
-	if (!nandaddr) {
-		printk("Failed to ioremap nand flash.\n");
-		return -ENOMEM;
-	}
-
-	/* Allocate memory for MTD device structure and private data */
-	h1910_nand_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
-	if (!h1910_nand_mtd) {
-		printk("Unable to allocate h1910 NAND MTD device structure.\n");
-		iounmap((void *)nandaddr);
-		return -ENOMEM;
-	}
-
-	/* Get pointer to private data */
-	this = (struct nand_chip *)(&h1910_nand_mtd[1]);
-
-	/* Initialize structures */
-	memset(h1910_nand_mtd, 0, sizeof(struct mtd_info));
-	memset(this, 0, sizeof(struct nand_chip));
-
-	/* Link the private data with the MTD structure */
-	h1910_nand_mtd->priv = this;
-	h1910_nand_mtd->owner = THIS_MODULE;
-
-	/*
-	 * Enable VPEN
-	 */
-	GPSR(37) = GPIO_bit(37);
-
-	/* insert callbacks */
-	this->IO_ADDR_R = nandaddr;
-	this->IO_ADDR_W = nandaddr;
-	this->cmd_ctrl = h1910_hwcontrol;
-	this->dev_ready = NULL;	/* unknown whether that was correct or not so we will just do it like this */
-	/* 15 us command delay time */
-	this->chip_delay = 50;
-	this->ecc.mode = NAND_ECC_SOFT;
-	this->options = NAND_NO_AUTOINCR;
-
-	/* Scan to find existence of the device */
-	if (nand_scan(h1910_nand_mtd, 1)) {
-		printk(KERN_NOTICE "No NAND device - returning -ENXIO\n");
-		kfree(h1910_nand_mtd);
-		iounmap((void *)nandaddr);
-		return -ENXIO;
-	}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-	mtd_parts_nb = parse_cmdline_partitions(h1910_nand_mtd, &mtd_parts, "h1910-nand");
-	if (mtd_parts_nb > 0)
-		part_type = "command line";
-	else
-		mtd_parts_nb = 0;
-#endif
-	if (mtd_parts_nb == 0) {
-		mtd_parts = partition_info;
-		mtd_parts_nb = NUM_PARTITIONS;
-		part_type = "static";
-	}
-
-	/* Register the partitions */
-	printk(KERN_NOTICE "Using %s partition definition\n", part_type);
-	add_mtd_partitions(h1910_nand_mtd, mtd_parts, mtd_parts_nb);
-
-	/* Return happy */
-	return 0;
-}
-
-module_init(h1910_init);
-
-/*
- * Clean up routine
- */
-static void __exit h1910_cleanup(void)
-{
-	struct nand_chip *this = (struct nand_chip *)&h1910_nand_mtd[1];
-
-	/* Release resources, unregister device */
-	nand_release(h1910_nand_mtd);
-
-	/* Release io resource */
-	iounmap((void *)this->IO_ADDR_W);
-
-	/* Free the MTD device structure */
-	kfree(h1910_nand_mtd);
-}
-
-module_exit(h1910_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Joshua Wise <joshua at joshuawise dot com>");
-MODULE_DESCRIPTION("NAND flash driver for iPAQ h1910");
diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c
new file mode 100644
index 00000000000..a2c804de156
--- /dev/null
+++ b/drivers/mtd/nand/jz4740_nand.c
@@ -0,0 +1,589 @@
+/*
+ *  Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  JZ4740 SoC NAND controller driver
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/gpio.h>
+
+#include <asm/mach-jz4740/jz4740_nand.h>
+
+#define JZ_REG_NAND_CTRL	0x50
+#define JZ_REG_NAND_ECC_CTRL	0x100
+#define JZ_REG_NAND_DATA	0x104
+#define JZ_REG_NAND_PAR0	0x108
+#define JZ_REG_NAND_PAR1	0x10C
+#define JZ_REG_NAND_PAR2	0x110
+#define JZ_REG_NAND_IRQ_STAT	0x114
+#define JZ_REG_NAND_IRQ_CTRL	0x118
+#define JZ_REG_NAND_ERR(x)	(0x11C + ((x) << 2))
+
+#define JZ_NAND_ECC_CTRL_PAR_READY	BIT(4)
+#define JZ_NAND_ECC_CTRL_ENCODING	BIT(3)
+#define JZ_NAND_ECC_CTRL_RS		BIT(2)
+#define JZ_NAND_ECC_CTRL_RESET		BIT(1)
+#define JZ_NAND_ECC_CTRL_ENABLE		BIT(0)
+
+#define JZ_NAND_STATUS_ERR_COUNT	(BIT(31) | BIT(30) | BIT(29))
+#define JZ_NAND_STATUS_PAD_FINISH	BIT(4)
+#define JZ_NAND_STATUS_DEC_FINISH	BIT(3)
+#define JZ_NAND_STATUS_ENC_FINISH	BIT(2)
+#define JZ_NAND_STATUS_UNCOR_ERROR	BIT(1)
+#define JZ_NAND_STATUS_ERROR		BIT(0)
+
+#define JZ_NAND_CTRL_ENABLE_CHIP(x) BIT((x) << 1)
+#define JZ_NAND_CTRL_ASSERT_CHIP(x) BIT(((x) << 1) + 1)
+#define JZ_NAND_CTRL_ASSERT_CHIP_MASK 0xaa
+
+#define JZ_NAND_MEM_CMD_OFFSET 0x08000
+#define JZ_NAND_MEM_ADDR_OFFSET 0x10000
+
+struct jz_nand {
+	struct mtd_info mtd;
+	struct nand_chip chip;
+	void __iomem *base;
+	struct resource *mem;
+
+	unsigned char banks[JZ_NAND_NUM_BANKS];
+	void __iomem *bank_base[JZ_NAND_NUM_BANKS];
+	struct resource *bank_mem[JZ_NAND_NUM_BANKS];
+
+	int selected_bank;
+
+	struct jz_nand_platform_data *pdata;
+	bool is_reading;
+};
+
+static inline struct jz_nand *mtd_to_jz_nand(struct mtd_info *mtd)
+{
+	return container_of(mtd, struct jz_nand, mtd);
+}
+
+static void jz_nand_select_chip(struct mtd_info *mtd, int chipnr)
+{
+	struct jz_nand *nand = mtd_to_jz_nand(mtd);
+	struct nand_chip *chip = mtd->priv;
+	uint32_t ctrl;
+	int banknr;
+
+	ctrl = readl(nand->base + JZ_REG_NAND_CTRL);
+	ctrl &= ~JZ_NAND_CTRL_ASSERT_CHIP_MASK;
+
+	if (chipnr == -1) {
+		banknr = -1;
+	} else {
+		banknr = nand->banks[chipnr] - 1;
+		chip->IO_ADDR_R = nand->bank_base[banknr];
+		chip->IO_ADDR_W = nand->bank_base[banknr];
+	}
+	writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
+
+	nand->selected_bank = banknr;
+}
+
+static void jz_nand_cmd_ctrl(struct mtd_info *mtd, int dat, unsigned int ctrl)
+{
+	struct jz_nand *nand = mtd_to_jz_nand(mtd);
+	struct nand_chip *chip = mtd->priv;
+	uint32_t reg;
+	void __iomem *bank_base = nand->bank_base[nand->selected_bank];
+
+	BUG_ON(nand->selected_bank < 0);
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		BUG_ON((ctrl & NAND_ALE) && (ctrl & NAND_CLE));
+		if (ctrl & NAND_ALE)
+			bank_base += JZ_NAND_MEM_ADDR_OFFSET;
+		else if (ctrl & NAND_CLE)
+			bank_base += JZ_NAND_MEM_CMD_OFFSET;
+		chip->IO_ADDR_W = bank_base;
+
+		reg = readl(nand->base + JZ_REG_NAND_CTRL);
+		if (ctrl & NAND_NCE)
+			reg |= JZ_NAND_CTRL_ASSERT_CHIP(nand->selected_bank);
+		else
+			reg &= ~JZ_NAND_CTRL_ASSERT_CHIP(nand->selected_bank);
+		writel(reg, nand->base + JZ_REG_NAND_CTRL);
+	}
+	if (dat != NAND_CMD_NONE)
+		writeb(dat, chip->IO_ADDR_W);
+}
+
+static int jz_nand_dev_ready(struct mtd_info *mtd)
+{
+	struct jz_nand *nand = mtd_to_jz_nand(mtd);
+	return gpio_get_value_cansleep(nand->pdata->busy_gpio);
+}
+
+static void jz_nand_hwctl(struct mtd_info *mtd, int mode)
+{
+	struct jz_nand *nand = mtd_to_jz_nand(mtd);
+	uint32_t reg;
+
+	writel(0, nand->base + JZ_REG_NAND_IRQ_STAT);
+	reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
+
+	reg |= JZ_NAND_ECC_CTRL_RESET;
+	reg |= JZ_NAND_ECC_CTRL_ENABLE;
+	reg |= JZ_NAND_ECC_CTRL_RS;
+
+	switch (mode) {
+	case NAND_ECC_READ:
+		reg &= ~JZ_NAND_ECC_CTRL_ENCODING;
+		nand->is_reading = true;
+		break;
+	case NAND_ECC_WRITE:
+		reg |= JZ_NAND_ECC_CTRL_ENCODING;
+		nand->is_reading = false;
+		break;
+	default:
+		break;
+	}
+
+	writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
+}
+
+static int jz_nand_calculate_ecc_rs(struct mtd_info *mtd, const uint8_t *dat,
+	uint8_t *ecc_code)
+{
+	struct jz_nand *nand = mtd_to_jz_nand(mtd);
+	uint32_t reg, status;
+	int i;
+	unsigned int timeout = 1000;
+	static uint8_t empty_block_ecc[] = {0xcd, 0x9d, 0x90, 0x58, 0xf4,
+						0x8b, 0xff, 0xb7, 0x6f};
+
+	if (nand->is_reading)
+		return 0;
+
+	do {
+		status = readl(nand->base + JZ_REG_NAND_IRQ_STAT);
+	} while (!(status & JZ_NAND_STATUS_ENC_FINISH) && --timeout);
+
+	if (timeout == 0)
+	    return -1;
+
+	reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
+	reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
+	writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
+
+	for (i = 0; i < 9; ++i)
+		ecc_code[i] = readb(nand->base + JZ_REG_NAND_PAR0 + i);
+
+	/* If the written data is completly 0xff, we also want to write 0xff as
+	 * ecc, otherwise we will get in trouble when doing subpage writes. */
+	if (memcmp(ecc_code, empty_block_ecc, 9) == 0)
+		memset(ecc_code, 0xff, 9);
+
+	return 0;
+}
+
+static void jz_nand_correct_data(uint8_t *dat, int index, int mask)
+{
+	int offset = index & 0x7;
+	uint16_t data;
+
+	index += (index >> 3);
+
+	data = dat[index];
+	data |= dat[index+1] << 8;
+
+	mask ^= (data >> offset) & 0x1ff;
+	data &= ~(0x1ff << offset);
+	data |= (mask << offset);
+
+	dat[index] = data & 0xff;
+	dat[index+1] = (data >> 8) & 0xff;
+}
+
+static int jz_nand_correct_ecc_rs(struct mtd_info *mtd, uint8_t *dat,
+	uint8_t *read_ecc, uint8_t *calc_ecc)
+{
+	struct jz_nand *nand = mtd_to_jz_nand(mtd);
+	int i, error_count, index;
+	uint32_t reg, status, error;
+	uint32_t t;
+	unsigned int timeout = 1000;
+
+	t = read_ecc[0];
+
+	if (t == 0xff) {
+		for (i = 1; i < 9; ++i)
+			t &= read_ecc[i];
+
+		t &= dat[0];
+		t &= dat[nand->chip.ecc.size / 2];
+		t &= dat[nand->chip.ecc.size - 1];
+
+		if (t == 0xff) {
+			for (i = 1; i < nand->chip.ecc.size - 1; ++i)
+				t &= dat[i];
+			if (t == 0xff)
+				return 0;
+		}
+	}
+
+	for (i = 0; i < 9; ++i)
+		writeb(read_ecc[i], nand->base + JZ_REG_NAND_PAR0 + i);
+
+	reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
+	reg |= JZ_NAND_ECC_CTRL_PAR_READY;
+	writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
+
+	do {
+		status = readl(nand->base + JZ_REG_NAND_IRQ_STAT);
+	} while (!(status & JZ_NAND_STATUS_DEC_FINISH) && --timeout);
+
+	if (timeout == 0)
+	    return -1;
+
+	reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
+	reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
+	writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
+
+	if (status & JZ_NAND_STATUS_ERROR) {
+		if (status & JZ_NAND_STATUS_UNCOR_ERROR)
+			return -1;
+
+		error_count = (status & JZ_NAND_STATUS_ERR_COUNT) >> 29;
+
+		for (i = 0; i < error_count; ++i) {
+			error = readl(nand->base + JZ_REG_NAND_ERR(i));
+			index = ((error >> 16) & 0x1ff) - 1;
+			if (index >= 0 && index < 512)
+				jz_nand_correct_data(dat, index, error & 0x1ff);
+		}
+
+		return error_count;
+	}
+
+	return 0;
+}
+
+static int jz_nand_ioremap_resource(struct platform_device *pdev,
+	const char *name, struct resource **res, void *__iomem *base)
+{
+	int ret;
+
+	*res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
+	if (!*res) {
+		dev_err(&pdev->dev, "Failed to get platform %s memory\n", name);
+		ret = -ENXIO;
+		goto err;
+	}
+
+	*res = request_mem_region((*res)->start, resource_size(*res),
+				pdev->name);
+	if (!*res) {
+		dev_err(&pdev->dev, "Failed to request %s memory region\n", name);
+		ret = -EBUSY;
+		goto err;
+	}
+
+	*base = ioremap((*res)->start, resource_size(*res));
+	if (!*base) {
+		dev_err(&pdev->dev, "Failed to ioremap %s memory region\n", name);
+		ret = -EBUSY;
+		goto err_release_mem;
+	}
+
+	return 0;
+
+err_release_mem:
+	release_mem_region((*res)->start, resource_size(*res));
+err:
+	*res = NULL;
+	*base = NULL;
+	return ret;
+}
+
+static inline void jz_nand_iounmap_resource(struct resource *res,
+					    void __iomem *base)
+{
+	iounmap(base);
+	release_mem_region(res->start, resource_size(res));
+}
+
+static int jz_nand_detect_bank(struct platform_device *pdev,
+			       struct jz_nand *nand, unsigned char bank,
+			       size_t chipnr, uint8_t *nand_maf_id,
+			       uint8_t *nand_dev_id)
+{
+	int ret;
+	int gpio;
+	char gpio_name[9];
+	char res_name[6];
+	uint32_t ctrl;
+	struct mtd_info *mtd = &nand->mtd;
+	struct nand_chip *chip = &nand->chip;
+
+	/* Request GPIO port. */
+	gpio = JZ_GPIO_MEM_CS0 + bank - 1;
+	sprintf(gpio_name, "NAND CS%d", bank);
+	ret = gpio_request(gpio, gpio_name);
+	if (ret) {
+		dev_warn(&pdev->dev,
+			"Failed to request %s gpio %d: %d\n",
+			gpio_name, gpio, ret);
+		goto notfound_gpio;
+	}
+
+	/* Request I/O resource. */
+	sprintf(res_name, "bank%d", bank);
+	ret = jz_nand_ioremap_resource(pdev, res_name,
+					&nand->bank_mem[bank - 1],
+					&nand->bank_base[bank - 1]);
+	if (ret)
+		goto notfound_resource;
+
+	/* Enable chip in bank. */
+	jz_gpio_set_function(gpio, JZ_GPIO_FUNC_MEM_CS0);
+	ctrl = readl(nand->base + JZ_REG_NAND_CTRL);
+	ctrl |= JZ_NAND_CTRL_ENABLE_CHIP(bank - 1);
+	writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
+
+	if (chipnr == 0) {
+		/* Detect first chip. */
+		ret = nand_scan_ident(mtd, 1, NULL);
+		if (ret)
+			goto notfound_id;
+
+		/* Retrieve the IDs from the first chip. */
+		chip->select_chip(mtd, 0);
+		chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+		chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
+		*nand_maf_id = chip->read_byte(mtd);
+		*nand_dev_id = chip->read_byte(mtd);
+	} else {
+		/* Detect additional chip. */
+		chip->select_chip(mtd, chipnr);
+		chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+		chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
+		if (*nand_maf_id != chip->read_byte(mtd)
+		 || *nand_dev_id != chip->read_byte(mtd)) {
+			ret = -ENODEV;
+			goto notfound_id;
+		}
+
+		/* Update size of the MTD. */
+		chip->numchips++;
+		mtd->size += chip->chipsize;
+	}
+
+	dev_info(&pdev->dev, "Found chip %i on bank %i\n", chipnr, bank);
+	return 0;
+
+notfound_id:
+	dev_info(&pdev->dev, "No chip found on bank %i\n", bank);
+	ctrl &= ~(JZ_NAND_CTRL_ENABLE_CHIP(bank - 1));
+	writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
+	jz_gpio_set_function(gpio, JZ_GPIO_FUNC_NONE);
+	jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
+				 nand->bank_base[bank - 1]);
+notfound_resource:
+	gpio_free(gpio);
+notfound_gpio:
+	return ret;
+}
+
+static int jz_nand_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct jz_nand *nand;
+	struct nand_chip *chip;
+	struct mtd_info *mtd;
+	struct jz_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	size_t chipnr, bank_idx;
+	uint8_t nand_maf_id = 0, nand_dev_id = 0;
+
+	nand = kzalloc(sizeof(*nand), GFP_KERNEL);
+	if (!nand)
+		return -ENOMEM;
+
+	ret = jz_nand_ioremap_resource(pdev, "mmio", &nand->mem, &nand->base);
+	if (ret)
+		goto err_free;
+
+	if (pdata && gpio_is_valid(pdata->busy_gpio)) {
+		ret = gpio_request(pdata->busy_gpio, "NAND busy pin");
+		if (ret) {
+			dev_err(&pdev->dev,
+				"Failed to request busy gpio %d: %d\n",
+				pdata->busy_gpio, ret);
+			goto err_iounmap_mmio;
+		}
+	}
+
+	mtd		= &nand->mtd;
+	chip		= &nand->chip;
+	mtd->priv	= chip;
+	mtd->owner	= THIS_MODULE;
+	mtd->name	= "jz4740-nand";
+
+	chip->ecc.hwctl		= jz_nand_hwctl;
+	chip->ecc.calculate	= jz_nand_calculate_ecc_rs;
+	chip->ecc.correct	= jz_nand_correct_ecc_rs;
+	chip->ecc.mode		= NAND_ECC_HW_OOB_FIRST;
+	chip->ecc.size		= 512;
+	chip->ecc.bytes		= 9;
+	chip->ecc.strength	= 4;
+
+	if (pdata)
+		chip->ecc.layout = pdata->ecc_layout;
+
+	chip->chip_delay = 50;
+	chip->cmd_ctrl = jz_nand_cmd_ctrl;
+	chip->select_chip = jz_nand_select_chip;
+
+	if (pdata && gpio_is_valid(pdata->busy_gpio))
+		chip->dev_ready = jz_nand_dev_ready;
+
+	nand->pdata = pdata;
+	platform_set_drvdata(pdev, nand);
+
+	/* We are going to autodetect NAND chips in the banks specified in the
+	 * platform data. Although nand_scan_ident() can detect multiple chips,
+	 * it requires those chips to be numbered consecuitively, which is not
+	 * always the case for external memory banks. And a fixed chip-to-bank
+	 * mapping is not practical either, since for example Dingoo units
+	 * produced at different times have NAND chips in different banks.
+	 */
+	chipnr = 0;
+	for (bank_idx = 0; bank_idx < JZ_NAND_NUM_BANKS; bank_idx++) {
+		unsigned char bank;
+
+		/* If there is no platform data, look for NAND in bank 1,
+		 * which is the most likely bank since it is the only one
+		 * that can be booted from.
+		 */
+		bank = pdata ? pdata->banks[bank_idx] : bank_idx ^ 1;
+		if (bank == 0)
+			break;
+		if (bank > JZ_NAND_NUM_BANKS) {
+			dev_warn(&pdev->dev,
+				"Skipping non-existing bank: %d\n", bank);
+			continue;
+		}
+		/* The detection routine will directly or indirectly call
+		 * jz_nand_select_chip(), so nand->banks has to contain the
+		 * bank we're checking.
+		 */
+		nand->banks[chipnr] = bank;
+		if (jz_nand_detect_bank(pdev, nand, bank, chipnr,
+					&nand_maf_id, &nand_dev_id) == 0)
+			chipnr++;
+		else
+			nand->banks[chipnr] = 0;
+	}
+	if (chipnr == 0) {
+		dev_err(&pdev->dev, "No NAND chips found\n");
+		goto err_gpio_busy;
+	}
+
+	if (pdata && pdata->ident_callback) {
+		pdata->ident_callback(pdev, chip, &pdata->partitions,
+					&pdata->num_partitions);
+	}
+
+	ret = nand_scan_tail(mtd);
+	if (ret) {
+		dev_err(&pdev->dev,  "Failed to scan NAND\n");
+		goto err_unclaim_banks;
+	}
+
+	ret = mtd_device_parse_register(mtd, NULL, NULL,
+					pdata ? pdata->partitions : NULL,
+					pdata ? pdata->num_partitions : 0);
+
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to add mtd device\n");
+		goto err_nand_release;
+	}
+
+	dev_info(&pdev->dev, "Successfully registered JZ4740 NAND driver\n");
+
+	return 0;
+
+err_nand_release:
+	nand_release(mtd);
+err_unclaim_banks:
+	while (chipnr--) {
+		unsigned char bank = nand->banks[chipnr];
+		gpio_free(JZ_GPIO_MEM_CS0 + bank - 1);
+		jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
+					 nand->bank_base[bank - 1]);
+	}
+	writel(0, nand->base + JZ_REG_NAND_CTRL);
+err_gpio_busy:
+	if (pdata && gpio_is_valid(pdata->busy_gpio))
+		gpio_free(pdata->busy_gpio);
+err_iounmap_mmio:
+	jz_nand_iounmap_resource(nand->mem, nand->base);
+err_free:
+	kfree(nand);
+	return ret;
+}
+
+static int jz_nand_remove(struct platform_device *pdev)
+{
+	struct jz_nand *nand = platform_get_drvdata(pdev);
+	struct jz_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	size_t i;
+
+	nand_release(&nand->mtd);
+
+	/* Deassert and disable all chips */
+	writel(0, nand->base + JZ_REG_NAND_CTRL);
+
+	for (i = 0; i < JZ_NAND_NUM_BANKS; ++i) {
+		unsigned char bank = nand->banks[i];
+		if (bank != 0) {
+			jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
+						 nand->bank_base[bank - 1]);
+			gpio_free(JZ_GPIO_MEM_CS0 + bank - 1);
+		}
+	}
+	if (pdata && gpio_is_valid(pdata->busy_gpio))
+		gpio_free(pdata->busy_gpio);
+
+	jz_nand_iounmap_resource(nand->mem, nand->base);
+
+	kfree(nand);
+
+	return 0;
+}
+
+static struct platform_driver jz_nand_driver = {
+	.probe = jz_nand_probe,
+	.remove = jz_nand_remove,
+	.driver = {
+		.name = "jz4740-nand",
+		.owner = THIS_MODULE,
+	},
+};
+
+module_platform_driver(jz_nand_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("NAND controller driver for JZ4740 SoC");
+MODULE_ALIAS("platform:jz4740-nand");
diff --git a/drivers/mtd/nand/lpc32xx_mlc.c b/drivers/mtd/nand/lpc32xx_mlc.c
new file mode 100644
index 00000000000..687478c9f09
--- /dev/null
+++ b/drivers/mtd/nand/lpc32xx_mlc.c
@@ -0,0 +1,896 @@
+/*
+ * Driver for NAND MLC Controller in LPC32xx
+ *
+ * Author: Roland Stigge <stigge@antcom.de>
+ *
+ * Copyright © 2011 WORK Microwave GmbH
+ * Copyright © 2011, 2012 Roland Stigge
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * NAND Flash Controller Operation:
+ * - Read: Auto Decode
+ * - Write: Auto Encode
+ * - Tested Page Sizes: 2048, 4096
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/of_mtd.h>
+#include <linux/of_gpio.h>
+#include <linux/mtd/lpc32xx_mlc.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/mtd/nand_ecc.h>
+
+#define DRV_NAME "lpc32xx_mlc"
+
+/**********************************************************************
+* MLC NAND controller register offsets
+**********************************************************************/
+
+#define MLC_BUFF(x)			(x + 0x00000)
+#define MLC_DATA(x)			(x + 0x08000)
+#define MLC_CMD(x)			(x + 0x10000)
+#define MLC_ADDR(x)			(x + 0x10004)
+#define MLC_ECC_ENC_REG(x)		(x + 0x10008)
+#define MLC_ECC_DEC_REG(x)		(x + 0x1000C)
+#define MLC_ECC_AUTO_ENC_REG(x)		(x + 0x10010)
+#define MLC_ECC_AUTO_DEC_REG(x)		(x + 0x10014)
+#define MLC_RPR(x)			(x + 0x10018)
+#define MLC_WPR(x)			(x + 0x1001C)
+#define MLC_RUBP(x)			(x + 0x10020)
+#define MLC_ROBP(x)			(x + 0x10024)
+#define MLC_SW_WP_ADD_LOW(x)		(x + 0x10028)
+#define MLC_SW_WP_ADD_HIG(x)		(x + 0x1002C)
+#define MLC_ICR(x)			(x + 0x10030)
+#define MLC_TIME_REG(x)			(x + 0x10034)
+#define MLC_IRQ_MR(x)			(x + 0x10038)
+#define MLC_IRQ_SR(x)			(x + 0x1003C)
+#define MLC_LOCK_PR(x)			(x + 0x10044)
+#define MLC_ISR(x)			(x + 0x10048)
+#define MLC_CEH(x)			(x + 0x1004C)
+
+/**********************************************************************
+* MLC_CMD bit definitions
+**********************************************************************/
+#define MLCCMD_RESET			0xFF
+
+/**********************************************************************
+* MLC_ICR bit definitions
+**********************************************************************/
+#define MLCICR_WPROT			(1 << 3)
+#define MLCICR_LARGEBLOCK		(1 << 2)
+#define MLCICR_LONGADDR			(1 << 1)
+#define MLCICR_16BIT			(1 << 0)  /* unsupported by LPC32x0! */
+
+/**********************************************************************
+* MLC_TIME_REG bit definitions
+**********************************************************************/
+#define MLCTIMEREG_TCEA_DELAY(n)	(((n) & 0x03) << 24)
+#define MLCTIMEREG_BUSY_DELAY(n)	(((n) & 0x1F) << 19)
+#define MLCTIMEREG_NAND_TA(n)		(((n) & 0x07) << 16)
+#define MLCTIMEREG_RD_HIGH(n)		(((n) & 0x0F) << 12)
+#define MLCTIMEREG_RD_LOW(n)		(((n) & 0x0F) << 8)
+#define MLCTIMEREG_WR_HIGH(n)		(((n) & 0x0F) << 4)
+#define MLCTIMEREG_WR_LOW(n)		(((n) & 0x0F) << 0)
+
+/**********************************************************************
+* MLC_IRQ_MR and MLC_IRQ_SR bit definitions
+**********************************************************************/
+#define MLCIRQ_NAND_READY		(1 << 5)
+#define MLCIRQ_CONTROLLER_READY		(1 << 4)
+#define MLCIRQ_DECODE_FAILURE		(1 << 3)
+#define MLCIRQ_DECODE_ERROR		(1 << 2)
+#define MLCIRQ_ECC_READY		(1 << 1)
+#define MLCIRQ_WRPROT_FAULT		(1 << 0)
+
+/**********************************************************************
+* MLC_LOCK_PR bit definitions
+**********************************************************************/
+#define MLCLOCKPR_MAGIC			0xA25E
+
+/**********************************************************************
+* MLC_ISR bit definitions
+**********************************************************************/
+#define MLCISR_DECODER_FAILURE		(1 << 6)
+#define MLCISR_ERRORS			((1 << 4) | (1 << 5))
+#define MLCISR_ERRORS_DETECTED		(1 << 3)
+#define MLCISR_ECC_READY		(1 << 2)
+#define MLCISR_CONTROLLER_READY		(1 << 1)
+#define MLCISR_NAND_READY		(1 << 0)
+
+/**********************************************************************
+* MLC_CEH bit definitions
+**********************************************************************/
+#define MLCCEH_NORMAL			(1 << 0)
+
+struct lpc32xx_nand_cfg_mlc {
+	uint32_t tcea_delay;
+	uint32_t busy_delay;
+	uint32_t nand_ta;
+	uint32_t rd_high;
+	uint32_t rd_low;
+	uint32_t wr_high;
+	uint32_t wr_low;
+	int wp_gpio;
+	struct mtd_partition *parts;
+	unsigned num_parts;
+};
+
+static struct nand_ecclayout lpc32xx_nand_oob = {
+	.eccbytes = 40,
+	.eccpos = { 6,  7,  8,  9, 10, 11, 12, 13, 14, 15,
+		   22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+		   38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
+		   54, 55, 56, 57, 58, 59, 60, 61, 62, 63 },
+	.oobfree = {
+		{ .offset = 0,
+		  .length = 6, },
+		{ .offset = 16,
+		  .length = 6, },
+		{ .offset = 32,
+		  .length = 6, },
+		{ .offset = 48,
+		  .length = 6, },
+		},
+};
+
+static struct nand_bbt_descr lpc32xx_nand_bbt = {
+	.options = NAND_BBT_ABSPAGE | NAND_BBT_2BIT | NAND_BBT_NO_OOB |
+		   NAND_BBT_WRITE,
+	.pages = { 524224, 0, 0, 0, 0, 0, 0, 0 },
+};
+
+static struct nand_bbt_descr lpc32xx_nand_bbt_mirror = {
+	.options = NAND_BBT_ABSPAGE | NAND_BBT_2BIT | NAND_BBT_NO_OOB |
+		   NAND_BBT_WRITE,
+	.pages = { 524160, 0, 0, 0, 0, 0, 0, 0 },
+};
+
+struct lpc32xx_nand_host {
+	struct nand_chip	nand_chip;
+	struct lpc32xx_mlc_platform_data *pdata;
+	struct clk		*clk;
+	struct mtd_info		mtd;
+	void __iomem		*io_base;
+	int			irq;
+	struct lpc32xx_nand_cfg_mlc	*ncfg;
+	struct completion       comp_nand;
+	struct completion       comp_controller;
+	uint32_t llptr;
+	/*
+	 * Physical addresses of ECC buffer, DMA data buffers, OOB data buffer
+	 */
+	dma_addr_t		oob_buf_phy;
+	/*
+	 * Virtual addresses of ECC buffer, DMA data buffers, OOB data buffer
+	 */
+	uint8_t			*oob_buf;
+	/* Physical address of DMA base address */
+	dma_addr_t		io_base_phy;
+
+	struct completion	comp_dma;
+	struct dma_chan		*dma_chan;
+	struct dma_slave_config	dma_slave_config;
+	struct scatterlist	sgl;
+	uint8_t			*dma_buf;
+	uint8_t			*dummy_buf;
+	int			mlcsubpages; /* number of 512bytes-subpages */
+};
+
+/*
+ * Activate/Deactivate DMA Operation:
+ *
+ * Using the PL080 DMA Controller for transferring the 512 byte subpages
+ * instead of doing readl() / writel() in a loop slows it down significantly.
+ * Measurements via getnstimeofday() upon 512 byte subpage reads reveal:
+ *
+ * - readl() of 128 x 32 bits in a loop: ~20us
+ * - DMA read of 512 bytes (32 bit, 4...128 words bursts): ~60us
+ * - DMA read of 512 bytes (32 bit, no bursts): ~100us
+ *
+ * This applies to the transfer itself. In the DMA case: only the
+ * wait_for_completion() (DMA setup _not_ included).
+ *
+ * Note that the 512 bytes subpage transfer is done directly from/to a
+ * FIFO/buffer inside the NAND controller. Most of the time (~400-800us for a
+ * 2048 bytes page) is spent waiting for the NAND IRQ, anyway. (The NAND
+ * controller transferring data between its internal buffer to/from the NAND
+ * chip.)
+ *
+ * Therefore, using the PL080 DMA is disabled by default, for now.
+ *
+ */
+static int use_dma;
+
+static void lpc32xx_nand_setup(struct lpc32xx_nand_host *host)
+{
+	uint32_t clkrate, tmp;
+
+	/* Reset MLC controller */
+	writel(MLCCMD_RESET, MLC_CMD(host->io_base));
+	udelay(1000);
+
+	/* Get base clock for MLC block */
+	clkrate = clk_get_rate(host->clk);
+	if (clkrate == 0)
+		clkrate = 104000000;
+
+	/* Unlock MLC_ICR
+	 * (among others, will be locked again automatically) */
+	writew(MLCLOCKPR_MAGIC, MLC_LOCK_PR(host->io_base));
+
+	/* Configure MLC Controller: Large Block, 5 Byte Address */
+	tmp = MLCICR_LARGEBLOCK | MLCICR_LONGADDR;
+	writel(tmp, MLC_ICR(host->io_base));
+
+	/* Unlock MLC_TIME_REG
+	 * (among others, will be locked again automatically) */
+	writew(MLCLOCKPR_MAGIC, MLC_LOCK_PR(host->io_base));
+
+	/* Compute clock setup values, see LPC and NAND manual */
+	tmp = 0;
+	tmp |= MLCTIMEREG_TCEA_DELAY(clkrate / host->ncfg->tcea_delay + 1);
+	tmp |= MLCTIMEREG_BUSY_DELAY(clkrate / host->ncfg->busy_delay + 1);
+	tmp |= MLCTIMEREG_NAND_TA(clkrate / host->ncfg->nand_ta + 1);
+	tmp |= MLCTIMEREG_RD_HIGH(clkrate / host->ncfg->rd_high + 1);
+	tmp |= MLCTIMEREG_RD_LOW(clkrate / host->ncfg->rd_low);
+	tmp |= MLCTIMEREG_WR_HIGH(clkrate / host->ncfg->wr_high + 1);
+	tmp |= MLCTIMEREG_WR_LOW(clkrate / host->ncfg->wr_low);
+	writel(tmp, MLC_TIME_REG(host->io_base));
+
+	/* Enable IRQ for CONTROLLER_READY and NAND_READY */
+	writeb(MLCIRQ_CONTROLLER_READY | MLCIRQ_NAND_READY,
+			MLC_IRQ_MR(host->io_base));
+
+	/* Normal nCE operation: nCE controlled by controller */
+	writel(MLCCEH_NORMAL, MLC_CEH(host->io_base));
+}
+
+/*
+ * Hardware specific access to control lines
+ */
+static void lpc32xx_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+				  unsigned int ctrl)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct lpc32xx_nand_host *host = nand_chip->priv;
+
+	if (cmd != NAND_CMD_NONE) {
+		if (ctrl & NAND_CLE)
+			writel(cmd, MLC_CMD(host->io_base));
+		else
+			writel(cmd, MLC_ADDR(host->io_base));
+	}
+}
+
+/*
+ * Read Device Ready (NAND device _and_ controller ready)
+ */
+static int lpc32xx_nand_device_ready(struct mtd_info *mtd)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct lpc32xx_nand_host *host = nand_chip->priv;
+
+	if ((readb(MLC_ISR(host->io_base)) &
+	     (MLCISR_CONTROLLER_READY | MLCISR_NAND_READY)) ==
+	    (MLCISR_CONTROLLER_READY | MLCISR_NAND_READY))
+		return  1;
+
+	return 0;
+}
+
+static irqreturn_t lpc3xxx_nand_irq(int irq, struct lpc32xx_nand_host *host)
+{
+	uint8_t sr;
+
+	/* Clear interrupt flag by reading status */
+	sr = readb(MLC_IRQ_SR(host->io_base));
+	if (sr & MLCIRQ_NAND_READY)
+		complete(&host->comp_nand);
+	if (sr & MLCIRQ_CONTROLLER_READY)
+		complete(&host->comp_controller);
+
+	return IRQ_HANDLED;
+}
+
+static int lpc32xx_waitfunc_nand(struct mtd_info *mtd, struct nand_chip *chip)
+{
+	struct lpc32xx_nand_host *host = chip->priv;
+
+	if (readb(MLC_ISR(host->io_base)) & MLCISR_NAND_READY)
+		goto exit;
+
+	wait_for_completion(&host->comp_nand);
+
+	while (!(readb(MLC_ISR(host->io_base)) & MLCISR_NAND_READY)) {
+		/* Seems to be delayed sometimes by controller */
+		dev_dbg(&mtd->dev, "Warning: NAND not ready.\n");
+		cpu_relax();
+	}
+
+exit:
+	return NAND_STATUS_READY;
+}
+
+static int lpc32xx_waitfunc_controller(struct mtd_info *mtd,
+				       struct nand_chip *chip)
+{
+	struct lpc32xx_nand_host *host = chip->priv;
+
+	if (readb(MLC_ISR(host->io_base)) & MLCISR_CONTROLLER_READY)
+		goto exit;
+
+	wait_for_completion(&host->comp_controller);
+
+	while (!(readb(MLC_ISR(host->io_base)) &
+		 MLCISR_CONTROLLER_READY)) {
+		dev_dbg(&mtd->dev, "Warning: Controller not ready.\n");
+		cpu_relax();
+	}
+
+exit:
+	return NAND_STATUS_READY;
+}
+
+static int lpc32xx_waitfunc(struct mtd_info *mtd, struct nand_chip *chip)
+{
+	lpc32xx_waitfunc_nand(mtd, chip);
+	lpc32xx_waitfunc_controller(mtd, chip);
+
+	return NAND_STATUS_READY;
+}
+
+/*
+ * Enable NAND write protect
+ */
+static void lpc32xx_wp_enable(struct lpc32xx_nand_host *host)
+{
+	if (gpio_is_valid(host->ncfg->wp_gpio))
+		gpio_set_value(host->ncfg->wp_gpio, 0);
+}
+
+/*
+ * Disable NAND write protect
+ */
+static void lpc32xx_wp_disable(struct lpc32xx_nand_host *host)
+{
+	if (gpio_is_valid(host->ncfg->wp_gpio))
+		gpio_set_value(host->ncfg->wp_gpio, 1);
+}
+
+static void lpc32xx_dma_complete_func(void *completion)
+{
+	complete(completion);
+}
+
+static int lpc32xx_xmit_dma(struct mtd_info *mtd, void *mem, int len,
+			    enum dma_transfer_direction dir)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct lpc32xx_nand_host *host = chip->priv;
+	struct dma_async_tx_descriptor *desc;
+	int flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
+	int res;
+
+	sg_init_one(&host->sgl, mem, len);
+
+	res = dma_map_sg(host->dma_chan->device->dev, &host->sgl, 1,
+			 DMA_BIDIRECTIONAL);
+	if (res != 1) {
+		dev_err(mtd->dev.parent, "Failed to map sg list\n");
+		return -ENXIO;
+	}
+	desc = dmaengine_prep_slave_sg(host->dma_chan, &host->sgl, 1, dir,
+				       flags);
+	if (!desc) {
+		dev_err(mtd->dev.parent, "Failed to prepare slave sg\n");
+		goto out1;
+	}
+
+	init_completion(&host->comp_dma);
+	desc->callback = lpc32xx_dma_complete_func;
+	desc->callback_param = &host->comp_dma;
+
+	dmaengine_submit(desc);
+	dma_async_issue_pending(host->dma_chan);
+
+	wait_for_completion_timeout(&host->comp_dma, msecs_to_jiffies(1000));
+
+	dma_unmap_sg(host->dma_chan->device->dev, &host->sgl, 1,
+		     DMA_BIDIRECTIONAL);
+	return 0;
+out1:
+	dma_unmap_sg(host->dma_chan->device->dev, &host->sgl, 1,
+		     DMA_BIDIRECTIONAL);
+	return -ENXIO;
+}
+
+static int lpc32xx_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+			     uint8_t *buf, int oob_required, int page)
+{
+	struct lpc32xx_nand_host *host = chip->priv;
+	int i, j;
+	uint8_t *oobbuf = chip->oob_poi;
+	uint32_t mlc_isr;
+	int res;
+	uint8_t *dma_buf;
+	bool dma_mapped;
+
+	if ((void *)buf <= high_memory) {
+		dma_buf = buf;
+		dma_mapped = true;
+	} else {
+		dma_buf = host->dma_buf;
+		dma_mapped = false;
+	}
+
+	/* Writing Command and Address */
+	chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+
+	/* For all sub-pages */
+	for (i = 0; i < host->mlcsubpages; i++) {
+		/* Start Auto Decode Command */
+		writeb(0x00, MLC_ECC_AUTO_DEC_REG(host->io_base));
+
+		/* Wait for Controller Ready */
+		lpc32xx_waitfunc_controller(mtd, chip);
+
+		/* Check ECC Error status */
+		mlc_isr = readl(MLC_ISR(host->io_base));
+		if (mlc_isr & MLCISR_DECODER_FAILURE) {
+			mtd->ecc_stats.failed++;
+			dev_warn(&mtd->dev, "%s: DECODER_FAILURE\n", __func__);
+		} else if (mlc_isr & MLCISR_ERRORS_DETECTED) {
+			mtd->ecc_stats.corrected += ((mlc_isr >> 4) & 0x3) + 1;
+		}
+
+		/* Read 512 + 16 Bytes */
+		if (use_dma) {
+			res = lpc32xx_xmit_dma(mtd, dma_buf + i * 512, 512,
+					       DMA_DEV_TO_MEM);
+			if (res)
+				return res;
+		} else {
+			for (j = 0; j < (512 >> 2); j++) {
+				*((uint32_t *)(buf)) =
+					readl(MLC_BUFF(host->io_base));
+				buf += 4;
+			}
+		}
+		for (j = 0; j < (16 >> 2); j++) {
+			*((uint32_t *)(oobbuf)) =
+				readl(MLC_BUFF(host->io_base));
+			oobbuf += 4;
+		}
+	}
+
+	if (use_dma && !dma_mapped)
+		memcpy(buf, dma_buf, mtd->writesize);
+
+	return 0;
+}
+
+static int lpc32xx_write_page_lowlevel(struct mtd_info *mtd,
+				       struct nand_chip *chip,
+				       const uint8_t *buf, int oob_required)
+{
+	struct lpc32xx_nand_host *host = chip->priv;
+	const uint8_t *oobbuf = chip->oob_poi;
+	uint8_t *dma_buf = (uint8_t *)buf;
+	int res;
+	int i, j;
+
+	if (use_dma && (void *)buf >= high_memory) {
+		dma_buf = host->dma_buf;
+		memcpy(dma_buf, buf, mtd->writesize);
+	}
+
+	for (i = 0; i < host->mlcsubpages; i++) {
+		/* Start Encode */
+		writeb(0x00, MLC_ECC_ENC_REG(host->io_base));
+
+		/* Write 512 + 6 Bytes to Buffer */
+		if (use_dma) {
+			res = lpc32xx_xmit_dma(mtd, dma_buf + i * 512, 512,
+					       DMA_MEM_TO_DEV);
+			if (res)
+				return res;
+		} else {
+			for (j = 0; j < (512 >> 2); j++) {
+				writel(*((uint32_t *)(buf)),
+				       MLC_BUFF(host->io_base));
+				buf += 4;
+			}
+		}
+		writel(*((uint32_t *)(oobbuf)), MLC_BUFF(host->io_base));
+		oobbuf += 4;
+		writew(*((uint16_t *)(oobbuf)), MLC_BUFF(host->io_base));
+		oobbuf += 12;
+
+		/* Auto Encode w/ Bit 8 = 0 (see LPC MLC Controller manual) */
+		writeb(0x00, MLC_ECC_AUTO_ENC_REG(host->io_base));
+
+		/* Wait for Controller Ready */
+		lpc32xx_waitfunc_controller(mtd, chip);
+	}
+	return 0;
+}
+
+static int lpc32xx_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
+			    int page)
+{
+	struct lpc32xx_nand_host *host = chip->priv;
+
+	/* Read whole page - necessary with MLC controller! */
+	lpc32xx_read_page(mtd, chip, host->dummy_buf, 1, page);
+
+	return 0;
+}
+
+static int lpc32xx_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
+			      int page)
+{
+	/* None, write_oob conflicts with the automatic LPC MLC ECC decoder! */
+	return 0;
+}
+
+/* Prepares MLC for transfers with H/W ECC enabled: always enabled anyway */
+static void lpc32xx_ecc_enable(struct mtd_info *mtd, int mode)
+{
+	/* Always enabled! */
+}
+
+static int lpc32xx_dma_setup(struct lpc32xx_nand_host *host)
+{
+	struct mtd_info *mtd = &host->mtd;
+	dma_cap_mask_t mask;
+
+	if (!host->pdata || !host->pdata->dma_filter) {
+		dev_err(mtd->dev.parent, "no DMA platform data\n");
+		return -ENOENT;
+	}
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+	host->dma_chan = dma_request_channel(mask, host->pdata->dma_filter,
+					     "nand-mlc");
+	if (!host->dma_chan) {
+		dev_err(mtd->dev.parent, "Failed to request DMA channel\n");
+		return -EBUSY;
+	}
+
+	/*
+	 * Set direction to a sensible value even if the dmaengine driver
+	 * should ignore it. With the default (DMA_MEM_TO_MEM), the amba-pl08x
+	 * driver criticizes it as "alien transfer direction".
+	 */
+	host->dma_slave_config.direction = DMA_DEV_TO_MEM;
+	host->dma_slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	host->dma_slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	host->dma_slave_config.src_maxburst = 128;
+	host->dma_slave_config.dst_maxburst = 128;
+	/* DMA controller does flow control: */
+	host->dma_slave_config.device_fc = false;
+	host->dma_slave_config.src_addr = MLC_BUFF(host->io_base_phy);
+	host->dma_slave_config.dst_addr = MLC_BUFF(host->io_base_phy);
+	if (dmaengine_slave_config(host->dma_chan, &host->dma_slave_config)) {
+		dev_err(mtd->dev.parent, "Failed to setup DMA slave\n");
+		goto out1;
+	}
+
+	return 0;
+out1:
+	dma_release_channel(host->dma_chan);
+	return -ENXIO;
+}
+
+static struct lpc32xx_nand_cfg_mlc *lpc32xx_parse_dt(struct device *dev)
+{
+	struct lpc32xx_nand_cfg_mlc *ncfg;
+	struct device_node *np = dev->of_node;
+
+	ncfg = devm_kzalloc(dev, sizeof(*ncfg), GFP_KERNEL);
+	if (!ncfg)
+		return NULL;
+
+	of_property_read_u32(np, "nxp,tcea-delay", &ncfg->tcea_delay);
+	of_property_read_u32(np, "nxp,busy-delay", &ncfg->busy_delay);
+	of_property_read_u32(np, "nxp,nand-ta", &ncfg->nand_ta);
+	of_property_read_u32(np, "nxp,rd-high", &ncfg->rd_high);
+	of_property_read_u32(np, "nxp,rd-low", &ncfg->rd_low);
+	of_property_read_u32(np, "nxp,wr-high", &ncfg->wr_high);
+	of_property_read_u32(np, "nxp,wr-low", &ncfg->wr_low);
+
+	if (!ncfg->tcea_delay || !ncfg->busy_delay || !ncfg->nand_ta ||
+	    !ncfg->rd_high || !ncfg->rd_low || !ncfg->wr_high ||
+	    !ncfg->wr_low) {
+		dev_err(dev, "chip parameters not specified correctly\n");
+		return NULL;
+	}
+
+	ncfg->wp_gpio = of_get_named_gpio(np, "gpios", 0);
+
+	return ncfg;
+}
+
+/*
+ * Probe for NAND controller
+ */
+static int lpc32xx_nand_probe(struct platform_device *pdev)
+{
+	struct lpc32xx_nand_host *host;
+	struct mtd_info *mtd;
+	struct nand_chip *nand_chip;
+	struct resource *rc;
+	int res;
+	struct mtd_part_parser_data ppdata = {};
+
+	/* Allocate memory for the device structure (and zero it) */
+	host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
+	if (!host)
+		return -ENOMEM;
+
+	rc = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	host->io_base = devm_ioremap_resource(&pdev->dev, rc);
+	if (IS_ERR(host->io_base))
+		return PTR_ERR(host->io_base);
+	
+	host->io_base_phy = rc->start;
+
+	mtd = &host->mtd;
+	nand_chip = &host->nand_chip;
+	if (pdev->dev.of_node)
+		host->ncfg = lpc32xx_parse_dt(&pdev->dev);
+	if (!host->ncfg) {
+		dev_err(&pdev->dev,
+			"Missing or bad NAND config from device tree\n");
+		return -ENOENT;
+	}
+	if (host->ncfg->wp_gpio == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+	if (gpio_is_valid(host->ncfg->wp_gpio) &&
+			gpio_request(host->ncfg->wp_gpio, "NAND WP")) {
+		dev_err(&pdev->dev, "GPIO not available\n");
+		return -EBUSY;
+	}
+	lpc32xx_wp_disable(host);
+
+	host->pdata = dev_get_platdata(&pdev->dev);
+
+	nand_chip->priv = host;		/* link the private data structures */
+	mtd->priv = nand_chip;
+	mtd->owner = THIS_MODULE;
+	mtd->dev.parent = &pdev->dev;
+
+	/* Get NAND clock */
+	host->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(host->clk)) {
+		dev_err(&pdev->dev, "Clock initialization failure\n");
+		res = -ENOENT;
+		goto err_exit1;
+	}
+	clk_enable(host->clk);
+
+	nand_chip->cmd_ctrl = lpc32xx_nand_cmd_ctrl;
+	nand_chip->dev_ready = lpc32xx_nand_device_ready;
+	nand_chip->chip_delay = 25; /* us */
+	nand_chip->IO_ADDR_R = MLC_DATA(host->io_base);
+	nand_chip->IO_ADDR_W = MLC_DATA(host->io_base);
+
+	/* Init NAND controller */
+	lpc32xx_nand_setup(host);
+
+	platform_set_drvdata(pdev, host);
+
+	/* Initialize function pointers */
+	nand_chip->ecc.hwctl = lpc32xx_ecc_enable;
+	nand_chip->ecc.read_page_raw = lpc32xx_read_page;
+	nand_chip->ecc.read_page = lpc32xx_read_page;
+	nand_chip->ecc.write_page_raw = lpc32xx_write_page_lowlevel;
+	nand_chip->ecc.write_page = lpc32xx_write_page_lowlevel;
+	nand_chip->ecc.write_oob = lpc32xx_write_oob;
+	nand_chip->ecc.read_oob = lpc32xx_read_oob;
+	nand_chip->ecc.strength = 4;
+	nand_chip->waitfunc = lpc32xx_waitfunc;
+
+	nand_chip->options = NAND_NO_SUBPAGE_WRITE;
+	nand_chip->bbt_options = NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB;
+	nand_chip->bbt_td = &lpc32xx_nand_bbt;
+	nand_chip->bbt_md = &lpc32xx_nand_bbt_mirror;
+
+	/* bitflip_threshold's default is defined as ecc_strength anyway.
+	 * Unfortunately, it is set only later at add_mtd_device(). Meanwhile
+	 * being 0, it causes bad block table scanning errors in
+	 * nand_scan_tail(), so preparing it here. */
+	mtd->bitflip_threshold = nand_chip->ecc.strength;
+
+	if (use_dma) {
+		res = lpc32xx_dma_setup(host);
+		if (res) {
+			res = -EIO;
+			goto err_exit2;
+		}
+	}
+
+	/*
+	 * Scan to find existance of the device and
+	 * Get the type of NAND device SMALL block or LARGE block
+	 */
+	if (nand_scan_ident(mtd, 1, NULL)) {
+		res = -ENXIO;
+		goto err_exit3;
+	}
+
+	host->dma_buf = devm_kzalloc(&pdev->dev, mtd->writesize, GFP_KERNEL);
+	if (!host->dma_buf) {
+		res = -ENOMEM;
+		goto err_exit3;
+	}
+
+	host->dummy_buf = devm_kzalloc(&pdev->dev, mtd->writesize, GFP_KERNEL);
+	if (!host->dummy_buf) {
+		res = -ENOMEM;
+		goto err_exit3;
+	}
+
+	nand_chip->ecc.mode = NAND_ECC_HW;
+	nand_chip->ecc.size = mtd->writesize;
+	nand_chip->ecc.layout = &lpc32xx_nand_oob;
+	host->mlcsubpages = mtd->writesize / 512;
+
+	/* initially clear interrupt status */
+	readb(MLC_IRQ_SR(host->io_base));
+
+	init_completion(&host->comp_nand);
+	init_completion(&host->comp_controller);
+
+	host->irq = platform_get_irq(pdev, 0);
+	if ((host->irq < 0) || (host->irq >= NR_IRQS)) {
+		dev_err(&pdev->dev, "failed to get platform irq\n");
+		res = -EINVAL;
+		goto err_exit3;
+	}
+
+	if (request_irq(host->irq, (irq_handler_t)&lpc3xxx_nand_irq,
+			IRQF_TRIGGER_HIGH, DRV_NAME, host)) {
+		dev_err(&pdev->dev, "Error requesting NAND IRQ\n");
+		res = -ENXIO;
+		goto err_exit3;
+	}
+
+	/*
+	 * Fills out all the uninitialized function pointers with the defaults
+	 * And scans for a bad block table if appropriate.
+	 */
+	if (nand_scan_tail(mtd)) {
+		res = -ENXIO;
+		goto err_exit4;
+	}
+
+	mtd->name = DRV_NAME;
+
+	ppdata.of_node = pdev->dev.of_node;
+	res = mtd_device_parse_register(mtd, NULL, &ppdata, host->ncfg->parts,
+					host->ncfg->num_parts);
+	if (!res)
+		return res;
+
+	nand_release(mtd);
+
+err_exit4:
+	free_irq(host->irq, host);
+err_exit3:
+	if (use_dma)
+		dma_release_channel(host->dma_chan);
+err_exit2:
+	clk_disable(host->clk);
+	clk_put(host->clk);
+err_exit1:
+	lpc32xx_wp_enable(host);
+	gpio_free(host->ncfg->wp_gpio);
+
+	return res;
+}
+
+/*
+ * Remove NAND device
+ */
+static int lpc32xx_nand_remove(struct platform_device *pdev)
+{
+	struct lpc32xx_nand_host *host = platform_get_drvdata(pdev);
+	struct mtd_info *mtd = &host->mtd;
+
+	nand_release(mtd);
+	free_irq(host->irq, host);
+	if (use_dma)
+		dma_release_channel(host->dma_chan);
+
+	clk_disable(host->clk);
+	clk_put(host->clk);
+
+	lpc32xx_wp_enable(host);
+	gpio_free(host->ncfg->wp_gpio);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int lpc32xx_nand_resume(struct platform_device *pdev)
+{
+	struct lpc32xx_nand_host *host = platform_get_drvdata(pdev);
+
+	/* Re-enable NAND clock */
+	clk_enable(host->clk);
+
+	/* Fresh init of NAND controller */
+	lpc32xx_nand_setup(host);
+
+	/* Disable write protect */
+	lpc32xx_wp_disable(host);
+
+	return 0;
+}
+
+static int lpc32xx_nand_suspend(struct platform_device *pdev, pm_message_t pm)
+{
+	struct lpc32xx_nand_host *host = platform_get_drvdata(pdev);
+
+	/* Enable write protect for safety */
+	lpc32xx_wp_enable(host);
+
+	/* Disable clock */
+	clk_disable(host->clk);
+	return 0;
+}
+
+#else
+#define lpc32xx_nand_resume NULL
+#define lpc32xx_nand_suspend NULL
+#endif
+
+static const struct of_device_id lpc32xx_nand_match[] = {
+	{ .compatible = "nxp,lpc3220-mlc" },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, lpc32xx_nand_match);
+
+static struct platform_driver lpc32xx_nand_driver = {
+	.probe		= lpc32xx_nand_probe,
+	.remove		= lpc32xx_nand_remove,
+	.resume		= lpc32xx_nand_resume,
+	.suspend	= lpc32xx_nand_suspend,
+	.driver		= {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+		.of_match_table = lpc32xx_nand_match,
+	},
+};
+
+module_platform_driver(lpc32xx_nand_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
+MODULE_DESCRIPTION("NAND driver for the NXP LPC32XX MLC controller");
diff --git a/drivers/mtd/nand/lpc32xx_slc.c b/drivers/mtd/nand/lpc32xx_slc.c
new file mode 100644
index 00000000000..53a6742e3da
--- /dev/null
+++ b/drivers/mtd/nand/lpc32xx_slc.c
@@ -0,0 +1,1018 @@
+/*
+ * NXP LPC32XX NAND SLC driver
+ *
+ * Authors:
+ *    Kevin Wells <kevin.wells@nxp.com>
+ *    Roland Stigge <stigge@antcom.de>
+ *
+ * Copyright © 2011 NXP Semiconductors
+ * Copyright © 2012 Roland Stigge
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_mtd.h>
+#include <linux/of_gpio.h>
+#include <linux/mtd/lpc32xx_slc.h>
+
+#define LPC32XX_MODNAME		"lpc32xx-nand"
+
+/**********************************************************************
+* SLC NAND controller register offsets
+**********************************************************************/
+
+#define SLC_DATA(x)		(x + 0x000)
+#define SLC_ADDR(x)		(x + 0x004)
+#define SLC_CMD(x)		(x + 0x008)
+#define SLC_STOP(x)		(x + 0x00C)
+#define SLC_CTRL(x)		(x + 0x010)
+#define SLC_CFG(x)		(x + 0x014)
+#define SLC_STAT(x)		(x + 0x018)
+#define SLC_INT_STAT(x)		(x + 0x01C)
+#define SLC_IEN(x)		(x + 0x020)
+#define SLC_ISR(x)		(x + 0x024)
+#define SLC_ICR(x)		(x + 0x028)
+#define SLC_TAC(x)		(x + 0x02C)
+#define SLC_TC(x)		(x + 0x030)
+#define SLC_ECC(x)		(x + 0x034)
+#define SLC_DMA_DATA(x)		(x + 0x038)
+
+/**********************************************************************
+* slc_ctrl register definitions
+**********************************************************************/
+#define SLCCTRL_SW_RESET	(1 << 2) /* Reset the NAND controller bit */
+#define SLCCTRL_ECC_CLEAR	(1 << 1) /* Reset ECC bit */
+#define SLCCTRL_DMA_START	(1 << 0) /* Start DMA channel bit */
+
+/**********************************************************************
+* slc_cfg register definitions
+**********************************************************************/
+#define SLCCFG_CE_LOW		(1 << 5) /* Force CE low bit */
+#define SLCCFG_DMA_ECC		(1 << 4) /* Enable DMA ECC bit */
+#define SLCCFG_ECC_EN		(1 << 3) /* ECC enable bit */
+#define SLCCFG_DMA_BURST	(1 << 2) /* DMA burst bit */
+#define SLCCFG_DMA_DIR		(1 << 1) /* DMA write(0)/read(1) bit */
+#define SLCCFG_WIDTH		(1 << 0) /* External device width, 0=8bit */
+
+/**********************************************************************
+* slc_stat register definitions
+**********************************************************************/
+#define SLCSTAT_DMA_FIFO	(1 << 2) /* DMA FIFO has data bit */
+#define SLCSTAT_SLC_FIFO	(1 << 1) /* SLC FIFO has data bit */
+#define SLCSTAT_NAND_READY	(1 << 0) /* NAND device is ready bit */
+
+/**********************************************************************
+* slc_int_stat, slc_ien, slc_isr, and slc_icr register definitions
+**********************************************************************/
+#define SLCSTAT_INT_TC		(1 << 1) /* Transfer count bit */
+#define SLCSTAT_INT_RDY_EN	(1 << 0) /* Ready interrupt bit */
+
+/**********************************************************************
+* slc_tac register definitions
+**********************************************************************/
+/* Clock setting for RDY write sample wait time in 2*n clocks */
+#define SLCTAC_WDR(n)		(((n) & 0xF) << 28)
+/* Write pulse width in clock cycles, 1 to 16 clocks */
+#define SLCTAC_WWIDTH(n)	(((n) & 0xF) << 24)
+/* Write hold time of control and data signals, 1 to 16 clocks */
+#define SLCTAC_WHOLD(n)		(((n) & 0xF) << 20)
+/* Write setup time of control and data signals, 1 to 16 clocks */
+#define SLCTAC_WSETUP(n)	(((n) & 0xF) << 16)
+/* Clock setting for RDY read sample wait time in 2*n clocks */
+#define SLCTAC_RDR(n)		(((n) & 0xF) << 12)
+/* Read pulse width in clock cycles, 1 to 16 clocks */
+#define SLCTAC_RWIDTH(n)	(((n) & 0xF) << 8)
+/* Read hold time of control and data signals, 1 to 16 clocks */
+#define SLCTAC_RHOLD(n)		(((n) & 0xF) << 4)
+/* Read setup time of control and data signals, 1 to 16 clocks */
+#define SLCTAC_RSETUP(n)	(((n) & 0xF) << 0)
+
+/**********************************************************************
+* slc_ecc register definitions
+**********************************************************************/
+/* ECC line party fetch macro */
+#define SLCECC_TO_LINEPAR(n)	(((n) >> 6) & 0x7FFF)
+#define SLCECC_TO_COLPAR(n)	((n) & 0x3F)
+
+/*
+ * DMA requires storage space for the DMA local buffer and the hardware ECC
+ * storage area. The DMA local buffer is only used if DMA mapping fails
+ * during runtime.
+ */
+#define LPC32XX_DMA_DATA_SIZE		4096
+#define LPC32XX_ECC_SAVE_SIZE		((4096 / 256) * 4)
+
+/* Number of bytes used for ECC stored in NAND per 256 bytes */
+#define LPC32XX_SLC_DEV_ECC_BYTES	3
+
+/*
+ * If the NAND base clock frequency can't be fetched, this frequency will be
+ * used instead as the base. This rate is used to setup the timing registers
+ * used for NAND accesses.
+ */
+#define LPC32XX_DEF_BUS_RATE		133250000
+
+/* Milliseconds for DMA FIFO timeout (unlikely anyway) */
+#define LPC32XX_DMA_TIMEOUT		100
+
+/*
+ * NAND ECC Layout for small page NAND devices
+ * Note: For large and huge page devices, the default layouts are used
+ */
+static struct nand_ecclayout lpc32xx_nand_oob_16 = {
+	.eccbytes = 6,
+	.eccpos = {10, 11, 12, 13, 14, 15},
+	.oobfree = {
+		{ .offset = 0, .length = 4 },
+		{ .offset = 6, .length = 4 },
+	},
+};
+
+static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
+static u8 mirror_pattern[] = {'1', 't', 'b', 'B' };
+
+/*
+ * Small page FLASH BBT descriptors, marker at offset 0, version at offset 6
+ * Note: Large page devices used the default layout
+ */
+static struct nand_bbt_descr bbt_smallpage_main_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+		| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+	.offs =	0,
+	.len = 4,
+	.veroffs = 6,
+	.maxblocks = 4,
+	.pattern = bbt_pattern
+};
+
+static struct nand_bbt_descr bbt_smallpage_mirror_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+		| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+	.offs =	0,
+	.len = 4,
+	.veroffs = 6,
+	.maxblocks = 4,
+	.pattern = mirror_pattern
+};
+
+/*
+ * NAND platform configuration structure
+ */
+struct lpc32xx_nand_cfg_slc {
+	uint32_t wdr_clks;
+	uint32_t wwidth;
+	uint32_t whold;
+	uint32_t wsetup;
+	uint32_t rdr_clks;
+	uint32_t rwidth;
+	uint32_t rhold;
+	uint32_t rsetup;
+	bool use_bbt;
+	int wp_gpio;
+	struct mtd_partition *parts;
+	unsigned num_parts;
+};
+
+struct lpc32xx_nand_host {
+	struct nand_chip	nand_chip;
+	struct lpc32xx_slc_platform_data *pdata;
+	struct clk		*clk;
+	struct mtd_info		mtd;
+	void __iomem		*io_base;
+	struct lpc32xx_nand_cfg_slc *ncfg;
+
+	struct completion	comp;
+	struct dma_chan		*dma_chan;
+	uint32_t		dma_buf_len;
+	struct dma_slave_config	dma_slave_config;
+	struct scatterlist	sgl;
+
+	/*
+	 * DMA and CPU addresses of ECC work area and data buffer
+	 */
+	uint32_t		*ecc_buf;
+	uint8_t			*data_buf;
+	dma_addr_t		io_base_dma;
+};
+
+static void lpc32xx_nand_setup(struct lpc32xx_nand_host *host)
+{
+	uint32_t clkrate, tmp;
+
+	/* Reset SLC controller */
+	writel(SLCCTRL_SW_RESET, SLC_CTRL(host->io_base));
+	udelay(1000);
+
+	/* Basic setup */
+	writel(0, SLC_CFG(host->io_base));
+	writel(0, SLC_IEN(host->io_base));
+	writel((SLCSTAT_INT_TC | SLCSTAT_INT_RDY_EN),
+		SLC_ICR(host->io_base));
+
+	/* Get base clock for SLC block */
+	clkrate = clk_get_rate(host->clk);
+	if (clkrate == 0)
+		clkrate = LPC32XX_DEF_BUS_RATE;
+
+	/* Compute clock setup values */
+	tmp = SLCTAC_WDR(host->ncfg->wdr_clks) |
+		SLCTAC_WWIDTH(1 + (clkrate / host->ncfg->wwidth)) |
+		SLCTAC_WHOLD(1 + (clkrate / host->ncfg->whold)) |
+		SLCTAC_WSETUP(1 + (clkrate / host->ncfg->wsetup)) |
+		SLCTAC_RDR(host->ncfg->rdr_clks) |
+		SLCTAC_RWIDTH(1 + (clkrate / host->ncfg->rwidth)) |
+		SLCTAC_RHOLD(1 + (clkrate / host->ncfg->rhold)) |
+		SLCTAC_RSETUP(1 + (clkrate / host->ncfg->rsetup));
+	writel(tmp, SLC_TAC(host->io_base));
+}
+
+/*
+ * Hardware specific access to control lines
+ */
+static void lpc32xx_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+	unsigned int ctrl)
+{
+	uint32_t tmp;
+	struct nand_chip *chip = mtd->priv;
+	struct lpc32xx_nand_host *host = chip->priv;
+
+	/* Does CE state need to be changed? */
+	tmp = readl(SLC_CFG(host->io_base));
+	if (ctrl & NAND_NCE)
+		tmp |= SLCCFG_CE_LOW;
+	else
+		tmp &= ~SLCCFG_CE_LOW;
+	writel(tmp, SLC_CFG(host->io_base));
+
+	if (cmd != NAND_CMD_NONE) {
+		if (ctrl & NAND_CLE)
+			writel(cmd, SLC_CMD(host->io_base));
+		else
+			writel(cmd, SLC_ADDR(host->io_base));
+	}
+}
+
+/*
+ * Read the Device Ready pin
+ */
+static int lpc32xx_nand_device_ready(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct lpc32xx_nand_host *host = chip->priv;
+	int rdy = 0;
+
+	if ((readl(SLC_STAT(host->io_base)) & SLCSTAT_NAND_READY) != 0)
+		rdy = 1;
+
+	return rdy;
+}
+
+/*
+ * Enable NAND write protect
+ */
+static void lpc32xx_wp_enable(struct lpc32xx_nand_host *host)
+{
+	if (gpio_is_valid(host->ncfg->wp_gpio))
+		gpio_set_value(host->ncfg->wp_gpio, 0);
+}
+
+/*
+ * Disable NAND write protect
+ */
+static void lpc32xx_wp_disable(struct lpc32xx_nand_host *host)
+{
+	if (gpio_is_valid(host->ncfg->wp_gpio))
+		gpio_set_value(host->ncfg->wp_gpio, 1);
+}
+
+/*
+ * Prepares SLC for transfers with H/W ECC enabled
+ */
+static void lpc32xx_nand_ecc_enable(struct mtd_info *mtd, int mode)
+{
+	/* Hardware ECC is enabled automatically in hardware as needed */
+}
+
+/*
+ * Calculates the ECC for the data
+ */
+static int lpc32xx_nand_ecc_calculate(struct mtd_info *mtd,
+				      const unsigned char *buf,
+				      unsigned char *code)
+{
+	/*
+	 * ECC is calculated automatically in hardware during syndrome read
+	 * and write operations, so it doesn't need to be calculated here.
+	 */
+	return 0;
+}
+
+/*
+ * Read a single byte from NAND device
+ */
+static uint8_t lpc32xx_nand_read_byte(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct lpc32xx_nand_host *host = chip->priv;
+
+	return (uint8_t)readl(SLC_DATA(host->io_base));
+}
+
+/*
+ * Simple device read without ECC
+ */
+static void lpc32xx_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct lpc32xx_nand_host *host = chip->priv;
+
+	/* Direct device read with no ECC */
+	while (len-- > 0)
+		*buf++ = (uint8_t)readl(SLC_DATA(host->io_base));
+}
+
+/*
+ * Simple device write without ECC
+ */
+static void lpc32xx_nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct lpc32xx_nand_host *host = chip->priv;
+
+	/* Direct device write with no ECC */
+	while (len-- > 0)
+		writel((uint32_t)*buf++, SLC_DATA(host->io_base));
+}
+
+/*
+ * Read the OOB data from the device without ECC using FIFO method
+ */
+static int lpc32xx_nand_read_oob_syndrome(struct mtd_info *mtd,
+					  struct nand_chip *chip, int page)
+{
+	chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	return 0;
+}
+
+/*
+ * Write the OOB data to the device without ECC using FIFO method
+ */
+static int lpc32xx_nand_write_oob_syndrome(struct mtd_info *mtd,
+	struct nand_chip *chip, int page)
+{
+	int status;
+
+	chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page);
+	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	/* Send command to program the OOB data */
+	chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+	status = chip->waitfunc(mtd, chip);
+
+	return status & NAND_STATUS_FAIL ? -EIO : 0;
+}
+
+/*
+ * Fills in the ECC fields in the OOB buffer with the hardware generated ECC
+ */
+static void lpc32xx_slc_ecc_copy(uint8_t *spare, const uint32_t *ecc, int count)
+{
+	int i;
+
+	for (i = 0; i < (count * 3); i += 3) {
+		uint32_t ce = ecc[i / 3];
+		ce = ~(ce << 2) & 0xFFFFFF;
+		spare[i + 2] = (uint8_t)(ce & 0xFF);
+		ce >>= 8;
+		spare[i + 1] = (uint8_t)(ce & 0xFF);
+		ce >>= 8;
+		spare[i] = (uint8_t)(ce & 0xFF);
+	}
+}
+
+static void lpc32xx_dma_complete_func(void *completion)
+{
+	complete(completion);
+}
+
+static int lpc32xx_xmit_dma(struct mtd_info *mtd, dma_addr_t dma,
+			    void *mem, int len, enum dma_transfer_direction dir)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct lpc32xx_nand_host *host = chip->priv;
+	struct dma_async_tx_descriptor *desc;
+	int flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
+	int res;
+
+	host->dma_slave_config.direction = dir;
+	host->dma_slave_config.src_addr = dma;
+	host->dma_slave_config.dst_addr = dma;
+	host->dma_slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	host->dma_slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	host->dma_slave_config.src_maxburst = 4;
+	host->dma_slave_config.dst_maxburst = 4;
+	/* DMA controller does flow control: */
+	host->dma_slave_config.device_fc = false;
+	if (dmaengine_slave_config(host->dma_chan, &host->dma_slave_config)) {
+		dev_err(mtd->dev.parent, "Failed to setup DMA slave\n");
+		return -ENXIO;
+	}
+
+	sg_init_one(&host->sgl, mem, len);
+
+	res = dma_map_sg(host->dma_chan->device->dev, &host->sgl, 1,
+			 DMA_BIDIRECTIONAL);
+	if (res != 1) {
+		dev_err(mtd->dev.parent, "Failed to map sg list\n");
+		return -ENXIO;
+	}
+	desc = dmaengine_prep_slave_sg(host->dma_chan, &host->sgl, 1, dir,
+				       flags);
+	if (!desc) {
+		dev_err(mtd->dev.parent, "Failed to prepare slave sg\n");
+		goto out1;
+	}
+
+	init_completion(&host->comp);
+	desc->callback = lpc32xx_dma_complete_func;
+	desc->callback_param = &host->comp;
+
+	dmaengine_submit(desc);
+	dma_async_issue_pending(host->dma_chan);
+
+	wait_for_completion_timeout(&host->comp, msecs_to_jiffies(1000));
+
+	dma_unmap_sg(host->dma_chan->device->dev, &host->sgl, 1,
+		     DMA_BIDIRECTIONAL);
+
+	return 0;
+out1:
+	dma_unmap_sg(host->dma_chan->device->dev, &host->sgl, 1,
+		     DMA_BIDIRECTIONAL);
+	return -ENXIO;
+}
+
+/*
+ * DMA read/write transfers with ECC support
+ */
+static int lpc32xx_xfer(struct mtd_info *mtd, uint8_t *buf, int eccsubpages,
+			int read)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct lpc32xx_nand_host *host = chip->priv;
+	int i, status = 0;
+	unsigned long timeout;
+	int res;
+	enum dma_transfer_direction dir =
+		read ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV;
+	uint8_t *dma_buf;
+	bool dma_mapped;
+
+	if ((void *)buf <= high_memory) {
+		dma_buf = buf;
+		dma_mapped = true;
+	} else {
+		dma_buf = host->data_buf;
+		dma_mapped = false;
+		if (!read)
+			memcpy(host->data_buf, buf, mtd->writesize);
+	}
+
+	if (read) {
+		writel(readl(SLC_CFG(host->io_base)) |
+		       SLCCFG_DMA_DIR | SLCCFG_ECC_EN | SLCCFG_DMA_ECC |
+		       SLCCFG_DMA_BURST, SLC_CFG(host->io_base));
+	} else {
+		writel((readl(SLC_CFG(host->io_base)) |
+			SLCCFG_ECC_EN | SLCCFG_DMA_ECC | SLCCFG_DMA_BURST) &
+		       ~SLCCFG_DMA_DIR,
+			SLC_CFG(host->io_base));
+	}
+
+	/* Clear initial ECC */
+	writel(SLCCTRL_ECC_CLEAR, SLC_CTRL(host->io_base));
+
+	/* Transfer size is data area only */
+	writel(mtd->writesize, SLC_TC(host->io_base));
+
+	/* Start transfer in the NAND controller */
+	writel(readl(SLC_CTRL(host->io_base)) | SLCCTRL_DMA_START,
+	       SLC_CTRL(host->io_base));
+
+	for (i = 0; i < chip->ecc.steps; i++) {
+		/* Data */
+		res = lpc32xx_xmit_dma(mtd, SLC_DMA_DATA(host->io_base_dma),
+				       dma_buf + i * chip->ecc.size,
+				       mtd->writesize / chip->ecc.steps, dir);
+		if (res)
+			return res;
+
+		/* Always _read_ ECC */
+		if (i == chip->ecc.steps - 1)
+			break;
+		if (!read) /* ECC availability delayed on write */
+			udelay(10);
+		res = lpc32xx_xmit_dma(mtd, SLC_ECC(host->io_base_dma),
+				       &host->ecc_buf[i], 4, DMA_DEV_TO_MEM);
+		if (res)
+			return res;
+	}
+
+	/*
+	 * According to NXP, the DMA can be finished here, but the NAND
+	 * controller may still have buffered data. After porting to using the
+	 * dmaengine DMA driver (amba-pl080), the condition (DMA_FIFO empty)
+	 * appears to be always true, according to tests. Keeping the check for
+	 * safety reasons for now.
+	 */
+	if (readl(SLC_STAT(host->io_base)) & SLCSTAT_DMA_FIFO) {
+		dev_warn(mtd->dev.parent, "FIFO not empty!\n");
+		timeout = jiffies + msecs_to_jiffies(LPC32XX_DMA_TIMEOUT);
+		while ((readl(SLC_STAT(host->io_base)) & SLCSTAT_DMA_FIFO) &&
+		       time_before(jiffies, timeout))
+			cpu_relax();
+		if (!time_before(jiffies, timeout)) {
+			dev_err(mtd->dev.parent, "FIFO held data too long\n");
+			status = -EIO;
+		}
+	}
+
+	/* Read last calculated ECC value */
+	if (!read)
+		udelay(10);
+	host->ecc_buf[chip->ecc.steps - 1] =
+		readl(SLC_ECC(host->io_base));
+
+	/* Flush DMA */
+	dmaengine_terminate_all(host->dma_chan);
+
+	if (readl(SLC_STAT(host->io_base)) & SLCSTAT_DMA_FIFO ||
+	    readl(SLC_TC(host->io_base))) {
+		/* Something is left in the FIFO, something is wrong */
+		dev_err(mtd->dev.parent, "DMA FIFO failure\n");
+		status = -EIO;
+	}
+
+	/* Stop DMA & HW ECC */
+	writel(readl(SLC_CTRL(host->io_base)) & ~SLCCTRL_DMA_START,
+	       SLC_CTRL(host->io_base));
+	writel(readl(SLC_CFG(host->io_base)) &
+	       ~(SLCCFG_DMA_DIR | SLCCFG_ECC_EN | SLCCFG_DMA_ECC |
+		 SLCCFG_DMA_BURST), SLC_CFG(host->io_base));
+
+	if (!dma_mapped && read)
+		memcpy(buf, host->data_buf, mtd->writesize);
+
+	return status;
+}
+
+/*
+ * Read the data and OOB data from the device, use ECC correction with the
+ * data, disable ECC for the OOB data
+ */
+static int lpc32xx_nand_read_page_syndrome(struct mtd_info *mtd,
+					   struct nand_chip *chip, uint8_t *buf,
+					   int oob_required, int page)
+{
+	struct lpc32xx_nand_host *host = chip->priv;
+	int stat, i, status;
+	uint8_t *oobecc, tmpecc[LPC32XX_ECC_SAVE_SIZE];
+
+	/* Issue read command */
+	chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+
+	/* Read data and oob, calculate ECC */
+	status = lpc32xx_xfer(mtd, buf, chip->ecc.steps, 1);
+
+	/* Get OOB data */
+	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	/* Convert to stored ECC format */
+	lpc32xx_slc_ecc_copy(tmpecc, (uint32_t *) host->ecc_buf, chip->ecc.steps);
+
+	/* Pointer to ECC data retrieved from NAND spare area */
+	oobecc = chip->oob_poi + chip->ecc.layout->eccpos[0];
+
+	for (i = 0; i < chip->ecc.steps; i++) {
+		stat = chip->ecc.correct(mtd, buf, oobecc,
+					 &tmpecc[i * chip->ecc.bytes]);
+		if (stat < 0)
+			mtd->ecc_stats.failed++;
+		else
+			mtd->ecc_stats.corrected += stat;
+
+		buf += chip->ecc.size;
+		oobecc += chip->ecc.bytes;
+	}
+
+	return status;
+}
+
+/*
+ * Read the data and OOB data from the device, no ECC correction with the
+ * data or OOB data
+ */
+static int lpc32xx_nand_read_page_raw_syndrome(struct mtd_info *mtd,
+					       struct nand_chip *chip,
+					       uint8_t *buf, int oob_required,
+					       int page)
+{
+	/* Issue read command */
+	chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+
+	/* Raw reads can just use the FIFO interface */
+	chip->read_buf(mtd, buf, chip->ecc.size * chip->ecc.steps);
+	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	return 0;
+}
+
+/*
+ * Write the data and OOB data to the device, use ECC with the data,
+ * disable ECC for the OOB data
+ */
+static int lpc32xx_nand_write_page_syndrome(struct mtd_info *mtd,
+					    struct nand_chip *chip,
+					    const uint8_t *buf, int oob_required)
+{
+	struct lpc32xx_nand_host *host = chip->priv;
+	uint8_t *pb = chip->oob_poi + chip->ecc.layout->eccpos[0];
+	int error;
+
+	/* Write data, calculate ECC on outbound data */
+	error = lpc32xx_xfer(mtd, (uint8_t *)buf, chip->ecc.steps, 0);
+	if (error)
+		return error;
+
+	/*
+	 * The calculated ECC needs some manual work done to it before
+	 * committing it to NAND. Process the calculated ECC and place
+	 * the resultant values directly into the OOB buffer. */
+	lpc32xx_slc_ecc_copy(pb, (uint32_t *)host->ecc_buf, chip->ecc.steps);
+
+	/* Write ECC data to device */
+	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+	return 0;
+}
+
+/*
+ * Write the data and OOB data to the device, no ECC correction with the
+ * data or OOB data
+ */
+static int lpc32xx_nand_write_page_raw_syndrome(struct mtd_info *mtd,
+						struct nand_chip *chip,
+						const uint8_t *buf,
+						int oob_required)
+{
+	/* Raw writes can just use the FIFO interface */
+	chip->write_buf(mtd, buf, chip->ecc.size * chip->ecc.steps);
+	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+	return 0;
+}
+
+static int lpc32xx_nand_dma_setup(struct lpc32xx_nand_host *host)
+{
+	struct mtd_info *mtd = &host->mtd;
+	dma_cap_mask_t mask;
+
+	if (!host->pdata || !host->pdata->dma_filter) {
+		dev_err(mtd->dev.parent, "no DMA platform data\n");
+		return -ENOENT;
+	}
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+	host->dma_chan = dma_request_channel(mask, host->pdata->dma_filter,
+					     "nand-slc");
+	if (!host->dma_chan) {
+		dev_err(mtd->dev.parent, "Failed to request DMA channel\n");
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static struct lpc32xx_nand_cfg_slc *lpc32xx_parse_dt(struct device *dev)
+{
+	struct lpc32xx_nand_cfg_slc *ncfg;
+	struct device_node *np = dev->of_node;
+
+	ncfg = devm_kzalloc(dev, sizeof(*ncfg), GFP_KERNEL);
+	if (!ncfg)
+		return NULL;
+
+	of_property_read_u32(np, "nxp,wdr-clks", &ncfg->wdr_clks);
+	of_property_read_u32(np, "nxp,wwidth", &ncfg->wwidth);
+	of_property_read_u32(np, "nxp,whold", &ncfg->whold);
+	of_property_read_u32(np, "nxp,wsetup", &ncfg->wsetup);
+	of_property_read_u32(np, "nxp,rdr-clks", &ncfg->rdr_clks);
+	of_property_read_u32(np, "nxp,rwidth", &ncfg->rwidth);
+	of_property_read_u32(np, "nxp,rhold", &ncfg->rhold);
+	of_property_read_u32(np, "nxp,rsetup", &ncfg->rsetup);
+
+	if (!ncfg->wdr_clks || !ncfg->wwidth || !ncfg->whold ||
+	    !ncfg->wsetup || !ncfg->rdr_clks || !ncfg->rwidth ||
+	    !ncfg->rhold || !ncfg->rsetup) {
+		dev_err(dev, "chip parameters not specified correctly\n");
+		return NULL;
+	}
+
+	ncfg->use_bbt = of_get_nand_on_flash_bbt(np);
+	ncfg->wp_gpio = of_get_named_gpio(np, "gpios", 0);
+
+	return ncfg;
+}
+
+/*
+ * Probe for NAND controller
+ */
+static int lpc32xx_nand_probe(struct platform_device *pdev)
+{
+	struct lpc32xx_nand_host *host;
+	struct mtd_info *mtd;
+	struct nand_chip *chip;
+	struct resource *rc;
+	struct mtd_part_parser_data ppdata = {};
+	int res;
+
+	rc = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (rc == NULL) {
+		dev_err(&pdev->dev, "No memory resource found for device\n");
+		return -EBUSY;
+	}
+
+	/* Allocate memory for the device structure (and zero it) */
+	host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
+	if (!host)
+		return -ENOMEM;
+	host->io_base_dma = rc->start;
+
+	host->io_base = devm_ioremap_resource(&pdev->dev, rc);
+	if (IS_ERR(host->io_base))
+		return PTR_ERR(host->io_base);
+
+	if (pdev->dev.of_node)
+		host->ncfg = lpc32xx_parse_dt(&pdev->dev);
+	if (!host->ncfg) {
+		dev_err(&pdev->dev,
+			"Missing or bad NAND config from device tree\n");
+		return -ENOENT;
+	}
+	if (host->ncfg->wp_gpio == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+	if (gpio_is_valid(host->ncfg->wp_gpio) && devm_gpio_request(&pdev->dev,
+			host->ncfg->wp_gpio, "NAND WP")) {
+		dev_err(&pdev->dev, "GPIO not available\n");
+		return -EBUSY;
+	}
+	lpc32xx_wp_disable(host);
+
+	host->pdata = dev_get_platdata(&pdev->dev);
+
+	mtd = &host->mtd;
+	chip = &host->nand_chip;
+	chip->priv = host;
+	mtd->priv = chip;
+	mtd->owner = THIS_MODULE;
+	mtd->dev.parent = &pdev->dev;
+
+	/* Get NAND clock */
+	host->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(host->clk)) {
+		dev_err(&pdev->dev, "Clock failure\n");
+		res = -ENOENT;
+		goto err_exit1;
+	}
+	clk_enable(host->clk);
+
+	/* Set NAND IO addresses and command/ready functions */
+	chip->IO_ADDR_R = SLC_DATA(host->io_base);
+	chip->IO_ADDR_W = SLC_DATA(host->io_base);
+	chip->cmd_ctrl = lpc32xx_nand_cmd_ctrl;
+	chip->dev_ready = lpc32xx_nand_device_ready;
+	chip->chip_delay = 20; /* 20us command delay time */
+
+	/* Init NAND controller */
+	lpc32xx_nand_setup(host);
+
+	platform_set_drvdata(pdev, host);
+
+	/* NAND callbacks for LPC32xx SLC hardware */
+	chip->ecc.mode = NAND_ECC_HW_SYNDROME;
+	chip->read_byte = lpc32xx_nand_read_byte;
+	chip->read_buf = lpc32xx_nand_read_buf;
+	chip->write_buf = lpc32xx_nand_write_buf;
+	chip->ecc.read_page_raw = lpc32xx_nand_read_page_raw_syndrome;
+	chip->ecc.read_page = lpc32xx_nand_read_page_syndrome;
+	chip->ecc.write_page_raw = lpc32xx_nand_write_page_raw_syndrome;
+	chip->ecc.write_page = lpc32xx_nand_write_page_syndrome;
+	chip->ecc.write_oob = lpc32xx_nand_write_oob_syndrome;
+	chip->ecc.read_oob = lpc32xx_nand_read_oob_syndrome;
+	chip->ecc.calculate = lpc32xx_nand_ecc_calculate;
+	chip->ecc.correct = nand_correct_data;
+	chip->ecc.strength = 1;
+	chip->ecc.hwctl = lpc32xx_nand_ecc_enable;
+
+	/* bitflip_threshold's default is defined as ecc_strength anyway.
+	 * Unfortunately, it is set only later at add_mtd_device(). Meanwhile
+	 * being 0, it causes bad block table scanning errors in
+	 * nand_scan_tail(), so preparing it here already. */
+	mtd->bitflip_threshold = chip->ecc.strength;
+
+	/*
+	 * Allocate a large enough buffer for a single huge page plus
+	 * extra space for the spare area and ECC storage area
+	 */
+	host->dma_buf_len = LPC32XX_DMA_DATA_SIZE + LPC32XX_ECC_SAVE_SIZE;
+	host->data_buf = devm_kzalloc(&pdev->dev, host->dma_buf_len,
+				      GFP_KERNEL);
+	if (host->data_buf == NULL) {
+		res = -ENOMEM;
+		goto err_exit2;
+	}
+
+	res = lpc32xx_nand_dma_setup(host);
+	if (res) {
+		res = -EIO;
+		goto err_exit2;
+	}
+
+	/* Find NAND device */
+	if (nand_scan_ident(mtd, 1, NULL)) {
+		res = -ENXIO;
+		goto err_exit3;
+	}
+
+	/* OOB and ECC CPU and DMA work areas */
+	host->ecc_buf = (uint32_t *)(host->data_buf + LPC32XX_DMA_DATA_SIZE);
+
+	/*
+	 * Small page FLASH has a unique OOB layout, but large and huge
+	 * page FLASH use the standard layout. Small page FLASH uses a
+	 * custom BBT marker layout.
+	 */
+	if (mtd->writesize <= 512)
+		chip->ecc.layout = &lpc32xx_nand_oob_16;
+
+	/* These sizes remain the same regardless of page size */
+	chip->ecc.size = 256;
+	chip->ecc.bytes = LPC32XX_SLC_DEV_ECC_BYTES;
+	chip->ecc.prepad = chip->ecc.postpad = 0;
+
+	/* Avoid extra scan if using BBT, setup BBT support */
+	if (host->ncfg->use_bbt) {
+		chip->bbt_options |= NAND_BBT_USE_FLASH;
+
+		/*
+		 * Use a custom BBT marker setup for small page FLASH that
+		 * won't interfere with the ECC layout. Large and huge page
+		 * FLASH use the standard layout.
+		 */
+		if (mtd->writesize <= 512) {
+			chip->bbt_td = &bbt_smallpage_main_descr;
+			chip->bbt_md = &bbt_smallpage_mirror_descr;
+		}
+	}
+
+	/*
+	 * Fills out all the uninitialized function pointers with the defaults
+	 */
+	if (nand_scan_tail(mtd)) {
+		res = -ENXIO;
+		goto err_exit3;
+	}
+
+	mtd->name = "nxp_lpc3220_slc";
+	ppdata.of_node = pdev->dev.of_node;
+	res = mtd_device_parse_register(mtd, NULL, &ppdata, host->ncfg->parts,
+					host->ncfg->num_parts);
+	if (!res)
+		return res;
+
+	nand_release(mtd);
+
+err_exit3:
+	dma_release_channel(host->dma_chan);
+err_exit2:
+	clk_disable(host->clk);
+err_exit1:
+	lpc32xx_wp_enable(host);
+
+	return res;
+}
+
+/*
+ * Remove NAND device.
+ */
+static int lpc32xx_nand_remove(struct platform_device *pdev)
+{
+	uint32_t tmp;
+	struct lpc32xx_nand_host *host = platform_get_drvdata(pdev);
+	struct mtd_info *mtd = &host->mtd;
+
+	nand_release(mtd);
+	dma_release_channel(host->dma_chan);
+
+	/* Force CE high */
+	tmp = readl(SLC_CTRL(host->io_base));
+	tmp &= ~SLCCFG_CE_LOW;
+	writel(tmp, SLC_CTRL(host->io_base));
+
+	clk_disable(host->clk);
+	lpc32xx_wp_enable(host);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int lpc32xx_nand_resume(struct platform_device *pdev)
+{
+	struct lpc32xx_nand_host *host = platform_get_drvdata(pdev);
+
+	/* Re-enable NAND clock */
+	clk_enable(host->clk);
+
+	/* Fresh init of NAND controller */
+	lpc32xx_nand_setup(host);
+
+	/* Disable write protect */
+	lpc32xx_wp_disable(host);
+
+	return 0;
+}
+
+static int lpc32xx_nand_suspend(struct platform_device *pdev, pm_message_t pm)
+{
+	uint32_t tmp;
+	struct lpc32xx_nand_host *host = platform_get_drvdata(pdev);
+
+	/* Force CE high */
+	tmp = readl(SLC_CTRL(host->io_base));
+	tmp &= ~SLCCFG_CE_LOW;
+	writel(tmp, SLC_CTRL(host->io_base));
+
+	/* Enable write protect for safety */
+	lpc32xx_wp_enable(host);
+
+	/* Disable clock */
+	clk_disable(host->clk);
+
+	return 0;
+}
+
+#else
+#define lpc32xx_nand_resume NULL
+#define lpc32xx_nand_suspend NULL
+#endif
+
+static const struct of_device_id lpc32xx_nand_match[] = {
+	{ .compatible = "nxp,lpc3220-slc" },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, lpc32xx_nand_match);
+
+static struct platform_driver lpc32xx_nand_driver = {
+	.probe		= lpc32xx_nand_probe,
+	.remove		= lpc32xx_nand_remove,
+	.resume		= lpc32xx_nand_resume,
+	.suspend	= lpc32xx_nand_suspend,
+	.driver		= {
+		.name	= LPC32XX_MODNAME,
+		.owner	= THIS_MODULE,
+		.of_match_table = lpc32xx_nand_match,
+	},
+};
+
+module_platform_driver(lpc32xx_nand_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>");
+MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
+MODULE_DESCRIPTION("NAND driver for the NXP LPC32XX SLC controller");
diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c
index 0a130dcaa12..e78841a2dcc 100644
--- a/drivers/mtd/nand/mpc5121_nfc.c
+++ b/drivers/mtd/nand/mpc5121_nfc.c
@@ -29,13 +29,15 @@
 #include <linux/clk.h>
 #include <linux/gfp.h>
 #include <linux/delay.h>
-#include <linux/init.h>
+#include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/of_address.h>
 #include <linux/of_device.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 
 #include <asm/mpc5121.h>
@@ -130,10 +132,6 @@ struct mpc5121_nfc_prv {
 
 static void mpc5121_nfc_done(struct mtd_info *mtd);
 
-#ifdef CONFIG_MTD_PARTITIONS
-static const char *mpc5121_nfc_pprobes[] = { "cmdlinepart", NULL };
-#endif
-
 /* Read NFC register */
 static inline u16 nfc_read(struct mtd_info *mtd, uint reg)
 {
@@ -509,27 +507,6 @@ static void mpc5121_nfc_write_buf(struct mtd_info *mtd,
 	mpc5121_nfc_buf_copy(mtd, (u_char *)buf, len, 1);
 }
 
-/* Compare buffer with NAND flash */
-static int mpc5121_nfc_verify_buf(struct mtd_info *mtd,
-						const u_char *buf, int len)
-{
-	u_char tmp[256];
-	uint bsize;
-
-	while (len) {
-		bsize = min(len, 256);
-		mpc5121_nfc_read_buf(mtd, tmp, bsize);
-
-		if (memcmp(buf, tmp, bsize))
-			return 1;
-
-		buf += bsize;
-		len -= bsize;
-	}
-
-	return 0;
-}
-
 /* Read byte from NFC buffers */
 static u8 mpc5121_nfc_read_byte(struct mtd_info *mtd)
 {
@@ -568,6 +545,7 @@ static int mpc5121_nfc_read_hw_config(struct mtd_info *mtd)
 	uint rcw_width;
 	uint rcwh;
 	uint romloc, ps;
+	int ret = 0;
 
 	rmnode = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-reset");
 	if (!rmnode) {
@@ -579,7 +557,8 @@ static int mpc5121_nfc_read_hw_config(struct mtd_info *mtd)
 	rm = of_iomap(rmnode, 0);
 	if (!rm) {
 		dev_err(prv->dev, "Error mapping reset module node!\n");
-		return -EBUSY;
+		ret = -EBUSY;
+		goto out;
 	}
 
 	rcwh = in_be32(&rm->rcwhr);
@@ -628,8 +607,9 @@ static int mpc5121_nfc_read_hw_config(struct mtd_info *mtd)
 				rcw_width * 8, rcw_pagesize,
 				rcw_sparesize);
 	iounmap(rm);
+out:
 	of_node_put(rmnode);
-	return 0;
+	return ret;
 }
 
 /* Free driver resources */
@@ -638,32 +618,28 @@ static void mpc5121_nfc_free(struct device *dev, struct mtd_info *mtd)
 	struct nand_chip *chip = mtd->priv;
 	struct mpc5121_nfc_prv *prv = chip->priv;
 
-	if (prv->clk) {
-		clk_disable(prv->clk);
-		clk_put(prv->clk);
-	}
+	if (prv->clk)
+		clk_disable_unprepare(prv->clk);
 
 	if (prv->csreg)
 		iounmap(prv->csreg);
 }
 
-static int __devinit mpc5121_nfc_probe(struct of_device *op,
-					const struct of_device_id *match)
+static int mpc5121_nfc_probe(struct platform_device *op)
 {
 	struct device_node *rootnode, *dn = op->dev.of_node;
+	struct clk *clk;
 	struct device *dev = &op->dev;
 	struct mpc5121_nfc_prv *prv;
 	struct resource res;
 	struct mtd_info *mtd;
-#ifdef CONFIG_MTD_PARTITIONS
-	struct mtd_partition *parts;
-#endif
 	struct nand_chip *chip;
 	unsigned long regs_paddr, regs_size;
-	const uint *chips_no;
+	const __be32 *chips_no;
 	int resettime = 0;
 	int retval = 0;
 	int rev, len;
+	struct mtd_part_parser_data ppdata;
 
 	/*
 	 * Check SoC revision. This driver supports only NFC
@@ -676,10 +652,8 @@ static int __devinit mpc5121_nfc_probe(struct of_device *op,
 	}
 
 	prv = devm_kzalloc(dev, sizeof(*prv), GFP_KERNEL);
-	if (!prv) {
-		dev_err(dev, "Memory exhausted!\n");
+	if (!prv)
 		return -ENOMEM;
-	}
 
 	mtd = &prv->mtd;
 	chip = &prv->chip;
@@ -714,7 +688,7 @@ static int __devinit mpc5121_nfc_probe(struct of_device *op,
 	}
 
 	regs_paddr = res.start;
-	regs_size = res.end - res.start + 1;
+	regs_size = resource_size(&res);
 
 	if (!devm_request_mem_region(dev, regs_paddr, regs_size, DRV_NAME)) {
 		dev_err(dev, "Error requesting memory region!\n");
@@ -728,15 +702,15 @@ static int __devinit mpc5121_nfc_probe(struct of_device *op,
 	}
 
 	mtd->name = "MPC5121 NAND";
+	ppdata.of_node = dn;
 	chip->dev_ready = mpc5121_nfc_dev_ready;
 	chip->cmdfunc = mpc5121_nfc_command;
 	chip->read_byte = mpc5121_nfc_read_byte;
 	chip->read_word = mpc5121_nfc_read_word;
 	chip->read_buf = mpc5121_nfc_read_buf;
 	chip->write_buf = mpc5121_nfc_write_buf;
-	chip->verify_buf = mpc5121_nfc_verify_buf;
 	chip->select_chip = mpc5121_nfc_select_chip;
-	chip->options = NAND_NO_AUTOINCR | NAND_USE_FLASH_BBT;
+	chip->bbt_options = NAND_BBT_USE_FLASH;
 	chip->ecc.mode = NAND_ECC_SOFT;
 
 	/* Support external chip-select logic on ADS5121 board */
@@ -754,14 +728,18 @@ static int __devinit mpc5121_nfc_probe(struct of_device *op,
 	of_node_put(rootnode);
 
 	/* Enable NFC clock */
-	prv->clk = clk_get(dev, "nfc_clk");
-	if (!prv->clk) {
+	clk = devm_clk_get(dev, "ipg");
+	if (IS_ERR(clk)) {
 		dev_err(dev, "Unable to acquire NFC clock!\n");
-		retval = -ENODEV;
+		retval = PTR_ERR(clk);
 		goto error;
 	}
-
-	clk_enable(prv->clk);
+	retval = clk_prepare_enable(clk);
+	if (retval) {
+		dev_err(dev, "Unable to enable NFC clock!\n");
+		goto error;
+	}
+	prv->clk = clk;
 
 	/* Reset NAND Flash controller */
 	nfc_set(mtd, NFC_CONFIG1, NFC_RESET);
@@ -803,9 +781,8 @@ static int __devinit mpc5121_nfc_probe(struct of_device *op,
 	}
 
 	/* Detect NAND chips */
-	if (nand_scan(mtd, *chips_no)) {
+	if (nand_scan(mtd, be32_to_cpup(chips_no))) {
 		dev_err(dev, "NAND Flash not found !\n");
-		devm_free_irq(dev, prv->irq, mtd);
 		retval = -ENXIO;
 		goto error;
 	}
@@ -830,7 +807,6 @@ static int __devinit mpc5121_nfc_probe(struct of_device *op,
 
 	default:
 		dev_err(dev, "Unsupported NAND flash!\n");
-		devm_free_irq(dev, prv->irq, mtd);
 		retval = -ENXIO;
 		goto error;
 	}
@@ -838,28 +814,9 @@ static int __devinit mpc5121_nfc_probe(struct of_device *op,
 	dev_set_drvdata(dev, mtd);
 
 	/* Register device in MTD */
-#ifdef CONFIG_MTD_PARTITIONS
-	retval = parse_mtd_partitions(mtd, mpc5121_nfc_pprobes, &parts, 0);
-#ifdef CONFIG_MTD_OF_PARTS
-	if (retval == 0)
-		retval = of_mtd_parse_partitions(dev, dn, &parts);
-#endif
-	if (retval < 0) {
-		dev_err(dev, "Error parsing MTD partitions!\n");
-		devm_free_irq(dev, prv->irq, mtd);
-		retval = -EINVAL;
-		goto error;
-	}
-
-	if (retval > 0)
-		retval = add_mtd_partitions(mtd, parts, retval);
-	else
-#endif
-		retval = add_mtd_device(mtd);
-
+	retval = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
 	if (retval) {
 		dev_err(dev, "Error adding MTD device!\n");
-		devm_free_irq(dev, prv->irq, mtd);
 		goto error;
 	}
 
@@ -869,28 +826,25 @@ error:
 	return retval;
 }
 
-static int __devexit mpc5121_nfc_remove(struct of_device *op)
+static int mpc5121_nfc_remove(struct platform_device *op)
 {
 	struct device *dev = &op->dev;
 	struct mtd_info *mtd = dev_get_drvdata(dev);
-	struct nand_chip *chip = mtd->priv;
-	struct mpc5121_nfc_prv *prv = chip->priv;
 
 	nand_release(mtd);
-	devm_free_irq(dev, prv->irq, mtd);
 	mpc5121_nfc_free(dev, mtd);
 
 	return 0;
 }
 
-static struct of_device_id mpc5121_nfc_match[] __devinitdata = {
+static struct of_device_id mpc5121_nfc_match[] = {
 	{ .compatible = "fsl,mpc5121-nfc", },
 	{},
 };
 
-static struct of_platform_driver mpc5121_nfc_driver = {
+static struct platform_driver mpc5121_nfc_driver = {
 	.probe		= mpc5121_nfc_probe,
-	.remove		= __devexit_p(mpc5121_nfc_remove),
+	.remove		= mpc5121_nfc_remove,
 	.driver		= {
 		.name = DRV_NAME,
 		.owner = THIS_MODULE,
@@ -898,19 +852,7 @@ static struct of_platform_driver mpc5121_nfc_driver = {
 	},
 };
 
-static int __init mpc5121_nfc_init(void)
-{
-	return of_register_platform_driver(&mpc5121_nfc_driver);
-}
-
-module_init(mpc5121_nfc_init);
-
-static void __exit mpc5121_nfc_cleanup(void)
-{
-	of_unregister_platform_driver(&mpc5121_nfc_driver);
-}
-
-module_exit(mpc5121_nfc_cleanup);
+module_platform_driver(mpc5121_nfc_driver);
 
 MODULE_AUTHOR("Freescale Semiconductor, Inc.");
 MODULE_DESCRIPTION("MPC5121 NAND MTD driver");
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 82e94389824..dba262bf766 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -30,92 +30,174 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/completion.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_mtd.h>
 
 #include <asm/mach/flash.h>
-#include <mach/mxc_nand.h>
-#include <mach/hardware.h>
+#include <linux/platform_data/mtd-mxc_nand.h>
 
 #define DRIVER_NAME "mxc_nand"
 
-#define nfc_is_v21()		(cpu_is_mx25() || cpu_is_mx35())
-#define nfc_is_v1()		(cpu_is_mx31() || cpu_is_mx27() || cpu_is_mx21())
-
 /* Addresses for NFC registers */
-#define NFC_BUF_SIZE		0xE00
-#define NFC_BUF_ADDR		0xE04
-#define NFC_FLASH_ADDR		0xE06
-#define NFC_FLASH_CMD		0xE08
-#define NFC_CONFIG		0xE0A
-#define NFC_ECC_STATUS_RESULT	0xE0C
-#define NFC_RSLTMAIN_AREA	0xE0E
-#define NFC_RSLTSPARE_AREA	0xE10
-#define NFC_WRPROT		0xE12
-#define NFC_V1_UNLOCKSTART_BLKADDR	0xe14
-#define NFC_V1_UNLOCKEND_BLKADDR	0xe16
-#define NFC_V21_UNLOCKSTART_BLKADDR	0xe20
-#define NFC_V21_UNLOCKEND_BLKADDR	0xe22
-#define NFC_NF_WRPRST		0xE18
-#define NFC_CONFIG1		0xE1A
-#define NFC_CONFIG2		0xE1C
-
-/* Set INT to 0, FCMD to 1, rest to 0 in NFC_CONFIG2 Register
- * for Command operation */
-#define NFC_CMD            0x1
-
-/* Set INT to 0, FADD to 1, rest to 0 in NFC_CONFIG2 Register
- * for Address operation */
-#define NFC_ADDR           0x2
-
-/* Set INT to 0, FDI to 1, rest to 0 in NFC_CONFIG2 Register
- * for Input operation */
-#define NFC_INPUT          0x4
-
-/* Set INT to 0, FDO to 001, rest to 0 in NFC_CONFIG2 Register
- * for Data Output operation */
-#define NFC_OUTPUT         0x8
-
-/* Set INT to 0, FD0 to 010, rest to 0 in NFC_CONFIG2 Register
- * for Read ID operation */
-#define NFC_ID             0x10
-
-/* Set INT to 0, FDO to 100, rest to 0 in NFC_CONFIG2 Register
- * for Read Status operation */
-#define NFC_STATUS         0x20
-
-/* Set INT to 1, rest to 0 in NFC_CONFIG2 Register for Read
- * Status operation */
-#define NFC_INT            0x8000
-
-#define NFC_SP_EN           (1 << 2)
-#define NFC_ECC_EN          (1 << 3)
-#define NFC_INT_MSK         (1 << 4)
-#define NFC_BIG             (1 << 5)
-#define NFC_RST             (1 << 6)
-#define NFC_CE              (1 << 7)
-#define NFC_ONE_CYCLE       (1 << 8)
+#define NFC_V1_V2_BUF_SIZE		(host->regs + 0x00)
+#define NFC_V1_V2_BUF_ADDR		(host->regs + 0x04)
+#define NFC_V1_V2_FLASH_ADDR		(host->regs + 0x06)
+#define NFC_V1_V2_FLASH_CMD		(host->regs + 0x08)
+#define NFC_V1_V2_CONFIG		(host->regs + 0x0a)
+#define NFC_V1_V2_ECC_STATUS_RESULT	(host->regs + 0x0c)
+#define NFC_V1_V2_RSLTMAIN_AREA		(host->regs + 0x0e)
+#define NFC_V1_V2_RSLTSPARE_AREA	(host->regs + 0x10)
+#define NFC_V1_V2_WRPROT		(host->regs + 0x12)
+#define NFC_V1_UNLOCKSTART_BLKADDR	(host->regs + 0x14)
+#define NFC_V1_UNLOCKEND_BLKADDR	(host->regs + 0x16)
+#define NFC_V21_UNLOCKSTART_BLKADDR0	(host->regs + 0x20)
+#define NFC_V21_UNLOCKSTART_BLKADDR1	(host->regs + 0x24)
+#define NFC_V21_UNLOCKSTART_BLKADDR2	(host->regs + 0x28)
+#define NFC_V21_UNLOCKSTART_BLKADDR3	(host->regs + 0x2c)
+#define NFC_V21_UNLOCKEND_BLKADDR0	(host->regs + 0x22)
+#define NFC_V21_UNLOCKEND_BLKADDR1	(host->regs + 0x26)
+#define NFC_V21_UNLOCKEND_BLKADDR2	(host->regs + 0x2a)
+#define NFC_V21_UNLOCKEND_BLKADDR3	(host->regs + 0x2e)
+#define NFC_V1_V2_NF_WRPRST		(host->regs + 0x18)
+#define NFC_V1_V2_CONFIG1		(host->regs + 0x1a)
+#define NFC_V1_V2_CONFIG2		(host->regs + 0x1c)
+
+#define NFC_V2_CONFIG1_ECC_MODE_4	(1 << 0)
+#define NFC_V1_V2_CONFIG1_SP_EN		(1 << 2)
+#define NFC_V1_V2_CONFIG1_ECC_EN	(1 << 3)
+#define NFC_V1_V2_CONFIG1_INT_MSK	(1 << 4)
+#define NFC_V1_V2_CONFIG1_BIG		(1 << 5)
+#define NFC_V1_V2_CONFIG1_RST		(1 << 6)
+#define NFC_V1_V2_CONFIG1_CE		(1 << 7)
+#define NFC_V2_CONFIG1_ONE_CYCLE	(1 << 8)
+#define NFC_V2_CONFIG1_PPB(x)		(((x) & 0x3) << 9)
+#define NFC_V2_CONFIG1_FP_INT		(1 << 11)
+
+#define NFC_V1_V2_CONFIG2_INT		(1 << 15)
+
+/*
+ * Operation modes for the NFC. Valid for v1, v2 and v3
+ * type controllers.
+ */
+#define NFC_CMD				(1 << 0)
+#define NFC_ADDR			(1 << 1)
+#define NFC_INPUT			(1 << 2)
+#define NFC_OUTPUT			(1 << 3)
+#define NFC_ID				(1 << 4)
+#define NFC_STATUS			(1 << 5)
+
+#define NFC_V3_FLASH_CMD		(host->regs_axi + 0x00)
+#define NFC_V3_FLASH_ADDR0		(host->regs_axi + 0x04)
+
+#define NFC_V3_CONFIG1			(host->regs_axi + 0x34)
+#define NFC_V3_CONFIG1_SP_EN		(1 << 0)
+#define NFC_V3_CONFIG1_RBA(x)		(((x) & 0x7 ) << 4)
+
+#define NFC_V3_ECC_STATUS_RESULT	(host->regs_axi + 0x38)
+
+#define NFC_V3_LAUNCH			(host->regs_axi + 0x40)
+
+#define NFC_V3_WRPROT			(host->regs_ip + 0x0)
+#define NFC_V3_WRPROT_LOCK_TIGHT	(1 << 0)
+#define NFC_V3_WRPROT_LOCK		(1 << 1)
+#define NFC_V3_WRPROT_UNLOCK		(1 << 2)
+#define NFC_V3_WRPROT_BLS_UNLOCK	(2 << 6)
+
+#define NFC_V3_WRPROT_UNLOCK_BLK_ADD0   (host->regs_ip + 0x04)
+
+#define NFC_V3_CONFIG2			(host->regs_ip + 0x24)
+#define NFC_V3_CONFIG2_PS_512			(0 << 0)
+#define NFC_V3_CONFIG2_PS_2048			(1 << 0)
+#define NFC_V3_CONFIG2_PS_4096			(2 << 0)
+#define NFC_V3_CONFIG2_ONE_CYCLE		(1 << 2)
+#define NFC_V3_CONFIG2_ECC_EN			(1 << 3)
+#define NFC_V3_CONFIG2_2CMD_PHASES		(1 << 4)
+#define NFC_V3_CONFIG2_NUM_ADDR_PHASE0		(1 << 5)
+#define NFC_V3_CONFIG2_ECC_MODE_8		(1 << 6)
+#define NFC_V3_CONFIG2_PPB(x, shift)		(((x) & 0x3) << shift)
+#define NFC_V3_CONFIG2_NUM_ADDR_PHASE1(x)	(((x) & 0x3) << 12)
+#define NFC_V3_CONFIG2_INT_MSK			(1 << 15)
+#define NFC_V3_CONFIG2_ST_CMD(x)		(((x) & 0xff) << 24)
+#define NFC_V3_CONFIG2_SPAS(x)			(((x) & 0xff) << 16)
+
+#define NFC_V3_CONFIG3				(host->regs_ip + 0x28)
+#define NFC_V3_CONFIG3_ADD_OP(x)		(((x) & 0x3) << 0)
+#define NFC_V3_CONFIG3_FW8			(1 << 3)
+#define NFC_V3_CONFIG3_SBB(x)			(((x) & 0x7) << 8)
+#define NFC_V3_CONFIG3_NUM_OF_DEVICES(x)	(((x) & 0x7) << 12)
+#define NFC_V3_CONFIG3_RBB_MODE			(1 << 15)
+#define NFC_V3_CONFIG3_NO_SDMA			(1 << 20)
+
+#define NFC_V3_IPC			(host->regs_ip + 0x2C)
+#define NFC_V3_IPC_CREQ			(1 << 0)
+#define NFC_V3_IPC_INT			(1 << 31)
+
+#define NFC_V3_DELAY_LINE		(host->regs_ip + 0x34)
+
+struct mxc_nand_host;
+
+struct mxc_nand_devtype_data {
+	void (*preset)(struct mtd_info *);
+	void (*send_cmd)(struct mxc_nand_host *, uint16_t, int);
+	void (*send_addr)(struct mxc_nand_host *, uint16_t, int);
+	void (*send_page)(struct mtd_info *, unsigned int);
+	void (*send_read_id)(struct mxc_nand_host *);
+	uint16_t (*get_dev_status)(struct mxc_nand_host *);
+	int (*check_int)(struct mxc_nand_host *);
+	void (*irq_control)(struct mxc_nand_host *, int);
+	u32 (*get_ecc_status)(struct mxc_nand_host *);
+	struct nand_ecclayout *ecclayout_512, *ecclayout_2k, *ecclayout_4k;
+	void (*select_chip)(struct mtd_info *mtd, int chip);
+	int (*correct_data)(struct mtd_info *mtd, u_char *dat,
+			u_char *read_ecc, u_char *calc_ecc);
+
+	/*
+	 * On i.MX21 the CONFIG2:INT bit cannot be read if interrupts are masked
+	 * (CONFIG1:INT_MSK is set). To handle this the driver uses
+	 * enable_irq/disable_irq_nosync instead of CONFIG1:INT_MSK
+	 */
+	int irqpending_quirk;
+	int needs_ip;
+
+	size_t regs_offset;
+	size_t spare0_offset;
+	size_t axi_offset;
+
+	int spare_len;
+	int eccbytes;
+	int eccsize;
+	int ppb_shift;
+};
 
 struct mxc_nand_host {
 	struct mtd_info		mtd;
 	struct nand_chip	nand;
-	struct mtd_partition	*parts;
 	struct device		*dev;
 
-	void			*spare0;
-	void			*main_area0;
-	void			*main_area1;
+	void __iomem		*spare0;
+	void __iomem		*main_area0;
 
 	void __iomem		*base;
 	void __iomem		*regs;
+	void __iomem		*regs_axi;
+	void __iomem		*regs_ip;
 	int			status_request;
 	struct clk		*clk;
 	int			clk_act;
 	int			irq;
+	int			eccsize;
+	int			active_cs;
 
-	wait_queue_head_t	irq_waitq;
+	struct completion	op_completion;
 
 	uint8_t			*data_buf;
 	unsigned int		buf_start;
-	int			spare_len;
+
+	const struct mxc_nand_devtype_data *devtype_data;
+	struct mxc_nand_platform_data pdata;
 };
 
 /* OOB placement block for use with hardware ecc generation */
@@ -160,17 +242,147 @@ static struct nand_ecclayout nandv2_hw_eccoob_largepage = {
 	}
 };
 
-#ifdef CONFIG_MTD_PARTITIONS
-static const char *part_probes[] = { "RedBoot", "cmdlinepart", NULL };
-#endif
+/* OOB description for 4096 byte pages with 128 byte OOB */
+static struct nand_ecclayout nandv2_hw_eccoob_4k = {
+	.eccbytes = 8 * 9,
+	.eccpos = {
+		7,  8,  9, 10, 11, 12, 13, 14, 15,
+		23, 24, 25, 26, 27, 28, 29, 30, 31,
+		39, 40, 41, 42, 43, 44, 45, 46, 47,
+		55, 56, 57, 58, 59, 60, 61, 62, 63,
+		71, 72, 73, 74, 75, 76, 77, 78, 79,
+		87, 88, 89, 90, 91, 92, 93, 94, 95,
+		103, 104, 105, 106, 107, 108, 109, 110, 111,
+		119, 120, 121, 122, 123, 124, 125, 126, 127,
+	},
+	.oobfree = {
+		{.offset = 2, .length = 4},
+		{.offset = 16, .length = 7},
+		{.offset = 32, .length = 7},
+		{.offset = 48, .length = 7},
+		{.offset = 64, .length = 7},
+		{.offset = 80, .length = 7},
+		{.offset = 96, .length = 7},
+		{.offset = 112, .length = 7},
+	}
+};
+
+static const char * const part_probes[] = {
+	"cmdlinepart", "RedBoot", "ofpart", NULL };
+
+static void memcpy32_fromio(void *trg, const void __iomem  *src, size_t size)
+{
+	int i;
+	u32 *t = trg;
+	const __iomem u32 *s = src;
+
+	for (i = 0; i < (size >> 2); i++)
+		*t++ = __raw_readl(s++);
+}
+
+static void memcpy32_toio(void __iomem *trg, const void *src, int size)
+{
+	int i;
+	u32 __iomem *t = trg;
+	const u32 *s = src;
+
+	for (i = 0; i < (size >> 2); i++)
+		__raw_writel(*s++, t++);
+}
+
+static int check_int_v3(struct mxc_nand_host *host)
+{
+	uint32_t tmp;
+
+	tmp = readl(NFC_V3_IPC);
+	if (!(tmp & NFC_V3_IPC_INT))
+		return 0;
+
+	tmp &= ~NFC_V3_IPC_INT;
+	writel(tmp, NFC_V3_IPC);
+
+	return 1;
+}
+
+static int check_int_v1_v2(struct mxc_nand_host *host)
+{
+	uint32_t tmp;
+
+	tmp = readw(NFC_V1_V2_CONFIG2);
+	if (!(tmp & NFC_V1_V2_CONFIG2_INT))
+		return 0;
+
+	if (!host->devtype_data->irqpending_quirk)
+		writew(tmp & ~NFC_V1_V2_CONFIG2_INT, NFC_V1_V2_CONFIG2);
+
+	return 1;
+}
+
+static void irq_control_v1_v2(struct mxc_nand_host *host, int activate)
+{
+	uint16_t tmp;
+
+	tmp = readw(NFC_V1_V2_CONFIG1);
+
+	if (activate)
+		tmp &= ~NFC_V1_V2_CONFIG1_INT_MSK;
+	else
+		tmp |= NFC_V1_V2_CONFIG1_INT_MSK;
+
+	writew(tmp, NFC_V1_V2_CONFIG1);
+}
+
+static void irq_control_v3(struct mxc_nand_host *host, int activate)
+{
+	uint32_t tmp;
+
+	tmp = readl(NFC_V3_CONFIG2);
+
+	if (activate)
+		tmp &= ~NFC_V3_CONFIG2_INT_MSK;
+	else
+		tmp |= NFC_V3_CONFIG2_INT_MSK;
+
+	writel(tmp, NFC_V3_CONFIG2);
+}
+
+static void irq_control(struct mxc_nand_host *host, int activate)
+{
+	if (host->devtype_data->irqpending_quirk) {
+		if (activate)
+			enable_irq(host->irq);
+		else
+			disable_irq_nosync(host->irq);
+	} else {
+		host->devtype_data->irq_control(host, activate);
+	}
+}
+
+static u32 get_ecc_status_v1(struct mxc_nand_host *host)
+{
+	return readw(NFC_V1_V2_ECC_STATUS_RESULT);
+}
+
+static u32 get_ecc_status_v2(struct mxc_nand_host *host)
+{
+	return readl(NFC_V1_V2_ECC_STATUS_RESULT);
+}
+
+static u32 get_ecc_status_v3(struct mxc_nand_host *host)
+{
+	return readl(NFC_V3_ECC_STATUS_RESULT);
+}
 
 static irqreturn_t mxc_nfc_irq(int irq, void *dev_id)
 {
 	struct mxc_nand_host *host = dev_id;
 
-	disable_irq_nosync(irq);
+	if (!host->devtype_data->check_int(host))
+		return IRQ_NONE;
+
+	irq_control(host, 0);
 
-	wake_up(&host->irq_waitq);
+	complete(&host->op_completion);
 
 	return IRQ_HANDLED;
 }
@@ -180,86 +392,127 @@ static irqreturn_t mxc_nfc_irq(int irq, void *dev_id)
  */
 static void wait_op_done(struct mxc_nand_host *host, int useirq)
 {
-	uint16_t tmp;
 	int max_retries = 8000;
 
 	if (useirq) {
-		if ((readw(host->regs + NFC_CONFIG2) & NFC_INT) == 0) {
-
-			enable_irq(host->irq);
-
-			wait_event(host->irq_waitq,
-				readw(host->regs + NFC_CONFIG2) & NFC_INT);
-
-			tmp = readw(host->regs + NFC_CONFIG2);
-			tmp  &= ~NFC_INT;
-			writew(tmp, host->regs + NFC_CONFIG2);
+		if (!host->devtype_data->check_int(host)) {
+			reinit_completion(&host->op_completion);
+			irq_control(host, 1);
+			wait_for_completion(&host->op_completion);
 		}
 	} else {
 		while (max_retries-- > 0) {
-			if (readw(host->regs + NFC_CONFIG2) & NFC_INT) {
-				tmp = readw(host->regs + NFC_CONFIG2);
-				tmp  &= ~NFC_INT;
-				writew(tmp, host->regs + NFC_CONFIG2);
+			if (host->devtype_data->check_int(host))
 				break;
-			}
+
 			udelay(1);
 		}
 		if (max_retries < 0)
-			DEBUG(MTD_DEBUG_LEVEL0, "%s: INT not set\n",
-			      __func__);
+			pr_debug("%s: INT not set\n", __func__);
 	}
 }
 
+static void send_cmd_v3(struct mxc_nand_host *host, uint16_t cmd, int useirq)
+{
+	/* fill command */
+	writel(cmd, NFC_V3_FLASH_CMD);
+
+	/* send out command */
+	writel(NFC_CMD, NFC_V3_LAUNCH);
+
+	/* Wait for operation to complete */
+	wait_op_done(host, useirq);
+}
+
 /* This function issues the specified command to the NAND device and
  * waits for completion. */
-static void send_cmd(struct mxc_nand_host *host, uint16_t cmd, int useirq)
+static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq)
 {
-	DEBUG(MTD_DEBUG_LEVEL3, "send_cmd(host, 0x%x, %d)\n", cmd, useirq);
+	pr_debug("send_cmd(host, 0x%x, %d)\n", cmd, useirq);
 
-	writew(cmd, host->regs + NFC_FLASH_CMD);
-	writew(NFC_CMD, host->regs + NFC_CONFIG2);
+	writew(cmd, NFC_V1_V2_FLASH_CMD);
+	writew(NFC_CMD, NFC_V1_V2_CONFIG2);
 
-	if (cpu_is_mx21() && (cmd == NAND_CMD_RESET)) {
+	if (host->devtype_data->irqpending_quirk && (cmd == NAND_CMD_RESET)) {
 		int max_retries = 100;
 		/* Reset completion is indicated by NFC_CONFIG2 */
 		/* being set to 0 */
 		while (max_retries-- > 0) {
-			if (readw(host->regs + NFC_CONFIG2) == 0) {
+			if (readw(NFC_V1_V2_CONFIG2) == 0) {
 				break;
 			}
 			udelay(1);
 		}
 		if (max_retries < 0)
-			DEBUG(MTD_DEBUG_LEVEL0, "%s: RESET failed\n",
-			      __func__);
+			pr_debug("%s: RESET failed\n", __func__);
 	} else {
 		/* Wait for operation to complete */
 		wait_op_done(host, useirq);
 	}
 }
 
+static void send_addr_v3(struct mxc_nand_host *host, uint16_t addr, int islast)
+{
+	/* fill address */
+	writel(addr, NFC_V3_FLASH_ADDR0);
+
+	/* send out address */
+	writel(NFC_ADDR, NFC_V3_LAUNCH);
+
+	wait_op_done(host, 0);
+}
+
 /* This function sends an address (or partial address) to the
  * NAND device. The address is used to select the source/destination for
  * a NAND command. */
-static void send_addr(struct mxc_nand_host *host, uint16_t addr, int islast)
+static void send_addr_v1_v2(struct mxc_nand_host *host, uint16_t addr, int islast)
 {
-	DEBUG(MTD_DEBUG_LEVEL3, "send_addr(host, 0x%x %d)\n", addr, islast);
+	pr_debug("send_addr(host, 0x%x %d)\n", addr, islast);
 
-	writew(addr, host->regs + NFC_FLASH_ADDR);
-	writew(NFC_ADDR, host->regs + NFC_CONFIG2);
+	writew(addr, NFC_V1_V2_FLASH_ADDR);
+	writew(NFC_ADDR, NFC_V1_V2_CONFIG2);
 
 	/* Wait for operation to complete */
 	wait_op_done(host, islast);
 }
 
-static void send_page(struct mtd_info *mtd, unsigned int ops)
+static void send_page_v3(struct mtd_info *mtd, unsigned int ops)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
+	uint32_t tmp;
+
+	tmp = readl(NFC_V3_CONFIG1);
+	tmp &= ~(7 << 4);
+	writel(tmp, NFC_V3_CONFIG1);
+
+	/* transfer data from NFC ram to nand */
+	writel(ops, NFC_V3_LAUNCH);
+
+	wait_op_done(host, false);
+}
+
+static void send_page_v2(struct mtd_info *mtd, unsigned int ops)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
+
+	/* NANDFC buffer 0 is used for page read/write */
+	writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR);
+
+	writew(ops, NFC_V1_V2_CONFIG2);
+
+	/* Wait for operation to complete */
+	wait_op_done(host, true);
+}
+
+static void send_page_v1(struct mtd_info *mtd, unsigned int ops)
 {
 	struct nand_chip *nand_chip = mtd->priv;
 	struct mxc_nand_host *host = nand_chip->priv;
 	int bufs, i;
 
-	if (nfc_is_v1() && mtd->writesize > 512)
+	if (mtd->writesize > 512)
 		bufs = 4;
 	else
 		bufs = 1;
@@ -267,63 +520,91 @@ static void send_page(struct mtd_info *mtd, unsigned int ops)
 	for (i = 0; i < bufs; i++) {
 
 		/* NANDFC buffer 0 is used for page read/write */
-		writew(i, host->regs + NFC_BUF_ADDR);
+		writew((host->active_cs << 4) | i, NFC_V1_V2_BUF_ADDR);
 
-		writew(ops, host->regs + NFC_CONFIG2);
+		writew(ops, NFC_V1_V2_CONFIG2);
 
 		/* Wait for operation to complete */
 		wait_op_done(host, true);
 	}
 }
 
+static void send_read_id_v3(struct mxc_nand_host *host)
+{
+	struct nand_chip *this = &host->nand;
+
+	/* Read ID into main buffer */
+	writel(NFC_ID, NFC_V3_LAUNCH);
+
+	wait_op_done(host, true);
+
+	memcpy32_fromio(host->data_buf, host->main_area0, 16);
+
+	if (this->options & NAND_BUSWIDTH_16) {
+		/* compress the ID info */
+		host->data_buf[1] = host->data_buf[2];
+		host->data_buf[2] = host->data_buf[4];
+		host->data_buf[3] = host->data_buf[6];
+		host->data_buf[4] = host->data_buf[8];
+		host->data_buf[5] = host->data_buf[10];
+	}
+}
+
 /* Request the NANDFC to perform a read of the NAND device ID. */
-static void send_read_id(struct mxc_nand_host *host)
+static void send_read_id_v1_v2(struct mxc_nand_host *host)
 {
 	struct nand_chip *this = &host->nand;
 
 	/* NANDFC buffer 0 is used for device ID output */
-	writew(0x0, host->regs + NFC_BUF_ADDR);
+	writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR);
 
-	writew(NFC_ID, host->regs + NFC_CONFIG2);
+	writew(NFC_ID, NFC_V1_V2_CONFIG2);
 
 	/* Wait for operation to complete */
 	wait_op_done(host, true);
 
+	memcpy32_fromio(host->data_buf, host->main_area0, 16);
+
 	if (this->options & NAND_BUSWIDTH_16) {
-		void __iomem *main_buf = host->main_area0;
 		/* compress the ID info */
-		writeb(readb(main_buf + 2), main_buf + 1);
-		writeb(readb(main_buf + 4), main_buf + 2);
-		writeb(readb(main_buf + 6), main_buf + 3);
-		writeb(readb(main_buf + 8), main_buf + 4);
-		writeb(readb(main_buf + 10), main_buf + 5);
+		host->data_buf[1] = host->data_buf[2];
+		host->data_buf[2] = host->data_buf[4];
+		host->data_buf[3] = host->data_buf[6];
+		host->data_buf[4] = host->data_buf[8];
+		host->data_buf[5] = host->data_buf[10];
 	}
-	memcpy(host->data_buf, host->main_area0, 16);
+}
+
+static uint16_t get_dev_status_v3(struct mxc_nand_host *host)
+{
+	writew(NFC_STATUS, NFC_V3_LAUNCH);
+	wait_op_done(host, true);
+
+	return readl(NFC_V3_CONFIG1) >> 16;
 }
 
 /* This function requests the NANDFC to perform a read of the
  * NAND device status and returns the current status. */
-static uint16_t get_dev_status(struct mxc_nand_host *host)
+static uint16_t get_dev_status_v1_v2(struct mxc_nand_host *host)
 {
-	void __iomem *main_buf = host->main_area1;
+	void __iomem *main_buf = host->main_area0;
 	uint32_t store;
 	uint16_t ret;
-	/* Issue status request to NAND device */
 
-	/* store the main area1 first word, later do recovery */
-	store = readl(main_buf);
-	/* NANDFC buffer 1 is used for device status to prevent
-	 * corruption of read/write buffer on status requests. */
-	writew(1, host->regs + NFC_BUF_ADDR);
+	writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR);
 
-	writew(NFC_STATUS, host->regs + NFC_CONFIG2);
+	/*
+	 * The device status is stored in main_area0. To
+	 * prevent corruption of the buffer save the value
+	 * and restore it afterwards.
+	 */
+	store = readl(main_buf);
 
-	/* Wait for operation to complete */
+	writew(NFC_STATUS, NFC_V1_V2_CONFIG2);
 	wait_op_done(host, true);
 
-	/* Status is placed in first word of main buffer */
-	/* get status, then recovery area 1 data */
 	ret = readw(main_buf);
+
 	writel(store, main_buf);
 
 	return ret;
@@ -347,7 +628,7 @@ static void mxc_nand_enable_hwecc(struct mtd_info *mtd, int mode)
 	 */
 }
 
-static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat,
+static int mxc_nand_correct_data_v1(struct mtd_info *mtd, u_char *dat,
 				 u_char *read_ecc, u_char *calc_ecc)
 {
 	struct nand_chip *nand_chip = mtd->priv;
@@ -358,17 +639,49 @@ static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat,
 	 * additional correction.  2-Bit errors cannot be corrected by
 	 * HW ECC, so we need to return failure
 	 */
-	uint16_t ecc_status = readw(host->regs + NFC_ECC_STATUS_RESULT);
+	uint16_t ecc_status = get_ecc_status_v1(host);
 
 	if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) {
-		DEBUG(MTD_DEBUG_LEVEL0,
-		      "MXC_NAND: HWECC uncorrectable 2-bit ECC error\n");
+		pr_debug("MXC_NAND: HWECC uncorrectable 2-bit ECC error\n");
 		return -1;
 	}
 
 	return 0;
 }
 
+static int mxc_nand_correct_data_v2_v3(struct mtd_info *mtd, u_char *dat,
+				 u_char *read_ecc, u_char *calc_ecc)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
+	u32 ecc_stat, err;
+	int no_subpages = 1;
+	int ret = 0;
+	u8 ecc_bit_mask, err_limit;
+
+	ecc_bit_mask = (host->eccsize == 4) ? 0x7 : 0xf;
+	err_limit = (host->eccsize == 4) ? 0x4 : 0x8;
+
+	no_subpages = mtd->writesize >> 9;
+
+	ecc_stat = host->devtype_data->get_ecc_status(host);
+
+	do {
+		err = ecc_stat & ecc_bit_mask;
+		if (err > err_limit) {
+			printk(KERN_WARNING "UnCorrectable RS-ECC Error\n");
+			return -1;
+		} else {
+			ret += err;
+		}
+		ecc_stat >>= 4;
+	} while (--no_subpages);
+
+	pr_debug("%d Symbol Correctable RS-ECC Error\n", ret);
+
+	return ret;
+}
+
 static int mxc_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
 				  u_char *ecc_code)
 {
@@ -383,7 +696,7 @@ static u_char mxc_nand_read_byte(struct mtd_info *mtd)
 
 	/* Check for status request */
 	if (host->status_request)
-		return get_dev_status(host) & 0xFF;
+		return host->devtype_data->get_dev_status(host) & 0xFF;
 
 	ret = *(uint8_t *)(host->data_buf + host->buf_start);
 	host->buf_start++;
@@ -434,45 +747,56 @@ static void mxc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 
 	n = min(n, len);
 
-	memcpy(buf, host->data_buf + col, len);
+	memcpy(buf, host->data_buf + col, n);
 
-	host->buf_start += len;
-}
-
-/* Used by the upper layer to verify the data in NAND Flash
- * with the data in the buf. */
-static int mxc_nand_verify_buf(struct mtd_info *mtd,
-				const u_char *buf, int len)
-{
-	return -EFAULT;
+	host->buf_start += n;
 }
 
 /* This function is used by upper layer for select and
  * deselect of the NAND chip */
-static void mxc_nand_select_chip(struct mtd_info *mtd, int chip)
+static void mxc_nand_select_chip_v1_v3(struct mtd_info *mtd, int chip)
 {
 	struct nand_chip *nand_chip = mtd->priv;
 	struct mxc_nand_host *host = nand_chip->priv;
 
-	switch (chip) {
-	case -1:
+	if (chip == -1) {
 		/* Disable the NFC clock */
 		if (host->clk_act) {
-			clk_disable(host->clk);
+			clk_disable_unprepare(host->clk);
 			host->clk_act = 0;
 		}
-		break;
-	case 0:
+		return;
+	}
+
+	if (!host->clk_act) {
 		/* Enable the NFC clock */
-		if (!host->clk_act) {
-			clk_enable(host->clk);
-			host->clk_act = 1;
+		clk_prepare_enable(host->clk);
+		host->clk_act = 1;
+	}
+}
+
+static void mxc_nand_select_chip_v2(struct mtd_info *mtd, int chip)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
+
+	if (chip == -1) {
+		/* Disable the NFC clock */
+		if (host->clk_act) {
+			clk_disable_unprepare(host->clk);
+			host->clk_act = 0;
 		}
-		break;
+		return;
+	}
 
-	default:
-		break;
+	if (!host->clk_act) {
+		/* Enable the NFC clock */
+		clk_prepare_enable(host->clk);
+		host->clk_act = 1;
 	}
+
+	host->active_cs = chip;
+	writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR);
 }
 
 /*
@@ -485,23 +809,23 @@ static void copy_spare(struct mtd_info *mtd, bool bfrom)
 	u16 i, j;
 	u16 n = mtd->writesize >> 9;
 	u8 *d = host->data_buf + mtd->writesize;
-	u8 *s = host->spare0;
-	u16 t = host->spare_len;
+	u8 __iomem *s = host->spare0;
+	u16 t = host->devtype_data->spare_len;
 
 	j = (mtd->oobsize / n >> 1) << 1;
 
 	if (bfrom) {
 		for (i = 0; i < n - 1; i++)
-			memcpy(d + i * j, s + i * t, j);
+			memcpy32_fromio(d + i * j, s + i * t, j);
 
 		/* the last section */
-		memcpy(d + i * j, s + i * t, mtd->oobsize - i * j);
+		memcpy32_fromio(d + i * j, s + i * t, mtd->oobsize - i * j);
 	} else {
 		for (i = 0; i < n - 1; i++)
-			memcpy(&s[i * t], &d[i * j], j);
+			memcpy32_toio(&s[i * t], &d[i * j], j);
 
 		/* the last section */
-		memcpy(&s[i * t], &d[i * j], mtd->oobsize - i * j);
+		memcpy32_toio(&s[i * t], &d[i * j], mtd->oobsize - i * j);
 	}
 }
 
@@ -515,75 +839,209 @@ static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr)
 		/*
 		 * MXC NANDFC can only perform full page+spare or
 		 * spare-only read/write.  When the upper layers
-		 * layers perform a read/write buf operation,
-		 * we will used the saved column address to index into
-		 * the full page.
+		 * perform a read/write buf operation, the saved column
+		  * address is used to index into the full page.
 		 */
-		send_addr(host, 0, page_addr == -1);
+		host->devtype_data->send_addr(host, 0, page_addr == -1);
 		if (mtd->writesize > 512)
 			/* another col addr cycle for 2k page */
-			send_addr(host, 0, false);
+			host->devtype_data->send_addr(host, 0, false);
 	}
 
 	/* Write out page address, if necessary */
 	if (page_addr != -1) {
 		/* paddr_0 - p_addr_7 */
-		send_addr(host, (page_addr & 0xff), false);
+		host->devtype_data->send_addr(host, (page_addr & 0xff), false);
 
 		if (mtd->writesize > 512) {
 			if (mtd->size >= 0x10000000) {
 				/* paddr_8 - paddr_15 */
-				send_addr(host, (page_addr >> 8) & 0xff, false);
-				send_addr(host, (page_addr >> 16) & 0xff, true);
+				host->devtype_data->send_addr(host,
+						(page_addr >> 8) & 0xff,
+						false);
+				host->devtype_data->send_addr(host,
+						(page_addr >> 16) & 0xff,
+						true);
 			} else
 				/* paddr_8 - paddr_15 */
-				send_addr(host, (page_addr >> 8) & 0xff, true);
+				host->devtype_data->send_addr(host,
+						(page_addr >> 8) & 0xff, true);
 		} else {
 			/* One more address cycle for higher density devices */
 			if (mtd->size >= 0x4000000) {
 				/* paddr_8 - paddr_15 */
-				send_addr(host, (page_addr >> 8) & 0xff, false);
-				send_addr(host, (page_addr >> 16) & 0xff, true);
+				host->devtype_data->send_addr(host,
+						(page_addr >> 8) & 0xff,
+						false);
+				host->devtype_data->send_addr(host,
+						(page_addr >> 16) & 0xff,
+						true);
 			} else
 				/* paddr_8 - paddr_15 */
-				send_addr(host, (page_addr >> 8) & 0xff, true);
+				host->devtype_data->send_addr(host,
+						(page_addr >> 8) & 0xff, true);
 		}
 	}
 }
 
-static void preset(struct mtd_info *mtd)
+/*
+ * v2 and v3 type controllers can do 4bit or 8bit ecc depending
+ * on how much oob the nand chip has. For 8bit ecc we need at least
+ * 26 bytes of oob data per 512 byte block.
+ */
+static int get_eccsize(struct mtd_info *mtd)
+{
+	int oobbytes_per_512 = 0;
+
+	oobbytes_per_512 = mtd->oobsize * 512 / mtd->writesize;
+
+	if (oobbytes_per_512 < 26)
+		return 4;
+	else
+		return 8;
+}
+
+static void preset_v1(struct mtd_info *mtd)
 {
 	struct nand_chip *nand_chip = mtd->priv;
 	struct mxc_nand_host *host = nand_chip->priv;
-	uint16_t tmp;
+	uint16_t config1 = 0;
+
+	if (nand_chip->ecc.mode == NAND_ECC_HW)
+		config1 |= NFC_V1_V2_CONFIG1_ECC_EN;
+
+	if (!host->devtype_data->irqpending_quirk)
+		config1 |= NFC_V1_V2_CONFIG1_INT_MSK;
+
+	host->eccsize = 1;
+
+	writew(config1, NFC_V1_V2_CONFIG1);
+	/* preset operation */
+
+	/* Unlock the internal RAM Buffer */
+	writew(0x2, NFC_V1_V2_CONFIG);
+
+	/* Blocks to be unlocked */
+	writew(0x0, NFC_V1_UNLOCKSTART_BLKADDR);
+	writew(0xffff, NFC_V1_UNLOCKEND_BLKADDR);
+
+	/* Unlock Block Command for given address range */
+	writew(0x4, NFC_V1_V2_WRPROT);
+}
+
+static void preset_v2(struct mtd_info *mtd)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
+	uint16_t config1 = 0;
+
+	if (nand_chip->ecc.mode == NAND_ECC_HW)
+		config1 |= NFC_V1_V2_CONFIG1_ECC_EN;
 
-	/* enable interrupt, disable spare enable */
-	tmp = readw(host->regs + NFC_CONFIG1);
-	tmp &= ~NFC_INT_MSK;
-	tmp &= ~NFC_SP_EN;
-	if (nand_chip->ecc.mode == NAND_ECC_HW) {
-		tmp |= NFC_ECC_EN;
+	config1 |= NFC_V2_CONFIG1_FP_INT;
+
+	if (!host->devtype_data->irqpending_quirk)
+		config1 |= NFC_V1_V2_CONFIG1_INT_MSK;
+
+	if (mtd->writesize) {
+		uint16_t pages_per_block = mtd->erasesize / mtd->writesize;
+
+		host->eccsize = get_eccsize(mtd);
+		if (host->eccsize == 4)
+			config1 |= NFC_V2_CONFIG1_ECC_MODE_4;
+
+		config1 |= NFC_V2_CONFIG1_PPB(ffs(pages_per_block) - 6);
 	} else {
-		tmp &= ~NFC_ECC_EN;
+		host->eccsize = 1;
 	}
-	writew(tmp, host->regs + NFC_CONFIG1);
+
+	writew(config1, NFC_V1_V2_CONFIG1);
 	/* preset operation */
 
 	/* Unlock the internal RAM Buffer */
-	writew(0x2, host->regs + NFC_CONFIG);
+	writew(0x2, NFC_V1_V2_CONFIG);
 
 	/* Blocks to be unlocked */
-	if (nfc_is_v21()) {
-		writew(0x0, host->regs + NFC_V21_UNLOCKSTART_BLKADDR);
-		writew(0xffff, host->regs + NFC_V21_UNLOCKEND_BLKADDR);
-	} else if (nfc_is_v1()) {
-		writew(0x0, host->regs + NFC_V1_UNLOCKSTART_BLKADDR);
-		writew(0x4000, host->regs + NFC_V1_UNLOCKEND_BLKADDR);
-	} else
-		BUG();
+	writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR0);
+	writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR1);
+	writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR2);
+	writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR3);
+	writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR0);
+	writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR1);
+	writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR2);
+	writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR3);
 
 	/* Unlock Block Command for given address range */
-	writew(0x4, host->regs + NFC_WRPROT);
+	writew(0x4, NFC_V1_V2_WRPROT);
+}
+
+static void preset_v3(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct mxc_nand_host *host = chip->priv;
+	uint32_t config2, config3;
+	int i, addr_phases;
+
+	writel(NFC_V3_CONFIG1_RBA(0), NFC_V3_CONFIG1);
+	writel(NFC_V3_IPC_CREQ, NFC_V3_IPC);
+
+	/* Unlock the internal RAM Buffer */
+	writel(NFC_V3_WRPROT_BLS_UNLOCK | NFC_V3_WRPROT_UNLOCK,
+			NFC_V3_WRPROT);
+
+	/* Blocks to be unlocked */
+	for (i = 0; i < NAND_MAX_CHIPS; i++)
+		writel(0x0 |	(0xffff << 16),
+				NFC_V3_WRPROT_UNLOCK_BLK_ADD0 + (i << 2));
+
+	writel(0, NFC_V3_IPC);
+
+	config2 = NFC_V3_CONFIG2_ONE_CYCLE |
+		NFC_V3_CONFIG2_2CMD_PHASES |
+		NFC_V3_CONFIG2_SPAS(mtd->oobsize >> 1) |
+		NFC_V3_CONFIG2_ST_CMD(0x70) |
+		NFC_V3_CONFIG2_INT_MSK |
+		NFC_V3_CONFIG2_NUM_ADDR_PHASE0;
+
+	if (chip->ecc.mode == NAND_ECC_HW)
+		config2 |= NFC_V3_CONFIG2_ECC_EN;
+
+	addr_phases = fls(chip->pagemask) >> 3;
+
+	if (mtd->writesize == 2048) {
+		config2 |= NFC_V3_CONFIG2_PS_2048;
+		config2 |= NFC_V3_CONFIG2_NUM_ADDR_PHASE1(addr_phases);
+	} else if (mtd->writesize == 4096) {
+		config2 |= NFC_V3_CONFIG2_PS_4096;
+		config2 |= NFC_V3_CONFIG2_NUM_ADDR_PHASE1(addr_phases);
+	} else {
+		config2 |= NFC_V3_CONFIG2_PS_512;
+		config2 |= NFC_V3_CONFIG2_NUM_ADDR_PHASE1(addr_phases - 1);
+	}
+
+	if (mtd->writesize) {
+		config2 |= NFC_V3_CONFIG2_PPB(
+				ffs(mtd->erasesize / mtd->writesize) - 6,
+				host->devtype_data->ppb_shift);
+		host->eccsize = get_eccsize(mtd);
+		if (host->eccsize == 8)
+			config2 |= NFC_V3_CONFIG2_ECC_MODE_8;
+	}
+
+	writel(config2, NFC_V3_CONFIG2);
+
+	config3 = NFC_V3_CONFIG3_NUM_OF_DEVICES(0) |
+			NFC_V3_CONFIG3_NO_SDMA |
+			NFC_V3_CONFIG3_RBB_MODE |
+			NFC_V3_CONFIG3_SBB(6) | /* Reset default */
+			NFC_V3_CONFIG3_ADD_OP(0);
+
+	if (!(chip->options & NAND_BUSWIDTH_16))
+		config3 |= NFC_V3_CONFIG3_FW8;
+
+	writel(config3, NFC_V3_CONFIG3);
+
+	writel(0, NFC_V3_DELAY_LINE);
 }
 
 /* Used by the upper layer to write command to NAND Flash for
@@ -594,8 +1052,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 	struct nand_chip *nand_chip = mtd->priv;
 	struct mxc_nand_host *host = nand_chip->priv;
 
-	DEBUG(MTD_DEBUG_LEVEL3,
-	      "mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
+	pr_debug("mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
 	      command, column, page_addr);
 
 	/* Reset command state information */
@@ -604,15 +1061,15 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 	/* Command pre-processing step */
 	switch (command) {
 	case NAND_CMD_RESET:
-		send_cmd(host, command, false);
-		preset(mtd);
+		host->devtype_data->preset(mtd);
+		host->devtype_data->send_cmd(host, command, false);
 		break;
 
 	case NAND_CMD_STATUS:
 		host->buf_start = 0;
 		host->status_request = true;
 
-		send_cmd(host, command, true);
+		host->devtype_data->send_cmd(host, command, true);
 		mxc_do_addr_cycle(mtd, column, page_addr);
 		break;
 
@@ -623,70 +1080,51 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 		else
 			host->buf_start = column + mtd->writesize;
 
-		if (mtd->writesize > 512)
-			command = NAND_CMD_READ0; /* only READ0 is valid */
+		command = NAND_CMD_READ0; /* only READ0 is valid */
 
-		send_cmd(host, command, false);
+		host->devtype_data->send_cmd(host, command, false);
 		mxc_do_addr_cycle(mtd, column, page_addr);
 
 		if (mtd->writesize > 512)
-			send_cmd(host, NAND_CMD_READSTART, true);
+			host->devtype_data->send_cmd(host,
+					NAND_CMD_READSTART, true);
 
-		send_page(mtd, NFC_OUTPUT);
+		host->devtype_data->send_page(mtd, NFC_OUTPUT);
 
-		memcpy(host->data_buf, host->main_area0, mtd->writesize);
+		memcpy32_fromio(host->data_buf, host->main_area0,
+				mtd->writesize);
 		copy_spare(mtd, true);
 		break;
 
 	case NAND_CMD_SEQIN:
-		if (column >= mtd->writesize) {
-			/*
-			 * FIXME: before send SEQIN command for write OOB,
-			 * We must read one page out.
-			 * For K9F1GXX has no READ1 command to set current HW
-			 * pointer to spare area, we must write the whole page
-			 * including OOB together.
-			 */
-			if (mtd->writesize > 512)
-				/* call ourself to read a page */
-				mxc_nand_command(mtd, NAND_CMD_READ0, 0,
-						page_addr);
-
-			host->buf_start = column;
-
-			/* Set program pointer to spare region */
-			if (mtd->writesize == 512)
-				send_cmd(host, NAND_CMD_READOOB, false);
-		} else {
-			host->buf_start = column;
+		if (column >= mtd->writesize)
+			/* call ourself to read a page */
+			mxc_nand_command(mtd, NAND_CMD_READ0, 0, page_addr);
 
-			/* Set program pointer to page start */
-			if (mtd->writesize == 512)
-				send_cmd(host, NAND_CMD_READ0, false);
-		}
+		host->buf_start = column;
 
-		send_cmd(host, command, false);
+		host->devtype_data->send_cmd(host, command, false);
 		mxc_do_addr_cycle(mtd, column, page_addr);
 		break;
 
 	case NAND_CMD_PAGEPROG:
-		memcpy(host->main_area0, host->data_buf, mtd->writesize);
+		memcpy32_toio(host->main_area0, host->data_buf, mtd->writesize);
 		copy_spare(mtd, false);
-		send_page(mtd, NFC_INPUT);
-		send_cmd(host, command, true);
+		host->devtype_data->send_page(mtd, NFC_INPUT);
+		host->devtype_data->send_cmd(host, command, true);
 		mxc_do_addr_cycle(mtd, column, page_addr);
 		break;
 
 	case NAND_CMD_READID:
-		send_cmd(host, command, true);
+		host->devtype_data->send_cmd(host, command, true);
 		mxc_do_addr_cycle(mtd, column, page_addr);
-		send_read_id(host);
+		host->devtype_data->send_read_id(host);
 		host->buf_start = column;
 		break;
 
 	case NAND_CMD_ERASE1:
 	case NAND_CMD_ERASE2:
-		send_cmd(host, command, false);
+		host->devtype_data->send_cmd(host, command, false);
 		mxc_do_addr_cycle(mtd, column, page_addr);
 
 		break;
@@ -720,23 +1158,256 @@ static struct nand_bbt_descr bbt_mirror_descr = {
 	.pattern = mirror_pattern,
 };
 
-static int __init mxcnd_probe(struct platform_device *pdev)
+/* v1 + irqpending_quirk: i.MX21 */
+static const struct mxc_nand_devtype_data imx21_nand_devtype_data = {
+	.preset = preset_v1,
+	.send_cmd = send_cmd_v1_v2,
+	.send_addr = send_addr_v1_v2,
+	.send_page = send_page_v1,
+	.send_read_id = send_read_id_v1_v2,
+	.get_dev_status = get_dev_status_v1_v2,
+	.check_int = check_int_v1_v2,
+	.irq_control = irq_control_v1_v2,
+	.get_ecc_status = get_ecc_status_v1,
+	.ecclayout_512 = &nandv1_hw_eccoob_smallpage,
+	.ecclayout_2k = &nandv1_hw_eccoob_largepage,
+	.ecclayout_4k = &nandv1_hw_eccoob_smallpage, /* XXX: needs fix */
+	.select_chip = mxc_nand_select_chip_v1_v3,
+	.correct_data = mxc_nand_correct_data_v1,
+	.irqpending_quirk = 1,
+	.needs_ip = 0,
+	.regs_offset = 0xe00,
+	.spare0_offset = 0x800,
+	.spare_len = 16,
+	.eccbytes = 3,
+	.eccsize = 1,
+};
+
+/* v1 + !irqpending_quirk: i.MX27, i.MX31 */
+static const struct mxc_nand_devtype_data imx27_nand_devtype_data = {
+	.preset = preset_v1,
+	.send_cmd = send_cmd_v1_v2,
+	.send_addr = send_addr_v1_v2,
+	.send_page = send_page_v1,
+	.send_read_id = send_read_id_v1_v2,
+	.get_dev_status = get_dev_status_v1_v2,
+	.check_int = check_int_v1_v2,
+	.irq_control = irq_control_v1_v2,
+	.get_ecc_status = get_ecc_status_v1,
+	.ecclayout_512 = &nandv1_hw_eccoob_smallpage,
+	.ecclayout_2k = &nandv1_hw_eccoob_largepage,
+	.ecclayout_4k = &nandv1_hw_eccoob_smallpage, /* XXX: needs fix */
+	.select_chip = mxc_nand_select_chip_v1_v3,
+	.correct_data = mxc_nand_correct_data_v1,
+	.irqpending_quirk = 0,
+	.needs_ip = 0,
+	.regs_offset = 0xe00,
+	.spare0_offset = 0x800,
+	.axi_offset = 0,
+	.spare_len = 16,
+	.eccbytes = 3,
+	.eccsize = 1,
+};
+
+/* v21: i.MX25, i.MX35 */
+static const struct mxc_nand_devtype_data imx25_nand_devtype_data = {
+	.preset = preset_v2,
+	.send_cmd = send_cmd_v1_v2,
+	.send_addr = send_addr_v1_v2,
+	.send_page = send_page_v2,
+	.send_read_id = send_read_id_v1_v2,
+	.get_dev_status = get_dev_status_v1_v2,
+	.check_int = check_int_v1_v2,
+	.irq_control = irq_control_v1_v2,
+	.get_ecc_status = get_ecc_status_v2,
+	.ecclayout_512 = &nandv2_hw_eccoob_smallpage,
+	.ecclayout_2k = &nandv2_hw_eccoob_largepage,
+	.ecclayout_4k = &nandv2_hw_eccoob_4k,
+	.select_chip = mxc_nand_select_chip_v2,
+	.correct_data = mxc_nand_correct_data_v2_v3,
+	.irqpending_quirk = 0,
+	.needs_ip = 0,
+	.regs_offset = 0x1e00,
+	.spare0_offset = 0x1000,
+	.axi_offset = 0,
+	.spare_len = 64,
+	.eccbytes = 9,
+	.eccsize = 0,
+};
+
+/* v3.2a: i.MX51 */
+static const struct mxc_nand_devtype_data imx51_nand_devtype_data = {
+	.preset = preset_v3,
+	.send_cmd = send_cmd_v3,
+	.send_addr = send_addr_v3,
+	.send_page = send_page_v3,
+	.send_read_id = send_read_id_v3,
+	.get_dev_status = get_dev_status_v3,
+	.check_int = check_int_v3,
+	.irq_control = irq_control_v3,
+	.get_ecc_status = get_ecc_status_v3,
+	.ecclayout_512 = &nandv2_hw_eccoob_smallpage,
+	.ecclayout_2k = &nandv2_hw_eccoob_largepage,
+	.ecclayout_4k = &nandv2_hw_eccoob_smallpage, /* XXX: needs fix */
+	.select_chip = mxc_nand_select_chip_v1_v3,
+	.correct_data = mxc_nand_correct_data_v2_v3,
+	.irqpending_quirk = 0,
+	.needs_ip = 1,
+	.regs_offset = 0,
+	.spare0_offset = 0x1000,
+	.axi_offset = 0x1e00,
+	.spare_len = 64,
+	.eccbytes = 0,
+	.eccsize = 0,
+	.ppb_shift = 7,
+};
+
+/* v3.2b: i.MX53 */
+static const struct mxc_nand_devtype_data imx53_nand_devtype_data = {
+	.preset = preset_v3,
+	.send_cmd = send_cmd_v3,
+	.send_addr = send_addr_v3,
+	.send_page = send_page_v3,
+	.send_read_id = send_read_id_v3,
+	.get_dev_status = get_dev_status_v3,
+	.check_int = check_int_v3,
+	.irq_control = irq_control_v3,
+	.get_ecc_status = get_ecc_status_v3,
+	.ecclayout_512 = &nandv2_hw_eccoob_smallpage,
+	.ecclayout_2k = &nandv2_hw_eccoob_largepage,
+	.ecclayout_4k = &nandv2_hw_eccoob_smallpage, /* XXX: needs fix */
+	.select_chip = mxc_nand_select_chip_v1_v3,
+	.correct_data = mxc_nand_correct_data_v2_v3,
+	.irqpending_quirk = 0,
+	.needs_ip = 1,
+	.regs_offset = 0,
+	.spare0_offset = 0x1000,
+	.axi_offset = 0x1e00,
+	.spare_len = 64,
+	.eccbytes = 0,
+	.eccsize = 0,
+	.ppb_shift = 8,
+};
+
+static inline int is_imx21_nfc(struct mxc_nand_host *host)
+{
+	return host->devtype_data == &imx21_nand_devtype_data;
+}
+
+static inline int is_imx27_nfc(struct mxc_nand_host *host)
+{
+	return host->devtype_data == &imx27_nand_devtype_data;
+}
+
+static inline int is_imx25_nfc(struct mxc_nand_host *host)
+{
+	return host->devtype_data == &imx25_nand_devtype_data;
+}
+
+static inline int is_imx51_nfc(struct mxc_nand_host *host)
+{
+	return host->devtype_data == &imx51_nand_devtype_data;
+}
+
+static inline int is_imx53_nfc(struct mxc_nand_host *host)
+{
+	return host->devtype_data == &imx53_nand_devtype_data;
+}
+
+static struct platform_device_id mxcnd_devtype[] = {
+	{
+		.name = "imx21-nand",
+		.driver_data = (kernel_ulong_t) &imx21_nand_devtype_data,
+	}, {
+		.name = "imx27-nand",
+		.driver_data = (kernel_ulong_t) &imx27_nand_devtype_data,
+	}, {
+		.name = "imx25-nand",
+		.driver_data = (kernel_ulong_t) &imx25_nand_devtype_data,
+	}, {
+		.name = "imx51-nand",
+		.driver_data = (kernel_ulong_t) &imx51_nand_devtype_data,
+	}, {
+		.name = "imx53-nand",
+		.driver_data = (kernel_ulong_t) &imx53_nand_devtype_data,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(platform, mxcnd_devtype);
+
+#ifdef CONFIG_OF_MTD
+static const struct of_device_id mxcnd_dt_ids[] = {
+	{
+		.compatible = "fsl,imx21-nand",
+		.data = &imx21_nand_devtype_data,
+	}, {
+		.compatible = "fsl,imx27-nand",
+		.data = &imx27_nand_devtype_data,
+	}, {
+		.compatible = "fsl,imx25-nand",
+		.data = &imx25_nand_devtype_data,
+	}, {
+		.compatible = "fsl,imx51-nand",
+		.data = &imx51_nand_devtype_data,
+	}, {
+		.compatible = "fsl,imx53-nand",
+		.data = &imx53_nand_devtype_data,
+	},
+	{ /* sentinel */ }
+};
+
+static int __init mxcnd_probe_dt(struct mxc_nand_host *host)
+{
+	struct device_node *np = host->dev->of_node;
+	struct mxc_nand_platform_data *pdata = &host->pdata;
+	const struct of_device_id *of_id =
+		of_match_device(mxcnd_dt_ids, host->dev);
+	int buswidth;
+
+	if (!np)
+		return 1;
+
+	if (of_get_nand_ecc_mode(np) >= 0)
+		pdata->hw_ecc = 1;
+
+	pdata->flash_bbt = of_get_nand_on_flash_bbt(np);
+
+	buswidth = of_get_nand_bus_width(np);
+	if (buswidth < 0)
+		return buswidth;
+
+	pdata->width = buswidth / 8;
+
+	host->devtype_data = of_id->data;
+
+	return 0;
+}
+#else
+static int __init mxcnd_probe_dt(struct mxc_nand_host *host)
+{
+	return 1;
+}
+#endif
+
+static int mxcnd_probe(struct platform_device *pdev)
 {
 	struct nand_chip *this;
 	struct mtd_info *mtd;
-	struct mxc_nand_platform_data *pdata = pdev->dev.platform_data;
 	struct mxc_nand_host *host;
 	struct resource *res;
-	int err = 0, nr_parts = 0;
-	struct nand_ecclayout *oob_smallpage, *oob_largepage;
+	int err = 0;
 
 	/* Allocate memory for MTD device structure and private data */
-	host = kzalloc(sizeof(struct mxc_nand_host) + NAND_MAX_PAGESIZE +
-			NAND_MAX_OOBSIZE, GFP_KERNEL);
+	host = devm_kzalloc(&pdev->dev, sizeof(struct mxc_nand_host),
+			GFP_KERNEL);
 	if (!host)
 		return -ENOMEM;
 
-	host->data_buf = (uint8_t *)(host + 1);
+	/* allocate a temporary buffer for the nand_scan_ident() */
+	host->data_buf = devm_kzalloc(&pdev->dev, PAGE_SIZE, GFP_KERNEL);
+	if (!host->data_buf)
+		return -ENOMEM;
 
 	host->dev = &pdev->dev;
 	/* structures must be linked */
@@ -753,93 +1424,142 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 	this->priv = host;
 	this->dev_ready = mxc_nand_dev_ready;
 	this->cmdfunc = mxc_nand_command;
-	this->select_chip = mxc_nand_select_chip;
 	this->read_byte = mxc_nand_read_byte;
 	this->read_word = mxc_nand_read_word;
 	this->write_buf = mxc_nand_write_buf;
 	this->read_buf = mxc_nand_read_buf;
-	this->verify_buf = mxc_nand_verify_buf;
 
-	host->clk = clk_get(&pdev->dev, "nfc");
-	if (IS_ERR(host->clk)) {
-		err = PTR_ERR(host->clk);
-		goto eclk;
+	host->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(host->clk))
+		return PTR_ERR(host->clk);
+
+	err = mxcnd_probe_dt(host);
+	if (err > 0) {
+		struct mxc_nand_platform_data *pdata =
+					dev_get_platdata(&pdev->dev);
+		if (pdata) {
+			host->pdata = *pdata;
+			host->devtype_data = (struct mxc_nand_devtype_data *)
+						pdev->id_entry->driver_data;
+		} else {
+			err = -ENODEV;
+		}
 	}
+	if (err < 0)
+		return err;
 
-	clk_enable(host->clk);
-	host->clk_act = 1;
+	if (host->devtype_data->needs_ip) {
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		host->regs_ip = devm_ioremap_resource(&pdev->dev, res);
+		if (IS_ERR(host->regs_ip))
+			return PTR_ERR(host->regs_ip);
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		err = -ENODEV;
-		goto eres;
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	} else {
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	}
 
-	host->base = ioremap(res->start, resource_size(res));
-	if (!host->base) {
-		err = -ENOMEM;
-		goto eres;
-	}
+	host->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(host->base))
+		return PTR_ERR(host->base);
 
 	host->main_area0 = host->base;
-	host->main_area1 = host->base + 0x200;
-
-	if (nfc_is_v21()) {
-		host->regs = host->base + 0x1000;
-		host->spare0 = host->base + 0x1000;
-		host->spare_len = 64;
-		oob_smallpage = &nandv2_hw_eccoob_smallpage;
-		oob_largepage = &nandv2_hw_eccoob_largepage;
-		this->ecc.bytes = 9;
-	} else if (nfc_is_v1()) {
-		host->regs = host->base;
-		host->spare0 = host->base + 0x800;
-		host->spare_len = 16;
-		oob_smallpage = &nandv1_hw_eccoob_smallpage;
-		oob_largepage = &nandv1_hw_eccoob_largepage;
-		this->ecc.bytes = 3;
-	} else
-		BUG();
 
+	if (host->devtype_data->regs_offset)
+		host->regs = host->base + host->devtype_data->regs_offset;
+	host->spare0 = host->base + host->devtype_data->spare0_offset;
+	if (host->devtype_data->axi_offset)
+		host->regs_axi = host->base + host->devtype_data->axi_offset;
+
+	this->ecc.bytes = host->devtype_data->eccbytes;
+	host->eccsize = host->devtype_data->eccsize;
+
+	this->select_chip = host->devtype_data->select_chip;
 	this->ecc.size = 512;
-	this->ecc.layout = oob_smallpage;
+	this->ecc.layout = host->devtype_data->ecclayout_512;
 
-	if (pdata->hw_ecc) {
+	if (host->pdata.hw_ecc) {
 		this->ecc.calculate = mxc_nand_calculate_ecc;
 		this->ecc.hwctl = mxc_nand_enable_hwecc;
-		this->ecc.correct = mxc_nand_correct_data;
+		this->ecc.correct = host->devtype_data->correct_data;
 		this->ecc.mode = NAND_ECC_HW;
 	} else {
 		this->ecc.mode = NAND_ECC_SOFT;
 	}
 
-	/* NAND bus width determines access funtions used by upper layer */
-	if (pdata->width == 2)
+	/* NAND bus width determines access functions used by upper layer */
+	if (host->pdata.width == 2)
 		this->options |= NAND_BUSWIDTH_16;
 
-	if (pdata->flash_bbt) {
+	if (host->pdata.flash_bbt) {
 		this->bbt_td = &bbt_main_descr;
 		this->bbt_md = &bbt_mirror_descr;
 		/* update flash based bbt */
-		this->options |= NAND_USE_FLASH_BBT;
+		this->bbt_options |= NAND_BBT_USE_FLASH;
 	}
 
-	init_waitqueue_head(&host->irq_waitq);
+	init_completion(&host->op_completion);
 
 	host->irq = platform_get_irq(pdev, 0);
+	if (host->irq < 0)
+		return host->irq;
 
-	err = request_irq(host->irq, mxc_nfc_irq, IRQF_DISABLED, DRIVER_NAME, host);
+	/*
+	 * Use host->devtype_data->irq_control() here instead of irq_control()
+	 * because we must not disable_irq_nosync without having requested the
+	 * irq.
+	 */
+	host->devtype_data->irq_control(host, 0);
+
+	err = devm_request_irq(&pdev->dev, host->irq, mxc_nfc_irq,
+			0, DRIVER_NAME, host);
 	if (err)
-		goto eirq;
+		return err;
+
+	err = clk_prepare_enable(host->clk);
+	if (err)
+		return err;
+	host->clk_act = 1;
+
+	/*
+	 * Now that we "own" the interrupt make sure the interrupt mask bit is
+	 * cleared on i.MX21. Otherwise we can't read the interrupt status bit
+	 * on this machine.
+	 */
+	if (host->devtype_data->irqpending_quirk) {
+		disable_irq_nosync(host->irq);
+		host->devtype_data->irq_control(host, 1);
+	}
 
 	/* first scan to find the device and get the page size */
-	if (nand_scan_ident(mtd, 1, NULL)) {
+	if (nand_scan_ident(mtd, is_imx25_nfc(host) ? 4 : 1, NULL)) {
 		err = -ENXIO;
 		goto escan;
 	}
 
+	/* allocate the right size buffer now */
+	devm_kfree(&pdev->dev, (void *)host->data_buf);
+	host->data_buf = devm_kzalloc(&pdev->dev, mtd->writesize + mtd->oobsize,
+					GFP_KERNEL);
+	if (!host->data_buf) {
+		err = -ENOMEM;
+		goto escan;
+	}
+
+	/* Call preset again, with correct writesize this time */
+	host->devtype_data->preset(mtd);
+
 	if (mtd->writesize == 2048)
-		this->ecc.layout = oob_largepage;
+		this->ecc.layout = host->devtype_data->ecclayout_2k;
+	else if (mtd->writesize == 4096)
+		this->ecc.layout = host->devtype_data->ecclayout_4k;
+
+	if (this->ecc.mode == NAND_ECC_HW) {
+		if (is_imx21_nfc(host) || is_imx27_nfc(host))
+			this->ecc.strength = 1;
+		else
+			this->ecc.strength = (host->eccsize == 4) ? 4 : 8;
+	}
 
 	/* second phase scan */
 	if (nand_scan_tail(mtd)) {
@@ -848,112 +1568,46 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 	}
 
 	/* Register the partitions */
-#ifdef CONFIG_MTD_PARTITIONS
-	nr_parts =
-	    parse_mtd_partitions(mtd, part_probes, &host->parts, 0);
-	if (nr_parts > 0)
-		add_mtd_partitions(mtd, host->parts, nr_parts);
-	else
-#endif
-	{
-		pr_info("Registering %s as whole device\n", mtd->name);
-		add_mtd_device(mtd);
-	}
+	mtd_device_parse_register(mtd, part_probes,
+			&(struct mtd_part_parser_data){
+				.of_node = pdev->dev.of_node,
+			},
+			host->pdata.parts,
+			host->pdata.nr_parts);
 
 	platform_set_drvdata(pdev, host);
 
 	return 0;
 
 escan:
-	free_irq(host->irq, host);
-eirq:
-	iounmap(host->base);
-eres:
-	clk_put(host->clk);
-eclk:
-	kfree(host);
+	if (host->clk_act)
+		clk_disable_unprepare(host->clk);
 
 	return err;
 }
 
-static int __devexit mxcnd_remove(struct platform_device *pdev)
+static int mxcnd_remove(struct platform_device *pdev)
 {
 	struct mxc_nand_host *host = platform_get_drvdata(pdev);
 
-	clk_put(host->clk);
-
-	platform_set_drvdata(pdev, NULL);
-
 	nand_release(&host->mtd);
-	free_irq(host->irq, host);
-	iounmap(host->base);
-	kfree(host);
+	if (host->clk_act)
+		clk_disable_unprepare(host->clk);
 
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int mxcnd_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	struct mtd_info *mtd = platform_get_drvdata(pdev);
-	struct nand_chip *nand_chip = mtd->priv;
-	struct mxc_nand_host *host = nand_chip->priv;
-	int ret = 0;
-
-	DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND suspend\n");
-
-	ret = mtd->suspend(mtd);
-
-	/*
-	 * nand_suspend locks the device for exclusive access, so
-	 * the clock must already be off.
-	 */
-	BUG_ON(!ret && host->clk_act);
-
-	return ret;
-}
-
-static int mxcnd_resume(struct platform_device *pdev)
-{
-	struct mtd_info *mtd = platform_get_drvdata(pdev);
-	struct nand_chip *nand_chip = mtd->priv;
-	struct mxc_nand_host *host = nand_chip->priv;
-	int ret = 0;
-
-	DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND resume\n");
-
-	mtd->resume(mtd);
-
-	return ret;
-}
-
-#else
-# define mxcnd_suspend   NULL
-# define mxcnd_resume    NULL
-#endif				/* CONFIG_PM */
-
 static struct platform_driver mxcnd_driver = {
 	.driver = {
 		   .name = DRIVER_NAME,
-		   },
-	.remove = __devexit_p(mxcnd_remove),
-	.suspend = mxcnd_suspend,
-	.resume = mxcnd_resume,
+		   .owner = THIS_MODULE,
+		   .of_match_table = of_match_ptr(mxcnd_dt_ids),
+	},
+	.id_table = mxcnd_devtype,
+	.probe = mxcnd_probe,
+	.remove = mxcnd_remove,
 };
-
-static int __init mxc_nd_init(void)
-{
-	return platform_driver_probe(&mxcnd_driver, mxcnd_probe);
-}
-
-static void __exit mxc_nd_cleanup(void)
-{
-	/* Unregister the device structure */
-	platform_driver_unregister(&mxcnd_driver);
-}
-
-module_init(mxc_nd_init);
-module_exit(mxc_nd_cleanup);
+module_platform_driver(mxcnd_driver);
 
 MODULE_AUTHOR("Freescale Semiconductor, Inc.");
 MODULE_DESCRIPTION("MXC NAND MTD driver");
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 4a7b86423ee..4f3e80c68a2 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -4,7 +4,6 @@
  *  Overview:
  *   This is the generic MTD driver for NAND flash devices. It should be
  *   capable of working with almost all NAND chips currently available.
- *   Basic support for AG-AND chips is provided.
  *
  *	Additional technical information is available on
  *	http://www.linux-mtd.infradead.org/doc/nand.html
@@ -21,9 +20,7 @@
  *  TODO:
  *	Enable cached programming for 2k page size chips
  *	Check, if mtd->ecctype should be set to MTD_ECC_HW
- *	if we have HW ecc support.
- *	The AG-AND chips have nice features for speed improvement,
- *	which are not supported yet. Read / program 4 pages in one go.
+ *	if we have HW ECC support.
  *	BBT table is not serialized, has to be fixed
  *
  * This program is free software; you can redistribute it and/or modify
@@ -32,25 +29,25 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
+#include <linux/mm.h>
 #include <linux/types.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/compatmac.h>
+#include <linux/mtd/nand_bch.h>
 #include <linux/interrupt.h>
 #include <linux/bitops.h>
 #include <linux/leds.h>
-#include <asm/io.h>
-
-#ifdef CONFIG_MTD_PARTITIONS
+#include <linux/io.h>
 #include <linux/mtd/partitions.h>
-#endif
 
 /* Define default oob placement schemes for large and small page devices */
 static struct nand_ecclayout nand_oob_8 = {
@@ -60,7 +57,7 @@ static struct nand_ecclayout nand_oob_8 = {
 		{.offset = 3,
 		 .length = 2},
 		{.offset = 6,
-		 .length = 2}}
+		 .length = 2} }
 };
 
 static struct nand_ecclayout nand_oob_16 = {
@@ -68,7 +65,7 @@ static struct nand_ecclayout nand_oob_16 = {
 	.eccpos = {0, 1, 2, 3, 6, 7},
 	.oobfree = {
 		{.offset = 8,
-		 . length = 8}}
+		 . length = 8} }
 };
 
 static struct nand_ecclayout nand_oob_64 = {
@@ -79,7 +76,7 @@ static struct nand_ecclayout nand_oob_64 = {
 		   56, 57, 58, 59, 60, 61, 62, 63},
 	.oobfree = {
 		{.offset = 2,
-		 .length = 38}}
+		 .length = 38} }
 };
 
 static struct nand_ecclayout nand_oob_128 = {
@@ -93,11 +90,10 @@ static struct nand_ecclayout nand_oob_128 = {
 		   120, 121, 122, 123, 124, 125, 126, 127},
 	.oobfree = {
 		{.offset = 2,
-		 .length = 78}}
+		 .length = 78} }
 };
 
-static int nand_get_device(struct nand_chip *chip, struct mtd_info *mtd,
-			   int new_state);
+static int nand_get_device(struct mtd_info *mtd, int new_state);
 
 static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
 			     struct mtd_oob_ops *ops);
@@ -115,22 +111,14 @@ static int check_offs_len(struct mtd_info *mtd,
 	int ret = 0;
 
 	/* Start address must align on block boundary */
-	if (ofs & ((1 << chip->phys_erase_shift) - 1)) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: Unaligned address\n", __func__);
+	if (ofs & ((1ULL << chip->phys_erase_shift) - 1)) {
+		pr_debug("%s: unaligned address\n", __func__);
 		ret = -EINVAL;
 	}
 
 	/* Length must align on block boundary */
-	if (len & ((1 << chip->phys_erase_shift) - 1)) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: Length not block aligned\n",
-					__func__);
-		ret = -EINVAL;
-	}
-
-	/* Do not allow past end of device */
-	if (ofs + len > mtd->size) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: Past end of device\n",
-					__func__);
+	if (len & ((1ULL << chip->phys_erase_shift) - 1)) {
+		pr_debug("%s: length not block aligned\n", __func__);
 		ret = -EINVAL;
 	}
 
@@ -139,17 +127,14 @@ static int check_offs_len(struct mtd_info *mtd,
 
 /**
  * nand_release_device - [GENERIC] release chip
- * @mtd:	MTD device structure
+ * @mtd: MTD device structure
  *
- * Deselect, release chip lock and wake up anyone waiting on the device
+ * Release chip lock and wake up anyone waiting on the device.
  */
 static void nand_release_device(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd->priv;
 
-	/* De-select the NAND device */
-	chip->select_chip(mtd, -1);
-
 	/* Release the controller and the chip */
 	spin_lock(&chip->controller->lock);
 	chip->controller->active = NULL;
@@ -160,9 +145,9 @@ static void nand_release_device(struct mtd_info *mtd)
 
 /**
  * nand_read_byte - [DEFAULT] read one byte from the chip
- * @mtd:	MTD device structure
+ * @mtd: MTD device structure
  *
- * Default read function for 8bit buswith
+ * Default read function for 8bit buswidth
  */
 static uint8_t nand_read_byte(struct mtd_info *mtd)
 {
@@ -171,11 +156,12 @@ static uint8_t nand_read_byte(struct mtd_info *mtd)
 }
 
 /**
- * nand_read_byte16 - [DEFAULT] read one byte endianess aware from the chip
- * @mtd:	MTD device structure
+ * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip
+ * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip
+ * @mtd: MTD device structure
+ *
+ * Default read function for 16bit buswidth with endianness conversion.
  *
- * Default read function for 16bit buswith with
- * endianess conversion
  */
 static uint8_t nand_read_byte16(struct mtd_info *mtd)
 {
@@ -185,10 +171,9 @@ static uint8_t nand_read_byte16(struct mtd_info *mtd)
 
 /**
  * nand_read_word - [DEFAULT] read one word from the chip
- * @mtd:	MTD device structure
+ * @mtd: MTD device structure
  *
- * Default read function for 16bit buswith without
- * endianess conversion
+ * Default read function for 16bit buswidth without endianness conversion.
  */
 static u16 nand_read_word(struct mtd_info *mtd)
 {
@@ -198,8 +183,8 @@ static u16 nand_read_word(struct mtd_info *mtd)
 
 /**
  * nand_select_chip - [DEFAULT] control CE line
- * @mtd:	MTD device structure
- * @chipnr:	chipnumber to select, -1 for deselect
+ * @mtd: MTD device structure
+ * @chipnr: chipnumber to select, -1 for deselect
  *
  * Default select function for 1 chip devices.
  */
@@ -220,134 +205,127 @@ static void nand_select_chip(struct mtd_info *mtd, int chipnr)
 }
 
 /**
- * nand_write_buf - [DEFAULT] write buffer to chip
- * @mtd:	MTD device structure
- * @buf:	data buffer
- * @len:	number of bytes to write
+ * nand_write_byte - [DEFAULT] write single byte to chip
+ * @mtd: MTD device structure
+ * @byte: value to write
  *
- * Default write function for 8bit buswith
+ * Default function to write a byte to I/O[7:0]
  */
-static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+static void nand_write_byte(struct mtd_info *mtd, uint8_t byte)
 {
-	int i;
 	struct nand_chip *chip = mtd->priv;
 
-	for (i = 0; i < len; i++)
-		writeb(buf[i], chip->IO_ADDR_W);
+	chip->write_buf(mtd, &byte, 1);
 }
 
 /**
- * nand_read_buf - [DEFAULT] read chip data into buffer
- * @mtd:	MTD device structure
- * @buf:	buffer to store date
- * @len:	number of bytes to read
+ * nand_write_byte16 - [DEFAULT] write single byte to a chip with width 16
+ * @mtd: MTD device structure
+ * @byte: value to write
  *
- * Default read function for 8bit buswith
+ * Default function to write a byte to I/O[7:0] on a 16-bit wide chip.
  */
-static void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+static void nand_write_byte16(struct mtd_info *mtd, uint8_t byte)
 {
-	int i;
 	struct nand_chip *chip = mtd->priv;
+	uint16_t word = byte;
 
-	for (i = 0; i < len; i++)
-		buf[i] = readb(chip->IO_ADDR_R);
+	/*
+	 * It's not entirely clear what should happen to I/O[15:8] when writing
+	 * a byte. The ONFi spec (Revision 3.1; 2012-09-19, Section 2.16) reads:
+	 *
+	 *    When the host supports a 16-bit bus width, only data is
+	 *    transferred at the 16-bit width. All address and command line
+	 *    transfers shall use only the lower 8-bits of the data bus. During
+	 *    command transfers, the host may place any value on the upper
+	 *    8-bits of the data bus. During address transfers, the host shall
+	 *    set the upper 8-bits of the data bus to 00h.
+	 *
+	 * One user of the write_byte callback is nand_onfi_set_features. The
+	 * four parameters are specified to be written to I/O[7:0], but this is
+	 * neither an address nor a command transfer. Let's assume a 0 on the
+	 * upper I/O lines is OK.
+	 */
+	chip->write_buf(mtd, (uint8_t *)&word, 2);
 }
 
 /**
- * nand_verify_buf - [DEFAULT] Verify chip data against buffer
- * @mtd:	MTD device structure
- * @buf:	buffer containing the data to compare
- * @len:	number of bytes to compare
+ * nand_write_buf - [DEFAULT] write buffer to chip
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
  *
- * Default verify function for 8bit buswith
+ * Default write function for 8bit buswidth.
  */
-static int nand_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
 {
-	int i;
 	struct nand_chip *chip = mtd->priv;
 
-	for (i = 0; i < len; i++)
-		if (buf[i] != readb(chip->IO_ADDR_R))
-			return -EFAULT;
-	return 0;
+	iowrite8_rep(chip->IO_ADDR_W, buf, len);
 }
 
 /**
- * nand_write_buf16 - [DEFAULT] write buffer to chip
- * @mtd:	MTD device structure
- * @buf:	data buffer
- * @len:	number of bytes to write
+ * nand_read_buf - [DEFAULT] read chip data into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
  *
- * Default write function for 16bit buswith
+ * Default read function for 8bit buswidth.
  */
-static void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
+static void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
 {
-	int i;
 	struct nand_chip *chip = mtd->priv;
-	u16 *p = (u16 *) buf;
-	len >>= 1;
-
-	for (i = 0; i < len; i++)
-		writew(p[i], chip->IO_ADDR_W);
 
+	ioread8_rep(chip->IO_ADDR_R, buf, len);
 }
 
 /**
- * nand_read_buf16 - [DEFAULT] read chip data into buffer
- * @mtd:	MTD device structure
- * @buf:	buffer to store date
- * @len:	number of bytes to read
+ * nand_write_buf16 - [DEFAULT] write buffer to chip
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
  *
- * Default read function for 16bit buswith
+ * Default write function for 16bit buswidth.
  */
-static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
+static void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
 {
-	int i;
 	struct nand_chip *chip = mtd->priv;
 	u16 *p = (u16 *) buf;
-	len >>= 1;
 
-	for (i = 0; i < len; i++)
-		p[i] = readw(chip->IO_ADDR_R);
+	iowrite16_rep(chip->IO_ADDR_W, p, len >> 1);
 }
 
 /**
- * nand_verify_buf16 - [DEFAULT] Verify chip data against buffer
- * @mtd:	MTD device structure
- * @buf:	buffer containing the data to compare
- * @len:	number of bytes to compare
+ * nand_read_buf16 - [DEFAULT] read chip data into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
  *
- * Default verify function for 16bit buswith
+ * Default read function for 16bit buswidth.
  */
-static int nand_verify_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
+static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
 {
-	int i;
 	struct nand_chip *chip = mtd->priv;
 	u16 *p = (u16 *) buf;
-	len >>= 1;
-
-	for (i = 0; i < len; i++)
-		if (p[i] != readw(chip->IO_ADDR_R))
-			return -EFAULT;
 
-	return 0;
+	ioread16_rep(chip->IO_ADDR_R, p, len >> 1);
 }
 
 /**
  * nand_block_bad - [DEFAULT] Read bad block marker from the chip
- * @mtd:	MTD device structure
- * @ofs:	offset from device start
- * @getchip:	0, if the chip is already selected
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+ * @getchip: 0, if the chip is already selected
  *
  * Check, if the block is bad.
  */
 static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
 {
-	int page, chipnr, res = 0;
+	int page, chipnr, res = 0, i = 0;
 	struct nand_chip *chip = mtd->priv;
 	u16 bad;
 
-	if (chip->options & NAND_BB_LAST_PAGE)
+	if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
 		ofs += mtd->erasesize - mtd->writesize;
 
 	page = (int)(ofs >> chip->page_shift) & chip->pagemask;
@@ -355,75 +333,131 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
 	if (getchip) {
 		chipnr = (int)(ofs >> chip->chip_shift);
 
-		nand_get_device(chip, mtd, FL_READING);
+		nand_get_device(mtd, FL_READING);
 
 		/* Select the NAND device */
 		chip->select_chip(mtd, chipnr);
 	}
 
-	if (chip->options & NAND_BUSWIDTH_16) {
-		chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos & 0xFE,
-			      page);
-		bad = cpu_to_le16(chip->read_word(mtd));
-		if (chip->badblockpos & 0x1)
-			bad >>= 8;
-		else
-			bad &= 0xFF;
-	} else {
-		chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos, page);
-		bad = chip->read_byte(mtd);
-	}
+	do {
+		if (chip->options & NAND_BUSWIDTH_16) {
+			chip->cmdfunc(mtd, NAND_CMD_READOOB,
+					chip->badblockpos & 0xFE, page);
+			bad = cpu_to_le16(chip->read_word(mtd));
+			if (chip->badblockpos & 0x1)
+				bad >>= 8;
+			else
+				bad &= 0xFF;
+		} else {
+			chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos,
+					page);
+			bad = chip->read_byte(mtd);
+		}
 
-	if (likely(chip->badblockbits == 8))
-		res = bad != 0xFF;
-	else
-		res = hweight8(bad) < chip->badblockbits;
+		if (likely(chip->badblockbits == 8))
+			res = bad != 0xFF;
+		else
+			res = hweight8(bad) < chip->badblockbits;
+		ofs += mtd->writesize;
+		page = (int)(ofs >> chip->page_shift) & chip->pagemask;
+		i++;
+	} while (!res && i < 2 && (chip->bbt_options & NAND_BBT_SCAN2NDPAGE));
 
-	if (getchip)
+	if (getchip) {
+		chip->select_chip(mtd, -1);
 		nand_release_device(mtd);
+	}
 
 	return res;
 }
 
 /**
- * nand_default_block_markbad - [DEFAULT] mark a block bad
- * @mtd:	MTD device structure
- * @ofs:	offset from device start
+ * nand_default_block_markbad - [DEFAULT] mark a block bad via bad block marker
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
  *
- * This is the default implementation, which can be overridden by
- * a hardware specific driver.
-*/
+ * This is the default implementation, which can be overridden by a hardware
+ * specific driver. It provides the details for writing a bad block marker to a
+ * block.
+ */
 static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
 {
 	struct nand_chip *chip = mtd->priv;
+	struct mtd_oob_ops ops;
 	uint8_t buf[2] = { 0, 0 };
-	int block, ret;
+	int ret = 0, res, i = 0;
 
-	if (chip->options & NAND_BB_LAST_PAGE)
+	ops.datbuf = NULL;
+	ops.oobbuf = buf;
+	ops.ooboffs = chip->badblockpos;
+	if (chip->options & NAND_BUSWIDTH_16) {
+		ops.ooboffs &= ~0x01;
+		ops.len = ops.ooblen = 2;
+	} else {
+		ops.len = ops.ooblen = 1;
+	}
+	ops.mode = MTD_OPS_PLACE_OOB;
+
+	/* Write to first/last page(s) if necessary */
+	if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
 		ofs += mtd->erasesize - mtd->writesize;
+	do {
+		res = nand_do_write_oob(mtd, ofs, &ops);
+		if (!ret)
+			ret = res;
 
-	/* Get block number */
-	block = (int)(ofs >> chip->bbt_erase_shift);
-	if (chip->bbt)
-		chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
+		i++;
+		ofs += mtd->writesize;
+	} while ((chip->bbt_options & NAND_BBT_SCAN2NDPAGE) && i < 2);
 
-	/* Do we have a flash based bad block table ? */
-	if (chip->options & NAND_USE_FLASH_BBT)
-		ret = nand_update_bbt(mtd, ofs);
-	else {
-		/* We write two bytes, so we dont have to mess with 16 bit
-		 * access
-		 */
-		nand_get_device(chip, mtd, FL_WRITING);
-		ofs += mtd->oobsize;
-		chip->ops.len = chip->ops.ooblen = 2;
-		chip->ops.datbuf = NULL;
-		chip->ops.oobbuf = buf;
-		chip->ops.ooboffs = chip->badblockpos & ~0x01;
-
-		ret = nand_do_write_oob(mtd, ofs, &chip->ops);
+	return ret;
+}
+
+/**
+ * nand_block_markbad_lowlevel - mark a block bad
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+ *
+ * This function performs the generic NAND bad block marking steps (i.e., bad
+ * block table(s) and/or marker(s)). We only allow the hardware driver to
+ * specify how to write bad block markers to OOB (chip->block_markbad).
+ *
+ * We try operations in the following order:
+ *  (1) erase the affected block, to allow OOB marker to be written cleanly
+ *  (2) write bad block marker to OOB area of affected block (unless flag
+ *      NAND_BBT_NO_OOB_BBM is present)
+ *  (3) update the BBT
+ * Note that we retain the first error encountered in (2) or (3), finish the
+ * procedures, and dump the error in the end.
+*/
+static int nand_block_markbad_lowlevel(struct mtd_info *mtd, loff_t ofs)
+{
+	struct nand_chip *chip = mtd->priv;
+	int res, ret = 0;
+
+	if (!(chip->bbt_options & NAND_BBT_NO_OOB_BBM)) {
+		struct erase_info einfo;
+
+		/* Attempt erase before marking OOB */
+		memset(&einfo, 0, sizeof(einfo));
+		einfo.mtd = mtd;
+		einfo.addr = ofs;
+		einfo.len = 1ULL << chip->phys_erase_shift;
+		nand_erase_nand(mtd, &einfo, 0);
+
+		/* Write bad block marker to OOB */
+		nand_get_device(mtd, FL_WRITING);
+		ret = chip->block_markbad(mtd, ofs);
 		nand_release_device(mtd);
 	}
+
+	/* Mark block bad in BBT */
+	if (chip->bbt) {
+		res = nand_markbad_bbt(mtd, ofs);
+		if (!ret)
+			ret = res;
+	}
+
 	if (!ret)
 		mtd->ecc_stats.badblocks++;
 
@@ -432,16 +466,16 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
 
 /**
  * nand_check_wp - [GENERIC] check if the chip is write protected
- * @mtd:	MTD device structure
- * Check, if the device is write protected
+ * @mtd: MTD device structure
  *
- * The function expects, that the device is already selected
+ * Check, if the device is write protected. The function expects, that the
+ * device is already selected.
  */
 static int nand_check_wp(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd->priv;
 
-	/* broken xD cards report WP despite being writable */
+	/* Broken xD cards report WP despite being writable */
 	if (chip->options & NAND_BROKEN_XD)
 		return 0;
 
@@ -452,10 +486,10 @@ static int nand_check_wp(struct mtd_info *mtd)
 
 /**
  * nand_block_checkbad - [GENERIC] Check if a block is marked bad
- * @mtd:	MTD device structure
- * @ofs:	offset from device start
- * @getchip:	0, if the chip is already selected
- * @allowbbt:	1, if its allowed to access the bbt area
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+ * @getchip: 0, if the chip is already selected
+ * @allowbbt: 1, if its allowed to access the bbt area
  *
  * Check, if the block is bad. Either by reading the bad block table or
  * calling of the scan function.
@@ -474,8 +508,8 @@ static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip,
 
 /**
  * panic_nand_wait_ready - [GENERIC] Wait for the ready pin after commands.
- * @mtd:	MTD device structure
- * @timeo:	Timeout
+ * @mtd: MTD device structure
+ * @timeo: Timeout
  *
  * Helper function for nand_wait_ready used when needing to wait in interrupt
  * context.
@@ -494,21 +528,18 @@ static void panic_nand_wait_ready(struct mtd_info *mtd, unsigned long timeo)
 	}
 }
 
-/*
- * Wait for the ready pin, after a command
- * The timeout is catched later.
- */
+/* Wait for the ready pin, after a command. The timeout is caught later. */
 void nand_wait_ready(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd->priv;
-	unsigned long timeo = jiffies + 2;
+	unsigned long timeo = jiffies + msecs_to_jiffies(20);
 
 	/* 400ms timeout */
 	if (in_interrupt() || oops_in_progress)
 		return panic_nand_wait_ready(mtd, 400);
 
 	led_trigger_event(nand_led_trigger, LED_FULL);
-	/* wait until command is processed or timeout occures */
+	/* Wait until command is processed or timeout occurs */
 	do {
 		if (chip->dev_ready(mtd))
 			break;
@@ -520,13 +551,13 @@ EXPORT_SYMBOL_GPL(nand_wait_ready);
 
 /**
  * nand_command - [DEFAULT] Send command to NAND device
- * @mtd:	MTD device structure
- * @command:	the command to be sent
- * @column:	the column address for this command, -1 if none
- * @page_addr:	the page address for this command, -1 if none
+ * @mtd: MTD device structure
+ * @command: the command to be sent
+ * @column: the column address for this command, -1 if none
+ * @page_addr: the page address for this command, -1 if none
  *
- * Send command to NAND device. This function is used for small page
- * devices (256/512 Bytes per page)
+ * Send command to NAND device. This function is used for small page devices
+ * (512 Bytes per page).
  */
 static void nand_command(struct mtd_info *mtd, unsigned int command,
 			 int column, int page_addr)
@@ -534,9 +565,7 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
 	register struct nand_chip *chip = mtd->priv;
 	int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE;
 
-	/*
-	 * Write out the command to the device.
-	 */
+	/* Write out the command to the device */
 	if (command == NAND_CMD_SEQIN) {
 		int readcmd;
 
@@ -556,14 +585,13 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
 	}
 	chip->cmd_ctrl(mtd, command, ctrl);
 
-	/*
-	 * Address cycle, when necessary
-	 */
+	/* Address cycle, when necessary */
 	ctrl = NAND_CTRL_ALE | NAND_CTRL_CHANGE;
 	/* Serially input address */
 	if (column != -1) {
 		/* Adjust columns for 16 bit buswidth */
-		if (chip->options & NAND_BUSWIDTH_16)
+		if (chip->options & NAND_BUSWIDTH_16 &&
+				!nand_opcode_8bits(command))
 			column >>= 1;
 		chip->cmd_ctrl(mtd, column, ctrl);
 		ctrl &= ~NAND_CTRL_CHANGE;
@@ -579,8 +607,8 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
 	chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
 
 	/*
-	 * program and erase have their own busy handlers
-	 * status and sequential in needs no delay
+	 * Program and erase have their own busy handlers status and sequential
+	 * in needs no delay
 	 */
 	switch (command) {
 
@@ -599,7 +627,8 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
 			       NAND_CTRL_CLE | NAND_CTRL_CHANGE);
 		chip->cmd_ctrl(mtd,
 			       NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
-		while (!(chip->read_byte(mtd) & NAND_STATUS_READY)) ;
+		while (!(chip->read_byte(mtd) & NAND_STATUS_READY))
+				;
 		return;
 
 		/* This applies to read commands */
@@ -613,8 +642,10 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
 			return;
 		}
 	}
-	/* Apply this short delay always to ensure that we do wait tWB in
-	 * any case on any machine. */
+	/*
+	 * Apply this short delay always to ensure that we do wait tWB in
+	 * any case on any machine.
+	 */
 	ndelay(100);
 
 	nand_wait_ready(mtd);
@@ -622,14 +653,14 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
 
 /**
  * nand_command_lp - [DEFAULT] Send command to NAND large page device
- * @mtd:	MTD device structure
- * @command:	the command to be sent
- * @column:	the column address for this command, -1 if none
- * @page_addr:	the page address for this command, -1 if none
+ * @mtd: MTD device structure
+ * @command: the command to be sent
+ * @column: the column address for this command, -1 if none
+ * @page_addr: the page address for this command, -1 if none
  *
  * Send command to NAND device. This is the version for the new large page
- * devices We dont have the separate regions as we have in the small page
- * devices.  We must emulate NAND_CMD_READOOB to keep the code compatible.
+ * devices. We don't have the separate regions as we have in the small page
+ * devices. We must emulate NAND_CMD_READOOB to keep the code compatible.
  */
 static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
 			    int column, int page_addr)
@@ -643,8 +674,7 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
 	}
 
 	/* Command latch cycle */
-	chip->cmd_ctrl(mtd, command & 0xff,
-		       NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
+	chip->cmd_ctrl(mtd, command, NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
 
 	if (column != -1 || page_addr != -1) {
 		int ctrl = NAND_CTRL_CHANGE | NAND_NCE | NAND_ALE;
@@ -652,7 +682,8 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
 		/* Serially input address */
 		if (column != -1) {
 			/* Adjust columns for 16 bit buswidth */
-			if (chip->options & NAND_BUSWIDTH_16)
+			if (chip->options & NAND_BUSWIDTH_16 &&
+					!nand_opcode_8bits(command))
 				column >>= 1;
 			chip->cmd_ctrl(mtd, column, ctrl);
 			ctrl &= ~NAND_CTRL_CHANGE;
@@ -671,8 +702,8 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
 	chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
 
 	/*
-	 * program and erase have their own busy handlers
-	 * status, sequential in, and deplete1 need no delay
+	 * Program and erase have their own busy handlers status, sequential
+	 * in, and deplete1 need no delay.
 	 */
 	switch (command) {
 
@@ -683,18 +714,6 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
 	case NAND_CMD_SEQIN:
 	case NAND_CMD_RNDIN:
 	case NAND_CMD_STATUS:
-	case NAND_CMD_DEPLETE1:
-		return;
-
-		/*
-		 * read error status commands require only a short delay
-		 */
-	case NAND_CMD_STATUS_ERROR:
-	case NAND_CMD_STATUS_ERROR0:
-	case NAND_CMD_STATUS_ERROR1:
-	case NAND_CMD_STATUS_ERROR2:
-	case NAND_CMD_STATUS_ERROR3:
-		udelay(chip->chip_delay);
 		return;
 
 	case NAND_CMD_RESET:
@@ -705,7 +724,8 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
 			       NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
 		chip->cmd_ctrl(mtd, NAND_CMD_NONE,
 			       NAND_NCE | NAND_CTRL_CHANGE);
-		while (!(chip->read_byte(mtd) & NAND_STATUS_READY)) ;
+		while (!(chip->read_byte(mtd) & NAND_STATUS_READY))
+				;
 		return;
 
 	case NAND_CMD_RNDOUT:
@@ -726,7 +746,7 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
 	default:
 		/*
 		 * If we don't have access to the busy pin, we apply the given
-		 * command delay
+		 * command delay.
 		 */
 		if (!chip->dev_ready) {
 			udelay(chip->chip_delay);
@@ -734,8 +754,10 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
 		}
 	}
 
-	/* Apply this short delay always to ensure that we do wait tWB in
-	 * any case on any machine. */
+	/*
+	 * Apply this short delay always to ensure that we do wait tWB in
+	 * any case on any machine.
+	 */
 	ndelay(100);
 
 	nand_wait_ready(mtd);
@@ -743,35 +765,35 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
 
 /**
  * panic_nand_get_device - [GENERIC] Get chip for selected access
- * @chip:	the nand chip descriptor
- * @mtd:	MTD device structure
- * @new_state:	the state which is requested
+ * @chip: the nand chip descriptor
+ * @mtd: MTD device structure
+ * @new_state: the state which is requested
  *
  * Used when in panic, no locks are taken.
  */
 static void panic_nand_get_device(struct nand_chip *chip,
 		      struct mtd_info *mtd, int new_state)
 {
-	/* Hardware controller shared among independend devices */
+	/* Hardware controller shared among independent devices */
 	chip->controller->active = chip;
 	chip->state = new_state;
 }
 
 /**
  * nand_get_device - [GENERIC] Get chip for selected access
- * @chip:	the nand chip descriptor
- * @mtd:	MTD device structure
- * @new_state:	the state which is requested
+ * @mtd: MTD device structure
+ * @new_state: the state which is requested
  *
  * Get the device and lock it for exclusive access
  */
 static int
-nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state)
+nand_get_device(struct mtd_info *mtd, int new_state)
 {
+	struct nand_chip *chip = mtd->priv;
 	spinlock_t *lock = &chip->controller->lock;
 	wait_queue_head_t *wq = &chip->controller->wq;
 	DECLARE_WAITQUEUE(wait, current);
- retry:
+retry:
 	spin_lock(lock);
 
 	/* Hardware controller shared among independent devices */
@@ -799,14 +821,14 @@ nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state)
 }
 
 /**
- * panic_nand_wait - [GENERIC]  wait until the command is done
- * @mtd:	MTD device structure
- * @chip:	NAND chip structure
- * @timeo:	Timeout
+ * panic_nand_wait - [GENERIC] wait until the command is done
+ * @mtd: MTD device structure
+ * @chip: NAND chip structure
+ * @timeo: timeout
  *
  * Wait for command done. This is a helper function for nand_wait used when
  * we are in interrupt context. May happen when in panic and trying to write
- * an oops trough mtdoops.
+ * an oops through mtdoops.
  */
 static void panic_nand_wait(struct mtd_info *mtd, struct nand_chip *chip,
 			    unsigned long timeo)
@@ -821,43 +843,38 @@ static void panic_nand_wait(struct mtd_info *mtd, struct nand_chip *chip,
 				break;
 		}
 		mdelay(1);
-        }
+	}
 }
 
 /**
- * nand_wait - [DEFAULT]  wait until the command is done
- * @mtd:	MTD device structure
- * @chip:	NAND chip structure
+ * nand_wait - [DEFAULT] wait until the command is done
+ * @mtd: MTD device structure
+ * @chip: NAND chip structure
  *
- * Wait for command done. This applies to erase and program only
- * Erase can take up to 400ms and program up to 20ms according to
- * general NAND and SmartMedia specs
+ * Wait for command done. This applies to erase and program only. Erase can
+ * take up to 400ms and program up to 20ms according to general NAND and
+ * SmartMedia specs.
  */
 static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
 {
 
-	unsigned long timeo = jiffies;
 	int status, state = chip->state;
-
-	if (state == FL_ERASING)
-		timeo += (HZ * 400) / 1000;
-	else
-		timeo += (HZ * 20) / 1000;
+	unsigned long timeo = (state == FL_ERASING ? 400 : 20);
 
 	led_trigger_event(nand_led_trigger, LED_FULL);
 
-	/* Apply this short delay always to ensure that we do wait tWB in
-	 * any case on any machine. */
+	/*
+	 * Apply this short delay always to ensure that we do wait tWB in any
+	 * case on any machine.
+	 */
 	ndelay(100);
 
-	if ((state == FL_ERASING) && (chip->options & NAND_IS_AND))
-		chip->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1);
-	else
-		chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
+	chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
 
 	if (in_interrupt() || oops_in_progress)
 		panic_nand_wait(mtd, chip, timeo);
 	else {
+		timeo = jiffies + msecs_to_jiffies(timeo);
 		while (time_before(jiffies, timeo)) {
 			if (chip->dev_ready) {
 				if (chip->dev_ready(mtd))
@@ -872,21 +889,22 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
 	led_trigger_event(nand_led_trigger, LED_OFF);
 
 	status = (int)chip->read_byte(mtd);
+	/* This can happen if in case of timeout or buggy dev_ready */
+	WARN_ON(!(status & NAND_STATUS_READY));
 	return status;
 }
 
 /**
- * __nand_unlock - [REPLACABLE] unlocks specified locked blockes
- *
- * @param mtd - mtd info
- * @param ofs - offset to start unlock from
- * @param len - length to unlock
- * @invert -  when = 0, unlock the range of blocks within the lower and
- *                      upper boundary address
- *            whne = 1, unlock the range of blocks outside the boundaries
- *                      of the lower and upper boundary address
+ * __nand_unlock - [REPLACEABLE] unlocks specified locked blocks
+ * @mtd: mtd info
+ * @ofs: offset to start unlock from
+ * @len: length to unlock
+ * @invert: when = 0, unlock the range of blocks within the lower and
+ *                    upper boundary address
+ *          when = 1, unlock the range of blocks outside the boundaries
+ *                    of the lower and upper boundary address
  *
- * @return - unlock status
+ * Returs unlock status.
  */
 static int __nand_unlock(struct mtd_info *mtd, loff_t ofs,
 					uint64_t len, int invert)
@@ -906,10 +924,9 @@ static int __nand_unlock(struct mtd_info *mtd, loff_t ofs,
 
 	/* Call wait ready function */
 	status = chip->waitfunc(mtd, chip);
-	udelay(1000);
 	/* See if device thinks it succeeded */
-	if (status & 0x01) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: Error status = 0x%08x\n",
+	if (status & NAND_STATUS_FAIL) {
+		pr_debug("%s: error status = 0x%08x\n",
 					__func__, status);
 		ret = -EIO;
 	}
@@ -918,13 +935,12 @@ static int __nand_unlock(struct mtd_info *mtd, loff_t ofs,
 }
 
 /**
- * nand_unlock - [REPLACABLE] unlocks specified locked blockes
+ * nand_unlock - [REPLACEABLE] unlocks specified locked blocks
+ * @mtd: mtd info
+ * @ofs: offset to start unlock from
+ * @len: length to unlock
  *
- * @param mtd - mtd info
- * @param ofs - offset to start unlock from
- * @param len - length to unlock
- *
- * @return - unlock status
+ * Returns unlock status.
  */
 int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 {
@@ -932,7 +948,7 @@ int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 	int chipnr;
 	struct nand_chip *chip = mtd->priv;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: start = 0x%012llx, len = %llu\n",
+	pr_debug("%s: start = 0x%012llx, len = %llu\n",
 			__func__, (unsigned long long)ofs, len);
 
 	if (check_offs_len(mtd, ofs, len))
@@ -942,7 +958,7 @@ int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 	if (ofs + len == mtd->size)
 		len -= mtd->erasesize;
 
-	nand_get_device(chip, mtd, FL_UNLOCKING);
+	nand_get_device(mtd, FL_UNLOCKING);
 
 	/* Shift to get chip number */
 	chipnr = ofs >> chip->chip_shift;
@@ -951,7 +967,7 @@ int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 
 	/* Check, if it is write protected */
 	if (nand_check_wp(mtd)) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: Device is write protected!!!\n",
+		pr_debug("%s: device is write protected!\n",
 					__func__);
 		ret = -EIO;
 		goto out;
@@ -960,28 +976,25 @@ int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 	ret = __nand_unlock(mtd, ofs, len, 0);
 
 out:
-	/* de-select the NAND device */
 	chip->select_chip(mtd, -1);
-
 	nand_release_device(mtd);
 
 	return ret;
 }
+EXPORT_SYMBOL(nand_unlock);
 
 /**
- * nand_lock - [REPLACABLE] locks all blockes present in the device
- *
- * @param mtd - mtd info
- * @param ofs - offset to start unlock from
- * @param len - length to unlock
+ * nand_lock - [REPLACEABLE] locks all blocks present in the device
+ * @mtd: mtd info
+ * @ofs: offset to start unlock from
+ * @len: length to unlock
  *
- * @return - lock status
+ * This feature is not supported in many NAND parts. 'Micron' NAND parts do
+ * have this feature, but it allows only to lock all blocks, not for specified
+ * range for block. Implementing 'lock' feature by making use of 'unlock', for
+ * now.
  *
- * This feature is not support in many NAND parts. 'Micron' NAND parts
- * do have this feature, but it allows only to lock all blocks not for
- * specified range for block.
- *
- * Implementing 'lock' feature by making use of 'unlock', for now.
+ * Returns lock status.
  */
 int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 {
@@ -989,13 +1002,13 @@ int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 	int chipnr, status, page;
 	struct nand_chip *chip = mtd->priv;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: start = 0x%012llx, len = %llu\n",
+	pr_debug("%s: start = 0x%012llx, len = %llu\n",
 			__func__, (unsigned long long)ofs, len);
 
 	if (check_offs_len(mtd, ofs, len))
 		ret = -EINVAL;
 
-	nand_get_device(chip, mtd, FL_LOCKING);
+	nand_get_device(mtd, FL_LOCKING);
 
 	/* Shift to get chip number */
 	chipnr = ofs >> chip->chip_shift;
@@ -1004,7 +1017,7 @@ int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 
 	/* Check, if it is write protected */
 	if (nand_check_wp(mtd)) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: Device is write protected!!!\n",
+		pr_debug("%s: device is write protected!\n",
 					__func__);
 		status = MTD_ERASE_FAILED;
 		ret = -EIO;
@@ -1017,10 +1030,9 @@ int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 
 	/* Call wait ready function */
 	status = chip->waitfunc(mtd, chip);
-	udelay(1000);
 	/* See if device thinks it succeeded */
-	if (status & 0x01) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: Error status = 0x%08x\n",
+	if (status & NAND_STATUS_FAIL) {
+		pr_debug("%s: error status = 0x%08x\n",
 					__func__, status);
 		ret = -EIO;
 		goto out;
@@ -1029,42 +1041,45 @@ int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 	ret = __nand_unlock(mtd, ofs, len, 0x1);
 
 out:
-	/* de-select the NAND device */
 	chip->select_chip(mtd, -1);
-
 	nand_release_device(mtd);
 
 	return ret;
 }
+EXPORT_SYMBOL(nand_lock);
 
 /**
- * nand_read_page_raw - [Intern] read raw page data without ecc
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @buf:	buffer to store read data
- * @page:	page number to read
+ * nand_read_page_raw - [INTERN] read raw page data without ecc
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
+ * @page: page number to read
  *
- * Not for syndrome calculating ecc controllers, which use a special oob layout
+ * Not for syndrome calculating ECC controllers, which use a special oob layout.
  */
 static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
-			      uint8_t *buf, int page)
+			      uint8_t *buf, int oob_required, int page)
 {
 	chip->read_buf(mtd, buf, mtd->writesize);
-	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+	if (oob_required)
+		chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
 	return 0;
 }
 
 /**
- * nand_read_page_raw_syndrome - [Intern] read raw page data without ecc
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @buf:	buffer to store read data
- * @page:	page number to read
+ * nand_read_page_raw_syndrome - [INTERN] read raw page data without ecc
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
+ * @page: page number to read
  *
  * We need a special oob layout and handling even when OOB isn't used.
  */
-static int nand_read_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
-			      uint8_t *buf, int page)
+static int nand_read_page_raw_syndrome(struct mtd_info *mtd,
+				       struct nand_chip *chip, uint8_t *buf,
+				       int oob_required, int page)
 {
 	int eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
@@ -1097,14 +1112,15 @@ static int nand_read_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip *c
 }
 
 /**
- * nand_read_page_swecc - [REPLACABLE] software ecc based page read function
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @buf:	buffer to store read data
- * @page:	page number to read
+ * nand_read_page_swecc - [REPLACEABLE] software ECC based page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
+ * @page: page number to read
  */
 static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
-				uint8_t *buf, int page)
+				uint8_t *buf, int oob_required, int page)
 {
 	int i, eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
@@ -1113,8 +1129,9 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
 	uint8_t *ecc_calc = chip->buffers->ecccalc;
 	uint8_t *ecc_code = chip->buffers->ecccode;
 	uint32_t *eccpos = chip->ecc.layout->eccpos;
+	unsigned int max_bitflips = 0;
 
-	chip->ecc.read_page_raw(mtd, chip, buf, page);
+	chip->ecc.read_page_raw(mtd, chip, buf, 1, page);
 
 	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
 		chip->ecc.calculate(mtd, p, &ecc_calc[i]);
@@ -1129,23 +1146,28 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
 		int stat;
 
 		stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
-		if (stat < 0)
+		if (stat < 0) {
 			mtd->ecc_stats.failed++;
-		else
+		} else {
 			mtd->ecc_stats.corrected += stat;
+			max_bitflips = max_t(unsigned int, max_bitflips, stat);
+		}
 	}
-	return 0;
+	return max_bitflips;
 }
 
 /**
- * nand_read_subpage - [REPLACABLE] software ecc based sub-page read function
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @data_offs:	offset of requested data within the page
- * @readlen:	data length
- * @bufpoi:	buffer to store read data
+ * nand_read_subpage - [REPLACEABLE] ECC based sub-page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @data_offs: offset of requested data within the page
+ * @readlen: data length
+ * @bufpoi: buffer to store read data
+ * @page: page number to read
  */
-static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi)
+static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
+			uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi,
+			int page)
 {
 	int start_step, end_step, num_steps;
 	uint32_t *eccpos = chip->ecc.layout->eccpos;
@@ -1153,13 +1175,16 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint3
 	int data_col_addr, i, gaps = 0;
 	int datafrag_len, eccfrag_len, aligned_len, aligned_pos;
 	int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1;
+	int index;
+	unsigned int max_bitflips = 0;
 
-	/* Column address wihin the page aligned to ECC size (256bytes). */
+	/* Column address within the page aligned to ECC size (256bytes) */
 	start_step = data_offs / chip->ecc.size;
 	end_step = (data_offs + readlen - 1) / chip->ecc.size;
 	num_steps = end_step - start_step + 1;
+	index = start_step * chip->ecc.bytes;
 
-	/* Data size aligned to ECC ecc.size*/
+	/* Data size aligned to ECC ecc.size */
 	datafrag_len = num_steps * chip->ecc.size;
 	eccfrag_len = num_steps * chip->ecc.bytes;
 
@@ -1171,16 +1196,16 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint3
 	p = bufpoi + data_col_addr;
 	chip->read_buf(mtd, p, datafrag_len);
 
-	/* Calculate  ECC */
+	/* Calculate ECC */
 	for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size)
 		chip->ecc.calculate(mtd, p, &chip->buffers->ecccalc[i]);
 
-	/* The performance is faster if to position offsets
-	   according to ecc.pos. Let make sure here that
-	   there are no gaps in ecc positions */
+	/*
+	 * The performance is faster if we position offsets according to
+	 * ecc.pos. Let's make sure that there are no gaps in ECC positions.
+	 */
 	for (i = 0; i < eccfrag_len - 1; i++) {
-		if (eccpos[i + start_step * chip->ecc.bytes] + 1 !=
-			eccpos[i + start_step * chip->ecc.bytes + 1]) {
+		if (eccpos[i + index] + 1 != eccpos[i + index + 1]) {
 			gaps = 1;
 			break;
 		}
@@ -1189,46 +1214,53 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint3
 		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
 		chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
 	} else {
-		/* send the command to read the particular ecc bytes */
-		/* take care about buswidth alignment in read_buf */
-		aligned_pos = eccpos[start_step * chip->ecc.bytes] & ~(busw - 1);
+		/*
+		 * Send the command to read the particular ECC bytes take care
+		 * about buswidth alignment in read_buf.
+		 */
+		aligned_pos = eccpos[index] & ~(busw - 1);
 		aligned_len = eccfrag_len;
-		if (eccpos[start_step * chip->ecc.bytes] & (busw - 1))
+		if (eccpos[index] & (busw - 1))
 			aligned_len++;
-		if (eccpos[(start_step + num_steps) * chip->ecc.bytes] & (busw - 1))
+		if (eccpos[index + (num_steps * chip->ecc.bytes)] & (busw - 1))
 			aligned_len++;
 
-		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize + aligned_pos, -1);
+		chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
+					mtd->writesize + aligned_pos, -1);
 		chip->read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len);
 	}
 
 	for (i = 0; i < eccfrag_len; i++)
-		chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + start_step * chip->ecc.bytes]];
+		chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + index]];
 
 	p = bufpoi + data_col_addr;
 	for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) {
 		int stat;
 
-		stat = chip->ecc.correct(mtd, p, &chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]);
-		if (stat == -1)
+		stat = chip->ecc.correct(mtd, p,
+			&chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]);
+		if (stat < 0) {
 			mtd->ecc_stats.failed++;
-		else
+		} else {
 			mtd->ecc_stats.corrected += stat;
+			max_bitflips = max_t(unsigned int, max_bitflips, stat);
+		}
 	}
-	return 0;
+	return max_bitflips;
 }
 
 /**
- * nand_read_page_hwecc - [REPLACABLE] hardware ecc based page read function
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @buf:	buffer to store read data
- * @page:	page number to read
+ * nand_read_page_hwecc - [REPLACEABLE] hardware ECC based page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
+ * @page: page number to read
  *
- * Not for syndrome calculating ecc controllers which need a special oob layout
+ * Not for syndrome calculating ECC controllers which need a special oob layout.
  */
 static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
-				uint8_t *buf, int page)
+				uint8_t *buf, int oob_required, int page)
 {
 	int i, eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
@@ -1237,6 +1269,7 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
 	uint8_t *ecc_calc = chip->buffers->ecccalc;
 	uint8_t *ecc_code = chip->buffers->ecccode;
 	uint32_t *eccpos = chip->ecc.layout->eccpos;
+	unsigned int max_bitflips = 0;
 
 	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
 		chip->ecc.hwctl(mtd, NAND_ECC_READ);
@@ -1255,30 +1288,32 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
 		int stat;
 
 		stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
-		if (stat < 0)
+		if (stat < 0) {
 			mtd->ecc_stats.failed++;
-		else
+		} else {
 			mtd->ecc_stats.corrected += stat;
+			max_bitflips = max_t(unsigned int, max_bitflips, stat);
+		}
 	}
-	return 0;
+	return max_bitflips;
 }
 
 /**
- * nand_read_page_hwecc_oob_first - [REPLACABLE] hw ecc, read oob first
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @buf:	buffer to store read data
- * @page:	page number to read
+ * nand_read_page_hwecc_oob_first - [REPLACEABLE] hw ecc, read oob first
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
+ * @page: page number to read
  *
- * Hardware ECC for large page chips, require OOB to be read first.
- * For this ECC mode, the write_page method is re-used from ECC_HW.
- * These methods read/write ECC from the OOB area, unlike the
- * ECC_HW_SYNDROME support with multiple ECC steps, follows the
- * "infix ECC" scheme and reads/writes ECC from the data area, by
- * overwriting the NAND manufacturer bad block markings.
+ * Hardware ECC for large page chips, require OOB to be read first. For this
+ * ECC mode, the write_page method is re-used from ECC_HW. These methods
+ * read/write ECC from the OOB area, unlike the ECC_HW_SYNDROME support with
+ * multiple ECC steps, follows the "infix ECC" scheme and reads/writes ECC from
+ * the data area, by overwriting the NAND manufacturer bad block markings.
  */
 static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
-	struct nand_chip *chip, uint8_t *buf, int page)
+	struct nand_chip *chip, uint8_t *buf, int oob_required, int page)
 {
 	int i, eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
@@ -1287,6 +1322,7 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
 	uint8_t *ecc_code = chip->buffers->ecccode;
 	uint32_t *eccpos = chip->ecc.layout->eccpos;
 	uint8_t *ecc_calc = chip->buffers->ecccalc;
+	unsigned int max_bitflips = 0;
 
 	/* Read the OOB area first */
 	chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
@@ -1304,32 +1340,36 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
 		chip->ecc.calculate(mtd, p, &ecc_calc[i]);
 
 		stat = chip->ecc.correct(mtd, p, &ecc_code[i], NULL);
-		if (stat < 0)
+		if (stat < 0) {
 			mtd->ecc_stats.failed++;
-		else
+		} else {
 			mtd->ecc_stats.corrected += stat;
+			max_bitflips = max_t(unsigned int, max_bitflips, stat);
+		}
 	}
-	return 0;
+	return max_bitflips;
 }
 
 /**
- * nand_read_page_syndrome - [REPLACABLE] hardware ecc syndrom based page read
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @buf:	buffer to store read data
- * @page:	page number to read
+ * nand_read_page_syndrome - [REPLACEABLE] hardware ECC syndrome based page read
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
+ * @page: page number to read
  *
- * The hw generator calculates the error syndrome automatically. Therefor
- * we need a special oob layout and handling.
+ * The hw generator calculates the error syndrome automatically. Therefore we
+ * need a special oob layout and handling.
  */
 static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
-				   uint8_t *buf, int page)
+				   uint8_t *buf, int oob_required, int page)
 {
 	int i, eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
 	int eccsteps = chip->ecc.steps;
 	uint8_t *p = buf;
 	uint8_t *oob = chip->oob_poi;
+	unsigned int max_bitflips = 0;
 
 	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
 		int stat;
@@ -1346,10 +1386,12 @@ static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
 		chip->read_buf(mtd, oob, eccbytes);
 		stat = chip->ecc.correct(mtd, p, oob, NULL);
 
-		if (stat < 0)
+		if (stat < 0) {
 			mtd->ecc_stats.failed++;
-		else
+		} else {
 			mtd->ecc_stats.corrected += stat;
+			max_bitflips = max_t(unsigned int, max_bitflips, stat);
+		}
 
 		oob += eccbytes;
 
@@ -1364,33 +1406,33 @@ static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
 	if (i)
 		chip->read_buf(mtd, oob, i);
 
-	return 0;
+	return max_bitflips;
 }
 
 /**
- * nand_transfer_oob - [Internal] Transfer oob to client buffer
- * @chip:	nand chip structure
- * @oob:	oob destination address
- * @ops:	oob ops structure
- * @len:	size of oob to transfer
+ * nand_transfer_oob - [INTERN] Transfer oob to client buffer
+ * @chip: nand chip structure
+ * @oob: oob destination address
+ * @ops: oob ops structure
+ * @len: size of oob to transfer
  */
 static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob,
 				  struct mtd_oob_ops *ops, size_t len)
 {
-	switch(ops->mode) {
+	switch (ops->mode) {
 
-	case MTD_OOB_PLACE:
-	case MTD_OOB_RAW:
+	case MTD_OPS_PLACE_OOB:
+	case MTD_OPS_RAW:
 		memcpy(oob, chip->oob_poi + ops->ooboffs, len);
 		return oob + len;
 
-	case MTD_OOB_AUTO: {
+	case MTD_OPS_AUTO_OOB: {
 		struct nand_oobfree *free = chip->ecc.layout->oobfree;
 		uint32_t boffs = 0, roffs = ops->ooboffs;
 		size_t bytes = 0;
 
-		for(; free->length && len; free++, len -= bytes) {
-			/* Read request not from offset 0 ? */
+		for (; free->length && len; free++, len -= bytes) {
+			/* Read request not from offset 0? */
 			if (unlikely(roffs)) {
 				if (roffs >= free->length) {
 					roffs -= free->length;
@@ -1416,31 +1458,53 @@ static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob,
 }
 
 /**
- * nand_do_read_ops - [Internal] Read data with ECC
+ * nand_setup_read_retry - [INTERN] Set the READ RETRY mode
+ * @mtd: MTD device structure
+ * @retry_mode: the retry mode to use
  *
- * @mtd:	MTD device structure
- * @from:	offset to read from
- * @ops:	oob ops structure
+ * Some vendors supply a special command to shift the Vt threshold, to be used
+ * when there are too many bitflips in a page (i.e., ECC error). After setting
+ * a new threshold, the host should retry reading the page.
+ */
+static int nand_setup_read_retry(struct mtd_info *mtd, int retry_mode)
+{
+	struct nand_chip *chip = mtd->priv;
+
+	pr_debug("setting READ RETRY mode %d\n", retry_mode);
+
+	if (retry_mode >= chip->read_retries)
+		return -EINVAL;
+
+	if (!chip->setup_read_retry)
+		return -EOPNOTSUPP;
+
+	return chip->setup_read_retry(mtd, retry_mode);
+}
+
+/**
+ * nand_do_read_ops - [INTERN] Read data with ECC
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob ops structure
  *
  * Internal function. Called with chip held.
  */
 static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 			    struct mtd_oob_ops *ops)
 {
-	int chipnr, page, realpage, col, bytes, aligned;
+	int chipnr, page, realpage, col, bytes, aligned, oob_required;
 	struct nand_chip *chip = mtd->priv;
-	struct mtd_ecc_stats stats;
-	int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
-	int sndcmd = 1;
 	int ret = 0;
 	uint32_t readlen = ops->len;
 	uint32_t oobreadlen = ops->ooblen;
-	uint32_t max_oobsize = ops->mode == MTD_OOB_AUTO ?
+	uint32_t max_oobsize = ops->mode == MTD_OPS_AUTO_OOB ?
 		mtd->oobavail : mtd->oobsize;
 
 	uint8_t *bufpoi, *oob, *buf;
-
-	stats = mtd->ecc_stats;
+	int use_bufpoi;
+	unsigned int max_bitflips = 0;
+	int retry_mode = 0;
+	bool ecc_fail = false;
 
 	chipnr = (int)(from >> chip->chip_shift);
 	chip->select_chip(mtd, chipnr);
@@ -1452,43 +1516,72 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 
 	buf = ops->datbuf;
 	oob = ops->oobbuf;
+	oob_required = oob ? 1 : 0;
+
+	while (1) {
+		unsigned int ecc_failures = mtd->ecc_stats.failed;
 
-	while(1) {
 		bytes = min(mtd->writesize - col, readlen);
 		aligned = (bytes == mtd->writesize);
 
-		/* Is the current page in the buffer ? */
+		if (!aligned)
+			use_bufpoi = 1;
+		else if (chip->options & NAND_USE_BOUNCE_BUFFER)
+			use_bufpoi = !virt_addr_valid(buf);
+		else
+			use_bufpoi = 0;
+
+		/* Is the current page in the buffer? */
 		if (realpage != chip->pagebuf || oob) {
-			bufpoi = aligned ? buf : chip->buffers->databuf;
+			bufpoi = use_bufpoi ? chip->buffers->databuf : buf;
 
-			if (likely(sndcmd)) {
-				chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
-				sndcmd = 0;
-			}
+			if (use_bufpoi && aligned)
+				pr_debug("%s: using read bounce buffer for buf@%p\n",
+						 __func__, buf);
+
+read_retry:
+			chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
 
-			/* Now read the page into the buffer */
-			if (unlikely(ops->mode == MTD_OOB_RAW))
-				ret = chip->ecc.read_page_raw(mtd, chip,
-							      bufpoi, page);
-			else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob)
-				ret = chip->ecc.read_subpage(mtd, chip, col, bytes, bufpoi);
+			/*
+			 * Now read the page into the buffer.  Absent an error,
+			 * the read methods return max bitflips per ecc step.
+			 */
+			if (unlikely(ops->mode == MTD_OPS_RAW))
+				ret = chip->ecc.read_page_raw(mtd, chip, bufpoi,
+							      oob_required,
+							      page);
+			else if (!aligned && NAND_HAS_SUBPAGE_READ(chip) &&
+				 !oob)
+				ret = chip->ecc.read_subpage(mtd, chip,
+							col, bytes, bufpoi,
+							page);
 			else
 				ret = chip->ecc.read_page(mtd, chip, bufpoi,
-							  page);
-			if (ret < 0)
+							  oob_required, page);
+			if (ret < 0) {
+				if (use_bufpoi)
+					/* Invalidate page cache */
+					chip->pagebuf = -1;
 				break;
+			}
+
+			max_bitflips = max_t(unsigned int, max_bitflips, ret);
 
 			/* Transfer not aligned data */
-			if (!aligned) {
-				if (!NAND_SUBPAGE_READ(chip) && !oob)
+			if (use_bufpoi) {
+				if (!NAND_HAS_SUBPAGE_READ(chip) && !oob &&
+				    !(mtd->ecc_stats.failed - ecc_failures) &&
+				    (ops->mode != MTD_OPS_RAW)) {
 					chip->pagebuf = realpage;
+					chip->pagebuf_bitflips = ret;
+				} else {
+					/* Invalidate page cache */
+					chip->pagebuf = -1;
+				}
 				memcpy(buf, chip->buffers->databuf + col, bytes);
 			}
 
-			buf += bytes;
-
 			if (unlikely(oob)) {
-
 				int toread = min(oobreadlen, max_oobsize);
 
 				if (toread) {
@@ -1498,30 +1591,53 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 				}
 			}
 
-			if (!(chip->options & NAND_NO_READRDY)) {
-				/*
-				 * Apply delay or wait for ready/busy pin. Do
-				 * this before the AUTOINCR check, so no
-				 * problems arise if a chip which does auto
-				 * increment is marked as NOAUTOINCR by the
-				 * board driver.
-				 */
+			if (chip->options & NAND_NEED_READRDY) {
+				/* Apply delay or wait for ready/busy pin */
 				if (!chip->dev_ready)
 					udelay(chip->chip_delay);
 				else
 					nand_wait_ready(mtd);
 			}
+
+			if (mtd->ecc_stats.failed - ecc_failures) {
+				if (retry_mode + 1 < chip->read_retries) {
+					retry_mode++;
+					ret = nand_setup_read_retry(mtd,
+							retry_mode);
+					if (ret < 0)
+						break;
+
+					/* Reset failures; retry */
+					mtd->ecc_stats.failed = ecc_failures;
+					goto read_retry;
+				} else {
+					/* No more retry modes; real failure */
+					ecc_fail = true;
+				}
+			}
+
+			buf += bytes;
 		} else {
 			memcpy(buf, chip->buffers->databuf + col, bytes);
 			buf += bytes;
+			max_bitflips = max_t(unsigned int, max_bitflips,
+					     chip->pagebuf_bitflips);
 		}
 
 		readlen -= bytes;
 
+		/* Reset to retry mode 0 */
+		if (retry_mode) {
+			ret = nand_setup_read_retry(mtd, 0);
+			if (ret < 0)
+				break;
+			retry_mode = 0;
+		}
+
 		if (!readlen)
 			break;
 
-		/* For subsequent reads align to page boundary. */
+		/* For subsequent reads align to page boundary */
 		col = 0;
 		/* Increment page address */
 		realpage++;
@@ -1533,92 +1649,72 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 			chip->select_chip(mtd, -1);
 			chip->select_chip(mtd, chipnr);
 		}
-
-		/* Check, if the chip supports auto page increment
-		 * or if we have hit a block boundary.
-		 */
-		if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck))
-			sndcmd = 1;
 	}
+	chip->select_chip(mtd, -1);
 
 	ops->retlen = ops->len - (size_t) readlen;
 	if (oob)
 		ops->oobretlen = ops->ooblen - oobreadlen;
 
-	if (ret)
+	if (ret < 0)
 		return ret;
 
-	if (mtd->ecc_stats.failed - stats.failed)
+	if (ecc_fail)
 		return -EBADMSG;
 
-	return  mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0;
+	return max_bitflips;
 }
 
 /**
- * nand_read - [MTD Interface] MTD compability function for nand_do_read_ecc
- * @mtd:	MTD device structure
- * @from:	offset to read from
- * @len:	number of bytes to read
- * @retlen:	pointer to variable to store the number of read bytes
- * @buf:	the databuffer to put data
+ * nand_read - [MTD Interface] MTD compatibility function for nand_do_read_ecc
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @len: number of bytes to read
+ * @retlen: pointer to variable to store the number of read bytes
+ * @buf: the databuffer to put data
  *
- * Get hold of the chip and call nand_do_read
+ * Get hold of the chip and call nand_do_read.
  */
 static int nand_read(struct mtd_info *mtd, loff_t from, size_t len,
 		     size_t *retlen, uint8_t *buf)
 {
-	struct nand_chip *chip = mtd->priv;
+	struct mtd_oob_ops ops;
 	int ret;
 
-	/* Do not allow reads past end of device */
-	if ((from + len) > mtd->size)
-		return -EINVAL;
-	if (!len)
-		return 0;
-
-	nand_get_device(chip, mtd, FL_READING);
-
-	chip->ops.len = len;
-	chip->ops.datbuf = buf;
-	chip->ops.oobbuf = NULL;
-
-	ret = nand_do_read_ops(mtd, from, &chip->ops);
-
-	*retlen = chip->ops.retlen;
-
+	nand_get_device(mtd, FL_READING);
+	ops.len = len;
+	ops.datbuf = buf;
+	ops.oobbuf = NULL;
+	ops.mode = MTD_OPS_PLACE_OOB;
+	ret = nand_do_read_ops(mtd, from, &ops);
+	*retlen = ops.retlen;
 	nand_release_device(mtd);
-
 	return ret;
 }
 
 /**
- * nand_read_oob_std - [REPLACABLE] the most common OOB data read function
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @page:	page number to read
- * @sndcmd:	flag whether to issue read command or not
+ * nand_read_oob_std - [REPLACEABLE] the most common OOB data read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to read
  */
 static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
-			     int page, int sndcmd)
+			     int page)
 {
-	if (sndcmd) {
-		chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
-		sndcmd = 0;
-	}
+	chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
 	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-	return sndcmd;
+	return 0;
 }
 
 /**
- * nand_read_oob_syndrome - [REPLACABLE] OOB data read function for HW ECC
+ * nand_read_oob_syndrome - [REPLACEABLE] OOB data read function for HW ECC
  *			    with syndromes
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @page:	page number to read
- * @sndcmd:	flag whether to issue read command or not
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to read
  */
 static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
-				  int page, int sndcmd)
+				  int page)
 {
 	uint8_t *buf = chip->oob_poi;
 	int length = mtd->oobsize;
@@ -1645,14 +1741,14 @@ static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
 	if (length > 0)
 		chip->read_buf(mtd, bufpoi, length);
 
-	return 1;
+	return 0;
 }
 
 /**
- * nand_write_oob_std - [REPLACABLE] the most common OOB data write function
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @page:	page number to write
+ * nand_write_oob_std - [REPLACEABLE] the most common OOB data write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to write
  */
 static int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
 			      int page)
@@ -1672,11 +1768,11 @@ static int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
 }
 
 /**
- * nand_write_oob_syndrome - [REPLACABLE] OOB data write function for HW ECC
- *			     with syndrome - only for large page flash !
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @page:	page number to write
+ * nand_write_oob_syndrome - [REPLACEABLE] OOB data write function for HW ECC
+ *			     with syndrome - only for large page flash
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to write
  */
 static int nand_write_oob_syndrome(struct mtd_info *mtd,
 				   struct nand_chip *chip, int page)
@@ -1731,34 +1827,37 @@ static int nand_write_oob_syndrome(struct mtd_info *mtd,
 }
 
 /**
- * nand_do_read_oob - [Intern] NAND read out-of-band
- * @mtd:	MTD device structure
- * @from:	offset to read from
- * @ops:	oob operations description structure
+ * nand_do_read_oob - [INTERN] NAND read out-of-band
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob operations description structure
  *
- * NAND read out-of-band data from the spare area
+ * NAND read out-of-band data from the spare area.
  */
 static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
 			    struct mtd_oob_ops *ops)
 {
-	int page, realpage, chipnr, sndcmd = 1;
+	int page, realpage, chipnr;
 	struct nand_chip *chip = mtd->priv;
-	int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
+	struct mtd_ecc_stats stats;
 	int readlen = ops->ooblen;
 	int len;
 	uint8_t *buf = ops->oobbuf;
+	int ret = 0;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08Lx, len = %i\n",
+	pr_debug("%s: from = 0x%08Lx, len = %i\n",
 			__func__, (unsigned long long)from, readlen);
 
-	if (ops->mode == MTD_OOB_AUTO)
+	stats = mtd->ecc_stats;
+
+	if (ops->mode == MTD_OPS_AUTO_OOB)
 		len = chip->ecc.layout->oobavail;
 	else
 		len = mtd->oobsize;
 
 	if (unlikely(ops->ooboffs >= len)) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to start read "
-					"outside oob\n", __func__);
+		pr_debug("%s: attempt to start read outside oob\n",
+				__func__);
 		return -EINVAL;
 	}
 
@@ -1766,8 +1865,8 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
 	if (unlikely(from >= mtd->size ||
 		     ops->ooboffs + readlen > ((mtd->size >> chip->page_shift) -
 					(from >> chip->page_shift)) * len)) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt read beyond end "
-					"of device\n", __func__);
+		pr_debug("%s: attempt to read beyond end of device\n",
+				__func__);
 		return -EINVAL;
 	}
 
@@ -1778,19 +1877,20 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
 	realpage = (int)(from >> chip->page_shift);
 	page = realpage & chip->pagemask;
 
-	while(1) {
-		sndcmd = chip->ecc.read_oob(mtd, chip, page, sndcmd);
+	while (1) {
+		if (ops->mode == MTD_OPS_RAW)
+			ret = chip->ecc.read_oob_raw(mtd, chip, page);
+		else
+			ret = chip->ecc.read_oob(mtd, chip, page);
+
+		if (ret < 0)
+			break;
 
 		len = min(len, readlen);
 		buf = nand_transfer_oob(chip, buf, ops, len);
 
-		if (!(chip->options & NAND_NO_READRDY)) {
-			/*
-			 * Apply delay or wait for ready/busy pin. Do this
-			 * before the AUTOINCR check, so no problems arise if a
-			 * chip which does auto increment is marked as
-			 * NOAUTOINCR by the board driver.
-			 */
+		if (chip->options & NAND_NEED_READRDY) {
+			/* Apply delay or wait for ready/busy pin */
 			if (!chip->dev_ready)
 				udelay(chip->chip_delay);
 			else
@@ -1811,47 +1911,48 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
 			chip->select_chip(mtd, -1);
 			chip->select_chip(mtd, chipnr);
 		}
-
-		/* Check, if the chip supports auto page increment
-		 * or if we have hit a block boundary.
-		 */
-		if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck))
-			sndcmd = 1;
 	}
+	chip->select_chip(mtd, -1);
 
-	ops->oobretlen = ops->ooblen;
-	return 0;
+	ops->oobretlen = ops->ooblen - readlen;
+
+	if (ret < 0)
+		return ret;
+
+	if (mtd->ecc_stats.failed - stats.failed)
+		return -EBADMSG;
+
+	return  mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0;
 }
 
 /**
  * nand_read_oob - [MTD Interface] NAND read data and/or out-of-band
- * @mtd:	MTD device structure
- * @from:	offset to read from
- * @ops:	oob operation description structure
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob operation description structure
  *
- * NAND read data and/or out-of-band data
+ * NAND read data and/or out-of-band data.
  */
 static int nand_read_oob(struct mtd_info *mtd, loff_t from,
 			 struct mtd_oob_ops *ops)
 {
-	struct nand_chip *chip = mtd->priv;
 	int ret = -ENOTSUPP;
 
 	ops->retlen = 0;
 
 	/* Do not allow reads past end of device */
 	if (ops->datbuf && (from + ops->len) > mtd->size) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt read "
-				"beyond end of device\n", __func__);
+		pr_debug("%s: attempt to read beyond end of device\n",
+				__func__);
 		return -EINVAL;
 	}
 
-	nand_get_device(chip, mtd, FL_READING);
+	nand_get_device(mtd, FL_READING);
 
-	switch(ops->mode) {
-	case MTD_OOB_PLACE:
-	case MTD_OOB_AUTO:
-	case MTD_OOB_RAW:
+	switch (ops->mode) {
+	case MTD_OPS_PLACE_OOB:
+	case MTD_OPS_AUTO_OOB:
+	case MTD_OPS_RAW:
 		break;
 
 	default:
@@ -1863,37 +1964,43 @@ static int nand_read_oob(struct mtd_info *mtd, loff_t from,
 	else
 		ret = nand_do_read_ops(mtd, from, ops);
 
- out:
+out:
 	nand_release_device(mtd);
 	return ret;
 }
 
 
 /**
- * nand_write_page_raw - [Intern] raw page write function
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @buf:	data buffer
+ * nand_write_page_raw - [INTERN] raw page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
+ * @oob_required: must write chip->oob_poi to OOB
  *
- * Not for syndrome calculating ecc controllers, which use a special oob layout
+ * Not for syndrome calculating ECC controllers, which use a special oob layout.
  */
-static void nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
-				const uint8_t *buf)
+static int nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+				const uint8_t *buf, int oob_required)
 {
 	chip->write_buf(mtd, buf, mtd->writesize);
-	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+	if (oob_required)
+		chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	return 0;
 }
 
 /**
- * nand_write_page_raw_syndrome - [Intern] raw page write function
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @buf:	data buffer
+ * nand_write_page_raw_syndrome - [INTERN] raw page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
+ * @oob_required: must write chip->oob_poi to OOB
  *
  * We need a special oob layout and handling even when ECC isn't checked.
  */
-static void nand_write_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
-				const uint8_t *buf)
+static int nand_write_page_raw_syndrome(struct mtd_info *mtd,
+					struct nand_chip *chip,
+					const uint8_t *buf, int oob_required)
 {
 	int eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
@@ -1909,7 +2016,7 @@ static void nand_write_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip
 			oob += chip->ecc.prepad;
 		}
 
-		chip->read_buf(mtd, oob, eccbytes);
+		chip->write_buf(mtd, oob, eccbytes);
 		oob += eccbytes;
 
 		if (chip->ecc.postpad) {
@@ -1921,15 +2028,18 @@ static void nand_write_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip
 	size = mtd->oobsize - (oob - chip->oob_poi);
 	if (size)
 		chip->write_buf(mtd, oob, size);
+
+	return 0;
 }
 /**
- * nand_write_page_swecc - [REPLACABLE] software ecc based page write function
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @buf:	data buffer
+ * nand_write_page_swecc - [REPLACEABLE] software ECC based page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
+ * @oob_required: must write chip->oob_poi to OOB
  */
-static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
-				  const uint8_t *buf)
+static int nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
+				  const uint8_t *buf, int oob_required)
 {
 	int i, eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
@@ -1938,24 +2048,25 @@ static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
 	const uint8_t *p = buf;
 	uint32_t *eccpos = chip->ecc.layout->eccpos;
 
-	/* Software ecc calculation */
+	/* Software ECC calculation */
 	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
 		chip->ecc.calculate(mtd, p, &ecc_calc[i]);
 
 	for (i = 0; i < chip->ecc.total; i++)
 		chip->oob_poi[eccpos[i]] = ecc_calc[i];
 
-	chip->ecc.write_page_raw(mtd, chip, buf);
+	return chip->ecc.write_page_raw(mtd, chip, buf, 1);
 }
 
 /**
- * nand_write_page_hwecc - [REPLACABLE] hardware ecc based page write function
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @buf:	data buffer
+ * nand_write_page_hwecc - [REPLACEABLE] hardware ECC based page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
+ * @oob_required: must write chip->oob_poi to OOB
  */
-static void nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
-				  const uint8_t *buf)
+static int nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
+				  const uint8_t *buf, int oob_required)
 {
 	int i, eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
@@ -1974,19 +2085,85 @@ static void nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
 		chip->oob_poi[eccpos[i]] = ecc_calc[i];
 
 	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	return 0;
 }
 
+
 /**
- * nand_write_page_syndrome - [REPLACABLE] hardware ecc syndrom based page write
+ * nand_write_subpage_hwecc - [REPLACABLE] hardware ECC based subpage write
  * @mtd:	mtd info structure
  * @chip:	nand chip info structure
+ * @offset:	column address of subpage within the page
+ * @data_len:	data length
  * @buf:	data buffer
+ * @oob_required: must write chip->oob_poi to OOB
+ */
+static int nand_write_subpage_hwecc(struct mtd_info *mtd,
+				struct nand_chip *chip, uint32_t offset,
+				uint32_t data_len, const uint8_t *buf,
+				int oob_required)
+{
+	uint8_t *oob_buf  = chip->oob_poi;
+	uint8_t *ecc_calc = chip->buffers->ecccalc;
+	int ecc_size      = chip->ecc.size;
+	int ecc_bytes     = chip->ecc.bytes;
+	int ecc_steps     = chip->ecc.steps;
+	uint32_t *eccpos  = chip->ecc.layout->eccpos;
+	uint32_t start_step = offset / ecc_size;
+	uint32_t end_step   = (offset + data_len - 1) / ecc_size;
+	int oob_bytes       = mtd->oobsize / ecc_steps;
+	int step, i;
+
+	for (step = 0; step < ecc_steps; step++) {
+		/* configure controller for WRITE access */
+		chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
+
+		/* write data (untouched subpages already masked by 0xFF) */
+		chip->write_buf(mtd, buf, ecc_size);
+
+		/* mask ECC of un-touched subpages by padding 0xFF */
+		if ((step < start_step) || (step > end_step))
+			memset(ecc_calc, 0xff, ecc_bytes);
+		else
+			chip->ecc.calculate(mtd, buf, ecc_calc);
+
+		/* mask OOB of un-touched subpages by padding 0xFF */
+		/* if oob_required, preserve OOB metadata of written subpage */
+		if (!oob_required || (step < start_step) || (step > end_step))
+			memset(oob_buf, 0xff, oob_bytes);
+
+		buf += ecc_size;
+		ecc_calc += ecc_bytes;
+		oob_buf  += oob_bytes;
+	}
+
+	/* copy calculated ECC for whole page to chip->buffer->oob */
+	/* this include masked-value(0xFF) for unwritten subpages */
+	ecc_calc = chip->buffers->ecccalc;
+	for (i = 0; i < chip->ecc.total; i++)
+		chip->oob_poi[eccpos[i]] = ecc_calc[i];
+
+	/* write OOB buffer to NAND device */
+	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	return 0;
+}
+
+
+/**
+ * nand_write_page_syndrome - [REPLACEABLE] hardware ECC syndrome based page write
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
+ * @oob_required: must write chip->oob_poi to OOB
  *
- * The hw generator calculates the error syndrome automatically. Therefor
- * we need a special oob layout and handling.
+ * The hw generator calculates the error syndrome automatically. Therefore we
+ * need a special oob layout and handling.
  */
-static void nand_write_page_syndrome(struct mtd_info *mtd,
-				    struct nand_chip *chip, const uint8_t *buf)
+static int nand_write_page_syndrome(struct mtd_info *mtd,
+				    struct nand_chip *chip,
+				    const uint8_t *buf, int oob_required)
 {
 	int i, eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
@@ -2018,42 +2195,61 @@ static void nand_write_page_syndrome(struct mtd_info *mtd,
 	i = mtd->oobsize - (oob - chip->oob_poi);
 	if (i)
 		chip->write_buf(mtd, oob, i);
+
+	return 0;
 }
 
 /**
  * nand_write_page - [REPLACEABLE] write one page
- * @mtd:	MTD device structure
- * @chip:	NAND chip descriptor
- * @buf:	the data to write
- * @page:	page number to write
- * @cached:	cached programming
- * @raw:	use _raw version of write_page
+ * @mtd: MTD device structure
+ * @chip: NAND chip descriptor
+ * @offset: address offset within the page
+ * @data_len: length of actual data to be written
+ * @buf: the data to write
+ * @oob_required: must write chip->oob_poi to OOB
+ * @page: page number to write
+ * @cached: cached programming
+ * @raw: use _raw version of write_page
  */
 static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
-			   const uint8_t *buf, int page, int cached, int raw)
+		uint32_t offset, int data_len, const uint8_t *buf,
+		int oob_required, int page, int cached, int raw)
 {
-	int status;
+	int status, subpage;
+
+	if (!(chip->options & NAND_NO_SUBPAGE_WRITE) &&
+		chip->ecc.write_subpage)
+		subpage = offset || (data_len < mtd->writesize);
+	else
+		subpage = 0;
 
 	chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
 
 	if (unlikely(raw))
-		chip->ecc.write_page_raw(mtd, chip, buf);
+		status = chip->ecc.write_page_raw(mtd, chip, buf,
+							oob_required);
+	else if (subpage)
+		status = chip->ecc.write_subpage(mtd, chip, offset, data_len,
+							 buf, oob_required);
 	else
-		chip->ecc.write_page(mtd, chip, buf);
+		status = chip->ecc.write_page(mtd, chip, buf, oob_required);
+
+	if (status < 0)
+		return status;
 
 	/*
-	 * Cached progamming disabled for now, Not sure if its worth the
-	 * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s)
+	 * Cached progamming disabled for now. Not sure if it's worth the
+	 * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s).
 	 */
 	cached = 0;
 
-	if (!cached || !(chip->options & NAND_CACHEPRG)) {
+	if (!cached || !NAND_HAS_CACHEPROG(chip)) {
 
 		chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
 		status = chip->waitfunc(mtd, chip);
 		/*
 		 * See if operation failed and additional status checks are
-		 * available
+		 * available.
 		 */
 		if ((status & NAND_STATUS_FAIL) && (chip->errstat))
 			status = chip->errstat(mtd, chip, FL_WRITING, status,
@@ -2066,39 +2262,41 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
 		status = chip->waitfunc(mtd, chip);
 	}
 
-#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
-	/* Send command to read back the data */
-	chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
-
-	if (chip->verify_buf(mtd, buf, mtd->writesize))
-		return -EIO;
-#endif
 	return 0;
 }
 
 /**
- * nand_fill_oob - [Internal] Transfer client buffer to oob
- * @chip:	nand chip structure
- * @oob:	oob data buffer
- * @ops:	oob ops structure
+ * nand_fill_oob - [INTERN] Transfer client buffer to oob
+ * @mtd: MTD device structure
+ * @oob: oob data buffer
+ * @len: oob data write length
+ * @ops: oob ops structure
  */
-static uint8_t *nand_fill_oob(struct nand_chip *chip, uint8_t *oob, size_t len,
-						struct mtd_oob_ops *ops)
+static uint8_t *nand_fill_oob(struct mtd_info *mtd, uint8_t *oob, size_t len,
+			      struct mtd_oob_ops *ops)
 {
-	switch(ops->mode) {
+	struct nand_chip *chip = mtd->priv;
 
-	case MTD_OOB_PLACE:
-	case MTD_OOB_RAW:
+	/*
+	 * Initialise to all 0xFF, to avoid the possibility of left over OOB
+	 * data from a previous OOB read.
+	 */
+	memset(chip->oob_poi, 0xff, mtd->oobsize);
+
+	switch (ops->mode) {
+
+	case MTD_OPS_PLACE_OOB:
+	case MTD_OPS_RAW:
 		memcpy(chip->oob_poi + ops->ooboffs, oob, len);
 		return oob + len;
 
-	case MTD_OOB_AUTO: {
+	case MTD_OPS_AUTO_OOB: {
 		struct nand_oobfree *free = chip->ecc.layout->oobfree;
 		uint32_t boffs = 0, woffs = ops->ooboffs;
 		size_t bytes = 0;
 
-		for(; free->length && len; free++, len -= bytes) {
-			/* Write request not from offset 0 ? */
+		for (; free->length && len; free++, len -= bytes) {
+			/* Write request not from offset 0? */
 			if (unlikely(woffs)) {
 				if (woffs >= free->length) {
 					woffs -= free->length;
@@ -2123,15 +2321,15 @@ static uint8_t *nand_fill_oob(struct nand_chip *chip, uint8_t *oob, size_t len,
 	return NULL;
 }
 
-#define NOTALIGNED(x)	(x & (chip->subpagesize - 1)) != 0
+#define NOTALIGNED(x)	((x & (chip->subpagesize - 1)) != 0)
 
 /**
- * nand_do_write_ops - [Internal] NAND write with ECC
- * @mtd:	MTD device structure
- * @to:		offset to write to
- * @ops:	oob operations description structure
+ * nand_do_write_ops - [INTERN] NAND write with ECC
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operations description structure
  *
- * NAND write with ECC
+ * NAND write with ECC.
  */
 static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
 			     struct mtd_oob_ops *ops)
@@ -2141,36 +2339,35 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
 	uint32_t writelen = ops->len;
 
 	uint32_t oobwritelen = ops->ooblen;
-	uint32_t oobmaxlen = ops->mode == MTD_OOB_AUTO ?
+	uint32_t oobmaxlen = ops->mode == MTD_OPS_AUTO_OOB ?
 				mtd->oobavail : mtd->oobsize;
 
 	uint8_t *oob = ops->oobbuf;
 	uint8_t *buf = ops->datbuf;
-	int ret, subpage;
+	int ret;
+	int oob_required = oob ? 1 : 0;
 
 	ops->retlen = 0;
 	if (!writelen)
 		return 0;
 
-	/* reject writes, which are not page aligned */
+	/* Reject writes, which are not page aligned */
 	if (NOTALIGNED(to) || NOTALIGNED(ops->len)) {
-		printk(KERN_NOTICE "%s: Attempt to write not "
-				"page aligned data\n", __func__);
+		pr_notice("%s: attempt to write non page aligned data\n",
+			   __func__);
 		return -EINVAL;
 	}
 
 	column = to & (mtd->writesize - 1);
-	subpage = column || (writelen & (mtd->writesize - 1));
-
-	if (subpage && oob)
-		return -EINVAL;
 
 	chipnr = (int)(to >> chip->chip_shift);
 	chip->select_chip(mtd, chipnr);
 
 	/* Check, if it is write protected */
-	if (nand_check_wp(mtd))
-		return -EIO;
+	if (nand_check_wp(mtd)) {
+		ret = -EIO;
+		goto err_out;
+	}
 
 	realpage = (int)(to >> chip->page_shift);
 	page = realpage & chip->pagemask;
@@ -2181,23 +2378,33 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
 	    (chip->pagebuf << chip->page_shift) < (to + ops->len))
 		chip->pagebuf = -1;
 
-	/* If we're not given explicit OOB data, let it be 0xFF */
-	if (likely(!oob))
-		memset(chip->oob_poi, 0xff, mtd->oobsize);
-
 	/* Don't allow multipage oob writes with offset */
-	if (ops->ooboffs && (ops->ooboffs + ops->ooblen > oobmaxlen))
-		return -EINVAL;
+	if (oob && ops->ooboffs && (ops->ooboffs + ops->ooblen > oobmaxlen)) {
+		ret = -EINVAL;
+		goto err_out;
+	}
 
-	while(1) {
+	while (1) {
 		int bytes = mtd->writesize;
 		int cached = writelen > bytes && page != blockmask;
 		uint8_t *wbuf = buf;
+		int use_bufpoi;
+		int part_pagewr = (column || writelen < (mtd->writesize - 1));
+
+		if (part_pagewr)
+			use_bufpoi = 1;
+		else if (chip->options & NAND_USE_BOUNCE_BUFFER)
+			use_bufpoi = !virt_addr_valid(buf);
+		else
+			use_bufpoi = 0;
 
-		/* Partial page write ? */
-		if (unlikely(column || writelen < (mtd->writesize - 1))) {
+		/* Partial page write?, or need to use bounce buffer */
+		if (use_bufpoi) {
+			pr_debug("%s: using write bounce buffer for buf@%p\n",
+					 __func__, buf);
 			cached = 0;
-			bytes = min_t(int, bytes - column, (int) writelen);
+			if (part_pagewr)
+				bytes = min_t(int, bytes - column, writelen);
 			chip->pagebuf = -1;
 			memset(chip->buffers->databuf, 0xff, mtd->writesize);
 			memcpy(&chip->buffers->databuf[column], buf, bytes);
@@ -2206,12 +2413,15 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
 
 		if (unlikely(oob)) {
 			size_t len = min(oobwritelen, oobmaxlen);
-			oob = nand_fill_oob(chip, oob, len, ops);
+			oob = nand_fill_oob(mtd, oob, len, ops);
 			oobwritelen -= len;
+		} else {
+			/* We still need to erase leftover OOB data */
+			memset(chip->oob_poi, 0xff, mtd->oobsize);
 		}
-
-		ret = chip->write_page(mtd, chip, wbuf, page, cached,
-				       (ops->mode == MTD_OOB_RAW));
+		ret = chip->write_page(mtd, chip, column, bytes, wbuf,
+					oob_required, page, cached,
+					(ops->mode == MTD_OPS_RAW));
 		if (ret)
 			break;
 
@@ -2235,16 +2445,19 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
 	ops->retlen = ops->len - writelen;
 	if (unlikely(oob))
 		ops->oobretlen = ops->ooblen;
+
+err_out:
+	chip->select_chip(mtd, -1);
 	return ret;
 }
 
 /**
  * panic_nand_write - [MTD Interface] NAND write with ECC
- * @mtd:	MTD device structure
- * @to:		offset to write to
- * @len:	number of bytes to write
- * @retlen:	pointer to variable to store the number of written bytes
- * @buf:	the data to write
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @len: number of bytes to write
+ * @retlen: pointer to variable to store the number of written bytes
+ * @buf: the data to write
  *
  * NAND write with ECC. Used when performing writes in interrupt context, this
  * may for example be called by mtdoops when writing an oops while in panic.
@@ -2253,74 +2466,60 @@ static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len,
 			    size_t *retlen, const uint8_t *buf)
 {
 	struct nand_chip *chip = mtd->priv;
+	struct mtd_oob_ops ops;
 	int ret;
 
-	/* Do not allow reads past end of device */
-	if ((to + len) > mtd->size)
-		return -EINVAL;
-	if (!len)
-		return 0;
-
-	/* Wait for the device to get ready.  */
+	/* Wait for the device to get ready */
 	panic_nand_wait(mtd, chip, 400);
 
-	/* Grab the device.  */
+	/* Grab the device */
 	panic_nand_get_device(chip, mtd, FL_WRITING);
 
-	chip->ops.len = len;
-	chip->ops.datbuf = (uint8_t *)buf;
-	chip->ops.oobbuf = NULL;
+	ops.len = len;
+	ops.datbuf = (uint8_t *)buf;
+	ops.oobbuf = NULL;
+	ops.mode = MTD_OPS_PLACE_OOB;
 
-	ret = nand_do_write_ops(mtd, to, &chip->ops);
+	ret = nand_do_write_ops(mtd, to, &ops);
 
-	*retlen = chip->ops.retlen;
+	*retlen = ops.retlen;
 	return ret;
 }
 
 /**
  * nand_write - [MTD Interface] NAND write with ECC
- * @mtd:	MTD device structure
- * @to:		offset to write to
- * @len:	number of bytes to write
- * @retlen:	pointer to variable to store the number of written bytes
- * @buf:	the data to write
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @len: number of bytes to write
+ * @retlen: pointer to variable to store the number of written bytes
+ * @buf: the data to write
  *
- * NAND write with ECC
+ * NAND write with ECC.
  */
 static int nand_write(struct mtd_info *mtd, loff_t to, size_t len,
 			  size_t *retlen, const uint8_t *buf)
 {
-	struct nand_chip *chip = mtd->priv;
+	struct mtd_oob_ops ops;
 	int ret;
 
-	/* Do not allow reads past end of device */
-	if ((to + len) > mtd->size)
-		return -EINVAL;
-	if (!len)
-		return 0;
-
-	nand_get_device(chip, mtd, FL_WRITING);
-
-	chip->ops.len = len;
-	chip->ops.datbuf = (uint8_t *)buf;
-	chip->ops.oobbuf = NULL;
-
-	ret = nand_do_write_ops(mtd, to, &chip->ops);
-
-	*retlen = chip->ops.retlen;
-
+	nand_get_device(mtd, FL_WRITING);
+	ops.len = len;
+	ops.datbuf = (uint8_t *)buf;
+	ops.oobbuf = NULL;
+	ops.mode = MTD_OPS_PLACE_OOB;
+	ret = nand_do_write_ops(mtd, to, &ops);
+	*retlen = ops.retlen;
 	nand_release_device(mtd);
-
 	return ret;
 }
 
 /**
  * nand_do_write_oob - [MTD Interface] NAND write out-of-band
- * @mtd:	MTD device structure
- * @to:		offset to write to
- * @ops:	oob operation description structure
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operation description structure
  *
- * NAND write out-of-band
+ * NAND write out-of-band.
  */
 static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
 			     struct mtd_oob_ops *ops)
@@ -2328,34 +2527,34 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
 	int chipnr, page, status, len;
 	struct nand_chip *chip = mtd->priv;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
+	pr_debug("%s: to = 0x%08x, len = %i\n",
 			 __func__, (unsigned int)to, (int)ops->ooblen);
 
-	if (ops->mode == MTD_OOB_AUTO)
+	if (ops->mode == MTD_OPS_AUTO_OOB)
 		len = chip->ecc.layout->oobavail;
 	else
 		len = mtd->oobsize;
 
 	/* Do not allow write past end of page */
 	if ((ops->ooboffs + ops->ooblen) > len) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to write "
-				"past end of page\n", __func__);
+		pr_debug("%s: attempt to write past end of page\n",
+				__func__);
 		return -EINVAL;
 	}
 
 	if (unlikely(ops->ooboffs >= len)) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to start "
-				"write outside oob\n", __func__);
+		pr_debug("%s: attempt to start write outside oob\n",
+				__func__);
 		return -EINVAL;
 	}
 
-	/* Do not allow reads past end of device */
+	/* Do not allow write past end of device */
 	if (unlikely(to >= mtd->size ||
 		     ops->ooboffs + ops->ooblen >
 			((mtd->size >> chip->page_shift) -
 			 (to >> chip->page_shift)) * len)) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt write beyond "
-				"end of device\n", __func__);
+		pr_debug("%s: attempt to write beyond end of device\n",
+				__func__);
 		return -EINVAL;
 	}
 
@@ -2374,17 +2573,23 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
 	chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
 
 	/* Check, if it is write protected */
-	if (nand_check_wp(mtd))
+	if (nand_check_wp(mtd)) {
+		chip->select_chip(mtd, -1);
 		return -EROFS;
+	}
 
 	/* Invalidate the page cache, if we write to the cached page */
 	if (page == chip->pagebuf)
 		chip->pagebuf = -1;
 
-	memset(chip->oob_poi, 0xff, mtd->oobsize);
-	nand_fill_oob(chip, ops->oobbuf, ops->ooblen, ops);
-	status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask);
-	memset(chip->oob_poi, 0xff, mtd->oobsize);
+	nand_fill_oob(mtd, ops->oobbuf, ops->ooblen, ops);
+
+	if (ops->mode == MTD_OPS_RAW)
+		status = chip->ecc.write_oob_raw(mtd, chip, page & chip->pagemask);
+	else
+		status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask);
+
+	chip->select_chip(mtd, -1);
 
 	if (status)
 		return status;
@@ -2396,31 +2601,30 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
 
 /**
  * nand_write_oob - [MTD Interface] NAND write data and/or out-of-band
- * @mtd:	MTD device structure
- * @to:		offset to write to
- * @ops:	oob operation description structure
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operation description structure
  */
 static int nand_write_oob(struct mtd_info *mtd, loff_t to,
 			  struct mtd_oob_ops *ops)
 {
-	struct nand_chip *chip = mtd->priv;
 	int ret = -ENOTSUPP;
 
 	ops->retlen = 0;
 
 	/* Do not allow writes past end of device */
 	if (ops->datbuf && (to + ops->len) > mtd->size) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt write beyond "
-				"end of device\n", __func__);
+		pr_debug("%s: attempt to write beyond end of device\n",
+				__func__);
 		return -EINVAL;
 	}
 
-	nand_get_device(chip, mtd, FL_WRITING);
+	nand_get_device(mtd, FL_WRITING);
 
-	switch(ops->mode) {
-	case MTD_OOB_PLACE:
-	case MTD_OOB_AUTO:
-	case MTD_OOB_RAW:
+	switch (ops->mode) {
+	case MTD_OPS_PLACE_OOB:
+	case MTD_OPS_AUTO_OOB:
+	case MTD_OPS_RAW:
 		break;
 
 	default:
@@ -2432,86 +2636,64 @@ static int nand_write_oob(struct mtd_info *mtd, loff_t to,
 	else
 		ret = nand_do_write_ops(mtd, to, ops);
 
- out:
+out:
 	nand_release_device(mtd);
 	return ret;
 }
 
 /**
- * single_erease_cmd - [GENERIC] NAND standard block erase command function
- * @mtd:	MTD device structure
- * @page:	the page address of the block which will be erased
+ * single_erase - [GENERIC] NAND standard block erase command function
+ * @mtd: MTD device structure
+ * @page: the page address of the block which will be erased
  *
- * Standard erase command for NAND chips
+ * Standard erase command for NAND chips. Returns NAND status.
  */
-static void single_erase_cmd(struct mtd_info *mtd, int page)
+static int single_erase(struct mtd_info *mtd, int page)
 {
 	struct nand_chip *chip = mtd->priv;
 	/* Send commands to erase a block */
 	chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page);
 	chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1);
-}
 
-/**
- * multi_erease_cmd - [GENERIC] AND specific block erase command function
- * @mtd:	MTD device structure
- * @page:	the page address of the block which will be erased
- *
- * AND multi block erase command function
- * Erase 4 consecutive blocks
- */
-static void multi_erase_cmd(struct mtd_info *mtd, int page)
-{
-	struct nand_chip *chip = mtd->priv;
-	/* Send commands to erase a block */
-	chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page++);
-	chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page++);
-	chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page++);
-	chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page);
-	chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1);
+	return chip->waitfunc(mtd, chip);
 }
 
 /**
  * nand_erase - [MTD Interface] erase block(s)
- * @mtd:	MTD device structure
- * @instr:	erase instruction
+ * @mtd: MTD device structure
+ * @instr: erase instruction
  *
- * Erase one ore more blocks
+ * Erase one ore more blocks.
  */
 static int nand_erase(struct mtd_info *mtd, struct erase_info *instr)
 {
 	return nand_erase_nand(mtd, instr, 0);
 }
 
-#define BBT_PAGE_MASK	0xffffff3f
 /**
- * nand_erase_nand - [Internal] erase block(s)
- * @mtd:	MTD device structure
- * @instr:	erase instruction
- * @allowbbt:	allow erasing the bbt area
+ * nand_erase_nand - [INTERN] erase block(s)
+ * @mtd: MTD device structure
+ * @instr: erase instruction
+ * @allowbbt: allow erasing the bbt area
  *
- * Erase one ore more blocks
+ * Erase one ore more blocks.
  */
 int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
 		    int allowbbt)
 {
 	int page, status, pages_per_block, ret, chipnr;
 	struct nand_chip *chip = mtd->priv;
-	loff_t rewrite_bbt[NAND_MAX_CHIPS]={0};
-	unsigned int bbt_masked_page = 0xffffffff;
 	loff_t len;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: start = 0x%012llx, len = %llu\n",
-				__func__, (unsigned long long)instr->addr,
-				(unsigned long long)instr->len);
+	pr_debug("%s: start = 0x%012llx, len = %llu\n",
+			__func__, (unsigned long long)instr->addr,
+			(unsigned long long)instr->len);
 
 	if (check_offs_len(mtd, instr->addr, instr->len))
 		return -EINVAL;
 
-	instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
-
 	/* Grab the lock and see if the device is available */
-	nand_get_device(chip, mtd, FL_ERASING);
+	nand_get_device(mtd, FL_ERASING);
 
 	/* Shift to get first page */
 	page = (int)(instr->addr >> chip->page_shift);
@@ -2525,49 +2707,36 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
 
 	/* Check, if it is write protected */
 	if (nand_check_wp(mtd)) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: Device is write protected!!!\n",
-					__func__);
+		pr_debug("%s: device is write protected!\n",
+				__func__);
 		instr->state = MTD_ERASE_FAILED;
 		goto erase_exit;
 	}
 
-	/*
-	 * If BBT requires refresh, set the BBT page mask to see if the BBT
-	 * should be rewritten. Otherwise the mask is set to 0xffffffff which
-	 * can not be matched. This is also done when the bbt is actually
-	 * erased to avoid recusrsive updates
-	 */
-	if (chip->options & BBT_AUTO_REFRESH && !allowbbt)
-		bbt_masked_page = chip->bbt_td->pages[chipnr] & BBT_PAGE_MASK;
-
 	/* Loop through the pages */
 	len = instr->len;
 
 	instr->state = MTD_ERASING;
 
 	while (len) {
-		/*
-		 * heck if we have a bad block, we do not erase bad blocks !
-		 */
+		/* Check if we have a bad block, we do not erase bad blocks! */
 		if (nand_block_checkbad(mtd, ((loff_t) page) <<
 					chip->page_shift, 0, allowbbt)) {
-			printk(KERN_WARNING "%s: attempt to erase a bad block "
-					"at page 0x%08x\n", __func__, page);
+			pr_warn("%s: attempt to erase a bad block at page 0x%08x\n",
+				    __func__, page);
 			instr->state = MTD_ERASE_FAILED;
 			goto erase_exit;
 		}
 
 		/*
 		 * Invalidate the page cache, if we erase the block which
-		 * contains the current cached page
+		 * contains the current cached page.
 		 */
 		if (page <= chip->pagebuf && chip->pagebuf <
 		    (page + pages_per_block))
 			chip->pagebuf = -1;
 
-		chip->erase_cmd(mtd, page & chip->pagemask);
-
-		status = chip->waitfunc(mtd, chip);
+		status = chip->erase(mtd, page & chip->pagemask);
 
 		/*
 		 * See if operation failed and additional status checks are
@@ -2579,25 +2748,16 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
 
 		/* See if block erase succeeded */
 		if (status & NAND_STATUS_FAIL) {
-			DEBUG(MTD_DEBUG_LEVEL0, "%s: Failed erase, "
-					"page 0x%08x\n", __func__, page);
+			pr_debug("%s: failed erase, page 0x%08x\n",
+					__func__, page);
 			instr->state = MTD_ERASE_FAILED;
 			instr->fail_addr =
 				((loff_t)page << chip->page_shift);
 			goto erase_exit;
 		}
 
-		/*
-		 * If BBT requires refresh, set the BBT rewrite flag to the
-		 * page being erased
-		 */
-		if (bbt_masked_page != 0xffffffff &&
-		    (page & BBT_PAGE_MASK) == bbt_masked_page)
-			    rewrite_bbt[chipnr] =
-					((loff_t)page << chip->page_shift);
-
 		/* Increment page address and decrement length */
-		len -= (1 << chip->phys_erase_shift);
+		len -= (1ULL << chip->phys_erase_shift);
 		page += pages_per_block;
 
 		/* Check, if we cross a chip boundary */
@@ -2605,117 +2765,138 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
 			chipnr++;
 			chip->select_chip(mtd, -1);
 			chip->select_chip(mtd, chipnr);
-
-			/*
-			 * If BBT requires refresh and BBT-PERCHIP, set the BBT
-			 * page mask to see if this BBT should be rewritten
-			 */
-			if (bbt_masked_page != 0xffffffff &&
-			    (chip->bbt_td->options & NAND_BBT_PERCHIP))
-				bbt_masked_page = chip->bbt_td->pages[chipnr] &
-					BBT_PAGE_MASK;
 		}
 	}
 	instr->state = MTD_ERASE_DONE;
 
- erase_exit:
+erase_exit:
 
 	ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;
 
 	/* Deselect and wake up anyone waiting on the device */
+	chip->select_chip(mtd, -1);
 	nand_release_device(mtd);
 
 	/* Do call back function */
 	if (!ret)
 		mtd_erase_callback(instr);
 
-	/*
-	 * If BBT requires refresh and erase was successful, rewrite any
-	 * selected bad block tables
-	 */
-	if (bbt_masked_page == 0xffffffff || ret)
-		return ret;
-
-	for (chipnr = 0; chipnr < chip->numchips; chipnr++) {
-		if (!rewrite_bbt[chipnr])
-			continue;
-		/* update the BBT for chip */
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: nand_update_bbt "
-			"(%d:0x%0llx 0x%0x)\n", __func__, chipnr,
-			rewrite_bbt[chipnr], chip->bbt_td->pages[chipnr]);
-		nand_update_bbt(mtd, rewrite_bbt[chipnr]);
-	}
-
 	/* Return more or less happy */
 	return ret;
 }
 
 /**
  * nand_sync - [MTD Interface] sync
- * @mtd:	MTD device structure
+ * @mtd: MTD device structure
  *
- * Sync is actually a wait for chip ready function
+ * Sync is actually a wait for chip ready function.
  */
 static void nand_sync(struct mtd_info *mtd)
 {
-	struct nand_chip *chip = mtd->priv;
-
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: called\n", __func__);
+	pr_debug("%s: called\n", __func__);
 
 	/* Grab the lock and see if the device is available */
-	nand_get_device(chip, mtd, FL_SYNCING);
+	nand_get_device(mtd, FL_SYNCING);
 	/* Release it and go back */
 	nand_release_device(mtd);
 }
 
 /**
  * nand_block_isbad - [MTD Interface] Check if block at offset is bad
- * @mtd:	MTD device structure
- * @offs:	offset relative to mtd start
+ * @mtd: MTD device structure
+ * @offs: offset relative to mtd start
  */
 static int nand_block_isbad(struct mtd_info *mtd, loff_t offs)
 {
-	/* Check for invalid offset */
-	if (offs > mtd->size)
-		return -EINVAL;
-
 	return nand_block_checkbad(mtd, offs, 1, 0);
 }
 
 /**
  * nand_block_markbad - [MTD Interface] Mark block at the given offset as bad
- * @mtd:	MTD device structure
- * @ofs:	offset relative to mtd start
+ * @mtd: MTD device structure
+ * @ofs: offset relative to mtd start
  */
 static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
 {
-	struct nand_chip *chip = mtd->priv;
 	int ret;
 
-	if ((ret = nand_block_isbad(mtd, ofs))) {
-		/* If it was bad already, return success and do nothing. */
+	ret = nand_block_isbad(mtd, ofs);
+	if (ret) {
+		/* If it was bad already, return success and do nothing */
 		if (ret > 0)
 			return 0;
 		return ret;
 	}
 
-	return chip->block_markbad(mtd, ofs);
+	return nand_block_markbad_lowlevel(mtd, ofs);
+}
+
+/**
+ * nand_onfi_set_features- [REPLACEABLE] set features for ONFI nand
+ * @mtd: MTD device structure
+ * @chip: nand chip info structure
+ * @addr: feature address.
+ * @subfeature_param: the subfeature parameters, a four bytes array.
+ */
+static int nand_onfi_set_features(struct mtd_info *mtd, struct nand_chip *chip,
+			int addr, uint8_t *subfeature_param)
+{
+	int status;
+	int i;
+
+	if (!chip->onfi_version ||
+	    !(le16_to_cpu(chip->onfi_params.opt_cmd)
+	      & ONFI_OPT_CMD_SET_GET_FEATURES))
+		return -EINVAL;
+
+	chip->cmdfunc(mtd, NAND_CMD_SET_FEATURES, addr, -1);
+	for (i = 0; i < ONFI_SUBFEATURE_PARAM_LEN; ++i)
+		chip->write_byte(mtd, subfeature_param[i]);
+
+	status = chip->waitfunc(mtd, chip);
+	if (status & NAND_STATUS_FAIL)
+		return -EIO;
+	return 0;
+}
+
+/**
+ * nand_onfi_get_features- [REPLACEABLE] get features for ONFI nand
+ * @mtd: MTD device structure
+ * @chip: nand chip info structure
+ * @addr: feature address.
+ * @subfeature_param: the subfeature parameters, a four bytes array.
+ */
+static int nand_onfi_get_features(struct mtd_info *mtd, struct nand_chip *chip,
+			int addr, uint8_t *subfeature_param)
+{
+	int i;
+
+	if (!chip->onfi_version ||
+	    !(le16_to_cpu(chip->onfi_params.opt_cmd)
+	      & ONFI_OPT_CMD_SET_GET_FEATURES))
+		return -EINVAL;
+
+	/* clear the sub feature parameters */
+	memset(subfeature_param, 0, ONFI_SUBFEATURE_PARAM_LEN);
+
+	chip->cmdfunc(mtd, NAND_CMD_GET_FEATURES, addr, -1);
+	for (i = 0; i < ONFI_SUBFEATURE_PARAM_LEN; ++i)
+		*subfeature_param++ = chip->read_byte(mtd);
+	return 0;
 }
 
 /**
  * nand_suspend - [MTD Interface] Suspend the NAND flash
- * @mtd:	MTD device structure
+ * @mtd: MTD device structure
  */
 static int nand_suspend(struct mtd_info *mtd)
 {
-	struct nand_chip *chip = mtd->priv;
-
-	return nand_get_device(chip, mtd, FL_PM_SUSPENDED);
+	return nand_get_device(mtd, FL_PM_SUSPENDED);
 }
 
 /**
  * nand_resume - [MTD Interface] Resume the NAND flash
- * @mtd:	MTD device structure
+ * @mtd: MTD device structure
  */
 static void nand_resume(struct mtd_info *mtd)
 {
@@ -2724,13 +2905,11 @@ static void nand_resume(struct mtd_info *mtd)
 	if (chip->state == FL_PM_SUSPENDED)
 		nand_release_device(mtd);
 	else
-		printk(KERN_ERR "%s called for a chip which is not "
-		       "in suspended state\n", __func__);
+		pr_err("%s called for a chip which is not in suspended state\n",
+			__func__);
 }
 
-/*
- * Set default functions
- */
+/* Set default functions */
 static void nand_set_defaults(struct nand_chip *chip, int busw)
 {
 	/* check for proper chip_delay setup, set 20us if not */
@@ -2747,7 +2926,15 @@ static void nand_set_defaults(struct nand_chip *chip, int busw)
 
 	if (!chip->select_chip)
 		chip->select_chip = nand_select_chip;
-	if (!chip->read_byte)
+
+	/* set for ONFI nand */
+	if (!chip->onfi_set_features)
+		chip->onfi_set_features = nand_onfi_set_features;
+	if (!chip->onfi_get_features)
+		chip->onfi_get_features = nand_onfi_get_features;
+
+	/* If called twice, pointers that depend on busw may need to be reset */
+	if (!chip->read_byte || chip->read_byte == nand_read_byte)
 		chip->read_byte = busw ? nand_read_byte16 : nand_read_byte;
 	if (!chip->read_word)
 		chip->read_word = nand_read_word;
@@ -2755,12 +2942,12 @@ static void nand_set_defaults(struct nand_chip *chip, int busw)
 		chip->block_bad = nand_block_bad;
 	if (!chip->block_markbad)
 		chip->block_markbad = nand_default_block_markbad;
-	if (!chip->write_buf)
+	if (!chip->write_buf || chip->write_buf == nand_write_buf)
 		chip->write_buf = busw ? nand_write_buf16 : nand_write_buf;
-	if (!chip->read_buf)
+	if (!chip->write_byte || chip->write_byte == nand_write_byte)
+		chip->write_byte = busw ? nand_write_byte16 : nand_write_byte;
+	if (!chip->read_buf || chip->read_buf == nand_read_buf)
 		chip->read_buf = busw ? nand_read_buf16 : nand_read_buf;
-	if (!chip->verify_buf)
-		chip->verify_buf = busw ? nand_verify_buf16 : nand_verify_buf;
 	if (!chip->scan_bbt)
 		chip->scan_bbt = nand_default_bbt;
 
@@ -2772,15 +2959,627 @@ static void nand_set_defaults(struct nand_chip *chip, int busw)
 
 }
 
+/* Sanitize ONFI strings so we can safely print them */
+static void sanitize_string(uint8_t *s, size_t len)
+{
+	ssize_t i;
+
+	/* Null terminate */
+	s[len - 1] = 0;
+
+	/* Remove non printable chars */
+	for (i = 0; i < len - 1; i++) {
+		if (s[i] < ' ' || s[i] > 127)
+			s[i] = '?';
+	}
+
+	/* Remove trailing spaces */
+	strim(s);
+}
+
+static u16 onfi_crc16(u16 crc, u8 const *p, size_t len)
+{
+	int i;
+	while (len--) {
+		crc ^= *p++ << 8;
+		for (i = 0; i < 8; i++)
+			crc = (crc << 1) ^ ((crc & 0x8000) ? 0x8005 : 0);
+	}
+
+	return crc;
+}
+
+/* Parse the Extended Parameter Page. */
+static int nand_flash_detect_ext_param_page(struct mtd_info *mtd,
+		struct nand_chip *chip, struct nand_onfi_params *p)
+{
+	struct onfi_ext_param_page *ep;
+	struct onfi_ext_section *s;
+	struct onfi_ext_ecc_info *ecc;
+	uint8_t *cursor;
+	int ret = -EINVAL;
+	int len;
+	int i;
+
+	len = le16_to_cpu(p->ext_param_page_length) * 16;
+	ep = kmalloc(len, GFP_KERNEL);
+	if (!ep)
+		return -ENOMEM;
+
+	/* Send our own NAND_CMD_PARAM. */
+	chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
+
+	/* Use the Change Read Column command to skip the ONFI param pages. */
+	chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
+			sizeof(*p) * p->num_of_param_pages , -1);
+
+	/* Read out the Extended Parameter Page. */
+	chip->read_buf(mtd, (uint8_t *)ep, len);
+	if ((onfi_crc16(ONFI_CRC_BASE, ((uint8_t *)ep) + 2, len - 2)
+		!= le16_to_cpu(ep->crc))) {
+		pr_debug("fail in the CRC.\n");
+		goto ext_out;
+	}
+
+	/*
+	 * Check the signature.
+	 * Do not strictly follow the ONFI spec, maybe changed in future.
+	 */
+	if (strncmp(ep->sig, "EPPS", 4)) {
+		pr_debug("The signature is invalid.\n");
+		goto ext_out;
+	}
+
+	/* find the ECC section. */
+	cursor = (uint8_t *)(ep + 1);
+	for (i = 0; i < ONFI_EXT_SECTION_MAX; i++) {
+		s = ep->sections + i;
+		if (s->type == ONFI_SECTION_TYPE_2)
+			break;
+		cursor += s->length * 16;
+	}
+	if (i == ONFI_EXT_SECTION_MAX) {
+		pr_debug("We can not find the ECC section.\n");
+		goto ext_out;
+	}
+
+	/* get the info we want. */
+	ecc = (struct onfi_ext_ecc_info *)cursor;
+
+	if (!ecc->codeword_size) {
+		pr_debug("Invalid codeword size\n");
+		goto ext_out;
+	}
+
+	chip->ecc_strength_ds = ecc->ecc_bits;
+	chip->ecc_step_ds = 1 << ecc->codeword_size;
+	ret = 0;
+
+ext_out:
+	kfree(ep);
+	return ret;
+}
+
+static int nand_setup_read_retry_micron(struct mtd_info *mtd, int retry_mode)
+{
+	struct nand_chip *chip = mtd->priv;
+	uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {retry_mode};
+
+	return chip->onfi_set_features(mtd, chip, ONFI_FEATURE_ADDR_READ_RETRY,
+			feature);
+}
+
+/*
+ * Configure chip properties from Micron vendor-specific ONFI table
+ */
+static void nand_onfi_detect_micron(struct nand_chip *chip,
+		struct nand_onfi_params *p)
+{
+	struct nand_onfi_vendor_micron *micron = (void *)p->vendor;
+
+	if (le16_to_cpu(p->vendor_revision) < 1)
+		return;
+
+	chip->read_retries = micron->read_retry_options;
+	chip->setup_read_retry = nand_setup_read_retry_micron;
+}
+
+/*
+ * Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise.
+ */
+static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
+					int *busw)
+{
+	struct nand_onfi_params *p = &chip->onfi_params;
+	int i, j;
+	int val;
+
+	/* Try ONFI for unknown chip or LP */
+	chip->cmdfunc(mtd, NAND_CMD_READID, 0x20, -1);
+	if (chip->read_byte(mtd) != 'O' || chip->read_byte(mtd) != 'N' ||
+		chip->read_byte(mtd) != 'F' || chip->read_byte(mtd) != 'I')
+		return 0;
+
+	chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
+	for (i = 0; i < 3; i++) {
+		for (j = 0; j < sizeof(*p); j++)
+			((uint8_t *)p)[j] = chip->read_byte(mtd);
+		if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 254) ==
+				le16_to_cpu(p->crc)) {
+			break;
+		}
+	}
+
+	if (i == 3) {
+		pr_err("Could not find valid ONFI parameter page; aborting\n");
+		return 0;
+	}
+
+	/* Check version */
+	val = le16_to_cpu(p->revision);
+	if (val & (1 << 5))
+		chip->onfi_version = 23;
+	else if (val & (1 << 4))
+		chip->onfi_version = 22;
+	else if (val & (1 << 3))
+		chip->onfi_version = 21;
+	else if (val & (1 << 2))
+		chip->onfi_version = 20;
+	else if (val & (1 << 1))
+		chip->onfi_version = 10;
+
+	if (!chip->onfi_version) {
+		pr_info("unsupported ONFI version: %d\n", val);
+		return 0;
+	}
+
+	sanitize_string(p->manufacturer, sizeof(p->manufacturer));
+	sanitize_string(p->model, sizeof(p->model));
+	if (!mtd->name)
+		mtd->name = p->model;
+
+	mtd->writesize = le32_to_cpu(p->byte_per_page);
+
+	/*
+	 * pages_per_block and blocks_per_lun may not be a power-of-2 size
+	 * (don't ask me who thought of this...). MTD assumes that these
+	 * dimensions will be power-of-2, so just truncate the remaining area.
+	 */
+	mtd->erasesize = 1 << (fls(le32_to_cpu(p->pages_per_block)) - 1);
+	mtd->erasesize *= mtd->writesize;
+
+	mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page);
+
+	/* See erasesize comment */
+	chip->chipsize = 1 << (fls(le32_to_cpu(p->blocks_per_lun)) - 1);
+	chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count;
+	chip->bits_per_cell = p->bits_per_cell;
+
+	if (onfi_feature(chip) & ONFI_FEATURE_16_BIT_BUS)
+		*busw = NAND_BUSWIDTH_16;
+	else
+		*busw = 0;
+
+	if (p->ecc_bits != 0xff) {
+		chip->ecc_strength_ds = p->ecc_bits;
+		chip->ecc_step_ds = 512;
+	} else if (chip->onfi_version >= 21 &&
+		(onfi_feature(chip) & ONFI_FEATURE_EXT_PARAM_PAGE)) {
+
+		/*
+		 * The nand_flash_detect_ext_param_page() uses the
+		 * Change Read Column command which maybe not supported
+		 * by the chip->cmdfunc. So try to update the chip->cmdfunc
+		 * now. We do not replace user supplied command function.
+		 */
+		if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
+			chip->cmdfunc = nand_command_lp;
+
+		/* The Extended Parameter Page is supported since ONFI 2.1. */
+		if (nand_flash_detect_ext_param_page(mtd, chip, p))
+			pr_warn("Failed to detect ONFI extended param page\n");
+	} else {
+		pr_warn("Could not retrieve ONFI ECC requirements\n");
+	}
+
+	if (p->jedec_id == NAND_MFR_MICRON)
+		nand_onfi_detect_micron(chip, p);
+
+	return 1;
+}
+
 /*
- * Get the flash and manufacturer id and lookup if the type is supported
+ * Check if the NAND chip is JEDEC compliant, returns 1 if it is, 0 otherwise.
+ */
+static int nand_flash_detect_jedec(struct mtd_info *mtd, struct nand_chip *chip,
+					int *busw)
+{
+	struct nand_jedec_params *p = &chip->jedec_params;
+	struct jedec_ecc_info *ecc;
+	int val;
+	int i, j;
+
+	/* Try JEDEC for unknown chip or LP */
+	chip->cmdfunc(mtd, NAND_CMD_READID, 0x40, -1);
+	if (chip->read_byte(mtd) != 'J' || chip->read_byte(mtd) != 'E' ||
+		chip->read_byte(mtd) != 'D' || chip->read_byte(mtd) != 'E' ||
+		chip->read_byte(mtd) != 'C')
+		return 0;
+
+	chip->cmdfunc(mtd, NAND_CMD_PARAM, 0x40, -1);
+	for (i = 0; i < 3; i++) {
+		for (j = 0; j < sizeof(*p); j++)
+			((uint8_t *)p)[j] = chip->read_byte(mtd);
+
+		if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 510) ==
+				le16_to_cpu(p->crc))
+			break;
+	}
+
+	if (i == 3) {
+		pr_err("Could not find valid JEDEC parameter page; aborting\n");
+		return 0;
+	}
+
+	/* Check version */
+	val = le16_to_cpu(p->revision);
+	if (val & (1 << 2))
+		chip->jedec_version = 10;
+	else if (val & (1 << 1))
+		chip->jedec_version = 1; /* vendor specific version */
+
+	if (!chip->jedec_version) {
+		pr_info("unsupported JEDEC version: %d\n", val);
+		return 0;
+	}
+
+	sanitize_string(p->manufacturer, sizeof(p->manufacturer));
+	sanitize_string(p->model, sizeof(p->model));
+	if (!mtd->name)
+		mtd->name = p->model;
+
+	mtd->writesize = le32_to_cpu(p->byte_per_page);
+
+	/* Please reference to the comment for nand_flash_detect_onfi. */
+	mtd->erasesize = 1 << (fls(le32_to_cpu(p->pages_per_block)) - 1);
+	mtd->erasesize *= mtd->writesize;
+
+	mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page);
+
+	/* Please reference to the comment for nand_flash_detect_onfi. */
+	chip->chipsize = 1 << (fls(le32_to_cpu(p->blocks_per_lun)) - 1);
+	chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count;
+	chip->bits_per_cell = p->bits_per_cell;
+
+	if (jedec_feature(chip) & JEDEC_FEATURE_16_BIT_BUS)
+		*busw = NAND_BUSWIDTH_16;
+	else
+		*busw = 0;
+
+	/* ECC info */
+	ecc = &p->ecc_info[0];
+
+	if (ecc->codeword_size >= 9) {
+		chip->ecc_strength_ds = ecc->ecc_bits;
+		chip->ecc_step_ds = 1 << ecc->codeword_size;
+	} else {
+		pr_warn("Invalid codeword size\n");
+	}
+
+	return 1;
+}
+
+/*
+ * nand_id_has_period - Check if an ID string has a given wraparound period
+ * @id_data: the ID string
+ * @arrlen: the length of the @id_data array
+ * @period: the period of repitition
+ *
+ * Check if an ID string is repeated within a given sequence of bytes at
+ * specific repetition interval period (e.g., {0x20,0x01,0x7F,0x20} has a
+ * period of 3). This is a helper function for nand_id_len(). Returns non-zero
+ * if the repetition has a period of @period; otherwise, returns zero.
+ */
+static int nand_id_has_period(u8 *id_data, int arrlen, int period)
+{
+	int i, j;
+	for (i = 0; i < period; i++)
+		for (j = i + period; j < arrlen; j += period)
+			if (id_data[i] != id_data[j])
+				return 0;
+	return 1;
+}
+
+/*
+ * nand_id_len - Get the length of an ID string returned by CMD_READID
+ * @id_data: the ID string
+ * @arrlen: the length of the @id_data array
+
+ * Returns the length of the ID string, according to known wraparound/trailing
+ * zero patterns. If no pattern exists, returns the length of the array.
+ */
+static int nand_id_len(u8 *id_data, int arrlen)
+{
+	int last_nonzero, period;
+
+	/* Find last non-zero byte */
+	for (last_nonzero = arrlen - 1; last_nonzero >= 0; last_nonzero--)
+		if (id_data[last_nonzero])
+			break;
+
+	/* All zeros */
+	if (last_nonzero < 0)
+		return 0;
+
+	/* Calculate wraparound period */
+	for (period = 1; period < arrlen; period++)
+		if (nand_id_has_period(id_data, arrlen, period))
+			break;
+
+	/* There's a repeated pattern */
+	if (period < arrlen)
+		return period;
+
+	/* There are trailing zeros */
+	if (last_nonzero < arrlen - 1)
+		return last_nonzero + 1;
+
+	/* No pattern detected */
+	return arrlen;
+}
+
+/* Extract the bits of per cell from the 3rd byte of the extended ID */
+static int nand_get_bits_per_cell(u8 cellinfo)
+{
+	int bits;
+
+	bits = cellinfo & NAND_CI_CELLTYPE_MSK;
+	bits >>= NAND_CI_CELLTYPE_SHIFT;
+	return bits + 1;
+}
+
+/*
+ * Many new NAND share similar device ID codes, which represent the size of the
+ * chip. The rest of the parameters must be decoded according to generic or
+ * manufacturer-specific "extended ID" decoding patterns.
+ */
+static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip,
+				u8 id_data[8], int *busw)
+{
+	int extid, id_len;
+	/* The 3rd id byte holds MLC / multichip data */
+	chip->bits_per_cell = nand_get_bits_per_cell(id_data[2]);
+	/* The 4th id byte is the important one */
+	extid = id_data[3];
+
+	id_len = nand_id_len(id_data, 8);
+
+	/*
+	 * Field definitions are in the following datasheets:
+	 * Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32)
+	 * New Samsung (6 byte ID): Samsung K9GAG08U0F (p.44)
+	 * Hynix MLC   (6 byte ID): Hynix H27UBG8T2B (p.22)
+	 *
+	 * Check for ID length, non-zero 6th byte, cell type, and Hynix/Samsung
+	 * ID to decide what to do.
+	 */
+	if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG &&
+			!nand_is_slc(chip) && id_data[5] != 0x00) {
+		/* Calc pagesize */
+		mtd->writesize = 2048 << (extid & 0x03);
+		extid >>= 2;
+		/* Calc oobsize */
+		switch (((extid >> 2) & 0x04) | (extid & 0x03)) {
+		case 1:
+			mtd->oobsize = 128;
+			break;
+		case 2:
+			mtd->oobsize = 218;
+			break;
+		case 3:
+			mtd->oobsize = 400;
+			break;
+		case 4:
+			mtd->oobsize = 436;
+			break;
+		case 5:
+			mtd->oobsize = 512;
+			break;
+		case 6:
+			mtd->oobsize = 640;
+			break;
+		case 7:
+		default: /* Other cases are "reserved" (unknown) */
+			mtd->oobsize = 1024;
+			break;
+		}
+		extid >>= 2;
+		/* Calc blocksize */
+		mtd->erasesize = (128 * 1024) <<
+			(((extid >> 1) & 0x04) | (extid & 0x03));
+		*busw = 0;
+	} else if (id_len == 6 && id_data[0] == NAND_MFR_HYNIX &&
+			!nand_is_slc(chip)) {
+		unsigned int tmp;
+
+		/* Calc pagesize */
+		mtd->writesize = 2048 << (extid & 0x03);
+		extid >>= 2;
+		/* Calc oobsize */
+		switch (((extid >> 2) & 0x04) | (extid & 0x03)) {
+		case 0:
+			mtd->oobsize = 128;
+			break;
+		case 1:
+			mtd->oobsize = 224;
+			break;
+		case 2:
+			mtd->oobsize = 448;
+			break;
+		case 3:
+			mtd->oobsize = 64;
+			break;
+		case 4:
+			mtd->oobsize = 32;
+			break;
+		case 5:
+			mtd->oobsize = 16;
+			break;
+		default:
+			mtd->oobsize = 640;
+			break;
+		}
+		extid >>= 2;
+		/* Calc blocksize */
+		tmp = ((extid >> 1) & 0x04) | (extid & 0x03);
+		if (tmp < 0x03)
+			mtd->erasesize = (128 * 1024) << tmp;
+		else if (tmp == 0x03)
+			mtd->erasesize = 768 * 1024;
+		else
+			mtd->erasesize = (64 * 1024) << tmp;
+		*busw = 0;
+	} else {
+		/* Calc pagesize */
+		mtd->writesize = 1024 << (extid & 0x03);
+		extid >>= 2;
+		/* Calc oobsize */
+		mtd->oobsize = (8 << (extid & 0x01)) *
+			(mtd->writesize >> 9);
+		extid >>= 2;
+		/* Calc blocksize. Blocksize is multiples of 64KiB */
+		mtd->erasesize = (64 * 1024) << (extid & 0x03);
+		extid >>= 2;
+		/* Get buswidth information */
+		*busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
+
+		/*
+		 * Toshiba 24nm raw SLC (i.e., not BENAND) have 32B OOB per
+		 * 512B page. For Toshiba SLC, we decode the 5th/6th byte as
+		 * follows:
+		 * - ID byte 6, bits[2:0]: 100b -> 43nm, 101b -> 32nm,
+		 *                         110b -> 24nm
+		 * - ID byte 5, bit[7]:    1 -> BENAND, 0 -> raw SLC
+		 */
+		if (id_len >= 6 && id_data[0] == NAND_MFR_TOSHIBA &&
+				nand_is_slc(chip) &&
+				(id_data[5] & 0x7) == 0x6 /* 24nm */ &&
+				!(id_data[4] & 0x80) /* !BENAND */) {
+			mtd->oobsize = 32 * mtd->writesize >> 9;
+		}
+
+	}
+}
+
+/*
+ * Old devices have chip data hardcoded in the device ID table. nand_decode_id
+ * decodes a matching ID table entry and assigns the MTD size parameters for
+ * the chip.
+ */
+static void nand_decode_id(struct mtd_info *mtd, struct nand_chip *chip,
+				struct nand_flash_dev *type, u8 id_data[8],
+				int *busw)
+{
+	int maf_id = id_data[0];
+
+	mtd->erasesize = type->erasesize;
+	mtd->writesize = type->pagesize;
+	mtd->oobsize = mtd->writesize / 32;
+	*busw = type->options & NAND_BUSWIDTH_16;
+
+	/* All legacy ID NAND are small-page, SLC */
+	chip->bits_per_cell = 1;
+
+	/*
+	 * Check for Spansion/AMD ID + repeating 5th, 6th byte since
+	 * some Spansion chips have erasesize that conflicts with size
+	 * listed in nand_ids table.
+	 * Data sheet (5 byte ID): Spansion S30ML-P ORNAND (p.39)
+	 */
+	if (maf_id == NAND_MFR_AMD && id_data[4] != 0x00 && id_data[5] == 0x00
+			&& id_data[6] == 0x00 && id_data[7] == 0x00
+			&& mtd->writesize == 512) {
+		mtd->erasesize = 128 * 1024;
+		mtd->erasesize <<= ((id_data[3] & 0x03) << 1);
+	}
+}
+
+/*
+ * Set the bad block marker/indicator (BBM/BBI) patterns according to some
+ * heuristic patterns using various detected parameters (e.g., manufacturer,
+ * page size, cell-type information).
+ */
+static void nand_decode_bbm_options(struct mtd_info *mtd,
+				    struct nand_chip *chip, u8 id_data[8])
+{
+	int maf_id = id_data[0];
+
+	/* Set the bad block position */
+	if (mtd->writesize > 512 || (chip->options & NAND_BUSWIDTH_16))
+		chip->badblockpos = NAND_LARGE_BADBLOCK_POS;
+	else
+		chip->badblockpos = NAND_SMALL_BADBLOCK_POS;
+
+	/*
+	 * Bad block marker is stored in the last page of each block on Samsung
+	 * and Hynix MLC devices; stored in first two pages of each block on
+	 * Micron devices with 2KiB pages and on SLC Samsung, Hynix, Toshiba,
+	 * AMD/Spansion, and Macronix.  All others scan only the first page.
+	 */
+	if (!nand_is_slc(chip) &&
+			(maf_id == NAND_MFR_SAMSUNG ||
+			 maf_id == NAND_MFR_HYNIX))
+		chip->bbt_options |= NAND_BBT_SCANLASTPAGE;
+	else if ((nand_is_slc(chip) &&
+				(maf_id == NAND_MFR_SAMSUNG ||
+				 maf_id == NAND_MFR_HYNIX ||
+				 maf_id == NAND_MFR_TOSHIBA ||
+				 maf_id == NAND_MFR_AMD ||
+				 maf_id == NAND_MFR_MACRONIX)) ||
+			(mtd->writesize == 2048 &&
+			 maf_id == NAND_MFR_MICRON))
+		chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
+}
+
+static inline bool is_full_id_nand(struct nand_flash_dev *type)
+{
+	return type->id_len;
+}
+
+static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip,
+		   struct nand_flash_dev *type, u8 *id_data, int *busw)
+{
+	if (!strncmp(type->id, id_data, type->id_len)) {
+		mtd->writesize = type->pagesize;
+		mtd->erasesize = type->erasesize;
+		mtd->oobsize = type->oobsize;
+
+		chip->bits_per_cell = nand_get_bits_per_cell(id_data[2]);
+		chip->chipsize = (uint64_t)type->chipsize << 20;
+		chip->options |= type->options;
+		chip->ecc_strength_ds = NAND_ECC_STRENGTH(type);
+		chip->ecc_step_ds = NAND_ECC_STEP(type);
+
+		*busw = type->options & NAND_BUSWIDTH_16;
+
+		if (!mtd->name)
+			mtd->name = type->name;
+
+		return true;
+	}
+	return false;
+}
+
+/*
+ * Get the flash and manufacturer id and lookup if the type is supported.
  */
 static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
 						  struct nand_chip *chip,
-						  int busw, int *maf_id,
+						  int *maf_id, int *dev_id,
 						  struct nand_flash_dev *type)
 {
-	int i, dev_id, maf_idx;
+	int busw;
+	int i, maf_idx;
 	u8 id_data[8];
 
 	/* Select the device */
@@ -2788,7 +3587,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
 
 	/*
 	 * Reset the chip, required by some chips (e.g. Micron MT29FxGxxxxx)
-	 * after power-up
+	 * after power-up.
 	 */
 	chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
 
@@ -2797,9 +3596,10 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
 
 	/* Read manufacturer and device IDs */
 	*maf_id = chip->read_byte(mtd);
-	dev_id = chip->read_byte(mtd);
+	*dev_id = chip->read_byte(mtd);
 
-	/* Try again to make sure, as some systems the bus-hold or other
+	/*
+	 * Try again to make sure, as some systems the bus-hold or other
 	 * interface concerns can cause random data which looks like a
 	 * possibly credible NAND flash to appear. If the two results do
 	 * not match, ignore the device completely.
@@ -2808,23 +3608,37 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
 	chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
 
 	/* Read entire ID string */
-
 	for (i = 0; i < 8; i++)
 		id_data[i] = chip->read_byte(mtd);
 
-	if (id_data[0] != *maf_id || id_data[1] != dev_id) {
-		printk(KERN_INFO "%s: second ID read did not match "
-		       "%02x,%02x against %02x,%02x\n", __func__,
-		       *maf_id, dev_id, id_data[0], id_data[1]);
+	if (id_data[0] != *maf_id || id_data[1] != *dev_id) {
+		pr_info("second ID read did not match %02x,%02x against %02x,%02x\n",
+			*maf_id, *dev_id, id_data[0], id_data[1]);
 		return ERR_PTR(-ENODEV);
 	}
 
 	if (!type)
 		type = nand_flash_ids;
 
-	for (; type->name != NULL; type++)
-		if (dev_id == type->id)
-                        break;
+	for (; type->name != NULL; type++) {
+		if (is_full_id_nand(type)) {
+			if (find_full_id_nand(mtd, chip, type, id_data, &busw))
+				goto ident_done;
+		} else if (*dev_id == type->dev_id) {
+				break;
+		}
+	}
+
+	chip->onfi_version = 0;
+	if (!type->name || !type->pagesize) {
+		/* Check if the chip is ONFI compliant */
+		if (nand_flash_detect_onfi(mtd, chip, &busw))
+			goto ident_done;
+
+		/* Check if the chip is JEDEC compliant */
+		if (nand_flash_detect_jedec(mtd, chip, &busw))
+			goto ident_done;
+	}
 
 	if (!type->name)
 		return ERR_PTR(-ENODEV);
@@ -2834,58 +3648,25 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
 
 	chip->chipsize = (uint64_t)type->chipsize << 20;
 
-	/* Newer devices have all the information in additional id bytes */
-	if (!type->pagesize) {
-		int extid;
-		/* The 3rd id byte holds MLC / multichip data */
-		chip->cellinfo = id_data[2];
-		/* The 4th id byte is the important one */
-		extid = id_data[3];
-
-		/*
-		 * Field definitions are in the following datasheets:
-		 * Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32)
-		 * New style   (6 byte ID): Samsung K9GAG08U0D (p.40)
-		 *
-		 * Check for wraparound + Samsung ID + nonzero 6th byte
-		 * to decide what to do.
-		 */
-		if (id_data[0] == id_data[6] && id_data[1] == id_data[7] &&
-				id_data[0] == NAND_MFR_SAMSUNG &&
-				id_data[5] != 0x00) {
-			/* Calc pagesize */
-			mtd->writesize = 2048 << (extid & 0x03);
-			extid >>= 2;
-			/* Calc oobsize */
-			mtd->oobsize = (extid & 0x03) == 0x01 ? 128 : 218;
-			extid >>= 2;
-			/* Calc blocksize */
-			mtd->erasesize = (128 * 1024) <<
-				(((extid >> 1) & 0x04) | (extid & 0x03));
-			busw = 0;
-		} else {
-			/* Calc pagesize */
-			mtd->writesize = 1024 << (extid & 0x03);
-			extid >>= 2;
-			/* Calc oobsize */
-			mtd->oobsize = (8 << (extid & 0x01)) *
-				(mtd->writesize >> 9);
-			extid >>= 2;
-			/* Calc blocksize. Blocksize is multiples of 64KiB */
-			mtd->erasesize = (64 * 1024) << (extid & 0x03);
-			extid >>= 2;
-			/* Get buswidth information */
-			busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
-		}
+	if (!type->pagesize && chip->init_size) {
+		/* Set the pagesize, oobsize, erasesize by the driver */
+		busw = chip->init_size(mtd, chip, id_data);
+	} else if (!type->pagesize) {
+		/* Decode parameters from extended ID */
+		nand_decode_ext_id(mtd, chip, id_data, &busw);
 	} else {
-		/*
-		 * Old devices have chip data hardcoded in the device id table
-		 */
-		mtd->erasesize = type->erasesize;
-		mtd->writesize = type->pagesize;
-		mtd->oobsize = mtd->writesize / 32;
-		busw = type->options & NAND_BUSWIDTH_16;
+		nand_decode_id(mtd, chip, type, id_data, &busw);
 	}
+	/* Get chip options */
+	chip->options |= type->options;
+
+	/*
+	 * Check if chip is not a Samsung device. Do not clear the
+	 * options for chips which do not have an extended id.
+	 */
+	if (*maf_id != NAND_MFR_SAMSUNG && !type->pagesize)
+		chip->options &= ~NAND_SAMSUNG_LP_OPTIONS;
+ident_done:
 
 	/* Try to identify manufacturer */
 	for (maf_idx = 0; nand_manuf_ids[maf_idx].id != 0x0; maf_idx++) {
@@ -2893,111 +3674,100 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
 			break;
 	}
 
-	/*
-	 * Check, if buswidth is correct. Hardware drivers should set
-	 * chip correct !
-	 */
-	if (busw != (chip->options & NAND_BUSWIDTH_16)) {
-		printk(KERN_INFO "NAND device: Manufacturer ID:"
-		       " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id,
-		       dev_id, nand_manuf_ids[maf_idx].name, mtd->name);
-		printk(KERN_WARNING "NAND bus width %d instead %d bit\n",
-		       (chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
-		       busw ? 16 : 8);
+	if (chip->options & NAND_BUSWIDTH_AUTO) {
+		WARN_ON(chip->options & NAND_BUSWIDTH_16);
+		chip->options |= busw;
+		nand_set_defaults(chip, busw);
+	} else if (busw != (chip->options & NAND_BUSWIDTH_16)) {
+		/*
+		 * Check, if buswidth is correct. Hardware drivers should set
+		 * chip correct!
+		 */
+		pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n",
+			*maf_id, *dev_id);
+		pr_info("%s %s\n", nand_manuf_ids[maf_idx].name, mtd->name);
+		pr_warn("bus width %d instead %d bit\n",
+			   (chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
+			   busw ? 16 : 8);
 		return ERR_PTR(-EINVAL);
 	}
 
+	nand_decode_bbm_options(mtd, chip, id_data);
+
 	/* Calculate the address shift from the page size */
 	chip->page_shift = ffs(mtd->writesize) - 1;
-	/* Convert chipsize to number of pages per chip -1. */
+	/* Convert chipsize to number of pages per chip -1 */
 	chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
 
 	chip->bbt_erase_shift = chip->phys_erase_shift =
 		ffs(mtd->erasesize) - 1;
 	if (chip->chipsize & 0xffffffff)
 		chip->chip_shift = ffs((unsigned)chip->chipsize) - 1;
-	else
-		chip->chip_shift = ffs((unsigned)(chip->chipsize >> 32)) + 32 - 1;
+	else {
+		chip->chip_shift = ffs((unsigned)(chip->chipsize >> 32));
+		chip->chip_shift += 32 - 1;
+	}
 
-	/* Set the bad block position */
-	chip->badblockpos = mtd->writesize > 512 ?
-		NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS;
 	chip->badblockbits = 8;
+	chip->erase = single_erase;
 
-	/* Get chip options, preserve non chip based options */
-	chip->options &= ~NAND_CHIPOPTIONS_MSK;
-	chip->options |= type->options & NAND_CHIPOPTIONS_MSK;
-
-	/*
-	 * Set chip as a default. Board drivers can override it, if necessary
-	 */
-	chip->options |= NAND_NO_AUTOINCR;
-
-	/* Check if chip is a not a samsung device. Do not clear the
-	 * options for chips which are not having an extended id.
-	 */
-	if (*maf_id != NAND_MFR_SAMSUNG && !type->pagesize)
-		chip->options &= ~NAND_SAMSUNG_LP_OPTIONS;
-
-	/*
-	 * Bad block marker is stored in the last page of each block
-	 * on Samsung and Hynix MLC devices
-	 */
-	if ((chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
-			(*maf_id == NAND_MFR_SAMSUNG ||
-			 *maf_id == NAND_MFR_HYNIX))
-		chip->options |= NAND_BB_LAST_PAGE;
-
-	/* Check for AND chips with 4 page planes */
-	if (chip->options & NAND_4PAGE_ARRAY)
-		chip->erase_cmd = multi_erase_cmd;
-	else
-		chip->erase_cmd = single_erase_cmd;
-
-	/* Do not replace user supplied command function ! */
+	/* Do not replace user supplied command function! */
 	if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
 		chip->cmdfunc = nand_command_lp;
 
-	printk(KERN_INFO "NAND device: Manufacturer ID:"
-	       " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, dev_id,
-	       nand_manuf_ids[maf_idx].name, type->name);
+	pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n",
+		*maf_id, *dev_id);
+
+	if (chip->onfi_version)
+		pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
+				chip->onfi_params.model);
+	else if (chip->jedec_version)
+		pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
+				chip->jedec_params.model);
+	else
+		pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
+				type->name);
 
+	pr_info("%dMiB, %s, page size: %d, OOB size: %d\n",
+		(int)(chip->chipsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC",
+		mtd->writesize, mtd->oobsize);
 	return type;
 }
 
 /**
  * nand_scan_ident - [NAND Interface] Scan for the NAND device
- * @mtd:	     MTD device structure
- * @maxchips:	     Number of chips to scan for
- * @table:	     Alternative NAND ID table
+ * @mtd: MTD device structure
+ * @maxchips: number of chips to scan for
+ * @table: alternative NAND ID table
  *
- * This is the first phase of the normal nand_scan() function. It
- * reads the flash ID and sets up MTD fields accordingly.
+ * This is the first phase of the normal nand_scan() function. It reads the
+ * flash ID and sets up MTD fields accordingly.
  *
  * The mtd->owner field must be set to the module of the caller.
  */
 int nand_scan_ident(struct mtd_info *mtd, int maxchips,
 		    struct nand_flash_dev *table)
 {
-	int i, busw, nand_maf_id;
+	int i, nand_maf_id, nand_dev_id;
 	struct nand_chip *chip = mtd->priv;
 	struct nand_flash_dev *type;
 
-	/* Get buswidth to select the correct functions */
-	busw = chip->options & NAND_BUSWIDTH_16;
 	/* Set the default functions */
-	nand_set_defaults(chip, busw);
+	nand_set_defaults(chip, chip->options & NAND_BUSWIDTH_16);
 
 	/* Read the flash type */
-	type = nand_get_flash_type(mtd, chip, busw, &nand_maf_id, table);
+	type = nand_get_flash_type(mtd, chip, &nand_maf_id,
+				   &nand_dev_id, table);
 
 	if (IS_ERR(type)) {
 		if (!(chip->options & NAND_SCAN_SILENT_NODEV))
-			printk(KERN_WARNING "No NAND device found.\n");
+			pr_warn("No NAND device found\n");
 		chip->select_chip(mtd, -1);
 		return PTR_ERR(type);
 	}
 
+	chip->select_chip(mtd, -1);
+
 	/* Check for a chip array */
 	for (i = 1; i < maxchips; i++) {
 		chip->select_chip(mtd, i);
@@ -3007,11 +3777,14 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
 		chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
 		/* Read manufacturer and device IDs */
 		if (nand_maf_id != chip->read_byte(mtd) ||
-		    type->id != chip->read_byte(mtd))
+		    nand_dev_id != chip->read_byte(mtd)) {
+			chip->select_chip(mtd, -1);
 			break;
+		}
+		chip->select_chip(mtd, -1);
 	}
 	if (i > 1)
-		printk(KERN_INFO "%d NAND chips detected\n", i);
+		pr_info("%d chips detected\n", i);
 
 	/* Store the number of chips and calc total size for mtd */
 	chip->numchips = i;
@@ -3019,49 +3792,99 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
 
 	return 0;
 }
+EXPORT_SYMBOL(nand_scan_ident);
+
+/*
+ * Check if the chip configuration meet the datasheet requirements.
+
+ * If our configuration corrects A bits per B bytes and the minimum
+ * required correction level is X bits per Y bytes, then we must ensure
+ * both of the following are true:
+ *
+ * (1) A / B >= X / Y
+ * (2) A >= X
+ *
+ * Requirement (1) ensures we can correct for the required bitflip density.
+ * Requirement (2) ensures we can correct even when all bitflips are clumped
+ * in the same sector.
+ */
+static bool nand_ecc_strength_good(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+	int corr, ds_corr;
+
+	if (ecc->size == 0 || chip->ecc_step_ds == 0)
+		/* Not enough information */
+		return true;
 
+	/*
+	 * We get the number of corrected bits per page to compare
+	 * the correction density.
+	 */
+	corr = (mtd->writesize * ecc->strength) / ecc->size;
+	ds_corr = (mtd->writesize * chip->ecc_strength_ds) / chip->ecc_step_ds;
+
+	return corr >= ds_corr && ecc->strength >= chip->ecc_strength_ds;
+}
 
 /**
  * nand_scan_tail - [NAND Interface] Scan for the NAND device
- * @mtd:	    MTD device structure
+ * @mtd: MTD device structure
  *
- * This is the second phase of the normal nand_scan() function. It
- * fills out all the uninitialized function pointers with the defaults
- * and scans for a bad block table if appropriate.
+ * This is the second phase of the normal nand_scan() function. It fills out
+ * all the uninitialized function pointers with the defaults and scans for a
+ * bad block table if appropriate.
  */
 int nand_scan_tail(struct mtd_info *mtd)
 {
 	int i;
 	struct nand_chip *chip = mtd->priv;
-
-	if (!(chip->options & NAND_OWN_BUFFERS))
-		chip->buffers = kmalloc(sizeof(*chip->buffers), GFP_KERNEL);
-	if (!chip->buffers)
-		return -ENOMEM;
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+	struct nand_buffers *nbuf;
+
+	/* New bad blocks should be marked in OOB, flash-based BBT, or both */
+	BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) &&
+			!(chip->bbt_options & NAND_BBT_USE_FLASH));
+
+	if (!(chip->options & NAND_OWN_BUFFERS)) {
+		nbuf = kzalloc(sizeof(*nbuf) + mtd->writesize
+				+ mtd->oobsize * 3, GFP_KERNEL);
+		if (!nbuf)
+			return -ENOMEM;
+		nbuf->ecccalc = (uint8_t *)(nbuf + 1);
+		nbuf->ecccode = nbuf->ecccalc + mtd->oobsize;
+		nbuf->databuf = nbuf->ecccode + mtd->oobsize;
+
+		chip->buffers = nbuf;
+	} else {
+		if (!chip->buffers)
+			return -ENOMEM;
+	}
 
 	/* Set the internal oob buffer location, just after the page data */
 	chip->oob_poi = chip->buffers->databuf + mtd->writesize;
 
 	/*
-	 * If no default placement scheme is given, select an appropriate one
+	 * If no default placement scheme is given, select an appropriate one.
 	 */
-	if (!chip->ecc.layout) {
+	if (!ecc->layout && (ecc->mode != NAND_ECC_SOFT_BCH)) {
 		switch (mtd->oobsize) {
 		case 8:
-			chip->ecc.layout = &nand_oob_8;
+			ecc->layout = &nand_oob_8;
 			break;
 		case 16:
-			chip->ecc.layout = &nand_oob_16;
+			ecc->layout = &nand_oob_16;
 			break;
 		case 64:
-			chip->ecc.layout = &nand_oob_64;
+			ecc->layout = &nand_oob_64;
 			break;
 		case 128:
-			chip->ecc.layout = &nand_oob_128;
+			ecc->layout = &nand_oob_128;
 			break;
 		default:
-			printk(KERN_WARNING "No oob scheme defined for "
-			       "oobsize %d\n", mtd->oobsize);
+			pr_warn("No oob scheme defined for oobsize %d\n",
+				   mtd->oobsize);
 			BUG();
 		}
 	}
@@ -3070,132 +3893,179 @@ int nand_scan_tail(struct mtd_info *mtd)
 		chip->write_page = nand_write_page;
 
 	/*
-	 * check ECC mode, default to software if 3byte/512byte hardware ECC is
+	 * Check ECC mode, default to software if 3byte/512byte hardware ECC is
 	 * selected and we have 256 byte pagesize fallback to software ECC
 	 */
 
-	switch (chip->ecc.mode) {
+	switch (ecc->mode) {
 	case NAND_ECC_HW_OOB_FIRST:
 		/* Similar to NAND_ECC_HW, but a separate read_page handle */
-		if (!chip->ecc.calculate || !chip->ecc.correct ||
-		     !chip->ecc.hwctl) {
-			printk(KERN_WARNING "No ECC functions supplied; "
-			       "Hardware ECC not possible\n");
+		if (!ecc->calculate || !ecc->correct || !ecc->hwctl) {
+			pr_warn("No ECC functions supplied; "
+				   "hardware ECC not possible\n");
 			BUG();
 		}
-		if (!chip->ecc.read_page)
-			chip->ecc.read_page = nand_read_page_hwecc_oob_first;
+		if (!ecc->read_page)
+			ecc->read_page = nand_read_page_hwecc_oob_first;
 
 	case NAND_ECC_HW:
-		/* Use standard hwecc read page function ? */
-		if (!chip->ecc.read_page)
-			chip->ecc.read_page = nand_read_page_hwecc;
-		if (!chip->ecc.write_page)
-			chip->ecc.write_page = nand_write_page_hwecc;
-		if (!chip->ecc.read_page_raw)
-			chip->ecc.read_page_raw = nand_read_page_raw;
-		if (!chip->ecc.write_page_raw)
-			chip->ecc.write_page_raw = nand_write_page_raw;
-		if (!chip->ecc.read_oob)
-			chip->ecc.read_oob = nand_read_oob_std;
-		if (!chip->ecc.write_oob)
-			chip->ecc.write_oob = nand_write_oob_std;
+		/* Use standard hwecc read page function? */
+		if (!ecc->read_page)
+			ecc->read_page = nand_read_page_hwecc;
+		if (!ecc->write_page)
+			ecc->write_page = nand_write_page_hwecc;
+		if (!ecc->read_page_raw)
+			ecc->read_page_raw = nand_read_page_raw;
+		if (!ecc->write_page_raw)
+			ecc->write_page_raw = nand_write_page_raw;
+		if (!ecc->read_oob)
+			ecc->read_oob = nand_read_oob_std;
+		if (!ecc->write_oob)
+			ecc->write_oob = nand_write_oob_std;
+		if (!ecc->read_subpage)
+			ecc->read_subpage = nand_read_subpage;
+		if (!ecc->write_subpage)
+			ecc->write_subpage = nand_write_subpage_hwecc;
 
 	case NAND_ECC_HW_SYNDROME:
-		if ((!chip->ecc.calculate || !chip->ecc.correct ||
-		     !chip->ecc.hwctl) &&
-		    (!chip->ecc.read_page ||
-		     chip->ecc.read_page == nand_read_page_hwecc ||
-		     !chip->ecc.write_page ||
-		     chip->ecc.write_page == nand_write_page_hwecc)) {
-			printk(KERN_WARNING "No ECC functions supplied; "
-			       "Hardware ECC not possible\n");
+		if ((!ecc->calculate || !ecc->correct || !ecc->hwctl) &&
+		    (!ecc->read_page ||
+		     ecc->read_page == nand_read_page_hwecc ||
+		     !ecc->write_page ||
+		     ecc->write_page == nand_write_page_hwecc)) {
+			pr_warn("No ECC functions supplied; "
+				   "hardware ECC not possible\n");
 			BUG();
 		}
-		/* Use standard syndrome read/write page function ? */
-		if (!chip->ecc.read_page)
-			chip->ecc.read_page = nand_read_page_syndrome;
-		if (!chip->ecc.write_page)
-			chip->ecc.write_page = nand_write_page_syndrome;
-		if (!chip->ecc.read_page_raw)
-			chip->ecc.read_page_raw = nand_read_page_raw_syndrome;
-		if (!chip->ecc.write_page_raw)
-			chip->ecc.write_page_raw = nand_write_page_raw_syndrome;
-		if (!chip->ecc.read_oob)
-			chip->ecc.read_oob = nand_read_oob_syndrome;
-		if (!chip->ecc.write_oob)
-			chip->ecc.write_oob = nand_write_oob_syndrome;
-
-		if (mtd->writesize >= chip->ecc.size)
+		/* Use standard syndrome read/write page function? */
+		if (!ecc->read_page)
+			ecc->read_page = nand_read_page_syndrome;
+		if (!ecc->write_page)
+			ecc->write_page = nand_write_page_syndrome;
+		if (!ecc->read_page_raw)
+			ecc->read_page_raw = nand_read_page_raw_syndrome;
+		if (!ecc->write_page_raw)
+			ecc->write_page_raw = nand_write_page_raw_syndrome;
+		if (!ecc->read_oob)
+			ecc->read_oob = nand_read_oob_syndrome;
+		if (!ecc->write_oob)
+			ecc->write_oob = nand_write_oob_syndrome;
+
+		if (mtd->writesize >= ecc->size) {
+			if (!ecc->strength) {
+				pr_warn("Driver must set ecc.strength when using hardware ECC\n");
+				BUG();
+			}
 			break;
-		printk(KERN_WARNING "%d byte HW ECC not possible on "
-		       "%d byte page size, fallback to SW ECC\n",
-		       chip->ecc.size, mtd->writesize);
-		chip->ecc.mode = NAND_ECC_SOFT;
+		}
+		pr_warn("%d byte HW ECC not possible on "
+			   "%d byte page size, fallback to SW ECC\n",
+			   ecc->size, mtd->writesize);
+		ecc->mode = NAND_ECC_SOFT;
 
 	case NAND_ECC_SOFT:
-		chip->ecc.calculate = nand_calculate_ecc;
-		chip->ecc.correct = nand_correct_data;
-		chip->ecc.read_page = nand_read_page_swecc;
-		chip->ecc.read_subpage = nand_read_subpage;
-		chip->ecc.write_page = nand_write_page_swecc;
-		chip->ecc.read_page_raw = nand_read_page_raw;
-		chip->ecc.write_page_raw = nand_write_page_raw;
-		chip->ecc.read_oob = nand_read_oob_std;
-		chip->ecc.write_oob = nand_write_oob_std;
-		if (!chip->ecc.size)
-			chip->ecc.size = 256;
-		chip->ecc.bytes = 3;
+		ecc->calculate = nand_calculate_ecc;
+		ecc->correct = nand_correct_data;
+		ecc->read_page = nand_read_page_swecc;
+		ecc->read_subpage = nand_read_subpage;
+		ecc->write_page = nand_write_page_swecc;
+		ecc->read_page_raw = nand_read_page_raw;
+		ecc->write_page_raw = nand_write_page_raw;
+		ecc->read_oob = nand_read_oob_std;
+		ecc->write_oob = nand_write_oob_std;
+		if (!ecc->size)
+			ecc->size = 256;
+		ecc->bytes = 3;
+		ecc->strength = 1;
+		break;
+
+	case NAND_ECC_SOFT_BCH:
+		if (!mtd_nand_has_bch()) {
+			pr_warn("CONFIG_MTD_NAND_ECC_BCH not enabled\n");
+			BUG();
+		}
+		ecc->calculate = nand_bch_calculate_ecc;
+		ecc->correct = nand_bch_correct_data;
+		ecc->read_page = nand_read_page_swecc;
+		ecc->read_subpage = nand_read_subpage;
+		ecc->write_page = nand_write_page_swecc;
+		ecc->read_page_raw = nand_read_page_raw;
+		ecc->write_page_raw = nand_write_page_raw;
+		ecc->read_oob = nand_read_oob_std;
+		ecc->write_oob = nand_write_oob_std;
+		/*
+		 * Board driver should supply ecc.size and ecc.bytes values to
+		 * select how many bits are correctable; see nand_bch_init()
+		 * for details. Otherwise, default to 4 bits for large page
+		 * devices.
+		 */
+		if (!ecc->size && (mtd->oobsize >= 64)) {
+			ecc->size = 512;
+			ecc->bytes = 7;
+		}
+		ecc->priv = nand_bch_init(mtd, ecc->size, ecc->bytes,
+					       &ecc->layout);
+		if (!ecc->priv) {
+			pr_warn("BCH ECC initialization failed!\n");
+			BUG();
+		}
+		ecc->strength = ecc->bytes * 8 / fls(8 * ecc->size);
 		break;
 
 	case NAND_ECC_NONE:
-		printk(KERN_WARNING "NAND_ECC_NONE selected by board driver. "
-		       "This is not recommended !!\n");
-		chip->ecc.read_page = nand_read_page_raw;
-		chip->ecc.write_page = nand_write_page_raw;
-		chip->ecc.read_oob = nand_read_oob_std;
-		chip->ecc.read_page_raw = nand_read_page_raw;
-		chip->ecc.write_page_raw = nand_write_page_raw;
-		chip->ecc.write_oob = nand_write_oob_std;
-		chip->ecc.size = mtd->writesize;
-		chip->ecc.bytes = 0;
+		pr_warn("NAND_ECC_NONE selected by board driver. "
+			   "This is not recommended!\n");
+		ecc->read_page = nand_read_page_raw;
+		ecc->write_page = nand_write_page_raw;
+		ecc->read_oob = nand_read_oob_std;
+		ecc->read_page_raw = nand_read_page_raw;
+		ecc->write_page_raw = nand_write_page_raw;
+		ecc->write_oob = nand_write_oob_std;
+		ecc->size = mtd->writesize;
+		ecc->bytes = 0;
+		ecc->strength = 0;
 		break;
 
 	default:
-		printk(KERN_WARNING "Invalid NAND_ECC_MODE %d\n",
-		       chip->ecc.mode);
+		pr_warn("Invalid NAND_ECC_MODE %d\n", ecc->mode);
 		BUG();
 	}
 
+	/* For many systems, the standard OOB write also works for raw */
+	if (!ecc->read_oob_raw)
+		ecc->read_oob_raw = ecc->read_oob;
+	if (!ecc->write_oob_raw)
+		ecc->write_oob_raw = ecc->write_oob;
+
 	/*
 	 * The number of bytes available for a client to place data into
-	 * the out of band area
+	 * the out of band area.
 	 */
-	chip->ecc.layout->oobavail = 0;
-	for (i = 0; chip->ecc.layout->oobfree[i].length
-			&& i < ARRAY_SIZE(chip->ecc.layout->oobfree); i++)
-		chip->ecc.layout->oobavail +=
-			chip->ecc.layout->oobfree[i].length;
-	mtd->oobavail = chip->ecc.layout->oobavail;
+	ecc->layout->oobavail = 0;
+	for (i = 0; ecc->layout->oobfree[i].length
+			&& i < ARRAY_SIZE(ecc->layout->oobfree); i++)
+		ecc->layout->oobavail += ecc->layout->oobfree[i].length;
+	mtd->oobavail = ecc->layout->oobavail;
+
+	/* ECC sanity check: warn if it's too weak */
+	if (!nand_ecc_strength_good(mtd))
+		pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n",
+			mtd->name);
 
 	/*
 	 * Set the number of read / write steps for one page depending on ECC
-	 * mode
+	 * mode.
 	 */
-	chip->ecc.steps = mtd->writesize / chip->ecc.size;
-	if(chip->ecc.steps * chip->ecc.size != mtd->writesize) {
-		printk(KERN_WARNING "Invalid ecc parameters\n");
+	ecc->steps = mtd->writesize / ecc->size;
+	if (ecc->steps * ecc->size != mtd->writesize) {
+		pr_warn("Invalid ECC parameters\n");
 		BUG();
 	}
-	chip->ecc.total = chip->ecc.steps * chip->ecc.bytes;
+	ecc->total = ecc->steps * ecc->bytes;
 
-	/*
-	 * Allow subpage writes up to ecc.steps. Not possible for MLC
-	 * FLASH.
-	 */
-	if (!(chip->options & NAND_NO_SUBPAGE_WRITE) &&
-	    !(chip->cellinfo & NAND_CI_CELLTYPE_MSK)) {
-		switch(chip->ecc.steps) {
+	/* Allow subpage writes up to ecc.steps. Not possible for MLC flash */
+	if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && nand_is_slc(chip)) {
+		switch (ecc->steps) {
 		case 2:
 			mtd->subpage_sft = 1;
 			break;
@@ -3211,34 +4081,53 @@ int nand_scan_tail(struct mtd_info *mtd)
 	/* Initialize state */
 	chip->state = FL_READY;
 
-	/* De-select the device */
-	chip->select_chip(mtd, -1);
-
 	/* Invalidate the pagebuffer reference */
 	chip->pagebuf = -1;
 
+	/* Large page NAND with SOFT_ECC should support subpage reads */
+	switch (ecc->mode) {
+	case NAND_ECC_SOFT:
+	case NAND_ECC_SOFT_BCH:
+		if (chip->page_shift > 9)
+			chip->options |= NAND_SUBPAGE_READ;
+		break;
+
+	default:
+		break;
+	}
+
 	/* Fill in remaining MTD driver data */
-	mtd->type = MTD_NANDFLASH;
+	mtd->type = nand_is_slc(chip) ? MTD_NANDFLASH : MTD_MLCNANDFLASH;
 	mtd->flags = (chip->options & NAND_ROM) ? MTD_CAP_ROM :
 						MTD_CAP_NANDFLASH;
-	mtd->erase = nand_erase;
-	mtd->point = NULL;
-	mtd->unpoint = NULL;
-	mtd->read = nand_read;
-	mtd->write = nand_write;
-	mtd->panic_write = panic_nand_write;
-	mtd->read_oob = nand_read_oob;
-	mtd->write_oob = nand_write_oob;
-	mtd->sync = nand_sync;
-	mtd->lock = NULL;
-	mtd->unlock = NULL;
-	mtd->suspend = nand_suspend;
-	mtd->resume = nand_resume;
-	mtd->block_isbad = nand_block_isbad;
-	mtd->block_markbad = nand_block_markbad;
-
-	/* propagate ecc.layout to mtd_info */
-	mtd->ecclayout = chip->ecc.layout;
+	mtd->_erase = nand_erase;
+	mtd->_point = NULL;
+	mtd->_unpoint = NULL;
+	mtd->_read = nand_read;
+	mtd->_write = nand_write;
+	mtd->_panic_write = panic_nand_write;
+	mtd->_read_oob = nand_read_oob;
+	mtd->_write_oob = nand_write_oob;
+	mtd->_sync = nand_sync;
+	mtd->_lock = NULL;
+	mtd->_unlock = NULL;
+	mtd->_suspend = nand_suspend;
+	mtd->_resume = nand_resume;
+	mtd->_block_isbad = nand_block_isbad;
+	mtd->_block_markbad = nand_block_markbad;
+	mtd->writebufsize = mtd->writesize;
+
+	/* propagate ecc info to mtd_info */
+	mtd->ecclayout = ecc->layout;
+	mtd->ecc_strength = ecc->strength;
+	mtd->ecc_step_size = ecc->size;
+	/*
+	 * Initialize bitflip_threshold to its default prior scan_bbt() call.
+	 * scan_bbt() might invoke mtd_read(), thus bitflip_threshold must be
+	 * properly set.
+	 */
+	if (!mtd->bitflip_threshold)
+		mtd->bitflip_threshold = mtd->ecc_strength;
 
 	/* Check, if we should skip the bad block table scan */
 	if (chip->options & NAND_SKIP_BBTSCAN)
@@ -3247,10 +4136,13 @@ int nand_scan_tail(struct mtd_info *mtd)
 	/* Build bad block table */
 	return chip->scan_bbt(mtd);
 }
+EXPORT_SYMBOL(nand_scan_tail);
 
-/* is_module_text_address() isn't exported, and it's mostly a pointless
-   test if this is a module _anyway_ -- they'd have to try _really_ hard
-   to call us from in-kernel code if the core NAND support is modular. */
+/*
+ * is_module_text_address() isn't exported, and it's mostly a pointless
+ * test if this is a module _anyway_ -- they'd have to try _really_ hard
+ * to call us from in-kernel code if the core NAND support is modular.
+ */
 #ifdef MODULE
 #define caller_is_module() (1)
 #else
@@ -3260,15 +4152,13 @@ int nand_scan_tail(struct mtd_info *mtd)
 
 /**
  * nand_scan - [NAND Interface] Scan for the NAND device
- * @mtd:	MTD device structure
- * @maxchips:	Number of chips to scan for
- *
- * This fills out all the uninitialized function pointers
- * with the defaults.
- * The flash ID is read and the mtd/chip structures are
- * filled with the appropriate values.
- * The mtd->owner field must be set to the module of the caller
+ * @mtd: MTD device structure
+ * @maxchips: number of chips to scan for
  *
+ * This fills out all the uninitialized function pointers with the defaults.
+ * The flash ID is read and the mtd/chip structures are filled with the
+ * appropriate values. The mtd->owner field must be set to the module of the
+ * caller.
  */
 int nand_scan(struct mtd_info *mtd, int maxchips)
 {
@@ -3276,8 +4166,7 @@ int nand_scan(struct mtd_info *mtd, int maxchips)
 
 	/* Many callers got this wrong, so check for it for a while... */
 	if (!mtd->owner && caller_is_module()) {
-		printk(KERN_CRIT "%s called with NULL mtd->owner!\n",
-				__func__);
+		pr_crit("%s called with NULL mtd->owner!\n", __func__);
 		BUG();
 	}
 
@@ -3286,33 +4175,31 @@ int nand_scan(struct mtd_info *mtd, int maxchips)
 		ret = nand_scan_tail(mtd);
 	return ret;
 }
+EXPORT_SYMBOL(nand_scan);
 
 /**
  * nand_release - [NAND Interface] Free resources held by the NAND device
- * @mtd:	MTD device structure
-*/
+ * @mtd: MTD device structure
+ */
 void nand_release(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd->priv;
 
-#ifdef CONFIG_MTD_PARTITIONS
-	/* Deregister partitions */
-	del_mtd_partitions(mtd);
-#endif
-	/* Deregister the device */
-	del_mtd_device(mtd);
+	if (chip->ecc.mode == NAND_ECC_SOFT_BCH)
+		nand_bch_free((struct nand_bch_control *)chip->ecc.priv);
+
+	mtd_device_unregister(mtd);
 
 	/* Free bad block table memory */
 	kfree(chip->bbt);
 	if (!(chip->options & NAND_OWN_BUFFERS))
 		kfree(chip->buffers);
-}
 
-EXPORT_SYMBOL_GPL(nand_lock);
-EXPORT_SYMBOL_GPL(nand_unlock);
-EXPORT_SYMBOL_GPL(nand_scan);
-EXPORT_SYMBOL_GPL(nand_scan_ident);
-EXPORT_SYMBOL_GPL(nand_scan_tail);
+	/* Free bad block descriptor memory */
+	if (chip->badblock_pattern && chip->badblock_pattern->options
+			& NAND_BBT_DYNAMICSTRUCT)
+		kfree(chip->badblock_pattern);
+}
 EXPORT_SYMBOL_GPL(nand_release);
 
 static int __init nand_base_init(void)
@@ -3330,5 +4217,6 @@ module_init(nand_base_init);
 module_exit(nand_base_exit);
 
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Steven J. Hill <sjhill@realitydiluted.com>, Thomas Gleixner <tglx@linutronix.de>");
+MODULE_AUTHOR("Steven J. Hill <sjhill@realitydiluted.com>");
+MODULE_AUTHOR("Thomas Gleixner <tglx@linutronix.de>");
 MODULE_DESCRIPTION("Generic NAND flash driver code");
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index ad97c0ce73b..7f0c3b4c2a4 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -4,7 +4,7 @@
  *  Overview:
  *   Bad block table support for the NAND driver
  *
- *  Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de)
+ *  Copyright © 2004 Thomas Gleixner (tglx@linutronix.de)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -13,28 +13,37 @@
  * Description:
  *
  * When nand_scan_bbt is called, then it tries to find the bad block table
- * depending on the options in the bbt descriptor(s). If a bbt is found
- * then the contents are read and the memory based bbt is created. If a
- * mirrored bbt is selected then the mirror is searched too and the
- * versions are compared. If the mirror has a greater version number
- * than the mirror bbt is used to build the memory based bbt.
+ * depending on the options in the BBT descriptor(s). If no flash based BBT
+ * (NAND_BBT_USE_FLASH) is specified then the device is scanned for factory
+ * marked good / bad blocks. This information is used to create a memory BBT.
+ * Once a new bad block is discovered then the "factory" information is updated
+ * on the device.
+ * If a flash based BBT is specified then the function first tries to find the
+ * BBT on flash. If a BBT is found then the contents are read and the memory
+ * based BBT is created. If a mirrored BBT is selected then the mirror is
+ * searched too and the versions are compared. If the mirror has a greater
+ * version number, then the mirror BBT is used to build the memory based BBT.
  * If the tables are not versioned, then we "or" the bad block information.
- * If one of the bbt's is out of date or does not exist it is (re)created.
- * If no bbt exists at all then the device is scanned for factory marked
+ * If one of the BBTs is out of date or does not exist it is (re)created.
+ * If no BBT exists at all then the device is scanned for factory marked
  * good / bad blocks and the bad block tables are created.
  *
- * For manufacturer created bbts like the one found on M-SYS DOC devices
- * the bbt is searched and read but never created
+ * For manufacturer created BBTs like the one found on M-SYS DOC devices
+ * the BBT is searched and read but never created
  *
- * The autogenerated bad block table is located in the last good blocks
+ * The auto generated bad block table is located in the last good blocks
  * of the device. The table is mirrored, so it can be updated eventually.
- * The table is marked in the oob area with an ident pattern and a version
- * number which indicates which of both tables is more up to date.
+ * The table is marked in the OOB area with an ident pattern and a version
+ * number which indicates which of both tables is more up to date. If the NAND
+ * controller needs the complete OOB area for the ECC information then the
+ * option NAND_BBT_NO_OOB should be used (along with NAND_BBT_USE_FLASH, of
+ * course): it moves the ident pattern and the version byte into the data area
+ * and the OOB area will remain untouched.
  *
  * The table uses 2 bits per block
- * 11b: 	block is good
- * 00b: 	block is factory marked bad
- * 01b, 10b: 	block is marked bad due to wear
+ * 11b:		block is good
+ * 00b:		block is factory marked bad
+ * 01b, 10b:	block is marked bad due to wear
  *
  * The memory bad block table uses the following scheme:
  * 00b:		block is good
@@ -53,298 +62,359 @@
 #include <linux/slab.h>
 #include <linux/types.h>
 #include <linux/mtd/mtd.h>
+#include <linux/mtd/bbm.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/compatmac.h>
 #include <linux/bitops.h>
 #include <linux/delay.h>
 #include <linux/vmalloc.h>
+#include <linux/export.h>
+#include <linux/string.h>
+
+#define BBT_BLOCK_GOOD		0x00
+#define BBT_BLOCK_WORN		0x01
+#define BBT_BLOCK_RESERVED	0x02
+#define BBT_BLOCK_FACTORY_BAD	0x03
+
+#define BBT_ENTRY_MASK		0x03
+#define BBT_ENTRY_SHIFT		2
+
+static int nand_update_bbt(struct mtd_info *mtd, loff_t offs);
+
+static inline uint8_t bbt_get_entry(struct nand_chip *chip, int block)
+{
+	uint8_t entry = chip->bbt[block >> BBT_ENTRY_SHIFT];
+	entry >>= (block & BBT_ENTRY_MASK) * 2;
+	return entry & BBT_ENTRY_MASK;
+}
+
+static inline void bbt_mark_entry(struct nand_chip *chip, int block,
+		uint8_t mark)
+{
+	uint8_t msk = (mark & BBT_ENTRY_MASK) << ((block & BBT_ENTRY_MASK) * 2);
+	chip->bbt[block >> BBT_ENTRY_SHIFT] |= msk;
+}
+
+static int check_pattern_no_oob(uint8_t *buf, struct nand_bbt_descr *td)
+{
+	if (memcmp(buf, td->pattern, td->len))
+		return -1;
+	return 0;
+}
 
 /**
  * check_pattern - [GENERIC] check if a pattern is in the buffer
- * @buf:	the buffer to search
- * @len:	the length of buffer to search
- * @paglen:	the pagelength
- * @td:		search pattern descriptor
- *
- * Check for a pattern at the given place. Used to search bad block
- * tables and good / bad block identifiers.
- * If the SCAN_EMPTY option is set then check, if all bytes except the
- * pattern area contain 0xff
+ * @buf: the buffer to search
+ * @len: the length of buffer to search
+ * @paglen: the pagelength
+ * @td: search pattern descriptor
  *
-*/
+ * Check for a pattern at the given place. Used to search bad block tables and
+ * good / bad block identifiers.
+ */
 static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td)
 {
-	int i, end = 0;
-	uint8_t *p = buf;
-
-	end = paglen + td->offs;
-	if (td->options & NAND_BBT_SCANEMPTY) {
-		for (i = 0; i < end; i++) {
-			if (p[i] != 0xff)
-				return -1;
-		}
-	}
-	p += end;
+	if (td->options & NAND_BBT_NO_OOB)
+		return check_pattern_no_oob(buf, td);
 
 	/* Compare the pattern */
-	for (i = 0; i < td->len; i++) {
-		if (p[i] != td->pattern[i])
-			return -1;
-	}
+	if (memcmp(buf + paglen + td->offs, td->pattern, td->len))
+		return -1;
 
-	if (td->options & NAND_BBT_SCANEMPTY) {
-		p += td->len;
-		end += td->len;
-		for (i = end; i < len; i++) {
-			if (*p++ != 0xff)
-				return -1;
-		}
-	}
 	return 0;
 }
 
 /**
  * check_short_pattern - [GENERIC] check if a pattern is in the buffer
- * @buf:	the buffer to search
- * @td:		search pattern descriptor
- *
- * Check for a pattern at the given place. Used to search bad block
- * tables and good / bad block identifiers. Same as check_pattern, but
- * no optional empty check
+ * @buf: the buffer to search
+ * @td:	search pattern descriptor
  *
-*/
+ * Check for a pattern at the given place. Used to search bad block tables and
+ * good / bad block identifiers. Same as check_pattern, but no optional empty
+ * check.
+ */
 static int check_short_pattern(uint8_t *buf, struct nand_bbt_descr *td)
 {
-	int i;
-	uint8_t *p = buf;
-
 	/* Compare the pattern */
-	for (i = 0; i < td->len; i++) {
-		if (p[td->offs + i] != td->pattern[i])
-			return -1;
-	}
+	if (memcmp(buf + td->offs, td->pattern, td->len))
+		return -1;
 	return 0;
 }
 
 /**
+ * add_marker_len - compute the length of the marker in data area
+ * @td: BBT descriptor used for computation
+ *
+ * The length will be 0 if the marker is located in OOB area.
+ */
+static u32 add_marker_len(struct nand_bbt_descr *td)
+{
+	u32 len;
+
+	if (!(td->options & NAND_BBT_NO_OOB))
+		return 0;
+
+	len = td->len;
+	if (td->options & NAND_BBT_VERSION)
+		len++;
+	return len;
+}
+
+/**
  * read_bbt - [GENERIC] Read the bad block table starting from page
- * @mtd:	MTD device structure
- * @buf:	temporary buffer
- * @page:	the starting page
- * @num:	the number of bbt descriptors to read
- * @bits:	number of bits per block
- * @offs:	offset in the memory table
- * @reserved_block_code:	Pattern to identify reserved blocks
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @page: the starting page
+ * @num: the number of bbt descriptors to read
+ * @td: the bbt describtion table
+ * @offs: block number offset in the table
  *
  * Read the bad block table starting from page.
- *
  */
 static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num,
-		    int bits, int offs, int reserved_block_code)
+		struct nand_bbt_descr *td, int offs)
 {
-	int res, i, j, act = 0;
+	int res, ret = 0, i, j, act = 0;
 	struct nand_chip *this = mtd->priv;
 	size_t retlen, len, totlen;
 	loff_t from;
-	uint8_t msk = (uint8_t) ((1 << bits) - 1);
+	int bits = td->options & NAND_BBT_NRBITS_MSK;
+	uint8_t msk = (uint8_t)((1 << bits) - 1);
+	u32 marker_len;
+	int reserved_block_code = td->reserved_block_code;
 
 	totlen = (num * bits) >> 3;
-	from = ((loff_t) page) << this->page_shift;
+	marker_len = add_marker_len(td);
+	from = ((loff_t)page) << this->page_shift;
 
 	while (totlen) {
-		len = min(totlen, (size_t) (1 << this->bbt_erase_shift));
-		res = mtd->read(mtd, from, len, &retlen, buf);
+		len = min(totlen, (size_t)(1 << this->bbt_erase_shift));
+		if (marker_len) {
+			/*
+			 * In case the BBT marker is not in the OOB area it
+			 * will be just in the first page.
+			 */
+			len -= marker_len;
+			from += marker_len;
+			marker_len = 0;
+		}
+		res = mtd_read(mtd, from, len, &retlen, buf);
 		if (res < 0) {
-			if (retlen != len) {
-				printk(KERN_INFO "nand_bbt: Error reading bad block table\n");
+			if (mtd_is_eccerr(res)) {
+				pr_info("nand_bbt: ECC error in BBT at "
+					"0x%012llx\n", from & ~mtd->writesize);
+				return res;
+			} else if (mtd_is_bitflip(res)) {
+				pr_info("nand_bbt: corrected error in BBT at "
+					"0x%012llx\n", from & ~mtd->writesize);
+				ret = res;
+			} else {
+				pr_info("nand_bbt: error reading BBT\n");
 				return res;
 			}
-			printk(KERN_WARNING "nand_bbt: ECC error while reading bad block table\n");
 		}
 
 		/* Analyse data */
 		for (i = 0; i < len; i++) {
 			uint8_t dat = buf[i];
-			for (j = 0; j < 8; j += bits, act += 2) {
+			for (j = 0; j < 8; j += bits, act++) {
 				uint8_t tmp = (dat >> j) & msk;
 				if (tmp == msk)
 					continue;
 				if (reserved_block_code && (tmp == reserved_block_code)) {
-					printk(KERN_DEBUG "nand_read_bbt: Reserved block at 0x%012llx\n",
-					       (loff_t)((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
-					this->bbt[offs + (act >> 3)] |= 0x2 << (act & 0x06);
+					pr_info("nand_read_bbt: reserved block at 0x%012llx\n",
+						 (loff_t)(offs + act) <<
+						 this->bbt_erase_shift);
+					bbt_mark_entry(this, offs + act,
+							BBT_BLOCK_RESERVED);
 					mtd->ecc_stats.bbtblocks++;
 					continue;
 				}
-				/* Leave it for now, if its matured we can move this
-				 * message to MTD_DEBUG_LEVEL0 */
-				printk(KERN_DEBUG "nand_read_bbt: Bad block at 0x%012llx\n",
-				       (loff_t)((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
-				/* Factory marked bad or worn out ? */
+				/*
+				 * Leave it for now, if it's matured we can
+				 * move this message to pr_debug.
+				 */
+				pr_info("nand_read_bbt: bad block at 0x%012llx\n",
+					 (loff_t)(offs + act) <<
+					 this->bbt_erase_shift);
+				/* Factory marked bad or worn out? */
 				if (tmp == 0)
-					this->bbt[offs + (act >> 3)] |= 0x3 << (act & 0x06);
+					bbt_mark_entry(this, offs + act,
+							BBT_BLOCK_FACTORY_BAD);
 				else
-					this->bbt[offs + (act >> 3)] |= 0x1 << (act & 0x06);
+					bbt_mark_entry(this, offs + act,
+							BBT_BLOCK_WORN);
 				mtd->ecc_stats.badblocks++;
 			}
 		}
 		totlen -= len;
 		from += len;
 	}
-	return 0;
+	return ret;
 }
 
 /**
  * read_abs_bbt - [GENERIC] Read the bad block table starting at a given page
- * @mtd:	MTD device structure
- * @buf:	temporary buffer
- * @td:		descriptor for the bad block table
- * @chip:	read the table for a specific chip, -1 read all chips.
- *		Applies only if NAND_BBT_PERCHIP option is set
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @chip: read the table for a specific chip, -1 read all chips; applies only if
+ *        NAND_BBT_PERCHIP option is set
  *
- * Read the bad block table for all chips starting at a given page
- * We assume that the bbt bits are in consecutive order.
-*/
+ * Read the bad block table for all chips starting at a given page. We assume
+ * that the bbt bits are in consecutive order.
+ */
 static int read_abs_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, int chip)
 {
 	struct nand_chip *this = mtd->priv;
 	int res = 0, i;
-	int bits;
 
-	bits = td->options & NAND_BBT_NRBITS_MSK;
 	if (td->options & NAND_BBT_PERCHIP) {
 		int offs = 0;
 		for (i = 0; i < this->numchips; i++) {
 			if (chip == -1 || chip == i)
-				res = read_bbt (mtd, buf, td->pages[i], this->chipsize >> this->bbt_erase_shift, bits, offs, td->reserved_block_code);
+				res = read_bbt(mtd, buf, td->pages[i],
+					this->chipsize >> this->bbt_erase_shift,
+					td, offs);
 			if (res)
 				return res;
-			offs += this->chipsize >> (this->bbt_erase_shift + 2);
+			offs += this->chipsize >> this->bbt_erase_shift;
 		}
 	} else {
-		res = read_bbt (mtd, buf, td->pages[0], mtd->size >> this->bbt_erase_shift, bits, 0, td->reserved_block_code);
+		res = read_bbt(mtd, buf, td->pages[0],
+				mtd->size >> this->bbt_erase_shift, td, 0);
 		if (res)
 			return res;
 	}
 	return 0;
 }
 
-/*
- * Scan read raw data from flash
+/* BBT marker is in the first page, no OOB */
+static int scan_read_data(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
+			 struct nand_bbt_descr *td)
+{
+	size_t retlen;
+	size_t len;
+
+	len = td->len;
+	if (td->options & NAND_BBT_VERSION)
+		len++;
+
+	return mtd_read(mtd, offs, len, &retlen, buf);
+}
+
+/**
+ * scan_read_oob - [GENERIC] Scan data+OOB region to buffer
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @offs: offset at which to scan
+ * @len: length of data region to read
+ *
+ * Scan read data from data+OOB. May traverse multiple pages, interleaving
+ * page,OOB,page,OOB,... in buf. Completes transfer and returns the "strongest"
+ * ECC condition (error or bitflip). May quit on the first (non-ECC) error.
  */
-static int scan_read_raw(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
+static int scan_read_oob(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
 			 size_t len)
 {
 	struct mtd_oob_ops ops;
-	int res;
+	int res, ret = 0;
 
-	ops.mode = MTD_OOB_RAW;
+	ops.mode = MTD_OPS_PLACE_OOB;
 	ops.ooboffs = 0;
 	ops.ooblen = mtd->oobsize;
 
-
 	while (len > 0) {
-		if (len <= mtd->writesize) {
-			ops.oobbuf = buf + len;
-			ops.datbuf = buf;
-			ops.len = len;
-			return mtd->read_oob(mtd, offs, &ops);
-		} else {
-			ops.oobbuf = buf + mtd->writesize;
-			ops.datbuf = buf;
-			ops.len = mtd->writesize;
-			res = mtd->read_oob(mtd, offs, &ops);
+		ops.datbuf = buf;
+		ops.len = min(len, (size_t)mtd->writesize);
+		ops.oobbuf = buf + ops.len;
 
-			if (res)
+		res = mtd_read_oob(mtd, offs, &ops);
+		if (res) {
+			if (!mtd_is_bitflip_or_eccerr(res))
 				return res;
+			else if (mtd_is_eccerr(res) || !ret)
+				ret = res;
 		}
 
 		buf += mtd->oobsize + mtd->writesize;
 		len -= mtd->writesize;
+		offs += mtd->writesize;
 	}
-	return 0;
+	return ret;
 }
 
-/*
- * Scan write data with oob to flash
- */
+static int scan_read(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
+			 size_t len, struct nand_bbt_descr *td)
+{
+	if (td->options & NAND_BBT_NO_OOB)
+		return scan_read_data(mtd, buf, offs, td);
+	else
+		return scan_read_oob(mtd, buf, offs, len);
+}
+
+/* Scan write data with oob to flash */
 static int scan_write_bbt(struct mtd_info *mtd, loff_t offs, size_t len,
 			  uint8_t *buf, uint8_t *oob)
 {
 	struct mtd_oob_ops ops;
 
-	ops.mode = MTD_OOB_PLACE;
+	ops.mode = MTD_OPS_PLACE_OOB;
 	ops.ooboffs = 0;
 	ops.ooblen = mtd->oobsize;
 	ops.datbuf = buf;
 	ops.oobbuf = oob;
 	ops.len = len;
 
-	return mtd->write_oob(mtd, offs, &ops);
+	return mtd_write_oob(mtd, offs, &ops);
+}
+
+static u32 bbt_get_ver_offs(struct mtd_info *mtd, struct nand_bbt_descr *td)
+{
+	u32 ver_offs = td->veroffs;
+
+	if (!(td->options & NAND_BBT_NO_OOB))
+		ver_offs += mtd->writesize;
+	return ver_offs;
 }
 
 /**
  * read_abs_bbts - [GENERIC] Read the bad block table(s) for all chips starting at a given page
- * @mtd:	MTD device structure
- * @buf:	temporary buffer
- * @td:		descriptor for the bad block table
- * @md:		descriptor for the bad block table mirror
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @md:	descriptor for the bad block table mirror
  *
- * Read the bad block table(s) for all chips starting at a given page
- * We assume that the bbt bits are in consecutive order.
- *
-*/
-static int read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
-			 struct nand_bbt_descr *td, struct nand_bbt_descr *md)
+ * Read the bad block table(s) for all chips starting at a given page. We
+ * assume that the bbt bits are in consecutive order.
+ */
+static void read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
+			  struct nand_bbt_descr *td, struct nand_bbt_descr *md)
 {
 	struct nand_chip *this = mtd->priv;
 
 	/* Read the primary version, if available */
 	if (td->options & NAND_BBT_VERSION) {
-		scan_read_raw(mtd, buf, (loff_t)td->pages[0] << this->page_shift,
-			      mtd->writesize);
-		td->version[0] = buf[mtd->writesize + td->veroffs];
-		printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n",
-		       td->pages[0], td->version[0]);
+		scan_read(mtd, buf, (loff_t)td->pages[0] << this->page_shift,
+			      mtd->writesize, td);
+		td->version[0] = buf[bbt_get_ver_offs(mtd, td)];
+		pr_info("Bad block table at page %d, version 0x%02X\n",
+			 td->pages[0], td->version[0]);
 	}
 
 	/* Read the mirror version, if available */
 	if (md && (md->options & NAND_BBT_VERSION)) {
-		scan_read_raw(mtd, buf, (loff_t)md->pages[0] << this->page_shift,
-			      mtd->writesize);
-		md->version[0] = buf[mtd->writesize + md->veroffs];
-		printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n",
-		       md->pages[0], md->version[0]);
+		scan_read(mtd, buf, (loff_t)md->pages[0] << this->page_shift,
+			      mtd->writesize, md);
+		md->version[0] = buf[bbt_get_ver_offs(mtd, md)];
+		pr_info("Bad block table at page %d, version 0x%02X\n",
+			 md->pages[0], md->version[0]);
 	}
-	return 1;
 }
 
-/*
- * Scan a given block full
- */
-static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd,
-			   loff_t offs, uint8_t *buf, size_t readlen,
-			   int scanlen, int len)
-{
-	int ret, j;
-
-	ret = scan_read_raw(mtd, buf, offs, readlen);
-	if (ret)
-		return ret;
-
-	for (j = 0; j < len; j++, buf += scanlen) {
-		if (check_pattern(buf, scanlen, mtd->writesize, bd))
-			return 1;
-	}
-	return 0;
-}
-
-/*
- * Scan a given block partially
- */
+/* Scan a given block partially */
 static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd,
-			   loff_t offs, uint8_t *buf, int len)
+			   loff_t offs, uint8_t *buf, int numpages)
 {
 	struct mtd_oob_ops ops;
 	int j, ret;
@@ -353,16 +423,16 @@ static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd,
 	ops.oobbuf = buf;
 	ops.ooboffs = 0;
 	ops.datbuf = NULL;
-	ops.mode = MTD_OOB_PLACE;
+	ops.mode = MTD_OPS_PLACE_OOB;
 
-	for (j = 0; j < len; j++) {
+	for (j = 0; j < numpages; j++) {
 		/*
-		 * Read the full oob until read_oob is fixed to
-		 * handle single byte reads for 16 bit
-		 * buswidth
+		 * Read the full oob until read_oob is fixed to handle single
+		 * byte reads for 16 bit buswidth.
 		 */
-		ret = mtd->read_oob(mtd, offs, &ops);
-		if (ret)
+		ret = mtd_read_oob(mtd, offs, &ops);
+		/* Ignore ECC errors when checking for BBM */
+		if (ret && !mtd_is_bitflip_or_eccerr(ret))
 			return ret;
 
 		if (check_short_pattern(buf, bd))
@@ -375,86 +445,65 @@ static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd,
 
 /**
  * create_bbt - [GENERIC] Create a bad block table by scanning the device
- * @mtd:	MTD device structure
- * @buf:	temporary buffer
- * @bd:		descriptor for the good/bad block search pattern
- * @chip:	create the table for a specific chip, -1 read all chips.
- *		Applies only if NAND_BBT_PERCHIP option is set
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @bd: descriptor for the good/bad block search pattern
+ * @chip: create the table for a specific chip, -1 read all chips; applies only
+ *        if NAND_BBT_PERCHIP option is set
  *
- * Create a bad block table by scanning the device
- * for the given good/bad block identify pattern
+ * Create a bad block table by scanning the device for the given good/bad block
+ * identify pattern.
  */
 static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
 	struct nand_bbt_descr *bd, int chip)
 {
 	struct nand_chip *this = mtd->priv;
-	int i, numblocks, len, scanlen;
+	int i, numblocks, numpages;
 	int startblock;
 	loff_t from;
-	size_t readlen;
-
-	printk(KERN_INFO "Scanning device for bad blocks\n");
 
-	if (bd->options & NAND_BBT_SCANALLPAGES)
-		len = 1 << (this->bbt_erase_shift - this->page_shift);
-	else {
-		if (bd->options & NAND_BBT_SCAN2NDPAGE)
-			len = 2;
-		else
-			len = 1;
-	}
+	pr_info("Scanning device for bad blocks\n");
 
-	if (!(bd->options & NAND_BBT_SCANEMPTY)) {
-		/* We need only read few bytes from the OOB area */
-		scanlen = 0;
-		readlen = bd->len;
-	} else {
-		/* Full page content should be read */
-		scanlen = mtd->writesize + mtd->oobsize;
-		readlen = len * mtd->writesize;
-	}
+	if (bd->options & NAND_BBT_SCAN2NDPAGE)
+		numpages = 2;
+	else
+		numpages = 1;
 
 	if (chip == -1) {
-		/* Note that numblocks is 2 * (real numblocks) here, see i+=2
-		 * below as it makes shifting and masking less painful */
-		numblocks = mtd->size >> (this->bbt_erase_shift - 1);
+		numblocks = mtd->size >> this->bbt_erase_shift;
 		startblock = 0;
 		from = 0;
 	} else {
 		if (chip >= this->numchips) {
-			printk(KERN_WARNING "create_bbt(): chipnr (%d) > available chips (%d)\n",
+			pr_warn("create_bbt(): chipnr (%d) > available chips (%d)\n",
 			       chip + 1, this->numchips);
 			return -EINVAL;
 		}
-		numblocks = this->chipsize >> (this->bbt_erase_shift - 1);
+		numblocks = this->chipsize >> this->bbt_erase_shift;
 		startblock = chip * numblocks;
 		numblocks += startblock;
-		from = (loff_t)startblock << (this->bbt_erase_shift - 1);
+		from = (loff_t)startblock << this->bbt_erase_shift;
 	}
 
-	if (this->options & NAND_BB_LAST_PAGE)
-		from += mtd->erasesize - (mtd->writesize * len);
+	if (this->bbt_options & NAND_BBT_SCANLASTPAGE)
+		from += mtd->erasesize - (mtd->writesize * numpages);
 
-	for (i = startblock; i < numblocks;) {
+	for (i = startblock; i < numblocks; i++) {
 		int ret;
 
-		if (bd->options & NAND_BBT_SCANALLPAGES)
-			ret = scan_block_full(mtd, bd, from, buf, readlen,
-					      scanlen, len);
-		else
-			ret = scan_block_fast(mtd, bd, from, buf, len);
+		BUG_ON(bd->options & NAND_BBT_NO_OOB);
 
+		ret = scan_block_fast(mtd, bd, from, buf, numpages);
 		if (ret < 0)
 			return ret;
 
 		if (ret) {
-			this->bbt[i >> 3] |= 0x03 << (i & 0x6);
-			printk(KERN_WARNING "Bad eraseblock %d at 0x%012llx\n",
-			       i >> 1, (unsigned long long)from);
+			bbt_mark_entry(this, i, BBT_BLOCK_FACTORY_BAD);
+			pr_warn("Bad eraseblock %d at 0x%012llx\n",
+				i, (unsigned long long)from);
 			mtd->ecc_stats.badblocks++;
 		}
 
-		i += 2;
 		from += (1 << this->bbt_erase_shift);
 	}
 	return 0;
@@ -462,31 +511,29 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
 
 /**
  * search_bbt - [GENERIC] scan the device for a specific bad block table
- * @mtd:	MTD device structure
- * @buf:	temporary buffer
- * @td:		descriptor for the bad block table
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
  *
- * Read the bad block table by searching for a given ident pattern.
- * Search is preformed either from the beginning up or from the end of
- * the device downwards. The search starts always at the start of a
- * block.
- * If the option NAND_BBT_PERCHIP is given, each chip is searched
- * for a bbt, which contains the bad block information of this chip.
- * This is necessary to provide support for certain DOC devices.
+ * Read the bad block table by searching for a given ident pattern. Search is
+ * preformed either from the beginning up or from the end of the device
+ * downwards. The search starts always at the start of a block. If the option
+ * NAND_BBT_PERCHIP is given, each chip is searched for a bbt, which contains
+ * the bad block information of this chip. This is necessary to provide support
+ * for certain DOC devices.
  *
- * The bbt ident pattern resides in the oob area of the first page
- * in a block.
+ * The bbt ident pattern resides in the oob area of the first page in a block.
  */
 static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td)
 {
 	struct nand_chip *this = mtd->priv;
 	int i, chips;
-	int bits, startblock, block, dir;
+	int startblock, block, dir;
 	int scanlen = mtd->writesize + mtd->oobsize;
 	int bbtblocks;
 	int blocktopage = this->bbt_erase_shift - this->page_shift;
 
-	/* Search direction top -> down ? */
+	/* Search direction top -> down? */
 	if (td->options & NAND_BBT_LASTBLOCK) {
 		startblock = (mtd->size >> this->bbt_erase_shift) - 1;
 		dir = -1;
@@ -495,7 +542,7 @@ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
 		dir = 1;
 	}
 
-	/* Do we have a bbt per chip ? */
+	/* Do we have a bbt per chip? */
 	if (td->options & NAND_BBT_PERCHIP) {
 		chips = this->numchips;
 		bbtblocks = this->chipsize >> this->bbt_erase_shift;
@@ -505,9 +552,6 @@ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
 		bbtblocks = mtd->size >> this->bbt_erase_shift;
 	}
 
-	/* Number of bits for each erase block in the bbt */
-	bits = td->options & NAND_BBT_NRBITS_MSK;
-
 	for (i = 0; i < chips; i++) {
 		/* Reset version information */
 		td->version[i] = 0;
@@ -519,11 +563,12 @@ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
 			loff_t offs = (loff_t)actblock << this->bbt_erase_shift;
 
 			/* Read first page */
-			scan_read_raw(mtd, buf, offs, mtd->writesize);
+			scan_read(mtd, buf, offs, mtd->writesize, td);
 			if (!check_pattern(buf, scanlen, mtd->writesize, td)) {
 				td->pages[i] = actblock << blocktopage;
 				if (td->options & NAND_BBT_VERSION) {
-					td->version[i] = buf[mtd->writesize + td->veroffs];
+					offs = bbt_get_ver_offs(mtd, td);
+					td->version[i] = buf[offs];
 				}
 				break;
 			}
@@ -533,24 +578,26 @@ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
 	/* Check, if we found a bbt for each requested chip */
 	for (i = 0; i < chips; i++) {
 		if (td->pages[i] == -1)
-			printk(KERN_WARNING "Bad block table not found for chip %d\n", i);
+			pr_warn("Bad block table not found for chip %d\n", i);
 		else
-			printk(KERN_DEBUG "Bad block table found at page %d, version 0x%02X\n", td->pages[i],
-			       td->version[i]);
+			pr_info("Bad block table found at page %d, version "
+				 "0x%02X\n", td->pages[i], td->version[i]);
 	}
 	return 0;
 }
 
 /**
  * search_read_bbts - [GENERIC] scan the device for bad block table(s)
- * @mtd:	MTD device structure
- * @buf:	temporary buffer
- * @td:		descriptor for the bad block table
- * @md:		descriptor for the bad block table mirror
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @md: descriptor for the bad block table mirror
  *
- * Search and read the bad block table(s)
-*/
-static int search_read_bbts(struct mtd_info *mtd, uint8_t * buf, struct nand_bbt_descr *td, struct nand_bbt_descr *md)
+ * Search and read the bad block table(s).
+ */
+static void search_read_bbts(struct mtd_info *mtd, uint8_t *buf,
+			     struct nand_bbt_descr *td,
+			     struct nand_bbt_descr *md)
 {
 	/* Search the primary table */
 	search_bbt(mtd, buf, td);
@@ -558,32 +605,27 @@ static int search_read_bbts(struct mtd_info *mtd, uint8_t * buf, struct nand_bbt
 	/* Search the mirror table */
 	if (md)
 		search_bbt(mtd, buf, md);
-
-	/* Force result check */
-	return 1;
 }
 
 /**
  * write_bbt - [GENERIC] (Re)write the bad block table
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @md: descriptor for the bad block table mirror
+ * @chipsel: selector for a specific chip, -1 for all
  *
- * @mtd:	MTD device structure
- * @buf:	temporary buffer
- * @td:		descriptor for the bad block table
- * @md:		descriptor for the bad block table mirror
- * @chipsel:	selector for a specific chip, -1 for all
- *
- * (Re)write the bad block table
- *
-*/
+ * (Re)write the bad block table.
+ */
 static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
 		     struct nand_bbt_descr *td, struct nand_bbt_descr *md,
 		     int chipsel)
 {
 	struct nand_chip *this = mtd->priv;
 	struct erase_info einfo;
-	int i, j, res, chip = 0;
+	int i, res, chip = 0;
 	int bits, startblock, dir, page, offs, numblocks, sft, sftmsk;
-	int nrchips, bbtoffs, pageoffs, ooboffs;
+	int nrchips, pageoffs, ooboffs;
 	uint8_t msk[4];
 	uint8_t rcode = td->reserved_block_code;
 	size_t retlen, len = 0;
@@ -593,14 +635,14 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
 	ops.ooblen = mtd->oobsize;
 	ops.ooboffs = 0;
 	ops.datbuf = NULL;
-	ops.mode = MTD_OOB_PLACE;
+	ops.mode = MTD_OPS_PLACE_OOB;
 
 	if (!rcode)
 		rcode = 0xff;
-	/* Write bad block table per chip rather than per device ? */
+	/* Write bad block table per chip rather than per device? */
 	if (td->options & NAND_BBT_PERCHIP) {
 		numblocks = (int)(this->chipsize >> this->bbt_erase_shift);
-		/* Full device write or specific chip ? */
+		/* Full device write or specific chip? */
 		if (chipsel == -1) {
 			nrchips = this->numchips;
 		} else {
@@ -614,8 +656,8 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
 
 	/* Loop through the chips */
 	for (; chip < nrchips; chip++) {
-
-		/* There was already a version of the table, reuse the page
+		/*
+		 * There was already a version of the table, reuse the page
 		 * This applies for absolute placement too, as we have the
 		 * page nr. in td->pages.
 		 */
@@ -624,8 +666,10 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
 			goto write;
 		}
 
-		/* Automatic placement of the bad block table */
-		/* Search direction top -> down ? */
+		/*
+		 * Automatic placement of the bad block table. Search direction
+		 * top -> down?
+		 */
 		if (td->options & NAND_BBT_LASTBLOCK) {
 			startblock = numblocks * (chip + 1) - 1;
 			dir = -1;
@@ -637,10 +681,9 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
 		for (i = 0; i < td->maxblocks; i++) {
 			int block = startblock + dir * i;
 			/* Check, if the block is bad */
-			switch ((this->bbt[block >> 2] >>
-				 (2 * (block & 0x03))) & 0x03) {
-			case 0x01:
-			case 0x03:
+			switch (bbt_get_entry(this, block)) {
+			case BBT_BLOCK_WORN:
+			case BBT_BLOCK_FACTORY_BAD:
 				continue;
 			}
 			page = block <<
@@ -649,7 +692,7 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
 			if (!md || md->pages[chip] != page)
 				goto write;
 		}
-		printk(KERN_ERR "No space left to write bad block table\n");
+		pr_err("No space left to write bad block table\n");
 		return -ENOSPC;
 	write:
 
@@ -672,31 +715,27 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
 		default: return -EINVAL;
 		}
 
-		bbtoffs = chip * (numblocks >> 2);
+		to = ((loff_t)page) << this->page_shift;
 
-		to = ((loff_t) page) << this->page_shift;
-
-		/* Must we save the block contents ? */
+		/* Must we save the block contents? */
 		if (td->options & NAND_BBT_SAVECONTENT) {
 			/* Make it block aligned */
-			to &= ~((loff_t) ((1 << this->bbt_erase_shift) - 1));
+			to &= ~((loff_t)((1 << this->bbt_erase_shift) - 1));
 			len = 1 << this->bbt_erase_shift;
-			res = mtd->read(mtd, to, len, &retlen, buf);
+			res = mtd_read(mtd, to, len, &retlen, buf);
 			if (res < 0) {
 				if (retlen != len) {
-					printk(KERN_INFO "nand_bbt: Error "
-					       "reading block for writing "
-					       "the bad block table\n");
+					pr_info("nand_bbt: error reading block "
+						"for writing the bad block table\n");
 					return res;
 				}
-				printk(KERN_WARNING "nand_bbt: ECC error "
-				       "while reading block for writing "
-				       "bad block table\n");
+				pr_warn("nand_bbt: ECC error while reading "
+					"block for writing bad block table\n");
 			}
 			/* Read oob data */
 			ops.ooblen = (len >> this->page_shift) * mtd->oobsize;
 			ops.oobbuf = &buf[len];
-			res = mtd->read_oob(mtd, to + mtd->writesize, &ops);
+			res = mtd_read_oob(mtd, to + mtd->writesize, &ops);
 			if (res < 0 || ops.oobretlen != ops.ooblen)
 				goto outerr;
 
@@ -704,15 +743,29 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
 			pageoffs = page - (int)(to >> this->page_shift);
 			offs = pageoffs << this->page_shift;
 			/* Preset the bbt area with 0xff */
-			memset(&buf[offs], 0xff, (size_t) (numblocks >> sft));
+			memset(&buf[offs], 0xff, (size_t)(numblocks >> sft));
 			ooboffs = len + (pageoffs * mtd->oobsize);
 
+		} else if (td->options & NAND_BBT_NO_OOB) {
+			ooboffs = 0;
+			offs = td->len;
+			/* The version byte */
+			if (td->options & NAND_BBT_VERSION)
+				offs++;
+			/* Calc length */
+			len = (size_t)(numblocks >> sft);
+			len += offs;
+			/* Make it page aligned! */
+			len = ALIGN(len, mtd->writesize);
+			/* Preset the buffer with 0xff */
+			memset(buf, 0xff, len);
+			/* Pattern is located at the begin of first page */
+			memcpy(buf, td->pattern, td->len);
 		} else {
 			/* Calc length */
-			len = (size_t) (numblocks >> sft);
-			/* Make it page aligned ! */
-			len = (len + (mtd->writesize - 1)) &
-				~(mtd->writesize - 1);
+			len = (size_t)(numblocks >> sft);
+			/* Make it page aligned! */
+			len = ALIGN(len, mtd->writesize);
 			/* Preset the buffer with 0xff */
 			memset(buf, 0xff, len +
 			       (len >> this->page_shift)* mtd->oobsize);
@@ -725,17 +778,13 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
 		if (td->options & NAND_BBT_VERSION)
 			buf[ooboffs + td->veroffs] = td->version[chip];
 
-		/* walk through the memory table */
-		for (i = 0; i < numblocks;) {
+		/* Walk through the memory table */
+		for (i = 0; i < numblocks; i++) {
 			uint8_t dat;
-			dat = this->bbt[bbtoffs + (i >> 2)];
-			for (j = 0; j < 4; j++, i++) {
-				int sftcnt = (i << (3 - sft)) & sftmsk;
-				/* Do not store the reserved bbt blocks ! */
-				buf[offs + (i >> sft)] &=
-					~(msk[dat & 0x03] << sftcnt);
-				dat >>= 2;
-			}
+			int sftcnt = (i << (3 - sft)) & sftmsk;
+			dat = bbt_get_entry(this, chip * numblocks + i);
+			/* Do not store the reserved bbt blocks! */
+			buf[offs + (i >> sft)] &= ~(msk[dat] << sftcnt);
 		}
 
 		memset(&einfo, 0, sizeof(einfo));
@@ -746,12 +795,14 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
 		if (res < 0)
 			goto outerr;
 
-		res = scan_write_bbt(mtd, to, len, buf, &buf[len]);
+		res = scan_write_bbt(mtd, to, len, buf,
+				td->options & NAND_BBT_NO_OOB ? NULL :
+				&buf[len]);
 		if (res < 0)
 			goto outerr;
 
-		printk(KERN_DEBUG "Bad block table written to 0x%012llx, version "
-		       "0x%02X\n", (unsigned long long)to, td->version[chip]);
+		pr_info("Bad block table written to 0x%012llx, version 0x%02X\n",
+			 (unsigned long long)to, td->version[chip]);
 
 		/* Mark it as used */
 		td->pages[chip] = page;
@@ -759,48 +810,45 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
 	return 0;
 
  outerr:
-	printk(KERN_WARNING
-	       "nand_bbt: Error while writing bad block table %d\n", res);
+	pr_warn("nand_bbt: error while writing bad block table %d\n", res);
 	return res;
 }
 
 /**
  * nand_memory_bbt - [GENERIC] create a memory based bad block table
- * @mtd:	MTD device structure
- * @bd:		descriptor for the good/bad block search pattern
+ * @mtd: MTD device structure
+ * @bd: descriptor for the good/bad block search pattern
  *
- * The function creates a memory based bbt by scanning the device
- * for manufacturer / software marked good / bad blocks
-*/
+ * The function creates a memory based bbt by scanning the device for
+ * manufacturer / software marked good / bad blocks.
+ */
 static inline int nand_memory_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
 {
 	struct nand_chip *this = mtd->priv;
 
-	bd->options &= ~NAND_BBT_SCANEMPTY;
 	return create_bbt(mtd, this->buffers->databuf, bd, -1);
 }
 
 /**
  * check_create - [GENERIC] create and write bbt(s) if necessary
- * @mtd:	MTD device structure
- * @buf:	temporary buffer
- * @bd:		descriptor for the good/bad block search pattern
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @bd: descriptor for the good/bad block search pattern
  *
- * The function checks the results of the previous call to read_bbt
- * and creates / updates the bbt(s) if necessary
- * Creation is necessary if no bbt was found for the chip/device
- * Update is necessary if one of the tables is missing or the
- * version nr. of one table is less than the other
-*/
+ * The function checks the results of the previous call to read_bbt and creates
+ * / updates the bbt(s) if necessary. Creation is necessary if no bbt was found
+ * for the chip/device. Update is necessary if one of the tables is missing or
+ * the version nr. of one table is less than the other.
+ */
 static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd)
 {
-	int i, chips, writeops, chipsel, res;
+	int i, chips, writeops, create, chipsel, res, res2;
 	struct nand_chip *this = mtd->priv;
 	struct nand_bbt_descr *td = this->bbt_td;
 	struct nand_bbt_descr *md = this->bbt_md;
 	struct nand_bbt_descr *rd, *rd2;
 
-	/* Do we have a bbt per chip ? */
+	/* Do we have a bbt per chip? */
 	if (td->options & NAND_BBT_PERCHIP)
 		chips = this->numchips;
 	else
@@ -808,85 +856,98 @@ static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc
 
 	for (i = 0; i < chips; i++) {
 		writeops = 0;
+		create = 0;
 		rd = NULL;
 		rd2 = NULL;
-		/* Per chip or per device ? */
+		res = res2 = 0;
+		/* Per chip or per device? */
 		chipsel = (td->options & NAND_BBT_PERCHIP) ? i : -1;
-		/* Mirrored table avilable ? */
+		/* Mirrored table available? */
 		if (md) {
 			if (td->pages[i] == -1 && md->pages[i] == -1) {
+				create = 1;
 				writeops = 0x03;
-				goto create;
-			}
-
-			if (td->pages[i] == -1) {
+			} else if (td->pages[i] == -1) {
 				rd = md;
-				td->version[i] = md->version[i];
-				writeops = 1;
-				goto writecheck;
-			}
-
-			if (md->pages[i] == -1) {
+				writeops = 0x01;
+			} else if (md->pages[i] == -1) {
 				rd = td;
-				md->version[i] = td->version[i];
-				writeops = 2;
-				goto writecheck;
-			}
-
-			if (td->version[i] == md->version[i]) {
+				writeops = 0x02;
+			} else if (td->version[i] == md->version[i]) {
 				rd = td;
 				if (!(td->options & NAND_BBT_VERSION))
 					rd2 = md;
-				goto writecheck;
-			}
-
-			if (((int8_t) (td->version[i] - md->version[i])) > 0) {
+			} else if (((int8_t)(td->version[i] - md->version[i])) > 0) {
 				rd = td;
-				md->version[i] = td->version[i];
-				writeops = 2;
+				writeops = 0x02;
 			} else {
 				rd = md;
-				td->version[i] = md->version[i];
-				writeops = 1;
+				writeops = 0x01;
 			}
-
-			goto writecheck;
-
 		} else {
 			if (td->pages[i] == -1) {
+				create = 1;
 				writeops = 0x01;
-				goto create;
+			} else {
+				rd = td;
 			}
-			rd = td;
-			goto writecheck;
 		}
-	create:
-		/* Create the bad block table by scanning the device ? */
-		if (!(td->options & NAND_BBT_CREATE))
-			continue;
 
-		/* Create the table in memory by scanning the chip(s) */
-		create_bbt(mtd, buf, bd, chipsel);
-
-		td->version[i] = 1;
-		if (md)
-			md->version[i] = 1;
-	writecheck:
-		/* read back first ? */
-		if (rd)
-			read_abs_bbt(mtd, buf, rd, chipsel);
-		/* If they weren't versioned, read both. */
-		if (rd2)
-			read_abs_bbt(mtd, buf, rd2, chipsel);
-
-		/* Write the bad block table to the device ? */
+		if (create) {
+			/* Create the bad block table by scanning the device? */
+			if (!(td->options & NAND_BBT_CREATE))
+				continue;
+
+			/* Create the table in memory by scanning the chip(s) */
+			if (!(this->bbt_options & NAND_BBT_CREATE_EMPTY))
+				create_bbt(mtd, buf, bd, chipsel);
+
+			td->version[i] = 1;
+			if (md)
+				md->version[i] = 1;
+		}
+
+		/* Read back first? */
+		if (rd) {
+			res = read_abs_bbt(mtd, buf, rd, chipsel);
+			if (mtd_is_eccerr(res)) {
+				/* Mark table as invalid */
+				rd->pages[i] = -1;
+				rd->version[i] = 0;
+				i--;
+				continue;
+			}
+		}
+		/* If they weren't versioned, read both */
+		if (rd2) {
+			res2 = read_abs_bbt(mtd, buf, rd2, chipsel);
+			if (mtd_is_eccerr(res2)) {
+				/* Mark table as invalid */
+				rd2->pages[i] = -1;
+				rd2->version[i] = 0;
+				i--;
+				continue;
+			}
+		}
+
+		/* Scrub the flash table(s)? */
+		if (mtd_is_bitflip(res) || mtd_is_bitflip(res2))
+			writeops = 0x03;
+
+		/* Update version numbers before writing */
+		if (md) {
+			td->version[i] = max(td->version[i], md->version[i]);
+			md->version[i] = td->version[i];
+		}
+
+		/* Write the bad block table to the device? */
 		if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
 			res = write_bbt(mtd, buf, td, md, chipsel);
 			if (res < 0)
 				return res;
 		}
 
-		/* Write the mirror bad block table to the device ? */
+		/* Write the mirror bad block table to the device? */
 		if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
 			res = write_bbt(mtd, buf, md, td, chipsel);
 			if (res < 0)
@@ -898,20 +959,19 @@ static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc
 
 /**
  * mark_bbt_regions - [GENERIC] mark the bad block table regions
- * @mtd:	MTD device structure
- * @td:		bad block table descriptor
+ * @mtd: MTD device structure
+ * @td: bad block table descriptor
  *
- * The bad block table regions are marked as "bad" to prevent
- * accidental erasures / writes. The regions are identified by
- * the mark 0x02.
-*/
+ * The bad block table regions are marked as "bad" to prevent accidental
+ * erasures / writes. The regions are identified by the mark 0x02.
+ */
 static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
 {
 	struct nand_chip *this = mtd->priv;
 	int i, j, chips, block, nrblocks, update;
-	uint8_t oldval, newval;
+	uint8_t oldval;
 
-	/* Do we have a bbt per chip ? */
+	/* Do we have a bbt per chip? */
 	if (td->options & NAND_BBT_PERCHIP) {
 		chips = this->numchips;
 		nrblocks = (int)(this->chipsize >> this->bbt_erase_shift);
@@ -926,12 +986,12 @@ static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
 			if (td->pages[i] == -1)
 				continue;
 			block = td->pages[i] >> (this->bbt_erase_shift - this->page_shift);
-			block <<= 1;
-			oldval = this->bbt[(block >> 3)];
-			newval = oldval | (0x2 << (block & 0x06));
-			this->bbt[(block >> 3)] = newval;
-			if ((oldval != newval) && td->reserved_block_code)
-				nand_update_bbt(mtd, (loff_t)block << (this->bbt_erase_shift - 1));
+			oldval = bbt_get_entry(this, block);
+			bbt_mark_entry(this, block, BBT_BLOCK_RESERVED);
+			if ((oldval != BBT_BLOCK_RESERVED) &&
+					td->reserved_block_code)
+				nand_update_bbt(mtd, (loff_t)block <<
+						this->bbt_erase_shift);
 			continue;
 		}
 		update = 0;
@@ -939,37 +999,84 @@ static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
 			block = ((i + 1) * nrblocks) - td->maxblocks;
 		else
 			block = i * nrblocks;
-		block <<= 1;
 		for (j = 0; j < td->maxblocks; j++) {
-			oldval = this->bbt[(block >> 3)];
-			newval = oldval | (0x2 << (block & 0x06));
-			this->bbt[(block >> 3)] = newval;
-			if (oldval != newval)
+			oldval = bbt_get_entry(this, block);
+			bbt_mark_entry(this, block, BBT_BLOCK_RESERVED);
+			if (oldval != BBT_BLOCK_RESERVED)
 				update = 1;
-			block += 2;
+			block++;
 		}
-		/* If we want reserved blocks to be recorded to flash, and some
-		   new ones have been marked, then we need to update the stored
-		   bbts.  This should only happen once. */
+		/*
+		 * If we want reserved blocks to be recorded to flash, and some
+		 * new ones have been marked, then we need to update the stored
+		 * bbts.  This should only happen once.
+		 */
 		if (update && td->reserved_block_code)
-			nand_update_bbt(mtd, (loff_t)(block - 2) << (this->bbt_erase_shift - 1));
+			nand_update_bbt(mtd, (loff_t)(block - 1) <<
+					this->bbt_erase_shift);
 	}
 }
 
 /**
- * nand_scan_bbt - [NAND Interface] scan, find, read and maybe create bad block table(s)
- * @mtd:	MTD device structure
- * @bd:		descriptor for the good/bad block search pattern
+ * verify_bbt_descr - verify the bad block description
+ * @mtd: MTD device structure
+ * @bd: the table to verify
  *
- * The function checks, if a bad block table(s) is/are already
- * available. If not it scans the device for manufacturer
- * marked good / bad blocks and writes the bad block table(s) to
- * the selected place.
+ * This functions performs a few sanity checks on the bad block description
+ * table.
+ */
+static void verify_bbt_descr(struct mtd_info *mtd, struct nand_bbt_descr *bd)
+{
+	struct nand_chip *this = mtd->priv;
+	u32 pattern_len;
+	u32 bits;
+	u32 table_size;
+
+	if (!bd)
+		return;
+
+	pattern_len = bd->len;
+	bits = bd->options & NAND_BBT_NRBITS_MSK;
+
+	BUG_ON((this->bbt_options & NAND_BBT_NO_OOB) &&
+			!(this->bbt_options & NAND_BBT_USE_FLASH));
+	BUG_ON(!bits);
+
+	if (bd->options & NAND_BBT_VERSION)
+		pattern_len++;
+
+	if (bd->options & NAND_BBT_NO_OOB) {
+		BUG_ON(!(this->bbt_options & NAND_BBT_USE_FLASH));
+		BUG_ON(!(this->bbt_options & NAND_BBT_NO_OOB));
+		BUG_ON(bd->offs);
+		if (bd->options & NAND_BBT_VERSION)
+			BUG_ON(bd->veroffs != bd->len);
+		BUG_ON(bd->options & NAND_BBT_SAVECONTENT);
+	}
+
+	if (bd->options & NAND_BBT_PERCHIP)
+		table_size = this->chipsize >> this->bbt_erase_shift;
+	else
+		table_size = mtd->size >> this->bbt_erase_shift;
+	table_size >>= 3;
+	table_size *= bits;
+	if (bd->options & NAND_BBT_NO_OOB)
+		table_size += pattern_len;
+	BUG_ON(table_size > (1 << this->bbt_erase_shift));
+}
+
+/**
+ * nand_scan_bbt - [NAND Interface] scan, find, read and maybe create bad block table(s)
+ * @mtd: MTD device structure
+ * @bd: descriptor for the good/bad block search pattern
  *
- * The bad block table memory is allocated here. It must be freed
- * by calling the nand_free_bbt function.
+ * The function checks, if a bad block table(s) is/are already available. If
+ * not it scans the device for manufacturer marked good / bad blocks and writes
+ * the bad block table(s) to the selected place.
  *
-*/
+ * The bad block table memory is allocated here. It must be freed by calling
+ * the nand_free_bbt function.
+ */
 int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
 {
 	struct nand_chip *this = mtd->priv;
@@ -979,46 +1086,48 @@ int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
 	struct nand_bbt_descr *md = this->bbt_md;
 
 	len = mtd->size >> (this->bbt_erase_shift + 2);
-	/* Allocate memory (2bit per block) and clear the memory bad block table */
+	/*
+	 * Allocate memory (2bit per block) and clear the memory bad block
+	 * table.
+	 */
 	this->bbt = kzalloc(len, GFP_KERNEL);
-	if (!this->bbt) {
-		printk(KERN_ERR "nand_scan_bbt: Out of memory\n");
+	if (!this->bbt)
 		return -ENOMEM;
-	}
 
-	/* If no primary table decriptor is given, scan the device
-	 * to build a memory based bad block table
+	/*
+	 * If no primary table decriptor is given, scan the device to build a
+	 * memory based bad block table.
 	 */
 	if (!td) {
 		if ((res = nand_memory_bbt(mtd, bd))) {
-			printk(KERN_ERR "nand_bbt: Can't scan flash and build the RAM-based BBT\n");
+			pr_err("nand_bbt: can't scan flash and build the RAM-based BBT\n");
 			kfree(this->bbt);
 			this->bbt = NULL;
 		}
 		return res;
 	}
+	verify_bbt_descr(mtd, td);
+	verify_bbt_descr(mtd, md);
 
 	/* Allocate a temporary buffer for one eraseblock incl. oob */
 	len = (1 << this->bbt_erase_shift);
 	len += (len >> this->page_shift) * mtd->oobsize;
 	buf = vmalloc(len);
 	if (!buf) {
-		printk(KERN_ERR "nand_bbt: Out of memory\n");
 		kfree(this->bbt);
 		this->bbt = NULL;
 		return -ENOMEM;
 	}
 
-	/* Is the bbt at a given page ? */
+	/* Is the bbt at a given page? */
 	if (td->options & NAND_BBT_ABSPAGE) {
-		res = read_abs_bbts(mtd, buf, td, md);
+		read_abs_bbts(mtd, buf, td, md);
 	} else {
 		/* Search the bad block table using a pattern in oob */
-		res = search_read_bbts(mtd, buf, td, md);
+		search_read_bbts(mtd, buf, td, md);
 	}
 
-	if (res)
-		res = check_create(mtd, buf, bd);
+	res = check_create(mtd, buf, bd);
 
 	/* Prevent the bbt regions from erasing / writing */
 	mark_bbt_region(mtd, td);
@@ -1030,16 +1139,16 @@ int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
 }
 
 /**
- * nand_update_bbt - [NAND Interface] update bad block table(s)
- * @mtd:	MTD device structure
- * @offs:	the offset of the newly marked block
+ * nand_update_bbt - update bad block table(s)
+ * @mtd: MTD device structure
+ * @offs: the offset of the newly marked block
  *
- * The function updates the bad block table(s)
-*/
-int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
+ * The function updates the bad block table(s).
+ */
+static int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
 {
 	struct nand_chip *this = mtd->priv;
-	int len, res = 0, writeops = 0;
+	int len, res = 0;
 	int chip, chipsel;
 	uint8_t *buf;
 	struct nand_bbt_descr *td = this->bbt_td;
@@ -1052,14 +1161,10 @@ int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
 	len = (1 << this->bbt_erase_shift);
 	len += (len >> this->page_shift) * mtd->oobsize;
 	buf = kmalloc(len, GFP_KERNEL);
-	if (!buf) {
-		printk(KERN_ERR "nand_update_bbt: Out of memory\n");
+	if (!buf)
 		return -ENOMEM;
-	}
 
-	writeops = md != NULL ? 0x03 : 0x01;
-
-	/* Do we have a bbt per chip ? */
+	/* Do we have a bbt per chip? */
 	if (td->options & NAND_BBT_PERCHIP) {
 		chip = (int)(offs >> this->chip_shift);
 		chipsel = chip;
@@ -1072,14 +1177,14 @@ int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
 	if (md)
 		md->version[chip]++;
 
-	/* Write the bad block table to the device ? */
-	if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
+	/* Write the bad block table to the device? */
+	if (td->options & NAND_BBT_WRITE) {
 		res = write_bbt(mtd, buf, td, md, chipsel);
 		if (res < 0)
 			goto out;
 	}
-	/* Write the mirror bad block table to the device ? */
-	if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
+	/* Write the mirror bad block table to the device? */
+	if (md && (md->options & NAND_BBT_WRITE)) {
 		res = write_bbt(mtd, buf, md, td, chipsel);
 	}
 
@@ -1088,49 +1193,13 @@ int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
 	return res;
 }
 
-/* Define some generic bad / good block scan pattern which are used
- * while scanning a device for factory marked good / bad blocks. */
+/*
+ * Define some generic bad / good block scan pattern which are used
+ * while scanning a device for factory marked good / bad blocks.
+ */
 static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
 
-static struct nand_bbt_descr smallpage_memorybased = {
-	.options = NAND_BBT_SCAN2NDPAGE,
-	.offs = 5,
-	.len = 1,
-	.pattern = scan_ff_pattern
-};
-
-static struct nand_bbt_descr largepage_memorybased = {
-	.options = 0,
-	.offs = 0,
-	.len = 2,
-	.pattern = scan_ff_pattern
-};
-
-static struct nand_bbt_descr smallpage_flashbased = {
-	.options = NAND_BBT_SCAN2NDPAGE,
-	.offs = 5,
-	.len = 1,
-	.pattern = scan_ff_pattern
-};
-
-static struct nand_bbt_descr largepage_flashbased = {
-	.options = NAND_BBT_SCAN2NDPAGE,
-	.offs = 0,
-	.len = 2,
-	.pattern = scan_ff_pattern
-};
-
-static uint8_t scan_agand_pattern[] = { 0x1C, 0x71, 0xC7, 0x1C, 0x71, 0xC7 };
-
-static struct nand_bbt_descr agand_flashbased = {
-	.options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES,
-	.offs = 0x20,
-	.len = 6,
-	.pattern = scan_agand_pattern
-};
-
-/* Generic flash bbt decriptors
-*/
+/* Generic flash bbt descriptors */
 static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
 static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' };
 
@@ -1140,7 +1209,7 @@ static struct nand_bbt_descr bbt_main_descr = {
 	.offs =	8,
 	.len = 4,
 	.veroffs = 12,
-	.maxblocks = 4,
+	.maxblocks = NAND_BBT_SCAN_MAXBLOCKS,
 	.pattern = bbt_pattern
 };
 
@@ -1150,90 +1219,146 @@ static struct nand_bbt_descr bbt_mirror_descr = {
 	.offs =	8,
 	.len = 4,
 	.veroffs = 12,
-	.maxblocks = 4,
+	.maxblocks = NAND_BBT_SCAN_MAXBLOCKS,
 	.pattern = mirror_pattern
 };
 
+static struct nand_bbt_descr bbt_main_no_oob_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+		| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP
+		| NAND_BBT_NO_OOB,
+	.len = 4,
+	.veroffs = 4,
+	.maxblocks = NAND_BBT_SCAN_MAXBLOCKS,
+	.pattern = bbt_pattern
+};
+
+static struct nand_bbt_descr bbt_mirror_no_oob_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+		| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP
+		| NAND_BBT_NO_OOB,
+	.len = 4,
+	.veroffs = 4,
+	.maxblocks = NAND_BBT_SCAN_MAXBLOCKS,
+	.pattern = mirror_pattern
+};
+
+#define BADBLOCK_SCAN_MASK (~NAND_BBT_NO_OOB)
 /**
- * nand_default_bbt - [NAND Interface] Select a default bad block table for the device
- * @mtd:	MTD device structure
+ * nand_create_badblock_pattern - [INTERN] Creates a BBT descriptor structure
+ * @this: NAND chip to create descriptor for
  *
- * This function selects the default bad block table
- * support for the device and calls the nand_scan_bbt function
+ * This function allocates and initializes a nand_bbt_descr for BBM detection
+ * based on the properties of @this. The new descriptor is stored in
+ * this->badblock_pattern. Thus, this->badblock_pattern should be NULL when
+ * passed to this function.
+ */
+static int nand_create_badblock_pattern(struct nand_chip *this)
+{
+	struct nand_bbt_descr *bd;
+	if (this->badblock_pattern) {
+		pr_warn("Bad block pattern already allocated; not replacing\n");
+		return -EINVAL;
+	}
+	bd = kzalloc(sizeof(*bd), GFP_KERNEL);
+	if (!bd)
+		return -ENOMEM;
+	bd->options = this->bbt_options & BADBLOCK_SCAN_MASK;
+	bd->offs = this->badblockpos;
+	bd->len = (this->options & NAND_BUSWIDTH_16) ? 2 : 1;
+	bd->pattern = scan_ff_pattern;
+	bd->options |= NAND_BBT_DYNAMICSTRUCT;
+	this->badblock_pattern = bd;
+	return 0;
+}
+
+/**
+ * nand_default_bbt - [NAND Interface] Select a default bad block table for the device
+ * @mtd: MTD device structure
  *
-*/
+ * This function selects the default bad block table support for the device and
+ * calls the nand_scan_bbt function.
+ */
 int nand_default_bbt(struct mtd_info *mtd)
 {
 	struct nand_chip *this = mtd->priv;
+	int ret;
 
-	/* Default for AG-AND. We must use a flash based
-	 * bad block table as the devices have factory marked
-	 * _good_ blocks. Erasing those blocks leads to loss
-	 * of the good / bad information, so we _must_ store
-	 * this information in a good / bad table during
-	 * startup
-	 */
-	if (this->options & NAND_IS_AND) {
+	/* Is a flash based bad block table requested? */
+	if (this->bbt_options & NAND_BBT_USE_FLASH) {
 		/* Use the default pattern descriptors */
 		if (!this->bbt_td) {
-			this->bbt_td = &bbt_main_descr;
-			this->bbt_md = &bbt_mirror_descr;
-		}
-		this->options |= NAND_USE_FLASH_BBT;
-		return nand_scan_bbt(mtd, &agand_flashbased);
-	}
-
-	/* Is a flash based bad block table requested ? */
-	if (this->options & NAND_USE_FLASH_BBT) {
-		/* Use the default pattern descriptors */
-		if (!this->bbt_td) {
-			this->bbt_td = &bbt_main_descr;
-			this->bbt_md = &bbt_mirror_descr;
-		}
-		if (!this->badblock_pattern) {
-			this->badblock_pattern = (mtd->writesize > 512) ? &largepage_flashbased : &smallpage_flashbased;
+			if (this->bbt_options & NAND_BBT_NO_OOB) {
+				this->bbt_td = &bbt_main_no_oob_descr;
+				this->bbt_md = &bbt_mirror_no_oob_descr;
+			} else {
+				this->bbt_td = &bbt_main_descr;
+				this->bbt_md = &bbt_mirror_descr;
+			}
 		}
 	} else {
 		this->bbt_td = NULL;
 		this->bbt_md = NULL;
-		if (!this->badblock_pattern) {
-			this->badblock_pattern = (mtd->writesize > 512) ?
-			    &largepage_memorybased : &smallpage_memorybased;
-		}
 	}
+
+	if (!this->badblock_pattern) {
+		ret = nand_create_badblock_pattern(this);
+		if (ret)
+			return ret;
+	}
+
 	return nand_scan_bbt(mtd, this->badblock_pattern);
 }
 
 /**
  * nand_isbad_bbt - [NAND Interface] Check if a block is bad
- * @mtd:	MTD device structure
- * @offs:	offset in the device
- * @allowbbt:	allow access to bad block table region
- *
-*/
+ * @mtd: MTD device structure
+ * @offs: offset in the device
+ * @allowbbt: allow access to bad block table region
+ */
 int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
 {
 	struct nand_chip *this = mtd->priv;
-	int block;
-	uint8_t res;
+	int block, res;
 
-	/* Get block number * 2 */
-	block = (int)(offs >> (this->bbt_erase_shift - 1));
-	res = (this->bbt[block >> 3] >> (block & 0x06)) & 0x03;
+	block = (int)(offs >> this->bbt_erase_shift);
+	res = bbt_get_entry(this, block);
 
-	DEBUG(MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n",
-	      (unsigned int)offs, block >> 1, res);
+	pr_debug("nand_isbad_bbt(): bbt info for offs 0x%08x: "
+			"(block %d) 0x%02x\n",
+			(unsigned int)offs, block, res);
 
-	switch ((int)res) {
-	case 0x00:
+	switch (res) {
+	case BBT_BLOCK_GOOD:
 		return 0;
-	case 0x01:
+	case BBT_BLOCK_WORN:
 		return 1;
-	case 0x02:
+	case BBT_BLOCK_RESERVED:
 		return allowbbt ? 0 : 1;
 	}
 	return 1;
 }
 
+/**
+ * nand_markbad_bbt - [NAND Interface] Mark a block bad in the BBT
+ * @mtd: MTD device structure
+ * @offs: offset of the bad block
+ */
+int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs)
+{
+	struct nand_chip *this = mtd->priv;
+	int block, ret = 0;
+
+	block = (int)(offs >> this->bbt_erase_shift);
+
+	/* Mark bad block in memory */
+	bbt_mark_entry(this, block, BBT_BLOCK_WORN);
+
+	/* Update flash-based bad block table */
+	if (this->bbt_options & NAND_BBT_USE_FLASH)
+		ret = nand_update_bbt(mtd, offs);
+
+	return ret;
+}
+
 EXPORT_SYMBOL(nand_scan_bbt);
-EXPORT_SYMBOL(nand_default_bbt);
diff --git a/drivers/mtd/nand/nand_bch.c b/drivers/mtd/nand/nand_bch.c
new file mode 100644
index 00000000000..3803e0bba23
--- /dev/null
+++ b/drivers/mtd/nand/nand_bch.c
@@ -0,0 +1,243 @@
+/*
+ * This file provides ECC correction for more than 1 bit per block of data,
+ * using binary BCH codes. It relies on the generic BCH library lib/bch.c.
+ *
+ * Copyright © 2011 Ivan Djelic <ivan.djelic@parrot.com>
+ *
+ * This file is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 or (at your option) any
+ * later version.
+ *
+ * This file is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this file; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/bitops.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_bch.h>
+#include <linux/bch.h>
+
+/**
+ * struct nand_bch_control - private NAND BCH control structure
+ * @bch:       BCH control structure
+ * @ecclayout: private ecc layout for this BCH configuration
+ * @errloc:    error location array
+ * @eccmask:   XOR ecc mask, allows erased pages to be decoded as valid
+ */
+struct nand_bch_control {
+	struct bch_control   *bch;
+	struct nand_ecclayout ecclayout;
+	unsigned int         *errloc;
+	unsigned char        *eccmask;
+};
+
+/**
+ * nand_bch_calculate_ecc - [NAND Interface] Calculate ECC for data block
+ * @mtd:	MTD block structure
+ * @buf:	input buffer with raw data
+ * @code:	output buffer with ECC
+ */
+int nand_bch_calculate_ecc(struct mtd_info *mtd, const unsigned char *buf,
+			   unsigned char *code)
+{
+	const struct nand_chip *chip = mtd->priv;
+	struct nand_bch_control *nbc = chip->ecc.priv;
+	unsigned int i;
+
+	memset(code, 0, chip->ecc.bytes);
+	encode_bch(nbc->bch, buf, chip->ecc.size, code);
+
+	/* apply mask so that an erased page is a valid codeword */
+	for (i = 0; i < chip->ecc.bytes; i++)
+		code[i] ^= nbc->eccmask[i];
+
+	return 0;
+}
+EXPORT_SYMBOL(nand_bch_calculate_ecc);
+
+/**
+ * nand_bch_correct_data - [NAND Interface] Detect and correct bit error(s)
+ * @mtd:	MTD block structure
+ * @buf:	raw data read from the chip
+ * @read_ecc:	ECC from the chip
+ * @calc_ecc:	the ECC calculated from raw data
+ *
+ * Detect and correct bit errors for a data byte block
+ */
+int nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf,
+			  unsigned char *read_ecc, unsigned char *calc_ecc)
+{
+	const struct nand_chip *chip = mtd->priv;
+	struct nand_bch_control *nbc = chip->ecc.priv;
+	unsigned int *errloc = nbc->errloc;
+	int i, count;
+
+	count = decode_bch(nbc->bch, NULL, chip->ecc.size, read_ecc, calc_ecc,
+			   NULL, errloc);
+	if (count > 0) {
+		for (i = 0; i < count; i++) {
+			if (errloc[i] < (chip->ecc.size*8))
+				/* error is located in data, correct it */
+				buf[errloc[i] >> 3] ^= (1 << (errloc[i] & 7));
+			/* else error in ecc, no action needed */
+
+			pr_debug("%s: corrected bitflip %u\n", __func__,
+					errloc[i]);
+		}
+	} else if (count < 0) {
+		printk(KERN_ERR "ecc unrecoverable error\n");
+		count = -1;
+	}
+	return count;
+}
+EXPORT_SYMBOL(nand_bch_correct_data);
+
+/**
+ * nand_bch_init - [NAND Interface] Initialize NAND BCH error correction
+ * @mtd:	MTD block structure
+ * @eccsize:	ecc block size in bytes
+ * @eccbytes:	ecc length in bytes
+ * @ecclayout:	output default layout
+ *
+ * Returns:
+ *  a pointer to a new NAND BCH control structure, or NULL upon failure
+ *
+ * Initialize NAND BCH error correction. Parameters @eccsize and @eccbytes
+ * are used to compute BCH parameters m (Galois field order) and t (error
+ * correction capability). @eccbytes should be equal to the number of bytes
+ * required to store m*t bits, where m is such that 2^m-1 > @eccsize*8.
+ *
+ * Example: to configure 4 bit correction per 512 bytes, you should pass
+ * @eccsize = 512  (thus, m=13 is the smallest integer such that 2^m-1 > 512*8)
+ * @eccbytes = 7   (7 bytes are required to store m*t = 13*4 = 52 bits)
+ */
+struct nand_bch_control *
+nand_bch_init(struct mtd_info *mtd, unsigned int eccsize, unsigned int eccbytes,
+	      struct nand_ecclayout **ecclayout)
+{
+	unsigned int m, t, eccsteps, i;
+	struct nand_ecclayout *layout;
+	struct nand_bch_control *nbc = NULL;
+	unsigned char *erased_page;
+
+	if (!eccsize || !eccbytes) {
+		printk(KERN_WARNING "ecc parameters not supplied\n");
+		goto fail;
+	}
+
+	m = fls(1+8*eccsize);
+	t = (eccbytes*8)/m;
+
+	nbc = kzalloc(sizeof(*nbc), GFP_KERNEL);
+	if (!nbc)
+		goto fail;
+
+	nbc->bch = init_bch(m, t, 0);
+	if (!nbc->bch)
+		goto fail;
+
+	/* verify that eccbytes has the expected value */
+	if (nbc->bch->ecc_bytes != eccbytes) {
+		printk(KERN_WARNING "invalid eccbytes %u, should be %u\n",
+		       eccbytes, nbc->bch->ecc_bytes);
+		goto fail;
+	}
+
+	eccsteps = mtd->writesize/eccsize;
+
+	/* if no ecc placement scheme was provided, build one */
+	if (!*ecclayout) {
+
+		/* handle large page devices only */
+		if (mtd->oobsize < 64) {
+			printk(KERN_WARNING "must provide an oob scheme for "
+			       "oobsize %d\n", mtd->oobsize);
+			goto fail;
+		}
+
+		layout = &nbc->ecclayout;
+		layout->eccbytes = eccsteps*eccbytes;
+
+		/* reserve 2 bytes for bad block marker */
+		if (layout->eccbytes+2 > mtd->oobsize) {
+			printk(KERN_WARNING "no suitable oob scheme available "
+			       "for oobsize %d eccbytes %u\n", mtd->oobsize,
+			       eccbytes);
+			goto fail;
+		}
+		/* put ecc bytes at oob tail */
+		for (i = 0; i < layout->eccbytes; i++)
+			layout->eccpos[i] = mtd->oobsize-layout->eccbytes+i;
+
+		layout->oobfree[0].offset = 2;
+		layout->oobfree[0].length = mtd->oobsize-2-layout->eccbytes;
+
+		*ecclayout = layout;
+	}
+
+	/* sanity checks */
+	if (8*(eccsize+eccbytes) >= (1 << m)) {
+		printk(KERN_WARNING "eccsize %u is too large\n", eccsize);
+		goto fail;
+	}
+	if ((*ecclayout)->eccbytes != (eccsteps*eccbytes)) {
+		printk(KERN_WARNING "invalid ecc layout\n");
+		goto fail;
+	}
+
+	nbc->eccmask = kmalloc(eccbytes, GFP_KERNEL);
+	nbc->errloc = kmalloc(t*sizeof(*nbc->errloc), GFP_KERNEL);
+	if (!nbc->eccmask || !nbc->errloc)
+		goto fail;
+	/*
+	 * compute and store the inverted ecc of an erased ecc block
+	 */
+	erased_page = kmalloc(eccsize, GFP_KERNEL);
+	if (!erased_page)
+		goto fail;
+
+	memset(erased_page, 0xff, eccsize);
+	memset(nbc->eccmask, 0, eccbytes);
+	encode_bch(nbc->bch, erased_page, eccsize, nbc->eccmask);
+	kfree(erased_page);
+
+	for (i = 0; i < eccbytes; i++)
+		nbc->eccmask[i] ^= 0xff;
+
+	return nbc;
+fail:
+	nand_bch_free(nbc);
+	return NULL;
+}
+EXPORT_SYMBOL(nand_bch_init);
+
+/**
+ * nand_bch_free - [NAND Interface] Release NAND BCH ECC resources
+ * @nbc:	NAND BCH control structure
+ */
+void nand_bch_free(struct nand_bch_control *nbc)
+{
+	if (nbc) {
+		free_bch(nbc->bch);
+		kfree(nbc->errloc);
+		kfree(nbc->eccmask);
+		kfree(nbc);
+	}
+}
+EXPORT_SYMBOL(nand_bch_free);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ivan Djelic <ivan.djelic@parrot.com>");
+MODULE_DESCRIPTION("NAND software BCH ECC support");
diff --git a/drivers/mtd/nand/nand_bcm_umi.c b/drivers/mtd/nand/nand_bcm_umi.c
deleted file mode 100644
index 46a6bc9c4b7..00000000000
--- a/drivers/mtd/nand/nand_bcm_umi.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2009 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/* ---- Include Files ---------------------------------------------------- */
-#include <mach/reg_umi.h>
-#include "nand_bcm_umi.h"
-#ifdef BOOT0_BUILD
-#include <uart.h>
-#endif
-
-/* ---- External Variable Declarations ----------------------------------- */
-/* ---- External Function Prototypes ------------------------------------- */
-/* ---- Public Variables ------------------------------------------------- */
-/* ---- Private Constants and Types -------------------------------------- */
-/* ---- Private Function Prototypes -------------------------------------- */
-/* ---- Private Variables ------------------------------------------------ */
-/* ---- Private Functions ------------------------------------------------ */
-
-#if NAND_ECC_BCH
-/****************************************************************************
-*  nand_bch_ecc_flip_bit - Routine to flip an errored bit
-*
-*  PURPOSE:
-*     This is a helper routine that flips the bit (0 -> 1 or 1 -> 0) of the
-*     errored bit specified
-*
-*  PARAMETERS:
-*     datap - Container that holds the 512 byte data
-*     errorLocation - Location of the bit that needs to be flipped
-*
-*  RETURNS:
-*     None
-****************************************************************************/
-static void nand_bcm_umi_bch_ecc_flip_bit(uint8_t *datap, int errorLocation)
-{
-	int locWithinAByte = (errorLocation & REG_UMI_BCH_ERR_LOC_BYTE) >> 0;
-	int locWithinAWord = (errorLocation & REG_UMI_BCH_ERR_LOC_WORD) >> 3;
-	int locWithinAPage = (errorLocation & REG_UMI_BCH_ERR_LOC_PAGE) >> 5;
-
-	uint8_t errorByte = 0;
-	uint8_t byteMask = 1 << locWithinAByte;
-
-	/* BCH uses big endian, need to change the location
-	 * bits to little endian */
-	locWithinAWord = 3 - locWithinAWord;
-
-	errorByte = datap[locWithinAPage * sizeof(uint32_t) + locWithinAWord];
-
-#ifdef BOOT0_BUILD
-	puthexs("\nECC Correct Offset: ",
-		locWithinAPage * sizeof(uint32_t) + locWithinAWord);
-	puthexs(" errorByte:", errorByte);
-	puthex8(" Bit: ", locWithinAByte);
-#endif
-
-	if (errorByte & byteMask) {
-		/* bit needs to be cleared */
-		errorByte &= ~byteMask;
-	} else {
-		/* bit needs to be set */
-		errorByte |= byteMask;
-	}
-
-	/* write back the value with the fixed bit */
-	datap[locWithinAPage * sizeof(uint32_t) + locWithinAWord] = errorByte;
-}
-
-/****************************************************************************
-*  nand_correct_page_bch - Routine to correct bit errors when reading NAND
-*
-*  PURPOSE:
-*     This routine reads the BCH registers to determine if there are any bit
-*     errors during the read of the last 512 bytes of data + ECC bytes.  If
-*     errors exists, the routine fixes it.
-*
-*  PARAMETERS:
-*     datap - Container that holds the 512 byte data
-*
-*  RETURNS:
-*     0 or greater = Number of errors corrected
-*                    (No errors are found or errors have been fixed)
-*    -1 = Error(s) cannot be fixed
-****************************************************************************/
-int nand_bcm_umi_bch_correct_page(uint8_t *datap, uint8_t *readEccData,
-				  int numEccBytes)
-{
-	int numErrors;
-	int errorLocation;
-	int idx;
-	uint32_t regValue;
-
-	/* wait for read ECC to be valid */
-	regValue = nand_bcm_umi_bch_poll_read_ecc_calc();
-
-	/*
-	 * read the control status register to determine if there
-	 * are error'ed bits
-	 * see if errors are correctible
-	 */
-	if ((regValue & REG_UMI_BCH_CTRL_STATUS_UNCORR_ERR) > 0) {
-		int i;
-
-		for (i = 0; i < numEccBytes; i++) {
-			if (readEccData[i] != 0xff) {
-				/* errors cannot be fixed, return -1 */
-				return -1;
-			}
-		}
-		/* If ECC is unprogrammed then we can't correct,
-		 * assume everything OK */
-		return 0;
-	}
-
-	if ((regValue & REG_UMI_BCH_CTRL_STATUS_CORR_ERR) == 0) {
-		/* no errors */
-		return 0;
-	}
-
-	/*
-	 * Fix errored bits by doing the following:
-	 * 1. Read the number of errors in the control and status register
-	 * 2. Read the error location registers that corresponds to the number
-	 *    of errors reported
-	 * 3. Invert the bit in the data
-	 */
-	numErrors = (regValue & REG_UMI_BCH_CTRL_STATUS_NB_CORR_ERROR) >> 20;
-
-	for (idx = 0; idx < numErrors; idx++) {
-		errorLocation =
-		    REG_UMI_BCH_ERR_LOC_ADDR(idx) & REG_UMI_BCH_ERR_LOC_MASK;
-
-		/* Flip bit */
-		nand_bcm_umi_bch_ecc_flip_bit(datap, errorLocation);
-	}
-	/* Errors corrected */
-	return numErrors;
-}
-#endif
diff --git a/drivers/mtd/nand/nand_bcm_umi.h b/drivers/mtd/nand/nand_bcm_umi.h
deleted file mode 100644
index 198b304d6f7..00000000000
--- a/drivers/mtd/nand/nand_bcm_umi.h
+++ /dev/null
@@ -1,337 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2009 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-#ifndef NAND_BCM_UMI_H
-#define NAND_BCM_UMI_H
-
-/* ---- Include Files ---------------------------------------------------- */
-#include <mach/reg_umi.h>
-#include <mach/reg_nand.h>
-#include <cfg_global.h>
-
-/* ---- Constants and Types ---------------------------------------------- */
-#if (CFG_GLOBAL_CHIP_FAMILY == CFG_GLOBAL_CHIP_FAMILY_BCMRING)
-#define NAND_ECC_BCH (CFG_GLOBAL_CHIP_REV > 0xA0)
-#else
-#define NAND_ECC_BCH 0
-#endif
-
-#define CFG_GLOBAL_NAND_ECC_BCH_NUM_BYTES	13
-
-#if NAND_ECC_BCH
-#ifdef BOOT0_BUILD
-#define NAND_ECC_NUM_BYTES 13
-#else
-#define NAND_ECC_NUM_BYTES CFG_GLOBAL_NAND_ECC_BCH_NUM_BYTES
-#endif
-#else
-#define NAND_ECC_NUM_BYTES 3
-#endif
-
-#define NAND_DATA_ACCESS_SIZE 512
-
-/* ---- Variable Externs ------------------------------------------ */
-/* ---- Function Prototypes --------------------------------------- */
-int nand_bcm_umi_bch_correct_page(uint8_t *datap, uint8_t *readEccData,
-				  int numEccBytes);
-
-/* Check in device is ready */
-static inline int nand_bcm_umi_dev_ready(void)
-{
-	return REG_UMI_NAND_RCSR & REG_UMI_NAND_RCSR_RDY;
-}
-
-/* Wait until device is ready */
-static inline void nand_bcm_umi_wait_till_ready(void)
-{
-	while (nand_bcm_umi_dev_ready() == 0)
-		;
-}
-
-/* Enable Hamming ECC */
-static inline void nand_bcm_umi_hamming_enable_hwecc(void)
-{
-	/* disable and reset ECC, 512 byte page */
-	REG_UMI_NAND_ECC_CSR &= ~(REG_UMI_NAND_ECC_CSR_ECC_ENABLE |
-		REG_UMI_NAND_ECC_CSR_256BYTE);
-	/* enable ECC */
-	REG_UMI_NAND_ECC_CSR |= REG_UMI_NAND_ECC_CSR_ECC_ENABLE;
-}
-
-#if NAND_ECC_BCH
-/* BCH ECC specifics */
-#define ECC_BITS_PER_CORRECTABLE_BIT 13
-
-/* Enable BCH Read ECC */
-static inline void nand_bcm_umi_bch_enable_read_hwecc(void)
-{
-	/* disable and reset ECC */
-	REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID;
-	/* Turn on ECC */
-	REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN;
-}
-
-/* Enable BCH Write ECC */
-static inline void nand_bcm_umi_bch_enable_write_hwecc(void)
-{
-	/* disable and reset ECC */
-	REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID;
-	/* Turn on ECC */
-	REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_ECC_WR_EN;
-}
-
-/* Config number of BCH ECC bytes */
-static inline void nand_bcm_umi_bch_config_ecc(uint8_t numEccBytes)
-{
-	uint32_t nValue;
-	uint32_t tValue;
-	uint32_t kValue;
-	uint32_t numBits = numEccBytes * 8;
-
-	/* disable and reset ECC */
-	REG_UMI_BCH_CTRL_STATUS =
-	    REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID |
-	    REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID;
-
-	/* Every correctible bit requires 13 ECC bits */
-	tValue = (uint32_t) (numBits / ECC_BITS_PER_CORRECTABLE_BIT);
-
-	/* Total data in number of bits for generating and computing BCH ECC */
-	nValue = (NAND_DATA_ACCESS_SIZE + numEccBytes) * 8;
-
-	/* K parameter is used internally.  K = N - (T * 13) */
-	kValue = nValue - (tValue * ECC_BITS_PER_CORRECTABLE_BIT);
-
-	/* Write the settings */
-	REG_UMI_BCH_N = nValue;
-	REG_UMI_BCH_T = tValue;
-	REG_UMI_BCH_K = kValue;
-}
-
-/* Pause during ECC read calculation to skip bytes in OOB */
-static inline void nand_bcm_umi_bch_pause_read_ecc_calc(void)
-{
-	REG_UMI_BCH_CTRL_STATUS =
-	    REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN |
-	    REG_UMI_BCH_CTRL_STATUS_PAUSE_ECC_DEC;
-}
-
-/* Resume during ECC read calculation after skipping bytes in OOB */
-static inline void nand_bcm_umi_bch_resume_read_ecc_calc(void)
-{
-	REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN;
-}
-
-/* Poll read ECC calc to check when hardware completes */
-static inline uint32_t nand_bcm_umi_bch_poll_read_ecc_calc(void)
-{
-	uint32_t regVal;
-
-	do {
-		/* wait for ECC to be valid */
-		regVal = REG_UMI_BCH_CTRL_STATUS;
-	} while ((regVal & REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID) == 0);
-
-	return regVal;
-}
-
-/* Poll write ECC calc to check when hardware completes */
-static inline void nand_bcm_umi_bch_poll_write_ecc_calc(void)
-{
-	/* wait for ECC to be valid */
-	while ((REG_UMI_BCH_CTRL_STATUS & REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID)
-	       == 0)
-		;
-}
-
-/* Read the OOB and ECC, for kernel write OOB to a buffer */
-#if defined(__KERNEL__) && !defined(STANDALONE)
-static inline void nand_bcm_umi_bch_read_oobEcc(uint32_t pageSize,
-	uint8_t *eccCalc, int numEccBytes, uint8_t *oobp)
-#else
-static inline void nand_bcm_umi_bch_read_oobEcc(uint32_t pageSize,
-	uint8_t *eccCalc, int numEccBytes)
-#endif
-{
-	int eccPos = 0;
-	int numToRead = 16;	/* There are 16 bytes per sector in the OOB */
-
-	/* ECC is already paused when this function is called */
-	if (pageSize != NAND_DATA_ACCESS_SIZE) {
-		/* skip BI */
-#if defined(__KERNEL__) && !defined(STANDALONE)
-		*oobp++ = REG_NAND_DATA8;
-#else
-		REG_NAND_DATA8;
-#endif
-		numToRead--;
-	}
-
-	while (numToRead > numEccBytes) {
-		/* skip free oob region */
-#if defined(__KERNEL__) && !defined(STANDALONE)
-		*oobp++ = REG_NAND_DATA8;
-#else
-		REG_NAND_DATA8;
-#endif
-		numToRead--;
-	}
-
-	if (pageSize == NAND_DATA_ACCESS_SIZE) {
-		/* read ECC bytes before BI */
-		nand_bcm_umi_bch_resume_read_ecc_calc();
-
-		while (numToRead > 11) {
-#if defined(__KERNEL__) && !defined(STANDALONE)
-			*oobp = REG_NAND_DATA8;
-			eccCalc[eccPos++] = *oobp;
-			oobp++;
-#else
-			eccCalc[eccPos++] = REG_NAND_DATA8;
-#endif
-			numToRead--;
-		}
-
-		nand_bcm_umi_bch_pause_read_ecc_calc();
-
-		if (numToRead == 11) {
-			/* read BI */
-#if defined(__KERNEL__) && !defined(STANDALONE)
-			*oobp++ = REG_NAND_DATA8;
-#else
-			REG_NAND_DATA8;
-#endif
-			numToRead--;
-		}
-
-	}
-	/* read ECC bytes */
-	nand_bcm_umi_bch_resume_read_ecc_calc();
-	while (numToRead) {
-#if defined(__KERNEL__) && !defined(STANDALONE)
-		*oobp = REG_NAND_DATA8;
-		eccCalc[eccPos++] = *oobp;
-		oobp++;
-#else
-		eccCalc[eccPos++] = REG_NAND_DATA8;
-#endif
-		numToRead--;
-	}
-}
-
-/* Helper function to write ECC */
-static inline void NAND_BCM_UMI_ECC_WRITE(int numEccBytes, int eccBytePos,
-					  uint8_t *oobp, uint8_t eccVal)
-{
-	if (eccBytePos <= numEccBytes)
-		*oobp = eccVal;
-}
-
-/* Write OOB with ECC */
-static inline void nand_bcm_umi_bch_write_oobEcc(uint32_t pageSize,
-						 uint8_t *oobp, int numEccBytes)
-{
-	uint32_t eccVal = 0xffffffff;
-
-	/* wait for write ECC to be valid */
-	nand_bcm_umi_bch_poll_write_ecc_calc();
-
-	/*
-	 ** Get the hardware ecc from the 32-bit result registers.
-	 ** Read after 512 byte accesses. Format B3B2B1B0
-	 ** where B3 = ecc3, etc.
-	 */
-
-	if (pageSize == NAND_DATA_ACCESS_SIZE) {
-		/* Now fill in the ECC bytes */
-		if (numEccBytes >= 13)
-			eccVal = REG_UMI_BCH_WR_ECC_3;
-
-		/* Usually we skip CM in oob[0,1] */
-		NAND_BCM_UMI_ECC_WRITE(numEccBytes, 15, &oobp[0],
-			(eccVal >> 16) & 0xff);
-		NAND_BCM_UMI_ECC_WRITE(numEccBytes, 14, &oobp[1],
-			(eccVal >> 8) & 0xff);
-
-		/* Write ECC in oob[2,3,4] */
-		NAND_BCM_UMI_ECC_WRITE(numEccBytes, 13, &oobp[2],
-			eccVal & 0xff);	/* ECC 12 */
-
-		if (numEccBytes >= 9)
-			eccVal = REG_UMI_BCH_WR_ECC_2;
-
-		NAND_BCM_UMI_ECC_WRITE(numEccBytes, 12, &oobp[3],
-			(eccVal >> 24) & 0xff);	/* ECC11 */
-		NAND_BCM_UMI_ECC_WRITE(numEccBytes, 11, &oobp[4],
-			(eccVal >> 16) & 0xff);	/* ECC10 */
-
-		/* Always Skip BI in oob[5] */
-	} else {
-		/* Always Skip BI in oob[0] */
-
-		/* Now fill in the ECC bytes */
-		if (numEccBytes >= 13)
-			eccVal = REG_UMI_BCH_WR_ECC_3;
-
-		/* Usually skip CM in oob[1,2] */
-		NAND_BCM_UMI_ECC_WRITE(numEccBytes, 15, &oobp[1],
-			(eccVal >> 16) & 0xff);
-		NAND_BCM_UMI_ECC_WRITE(numEccBytes, 14, &oobp[2],
-			(eccVal >> 8) & 0xff);
-
-		/* Write ECC in oob[3-15] */
-		NAND_BCM_UMI_ECC_WRITE(numEccBytes, 13, &oobp[3],
-			eccVal & 0xff);	/* ECC12 */
-
-		if (numEccBytes >= 9)
-			eccVal = REG_UMI_BCH_WR_ECC_2;
-
-		NAND_BCM_UMI_ECC_WRITE(numEccBytes, 12, &oobp[4],
-			(eccVal >> 24) & 0xff);	/* ECC11 */
-		NAND_BCM_UMI_ECC_WRITE(numEccBytes, 11, &oobp[5],
-			(eccVal >> 16) & 0xff);	/* ECC10 */
-	}
-
-	/* Fill in the remainder of ECC locations */
-	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 10, &oobp[6],
-		(eccVal >> 8) & 0xff);	/* ECC9 */
-	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 9, &oobp[7],
-		eccVal & 0xff);	/* ECC8 */
-
-	if (numEccBytes >= 5)
-		eccVal = REG_UMI_BCH_WR_ECC_1;
-
-	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 8, &oobp[8],
-		(eccVal >> 24) & 0xff);	/* ECC7 */
-	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 7, &oobp[9],
-		(eccVal >> 16) & 0xff);	/* ECC6 */
-	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 6, &oobp[10],
-		(eccVal >> 8) & 0xff);	/* ECC5 */
-	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 5, &oobp[11],
-		eccVal & 0xff);	/* ECC4 */
-
-	if (numEccBytes >= 1)
-		eccVal = REG_UMI_BCH_WR_ECC_0;
-
-	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 4, &oobp[12],
-		(eccVal >> 24) & 0xff);	/* ECC3 */
-	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 3, &oobp[13],
-		(eccVal >> 16) & 0xff);	/* ECC2 */
-	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 2, &oobp[14],
-		(eccVal >> 8) & 0xff);	/* ECC1 */
-	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 1, &oobp[15],
-		eccVal & 0xff);	/* ECC0 */
-}
-#endif
-
-#endif /* NAND_BCM_UMI_H */
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index 271b8e735e8..97c4c0216c9 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -55,8 +55,7 @@ struct mtd_info;
 #define MODULE_AUTHOR(x)	/* x */
 #define MODULE_DESCRIPTION(x)	/* x */
 
-#define printk printf
-#define KERN_ERR		""
+#define pr_err printf
 #endif
 
 /*
@@ -110,7 +109,7 @@ static const char bitsperbyte[256] = {
 
 /*
  * addressbits is a lookup table to filter out the bits from the xor-ed
- * ecc data that identify the faulty location.
+ * ECC data that identify the faulty location.
  * this is only used for repairing parity
  * see the comments in nand_correct_data for more details
  */
@@ -153,7 +152,7 @@ static const char addressbits[256] = {
  * __nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256/512-byte
  *			 block
  * @buf:	input buffer with raw data
- * @eccsize:	data bytes per ecc step (256 or 512)
+ * @eccsize:	data bytes per ECC step (256 or 512)
  * @code:	output buffer with ECC
  */
 void __nand_calculate_ecc(const unsigned char *buf, unsigned int eccsize,
@@ -348,7 +347,7 @@ void __nand_calculate_ecc(const unsigned char *buf, unsigned int eccsize,
 		rp17 = (par ^ rp16) & 0xff;
 
 	/*
-	 * Finally calculate the ecc bits.
+	 * Finally calculate the ECC bits.
 	 * Again here it might seem that there are performance optimisations
 	 * possible, but benchmarks showed that on the system this is developed
 	 * the code below is the fastest
@@ -436,7 +435,7 @@ EXPORT_SYMBOL(nand_calculate_ecc);
  * @buf:	raw data read from the chip
  * @read_ecc:	ECC from the chip
  * @calc_ecc:	the ECC calculated from raw data
- * @eccsize:	data bytes per ecc step (256 or 512)
+ * @eccsize:	data bytes per ECC step (256 or 512)
  *
  * Detect and correct a 1 bit error for eccsize byte block
  */
@@ -505,9 +504,9 @@ int __nand_correct_data(unsigned char *buf,
 	}
 	/* count nr of bits; use table lookup, faster than calculating it */
 	if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1)
-		return 1;	/* error in ecc data; no action needed */
+		return 1;	/* error in ECC data; no action needed */
 
-	printk(KERN_ERR "uncorrectable error : ");
+	pr_err("%s: uncorrectable ECC error\n", __func__);
 	return -1;
 }
 EXPORT_SYMBOL(__nand_correct_data);
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index 89907ed9900..3d7c89fc103 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -10,127 +10,156 @@
  */
 #include <linux/module.h>
 #include <linux/mtd/nand.h>
+#include <linux/sizes.h>
+
+#define LP_OPTIONS NAND_SAMSUNG_LP_OPTIONS
+#define LP_OPTIONS16 (LP_OPTIONS | NAND_BUSWIDTH_16)
+
+#define SP_OPTIONS NAND_NEED_READRDY
+#define SP_OPTIONS16 (SP_OPTIONS | NAND_BUSWIDTH_16)
+
 /*
-*	Chip ID list
-*
-*	Name. ID code, pagesize, chipsize in MegaByte, eraseblock size,
-*	options
-*
-*	Pagesize; 0, 256, 512
-*	0	get this information from the extended chip ID
-+	256	256 Byte page size
-*	512	512 Byte page size
-*/
+ * The chip ID list:
+ *    name, device ID, page size, chip size in MiB, eraseblock size, options
+ *
+ * If page size and eraseblock size are 0, the sizes are taken from the
+ * extended chip ID.
+ */
 struct nand_flash_dev nand_flash_ids[] = {
-
-#ifdef CONFIG_MTD_NAND_MUSEUM_IDS
-	{"NAND 1MiB 5V 8-bit",		0x6e, 256, 1, 0x1000, 0},
-	{"NAND 2MiB 5V 8-bit",		0x64, 256, 2, 0x1000, 0},
-	{"NAND 4MiB 5V 8-bit",		0x6b, 512, 4, 0x2000, 0},
-	{"NAND 1MiB 3,3V 8-bit",	0xe8, 256, 1, 0x1000, 0},
-	{"NAND 1MiB 3,3V 8-bit",	0xec, 256, 1, 0x1000, 0},
-	{"NAND 2MiB 3,3V 8-bit",	0xea, 256, 2, 0x1000, 0},
-	{"NAND 4MiB 3,3V 8-bit",	0xd5, 512, 4, 0x2000, 0},
-	{"NAND 4MiB 3,3V 8-bit",	0xe3, 512, 4, 0x2000, 0},
-	{"NAND 4MiB 3,3V 8-bit",	0xe5, 512, 4, 0x2000, 0},
-	{"NAND 8MiB 3,3V 8-bit",	0xd6, 512, 8, 0x2000, 0},
-
-	{"NAND 8MiB 1,8V 8-bit",	0x39, 512, 8, 0x2000, 0},
-	{"NAND 8MiB 3,3V 8-bit",	0xe6, 512, 8, 0x2000, 0},
-	{"NAND 8MiB 1,8V 16-bit",	0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16},
-	{"NAND 8MiB 3,3V 16-bit",	0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16},
-#endif
-
-	{"NAND 16MiB 1,8V 8-bit",	0x33, 512, 16, 0x4000, 0},
-	{"NAND 16MiB 3,3V 8-bit",	0x73, 512, 16, 0x4000, 0},
-	{"NAND 16MiB 1,8V 16-bit",	0x43, 512, 16, 0x4000, NAND_BUSWIDTH_16},
-	{"NAND 16MiB 3,3V 16-bit",	0x53, 512, 16, 0x4000, NAND_BUSWIDTH_16},
-
-	{"NAND 32MiB 1,8V 8-bit",	0x35, 512, 32, 0x4000, 0},
-	{"NAND 32MiB 3,3V 8-bit",	0x75, 512, 32, 0x4000, 0},
-	{"NAND 32MiB 1,8V 16-bit",	0x45, 512, 32, 0x4000, NAND_BUSWIDTH_16},
-	{"NAND 32MiB 3,3V 16-bit",	0x55, 512, 32, 0x4000, NAND_BUSWIDTH_16},
-
-	{"NAND 64MiB 1,8V 8-bit",	0x36, 512, 64, 0x4000, 0},
-	{"NAND 64MiB 3,3V 8-bit",	0x76, 512, 64, 0x4000, 0},
-	{"NAND 64MiB 1,8V 16-bit",	0x46, 512, 64, 0x4000, NAND_BUSWIDTH_16},
-	{"NAND 64MiB 3,3V 16-bit",	0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16},
-
-	{"NAND 128MiB 1,8V 8-bit",	0x78, 512, 128, 0x4000, 0},
-	{"NAND 128MiB 1,8V 8-bit",	0x39, 512, 128, 0x4000, 0},
-	{"NAND 128MiB 3,3V 8-bit",	0x79, 512, 128, 0x4000, 0},
-	{"NAND 128MiB 1,8V 16-bit",	0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16},
-	{"NAND 128MiB 1,8V 16-bit",	0x49, 512, 128, 0x4000, NAND_BUSWIDTH_16},
-	{"NAND 128MiB 3,3V 16-bit",	0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16},
-	{"NAND 128MiB 3,3V 16-bit",	0x59, 512, 128, 0x4000, NAND_BUSWIDTH_16},
-
-	{"NAND 256MiB 3,3V 8-bit",	0x71, 512, 256, 0x4000, 0},
+	/*
+	 * Some incompatible NAND chips share device ID's and so must be
+	 * listed by full ID. We list them first so that we can easily identify
+	 * the most specific match.
+	 */
+	{"TC58NVG2S0F 4G 3.3V 8-bit",
+		{ .id = {0x98, 0xdc, 0x90, 0x26, 0x76, 0x15, 0x01, 0x08} },
+		  SZ_4K, SZ_512, SZ_256K, 0, 8, 224, NAND_ECC_INFO(4, SZ_512) },
+	{"TC58NVG3S0F 8G 3.3V 8-bit",
+		{ .id = {0x98, 0xd3, 0x90, 0x26, 0x76, 0x15, 0x02, 0x08} },
+		  SZ_4K, SZ_1K, SZ_256K, 0, 8, 232, NAND_ECC_INFO(4, SZ_512) },
+	{"TC58NVG5D2 32G 3.3V 8-bit",
+		{ .id = {0x98, 0xd7, 0x94, 0x32, 0x76, 0x56, 0x09, 0x00} },
+		  SZ_8K, SZ_4K, SZ_1M, 0, 8, 640, NAND_ECC_INFO(40, SZ_1K) },
+	{"TC58NVG6D2 64G 3.3V 8-bit",
+		{ .id = {0x98, 0xde, 0x94, 0x82, 0x76, 0x56, 0x04, 0x20} },
+		  SZ_8K, SZ_8K, SZ_2M, 0, 8, 640, NAND_ECC_INFO(40, SZ_1K) },
+	{"SDTNRGAMA 64G 3.3V 8-bit",
+		{ .id = {0x45, 0xde, 0x94, 0x93, 0x76, 0x50} },
+		  SZ_16K, SZ_8K, SZ_4M, 0, 6, 1280, NAND_ECC_INFO(40, SZ_1K) },
+
+	LEGACY_ID_NAND("NAND 4MiB 5V 8-bit",   0x6B, 4, SZ_8K, SP_OPTIONS),
+	LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),
+	LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE5, 4, SZ_8K, SP_OPTIONS),
+	LEGACY_ID_NAND("NAND 8MiB 3,3V 8-bit", 0xD6, 8, SZ_8K, SP_OPTIONS),
+	LEGACY_ID_NAND("NAND 8MiB 3,3V 8-bit", 0xE6, 8, SZ_8K, SP_OPTIONS),
+
+	LEGACY_ID_NAND("NAND 16MiB 1,8V 8-bit",  0x33, 16, SZ_16K, SP_OPTIONS),
+	LEGACY_ID_NAND("NAND 16MiB 3,3V 8-bit",  0x73, 16, SZ_16K, SP_OPTIONS),
+	LEGACY_ID_NAND("NAND 16MiB 1,8V 16-bit", 0x43, 16, SZ_16K, SP_OPTIONS16),
+	LEGACY_ID_NAND("NAND 16MiB 3,3V 16-bit", 0x53, 16, SZ_16K, SP_OPTIONS16),
+
+	LEGACY_ID_NAND("NAND 32MiB 1,8V 8-bit",  0x35, 32, SZ_16K, SP_OPTIONS),
+	LEGACY_ID_NAND("NAND 32MiB 3,3V 8-bit",  0x75, 32, SZ_16K, SP_OPTIONS),
+	LEGACY_ID_NAND("NAND 32MiB 1,8V 16-bit", 0x45, 32, SZ_16K, SP_OPTIONS16),
+	LEGACY_ID_NAND("NAND 32MiB 3,3V 16-bit", 0x55, 32, SZ_16K, SP_OPTIONS16),
+
+	LEGACY_ID_NAND("NAND 64MiB 1,8V 8-bit",  0x36, 64, SZ_16K, SP_OPTIONS),
+	LEGACY_ID_NAND("NAND 64MiB 3,3V 8-bit",  0x76, 64, SZ_16K, SP_OPTIONS),
+	LEGACY_ID_NAND("NAND 64MiB 1,8V 16-bit", 0x46, 64, SZ_16K, SP_OPTIONS16),
+	LEGACY_ID_NAND("NAND 64MiB 3,3V 16-bit", 0x56, 64, SZ_16K, SP_OPTIONS16),
+
+	LEGACY_ID_NAND("NAND 128MiB 1,8V 8-bit",  0x78, 128, SZ_16K, SP_OPTIONS),
+	LEGACY_ID_NAND("NAND 128MiB 1,8V 8-bit",  0x39, 128, SZ_16K, SP_OPTIONS),
+	LEGACY_ID_NAND("NAND 128MiB 3,3V 8-bit",  0x79, 128, SZ_16K, SP_OPTIONS),
+	LEGACY_ID_NAND("NAND 128MiB 1,8V 16-bit", 0x72, 128, SZ_16K, SP_OPTIONS16),
+	LEGACY_ID_NAND("NAND 128MiB 1,8V 16-bit", 0x49, 128, SZ_16K, SP_OPTIONS16),
+	LEGACY_ID_NAND("NAND 128MiB 3,3V 16-bit", 0x74, 128, SZ_16K, SP_OPTIONS16),
+	LEGACY_ID_NAND("NAND 128MiB 3,3V 16-bit", 0x59, 128, SZ_16K, SP_OPTIONS16),
+
+	LEGACY_ID_NAND("NAND 256MiB 3,3V 8-bit", 0x71, 256, SZ_16K, SP_OPTIONS),
 
 	/*
-	 * These are the new chips with large page size. The pagesize and the
-	 * erasesize is determined from the extended id bytes
+	 * These are the new chips with large page size. Their page size and
+	 * eraseblock size are determined from the extended ID bytes.
 	 */
-#define LP_OPTIONS (NAND_SAMSUNG_LP_OPTIONS | NAND_NO_READRDY | NAND_NO_AUTOINCR)
-#define LP_OPTIONS16 (LP_OPTIONS | NAND_BUSWIDTH_16)
 
-	/*512 Megabit */
-	{"NAND 64MiB 1,8V 8-bit",	0xA2, 0,  64, 0, LP_OPTIONS},
-	{"NAND 64MiB 3,3V 8-bit",	0xF2, 0,  64, 0, LP_OPTIONS},
-	{"NAND 64MiB 1,8V 16-bit",	0xB2, 0,  64, 0, LP_OPTIONS16},
-	{"NAND 64MiB 3,3V 16-bit",	0xC2, 0,  64, 0, LP_OPTIONS16},
+	/* 512 Megabit */
+	EXTENDED_ID_NAND("NAND 64MiB 1,8V 8-bit",  0xA2,  64, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 64MiB 1,8V 8-bit",  0xA0,  64, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 64MiB 3,3V 8-bit",  0xF2,  64, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 64MiB 3,3V 8-bit",  0xD0,  64, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 64MiB 3,3V 8-bit",  0xF0,  64, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 64MiB 1,8V 16-bit", 0xB2,  64, LP_OPTIONS16),
+	EXTENDED_ID_NAND("NAND 64MiB 1,8V 16-bit", 0xB0,  64, LP_OPTIONS16),
+	EXTENDED_ID_NAND("NAND 64MiB 3,3V 16-bit", 0xC2,  64, LP_OPTIONS16),
+	EXTENDED_ID_NAND("NAND 64MiB 3,3V 16-bit", 0xC0,  64, LP_OPTIONS16),
 
 	/* 1 Gigabit */
-	{"NAND 128MiB 1,8V 8-bit",	0xA1, 0, 128, 0, LP_OPTIONS},
-	{"NAND 128MiB 3,3V 8-bit",	0xF1, 0, 128, 0, LP_OPTIONS},
-	{"NAND 128MiB 3,3V 8-bit",	0xD1, 0, 128, 0, LP_OPTIONS},
-	{"NAND 128MiB 1,8V 16-bit",	0xB1, 0, 128, 0, LP_OPTIONS16},
-	{"NAND 128MiB 3,3V 16-bit",	0xC1, 0, 128, 0, LP_OPTIONS16},
+	EXTENDED_ID_NAND("NAND 128MiB 1,8V 8-bit",  0xA1, 128, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 128MiB 3,3V 8-bit",  0xF1, 128, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 128MiB 3,3V 8-bit",  0xD1, 128, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 128MiB 1,8V 16-bit", 0xB1, 128, LP_OPTIONS16),
+	EXTENDED_ID_NAND("NAND 128MiB 3,3V 16-bit", 0xC1, 128, LP_OPTIONS16),
+	EXTENDED_ID_NAND("NAND 128MiB 1,8V 16-bit", 0xAD, 128, LP_OPTIONS16),
 
 	/* 2 Gigabit */
-	{"NAND 256MiB 1,8V 8-bit",	0xAA, 0, 256, 0, LP_OPTIONS},
-	{"NAND 256MiB 3,3V 8-bit",	0xDA, 0, 256, 0, LP_OPTIONS},
-	{"NAND 256MiB 1,8V 16-bit",	0xBA, 0, 256, 0, LP_OPTIONS16},
-	{"NAND 256MiB 3,3V 16-bit",	0xCA, 0, 256, 0, LP_OPTIONS16},
+	EXTENDED_ID_NAND("NAND 256MiB 1,8V 8-bit",  0xAA, 256, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 256MiB 3,3V 8-bit",  0xDA, 256, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 256MiB 1,8V 16-bit", 0xBA, 256, LP_OPTIONS16),
+	EXTENDED_ID_NAND("NAND 256MiB 3,3V 16-bit", 0xCA, 256, LP_OPTIONS16),
 
 	/* 4 Gigabit */
-	{"NAND 512MiB 1,8V 8-bit",	0xAC, 0, 512, 0, LP_OPTIONS},
-	{"NAND 512MiB 3,3V 8-bit",	0xDC, 0, 512, 0, LP_OPTIONS},
-	{"NAND 512MiB 1,8V 16-bit",	0xBC, 0, 512, 0, LP_OPTIONS16},
-	{"NAND 512MiB 3,3V 16-bit",	0xCC, 0, 512, 0, LP_OPTIONS16},
+	EXTENDED_ID_NAND("NAND 512MiB 1,8V 8-bit",  0xAC, 512, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 512MiB 3,3V 8-bit",  0xDC, 512, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 512MiB 1,8V 16-bit", 0xBC, 512, LP_OPTIONS16),
+	EXTENDED_ID_NAND("NAND 512MiB 3,3V 16-bit", 0xCC, 512, LP_OPTIONS16),
 
 	/* 8 Gigabit */
-	{"NAND 1GiB 1,8V 8-bit",	0xA3, 0, 1024, 0, LP_OPTIONS},
-	{"NAND 1GiB 3,3V 8-bit",	0xD3, 0, 1024, 0, LP_OPTIONS},
-	{"NAND 1GiB 1,8V 16-bit",	0xB3, 0, 1024, 0, LP_OPTIONS16},
-	{"NAND 1GiB 3,3V 16-bit",	0xC3, 0, 1024, 0, LP_OPTIONS16},
+	EXTENDED_ID_NAND("NAND 1GiB 1,8V 8-bit",  0xA3, 1024, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 1GiB 3,3V 8-bit",  0xD3, 1024, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 1GiB 1,8V 16-bit", 0xB3, 1024, LP_OPTIONS16),
+	EXTENDED_ID_NAND("NAND 1GiB 3,3V 16-bit", 0xC3, 1024, LP_OPTIONS16),
 
 	/* 16 Gigabit */
-	{"NAND 2GiB 1,8V 8-bit",	0xA5, 0, 2048, 0, LP_OPTIONS},
-	{"NAND 2GiB 3,3V 8-bit",	0xD5, 0, 2048, 0, LP_OPTIONS},
-	{"NAND 2GiB 1,8V 16-bit",	0xB5, 0, 2048, 0, LP_OPTIONS16},
-	{"NAND 2GiB 3,3V 16-bit",	0xC5, 0, 2048, 0, LP_OPTIONS16},
-
-	/*
-	 * Renesas AND 1 Gigabit. Those chips do not support extended id and
-	 * have a strange page/block layout !  The chosen minimum erasesize is
-	 * 4 * 2 * 2048 = 16384 Byte, as those chips have an array of 4 page
-	 * planes 1 block = 2 pages, but due to plane arrangement the blocks
-	 * 0-3 consists of page 0 + 4,1 + 5, 2 + 6, 3 + 7 Anyway JFFS2 would
-	 * increase the eraseblock size so we chose a combined one which can be
-	 * erased in one go There are more speed improvements for reads and
-	 * writes possible, but not implemented now
-	 */
-	{"AND 128MiB 3,3V 8-bit",	0x01, 2048, 128, 0x4000,
-	 NAND_IS_AND | NAND_NO_AUTOINCR |NAND_NO_READRDY | NAND_4PAGE_ARRAY |
-	 BBT_AUTO_REFRESH
-	},
-
-	{NULL,}
+	EXTENDED_ID_NAND("NAND 2GiB 1,8V 8-bit",  0xA5, 2048, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 2GiB 3,3V 8-bit",  0xD5, 2048, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 2GiB 1,8V 16-bit", 0xB5, 2048, LP_OPTIONS16),
+	EXTENDED_ID_NAND("NAND 2GiB 3,3V 16-bit", 0xC5, 2048, LP_OPTIONS16),
+
+	/* 32 Gigabit */
+	EXTENDED_ID_NAND("NAND 4GiB 1,8V 8-bit",  0xA7, 4096, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 4GiB 3,3V 8-bit",  0xD7, 4096, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 4GiB 1,8V 16-bit", 0xB7, 4096, LP_OPTIONS16),
+	EXTENDED_ID_NAND("NAND 4GiB 3,3V 16-bit", 0xC7, 4096, LP_OPTIONS16),
+
+	/* 64 Gigabit */
+	EXTENDED_ID_NAND("NAND 8GiB 1,8V 8-bit",  0xAE, 8192, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 8GiB 3,3V 8-bit",  0xDE, 8192, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 8GiB 1,8V 16-bit", 0xBE, 8192, LP_OPTIONS16),
+	EXTENDED_ID_NAND("NAND 8GiB 3,3V 16-bit", 0xCE, 8192, LP_OPTIONS16),
+
+	/* 128 Gigabit */
+	EXTENDED_ID_NAND("NAND 16GiB 1,8V 8-bit",  0x1A, 16384, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 16GiB 3,3V 8-bit",  0x3A, 16384, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 16GiB 1,8V 16-bit", 0x2A, 16384, LP_OPTIONS16),
+	EXTENDED_ID_NAND("NAND 16GiB 3,3V 16-bit", 0x4A, 16384, LP_OPTIONS16),
+
+	/* 256 Gigabit */
+	EXTENDED_ID_NAND("NAND 32GiB 1,8V 8-bit",  0x1C, 32768, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 32GiB 3,3V 8-bit",  0x3C, 32768, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 32GiB 1,8V 16-bit", 0x2C, 32768, LP_OPTIONS16),
+	EXTENDED_ID_NAND("NAND 32GiB 3,3V 16-bit", 0x4C, 32768, LP_OPTIONS16),
+
+	/* 512 Gigabit */
+	EXTENDED_ID_NAND("NAND 64GiB 1,8V 8-bit",  0x1E, 65536, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 64GiB 3,3V 8-bit",  0x3E, 65536, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 64GiB 1,8V 16-bit", 0x2E, 65536, LP_OPTIONS16),
+	EXTENDED_ID_NAND("NAND 64GiB 3,3V 16-bit", 0x4E, 65536, LP_OPTIONS16),
+
+	{NULL}
 };
 
-/*
-*	Manufacturer ID list
-*/
+/* Manufacturer IDs */
 struct nand_manufacturers nand_manuf_ids[] = {
 	{NAND_MFR_TOSHIBA, "Toshiba"},
 	{NAND_MFR_SAMSUNG, "Samsung"},
@@ -140,7 +169,11 @@ struct nand_manufacturers nand_manuf_ids[] = {
 	{NAND_MFR_STMICRO, "ST Micro"},
 	{NAND_MFR_HYNIX, "Hynix"},
 	{NAND_MFR_MICRON, "Micron"},
-	{NAND_MFR_AMD, "AMD"},
+	{NAND_MFR_AMD, "AMD/Spansion"},
+	{NAND_MFR_MACRONIX, "Macronix"},
+	{NAND_MFR_EON, "Eon"},
+	{NAND_MFR_SANDISK, "SanDisk"},
+	{NAND_MFR_INTEL, "Intel"},
 	{0x0, "Unknown"}
 };
 
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 261337efe0e..4f0d83648e5 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -28,12 +28,13 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/vmalloc.h>
-#include <asm/div64.h>
+#include <linux/math64.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
+#include <linux/mtd/nand_bch.h>
 #include <linux/mtd/partitions.h>
 #include <linux/delay.h>
 #include <linux/list.h>
@@ -41,6 +42,8 @@
 #include <linux/sched.h>
 #include <linux/fs.h>
 #include <linux/pagemap.h>
+#include <linux/seq_file.h>
+#include <linux/debugfs.h>
 
 /* Default simulator parameters values */
 #if !defined(CONFIG_NANDSIM_FIRST_ID_BYTE)  || \
@@ -104,9 +107,10 @@ static char *weakblocks = NULL;
 static char *weakpages = NULL;
 static unsigned int bitflips = 0;
 static char *gravepages = NULL;
-static unsigned int rptwear = 0;
 static unsigned int overridesize = 0;
 static char *cache_file = NULL;
+static unsigned int bbt;
+static unsigned int bch;
 
 module_param(first_id_byte,  uint, 0400);
 module_param(second_id_byte, uint, 0400);
@@ -127,9 +131,10 @@ module_param(weakblocks,     charp, 0400);
 module_param(weakpages,      charp, 0400);
 module_param(bitflips,       uint, 0400);
 module_param(gravepages,     charp, 0400);
-module_param(rptwear,        uint, 0400);
 module_param(overridesize,   uint, 0400);
 module_param(cache_file,     charp, 0400);
+module_param(bbt,	     uint, 0400);
+module_param(bch,	     uint, 0400);
 
 MODULE_PARM_DESC(first_id_byte,  "The first byte returned by NAND Flash 'read ID' command (manufacturer ID)");
 MODULE_PARM_DESC(second_id_byte, "The second byte returned by NAND Flash 'read ID' command (chip ID)");
@@ -157,11 +162,13 @@ MODULE_PARM_DESC(bitflips,       "Maximum number of random bit flips per page (z
 MODULE_PARM_DESC(gravepages,     "Pages that lose data [: maximum reads (defaults to 3)]"
 				 " separated by commas e.g. 1401:2 means page 1401"
 				 " can be read only twice before failing");
-MODULE_PARM_DESC(rptwear,        "Number of erases inbetween reporting wear, if not zero");
 MODULE_PARM_DESC(overridesize,   "Specifies the NAND Flash size overriding the ID bytes. "
 				 "The size is specified in erase blocks and as the exponent of a power of two"
 				 " e.g. 5 means a size of 32 erase blocks");
 MODULE_PARM_DESC(cache_file,     "File to use to cache nand pages instead of memory");
+MODULE_PARM_DESC(bbt,		 "0 OOB, 1 BBT with marker in OOB, 2 BBT with marker in data area");
+MODULE_PARM_DESC(bch,		 "Enable BCH ecc and set how many bits should "
+				 "be correctable in 512-byte blocks");
 
 /* The largest possible page size */
 #define NS_LARGEST_PAGE_SIZE	4096
@@ -198,7 +205,7 @@ MODULE_PARM_DESC(cache_file,     "File to use to cache nand pages instead of mem
 
 /* Calculate the page offset in flash RAM image by (row, column) address */
 #define NS_RAW_OFFSET(ns) \
-	(((ns)->regs.row << (ns)->geom.pgshift) + ((ns)->regs.row * (ns)->geom.oobsz) + (ns)->regs.column)
+	(((ns)->regs.row * (ns)->geom.pgszoob) + (ns)->regs.column)
 
 /* Calculate the OOB offset in flash RAM image by (row, column) address */
 #define NS_RAW_OFFSET_OOB(ns) (NS_RAW_OFFSET(ns) + ns->geom.pgsz)
@@ -207,12 +214,11 @@ MODULE_PARM_DESC(cache_file,     "File to use to cache nand pages instead of mem
 #define STATE_CMD_READ0        0x00000001 /* read data from the beginning of page */
 #define STATE_CMD_READ1        0x00000002 /* read data from the second half of page */
 #define STATE_CMD_READSTART    0x00000003 /* read data second command (large page devices) */
-#define STATE_CMD_PAGEPROG     0x00000004 /* start page programm */
+#define STATE_CMD_PAGEPROG     0x00000004 /* start page program */
 #define STATE_CMD_READOOB      0x00000005 /* read OOB area */
 #define STATE_CMD_ERASE1       0x00000006 /* sector erase first command */
 #define STATE_CMD_STATUS       0x00000007 /* read status */
-#define STATE_CMD_STATUS_M     0x00000008 /* read multi-plane status (isn't implemented) */
-#define STATE_CMD_SEQIN        0x00000009 /* sequential data imput */
+#define STATE_CMD_SEQIN        0x00000009 /* sequential data input */
 #define STATE_CMD_READID       0x0000000A /* read ID */
 #define STATE_CMD_ERASE2       0x0000000B /* sector erase second command */
 #define STATE_CMD_RESET        0x0000000C /* reset */
@@ -227,7 +233,7 @@ MODULE_PARM_DESC(cache_file,     "File to use to cache nand pages instead of mem
 #define STATE_ADDR_ZERO        0x00000040 /* one byte zero address was accepted */
 #define STATE_ADDR_MASK        0x00000070 /* address states mask */
 
-/* Durind data input/output the simulator is in these states */
+/* During data input/output the simulator is in these states */
 #define STATE_DATAIN           0x00000100 /* waiting for data input */
 #define STATE_DATAIN_MASK      0x00000100 /* data input states mask */
 
@@ -245,7 +251,7 @@ MODULE_PARM_DESC(cache_file,     "File to use to cache nand pages instead of mem
 
 /* Simulator's actions bit masks */
 #define ACTION_CPY       0x00100000 /* copy page/OOB to the internal buffer */
-#define ACTION_PRGPAGE   0x00200000 /* programm the internal buffer to flash */
+#define ACTION_PRGPAGE   0x00200000 /* program the internal buffer to flash */
 #define ACTION_SECERASE  0x00300000 /* erase sector */
 #define ACTION_ZEROOFF   0x00400000 /* don't add any offset to address */
 #define ACTION_HALFOFF   0x00500000 /* add to address half of page */
@@ -256,22 +262,20 @@ MODULE_PARM_DESC(cache_file,     "File to use to cache nand pages instead of mem
 #define NS_OPER_STATES   6  /* Maximum number of states in operation */
 
 #define OPT_ANY          0xFFFFFFFF /* any chip supports this operation */
-#define OPT_PAGE256      0x00000001 /* 256-byte  page chips */
 #define OPT_PAGE512      0x00000002 /* 512-byte  page chips */
 #define OPT_PAGE2048     0x00000008 /* 2048-byte page chips */
 #define OPT_SMARTMEDIA   0x00000010 /* SmartMedia technology chips */
-#define OPT_AUTOINCR     0x00000020 /* page number auto inctimentation is possible */
 #define OPT_PAGE512_8BIT 0x00000040 /* 512-byte page chips with 8-bit bus width */
 #define OPT_PAGE4096     0x00000080 /* 4096-byte page chips */
 #define OPT_LARGEPAGE    (OPT_PAGE2048 | OPT_PAGE4096) /* 2048 & 4096-byte page chips */
-#define OPT_SMALLPAGE    (OPT_PAGE256  | OPT_PAGE512)  /* 256 and 512-byte page chips */
+#define OPT_SMALLPAGE    (OPT_PAGE512) /* 512-byte page chips */
 
-/* Remove action bits ftom state */
+/* Remove action bits from state */
 #define NS_STATE(x) ((x) & ~ACTION_MASK)
 
 /*
  * Maximum previous states which need to be saved. Currently saving is
- * only needed for page programm operation with preceeded read command
+ * only needed for page program operation with preceded read command
  * (which is only valid for 512-byte pages).
  */
 #define NS_MAX_PREVSTATES 1
@@ -279,6 +283,11 @@ MODULE_PARM_DESC(cache_file,     "File to use to cache nand pages instead of mem
 /* Maximum page cache pages needed to read or write a NAND page to the cache_file */
 #define NS_MAX_HELD_PAGES 16
 
+struct nandsim_debug_info {
+	struct dentry *dfs_root;
+	struct dentry *dfs_wear_report;
+};
+
 /*
  * A union to represent flash memory contents and flash buffer.
  */
@@ -327,7 +336,6 @@ struct nandsim {
 		uint pgsec;         /* number of pages per sector */
 		uint secshift;      /* bits number in sector size */
 		uint pgshift;       /* bits number in page size */
-		uint oobshift;      /* bits number in OOB size */
 		uint pgaddrbytes;   /* bytes per page address */
 		uint secaddrbytes;  /* bytes per sector address */
 		uint idbytes;       /* the number ID bytes that this chip outputs */
@@ -354,10 +362,12 @@ struct nandsim {
 
 	/* Fields needed when using a cache file */
 	struct file *cfile; /* Open file */
-	unsigned char *pages_written; /* Which pages have been written */
+	unsigned long *pages_written; /* Which pages have been written */
 	void *file_buf;
 	struct page *held_pages[NS_MAX_HELD_PAGES];
 	int held_cnt;
+
+	struct nandsim_debug_info dbg;
 };
 
 /*
@@ -377,24 +387,22 @@ static struct nandsim_operations {
 	/* Read OOB */
 	{OPT_SMALLPAGE, {STATE_CMD_READOOB | ACTION_OOBOFF, STATE_ADDR_PAGE | ACTION_CPY,
 			STATE_DATAOUT, STATE_READY}},
-	/* Programm page starting from the beginning */
+	/* Program page starting from the beginning */
 	{OPT_ANY, {STATE_CMD_SEQIN, STATE_ADDR_PAGE, STATE_DATAIN,
 			STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
-	/* Programm page starting from the beginning */
+	/* Program page starting from the beginning */
 	{OPT_SMALLPAGE, {STATE_CMD_READ0, STATE_CMD_SEQIN | ACTION_ZEROOFF, STATE_ADDR_PAGE,
 			      STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
-	/* Programm page starting from the second half */
+	/* Program page starting from the second half */
 	{OPT_PAGE512, {STATE_CMD_READ1, STATE_CMD_SEQIN | ACTION_HALFOFF, STATE_ADDR_PAGE,
 			      STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
-	/* Programm OOB */
+	/* Program OOB */
 	{OPT_SMALLPAGE, {STATE_CMD_READOOB, STATE_CMD_SEQIN | ACTION_OOBOFF, STATE_ADDR_PAGE,
 			      STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
 	/* Erase sector */
 	{OPT_ANY, {STATE_CMD_ERASE1, STATE_ADDR_SEC, STATE_CMD_ERASE2 | ACTION_SECERASE, STATE_READY}},
 	/* Read status */
 	{OPT_ANY, {STATE_CMD_STATUS, STATE_DATAOUT_STATUS, STATE_READY}},
-	/* Read multi-plane status */
-	{OPT_SMARTMEDIA, {STATE_CMD_STATUS_M, STATE_DATAOUT_STATUS_M, STATE_READY}},
 	/* Read ID */
 	{OPT_ANY, {STATE_CMD_READID, STATE_ADDR_ZERO, STATE_DATAOUT_ID, STATE_READY}},
 	/* Large page devices read page */
@@ -435,12 +443,122 @@ static LIST_HEAD(grave_pages);
 static unsigned long *erase_block_wear = NULL;
 static unsigned int wear_eb_count = 0;
 static unsigned long total_wear = 0;
-static unsigned int rptwear_cnt = 0;
 
 /* MTD structure for NAND controller */
 static struct mtd_info *nsmtd;
 
-static u_char ns_verify_buf[NS_LARGEST_PAGE_SIZE];
+static int nandsim_debugfs_show(struct seq_file *m, void *private)
+{
+	unsigned long wmin = -1, wmax = 0, avg;
+	unsigned long deciles[10], decile_max[10], tot = 0;
+	unsigned int i;
+
+	/* Calc wear stats */
+	for (i = 0; i < wear_eb_count; ++i) {
+		unsigned long wear = erase_block_wear[i];
+		if (wear < wmin)
+			wmin = wear;
+		if (wear > wmax)
+			wmax = wear;
+		tot += wear;
+	}
+
+	for (i = 0; i < 9; ++i) {
+		deciles[i] = 0;
+		decile_max[i] = (wmax * (i + 1) + 5) / 10;
+	}
+	deciles[9] = 0;
+	decile_max[9] = wmax;
+	for (i = 0; i < wear_eb_count; ++i) {
+		int d;
+		unsigned long wear = erase_block_wear[i];
+		for (d = 0; d < 10; ++d)
+			if (wear <= decile_max[d]) {
+				deciles[d] += 1;
+				break;
+			}
+	}
+	avg = tot / wear_eb_count;
+
+	/* Output wear report */
+	seq_printf(m, "Total numbers of erases:  %lu\n", tot);
+	seq_printf(m, "Number of erase blocks:   %u\n", wear_eb_count);
+	seq_printf(m, "Average number of erases: %lu\n", avg);
+	seq_printf(m, "Maximum number of erases: %lu\n", wmax);
+	seq_printf(m, "Minimum number of erases: %lu\n", wmin);
+	for (i = 0; i < 10; ++i) {
+		unsigned long from = (i ? decile_max[i - 1] + 1 : 0);
+		if (from > decile_max[i])
+			continue;
+		seq_printf(m, "Number of ebs with erase counts from %lu to %lu : %lu\n",
+			from,
+			decile_max[i],
+			deciles[i]);
+	}
+
+	return 0;
+}
+
+static int nandsim_debugfs_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, nandsim_debugfs_show, inode->i_private);
+}
+
+static const struct file_operations dfs_fops = {
+	.open		= nandsim_debugfs_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+/**
+ * nandsim_debugfs_create - initialize debugfs
+ * @dev: nandsim device description object
+ *
+ * This function creates all debugfs files for UBI device @ubi. Returns zero in
+ * case of success and a negative error code in case of failure.
+ */
+static int nandsim_debugfs_create(struct nandsim *dev)
+{
+	struct nandsim_debug_info *dbg = &dev->dbg;
+	struct dentry *dent;
+	int err;
+
+	if (!IS_ENABLED(CONFIG_DEBUG_FS))
+		return 0;
+
+	dent = debugfs_create_dir("nandsim", NULL);
+	if (IS_ERR_OR_NULL(dent)) {
+		int err = dent ? -ENODEV : PTR_ERR(dent);
+
+		NS_ERR("cannot create \"nandsim\" debugfs directory, err %d\n",
+			err);
+		return err;
+	}
+	dbg->dfs_root = dent;
+
+	dent = debugfs_create_file("wear_report", S_IRUSR,
+				   dbg->dfs_root, dev, &dfs_fops);
+	if (IS_ERR_OR_NULL(dent))
+		goto out_remove;
+	dbg->dfs_wear_report = dent;
+
+	return 0;
+
+out_remove:
+	debugfs_remove_recursive(dbg->dfs_root);
+	err = dent ? PTR_ERR(dent) : -ENODEV;
+	return err;
+}
+
+/**
+ * nandsim_debugfs_remove - destroy all debugfs files
+ */
+static void nandsim_debugfs_remove(struct nandsim *ns)
+{
+	if (IS_ENABLED(CONFIG_DEBUG_FS))
+		debugfs_remove_recursive(ns->dbg.dfs_root);
+}
 
 /*
  * Allocate array of page pointers, create slab allocation for an array
@@ -457,17 +575,18 @@ static int alloc_device(struct nandsim *ns)
 		cfile = filp_open(cache_file, O_CREAT | O_RDWR | O_LARGEFILE, 0600);
 		if (IS_ERR(cfile))
 			return PTR_ERR(cfile);
-		if (!cfile->f_op || (!cfile->f_op->read && !cfile->f_op->aio_read)) {
+		if (!(cfile->f_mode & FMODE_CAN_READ)) {
 			NS_ERR("alloc_device: cache file not readable\n");
 			err = -EINVAL;
 			goto err_close;
 		}
-		if (!cfile->f_op->write && !cfile->f_op->aio_write) {
+		if (!(cfile->f_mode & FMODE_CAN_WRITE)) {
 			NS_ERR("alloc_device: cache file not writeable\n");
 			err = -EINVAL;
 			goto err_close;
 		}
-		ns->pages_written = vmalloc(ns->geom.pgnum);
+		ns->pages_written = vzalloc(BITS_TO_LONGS(ns->geom.pgnum) *
+					    sizeof(unsigned long));
 		if (!ns->pages_written) {
 			NS_ERR("alloc_device: unable to allocate pages written array\n");
 			err = -ENOMEM;
@@ -480,7 +599,6 @@ static int alloc_device(struct nandsim *ns)
 			goto err_free;
 		}
 		ns->cfile = cfile;
-		memset(ns->pages_written, 0, ns->geom.pgnum);
 		return 0;
 	}
 
@@ -535,15 +653,7 @@ static void free_device(struct nandsim *ns)
 
 static char *get_partition_name(int i)
 {
-	char buf[64];
-	sprintf(buf, "NAND simulator partition %d", i);
-	return kstrdup(buf, GFP_KERNEL);
-}
-
-static uint64_t divide(uint64_t n, uint32_t d)
-{
-	do_div(n, d);
-	return n;
+	return kasprintf(GFP_KERNEL, "NAND simulator partition %d", i);
 }
 
 /*
@@ -553,8 +663,8 @@ static uint64_t divide(uint64_t n, uint32_t d)
  */
 static int init_nandsim(struct mtd_info *mtd)
 {
-	struct nand_chip *chip = (struct nand_chip *)mtd->priv;
-	struct nandsim   *ns   = (struct nandsim *)(chip->priv);
+	struct nand_chip *chip = mtd->priv;
+	struct nandsim   *ns   = chip->priv;
 	int i, ret = 0;
 	uint64_t remains;
 	uint64_t next_offset;
@@ -574,20 +684,16 @@ static int init_nandsim(struct mtd_info *mtd)
 	ns->geom.oobsz    = mtd->oobsize;
 	ns->geom.secsz    = mtd->erasesize;
 	ns->geom.pgszoob  = ns->geom.pgsz + ns->geom.oobsz;
-	ns->geom.pgnum    = divide(ns->geom.totsz, ns->geom.pgsz);
+	ns->geom.pgnum    = div_u64(ns->geom.totsz, ns->geom.pgsz);
 	ns->geom.totszoob = ns->geom.totsz + (uint64_t)ns->geom.pgnum * ns->geom.oobsz;
 	ns->geom.secshift = ffs(ns->geom.secsz) - 1;
 	ns->geom.pgshift  = chip->page_shift;
-	ns->geom.oobshift = ffs(ns->geom.oobsz) - 1;
 	ns->geom.pgsec    = ns->geom.secsz / ns->geom.pgsz;
 	ns->geom.secszoob = ns->geom.secsz + ns->geom.oobsz * ns->geom.pgsec;
 	ns->options = 0;
 
-	if (ns->geom.pgsz == 256) {
-		ns->options |= OPT_PAGE256;
-	}
-	else if (ns->geom.pgsz == 512) {
-		ns->options |= (OPT_PAGE512 | OPT_AUTOINCR);
+	if (ns->geom.pgsz == 512) {
+		ns->options |= OPT_PAGE512;
 		if (ns->busw == 8)
 			ns->options |= OPT_PAGE512_8BIT;
 	} else if (ns->geom.pgsz == 2048) {
@@ -652,14 +758,6 @@ static int init_nandsim(struct mtd_info *mtd)
 		ns->nbparts += 1;
 	}
 
-	/* Detect how many ID bytes the NAND chip outputs */
-        for (i = 0; nand_flash_ids[i].name != NULL; i++) {
-                if (second_id_byte != nand_flash_ids[i].id)
-                        continue;
-		if (!(nand_flash_ids[i].options & NAND_NO_AUTOINCR))
-			ns->options |= OPT_AUTOINCR;
-	}
-
 	if (ns->busw == 16)
 		NS_WARN("16-bit flashes support wasn't tested\n");
 
@@ -673,7 +771,7 @@ static int init_nandsim(struct mtd_info *mtd)
 	printk("bus width: %u\n",               ns->busw);
 	printk("bits in sector size: %u\n",     ns->geom.secshift);
 	printk("bits in page size: %u\n",       ns->geom.pgshift);
-	printk("bits in OOB size: %u\n",	ns->geom.oobshift);
+	printk("bits in OOB size: %u\n",	ffs(ns->geom.oobsz) - 1);
 	printk("flash size with OOB: %llu KiB\n",
 			(unsigned long long)ns->geom.totszoob >> 10);
 	printk("page address bytes: %u\n",      ns->geom.pgaddrbytes);
@@ -730,7 +828,7 @@ static int parse_badblocks(struct nandsim *ns, struct mtd_info *mtd)
 			return -EINVAL;
 		}
 		offset = erase_block_no * ns->geom.secsz;
-		if (mtd->block_markbad(mtd, offset)) {
+		if (mtd_block_markbad(mtd, offset)) {
 			NS_ERR("invalid badblocks.\n");
 			return -EINVAL;
 		}
@@ -915,9 +1013,7 @@ static int setup_wear_reporting(struct mtd_info *mtd)
 {
 	size_t mem;
 
-	if (!rptwear)
-		return 0;
-	wear_eb_count = divide(mtd->size, mtd->erasesize);
+	wear_eb_count = div_u64(mtd->size, mtd->erasesize);
 	mem = wear_eb_count * sizeof(unsigned long);
 	if (mem / sizeof(unsigned long) != wear_eb_count) {
 		NS_ERR("Too many erase blocks for wear reporting\n");
@@ -933,64 +1029,18 @@ static int setup_wear_reporting(struct mtd_info *mtd)
 
 static void update_wear(unsigned int erase_block_no)
 {
-	unsigned long wmin = -1, wmax = 0, avg;
-	unsigned long deciles[10], decile_max[10], tot = 0;
-	unsigned int i;
-
 	if (!erase_block_wear)
 		return;
 	total_wear += 1;
+	/*
+	 * TODO: Notify this through a debugfs entry,
+	 * instead of showing an error message.
+	 */
 	if (total_wear == 0)
 		NS_ERR("Erase counter total overflow\n");
 	erase_block_wear[erase_block_no] += 1;
 	if (erase_block_wear[erase_block_no] == 0)
 		NS_ERR("Erase counter overflow for erase block %u\n", erase_block_no);
-	rptwear_cnt += 1;
-	if (rptwear_cnt < rptwear)
-		return;
-	rptwear_cnt = 0;
-	/* Calc wear stats */
-	for (i = 0; i < wear_eb_count; ++i) {
-		unsigned long wear = erase_block_wear[i];
-		if (wear < wmin)
-			wmin = wear;
-		if (wear > wmax)
-			wmax = wear;
-		tot += wear;
-	}
-	for (i = 0; i < 9; ++i) {
-		deciles[i] = 0;
-		decile_max[i] = (wmax * (i + 1) + 5) / 10;
-	}
-	deciles[9] = 0;
-	decile_max[9] = wmax;
-	for (i = 0; i < wear_eb_count; ++i) {
-		int d;
-		unsigned long wear = erase_block_wear[i];
-		for (d = 0; d < 10; ++d)
-			if (wear <= decile_max[d]) {
-				deciles[d] += 1;
-				break;
-			}
-	}
-	avg = tot / wear_eb_count;
-	/* Output wear report */
-	NS_INFO("*** Wear Report ***\n");
-	NS_INFO("Total numbers of erases:  %lu\n", tot);
-	NS_INFO("Number of erase blocks:   %u\n", wear_eb_count);
-	NS_INFO("Average number of erases: %lu\n", avg);
-	NS_INFO("Maximum number of erases: %lu\n", wmax);
-	NS_INFO("Minimum number of erases: %lu\n", wmin);
-	for (i = 0; i < 10; ++i) {
-		unsigned long from = (i ? decile_max[i - 1] + 1 : 0);
-		if (from > decile_max[i])
-			continue;
-		NS_INFO("Number of ebs with erase counts from %lu to %lu : %lu\n",
-			from,
-			decile_max[i],
-			deciles[i]);
-	}
-	NS_INFO("*** End of Wear Report ***\n");
 }
 
 /*
@@ -1013,8 +1063,6 @@ static char *get_state_name(uint32_t state)
 			return "STATE_CMD_ERASE1";
 		case STATE_CMD_STATUS:
 			return "STATE_CMD_STATUS";
-		case STATE_CMD_STATUS_M:
-			return "STATE_CMD_STATUS_M";
 		case STATE_CMD_SEQIN:
 			return "STATE_CMD_SEQIN";
 		case STATE_CMD_READID:
@@ -1079,7 +1127,6 @@ static int check_command(int cmd)
 	case NAND_CMD_RNDOUTSTART:
 		return 0;
 
-	case NAND_CMD_STATUS_MULTI:
 	default:
 		return 1;
 	}
@@ -1105,8 +1152,6 @@ static uint32_t get_state_by_command(unsigned command)
 			return STATE_CMD_ERASE1;
 		case NAND_CMD_STATUS:
 			return STATE_CMD_STATUS;
-		case NAND_CMD_STATUS_MULTI:
-			return STATE_CMD_STATUS_M;
 		case NAND_CMD_SEQIN:
 			return STATE_CMD_SEQIN;
 		case NAND_CMD_READID:
@@ -1168,9 +1213,9 @@ static inline void switch_to_ready_state(struct nandsim *ns, u_char status)
  * of supported operations.
  *
  * Operation can be unknown because of the following.
- *   1. New command was accepted and this is the firs call to find the
+ *   1. New command was accepted and this is the first call to find the
  *      correspondent states chain. In this case ns->npstates = 0;
- *   2. There is several operations which begin with the same command(s)
+ *   2. There are several operations which begin with the same command(s)
  *      (for example program from the second half and read from the
  *      second half operations both begin with the READ1 command). In this
  *      case the ns->pstates[] array contains previous states.
@@ -1183,7 +1228,7 @@ static inline void switch_to_ready_state(struct nandsim *ns, u_char status)
  * ns->ops, ns->state, ns->nxstate are initialized, ns->npstate is
  * zeroed).
  *
- * If there are several maches, the current state is pushed to the
+ * If there are several matches, the current state is pushed to the
  * ns->pstates.
  *
  * The operation can be unknown only while commands are input to the chip.
@@ -1192,10 +1237,10 @@ static inline void switch_to_ready_state(struct nandsim *ns, u_char status)
  * operation is searched using the following pattern:
  *     ns->pstates[0], ... ns->pstates[ns->npstates], <address input>
  *
- * It is supposed that this pattern must either match one operation on
+ * It is supposed that this pattern must either match one operation or
  * none. There can't be ambiguity in that case.
  *
- * If no matches found, the functions does the following:
+ * If no matches found, the function does the following:
  *   1. if there are saved states present, try to ignore them and search
  *      again only using the last command. If nothing was found, switch
  *      to the STATE_READY state.
@@ -1342,40 +1387,32 @@ static void clear_memalloc(int memalloc)
 		current->flags &= ~PF_MEMALLOC;
 }
 
-static ssize_t read_file(struct nandsim *ns, struct file *file, void *buf, size_t count, loff_t *pos)
+static ssize_t read_file(struct nandsim *ns, struct file *file, void *buf, size_t count, loff_t pos)
 {
-	mm_segment_t old_fs;
 	ssize_t tx;
 	int err, memalloc;
 
-	err = get_pages(ns, file, count, *pos);
+	err = get_pages(ns, file, count, pos);
 	if (err)
 		return err;
-	old_fs = get_fs();
-	set_fs(get_ds());
 	memalloc = set_memalloc();
-	tx = vfs_read(file, (char __user *)buf, count, pos);
+	tx = kernel_read(file, pos, buf, count);
 	clear_memalloc(memalloc);
-	set_fs(old_fs);
 	put_pages(ns);
 	return tx;
 }
 
-static ssize_t write_file(struct nandsim *ns, struct file *file, void *buf, size_t count, loff_t *pos)
+static ssize_t write_file(struct nandsim *ns, struct file *file, void *buf, size_t count, loff_t pos)
 {
-	mm_segment_t old_fs;
 	ssize_t tx;
 	int err, memalloc;
 
-	err = get_pages(ns, file, count, *pos);
+	err = get_pages(ns, file, count, pos);
 	if (err)
 		return err;
-	old_fs = get_fs();
-	set_fs(get_ds());
 	memalloc = set_memalloc();
-	tx = vfs_write(file, (char __user *)buf, count, pos);
+	tx = kernel_write(file, buf, count, pos);
 	clear_memalloc(memalloc);
-	set_fs(old_fs);
 	put_pages(ns);
 	return tx;
 }
@@ -1396,29 +1433,26 @@ static inline u_char *NS_PAGE_BYTE_OFF(struct nandsim *ns)
 	return NS_GET_PAGE(ns)->byte + ns->regs.column + ns->regs.off;
 }
 
-int do_read_error(struct nandsim *ns, int num)
+static int do_read_error(struct nandsim *ns, int num)
 {
 	unsigned int page_no = ns->regs.row;
 
 	if (read_error(page_no)) {
-		int i;
-		memset(ns->buf.byte, 0xFF, num);
-		for (i = 0; i < num; ++i)
-			ns->buf.byte[i] = random32();
+		prandom_bytes(ns->buf.byte, num);
 		NS_WARN("simulating read error in page %u\n", page_no);
 		return 1;
 	}
 	return 0;
 }
 
-void do_bit_flips(struct nandsim *ns, int num)
+static void do_bit_flips(struct nandsim *ns, int num)
 {
-	if (bitflips && random32() < (1 << 22)) {
+	if (bitflips && prandom_u32() < (1 << 22)) {
 		int flips = 1;
 		if (bitflips > 1)
-			flips = (random32() % (int) bitflips) + 1;
+			flips = (prandom_u32() % (int) bitflips) + 1;
 		while (flips--) {
-			int pos = random32() % (num * 8);
+			int pos = prandom_u32() % (num * 8);
 			ns->buf.byte[pos / 8] ^= (1 << (pos % 8));
 			NS_WARN("read_page: flipping bit %d in page %d "
 				"reading from %d ecc: corrected=%u failed=%u\n",
@@ -1436,7 +1470,7 @@ static void read_page(struct nandsim *ns, int num)
 	union ns_mem *mypage;
 
 	if (ns->cfile) {
-		if (!ns->pages_written[ns->regs.row]) {
+		if (!test_bit(ns->regs.row, ns->pages_written)) {
 			NS_DBG("read_page: page %d not written\n", ns->regs.row);
 			memset(ns->buf.byte, 0xFF, num);
 		} else {
@@ -1447,8 +1481,8 @@ static void read_page(struct nandsim *ns, int num)
 				ns->regs.row, ns->regs.column + ns->regs.off);
 			if (do_read_error(ns, num))
 				return;
-			pos = (loff_t)ns->regs.row * ns->geom.pgszoob + ns->regs.column + ns->regs.off;
-			tx = read_file(ns, ns->cfile, ns->buf.byte, num, &pos);
+			pos = (loff_t)NS_RAW_OFFSET(ns) + ns->regs.off;
+			tx = read_file(ns, ns->cfile, ns->buf.byte, num, pos);
 			if (tx != num) {
 				NS_ERR("read_page: read error for page %d ret %ld\n", ns->regs.row, (long)tx);
 				return;
@@ -1482,9 +1516,9 @@ static void erase_sector(struct nandsim *ns)
 
 	if (ns->cfile) {
 		for (i = 0; i < ns->geom.pgsec; i++)
-			if (ns->pages_written[ns->regs.row + i]) {
+			if (__test_and_clear_bit(ns->regs.row + i,
+						 ns->pages_written)) {
 				NS_DBG("erase_sector: freeing page %d\n", ns->regs.row + i);
-				ns->pages_written[ns->regs.row + i] = 0;
 			}
 		return;
 	}
@@ -1510,20 +1544,19 @@ static int prog_page(struct nandsim *ns, int num)
 	u_char *pg_off;
 
 	if (ns->cfile) {
-		loff_t off, pos;
+		loff_t off;
 		ssize_t tx;
 		int all;
 
 		NS_DBG("prog_page: writing page %d\n", ns->regs.row);
 		pg_off = ns->file_buf + ns->regs.column + ns->regs.off;
-		off = (loff_t)ns->regs.row * ns->geom.pgszoob + ns->regs.column + ns->regs.off;
-		if (!ns->pages_written[ns->regs.row]) {
+		off = (loff_t)NS_RAW_OFFSET(ns) + ns->regs.off;
+		if (!test_bit(ns->regs.row, ns->pages_written)) {
 			all = 1;
 			memset(ns->file_buf, 0xff, ns->geom.pgszoob);
 		} else {
 			all = 0;
-			pos = off;
-			tx = read_file(ns, ns->cfile, pg_off, num, &pos);
+			tx = read_file(ns, ns->cfile, pg_off, num, off);
 			if (tx != num) {
 				NS_ERR("prog_page: read error for page %d ret %ld\n", ns->regs.row, (long)tx);
 				return -1;
@@ -1532,16 +1565,15 @@ static int prog_page(struct nandsim *ns, int num)
 		for (i = 0; i < num; i++)
 			pg_off[i] &= ns->buf.byte[i];
 		if (all) {
-			pos = (loff_t)ns->regs.row * ns->geom.pgszoob;
-			tx = write_file(ns, ns->cfile, ns->file_buf, ns->geom.pgszoob, &pos);
+			loff_t pos = (loff_t)ns->regs.row * ns->geom.pgszoob;
+			tx = write_file(ns, ns->cfile, ns->file_buf, ns->geom.pgszoob, pos);
 			if (tx != ns->geom.pgszoob) {
 				NS_ERR("prog_page: write error for page %d ret %ld\n", ns->regs.row, (long)tx);
 				return -1;
 			}
-			ns->pages_written[ns->regs.row] = 1;
+			__set_bit(ns->regs.row, ns->pages_written);
 		} else {
-			pos = off;
-			tx = write_file(ns, ns->cfile, pg_off, num, &pos);
+			tx = write_file(ns, ns->cfile, pg_off, num, off);
 			if (tx != num) {
 				NS_ERR("prog_page: write error for page %d ret %ld\n", ns->regs.row, (long)tx);
 				return -1;
@@ -1665,7 +1697,7 @@ static int do_state_action(struct nandsim *ns, uint32_t action)
 
 	case ACTION_PRGPAGE:
 		/*
-		 * Programm page - move internal buffer data to the page.
+		 * Program page - move internal buffer data to the page.
 		 */
 
 		if (ns->lines.wp) {
@@ -1877,7 +1909,7 @@ static void switch_state(struct nandsim *ns)
 
 static u_char ns_nand_read_byte(struct mtd_info *mtd)
 {
-        struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
+	struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
 	u_char outb = 0x00;
 
 	/* Sanity and correctness checks */
@@ -1929,20 +1961,8 @@ static u_char ns_nand_read_byte(struct mtd_info *mtd)
 	if (ns->regs.count == ns->regs.num) {
 		NS_DBG("read_byte: all bytes were read\n");
 
-		/*
-		 * The OPT_AUTOINCR allows to read next conseqitive pages without
-		 * new read operation cycle.
-		 */
-		if ((ns->options & OPT_AUTOINCR) && NS_STATE(ns->state) == STATE_DATAOUT) {
-			ns->regs.count = 0;
-			if (ns->regs.row + 1 < ns->geom.pgnum)
-				ns->regs.row += 1;
-			NS_DBG("read_byte: switch to the next page (%#x)\n", ns->regs.row);
-			do_state_action(ns, ACTION_CPY);
-		}
-		else if (NS_STATE(ns->nxstate) == STATE_READY)
+		if (NS_STATE(ns->nxstate) == STATE_READY)
 			switch_state(ns);
-
 	}
 
 	return outb;
@@ -1950,7 +1970,7 @@ static u_char ns_nand_read_byte(struct mtd_info *mtd)
 
 static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte)
 {
-        struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
+	struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
 
 	/* Sanity and correctness checks */
 	if (!ns->lines.ce) {
@@ -2132,7 +2152,7 @@ static uint16_t ns_nand_read_word(struct mtd_info *mtd)
 
 static void ns_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
 {
-        struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
+	struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
 
 	/* Check that chip is expecting data input */
 	if (!(ns->state & STATE_DATAIN_MASK)) {
@@ -2159,7 +2179,7 @@ static void ns_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
 
 static void ns_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 {
-        struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
+	struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
 
 	/* Sanity and correctness checks */
 	if (!ns->lines.ce) {
@@ -2196,33 +2216,13 @@ static void ns_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 	ns->regs.count += len;
 
 	if (ns->regs.count == ns->regs.num) {
-		if ((ns->options & OPT_AUTOINCR) && NS_STATE(ns->state) == STATE_DATAOUT) {
-			ns->regs.count = 0;
-			if (ns->regs.row + 1 < ns->geom.pgnum)
-				ns->regs.row += 1;
-			NS_DBG("read_buf: switch to the next page (%#x)\n", ns->regs.row);
-			do_state_action(ns, ACTION_CPY);
-		}
-		else if (NS_STATE(ns->nxstate) == STATE_READY)
+		if (NS_STATE(ns->nxstate) == STATE_READY)
 			switch_state(ns);
 	}
 
 	return;
 }
 
-static int ns_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
-{
-	ns_nand_read_buf(mtd, (u_char *)&ns_verify_buf[0], len);
-
-	if (!memcmp(buf, &ns_verify_buf[0], len)) {
-		NS_DBG("verify_buf: the buffer is OK\n");
-		return 0;
-	} else {
-		NS_DBG("verify_buf: the buffer is wrong\n");
-		return -EFAULT;
-	}
-}
-
 /*
  * Module initialization function
  */
@@ -2257,13 +2257,24 @@ static int __init ns_init_module(void)
 	chip->dev_ready  = ns_device_ready;
 	chip->write_buf  = ns_nand_write_buf;
 	chip->read_buf   = ns_nand_read_buf;
-	chip->verify_buf = ns_nand_verify_buf;
 	chip->read_word  = ns_nand_read_word;
 	chip->ecc.mode   = NAND_ECC_SOFT;
 	/* The NAND_SKIP_BBTSCAN option is necessary for 'overridesize' */
 	/* and 'badblocks' parameters to work */
 	chip->options   |= NAND_SKIP_BBTSCAN;
 
+	switch (bbt) {
+	case 2:
+		 chip->bbt_options |= NAND_BBT_NO_OOB;
+	case 1:
+		 chip->bbt_options |= NAND_BBT_USE_FLASH;
+	case 0:
+		break;
+	default:
+		NS_ERR("bbt has to be 0..2\n");
+		retval = -EINVAL;
+		goto error;
+	}
 	/*
 	 * Perform minimum nandsim structure initialization to handle
 	 * the initial ID read command correctly
@@ -2274,7 +2285,7 @@ static int __init ns_init_module(void)
 		nand->geom.idbytes = 2;
 	nand->regs.status = NS_STATUS_OK(nand);
 	nand->nxstate = STATE_UNKNOWN;
-	nand->options |= OPT_PAGE256; /* temporary value */
+	nand->options |= OPT_PAGE512; /* temporary value */
 	nand->ids[0] = first_id_byte;
 	nand->ids[1] = second_id_byte;
 	nand->ids[2] = third_id_byte;
@@ -2295,7 +2306,43 @@ static int __init ns_init_module(void)
 	if ((retval = parse_gravepages()) != 0)
 		goto error;
 
-	if ((retval = nand_scan(nsmtd, 1)) != 0) {
+	retval = nand_scan_ident(nsmtd, 1, NULL);
+	if (retval) {
+		NS_ERR("cannot scan NAND Simulator device\n");
+		if (retval > 0)
+			retval = -ENXIO;
+		goto error;
+	}
+
+	if (bch) {
+		unsigned int eccsteps, eccbytes;
+		if (!mtd_nand_has_bch()) {
+			NS_ERR("BCH ECC support is disabled\n");
+			retval = -EINVAL;
+			goto error;
+		}
+		/* use 512-byte ecc blocks */
+		eccsteps = nsmtd->writesize/512;
+		eccbytes = (bch*13+7)/8;
+		/* do not bother supporting small page devices */
+		if ((nsmtd->oobsize < 64) || !eccsteps) {
+			NS_ERR("bch not available on small page devices\n");
+			retval = -EINVAL;
+			goto error;
+		}
+		if ((eccbytes*eccsteps+2) > nsmtd->oobsize) {
+			NS_ERR("invalid bch value %u\n", bch);
+			retval = -EINVAL;
+			goto error;
+		}
+		chip->ecc.mode = NAND_ECC_SOFT_BCH;
+		chip->ecc.size = 512;
+		chip->ecc.bytes = eccbytes;
+		NS_INFO("using %u-bit/%u bytes BCH ECC\n", bch, chip->ecc.size);
+	}
+
+	retval = nand_scan_tail(nsmtd);
+	if (retval) {
 		NS_ERR("can't register NAND Simulator\n");
 		if (retval > 0)
 			retval = -ENXIO;
@@ -2306,6 +2353,7 @@ static int __init ns_init_module(void)
 		uint64_t new_size = (uint64_t)nsmtd->erasesize << overridesize;
 		if (new_size >> overridesize != nsmtd->erasesize) {
 			NS_ERR("overridesize is too big\n");
+			retval = -EINVAL;
 			goto err_exit;
 		}
 		/* N.B. This relies on nand_scan not doing anything with the size before we change it */
@@ -2318,17 +2366,22 @@ static int __init ns_init_module(void)
 	if ((retval = setup_wear_reporting(nsmtd)) != 0)
 		goto err_exit;
 
+	if ((retval = nandsim_debugfs_create(nand)) != 0)
+		goto err_exit;
+
 	if ((retval = init_nandsim(nsmtd)) != 0)
 		goto err_exit;
 
-	if ((retval = parse_badblocks(nand, nsmtd)) != 0)
+	if ((retval = chip->scan_bbt(nsmtd)) != 0)
 		goto err_exit;
 
-	if ((retval = nand_default_bbt(nsmtd)) != 0)
+	if ((retval = parse_badblocks(nand, nsmtd)) != 0)
 		goto err_exit;
 
 	/* Register NAND partitions */
-	if ((retval = add_mtd_partitions(nsmtd, &nand->partitions[0], nand->nbparts)) != 0)
+	retval = mtd_device_register(nsmtd, &nand->partitions[0],
+				     nand->nbparts);
+	if (retval != 0)
 		goto err_exit;
 
         return 0;
@@ -2352,9 +2405,10 @@ module_init(ns_init_module);
  */
 static void __exit ns_cleanup_module(void)
 {
-	struct nandsim *ns = (struct nandsim *)(((struct nand_chip *)nsmtd->priv)->priv);
+	struct nandsim *ns = ((struct nand_chip *)nsmtd->priv)->priv;
 	int i;
 
+	nandsim_debugfs_remove(ns);
 	free_nandsim(ns);    /* Free nandsim private resources */
 	nand_release(nsmtd); /* Unregister driver */
 	for (i = 0;i < ARRAY_SIZE(ns->partitions); ++i)
diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c
index 98fd2bdf8be..69eaba690a9 100644
--- a/drivers/mtd/nand/ndfc.c
+++ b/drivers/mtd/nand/ndfc.c
@@ -30,28 +30,28 @@
 #include <linux/mtd/ndfc.h>
 #include <linux/slab.h>
 #include <linux/mtd/mtd.h>
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <asm/io.h>
 
+#define NDFC_MAX_CS    4
 
 struct ndfc_controller {
-	struct of_device *ofdev;
+	struct platform_device *ofdev;
 	void __iomem *ndfcbase;
 	struct mtd_info mtd;
 	struct nand_chip chip;
 	int chip_select;
 	struct nand_hw_control ndfc_control;
-#ifdef CONFIG_MTD_PARTITIONS
-	struct mtd_partition *parts;
-#endif
 };
 
-static struct ndfc_controller ndfc_ctrl;
+static struct ndfc_controller ndfc_ctrl[NDFC_MAX_CS];
 
 static void ndfc_select_chip(struct mtd_info *mtd, int chip)
 {
 	uint32_t ccr;
-	struct ndfc_controller *ndfc = &ndfc_ctrl;
+	struct nand_chip *nchip = mtd->priv;
+	struct ndfc_controller *ndfc = nchip->priv;
 
 	ccr = in_be32(ndfc->ndfcbase + NDFC_CCR);
 	if (chip >= 0) {
@@ -64,7 +64,8 @@ static void ndfc_select_chip(struct mtd_info *mtd, int chip)
 
 static void ndfc_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
-	struct ndfc_controller *ndfc = &ndfc_ctrl;
+	struct nand_chip *chip = mtd->priv;
+	struct ndfc_controller *ndfc = chip->priv;
 
 	if (cmd == NAND_CMD_NONE)
 		return;
@@ -77,7 +78,8 @@ static void ndfc_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 
 static int ndfc_ready(struct mtd_info *mtd)
 {
-	struct ndfc_controller *ndfc = &ndfc_ctrl;
+	struct nand_chip *chip = mtd->priv;
+	struct ndfc_controller *ndfc = chip->priv;
 
 	return in_be32(ndfc->ndfcbase + NDFC_STAT) & NDFC_STAT_IS_READY;
 }
@@ -85,7 +87,8 @@ static int ndfc_ready(struct mtd_info *mtd)
 static void ndfc_enable_hwecc(struct mtd_info *mtd, int mode)
 {
 	uint32_t ccr;
-	struct ndfc_controller *ndfc = &ndfc_ctrl;
+	struct nand_chip *chip = mtd->priv;
+	struct ndfc_controller *ndfc = chip->priv;
 
 	ccr = in_be32(ndfc->ndfcbase + NDFC_CCR);
 	ccr |= NDFC_CCR_RESET_ECC;
@@ -96,7 +99,8 @@ static void ndfc_enable_hwecc(struct mtd_info *mtd, int mode)
 static int ndfc_calculate_ecc(struct mtd_info *mtd,
 			      const u_char *dat, u_char *ecc_code)
 {
-	struct ndfc_controller *ndfc = &ndfc_ctrl;
+	struct nand_chip *chip = mtd->priv;
+	struct ndfc_controller *ndfc = chip->priv;
 	uint32_t ecc;
 	uint8_t *p = (uint8_t *)&ecc;
 
@@ -119,7 +123,8 @@ static int ndfc_calculate_ecc(struct mtd_info *mtd,
  */
 static void ndfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
 {
-	struct ndfc_controller *ndfc = &ndfc_ctrl;
+	struct nand_chip *chip = mtd->priv;
+	struct ndfc_controller *ndfc = chip->priv;
 	uint32_t *p = (uint32_t *) buf;
 
 	for(;len > 0; len -= 4)
@@ -128,39 +133,23 @@ static void ndfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
 
 static void ndfc_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
 {
-	struct ndfc_controller *ndfc = &ndfc_ctrl;
+	struct nand_chip *chip = mtd->priv;
+	struct ndfc_controller *ndfc = chip->priv;
 	uint32_t *p = (uint32_t *) buf;
 
 	for(;len > 0; len -= 4)
 		out_be32(ndfc->ndfcbase + NDFC_DATA, *p++);
 }
 
-static int ndfc_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
-{
-	struct ndfc_controller *ndfc = &ndfc_ctrl;
-	uint32_t *p = (uint32_t *) buf;
-
-	for(;len > 0; len -= 4)
-		if (*p++ != in_be32(ndfc->ndfcbase + NDFC_DATA))
-			return -EFAULT;
-	return 0;
-}
-
 /*
  * Initialize chip structure
  */
 static int ndfc_chip_init(struct ndfc_controller *ndfc,
 			  struct device_node *node)
 {
-#ifdef CONFIG_MTD_PARTITIONS
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-	static const char *part_types[] = { "cmdlinepart", NULL };
-#else
-	static const char *part_types[] = { NULL };
-#endif
-#endif
 	struct device_node *flash_np;
 	struct nand_chip *chip = &ndfc->chip;
+	struct mtd_part_parser_data ppdata;
 	int ret;
 
 	chip->IO_ADDR_R = ndfc->ndfcbase + NDFC_DATA;
@@ -172,13 +161,14 @@ static int ndfc_chip_init(struct ndfc_controller *ndfc,
 	chip->controller = &ndfc->ndfc_control;
 	chip->read_buf = ndfc_read_buf;
 	chip->write_buf = ndfc_write_buf;
-	chip->verify_buf = ndfc_verify_buf;
 	chip->ecc.correct = nand_correct_data;
 	chip->ecc.hwctl = ndfc_enable_hwecc;
 	chip->ecc.calculate = ndfc_calculate_ecc;
 	chip->ecc.mode = NAND_ECC_HW;
 	chip->ecc.size = 256;
 	chip->ecc.bytes = 3;
+	chip->ecc.strength = 1;
+	chip->priv = ndfc;
 
 	ndfc->mtd.priv = chip;
 	ndfc->mtd.owner = THIS_MODULE;
@@ -187,6 +177,7 @@ static int ndfc_chip_init(struct ndfc_controller *ndfc,
 	if (!flash_np)
 		return -ENODEV;
 
+	ppdata.of_node = flash_np;
 	ndfc->mtd.name = kasprintf(GFP_KERNEL, "%s.%s",
 			dev_name(&ndfc->ofdev->dev), flash_np->name);
 	if (!ndfc->mtd.name) {
@@ -198,25 +189,7 @@ static int ndfc_chip_init(struct ndfc_controller *ndfc,
 	if (ret)
 		goto err;
 
-#ifdef CONFIG_MTD_PARTITIONS
-	ret = parse_mtd_partitions(&ndfc->mtd, part_types, &ndfc->parts, 0);
-	if (ret < 0)
-		goto err;
-
-#ifdef CONFIG_MTD_OF_PARTS
-	if (ret == 0) {
-		ret = of_mtd_parse_partitions(&ndfc->ofdev->dev, flash_np,
-					      &ndfc->parts);
-		if (ret < 0)
-			goto err;
-	}
-#endif
-
-	if (ret > 0)
-		ret = add_mtd_partitions(&ndfc->mtd, ndfc->parts, ret);
-	else
-#endif
-		ret = add_mtd_device(&ndfc->mtd);
+	ret = mtd_device_parse_register(&ndfc->mtd, NULL, &ppdata, NULL, 0);
 
 err:
 	of_node_put(flash_np);
@@ -225,18 +198,12 @@ err:
 	return ret;
 }
 
-static int __devinit ndfc_probe(struct of_device *ofdev,
-				const struct of_device_id *match)
+static int ndfc_probe(struct platform_device *ofdev)
 {
-	struct ndfc_controller *ndfc = &ndfc_ctrl;
-	const u32 *reg;
+	struct ndfc_controller *ndfc;
+	const __be32 *reg;
 	u32 ccr;
-	int err, len;
-
-	spin_lock_init(&ndfc->ndfc_control.lock);
-	init_waitqueue_head(&ndfc->ndfc_control.wq);
-	ndfc->ofdev = ofdev;
-	dev_set_drvdata(&ofdev->dev, ndfc);
+	int err, len, cs;
 
 	/* Read the reg property to get the chip select */
 	reg = of_get_property(ofdev->dev.of_node, "reg", &len);
@@ -244,7 +211,20 @@ static int __devinit ndfc_probe(struct of_device *ofdev,
 		dev_err(&ofdev->dev, "unable read reg property (%d)\n", len);
 		return -ENOENT;
 	}
-	ndfc->chip_select = reg[0];
+
+	cs = be32_to_cpu(reg[0]);
+	if (cs >= NDFC_MAX_CS) {
+		dev_err(&ofdev->dev, "invalid CS number (%d)\n", cs);
+		return -EINVAL;
+	}
+
+	ndfc = &ndfc_ctrl[cs];
+	ndfc->chip_select = cs;
+
+	spin_lock_init(&ndfc->ndfc_control.lock);
+	init_waitqueue_head(&ndfc->ndfc_control.wq);
+	ndfc->ofdev = ofdev;
+	dev_set_drvdata(&ofdev->dev, ndfc);
 
 	ndfc->ndfcbase = of_iomap(ofdev->dev.of_node, 0);
 	if (!ndfc->ndfcbase) {
@@ -257,7 +237,7 @@ static int __devinit ndfc_probe(struct of_device *ofdev,
 	/* It is ok if ccr does not exist - just default to 0 */
 	reg = of_get_property(ofdev->dev.of_node, "ccr", NULL);
 	if (reg)
-		ccr |= *reg;
+		ccr |= be32_to_cpup(reg);
 
 	out_be32(ndfc->ndfcbase + NDFC_CCR, ccr);
 
@@ -265,7 +245,7 @@ static int __devinit ndfc_probe(struct of_device *ofdev,
 	reg = of_get_property(ofdev->dev.of_node, "bank-settings", NULL);
 	if (reg) {
 		int offset = NDFC_BCFG0 + (ndfc->chip_select << 2);
-		out_be32(ndfc->ndfcbase + offset, *reg);
+		out_be32(ndfc->ndfcbase + offset, be32_to_cpup(reg));
 	}
 
 	err = ndfc_chip_init(ndfc, ofdev->dev.of_node);
@@ -277,11 +257,12 @@ static int __devinit ndfc_probe(struct of_device *ofdev,
 	return 0;
 }
 
-static int __devexit ndfc_remove(struct of_device *ofdev)
+static int ndfc_remove(struct platform_device *ofdev)
 {
 	struct ndfc_controller *ndfc = dev_get_drvdata(&ofdev->dev);
 
 	nand_release(&ndfc->mtd);
+	kfree(ndfc->mtd.name);
 
 	return 0;
 }
@@ -292,28 +273,17 @@ static const struct of_device_id ndfc_match[] = {
 };
 MODULE_DEVICE_TABLE(of, ndfc_match);
 
-static struct of_platform_driver ndfc_driver = {
+static struct platform_driver ndfc_driver = {
 	.driver = {
 		.name = "ndfc",
 		.owner = THIS_MODULE,
 		.of_match_table = ndfc_match,
 	},
 	.probe = ndfc_probe,
-	.remove = __devexit_p(ndfc_remove),
+	.remove = ndfc_remove,
 };
 
-static int __init ndfc_nand_init(void)
-{
-	return of_register_platform_driver(&ndfc_driver);
-}
-
-static void __exit ndfc_nand_exit(void)
-{
-	of_unregister_platform_driver(&ndfc_driver);
-}
-
-module_init(ndfc_nand_init);
-module_exit(ndfc_nand_exit);
+module_platform_driver(ndfc_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Thomas Gleixner <tglx@linutronix.de>");
diff --git a/drivers/mtd/nand/nomadik_nand.c b/drivers/mtd/nand/nomadik_nand.c
deleted file mode 100644
index 8c0b6937522..00000000000
--- a/drivers/mtd/nand/nomadik_nand.c
+++ /dev/null
@@ -1,251 +0,0 @@
-/*
- *  drivers/mtd/nand/nomadik_nand.c
- *
- *  Overview:
- *  	Driver for on-board NAND flash on Nomadik Platforms
- *
- * Copyright © 2007 STMicroelectronics Pvt. Ltd.
- * Author: Sachin Verma <sachin.verma@st.com>
- *
- * Copyright © 2009 Alessandro Rubini
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <mach/nand.h>
-#include <mach/fsmc.h>
-
-#include <mtd/mtd-abi.h>
-
-struct nomadik_nand_host {
-	struct mtd_info		mtd;
-	struct nand_chip	nand;
-	void __iomem *data_va;
-	void __iomem *cmd_va;
-	void __iomem *addr_va;
-	struct nand_bbt_descr *bbt_desc;
-};
-
-static struct nand_ecclayout nomadik_ecc_layout = {
-	.eccbytes = 3 * 4,
-	.eccpos = { /* each subpage has 16 bytes: pos 2,3,4 hosts ECC */
-		0x02, 0x03, 0x04,
-		0x12, 0x13, 0x14,
-		0x22, 0x23, 0x24,
-		0x32, 0x33, 0x34},
-	/* let's keep bytes 5,6,7 for us, just in case we change ECC algo */
-	.oobfree = { {0x08, 0x08}, {0x18, 0x08}, {0x28, 0x08}, {0x38, 0x08} },
-};
-
-static void nomadik_ecc_control(struct mtd_info *mtd, int mode)
-{
-	/* No need to enable hw ecc, it's on by default */
-}
-
-static void nomadik_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
-	struct nand_chip *nand = mtd->priv;
-	struct nomadik_nand_host *host = nand->priv;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	if (ctrl & NAND_CLE)
-		writeb(cmd, host->cmd_va);
-	else
-		writeb(cmd, host->addr_va);
-}
-
-static int nomadik_nand_probe(struct platform_device *pdev)
-{
-	struct nomadik_nand_platform_data *pdata = pdev->dev.platform_data;
-	struct nomadik_nand_host *host;
-	struct mtd_info *mtd;
-	struct nand_chip *nand;
-	struct resource *res;
-	int ret = 0;
-
-	/* Allocate memory for the device structure (and zero it) */
-	host = kzalloc(sizeof(struct nomadik_nand_host), GFP_KERNEL);
-	if (!host) {
-		dev_err(&pdev->dev, "Failed to allocate device structure.\n");
-		return -ENOMEM;
-	}
-
-	/* Call the client's init function, if any */
-	if (pdata->init)
-		ret = pdata->init();
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Init function failed\n");
-		goto err;
-	}
-
-	/* ioremap three regions */
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_addr");
-	if (!res) {
-		ret = -EIO;
-		goto err_unmap;
-	}
-	host->addr_va = ioremap(res->start, resource_size(res));
-
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data");
-	if (!res) {
-		ret = -EIO;
-		goto err_unmap;
-	}
-	host->data_va = ioremap(res->start, resource_size(res));
-
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_cmd");
-	if (!res) {
-		ret = -EIO;
-		goto err_unmap;
-	}
-	host->cmd_va = ioremap(res->start, resource_size(res));
-
-	if (!host->addr_va || !host->data_va || !host->cmd_va) {
-		ret = -ENOMEM;
-		goto err_unmap;
-	}
-
-	/* Link all private pointers */
-	mtd = &host->mtd;
-	nand = &host->nand;
-	mtd->priv = nand;
-	nand->priv = host;
-
-	host->mtd.owner = THIS_MODULE;
-	nand->IO_ADDR_R = host->data_va;
-	nand->IO_ADDR_W = host->data_va;
-	nand->cmd_ctrl = nomadik_cmd_ctrl;
-
-	/*
-	 * This stanza declares ECC_HW but uses soft routines. It's because
-	 * HW claims to make the calculation but not the correction. However,
-	 * I haven't managed to get the desired data out of it until now.
-	 */
-	nand->ecc.mode = NAND_ECC_SOFT;
-	nand->ecc.layout = &nomadik_ecc_layout;
-	nand->ecc.hwctl = nomadik_ecc_control;
-	nand->ecc.size = 512;
-	nand->ecc.bytes = 3;
-
-	nand->options = pdata->options;
-
-	/*
-	 * Scan to find existance of the device
-	 */
-	if (nand_scan(&host->mtd, 1)) {
-		ret = -ENXIO;
-		goto err_unmap;
-	}
-
-#ifdef CONFIG_MTD_PARTITIONS
-	add_mtd_partitions(&host->mtd, pdata->parts, pdata->nparts);
-#else
-	pr_info("Registering %s as whole device\n", mtd->name);
-	add_mtd_device(mtd);
-#endif
-
-	platform_set_drvdata(pdev, host);
-	return 0;
-
- err_unmap:
-	if (host->cmd_va)
-		iounmap(host->cmd_va);
-	if (host->data_va)
-		iounmap(host->data_va);
-	if (host->addr_va)
-		iounmap(host->addr_va);
- err:
-	kfree(host);
-	return ret;
-}
-
-/*
- * Clean up routine
- */
-static int nomadik_nand_remove(struct platform_device *pdev)
-{
-	struct nomadik_nand_host *host = platform_get_drvdata(pdev);
-	struct nomadik_nand_platform_data *pdata = pdev->dev.platform_data;
-
-	if (pdata->exit)
-		pdata->exit();
-
-	if (host) {
-		iounmap(host->cmd_va);
-		iounmap(host->data_va);
-		iounmap(host->addr_va);
-		kfree(host);
-	}
-	return 0;
-}
-
-static int nomadik_nand_suspend(struct device *dev)
-{
-	struct nomadik_nand_host *host = dev_get_drvdata(dev);
-	int ret = 0;
-	if (host)
-		ret = host->mtd.suspend(&host->mtd);
-	return ret;
-}
-
-static int nomadik_nand_resume(struct device *dev)
-{
-	struct nomadik_nand_host *host = dev_get_drvdata(dev);
-	if (host)
-		host->mtd.resume(&host->mtd);
-	return 0;
-}
-
-static const struct dev_pm_ops nomadik_nand_pm_ops = {
-	.suspend = nomadik_nand_suspend,
-	.resume = nomadik_nand_resume,
-};
-
-static struct platform_driver nomadik_nand_driver = {
-	.probe = nomadik_nand_probe,
-	.remove = nomadik_nand_remove,
-	.driver = {
-		.owner = THIS_MODULE,
-		.name = "nomadik_nand",
-		.pm = &nomadik_nand_pm_ops,
-	},
-};
-
-static int __init nand_nomadik_init(void)
-{
-	pr_info("Nomadik NAND driver\n");
-	return platform_driver_register(&nomadik_nand_driver);
-}
-
-static void __exit nand_nomadik_exit(void)
-{
-	platform_driver_unregister(&nomadik_nand_driver);
-}
-
-module_init(nand_nomadik_init);
-module_exit(nand_nomadik_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("ST Microelectronics (sachin.verma@st.com)");
-MODULE_DESCRIPTION("NAND driver for Nomadik Platform");
diff --git a/drivers/mtd/nand/nuc900_nand.c b/drivers/mtd/nand/nuc900_nand.c
index 6eddf7361ed..e8a5fffd6ab 100644
--- a/drivers/mtd/nand/nuc900_nand.c
+++ b/drivers/mtd/nand/nuc900_nand.c
@@ -10,7 +10,6 @@
  */
 
 #include <linux/slab.h>
-#include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
@@ -112,22 +111,6 @@ static void nuc900_nand_write_buf(struct mtd_info *mtd,
 		write_data_reg(nand, buf[i]);
 }
 
-static int nuc900_verify_buf(struct mtd_info *mtd,
-			     const unsigned char *buf, int len)
-{
-	int i;
-	struct nuc900_nand *nand;
-
-	nand = container_of(mtd, struct nuc900_nand, mtd);
-
-	for (i = 0; i < len; i++) {
-		if (buf[i] != (unsigned char)read_data_reg(nand))
-			return -EFAULT;
-	}
-
-	return 0;
-}
-
 static int nuc900_check_rb(struct nuc900_nand *nand)
 {
 	unsigned int val;
@@ -168,7 +151,8 @@ static void nuc900_nand_command_lp(struct mtd_info *mtd, unsigned int command,
 	if (column != -1 || page_addr != -1) {
 
 		if (column != -1) {
-			if (chip->options & NAND_BUSWIDTH_16)
+			if (chip->options & NAND_BUSWIDTH_16 &&
+					!nand_opcode_8bits(command))
 				column >>= 1;
 			write_addr_reg(nand, column);
 			write_addr_reg(nand, column >> 8 | ENDADDR);
@@ -193,15 +177,6 @@ static void nuc900_nand_command_lp(struct mtd_info *mtd, unsigned int command,
 	case NAND_CMD_SEQIN:
 	case NAND_CMD_RNDIN:
 	case NAND_CMD_STATUS:
-	case NAND_CMD_DEPLETE1:
-		return;
-
-	case NAND_CMD_STATUS_ERROR:
-	case NAND_CMD_STATUS_ERROR0:
-	case NAND_CMD_STATUS_ERROR1:
-	case NAND_CMD_STATUS_ERROR2:
-	case NAND_CMD_STATUS_ERROR3:
-		udelay(chip->chip_delay);
 		return;
 
 	case NAND_CMD_RESET:
@@ -250,7 +225,7 @@ static void nuc900_nand_enable(struct nuc900_nand *nand)
 	val = __raw_readl(nand->reg + REG_FMICSR);
 
 	if (!(val & NAND_EN))
-		__raw_writel(val | NAND_EN, REG_FMICSR);
+		__raw_writel(val | NAND_EN, nand->reg + REG_FMICSR);
 
 	val = __raw_readl(nand->reg + REG_SMCSR);
 
@@ -262,16 +237,14 @@ static void nuc900_nand_enable(struct nuc900_nand *nand)
 	spin_unlock(&nand->lock);
 }
 
-static int __devinit nuc900_nand_probe(struct platform_device *pdev)
+static int nuc900_nand_probe(struct platform_device *pdev)
 {
 	struct nuc900_nand *nuc900_nand;
 	struct nand_chip *chip;
-	int retval;
 	struct resource *res;
 
-	retval = 0;
-
-	nuc900_nand = kzalloc(sizeof(struct nuc900_nand), GFP_KERNEL);
+	nuc900_nand = devm_kzalloc(&pdev->dev, sizeof(struct nuc900_nand),
+				   GFP_KERNEL);
 	if (!nuc900_nand)
 		return -ENOMEM;
 	chip = &(nuc900_nand->chip);
@@ -280,11 +253,9 @@ static int __devinit nuc900_nand_probe(struct platform_device *pdev)
 	nuc900_nand->mtd.owner	= THIS_MODULE;
 	spin_lock_init(&nuc900_nand->lock);
 
-	nuc900_nand->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(nuc900_nand->clk)) {
-		retval = -ENOENT;
-		goto fail1;
-	}
+	nuc900_nand->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(nuc900_nand->clk))
+		return -ENOENT;
 	clk_enable(nuc900_nand->clk);
 
 	chip->cmdfunc		= nuc900_nand_command_lp;
@@ -292,89 +263,48 @@ static int __devinit nuc900_nand_probe(struct platform_device *pdev)
 	chip->read_byte		= nuc900_nand_read_byte;
 	chip->write_buf		= nuc900_nand_write_buf;
 	chip->read_buf		= nuc900_nand_read_buf;
-	chip->verify_buf	= nuc900_verify_buf;
 	chip->chip_delay	= 50;
 	chip->options		= 0;
 	chip->ecc.mode		= NAND_ECC_SOFT;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		retval = -ENXIO;
-		goto fail1;
-	}
-
-	if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
-		retval = -EBUSY;
-		goto fail1;
-	}
-
-	nuc900_nand->reg = ioremap(res->start, resource_size(res));
-	if (!nuc900_nand->reg) {
-		retval = -ENOMEM;
-		goto fail2;
-	}
+	nuc900_nand->reg = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(nuc900_nand->reg))
+		return PTR_ERR(nuc900_nand->reg);
 
 	nuc900_nand_enable(nuc900_nand);
 
-	if (nand_scan(&(nuc900_nand->mtd), 1)) {
-		retval = -ENXIO;
-		goto fail3;
-	}
+	if (nand_scan(&(nuc900_nand->mtd), 1))
+		return -ENXIO;
 
-	add_mtd_partitions(&(nuc900_nand->mtd), partitions,
-						ARRAY_SIZE(partitions));
+	mtd_device_register(&(nuc900_nand->mtd), partitions,
+			    ARRAY_SIZE(partitions));
 
 	platform_set_drvdata(pdev, nuc900_nand);
 
-	return retval;
-
-fail3:	iounmap(nuc900_nand->reg);
-fail2:	release_mem_region(res->start, resource_size(res));
-fail1:	kfree(nuc900_nand);
-	return retval;
+	return 0;
 }
 
-static int __devexit nuc900_nand_remove(struct platform_device *pdev)
+static int nuc900_nand_remove(struct platform_device *pdev)
 {
 	struct nuc900_nand *nuc900_nand = platform_get_drvdata(pdev);
-	struct resource *res;
-
-	iounmap(nuc900_nand->reg);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, resource_size(res));
 
+	nand_release(&nuc900_nand->mtd);
 	clk_disable(nuc900_nand->clk);
-	clk_put(nuc900_nand->clk);
-
-	kfree(nuc900_nand);
-
-	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }
 
 static struct platform_driver nuc900_nand_driver = {
 	.probe		= nuc900_nand_probe,
-	.remove		= __devexit_p(nuc900_nand_remove),
+	.remove		= nuc900_nand_remove,
 	.driver		= {
 		.name	= "nuc900-fmi",
 		.owner	= THIS_MODULE,
 	},
 };
 
-static int __init nuc900_nand_init(void)
-{
-	return platform_driver_register(&nuc900_nand_driver);
-}
-
-static void __exit nuc900_nand_exit(void)
-{
-	platform_driver_unregister(&nuc900_nand_driver);
-}
-
-module_init(nuc900_nand_init);
-module_exit(nuc900_nand_exit);
+module_platform_driver(nuc900_nand_driver);
 
 MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
 MODULE_DESCRIPTION("w90p910/NUC9xx nand driver!");
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index ee87325c771..f0ed92e210a 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -9,33 +9,29 @@
  */
 
 #include <linux/platform_device.h>
+#include <linux/dmaengine.h>
 #include <linux/dma-mapping.h>
 #include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
 #include <linux/jiffies.h>
 #include <linux/sched.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/omap-dma.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
-#include <plat/dma.h>
-#include <plat/gpmc.h>
-#include <plat/nand.h>
+#include <linux/mtd/nand_bch.h>
+#include <linux/platform_data/elm.h>
 
-#define GPMC_IRQ_STATUS		0x18
-#define GPMC_ECC_CONFIG		0x1F4
-#define GPMC_ECC_CONTROL	0x1F8
-#define GPMC_ECC_SIZE_CONFIG	0x1FC
-#define GPMC_ECC1_RESULT	0x200
+#include <linux/platform_data/mtd-nand-omap2.h>
 
 #define	DRIVER_NAME	"omap2-nand"
-
-#define	NAND_WP_OFF	0
-#define NAND_WP_BIT	0x00000010
-
-#define	GPMC_BUF_FULL	0x00000001
-#define	GPMC_BUF_EMPTY	0x00000000
+#define	OMAP_NAND_TIMEOUT_MS	5000
 
 #define NAND_Ecc_P1e		(1 << 0)
 #define NAND_Ecc_P2e		(1 << 1)
@@ -104,66 +100,136 @@
 #define P4e_s(a)	(TF(a & NAND_Ecc_P4e)		<< 0)
 #define P4o_s(a)	(TF(a & NAND_Ecc_P4o)		<< 1)
 
-#ifdef CONFIG_MTD_PARTITIONS
-static const char *part_probes[] = { "cmdlinepart", NULL };
+#define	PREFETCH_CONFIG1_CS_SHIFT	24
+#define	ECC_CONFIG_CS_SHIFT		1
+#define	CS_MASK				0x7
+#define	ENABLE_PREFETCH			(0x1 << 7)
+#define	DMA_MPU_MODE_SHIFT		2
+#define	ECCSIZE0_SHIFT			12
+#define	ECCSIZE1_SHIFT			22
+#define	ECC1RESULTSIZE			0x1
+#define	ECCCLEAR			0x100
+#define	ECC1				0x1
+#define	PREFETCH_FIFOTHRESHOLD_MAX	0x40
+#define	PREFETCH_FIFOTHRESHOLD(val)	((val) << 8)
+#define	PREFETCH_STATUS_COUNT(val)	(val & 0x00003fff)
+#define	PREFETCH_STATUS_FIFO_CNT(val)	((val >> 24) & 0x7F)
+#define	STATUS_BUFF_EMPTY		0x00000001
+
+#define OMAP24XX_DMA_GPMC		4
+
+#define SECTOR_BYTES		512
+/* 4 bit padding to make byte aligned, 56 = 52 + 4 */
+#define BCH4_BIT_PAD		4
+
+/* GPMC ecc engine settings for read */
+#define BCH_WRAPMODE_1		1	/* BCH wrap mode 1 */
+#define BCH8R_ECC_SIZE0		0x1a	/* ecc_size0 = 26 */
+#define BCH8R_ECC_SIZE1		0x2	/* ecc_size1 = 2 */
+#define BCH4R_ECC_SIZE0		0xd	/* ecc_size0 = 13 */
+#define BCH4R_ECC_SIZE1		0x3	/* ecc_size1 = 3 */
+
+/* GPMC ecc engine settings for write */
+#define BCH_WRAPMODE_6		6	/* BCH wrap mode 6 */
+#define BCH_ECC_SIZE0		0x0	/* ecc_size0 = 0, no oob protection */
+#define BCH_ECC_SIZE1		0x20	/* ecc_size1 = 32 */
+
+#define BADBLOCK_MARKER_LENGTH		2
+
+#ifdef CONFIG_MTD_NAND_OMAP_BCH
+static u_char bch16_vector[] = {0xf5, 0x24, 0x1c, 0xd0, 0x61, 0xb3, 0xf1, 0x55,
+				0x2e, 0x2c, 0x86, 0xa3, 0xed, 0x36, 0x1b, 0x78,
+				0x48, 0x76, 0xa9, 0x3b, 0x97, 0xd1, 0x7a, 0x93,
+				0x07, 0x0e};
+static u_char bch8_vector[] = {0xf3, 0xdb, 0x14, 0x16, 0x8b, 0xd2, 0xbe, 0xcc,
+	0xac, 0x6b, 0xff, 0x99, 0x7b};
+static u_char bch4_vector[] = {0x00, 0x6b, 0x31, 0xdd, 0x41, 0xbc, 0x10};
 #endif
 
-#ifdef CONFIG_MTD_NAND_OMAP_PREFETCH
-static int use_prefetch = 1;
-
-/* "modprobe ... use_prefetch=0" etc */
-module_param(use_prefetch, bool, 0);
-MODULE_PARM_DESC(use_prefetch, "enable/disable use of PREFETCH");
-
-#ifdef CONFIG_MTD_NAND_OMAP_PREFETCH_DMA
-static int use_dma = 1;
-
-/* "modprobe ... use_dma=0" etc */
-module_param(use_dma, bool, 0);
-MODULE_PARM_DESC(use_dma, "enable/disable use of DMA");
-#else
-const int use_dma;
-#endif
-#else
-const int use_prefetch;
-const int use_dma;
-#endif
+/* oob info generated runtime depending on ecc algorithm and layout selected */
+static struct nand_ecclayout omap_oobinfo;
 
 struct omap_nand_info {
 	struct nand_hw_control		controller;
 	struct omap_nand_platform_data	*pdata;
 	struct mtd_info			mtd;
-	struct mtd_partition		*parts;
 	struct nand_chip		nand;
 	struct platform_device		*pdev;
 
 	int				gpmc_cs;
 	unsigned long			phys_base;
-	void __iomem			*gpmc_cs_baseaddr;
-	void __iomem			*gpmc_baseaddr;
-	void __iomem			*nand_pref_fifo_add;
+	enum omap_ecc			ecc_opt;
 	struct completion		comp;
-	int				dma_ch;
+	struct dma_chan			*dma;
+	int				gpmc_irq_fifo;
+	int				gpmc_irq_count;
+	enum {
+		OMAP_NAND_IO_READ = 0,	/* read */
+		OMAP_NAND_IO_WRITE,	/* write */
+	} iomode;
+	u_char				*buf;
+	int					buf_len;
+	struct gpmc_nand_regs		reg;
+	/* fields specific for BCHx_HW ECC scheme */
+	struct device			*elm_dev;
+	struct device_node		*of_node;
 };
 
 /**
- * omap_nand_wp - This function enable or disable the Write Protect feature
- * @mtd: MTD device structure
- * @mode: WP ON/OFF
+ * omap_prefetch_enable - configures and starts prefetch transfer
+ * @cs: cs (chip select) number
+ * @fifo_th: fifo threshold to be used for read/ write
+ * @dma_mode: dma mode enable (1) or disable (0)
+ * @u32_count: number of bytes to be transferred
+ * @is_write: prefetch read(0) or write post(1) mode
  */
-static void omap_nand_wp(struct mtd_info *mtd, int mode)
+static int omap_prefetch_enable(int cs, int fifo_th, int dma_mode,
+	unsigned int u32_count, int is_write, struct omap_nand_info *info)
 {
-	struct omap_nand_info *info = container_of(mtd,
-						struct omap_nand_info, mtd);
+	u32 val;
 
-	unsigned long config = __raw_readl(info->gpmc_baseaddr + GPMC_CONFIG);
+	if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX)
+		return -1;
 
-	if (mode)
-		config &= ~(NAND_WP_BIT);	/* WP is ON */
-	else
-		config |= (NAND_WP_BIT);	/* WP is OFF */
+	if (readl(info->reg.gpmc_prefetch_control))
+		return -EBUSY;
+
+	/* Set the amount of bytes to be prefetched */
+	writel(u32_count, info->reg.gpmc_prefetch_config2);
+
+	/* Set dma/mpu mode, the prefetch read / post write and
+	 * enable the engine. Set which cs is has requested for.
+	 */
+	val = ((cs << PREFETCH_CONFIG1_CS_SHIFT) |
+		PREFETCH_FIFOTHRESHOLD(fifo_th) | ENABLE_PREFETCH |
+		(dma_mode << DMA_MPU_MODE_SHIFT) | (0x1 & is_write));
+	writel(val, info->reg.gpmc_prefetch_config1);
+
+	/*  Start the prefetch engine */
+	writel(0x1, info->reg.gpmc_prefetch_control);
+
+	return 0;
+}
+
+/**
+ * omap_prefetch_reset - disables and stops the prefetch engine
+ */
+static int omap_prefetch_reset(int cs, struct omap_nand_info *info)
+{
+	u32 config1;
+
+	/* check if the same module/cs is trying to reset */
+	config1 = readl(info->reg.gpmc_prefetch_config1);
+	if (((config1 >> PREFETCH_CONFIG1_CS_SHIFT) & CS_MASK) != cs)
+		return -EINVAL;
 
-	__raw_writel(config, (info->gpmc_baseaddr + GPMC_CONFIG));
+	/* Stop the PFPW engine */
+	writel(0x0, info->reg.gpmc_prefetch_control);
+
+	/* Reset/disable the PFPW engine */
+	writel(0x0, info->reg.gpmc_prefetch_config1);
+
+	return 0;
 }
 
 /**
@@ -181,31 +247,17 @@ static void omap_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
 	struct omap_nand_info *info = container_of(mtd,
 					struct omap_nand_info, mtd);
-	switch (ctrl) {
-	case NAND_CTRL_CHANGE | NAND_CTRL_CLE:
-		info->nand.IO_ADDR_W = info->gpmc_cs_baseaddr +
-						GPMC_CS_NAND_COMMAND;
-		info->nand.IO_ADDR_R = info->gpmc_cs_baseaddr +
-						GPMC_CS_NAND_DATA;
-		break;
 
-	case NAND_CTRL_CHANGE | NAND_CTRL_ALE:
-		info->nand.IO_ADDR_W = info->gpmc_cs_baseaddr +
-						GPMC_CS_NAND_ADDRESS;
-		info->nand.IO_ADDR_R = info->gpmc_cs_baseaddr +
-						GPMC_CS_NAND_DATA;
-		break;
+	if (cmd != NAND_CMD_NONE) {
+		if (ctrl & NAND_CLE)
+			writeb(cmd, info->reg.gpmc_nand_command);
 
-	case NAND_CTRL_CHANGE | NAND_NCE:
-		info->nand.IO_ADDR_W = info->gpmc_cs_baseaddr +
-						GPMC_CS_NAND_DATA;
-		info->nand.IO_ADDR_R = info->gpmc_cs_baseaddr +
-						GPMC_CS_NAND_DATA;
-		break;
-	}
+		else if (ctrl & NAND_ALE)
+			writeb(cmd, info->reg.gpmc_nand_address);
 
-	if (cmd != NAND_CMD_NONE)
-		__raw_writeb(cmd, info->nand.IO_ADDR_W);
+		else /* NAND_NCE */
+			writeb(cmd, info->reg.gpmc_nand_data);
+	}
 }
 
 /**
@@ -232,11 +284,15 @@ static void omap_write_buf8(struct mtd_info *mtd, const u_char *buf, int len)
 	struct omap_nand_info *info = container_of(mtd,
 						struct omap_nand_info, mtd);
 	u_char *p = (u_char *)buf;
+	u32	status = 0;
 
 	while (len--) {
 		iowrite8(*p++, info->nand.IO_ADDR_W);
-		while (GPMC_BUF_EMPTY == (readl(info->gpmc_baseaddr +
-						GPMC_STATUS) & GPMC_BUF_FULL));
+		/* wait until buffer is available for write */
+		do {
+			status = readl(info->reg.gpmc_status) &
+					STATUS_BUFF_EMPTY;
+		} while (!status);
 	}
 }
 
@@ -264,16 +320,17 @@ static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len)
 	struct omap_nand_info *info = container_of(mtd,
 						struct omap_nand_info, mtd);
 	u16 *p = (u16 *) buf;
-
+	u32	status = 0;
 	/* FIXME try bursts of writesw() or DMA ... */
 	len >>= 1;
 
 	while (len--) {
 		iowrite16(*p++, info->nand.IO_ADDR_W);
-
-		while (GPMC_BUF_EMPTY == (readl(info->gpmc_baseaddr +
-						GPMC_STATUS) & GPMC_BUF_FULL))
-			;
+		/* wait until buffer is available for write */
+		do {
+			status = readl(info->reg.gpmc_status) &
+					STATUS_BUFF_EMPTY;
+		} while (!status);
 	}
 }
 
@@ -287,7 +344,7 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
 {
 	struct omap_nand_info *info = container_of(mtd,
 						struct omap_nand_info, mtd);
-	uint32_t pfpw_status = 0, r_count = 0;
+	uint32_t r_count = 0;
 	int ret = 0;
 	u32 *p = (u32 *)buf;
 
@@ -302,24 +359,25 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
 	}
 
 	/* configure and start prefetch transfer */
-	ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x0);
+	ret = omap_prefetch_enable(info->gpmc_cs,
+			PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x0, info);
 	if (ret) {
 		/* PFPW engine is busy, use cpu copy method */
 		if (info->nand.options & NAND_BUSWIDTH_16)
-			omap_read_buf16(mtd, buf, len);
+			omap_read_buf16(mtd, (u_char *)p, len);
 		else
-			omap_read_buf8(mtd, buf, len);
+			omap_read_buf8(mtd, (u_char *)p, len);
 	} else {
 		do {
-			pfpw_status = gpmc_prefetch_status();
-			r_count = ((pfpw_status >> 24) & 0x7F) >> 2;
-			ioread32_rep(info->nand_pref_fifo_add, p, r_count);
+			r_count = readl(info->reg.gpmc_prefetch_status);
+			r_count = PREFETCH_STATUS_FIFO_CNT(r_count);
+			r_count = r_count >> 2;
+			ioread32_rep(info->nand.IO_ADDR_R, p, r_count);
 			p += r_count;
 			len -= r_count << 2;
 		} while (len);
-
 		/* disable and stop the PFPW engine */
-		gpmc_prefetch_reset();
+		omap_prefetch_reset(info->gpmc_cs, info);
 	}
 }
 
@@ -334,53 +392,62 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
 {
 	struct omap_nand_info *info = container_of(mtd,
 						struct omap_nand_info, mtd);
-	uint32_t pfpw_status = 0, w_count = 0;
+	uint32_t w_count = 0;
 	int i = 0, ret = 0;
-	u16 *p = (u16 *) buf;
+	u16 *p = (u16 *)buf;
+	unsigned long tim, limit;
+	u32 val;
 
 	/* take care of subpage writes */
 	if (len % 2 != 0) {
-		writeb(*buf, info->nand.IO_ADDR_R);
+		writeb(*buf, info->nand.IO_ADDR_W);
 		p = (u16 *)(buf + 1);
 		len--;
 	}
 
 	/*  configure and start prefetch transfer */
-	ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x1);
+	ret = omap_prefetch_enable(info->gpmc_cs,
+			PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x1, info);
 	if (ret) {
 		/* PFPW engine is busy, use cpu copy method */
 		if (info->nand.options & NAND_BUSWIDTH_16)
-			omap_write_buf16(mtd, buf, len);
+			omap_write_buf16(mtd, (u_char *)p, len);
 		else
-			omap_write_buf8(mtd, buf, len);
+			omap_write_buf8(mtd, (u_char *)p, len);
 	} else {
-		pfpw_status = gpmc_prefetch_status();
-		while (pfpw_status & 0x3FFF) {
-			w_count = ((pfpw_status >> 24) & 0x7F) >> 1;
+		while (len) {
+			w_count = readl(info->reg.gpmc_prefetch_status);
+			w_count = PREFETCH_STATUS_FIFO_CNT(w_count);
+			w_count = w_count >> 1;
 			for (i = 0; (i < w_count) && len; i++, len -= 2)
-				iowrite16(*p++, info->nand_pref_fifo_add);
-			pfpw_status = gpmc_prefetch_status();
+				iowrite16(*p++, info->nand.IO_ADDR_W);
 		}
+		/* wait for data to flushed-out before reset the prefetch */
+		tim = 0;
+		limit = (loops_per_jiffy *
+					msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
+		do {
+			cpu_relax();
+			val = readl(info->reg.gpmc_prefetch_status);
+			val = PREFETCH_STATUS_COUNT(val);
+		} while (val && (tim++ < limit));
 
 		/* disable and stop the PFPW engine */
-		gpmc_prefetch_reset();
+		omap_prefetch_reset(info->gpmc_cs, info);
 	}
 }
 
-#ifdef CONFIG_MTD_NAND_OMAP_PREFETCH_DMA
 /*
- * omap_nand_dma_cb: callback on the completion of dma transfer
- * @lch: logical channel
- * @ch_satuts: channel status
+ * omap_nand_dma_callback: callback on the completion of dma transfer
  * @data: pointer to completion data structure
  */
-static void omap_nand_dma_cb(int lch, u16 ch_status, void *data)
+static void omap_nand_dma_callback(void *data)
 {
 	complete((struct completion *) data);
 }
 
 /*
- * omap_nand_dma_transfer: configer and start dma transfer
+ * omap_nand_dma_transfer: configure and start dma transfer
  * @mtd: MTD device structure
  * @addr: virtual address in RAM of source/destination
  * @len: number of data bytes to be transferred
@@ -391,16 +458,14 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
 {
 	struct omap_nand_info *info = container_of(mtd,
 					struct omap_nand_info, mtd);
-	uint32_t prefetch_status = 0;
+	struct dma_async_tx_descriptor *tx;
 	enum dma_data_direction dir = is_write ? DMA_TO_DEVICE :
 							DMA_FROM_DEVICE;
-	dma_addr_t dma_addr;
+	struct scatterlist sg;
+	unsigned long tim, limit;
+	unsigned n;
 	int ret;
-
-	/* The fifo depth is 64 bytes. We have a sync at each frame and frame
-	 * length is 64 bytes.
-	 */
-	int buf_len = len >> 6;
+	u32 val;
 
 	if (addr >= high_memory) {
 		struct page *p1;
@@ -414,51 +479,53 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
 		addr = page_address(p1) + ((size_t)addr & ~PAGE_MASK);
 	}
 
-	dma_addr = dma_map_single(&info->pdev->dev, addr, len, dir);
-	if (dma_mapping_error(&info->pdev->dev, dma_addr)) {
+	sg_init_one(&sg, addr, len);
+	n = dma_map_sg(info->dma->device->dev, &sg, 1, dir);
+	if (n == 0) {
 		dev_err(&info->pdev->dev,
 			"Couldn't DMA map a %d byte buffer\n", len);
 		goto out_copy;
 	}
 
-	if (is_write) {
-	    omap_set_dma_dest_params(info->dma_ch, 0, OMAP_DMA_AMODE_CONSTANT,
-						info->phys_base, 0, 0);
-	    omap_set_dma_src_params(info->dma_ch, 0, OMAP_DMA_AMODE_POST_INC,
-							dma_addr, 0, 0);
-	    omap_set_dma_transfer_params(info->dma_ch, OMAP_DMA_DATA_TYPE_S32,
-					0x10, buf_len, OMAP_DMA_SYNC_FRAME,
-					OMAP24XX_DMA_GPMC, OMAP_DMA_DST_SYNC);
-	} else {
-	    omap_set_dma_src_params(info->dma_ch, 0, OMAP_DMA_AMODE_CONSTANT,
-						info->phys_base, 0, 0);
-	    omap_set_dma_dest_params(info->dma_ch, 0, OMAP_DMA_AMODE_POST_INC,
-							dma_addr, 0, 0);
-	    omap_set_dma_transfer_params(info->dma_ch, OMAP_DMA_DATA_TYPE_S32,
-					0x10, buf_len, OMAP_DMA_SYNC_FRAME,
-					OMAP24XX_DMA_GPMC, OMAP_DMA_SRC_SYNC);
-	}
+	tx = dmaengine_prep_slave_sg(info->dma, &sg, n,
+		is_write ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM,
+		DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!tx)
+		goto out_copy_unmap;
+
+	tx->callback = omap_nand_dma_callback;
+	tx->callback_param = &info->comp;
+	dmaengine_submit(tx);
+
 	/*  configure and start prefetch transfer */
-	ret = gpmc_prefetch_enable(info->gpmc_cs, 0x1, len, is_write);
+	ret = omap_prefetch_enable(info->gpmc_cs,
+		PREFETCH_FIFOTHRESHOLD_MAX, 0x1, len, is_write, info);
 	if (ret)
-		/* PFPW engine is busy, use cpu copy methode */
-		goto out_copy;
+		/* PFPW engine is busy, use cpu copy method */
+		goto out_copy_unmap;
 
 	init_completion(&info->comp);
-
-	omap_start_dma(info->dma_ch);
+	dma_async_issue_pending(info->dma);
 
 	/* setup and start DMA using dma_addr */
 	wait_for_completion(&info->comp);
+	tim = 0;
+	limit = (loops_per_jiffy * msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
+
+	do {
+		cpu_relax();
+		val = readl(info->reg.gpmc_prefetch_status);
+		val = PREFETCH_STATUS_COUNT(val);
+	} while (val && (tim++ < limit));
 
-	while (0x3fff & (prefetch_status = gpmc_prefetch_status()))
-		;
 	/* disable and stop the PFPW engine */
-	gpmc_prefetch_reset();
+	omap_prefetch_reset(info->gpmc_cs, info);
 
-	dma_unmap_single(&info->pdev->dev, dma_addr, len, dir);
+	dma_unmap_sg(info->dma->device->dev, &sg, 1, dir);
 	return 0;
 
+out_copy_unmap:
+	dma_unmap_sg(info->dma->device->dev, &sg, 1, dir);
 out_copy:
 	if (info->nand.options & NAND_BUSWIDTH_16)
 		is_write == 0 ? omap_read_buf16(mtd, (u_char *) addr, len)
@@ -468,14 +535,6 @@ out_copy:
 			: omap_write_buf8(mtd, (u_char *) addr, len);
 	return 0;
 }
-#else
-static void omap_nand_dma_cb(int lch, u16 ch_status, void *data) {}
-static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
-					unsigned int len, int is_write)
-{
-	return 0;
-}
-#endif
 
 /**
  * omap_read_buf_dma_pref - read data from NAND controller into buffer
@@ -508,50 +567,156 @@ static void omap_write_buf_dma_pref(struct mtd_info *mtd,
 		omap_nand_dma_transfer(mtd, (u_char *) buf, len, 0x1);
 }
 
-/**
- * omap_verify_buf - Verify chip data against buffer
+/*
+ * omap_nand_irq - GPMC irq handler
+ * @this_irq: gpmc irq number
+ * @dev: omap_nand_info structure pointer is passed here
+ */
+static irqreturn_t omap_nand_irq(int this_irq, void *dev)
+{
+	struct omap_nand_info *info = (struct omap_nand_info *) dev;
+	u32 bytes;
+
+	bytes = readl(info->reg.gpmc_prefetch_status);
+	bytes = PREFETCH_STATUS_FIFO_CNT(bytes);
+	bytes = bytes  & 0xFFFC; /* io in multiple of 4 bytes */
+	if (info->iomode == OMAP_NAND_IO_WRITE) { /* checks for write io */
+		if (this_irq == info->gpmc_irq_count)
+			goto done;
+
+		if (info->buf_len && (info->buf_len < bytes))
+			bytes = info->buf_len;
+		else if (!info->buf_len)
+			bytes = 0;
+		iowrite32_rep(info->nand.IO_ADDR_W,
+						(u32 *)info->buf, bytes >> 2);
+		info->buf = info->buf + bytes;
+		info->buf_len -= bytes;
+
+	} else {
+		ioread32_rep(info->nand.IO_ADDR_R,
+						(u32 *)info->buf, bytes >> 2);
+		info->buf = info->buf + bytes;
+
+		if (this_irq == info->gpmc_irq_count)
+			goto done;
+	}
+
+	return IRQ_HANDLED;
+
+done:
+	complete(&info->comp);
+
+	disable_irq_nosync(info->gpmc_irq_fifo);
+	disable_irq_nosync(info->gpmc_irq_count);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * omap_read_buf_irq_pref - read data from NAND controller into buffer
  * @mtd: MTD device structure
- * @buf: buffer containing the data to compare
- * @len: number of bytes to compare
+ * @buf: buffer to store date
+ * @len: number of bytes to read
  */
-static int omap_verify_buf(struct mtd_info *mtd, const u_char * buf, int len)
+static void omap_read_buf_irq_pref(struct mtd_info *mtd, u_char *buf, int len)
 {
-	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
-							mtd);
-	u16 *p = (u16 *) buf;
+	struct omap_nand_info *info = container_of(mtd,
+						struct omap_nand_info, mtd);
+	int ret = 0;
 
-	len >>= 1;
-	while (len--) {
-		if (*p++ != cpu_to_le16(readw(info->nand.IO_ADDR_R)))
-			return -EFAULT;
+	if (len <= mtd->oobsize) {
+		omap_read_buf_pref(mtd, buf, len);
+		return;
 	}
 
-	return 0;
+	info->iomode = OMAP_NAND_IO_READ;
+	info->buf = buf;
+	init_completion(&info->comp);
+
+	/*  configure and start prefetch transfer */
+	ret = omap_prefetch_enable(info->gpmc_cs,
+			PREFETCH_FIFOTHRESHOLD_MAX/2, 0x0, len, 0x0, info);
+	if (ret)
+		/* PFPW engine is busy, use cpu copy method */
+		goto out_copy;
+
+	info->buf_len = len;
+
+	enable_irq(info->gpmc_irq_count);
+	enable_irq(info->gpmc_irq_fifo);
+
+	/* waiting for read to complete */
+	wait_for_completion(&info->comp);
+
+	/* disable and stop the PFPW engine */
+	omap_prefetch_reset(info->gpmc_cs, info);
+	return;
+
+out_copy:
+	if (info->nand.options & NAND_BUSWIDTH_16)
+		omap_read_buf16(mtd, buf, len);
+	else
+		omap_read_buf8(mtd, buf, len);
 }
 
-#ifdef CONFIG_MTD_NAND_OMAP_HWECC
-/**
- * omap_hwecc_init - Initialize the HW ECC for NAND flash in GPMC controller
+/*
+ * omap_write_buf_irq_pref - write buffer to NAND controller
  * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
  */
-static void omap_hwecc_init(struct mtd_info *mtd)
+static void omap_write_buf_irq_pref(struct mtd_info *mtd,
+					const u_char *buf, int len)
 {
-	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
-							mtd);
-	struct nand_chip *chip = mtd->priv;
-	unsigned long val = 0x0;
-
-	/* Read from ECC Control Register */
-	val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_CONTROL);
-	/* Clear all ECC | Enable Reg1 */
-	val = ((0x00000001<<8) | 0x00000001);
-	__raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
-
-	/* Read from ECC Size Config Register */
-	val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_SIZE_CONFIG);
-	/* ECCSIZE1=512 | Select eccResultsize[0-3] */
-	val = ((((chip->ecc.size >> 1) - 1) << 22) | (0x0000000F));
-	__raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_SIZE_CONFIG);
+	struct omap_nand_info *info = container_of(mtd,
+						struct omap_nand_info, mtd);
+	int ret = 0;
+	unsigned long tim, limit;
+	u32 val;
+
+	if (len <= mtd->oobsize) {
+		omap_write_buf_pref(mtd, buf, len);
+		return;
+	}
+
+	info->iomode = OMAP_NAND_IO_WRITE;
+	info->buf = (u_char *) buf;
+	init_completion(&info->comp);
+
+	/* configure and start prefetch transfer : size=24 */
+	ret = omap_prefetch_enable(info->gpmc_cs,
+		(PREFETCH_FIFOTHRESHOLD_MAX * 3) / 8, 0x0, len, 0x1, info);
+	if (ret)
+		/* PFPW engine is busy, use cpu copy method */
+		goto out_copy;
+
+	info->buf_len = len;
+
+	enable_irq(info->gpmc_irq_count);
+	enable_irq(info->gpmc_irq_fifo);
+
+	/* waiting for write to complete */
+	wait_for_completion(&info->comp);
+
+	/* wait for data to flushed-out before reset the prefetch */
+	tim = 0;
+	limit = (loops_per_jiffy *  msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
+	do {
+		val = readl(info->reg.gpmc_prefetch_status);
+		val = PREFETCH_STATUS_COUNT(val);
+		cpu_relax();
+	} while (val && (tim++ < limit));
+
+	/* disable and stop the PFPW engine */
+	omap_prefetch_reset(info->gpmc_cs, info);
+	return;
+
+out_copy:
+	if (info->nand.options & NAND_BUSWIDTH_16)
+		omap_write_buf16(mtd, buf, len);
+	else
+		omap_write_buf8(mtd, buf, len);
 }
 
 /**
@@ -582,6 +747,8 @@ static void gen_true_ecc(u8 *ecc_buf)
  *
  * This function compares two ECC's and indicates if there is an error.
  * If the error can be corrected it will be corrected to the buffer.
+ * If there is no error, %0 is returned. If there is an error but it
+ * was corrected, %1 is returned. Otherwise, %-1 is returned.
  */
 static int omap_compare_ecc(u8 *ecc_data1,	/* read from NAND memory */
 			    u8 *ecc_data2,	/* read from register */
@@ -660,12 +827,12 @@ static int omap_compare_ecc(u8 *ecc_data1,	/* read from NAND memory */
 
 	case 1:
 		/* Uncorrectable error */
-		DEBUG(MTD_DEBUG_LEVEL0, "ECC UNCORRECTED_ERROR 1\n");
+		pr_debug("ECC UNCORRECTED_ERROR 1\n");
 		return -1;
 
 	case 11:
 		/* UN-Correctable error */
-		DEBUG(MTD_DEBUG_LEVEL0, "ECC UNCORRECTED_ERROR B\n");
+		pr_debug("ECC UNCORRECTED_ERROR B\n");
 		return -1;
 
 	case 12:
@@ -682,12 +849,12 @@ static int omap_compare_ecc(u8 *ecc_data1,	/* read from NAND memory */
 
 		find_bit = (ecc_bit[5] << 2) + (ecc_bit[3] << 1) + ecc_bit[1];
 
-		DEBUG(MTD_DEBUG_LEVEL0, "Correcting single bit ECC error at "
-				"offset: %d, bit: %d\n", find_byte, find_bit);
+		pr_debug("Correcting single bit ECC error at offset: "
+				"%d, bit: %d\n", find_byte, find_bit);
 
 		page_data[find_byte] ^= (1 << find_bit);
 
-		return 0;
+		return 1;
 	default:
 		if (isEccFF) {
 			if (ecc_data2[0] == 0 &&
@@ -695,7 +862,7 @@ static int omap_compare_ecc(u8 *ecc_data1,	/* read from NAND memory */
 			    ecc_data2[2] == 0)
 				return 0;
 		}
-		DEBUG(MTD_DEBUG_LEVEL0, "UNCORRECTED_ERROR default\n");
+		pr_debug("UNCORRECTED_ERROR default\n");
 		return -1;
 	}
 }
@@ -708,8 +875,11 @@ static int omap_compare_ecc(u8 *ecc_data1,	/* read from NAND memory */
  * @calc_ecc: ecc read from HW ECC registers
  *
  * Compares the ecc read from nand spare area with ECC registers values
- * and if ECC's mismached, it will call 'omap_compare_ecc' for error detection
- * and correction.
+ * and if ECC's mismatched, it will call 'omap_compare_ecc' for error
+ * detection and correction. If there are no errors, %0 is returned. If
+ * there were errors and all of the errors were corrected, the number of
+ * corrected errors is returned. If uncorrectable errors exist, %-1 is
+ * returned.
  */
 static int omap_correct_data(struct mtd_info *mtd, u_char *dat,
 				u_char *read_ecc, u_char *calc_ecc)
@@ -717,6 +887,7 @@ static int omap_correct_data(struct mtd_info *mtd, u_char *dat,
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 							mtd);
 	int blockCnt = 0, i = 0, ret = 0;
+	int stat = 0;
 
 	/* Ex NAND_ECC_HW12_2048 */
 	if ((info->nand.ecc.mode == NAND_ECC_HW) &&
@@ -730,12 +901,14 @@ static int omap_correct_data(struct mtd_info *mtd, u_char *dat,
 			ret = omap_compare_ecc(read_ecc, calc_ecc, dat);
 			if (ret < 0)
 				return ret;
+			/* keep track of the number of corrected errors */
+			stat += ret;
 		}
 		read_ecc += 3;
 		calc_ecc += 3;
 		dat      += 512;
 	}
-	return 0;
+	return stat;
 }
 
 /**
@@ -755,17 +928,18 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
 {
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 							mtd);
-	unsigned long val = 0x0;
-	unsigned long reg;
+	u32 val;
+
+	val = readl(info->reg.gpmc_ecc_config);
+	if (((val >> ECC_CONFIG_CS_SHIFT)  & ~CS_MASK) != info->gpmc_cs)
+		return -EINVAL;
 
-	/* Start Reading from HW ECC1_Result = 0x200 */
-	reg = (unsigned long)(info->gpmc_baseaddr + GPMC_ECC1_RESULT);
-	val = __raw_readl(reg);
+	/* read ecc result */
+	val = readl(info->reg.gpmc_ecc1_result);
 	*ecc_code++ = val;          /* P128e, ..., P1e */
 	*ecc_code++ = val >> 16;    /* P128o, ..., P1o */
 	/* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
 	*ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
-	reg += 4;
 
 	return 0;
 }
@@ -781,33 +955,35 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int mode)
 							mtd);
 	struct nand_chip *chip = mtd->priv;
 	unsigned int dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
-	unsigned long val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_CONFIG);
+	u32 val;
+
+	/* clear ecc and enable bits */
+	val = ECCCLEAR | ECC1;
+	writel(val, info->reg.gpmc_ecc_control);
+
+	/* program ecc and result sizes */
+	val = ((((info->nand.ecc.size >> 1) - 1) << ECCSIZE1_SHIFT) |
+			 ECC1RESULTSIZE);
+	writel(val, info->reg.gpmc_ecc_size_config);
 
 	switch (mode) {
 	case NAND_ECC_READ:
-		__raw_writel(0x101, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
-		/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
-		val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
+	case NAND_ECC_WRITE:
+		writel(ECCCLEAR | ECC1, info->reg.gpmc_ecc_control);
 		break;
 	case NAND_ECC_READSYN:
-		 __raw_writel(0x100, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
-		/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
-		val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
-		break;
-	case NAND_ECC_WRITE:
-		__raw_writel(0x101, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
-		/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
-		val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
+		writel(ECCCLEAR, info->reg.gpmc_ecc_control);
 		break;
 	default:
-		DEBUG(MTD_DEBUG_LEVEL0, "Error: Unrecognized Mode[%d]!\n",
-					mode);
+		dev_info(&info->pdev->dev,
+			"error: unrecognized Mode[%d]!\n", mode);
 		break;
 	}
 
-	__raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_CONFIG);
+	/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
+	val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
+	writel(val, info->reg.gpmc_ecc_config);
 }
-#endif
 
 /**
  * omap_wait - wait until the command is done
@@ -827,25 +1003,22 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip)
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 							mtd);
 	unsigned long timeo = jiffies;
-	int status = NAND_STATUS_FAIL, state = this->state;
+	int status, state = this->state;
 
 	if (state == FL_ERASING)
-		timeo += (HZ * 400) / 1000;
+		timeo += msecs_to_jiffies(400);
 	else
-		timeo += (HZ * 20) / 1000;
-
-	this->IO_ADDR_W = (void *) info->gpmc_cs_baseaddr +
-						GPMC_CS_NAND_COMMAND;
-	this->IO_ADDR_R = (void *) info->gpmc_cs_baseaddr + GPMC_CS_NAND_DATA;
-
-	__raw_writeb(NAND_CMD_STATUS & 0xFF, this->IO_ADDR_W);
+		timeo += msecs_to_jiffies(20);
 
+	writeb(NAND_CMD_STATUS & 0xFF, info->reg.gpmc_nand_command);
 	while (time_before(jiffies, timeo)) {
-		status = __raw_readb(this->IO_ADDR_R);
+		status = readb(info->reg.gpmc_nand_data);
 		if (status & NAND_STATUS_READY)
 			break;
 		cond_resched();
 	}
+
+	status = readb(info->reg.gpmc_nand_data);
 	return status;
 }
 
@@ -855,41 +1028,622 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip)
  */
 static int omap_dev_ready(struct mtd_info *mtd)
 {
+	unsigned int val = 0;
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 							mtd);
-	unsigned int val = __raw_readl(info->gpmc_baseaddr + GPMC_IRQ_STATUS);
+
+	val = readl(info->reg.gpmc_status);
 
 	if ((val & 0x100) == 0x100) {
-		/* Clear IRQ Interrupt */
-		val |= 0x100;
-		val &= ~(0x0);
-		__raw_writel(val, info->gpmc_baseaddr + GPMC_IRQ_STATUS);
+		return 1;
 	} else {
-		unsigned int cnt = 0;
-		while (cnt++ < 0x1FF) {
-			if  ((val & 0x100) == 0x100)
-				return 0;
-			val = __raw_readl(info->gpmc_baseaddr +
-							GPMC_IRQ_STATUS);
+		return 0;
+	}
+}
+
+/**
+ * omap_enable_hwecc_bch - Program GPMC to perform BCH ECC calculation
+ * @mtd: MTD device structure
+ * @mode: Read/Write mode
+ *
+ * When using BCH, sector size is hardcoded to 512 bytes.
+ * Using wrapping mode 6 both for reading and writing if ELM module not uses
+ * for error correction.
+ * On writing,
+ * eccsize0 = 0  (no additional protected byte in spare area)
+ * eccsize1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
+ */
+static void __maybe_unused omap_enable_hwecc_bch(struct mtd_info *mtd, int mode)
+{
+	unsigned int bch_type;
+	unsigned int dev_width, nsectors;
+	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+						   mtd);
+	enum omap_ecc ecc_opt = info->ecc_opt;
+	struct nand_chip *chip = mtd->priv;
+	u32 val, wr_mode;
+	unsigned int ecc_size1, ecc_size0;
+
+	/* GPMC configurations for calculating ECC */
+	switch (ecc_opt) {
+	case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
+		bch_type = 0;
+		nsectors = 1;
+		if (mode == NAND_ECC_READ) {
+			wr_mode	  = BCH_WRAPMODE_6;
+			ecc_size0 = BCH_ECC_SIZE0;
+			ecc_size1 = BCH_ECC_SIZE1;
+		} else {
+			wr_mode   = BCH_WRAPMODE_6;
+			ecc_size0 = BCH_ECC_SIZE0;
+			ecc_size1 = BCH_ECC_SIZE1;
+		}
+		break;
+	case OMAP_ECC_BCH4_CODE_HW:
+		bch_type = 0;
+		nsectors = chip->ecc.steps;
+		if (mode == NAND_ECC_READ) {
+			wr_mode	  = BCH_WRAPMODE_1;
+			ecc_size0 = BCH4R_ECC_SIZE0;
+			ecc_size1 = BCH4R_ECC_SIZE1;
+		} else {
+			wr_mode   = BCH_WRAPMODE_6;
+			ecc_size0 = BCH_ECC_SIZE0;
+			ecc_size1 = BCH_ECC_SIZE1;
+		}
+		break;
+	case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
+		bch_type = 1;
+		nsectors = 1;
+		if (mode == NAND_ECC_READ) {
+			wr_mode	  = BCH_WRAPMODE_6;
+			ecc_size0 = BCH_ECC_SIZE0;
+			ecc_size1 = BCH_ECC_SIZE1;
+		} else {
+			wr_mode   = BCH_WRAPMODE_6;
+			ecc_size0 = BCH_ECC_SIZE0;
+			ecc_size1 = BCH_ECC_SIZE1;
+		}
+		break;
+	case OMAP_ECC_BCH8_CODE_HW:
+		bch_type = 1;
+		nsectors = chip->ecc.steps;
+		if (mode == NAND_ECC_READ) {
+			wr_mode	  = BCH_WRAPMODE_1;
+			ecc_size0 = BCH8R_ECC_SIZE0;
+			ecc_size1 = BCH8R_ECC_SIZE1;
+		} else {
+			wr_mode   = BCH_WRAPMODE_6;
+			ecc_size0 = BCH_ECC_SIZE0;
+			ecc_size1 = BCH_ECC_SIZE1;
+		}
+		break;
+	case OMAP_ECC_BCH16_CODE_HW:
+		bch_type = 0x2;
+		nsectors = chip->ecc.steps;
+		if (mode == NAND_ECC_READ) {
+			wr_mode	  = 0x01;
+			ecc_size0 = 52; /* ECC bits in nibbles per sector */
+			ecc_size1 = 0;  /* non-ECC bits in nibbles per sector */
+		} else {
+			wr_mode	  = 0x01;
+			ecc_size0 = 0;  /* extra bits in nibbles per sector */
+			ecc_size1 = 52; /* OOB bits in nibbles per sector */
+		}
+		break;
+	default:
+		return;
+	}
+
+	writel(ECC1, info->reg.gpmc_ecc_control);
+
+	/* Configure ecc size for BCH */
+	val = (ecc_size1 << ECCSIZE1_SHIFT) | (ecc_size0 << ECCSIZE0_SHIFT);
+	writel(val, info->reg.gpmc_ecc_size_config);
+
+	dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
+
+	/* BCH configuration */
+	val = ((1                        << 16) | /* enable BCH */
+	       (bch_type		 << 12) | /* BCH4/BCH8/BCH16 */
+	       (wr_mode                  <<  8) | /* wrap mode */
+	       (dev_width                <<  7) | /* bus width */
+	       (((nsectors-1) & 0x7)     <<  4) | /* number of sectors */
+	       (info->gpmc_cs            <<  1) | /* ECC CS */
+	       (0x1));                            /* enable ECC */
+
+	writel(val, info->reg.gpmc_ecc_config);
+
+	/* Clear ecc and enable bits */
+	writel(ECCCLEAR | ECC1, info->reg.gpmc_ecc_control);
+}
+
+static u8  bch4_polynomial[] = {0x28, 0x13, 0xcc, 0x39, 0x96, 0xac, 0x7f};
+static u8  bch8_polynomial[] = {0xef, 0x51, 0x2e, 0x09, 0xed, 0x93, 0x9a, 0xc2,
+				0x97, 0x79, 0xe5, 0x24, 0xb5};
+
+/**
+ * omap_calculate_ecc_bch - Generate bytes of ECC bytes
+ * @mtd:	MTD device structure
+ * @dat:	The pointer to data on which ecc is computed
+ * @ecc_code:	The ecc_code buffer
+ *
+ * Support calculating of BCH4/8 ecc vectors for the page
+ */
+static int __maybe_unused omap_calculate_ecc_bch(struct mtd_info *mtd,
+					const u_char *dat, u_char *ecc_calc)
+{
+	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+						   mtd);
+	int eccbytes	= info->nand.ecc.bytes;
+	struct gpmc_nand_regs	*gpmc_regs = &info->reg;
+	u8 *ecc_code;
+	unsigned long nsectors, bch_val1, bch_val2, bch_val3, bch_val4;
+	u32 val;
+	int i, j;
+
+	nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
+	for (i = 0; i < nsectors; i++) {
+		ecc_code = ecc_calc;
+		switch (info->ecc_opt) {
+		case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
+		case OMAP_ECC_BCH8_CODE_HW:
+			bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]);
+			bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]);
+			bch_val3 = readl(gpmc_regs->gpmc_bch_result2[i]);
+			bch_val4 = readl(gpmc_regs->gpmc_bch_result3[i]);
+			*ecc_code++ = (bch_val4 & 0xFF);
+			*ecc_code++ = ((bch_val3 >> 24) & 0xFF);
+			*ecc_code++ = ((bch_val3 >> 16) & 0xFF);
+			*ecc_code++ = ((bch_val3 >> 8) & 0xFF);
+			*ecc_code++ = (bch_val3 & 0xFF);
+			*ecc_code++ = ((bch_val2 >> 24) & 0xFF);
+			*ecc_code++ = ((bch_val2 >> 16) & 0xFF);
+			*ecc_code++ = ((bch_val2 >> 8) & 0xFF);
+			*ecc_code++ = (bch_val2 & 0xFF);
+			*ecc_code++ = ((bch_val1 >> 24) & 0xFF);
+			*ecc_code++ = ((bch_val1 >> 16) & 0xFF);
+			*ecc_code++ = ((bch_val1 >> 8) & 0xFF);
+			*ecc_code++ = (bch_val1 & 0xFF);
+			break;
+		case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
+		case OMAP_ECC_BCH4_CODE_HW:
+			bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]);
+			bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]);
+			*ecc_code++ = ((bch_val2 >> 12) & 0xFF);
+			*ecc_code++ = ((bch_val2 >> 4) & 0xFF);
+			*ecc_code++ = ((bch_val2 & 0xF) << 4) |
+				((bch_val1 >> 28) & 0xF);
+			*ecc_code++ = ((bch_val1 >> 20) & 0xFF);
+			*ecc_code++ = ((bch_val1 >> 12) & 0xFF);
+			*ecc_code++ = ((bch_val1 >> 4) & 0xFF);
+			*ecc_code++ = ((bch_val1 & 0xF) << 4);
+			break;
+		case OMAP_ECC_BCH16_CODE_HW:
+			val = readl(gpmc_regs->gpmc_bch_result6[i]);
+			ecc_code[0]  = ((val >>  8) & 0xFF);
+			ecc_code[1]  = ((val >>  0) & 0xFF);
+			val = readl(gpmc_regs->gpmc_bch_result5[i]);
+			ecc_code[2]  = ((val >> 24) & 0xFF);
+			ecc_code[3]  = ((val >> 16) & 0xFF);
+			ecc_code[4]  = ((val >>  8) & 0xFF);
+			ecc_code[5]  = ((val >>  0) & 0xFF);
+			val = readl(gpmc_regs->gpmc_bch_result4[i]);
+			ecc_code[6]  = ((val >> 24) & 0xFF);
+			ecc_code[7]  = ((val >> 16) & 0xFF);
+			ecc_code[8]  = ((val >>  8) & 0xFF);
+			ecc_code[9]  = ((val >>  0) & 0xFF);
+			val = readl(gpmc_regs->gpmc_bch_result3[i]);
+			ecc_code[10] = ((val >> 24) & 0xFF);
+			ecc_code[11] = ((val >> 16) & 0xFF);
+			ecc_code[12] = ((val >>  8) & 0xFF);
+			ecc_code[13] = ((val >>  0) & 0xFF);
+			val = readl(gpmc_regs->gpmc_bch_result2[i]);
+			ecc_code[14] = ((val >> 24) & 0xFF);
+			ecc_code[15] = ((val >> 16) & 0xFF);
+			ecc_code[16] = ((val >>  8) & 0xFF);
+			ecc_code[17] = ((val >>  0) & 0xFF);
+			val = readl(gpmc_regs->gpmc_bch_result1[i]);
+			ecc_code[18] = ((val >> 24) & 0xFF);
+			ecc_code[19] = ((val >> 16) & 0xFF);
+			ecc_code[20] = ((val >>  8) & 0xFF);
+			ecc_code[21] = ((val >>  0) & 0xFF);
+			val = readl(gpmc_regs->gpmc_bch_result0[i]);
+			ecc_code[22] = ((val >> 24) & 0xFF);
+			ecc_code[23] = ((val >> 16) & 0xFF);
+			ecc_code[24] = ((val >>  8) & 0xFF);
+			ecc_code[25] = ((val >>  0) & 0xFF);
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		/* ECC scheme specific syndrome customizations */
+		switch (info->ecc_opt) {
+		case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
+			/* Add constant polynomial to remainder, so that
+			 * ECC of blank pages results in 0x0 on reading back */
+			for (j = 0; j < eccbytes; j++)
+				ecc_calc[j] ^= bch4_polynomial[j];
+			break;
+		case OMAP_ECC_BCH4_CODE_HW:
+			/* Set  8th ECC byte as 0x0 for ROM compatibility */
+			ecc_calc[eccbytes - 1] = 0x0;
+			break;
+		case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
+			/* Add constant polynomial to remainder, so that
+			 * ECC of blank pages results in 0x0 on reading back */
+			for (j = 0; j < eccbytes; j++)
+				ecc_calc[j] ^= bch8_polynomial[j];
+			break;
+		case OMAP_ECC_BCH8_CODE_HW:
+			/* Set 14th ECC byte as 0x0 for ROM compatibility */
+			ecc_calc[eccbytes - 1] = 0x0;
+			break;
+		case OMAP_ECC_BCH16_CODE_HW:
+			break;
+		default:
+			return -EINVAL;
+		}
+
+	ecc_calc += eccbytes;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_MTD_NAND_OMAP_BCH
+/**
+ * erased_sector_bitflips - count bit flips
+ * @data:	data sector buffer
+ * @oob:	oob buffer
+ * @info:	omap_nand_info
+ *
+ * Check the bit flips in erased page falls below correctable level.
+ * If falls below, report the page as erased with correctable bit
+ * flip, else report as uncorrectable page.
+ */
+static int erased_sector_bitflips(u_char *data, u_char *oob,
+		struct omap_nand_info *info)
+{
+	int flip_bits = 0, i;
+
+	for (i = 0; i < info->nand.ecc.size; i++) {
+		flip_bits += hweight8(~data[i]);
+		if (flip_bits > info->nand.ecc.strength)
+			return 0;
+	}
+
+	for (i = 0; i < info->nand.ecc.bytes - 1; i++) {
+		flip_bits += hweight8(~oob[i]);
+		if (flip_bits > info->nand.ecc.strength)
+			return 0;
+	}
+
+	/*
+	 * Bit flips falls in correctable level.
+	 * Fill data area with 0xFF
+	 */
+	if (flip_bits) {
+		memset(data, 0xFF, info->nand.ecc.size);
+		memset(oob, 0xFF, info->nand.ecc.bytes);
+	}
+
+	return flip_bits;
+}
+
+/**
+ * omap_elm_correct_data - corrects page data area in case error reported
+ * @mtd:	MTD device structure
+ * @data:	page data
+ * @read_ecc:	ecc read from nand flash
+ * @calc_ecc:	ecc read from HW ECC registers
+ *
+ * Calculated ecc vector reported as zero in case of non-error pages.
+ * In case of non-zero ecc vector, first filter out erased-pages, and
+ * then process data via ELM to detect bit-flips.
+ */
+static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data,
+				u_char *read_ecc, u_char *calc_ecc)
+{
+	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+			mtd);
+	struct nand_ecc_ctrl *ecc = &info->nand.ecc;
+	int eccsteps = info->nand.ecc.steps;
+	int i , j, stat = 0;
+	int eccflag, actual_eccbytes;
+	struct elm_errorvec err_vec[ERROR_VECTOR_MAX];
+	u_char *ecc_vec = calc_ecc;
+	u_char *spare_ecc = read_ecc;
+	u_char *erased_ecc_vec;
+	u_char *buf;
+	int bitflip_count;
+	bool is_error_reported = false;
+	u32 bit_pos, byte_pos, error_max, pos;
+	int err;
+
+	switch (info->ecc_opt) {
+	case OMAP_ECC_BCH4_CODE_HW:
+		/* omit  7th ECC byte reserved for ROM code compatibility */
+		actual_eccbytes = ecc->bytes - 1;
+		erased_ecc_vec = bch4_vector;
+		break;
+	case OMAP_ECC_BCH8_CODE_HW:
+		/* omit 14th ECC byte reserved for ROM code compatibility */
+		actual_eccbytes = ecc->bytes - 1;
+		erased_ecc_vec = bch8_vector;
+		break;
+	case OMAP_ECC_BCH16_CODE_HW:
+		actual_eccbytes = ecc->bytes;
+		erased_ecc_vec = bch16_vector;
+		break;
+	default:
+		pr_err("invalid driver configuration\n");
+		return -EINVAL;
+	}
+
+	/* Initialize elm error vector to zero */
+	memset(err_vec, 0, sizeof(err_vec));
+
+	for (i = 0; i < eccsteps ; i++) {
+		eccflag = 0;	/* initialize eccflag */
+
+		/*
+		 * Check any error reported,
+		 * In case of error, non zero ecc reported.
+		 */
+		for (j = 0; j < actual_eccbytes; j++) {
+			if (calc_ecc[j] != 0) {
+				eccflag = 1; /* non zero ecc, error present */
+				break;
+			}
+		}
+
+		if (eccflag == 1) {
+			if (memcmp(calc_ecc, erased_ecc_vec,
+						actual_eccbytes) == 0) {
+				/*
+				 * calc_ecc[] matches pattern for ECC(all 0xff)
+				 * so this is definitely an erased-page
+				 */
+			} else {
+				buf = &data[info->nand.ecc.size * i];
+				/*
+				 * count number of 0-bits in read_buf.
+				 * This check can be removed once a similar
+				 * check is introduced in generic NAND driver
+				 */
+				bitflip_count = erased_sector_bitflips(
+						buf, read_ecc, info);
+				if (bitflip_count) {
+					/*
+					 * number of 0-bits within ECC limits
+					 * So this may be an erased-page
+					 */
+					stat += bitflip_count;
+				} else {
+					/*
+					 * Too many 0-bits. It may be a
+					 * - programmed-page, OR
+					 * - erased-page with many bit-flips
+					 * So this page requires check by ELM
+					 */
+					err_vec[i].error_reported = true;
+					is_error_reported = true;
+				}
+			}
 		}
+
+		/* Update the ecc vector */
+		calc_ecc += ecc->bytes;
+		read_ecc += ecc->bytes;
 	}
 
-	return 1;
+	/* Check if any error reported */
+	if (!is_error_reported)
+		return stat;
+
+	/* Decode BCH error using ELM module */
+	elm_decode_bch_error_page(info->elm_dev, ecc_vec, err_vec);
+
+	err = 0;
+	for (i = 0; i < eccsteps; i++) {
+		if (err_vec[i].error_uncorrectable) {
+			pr_err("nand: uncorrectable bit-flips found\n");
+			err = -EBADMSG;
+		} else if (err_vec[i].error_reported) {
+			for (j = 0; j < err_vec[i].error_count; j++) {
+				switch (info->ecc_opt) {
+				case OMAP_ECC_BCH4_CODE_HW:
+					/* Add 4 bits to take care of padding */
+					pos = err_vec[i].error_loc[j] +
+						BCH4_BIT_PAD;
+					break;
+				case OMAP_ECC_BCH8_CODE_HW:
+				case OMAP_ECC_BCH16_CODE_HW:
+					pos = err_vec[i].error_loc[j];
+					break;
+				default:
+					return -EINVAL;
+				}
+				error_max = (ecc->size + actual_eccbytes) * 8;
+				/* Calculate bit position of error */
+				bit_pos = pos % 8;
+
+				/* Calculate byte position of error */
+				byte_pos = (error_max - pos - 1) / 8;
+
+				if (pos < error_max) {
+					if (byte_pos < 512) {
+						pr_debug("bitflip@dat[%d]=%x\n",
+						     byte_pos, data[byte_pos]);
+						data[byte_pos] ^= 1 << bit_pos;
+					} else {
+						pr_debug("bitflip@oob[%d]=%x\n",
+							(byte_pos - 512),
+						     spare_ecc[byte_pos - 512]);
+						spare_ecc[byte_pos - 512] ^=
+							1 << bit_pos;
+					}
+				} else {
+					pr_err("invalid bit-flip @ %d:%d\n",
+							 byte_pos, bit_pos);
+					err = -EBADMSG;
+				}
+			}
+		}
+
+		/* Update number of correctable errors */
+		stat += err_vec[i].error_count;
+
+		/* Update page data with sector size */
+		data += ecc->size;
+		spare_ecc += ecc->bytes;
+	}
+
+	return (err) ? err : stat;
+}
+
+/**
+ * omap_write_page_bch - BCH ecc based write page function for entire page
+ * @mtd:		mtd info structure
+ * @chip:		nand chip info structure
+ * @buf:		data buffer
+ * @oob_required:	must write chip->oob_poi to OOB
+ *
+ * Custom write page method evolved to support multi sector writing in one shot
+ */
+static int omap_write_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
+				  const uint8_t *buf, int oob_required)
+{
+	int i;
+	uint8_t *ecc_calc = chip->buffers->ecccalc;
+	uint32_t *eccpos = chip->ecc.layout->eccpos;
+
+	/* Enable GPMC ecc engine */
+	chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
+
+	/* Write data */
+	chip->write_buf(mtd, buf, mtd->writesize);
+
+	/* Update ecc vector from GPMC result registers */
+	chip->ecc.calculate(mtd, buf, &ecc_calc[0]);
+
+	for (i = 0; i < chip->ecc.total; i++)
+		chip->oob_poi[eccpos[i]] = ecc_calc[i];
+
+	/* Write ecc vector to OOB area */
+	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+	return 0;
 }
 
-static int __devinit omap_nand_probe(struct platform_device *pdev)
+/**
+ * omap_read_page_bch - BCH ecc based page read function for entire page
+ * @mtd:		mtd info structure
+ * @chip:		nand chip info structure
+ * @buf:		buffer to store read data
+ * @oob_required:	caller requires OOB data read to chip->oob_poi
+ * @page:		page number to read
+ *
+ * For BCH ecc scheme, GPMC used for syndrome calculation and ELM module
+ * used for error correction.
+ * Custom method evolved to support ELM error correction & multi sector
+ * reading. On reading page data area is read along with OOB data with
+ * ecc engine enabled. ecc vector updated after read of OOB data.
+ * For non error pages ecc vector reported as zero.
+ */
+static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
+				uint8_t *buf, int oob_required, int page)
+{
+	uint8_t *ecc_calc = chip->buffers->ecccalc;
+	uint8_t *ecc_code = chip->buffers->ecccode;
+	uint32_t *eccpos = chip->ecc.layout->eccpos;
+	uint8_t *oob = &chip->oob_poi[eccpos[0]];
+	uint32_t oob_pos = mtd->writesize + chip->ecc.layout->eccpos[0];
+	int stat;
+	unsigned int max_bitflips = 0;
+
+	/* Enable GPMC ecc engine */
+	chip->ecc.hwctl(mtd, NAND_ECC_READ);
+
+	/* Read data */
+	chip->read_buf(mtd, buf, mtd->writesize);
+
+	/* Read oob bytes */
+	chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, -1);
+	chip->read_buf(mtd, oob, chip->ecc.total);
+
+	/* Calculate ecc bytes */
+	chip->ecc.calculate(mtd, buf, ecc_calc);
+
+	memcpy(ecc_code, &chip->oob_poi[eccpos[0]], chip->ecc.total);
+
+	stat = chip->ecc.correct(mtd, buf, ecc_code, ecc_calc);
+
+	if (stat < 0) {
+		mtd->ecc_stats.failed++;
+	} else {
+		mtd->ecc_stats.corrected += stat;
+		max_bitflips = max_t(unsigned int, max_bitflips, stat);
+	}
+
+	return max_bitflips;
+}
+
+/**
+ * is_elm_present - checks for presence of ELM module by scanning DT nodes
+ * @omap_nand_info: NAND device structure containing platform data
+ * @bch_type: 0x0=BCH4, 0x1=BCH8, 0x2=BCH16
+ */
+static int is_elm_present(struct omap_nand_info *info,
+			struct device_node *elm_node, enum bch_ecc bch_type)
+{
+	struct platform_device *pdev;
+	struct nand_ecc_ctrl *ecc = &info->nand.ecc;
+	int err;
+	/* check whether elm-id is passed via DT */
+	if (!elm_node) {
+		pr_err("nand: error: ELM DT node not found\n");
+		return -ENODEV;
+	}
+	pdev = of_find_device_by_node(elm_node);
+	/* check whether ELM device is registered */
+	if (!pdev) {
+		pr_err("nand: error: ELM device not found\n");
+		return -ENODEV;
+	}
+	/* ELM module available, now configure it */
+	info->elm_dev = &pdev->dev;
+	err = elm_config(info->elm_dev, bch_type,
+		(info->mtd.writesize / ecc->size), ecc->size, ecc->bytes);
+
+	return err;
+}
+#endif /* CONFIG_MTD_NAND_ECC_BCH */
+
+static int omap_nand_probe(struct platform_device *pdev)
 {
 	struct omap_nand_info		*info;
 	struct omap_nand_platform_data	*pdata;
+	struct mtd_info			*mtd;
+	struct nand_chip		*nand_chip;
+	struct nand_ecclayout		*ecclayout;
 	int				err;
-
-	pdata = pdev->dev.platform_data;
+	int				i;
+	dma_cap_mask_t			mask;
+	unsigned			sig;
+	unsigned			oob_index;
+	struct resource			*res;
+	struct mtd_part_parser_data	ppdata = {};
+
+	pdata = dev_get_platdata(&pdev->dev);
 	if (pdata == NULL) {
 		dev_err(&pdev->dev, "platform data missing\n");
 		return -ENODEV;
 	}
 
-	info = kzalloc(sizeof(struct omap_nand_info), GFP_KERNEL);
+	info = devm_kzalloc(&pdev->dev, sizeof(struct omap_nand_info),
+				GFP_KERNEL);
 	if (!info)
 		return -ENOMEM;
 
@@ -898,150 +1652,413 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
 	spin_lock_init(&info->controller.lock);
 	init_waitqueue_head(&info->controller.wq);
 
-	info->pdev = pdev;
-
+	info->pdev		= pdev;
 	info->gpmc_cs		= pdata->cs;
-	info->gpmc_baseaddr	= pdata->gpmc_baseaddr;
-	info->gpmc_cs_baseaddr	= pdata->gpmc_cs_baseaddr;
-	info->phys_base		= pdata->phys_base;
-
-	info->mtd.priv		= &info->nand;
-	info->mtd.name		= dev_name(&pdev->dev);
-	info->mtd.owner		= THIS_MODULE;
+	info->reg		= pdata->reg;
+	info->of_node		= pdata->of_node;
+	info->ecc_opt		= pdata->ecc_opt;
+	mtd			= &info->mtd;
+	mtd->priv		= &info->nand;
+	mtd->name		= dev_name(&pdev->dev);
+	mtd->owner		= THIS_MODULE;
+	nand_chip		= &info->nand;
+	nand_chip->ecc.priv	= NULL;
+	nand_chip->options	|= NAND_SKIP_BBTSCAN;
 
-	info->nand.options	|= pdata->devsize ? NAND_BUSWIDTH_16 : 0;
-	info->nand.options	|= NAND_SKIP_BBTSCAN;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	nand_chip->IO_ADDR_R = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(nand_chip->IO_ADDR_R))
+		return PTR_ERR(nand_chip->IO_ADDR_R);
 
-	/* NAND write protect off */
-	omap_nand_wp(&info->mtd, NAND_WP_OFF);
+	info->phys_base = res->start;
 
-	if (!request_mem_region(info->phys_base, NAND_IO_SIZE,
-				pdev->dev.driver->name)) {
-		err = -EBUSY;
-		goto out_free_info;
-	}
-
-	info->nand.IO_ADDR_R = ioremap(info->phys_base, NAND_IO_SIZE);
-	if (!info->nand.IO_ADDR_R) {
-		err = -ENOMEM;
-		goto out_release_mem_region;
-	}
+	nand_chip->controller = &info->controller;
 
-	info->nand.controller = &info->controller;
-
-	info->nand.IO_ADDR_W = info->nand.IO_ADDR_R;
-	info->nand.cmd_ctrl  = omap_hwcontrol;
+	nand_chip->IO_ADDR_W = nand_chip->IO_ADDR_R;
+	nand_chip->cmd_ctrl  = omap_hwcontrol;
 
 	/*
 	 * If RDY/BSY line is connected to OMAP then use the omap ready
-	 * funcrtion and the generic nand_wait function which reads the status
-	 * register after monitoring the RDY/BSY line.Otherwise use a standard
+	 * function and the generic nand_wait function which reads the status
+	 * register after monitoring the RDY/BSY line. Otherwise use a standard
 	 * chip delay which is slightly more than tR (AC Timing) of the NAND
 	 * device and read status register until you get a failure or success
 	 */
 	if (pdata->dev_ready) {
-		info->nand.dev_ready = omap_dev_ready;
-		info->nand.chip_delay = 0;
+		nand_chip->dev_ready = omap_dev_ready;
+		nand_chip->chip_delay = 0;
 	} else {
-		info->nand.waitfunc = omap_wait;
-		info->nand.chip_delay = 50;
+		nand_chip->waitfunc = omap_wait;
+		nand_chip->chip_delay = 50;
 	}
 
-	if (use_prefetch) {
-		/* copy the virtual address of nand base for fifo access */
-		info->nand_pref_fifo_add = info->nand.IO_ADDR_R;
-
-		info->nand.read_buf   = omap_read_buf_pref;
-		info->nand.write_buf  = omap_write_buf_pref;
-		if (use_dma) {
-			err = omap_request_dma(OMAP24XX_DMA_GPMC, "NAND",
-				omap_nand_dma_cb, &info->comp, &info->dma_ch);
-			if (err < 0) {
-				info->dma_ch = -1;
-				printk(KERN_WARNING "DMA request failed."
-					" Non-dma data transfer mode\n");
-			} else {
-				omap_set_dma_dest_burst_mode(info->dma_ch,
-						OMAP_DMA_DATA_BURST_16);
-				omap_set_dma_src_burst_mode(info->dma_ch,
-						OMAP_DMA_DATA_BURST_16);
+	/* scan NAND device connected to chip controller */
+	nand_chip->options |= pdata->devsize & NAND_BUSWIDTH_16;
+	if (nand_scan_ident(mtd, 1, NULL)) {
+		pr_err("nand device scan failed, may be bus-width mismatch\n");
+		err = -ENXIO;
+		goto return_error;
+	}
+
+	/* check for small page devices */
+	if ((mtd->oobsize < 64) && (pdata->ecc_opt != OMAP_ECC_HAM1_CODE_HW)) {
+		pr_err("small page devices are not supported\n");
+		err = -EINVAL;
+		goto return_error;
+	}
 
-				info->nand.read_buf   = omap_read_buf_dma_pref;
-				info->nand.write_buf  = omap_write_buf_dma_pref;
+	/* re-populate low-level callbacks based on xfer modes */
+	switch (pdata->xfer_type) {
+	case NAND_OMAP_PREFETCH_POLLED:
+		nand_chip->read_buf   = omap_read_buf_pref;
+		nand_chip->write_buf  = omap_write_buf_pref;
+		break;
+
+	case NAND_OMAP_POLLED:
+		/* Use nand_base defaults for {read,write}_buf */
+		break;
+
+	case NAND_OMAP_PREFETCH_DMA:
+		dma_cap_zero(mask);
+		dma_cap_set(DMA_SLAVE, mask);
+		sig = OMAP24XX_DMA_GPMC;
+		info->dma = dma_request_channel(mask, omap_dma_filter_fn, &sig);
+		if (!info->dma) {
+			dev_err(&pdev->dev, "DMA engine request failed\n");
+			err = -ENXIO;
+			goto return_error;
+		} else {
+			struct dma_slave_config cfg;
+
+			memset(&cfg, 0, sizeof(cfg));
+			cfg.src_addr = info->phys_base;
+			cfg.dst_addr = info->phys_base;
+			cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+			cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+			cfg.src_maxburst = 16;
+			cfg.dst_maxburst = 16;
+			err = dmaengine_slave_config(info->dma, &cfg);
+			if (err) {
+				dev_err(&pdev->dev, "DMA engine slave config failed: %d\n",
+					err);
+				goto return_error;
 			}
+			nand_chip->read_buf   = omap_read_buf_dma_pref;
+			nand_chip->write_buf  = omap_write_buf_dma_pref;
 		}
-	} else {
-		if (info->nand.options & NAND_BUSWIDTH_16) {
-			info->nand.read_buf   = omap_read_buf16;
-			info->nand.write_buf  = omap_write_buf16;
-		} else {
-			info->nand.read_buf   = omap_read_buf8;
-			info->nand.write_buf  = omap_write_buf8;
+		break;
+
+	case NAND_OMAP_PREFETCH_IRQ:
+		info->gpmc_irq_fifo = platform_get_irq(pdev, 0);
+		if (info->gpmc_irq_fifo <= 0) {
+			dev_err(&pdev->dev, "error getting fifo irq\n");
+			err = -ENODEV;
+			goto return_error;
+		}
+		err = devm_request_irq(&pdev->dev, info->gpmc_irq_fifo,
+					omap_nand_irq, IRQF_SHARED,
+					"gpmc-nand-fifo", info);
+		if (err) {
+			dev_err(&pdev->dev, "requesting irq(%d) error:%d",
+						info->gpmc_irq_fifo, err);
+			info->gpmc_irq_fifo = 0;
+			goto return_error;
 		}
+
+		info->gpmc_irq_count = platform_get_irq(pdev, 1);
+		if (info->gpmc_irq_count <= 0) {
+			dev_err(&pdev->dev, "error getting count irq\n");
+			err = -ENODEV;
+			goto return_error;
+		}
+		err = devm_request_irq(&pdev->dev, info->gpmc_irq_count,
+					omap_nand_irq, IRQF_SHARED,
+					"gpmc-nand-count", info);
+		if (err) {
+			dev_err(&pdev->dev, "requesting irq(%d) error:%d",
+						info->gpmc_irq_count, err);
+			info->gpmc_irq_count = 0;
+			goto return_error;
+		}
+
+		nand_chip->read_buf  = omap_read_buf_irq_pref;
+		nand_chip->write_buf = omap_write_buf_irq_pref;
+
+		break;
+
+	default:
+		dev_err(&pdev->dev,
+			"xfer_type(%d) not supported!\n", pdata->xfer_type);
+		err = -EINVAL;
+		goto return_error;
 	}
-	info->nand.verify_buf = omap_verify_buf;
-
-#ifdef CONFIG_MTD_NAND_OMAP_HWECC
-	info->nand.ecc.bytes		= 3;
-	info->nand.ecc.size		= 512;
-	info->nand.ecc.calculate	= omap_calculate_ecc;
-	info->nand.ecc.hwctl		= omap_enable_hwecc;
-	info->nand.ecc.correct		= omap_correct_data;
-	info->nand.ecc.mode		= NAND_ECC_HW;
-
-	/* init HW ECC */
-	omap_hwecc_init(&info->mtd);
+
+	/* populate MTD interface based on ECC scheme */
+	nand_chip->ecc.layout	= &omap_oobinfo;
+	ecclayout		= &omap_oobinfo;
+	switch (info->ecc_opt) {
+	case OMAP_ECC_HAM1_CODE_HW:
+		pr_info("nand: using OMAP_ECC_HAM1_CODE_HW\n");
+		nand_chip->ecc.mode             = NAND_ECC_HW;
+		nand_chip->ecc.bytes            = 3;
+		nand_chip->ecc.size             = 512;
+		nand_chip->ecc.strength         = 1;
+		nand_chip->ecc.calculate        = omap_calculate_ecc;
+		nand_chip->ecc.hwctl            = omap_enable_hwecc;
+		nand_chip->ecc.correct          = omap_correct_data;
+		/* define ECC layout */
+		ecclayout->eccbytes		= nand_chip->ecc.bytes *
+							(mtd->writesize /
+							nand_chip->ecc.size);
+		if (nand_chip->options & NAND_BUSWIDTH_16)
+			oob_index		= BADBLOCK_MARKER_LENGTH;
+		else
+			oob_index		= 1;
+		for (i = 0; i < ecclayout->eccbytes; i++, oob_index++)
+			ecclayout->eccpos[i]	= oob_index;
+		/* no reserved-marker in ecclayout for this ecc-scheme */
+		ecclayout->oobfree->offset	=
+				ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
+		break;
+
+	case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
+#ifdef CONFIG_MTD_NAND_ECC_BCH
+		pr_info("nand: using OMAP_ECC_BCH4_CODE_HW_DETECTION_SW\n");
+		nand_chip->ecc.mode		= NAND_ECC_HW;
+		nand_chip->ecc.size		= 512;
+		nand_chip->ecc.bytes		= 7;
+		nand_chip->ecc.strength		= 4;
+		nand_chip->ecc.hwctl		= omap_enable_hwecc_bch;
+		nand_chip->ecc.correct		= nand_bch_correct_data;
+		nand_chip->ecc.calculate	= omap_calculate_ecc_bch;
+		/* define ECC layout */
+		ecclayout->eccbytes		= nand_chip->ecc.bytes *
+							(mtd->writesize /
+							nand_chip->ecc.size);
+		oob_index			= BADBLOCK_MARKER_LENGTH;
+		for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) {
+			ecclayout->eccpos[i] = oob_index;
+			if (((i + 1) % nand_chip->ecc.bytes) == 0)
+				oob_index++;
+		}
+		/* include reserved-marker in ecclayout->oobfree calculation */
+		ecclayout->oobfree->offset	= 1 +
+				ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
+		/* software bch library is used for locating errors */
+		nand_chip->ecc.priv		= nand_bch_init(mtd,
+							nand_chip->ecc.size,
+							nand_chip->ecc.bytes,
+							&nand_chip->ecc.layout);
+		if (!nand_chip->ecc.priv) {
+			pr_err("nand: error: unable to use s/w BCH library\n");
+			err = -EINVAL;
+		}
+		break;
 #else
-	info->nand.ecc.mode = NAND_ECC_SOFT;
+		pr_err("nand: error: CONFIG_MTD_NAND_ECC_BCH not enabled\n");
+		err = -EINVAL;
+		goto return_error;
 #endif
 
-	/* DIP switches on some boards change between 8 and 16 bit
-	 * bus widths for flash.  Try the other width if the first try fails.
-	 */
-	if (nand_scan(&info->mtd, 1)) {
-		info->nand.options ^= NAND_BUSWIDTH_16;
-		if (nand_scan(&info->mtd, 1)) {
-			err = -ENXIO;
-			goto out_release_mem_region;
+	case OMAP_ECC_BCH4_CODE_HW:
+#ifdef CONFIG_MTD_NAND_OMAP_BCH
+		pr_info("nand: using OMAP_ECC_BCH4_CODE_HW ECC scheme\n");
+		nand_chip->ecc.mode		= NAND_ECC_HW;
+		nand_chip->ecc.size		= 512;
+		/* 14th bit is kept reserved for ROM-code compatibility */
+		nand_chip->ecc.bytes		= 7 + 1;
+		nand_chip->ecc.strength		= 4;
+		nand_chip->ecc.hwctl		= omap_enable_hwecc_bch;
+		nand_chip->ecc.correct		= omap_elm_correct_data;
+		nand_chip->ecc.calculate	= omap_calculate_ecc_bch;
+		nand_chip->ecc.read_page	= omap_read_page_bch;
+		nand_chip->ecc.write_page	= omap_write_page_bch;
+		/* define ECC layout */
+		ecclayout->eccbytes		= nand_chip->ecc.bytes *
+							(mtd->writesize /
+							nand_chip->ecc.size);
+		oob_index			= BADBLOCK_MARKER_LENGTH;
+		for (i = 0; i < ecclayout->eccbytes; i++, oob_index++)
+			ecclayout->eccpos[i]	= oob_index;
+		/* reserved marker already included in ecclayout->eccbytes */
+		ecclayout->oobfree->offset	=
+				ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
+		/* This ECC scheme requires ELM H/W block */
+		if (is_elm_present(info, pdata->elm_of_node, BCH4_ECC) < 0) {
+			pr_err("nand: error: could not initialize ELM\n");
+			err = -ENODEV;
+			goto return_error;
 		}
-	}
+		break;
+#else
+		pr_err("nand: error: CONFIG_MTD_NAND_OMAP_BCH not enabled\n");
+		err = -EINVAL;
+		goto return_error;
+#endif
 
-#ifdef CONFIG_MTD_PARTITIONS
-	err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0);
-	if (err > 0)
-		add_mtd_partitions(&info->mtd, info->parts, err);
-	else if (pdata->parts)
-		add_mtd_partitions(&info->mtd, pdata->parts, pdata->nr_parts);
-	else
+	case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
+#ifdef CONFIG_MTD_NAND_ECC_BCH
+		pr_info("nand: using OMAP_ECC_BCH8_CODE_HW_DETECTION_SW\n");
+		nand_chip->ecc.mode		= NAND_ECC_HW;
+		nand_chip->ecc.size		= 512;
+		nand_chip->ecc.bytes		= 13;
+		nand_chip->ecc.strength		= 8;
+		nand_chip->ecc.hwctl		= omap_enable_hwecc_bch;
+		nand_chip->ecc.correct		= nand_bch_correct_data;
+		nand_chip->ecc.calculate	= omap_calculate_ecc_bch;
+		/* define ECC layout */
+		ecclayout->eccbytes		= nand_chip->ecc.bytes *
+							(mtd->writesize /
+							nand_chip->ecc.size);
+		oob_index			= BADBLOCK_MARKER_LENGTH;
+		for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) {
+			ecclayout->eccpos[i] = oob_index;
+			if (((i + 1) % nand_chip->ecc.bytes) == 0)
+				oob_index++;
+		}
+		/* include reserved-marker in ecclayout->oobfree calculation */
+		ecclayout->oobfree->offset	= 1 +
+				ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
+		/* software bch library is used for locating errors */
+		nand_chip->ecc.priv		= nand_bch_init(mtd,
+							nand_chip->ecc.size,
+							nand_chip->ecc.bytes,
+							&nand_chip->ecc.layout);
+		if (!nand_chip->ecc.priv) {
+			pr_err("nand: error: unable to use s/w BCH library\n");
+			err = -EINVAL;
+			goto return_error;
+		}
+		break;
+#else
+		pr_err("nand: error: CONFIG_MTD_NAND_ECC_BCH not enabled\n");
+		err = -EINVAL;
+		goto return_error;
 #endif
-		add_mtd_device(&info->mtd);
 
-	platform_set_drvdata(pdev, &info->mtd);
+	case OMAP_ECC_BCH8_CODE_HW:
+#ifdef CONFIG_MTD_NAND_OMAP_BCH
+		pr_info("nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme\n");
+		nand_chip->ecc.mode		= NAND_ECC_HW;
+		nand_chip->ecc.size		= 512;
+		/* 14th bit is kept reserved for ROM-code compatibility */
+		nand_chip->ecc.bytes		= 13 + 1;
+		nand_chip->ecc.strength		= 8;
+		nand_chip->ecc.hwctl		= omap_enable_hwecc_bch;
+		nand_chip->ecc.correct		= omap_elm_correct_data;
+		nand_chip->ecc.calculate	= omap_calculate_ecc_bch;
+		nand_chip->ecc.read_page	= omap_read_page_bch;
+		nand_chip->ecc.write_page	= omap_write_page_bch;
+		/* This ECC scheme requires ELM H/W block */
+		err = is_elm_present(info, pdata->elm_of_node, BCH8_ECC);
+		if (err < 0) {
+			pr_err("nand: error: could not initialize ELM\n");
+			goto return_error;
+		}
+		/* define ECC layout */
+		ecclayout->eccbytes		= nand_chip->ecc.bytes *
+							(mtd->writesize /
+							nand_chip->ecc.size);
+		oob_index			= BADBLOCK_MARKER_LENGTH;
+		for (i = 0; i < ecclayout->eccbytes; i++, oob_index++)
+			ecclayout->eccpos[i]	= oob_index;
+		/* reserved marker already included in ecclayout->eccbytes */
+		ecclayout->oobfree->offset	=
+				ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
+		break;
+#else
+		pr_err("nand: error: CONFIG_MTD_NAND_OMAP_BCH not enabled\n");
+		err = -EINVAL;
+		goto return_error;
+#endif
 
-	return 0;
+	case OMAP_ECC_BCH16_CODE_HW:
+#ifdef CONFIG_MTD_NAND_OMAP_BCH
+		pr_info("using OMAP_ECC_BCH16_CODE_HW ECC scheme\n");
+		nand_chip->ecc.mode		= NAND_ECC_HW;
+		nand_chip->ecc.size		= 512;
+		nand_chip->ecc.bytes		= 26;
+		nand_chip->ecc.strength		= 16;
+		nand_chip->ecc.hwctl		= omap_enable_hwecc_bch;
+		nand_chip->ecc.correct		= omap_elm_correct_data;
+		nand_chip->ecc.calculate	= omap_calculate_ecc_bch;
+		nand_chip->ecc.read_page	= omap_read_page_bch;
+		nand_chip->ecc.write_page	= omap_write_page_bch;
+		/* This ECC scheme requires ELM H/W block */
+		err = is_elm_present(info, pdata->elm_of_node, BCH16_ECC);
+		if (err < 0) {
+			pr_err("ELM is required for this ECC scheme\n");
+			goto return_error;
+		}
+		/* define ECC layout */
+		ecclayout->eccbytes		= nand_chip->ecc.bytes *
+							(mtd->writesize /
+							nand_chip->ecc.size);
+		oob_index			= BADBLOCK_MARKER_LENGTH;
+		for (i = 0; i < ecclayout->eccbytes; i++, oob_index++)
+			ecclayout->eccpos[i]	= oob_index;
+		/* reserved marker already included in ecclayout->eccbytes */
+		ecclayout->oobfree->offset	=
+				ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
+		break;
+#else
+		pr_err("nand: error: CONFIG_MTD_NAND_OMAP_BCH not enabled\n");
+		err = -EINVAL;
+		goto return_error;
+#endif
+	default:
+		pr_err("nand: error: invalid or unsupported ECC scheme\n");
+		err = -EINVAL;
+		goto return_error;
+	}
+
+	/* all OOB bytes from oobfree->offset till end off OOB are free */
+	ecclayout->oobfree->length = mtd->oobsize - ecclayout->oobfree->offset;
+	/* check if NAND device's OOB is enough to store ECC signatures */
+	if (mtd->oobsize < (ecclayout->eccbytes + BADBLOCK_MARKER_LENGTH)) {
+		pr_err("not enough OOB bytes required = %d, available=%d\n",
+					   ecclayout->eccbytes, mtd->oobsize);
+		err = -EINVAL;
+		goto return_error;
+	}
+
+	/* second phase scan */
+	if (nand_scan_tail(mtd)) {
+		err = -ENXIO;
+		goto return_error;
+	}
 
-out_release_mem_region:
-	release_mem_region(info->phys_base, NAND_IO_SIZE);
-out_free_info:
-	kfree(info);
+	ppdata.of_node = pdata->of_node;
+	mtd_device_parse_register(mtd, NULL, &ppdata, pdata->parts,
+				  pdata->nr_parts);
 
+	platform_set_drvdata(pdev, mtd);
+
+	return 0;
+
+return_error:
+	if (info->dma)
+		dma_release_channel(info->dma);
+	if (nand_chip->ecc.priv) {
+		nand_bch_free(nand_chip->ecc.priv);
+		nand_chip->ecc.priv = NULL;
+	}
 	return err;
 }
 
 static int omap_nand_remove(struct platform_device *pdev)
 {
 	struct mtd_info *mtd = platform_get_drvdata(pdev);
+	struct nand_chip *nand_chip = mtd->priv;
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 							mtd);
-
-	platform_set_drvdata(pdev, NULL);
-	if (use_dma)
-		omap_free_dma(info->dma_ch);
-
-	/* Release NAND device, its internal structures and partitions */
-	nand_release(&info->mtd);
-	iounmap(info->nand_pref_fifo_add);
-	kfree(&info->mtd);
+	if (nand_chip->ecc.priv) {
+		nand_bch_free(nand_chip->ecc.priv);
+		nand_chip->ecc.priv = NULL;
+	}
+	if (info->dma)
+		dma_release_channel(info->dma);
+	nand_release(mtd);
 	return 0;
 }
 
@@ -1054,29 +2071,8 @@ static struct platform_driver omap_nand_driver = {
 	},
 };
 
-static int __init omap_nand_init(void)
-{
-	printk(KERN_INFO "%s driver initializing\n", DRIVER_NAME);
-
-	/* This check is required if driver is being
-	 * loaded run time as a module
-	 */
-	if ((1 == use_dma) && (0 == use_prefetch)) {
-		printk(KERN_INFO"Wrong parameters: 'use_dma' can not be 1 "
-				"without use_prefetch'. Prefetch will not be"
-				" used in either mode (mpu or dma)\n");
-	}
-	return platform_driver_register(&omap_nand_driver);
-}
-
-static void __exit omap_nand_exit(void)
-{
-	platform_driver_unregister(&omap_nand_driver);
-}
-
-module_init(omap_nand_init);
-module_exit(omap_nand_exit);
+module_platform_driver(omap_nand_driver);
 
-MODULE_ALIAS(DRIVER_NAME);
+MODULE_ALIAS("platform:" DRIVER_NAME);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Glue layer for NAND flash on TI OMAP boards");
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index da6e7534305..471b4df3a5a 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -13,17 +13,15 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/clk.h>
+#include <linux/err.h>
 #include <asm/io.h>
 #include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <plat/orion_nand.h>
-
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-static const char *part_probes[] = { "cmdlinepart", NULL };
-#endif
+#include <linux/platform_data/mtd-orion_nand.h>
 
 static void orion_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
@@ -78,19 +76,17 @@ static void orion_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
 static int __init orion_nand_probe(struct platform_device *pdev)
 {
 	struct mtd_info *mtd;
+	struct mtd_part_parser_data ppdata = {};
 	struct nand_chip *nc;
 	struct orion_nand_data *board;
 	struct resource *res;
+	struct clk *clk;
 	void __iomem *io_base;
 	int ret = 0;
-#ifdef CONFIG_MTD_PARTITIONS
-	struct mtd_partition *partitions = NULL;
-	int num_part = 0;
-#endif
+	u32 val = 0;
 
 	nc = kzalloc(sizeof(struct nand_chip) + sizeof(struct mtd_info), GFP_KERNEL);
 	if (!nc) {
-		printk(KERN_ERR "orion_nand: failed to allocate device structure.\n");
 		ret = -ENOMEM;
 		goto no_res;
 	}
@@ -104,12 +100,37 @@ static int __init orion_nand_probe(struct platform_device *pdev)
 
 	io_base = ioremap(res->start, resource_size(res));
 	if (!io_base) {
-		printk(KERN_ERR "orion_nand: ioremap failed\n");
+		dev_err(&pdev->dev, "ioremap failed\n");
 		ret = -EIO;
 		goto no_res;
 	}
 
-	board = pdev->dev.platform_data;
+	if (pdev->dev.of_node) {
+		board = devm_kzalloc(&pdev->dev, sizeof(struct orion_nand_data),
+					GFP_KERNEL);
+		if (!board) {
+			ret = -ENOMEM;
+			goto no_res;
+		}
+		if (!of_property_read_u32(pdev->dev.of_node, "cle", &val))
+			board->cle = (u8)val;
+		else
+			board->cle = 0;
+		if (!of_property_read_u32(pdev->dev.of_node, "ale", &val))
+			board->ale = (u8)val;
+		else
+			board->ale = 1;
+		if (!of_property_read_u32(pdev->dev.of_node,
+						"bank-width", &val))
+			board->width = (u8)val * 8;
+		else
+			board->width = 8;
+		if (!of_property_read_u32(pdev->dev.of_node,
+						"chip-delay", &val))
+			board->chip_delay = (u8)val;
+	} else {
+		board = dev_get_platdata(&pdev->dev);
+	}
 
 	mtd->priv = nc;
 	mtd->owner = THIS_MODULE;
@@ -123,6 +144,10 @@ static int __init orion_nand_probe(struct platform_device *pdev)
 	if (board->chip_delay)
 		nc->chip_delay = board->chip_delay;
 
+	WARN(board->width > 16,
+		"%d bit bus width out of range",
+		board->width);
+
 	if (board->width == 16)
 		nc->options |= NAND_BUSWIDTH_16;
 
@@ -131,30 +156,23 @@ static int __init orion_nand_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, mtd);
 
+	/* Not all platforms can gate the clock, so it is not
+	   an error if the clock does not exists. */
+	clk = clk_get(&pdev->dev, NULL);
+	if (!IS_ERR(clk)) {
+		clk_prepare_enable(clk);
+		clk_put(clk);
+	}
+
 	if (nand_scan(mtd, 1)) {
 		ret = -ENXIO;
 		goto no_dev;
 	}
 
-#ifdef CONFIG_MTD_PARTITIONS
-#ifdef CONFIG_MTD_CMDLINE_PARTS
 	mtd->name = "orion_nand";
-	num_part = parse_mtd_partitions(mtd, part_probes, &partitions, 0);
-#endif
-	/* If cmdline partitions have been passed, let them be used */
-	if (num_part <= 0) {
-		num_part = board->nr_parts;
-		partitions = board->parts;
-	}
-
-	if (partitions && num_part > 0)
-		ret = add_mtd_partitions(mtd, partitions, num_part);
-	else
-		ret = add_mtd_device(mtd);
-#else
-	ret = add_mtd_device(mtd);
-#endif
-
+	ppdata.of_node = pdev->dev.of_node;
+	ret = mtd_device_parse_register(mtd, NULL, &ppdata,
+			board->parts, board->nr_parts);
 	if (ret) {
 		nand_release(mtd);
 		goto no_dev;
@@ -163,7 +181,10 @@ static int __init orion_nand_probe(struct platform_device *pdev)
 	return 0;
 
 no_dev:
-	platform_set_drvdata(pdev, NULL);
+	if (!IS_ERR(clk)) {
+		clk_disable_unprepare(clk);
+		clk_put(clk);
+	}
 	iounmap(io_base);
 no_res:
 	kfree(nc);
@@ -171,10 +192,11 @@ no_res:
 	return ret;
 }
 
-static int __devexit orion_nand_remove(struct platform_device *pdev)
+static int orion_nand_remove(struct platform_device *pdev)
 {
 	struct mtd_info *mtd = platform_get_drvdata(pdev);
 	struct nand_chip *nc = mtd->priv;
+	struct clk *clk;
 
 	nand_release(mtd);
 
@@ -182,29 +204,32 @@ static int __devexit orion_nand_remove(struct platform_device *pdev)
 
 	kfree(nc);
 
+	clk = clk_get(&pdev->dev, NULL);
+	if (!IS_ERR(clk)) {
+		clk_disable_unprepare(clk);
+		clk_put(clk);
+	}
+
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id orion_nand_of_match_table[] = {
+	{ .compatible = "marvell,orion-nand", },
+	{},
+};
+#endif
+
 static struct platform_driver orion_nand_driver = {
-	.remove		= __devexit_p(orion_nand_remove),
+	.remove		= orion_nand_remove,
 	.driver		= {
 		.name	= "orion_nand",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(orion_nand_of_match_table),
 	},
 };
 
-static int __init orion_nand_init(void)
-{
-	return platform_driver_probe(&orion_nand_driver, orion_nand_probe);
-}
-
-static void __exit orion_nand_exit(void)
-{
-	platform_driver_unregister(&orion_nand_driver);
-}
-
-module_init(orion_nand_init);
-module_exit(orion_nand_exit);
+module_platform_driver_probe(orion_nand_driver, orion_nand_probe);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Tzachi Perelstein");
diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c
index f02af24d033..2c98f9da747 100644
--- a/drivers/mtd/nand/pasemi_nand.c
+++ b/drivers/mtd/nand/pasemi_nand.c
@@ -23,11 +23,12 @@
 #undef DEBUG
 
 #include <linux/slab.h>
-#include <linux/init.h>
 #include <linux/module.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ecc.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/pci.h>
@@ -89,8 +90,7 @@ int pasemi_device_ready(struct mtd_info *mtd)
 	return !!(inl(lpcctl) & LBICTRL_LPCCTL_NR);
 }
 
-static int __devinit pasemi_nand_probe(struct of_device *ofdev,
-				      const struct of_device_id *match)
+static int pasemi_nand_probe(struct platform_device *ofdev)
 {
 	struct pci_dev *pdev;
 	struct device_node *np = ofdev->dev.of_node;
@@ -107,7 +107,7 @@ static int __devinit pasemi_nand_probe(struct of_device *ofdev,
 	if (pasemi_nand_mtd)
 		return -ENODEV;
 
-	pr_debug("pasemi_nand at %llx-%llx\n", res.start, res.end);
+	pr_debug("pasemi_nand at %pR\n", &res);
 
 	/* Allocate memory for MTD device structure and private data */
 	pasemi_nand_mtd = kzalloc(sizeof(struct mtd_info) +
@@ -156,15 +156,15 @@ static int __devinit pasemi_nand_probe(struct of_device *ofdev,
 	chip->ecc.mode = NAND_ECC_SOFT;
 
 	/* Enable the following for a flash based bad block table */
-	chip->options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR;
+	chip->bbt_options = NAND_BBT_USE_FLASH;
 
-	/* Scan to find existance of the device */
+	/* Scan to find existence of the device */
 	if (nand_scan(pasemi_nand_mtd, 1)) {
 		err = -ENXIO;
 		goto out_lpc;
 	}
 
-	if (add_mtd_device(pasemi_nand_mtd)) {
+	if (mtd_device_register(pasemi_nand_mtd, NULL, 0)) {
 		printk(KERN_ERR "pasemi_nand: Unable to register MTD device\n");
 		err = -ENODEV;
 		goto out_lpc;
@@ -185,7 +185,7 @@ static int __devinit pasemi_nand_probe(struct of_device *ofdev,
 	return err;
 }
 
-static int __devexit pasemi_nand_remove(struct of_device *ofdev)
+static int pasemi_nand_remove(struct platform_device *ofdev)
 {
 	struct nand_chip *chip;
 
@@ -219,10 +219,10 @@ static const struct of_device_id pasemi_nand_match[] =
 
 MODULE_DEVICE_TABLE(of, pasemi_nand_match);
 
-static struct of_platform_driver pasemi_nand_driver =
+static struct platform_driver pasemi_nand_driver =
 {
 	.driver = {
-		.name = (char*)driver_name,
+		.name = driver_name,
 		.owner = THIS_MODULE,
 		.of_match_table = pasemi_nand_match,
 	},
@@ -230,17 +230,7 @@ static struct of_platform_driver pasemi_nand_driver =
 	.remove		= pasemi_nand_remove,
 };
 
-static int __init pasemi_nand_init(void)
-{
-	return of_register_platform_driver(&pasemi_nand_driver);
-}
-module_init(pasemi_nand_init);
-
-static void __exit pasemi_nand_exit(void)
-{
-	of_unregister_platform_driver(&pasemi_nand_driver);
-}
-module_exit(pasemi_nand_exit);
+module_platform_driver(pasemi_nand_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Egor Martovetsky <egor@pasemi.com>");
diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c
index 8d467315f02..0b068a5c0bf 100644
--- a/drivers/mtd/nand/plat_nand.c
+++ b/drivers/mtd/nand/plat_nand.c
@@ -9,6 +9,7 @@
  *
  */
 
+#include <linux/err.h>
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
@@ -21,46 +22,42 @@ struct plat_nand_data {
 	struct nand_chip	chip;
 	struct mtd_info		mtd;
 	void __iomem		*io_base;
-#ifdef CONFIG_MTD_PARTITIONS
-	int			nr_parts;
-	struct mtd_partition	*parts;
-#endif
 };
 
+static const char *part_probe_types[] = { "cmdlinepart", NULL };
+
 /*
  * Probe for the NAND device.
  */
-static int __devinit plat_nand_probe(struct platform_device *pdev)
+static int plat_nand_probe(struct platform_device *pdev)
 {
-	struct platform_nand_data *pdata = pdev->dev.platform_data;
+	struct platform_nand_data *pdata = dev_get_platdata(&pdev->dev);
+	struct mtd_part_parser_data ppdata;
 	struct plat_nand_data *data;
 	struct resource *res;
+	const char **part_types;
 	int err = 0;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -ENXIO;
-
-	/* Allocate memory for the device structure (and zero it) */
-	data = kzalloc(sizeof(struct plat_nand_data), GFP_KERNEL);
-	if (!data) {
-		dev_err(&pdev->dev, "failed to allocate device structure.\n");
-		return -ENOMEM;
+	if (!pdata) {
+		dev_err(&pdev->dev, "platform_nand_data is missing\n");
+		return -EINVAL;
 	}
 
-	if (!request_mem_region(res->start, resource_size(res),
-				dev_name(&pdev->dev))) {
-		dev_err(&pdev->dev, "request_mem_region failed\n");
-		err = -EBUSY;
-		goto out_free;
+	if (pdata->chip.nr_chips < 1) {
+		dev_err(&pdev->dev, "invalid number of chips specified\n");
+		return -EINVAL;
 	}
 
-	data->io_base = ioremap(res->start, resource_size(res));
-	if (data->io_base == NULL) {
-		dev_err(&pdev->dev, "ioremap failed\n");
-		err = -EIO;
-		goto out_release_io;
-	}
+	/* Allocate memory for the device structure (and zero it) */
+	data = devm_kzalloc(&pdev->dev, sizeof(struct plat_nand_data),
+			    GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	data->io_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(data->io_base))
+		return PTR_ERR(data->io_base);
 
 	data->chip.priv = &data;
 	data->mtd.priv = &data->chip;
@@ -74,8 +71,10 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
 	data->chip.select_chip = pdata->ctrl.select_chip;
 	data->chip.write_buf = pdata->ctrl.write_buf;
 	data->chip.read_buf = pdata->ctrl.read_buf;
+	data->chip.read_byte = pdata->ctrl.read_byte;
 	data->chip.chip_delay = pdata->chip.chip_delay;
 	data->chip.options |= pdata->chip.options;
+	data->chip.bbt_options |= pdata->chip.bbt_options;
 
 	data->chip.ecc.hwctl = pdata->ctrl.hwcontrol;
 	data->chip.ecc.layout = pdata->chip.ecclayout;
@@ -90,31 +89,18 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
 			goto out;
 	}
 
-	/* Scan to find existance of the device */
-	if (nand_scan(&data->mtd, 1)) {
+	/* Scan to find existence of the device */
+	if (nand_scan(&data->mtd, pdata->chip.nr_chips)) {
 		err = -ENXIO;
 		goto out;
 	}
 
-#ifdef CONFIG_MTD_PARTITIONS
-	if (pdata->chip.part_probe_types) {
-		err = parse_mtd_partitions(&data->mtd,
-					pdata->chip.part_probe_types,
-					&data->parts, 0);
-		if (err > 0) {
-			add_mtd_partitions(&data->mtd, data->parts, err);
-			return 0;
-		}
-	}
-	if (pdata->chip.set_parts)
-		pdata->chip.set_parts(data->mtd.size, &pdata->chip);
-	if (pdata->chip.partitions) {
-		data->parts = pdata->chip.partitions;
-		err = add_mtd_partitions(&data->mtd, data->parts,
-			pdata->chip.nr_partitions);
-	} else
-#endif
-	err = add_mtd_device(&data->mtd);
+	part_types = pdata->chip.part_probe_types ? : part_probe_types;
+
+	ppdata.of_node = pdev->dev.of_node;
+	err = mtd_device_parse_register(&data->mtd, part_types, &ppdata,
+					pdata->chip.partitions,
+					pdata->chip.nr_partitions);
 
 	if (!err)
 		return err;
@@ -123,61 +109,41 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
 out:
 	if (pdata->ctrl.remove)
 		pdata->ctrl.remove(pdev);
-	platform_set_drvdata(pdev, NULL);
-	iounmap(data->io_base);
-out_release_io:
-	release_mem_region(res->start, resource_size(res));
-out_free:
-	kfree(data);
 	return err;
 }
 
 /*
  * Remove a NAND device.
  */
-static int __devexit plat_nand_remove(struct platform_device *pdev)
+static int plat_nand_remove(struct platform_device *pdev)
 {
 	struct plat_nand_data *data = platform_get_drvdata(pdev);
-	struct platform_nand_data *pdata = pdev->dev.platform_data;
-	struct resource *res;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	struct platform_nand_data *pdata = dev_get_platdata(&pdev->dev);
 
 	nand_release(&data->mtd);
-#ifdef CONFIG_MTD_PARTITIONS
-	if (data->parts && data->parts != pdata->chip.partitions)
-		kfree(data->parts);
-#endif
 	if (pdata->ctrl.remove)
 		pdata->ctrl.remove(pdev);
-	iounmap(data->io_base);
-	release_mem_region(res->start, resource_size(res));
-	kfree(data);
 
 	return 0;
 }
 
+static const struct of_device_id plat_nand_match[] = {
+	{ .compatible = "gen_nand" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, plat_nand_match);
+
 static struct platform_driver plat_nand_driver = {
-	.probe		= plat_nand_probe,
-	.remove		= __devexit_p(plat_nand_remove),
-	.driver		= {
-		.name	= "gen_nand",
-		.owner	= THIS_MODULE,
+	.probe	= plat_nand_probe,
+	.remove	= plat_nand_remove,
+	.driver	= {
+		.name		= "gen_nand",
+		.owner		= THIS_MODULE,
+		.of_match_table = plat_nand_match,
 	},
 };
 
-static int __init plat_nand_init(void)
-{
-	return platform_driver_register(&plat_nand_driver);
-}
-
-static void __exit plat_nand_exit(void)
-{
-	platform_driver_unregister(&plat_nand_driver);
-}
-
-module_init(plat_nand_init);
-module_exit(plat_nand_exit);
+module_platform_driver(plat_nand_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Vitaly Wool");
diff --git a/drivers/mtd/nand/ppchameleonevb.c b/drivers/mtd/nand/ppchameleonevb.c
deleted file mode 100644
index cc865843185..00000000000
--- a/drivers/mtd/nand/ppchameleonevb.c
+++ /dev/null
@@ -1,437 +0,0 @@
-/*
- *  drivers/mtd/nand/ppchameleonevb.c
- *
- *  Copyright (C) 2003 DAVE Srl (info@wawnet.biz)
- *
- *  Derived from drivers/mtd/nand/edb7312.c
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Overview:
- *   This is a device driver for the NAND flash devices found on the
- *   PPChameleon/PPChameleonEVB system.
- *   PPChameleon options (autodetected):
- *   - BA model: no NAND
- *   - ME model: 32MB (Samsung K9F5608U0B)
- *   - HI model: 128MB (Samsung K9F1G08UOM)
- *   PPChameleonEVB options:
- *   - 32MB (Samsung K9F5608U0B)
- */
-
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <asm/io.h>
-#include <platforms/PPChameleonEVB.h>
-
-#undef USE_READY_BUSY_PIN
-#define USE_READY_BUSY_PIN
-/* see datasheets (tR) */
-#define NAND_BIG_DELAY_US		25
-#define NAND_SMALL_DELAY_US		10
-
-/* handy sizes */
-#define SZ_4M                           0x00400000
-#define NAND_SMALL_SIZE                 0x02000000
-#define NAND_MTD_NAME		"ppchameleon-nand"
-#define NAND_EVB_MTD_NAME	"ppchameleonevb-nand"
-
-/* GPIO pins used to drive NAND chip mounted on processor module */
-#define NAND_nCE_GPIO_PIN 		(0x80000000 >> 1)
-#define NAND_CLE_GPIO_PIN 		(0x80000000 >> 2)
-#define NAND_ALE_GPIO_PIN 		(0x80000000 >> 3)
-#define NAND_RB_GPIO_PIN 		(0x80000000 >> 4)
-/* GPIO pins used to drive NAND chip mounted on EVB */
-#define NAND_EVB_nCE_GPIO_PIN 	(0x80000000 >> 14)
-#define NAND_EVB_CLE_GPIO_PIN 	(0x80000000 >> 15)
-#define NAND_EVB_ALE_GPIO_PIN 	(0x80000000 >> 16)
-#define NAND_EVB_RB_GPIO_PIN 	(0x80000000 >> 31)
-
-/*
- * MTD structure for PPChameleonEVB board
- */
-static struct mtd_info *ppchameleon_mtd = NULL;
-static struct mtd_info *ppchameleonevb_mtd = NULL;
-
-/*
- * Module stuff
- */
-static unsigned long ppchameleon_fio_pbase = CFG_NAND0_PADDR;
-static unsigned long ppchameleonevb_fio_pbase = CFG_NAND1_PADDR;
-
-#ifdef MODULE
-module_param(ppchameleon_fio_pbase, ulong, 0);
-module_param(ppchameleonevb_fio_pbase, ulong, 0);
-#else
-__setup("ppchameleon_fio_pbase=", ppchameleon_fio_pbase);
-__setup("ppchameleonevb_fio_pbase=", ppchameleonevb_fio_pbase);
-#endif
-
-#ifdef CONFIG_MTD_PARTITIONS
-/*
- * Define static partitions for flash devices
- */
-static struct mtd_partition partition_info_hi[] = {
-      { .name = "PPChameleon HI Nand Flash",
-	.offset = 0,
-	.size = 128 * 1024 * 1024
-      }
-};
-
-static struct mtd_partition partition_info_me[] = {
-      { .name = "PPChameleon ME Nand Flash",
-	.offset = 0,
-	.size = 32 * 1024 * 1024
-      }
-};
-
-static struct mtd_partition partition_info_evb[] = {
-      { .name = "PPChameleonEVB Nand Flash",
-	.offset = 0,
-	.size = 32 * 1024 * 1024
-      }
-};
-
-#define NUM_PARTITIONS 1
-
-extern int parse_cmdline_partitions(struct mtd_info *master, struct mtd_partition **pparts, const char *mtd_id);
-#endif
-
-/*
- *	hardware specific access to control-lines
- */
-static void ppchameleon_hwcontrol(struct mtd_info *mtdinfo, int cmd,
-				  unsigned int ctrl)
-{
-	struct nand_chip *chip = mtd->priv;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-#error Missing headerfiles. No way to fix this. -tglx
-		switch (cmd) {
-		case NAND_CTL_SETCLE:
-			MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND0_PADDR);
-			break;
-		case NAND_CTL_CLRCLE:
-			MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND0_PADDR);
-			break;
-		case NAND_CTL_SETALE:
-			MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND0_PADDR);
-			break;
-		case NAND_CTL_CLRALE:
-			MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND0_PADDR);
-			break;
-		case NAND_CTL_SETNCE:
-			MACRO_NAND_ENABLE_CE((unsigned long)CFG_NAND0_PADDR);
-			break;
-		case NAND_CTL_CLRNCE:
-			MACRO_NAND_DISABLE_CE((unsigned long)CFG_NAND0_PADDR);
-			break;
-		}
-	}
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, chip->IO_ADDR_W);
-}
-
-static void ppchameleonevb_hwcontrol(struct mtd_info *mtdinfo, int cmd,
-				     unsigned int ctrl)
-{
-	struct nand_chip *chip = mtd->priv;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-#error Missing headerfiles. No way to fix this. -tglx
-		switch (cmd) {
-		case NAND_CTL_SETCLE:
-			MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND1_PADDR);
-			break;
-		case NAND_CTL_CLRCLE:
-			MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND1_PADDR);
-			break;
-		case NAND_CTL_SETALE:
-			MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND1_PADDR);
-			break;
-		case NAND_CTL_CLRALE:
-			MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND1_PADDR);
-			break;
-		case NAND_CTL_SETNCE:
-			MACRO_NAND_ENABLE_CE((unsigned long)CFG_NAND1_PADDR);
-			break;
-		case NAND_CTL_CLRNCE:
-			MACRO_NAND_DISABLE_CE((unsigned long)CFG_NAND1_PADDR);
-			break;
-		}
-	}
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, chip->IO_ADDR_W);
-}
-
-#ifdef USE_READY_BUSY_PIN
-/*
- *	read device ready pin
- */
-static int ppchameleon_device_ready(struct mtd_info *minfo)
-{
-	if (in_be32((volatile unsigned *)GPIO0_IR) & NAND_RB_GPIO_PIN)
-		return 1;
-	return 0;
-}
-
-static int ppchameleonevb_device_ready(struct mtd_info *minfo)
-{
-	if (in_be32((volatile unsigned *)GPIO0_IR) & NAND_EVB_RB_GPIO_PIN)
-		return 1;
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_MTD_PARTITIONS
-const char *part_probes[] = { "cmdlinepart", NULL };
-const char *part_probes_evb[] = { "cmdlinepart", NULL };
-#endif
-
-/*
- * Main initialization routine
- */
-static int __init ppchameleonevb_init(void)
-{
-	struct nand_chip *this;
-	const char *part_type = 0;
-	int mtd_parts_nb = 0;
-	struct mtd_partition *mtd_parts = 0;
-	void __iomem *ppchameleon_fio_base;
-	void __iomem *ppchameleonevb_fio_base;
-
-	/*********************************
-	* Processor module NAND (if any) *
-	*********************************/
-	/* Allocate memory for MTD device structure and private data */
-	ppchameleon_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
-	if (!ppchameleon_mtd) {
-		printk("Unable to allocate PPChameleon NAND MTD device structure.\n");
-		return -ENOMEM;
-	}
-
-	/* map physical address */
-	ppchameleon_fio_base = ioremap(ppchameleon_fio_pbase, SZ_4M);
-	if (!ppchameleon_fio_base) {
-		printk("ioremap PPChameleon NAND flash failed\n");
-		kfree(ppchameleon_mtd);
-		return -EIO;
-	}
-
-	/* Get pointer to private data */
-	this = (struct nand_chip *)(&ppchameleon_mtd[1]);
-
-	/* Initialize structures */
-	memset(ppchameleon_mtd, 0, sizeof(struct mtd_info));
-	memset(this, 0, sizeof(struct nand_chip));
-
-	/* Link the private data with the MTD structure */
-	ppchameleon_mtd->priv = this;
-	ppchameleon_mtd->owner = THIS_MODULE;
-
-	/* Initialize GPIOs */
-	/* Pin mapping for NAND chip */
-	/*
-	   CE   GPIO_01
-	   CLE  GPIO_02
-	   ALE  GPIO_03
-	   R/B  GPIO_04
-	 */
-	/* output select */
-	out_be32((volatile unsigned *)GPIO0_OSRH, in_be32((volatile unsigned *)GPIO0_OSRH) & 0xC0FFFFFF);
-	/* three-state select */
-	out_be32((volatile unsigned *)GPIO0_TSRH, in_be32((volatile unsigned *)GPIO0_TSRH) & 0xC0FFFFFF);
-	/* enable output driver */
-	out_be32((volatile unsigned *)GPIO0_TCR,
-		 in_be32((volatile unsigned *)GPIO0_TCR) | NAND_nCE_GPIO_PIN | NAND_CLE_GPIO_PIN | NAND_ALE_GPIO_PIN);
-#ifdef USE_READY_BUSY_PIN
-	/* three-state select */
-	out_be32((volatile unsigned *)GPIO0_TSRH, in_be32((volatile unsigned *)GPIO0_TSRH) & 0xFF3FFFFF);
-	/* high-impedecence */
-	out_be32((volatile unsigned *)GPIO0_TCR, in_be32((volatile unsigned *)GPIO0_TCR) & (~NAND_RB_GPIO_PIN));
-	/* input select */
-	out_be32((volatile unsigned *)GPIO0_ISR1H,
-		 (in_be32((volatile unsigned *)GPIO0_ISR1H) & 0xFF3FFFFF) | 0x00400000);
-#endif
-
-	/* insert callbacks */
-	this->IO_ADDR_R = ppchameleon_fio_base;
-	this->IO_ADDR_W = ppchameleon_fio_base;
-	this->cmd_ctrl = ppchameleon_hwcontrol;
-#ifdef USE_READY_BUSY_PIN
-	this->dev_ready = ppchameleon_device_ready;
-#endif
-	this->chip_delay = NAND_BIG_DELAY_US;
-	/* ECC mode */
-	this->ecc.mode = NAND_ECC_SOFT;
-
-	/* Scan to find existence of the device (it could not be mounted) */
-	if (nand_scan(ppchameleon_mtd, 1)) {
-		iounmap((void *)ppchameleon_fio_base);
-		ppchameleon_fio_base = NULL;
-		kfree(ppchameleon_mtd);
-		goto nand_evb_init;
-	}
-#ifndef USE_READY_BUSY_PIN
-	/* Adjust delay if necessary */
-	if (ppchameleon_mtd->size == NAND_SMALL_SIZE)
-		this->chip_delay = NAND_SMALL_DELAY_US;
-#endif
-
-#ifdef CONFIG_MTD_PARTITIONS
-	ppchameleon_mtd->name = "ppchameleon-nand";
-	mtd_parts_nb = parse_mtd_partitions(ppchameleon_mtd, part_probes, &mtd_parts, 0);
-	if (mtd_parts_nb > 0)
-		part_type = "command line";
-	else
-		mtd_parts_nb = 0;
-#endif
-	if (mtd_parts_nb == 0) {
-		if (ppchameleon_mtd->size == NAND_SMALL_SIZE)
-			mtd_parts = partition_info_me;
-		else
-			mtd_parts = partition_info_hi;
-		mtd_parts_nb = NUM_PARTITIONS;
-		part_type = "static";
-	}
-
-	/* Register the partitions */
-	printk(KERN_NOTICE "Using %s partition definition\n", part_type);
-	add_mtd_partitions(ppchameleon_mtd, mtd_parts, mtd_parts_nb);
-
- nand_evb_init:
-	/****************************
-	* EVB NAND (always present) *
-	****************************/
-	/* Allocate memory for MTD device structure and private data */
-	ppchameleonevb_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
-	if (!ppchameleonevb_mtd) {
-		printk("Unable to allocate PPChameleonEVB NAND MTD device structure.\n");
-		if (ppchameleon_fio_base)
-			iounmap(ppchameleon_fio_base);
-		return -ENOMEM;
-	}
-
-	/* map physical address */
-	ppchameleonevb_fio_base = ioremap(ppchameleonevb_fio_pbase, SZ_4M);
-	if (!ppchameleonevb_fio_base) {
-		printk("ioremap PPChameleonEVB NAND flash failed\n");
-		kfree(ppchameleonevb_mtd);
-		if (ppchameleon_fio_base)
-			iounmap(ppchameleon_fio_base);
-		return -EIO;
-	}
-
-	/* Get pointer to private data */
-	this = (struct nand_chip *)(&ppchameleonevb_mtd[1]);
-
-	/* Initialize structures */
-	memset(ppchameleonevb_mtd, 0, sizeof(struct mtd_info));
-	memset(this, 0, sizeof(struct nand_chip));
-
-	/* Link the private data with the MTD structure */
-	ppchameleonevb_mtd->priv = this;
-
-	/* Initialize GPIOs */
-	/* Pin mapping for NAND chip */
-	/*
-	   CE   GPIO_14
-	   CLE  GPIO_15
-	   ALE  GPIO_16
-	   R/B  GPIO_31
-	 */
-	/* output select */
-	out_be32((volatile unsigned *)GPIO0_OSRH, in_be32((volatile unsigned *)GPIO0_OSRH) & 0xFFFFFFF0);
-	out_be32((volatile unsigned *)GPIO0_OSRL, in_be32((volatile unsigned *)GPIO0_OSRL) & 0x3FFFFFFF);
-	/* three-state select */
-	out_be32((volatile unsigned *)GPIO0_TSRH, in_be32((volatile unsigned *)GPIO0_TSRH) & 0xFFFFFFF0);
-	out_be32((volatile unsigned *)GPIO0_TSRL, in_be32((volatile unsigned *)GPIO0_TSRL) & 0x3FFFFFFF);
-	/* enable output driver */
-	out_be32((volatile unsigned *)GPIO0_TCR, in_be32((volatile unsigned *)GPIO0_TCR) | NAND_EVB_nCE_GPIO_PIN |
-		 NAND_EVB_CLE_GPIO_PIN | NAND_EVB_ALE_GPIO_PIN);
-#ifdef USE_READY_BUSY_PIN
-	/* three-state select */
-	out_be32((volatile unsigned *)GPIO0_TSRL, in_be32((volatile unsigned *)GPIO0_TSRL) & 0xFFFFFFFC);
-	/* high-impedecence */
-	out_be32((volatile unsigned *)GPIO0_TCR, in_be32((volatile unsigned *)GPIO0_TCR) & (~NAND_EVB_RB_GPIO_PIN));
-	/* input select */
-	out_be32((volatile unsigned *)GPIO0_ISR1L,
-		 (in_be32((volatile unsigned *)GPIO0_ISR1L) & 0xFFFFFFFC) | 0x00000001);
-#endif
-
-	/* insert callbacks */
-	this->IO_ADDR_R = ppchameleonevb_fio_base;
-	this->IO_ADDR_W = ppchameleonevb_fio_base;
-	this->cmd_ctrl = ppchameleonevb_hwcontrol;
-#ifdef USE_READY_BUSY_PIN
-	this->dev_ready = ppchameleonevb_device_ready;
-#endif
-	this->chip_delay = NAND_SMALL_DELAY_US;
-
-	/* ECC mode */
-	this->ecc.mode = NAND_ECC_SOFT;
-
-	/* Scan to find existence of the device */
-	if (nand_scan(ppchameleonevb_mtd, 1)) {
-		iounmap((void *)ppchameleonevb_fio_base);
-		kfree(ppchameleonevb_mtd);
-		if (ppchameleon_fio_base)
-			iounmap(ppchameleon_fio_base);
-		return -ENXIO;
-	}
-#ifdef CONFIG_MTD_PARTITIONS
-	ppchameleonevb_mtd->name = NAND_EVB_MTD_NAME;
-	mtd_parts_nb = parse_mtd_partitions(ppchameleonevb_mtd, part_probes_evb, &mtd_parts, 0);
-	if (mtd_parts_nb > 0)
-		part_type = "command line";
-	else
-		mtd_parts_nb = 0;
-#endif
-	if (mtd_parts_nb == 0) {
-		mtd_parts = partition_info_evb;
-		mtd_parts_nb = NUM_PARTITIONS;
-		part_type = "static";
-	}
-
-	/* Register the partitions */
-	printk(KERN_NOTICE "Using %s partition definition\n", part_type);
-	add_mtd_partitions(ppchameleonevb_mtd, mtd_parts, mtd_parts_nb);
-
-	/* Return happy */
-	return 0;
-}
-
-module_init(ppchameleonevb_init);
-
-/*
- * Clean up routine
- */
-static void __exit ppchameleonevb_cleanup(void)
-{
-	struct nand_chip *this;
-
-	/* Release resources, unregister device(s) */
-	nand_release(ppchameleon_mtd);
-	nand_release(ppchameleonevb_mtd);
-
-	/* Release iomaps */
-	this = (struct nand_chip *) &ppchameleon_mtd[1];
-	iounmap((void *) this->IO_ADDR_R);
-	this = (struct nand_chip *) &ppchameleonevb_mtd[1];
-	iounmap((void *) this->IO_ADDR_R);
-
-	/* Free the MTD device structure */
-	kfree (ppchameleon_mtd);
-	kfree (ppchameleonevb_mtd);
-}
-module_exit(ppchameleonevb_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("DAVE Srl <support-ppchameleon@dave-tech.it>");
-MODULE_DESCRIPTION("MTD map driver for DAVE Srl PPChameleonEVB board");
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index e02fa4f0e3c..96b0b1d27df 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -7,6 +7,8 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
+ *
+ * See Documentation/mtd/nand/pxa3xx-nand.txt for more details.
  */
 
 #include <linux/kernel.h>
@@ -22,11 +24,30 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_mtd.h>
+
+#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP)
+#define ARCH_HAS_DMA
+#endif
 
+#ifdef ARCH_HAS_DMA
 #include <mach/dma.h>
-#include <plat/pxa3xx_nand.h>
+#endif
+
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
 
 #define	CHIP_DELAY_TIMEOUT	(2 * HZ/10)
+#define NAND_STOP_DELAY		(2 * HZ/50)
+#define PAGE_CHUNK_SIZE		(2048)
+
+/*
+ * Define a buffer size for the initial command that detects the flash device:
+ * STATUS, READID and PARAM. The largest of these is the PARAM command,
+ * needing 256 bytes.
+ */
+#define INIT_BUFFER_SIZE	256
 
 /* registers and bit definitions */
 #define NDCR		(0x00) /* Control register */
@@ -36,6 +57,7 @@
 #define NDPCR		(0x18) /* Page Count Register */
 #define NDBDR0		(0x1C) /* Bad Block Register 0 */
 #define NDBDR1		(0x20) /* Bad Block Register 1 */
+#define NDECCCTRL	(0x28) /* ECC control */
 #define NDDB		(0x40) /* Data Buffer */
 #define NDCB0		(0x48) /* Command Buffer0 */
 #define NDCB1		(0x4C) /* Command Buffer1 */
@@ -52,30 +74,39 @@
 #define NDCR_ND_MODE		(0x3 << 21)
 #define NDCR_NAND_MODE   	(0x0)
 #define NDCR_CLR_PG_CNT		(0x1 << 20)
-#define NDCR_CLR_ECC		(0x1 << 19)
+#define NDCR_STOP_ON_UNCOR	(0x1 << 19)
 #define NDCR_RD_ID_CNT_MASK	(0x7 << 16)
 #define NDCR_RD_ID_CNT(x)	(((x) << 16) & NDCR_RD_ID_CNT_MASK)
 
 #define NDCR_RA_START		(0x1 << 15)
 #define NDCR_PG_PER_BLK		(0x1 << 14)
 #define NDCR_ND_ARB_EN		(0x1 << 12)
+#define NDCR_INT_MASK           (0xFFF)
 
 #define NDSR_MASK		(0xfff)
-#define NDSR_RDY		(0x1 << 11)
+#define NDSR_ERR_CNT_OFF	(16)
+#define NDSR_ERR_CNT_MASK       (0x1f)
+#define NDSR_ERR_CNT(sr)	((sr >> NDSR_ERR_CNT_OFF) & NDSR_ERR_CNT_MASK)
+#define NDSR_RDY                (0x1 << 12)
+#define NDSR_FLASH_RDY          (0x1 << 11)
 #define NDSR_CS0_PAGED		(0x1 << 10)
 #define NDSR_CS1_PAGED		(0x1 << 9)
 #define NDSR_CS0_CMDD		(0x1 << 8)
 #define NDSR_CS1_CMDD		(0x1 << 7)
 #define NDSR_CS0_BBD		(0x1 << 6)
 #define NDSR_CS1_BBD		(0x1 << 5)
-#define NDSR_DBERR		(0x1 << 4)
-#define NDSR_SBERR		(0x1 << 3)
+#define NDSR_UNCORERR		(0x1 << 4)
+#define NDSR_CORERR		(0x1 << 3)
 #define NDSR_WRDREQ		(0x1 << 2)
 #define NDSR_RDDREQ		(0x1 << 1)
 #define NDSR_WRCMDREQ		(0x1)
 
+#define NDCB0_LEN_OVRD		(0x1 << 28)
+#define NDCB0_ST_ROW_EN         (0x1 << 26)
 #define NDCB0_AUTO_RS		(0x1 << 25)
 #define NDCB0_CSEL		(0x1 << 24)
+#define NDCB0_EXT_CMD_TYPE_MASK	(0x7 << 29)
+#define NDCB0_EXT_CMD_TYPE(x)	(((x) << 29) & NDCB0_EXT_CMD_TYPE_MASK)
 #define NDCB0_CMD_TYPE_MASK	(0x7 << 21)
 #define NDCB0_CMD_TYPE(x)	(((x) << 21) & NDCB0_CMD_TYPE_MASK)
 #define NDCB0_NC		(0x1 << 20)
@@ -86,259 +117,211 @@
 #define NDCB0_CMD1_MASK		(0xff)
 #define NDCB0_ADDR_CYC_SHIFT	(16)
 
+#define EXT_CMD_TYPE_DISPATCH	6 /* Command dispatch */
+#define EXT_CMD_TYPE_NAKED_RW	5 /* Naked read or Naked write */
+#define EXT_CMD_TYPE_READ	4 /* Read */
+#define EXT_CMD_TYPE_DISP_WR	4 /* Command dispatch with write */
+#define EXT_CMD_TYPE_FINAL	3 /* Final command */
+#define EXT_CMD_TYPE_LAST_RW	1 /* Last naked read/write */
+#define EXT_CMD_TYPE_MONO	0 /* Monolithic read/write */
+
 /* macros for registers read/write */
 #define nand_writel(info, off, val)	\
-	__raw_writel((val), (info)->mmio_base + (off))
+	writel_relaxed((val), (info)->mmio_base + (off))
 
 #define nand_readl(info, off)		\
-	__raw_readl((info)->mmio_base + (off))
+	readl_relaxed((info)->mmio_base + (off))
 
 /* error code and state */
 enum {
 	ERR_NONE	= 0,
 	ERR_DMABUSERR	= -1,
 	ERR_SENDCMD	= -2,
-	ERR_DBERR	= -3,
+	ERR_UNCORERR	= -3,
 	ERR_BBERR	= -4,
-	ERR_SBERR	= -5,
+	ERR_CORERR	= -5,
 };
 
 enum {
-	STATE_READY	= 0,
+	STATE_IDLE = 0,
+	STATE_PREPARED,
 	STATE_CMD_HANDLE,
 	STATE_DMA_READING,
 	STATE_DMA_WRITING,
 	STATE_DMA_DONE,
 	STATE_PIO_READING,
 	STATE_PIO_WRITING,
+	STATE_CMD_DONE,
+	STATE_READY,
 };
 
-struct pxa3xx_nand_info {
-	struct nand_chip	nand_chip;
+enum pxa3xx_nand_variant {
+	PXA3XX_NAND_VARIANT_PXA,
+	PXA3XX_NAND_VARIANT_ARMADA370,
+};
+
+struct pxa3xx_nand_host {
+	struct nand_chip	chip;
+	struct mtd_info         *mtd;
+	void			*info_data;
+
+	/* page size of attached chip */
+	int			use_ecc;
+	int			cs;
+
+	/* calculated from pxa3xx_nand_flash data */
+	unsigned int		col_addr_cycles;
+	unsigned int		row_addr_cycles;
+	size_t			read_id_bytes;
 
+};
+
+struct pxa3xx_nand_info {
+	struct nand_hw_control	controller;
 	struct platform_device	 *pdev;
-	const struct pxa3xx_nand_flash *flash_info;
 
 	struct clk		*clk;
 	void __iomem		*mmio_base;
 	unsigned long		mmio_phys;
+	struct completion	cmd_complete, dev_ready;
 
 	unsigned int 		buf_start;
 	unsigned int		buf_count;
+	unsigned int		buf_size;
+	unsigned int		data_buff_pos;
+	unsigned int		oob_buff_pos;
 
 	/* DMA information */
 	int			drcmr_dat;
 	int			drcmr_cmd;
 
 	unsigned char		*data_buff;
+	unsigned char		*oob_buff;
 	dma_addr_t 		data_buff_phys;
-	size_t			data_buff_size;
 	int 			data_dma_ch;
 	struct pxa_dma_desc	*data_desc;
 	dma_addr_t 		data_desc_addr;
 
-	uint32_t		reg_ndcr;
-
-	/* saved column/page_addr during CMD_SEQIN */
-	int			seqin_column;
-	int			seqin_page_addr;
-
-	/* relate to the command */
+	struct pxa3xx_nand_host *host[NUM_CHIP_SELECT];
 	unsigned int		state;
 
+	/*
+	 * This driver supports NFCv1 (as found in PXA SoC)
+	 * and NFCv2 (as found in Armada 370/XP SoC).
+	 */
+	enum pxa3xx_nand_variant variant;
+
+	int			cs;
 	int			use_ecc;	/* use HW ECC ? */
+	int			ecc_bch;	/* using BCH ECC? */
 	int			use_dma;	/* use DMA ? */
-
-	size_t			data_size;	/* data size in FIFO */
+	int			use_spare;	/* use spare ? */
+	int			need_wait;
+
+	unsigned int		data_size;	/* data to be read from FIFO */
+	unsigned int		chunk_size;	/* split commands chunk size */
+	unsigned int		oob_size;
+	unsigned int		spare_size;
+	unsigned int		ecc_size;
+	unsigned int		ecc_err_cnt;
+	unsigned int		max_bitflips;
 	int 			retcode;
-	struct completion 	cmd_complete;
+
+	/* cached register value */
+	uint32_t		reg_ndcr;
+	uint32_t		ndtr0cs0;
+	uint32_t		ndtr1cs0;
 
 	/* generated NDCBx register values */
 	uint32_t		ndcb0;
 	uint32_t		ndcb1;
 	uint32_t		ndcb2;
-
-	/* calculated from pxa3xx_nand_flash data */
-	size_t		oob_size;
-	size_t		read_id_bytes;
-
-	unsigned int	col_addr_cycles;
-	unsigned int	row_addr_cycles;
+	uint32_t		ndcb3;
 };
 
-static int use_dma = 1;
+static bool use_dma = 1;
 module_param(use_dma, bool, 0444);
-MODULE_PARM_DESC(use_dma, "enable DMA for data transfering to/from NAND HW");
-
-/*
- * Default NAND flash controller configuration setup by the
- * bootloader. This configuration is used only when pdata->keep_config is set
- */
-static struct pxa3xx_nand_timing default_timing;
-static struct pxa3xx_nand_flash default_flash;
-
-static struct pxa3xx_nand_cmdset smallpage_cmdset = {
-	.read1		= 0x0000,
-	.read2		= 0x0050,
-	.program	= 0x1080,
-	.read_status	= 0x0070,
-	.read_id	= 0x0090,
-	.erase		= 0xD060,
-	.reset		= 0x00FF,
-	.lock		= 0x002A,
-	.unlock		= 0x2423,
-	.lock_status	= 0x007A,
-};
-
-static struct pxa3xx_nand_cmdset largepage_cmdset = {
-	.read1		= 0x3000,
-	.read2		= 0x0050,
-	.program	= 0x1080,
-	.read_status	= 0x0070,
-	.read_id	= 0x0090,
-	.erase		= 0xD060,
-	.reset		= 0x00FF,
-	.lock		= 0x002A,
-	.unlock		= 0x2423,
-	.lock_status	= 0x007A,
-};
-
-#ifdef CONFIG_MTD_NAND_PXA3xx_BUILTIN
-static struct pxa3xx_nand_timing samsung512MbX16_timing = {
-	.tCH	= 10,
-	.tCS	= 0,
-	.tWH	= 20,
-	.tWP	= 40,
-	.tRH	= 30,
-	.tRP	= 40,
-	.tR	= 11123,
-	.tWHR	= 110,
-	.tAR	= 10,
-};
-
-static struct pxa3xx_nand_flash samsung512MbX16 = {
-	.timing		= &samsung512MbX16_timing,
-	.cmdset		= &smallpage_cmdset,
-	.page_per_block	= 32,
-	.page_size	= 512,
-	.flash_width	= 16,
-	.dfc_width	= 16,
-	.num_blocks	= 4096,
-	.chip_id	= 0x46ec,
-};
-
-static struct pxa3xx_nand_flash samsung2GbX8 = {
-	.timing		= &samsung512MbX16_timing,
-	.cmdset		= &smallpage_cmdset,
-	.page_per_block	= 64,
-	.page_size	= 2048,
-	.flash_width	= 8,
-	.dfc_width	= 8,
-	.num_blocks	= 2048,
-	.chip_id	= 0xdaec,
-};
-
-static struct pxa3xx_nand_flash samsung32GbX8 = {
-	.timing		= &samsung512MbX16_timing,
-	.cmdset		= &smallpage_cmdset,
-	.page_per_block	= 128,
-	.page_size	= 4096,
-	.flash_width	= 8,
-	.dfc_width	= 8,
-	.num_blocks	= 8192,
-	.chip_id	= 0xd7ec,
-};
+MODULE_PARM_DESC(use_dma, "enable DMA for data transferring to/from NAND HW");
 
-static struct pxa3xx_nand_timing micron_timing = {
-	.tCH	= 10,
-	.tCS	= 25,
-	.tWH	= 15,
-	.tWP	= 25,
-	.tRH	= 15,
-	.tRP	= 30,
-	.tR	= 25000,
-	.tWHR	= 60,
-	.tAR	= 10,
+static struct pxa3xx_nand_timing timing[] = {
+	{ 40, 80, 60, 100, 80, 100, 90000, 400, 40, },
+	{ 10,  0, 20,  40, 30,  40, 11123, 110, 10, },
+	{ 10, 25, 15,  25, 15,  30, 25000,  60, 10, },
+	{ 10, 35, 15,  25, 15,  25, 25000,  60, 10, },
 };
 
-static struct pxa3xx_nand_flash micron1GbX8 = {
-	.timing		= &micron_timing,
-	.cmdset		= &largepage_cmdset,
-	.page_per_block	= 64,
-	.page_size	= 2048,
-	.flash_width	= 8,
-	.dfc_width	= 8,
-	.num_blocks	= 1024,
-	.chip_id	= 0xa12c,
+static struct pxa3xx_nand_flash builtin_flash_types[] = {
+{ "DEFAULT FLASH",      0,   0, 2048,  8,  8,    0, &timing[0] },
+{ "64MiB 16-bit",  0x46ec,  32,  512, 16, 16, 4096, &timing[1] },
+{ "256MiB 8-bit",  0xdaec,  64, 2048,  8,  8, 2048, &timing[1] },
+{ "4GiB 8-bit",    0xd7ec, 128, 4096,  8,  8, 8192, &timing[1] },
+{ "128MiB 8-bit",  0xa12c,  64, 2048,  8,  8, 1024, &timing[2] },
+{ "128MiB 16-bit", 0xb12c,  64, 2048, 16, 16, 1024, &timing[2] },
+{ "512MiB 8-bit",  0xdc2c,  64, 2048,  8,  8, 4096, &timing[2] },
+{ "512MiB 16-bit", 0xcc2c,  64, 2048, 16, 16, 4096, &timing[2] },
+{ "256MiB 16-bit", 0xba20,  64, 2048, 16, 16, 2048, &timing[3] },
 };
 
-static struct pxa3xx_nand_flash micron1GbX16 = {
-	.timing		= &micron_timing,
-	.cmdset		= &largepage_cmdset,
-	.page_per_block	= 64,
-	.page_size	= 2048,
-	.flash_width	= 16,
-	.dfc_width	= 16,
-	.num_blocks	= 1024,
-	.chip_id	= 0xb12c,
+static u8 bbt_pattern[] = {'M', 'V', 'B', 'b', 't', '0' };
+static u8 bbt_mirror_pattern[] = {'1', 't', 'b', 'B', 'V', 'M' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+		| NAND_BBT_2BIT | NAND_BBT_VERSION,
+	.offs =	8,
+	.len = 6,
+	.veroffs = 14,
+	.maxblocks = 8,		/* Last 8 blocks in each chip */
+	.pattern = bbt_pattern
 };
 
-static struct pxa3xx_nand_flash micron4GbX8 = {
-	.timing		= &micron_timing,
-	.cmdset		= &largepage_cmdset,
-	.page_per_block	= 64,
-	.page_size	= 2048,
-	.flash_width	= 8,
-	.dfc_width	= 8,
-	.num_blocks	= 4096,
-	.chip_id	= 0xdc2c,
+static struct nand_bbt_descr bbt_mirror_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+		| NAND_BBT_2BIT | NAND_BBT_VERSION,
+	.offs =	8,
+	.len = 6,
+	.veroffs = 14,
+	.maxblocks = 8,		/* Last 8 blocks in each chip */
+	.pattern = bbt_mirror_pattern
 };
 
-static struct pxa3xx_nand_flash micron4GbX16 = {
-	.timing		= &micron_timing,
-	.cmdset		= &largepage_cmdset,
-	.page_per_block	= 64,
-	.page_size	= 2048,
-	.flash_width	= 16,
-	.dfc_width	= 16,
-	.num_blocks	= 4096,
-	.chip_id	= 0xcc2c,
+static struct nand_ecclayout ecc_layout_2KB_bch4bit = {
+	.eccbytes = 32,
+	.eccpos = {
+		32, 33, 34, 35, 36, 37, 38, 39,
+		40, 41, 42, 43, 44, 45, 46, 47,
+		48, 49, 50, 51, 52, 53, 54, 55,
+		56, 57, 58, 59, 60, 61, 62, 63},
+	.oobfree = { {2, 30} }
 };
 
-static struct pxa3xx_nand_timing stm2GbX16_timing = {
-	.tCH = 10,
-	.tCS = 35,
-	.tWH = 15,
-	.tWP = 25,
-	.tRH = 15,
-	.tRP = 25,
-	.tR = 25000,
-	.tWHR = 60,
-	.tAR = 10,
+static struct nand_ecclayout ecc_layout_4KB_bch4bit = {
+	.eccbytes = 64,
+	.eccpos = {
+		32,  33,  34,  35,  36,  37,  38,  39,
+		40,  41,  42,  43,  44,  45,  46,  47,
+		48,  49,  50,  51,  52,  53,  54,  55,
+		56,  57,  58,  59,  60,  61,  62,  63,
+		96,  97,  98,  99,  100, 101, 102, 103,
+		104, 105, 106, 107, 108, 109, 110, 111,
+		112, 113, 114, 115, 116, 117, 118, 119,
+		120, 121, 122, 123, 124, 125, 126, 127},
+	/* Bootrom looks in bytes 0 & 5 for bad blocks */
+	.oobfree = { {6, 26}, { 64, 32} }
 };
 
-static struct pxa3xx_nand_flash stm2GbX16 = {
-	.timing = &stm2GbX16_timing,
-	.cmdset	= &largepage_cmdset,
-	.page_per_block = 64,
-	.page_size = 2048,
-	.flash_width = 16,
-	.dfc_width = 16,
-	.num_blocks = 2048,
-	.chip_id = 0xba20,
+static struct nand_ecclayout ecc_layout_4KB_bch8bit = {
+	.eccbytes = 128,
+	.eccpos = {
+		32,  33,  34,  35,  36,  37,  38,  39,
+		40,  41,  42,  43,  44,  45,  46,  47,
+		48,  49,  50,  51,  52,  53,  54,  55,
+		56,  57,  58,  59,  60,  61,  62,  63},
+	.oobfree = { }
 };
 
-static struct pxa3xx_nand_flash *builtin_flash_types[] = {
-	&samsung512MbX16,
-	&samsung2GbX8,
-	&samsung32GbX8,
-	&micron1GbX8,
-	&micron1GbX16,
-	&micron4GbX8,
-	&micron4GbX16,
-	&stm2GbX16,
-};
-#endif /* CONFIG_MTD_NAND_PXA3xx_BUILTIN */
+/* Define a default flash type setting serve as flash detecting only */
+#define DEFAULT_FLASH_TYPE (&builtin_flash_types[0])
 
 #define NDTR0_tCH(c)	(min((c), 7) << 19)
 #define NDTR0_tCS(c)	(min((c), 7) << 16)
@@ -351,26 +334,36 @@ static struct pxa3xx_nand_flash *builtin_flash_types[] = {
 #define NDTR1_tWHR(c)	(min((c), 15) << 4)
 #define NDTR1_tAR(c)	(min((c), 15) << 0)
 
-#define tCH_NDTR0(r)	(((r) >> 19) & 0x7)
-#define tCS_NDTR0(r)	(((r) >> 16) & 0x7)
-#define tWH_NDTR0(r)	(((r) >> 11) & 0x7)
-#define tWP_NDTR0(r)	(((r) >> 8) & 0x7)
-#define tRH_NDTR0(r)	(((r) >> 3) & 0x7)
-#define tRP_NDTR0(r)	(((r) >> 0) & 0x7)
-
-#define tR_NDTR1(r)	(((r) >> 16) & 0xffff)
-#define tWHR_NDTR1(r)	(((r) >> 4) & 0xf)
-#define tAR_NDTR1(r)	(((r) >> 0) & 0xf)
-
 /* convert nano-seconds to nand flash controller clock cycles */
-#define ns2cycle(ns, clk)	(int)(((ns) * (clk / 1000000) / 1000) - 1)
+#define ns2cycle(ns, clk)	(int)((ns) * (clk / 1000000) / 1000)
+
+static const struct of_device_id pxa3xx_nand_dt_ids[] = {
+	{
+		.compatible = "marvell,pxa3xx-nand",
+		.data       = (void *)PXA3XX_NAND_VARIANT_PXA,
+	},
+	{
+		.compatible = "marvell,armada370-nand",
+		.data       = (void *)PXA3XX_NAND_VARIANT_ARMADA370,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, pxa3xx_nand_dt_ids);
 
-/* convert nand flash controller clock cycles to nano-seconds */
-#define cycle2ns(c, clk)	((((c) + 1) * 1000000 + clk / 500) / (clk / 1000))
+static enum pxa3xx_nand_variant
+pxa3xx_nand_get_variant(struct platform_device *pdev)
+{
+	const struct of_device_id *of_id =
+			of_match_device(pxa3xx_nand_dt_ids, &pdev->dev);
+	if (!of_id)
+		return PXA3XX_NAND_VARIANT_PXA;
+	return (enum pxa3xx_nand_variant)of_id->data;
+}
 
-static void pxa3xx_nand_set_timing(struct pxa3xx_nand_info *info,
+static void pxa3xx_nand_set_timing(struct pxa3xx_nand_host *host,
 				   const struct pxa3xx_nand_timing *t)
 {
+	struct pxa3xx_nand_info *info = host->info_data;
 	unsigned long nand_clk = clk_get_rate(info->clk);
 	uint32_t ndtr0, ndtr1;
 
@@ -385,106 +378,93 @@ static void pxa3xx_nand_set_timing(struct pxa3xx_nand_info *info,
 		NDTR1_tWHR(ns2cycle(t->tWHR, nand_clk)) |
 		NDTR1_tAR(ns2cycle(t->tAR, nand_clk));
 
+	info->ndtr0cs0 = ndtr0;
+	info->ndtr1cs0 = ndtr1;
 	nand_writel(info, NDTR0CS0, ndtr0);
 	nand_writel(info, NDTR1CS0, ndtr1);
 }
 
-#define WAIT_EVENT_TIMEOUT	10
-
-static int wait_for_event(struct pxa3xx_nand_info *info, uint32_t event)
+/*
+ * Set the data and OOB size, depending on the selected
+ * spare and ECC configuration.
+ * Only applicable to READ0, READOOB and PAGEPROG commands.
+ */
+static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info,
+				struct mtd_info *mtd)
 {
-	int timeout = WAIT_EVENT_TIMEOUT;
-	uint32_t ndsr;
+	int oob_enable = info->reg_ndcr & NDCR_SPARE_EN;
 
-	while (timeout--) {
-		ndsr = nand_readl(info, NDSR) & NDSR_MASK;
-		if (ndsr & event) {
-			nand_writel(info, NDSR, ndsr);
-			return 0;
-		}
-		udelay(10);
-	}
+	info->data_size = mtd->writesize;
+	if (!oob_enable)
+		return;
 
-	return -ETIMEDOUT;
+	info->oob_size = info->spare_size;
+	if (!info->use_ecc)
+		info->oob_size += info->ecc_size;
 }
 
-static int prepare_read_prog_cmd(struct pxa3xx_nand_info *info,
-			uint16_t cmd, int column, int page_addr)
+/**
+ * NOTE: it is a must to set ND_RUN firstly, then write
+ * command buffer, otherwise, it does not work.
+ * We enable all the interrupt at the same time, and
+ * let pxa3xx_nand_irq to handle all logic.
+ */
+static void pxa3xx_nand_start(struct pxa3xx_nand_info *info)
 {
-	const struct pxa3xx_nand_flash *f = info->flash_info;
-	const struct pxa3xx_nand_cmdset *cmdset = f->cmdset;
+	uint32_t ndcr;
 
-	/* calculate data size */
-	switch (f->page_size) {
-	case 2048:
-		info->data_size = (info->use_ecc) ? 2088 : 2112;
-		break;
-	case 512:
-		info->data_size = (info->use_ecc) ? 520 : 528;
-		break;
-	default:
-		return -EINVAL;
-	}
+	ndcr = info->reg_ndcr;
 
-	/* generate values for NDCBx registers */
-	info->ndcb0 = cmd | ((cmd & 0xff00) ? NDCB0_DBC : 0);
-	info->ndcb1 = 0;
-	info->ndcb2 = 0;
-	info->ndcb0 |= NDCB0_ADDR_CYC(info->row_addr_cycles + info->col_addr_cycles);
+	if (info->use_ecc) {
+		ndcr |= NDCR_ECC_EN;
+		if (info->ecc_bch)
+			nand_writel(info, NDECCCTRL, 0x1);
+	} else {
+		ndcr &= ~NDCR_ECC_EN;
+		if (info->ecc_bch)
+			nand_writel(info, NDECCCTRL, 0x0);
+	}
 
-	if (info->col_addr_cycles == 2) {
-		/* large block, 2 cycles for column address
-		 * row address starts from 3rd cycle
-		 */
-		info->ndcb1 |= page_addr << 16;
-		if (info->row_addr_cycles == 3)
-			info->ndcb2 = (page_addr >> 16) & 0xff;
-	} else
-		/* small block, 1 cycles for column address
-		 * row address starts from 2nd cycle
-		 */
-		info->ndcb1 = page_addr << 8;
+	if (info->use_dma)
+		ndcr |= NDCR_DMA_EN;
+	else
+		ndcr &= ~NDCR_DMA_EN;
 
-	if (cmd == cmdset->program)
-		info->ndcb0 |= NDCB0_CMD_TYPE(1) | NDCB0_AUTO_RS;
+	if (info->use_spare)
+		ndcr |= NDCR_SPARE_EN;
+	else
+		ndcr &= ~NDCR_SPARE_EN;
 
-	return 0;
-}
+	ndcr |= NDCR_ND_RUN;
 
-static int prepare_erase_cmd(struct pxa3xx_nand_info *info,
-			uint16_t cmd, int page_addr)
-{
-	info->ndcb0 = cmd | ((cmd & 0xff00) ? NDCB0_DBC : 0);
-	info->ndcb0 |= NDCB0_CMD_TYPE(2) | NDCB0_AUTO_RS | NDCB0_ADDR_CYC(3);
-	info->ndcb1 = page_addr;
-	info->ndcb2 = 0;
-	return 0;
+	/* clear status bits and run */
+	nand_writel(info, NDCR, 0);
+	nand_writel(info, NDSR, NDSR_MASK);
+	nand_writel(info, NDCR, ndcr);
 }
 
-static int prepare_other_cmd(struct pxa3xx_nand_info *info, uint16_t cmd)
+static void pxa3xx_nand_stop(struct pxa3xx_nand_info *info)
 {
-	const struct pxa3xx_nand_cmdset *cmdset = info->flash_info->cmdset;
-
-	info->ndcb0 = cmd | ((cmd & 0xff00) ? NDCB0_DBC : 0);
-	info->ndcb1 = 0;
-	info->ndcb2 = 0;
+	uint32_t ndcr;
+	int timeout = NAND_STOP_DELAY;
 
-	if (cmd == cmdset->read_id) {
-		info->ndcb0 |= NDCB0_CMD_TYPE(3);
-		info->data_size = 8;
-	} else if (cmd == cmdset->read_status) {
-		info->ndcb0 |= NDCB0_CMD_TYPE(4);
-		info->data_size = 8;
-	} else if (cmd == cmdset->reset || cmd == cmdset->lock ||
-		   cmd == cmdset->unlock) {
-		info->ndcb0 |= NDCB0_CMD_TYPE(5);
-	} else
-		return -EINVAL;
+	/* wait RUN bit in NDCR become 0 */
+	ndcr = nand_readl(info, NDCR);
+	while ((ndcr & NDCR_ND_RUN) && (timeout-- > 0)) {
+		ndcr = nand_readl(info, NDCR);
+		udelay(1);
+	}
 
-	return 0;
+	if (timeout <= 0) {
+		ndcr &= ~NDCR_ND_RUN;
+		nand_writel(info, NDCR, ndcr);
+	}
+	/* clear status bits */
+	nand_writel(info, NDSR, NDSR_MASK);
 }
 
-static void enable_int(struct pxa3xx_nand_info *info, uint32_t int_mask)
+static void __maybe_unused
+enable_int(struct pxa3xx_nand_info *info, uint32_t int_mask)
 {
 	uint32_t ndcr;
 
@@ -500,82 +480,67 @@ static void disable_int(struct pxa3xx_nand_info *info, uint32_t int_mask)
 	nand_writel(info, NDCR, ndcr | int_mask);
 }
 
-/* NOTE: it is a must to set ND_RUN firstly, then write command buffer
- * otherwise, it does not work
- */
-static int write_cmd(struct pxa3xx_nand_info *info)
+static void handle_data_pio(struct pxa3xx_nand_info *info)
 {
-	uint32_t ndcr;
-
-	/* clear status bits and run */
-	nand_writel(info, NDSR, NDSR_MASK);
-
-	ndcr = info->reg_ndcr;
-
-	ndcr |= info->use_ecc ? NDCR_ECC_EN : 0;
-	ndcr |= info->use_dma ? NDCR_DMA_EN : 0;
-	ndcr |= NDCR_ND_RUN;
-
-	nand_writel(info, NDCR, ndcr);
-
-	if (wait_for_event(info, NDSR_WRCMDREQ)) {
-		printk(KERN_ERR "timed out writing command\n");
-		return -ETIMEDOUT;
-	}
-
-	nand_writel(info, NDCB0, info->ndcb0);
-	nand_writel(info, NDCB0, info->ndcb1);
-	nand_writel(info, NDCB0, info->ndcb2);
-	return 0;
-}
-
-static int handle_data_pio(struct pxa3xx_nand_info *info)
-{
-	int ret, timeout = CHIP_DELAY_TIMEOUT;
+	unsigned int do_bytes = min(info->data_size, info->chunk_size);
 
 	switch (info->state) {
 	case STATE_PIO_WRITING:
-		__raw_writesl(info->mmio_base + NDDB, info->data_buff,
-				DIV_ROUND_UP(info->data_size, 4));
-
-		enable_int(info, NDSR_CS0_BBD | NDSR_CS0_CMDD);
-
-		ret = wait_for_completion_timeout(&info->cmd_complete, timeout);
-		if (!ret) {
-			printk(KERN_ERR "program command time out\n");
-			return -1;
-		}
+		__raw_writesl(info->mmio_base + NDDB,
+			      info->data_buff + info->data_buff_pos,
+			      DIV_ROUND_UP(do_bytes, 4));
+
+		if (info->oob_size > 0)
+			__raw_writesl(info->mmio_base + NDDB,
+				      info->oob_buff + info->oob_buff_pos,
+				      DIV_ROUND_UP(info->oob_size, 4));
 		break;
 	case STATE_PIO_READING:
-		__raw_readsl(info->mmio_base + NDDB, info->data_buff,
-				DIV_ROUND_UP(info->data_size, 4));
+		__raw_readsl(info->mmio_base + NDDB,
+			     info->data_buff + info->data_buff_pos,
+			     DIV_ROUND_UP(do_bytes, 4));
+
+		if (info->oob_size > 0)
+			__raw_readsl(info->mmio_base + NDDB,
+				     info->oob_buff + info->oob_buff_pos,
+				     DIV_ROUND_UP(info->oob_size, 4));
 		break;
 	default:
-		printk(KERN_ERR "%s: invalid state %d\n", __func__,
+		dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__,
 				info->state);
-		return -EINVAL;
+		BUG();
 	}
 
-	info->state = STATE_READY;
-	return 0;
+	/* Update buffer pointers for multi-page read/write */
+	info->data_buff_pos += do_bytes;
+	info->oob_buff_pos += info->oob_size;
+	info->data_size -= do_bytes;
 }
 
-static void start_data_dma(struct pxa3xx_nand_info *info, int dir_out)
+#ifdef ARCH_HAS_DMA
+static void start_data_dma(struct pxa3xx_nand_info *info)
 {
 	struct pxa_dma_desc *desc = info->data_desc;
-	int dma_len = ALIGN(info->data_size, 32);
+	int dma_len = ALIGN(info->data_size + info->oob_size, 32);
 
 	desc->ddadr = DDADR_STOP;
 	desc->dcmd = DCMD_ENDIRQEN | DCMD_WIDTH4 | DCMD_BURST32 | dma_len;
 
-	if (dir_out) {
+	switch (info->state) {
+	case STATE_DMA_WRITING:
 		desc->dsadr = info->data_buff_phys;
 		desc->dtadr = info->mmio_phys + NDDB;
 		desc->dcmd |= DCMD_INCSRCADDR | DCMD_FLOWTRG;
-	} else {
+		break;
+	case STATE_DMA_READING:
 		desc->dtadr = info->data_buff_phys;
 		desc->dsadr = info->mmio_phys + NDDB;
 		desc->dcmd |= DCMD_INCTRGADDR | DCMD_FLOWSRC;
+		break;
+	default:
+		dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__,
+				info->state);
+		BUG();
 	}
 
 	DRCMR(info->drcmr_dat) = DRCMR_MAPVLD | info->data_dma_ch;
@@ -593,99 +558,105 @@ static void pxa3xx_nand_data_dma_irq(int channel, void *data)
 
 	if (dcsr & DCSR_BUSERR) {
 		info->retcode = ERR_DMABUSERR;
-		complete(&info->cmd_complete);
 	}
 
-	if (info->state == STATE_DMA_WRITING) {
-		info->state = STATE_DMA_DONE;
-		enable_int(info, NDSR_CS0_BBD | NDSR_CS0_CMDD);
-	} else {
-		info->state = STATE_READY;
-		complete(&info->cmd_complete);
-	}
+	info->state = STATE_DMA_DONE;
+	enable_int(info, NDCR_INT_MASK);
+	nand_writel(info, NDSR, NDSR_WRDREQ | NDSR_RDDREQ);
 }
+#else
+static void start_data_dma(struct pxa3xx_nand_info *info)
+{}
+#endif
 
 static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
 {
 	struct pxa3xx_nand_info *info = devid;
-	unsigned int status;
-
-	status = nand_readl(info, NDSR);
+	unsigned int status, is_completed = 0, is_ready = 0;
+	unsigned int ready, cmd_done;
 
-	if (status & (NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR)) {
-		if (status & NDSR_DBERR)
-			info->retcode = ERR_DBERR;
-		else if (status & NDSR_SBERR)
-			info->retcode = ERR_SBERR;
+	if (info->cs == 0) {
+		ready           = NDSR_FLASH_RDY;
+		cmd_done        = NDSR_CS0_CMDD;
+	} else {
+		ready           = NDSR_RDY;
+		cmd_done        = NDSR_CS1_CMDD;
+	}
 
-		disable_int(info, NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR);
+	status = nand_readl(info, NDSR);
 
+	if (status & NDSR_UNCORERR)
+		info->retcode = ERR_UNCORERR;
+	if (status & NDSR_CORERR) {
+		info->retcode = ERR_CORERR;
+		if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 &&
+		    info->ecc_bch)
+			info->ecc_err_cnt = NDSR_ERR_CNT(status);
+		else
+			info->ecc_err_cnt = 1;
+
+		/*
+		 * Each chunk composing a page is corrected independently,
+		 * and we need to store maximum number of corrected bitflips
+		 * to return it to the MTD layer in ecc.read_page().
+		 */
+		info->max_bitflips = max_t(unsigned int,
+					   info->max_bitflips,
+					   info->ecc_err_cnt);
+	}
+	if (status & (NDSR_RDDREQ | NDSR_WRDREQ)) {
+		/* whether use dma to transfer data */
 		if (info->use_dma) {
-			info->state = STATE_DMA_READING;
-			start_data_dma(info, 0);
-		} else {
-			info->state = STATE_PIO_READING;
-			complete(&info->cmd_complete);
-		}
-	} else if (status & NDSR_WRDREQ) {
-		disable_int(info, NDSR_WRDREQ);
-		if (info->use_dma) {
-			info->state = STATE_DMA_WRITING;
-			start_data_dma(info, 1);
+			disable_int(info, NDCR_INT_MASK);
+			info->state = (status & NDSR_RDDREQ) ?
+				      STATE_DMA_READING : STATE_DMA_WRITING;
+			start_data_dma(info);
+			goto NORMAL_IRQ_EXIT;
 		} else {
-			info->state = STATE_PIO_WRITING;
-			complete(&info->cmd_complete);
+			info->state = (status & NDSR_RDDREQ) ?
+				      STATE_PIO_READING : STATE_PIO_WRITING;
+			handle_data_pio(info);
 		}
-	} else if (status & (NDSR_CS0_BBD | NDSR_CS0_CMDD)) {
-		if (status & NDSR_CS0_BBD)
-			info->retcode = ERR_BBERR;
-
-		disable_int(info, NDSR_CS0_BBD | NDSR_CS0_CMDD);
-		info->state = STATE_READY;
-		complete(&info->cmd_complete);
 	}
-	nand_writel(info, NDSR, status);
-	return IRQ_HANDLED;
-}
-
-static int pxa3xx_nand_do_cmd(struct pxa3xx_nand_info *info, uint32_t event)
-{
-	uint32_t ndcr;
-	int ret, timeout = CHIP_DELAY_TIMEOUT;
-
-	if (write_cmd(info)) {
-		info->retcode = ERR_SENDCMD;
-		goto fail_stop;
+	if (status & cmd_done) {
+		info->state = STATE_CMD_DONE;
+		is_completed = 1;
 	}
-
-	info->state = STATE_CMD_HANDLE;
-
-	enable_int(info, event);
-
-	ret = wait_for_completion_timeout(&info->cmd_complete, timeout);
-	if (!ret) {
-		printk(KERN_ERR "command execution timed out\n");
-		info->retcode = ERR_SENDCMD;
-		goto fail_stop;
+	if (status & ready) {
+		info->state = STATE_READY;
+		is_ready = 1;
 	}
 
-	if (info->use_dma == 0 && info->data_size > 0)
-		if (handle_data_pio(info))
-			goto fail_stop;
-
-	return 0;
+	if (status & NDSR_WRCMDREQ) {
+		nand_writel(info, NDSR, NDSR_WRCMDREQ);
+		status &= ~NDSR_WRCMDREQ;
+		info->state = STATE_CMD_HANDLE;
+
+		/*
+		 * Command buffer registers NDCB{0-2} (and optionally NDCB3)
+		 * must be loaded by writing directly either 12 or 16
+		 * bytes directly to NDCB0, four bytes at a time.
+		 *
+		 * Direct write access to NDCB1, NDCB2 and NDCB3 is ignored
+		 * but each NDCBx register can be read.
+		 */
+		nand_writel(info, NDCB0, info->ndcb0);
+		nand_writel(info, NDCB0, info->ndcb1);
+		nand_writel(info, NDCB0, info->ndcb2);
 
-fail_stop:
-	ndcr = nand_readl(info, NDCR);
-	nand_writel(info, NDCR, ndcr & ~NDCR_ND_RUN);
-	udelay(10);
-	return -ETIMEDOUT;
-}
+		/* NDCB3 register is available in NFCv2 (Armada 370/XP SoC) */
+		if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370)
+			nand_writel(info, NDCB0, info->ndcb3);
+	}
 
-static int pxa3xx_nand_dev_ready(struct mtd_info *mtd)
-{
-	struct pxa3xx_nand_info *info = mtd->priv;
-	return (nand_readl(info, NDSR) & NDSR_RDY) ? 1 : 0;
+	/* clear NDSR to let the controller exit the IRQ */
+	nand_writel(info, NDSR, status);
+	if (is_completed)
+		complete(&info->cmd_complete);
+	if (is_ready)
+		complete(&info->dev_ready);
+NORMAL_IRQ_EXIT:
+	return IRQ_HANDLED;
 }
 
 static inline int is_buf_blank(uint8_t *buf, size_t len)
@@ -696,131 +667,449 @@ static inline int is_buf_blank(uint8_t *buf, size_t len)
 	return 1;
 }
 
-static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
-				int column, int page_addr)
+static void set_command_address(struct pxa3xx_nand_info *info,
+		unsigned int page_size, uint16_t column, int page_addr)
 {
-	struct pxa3xx_nand_info *info = mtd->priv;
-	const struct pxa3xx_nand_flash *flash_info = info->flash_info;
-	const struct pxa3xx_nand_cmdset *cmdset = flash_info->cmdset;
-	int ret;
+	/* small page addr setting */
+	if (page_size < PAGE_CHUNK_SIZE) {
+		info->ndcb1 = ((page_addr & 0xFFFFFF) << 8)
+				| (column & 0xFF);
+
+		info->ndcb2 = 0;
+	} else {
+		info->ndcb1 = ((page_addr & 0xFFFF) << 16)
+				| (column & 0xFFFF);
 
-	info->use_dma = (use_dma) ? 1 : 0;
-	info->use_ecc = 0;
-	info->data_size = 0;
-	info->state = STATE_READY;
+		if (page_addr & 0xFF0000)
+			info->ndcb2 = (page_addr & 0xFF0000) >> 16;
+		else
+			info->ndcb2 = 0;
+	}
+}
 
-	init_completion(&info->cmd_complete);
+static void prepare_start_command(struct pxa3xx_nand_info *info, int command)
+{
+	struct pxa3xx_nand_host *host = info->host[info->cs];
+	struct mtd_info *mtd = host->mtd;
+
+	/* reset data and oob column point to handle data */
+	info->buf_start		= 0;
+	info->buf_count		= 0;
+	info->oob_size		= 0;
+	info->data_buff_pos	= 0;
+	info->oob_buff_pos	= 0;
+	info->use_ecc		= 0;
+	info->use_spare		= 1;
+	info->retcode		= ERR_NONE;
+	info->ecc_err_cnt	= 0;
+	info->ndcb3		= 0;
+	info->need_wait		= 0;
 
 	switch (command) {
+	case NAND_CMD_READ0:
+	case NAND_CMD_PAGEPROG:
+		info->use_ecc = 1;
 	case NAND_CMD_READOOB:
-		/* disable HW ECC to get all the OOB data */
+		pxa3xx_set_datasize(info, mtd);
+		break;
+	case NAND_CMD_PARAM:
+		info->use_spare = 0;
+		break;
+	default:
+		info->ndcb1 = 0;
+		info->ndcb2 = 0;
+		break;
+	}
+
+	/*
+	 * If we are about to issue a read command, or about to set
+	 * the write address, then clean the data buffer.
+	 */
+	if (command == NAND_CMD_READ0 ||
+	    command == NAND_CMD_READOOB ||
+	    command == NAND_CMD_SEQIN) {
+
 		info->buf_count = mtd->writesize + mtd->oobsize;
-		info->buf_start = mtd->writesize + column;
 		memset(info->data_buff, 0xFF, info->buf_count);
+	}
 
-		if (prepare_read_prog_cmd(info, cmdset->read1, column, page_addr))
-			break;
+}
 
-		pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR);
+static int prepare_set_command(struct pxa3xx_nand_info *info, int command,
+		int ext_cmd_type, uint16_t column, int page_addr)
+{
+	int addr_cycle, exec_cmd;
+	struct pxa3xx_nand_host *host;
+	struct mtd_info *mtd;
 
-		/* We only are OOB, so if the data has error, does not matter */
-		if (info->retcode == ERR_DBERR)
-			info->retcode = ERR_NONE;
-		break;
+	host = info->host[info->cs];
+	mtd = host->mtd;
+	addr_cycle = 0;
+	exec_cmd = 1;
+
+	if (info->cs != 0)
+		info->ndcb0 = NDCB0_CSEL;
+	else
+		info->ndcb0 = 0;
+
+	if (command == NAND_CMD_SEQIN)
+		exec_cmd = 0;
+
+	addr_cycle = NDCB0_ADDR_CYC(host->row_addr_cycles
+				    + host->col_addr_cycles);
 
+	switch (command) {
+	case NAND_CMD_READOOB:
 	case NAND_CMD_READ0:
-		info->use_ecc = 1;
-		info->retcode = ERR_NONE;
 		info->buf_start = column;
-		info->buf_count = mtd->writesize + mtd->oobsize;
-		memset(info->data_buff, 0xFF, info->buf_count);
-
-		if (prepare_read_prog_cmd(info, cmdset->read1, column, page_addr))
-			break;
+		info->ndcb0 |= NDCB0_CMD_TYPE(0)
+				| addr_cycle
+				| NAND_CMD_READ0;
 
-		pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR);
+		if (command == NAND_CMD_READOOB)
+			info->buf_start += mtd->writesize;
 
-		if (info->retcode == ERR_DBERR) {
-			/* for blank page (all 0xff), HW will calculate its ECC as
-			 * 0, which is different from the ECC information within
-			 * OOB, ignore such double bit errors
-			 */
-			if (is_buf_blank(info->data_buff, mtd->writesize))
-				info->retcode = ERR_NONE;
+		/*
+		 * Multiple page read needs an 'extended command type' field,
+		 * which is either naked-read or last-read according to the
+		 * state.
+		 */
+		if (mtd->writesize == PAGE_CHUNK_SIZE) {
+			info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8);
+		} else if (mtd->writesize > PAGE_CHUNK_SIZE) {
+			info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8)
+					| NDCB0_LEN_OVRD
+					| NDCB0_EXT_CMD_TYPE(ext_cmd_type);
+			info->ndcb3 = info->chunk_size +
+				      info->oob_size;
 		}
+
+		set_command_address(info, mtd->writesize, column, page_addr);
 		break;
+
 	case NAND_CMD_SEQIN:
+
 		info->buf_start = column;
-		info->buf_count = mtd->writesize + mtd->oobsize;
-		memset(info->data_buff, 0xff, info->buf_count);
+		set_command_address(info, mtd->writesize, 0, page_addr);
 
-		/* save column/page_addr for next CMD_PAGEPROG */
-		info->seqin_column = column;
-		info->seqin_page_addr = page_addr;
+		/*
+		 * Multiple page programming needs to execute the initial
+		 * SEQIN command that sets the page address.
+		 */
+		if (mtd->writesize > PAGE_CHUNK_SIZE) {
+			info->ndcb0 |= NDCB0_CMD_TYPE(0x1)
+				| NDCB0_EXT_CMD_TYPE(ext_cmd_type)
+				| addr_cycle
+				| command;
+			/* No data transfer in this case */
+			info->data_size = 0;
+			exec_cmd = 1;
+		}
 		break;
-	case NAND_CMD_PAGEPROG:
-		info->use_ecc = (info->seqin_column >= mtd->writesize) ? 0 : 1;
 
-		if (prepare_read_prog_cmd(info, cmdset->program,
-				info->seqin_column, info->seqin_page_addr))
+	case NAND_CMD_PAGEPROG:
+		if (is_buf_blank(info->data_buff,
+					(mtd->writesize + mtd->oobsize))) {
+			exec_cmd = 0;
 			break;
+		}
 
-		pxa3xx_nand_do_cmd(info, NDSR_WRDREQ);
-		break;
-	case NAND_CMD_ERASE1:
-		if (prepare_erase_cmd(info, cmdset->erase, page_addr))
-			break;
+		/* Second command setting for large pages */
+		if (mtd->writesize > PAGE_CHUNK_SIZE) {
+			/*
+			 * Multiple page write uses the 'extended command'
+			 * field. This can be used to issue a command dispatch
+			 * or a naked-write depending on the current stage.
+			 */
+			info->ndcb0 |= NDCB0_CMD_TYPE(0x1)
+					| NDCB0_LEN_OVRD
+					| NDCB0_EXT_CMD_TYPE(ext_cmd_type);
+			info->ndcb3 = info->chunk_size +
+				      info->oob_size;
 
-		pxa3xx_nand_do_cmd(info, NDSR_CS0_BBD | NDSR_CS0_CMDD);
+			/*
+			 * This is the command dispatch that completes a chunked
+			 * page program operation.
+			 */
+			if (info->data_size == 0) {
+				info->ndcb0 = NDCB0_CMD_TYPE(0x1)
+					| NDCB0_EXT_CMD_TYPE(ext_cmd_type)
+					| command;
+				info->ndcb1 = 0;
+				info->ndcb2 = 0;
+				info->ndcb3 = 0;
+			}
+		} else {
+			info->ndcb0 |= NDCB0_CMD_TYPE(0x1)
+					| NDCB0_AUTO_RS
+					| NDCB0_ST_ROW_EN
+					| NDCB0_DBC
+					| (NAND_CMD_PAGEPROG << 8)
+					| NAND_CMD_SEQIN
+					| addr_cycle;
+		}
 		break;
-	case NAND_CMD_ERASE2:
+
+	case NAND_CMD_PARAM:
+		info->buf_count = 256;
+		info->ndcb0 |= NDCB0_CMD_TYPE(0)
+				| NDCB0_ADDR_CYC(1)
+				| NDCB0_LEN_OVRD
+				| command;
+		info->ndcb1 = (column & 0xFF);
+		info->ndcb3 = 256;
+		info->data_size = 256;
 		break;
+
 	case NAND_CMD_READID:
+		info->buf_count = host->read_id_bytes;
+		info->ndcb0 |= NDCB0_CMD_TYPE(3)
+				| NDCB0_ADDR_CYC(1)
+				| command;
+		info->ndcb1 = (column & 0xFF);
+
+		info->data_size = 8;
+		break;
 	case NAND_CMD_STATUS:
-		info->use_dma = 0;	/* force PIO read */
-		info->buf_start = 0;
-		info->buf_count = (command == NAND_CMD_READID) ?
-				info->read_id_bytes : 1;
+		info->buf_count = 1;
+		info->ndcb0 |= NDCB0_CMD_TYPE(4)
+				| NDCB0_ADDR_CYC(1)
+				| command;
 
-		if (prepare_other_cmd(info, (command == NAND_CMD_READID) ?
-				cmdset->read_id : cmdset->read_status))
-			break;
+		info->data_size = 8;
+		break;
+
+	case NAND_CMD_ERASE1:
+		info->ndcb0 |= NDCB0_CMD_TYPE(2)
+				| NDCB0_AUTO_RS
+				| NDCB0_ADDR_CYC(3)
+				| NDCB0_DBC
+				| (NAND_CMD_ERASE2 << 8)
+				| NAND_CMD_ERASE1;
+		info->ndcb1 = page_addr;
+		info->ndcb2 = 0;
 
-		pxa3xx_nand_do_cmd(info, NDSR_RDDREQ);
 		break;
 	case NAND_CMD_RESET:
-		if (prepare_other_cmd(info, cmdset->reset))
-			break;
+		info->ndcb0 |= NDCB0_CMD_TYPE(5)
+				| command;
+
+		break;
 
-		ret = pxa3xx_nand_do_cmd(info, NDSR_CS0_CMDD);
-		if (ret == 0) {
-			int timeout = 2;
-			uint32_t ndcr;
+	case NAND_CMD_ERASE2:
+		exec_cmd = 0;
+		break;
 
-			while (timeout--) {
-				if (nand_readl(info, NDSR) & NDSR_RDY)
-					break;
-				msleep(10);
-			}
+	default:
+		exec_cmd = 0;
+		dev_err(&info->pdev->dev, "non-supported command %x\n",
+				command);
+		break;
+	}
+
+	return exec_cmd;
+}
+
+static void nand_cmdfunc(struct mtd_info *mtd, unsigned command,
+			 int column, int page_addr)
+{
+	struct pxa3xx_nand_host *host = mtd->priv;
+	struct pxa3xx_nand_info *info = host->info_data;
+	int ret, exec_cmd;
 
-			ndcr = nand_readl(info, NDCR);
-			nand_writel(info, NDCR, ndcr & ~NDCR_ND_RUN);
+	/*
+	 * if this is a x16 device ,then convert the input
+	 * "byte" address into a "word" address appropriate
+	 * for indexing a word-oriented device
+	 */
+	if (info->reg_ndcr & NDCR_DWIDTH_M)
+		column /= 2;
+
+	/*
+	 * There may be different NAND chip hooked to
+	 * different chip select, so check whether
+	 * chip select has been changed, if yes, reset the timing
+	 */
+	if (info->cs != host->cs) {
+		info->cs = host->cs;
+		nand_writel(info, NDTR0CS0, info->ndtr0cs0);
+		nand_writel(info, NDTR1CS0, info->ndtr1cs0);
+	}
+
+	prepare_start_command(info, command);
+
+	info->state = STATE_PREPARED;
+	exec_cmd = prepare_set_command(info, command, 0, column, page_addr);
+
+	if (exec_cmd) {
+		init_completion(&info->cmd_complete);
+		init_completion(&info->dev_ready);
+		info->need_wait = 1;
+		pxa3xx_nand_start(info);
+
+		ret = wait_for_completion_timeout(&info->cmd_complete,
+				CHIP_DELAY_TIMEOUT);
+		if (!ret) {
+			dev_err(&info->pdev->dev, "Wait time out!!!\n");
+			/* Stop State Machine for next command cycle */
+			pxa3xx_nand_stop(info);
 		}
+	}
+	info->state = STATE_IDLE;
+}
+
+static void nand_cmdfunc_extended(struct mtd_info *mtd,
+				  const unsigned command,
+				  int column, int page_addr)
+{
+	struct pxa3xx_nand_host *host = mtd->priv;
+	struct pxa3xx_nand_info *info = host->info_data;
+	int ret, exec_cmd, ext_cmd_type;
+
+	/*
+	 * if this is a x16 device then convert the input
+	 * "byte" address into a "word" address appropriate
+	 * for indexing a word-oriented device
+	 */
+	if (info->reg_ndcr & NDCR_DWIDTH_M)
+		column /= 2;
+
+	/*
+	 * There may be different NAND chip hooked to
+	 * different chip select, so check whether
+	 * chip select has been changed, if yes, reset the timing
+	 */
+	if (info->cs != host->cs) {
+		info->cs = host->cs;
+		nand_writel(info, NDTR0CS0, info->ndtr0cs0);
+		nand_writel(info, NDTR1CS0, info->ndtr1cs0);
+	}
+
+	/* Select the extended command for the first command */
+	switch (command) {
+	case NAND_CMD_READ0:
+	case NAND_CMD_READOOB:
+		ext_cmd_type = EXT_CMD_TYPE_MONO;
+		break;
+	case NAND_CMD_SEQIN:
+		ext_cmd_type = EXT_CMD_TYPE_DISPATCH;
+		break;
+	case NAND_CMD_PAGEPROG:
+		ext_cmd_type = EXT_CMD_TYPE_NAKED_RW;
 		break;
 	default:
-		printk(KERN_ERR "non-supported command.\n");
+		ext_cmd_type = 0;
 		break;
 	}
 
-	if (info->retcode == ERR_DBERR) {
-		printk(KERN_ERR "double bit error @ page %08x\n", page_addr);
-		info->retcode = ERR_NONE;
+	prepare_start_command(info, command);
+
+	/*
+	 * Prepare the "is ready" completion before starting a command
+	 * transaction sequence. If the command is not executed the
+	 * completion will be completed, see below.
+	 *
+	 * We can do that inside the loop because the command variable
+	 * is invariant and thus so is the exec_cmd.
+	 */
+	info->need_wait = 1;
+	init_completion(&info->dev_ready);
+	do {
+		info->state = STATE_PREPARED;
+		exec_cmd = prepare_set_command(info, command, ext_cmd_type,
+					       column, page_addr);
+		if (!exec_cmd) {
+			info->need_wait = 0;
+			complete(&info->dev_ready);
+			break;
+		}
+
+		init_completion(&info->cmd_complete);
+		pxa3xx_nand_start(info);
+
+		ret = wait_for_completion_timeout(&info->cmd_complete,
+				CHIP_DELAY_TIMEOUT);
+		if (!ret) {
+			dev_err(&info->pdev->dev, "Wait time out!!!\n");
+			/* Stop State Machine for next command cycle */
+			pxa3xx_nand_stop(info);
+			break;
+		}
+
+		/* Check if the sequence is complete */
+		if (info->data_size == 0 && command != NAND_CMD_PAGEPROG)
+			break;
+
+		/*
+		 * After a splitted program command sequence has issued
+		 * the command dispatch, the command sequence is complete.
+		 */
+		if (info->data_size == 0 &&
+		    command == NAND_CMD_PAGEPROG &&
+		    ext_cmd_type == EXT_CMD_TYPE_DISPATCH)
+			break;
+
+		if (command == NAND_CMD_READ0 || command == NAND_CMD_READOOB) {
+			/* Last read: issue a 'last naked read' */
+			if (info->data_size == info->chunk_size)
+				ext_cmd_type = EXT_CMD_TYPE_LAST_RW;
+			else
+				ext_cmd_type = EXT_CMD_TYPE_NAKED_RW;
+
+		/*
+		 * If a splitted program command has no more data to transfer,
+		 * the command dispatch must be issued to complete.
+		 */
+		} else if (command == NAND_CMD_PAGEPROG &&
+			   info->data_size == 0) {
+				ext_cmd_type = EXT_CMD_TYPE_DISPATCH;
+		}
+	} while (1);
+
+	info->state = STATE_IDLE;
+}
+
+static int pxa3xx_nand_write_page_hwecc(struct mtd_info *mtd,
+		struct nand_chip *chip, const uint8_t *buf, int oob_required)
+{
+	chip->write_buf(mtd, buf, mtd->writesize);
+	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	return 0;
+}
+
+static int pxa3xx_nand_read_page_hwecc(struct mtd_info *mtd,
+		struct nand_chip *chip, uint8_t *buf, int oob_required,
+		int page)
+{
+	struct pxa3xx_nand_host *host = mtd->priv;
+	struct pxa3xx_nand_info *info = host->info_data;
+
+	chip->read_buf(mtd, buf, mtd->writesize);
+	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	if (info->retcode == ERR_CORERR && info->use_ecc) {
+		mtd->ecc_stats.corrected += info->ecc_err_cnt;
+
+	} else if (info->retcode == ERR_UNCORERR) {
+		/*
+		 * for blank page (all 0xff), HW will calculate its ECC as
+		 * 0, which is different from the ECC information within
+		 * OOB, ignore such uncorrectable errors
+		 */
+		if (is_buf_blank(buf, mtd->writesize))
+			info->retcode = ERR_NONE;
+		else
+			mtd->ecc_stats.failed++;
 	}
+
+	return info->max_bitflips;
 }
 
 static uint8_t pxa3xx_nand_read_byte(struct mtd_info *mtd)
 {
-	struct pxa3xx_nand_info *info = mtd->priv;
+	struct pxa3xx_nand_host *host = mtd->priv;
+	struct pxa3xx_nand_info *info = host->info_data;
 	char retval = 0xFF;
 
 	if (info->buf_start < info->buf_count)
@@ -832,7 +1121,8 @@ static uint8_t pxa3xx_nand_read_byte(struct mtd_info *mtd)
 
 static u16 pxa3xx_nand_read_word(struct mtd_info *mtd)
 {
-	struct pxa3xx_nand_info *info = mtd->priv;
+	struct pxa3xx_nand_host *host = mtd->priv;
+	struct pxa3xx_nand_info *info = host->info_data;
 	u16 retval = 0xFFFF;
 
 	if (!(info->buf_start & 0x01) && info->buf_start < info->buf_count) {
@@ -844,7 +1134,8 @@ static u16 pxa3xx_nand_read_word(struct mtd_info *mtd)
 
 static void pxa3xx_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
 {
-	struct pxa3xx_nand_info *info = mtd->priv;
+	struct pxa3xx_nand_host *host = mtd->priv;
+	struct pxa3xx_nand_info *info = host->info_data;
 	int real_len = min_t(size_t, len, info->buf_count - info->buf_start);
 
 	memcpy(buf, info->data_buff + info->buf_start, real_len);
@@ -854,19 +1145,14 @@ static void pxa3xx_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
 static void pxa3xx_nand_write_buf(struct mtd_info *mtd,
 		const uint8_t *buf, int len)
 {
-	struct pxa3xx_nand_info *info = mtd->priv;
+	struct pxa3xx_nand_host *host = mtd->priv;
+	struct pxa3xx_nand_info *info = host->info_data;
 	int real_len = min_t(size_t, len, info->buf_count - info->buf_start);
 
 	memcpy(info->data_buff + info->buf_start, buf, real_len);
 	info->buf_start += real_len;
 }
 
-static int pxa3xx_nand_verify_buf(struct mtd_info *mtd,
-		const uint8_t *buf, int len)
-{
-	return 0;
-}
-
 static void pxa3xx_nand_select_chip(struct mtd_info *mtd, int chip)
 {
 	return;
@@ -874,276 +1160,121 @@ static void pxa3xx_nand_select_chip(struct mtd_info *mtd, int chip)
 
 static int pxa3xx_nand_waitfunc(struct mtd_info *mtd, struct nand_chip *this)
 {
-	struct pxa3xx_nand_info *info = mtd->priv;
+	struct pxa3xx_nand_host *host = mtd->priv;
+	struct pxa3xx_nand_info *info = host->info_data;
+	int ret;
+
+	if (info->need_wait) {
+		ret = wait_for_completion_timeout(&info->dev_ready,
+				CHIP_DELAY_TIMEOUT);
+		info->need_wait = 0;
+		if (!ret) {
+			dev_err(&info->pdev->dev, "Ready time out!!!\n");
+			return NAND_STATUS_FAIL;
+		}
+	}
 
 	/* pxa3xx_nand_send_command has waited for command complete */
 	if (this->state == FL_WRITING || this->state == FL_ERASING) {
 		if (info->retcode == ERR_NONE)
 			return 0;
-		else {
-			/*
-			 * any error make it return 0x01 which will tell
-			 * the caller the erase and write fail
-			 */
-			return 0x01;
-		}
-	}
-
-	return 0;
-}
-
-static void pxa3xx_nand_ecc_hwctl(struct mtd_info *mtd, int mode)
-{
-	return;
-}
-
-static int pxa3xx_nand_ecc_calculate(struct mtd_info *mtd,
-		const uint8_t *dat, uint8_t *ecc_code)
-{
-	return 0;
-}
-
-static int pxa3xx_nand_ecc_correct(struct mtd_info *mtd,
-		uint8_t *dat, uint8_t *read_ecc, uint8_t *calc_ecc)
-{
-	struct pxa3xx_nand_info *info = mtd->priv;
-	/*
-	 * Any error include ERR_SEND_CMD, ERR_DBERR, ERR_BUSERR, we
-	 * consider it as a ecc error which will tell the caller the
-	 * read fail We have distinguish all the errors, but the
-	 * nand_read_ecc only check this function return value
-	 *
-	 * Corrected (single-bit) errors must also be noted.
-	 */
-	if (info->retcode == ERR_SBERR)
-		return 1;
-	else if (info->retcode != ERR_NONE)
-		return -1;
-
-	return 0;
-}
-
-static int __readid(struct pxa3xx_nand_info *info, uint32_t *id)
-{
-	const struct pxa3xx_nand_flash *f = info->flash_info;
-	const struct pxa3xx_nand_cmdset *cmdset = f->cmdset;
-	uint32_t ndcr;
-	uint8_t  id_buff[8];
-
-	if (prepare_other_cmd(info, cmdset->read_id)) {
-		printk(KERN_ERR "failed to prepare command\n");
-		return -EINVAL;
+		else
+			return NAND_STATUS_FAIL;
 	}
 
-	/* Send command */
-	if (write_cmd(info))
-		goto fail_timeout;
-
-	/* Wait for CMDDM(command done successfully) */
-	if (wait_for_event(info, NDSR_RDDREQ))
-		goto fail_timeout;
-
-	__raw_readsl(info->mmio_base + NDDB, id_buff, 2);
-	*id = id_buff[0] | (id_buff[1] << 8);
-	return 0;
-
-fail_timeout:
-	ndcr = nand_readl(info, NDCR);
-	nand_writel(info, NDCR, ndcr & ~NDCR_ND_RUN);
-	udelay(10);
-	return -ETIMEDOUT;
+	return NAND_STATUS_READY;
 }
 
 static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info,
 				    const struct pxa3xx_nand_flash *f)
 {
 	struct platform_device *pdev = info->pdev;
-	struct pxa3xx_nand_platform_data *pdata = pdev->dev.platform_data;
-	uint32_t ndcr = 0x00000FFF; /* disable all interrupts */
+	struct pxa3xx_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct pxa3xx_nand_host *host = info->host[info->cs];
+	uint32_t ndcr = 0x0; /* enable all interrupts */
 
-	if (f->page_size != 2048 && f->page_size != 512)
+	if (f->page_size != 2048 && f->page_size != 512) {
+		dev_err(&pdev->dev, "Current only support 2048 and 512 size\n");
 		return -EINVAL;
+	}
 
-	if (f->flash_width != 16 && f->flash_width != 8)
+	if (f->flash_width != 16 && f->flash_width != 8) {
+		dev_err(&pdev->dev, "Only support 8bit and 16 bit!\n");
 		return -EINVAL;
+	}
 
 	/* calculate flash information */
-	info->oob_size = (f->page_size == 2048) ? 64 : 16;
-	info->read_id_bytes = (f->page_size == 2048) ? 4 : 2;
+	host->read_id_bytes = (f->page_size == 2048) ? 4 : 2;
 
 	/* calculate addressing information */
-	info->col_addr_cycles = (f->page_size == 2048) ? 2 : 1;
+	host->col_addr_cycles = (f->page_size == 2048) ? 2 : 1;
 
 	if (f->num_blocks * f->page_per_block > 65536)
-		info->row_addr_cycles = 3;
+		host->row_addr_cycles = 3;
 	else
-		info->row_addr_cycles = 2;
+		host->row_addr_cycles = 2;
 
 	ndcr |= (pdata->enable_arbiter) ? NDCR_ND_ARB_EN : 0;
-	ndcr |= (info->col_addr_cycles == 2) ? NDCR_RA_START : 0;
+	ndcr |= (host->col_addr_cycles == 2) ? NDCR_RA_START : 0;
 	ndcr |= (f->page_per_block == 64) ? NDCR_PG_PER_BLK : 0;
 	ndcr |= (f->page_size == 2048) ? NDCR_PAGE_SZ : 0;
 	ndcr |= (f->flash_width == 16) ? NDCR_DWIDTH_M : 0;
 	ndcr |= (f->dfc_width == 16) ? NDCR_DWIDTH_C : 0;
 
-	ndcr |= NDCR_RD_ID_CNT(info->read_id_bytes);
+	ndcr |= NDCR_RD_ID_CNT(host->read_id_bytes);
 	ndcr |= NDCR_SPARE_EN; /* enable spare by default */
 
 	info->reg_ndcr = ndcr;
 
-	pxa3xx_nand_set_timing(info, f->timing);
-	info->flash_info = f;
+	pxa3xx_nand_set_timing(host, f->timing);
 	return 0;
 }
 
-static void pxa3xx_nand_detect_timing(struct pxa3xx_nand_info *info,
-				      struct pxa3xx_nand_timing *t)
-{
-	unsigned long nand_clk = clk_get_rate(info->clk);
-	uint32_t ndtr0 = nand_readl(info, NDTR0CS0);
-	uint32_t ndtr1 = nand_readl(info, NDTR1CS0);
-
-	t->tCH = cycle2ns(tCH_NDTR0(ndtr0), nand_clk);
-	t->tCS = cycle2ns(tCS_NDTR0(ndtr0), nand_clk);
-	t->tWH = cycle2ns(tWH_NDTR0(ndtr0), nand_clk);
-	t->tWP = cycle2ns(tWP_NDTR0(ndtr0), nand_clk);
-	t->tRH = cycle2ns(tRH_NDTR0(ndtr0), nand_clk);
-	t->tRP = cycle2ns(tRP_NDTR0(ndtr0), nand_clk);
-
-	t->tR = cycle2ns(tR_NDTR1(ndtr1), nand_clk);
-	t->tWHR = cycle2ns(tWHR_NDTR1(ndtr1), nand_clk);
-	t->tAR = cycle2ns(tAR_NDTR1(ndtr1), nand_clk);
-}
-
 static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info)
 {
+	/*
+	 * We set 0 by hard coding here, for we don't support keep_config
+	 * when there is more than one chip attached to the controller
+	 */
+	struct pxa3xx_nand_host *host = info->host[0];
 	uint32_t ndcr = nand_readl(info, NDCR);
-	struct nand_flash_dev *type = NULL;
-	uint32_t id = -1;
-	int i;
-
-	default_flash.page_per_block = ndcr & NDCR_PG_PER_BLK ? 64 : 32;
-	default_flash.page_size = ndcr & NDCR_PAGE_SZ ? 2048 : 512;
-	default_flash.flash_width = ndcr & NDCR_DWIDTH_M ? 16 : 8;
-	default_flash.dfc_width = ndcr & NDCR_DWIDTH_C ? 16 : 8;
-
-	if (default_flash.page_size == 2048)
-		default_flash.cmdset = &largepage_cmdset;
-	else
-		default_flash.cmdset = &smallpage_cmdset;
 
-	/* set info fields needed to __readid */
-	info->flash_info = &default_flash;
-	info->read_id_bytes = (default_flash.page_size == 2048) ? 4 : 2;
-	info->reg_ndcr = ndcr;
-
-	if (__readid(info, &id))
-		return -ENODEV;
-
-	/* Lookup the flash id */
-	id = (id >> 8) & 0xff;		/* device id is byte 2 */
-	for (i = 0; nand_flash_ids[i].name != NULL; i++) {
-		if (id == nand_flash_ids[i].id) {
-			type =  &nand_flash_ids[i];
-			break;
-		}
+	if (ndcr & NDCR_PAGE_SZ) {
+		/* Controller's FIFO size */
+		info->chunk_size = 2048;
+		host->read_id_bytes = 4;
+	} else {
+		info->chunk_size = 512;
+		host->read_id_bytes = 2;
 	}
 
-	if (!type)
-		return -ENODEV;
-
-	/* fill the missing flash information */
-	i = __ffs(default_flash.page_per_block * default_flash.page_size);
-	default_flash.num_blocks = type->chipsize << (20 - i);
-
-	info->oob_size = (default_flash.page_size == 2048) ? 64 : 16;
-
-	/* calculate addressing information */
-	info->col_addr_cycles = (default_flash.page_size == 2048) ? 2 : 1;
-
-	if (default_flash.num_blocks * default_flash.page_per_block > 65536)
-		info->row_addr_cycles = 3;
-	else
-		info->row_addr_cycles = 2;
-
-	pxa3xx_nand_detect_timing(info, &default_timing);
-	default_flash.timing = &default_timing;
-
+	/* Set an initial chunk size */
+	info->reg_ndcr = ndcr & ~NDCR_INT_MASK;
+	info->ndtr0cs0 = nand_readl(info, NDTR0CS0);
+	info->ndtr1cs0 = nand_readl(info, NDTR1CS0);
 	return 0;
 }
 
-static int pxa3xx_nand_detect_flash(struct pxa3xx_nand_info *info,
-				    const struct pxa3xx_nand_platform_data *pdata)
-{
-	const struct pxa3xx_nand_flash *f;
-	uint32_t id = -1;
-	int i;
-
-	if (pdata->keep_config)
-		if (pxa3xx_nand_detect_config(info) == 0)
-			return 0;
-
-	for (i = 0; i<pdata->num_flash; ++i) {
-		f = pdata->flash + i;
-
-		if (pxa3xx_nand_config_flash(info, f))
-			continue;
-
-		if (__readid(info, &id))
-			continue;
-
-		if (id == f->chip_id)
-			return 0;
-	}
-
-#ifdef CONFIG_MTD_NAND_PXA3xx_BUILTIN
-	for (i = 0; i < ARRAY_SIZE(builtin_flash_types); i++) {
-
-		f = builtin_flash_types[i];
-
-		if (pxa3xx_nand_config_flash(info, f))
-			continue;
-
-		if (__readid(info, &id))
-			continue;
-
-		if (id == f->chip_id)
-			return 0;
-	}
-#endif
-
-	dev_warn(&info->pdev->dev,
-		 "failed to detect configured nand flash; found %04x instead of\n",
-		 id);
-	return -ENODEV;
-}
-
-/* the maximum possible buffer size for large page with OOB data
- * is: 2048 + 64 = 2112 bytes, allocate a page here for both the
- * data buffer and the DMA descriptor
- */
-#define MAX_BUFF_SIZE	PAGE_SIZE
-
+#ifdef ARCH_HAS_DMA
 static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info)
 {
 	struct platform_device *pdev = info->pdev;
-	int data_desc_offset = MAX_BUFF_SIZE - sizeof(struct pxa_dma_desc);
+	int data_desc_offset = info->buf_size - sizeof(struct pxa_dma_desc);
 
 	if (use_dma == 0) {
-		info->data_buff = kmalloc(MAX_BUFF_SIZE, GFP_KERNEL);
+		info->data_buff = kmalloc(info->buf_size, GFP_KERNEL);
 		if (info->data_buff == NULL)
 			return -ENOMEM;
 		return 0;
 	}
 
-	info->data_buff = dma_alloc_coherent(&pdev->dev, MAX_BUFF_SIZE,
+	info->data_buff = dma_alloc_coherent(&pdev->dev, info->buf_size,
 				&info->data_buff_phys, GFP_KERNEL);
 	if (info->data_buff == NULL) {
 		dev_err(&pdev->dev, "failed to allocate dma buffer\n");
 		return -ENOMEM;
 	}
 
-	info->data_buff_size = MAX_BUFF_SIZE;
 	info->data_desc = (void *)info->data_buff + data_desc_offset;
 	info->data_desc_addr = info->data_buff_phys + data_desc_offset;
 
@@ -1151,263 +1282,589 @@ static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info)
 				pxa3xx_nand_data_dma_irq, info);
 	if (info->data_dma_ch < 0) {
 		dev_err(&pdev->dev, "failed to request data dma\n");
-		dma_free_coherent(&pdev->dev, info->data_buff_size,
+		dma_free_coherent(&pdev->dev, info->buf_size,
 				info->data_buff, info->data_buff_phys);
 		return info->data_dma_ch;
 	}
 
+	/*
+	 * Now that DMA buffers are allocated we turn on
+	 * DMA proper for I/O operations.
+	 */
+	info->use_dma = 1;
 	return 0;
 }
 
-static struct nand_ecclayout hw_smallpage_ecclayout = {
-	.eccbytes = 6,
-	.eccpos = {8, 9, 10, 11, 12, 13 },
-	.oobfree = { {2, 6} }
-};
+static void pxa3xx_nand_free_buff(struct pxa3xx_nand_info *info)
+{
+	struct platform_device *pdev = info->pdev;
+	if (info->use_dma) {
+		pxa_free_dma(info->data_dma_ch);
+		dma_free_coherent(&pdev->dev, info->buf_size,
+				  info->data_buff, info->data_buff_phys);
+	} else {
+		kfree(info->data_buff);
+	}
+}
+#else
+static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info)
+{
+	info->data_buff = kmalloc(info->buf_size, GFP_KERNEL);
+	if (info->data_buff == NULL)
+		return -ENOMEM;
+	return 0;
+}
 
-static struct nand_ecclayout hw_largepage_ecclayout = {
-	.eccbytes = 24,
-	.eccpos = {
-		40, 41, 42, 43, 44, 45, 46, 47,
-		48, 49, 50, 51, 52, 53, 54, 55,
-		56, 57, 58, 59, 60, 61, 62, 63},
-	.oobfree = { {2, 38} }
-};
+static void pxa3xx_nand_free_buff(struct pxa3xx_nand_info *info)
+{
+	kfree(info->data_buff);
+}
+#endif
 
-static void pxa3xx_nand_init_mtd(struct mtd_info *mtd,
-				 struct pxa3xx_nand_info *info)
+static int pxa3xx_nand_sensing(struct pxa3xx_nand_info *info)
 {
-	const struct pxa3xx_nand_flash *f = info->flash_info;
-	struct nand_chip *this = &info->nand_chip;
-
-	this->options = (f->flash_width == 16) ? NAND_BUSWIDTH_16: 0;
-
-	this->waitfunc		= pxa3xx_nand_waitfunc;
-	this->select_chip	= pxa3xx_nand_select_chip;
-	this->dev_ready		= pxa3xx_nand_dev_ready;
-	this->cmdfunc		= pxa3xx_nand_cmdfunc;
-	this->read_word		= pxa3xx_nand_read_word;
-	this->read_byte		= pxa3xx_nand_read_byte;
-	this->read_buf		= pxa3xx_nand_read_buf;
-	this->write_buf		= pxa3xx_nand_write_buf;
-	this->verify_buf	= pxa3xx_nand_verify_buf;
-
-	this->ecc.mode		= NAND_ECC_HW;
-	this->ecc.hwctl		= pxa3xx_nand_ecc_hwctl;
-	this->ecc.calculate	= pxa3xx_nand_ecc_calculate;
-	this->ecc.correct	= pxa3xx_nand_ecc_correct;
-	this->ecc.size		= f->page_size;
-
-	if (f->page_size == 2048)
-		this->ecc.layout = &hw_largepage_ecclayout;
-	else
-		this->ecc.layout = &hw_smallpage_ecclayout;
+	struct mtd_info *mtd;
+	struct nand_chip *chip;
+	int ret;
+
+	mtd = info->host[info->cs]->mtd;
+	chip = mtd->priv;
+
+	/* use the common timing to make a try */
+	ret = pxa3xx_nand_config_flash(info, &builtin_flash_types[0]);
+	if (ret)
+		return ret;
 
-	this->chip_delay = 25;
+	chip->cmdfunc(mtd, NAND_CMD_RESET, 0, 0);
+	ret = chip->waitfunc(mtd, chip);
+	if (ret & NAND_STATUS_FAIL)
+		return -ENODEV;
+
+	return 0;
 }
 
-static int pxa3xx_nand_probe(struct platform_device *pdev)
+static int pxa_ecc_init(struct pxa3xx_nand_info *info,
+			struct nand_ecc_ctrl *ecc,
+			int strength, int ecc_stepsize, int page_size)
 {
-	struct pxa3xx_nand_platform_data *pdata;
-	struct pxa3xx_nand_info *info;
-	struct nand_chip *this;
-	struct mtd_info *mtd;
-	struct resource *r;
-	int ret = 0, irq;
+	if (strength == 1 && ecc_stepsize == 512 && page_size == 2048) {
+		info->chunk_size = 2048;
+		info->spare_size = 40;
+		info->ecc_size = 24;
+		ecc->mode = NAND_ECC_HW;
+		ecc->size = 512;
+		ecc->strength = 1;
+
+	} else if (strength == 1 && ecc_stepsize == 512 && page_size == 512) {
+		info->chunk_size = 512;
+		info->spare_size = 8;
+		info->ecc_size = 8;
+		ecc->mode = NAND_ECC_HW;
+		ecc->size = 512;
+		ecc->strength = 1;
 
-	pdata = pdev->dev.platform_data;
+	/*
+	 * Required ECC: 4-bit correction per 512 bytes
+	 * Select: 16-bit correction per 2048 bytes
+	 */
+	} else if (strength == 4 && ecc_stepsize == 512 && page_size == 2048) {
+		info->ecc_bch = 1;
+		info->chunk_size = 2048;
+		info->spare_size = 32;
+		info->ecc_size = 32;
+		ecc->mode = NAND_ECC_HW;
+		ecc->size = info->chunk_size;
+		ecc->layout = &ecc_layout_2KB_bch4bit;
+		ecc->strength = 16;
+
+	} else if (strength == 4 && ecc_stepsize == 512 && page_size == 4096) {
+		info->ecc_bch = 1;
+		info->chunk_size = 2048;
+		info->spare_size = 32;
+		info->ecc_size = 32;
+		ecc->mode = NAND_ECC_HW;
+		ecc->size = info->chunk_size;
+		ecc->layout = &ecc_layout_4KB_bch4bit;
+		ecc->strength = 16;
 
-	if (!pdata) {
-		dev_err(&pdev->dev, "no platform data defined\n");
+	/*
+	 * Required ECC: 8-bit correction per 512 bytes
+	 * Select: 16-bit correction per 1024 bytes
+	 */
+	} else if (strength == 8 && ecc_stepsize == 512 && page_size == 4096) {
+		info->ecc_bch = 1;
+		info->chunk_size = 1024;
+		info->spare_size = 0;
+		info->ecc_size = 32;
+		ecc->mode = NAND_ECC_HW;
+		ecc->size = info->chunk_size;
+		ecc->layout = &ecc_layout_4KB_bch8bit;
+		ecc->strength = 16;
+	} else {
+		dev_err(&info->pdev->dev,
+			"ECC strength %d at page size %d is not supported\n",
+			strength, page_size);
 		return -ENODEV;
 	}
 
-	mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct pxa3xx_nand_info),
-			GFP_KERNEL);
-	if (!mtd) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
-		return -ENOMEM;
+	dev_info(&info->pdev->dev, "ECC strength %d, ECC step size %d\n",
+		 ecc->strength, ecc->size);
+	return 0;
+}
+
+static int pxa3xx_nand_scan(struct mtd_info *mtd)
+{
+	struct pxa3xx_nand_host *host = mtd->priv;
+	struct pxa3xx_nand_info *info = host->info_data;
+	struct platform_device *pdev = info->pdev;
+	struct pxa3xx_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct nand_flash_dev pxa3xx_flash_ids[2], *def = NULL;
+	const struct pxa3xx_nand_flash *f = NULL;
+	struct nand_chip *chip = mtd->priv;
+	uint32_t id = -1;
+	uint64_t chipsize;
+	int i, ret, num;
+	uint16_t ecc_strength, ecc_step;
+
+	if (pdata->keep_config && !pxa3xx_nand_detect_config(info))
+		goto KEEP_CONFIG;
+
+	ret = pxa3xx_nand_sensing(info);
+	if (ret) {
+		dev_info(&info->pdev->dev, "There is no chip on cs %d!\n",
+			 info->cs);
+
+		return ret;
 	}
 
-	info = (struct pxa3xx_nand_info *)(&mtd[1]);
-	info->pdev = pdev;
+	chip->cmdfunc(mtd, NAND_CMD_READID, 0, 0);
+	id = *((uint16_t *)(info->data_buff));
+	if (id != 0)
+		dev_info(&info->pdev->dev, "Detect a flash id %x\n", id);
+	else {
+		dev_warn(&info->pdev->dev,
+			 "Read out ID 0, potential timing set wrong!!\n");
+
+		return -EINVAL;
+	}
 
-	this = &info->nand_chip;
-	mtd->priv = info;
-	mtd->owner = THIS_MODULE;
+	num = ARRAY_SIZE(builtin_flash_types) + pdata->num_flash - 1;
+	for (i = 0; i < num; i++) {
+		if (i < pdata->num_flash)
+			f = pdata->flash + i;
+		else
+			f = &builtin_flash_types[i - pdata->num_flash + 1];
 
-	info->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(info->clk)) {
-		dev_err(&pdev->dev, "failed to get nand clock\n");
-		ret = PTR_ERR(info->clk);
-		goto fail_free_mtd;
+		/* find the chip in default list */
+		if (f->chip_id == id)
+			break;
 	}
-	clk_enable(info->clk);
 
-	r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-	if (r == NULL) {
-		dev_err(&pdev->dev, "no resource defined for data DMA\n");
-		ret = -ENXIO;
-		goto fail_put_clk;
+	if (i >= (ARRAY_SIZE(builtin_flash_types) + pdata->num_flash - 1)) {
+		dev_err(&info->pdev->dev, "ERROR!! flash not defined!!!\n");
+
+		return -EINVAL;
 	}
-	info->drcmr_dat = r->start;
 
-	r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
-	if (r == NULL) {
-		dev_err(&pdev->dev, "no resource defined for command DMA\n");
-		ret = -ENXIO;
-		goto fail_put_clk;
+	ret = pxa3xx_nand_config_flash(info, f);
+	if (ret) {
+		dev_err(&info->pdev->dev, "ERROR! Configure failed\n");
+		return ret;
 	}
-	info->drcmr_cmd = r->start;
 
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "no IRQ resource defined\n");
-		ret = -ENXIO;
-		goto fail_put_clk;
+	pxa3xx_flash_ids[0].name = f->name;
+	pxa3xx_flash_ids[0].dev_id = (f->chip_id >> 8) & 0xffff;
+	pxa3xx_flash_ids[0].pagesize = f->page_size;
+	chipsize = (uint64_t)f->num_blocks * f->page_per_block * f->page_size;
+	pxa3xx_flash_ids[0].chipsize = chipsize >> 20;
+	pxa3xx_flash_ids[0].erasesize = f->page_size * f->page_per_block;
+	if (f->flash_width == 16)
+		pxa3xx_flash_ids[0].options = NAND_BUSWIDTH_16;
+	pxa3xx_flash_ids[1].name = NULL;
+	def = pxa3xx_flash_ids;
+KEEP_CONFIG:
+	if (info->reg_ndcr & NDCR_DWIDTH_M)
+		chip->options |= NAND_BUSWIDTH_16;
+
+	/* Device detection must be done with ECC disabled */
+	if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370)
+		nand_writel(info, NDECCCTRL, 0x0);
+
+	if (nand_scan_ident(mtd, 1, def))
+		return -ENODEV;
+
+	if (pdata->flash_bbt) {
+		/*
+		 * We'll use a bad block table stored in-flash and don't
+		 * allow writing the bad block marker to the flash.
+		 */
+		chip->bbt_options |= NAND_BBT_USE_FLASH |
+				     NAND_BBT_NO_OOB_BBM;
+		chip->bbt_td = &bbt_main_descr;
+		chip->bbt_md = &bbt_mirror_descr;
 	}
 
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (r == NULL) {
-		dev_err(&pdev->dev, "no IO memory resource defined\n");
-		ret = -ENODEV;
-		goto fail_put_clk;
+	/*
+	 * If the page size is bigger than the FIFO size, let's check
+	 * we are given the right variant and then switch to the extended
+	 * (aka splitted) command handling,
+	 */
+	if (mtd->writesize > PAGE_CHUNK_SIZE) {
+		if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370) {
+			chip->cmdfunc = nand_cmdfunc_extended;
+		} else {
+			dev_err(&info->pdev->dev,
+				"unsupported page size on this variant\n");
+			return -ENODEV;
+		}
 	}
 
-	r = request_mem_region(r->start, resource_size(r), pdev->name);
-	if (r == NULL) {
-		dev_err(&pdev->dev, "failed to request memory resource\n");
-		ret = -EBUSY;
-		goto fail_put_clk;
+	if (pdata->ecc_strength && pdata->ecc_step_size) {
+		ecc_strength = pdata->ecc_strength;
+		ecc_step = pdata->ecc_step_size;
+	} else {
+		ecc_strength = chip->ecc_strength_ds;
+		ecc_step = chip->ecc_step_ds;
 	}
 
-	info->mmio_base = ioremap(r->start, resource_size(r));
-	if (info->mmio_base == NULL) {
-		dev_err(&pdev->dev, "ioremap() failed\n");
-		ret = -ENODEV;
-		goto fail_free_res;
+	/* Set default ECC strength requirements on non-ONFI devices */
+	if (ecc_strength < 1 && ecc_step < 1) {
+		ecc_strength = 1;
+		ecc_step = 512;
 	}
-	info->mmio_phys = r->start;
 
+	ret = pxa_ecc_init(info, &chip->ecc, ecc_strength,
+			   ecc_step, mtd->writesize);
+	if (ret)
+		return ret;
+
+	/* calculate addressing information */
+	if (mtd->writesize >= 2048)
+		host->col_addr_cycles = 2;
+	else
+		host->col_addr_cycles = 1;
+
+	/* release the initial buffer */
+	kfree(info->data_buff);
+
+	/* allocate the real data + oob buffer */
+	info->buf_size = mtd->writesize + mtd->oobsize;
 	ret = pxa3xx_nand_init_buff(info);
 	if (ret)
-		goto fail_free_io;
+		return ret;
+	info->oob_buff = info->data_buff + mtd->writesize;
 
-	/* initialize all interrupts to be disabled */
-	disable_int(info, NDSR_MASK);
+	if ((mtd->size >> chip->page_shift) > 65536)
+		host->row_addr_cycles = 3;
+	else
+		host->row_addr_cycles = 2;
+	return nand_scan_tail(mtd);
+}
 
-	ret = request_irq(irq, pxa3xx_nand_irq, IRQF_DISABLED,
-			  pdev->name, info);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to request IRQ\n");
-		goto fail_free_buf;
-	}
+static int alloc_nand_resource(struct platform_device *pdev)
+{
+	struct pxa3xx_nand_platform_data *pdata;
+	struct pxa3xx_nand_info *info;
+	struct pxa3xx_nand_host *host;
+	struct nand_chip *chip = NULL;
+	struct mtd_info *mtd;
+	struct resource *r;
+	int ret, irq, cs;
 
-	ret = pxa3xx_nand_detect_flash(info, pdata);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to detect flash\n");
-		ret = -ENODEV;
-		goto fail_free_irq;
+	pdata = dev_get_platdata(&pdev->dev);
+	info = devm_kzalloc(&pdev->dev, sizeof(*info) + (sizeof(*mtd) +
+			    sizeof(*host)) * pdata->num_cs, GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->pdev = pdev;
+	info->variant = pxa3xx_nand_get_variant(pdev);
+	for (cs = 0; cs < pdata->num_cs; cs++) {
+		mtd = (struct mtd_info *)((unsigned int)&info[1] +
+		      (sizeof(*mtd) + sizeof(*host)) * cs);
+		chip = (struct nand_chip *)(&mtd[1]);
+		host = (struct pxa3xx_nand_host *)chip;
+		info->host[cs] = host;
+		host->mtd = mtd;
+		host->cs = cs;
+		host->info_data = info;
+		mtd->priv = host;
+		mtd->owner = THIS_MODULE;
+
+		chip->ecc.read_page	= pxa3xx_nand_read_page_hwecc;
+		chip->ecc.write_page	= pxa3xx_nand_write_page_hwecc;
+		chip->controller        = &info->controller;
+		chip->waitfunc		= pxa3xx_nand_waitfunc;
+		chip->select_chip	= pxa3xx_nand_select_chip;
+		chip->read_word		= pxa3xx_nand_read_word;
+		chip->read_byte		= pxa3xx_nand_read_byte;
+		chip->read_buf		= pxa3xx_nand_read_buf;
+		chip->write_buf		= pxa3xx_nand_write_buf;
+		chip->options		|= NAND_NO_SUBPAGE_WRITE;
+		chip->cmdfunc		= nand_cmdfunc;
 	}
 
-	pxa3xx_nand_init_mtd(mtd, info);
+	spin_lock_init(&chip->controller->lock);
+	init_waitqueue_head(&chip->controller->wq);
+	info->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(info->clk)) {
+		dev_err(&pdev->dev, "failed to get nand clock\n");
+		return PTR_ERR(info->clk);
+	}
+	ret = clk_prepare_enable(info->clk);
+	if (ret < 0)
+		return ret;
 
-	platform_set_drvdata(pdev, mtd);
+	if (use_dma) {
+		/*
+		 * This is a dirty hack to make this driver work from
+		 * devicetree bindings. It can be removed once we have
+		 * a prober DMA controller framework for DT.
+		 */
+		if (pdev->dev.of_node &&
+		    of_machine_is_compatible("marvell,pxa3xx")) {
+			info->drcmr_dat = 97;
+			info->drcmr_cmd = 99;
+		} else {
+			r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+			if (r == NULL) {
+				dev_err(&pdev->dev,
+					"no resource defined for data DMA\n");
+				ret = -ENXIO;
+				goto fail_disable_clk;
+			}
+			info->drcmr_dat = r->start;
+
+			r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+			if (r == NULL) {
+				dev_err(&pdev->dev,
+					"no resource defined for cmd DMA\n");
+				ret = -ENXIO;
+				goto fail_disable_clk;
+			}
+			info->drcmr_cmd = r->start;
+		}
+	}
 
-	if (nand_scan(mtd, 1)) {
-		dev_err(&pdev->dev, "failed to scan nand\n");
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "no IRQ resource defined\n");
 		ret = -ENXIO;
-		goto fail_free_irq;
+		goto fail_disable_clk;
 	}
 
-	if (mtd_has_cmdlinepart()) {
-		static const char *probes[] = { "cmdlinepart", NULL };
-		struct mtd_partition *parts;
-		int nr_parts;
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	info->mmio_base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(info->mmio_base)) {
+		ret = PTR_ERR(info->mmio_base);
+		goto fail_disable_clk;
+	}
+	info->mmio_phys = r->start;
 
-		nr_parts = parse_mtd_partitions(mtd, probes, &parts, 0);
+	/* Allocate a buffer to allow flash detection */
+	info->buf_size = INIT_BUFFER_SIZE;
+	info->data_buff = kmalloc(info->buf_size, GFP_KERNEL);
+	if (info->data_buff == NULL) {
+		ret = -ENOMEM;
+		goto fail_disable_clk;
+	}
+
+	/* initialize all interrupts to be disabled */
+	disable_int(info, NDSR_MASK);
 
-		if (nr_parts)
-			return add_mtd_partitions(mtd, parts, nr_parts);
+	ret = request_irq(irq, pxa3xx_nand_irq, 0, pdev->name, info);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to request IRQ\n");
+		goto fail_free_buf;
 	}
 
-	return add_mtd_partitions(mtd, pdata->parts, pdata->nr_parts);
+	platform_set_drvdata(pdev, info);
+
+	return 0;
 
-fail_free_irq:
-	free_irq(irq, info);
 fail_free_buf:
-	if (use_dma) {
-		pxa_free_dma(info->data_dma_ch);
-		dma_free_coherent(&pdev->dev, info->data_buff_size,
-			info->data_buff, info->data_buff_phys);
-	} else
-		kfree(info->data_buff);
-fail_free_io:
-	iounmap(info->mmio_base);
-fail_free_res:
-	release_mem_region(r->start, resource_size(r));
-fail_put_clk:
-	clk_disable(info->clk);
-	clk_put(info->clk);
-fail_free_mtd:
-	kfree(mtd);
+	free_irq(irq, info);
+	kfree(info->data_buff);
+fail_disable_clk:
+	clk_disable_unprepare(info->clk);
 	return ret;
 }
 
 static int pxa3xx_nand_remove(struct platform_device *pdev)
 {
-	struct mtd_info *mtd = platform_get_drvdata(pdev);
-	struct pxa3xx_nand_info *info = mtd->priv;
-	struct resource *r;
-	int irq;
+	struct pxa3xx_nand_info *info = platform_get_drvdata(pdev);
+	struct pxa3xx_nand_platform_data *pdata;
+	int irq, cs;
+
+	if (!info)
+		return 0;
 
-	platform_set_drvdata(pdev, NULL);
+	pdata = dev_get_platdata(&pdev->dev);
 
-	del_mtd_device(mtd);
-	del_mtd_partitions(mtd);
 	irq = platform_get_irq(pdev, 0);
 	if (irq >= 0)
 		free_irq(irq, info);
+	pxa3xx_nand_free_buff(info);
+
+	clk_disable_unprepare(info->clk);
+
+	for (cs = 0; cs < pdata->num_cs; cs++)
+		nand_release(info->host[cs]->mtd);
+	return 0;
+}
+
+static int pxa3xx_nand_probe_dt(struct platform_device *pdev)
+{
+	struct pxa3xx_nand_platform_data *pdata;
+	struct device_node *np = pdev->dev.of_node;
+	const struct of_device_id *of_id =
+			of_match_device(pxa3xx_nand_dt_ids, &pdev->dev);
+
+	if (!of_id)
+		return 0;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	if (of_get_property(np, "marvell,nand-enable-arbiter", NULL))
+		pdata->enable_arbiter = 1;
+	if (of_get_property(np, "marvell,nand-keep-config", NULL))
+		pdata->keep_config = 1;
+	of_property_read_u32(np, "num-cs", &pdata->num_cs);
+	pdata->flash_bbt = of_get_nand_on_flash_bbt(np);
+
+	pdata->ecc_strength = of_get_nand_ecc_strength(np);
+	if (pdata->ecc_strength < 0)
+		pdata->ecc_strength = 0;
+
+	pdata->ecc_step_size = of_get_nand_ecc_step_size(np);
+	if (pdata->ecc_step_size < 0)
+		pdata->ecc_step_size = 0;
+
+	pdev->dev.platform_data = pdata;
+
+	return 0;
+}
+
+static int pxa3xx_nand_probe(struct platform_device *pdev)
+{
+	struct pxa3xx_nand_platform_data *pdata;
+	struct mtd_part_parser_data ppdata = {};
+	struct pxa3xx_nand_info *info;
+	int ret, cs, probe_success;
+
+#ifndef ARCH_HAS_DMA
 	if (use_dma) {
-		pxa_free_dma(info->data_dma_ch);
-		dma_free_writecombine(&pdev->dev, info->data_buff_size,
-				info->data_buff, info->data_buff_phys);
-	} else
-		kfree(info->data_buff);
+		use_dma = 0;
+		dev_warn(&pdev->dev,
+			 "This platform can't do DMA on this device\n");
+	}
+#endif
+	ret = pxa3xx_nand_probe_dt(pdev);
+	if (ret)
+		return ret;
 
-	iounmap(info->mmio_base);
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(r->start, resource_size(r));
+	pdata = dev_get_platdata(&pdev->dev);
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data defined\n");
+		return -ENODEV;
+	}
 
-	clk_disable(info->clk);
-	clk_put(info->clk);
+	ret = alloc_nand_resource(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "alloc nand resource failed\n");
+		return ret;
+	}
+
+	info = platform_get_drvdata(pdev);
+	probe_success = 0;
+	for (cs = 0; cs < pdata->num_cs; cs++) {
+		struct mtd_info *mtd = info->host[cs]->mtd;
+
+		/*
+		 * The mtd name matches the one used in 'mtdparts' kernel
+		 * parameter. This name cannot be changed or otherwise
+		 * user's mtd partitions configuration would get broken.
+		 */
+		mtd->name = "pxa3xx_nand-0";
+		info->cs = cs;
+		ret = pxa3xx_nand_scan(mtd);
+		if (ret) {
+			dev_warn(&pdev->dev, "failed to scan nand at cs %d\n",
+				cs);
+			continue;
+		}
+
+		ppdata.of_node = pdev->dev.of_node;
+		ret = mtd_device_parse_register(mtd, NULL,
+						&ppdata, pdata->parts[cs],
+						pdata->nr_parts[cs]);
+		if (!ret)
+			probe_success = 1;
+	}
+
+	if (!probe_success) {
+		pxa3xx_nand_remove(pdev);
+		return -ENODEV;
+	}
 
-	kfree(mtd);
 	return 0;
 }
 
 #ifdef CONFIG_PM
 static int pxa3xx_nand_suspend(struct platform_device *pdev, pm_message_t state)
 {
-	struct mtd_info *mtd = (struct mtd_info *)platform_get_drvdata(pdev);
-	struct pxa3xx_nand_info *info = mtd->priv;
+	struct pxa3xx_nand_info *info = platform_get_drvdata(pdev);
+	struct pxa3xx_nand_platform_data *pdata;
+	struct mtd_info *mtd;
+	int cs;
 
-	if (info->state != STATE_READY) {
+	pdata = dev_get_platdata(&pdev->dev);
+	if (info->state) {
 		dev_err(&pdev->dev, "driver busy, state = %d\n", info->state);
 		return -EAGAIN;
 	}
 
+	for (cs = 0; cs < pdata->num_cs; cs++) {
+		mtd = info->host[cs]->mtd;
+		mtd_suspend(mtd);
+	}
+
 	return 0;
 }
 
 static int pxa3xx_nand_resume(struct platform_device *pdev)
 {
-	struct mtd_info *mtd = (struct mtd_info *)platform_get_drvdata(pdev);
-	struct pxa3xx_nand_info *info = mtd->priv;
+	struct pxa3xx_nand_info *info = platform_get_drvdata(pdev);
+	struct pxa3xx_nand_platform_data *pdata;
+	struct mtd_info *mtd;
+	int cs;
 
-	clk_enable(info->clk);
+	pdata = dev_get_platdata(&pdev->dev);
+	/* We don't want to handle interrupt without calling mtd routine */
+	disable_int(info, NDCR_INT_MASK);
 
-	return pxa3xx_nand_config_flash(info, info->flash_info);
+	/*
+	 * Directly set the chip select to a invalid value,
+	 * then the driver would reset the timing according
+	 * to current chip select at the beginning of cmdfunc
+	 */
+	info->cs = 0xff;
+
+	/*
+	 * As the spec says, the NDSR would be updated to 0x1800 when
+	 * doing the nand_clk disable/enable.
+	 * To prevent it damaging state machine of the driver, clear
+	 * all status before resume
+	 */
+	nand_writel(info, NDSR, NDSR_MASK);
+	for (cs = 0; cs < pdata->num_cs; cs++) {
+		mtd = info->host[cs]->mtd;
+		mtd_resume(mtd);
+	}
+
+	return 0;
 }
 #else
 #define pxa3xx_nand_suspend	NULL
@@ -1417,6 +1874,7 @@ static int pxa3xx_nand_resume(struct platform_device *pdev)
 static struct platform_driver pxa3xx_nand_driver = {
 	.driver = {
 		.name	= "pxa3xx-nand",
+		.of_match_table = pxa3xx_nand_dt_ids,
 	},
 	.probe		= pxa3xx_nand_probe,
 	.remove		= pxa3xx_nand_remove,
@@ -1424,17 +1882,7 @@ static struct platform_driver pxa3xx_nand_driver = {
 	.resume		= pxa3xx_nand_resume,
 };
 
-static int __init pxa3xx_nand_init(void)
-{
-	return platform_driver_register(&pxa3xx_nand_driver);
-}
-module_init(pxa3xx_nand_init);
-
-static void __exit pxa3xx_nand_exit(void)
-{
-	platform_driver_unregister(&pxa3xx_nand_driver);
-}
-module_exit(pxa3xx_nand_exit);
+module_platform_driver(pxa3xx_nand_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("PXA3xx NAND controller driver");
diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c
index bcfc851fe55..baea83f4dea 100644
--- a/drivers/mtd/nand/r852.c
+++ b/drivers/mtd/nand/r852.c
@@ -22,7 +22,7 @@
 #include "r852.h"
 
 
-static int r852_enable_dma = 1;
+static bool r852_enable_dma = 1;
 module_param(r852_enable_dma, bool, S_IRUGO);
 MODULE_PARM_DESC(r852_enable_dma, "Enable usage of the DMA (default)");
 
@@ -64,8 +64,8 @@ static inline void r852_write_reg_dword(struct r852_device *dev,
 /* returns pointer to our private structure */
 static inline struct r852_device *r852_get_dev(struct mtd_info *mtd)
 {
-	struct nand_chip *chip = (struct nand_chip *)mtd->priv;
-	return (struct r852_device *)chip->priv;
+	struct nand_chip *chip = mtd->priv;
+	return chip->priv;
 }
 
 
@@ -181,11 +181,11 @@ static void r852_do_dma(struct r852_device *dev, uint8_t *buf, int do_read)
 	/* Set dma direction */
 	dev->dma_dir = do_read;
 	dev->dma_stage = 1;
-	INIT_COMPLETION(dev->dma_done);
+	reinit_completion(&dev->dma_done);
 
 	dbg_verbose("doing dma %s ", do_read ? "read" : "write");
 
-	/* Set intial dma state: for reading first fill on board buffer,
+	/* Set initial dma state: for reading first fill on board buffer,
 	  from device, for writes first fill the buffer  from memory*/
 	dev->dma_state = do_read ? DMA_INTERNAL : DMA_MEMORY;
 
@@ -229,7 +229,7 @@ static void r852_do_dma(struct r852_device *dev, uint8_t *buf, int do_read)
 /*
  * Program data lines of the nand chip to send data to it
  */
-void r852_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+static void r852_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
 {
 	struct r852_device *dev = r852_get_dev(mtd);
 	uint32_t reg;
@@ -245,7 +245,7 @@ void r852_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
 	}
 
 	/* write DWORD chinks - faster */
-	while (len) {
+	while (len >= 4) {
 		reg = buf[0] | buf[1] << 8 | buf[2] << 16 | buf[3] << 24;
 		r852_write_reg_dword(dev, R852_DATALINE, reg);
 		buf += 4;
@@ -254,14 +254,16 @@ void r852_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
 	}
 
 	/* write rest */
-	while (len)
+	while (len > 0) {
 		r852_write_reg(dev, R852_DATALINE, *buf++);
+		len--;
+	}
 }
 
 /*
  * Read data lines of the nand chip to retrieve data
  */
-void r852_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+static void r852_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
 {
 	struct r852_device *dev = r852_get_dev(mtd);
 	uint32_t reg;
@@ -309,31 +311,10 @@ static uint8_t r852_read_byte(struct mtd_info *mtd)
 	return r852_read_reg(dev, R852_DATALINE);
 }
 
-
-/*
- * Readback the buffer to verify it
- */
-int r852_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
-{
-	struct r852_device *dev = r852_get_dev(mtd);
-
-	/* We can't be sure about anything here... */
-	if (dev->card_unstable)
-		return -1;
-
-	/* This will never happen, unless you wired up a nand chip
-		with > 512 bytes page size to the reader */
-	if (len > SM_SECTOR_SIZE)
-		return 0;
-
-	r852_read_buf(mtd, dev->tmp_buffer, len);
-	return memcmp(buf, dev->tmp_buffer, len);
-}
-
 /*
  * Control several chip lines & send commands
  */
-void r852_cmdctl(struct mtd_info *mtd, int dat, unsigned int ctrl)
+static void r852_cmdctl(struct mtd_info *mtd, int dat, unsigned int ctrl)
 {
 	struct r852_device *dev = r852_get_dev(mtd);
 
@@ -378,9 +359,9 @@ void r852_cmdctl(struct mtd_info *mtd, int dat, unsigned int ctrl)
  * Wait till card is ready.
  * based on nand_wait, but returns errors on DMA error
  */
-int r852_wait(struct mtd_info *mtd, struct nand_chip *chip)
+static int r852_wait(struct mtd_info *mtd, struct nand_chip *chip)
 {
-	struct r852_device *dev = (struct r852_device *)chip->priv;
+	struct r852_device *dev = chip->priv;
 
 	unsigned long timeout;
 	int status;
@@ -407,7 +388,7 @@ int r852_wait(struct mtd_info *mtd, struct nand_chip *chip)
  * Check if card is ready
  */
 
-int r852_ready(struct mtd_info *mtd)
+static int r852_ready(struct mtd_info *mtd)
 {
 	struct r852_device *dev = r852_get_dev(mtd);
 	return !(r852_read_reg(dev, R852_CARD_STA) & R852_CARD_STA_BUSY);
@@ -418,7 +399,7 @@ int r852_ready(struct mtd_info *mtd)
  * Set ECC engine mode
 */
 
-void r852_ecc_hwctl(struct mtd_info *mtd, int mode)
+static void r852_ecc_hwctl(struct mtd_info *mtd, int mode)
 {
 	struct r852_device *dev = r852_get_dev(mtd);
 
@@ -450,7 +431,7 @@ void r852_ecc_hwctl(struct mtd_info *mtd, int mode)
  * Calculate ECC, only used for writes
  */
 
-int r852_ecc_calculate(struct mtd_info *mtd, const uint8_t *dat,
+static int r852_ecc_calculate(struct mtd_info *mtd, const uint8_t *dat,
 							uint8_t *ecc_code)
 {
 	struct r852_device *dev = r852_get_dev(mtd);
@@ -482,7 +463,7 @@ int r852_ecc_calculate(struct mtd_info *mtd, const uint8_t *dat,
  * Correct the data using ECC, hw did almost everything for us
  */
 
-int r852_ecc_correct(struct mtd_info *mtd, uint8_t *dat,
+static int r852_ecc_correct(struct mtd_info *mtd, uint8_t *dat,
 				uint8_t *read_ecc, uint8_t *calc_ecc)
 {
 	uint16_t ecc_reg;
@@ -539,21 +520,18 @@ exit:
  * nand_read_oob_syndrome assumes we can send column address - we can't
  */
 static int r852_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
-			     int page, int sndcmd)
+			     int page)
 {
-	if (sndcmd) {
-		chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
-		sndcmd = 0;
-	}
+	chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
 	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-	return sndcmd;
+	return 0;
 }
 
 /*
  * Start the nand engine
  */
 
-void r852_engine_enable(struct r852_device *dev)
+static void r852_engine_enable(struct r852_device *dev)
 {
 	if (r852_read_reg_dword(dev, R852_HW) & R852_HW_UNKNOWN) {
 		r852_write_reg(dev, R852_CTL, R852_CTL_RESET | R852_CTL_ON);
@@ -571,7 +549,7 @@ void r852_engine_enable(struct r852_device *dev)
  * Stop the nand engine
  */
 
-void r852_engine_disable(struct r852_device *dev)
+static void r852_engine_disable(struct r852_device *dev)
 {
 	r852_write_reg_dword(dev, R852_HW, 0);
 	r852_write_reg(dev, R852_CTL, R852_CTL_RESET);
@@ -581,7 +559,7 @@ void r852_engine_disable(struct r852_device *dev)
  * Test if card is present
  */
 
-void r852_card_update_present(struct r852_device *dev)
+static void r852_card_update_present(struct r852_device *dev)
 {
 	unsigned long flags;
 	uint8_t reg;
@@ -596,7 +574,7 @@ void r852_card_update_present(struct r852_device *dev)
  * Update card detection IRQ state according to current card state
  * which is read in r852_card_update_present
  */
-void r852_update_card_detect(struct r852_device *dev)
+static void r852_update_card_detect(struct r852_device *dev)
 {
 	int card_detect_reg = r852_read_reg(dev, R852_CARD_IRQ_ENABLE);
 	dev->card_unstable = 0;
@@ -610,8 +588,8 @@ void r852_update_card_detect(struct r852_device *dev)
 	r852_write_reg(dev, R852_CARD_IRQ_ENABLE, card_detect_reg);
 }
 
-ssize_t r852_media_type_show(struct device *sys_dev,
-		struct device_attribute *attr, char *buf)
+static ssize_t r852_media_type_show(struct device *sys_dev,
+			struct device_attribute *attr, char *buf)
 {
 	struct mtd_info *mtd = container_of(sys_dev, struct mtd_info, dev);
 	struct r852_device *dev = r852_get_dev(mtd);
@@ -621,11 +599,11 @@ ssize_t r852_media_type_show(struct device *sys_dev,
 	return strlen(data);
 }
 
-DEVICE_ATTR(media_type, S_IRUGO, r852_media_type_show, NULL);
+static DEVICE_ATTR(media_type, S_IRUGO, r852_media_type_show, NULL);
 
 
 /* Detect properties of card in slot */
-void r852_update_media_status(struct r852_device *dev)
+static void r852_update_media_status(struct r852_device *dev)
 {
 	uint8_t reg;
 	unsigned long flags;
@@ -654,7 +632,7 @@ void r852_update_media_status(struct r852_device *dev)
  * Register the nand device
  * Called when the card is detected
  */
-int r852_register_nand_device(struct r852_device *dev)
+static int r852_register_nand_device(struct r852_device *dev)
 {
 	dev->mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
 
@@ -692,7 +670,7 @@ error1:
  * Unregister the card
  */
 
-void r852_unregister_nand_device(struct r852_device *dev)
+static void r852_unregister_nand_device(struct r852_device *dev)
 {
 	if (!dev->card_registred)
 		return;
@@ -706,7 +684,7 @@ void r852_unregister_nand_device(struct r852_device *dev)
 }
 
 /* Card state updater */
-void r852_card_detect_work(struct work_struct *work)
+static void r852_card_detect_work(struct work_struct *work)
 {
 	struct r852_device *dev =
 		container_of(work, struct r852_device, card_detect_work.work);
@@ -757,11 +735,6 @@ static irqreturn_t r852_irq(int irq, void *data)
 
 	spin_lock_irqsave(&dev->irqlock, flags);
 
-	/* We can recieve shared interrupt while pci is suspended
-		in that case reads will return 0xFFFFFFFF.... */
-	if (dev->insuspend)
-		goto out;
-
 	/* handle card detection interrupts first */
 	card_status = r852_read_reg(dev, R852_CARD_IRQ_STA);
 	r852_write_reg(dev, R852_CARD_IRQ_STA, card_status);
@@ -771,7 +744,7 @@ static irqreturn_t r852_irq(int irq, void *data)
 		ret = IRQ_HANDLED;
 		dev->card_detected = !!(card_status & R852_CARD_IRQ_INSERT);
 
-		/* we shouldn't recieve any interrupts if we wait for card
+		/* we shouldn't receive any interrupts if we wait for card
 			to settle */
 		WARN_ON(dev->card_unstable);
 
@@ -799,13 +772,13 @@ static irqreturn_t r852_irq(int irq, void *data)
 		ret = IRQ_HANDLED;
 
 		if (dma_status & R852_DMA_IRQ_ERROR) {
-			dbg("recieved dma error IRQ");
+			dbg("received dma error IRQ");
 			r852_dma_done(dev, -EIO);
 			complete(&dev->dma_done);
 			goto out;
 		}
 
-		/* recieved DMA interrupt out of nowhere? */
+		/* received DMA interrupt out of nowhere? */
 		WARN_ON_ONCE(dev->dma_stage == 0);
 
 		if (dev->dma_stage == 0)
@@ -850,7 +823,7 @@ out:
 	return ret;
 }
 
-int  r852_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
+static int  r852_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
 {
 	int error;
 	struct nand_chip *chip;
@@ -890,12 +863,12 @@ int  r852_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
 	chip->read_byte = r852_read_byte;
 	chip->read_buf = r852_read_buf;
 	chip->write_buf = r852_write_buf;
-	chip->verify_buf = r852_verify_buf;
 
 	/* ecc */
 	chip->ecc.mode = NAND_ECC_HW_SYNDROME;
 	chip->ecc.size = R852_DMA_LEN;
 	chip->ecc.bytes = SM_OOB_SIZE;
+	chip->ecc.strength = 2;
 	chip->ecc.hwctl = r852_ecc_hwctl;
 	chip->ecc.calculate = r852_ecc_calculate;
 	chip->ecc.correct = r852_ecc_correct;
@@ -935,7 +908,7 @@ int  r852_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
 
 	init_completion(&dev->dma_done);
 
-	dev->card_workqueue = create_freezeable_workqueue(DRV_NAME);
+	dev->card_workqueue = create_freezable_workqueue(DRV_NAME);
 
 	if (!dev->card_workqueue)
 		goto error9;
@@ -965,7 +938,7 @@ int  r852_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
 		&dev->card_detect_work, 0);
 
 
-	printk(KERN_NOTICE DRV_NAME ": driver loaded succesfully\n");
+	printk(KERN_NOTICE DRV_NAME ": driver loaded successfully\n");
 	return 0;
 
 error10:
@@ -990,7 +963,7 @@ error1:
 	return error;
 }
 
-void r852_remove(struct pci_dev *pci_dev)
+static void r852_remove(struct pci_dev *pci_dev)
 {
 	struct r852_device *dev = pci_get_drvdata(pci_dev);
 
@@ -1021,7 +994,7 @@ void r852_remove(struct pci_dev *pci_dev)
 	pci_disable_device(pci_dev);
 }
 
-void r852_shutdown(struct pci_dev *pci_dev)
+static void r852_shutdown(struct pci_dev *pci_dev)
 {
 	struct r852_device *dev = pci_get_drvdata(pci_dev);
 
@@ -1031,11 +1004,10 @@ void r852_shutdown(struct pci_dev *pci_dev)
 	pci_disable_device(pci_dev);
 }
 
-#ifdef CONFIG_PM
-int r852_suspend(struct device *device)
+#ifdef CONFIG_PM_SLEEP
+static int r852_suspend(struct device *device)
 {
 	struct r852_device *dev = pci_get_drvdata(to_pci_dev(device));
-	unsigned long flags;
 
 	if (dev->ctlreg & R852_CTL_CARDENABLE)
 		return -EBUSY;
@@ -1047,43 +1019,22 @@ int r852_suspend(struct device *device)
 	r852_disable_irqs(dev);
 	r852_engine_disable(dev);
 
-	spin_lock_irqsave(&dev->irqlock, flags);
-	dev->insuspend = 1;
-	spin_unlock_irqrestore(&dev->irqlock, flags);
-
-	/* At that point, even if interrupt handler is running, it will quit */
-	/* So wait for this to happen explictly */
-	synchronize_irq(dev->irq);
-
 	/* If card was pulled off just during the suspend, which is very
 		unlikely, we will remove it on resume, it too late now
 		anyway... */
 	dev->card_unstable = 0;
-
-	pci_save_state(to_pci_dev(device));
-	return pci_prepare_to_sleep(to_pci_dev(device));
+	return 0;
 }
 
-int r852_resume(struct device *device)
+static int r852_resume(struct device *device)
 {
 	struct r852_device *dev = pci_get_drvdata(to_pci_dev(device));
-	unsigned long flags;
-
-	/* Turn on the hardware */
-	pci_back_from_sleep(to_pci_dev(device));
-	pci_restore_state(to_pci_dev(device));
 
 	r852_disable_irqs(dev);
 	r852_card_update_present(dev);
 	r852_engine_disable(dev);
 
 
-	/* Now its safe for IRQ to run */
-	spin_lock_irqsave(&dev->irqlock, flags);
-	dev->insuspend = 0;
-	spin_unlock_irqrestore(&dev->irqlock, flags);
-
-
 	/* If card status changed, just do the work */
 	if (dev->card_detected != dev->card_registred) {
 		dbg("card was %s during low power state",
@@ -1106,9 +1057,6 @@ int r852_resume(struct device *device)
 	r852_update_card_detect(dev);
 	return 0;
 }
-#else
-#define r852_suspend	NULL
-#define r852_resume	NULL
 #endif
 
 static const struct pci_device_id r852_pci_id_tbl[] = {
@@ -1119,8 +1067,7 @@ static const struct pci_device_id r852_pci_id_tbl[] = {
 
 MODULE_DEVICE_TABLE(pci, r852_pci_id_tbl);
 
-SIMPLE_DEV_PM_OPS(r852_pm_ops, r852_suspend, r852_resume);
-
+static SIMPLE_DEV_PM_OPS(r852_pm_ops, r852_suspend, r852_resume);
 
 static struct pci_driver r852_pci_driver = {
 	.name		= DRV_NAME,
@@ -1131,18 +1078,7 @@ static struct pci_driver r852_pci_driver = {
 	.driver.pm	= &r852_pm_ops,
 };
 
-static __init int r852_module_init(void)
-{
-	return pci_register_driver(&r852_pci_driver);
-}
-
-static void __exit r852_module_exit(void)
-{
-	pci_unregister_driver(&r852_pci_driver);
-}
-
-module_init(r852_module_init);
-module_exit(r852_module_exit);
+module_pci_driver(r852_pci_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Maxim Levitsky <maximlevitsky@gmail.com>");
diff --git a/drivers/mtd/nand/r852.h b/drivers/mtd/nand/r852.h
index 8096cc280c7..e6a21d9d22c 100644
--- a/drivers/mtd/nand/r852.h
+++ b/drivers/mtd/nand/r852.h
@@ -140,8 +140,6 @@ struct r852_device {
 	/* interrupt handling */
 	spinlock_t irqlock;		/* IRQ protecting lock */
 	int irq;			/* irq num */
-	int insuspend;			/* device is suspended */
-
 	/* misc */
 	void *tmp_buffer;		/* temporary buffer */
 	uint8_t ctlreg;			/* cached contents of control reg */
diff --git a/drivers/mtd/nand/rtc_from4.c b/drivers/mtd/nand/rtc_from4.c
deleted file mode 100644
index a033c4cd8e1..00000000000
--- a/drivers/mtd/nand/rtc_from4.c
+++ /dev/null
@@ -1,624 +0,0 @@
-/*
- *  drivers/mtd/nand/rtc_from4.c
- *
- *  Copyright (C) 2004  Red Hat, Inc.
- *
- *  Derived from drivers/mtd/nand/spia.c
- *       Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Overview:
- *   This is a device driver for the AG-AND flash device found on the
- *   Renesas Technology Corp. Flash ROM 4-slot interface board (FROM_BOARD4),
- *   which utilizes the Renesas HN29V1G91T-30 part.
- *   This chip is a 1 GBibit (128MiB x 8 bits) AG-AND flash device.
- */
-
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/rslib.h>
-#include <linux/bitrev.h>
-#include <linux/module.h>
-#include <linux/mtd/compatmac.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <asm/io.h>
-
-/*
- * MTD structure for Renesas board
- */
-static struct mtd_info *rtc_from4_mtd = NULL;
-
-#define RTC_FROM4_MAX_CHIPS	2
-
-/* HS77x9 processor register defines */
-#define SH77X9_BCR1	((volatile unsigned short *)(0xFFFFFF60))
-#define SH77X9_BCR2	((volatile unsigned short *)(0xFFFFFF62))
-#define SH77X9_WCR1	((volatile unsigned short *)(0xFFFFFF64))
-#define SH77X9_WCR2	((volatile unsigned short *)(0xFFFFFF66))
-#define SH77X9_MCR	((volatile unsigned short *)(0xFFFFFF68))
-#define SH77X9_PCR	((volatile unsigned short *)(0xFFFFFF6C))
-#define SH77X9_FRQCR	((volatile unsigned short *)(0xFFFFFF80))
-
-/*
- * Values specific to the Renesas Technology Corp. FROM_BOARD4 (used with HS77x9 processor)
- */
-/* Address where flash is mapped */
-#define RTC_FROM4_FIO_BASE	0x14000000
-
-/* CLE and ALE are tied to address lines 5 & 4, respectively */
-#define RTC_FROM4_CLE		(1 << 5)
-#define RTC_FROM4_ALE		(1 << 4)
-
-/* address lines A24-A22 used for chip selection */
-#define RTC_FROM4_NAND_ADDR_SLOT3	(0x00800000)
-#define RTC_FROM4_NAND_ADDR_SLOT4	(0x00C00000)
-#define RTC_FROM4_NAND_ADDR_FPGA	(0x01000000)
-/* mask address lines A24-A22 used for chip selection */
-#define RTC_FROM4_NAND_ADDR_MASK	(RTC_FROM4_NAND_ADDR_SLOT3 | RTC_FROM4_NAND_ADDR_SLOT4 | RTC_FROM4_NAND_ADDR_FPGA)
-
-/* FPGA status register for checking device ready (bit zero) */
-#define RTC_FROM4_FPGA_SR		(RTC_FROM4_NAND_ADDR_FPGA | 0x00000002)
-#define RTC_FROM4_DEVICE_READY		0x0001
-
-/* FPGA Reed-Solomon ECC Control register */
-
-#define RTC_FROM4_RS_ECC_CTL		(RTC_FROM4_NAND_ADDR_FPGA | 0x00000050)
-#define RTC_FROM4_RS_ECC_CTL_CLR	(1 << 7)
-#define RTC_FROM4_RS_ECC_CTL_GEN	(1 << 6)
-#define RTC_FROM4_RS_ECC_CTL_FD_E	(1 << 5)
-
-/* FPGA Reed-Solomon ECC code base */
-#define RTC_FROM4_RS_ECC		(RTC_FROM4_NAND_ADDR_FPGA | 0x00000060)
-#define RTC_FROM4_RS_ECCN		(RTC_FROM4_NAND_ADDR_FPGA | 0x00000080)
-
-/* FPGA Reed-Solomon ECC check register */
-#define RTC_FROM4_RS_ECC_CHK		(RTC_FROM4_NAND_ADDR_FPGA | 0x00000070)
-#define RTC_FROM4_RS_ECC_CHK_ERROR	(1 << 7)
-
-#define ERR_STAT_ECC_AVAILABLE		0x20
-
-/* Undefine for software ECC */
-#define RTC_FROM4_HWECC	1
-
-/* Define as 1 for no virtual erase blocks (in JFFS2) */
-#define RTC_FROM4_NO_VIRTBLOCKS	0
-
-/*
- * Module stuff
- */
-static void __iomem *rtc_from4_fio_base = (void *)P2SEGADDR(RTC_FROM4_FIO_BASE);
-
-static const struct mtd_partition partition_info[] = {
-	{
-	 .name = "Renesas flash partition 1",
-	 .offset = 0,
-	 .size = MTDPART_SIZ_FULL},
-};
-
-#define NUM_PARTITIONS 1
-
-/*
- *	hardware specific flash bbt decriptors
- *	Note: this is to allow debugging by disabling
- *		NAND_BBT_CREATE and/or NAND_BBT_WRITE
- *
- */
-static uint8_t bbt_pattern[] = { 'B', 'b', 't', '0' };
-static uint8_t mirror_pattern[] = { '1', 't', 'b', 'B' };
-
-static struct nand_bbt_descr rtc_from4_bbt_main_descr = {
-	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
-		| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
-	.offs = 40,
-	.len = 4,
-	.veroffs = 44,
-	.maxblocks = 4,
-	.pattern = bbt_pattern
-};
-
-static struct nand_bbt_descr rtc_from4_bbt_mirror_descr = {
-	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
-		| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
-	.offs = 40,
-	.len = 4,
-	.veroffs = 44,
-	.maxblocks = 4,
-	.pattern = mirror_pattern
-};
-
-#ifdef RTC_FROM4_HWECC
-
-/* the Reed Solomon control structure */
-static struct rs_control *rs_decoder;
-
-/*
- *      hardware specific Out Of Band information
- */
-static struct nand_ecclayout rtc_from4_nand_oobinfo = {
-	.eccbytes = 32,
-	.eccpos = {
-		   0, 1, 2, 3, 4, 5, 6, 7,
-		   8, 9, 10, 11, 12, 13, 14, 15,
-		   16, 17, 18, 19, 20, 21, 22, 23,
-		   24, 25, 26, 27, 28, 29, 30, 31},
-	.oobfree = {{32, 32}}
-};
-
-#endif
-
-/*
- * rtc_from4_hwcontrol - hardware specific access to control-lines
- * @mtd:	MTD device structure
- * @cmd:	hardware control command
- *
- * Address lines (A5 and A4) are used to control Command and Address Latch
- * Enable on this board, so set the read/write address appropriately.
- *
- * Chip Enable is also controlled by the Chip Select (CS5) and
- * Address lines (A24-A22), so no action is required here.
- *
- */
-static void rtc_from4_hwcontrol(struct mtd_info *mtd, int cmd,
-				unsigned int ctrl)
-{
-	struct nand_chip *chip = (mtd->priv);
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	if (ctrl & NAND_CLE)
-		writeb(cmd, chip->IO_ADDR_W | RTC_FROM4_CLE);
-	else
-		writeb(cmd, chip->IO_ADDR_W | RTC_FROM4_ALE);
-}
-
-/*
- * rtc_from4_nand_select_chip - hardware specific chip select
- * @mtd:	MTD device structure
- * @chip:	Chip to select (0 == slot 3, 1 == slot 4)
- *
- * The chip select is based on address lines A24-A22.
- * This driver uses flash slots 3 and 4 (A23-A22).
- *
- */
-static void rtc_from4_nand_select_chip(struct mtd_info *mtd, int chip)
-{
-	struct nand_chip *this = mtd->priv;
-
-	this->IO_ADDR_R = (void __iomem *)((unsigned long)this->IO_ADDR_R & ~RTC_FROM4_NAND_ADDR_MASK);
-	this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W & ~RTC_FROM4_NAND_ADDR_MASK);
-
-	switch (chip) {
-
-	case 0:		/* select slot 3 chip */
-		this->IO_ADDR_R = (void __iomem *)((unsigned long)this->IO_ADDR_R | RTC_FROM4_NAND_ADDR_SLOT3);
-		this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W | RTC_FROM4_NAND_ADDR_SLOT3);
-		break;
-	case 1:		/* select slot 4 chip */
-		this->IO_ADDR_R = (void __iomem *)((unsigned long)this->IO_ADDR_R | RTC_FROM4_NAND_ADDR_SLOT4);
-		this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W | RTC_FROM4_NAND_ADDR_SLOT4);
-		break;
-
-	}
-}
-
-/*
- * rtc_from4_nand_device_ready - hardware specific ready/busy check
- * @mtd:	MTD device structure
- *
- * This board provides the Ready/Busy state in the status register
- * of the FPGA.  Bit zero indicates the RDY(1)/BSY(0) signal.
- *
- */
-static int rtc_from4_nand_device_ready(struct mtd_info *mtd)
-{
-	unsigned short status;
-
-	status = *((volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_FPGA_SR));
-
-	return (status & RTC_FROM4_DEVICE_READY);
-
-}
-
-/*
- * deplete - code to perform device recovery in case there was a power loss
- * @mtd:	MTD device structure
- * @chip:	Chip to select (0 == slot 3, 1 == slot 4)
- *
- * If there was a sudden loss of power during an erase operation, a
- * "device recovery" operation must be performed when power is restored
- * to ensure correct operation.  This routine performs the required steps
- * for the requested chip.
- *
- * See page 86 of the data sheet for details.
- *
- */
-static void deplete(struct mtd_info *mtd, int chip)
-{
-	struct nand_chip *this = mtd->priv;
-
-	/* wait until device is ready */
-	while (!this->dev_ready(mtd)) ;
-
-	this->select_chip(mtd, chip);
-
-	/* Send the commands for device recovery, phase 1 */
-	this->cmdfunc(mtd, NAND_CMD_DEPLETE1, 0x0000, 0x0000);
-	this->cmdfunc(mtd, NAND_CMD_DEPLETE2, -1, -1);
-
-	/* Send the commands for device recovery, phase 2 */
-	this->cmdfunc(mtd, NAND_CMD_DEPLETE1, 0x0000, 0x0004);
-	this->cmdfunc(mtd, NAND_CMD_DEPLETE2, -1, -1);
-
-}
-
-#ifdef RTC_FROM4_HWECC
-/*
- * rtc_from4_enable_hwecc - hardware specific hardware ECC enable function
- * @mtd:	MTD device structure
- * @mode:	I/O mode; read or write
- *
- * enable hardware ECC for data read or write
- *
- */
-static void rtc_from4_enable_hwecc(struct mtd_info *mtd, int mode)
-{
-	volatile unsigned short *rs_ecc_ctl = (volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECC_CTL);
-	unsigned short status;
-
-	switch (mode) {
-	case NAND_ECC_READ:
-		status = RTC_FROM4_RS_ECC_CTL_CLR | RTC_FROM4_RS_ECC_CTL_FD_E;
-
-		*rs_ecc_ctl = status;
-		break;
-
-	case NAND_ECC_READSYN:
-		status = 0x00;
-
-		*rs_ecc_ctl = status;
-		break;
-
-	case NAND_ECC_WRITE:
-		status = RTC_FROM4_RS_ECC_CTL_CLR | RTC_FROM4_RS_ECC_CTL_GEN | RTC_FROM4_RS_ECC_CTL_FD_E;
-
-		*rs_ecc_ctl = status;
-		break;
-
-	default:
-		BUG();
-		break;
-	}
-
-}
-
-/*
- * rtc_from4_calculate_ecc - hardware specific code to read ECC code
- * @mtd:	MTD device structure
- * @dat:	buffer containing the data to generate ECC codes
- * @ecc_code	ECC codes calculated
- *
- * The ECC code is calculated by the FPGA.  All we have to do is read the values
- * from the FPGA registers.
- *
- * Note: We read from the inverted registers, since data is inverted before
- * the code is calculated. So all 0xff data (blank page) results in all 0xff rs code
- *
- */
-static void rtc_from4_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
-{
-	volatile unsigned short *rs_eccn = (volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECCN);
-	unsigned short value;
-	int i;
-
-	for (i = 0; i < 8; i++) {
-		value = *rs_eccn;
-		ecc_code[i] = (unsigned char)value;
-		rs_eccn++;
-	}
-	ecc_code[7] |= 0x0f;	/* set the last four bits (not used) */
-}
-
-/*
- * rtc_from4_correct_data - hardware specific code to correct data using ECC code
- * @mtd:	MTD device structure
- * @buf:	buffer containing the data to generate ECC codes
- * @ecc1	ECC codes read
- * @ecc2	ECC codes calculated
- *
- * The FPGA tells us fast, if there's an error or not. If no, we go back happy
- * else we read the ecc results from the fpga and call the rs library to decode
- * and hopefully correct the error.
- *
- */
-static int rtc_from4_correct_data(struct mtd_info *mtd, const u_char *buf, u_char *ecc1, u_char *ecc2)
-{
-	int i, j, res;
-	unsigned short status;
-	uint16_t par[6], syn[6];
-	uint8_t ecc[8];
-	volatile unsigned short *rs_ecc;
-
-	status = *((volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECC_CHK));
-
-	if (!(status & RTC_FROM4_RS_ECC_CHK_ERROR)) {
-		return 0;
-	}
-
-	/* Read the syndrom pattern from the FPGA and correct the bitorder */
-	rs_ecc = (volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECC);
-	for (i = 0; i < 8; i++) {
-		ecc[i] = bitrev8(*rs_ecc);
-		rs_ecc++;
-	}
-
-	/* convert into 6 10bit syndrome fields */
-	par[5] = rs_decoder->index_of[(((uint16_t) ecc[0] >> 0) & 0x0ff) | (((uint16_t) ecc[1] << 8) & 0x300)];
-	par[4] = rs_decoder->index_of[(((uint16_t) ecc[1] >> 2) & 0x03f) | (((uint16_t) ecc[2] << 6) & 0x3c0)];
-	par[3] = rs_decoder->index_of[(((uint16_t) ecc[2] >> 4) & 0x00f) | (((uint16_t) ecc[3] << 4) & 0x3f0)];
-	par[2] = rs_decoder->index_of[(((uint16_t) ecc[3] >> 6) & 0x003) | (((uint16_t) ecc[4] << 2) & 0x3fc)];
-	par[1] = rs_decoder->index_of[(((uint16_t) ecc[5] >> 0) & 0x0ff) | (((uint16_t) ecc[6] << 8) & 0x300)];
-	par[0] = (((uint16_t) ecc[6] >> 2) & 0x03f) | (((uint16_t) ecc[7] << 6) & 0x3c0);
-
-	/* Convert to computable syndrome */
-	for (i = 0; i < 6; i++) {
-		syn[i] = par[0];
-		for (j = 1; j < 6; j++)
-			if (par[j] != rs_decoder->nn)
-				syn[i] ^= rs_decoder->alpha_to[rs_modnn(rs_decoder, par[j] + i * j)];
-
-		/* Convert to index form */
-		syn[i] = rs_decoder->index_of[syn[i]];
-	}
-
-	/* Let the library code do its magic. */
-	res = decode_rs8(rs_decoder, (uint8_t *) buf, par, 512, syn, 0, NULL, 0xff, NULL);
-	if (res > 0) {
-		DEBUG(MTD_DEBUG_LEVEL0, "rtc_from4_correct_data: " "ECC corrected %d errors on read\n", res);
-	}
-	return res;
-}
-
-/**
- * rtc_from4_errstat - perform additional error status checks
- * @mtd:	MTD device structure
- * @this:	NAND chip structure
- * @state:	state or the operation
- * @status:	status code returned from read status
- * @page:	startpage inside the chip, must be called with (page & this->pagemask)
- *
- * Perform additional error status checks on erase and write failures
- * to determine if errors are correctable.  For this device, correctable
- * 1-bit errors on erase and write are considered acceptable.
- *
- * note: see pages 34..37 of data sheet for details.
- *
- */
-static int rtc_from4_errstat(struct mtd_info *mtd, struct nand_chip *this,
-			     int state, int status, int page)
-{
-	int er_stat = 0;
-	int rtn, retlen;
-	size_t len;
-	uint8_t *buf;
-	int i;
-
-	this->cmdfunc(mtd, NAND_CMD_STATUS_CLEAR, -1, -1);
-
-	if (state == FL_ERASING) {
-
-		for (i = 0; i < 4; i++) {
-			if (!(status & 1 << (i + 1)))
-				continue;
-			this->cmdfunc(mtd, (NAND_CMD_STATUS_ERROR + i + 1),
-				      -1, -1);
-			rtn = this->read_byte(mtd);
-			this->cmdfunc(mtd, NAND_CMD_STATUS_RESET, -1, -1);
-
-			/* err_ecc_not_avail */
-			if (!(rtn & ERR_STAT_ECC_AVAILABLE))
-				er_stat |= 1 << (i + 1);
-		}
-
-	} else if (state == FL_WRITING) {
-
-		unsigned long corrected = mtd->ecc_stats.corrected;
-
-		/* single bank write logic */
-		this->cmdfunc(mtd, NAND_CMD_STATUS_ERROR, -1, -1);
-		rtn = this->read_byte(mtd);
-		this->cmdfunc(mtd, NAND_CMD_STATUS_RESET, -1, -1);
-
-		if (!(rtn & ERR_STAT_ECC_AVAILABLE)) {
-			/* err_ecc_not_avail */
-			er_stat |= 1 << 1;
-			goto out;
-		}
-
-		len = mtd->writesize;
-		buf = kmalloc(len, GFP_KERNEL);
-		if (!buf) {
-			printk(KERN_ERR "rtc_from4_errstat: Out of memory!\n");
-			er_stat = 1;
-			goto out;
-		}
-
-		/* recovery read */
-		rtn = nand_do_read(mtd, page, len, &retlen, buf);
-
-		/* if read failed or > 1-bit error corrected */
-		if (rtn || (mtd->ecc_stats.corrected - corrected) > 1)
-			er_stat |= 1 << 1;
-		kfree(buf);
-	}
-out:
-	rtn = status;
-	if (er_stat == 0) {	/* if ECC is available   */
-		rtn = (status & ~NAND_STATUS_FAIL);	/*   clear the error bit */
-	}
-
-	return rtn;
-}
-#endif
-
-/*
- * Main initialization routine
- */
-static int __init rtc_from4_init(void)
-{
-	struct nand_chip *this;
-	unsigned short bcr1, bcr2, wcr2;
-	int i;
-	int ret;
-
-	/* Allocate memory for MTD device structure and private data */
-	rtc_from4_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
-	if (!rtc_from4_mtd) {
-		printk("Unable to allocate Renesas NAND MTD device structure.\n");
-		return -ENOMEM;
-	}
-
-	/* Get pointer to private data */
-	this = (struct nand_chip *)(&rtc_from4_mtd[1]);
-
-	/* Initialize structures */
-	memset(rtc_from4_mtd, 0, sizeof(struct mtd_info));
-	memset(this, 0, sizeof(struct nand_chip));
-
-	/* Link the private data with the MTD structure */
-	rtc_from4_mtd->priv = this;
-	rtc_from4_mtd->owner = THIS_MODULE;
-
-	/* set area 5 as PCMCIA mode to clear the spec of tDH(Data hold time;9ns min) */
-	bcr1 = *SH77X9_BCR1 & ~0x0002;
-	bcr1 |= 0x0002;
-	*SH77X9_BCR1 = bcr1;
-
-	/* set */
-	bcr2 = *SH77X9_BCR2 & ~0x0c00;
-	bcr2 |= 0x0800;
-	*SH77X9_BCR2 = bcr2;
-
-	/* set area 5 wait states */
-	wcr2 = *SH77X9_WCR2 & ~0x1c00;
-	wcr2 |= 0x1c00;
-	*SH77X9_WCR2 = wcr2;
-
-	/* Set address of NAND IO lines */
-	this->IO_ADDR_R = rtc_from4_fio_base;
-	this->IO_ADDR_W = rtc_from4_fio_base;
-	/* Set address of hardware control function */
-	this->cmd_ctrl = rtc_from4_hwcontrol;
-	/* Set address of chip select function */
-	this->select_chip = rtc_from4_nand_select_chip;
-	/* command delay time (in us) */
-	this->chip_delay = 100;
-	/* return the status of the Ready/Busy line */
-	this->dev_ready = rtc_from4_nand_device_ready;
-
-#ifdef RTC_FROM4_HWECC
-	printk(KERN_INFO "rtc_from4_init: using hardware ECC detection.\n");
-
-	this->ecc.mode = NAND_ECC_HW_SYNDROME;
-	this->ecc.size = 512;
-	this->ecc.bytes = 8;
-	/* return the status of extra status and ECC checks */
-	this->errstat = rtc_from4_errstat;
-	/* set the nand_oobinfo to support FPGA H/W error detection */
-	this->ecc.layout = &rtc_from4_nand_oobinfo;
-	this->ecc.hwctl = rtc_from4_enable_hwecc;
-	this->ecc.calculate = rtc_from4_calculate_ecc;
-	this->ecc.correct = rtc_from4_correct_data;
-
-	/* We could create the decoder on demand, if memory is a concern.
-	 * This way we have it handy, if an error happens
-	 *
-	 * Symbolsize is 10 (bits)
-	 * Primitve polynomial is x^10+x^3+1
-	 * first consecutive root is 0
-	 * primitve element to generate roots = 1
-	 * generator polinomial degree = 6
-	 */
-	rs_decoder = init_rs(10, 0x409, 0, 1, 6);
-	if (!rs_decoder) {
-		printk(KERN_ERR "Could not create a RS decoder\n");
-		ret = -ENOMEM;
-		goto err_1;
-	}
-#else
-	printk(KERN_INFO "rtc_from4_init: using software ECC detection.\n");
-
-	this->ecc.mode = NAND_ECC_SOFT;
-#endif
-
-	/* set the bad block tables to support debugging */
-	this->bbt_td = &rtc_from4_bbt_main_descr;
-	this->bbt_md = &rtc_from4_bbt_mirror_descr;
-
-	/* Scan to find existence of the device */
-	if (nand_scan(rtc_from4_mtd, RTC_FROM4_MAX_CHIPS)) {
-		ret = -ENXIO;
-		goto err_2;
-	}
-
-	/* Perform 'device recovery' for each chip in case there was a power loss. */
-	for (i = 0; i < this->numchips; i++) {
-		deplete(rtc_from4_mtd, i);
-	}
-
-#if RTC_FROM4_NO_VIRTBLOCKS
-	/* use a smaller erase block to minimize wasted space when a block is bad */
-	/* note: this uses eight times as much RAM as using the default and makes */
-	/*       mounts take four times as long. */
-	rtc_from4_mtd->flags |= MTD_NO_VIRTBLOCKS;
-#endif
-
-	/* Register the partitions */
-	ret = add_mtd_partitions(rtc_from4_mtd, partition_info, NUM_PARTITIONS);
-	if (ret)
-		goto err_3;
-
-	/* Return happy */
-	return 0;
-err_3:
-	nand_release(rtc_from4_mtd);
-err_2:
-	free_rs(rs_decoder);
-err_1:
-	kfree(rtc_from4_mtd);
-	return ret;
-}
-
-module_init(rtc_from4_init);
-
-/*
- * Clean up routine
- */
-static void __exit rtc_from4_cleanup(void)
-{
-	/* Release resource, unregister partitions */
-	nand_release(rtc_from4_mtd);
-
-	/* Free the MTD device structure */
-	kfree(rtc_from4_mtd);
-
-#ifdef RTC_FROM4_HWECC
-	/* Free the reed solomon resources */
-	if (rs_decoder) {
-		free_rs(rs_decoder);
-	}
-#endif
-}
-
-module_exit(rtc_from4_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("d.marlin <dmarlin@redhat.com");
-MODULE_DESCRIPTION("Board-specific glue layer for AG-AND flash on Renesas FROM_BOARD4");
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 239aadfd01b..79acbb8691b 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -21,15 +21,17 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 
+#define pr_fmt(fmt) "nand-s3c2410: " fmt
+
 #ifdef CONFIG_MTD_NAND_S3C2410_DEBUG
 #define DEBUG
 #endif
 
 #include <linux/module.h>
 #include <linux/types.h>
-#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
+#include <linux/io.h>
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
@@ -43,23 +45,42 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
-#include <asm/io.h>
-
-#include <plat/regs-nand.h>
-#include <plat/nand.h>
-
-#ifdef CONFIG_MTD_NAND_S3C2410_HWECC
-static int hardware_ecc = 1;
-#else
-static int hardware_ecc = 0;
-#endif
-
-#ifdef CONFIG_MTD_NAND_S3C2410_CLKSTOP
-static int clock_stop = 1;
-#else
-static const int clock_stop = 0;
-#endif
-
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+
+#define S3C2410_NFREG(x) (x)
+
+#define S3C2410_NFCONF		S3C2410_NFREG(0x00)
+#define S3C2410_NFCMD		S3C2410_NFREG(0x04)
+#define S3C2410_NFADDR		S3C2410_NFREG(0x08)
+#define S3C2410_NFDATA		S3C2410_NFREG(0x0C)
+#define S3C2410_NFSTAT		S3C2410_NFREG(0x10)
+#define S3C2410_NFECC		S3C2410_NFREG(0x14)
+#define S3C2440_NFCONT		S3C2410_NFREG(0x04)
+#define S3C2440_NFCMD		S3C2410_NFREG(0x08)
+#define S3C2440_NFADDR		S3C2410_NFREG(0x0C)
+#define S3C2440_NFDATA		S3C2410_NFREG(0x10)
+#define S3C2440_NFSTAT		S3C2410_NFREG(0x20)
+#define S3C2440_NFMECC0		S3C2410_NFREG(0x2C)
+#define S3C2412_NFSTAT		S3C2410_NFREG(0x28)
+#define S3C2412_NFMECC0		S3C2410_NFREG(0x34)
+#define S3C2410_NFCONF_EN		(1<<15)
+#define S3C2410_NFCONF_INITECC		(1<<12)
+#define S3C2410_NFCONF_nFCE		(1<<11)
+#define S3C2410_NFCONF_TACLS(x)		((x)<<8)
+#define S3C2410_NFCONF_TWRPH0(x)	((x)<<4)
+#define S3C2410_NFCONF_TWRPH1(x)	((x)<<0)
+#define S3C2410_NFSTAT_BUSY		(1<<0)
+#define S3C2440_NFCONF_TACLS(x)		((x)<<12)
+#define S3C2440_NFCONF_TWRPH0(x)	((x)<<8)
+#define S3C2440_NFCONF_TWRPH1(x)	((x)<<4)
+#define S3C2440_NFCONT_INITECC		(1<<4)
+#define S3C2440_NFCONT_nFCE		(1<<1)
+#define S3C2440_NFCONT_ENABLE		(1<<0)
+#define S3C2440_NFSTAT_READY		(1<<0)
+#define S3C2412_NFCONF_NANDBOOT		(1<<31)
+#define S3C2412_NFCONT_INIT_MAIN_ECC	(1<<5)
+#define S3C2412_NFCONT_nFCE0		(1<<1)
+#define S3C2412_NFSTAT_READY		(1<<0)
 
 /* new oob placement block for use with hardware ecc generation
  */
@@ -96,6 +117,12 @@ enum s3c_cpu_type {
 	TYPE_S3C2440,
 };
 
+enum s3c_nand_clk_state {
+	CLOCK_DISABLE	= 0,
+	CLOCK_ENABLE,
+	CLOCK_SUSPEND,
+};
+
 /* overview of the s3c2410 nand state */
 
 /**
@@ -103,14 +130,14 @@ enum s3c_cpu_type {
  * @mtds: An array of MTD instances on this controoler.
  * @platform: The platform data for this board.
  * @device: The platform device we bound to.
- * @area: The IO area resource that came from request_mem_region().
  * @clk: The clock resource for this controller.
- * @regs: The area mapped for the hardware registers described by @area.
+ * @regs: The area mapped for the hardware registers.
  * @sel_reg: Pointer to the register controlling the NAND selection.
  * @sel_bit: The bit in @sel_reg to select the NAND chip.
  * @mtd_count: The number of MTDs created from this controller.
  * @save_sel: The contents of @sel_reg to be saved over suspend.
  * @clk_rate: The clock rate from @clk.
+ * @clk_state: The current clock state.
  * @cpu_type: The exact type of this controller.
  */
 struct s3c2410_nand_info {
@@ -121,7 +148,6 @@ struct s3c2410_nand_info {
 
 	/* device info */
 	struct device			*device;
-	struct resource			*area;
 	struct clk			*clk;
 	void __iomem			*regs;
 	void __iomem			*sel_reg;
@@ -129,6 +155,7 @@ struct s3c2410_nand_info {
 	int				mtd_count;
 	unsigned long			save_sel;
 	unsigned long			clk_rate;
+	enum s3c_nand_clk_state		clk_state;
 
 	enum s3c_cpu_type		cpu_type;
 
@@ -156,12 +183,38 @@ static struct s3c2410_nand_info *to_nand_info(struct platform_device *dev)
 
 static struct s3c2410_platform_nand *to_nand_plat(struct platform_device *dev)
 {
-	return dev->dev.platform_data;
+	return dev_get_platdata(&dev->dev);
 }
 
-static inline int allow_clk_stop(struct s3c2410_nand_info *info)
+static inline int allow_clk_suspend(struct s3c2410_nand_info *info)
+{
+#ifdef CONFIG_MTD_NAND_S3C2410_CLKSTOP
+	return 1;
+#else
+	return 0;
+#endif
+}
+
+/**
+ * s3c2410_nand_clk_set_state - Enable, disable or suspend NAND clock.
+ * @info: The controller instance.
+ * @new_state: State to which clock should be set.
+ */
+static void s3c2410_nand_clk_set_state(struct s3c2410_nand_info *info,
+		enum s3c_nand_clk_state new_state)
 {
-	return clock_stop;
+	if (!allow_clk_suspend(info) && new_state == CLOCK_SUSPEND)
+		return;
+
+	if (info->clk_state == CLOCK_ENABLE) {
+		if (new_state != CLOCK_ENABLE)
+			clk_disable(info->clk);
+	} else {
+		if (new_state == CLOCK_ENABLE)
+			clk_enable(info->clk);
+	}
+
+	info->clk_state = new_state;
 }
 
 /* timing calculations */
@@ -185,7 +238,8 @@ static int s3c_nand_calc_rate(int wanted, unsigned long clk, int max)
 	pr_debug("result %d from %ld, %d\n", result, clk, wanted);
 
 	if (result > max) {
-		printk("%d ns is too big for current clock rate %ld\n", wanted, clk);
+		pr_err("%d ns is too big for current clock rate %ld\n",
+			wanted, clk);
 		return -1;
 	}
 
@@ -195,7 +249,7 @@ static int s3c_nand_calc_rate(int wanted, unsigned long clk, int max)
 	return result;
 }
 
-#define to_ns(ticks,clk) (((ticks) * NS_IN_KHZ) / (unsigned int)(clk))
+#define to_ns(ticks, clk) (((ticks) * NS_IN_KHZ) / (unsigned int)(clk))
 
 /* controller setup */
 
@@ -238,7 +292,8 @@ static int s3c2410_nand_setrate(struct s3c2410_nand_info *info)
 	}
 
 	dev_info(info->device, "Tacls=%d, %dns Twrph0=%d %dns, Twrph1=%d %dns\n",
-	       tacls, to_ns(tacls, clkrate), twrph0, to_ns(twrph0, clkrate), twrph1, to_ns(twrph1, clkrate));
+		tacls, to_ns(tacls, clkrate), twrph0, to_ns(twrph0, clkrate),
+						twrph1, to_ns(twrph1, clkrate));
 
 	switch (info->cpu_type) {
 	case TYPE_S3C2410:
@@ -295,13 +350,13 @@ static int s3c2410_nand_inithw(struct s3c2410_nand_info *info)
 	if (ret < 0)
 		return ret;
 
- 	switch (info->cpu_type) {
- 	case TYPE_S3C2410:
+	switch (info->cpu_type) {
+	case TYPE_S3C2410:
 	default:
 		break;
 
- 	case TYPE_S3C2440:
- 	case TYPE_S3C2412:
+	case TYPE_S3C2440:
+	case TYPE_S3C2412:
 		/* enable the controller and de-assert nFCE */
 
 		writel(S3C2440_NFCONT_ENABLE, info->regs + S3C2440_NFCONT);
@@ -333,8 +388,8 @@ static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip)
 	nmtd = this->priv;
 	info = nmtd->info;
 
-	if (chip != -1 && allow_clk_stop(info))
-		clk_enable(info->clk);
+	if (chip != -1)
+		s3c2410_nand_clk_set_state(info, CLOCK_ENABLE);
 
 	cur = readl(info->sel_reg);
 
@@ -356,8 +411,8 @@ static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip)
 
 	writel(cur, info->sel_reg);
 
-	if (chip == -1 && allow_clk_stop(info))
-		clk_disable(info->clk);
+	if (chip == -1)
+		s3c2410_nand_clk_set_state(info, CLOCK_SUSPEND);
 }
 
 /* s3c2410_nand_hwcontrol
@@ -420,6 +475,7 @@ static int s3c2412_nand_devready(struct mtd_info *mtd)
 
 /* ECC handling functions */
 
+#ifdef CONFIG_MTD_NAND_S3C2410_HWECC
 static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat,
 				     u_char *read_ecc, u_char *calc_ecc)
 {
@@ -433,10 +489,8 @@ static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat,
 	diff1 = read_ecc[1] ^ calc_ecc[1];
 	diff2 = read_ecc[2] ^ calc_ecc[2];
 
-	pr_debug("%s: rd %02x%02x%02x calc %02x%02x%02x diff %02x%02x%02x\n",
-		 __func__,
-		 read_ecc[0], read_ecc[1], read_ecc[2],
-		 calc_ecc[0], calc_ecc[1], calc_ecc[2],
+	pr_debug("%s: rd %*phN calc %*phN diff %02x%02x%02x\n",
+		 __func__, 3, read_ecc, 3, calc_ecc,
 		 diff0, diff1, diff2);
 
 	if (diff0 == 0 && diff1 == 0 && diff2 == 0)
@@ -516,7 +570,8 @@ static void s3c2412_nand_enable_hwecc(struct mtd_info *mtd, int mode)
 	unsigned long ctrl;
 
 	ctrl = readl(info->regs + S3C2440_NFCONT);
-	writel(ctrl | S3C2412_NFCONT_INIT_MAIN_ECC, info->regs + S3C2440_NFCONT);
+	writel(ctrl | S3C2412_NFCONT_INIT_MAIN_ECC,
+	       info->regs + S3C2440_NFCONT);
 }
 
 static void s3c2440_nand_enable_hwecc(struct mtd_info *mtd, int mode)
@@ -528,7 +583,8 @@ static void s3c2440_nand_enable_hwecc(struct mtd_info *mtd, int mode)
 	writel(ctrl | S3C2440_NFCONT_INITECC, info->regs + S3C2440_NFCONT);
 }
 
-static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
+static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+				      u_char *ecc_code)
 {
 	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
 
@@ -536,13 +592,13 @@ static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u
 	ecc_code[1] = readb(info->regs + S3C2410_NFECC + 1);
 	ecc_code[2] = readb(info->regs + S3C2410_NFECC + 2);
 
-	pr_debug("%s: returning ecc %02x%02x%02x\n", __func__,
-		 ecc_code[0], ecc_code[1], ecc_code[2]);
+	pr_debug("%s: returning ecc %*phN\n", __func__, 3, ecc_code);
 
 	return 0;
 }
 
-static int s3c2412_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
+static int s3c2412_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+				      u_char *ecc_code)
 {
 	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
 	unsigned long ecc = readl(info->regs + S3C2412_NFMECC0);
@@ -551,12 +607,13 @@ static int s3c2412_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u
 	ecc_code[1] = ecc >> 8;
 	ecc_code[2] = ecc >> 16;
 
-	pr_debug("calculate_ecc: returning ecc %02x,%02x,%02x\n", ecc_code[0], ecc_code[1], ecc_code[2]);
+	pr_debug("%s: returning ecc %*phN\n", __func__, 3, ecc_code);
 
 	return 0;
 }
 
-static int s3c2440_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
+static int s3c2440_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+				      u_char *ecc_code)
 {
 	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
 	unsigned long ecc = readl(info->regs + S3C2440_NFMECC0);
@@ -569,6 +626,7 @@ static int s3c2440_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u
 
 	return 0;
 }
+#endif
 
 /* over-ride the standard functions for a little more speed. We can
  * use read/write block to move the data buffers to/from the controller
@@ -595,13 +653,15 @@ static void s3c2440_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 	}
 }
 
-static void s3c2410_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+static void s3c2410_nand_write_buf(struct mtd_info *mtd, const u_char *buf,
+				   int len)
 {
 	struct nand_chip *this = mtd->priv;
 	writesb(this->IO_ADDR_W, buf, len);
 }
 
-static void s3c2440_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+static void s3c2440_nand_write_buf(struct mtd_info *mtd, const u_char *buf,
+				   int len)
 {
 	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
 
@@ -645,7 +705,8 @@ static inline int s3c2410_nand_cpufreq_register(struct s3c2410_nand_info *info)
 					 CPUFREQ_TRANSITION_NOTIFIER);
 }
 
-static inline void s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info)
+static inline void
+s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info)
 {
 	cpufreq_unregister_notifier(&info->freq_transition,
 				    CPUFREQ_TRANSITION_NOTIFIER);
@@ -657,7 +718,8 @@ static inline int s3c2410_nand_cpufreq_register(struct s3c2410_nand_info *info)
 	return 0;
 }
 
-static inline void s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info)
+static inline void
+s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info)
 {
 }
 #endif
@@ -668,8 +730,6 @@ static int s3c24xx_nand_remove(struct platform_device *pdev)
 {
 	struct s3c2410_nand_info *info = to_nand_info(pdev);
 
-	platform_set_drvdata(pdev, NULL);
-
 	if (info == NULL)
 		return 0;
 
@@ -687,70 +747,29 @@ static int s3c24xx_nand_remove(struct platform_device *pdev)
 			pr_debug("releasing mtd %d (%p)\n", mtdno, ptr);
 			nand_release(&ptr->mtd);
 		}
-
-		kfree(info->mtds);
 	}
 
 	/* free the common resources */
 
-	if (info->clk != NULL && !IS_ERR(info->clk)) {
-		if (!allow_clk_stop(info))
-			clk_disable(info->clk);
-		clk_put(info->clk);
-	}
-
-	if (info->regs != NULL) {
-		iounmap(info->regs);
-		info->regs = NULL;
-	}
-
-	if (info->area != NULL) {
-		release_resource(info->area);
-		kfree(info->area);
-		info->area = NULL;
-	}
-
-	kfree(info);
+	if (!IS_ERR(info->clk))
+		s3c2410_nand_clk_set_state(info, CLOCK_DISABLE);
 
 	return 0;
 }
 
-#ifdef CONFIG_MTD_PARTITIONS
-const char *part_probes[] = { "cmdlinepart", NULL };
 static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info,
 				      struct s3c2410_nand_mtd *mtd,
 				      struct s3c2410_nand_set *set)
 {
-	struct mtd_partition *part_info;
-	int nr_part = 0;
-
-	if (set == NULL)
-		return add_mtd_device(&mtd->mtd);
-
-	if (set->nr_partitions == 0) {
+	if (set) {
 		mtd->mtd.name = set->name;
-		nr_part = parse_mtd_partitions(&mtd->mtd, part_probes,
-						&part_info, 0);
-	} else {
-		if (set->nr_partitions > 0 && set->partitions != NULL) {
-			nr_part = set->nr_partitions;
-			part_info = set->partitions;
-		}
-	}
 
-	if (nr_part > 0 && part_info)
-		return add_mtd_partitions(&mtd->mtd, part_info, nr_part);
+		return mtd_device_parse_register(&mtd->mtd, NULL, NULL,
+					 set->partitions, set->nr_partitions);
+	}
 
-	return add_mtd_device(&mtd->mtd);
-}
-#else
-static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info,
-				      struct s3c2410_nand_mtd *mtd,
-				      struct s3c2410_nand_set *set)
-{
-	return add_mtd_device(&mtd->mtd);
+	return -ENODEV;
 }
-#endif
 
 /**
  * s3c2410_nand_init_chip - initialise a single instance of an chip
@@ -807,7 +826,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
 			dev_info(info->device, "System booted from NAND\n");
 
 		break;
-  	}
+	}
 
 	chip->IO_ADDR_R = chip->IO_ADDR_W;
 
@@ -816,31 +835,31 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
 	nmtd->mtd.owner    = THIS_MODULE;
 	nmtd->set	   = set;
 
-	if (hardware_ecc) {
-		chip->ecc.calculate = s3c2410_nand_calculate_ecc;
-		chip->ecc.correct   = s3c2410_nand_correct_data;
-		chip->ecc.mode	    = NAND_ECC_HW;
-
-		switch (info->cpu_type) {
-		case TYPE_S3C2410:
-			chip->ecc.hwctl	    = s3c2410_nand_enable_hwecc;
-			chip->ecc.calculate = s3c2410_nand_calculate_ecc;
-			break;
+#ifdef CONFIG_MTD_NAND_S3C2410_HWECC
+	chip->ecc.calculate = s3c2410_nand_calculate_ecc;
+	chip->ecc.correct   = s3c2410_nand_correct_data;
+	chip->ecc.mode	    = NAND_ECC_HW;
+	chip->ecc.strength  = 1;
 
-		case TYPE_S3C2412:
-  			chip->ecc.hwctl     = s3c2412_nand_enable_hwecc;
-  			chip->ecc.calculate = s3c2412_nand_calculate_ecc;
-			break;
+	switch (info->cpu_type) {
+	case TYPE_S3C2410:
+		chip->ecc.hwctl	    = s3c2410_nand_enable_hwecc;
+		chip->ecc.calculate = s3c2410_nand_calculate_ecc;
+		break;
 
-		case TYPE_S3C2440:
-  			chip->ecc.hwctl     = s3c2440_nand_enable_hwecc;
-  			chip->ecc.calculate = s3c2440_nand_calculate_ecc;
-			break;
+	case TYPE_S3C2412:
+		chip->ecc.hwctl     = s3c2412_nand_enable_hwecc;
+		chip->ecc.calculate = s3c2412_nand_calculate_ecc;
+		break;
 
-		}
-	} else {
-		chip->ecc.mode	    = NAND_ECC_SOFT;
+	case TYPE_S3C2440:
+		chip->ecc.hwctl     = s3c2440_nand_enable_hwecc;
+		chip->ecc.calculate = s3c2440_nand_calculate_ecc;
+		break;
 	}
+#else
+	chip->ecc.mode	    = NAND_ECC_SOFT;
+#endif
 
 	if (set->ecc_layout != NULL)
 		chip->ecc.layout = set->ecc_layout;
@@ -866,8 +885,10 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
 	/* If you use u-boot BBT creation code, specifying this flag will
 	 * let the kernel fish out the BBT from the NAND, and also skip the
 	 * full NAND scan that can take 1/2s or so. Little things... */
-	if (set->flash_bbt)
-		chip->options |= NAND_USE_FLASH_BBT | NAND_SKIP_BBTSCAN;
+	if (set->flash_bbt) {
+		chip->bbt_options |= NAND_BBT_USE_FLASH;
+		chip->options |= NAND_SKIP_BBTSCAN;
+	}
 }
 
 /**
@@ -892,7 +913,7 @@ static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
 	if (chip->ecc.mode != NAND_ECC_HW)
 		return;
 
-		/* change the behaviour depending on wether we are using
+		/* change the behaviour depending on whether we are using
 		 * the large or small page nand device */
 
 	if (chip->page_shift > 10) {
@@ -915,7 +936,7 @@ static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
 static int s3c24xx_nand_probe(struct platform_device *pdev)
 {
 	struct s3c2410_platform_nand *plat = to_nand_plat(pdev);
-	enum s3c_cpu_type cpu_type; 
+	enum s3c_cpu_type cpu_type;
 	struct s3c2410_nand_info *info;
 	struct s3c2410_nand_mtd *nmtd;
 	struct s3c2410_nand_set *sets;
@@ -929,9 +950,8 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
 
 	pr_debug("s3c2410_nand_probe(%p)\n", pdev);
 
-	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
 	if (info == NULL) {
-		dev_err(&pdev->dev, "no memory for flash info\n");
 		err = -ENOMEM;
 		goto exit_error;
 	}
@@ -943,37 +963,28 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
 
 	/* get the clock source and enable it */
 
-	info->clk = clk_get(&pdev->dev, "nand");
+	info->clk = devm_clk_get(&pdev->dev, "nand");
 	if (IS_ERR(info->clk)) {
 		dev_err(&pdev->dev, "failed to get clock\n");
 		err = -ENOENT;
 		goto exit_error;
 	}
 
-	clk_enable(info->clk);
+	s3c2410_nand_clk_set_state(info, CLOCK_ENABLE);
 
 	/* allocate and map the resource */
 
 	/* currently we assume we have the one resource */
-	res  = pdev->resource;
+	res = pdev->resource;
 	size = resource_size(res);
 
-	info->area = request_mem_region(res->start, size, pdev->name);
-
-	if (info->area == NULL) {
-		dev_err(&pdev->dev, "cannot reserve register region\n");
-		err = -ENOENT;
-		goto exit_error;
-	}
-
-	info->device     = &pdev->dev;
-	info->platform   = plat;
-	info->regs       = ioremap(res->start, size);
-	info->cpu_type   = cpu_type;
+	info->device	= &pdev->dev;
+	info->platform	= plat;
+	info->cpu_type	= cpu_type;
 
-	if (info->regs == NULL) {
-		dev_err(&pdev->dev, "cannot reserve register region\n");
-		err = -EIO;
+	info->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(info->regs)) {
+		err = PTR_ERR(info->regs);
 		goto exit_error;
 	}
 
@@ -993,9 +1004,8 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
 	/* allocate our information */
 
 	size = nr_sets * sizeof(*info->mtds);
-	info->mtds = kzalloc(size, GFP_KERNEL);
+	info->mtds = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
 	if (info->mtds == NULL) {
-		dev_err(&pdev->dev, "failed to allocate mtd storage\n");
 		err = -ENOMEM;
 		goto exit_error;
 	}
@@ -1005,7 +1015,8 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
 	nmtd = info->mtds;
 
 	for (setno = 0; setno < nr_sets; setno++, nmtd++) {
-		pr_debug("initialising set %d (%p, info %p)\n", setno, nmtd, info);
+		pr_debug("initialising set %d (%p, info %p)\n",
+			 setno, nmtd, info);
 
 		s3c2410_nand_init_chip(info, nmtd, sets);
 
@@ -1029,9 +1040,9 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
 		goto exit_error;
 	}
 
-	if (allow_clk_stop(info)) {
+	if (allow_clk_suspend(info)) {
 		dev_info(&pdev->dev, "clock idle support enabled\n");
-		clk_disable(info->clk);
+		s3c2410_nand_clk_set_state(info, CLOCK_SUSPEND);
 	}
 
 	pr_debug("initialised ok\n");
@@ -1062,8 +1073,7 @@ static int s3c24xx_nand_suspend(struct platform_device *dev, pm_message_t pm)
 
 		writel(info->save_sel | info->sel_bit, info->sel_reg);
 
-		if (!allow_clk_stop(info))
-			clk_disable(info->clk);
+		s3c2410_nand_clk_set_state(info, CLOCK_DISABLE);
 	}
 
 	return 0;
@@ -1075,7 +1085,7 @@ static int s3c24xx_nand_resume(struct platform_device *dev)
 	unsigned long sel;
 
 	if (info) {
-		clk_enable(info->clk);
+		s3c2410_nand_clk_set_state(info, CLOCK_ENABLE);
 		s3c2410_nand_inithw(info);
 
 		/* Restore the state of the nFCE line. */
@@ -1085,8 +1095,7 @@ static int s3c24xx_nand_resume(struct platform_device *dev)
 		sel |= info->save_sel & info->sel_bit;
 		writel(sel, info->sel_reg);
 
-		if (allow_clk_stop(info))
-			clk_disable(info->clk);
+		s3c2410_nand_clk_set_state(info, CLOCK_SUSPEND);
 	}
 
 	return 0;
@@ -1130,20 +1139,7 @@ static struct platform_driver s3c24xx_nand_driver = {
 	},
 };
 
-static int __init s3c2410_nand_init(void)
-{
-	printk("S3C24XX NAND Driver, (c) 2004 Simtec Electronics\n");
-
-	return platform_driver_register(&s3c24xx_nand_driver);
-}
-
-static void __exit s3c2410_nand_exit(void)
-{
-	platform_driver_unregister(&s3c24xx_nand_driver);
-}
-
-module_init(s3c2410_nand_init);
-module_exit(s3c2410_nand_exit);
+module_platform_driver(s3c24xx_nand_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index 546c2f0eb2e..c0670237e7a 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -23,10 +23,20 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/completion.h>
 #include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_mtd.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/sh_dma.h>
 #include <linux/slab.h>
+#include <linux/string.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -42,11 +52,17 @@ static struct nand_ecclayout flctl_4secc_oob_16 = {
 };
 
 static struct nand_ecclayout flctl_4secc_oob_64 = {
-	.eccbytes = 10,
-	.eccpos = {48, 49, 50, 51, 52, 53, 54, 55, 56, 57},
+	.eccbytes = 4 * 10,
+	.eccpos = {
+		 6,  7,  8,  9, 10, 11, 12, 13, 14, 15,
+		22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+		38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
+		54, 55, 56, 57, 58, 59, 60, 61, 62, 63 },
 	.oobfree = {
-		{.offset = 60,
-		. length = 4} },
+		{.offset =  2, .length = 4},
+		{.offset = 16, .length = 6},
+		{.offset = 32, .length = 6},
+		{.offset = 48, .length = 6} },
 };
 
 static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
@@ -60,15 +76,15 @@ static struct nand_bbt_descr flctl_4secc_smallpage = {
 
 static struct nand_bbt_descr flctl_4secc_largepage = {
 	.options = NAND_BBT_SCAN2NDPAGE,
-	.offs = 58,
+	.offs = 0,
 	.len = 2,
 	.pattern = scan_ff_pattern,
 };
 
 static void empty_fifo(struct sh_flctl *flctl)
 {
-	writel(0x000c0000, FLINTDMACR(flctl));	/* FIFO Clear */
-	writel(0x00000000, FLINTDMACR(flctl));	/* Clear Error flags */
+	writel(flctl->flintdmacr_base | AC1CLR | AC0CLR, FLINTDMACR(flctl));
+	writel(flctl->flintdmacr_base, FLINTDMACR(flctl));
 }
 
 static void start_translation(struct sh_flctl *flctl)
@@ -78,7 +94,7 @@ static void start_translation(struct sh_flctl *flctl)
 
 static void timeout_error(struct sh_flctl *flctl, const char *str)
 {
-	dev_err(&flctl->pdev->dev, "Timeout occured in %s\n", str);
+	dev_err(&flctl->pdev->dev, "Timeout occurred in %s\n", str);
 }
 
 static void wait_completion(struct sh_flctl *flctl)
@@ -97,6 +113,84 @@ static void wait_completion(struct sh_flctl *flctl)
 	writeb(0x0, FLTRCR(flctl));
 }
 
+static void flctl_dma_complete(void *param)
+{
+	struct sh_flctl *flctl = param;
+
+	complete(&flctl->dma_complete);
+}
+
+static void flctl_release_dma(struct sh_flctl *flctl)
+{
+	if (flctl->chan_fifo0_rx) {
+		dma_release_channel(flctl->chan_fifo0_rx);
+		flctl->chan_fifo0_rx = NULL;
+	}
+	if (flctl->chan_fifo0_tx) {
+		dma_release_channel(flctl->chan_fifo0_tx);
+		flctl->chan_fifo0_tx = NULL;
+	}
+}
+
+static void flctl_setup_dma(struct sh_flctl *flctl)
+{
+	dma_cap_mask_t mask;
+	struct dma_slave_config cfg;
+	struct platform_device *pdev = flctl->pdev;
+	struct sh_flctl_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	int ret;
+
+	if (!pdata)
+		return;
+
+	if (pdata->slave_id_fifo0_tx <= 0 || pdata->slave_id_fifo0_rx <= 0)
+		return;
+
+	/* We can only either use DMA for both Tx and Rx or not use it at all */
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+
+	flctl->chan_fifo0_tx = dma_request_channel(mask, shdma_chan_filter,
+				(void *)(uintptr_t)pdata->slave_id_fifo0_tx);
+	dev_dbg(&pdev->dev, "%s: TX: got channel %p\n", __func__,
+		flctl->chan_fifo0_tx);
+
+	if (!flctl->chan_fifo0_tx)
+		return;
+
+	memset(&cfg, 0, sizeof(cfg));
+	cfg.slave_id = pdata->slave_id_fifo0_tx;
+	cfg.direction = DMA_MEM_TO_DEV;
+	cfg.dst_addr = (dma_addr_t)FLDTFIFO(flctl);
+	cfg.src_addr = 0;
+	ret = dmaengine_slave_config(flctl->chan_fifo0_tx, &cfg);
+	if (ret < 0)
+		goto err;
+
+	flctl->chan_fifo0_rx = dma_request_channel(mask, shdma_chan_filter,
+				(void *)(uintptr_t)pdata->slave_id_fifo0_rx);
+	dev_dbg(&pdev->dev, "%s: RX: got channel %p\n", __func__,
+		flctl->chan_fifo0_rx);
+
+	if (!flctl->chan_fifo0_rx)
+		goto err;
+
+	cfg.slave_id = pdata->slave_id_fifo0_rx;
+	cfg.direction = DMA_DEV_TO_MEM;
+	cfg.dst_addr = 0;
+	cfg.src_addr = (dma_addr_t)FLDTFIFO(flctl);
+	ret = dmaengine_slave_config(flctl->chan_fifo0_rx, &cfg);
+	if (ret < 0)
+		goto err;
+
+	init_completion(&flctl->dma_complete);
+
+	return;
+
+err:
+	flctl_release_dma(flctl);
+}
+
 static void set_addr(struct mtd_info *mtd, int column, int page_addr)
 {
 	struct sh_flctl *flctl = mtd_to_flctl(mtd);
@@ -157,27 +251,56 @@ static void wait_wfifo_ready(struct sh_flctl *flctl)
 	timeout_error(flctl, __func__);
 }
 
-static int wait_recfifo_ready(struct sh_flctl *flctl, int sector_number)
+static enum flctl_ecc_res_t wait_recfifo_ready
+		(struct sh_flctl *flctl, int sector_number)
 {
 	uint32_t timeout = LOOP_TIMEOUT_MAX;
-	int checked[4];
 	void __iomem *ecc_reg[4];
 	int i;
+	int state = FL_SUCCESS;
 	uint32_t data, size;
 
-	memset(checked, 0, sizeof(checked));
-
+	/*
+	 * First this loops checks in FLDTCNTR if we are ready to read out the
+	 * oob data. This is the case if either all went fine without errors or
+	 * if the bottom part of the loop corrected the errors or marked them as
+	 * uncorrectable and the controller is given time to push the data into
+	 * the FIFO.
+	 */
 	while (timeout--) {
+		/* check if all is ok and we can read out the OOB */
 		size = readl(FLDTCNTR(flctl)) >> 24;
-		if (size & 0xFF)
-			return 0;	/* success */
+		if ((size & 0xFF) == 4)
+			return state;
+
+		/* check if a correction code has been calculated */
+		if (!(readl(FL4ECCCR(flctl)) & _4ECCEND)) {
+			/*
+			 * either we wait for the fifo to be filled or a
+			 * correction pattern is being generated
+			 */
+			udelay(1);
+			continue;
+		}
 
-		if (readl(FL4ECCCR(flctl)) & _4ECCFA)
-			return 1;	/* can't correct */
+		/* check for an uncorrectable error */
+		if (readl(FL4ECCCR(flctl)) & _4ECCFA) {
+			/* check if we face a non-empty page */
+			for (i = 0; i < 512; i++) {
+				if (flctl->done_buff[i] != 0xff) {
+					state = FL_ERROR; /* can't correct */
+					break;
+				}
+			}
 
-		udelay(1);
-		if (!(readl(FL4ECCCR(flctl)) & _4ECCEND))
+			if (state == FL_SUCCESS)
+				dev_dbg(&flctl->pdev->dev,
+				"reading empty sector %d, ecc error ignored\n",
+				sector_number);
+
+			writel(0, FL4ECCCR(flctl));
 			continue;
+		}
 
 		/* start error correction */
 		ecc_reg[0] = FL4ECCRESULT0(flctl);
@@ -186,28 +309,26 @@ static int wait_recfifo_ready(struct sh_flctl *flctl, int sector_number)
 		ecc_reg[3] = FL4ECCRESULT3(flctl);
 
 		for (i = 0; i < 3; i++) {
+			uint8_t org;
+			unsigned int index;
+
 			data = readl(ecc_reg[i]);
-			if (data != INIT_FL4ECCRESULT_VAL && !checked[i]) {
-				uint8_t org;
-				int index;
-
-				if (flctl->page_size)
-					index = (512 * sector_number) +
-						(data >> 16);
-				else
-					index = data >> 16;
-
-				org = flctl->done_buff[index];
-				flctl->done_buff[index] = org ^ (data & 0xFF);
-				checked[i] = 1;
-			}
-		}
 
+			if (flctl->page_size)
+				index = (512 * sector_number) +
+					(data >> 16);
+			else
+				index = data >> 16;
+
+			org = flctl->done_buff[index];
+			flctl->done_buff[index] = org ^ (data & 0xFF);
+		}
+		state = FL_REPAIRABLE;
 		writel(0, FL4ECCCR(flctl));
 	}
 
 	timeout_error(flctl, __func__);
-	return 1;	/* timeout */
+	return FL_TIMEOUT;	/* timeout */
 }
 
 static void wait_wecfifo_ready(struct sh_flctl *flctl)
@@ -225,6 +346,70 @@ static void wait_wecfifo_ready(struct sh_flctl *flctl)
 	timeout_error(flctl, __func__);
 }
 
+static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf,
+					int len, enum dma_data_direction dir)
+{
+	struct dma_async_tx_descriptor *desc = NULL;
+	struct dma_chan *chan;
+	enum dma_transfer_direction tr_dir;
+	dma_addr_t dma_addr;
+	dma_cookie_t cookie = -EINVAL;
+	uint32_t reg;
+	int ret;
+
+	if (dir == DMA_FROM_DEVICE) {
+		chan = flctl->chan_fifo0_rx;
+		tr_dir = DMA_DEV_TO_MEM;
+	} else {
+		chan = flctl->chan_fifo0_tx;
+		tr_dir = DMA_MEM_TO_DEV;
+	}
+
+	dma_addr = dma_map_single(chan->device->dev, buf, len, dir);
+
+	if (dma_addr)
+		desc = dmaengine_prep_slave_single(chan, dma_addr, len,
+			tr_dir, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+
+	if (desc) {
+		reg = readl(FLINTDMACR(flctl));
+		reg |= DREQ0EN;
+		writel(reg, FLINTDMACR(flctl));
+
+		desc->callback = flctl_dma_complete;
+		desc->callback_param = flctl;
+		cookie = dmaengine_submit(desc);
+
+		dma_async_issue_pending(chan);
+	} else {
+		/* DMA failed, fall back to PIO */
+		flctl_release_dma(flctl);
+		dev_warn(&flctl->pdev->dev,
+			 "DMA failed, falling back to PIO\n");
+		ret = -EIO;
+		goto out;
+	}
+
+	ret =
+	wait_for_completion_timeout(&flctl->dma_complete,
+				msecs_to_jiffies(3000));
+
+	if (ret <= 0) {
+		chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
+		dev_err(&flctl->pdev->dev, "wait_for_completion_timeout\n");
+	}
+
+out:
+	reg = readl(FLINTDMACR(flctl));
+	reg &= ~DREQ0EN;
+	writel(reg, FLINTDMACR(flctl));
+
+	dma_unmap_single(chan->device->dev, dma_addr, len, dir);
+
+	/* ret > 0 is success */
+	return ret;
+}
+
 static void read_datareg(struct sh_flctl *flctl, int offset)
 {
 	unsigned long data;
@@ -240,50 +425,84 @@ static void read_fiforeg(struct sh_flctl *flctl, int rlen, int offset)
 {
 	int i, len_4align;
 	unsigned long *buf = (unsigned long *)&flctl->done_buff[offset];
-	void *fifo_addr = (void *)FLDTFIFO(flctl);
 
 	len_4align = (rlen + 3) / 4;
 
+	/* initiate DMA transfer */
+	if (flctl->chan_fifo0_rx && rlen >= 32 &&
+		flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_DEV_TO_MEM) > 0)
+			goto convert;	/* DMA success */
+
+	/* do polling transfer */
 	for (i = 0; i < len_4align; i++) {
 		wait_rfifo_ready(flctl);
-		buf[i] = readl(fifo_addr);
-		buf[i] = be32_to_cpu(buf[i]);
+		buf[i] = readl(FLDTFIFO(flctl));
 	}
+
+convert:
+	for (i = 0; i < len_4align; i++)
+		buf[i] = be32_to_cpu(buf[i]);
 }
 
-static int read_ecfiforeg(struct sh_flctl *flctl, uint8_t *buff, int sector)
+static enum flctl_ecc_res_t read_ecfiforeg
+		(struct sh_flctl *flctl, uint8_t *buff, int sector)
 {
 	int i;
+	enum flctl_ecc_res_t res;
 	unsigned long *ecc_buf = (unsigned long *)buff;
-	void *fifo_addr = (void *)FLECFIFO(flctl);
 
-	for (i = 0; i < 4; i++) {
-		if (wait_recfifo_ready(flctl , sector))
-			return 1;
-		ecc_buf[i] = readl(fifo_addr);
-		ecc_buf[i] = be32_to_cpu(ecc_buf[i]);
+	res = wait_recfifo_ready(flctl , sector);
+
+	if (res != FL_ERROR) {
+		for (i = 0; i < 4; i++) {
+			ecc_buf[i] = readl(FLECFIFO(flctl));
+			ecc_buf[i] = be32_to_cpu(ecc_buf[i]);
+		}
 	}
 
-	return 0;
+	return res;
 }
 
-static void write_fiforeg(struct sh_flctl *flctl, int rlen, int offset)
+static void write_fiforeg(struct sh_flctl *flctl, int rlen,
+						unsigned int offset)
 {
 	int i, len_4align;
-	unsigned long *data = (unsigned long *)&flctl->done_buff[offset];
-	void *fifo_addr = (void *)FLDTFIFO(flctl);
+	unsigned long *buf = (unsigned long *)&flctl->done_buff[offset];
 
 	len_4align = (rlen + 3) / 4;
 	for (i = 0; i < len_4align; i++) {
 		wait_wfifo_ready(flctl);
-		writel(cpu_to_be32(data[i]), fifo_addr);
+		writel(cpu_to_be32(buf[i]), FLDTFIFO(flctl));
+	}
+}
+
+static void write_ec_fiforeg(struct sh_flctl *flctl, int rlen,
+						unsigned int offset)
+{
+	int i, len_4align;
+	unsigned long *buf = (unsigned long *)&flctl->done_buff[offset];
+
+	len_4align = (rlen + 3) / 4;
+
+	for (i = 0; i < len_4align; i++)
+		buf[i] = cpu_to_be32(buf[i]);
+
+	/* initiate DMA transfer */
+	if (flctl->chan_fifo0_tx && rlen >= 32 &&
+		flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_MEM_TO_DEV) > 0)
+			return;	/* DMA success */
+
+	/* do polling transfer */
+	for (i = 0; i < len_4align; i++) {
+		wait_wecfifo_ready(flctl);
+		writel(buf[i], FLECFIFO(flctl));
 	}
 }
 
 static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_val)
 {
 	struct sh_flctl *flctl = mtd_to_flctl(mtd);
-	uint32_t flcmncr_val = readl(FLCMNCR(flctl)) & ~SEL_16BIT;
+	uint32_t flcmncr_val = flctl->flcmncr_base & ~SEL_16BIT;
 	uint32_t flcmdcr_val, addr_len_bytes = 0;
 
 	/* Set SNAND bit if page size is 2048byte */
@@ -303,6 +522,7 @@ static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_va
 		break;
 	case NAND_CMD_READ0:
 	case NAND_CMD_READOOB:
+	case NAND_CMD_RNDOUT:
 		addr_len_bytes = flctl->rw_ADRCNT;
 		flcmdcr_val |= CDSRC_E;
 		if (flctl->chip.options & NAND_BUSWIDTH_16)
@@ -320,6 +540,7 @@ static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_va
 		break;
 	case NAND_CMD_READID:
 		flcmncr_val &= ~SNAND_E;
+		flcmdcr_val |= CDSRC_E;
 		addr_len_bytes = ADRCNT_1;
 		break;
 	case NAND_CMD_STATUS:
@@ -341,75 +562,67 @@ static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_va
 }
 
 static int flctl_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
-				uint8_t *buf, int page)
+				uint8_t *buf, int oob_required, int page)
 {
-	int i, eccsize = chip->ecc.size;
-	int eccbytes = chip->ecc.bytes;
-	int eccsteps = chip->ecc.steps;
-	uint8_t *p = buf;
-	struct sh_flctl *flctl = mtd_to_flctl(mtd);
-
-	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
-		chip->read_buf(mtd, p, eccsize);
-
-	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
-		if (flctl->hwecc_cant_correct[i])
-			mtd->ecc_stats.failed++;
-		else
-			mtd->ecc_stats.corrected += 0;
-	}
-
+	chip->read_buf(mtd, buf, mtd->writesize);
+	if (oob_required)
+		chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
 	return 0;
 }
 
-static void flctl_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
-				   const uint8_t *buf)
+static int flctl_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
+				   const uint8_t *buf, int oob_required)
 {
-	int i, eccsize = chip->ecc.size;
-	int eccbytes = chip->ecc.bytes;
-	int eccsteps = chip->ecc.steps;
-	const uint8_t *p = buf;
-
-	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
-		chip->write_buf(mtd, p, eccsize);
+	chip->write_buf(mtd, buf, mtd->writesize);
+	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+	return 0;
 }
 
 static void execmd_read_page_sector(struct mtd_info *mtd, int page_addr)
 {
 	struct sh_flctl *flctl = mtd_to_flctl(mtd);
 	int sector, page_sectors;
+	enum flctl_ecc_res_t ecc_result;
 
-	if (flctl->page_size)
-		page_sectors = 4;
-	else
-		page_sectors = 1;
-
-	writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE | _4ECCCORRECT,
-		 FLCMNCR(flctl));
+	page_sectors = flctl->page_size ? 4 : 1;
 
 	set_cmd_regs(mtd, NAND_CMD_READ0,
 		(NAND_CMD_READSTART << 8) | NAND_CMD_READ0);
 
-	for (sector = 0; sector < page_sectors; sector++) {
-		int ret;
+	writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE | _4ECCCORRECT,
+		 FLCMNCR(flctl));
+	writel(readl(FLCMDCR(flctl)) | page_sectors, FLCMDCR(flctl));
+	writel(page_addr << 2, FLADR(flctl));
 
-		empty_fifo(flctl);
-		writel(readl(FLCMDCR(flctl)) | 1, FLCMDCR(flctl));
-		writel(page_addr << 2 | sector, FLADR(flctl));
+	empty_fifo(flctl);
+	start_translation(flctl);
 
-		start_translation(flctl);
+	for (sector = 0; sector < page_sectors; sector++) {
 		read_fiforeg(flctl, 512, 512 * sector);
 
-		ret = read_ecfiforeg(flctl,
+		ecc_result = read_ecfiforeg(flctl,
 			&flctl->done_buff[mtd->writesize + 16 * sector],
 			sector);
 
-		if (ret)
-			flctl->hwecc_cant_correct[sector] = 1;
-
-		writel(0x0, FL4ECCCR(flctl));
-		wait_completion(flctl);
+		switch (ecc_result) {
+		case FL_REPAIRABLE:
+			dev_info(&flctl->pdev->dev,
+				"applied ecc on page 0x%x", page_addr);
+			flctl->mtd.ecc_stats.corrected++;
+			break;
+		case FL_ERROR:
+			dev_warn(&flctl->pdev->dev,
+				"page 0x%x contains corrupted data\n",
+				page_addr);
+			flctl->mtd.ecc_stats.failed++;
+			break;
+		default:
+			;
+		}
 	}
+
+	wait_completion(flctl);
+
 	writel(readl(FLCMNCR(flctl)) & ~(ACM_SACCES_MODE | _4ECCCORRECT),
 			FLCMNCR(flctl));
 }
@@ -417,30 +630,20 @@ static void execmd_read_page_sector(struct mtd_info *mtd, int page_addr)
 static void execmd_read_oob(struct mtd_info *mtd, int page_addr)
 {
 	struct sh_flctl *flctl = mtd_to_flctl(mtd);
+	int page_sectors = flctl->page_size ? 4 : 1;
+	int i;
 
 	set_cmd_regs(mtd, NAND_CMD_READ0,
 		(NAND_CMD_READSTART << 8) | NAND_CMD_READ0);
 
 	empty_fifo(flctl);
-	if (flctl->page_size) {
-		int i;
-		/* In case that the page size is 2k */
-		for (i = 0; i < 16 * 3; i++)
-			flctl->done_buff[i] = 0xFF;
 
-		set_addr(mtd, 3 * 528 + 512, page_addr);
+	for (i = 0; i < page_sectors; i++) {
+		set_addr(mtd, (512 + 16) * i + 512 , page_addr);
 		writel(16, FLDTCNTR(flctl));
 
 		start_translation(flctl);
-		read_fiforeg(flctl, 16, 16 * 3);
-		wait_completion(flctl);
-	} else {
-		/* In case that the page size is 512b */
-		set_addr(mtd, 512, page_addr);
-		writel(16, FLDTCNTR(flctl));
-
-		start_translation(flctl);
-		read_fiforeg(flctl, 16, 0);
+		read_fiforeg(flctl, 16, 16 * i);
 		wait_completion(flctl);
 	}
 }
@@ -448,34 +651,26 @@ static void execmd_read_oob(struct mtd_info *mtd, int page_addr)
 static void execmd_write_page_sector(struct mtd_info *mtd)
 {
 	struct sh_flctl *flctl = mtd_to_flctl(mtd);
-	int i, page_addr = flctl->seqin_page_addr;
+	int page_addr = flctl->seqin_page_addr;
 	int sector, page_sectors;
 
-	if (flctl->page_size)
-		page_sectors = 4;
-	else
-		page_sectors = 1;
-
-	writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE, FLCMNCR(flctl));
+	page_sectors = flctl->page_size ? 4 : 1;
 
 	set_cmd_regs(mtd, NAND_CMD_PAGEPROG,
 			(NAND_CMD_PAGEPROG << 8) | NAND_CMD_SEQIN);
 
-	for (sector = 0; sector < page_sectors; sector++) {
-		empty_fifo(flctl);
-		writel(readl(FLCMDCR(flctl)) | 1, FLCMDCR(flctl));
-		writel(page_addr << 2 | sector, FLADR(flctl));
+	empty_fifo(flctl);
+	writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE, FLCMNCR(flctl));
+	writel(readl(FLCMDCR(flctl)) | page_sectors, FLCMDCR(flctl));
+	writel(page_addr << 2, FLADR(flctl));
+	start_translation(flctl);
 
-		start_translation(flctl);
+	for (sector = 0; sector < page_sectors; sector++) {
 		write_fiforeg(flctl, 512, 512 * sector);
-
-		for (i = 0; i < 4; i++) {
-			wait_wecfifo_ready(flctl); /* wait for write ready */
-			writel(0xFFFFFFFF, FLECFIFO(flctl));
-		}
-		wait_completion(flctl);
+		write_ec_fiforeg(flctl, 16, mtd->writesize + 16 * sector);
 	}
 
+	wait_completion(flctl);
 	writel(readl(FLCMNCR(flctl)) & ~ACM_SACCES_MODE, FLCMNCR(flctl));
 }
 
@@ -485,18 +680,12 @@ static void execmd_write_oob(struct mtd_info *mtd)
 	int page_addr = flctl->seqin_page_addr;
 	int sector, page_sectors;
 
-	if (flctl->page_size) {
-		sector = 3;
-		page_sectors = 4;
-	} else {
-		sector = 0;
-		page_sectors = 1;
-	}
+	page_sectors = flctl->page_size ? 4 : 1;
 
 	set_cmd_regs(mtd, NAND_CMD_PAGEPROG,
 			(NAND_CMD_PAGEPROG << 8) | NAND_CMD_SEQIN);
 
-	for (; sector < page_sectors; sector++) {
+	for (sector = 0; sector < page_sectors; sector++) {
 		empty_fifo(flctl);
 		set_addr(mtd, sector * 528 + 512, page_addr);
 		writel(16, FLDTCNTR(flctl));	/* set read size */
@@ -513,6 +702,8 @@ static void flctl_cmdfunc(struct mtd_info *mtd, unsigned int command,
 	struct sh_flctl *flctl = mtd_to_flctl(mtd);
 	uint32_t read_cmd = 0;
 
+	pm_runtime_get_sync(&flctl->pdev->dev);
+
 	flctl->read_bytes = 0;
 	if (command != NAND_CMD_PAGEPROG)
 		flctl->index = 0;
@@ -525,7 +716,6 @@ static void flctl_cmdfunc(struct mtd_info *mtd, unsigned int command,
 			execmd_read_page_sector(mtd, page_addr);
 			break;
 		}
-		empty_fifo(flctl);
 		if (flctl->page_size)
 			set_cmd_regs(mtd, command, (NAND_CMD_READSTART << 8)
 				| command);
@@ -547,7 +737,6 @@ static void flctl_cmdfunc(struct mtd_info *mtd, unsigned int command,
 			break;
 		}
 
-		empty_fifo(flctl);
 		if (flctl->page_size) {
 			set_cmd_regs(mtd, command, (NAND_CMD_READSTART << 8)
 				| NAND_CMD_READ0);
@@ -559,15 +748,35 @@ static void flctl_cmdfunc(struct mtd_info *mtd, unsigned int command,
 		flctl->read_bytes = mtd->oobsize;
 		goto read_normal_exit;
 
+	case NAND_CMD_RNDOUT:
+		if (flctl->hwecc)
+			break;
+
+		if (flctl->page_size)
+			set_cmd_regs(mtd, command, (NAND_CMD_RNDOUTSTART << 8)
+				| command);
+		else
+			set_cmd_regs(mtd, command, command);
+
+		set_addr(mtd, column, 0);
+
+		flctl->read_bytes = mtd->writesize + mtd->oobsize - column;
+		goto read_normal_exit;
+
 	case NAND_CMD_READID:
-		empty_fifo(flctl);
 		set_cmd_regs(mtd, command, command);
-		set_addr(mtd, 0, 0);
 
-		flctl->read_bytes = 4;
+		/* READID is always performed using an 8-bit bus */
+		if (flctl->chip.options & NAND_BUSWIDTH_16)
+			column <<= 1;
+		set_addr(mtd, column, 0);
+
+		flctl->read_bytes = 8;
 		writel(flctl->read_bytes, FLDTCNTR(flctl)); /* set read size */
+		empty_fifo(flctl);
 		start_translation(flctl);
-		read_datareg(flctl, 0);	/* read and end */
+		read_fiforeg(flctl, flctl->read_bytes, 0);
+		wait_completion(flctl);
 		break;
 
 	case NAND_CMD_ERASE1:
@@ -650,29 +859,57 @@ static void flctl_cmdfunc(struct mtd_info *mtd, unsigned int command,
 	default:
 		break;
 	}
-	return;
+	goto runtime_exit;
 
 read_normal_exit:
 	writel(flctl->read_bytes, FLDTCNTR(flctl));	/* set read size */
+	empty_fifo(flctl);
 	start_translation(flctl);
 	read_fiforeg(flctl, flctl->read_bytes, 0);
 	wait_completion(flctl);
+runtime_exit:
+	pm_runtime_put_sync(&flctl->pdev->dev);
 	return;
 }
 
 static void flctl_select_chip(struct mtd_info *mtd, int chipnr)
 {
 	struct sh_flctl *flctl = mtd_to_flctl(mtd);
-	uint32_t flcmncr_val = readl(FLCMNCR(flctl));
+	int ret;
 
 	switch (chipnr) {
 	case -1:
-		flcmncr_val &= ~CE0_ENABLE;
-		writel(flcmncr_val, FLCMNCR(flctl));
+		flctl->flcmncr_base &= ~CE0_ENABLE;
+
+		pm_runtime_get_sync(&flctl->pdev->dev);
+		writel(flctl->flcmncr_base, FLCMNCR(flctl));
+
+		if (flctl->qos_request) {
+			dev_pm_qos_remove_request(&flctl->pm_qos);
+			flctl->qos_request = 0;
+		}
+
+		pm_runtime_put_sync(&flctl->pdev->dev);
 		break;
 	case 0:
-		flcmncr_val |= CE0_ENABLE;
-		writel(flcmncr_val, FLCMNCR(flctl));
+		flctl->flcmncr_base |= CE0_ENABLE;
+
+		if (!flctl->qos_request) {
+			ret = dev_pm_qos_add_request(&flctl->pdev->dev,
+							&flctl->pm_qos,
+							DEV_PM_QOS_RESUME_LATENCY,
+							100);
+			if (ret < 0)
+				dev_err(&flctl->pdev->dev,
+					"PM QoS request failed: %d\n", ret);
+			flctl->qos_request = 1;
+		}
+
+		if (flctl->holden) {
+			pm_runtime_get_sync(&flctl->pdev->dev);
+			writel(HOLDEN, FLHOLDCR(flctl));
+			pm_runtime_put_sync(&flctl->pdev->dev);
+		}
 		break;
 	default:
 		BUG();
@@ -682,57 +919,36 @@ static void flctl_select_chip(struct mtd_info *mtd, int chipnr)
 static void flctl_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
 {
 	struct sh_flctl *flctl = mtd_to_flctl(mtd);
-	int i, index = flctl->index;
 
-	for (i = 0; i < len; i++)
-		flctl->done_buff[index + i] = buf[i];
+	memcpy(&flctl->done_buff[flctl->index], buf, len);
 	flctl->index += len;
 }
 
 static uint8_t flctl_read_byte(struct mtd_info *mtd)
 {
 	struct sh_flctl *flctl = mtd_to_flctl(mtd);
-	int index = flctl->index;
 	uint8_t data;
 
-	data = flctl->done_buff[index];
+	data = flctl->done_buff[flctl->index];
 	flctl->index++;
 	return data;
 }
 
 static uint16_t flctl_read_word(struct mtd_info *mtd)
 {
-       struct sh_flctl *flctl = mtd_to_flctl(mtd);
-       int index = flctl->index;
-       uint16_t data;
-       uint16_t *buf = (uint16_t *)&flctl->done_buff[index];
+	struct sh_flctl *flctl = mtd_to_flctl(mtd);
+	uint16_t *buf = (uint16_t *)&flctl->done_buff[flctl->index];
 
-       data = *buf;
-       flctl->index += 2;
-       return data;
+	flctl->index += 2;
+	return *buf;
 }
 
 static void flctl_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
 {
-	int i;
-
-	for (i = 0; i < len; i++)
-		buf[i] = flctl_read_byte(mtd);
-}
-
-static int flctl_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
-{
-	int i;
-
-	for (i = 0; i < len; i++)
-		if (buf[i] != flctl_read_byte(mtd))
-			return -EFAULT;
-	return 0;
-}
+	struct sh_flctl *flctl = mtd_to_flctl(mtd);
 
-static void flctl_register_init(struct sh_flctl *flctl, unsigned long val)
-{
-	writel(val, FLCMNCR(flctl));
+	memcpy(buf, &flctl->done_buff[flctl->index], len);
+	flctl->index += len;
 }
 
 static int flctl_chip_init_tail(struct mtd_info *mtd)
@@ -781,13 +997,13 @@ static int flctl_chip_init_tail(struct mtd_info *mtd)
 
 		chip->ecc.size = 512;
 		chip->ecc.bytes = 10;
+		chip->ecc.strength = 4;
 		chip->ecc.read_page = flctl_read_page_hwecc;
 		chip->ecc.write_page = flctl_write_page_hwecc;
 		chip->ecc.mode = NAND_ECC_HW;
 
 		/* 4 symbols ECC enabled */
-		writel(readl(FLCMNCR(flctl)) | _4ECCEN | ECCPOS2 | ECCPOS_02,
-				FLCMNCR(flctl));
+		flctl->flcmncr_base |= _4ECCEN;
 	} else {
 		chip->ecc.mode = NAND_ECC_SOFT;
 	}
@@ -795,37 +1011,114 @@ static int flctl_chip_init_tail(struct mtd_info *mtd)
 	return 0;
 }
 
-static int __devinit flctl_probe(struct platform_device *pdev)
+static irqreturn_t flctl_handle_flste(int irq, void *dev_id)
+{
+	struct sh_flctl *flctl = dev_id;
+
+	dev_err(&flctl->pdev->dev, "flste irq: %x\n", readl(FLINTDMACR(flctl)));
+	writel(flctl->flintdmacr_base, FLINTDMACR(flctl));
+
+	return IRQ_HANDLED;
+}
+
+struct flctl_soc_config {
+	unsigned long flcmncr_val;
+	unsigned has_hwecc:1;
+	unsigned use_holden:1;
+};
+
+static struct flctl_soc_config flctl_sh7372_config = {
+	.flcmncr_val = CLK_16B_12L_4H | TYPESEL_SET | SHBUSSEL,
+	.has_hwecc = 1,
+	.use_holden = 1,
+};
+
+static const struct of_device_id of_flctl_match[] = {
+	{ .compatible = "renesas,shmobile-flctl-sh7372",
+				.data = &flctl_sh7372_config },
+	{},
+};
+MODULE_DEVICE_TABLE(of, of_flctl_match);
+
+static struct sh_flctl_platform_data *flctl_parse_dt(struct device *dev)
+{
+	const struct of_device_id *match;
+	struct flctl_soc_config *config;
+	struct sh_flctl_platform_data *pdata;
+	struct device_node *dn = dev->of_node;
+	int ret;
+
+	match = of_match_device(of_flctl_match, dev);
+	if (match)
+		config = (struct flctl_soc_config *)match->data;
+	else {
+		dev_err(dev, "%s: no OF configuration attached\n", __func__);
+		return NULL;
+	}
+
+	pdata = devm_kzalloc(dev, sizeof(struct sh_flctl_platform_data),
+								GFP_KERNEL);
+	if (!pdata)
+		return NULL;
+
+	/* set SoC specific options */
+	pdata->flcmncr_val = config->flcmncr_val;
+	pdata->has_hwecc = config->has_hwecc;
+	pdata->use_holden = config->use_holden;
+
+	/* parse user defined options */
+	ret = of_get_nand_bus_width(dn);
+	if (ret == 16)
+		pdata->flcmncr_val |= SEL_16BIT;
+	else if (ret != 8) {
+		dev_err(dev, "%s: invalid bus width\n", __func__);
+		return NULL;
+	}
+
+	return pdata;
+}
+
+static int flctl_probe(struct platform_device *pdev)
 {
 	struct resource *res;
 	struct sh_flctl *flctl;
 	struct mtd_info *flctl_mtd;
 	struct nand_chip *nand;
 	struct sh_flctl_platform_data *pdata;
-	int ret = -ENXIO;
+	int ret;
+	int irq;
+	struct mtd_part_parser_data ppdata = {};
 
-	pdata = pdev->dev.platform_data;
-	if (pdata == NULL) {
-		dev_err(&pdev->dev, "no platform data defined\n");
-		return -EINVAL;
-	}
-
-	flctl = kzalloc(sizeof(struct sh_flctl), GFP_KERNEL);
-	if (!flctl) {
-		dev_err(&pdev->dev, "failed to allocate driver data\n");
+	flctl = devm_kzalloc(&pdev->dev, sizeof(struct sh_flctl), GFP_KERNEL);
+	if (!flctl)
 		return -ENOMEM;
-	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "failed to get I/O memory\n");
-		goto err;
+	flctl->reg = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(flctl->reg))
+		return PTR_ERR(flctl->reg);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "failed to get flste irq data\n");
+		return -ENXIO;
 	}
 
-	flctl->reg = ioremap(res->start, resource_size(res));
-	if (flctl->reg == NULL) {
-		dev_err(&pdev->dev, "failed to remap I/O memory\n");
-		goto err;
+	ret = devm_request_irq(&pdev->dev, irq, flctl_handle_flste, IRQF_SHARED,
+			       "flste", flctl);
+	if (ret) {
+		dev_err(&pdev->dev, "request interrupt failed.\n");
+		return ret;
+	}
+
+	if (pdev->dev.of_node)
+		pdata = flctl_parse_dt(&pdev->dev);
+	else
+		pdata = dev_get_platdata(&pdev->dev);
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "no setup data defined\n");
+		return -EINVAL;
 	}
 
 	platform_set_drvdata(pdev, flctl);
@@ -834,10 +1127,9 @@ static int __devinit flctl_probe(struct platform_device *pdev)
 	flctl_mtd->priv = nand;
 	flctl->pdev = pdev;
 	flctl->hwecc = pdata->has_hwecc;
-
-	flctl_register_init(flctl, pdata->flcmncr_val);
-
-	nand->options = NAND_NO_AUTOINCR;
+	flctl->holden = pdata->use_holden;
+	flctl->flcmncr_base = pdata->flcmncr_val;
+	flctl->flintdmacr_base = flctl->hwecc ? (STERINTE | ECERB) : STERINTE;
 
 	/* Set address of hardware control function */
 	/* 20 us command delay time */
@@ -846,7 +1138,6 @@ static int __devinit flctl_probe(struct platform_device *pdev)
 	nand->read_byte = flctl_read_byte;
 	nand->write_buf = flctl_write_buf;
 	nand->read_buf = flctl_read_buf;
-	nand->verify_buf = flctl_verify_buf;
 	nand->select_chip = flctl_select_chip;
 	nand->cmdfunc = flctl_cmdfunc;
 
@@ -855,33 +1146,42 @@ static int __devinit flctl_probe(struct platform_device *pdev)
 		nand->read_word = flctl_read_word;
 	}
 
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_resume(&pdev->dev);
+
+	flctl_setup_dma(flctl);
+
 	ret = nand_scan_ident(flctl_mtd, 1, NULL);
 	if (ret)
-		goto err;
+		goto err_chip;
 
 	ret = flctl_chip_init_tail(flctl_mtd);
 	if (ret)
-		goto err;
+		goto err_chip;
 
 	ret = nand_scan_tail(flctl_mtd);
 	if (ret)
-		goto err;
+		goto err_chip;
 
-	add_mtd_partitions(flctl_mtd, pdata->parts, pdata->nr_parts);
+	ppdata.of_node = pdev->dev.of_node;
+	ret = mtd_device_parse_register(flctl_mtd, NULL, &ppdata, pdata->parts,
+			pdata->nr_parts);
 
 	return 0;
 
-err:
-	kfree(flctl);
+err_chip:
+	flctl_release_dma(flctl);
+	pm_runtime_disable(&pdev->dev);
 	return ret;
 }
 
-static int __devexit flctl_remove(struct platform_device *pdev)
+static int flctl_remove(struct platform_device *pdev)
 {
 	struct sh_flctl *flctl = platform_get_drvdata(pdev);
 
+	flctl_release_dma(flctl);
 	nand_release(&flctl->mtd);
-	kfree(flctl);
+	pm_runtime_disable(&pdev->dev);
 
 	return 0;
 }
@@ -891,21 +1191,11 @@ static struct platform_driver flctl_driver = {
 	.driver = {
 		.name	= "sh_flctl",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(of_flctl_match),
 	},
 };
 
-static int __init flctl_nand_init(void)
-{
-	return platform_driver_probe(&flctl_driver, flctl_probe);
-}
-
-static void __exit flctl_nand_cleanup(void)
-{
-	platform_driver_unregister(&flctl_driver);
-}
-
-module_init(flctl_nand_init);
-module_exit(flctl_nand_cleanup);
+module_platform_driver_probe(flctl_driver, flctl_probe);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Yoshihiro Shimoda");
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index 54ec7542a7b..e81059b5838 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -103,24 +103,16 @@ static int sharpsl_nand_calculate_ecc(struct mtd_info *mtd, const u_char * dat,
 	return readb(sharpsl->io + ECCCNTR) != 0;
 }
 
-#ifdef CONFIG_MTD_PARTITIONS
-static const char *part_probes[] = { "cmdlinepart", NULL };
-#endif
-
 /*
  * Main initialization routine
  */
-static int __devinit sharpsl_nand_probe(struct platform_device *pdev)
+static int sharpsl_nand_probe(struct platform_device *pdev)
 {
 	struct nand_chip *this;
-#ifdef CONFIG_MTD_PARTITIONS
-	struct mtd_partition *sharpsl_partition_info;
-	int nr_partitions;
-#endif
 	struct resource *r;
 	int err = 0;
 	struct sharpsl_nand *sharpsl;
-	struct sharpsl_nand_platform_data *data = pdev->dev.platform_data;
+	struct sharpsl_nand_platform_data *data = dev_get_platdata(&pdev->dev);
 
 	if (!data) {
 		dev_err(&pdev->dev, "no platform data!\n");
@@ -129,10 +121,8 @@ static int __devinit sharpsl_nand_probe(struct platform_device *pdev)
 
 	/* Allocate memory for MTD device structure and private data */
 	sharpsl = kzalloc(sizeof(struct sharpsl_nand), GFP_KERNEL);
-	if (!sharpsl) {
-		printk("Unable to allocate SharpSL NAND MTD device structure.\n");
+	if (!sharpsl)
 		return -ENOMEM;
-	}
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!r) {
@@ -144,7 +134,7 @@ static int __devinit sharpsl_nand_probe(struct platform_device *pdev)
 	/* map physical address */
 	sharpsl->io = ioremap(r->start, resource_size(r));
 	if (!sharpsl->io) {
-		printk("ioremap to access Sharp SL NAND chip failed\n");
+		dev_err(&pdev->dev, "ioremap to access Sharp SL NAND chip failed\n");
 		err = -EIO;
 		goto err_ioremap;
 	}
@@ -175,6 +165,7 @@ static int __devinit sharpsl_nand_probe(struct platform_device *pdev)
 	this->ecc.mode = NAND_ECC_HW;
 	this->ecc.size = 256;
 	this->ecc.bytes = 3;
+	this->ecc.strength = 1;
 	this->badblock_pattern = data->badblock_pattern;
 	this->ecc.layout = data->ecc_layout;
 	this->ecc.hwctl = sharpsl_nand_enable_hwecc;
@@ -188,18 +179,9 @@ static int __devinit sharpsl_nand_probe(struct platform_device *pdev)
 
 	/* Register the partitions */
 	sharpsl->mtd.name = "sharpsl-nand";
-#ifdef CONFIG_MTD_PARTITIONS
-	nr_partitions = parse_mtd_partitions(&sharpsl->mtd, part_probes, &sharpsl_partition_info, 0);
-	if (nr_partitions <= 0) {
-		nr_partitions = data->nr_partitions;
-		sharpsl_partition_info = data->partitions;
-	}
 
-	if (nr_partitions > 0)
-		err = add_mtd_partitions(&sharpsl->mtd, sharpsl_partition_info, nr_partitions);
-	else
-#endif
-	err = add_mtd_device(&sharpsl->mtd);
+	err = mtd_device_parse_register(&sharpsl->mtd, NULL, NULL,
+					data->partitions, data->nr_partitions);
 	if (err)
 		goto err_add;
 
@@ -210,7 +192,6 @@ err_add:
 	nand_release(&sharpsl->mtd);
 
 err_scan:
-	platform_set_drvdata(pdev, NULL);
 	iounmap(sharpsl->io);
 err_ioremap:
 err_get_res:
@@ -221,15 +202,13 @@ err_get_res:
 /*
  * Clean up routine
  */
-static int __devexit sharpsl_nand_remove(struct platform_device *pdev)
+static int sharpsl_nand_remove(struct platform_device *pdev)
 {
 	struct sharpsl_nand *sharpsl = platform_get_drvdata(pdev);
 
 	/* Release resources, unregister device */
 	nand_release(&sharpsl->mtd);
 
-	platform_set_drvdata(pdev, NULL);
-
 	iounmap(sharpsl->io);
 
 	/* Free the MTD device structure */
@@ -244,20 +223,10 @@ static struct platform_driver sharpsl_nand_driver = {
 		.owner	= THIS_MODULE,
 	},
 	.probe		= sharpsl_nand_probe,
-	.remove		= __devexit_p(sharpsl_nand_remove),
+	.remove		= sharpsl_nand_remove,
 };
 
-static int __init sharpsl_nand_init(void)
-{
-	return platform_driver_register(&sharpsl_nand_driver);
-}
-module_init(sharpsl_nand_init);
-
-static void __exit sharpsl_nand_exit(void)
-{
-	platform_driver_unregister(&sharpsl_nand_driver);
-}
-module_exit(sharpsl_nand_exit);
+module_platform_driver(sharpsl_nand_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
diff --git a/drivers/mtd/nand/sm_common.c b/drivers/mtd/nand/sm_common.c
index ac80fb362e6..e06b5e5d328 100644
--- a/drivers/mtd/nand/sm_common.c
+++ b/drivers/mtd/nand/sm_common.c
@@ -8,6 +8,8 @@
  */
 #include <linux/kernel.h>
 #include <linux/mtd/nand.h>
+#include <linux/module.h>
+#include <linux/sizes.h>
 #include "sm_common.h"
 
 static struct nand_ecclayout nand_oob_sm = {
@@ -40,76 +42,67 @@ static int sm_block_markbad(struct mtd_info *mtd, loff_t ofs)
 {
 	struct mtd_oob_ops ops;
 	struct sm_oob oob;
-	int ret, error = 0;
+	int ret;
 
 	memset(&oob, -1, SM_OOB_SIZE);
 	oob.block_status = 0x0F;
 
 	/* As long as this function is called on erase block boundaries
 		it will work correctly for 256 byte nand */
-	ops.mode = MTD_OOB_PLACE;
+	ops.mode = MTD_OPS_PLACE_OOB;
 	ops.ooboffs = 0;
 	ops.ooblen = mtd->oobsize;
 	ops.oobbuf = (void *)&oob;
 	ops.datbuf = NULL;
 
 
-	ret = mtd->write_oob(mtd, ofs, &ops);
+	ret = mtd_write_oob(mtd, ofs, &ops);
 	if (ret < 0 || ops.oobretlen != SM_OOB_SIZE) {
 		printk(KERN_NOTICE
 			"sm_common: can't mark sector at %i as bad\n",
 								(int)ofs);
-		error = -EIO;
-	} else
-		mtd->ecc_stats.badblocks++;
+		return -EIO;
+	}
 
-	return error;
+	return 0;
 }
 
-
 static struct nand_flash_dev nand_smartmedia_flash_ids[] = {
-	{"SmartMedia 1MiB 5V",          0x6e, 256, 1, 0x1000, 0},
-	{"SmartMedia 1MiB 3,3V",        0xe8, 256, 1, 0x1000, 0},
-	{"SmartMedia 1MiB 3,3V",        0xec, 256, 1, 0x1000, 0},
-	{"SmartMedia 2MiB 3,3V",        0xea, 256, 2, 0x1000, 0},
-	{"SmartMedia 2MiB 5V",          0x64, 256, 2, 0x1000, 0},
-	{"SmartMedia 2MiB 3,3V ROM",    0x5d, 512, 2, 0x2000, NAND_ROM},
-	{"SmartMedia 4MiB 3,3V",        0xe3, 512, 4, 0x2000, 0},
-	{"SmartMedia 4MiB 3,3/5V",      0xe5, 512, 4, 0x2000, 0},
-	{"SmartMedia 4MiB 5V",          0x6b, 512, 4, 0x2000, 0},
-	{"SmartMedia 4MiB 3,3V ROM",    0xd5, 512, 4, 0x2000, NAND_ROM},
-	{"SmartMedia 8MiB 3,3V",        0xe6, 512, 8, 0x2000, 0},
-	{"SmartMedia 8MiB 3,3V ROM",    0xd6, 512, 8, 0x2000, NAND_ROM},
-	{"SmartMedia 16MiB 3,3V",       0x73, 512, 16, 0x4000, 0},
-	{"SmartMedia 16MiB 3,3V ROM",   0x57, 512, 16, 0x4000, NAND_ROM},
-	{"SmartMedia 32MiB 3,3V",       0x75, 512, 32, 0x4000, 0},
-	{"SmartMedia 32MiB 3,3V ROM",   0x58, 512, 32, 0x4000, NAND_ROM},
-	{"SmartMedia 64MiB 3,3V",       0x76, 512, 64, 0x4000, 0},
-	{"SmartMedia 64MiB 3,3V ROM",   0xd9, 512, 64, 0x4000, NAND_ROM},
-	{"SmartMedia 128MiB 3,3V",      0x79, 512, 128, 0x4000, 0},
-	{"SmartMedia 128MiB 3,3V ROM",  0xda, 512, 128, 0x4000, NAND_ROM},
-	{"SmartMedia 256MiB 3,3V",      0x71, 512, 256, 0x4000 },
-	{"SmartMedia 256MiB 3,3V ROM",  0x5b, 512, 256, 0x4000, NAND_ROM},
-	{NULL,}
+	LEGACY_ID_NAND("SmartMedia 2MiB 3,3V ROM",   0x5d, 2,   SZ_8K, NAND_ROM),
+	LEGACY_ID_NAND("SmartMedia 4MiB 3,3V",       0xe3, 4,   SZ_8K, 0),
+	LEGACY_ID_NAND("SmartMedia 4MiB 3,3/5V",     0xe5, 4,   SZ_8K, 0),
+	LEGACY_ID_NAND("SmartMedia 4MiB 5V",         0x6b, 4,   SZ_8K, 0),
+	LEGACY_ID_NAND("SmartMedia 4MiB 3,3V ROM",   0xd5, 4,   SZ_8K, NAND_ROM),
+	LEGACY_ID_NAND("SmartMedia 8MiB 3,3V",       0xe6, 8,   SZ_8K, 0),
+	LEGACY_ID_NAND("SmartMedia 8MiB 3,3V ROM",   0xd6, 8,   SZ_8K, NAND_ROM),
+	LEGACY_ID_NAND("SmartMedia 16MiB 3,3V",      0x73, 16,  SZ_16K, 0),
+	LEGACY_ID_NAND("SmartMedia 16MiB 3,3V ROM",  0x57, 16,  SZ_16K, NAND_ROM),
+	LEGACY_ID_NAND("SmartMedia 32MiB 3,3V",      0x75, 32,  SZ_16K, 0),
+	LEGACY_ID_NAND("SmartMedia 32MiB 3,3V ROM",  0x58, 32,  SZ_16K, NAND_ROM),
+	LEGACY_ID_NAND("SmartMedia 64MiB 3,3V",      0x76, 64,  SZ_16K, 0),
+	LEGACY_ID_NAND("SmartMedia 64MiB 3,3V ROM",  0xd9, 64,  SZ_16K, NAND_ROM),
+	LEGACY_ID_NAND("SmartMedia 128MiB 3,3V",     0x79, 128, SZ_16K, 0),
+	LEGACY_ID_NAND("SmartMedia 128MiB 3,3V ROM", 0xda, 128, SZ_16K, NAND_ROM),
+	LEGACY_ID_NAND("SmartMedia 256MiB 3, 3V",    0x71, 256, SZ_16K, 0),
+	LEGACY_ID_NAND("SmartMedia 256MiB 3,3V ROM", 0x5b, 256, SZ_16K, NAND_ROM),
+	{NULL}
 };
 
-#define XD_TYPEM       (NAND_NO_AUTOINCR | NAND_BROKEN_XD)
 static struct nand_flash_dev nand_xd_flash_ids[] = {
-
-	{"xD 16MiB 3,3V",    0x73, 512, 16, 0x4000, 0},
-	{"xD 32MiB 3,3V",    0x75, 512, 32, 0x4000, 0},
-	{"xD 64MiB 3,3V",    0x76, 512, 64, 0x4000, 0},
-	{"xD 128MiB 3,3V",   0x79, 512, 128, 0x4000, 0},
-	{"xD 256MiB 3,3V",   0x71, 512, 256, 0x4000, XD_TYPEM},
-	{"xD 512MiB 3,3V",   0xdc, 512, 512, 0x4000, XD_TYPEM},
-	{"xD 1GiB 3,3V",     0xd3, 512, 1024, 0x4000, XD_TYPEM},
-	{"xD 2GiB 3,3V",     0xd5, 512, 2048, 0x4000, XD_TYPEM},
-	{NULL,}
+	LEGACY_ID_NAND("xD 16MiB 3,3V",  0x73, 16,   SZ_16K, 0),
+	LEGACY_ID_NAND("xD 32MiB 3,3V",  0x75, 32,   SZ_16K, 0),
+	LEGACY_ID_NAND("xD 64MiB 3,3V",  0x76, 64,   SZ_16K, 0),
+	LEGACY_ID_NAND("xD 128MiB 3,3V", 0x79, 128,  SZ_16K, 0),
+	LEGACY_ID_NAND("xD 256MiB 3,3V", 0x71, 256,  SZ_16K, NAND_BROKEN_XD),
+	LEGACY_ID_NAND("xD 512MiB 3,3V", 0xdc, 512,  SZ_16K, NAND_BROKEN_XD),
+	LEGACY_ID_NAND("xD 1GiB 3,3V",   0xd3, 1024, SZ_16K, NAND_BROKEN_XD),
+	LEGACY_ID_NAND("xD 2GiB 3,3V",   0xd5, 2048, SZ_16K, NAND_BROKEN_XD),
+	{NULL}
 };
 
 int sm_register_device(struct mtd_info *mtd, int smartmedia)
 {
-	struct nand_chip *chip = (struct nand_chip *)mtd->priv;
+	struct nand_chip *chip = mtd->priv;
 	int ret;
 
 	chip->options |= NAND_SKIP_BBTSCAN;
@@ -121,7 +114,7 @@ int sm_register_device(struct mtd_info *mtd, int smartmedia)
 	if (ret)
 		return ret;
 
-	/* Bad block marker postion */
+	/* Bad block marker position */
 	chip->badblockpos = 0x05;
 	chip->badblockbits = 7;
 	chip->block_markbad = sm_block_markbad;
@@ -139,7 +132,7 @@ int sm_register_device(struct mtd_info *mtd, int smartmedia)
 	if (ret)
 		return ret;
 
-	return add_mtd_device(mtd);
+	return mtd_device_register(mtd, NULL, 0);
 }
 EXPORT_SYMBOL_GPL(sm_register_device);
 
diff --git a/drivers/mtd/nand/socrates_nand.c b/drivers/mtd/nand/socrates_nand.c
index cc728b12de8..fe8058a4505 100644
--- a/drivers/mtd/nand/socrates_nand.c
+++ b/drivers/mtd/nand/socrates_nand.c
@@ -15,6 +15,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/io.h>
 
@@ -98,24 +99,6 @@ static uint16_t socrates_nand_read_word(struct mtd_info *mtd)
 	return word;
 }
 
-/**
- * socrates_nand_verify_buf -  Verify chip data against buffer
- * @mtd:	MTD device structure
- * @buf:	buffer containing the data to compare
- * @len:	number of bytes to compare
- */
-static int socrates_nand_verify_buf(struct mtd_info *mtd, const u8 *buf,
-		int len)
-{
-	int i;
-
-	for (i = 0; i < len; i++) {
-		if (buf[i] != socrates_nand_read_byte(mtd))
-			return -EFAULT;
-	}
-	return 0;
-}
-
 /*
  * Hardware specific access to control-lines
  */
@@ -155,38 +138,25 @@ static int socrates_nand_device_ready(struct mtd_info *mtd)
 	return 1;
 }
 
-#ifdef CONFIG_MTD_PARTITIONS
-static const char *part_probes[] = { "cmdlinepart", NULL };
-#endif
-
 /*
  * Probe for the NAND device.
  */
-static int __devinit socrates_nand_probe(struct of_device *ofdev,
-					 const struct of_device_id *ofid)
+static int socrates_nand_probe(struct platform_device *ofdev)
 {
 	struct socrates_nand_host *host;
 	struct mtd_info *mtd;
 	struct nand_chip *nand_chip;
 	int res;
-
-#ifdef CONFIG_MTD_PARTITIONS
-	struct mtd_partition *partitions = NULL;
-	int num_partitions = 0;
-#endif
+	struct mtd_part_parser_data ppdata;
 
 	/* Allocate memory for the device structure (and zero it) */
-	host = kzalloc(sizeof(struct socrates_nand_host), GFP_KERNEL);
-	if (!host) {
-		printk(KERN_ERR
-		       "socrates_nand: failed to allocate device structure.\n");
+	host = devm_kzalloc(&ofdev->dev, sizeof(*host), GFP_KERNEL);
+	if (!host)
 		return -ENOMEM;
-	}
 
 	host->io_base = of_iomap(ofdev->dev.of_node, 0);
 	if (host->io_base == NULL) {
-		printk(KERN_ERR "socrates_nand: ioremap failed\n");
-		kfree(host);
+		dev_err(&ofdev->dev, "ioremap failed\n");
 		return -EIO;
 	}
 
@@ -199,6 +169,7 @@ static int __devinit socrates_nand_probe(struct of_device *ofdev,
 	mtd->name = "socrates_nand";
 	mtd->owner = THIS_MODULE;
 	mtd->dev.parent = &ofdev->dev;
+	ppdata.of_node = ofdev->dev.of_node;
 
 	/*should never be accessed directly */
 	nand_chip->IO_ADDR_R = (void *)0xdeadbeef;
@@ -209,7 +180,6 @@ static int __devinit socrates_nand_probe(struct of_device *ofdev,
 	nand_chip->read_word = socrates_nand_read_word;
 	nand_chip->write_buf = socrates_nand_write_buf;
 	nand_chip->read_buf = socrates_nand_read_buf;
-	nand_chip->verify_buf = socrates_nand_verify_buf;
 	nand_chip->dev_ready = socrates_nand_device_ready;
 
 	nand_chip->ecc.mode = NAND_ECC_SOFT;	/* enable ECC */
@@ -231,61 +201,28 @@ static int __devinit socrates_nand_probe(struct of_device *ofdev,
 		goto out;
 	}
 
-#ifdef CONFIG_MTD_PARTITIONS
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-	num_partitions = parse_mtd_partitions(mtd, part_probes,
-					      &partitions, 0);
-	if (num_partitions < 0) {
-		res = num_partitions;
-		goto release;
-	}
-#endif
-
-#ifdef CONFIG_MTD_OF_PARTS
-	if (num_partitions == 0) {
-		num_partitions = of_mtd_parse_partitions(&ofdev->dev,
-							 ofdev->dev.of_node,
-							 &partitions);
-		if (num_partitions < 0) {
-			res = num_partitions;
-			goto release;
-		}
-	}
-#endif
-	if (partitions && (num_partitions > 0))
-		res = add_mtd_partitions(mtd, partitions, num_partitions);
-	else
-#endif
-		res = add_mtd_device(mtd);
-
+	res = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
 	if (!res)
 		return res;
 
-#ifdef CONFIG_MTD_PARTITIONS
-release:
-#endif
 	nand_release(mtd);
 
 out:
-	dev_set_drvdata(&ofdev->dev, NULL);
 	iounmap(host->io_base);
-	kfree(host);
 	return res;
 }
 
 /*
  * Remove a NAND device.
  */
-static int __devexit socrates_nand_remove(struct of_device *ofdev)
+static int socrates_nand_remove(struct platform_device *ofdev)
 {
 	struct socrates_nand_host *host = dev_get_drvdata(&ofdev->dev);
 	struct mtd_info *mtd = &host->mtd;
 
 	nand_release(mtd);
 
-	dev_set_drvdata(&ofdev->dev, NULL);
 	iounmap(host->io_base);
-	kfree(host);
 
 	return 0;
 }
@@ -300,28 +237,17 @@ static const struct of_device_id socrates_nand_match[] =
 
 MODULE_DEVICE_TABLE(of, socrates_nand_match);
 
-static struct of_platform_driver socrates_nand_driver = {
+static struct platform_driver socrates_nand_driver = {
 	.driver = {
 		.name = "socrates_nand",
 		.owner = THIS_MODULE,
 		.of_match_table = socrates_nand_match,
 	},
 	.probe		= socrates_nand_probe,
-	.remove		= __devexit_p(socrates_nand_remove),
+	.remove		= socrates_nand_remove,
 };
 
-static int __init socrates_nand_init(void)
-{
-	return of_register_platform_driver(&socrates_nand_driver);
-}
-
-static void __exit socrates_nand_exit(void)
-{
-	of_unregister_platform_driver(&socrates_nand_driver);
-}
-
-module_init(socrates_nand_init);
-module_exit(socrates_nand_exit);
+module_platform_driver(socrates_nand_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Ilya Yanok");
diff --git a/drivers/mtd/nand/spia.c b/drivers/mtd/nand/spia.c
deleted file mode 100644
index 0cc6d0acb8f..00000000000
--- a/drivers/mtd/nand/spia.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- *  drivers/mtd/nand/spia.c
- *
- *  Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
- *
- *
- *	10-29-2001 TG	change to support hardwarespecific access
- *			to controllines	(due to change in nand.c)
- *			page_cache added
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Overview:
- *   This is a device driver for the NAND flash device found on the
- *   SPIA board which utilizes the Toshiba TC58V64AFT part. This is
- *   a 64Mibit (8MiB x 8 bits) NAND flash device.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <asm/io.h>
-
-/*
- * MTD structure for SPIA board
- */
-static struct mtd_info *spia_mtd = NULL;
-
-/*
- * Values specific to the SPIA board (used with EP7212 processor)
- */
-#define SPIA_IO_BASE	0xd0000000	/* Start of EP7212 IO address space */
-#define SPIA_FIO_BASE	0xf0000000	/* Address where flash is mapped */
-#define SPIA_PEDR	0x0080	/*
-				 * IO offset to Port E data register
-				 * where the CLE, ALE and NCE pins
-				 * are wired to.
-				 */
-#define SPIA_PEDDR	0x00c0	/*
-				 * IO offset to Port E data direction
-				 * register so we can control the IO
-				 * lines.
-				 */
-
-/*
- * Module stuff
- */
-
-static int spia_io_base = SPIA_IO_BASE;
-static int spia_fio_base = SPIA_FIO_BASE;
-static int spia_pedr = SPIA_PEDR;
-static int spia_peddr = SPIA_PEDDR;
-
-module_param(spia_io_base, int, 0);
-module_param(spia_fio_base, int, 0);
-module_param(spia_pedr, int, 0);
-module_param(spia_peddr, int, 0);
-
-/*
- * Define partitions for flash device
- */
-static const struct mtd_partition partition_info[] = {
-	{
-	 .name = "SPIA flash partition 1",
-	 .offset = 0,
-	 .size = 2 * 1024 * 1024},
-	{
-	 .name = "SPIA flash partition 2",
-	 .offset = 2 * 1024 * 1024,
-	 .size = 6 * 1024 * 1024}
-};
-
-#define NUM_PARTITIONS 2
-
-/*
- *	hardware specific access to control-lines
- *
- *	ctrl:
- *	NAND_CNE: bit 0 -> bit 2
- *	NAND_CLE: bit 1 -> bit 0
- *	NAND_ALE: bit 2 -> bit 1
- */
-static void spia_hwcontrol(struct mtd_info *mtd, int cmd)
-{
-	struct nand_chip *chip = mtd->priv;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		void __iomem *addr = spia_io_base + spia_pedr;
-		unsigned char bits;
-
-		bits = (ctrl & NAND_CNE) << 2;
-		bits |= (ctrl & NAND_CLE | NAND_ALE) >> 1;
-		writeb((readb(addr) & ~0x7) | bits, addr);
-	}
-
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, chip->IO_ADDR_W);
-}
-
-/*
- * Main initialization routine
- */
-static int __init spia_init(void)
-{
-	struct nand_chip *this;
-
-	/* Allocate memory for MTD device structure and private data */
-	spia_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
-	if (!spia_mtd) {
-		printk("Unable to allocate SPIA NAND MTD device structure.\n");
-		return -ENOMEM;
-	}
-
-	/* Get pointer to private data */
-	this = (struct nand_chip *)(&spia_mtd[1]);
-
-	/* Initialize structures */
-	memset(spia_mtd, 0, sizeof(struct mtd_info));
-	memset(this, 0, sizeof(struct nand_chip));
-
-	/* Link the private data with the MTD structure */
-	spia_mtd->priv = this;
-	spia_mtd->owner = THIS_MODULE;
-
-	/*
-	 * Set GPIO Port E control register so that the pins are configured
-	 * to be outputs for controlling the NAND flash.
-	 */
-	(*(volatile unsigned char *)(spia_io_base + spia_peddr)) = 0x07;
-
-	/* Set address of NAND IO lines */
-	this->IO_ADDR_R = (void __iomem *)spia_fio_base;
-	this->IO_ADDR_W = (void __iomem *)spia_fio_base;
-	/* Set address of hardware control function */
-	this->cmd_ctrl = spia_hwcontrol;
-	/* 15 us command delay time */
-	this->chip_delay = 15;
-
-	/* Scan to find existence of the device */
-	if (nand_scan(spia_mtd, 1)) {
-		kfree(spia_mtd);
-		return -ENXIO;
-	}
-
-	/* Register the partitions */
-	add_mtd_partitions(spia_mtd, partition_info, NUM_PARTITIONS);
-
-	/* Return happy */
-	return 0;
-}
-
-module_init(spia_init);
-
-/*
- * Clean up routine
- */
-static void __exit spia_cleanup(void)
-{
-	/* Release resources, unregister device */
-	nand_release(spia_mtd);
-
-	/* Free the MTD device structure */
-	kfree(spia_mtd);
-}
-
-module_exit(spia_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Steven J. Hill <sjhill@realitydiluted.com");
-MODULE_DESCRIPTION("Board-specific glue layer for NAND flash on SPIA board");
diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c
index 3041d1f7ae3..fb8fd35fa66 100644
--- a/drivers/mtd/nand/tmio_nand.c
+++ b/drivers/mtd/nand/tmio_nand.c
@@ -4,7 +4,7 @@
  * Slightly murky pre-git history of the driver:
  *
  * Copyright (c) Ian Molton 2004, 2005, 2008
- *    Original work, independant of sharps code. Included hardware ECC support.
+ *    Original work, independent of sharps code. Included hardware ECC support.
  *    Hard ECC did not work for writes in the early revisions.
  * Copyright (c) Dirk Opfer 2005.
  *    Modifications developed from sharps code but
@@ -121,9 +121,6 @@ struct tmio_nand {
 
 #define mtd_to_tmio(m)			container_of(m, struct tmio_nand, mtd)
 
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-static const char *part_probes[] = { "cmdlinepart", NULL };
-#endif
 
 /*--------------------------------------------------------------------------*/
 
@@ -259,18 +256,6 @@ static void tmio_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 	tmio_ioread16_rep(tmio->fcr + FCR_DATA, buf, len >> 1);
 }
 
-static int
-tmio_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
-{
-	struct tmio_nand *tmio = mtd_to_tmio(mtd);
-	u16				*p = (u16 *) buf;
-
-	for (len >>= 1; len; len--)
-		if (*(p++) != tmio_ioread16(tmio->fcr + FCR_DATA))
-			return -EFAULT;
-	return 0;
-}
-
 static void tmio_nand_enable_hwecc(struct mtd_info *mtd, int mode)
 {
 	struct tmio_nand *tmio = mtd_to_tmio(mtd);
@@ -319,7 +304,7 @@ static int tmio_nand_correct_data(struct mtd_info *mtd, unsigned char *buf,
 
 static int tmio_hw_init(struct platform_device *dev, struct tmio_nand *tmio)
 {
-	struct mfd_cell *cell = dev_get_platdata(&dev->dev);
+	const struct mfd_cell *cell = mfd_get_cell(dev);
 	int ret;
 
 	if (cell->enable) {
@@ -363,7 +348,7 @@ static int tmio_hw_init(struct platform_device *dev, struct tmio_nand *tmio)
 
 static void tmio_hw_stop(struct platform_device *dev, struct tmio_nand *tmio)
 {
-	struct mfd_cell *cell = dev_get_platdata(&dev->dev);
+	const struct mfd_cell *cell = mfd_get_cell(dev);
 
 	tmio_iowrite8(FCR_MODE_POWER_OFF, tmio->fcr + FCR_MODE);
 	if (cell->disable)
@@ -372,8 +357,7 @@ static void tmio_hw_stop(struct platform_device *dev, struct tmio_nand *tmio)
 
 static int tmio_probe(struct platform_device *dev)
 {
-	struct mfd_cell *cell = dev_get_platdata(&dev->dev);
-	struct tmio_nand_data *data = cell->driver_data;
+	struct tmio_nand_data *data = dev_get_platdata(&dev->dev);
 	struct resource *fcr = platform_get_resource(dev,
 			IORESOURCE_MEM, 0);
 	struct resource *ccr = platform_get_resource(dev,
@@ -382,20 +366,14 @@ static int tmio_probe(struct platform_device *dev)
 	struct tmio_nand *tmio;
 	struct mtd_info *mtd;
 	struct nand_chip *nand_chip;
-#ifdef CONFIG_MTD_PARTITIONS
-	struct mtd_partition *parts;
-	int nbparts = 0;
-#endif
 	int retval;
 
 	if (data == NULL)
 		dev_warn(&dev->dev, "NULL platform data!\n");
 
-	tmio = kzalloc(sizeof *tmio, GFP_KERNEL);
-	if (!tmio) {
-		retval = -ENOMEM;
-		goto err_kzalloc;
-	}
+	tmio = devm_kzalloc(&dev->dev, sizeof(*tmio), GFP_KERNEL);
+	if (!tmio)
+		return -ENOMEM;
 
 	tmio->dev = dev;
 
@@ -405,22 +383,18 @@ static int tmio_probe(struct platform_device *dev)
 	mtd->priv = nand_chip;
 	mtd->name = "tmio-nand";
 
-	tmio->ccr = ioremap(ccr->start, resource_size(ccr));
-	if (!tmio->ccr) {
-		retval = -EIO;
-		goto err_iomap_ccr;
-	}
+	tmio->ccr = devm_ioremap(&dev->dev, ccr->start, resource_size(ccr));
+	if (!tmio->ccr)
+		return -EIO;
 
 	tmio->fcr_base = fcr->start & 0xfffff;
-	tmio->fcr = ioremap(fcr->start, resource_size(fcr));
-	if (!tmio->fcr) {
-		retval = -EIO;
-		goto err_iomap_fcr;
-	}
+	tmio->fcr = devm_ioremap(&dev->dev, fcr->start, resource_size(fcr));
+	if (!tmio->fcr)
+		return -EIO;
 
 	retval = tmio_hw_init(dev, tmio);
 	if (retval)
-		goto err_hwinit;
+		return retval;
 
 	/* Set address of NAND IO lines */
 	nand_chip->IO_ADDR_R = tmio->fcr;
@@ -432,12 +406,12 @@ static int tmio_probe(struct platform_device *dev)
 	nand_chip->read_byte = tmio_nand_read_byte;
 	nand_chip->write_buf = tmio_nand_write_buf;
 	nand_chip->read_buf = tmio_nand_read_buf;
-	nand_chip->verify_buf = tmio_nand_verify_buf;
 
 	/* set eccmode using hardware ECC */
 	nand_chip->ecc.mode = NAND_ECC_HW;
 	nand_chip->ecc.size = 512;
 	nand_chip->ecc.bytes = 6;
+	nand_chip->ecc.strength = 2;
 	nand_chip->ecc.hwctl = tmio_nand_enable_hwecc;
 	nand_chip->ecc.calculate = tmio_nand_calculate_ecc;
 	nand_chip->ecc.correct = tmio_nand_correct_data;
@@ -448,8 +422,8 @@ static int tmio_probe(struct platform_device *dev)
 	/* 15 us command delay time */
 	nand_chip->chip_delay = 15;
 
-	retval = request_irq(irq, &tmio_irq,
-				IRQF_DISABLED, dev_name(&dev->dev), tmio);
+	retval = devm_request_irq(&dev->dev, irq, &tmio_irq, 0,
+				  dev_name(&dev->dev), tmio);
 	if (retval) {
 		dev_err(&dev->dev, "request_irq error %d\n", retval);
 		goto err_irq;
@@ -461,41 +435,19 @@ static int tmio_probe(struct platform_device *dev)
 	/* Scan to find existence of the device */
 	if (nand_scan(mtd, 1)) {
 		retval = -ENODEV;
-		goto err_scan;
+		goto err_irq;
 	}
 	/* Register the partitions */
-#ifdef CONFIG_MTD_PARTITIONS
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-	nbparts = parse_mtd_partitions(mtd, part_probes, &parts, 0);
-#endif
-	if (nbparts <= 0 && data) {
-		parts = data->partition;
-		nbparts = data->num_partitions;
-	}
-
-	if (nbparts)
-		retval = add_mtd_partitions(mtd, parts, nbparts);
-	else
-#endif
-	retval = add_mtd_device(mtd);
-
+	retval = mtd_device_parse_register(mtd, NULL, NULL,
+					   data ? data->partition : NULL,
+					   data ? data->num_partitions : 0);
 	if (!retval)
 		return retval;
 
 	nand_release(mtd);
 
-err_scan:
-	if (tmio->irq)
-		free_irq(tmio->irq, tmio);
 err_irq:
 	tmio_hw_stop(dev, tmio);
-err_hwinit:
-	iounmap(tmio->fcr);
-err_iomap_fcr:
-	iounmap(tmio->ccr);
-err_iomap_ccr:
-	kfree(tmio);
-err_kzalloc:
 	return retval;
 }
 
@@ -504,19 +456,14 @@ static int tmio_remove(struct platform_device *dev)
 	struct tmio_nand *tmio = platform_get_drvdata(dev);
 
 	nand_release(&tmio->mtd);
-	if (tmio->irq)
-		free_irq(tmio->irq, tmio);
 	tmio_hw_stop(dev, tmio);
-	iounmap(tmio->fcr);
-	iounmap(tmio->ccr);
-	kfree(tmio);
 	return 0;
 }
 
 #ifdef CONFIG_PM
 static int tmio_suspend(struct platform_device *dev, pm_message_t state)
 {
-	struct mfd_cell *cell = dev_get_platdata(&dev->dev);
+	const struct mfd_cell *cell = mfd_get_cell(dev);
 
 	if (cell->suspend)
 		cell->suspend(dev);
@@ -527,7 +474,7 @@ static int tmio_suspend(struct platform_device *dev, pm_message_t state)
 
 static int tmio_resume(struct platform_device *dev)
 {
-	struct mfd_cell *cell = dev_get_platdata(&dev->dev);
+	const struct mfd_cell *cell = mfd_get_cell(dev);
 
 	/* FIXME - is this required or merely another attack of the broken
 	 * SHARP platform? Looks suspicious.
@@ -553,18 +500,7 @@ static struct platform_driver tmio_driver = {
 	.resume		= tmio_resume,
 };
 
-static int __init tmio_init(void)
-{
-	return platform_driver_register(&tmio_driver);
-}
-
-static void __exit tmio_exit(void)
-{
-	platform_driver_unregister(&tmio_driver);
-}
-
-module_init(tmio_init);
-module_exit(tmio_exit);
+module_platform_driver(tmio_driver);
 
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Ian Molton, Dirk Opfer, Chris Humbert, Dmitry Baryshkov");
diff --git a/drivers/mtd/nand/txx9ndfmc.c b/drivers/mtd/nand/txx9ndfmc.c
index 054a41c0ef4..c1622a5ba81 100644
--- a/drivers/mtd/nand/txx9ndfmc.c
+++ b/drivers/mtd/nand/txx9ndfmc.c
@@ -9,6 +9,7 @@
  * (C) Copyright TOSHIBA CORPORATION 2004-2007
  * All Rights Reserved.
  */
+#include <linux/err.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/module.h>
@@ -74,9 +75,6 @@ struct txx9ndfmc_drvdata {
 	unsigned char hold;	/* in gbusclock */
 	unsigned char spw;	/* in gbusclock */
 	struct nand_hw_control hw_control;
-#ifdef CONFIG_MTD_PARTITIONS
-	struct mtd_partition *parts[MAX_TXX9NDFMC_DEV];
-#endif
 };
 
 static struct platform_device *mtd_to_platdev(struct mtd_info *mtd)
@@ -89,7 +87,7 @@ static struct platform_device *mtd_to_platdev(struct mtd_info *mtd)
 static void __iomem *ndregaddr(struct platform_device *dev, unsigned int reg)
 {
 	struct txx9ndfmc_drvdata *drvdata = platform_get_drvdata(dev);
-	struct txx9ndfmc_platform_data *plat = dev->dev.platform_data;
+	struct txx9ndfmc_platform_data *plat = dev_get_platdata(&dev->dev);
 
 	return drvdata->base + (reg << plat->shift);
 }
@@ -134,25 +132,13 @@ static void txx9ndfmc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
 		*buf++ = __raw_readl(ndfdtr);
 }
 
-static int txx9ndfmc_verify_buf(struct mtd_info *mtd, const uint8_t *buf,
-				int len)
-{
-	struct platform_device *dev = mtd_to_platdev(mtd);
-	void __iomem *ndfdtr = ndregaddr(dev, TXX9_NDFDTR);
-
-	while (len--)
-		if (*buf++ != (uint8_t)__raw_readl(ndfdtr))
-			return -EFAULT;
-	return 0;
-}
-
 static void txx9ndfmc_cmd_ctrl(struct mtd_info *mtd, int cmd,
 			       unsigned int ctrl)
 {
 	struct nand_chip *chip = mtd->priv;
 	struct txx9ndfmc_priv *txx9_priv = chip->priv;
 	struct platform_device *dev = txx9_priv->dev;
-	struct txx9ndfmc_platform_data *plat = dev->dev.platform_data;
+	struct txx9ndfmc_platform_data *plat = dev_get_platdata(&dev->dev);
 
 	if (ctrl & NAND_CTRL_CHANGE) {
 		u32 mcr = txx9ndfmc_read(dev, TXX9_NDFMCR);
@@ -239,7 +225,7 @@ static void txx9ndfmc_enable_hwecc(struct mtd_info *mtd, int mode)
 
 static void txx9ndfmc_initialize(struct platform_device *dev)
 {
-	struct txx9ndfmc_platform_data *plat = dev->dev.platform_data;
+	struct txx9ndfmc_platform_data *plat = dev_get_platdata(&dev->dev);
 	struct txx9ndfmc_drvdata *drvdata = platform_get_drvdata(dev);
 	int tmout = 100;
 
@@ -277,8 +263,9 @@ static int txx9ndfmc_nand_scan(struct mtd_info *mtd)
 	ret = nand_scan_ident(mtd, 1, NULL);
 	if (!ret) {
 		if (mtd->writesize >= 512) {
-			chip->ecc.size = mtd->writesize;
-			chip->ecc.bytes = 3 * (mtd->writesize / 256);
+			/* Hardware ECC 6 byte ECC per 512 Byte data */
+			chip->ecc.size = 512;
+			chip->ecc.bytes = 6;
 		}
 		ret = nand_scan_tail(mtd);
 	}
@@ -287,29 +274,20 @@ static int txx9ndfmc_nand_scan(struct mtd_info *mtd)
 
 static int __init txx9ndfmc_probe(struct platform_device *dev)
 {
-	struct txx9ndfmc_platform_data *plat = dev->dev.platform_data;
-#ifdef CONFIG_MTD_PARTITIONS
-	static const char *probes[] = { "cmdlinepart", NULL };
-#endif
+	struct txx9ndfmc_platform_data *plat = dev_get_platdata(&dev->dev);
 	int hold, spw;
 	int i;
 	struct txx9ndfmc_drvdata *drvdata;
 	unsigned long gbusclk = plat->gbus_clock;
 	struct resource *res;
 
-	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -ENODEV;
 	drvdata = devm_kzalloc(&dev->dev, sizeof(*drvdata), GFP_KERNEL);
 	if (!drvdata)
 		return -ENOMEM;
-	if (!devm_request_mem_region(&dev->dev, res->start,
-				     resource_size(res), dev_name(&dev->dev)))
-		return -EBUSY;
-	drvdata->base = devm_ioremap(&dev->dev, res->start,
-				     resource_size(res));
-	if (!drvdata->base)
-		return -EBUSY;
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	drvdata->base = devm_ioremap_resource(&dev->dev, res);
+	if (IS_ERR(drvdata->base))
+		return PTR_ERR(drvdata->base);
 
 	hold = plat->hold ?: 20; /* tDH */
 	spw = plat->spw ?: 90; /* max(tREADID, tWP, tRP) */
@@ -336,19 +314,13 @@ static int __init txx9ndfmc_probe(struct platform_device *dev)
 		struct txx9ndfmc_priv *txx9_priv;
 		struct nand_chip *chip;
 		struct mtd_info *mtd;
-#ifdef CONFIG_MTD_PARTITIONS
-		int nr_parts;
-#endif
 
 		if (!(plat->ch_mask & (1 << i)))
 			continue;
 		txx9_priv = kzalloc(sizeof(struct txx9ndfmc_priv),
 				    GFP_KERNEL);
-		if (!txx9_priv) {
-			dev_err(&dev->dev, "Unable to allocate "
-				"TXx9 NDFMC MTD device structure.\n");
+		if (!txx9_priv)
 			continue;
-		}
 		chip = &txx9_priv->chip;
 		mtd = &txx9_priv->mtd;
 		mtd->owner = THIS_MODULE;
@@ -358,7 +330,6 @@ static int __init txx9ndfmc_probe(struct platform_device *dev)
 		chip->read_byte = txx9ndfmc_read_byte;
 		chip->read_buf = txx9ndfmc_read_buf;
 		chip->write_buf = txx9ndfmc_write_buf;
-		chip->verify_buf = txx9ndfmc_verify_buf;
 		chip->cmd_ctrl = txx9ndfmc_cmd_ctrl;
 		chip->dev_ready = txx9ndfmc_dev_ready;
 		chip->ecc.calculate = txx9ndfmc_calculate_ecc;
@@ -368,6 +339,7 @@ static int __init txx9ndfmc_probe(struct platform_device *dev)
 		/* txx9ndfmc_nand_scan will overwrite ecc.size and ecc.bytes */
 		chip->ecc.size = 256;
 		chip->ecc.bytes = 3;
+		chip->ecc.strength = 1;
 		chip->chip_delay = 100;
 		chip->controller = &drvdata->hw_control;
 
@@ -398,13 +370,7 @@ static int __init txx9ndfmc_probe(struct platform_device *dev)
 		}
 		mtd->name = txx9_priv->mtdname;
 
-#ifdef CONFIG_MTD_PARTITIONS
-		nr_parts = parse_mtd_partitions(mtd, probes,
-						&drvdata->parts[i], 0);
-		if (nr_parts > 0)
-			add_mtd_partitions(mtd, drvdata->parts[i], nr_parts);
-#endif
-		add_mtd_device(mtd);
+		mtd_device_parse_register(mtd, NULL, NULL, NULL, 0);
 		drvdata->mtds[i] = mtd;
 	}
 
@@ -416,7 +382,6 @@ static int __exit txx9ndfmc_remove(struct platform_device *dev)
 	struct txx9ndfmc_drvdata *drvdata = platform_get_drvdata(dev);
 	int i;
 
-	platform_set_drvdata(dev, NULL);
 	if (!drvdata)
 		return 0;
 	for (i = 0; i < MAX_TXX9NDFMC_DEV; i++) {
@@ -430,9 +395,6 @@ static int __exit txx9ndfmc_remove(struct platform_device *dev)
 		txx9_priv = chip->priv;
 
 		nand_release(mtd);
-#ifdef CONFIG_MTD_PARTITIONS
-		kfree(drvdata->parts[i]);
-#endif
 		kfree(txx9_priv->mtdname);
 		kfree(txx9_priv);
 	}
@@ -459,18 +421,7 @@ static struct platform_driver txx9ndfmc_driver = {
 	},
 };
 
-static int __init txx9ndfmc_init(void)
-{
-	return platform_driver_probe(&txx9ndfmc_driver, txx9ndfmc_probe);
-}
-
-static void __exit txx9ndfmc_exit(void)
-{
-	platform_driver_unregister(&txx9ndfmc_driver);
-}
-
-module_init(txx9ndfmc_init);
-module_exit(txx9ndfmc_exit);
+module_platform_driver_probe(txx9ndfmc_driver, txx9ndfmc_probe);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("TXx9 SoC NAND flash controller driver");
diff --git a/drivers/mtd/nand/xway_nand.c b/drivers/mtd/nand/xway_nand.c
new file mode 100644
index 00000000000..3f81dc8f214
--- /dev/null
+++ b/drivers/mtd/nand/xway_nand.c
@@ -0,0 +1,201 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright © 2012 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/mtd/nand.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
+
+#include <lantiq_soc.h>
+
+/* nand registers */
+#define EBU_ADDSEL1		0x24
+#define EBU_NAND_CON		0xB0
+#define EBU_NAND_WAIT		0xB4
+#define EBU_NAND_ECC0		0xB8
+#define EBU_NAND_ECC_AC		0xBC
+
+/* nand commands */
+#define NAND_CMD_ALE		(1 << 2)
+#define NAND_CMD_CLE		(1 << 3)
+#define NAND_CMD_CS		(1 << 4)
+#define NAND_WRITE_CMD_RESET	0xff
+#define NAND_WRITE_CMD		(NAND_CMD_CS | NAND_CMD_CLE)
+#define NAND_WRITE_ADDR		(NAND_CMD_CS | NAND_CMD_ALE)
+#define NAND_WRITE_DATA		(NAND_CMD_CS)
+#define NAND_READ_DATA		(NAND_CMD_CS)
+#define NAND_WAIT_WR_C		(1 << 3)
+#define NAND_WAIT_RD		(0x1)
+
+/* we need to tel the ebu which addr we mapped the nand to */
+#define ADDSEL1_MASK(x)		(x << 4)
+#define ADDSEL1_REGEN		1
+
+/* we need to tell the EBU that we have nand attached and set it up properly */
+#define BUSCON1_SETUP		(1 << 22)
+#define BUSCON1_BCGEN_RES	(0x3 << 12)
+#define BUSCON1_WAITWRC2	(2 << 8)
+#define BUSCON1_WAITRDC2	(2 << 6)
+#define BUSCON1_HOLDC1		(1 << 4)
+#define BUSCON1_RECOVC1		(1 << 2)
+#define BUSCON1_CMULT4		1
+
+#define NAND_CON_CE		(1 << 20)
+#define NAND_CON_OUT_CS1	(1 << 10)
+#define NAND_CON_IN_CS1		(1 << 8)
+#define NAND_CON_PRE_P		(1 << 7)
+#define NAND_CON_WP_P		(1 << 6)
+#define NAND_CON_SE_P		(1 << 5)
+#define NAND_CON_CS_P		(1 << 4)
+#define NAND_CON_CSMUX		(1 << 1)
+#define NAND_CON_NANDM		1
+
+static void xway_reset_chip(struct nand_chip *chip)
+{
+	unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W;
+	unsigned long flags;
+
+	nandaddr &= ~NAND_WRITE_ADDR;
+	nandaddr |= NAND_WRITE_CMD;
+
+	/* finish with a reset */
+	spin_lock_irqsave(&ebu_lock, flags);
+	writeb(NAND_WRITE_CMD_RESET, (void __iomem *) nandaddr);
+	while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
+		;
+	spin_unlock_irqrestore(&ebu_lock, flags);
+}
+
+static void xway_select_chip(struct mtd_info *mtd, int chip)
+{
+
+	switch (chip) {
+	case -1:
+		ltq_ebu_w32_mask(NAND_CON_CE, 0, EBU_NAND_CON);
+		ltq_ebu_w32_mask(NAND_CON_NANDM, 0, EBU_NAND_CON);
+		break;
+	case 0:
+		ltq_ebu_w32_mask(0, NAND_CON_NANDM, EBU_NAND_CON);
+		ltq_ebu_w32_mask(0, NAND_CON_CE, EBU_NAND_CON);
+		break;
+	default:
+		BUG();
+	}
+}
+
+static void xway_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+	unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
+	unsigned long flags;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		nandaddr &= ~(NAND_WRITE_CMD | NAND_WRITE_ADDR);
+		if (ctrl & NAND_CLE)
+			nandaddr |= NAND_WRITE_CMD;
+		else
+			nandaddr |= NAND_WRITE_ADDR;
+		this->IO_ADDR_W = (void __iomem *) nandaddr;
+	}
+
+	if (cmd != NAND_CMD_NONE) {
+		spin_lock_irqsave(&ebu_lock, flags);
+		writeb(cmd, this->IO_ADDR_W);
+		while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
+			;
+		spin_unlock_irqrestore(&ebu_lock, flags);
+	}
+}
+
+static int xway_dev_ready(struct mtd_info *mtd)
+{
+	return ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_RD;
+}
+
+static unsigned char xway_read_byte(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	unsigned long nandaddr = (unsigned long) this->IO_ADDR_R;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&ebu_lock, flags);
+	ret = ltq_r8((void __iomem *)(nandaddr + NAND_READ_DATA));
+	spin_unlock_irqrestore(&ebu_lock, flags);
+
+	return ret;
+}
+
+static int xway_nand_probe(struct platform_device *pdev)
+{
+	struct nand_chip *this = platform_get_drvdata(pdev);
+	unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
+	const __be32 *cs = of_get_property(pdev->dev.of_node,
+					"lantiq,cs", NULL);
+	u32 cs_flag = 0;
+
+	/* load our CS from the DT. Either we find a valid 1 or default to 0 */
+	if (cs && (*cs == 1))
+		cs_flag = NAND_CON_IN_CS1 | NAND_CON_OUT_CS1;
+
+	/* setup the EBU to run in NAND mode on our base addr */
+	ltq_ebu_w32(CPHYSADDR(nandaddr)
+		| ADDSEL1_MASK(3) | ADDSEL1_REGEN, EBU_ADDSEL1);
+
+	ltq_ebu_w32(BUSCON1_SETUP | BUSCON1_BCGEN_RES | BUSCON1_WAITWRC2
+		| BUSCON1_WAITRDC2 | BUSCON1_HOLDC1 | BUSCON1_RECOVC1
+		| BUSCON1_CMULT4, LTQ_EBU_BUSCON1);
+
+	ltq_ebu_w32(NAND_CON_NANDM | NAND_CON_CSMUX | NAND_CON_CS_P
+		| NAND_CON_SE_P | NAND_CON_WP_P | NAND_CON_PRE_P
+		| cs_flag, EBU_NAND_CON);
+
+	/* finish with a reset */
+	xway_reset_chip(this);
+
+	return 0;
+}
+
+/* allow users to override the partition in DT using the cmdline */
+static const char *part_probes[] = { "cmdlinepart", "ofpart", NULL };
+
+static struct platform_nand_data xway_nand_data = {
+	.chip = {
+		.nr_chips		= 1,
+		.chip_delay		= 30,
+		.part_probe_types	= part_probes,
+	},
+	.ctrl = {
+		.probe		= xway_nand_probe,
+		.cmd_ctrl	= xway_cmd_ctrl,
+		.dev_ready	= xway_dev_ready,
+		.select_chip	= xway_select_chip,
+		.read_byte	= xway_read_byte,
+	}
+};
+
+/*
+ * Try to find the node inside the DT. If it is available attach out
+ * platform_nand_data
+ */
+static int __init xway_register_nand(void)
+{
+	struct device_node *node;
+	struct platform_device *pdev;
+
+	node = of_find_compatible_node(NULL, NULL, "lantiq,nand-xway");
+	if (!node)
+		return -ENOENT;
+	pdev = of_find_device_by_node(node);
+	if (!pdev)
+		return -EINVAL;
+	pdev->dev.platform_data = &xway_nand_data;
+	of_node_put(node);
+	return 0;
+}
+
+subsys_initcall(xway_register_nand);
diff --git a/drivers/mtd/nftlcore.c b/drivers/mtd/nftlcore.c
index a4578bf903a..46f27de018c 100644
--- a/drivers/mtd/nftlcore.c
+++ b/drivers/mtd/nftlcore.c
@@ -1,11 +1,22 @@
-/* Linux driver for NAND Flash Translation Layer      */
-/* (c) 1999 Machine Vision Holdings, Inc.             */
-/* Author: David Woodhouse <dwmw2@infradead.org>      */
-
 /*
-  The contents of this file are distributed under the GNU General
-  Public License version 2. The author places no additional
-  restrictions of any kind on it.
+ * Linux driver for NAND Flash Translation Layer
+ *
+ * Copyright © 1999 Machine Vision Holdings, Inc.
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #define PRERELEASE
@@ -39,27 +50,18 @@ static void nftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
 	struct NFTLrecord *nftl;
 	unsigned long temp;
 
-	if (mtd->type != MTD_NANDFLASH || mtd->size > UINT_MAX)
+	if (!mtd_type_is_nand(mtd) || mtd->size > UINT_MAX)
 		return;
 	/* OK, this is moderately ugly.  But probably safe.  Alternatives? */
 	if (memcmp(mtd->name, "DiskOnChip", 10))
 		return;
 
-	if (!mtd->block_isbad) {
-		printk(KERN_ERR
-"NFTL no longer supports the old DiskOnChip drivers loaded via docprobe.\n"
-"Please use the new diskonchip driver under the NAND subsystem.\n");
-		return;
-	}
-
-	DEBUG(MTD_DEBUG_LEVEL1, "NFTL: add_mtd for %s\n", mtd->name);
+	pr_debug("NFTL: add_mtd for %s\n", mtd->name);
 
 	nftl = kzalloc(sizeof(struct NFTLrecord), GFP_KERNEL);
 
-	if (!nftl) {
-		printk(KERN_WARNING "NFTL: out of memory for data structures\n");
+	if (!nftl)
 		return;
-	}
 
 	nftl->mbd.mtd = mtd;
 	nftl->mbd.devnum = -1;
@@ -121,7 +123,7 @@ static void nftl_remove_dev(struct mtd_blktrans_dev *dev)
 {
 	struct NFTLrecord *nftl = (void *)dev;
 
-	DEBUG(MTD_DEBUG_LEVEL1, "NFTL: remove_dev (i=%d)\n", dev->devnum);
+	pr_debug("NFTL: remove_dev (i=%d)\n", dev->devnum);
 
 	del_mtd_blktrans_dev(dev);
 	kfree(nftl->ReplUnitTable);
@@ -138,13 +140,13 @@ int nftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len,
 	struct mtd_oob_ops ops;
 	int res;
 
-	ops.mode = MTD_OOB_PLACE;
+	ops.mode = MTD_OPS_PLACE_OOB;
 	ops.ooboffs = offs & mask;
 	ops.ooblen = len;
 	ops.oobbuf = buf;
 	ops.datbuf = NULL;
 
-	res = mtd->read_oob(mtd, offs & ~mask, &ops);
+	res = mtd_read_oob(mtd, offs & ~mask, &ops);
 	*retlen = ops.oobretlen;
 	return res;
 }
@@ -159,13 +161,13 @@ int nftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len,
 	struct mtd_oob_ops ops;
 	int res;
 
-	ops.mode = MTD_OOB_PLACE;
+	ops.mode = MTD_OPS_PLACE_OOB;
 	ops.ooboffs = offs & mask;
 	ops.ooblen = len;
 	ops.oobbuf = buf;
 	ops.datbuf = NULL;
 
-	res = mtd->write_oob(mtd, offs & ~mask, &ops);
+	res = mtd_write_oob(mtd, offs & ~mask, &ops);
 	*retlen = ops.oobretlen;
 	return res;
 }
@@ -182,14 +184,14 @@ static int nftl_write(struct mtd_info *mtd, loff_t offs, size_t len,
 	struct mtd_oob_ops ops;
 	int res;
 
-	ops.mode = MTD_OOB_PLACE;
+	ops.mode = MTD_OPS_PLACE_OOB;
 	ops.ooboffs = offs & mask;
 	ops.ooblen = mtd->oobsize;
 	ops.oobbuf = oob;
 	ops.datbuf = buf;
 	ops.len = len;
 
-	res = mtd->write_oob(mtd, offs & ~mask, &ops);
+	res = mtd_write_oob(mtd, offs & ~mask, &ops);
 	*retlen = ops.retlen;
 	return res;
 }
@@ -209,7 +211,7 @@ static u16 NFTL_findfreeblock(struct NFTLrecord *nftl, int desperate )
 
 	/* Normally, we force a fold to happen before we run out of free blocks completely */
 	if (!desperate && nftl->numfreeEUNs < 2) {
-		DEBUG(MTD_DEBUG_LEVEL1, "NFTL_findfreeblock: there are too few free EUNs\n");
+		pr_debug("NFTL_findfreeblock: there are too few free EUNs\n");
 		return BLOCK_NIL;
 	}
 
@@ -280,8 +282,7 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p
 			if (block == 2) {
 				foldmark = oob.u.c.FoldMark | oob.u.c.FoldMark1;
 				if (foldmark == FOLD_MARK_IN_PROGRESS) {
-					DEBUG(MTD_DEBUG_LEVEL1,
-					      "Write Inhibited on EUN %d\n", thisEUN);
+					pr_debug("Write Inhibited on EUN %d\n", thisEUN);
 					inplace = 0;
 				} else {
 					/* There's no other reason not to do inplace,
@@ -346,7 +347,7 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p
 			if (BlockLastState[block] != SECTOR_FREE &&
 			    BlockMap[block] != BLOCK_NIL &&
 			    BlockMap[block] != targetEUN) {
-				DEBUG(MTD_DEBUG_LEVEL1, "Setting inplace to 0. VUC %d, "
+				pr_debug("Setting inplace to 0. VUC %d, "
 				      "block %d was %x lastEUN, "
 				      "and is in EUN %d (%s) %d\n",
 				      thisVUC, block, BlockLastState[block],
@@ -362,14 +363,14 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p
 		    pendingblock < ((thisVUC + 1)* (nftl->EraseSize / 512)) &&
 		    BlockLastState[pendingblock - (thisVUC * (nftl->EraseSize / 512))] !=
 		    SECTOR_FREE) {
-			DEBUG(MTD_DEBUG_LEVEL1, "Pending write not free in EUN %d. "
+			pr_debug("Pending write not free in EUN %d. "
 			      "Folding out of place.\n", targetEUN);
 			inplace = 0;
 		}
 	}
 
 	if (!inplace) {
-		DEBUG(MTD_DEBUG_LEVEL1, "Cannot fold Virtual Unit Chain %d in place. "
+		pr_debug("Cannot fold Virtual Unit Chain %d in place. "
 		      "Trying out-of-place\n", thisVUC);
 		/* We need to find a targetEUN to fold into. */
 		targetEUN = NFTL_findfreeblock(nftl, 1);
@@ -399,7 +400,7 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p
 	   and the Erase Unit into which we are supposed to be copying.
 	   Go for it.
 	*/
-	DEBUG(MTD_DEBUG_LEVEL1,"Folding chain %d into unit %d\n", thisVUC, targetEUN);
+	pr_debug("Folding chain %d into unit %d\n", thisVUC, targetEUN);
 	for (block = 0; block < nftl->EraseSize / 512 ; block++) {
 		unsigned char movebuf[512];
 		int ret;
@@ -415,12 +416,17 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p
 		if (BlockMap[block] == BLOCK_NIL)
 			continue;
 
-		ret = mtd->read(mtd, (nftl->EraseSize * BlockMap[block]) + (block * 512),
-				512, &retlen, movebuf);
-		if (ret < 0 && ret != -EUCLEAN) {
-			ret = mtd->read(mtd, (nftl->EraseSize * BlockMap[block])
-					+ (block * 512), 512, &retlen,
-					movebuf);
+		ret = mtd_read(mtd,
+			       (nftl->EraseSize * BlockMap[block]) + (block * 512),
+			       512,
+			       &retlen,
+			       movebuf);
+		if (ret < 0 && !mtd_is_bitflip(ret)) {
+			ret = mtd_read(mtd,
+				       (nftl->EraseSize * BlockMap[block]) + (block * 512),
+				       512,
+				       &retlen,
+				       movebuf);
 			if (ret != -EIO)
 				printk("Error went away on retry.\n");
 		}
@@ -446,7 +452,7 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p
 	   has duplicate chains, we need to free one of the chains because it's not necessary any more.
 	*/
 	thisEUN = nftl->EUNtable[thisVUC];
-	DEBUG(MTD_DEBUG_LEVEL1,"Want to erase\n");
+	pr_debug("Want to erase\n");
 
 	/* For each block in the old chain (except the targetEUN of course),
 	   free it and make it available for future use */
@@ -559,7 +565,7 @@ static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block)
 				      (writeEUN * nftl->EraseSize) + blockofs,
 				      8, &retlen, (char *)&bci);
 
-			DEBUG(MTD_DEBUG_LEVEL2, "Status of block %d in EUN %d is %x\n",
+			pr_debug("Status of block %d in EUN %d is %x\n",
 			      block , writeEUN, le16_to_cpu(bci.Status));
 
 			status = bci.Status | bci.Status1;
@@ -612,7 +618,7 @@ static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block)
 				   but they are reserved for when we're
 				   desperate. Well, now we're desperate.
 				*/
-				DEBUG(MTD_DEBUG_LEVEL1, "Using desperate==1 to find free EUN to accommodate write to VUC %d\n", thisVUC);
+				pr_debug("Using desperate==1 to find free EUN to accommodate write to VUC %d\n", thisVUC);
 				writeEUN = NFTL_findfreeblock(nftl, 1);
 			}
 			if (writeEUN == BLOCK_NIL) {
@@ -763,9 +769,9 @@ static int nftl_readblock(struct mtd_blktrans_dev *mbd, unsigned long block,
 	} else {
 		loff_t ptr = (lastgoodEUN * nftl->EraseSize) + blockofs;
 		size_t retlen;
-		int res = mtd->read(mtd, ptr, 512, &retlen, buffer);
+		int res = mtd_read(mtd, ptr, 512, &retlen, buffer);
 
-		if (res < 0 && res != -EUCLEAN)
+		if (res < 0 && !mtd_is_bitflip(res))
 			return -EIO;
 	}
 	return 0;
diff --git a/drivers/mtd/nftlmount.c b/drivers/mtd/nftlmount.c
index 8b22b1836e9..51b9d6af307 100644
--- a/drivers/mtd/nftlmount.c
+++ b/drivers/mtd/nftlmount.c
@@ -2,7 +2,8 @@
  * NFTL mount code with extensive checks
  *
  * Author: Fabrice Bellard (fabrice.bellard@netgem.com)
- * Copyright (C) 2000 Netgem S.A.
+ * Copyright © 2000 Netgem S.A.
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -31,7 +32,7 @@
 
 /* find_boot_record: Find the NFTL Media Header and its Spare copy which contains the
  *	various device information of the NFTL partition and Bad Unit Table. Update
- *	the ReplUnitTable[] table accroding to the Bad Unit Table. ReplUnitTable[]
+ *	the ReplUnitTable[] table according to the Bad Unit Table. ReplUnitTable[]
  *	is used for management of Erase Unit in other routines in nftl.c and nftlmount.c
  */
 static int find_boot_record(struct NFTLrecord *nftl)
@@ -62,8 +63,8 @@ static int find_boot_record(struct NFTLrecord *nftl)
 
 		/* Check for ANAND header first. Then can whinge if it's found but later
 		   checks fail */
-		ret = mtd->read(mtd, block * nftl->EraseSize, SECTORSIZE,
-				&retlen, buf);
+		ret = mtd_read(mtd, block * nftl->EraseSize, SECTORSIZE,
+			       &retlen, buf);
 		/* We ignore ret in case the ECC of the MediaHeader is invalid
 		   (which is apparently acceptable) */
 		if (retlen != SECTORSIZE) {
@@ -241,7 +242,8 @@ The new DiskOnChip driver already scanned the bad block table.  Just query it.
 			if (buf[i & (SECTORSIZE - 1)] != 0xff)
 				nftl->ReplUnitTable[i] = BLOCK_RESERVED;
 #endif
-			if (nftl->mbd.mtd->block_isbad(nftl->mbd.mtd, i * nftl->EraseSize))
+			if (mtd_block_isbad(nftl->mbd.mtd,
+					    i * nftl->EraseSize))
 				nftl->ReplUnitTable[i] = BLOCK_RESERVED;
 		}
 
@@ -273,7 +275,7 @@ static int check_free_sectors(struct NFTLrecord *nftl, unsigned int address, int
 	int i;
 
 	for (i = 0; i < len; i += SECTORSIZE) {
-		if (mtd->read(mtd, address, SECTORSIZE, &retlen, buf))
+		if (mtd_read(mtd, address, SECTORSIZE, &retlen, buf))
 			return -1;
 		if (memcmpb(buf, 0xff, SECTORSIZE) != 0)
 			return -1;
@@ -296,7 +298,7 @@ static int check_free_sectors(struct NFTLrecord *nftl, unsigned int address, int
  *
  * Return: 0 when succeed, -1 on error.
  *
- *  ToDo: 1. Is it neceressary to check_free_sector after erasing ??
+ *  ToDo: 1. Is it necessary to check_free_sector after erasing ??
  */
 int NFTL_formatblock(struct NFTLrecord *nftl, int block)
 {
@@ -325,7 +327,7 @@ int NFTL_formatblock(struct NFTLrecord *nftl, int block)
 	instr->mtd = nftl->mbd.mtd;
 	instr->addr = block * nftl->EraseSize;
 	instr->len = nftl->EraseSize;
-	mtd->erase(mtd, instr);
+	mtd_erase(mtd, instr);
 
 	if (instr->state == MTD_ERASE_FAILED) {
 		printk("Error while formatting block %d\n", block);
@@ -336,7 +338,7 @@ int NFTL_formatblock(struct NFTLrecord *nftl, int block)
 		nb_erases = le32_to_cpu(uci.WearInfo);
 		nb_erases++;
 
-		/* wrap (almost impossible with current flashs) or free block */
+		/* wrap (almost impossible with current flash) or free block */
 		if (nb_erases == 0)
 			nb_erases = 1;
 
@@ -354,7 +356,7 @@ int NFTL_formatblock(struct NFTLrecord *nftl, int block)
 fail:
 	/* could not format, update the bad block table (caller is responsible
 	   for setting the ReplUnitTable to BLOCK_RESERVED on failure) */
-	nftl->mbd.mtd->block_markbad(nftl->mbd.mtd, instr->addr);
+	mtd_block_markbad(nftl->mbd.mtd, instr->addr);
 	return -1;
 }
 
@@ -362,10 +364,10 @@ fail:
  *	Mark as 'IGNORE' each incorrect sector. This check is only done if the chain
  *	was being folded when NFTL was interrupted.
  *
- *	The check_free_sectors in this function is neceressary. There is a possible
+ *	The check_free_sectors in this function is necessary. There is a possible
  *	situation that after writing the Data area, the Block Control Information is
  *	not updated according (due to power failure or something) which leaves the block
- *	in an umconsistent state. So we have to check if a block is really FREE in this
+ *	in an inconsistent state. So we have to check if a block is really FREE in this
  *	case. */
 static void check_sectors_in_chain(struct NFTLrecord *nftl, unsigned int first_block)
 {
@@ -427,7 +429,7 @@ static int calc_chain_length(struct NFTLrecord *nftl, unsigned int first_block)
 
 	for (;;) {
 		length++;
-		/* avoid infinite loops, although this is guaranted not to
+		/* avoid infinite loops, although this is guaranteed not to
 		   happen because of the previous checks */
 		if (length >= nftl->nb_blocks) {
 			printk("nftl: length too long %d !\n", length);
@@ -446,11 +448,11 @@ static int calc_chain_length(struct NFTLrecord *nftl, unsigned int first_block)
 /* format_chain: Format an invalid Virtual Unit chain. It frees all the Erase Units in a
  *	Virtual Unit Chain, i.e. all the units are disconnected.
  *
- *	It is not stricly correct to begin from the first block of the chain because
+ *	It is not strictly correct to begin from the first block of the chain because
  *	if we stop the code, we may see again a valid chain if there was a first_block
  *	flag in a block inside it. But is it really a problem ?
  *
- * FixMe: Figure out what the last statesment means. What if power failure when we are
+ * FixMe: Figure out what the last statement means. What if power failure when we are
  *	in the for (;;) loop formatting blocks ??
  */
 static void format_chain(struct NFTLrecord *nftl, unsigned int first_block)
@@ -484,7 +486,7 @@ static void format_chain(struct NFTLrecord *nftl, unsigned int first_block)
  *	totally free (only 0xff).
  *
  * Definition: Free Erase Unit -- A properly erased/formatted Free Erase Unit should have meet the
- *	following critia:
+ *	following criteria:
  *	1. */
 static int check_and_mark_free_block(struct NFTLrecord *nftl, int block)
 {
@@ -501,7 +503,7 @@ static int check_and_mark_free_block(struct NFTLrecord *nftl, int block)
 	erase_mark = le16_to_cpu ((h1.EraseMark | h1.EraseMark1));
 	if (erase_mark != ERASE_MARK) {
 		/* if no erase mark, the block must be totally free. This is
-		   possible in two cases : empty filsystem or interrupted erase (very unlikely) */
+		   possible in two cases : empty filesystem or interrupted erase (very unlikely) */
 		if (check_free_sectors (nftl, block * nftl->EraseSize, nftl->EraseSize, 1) != 0)
 			return -1;
 
@@ -543,7 +545,7 @@ static int check_and_mark_free_block(struct NFTLrecord *nftl, int block)
 /* get_fold_mark: Read fold mark from Unit Control Information #2, we use FOLD_MARK_IN_PROGRESS
  *	to indicate that we are in the progression of a Virtual Unit Chain folding. If the UCI #2
  *	is FOLD_MARK_IN_PROGRESS when mounting the NFTL, the (previous) folding process is interrupted
- *	for some reason. A clean up/check of the VUC is neceressary in this case.
+ *	for some reason. A clean up/check of the VUC is necessary in this case.
  *
  * WARNING: return 0 if read error
  */
@@ -656,7 +658,7 @@ int NFTL_mount(struct NFTLrecord *s)
 						printk("Block %d: incorrect logical block: %d expected: %d\n",
 						       block, logical_block, first_logical_block);
 						/* the chain is incorrect : we must format it,
-						   but we need to read it completly */
+						   but we need to read it completely */
 						do_format_chain = 1;
 					}
 					if (is_first_block) {
@@ -668,7 +670,7 @@ int NFTL_mount(struct NFTLrecord *s)
 							printk("Block %d: incorrectly marked as first block in chain\n",
 							       block);
 							/* the chain is incorrect : we must format it,
-							   but we need to read it completly */
+							   but we need to read it completely */
 							do_format_chain = 1;
 						} else {
 							printk("Block %d: folding in progress - ignoring first block flag\n",
diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/ofpart.c
index 4f0d635674f..aa26c32e1bc 100644
--- a/drivers/mtd/ofpart.c
+++ b/drivers/mtd/ofpart.c
@@ -1,11 +1,11 @@
 /*
  * Flash partitions described by the OF (or flattened) device tree
  *
- * Copyright (C) 2006 MontaVista Software Inc.
+ * Copyright © 2006 MontaVista Software Inc.
  * Author: Vitaly Wool <vwool@ru.mvista.com>
  *
  * Revised to handle newer style flash binding by:
- *   Copyright (C) 2007 David Gibson, IBM Corporation.
+ *   Copyright © 2007 David Gibson, IBM Corporation.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -20,19 +20,36 @@
 #include <linux/slab.h>
 #include <linux/mtd/partitions.h>
 
-int __devinit of_mtd_parse_partitions(struct device *dev,
-                                      struct device_node *node,
-                                      struct mtd_partition **pparts)
+static bool node_has_compatible(struct device_node *pp)
 {
+	return of_get_property(pp, "compatible", NULL);
+}
+
+static int parse_ofpart_partitions(struct mtd_info *master,
+				   struct mtd_partition **pparts,
+				   struct mtd_part_parser_data *data)
+{
+	struct device_node *node;
 	const char *partname;
 	struct device_node *pp;
 	int nr_parts, i;
 
+
+	if (!data)
+		return 0;
+
+	node = data->of_node;
+	if (!node)
+		return 0;
+
 	/* First count the subnodes */
-	pp = NULL;
 	nr_parts = 0;
-	while ((pp = of_get_next_child(node, pp)))
+	for_each_child_of_node(node,  pp) {
+		if (node_has_compatible(pp))
+			continue;
+
 		nr_parts++;
+	}
 
 	if (nr_parts == 0)
 		return 0;
@@ -41,11 +58,14 @@ int __devinit of_mtd_parse_partitions(struct device *dev,
 	if (!*pparts)
 		return -ENOMEM;
 
-	pp = NULL;
 	i = 0;
-	while ((pp = of_get_next_child(node, pp))) {
-		const u32 *reg;
+	for_each_child_of_node(node,  pp) {
+		const __be32 *reg;
 		int len;
+		int a_cells, s_cells;
+
+		if (node_has_compatible(pp))
+			continue;
 
 		reg = of_get_property(pp, "reg", &len);
 		if (!reg) {
@@ -53,23 +73,28 @@ int __devinit of_mtd_parse_partitions(struct device *dev,
 			continue;
 		}
 
-		(*pparts)[i].offset = reg[0];
-		(*pparts)[i].size = reg[1];
+		a_cells = of_n_addr_cells(pp);
+		s_cells = of_n_size_cells(pp);
+		(*pparts)[i].offset = of_read_number(reg, a_cells);
+		(*pparts)[i].size = of_read_number(reg + a_cells, s_cells);
 
 		partname = of_get_property(pp, "label", &len);
 		if (!partname)
 			partname = of_get_property(pp, "name", &len);
-		(*pparts)[i].name = (char *)partname;
+		(*pparts)[i].name = partname;
 
 		if (of_get_property(pp, "read-only", &len))
-			(*pparts)[i].mask_flags = MTD_WRITEABLE;
+			(*pparts)[i].mask_flags |= MTD_WRITEABLE;
+
+		if (of_get_property(pp, "lock", &len))
+			(*pparts)[i].mask_flags |= MTD_POWERUP_LOCK;
 
 		i++;
 	}
 
 	if (!i) {
 		of_node_put(pp);
-		dev_err(dev, "No valid partition found on %s\n", node->full_name);
+		pr_err("No valid partition found on %s\n", node->full_name);
 		kfree(*pparts);
 		*pparts = NULL;
 		return -EINVAL;
@@ -77,6 +102,97 @@ int __devinit of_mtd_parse_partitions(struct device *dev,
 
 	return nr_parts;
 }
-EXPORT_SYMBOL(of_mtd_parse_partitions);
+
+static struct mtd_part_parser ofpart_parser = {
+	.owner = THIS_MODULE,
+	.parse_fn = parse_ofpart_partitions,
+	.name = "ofpart",
+};
+
+static int parse_ofoldpart_partitions(struct mtd_info *master,
+				      struct mtd_partition **pparts,
+				      struct mtd_part_parser_data *data)
+{
+	struct device_node *dp;
+	int i, plen, nr_parts;
+	const struct {
+		__be32 offset, len;
+	} *part;
+	const char *names;
+
+	if (!data)
+		return 0;
+
+	dp = data->of_node;
+	if (!dp)
+		return 0;
+
+	part = of_get_property(dp, "partitions", &plen);
+	if (!part)
+		return 0; /* No partitions found */
+
+	pr_warning("Device tree uses obsolete partition map binding: %s\n",
+			dp->full_name);
+
+	nr_parts = plen / sizeof(part[0]);
+
+	*pparts = kzalloc(nr_parts * sizeof(*(*pparts)), GFP_KERNEL);
+	if (!*pparts)
+		return -ENOMEM;
+
+	names = of_get_property(dp, "partition-names", &plen);
+
+	for (i = 0; i < nr_parts; i++) {
+		(*pparts)[i].offset = be32_to_cpu(part->offset);
+		(*pparts)[i].size   = be32_to_cpu(part->len) & ~1;
+		/* bit 0 set signifies read only partition */
+		if (be32_to_cpu(part->len) & 1)
+			(*pparts)[i].mask_flags = MTD_WRITEABLE;
+
+		if (names && (plen > 0)) {
+			int len = strlen(names) + 1;
+
+			(*pparts)[i].name = names;
+			plen -= len;
+			names += len;
+		} else {
+			(*pparts)[i].name = "unnamed";
+		}
+
+		part++;
+	}
+
+	return nr_parts;
+}
+
+static struct mtd_part_parser ofoldpart_parser = {
+	.owner = THIS_MODULE,
+	.parse_fn = parse_ofoldpart_partitions,
+	.name = "ofoldpart",
+};
+
+static int __init ofpart_parser_init(void)
+{
+	register_mtd_parser(&ofpart_parser);
+	register_mtd_parser(&ofoldpart_parser);
+	return 0;
+}
+
+static void __exit ofpart_parser_exit(void)
+{
+	deregister_mtd_parser(&ofpart_parser);
+	deregister_mtd_parser(&ofoldpart_parser);
+}
+
+module_init(ofpart_parser_init);
+module_exit(ofpart_parser_exit);
 
 MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Parser for MTD partitioning information in device tree");
+MODULE_AUTHOR("Vitaly Wool, David Gibson");
+/*
+ * When MTD core cannot find the requested parser, it tries to load the module
+ * with the same name. Since we provide the ofoldpart parser, we should have
+ * the corresponding alias.
+ */
+MODULE_ALIAS("ofoldpart");
diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig
index 9a49d68ba5f..ab2607273e8 100644
--- a/drivers/mtd/onenand/Kconfig
+++ b/drivers/mtd/onenand/Kconfig
@@ -1,7 +1,7 @@
 menuconfig MTD_ONENAND
 	tristate "OneNAND Device Support"
 	depends on MTD
-	select MTD_PARTITIONS
+	depends on HAS_IOMEM
 	help
 	  This enables support for accessing all type of OneNAND flash
 	  devices. For further information see
@@ -25,21 +25,21 @@ config MTD_ONENAND_GENERIC
 
 config MTD_ONENAND_OMAP2
 	tristate "OneNAND on OMAP2/OMAP3 support"
-	depends on MTD_ONENAND && (ARCH_OMAP2 || ARCH_OMAP3)
+	depends on ARCH_OMAP2 || ARCH_OMAP3
 	help
 	  Support for a OneNAND flash device connected to an OMAP2/OMAP3 CPU
 	  via the GPMC memory controller.
 
 config MTD_ONENAND_SAMSUNG
         tristate "OneNAND on Samsung SOC controller support"
-        depends on MTD_ONENAND && (ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210)
+        depends on ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS4
         help
-          Support for a OneNAND flash device connected to an Samsung SOC
-          S3C64XX/S5PC1XX controller.
+          Support for a OneNAND flash device connected to an Samsung SOC.
+          S3C64XX/S5PC100 use command mapping method.
+          S5PC110/S5PC210 use generic OneNAND method.
 
 config MTD_ONENAND_OTP
 	bool "OneNAND OTP Support"
-	select HAVE_MTD_OTP
 	help
 	  One Block of the NAND Flash Array memory is reserved as
 	  a One-Time Programmable Block memory area.
@@ -67,10 +67,4 @@ config MTD_ONENAND_2X_PROGRAM
 
 	  And more recent chips
 
-config MTD_ONENAND_SIM
-	tristate "OneNAND simulator support"
-	help
-	  The simulator may simulate various OneNAND flash chips for the
-	  OneNAND MTD layer.
-
 endif # MTD_ONENAND
diff --git a/drivers/mtd/onenand/Makefile b/drivers/mtd/onenand/Makefile
index 2b7884c7577..9d6540e8b3d 100644
--- a/drivers/mtd/onenand/Makefile
+++ b/drivers/mtd/onenand/Makefile
@@ -10,7 +10,4 @@ obj-$(CONFIG_MTD_ONENAND_GENERIC)	+= generic.o
 obj-$(CONFIG_MTD_ONENAND_OMAP2)		+= omap2.o
 obj-$(CONFIG_MTD_ONENAND_SAMSUNG)       += samsung.o
 
-# Simulator
-obj-$(CONFIG_MTD_ONENAND_SIM)		+= onenand_sim.o
-
 onenand-objs = onenand_base.o onenand_bbt.o
diff --git a/drivers/mtd/onenand/generic.c b/drivers/mtd/onenand/generic.c
index e78914938c5..093c29ac1a1 100644
--- a/drivers/mtd/onenand/generic.c
+++ b/drivers/mtd/onenand/generic.c
@@ -13,7 +13,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
@@ -30,20 +29,15 @@
  */
 #define DRIVER_NAME	"onenand-flash"
 
-#ifdef CONFIG_MTD_PARTITIONS
-static const char *part_probes[] = { "cmdlinepart", NULL,  };
-#endif
-
 struct onenand_info {
 	struct mtd_info		mtd;
-	struct mtd_partition	*parts;
 	struct onenand_chip	onenand;
 };
 
-static int __devinit generic_onenand_probe(struct platform_device *pdev)
+static int generic_onenand_probe(struct platform_device *pdev)
 {
 	struct onenand_info *info;
-	struct onenand_platform_data *pdata = pdev->dev.platform_data;
+	struct onenand_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	struct resource *res = pdev->resource;
 	unsigned long size = resource_size(res);
 	int err;
@@ -63,7 +57,7 @@ static int __devinit generic_onenand_probe(struct platform_device *pdev)
 		goto out_release_mem_region;
 	}
 
-	info->onenand.mmcontrol = pdata ? pdata->mmcontrol : 0;
+	info->onenand.mmcontrol = pdata ? pdata->mmcontrol : NULL;
 	info->onenand.irq = platform_get_irq(pdev, 0);
 
 	info->mtd.name = dev_name(&pdev->dev);
@@ -75,15 +69,9 @@ static int __devinit generic_onenand_probe(struct platform_device *pdev)
 		goto out_iounmap;
 	}
 
-#ifdef CONFIG_MTD_PARTITIONS
-	err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0);
-	if (err > 0)
-		add_mtd_partitions(&info->mtd, info->parts, err);
-	else if (err <= 0 && pdata && pdata->parts)
-		add_mtd_partitions(&info->mtd, pdata->parts, pdata->nr_parts);
-	else
-#endif
-		err = add_mtd_device(&info->mtd);
+	err = mtd_device_parse_register(&info->mtd, NULL, NULL,
+					pdata ? pdata->parts : NULL,
+					pdata ? pdata->nr_parts : 0);
 
 	platform_set_drvdata(pdev, info);
 
@@ -99,20 +87,13 @@ out_free_info:
 	return err;
 }
 
-static int __devexit generic_onenand_remove(struct platform_device *pdev)
+static int generic_onenand_remove(struct platform_device *pdev)
 {
 	struct onenand_info *info = platform_get_drvdata(pdev);
 	struct resource *res = pdev->resource;
 	unsigned long size = resource_size(res);
 
-	platform_set_drvdata(pdev, NULL);
-
 	if (info) {
-		if (info->parts)
-			del_mtd_partitions(&info->mtd);
-		else
-			del_mtd_device(&info->mtd);
-
 		onenand_release(&info->mtd);
 		release_mem_region(res->start, size);
 		iounmap(info->onenand.base);
@@ -128,24 +109,12 @@ static struct platform_driver generic_onenand_driver = {
 		.owner		= THIS_MODULE,
 	},
 	.probe		= generic_onenand_probe,
-	.remove		= __devexit_p(generic_onenand_remove),
+	.remove		= generic_onenand_remove,
 };
 
-MODULE_ALIAS(DRIVER_NAME);
-
-static int __init generic_onenand_init(void)
-{
-	return platform_driver_register(&generic_onenand_driver);
-}
-
-static void __exit generic_onenand_exit(void)
-{
-	platform_driver_unregister(&generic_onenand_driver);
-}
-
-module_init(generic_onenand_init);
-module_exit(generic_onenand_exit);
+module_platform_driver(generic_onenand_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>");
 MODULE_DESCRIPTION("Glue layer for OneNAND flash on generic boards");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 9f322f1a7f2..d945473c388 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -25,7 +25,6 @@
 
 #include <linux/device.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/onenand.h>
 #include <linux/mtd/partitions.h>
@@ -35,34 +34,33 @@
 #include <linux/dma-mapping.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/regulator/consumer.h>
 
 #include <asm/mach/flash.h>
-#include <plat/gpmc.h>
-#include <plat/onenand.h>
-#include <mach/gpio.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
+#include <asm/gpio.h>
 
-#include <plat/dma.h>
-
-#include <plat/board.h>
+#include <linux/omap-dma.h>
 
 #define DRIVER_NAME "omap2-onenand"
 
-#define ONENAND_IO_SIZE		SZ_128K
 #define ONENAND_BUFRAM_SIZE	(1024 * 5)
 
 struct omap2_onenand {
 	struct platform_device *pdev;
 	int gpmc_cs;
 	unsigned long phys_base;
+	unsigned int mem_size;
 	int gpio_irq;
 	struct mtd_info mtd;
-	struct mtd_partition *parts;
 	struct onenand_chip onenand;
 	struct completion irq_done;
 	struct completion dma_done;
 	int dma_channel;
 	int freq;
-	int (*setup)(void __iomem *base, int freq);
+	int (*setup)(void __iomem *base, int *freq_ptr);
+	struct regulator *regulator;
+	u8 flags;
 };
 
 static void omap2_onenand_dma_cb(int lch, u16 ch_status, void *data)
@@ -108,8 +106,9 @@ static void wait_warn(char *msg, int state, unsigned int ctrl,
 static int omap2_onenand_wait(struct mtd_info *mtd, int state)
 {
 	struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
+	struct onenand_chip *this = mtd->priv;
 	unsigned int intr = 0;
-	unsigned int ctrl;
+	unsigned int ctrl, ctrl_mask;
 	unsigned long timeout;
 	u32 syscfg;
 
@@ -141,11 +140,9 @@ static int omap2_onenand_wait(struct mtd_info *mtd, int state)
 			wait_err("controller error", state, ctrl, intr);
 			return -EIO;
 		}
-		if ((intr & intr_flags) != intr_flags) {
-			wait_err("timeout", state, ctrl, intr);
-			return -EIO;
-		}
-		return 0;
+		if ((intr & intr_flags) == intr_flags)
+			return 0;
+		/* Continue in wait for interrupt branch */
 	}
 
 	if (state != FL_READING) {
@@ -156,12 +153,12 @@ static int omap2_onenand_wait(struct mtd_info *mtd, int state)
 		if (!(syscfg & ONENAND_SYS_CFG1_IOBE)) {
 			syscfg |= ONENAND_SYS_CFG1_IOBE;
 			write_reg(c, syscfg, ONENAND_REG_SYS_CFG1);
-			if (cpu_is_omap34xx())
+			if (c->flags & ONENAND_IN_OMAP34XX)
 				/* Add a delay to let GPIO settle */
 				syscfg = read_reg(c, ONENAND_REG_SYS_CFG1);
 		}
 
-		INIT_COMPLETION(c->irq_done);
+		reinit_completion(&c->irq_done);
 		if (c->gpio_irq) {
 			result = gpio_get_value(c->gpio_irq);
 			if (result == -1) {
@@ -180,7 +177,8 @@ retry:
 			if (result == 0) {
 				/* Timeout after 20ms */
 				ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
-				if (ctrl & ONENAND_CTRL_ONGO) {
+				if (ctrl & ONENAND_CTRL_ONGO &&
+				    !this->ongoing) {
 					/*
 					 * The operation seems to be still going
 					 * so give it some more time.
@@ -269,7 +267,11 @@ retry:
 		return -EIO;
 	}
 
-	if (ctrl & 0xFE9F)
+	ctrl_mask = 0xFE9F;
+	if (this->ongoing)
+		ctrl_mask &= ~0x8000;
+
+	if (ctrl & ctrl_mask)
 		wait_warn("unexpected controller status", state, ctrl, intr);
 
 	return 0;
@@ -346,7 +348,7 @@ static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area,
 	omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
 				 dma_dst, 0, 0);
 
-	INIT_COMPLETION(c->dma_done);
+	reinit_completion(&c->dma_done);
 	omap_start_dma(c->dma_channel);
 
 	timeout = jiffies + msecs_to_jiffies(20);
@@ -417,7 +419,7 @@ static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area,
 	omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
 				 dma_dst, 0, 0);
 
-	INIT_COMPLETION(c->dma_done);
+	reinit_completion(&c->dma_done);
 	omap_start_dma(c->dma_channel);
 
 	timeout = jiffies + msecs_to_jiffies(20);
@@ -442,13 +444,19 @@ out_copy:
 
 #else
 
-int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area,
-				 unsigned char *buffer, int offset,
-				 size_t count);
+static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area,
+					unsigned char *buffer, int offset,
+					size_t count)
+{
+	return -ENOSYS;
+}
 
-int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area,
-				  const unsigned char *buffer,
-				  int offset, size_t count);
+static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area,
+					 const unsigned char *buffer,
+					 int offset, size_t count)
+{
+	return -ENOSYS;
+}
 
 #endif
 
@@ -490,7 +498,7 @@ static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area,
 	omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
 				 dma_dst, 0, 0);
 
-	INIT_COMPLETION(c->dma_done);
+	reinit_completion(&c->dma_done);
 	omap_start_dma(c->dma_channel);
 	wait_for_completion(&c->dma_done);
 
@@ -535,7 +543,7 @@ static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
 	omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
 				 dma_dst, 0, 0);
 
-	INIT_COMPLETION(c->dma_done);
+	reinit_completion(&c->dma_done);
 	omap_start_dma(c->dma_channel);
 	wait_for_completion(&c->dma_done);
 
@@ -546,58 +554,69 @@ static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
 
 #else
 
-int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area,
-				 unsigned char *buffer, int offset,
-				 size_t count);
+static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area,
+					unsigned char *buffer, int offset,
+					size_t count)
+{
+	return -ENOSYS;
+}
 
-int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
-				  const unsigned char *buffer,
-				  int offset, size_t count);
+static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
+					 const unsigned char *buffer,
+					 int offset, size_t count)
+{
+	return -ENOSYS;
+}
 
 #endif
 
 static struct platform_driver omap2_onenand_driver;
 
-static int __adjust_timing(struct device *dev, void *data)
+static void omap2_onenand_shutdown(struct platform_device *pdev)
 {
-	int ret = 0;
-	struct omap2_onenand *c;
+	struct omap2_onenand *c = dev_get_drvdata(&pdev->dev);
 
-	c = dev_get_drvdata(dev);
+	/* With certain content in the buffer RAM, the OMAP boot ROM code
+	 * can recognize the flash chip incorrectly. Zero it out before
+	 * soft reset.
+	 */
+	memset((__force void *)c->onenand.base, 0, ONENAND_BUFRAM_SIZE);
+}
 
-	BUG_ON(c->setup == NULL);
+static int omap2_onenand_enable(struct mtd_info *mtd)
+{
+	int ret;
+	struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
 
-	/* DMA is not in use so this is all that is needed */
-	/* Revisit for OMAP3! */
-	ret = c->setup(c->onenand.base, c->freq);
+	ret = regulator_enable(c->regulator);
+	if (ret != 0)
+		dev_err(&c->pdev->dev, "can't enable regulator\n");
 
 	return ret;
 }
 
-int omap2_onenand_rephase(void)
+static int omap2_onenand_disable(struct mtd_info *mtd)
 {
-	return driver_for_each_device(&omap2_onenand_driver.driver, NULL,
-				      NULL, __adjust_timing);
-}
+	int ret;
+	struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
 
-static void omap2_onenand_shutdown(struct platform_device *pdev)
-{
-	struct omap2_onenand *c = dev_get_drvdata(&pdev->dev);
+	ret = regulator_disable(c->regulator);
+	if (ret != 0)
+		dev_err(&c->pdev->dev, "can't disable regulator\n");
 
-	/* With certain content in the buffer RAM, the OMAP boot ROM code
-	 * can recognize the flash chip incorrectly. Zero it out before
-	 * soft reset.
-	 */
-	memset((__force void *)c->onenand.base, 0, ONENAND_BUFRAM_SIZE);
+	return ret;
 }
 
-static int __devinit omap2_onenand_probe(struct platform_device *pdev)
+static int omap2_onenand_probe(struct platform_device *pdev)
 {
 	struct omap_onenand_platform_data *pdata;
 	struct omap2_onenand *c;
+	struct onenand_chip *this;
 	int r;
+	struct resource *res;
+	struct mtd_part_parser_data ppdata = {};
 
-	pdata = pdev->dev.platform_data;
+	pdata = dev_get_platdata(&pdev->dev);
 	if (pdata == NULL) {
 		dev_err(&pdev->dev, "platform data missing\n");
 		return -ENODEV;
@@ -609,6 +628,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
 
 	init_completion(&c->irq_done);
 	init_completion(&c->dma_done);
+	c->flags = pdata->flags;
 	c->gpmc_cs = pdata->cs;
 	c->gpio_irq = pdata->gpio_irq;
 	c->dma_channel = pdata->dma_channel;
@@ -617,27 +637,31 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
 		c->gpio_irq = 0;
 	}
 
-	r = gpmc_cs_request(c->gpmc_cs, ONENAND_IO_SIZE, &c->phys_base);
-	if (r < 0) {
-		dev_err(&pdev->dev, "Cannot request GPMC CS\n");
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		r = -EINVAL;
+		dev_err(&pdev->dev, "error getting memory resource\n");
 		goto err_kfree;
 	}
 
-	if (request_mem_region(c->phys_base, ONENAND_IO_SIZE,
+	c->phys_base = res->start;
+	c->mem_size = resource_size(res);
+
+	if (request_mem_region(c->phys_base, c->mem_size,
 			       pdev->dev.driver->name) == NULL) {
-		dev_err(&pdev->dev, "Cannot reserve memory region at 0x%08lx, "
-			"size: 0x%x\n",	c->phys_base, ONENAND_IO_SIZE);
+		dev_err(&pdev->dev, "Cannot reserve memory region at 0x%08lx, size: 0x%x\n",
+						c->phys_base, c->mem_size);
 		r = -EBUSY;
-		goto err_free_cs;
+		goto err_kfree;
 	}
-	c->onenand.base = ioremap(c->phys_base, ONENAND_IO_SIZE);
+	c->onenand.base = ioremap(c->phys_base, c->mem_size);
 	if (c->onenand.base == NULL) {
 		r = -ENOMEM;
 		goto err_release_mem_region;
 	}
 
 	if (pdata->onenand_setup != NULL) {
-		r = pdata->onenand_setup(c->onenand.base, c->freq);
+		r = pdata->onenand_setup(c->onenand.base, &c->freq);
 		if (r < 0) {
 			dev_err(&pdev->dev, "Onenand platform setup failed: "
 				"%d\n", r);
@@ -682,8 +706,8 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
 	}
 
 	dev_info(&pdev->dev, "initializing on CS%d, phys base 0x%08lx, virtual "
-		 "base %p\n", c->gpmc_cs, c->phys_base,
-		 c->onenand.base);
+		 "base %p, freq %d MHz\n", c->gpmc_cs, c->phys_base,
+		 c->onenand.base, c->freq);
 
 	c->pdev = pdev;
 	c->mtd.name = dev_name(&pdev->dev);
@@ -692,11 +716,10 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
 
 	c->mtd.dev.parent = &pdev->dev;
 
+	this = &c->onenand;
 	if (c->dma_channel >= 0) {
-		struct onenand_chip *this = &c->onenand;
-
 		this->wait = omap2_onenand_wait;
-		if (cpu_is_omap34xx()) {
+		if (c->flags & ONENAND_IN_OMAP34XX) {
 			this->read_bufferram = omap3_onenand_read_bufferram;
 			this->write_bufferram = omap3_onenand_write_bufferram;
 		} else {
@@ -705,32 +728,28 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
 		}
 	}
 
-	if ((r = onenand_scan(&c->mtd, 1)) < 0)
-		goto err_release_dma;
-
-	switch ((c->onenand.version_id >> 4) & 0xf) {
-	case 0:
-		c->freq = 40;
-		break;
-	case 1:
-		c->freq = 54;
-		break;
-	case 2:
-		c->freq = 66;
-		break;
-	case 3:
-		c->freq = 83;
-		break;
+	if (pdata->regulator_can_sleep) {
+		c->regulator = regulator_get(&pdev->dev, "vonenand");
+		if (IS_ERR(c->regulator)) {
+			dev_err(&pdev->dev,  "Failed to get regulator\n");
+			r = PTR_ERR(c->regulator);
+			goto err_release_dma;
+		}
+		c->onenand.enable = omap2_onenand_enable;
+		c->onenand.disable = omap2_onenand_disable;
 	}
 
-#ifdef CONFIG_MTD_PARTITIONS
-	if (pdata->parts != NULL)
-		r = add_mtd_partitions(&c->mtd, pdata->parts,
-				       pdata->nr_parts);
-	else
-#endif
-		r = add_mtd_device(&c->mtd);
-	if (r < 0)
+	if (pdata->skip_initial_unlocking)
+		this->options |= ONENAND_SKIP_INITIAL_UNLOCKING;
+
+	if ((r = onenand_scan(&c->mtd, 1)) < 0)
+		goto err_release_regulator;
+
+	ppdata.of_node = pdata->of_node;
+	r = mtd_device_parse_register(&c->mtd, NULL, &ppdata,
+				      pdata ? pdata->parts : NULL,
+				      pdata ? pdata->nr_parts : 0);
+	if (r)
 		goto err_release_onenand;
 
 	platform_set_drvdata(pdev, c);
@@ -739,6 +758,8 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
 
 err_release_onenand:
 	onenand_release(&c->mtd);
+err_release_regulator:
+	regulator_put(c->regulator);
 err_release_dma:
 	if (c->dma_channel != -1)
 		omap_free_dma(c->dma_channel);
@@ -750,42 +771,28 @@ err_release_gpio:
 err_iounmap:
 	iounmap(c->onenand.base);
 err_release_mem_region:
-	release_mem_region(c->phys_base, ONENAND_IO_SIZE);
-err_free_cs:
-	gpmc_cs_free(c->gpmc_cs);
+	release_mem_region(c->phys_base, c->mem_size);
 err_kfree:
 	kfree(c);
 
 	return r;
 }
 
-static int __devexit omap2_onenand_remove(struct platform_device *pdev)
+static int omap2_onenand_remove(struct platform_device *pdev)
 {
 	struct omap2_onenand *c = dev_get_drvdata(&pdev->dev);
 
-	BUG_ON(c == NULL);
-
-#ifdef CONFIG_MTD_PARTITIONS
-	if (c->parts)
-		del_mtd_partitions(&c->mtd);
-	else
-		del_mtd_device(&c->mtd);
-#else
-	del_mtd_device(&c->mtd);
-#endif
-
 	onenand_release(&c->mtd);
+	regulator_put(c->regulator);
 	if (c->dma_channel != -1)
 		omap_free_dma(c->dma_channel);
 	omap2_onenand_shutdown(pdev);
-	platform_set_drvdata(pdev, NULL);
 	if (c->gpio_irq) {
 		free_irq(gpio_to_irq(c->gpio_irq), c);
 		gpio_free(c->gpio_irq);
 	}
 	iounmap(c->onenand.base);
-	release_mem_region(c->phys_base, ONENAND_IO_SIZE);
-	gpmc_cs_free(c->gpmc_cs);
+	release_mem_region(c->phys_base, c->mem_size);
 	kfree(c);
 
 	return 0;
@@ -793,7 +800,7 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev)
 
 static struct platform_driver omap2_onenand_driver = {
 	.probe		= omap2_onenand_probe,
-	.remove		= __devexit_p(omap2_onenand_remove),
+	.remove		= omap2_onenand_remove,
 	.shutdown	= omap2_onenand_shutdown,
 	.driver		= {
 		.name	= DRIVER_NAME,
@@ -801,21 +808,9 @@ static struct platform_driver omap2_onenand_driver = {
 	},
 };
 
-static int __init omap2_onenand_init(void)
-{
-	printk(KERN_INFO "OneNAND driver initializing\n");
-	return platform_driver_register(&omap2_onenand_driver);
-}
-
-static void __exit omap2_onenand_exit(void)
-{
-	platform_driver_unregister(&omap2_onenand_driver);
-}
-
-module_init(omap2_onenand_init);
-module_exit(omap2_onenand_exit);
+module_platform_driver(omap2_onenand_driver);
 
-MODULE_ALIAS(DRIVER_NAME);
+MODULE_ALIAS("platform:" DRIVER_NAME);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Jarkko Lavinen <jarkko.lavinen@nokia.com>");
 MODULE_DESCRIPTION("Glue layer for OneNAND flash on OMAP2 / OMAP3");
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 26caf2590da..635ee002769 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -24,7 +24,6 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/slab.h>
-#include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
@@ -65,11 +64,11 @@ MODULE_PARM_DESC(otp,	"Corresponding behaviour of OneNAND in OTP"
 			"	   : 2 -> 1st Block lock"
 			"	   : 3 -> BOTH OTP Block and 1st Block lock");
 
-/**
- *  onenand_oob_128 - oob info for Flex-Onenand with 4KB page
- *  For now, we expose only 64 out of 80 ecc bytes
+/*
+ * flexonenand_oob_128 - oob info for Flex-Onenand with 4KB page
+ * For now, we expose only 64 out of 80 ecc bytes
  */
-static struct nand_ecclayout onenand_oob_128 = {
+static struct nand_ecclayout flexonenand_oob_128 = {
 	.eccbytes	= 64,
 	.eccpos		= {
 		6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
@@ -86,6 +85,35 @@ static struct nand_ecclayout onenand_oob_128 = {
 	}
 };
 
+/*
+ * onenand_oob_128 - oob info for OneNAND with 4KB page
+ *
+ * Based on specification:
+ * 4Gb M-die OneNAND Flash (KFM4G16Q4M, KFN8G16Q4M). Rev. 1.3, Apr. 2010
+ *
+ * For eccpos we expose only 64 bytes out of 72 (see struct nand_ecclayout)
+ *
+ * oobfree uses the spare area fields marked as
+ * "Managed by internal ECC logic for Logical Sector Number area"
+ */
+static struct nand_ecclayout onenand_oob_128 = {
+	.eccbytes	= 64,
+	.eccpos		= {
+		7, 8, 9, 10, 11, 12, 13, 14, 15,
+		23, 24, 25, 26, 27, 28, 29, 30, 31,
+		39, 40, 41, 42, 43, 44, 45, 46, 47,
+		55, 56, 57, 58, 59, 60, 61, 62, 63,
+		71, 72, 73, 74, 75, 76, 77, 78, 79,
+		87, 88, 89, 90, 91, 92, 93, 94, 95,
+		103, 104, 105, 106, 107, 108, 109, 110, 111,
+		119
+	},
+	.oobfree	= {
+		{2, 3}, {18, 3}, {34, 3}, {50, 3},
+		{66, 3}, {82, 3}, {98, 3}, {114, 3}
+	}
+};
+
 /**
  * onenand_oob_64 - oob info for large (2KB) page
  */
@@ -377,8 +405,11 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le
 
 	default:
 		block = onenand_block(this, addr);
-		page = (int) (addr - onenand_addr(this, block)) >> this->page_shift;
-
+		if (FLEXONENAND(this))
+			page = (int) (addr - onenand_addr(this, block))>>\
+				this->page_shift;
+		else
+			page = (int) (addr >> this->page_shift);
 		if (ONENAND_IS_2PLANE(this)) {
 			/* Make the even block number */
 			block &= ~1;
@@ -397,8 +428,7 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le
 		value = onenand_bufferram_address(this, block);
 		this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
 
-		if (ONENAND_IS_MLC(this) || ONENAND_IS_2PLANE(this) ||
-		    ONENAND_IS_4KB_PAGE(this))
+		if (ONENAND_IS_2PLANE(this) || ONENAND_IS_4KB_PAGE(this))
 			/* It is always BufferRAM0 */
 			ONENAND_SET_BUFFERRAM0(this);
 		else
@@ -427,7 +457,7 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le
 		case FLEXONENAND_CMD_RECOVER_LSB:
 		case ONENAND_CMD_READ:
 		case ONENAND_CMD_READOOB:
-			if (ONENAND_IS_MLC(this) || ONENAND_IS_4KB_PAGE(this))
+			if (ONENAND_IS_4KB_PAGE(this))
 				/* It is always BufferRAM0 */
 				dataram = ONENAND_SET_BUFFERRAM0(this);
 			else
@@ -946,6 +976,8 @@ static int onenand_get_device(struct mtd_info *mtd, int new_state)
 		if (this->state == FL_READY) {
 			this->state = new_state;
 			spin_unlock(&this->chip_lock);
+			if (new_state != FL_PM_SUSPENDED && this->enable)
+				this->enable(mtd);
 			break;
 		}
 		if (new_state == FL_PM_SUSPENDED) {
@@ -972,6 +1004,8 @@ static void onenand_release_device(struct mtd_info *mtd)
 {
 	struct onenand_chip *this = mtd->priv;
 
+	if (this->state != FL_PM_SUSPENDED && this->disable)
+		this->disable(mtd);
 	/* Release the chip */
 	spin_lock(&this->chip_lock);
 	this->state = FL_READY;
@@ -980,7 +1014,7 @@ static void onenand_release_device(struct mtd_info *mtd)
 }
 
 /**
- * onenand_transfer_auto_oob - [Internal] oob auto-placement transfer
+ * onenand_transfer_auto_oob - [INTERN] oob auto-placement transfer
  * @param mtd		MTD device structure
  * @param buf		destination address
  * @param column	oob offset to read from
@@ -1044,7 +1078,7 @@ static int onenand_recover_lsb(struct mtd_info *mtd, loff_t addr, int status)
 		return status;
 
 	/* check if we failed due to uncorrectable error */
-	if (status != -EBADMSG && status != ONENAND_BBT_READ_ECC_ERROR)
+	if (!mtd_is_eccerr(status) && status != ONENAND_BBT_READ_ECC_ERROR)
 		return status;
 
 	/* check if address lies in MLC region */
@@ -1087,10 +1121,10 @@ static int onenand_mlc_read_ops_nolock(struct mtd_info *mtd, loff_t from,
 	int ret = 0;
 	int writesize = this->writesize;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08x, len = %i\n",
-	      __func__, (unsigned int) from, (int) len);
+	pr_debug("%s: from = 0x%08x, len = %i\n", __func__, (unsigned int)from,
+			(int)len);
 
-	if (ops->mode == MTD_OOB_AUTO)
+	if (ops->mode == MTD_OPS_AUTO_OOB)
 		oobsize = this->ecclayout->oobavail;
 	else
 		oobsize = mtd->oobsize;
@@ -1124,8 +1158,10 @@ static int onenand_mlc_read_ops_nolock(struct mtd_info *mtd, loff_t from,
 			if (unlikely(ret))
 				ret = onenand_recover_lsb(mtd, from, ret);
 			onenand_update_bufferram(mtd, from, !ret);
-			if (ret == -EBADMSG)
+			if (mtd_is_eccerr(ret))
 				ret = 0;
+			if (ret)
+				break;
 		}
 
 		this->read_bufferram(mtd, ONENAND_DATARAM, buf, column, thislen);
@@ -1133,7 +1169,7 @@ static int onenand_mlc_read_ops_nolock(struct mtd_info *mtd, loff_t from,
 			thisooblen = oobsize - oobcolumn;
 			thisooblen = min_t(int, thisooblen, ooblen - oobread);
 
-			if (ops->mode == MTD_OOB_AUTO)
+			if (ops->mode == MTD_OPS_AUTO_OOB)
 				onenand_transfer_auto_oob(mtd, oobbuf, oobcolumn, thisooblen);
 			else
 				this->read_bufferram(mtd, ONENAND_SPARERAM, oobbuf, oobcolumn, thisooblen);
@@ -1164,7 +1200,8 @@ static int onenand_mlc_read_ops_nolock(struct mtd_info *mtd, loff_t from,
 	if (mtd->ecc_stats.failed - stats.failed)
 		return -EBADMSG;
 
-	return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0;
+	/* return max bitflips per ecc step; ONENANDs correct 1 bit only */
+	return mtd->ecc_stats.corrected != stats.corrected ? 1 : 0;
 }
 
 /**
@@ -1189,10 +1226,10 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
 	int ret = 0, boundary = 0;
 	int writesize = this->writesize;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08x, len = %i\n",
-			__func__, (unsigned int) from, (int) len);
+	pr_debug("%s: from = 0x%08x, len = %i\n", __func__, (unsigned int)from,
+			(int)len);
 
-	if (ops->mode == MTD_OOB_AUTO)
+	if (ops->mode == MTD_OPS_AUTO_OOB)
 		oobsize = this->ecclayout->oobavail;
 	else
 		oobsize = mtd->oobsize;
@@ -1218,7 +1255,7 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
 			this->command(mtd, ONENAND_CMD_READ, from, writesize);
  			ret = this->wait(mtd, FL_READING);
  			onenand_update_bufferram(mtd, from, !ret);
-			if (ret == -EBADMSG)
+			if (mtd_is_eccerr(ret))
 				ret = 0;
  		}
  	}
@@ -1254,7 +1291,7 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
 			thisooblen = oobsize - oobcolumn;
 			thisooblen = min_t(int, thisooblen, ooblen - oobread);
 
-			if (ops->mode == MTD_OOB_AUTO)
+			if (ops->mode == MTD_OPS_AUTO_OOB)
 				onenand_transfer_auto_oob(mtd, oobbuf, oobcolumn, thisooblen);
 			else
 				this->read_bufferram(mtd, ONENAND_SPARERAM, oobbuf, oobcolumn, thisooblen);
@@ -1278,7 +1315,7 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
  		/* Now wait for load */
  		ret = this->wait(mtd, FL_READING);
  		onenand_update_bufferram(mtd, from, !ret);
-		if (ret == -EBADMSG)
+		if (mtd_is_eccerr(ret))
 			ret = 0;
  	}
 
@@ -1296,7 +1333,8 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
 	if (mtd->ecc_stats.failed - stats.failed)
 		return -EBADMSG;
 
-	return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0;
+	/* return max bitflips per ecc step; ONENANDs correct 1 bit only */
+	return mtd->ecc_stats.corrected != stats.corrected ? 1 : 0;
 }
 
 /**
@@ -1314,19 +1352,19 @@ static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from,
 	struct mtd_ecc_stats stats;
 	int read = 0, thislen, column, oobsize;
 	size_t len = ops->ooblen;
-	mtd_oob_mode_t mode = ops->mode;
+	unsigned int mode = ops->mode;
 	u_char *buf = ops->oobbuf;
 	int ret = 0, readcmd;
 
 	from += ops->ooboffs;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08x, len = %i\n",
-		__func__, (unsigned int) from, (int) len);
+	pr_debug("%s: from = 0x%08x, len = %i\n", __func__, (unsigned int)from,
+			(int)len);
 
 	/* Initialize return length value */
 	ops->oobretlen = 0;
 
-	if (mode == MTD_OOB_AUTO)
+	if (mode == MTD_OPS_AUTO_OOB)
 		oobsize = this->ecclayout->oobavail;
 	else
 		oobsize = mtd->oobsize;
@@ -1350,7 +1388,7 @@ static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from,
 
 	stats = mtd->ecc_stats;
 
-	readcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB;
+	readcmd = ONENAND_IS_4KB_PAGE(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB;
 
 	while (read < len) {
 		cond_resched();
@@ -1366,13 +1404,13 @@ static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from,
 		if (unlikely(ret))
 			ret = onenand_recover_lsb(mtd, from, ret);
 
-		if (ret && ret != -EBADMSG) {
+		if (ret && !mtd_is_eccerr(ret)) {
 			printk(KERN_ERR "%s: read failed = 0x%x\n",
 				__func__, ret);
 			break;
 		}
 
-		if (mode == MTD_OOB_AUTO)
+		if (mode == MTD_OPS_AUTO_OOB)
 			onenand_transfer_auto_oob(mtd, buf, column, thislen);
 		else
 			this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen);
@@ -1426,7 +1464,7 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
 	int ret;
 
 	onenand_get_device(mtd, FL_READING);
-	ret = ONENAND_IS_MLC(this) || ONENAND_IS_4KB_PAGE(this) ?
+	ret = ONENAND_IS_4KB_PAGE(this) ?
 		onenand_mlc_read_ops_nolock(mtd, from, &ops) :
 		onenand_read_ops_nolock(mtd, from, &ops);
 	onenand_release_device(mtd);
@@ -1450,10 +1488,10 @@ static int onenand_read_oob(struct mtd_info *mtd, loff_t from,
 	int ret;
 
 	switch (ops->mode) {
-	case MTD_OOB_PLACE:
-	case MTD_OOB_AUTO:
+	case MTD_OPS_PLACE_OOB:
+	case MTD_OPS_AUTO_OOB:
 		break;
-	case MTD_OOB_RAW:
+	case MTD_OPS_RAW:
 		/* Not implemented yet */
 	default:
 		return -EINVAL;
@@ -1461,7 +1499,7 @@ static int onenand_read_oob(struct mtd_info *mtd, loff_t from,
 
 	onenand_get_device(mtd, FL_READING);
 	if (ops->datbuf)
-		ret = ONENAND_IS_MLC(this) || ONENAND_IS_4KB_PAGE(this) ?
+		ret = ONENAND_IS_4KB_PAGE(this) ?
 			onenand_mlc_read_ops_nolock(mtd, from, ops) :
 			onenand_read_ops_nolock(mtd, from, ops);
 	else
@@ -1482,8 +1520,7 @@ static int onenand_bbt_wait(struct mtd_info *mtd, int state)
 {
 	struct onenand_chip *this = mtd->priv;
 	unsigned long timeout;
-	unsigned int interrupt;
-	unsigned int ctrl;
+	unsigned int interrupt, ctrl, ecc, addr1, addr8;
 
 	/* The 20 msec is enough */
 	timeout = jiffies + msecs_to_jiffies(20);
@@ -1495,25 +1532,28 @@ static int onenand_bbt_wait(struct mtd_info *mtd, int state)
 	/* To get correct interrupt status in timeout case */
 	interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
 	ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
+	addr1 = this->read_word(this->base + ONENAND_REG_START_ADDRESS1);
+	addr8 = this->read_word(this->base + ONENAND_REG_START_ADDRESS8);
 
 	if (interrupt & ONENAND_INT_READ) {
-		int ecc = onenand_read_ecc(this);
+		ecc = onenand_read_ecc(this);
 		if (ecc & ONENAND_ECC_2BIT_ALL) {
-			printk(KERN_WARNING "%s: ecc error = 0x%04x, "
-				"controller error 0x%04x\n",
-				__func__, ecc, ctrl);
+			printk(KERN_DEBUG "%s: ecc 0x%04x ctrl 0x%04x "
+			       "intr 0x%04x addr1 %#x addr8 %#x\n",
+			       __func__, ecc, ctrl, interrupt, addr1, addr8);
 			return ONENAND_BBT_READ_ECC_ERROR;
 		}
 	} else {
-		printk(KERN_ERR "%s: read timeout! ctrl=0x%04x intr=0x%04x\n",
-			__func__, ctrl, interrupt);
+		printk(KERN_ERR "%s: read timeout! ctrl 0x%04x "
+		       "intr 0x%04x addr1 %#x addr8 %#x\n",
+		       __func__, ctrl, interrupt, addr1, addr8);
 		return ONENAND_BBT_READ_FATAL_ERROR;
 	}
 
 	/* Initial bad block case: 0x2400 or 0x0400 */
 	if (ctrl & ONENAND_CTRL_ERROR) {
-		printk(KERN_DEBUG "%s: controller error = 0x%04x\n",
-			__func__, ctrl);
+		printk(KERN_DEBUG "%s: ctrl 0x%04x intr 0x%04x addr1 %#x "
+		       "addr8 %#x\n", __func__, ctrl, interrupt, addr1, addr8);
 		return ONENAND_BBT_READ_ERROR;
 	}
 
@@ -1537,8 +1577,8 @@ int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
 	size_t len = ops->ooblen;
 	u_char *buf = ops->oobbuf;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08x, len = %zi\n",
-		__func__, (unsigned int) from, len);
+	pr_debug("%s: from = 0x%08x, len = %zi\n", __func__, (unsigned int)from,
+			len);
 
 	/* Initialize return value */
 	ops->oobretlen = 0;
@@ -1555,7 +1595,7 @@ int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
 
 	column = from & (mtd->oobsize - 1);
 
-	readcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB;
+	readcmd = ONENAND_IS_4KB_PAGE(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB;
 
 	while (read < len) {
 		cond_resched();
@@ -1609,7 +1649,7 @@ static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to
 	u_char *oob_buf = this->oob_buf;
 	int status, i, readcmd;
 
-	readcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB;
+	readcmd = ONENAND_IS_4KB_PAGE(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB;
 
 	this->command(mtd, readcmd, to, mtd->oobsize);
 	onenand_update_bufferram(mtd, to, 0);
@@ -1638,11 +1678,10 @@ static int onenand_verify(struct mtd_info *mtd, const u_char *buf, loff_t addr,
 	int ret = 0;
 	int thislen, column;
 
+	column = addr & (this->writesize - 1);
+
 	while (len != 0) {
-		thislen = min_t(int, this->writesize, len);
-		column = addr & (this->writesize - 1);
-		if (column + thislen > this->writesize)
-			thislen = this->writesize - column;
+		thislen = min_t(int, this->writesize - column, len);
 
 		this->command(mtd, ONENAND_CMD_READ, addr, this->writesize);
 
@@ -1656,12 +1695,13 @@ static int onenand_verify(struct mtd_info *mtd, const u_char *buf, loff_t addr,
 
 		this->read_bufferram(mtd, ONENAND_DATARAM, this->verify_buf, 0, mtd->writesize);
 
-		if (memcmp(buf, this->verify_buf, thislen))
+		if (memcmp(buf, this->verify_buf + column, thislen))
 			return -EBADMSG;
 
 		len -= thislen;
 		buf += thislen;
 		addr += thislen;
+		column = 0;
 	}
 
 	return 0;
@@ -1711,18 +1751,8 @@ static int onenand_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
 	/* Wait for any existing operation to clear */
 	onenand_panic_wait(mtd);
 
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
-		__func__, (unsigned int) to, (int) len);
-
-	/* Initialize retlen, in case of early exit */
-	*retlen = 0;
-
-	/* Do not allow writes past end of device */
-	if (unlikely((to + len) > mtd->size)) {
-		printk(KERN_ERR "%s: Attempt write to past end of device\n",
-			__func__);
-		return -EINVAL;
-	}
+	pr_debug("%s: to = 0x%08x, len = %i\n", __func__, (unsigned int)to,
+			(int)len);
 
 	/* Reject writes, which are not page aligned */
         if (unlikely(NOTALIGNED(to) || NOTALIGNED(len))) {
@@ -1782,7 +1812,7 @@ static int onenand_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
 }
 
 /**
- * onenand_fill_auto_oob - [Internal] oob auto-placement transfer
+ * onenand_fill_auto_oob - [INTERN] oob auto-placement transfer
  * @param mtd		MTD device structure
  * @param oob_buf	oob buffer
  * @param buf		source address
@@ -1842,22 +1872,15 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
 	const u_char *buf = ops->datbuf;
 	const u_char *oob = ops->oobbuf;
 	u_char *oobbuf;
-	int ret = 0;
+	int ret = 0, cmd;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
-		__func__, (unsigned int) to, (int) len);
+	pr_debug("%s: to = 0x%08x, len = %i\n", __func__, (unsigned int)to,
+			(int)len);
 
 	/* Initialize retlen, in case of early exit */
 	ops->retlen = 0;
 	ops->oobretlen = 0;
 
-	/* Do not allow writes past end of device */
-	if (unlikely((to + len) > mtd->size)) {
-		printk(KERN_ERR "%s: Attempt write to past end of device\n",
-			__func__);
-		return -EINVAL;
-	}
-
 	/* Reject writes, which are not page aligned */
         if (unlikely(NOTALIGNED(to) || NOTALIGNED(len))) {
 		printk(KERN_ERR "%s: Attempt to write not page aligned data\n",
@@ -1869,7 +1892,7 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
 	if (!len)
 		return 0;
 
-	if (ops->mode == MTD_OOB_AUTO)
+	if (ops->mode == MTD_OPS_AUTO_OOB)
 		oobsize = this->ecclayout->oobavail;
 	else
 		oobsize = mtd->oobsize;
@@ -1906,7 +1929,7 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
 				/* We send data to spare ram with oobsize
 				 * to prevent byte access */
 				memset(oobbuf, 0xff, mtd->oobsize);
-				if (ops->mode == MTD_OOB_AUTO)
+				if (ops->mode == MTD_OPS_AUTO_OOB)
 					onenand_fill_auto_oob(mtd, oobbuf, oob, oobcolumn, thisooblen);
 				else
 					memcpy(oobbuf + oobcolumn, oob, thisooblen);
@@ -1951,7 +1974,19 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
 			ONENAND_SET_NEXT_BUFFERRAM(this);
 		}
 
-		this->command(mtd, ONENAND_CMD_PROG, to, mtd->writesize);
+		this->ongoing = 0;
+		cmd = ONENAND_CMD_PROG;
+
+		/* Exclude 1st OTP and OTP blocks for cache program feature */
+		if (ONENAND_IS_CACHE_PROGRAM(this) &&
+		    likely(onenand_block(this, to) != 0) &&
+		    ONENAND_IS_4KB_PAGE(this) &&
+		    ((written + thislen) < len)) {
+			cmd = ONENAND_CMD_2X_CACHE_PROG;
+			this->ongoing = 1;
+		}
+
+		this->command(mtd, cmd, to, mtd->writesize);
 
 		/*
 		 * 2 PLANE, MLC, and Flex-OneNAND wait here
@@ -2004,7 +2039,7 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
 
 
 /**
- * onenand_write_oob_nolock - [Internal] OneNAND write out-of-band
+ * onenand_write_oob_nolock - [INTERN] OneNAND write out-of-band
  * @param mtd		MTD device structure
  * @param to		offset to write to
  * @param len		number of bytes to write
@@ -2023,17 +2058,17 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to,
 	u_char *oobbuf;
 	size_t len = ops->ooblen;
 	const u_char *buf = ops->oobbuf;
-	mtd_oob_mode_t mode = ops->mode;
+	unsigned int mode = ops->mode;
 
 	to += ops->ooboffs;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
-		__func__, (unsigned int) to, (int) len);
+	pr_debug("%s: to = 0x%08x, len = %i\n", __func__, (unsigned int)to,
+			(int)len);
 
 	/* Initialize retlen, in case of early exit */
 	ops->oobretlen = 0;
 
-	if (mode == MTD_OOB_AUTO)
+	if (mode == MTD_OPS_AUTO_OOB)
 		oobsize = this->ecclayout->oobavail;
 	else
 		oobsize = mtd->oobsize;
@@ -2064,7 +2099,7 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to,
 
 	oobbuf = this->oob_buf;
 
-	oobcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_PROG : ONENAND_CMD_PROGOOB;
+	oobcmd = ONENAND_IS_4KB_PAGE(this) ? ONENAND_CMD_PROG : ONENAND_CMD_PROGOOB;
 
 	/* Loop until all data write */
 	while (written < len) {
@@ -2077,13 +2112,13 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to,
 		/* We send data to spare ram with oobsize
 		 * to prevent byte access */
 		memset(oobbuf, 0xff, mtd->oobsize);
-		if (mode == MTD_OOB_AUTO)
+		if (mode == MTD_OPS_AUTO_OOB)
 			onenand_fill_auto_oob(mtd, oobbuf, buf, column, thislen);
 		else
 			memcpy(oobbuf + column, buf, thislen);
 		this->write_bufferram(mtd, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize);
 
-		if (ONENAND_IS_MLC(this) || ONENAND_IS_4KB_PAGE(this)) {
+		if (ONENAND_IS_4KB_PAGE(this)) {
 			/* Set main area of DataRAM to 0xff*/
 			memset(this->page_buf, 0xff, mtd->writesize);
 			this->write_bufferram(mtd, ONENAND_DATARAM,
@@ -2166,10 +2201,10 @@ static int onenand_write_oob(struct mtd_info *mtd, loff_t to,
 	int ret;
 
 	switch (ops->mode) {
-	case MTD_OOB_PLACE:
-	case MTD_OOB_AUTO:
+	case MTD_OPS_PLACE_OOB:
+	case MTD_OPS_AUTO_OOB:
 		break;
-	case MTD_OOB_RAW:
+	case MTD_OPS_RAW:
 		/* Not implemented yet */
 	default:
 		return -EINVAL;
@@ -2230,7 +2265,7 @@ static int onenand_multiblock_erase_verify(struct mtd_info *mtd,
 }
 
 /**
- * onenand_multiblock_erase - [Internal] erase block(s) using multiblock erase
+ * onenand_multiblock_erase - [INTERN] erase block(s) using multiblock erase
  * @param mtd		MTD device structure
  * @param instr		erase instruction
  * @param region	erase region
@@ -2346,7 +2381,7 @@ static int onenand_multiblock_erase(struct mtd_info *mtd,
 
 
 /**
- * onenand_block_by_block_erase - [Internal] erase block(s) using regular erase
+ * onenand_block_by_block_erase - [INTERN] erase block(s) using regular erase
  * @param mtd		MTD device structure
  * @param instr		erase instruction
  * @param region	erase region
@@ -2402,7 +2437,7 @@ static int onenand_block_by_block_erase(struct mtd_info *mtd,
 		len -= block_size;
 		addr += block_size;
 
-		if (addr == region_end) {
+		if (region && addr == region_end) {
 			if (!len)
 				break;
 			region++;
@@ -2438,14 +2473,9 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
 	struct mtd_erase_region_info *region = NULL;
 	loff_t region_offset = 0;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: start=0x%012llx, len=%llu\n", __func__,
-	      (unsigned long long) instr->addr, (unsigned long long) instr->len);
-
-	/* Do not allow erase past end of device */
-	if (unlikely((len + addr) > mtd->size)) {
-		printk(KERN_ERR "%s: Erase past end of device\n", __func__);
-		return -EINVAL;
-	}
+	pr_debug("%s: start=0x%012llx, len=%llu\n", __func__,
+			(unsigned long long)instr->addr,
+			(unsigned long long)instr->len);
 
 	if (FLEXONENAND(this)) {
 		/* Find the eraseregion of this address */
@@ -2473,12 +2503,11 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
 		return -EINVAL;
 	}
 
-	instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
-
 	/* Grab the lock and see if the device is available */
 	onenand_get_device(mtd, FL_ERASING);
 
-	if (region || instr->len < MB_ERASE_MIN_BLK_COUNT * block_size) {
+	if (ONENAND_IS_4KB_PAGE(this) || region ||
+	    instr->len < MB_ERASE_MIN_BLK_COUNT * block_size) {
 		/* region is set for Flex-OneNAND (no mb erase) */
 		ret = onenand_block_by_block_erase(mtd, instr,
 						   region, block_size);
@@ -2506,7 +2535,7 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
  */
 static void onenand_sync(struct mtd_info *mtd)
 {
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: called\n", __func__);
+	pr_debug("%s: called\n", __func__);
 
 	/* Grab the lock and see if the device is available */
 	onenand_get_device(mtd, FL_SYNCING);
@@ -2526,10 +2555,6 @@ static int onenand_block_isbad(struct mtd_info *mtd, loff_t ofs)
 {
 	int ret;
 
-	/* Check for invalid offset */
-	if (ofs > mtd->size)
-		return -EINVAL;
-
 	onenand_get_device(mtd, FL_READING);
 	ret = onenand_block_isbad_nolock(mtd, ofs, 0);
 	onenand_release_device(mtd);
@@ -2550,7 +2575,7 @@ static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
 	struct bbm_info *bbm = this->bbm;
 	u_char buf[2] = {0, 0};
 	struct mtd_oob_ops ops = {
-		.mode = MTD_OOB_PLACE,
+		.mode = MTD_OPS_PLACE_OOB,
 		.ooblen = 2,
 		.oobbuf = buf,
 		.ooboffs = 0,
@@ -2580,7 +2605,6 @@ static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
  */
 static int onenand_block_markbad(struct mtd_info *mtd, loff_t ofs)
 {
-	struct onenand_chip *this = mtd->priv;
 	int ret;
 
 	ret = onenand_block_isbad(mtd, ofs);
@@ -2592,7 +2616,7 @@ static int onenand_block_markbad(struct mtd_info *mtd, loff_t ofs)
 	}
 
 	onenand_get_device(mtd, FL_WRITING);
-	ret = this->block_markbad(mtd, ofs);
+	ret = mtd_block_markbad(mtd, ofs);
 	onenand_release_device(mtd);
 	return ret;
 }
@@ -2870,7 +2894,7 @@ static int onenand_otp_command(struct mtd_info *mtd, int cmd, loff_t addr,
 }
 
 /**
- * onenand_otp_write_oob_nolock - [Internal] OneNAND write out-of-band, specific to OTP
+ * onenand_otp_write_oob_nolock - [INTERN] OneNAND write out-of-band, specific to OTP
  * @param mtd		MTD device structure
  * @param to		offset to write to
  * @param len		number of bytes to write
@@ -3026,7 +3050,7 @@ static int do_otp_read(struct mtd_info *mtd, loff_t from, size_t len,
 	this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
 	this->wait(mtd, FL_OTPING);
 
-	ret = ONENAND_IS_MLC(this) || ONENAND_IS_4KB_PAGE(this) ?
+	ret = ONENAND_IS_4KB_PAGE(this) ?
 		onenand_mlc_read_ops_nolock(mtd, from, &ops) :
 		onenand_read_ops_nolock(mtd, from, &ops);
 
@@ -3118,7 +3142,7 @@ static int do_otp_lock(struct mtd_info *mtd, loff_t from, size_t len,
 		this->command(mtd, ONENAND_CMD_RESET, 0, 0);
 		this->wait(mtd, FL_RESETING);
 	} else {
-		ops.mode = MTD_OOB_PLACE;
+		ops.mode = MTD_OPS_PLACE_OOB;
 		ops.ooblen = len;
 		ops.oobbuf = buf;
 		ops.ooboffs = 0;
@@ -3213,20 +3237,17 @@ static int onenand_otp_walk(struct mtd_info *mtd, loff_t from, size_t len,
 /**
  * onenand_get_fact_prot_info - [MTD Interface] Read factory OTP info
  * @param mtd		MTD device structure
- * @param buf		the databuffer to put/get data
  * @param len		number of bytes to read
+ * @param retlen	pointer to variable to store the number of read bytes
+ * @param buf		the databuffer to put/get data
  *
  * Read factory OTP info.
  */
-static int onenand_get_fact_prot_info(struct mtd_info *mtd,
-			struct otp_info *buf, size_t len)
+static int onenand_get_fact_prot_info(struct mtd_info *mtd, size_t len,
+				      size_t *retlen, struct otp_info *buf)
 {
-	size_t retlen;
-	int ret;
-
-	ret = onenand_otp_walk(mtd, 0, len, &retlen, (u_char *) buf, NULL, MTD_OTP_FACTORY);
-
-	return ret ? : retlen;
+	return onenand_otp_walk(mtd, 0, len, retlen, (u_char *) buf, NULL,
+				MTD_OTP_FACTORY);
 }
 
 /**
@@ -3248,20 +3269,17 @@ static int onenand_read_fact_prot_reg(struct mtd_info *mtd, loff_t from,
 /**
  * onenand_get_user_prot_info - [MTD Interface] Read user OTP info
  * @param mtd		MTD device structure
- * @param buf		the databuffer to put/get data
+ * @param retlen	pointer to variable to store the number of read bytes
  * @param len		number of bytes to read
+ * @param buf		the databuffer to put/get data
  *
  * Read user OTP info.
  */
-static int onenand_get_user_prot_info(struct mtd_info *mtd,
-			struct otp_info *buf, size_t len)
+static int onenand_get_user_prot_info(struct mtd_info *mtd, size_t len,
+				      size_t *retlen, struct otp_info *buf)
 {
-	size_t retlen;
-	int ret;
-
-	ret = onenand_otp_walk(mtd, 0, len, &retlen, (u_char *) buf, NULL, MTD_OTP_USER);
-
-	return ret ? : retlen;
+	return onenand_otp_walk(mtd, 0, len, retlen, (u_char *) buf, NULL,
+				MTD_OTP_USER);
 }
 
 /**
@@ -3362,19 +3380,35 @@ static int onenand_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,
 static void onenand_check_features(struct mtd_info *mtd)
 {
 	struct onenand_chip *this = mtd->priv;
-	unsigned int density, process;
+	unsigned int density, process, numbufs;
 
 	/* Lock scheme depends on density and process */
 	density = onenand_get_density(this->device_id);
 	process = this->version_id >> ONENAND_VERSION_PROCESS_SHIFT;
+	numbufs = this->read_word(this->base + ONENAND_REG_NUM_BUFFERS) >> 8;
 
 	/* Lock scheme */
 	switch (density) {
 	case ONENAND_DEVICE_DENSITY_4Gb:
 		if (ONENAND_IS_DDP(this))
 			this->options |= ONENAND_HAS_2PLANE;
-		else
+		else if (numbufs == 1) {
 			this->options |= ONENAND_HAS_4KB_PAGE;
+			this->options |= ONENAND_HAS_CACHE_PROGRAM;
+			/*
+			 * There are two different 4KiB pagesize chips
+			 * and no way to detect it by H/W config values.
+			 *
+			 * To detect the correct NOP for each chips,
+			 * It should check the version ID as workaround.
+			 *
+			 * Now it has as following
+			 * KFM4G16Q4M has NOP 4 with version ID 0x0131
+			 * KFM4G16Q5M has NOP 1 with versoin ID 0x013e
+			 */
+			if ((this->version_id & 0xf) == 0xe)
+				this->options |= ONENAND_HAS_NOP_1;
+		}
 
 	case ONENAND_DEVICE_DENSITY_2Gb:
 		/* 2Gb DDP does not have 2 plane */
@@ -3395,7 +3429,11 @@ static void onenand_check_features(struct mtd_info *mtd)
 		break;
 	}
 
-	if (ONENAND_IS_MLC(this) || ONENAND_IS_4KB_PAGE(this))
+	/* The MLC has 4KiB pagesize. */
+	if (ONENAND_IS_MLC(this))
+		this->options |= ONENAND_HAS_4KB_PAGE;
+
+	if (ONENAND_IS_4KB_PAGE(this))
 		this->options &= ~ONENAND_HAS_2PLANE;
 
 	if (FLEXONENAND(this)) {
@@ -3411,6 +3449,8 @@ static void onenand_check_features(struct mtd_info *mtd)
 		printk(KERN_DEBUG "Chip has 2 plane\n");
 	if (this->options & ONENAND_HAS_4KB_PAGE)
 		printk(KERN_DEBUG "Chip has 4KiB pagesize\n");
+	if (this->options & ONENAND_HAS_CACHE_PROGRAM)
+		printk(KERN_DEBUG "Chip has cache program feature\n");
 }
 
 /**
@@ -3478,7 +3518,7 @@ static int flexonenand_get_boundary(struct mtd_info *mtd)
 {
 	struct onenand_chip *this = mtd->priv;
 	unsigned die, bdry;
-	int ret, syscfg, locked;
+	int syscfg, locked;
 
 	/* Disable ECC */
 	syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1);
@@ -3489,7 +3529,7 @@ static int flexonenand_get_boundary(struct mtd_info *mtd)
 		this->wait(mtd, FL_SYNCING);
 
 		this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0);
-		ret = this->wait(mtd, FL_READING);
+		this->wait(mtd, FL_READING);
 
 		bdry = this->read_word(this->base + ONENAND_DATARAM);
 		if ((bdry >> FLEXONENAND_PI_UNLOCK_SHIFT) == 3)
@@ -3499,7 +3539,7 @@ static int flexonenand_get_boundary(struct mtd_info *mtd)
 		this->boundary[die] = bdry & FLEXONENAND_PI_MASK;
 
 		this->command(mtd, ONENAND_CMD_RESET, 0, 0);
-		ret = this->wait(mtd, FL_RESETING);
+		this->wait(mtd, FL_RESETING);
 
 		printk(KERN_INFO "Die %d boundary: %d%s\n", die,
 		       this->boundary[die], locked ? "(Locked)" : "(Unlocked)");
@@ -3602,7 +3642,7 @@ static int flexonenand_check_blocks_erased(struct mtd_info *mtd, int start, int
 	int i, ret;
 	int block;
 	struct mtd_oob_ops ops = {
-		.mode = MTD_OOB_PLACE,
+		.mode = MTD_OPS_PLACE_OOB,
 		.ooboffs = 0,
 		.ooblen	= mtd->oobsize,
 		.datbuf	= NULL,
@@ -3643,7 +3683,7 @@ static int flexonenand_check_blocks_erased(struct mtd_info *mtd, int start, int
  * flexonenand_set_boundary	- Writes the SLC boundary
  * @param mtd			- mtd info structure
  */
-int flexonenand_set_boundary(struct mtd_info *mtd, int die,
+static int flexonenand_set_boundary(struct mtd_info *mtd, int die,
 				    int boundary, int lock)
 {
 	struct onenand_chip *this = mtd->priv;
@@ -3683,7 +3723,7 @@ int flexonenand_set_boundary(struct mtd_info *mtd, int die,
 
 	/* Check is boundary is locked */
 	this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0);
-	ret = this->wait(mtd, FL_READING);
+	this->wait(mtd, FL_READING);
 
 	thisboundary = this->read_word(this->base + ONENAND_DATARAM);
 	if ((thisboundary >> FLEXONENAND_PI_UNLOCK_SHIFT) != 3) {
@@ -3730,17 +3770,16 @@ out:
 }
 
 /**
- * onenand_probe - [OneNAND Interface] Probe the OneNAND device
+ * onenand_chip_probe - [OneNAND Interface] The generic chip probe
  * @param mtd		MTD device structure
  *
  * OneNAND detection method:
  *   Compare the values from command with ones from register
  */
-static int onenand_probe(struct mtd_info *mtd)
+static int onenand_chip_probe(struct mtd_info *mtd)
 {
 	struct onenand_chip *this = mtd->priv;
-	int bram_maf_id, bram_dev_id, maf_id, dev_id, ver_id;
-	int density;
+	int bram_maf_id, bram_dev_id, maf_id, dev_id;
 	int syscfg;
 
 	/* Save system configuration 1 */
@@ -3763,12 +3802,6 @@ static int onenand_probe(struct mtd_info *mtd)
 	/* Restore system configuration 1 */
 	this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1);
 
-	/* Workaround */
-	if (syscfg & ONENAND_SYS_CFG1_SYNC_WRITE) {
-		bram_maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID);
-		bram_dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
-	}
-
 	/* Check manufacturer ID */
 	if (onenand_check_maf(bram_maf_id))
 		return -ENXIO;
@@ -3776,13 +3809,34 @@ static int onenand_probe(struct mtd_info *mtd)
 	/* Read manufacturer and device IDs from Register */
 	maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID);
 	dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
-	ver_id = this->read_word(this->base + ONENAND_REG_VERSION_ID);
-	this->technology = this->read_word(this->base + ONENAND_REG_TECHNOLOGY);
 
 	/* Check OneNAND device */
 	if (maf_id != bram_maf_id || dev_id != bram_dev_id)
 		return -ENXIO;
 
+	return 0;
+}
+
+/**
+ * onenand_probe - [OneNAND Interface] Probe the OneNAND device
+ * @param mtd		MTD device structure
+ */
+static int onenand_probe(struct mtd_info *mtd)
+{
+	struct onenand_chip *this = mtd->priv;
+	int dev_id, ver_id;
+	int density;
+	int ret;
+
+	ret = this->chip_probe(mtd);
+	if (ret)
+		return ret;
+
+	/* Device and version IDs from Register */
+	dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
+	ver_id = this->read_word(this->base + ONENAND_REG_VERSION_ID);
+	this->technology = this->read_word(this->base + ONENAND_REG_TECHNOLOGY);
+
 	/* Flash device information */
 	onenand_print_device_info(dev_id, ver_id);
 	this->device_id = dev_id;
@@ -3812,7 +3866,7 @@ static int onenand_probe(struct mtd_info *mtd)
 	/* The data buffer size is equal to page size */
 	mtd->writesize = this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE);
 	/* We use the full BufferRAM */
-	if (ONENAND_IS_MLC(this) || ONENAND_IS_4KB_PAGE(this))
+	if (ONENAND_IS_4KB_PAGE(this))
 		mtd->writesize <<= 1;
 
 	mtd->oobsize = mtd->writesize >> 5;
@@ -3909,6 +3963,9 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
 	if (!this->unlock_all)
 		this->unlock_all = onenand_unlock_all;
 
+	if (!this->chip_probe)
+		this->chip_probe = onenand_chip_probe;
+
 	if (!this->read_bufferram)
 		this->read_bufferram = onenand_read_bufferram;
 	if (!this->write_bufferram)
@@ -3931,11 +3988,8 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
 	/* Allocate buffers, if necessary */
 	if (!this->page_buf) {
 		this->page_buf = kzalloc(mtd->writesize, GFP_KERNEL);
-		if (!this->page_buf) {
-			printk(KERN_ERR "%s: Can't allocate page_buf\n",
-				__func__);
+		if (!this->page_buf)
 			return -ENOMEM;
-		}
 #ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE
 		this->verify_buf = kzalloc(mtd->writesize, GFP_KERNEL);
 		if (!this->verify_buf) {
@@ -3948,8 +4002,6 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
 	if (!this->oob_buf) {
 		this->oob_buf = kzalloc(mtd->oobsize, GFP_KERNEL);
 		if (!this->oob_buf) {
-			printk(KERN_ERR "%s: Can't allocate oob_buf\n",
-				__func__);
 			if (this->options & ONENAND_PAGEBUF_ALLOC) {
 				this->options &= ~ONENAND_PAGEBUF_ALLOC;
 				kfree(this->page_buf);
@@ -3968,8 +4020,15 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
 	 */
 	switch (mtd->oobsize) {
 	case 128:
-		this->ecclayout = &onenand_oob_128;
-		mtd->subpage_sft = 0;
+		if (FLEXONENAND(this)) {
+			this->ecclayout = &flexonenand_oob_128;
+			mtd->subpage_sft = 0;
+		} else {
+			this->ecclayout = &onenand_oob_128;
+			mtd->subpage_sft = 2;
+		}
+		if (ONENAND_IS_NOP_1(this))
+			mtd->subpage_sft = 0;
 		break;
 	case 64:
 		this->ecclayout = &onenand_oob_64;
@@ -4004,37 +4063,40 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
 	mtd->oobavail = this->ecclayout->oobavail;
 
 	mtd->ecclayout = this->ecclayout;
+	mtd->ecc_strength = 1;
 
 	/* Fill in remaining MTD driver data */
-	mtd->type = MTD_NANDFLASH;
+	mtd->type = ONENAND_IS_MLC(this) ? MTD_MLCNANDFLASH : MTD_NANDFLASH;
 	mtd->flags = MTD_CAP_NANDFLASH;
-	mtd->erase = onenand_erase;
-	mtd->point = NULL;
-	mtd->unpoint = NULL;
-	mtd->read = onenand_read;
-	mtd->write = onenand_write;
-	mtd->read_oob = onenand_read_oob;
-	mtd->write_oob = onenand_write_oob;
-	mtd->panic_write = onenand_panic_write;
+	mtd->_erase = onenand_erase;
+	mtd->_point = NULL;
+	mtd->_unpoint = NULL;
+	mtd->_read = onenand_read;
+	mtd->_write = onenand_write;
+	mtd->_read_oob = onenand_read_oob;
+	mtd->_write_oob = onenand_write_oob;
+	mtd->_panic_write = onenand_panic_write;
 #ifdef CONFIG_MTD_ONENAND_OTP
-	mtd->get_fact_prot_info = onenand_get_fact_prot_info;
-	mtd->read_fact_prot_reg = onenand_read_fact_prot_reg;
-	mtd->get_user_prot_info = onenand_get_user_prot_info;
-	mtd->read_user_prot_reg = onenand_read_user_prot_reg;
-	mtd->write_user_prot_reg = onenand_write_user_prot_reg;
-	mtd->lock_user_prot_reg = onenand_lock_user_prot_reg;
+	mtd->_get_fact_prot_info = onenand_get_fact_prot_info;
+	mtd->_read_fact_prot_reg = onenand_read_fact_prot_reg;
+	mtd->_get_user_prot_info = onenand_get_user_prot_info;
+	mtd->_read_user_prot_reg = onenand_read_user_prot_reg;
+	mtd->_write_user_prot_reg = onenand_write_user_prot_reg;
+	mtd->_lock_user_prot_reg = onenand_lock_user_prot_reg;
 #endif
-	mtd->sync = onenand_sync;
-	mtd->lock = onenand_lock;
-	mtd->unlock = onenand_unlock;
-	mtd->suspend = onenand_suspend;
-	mtd->resume = onenand_resume;
-	mtd->block_isbad = onenand_block_isbad;
-	mtd->block_markbad = onenand_block_markbad;
+	mtd->_sync = onenand_sync;
+	mtd->_lock = onenand_lock;
+	mtd->_unlock = onenand_unlock;
+	mtd->_suspend = onenand_suspend;
+	mtd->_resume = onenand_resume;
+	mtd->_block_isbad = onenand_block_isbad;
+	mtd->_block_markbad = onenand_block_markbad;
 	mtd->owner = THIS_MODULE;
+	mtd->writebufsize = mtd->writesize;
 
 	/* Unlock whole block */
-	this->unlock_all(mtd);
+	if (!(this->options & ONENAND_SKIP_INITIAL_UNLOCKING))
+		this->unlock_all(mtd);
 
 	ret = this->scan_bbt(mtd);
 	if ((!FLEXONENAND(this)) || ret)
@@ -4056,12 +4118,8 @@ void onenand_release(struct mtd_info *mtd)
 {
 	struct onenand_chip *this = mtd->priv;
 
-#ifdef CONFIG_MTD_PARTITIONS
 	/* Deregister partitions */
-	del_mtd_partitions (mtd);
-#endif
-	/* Deregister the device */
-	del_mtd_device (mtd);
+	mtd_device_unregister(mtd);
 
 	/* Free bad block table memory, if allocated */
 	if (this->bbm) {
diff --git a/drivers/mtd/onenand/onenand_bbt.c b/drivers/mtd/onenand/onenand_bbt.c
index a91fcac1af0..08d0085f3e9 100644
--- a/drivers/mtd/onenand/onenand_bbt.c
+++ b/drivers/mtd/onenand/onenand_bbt.c
@@ -15,7 +15,7 @@
 #include <linux/slab.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/onenand.h>
-#include <linux/mtd/compatmac.h>
+#include <linux/export.h>
 
 /**
  * check_short_pattern - [GENERIC] check if a pattern is in the buffer
@@ -81,7 +81,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
 	startblock = 0;
 	from = 0;
 
-	ops.mode = MTD_OOB_PLACE;
+	ops.mode = MTD_OPS_PLACE_OOB;
 	ops.ooblen = readlen;
 	ops.oobbuf = buf;
 	ops.len = ops.ooboffs = ops.retlen = ops.oobretlen = 0;
@@ -92,16 +92,18 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
 		for (j = 0; j < len; j++) {
 			/* No need to read pages fully,
 			 * just read required OOB bytes */
-			ret = onenand_bbt_read_oob(mtd, from + j * mtd->writesize + bd->offs, &ops);
+			ret = onenand_bbt_read_oob(mtd,
+				from + j * this->writesize + bd->offs, &ops);
 
 			/* If it is a initial bad block, just ignore it */
 			if (ret == ONENAND_BBT_READ_FATAL_ERROR)
 				return -EIO;
 
-			if (ret || check_short_pattern(&buf[j * scanlen], scanlen, mtd->writesize, bd)) {
+			if (ret || check_short_pattern(&buf[j * scanlen],
+					       scanlen, this->writesize, bd)) {
 				bbm->bbt[i >> 3] |= 0x03 << (i & 0x6);
-				printk(KERN_WARNING "Bad eraseblock %d at 0x%08x\n",
-					i >> 1, (unsigned int) from);
+				printk(KERN_INFO "OneNAND eraseblock %d is an "
+					"initial bad block\n", i >> 1);
 				mtd->ecc_stats.badblocks++;
 				break;
 			}
@@ -131,7 +133,6 @@ static inline int onenand_memory_bbt (struct mtd_info *mtd, struct nand_bbt_desc
 {
 	struct onenand_chip *this = mtd->priv;
 
-        bd->options &= ~NAND_BBT_SCANEMPTY;
 	return create_bbt(mtd, this->page_buf, bd, -1);
 }
 
@@ -152,7 +153,7 @@ static int onenand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
 	block = (int) (onenand_block(this, offs) << 1);
 	res = (bbm->bbt[block >> 3] >> (block & 0x06)) & 0x03;
 
-	DEBUG(MTD_DEBUG_LEVEL2, "onenand_isbad_bbt: bbt info for offs 0x%08x: (block %d) 0x%02x\n",
+	pr_debug("onenand_isbad_bbt: bbt info for offs 0x%08x: (block %d) 0x%02x\n",
 		(unsigned int) offs, block >> 1, res);
 
 	switch ((int) res) {
@@ -187,10 +188,8 @@ int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
 	len = this->chipsize >> (this->erase_shift + 2);
 	/* Allocate memory (2bit per block) and clear the memory bad block table */
 	bbm->bbt = kzalloc(len, GFP_KERNEL);
-	if (!bbm->bbt) {
-		printk(KERN_ERR "onenand_scan_bbt: Out of memory\n");
+	if (!bbm->bbt)
 		return -ENOMEM;
-	}
 
 	/* Set the bad block position */
 	bbm->badblockpos = ONENAND_BADBLOCK_POS;
diff --git a/drivers/mtd/onenand/onenand_sim.c b/drivers/mtd/onenand/onenand_sim.c
deleted file mode 100644
index 8b246061d51..00000000000
--- a/drivers/mtd/onenand/onenand_sim.c
+++ /dev/null
@@ -1,563 +0,0 @@
-/*
- *  linux/drivers/mtd/onenand/onenand_sim.c
- *
- *  The OneNAND simulator
- *
- *  Copyright © 2005-2007 Samsung Electronics
- *  Kyungmin Park <kyungmin.park@samsung.com>
- *
- *  Vishak G <vishak.g at samsung.com>, Rohit Hagargundgi <h.rohit at samsung.com>
- *  Flex-OneNAND simulator support
- *  Copyright (C) Samsung Electronics, 2008
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/vmalloc.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/onenand.h>
-
-#include <linux/io.h>
-
-#ifndef CONFIG_ONENAND_SIM_MANUFACTURER
-#define CONFIG_ONENAND_SIM_MANUFACTURER         0xec
-#endif
-
-#ifndef CONFIG_ONENAND_SIM_DEVICE_ID
-#define CONFIG_ONENAND_SIM_DEVICE_ID            0x04
-#endif
-
-#define CONFIG_FLEXONENAND ((CONFIG_ONENAND_SIM_DEVICE_ID >> 9) & 1)
-
-#ifndef CONFIG_ONENAND_SIM_VERSION_ID
-#define CONFIG_ONENAND_SIM_VERSION_ID           0x1e
-#endif
-
-#ifndef CONFIG_ONENAND_SIM_TECHNOLOGY_ID
-#define CONFIG_ONENAND_SIM_TECHNOLOGY_ID CONFIG_FLEXONENAND
-#endif
-
-/* Initial boundary values for Flex-OneNAND Simulator */
-#ifndef CONFIG_FLEXONENAND_SIM_DIE0_BOUNDARY
-#define CONFIG_FLEXONENAND_SIM_DIE0_BOUNDARY	0x01
-#endif
-
-#ifndef CONFIG_FLEXONENAND_SIM_DIE1_BOUNDARY
-#define CONFIG_FLEXONENAND_SIM_DIE1_BOUNDARY	0x01
-#endif
-
-static int manuf_id	= CONFIG_ONENAND_SIM_MANUFACTURER;
-static int device_id	= CONFIG_ONENAND_SIM_DEVICE_ID;
-static int version_id	= CONFIG_ONENAND_SIM_VERSION_ID;
-static int technology_id = CONFIG_ONENAND_SIM_TECHNOLOGY_ID;
-static int boundary[] = {
-	CONFIG_FLEXONENAND_SIM_DIE0_BOUNDARY,
-	CONFIG_FLEXONENAND_SIM_DIE1_BOUNDARY,
-};
-
-struct onenand_flash {
-	void __iomem *base;
-	void __iomem *data;
-};
-
-#define ONENAND_CORE(flash)		(flash->data)
-#define ONENAND_CORE_SPARE(flash, this, offset)				\
-	((flash->data) + (this->chipsize) + (offset >> 5))
-
-#define ONENAND_MAIN_AREA(this, offset)					\
-	(this->base + ONENAND_DATARAM + offset)
-
-#define ONENAND_SPARE_AREA(this, offset)				\
-	(this->base + ONENAND_SPARERAM + offset)
-
-#define ONENAND_GET_WP_STATUS(this)					\
-	(readw(this->base + ONENAND_REG_WP_STATUS))
-
-#define ONENAND_SET_WP_STATUS(v, this)					\
-	(writew(v, this->base + ONENAND_REG_WP_STATUS))
-
-/* It has all 0xff chars */
-#define MAX_ONENAND_PAGESIZE		(4096 + 128)
-static unsigned char *ffchars;
-
-#if CONFIG_FLEXONENAND
-#define PARTITION_NAME "Flex-OneNAND simulator partition"
-#else
-#define PARTITION_NAME "OneNAND simulator partition"
-#endif
-
-static struct mtd_partition os_partitions[] = {
-	{
-		.name		= PARTITION_NAME,
-		.offset		= 0,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-/*
- * OneNAND simulator mtd
- */
-struct onenand_info {
-	struct mtd_info		mtd;
-	struct mtd_partition	*parts;
-	struct onenand_chip	onenand;
-	struct onenand_flash	flash;
-};
-
-static struct onenand_info *info;
-
-#define DPRINTK(format, args...)					\
-do {									\
-	printk(KERN_DEBUG "%s[%d]: " format "\n", __func__,		\
-			   __LINE__, ##args);				\
-} while (0)
-
-/**
- * onenand_lock_handle - Handle Lock scheme
- * @this:		OneNAND device structure
- * @cmd:		The command to be sent
- *
- * Send lock command to OneNAND device.
- * The lock scheme depends on chip type.
- */
-static void onenand_lock_handle(struct onenand_chip *this, int cmd)
-{
-	int block_lock_scheme;
-	int status;
-
-	status = ONENAND_GET_WP_STATUS(this);
-	block_lock_scheme = !(this->options & ONENAND_HAS_CONT_LOCK);
-
-	switch (cmd) {
-	case ONENAND_CMD_UNLOCK:
-	case ONENAND_CMD_UNLOCK_ALL:
-		if (block_lock_scheme)
-			ONENAND_SET_WP_STATUS(ONENAND_WP_US, this);
-		else
-			ONENAND_SET_WP_STATUS(status | ONENAND_WP_US, this);
-		break;
-
-	case ONENAND_CMD_LOCK:
-		if (block_lock_scheme)
-			ONENAND_SET_WP_STATUS(ONENAND_WP_LS, this);
-		else
-			ONENAND_SET_WP_STATUS(status | ONENAND_WP_LS, this);
-		break;
-
-	case ONENAND_CMD_LOCK_TIGHT:
-		if (block_lock_scheme)
-			ONENAND_SET_WP_STATUS(ONENAND_WP_LTS, this);
-		else
-			ONENAND_SET_WP_STATUS(status | ONENAND_WP_LTS, this);
-		break;
-
-	default:
-		break;
-	}
-}
-
-/**
- * onenand_bootram_handle - Handle BootRAM area
- * @this:		OneNAND device structure
- * @cmd:		The command to be sent
- *
- * Emulate BootRAM area. It is possible to do basic operation using BootRAM.
- */
-static void onenand_bootram_handle(struct onenand_chip *this, int cmd)
-{
-	switch (cmd) {
-	case ONENAND_CMD_READID:
-		writew(manuf_id, this->base);
-		writew(device_id, this->base + 2);
-		writew(version_id, this->base + 4);
-		break;
-
-	default:
-		/* REVIST: Handle other commands */
-		break;
-	}
-}
-
-/**
- * onenand_update_interrupt - Set interrupt register
- * @this:         OneNAND device structure
- * @cmd:          The command to be sent
- *
- * Update interrupt register. The status depends on command.
- */
-static void onenand_update_interrupt(struct onenand_chip *this, int cmd)
-{
-	int interrupt = ONENAND_INT_MASTER;
-
-	switch (cmd) {
-	case ONENAND_CMD_READ:
-	case ONENAND_CMD_READOOB:
-		interrupt |= ONENAND_INT_READ;
-		break;
-
-	case ONENAND_CMD_PROG:
-	case ONENAND_CMD_PROGOOB:
-		interrupt |= ONENAND_INT_WRITE;
-		break;
-
-	case ONENAND_CMD_ERASE:
-		interrupt |= ONENAND_INT_ERASE;
-		break;
-
-	case ONENAND_CMD_RESET:
-		interrupt |= ONENAND_INT_RESET;
-		break;
-
-	default:
-		break;
-	}
-
-	writew(interrupt, this->base + ONENAND_REG_INTERRUPT);
-}
-
-/**
- * onenand_check_overwrite - Check if over-write happened
- * @dest:		The destination pointer
- * @src:		The source pointer
- * @count:		The length to be check
- *
- * Returns:		0 on same, otherwise 1
- *
- * Compare the source with destination
- */
-static int onenand_check_overwrite(void *dest, void *src, size_t count)
-{
-	unsigned int *s = (unsigned int *) src;
-	unsigned int *d = (unsigned int *) dest;
-	int i;
-
-	count >>= 2;
-	for (i = 0; i < count; i++)
-		if ((*s++ ^ *d++) != 0)
-			return 1;
-
-	return 0;
-}
-
-/**
- * onenand_data_handle - Handle OneNAND Core and DataRAM
- * @this:		OneNAND device structure
- * @cmd:		The command to be sent
- * @dataram:		Which dataram used
- * @offset:		The offset to OneNAND Core
- *
- * Copy data from OneNAND Core to DataRAM (read)
- * Copy data from DataRAM to OneNAND Core (write)
- * Erase the OneNAND Core (erase)
- */
-static void onenand_data_handle(struct onenand_chip *this, int cmd,
-				int dataram, unsigned int offset)
-{
-	struct mtd_info *mtd = &info->mtd;
-	struct onenand_flash *flash = this->priv;
-	int main_offset, spare_offset, die = 0;
-	void __iomem *src;
-	void __iomem *dest;
-	unsigned int i;
-	static int pi_operation;
-	int erasesize, rgn;
-
-	if (dataram) {
-		main_offset = mtd->writesize;
-		spare_offset = mtd->oobsize;
-	} else {
-		main_offset = 0;
-		spare_offset = 0;
-	}
-
-	if (pi_operation) {
-		die = readw(this->base + ONENAND_REG_START_ADDRESS2);
-		die >>= ONENAND_DDP_SHIFT;
-	}
-
-	switch (cmd) {
-	case FLEXONENAND_CMD_PI_ACCESS:
-		pi_operation = 1;
-		break;
-
-	case ONENAND_CMD_RESET:
-		pi_operation = 0;
-		break;
-
-	case ONENAND_CMD_READ:
-		src = ONENAND_CORE(flash) + offset;
-		dest = ONENAND_MAIN_AREA(this, main_offset);
-		if (pi_operation) {
-			writew(boundary[die], this->base + ONENAND_DATARAM);
-			break;
-		}
-		memcpy(dest, src, mtd->writesize);
-		/* Fall through */
-
-	case ONENAND_CMD_READOOB:
-		src = ONENAND_CORE_SPARE(flash, this, offset);
-		dest = ONENAND_SPARE_AREA(this, spare_offset);
-		memcpy(dest, src, mtd->oobsize);
-		break;
-
-	case ONENAND_CMD_PROG:
-		src = ONENAND_MAIN_AREA(this, main_offset);
-		dest = ONENAND_CORE(flash) + offset;
-		if (pi_operation) {
-			boundary[die] = readw(this->base + ONENAND_DATARAM);
-			break;
-		}
-		/* To handle partial write */
-		for (i = 0; i < (1 << mtd->subpage_sft); i++) {
-			int off = i * this->subpagesize;
-			if (!memcmp(src + off, ffchars, this->subpagesize))
-				continue;
-			if (memcmp(dest + off, ffchars, this->subpagesize) &&
-			    onenand_check_overwrite(dest + off, src + off, this->subpagesize))
-				printk(KERN_ERR "over-write happend at 0x%08x\n", offset);
-			memcpy(dest + off, src + off, this->subpagesize);
-		}
-		/* Fall through */
-
-	case ONENAND_CMD_PROGOOB:
-		src = ONENAND_SPARE_AREA(this, spare_offset);
-		/* Check all data is 0xff chars */
-		if (!memcmp(src, ffchars, mtd->oobsize))
-			break;
-
-		dest = ONENAND_CORE_SPARE(flash, this, offset);
-		if (memcmp(dest, ffchars, mtd->oobsize) &&
-		    onenand_check_overwrite(dest, src, mtd->oobsize))
-			printk(KERN_ERR "OOB: over-write happend at 0x%08x\n",
-			       offset);
-		memcpy(dest, src, mtd->oobsize);
-		break;
-
-	case ONENAND_CMD_ERASE:
-		if (pi_operation)
-			break;
-
-		if (FLEXONENAND(this)) {
-			rgn = flexonenand_region(mtd, offset);
-			erasesize = mtd->eraseregions[rgn].erasesize;
-		} else
-			erasesize = mtd->erasesize;
-
-		memset(ONENAND_CORE(flash) + offset, 0xff, erasesize);
-		memset(ONENAND_CORE_SPARE(flash, this, offset), 0xff,
-		       (erasesize >> 5));
-		break;
-
-	default:
-		break;
-	}
-}
-
-/**
- * onenand_command_handle - Handle command
- * @this:		OneNAND device structure
- * @cmd:		The command to be sent
- *
- * Emulate OneNAND command.
- */
-static void onenand_command_handle(struct onenand_chip *this, int cmd)
-{
-	unsigned long offset = 0;
-	int block = -1, page = -1, bufferram = -1;
-	int dataram = 0;
-
-	switch (cmd) {
-	case ONENAND_CMD_UNLOCK:
-	case ONENAND_CMD_LOCK:
-	case ONENAND_CMD_LOCK_TIGHT:
-	case ONENAND_CMD_UNLOCK_ALL:
-		onenand_lock_handle(this, cmd);
-		break;
-
-	case ONENAND_CMD_BUFFERRAM:
-		/* Do nothing */
-		return;
-
-	default:
-		block = (int) readw(this->base + ONENAND_REG_START_ADDRESS1);
-		if (block & (1 << ONENAND_DDP_SHIFT)) {
-			block &= ~(1 << ONENAND_DDP_SHIFT);
-			/* The half of chip block */
-			block += this->chipsize >> (this->erase_shift + 1);
-		}
-		if (cmd == ONENAND_CMD_ERASE)
-			break;
-
-		page = (int) readw(this->base + ONENAND_REG_START_ADDRESS8);
-		page = (page >> ONENAND_FPA_SHIFT);
-		bufferram = (int) readw(this->base + ONENAND_REG_START_BUFFER);
-		bufferram >>= ONENAND_BSA_SHIFT;
-		bufferram &= ONENAND_BSA_DATARAM1;
-		dataram = (bufferram == ONENAND_BSA_DATARAM1) ? 1 : 0;
-		break;
-	}
-
-	if (block != -1)
-		offset = onenand_addr(this, block);
-
-	if (page != -1)
-		offset += page << this->page_shift;
-
-	onenand_data_handle(this, cmd, dataram, offset);
-
-	onenand_update_interrupt(this, cmd);
-}
-
-/**
- * onenand_writew - [OneNAND Interface] Emulate write operation
- * @value:		value to write
- * @addr:		address to write
- *
- * Write OneNAND register with value
- */
-static void onenand_writew(unsigned short value, void __iomem * addr)
-{
-	struct onenand_chip *this = info->mtd.priv;
-
-	/* BootRAM handling */
-	if (addr < this->base + ONENAND_DATARAM) {
-		onenand_bootram_handle(this, value);
-		return;
-	}
-	/* Command handling */
-	if (addr == this->base + ONENAND_REG_COMMAND)
-		onenand_command_handle(this, value);
-
-	writew(value, addr);
-}
-
-/**
- * flash_init - Initialize OneNAND simulator
- * @flash:		OneNAND simulator data strucutres
- *
- * Initialize OneNAND simulator.
- */
-static int __init flash_init(struct onenand_flash *flash)
-{
-	int density, size;
-	int buffer_size;
-
-	flash->base = kzalloc(131072, GFP_KERNEL);
-	if (!flash->base) {
-		printk(KERN_ERR "Unable to allocate base address.\n");
-		return -ENOMEM;
-	}
-
-	density = device_id >> ONENAND_DEVICE_DENSITY_SHIFT;
-	density &= ONENAND_DEVICE_DENSITY_MASK;
-	size = ((16 << 20) << density);
-
-	ONENAND_CORE(flash) = vmalloc(size + (size >> 5));
-	if (!ONENAND_CORE(flash)) {
-		printk(KERN_ERR "Unable to allocate nand core address.\n");
-		kfree(flash->base);
-		return -ENOMEM;
-	}
-
-	memset(ONENAND_CORE(flash), 0xff, size + (size >> 5));
-
-	/* Setup registers */
-	writew(manuf_id, flash->base + ONENAND_REG_MANUFACTURER_ID);
-	writew(device_id, flash->base + ONENAND_REG_DEVICE_ID);
-	writew(version_id, flash->base + ONENAND_REG_VERSION_ID);
-	writew(technology_id, flash->base + ONENAND_REG_TECHNOLOGY);
-
-	if (density < 2 && (!CONFIG_FLEXONENAND))
-		buffer_size = 0x0400;	/* 1KiB page */
-	else
-		buffer_size = 0x0800;	/* 2KiB page */
-	writew(buffer_size, flash->base + ONENAND_REG_DATA_BUFFER_SIZE);
-
-	return 0;
-}
-
-/**
- * flash_exit - Clean up OneNAND simulator
- * @flash:		OneNAND simulator data structures
- *
- * Clean up OneNAND simulator.
- */
-static void flash_exit(struct onenand_flash *flash)
-{
-	vfree(ONENAND_CORE(flash));
-	kfree(flash->base);
-}
-
-static int __init onenand_sim_init(void)
-{
-	/* Allocate all 0xff chars pointer */
-	ffchars = kmalloc(MAX_ONENAND_PAGESIZE, GFP_KERNEL);
-	if (!ffchars) {
-		printk(KERN_ERR "Unable to allocate ff chars.\n");
-		return -ENOMEM;
-	}
-	memset(ffchars, 0xff, MAX_ONENAND_PAGESIZE);
-
-	/* Allocate OneNAND simulator mtd pointer */
-	info = kzalloc(sizeof(struct onenand_info), GFP_KERNEL);
-	if (!info) {
-		printk(KERN_ERR "Unable to allocate core structures.\n");
-		kfree(ffchars);
-		return -ENOMEM;
-	}
-
-	/* Override write_word function */
-	info->onenand.write_word = onenand_writew;
-
-	if (flash_init(&info->flash)) {
-		printk(KERN_ERR "Unable to allocate flash.\n");
-		kfree(ffchars);
-		kfree(info);
-		return -ENOMEM;
-	}
-
-	info->parts = os_partitions;
-
-	info->onenand.base = info->flash.base;
-	info->onenand.priv = &info->flash;
-
-	info->mtd.name = "OneNAND simulator";
-	info->mtd.priv = &info->onenand;
-	info->mtd.owner = THIS_MODULE;
-
-	if (onenand_scan(&info->mtd, 1)) {
-		flash_exit(&info->flash);
-		kfree(ffchars);
-		kfree(info);
-		return -ENXIO;
-	}
-
-	add_mtd_partitions(&info->mtd, info->parts, ARRAY_SIZE(os_partitions));
-
-	return 0;
-}
-
-static void __exit onenand_sim_exit(void)
-{
-	struct onenand_chip *this = info->mtd.priv;
-	struct onenand_flash *flash = this->priv;
-
-	onenand_release(&info->mtd);
-	flash_exit(flash);
-	kfree(ffchars);
-	kfree(info);
-}
-
-module_init(onenand_sim_init);
-module_exit(onenand_sim_exit);
-
-MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>");
-MODULE_DESCRIPTION("The OneNAND flash simulator");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/onenand/samsung.c b/drivers/mtd/onenand/samsung.c
index 2750317cb58..efb819c3df2 100644
--- a/drivers/mtd/onenand/samsung.c
+++ b/drivers/mtd/onenand/samsung.c
@@ -22,11 +22,12 @@
 #include <linux/mtd/onenand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
 
 #include <asm/mach/flash.h>
-#include <plat/regs-onenand.h>
 
-#include <linux/io.h>
+#include "samsung.h"
 
 enum soc_type {
 	TYPE_S3C6400,
@@ -58,7 +59,7 @@ enum soc_type {
 #define MAP_11				(0x3)
 
 #define S3C64XX_CMD_MAP_SHIFT		24
-#define S5PC1XX_CMD_MAP_SHIFT		26
+#define S5PC100_CMD_MAP_SHIFT		26
 
 #define S3C6400_FBA_SHIFT		10
 #define S3C6400_FPA_SHIFT		4
@@ -81,6 +82,17 @@ enum soc_type {
 #define S5PC110_DMA_TRANS_CMD		0x418
 #define S5PC110_DMA_TRANS_STATUS	0x41C
 #define S5PC110_DMA_TRANS_DIR		0x420
+#define S5PC110_INTC_DMA_CLR		0x1004
+#define S5PC110_INTC_ONENAND_CLR	0x1008
+#define S5PC110_INTC_DMA_MASK		0x1024
+#define S5PC110_INTC_ONENAND_MASK	0x1028
+#define S5PC110_INTC_DMA_PEND		0x1044
+#define S5PC110_INTC_ONENAND_PEND	0x1048
+#define S5PC110_INTC_DMA_STATUS		0x1064
+#define S5PC110_INTC_ONENAND_STATUS	0x1068
+
+#define S5PC110_INTC_DMA_TD		(1 << 24)
+#define S5PC110_INTC_DMA_TE		(1 << 16)
 
 #define S5PC110_DMA_CFG_SINGLE		(0x0 << 16)
 #define S5PC110_DMA_CFG_4BURST		(0x2 << 16)
@@ -134,9 +146,7 @@ struct s3c_onenand {
 	void __iomem	*dma_addr;
 	struct resource *dma_res;
 	unsigned long	phys_base;
-#ifdef CONFIG_MTD_PARTITIONS
-	struct mtd_partition *parts;
-#endif
+	struct completion	complete;
 };
 
 #define CMD_MAP_00(dev, addr)		(dev->cmd_map(MAP_00, ((addr) << 1)))
@@ -146,10 +156,6 @@ struct s3c_onenand {
 
 static struct s3c_onenand *onenand;
 
-#ifdef CONFIG_MTD_PARTITIONS
-static const char *part_probes[] = { "cmdlinepart", NULL, };
-#endif
-
 static inline int s3c_read_reg(int offset)
 {
 	return readl(onenand->base + offset);
@@ -191,7 +197,7 @@ static unsigned int s3c64xx_cmd_map(unsigned type, unsigned val)
 
 static unsigned int s5pc1xx_cmd_map(unsigned type, unsigned val)
 {
-	return (type << S5PC1XX_CMD_MAP_SHIFT) | val;
+	return (type << S5PC100_CMD_MAP_SHIFT) | val;
 }
 
 static unsigned int s3c6400_mem_addr(int fba, int fpa, int fsa)
@@ -531,10 +537,13 @@ static int onenand_write_bufferram(struct mtd_info *mtd, int area,
 	return 0;
 }
 
-static int s5pc110_dma_ops(void *dst, void *src, size_t count, int direction)
+static int (*s5pc110_dma_ops)(dma_addr_t dst, dma_addr_t src, size_t count, int direction);
+
+static int s5pc110_dma_poll(dma_addr_t dst, dma_addr_t src, size_t count, int direction)
 {
 	void __iomem *base = onenand->dma_addr;
 	int status;
+	unsigned long timeout;
 
 	writel(src, base + S5PC110_DMA_SRC_ADDR);
 	writel(dst, base + S5PC110_DMA_DST_ADDR);
@@ -552,17 +561,78 @@ static int s5pc110_dma_ops(void *dst, void *src, size_t count, int direction)
 
 	writel(S5PC110_DMA_TRANS_CMD_TR, base + S5PC110_DMA_TRANS_CMD);
 
+	/*
+	 * There's no exact timeout values at Spec.
+	 * In real case it takes under 1 msec.
+	 * So 20 msecs are enough.
+	 */
+	timeout = jiffies + msecs_to_jiffies(20);
+
 	do {
 		status = readl(base + S5PC110_DMA_TRANS_STATUS);
-	} while (!(status & S5PC110_DMA_TRANS_STATUS_TD));
+		if (status & S5PC110_DMA_TRANS_STATUS_TE) {
+			writel(S5PC110_DMA_TRANS_CMD_TEC,
+					base + S5PC110_DMA_TRANS_CMD);
+			return -EIO;
+		}
+	} while (!(status & S5PC110_DMA_TRANS_STATUS_TD) &&
+		time_before(jiffies, timeout));
 
-	if (status & S5PC110_DMA_TRANS_STATUS_TE) {
-		writel(S5PC110_DMA_TRANS_CMD_TEC, base + S5PC110_DMA_TRANS_CMD);
-		writel(S5PC110_DMA_TRANS_CMD_TDC, base + S5PC110_DMA_TRANS_CMD);
-		return -EIO;
+	writel(S5PC110_DMA_TRANS_CMD_TDC, base + S5PC110_DMA_TRANS_CMD);
+
+	return 0;
+}
+
+static irqreturn_t s5pc110_onenand_irq(int irq, void *data)
+{
+	void __iomem *base = onenand->dma_addr;
+	int status, cmd = 0;
+
+	status = readl(base + S5PC110_INTC_DMA_STATUS);
+
+	if (likely(status & S5PC110_INTC_DMA_TD))
+		cmd = S5PC110_DMA_TRANS_CMD_TDC;
+
+	if (unlikely(status & S5PC110_INTC_DMA_TE))
+		cmd = S5PC110_DMA_TRANS_CMD_TEC;
+
+	writel(cmd, base + S5PC110_DMA_TRANS_CMD);
+	writel(status, base + S5PC110_INTC_DMA_CLR);
+
+	if (!onenand->complete.done)
+		complete(&onenand->complete);
+
+	return IRQ_HANDLED;
+}
+
+static int s5pc110_dma_irq(dma_addr_t dst, dma_addr_t src, size_t count, int direction)
+{
+	void __iomem *base = onenand->dma_addr;
+	int status;
+
+	status = readl(base + S5PC110_INTC_DMA_MASK);
+	if (status) {
+		status &= ~(S5PC110_INTC_DMA_TD | S5PC110_INTC_DMA_TE);
+		writel(status, base + S5PC110_INTC_DMA_MASK);
 	}
 
-	writel(S5PC110_DMA_TRANS_CMD_TDC, base + S5PC110_DMA_TRANS_CMD);
+	writel(src, base + S5PC110_DMA_SRC_ADDR);
+	writel(dst, base + S5PC110_DMA_DST_ADDR);
+
+	if (direction == S5PC110_DMA_DIR_READ) {
+		writel(S5PC110_DMA_SRC_CFG_READ, base + S5PC110_DMA_SRC_CFG);
+		writel(S5PC110_DMA_DST_CFG_READ, base + S5PC110_DMA_DST_CFG);
+	} else {
+		writel(S5PC110_DMA_SRC_CFG_WRITE, base + S5PC110_DMA_SRC_CFG);
+		writel(S5PC110_DMA_DST_CFG_WRITE, base + S5PC110_DMA_DST_CFG);
+	}
+
+	writel(count, base + S5PC110_DMA_TRANS_SIZE);
+	writel(direction, base + S5PC110_DMA_TRANS_DIR);
+
+	writel(S5PC110_DMA_TRANS_CMD_TR, base + S5PC110_DMA_TRANS_CMD);
+
+	wait_for_completion_timeout(&onenand->complete, msecs_to_jiffies(20));
 
 	return 0;
 }
@@ -571,13 +641,13 @@ static int s5pc110_read_bufferram(struct mtd_info *mtd, int area,
 		unsigned char *buffer, int offset, size_t count)
 {
 	struct onenand_chip *this = mtd->priv;
-	void __iomem *bufferram;
 	void __iomem *p;
 	void *buf = (void *) buffer;
 	dma_addr_t dma_src, dma_dst;
-	int err;
+	int err, ofs, page_dma = 0;
+	struct device *dev = &onenand->pdev->dev;
 
-	p = bufferram = this->base + area;
+	p = this->base + area;
 	if (ONENAND_CURRENT_BUFFERRAM(this)) {
 		if (area == ONENAND_DATARAM)
 			p += this->writesize;
@@ -599,21 +669,30 @@ static int s5pc110_read_bufferram(struct mtd_info *mtd, int area,
 		page = vmalloc_to_page(buf);
 		if (!page)
 			goto normal;
-		buf = page_address(page) + ((size_t) buf & ~PAGE_MASK);
-	}
 
-	/* DMA routine */
-	dma_src = onenand->phys_base + (p - this->base);
-	dma_dst = dma_map_single(&onenand->pdev->dev,
-			buf, count, DMA_FROM_DEVICE);
-	if (dma_mapping_error(&onenand->pdev->dev, dma_dst)) {
-		dev_err(&onenand->pdev->dev,
-			"Couldn't map a %d byte buffer for DMA\n", count);
+		/* Page offset */
+		ofs = ((size_t) buf & ~PAGE_MASK);
+		page_dma = 1;
+
+		/* DMA routine */
+		dma_src = onenand->phys_base + (p - this->base);
+		dma_dst = dma_map_page(dev, page, ofs, count, DMA_FROM_DEVICE);
+	} else {
+		/* DMA routine */
+		dma_src = onenand->phys_base + (p - this->base);
+		dma_dst = dma_map_single(dev, buf, count, DMA_FROM_DEVICE);
+	}
+	if (dma_mapping_error(dev, dma_dst)) {
+		dev_err(dev, "Couldn't map a %d byte buffer for DMA\n", count);
 		goto normal;
 	}
-	err = s5pc110_dma_ops((void *) dma_dst, (void *) dma_src,
+	err = s5pc110_dma_ops(dma_dst, dma_src,
 			count, S5PC110_DMA_DIR_READ);
-	dma_unmap_single(&onenand->pdev->dev, dma_dst, count, DMA_FROM_DEVICE);
+
+	if (page_dma)
+		dma_unmap_page(dev, dma_dst, count, DMA_FROM_DEVICE);
+	else
+		dma_unmap_single(dev, dma_dst, count, DMA_FROM_DEVICE);
 
 	if (!err)
 		return 0;
@@ -621,7 +700,7 @@ static int s5pc110_read_bufferram(struct mtd_info *mtd, int area,
 normal:
 	if (count != mtd->writesize) {
 		/* Copy the bufferram to memory to prevent unaligned access */
-		memcpy(this->page_buf, bufferram, mtd->writesize);
+		memcpy(this->page_buf, p, mtd->writesize);
 		p = this->page_buf + offset;
 	}
 
@@ -630,6 +709,12 @@ normal:
 	return 0;
 }
 
+static int s5pc110_chip_probe(struct mtd_info *mtd)
+{
+	/* Now just return 0 */
+	return 0;
+}
+
 static int s3c_onenand_bbt_wait(struct mtd_info *mtd, int state)
 {
 	unsigned int flags = INT_ACT | LOAD_CMP;
@@ -755,8 +840,8 @@ static void s3c_onenand_setup(struct mtd_info *mtd)
 		onenand->cmd_map = s5pc1xx_cmd_map;
 	} else if (onenand->type == TYPE_S5PC110) {
 		/* Use generic onenand functions */
-		onenand->cmd_map = s5pc1xx_cmd_map;
 		this->read_bufferram = s5pc110_read_bufferram;
+		this->chip_probe = s5pc110_chip_probe;
 		return;
 	} else {
 		BUG();
@@ -781,17 +866,14 @@ static int s3c_onenand_probe(struct platform_device *pdev)
 	struct mtd_info *mtd;
 	struct resource *r;
 	int size, err;
-	unsigned long onenand_ctrl_cfg = 0;
 
-	pdata = pdev->dev.platform_data;
+	pdata = dev_get_platdata(&pdev->dev);
 	/* No need to check pdata. the platform data is optional */
 
 	size = sizeof(struct mtd_info) + sizeof(struct onenand_chip);
 	mtd = kzalloc(size, GFP_KERNEL);
-	if (!mtd) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
+	if (!mtd)
 		return -ENOMEM;
-	}
 
 	onenand = kzalloc(sizeof(struct s3c_onenand), GFP_KERNEL);
 	if (!onenand) {
@@ -839,7 +921,7 @@ static int s3c_onenand_probe(struct platform_device *pdev)
 		r = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 		if (!r) {
 			dev_err(&pdev->dev, "no buffer memory resource defined\n");
-			return -ENOENT;
+			err = -ENOENT;
 			goto ahb_resource_failed;
 		}
 
@@ -880,7 +962,7 @@ static int s3c_onenand_probe(struct platform_device *pdev)
 		r = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 		if (!r) {
 			dev_err(&pdev->dev, "no dma memory resource defined\n");
-			return -ENOENT;
+			err = -ENOENT;
 			goto dma_resource_failed;
 		}
 
@@ -901,13 +983,19 @@ static int s3c_onenand_probe(struct platform_device *pdev)
 
 		onenand->phys_base = onenand->base_res->start;
 
-		onenand_ctrl_cfg = readl(onenand->dma_addr + 0x100);
-		if ((onenand_ctrl_cfg & ONENAND_SYS_CFG1_SYNC_WRITE) &&
-		    onenand->dma_addr)
-			writel(onenand_ctrl_cfg & ~ONENAND_SYS_CFG1_SYNC_WRITE,
-					onenand->dma_addr + 0x100);
-		else
-			onenand_ctrl_cfg = 0;
+		s5pc110_dma_ops = s5pc110_dma_poll;
+		/* Interrupt support */
+		r = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+		if (r) {
+			init_completion(&onenand->complete);
+			s5pc110_dma_ops = s5pc110_dma_irq;
+			err = request_irq(r->start, s5pc110_onenand_irq,
+					IRQF_SHARED, "onenand", &onenand);
+			if (err) {
+				dev_err(&pdev->dev, "failed to get irq\n");
+				goto scan_failed;
+			}
+		}
 	}
 
 	if (onenand_scan(mtd, 1)) {
@@ -915,10 +1003,7 @@ static int s3c_onenand_probe(struct platform_device *pdev)
 		goto scan_failed;
 	}
 
-	if (onenand->type == TYPE_S5PC110) {
-		if (onenand_ctrl_cfg && onenand->dma_addr)
-			writel(onenand_ctrl_cfg, onenand->dma_addr + 0x100);
-	} else {
+	if (onenand->type != TYPE_S5PC110) {
 		/* S3C doesn't handle subpage write */
 		mtd->subpage_sft = 0;
 		this->subpagesize = mtd->writesize;
@@ -927,15 +1012,9 @@ static int s3c_onenand_probe(struct platform_device *pdev)
 	if (s3c_read_reg(MEM_CFG_OFFSET) & ONENAND_SYS_CFG1_SYNC_READ)
 		dev_info(&onenand->pdev->dev, "OneNAND Sync. Burst Read enabled\n");
 
-#ifdef CONFIG_MTD_PARTITIONS
-	err = parse_mtd_partitions(mtd, part_probes, &onenand->parts, 0);
-	if (err > 0)
-		add_mtd_partitions(mtd, onenand->parts, err);
-	else if (err <= 0 && pdata && pdata->parts)
-		add_mtd_partitions(mtd, pdata->parts, pdata->nr_parts);
-	else
-#endif
-		err = add_mtd_device(mtd);
+	err = mtd_device_parse_register(mtd, NULL, NULL,
+					pdata ? pdata->parts : NULL,
+					pdata ? pdata->nr_parts : 0);
 
 	platform_set_drvdata(pdev, mtd);
 
@@ -972,7 +1051,7 @@ onenand_fail:
 	return err;
 }
 
-static int __devexit s3c_onenand_remove(struct platform_device *pdev)
+static int s3c_onenand_remove(struct platform_device *pdev)
 {
 	struct mtd_info *mtd = platform_get_drvdata(pdev);
 
@@ -992,7 +1071,6 @@ static int __devexit s3c_onenand_remove(struct platform_device *pdev)
 	release_mem_region(onenand->base_res->start,
 			   resource_size(onenand->base_res));
 
-	platform_set_drvdata(pdev, NULL);
 	kfree(onenand->oob_buf);
 	kfree(onenand->page_buf);
 	kfree(onenand);
@@ -1007,7 +1085,7 @@ static int s3c_pm_ops_suspend(struct device *dev)
 	struct onenand_chip *this = mtd->priv;
 
 	this->wait(mtd, FL_PM_SUSPENDED);
-	return mtd->suspend(mtd);
+	return 0;
 }
 
 static  int s3c_pm_ops_resume(struct device *dev)
@@ -1016,7 +1094,6 @@ static  int s3c_pm_ops_resume(struct device *dev)
 	struct mtd_info *mtd = platform_get_drvdata(pdev);
 	struct onenand_chip *this = mtd->priv;
 
-	mtd->resume(mtd);
 	this->unlock_all(mtd);
 	return 0;
 }
@@ -1050,21 +1127,10 @@ static struct platform_driver s3c_onenand_driver = {
 	},
 	.id_table	= s3c_onenand_driver_ids,
 	.probe          = s3c_onenand_probe,
-	.remove         = __devexit_p(s3c_onenand_remove),
+	.remove         = s3c_onenand_remove,
 };
 
-static int __init s3c_onenand_init(void)
-{
-	return platform_driver_register(&s3c_onenand_driver);
-}
-
-static void __exit s3c_onenand_exit(void)
-{
-	platform_driver_unregister(&s3c_onenand_driver);
-}
-
-module_init(s3c_onenand_init);
-module_exit(s3c_onenand_exit);
+module_platform_driver(s3c_onenand_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>");
diff --git a/drivers/mtd/onenand/samsung.h b/drivers/mtd/onenand/samsung.h
new file mode 100644
index 00000000000..9016dc0136a
--- /dev/null
+++ b/drivers/mtd/onenand/samsung.h
@@ -0,0 +1,59 @@
+/*
+ *  Copyright (C) 2008-2010 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __SAMSUNG_ONENAND_H__
+#define __SAMSUNG_ONENAND_H__
+
+/*
+ * OneNAND Controller
+ */
+#define MEM_CFG_OFFSET		0x0000
+#define BURST_LEN_OFFSET	0x0010
+#define MEM_RESET_OFFSET	0x0020
+#define INT_ERR_STAT_OFFSET	0x0030
+#define INT_ERR_MASK_OFFSET	0x0040
+#define INT_ERR_ACK_OFFSET	0x0050
+#define ECC_ERR_STAT_OFFSET	0x0060
+#define MANUFACT_ID_OFFSET	0x0070
+#define DEVICE_ID_OFFSET	0x0080
+#define DATA_BUF_SIZE_OFFSET	0x0090
+#define BOOT_BUF_SIZE_OFFSET	0x00A0
+#define BUF_AMOUNT_OFFSET	0x00B0
+#define TECH_OFFSET		0x00C0
+#define FBA_WIDTH_OFFSET	0x00D0
+#define FPA_WIDTH_OFFSET	0x00E0
+#define FSA_WIDTH_OFFSET	0x00F0
+#define TRANS_SPARE_OFFSET	0x0140
+#define DBS_DFS_WIDTH_OFFSET	0x0160
+#define INT_PIN_ENABLE_OFFSET	0x01A0
+#define ACC_CLOCK_OFFSET	0x01C0
+#define FLASH_VER_ID_OFFSET	0x01F0
+#define FLASH_AUX_CNTRL_OFFSET	0x0300		/* s3c64xx only */
+
+#define ONENAND_MEM_RESET_HOT	0x3
+#define ONENAND_MEM_RESET_COLD	0x2
+#define ONENAND_MEM_RESET_WARM	0x1
+
+#define CACHE_OP_ERR		(1 << 13)
+#define RST_CMP			(1 << 12)
+#define RDY_ACT			(1 << 11)
+#define INT_ACT			(1 << 10)
+#define UNSUP_CMD		(1 << 9)
+#define LOCKED_BLK		(1 << 8)
+#define BLK_RW_CMP		(1 << 7)
+#define ERS_CMP			(1 << 6)
+#define PGM_CMP			(1 << 5)
+#define LOAD_CMP		(1 << 4)
+#define ERS_FAIL		(1 << 3)
+#define PGM_FAIL		(1 << 2)
+#define INT_TO			(1 << 1)
+#define LD_FAIL_ECC_ERR		(1 << 0)
+
+#define TSRF			(1 << 0)
+
+#endif
diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c
index 2d600a1bf2a..5da911ebdf4 100644
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -1,6 +1,24 @@
 /*
  * Parse RedBoot-style Flash Image System (FIS) tables and
  * produce a Linux partition array to match.
+ *
+ * Copyright © 2001      Red Hat UK Limited
+ * Copyright © 2001-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
  */
 
 #include <linux/kernel.h>
@@ -10,6 +28,7 @@
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/module.h>
 
 struct fis_image_desc {
     unsigned char name[16];      // Null terminated name
@@ -38,8 +57,8 @@ static inline int redboot_checksum(struct fis_image_desc *img)
 }
 
 static int parse_redboot_partitions(struct mtd_info *master,
-                             struct mtd_partition **pparts,
-                             unsigned long fis_origin)
+				    struct mtd_partition **pparts,
+				    struct mtd_part_parser_data *data)
 {
 	int nrparts = 0;
 	struct fis_image_desc *buf;
@@ -59,8 +78,7 @@ static int parse_redboot_partitions(struct mtd_info *master,
 
 	if ( directory < 0 ) {
 		offset = master->size + directory * master->erasesize;
-		while (master->block_isbad && 
-		       master->block_isbad(master, offset)) {
+		while (mtd_block_isbad(master, offset)) {
 			if (!offset) {
 			nogood:
 				printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
@@ -70,8 +88,7 @@ static int parse_redboot_partitions(struct mtd_info *master,
 		}
 	} else {
 		offset = directory * master->erasesize;
-		while (master->block_isbad && 
-		       master->block_isbad(master, offset)) {
+		while (mtd_block_isbad(master, offset)) {
 			offset += master->erasesize;
 			if (offset == master->size)
 				goto nogood;
@@ -85,8 +102,8 @@ static int parse_redboot_partitions(struct mtd_info *master,
 	printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
 	       master->name, offset);
 
-	ret = master->read(master, offset,
-			   master->erasesize, &retlen, (void *)buf);
+	ret = mtd_read(master, offset, master->erasesize, &retlen,
+		       (void *)buf);
 
 	if (ret)
 		goto out;
@@ -179,11 +196,10 @@ static int parse_redboot_partitions(struct mtd_info *master,
 			goto out;
 		}
 		new_fl->img = &buf[i];
-                if (fis_origin) {
-                        buf[i].flash_base -= fis_origin;
-                } else {
-                        buf[i].flash_base &= master->size-1;
-                }
+		if (data && data->origin)
+			buf[i].flash_base -= data->origin;
+		else
+			buf[i].flash_base &= master->size-1;
 
 		/* I'm sure the JFFS2 code has done me permanent damage.
 		 * I now think the following is _normal_
@@ -279,9 +295,13 @@ static struct mtd_part_parser redboot_parser = {
 	.name = "RedBoot",
 };
 
+/* mtd parsers will request the module by parser name */
+MODULE_ALIAS("RedBoot");
+
 static int __init redboot_parser_init(void)
 {
-	return register_mtd_parser(&redboot_parser);
+	register_mtd_parser(&redboot_parser);
+	return 0;
 }
 
 static void __exit redboot_parser_exit(void)
diff --git a/drivers/mtd/rfd_ftl.c b/drivers/mtd/rfd_ftl.c
index 63b83c0d9a1..d1cbf26db2c 100644
--- a/drivers/mtd/rfd_ftl.c
+++ b/drivers/mtd/rfd_ftl.c
@@ -1,7 +1,7 @@
 /*
  * rfd_ftl.c -- resident flash disk (flash translation layer)
  *
- * Copyright (C) 2005  Sean Young <sean@mess.org>
+ * Copyright © 2005  Sean Young <sean@mess.org>
  *
  * This type of flash translation layer (FTL) is used by the Embedded BIOS
  * by General Software. It is known as the Resident Flash Disk (RFD), see:
@@ -18,6 +18,7 @@
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
 #include <linux/jiffies.h>
+#include <linux/module.h>
 
 #include <asm/types.h>
 
@@ -199,9 +200,9 @@ static int scan_header(struct partition *part)
 		part->sector_map[i] = -1;
 
 	for (i=0, blocks_found=0; i<part->total_blocks; i++) {
-		rc = part->mbd.mtd->read(part->mbd.mtd,
-				i * part->block_size, part->header_size,
-				&retlen, (u_char*)part->header_cache);
+		rc = mtd_read(part->mbd.mtd, i * part->block_size,
+			      part->header_size, &retlen,
+			      (u_char *)part->header_cache);
 
 		if (!rc && retlen != part->header_size)
 			rc = -EIO;
@@ -249,8 +250,8 @@ static int rfd_ftl_readsect(struct mtd_blktrans_dev *dev, u_long sector, char *b
 
 	addr = part->sector_map[sector];
 	if (addr != -1) {
-		rc = part->mbd.mtd->read(part->mbd.mtd, addr, SECTOR_SIZE,
-						&retlen, (u_char*)buf);
+		rc = mtd_read(part->mbd.mtd, addr, SECTOR_SIZE, &retlen,
+			      (u_char *)buf);
 		if (!rc && retlen != SECTOR_SIZE)
 			rc = -EIO;
 
@@ -303,9 +304,8 @@ static void erase_callback(struct erase_info *erase)
 	part->blocks[i].used_sectors = 0;
 	part->blocks[i].erases++;
 
-	rc = part->mbd.mtd->write(part->mbd.mtd,
-		part->blocks[i].offset, sizeof(magic), &retlen,
-		(u_char*)&magic);
+	rc = mtd_write(part->mbd.mtd, part->blocks[i].offset, sizeof(magic),
+		       &retlen, (u_char *)&magic);
 
 	if (!rc && retlen != sizeof(magic))
 		rc = -EIO;
@@ -341,7 +341,7 @@ static int erase_block(struct partition *part, int block)
 	part->blocks[block].state = BLOCK_ERASING;
 	part->blocks[block].free_sectors = 0;
 
-	rc = part->mbd.mtd->erase(part->mbd.mtd, erase);
+	rc = mtd_erase(part->mbd.mtd, erase);
 
 	if (rc) {
 		printk(KERN_ERR PREFIX "erase of region %llx,%llx on '%s' "
@@ -371,9 +371,8 @@ static int move_block_contents(struct partition *part, int block_no, u_long *old
 	if (!map)
 		goto err2;
 
-	rc = part->mbd.mtd->read(part->mbd.mtd,
-		part->blocks[block_no].offset, part->header_size,
-		&retlen, (u_char*)map);
+	rc = mtd_read(part->mbd.mtd, part->blocks[block_no].offset,
+		      part->header_size, &retlen, (u_char *)map);
 
 	if (!rc && retlen != part->header_size)
 		rc = -EIO;
@@ -412,8 +411,8 @@ static int move_block_contents(struct partition *part, int block_no, u_long *old
 			}
 			continue;
 		}
-		rc = part->mbd.mtd->read(part->mbd.mtd, addr,
-			SECTOR_SIZE, &retlen, sector_data);
+		rc = mtd_read(part->mbd.mtd, addr, SECTOR_SIZE, &retlen,
+			      sector_data);
 
 		if (!rc && retlen != SECTOR_SIZE)
 			rc = -EIO;
@@ -449,8 +448,7 @@ static int reclaim_block(struct partition *part, u_long *old_sector)
 	int rc;
 
 	/* we have a race if sync doesn't exist */
-	if (part->mbd.mtd->sync)
-		part->mbd.mtd->sync(part->mbd.mtd);
+	mtd_sync(part->mbd.mtd);
 
 	score = 0x7fffffff; /* MAX_INT */
 	best_block = -1;
@@ -562,8 +560,9 @@ static int find_writable_block(struct partition *part, u_long *old_sector)
 		}
 	}
 
-	rc = part->mbd.mtd->read(part->mbd.mtd, part->blocks[block].offset,
-		part->header_size, &retlen, (u_char*)part->header_cache);
+	rc = mtd_read(part->mbd.mtd, part->blocks[block].offset,
+		      part->header_size, &retlen,
+		      (u_char *)part->header_cache);
 
 	if (!rc && retlen != part->header_size)
 		rc = -EIO;
@@ -594,8 +593,8 @@ static int mark_sector_deleted(struct partition *part, u_long old_addr)
 
 	addr = part->blocks[block].offset +
 			(HEADER_MAP_OFFSET + offset) * sizeof(u16);
-	rc = part->mbd.mtd->write(part->mbd.mtd, addr,
-		sizeof(del), &retlen, (u_char*)&del);
+	rc = mtd_write(part->mbd.mtd, addr, sizeof(del), &retlen,
+		       (u_char *)&del);
 
 	if (!rc && retlen != sizeof(del))
 		rc = -EIO;
@@ -603,8 +602,7 @@ static int mark_sector_deleted(struct partition *part, u_long old_addr)
 	if (rc) {
 		printk(KERN_ERR PREFIX "error writing '%s' at "
 			"0x%lx\n", part->mbd.mtd->name, addr);
-		if (rc)
-			goto err;
+		goto err;
 	}
 	if (block == part->current_block)
 		part->header_cache[offset + HEADER_MAP_OFFSET] = del;
@@ -667,8 +665,8 @@ static int do_writesect(struct mtd_blktrans_dev *dev, u_long sector, char *buf,
 
 	addr = (i + part->header_sectors_per_block) * SECTOR_SIZE +
 		block->offset;
-	rc = part->mbd.mtd->write(part->mbd.mtd,
-		addr, SECTOR_SIZE, &retlen, (u_char*)buf);
+	rc = mtd_write(part->mbd.mtd, addr, SECTOR_SIZE, &retlen,
+		       (u_char *)buf);
 
 	if (!rc && retlen != SECTOR_SIZE)
 		rc = -EIO;
@@ -676,8 +674,7 @@ static int do_writesect(struct mtd_blktrans_dev *dev, u_long sector, char *buf,
 	if (rc) {
 		printk(KERN_ERR PREFIX "error writing '%s' at 0x%lx\n",
 				part->mbd.mtd->name, addr);
-		if (rc)
-			goto err;
+		goto err;
 	}
 
 	part->sector_map[sector] = addr;
@@ -687,8 +684,8 @@ static int do_writesect(struct mtd_blktrans_dev *dev, u_long sector, char *buf,
 	part->header_cache[i + HEADER_MAP_OFFSET] = entry;
 
 	addr = block->offset + (HEADER_MAP_OFFSET + i) * sizeof(u16);
-	rc = part->mbd.mtd->write(part->mbd.mtd, addr,
-			sizeof(entry), &retlen, (u_char*)&entry);
+	rc = mtd_write(part->mbd.mtd, addr, sizeof(entry), &retlen,
+		       (u_char *)&entry);
 
 	if (!rc && retlen != sizeof(entry))
 		rc = -EIO;
@@ -696,8 +693,7 @@ static int do_writesect(struct mtd_blktrans_dev *dev, u_long sector, char *buf,
 	if (rc) {
 		printk(KERN_ERR PREFIX "error writing '%s' at 0x%lx\n",
 				part->mbd.mtd->name, addr);
-		if (rc)
-			goto err;
+		goto err;
 	}
 	block->used_sectors++;
 	block->free_sectors--;
diff --git a/drivers/mtd/sm_ftl.c b/drivers/mtd/sm_ftl.c
index 67822cf6c02..cf49c22673b 100644
--- a/drivers/mtd/sm_ftl.c
+++ b/drivers/mtd/sm_ftl.c
@@ -22,10 +22,10 @@
 
 
 
-struct workqueue_struct *cache_flush_workqueue;
+static struct workqueue_struct *cache_flush_workqueue;
 
 static int cache_timeout = 1000;
-module_param(cache_timeout, bool, S_IRUGO);
+module_param(cache_timeout, int, S_IRUGO);
 MODULE_PARM_DESC(cache_timeout,
 	"Timeout (in ms) for cache flush (1000 ms default");
 
@@ -34,14 +34,14 @@ module_param(debug, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug level (0-2)");
 
 
-/* ------------------- sysfs attributtes ---------------------------------- */
+/* ------------------- sysfs attributes ---------------------------------- */
 struct sm_sysfs_attribute {
 	struct device_attribute dev_attr;
 	char *data;
 	int len;
 };
 
-ssize_t sm_attr_show(struct device *dev, struct device_attribute *attr,
+static ssize_t sm_attr_show(struct device *dev, struct device_attribute *attr,
 		     char *buf)
 {
 	struct sm_sysfs_attribute *sm_attr =
@@ -54,27 +54,28 @@ ssize_t sm_attr_show(struct device *dev, struct device_attribute *attr,
 
 #define NUM_ATTRIBUTES 1
 #define SM_CIS_VENDOR_OFFSET 0x59
-struct attribute_group *sm_create_sysfs_attributes(struct sm_ftl *ftl)
+static struct attribute_group *sm_create_sysfs_attributes(struct sm_ftl *ftl)
 {
 	struct attribute_group *attr_group;
 	struct attribute **attributes;
 	struct sm_sysfs_attribute *vendor_attribute;
+	char *vendor;
 
-	int vendor_len = strnlen(ftl->cis_buffer + SM_CIS_VENDOR_OFFSET,
-					SM_SMALL_PAGE - SM_CIS_VENDOR_OFFSET);
-
-	char *vendor = kmalloc(vendor_len, GFP_KERNEL);
-	memcpy(vendor, ftl->cis_buffer + SM_CIS_VENDOR_OFFSET, vendor_len);
-	vendor[vendor_len] = 0;
+	vendor = kstrndup(ftl->cis_buffer + SM_CIS_VENDOR_OFFSET,
+			  SM_SMALL_PAGE - SM_CIS_VENDOR_OFFSET, GFP_KERNEL);
+	if (!vendor)
+		goto error1;
 
 	/* Initialize sysfs attributes */
 	vendor_attribute =
 		kzalloc(sizeof(struct sm_sysfs_attribute), GFP_KERNEL);
+	if (!vendor_attribute)
+		goto error2;
 
 	sysfs_attr_init(&vendor_attribute->dev_attr.attr);
 
 	vendor_attribute->data = vendor;
-	vendor_attribute->len = vendor_len;
+	vendor_attribute->len = strlen(vendor);
 	vendor_attribute->dev_attr.attr.name = "vendor";
 	vendor_attribute->dev_attr.attr.mode = S_IRUGO;
 	vendor_attribute->dev_attr.show = sm_attr_show;
@@ -83,15 +84,27 @@ struct attribute_group *sm_create_sysfs_attributes(struct sm_ftl *ftl)
 	/* Create array of pointers to the attributes */
 	attributes = kzalloc(sizeof(struct attribute *) * (NUM_ATTRIBUTES + 1),
 								GFP_KERNEL);
+	if (!attributes)
+		goto error3;
 	attributes[0] = &vendor_attribute->dev_attr.attr;
 
 	/* Finally create the attribute group */
 	attr_group = kzalloc(sizeof(struct attribute_group), GFP_KERNEL);
+	if (!attr_group)
+		goto error4;
 	attr_group->attrs = attributes;
 	return attr_group;
+error4:
+	kfree(attributes);
+error3:
+	kfree(vendor_attribute);
+error2:
+	kfree(vendor);
+error1:
+	return NULL;
 }
 
-void sm_delete_sysfs_attributes(struct sm_ftl *ftl)
+static void sm_delete_sysfs_attributes(struct sm_ftl *ftl)
 {
 	struct attribute **attributes = ftl->disk_attributes->attrs;
 	int i;
@@ -122,7 +135,7 @@ static int sm_get_lba(uint8_t *lba)
 	if ((lba[0] & 0xF8) != 0x10)
 		return -2;
 
-	/* check parity - endianess doesn't matter */
+	/* check parity - endianness doesn't matter */
 	if (hweight16(*(uint16_t *)lba) & 1)
 		return -2;
 
@@ -131,7 +144,7 @@ static int sm_get_lba(uint8_t *lba)
 
 
 /*
- * Read LBA asscociated with block
+ * Read LBA associated with block
  * returns -1, if block is erased
  * returns -2 if error happens
  */
@@ -236,11 +249,11 @@ static int sm_read_sector(struct sm_ftl *ftl,
 		return 0;
 	}
 
-	/* User might not need the oob, but we do for data vertification */
+	/* User might not need the oob, but we do for data verification */
 	if (!oob)
 		oob = &tmp_oob;
 
-	ops.mode = ftl->smallpagenand ? MTD_OOB_RAW : MTD_OOB_PLACE;
+	ops.mode = ftl->smallpagenand ? MTD_OPS_RAW : MTD_OPS_PLACE_OOB;
 	ops.ooboffs = 0;
 	ops.ooblen = SM_OOB_SIZE;
 	ops.oobbuf = (void *)oob;
@@ -260,12 +273,12 @@ again:
 			return ret;
 	}
 
-	/* Unfortunelly, oob read will _always_ succeed,
+	/* Unfortunately, oob read will _always_ succeed,
 		despite card removal..... */
-	ret = mtd->read_oob(mtd, sm_mkoffset(ftl, zone, block, boffset), &ops);
+	ret = mtd_read_oob(mtd, sm_mkoffset(ftl, zone, block, boffset), &ops);
 
 	/* Test for unknown errors */
-	if (ret != 0 && ret != -EUCLEAN && ret != -EBADMSG) {
+	if (ret != 0 && !mtd_is_bitflip_or_eccerr(ret)) {
 		dbg("read of block %d at zone %d, failed due to error (%d)",
 			block, zone, ret);
 		goto again;
@@ -290,7 +303,7 @@ again:
 	}
 
 	/* Test ECC*/
-	if (ret == -EBADMSG ||
+	if (mtd_is_eccerr(ret) ||
 		(ftl->smallpagenand && sm_correct_sector(buffer, oob))) {
 
 		dbg("read of block %d at zone %d, failed due to ECC error",
@@ -320,17 +333,16 @@ static int sm_write_sector(struct sm_ftl *ftl,
 	if (ftl->unstable)
 		return -EIO;
 
-	ops.mode = ftl->smallpagenand ? MTD_OOB_RAW : MTD_OOB_PLACE;
+	ops.mode = ftl->smallpagenand ? MTD_OPS_RAW : MTD_OPS_PLACE_OOB;
 	ops.len = SM_SECTOR_SIZE;
 	ops.datbuf = buffer;
 	ops.ooboffs = 0;
 	ops.ooblen = SM_OOB_SIZE;
 	ops.oobbuf = (void *)oob;
 
-	ret = mtd->write_oob(mtd, sm_mkoffset(ftl, zone, block, boffset), &ops);
+	ret = mtd_write_oob(mtd, sm_mkoffset(ftl, zone, block, boffset), &ops);
 
 	/* Now we assume that hardware will catch write bitflip errors */
-	/* If you are paranoid, use CONFIG_MTD_NAND_VERIFY_WRITE */
 
 	if (ret) {
 		dbg("write to block %d at zone %d, failed with error %d",
@@ -431,14 +443,14 @@ static void sm_mark_block_bad(struct sm_ftl *ftl, int zone, int block)
 
 	/* We aren't checking the return value, because we don't care */
 	/* This also fails on fake xD cards, but I guess these won't expose
-		any bad blocks till fail completly */
+		any bad blocks till fail completely */
 	for (boffset = 0; boffset < ftl->block_size; boffset += SM_SECTOR_SIZE)
 		sm_write_sector(ftl, zone, block, boffset, NULL, &oob);
 }
 
 /*
  * Erase a block within a zone
- * If erase succedes, it updates free block fifo, otherwise marks block as bad
+ * If erase succeeds, it updates free block fifo, otherwise marks block as bad
  */
 static int sm_erase_block(struct sm_ftl *ftl, int zone_num, uint16_t block,
 			  int put_free)
@@ -463,7 +475,7 @@ static int sm_erase_block(struct sm_ftl *ftl, int zone_num, uint16_t block,
 		return -EIO;
 	}
 
-	if (mtd->erase(mtd, &erase)) {
+	if (mtd_erase(mtd, &erase)) {
 		sm_printk("erase of block %d in zone %d failed",
 							block, zone_num);
 		goto error;
@@ -494,7 +506,7 @@ static void sm_erase_callback(struct erase_info *self)
 	complete(&ftl->erase_completion);
 }
 
-/* Throughtly test that block is valid. */
+/* Thoroughly test that block is valid. */
 static int sm_check_block(struct sm_ftl *ftl, int zone, int block)
 {
 	int boffset;
@@ -510,7 +522,7 @@ static int sm_check_block(struct sm_ftl *ftl, int zone, int block)
 	for (boffset = 0; boffset < ftl->block_size;
 					boffset += SM_SECTOR_SIZE) {
 
-		/* This shoudn't happen anyway */
+		/* This shouldn't happen anyway */
 		if (sm_read_sector(ftl, zone, block, boffset, NULL, &oob))
 			return -2;
 
@@ -524,7 +536,7 @@ static int sm_check_block(struct sm_ftl *ftl, int zone, int block)
 			return -EIO;
 	}
 
-	/* If the block is sliced (partialy erased usually) erase it */
+	/* If the block is sliced (partially erased usually) erase it */
 	if (i == 2) {
 		sm_erase_block(ftl, zone, block, 1);
 		return 1;
@@ -556,7 +568,7 @@ static const uint8_t cis_signature[] = {
 };
 /* Find out media parameters.
  * This ideally has to be based on nand id, but for now device size is enough */
-int sm_get_media_info(struct sm_ftl *ftl, struct mtd_info *mtd)
+static int sm_get_media_info(struct sm_ftl *ftl, struct mtd_info *mtd)
 {
 	int i;
 	int size_in_megs = mtd->size / (1024 * 1024);
@@ -629,8 +641,8 @@ int sm_get_media_info(struct sm_ftl *ftl, struct mtd_info *mtd)
 	if (!ftl->smallpagenand && mtd->oobsize < SM_OOB_SIZE)
 		return -ENODEV;
 
-	/* We use these functions for IO */
-	if (!mtd->read_oob || !mtd->write_oob)
+	/* We use OOB */
+	if (!mtd_has_oob(mtd))
 		return -ENODEV;
 
 	/* Find geometry information */
@@ -862,8 +874,8 @@ static int sm_init_zone(struct sm_ftl *ftl, int zone_num)
 	return 0;
 }
 
-/* Get and automaticly initialize an FTL mapping for one zone */
-struct ftl_zone *sm_get_zone(struct sm_ftl *ftl, int zone_num)
+/* Get and automatically initialize an FTL mapping for one zone */
+static struct ftl_zone *sm_get_zone(struct sm_ftl *ftl, int zone_num)
 {
 	struct ftl_zone *zone;
 	int error;
@@ -884,7 +896,7 @@ struct ftl_zone *sm_get_zone(struct sm_ftl *ftl, int zone_num)
 /* ----------------- cache handling ------------------------------------------*/
 
 /* Initialize the one block cache */
-void sm_cache_init(struct sm_ftl *ftl)
+static void sm_cache_init(struct sm_ftl *ftl)
 {
 	ftl->cache_data_invalid_bitmap = 0xFFFFFFFF;
 	ftl->cache_clean = 1;
@@ -894,7 +906,7 @@ void sm_cache_init(struct sm_ftl *ftl)
 }
 
 /* Put sector in one block cache */
-void sm_cache_put(struct sm_ftl *ftl, char *buffer, int boffset)
+static void sm_cache_put(struct sm_ftl *ftl, char *buffer, int boffset)
 {
 	memcpy(ftl->cache_data + boffset, buffer, SM_SECTOR_SIZE);
 	clear_bit(boffset / SM_SECTOR_SIZE, &ftl->cache_data_invalid_bitmap);
@@ -902,7 +914,7 @@ void sm_cache_put(struct sm_ftl *ftl, char *buffer, int boffset)
 }
 
 /* Read a sector from the cache */
-int sm_cache_get(struct sm_ftl *ftl, char *buffer, int boffset)
+static int sm_cache_get(struct sm_ftl *ftl, char *buffer, int boffset)
 {
 	if (test_bit(boffset / SM_SECTOR_SIZE,
 		&ftl->cache_data_invalid_bitmap))
@@ -913,7 +925,7 @@ int sm_cache_get(struct sm_ftl *ftl, char *buffer, int boffset)
 }
 
 /* Write the cache to hardware */
-int sm_cache_flush(struct sm_ftl *ftl)
+static int sm_cache_flush(struct sm_ftl *ftl)
 {
 	struct ftl_zone *zone;
 
@@ -1092,7 +1104,7 @@ static int sm_flush(struct mtd_blktrans_dev *dev)
 }
 
 /* outside interface: device is released */
-static int sm_release(struct mtd_blktrans_dev *dev)
+static void sm_release(struct mtd_blktrans_dev *dev)
 {
 	struct sm_ftl *ftl = dev->priv;
 
@@ -1101,7 +1113,6 @@ static int sm_release(struct mtd_blktrans_dev *dev)
 	cancel_work_sync(&ftl->flush_work);
 	sm_cache_flush(ftl);
 	mutex_unlock(&ftl->mutex);
-	return 0;
 }
 
 /* outside interface: get geometry */
@@ -1178,6 +1189,8 @@ static void sm_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
 	}
 
 	ftl->disk_attributes = sm_create_sysfs_attributes(ftl);
+	if (!ftl->disk_attributes)
+		goto error6;
 	trans->disk_attributes = ftl->disk_attributes;
 
 	sm_printk("Found %d MiB xD/SmartMedia FTL on mtd%d",
@@ -1238,7 +1251,7 @@ static void sm_remove_dev(struct mtd_blktrans_dev *dev)
 
 static struct mtd_blktrans_ops sm_ftl_ops = {
 	.name		= "smblk",
-	.major		= -1,
+	.major		= 0,
 	.part_bits	= SM_FTL_PARTN_BITS,
 	.blksize	= SM_SECTOR_SIZE,
 	.getgeo		= sm_getgeo,
@@ -1258,10 +1271,10 @@ static struct mtd_blktrans_ops sm_ftl_ops = {
 static __init int sm_module_init(void)
 {
 	int error = 0;
-	cache_flush_workqueue = create_freezeable_workqueue("smflush");
 
-	if (IS_ERR(cache_flush_workqueue))
-		return PTR_ERR(cache_flush_workqueue);
+	cache_flush_workqueue = create_freezable_workqueue("smflush");
+	if (!cache_flush_workqueue)
+		return -ENOMEM;
 
 	error = register_mtd_blktrans(&sm_ftl_ops);
 	if (error)
diff --git a/drivers/mtd/sm_ftl.h b/drivers/mtd/sm_ftl.h
index e30e48e7f63..43bb7300785 100644
--- a/drivers/mtd/sm_ftl.h
+++ b/drivers/mtd/sm_ftl.h
@@ -20,7 +20,7 @@
 
 
 struct ftl_zone {
-	int initialized;
+	bool initialized;
 	int16_t *lba_to_phys_table;		/* LBA to physical table */
 	struct kfifo free_sectors;	/* queue of free sectors */
 };
@@ -37,8 +37,8 @@ struct sm_ftl {
 	int zone_count;			/* number of zones */
 	int max_lba;			/* maximum lba in a zone */
 	int smallpagenand;		/* 256 bytes/page nand */
-	int readonly;			/* is FS readonly */
-	int unstable;
+	bool readonly;			/* is FS readonly */
+	bool unstable;
 	int cis_block;			/* CIS block location */
 	int cis_boffset;		/* CIS offset in the block */
 	int cis_page_offset;		/* CIS offset in the page */
@@ -49,7 +49,7 @@ struct sm_ftl {
 	int cache_zone;			/* zone of cached block */
 	unsigned char *cache_data;	/* cached block data */
 	long unsigned int cache_data_invalid_bitmap;
-	int cache_clean;
+	bool cache_clean;
 	struct work_struct flush_work;
 	struct timer_list timer;
 
diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
new file mode 100644
index 00000000000..f8acfa4310e
--- /dev/null
+++ b/drivers/mtd/spi-nor/Kconfig
@@ -0,0 +1,17 @@
+menuconfig MTD_SPI_NOR
+	tristate "SPI-NOR device support"
+	depends on MTD
+	help
+	  This is the framework for the SPI NOR which can be used by the SPI
+	  device drivers and the SPI-NOR device driver.
+
+if MTD_SPI_NOR
+
+config SPI_FSL_QUADSPI
+	tristate "Freescale Quad SPI controller"
+	depends on ARCH_MXC
+	help
+	  This enables support for the Quad SPI controller in master mode.
+	  We only connect the NOR to this controller now.
+
+endif # MTD_SPI_NOR
diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
new file mode 100644
index 00000000000..6a7ce146224
--- /dev/null
+++ b/drivers/mtd/spi-nor/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_MTD_SPI_NOR)	+= spi-nor.o
+obj-$(CONFIG_SPI_FSL_QUADSPI)	+= fsl-quadspi.o
diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
new file mode 100644
index 00000000000..8d659a2888d
--- /dev/null
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -0,0 +1,1009 @@
+/*
+ * Freescale QuadSPI driver.
+ *
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/timer.h>
+#include <linux/jiffies.h>
+#include <linux/completion.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/spi-nor.h>
+
+/* The registers */
+#define QUADSPI_MCR			0x00
+#define QUADSPI_MCR_RESERVED_SHIFT	16
+#define QUADSPI_MCR_RESERVED_MASK	(0xF << QUADSPI_MCR_RESERVED_SHIFT)
+#define QUADSPI_MCR_MDIS_SHIFT		14
+#define QUADSPI_MCR_MDIS_MASK		(1 << QUADSPI_MCR_MDIS_SHIFT)
+#define QUADSPI_MCR_CLR_TXF_SHIFT	11
+#define QUADSPI_MCR_CLR_TXF_MASK	(1 << QUADSPI_MCR_CLR_TXF_SHIFT)
+#define QUADSPI_MCR_CLR_RXF_SHIFT	10
+#define QUADSPI_MCR_CLR_RXF_MASK	(1 << QUADSPI_MCR_CLR_RXF_SHIFT)
+#define QUADSPI_MCR_DDR_EN_SHIFT	7
+#define QUADSPI_MCR_DDR_EN_MASK		(1 << QUADSPI_MCR_DDR_EN_SHIFT)
+#define QUADSPI_MCR_END_CFG_SHIFT	2
+#define QUADSPI_MCR_END_CFG_MASK	(3 << QUADSPI_MCR_END_CFG_SHIFT)
+#define QUADSPI_MCR_SWRSTHD_SHIFT	1
+#define QUADSPI_MCR_SWRSTHD_MASK	(1 << QUADSPI_MCR_SWRSTHD_SHIFT)
+#define QUADSPI_MCR_SWRSTSD_SHIFT	0
+#define QUADSPI_MCR_SWRSTSD_MASK	(1 << QUADSPI_MCR_SWRSTSD_SHIFT)
+
+#define QUADSPI_IPCR			0x08
+#define QUADSPI_IPCR_SEQID_SHIFT	24
+#define QUADSPI_IPCR_SEQID_MASK		(0xF << QUADSPI_IPCR_SEQID_SHIFT)
+
+#define QUADSPI_BUF0CR			0x10
+#define QUADSPI_BUF1CR			0x14
+#define QUADSPI_BUF2CR			0x18
+#define QUADSPI_BUFXCR_INVALID_MSTRID	0xe
+
+#define QUADSPI_BUF3CR			0x1c
+#define QUADSPI_BUF3CR_ALLMST_SHIFT	31
+#define QUADSPI_BUF3CR_ALLMST		(1 << QUADSPI_BUF3CR_ALLMST_SHIFT)
+
+#define QUADSPI_BFGENCR			0x20
+#define QUADSPI_BFGENCR_PAR_EN_SHIFT	16
+#define QUADSPI_BFGENCR_PAR_EN_MASK	(1 << (QUADSPI_BFGENCR_PAR_EN_SHIFT))
+#define QUADSPI_BFGENCR_SEQID_SHIFT	12
+#define QUADSPI_BFGENCR_SEQID_MASK	(0xF << QUADSPI_BFGENCR_SEQID_SHIFT)
+
+#define QUADSPI_BUF0IND			0x30
+#define QUADSPI_BUF1IND			0x34
+#define QUADSPI_BUF2IND			0x38
+#define QUADSPI_SFAR			0x100
+
+#define QUADSPI_SMPR			0x108
+#define QUADSPI_SMPR_DDRSMP_SHIFT	16
+#define QUADSPI_SMPR_DDRSMP_MASK	(7 << QUADSPI_SMPR_DDRSMP_SHIFT)
+#define QUADSPI_SMPR_FSDLY_SHIFT	6
+#define QUADSPI_SMPR_FSDLY_MASK		(1 << QUADSPI_SMPR_FSDLY_SHIFT)
+#define QUADSPI_SMPR_FSPHS_SHIFT	5
+#define QUADSPI_SMPR_FSPHS_MASK		(1 << QUADSPI_SMPR_FSPHS_SHIFT)
+#define QUADSPI_SMPR_HSENA_SHIFT	0
+#define QUADSPI_SMPR_HSENA_MASK		(1 << QUADSPI_SMPR_HSENA_SHIFT)
+
+#define QUADSPI_RBSR			0x10c
+#define QUADSPI_RBSR_RDBFL_SHIFT	8
+#define QUADSPI_RBSR_RDBFL_MASK		(0x3F << QUADSPI_RBSR_RDBFL_SHIFT)
+
+#define QUADSPI_RBCT			0x110
+#define QUADSPI_RBCT_WMRK_MASK		0x1F
+#define QUADSPI_RBCT_RXBRD_SHIFT	8
+#define QUADSPI_RBCT_RXBRD_USEIPS	(0x1 << QUADSPI_RBCT_RXBRD_SHIFT)
+
+#define QUADSPI_TBSR			0x150
+#define QUADSPI_TBDR			0x154
+#define QUADSPI_SR			0x15c
+#define QUADSPI_SR_IP_ACC_SHIFT		1
+#define QUADSPI_SR_IP_ACC_MASK		(0x1 << QUADSPI_SR_IP_ACC_SHIFT)
+#define QUADSPI_SR_AHB_ACC_SHIFT	2
+#define QUADSPI_SR_AHB_ACC_MASK		(0x1 << QUADSPI_SR_AHB_ACC_SHIFT)
+
+#define QUADSPI_FR			0x160
+#define QUADSPI_FR_TFF_MASK		0x1
+
+#define QUADSPI_SFA1AD			0x180
+#define QUADSPI_SFA2AD			0x184
+#define QUADSPI_SFB1AD			0x188
+#define QUADSPI_SFB2AD			0x18c
+#define QUADSPI_RBDR			0x200
+
+#define QUADSPI_LUTKEY			0x300
+#define QUADSPI_LUTKEY_VALUE		0x5AF05AF0
+
+#define QUADSPI_LCKCR			0x304
+#define QUADSPI_LCKER_LOCK		0x1
+#define QUADSPI_LCKER_UNLOCK		0x2
+
+#define QUADSPI_RSER			0x164
+#define QUADSPI_RSER_TFIE		(0x1 << 0)
+
+#define QUADSPI_LUT_BASE		0x310
+
+/*
+ * The definition of the LUT register shows below:
+ *
+ *  ---------------------------------------------------
+ *  | INSTR1 | PAD1 | OPRND1 | INSTR0 | PAD0 | OPRND0 |
+ *  ---------------------------------------------------
+ */
+#define OPRND0_SHIFT		0
+#define PAD0_SHIFT		8
+#define INSTR0_SHIFT		10
+#define OPRND1_SHIFT		16
+
+/* Instruction set for the LUT register. */
+#define LUT_STOP		0
+#define LUT_CMD			1
+#define LUT_ADDR		2
+#define LUT_DUMMY		3
+#define LUT_MODE		4
+#define LUT_MODE2		5
+#define LUT_MODE4		6
+#define LUT_READ		7
+#define LUT_WRITE		8
+#define LUT_JMP_ON_CS		9
+#define LUT_ADDR_DDR		10
+#define LUT_MODE_DDR		11
+#define LUT_MODE2_DDR		12
+#define LUT_MODE4_DDR		13
+#define LUT_READ_DDR		14
+#define LUT_WRITE_DDR		15
+#define LUT_DATA_LEARN		16
+
+/*
+ * The PAD definitions for LUT register.
+ *
+ * The pad stands for the lines number of IO[0:3].
+ * For example, the Quad read need four IO lines, so you should
+ * set LUT_PAD4 which means we use four IO lines.
+ */
+#define LUT_PAD1		0
+#define LUT_PAD2		1
+#define LUT_PAD4		2
+
+/* Oprands for the LUT register. */
+#define ADDR24BIT		0x18
+#define ADDR32BIT		0x20
+
+/* Macros for constructing the LUT register. */
+#define LUT0(ins, pad, opr)						\
+		(((opr) << OPRND0_SHIFT) | ((LUT_##pad) << PAD0_SHIFT) | \
+		((LUT_##ins) << INSTR0_SHIFT))
+
+#define LUT1(ins, pad, opr)	(LUT0(ins, pad, opr) << OPRND1_SHIFT)
+
+/* other macros for LUT register. */
+#define QUADSPI_LUT(x)          (QUADSPI_LUT_BASE + (x) * 4)
+#define QUADSPI_LUT_NUM		64
+
+/* SEQID -- we can have 16 seqids at most. */
+#define SEQID_QUAD_READ		0
+#define SEQID_WREN		1
+#define SEQID_WRDI		2
+#define SEQID_RDSR		3
+#define SEQID_SE		4
+#define SEQID_CHIP_ERASE	5
+#define SEQID_PP		6
+#define SEQID_RDID		7
+#define SEQID_WRSR		8
+#define SEQID_RDCR		9
+#define SEQID_EN4B		10
+#define SEQID_BRWR		11
+
+enum fsl_qspi_devtype {
+	FSL_QUADSPI_VYBRID,
+	FSL_QUADSPI_IMX6SX,
+};
+
+struct fsl_qspi_devtype_data {
+	enum fsl_qspi_devtype devtype;
+	int rxfifo;
+	int txfifo;
+};
+
+static struct fsl_qspi_devtype_data vybrid_data = {
+	.devtype = FSL_QUADSPI_VYBRID,
+	.rxfifo = 128,
+	.txfifo = 64
+};
+
+static struct fsl_qspi_devtype_data imx6sx_data = {
+	.devtype = FSL_QUADSPI_IMX6SX,
+	.rxfifo = 128,
+	.txfifo = 512
+};
+
+#define FSL_QSPI_MAX_CHIP	4
+struct fsl_qspi {
+	struct mtd_info mtd[FSL_QSPI_MAX_CHIP];
+	struct spi_nor nor[FSL_QSPI_MAX_CHIP];
+	void __iomem *iobase;
+	void __iomem *ahb_base; /* Used when read from AHB bus */
+	u32 memmap_phy;
+	struct clk *clk, *clk_en;
+	struct device *dev;
+	struct completion c;
+	struct fsl_qspi_devtype_data *devtype_data;
+	u32 nor_size;
+	u32 nor_num;
+	u32 clk_rate;
+	unsigned int chip_base_addr; /* We may support two chips. */
+};
+
+static inline int is_vybrid_qspi(struct fsl_qspi *q)
+{
+	return q->devtype_data->devtype == FSL_QUADSPI_VYBRID;
+}
+
+static inline int is_imx6sx_qspi(struct fsl_qspi *q)
+{
+	return q->devtype_data->devtype == FSL_QUADSPI_IMX6SX;
+}
+
+/*
+ * An IC bug makes us to re-arrange the 32-bit data.
+ * The following chips, such as IMX6SLX, have fixed this bug.
+ */
+static inline u32 fsl_qspi_endian_xchg(struct fsl_qspi *q, u32 a)
+{
+	return is_vybrid_qspi(q) ? __swab32(a) : a;
+}
+
+static inline void fsl_qspi_unlock_lut(struct fsl_qspi *q)
+{
+	writel(QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY);
+	writel(QUADSPI_LCKER_UNLOCK, q->iobase + QUADSPI_LCKCR);
+}
+
+static inline void fsl_qspi_lock_lut(struct fsl_qspi *q)
+{
+	writel(QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY);
+	writel(QUADSPI_LCKER_LOCK, q->iobase + QUADSPI_LCKCR);
+}
+
+static irqreturn_t fsl_qspi_irq_handler(int irq, void *dev_id)
+{
+	struct fsl_qspi *q = dev_id;
+	u32 reg;
+
+	/* clear interrupt */
+	reg = readl(q->iobase + QUADSPI_FR);
+	writel(reg, q->iobase + QUADSPI_FR);
+
+	if (reg & QUADSPI_FR_TFF_MASK)
+		complete(&q->c);
+
+	dev_dbg(q->dev, "QUADSPI_FR : 0x%.8x:0x%.8x\n", q->chip_base_addr, reg);
+	return IRQ_HANDLED;
+}
+
+static void fsl_qspi_init_lut(struct fsl_qspi *q)
+{
+	void __iomem *base = q->iobase;
+	int rxfifo = q->devtype_data->rxfifo;
+	u32 lut_base;
+	u8 cmd, addrlen, dummy;
+	int i;
+
+	fsl_qspi_unlock_lut(q);
+
+	/* Clear all the LUT table */
+	for (i = 0; i < QUADSPI_LUT_NUM; i++)
+		writel(0, base + QUADSPI_LUT_BASE + i * 4);
+
+	/* Quad Read */
+	lut_base = SEQID_QUAD_READ * 4;
+
+	if (q->nor_size <= SZ_16M) {
+		cmd = SPINOR_OP_READ_1_1_4;
+		addrlen = ADDR24BIT;
+		dummy = 8;
+	} else {
+		/* use the 4-byte address */
+		cmd = SPINOR_OP_READ_1_1_4;
+		addrlen = ADDR32BIT;
+		dummy = 8;
+	}
+
+	writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
+			base + QUADSPI_LUT(lut_base));
+	writel(LUT0(DUMMY, PAD1, dummy) | LUT1(READ, PAD4, rxfifo),
+			base + QUADSPI_LUT(lut_base + 1));
+
+	/* Write enable */
+	lut_base = SEQID_WREN * 4;
+	writel(LUT0(CMD, PAD1, SPINOR_OP_WREN), base + QUADSPI_LUT(lut_base));
+
+	/* Page Program */
+	lut_base = SEQID_PP * 4;
+
+	if (q->nor_size <= SZ_16M) {
+		cmd = SPINOR_OP_PP;
+		addrlen = ADDR24BIT;
+	} else {
+		/* use the 4-byte address */
+		cmd = SPINOR_OP_PP;
+		addrlen = ADDR32BIT;
+	}
+
+	writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
+			base + QUADSPI_LUT(lut_base));
+	writel(LUT0(WRITE, PAD1, 0), base + QUADSPI_LUT(lut_base + 1));
+
+	/* Read Status */
+	lut_base = SEQID_RDSR * 4;
+	writel(LUT0(CMD, PAD1, SPINOR_OP_RDSR) | LUT1(READ, PAD1, 0x1),
+			base + QUADSPI_LUT(lut_base));
+
+	/* Erase a sector */
+	lut_base = SEQID_SE * 4;
+
+	if (q->nor_size <= SZ_16M) {
+		cmd = SPINOR_OP_SE;
+		addrlen = ADDR24BIT;
+	} else {
+		/* use the 4-byte address */
+		cmd = SPINOR_OP_SE;
+		addrlen = ADDR32BIT;
+	}
+
+	writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
+			base + QUADSPI_LUT(lut_base));
+
+	/* Erase the whole chip */
+	lut_base = SEQID_CHIP_ERASE * 4;
+	writel(LUT0(CMD, PAD1, SPINOR_OP_CHIP_ERASE),
+			base + QUADSPI_LUT(lut_base));
+
+	/* READ ID */
+	lut_base = SEQID_RDID * 4;
+	writel(LUT0(CMD, PAD1, SPINOR_OP_RDID) | LUT1(READ, PAD1, 0x8),
+			base + QUADSPI_LUT(lut_base));
+
+	/* Write Register */
+	lut_base = SEQID_WRSR * 4;
+	writel(LUT0(CMD, PAD1, SPINOR_OP_WRSR) | LUT1(WRITE, PAD1, 0x2),
+			base + QUADSPI_LUT(lut_base));
+
+	/* Read Configuration Register */
+	lut_base = SEQID_RDCR * 4;
+	writel(LUT0(CMD, PAD1, SPINOR_OP_RDCR) | LUT1(READ, PAD1, 0x1),
+			base + QUADSPI_LUT(lut_base));
+
+	/* Write disable */
+	lut_base = SEQID_WRDI * 4;
+	writel(LUT0(CMD, PAD1, SPINOR_OP_WRDI), base + QUADSPI_LUT(lut_base));
+
+	/* Enter 4 Byte Mode (Micron) */
+	lut_base = SEQID_EN4B * 4;
+	writel(LUT0(CMD, PAD1, SPINOR_OP_EN4B), base + QUADSPI_LUT(lut_base));
+
+	/* Enter 4 Byte Mode (Spansion) */
+	lut_base = SEQID_BRWR * 4;
+	writel(LUT0(CMD, PAD1, SPINOR_OP_BRWR), base + QUADSPI_LUT(lut_base));
+
+	fsl_qspi_lock_lut(q);
+}
+
+/* Get the SEQID for the command */
+static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd)
+{
+	switch (cmd) {
+	case SPINOR_OP_READ_1_1_4:
+		return SEQID_QUAD_READ;
+	case SPINOR_OP_WREN:
+		return SEQID_WREN;
+	case SPINOR_OP_WRDI:
+		return SEQID_WRDI;
+	case SPINOR_OP_RDSR:
+		return SEQID_RDSR;
+	case SPINOR_OP_SE:
+		return SEQID_SE;
+	case SPINOR_OP_CHIP_ERASE:
+		return SEQID_CHIP_ERASE;
+	case SPINOR_OP_PP:
+		return SEQID_PP;
+	case SPINOR_OP_RDID:
+		return SEQID_RDID;
+	case SPINOR_OP_WRSR:
+		return SEQID_WRSR;
+	case SPINOR_OP_RDCR:
+		return SEQID_RDCR;
+	case SPINOR_OP_EN4B:
+		return SEQID_EN4B;
+	case SPINOR_OP_BRWR:
+		return SEQID_BRWR;
+	default:
+		dev_err(q->dev, "Unsupported cmd 0x%.2x\n", cmd);
+		break;
+	}
+	return -EINVAL;
+}
+
+static int
+fsl_qspi_runcmd(struct fsl_qspi *q, u8 cmd, unsigned int addr, int len)
+{
+	void __iomem *base = q->iobase;
+	int seqid;
+	u32 reg, reg2;
+	int err;
+
+	init_completion(&q->c);
+	dev_dbg(q->dev, "to 0x%.8x:0x%.8x, len:%d, cmd:%.2x\n",
+			q->chip_base_addr, addr, len, cmd);
+
+	/* save the reg */
+	reg = readl(base + QUADSPI_MCR);
+
+	writel(q->memmap_phy + q->chip_base_addr + addr, base + QUADSPI_SFAR);
+	writel(QUADSPI_RBCT_WMRK_MASK | QUADSPI_RBCT_RXBRD_USEIPS,
+			base + QUADSPI_RBCT);
+	writel(reg | QUADSPI_MCR_CLR_RXF_MASK, base + QUADSPI_MCR);
+
+	do {
+		reg2 = readl(base + QUADSPI_SR);
+		if (reg2 & (QUADSPI_SR_IP_ACC_MASK | QUADSPI_SR_AHB_ACC_MASK)) {
+			udelay(1);
+			dev_dbg(q->dev, "The controller is busy, 0x%x\n", reg2);
+			continue;
+		}
+		break;
+	} while (1);
+
+	/* trigger the LUT now */
+	seqid = fsl_qspi_get_seqid(q, cmd);
+	writel((seqid << QUADSPI_IPCR_SEQID_SHIFT) | len, base + QUADSPI_IPCR);
+
+	/* Wait for the interrupt. */
+	err = wait_for_completion_timeout(&q->c, msecs_to_jiffies(1000));
+	if (!err) {
+		dev_err(q->dev,
+			"cmd 0x%.2x timeout, addr@%.8x, FR:0x%.8x, SR:0x%.8x\n",
+			cmd, addr, readl(base + QUADSPI_FR),
+			readl(base + QUADSPI_SR));
+		err = -ETIMEDOUT;
+	} else {
+		err = 0;
+	}
+
+	/* restore the MCR */
+	writel(reg, base + QUADSPI_MCR);
+
+	return err;
+}
+
+/* Read out the data from the QUADSPI_RBDR buffer registers. */
+static void fsl_qspi_read_data(struct fsl_qspi *q, int len, u8 *rxbuf)
+{
+	u32 tmp;
+	int i = 0;
+
+	while (len > 0) {
+		tmp = readl(q->iobase + QUADSPI_RBDR + i * 4);
+		tmp = fsl_qspi_endian_xchg(q, tmp);
+		dev_dbg(q->dev, "chip addr:0x%.8x, rcv:0x%.8x\n",
+				q->chip_base_addr, tmp);
+
+		if (len >= 4) {
+			*((u32 *)rxbuf) = tmp;
+			rxbuf += 4;
+		} else {
+			memcpy(rxbuf, &tmp, len);
+			break;
+		}
+
+		len -= 4;
+		i++;
+	}
+}
+
+/*
+ * If we have changed the content of the flash by writing or erasing,
+ * we need to invalidate the AHB buffer. If we do not do so, we may read out
+ * the wrong data. The spec tells us reset the AHB domain and Serial Flash
+ * domain at the same time.
+ */
+static inline void fsl_qspi_invalid(struct fsl_qspi *q)
+{
+	u32 reg;
+
+	reg = readl(q->iobase + QUADSPI_MCR);
+	reg |= QUADSPI_MCR_SWRSTHD_MASK | QUADSPI_MCR_SWRSTSD_MASK;
+	writel(reg, q->iobase + QUADSPI_MCR);
+
+	/*
+	 * The minimum delay : 1 AHB + 2 SFCK clocks.
+	 * Delay 1 us is enough.
+	 */
+	udelay(1);
+
+	reg &= ~(QUADSPI_MCR_SWRSTHD_MASK | QUADSPI_MCR_SWRSTSD_MASK);
+	writel(reg, q->iobase + QUADSPI_MCR);
+}
+
+static int fsl_qspi_nor_write(struct fsl_qspi *q, struct spi_nor *nor,
+				u8 opcode, unsigned int to, u32 *txbuf,
+				unsigned count, size_t *retlen)
+{
+	int ret, i, j;
+	u32 tmp;
+
+	dev_dbg(q->dev, "to 0x%.8x:0x%.8x, len : %d\n",
+		q->chip_base_addr, to, count);
+
+	/* clear the TX FIFO. */
+	tmp = readl(q->iobase + QUADSPI_MCR);
+	writel(tmp | QUADSPI_MCR_CLR_RXF_MASK, q->iobase + QUADSPI_MCR);
+
+	/* fill the TX data to the FIFO */
+	for (j = 0, i = ((count + 3) / 4); j < i; j++) {
+		tmp = fsl_qspi_endian_xchg(q, *txbuf);
+		writel(tmp, q->iobase + QUADSPI_TBDR);
+		txbuf++;
+	}
+
+	/* Trigger it */
+	ret = fsl_qspi_runcmd(q, opcode, to, count);
+
+	if (ret == 0 && retlen)
+		*retlen += count;
+
+	return ret;
+}
+
+static void fsl_qspi_set_map_addr(struct fsl_qspi *q)
+{
+	int nor_size = q->nor_size;
+	void __iomem *base = q->iobase;
+
+	writel(nor_size + q->memmap_phy, base + QUADSPI_SFA1AD);
+	writel(nor_size * 2 + q->memmap_phy, base + QUADSPI_SFA2AD);
+	writel(nor_size * 3 + q->memmap_phy, base + QUADSPI_SFB1AD);
+	writel(nor_size * 4 + q->memmap_phy, base + QUADSPI_SFB2AD);
+}
+
+/*
+ * There are two different ways to read out the data from the flash:
+ *  the "IP Command Read" and the "AHB Command Read".
+ *
+ * The IC guy suggests we use the "AHB Command Read" which is faster
+ * then the "IP Command Read". (What's more is that there is a bug in
+ * the "IP Command Read" in the Vybrid.)
+ *
+ * After we set up the registers for the "AHB Command Read", we can use
+ * the memcpy to read the data directly. A "missed" access to the buffer
+ * causes the controller to clear the buffer, and use the sequence pointed
+ * by the QUADSPI_BFGENCR[SEQID] to initiate a read from the flash.
+ */
+static void fsl_qspi_init_abh_read(struct fsl_qspi *q)
+{
+	void __iomem *base = q->iobase;
+	int seqid;
+
+	/* AHB configuration for access buffer 0/1/2 .*/
+	writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF0CR);
+	writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF1CR);
+	writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF2CR);
+	writel(QUADSPI_BUF3CR_ALLMST, base + QUADSPI_BUF3CR);
+
+	/* We only use the buffer3 */
+	writel(0, base + QUADSPI_BUF0IND);
+	writel(0, base + QUADSPI_BUF1IND);
+	writel(0, base + QUADSPI_BUF2IND);
+
+	/* Set the default lut sequence for AHB Read. */
+	seqid = fsl_qspi_get_seqid(q, q->nor[0].read_opcode);
+	writel(seqid << QUADSPI_BFGENCR_SEQID_SHIFT,
+		q->iobase + QUADSPI_BFGENCR);
+}
+
+/* We use this function to do some basic init for spi_nor_scan(). */
+static int fsl_qspi_nor_setup(struct fsl_qspi *q)
+{
+	void __iomem *base = q->iobase;
+	u32 reg;
+	int ret;
+
+	/* the default frequency, we will change it in the future.*/
+	ret = clk_set_rate(q->clk, 66000000);
+	if (ret)
+		return ret;
+
+	/* Init the LUT table. */
+	fsl_qspi_init_lut(q);
+
+	/* Disable the module */
+	writel(QUADSPI_MCR_MDIS_MASK | QUADSPI_MCR_RESERVED_MASK,
+			base + QUADSPI_MCR);
+
+	reg = readl(base + QUADSPI_SMPR);
+	writel(reg & ~(QUADSPI_SMPR_FSDLY_MASK
+			| QUADSPI_SMPR_FSPHS_MASK
+			| QUADSPI_SMPR_HSENA_MASK
+			| QUADSPI_SMPR_DDRSMP_MASK), base + QUADSPI_SMPR);
+
+	/* Enable the module */
+	writel(QUADSPI_MCR_RESERVED_MASK | QUADSPI_MCR_END_CFG_MASK,
+			base + QUADSPI_MCR);
+
+	/* enable the interrupt */
+	writel(QUADSPI_RSER_TFIE, q->iobase + QUADSPI_RSER);
+
+	return 0;
+}
+
+static int fsl_qspi_nor_setup_last(struct fsl_qspi *q)
+{
+	unsigned long rate = q->clk_rate;
+	int ret;
+
+	if (is_imx6sx_qspi(q))
+		rate *= 4;
+
+	ret = clk_set_rate(q->clk, rate);
+	if (ret)
+		return ret;
+
+	/* Init the LUT table again. */
+	fsl_qspi_init_lut(q);
+
+	/* Init for AHB read */
+	fsl_qspi_init_abh_read(q);
+
+	return 0;
+}
+
+static struct of_device_id fsl_qspi_dt_ids[] = {
+	{ .compatible = "fsl,vf610-qspi", .data = (void *)&vybrid_data, },
+	{ .compatible = "fsl,imx6sx-qspi", .data = (void *)&imx6sx_data, },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, fsl_qspi_dt_ids);
+
+static void fsl_qspi_set_base_addr(struct fsl_qspi *q, struct spi_nor *nor)
+{
+	q->chip_base_addr = q->nor_size * (nor - q->nor);
+}
+
+static int fsl_qspi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
+{
+	int ret;
+	struct fsl_qspi *q = nor->priv;
+
+	ret = fsl_qspi_runcmd(q, opcode, 0, len);
+	if (ret)
+		return ret;
+
+	fsl_qspi_read_data(q, len, buf);
+	return 0;
+}
+
+static int fsl_qspi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len,
+			int write_enable)
+{
+	struct fsl_qspi *q = nor->priv;
+	int ret;
+
+	if (!buf) {
+		ret = fsl_qspi_runcmd(q, opcode, 0, 1);
+		if (ret)
+			return ret;
+
+		if (opcode == SPINOR_OP_CHIP_ERASE)
+			fsl_qspi_invalid(q);
+
+	} else if (len > 0) {
+		ret = fsl_qspi_nor_write(q, nor, opcode, 0,
+					(u32 *)buf, len, NULL);
+	} else {
+		dev_err(q->dev, "invalid cmd %d\n", opcode);
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static void fsl_qspi_write(struct spi_nor *nor, loff_t to,
+		size_t len, size_t *retlen, const u_char *buf)
+{
+	struct fsl_qspi *q = nor->priv;
+
+	fsl_qspi_nor_write(q, nor, nor->program_opcode, to,
+				(u32 *)buf, len, retlen);
+
+	/* invalid the data in the AHB buffer. */
+	fsl_qspi_invalid(q);
+}
+
+static int fsl_qspi_read(struct spi_nor *nor, loff_t from,
+		size_t len, size_t *retlen, u_char *buf)
+{
+	struct fsl_qspi *q = nor->priv;
+	u8 cmd = nor->read_opcode;
+	int ret;
+
+	dev_dbg(q->dev, "cmd [%x],read from (0x%p, 0x%.8x, 0x%.8x),len:%d\n",
+		cmd, q->ahb_base, q->chip_base_addr, (unsigned int)from, len);
+
+	/* Wait until the previous command is finished. */
+	ret = nor->wait_till_ready(nor);
+	if (ret)
+		return ret;
+
+	/* Read out the data directly from the AHB buffer.*/
+	memcpy(buf, q->ahb_base + q->chip_base_addr + from, len);
+
+	*retlen += len;
+	return 0;
+}
+
+static int fsl_qspi_erase(struct spi_nor *nor, loff_t offs)
+{
+	struct fsl_qspi *q = nor->priv;
+	int ret;
+
+	dev_dbg(nor->dev, "%dKiB at 0x%08x:0x%08x\n",
+		nor->mtd->erasesize / 1024, q->chip_base_addr, (u32)offs);
+
+	/* Wait until finished previous write command. */
+	ret = nor->wait_till_ready(nor);
+	if (ret)
+		return ret;
+
+	/* Send write enable, then erase commands. */
+	ret = nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0, 0);
+	if (ret)
+		return ret;
+
+	ret = fsl_qspi_runcmd(q, nor->erase_opcode, offs, 0);
+	if (ret)
+		return ret;
+
+	fsl_qspi_invalid(q);
+	return 0;
+}
+
+static int fsl_qspi_prep(struct spi_nor *nor, enum spi_nor_ops ops)
+{
+	struct fsl_qspi *q = nor->priv;
+	int ret;
+
+	ret = clk_enable(q->clk_en);
+	if (ret)
+		return ret;
+
+	ret = clk_enable(q->clk);
+	if (ret) {
+		clk_disable(q->clk_en);
+		return ret;
+	}
+
+	fsl_qspi_set_base_addr(q, nor);
+	return 0;
+}
+
+static void fsl_qspi_unprep(struct spi_nor *nor, enum spi_nor_ops ops)
+{
+	struct fsl_qspi *q = nor->priv;
+
+	clk_disable(q->clk);
+	clk_disable(q->clk_en);
+}
+
+static int fsl_qspi_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct mtd_part_parser_data ppdata;
+	struct device *dev = &pdev->dev;
+	struct fsl_qspi *q;
+	struct resource *res;
+	struct spi_nor *nor;
+	struct mtd_info *mtd;
+	int ret, i = 0;
+	bool has_second_chip = false;
+	const struct of_device_id *of_id =
+			of_match_device(fsl_qspi_dt_ids, &pdev->dev);
+
+	q = devm_kzalloc(dev, sizeof(*q), GFP_KERNEL);
+	if (!q)
+		return -ENOMEM;
+
+	q->nor_num = of_get_child_count(dev->of_node);
+	if (!q->nor_num || q->nor_num > FSL_QSPI_MAX_CHIP)
+		return -ENODEV;
+
+	/* find the resources */
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "QuadSPI");
+	q->iobase = devm_ioremap_resource(dev, res);
+	if (IS_ERR(q->iobase)) {
+		ret = PTR_ERR(q->iobase);
+		goto map_failed;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+					"QuadSPI-memory");
+	q->ahb_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(q->ahb_base)) {
+		ret = PTR_ERR(q->ahb_base);
+		goto map_failed;
+	}
+	q->memmap_phy = res->start;
+
+	/* find the clocks */
+	q->clk_en = devm_clk_get(dev, "qspi_en");
+	if (IS_ERR(q->clk_en)) {
+		ret = PTR_ERR(q->clk_en);
+		goto map_failed;
+	}
+
+	q->clk = devm_clk_get(dev, "qspi");
+	if (IS_ERR(q->clk)) {
+		ret = PTR_ERR(q->clk);
+		goto map_failed;
+	}
+
+	ret = clk_prepare_enable(q->clk_en);
+	if (ret) {
+		dev_err(dev, "can not enable the qspi_en clock\n");
+		goto map_failed;
+	}
+
+	ret = clk_prepare_enable(q->clk);
+	if (ret) {
+		clk_disable_unprepare(q->clk_en);
+		dev_err(dev, "can not enable the qspi clock\n");
+		goto map_failed;
+	}
+
+	/* find the irq */
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0) {
+		dev_err(dev, "failed to get the irq\n");
+		goto irq_failed;
+	}
+
+	ret = devm_request_irq(dev, ret,
+			fsl_qspi_irq_handler, 0, pdev->name, q);
+	if (ret) {
+		dev_err(dev, "failed to request irq.\n");
+		goto irq_failed;
+	}
+
+	q->dev = dev;
+	q->devtype_data = (struct fsl_qspi_devtype_data *)of_id->data;
+	platform_set_drvdata(pdev, q);
+
+	ret = fsl_qspi_nor_setup(q);
+	if (ret)
+		goto irq_failed;
+
+	if (of_get_property(np, "fsl,qspi-has-second-chip", NULL))
+		has_second_chip = true;
+
+	/* iterate the subnodes. */
+	for_each_available_child_of_node(dev->of_node, np) {
+		const struct spi_device_id *id;
+		char modalias[40];
+
+		/* skip the holes */
+		if (!has_second_chip)
+			i *= 2;
+
+		nor = &q->nor[i];
+		mtd = &q->mtd[i];
+
+		nor->mtd = mtd;
+		nor->dev = dev;
+		nor->priv = q;
+		mtd->priv = nor;
+
+		/* fill the hooks */
+		nor->read_reg = fsl_qspi_read_reg;
+		nor->write_reg = fsl_qspi_write_reg;
+		nor->read = fsl_qspi_read;
+		nor->write = fsl_qspi_write;
+		nor->erase = fsl_qspi_erase;
+
+		nor->prepare = fsl_qspi_prep;
+		nor->unprepare = fsl_qspi_unprep;
+
+		if (of_modalias_node(np, modalias, sizeof(modalias)) < 0)
+			goto map_failed;
+
+		id = spi_nor_match_id(modalias);
+		if (!id)
+			goto map_failed;
+
+		ret = of_property_read_u32(np, "spi-max-frequency",
+				&q->clk_rate);
+		if (ret < 0)
+			goto map_failed;
+
+		/* set the chip address for READID */
+		fsl_qspi_set_base_addr(q, nor);
+
+		ret = spi_nor_scan(nor, id, SPI_NOR_QUAD);
+		if (ret)
+			goto map_failed;
+
+		ppdata.of_node = np;
+		ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
+		if (ret)
+			goto map_failed;
+
+		/* Set the correct NOR size now. */
+		if (q->nor_size == 0) {
+			q->nor_size = mtd->size;
+
+			/* Map the SPI NOR to accessiable address */
+			fsl_qspi_set_map_addr(q);
+		}
+
+		/*
+		 * The TX FIFO is 64 bytes in the Vybrid, but the Page Program
+		 * may writes 265 bytes per time. The write is working in the
+		 * unit of the TX FIFO, not in the unit of the SPI NOR's page
+		 * size.
+		 *
+		 * So shrink the spi_nor->page_size if it is larger then the
+		 * TX FIFO.
+		 */
+		if (nor->page_size > q->devtype_data->txfifo)
+			nor->page_size = q->devtype_data->txfifo;
+
+		i++;
+	}
+
+	/* finish the rest init. */
+	ret = fsl_qspi_nor_setup_last(q);
+	if (ret)
+		goto last_init_failed;
+
+	clk_disable(q->clk);
+	clk_disable(q->clk_en);
+	dev_info(dev, "QuadSPI SPI NOR flash driver\n");
+	return 0;
+
+last_init_failed:
+	for (i = 0; i < q->nor_num; i++)
+		mtd_device_unregister(&q->mtd[i]);
+
+irq_failed:
+	clk_disable_unprepare(q->clk);
+	clk_disable_unprepare(q->clk_en);
+map_failed:
+	dev_err(dev, "Freescale QuadSPI probe failed\n");
+	return ret;
+}
+
+static int fsl_qspi_remove(struct platform_device *pdev)
+{
+	struct fsl_qspi *q = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < q->nor_num; i++)
+		mtd_device_unregister(&q->mtd[i]);
+
+	/* disable the hardware */
+	writel(QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR);
+	writel(0x0, q->iobase + QUADSPI_RSER);
+
+	clk_unprepare(q->clk);
+	clk_unprepare(q->clk_en);
+	return 0;
+}
+
+static struct platform_driver fsl_qspi_driver = {
+	.driver = {
+		.name	= "fsl-quadspi",
+		.bus	= &platform_bus_type,
+		.owner	= THIS_MODULE,
+		.of_match_table = fsl_qspi_dt_ids,
+	},
+	.probe          = fsl_qspi_probe,
+	.remove		= fsl_qspi_remove,
+};
+module_platform_driver(fsl_qspi_driver);
+
+MODULE_DESCRIPTION("Freescale QuadSPI Controller Driver");
+MODULE_AUTHOR("Freescale Semiconductor Inc.");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
new file mode 100644
index 00000000000..c713c865671
--- /dev/null
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -0,0 +1,1107 @@
+/*
+ * Based on m25p80.c, by Mike Lavender (mike@steroidmicros.com), with
+ * influence from lart.c (Abraham Van Der Merwe) and mtd_dataflash.c
+ *
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/math64.h>
+
+#include <linux/mtd/cfi.h>
+#include <linux/mtd/mtd.h>
+#include <linux/of_platform.h>
+#include <linux/spi/flash.h>
+#include <linux/mtd/spi-nor.h>
+
+/* Define max times to check status register before we give up. */
+#define	MAX_READY_WAIT_JIFFIES	(40 * HZ) /* M25P16 specs 40s max chip erase */
+
+#define JEDEC_MFR(_jedec_id)	((_jedec_id) >> 16)
+
+/*
+ * Read the status register, returning its value in the location
+ * Return the status register value.
+ * Returns negative if error occurred.
+ */
+static int read_sr(struct spi_nor *nor)
+{
+	int ret;
+	u8 val;
+
+	ret = nor->read_reg(nor, SPINOR_OP_RDSR, &val, 1);
+	if (ret < 0) {
+		pr_err("error %d reading SR\n", (int) ret);
+		return ret;
+	}
+
+	return val;
+}
+
+/*
+ * Read configuration register, returning its value in the
+ * location. Return the configuration register value.
+ * Returns negative if error occured.
+ */
+static int read_cr(struct spi_nor *nor)
+{
+	int ret;
+	u8 val;
+
+	ret = nor->read_reg(nor, SPINOR_OP_RDCR, &val, 1);
+	if (ret < 0) {
+		dev_err(nor->dev, "error %d reading CR\n", ret);
+		return ret;
+	}
+
+	return val;
+}
+
+/*
+ * Dummy Cycle calculation for different type of read.
+ * It can be used to support more commands with
+ * different dummy cycle requirements.
+ */
+static inline int spi_nor_read_dummy_cycles(struct spi_nor *nor)
+{
+	switch (nor->flash_read) {
+	case SPI_NOR_FAST:
+	case SPI_NOR_DUAL:
+	case SPI_NOR_QUAD:
+		return 1;
+	case SPI_NOR_NORMAL:
+		return 0;
+	}
+	return 0;
+}
+
+/*
+ * Write status register 1 byte
+ * Returns negative if error occurred.
+ */
+static inline int write_sr(struct spi_nor *nor, u8 val)
+{
+	nor->cmd_buf[0] = val;
+	return nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 1, 0);
+}
+
+/*
+ * Set write enable latch with Write Enable command.
+ * Returns negative if error occurred.
+ */
+static inline int write_enable(struct spi_nor *nor)
+{
+	return nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0, 0);
+}
+
+/*
+ * Send write disble instruction to the chip.
+ */
+static inline int write_disable(struct spi_nor *nor)
+{
+	return nor->write_reg(nor, SPINOR_OP_WRDI, NULL, 0, 0);
+}
+
+static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd)
+{
+	return mtd->priv;
+}
+
+/* Enable/disable 4-byte addressing mode. */
+static inline int set_4byte(struct spi_nor *nor, u32 jedec_id, int enable)
+{
+	int status;
+	bool need_wren = false;
+	u8 cmd;
+
+	switch (JEDEC_MFR(jedec_id)) {
+	case CFI_MFR_ST: /* Micron, actually */
+		/* Some Micron need WREN command; all will accept it */
+		need_wren = true;
+	case CFI_MFR_MACRONIX:
+	case 0xEF /* winbond */:
+		if (need_wren)
+			write_enable(nor);
+
+		cmd = enable ? SPINOR_OP_EN4B : SPINOR_OP_EX4B;
+		status = nor->write_reg(nor, cmd, NULL, 0, 0);
+		if (need_wren)
+			write_disable(nor);
+
+		return status;
+	default:
+		/* Spansion style */
+		nor->cmd_buf[0] = enable << 7;
+		return nor->write_reg(nor, SPINOR_OP_BRWR, nor->cmd_buf, 1, 0);
+	}
+}
+
+static int spi_nor_wait_till_ready(struct spi_nor *nor)
+{
+	unsigned long deadline;
+	int sr;
+
+	deadline = jiffies + MAX_READY_WAIT_JIFFIES;
+
+	do {
+		cond_resched();
+
+		sr = read_sr(nor);
+		if (sr < 0)
+			break;
+		else if (!(sr & SR_WIP))
+			return 0;
+	} while (!time_after_eq(jiffies, deadline));
+
+	return -ETIMEDOUT;
+}
+
+/*
+ * Service routine to read status register until ready, or timeout occurs.
+ * Returns non-zero if error.
+ */
+static int wait_till_ready(struct spi_nor *nor)
+{
+	return nor->wait_till_ready(nor);
+}
+
+/*
+ * Erase the whole flash memory
+ *
+ * Returns 0 if successful, non-zero otherwise.
+ */
+static int erase_chip(struct spi_nor *nor)
+{
+	int ret;
+
+	dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd->size >> 10));
+
+	/* Wait until finished previous write command. */
+	ret = wait_till_ready(nor);
+	if (ret)
+		return ret;
+
+	/* Send write enable, then erase commands. */
+	write_enable(nor);
+
+	return nor->write_reg(nor, SPINOR_OP_CHIP_ERASE, NULL, 0, 0);
+}
+
+static int spi_nor_lock_and_prep(struct spi_nor *nor, enum spi_nor_ops ops)
+{
+	int ret = 0;
+
+	mutex_lock(&nor->lock);
+
+	if (nor->prepare) {
+		ret = nor->prepare(nor, ops);
+		if (ret) {
+			dev_err(nor->dev, "failed in the preparation.\n");
+			mutex_unlock(&nor->lock);
+			return ret;
+		}
+	}
+	return ret;
+}
+
+static void spi_nor_unlock_and_unprep(struct spi_nor *nor, enum spi_nor_ops ops)
+{
+	if (nor->unprepare)
+		nor->unprepare(nor, ops);
+	mutex_unlock(&nor->lock);
+}
+
+/*
+ * Erase an address range on the nor chip.  The address range may extend
+ * one or more erase sectors.  Return an error is there is a problem erasing.
+ */
+static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	u32 addr, len;
+	uint32_t rem;
+	int ret;
+
+	dev_dbg(nor->dev, "at 0x%llx, len %lld\n", (long long)instr->addr,
+			(long long)instr->len);
+
+	div_u64_rem(instr->len, mtd->erasesize, &rem);
+	if (rem)
+		return -EINVAL;
+
+	addr = instr->addr;
+	len = instr->len;
+
+	ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_ERASE);
+	if (ret)
+		return ret;
+
+	/* whole-chip erase? */
+	if (len == mtd->size) {
+		if (erase_chip(nor)) {
+			ret = -EIO;
+			goto erase_err;
+		}
+
+	/* REVISIT in some cases we could speed up erasing large regions
+	 * by using SPINOR_OP_SE instead of SPINOR_OP_BE_4K.  We may have set up
+	 * to use "small sector erase", but that's not always optimal.
+	 */
+
+	/* "sector"-at-a-time erase */
+	} else {
+		while (len) {
+			if (nor->erase(nor, addr)) {
+				ret = -EIO;
+				goto erase_err;
+			}
+
+			addr += mtd->erasesize;
+			len -= mtd->erasesize;
+		}
+	}
+
+	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE);
+
+	instr->state = MTD_ERASE_DONE;
+	mtd_erase_callback(instr);
+
+	return ret;
+
+erase_err:
+	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE);
+	instr->state = MTD_ERASE_FAILED;
+	return ret;
+}
+
+static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	uint32_t offset = ofs;
+	uint8_t status_old, status_new;
+	int ret = 0;
+
+	ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_LOCK);
+	if (ret)
+		return ret;
+
+	/* Wait until finished previous command */
+	ret = wait_till_ready(nor);
+	if (ret)
+		goto err;
+
+	status_old = read_sr(nor);
+
+	if (offset < mtd->size - (mtd->size / 2))
+		status_new = status_old | SR_BP2 | SR_BP1 | SR_BP0;
+	else if (offset < mtd->size - (mtd->size / 4))
+		status_new = (status_old & ~SR_BP0) | SR_BP2 | SR_BP1;
+	else if (offset < mtd->size - (mtd->size / 8))
+		status_new = (status_old & ~SR_BP1) | SR_BP2 | SR_BP0;
+	else if (offset < mtd->size - (mtd->size / 16))
+		status_new = (status_old & ~(SR_BP0 | SR_BP1)) | SR_BP2;
+	else if (offset < mtd->size - (mtd->size / 32))
+		status_new = (status_old & ~SR_BP2) | SR_BP1 | SR_BP0;
+	else if (offset < mtd->size - (mtd->size / 64))
+		status_new = (status_old & ~(SR_BP2 | SR_BP0)) | SR_BP1;
+	else
+		status_new = (status_old & ~(SR_BP2 | SR_BP1)) | SR_BP0;
+
+	/* Only modify protection if it will not unlock other areas */
+	if ((status_new & (SR_BP2 | SR_BP1 | SR_BP0)) >
+				(status_old & (SR_BP2 | SR_BP1 | SR_BP0))) {
+		write_enable(nor);
+		ret = write_sr(nor, status_new);
+		if (ret)
+			goto err;
+	}
+
+err:
+	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_LOCK);
+	return ret;
+}
+
+static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	uint32_t offset = ofs;
+	uint8_t status_old, status_new;
+	int ret = 0;
+
+	ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_UNLOCK);
+	if (ret)
+		return ret;
+
+	/* Wait until finished previous command */
+	ret = wait_till_ready(nor);
+	if (ret)
+		goto err;
+
+	status_old = read_sr(nor);
+
+	if (offset+len > mtd->size - (mtd->size / 64))
+		status_new = status_old & ~(SR_BP2 | SR_BP1 | SR_BP0);
+	else if (offset+len > mtd->size - (mtd->size / 32))
+		status_new = (status_old & ~(SR_BP2 | SR_BP1)) | SR_BP0;
+	else if (offset+len > mtd->size - (mtd->size / 16))
+		status_new = (status_old & ~(SR_BP2 | SR_BP0)) | SR_BP1;
+	else if (offset+len > mtd->size - (mtd->size / 8))
+		status_new = (status_old & ~SR_BP2) | SR_BP1 | SR_BP0;
+	else if (offset+len > mtd->size - (mtd->size / 4))
+		status_new = (status_old & ~(SR_BP0 | SR_BP1)) | SR_BP2;
+	else if (offset+len > mtd->size - (mtd->size / 2))
+		status_new = (status_old & ~SR_BP1) | SR_BP2 | SR_BP0;
+	else
+		status_new = (status_old & ~SR_BP0) | SR_BP2 | SR_BP1;
+
+	/* Only modify protection if it will not lock other areas */
+	if ((status_new & (SR_BP2 | SR_BP1 | SR_BP0)) <
+				(status_old & (SR_BP2 | SR_BP1 | SR_BP0))) {
+		write_enable(nor);
+		ret = write_sr(nor, status_new);
+		if (ret)
+			goto err;
+	}
+
+err:
+	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_UNLOCK);
+	return ret;
+}
+
+struct flash_info {
+	/* JEDEC id zero means "no ID" (most older chips); otherwise it has
+	 * a high byte of zero plus three data bytes: the manufacturer id,
+	 * then a two byte device id.
+	 */
+	u32		jedec_id;
+	u16             ext_id;
+
+	/* The size listed here is what works with SPINOR_OP_SE, which isn't
+	 * necessarily called a "sector" by the vendor.
+	 */
+	unsigned	sector_size;
+	u16		n_sectors;
+
+	u16		page_size;
+	u16		addr_width;
+
+	u16		flags;
+#define	SECT_4K			0x01	/* SPINOR_OP_BE_4K works uniformly */
+#define	SPI_NOR_NO_ERASE	0x02	/* No erase command needed */
+#define	SST_WRITE		0x04	/* use SST byte programming */
+#define	SPI_NOR_NO_FR		0x08	/* Can't do fastread */
+#define	SECT_4K_PMC		0x10	/* SPINOR_OP_BE_4K_PMC works uniformly */
+#define	SPI_NOR_DUAL_READ	0x20    /* Flash supports Dual Read */
+#define	SPI_NOR_QUAD_READ	0x40    /* Flash supports Quad Read */
+};
+
+#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags)	\
+	((kernel_ulong_t)&(struct flash_info) {				\
+		.jedec_id = (_jedec_id),				\
+		.ext_id = (_ext_id),					\
+		.sector_size = (_sector_size),				\
+		.n_sectors = (_n_sectors),				\
+		.page_size = 256,					\
+		.flags = (_flags),					\
+	})
+
+#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width, _flags)	\
+	((kernel_ulong_t)&(struct flash_info) {				\
+		.sector_size = (_sector_size),				\
+		.n_sectors = (_n_sectors),				\
+		.page_size = (_page_size),				\
+		.addr_width = (_addr_width),				\
+		.flags = (_flags),					\
+	})
+
+/* NOTE: double check command sets and memory organization when you add
+ * more nor chips.  This current list focusses on newer chips, which
+ * have been converging on command sets which including JEDEC ID.
+ */
+const struct spi_device_id spi_nor_ids[] = {
+	/* Atmel -- some are (confusingly) marketed as "DataFlash" */
+	{ "at25fs010",  INFO(0x1f6601, 0, 32 * 1024,   4, SECT_4K) },
+	{ "at25fs040",  INFO(0x1f6604, 0, 64 * 1024,   8, SECT_4K) },
+
+	{ "at25df041a", INFO(0x1f4401, 0, 64 * 1024,   8, SECT_4K) },
+	{ "at25df321a", INFO(0x1f4701, 0, 64 * 1024,  64, SECT_4K) },
+	{ "at25df641",  INFO(0x1f4800, 0, 64 * 1024, 128, SECT_4K) },
+
+	{ "at26f004",   INFO(0x1f0400, 0, 64 * 1024,  8, SECT_4K) },
+	{ "at26df081a", INFO(0x1f4501, 0, 64 * 1024, 16, SECT_4K) },
+	{ "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32, SECT_4K) },
+	{ "at26df321",  INFO(0x1f4700, 0, 64 * 1024, 64, SECT_4K) },
+
+	{ "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16, SECT_4K) },
+
+	/* EON -- en25xxx */
+	{ "en25f32",    INFO(0x1c3116, 0, 64 * 1024,   64, SECT_4K) },
+	{ "en25p32",    INFO(0x1c2016, 0, 64 * 1024,   64, 0) },
+	{ "en25q32b",   INFO(0x1c3016, 0, 64 * 1024,   64, 0) },
+	{ "en25p64",    INFO(0x1c2017, 0, 64 * 1024,  128, 0) },
+	{ "en25q64",    INFO(0x1c3017, 0, 64 * 1024,  128, SECT_4K) },
+	{ "en25qh256",  INFO(0x1c7019, 0, 64 * 1024,  512, 0) },
+
+	/* ESMT */
+	{ "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, SECT_4K) },
+
+	/* Everspin */
+	{ "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+	{ "mr25h10",  CAT25_INFO(128 * 1024, 1, 256, 3, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+
+	/* GigaDevice */
+	{ "gd25q32", INFO(0xc84016, 0, 64 * 1024,  64, SECT_4K) },
+	{ "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128, SECT_4K) },
+
+	/* Intel/Numonyx -- xxxs33b */
+	{ "160s33b",  INFO(0x898911, 0, 64 * 1024,  32, 0) },
+	{ "320s33b",  INFO(0x898912, 0, 64 * 1024,  64, 0) },
+	{ "640s33b",  INFO(0x898913, 0, 64 * 1024, 128, 0) },
+
+	/* Macronix */
+	{ "mx25l2005a",  INFO(0xc22012, 0, 64 * 1024,   4, SECT_4K) },
+	{ "mx25l4005a",  INFO(0xc22013, 0, 64 * 1024,   8, SECT_4K) },
+	{ "mx25l8005",   INFO(0xc22014, 0, 64 * 1024,  16, 0) },
+	{ "mx25l1606e",  INFO(0xc22015, 0, 64 * 1024,  32, SECT_4K) },
+	{ "mx25l3205d",  INFO(0xc22016, 0, 64 * 1024,  64, 0) },
+	{ "mx25l3255e",  INFO(0xc29e16, 0, 64 * 1024,  64, SECT_4K) },
+	{ "mx25l6405d",  INFO(0xc22017, 0, 64 * 1024, 128, 0) },
+	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
+	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
+	{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) },
+	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
+	{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_QUAD_READ) },
+	{ "mx66l1g55g",  INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
+
+	/* Micron */
+	{ "n25q064",     INFO(0x20ba17, 0, 64 * 1024,  128, 0) },
+	{ "n25q128a11",  INFO(0x20bb18, 0, 64 * 1024,  256, 0) },
+	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256, 0) },
+	{ "n25q256a",    INFO(0x20ba19, 0, 64 * 1024,  512, SECT_4K) },
+	{ "n25q512a",    INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K) },
+
+	/* PMC */
+	{ "pm25lv512",   INFO(0,        0, 32 * 1024,    2, SECT_4K_PMC) },
+	{ "pm25lv010",   INFO(0,        0, 32 * 1024,    4, SECT_4K_PMC) },
+	{ "pm25lq032",   INFO(0x7f9d46, 0, 64 * 1024,   64, SECT_4K) },
+
+	/* Spansion -- single (large) sector size only, at least
+	 * for the chips listed here (without boot sectors).
+	 */
+	{ "s25sl032p",  INFO(0x010215, 0x4d00,  64 * 1024,  64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "s25sl064p",  INFO(0x010216, 0x4d00,  64 * 1024, 128, 0) },
+	{ "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, 0) },
+	{ "s25fl256s1", INFO(0x010219, 0x4d01,  64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "s25fl512s",  INFO(0x010220, 0x4d00, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "s70fl01gs",  INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) },
+	{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024,  64, 0) },
+	{ "s25sl12801", INFO(0x012018, 0x0301,  64 * 1024, 256, 0) },
+	{ "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024,  64, 0) },
+	{ "s25fl129p1", INFO(0x012018, 0x4d01,  64 * 1024, 256, 0) },
+	{ "s25sl004a",  INFO(0x010212,      0,  64 * 1024,   8, 0) },
+	{ "s25sl008a",  INFO(0x010213,      0,  64 * 1024,  16, 0) },
+	{ "s25sl016a",  INFO(0x010214,      0,  64 * 1024,  32, 0) },
+	{ "s25sl032a",  INFO(0x010215,      0,  64 * 1024,  64, 0) },
+	{ "s25sl064a",  INFO(0x010216,      0,  64 * 1024, 128, 0) },
+	{ "s25fl008k",  INFO(0xef4014,      0,  64 * 1024,  16, SECT_4K) },
+	{ "s25fl016k",  INFO(0xef4015,      0,  64 * 1024,  32, SECT_4K) },
+	{ "s25fl064k",  INFO(0xef4017,      0,  64 * 1024, 128, SECT_4K) },
+
+	/* SST -- large erase sizes are "overlays", "sectors" are 4K */
+	{ "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024,  8, SECT_4K | SST_WRITE) },
+	{ "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) },
+	{ "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32, SECT_4K | SST_WRITE) },
+	{ "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64, SECT_4K | SST_WRITE) },
+	{ "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128, SECT_4K) },
+	{ "sst25wf512",  INFO(0xbf2501, 0, 64 * 1024,  1, SECT_4K | SST_WRITE) },
+	{ "sst25wf010",  INFO(0xbf2502, 0, 64 * 1024,  2, SECT_4K | SST_WRITE) },
+	{ "sst25wf020",  INFO(0xbf2503, 0, 64 * 1024,  4, SECT_4K | SST_WRITE) },
+	{ "sst25wf040",  INFO(0xbf2504, 0, 64 * 1024,  8, SECT_4K | SST_WRITE) },
+
+	/* ST Microelectronics -- newer production may have feature updates */
+	{ "m25p05",  INFO(0x202010,  0,  32 * 1024,   2, 0) },
+	{ "m25p10",  INFO(0x202011,  0,  32 * 1024,   4, 0) },
+	{ "m25p20",  INFO(0x202012,  0,  64 * 1024,   4, 0) },
+	{ "m25p40",  INFO(0x202013,  0,  64 * 1024,   8, 0) },
+	{ "m25p80",  INFO(0x202014,  0,  64 * 1024,  16, 0) },
+	{ "m25p16",  INFO(0x202015,  0,  64 * 1024,  32, 0) },
+	{ "m25p32",  INFO(0x202016,  0,  64 * 1024,  64, 0) },
+	{ "m25p64",  INFO(0x202017,  0,  64 * 1024, 128, 0) },
+	{ "m25p128", INFO(0x202018,  0, 256 * 1024,  64, 0) },
+	{ "n25q032", INFO(0x20ba16,  0,  64 * 1024,  64, 0) },
+
+	{ "m25p05-nonjedec",  INFO(0, 0,  32 * 1024,   2, 0) },
+	{ "m25p10-nonjedec",  INFO(0, 0,  32 * 1024,   4, 0) },
+	{ "m25p20-nonjedec",  INFO(0, 0,  64 * 1024,   4, 0) },
+	{ "m25p40-nonjedec",  INFO(0, 0,  64 * 1024,   8, 0) },
+	{ "m25p80-nonjedec",  INFO(0, 0,  64 * 1024,  16, 0) },
+	{ "m25p16-nonjedec",  INFO(0, 0,  64 * 1024,  32, 0) },
+	{ "m25p32-nonjedec",  INFO(0, 0,  64 * 1024,  64, 0) },
+	{ "m25p64-nonjedec",  INFO(0, 0,  64 * 1024, 128, 0) },
+	{ "m25p128-nonjedec", INFO(0, 0, 256 * 1024,  64, 0) },
+
+	{ "m45pe10", INFO(0x204011,  0, 64 * 1024,    2, 0) },
+	{ "m45pe80", INFO(0x204014,  0, 64 * 1024,   16, 0) },
+	{ "m45pe16", INFO(0x204015,  0, 64 * 1024,   32, 0) },
+
+	{ "m25pe20", INFO(0x208012,  0, 64 * 1024,  4,       0) },
+	{ "m25pe80", INFO(0x208014,  0, 64 * 1024, 16,       0) },
+	{ "m25pe16", INFO(0x208015,  0, 64 * 1024, 32, SECT_4K) },
+
+	{ "m25px16",    INFO(0x207115,  0, 64 * 1024, 32, SECT_4K) },
+	{ "m25px32",    INFO(0x207116,  0, 64 * 1024, 64, SECT_4K) },
+	{ "m25px32-s0", INFO(0x207316,  0, 64 * 1024, 64, SECT_4K) },
+	{ "m25px32-s1", INFO(0x206316,  0, 64 * 1024, 64, SECT_4K) },
+	{ "m25px64",    INFO(0x207117,  0, 64 * 1024, 128, 0) },
+
+	/* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
+	{ "w25x10", INFO(0xef3011, 0, 64 * 1024,  2,  SECT_4K) },
+	{ "w25x20", INFO(0xef3012, 0, 64 * 1024,  4,  SECT_4K) },
+	{ "w25x40", INFO(0xef3013, 0, 64 * 1024,  8,  SECT_4K) },
+	{ "w25x80", INFO(0xef3014, 0, 64 * 1024,  16, SECT_4K) },
+	{ "w25x16", INFO(0xef3015, 0, 64 * 1024,  32, SECT_4K) },
+	{ "w25x32", INFO(0xef3016, 0, 64 * 1024,  64, SECT_4K) },
+	{ "w25q32", INFO(0xef4016, 0, 64 * 1024,  64, SECT_4K) },
+	{ "w25q32dw", INFO(0xef6016, 0, 64 * 1024,  64, SECT_4K) },
+	{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
+	{ "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
+	{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
+	{ "w25q80", INFO(0xef5014, 0, 64 * 1024,  16, SECT_4K) },
+	{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024,  16, SECT_4K) },
+	{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
+	{ "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K) },
+
+	/* Catalyst / On Semiconductor -- non-JEDEC */
+	{ "cat25c11", CAT25_INFO(  16, 8, 16, 1, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+	{ "cat25c03", CAT25_INFO(  32, 8, 16, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+	{ "cat25c09", CAT25_INFO( 128, 8, 32, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+	{ "cat25c17", CAT25_INFO( 256, 8, 32, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+	{ "cat25128", CAT25_INFO(2048, 8, 64, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+	{ },
+};
+EXPORT_SYMBOL_GPL(spi_nor_ids);
+
+static const struct spi_device_id *spi_nor_read_id(struct spi_nor *nor)
+{
+	int			tmp;
+	u8			id[5];
+	u32			jedec;
+	u16                     ext_jedec;
+	struct flash_info	*info;
+
+	tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, 5);
+	if (tmp < 0) {
+		dev_dbg(nor->dev, " error %d reading JEDEC ID\n", tmp);
+		return ERR_PTR(tmp);
+	}
+	jedec = id[0];
+	jedec = jedec << 8;
+	jedec |= id[1];
+	jedec = jedec << 8;
+	jedec |= id[2];
+
+	ext_jedec = id[3] << 8 | id[4];
+
+	for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) {
+		info = (void *)spi_nor_ids[tmp].driver_data;
+		if (info->jedec_id == jedec) {
+			if (info->ext_id == 0 || info->ext_id == ext_jedec)
+				return &spi_nor_ids[tmp];
+		}
+	}
+	dev_err(nor->dev, "unrecognized JEDEC id %06x\n", jedec);
+	return ERR_PTR(-ENODEV);
+}
+
+static const struct spi_device_id *jedec_probe(struct spi_nor *nor)
+{
+	return nor->read_id(nor);
+}
+
+static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len,
+			size_t *retlen, u_char *buf)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	int ret;
+
+	dev_dbg(nor->dev, "from 0x%08x, len %zd\n", (u32)from, len);
+
+	ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_READ);
+	if (ret)
+		return ret;
+
+	ret = nor->read(nor, from, len, retlen, buf);
+
+	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_READ);
+	return ret;
+}
+
+static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
+		size_t *retlen, const u_char *buf)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	size_t actual;
+	int ret;
+
+	dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len);
+
+	ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_WRITE);
+	if (ret)
+		return ret;
+
+	/* Wait until finished previous write command. */
+	ret = wait_till_ready(nor);
+	if (ret)
+		goto time_out;
+
+	write_enable(nor);
+
+	nor->sst_write_second = false;
+
+	actual = to % 2;
+	/* Start write from odd address. */
+	if (actual) {
+		nor->program_opcode = SPINOR_OP_BP;
+
+		/* write one byte. */
+		nor->write(nor, to, 1, retlen, buf);
+		ret = wait_till_ready(nor);
+		if (ret)
+			goto time_out;
+	}
+	to += actual;
+
+	/* Write out most of the data here. */
+	for (; actual < len - 1; actual += 2) {
+		nor->program_opcode = SPINOR_OP_AAI_WP;
+
+		/* write two bytes. */
+		nor->write(nor, to, 2, retlen, buf + actual);
+		ret = wait_till_ready(nor);
+		if (ret)
+			goto time_out;
+		to += 2;
+		nor->sst_write_second = true;
+	}
+	nor->sst_write_second = false;
+
+	write_disable(nor);
+	ret = wait_till_ready(nor);
+	if (ret)
+		goto time_out;
+
+	/* Write out trailing byte if it exists. */
+	if (actual != len) {
+		write_enable(nor);
+
+		nor->program_opcode = SPINOR_OP_BP;
+		nor->write(nor, to, 1, retlen, buf + actual);
+
+		ret = wait_till_ready(nor);
+		if (ret)
+			goto time_out;
+		write_disable(nor);
+	}
+time_out:
+	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE);
+	return ret;
+}
+
+/*
+ * Write an address range to the nor chip.  Data must be written in
+ * FLASH_PAGESIZE chunks.  The address range may be any size provided
+ * it is within the physical boundaries.
+ */
+static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
+	size_t *retlen, const u_char *buf)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	u32 page_offset, page_size, i;
+	int ret;
+
+	dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len);
+
+	ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_WRITE);
+	if (ret)
+		return ret;
+
+	/* Wait until finished previous write command. */
+	ret = wait_till_ready(nor);
+	if (ret)
+		goto write_err;
+
+	write_enable(nor);
+
+	page_offset = to & (nor->page_size - 1);
+
+	/* do all the bytes fit onto one page? */
+	if (page_offset + len <= nor->page_size) {
+		nor->write(nor, to, len, retlen, buf);
+	} else {
+		/* the size of data remaining on the first page */
+		page_size = nor->page_size - page_offset;
+		nor->write(nor, to, page_size, retlen, buf);
+
+		/* write everything in nor->page_size chunks */
+		for (i = page_size; i < len; i += page_size) {
+			page_size = len - i;
+			if (page_size > nor->page_size)
+				page_size = nor->page_size;
+
+			wait_till_ready(nor);
+			write_enable(nor);
+
+			nor->write(nor, to + i, page_size, retlen, buf + i);
+		}
+	}
+
+write_err:
+	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE);
+	return 0;
+}
+
+static int macronix_quad_enable(struct spi_nor *nor)
+{
+	int ret, val;
+
+	val = read_sr(nor);
+	write_enable(nor);
+
+	nor->cmd_buf[0] = val | SR_QUAD_EN_MX;
+	nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 1, 0);
+
+	if (wait_till_ready(nor))
+		return 1;
+
+	ret = read_sr(nor);
+	if (!(ret > 0 && (ret & SR_QUAD_EN_MX))) {
+		dev_err(nor->dev, "Macronix Quad bit not set\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * Write status Register and configuration register with 2 bytes
+ * The first byte will be written to the status register, while the
+ * second byte will be written to the configuration register.
+ * Return negative if error occured.
+ */
+static int write_sr_cr(struct spi_nor *nor, u16 val)
+{
+	nor->cmd_buf[0] = val & 0xff;
+	nor->cmd_buf[1] = (val >> 8);
+
+	return nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 2, 0);
+}
+
+static int spansion_quad_enable(struct spi_nor *nor)
+{
+	int ret;
+	int quad_en = CR_QUAD_EN_SPAN << 8;
+
+	write_enable(nor);
+
+	ret = write_sr_cr(nor, quad_en);
+	if (ret < 0) {
+		dev_err(nor->dev,
+			"error while writing configuration register\n");
+		return -EINVAL;
+	}
+
+	/* read back and check it */
+	ret = read_cr(nor);
+	if (!(ret > 0 && (ret & CR_QUAD_EN_SPAN))) {
+		dev_err(nor->dev, "Spansion Quad bit not set\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int set_quad_mode(struct spi_nor *nor, u32 jedec_id)
+{
+	int status;
+
+	switch (JEDEC_MFR(jedec_id)) {
+	case CFI_MFR_MACRONIX:
+		status = macronix_quad_enable(nor);
+		if (status) {
+			dev_err(nor->dev, "Macronix quad-read not enabled\n");
+			return -EINVAL;
+		}
+		return status;
+	default:
+		status = spansion_quad_enable(nor);
+		if (status) {
+			dev_err(nor->dev, "Spansion quad-read not enabled\n");
+			return -EINVAL;
+		}
+		return status;
+	}
+}
+
+static int spi_nor_check(struct spi_nor *nor)
+{
+	if (!nor->dev || !nor->read || !nor->write ||
+		!nor->read_reg || !nor->write_reg || !nor->erase) {
+		pr_err("spi-nor: please fill all the necessary fields!\n");
+		return -EINVAL;
+	}
+
+	if (!nor->read_id)
+		nor->read_id = spi_nor_read_id;
+	if (!nor->wait_till_ready)
+		nor->wait_till_ready = spi_nor_wait_till_ready;
+
+	return 0;
+}
+
+int spi_nor_scan(struct spi_nor *nor, const struct spi_device_id *id,
+			enum read_mode mode)
+{
+	struct flash_info		*info;
+	struct flash_platform_data	*data;
+	struct device *dev = nor->dev;
+	struct mtd_info *mtd = nor->mtd;
+	struct device_node *np = dev->of_node;
+	int ret;
+	int i;
+
+	ret = spi_nor_check(nor);
+	if (ret)
+		return ret;
+
+	/* Platform data helps sort out which chip type we have, as
+	 * well as how this board partitions it.  If we don't have
+	 * a chip ID, try the JEDEC id commands; they'll work for most
+	 * newer chips, even if we don't recognize the particular chip.
+	 */
+	data = dev_get_platdata(dev);
+	if (data && data->type) {
+		const struct spi_device_id *plat_id;
+
+		for (i = 0; i < ARRAY_SIZE(spi_nor_ids) - 1; i++) {
+			plat_id = &spi_nor_ids[i];
+			if (strcmp(data->type, plat_id->name))
+				continue;
+			break;
+		}
+
+		if (i < ARRAY_SIZE(spi_nor_ids) - 1)
+			id = plat_id;
+		else
+			dev_warn(dev, "unrecognized id %s\n", data->type);
+	}
+
+	info = (void *)id->driver_data;
+
+	if (info->jedec_id) {
+		const struct spi_device_id *jid;
+
+		jid = jedec_probe(nor);
+		if (IS_ERR(jid)) {
+			return PTR_ERR(jid);
+		} else if (jid != id) {
+			/*
+			 * JEDEC knows better, so overwrite platform ID. We
+			 * can't trust partitions any longer, but we'll let
+			 * mtd apply them anyway, since some partitions may be
+			 * marked read-only, and we don't want to lose that
+			 * information, even if it's not 100% accurate.
+			 */
+			dev_warn(dev, "found %s, expected %s\n",
+				 jid->name, id->name);
+			id = jid;
+			info = (void *)jid->driver_data;
+		}
+	}
+
+	mutex_init(&nor->lock);
+
+	/*
+	 * Atmel, SST and Intel/Numonyx serial nor tend to power
+	 * up with the software protection bits set
+	 */
+
+	if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ATMEL ||
+	    JEDEC_MFR(info->jedec_id) == CFI_MFR_INTEL ||
+	    JEDEC_MFR(info->jedec_id) == CFI_MFR_SST) {
+		write_enable(nor);
+		write_sr(nor, 0);
+	}
+
+	if (data && data->name)
+		mtd->name = data->name;
+	else
+		mtd->name = dev_name(dev);
+
+	mtd->type = MTD_NORFLASH;
+	mtd->writesize = 1;
+	mtd->flags = MTD_CAP_NORFLASH;
+	mtd->size = info->sector_size * info->n_sectors;
+	mtd->_erase = spi_nor_erase;
+	mtd->_read = spi_nor_read;
+
+	/* nor protection support for STmicro chips */
+	if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ST) {
+		mtd->_lock = spi_nor_lock;
+		mtd->_unlock = spi_nor_unlock;
+	}
+
+	/* sst nor chips use AAI word program */
+	if (info->flags & SST_WRITE)
+		mtd->_write = sst_write;
+	else
+		mtd->_write = spi_nor_write;
+
+	/* prefer "small sector" erase if possible */
+	if (info->flags & SECT_4K) {
+		nor->erase_opcode = SPINOR_OP_BE_4K;
+		mtd->erasesize = 4096;
+	} else if (info->flags & SECT_4K_PMC) {
+		nor->erase_opcode = SPINOR_OP_BE_4K_PMC;
+		mtd->erasesize = 4096;
+	} else {
+		nor->erase_opcode = SPINOR_OP_SE;
+		mtd->erasesize = info->sector_size;
+	}
+
+	if (info->flags & SPI_NOR_NO_ERASE)
+		mtd->flags |= MTD_NO_ERASE;
+
+	mtd->dev.parent = dev;
+	nor->page_size = info->page_size;
+	mtd->writebufsize = nor->page_size;
+
+	if (np) {
+		/* If we were instantiated by DT, use it */
+		if (of_property_read_bool(np, "m25p,fast-read"))
+			nor->flash_read = SPI_NOR_FAST;
+		else
+			nor->flash_read = SPI_NOR_NORMAL;
+	} else {
+		/* If we weren't instantiated by DT, default to fast-read */
+		nor->flash_read = SPI_NOR_FAST;
+	}
+
+	/* Some devices cannot do fast-read, no matter what DT tells us */
+	if (info->flags & SPI_NOR_NO_FR)
+		nor->flash_read = SPI_NOR_NORMAL;
+
+	/* Quad/Dual-read mode takes precedence over fast/normal */
+	if (mode == SPI_NOR_QUAD && info->flags & SPI_NOR_QUAD_READ) {
+		ret = set_quad_mode(nor, info->jedec_id);
+		if (ret) {
+			dev_err(dev, "quad mode not supported\n");
+			return ret;
+		}
+		nor->flash_read = SPI_NOR_QUAD;
+	} else if (mode == SPI_NOR_DUAL && info->flags & SPI_NOR_DUAL_READ) {
+		nor->flash_read = SPI_NOR_DUAL;
+	}
+
+	/* Default commands */
+	switch (nor->flash_read) {
+	case SPI_NOR_QUAD:
+		nor->read_opcode = SPINOR_OP_READ_1_1_4;
+		break;
+	case SPI_NOR_DUAL:
+		nor->read_opcode = SPINOR_OP_READ_1_1_2;
+		break;
+	case SPI_NOR_FAST:
+		nor->read_opcode = SPINOR_OP_READ_FAST;
+		break;
+	case SPI_NOR_NORMAL:
+		nor->read_opcode = SPINOR_OP_READ;
+		break;
+	default:
+		dev_err(dev, "No Read opcode defined\n");
+		return -EINVAL;
+	}
+
+	nor->program_opcode = SPINOR_OP_PP;
+
+	if (info->addr_width)
+		nor->addr_width = info->addr_width;
+	else if (mtd->size > 0x1000000) {
+		/* enable 4-byte addressing if the device exceeds 16MiB */
+		nor->addr_width = 4;
+		if (JEDEC_MFR(info->jedec_id) == CFI_MFR_AMD) {
+			/* Dedicated 4-byte command set */
+			switch (nor->flash_read) {
+			case SPI_NOR_QUAD:
+				nor->read_opcode = SPINOR_OP_READ4_1_1_4;
+				break;
+			case SPI_NOR_DUAL:
+				nor->read_opcode = SPINOR_OP_READ4_1_1_2;
+				break;
+			case SPI_NOR_FAST:
+				nor->read_opcode = SPINOR_OP_READ4_FAST;
+				break;
+			case SPI_NOR_NORMAL:
+				nor->read_opcode = SPINOR_OP_READ4;
+				break;
+			}
+			nor->program_opcode = SPINOR_OP_PP_4B;
+			/* No small sector erase for 4-byte command set */
+			nor->erase_opcode = SPINOR_OP_SE_4B;
+			mtd->erasesize = info->sector_size;
+		} else
+			set_4byte(nor, info->jedec_id, 1);
+	} else {
+		nor->addr_width = 3;
+	}
+
+	nor->read_dummy = spi_nor_read_dummy_cycles(nor);
+
+	dev_info(dev, "%s (%lld Kbytes)\n", id->name,
+			(long long)mtd->size >> 10);
+
+	dev_dbg(dev,
+		"mtd .name = %s, .size = 0x%llx (%lldMiB), "
+		".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
+		mtd->name, (long long)mtd->size, (long long)(mtd->size >> 20),
+		mtd->erasesize, mtd->erasesize / 1024, mtd->numeraseregions);
+
+	if (mtd->numeraseregions)
+		for (i = 0; i < mtd->numeraseregions; i++)
+			dev_dbg(dev,
+				"mtd.eraseregions[%d] = { .offset = 0x%llx, "
+				".erasesize = 0x%.8x (%uKiB), "
+				".numblocks = %d }\n",
+				i, (long long)mtd->eraseregions[i].offset,
+				mtd->eraseregions[i].erasesize,
+				mtd->eraseregions[i].erasesize / 1024,
+				mtd->eraseregions[i].numblocks);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(spi_nor_scan);
+
+const struct spi_device_id *spi_nor_match_id(char *name)
+{
+	const struct spi_device_id *id = spi_nor_ids;
+
+	while (id->name[0]) {
+		if (!strcmp(name, id->name))
+			return id;
+		id++;
+	}
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(spi_nor_match_id);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Huang Shijie <shijie8@gmail.com>");
+MODULE_AUTHOR("Mike Lavender");
+MODULE_DESCRIPTION("framework for SPI NOR");
diff --git a/drivers/mtd/ssfdc.c b/drivers/mtd/ssfdc.c
index 81c4ecdc11f..daf82ba7aba 100644
--- a/drivers/mtd/ssfdc.c
+++ b/drivers/mtd/ssfdc.c
@@ -1,6 +1,6 @@
 /*
  * Linux driver for SSFDC Flash Translation Layer (Read only)
- * (c) 2005 Eptar srl
+ * © 2005 Eptar srl
  * Author: Claudio Lanconelli <lanconelli.claudio@eptar.com>
  *
  * Based on NTFL and MTDBLOCK_RO drivers
@@ -122,9 +122,9 @@ static int get_valid_cis_sector(struct mtd_info *mtd)
 	 * is not SSFDC formatted
 	 */
 	for (k = 0, offset = 0; k < 4; k++, offset += mtd->erasesize) {
-		if (!mtd->block_isbad(mtd, offset)) {
-			ret = mtd->read(mtd, offset, SECTOR_SIZE, &retlen,
-				sect_buf);
+		if (mtd_block_isbad(mtd, offset)) {
+			ret = mtd_read(mtd, offset, SECTOR_SIZE, &retlen,
+				       sect_buf);
 
 			/* CIS pattern match on the sector buffer */
 			if (ret < 0 || retlen != SECTOR_SIZE) {
@@ -135,8 +135,7 @@ static int get_valid_cis_sector(struct mtd_info *mtd)
 				/* Found */
 				cis_sector = (int)(offset >> SECTOR_SHIFT);
 			} else {
-				DEBUG(MTD_DEBUG_LEVEL1,
-					"SSFDC_RO: CIS/IDI sector not found"
+				pr_debug("SSFDC_RO: CIS/IDI sector not found"
 					" on %s (mtd%d)\n", mtd->name,
 					mtd->index);
 			}
@@ -157,7 +156,7 @@ static int read_physical_sector(struct mtd_info *mtd, uint8_t *sect_buf,
 	size_t retlen;
 	loff_t offset = (loff_t)sect_no << SECTOR_SHIFT;
 
-	ret = mtd->read(mtd, offset, SECTOR_SIZE, &retlen, sect_buf);
+	ret = mtd_read(mtd, offset, SECTOR_SIZE, &retlen, sect_buf);
 	if (ret < 0 || retlen != SECTOR_SIZE)
 		return -1;
 
@@ -170,13 +169,13 @@ static int read_raw_oob(struct mtd_info *mtd, loff_t offs, uint8_t *buf)
 	struct mtd_oob_ops ops;
 	int ret;
 
-	ops.mode = MTD_OOB_RAW;
+	ops.mode = MTD_OPS_RAW;
 	ops.ooboffs = 0;
 	ops.ooblen = OOB_SIZE;
 	ops.oobbuf = buf;
 	ops.datbuf = NULL;
 
-	ret = mtd->read_oob(mtd, offs, &ops);
+	ret = mtd_read_oob(mtd, offs, &ops);
 	if (ret < 0 || ops.oobretlen != OOB_SIZE)
 		return -1;
 
@@ -221,8 +220,7 @@ static int get_logical_address(uint8_t *oob_buf)
 			block_address >>= 1;
 
 			if (get_parity(block_address, 10) != parity) {
-				DEBUG(MTD_DEBUG_LEVEL0,
-					"SSFDC_RO: logical address field%d"
+				pr_debug("SSFDC_RO: logical address field%d"
 					"parity error(0x%04X)\n", j+1,
 					block_address);
 			} else {
@@ -235,7 +233,7 @@ static int get_logical_address(uint8_t *oob_buf)
 	if (!ok)
 		block_address = -2;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "SSFDC_RO: get_logical_address() %d\n",
+	pr_debug("SSFDC_RO: get_logical_address() %d\n",
 		block_address);
 
 	return block_address;
@@ -249,7 +247,7 @@ static int build_logical_block_map(struct ssfdcr_record *ssfdc)
 	int ret, block_address, phys_block;
 	struct mtd_info *mtd = ssfdc->mbd.mtd;
 
-	DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: build_block_map() nblks=%d (%luK)\n",
+	pr_debug("SSFDC_RO: build_block_map() nblks=%d (%luK)\n",
 	      ssfdc->map_len,
 	      (unsigned long)ssfdc->map_len * ssfdc->erase_size / 1024);
 
@@ -257,13 +255,12 @@ static int build_logical_block_map(struct ssfdcr_record *ssfdc)
 	for (phys_block = ssfdc->cis_block + 1; phys_block < ssfdc->map_len;
 			phys_block++) {
 		offset = (unsigned long)phys_block * ssfdc->erase_size;
-		if (mtd->block_isbad(mtd, offset))
+		if (mtd_block_isbad(mtd, offset))
 			continue;	/* skip bad blocks */
 
 		ret = read_raw_oob(mtd, offset, oob_buf);
 		if (ret < 0) {
-			DEBUG(MTD_DEBUG_LEVEL0,
-				"SSFDC_RO: mtd read_oob() failed at %lu\n",
+			pr_debug("SSFDC_RO: mtd read_oob() failed at %lu\n",
 				offset);
 			return -1;
 		}
@@ -279,8 +276,7 @@ static int build_logical_block_map(struct ssfdcr_record *ssfdc)
 			ssfdc->logic_block_map[block_address] =
 				(unsigned short)phys_block;
 
-			DEBUG(MTD_DEBUG_LEVEL2,
-				"SSFDC_RO: build_block_map() phys_block=%d,"
+			pr_debug("SSFDC_RO: build_block_map() phys_block=%d,"
 				"logic_block_addr=%d, zone=%d\n",
 				phys_block, block_address, zone_index);
 		}
@@ -294,7 +290,7 @@ static void ssfdcr_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
 	int cis_sector;
 
 	/* Check for small page NAND flash */
-	if (mtd->type != MTD_NANDFLASH || mtd->oobsize != OOB_SIZE ||
+	if (!mtd_type_is_nand(mtd) || mtd->oobsize != OOB_SIZE ||
 	    mtd->size > UINT_MAX)
 		return;
 
@@ -304,11 +300,8 @@ static void ssfdcr_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
 		return;
 
 	ssfdc = kzalloc(sizeof(struct ssfdcr_record), GFP_KERNEL);
-	if (!ssfdc) {
-		printk(KERN_WARNING
-			"SSFDC_RO: out of memory for data structures\n");
+	if (!ssfdc)
 		return;
-	}
 
 	ssfdc->mbd.mtd = mtd;
 	ssfdc->mbd.devnum = -1;
@@ -319,8 +312,7 @@ static void ssfdcr_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
 	ssfdc->erase_size = mtd->erasesize;
 	ssfdc->map_len = (u32)mtd->size / mtd->erasesize;
 
-	DEBUG(MTD_DEBUG_LEVEL1,
-		"SSFDC_RO: cis_block=%d,erase_size=%d,map_len=%d,n_zones=%d\n",
+	pr_debug("SSFDC_RO: cis_block=%d,erase_size=%d,map_len=%d,n_zones=%d\n",
 		ssfdc->cis_block, ssfdc->erase_size, ssfdc->map_len,
 		DIV_ROUND_UP(ssfdc->map_len, MAX_PHYS_BLK_PER_ZONE));
 
@@ -331,7 +323,7 @@ static void ssfdcr_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
 	ssfdc->cylinders = (unsigned short)(((u32)mtd->size >> SECTOR_SHIFT) /
 			((long)ssfdc->sectors * (long)ssfdc->heads));
 
-	DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: using C:%d H:%d S:%d == %ld sects\n",
+	pr_debug("SSFDC_RO: using C:%d H:%d S:%d == %ld sects\n",
 		ssfdc->cylinders, ssfdc->heads , ssfdc->sectors,
 		(long)ssfdc->cylinders * (long)ssfdc->heads *
 		(long)ssfdc->sectors);
@@ -342,11 +334,8 @@ static void ssfdcr_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
 	/* Allocate logical block map */
 	ssfdc->logic_block_map = kmalloc(sizeof(ssfdc->logic_block_map[0]) *
 					 ssfdc->map_len, GFP_KERNEL);
-	if (!ssfdc->logic_block_map) {
-		printk(KERN_WARNING
-			"SSFDC_RO: out of memory for data structures\n");
+	if (!ssfdc->logic_block_map)
 		goto out_err;
-	}
 	memset(ssfdc->logic_block_map, 0xff, sizeof(ssfdc->logic_block_map[0]) *
 		ssfdc->map_len);
 
@@ -371,7 +360,7 @@ static void ssfdcr_remove_dev(struct mtd_blktrans_dev *dev)
 {
 	struct ssfdcr_record *ssfdc = (struct ssfdcr_record *)dev;
 
-	DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: remove_dev (i=%d)\n", dev->devnum);
+	pr_debug("SSFDC_RO: remove_dev (i=%d)\n", dev->devnum);
 
 	del_mtd_blktrans_dev(dev);
 	kfree(ssfdc->logic_block_map);
@@ -387,8 +376,7 @@ static int ssfdcr_readsect(struct mtd_blktrans_dev *dev,
 	offset = (int)(logic_sect_no % sectors_per_block);
 	block_address = (int)(logic_sect_no / sectors_per_block);
 
-	DEBUG(MTD_DEBUG_LEVEL3,
-		"SSFDC_RO: ssfdcr_readsect(%lu) sec_per_blk=%d, ofst=%d,"
+	pr_debug("SSFDC_RO: ssfdcr_readsect(%lu) sec_per_blk=%d, ofst=%d,"
 		" block_addr=%d\n", logic_sect_no, sectors_per_block, offset,
 		block_address);
 
@@ -397,8 +385,7 @@ static int ssfdcr_readsect(struct mtd_blktrans_dev *dev,
 
 	block_address = ssfdc->logic_block_map[block_address];
 
-	DEBUG(MTD_DEBUG_LEVEL3,
-		"SSFDC_RO: ssfdcr_readsect() phys_block_addr=%d\n",
+	pr_debug("SSFDC_RO: ssfdcr_readsect() phys_block_addr=%d\n",
 		block_address);
 
 	if (block_address < 0xffff) {
@@ -407,8 +394,7 @@ static int ssfdcr_readsect(struct mtd_blktrans_dev *dev,
 		sect_no = (unsigned long)block_address * sectors_per_block +
 				offset;
 
-		DEBUG(MTD_DEBUG_LEVEL3,
-			"SSFDC_RO: ssfdcr_readsect() phys_sect_no=%lu\n",
+		pr_debug("SSFDC_RO: ssfdcr_readsect() phys_sect_no=%lu\n",
 			sect_no);
 
 		if (read_physical_sector(ssfdc->mbd.mtd, buf, sect_no) < 0)
@@ -424,7 +410,7 @@ static int ssfdcr_getgeo(struct mtd_blktrans_dev *dev,  struct hd_geometry *geo)
 {
 	struct ssfdcr_record *ssfdc = (struct ssfdcr_record *)dev;
 
-	DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: ssfdcr_getgeo() C=%d, H=%d, S=%d\n",
+	pr_debug("SSFDC_RO: ssfdcr_getgeo() C=%d, H=%d, S=%d\n",
 			ssfdc->cylinders, ssfdc->heads, ssfdc->sectors);
 
 	geo->heads = ssfdc->heads;
diff --git a/drivers/mtd/tests/Makefile b/drivers/mtd/tests/Makefile
index b44dcab940d..937a829bb70 100644
--- a/drivers/mtd/tests/Makefile
+++ b/drivers/mtd/tests/Makefile
@@ -6,3 +6,13 @@ obj-$(CONFIG_MTD_TESTS) += mtd_stresstest.o
 obj-$(CONFIG_MTD_TESTS) += mtd_subpagetest.o
 obj-$(CONFIG_MTD_TESTS) += mtd_torturetest.o
 obj-$(CONFIG_MTD_TESTS) += mtd_nandecctest.o
+obj-$(CONFIG_MTD_TESTS) += mtd_nandbiterrs.o
+
+mtd_oobtest-objs := oobtest.o mtd_test.o
+mtd_pagetest-objs := pagetest.o mtd_test.o
+mtd_readtest-objs := readtest.o mtd_test.o
+mtd_speedtest-objs := speedtest.o mtd_test.o
+mtd_stresstest-objs := stresstest.o mtd_test.o
+mtd_subpagetest-objs := subpagetest.o mtd_test.o
+mtd_torturetest-objs := torturetest.o mtd_test.o
+mtd_nandbiterrs-objs := nandbiterrs.o mtd_test.o
diff --git a/drivers/mtd/tests/mtd_nandecctest.c b/drivers/mtd/tests/mtd_nandecctest.c
index 70d6d7d0d65..e579f9027c4 100644
--- a/drivers/mtd/tests/mtd_nandecctest.c
+++ b/drivers/mtd/tests/mtd_nandecctest.c
@@ -1,63 +1,292 @@
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/list.h>
 #include <linux/random.h>
 #include <linux/string.h>
 #include <linux/bitops.h>
-#include <linux/jiffies.h>
+#include <linux/slab.h>
 #include <linux/mtd/nand_ecc.h>
 
-#if defined(CONFIG_MTD_NAND) || defined(CONFIG_MTD_NAND_MODULE)
+/*
+ * Test the implementation for software ECC
+ *
+ * No actual MTD device is needed, So we don't need to warry about losing
+ * important data by human error.
+ *
+ * This covers possible patterns of corruption which can be reliably corrected
+ * or detected.
+ */
+
+#if IS_ENABLED(CONFIG_MTD_NAND)
+
+struct nand_ecc_test {
+	const char *name;
+	void (*prepare)(void *, void *, void *, void *, const size_t);
+	int (*verify)(void *, void *, void *, const size_t);
+};
 
-static void inject_single_bit_error(void *data, size_t size)
+/*
+ * The reason for this __change_bit_le() instead of __change_bit() is to inject
+ * bit error properly within the region which is not a multiple of
+ * sizeof(unsigned long) on big-endian systems
+ */
+#ifdef __LITTLE_ENDIAN
+#define __change_bit_le(nr, addr) __change_bit(nr, addr)
+#elif defined(__BIG_ENDIAN)
+#define __change_bit_le(nr, addr) \
+		__change_bit((nr) ^ ((BITS_PER_LONG - 1) & ~0x7), addr)
+#else
+#error "Unknown byte order"
+#endif
+
+static void single_bit_error_data(void *error_data, void *correct_data,
+				size_t size)
 {
-	unsigned long offset = random32() % (size * BITS_PER_BYTE);
+	unsigned int offset = prandom_u32() % (size * BITS_PER_BYTE);
 
-	__change_bit(offset, data);
+	memcpy(error_data, correct_data, size);
+	__change_bit_le(offset, error_data);
 }
 
-static unsigned char data[512];
-static unsigned char error_data[512];
+static void double_bit_error_data(void *error_data, void *correct_data,
+				size_t size)
+{
+	unsigned int offset[2];
+
+	offset[0] = prandom_u32() % (size * BITS_PER_BYTE);
+	do {
+		offset[1] = prandom_u32() % (size * BITS_PER_BYTE);
+	} while (offset[0] == offset[1]);
+
+	memcpy(error_data, correct_data, size);
 
-static int nand_ecc_test(const size_t size)
+	__change_bit_le(offset[0], error_data);
+	__change_bit_le(offset[1], error_data);
+}
+
+static unsigned int random_ecc_bit(size_t size)
 {
-	unsigned char code[3];
-	unsigned char error_code[3];
-	char testname[30];
+	unsigned int offset = prandom_u32() % (3 * BITS_PER_BYTE);
+
+	if (size == 256) {
+		/*
+		 * Don't inject a bit error into the insignificant bits (16th
+		 * and 17th bit) in ECC code for 256 byte data block
+		 */
+		while (offset == 16 || offset == 17)
+			offset = prandom_u32() % (3 * BITS_PER_BYTE);
+	}
 
-	BUG_ON(sizeof(data) < size);
+	return offset;
+}
 
-	sprintf(testname, "nand-ecc-%zu", size);
+static void single_bit_error_ecc(void *error_ecc, void *correct_ecc,
+				size_t size)
+{
+	unsigned int offset = random_ecc_bit(size);
 
-	get_random_bytes(data, size);
+	memcpy(error_ecc, correct_ecc, 3);
+	__change_bit_le(offset, error_ecc);
+}
 
-	memcpy(error_data, data, size);
-	inject_single_bit_error(error_data, size);
+static void double_bit_error_ecc(void *error_ecc, void *correct_ecc,
+				size_t size)
+{
+	unsigned int offset[2];
 
-	__nand_calculate_ecc(data, size, code);
-	__nand_calculate_ecc(error_data, size, error_code);
-	__nand_correct_data(error_data, code, error_code, size);
+	offset[0] = random_ecc_bit(size);
+	do {
+		offset[1] = random_ecc_bit(size);
+	} while (offset[0] == offset[1]);
 
-	if (!memcmp(data, error_data, size)) {
-		printk(KERN_INFO "mtd_nandecctest: ok - %s\n", testname);
+	memcpy(error_ecc, correct_ecc, 3);
+	__change_bit_le(offset[0], error_ecc);
+	__change_bit_le(offset[1], error_ecc);
+}
+
+static void no_bit_error(void *error_data, void *error_ecc,
+		void *correct_data, void *correct_ecc, const size_t size)
+{
+	memcpy(error_data, correct_data, size);
+	memcpy(error_ecc, correct_ecc, 3);
+}
+
+static int no_bit_error_verify(void *error_data, void *error_ecc,
+				void *correct_data, const size_t size)
+{
+	unsigned char calc_ecc[3];
+	int ret;
+
+	__nand_calculate_ecc(error_data, size, calc_ecc);
+	ret = __nand_correct_data(error_data, error_ecc, calc_ecc, size);
+	if (ret == 0 && !memcmp(correct_data, error_data, size))
 		return 0;
-	}
 
-	printk(KERN_ERR "mtd_nandecctest: not ok - %s\n", testname);
+	return -EINVAL;
+}
+
+static void single_bit_error_in_data(void *error_data, void *error_ecc,
+		void *correct_data, void *correct_ecc, const size_t size)
+{
+	single_bit_error_data(error_data, correct_data, size);
+	memcpy(error_ecc, correct_ecc, 3);
+}
+
+static void single_bit_error_in_ecc(void *error_data, void *error_ecc,
+		void *correct_data, void *correct_ecc, const size_t size)
+{
+	memcpy(error_data, correct_data, size);
+	single_bit_error_ecc(error_ecc, correct_ecc, size);
+}
+
+static int single_bit_error_correct(void *error_data, void *error_ecc,
+				void *correct_data, const size_t size)
+{
+	unsigned char calc_ecc[3];
+	int ret;
+
+	__nand_calculate_ecc(error_data, size, calc_ecc);
+	ret = __nand_correct_data(error_data, error_ecc, calc_ecc, size);
+	if (ret == 1 && !memcmp(correct_data, error_data, size))
+		return 0;
+
+	return -EINVAL;
+}
+
+static void double_bit_error_in_data(void *error_data, void *error_ecc,
+		void *correct_data, void *correct_ecc, const size_t size)
+{
+	double_bit_error_data(error_data, correct_data, size);
+	memcpy(error_ecc, correct_ecc, 3);
+}
+
+static void single_bit_error_in_data_and_ecc(void *error_data, void *error_ecc,
+		void *correct_data, void *correct_ecc, const size_t size)
+{
+	single_bit_error_data(error_data, correct_data, size);
+	single_bit_error_ecc(error_ecc, correct_ecc, size);
+}
+
+static void double_bit_error_in_ecc(void *error_data, void *error_ecc,
+		void *correct_data, void *correct_ecc, const size_t size)
+{
+	memcpy(error_data, correct_data, size);
+	double_bit_error_ecc(error_ecc, correct_ecc, size);
+}
+
+static int double_bit_error_detect(void *error_data, void *error_ecc,
+				void *correct_data, const size_t size)
+{
+	unsigned char calc_ecc[3];
+	int ret;
+
+	__nand_calculate_ecc(error_data, size, calc_ecc);
+	ret = __nand_correct_data(error_data, error_ecc, calc_ecc, size);
 
-	printk(KERN_DEBUG "hexdump of data:\n");
-	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 4,
-			data, size, false);
-	printk(KERN_DEBUG "hexdump of error data:\n");
-	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 4,
+	return (ret == -1) ? 0 : -EINVAL;
+}
+
+static const struct nand_ecc_test nand_ecc_test[] = {
+	{
+		.name = "no-bit-error",
+		.prepare = no_bit_error,
+		.verify = no_bit_error_verify,
+	},
+	{
+		.name = "single-bit-error-in-data-correct",
+		.prepare = single_bit_error_in_data,
+		.verify = single_bit_error_correct,
+	},
+	{
+		.name = "single-bit-error-in-ecc-correct",
+		.prepare = single_bit_error_in_ecc,
+		.verify = single_bit_error_correct,
+	},
+	{
+		.name = "double-bit-error-in-data-detect",
+		.prepare = double_bit_error_in_data,
+		.verify = double_bit_error_detect,
+	},
+	{
+		.name = "single-bit-error-in-data-and-ecc-detect",
+		.prepare = single_bit_error_in_data_and_ecc,
+		.verify = double_bit_error_detect,
+	},
+	{
+		.name = "double-bit-error-in-ecc-detect",
+		.prepare = double_bit_error_in_ecc,
+		.verify = double_bit_error_detect,
+	},
+};
+
+static void dump_data_ecc(void *error_data, void *error_ecc, void *correct_data,
+			void *correct_ecc, const size_t size)
+{
+	pr_info("hexdump of error data:\n");
+	print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 4,
 			error_data, size, false);
+	print_hex_dump(KERN_INFO, "hexdump of error ecc: ",
+			DUMP_PREFIX_NONE, 16, 1, error_ecc, 3, false);
+
+	pr_info("hexdump of correct data:\n");
+	print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 4,
+			correct_data, size, false);
+	print_hex_dump(KERN_INFO, "hexdump of correct ecc: ",
+			DUMP_PREFIX_NONE, 16, 1, correct_ecc, 3, false);
+}
+
+static int nand_ecc_test_run(const size_t size)
+{
+	int i;
+	int err = 0;
+	void *error_data;
+	void *error_ecc;
+	void *correct_data;
+	void *correct_ecc;
 
-	return -1;
+	error_data = kmalloc(size, GFP_KERNEL);
+	error_ecc = kmalloc(3, GFP_KERNEL);
+	correct_data = kmalloc(size, GFP_KERNEL);
+	correct_ecc = kmalloc(3, GFP_KERNEL);
+
+	if (!error_data || !error_ecc || !correct_data || !correct_ecc) {
+		err = -ENOMEM;
+		goto error;
+	}
+
+	prandom_bytes(correct_data, size);
+	__nand_calculate_ecc(correct_data, size, correct_ecc);
+
+	for (i = 0; i < ARRAY_SIZE(nand_ecc_test); i++) {
+		nand_ecc_test[i].prepare(error_data, error_ecc,
+				correct_data, correct_ecc, size);
+		err = nand_ecc_test[i].verify(error_data, error_ecc,
+						correct_data, size);
+
+		if (err) {
+			pr_err("not ok - %s-%zd\n",
+				nand_ecc_test[i].name, size);
+			dump_data_ecc(error_data, error_ecc,
+				correct_data, correct_ecc, size);
+			break;
+		}
+		pr_info("ok - %s-%zd\n",
+			nand_ecc_test[i].name, size);
+	}
+error:
+	kfree(error_data);
+	kfree(error_ecc);
+	kfree(correct_data);
+	kfree(correct_ecc);
+
+	return err;
 }
 
 #else
 
-static int nand_ecc_test(const size_t size)
+static int nand_ecc_test_run(const size_t size)
 {
 	return 0;
 }
@@ -66,12 +295,13 @@ static int nand_ecc_test(const size_t size)
 
 static int __init ecc_test_init(void)
 {
-	srandom32(jiffies);
+	int err;
 
-	nand_ecc_test(256);
-	nand_ecc_test(512);
+	err = nand_ecc_test_run(256);
+	if (err)
+		return err;
 
-	return 0;
+	return nand_ecc_test_run(512);
 }
 
 static void __exit ecc_test_exit(void)
diff --git a/drivers/mtd/tests/mtd_pagetest.c b/drivers/mtd/tests/mtd_pagetest.c
deleted file mode 100644
index 6bc1b8276c6..00000000000
--- a/drivers/mtd/tests/mtd_pagetest.c
+++ /dev/null
@@ -1,633 +0,0 @@
-/*
- * Copyright (C) 2006-2008 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; see the file COPYING. If not, write to the Free Software
- * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Test page read and write on MTD device.
- *
- * Author: Adrian Hunter <ext-adrian.hunter@nokia.com>
- */
-
-#include <asm/div64.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/err.h>
-#include <linux/mtd/mtd.h>
-#include <linux/slab.h>
-#include <linux/sched.h>
-
-#define PRINT_PREF KERN_INFO "mtd_pagetest: "
-
-static int dev;
-module_param(dev, int, S_IRUGO);
-MODULE_PARM_DESC(dev, "MTD device number to use");
-
-static struct mtd_info *mtd;
-static unsigned char *twopages;
-static unsigned char *writebuf;
-static unsigned char *boundary;
-static unsigned char *bbt;
-
-static int pgsize;
-static int bufsize;
-static int ebcnt;
-static int pgcnt;
-static int errcnt;
-static unsigned long next = 1;
-
-static inline unsigned int simple_rand(void)
-{
-	next = next * 1103515245 + 12345;
-	return (unsigned int)((next / 65536) % 32768);
-}
-
-static inline void simple_srand(unsigned long seed)
-{
-	next = seed;
-}
-
-static void set_random_data(unsigned char *buf, size_t len)
-{
-	size_t i;
-
-	for (i = 0; i < len; ++i)
-		buf[i] = simple_rand();
-}
-
-static int erase_eraseblock(int ebnum)
-{
-	int err;
-	struct erase_info ei;
-	loff_t addr = ebnum * mtd->erasesize;
-
-	memset(&ei, 0, sizeof(struct erase_info));
-	ei.mtd  = mtd;
-	ei.addr = addr;
-	ei.len  = mtd->erasesize;
-
-	err = mtd->erase(mtd, &ei);
-	if (err) {
-		printk(PRINT_PREF "error %d while erasing EB %d\n", err, ebnum);
-		return err;
-	}
-
-	if (ei.state == MTD_ERASE_FAILED) {
-		printk(PRINT_PREF "some erase error occurred at EB %d\n",
-		       ebnum);
-		return -EIO;
-	}
-
-	return 0;
-}
-
-static int write_eraseblock(int ebnum)
-{
-	int err = 0;
-	size_t written = 0;
-	loff_t addr = ebnum * mtd->erasesize;
-
-	set_random_data(writebuf, mtd->erasesize);
-	cond_resched();
-	err = mtd->write(mtd, addr, mtd->erasesize, &written, writebuf);
-	if (err || written != mtd->erasesize)
-		printk(PRINT_PREF "error: write failed at %#llx\n",
-		       (long long)addr);
-
-	return err;
-}
-
-static int verify_eraseblock(int ebnum)
-{
-	uint32_t j;
-	size_t read = 0;
-	int err = 0, i;
-	loff_t addr0, addrn;
-	loff_t addr = ebnum * mtd->erasesize;
-
-	addr0 = 0;
-	for (i = 0; i < ebcnt && bbt[i]; ++i)
-		addr0 += mtd->erasesize;
-
-	addrn = mtd->size;
-	for (i = 0; i < ebcnt && bbt[ebcnt - i - 1]; ++i)
-		addrn -= mtd->erasesize;
-
-	set_random_data(writebuf, mtd->erasesize);
-	for (j = 0; j < pgcnt - 1; ++j, addr += pgsize) {
-		/* Do a read to set the internal dataRAMs to different data */
-		err = mtd->read(mtd, addr0, bufsize, &read, twopages);
-		if (err == -EUCLEAN)
-			err = 0;
-		if (err || read != bufsize) {
-			printk(PRINT_PREF "error: read failed at %#llx\n",
-			       (long long)addr0);
-			return err;
-		}
-		err = mtd->read(mtd, addrn - bufsize, bufsize, &read, twopages);
-		if (err == -EUCLEAN)
-			err = 0;
-		if (err || read != bufsize) {
-			printk(PRINT_PREF "error: read failed at %#llx\n",
-			       (long long)(addrn - bufsize));
-			return err;
-		}
-		memset(twopages, 0, bufsize);
-		read = 0;
-		err = mtd->read(mtd, addr, bufsize, &read, twopages);
-		if (err == -EUCLEAN)
-			err = 0;
-		if (err || read != bufsize) {
-			printk(PRINT_PREF "error: read failed at %#llx\n",
-			       (long long)addr);
-			break;
-		}
-		if (memcmp(twopages, writebuf + (j * pgsize), bufsize)) {
-			printk(PRINT_PREF "error: verify failed at %#llx\n",
-			       (long long)addr);
-			errcnt += 1;
-		}
-	}
-	/* Check boundary between eraseblocks */
-	if (addr <= addrn - pgsize - pgsize && !bbt[ebnum + 1]) {
-		unsigned long oldnext = next;
-		/* Do a read to set the internal dataRAMs to different data */
-		err = mtd->read(mtd, addr0, bufsize, &read, twopages);
-		if (err == -EUCLEAN)
-			err = 0;
-		if (err || read != bufsize) {
-			printk(PRINT_PREF "error: read failed at %#llx\n",
-			       (long long)addr0);
-			return err;
-		}
-		err = mtd->read(mtd, addrn - bufsize, bufsize, &read, twopages);
-		if (err == -EUCLEAN)
-			err = 0;
-		if (err || read != bufsize) {
-			printk(PRINT_PREF "error: read failed at %#llx\n",
-			       (long long)(addrn - bufsize));
-			return err;
-		}
-		memset(twopages, 0, bufsize);
-		read = 0;
-		err = mtd->read(mtd, addr, bufsize, &read, twopages);
-		if (err == -EUCLEAN)
-			err = 0;
-		if (err || read != bufsize) {
-			printk(PRINT_PREF "error: read failed at %#llx\n",
-			       (long long)addr);
-			return err;
-		}
-		memcpy(boundary, writebuf + mtd->erasesize - pgsize, pgsize);
-		set_random_data(boundary + pgsize, pgsize);
-		if (memcmp(twopages, boundary, bufsize)) {
-			printk(PRINT_PREF "error: verify failed at %#llx\n",
-			       (long long)addr);
-			errcnt += 1;
-		}
-		next = oldnext;
-	}
-	return err;
-}
-
-static int crosstest(void)
-{
-	size_t read = 0;
-	int err = 0, i;
-	loff_t addr, addr0, addrn;
-	unsigned char *pp1, *pp2, *pp3, *pp4;
-
-	printk(PRINT_PREF "crosstest\n");
-	pp1 = kmalloc(pgsize * 4, GFP_KERNEL);
-	if (!pp1) {
-		printk(PRINT_PREF "error: cannot allocate memory\n");
-		return -ENOMEM;
-	}
-	pp2 = pp1 + pgsize;
-	pp3 = pp2 + pgsize;
-	pp4 = pp3 + pgsize;
-	memset(pp1, 0, pgsize * 4);
-
-	addr0 = 0;
-	for (i = 0; i < ebcnt && bbt[i]; ++i)
-		addr0 += mtd->erasesize;
-
-	addrn = mtd->size;
-	for (i = 0; i < ebcnt && bbt[ebcnt - i - 1]; ++i)
-		addrn -= mtd->erasesize;
-
-	/* Read 2nd-to-last page to pp1 */
-	read = 0;
-	addr = addrn - pgsize - pgsize;
-	err = mtd->read(mtd, addr, pgsize, &read, pp1);
-	if (err == -EUCLEAN)
-		err = 0;
-	if (err || read != pgsize) {
-		printk(PRINT_PREF "error: read failed at %#llx\n",
-		       (long long)addr);
-		kfree(pp1);
-		return err;
-	}
-
-	/* Read 3rd-to-last page to pp1 */
-	read = 0;
-	addr = addrn - pgsize - pgsize - pgsize;
-	err = mtd->read(mtd, addr, pgsize, &read, pp1);
-	if (err == -EUCLEAN)
-		err = 0;
-	if (err || read != pgsize) {
-		printk(PRINT_PREF "error: read failed at %#llx\n",
-		       (long long)addr);
-		kfree(pp1);
-		return err;
-	}
-
-	/* Read first page to pp2 */
-	read = 0;
-	addr = addr0;
-	printk(PRINT_PREF "reading page at %#llx\n", (long long)addr);
-	err = mtd->read(mtd, addr, pgsize, &read, pp2);
-	if (err == -EUCLEAN)
-		err = 0;
-	if (err || read != pgsize) {
-		printk(PRINT_PREF "error: read failed at %#llx\n",
-		       (long long)addr);
-		kfree(pp1);
-		return err;
-	}
-
-	/* Read last page to pp3 */
-	read = 0;
-	addr = addrn - pgsize;
-	printk(PRINT_PREF "reading page at %#llx\n", (long long)addr);
-	err = mtd->read(mtd, addr, pgsize, &read, pp3);
-	if (err == -EUCLEAN)
-		err = 0;
-	if (err || read != pgsize) {
-		printk(PRINT_PREF "error: read failed at %#llx\n",
-		       (long long)addr);
-		kfree(pp1);
-		return err;
-	}
-
-	/* Read first page again to pp4 */
-	read = 0;
-	addr = addr0;
-	printk(PRINT_PREF "reading page at %#llx\n", (long long)addr);
-	err = mtd->read(mtd, addr, pgsize, &read, pp4);
-	if (err == -EUCLEAN)
-		err = 0;
-	if (err || read != pgsize) {
-		printk(PRINT_PREF "error: read failed at %#llx\n",
-		       (long long)addr);
-		kfree(pp1);
-		return err;
-	}
-
-	/* pp2 and pp4 should be the same */
-	printk(PRINT_PREF "verifying pages read at %#llx match\n",
-	       (long long)addr0);
-	if (memcmp(pp2, pp4, pgsize)) {
-		printk(PRINT_PREF "verify failed!\n");
-		errcnt += 1;
-	} else if (!err)
-		printk(PRINT_PREF "crosstest ok\n");
-	kfree(pp1);
-	return err;
-}
-
-static int erasecrosstest(void)
-{
-	size_t read = 0, written = 0;
-	int err = 0, i, ebnum, ok = 1, ebnum2;
-	loff_t addr0;
-	char *readbuf = twopages;
-
-	printk(PRINT_PREF "erasecrosstest\n");
-
-	ebnum = 0;
-	addr0 = 0;
-	for (i = 0; i < ebcnt && bbt[i]; ++i) {
-		addr0 += mtd->erasesize;
-		ebnum += 1;
-	}
-
-	ebnum2 = ebcnt - 1;
-	while (ebnum2 && bbt[ebnum2])
-		ebnum2 -= 1;
-
-	printk(PRINT_PREF "erasing block %d\n", ebnum);
-	err = erase_eraseblock(ebnum);
-	if (err)
-		return err;
-
-	printk(PRINT_PREF "writing 1st page of block %d\n", ebnum);
-	set_random_data(writebuf, pgsize);
-	strcpy(writebuf, "There is no data like this!");
-	err = mtd->write(mtd, addr0, pgsize, &written, writebuf);
-	if (err || written != pgsize) {
-		printk(PRINT_PREF "error: write failed at %#llx\n",
-		       (long long)addr0);
-		return err ? err : -1;
-	}
-
-	printk(PRINT_PREF "reading 1st page of block %d\n", ebnum);
-	memset(readbuf, 0, pgsize);
-	err = mtd->read(mtd, addr0, pgsize, &read, readbuf);
-	if (err == -EUCLEAN)
-		err = 0;
-	if (err || read != pgsize) {
-		printk(PRINT_PREF "error: read failed at %#llx\n",
-		       (long long)addr0);
-		return err ? err : -1;
-	}
-
-	printk(PRINT_PREF "verifying 1st page of block %d\n", ebnum);
-	if (memcmp(writebuf, readbuf, pgsize)) {
-		printk(PRINT_PREF "verify failed!\n");
-		errcnt += 1;
-		ok = 0;
-		return err;
-	}
-
-	printk(PRINT_PREF "erasing block %d\n", ebnum);
-	err = erase_eraseblock(ebnum);
-	if (err)
-		return err;
-
-	printk(PRINT_PREF "writing 1st page of block %d\n", ebnum);
-	set_random_data(writebuf, pgsize);
-	strcpy(writebuf, "There is no data like this!");
-	err = mtd->write(mtd, addr0, pgsize, &written, writebuf);
-	if (err || written != pgsize) {
-		printk(PRINT_PREF "error: write failed at %#llx\n",
-		       (long long)addr0);
-		return err ? err : -1;
-	}
-
-	printk(PRINT_PREF "erasing block %d\n", ebnum2);
-	err = erase_eraseblock(ebnum2);
-	if (err)
-		return err;
-
-	printk(PRINT_PREF "reading 1st page of block %d\n", ebnum);
-	memset(readbuf, 0, pgsize);
-	err = mtd->read(mtd, addr0, pgsize, &read, readbuf);
-	if (err == -EUCLEAN)
-		err = 0;
-	if (err || read != pgsize) {
-		printk(PRINT_PREF "error: read failed at %#llx\n",
-		       (long long)addr0);
-		return err ? err : -1;
-	}
-
-	printk(PRINT_PREF "verifying 1st page of block %d\n", ebnum);
-	if (memcmp(writebuf, readbuf, pgsize)) {
-		printk(PRINT_PREF "verify failed!\n");
-		errcnt += 1;
-		ok = 0;
-	}
-
-	if (ok && !err)
-		printk(PRINT_PREF "erasecrosstest ok\n");
-	return err;
-}
-
-static int erasetest(void)
-{
-	size_t read = 0, written = 0;
-	int err = 0, i, ebnum, ok = 1;
-	loff_t addr0;
-
-	printk(PRINT_PREF "erasetest\n");
-
-	ebnum = 0;
-	addr0 = 0;
-	for (i = 0; i < ebcnt && bbt[i]; ++i) {
-		addr0 += mtd->erasesize;
-		ebnum += 1;
-	}
-
-	printk(PRINT_PREF "erasing block %d\n", ebnum);
-	err = erase_eraseblock(ebnum);
-	if (err)
-		return err;
-
-	printk(PRINT_PREF "writing 1st page of block %d\n", ebnum);
-	set_random_data(writebuf, pgsize);
-	err = mtd->write(mtd, addr0, pgsize, &written, writebuf);
-	if (err || written != pgsize) {
-		printk(PRINT_PREF "error: write failed at %#llx\n",
-		       (long long)addr0);
-		return err ? err : -1;
-	}
-
-	printk(PRINT_PREF "erasing block %d\n", ebnum);
-	err = erase_eraseblock(ebnum);
-	if (err)
-		return err;
-
-	printk(PRINT_PREF "reading 1st page of block %d\n", ebnum);
-	err = mtd->read(mtd, addr0, pgsize, &read, twopages);
-	if (err == -EUCLEAN)
-		err = 0;
-	if (err || read != pgsize) {
-		printk(PRINT_PREF "error: read failed at %#llx\n",
-		       (long long)addr0);
-		return err ? err : -1;
-	}
-
-	printk(PRINT_PREF "verifying 1st page of block %d is all 0xff\n",
-	       ebnum);
-	for (i = 0; i < pgsize; ++i)
-		if (twopages[i] != 0xff) {
-			printk(PRINT_PREF "verifying all 0xff failed at %d\n",
-			       i);
-			errcnt += 1;
-			ok = 0;
-			break;
-		}
-
-	if (ok && !err)
-		printk(PRINT_PREF "erasetest ok\n");
-
-	return err;
-}
-
-static int is_block_bad(int ebnum)
-{
-	loff_t addr = ebnum * mtd->erasesize;
-	int ret;
-
-	ret = mtd->block_isbad(mtd, addr);
-	if (ret)
-		printk(PRINT_PREF "block %d is bad\n", ebnum);
-	return ret;
-}
-
-static int scan_for_bad_eraseblocks(void)
-{
-	int i, bad = 0;
-
-	bbt = kzalloc(ebcnt, GFP_KERNEL);
-	if (!bbt) {
-		printk(PRINT_PREF "error: cannot allocate memory\n");
-		return -ENOMEM;
-	}
-
-	printk(PRINT_PREF "scanning for bad eraseblocks\n");
-	for (i = 0; i < ebcnt; ++i) {
-		bbt[i] = is_block_bad(i) ? 1 : 0;
-		if (bbt[i])
-			bad += 1;
-		cond_resched();
-	}
-	printk(PRINT_PREF "scanned %d eraseblocks, %d are bad\n", i, bad);
-	return 0;
-}
-
-static int __init mtd_pagetest_init(void)
-{
-	int err = 0;
-	uint64_t tmp;
-	uint32_t i;
-
-	printk(KERN_INFO "\n");
-	printk(KERN_INFO "=================================================\n");
-	printk(PRINT_PREF "MTD device: %d\n", dev);
-
-	mtd = get_mtd_device(NULL, dev);
-	if (IS_ERR(mtd)) {
-		err = PTR_ERR(mtd);
-		printk(PRINT_PREF "error: cannot get MTD device\n");
-		return err;
-	}
-
-	if (mtd->type != MTD_NANDFLASH) {
-		printk(PRINT_PREF "this test requires NAND flash\n");
-		goto out;
-	}
-
-	tmp = mtd->size;
-	do_div(tmp, mtd->erasesize);
-	ebcnt = tmp;
-	pgcnt = mtd->erasesize / mtd->writesize;
-	pgsize = mtd->writesize;
-
-	printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
-	       "page size %u, count of eraseblocks %u, pages per "
-	       "eraseblock %u, OOB size %u\n",
-	       (unsigned long long)mtd->size, mtd->erasesize,
-	       pgsize, ebcnt, pgcnt, mtd->oobsize);
-
-	err = -ENOMEM;
-	bufsize = pgsize * 2;
-	writebuf = kmalloc(mtd->erasesize, GFP_KERNEL);
-	if (!writebuf) {
-		printk(PRINT_PREF "error: cannot allocate memory\n");
-		goto out;
-	}
-	twopages = kmalloc(bufsize, GFP_KERNEL);
-	if (!twopages) {
-		printk(PRINT_PREF "error: cannot allocate memory\n");
-		goto out;
-	}
-	boundary = kmalloc(bufsize, GFP_KERNEL);
-	if (!boundary) {
-		printk(PRINT_PREF "error: cannot allocate memory\n");
-		goto out;
-	}
-
-	err = scan_for_bad_eraseblocks();
-	if (err)
-		goto out;
-
-	/* Erase all eraseblocks */
-	printk(PRINT_PREF "erasing whole device\n");
-	for (i = 0; i < ebcnt; ++i) {
-		if (bbt[i])
-			continue;
-		err = erase_eraseblock(i);
-		if (err)
-			goto out;
-		cond_resched();
-	}
-	printk(PRINT_PREF "erased %u eraseblocks\n", i);
-
-	/* Write all eraseblocks */
-	simple_srand(1);
-	printk(PRINT_PREF "writing whole device\n");
-	for (i = 0; i < ebcnt; ++i) {
-		if (bbt[i])
-			continue;
-		err = write_eraseblock(i);
-		if (err)
-			goto out;
-		if (i % 256 == 0)
-			printk(PRINT_PREF "written up to eraseblock %u\n", i);
-		cond_resched();
-	}
-	printk(PRINT_PREF "written %u eraseblocks\n", i);
-
-	/* Check all eraseblocks */
-	simple_srand(1);
-	printk(PRINT_PREF "verifying all eraseblocks\n");
-	for (i = 0; i < ebcnt; ++i) {
-		if (bbt[i])
-			continue;
-		err = verify_eraseblock(i);
-		if (err)
-			goto out;
-		if (i % 256 == 0)
-			printk(PRINT_PREF "verified up to eraseblock %u\n", i);
-		cond_resched();
-	}
-	printk(PRINT_PREF "verified %u eraseblocks\n", i);
-
-	err = crosstest();
-	if (err)
-		goto out;
-
-	err = erasecrosstest();
-	if (err)
-		goto out;
-
-	err = erasetest();
-	if (err)
-		goto out;
-
-	printk(PRINT_PREF "finished with %d errors\n", errcnt);
-out:
-
-	kfree(bbt);
-	kfree(boundary);
-	kfree(twopages);
-	kfree(writebuf);
-	put_mtd_device(mtd);
-	if (err)
-		printk(PRINT_PREF "error %d occurred\n", err);
-	printk(KERN_INFO "=================================================\n");
-	return err;
-}
-module_init(mtd_pagetest_init);
-
-static void __exit mtd_pagetest_exit(void)
-{
-	return;
-}
-module_exit(mtd_pagetest_exit);
-
-MODULE_DESCRIPTION("NAND page test");
-MODULE_AUTHOR("Adrian Hunter");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/tests/mtd_test.c b/drivers/mtd/tests/mtd_test.c
new file mode 100644
index 00000000000..111ee46a742
--- /dev/null
+++ b/drivers/mtd/tests/mtd_test.c
@@ -0,0 +1,113 @@
+#define pr_fmt(fmt) "mtd_test: " fmt
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/printk.h>
+
+#include "mtd_test.h"
+
+int mtdtest_erase_eraseblock(struct mtd_info *mtd, unsigned int ebnum)
+{
+	int err;
+	struct erase_info ei;
+	loff_t addr = ebnum * mtd->erasesize;
+
+	memset(&ei, 0, sizeof(struct erase_info));
+	ei.mtd  = mtd;
+	ei.addr = addr;
+	ei.len  = mtd->erasesize;
+
+	err = mtd_erase(mtd, &ei);
+	if (err) {
+		pr_info("error %d while erasing EB %d\n", err, ebnum);
+		return err;
+	}
+
+	if (ei.state == MTD_ERASE_FAILED) {
+		pr_info("some erase error occurred at EB %d\n", ebnum);
+		return -EIO;
+	}
+	return 0;
+}
+
+static int is_block_bad(struct mtd_info *mtd, unsigned int ebnum)
+{
+	int ret;
+	loff_t addr = ebnum * mtd->erasesize;
+
+	ret = mtd_block_isbad(mtd, addr);
+	if (ret)
+		pr_info("block %d is bad\n", ebnum);
+
+	return ret;
+}
+
+int mtdtest_scan_for_bad_eraseblocks(struct mtd_info *mtd, unsigned char *bbt,
+					unsigned int eb, int ebcnt)
+{
+	int i, bad = 0;
+
+	if (!mtd_can_have_bb(mtd))
+		return 0;
+
+	pr_info("scanning for bad eraseblocks\n");
+	for (i = 0; i < ebcnt; ++i) {
+		bbt[i] = is_block_bad(mtd, eb + i) ? 1 : 0;
+		if (bbt[i])
+			bad += 1;
+		cond_resched();
+	}
+	pr_info("scanned %d eraseblocks, %d are bad\n", i, bad);
+
+	return 0;
+}
+
+int mtdtest_erase_good_eraseblocks(struct mtd_info *mtd, unsigned char *bbt,
+				unsigned int eb, int ebcnt)
+{
+	int err;
+	unsigned int i;
+
+	for (i = 0; i < ebcnt; ++i) {
+		if (bbt[i])
+			continue;
+		err = mtdtest_erase_eraseblock(mtd, eb + i);
+		if (err)
+			return err;
+		cond_resched();
+	}
+
+	return 0;
+}
+
+int mtdtest_read(struct mtd_info *mtd, loff_t addr, size_t size, void *buf)
+{
+	size_t read;
+	int err;
+
+	err = mtd_read(mtd, addr, size, &read, buf);
+	/* Ignore corrected ECC errors */
+	if (mtd_is_bitflip(err))
+		err = 0;
+	if (!err && read != size)
+		err = -EIO;
+	if (err)
+		pr_err("error: read failed at %#llx\n", addr);
+
+	return err;
+}
+
+int mtdtest_write(struct mtd_info *mtd, loff_t addr, size_t size,
+		const void *buf)
+{
+	size_t written;
+	int err;
+
+	err = mtd_write(mtd, addr, size, &written, buf);
+	if (!err && written != size)
+		err = -EIO;
+	if (err)
+		pr_err("error: write failed at %#llx\n", addr);
+
+	return err;
+}
diff --git a/drivers/mtd/tests/mtd_test.h b/drivers/mtd/tests/mtd_test.h
new file mode 100644
index 00000000000..f437c776c54
--- /dev/null
+++ b/drivers/mtd/tests/mtd_test.h
@@ -0,0 +1,11 @@
+#include <linux/mtd/mtd.h>
+
+int mtdtest_erase_eraseblock(struct mtd_info *mtd, unsigned int ebnum);
+int mtdtest_scan_for_bad_eraseblocks(struct mtd_info *mtd, unsigned char *bbt,
+					unsigned int eb, int ebcnt);
+int mtdtest_erase_good_eraseblocks(struct mtd_info *mtd, unsigned char *bbt,
+				unsigned int eb, int ebcnt);
+
+int mtdtest_read(struct mtd_info *mtd, loff_t addr, size_t size, void *buf);
+int mtdtest_write(struct mtd_info *mtd, loff_t addr, size_t size,
+		const void *buf);
diff --git a/drivers/mtd/tests/nandbiterrs.c b/drivers/mtd/tests/nandbiterrs.c
new file mode 100644
index 00000000000..6f976159611
--- /dev/null
+++ b/drivers/mtd/tests/nandbiterrs.c
@@ -0,0 +1,428 @@
+/*
+ * Copyright © 2012 NetCommWireless
+ * Iwo Mergler <Iwo.Mergler@netcommwireless.com.au>
+ *
+ * Test for multi-bit error recovery on a NAND page This mostly tests the
+ * ECC controller / driver.
+ *
+ * There are two test modes:
+ *
+ *	0 - artificially inserting bit errors until the ECC fails
+ *	    This is the default method and fairly quick. It should
+ *	    be independent of the quality of the FLASH.
+ *
+ *	1 - re-writing the same pattern repeatedly until the ECC fails.
+ *	    This method relies on the physics of NAND FLASH to eventually
+ *	    generate '0' bits if '1' has been written sufficient times.
+ *	    Depending on the NAND, the first bit errors will appear after
+ *	    1000 or more writes and then will usually snowball, reaching the
+ *	    limits of the ECC quickly.
+ *
+ *	    The test stops after 10000 cycles, should your FLASH be
+ *	    exceptionally good and not generate bit errors before that. Try
+ *	    a different page in that case.
+ *
+ * Please note that neither of these tests will significantly 'use up' any
+ * FLASH endurance. Only a maximum of two erase operations will be performed.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; see the file COPYING. If not, write to the Free Software
+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/mtd/mtd.h>
+#include <linux/err.h>
+#include <linux/mtd/nand.h>
+#include <linux/slab.h>
+#include "mtd_test.h"
+
+static int dev;
+module_param(dev, int, S_IRUGO);
+MODULE_PARM_DESC(dev, "MTD device number to use");
+
+static unsigned page_offset;
+module_param(page_offset, uint, S_IRUGO);
+MODULE_PARM_DESC(page_offset, "Page number relative to dev start");
+
+static unsigned seed;
+module_param(seed, uint, S_IRUGO);
+MODULE_PARM_DESC(seed, "Random seed");
+
+static int mode;
+module_param(mode, int, S_IRUGO);
+MODULE_PARM_DESC(mode, "0=incremental errors, 1=overwrite test");
+
+static unsigned max_overwrite = 10000;
+
+static loff_t   offset;     /* Offset of the page we're using. */
+static unsigned eraseblock; /* Eraseblock number for our page. */
+
+/* We assume that the ECC can correct up to a certain number
+ * of biterrors per subpage. */
+static unsigned subsize;  /* Size of subpages */
+static unsigned subcount; /* Number of subpages per page */
+
+static struct mtd_info *mtd;   /* MTD device */
+
+static uint8_t *wbuffer; /* One page write / compare buffer */
+static uint8_t *rbuffer; /* One page read buffer */
+
+/* 'random' bytes from known offsets */
+static uint8_t hash(unsigned offset)
+{
+	unsigned v = offset;
+	unsigned char c;
+	v ^= 0x7f7edfd3;
+	v = v ^ (v >> 3);
+	v = v ^ (v >> 5);
+	v = v ^ (v >> 13);
+	c = v & 0xFF;
+	/* Reverse bits of result. */
+	c = (c & 0x0F) << 4 | (c & 0xF0) >> 4;
+	c = (c & 0x33) << 2 | (c & 0xCC) >> 2;
+	c = (c & 0x55) << 1 | (c & 0xAA) >> 1;
+	return c;
+}
+
+/* Writes wbuffer to page */
+static int write_page(int log)
+{
+	if (log)
+		pr_info("write_page\n");
+
+	return mtdtest_write(mtd, offset, mtd->writesize, wbuffer);
+}
+
+/* Re-writes the data area while leaving the OOB alone. */
+static int rewrite_page(int log)
+{
+	int err = 0;
+	struct mtd_oob_ops ops;
+
+	if (log)
+		pr_info("rewrite page\n");
+
+	ops.mode      = MTD_OPS_RAW; /* No ECC */
+	ops.len       = mtd->writesize;
+	ops.retlen    = 0;
+	ops.ooblen    = 0;
+	ops.oobretlen = 0;
+	ops.ooboffs   = 0;
+	ops.datbuf    = wbuffer;
+	ops.oobbuf    = NULL;
+
+	err = mtd_write_oob(mtd, offset, &ops);
+	if (err || ops.retlen != mtd->writesize) {
+		pr_err("error: write_oob failed (%d)\n", err);
+		if (!err)
+			err = -EIO;
+	}
+
+	return err;
+}
+
+/* Reads page into rbuffer. Returns number of corrected bit errors (>=0)
+ * or error (<0) */
+static int read_page(int log)
+{
+	int err = 0;
+	size_t read;
+	struct mtd_ecc_stats oldstats;
+
+	if (log)
+		pr_info("read_page\n");
+
+	/* Saving last mtd stats */
+	memcpy(&oldstats, &mtd->ecc_stats, sizeof(oldstats));
+
+	err = mtd_read(mtd, offset, mtd->writesize, &read, rbuffer);
+	if (err == -EUCLEAN)
+		err = mtd->ecc_stats.corrected - oldstats.corrected;
+
+	if (err < 0 || read != mtd->writesize) {
+		pr_err("error: read failed at %#llx\n", (long long)offset);
+		if (err >= 0)
+			err = -EIO;
+	}
+
+	return err;
+}
+
+/* Verifies rbuffer against random sequence */
+static int verify_page(int log)
+{
+	unsigned i, errs = 0;
+
+	if (log)
+		pr_info("verify_page\n");
+
+	for (i = 0; i < mtd->writesize; i++) {
+		if (rbuffer[i] != hash(i+seed)) {
+			pr_err("Error: page offset %u, expected %02x, got %02x\n",
+				i, hash(i+seed), rbuffer[i]);
+			errs++;
+		}
+	}
+
+	if (errs)
+		return -EIO;
+	else
+		return 0;
+}
+
+#define CBIT(v, n) ((v) & (1 << (n)))
+#define BCLR(v, n) ((v) = (v) & ~(1 << (n)))
+
+/* Finds the first '1' bit in wbuffer starting at offset 'byte'
+ * and sets it to '0'. */
+static int insert_biterror(unsigned byte)
+{
+	int bit;
+
+	while (byte < mtd->writesize) {
+		for (bit = 7; bit >= 0; bit--) {
+			if (CBIT(wbuffer[byte], bit)) {
+				BCLR(wbuffer[byte], bit);
+				pr_info("Inserted biterror @ %u/%u\n", byte, bit);
+				return 0;
+			}
+		}
+		byte++;
+	}
+	pr_err("biterror: Failed to find a '1' bit\n");
+	return -EIO;
+}
+
+/* Writes 'random' data to page and then introduces deliberate bit
+ * errors into the page, while verifying each step. */
+static int incremental_errors_test(void)
+{
+	int err = 0;
+	unsigned i;
+	unsigned errs_per_subpage = 0;
+
+	pr_info("incremental biterrors test\n");
+
+	for (i = 0; i < mtd->writesize; i++)
+		wbuffer[i] = hash(i+seed);
+
+	err = write_page(1);
+	if (err)
+		goto exit;
+
+	while (1) {
+
+		err = rewrite_page(1);
+		if (err)
+			goto exit;
+
+		err = read_page(1);
+		if (err > 0)
+			pr_info("Read reported %d corrected bit errors\n", err);
+		if (err < 0) {
+			pr_err("After %d biterrors per subpage, read reported error %d\n",
+				errs_per_subpage, err);
+			err = 0;
+			goto exit;
+		}
+
+		err = verify_page(1);
+		if (err) {
+			pr_err("ECC failure, read data is incorrect despite read success\n");
+			goto exit;
+		}
+
+		pr_info("Successfully corrected %d bit errors per subpage\n",
+			errs_per_subpage);
+
+		for (i = 0; i < subcount; i++) {
+			err = insert_biterror(i * subsize);
+			if (err < 0)
+				goto exit;
+		}
+		errs_per_subpage++;
+	}
+
+exit:
+	return err;
+}
+
+
+/* Writes 'random' data to page and then re-writes that same data repeatedly.
+   This eventually develops bit errors (bits written as '1' will slowly become
+   '0'), which are corrected as far as the ECC is capable of. */
+static int overwrite_test(void)
+{
+	int err = 0;
+	unsigned i;
+	unsigned max_corrected = 0;
+	unsigned opno = 0;
+	/* We don't expect more than this many correctable bit errors per
+	 * page. */
+	#define MAXBITS 512
+	static unsigned bitstats[MAXBITS]; /* bit error histogram. */
+
+	memset(bitstats, 0, sizeof(bitstats));
+
+	pr_info("overwrite biterrors test\n");
+
+	for (i = 0; i < mtd->writesize; i++)
+		wbuffer[i] = hash(i+seed);
+
+	err = write_page(1);
+	if (err)
+		goto exit;
+
+	while (opno < max_overwrite) {
+
+		err = rewrite_page(0);
+		if (err)
+			break;
+
+		err = read_page(0);
+		if (err >= 0) {
+			if (err >= MAXBITS) {
+				pr_info("Implausible number of bit errors corrected\n");
+				err = -EIO;
+				break;
+			}
+			bitstats[err]++;
+			if (err > max_corrected) {
+				max_corrected = err;
+				pr_info("Read reported %d corrected bit errors\n",
+					err);
+			}
+		} else { /* err < 0 */
+			pr_info("Read reported error %d\n", err);
+			err = 0;
+			break;
+		}
+
+		err = verify_page(0);
+		if (err) {
+			bitstats[max_corrected] = opno;
+			pr_info("ECC failure, read data is incorrect despite read success\n");
+			break;
+		}
+
+		opno++;
+	}
+
+	/* At this point bitstats[0] contains the number of ops with no bit
+	 * errors, bitstats[1] the number of ops with 1 bit error, etc. */
+	pr_info("Bit error histogram (%d operations total):\n", opno);
+	for (i = 0; i < max_corrected; i++)
+		pr_info("Page reads with %3d corrected bit errors: %d\n",
+			i, bitstats[i]);
+
+exit:
+	return err;
+}
+
+static int __init mtd_nandbiterrs_init(void)
+{
+	int err = 0;
+
+	printk("\n");
+	printk(KERN_INFO "==================================================\n");
+	pr_info("MTD device: %d\n", dev);
+
+	mtd = get_mtd_device(NULL, dev);
+	if (IS_ERR(mtd)) {
+		err = PTR_ERR(mtd);
+		pr_err("error: cannot get MTD device\n");
+		goto exit_mtddev;
+	}
+
+	if (!mtd_type_is_nand(mtd)) {
+		pr_info("this test requires NAND flash\n");
+		err = -ENODEV;
+		goto exit_nand;
+	}
+
+	pr_info("MTD device size %llu, eraseblock=%u, page=%u, oob=%u\n",
+		(unsigned long long)mtd->size, mtd->erasesize,
+		mtd->writesize, mtd->oobsize);
+
+	subsize  = mtd->writesize >> mtd->subpage_sft;
+	subcount = mtd->writesize / subsize;
+
+	pr_info("Device uses %d subpages of %d bytes\n", subcount, subsize);
+
+	offset     = page_offset * mtd->writesize;
+	eraseblock = mtd_div_by_eb(offset, mtd);
+
+	pr_info("Using page=%u, offset=%llu, eraseblock=%u\n",
+		page_offset, offset, eraseblock);
+
+	wbuffer = kmalloc(mtd->writesize, GFP_KERNEL);
+	if (!wbuffer) {
+		err = -ENOMEM;
+		goto exit_wbuffer;
+	}
+
+	rbuffer = kmalloc(mtd->writesize, GFP_KERNEL);
+	if (!rbuffer) {
+		err = -ENOMEM;
+		goto exit_rbuffer;
+	}
+
+	err = mtdtest_erase_eraseblock(mtd, eraseblock);
+	if (err)
+		goto exit_error;
+
+	if (mode == 0)
+		err = incremental_errors_test();
+	else
+		err = overwrite_test();
+
+	if (err)
+		goto exit_error;
+
+	/* We leave the block un-erased in case of test failure. */
+	err = mtdtest_erase_eraseblock(mtd, eraseblock);
+	if (err)
+		goto exit_error;
+
+	err = -EIO;
+	pr_info("finished successfully.\n");
+	printk(KERN_INFO "==================================================\n");
+
+exit_error:
+	kfree(rbuffer);
+exit_rbuffer:
+	kfree(wbuffer);
+exit_wbuffer:
+	/* Nothing */
+exit_nand:
+	put_mtd_device(mtd);
+exit_mtddev:
+	return err;
+}
+
+static void __exit mtd_nandbiterrs_exit(void)
+{
+	return;
+}
+
+module_init(mtd_nandbiterrs_init);
+module_exit(mtd_nandbiterrs_exit);
+
+MODULE_DESCRIPTION("NAND bit error recovery test");
+MODULE_AUTHOR("Iwo Mergler");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/tests/mtd_oobtest.c b/drivers/mtd/tests/oobtest.c
index dec92ae6111..f19ab1acde1 100644
--- a/drivers/mtd/tests/mtd_oobtest.c
+++ b/drivers/mtd/tests/oobtest.c
@@ -19,6 +19,8 @@
  * Author: Adrian Hunter <ext-adrian.hunter@nokia.com>
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <asm/div64.h>
 #include <linux/init.h>
 #include <linux/module.h>
@@ -27,10 +29,11 @@
 #include <linux/mtd/mtd.h>
 #include <linux/slab.h>
 #include <linux/sched.h>
+#include <linux/random.h>
 
-#define PRINT_PREF KERN_INFO "mtd_oobtest: "
+#include "mtd_test.h"
 
-static int dev;
+static int dev = -EINVAL;
 module_param(dev, int, S_IRUGO);
 MODULE_PARM_DESC(dev, "MTD device number to use");
 
@@ -46,70 +49,7 @@ static int use_offset;
 static int use_len;
 static int use_len_max;
 static int vary_offset;
-static unsigned long next = 1;
-
-static inline unsigned int simple_rand(void)
-{
-	next = next * 1103515245 + 12345;
-	return (unsigned int)((next / 65536) % 32768);
-}
-
-static inline void simple_srand(unsigned long seed)
-{
-	next = seed;
-}
-
-static void set_random_data(unsigned char *buf, size_t len)
-{
-	size_t i;
-
-	for (i = 0; i < len; ++i)
-		buf[i] = simple_rand();
-}
-
-static int erase_eraseblock(int ebnum)
-{
-	int err;
-	struct erase_info ei;
-	loff_t addr = ebnum * mtd->erasesize;
-
-	memset(&ei, 0, sizeof(struct erase_info));
-	ei.mtd  = mtd;
-	ei.addr = addr;
-	ei.len  = mtd->erasesize;
-
-	err = mtd->erase(mtd, &ei);
-	if (err) {
-		printk(PRINT_PREF "error %d while erasing EB %d\n", err, ebnum);
-		return err;
-	}
-
-	if (ei.state == MTD_ERASE_FAILED) {
-		printk(PRINT_PREF "some erase error occurred at EB %d\n",
-		       ebnum);
-		return -EIO;
-	}
-
-	return 0;
-}
-
-static int erase_whole_device(void)
-{
-	int err;
-	unsigned int i;
-
-	printk(PRINT_PREF "erasing whole device\n");
-	for (i = 0; i < ebcnt; ++i) {
-		if (bbt[i])
-			continue;
-		err = erase_eraseblock(i);
-		if (err)
-			return err;
-		cond_resched();
-	}
-	printk(PRINT_PREF "erased %u eraseblocks\n", i);
-	return 0;
-}
+static struct rnd_state rnd_state;
 
 static void do_vary_offset(void)
 {
@@ -129,21 +69,21 @@ static int write_eraseblock(int ebnum)
 	int err = 0;
 	loff_t addr = ebnum * mtd->erasesize;
 
+	prandom_bytes_state(&rnd_state, writebuf, use_len_max * pgcnt);
 	for (i = 0; i < pgcnt; ++i, addr += mtd->writesize) {
-		set_random_data(writebuf, use_len);
-		ops.mode      = MTD_OOB_AUTO;
+		ops.mode      = MTD_OPS_AUTO_OOB;
 		ops.len       = 0;
 		ops.retlen    = 0;
 		ops.ooblen    = use_len;
 		ops.oobretlen = 0;
 		ops.ooboffs   = use_offset;
 		ops.datbuf    = NULL;
-		ops.oobbuf    = writebuf;
-		err = mtd->write_oob(mtd, addr, &ops);
+		ops.oobbuf    = writebuf + (use_len_max * i) + use_offset;
+		err = mtd_write_oob(mtd, addr, &ops);
 		if (err || ops.oobretlen != use_len) {
-			printk(PRINT_PREF "error: writeoob failed at %#llx\n",
+			pr_err("error: writeoob failed at %#llx\n",
 			       (long long)addr);
-			printk(PRINT_PREF "error: use_len %d, use_offset %d\n",
+			pr_err("error: use_len %d, use_offset %d\n",
 			       use_len, use_offset);
 			errcnt += 1;
 			return err ? err : -1;
@@ -160,7 +100,7 @@ static int write_whole_device(void)
 	int err;
 	unsigned int i;
 
-	printk(PRINT_PREF "writing OOBs of whole device\n");
+	pr_info("writing OOBs of whole device\n");
 	for (i = 0; i < ebcnt; ++i) {
 		if (bbt[i])
 			continue;
@@ -168,10 +108,10 @@ static int write_whole_device(void)
 		if (err)
 			return err;
 		if (i % 256 == 0)
-			printk(PRINT_PREF "written up to eraseblock %u\n", i);
+			pr_info("written up to eraseblock %u\n", i);
 		cond_resched();
 	}
-	printk(PRINT_PREF "written %u eraseblocks\n", i);
+	pr_info("written %u eraseblocks\n", i);
 	return 0;
 }
 
@@ -182,9 +122,9 @@ static int verify_eraseblock(int ebnum)
 	int err = 0;
 	loff_t addr = ebnum * mtd->erasesize;
 
+	prandom_bytes_state(&rnd_state, writebuf, use_len_max * pgcnt);
 	for (i = 0; i < pgcnt; ++i, addr += mtd->writesize) {
-		set_random_data(writebuf, use_len);
-		ops.mode      = MTD_OOB_AUTO;
+		ops.mode      = MTD_OPS_AUTO_OOB;
 		ops.len       = 0;
 		ops.retlen    = 0;
 		ops.ooblen    = use_len;
@@ -192,26 +132,27 @@ static int verify_eraseblock(int ebnum)
 		ops.ooboffs   = use_offset;
 		ops.datbuf    = NULL;
 		ops.oobbuf    = readbuf;
-		err = mtd->read_oob(mtd, addr, &ops);
+		err = mtd_read_oob(mtd, addr, &ops);
 		if (err || ops.oobretlen != use_len) {
-			printk(PRINT_PREF "error: readoob failed at %#llx\n",
+			pr_err("error: readoob failed at %#llx\n",
 			       (long long)addr);
 			errcnt += 1;
 			return err ? err : -1;
 		}
-		if (memcmp(readbuf, writebuf, use_len)) {
-			printk(PRINT_PREF "error: verify failed at %#llx\n",
+		if (memcmp(readbuf, writebuf + (use_len_max * i) + use_offset,
+			   use_len)) {
+			pr_err("error: verify failed at %#llx\n",
 			       (long long)addr);
 			errcnt += 1;
 			if (errcnt > 1000) {
-				printk(PRINT_PREF "error: too many errors\n");
+				pr_err("error: too many errors\n");
 				return -1;
 			}
 		}
 		if (use_offset != 0 || use_len < mtd->ecclayout->oobavail) {
 			int k;
 
-			ops.mode      = MTD_OOB_AUTO;
+			ops.mode      = MTD_OPS_AUTO_OOB;
 			ops.len       = 0;
 			ops.retlen    = 0;
 			ops.ooblen    = mtd->ecclayout->oobavail;
@@ -219,31 +160,32 @@ static int verify_eraseblock(int ebnum)
 			ops.ooboffs   = 0;
 			ops.datbuf    = NULL;
 			ops.oobbuf    = readbuf;
-			err = mtd->read_oob(mtd, addr, &ops);
+			err = mtd_read_oob(mtd, addr, &ops);
 			if (err || ops.oobretlen != mtd->ecclayout->oobavail) {
-				printk(PRINT_PREF "error: readoob failed at "
-				       "%#llx\n", (long long)addr);
+				pr_err("error: readoob failed at %#llx\n",
+						(long long)addr);
 				errcnt += 1;
 				return err ? err : -1;
 			}
-			if (memcmp(readbuf + use_offset, writebuf, use_len)) {
-				printk(PRINT_PREF "error: verify failed at "
-				       "%#llx\n", (long long)addr);
+			if (memcmp(readbuf + use_offset,
+				   writebuf + (use_len_max * i) + use_offset,
+				   use_len)) {
+				pr_err("error: verify failed at %#llx\n",
+						(long long)addr);
 				errcnt += 1;
 				if (errcnt > 1000) {
-					printk(PRINT_PREF "error: too many "
-					       "errors\n");
+					pr_err("error: too many errors\n");
 					return -1;
 				}
 			}
 			for (k = 0; k < use_offset; ++k)
 				if (readbuf[k] != 0xff) {
-					printk(PRINT_PREF "error: verify 0xff "
+					pr_err("error: verify 0xff "
 					       "failed at %#llx\n",
 					       (long long)addr);
 					errcnt += 1;
 					if (errcnt > 1000) {
-						printk(PRINT_PREF "error: too "
+						pr_err("error: too "
 						       "many errors\n");
 						return -1;
 					}
@@ -251,12 +193,12 @@ static int verify_eraseblock(int ebnum)
 			for (k = use_offset + use_len;
 			     k < mtd->ecclayout->oobavail; ++k)
 				if (readbuf[k] != 0xff) {
-					printk(PRINT_PREF "error: verify 0xff "
+					pr_err("error: verify 0xff "
 					       "failed at %#llx\n",
 					       (long long)addr);
 					errcnt += 1;
 					if (errcnt > 1000) {
-						printk(PRINT_PREF "error: too "
+						pr_err("error: too "
 						       "many errors\n");
 						return -1;
 					}
@@ -275,8 +217,8 @@ static int verify_eraseblock_in_one_go(int ebnum)
 	loff_t addr = ebnum * mtd->erasesize;
 	size_t len = mtd->ecclayout->oobavail * pgcnt;
 
-	set_random_data(writebuf, len);
-	ops.mode      = MTD_OOB_AUTO;
+	prandom_bytes_state(&rnd_state, writebuf, len);
+	ops.mode      = MTD_OPS_AUTO_OOB;
 	ops.len       = 0;
 	ops.retlen    = 0;
 	ops.ooblen    = len;
@@ -284,19 +226,19 @@ static int verify_eraseblock_in_one_go(int ebnum)
 	ops.ooboffs   = 0;
 	ops.datbuf    = NULL;
 	ops.oobbuf    = readbuf;
-	err = mtd->read_oob(mtd, addr, &ops);
+	err = mtd_read_oob(mtd, addr, &ops);
 	if (err || ops.oobretlen != len) {
-		printk(PRINT_PREF "error: readoob failed at %#llx\n",
+		pr_err("error: readoob failed at %#llx\n",
 		       (long long)addr);
 		errcnt += 1;
 		return err ? err : -1;
 	}
 	if (memcmp(readbuf, writebuf, len)) {
-		printk(PRINT_PREF "error: verify failed at %#llx\n",
+		pr_err("error: verify failed at %#llx\n",
 		       (long long)addr);
 		errcnt += 1;
 		if (errcnt > 1000) {
-			printk(PRINT_PREF "error: too many errors\n");
+			pr_err("error: too many errors\n");
 			return -1;
 		}
 	}
@@ -309,7 +251,7 @@ static int verify_all_eraseblocks(void)
 	int err;
 	unsigned int i;
 
-	printk(PRINT_PREF "verifying all eraseblocks\n");
+	pr_info("verifying all eraseblocks\n");
 	for (i = 0; i < ebcnt; ++i) {
 		if (bbt[i])
 			continue;
@@ -317,42 +259,10 @@ static int verify_all_eraseblocks(void)
 		if (err)
 			return err;
 		if (i % 256 == 0)
-			printk(PRINT_PREF "verified up to eraseblock %u\n", i);
+			pr_info("verified up to eraseblock %u\n", i);
 		cond_resched();
 	}
-	printk(PRINT_PREF "verified %u eraseblocks\n", i);
-	return 0;
-}
-
-static int is_block_bad(int ebnum)
-{
-	int ret;
-	loff_t addr = ebnum * mtd->erasesize;
-
-	ret = mtd->block_isbad(mtd, addr);
-	if (ret)
-		printk(PRINT_PREF "block %d is bad\n", ebnum);
-	return ret;
-}
-
-static int scan_for_bad_eraseblocks(void)
-{
-	int i, bad = 0;
-
-	bbt = kmalloc(ebcnt, GFP_KERNEL);
-	if (!bbt) {
-		printk(PRINT_PREF "error: cannot allocate memory\n");
-		return -ENOMEM;
-	}
-
-	printk(PRINT_PREF "scanning for bad eraseblocks\n");
-	for (i = 0; i < ebcnt; ++i) {
-		bbt[i] = is_block_bad(i) ? 1 : 0;
-		if (bbt[i])
-			bad += 1;
-		cond_resched();
-	}
-	printk(PRINT_PREF "scanned %d eraseblocks, %d are bad\n", i, bad);
+	pr_info("verified %u eraseblocks\n", i);
 	return 0;
 }
 
@@ -366,17 +276,24 @@ static int __init mtd_oobtest_init(void)
 
 	printk(KERN_INFO "\n");
 	printk(KERN_INFO "=================================================\n");
-	printk(PRINT_PREF "MTD device: %d\n", dev);
+
+	if (dev < 0) {
+		pr_info("Please specify a valid mtd-device via module parameter\n");
+		pr_crit("CAREFUL: This test wipes all data on the specified MTD device!\n");
+		return -EINVAL;
+	}
+
+	pr_info("MTD device: %d\n", dev);
 
 	mtd = get_mtd_device(NULL, dev);
 	if (IS_ERR(mtd)) {
 		err = PTR_ERR(mtd);
-		printk(PRINT_PREF "error: cannot get MTD device\n");
+		pr_err("error: cannot get MTD device\n");
 		return err;
 	}
 
-	if (mtd->type != MTD_NANDFLASH) {
-		printk(PRINT_PREF "this test requires NAND flash\n");
+	if (!mtd_type_is_nand(mtd)) {
+		pr_info("this test requires NAND flash\n");
 		goto out;
 	}
 
@@ -385,7 +302,7 @@ static int __init mtd_oobtest_init(void)
 	ebcnt = tmp;
 	pgcnt = mtd->erasesize / mtd->writesize;
 
-	printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
+	pr_info("MTD device size %llu, eraseblock size %u, "
 	       "page size %u, count of eraseblocks %u, pages per "
 	       "eraseblock %u, OOB size %u\n",
 	       (unsigned long long)mtd->size, mtd->erasesize,
@@ -393,17 +310,16 @@ static int __init mtd_oobtest_init(void)
 
 	err = -ENOMEM;
 	readbuf = kmalloc(mtd->erasesize, GFP_KERNEL);
-	if (!readbuf) {
-		printk(PRINT_PREF "error: cannot allocate memory\n");
+	if (!readbuf)
 		goto out;
-	}
 	writebuf = kmalloc(mtd->erasesize, GFP_KERNEL);
-	if (!writebuf) {
-		printk(PRINT_PREF "error: cannot allocate memory\n");
+	if (!writebuf)
+		goto out;
+	bbt = kzalloc(ebcnt, GFP_KERNEL);
+	if (!bbt)
 		goto out;
-	}
 
-	err = scan_for_bad_eraseblocks();
+	err = mtdtest_scan_for_bad_eraseblocks(mtd, bbt, 0, ebcnt);
 	if (err)
 		goto out;
 
@@ -413,18 +329,18 @@ static int __init mtd_oobtest_init(void)
 	vary_offset = 0;
 
 	/* First test: write all OOB, read it back and verify */
-	printk(PRINT_PREF "test 1 of 5\n");
+	pr_info("test 1 of 5\n");
 
-	err = erase_whole_device();
+	err = mtdtest_erase_good_eraseblocks(mtd, bbt, 0, ebcnt);
 	if (err)
 		goto out;
 
-	simple_srand(1);
+	prandom_seed_state(&rnd_state, 1);
 	err = write_whole_device();
 	if (err)
 		goto out;
 
-	simple_srand(1);
+	prandom_seed_state(&rnd_state, 1);
 	err = verify_all_eraseblocks();
 	if (err)
 		goto out;
@@ -433,20 +349,20 @@ static int __init mtd_oobtest_init(void)
 	 * Second test: write all OOB, a block at a time, read it back and
 	 * verify.
 	 */
-	printk(PRINT_PREF "test 2 of 5\n");
+	pr_info("test 2 of 5\n");
 
-	err = erase_whole_device();
+	err = mtdtest_erase_good_eraseblocks(mtd, bbt, 0, ebcnt);
 	if (err)
 		goto out;
 
-	simple_srand(3);
+	prandom_seed_state(&rnd_state, 3);
 	err = write_whole_device();
 	if (err)
 		goto out;
 
 	/* Check all eraseblocks */
-	simple_srand(3);
-	printk(PRINT_PREF "verifying all eraseblocks\n");
+	prandom_seed_state(&rnd_state, 3);
+	pr_info("verifying all eraseblocks\n");
 	for (i = 0; i < ebcnt; ++i) {
 		if (bbt[i])
 			continue;
@@ -454,18 +370,18 @@ static int __init mtd_oobtest_init(void)
 		if (err)
 			goto out;
 		if (i % 256 == 0)
-			printk(PRINT_PREF "verified up to eraseblock %u\n", i);
+			pr_info("verified up to eraseblock %u\n", i);
 		cond_resched();
 	}
-	printk(PRINT_PREF "verified %u eraseblocks\n", i);
+	pr_info("verified %u eraseblocks\n", i);
 
 	/*
 	 * Third test: write OOB at varying offsets and lengths, read it back
 	 * and verify.
 	 */
-	printk(PRINT_PREF "test 3 of 5\n");
+	pr_info("test 3 of 5\n");
 
-	err = erase_whole_device();
+	err = mtdtest_erase_good_eraseblocks(mtd, bbt, 0, ebcnt);
 	if (err)
 		goto out;
 
@@ -474,7 +390,7 @@ static int __init mtd_oobtest_init(void)
 	use_len = mtd->ecclayout->oobavail;
 	use_len_max = mtd->ecclayout->oobavail;
 	vary_offset = 1;
-	simple_srand(5);
+	prandom_seed_state(&rnd_state, 5);
 
 	err = write_whole_device();
 	if (err)
@@ -485,7 +401,7 @@ static int __init mtd_oobtest_init(void)
 	use_len = mtd->ecclayout->oobavail;
 	use_len_max = mtd->ecclayout->oobavail;
 	vary_offset = 1;
-	simple_srand(5);
+	prandom_seed_state(&rnd_state, 5);
 	err = verify_all_eraseblocks();
 	if (err)
 		goto out;
@@ -496,9 +412,9 @@ static int __init mtd_oobtest_init(void)
 	vary_offset = 0;
 
 	/* Fourth test: try to write off end of device */
-	printk(PRINT_PREF "test 4 of 5\n");
+	pr_info("test 4 of 5\n");
 
-	err = erase_whole_device();
+	err = mtdtest_erase_good_eraseblocks(mtd, bbt, 0, ebcnt);
 	if (err)
 		goto out;
 
@@ -507,7 +423,7 @@ static int __init mtd_oobtest_init(void)
 		addr0 += mtd->erasesize;
 
 	/* Attempt to write off end of OOB */
-	ops.mode      = MTD_OOB_AUTO;
+	ops.mode      = MTD_OPS_AUTO_OOB;
 	ops.len       = 0;
 	ops.retlen    = 0;
 	ops.ooblen    = 1;
@@ -515,19 +431,19 @@ static int __init mtd_oobtest_init(void)
 	ops.ooboffs   = mtd->ecclayout->oobavail;
 	ops.datbuf    = NULL;
 	ops.oobbuf    = writebuf;
-	printk(PRINT_PREF "attempting to start write past end of OOB\n");
-	printk(PRINT_PREF "an error is expected...\n");
-	err = mtd->write_oob(mtd, addr0, &ops);
+	pr_info("attempting to start write past end of OOB\n");
+	pr_info("an error is expected...\n");
+	err = mtd_write_oob(mtd, addr0, &ops);
 	if (err) {
-		printk(PRINT_PREF "error occurred as expected\n");
+		pr_info("error occurred as expected\n");
 		err = 0;
 	} else {
-		printk(PRINT_PREF "error: can write past end of OOB\n");
+		pr_err("error: can write past end of OOB\n");
 		errcnt += 1;
 	}
 
 	/* Attempt to read off end of OOB */
-	ops.mode      = MTD_OOB_AUTO;
+	ops.mode      = MTD_OPS_AUTO_OOB;
 	ops.len       = 0;
 	ops.retlen    = 0;
 	ops.ooblen    = 1;
@@ -535,23 +451,23 @@ static int __init mtd_oobtest_init(void)
 	ops.ooboffs   = mtd->ecclayout->oobavail;
 	ops.datbuf    = NULL;
 	ops.oobbuf    = readbuf;
-	printk(PRINT_PREF "attempting to start read past end of OOB\n");
-	printk(PRINT_PREF "an error is expected...\n");
-	err = mtd->read_oob(mtd, addr0, &ops);
+	pr_info("attempting to start read past end of OOB\n");
+	pr_info("an error is expected...\n");
+	err = mtd_read_oob(mtd, addr0, &ops);
 	if (err) {
-		printk(PRINT_PREF "error occurred as expected\n");
+		pr_info("error occurred as expected\n");
 		err = 0;
 	} else {
-		printk(PRINT_PREF "error: can read past end of OOB\n");
+		pr_err("error: can read past end of OOB\n");
 		errcnt += 1;
 	}
 
 	if (bbt[ebcnt - 1])
-		printk(PRINT_PREF "skipping end of device tests because last "
+		pr_info("skipping end of device tests because last "
 		       "block is bad\n");
 	else {
 		/* Attempt to write off end of device */
-		ops.mode      = MTD_OOB_AUTO;
+		ops.mode      = MTD_OPS_AUTO_OOB;
 		ops.len       = 0;
 		ops.retlen    = 0;
 		ops.ooblen    = mtd->ecclayout->oobavail + 1;
@@ -559,19 +475,19 @@ static int __init mtd_oobtest_init(void)
 		ops.ooboffs   = 0;
 		ops.datbuf    = NULL;
 		ops.oobbuf    = writebuf;
-		printk(PRINT_PREF "attempting to write past end of device\n");
-		printk(PRINT_PREF "an error is expected...\n");
-		err = mtd->write_oob(mtd, mtd->size - mtd->writesize, &ops);
+		pr_info("attempting to write past end of device\n");
+		pr_info("an error is expected...\n");
+		err = mtd_write_oob(mtd, mtd->size - mtd->writesize, &ops);
 		if (err) {
-			printk(PRINT_PREF "error occurred as expected\n");
+			pr_info("error occurred as expected\n");
 			err = 0;
 		} else {
-			printk(PRINT_PREF "error: wrote past end of device\n");
+			pr_err("error: wrote past end of device\n");
 			errcnt += 1;
 		}
 
 		/* Attempt to read off end of device */
-		ops.mode      = MTD_OOB_AUTO;
+		ops.mode      = MTD_OPS_AUTO_OOB;
 		ops.len       = 0;
 		ops.retlen    = 0;
 		ops.ooblen    = mtd->ecclayout->oobavail + 1;
@@ -579,23 +495,23 @@ static int __init mtd_oobtest_init(void)
 		ops.ooboffs   = 0;
 		ops.datbuf    = NULL;
 		ops.oobbuf    = readbuf;
-		printk(PRINT_PREF "attempting to read past end of device\n");
-		printk(PRINT_PREF "an error is expected...\n");
-		err = mtd->read_oob(mtd, mtd->size - mtd->writesize, &ops);
+		pr_info("attempting to read past end of device\n");
+		pr_info("an error is expected...\n");
+		err = mtd_read_oob(mtd, mtd->size - mtd->writesize, &ops);
 		if (err) {
-			printk(PRINT_PREF "error occurred as expected\n");
+			pr_info("error occurred as expected\n");
 			err = 0;
 		} else {
-			printk(PRINT_PREF "error: read past end of device\n");
+			pr_err("error: read past end of device\n");
 			errcnt += 1;
 		}
 
-		err = erase_eraseblock(ebcnt - 1);
+		err = mtdtest_erase_eraseblock(mtd, ebcnt - 1);
 		if (err)
 			goto out;
 
 		/* Attempt to write off end of device */
-		ops.mode      = MTD_OOB_AUTO;
+		ops.mode      = MTD_OPS_AUTO_OOB;
 		ops.len       = 0;
 		ops.retlen    = 0;
 		ops.ooblen    = mtd->ecclayout->oobavail;
@@ -603,19 +519,19 @@ static int __init mtd_oobtest_init(void)
 		ops.ooboffs   = 1;
 		ops.datbuf    = NULL;
 		ops.oobbuf    = writebuf;
-		printk(PRINT_PREF "attempting to write past end of device\n");
-		printk(PRINT_PREF "an error is expected...\n");
-		err = mtd->write_oob(mtd, mtd->size - mtd->writesize, &ops);
+		pr_info("attempting to write past end of device\n");
+		pr_info("an error is expected...\n");
+		err = mtd_write_oob(mtd, mtd->size - mtd->writesize, &ops);
 		if (err) {
-			printk(PRINT_PREF "error occurred as expected\n");
+			pr_info("error occurred as expected\n");
 			err = 0;
 		} else {
-			printk(PRINT_PREF "error: wrote past end of device\n");
+			pr_err("error: wrote past end of device\n");
 			errcnt += 1;
 		}
 
 		/* Attempt to read off end of device */
-		ops.mode      = MTD_OOB_AUTO;
+		ops.mode      = MTD_OPS_AUTO_OOB;
 		ops.len       = 0;
 		ops.retlen    = 0;
 		ops.ooblen    = mtd->ecclayout->oobavail;
@@ -623,29 +539,29 @@ static int __init mtd_oobtest_init(void)
 		ops.ooboffs   = 1;
 		ops.datbuf    = NULL;
 		ops.oobbuf    = readbuf;
-		printk(PRINT_PREF "attempting to read past end of device\n");
-		printk(PRINT_PREF "an error is expected...\n");
-		err = mtd->read_oob(mtd, mtd->size - mtd->writesize, &ops);
+		pr_info("attempting to read past end of device\n");
+		pr_info("an error is expected...\n");
+		err = mtd_read_oob(mtd, mtd->size - mtd->writesize, &ops);
 		if (err) {
-			printk(PRINT_PREF "error occurred as expected\n");
+			pr_info("error occurred as expected\n");
 			err = 0;
 		} else {
-			printk(PRINT_PREF "error: read past end of device\n");
+			pr_err("error: read past end of device\n");
 			errcnt += 1;
 		}
 	}
 
 	/* Fifth test: write / read across block boundaries */
-	printk(PRINT_PREF "test 5 of 5\n");
+	pr_info("test 5 of 5\n");
 
 	/* Erase all eraseblocks */
-	err = erase_whole_device();
+	err = mtdtest_erase_good_eraseblocks(mtd, bbt, 0, ebcnt);
 	if (err)
 		goto out;
 
 	/* Write all eraseblocks */
-	simple_srand(11);
-	printk(PRINT_PREF "writing OOBs of whole device\n");
+	prandom_seed_state(&rnd_state, 11);
+	pr_info("writing OOBs of whole device\n");
 	for (i = 0; i < ebcnt - 1; ++i) {
 		int cnt = 2;
 		int pg;
@@ -653,37 +569,37 @@ static int __init mtd_oobtest_init(void)
 		if (bbt[i] || bbt[i + 1])
 			continue;
 		addr = (i + 1) * mtd->erasesize - mtd->writesize;
+		prandom_bytes_state(&rnd_state, writebuf, sz * cnt);
 		for (pg = 0; pg < cnt; ++pg) {
-			set_random_data(writebuf, sz);
-			ops.mode      = MTD_OOB_AUTO;
+			ops.mode      = MTD_OPS_AUTO_OOB;
 			ops.len       = 0;
 			ops.retlen    = 0;
 			ops.ooblen    = sz;
 			ops.oobretlen = 0;
 			ops.ooboffs   = 0;
 			ops.datbuf    = NULL;
-			ops.oobbuf    = writebuf;
-			err = mtd->write_oob(mtd, addr, &ops);
+			ops.oobbuf    = writebuf + pg * sz;
+			err = mtd_write_oob(mtd, addr, &ops);
 			if (err)
 				goto out;
 			if (i % 256 == 0)
-				printk(PRINT_PREF "written up to eraseblock "
-				       "%u\n", i);
+				pr_info("written up to eraseblock %u\n", i);
 			cond_resched();
 			addr += mtd->writesize;
 		}
 	}
-	printk(PRINT_PREF "written %u eraseblocks\n", i);
+	pr_info("written %u eraseblocks\n", i);
 
 	/* Check all eraseblocks */
-	simple_srand(11);
-	printk(PRINT_PREF "verifying all eraseblocks\n");
+	prandom_seed_state(&rnd_state, 11);
+	pr_info("verifying all eraseblocks\n");
 	for (i = 0; i < ebcnt - 1; ++i) {
 		if (bbt[i] || bbt[i + 1])
 			continue;
-		set_random_data(writebuf, mtd->ecclayout->oobavail * 2);
+		prandom_bytes_state(&rnd_state, writebuf,
+					mtd->ecclayout->oobavail * 2);
 		addr = (i + 1) * mtd->erasesize - mtd->writesize;
-		ops.mode      = MTD_OOB_AUTO;
+		ops.mode      = MTD_OPS_AUTO_OOB;
 		ops.len       = 0;
 		ops.retlen    = 0;
 		ops.ooblen    = mtd->ecclayout->oobavail * 2;
@@ -691,32 +607,32 @@ static int __init mtd_oobtest_init(void)
 		ops.ooboffs   = 0;
 		ops.datbuf    = NULL;
 		ops.oobbuf    = readbuf;
-		err = mtd->read_oob(mtd, addr, &ops);
+		err = mtd_read_oob(mtd, addr, &ops);
 		if (err)
 			goto out;
 		if (memcmp(readbuf, writebuf, mtd->ecclayout->oobavail * 2)) {
-			printk(PRINT_PREF "error: verify failed at %#llx\n",
+			pr_err("error: verify failed at %#llx\n",
 			       (long long)addr);
 			errcnt += 1;
 			if (errcnt > 1000) {
-				printk(PRINT_PREF "error: too many errors\n");
+				pr_err("error: too many errors\n");
 				goto out;
 			}
 		}
 		if (i % 256 == 0)
-			printk(PRINT_PREF "verified up to eraseblock %u\n", i);
+			pr_info("verified up to eraseblock %u\n", i);
 		cond_resched();
 	}
-	printk(PRINT_PREF "verified %u eraseblocks\n", i);
+	pr_info("verified %u eraseblocks\n", i);
 
-	printk(PRINT_PREF "finished with %d errors\n", errcnt);
+	pr_info("finished with %d errors\n", errcnt);
 out:
 	kfree(bbt);
 	kfree(writebuf);
 	kfree(readbuf);
 	put_mtd_device(mtd);
 	if (err)
-		printk(PRINT_PREF "error %d occurred\n", err);
+		pr_info("error %d occurred\n", err);
 	printk(KERN_INFO "=================================================\n");
 	return err;
 }
diff --git a/drivers/mtd/tests/pagetest.c b/drivers/mtd/tests/pagetest.c
new file mode 100644
index 00000000000..ed2d3f656fd
--- /dev/null
+++ b/drivers/mtd/tests/pagetest.c
@@ -0,0 +1,464 @@
+/*
+ * Copyright (C) 2006-2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; see the file COPYING. If not, write to the Free Software
+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Test page read and write on MTD device.
+ *
+ * Author: Adrian Hunter <ext-adrian.hunter@nokia.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <asm/div64.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/err.h>
+#include <linux/mtd/mtd.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/random.h>
+
+#include "mtd_test.h"
+
+static int dev = -EINVAL;
+module_param(dev, int, S_IRUGO);
+MODULE_PARM_DESC(dev, "MTD device number to use");
+
+static struct mtd_info *mtd;
+static unsigned char *twopages;
+static unsigned char *writebuf;
+static unsigned char *boundary;
+static unsigned char *bbt;
+
+static int pgsize;
+static int bufsize;
+static int ebcnt;
+static int pgcnt;
+static int errcnt;
+static struct rnd_state rnd_state;
+
+static int write_eraseblock(int ebnum)
+{
+	loff_t addr = ebnum * mtd->erasesize;
+
+	prandom_bytes_state(&rnd_state, writebuf, mtd->erasesize);
+	cond_resched();
+	return mtdtest_write(mtd, addr, mtd->erasesize, writebuf);
+}
+
+static int verify_eraseblock(int ebnum)
+{
+	uint32_t j;
+	int err = 0, i;
+	loff_t addr0, addrn;
+	loff_t addr = ebnum * mtd->erasesize;
+
+	addr0 = 0;
+	for (i = 0; i < ebcnt && bbt[i]; ++i)
+		addr0 += mtd->erasesize;
+
+	addrn = mtd->size;
+	for (i = 0; i < ebcnt && bbt[ebcnt - i - 1]; ++i)
+		addrn -= mtd->erasesize;
+
+	prandom_bytes_state(&rnd_state, writebuf, mtd->erasesize);
+	for (j = 0; j < pgcnt - 1; ++j, addr += pgsize) {
+		/* Do a read to set the internal dataRAMs to different data */
+		err = mtdtest_read(mtd, addr0, bufsize, twopages);
+		if (err)
+			return err;
+		err = mtdtest_read(mtd, addrn - bufsize, bufsize, twopages);
+		if (err)
+			return err;
+		memset(twopages, 0, bufsize);
+		err = mtdtest_read(mtd, addr, bufsize, twopages);
+		if (err)
+			break;
+		if (memcmp(twopages, writebuf + (j * pgsize), bufsize)) {
+			pr_err("error: verify failed at %#llx\n",
+			       (long long)addr);
+			errcnt += 1;
+		}
+	}
+	/* Check boundary between eraseblocks */
+	if (addr <= addrn - pgsize - pgsize && !bbt[ebnum + 1]) {
+		struct rnd_state old_state = rnd_state;
+
+		/* Do a read to set the internal dataRAMs to different data */
+		err = mtdtest_read(mtd, addr0, bufsize, twopages);
+		if (err)
+			return err;
+		err = mtdtest_read(mtd, addrn - bufsize, bufsize, twopages);
+		if (err)
+			return err;
+		memset(twopages, 0, bufsize);
+		err = mtdtest_read(mtd, addr, bufsize, twopages);
+		if (err)
+			return err;
+		memcpy(boundary, writebuf + mtd->erasesize - pgsize, pgsize);
+		prandom_bytes_state(&rnd_state, boundary + pgsize, pgsize);
+		if (memcmp(twopages, boundary, bufsize)) {
+			pr_err("error: verify failed at %#llx\n",
+			       (long long)addr);
+			errcnt += 1;
+		}
+		rnd_state = old_state;
+	}
+	return err;
+}
+
+static int crosstest(void)
+{
+	int err = 0, i;
+	loff_t addr, addr0, addrn;
+	unsigned char *pp1, *pp2, *pp3, *pp4;
+
+	pr_info("crosstest\n");
+	pp1 = kmalloc(pgsize * 4, GFP_KERNEL);
+	if (!pp1)
+		return -ENOMEM;
+	pp2 = pp1 + pgsize;
+	pp3 = pp2 + pgsize;
+	pp4 = pp3 + pgsize;
+	memset(pp1, 0, pgsize * 4);
+
+	addr0 = 0;
+	for (i = 0; i < ebcnt && bbt[i]; ++i)
+		addr0 += mtd->erasesize;
+
+	addrn = mtd->size;
+	for (i = 0; i < ebcnt && bbt[ebcnt - i - 1]; ++i)
+		addrn -= mtd->erasesize;
+
+	/* Read 2nd-to-last page to pp1 */
+	addr = addrn - pgsize - pgsize;
+	err = mtdtest_read(mtd, addr, pgsize, pp1);
+	if (err) {
+		kfree(pp1);
+		return err;
+	}
+
+	/* Read 3rd-to-last page to pp1 */
+	addr = addrn - pgsize - pgsize - pgsize;
+	err = mtdtest_read(mtd, addr, pgsize, pp1);
+	if (err) {
+		kfree(pp1);
+		return err;
+	}
+
+	/* Read first page to pp2 */
+	addr = addr0;
+	pr_info("reading page at %#llx\n", (long long)addr);
+	err = mtdtest_read(mtd, addr, pgsize, pp2);
+	if (err) {
+		kfree(pp1);
+		return err;
+	}
+
+	/* Read last page to pp3 */
+	addr = addrn - pgsize;
+	pr_info("reading page at %#llx\n", (long long)addr);
+	err = mtdtest_read(mtd, addr, pgsize, pp3);
+	if (err) {
+		kfree(pp1);
+		return err;
+	}
+
+	/* Read first page again to pp4 */
+	addr = addr0;
+	pr_info("reading page at %#llx\n", (long long)addr);
+	err = mtdtest_read(mtd, addr, pgsize, pp4);
+	if (err) {
+		kfree(pp1);
+		return err;
+	}
+
+	/* pp2 and pp4 should be the same */
+	pr_info("verifying pages read at %#llx match\n",
+	       (long long)addr0);
+	if (memcmp(pp2, pp4, pgsize)) {
+		pr_err("verify failed!\n");
+		errcnt += 1;
+	} else if (!err)
+		pr_info("crosstest ok\n");
+	kfree(pp1);
+	return err;
+}
+
+static int erasecrosstest(void)
+{
+	int err = 0, i, ebnum, ebnum2;
+	loff_t addr0;
+	char *readbuf = twopages;
+
+	pr_info("erasecrosstest\n");
+
+	ebnum = 0;
+	addr0 = 0;
+	for (i = 0; i < ebcnt && bbt[i]; ++i) {
+		addr0 += mtd->erasesize;
+		ebnum += 1;
+	}
+
+	ebnum2 = ebcnt - 1;
+	while (ebnum2 && bbt[ebnum2])
+		ebnum2 -= 1;
+
+	pr_info("erasing block %d\n", ebnum);
+	err = mtdtest_erase_eraseblock(mtd, ebnum);
+	if (err)
+		return err;
+
+	pr_info("writing 1st page of block %d\n", ebnum);
+	prandom_bytes_state(&rnd_state, writebuf, pgsize);
+	strcpy(writebuf, "There is no data like this!");
+	err = mtdtest_write(mtd, addr0, pgsize, writebuf);
+	if (err)
+		return err;
+
+	pr_info("reading 1st page of block %d\n", ebnum);
+	memset(readbuf, 0, pgsize);
+	err = mtdtest_read(mtd, addr0, pgsize, readbuf);
+	if (err)
+		return err;
+
+	pr_info("verifying 1st page of block %d\n", ebnum);
+	if (memcmp(writebuf, readbuf, pgsize)) {
+		pr_err("verify failed!\n");
+		errcnt += 1;
+		return -1;
+	}
+
+	pr_info("erasing block %d\n", ebnum);
+	err = mtdtest_erase_eraseblock(mtd, ebnum);
+	if (err)
+		return err;
+
+	pr_info("writing 1st page of block %d\n", ebnum);
+	prandom_bytes_state(&rnd_state, writebuf, pgsize);
+	strcpy(writebuf, "There is no data like this!");
+	err = mtdtest_write(mtd, addr0, pgsize, writebuf);
+	if (err)
+		return err;
+
+	pr_info("erasing block %d\n", ebnum2);
+	err = mtdtest_erase_eraseblock(mtd, ebnum2);
+	if (err)
+		return err;
+
+	pr_info("reading 1st page of block %d\n", ebnum);
+	memset(readbuf, 0, pgsize);
+	err = mtdtest_read(mtd, addr0, pgsize, readbuf);
+	if (err)
+		return err;
+
+	pr_info("verifying 1st page of block %d\n", ebnum);
+	if (memcmp(writebuf, readbuf, pgsize)) {
+		pr_err("verify failed!\n");
+		errcnt += 1;
+		return -1;
+	}
+
+	if (!err)
+		pr_info("erasecrosstest ok\n");
+	return err;
+}
+
+static int erasetest(void)
+{
+	int err = 0, i, ebnum, ok = 1;
+	loff_t addr0;
+
+	pr_info("erasetest\n");
+
+	ebnum = 0;
+	addr0 = 0;
+	for (i = 0; i < ebcnt && bbt[i]; ++i) {
+		addr0 += mtd->erasesize;
+		ebnum += 1;
+	}
+
+	pr_info("erasing block %d\n", ebnum);
+	err = mtdtest_erase_eraseblock(mtd, ebnum);
+	if (err)
+		return err;
+
+	pr_info("writing 1st page of block %d\n", ebnum);
+	prandom_bytes_state(&rnd_state, writebuf, pgsize);
+	err = mtdtest_write(mtd, addr0, pgsize, writebuf);
+	if (err)
+		return err;
+
+	pr_info("erasing block %d\n", ebnum);
+	err = mtdtest_erase_eraseblock(mtd, ebnum);
+	if (err)
+		return err;
+
+	pr_info("reading 1st page of block %d\n", ebnum);
+	err = mtdtest_read(mtd, addr0, pgsize, twopages);
+	if (err)
+		return err;
+
+	pr_info("verifying 1st page of block %d is all 0xff\n",
+	       ebnum);
+	for (i = 0; i < pgsize; ++i)
+		if (twopages[i] != 0xff) {
+			pr_err("verifying all 0xff failed at %d\n",
+			       i);
+			errcnt += 1;
+			ok = 0;
+			break;
+		}
+
+	if (ok && !err)
+		pr_info("erasetest ok\n");
+
+	return err;
+}
+
+static int __init mtd_pagetest_init(void)
+{
+	int err = 0;
+	uint64_t tmp;
+	uint32_t i;
+
+	printk(KERN_INFO "\n");
+	printk(KERN_INFO "=================================================\n");
+
+	if (dev < 0) {
+		pr_info("Please specify a valid mtd-device via module parameter\n");
+		pr_crit("CAREFUL: This test wipes all data on the specified MTD device!\n");
+		return -EINVAL;
+	}
+
+	pr_info("MTD device: %d\n", dev);
+
+	mtd = get_mtd_device(NULL, dev);
+	if (IS_ERR(mtd)) {
+		err = PTR_ERR(mtd);
+		pr_err("error: cannot get MTD device\n");
+		return err;
+	}
+
+	if (!mtd_type_is_nand(mtd)) {
+		pr_info("this test requires NAND flash\n");
+		goto out;
+	}
+
+	tmp = mtd->size;
+	do_div(tmp, mtd->erasesize);
+	ebcnt = tmp;
+	pgcnt = mtd->erasesize / mtd->writesize;
+	pgsize = mtd->writesize;
+
+	pr_info("MTD device size %llu, eraseblock size %u, "
+	       "page size %u, count of eraseblocks %u, pages per "
+	       "eraseblock %u, OOB size %u\n",
+	       (unsigned long long)mtd->size, mtd->erasesize,
+	       pgsize, ebcnt, pgcnt, mtd->oobsize);
+
+	err = -ENOMEM;
+	bufsize = pgsize * 2;
+	writebuf = kmalloc(mtd->erasesize, GFP_KERNEL);
+	if (!writebuf)
+		goto out;
+	twopages = kmalloc(bufsize, GFP_KERNEL);
+	if (!twopages)
+		goto out;
+	boundary = kmalloc(bufsize, GFP_KERNEL);
+	if (!boundary)
+		goto out;
+
+	bbt = kzalloc(ebcnt, GFP_KERNEL);
+	if (!bbt)
+		goto out;
+	err = mtdtest_scan_for_bad_eraseblocks(mtd, bbt, 0, ebcnt);
+	if (err)
+		goto out;
+
+	/* Erase all eraseblocks */
+	pr_info("erasing whole device\n");
+	err = mtdtest_erase_good_eraseblocks(mtd, bbt, 0, ebcnt);
+	if (err)
+		goto out;
+	pr_info("erased %u eraseblocks\n", ebcnt);
+
+	/* Write all eraseblocks */
+	prandom_seed_state(&rnd_state, 1);
+	pr_info("writing whole device\n");
+	for (i = 0; i < ebcnt; ++i) {
+		if (bbt[i])
+			continue;
+		err = write_eraseblock(i);
+		if (err)
+			goto out;
+		if (i % 256 == 0)
+			pr_info("written up to eraseblock %u\n", i);
+		cond_resched();
+	}
+	pr_info("written %u eraseblocks\n", i);
+
+	/* Check all eraseblocks */
+	prandom_seed_state(&rnd_state, 1);
+	pr_info("verifying all eraseblocks\n");
+	for (i = 0; i < ebcnt; ++i) {
+		if (bbt[i])
+			continue;
+		err = verify_eraseblock(i);
+		if (err)
+			goto out;
+		if (i % 256 == 0)
+			pr_info("verified up to eraseblock %u\n", i);
+		cond_resched();
+	}
+	pr_info("verified %u eraseblocks\n", i);
+
+	err = crosstest();
+	if (err)
+		goto out;
+
+	err = erasecrosstest();
+	if (err)
+		goto out;
+
+	err = erasetest();
+	if (err)
+		goto out;
+
+	pr_info("finished with %d errors\n", errcnt);
+out:
+
+	kfree(bbt);
+	kfree(boundary);
+	kfree(twopages);
+	kfree(writebuf);
+	put_mtd_device(mtd);
+	if (err)
+		pr_info("error %d occurred\n", err);
+	printk(KERN_INFO "=================================================\n");
+	return err;
+}
+module_init(mtd_pagetest_init);
+
+static void __exit mtd_pagetest_exit(void)
+{
+	return;
+}
+module_exit(mtd_pagetest_exit);
+
+MODULE_DESCRIPTION("NAND page test");
+MODULE_AUTHOR("Adrian Hunter");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/tests/mtd_readtest.c b/drivers/mtd/tests/readtest.c
index afe71aa15c4..626e66d0f7e 100644
--- a/drivers/mtd/tests/mtd_readtest.c
+++ b/drivers/mtd/tests/readtest.c
@@ -19,6 +19,8 @@
  * Author: Adrian Hunter <ext-adrian.hunter@nokia.com>
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
@@ -27,9 +29,9 @@
 #include <linux/slab.h>
 #include <linux/sched.h>
 
-#define PRINT_PREF KERN_INFO "mtd_readtest: "
+#include "mtd_test.h"
 
-static int dev;
+static int dev = -EINVAL;
 module_param(dev, int, S_IRUGO);
 MODULE_PARM_DESC(dev, "MTD device number to use");
 
@@ -44,29 +46,22 @@ static int pgcnt;
 
 static int read_eraseblock_by_page(int ebnum)
 {
-	size_t read = 0;
 	int i, ret, err = 0;
 	loff_t addr = ebnum * mtd->erasesize;
 	void *buf = iobuf;
 	void *oobbuf = iobuf1;
 
 	for (i = 0; i < pgcnt; i++) {
-		memset(buf, 0 , pgcnt);
-		ret = mtd->read(mtd, addr, pgsize, &read, buf);
-		if (ret == -EUCLEAN)
-			ret = 0;
-		if (ret || read != pgsize) {
-			printk(PRINT_PREF "error: read failed at %#llx\n",
-			       (long long)addr);
+		memset(buf, 0 , pgsize);
+		ret = mtdtest_read(mtd, addr, pgsize, buf);
+		if (ret) {
 			if (!err)
 				err = ret;
-			if (!err)
-				err = -EINVAL;
 		}
 		if (mtd->oobsize) {
 			struct mtd_oob_ops ops;
 
-			ops.mode      = MTD_OOB_PLACE;
+			ops.mode      = MTD_OPS_PLACE_OOB;
 			ops.len       = 0;
 			ops.retlen    = 0;
 			ops.ooblen    = mtd->oobsize;
@@ -74,9 +69,10 @@ static int read_eraseblock_by_page(int ebnum)
 			ops.ooboffs   = 0;
 			ops.datbuf    = NULL;
 			ops.oobbuf    = oobbuf;
-			ret = mtd->read_oob(mtd, addr, &ops);
-			if (ret || ops.oobretlen != mtd->oobsize) {
-				printk(PRINT_PREF "error: read oob failed at "
+			ret = mtd_read_oob(mtd, addr, &ops);
+			if ((ret && !mtd_is_bitflip(ret)) ||
+					ops.oobretlen != mtd->oobsize) {
+				pr_err("error: read oob failed at "
 						  "%#llx\n", (long long)addr);
 				if (!err)
 					err = ret;
@@ -98,7 +94,7 @@ static void dump_eraseblock(int ebnum)
 	char line[128];
 	int pg, oob;
 
-	printk(PRINT_PREF "dumping eraseblock %d\n", ebnum);
+	pr_info("dumping eraseblock %d\n", ebnum);
 	n = mtd->erasesize;
 	for (i = 0; i < n;) {
 		char *p = line;
@@ -111,7 +107,7 @@ static void dump_eraseblock(int ebnum)
 	}
 	if (!mtd->oobsize)
 		return;
-	printk(PRINT_PREF "dumping oob from eraseblock %d\n", ebnum);
+	pr_info("dumping oob from eraseblock %d\n", ebnum);
 	n = mtd->oobsize;
 	for (pg = 0, i = 0; pg < pgcnt; pg++)
 		for (oob = 0; oob < n;) {
@@ -126,42 +122,6 @@ static void dump_eraseblock(int ebnum)
 		}
 }
 
-static int is_block_bad(int ebnum)
-{
-	loff_t addr = ebnum * mtd->erasesize;
-	int ret;
-
-	ret = mtd->block_isbad(mtd, addr);
-	if (ret)
-		printk(PRINT_PREF "block %d is bad\n", ebnum);
-	return ret;
-}
-
-static int scan_for_bad_eraseblocks(void)
-{
-	int i, bad = 0;
-
-	bbt = kzalloc(ebcnt, GFP_KERNEL);
-	if (!bbt) {
-		printk(PRINT_PREF "error: cannot allocate memory\n");
-		return -ENOMEM;
-	}
-
-	/* NOR flash does not implement block_isbad */
-	if (mtd->block_isbad == NULL)
-		return 0;
-
-	printk(PRINT_PREF "scanning for bad eraseblocks\n");
-	for (i = 0; i < ebcnt; ++i) {
-		bbt[i] = is_block_bad(i) ? 1 : 0;
-		if (bbt[i])
-			bad += 1;
-		cond_resched();
-	}
-	printk(PRINT_PREF "scanned %d eraseblocks, %d are bad\n", i, bad);
-	return 0;
-}
-
 static int __init mtd_readtest_init(void)
 {
 	uint64_t tmp;
@@ -169,17 +129,23 @@ static int __init mtd_readtest_init(void)
 
 	printk(KERN_INFO "\n");
 	printk(KERN_INFO "=================================================\n");
-	printk(PRINT_PREF "MTD device: %d\n", dev);
+
+	if (dev < 0) {
+		pr_info("Please specify a valid mtd-device via module parameter\n");
+		return -EINVAL;
+	}
+
+	pr_info("MTD device: %d\n", dev);
 
 	mtd = get_mtd_device(NULL, dev);
 	if (IS_ERR(mtd)) {
 		err = PTR_ERR(mtd);
-		printk(PRINT_PREF "error: Cannot get MTD device\n");
+		pr_err("error: Cannot get MTD device\n");
 		return err;
 	}
 
 	if (mtd->writesize == 1) {
-		printk(PRINT_PREF "not NAND flash, assume page size is 512 "
+		pr_info("not NAND flash, assume page size is 512 "
 		       "bytes.\n");
 		pgsize = 512;
 	} else
@@ -190,7 +156,7 @@ static int __init mtd_readtest_init(void)
 	ebcnt = tmp;
 	pgcnt = mtd->erasesize / pgsize;
 
-	printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
+	pr_info("MTD device size %llu, eraseblock size %u, "
 	       "page size %u, count of eraseblocks %u, pages per "
 	       "eraseblock %u, OOB size %u\n",
 	       (unsigned long long)mtd->size, mtd->erasesize,
@@ -198,22 +164,21 @@ static int __init mtd_readtest_init(void)
 
 	err = -ENOMEM;
 	iobuf = kmalloc(mtd->erasesize, GFP_KERNEL);
-	if (!iobuf) {
-		printk(PRINT_PREF "error: cannot allocate memory\n");
+	if (!iobuf)
 		goto out;
-	}
 	iobuf1 = kmalloc(mtd->erasesize, GFP_KERNEL);
-	if (!iobuf1) {
-		printk(PRINT_PREF "error: cannot allocate memory\n");
+	if (!iobuf1)
 		goto out;
-	}
 
-	err = scan_for_bad_eraseblocks();
+	bbt = kzalloc(ebcnt, GFP_KERNEL);
+	if (!bbt)
+		goto out;
+	err = mtdtest_scan_for_bad_eraseblocks(mtd, bbt, 0, ebcnt);
 	if (err)
 		goto out;
 
 	/* Read all eraseblocks 1 page at a time */
-	printk(PRINT_PREF "testing page read\n");
+	pr_info("testing page read\n");
 	for (i = 0; i < ebcnt; ++i) {
 		int ret;
 
@@ -229,9 +194,9 @@ static int __init mtd_readtest_init(void)
 	}
 
 	if (err)
-		printk(PRINT_PREF "finished with errors\n");
+		pr_info("finished with errors\n");
 	else
-		printk(PRINT_PREF "finished\n");
+		pr_info("finished\n");
 
 out:
 
@@ -240,7 +205,7 @@ out:
 	kfree(bbt);
 	put_mtd_device(mtd);
 	if (err)
-		printk(PRINT_PREF "error %d occurred\n", err);
+		pr_info("error %d occurred\n", err);
 	printk(KERN_INFO "=================================================\n");
 	return err;
 }
diff --git a/drivers/mtd/tests/mtd_speedtest.c b/drivers/mtd/tests/speedtest.c
index 161feeb7b8b..87ff6a29f84 100644
--- a/drivers/mtd/tests/mtd_speedtest.c
+++ b/drivers/mtd/tests/speedtest.c
@@ -16,9 +16,11 @@
  *
  * Test read and write speed of a MTD device.
  *
- * Author: Adrian Hunter <ext-adrian.hunter@nokia.com>
+ * Author: Adrian Hunter <adrian.hunter@nokia.com>
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
@@ -26,13 +28,19 @@
 #include <linux/mtd/mtd.h>
 #include <linux/slab.h>
 #include <linux/sched.h>
+#include <linux/random.h>
 
-#define PRINT_PREF KERN_INFO "mtd_speedtest: "
+#include "mtd_test.h"
 
-static int dev;
+static int dev = -EINVAL;
 module_param(dev, int, S_IRUGO);
 MODULE_PARM_DESC(dev, "MTD device number to use");
 
+static int count;
+module_param(count, int, S_IRUGO);
+MODULE_PARM_DESC(count, "Maximum number of eraseblocks to use "
+			"(0 means use all)");
+
 static struct mtd_info *mtd;
 static unsigned char *iobuf;
 static unsigned char *bbt;
@@ -42,28 +50,8 @@ static int ebcnt;
 static int pgcnt;
 static int goodebcnt;
 static struct timeval start, finish;
-static unsigned long next = 1;
-
-static inline unsigned int simple_rand(void)
-{
-	next = next * 1103515245 + 12345;
-	return (unsigned int)((next / 65536) % 32768);
-}
 
-static inline void simple_srand(unsigned long seed)
-{
-	next = seed;
-}
-
-static void set_random_data(unsigned char *buf, size_t len)
-{
-	size_t i;
-
-	for (i = 0; i < len; ++i)
-		buf[i] = simple_rand();
-}
-
-static int erase_eraseblock(int ebnum)
+static int multiblock_erase(int ebnum, int blocks)
 {
 	int err;
 	struct erase_info ei;
@@ -72,71 +60,41 @@ static int erase_eraseblock(int ebnum)
 	memset(&ei, 0, sizeof(struct erase_info));
 	ei.mtd  = mtd;
 	ei.addr = addr;
-	ei.len  = mtd->erasesize;
+	ei.len  = mtd->erasesize * blocks;
 
-	err = mtd->erase(mtd, &ei);
+	err = mtd_erase(mtd, &ei);
 	if (err) {
-		printk(PRINT_PREF "error %d while erasing EB %d\n", err, ebnum);
+		pr_err("error %d while erasing EB %d, blocks %d\n",
+		       err, ebnum, blocks);
 		return err;
 	}
 
 	if (ei.state == MTD_ERASE_FAILED) {
-		printk(PRINT_PREF "some erase error occurred at EB %d\n",
-		       ebnum);
+		pr_err("some erase error occurred at EB %d,"
+		       "blocks %d\n", ebnum, blocks);
 		return -EIO;
 	}
 
 	return 0;
 }
 
-static int erase_whole_device(void)
-{
-	int err;
-	unsigned int i;
-
-	for (i = 0; i < ebcnt; ++i) {
-		if (bbt[i])
-			continue;
-		err = erase_eraseblock(i);
-		if (err)
-			return err;
-		cond_resched();
-	}
-	return 0;
-}
-
 static int write_eraseblock(int ebnum)
 {
-	size_t written = 0;
-	int err = 0;
 	loff_t addr = ebnum * mtd->erasesize;
 
-	err = mtd->write(mtd, addr, mtd->erasesize, &written, iobuf);
-	if (err || written != mtd->erasesize) {
-		printk(PRINT_PREF "error: write failed at %#llx\n", addr);
-		if (!err)
-			err = -EINVAL;
-	}
-
-	return err;
+	return mtdtest_write(mtd, addr, mtd->erasesize, iobuf);
 }
 
 static int write_eraseblock_by_page(int ebnum)
 {
-	size_t written = 0;
 	int i, err = 0;
 	loff_t addr = ebnum * mtd->erasesize;
 	void *buf = iobuf;
 
 	for (i = 0; i < pgcnt; i++) {
-		err = mtd->write(mtd, addr, pgsize, &written, buf);
-		if (err || written != pgsize) {
-			printk(PRINT_PREF "error: write failed at %#llx\n",
-			       addr);
-			if (!err)
-				err = -EINVAL;
+		err = mtdtest_write(mtd, addr, pgsize, buf);
+		if (err)
 			break;
-		}
 		addr += pgsize;
 		buf += pgsize;
 	}
@@ -146,74 +104,41 @@ static int write_eraseblock_by_page(int ebnum)
 
 static int write_eraseblock_by_2pages(int ebnum)
 {
-	size_t written = 0, sz = pgsize * 2;
+	size_t sz = pgsize * 2;
 	int i, n = pgcnt / 2, err = 0;
 	loff_t addr = ebnum * mtd->erasesize;
 	void *buf = iobuf;
 
 	for (i = 0; i < n; i++) {
-		err = mtd->write(mtd, addr, sz, &written, buf);
-		if (err || written != sz) {
-			printk(PRINT_PREF "error: write failed at %#llx\n",
-			       addr);
-			if (!err)
-				err = -EINVAL;
+		err = mtdtest_write(mtd, addr, sz, buf);
+		if (err)
 			return err;
-		}
 		addr += sz;
 		buf += sz;
 	}
-	if (pgcnt % 2) {
-		err = mtd->write(mtd, addr, pgsize, &written, buf);
-		if (err || written != pgsize) {
-			printk(PRINT_PREF "error: write failed at %#llx\n",
-			       addr);
-			if (!err)
-				err = -EINVAL;
-		}
-	}
+	if (pgcnt % 2)
+		err = mtdtest_write(mtd, addr, pgsize, buf);
 
 	return err;
 }
 
 static int read_eraseblock(int ebnum)
 {
-	size_t read = 0;
-	int err = 0;
 	loff_t addr = ebnum * mtd->erasesize;
 
-	err = mtd->read(mtd, addr, mtd->erasesize, &read, iobuf);
-	/* Ignore corrected ECC errors */
-	if (err == -EUCLEAN)
-		err = 0;
-	if (err || read != mtd->erasesize) {
-		printk(PRINT_PREF "error: read failed at %#llx\n", addr);
-		if (!err)
-			err = -EINVAL;
-	}
-
-	return err;
+	return mtdtest_read(mtd, addr, mtd->erasesize, iobuf);
 }
 
 static int read_eraseblock_by_page(int ebnum)
 {
-	size_t read = 0;
 	int i, err = 0;
 	loff_t addr = ebnum * mtd->erasesize;
 	void *buf = iobuf;
 
 	for (i = 0; i < pgcnt; i++) {
-		err = mtd->read(mtd, addr, pgsize, &read, buf);
-		/* Ignore corrected ECC errors */
-		if (err == -EUCLEAN)
-			err = 0;
-		if (err || read != pgsize) {
-			printk(PRINT_PREF "error: read failed at %#llx\n",
-			       addr);
-			if (!err)
-				err = -EINVAL;
+		err = mtdtest_read(mtd, addr, pgsize, buf);
+		if (err)
 			break;
-		}
 		addr += pgsize;
 		buf += pgsize;
 	}
@@ -223,53 +148,24 @@ static int read_eraseblock_by_page(int ebnum)
 
 static int read_eraseblock_by_2pages(int ebnum)
 {
-	size_t read = 0, sz = pgsize * 2;
+	size_t sz = pgsize * 2;
 	int i, n = pgcnt / 2, err = 0;
 	loff_t addr = ebnum * mtd->erasesize;
 	void *buf = iobuf;
 
 	for (i = 0; i < n; i++) {
-		err = mtd->read(mtd, addr, sz, &read, buf);
-		/* Ignore corrected ECC errors */
-		if (err == -EUCLEAN)
-			err = 0;
-		if (err || read != sz) {
-			printk(PRINT_PREF "error: read failed at %#llx\n",
-			       addr);
-			if (!err)
-				err = -EINVAL;
+		err = mtdtest_read(mtd, addr, sz, buf);
+		if (err)
 			return err;
-		}
 		addr += sz;
 		buf += sz;
 	}
-	if (pgcnt % 2) {
-		err = mtd->read(mtd, addr, pgsize, &read, buf);
-		/* Ignore corrected ECC errors */
-		if (err == -EUCLEAN)
-			err = 0;
-		if (err || read != pgsize) {
-			printk(PRINT_PREF "error: read failed at %#llx\n",
-			       addr);
-			if (!err)
-				err = -EINVAL;
-		}
-	}
+	if (pgcnt % 2)
+		err = mtdtest_read(mtd, addr, pgsize, buf);
 
 	return err;
 }
 
-static int is_block_bad(int ebnum)
-{
-	loff_t addr = ebnum * mtd->erasesize;
-	int ret;
-
-	ret = mtd->block_isbad(mtd, addr);
-	if (ret)
-		printk(PRINT_PREF "block %d is bad\n", ebnum);
-	return ret;
-}
-
 static inline void start_timing(void)
 {
 	do_gettimeofday(&start);
@@ -282,61 +178,47 @@ static inline void stop_timing(void)
 
 static long calc_speed(void)
 {
-	long ms, k, speed;
+	uint64_t k;
+	long ms;
 
 	ms = (finish.tv_sec - start.tv_sec) * 1000 +
 	     (finish.tv_usec - start.tv_usec) / 1000;
-	k = goodebcnt * mtd->erasesize / 1024;
-	speed = (k * 1000) / ms;
-	return speed;
-}
-
-static int scan_for_bad_eraseblocks(void)
-{
-	int i, bad = 0;
-
-	bbt = kzalloc(ebcnt, GFP_KERNEL);
-	if (!bbt) {
-		printk(PRINT_PREF "error: cannot allocate memory\n");
-		return -ENOMEM;
-	}
-
-	/* NOR flash does not implement block_isbad */
-	if (mtd->block_isbad == NULL)
-		goto out;
-
-	printk(PRINT_PREF "scanning for bad eraseblocks\n");
-	for (i = 0; i < ebcnt; ++i) {
-		bbt[i] = is_block_bad(i) ? 1 : 0;
-		if (bbt[i])
-			bad += 1;
-		cond_resched();
-	}
-	printk(PRINT_PREF "scanned %d eraseblocks, %d are bad\n", i, bad);
-out:
-	goodebcnt = ebcnt - bad;
-	return 0;
+	if (ms == 0)
+		return 0;
+	k = goodebcnt * (mtd->erasesize / 1024) * 1000;
+	do_div(k, ms);
+	return k;
 }
 
 static int __init mtd_speedtest_init(void)
 {
-	int err, i;
+	int err, i, blocks, j, k;
 	long speed;
 	uint64_t tmp;
 
 	printk(KERN_INFO "\n");
 	printk(KERN_INFO "=================================================\n");
-	printk(PRINT_PREF "MTD device: %d\n", dev);
+
+	if (dev < 0) {
+		pr_info("Please specify a valid mtd-device via module parameter\n");
+		pr_crit("CAREFUL: This test wipes all data on the specified MTD device!\n");
+		return -EINVAL;
+	}
+
+	if (count)
+		pr_info("MTD device: %d    count: %d\n", dev, count);
+	else
+		pr_info("MTD device: %d\n", dev);
 
 	mtd = get_mtd_device(NULL, dev);
 	if (IS_ERR(mtd)) {
 		err = PTR_ERR(mtd);
-		printk(PRINT_PREF "error: cannot get MTD device\n");
+		pr_err("error: cannot get MTD device\n");
 		return err;
 	}
 
 	if (mtd->writesize == 1) {
-		printk(PRINT_PREF "not NAND flash, assume page size is 512 "
+		pr_info("not NAND flash, assume page size is 512 "
 		       "bytes.\n");
 		pgsize = 512;
 	} else
@@ -347,32 +229,39 @@ static int __init mtd_speedtest_init(void)
 	ebcnt = tmp;
 	pgcnt = mtd->erasesize / pgsize;
 
-	printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
+	pr_info("MTD device size %llu, eraseblock size %u, "
 	       "page size %u, count of eraseblocks %u, pages per "
 	       "eraseblock %u, OOB size %u\n",
 	       (unsigned long long)mtd->size, mtd->erasesize,
 	       pgsize, ebcnt, pgcnt, mtd->oobsize);
 
+	if (count > 0 && count < ebcnt)
+		ebcnt = count;
+
 	err = -ENOMEM;
 	iobuf = kmalloc(mtd->erasesize, GFP_KERNEL);
-	if (!iobuf) {
-		printk(PRINT_PREF "error: cannot allocate memory\n");
+	if (!iobuf)
 		goto out;
-	}
 
-	simple_srand(1);
-	set_random_data(iobuf, mtd->erasesize);
+	prandom_bytes(iobuf, mtd->erasesize);
 
-	err = scan_for_bad_eraseblocks();
+	bbt = kzalloc(ebcnt, GFP_KERNEL);
+	if (!bbt)
+		goto out;
+	err = mtdtest_scan_for_bad_eraseblocks(mtd, bbt, 0, ebcnt);
 	if (err)
 		goto out;
+	for (i = 0; i < ebcnt; i++) {
+		if (!bbt[i])
+			goodebcnt++;
+	}
 
-	err = erase_whole_device();
+	err = mtdtest_erase_good_eraseblocks(mtd, bbt, 0, ebcnt);
 	if (err)
 		goto out;
 
 	/* Write all eraseblocks, 1 eraseblock at a time */
-	printk(PRINT_PREF "testing eraseblock write speed\n");
+	pr_info("testing eraseblock write speed\n");
 	start_timing();
 	for (i = 0; i < ebcnt; ++i) {
 		if (bbt[i])
@@ -384,10 +273,10 @@ static int __init mtd_speedtest_init(void)
 	}
 	stop_timing();
 	speed = calc_speed();
-	printk(PRINT_PREF "eraseblock write speed is %ld KiB/s\n", speed);
+	pr_info("eraseblock write speed is %ld KiB/s\n", speed);
 
 	/* Read all eraseblocks, 1 eraseblock at a time */
-	printk(PRINT_PREF "testing eraseblock read speed\n");
+	pr_info("testing eraseblock read speed\n");
 	start_timing();
 	for (i = 0; i < ebcnt; ++i) {
 		if (bbt[i])
@@ -399,14 +288,14 @@ static int __init mtd_speedtest_init(void)
 	}
 	stop_timing();
 	speed = calc_speed();
-	printk(PRINT_PREF "eraseblock read speed is %ld KiB/s\n", speed);
+	pr_info("eraseblock read speed is %ld KiB/s\n", speed);
 
-	err = erase_whole_device();
+	err = mtdtest_erase_good_eraseblocks(mtd, bbt, 0, ebcnt);
 	if (err)
 		goto out;
 
 	/* Write all eraseblocks, 1 page at a time */
-	printk(PRINT_PREF "testing page write speed\n");
+	pr_info("testing page write speed\n");
 	start_timing();
 	for (i = 0; i < ebcnt; ++i) {
 		if (bbt[i])
@@ -418,10 +307,10 @@ static int __init mtd_speedtest_init(void)
 	}
 	stop_timing();
 	speed = calc_speed();
-	printk(PRINT_PREF "page write speed is %ld KiB/s\n", speed);
+	pr_info("page write speed is %ld KiB/s\n", speed);
 
 	/* Read all eraseblocks, 1 page at a time */
-	printk(PRINT_PREF "testing page read speed\n");
+	pr_info("testing page read speed\n");
 	start_timing();
 	for (i = 0; i < ebcnt; ++i) {
 		if (bbt[i])
@@ -433,14 +322,14 @@ static int __init mtd_speedtest_init(void)
 	}
 	stop_timing();
 	speed = calc_speed();
-	printk(PRINT_PREF "page read speed is %ld KiB/s\n", speed);
+	pr_info("page read speed is %ld KiB/s\n", speed);
 
-	err = erase_whole_device();
+	err = mtdtest_erase_good_eraseblocks(mtd, bbt, 0, ebcnt);
 	if (err)
 		goto out;
 
 	/* Write all eraseblocks, 2 pages at a time */
-	printk(PRINT_PREF "testing 2 page write speed\n");
+	pr_info("testing 2 page write speed\n");
 	start_timing();
 	for (i = 0; i < ebcnt; ++i) {
 		if (bbt[i])
@@ -452,10 +341,10 @@ static int __init mtd_speedtest_init(void)
 	}
 	stop_timing();
 	speed = calc_speed();
-	printk(PRINT_PREF "2 page write speed is %ld KiB/s\n", speed);
+	pr_info("2 page write speed is %ld KiB/s\n", speed);
 
 	/* Read all eraseblocks, 2 pages at a time */
-	printk(PRINT_PREF "testing 2 page read speed\n");
+	pr_info("testing 2 page read speed\n");
 	start_timing();
 	for (i = 0; i < ebcnt; ++i) {
 		if (bbt[i])
@@ -467,30 +356,50 @@ static int __init mtd_speedtest_init(void)
 	}
 	stop_timing();
 	speed = calc_speed();
-	printk(PRINT_PREF "2 page read speed is %ld KiB/s\n", speed);
+	pr_info("2 page read speed is %ld KiB/s\n", speed);
 
 	/* Erase all eraseblocks */
-	printk(PRINT_PREF "Testing erase speed\n");
+	pr_info("Testing erase speed\n");
 	start_timing();
-	for (i = 0; i < ebcnt; ++i) {
-		if (bbt[i])
-			continue;
-		err = erase_eraseblock(i);
-		if (err)
-			goto out;
-		cond_resched();
-	}
+	err = mtdtest_erase_good_eraseblocks(mtd, bbt, 0, ebcnt);
+	if (err)
+		goto out;
 	stop_timing();
 	speed = calc_speed();
-	printk(PRINT_PREF "erase speed is %ld KiB/s\n", speed);
-
-	printk(PRINT_PREF "finished\n");
+	pr_info("erase speed is %ld KiB/s\n", speed);
+
+	/* Multi-block erase all eraseblocks */
+	for (k = 1; k < 7; k++) {
+		blocks = 1 << k;
+		pr_info("Testing %dx multi-block erase speed\n",
+		       blocks);
+		start_timing();
+		for (i = 0; i < ebcnt; ) {
+			for (j = 0; j < blocks && (i + j) < ebcnt; j++)
+				if (bbt[i + j])
+					break;
+			if (j < 1) {
+				i++;
+				continue;
+			}
+			err = multiblock_erase(i, j);
+			if (err)
+				goto out;
+			cond_resched();
+			i += j;
+		}
+		stop_timing();
+		speed = calc_speed();
+		pr_info("%dx multi-block erase speed is %ld KiB/s\n",
+		       blocks, speed);
+	}
+	pr_info("finished\n");
 out:
 	kfree(iobuf);
 	kfree(bbt);
 	put_mtd_device(mtd);
 	if (err)
-		printk(PRINT_PREF "error %d occurred\n", err);
+		pr_info("error %d occurred\n", err);
 	printk(KERN_INFO "=================================================\n");
 	return err;
 }
diff --git a/drivers/mtd/tests/mtd_stresstest.c b/drivers/mtd/tests/stresstest.c
index 531625fc925..c9d42cc2df1 100644
--- a/drivers/mtd/tests/mtd_stresstest.c
+++ b/drivers/mtd/tests/stresstest.c
@@ -19,6 +19,8 @@
  * Author: Adrian Hunter <ext-adrian.hunter@nokia.com>
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
@@ -27,10 +29,11 @@
 #include <linux/slab.h>
 #include <linux/sched.h>
 #include <linux/vmalloc.h>
+#include <linux/random.h>
 
-#define PRINT_PREF KERN_INFO "mtd_stresstest: "
+#include "mtd_test.h"
 
-static int dev;
+static int dev = -EINVAL;
 module_param(dev, int, S_IRUGO);
 MODULE_PARM_DESC(dev, "MTD device number to use");
 
@@ -48,28 +51,13 @@ static int pgsize;
 static int bufsize;
 static int ebcnt;
 static int pgcnt;
-static unsigned long next = 1;
-
-static inline unsigned int simple_rand(void)
-{
-	next = next * 1103515245 + 12345;
-	return (unsigned int)((next / 65536) % 32768);
-}
-
-static inline void simple_srand(unsigned long seed)
-{
-	next = seed;
-}
 
 static int rand_eb(void)
 {
-	int eb;
+	unsigned int eb;
 
 again:
-	if (ebcnt < 32768)
-		eb = simple_rand();
-	else
-		eb = (simple_rand() << 15) | simple_rand();
+	eb = prandom_u32();
 	/* Read or write up 2 eraseblocks at a time - hence 'ebcnt - 1' */
 	eb %= (ebcnt - 1);
 	if (bbt[eb])
@@ -79,71 +67,27 @@ again:
 
 static int rand_offs(void)
 {
-	int offs;
+	unsigned int offs;
 
-	if (bufsize < 32768)
-		offs = simple_rand();
-	else
-		offs = (simple_rand() << 15) | simple_rand();
+	offs = prandom_u32();
 	offs %= bufsize;
 	return offs;
 }
 
 static int rand_len(int offs)
 {
-	int len;
+	unsigned int len;
 
-	if (bufsize < 32768)
-		len = simple_rand();
-	else
-		len = (simple_rand() << 15) | simple_rand();
+	len = prandom_u32();
 	len %= (bufsize - offs);
 	return len;
 }
 
-static int erase_eraseblock(int ebnum)
-{
-	int err;
-	struct erase_info ei;
-	loff_t addr = ebnum * mtd->erasesize;
-
-	memset(&ei, 0, sizeof(struct erase_info));
-	ei.mtd  = mtd;
-	ei.addr = addr;
-	ei.len  = mtd->erasesize;
-
-	err = mtd->erase(mtd, &ei);
-	if (unlikely(err)) {
-		printk(PRINT_PREF "error %d while erasing EB %d\n", err, ebnum);
-		return err;
-	}
-
-	if (unlikely(ei.state == MTD_ERASE_FAILED)) {
-		printk(PRINT_PREF "some erase error occurred at EB %d\n",
-		       ebnum);
-		return -EIO;
-	}
-
-	return 0;
-}
-
-static int is_block_bad(int ebnum)
-{
-	loff_t addr = ebnum * mtd->erasesize;
-	int ret;
-
-	ret = mtd->block_isbad(mtd, addr);
-	if (ret)
-		printk(PRINT_PREF "block %d is bad\n", ebnum);
-	return ret;
-}
-
 static int do_read(void)
 {
-	size_t read = 0;
 	int eb = rand_eb();
 	int offs = rand_offs();
-	int len = rand_len(offs), err;
+	int len = rand_len(offs);
 	loff_t addr;
 
 	if (bbt[eb + 1]) {
@@ -153,28 +97,17 @@ static int do_read(void)
 			len = mtd->erasesize - offs;
 	}
 	addr = eb * mtd->erasesize + offs;
-	err = mtd->read(mtd, addr, len, &read, readbuf);
-	if (err == -EUCLEAN)
-		err = 0;
-	if (unlikely(err || read != len)) {
-		printk(PRINT_PREF "error: read failed at 0x%llx\n",
-		       (long long)addr);
-		if (!err)
-			err = -EINVAL;
-		return err;
-	}
-	return 0;
+	return mtdtest_read(mtd, addr, len, readbuf);
 }
 
 static int do_write(void)
 {
 	int eb = rand_eb(), offs, err, len;
-	size_t written = 0;
 	loff_t addr;
 
 	offs = offsets[eb];
 	if (offs >= mtd->erasesize) {
-		err = erase_eraseblock(eb);
+		err = mtdtest_erase_eraseblock(mtd, eb);
 		if (err)
 			return err;
 		offs = offsets[eb] = 0;
@@ -185,21 +118,16 @@ static int do_write(void)
 		if (bbt[eb + 1])
 			len = mtd->erasesize - offs;
 		else {
-			err = erase_eraseblock(eb + 1);
+			err = mtdtest_erase_eraseblock(mtd, eb + 1);
 			if (err)
 				return err;
 			offsets[eb + 1] = 0;
 		}
 	}
 	addr = eb * mtd->erasesize + offs;
-	err = mtd->write(mtd, addr, len, &written, writebuf);
-	if (unlikely(err || written != len)) {
-		printk(PRINT_PREF "error: write failed at 0x%llx\n",
-		       (long long)addr);
-		if (!err)
-			err = -EINVAL;
+	err = mtdtest_write(mtd, addr, len, writebuf);
+	if (unlikely(err))
 		return err;
-	}
 	offs += len;
 	while (offs > mtd->erasesize) {
 		offsets[eb++] = mtd->erasesize;
@@ -211,37 +139,12 @@ static int do_write(void)
 
 static int do_operation(void)
 {
-	if (simple_rand() & 1)
+	if (prandom_u32() & 1)
 		return do_read();
 	else
 		return do_write();
 }
 
-static int scan_for_bad_eraseblocks(void)
-{
-	int i, bad = 0;
-
-	bbt = kzalloc(ebcnt, GFP_KERNEL);
-	if (!bbt) {
-		printk(PRINT_PREF "error: cannot allocate memory\n");
-		return -ENOMEM;
-	}
-
-	/* NOR flash does not implement block_isbad */
-	if (mtd->block_isbad == NULL)
-		return 0;
-
-	printk(PRINT_PREF "scanning for bad eraseblocks\n");
-	for (i = 0; i < ebcnt; ++i) {
-		bbt[i] = is_block_bad(i) ? 1 : 0;
-		if (bbt[i])
-			bad += 1;
-		cond_resched();
-	}
-	printk(PRINT_PREF "scanned %d eraseblocks, %d are bad\n", i, bad);
-	return 0;
-}
-
 static int __init mtd_stresstest_init(void)
 {
 	int err;
@@ -250,17 +153,24 @@ static int __init mtd_stresstest_init(void)
 
 	printk(KERN_INFO "\n");
 	printk(KERN_INFO "=================================================\n");
-	printk(PRINT_PREF "MTD device: %d\n", dev);
+
+	if (dev < 0) {
+		pr_info("Please specify a valid mtd-device via module parameter\n");
+		pr_crit("CAREFUL: This test wipes all data on the specified MTD device!\n");
+		return -EINVAL;
+	}
+
+	pr_info("MTD device: %d\n", dev);
 
 	mtd = get_mtd_device(NULL, dev);
 	if (IS_ERR(mtd)) {
 		err = PTR_ERR(mtd);
-		printk(PRINT_PREF "error: cannot get MTD device\n");
+		pr_err("error: cannot get MTD device\n");
 		return err;
 	}
 
 	if (mtd->writesize == 1) {
-		printk(PRINT_PREF "not NAND flash, assume page size is 512 "
+		pr_info("not NAND flash, assume page size is 512 "
 		       "bytes.\n");
 		pgsize = 512;
 	} else
@@ -271,12 +181,18 @@ static int __init mtd_stresstest_init(void)
 	ebcnt = tmp;
 	pgcnt = mtd->erasesize / pgsize;
 
-	printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
+	pr_info("MTD device size %llu, eraseblock size %u, "
 	       "page size %u, count of eraseblocks %u, pages per "
 	       "eraseblock %u, OOB size %u\n",
 	       (unsigned long long)mtd->size, mtd->erasesize,
 	       pgsize, ebcnt, pgcnt, mtd->oobsize);
 
+	if (ebcnt < 2) {
+		pr_err("error: need at least 2 eraseblocks\n");
+		err = -ENOSPC;
+		goto out_put_mtd;
+	}
+
 	/* Read or write up 2 eraseblocks at a time */
 	bufsize = mtd->erasesize * 2;
 
@@ -284,40 +200,40 @@ static int __init mtd_stresstest_init(void)
 	readbuf = vmalloc(bufsize);
 	writebuf = vmalloc(bufsize);
 	offsets = kmalloc(ebcnt * sizeof(int), GFP_KERNEL);
-	if (!readbuf || !writebuf || !offsets) {
-		printk(PRINT_PREF "error: cannot allocate memory\n");
+	if (!readbuf || !writebuf || !offsets)
 		goto out;
-	}
 	for (i = 0; i < ebcnt; i++)
 		offsets[i] = mtd->erasesize;
-	simple_srand(current->pid);
-	for (i = 0; i < bufsize; i++)
-		writebuf[i] = simple_rand();
+	prandom_bytes(writebuf, bufsize);
 
-	err = scan_for_bad_eraseblocks();
+	bbt = kzalloc(ebcnt, GFP_KERNEL);
+	if (!bbt)
+		goto out;
+	err = mtdtest_scan_for_bad_eraseblocks(mtd, bbt, 0, ebcnt);
 	if (err)
 		goto out;
 
 	/* Do operations */
-	printk(PRINT_PREF "doing operations\n");
+	pr_info("doing operations\n");
 	for (op = 0; op < count; op++) {
 		if ((op & 1023) == 0)
-			printk(PRINT_PREF "%d operations done\n", op);
+			pr_info("%d operations done\n", op);
 		err = do_operation();
 		if (err)
 			goto out;
 		cond_resched();
 	}
-	printk(PRINT_PREF "finished, %d operations done\n", op);
+	pr_info("finished, %d operations done\n", op);
 
 out:
 	kfree(offsets);
 	kfree(bbt);
 	vfree(writebuf);
 	vfree(readbuf);
+out_put_mtd:
 	put_mtd_device(mtd);
 	if (err)
-		printk(PRINT_PREF "error %d occurred\n", err);
+		pr_info("error %d occurred\n", err);
 	printk(KERN_INFO "=================================================\n");
 	return err;
 }
diff --git a/drivers/mtd/tests/mtd_subpagetest.c b/drivers/mtd/tests/subpagetest.c
index 11204e8aab5..a876371ad41 100644
--- a/drivers/mtd/tests/mtd_subpagetest.c
+++ b/drivers/mtd/tests/subpagetest.c
@@ -19,6 +19,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
@@ -26,10 +28,11 @@
 #include <linux/mtd/mtd.h>
 #include <linux/slab.h>
 #include <linux/sched.h>
+#include <linux/random.h>
 
-#define PRINT_PREF KERN_INFO "mtd_subpagetest: "
+#include "mtd_test.h"
 
-static int dev;
+static int dev = -EINVAL;
 module_param(dev, int, S_IRUGO);
 MODULE_PARM_DESC(dev, "MTD device number to use");
 
@@ -43,104 +46,41 @@ static int bufsize;
 static int ebcnt;
 static int pgcnt;
 static int errcnt;
-static unsigned long next = 1;
-
-static inline unsigned int simple_rand(void)
-{
-	next = next * 1103515245 + 12345;
-	return (unsigned int)((next / 65536) % 32768);
-}
-
-static inline void simple_srand(unsigned long seed)
-{
-	next = seed;
-}
-
-static void set_random_data(unsigned char *buf, size_t len)
-{
-	size_t i;
-
-	for (i = 0; i < len; ++i)
-		buf[i] = simple_rand();
-}
+static struct rnd_state rnd_state;
 
 static inline void clear_data(unsigned char *buf, size_t len)
 {
 	memset(buf, 0, len);
 }
 
-static int erase_eraseblock(int ebnum)
-{
-	int err;
-	struct erase_info ei;
-	loff_t addr = ebnum * mtd->erasesize;
-
-	memset(&ei, 0, sizeof(struct erase_info));
-	ei.mtd  = mtd;
-	ei.addr = addr;
-	ei.len  = mtd->erasesize;
-
-	err = mtd->erase(mtd, &ei);
-	if (err) {
-		printk(PRINT_PREF "error %d while erasing EB %d\n", err, ebnum);
-		return err;
-	}
-
-	if (ei.state == MTD_ERASE_FAILED) {
-		printk(PRINT_PREF "some erase error occurred at EB %d\n",
-		       ebnum);
-		return -EIO;
-	}
-
-	return 0;
-}
-
-static int erase_whole_device(void)
-{
-	int err;
-	unsigned int i;
-
-	printk(PRINT_PREF "erasing whole device\n");
-	for (i = 0; i < ebcnt; ++i) {
-		if (bbt[i])
-			continue;
-		err = erase_eraseblock(i);
-		if (err)
-			return err;
-		cond_resched();
-	}
-	printk(PRINT_PREF "erased %u eraseblocks\n", i);
-	return 0;
-}
-
 static int write_eraseblock(int ebnum)
 {
-	size_t written = 0;
+	size_t written;
 	int err = 0;
 	loff_t addr = ebnum * mtd->erasesize;
 
-	set_random_data(writebuf, subpgsize);
-	err = mtd->write(mtd, addr, subpgsize, &written, writebuf);
+	prandom_bytes_state(&rnd_state, writebuf, subpgsize);
+	err = mtd_write(mtd, addr, subpgsize, &written, writebuf);
 	if (unlikely(err || written != subpgsize)) {
-		printk(PRINT_PREF "error: write failed at %#llx\n",
+		pr_err("error: write failed at %#llx\n",
 		       (long long)addr);
 		if (written != subpgsize) {
-			printk(PRINT_PREF "  write size: %#x\n", subpgsize);
-			printk(PRINT_PREF "  written: %#zx\n", written);
+			pr_err("  write size: %#x\n", subpgsize);
+			pr_err("  written: %#zx\n", written);
 		}
 		return err ? err : -1;
 	}
 
 	addr += subpgsize;
 
-	set_random_data(writebuf, subpgsize);
-	err = mtd->write(mtd, addr, subpgsize, &written, writebuf);
+	prandom_bytes_state(&rnd_state, writebuf, subpgsize);
+	err = mtd_write(mtd, addr, subpgsize, &written, writebuf);
 	if (unlikely(err || written != subpgsize)) {
-		printk(PRINT_PREF "error: write failed at %#llx\n",
+		pr_err("error: write failed at %#llx\n",
 		       (long long)addr);
 		if (written != subpgsize) {
-			printk(PRINT_PREF "  write size: %#x\n", subpgsize);
-			printk(PRINT_PREF "  written: %#zx\n", written);
+			pr_err("  write size: %#x\n", subpgsize);
+			pr_err("  written: %#zx\n", written);
 		}
 		return err ? err : -1;
 	}
@@ -150,22 +90,22 @@ static int write_eraseblock(int ebnum)
 
 static int write_eraseblock2(int ebnum)
 {
-	size_t written = 0;
+	size_t written;
 	int err = 0, k;
 	loff_t addr = ebnum * mtd->erasesize;
 
 	for (k = 1; k < 33; ++k) {
 		if (addr + (subpgsize * k) > (ebnum + 1) * mtd->erasesize)
 			break;
-		set_random_data(writebuf, subpgsize * k);
-		err = mtd->write(mtd, addr, subpgsize * k, &written, writebuf);
+		prandom_bytes_state(&rnd_state, writebuf, subpgsize * k);
+		err = mtd_write(mtd, addr, subpgsize * k, &written, writebuf);
 		if (unlikely(err || written != subpgsize * k)) {
-			printk(PRINT_PREF "error: write failed at %#llx\n",
+			pr_err("error: write failed at %#llx\n",
 			       (long long)addr);
 			if (written != subpgsize) {
-				printk(PRINT_PREF "  write size: %#x\n",
+				pr_err("  write size: %#x\n",
 				       subpgsize * k);
-				printk(PRINT_PREF "  written: %#08zx\n",
+				pr_err("  written: %#08zx\n",
 				       written);
 			}
 			return err ? err : -1;
@@ -189,61 +129,59 @@ static void print_subpage(unsigned char *p)
 
 static int verify_eraseblock(int ebnum)
 {
-	size_t read = 0;
+	size_t read;
 	int err = 0;
 	loff_t addr = ebnum * mtd->erasesize;
 
-	set_random_data(writebuf, subpgsize);
+	prandom_bytes_state(&rnd_state, writebuf, subpgsize);
 	clear_data(readbuf, subpgsize);
-	read = 0;
-	err = mtd->read(mtd, addr, subpgsize, &read, readbuf);
+	err = mtd_read(mtd, addr, subpgsize, &read, readbuf);
 	if (unlikely(err || read != subpgsize)) {
-		if (err == -EUCLEAN && read == subpgsize) {
-			printk(PRINT_PREF "ECC correction at %#llx\n",
+		if (mtd_is_bitflip(err) && read == subpgsize) {
+			pr_info("ECC correction at %#llx\n",
 			       (long long)addr);
 			err = 0;
 		} else {
-			printk(PRINT_PREF "error: read failed at %#llx\n",
+			pr_err("error: read failed at %#llx\n",
 			       (long long)addr);
 			return err ? err : -1;
 		}
 	}
 	if (unlikely(memcmp(readbuf, writebuf, subpgsize))) {
-		printk(PRINT_PREF "error: verify failed at %#llx\n",
+		pr_err("error: verify failed at %#llx\n",
 		       (long long)addr);
-		printk(PRINT_PREF "------------- written----------------\n");
+		pr_info("------------- written----------------\n");
 		print_subpage(writebuf);
-		printk(PRINT_PREF "------------- read ------------------\n");
+		pr_info("------------- read ------------------\n");
 		print_subpage(readbuf);
-		printk(PRINT_PREF "-------------------------------------\n");
+		pr_info("-------------------------------------\n");
 		errcnt += 1;
 	}
 
 	addr += subpgsize;
 
-	set_random_data(writebuf, subpgsize);
+	prandom_bytes_state(&rnd_state, writebuf, subpgsize);
 	clear_data(readbuf, subpgsize);
-	read = 0;
-	err = mtd->read(mtd, addr, subpgsize, &read, readbuf);
+	err = mtd_read(mtd, addr, subpgsize, &read, readbuf);
 	if (unlikely(err || read != subpgsize)) {
-		if (err == -EUCLEAN && read == subpgsize) {
-			printk(PRINT_PREF "ECC correction at %#llx\n",
+		if (mtd_is_bitflip(err) && read == subpgsize) {
+			pr_info("ECC correction at %#llx\n",
 			       (long long)addr);
 			err = 0;
 		} else {
-			printk(PRINT_PREF "error: read failed at %#llx\n",
+			pr_err("error: read failed at %#llx\n",
 			       (long long)addr);
 			return err ? err : -1;
 		}
 	}
 	if (unlikely(memcmp(readbuf, writebuf, subpgsize))) {
-		printk(PRINT_PREF "error: verify failed at %#llx\n",
+		pr_info("error: verify failed at %#llx\n",
 		       (long long)addr);
-		printk(PRINT_PREF "------------- written----------------\n");
+		pr_info("------------- written----------------\n");
 		print_subpage(writebuf);
-		printk(PRINT_PREF "------------- read ------------------\n");
+		pr_info("------------- read ------------------\n");
 		print_subpage(readbuf);
-		printk(PRINT_PREF "-------------------------------------\n");
+		pr_info("-------------------------------------\n");
 		errcnt += 1;
 	}
 
@@ -252,30 +190,29 @@ static int verify_eraseblock(int ebnum)
 
 static int verify_eraseblock2(int ebnum)
 {
-	size_t read = 0;
+	size_t read;
 	int err = 0, k;
 	loff_t addr = ebnum * mtd->erasesize;
 
 	for (k = 1; k < 33; ++k) {
 		if (addr + (subpgsize * k) > (ebnum + 1) * mtd->erasesize)
 			break;
-		set_random_data(writebuf, subpgsize * k);
+		prandom_bytes_state(&rnd_state, writebuf, subpgsize * k);
 		clear_data(readbuf, subpgsize * k);
-		read = 0;
-		err = mtd->read(mtd, addr, subpgsize * k, &read, readbuf);
+		err = mtd_read(mtd, addr, subpgsize * k, &read, readbuf);
 		if (unlikely(err || read != subpgsize * k)) {
-			if (err == -EUCLEAN && read == subpgsize * k) {
-				printk(PRINT_PREF "ECC correction at %#llx\n",
+			if (mtd_is_bitflip(err) && read == subpgsize * k) {
+				pr_info("ECC correction at %#llx\n",
 				       (long long)addr);
 				err = 0;
 			} else {
-				printk(PRINT_PREF "error: read failed at "
+				pr_err("error: read failed at "
 				       "%#llx\n", (long long)addr);
 				return err ? err : -1;
 			}
 		}
 		if (unlikely(memcmp(readbuf, writebuf, subpgsize * k))) {
-			printk(PRINT_PREF "error: verify failed at %#llx\n",
+			pr_err("error: verify failed at %#llx\n",
 			       (long long)addr);
 			errcnt += 1;
 		}
@@ -288,28 +225,27 @@ static int verify_eraseblock2(int ebnum)
 static int verify_eraseblock_ff(int ebnum)
 {
 	uint32_t j;
-	size_t read = 0;
+	size_t read;
 	int err = 0;
 	loff_t addr = ebnum * mtd->erasesize;
 
 	memset(writebuf, 0xff, subpgsize);
 	for (j = 0; j < mtd->erasesize / subpgsize; ++j) {
 		clear_data(readbuf, subpgsize);
-		read = 0;
-		err = mtd->read(mtd, addr, subpgsize, &read, readbuf);
+		err = mtd_read(mtd, addr, subpgsize, &read, readbuf);
 		if (unlikely(err || read != subpgsize)) {
-			if (err == -EUCLEAN && read == subpgsize) {
-				printk(PRINT_PREF "ECC correction at %#llx\n",
+			if (mtd_is_bitflip(err) && read == subpgsize) {
+				pr_info("ECC correction at %#llx\n",
 				       (long long)addr);
 				err = 0;
 			} else {
-				printk(PRINT_PREF "error: read failed at "
+				pr_err("error: read failed at "
 				       "%#llx\n", (long long)addr);
 				return err ? err : -1;
 			}
 		}
 		if (unlikely(memcmp(readbuf, writebuf, subpgsize))) {
-			printk(PRINT_PREF "error: verify 0xff failed at "
+			pr_err("error: verify 0xff failed at "
 			       "%#llx\n", (long long)addr);
 			errcnt += 1;
 		}
@@ -324,7 +260,7 @@ static int verify_all_eraseblocks_ff(void)
 	int err;
 	unsigned int i;
 
-	printk(PRINT_PREF "verifying all eraseblocks for 0xff\n");
+	pr_info("verifying all eraseblocks for 0xff\n");
 	for (i = 0; i < ebcnt; ++i) {
 		if (bbt[i])
 			continue;
@@ -332,42 +268,10 @@ static int verify_all_eraseblocks_ff(void)
 		if (err)
 			return err;
 		if (i % 256 == 0)
-			printk(PRINT_PREF "verified up to eraseblock %u\n", i);
-		cond_resched();
-	}
-	printk(PRINT_PREF "verified %u eraseblocks\n", i);
-	return 0;
-}
-
-static int is_block_bad(int ebnum)
-{
-	loff_t addr = ebnum * mtd->erasesize;
-	int ret;
-
-	ret = mtd->block_isbad(mtd, addr);
-	if (ret)
-		printk(PRINT_PREF "block %d is bad\n", ebnum);
-	return ret;
-}
-
-static int scan_for_bad_eraseblocks(void)
-{
-	int i, bad = 0;
-
-	bbt = kzalloc(ebcnt, GFP_KERNEL);
-	if (!bbt) {
-		printk(PRINT_PREF "error: cannot allocate memory\n");
-		return -ENOMEM;
-	}
-
-	printk(PRINT_PREF "scanning for bad eraseblocks\n");
-	for (i = 0; i < ebcnt; ++i) {
-		bbt[i] = is_block_bad(i) ? 1 : 0;
-		if (bbt[i])
-			bad += 1;
+			pr_info("verified up to eraseblock %u\n", i);
 		cond_resched();
 	}
-	printk(PRINT_PREF "scanned %d eraseblocks, %d are bad\n", i, bad);
+	pr_info("verified %u eraseblocks\n", i);
 	return 0;
 }
 
@@ -379,22 +283,34 @@ static int __init mtd_subpagetest_init(void)
 
 	printk(KERN_INFO "\n");
 	printk(KERN_INFO "=================================================\n");
-	printk(PRINT_PREF "MTD device: %d\n", dev);
+
+	if (dev < 0) {
+		pr_info("Please specify a valid mtd-device via module parameter\n");
+		pr_crit("CAREFUL: This test wipes all data on the specified MTD device!\n");
+		return -EINVAL;
+	}
+
+	pr_info("MTD device: %d\n", dev);
 
 	mtd = get_mtd_device(NULL, dev);
 	if (IS_ERR(mtd)) {
 		err = PTR_ERR(mtd);
-		printk(PRINT_PREF "error: cannot get MTD device\n");
+		pr_err("error: cannot get MTD device\n");
 		return err;
 	}
 
-	if (mtd->type != MTD_NANDFLASH) {
-		printk(PRINT_PREF "this test requires NAND flash\n");
+	if (!mtd_type_is_nand(mtd)) {
+		pr_info("this test requires NAND flash\n");
 		goto out;
 	}
 
 	subpgsize = mtd->writesize >> mtd->subpage_sft;
-	printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
+	tmp = mtd->size;
+	do_div(tmp, mtd->erasesize);
+	ebcnt = tmp;
+	pgcnt = mtd->erasesize / mtd->writesize;
+
+	pr_info("MTD device size %llu, eraseblock size %u, "
 	       "page size %u, subpage size %u, count of eraseblocks %u, "
 	       "pages per eraseblock %u, OOB size %u\n",
 	       (unsigned long long)mtd->size, mtd->erasesize,
@@ -403,31 +319,25 @@ static int __init mtd_subpagetest_init(void)
 	err = -ENOMEM;
 	bufsize = subpgsize * 32;
 	writebuf = kmalloc(bufsize, GFP_KERNEL);
-	if (!writebuf) {
-		printk(PRINT_PREF "error: cannot allocate memory\n");
+	if (!writebuf)
 		goto out;
-	}
 	readbuf = kmalloc(bufsize, GFP_KERNEL);
-	if (!readbuf) {
-		printk(PRINT_PREF "error: cannot allocate memory\n");
+	if (!readbuf)
+		goto out;
+	bbt = kzalloc(ebcnt, GFP_KERNEL);
+	if (!bbt)
 		goto out;
-	}
-
-	tmp = mtd->size;
-	do_div(tmp, mtd->erasesize);
-	ebcnt = tmp;
-	pgcnt = mtd->erasesize / mtd->writesize;
 
-	err = scan_for_bad_eraseblocks();
+	err = mtdtest_scan_for_bad_eraseblocks(mtd, bbt, 0, ebcnt);
 	if (err)
 		goto out;
 
-	err = erase_whole_device();
+	err = mtdtest_erase_good_eraseblocks(mtd, bbt, 0, ebcnt);
 	if (err)
 		goto out;
 
-	printk(PRINT_PREF "writing whole device\n");
-	simple_srand(1);
+	pr_info("writing whole device\n");
+	prandom_seed_state(&rnd_state, 1);
 	for (i = 0; i < ebcnt; ++i) {
 		if (bbt[i])
 			continue;
@@ -435,13 +345,13 @@ static int __init mtd_subpagetest_init(void)
 		if (unlikely(err))
 			goto out;
 		if (i % 256 == 0)
-			printk(PRINT_PREF "written up to eraseblock %u\n", i);
+			pr_info("written up to eraseblock %u\n", i);
 		cond_resched();
 	}
-	printk(PRINT_PREF "written %u eraseblocks\n", i);
+	pr_info("written %u eraseblocks\n", i);
 
-	simple_srand(1);
-	printk(PRINT_PREF "verifying all eraseblocks\n");
+	prandom_seed_state(&rnd_state, 1);
+	pr_info("verifying all eraseblocks\n");
 	for (i = 0; i < ebcnt; ++i) {
 		if (bbt[i])
 			continue;
@@ -449,12 +359,12 @@ static int __init mtd_subpagetest_init(void)
 		if (unlikely(err))
 			goto out;
 		if (i % 256 == 0)
-			printk(PRINT_PREF "verified up to eraseblock %u\n", i);
+			pr_info("verified up to eraseblock %u\n", i);
 		cond_resched();
 	}
-	printk(PRINT_PREF "verified %u eraseblocks\n", i);
+	pr_info("verified %u eraseblocks\n", i);
 
-	err = erase_whole_device();
+	err = mtdtest_erase_good_eraseblocks(mtd, bbt, 0, ebcnt);
 	if (err)
 		goto out;
 
@@ -463,8 +373,8 @@ static int __init mtd_subpagetest_init(void)
 		goto out;
 
 	/* Write all eraseblocks */
-	simple_srand(3);
-	printk(PRINT_PREF "writing whole device\n");
+	prandom_seed_state(&rnd_state, 3);
+	pr_info("writing whole device\n");
 	for (i = 0; i < ebcnt; ++i) {
 		if (bbt[i])
 			continue;
@@ -472,14 +382,14 @@ static int __init mtd_subpagetest_init(void)
 		if (unlikely(err))
 			goto out;
 		if (i % 256 == 0)
-			printk(PRINT_PREF "written up to eraseblock %u\n", i);
+			pr_info("written up to eraseblock %u\n", i);
 		cond_resched();
 	}
-	printk(PRINT_PREF "written %u eraseblocks\n", i);
+	pr_info("written %u eraseblocks\n", i);
 
 	/* Check all eraseblocks */
-	simple_srand(3);
-	printk(PRINT_PREF "verifying all eraseblocks\n");
+	prandom_seed_state(&rnd_state, 3);
+	pr_info("verifying all eraseblocks\n");
 	for (i = 0; i < ebcnt; ++i) {
 		if (bbt[i])
 			continue;
@@ -487,12 +397,12 @@ static int __init mtd_subpagetest_init(void)
 		if (unlikely(err))
 			goto out;
 		if (i % 256 == 0)
-			printk(PRINT_PREF "verified up to eraseblock %u\n", i);
+			pr_info("verified up to eraseblock %u\n", i);
 		cond_resched();
 	}
-	printk(PRINT_PREF "verified %u eraseblocks\n", i);
+	pr_info("verified %u eraseblocks\n", i);
 
-	err = erase_whole_device();
+	err = mtdtest_erase_good_eraseblocks(mtd, bbt, 0, ebcnt);
 	if (err)
 		goto out;
 
@@ -500,7 +410,7 @@ static int __init mtd_subpagetest_init(void)
 	if (err)
 		goto out;
 
-	printk(PRINT_PREF "finished with %d errors\n", errcnt);
+	pr_info("finished with %d errors\n", errcnt);
 
 out:
 	kfree(bbt);
@@ -508,7 +418,7 @@ out:
 	kfree(writebuf);
 	put_mtd_device(mtd);
 	if (err)
-		printk(PRINT_PREF "error %d occurred\n", err);
+		pr_info("error %d occurred\n", err);
 	printk(KERN_INFO "=================================================\n");
 	return err;
 }
diff --git a/drivers/mtd/tests/mtd_torturetest.c b/drivers/mtd/tests/torturetest.c
index 5c6c3d24890..eeab96973cf 100644
--- a/drivers/mtd/tests/mtd_torturetest.c
+++ b/drivers/mtd/tests/torturetest.c
@@ -23,6 +23,8 @@
  * damage caused by this program.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
@@ -30,8 +32,8 @@
 #include <linux/mtd/mtd.h>
 #include <linux/slab.h>
 #include <linux/sched.h>
+#include "mtd_test.h"
 
-#define PRINT_PREF KERN_INFO "mtd_torturetest: "
 #define RETRIES 3
 
 static int eb = 8;
@@ -46,7 +48,7 @@ static int pgcnt;
 module_param(pgcnt, int, S_IRUGO);
 MODULE_PARM_DESC(pgcnt, "number of pages per eraseblock to torture (0 => all)");
 
-static int dev;
+static int dev = -EINVAL;
 module_param(dev, int, S_IRUGO);
 MODULE_PARM_DESC(dev, "MTD device number to use");
 
@@ -92,42 +94,13 @@ static inline void stop_timing(void)
 }
 
 /*
- * Erase eraseblock number @ebnum.
- */
-static inline int erase_eraseblock(int ebnum)
-{
-	int err;
-	struct erase_info ei;
-	loff_t addr = ebnum * mtd->erasesize;
-
-	memset(&ei, 0, sizeof(struct erase_info));
-	ei.mtd  = mtd;
-	ei.addr = addr;
-	ei.len  = mtd->erasesize;
-
-	err = mtd->erase(mtd, &ei);
-	if (err) {
-		printk(PRINT_PREF "error %d while erasing EB %d\n", err, ebnum);
-		return err;
-	}
-
-	if (ei.state == MTD_ERASE_FAILED) {
-		printk(PRINT_PREF "some erase error occurred at EB %d\n",
-		       ebnum);
-		return -EIO;
-	}
-
-	return 0;
-}
-
-/*
  * Check that the contents of eraseblock number @enbum is equivalent to the
  * @buf buffer.
  */
 static inline int check_eraseblock(int ebnum, unsigned char *buf)
 {
 	int err, retries = 0;
-	size_t read = 0;
+	size_t read;
 	loff_t addr = ebnum * mtd->erasesize;
 	size_t len = mtd->erasesize;
 
@@ -137,42 +110,42 @@ static inline int check_eraseblock(int ebnum, unsigned char *buf)
 	}
 
 retry:
-	err = mtd->read(mtd, addr, len, &read, check_buf);
-	if (err == -EUCLEAN)
-		printk(PRINT_PREF "single bit flip occurred at EB %d "
+	err = mtd_read(mtd, addr, len, &read, check_buf);
+	if (mtd_is_bitflip(err))
+		pr_err("single bit flip occurred at EB %d "
 		       "MTD reported that it was fixed.\n", ebnum);
 	else if (err) {
-		printk(PRINT_PREF "error %d while reading EB %d, "
+		pr_err("error %d while reading EB %d, "
 		       "read %zd\n", err, ebnum, read);
 		return err;
 	}
 
 	if (read != len) {
-		printk(PRINT_PREF "failed to read %zd bytes from EB %d, "
+		pr_err("failed to read %zd bytes from EB %d, "
 		       "read only %zd, but no error reported\n",
 		       len, ebnum, read);
 		return -EIO;
 	}
 
 	if (memcmp(buf, check_buf, len)) {
-		printk(PRINT_PREF "read wrong data from EB %d\n", ebnum);
+		pr_err("read wrong data from EB %d\n", ebnum);
 		report_corrupt(check_buf, buf);
 
 		if (retries++ < RETRIES) {
 			/* Try read again */
 			yield();
-			printk(PRINT_PREF "re-try reading data from EB %d\n",
+			pr_info("re-try reading data from EB %d\n",
 			       ebnum);
 			goto retry;
 		} else {
-			printk(PRINT_PREF "retried %d times, still errors, "
+			pr_info("retried %d times, still errors, "
 			       "give-up\n", RETRIES);
 			return -EINVAL;
 		}
 	}
 
 	if (retries != 0)
-		printk(PRINT_PREF "only attempt number %d was OK (!!!)\n",
+		pr_info("only attempt number %d was OK (!!!)\n",
 		       retries);
 
 	return 0;
@@ -181,7 +154,7 @@ retry:
 static inline int write_pattern(int ebnum, void *buf)
 {
 	int err;
-	size_t written = 0;
+	size_t written;
 	loff_t addr = ebnum * mtd->erasesize;
 	size_t len = mtd->erasesize;
 
@@ -189,14 +162,14 @@ static inline int write_pattern(int ebnum, void *buf)
 		addr = (ebnum + 1) * mtd->erasesize - pgcnt * pgsize;
 		len = pgcnt * pgsize;
 	}
-	err = mtd->write(mtd, addr, len, &written, buf);
+	err = mtd_write(mtd, addr, len, &written, buf);
 	if (err) {
-		printk(PRINT_PREF "error %d while writing EB %d, written %zd"
+		pr_err("error %d while writing EB %d, written %zd"
 		      " bytes\n", err, ebnum, written);
 		return err;
 	}
 	if (written != len) {
-		printk(PRINT_PREF "written only %zd bytes of %zd, but no error"
+		pr_info("written only %zd bytes of %zd, but no error"
 		       " reported\n", written, len);
 		return -EIO;
 	}
@@ -207,63 +180,66 @@ static inline int write_pattern(int ebnum, void *buf)
 static int __init tort_init(void)
 {
 	int err = 0, i, infinite = !cycles_count;
-	int bad_ebs[ebcnt];
+	unsigned char *bad_ebs;
 
 	printk(KERN_INFO "\n");
 	printk(KERN_INFO "=================================================\n");
-	printk(PRINT_PREF "Warning: this program is trying to wear out your "
+	pr_info("Warning: this program is trying to wear out your "
 	       "flash, stop it if this is not wanted.\n");
-	printk(PRINT_PREF "MTD device: %d\n", dev);
-	printk(PRINT_PREF "torture %d eraseblocks (%d-%d) of mtd%d\n",
+
+	if (dev < 0) {
+		pr_info("Please specify a valid mtd-device via module parameter\n");
+		pr_crit("CAREFUL: This test wipes all data on the specified MTD device!\n");
+		return -EINVAL;
+	}
+
+	pr_info("MTD device: %d\n", dev);
+	pr_info("torture %d eraseblocks (%d-%d) of mtd%d\n",
 	       ebcnt, eb, eb + ebcnt - 1, dev);
 	if (pgcnt)
-		printk(PRINT_PREF "torturing just %d pages per eraseblock\n",
+		pr_info("torturing just %d pages per eraseblock\n",
 			pgcnt);
-	printk(PRINT_PREF "write verify %s\n", check ? "enabled" : "disabled");
+	pr_info("write verify %s\n", check ? "enabled" : "disabled");
 
 	mtd = get_mtd_device(NULL, dev);
 	if (IS_ERR(mtd)) {
 		err = PTR_ERR(mtd);
-		printk(PRINT_PREF "error: cannot get MTD device\n");
+		pr_err("error: cannot get MTD device\n");
 		return err;
 	}
 
 	if (mtd->writesize == 1) {
-		printk(PRINT_PREF "not NAND flash, assume page size is 512 "
+		pr_info("not NAND flash, assume page size is 512 "
 		       "bytes.\n");
 		pgsize = 512;
 	} else
 		pgsize = mtd->writesize;
 
 	if (pgcnt && (pgcnt > mtd->erasesize / pgsize || pgcnt < 0)) {
-		printk(PRINT_PREF "error: invalid pgcnt value %d\n", pgcnt);
+		pr_err("error: invalid pgcnt value %d\n", pgcnt);
 		goto out_mtd;
 	}
 
 	err = -ENOMEM;
 	patt_5A5 = kmalloc(mtd->erasesize, GFP_KERNEL);
-	if (!patt_5A5) {
-		printk(PRINT_PREF "error: cannot allocate memory\n");
+	if (!patt_5A5)
 		goto out_mtd;
-	}
 
 	patt_A5A = kmalloc(mtd->erasesize, GFP_KERNEL);
-	if (!patt_A5A) {
-		printk(PRINT_PREF "error: cannot allocate memory\n");
+	if (!patt_A5A)
 		goto out_patt_5A5;
-	}
 
 	patt_FF = kmalloc(mtd->erasesize, GFP_KERNEL);
-	if (!patt_FF) {
-		printk(PRINT_PREF "error: cannot allocate memory\n");
+	if (!patt_FF)
 		goto out_patt_A5A;
-	}
 
 	check_buf = kmalloc(mtd->erasesize, GFP_KERNEL);
-	if (!check_buf) {
-		printk(PRINT_PREF "error: cannot allocate memory\n");
+	if (!check_buf)
 		goto out_patt_FF;
-	}
+
+	bad_ebs = kzalloc(ebcnt, GFP_KERNEL);
+	if (!bad_ebs)
+		goto out_check_buf;
 
 	err = 0;
 
@@ -279,42 +255,16 @@ static int __init tort_init(void)
 		}
 	}
 
-	/*
-	 * Check if there is a bad eraseblock among those we are going to test.
-	 */
-	memset(&bad_ebs[0], 0, sizeof(int) * ebcnt);
-	if (mtd->block_isbad) {
-		for (i = eb; i < eb + ebcnt; i++) {
-			err = mtd->block_isbad(mtd,
-					       (loff_t)i * mtd->erasesize);
-
-			if (err < 0) {
-				printk(PRINT_PREF "block_isbad() returned %d "
-				       "for EB %d\n", err, i);
-				goto out;
-			}
-
-			if (err) {
-				printk("EB %d is bad. Skip it.\n", i);
-				bad_ebs[i - eb] = 1;
-			}
-		}
-	}
+	err = mtdtest_scan_for_bad_eraseblocks(mtd, bad_ebs, eb, ebcnt);
+	if (err)
+		goto out;
 
 	start_timing();
 	while (1) {
 		int i;
 		void *patt;
 
-		/* Erase all eraseblocks */
-		for (i = eb; i < eb + ebcnt; i++) {
-			if (bad_ebs[i - eb])
-				continue;
-			err = erase_eraseblock(i);
-			if (err)
-				goto out;
-			cond_resched();
-		}
+		mtdtest_erase_good_eraseblocks(mtd, bad_ebs, eb, ebcnt);
 
 		/* Check if the eraseblocks contain only 0xFF bytes */
 		if (check) {
@@ -323,7 +273,7 @@ static int __init tort_init(void)
 					continue;
 				err = check_eraseblock(i, patt_FF);
 				if (err) {
-					printk(PRINT_PREF "verify failed"
+					pr_info("verify failed"
 					       " for 0xFF... pattern\n");
 					goto out;
 				}
@@ -356,7 +306,7 @@ static int __init tort_init(void)
 					patt = patt_A5A;
 				err = check_eraseblock(i, patt);
 				if (err) {
-					printk(PRINT_PREF "verify failed for %s"
+					pr_info("verify failed for %s"
 					       " pattern\n",
 					       ((eb + erase_cycles) & 1) ?
 					       "0x55AA55..." : "0xAA55AA...");
@@ -374,7 +324,7 @@ static int __init tort_init(void)
 			stop_timing();
 			ms = (finish.tv_sec - start.tv_sec) * 1000 +
 			     (finish.tv_usec - start.tv_usec) / 1000;
-			printk(PRINT_PREF "%08u erase cycles done, took %lu "
+			pr_info("%08u erase cycles done, took %lu "
 			       "milliseconds (%lu seconds)\n",
 			       erase_cycles, ms, ms / 1000);
 			start_timing();
@@ -385,8 +335,10 @@ static int __init tort_init(void)
 	}
 out:
 
-	printk(PRINT_PREF "finished after %u erase cycles\n",
+	pr_info("finished after %u erase cycles\n",
 	       erase_cycles);
+	kfree(bad_ebs);
+out_check_buf:
 	kfree(check_buf);
 out_patt_FF:
 	kfree(patt_FF);
@@ -397,7 +349,7 @@ out_patt_5A5:
 out_mtd:
 	put_mtd_device(mtd);
 	if (err)
-		printk(PRINT_PREF "error %d occurred during torturing\n", err);
+		pr_info("error %d occurred during torturing\n", err);
 	printk(KERN_INFO "=================================================\n");
 	return err;
 }
@@ -435,9 +387,9 @@ static void report_corrupt(unsigned char *read, unsigned char *written)
 			       &bits) >= 0)
 			pages++;
 
-	printk(PRINT_PREF "verify fails on %d pages, %d bytes/%d bits\n",
+	pr_info("verify fails on %d pages, %d bytes/%d bits\n",
 	       pages, bytes, bits);
-	printk(PRINT_PREF "The following is a list of all differences between"
+	pr_info("The following is a list of all differences between"
 	       " what was read from flash and what was expected\n");
 
 	for (i = 0; i < check_len; i += pgsize) {
@@ -451,7 +403,7 @@ static void report_corrupt(unsigned char *read, unsigned char *written)
 		printk("-------------------------------------------------------"
 		       "----------------------------------\n");
 
-		printk(PRINT_PREF "Page %zd has %d bytes/%d bits failing verify,"
+		pr_info("Page %zd has %d bytes/%d bits failing verify,"
 		       " starting at offset 0x%x\n",
 		       (mtd->erasesize - check_len + i) / pgsize,
 		       bytes, bits, first);
diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig
index f702a163d8d..f0855ce08ed 100644
--- a/drivers/mtd/ubi/Kconfig
+++ b/drivers/mtd/ubi/Kconfig
@@ -1,9 +1,5 @@
-menu "UBI - Unsorted block images"
-	depends on MTD
-
-config MTD_UBI
-	tristate "Enable UBI"
-	depends on MTD
+menuconfig MTD_UBI
+	tristate "Enable UBI - Unsorted block images"
 	select CRC32
 	help
 	  UBI is a software layer above MTD layer which admits of LVM-like
@@ -12,11 +8,12 @@ config MTD_UBI
 	  capabilities. Please, consult the MTD web site for more details
 	  (www.linux-mtd.infradead.org).
 
+if MTD_UBI
+
 config MTD_UBI_WL_THRESHOLD
 	int "UBI wear-leveling threshold"
 	default 4096
 	range 2 65536
-	depends on MTD_UBI
 	help
 	  This parameter defines the maximum difference between the highest
 	  erase counter value and the lowest erase counter value of eraseblocks
@@ -30,26 +27,58 @@ config MTD_UBI_WL_THRESHOLD
 	  life-cycle less than 10000, the threshold should be lessened (e.g.,
 	  to 128 or 256, although it does not have to be power of 2).
 
-config MTD_UBI_BEB_RESERVE
-	int "Percentage of reserved eraseblocks for bad eraseblocks handling"
-	default 1
-	range 0 25
-	depends on MTD_UBI
+config MTD_UBI_BEB_LIMIT
+	int "Maximum expected bad eraseblock count per 1024 eraseblocks"
+	default 20
+	range 0 768
+	help
+	  This option specifies the maximum bad physical eraseblocks UBI
+	  expects on the MTD device (per 1024 eraseblocks). If the underlying
+	  flash does not admit of bad eraseblocks (e.g. NOR flash), this value
+	  is ignored.
+
+	  NAND datasheets often specify the minimum and maximum NVM (Number of
+	  Valid Blocks) for the flashes' endurance lifetime. The maximum
+	  expected bad eraseblocks per 1024 eraseblocks then can be calculated
+	  as "1024 * (1 - MinNVB / MaxNVB)", which gives 20 for most NANDs
+	  (MaxNVB is basically the total count of eraseblocks on the chip).
+
+	  To put it differently, if this value is 20, UBI will try to reserve
+	  about 1.9% of physical eraseblocks for bad blocks handling. And that
+	  will be 1.9% of eraseblocks on the entire NAND chip, not just the MTD
+	  partition UBI attaches. This means that if you have, say, a NAND
+	  flash chip admits maximum 40 bad eraseblocks, and it is split on two
+	  MTD partitions of the same size, UBI will reserve 40 eraseblocks when
+	  attaching a partition.
+
+	  This option can be overridden by the "mtd=" UBI module parameter or
+	  by the "attach" ioctl.
+
+	  Leave the default value if unsure.
+
+config MTD_UBI_FASTMAP
+	bool "UBI Fastmap (Experimental feature)"
+	default n
 	help
-	  If the MTD device admits of bad eraseblocks (e.g. NAND flash), UBI
-	  reserves some amount of physical eraseblocks to handle new bad
-	  eraseblocks. For example, if a flash physical eraseblock becomes bad,
-	  UBI uses these reserved physical eraseblocks to relocate the bad one.
-	  This option specifies how many physical eraseblocks will be reserved
-	  for bad eraseblock handling (percents of total number of good flash
-	  eraseblocks). If the underlying flash does not admit of bad
-	  eraseblocks (e.g. NOR flash), this value is ignored and nothing is
-	  reserved. Leave the default value if unsure.
+	   Important: this feature is experimental so far and the on-flash
+	   format for fastmap may change in the next kernel versions
+
+	   Fastmap is a mechanism which allows attaching an UBI device
+	   in nearly constant time. Instead of scanning the whole MTD device it
+	   only has to locate a checkpoint (called fastmap) on the device.
+	   The on-flash fastmap contains all information needed to attach
+	   the device. Using fastmap makes only sense on large devices where
+	   attaching by scanning takes long. UBI will not automatically install
+	   a fastmap on old images, but you can set the UBI module parameter
+	   fm_autoconvert to 1 if you want so. Please note that fastmap-enabled
+	   images are still usable with UBI implementations without
+	   fastmap support. On typical flash devices the whole fastmap fits
+	   into one PEB. UBI will reserve PEBs to hold two fastmaps.
+
+	   If in doubt, say "N".
 
 config MTD_UBI_GLUEBI
 	tristate "MTD devices emulation driver (gluebi)"
-	default n
-	depends on MTD_UBI
 	help
 	   This option enables gluebi - an additional driver which emulates MTD
 	   devices on top of UBI volumes: for each UBI volumes an MTD device is
@@ -58,5 +87,20 @@ config MTD_UBI_GLUEBI
 	   work on top of UBI. Do not enable this unless you use legacy
 	   software.
 
-source "drivers/mtd/ubi/Kconfig.debug"
-endmenu
+config MTD_UBI_BLOCK
+	bool "Read-only block devices on top of UBI volumes"
+	default n
+	depends on BLOCK
+	help
+	   This option enables read-only UBI block devices support. UBI block
+	   devices will be layered on top of UBI volumes, which means that the
+	   UBI driver will transparently handle things like bad eraseblocks and
+	   bit-flips. You can put any block-oriented file system on top of UBI
+	   volumes in read-only mode (e.g., ext4), but it is probably most
+	   practical for read-only file systems, like squashfs.
+
+	   When selected, this feature will be built in the UBI driver.
+
+	   If in doubt, say "N".
+
+endif # MTD_UBI
diff --git a/drivers/mtd/ubi/Kconfig.debug b/drivers/mtd/ubi/Kconfig.debug
deleted file mode 100644
index 2246f154e2f..00000000000
--- a/drivers/mtd/ubi/Kconfig.debug
+++ /dev/null
@@ -1,94 +0,0 @@
-comment "UBI debugging options"
-	depends on MTD_UBI
-
-config MTD_UBI_DEBUG
-	bool "UBI debugging"
-	depends on SYSFS
-	depends on MTD_UBI
-	select DEBUG_FS
-	select KALLSYMS_ALL
-	help
-	  This option enables UBI debugging.
-
-config MTD_UBI_DEBUG_MSG
-	bool "UBI debugging messages"
-	depends on MTD_UBI_DEBUG
-	default n
-	help
-	  This option enables UBI debugging messages.
-
-config MTD_UBI_DEBUG_PARANOID
-	bool "Extra self-checks"
-	default n
-	depends on MTD_UBI_DEBUG
-	help
-	  This option enables extra checks in UBI code. Note this slows UBI down
-	  significantly.
-
-config MTD_UBI_DEBUG_DISABLE_BGT
-	bool "Do not enable the UBI background thread"
-	depends on MTD_UBI_DEBUG
-	default n
-	help
-	  This option switches the background thread off by default. The thread
-	  may be also be enabled/disabled via UBI sysfs.
-
-config MTD_UBI_DEBUG_EMULATE_BITFLIPS
-	bool "Emulate flash bit-flips"
-	depends on MTD_UBI_DEBUG
-	default n
-	help
-	  This option emulates bit-flips with probability 1/50, which in turn
-	  causes scrubbing. Useful for debugging and stressing UBI.
-
-config MTD_UBI_DEBUG_EMULATE_WRITE_FAILURES
-	bool "Emulate flash write failures"
-	depends on MTD_UBI_DEBUG
-	default n
-	help
-	  This option emulates write failures with probability 1/100. Useful for
-	  debugging and testing how UBI handlines errors.
-
-config MTD_UBI_DEBUG_EMULATE_ERASE_FAILURES
-	bool "Emulate flash erase failures"
-	depends on MTD_UBI_DEBUG
-	default n
-	help
-	  This option emulates erase failures with probability 1/100. Useful for
-	  debugging and testing how UBI handlines errors.
-
-menu "Additional UBI debugging messages"
-	depends on MTD_UBI_DEBUG
-
-config MTD_UBI_DEBUG_MSG_BLD
-	bool "Additional UBI initialization and build messages"
-	default n
-	depends on MTD_UBI_DEBUG
-	help
-	  This option enables detailed UBI initialization and device build
-	  debugging messages.
-
-config MTD_UBI_DEBUG_MSG_EBA
-	bool "Eraseblock association unit messages"
-	default n
-	depends on MTD_UBI_DEBUG
-	help
-	  This option enables debugging messages from the UBI eraseblock
-	  association unit.
-
-config MTD_UBI_DEBUG_MSG_WL
-	bool "Wear-leveling unit messages"
-	default n
-	depends on MTD_UBI_DEBUG
-	help
-	  This option enables debugging messages from the UBI wear-leveling
-	  unit.
-
-config MTD_UBI_DEBUG_MSG_IO
-	bool "Input/output unit messages"
-	default n
-	depends on MTD_UBI_DEBUG
-	help
-	  This option enables debugging messages from the UBI input/output unit.
-
-endmenu # UBI debugging messages
diff --git a/drivers/mtd/ubi/Makefile b/drivers/mtd/ubi/Makefile
index c9302a5452b..4e3c3d70d8c 100644
--- a/drivers/mtd/ubi/Makefile
+++ b/drivers/mtd/ubi/Makefile
@@ -1,7 +1,8 @@
 obj-$(CONFIG_MTD_UBI) += ubi.o
 
-ubi-y += vtbl.o vmt.o upd.o build.o cdev.o kapi.o eba.o io.o wl.o scan.o
-ubi-y += misc.o
+ubi-y += vtbl.o vmt.o upd.o build.o cdev.o kapi.o eba.o io.o wl.o attach.o
+ubi-y += misc.o debug.o
+ubi-$(CONFIG_MTD_UBI_FASTMAP) += fastmap.o
+ubi-$(CONFIG_MTD_UBI_BLOCK) += block.o
 
-ubi-$(CONFIG_MTD_UBI_DEBUG) += debug.o
 obj-$(CONFIG_MTD_UBI_GLUEBI) += gluebi.o
diff --git a/drivers/mtd/ubi/attach.c b/drivers/mtd/ubi/attach.c
new file mode 100644
index 00000000000..6f27d9a1be3
--- /dev/null
+++ b/drivers/mtd/ubi/attach.c
@@ -0,0 +1,1757 @@
+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Artem Bityutskiy (Битюцкий Артём)
+ */
+
+/*
+ * UBI attaching sub-system.
+ *
+ * This sub-system is responsible for attaching MTD devices and it also
+ * implements flash media scanning.
+ *
+ * The attaching information is represented by a &struct ubi_attach_info'
+ * object. Information about volumes is represented by &struct ubi_ainf_volume
+ * objects which are kept in volume RB-tree with root at the @volumes field.
+ * The RB-tree is indexed by the volume ID.
+ *
+ * Logical eraseblocks are represented by &struct ubi_ainf_peb objects. These
+ * objects are kept in per-volume RB-trees with the root at the corresponding
+ * &struct ubi_ainf_volume object. To put it differently, we keep an RB-tree of
+ * per-volume objects and each of these objects is the root of RB-tree of
+ * per-LEB objects.
+ *
+ * Corrupted physical eraseblocks are put to the @corr list, free physical
+ * eraseblocks are put to the @free list and the physical eraseblock to be
+ * erased are put to the @erase list.
+ *
+ * About corruptions
+ * ~~~~~~~~~~~~~~~~~
+ *
+ * UBI protects EC and VID headers with CRC-32 checksums, so it can detect
+ * whether the headers are corrupted or not. Sometimes UBI also protects the
+ * data with CRC-32, e.g., when it executes the atomic LEB change operation, or
+ * when it moves the contents of a PEB for wear-leveling purposes.
+ *
+ * UBI tries to distinguish between 2 types of corruptions.
+ *
+ * 1. Corruptions caused by power cuts. These are expected corruptions and UBI
+ * tries to handle them gracefully, without printing too many warnings and
+ * error messages. The idea is that we do not lose important data in these
+ * cases - we may lose only the data which were being written to the media just
+ * before the power cut happened, and the upper layers (e.g., UBIFS) are
+ * supposed to handle such data losses (e.g., by using the FS journal).
+ *
+ * When UBI detects a corruption (CRC-32 mismatch) in a PEB, and it looks like
+ * the reason is a power cut, UBI puts this PEB to the @erase list, and all
+ * PEBs in the @erase list are scheduled for erasure later.
+ *
+ * 2. Unexpected corruptions which are not caused by power cuts. During
+ * attaching, such PEBs are put to the @corr list and UBI preserves them.
+ * Obviously, this lessens the amount of available PEBs, and if at some  point
+ * UBI runs out of free PEBs, it switches to R/O mode. UBI also loudly informs
+ * about such PEBs every time the MTD device is attached.
+ *
+ * However, it is difficult to reliably distinguish between these types of
+ * corruptions and UBI's strategy is as follows (in case of attaching by
+ * scanning). UBI assumes corruption type 2 if the VID header is corrupted and
+ * the data area does not contain all 0xFFs, and there were no bit-flips or
+ * integrity errors (e.g., ECC errors in case of NAND) while reading the data
+ * area.  Otherwise UBI assumes corruption type 1. So the decision criteria
+ * are as follows.
+ *   o If the data area contains only 0xFFs, there are no data, and it is safe
+ *     to just erase this PEB - this is corruption type 1.
+ *   o If the data area has bit-flips or data integrity errors (ECC errors on
+ *     NAND), it is probably a PEB which was being erased when power cut
+ *     happened, so this is corruption type 1. However, this is just a guess,
+ *     which might be wrong.
+ *   o Otherwise this is corruption type 2.
+ */
+
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/crc32.h>
+#include <linux/math64.h>
+#include <linux/random.h>
+#include "ubi.h"
+
+static int self_check_ai(struct ubi_device *ubi, struct ubi_attach_info *ai);
+
+/* Temporary variables used during scanning */
+static struct ubi_ec_hdr *ech;
+static struct ubi_vid_hdr *vidh;
+
+/**
+ * add_to_list - add physical eraseblock to a list.
+ * @ai: attaching information
+ * @pnum: physical eraseblock number to add
+ * @vol_id: the last used volume id for the PEB
+ * @lnum: the last used LEB number for the PEB
+ * @ec: erase counter of the physical eraseblock
+ * @to_head: if not zero, add to the head of the list
+ * @list: the list to add to
+ *
+ * This function allocates a 'struct ubi_ainf_peb' object for physical
+ * eraseblock @pnum and adds it to the "free", "erase", or "alien" lists.
+ * It stores the @lnum and @vol_id alongside, which can both be
+ * %UBI_UNKNOWN if they are not available, not readable, or not assigned.
+ * If @to_head is not zero, PEB will be added to the head of the list, which
+ * basically means it will be processed first later. E.g., we add corrupted
+ * PEBs (corrupted due to power cuts) to the head of the erase list to make
+ * sure we erase them first and get rid of corruptions ASAP. This function
+ * returns zero in case of success and a negative error code in case of
+ * failure.
+ */
+static int add_to_list(struct ubi_attach_info *ai, int pnum, int vol_id,
+		       int lnum, int ec, int to_head, struct list_head *list)
+{
+	struct ubi_ainf_peb *aeb;
+
+	if (list == &ai->free) {
+		dbg_bld("add to free: PEB %d, EC %d", pnum, ec);
+	} else if (list == &ai->erase) {
+		dbg_bld("add to erase: PEB %d, EC %d", pnum, ec);
+	} else if (list == &ai->alien) {
+		dbg_bld("add to alien: PEB %d, EC %d", pnum, ec);
+		ai->alien_peb_count += 1;
+	} else
+		BUG();
+
+	aeb = kmem_cache_alloc(ai->aeb_slab_cache, GFP_KERNEL);
+	if (!aeb)
+		return -ENOMEM;
+
+	aeb->pnum = pnum;
+	aeb->vol_id = vol_id;
+	aeb->lnum = lnum;
+	aeb->ec = ec;
+	if (to_head)
+		list_add(&aeb->u.list, list);
+	else
+		list_add_tail(&aeb->u.list, list);
+	return 0;
+}
+
+/**
+ * add_corrupted - add a corrupted physical eraseblock.
+ * @ai: attaching information
+ * @pnum: physical eraseblock number to add
+ * @ec: erase counter of the physical eraseblock
+ *
+ * This function allocates a 'struct ubi_ainf_peb' object for a corrupted
+ * physical eraseblock @pnum and adds it to the 'corr' list.  The corruption
+ * was presumably not caused by a power cut. Returns zero in case of success
+ * and a negative error code in case of failure.
+ */
+static int add_corrupted(struct ubi_attach_info *ai, int pnum, int ec)
+{
+	struct ubi_ainf_peb *aeb;
+
+	dbg_bld("add to corrupted: PEB %d, EC %d", pnum, ec);
+
+	aeb = kmem_cache_alloc(ai->aeb_slab_cache, GFP_KERNEL);
+	if (!aeb)
+		return -ENOMEM;
+
+	ai->corr_peb_count += 1;
+	aeb->pnum = pnum;
+	aeb->ec = ec;
+	list_add(&aeb->u.list, &ai->corr);
+	return 0;
+}
+
+/**
+ * validate_vid_hdr - check volume identifier header.
+ * @vid_hdr: the volume identifier header to check
+ * @av: information about the volume this logical eraseblock belongs to
+ * @pnum: physical eraseblock number the VID header came from
+ *
+ * This function checks that data stored in @vid_hdr is consistent. Returns
+ * non-zero if an inconsistency was found and zero if not.
+ *
+ * Note, UBI does sanity check of everything it reads from the flash media.
+ * Most of the checks are done in the I/O sub-system. Here we check that the
+ * information in the VID header is consistent to the information in other VID
+ * headers of the same volume.
+ */
+static int validate_vid_hdr(const struct ubi_vid_hdr *vid_hdr,
+			    const struct ubi_ainf_volume *av, int pnum)
+{
+	int vol_type = vid_hdr->vol_type;
+	int vol_id = be32_to_cpu(vid_hdr->vol_id);
+	int used_ebs = be32_to_cpu(vid_hdr->used_ebs);
+	int data_pad = be32_to_cpu(vid_hdr->data_pad);
+
+	if (av->leb_count != 0) {
+		int av_vol_type;
+
+		/*
+		 * This is not the first logical eraseblock belonging to this
+		 * volume. Ensure that the data in its VID header is consistent
+		 * to the data in previous logical eraseblock headers.
+		 */
+
+		if (vol_id != av->vol_id) {
+			ubi_err("inconsistent vol_id");
+			goto bad;
+		}
+
+		if (av->vol_type == UBI_STATIC_VOLUME)
+			av_vol_type = UBI_VID_STATIC;
+		else
+			av_vol_type = UBI_VID_DYNAMIC;
+
+		if (vol_type != av_vol_type) {
+			ubi_err("inconsistent vol_type");
+			goto bad;
+		}
+
+		if (used_ebs != av->used_ebs) {
+			ubi_err("inconsistent used_ebs");
+			goto bad;
+		}
+
+		if (data_pad != av->data_pad) {
+			ubi_err("inconsistent data_pad");
+			goto bad;
+		}
+	}
+
+	return 0;
+
+bad:
+	ubi_err("inconsistent VID header at PEB %d", pnum);
+	ubi_dump_vid_hdr(vid_hdr);
+	ubi_dump_av(av);
+	return -EINVAL;
+}
+
+/**
+ * add_volume - add volume to the attaching information.
+ * @ai: attaching information
+ * @vol_id: ID of the volume to add
+ * @pnum: physical eraseblock number
+ * @vid_hdr: volume identifier header
+ *
+ * If the volume corresponding to the @vid_hdr logical eraseblock is already
+ * present in the attaching information, this function does nothing. Otherwise
+ * it adds corresponding volume to the attaching information. Returns a pointer
+ * to the allocated "av" object in case of success and a negative error code in
+ * case of failure.
+ */
+static struct ubi_ainf_volume *add_volume(struct ubi_attach_info *ai,
+					  int vol_id, int pnum,
+					  const struct ubi_vid_hdr *vid_hdr)
+{
+	struct ubi_ainf_volume *av;
+	struct rb_node **p = &ai->volumes.rb_node, *parent = NULL;
+
+	ubi_assert(vol_id == be32_to_cpu(vid_hdr->vol_id));
+
+	/* Walk the volume RB-tree to look if this volume is already present */
+	while (*p) {
+		parent = *p;
+		av = rb_entry(parent, struct ubi_ainf_volume, rb);
+
+		if (vol_id == av->vol_id)
+			return av;
+
+		if (vol_id > av->vol_id)
+			p = &(*p)->rb_left;
+		else
+			p = &(*p)->rb_right;
+	}
+
+	/* The volume is absent - add it */
+	av = kmalloc(sizeof(struct ubi_ainf_volume), GFP_KERNEL);
+	if (!av)
+		return ERR_PTR(-ENOMEM);
+
+	av->highest_lnum = av->leb_count = 0;
+	av->vol_id = vol_id;
+	av->root = RB_ROOT;
+	av->used_ebs = be32_to_cpu(vid_hdr->used_ebs);
+	av->data_pad = be32_to_cpu(vid_hdr->data_pad);
+	av->compat = vid_hdr->compat;
+	av->vol_type = vid_hdr->vol_type == UBI_VID_DYNAMIC ? UBI_DYNAMIC_VOLUME
+							    : UBI_STATIC_VOLUME;
+	if (vol_id > ai->highest_vol_id)
+		ai->highest_vol_id = vol_id;
+
+	rb_link_node(&av->rb, parent, p);
+	rb_insert_color(&av->rb, &ai->volumes);
+	ai->vols_found += 1;
+	dbg_bld("added volume %d", vol_id);
+	return av;
+}
+
+/**
+ * ubi_compare_lebs - find out which logical eraseblock is newer.
+ * @ubi: UBI device description object
+ * @aeb: first logical eraseblock to compare
+ * @pnum: physical eraseblock number of the second logical eraseblock to
+ * compare
+ * @vid_hdr: volume identifier header of the second logical eraseblock
+ *
+ * This function compares 2 copies of a LEB and informs which one is newer. In
+ * case of success this function returns a positive value, in case of failure, a
+ * negative error code is returned. The success return codes use the following
+ * bits:
+ *     o bit 0 is cleared: the first PEB (described by @aeb) is newer than the
+ *       second PEB (described by @pnum and @vid_hdr);
+ *     o bit 0 is set: the second PEB is newer;
+ *     o bit 1 is cleared: no bit-flips were detected in the newer LEB;
+ *     o bit 1 is set: bit-flips were detected in the newer LEB;
+ *     o bit 2 is cleared: the older LEB is not corrupted;
+ *     o bit 2 is set: the older LEB is corrupted.
+ */
+int ubi_compare_lebs(struct ubi_device *ubi, const struct ubi_ainf_peb *aeb,
+			int pnum, const struct ubi_vid_hdr *vid_hdr)
+{
+	int len, err, second_is_newer, bitflips = 0, corrupted = 0;
+	uint32_t data_crc, crc;
+	struct ubi_vid_hdr *vh = NULL;
+	unsigned long long sqnum2 = be64_to_cpu(vid_hdr->sqnum);
+
+	if (sqnum2 == aeb->sqnum) {
+		/*
+		 * This must be a really ancient UBI image which has been
+		 * created before sequence numbers support has been added. At
+		 * that times we used 32-bit LEB versions stored in logical
+		 * eraseblocks. That was before UBI got into mainline. We do not
+		 * support these images anymore. Well, those images still work,
+		 * but only if no unclean reboots happened.
+		 */
+		ubi_err("unsupported on-flash UBI format");
+		return -EINVAL;
+	}
+
+	/* Obviously the LEB with lower sequence counter is older */
+	second_is_newer = (sqnum2 > aeb->sqnum);
+
+	/*
+	 * Now we know which copy is newer. If the copy flag of the PEB with
+	 * newer version is not set, then we just return, otherwise we have to
+	 * check data CRC. For the second PEB we already have the VID header,
+	 * for the first one - we'll need to re-read it from flash.
+	 *
+	 * Note: this may be optimized so that we wouldn't read twice.
+	 */
+
+	if (second_is_newer) {
+		if (!vid_hdr->copy_flag) {
+			/* It is not a copy, so it is newer */
+			dbg_bld("second PEB %d is newer, copy_flag is unset",
+				pnum);
+			return 1;
+		}
+	} else {
+		if (!aeb->copy_flag) {
+			/* It is not a copy, so it is newer */
+			dbg_bld("first PEB %d is newer, copy_flag is unset",
+				pnum);
+			return bitflips << 1;
+		}
+
+		vh = ubi_zalloc_vid_hdr(ubi, GFP_KERNEL);
+		if (!vh)
+			return -ENOMEM;
+
+		pnum = aeb->pnum;
+		err = ubi_io_read_vid_hdr(ubi, pnum, vh, 0);
+		if (err) {
+			if (err == UBI_IO_BITFLIPS)
+				bitflips = 1;
+			else {
+				ubi_err("VID of PEB %d header is bad, but it was OK earlier, err %d",
+					pnum, err);
+				if (err > 0)
+					err = -EIO;
+
+				goto out_free_vidh;
+			}
+		}
+
+		vid_hdr = vh;
+	}
+
+	/* Read the data of the copy and check the CRC */
+
+	len = be32_to_cpu(vid_hdr->data_size);
+
+	mutex_lock(&ubi->buf_mutex);
+	err = ubi_io_read_data(ubi, ubi->peb_buf, pnum, 0, len);
+	if (err && err != UBI_IO_BITFLIPS && !mtd_is_eccerr(err))
+		goto out_unlock;
+
+	data_crc = be32_to_cpu(vid_hdr->data_crc);
+	crc = crc32(UBI_CRC32_INIT, ubi->peb_buf, len);
+	if (crc != data_crc) {
+		dbg_bld("PEB %d CRC error: calculated %#08x, must be %#08x",
+			pnum, crc, data_crc);
+		corrupted = 1;
+		bitflips = 0;
+		second_is_newer = !second_is_newer;
+	} else {
+		dbg_bld("PEB %d CRC is OK", pnum);
+		bitflips = !!err;
+	}
+	mutex_unlock(&ubi->buf_mutex);
+
+	ubi_free_vid_hdr(ubi, vh);
+
+	if (second_is_newer)
+		dbg_bld("second PEB %d is newer, copy_flag is set", pnum);
+	else
+		dbg_bld("first PEB %d is newer, copy_flag is set", pnum);
+
+	return second_is_newer | (bitflips << 1) | (corrupted << 2);
+
+out_unlock:
+	mutex_unlock(&ubi->buf_mutex);
+out_free_vidh:
+	ubi_free_vid_hdr(ubi, vh);
+	return err;
+}
+
+/**
+ * ubi_add_to_av - add used physical eraseblock to the attaching information.
+ * @ubi: UBI device description object
+ * @ai: attaching information
+ * @pnum: the physical eraseblock number
+ * @ec: erase counter
+ * @vid_hdr: the volume identifier header
+ * @bitflips: if bit-flips were detected when this physical eraseblock was read
+ *
+ * This function adds information about a used physical eraseblock to the
+ * 'used' tree of the corresponding volume. The function is rather complex
+ * because it has to handle cases when this is not the first physical
+ * eraseblock belonging to the same logical eraseblock, and the newer one has
+ * to be picked, while the older one has to be dropped. This function returns
+ * zero in case of success and a negative error code in case of failure.
+ */
+int ubi_add_to_av(struct ubi_device *ubi, struct ubi_attach_info *ai, int pnum,
+		  int ec, const struct ubi_vid_hdr *vid_hdr, int bitflips)
+{
+	int err, vol_id, lnum;
+	unsigned long long sqnum;
+	struct ubi_ainf_volume *av;
+	struct ubi_ainf_peb *aeb;
+	struct rb_node **p, *parent = NULL;
+
+	vol_id = be32_to_cpu(vid_hdr->vol_id);
+	lnum = be32_to_cpu(vid_hdr->lnum);
+	sqnum = be64_to_cpu(vid_hdr->sqnum);
+
+	dbg_bld("PEB %d, LEB %d:%d, EC %d, sqnum %llu, bitflips %d",
+		pnum, vol_id, lnum, ec, sqnum, bitflips);
+
+	av = add_volume(ai, vol_id, pnum, vid_hdr);
+	if (IS_ERR(av))
+		return PTR_ERR(av);
+
+	if (ai->max_sqnum < sqnum)
+		ai->max_sqnum = sqnum;
+
+	/*
+	 * Walk the RB-tree of logical eraseblocks of volume @vol_id to look
+	 * if this is the first instance of this logical eraseblock or not.
+	 */
+	p = &av->root.rb_node;
+	while (*p) {
+		int cmp_res;
+
+		parent = *p;
+		aeb = rb_entry(parent, struct ubi_ainf_peb, u.rb);
+		if (lnum != aeb->lnum) {
+			if (lnum < aeb->lnum)
+				p = &(*p)->rb_left;
+			else
+				p = &(*p)->rb_right;
+			continue;
+		}
+
+		/*
+		 * There is already a physical eraseblock describing the same
+		 * logical eraseblock present.
+		 */
+
+		dbg_bld("this LEB already exists: PEB %d, sqnum %llu, EC %d",
+			aeb->pnum, aeb->sqnum, aeb->ec);
+
+		/*
+		 * Make sure that the logical eraseblocks have different
+		 * sequence numbers. Otherwise the image is bad.
+		 *
+		 * However, if the sequence number is zero, we assume it must
+		 * be an ancient UBI image from the era when UBI did not have
+		 * sequence numbers. We still can attach these images, unless
+		 * there is a need to distinguish between old and new
+		 * eraseblocks, in which case we'll refuse the image in
+		 * 'ubi_compare_lebs()'. In other words, we attach old clean
+		 * images, but refuse attaching old images with duplicated
+		 * logical eraseblocks because there was an unclean reboot.
+		 */
+		if (aeb->sqnum == sqnum && sqnum != 0) {
+			ubi_err("two LEBs with same sequence number %llu",
+				sqnum);
+			ubi_dump_aeb(aeb, 0);
+			ubi_dump_vid_hdr(vid_hdr);
+			return -EINVAL;
+		}
+
+		/*
+		 * Now we have to drop the older one and preserve the newer
+		 * one.
+		 */
+		cmp_res = ubi_compare_lebs(ubi, aeb, pnum, vid_hdr);
+		if (cmp_res < 0)
+			return cmp_res;
+
+		if (cmp_res & 1) {
+			/*
+			 * This logical eraseblock is newer than the one
+			 * found earlier.
+			 */
+			err = validate_vid_hdr(vid_hdr, av, pnum);
+			if (err)
+				return err;
+
+			err = add_to_list(ai, aeb->pnum, aeb->vol_id,
+					  aeb->lnum, aeb->ec, cmp_res & 4,
+					  &ai->erase);
+			if (err)
+				return err;
+
+			aeb->ec = ec;
+			aeb->pnum = pnum;
+			aeb->vol_id = vol_id;
+			aeb->lnum = lnum;
+			aeb->scrub = ((cmp_res & 2) || bitflips);
+			aeb->copy_flag = vid_hdr->copy_flag;
+			aeb->sqnum = sqnum;
+
+			if (av->highest_lnum == lnum)
+				av->last_data_size =
+					be32_to_cpu(vid_hdr->data_size);
+
+			return 0;
+		} else {
+			/*
+			 * This logical eraseblock is older than the one found
+			 * previously.
+			 */
+			return add_to_list(ai, pnum, vol_id, lnum, ec,
+					   cmp_res & 4, &ai->erase);
+		}
+	}
+
+	/*
+	 * We've met this logical eraseblock for the first time, add it to the
+	 * attaching information.
+	 */
+
+	err = validate_vid_hdr(vid_hdr, av, pnum);
+	if (err)
+		return err;
+
+	aeb = kmem_cache_alloc(ai->aeb_slab_cache, GFP_KERNEL);
+	if (!aeb)
+		return -ENOMEM;
+
+	aeb->ec = ec;
+	aeb->pnum = pnum;
+	aeb->vol_id = vol_id;
+	aeb->lnum = lnum;
+	aeb->scrub = bitflips;
+	aeb->copy_flag = vid_hdr->copy_flag;
+	aeb->sqnum = sqnum;
+
+	if (av->highest_lnum <= lnum) {
+		av->highest_lnum = lnum;
+		av->last_data_size = be32_to_cpu(vid_hdr->data_size);
+	}
+
+	av->leb_count += 1;
+	rb_link_node(&aeb->u.rb, parent, p);
+	rb_insert_color(&aeb->u.rb, &av->root);
+	return 0;
+}
+
+/**
+ * ubi_find_av - find volume in the attaching information.
+ * @ai: attaching information
+ * @vol_id: the requested volume ID
+ *
+ * This function returns a pointer to the volume description or %NULL if there
+ * are no data about this volume in the attaching information.
+ */
+struct ubi_ainf_volume *ubi_find_av(const struct ubi_attach_info *ai,
+				    int vol_id)
+{
+	struct ubi_ainf_volume *av;
+	struct rb_node *p = ai->volumes.rb_node;
+
+	while (p) {
+		av = rb_entry(p, struct ubi_ainf_volume, rb);
+
+		if (vol_id == av->vol_id)
+			return av;
+
+		if (vol_id > av->vol_id)
+			p = p->rb_left;
+		else
+			p = p->rb_right;
+	}
+
+	return NULL;
+}
+
+/**
+ * ubi_remove_av - delete attaching information about a volume.
+ * @ai: attaching information
+ * @av: the volume attaching information to delete
+ */
+void ubi_remove_av(struct ubi_attach_info *ai, struct ubi_ainf_volume *av)
+{
+	struct rb_node *rb;
+	struct ubi_ainf_peb *aeb;
+
+	dbg_bld("remove attaching information about volume %d", av->vol_id);
+
+	while ((rb = rb_first(&av->root))) {
+		aeb = rb_entry(rb, struct ubi_ainf_peb, u.rb);
+		rb_erase(&aeb->u.rb, &av->root);
+		list_add_tail(&aeb->u.list, &ai->erase);
+	}
+
+	rb_erase(&av->rb, &ai->volumes);
+	kfree(av);
+	ai->vols_found -= 1;
+}
+
+/**
+ * early_erase_peb - erase a physical eraseblock.
+ * @ubi: UBI device description object
+ * @ai: attaching information
+ * @pnum: physical eraseblock number to erase;
+ * @ec: erase counter value to write (%UBI_UNKNOWN if it is unknown)
+ *
+ * This function erases physical eraseblock 'pnum', and writes the erase
+ * counter header to it. This function should only be used on UBI device
+ * initialization stages, when the EBA sub-system had not been yet initialized.
+ * This function returns zero in case of success and a negative error code in
+ * case of failure.
+ */
+static int early_erase_peb(struct ubi_device *ubi,
+			   const struct ubi_attach_info *ai, int pnum, int ec)
+{
+	int err;
+	struct ubi_ec_hdr *ec_hdr;
+
+	if ((long long)ec >= UBI_MAX_ERASECOUNTER) {
+		/*
+		 * Erase counter overflow. Upgrade UBI and use 64-bit
+		 * erase counters internally.
+		 */
+		ubi_err("erase counter overflow at PEB %d, EC %d", pnum, ec);
+		return -EINVAL;
+	}
+
+	ec_hdr = kzalloc(ubi->ec_hdr_alsize, GFP_KERNEL);
+	if (!ec_hdr)
+		return -ENOMEM;
+
+	ec_hdr->ec = cpu_to_be64(ec);
+
+	err = ubi_io_sync_erase(ubi, pnum, 0);
+	if (err < 0)
+		goto out_free;
+
+	err = ubi_io_write_ec_hdr(ubi, pnum, ec_hdr);
+
+out_free:
+	kfree(ec_hdr);
+	return err;
+}
+
+/**
+ * ubi_early_get_peb - get a free physical eraseblock.
+ * @ubi: UBI device description object
+ * @ai: attaching information
+ *
+ * This function returns a free physical eraseblock. It is supposed to be
+ * called on the UBI initialization stages when the wear-leveling sub-system is
+ * not initialized yet. This function picks a physical eraseblocks from one of
+ * the lists, writes the EC header if it is needed, and removes it from the
+ * list.
+ *
+ * This function returns a pointer to the "aeb" of the found free PEB in case
+ * of success and an error code in case of failure.
+ */
+struct ubi_ainf_peb *ubi_early_get_peb(struct ubi_device *ubi,
+				       struct ubi_attach_info *ai)
+{
+	int err = 0;
+	struct ubi_ainf_peb *aeb, *tmp_aeb;
+
+	if (!list_empty(&ai->free)) {
+		aeb = list_entry(ai->free.next, struct ubi_ainf_peb, u.list);
+		list_del(&aeb->u.list);
+		dbg_bld("return free PEB %d, EC %d", aeb->pnum, aeb->ec);
+		return aeb;
+	}
+
+	/*
+	 * We try to erase the first physical eraseblock from the erase list
+	 * and pick it if we succeed, or try to erase the next one if not. And
+	 * so forth. We don't want to take care about bad eraseblocks here -
+	 * they'll be handled later.
+	 */
+	list_for_each_entry_safe(aeb, tmp_aeb, &ai->erase, u.list) {
+		if (aeb->ec == UBI_UNKNOWN)
+			aeb->ec = ai->mean_ec;
+
+		err = early_erase_peb(ubi, ai, aeb->pnum, aeb->ec+1);
+		if (err)
+			continue;
+
+		aeb->ec += 1;
+		list_del(&aeb->u.list);
+		dbg_bld("return PEB %d, EC %d", aeb->pnum, aeb->ec);
+		return aeb;
+	}
+
+	ubi_err("no free eraseblocks");
+	return ERR_PTR(-ENOSPC);
+}
+
+/**
+ * check_corruption - check the data area of PEB.
+ * @ubi: UBI device description object
+ * @vid_hdr: the (corrupted) VID header of this PEB
+ * @pnum: the physical eraseblock number to check
+ *
+ * This is a helper function which is used to distinguish between VID header
+ * corruptions caused by power cuts and other reasons. If the PEB contains only
+ * 0xFF bytes in the data area, the VID header is most probably corrupted
+ * because of a power cut (%0 is returned in this case). Otherwise, it was
+ * probably corrupted for some other reasons (%1 is returned in this case). A
+ * negative error code is returned if a read error occurred.
+ *
+ * If the corruption reason was a power cut, UBI can safely erase this PEB.
+ * Otherwise, it should preserve it to avoid possibly destroying important
+ * information.
+ */
+static int check_corruption(struct ubi_device *ubi, struct ubi_vid_hdr *vid_hdr,
+			    int pnum)
+{
+	int err;
+
+	mutex_lock(&ubi->buf_mutex);
+	memset(ubi->peb_buf, 0x00, ubi->leb_size);
+
+	err = ubi_io_read(ubi, ubi->peb_buf, pnum, ubi->leb_start,
+			  ubi->leb_size);
+	if (err == UBI_IO_BITFLIPS || mtd_is_eccerr(err)) {
+		/*
+		 * Bit-flips or integrity errors while reading the data area.
+		 * It is difficult to say for sure what type of corruption is
+		 * this, but presumably a power cut happened while this PEB was
+		 * erased, so it became unstable and corrupted, and should be
+		 * erased.
+		 */
+		err = 0;
+		goto out_unlock;
+	}
+
+	if (err)
+		goto out_unlock;
+
+	if (ubi_check_pattern(ubi->peb_buf, 0xFF, ubi->leb_size))
+		goto out_unlock;
+
+	ubi_err("PEB %d contains corrupted VID header, and the data does not contain all 0xFF",
+		pnum);
+	ubi_err("this may be a non-UBI PEB or a severe VID header corruption which requires manual inspection");
+	ubi_dump_vid_hdr(vid_hdr);
+	pr_err("hexdump of PEB %d offset %d, length %d",
+	       pnum, ubi->leb_start, ubi->leb_size);
+	ubi_dbg_print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
+			       ubi->peb_buf, ubi->leb_size, 1);
+	err = 1;
+
+out_unlock:
+	mutex_unlock(&ubi->buf_mutex);
+	return err;
+}
+
+/**
+ * scan_peb - scan and process UBI headers of a PEB.
+ * @ubi: UBI device description object
+ * @ai: attaching information
+ * @pnum: the physical eraseblock number
+ * @vid: The volume ID of the found volume will be stored in this pointer
+ * @sqnum: The sqnum of the found volume will be stored in this pointer
+ *
+ * This function reads UBI headers of PEB @pnum, checks them, and adds
+ * information about this PEB to the corresponding list or RB-tree in the
+ * "attaching info" structure. Returns zero if the physical eraseblock was
+ * successfully handled and a negative error code in case of failure.
+ */
+static int scan_peb(struct ubi_device *ubi, struct ubi_attach_info *ai,
+		    int pnum, int *vid, unsigned long long *sqnum)
+{
+	long long uninitialized_var(ec);
+	int err, bitflips = 0, vol_id = -1, ec_err = 0;
+
+	dbg_bld("scan PEB %d", pnum);
+
+	/* Skip bad physical eraseblocks */
+	err = ubi_io_is_bad(ubi, pnum);
+	if (err < 0)
+		return err;
+	else if (err) {
+		ai->bad_peb_count += 1;
+		return 0;
+	}
+
+	err = ubi_io_read_ec_hdr(ubi, pnum, ech, 0);
+	if (err < 0)
+		return err;
+	switch (err) {
+	case 0:
+		break;
+	case UBI_IO_BITFLIPS:
+		bitflips = 1;
+		break;
+	case UBI_IO_FF:
+		ai->empty_peb_count += 1;
+		return add_to_list(ai, pnum, UBI_UNKNOWN, UBI_UNKNOWN,
+				   UBI_UNKNOWN, 0, &ai->erase);
+	case UBI_IO_FF_BITFLIPS:
+		ai->empty_peb_count += 1;
+		return add_to_list(ai, pnum, UBI_UNKNOWN, UBI_UNKNOWN,
+				   UBI_UNKNOWN, 1, &ai->erase);
+	case UBI_IO_BAD_HDR_EBADMSG:
+	case UBI_IO_BAD_HDR:
+		/*
+		 * We have to also look at the VID header, possibly it is not
+		 * corrupted. Set %bitflips flag in order to make this PEB be
+		 * moved and EC be re-created.
+		 */
+		ec_err = err;
+		ec = UBI_UNKNOWN;
+		bitflips = 1;
+		break;
+	default:
+		ubi_err("'ubi_io_read_ec_hdr()' returned unknown code %d", err);
+		return -EINVAL;
+	}
+
+	if (!ec_err) {
+		int image_seq;
+
+		/* Make sure UBI version is OK */
+		if (ech->version != UBI_VERSION) {
+			ubi_err("this UBI version is %d, image version is %d",
+				UBI_VERSION, (int)ech->version);
+			return -EINVAL;
+		}
+
+		ec = be64_to_cpu(ech->ec);
+		if (ec > UBI_MAX_ERASECOUNTER) {
+			/*
+			 * Erase counter overflow. The EC headers have 64 bits
+			 * reserved, but we anyway make use of only 31 bit
+			 * values, as this seems to be enough for any existing
+			 * flash. Upgrade UBI and use 64-bit erase counters
+			 * internally.
+			 */
+			ubi_err("erase counter overflow, max is %d",
+				UBI_MAX_ERASECOUNTER);
+			ubi_dump_ec_hdr(ech);
+			return -EINVAL;
+		}
+
+		/*
+		 * Make sure that all PEBs have the same image sequence number.
+		 * This allows us to detect situations when users flash UBI
+		 * images incorrectly, so that the flash has the new UBI image
+		 * and leftovers from the old one. This feature was added
+		 * relatively recently, and the sequence number was always
+		 * zero, because old UBI implementations always set it to zero.
+		 * For this reasons, we do not panic if some PEBs have zero
+		 * sequence number, while other PEBs have non-zero sequence
+		 * number.
+		 */
+		image_seq = be32_to_cpu(ech->image_seq);
+		if (!ubi->image_seq)
+			ubi->image_seq = image_seq;
+		if (image_seq && ubi->image_seq != image_seq) {
+			ubi_err("bad image sequence number %d in PEB %d, expected %d",
+				image_seq, pnum, ubi->image_seq);
+			ubi_dump_ec_hdr(ech);
+			return -EINVAL;
+		}
+	}
+
+	/* OK, we've done with the EC header, let's look at the VID header */
+
+	err = ubi_io_read_vid_hdr(ubi, pnum, vidh, 0);
+	if (err < 0)
+		return err;
+	switch (err) {
+	case 0:
+		break;
+	case UBI_IO_BITFLIPS:
+		bitflips = 1;
+		break;
+	case UBI_IO_BAD_HDR_EBADMSG:
+		if (ec_err == UBI_IO_BAD_HDR_EBADMSG)
+			/*
+			 * Both EC and VID headers are corrupted and were read
+			 * with data integrity error, probably this is a bad
+			 * PEB, bit it is not marked as bad yet. This may also
+			 * be a result of power cut during erasure.
+			 */
+			ai->maybe_bad_peb_count += 1;
+	case UBI_IO_BAD_HDR:
+		if (ec_err)
+			/*
+			 * Both headers are corrupted. There is a possibility
+			 * that this a valid UBI PEB which has corresponding
+			 * LEB, but the headers are corrupted. However, it is
+			 * impossible to distinguish it from a PEB which just
+			 * contains garbage because of a power cut during erase
+			 * operation. So we just schedule this PEB for erasure.
+			 *
+			 * Besides, in case of NOR flash, we deliberately
+			 * corrupt both headers because NOR flash erasure is
+			 * slow and can start from the end.
+			 */
+			err = 0;
+		else
+			/*
+			 * The EC was OK, but the VID header is corrupted. We
+			 * have to check what is in the data area.
+			 */
+			err = check_corruption(ubi, vidh, pnum);
+
+		if (err < 0)
+			return err;
+		else if (!err)
+			/* This corruption is caused by a power cut */
+			err = add_to_list(ai, pnum, UBI_UNKNOWN,
+					  UBI_UNKNOWN, ec, 1, &ai->erase);
+		else
+			/* This is an unexpected corruption */
+			err = add_corrupted(ai, pnum, ec);
+		if (err)
+			return err;
+		goto adjust_mean_ec;
+	case UBI_IO_FF_BITFLIPS:
+		err = add_to_list(ai, pnum, UBI_UNKNOWN, UBI_UNKNOWN,
+				  ec, 1, &ai->erase);
+		if (err)
+			return err;
+		goto adjust_mean_ec;
+	case UBI_IO_FF:
+		if (ec_err || bitflips)
+			err = add_to_list(ai, pnum, UBI_UNKNOWN,
+					  UBI_UNKNOWN, ec, 1, &ai->erase);
+		else
+			err = add_to_list(ai, pnum, UBI_UNKNOWN,
+					  UBI_UNKNOWN, ec, 0, &ai->free);
+		if (err)
+			return err;
+		goto adjust_mean_ec;
+	default:
+		ubi_err("'ubi_io_read_vid_hdr()' returned unknown code %d",
+			err);
+		return -EINVAL;
+	}
+
+	vol_id = be32_to_cpu(vidh->vol_id);
+	if (vid)
+		*vid = vol_id;
+	if (sqnum)
+		*sqnum = be64_to_cpu(vidh->sqnum);
+	if (vol_id > UBI_MAX_VOLUMES && vol_id != UBI_LAYOUT_VOLUME_ID) {
+		int lnum = be32_to_cpu(vidh->lnum);
+
+		/* Unsupported internal volume */
+		switch (vidh->compat) {
+		case UBI_COMPAT_DELETE:
+			if (vol_id != UBI_FM_SB_VOLUME_ID
+			    && vol_id != UBI_FM_DATA_VOLUME_ID) {
+				ubi_msg("\"delete\" compatible internal volume %d:%d found, will remove it",
+					vol_id, lnum);
+			}
+			err = add_to_list(ai, pnum, vol_id, lnum,
+					  ec, 1, &ai->erase);
+			if (err)
+				return err;
+			return 0;
+
+		case UBI_COMPAT_RO:
+			ubi_msg("read-only compatible internal volume %d:%d found, switch to read-only mode",
+				vol_id, lnum);
+			ubi->ro_mode = 1;
+			break;
+
+		case UBI_COMPAT_PRESERVE:
+			ubi_msg("\"preserve\" compatible internal volume %d:%d found",
+				vol_id, lnum);
+			err = add_to_list(ai, pnum, vol_id, lnum,
+					  ec, 0, &ai->alien);
+			if (err)
+				return err;
+			return 0;
+
+		case UBI_COMPAT_REJECT:
+			ubi_err("incompatible internal volume %d:%d found",
+				vol_id, lnum);
+			return -EINVAL;
+		}
+	}
+
+	if (ec_err)
+		ubi_warn("valid VID header but corrupted EC header at PEB %d",
+			 pnum);
+	err = ubi_add_to_av(ubi, ai, pnum, ec, vidh, bitflips);
+	if (err)
+		return err;
+
+adjust_mean_ec:
+	if (!ec_err) {
+		ai->ec_sum += ec;
+		ai->ec_count += 1;
+		if (ec > ai->max_ec)
+			ai->max_ec = ec;
+		if (ec < ai->min_ec)
+			ai->min_ec = ec;
+	}
+
+	return 0;
+}
+
+/**
+ * late_analysis - analyze the overall situation with PEB.
+ * @ubi: UBI device description object
+ * @ai: attaching information
+ *
+ * This is a helper function which takes a look what PEBs we have after we
+ * gather information about all of them ("ai" is compete). It decides whether
+ * the flash is empty and should be formatted of whether there are too many
+ * corrupted PEBs and we should not attach this MTD device. Returns zero if we
+ * should proceed with attaching the MTD device, and %-EINVAL if we should not.
+ */
+static int late_analysis(struct ubi_device *ubi, struct ubi_attach_info *ai)
+{
+	struct ubi_ainf_peb *aeb;
+	int max_corr, peb_count;
+
+	peb_count = ubi->peb_count - ai->bad_peb_count - ai->alien_peb_count;
+	max_corr = peb_count / 20 ?: 8;
+
+	/*
+	 * Few corrupted PEBs is not a problem and may be just a result of
+	 * unclean reboots. However, many of them may indicate some problems
+	 * with the flash HW or driver.
+	 */
+	if (ai->corr_peb_count) {
+		ubi_err("%d PEBs are corrupted and preserved",
+			ai->corr_peb_count);
+		pr_err("Corrupted PEBs are:");
+		list_for_each_entry(aeb, &ai->corr, u.list)
+			pr_cont(" %d", aeb->pnum);
+		pr_cont("\n");
+
+		/*
+		 * If too many PEBs are corrupted, we refuse attaching,
+		 * otherwise, only print a warning.
+		 */
+		if (ai->corr_peb_count >= max_corr) {
+			ubi_err("too many corrupted PEBs, refusing");
+			return -EINVAL;
+		}
+	}
+
+	if (ai->empty_peb_count + ai->maybe_bad_peb_count == peb_count) {
+		/*
+		 * All PEBs are empty, or almost all - a couple PEBs look like
+		 * they may be bad PEBs which were not marked as bad yet.
+		 *
+		 * This piece of code basically tries to distinguish between
+		 * the following situations:
+		 *
+		 * 1. Flash is empty, but there are few bad PEBs, which are not
+		 *    marked as bad so far, and which were read with error. We
+		 *    want to go ahead and format this flash. While formatting,
+		 *    the faulty PEBs will probably be marked as bad.
+		 *
+		 * 2. Flash contains non-UBI data and we do not want to format
+		 *    it and destroy possibly important information.
+		 */
+		if (ai->maybe_bad_peb_count <= 2) {
+			ai->is_empty = 1;
+			ubi_msg("empty MTD device detected");
+			get_random_bytes(&ubi->image_seq,
+					 sizeof(ubi->image_seq));
+		} else {
+			ubi_err("MTD device is not UBI-formatted and possibly contains non-UBI data - refusing it");
+			return -EINVAL;
+		}
+
+	}
+
+	return 0;
+}
+
+/**
+ * destroy_av - free volume attaching information.
+ * @av: volume attaching information
+ * @ai: attaching information
+ *
+ * This function destroys the volume attaching information.
+ */
+static void destroy_av(struct ubi_attach_info *ai, struct ubi_ainf_volume *av)
+{
+	struct ubi_ainf_peb *aeb;
+	struct rb_node *this = av->root.rb_node;
+
+	while (this) {
+		if (this->rb_left)
+			this = this->rb_left;
+		else if (this->rb_right)
+			this = this->rb_right;
+		else {
+			aeb = rb_entry(this, struct ubi_ainf_peb, u.rb);
+			this = rb_parent(this);
+			if (this) {
+				if (this->rb_left == &aeb->u.rb)
+					this->rb_left = NULL;
+				else
+					this->rb_right = NULL;
+			}
+
+			kmem_cache_free(ai->aeb_slab_cache, aeb);
+		}
+	}
+	kfree(av);
+}
+
+/**
+ * destroy_ai - destroy attaching information.
+ * @ai: attaching information
+ */
+static void destroy_ai(struct ubi_attach_info *ai)
+{
+	struct ubi_ainf_peb *aeb, *aeb_tmp;
+	struct ubi_ainf_volume *av;
+	struct rb_node *rb;
+
+	list_for_each_entry_safe(aeb, aeb_tmp, &ai->alien, u.list) {
+		list_del(&aeb->u.list);
+		kmem_cache_free(ai->aeb_slab_cache, aeb);
+	}
+	list_for_each_entry_safe(aeb, aeb_tmp, &ai->erase, u.list) {
+		list_del(&aeb->u.list);
+		kmem_cache_free(ai->aeb_slab_cache, aeb);
+	}
+	list_for_each_entry_safe(aeb, aeb_tmp, &ai->corr, u.list) {
+		list_del(&aeb->u.list);
+		kmem_cache_free(ai->aeb_slab_cache, aeb);
+	}
+	list_for_each_entry_safe(aeb, aeb_tmp, &ai->free, u.list) {
+		list_del(&aeb->u.list);
+		kmem_cache_free(ai->aeb_slab_cache, aeb);
+	}
+
+	/* Destroy the volume RB-tree */
+	rb = ai->volumes.rb_node;
+	while (rb) {
+		if (rb->rb_left)
+			rb = rb->rb_left;
+		else if (rb->rb_right)
+			rb = rb->rb_right;
+		else {
+			av = rb_entry(rb, struct ubi_ainf_volume, rb);
+
+			rb = rb_parent(rb);
+			if (rb) {
+				if (rb->rb_left == &av->rb)
+					rb->rb_left = NULL;
+				else
+					rb->rb_right = NULL;
+			}
+
+			destroy_av(ai, av);
+		}
+	}
+
+	if (ai->aeb_slab_cache)
+		kmem_cache_destroy(ai->aeb_slab_cache);
+
+	kfree(ai);
+}
+
+/**
+ * scan_all - scan entire MTD device.
+ * @ubi: UBI device description object
+ * @ai: attach info object
+ * @start: start scanning at this PEB
+ *
+ * This function does full scanning of an MTD device and returns complete
+ * information about it in form of a "struct ubi_attach_info" object. In case
+ * of failure, an error code is returned.
+ */
+static int scan_all(struct ubi_device *ubi, struct ubi_attach_info *ai,
+		    int start)
+{
+	int err, pnum;
+	struct rb_node *rb1, *rb2;
+	struct ubi_ainf_volume *av;
+	struct ubi_ainf_peb *aeb;
+
+	err = -ENOMEM;
+
+	ech = kzalloc(ubi->ec_hdr_alsize, GFP_KERNEL);
+	if (!ech)
+		return err;
+
+	vidh = ubi_zalloc_vid_hdr(ubi, GFP_KERNEL);
+	if (!vidh)
+		goto out_ech;
+
+	for (pnum = start; pnum < ubi->peb_count; pnum++) {
+		cond_resched();
+
+		dbg_gen("process PEB %d", pnum);
+		err = scan_peb(ubi, ai, pnum, NULL, NULL);
+		if (err < 0)
+			goto out_vidh;
+	}
+
+	ubi_msg("scanning is finished");
+
+	/* Calculate mean erase counter */
+	if (ai->ec_count)
+		ai->mean_ec = div_u64(ai->ec_sum, ai->ec_count);
+
+	err = late_analysis(ubi, ai);
+	if (err)
+		goto out_vidh;
+
+	/*
+	 * In case of unknown erase counter we use the mean erase counter
+	 * value.
+	 */
+	ubi_rb_for_each_entry(rb1, av, &ai->volumes, rb) {
+		ubi_rb_for_each_entry(rb2, aeb, &av->root, u.rb)
+			if (aeb->ec == UBI_UNKNOWN)
+				aeb->ec = ai->mean_ec;
+	}
+
+	list_for_each_entry(aeb, &ai->free, u.list) {
+		if (aeb->ec == UBI_UNKNOWN)
+			aeb->ec = ai->mean_ec;
+	}
+
+	list_for_each_entry(aeb, &ai->corr, u.list)
+		if (aeb->ec == UBI_UNKNOWN)
+			aeb->ec = ai->mean_ec;
+
+	list_for_each_entry(aeb, &ai->erase, u.list)
+		if (aeb->ec == UBI_UNKNOWN)
+			aeb->ec = ai->mean_ec;
+
+	err = self_check_ai(ubi, ai);
+	if (err)
+		goto out_vidh;
+
+	ubi_free_vid_hdr(ubi, vidh);
+	kfree(ech);
+
+	return 0;
+
+out_vidh:
+	ubi_free_vid_hdr(ubi, vidh);
+out_ech:
+	kfree(ech);
+	return err;
+}
+
+#ifdef CONFIG_MTD_UBI_FASTMAP
+
+/**
+ * scan_fastmap - try to find a fastmap and attach from it.
+ * @ubi: UBI device description object
+ * @ai: attach info object
+ *
+ * Returns 0 on success, negative return values indicate an internal
+ * error.
+ * UBI_NO_FASTMAP denotes that no fastmap was found.
+ * UBI_BAD_FASTMAP denotes that the found fastmap was invalid.
+ */
+static int scan_fast(struct ubi_device *ubi, struct ubi_attach_info *ai)
+{
+	int err, pnum, fm_anchor = -1;
+	unsigned long long max_sqnum = 0;
+
+	err = -ENOMEM;
+
+	ech = kzalloc(ubi->ec_hdr_alsize, GFP_KERNEL);
+	if (!ech)
+		goto out;
+
+	vidh = ubi_zalloc_vid_hdr(ubi, GFP_KERNEL);
+	if (!vidh)
+		goto out_ech;
+
+	for (pnum = 0; pnum < UBI_FM_MAX_START; pnum++) {
+		int vol_id = -1;
+		unsigned long long sqnum = -1;
+		cond_resched();
+
+		dbg_gen("process PEB %d", pnum);
+		err = scan_peb(ubi, ai, pnum, &vol_id, &sqnum);
+		if (err < 0)
+			goto out_vidh;
+
+		if (vol_id == UBI_FM_SB_VOLUME_ID && sqnum > max_sqnum) {
+			max_sqnum = sqnum;
+			fm_anchor = pnum;
+		}
+	}
+
+	ubi_free_vid_hdr(ubi, vidh);
+	kfree(ech);
+
+	if (fm_anchor < 0)
+		return UBI_NO_FASTMAP;
+
+	return ubi_scan_fastmap(ubi, ai, fm_anchor);
+
+out_vidh:
+	ubi_free_vid_hdr(ubi, vidh);
+out_ech:
+	kfree(ech);
+out:
+	return err;
+}
+
+#endif
+
+static struct ubi_attach_info *alloc_ai(const char *slab_name)
+{
+	struct ubi_attach_info *ai;
+
+	ai = kzalloc(sizeof(struct ubi_attach_info), GFP_KERNEL);
+	if (!ai)
+		return ai;
+
+	INIT_LIST_HEAD(&ai->corr);
+	INIT_LIST_HEAD(&ai->free);
+	INIT_LIST_HEAD(&ai->erase);
+	INIT_LIST_HEAD(&ai->alien);
+	ai->volumes = RB_ROOT;
+	ai->aeb_slab_cache = kmem_cache_create(slab_name,
+					       sizeof(struct ubi_ainf_peb),
+					       0, 0, NULL);
+	if (!ai->aeb_slab_cache) {
+		kfree(ai);
+		ai = NULL;
+	}
+
+	return ai;
+}
+
+/**
+ * ubi_attach - attach an MTD device.
+ * @ubi: UBI device descriptor
+ * @force_scan: if set to non-zero attach by scanning
+ *
+ * This function returns zero in case of success and a negative error code in
+ * case of failure.
+ */
+int ubi_attach(struct ubi_device *ubi, int force_scan)
+{
+	int err;
+	struct ubi_attach_info *ai;
+
+	ai = alloc_ai("ubi_aeb_slab_cache");
+	if (!ai)
+		return -ENOMEM;
+
+#ifdef CONFIG_MTD_UBI_FASTMAP
+	/* On small flash devices we disable fastmap in any case. */
+	if ((int)mtd_div_by_eb(ubi->mtd->size, ubi->mtd) <= UBI_FM_MAX_START) {
+		ubi->fm_disabled = 1;
+		force_scan = 1;
+	}
+
+	if (force_scan)
+		err = scan_all(ubi, ai, 0);
+	else {
+		err = scan_fast(ubi, ai);
+		if (err > 0) {
+			if (err != UBI_NO_FASTMAP) {
+				destroy_ai(ai);
+				ai = alloc_ai("ubi_aeb_slab_cache2");
+				if (!ai)
+					return -ENOMEM;
+
+				err = scan_all(ubi, ai, 0);
+			} else {
+				err = scan_all(ubi, ai, UBI_FM_MAX_START);
+			}
+		}
+	}
+#else
+	err = scan_all(ubi, ai, 0);
+#endif
+	if (err)
+		goto out_ai;
+
+	ubi->bad_peb_count = ai->bad_peb_count;
+	ubi->good_peb_count = ubi->peb_count - ubi->bad_peb_count;
+	ubi->corr_peb_count = ai->corr_peb_count;
+	ubi->max_ec = ai->max_ec;
+	ubi->mean_ec = ai->mean_ec;
+	dbg_gen("max. sequence number:       %llu", ai->max_sqnum);
+
+	err = ubi_read_volume_table(ubi, ai);
+	if (err)
+		goto out_ai;
+
+	err = ubi_wl_init(ubi, ai);
+	if (err)
+		goto out_vtbl;
+
+	err = ubi_eba_init(ubi, ai);
+	if (err)
+		goto out_wl;
+
+#ifdef CONFIG_MTD_UBI_FASTMAP
+	if (ubi->fm && ubi_dbg_chk_gen(ubi)) {
+		struct ubi_attach_info *scan_ai;
+
+		scan_ai = alloc_ai("ubi_ckh_aeb_slab_cache");
+		if (!scan_ai) {
+			err = -ENOMEM;
+			goto out_wl;
+		}
+
+		err = scan_all(ubi, scan_ai, 0);
+		if (err) {
+			destroy_ai(scan_ai);
+			goto out_wl;
+		}
+
+		err = self_check_eba(ubi, ai, scan_ai);
+		destroy_ai(scan_ai);
+
+		if (err)
+			goto out_wl;
+	}
+#endif
+
+	destroy_ai(ai);
+	return 0;
+
+out_wl:
+	ubi_wl_close(ubi);
+out_vtbl:
+	ubi_free_internal_volumes(ubi);
+	vfree(ubi->vtbl);
+out_ai:
+	destroy_ai(ai);
+	return err;
+}
+
+/**
+ * self_check_ai - check the attaching information.
+ * @ubi: UBI device description object
+ * @ai: attaching information
+ *
+ * This function returns zero if the attaching information is all right, and a
+ * negative error code if not or if an error occurred.
+ */
+static int self_check_ai(struct ubi_device *ubi, struct ubi_attach_info *ai)
+{
+	int pnum, err, vols_found = 0;
+	struct rb_node *rb1, *rb2;
+	struct ubi_ainf_volume *av;
+	struct ubi_ainf_peb *aeb, *last_aeb;
+	uint8_t *buf;
+
+	if (!ubi_dbg_chk_gen(ubi))
+		return 0;
+
+	/*
+	 * At first, check that attaching information is OK.
+	 */
+	ubi_rb_for_each_entry(rb1, av, &ai->volumes, rb) {
+		int leb_count = 0;
+
+		cond_resched();
+
+		vols_found += 1;
+
+		if (ai->is_empty) {
+			ubi_err("bad is_empty flag");
+			goto bad_av;
+		}
+
+		if (av->vol_id < 0 || av->highest_lnum < 0 ||
+		    av->leb_count < 0 || av->vol_type < 0 || av->used_ebs < 0 ||
+		    av->data_pad < 0 || av->last_data_size < 0) {
+			ubi_err("negative values");
+			goto bad_av;
+		}
+
+		if (av->vol_id >= UBI_MAX_VOLUMES &&
+		    av->vol_id < UBI_INTERNAL_VOL_START) {
+			ubi_err("bad vol_id");
+			goto bad_av;
+		}
+
+		if (av->vol_id > ai->highest_vol_id) {
+			ubi_err("highest_vol_id is %d, but vol_id %d is there",
+				ai->highest_vol_id, av->vol_id);
+			goto out;
+		}
+
+		if (av->vol_type != UBI_DYNAMIC_VOLUME &&
+		    av->vol_type != UBI_STATIC_VOLUME) {
+			ubi_err("bad vol_type");
+			goto bad_av;
+		}
+
+		if (av->data_pad > ubi->leb_size / 2) {
+			ubi_err("bad data_pad");
+			goto bad_av;
+		}
+
+		last_aeb = NULL;
+		ubi_rb_for_each_entry(rb2, aeb, &av->root, u.rb) {
+			cond_resched();
+
+			last_aeb = aeb;
+			leb_count += 1;
+
+			if (aeb->pnum < 0 || aeb->ec < 0) {
+				ubi_err("negative values");
+				goto bad_aeb;
+			}
+
+			if (aeb->ec < ai->min_ec) {
+				ubi_err("bad ai->min_ec (%d), %d found",
+					ai->min_ec, aeb->ec);
+				goto bad_aeb;
+			}
+
+			if (aeb->ec > ai->max_ec) {
+				ubi_err("bad ai->max_ec (%d), %d found",
+					ai->max_ec, aeb->ec);
+				goto bad_aeb;
+			}
+
+			if (aeb->pnum >= ubi->peb_count) {
+				ubi_err("too high PEB number %d, total PEBs %d",
+					aeb->pnum, ubi->peb_count);
+				goto bad_aeb;
+			}
+
+			if (av->vol_type == UBI_STATIC_VOLUME) {
+				if (aeb->lnum >= av->used_ebs) {
+					ubi_err("bad lnum or used_ebs");
+					goto bad_aeb;
+				}
+			} else {
+				if (av->used_ebs != 0) {
+					ubi_err("non-zero used_ebs");
+					goto bad_aeb;
+				}
+			}
+
+			if (aeb->lnum > av->highest_lnum) {
+				ubi_err("incorrect highest_lnum or lnum");
+				goto bad_aeb;
+			}
+		}
+
+		if (av->leb_count != leb_count) {
+			ubi_err("bad leb_count, %d objects in the tree",
+				leb_count);
+			goto bad_av;
+		}
+
+		if (!last_aeb)
+			continue;
+
+		aeb = last_aeb;
+
+		if (aeb->lnum != av->highest_lnum) {
+			ubi_err("bad highest_lnum");
+			goto bad_aeb;
+		}
+	}
+
+	if (vols_found != ai->vols_found) {
+		ubi_err("bad ai->vols_found %d, should be %d",
+			ai->vols_found, vols_found);
+		goto out;
+	}
+
+	/* Check that attaching information is correct */
+	ubi_rb_for_each_entry(rb1, av, &ai->volumes, rb) {
+		last_aeb = NULL;
+		ubi_rb_for_each_entry(rb2, aeb, &av->root, u.rb) {
+			int vol_type;
+
+			cond_resched();
+
+			last_aeb = aeb;
+
+			err = ubi_io_read_vid_hdr(ubi, aeb->pnum, vidh, 1);
+			if (err && err != UBI_IO_BITFLIPS) {
+				ubi_err("VID header is not OK (%d)", err);
+				if (err > 0)
+					err = -EIO;
+				return err;
+			}
+
+			vol_type = vidh->vol_type == UBI_VID_DYNAMIC ?
+				   UBI_DYNAMIC_VOLUME : UBI_STATIC_VOLUME;
+			if (av->vol_type != vol_type) {
+				ubi_err("bad vol_type");
+				goto bad_vid_hdr;
+			}
+
+			if (aeb->sqnum != be64_to_cpu(vidh->sqnum)) {
+				ubi_err("bad sqnum %llu", aeb->sqnum);
+				goto bad_vid_hdr;
+			}
+
+			if (av->vol_id != be32_to_cpu(vidh->vol_id)) {
+				ubi_err("bad vol_id %d", av->vol_id);
+				goto bad_vid_hdr;
+			}
+
+			if (av->compat != vidh->compat) {
+				ubi_err("bad compat %d", vidh->compat);
+				goto bad_vid_hdr;
+			}
+
+			if (aeb->lnum != be32_to_cpu(vidh->lnum)) {
+				ubi_err("bad lnum %d", aeb->lnum);
+				goto bad_vid_hdr;
+			}
+
+			if (av->used_ebs != be32_to_cpu(vidh->used_ebs)) {
+				ubi_err("bad used_ebs %d", av->used_ebs);
+				goto bad_vid_hdr;
+			}
+
+			if (av->data_pad != be32_to_cpu(vidh->data_pad)) {
+				ubi_err("bad data_pad %d", av->data_pad);
+				goto bad_vid_hdr;
+			}
+		}
+
+		if (!last_aeb)
+			continue;
+
+		if (av->highest_lnum != be32_to_cpu(vidh->lnum)) {
+			ubi_err("bad highest_lnum %d", av->highest_lnum);
+			goto bad_vid_hdr;
+		}
+
+		if (av->last_data_size != be32_to_cpu(vidh->data_size)) {
+			ubi_err("bad last_data_size %d", av->last_data_size);
+			goto bad_vid_hdr;
+		}
+	}
+
+	/*
+	 * Make sure that all the physical eraseblocks are in one of the lists
+	 * or trees.
+	 */
+	buf = kzalloc(ubi->peb_count, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	for (pnum = 0; pnum < ubi->peb_count; pnum++) {
+		err = ubi_io_is_bad(ubi, pnum);
+		if (err < 0) {
+			kfree(buf);
+			return err;
+		} else if (err)
+			buf[pnum] = 1;
+	}
+
+	ubi_rb_for_each_entry(rb1, av, &ai->volumes, rb)
+		ubi_rb_for_each_entry(rb2, aeb, &av->root, u.rb)
+			buf[aeb->pnum] = 1;
+
+	list_for_each_entry(aeb, &ai->free, u.list)
+		buf[aeb->pnum] = 1;
+
+	list_for_each_entry(aeb, &ai->corr, u.list)
+		buf[aeb->pnum] = 1;
+
+	list_for_each_entry(aeb, &ai->erase, u.list)
+		buf[aeb->pnum] = 1;
+
+	list_for_each_entry(aeb, &ai->alien, u.list)
+		buf[aeb->pnum] = 1;
+
+	err = 0;
+	for (pnum = 0; pnum < ubi->peb_count; pnum++)
+		if (!buf[pnum]) {
+			ubi_err("PEB %d is not referred", pnum);
+			err = 1;
+		}
+
+	kfree(buf);
+	if (err)
+		goto out;
+	return 0;
+
+bad_aeb:
+	ubi_err("bad attaching information about LEB %d", aeb->lnum);
+	ubi_dump_aeb(aeb, 0);
+	ubi_dump_av(av);
+	goto out;
+
+bad_av:
+	ubi_err("bad attaching information about volume %d", av->vol_id);
+	ubi_dump_av(av);
+	goto out;
+
+bad_vid_hdr:
+	ubi_err("bad attaching information about volume %d", av->vol_id);
+	ubi_dump_av(av);
+	ubi_dump_vid_hdr(vidh);
+
+out:
+	dump_stack();
+	return -EINVAL;
+}
diff --git a/drivers/mtd/ubi/block.c b/drivers/mtd/ubi/block.c
new file mode 100644
index 00000000000..8457df7ec5a
--- /dev/null
+++ b/drivers/mtd/ubi/block.c
@@ -0,0 +1,649 @@
+/*
+ * Copyright (c) 2014 Ezequiel Garcia
+ * Copyright (c) 2011 Free Electrons
+ *
+ * Driver parameter handling strongly based on drivers/mtd/ubi/build.c
+ *   Copyright (c) International Business Machines Corp., 2006
+ *   Copyright (c) Nokia Corporation, 2007
+ *   Authors: Artem Bityutskiy, Frank Haverkamp
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ */
+
+/*
+ * Read-only block devices on top of UBI volumes
+ *
+ * A simple implementation to allow a block device to be layered on top of a
+ * UBI volume. The implementation is provided by creating a static 1-to-1
+ * mapping between the block device and the UBI volume.
+ *
+ * The addressed byte is obtained from the addressed block sector, which is
+ * mapped linearly into the corresponding LEB:
+ *
+ *   LEB number = addressed byte / LEB size
+ *
+ * This feature is compiled in the UBI core, and adds a 'block' parameter
+ * to allow early creation of block devices on top of UBI volumes. Runtime
+ * block creation/removal for UBI volumes is provided through two UBI ioctls:
+ * UBI_IOCVOLCRBLK and UBI_IOCVOLRMBLK.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/mtd/ubi.h>
+#include <linux/workqueue.h>
+#include <linux/blkdev.h>
+#include <linux/hdreg.h>
+#include <asm/div64.h>
+
+#include "ubi-media.h"
+#include "ubi.h"
+
+/* Maximum number of supported devices */
+#define UBIBLOCK_MAX_DEVICES 32
+
+/* Maximum length of the 'block=' parameter */
+#define UBIBLOCK_PARAM_LEN 63
+
+/* Maximum number of comma-separated items in the 'block=' parameter */
+#define UBIBLOCK_PARAM_COUNT 2
+
+struct ubiblock_param {
+	int ubi_num;
+	int vol_id;
+	char name[UBIBLOCK_PARAM_LEN+1];
+};
+
+/* Numbers of elements set in the @ubiblock_param array */
+static int ubiblock_devs __initdata;
+
+/* MTD devices specification parameters */
+static struct ubiblock_param ubiblock_param[UBIBLOCK_MAX_DEVICES] __initdata;
+
+struct ubiblock {
+	struct ubi_volume_desc *desc;
+	int ubi_num;
+	int vol_id;
+	int refcnt;
+	int leb_size;
+
+	struct gendisk *gd;
+	struct request_queue *rq;
+
+	struct workqueue_struct *wq;
+	struct work_struct work;
+
+	struct mutex dev_mutex;
+	spinlock_t queue_lock;
+	struct list_head list;
+};
+
+/* Linked list of all ubiblock instances */
+static LIST_HEAD(ubiblock_devices);
+static DEFINE_MUTEX(devices_mutex);
+static int ubiblock_major;
+
+static int __init ubiblock_set_param(const char *val,
+				     const struct kernel_param *kp)
+{
+	int i, ret;
+	size_t len;
+	struct ubiblock_param *param;
+	char buf[UBIBLOCK_PARAM_LEN];
+	char *pbuf = &buf[0];
+	char *tokens[UBIBLOCK_PARAM_COUNT];
+
+	if (!val)
+		return -EINVAL;
+
+	len = strnlen(val, UBIBLOCK_PARAM_LEN);
+	if (len == 0) {
+		ubi_warn("block: empty 'block=' parameter - ignored\n");
+		return 0;
+	}
+
+	if (len == UBIBLOCK_PARAM_LEN) {
+		ubi_err("block: parameter \"%s\" is too long, max. is %d\n",
+			val, UBIBLOCK_PARAM_LEN);
+		return -EINVAL;
+	}
+
+	strcpy(buf, val);
+
+	/* Get rid of the final newline */
+	if (buf[len - 1] == '\n')
+		buf[len - 1] = '\0';
+
+	for (i = 0; i < UBIBLOCK_PARAM_COUNT; i++)
+		tokens[i] = strsep(&pbuf, ",");
+
+	param = &ubiblock_param[ubiblock_devs];
+	if (tokens[1]) {
+		/* Two parameters: can be 'ubi, vol_id' or 'ubi, vol_name' */
+		ret = kstrtoint(tokens[0], 10, &param->ubi_num);
+		if (ret < 0)
+			return -EINVAL;
+
+		/* Second param can be a number or a name */
+		ret = kstrtoint(tokens[1], 10, &param->vol_id);
+		if (ret < 0) {
+			param->vol_id = -1;
+			strcpy(param->name, tokens[1]);
+		}
+
+	} else {
+		/* One parameter: must be device path */
+		strcpy(param->name, tokens[0]);
+		param->ubi_num = -1;
+		param->vol_id = -1;
+	}
+
+	ubiblock_devs++;
+
+	return 0;
+}
+
+static struct kernel_param_ops ubiblock_param_ops = {
+	.set    = ubiblock_set_param,
+};
+module_param_cb(block, &ubiblock_param_ops, NULL, 0);
+MODULE_PARM_DESC(block, "Attach block devices to UBI volumes. Parameter format: block=<path|dev,num|dev,name>.\n"
+			"Multiple \"block\" parameters may be specified.\n"
+			"UBI volumes may be specified by their number, name, or path to the device node.\n"
+			"Examples\n"
+			"Using the UBI volume path:\n"
+			"ubi.block=/dev/ubi0_0\n"
+			"Using the UBI device, and the volume name:\n"
+			"ubi.block=0,rootfs\n"
+			"Using both UBI device number and UBI volume number:\n"
+			"ubi.block=0,0\n");
+
+static struct ubiblock *find_dev_nolock(int ubi_num, int vol_id)
+{
+	struct ubiblock *dev;
+
+	list_for_each_entry(dev, &ubiblock_devices, list)
+		if (dev->ubi_num == ubi_num && dev->vol_id == vol_id)
+			return dev;
+	return NULL;
+}
+
+static int ubiblock_read_to_buf(struct ubiblock *dev, char *buffer,
+				int leb, int offset, int len)
+{
+	int ret;
+
+	ret = ubi_read(dev->desc, leb, buffer, offset, len);
+	if (ret) {
+		ubi_err("%s ubi_read error %d",
+			dev->gd->disk_name, ret);
+		return ret;
+	}
+	return 0;
+}
+
+static int ubiblock_read(struct ubiblock *dev, char *buffer,
+			 sector_t sec, int len)
+{
+	int ret, leb, offset;
+	int bytes_left = len;
+	int to_read = len;
+	u64 pos = sec << 9;
+
+	/* Get LEB:offset address to read from */
+	offset = do_div(pos, dev->leb_size);
+	leb = pos;
+
+	while (bytes_left) {
+		/*
+		 * We can only read one LEB at a time. Therefore if the read
+		 * length is larger than one LEB size, we split the operation.
+		 */
+		if (offset + to_read > dev->leb_size)
+			to_read = dev->leb_size - offset;
+
+		ret = ubiblock_read_to_buf(dev, buffer, leb, offset, to_read);
+		if (ret)
+			return ret;
+
+		buffer += to_read;
+		bytes_left -= to_read;
+		to_read = bytes_left;
+		leb += 1;
+		offset = 0;
+	}
+	return 0;
+}
+
+static int do_ubiblock_request(struct ubiblock *dev, struct request *req)
+{
+	int len, ret;
+	sector_t sec;
+
+	if (req->cmd_type != REQ_TYPE_FS)
+		return -EIO;
+
+	if (blk_rq_pos(req) + blk_rq_cur_sectors(req) >
+	    get_capacity(req->rq_disk))
+		return -EIO;
+
+	if (rq_data_dir(req) != READ)
+		return -ENOSYS; /* Write not implemented */
+
+	sec = blk_rq_pos(req);
+	len = blk_rq_cur_bytes(req);
+
+	/*
+	 * Let's prevent the device from being removed while we're doing I/O
+	 * work. Notice that this means we serialize all the I/O operations,
+	 * but it's probably of no impact given the NAND core serializes
+	 * flash access anyway.
+	 */
+	mutex_lock(&dev->dev_mutex);
+	ret = ubiblock_read(dev, bio_data(req->bio), sec, len);
+	mutex_unlock(&dev->dev_mutex);
+
+	return ret;
+}
+
+static void ubiblock_do_work(struct work_struct *work)
+{
+	struct ubiblock *dev =
+		container_of(work, struct ubiblock, work);
+	struct request_queue *rq = dev->rq;
+	struct request *req;
+	int res;
+
+	spin_lock_irq(rq->queue_lock);
+
+	req = blk_fetch_request(rq);
+	while (req) {
+
+		spin_unlock_irq(rq->queue_lock);
+		res = do_ubiblock_request(dev, req);
+		spin_lock_irq(rq->queue_lock);
+
+		/*
+		 * If we're done with this request,
+		 * we need to fetch a new one
+		 */
+		if (!__blk_end_request_cur(req, res))
+			req = blk_fetch_request(rq);
+	}
+
+	spin_unlock_irq(rq->queue_lock);
+}
+
+static void ubiblock_request(struct request_queue *rq)
+{
+	struct ubiblock *dev;
+	struct request *req;
+
+	dev = rq->queuedata;
+
+	if (!dev)
+		while ((req = blk_fetch_request(rq)) != NULL)
+			__blk_end_request_all(req, -ENODEV);
+	else
+		queue_work(dev->wq, &dev->work);
+}
+
+static int ubiblock_open(struct block_device *bdev, fmode_t mode)
+{
+	struct ubiblock *dev = bdev->bd_disk->private_data;
+	int ret;
+
+	mutex_lock(&dev->dev_mutex);
+	if (dev->refcnt > 0) {
+		/*
+		 * The volume is already open, just increase the reference
+		 * counter.
+		 */
+		goto out_done;
+	}
+
+	/*
+	 * We want users to be aware they should only mount us as read-only.
+	 * It's just a paranoid check, as write requests will get rejected
+	 * in any case.
+	 */
+	if (mode & FMODE_WRITE) {
+		ret = -EPERM;
+		goto out_unlock;
+	}
+
+	dev->desc = ubi_open_volume(dev->ubi_num, dev->vol_id, UBI_READONLY);
+	if (IS_ERR(dev->desc)) {
+		ubi_err("%s failed to open ubi volume %d_%d",
+			dev->gd->disk_name, dev->ubi_num, dev->vol_id);
+		ret = PTR_ERR(dev->desc);
+		dev->desc = NULL;
+		goto out_unlock;
+	}
+
+out_done:
+	dev->refcnt++;
+	mutex_unlock(&dev->dev_mutex);
+	return 0;
+
+out_unlock:
+	mutex_unlock(&dev->dev_mutex);
+	return ret;
+}
+
+static void ubiblock_release(struct gendisk *gd, fmode_t mode)
+{
+	struct ubiblock *dev = gd->private_data;
+
+	mutex_lock(&dev->dev_mutex);
+	dev->refcnt--;
+	if (dev->refcnt == 0) {
+		ubi_close_volume(dev->desc);
+		dev->desc = NULL;
+	}
+	mutex_unlock(&dev->dev_mutex);
+}
+
+static int ubiblock_getgeo(struct block_device *bdev, struct hd_geometry *geo)
+{
+	/* Some tools might require this information */
+	geo->heads = 1;
+	geo->cylinders = 1;
+	geo->sectors = get_capacity(bdev->bd_disk);
+	geo->start = 0;
+	return 0;
+}
+
+static const struct block_device_operations ubiblock_ops = {
+	.owner = THIS_MODULE,
+	.open = ubiblock_open,
+	.release = ubiblock_release,
+	.getgeo	= ubiblock_getgeo,
+};
+
+int ubiblock_create(struct ubi_volume_info *vi)
+{
+	struct ubiblock *dev;
+	struct gendisk *gd;
+	int disk_capacity;
+	int ret;
+
+	/* Check that the volume isn't already handled */
+	mutex_lock(&devices_mutex);
+	if (find_dev_nolock(vi->ubi_num, vi->vol_id)) {
+		mutex_unlock(&devices_mutex);
+		return -EEXIST;
+	}
+	mutex_unlock(&devices_mutex);
+
+	dev = kzalloc(sizeof(struct ubiblock), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	mutex_init(&dev->dev_mutex);
+
+	dev->ubi_num = vi->ubi_num;
+	dev->vol_id = vi->vol_id;
+	dev->leb_size = vi->usable_leb_size;
+
+	/* Initialize the gendisk of this ubiblock device */
+	gd = alloc_disk(1);
+	if (!gd) {
+		ubi_err("block: alloc_disk failed");
+		ret = -ENODEV;
+		goto out_free_dev;
+	}
+
+	gd->fops = &ubiblock_ops;
+	gd->major = ubiblock_major;
+	gd->first_minor = dev->ubi_num * UBI_MAX_VOLUMES + dev->vol_id;
+	gd->private_data = dev;
+	sprintf(gd->disk_name, "ubiblock%d_%d", dev->ubi_num, dev->vol_id);
+	disk_capacity = (vi->size * vi->usable_leb_size) >> 9;
+	set_capacity(gd, disk_capacity);
+	dev->gd = gd;
+
+	spin_lock_init(&dev->queue_lock);
+	dev->rq = blk_init_queue(ubiblock_request, &dev->queue_lock);
+	if (!dev->rq) {
+		ubi_err("block: blk_init_queue failed");
+		ret = -ENODEV;
+		goto out_put_disk;
+	}
+
+	dev->rq->queuedata = dev;
+	dev->gd->queue = dev->rq;
+
+	/*
+	 * Create one workqueue per volume (per registered block device).
+	 * Rembember workqueues are cheap, they're not threads.
+	 */
+	dev->wq = alloc_workqueue("%s", 0, 0, gd->disk_name);
+	if (!dev->wq) {
+		ret = -ENOMEM;
+		goto out_free_queue;
+	}
+	INIT_WORK(&dev->work, ubiblock_do_work);
+
+	mutex_lock(&devices_mutex);
+	list_add_tail(&dev->list, &ubiblock_devices);
+	mutex_unlock(&devices_mutex);
+
+	/* Must be the last step: anyone can call file ops from now on */
+	add_disk(dev->gd);
+	ubi_msg("%s created from ubi%d:%d(%s)",
+		dev->gd->disk_name, dev->ubi_num, dev->vol_id, vi->name);
+	return 0;
+
+out_free_queue:
+	blk_cleanup_queue(dev->rq);
+out_put_disk:
+	put_disk(dev->gd);
+out_free_dev:
+	kfree(dev);
+
+	return ret;
+}
+
+static void ubiblock_cleanup(struct ubiblock *dev)
+{
+	del_gendisk(dev->gd);
+	blk_cleanup_queue(dev->rq);
+	ubi_msg("%s released", dev->gd->disk_name);
+	put_disk(dev->gd);
+}
+
+int ubiblock_remove(struct ubi_volume_info *vi)
+{
+	struct ubiblock *dev;
+
+	mutex_lock(&devices_mutex);
+	dev = find_dev_nolock(vi->ubi_num, vi->vol_id);
+	if (!dev) {
+		mutex_unlock(&devices_mutex);
+		return -ENODEV;
+	}
+
+	/* Found a device, let's lock it so we can check if it's busy */
+	mutex_lock(&dev->dev_mutex);
+	if (dev->refcnt > 0) {
+		mutex_unlock(&dev->dev_mutex);
+		mutex_unlock(&devices_mutex);
+		return -EBUSY;
+	}
+
+	/* Remove from device list */
+	list_del(&dev->list);
+	mutex_unlock(&devices_mutex);
+
+	/* Flush pending work and stop this workqueue */
+	destroy_workqueue(dev->wq);
+
+	ubiblock_cleanup(dev);
+	mutex_unlock(&dev->dev_mutex);
+	kfree(dev);
+	return 0;
+}
+
+static void ubiblock_resize(struct ubi_volume_info *vi)
+{
+	struct ubiblock *dev;
+	int disk_capacity;
+
+	/*
+	 * Need to lock the device list until we stop using the device,
+	 * otherwise the device struct might get released in
+	 * 'ubiblock_remove()'.
+	 */
+	mutex_lock(&devices_mutex);
+	dev = find_dev_nolock(vi->ubi_num, vi->vol_id);
+	if (!dev) {
+		mutex_unlock(&devices_mutex);
+		return;
+	}
+
+	mutex_lock(&dev->dev_mutex);
+	disk_capacity = (vi->size * vi->usable_leb_size) >> 9;
+	set_capacity(dev->gd, disk_capacity);
+	ubi_msg("%s resized to %d LEBs", dev->gd->disk_name, vi->size);
+	mutex_unlock(&dev->dev_mutex);
+	mutex_unlock(&devices_mutex);
+}
+
+static int ubiblock_notify(struct notifier_block *nb,
+			 unsigned long notification_type, void *ns_ptr)
+{
+	struct ubi_notification *nt = ns_ptr;
+
+	switch (notification_type) {
+	case UBI_VOLUME_ADDED:
+		/*
+		 * We want to enforce explicit block device creation for
+		 * volumes, so when a volume is added we do nothing.
+		 */
+		break;
+	case UBI_VOLUME_REMOVED:
+		ubiblock_remove(&nt->vi);
+		break;
+	case UBI_VOLUME_RESIZED:
+		ubiblock_resize(&nt->vi);
+		break;
+	default:
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block ubiblock_notifier = {
+	.notifier_call = ubiblock_notify,
+};
+
+static struct ubi_volume_desc * __init
+open_volume_desc(const char *name, int ubi_num, int vol_id)
+{
+	if (ubi_num == -1)
+		/* No ubi num, name must be a vol device path */
+		return ubi_open_volume_path(name, UBI_READONLY);
+	else if (vol_id == -1)
+		/* No vol_id, must be vol_name */
+		return ubi_open_volume_nm(ubi_num, name, UBI_READONLY);
+	else
+		return ubi_open_volume(ubi_num, vol_id, UBI_READONLY);
+}
+
+static int __init ubiblock_create_from_param(void)
+{
+	int i, ret;
+	struct ubiblock_param *p;
+	struct ubi_volume_desc *desc;
+	struct ubi_volume_info vi;
+
+	for (i = 0; i < ubiblock_devs; i++) {
+		p = &ubiblock_param[i];
+
+		desc = open_volume_desc(p->name, p->ubi_num, p->vol_id);
+		if (IS_ERR(desc)) {
+			ubi_err("block: can't open volume, err=%ld\n",
+				PTR_ERR(desc));
+			ret = PTR_ERR(desc);
+			break;
+		}
+
+		ubi_get_volume_info(desc, &vi);
+		ubi_close_volume(desc);
+
+		ret = ubiblock_create(&vi);
+		if (ret) {
+			ubi_err("block: can't add '%s' volume, err=%d\n",
+				vi.name, ret);
+			break;
+		}
+	}
+	return ret;
+}
+
+static void ubiblock_remove_all(void)
+{
+	struct ubiblock *next;
+	struct ubiblock *dev;
+
+	list_for_each_entry_safe(dev, next, &ubiblock_devices, list) {
+		/* Flush pending work and stop workqueue */
+		destroy_workqueue(dev->wq);
+		/* The module is being forcefully removed */
+		WARN_ON(dev->desc);
+		/* Remove from device list */
+		list_del(&dev->list);
+		ubiblock_cleanup(dev);
+		kfree(dev);
+	}
+}
+
+int __init ubiblock_init(void)
+{
+	int ret;
+
+	ubiblock_major = register_blkdev(0, "ubiblock");
+	if (ubiblock_major < 0)
+		return ubiblock_major;
+
+	/* Attach block devices from 'block=' module param */
+	ret = ubiblock_create_from_param();
+	if (ret)
+		goto err_remove;
+
+	/*
+	 * Block devices are only created upon user requests, so we ignore
+	 * existing volumes.
+	 */
+	ret = ubi_register_volume_notifier(&ubiblock_notifier, 1);
+	if (ret)
+		goto err_unreg;
+	return 0;
+
+err_unreg:
+	unregister_blkdev(ubiblock_major, "ubiblock");
+err_remove:
+	ubiblock_remove_all();
+	return ret;
+}
+
+void __exit ubiblock_exit(void)
+{
+	ubi_unregister_volume_notifier(&ubiblock_notifier);
+	ubiblock_remove_all();
+	unregister_blkdev(ubiblock_major, "ubiblock");
+}
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 13b05cb33b0..6e30a3c280d 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -27,10 +27,6 @@
  * module load parameters or the kernel boot parameters. If MTD devices were
  * specified, UBI does not attach any MTD device, but it is possible to do
  * later using the "UBI control device".
- *
- * At the moment we only attach UBI devices by scanning, which will become a
- * bottleneck when flashes reach certain large size. Then one may improve UBI
- * and add other methods, although it does not seem to be easy to do.
  */
 
 #include <linux/err.h>
@@ -40,15 +36,23 @@
 #include <linux/namei.h>
 #include <linux/stat.h>
 #include <linux/miscdevice.h>
+#include <linux/mtd/partitions.h>
 #include <linux/log2.h>
 #include <linux/kthread.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/major.h>
 #include "ubi.h"
 
 /* Maximum length of the 'mtd=' parameter */
 #define MTD_PARAM_LEN_MAX 64
 
+/* Maximum number of comma-separated items in the 'mtd=' parameter */
+#define MTD_PARAM_MAX_COUNT 4
+
+/* Maximum value for the number of bad PEBs per 1024 PEBs */
+#define MAX_MTD_UBI_BEB_LIMIT 768
+
 #ifdef CONFIG_MTD_UBI_MODULE
 #define ubi_is_module() 1
 #else
@@ -60,10 +64,13 @@
  * @name: MTD character device node path, MTD device name, or MTD device number
  *        string
  * @vid_hdr_offs: VID header offset
+ * @max_beb_per1024: maximum expected number of bad PEBs per 1024 PEBs
  */
 struct mtd_dev_param {
 	char name[MTD_PARAM_LEN_MAX];
+	int ubi_num;
 	int vid_hdr_offs;
+	int max_beb_per1024;
 };
 
 /* Numbers of elements set in the @mtd_dev_param array */
@@ -71,7 +78,10 @@ static int __initdata mtd_devs;
 
 /* MTD devices specification parameters */
 static struct mtd_dev_param __initdata mtd_dev_param[UBI_MAX_DEVICES];
-
+#ifdef CONFIG_MTD_UBI_FASTMAP
+/* UBI module parameter to enable fastmap automatically on non-fastmap images */
+static bool fm_autoconvert;
+#endif
 /* Root UBI "class" object (corresponds to '/<sysfs>/class/ubi/') */
 struct class *ubi_class;
 
@@ -95,8 +105,8 @@ DEFINE_MUTEX(ubi_devices_mutex);
 static DEFINE_SPINLOCK(ubi_devices_lock);
 
 /* "Show" method for files in '/<sysfs>/class/ubi/' */
-static ssize_t ubi_version_show(struct class *class, struct class_attribute *attr,
-				char *buf)
+static ssize_t ubi_version_show(struct class *class,
+				struct class_attribute *attr, char *buf)
 {
 	return sprintf(buf, "%d\n", UBI_VERSION);
 }
@@ -148,6 +158,19 @@ int ubi_volume_notify(struct ubi_device *ubi, struct ubi_volume *vol, int ntype)
 
 	ubi_do_get_device_info(ubi, &nt.di);
 	ubi_do_get_volume_info(ubi, vol, &nt.vi);
+
+#ifdef CONFIG_MTD_UBI_FASTMAP
+	switch (ntype) {
+	case UBI_VOLUME_ADDED:
+	case UBI_VOLUME_REMOVED:
+	case UBI_VOLUME_RESIZED:
+	case UBI_VOLUME_RENAMED:
+		if (ubi_update_fastmap(ubi)) {
+			ubi_err("Unable to update fastmap!");
+			ubi_ro_mode(ubi);
+		}
+	}
+#endif
 	return blocking_notifier_call_chain(&ubi_notifiers, ntype, &nt);
 }
 
@@ -554,10 +577,10 @@ static void uif_close(struct ubi_device *ubi)
 }
 
 /**
- * free_internal_volumes - free internal volumes.
+ * ubi_free_internal_volumes - free internal volumes.
  * @ubi: UBI device description object
  */
-static void free_internal_volumes(struct ubi_device *ubi)
+void ubi_free_internal_volumes(struct ubi_device *ubi)
 {
 	int i;
 
@@ -568,60 +591,38 @@ static void free_internal_volumes(struct ubi_device *ubi)
 	}
 }
 
-/**
- * attach_by_scanning - attach an MTD device using scanning method.
- * @ubi: UBI device descriptor
- *
- * This function returns zero in case of success and a negative error code in
- * case of failure.
- *
- * Note, currently this is the only method to attach UBI devices. Hopefully in
- * the future we'll have more scalable attaching methods and avoid full media
- * scanning. But even in this case scanning will be needed as a fall-back
- * attaching method if there are some on-flash table corruptions.
- */
-static int attach_by_scanning(struct ubi_device *ubi)
+static int get_bad_peb_limit(const struct ubi_device *ubi, int max_beb_per1024)
 {
-	int err;
-	struct ubi_scan_info *si;
-
-	si = ubi_scan(ubi);
-	if (IS_ERR(si))
-		return PTR_ERR(si);
-
-	ubi->bad_peb_count = si->bad_peb_count;
-	ubi->good_peb_count = ubi->peb_count - ubi->bad_peb_count;
-	ubi->max_ec = si->max_ec;
-	ubi->mean_ec = si->mean_ec;
+	int limit, device_pebs;
+	uint64_t device_size;
 
-	err = ubi_read_volume_table(ubi, si);
-	if (err)
-		goto out_si;
-
-	err = ubi_wl_init_scan(ubi, si);
-	if (err)
-		goto out_vtbl;
+	if (!max_beb_per1024)
+		return 0;
 
-	err = ubi_eba_init_scan(ubi, si);
-	if (err)
-		goto out_wl;
+	/*
+	 * Here we are using size of the entire flash chip and
+	 * not just the MTD partition size because the maximum
+	 * number of bad eraseblocks is a percentage of the
+	 * whole device and bad eraseblocks are not fairly
+	 * distributed over the flash chip. So the worst case
+	 * is that all the bad eraseblocks of the chip are in
+	 * the MTD partition we are attaching (ubi->mtd).
+	 */
+	device_size = mtd_get_device_size(ubi->mtd);
+	device_pebs = mtd_div_by_eb(device_size, ubi->mtd);
+	limit = mult_frac(device_pebs, max_beb_per1024, 1024);
 
-	ubi_scan_destroy_si(si);
-	return 0;
+	/* Round it up */
+	if (mult_frac(limit, 1024, max_beb_per1024) < device_pebs)
+		limit += 1;
 
-out_wl:
-	ubi_wl_close(ubi);
-out_vtbl:
-	free_internal_volumes(ubi);
-	vfree(ubi->vtbl);
-out_si:
-	ubi_scan_destroy_si(si);
-	return err;
+	return limit;
 }
 
 /**
  * io_init - initialize I/O sub-system for a given UBI device.
  * @ubi: UBI device description object
+ * @max_beb_per1024: maximum expected number of bad PEB per 1024 PEBs
  *
  * If @ubi->vid_hdr_offset or @ubi->leb_start is zero, default offsets are
  * assumed:
@@ -634,8 +635,11 @@ out_si:
  * This function returns zero in case of success and a negative error code in
  * case of failure.
  */
-static int io_init(struct ubi_device *ubi)
+static int io_init(struct ubi_device *ubi, int max_beb_per1024)
 {
+	dbg_gen("sizeof(struct ubi_ainf_peb) %zu", sizeof(struct ubi_ainf_peb));
+	dbg_gen("sizeof(struct ubi_wl_entry) %zu", sizeof(struct ubi_wl_entry));
+
 	if (ubi->mtd->numeraseregions != 0) {
 		/*
 		 * Some flashes have several erase regions. Different regions
@@ -662,8 +666,10 @@ static int io_init(struct ubi_device *ubi)
 	ubi->peb_count  = mtd_div_by_eb(ubi->mtd->size, ubi->mtd);
 	ubi->flash_size = ubi->mtd->size;
 
-	if (ubi->mtd->block_isbad && ubi->mtd->block_markbad)
+	if (mtd_can_have_bb(ubi->mtd)) {
 		ubi->bad_allowed = 1;
+		ubi->bad_peb_limit = get_bad_peb_limit(ubi, max_beb_per1024);
+	}
 
 	if (ubi->mtd->type == MTD_NORFLASH) {
 		ubi_assert(ubi->mtd->writesize == 1);
@@ -688,14 +694,28 @@ static int io_init(struct ubi_device *ubi)
 	ubi_assert(ubi->hdrs_min_io_size <= ubi->min_io_size);
 	ubi_assert(ubi->min_io_size % ubi->hdrs_min_io_size == 0);
 
+	ubi->max_write_size = ubi->mtd->writebufsize;
+	/*
+	 * Maximum write size has to be greater or equivalent to min. I/O
+	 * size, and be multiple of min. I/O size.
+	 */
+	if (ubi->max_write_size < ubi->min_io_size ||
+	    ubi->max_write_size % ubi->min_io_size ||
+	    !is_power_of_2(ubi->max_write_size)) {
+		ubi_err("bad write buffer size %d for %d min. I/O unit",
+			ubi->max_write_size, ubi->min_io_size);
+		return -EINVAL;
+	}
+
 	/* Calculate default aligned sizes of EC and VID headers */
 	ubi->ec_hdr_alsize = ALIGN(UBI_EC_HDR_SIZE, ubi->hdrs_min_io_size);
 	ubi->vid_hdr_alsize = ALIGN(UBI_VID_HDR_SIZE, ubi->hdrs_min_io_size);
 
-	dbg_msg("min_io_size      %d", ubi->min_io_size);
-	dbg_msg("hdrs_min_io_size %d", ubi->hdrs_min_io_size);
-	dbg_msg("ec_hdr_alsize    %d", ubi->ec_hdr_alsize);
-	dbg_msg("vid_hdr_alsize   %d", ubi->vid_hdr_alsize);
+	dbg_gen("min_io_size      %d", ubi->min_io_size);
+	dbg_gen("max_write_size   %d", ubi->max_write_size);
+	dbg_gen("hdrs_min_io_size %d", ubi->hdrs_min_io_size);
+	dbg_gen("ec_hdr_alsize    %d", ubi->ec_hdr_alsize);
+	dbg_gen("vid_hdr_alsize   %d", ubi->vid_hdr_alsize);
 
 	if (ubi->vid_hdr_offset == 0)
 		/* Default offset */
@@ -709,13 +729,13 @@ static int io_init(struct ubi_device *ubi)
 	}
 
 	/* Similar for the data offset */
-	ubi->leb_start = ubi->vid_hdr_offset + UBI_EC_HDR_SIZE;
+	ubi->leb_start = ubi->vid_hdr_offset + UBI_VID_HDR_SIZE;
 	ubi->leb_start = ALIGN(ubi->leb_start, ubi->min_io_size);
 
-	dbg_msg("vid_hdr_offset   %d", ubi->vid_hdr_offset);
-	dbg_msg("vid_hdr_aloffset %d", ubi->vid_hdr_aloffset);
-	dbg_msg("vid_hdr_shift    %d", ubi->vid_hdr_shift);
-	dbg_msg("leb_start        %d", ubi->leb_start);
+	dbg_gen("vid_hdr_offset   %d", ubi->vid_hdr_offset);
+	dbg_gen("vid_hdr_aloffset %d", ubi->vid_hdr_aloffset);
+	dbg_gen("vid_hdr_shift    %d", ubi->vid_hdr_shift);
+	dbg_gen("leb_start        %d", ubi->leb_start);
 
 	/* The shift must be aligned to 32-bit boundary */
 	if (ubi->vid_hdr_shift % 4) {
@@ -741,7 +761,7 @@ static int io_init(struct ubi_device *ubi)
 	ubi->max_erroneous = ubi->peb_count / 10;
 	if (ubi->max_erroneous < 16)
 		ubi->max_erroneous = 16;
-	dbg_msg("max_erroneous    %d", ubi->max_erroneous);
+	dbg_gen("max_erroneous    %d", ubi->max_erroneous);
 
 	/*
 	 * It may happen that EC and VID headers are situated in one minimal
@@ -749,36 +769,24 @@ static int io_init(struct ubi_device *ubi)
 	 * read-only mode.
 	 */
 	if (ubi->vid_hdr_offset + UBI_VID_HDR_SIZE <= ubi->hdrs_min_io_size) {
-		ubi_warn("EC and VID headers are in the same minimal I/O unit, "
-			 "switch to read-only mode");
+		ubi_warn("EC and VID headers are in the same minimal I/O unit, switch to read-only mode");
 		ubi->ro_mode = 1;
 	}
 
 	ubi->leb_size = ubi->peb_size - ubi->leb_start;
 
 	if (!(ubi->mtd->flags & MTD_WRITEABLE)) {
-		ubi_msg("MTD device %d is write-protected, attach in "
-			"read-only mode", ubi->mtd->index);
+		ubi_msg("MTD device %d is write-protected, attach in read-only mode",
+			ubi->mtd->index);
 		ubi->ro_mode = 1;
 	}
 
-	ubi_msg("physical eraseblock size:   %d bytes (%d KiB)",
-		ubi->peb_size, ubi->peb_size >> 10);
-	ubi_msg("logical eraseblock size:    %d bytes", ubi->leb_size);
-	ubi_msg("smallest flash I/O unit:    %d", ubi->min_io_size);
-	if (ubi->hdrs_min_io_size != ubi->min_io_size)
-		ubi_msg("sub-page size:              %d",
-			ubi->hdrs_min_io_size);
-	ubi_msg("VID header offset:          %d (aligned %d)",
-		ubi->vid_hdr_offset, ubi->vid_hdr_aloffset);
-	ubi_msg("data offset:                %d", ubi->leb_start);
-
 	/*
-	 * Note, ideally, we have to initialize ubi->bad_peb_count here. But
+	 * Note, ideally, we have to initialize @ubi->bad_peb_count here. But
 	 * unfortunately, MTD does not provide this information. We should loop
 	 * over all physical eraseblocks and invoke mtd->block_is_bad() for
-	 * each physical eraseblock. So, we skip ubi->bad_peb_count
-	 * uninitialized and initialize it after scanning.
+	 * each physical eraseblock. So, we leave @ubi->bad_peb_count
+	 * uninitialized so far.
 	 */
 
 	return 0;
@@ -789,7 +797,7 @@ static int io_init(struct ubi_device *ubi)
  * @ubi: UBI device description object
  * @vol_id: ID of the volume to re-size
  *
- * This function re-sizes the volume marked by the @UBI_VTBL_AUTORESIZE_FLG in
+ * This function re-sizes the volume marked by the %UBI_VTBL_AUTORESIZE_FLG in
  * the volume table to the largest possible size. See comments in ubi-header.h
  * for more description of the flag. Returns zero in case of success and a
  * negative error code in case of failure.
@@ -800,6 +808,11 @@ static int autoresize(struct ubi_device *ubi, int vol_id)
 	struct ubi_volume *vol = ubi->volumes[vol_id];
 	int err, old_reserved_pebs = vol->reserved_pebs;
 
+	if (ubi->ro_mode) {
+		ubi_warn("skip auto-resize because of R/O mode");
+		return 0;
+	}
+
 	/*
 	 * Clear the auto-resize flag in the volume in-memory copy of the
 	 * volume table, and 'ubi_resize_volume()' will propagate this change
@@ -814,8 +827,7 @@ static int autoresize(struct ubi_device *ubi, int vol_id)
 		 * No available PEBs to re-size the volume, clear the flag on
 		 * flash and exit.
 		 */
-		memcpy(&vtbl_rec, &ubi->vtbl[vol_id],
-		       sizeof(struct ubi_vtbl_record));
+		vtbl_rec = ubi->vtbl[vol_id];
 		err = ubi_change_vtbl_record(ubi, vol_id, &vtbl_rec);
 		if (err)
 			ubi_err("cannot clean auto-resize flag for volume %d",
@@ -841,6 +853,7 @@ static int autoresize(struct ubi_device *ubi, int vol_id)
  * @mtd: MTD device description object
  * @ubi_num: number to assign to the new UBI device
  * @vid_hdr_offset: VID header offset
+ * @max_beb_per1024: maximum expected number of bad PEB per 1024 PEBs
  *
  * This function attaches MTD device @mtd_dev to UBI and assign @ubi_num number
  * to the newly created UBI device, unless @ubi_num is %UBI_DEV_NUM_AUTO, in
@@ -851,11 +864,18 @@ static int autoresize(struct ubi_device *ubi, int vol_id)
  * Note, the invocations of this function has to be serialized by the
  * @ubi_devices_mutex.
  */
-int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
+int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num,
+		       int vid_hdr_offset, int max_beb_per1024)
 {
 	struct ubi_device *ubi;
 	int i, err, ref = 0;
 
+	if (max_beb_per1024 < 0 || max_beb_per1024 > MAX_MTD_UBI_BEB_LIMIT)
+		return -EINVAL;
+
+	if (!max_beb_per1024)
+		max_beb_per1024 = CONFIG_MTD_UBI_BEB_LIMIT;
+
 	/*
 	 * Check if we already have the same MTD device attached.
 	 *
@@ -865,7 +885,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 	for (i = 0; i < UBI_MAX_DEVICES; i++) {
 		ubi = ubi_devices[i];
 		if (ubi && mtd->index == ubi->mtd->index) {
-			dbg_err("mtd%d is already attached to ubi%d",
+			ubi_err("mtd%d is already attached to ubi%d",
 				mtd->index, i);
 			return -EEXIST;
 		}
@@ -880,8 +900,8 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 	 * no sense to attach emulated MTD devices, so we prohibit this.
 	 */
 	if (mtd->type == MTD_UBIVOLUME) {
-		ubi_err("refuse attaching mtd%d - it is already emulated on "
-			"top of UBI", mtd->index);
+		ubi_err("refuse attaching mtd%d - it is already emulated on top of UBI",
+			mtd->index);
 		return -EINVAL;
 	}
 
@@ -891,7 +911,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 			if (!ubi_devices[ubi_num])
 				break;
 		if (ubi_num == UBI_MAX_DEVICES) {
-			dbg_err("only %d UBI devices may be created",
+			ubi_err("only %d UBI devices may be created",
 				UBI_MAX_DEVICES);
 			return -ENFILE;
 		}
@@ -901,7 +921,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 
 		/* Make sure ubi_num is not busy */
 		if (ubi_devices[ubi_num]) {
-			dbg_err("ubi%d already exists", ubi_num);
+			ubi_err("ubi%d already exists", ubi_num);
 			return -EEXIST;
 		}
 	}
@@ -915,36 +935,61 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 	ubi->vid_hdr_offset = vid_hdr_offset;
 	ubi->autoresize_vol_id = -1;
 
+#ifdef CONFIG_MTD_UBI_FASTMAP
+	ubi->fm_pool.used = ubi->fm_pool.size = 0;
+	ubi->fm_wl_pool.used = ubi->fm_wl_pool.size = 0;
+
+	/*
+	 * fm_pool.max_size is 5% of the total number of PEBs but it's also
+	 * between UBI_FM_MAX_POOL_SIZE and UBI_FM_MIN_POOL_SIZE.
+	 */
+	ubi->fm_pool.max_size = min(((int)mtd_div_by_eb(ubi->mtd->size,
+		ubi->mtd) / 100) * 5, UBI_FM_MAX_POOL_SIZE);
+	if (ubi->fm_pool.max_size < UBI_FM_MIN_POOL_SIZE)
+		ubi->fm_pool.max_size = UBI_FM_MIN_POOL_SIZE;
+
+	ubi->fm_wl_pool.max_size = UBI_FM_WL_POOL_SIZE;
+	ubi->fm_disabled = !fm_autoconvert;
+
+	if (!ubi->fm_disabled && (int)mtd_div_by_eb(ubi->mtd->size, ubi->mtd)
+	    <= UBI_FM_MAX_START) {
+		ubi_err("More than %i PEBs are needed for fastmap, sorry.",
+			UBI_FM_MAX_START);
+		ubi->fm_disabled = 1;
+	}
+
+	ubi_msg("default fastmap pool size: %d", ubi->fm_pool.max_size);
+	ubi_msg("default fastmap WL pool size: %d", ubi->fm_wl_pool.max_size);
+#else
+	ubi->fm_disabled = 1;
+#endif
 	mutex_init(&ubi->buf_mutex);
 	mutex_init(&ubi->ckvol_mutex);
 	mutex_init(&ubi->device_mutex);
 	spin_lock_init(&ubi->volumes_lock);
+	mutex_init(&ubi->fm_mutex);
+	init_rwsem(&ubi->fm_sem);
 
 	ubi_msg("attaching mtd%d to ubi%d", mtd->index, ubi_num);
 
-	err = io_init(ubi);
+	err = io_init(ubi, max_beb_per1024);
 	if (err)
 		goto out_free;
 
 	err = -ENOMEM;
-	ubi->peb_buf1 = vmalloc(ubi->peb_size);
-	if (!ubi->peb_buf1)
-		goto out_free;
-
-	ubi->peb_buf2 = vmalloc(ubi->peb_size);
-	if (!ubi->peb_buf2)
+	ubi->peb_buf = vmalloc(ubi->peb_size);
+	if (!ubi->peb_buf)
 		goto out_free;
 
-#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
-	mutex_init(&ubi->dbg_buf_mutex);
-	ubi->dbg_peb_buf = vmalloc(ubi->peb_size);
-	if (!ubi->dbg_peb_buf)
+#ifdef CONFIG_MTD_UBI_FASTMAP
+	ubi->fm_size = ubi_calc_fm_size(ubi);
+	ubi->fm_buf = vzalloc(ubi->fm_size);
+	if (!ubi->fm_buf)
 		goto out_free;
 #endif
-
-	err = attach_by_scanning(ubi);
+	err = ubi_attach(ubi, 0);
 	if (err) {
-		dbg_err("failed to attach by scanning, error %d", err);
+		ubi_err("failed to attach mtd%d, error %d", mtd->index, err);
 		goto out_free;
 	}
 
@@ -958,38 +1003,43 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 	if (err)
 		goto out_detach;
 
-	ubi->bgt_thread = kthread_create(ubi_thread, ubi, ubi->bgt_name);
+	err = ubi_debugfs_init_dev(ubi);
+	if (err)
+		goto out_uif;
+
+	ubi->bgt_thread = kthread_create(ubi_thread, ubi, "%s", ubi->bgt_name);
 	if (IS_ERR(ubi->bgt_thread)) {
 		err = PTR_ERR(ubi->bgt_thread);
 		ubi_err("cannot spawn \"%s\", error %d", ubi->bgt_name,
 			err);
-		goto out_uif;
+		goto out_debugfs;
 	}
 
-	ubi_msg("attached mtd%d to ubi%d", mtd->index, ubi_num);
-	ubi_msg("MTD device name:            \"%s\"", mtd->name);
-	ubi_msg("MTD device size:            %llu MiB", ubi->flash_size >> 20);
-	ubi_msg("number of good PEBs:        %d", ubi->good_peb_count);
-	ubi_msg("number of bad PEBs:         %d", ubi->bad_peb_count);
-	ubi_msg("max. allowed volumes:       %d", ubi->vtbl_slots);
-	ubi_msg("wear-leveling threshold:    %d", CONFIG_MTD_UBI_WL_THRESHOLD);
-	ubi_msg("number of internal volumes: %d", UBI_INT_VOL_COUNT);
-	ubi_msg("number of user volumes:     %d",
-		ubi->vol_count - UBI_INT_VOL_COUNT);
-	ubi_msg("available PEBs:             %d", ubi->avail_pebs);
-	ubi_msg("total number of reserved PEBs: %d", ubi->rsvd_pebs);
-	ubi_msg("number of PEBs reserved for bad PEB handling: %d",
-		ubi->beb_rsvd_pebs);
-	ubi_msg("max/mean erase counter: %d/%d", ubi->max_ec, ubi->mean_ec);
-	ubi_msg("image sequence number: %d", ubi->image_seq);
+	ubi_msg("attached mtd%d (name \"%s\", size %llu MiB) to ubi%d",
+		mtd->index, mtd->name, ubi->flash_size >> 20, ubi_num);
+	ubi_msg("PEB size: %d bytes (%d KiB), LEB size: %d bytes",
+		ubi->peb_size, ubi->peb_size >> 10, ubi->leb_size);
+	ubi_msg("min./max. I/O unit sizes: %d/%d, sub-page size %d",
+		ubi->min_io_size, ubi->max_write_size, ubi->hdrs_min_io_size);
+	ubi_msg("VID header offset: %d (aligned %d), data offset: %d",
+		ubi->vid_hdr_offset, ubi->vid_hdr_aloffset, ubi->leb_start);
+	ubi_msg("good PEBs: %d, bad PEBs: %d, corrupted PEBs: %d",
+		ubi->good_peb_count, ubi->bad_peb_count, ubi->corr_peb_count);
+	ubi_msg("user volume: %d, internal volumes: %d, max. volumes count: %d",
+		ubi->vol_count - UBI_INT_VOL_COUNT, UBI_INT_VOL_COUNT,
+		ubi->vtbl_slots);
+	ubi_msg("max/mean erase counter: %d/%d, WL threshold: %d, image sequence number: %u",
+		ubi->max_ec, ubi->mean_ec, CONFIG_MTD_UBI_WL_THRESHOLD,
+		ubi->image_seq);
+	ubi_msg("available PEBs: %d, total reserved PEBs: %d, PEBs reserved for bad PEB handling: %d",
+		ubi->avail_pebs, ubi->rsvd_pebs, ubi->beb_rsvd_pebs);
 
 	/*
 	 * The below lock makes sure we do not race with 'ubi_thread()' which
 	 * checks @ubi->thread_enabled. Otherwise we may fail to wake it up.
 	 */
 	spin_lock(&ubi->wl_lock);
-	if (!DBG_DISABLE_BGT)
-		ubi->thread_enabled = 1;
+	ubi->thread_enabled = 1;
 	wake_up_process(ubi->bgt_thread);
 	spin_unlock(&ubi->wl_lock);
 
@@ -997,18 +1047,19 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 	ubi_notify_all(ubi, UBI_VOLUME_ADDED, NULL);
 	return ubi_num;
 
+out_debugfs:
+	ubi_debugfs_exit_dev(ubi);
 out_uif:
+	get_device(&ubi->dev);
+	ubi_assert(ref);
 	uif_close(ubi);
 out_detach:
 	ubi_wl_close(ubi);
-	free_internal_volumes(ubi);
+	ubi_free_internal_volumes(ubi);
 	vfree(ubi->vtbl);
 out_free:
-	vfree(ubi->peb_buf1);
-	vfree(ubi->peb_buf2);
-#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
-	vfree(ubi->dbg_peb_buf);
-#endif
+	vfree(ubi->peb_buf);
+	vfree(ubi->fm_buf);
 	if (ref)
 		put_device(&ubi->dev);
 	else
@@ -1057,8 +1108,12 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway)
 
 	ubi_assert(ubi_num == ubi->ubi_num);
 	ubi_notify_all(ubi, UBI_VOLUME_REMOVED, NULL);
-	dbg_msg("detaching mtd%d from ubi%d", ubi->mtd->index, ubi_num);
-
+	ubi_msg("detaching mtd%d from ubi%d", ubi->mtd->index, ubi_num);
+#ifdef CONFIG_MTD_UBI_FASTMAP
+	/* If we don't write a new fastmap at detach time we lose all
+	 * EC updates that have been made since the last written fastmap. */
+	ubi_update_fastmap(ubi);
+#endif
 	/*
 	 * Before freeing anything, we have to stop the background thread to
 	 * prevent it from doing anything on this device while we are freeing.
@@ -1072,16 +1127,15 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway)
 	 */
 	get_device(&ubi->dev);
 
+	ubi_debugfs_exit_dev(ubi);
 	uif_close(ubi);
+
 	ubi_wl_close(ubi);
-	free_internal_volumes(ubi);
+	ubi_free_internal_volumes(ubi);
 	vfree(ubi->vtbl);
 	put_mtd_device(ubi->mtd);
-	vfree(ubi->peb_buf1);
-	vfree(ubi->peb_buf2);
-#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
-	vfree(ubi->dbg_peb_buf);
-#endif
+	vfree(ubi->peb_buf);
+	vfree(ubi->fm_buf);
 	ubi_msg("mtd%d is detached from ubi%d", ubi->mtd->index, ubi->ubi_num);
 	put_device(&ubi->dev);
 	return 0;
@@ -1191,8 +1245,15 @@ static int __init ubi_init(void)
 	ubi_wl_entry_slab = kmem_cache_create("ubi_wl_entry_slab",
 					      sizeof(struct ubi_wl_entry),
 					      0, 0, NULL);
-	if (!ubi_wl_entry_slab)
+	if (!ubi_wl_entry_slab) {
+		err = -ENOMEM;
 		goto out_dev_unreg;
+	}
+
+	err = ubi_debugfs_init();
+	if (err)
+		goto out_slab;
+
 
 	/* Attach MTD devices */
 	for (i = 0; i < mtd_devs; i++) {
@@ -1204,12 +1265,16 @@ static int __init ubi_init(void)
 		mtd = open_mtd_device(p->name);
 		if (IS_ERR(mtd)) {
 			err = PTR_ERR(mtd);
-			goto out_detach;
+			ubi_err("cannot open mtd %s, error %d", p->name, err);
+			/* See comment below re-ubi_is_module(). */
+			if (ubi_is_module())
+				goto out_detach;
+			continue;
 		}
 
 		mutex_lock(&ubi_devices_mutex);
-		err = ubi_attach_mtd_dev(mtd, UBI_DEV_NUM_AUTO,
-					 p->vid_hdr_offs);
+		err = ubi_attach_mtd_dev(mtd, p->ubi_num,
+					 p->vid_hdr_offs, p->max_beb_per1024);
 		mutex_unlock(&ubi_devices_mutex);
 		if (err < 0) {
 			ubi_err("cannot attach mtd%d", mtd->index);
@@ -1233,6 +1298,15 @@ static int __init ubi_init(void)
 		}
 	}
 
+	err = ubiblock_init();
+	if (err) {
+		ubi_err("block: cannot initialize, error %d", err);
+
+		/* See comment above re-ubi_is_module(). */
+		if (ubi_is_module())
+			goto out_detach;
+	}
+
 	return 0;
 
 out_detach:
@@ -1242,6 +1316,8 @@ out_detach:
 			ubi_detach_mtd_dev(ubi_devices[k]->ubi_num, 1);
 			mutex_unlock(&ubi_devices_mutex);
 		}
+	ubi_debugfs_exit();
+out_slab:
 	kmem_cache_destroy(ubi_wl_entry_slab);
 out_dev_unreg:
 	misc_deregister(&ubi_ctrl_cdev);
@@ -1250,21 +1326,24 @@ out_version:
 out_class:
 	class_destroy(ubi_class);
 out:
-	ubi_err("UBI error: cannot initialize UBI, error %d", err);
+	ubi_err("cannot initialize UBI, error %d", err);
 	return err;
 }
-module_init(ubi_init);
+late_initcall(ubi_init);
 
 static void __exit ubi_exit(void)
 {
 	int i;
 
+	ubiblock_exit();
+
 	for (i = 0; i < UBI_MAX_DEVICES; i++)
 		if (ubi_devices[i]) {
 			mutex_lock(&ubi_devices_mutex);
 			ubi_detach_mtd_dev(ubi_devices[i]->ubi_num, 1);
 			mutex_unlock(&ubi_devices_mutex);
 		}
+	ubi_debugfs_exit();
 	kmem_cache_destroy(ubi_wl_entry_slab);
 	misc_deregister(&ubi_ctrl_cdev);
 	class_remove_file(ubi_class, &ubi_version);
@@ -1286,8 +1365,7 @@ static int __init bytes_str_to_int(const char *str)
 
 	result = simple_strtoul(str, &endp, 0);
 	if (str == endp || result >= INT_MAX) {
-		printk(KERN_ERR "UBI error: incorrect bytes count: \"%s\"\n",
-		       str);
+		ubi_err("incorrect bytes count: \"%s\"\n", str);
 		return -EINVAL;
 	}
 
@@ -1303,8 +1381,7 @@ static int __init bytes_str_to_int(const char *str)
 	case '\0':
 		break;
 	default:
-		printk(KERN_ERR "UBI error: incorrect bytes count: \"%s\"\n",
-		       str);
+		ubi_err("incorrect bytes count: \"%s\"\n", str);
 		return -EINVAL;
 	}
 
@@ -1325,27 +1402,26 @@ static int __init ubi_mtd_param_parse(const char *val, struct kernel_param *kp)
 	struct mtd_dev_param *p;
 	char buf[MTD_PARAM_LEN_MAX];
 	char *pbuf = &buf[0];
-	char *tokens[2] = {NULL, NULL};
+	char *tokens[MTD_PARAM_MAX_COUNT], *token;
 
 	if (!val)
 		return -EINVAL;
 
 	if (mtd_devs == UBI_MAX_DEVICES) {
-		printk(KERN_ERR "UBI error: too many parameters, max. is %d\n",
-		       UBI_MAX_DEVICES);
+		ubi_err("too many parameters, max. is %d\n",
+			UBI_MAX_DEVICES);
 		return -EINVAL;
 	}
 
 	len = strnlen(val, MTD_PARAM_LEN_MAX);
 	if (len == MTD_PARAM_LEN_MAX) {
-		printk(KERN_ERR "UBI error: parameter \"%s\" is too long, "
-		       "max. is %d\n", val, MTD_PARAM_LEN_MAX);
+		ubi_err("parameter \"%s\" is too long, max. is %d\n",
+			val, MTD_PARAM_LEN_MAX);
 		return -EINVAL;
 	}
 
 	if (len == 0) {
-		printk(KERN_WARNING "UBI warning: empty 'mtd=' parameter - "
-		       "ignored\n");
+		pr_warn("UBI warning: empty 'mtd=' parameter - ignored\n");
 		return 0;
 	}
 
@@ -1355,42 +1431,69 @@ static int __init ubi_mtd_param_parse(const char *val, struct kernel_param *kp)
 	if (buf[len - 1] == '\n')
 		buf[len - 1] = '\0';
 
-	for (i = 0; i < 2; i++)
+	for (i = 0; i < MTD_PARAM_MAX_COUNT; i++)
 		tokens[i] = strsep(&pbuf, ",");
 
 	if (pbuf) {
-		printk(KERN_ERR "UBI error: too many arguments at \"%s\"\n",
-		       val);
+		ubi_err("too many arguments at \"%s\"\n", val);
 		return -EINVAL;
 	}
 
 	p = &mtd_dev_param[mtd_devs];
 	strcpy(&p->name[0], tokens[0]);
 
-	if (tokens[1])
-		p->vid_hdr_offs = bytes_str_to_int(tokens[1]);
+	token = tokens[1];
+	if (token) {
+		p->vid_hdr_offs = bytes_str_to_int(token);
+
+		if (p->vid_hdr_offs < 0)
+			return p->vid_hdr_offs;
+	}
+
+	token = tokens[2];
+	if (token) {
+		int err = kstrtoint(token, 10, &p->max_beb_per1024);
+
+		if (err) {
+			ubi_err("bad value for max_beb_per1024 parameter: %s",
+				token);
+			return -EINVAL;
+		}
+	}
 
-	if (p->vid_hdr_offs < 0)
-		return p->vid_hdr_offs;
+	token = tokens[3];
+	if (token) {
+		int err = kstrtoint(token, 10, &p->ubi_num);
+
+		if (err) {
+			ubi_err("bad value for ubi_num parameter: %s", token);
+			return -EINVAL;
+		}
+	} else
+		p->ubi_num = UBI_DEV_NUM_AUTO;
 
 	mtd_devs += 1;
 	return 0;
 }
 
 module_param_call(mtd, ubi_mtd_param_parse, NULL, NULL, 000);
-MODULE_PARM_DESC(mtd, "MTD devices to attach. Parameter format: "
-		      "mtd=<name|num|path>[,<vid_hdr_offs>].\n"
+MODULE_PARM_DESC(mtd, "MTD devices to attach. Parameter format: mtd=<name|num|path>[,<vid_hdr_offs>[,max_beb_per1024[,ubi_num]]].\n"
 		      "Multiple \"mtd\" parameters may be specified.\n"
-		      "MTD devices may be specified by their number, name, or "
-		      "path to the MTD character device node.\n"
-		      "Optional \"vid_hdr_offs\" parameter specifies UBI VID "
-		      "header position to be used by UBI.\n"
-		      "Example 1: mtd=/dev/mtd0 - attach MTD device "
-		      "/dev/mtd0.\n"
-		      "Example 2: mtd=content,1984 mtd=4 - attach MTD device "
-		      "with name \"content\" using VID header offset 1984, and "
-		      "MTD device number 4 with default VID header offset.");
-
+		      "MTD devices may be specified by their number, name, or path to the MTD character device node.\n"
+		      "Optional \"vid_hdr_offs\" parameter specifies UBI VID header position to be used by UBI. (default value if 0)\n"
+		      "Optional \"max_beb_per1024\" parameter specifies the maximum expected bad eraseblock per 1024 eraseblocks. (default value ("
+		      __stringify(CONFIG_MTD_UBI_BEB_LIMIT) ") if 0)\n"
+		      "Optional \"ubi_num\" parameter specifies UBI device number which have to be assigned to the newly created UBI device (assigned automatically by default)\n"
+		      "\n"
+		      "Example 1: mtd=/dev/mtd0 - attach MTD device /dev/mtd0.\n"
+		      "Example 2: mtd=content,1984 mtd=4 - attach MTD device with name \"content\" using VID header offset 1984, and MTD device number 4 with default VID header offset.\n"
+		      "Example 3: mtd=/dev/mtd1,0,25 - attach MTD device /dev/mtd1 using default VID header offset and reserve 25*nand_size_in_blocks/1024 erase blocks for bad block handling.\n"
+		      "Example 4: mtd=/dev/mtd1,0,0,5 - attach MTD device /dev/mtd1 to UBI 5 and using default values for the other fields.\n"
+		      "\t(e.g. if the NAND *chipset* has 4096 PEB, 100 will be reserved for this UBI device).");
+#ifdef CONFIG_MTD_UBI_FASTMAP
+module_param(fm_autoconvert, bool, 0644);
+MODULE_PARM_DESC(fm_autoconvert, "Set this parameter to enable fastmap automatically on images without a fastmap.");
+#endif
 MODULE_VERSION(__stringify(UBI_VERSION));
 MODULE_DESCRIPTION("UBI - Unsorted Block Images");
 MODULE_AUTHOR("Artem Bityutskiy");
diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c
index 4dfa6b90c21..7646220ca6e 100644
--- a/drivers/mtd/ubi/cdev.c
+++ b/drivers/mtd/ubi/cdev.c
@@ -63,7 +63,7 @@ static int get_exclusive(struct ubi_volume_desc *desc)
 	users = vol->readers + vol->writers + vol->exclusive;
 	ubi_assert(users > 0);
 	if (users > 1) {
-		dbg_err("%d users for volume %d", users, vol->vol_id);
+		ubi_err("%d users for volume %d", users, vol->vol_id);
 		err = -EBUSY;
 	} else {
 		vol->readers = vol->writers = 0;
@@ -115,7 +115,7 @@ static int vol_cdev_open(struct inode *inode, struct file *file)
 		mode = UBI_READONLY;
 
 	dbg_gen("open device %d, volume %d, mode %d",
-	        ubi_num, vol_id, mode);
+		ubi_num, vol_id, mode);
 
 	desc = ubi_open_volume(ubi_num, vol_id, mode);
 	if (IS_ERR(desc))
@@ -140,9 +140,9 @@ static int vol_cdev_release(struct inode *inode, struct file *file)
 		vol->updating = 0;
 		vfree(vol->upd_buf);
 	} else if (vol->changing_leb) {
-		dbg_gen("only %lld of %lld bytes received for atomic LEB change"
-			" for volume %d:%d, cancel", vol->upd_received,
-			vol->upd_bytes, vol->ubi->ubi_num, vol->vol_id);
+		dbg_gen("only %lld of %lld bytes received for atomic LEB change for volume %d:%d, cancel",
+			vol->upd_received, vol->upd_bytes, vol->ubi->ubi_num,
+			vol->vol_id);
 		vol->changing_leb = 0;
 		vfree(vol->upd_buf);
 	}
@@ -155,46 +155,27 @@ static loff_t vol_cdev_llseek(struct file *file, loff_t offset, int origin)
 {
 	struct ubi_volume_desc *desc = file->private_data;
 	struct ubi_volume *vol = desc->vol;
-	loff_t new_offset;
 
 	if (vol->updating) {
-		 /* Update is in progress, seeking is prohibited */
-		dbg_err("updating");
+		/* Update is in progress, seeking is prohibited */
+		ubi_err("updating");
 		return -EBUSY;
 	}
 
-	switch (origin) {
-	case 0: /* SEEK_SET */
-		new_offset = offset;
-		break;
-	case 1: /* SEEK_CUR */
-		new_offset = file->f_pos + offset;
-		break;
-	case 2: /* SEEK_END */
-		new_offset = vol->used_bytes + offset;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (new_offset < 0 || new_offset > vol->used_bytes) {
-		dbg_err("bad seek %lld", new_offset);
-		return -EINVAL;
-	}
-
-	dbg_gen("seek volume %d, offset %lld, origin %d, new offset %lld",
-		vol->vol_id, offset, origin, new_offset);
-
-	file->f_pos = new_offset;
-	return new_offset;
+	return fixed_size_llseek(file, offset, origin, vol->used_bytes);
 }
 
-static int vol_cdev_fsync(struct file *file, int datasync)
+static int vol_cdev_fsync(struct file *file, loff_t start, loff_t end,
+			  int datasync)
 {
 	struct ubi_volume_desc *desc = file->private_data;
 	struct ubi_device *ubi = desc->vol->ubi;
-
-	return ubi_sync(ubi->ubi_num);
+	struct inode *inode = file_inode(file);
+	int err;
+	mutex_lock(&inode->i_mutex);
+	err = ubi_sync(ubi->ubi_num);
+	mutex_unlock(&inode->i_mutex);
+	return err;
 }
 
 
@@ -212,11 +193,11 @@ static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count,
 		count, *offp, vol->vol_id);
 
 	if (vol->updating) {
-		dbg_err("updating");
+		ubi_err("updating");
 		return -EBUSY;
 	}
 	if (vol->upd_marker) {
-		dbg_err("damaged volume, update marker is set");
+		ubi_err("damaged volume, update marker is set");
 		return -EBADF;
 	}
 	if (*offp == vol->used_bytes || count == 0)
@@ -296,7 +277,7 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf,
 
 	lnum = div_u64_rem(*offp, vol->usable_leb_size, &off);
 	if (off & (ubi->min_io_size - 1)) {
-		dbg_err("unaligned position");
+		ubi_err("unaligned position");
 		return -EINVAL;
 	}
 
@@ -305,7 +286,7 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf,
 
 	/* We can write only in fractions of the minimum I/O unit */
 	if (count & (ubi->min_io_size - 1)) {
-		dbg_err("unaligned write length");
+		ubi_err("unaligned write length");
 		return -EINVAL;
 	}
 
@@ -330,8 +311,7 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf,
 			break;
 		}
 
-		err = ubi_eba_write_leb(ubi, vol, lnum, tbuf, off, len,
-					UBI_UNKNOWN);
+		err = ubi_eba_write_leb(ubi, vol, lnum, tbuf, off, len);
 		if (err)
 			break;
 
@@ -473,9 +453,6 @@ static long vol_cdev_ioctl(struct file *file, unsigned int cmd,
 		if (req.lnum < 0 || req.lnum >= vol->reserved_pebs ||
 		    req.bytes < 0 || req.lnum >= vol->usable_leb_size)
 			break;
-		if (req.dtype != UBI_LONGTERM && req.dtype != UBI_SHORTTERM &&
-		    req.dtype != UBI_UNKNOWN)
-			break;
 
 		err = get_exclusive(desc);
 		if (err < 0)
@@ -514,7 +491,7 @@ static long vol_cdev_ioctl(struct file *file, unsigned int cmd,
 		if (err)
 			break;
 
-		err = ubi_wl_flush(ubi);
+		err = ubi_wl_flush(ubi, UBI_ALL, UBI_ALL);
 		break;
 	}
 
@@ -528,7 +505,7 @@ static long vol_cdev_ioctl(struct file *file, unsigned int cmd,
 			err = -EFAULT;
 			break;
 		}
-		err = ubi_leb_map(desc, req.lnum, req.dtype);
+		err = ubi_leb_map(desc, req.lnum);
 		break;
 	}
 
@@ -561,18 +538,18 @@ static long vol_cdev_ioctl(struct file *file, unsigned int cmd,
 	}
 
 	/* Set volume property command */
-	case UBI_IOCSETPROP:
+	case UBI_IOCSETVOLPROP:
 	{
-		struct ubi_set_prop_req req;
+		struct ubi_set_vol_prop_req req;
 
 		err = copy_from_user(&req, argp,
-				sizeof(struct ubi_set_prop_req));
+				     sizeof(struct ubi_set_vol_prop_req));
 		if (err) {
 			err = -EFAULT;
 			break;
 		}
 		switch (req.property) {
-		case UBI_PROP_DIRECT_WRITE:
+		case UBI_VOL_PROP_DIRECT_WRITE:
 			mutex_lock(&ubi->device_mutex);
 			desc->vol->direct_writes = !!req.value;
 			mutex_unlock(&ubi->device_mutex);
@@ -584,6 +561,26 @@ static long vol_cdev_ioctl(struct file *file, unsigned int cmd,
 		break;
 	}
 
+	/* Create a R/O block device on top of the UBI volume */
+	case UBI_IOCVOLCRBLK:
+	{
+		struct ubi_volume_info vi;
+
+		ubi_get_volume_info(desc, &vi);
+		err = ubiblock_create(&vi);
+		break;
+	}
+
+	/* Remove the R/O block device */
+	case UBI_IOCVOLRMBLK:
+	{
+		struct ubi_volume_info vi;
+
+		ubi_get_volume_info(desc, &vi);
+		err = ubiblock_remove(&vi);
+		break;
+	}
+
 	default:
 		err = -ENOTTY;
 		break;
@@ -628,6 +625,9 @@ static int verify_mkvol_req(const struct ubi_device *ubi,
 	if (req->alignment != 1 && n)
 		goto bad;
 
+	if (!req->name[0] || !req->name_len)
+		goto bad;
+
 	if (req->name_len > UBI_VOL_NAME_MAX) {
 		err = -ENAMETOOLONG;
 		goto bad;
@@ -640,8 +640,8 @@ static int verify_mkvol_req(const struct ubi_device *ubi,
 	return 0;
 
 bad:
-	dbg_err("bad volume creation request");
-	ubi_dbg_dump_mkvol_req(req);
+	ubi_err("bad volume creation request");
+	ubi_dump_mkvol_req(req);
 	return err;
 }
 
@@ -706,12 +706,12 @@ static int rename_volumes(struct ubi_device *ubi,
 	for (i = 0; i < req->count - 1; i++) {
 		for (n = i + 1; n < req->count; n++) {
 			if (req->ents[i].vol_id == req->ents[n].vol_id) {
-				dbg_err("duplicated volume id %d",
+				ubi_err("duplicated volume id %d",
 					req->ents[i].vol_id);
 				return -EINVAL;
 			}
 			if (!strcmp(req->ents[i].name, req->ents[n].name)) {
-				dbg_err("duplicated volume name \"%s\"",
+				ubi_err("duplicated volume name \"%s\"",
 					req->ents[i].name);
 				return -EINVAL;
 			}
@@ -731,10 +731,10 @@ static int rename_volumes(struct ubi_device *ubi,
 			goto out_free;
 		}
 
-		re->desc = ubi_open_volume(ubi->ubi_num, vol_id, UBI_EXCLUSIVE);
+		re->desc = ubi_open_volume(ubi->ubi_num, vol_id, UBI_READWRITE);
 		if (IS_ERR(re->desc)) {
 			err = PTR_ERR(re->desc);
-			dbg_err("cannot open volume %d, error %d", vol_id, err);
+			ubi_err("cannot open volume %d, error %d", vol_id, err);
 			kfree(re);
 			goto out_free;
 		}
@@ -750,7 +750,7 @@ static int rename_volumes(struct ubi_device *ubi,
 		re->new_name_len = name_len;
 		memcpy(re->new_name, name, name_len);
 		list_add_tail(&re->list, &rename_list);
-		dbg_msg("will rename volume %d from \"%s\" to \"%s\"",
+		dbg_gen("will rename volume %d from \"%s\" to \"%s\"",
 			vol_id, re->desc->vol->name, name);
 	}
 
@@ -793,23 +793,23 @@ static int rename_volumes(struct ubi_device *ubi,
 				continue;
 
 			/* The volume exists but busy, or an error occurred */
-			dbg_err("cannot open volume \"%s\", error %d",
+			ubi_err("cannot open volume \"%s\", error %d",
 				re->new_name, err);
 			goto out_free;
 		}
 
-		re = kzalloc(sizeof(struct ubi_rename_entry), GFP_KERNEL);
-		if (!re) {
+		re1 = kzalloc(sizeof(struct ubi_rename_entry), GFP_KERNEL);
+		if (!re1) {
 			err = -ENOMEM;
 			ubi_close_volume(desc);
 			goto out_free;
 		}
 
-		re->remove = 1;
-		re->desc = desc;
-		list_add(&re->list, &rename_list);
-		dbg_msg("will remove volume %d, name \"%s\"",
-			re->desc->vol->vol_id, re->desc->vol->name);
+		re1->remove = 1;
+		re1->desc = desc;
+		list_add(&re1->list, &rename_list);
+		dbg_gen("will remove volume %d, name \"%s\"",
+			re1->desc->vol->vol_id, re1->desc->vol->name);
 	}
 
 	mutex_lock(&ubi->device_mutex);
@@ -939,7 +939,7 @@ static long ubi_cdev_ioctl(struct file *file, unsigned int cmd,
 	{
 		struct ubi_rnvol_req *req;
 
-		dbg_msg("re-name volumes");
+		dbg_gen("re-name volumes");
 		req = kmalloc(sizeof(struct ubi_rnvol_req), GFP_KERNEL);
 		if (!req) {
 			err = -ENOMEM;
@@ -1007,7 +1007,8 @@ static long ctrl_cdev_ioctl(struct file *file, unsigned int cmd,
 		 * 'ubi_attach_mtd_dev()'.
 		 */
 		mutex_lock(&ubi_devices_mutex);
-		err = ubi_attach_mtd_dev(mtd, req.ubi_num, req.vid_hdr_offset);
+		err = ubi_attach_mtd_dev(mtd, req.ubi_num, req.vid_hdr_offset,
+					 req.max_beb_per1024);
 		mutex_unlock(&ubi_devices_mutex);
 		if (err < 0)
 			put_mtd_device(mtd);
@@ -1023,7 +1024,7 @@ static long ctrl_cdev_ioctl(struct file *file, unsigned int cmd,
 	{
 		int ubi_num;
 
-		dbg_gen("dettach MTD device");
+		dbg_gen("detach MTD device");
 		err = get_user(ubi_num, (__user int32_t *)argp);
 		if (err) {
 			err = -EFAULT;
@@ -1100,4 +1101,5 @@ const struct file_operations ubi_ctrl_cdev_operations = {
 	.owner          = THIS_MODULE,
 	.unlocked_ioctl = ctrl_cdev_ioctl,
 	.compat_ioctl   = ctrl_cdev_compat_ioctl,
+	.llseek		= no_llseek,
 };
diff --git a/drivers/mtd/ubi/debug.c b/drivers/mtd/ubi/debug.c
index 4876977e52c..63cb1d7236c 100644
--- a/drivers/mtd/ubi/debug.c
+++ b/drivers/mtd/ubi/debug.c
@@ -18,214 +18,432 @@
  * Author: Artem Bityutskiy (Битюцкий Артём)
  */
 
-/*
- * Here we keep all the UBI debugging stuff which should normally be disabled
- * and compiled-out, but it is extremely helpful when hunting bugs or doing big
- * changes.
+#include "ubi.h"
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+#include <linux/module.h>
+
+
+/**
+ * ubi_dump_flash - dump a region of flash.
+ * @ubi: UBI device description object
+ * @pnum: the physical eraseblock number to dump
+ * @offset: the starting offset within the physical eraseblock to dump
+ * @len: the length of the region to dump
  */
+void ubi_dump_flash(struct ubi_device *ubi, int pnum, int offset, int len)
+{
+	int err;
+	size_t read;
+	void *buf;
+	loff_t addr = (loff_t)pnum * ubi->peb_size + offset;
 
-#ifdef CONFIG_MTD_UBI_DEBUG
+	buf = vmalloc(len);
+	if (!buf)
+		return;
+	err = mtd_read(ubi->mtd, addr, len, &read, buf);
+	if (err && err != -EUCLEAN) {
+		ubi_err("error %d while reading %d bytes from PEB %d:%d, read %zd bytes",
+			err, len, pnum, offset, read);
+		goto out;
+	}
 
-#include "ubi.h"
+	ubi_msg("dumping %d bytes of data from PEB %d, offset %d",
+		len, pnum, offset);
+	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1, buf, len, 1);
+out:
+	vfree(buf);
+	return;
+}
 
 /**
- * ubi_dbg_dump_ec_hdr - dump an erase counter header.
+ * ubi_dump_ec_hdr - dump an erase counter header.
  * @ec_hdr: the erase counter header to dump
  */
-void ubi_dbg_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr)
+void ubi_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr)
 {
-	printk(KERN_DEBUG "Erase counter header dump:\n");
-	printk(KERN_DEBUG "\tmagic          %#08x\n",
-	       be32_to_cpu(ec_hdr->magic));
-	printk(KERN_DEBUG "\tversion        %d\n", (int)ec_hdr->version);
-	printk(KERN_DEBUG "\tec             %llu\n",
-	       (long long)be64_to_cpu(ec_hdr->ec));
-	printk(KERN_DEBUG "\tvid_hdr_offset %d\n",
-	       be32_to_cpu(ec_hdr->vid_hdr_offset));
-	printk(KERN_DEBUG "\tdata_offset    %d\n",
-	       be32_to_cpu(ec_hdr->data_offset));
-	printk(KERN_DEBUG "\timage_seq      %d\n",
-	       be32_to_cpu(ec_hdr->image_seq));
-	printk(KERN_DEBUG "\thdr_crc        %#08x\n",
-	       be32_to_cpu(ec_hdr->hdr_crc));
-	printk(KERN_DEBUG "erase counter header hexdump:\n");
+	pr_err("Erase counter header dump:\n");
+	pr_err("\tmagic          %#08x\n", be32_to_cpu(ec_hdr->magic));
+	pr_err("\tversion        %d\n", (int)ec_hdr->version);
+	pr_err("\tec             %llu\n", (long long)be64_to_cpu(ec_hdr->ec));
+	pr_err("\tvid_hdr_offset %d\n", be32_to_cpu(ec_hdr->vid_hdr_offset));
+	pr_err("\tdata_offset    %d\n", be32_to_cpu(ec_hdr->data_offset));
+	pr_err("\timage_seq      %d\n", be32_to_cpu(ec_hdr->image_seq));
+	pr_err("\thdr_crc        %#08x\n", be32_to_cpu(ec_hdr->hdr_crc));
+	pr_err("erase counter header hexdump:\n");
 	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
 		       ec_hdr, UBI_EC_HDR_SIZE, 1);
 }
 
 /**
- * ubi_dbg_dump_vid_hdr - dump a volume identifier header.
+ * ubi_dump_vid_hdr - dump a volume identifier header.
  * @vid_hdr: the volume identifier header to dump
  */
-void ubi_dbg_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr)
+void ubi_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr)
 {
-	printk(KERN_DEBUG "Volume identifier header dump:\n");
-	printk(KERN_DEBUG "\tmagic     %08x\n", be32_to_cpu(vid_hdr->magic));
-	printk(KERN_DEBUG "\tversion   %d\n",   (int)vid_hdr->version);
-	printk(KERN_DEBUG "\tvol_type  %d\n",   (int)vid_hdr->vol_type);
-	printk(KERN_DEBUG "\tcopy_flag %d\n",   (int)vid_hdr->copy_flag);
-	printk(KERN_DEBUG "\tcompat    %d\n",   (int)vid_hdr->compat);
-	printk(KERN_DEBUG "\tvol_id    %d\n",   be32_to_cpu(vid_hdr->vol_id));
-	printk(KERN_DEBUG "\tlnum      %d\n",   be32_to_cpu(vid_hdr->lnum));
-	printk(KERN_DEBUG "\tdata_size %d\n",   be32_to_cpu(vid_hdr->data_size));
-	printk(KERN_DEBUG "\tused_ebs  %d\n",   be32_to_cpu(vid_hdr->used_ebs));
-	printk(KERN_DEBUG "\tdata_pad  %d\n",   be32_to_cpu(vid_hdr->data_pad));
-	printk(KERN_DEBUG "\tsqnum     %llu\n",
+	pr_err("Volume identifier header dump:\n");
+	pr_err("\tmagic     %08x\n", be32_to_cpu(vid_hdr->magic));
+	pr_err("\tversion   %d\n",  (int)vid_hdr->version);
+	pr_err("\tvol_type  %d\n",  (int)vid_hdr->vol_type);
+	pr_err("\tcopy_flag %d\n",  (int)vid_hdr->copy_flag);
+	pr_err("\tcompat    %d\n",  (int)vid_hdr->compat);
+	pr_err("\tvol_id    %d\n",  be32_to_cpu(vid_hdr->vol_id));
+	pr_err("\tlnum      %d\n",  be32_to_cpu(vid_hdr->lnum));
+	pr_err("\tdata_size %d\n",  be32_to_cpu(vid_hdr->data_size));
+	pr_err("\tused_ebs  %d\n",  be32_to_cpu(vid_hdr->used_ebs));
+	pr_err("\tdata_pad  %d\n",  be32_to_cpu(vid_hdr->data_pad));
+	pr_err("\tsqnum     %llu\n",
 		(unsigned long long)be64_to_cpu(vid_hdr->sqnum));
-	printk(KERN_DEBUG "\thdr_crc   %08x\n", be32_to_cpu(vid_hdr->hdr_crc));
-	printk(KERN_DEBUG "Volume identifier header hexdump:\n");
+	pr_err("\thdr_crc   %08x\n", be32_to_cpu(vid_hdr->hdr_crc));
+	pr_err("Volume identifier header hexdump:\n");
 	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
 		       vid_hdr, UBI_VID_HDR_SIZE, 1);
 }
 
 /**
- * ubi_dbg_dump_vol_info- dump volume information.
+ * ubi_dump_vol_info - dump volume information.
  * @vol: UBI volume description object
  */
-void ubi_dbg_dump_vol_info(const struct ubi_volume *vol)
+void ubi_dump_vol_info(const struct ubi_volume *vol)
 {
-	printk(KERN_DEBUG "Volume information dump:\n");
-	printk(KERN_DEBUG "\tvol_id          %d\n", vol->vol_id);
-	printk(KERN_DEBUG "\treserved_pebs   %d\n", vol->reserved_pebs);
-	printk(KERN_DEBUG "\talignment       %d\n", vol->alignment);
-	printk(KERN_DEBUG "\tdata_pad        %d\n", vol->data_pad);
-	printk(KERN_DEBUG "\tvol_type        %d\n", vol->vol_type);
-	printk(KERN_DEBUG "\tname_len        %d\n", vol->name_len);
-	printk(KERN_DEBUG "\tusable_leb_size %d\n", vol->usable_leb_size);
-	printk(KERN_DEBUG "\tused_ebs        %d\n", vol->used_ebs);
-	printk(KERN_DEBUG "\tused_bytes      %lld\n", vol->used_bytes);
-	printk(KERN_DEBUG "\tlast_eb_bytes   %d\n", vol->last_eb_bytes);
-	printk(KERN_DEBUG "\tcorrupted       %d\n", vol->corrupted);
-	printk(KERN_DEBUG "\tupd_marker      %d\n", vol->upd_marker);
+	pr_err("Volume information dump:\n");
+	pr_err("\tvol_id          %d\n", vol->vol_id);
+	pr_err("\treserved_pebs   %d\n", vol->reserved_pebs);
+	pr_err("\talignment       %d\n", vol->alignment);
+	pr_err("\tdata_pad        %d\n", vol->data_pad);
+	pr_err("\tvol_type        %d\n", vol->vol_type);
+	pr_err("\tname_len        %d\n", vol->name_len);
+	pr_err("\tusable_leb_size %d\n", vol->usable_leb_size);
+	pr_err("\tused_ebs        %d\n", vol->used_ebs);
+	pr_err("\tused_bytes      %lld\n", vol->used_bytes);
+	pr_err("\tlast_eb_bytes   %d\n", vol->last_eb_bytes);
+	pr_err("\tcorrupted       %d\n", vol->corrupted);
+	pr_err("\tupd_marker      %d\n", vol->upd_marker);
 
 	if (vol->name_len <= UBI_VOL_NAME_MAX &&
 	    strnlen(vol->name, vol->name_len + 1) == vol->name_len) {
-		printk(KERN_DEBUG "\tname            %s\n", vol->name);
+		pr_err("\tname            %s\n", vol->name);
 	} else {
-		printk(KERN_DEBUG "\t1st 5 characters of name: %c%c%c%c%c\n",
+		pr_err("\t1st 5 characters of name: %c%c%c%c%c\n",
 		       vol->name[0], vol->name[1], vol->name[2],
 		       vol->name[3], vol->name[4]);
 	}
 }
 
 /**
- * ubi_dbg_dump_vtbl_record - dump a &struct ubi_vtbl_record object.
+ * ubi_dump_vtbl_record - dump a &struct ubi_vtbl_record object.
  * @r: the object to dump
  * @idx: volume table index
  */
-void ubi_dbg_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx)
+void ubi_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx)
 {
 	int name_len = be16_to_cpu(r->name_len);
 
-	printk(KERN_DEBUG "Volume table record %d dump:\n", idx);
-	printk(KERN_DEBUG "\treserved_pebs   %d\n",
-	       be32_to_cpu(r->reserved_pebs));
-	printk(KERN_DEBUG "\talignment       %d\n", be32_to_cpu(r->alignment));
-	printk(KERN_DEBUG "\tdata_pad        %d\n", be32_to_cpu(r->data_pad));
-	printk(KERN_DEBUG "\tvol_type        %d\n", (int)r->vol_type);
-	printk(KERN_DEBUG "\tupd_marker      %d\n", (int)r->upd_marker);
-	printk(KERN_DEBUG "\tname_len        %d\n", name_len);
+	pr_err("Volume table record %d dump:\n", idx);
+	pr_err("\treserved_pebs   %d\n", be32_to_cpu(r->reserved_pebs));
+	pr_err("\talignment       %d\n", be32_to_cpu(r->alignment));
+	pr_err("\tdata_pad        %d\n", be32_to_cpu(r->data_pad));
+	pr_err("\tvol_type        %d\n", (int)r->vol_type);
+	pr_err("\tupd_marker      %d\n", (int)r->upd_marker);
+	pr_err("\tname_len        %d\n", name_len);
 
 	if (r->name[0] == '\0') {
-		printk(KERN_DEBUG "\tname            NULL\n");
+		pr_err("\tname            NULL\n");
 		return;
 	}
 
 	if (name_len <= UBI_VOL_NAME_MAX &&
 	    strnlen(&r->name[0], name_len + 1) == name_len) {
-		printk(KERN_DEBUG "\tname            %s\n", &r->name[0]);
+		pr_err("\tname            %s\n", &r->name[0]);
 	} else {
-		printk(KERN_DEBUG "\t1st 5 characters of name: %c%c%c%c%c\n",
+		pr_err("\t1st 5 characters of name: %c%c%c%c%c\n",
 			r->name[0], r->name[1], r->name[2], r->name[3],
 			r->name[4]);
 	}
-	printk(KERN_DEBUG "\tcrc             %#08x\n", be32_to_cpu(r->crc));
+	pr_err("\tcrc             %#08x\n", be32_to_cpu(r->crc));
 }
 
 /**
- * ubi_dbg_dump_sv - dump a &struct ubi_scan_volume object.
- * @sv: the object to dump
+ * ubi_dump_av - dump a &struct ubi_ainf_volume object.
+ * @av: the object to dump
  */
-void ubi_dbg_dump_sv(const struct ubi_scan_volume *sv)
+void ubi_dump_av(const struct ubi_ainf_volume *av)
 {
-	printk(KERN_DEBUG "Volume scanning information dump:\n");
-	printk(KERN_DEBUG "\tvol_id         %d\n", sv->vol_id);
-	printk(KERN_DEBUG "\thighest_lnum   %d\n", sv->highest_lnum);
-	printk(KERN_DEBUG "\tleb_count      %d\n", sv->leb_count);
-	printk(KERN_DEBUG "\tcompat         %d\n", sv->compat);
-	printk(KERN_DEBUG "\tvol_type       %d\n", sv->vol_type);
-	printk(KERN_DEBUG "\tused_ebs       %d\n", sv->used_ebs);
-	printk(KERN_DEBUG "\tlast_data_size %d\n", sv->last_data_size);
-	printk(KERN_DEBUG "\tdata_pad       %d\n", sv->data_pad);
+	pr_err("Volume attaching information dump:\n");
+	pr_err("\tvol_id         %d\n", av->vol_id);
+	pr_err("\thighest_lnum   %d\n", av->highest_lnum);
+	pr_err("\tleb_count      %d\n", av->leb_count);
+	pr_err("\tcompat         %d\n", av->compat);
+	pr_err("\tvol_type       %d\n", av->vol_type);
+	pr_err("\tused_ebs       %d\n", av->used_ebs);
+	pr_err("\tlast_data_size %d\n", av->last_data_size);
+	pr_err("\tdata_pad       %d\n", av->data_pad);
 }
 
 /**
- * ubi_dbg_dump_seb - dump a &struct ubi_scan_leb object.
- * @seb: the object to dump
+ * ubi_dump_aeb - dump a &struct ubi_ainf_peb object.
+ * @aeb: the object to dump
  * @type: object type: 0 - not corrupted, 1 - corrupted
  */
-void ubi_dbg_dump_seb(const struct ubi_scan_leb *seb, int type)
+void ubi_dump_aeb(const struct ubi_ainf_peb *aeb, int type)
 {
-	printk(KERN_DEBUG "eraseblock scanning information dump:\n");
-	printk(KERN_DEBUG "\tec       %d\n", seb->ec);
-	printk(KERN_DEBUG "\tpnum     %d\n", seb->pnum);
+	pr_err("eraseblock attaching information dump:\n");
+	pr_err("\tec       %d\n", aeb->ec);
+	pr_err("\tpnum     %d\n", aeb->pnum);
 	if (type == 0) {
-		printk(KERN_DEBUG "\tlnum     %d\n", seb->lnum);
-		printk(KERN_DEBUG "\tscrub    %d\n", seb->scrub);
-		printk(KERN_DEBUG "\tsqnum    %llu\n", seb->sqnum);
+		pr_err("\tlnum     %d\n", aeb->lnum);
+		pr_err("\tscrub    %d\n", aeb->scrub);
+		pr_err("\tsqnum    %llu\n", aeb->sqnum);
 	}
 }
 
 /**
- * ubi_dbg_dump_mkvol_req - dump a &struct ubi_mkvol_req object.
+ * ubi_dump_mkvol_req - dump a &struct ubi_mkvol_req object.
  * @req: the object to dump
  */
-void ubi_dbg_dump_mkvol_req(const struct ubi_mkvol_req *req)
+void ubi_dump_mkvol_req(const struct ubi_mkvol_req *req)
 {
 	char nm[17];
 
-	printk(KERN_DEBUG "Volume creation request dump:\n");
-	printk(KERN_DEBUG "\tvol_id    %d\n",   req->vol_id);
-	printk(KERN_DEBUG "\talignment %d\n",   req->alignment);
-	printk(KERN_DEBUG "\tbytes     %lld\n", (long long)req->bytes);
-	printk(KERN_DEBUG "\tvol_type  %d\n",   req->vol_type);
-	printk(KERN_DEBUG "\tname_len  %d\n",   req->name_len);
+	pr_err("Volume creation request dump:\n");
+	pr_err("\tvol_id    %d\n",   req->vol_id);
+	pr_err("\talignment %d\n",   req->alignment);
+	pr_err("\tbytes     %lld\n", (long long)req->bytes);
+	pr_err("\tvol_type  %d\n",   req->vol_type);
+	pr_err("\tname_len  %d\n",   req->name_len);
 
 	memcpy(nm, req->name, 16);
 	nm[16] = 0;
-	printk(KERN_DEBUG "\t1st 16 characters of name: %s\n", nm);
+	pr_err("\t1st 16 characters of name: %s\n", nm);
+}
+
+/*
+ * Root directory for UBI stuff in debugfs. Contains sub-directories which
+ * contain the stuff specific to particular UBI devices.
+ */
+static struct dentry *dfs_rootdir;
+
+/**
+ * ubi_debugfs_init - create UBI debugfs directory.
+ *
+ * Create UBI debugfs directory. Returns zero in case of success and a negative
+ * error code in case of failure.
+ */
+int ubi_debugfs_init(void)
+{
+	if (!IS_ENABLED(CONFIG_DEBUG_FS))
+		return 0;
+
+	dfs_rootdir = debugfs_create_dir("ubi", NULL);
+	if (IS_ERR_OR_NULL(dfs_rootdir)) {
+		int err = dfs_rootdir ? -ENODEV : PTR_ERR(dfs_rootdir);
+
+		ubi_err("cannot create \"ubi\" debugfs directory, error %d\n",
+			err);
+		return err;
+	}
+
+	return 0;
+}
+
+/**
+ * ubi_debugfs_exit - remove UBI debugfs directory.
+ */
+void ubi_debugfs_exit(void)
+{
+	if (IS_ENABLED(CONFIG_DEBUG_FS))
+		debugfs_remove(dfs_rootdir);
+}
+
+/* Read an UBI debugfs file */
+static ssize_t dfs_file_read(struct file *file, char __user *user_buf,
+			     size_t count, loff_t *ppos)
+{
+	unsigned long ubi_num = (unsigned long)file->private_data;
+	struct dentry *dent = file->f_path.dentry;
+	struct ubi_device *ubi;
+	struct ubi_debug_info *d;
+	char buf[3];
+	int val;
+
+	ubi = ubi_get_device(ubi_num);
+	if (!ubi)
+		return -ENODEV;
+	d = &ubi->dbg;
+
+	if (dent == d->dfs_chk_gen)
+		val = d->chk_gen;
+	else if (dent == d->dfs_chk_io)
+		val = d->chk_io;
+	else if (dent == d->dfs_disable_bgt)
+		val = d->disable_bgt;
+	else if (dent == d->dfs_emulate_bitflips)
+		val = d->emulate_bitflips;
+	else if (dent == d->dfs_emulate_io_failures)
+		val = d->emulate_io_failures;
+	else {
+		count = -EINVAL;
+		goto out;
+	}
+
+	if (val)
+		buf[0] = '1';
+	else
+		buf[0] = '0';
+	buf[1] = '\n';
+	buf[2] = 0x00;
+
+	count = simple_read_from_buffer(user_buf, count, ppos, buf, 2);
+
+out:
+	ubi_put_device(ubi);
+	return count;
 }
 
+/* Write an UBI debugfs file */
+static ssize_t dfs_file_write(struct file *file, const char __user *user_buf,
+			      size_t count, loff_t *ppos)
+{
+	unsigned long ubi_num = (unsigned long)file->private_data;
+	struct dentry *dent = file->f_path.dentry;
+	struct ubi_device *ubi;
+	struct ubi_debug_info *d;
+	size_t buf_size;
+	char buf[8];
+	int val;
+
+	ubi = ubi_get_device(ubi_num);
+	if (!ubi)
+		return -ENODEV;
+	d = &ubi->dbg;
+
+	buf_size = min_t(size_t, count, (sizeof(buf) - 1));
+	if (copy_from_user(buf, user_buf, buf_size)) {
+		count = -EFAULT;
+		goto out;
+	}
+
+	if (buf[0] == '1')
+		val = 1;
+	else if (buf[0] == '0')
+		val = 0;
+	else {
+		count = -EINVAL;
+		goto out;
+	}
+
+	if (dent == d->dfs_chk_gen)
+		d->chk_gen = val;
+	else if (dent == d->dfs_chk_io)
+		d->chk_io = val;
+	else if (dent == d->dfs_disable_bgt)
+		d->disable_bgt = val;
+	else if (dent == d->dfs_emulate_bitflips)
+		d->emulate_bitflips = val;
+	else if (dent == d->dfs_emulate_io_failures)
+		d->emulate_io_failures = val;
+	else
+		count = -EINVAL;
+
+out:
+	ubi_put_device(ubi);
+	return count;
+}
+
+/* File operations for all UBI debugfs files */
+static const struct file_operations dfs_fops = {
+	.read   = dfs_file_read,
+	.write  = dfs_file_write,
+	.open	= simple_open,
+	.llseek = no_llseek,
+	.owner  = THIS_MODULE,
+};
+
 /**
- * ubi_dbg_dump_flash - dump a region of flash.
+ * ubi_debugfs_init_dev - initialize debugfs for an UBI device.
  * @ubi: UBI device description object
- * @pnum: the physical eraseblock number to dump
- * @offset: the starting offset within the physical eraseblock to dump
- * @len: the length of the region to dump
+ *
+ * This function creates all debugfs files for UBI device @ubi. Returns zero in
+ * case of success and a negative error code in case of failure.
  */
-void ubi_dbg_dump_flash(struct ubi_device *ubi, int pnum, int offset, int len)
+int ubi_debugfs_init_dev(struct ubi_device *ubi)
 {
-	int err;
-	size_t read;
-	void *buf;
-	loff_t addr = (loff_t)pnum * ubi->peb_size + offset;
+	int err, n;
+	unsigned long ubi_num = ubi->ubi_num;
+	const char *fname;
+	struct dentry *dent;
+	struct ubi_debug_info *d = &ubi->dbg;
 
-	buf = vmalloc(len);
-	if (!buf)
-		return;
-	err = ubi->mtd->read(ubi->mtd, addr, len, &read, buf);
-	if (err && err != -EUCLEAN) {
-		ubi_err("error %d while reading %d bytes from PEB %d:%d, "
-			"read %zd bytes", err, len, pnum, offset, read);
+	if (!IS_ENABLED(CONFIG_DEBUG_FS))
+		return 0;
+
+	n = snprintf(d->dfs_dir_name, UBI_DFS_DIR_LEN + 1, UBI_DFS_DIR_NAME,
+		     ubi->ubi_num);
+	if (n == UBI_DFS_DIR_LEN) {
+		/* The array size is too small */
+		fname = UBI_DFS_DIR_NAME;
+		dent = ERR_PTR(-EINVAL);
 		goto out;
 	}
 
-	dbg_msg("dumping %d bytes of data from PEB %d, offset %d",
-		len, pnum, offset);
-	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1, buf, len, 1);
+	fname = d->dfs_dir_name;
+	dent = debugfs_create_dir(fname, dfs_rootdir);
+	if (IS_ERR_OR_NULL(dent))
+		goto out;
+	d->dfs_dir = dent;
+
+	fname = "chk_gen";
+	dent = debugfs_create_file(fname, S_IWUSR, d->dfs_dir, (void *)ubi_num,
+				   &dfs_fops);
+	if (IS_ERR_OR_NULL(dent))
+		goto out_remove;
+	d->dfs_chk_gen = dent;
+
+	fname = "chk_io";
+	dent = debugfs_create_file(fname, S_IWUSR, d->dfs_dir, (void *)ubi_num,
+				   &dfs_fops);
+	if (IS_ERR_OR_NULL(dent))
+		goto out_remove;
+	d->dfs_chk_io = dent;
+
+	fname = "tst_disable_bgt";
+	dent = debugfs_create_file(fname, S_IWUSR, d->dfs_dir, (void *)ubi_num,
+				   &dfs_fops);
+	if (IS_ERR_OR_NULL(dent))
+		goto out_remove;
+	d->dfs_disable_bgt = dent;
+
+	fname = "tst_emulate_bitflips";
+	dent = debugfs_create_file(fname, S_IWUSR, d->dfs_dir, (void *)ubi_num,
+				   &dfs_fops);
+	if (IS_ERR_OR_NULL(dent))
+		goto out_remove;
+	d->dfs_emulate_bitflips = dent;
+
+	fname = "tst_emulate_io_failures";
+	dent = debugfs_create_file(fname, S_IWUSR, d->dfs_dir, (void *)ubi_num,
+				   &dfs_fops);
+	if (IS_ERR_OR_NULL(dent))
+		goto out_remove;
+	d->dfs_emulate_io_failures = dent;
+
+	return 0;
+
+out_remove:
+	debugfs_remove_recursive(d->dfs_dir);
 out:
-	vfree(buf);
-	return;
+	err = dent ? PTR_ERR(dent) : -ENODEV;
+	ubi_err("cannot create \"%s\" debugfs file or directory, error %d\n",
+		fname, err);
+	return err;
 }
 
-#endif /* CONFIG_MTD_UBI_DEBUG */
+/**
+ * dbg_debug_exit_dev - free all debugfs files corresponding to device @ubi
+ * @ubi: UBI device description object
+ */
+void ubi_debugfs_exit_dev(struct ubi_device *ubi)
+{
+	if (IS_ENABLED(CONFIG_DEBUG_FS))
+		debugfs_remove_recursive(ubi->dbg.dfs_dir);
+}
diff --git a/drivers/mtd/ubi/debug.h b/drivers/mtd/ubi/debug.h
index 17a10712972..cba89fcd158 100644
--- a/drivers/mtd/ubi/debug.h
+++ b/drivers/mtd/ubi/debug.h
@@ -21,165 +21,110 @@
 #ifndef __UBI_DEBUG_H__
 #define __UBI_DEBUG_H__
 
-#ifdef CONFIG_MTD_UBI_DEBUG
-#include <linux/random.h>
+void ubi_dump_flash(struct ubi_device *ubi, int pnum, int offset, int len);
+void ubi_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr);
+void ubi_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr);
 
-#define dbg_err(fmt, ...) ubi_err(fmt, ##__VA_ARGS__)
+#include <linux/random.h>
 
 #define ubi_assert(expr)  do {                                               \
 	if (unlikely(!(expr))) {                                             \
-		printk(KERN_CRIT "UBI assert failed in %s at %u (pid %d)\n", \
+		pr_crit("UBI assert failed in %s at %u (pid %d)\n",          \
 		       __func__, __LINE__, current->pid);                    \
-		ubi_dbg_dump_stack();                                        \
+		dump_stack();                                                \
 	}                                                                    \
 } while (0)
 
-#define dbg_msg(fmt, ...)                                    \
-	printk(KERN_DEBUG "UBI DBG (pid %d): %s: " fmt "\n", \
-	       current->pid, __func__, ##__VA_ARGS__)
-
-#define ubi_dbg_dump_stack() dump_stack()
+#define ubi_dbg_print_hex_dump(l, ps, pt, r, g, b, len, a)                   \
+		print_hex_dump(l, ps, pt, r, g, b, len, a)
 
-struct ubi_ec_hdr;
-struct ubi_vid_hdr;
-struct ubi_volume;
-struct ubi_vtbl_record;
-struct ubi_scan_volume;
-struct ubi_scan_leb;
-struct ubi_mkvol_req;
+#define ubi_dbg_msg(type, fmt, ...) \
+	pr_debug("UBI DBG " type " (pid %d): " fmt "\n", current->pid,       \
+		 ##__VA_ARGS__)
 
-void ubi_dbg_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr);
-void ubi_dbg_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr);
-void ubi_dbg_dump_vol_info(const struct ubi_volume *vol);
-void ubi_dbg_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx);
-void ubi_dbg_dump_sv(const struct ubi_scan_volume *sv);
-void ubi_dbg_dump_seb(const struct ubi_scan_leb *seb, int type);
-void ubi_dbg_dump_mkvol_req(const struct ubi_mkvol_req *req);
-void ubi_dbg_dump_flash(struct ubi_device *ubi, int pnum, int offset, int len);
-
-#ifdef CONFIG_MTD_UBI_DEBUG_MSG
 /* General debugging messages */
-#define dbg_gen(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
-#else
-#define dbg_gen(fmt, ...) ({})
-#endif
-
-#ifdef CONFIG_MTD_UBI_DEBUG_MSG_EBA
+#define dbg_gen(fmt, ...) ubi_dbg_msg("gen", fmt, ##__VA_ARGS__)
 /* Messages from the eraseblock association sub-system */
-#define dbg_eba(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
-#else
-#define dbg_eba(fmt, ...) ({})
-#endif
-
-#ifdef CONFIG_MTD_UBI_DEBUG_MSG_WL
+#define dbg_eba(fmt, ...) ubi_dbg_msg("eba", fmt, ##__VA_ARGS__)
 /* Messages from the wear-leveling sub-system */
-#define dbg_wl(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
-#else
-#define dbg_wl(fmt, ...) ({})
-#endif
-
-#ifdef CONFIG_MTD_UBI_DEBUG_MSG_IO
+#define dbg_wl(fmt, ...)  ubi_dbg_msg("wl", fmt, ##__VA_ARGS__)
 /* Messages from the input/output sub-system */
-#define dbg_io(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
-#else
-#define dbg_io(fmt, ...) ({})
-#endif
-
-#ifdef CONFIG_MTD_UBI_DEBUG_MSG_BLD
+#define dbg_io(fmt, ...)  ubi_dbg_msg("io", fmt, ##__VA_ARGS__)
 /* Initialization and build messages */
-#define dbg_bld(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
-#define UBI_IO_DEBUG 1
-#else
-#define dbg_bld(fmt, ...) ({})
-#define UBI_IO_DEBUG 0
-#endif
+#define dbg_bld(fmt, ...) ubi_dbg_msg("bld", fmt, ##__VA_ARGS__)
+
+void ubi_dump_vol_info(const struct ubi_volume *vol);
+void ubi_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx);
+void ubi_dump_av(const struct ubi_ainf_volume *av);
+void ubi_dump_aeb(const struct ubi_ainf_peb *aeb, int type);
+void ubi_dump_mkvol_req(const struct ubi_mkvol_req *req);
+int ubi_self_check_all_ff(struct ubi_device *ubi, int pnum, int offset,
+			  int len);
+int ubi_debugfs_init(void);
+void ubi_debugfs_exit(void);
+int ubi_debugfs_init_dev(struct ubi_device *ubi);
+void ubi_debugfs_exit_dev(struct ubi_device *ubi);
 
-#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
-int ubi_dbg_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len);
-int ubi_dbg_check_write(struct ubi_device *ubi, const void *buf, int pnum,
-			int offset, int len);
-#else
-#define ubi_dbg_check_all_ff(ubi, pnum, offset, len) 0
-#define ubi_dbg_check_write(ubi, buf, pnum, offset, len) 0
-#endif
-
-#ifdef CONFIG_MTD_UBI_DEBUG_DISABLE_BGT
-#define DBG_DISABLE_BGT 1
-#else
-#define DBG_DISABLE_BGT 0
-#endif
+/**
+ * ubi_dbg_is_bgt_disabled - if the background thread is disabled.
+ * @ubi: UBI device description object
+ *
+ * Returns non-zero if the UBI background thread is disabled for testing
+ * purposes.
+ */
+static inline int ubi_dbg_is_bgt_disabled(const struct ubi_device *ubi)
+{
+	return ubi->dbg.disable_bgt;
+}
 
-#ifdef CONFIG_MTD_UBI_DEBUG_EMULATE_BITFLIPS
 /**
  * ubi_dbg_is_bitflip - if it is time to emulate a bit-flip.
+ * @ubi: UBI device description object
  *
  * Returns non-zero if a bit-flip should be emulated, otherwise returns zero.
  */
-static inline int ubi_dbg_is_bitflip(void)
+static inline int ubi_dbg_is_bitflip(const struct ubi_device *ubi)
 {
-	return !(random32() % 200);
+	if (ubi->dbg.emulate_bitflips)
+		return !(prandom_u32() % 200);
+	return 0;
 }
-#else
-#define ubi_dbg_is_bitflip() 0
-#endif
 
-#ifdef CONFIG_MTD_UBI_DEBUG_EMULATE_WRITE_FAILURES
 /**
  * ubi_dbg_is_write_failure - if it is time to emulate a write failure.
+ * @ubi: UBI device description object
  *
  * Returns non-zero if a write failure should be emulated, otherwise returns
  * zero.
  */
-static inline int ubi_dbg_is_write_failure(void)
+static inline int ubi_dbg_is_write_failure(const struct ubi_device *ubi)
 {
-	return !(random32() % 500);
+	if (ubi->dbg.emulate_io_failures)
+		return !(prandom_u32() % 500);
+	return 0;
 }
-#else
-#define ubi_dbg_is_write_failure() 0
-#endif
 
-#ifdef CONFIG_MTD_UBI_DEBUG_EMULATE_ERASE_FAILURES
 /**
  * ubi_dbg_is_erase_failure - if its time to emulate an erase failure.
+ * @ubi: UBI device description object
  *
  * Returns non-zero if an erase failure should be emulated, otherwise returns
  * zero.
  */
-static inline int ubi_dbg_is_erase_failure(void)
+static inline int ubi_dbg_is_erase_failure(const struct ubi_device *ubi)
 {
-		return !(random32() % 400);
+	if (ubi->dbg.emulate_io_failures)
+		return !(prandom_u32() % 400);
+	return 0;
 }
-#else
-#define ubi_dbg_is_erase_failure() 0
-#endif
-
-#else
 
-#define ubi_assert(expr)                 ({})
-#define dbg_err(fmt, ...)                ({})
-#define dbg_msg(fmt, ...)                ({})
-#define dbg_gen(fmt, ...)                ({})
-#define dbg_eba(fmt, ...)                ({})
-#define dbg_wl(fmt, ...)                 ({})
-#define dbg_io(fmt, ...)                 ({})
-#define dbg_bld(fmt, ...)                ({})
-#define ubi_dbg_dump_stack()             ({})
-#define ubi_dbg_dump_ec_hdr(ec_hdr)      ({})
-#define ubi_dbg_dump_vid_hdr(vid_hdr)    ({})
-#define ubi_dbg_dump_vol_info(vol)       ({})
-#define ubi_dbg_dump_vtbl_record(r, idx) ({})
-#define ubi_dbg_dump_sv(sv)              ({})
-#define ubi_dbg_dump_seb(seb, type)      ({})
-#define ubi_dbg_dump_mkvol_req(req)      ({})
-#define ubi_dbg_dump_flash(ubi, pnum, offset, len) ({})
-
-#define UBI_IO_DEBUG               0
-#define DBG_DISABLE_BGT            0
-#define ubi_dbg_is_bitflip()       0
-#define ubi_dbg_is_write_failure() 0
-#define ubi_dbg_is_erase_failure() 0
-#define ubi_dbg_check_all_ff(ubi, pnum, offset, len) 0
-#define ubi_dbg_check_write(ubi, buf, pnum, offset, len) 0
+static inline int ubi_dbg_chk_io(const struct ubi_device *ubi)
+{
+	return ubi->dbg.chk_io;
+}
 
-#endif /* !CONFIG_MTD_UBI_DEBUG */
+static inline int ubi_dbg_chk_gen(const struct ubi_device *ubi)
+{
+	return ubi->dbg.chk_gen;
+}
 #endif /* !__UBI_DEBUG_H__ */
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 9f87c99189a..0e11671dadc 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -57,7 +57,7 @@
  * global sequence counter value. It also increases the global sequence
  * counter.
  */
-static unsigned long long next_sqnum(struct ubi_device *ubi)
+unsigned long long ubi_next_sqnum(struct ubi_device *ubi)
 {
 	unsigned long long sqnum;
 
@@ -340,8 +340,10 @@ int ubi_eba_unmap_leb(struct ubi_device *ubi, struct ubi_volume *vol,
 
 	dbg_eba("erase LEB %d:%d, PEB %d", vol_id, lnum, pnum);
 
+	down_read(&ubi->fm_sem);
 	vol->eba_tbl[lnum] = UBI_LEB_UNMAPPED;
-	err = ubi_wl_put_peb(ubi, pnum, 0);
+	up_read(&ubi->fm_sem);
+	err = ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 0);
 
 out_unlock:
 	leb_write_unlock(ubi, vol_id, lnum);
@@ -418,10 +420,10 @@ retry:
 				 * may try to recover data. FIXME: but this is
 				 * not implemented.
 				 */
-				if (err == UBI_IO_BAD_VID_HDR) {
-					ubi_warn("corrupted VID header at PEB "
-						 "%d, LEB %d:%d", pnum, vol_id,
-						 lnum);
+				if (err == UBI_IO_BAD_HDR_EBADMSG ||
+				    err == UBI_IO_BAD_HDR) {
+					ubi_warn("corrupted VID header at PEB %d, LEB %d:%d",
+						 pnum, vol_id, lnum);
 					err = -EBADMSG;
 				} else
 					ubi_ro_mode(ubi);
@@ -442,7 +444,7 @@ retry:
 		if (err == UBI_IO_BITFLIPS) {
 			scrub = 1;
 			err = 0;
-		} else if (err == -EBADMSG) {
+		} else if (mtd_is_eccerr(err)) {
 			if (vol->vol_type == UBI_DYNAMIC_VOLUME)
 				goto out_unlock;
 			scrub = 1;
@@ -506,7 +508,7 @@ static int recover_peb(struct ubi_device *ubi, int pnum, int vol_id, int lnum,
 		return -ENOMEM;
 
 retry:
-	new_pnum = ubi_wl_get_peb(ubi, UBI_UNKNOWN);
+	new_pnum = ubi_wl_get_peb(ubi);
 	if (new_pnum < 0) {
 		ubi_free_vid_hdr(ubi, vid_hdr);
 		return new_pnum;
@@ -521,25 +523,25 @@ retry:
 		goto out_put;
 	}
 
-	vid_hdr->sqnum = cpu_to_be64(next_sqnum(ubi));
+	vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
 	err = ubi_io_write_vid_hdr(ubi, new_pnum, vid_hdr);
 	if (err)
 		goto write_error;
 
 	data_size = offset + len;
 	mutex_lock(&ubi->buf_mutex);
-	memset(ubi->peb_buf1 + offset, 0xFF, len);
+	memset(ubi->peb_buf + offset, 0xFF, len);
 
 	/* Read everything before the area where the write failure happened */
 	if (offset > 0) {
-		err = ubi_io_read_data(ubi, ubi->peb_buf1, pnum, 0, offset);
+		err = ubi_io_read_data(ubi, ubi->peb_buf, pnum, 0, offset);
 		if (err && err != UBI_IO_BITFLIPS)
 			goto out_unlock;
 	}
 
-	memcpy(ubi->peb_buf1 + offset, buf, len);
+	memcpy(ubi->peb_buf + offset, buf, len);
 
-	err = ubi_io_write_data(ubi, ubi->peb_buf1, new_pnum, 0, data_size);
+	err = ubi_io_write_data(ubi, ubi->peb_buf, new_pnum, 0, data_size);
 	if (err) {
 		mutex_unlock(&ubi->buf_mutex);
 		goto write_error;
@@ -548,8 +550,10 @@ retry:
 	mutex_unlock(&ubi->buf_mutex);
 	ubi_free_vid_hdr(ubi, vid_hdr);
 
+	down_read(&ubi->fm_sem);
 	vol->eba_tbl[lnum] = new_pnum;
-	ubi_wl_put_peb(ubi, pnum, 1);
+	up_read(&ubi->fm_sem);
+	ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 1);
 
 	ubi_msg("data was successfully recovered");
 	return 0;
@@ -557,7 +561,7 @@ retry:
 out_unlock:
 	mutex_unlock(&ubi->buf_mutex);
 out_put:
-	ubi_wl_put_peb(ubi, new_pnum, 1);
+	ubi_wl_put_peb(ubi, vol_id, lnum, new_pnum, 1);
 	ubi_free_vid_hdr(ubi, vid_hdr);
 	return err;
 
@@ -567,7 +571,7 @@ write_error:
 	 * get another one.
 	 */
 	ubi_warn("failed to write to PEB %d", new_pnum);
-	ubi_wl_put_peb(ubi, new_pnum, 1);
+	ubi_wl_put_peb(ubi, vol_id, lnum, new_pnum, 1);
 	if (++tries > UBI_IO_RETRIES) {
 		ubi_free_vid_hdr(ubi, vid_hdr);
 		return err;
@@ -584,7 +588,6 @@ write_error:
  * @buf: the data to write
  * @offset: offset within the logical eraseblock where to write
  * @len: how many bytes to write
- * @dtype: data type
  *
  * This function writes data to logical eraseblock @lnum of a dynamic volume
  * @vol. Returns zero in case of success and a negative error code in case
@@ -592,7 +595,7 @@ write_error:
  * written to the flash media, but may be some garbage.
  */
 int ubi_eba_write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
-		      const void *buf, int offset, int len, int dtype)
+		      const void *buf, int offset, int len)
 {
 	int err, pnum, tries = 0, vol_id = vol->vol_id;
 	struct ubi_vid_hdr *vid_hdr;
@@ -633,14 +636,14 @@ int ubi_eba_write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
 	}
 
 	vid_hdr->vol_type = UBI_VID_DYNAMIC;
-	vid_hdr->sqnum = cpu_to_be64(next_sqnum(ubi));
+	vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
 	vid_hdr->vol_id = cpu_to_be32(vol_id);
 	vid_hdr->lnum = cpu_to_be32(lnum);
 	vid_hdr->compat = ubi_get_compat(ubi, vol_id);
 	vid_hdr->data_pad = cpu_to_be32(vol->data_pad);
 
 retry:
-	pnum = ubi_wl_get_peb(ubi, dtype);
+	pnum = ubi_wl_get_peb(ubi);
 	if (pnum < 0) {
 		ubi_free_vid_hdr(ubi, vid_hdr);
 		leb_write_unlock(ubi, vol_id, lnum);
@@ -660,14 +663,15 @@ retry:
 	if (len) {
 		err = ubi_io_write_data(ubi, buf, pnum, offset, len);
 		if (err) {
-			ubi_warn("failed to write %d bytes at offset %d of "
-				 "LEB %d:%d, PEB %d", len, offset, vol_id,
-				 lnum, pnum);
+			ubi_warn("failed to write %d bytes at offset %d of LEB %d:%d, PEB %d",
+				 len, offset, vol_id, lnum, pnum);
 			goto write_error;
 		}
 	}
 
+	down_read(&ubi->fm_sem);
 	vol->eba_tbl[lnum] = pnum;
+	up_read(&ubi->fm_sem);
 
 	leb_write_unlock(ubi, vol_id, lnum);
 	ubi_free_vid_hdr(ubi, vid_hdr);
@@ -686,7 +690,7 @@ write_error:
 	 * eraseblock, so just put it and request a new one. We assume that if
 	 * this physical eraseblock went bad, the erase code will handle that.
 	 */
-	err = ubi_wl_put_peb(ubi, pnum, 1);
+	err = ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 1);
 	if (err || ++tries > UBI_IO_RETRIES) {
 		ubi_ro_mode(ubi);
 		leb_write_unlock(ubi, vol_id, lnum);
@@ -694,7 +698,7 @@ write_error:
 		return err;
 	}
 
-	vid_hdr->sqnum = cpu_to_be64(next_sqnum(ubi));
+	vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
 	ubi_msg("try another PEB");
 	goto retry;
 }
@@ -706,7 +710,6 @@ write_error:
  * @lnum: logical eraseblock number
  * @buf: data to write
  * @len: how many bytes to write
- * @dtype: data type
  * @used_ebs: how many logical eraseblocks will this volume contain
  *
  * This function writes data to logical eraseblock @lnum of static volume
@@ -723,8 +726,7 @@ write_error:
  * code in case of failure.
  */
 int ubi_eba_write_leb_st(struct ubi_device *ubi, struct ubi_volume *vol,
-			 int lnum, const void *buf, int len, int dtype,
-			 int used_ebs)
+			 int lnum, const void *buf, int len, int used_ebs)
 {
 	int err, pnum, tries = 0, data_size = len, vol_id = vol->vol_id;
 	struct ubi_vid_hdr *vid_hdr;
@@ -749,7 +751,7 @@ int ubi_eba_write_leb_st(struct ubi_device *ubi, struct ubi_volume *vol,
 		return err;
 	}
 
-	vid_hdr->sqnum = cpu_to_be64(next_sqnum(ubi));
+	vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
 	vid_hdr->vol_id = cpu_to_be32(vol_id);
 	vid_hdr->lnum = cpu_to_be32(lnum);
 	vid_hdr->compat = ubi_get_compat(ubi, vol_id);
@@ -762,7 +764,7 @@ int ubi_eba_write_leb_st(struct ubi_device *ubi, struct ubi_volume *vol,
 	vid_hdr->data_crc = cpu_to_be32(crc);
 
 retry:
-	pnum = ubi_wl_get_peb(ubi, dtype);
+	pnum = ubi_wl_get_peb(ubi);
 	if (pnum < 0) {
 		ubi_free_vid_hdr(ubi, vid_hdr);
 		leb_write_unlock(ubi, vol_id, lnum);
@@ -787,7 +789,9 @@ retry:
 	}
 
 	ubi_assert(vol->eba_tbl[lnum] < 0);
+	down_read(&ubi->fm_sem);
 	vol->eba_tbl[lnum] = pnum;
+	up_read(&ubi->fm_sem);
 
 	leb_write_unlock(ubi, vol_id, lnum);
 	ubi_free_vid_hdr(ubi, vid_hdr);
@@ -806,7 +810,7 @@ write_error:
 		return err;
 	}
 
-	err = ubi_wl_put_peb(ubi, pnum, 1);
+	err = ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 1);
 	if (err || ++tries > UBI_IO_RETRIES) {
 		ubi_ro_mode(ubi);
 		leb_write_unlock(ubi, vol_id, lnum);
@@ -814,7 +818,7 @@ write_error:
 		return err;
 	}
 
-	vid_hdr->sqnum = cpu_to_be64(next_sqnum(ubi));
+	vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
 	ubi_msg("try another PEB");
 	goto retry;
 }
@@ -826,7 +830,6 @@ write_error:
  * @lnum: logical eraseblock number
  * @buf: data to write
  * @len: how many bytes to write
- * @dtype: data type
  *
  * This function changes the contents of a logical eraseblock atomically. @buf
  * has to contain new logical eraseblock data, and @len - the length of the
@@ -838,7 +841,7 @@ write_error:
  * LEB change may be done at a time. This is ensured by @ubi->alc_mutex.
  */
 int ubi_eba_atomic_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
-			      int lnum, const void *buf, int len, int dtype)
+			      int lnum, const void *buf, int len)
 {
 	int err, pnum, tries = 0, vol_id = vol->vol_id;
 	struct ubi_vid_hdr *vid_hdr;
@@ -855,7 +858,7 @@ int ubi_eba_atomic_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
 		err = ubi_eba_unmap_leb(ubi, vol, lnum);
 		if (err)
 			return err;
-		return ubi_eba_write_leb(ubi, vol, lnum, NULL, 0, 0, dtype);
+		return ubi_eba_write_leb(ubi, vol, lnum, NULL, 0, 0);
 	}
 
 	vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS);
@@ -867,7 +870,7 @@ int ubi_eba_atomic_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
 	if (err)
 		goto out_mutex;
 
-	vid_hdr->sqnum = cpu_to_be64(next_sqnum(ubi));
+	vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
 	vid_hdr->vol_id = cpu_to_be32(vol_id);
 	vid_hdr->lnum = cpu_to_be32(lnum);
 	vid_hdr->compat = ubi_get_compat(ubi, vol_id);
@@ -880,7 +883,7 @@ int ubi_eba_atomic_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
 	vid_hdr->data_crc = cpu_to_be32(crc);
 
 retry:
-	pnum = ubi_wl_get_peb(ubi, dtype);
+	pnum = ubi_wl_get_peb(ubi);
 	if (pnum < 0) {
 		err = pnum;
 		goto out_leb_unlock;
@@ -904,12 +907,14 @@ retry:
 	}
 
 	if (vol->eba_tbl[lnum] >= 0) {
-		err = ubi_wl_put_peb(ubi, vol->eba_tbl[lnum], 0);
+		err = ubi_wl_put_peb(ubi, vol_id, lnum, vol->eba_tbl[lnum], 0);
 		if (err)
 			goto out_leb_unlock;
 	}
 
+	down_read(&ubi->fm_sem);
 	vol->eba_tbl[lnum] = pnum;
+	up_read(&ubi->fm_sem);
 
 out_leb_unlock:
 	leb_write_unlock(ubi, vol_id, lnum);
@@ -929,13 +934,13 @@ write_error:
 		goto out_leb_unlock;
 	}
 
-	err = ubi_wl_put_peb(ubi, pnum, 1);
+	err = ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 1);
 	if (err || ++tries > UBI_IO_RETRIES) {
 		ubi_ro_mode(ubi);
 		goto out_leb_unlock;
 	}
 
-	vid_hdr->sqnum = cpu_to_be64(next_sqnum(ubi));
+	vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
 	ubi_msg("try another PEB");
 	goto retry;
 }
@@ -961,8 +966,8 @@ write_error:
  */
 static int is_error_sane(int err)
 {
-	if (err == -EIO || err == -ENOMEM || err == UBI_IO_BAD_VID_HDR ||
-	    err == -ETIMEDOUT)
+	if (err == -EIO || err == -ENOMEM || err == UBI_IO_BAD_HDR ||
+	    err == UBI_IO_BAD_HDR_EBADMSG || err == -ETIMEDOUT)
 		return 0;
 	return 1;
 }
@@ -978,7 +983,7 @@ static int is_error_sane(int err)
  * physical eraseblock @to. The @vid_hdr buffer may be changed by this
  * function. Returns:
  *   o %0 in case of success;
- *   o %MOVE_CANCEL_RACE, %MOVE_TARGET_WR_ERR, %MOVE_CANCEL_BITFLIPS, etc;
+ *   o %MOVE_CANCEL_RACE, %MOVE_TARGET_WR_ERR, %MOVE_TARGET_BITFLIPS, etc;
  *   o a negative error code in case of failure.
  */
 int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
@@ -1027,12 +1032,14 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
 	 * 'ubi_wl_put_peb()' function on the @ubi->move_mutex. In turn, we are
 	 * holding @ubi->move_mutex and go sleep on the LEB lock. So, if the
 	 * LEB is already locked, we just do not move it and return
-	 * %MOVE_CANCEL_RACE, which means that UBI will re-try, but later.
+	 * %MOVE_RETRY. Note, we do not return %MOVE_CANCEL_RACE here because
+	 * we do not know the reasons of the contention - it may be just a
+	 * normal I/O on this LEB, so we want to re-try.
 	 */
 	err = leb_write_trylock(ubi, vol_id, lnum);
 	if (err) {
 		dbg_wl("contention on LEB %d:%d, cancel", vol_id, lnum);
-		return MOVE_CANCEL_RACE;
+		return MOVE_RETRY;
 	}
 
 	/*
@@ -1041,22 +1048,21 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
 	 * cancel it.
 	 */
 	if (vol->eba_tbl[lnum] != from) {
-		dbg_wl("LEB %d:%d is no longer mapped to PEB %d, mapped to "
-		       "PEB %d, cancel", vol_id, lnum, from,
-		       vol->eba_tbl[lnum]);
+		dbg_wl("LEB %d:%d is no longer mapped to PEB %d, mapped to PEB %d, cancel",
+		       vol_id, lnum, from, vol->eba_tbl[lnum]);
 		err = MOVE_CANCEL_RACE;
 		goto out_unlock_leb;
 	}
 
 	/*
 	 * OK, now the LEB is locked and we can safely start moving it. Since
-	 * this function utilizes the @ubi->peb_buf1 buffer which is shared
+	 * this function utilizes the @ubi->peb_buf buffer which is shared
 	 * with some other functions - we lock the buffer by taking the
 	 * @ubi->buf_mutex.
 	 */
 	mutex_lock(&ubi->buf_mutex);
 	dbg_wl("read %d bytes of data", aldata_size);
-	err = ubi_io_read_data(ubi, ubi->peb_buf1, from, 0, aldata_size);
+	err = ubi_io_read_data(ubi, ubi->peb_buf, from, 0, aldata_size);
 	if (err && err != UBI_IO_BITFLIPS) {
 		ubi_warn("error %d while reading data from PEB %d",
 			 err, from);
@@ -1076,10 +1082,10 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
 	 */
 	if (vid_hdr->vol_type == UBI_VID_DYNAMIC)
 		aldata_size = data_size =
-			ubi_calc_data_len(ubi, ubi->peb_buf1, data_size);
+			ubi_calc_data_len(ubi, ubi->peb_buf, data_size);
 
 	cond_resched();
-	crc = crc32(UBI_CRC32_INIT, ubi->peb_buf1, data_size);
+	crc = crc32(UBI_CRC32_INIT, ubi->peb_buf, data_size);
 	cond_resched();
 
 	/*
@@ -1093,7 +1099,7 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
 		vid_hdr->data_size = cpu_to_be32(data_size);
 		vid_hdr->data_crc = cpu_to_be32(crc);
 	}
-	vid_hdr->sqnum = cpu_to_be64(next_sqnum(ubi));
+	vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
 
 	err = ubi_io_write_vid_hdr(ubi, to, vid_hdr);
 	if (err) {
@@ -1108,17 +1114,17 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
 	err = ubi_io_read_vid_hdr(ubi, to, vid_hdr, 1);
 	if (err) {
 		if (err != UBI_IO_BITFLIPS) {
-			ubi_warn("error %d while reading VID header back from "
-				  "PEB %d", err, to);
+			ubi_warn("error %d while reading VID header back from PEB %d",
+				 err, to);
 			if (is_error_sane(err))
 				err = MOVE_TARGET_RD_ERR;
 		} else
-			err = MOVE_CANCEL_BITFLIPS;
+			err = MOVE_TARGET_BITFLIPS;
 		goto out_unlock_buf;
 	}
 
 	if (data_size > 0) {
-		err = ubi_io_write_data(ubi, ubi->peb_buf1, to, 0, aldata_size);
+		err = ubi_io_write_data(ubi, ubi->peb_buf, to, 0, aldata_size);
 		if (err) {
 			if (err == -EIO)
 				err = MOVE_TARGET_WR_ERR;
@@ -1131,31 +1137,33 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
 		 * We've written the data and are going to read it back to make
 		 * sure it was written correctly.
 		 */
-
-		err = ubi_io_read_data(ubi, ubi->peb_buf2, to, 0, aldata_size);
+		memset(ubi->peb_buf, 0xFF, aldata_size);
+		err = ubi_io_read_data(ubi, ubi->peb_buf, to, 0, aldata_size);
 		if (err) {
 			if (err != UBI_IO_BITFLIPS) {
-				ubi_warn("error %d while reading data back "
-					 "from PEB %d", err, to);
+				ubi_warn("error %d while reading data back from PEB %d",
+					 err, to);
 				if (is_error_sane(err))
 					err = MOVE_TARGET_RD_ERR;
 			} else
-				err = MOVE_CANCEL_BITFLIPS;
+				err = MOVE_TARGET_BITFLIPS;
 			goto out_unlock_buf;
 		}
 
 		cond_resched();
 
-		if (memcmp(ubi->peb_buf1, ubi->peb_buf2, aldata_size)) {
-			ubi_warn("read data back from PEB %d and it is "
-				 "different", to);
+		if (crc != crc32(UBI_CRC32_INIT, ubi->peb_buf, data_size)) {
+			ubi_warn("read data back from PEB %d and it is different",
+				 to);
 			err = -EINVAL;
 			goto out_unlock_buf;
 		}
 	}
 
 	ubi_assert(vol->eba_tbl[lnum] == from);
+	down_read(&ubi->fm_sem);
 	vol->eba_tbl[lnum] = to;
+	up_read(&ubi->fm_sem);
 
 out_unlock_buf:
 	mutex_unlock(&ubi->buf_mutex);
@@ -1165,19 +1173,156 @@ out_unlock_leb:
 }
 
 /**
- * ubi_eba_init_scan - initialize the EBA sub-system using scanning information.
+ * print_rsvd_warning - warn about not having enough reserved PEBs.
+ * @ubi: UBI device description object
+ *
+ * This is a helper function for 'ubi_eba_init()' which is called when UBI
+ * cannot reserve enough PEBs for bad block handling. This function makes a
+ * decision whether we have to print a warning or not. The algorithm is as
+ * follows:
+ *   o if this is a new UBI image, then just print the warning
+ *   o if this is an UBI image which has already been used for some time, print
+ *     a warning only if we can reserve less than 10% of the expected amount of
+ *     the reserved PEB.
+ *
+ * The idea is that when UBI is used, PEBs become bad, and the reserved pool
+ * of PEBs becomes smaller, which is normal and we do not want to scare users
+ * with a warning every time they attach the MTD device. This was an issue
+ * reported by real users.
+ */
+static void print_rsvd_warning(struct ubi_device *ubi,
+			       struct ubi_attach_info *ai)
+{
+	/*
+	 * The 1 << 18 (256KiB) number is picked randomly, just a reasonably
+	 * large number to distinguish between newly flashed and used images.
+	 */
+	if (ai->max_sqnum > (1 << 18)) {
+		int min = ubi->beb_rsvd_level / 10;
+
+		if (!min)
+			min = 1;
+		if (ubi->beb_rsvd_pebs > min)
+			return;
+	}
+
+	ubi_warn("cannot reserve enough PEBs for bad PEB handling, reserved %d, need %d",
+		 ubi->beb_rsvd_pebs, ubi->beb_rsvd_level);
+	if (ubi->corr_peb_count)
+		ubi_warn("%d PEBs are corrupted and not used",
+			 ubi->corr_peb_count);
+}
+
+/**
+ * self_check_eba - run a self check on the EBA table constructed by fastmap.
+ * @ubi: UBI device description object
+ * @ai_fastmap: UBI attach info object created by fastmap
+ * @ai_scan: UBI attach info object created by scanning
+ *
+ * Returns < 0 in case of an internal error, 0 otherwise.
+ * If a bad EBA table entry was found it will be printed out and
+ * ubi_assert() triggers.
+ */
+int self_check_eba(struct ubi_device *ubi, struct ubi_attach_info *ai_fastmap,
+		   struct ubi_attach_info *ai_scan)
+{
+	int i, j, num_volumes, ret = 0;
+	int **scan_eba, **fm_eba;
+	struct ubi_ainf_volume *av;
+	struct ubi_volume *vol;
+	struct ubi_ainf_peb *aeb;
+	struct rb_node *rb;
+
+	num_volumes = ubi->vtbl_slots + UBI_INT_VOL_COUNT;
+
+	scan_eba = kmalloc(sizeof(*scan_eba) * num_volumes, GFP_KERNEL);
+	if (!scan_eba)
+		return -ENOMEM;
+
+	fm_eba = kmalloc(sizeof(*fm_eba) * num_volumes, GFP_KERNEL);
+	if (!fm_eba) {
+		kfree(scan_eba);
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < num_volumes; i++) {
+		vol = ubi->volumes[i];
+		if (!vol)
+			continue;
+
+		scan_eba[i] = kmalloc(vol->reserved_pebs * sizeof(**scan_eba),
+				      GFP_KERNEL);
+		if (!scan_eba[i]) {
+			ret = -ENOMEM;
+			goto out_free;
+		}
+
+		fm_eba[i] = kmalloc(vol->reserved_pebs * sizeof(**fm_eba),
+				    GFP_KERNEL);
+		if (!fm_eba[i]) {
+			ret = -ENOMEM;
+			goto out_free;
+		}
+
+		for (j = 0; j < vol->reserved_pebs; j++)
+			scan_eba[i][j] = fm_eba[i][j] = UBI_LEB_UNMAPPED;
+
+		av = ubi_find_av(ai_scan, idx2vol_id(ubi, i));
+		if (!av)
+			continue;
+
+		ubi_rb_for_each_entry(rb, aeb, &av->root, u.rb)
+			scan_eba[i][aeb->lnum] = aeb->pnum;
+
+		av = ubi_find_av(ai_fastmap, idx2vol_id(ubi, i));
+		if (!av)
+			continue;
+
+		ubi_rb_for_each_entry(rb, aeb, &av->root, u.rb)
+			fm_eba[i][aeb->lnum] = aeb->pnum;
+
+		for (j = 0; j < vol->reserved_pebs; j++) {
+			if (scan_eba[i][j] != fm_eba[i][j]) {
+				if (scan_eba[i][j] == UBI_LEB_UNMAPPED ||
+					fm_eba[i][j] == UBI_LEB_UNMAPPED)
+					continue;
+
+				ubi_err("LEB:%i:%i is PEB:%i instead of %i!",
+					vol->vol_id, i, fm_eba[i][j],
+					scan_eba[i][j]);
+				ubi_assert(0);
+			}
+		}
+	}
+
+out_free:
+	for (i = 0; i < num_volumes; i++) {
+		if (!ubi->volumes[i])
+			continue;
+
+		kfree(scan_eba[i]);
+		kfree(fm_eba[i]);
+	}
+
+	kfree(scan_eba);
+	kfree(fm_eba);
+	return ret;
+}
+
+/**
+ * ubi_eba_init - initialize the EBA sub-system using attaching information.
  * @ubi: UBI device description object
- * @si: scanning information
+ * @ai: attaching information
  *
  * This function returns zero in case of success and a negative error code in
  * case of failure.
  */
-int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
+int ubi_eba_init(struct ubi_device *ubi, struct ubi_attach_info *ai)
 {
 	int i, j, err, num_volumes;
-	struct ubi_scan_volume *sv;
+	struct ubi_ainf_volume *av;
 	struct ubi_volume *vol;
-	struct ubi_scan_leb *seb;
+	struct ubi_ainf_peb *aeb;
 	struct rb_node *rb;
 
 	dbg_eba("initialize EBA sub-system");
@@ -1186,7 +1331,7 @@ int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
 	mutex_init(&ubi->alc_mutex);
 	ubi->ltree = RB_ROOT;
 
-	ubi->global_sqnum = si->max_sqnum + 1;
+	ubi->global_sqnum = ai->max_sqnum + 1;
 	num_volumes = ubi->vtbl_slots + UBI_INT_VOL_COUNT;
 
 	for (i = 0; i < num_volumes; i++) {
@@ -1206,24 +1351,27 @@ int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
 		for (j = 0; j < vol->reserved_pebs; j++)
 			vol->eba_tbl[j] = UBI_LEB_UNMAPPED;
 
-		sv = ubi_scan_find_sv(si, idx2vol_id(ubi, i));
-		if (!sv)
+		av = ubi_find_av(ai, idx2vol_id(ubi, i));
+		if (!av)
 			continue;
 
-		ubi_rb_for_each_entry(rb, seb, &sv->root, u.rb) {
-			if (seb->lnum >= vol->reserved_pebs)
+		ubi_rb_for_each_entry(rb, aeb, &av->root, u.rb) {
+			if (aeb->lnum >= vol->reserved_pebs)
 				/*
 				 * This may happen in case of an unclean reboot
 				 * during re-size.
 				 */
-				ubi_scan_move_to_list(sv, seb, &si->erase);
-			vol->eba_tbl[seb->lnum] = seb->pnum;
+				ubi_move_aeb_to_list(av, aeb, &ai->erase);
+			vol->eba_tbl[aeb->lnum] = aeb->pnum;
 		}
 	}
 
 	if (ubi->avail_pebs < EBA_RESERVED_PEBS) {
 		ubi_err("no enough physical eraseblocks (%d, need %d)",
 			ubi->avail_pebs, EBA_RESERVED_PEBS);
+		if (ubi->corr_peb_count)
+			ubi_err("%d PEBs are corrupted and not used",
+				ubi->corr_peb_count);
 		err = -ENOSPC;
 		goto out_free;
 	}
@@ -1236,9 +1384,7 @@ int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
 		if (ubi->avail_pebs < ubi->beb_rsvd_level) {
 			/* No enough free physical eraseblocks */
 			ubi->beb_rsvd_pebs = ubi->avail_pebs;
-			ubi_warn("cannot reserve enough PEBs for bad PEB "
-				 "handling, reserved %d, need %d",
-				 ubi->beb_rsvd_pebs, ubi->beb_rsvd_level);
+			print_rsvd_warning(ubi, ai);
 		} else
 			ubi->beb_rsvd_pebs = ubi->beb_rsvd_level;
 
diff --git a/drivers/mtd/ubi/fastmap.c b/drivers/mtd/ubi/fastmap.c
new file mode 100644
index 00000000000..0431b46d9fd
--- /dev/null
+++ b/drivers/mtd/ubi/fastmap.c
@@ -0,0 +1,1567 @@
+/*
+ * Copyright (c) 2012 Linutronix GmbH
+ * Author: Richard Weinberger <richard@nod.at>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ */
+
+#include <linux/crc32.h>
+#include "ubi.h"
+
+/**
+ * ubi_calc_fm_size - calculates the fastmap size in bytes for an UBI device.
+ * @ubi: UBI device description object
+ */
+size_t ubi_calc_fm_size(struct ubi_device *ubi)
+{
+	size_t size;
+
+	size = sizeof(struct ubi_fm_hdr) + \
+		sizeof(struct ubi_fm_scan_pool) + \
+		sizeof(struct ubi_fm_scan_pool) + \
+		(ubi->peb_count * sizeof(struct ubi_fm_ec)) + \
+		(sizeof(struct ubi_fm_eba) + \
+		(ubi->peb_count * sizeof(__be32))) + \
+		sizeof(struct ubi_fm_volhdr) * UBI_MAX_VOLUMES;
+	return roundup(size, ubi->leb_size);
+}
+
+
+/**
+ * new_fm_vhdr - allocate a new volume header for fastmap usage.
+ * @ubi: UBI device description object
+ * @vol_id: the VID of the new header
+ *
+ * Returns a new struct ubi_vid_hdr on success.
+ * NULL indicates out of memory.
+ */
+static struct ubi_vid_hdr *new_fm_vhdr(struct ubi_device *ubi, int vol_id)
+{
+	struct ubi_vid_hdr *new;
+
+	new = ubi_zalloc_vid_hdr(ubi, GFP_KERNEL);
+	if (!new)
+		goto out;
+
+	new->vol_type = UBI_VID_DYNAMIC;
+	new->vol_id = cpu_to_be32(vol_id);
+
+	/* UBI implementations without fastmap support have to delete the
+	 * fastmap.
+	 */
+	new->compat = UBI_COMPAT_DELETE;
+
+out:
+	return new;
+}
+
+/**
+ * add_aeb - create and add a attach erase block to a given list.
+ * @ai: UBI attach info object
+ * @list: the target list
+ * @pnum: PEB number of the new attach erase block
+ * @ec: erease counter of the new LEB
+ * @scrub: scrub this PEB after attaching
+ *
+ * Returns 0 on success, < 0 indicates an internal error.
+ */
+static int add_aeb(struct ubi_attach_info *ai, struct list_head *list,
+		   int pnum, int ec, int scrub)
+{
+	struct ubi_ainf_peb *aeb;
+
+	aeb = kmem_cache_alloc(ai->aeb_slab_cache, GFP_KERNEL);
+	if (!aeb)
+		return -ENOMEM;
+
+	aeb->pnum = pnum;
+	aeb->ec = ec;
+	aeb->lnum = -1;
+	aeb->scrub = scrub;
+	aeb->copy_flag = aeb->sqnum = 0;
+
+	ai->ec_sum += aeb->ec;
+	ai->ec_count++;
+
+	if (ai->max_ec < aeb->ec)
+		ai->max_ec = aeb->ec;
+
+	if (ai->min_ec > aeb->ec)
+		ai->min_ec = aeb->ec;
+
+	list_add_tail(&aeb->u.list, list);
+
+	return 0;
+}
+
+/**
+ * add_vol - create and add a new volume to ubi_attach_info.
+ * @ai: ubi_attach_info object
+ * @vol_id: VID of the new volume
+ * @used_ebs: number of used EBS
+ * @data_pad: data padding value of the new volume
+ * @vol_type: volume type
+ * @last_eb_bytes: number of bytes in the last LEB
+ *
+ * Returns the new struct ubi_ainf_volume on success.
+ * NULL indicates an error.
+ */
+static struct ubi_ainf_volume *add_vol(struct ubi_attach_info *ai, int vol_id,
+				       int used_ebs, int data_pad, u8 vol_type,
+				       int last_eb_bytes)
+{
+	struct ubi_ainf_volume *av;
+	struct rb_node **p = &ai->volumes.rb_node, *parent = NULL;
+
+	while (*p) {
+		parent = *p;
+		av = rb_entry(parent, struct ubi_ainf_volume, rb);
+
+		if (vol_id > av->vol_id)
+			p = &(*p)->rb_left;
+		else
+			p = &(*p)->rb_right;
+	}
+
+	av = kmalloc(sizeof(struct ubi_ainf_volume), GFP_KERNEL);
+	if (!av)
+		goto out;
+
+	av->highest_lnum = av->leb_count = 0;
+	av->vol_id = vol_id;
+	av->used_ebs = used_ebs;
+	av->data_pad = data_pad;
+	av->last_data_size = last_eb_bytes;
+	av->compat = 0;
+	av->vol_type = vol_type;
+	av->root = RB_ROOT;
+
+	dbg_bld("found volume (ID %i)", vol_id);
+
+	rb_link_node(&av->rb, parent, p);
+	rb_insert_color(&av->rb, &ai->volumes);
+
+out:
+	return av;
+}
+
+/**
+ * assign_aeb_to_av - assigns a SEB to a given ainf_volume and removes it
+ * from it's original list.
+ * @ai: ubi_attach_info object
+ * @aeb: the to be assigned SEB
+ * @av: target scan volume
+ */
+static void assign_aeb_to_av(struct ubi_attach_info *ai,
+			     struct ubi_ainf_peb *aeb,
+			     struct ubi_ainf_volume *av)
+{
+	struct ubi_ainf_peb *tmp_aeb;
+	struct rb_node **p = &ai->volumes.rb_node, *parent = NULL;
+
+	p = &av->root.rb_node;
+	while (*p) {
+		parent = *p;
+
+		tmp_aeb = rb_entry(parent, struct ubi_ainf_peb, u.rb);
+		if (aeb->lnum != tmp_aeb->lnum) {
+			if (aeb->lnum < tmp_aeb->lnum)
+				p = &(*p)->rb_left;
+			else
+				p = &(*p)->rb_right;
+
+			continue;
+		} else
+			break;
+	}
+
+	list_del(&aeb->u.list);
+	av->leb_count++;
+
+	rb_link_node(&aeb->u.rb, parent, p);
+	rb_insert_color(&aeb->u.rb, &av->root);
+}
+
+/**
+ * update_vol - inserts or updates a LEB which was found a pool.
+ * @ubi: the UBI device object
+ * @ai: attach info object
+ * @av: the volume this LEB belongs to
+ * @new_vh: the volume header derived from new_aeb
+ * @new_aeb: the AEB to be examined
+ *
+ * Returns 0 on success, < 0 indicates an internal error.
+ */
+static int update_vol(struct ubi_device *ubi, struct ubi_attach_info *ai,
+		      struct ubi_ainf_volume *av, struct ubi_vid_hdr *new_vh,
+		      struct ubi_ainf_peb *new_aeb)
+{
+	struct rb_node **p = &av->root.rb_node, *parent = NULL;
+	struct ubi_ainf_peb *aeb, *victim;
+	int cmp_res;
+
+	while (*p) {
+		parent = *p;
+		aeb = rb_entry(parent, struct ubi_ainf_peb, u.rb);
+
+		if (be32_to_cpu(new_vh->lnum) != aeb->lnum) {
+			if (be32_to_cpu(new_vh->lnum) < aeb->lnum)
+				p = &(*p)->rb_left;
+			else
+				p = &(*p)->rb_right;
+
+			continue;
+		}
+
+		/* This case can happen if the fastmap gets written
+		 * because of a volume change (creation, deletion, ..).
+		 * Then a PEB can be within the persistent EBA and the pool.
+		 */
+		if (aeb->pnum == new_aeb->pnum) {
+			ubi_assert(aeb->lnum == new_aeb->lnum);
+			kmem_cache_free(ai->aeb_slab_cache, new_aeb);
+
+			return 0;
+		}
+
+		cmp_res = ubi_compare_lebs(ubi, aeb, new_aeb->pnum, new_vh);
+		if (cmp_res < 0)
+			return cmp_res;
+
+		/* new_aeb is newer */
+		if (cmp_res & 1) {
+			victim = kmem_cache_alloc(ai->aeb_slab_cache,
+				GFP_KERNEL);
+			if (!victim)
+				return -ENOMEM;
+
+			victim->ec = aeb->ec;
+			victim->pnum = aeb->pnum;
+			list_add_tail(&victim->u.list, &ai->erase);
+
+			if (av->highest_lnum == be32_to_cpu(new_vh->lnum))
+				av->last_data_size = \
+					be32_to_cpu(new_vh->data_size);
+
+			dbg_bld("vol %i: AEB %i's PEB %i is the newer",
+				av->vol_id, aeb->lnum, new_aeb->pnum);
+
+			aeb->ec = new_aeb->ec;
+			aeb->pnum = new_aeb->pnum;
+			aeb->copy_flag = new_vh->copy_flag;
+			aeb->scrub = new_aeb->scrub;
+			kmem_cache_free(ai->aeb_slab_cache, new_aeb);
+
+		/* new_aeb is older */
+		} else {
+			dbg_bld("vol %i: AEB %i's PEB %i is old, dropping it",
+				av->vol_id, aeb->lnum, new_aeb->pnum);
+			list_add_tail(&new_aeb->u.list, &ai->erase);
+		}
+
+		return 0;
+	}
+	/* This LEB is new, let's add it to the volume */
+
+	if (av->highest_lnum <= be32_to_cpu(new_vh->lnum)) {
+		av->highest_lnum = be32_to_cpu(new_vh->lnum);
+		av->last_data_size = be32_to_cpu(new_vh->data_size);
+	}
+
+	if (av->vol_type == UBI_STATIC_VOLUME)
+		av->used_ebs = be32_to_cpu(new_vh->used_ebs);
+
+	av->leb_count++;
+
+	rb_link_node(&new_aeb->u.rb, parent, p);
+	rb_insert_color(&new_aeb->u.rb, &av->root);
+
+	return 0;
+}
+
+/**
+ * process_pool_aeb - we found a non-empty PEB in a pool.
+ * @ubi: UBI device object
+ * @ai: attach info object
+ * @new_vh: the volume header derived from new_aeb
+ * @new_aeb: the AEB to be examined
+ *
+ * Returns 0 on success, < 0 indicates an internal error.
+ */
+static int process_pool_aeb(struct ubi_device *ubi, struct ubi_attach_info *ai,
+			    struct ubi_vid_hdr *new_vh,
+			    struct ubi_ainf_peb *new_aeb)
+{
+	struct ubi_ainf_volume *av, *tmp_av = NULL;
+	struct rb_node **p = &ai->volumes.rb_node, *parent = NULL;
+	int found = 0;
+
+	if (be32_to_cpu(new_vh->vol_id) == UBI_FM_SB_VOLUME_ID ||
+		be32_to_cpu(new_vh->vol_id) == UBI_FM_DATA_VOLUME_ID) {
+		kmem_cache_free(ai->aeb_slab_cache, new_aeb);
+
+		return 0;
+	}
+
+	/* Find the volume this SEB belongs to */
+	while (*p) {
+		parent = *p;
+		tmp_av = rb_entry(parent, struct ubi_ainf_volume, rb);
+
+		if (be32_to_cpu(new_vh->vol_id) > tmp_av->vol_id)
+			p = &(*p)->rb_left;
+		else if (be32_to_cpu(new_vh->vol_id) < tmp_av->vol_id)
+			p = &(*p)->rb_right;
+		else {
+			found = 1;
+			break;
+		}
+	}
+
+	if (found)
+		av = tmp_av;
+	else {
+		ubi_err("orphaned volume in fastmap pool!");
+		return UBI_BAD_FASTMAP;
+	}
+
+	ubi_assert(be32_to_cpu(new_vh->vol_id) == av->vol_id);
+
+	return update_vol(ubi, ai, av, new_vh, new_aeb);
+}
+
+/**
+ * unmap_peb - unmap a PEB.
+ * If fastmap detects a free PEB in the pool it has to check whether
+ * this PEB has been unmapped after writing the fastmap.
+ *
+ * @ai: UBI attach info object
+ * @pnum: The PEB to be unmapped
+ */
+static void unmap_peb(struct ubi_attach_info *ai, int pnum)
+{
+	struct ubi_ainf_volume *av;
+	struct rb_node *node, *node2;
+	struct ubi_ainf_peb *aeb;
+
+	for (node = rb_first(&ai->volumes); node; node = rb_next(node)) {
+		av = rb_entry(node, struct ubi_ainf_volume, rb);
+
+		for (node2 = rb_first(&av->root); node2;
+		     node2 = rb_next(node2)) {
+			aeb = rb_entry(node2, struct ubi_ainf_peb, u.rb);
+			if (aeb->pnum == pnum) {
+				rb_erase(&aeb->u.rb, &av->root);
+				kmem_cache_free(ai->aeb_slab_cache, aeb);
+				return;
+			}
+		}
+	}
+}
+
+/**
+ * scan_pool - scans a pool for changed (no longer empty PEBs).
+ * @ubi: UBI device object
+ * @ai: attach info object
+ * @pebs: an array of all PEB numbers in the to be scanned pool
+ * @pool_size: size of the pool (number of entries in @pebs)
+ * @max_sqnum: pointer to the maximal sequence number
+ * @eba_orphans: list of PEBs which need to be scanned
+ * @free: list of PEBs which are most likely free (and go into @ai->free)
+ *
+ * Returns 0 on success, if the pool is unusable UBI_BAD_FASTMAP is returned.
+ * < 0 indicates an internal error.
+ */
+static int scan_pool(struct ubi_device *ubi, struct ubi_attach_info *ai,
+		     int *pebs, int pool_size, unsigned long long *max_sqnum,
+		     struct list_head *eba_orphans, struct list_head *free)
+{
+	struct ubi_vid_hdr *vh;
+	struct ubi_ec_hdr *ech;
+	struct ubi_ainf_peb *new_aeb, *tmp_aeb;
+	int i, pnum, err, found_orphan, ret = 0;
+
+	ech = kzalloc(ubi->ec_hdr_alsize, GFP_KERNEL);
+	if (!ech)
+		return -ENOMEM;
+
+	vh = ubi_zalloc_vid_hdr(ubi, GFP_KERNEL);
+	if (!vh) {
+		kfree(ech);
+		return -ENOMEM;
+	}
+
+	dbg_bld("scanning fastmap pool: size = %i", pool_size);
+
+	/*
+	 * Now scan all PEBs in the pool to find changes which have been made
+	 * after the creation of the fastmap
+	 */
+	for (i = 0; i < pool_size; i++) {
+		int scrub = 0;
+		int image_seq;
+
+		pnum = be32_to_cpu(pebs[i]);
+
+		if (ubi_io_is_bad(ubi, pnum)) {
+			ubi_err("bad PEB in fastmap pool!");
+			ret = UBI_BAD_FASTMAP;
+			goto out;
+		}
+
+		err = ubi_io_read_ec_hdr(ubi, pnum, ech, 0);
+		if (err && err != UBI_IO_BITFLIPS) {
+			ubi_err("unable to read EC header! PEB:%i err:%i",
+				pnum, err);
+			ret = err > 0 ? UBI_BAD_FASTMAP : err;
+			goto out;
+		} else if (err == UBI_IO_BITFLIPS)
+			scrub = 1;
+
+		/*
+		 * Older UBI implementations have image_seq set to zero, so
+		 * we shouldn't fail if image_seq == 0.
+		 */
+		image_seq = be32_to_cpu(ech->image_seq);
+
+		if (image_seq && (image_seq != ubi->image_seq)) {
+			ubi_err("bad image seq: 0x%x, expected: 0x%x",
+				be32_to_cpu(ech->image_seq), ubi->image_seq);
+			ret = UBI_BAD_FASTMAP;
+			goto out;
+		}
+
+		err = ubi_io_read_vid_hdr(ubi, pnum, vh, 0);
+		if (err == UBI_IO_FF || err == UBI_IO_FF_BITFLIPS) {
+			unsigned long long ec = be64_to_cpu(ech->ec);
+			unmap_peb(ai, pnum);
+			dbg_bld("Adding PEB to free: %i", pnum);
+			if (err == UBI_IO_FF_BITFLIPS)
+				add_aeb(ai, free, pnum, ec, 1);
+			else
+				add_aeb(ai, free, pnum, ec, 0);
+			continue;
+		} else if (err == 0 || err == UBI_IO_BITFLIPS) {
+			dbg_bld("Found non empty PEB:%i in pool", pnum);
+
+			if (err == UBI_IO_BITFLIPS)
+				scrub = 1;
+
+			found_orphan = 0;
+			list_for_each_entry(tmp_aeb, eba_orphans, u.list) {
+				if (tmp_aeb->pnum == pnum) {
+					found_orphan = 1;
+					break;
+				}
+			}
+			if (found_orphan) {
+				list_del(&tmp_aeb->u.list);
+				kmem_cache_free(ai->aeb_slab_cache, tmp_aeb);
+			}
+
+			new_aeb = kmem_cache_alloc(ai->aeb_slab_cache,
+						   GFP_KERNEL);
+			if (!new_aeb) {
+				ret = -ENOMEM;
+				goto out;
+			}
+
+			new_aeb->ec = be64_to_cpu(ech->ec);
+			new_aeb->pnum = pnum;
+			new_aeb->lnum = be32_to_cpu(vh->lnum);
+			new_aeb->sqnum = be64_to_cpu(vh->sqnum);
+			new_aeb->copy_flag = vh->copy_flag;
+			new_aeb->scrub = scrub;
+
+			if (*max_sqnum < new_aeb->sqnum)
+				*max_sqnum = new_aeb->sqnum;
+
+			err = process_pool_aeb(ubi, ai, vh, new_aeb);
+			if (err) {
+				ret = err > 0 ? UBI_BAD_FASTMAP : err;
+				goto out;
+			}
+		} else {
+			/* We are paranoid and fall back to scanning mode */
+			ubi_err("fastmap pool PEBs contains damaged PEBs!");
+			ret = err > 0 ? UBI_BAD_FASTMAP : err;
+			goto out;
+		}
+
+	}
+
+out:
+	ubi_free_vid_hdr(ubi, vh);
+	kfree(ech);
+	return ret;
+}
+
+/**
+ * count_fastmap_pebs - Counts the PEBs found by fastmap.
+ * @ai: The UBI attach info object
+ */
+static int count_fastmap_pebs(struct ubi_attach_info *ai)
+{
+	struct ubi_ainf_peb *aeb;
+	struct ubi_ainf_volume *av;
+	struct rb_node *rb1, *rb2;
+	int n = 0;
+
+	list_for_each_entry(aeb, &ai->erase, u.list)
+		n++;
+
+	list_for_each_entry(aeb, &ai->free, u.list)
+		n++;
+
+	 ubi_rb_for_each_entry(rb1, av, &ai->volumes, rb)
+		ubi_rb_for_each_entry(rb2, aeb, &av->root, u.rb)
+			n++;
+
+	return n;
+}
+
+/**
+ * ubi_attach_fastmap - creates ubi_attach_info from a fastmap.
+ * @ubi: UBI device object
+ * @ai: UBI attach info object
+ * @fm: the fastmap to be attached
+ *
+ * Returns 0 on success, UBI_BAD_FASTMAP if the found fastmap was unusable.
+ * < 0 indicates an internal error.
+ */
+static int ubi_attach_fastmap(struct ubi_device *ubi,
+			      struct ubi_attach_info *ai,
+			      struct ubi_fastmap_layout *fm)
+{
+	struct list_head used, eba_orphans, free;
+	struct ubi_ainf_volume *av;
+	struct ubi_ainf_peb *aeb, *tmp_aeb, *_tmp_aeb;
+	struct ubi_ec_hdr *ech;
+	struct ubi_fm_sb *fmsb;
+	struct ubi_fm_hdr *fmhdr;
+	struct ubi_fm_scan_pool *fmpl1, *fmpl2;
+	struct ubi_fm_ec *fmec;
+	struct ubi_fm_volhdr *fmvhdr;
+	struct ubi_fm_eba *fm_eba;
+	int ret, i, j, pool_size, wl_pool_size;
+	size_t fm_pos = 0, fm_size = ubi->fm_size;
+	unsigned long long max_sqnum = 0;
+	void *fm_raw = ubi->fm_buf;
+
+	INIT_LIST_HEAD(&used);
+	INIT_LIST_HEAD(&free);
+	INIT_LIST_HEAD(&eba_orphans);
+	INIT_LIST_HEAD(&ai->corr);
+	INIT_LIST_HEAD(&ai->free);
+	INIT_LIST_HEAD(&ai->erase);
+	INIT_LIST_HEAD(&ai->alien);
+	ai->volumes = RB_ROOT;
+	ai->min_ec = UBI_MAX_ERASECOUNTER;
+
+	ai->aeb_slab_cache = kmem_cache_create("ubi_ainf_peb_slab",
+					       sizeof(struct ubi_ainf_peb),
+					       0, 0, NULL);
+	if (!ai->aeb_slab_cache) {
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	fmsb = (struct ubi_fm_sb *)(fm_raw);
+	ai->max_sqnum = fmsb->sqnum;
+	fm_pos += sizeof(struct ubi_fm_sb);
+	if (fm_pos >= fm_size)
+		goto fail_bad;
+
+	fmhdr = (struct ubi_fm_hdr *)(fm_raw + fm_pos);
+	fm_pos += sizeof(*fmhdr);
+	if (fm_pos >= fm_size)
+		goto fail_bad;
+
+	if (be32_to_cpu(fmhdr->magic) != UBI_FM_HDR_MAGIC) {
+		ubi_err("bad fastmap header magic: 0x%x, expected: 0x%x",
+			be32_to_cpu(fmhdr->magic), UBI_FM_HDR_MAGIC);
+		goto fail_bad;
+	}
+
+	fmpl1 = (struct ubi_fm_scan_pool *)(fm_raw + fm_pos);
+	fm_pos += sizeof(*fmpl1);
+	if (fm_pos >= fm_size)
+		goto fail_bad;
+	if (be32_to_cpu(fmpl1->magic) != UBI_FM_POOL_MAGIC) {
+		ubi_err("bad fastmap pool magic: 0x%x, expected: 0x%x",
+			be32_to_cpu(fmpl1->magic), UBI_FM_POOL_MAGIC);
+		goto fail_bad;
+	}
+
+	fmpl2 = (struct ubi_fm_scan_pool *)(fm_raw + fm_pos);
+	fm_pos += sizeof(*fmpl2);
+	if (fm_pos >= fm_size)
+		goto fail_bad;
+	if (be32_to_cpu(fmpl2->magic) != UBI_FM_POOL_MAGIC) {
+		ubi_err("bad fastmap pool magic: 0x%x, expected: 0x%x",
+			be32_to_cpu(fmpl2->magic), UBI_FM_POOL_MAGIC);
+		goto fail_bad;
+	}
+
+	pool_size = be16_to_cpu(fmpl1->size);
+	wl_pool_size = be16_to_cpu(fmpl2->size);
+	fm->max_pool_size = be16_to_cpu(fmpl1->max_size);
+	fm->max_wl_pool_size = be16_to_cpu(fmpl2->max_size);
+
+	if (pool_size > UBI_FM_MAX_POOL_SIZE || pool_size < 0) {
+		ubi_err("bad pool size: %i", pool_size);
+		goto fail_bad;
+	}
+
+	if (wl_pool_size > UBI_FM_MAX_POOL_SIZE || wl_pool_size < 0) {
+		ubi_err("bad WL pool size: %i", wl_pool_size);
+		goto fail_bad;
+	}
+
+
+	if (fm->max_pool_size > UBI_FM_MAX_POOL_SIZE ||
+	    fm->max_pool_size < 0) {
+		ubi_err("bad maximal pool size: %i", fm->max_pool_size);
+		goto fail_bad;
+	}
+
+	if (fm->max_wl_pool_size > UBI_FM_MAX_POOL_SIZE ||
+	    fm->max_wl_pool_size < 0) {
+		ubi_err("bad maximal WL pool size: %i", fm->max_wl_pool_size);
+		goto fail_bad;
+	}
+
+	/* read EC values from free list */
+	for (i = 0; i < be32_to_cpu(fmhdr->free_peb_count); i++) {
+		fmec = (struct ubi_fm_ec *)(fm_raw + fm_pos);
+		fm_pos += sizeof(*fmec);
+		if (fm_pos >= fm_size)
+			goto fail_bad;
+
+		add_aeb(ai, &ai->free, be32_to_cpu(fmec->pnum),
+			be32_to_cpu(fmec->ec), 0);
+	}
+
+	/* read EC values from used list */
+	for (i = 0; i < be32_to_cpu(fmhdr->used_peb_count); i++) {
+		fmec = (struct ubi_fm_ec *)(fm_raw + fm_pos);
+		fm_pos += sizeof(*fmec);
+		if (fm_pos >= fm_size)
+			goto fail_bad;
+
+		add_aeb(ai, &used, be32_to_cpu(fmec->pnum),
+			be32_to_cpu(fmec->ec), 0);
+	}
+
+	/* read EC values from scrub list */
+	for (i = 0; i < be32_to_cpu(fmhdr->scrub_peb_count); i++) {
+		fmec = (struct ubi_fm_ec *)(fm_raw + fm_pos);
+		fm_pos += sizeof(*fmec);
+		if (fm_pos >= fm_size)
+			goto fail_bad;
+
+		add_aeb(ai, &used, be32_to_cpu(fmec->pnum),
+			be32_to_cpu(fmec->ec), 1);
+	}
+
+	/* read EC values from erase list */
+	for (i = 0; i < be32_to_cpu(fmhdr->erase_peb_count); i++) {
+		fmec = (struct ubi_fm_ec *)(fm_raw + fm_pos);
+		fm_pos += sizeof(*fmec);
+		if (fm_pos >= fm_size)
+			goto fail_bad;
+
+		add_aeb(ai, &ai->erase, be32_to_cpu(fmec->pnum),
+			be32_to_cpu(fmec->ec), 1);
+	}
+
+	ai->mean_ec = div_u64(ai->ec_sum, ai->ec_count);
+	ai->bad_peb_count = be32_to_cpu(fmhdr->bad_peb_count);
+
+	/* Iterate over all volumes and read their EBA table */
+	for (i = 0; i < be32_to_cpu(fmhdr->vol_count); i++) {
+		fmvhdr = (struct ubi_fm_volhdr *)(fm_raw + fm_pos);
+		fm_pos += sizeof(*fmvhdr);
+		if (fm_pos >= fm_size)
+			goto fail_bad;
+
+		if (be32_to_cpu(fmvhdr->magic) != UBI_FM_VHDR_MAGIC) {
+			ubi_err("bad fastmap vol header magic: 0x%x, " \
+				"expected: 0x%x",
+				be32_to_cpu(fmvhdr->magic), UBI_FM_VHDR_MAGIC);
+			goto fail_bad;
+		}
+
+		av = add_vol(ai, be32_to_cpu(fmvhdr->vol_id),
+			     be32_to_cpu(fmvhdr->used_ebs),
+			     be32_to_cpu(fmvhdr->data_pad),
+			     fmvhdr->vol_type,
+			     be32_to_cpu(fmvhdr->last_eb_bytes));
+
+		if (!av)
+			goto fail_bad;
+
+		ai->vols_found++;
+		if (ai->highest_vol_id < be32_to_cpu(fmvhdr->vol_id))
+			ai->highest_vol_id = be32_to_cpu(fmvhdr->vol_id);
+
+		fm_eba = (struct ubi_fm_eba *)(fm_raw + fm_pos);
+		fm_pos += sizeof(*fm_eba);
+		fm_pos += (sizeof(__be32) * be32_to_cpu(fm_eba->reserved_pebs));
+		if (fm_pos >= fm_size)
+			goto fail_bad;
+
+		if (be32_to_cpu(fm_eba->magic) != UBI_FM_EBA_MAGIC) {
+			ubi_err("bad fastmap EBA header magic: 0x%x, " \
+				"expected: 0x%x",
+				be32_to_cpu(fm_eba->magic), UBI_FM_EBA_MAGIC);
+			goto fail_bad;
+		}
+
+		for (j = 0; j < be32_to_cpu(fm_eba->reserved_pebs); j++) {
+			int pnum = be32_to_cpu(fm_eba->pnum[j]);
+
+			if ((int)be32_to_cpu(fm_eba->pnum[j]) < 0)
+				continue;
+
+			aeb = NULL;
+			list_for_each_entry(tmp_aeb, &used, u.list) {
+				if (tmp_aeb->pnum == pnum) {
+					aeb = tmp_aeb;
+					break;
+				}
+			}
+
+			/* This can happen if a PEB is already in an EBA known
+			 * by this fastmap but the PEB itself is not in the used
+			 * list.
+			 * In this case the PEB can be within the fastmap pool
+			 * or while writing the fastmap it was in the protection
+			 * queue.
+			 */
+			if (!aeb) {
+				aeb = kmem_cache_alloc(ai->aeb_slab_cache,
+						       GFP_KERNEL);
+				if (!aeb) {
+					ret = -ENOMEM;
+
+					goto fail;
+				}
+
+				aeb->lnum = j;
+				aeb->pnum = be32_to_cpu(fm_eba->pnum[j]);
+				aeb->ec = -1;
+				aeb->scrub = aeb->copy_flag = aeb->sqnum = 0;
+				list_add_tail(&aeb->u.list, &eba_orphans);
+				continue;
+			}
+
+			aeb->lnum = j;
+
+			if (av->highest_lnum <= aeb->lnum)
+				av->highest_lnum = aeb->lnum;
+
+			assign_aeb_to_av(ai, aeb, av);
+
+			dbg_bld("inserting PEB:%i (LEB %i) to vol %i",
+				aeb->pnum, aeb->lnum, av->vol_id);
+		}
+
+		ech = kzalloc(ubi->ec_hdr_alsize, GFP_KERNEL);
+		if (!ech) {
+			ret = -ENOMEM;
+			goto fail;
+		}
+
+		list_for_each_entry_safe(tmp_aeb, _tmp_aeb, &eba_orphans,
+					 u.list) {
+			int err;
+
+			if (ubi_io_is_bad(ubi, tmp_aeb->pnum)) {
+				ubi_err("bad PEB in fastmap EBA orphan list");
+				ret = UBI_BAD_FASTMAP;
+				kfree(ech);
+				goto fail;
+			}
+
+			err = ubi_io_read_ec_hdr(ubi, tmp_aeb->pnum, ech, 0);
+			if (err && err != UBI_IO_BITFLIPS) {
+				ubi_err("unable to read EC header! PEB:%i " \
+					"err:%i", tmp_aeb->pnum, err);
+				ret = err > 0 ? UBI_BAD_FASTMAP : err;
+				kfree(ech);
+
+				goto fail;
+			} else if (err == UBI_IO_BITFLIPS)
+				tmp_aeb->scrub = 1;
+
+			tmp_aeb->ec = be64_to_cpu(ech->ec);
+			assign_aeb_to_av(ai, tmp_aeb, av);
+		}
+
+		kfree(ech);
+	}
+
+	ret = scan_pool(ubi, ai, fmpl1->pebs, pool_size, &max_sqnum,
+			&eba_orphans, &free);
+	if (ret)
+		goto fail;
+
+	ret = scan_pool(ubi, ai, fmpl2->pebs, wl_pool_size, &max_sqnum,
+			&eba_orphans, &free);
+	if (ret)
+		goto fail;
+
+	if (max_sqnum > ai->max_sqnum)
+		ai->max_sqnum = max_sqnum;
+
+	list_for_each_entry_safe(tmp_aeb, _tmp_aeb, &free, u.list)
+		list_move_tail(&tmp_aeb->u.list, &ai->free);
+
+	ubi_assert(list_empty(&used));
+	ubi_assert(list_empty(&eba_orphans));
+	ubi_assert(list_empty(&free));
+
+	/*
+	 * If fastmap is leaking PEBs (must not happen), raise a
+	 * fat warning and fall back to scanning mode.
+	 * We do this here because in ubi_wl_init() it's too late
+	 * and we cannot fall back to scanning.
+	 */
+	if (WARN_ON(count_fastmap_pebs(ai) != ubi->peb_count -
+		    ai->bad_peb_count - fm->used_blocks))
+		goto fail_bad;
+
+	return 0;
+
+fail_bad:
+	ret = UBI_BAD_FASTMAP;
+fail:
+	list_for_each_entry_safe(tmp_aeb, _tmp_aeb, &used, u.list) {
+		list_del(&tmp_aeb->u.list);
+		kmem_cache_free(ai->aeb_slab_cache, tmp_aeb);
+	}
+	list_for_each_entry_safe(tmp_aeb, _tmp_aeb, &eba_orphans, u.list) {
+		list_del(&tmp_aeb->u.list);
+		kmem_cache_free(ai->aeb_slab_cache, tmp_aeb);
+	}
+	list_for_each_entry_safe(tmp_aeb, _tmp_aeb, &free, u.list) {
+		list_del(&tmp_aeb->u.list);
+		kmem_cache_free(ai->aeb_slab_cache, tmp_aeb);
+	}
+
+	return ret;
+}
+
+/**
+ * ubi_scan_fastmap - scan the fastmap.
+ * @ubi: UBI device object
+ * @ai: UBI attach info to be filled
+ * @fm_anchor: The fastmap starts at this PEB
+ *
+ * Returns 0 on success, UBI_NO_FASTMAP if no fastmap was found,
+ * UBI_BAD_FASTMAP if one was found but is not usable.
+ * < 0 indicates an internal error.
+ */
+int ubi_scan_fastmap(struct ubi_device *ubi, struct ubi_attach_info *ai,
+		     int fm_anchor)
+{
+	struct ubi_fm_sb *fmsb, *fmsb2;
+	struct ubi_vid_hdr *vh;
+	struct ubi_ec_hdr *ech;
+	struct ubi_fastmap_layout *fm;
+	int i, used_blocks, pnum, ret = 0;
+	size_t fm_size;
+	__be32 crc, tmp_crc;
+	unsigned long long sqnum = 0;
+
+	mutex_lock(&ubi->fm_mutex);
+	memset(ubi->fm_buf, 0, ubi->fm_size);
+
+	fmsb = kmalloc(sizeof(*fmsb), GFP_KERNEL);
+	if (!fmsb) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	fm = kzalloc(sizeof(*fm), GFP_KERNEL);
+	if (!fm) {
+		ret = -ENOMEM;
+		kfree(fmsb);
+		goto out;
+	}
+
+	ret = ubi_io_read(ubi, fmsb, fm_anchor, ubi->leb_start, sizeof(*fmsb));
+	if (ret && ret != UBI_IO_BITFLIPS)
+		goto free_fm_sb;
+	else if (ret == UBI_IO_BITFLIPS)
+		fm->to_be_tortured[0] = 1;
+
+	if (be32_to_cpu(fmsb->magic) != UBI_FM_SB_MAGIC) {
+		ubi_err("bad super block magic: 0x%x, expected: 0x%x",
+			be32_to_cpu(fmsb->magic), UBI_FM_SB_MAGIC);
+		ret = UBI_BAD_FASTMAP;
+		goto free_fm_sb;
+	}
+
+	if (fmsb->version != UBI_FM_FMT_VERSION) {
+		ubi_err("bad fastmap version: %i, expected: %i",
+			fmsb->version, UBI_FM_FMT_VERSION);
+		ret = UBI_BAD_FASTMAP;
+		goto free_fm_sb;
+	}
+
+	used_blocks = be32_to_cpu(fmsb->used_blocks);
+	if (used_blocks > UBI_FM_MAX_BLOCKS || used_blocks < 1) {
+		ubi_err("number of fastmap blocks is invalid: %i", used_blocks);
+		ret = UBI_BAD_FASTMAP;
+		goto free_fm_sb;
+	}
+
+	fm_size = ubi->leb_size * used_blocks;
+	if (fm_size != ubi->fm_size) {
+		ubi_err("bad fastmap size: %zi, expected: %zi", fm_size,
+			ubi->fm_size);
+		ret = UBI_BAD_FASTMAP;
+		goto free_fm_sb;
+	}
+
+	ech = kzalloc(ubi->ec_hdr_alsize, GFP_KERNEL);
+	if (!ech) {
+		ret = -ENOMEM;
+		goto free_fm_sb;
+	}
+
+	vh = ubi_zalloc_vid_hdr(ubi, GFP_KERNEL);
+	if (!vh) {
+		ret = -ENOMEM;
+		goto free_hdr;
+	}
+
+	for (i = 0; i < used_blocks; i++) {
+		int image_seq;
+
+		pnum = be32_to_cpu(fmsb->block_loc[i]);
+
+		if (ubi_io_is_bad(ubi, pnum)) {
+			ret = UBI_BAD_FASTMAP;
+			goto free_hdr;
+		}
+
+		ret = ubi_io_read_ec_hdr(ubi, pnum, ech, 0);
+		if (ret && ret != UBI_IO_BITFLIPS) {
+			ubi_err("unable to read fastmap block# %i EC (PEB: %i)",
+				i, pnum);
+			if (ret > 0)
+				ret = UBI_BAD_FASTMAP;
+			goto free_hdr;
+		} else if (ret == UBI_IO_BITFLIPS)
+			fm->to_be_tortured[i] = 1;
+
+		image_seq = be32_to_cpu(ech->image_seq);
+		if (!ubi->image_seq)
+			ubi->image_seq = image_seq;
+
+		/*
+		 * Older UBI implementations have image_seq set to zero, so
+		 * we shouldn't fail if image_seq == 0.
+		 */
+		if (image_seq && (image_seq != ubi->image_seq)) {
+			ubi_err("wrong image seq:%d instead of %d",
+				be32_to_cpu(ech->image_seq), ubi->image_seq);
+			ret = UBI_BAD_FASTMAP;
+			goto free_hdr;
+		}
+
+		ret = ubi_io_read_vid_hdr(ubi, pnum, vh, 0);
+		if (ret && ret != UBI_IO_BITFLIPS) {
+			ubi_err("unable to read fastmap block# %i (PEB: %i)",
+				i, pnum);
+			goto free_hdr;
+		}
+
+		if (i == 0) {
+			if (be32_to_cpu(vh->vol_id) != UBI_FM_SB_VOLUME_ID) {
+				ubi_err("bad fastmap anchor vol_id: 0x%x," \
+					" expected: 0x%x",
+					be32_to_cpu(vh->vol_id),
+					UBI_FM_SB_VOLUME_ID);
+				ret = UBI_BAD_FASTMAP;
+				goto free_hdr;
+			}
+		} else {
+			if (be32_to_cpu(vh->vol_id) != UBI_FM_DATA_VOLUME_ID) {
+				ubi_err("bad fastmap data vol_id: 0x%x," \
+					" expected: 0x%x",
+					be32_to_cpu(vh->vol_id),
+					UBI_FM_DATA_VOLUME_ID);
+				ret = UBI_BAD_FASTMAP;
+				goto free_hdr;
+			}
+		}
+
+		if (sqnum < be64_to_cpu(vh->sqnum))
+			sqnum = be64_to_cpu(vh->sqnum);
+
+		ret = ubi_io_read(ubi, ubi->fm_buf + (ubi->leb_size * i), pnum,
+				  ubi->leb_start, ubi->leb_size);
+		if (ret && ret != UBI_IO_BITFLIPS) {
+			ubi_err("unable to read fastmap block# %i (PEB: %i, " \
+				"err: %i)", i, pnum, ret);
+			goto free_hdr;
+		}
+	}
+
+	kfree(fmsb);
+	fmsb = NULL;
+
+	fmsb2 = (struct ubi_fm_sb *)(ubi->fm_buf);
+	tmp_crc = be32_to_cpu(fmsb2->data_crc);
+	fmsb2->data_crc = 0;
+	crc = crc32(UBI_CRC32_INIT, ubi->fm_buf, fm_size);
+	if (crc != tmp_crc) {
+		ubi_err("fastmap data CRC is invalid");
+		ubi_err("CRC should be: 0x%x, calc: 0x%x", tmp_crc, crc);
+		ret = UBI_BAD_FASTMAP;
+		goto free_hdr;
+	}
+
+	fmsb2->sqnum = sqnum;
+
+	fm->used_blocks = used_blocks;
+
+	ret = ubi_attach_fastmap(ubi, ai, fm);
+	if (ret) {
+		if (ret > 0)
+			ret = UBI_BAD_FASTMAP;
+		goto free_hdr;
+	}
+
+	for (i = 0; i < used_blocks; i++) {
+		struct ubi_wl_entry *e;
+
+		e = kmem_cache_alloc(ubi_wl_entry_slab, GFP_KERNEL);
+		if (!e) {
+			while (i--)
+				kfree(fm->e[i]);
+
+			ret = -ENOMEM;
+			goto free_hdr;
+		}
+
+		e->pnum = be32_to_cpu(fmsb2->block_loc[i]);
+		e->ec = be32_to_cpu(fmsb2->block_ec[i]);
+		fm->e[i] = e;
+	}
+
+	ubi->fm = fm;
+	ubi->fm_pool.max_size = ubi->fm->max_pool_size;
+	ubi->fm_wl_pool.max_size = ubi->fm->max_wl_pool_size;
+	ubi_msg("attached by fastmap");
+	ubi_msg("fastmap pool size: %d", ubi->fm_pool.max_size);
+	ubi_msg("fastmap WL pool size: %d", ubi->fm_wl_pool.max_size);
+	ubi->fm_disabled = 0;
+
+	ubi_free_vid_hdr(ubi, vh);
+	kfree(ech);
+out:
+	mutex_unlock(&ubi->fm_mutex);
+	if (ret == UBI_BAD_FASTMAP)
+		ubi_err("Attach by fastmap failed, doing a full scan!");
+	return ret;
+
+free_hdr:
+	ubi_free_vid_hdr(ubi, vh);
+	kfree(ech);
+free_fm_sb:
+	kfree(fmsb);
+	kfree(fm);
+	goto out;
+}
+
+/**
+ * ubi_write_fastmap - writes a fastmap.
+ * @ubi: UBI device object
+ * @new_fm: the to be written fastmap
+ *
+ * Returns 0 on success, < 0 indicates an internal error.
+ */
+static int ubi_write_fastmap(struct ubi_device *ubi,
+			     struct ubi_fastmap_layout *new_fm)
+{
+	size_t fm_pos = 0;
+	void *fm_raw;
+	struct ubi_fm_sb *fmsb;
+	struct ubi_fm_hdr *fmh;
+	struct ubi_fm_scan_pool *fmpl1, *fmpl2;
+	struct ubi_fm_ec *fec;
+	struct ubi_fm_volhdr *fvh;
+	struct ubi_fm_eba *feba;
+	struct rb_node *node;
+	struct ubi_wl_entry *wl_e;
+	struct ubi_volume *vol;
+	struct ubi_vid_hdr *avhdr, *dvhdr;
+	struct ubi_work *ubi_wrk;
+	int ret, i, j, free_peb_count, used_peb_count, vol_count;
+	int scrub_peb_count, erase_peb_count;
+
+	fm_raw = ubi->fm_buf;
+	memset(ubi->fm_buf, 0, ubi->fm_size);
+
+	avhdr = new_fm_vhdr(ubi, UBI_FM_SB_VOLUME_ID);
+	if (!avhdr) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	dvhdr = new_fm_vhdr(ubi, UBI_FM_DATA_VOLUME_ID);
+	if (!dvhdr) {
+		ret = -ENOMEM;
+		goto out_kfree;
+	}
+
+	spin_lock(&ubi->volumes_lock);
+	spin_lock(&ubi->wl_lock);
+
+	fmsb = (struct ubi_fm_sb *)fm_raw;
+	fm_pos += sizeof(*fmsb);
+	ubi_assert(fm_pos <= ubi->fm_size);
+
+	fmh = (struct ubi_fm_hdr *)(fm_raw + fm_pos);
+	fm_pos += sizeof(*fmh);
+	ubi_assert(fm_pos <= ubi->fm_size);
+
+	fmsb->magic = cpu_to_be32(UBI_FM_SB_MAGIC);
+	fmsb->version = UBI_FM_FMT_VERSION;
+	fmsb->used_blocks = cpu_to_be32(new_fm->used_blocks);
+	/* the max sqnum will be filled in while *reading* the fastmap */
+	fmsb->sqnum = 0;
+
+	fmh->magic = cpu_to_be32(UBI_FM_HDR_MAGIC);
+	free_peb_count = 0;
+	used_peb_count = 0;
+	scrub_peb_count = 0;
+	erase_peb_count = 0;
+	vol_count = 0;
+
+	fmpl1 = (struct ubi_fm_scan_pool *)(fm_raw + fm_pos);
+	fm_pos += sizeof(*fmpl1);
+	fmpl1->magic = cpu_to_be32(UBI_FM_POOL_MAGIC);
+	fmpl1->size = cpu_to_be16(ubi->fm_pool.size);
+	fmpl1->max_size = cpu_to_be16(ubi->fm_pool.max_size);
+
+	for (i = 0; i < ubi->fm_pool.size; i++)
+		fmpl1->pebs[i] = cpu_to_be32(ubi->fm_pool.pebs[i]);
+
+	fmpl2 = (struct ubi_fm_scan_pool *)(fm_raw + fm_pos);
+	fm_pos += sizeof(*fmpl2);
+	fmpl2->magic = cpu_to_be32(UBI_FM_POOL_MAGIC);
+	fmpl2->size = cpu_to_be16(ubi->fm_wl_pool.size);
+	fmpl2->max_size = cpu_to_be16(ubi->fm_wl_pool.max_size);
+
+	for (i = 0; i < ubi->fm_wl_pool.size; i++)
+		fmpl2->pebs[i] = cpu_to_be32(ubi->fm_wl_pool.pebs[i]);
+
+	for (node = rb_first(&ubi->free); node; node = rb_next(node)) {
+		wl_e = rb_entry(node, struct ubi_wl_entry, u.rb);
+		fec = (struct ubi_fm_ec *)(fm_raw + fm_pos);
+
+		fec->pnum = cpu_to_be32(wl_e->pnum);
+		fec->ec = cpu_to_be32(wl_e->ec);
+
+		free_peb_count++;
+		fm_pos += sizeof(*fec);
+		ubi_assert(fm_pos <= ubi->fm_size);
+	}
+	fmh->free_peb_count = cpu_to_be32(free_peb_count);
+
+	for (node = rb_first(&ubi->used); node; node = rb_next(node)) {
+		wl_e = rb_entry(node, struct ubi_wl_entry, u.rb);
+		fec = (struct ubi_fm_ec *)(fm_raw + fm_pos);
+
+		fec->pnum = cpu_to_be32(wl_e->pnum);
+		fec->ec = cpu_to_be32(wl_e->ec);
+
+		used_peb_count++;
+		fm_pos += sizeof(*fec);
+		ubi_assert(fm_pos <= ubi->fm_size);
+	}
+	fmh->used_peb_count = cpu_to_be32(used_peb_count);
+
+	for (node = rb_first(&ubi->scrub); node; node = rb_next(node)) {
+		wl_e = rb_entry(node, struct ubi_wl_entry, u.rb);
+		fec = (struct ubi_fm_ec *)(fm_raw + fm_pos);
+
+		fec->pnum = cpu_to_be32(wl_e->pnum);
+		fec->ec = cpu_to_be32(wl_e->ec);
+
+		scrub_peb_count++;
+		fm_pos += sizeof(*fec);
+		ubi_assert(fm_pos <= ubi->fm_size);
+	}
+	fmh->scrub_peb_count = cpu_to_be32(scrub_peb_count);
+
+
+	list_for_each_entry(ubi_wrk, &ubi->works, list) {
+		if (ubi_is_erase_work(ubi_wrk)) {
+			wl_e = ubi_wrk->e;
+			ubi_assert(wl_e);
+
+			fec = (struct ubi_fm_ec *)(fm_raw + fm_pos);
+
+			fec->pnum = cpu_to_be32(wl_e->pnum);
+			fec->ec = cpu_to_be32(wl_e->ec);
+
+			erase_peb_count++;
+			fm_pos += sizeof(*fec);
+			ubi_assert(fm_pos <= ubi->fm_size);
+		}
+	}
+	fmh->erase_peb_count = cpu_to_be32(erase_peb_count);
+
+	for (i = 0; i < UBI_MAX_VOLUMES + UBI_INT_VOL_COUNT; i++) {
+		vol = ubi->volumes[i];
+
+		if (!vol)
+			continue;
+
+		vol_count++;
+
+		fvh = (struct ubi_fm_volhdr *)(fm_raw + fm_pos);
+		fm_pos += sizeof(*fvh);
+		ubi_assert(fm_pos <= ubi->fm_size);
+
+		fvh->magic = cpu_to_be32(UBI_FM_VHDR_MAGIC);
+		fvh->vol_id = cpu_to_be32(vol->vol_id);
+		fvh->vol_type = vol->vol_type;
+		fvh->used_ebs = cpu_to_be32(vol->used_ebs);
+		fvh->data_pad = cpu_to_be32(vol->data_pad);
+		fvh->last_eb_bytes = cpu_to_be32(vol->last_eb_bytes);
+
+		ubi_assert(vol->vol_type == UBI_DYNAMIC_VOLUME ||
+			vol->vol_type == UBI_STATIC_VOLUME);
+
+		feba = (struct ubi_fm_eba *)(fm_raw + fm_pos);
+		fm_pos += sizeof(*feba) + (sizeof(__be32) * vol->reserved_pebs);
+		ubi_assert(fm_pos <= ubi->fm_size);
+
+		for (j = 0; j < vol->reserved_pebs; j++)
+			feba->pnum[j] = cpu_to_be32(vol->eba_tbl[j]);
+
+		feba->reserved_pebs = cpu_to_be32(j);
+		feba->magic = cpu_to_be32(UBI_FM_EBA_MAGIC);
+	}
+	fmh->vol_count = cpu_to_be32(vol_count);
+	fmh->bad_peb_count = cpu_to_be32(ubi->bad_peb_count);
+
+	avhdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
+	avhdr->lnum = 0;
+
+	spin_unlock(&ubi->wl_lock);
+	spin_unlock(&ubi->volumes_lock);
+
+	dbg_bld("writing fastmap SB to PEB %i", new_fm->e[0]->pnum);
+	ret = ubi_io_write_vid_hdr(ubi, new_fm->e[0]->pnum, avhdr);
+	if (ret) {
+		ubi_err("unable to write vid_hdr to fastmap SB!");
+		goto out_kfree;
+	}
+
+	for (i = 0; i < new_fm->used_blocks; i++) {
+		fmsb->block_loc[i] = cpu_to_be32(new_fm->e[i]->pnum);
+		fmsb->block_ec[i] = cpu_to_be32(new_fm->e[i]->ec);
+	}
+
+	fmsb->data_crc = 0;
+	fmsb->data_crc = cpu_to_be32(crc32(UBI_CRC32_INIT, fm_raw,
+					   ubi->fm_size));
+
+	for (i = 1; i < new_fm->used_blocks; i++) {
+		dvhdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
+		dvhdr->lnum = cpu_to_be32(i);
+		dbg_bld("writing fastmap data to PEB %i sqnum %llu",
+			new_fm->e[i]->pnum, be64_to_cpu(dvhdr->sqnum));
+		ret = ubi_io_write_vid_hdr(ubi, new_fm->e[i]->pnum, dvhdr);
+		if (ret) {
+			ubi_err("unable to write vid_hdr to PEB %i!",
+				new_fm->e[i]->pnum);
+			goto out_kfree;
+		}
+	}
+
+	for (i = 0; i < new_fm->used_blocks; i++) {
+		ret = ubi_io_write(ubi, fm_raw + (i * ubi->leb_size),
+			new_fm->e[i]->pnum, ubi->leb_start, ubi->leb_size);
+		if (ret) {
+			ubi_err("unable to write fastmap to PEB %i!",
+				new_fm->e[i]->pnum);
+			goto out_kfree;
+		}
+	}
+
+	ubi_assert(new_fm);
+	ubi->fm = new_fm;
+
+	dbg_bld("fastmap written!");
+
+out_kfree:
+	ubi_free_vid_hdr(ubi, avhdr);
+	ubi_free_vid_hdr(ubi, dvhdr);
+out:
+	return ret;
+}
+
+/**
+ * erase_block - Manually erase a PEB.
+ * @ubi: UBI device object
+ * @pnum: PEB to be erased
+ *
+ * Returns the new EC value on success, < 0 indicates an internal error.
+ */
+static int erase_block(struct ubi_device *ubi, int pnum)
+{
+	int ret;
+	struct ubi_ec_hdr *ec_hdr;
+	long long ec;
+
+	ec_hdr = kzalloc(ubi->ec_hdr_alsize, GFP_KERNEL);
+	if (!ec_hdr)
+		return -ENOMEM;
+
+	ret = ubi_io_read_ec_hdr(ubi, pnum, ec_hdr, 0);
+	if (ret < 0)
+		goto out;
+	else if (ret && ret != UBI_IO_BITFLIPS) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = ubi_io_sync_erase(ubi, pnum, 0);
+	if (ret < 0)
+		goto out;
+
+	ec = be64_to_cpu(ec_hdr->ec);
+	ec += ret;
+	if (ec > UBI_MAX_ERASECOUNTER) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ec_hdr->ec = cpu_to_be64(ec);
+	ret = ubi_io_write_ec_hdr(ubi, pnum, ec_hdr);
+	if (ret < 0)
+		goto out;
+
+	ret = ec;
+out:
+	kfree(ec_hdr);
+	return ret;
+}
+
+/**
+ * invalidate_fastmap - destroys a fastmap.
+ * @ubi: UBI device object
+ * @fm: the fastmap to be destroyed
+ *
+ * Returns 0 on success, < 0 indicates an internal error.
+ */
+static int invalidate_fastmap(struct ubi_device *ubi,
+			      struct ubi_fastmap_layout *fm)
+{
+	int ret;
+	struct ubi_vid_hdr *vh;
+
+	ret = erase_block(ubi, fm->e[0]->pnum);
+	if (ret < 0)
+		return ret;
+
+	vh = new_fm_vhdr(ubi, UBI_FM_SB_VOLUME_ID);
+	if (!vh)
+		return -ENOMEM;
+
+	/* deleting the current fastmap SB is not enough, an old SB may exist,
+	 * so create a (corrupted) SB such that fastmap will find it and fall
+	 * back to scanning mode in any case */
+	vh->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
+	ret = ubi_io_write_vid_hdr(ubi, fm->e[0]->pnum, vh);
+
+	return ret;
+}
+
+/**
+ * ubi_update_fastmap - will be called by UBI if a volume changes or
+ * a fastmap pool becomes full.
+ * @ubi: UBI device object
+ *
+ * Returns 0 on success, < 0 indicates an internal error.
+ */
+int ubi_update_fastmap(struct ubi_device *ubi)
+{
+	int ret, i;
+	struct ubi_fastmap_layout *new_fm, *old_fm;
+	struct ubi_wl_entry *tmp_e;
+
+	mutex_lock(&ubi->fm_mutex);
+
+	ubi_refill_pools(ubi);
+
+	if (ubi->ro_mode || ubi->fm_disabled) {
+		mutex_unlock(&ubi->fm_mutex);
+		return 0;
+	}
+
+	ret = ubi_ensure_anchor_pebs(ubi);
+	if (ret) {
+		mutex_unlock(&ubi->fm_mutex);
+		return ret;
+	}
+
+	new_fm = kzalloc(sizeof(*new_fm), GFP_KERNEL);
+	if (!new_fm) {
+		mutex_unlock(&ubi->fm_mutex);
+		return -ENOMEM;
+	}
+
+	new_fm->used_blocks = ubi->fm_size / ubi->leb_size;
+
+	for (i = 0; i < new_fm->used_blocks; i++) {
+		new_fm->e[i] = kmem_cache_alloc(ubi_wl_entry_slab, GFP_KERNEL);
+		if (!new_fm->e[i]) {
+			while (i--)
+				kfree(new_fm->e[i]);
+
+			kfree(new_fm);
+			mutex_unlock(&ubi->fm_mutex);
+			return -ENOMEM;
+		}
+	}
+
+	old_fm = ubi->fm;
+	ubi->fm = NULL;
+
+	if (new_fm->used_blocks > UBI_FM_MAX_BLOCKS) {
+		ubi_err("fastmap too large");
+		ret = -ENOSPC;
+		goto err;
+	}
+
+	for (i = 1; i < new_fm->used_blocks; i++) {
+		spin_lock(&ubi->wl_lock);
+		tmp_e = ubi_wl_get_fm_peb(ubi, 0);
+		spin_unlock(&ubi->wl_lock);
+
+		if (!tmp_e && !old_fm) {
+			int j;
+			ubi_err("could not get any free erase block");
+
+			for (j = 1; j < i; j++)
+				ubi_wl_put_fm_peb(ubi, new_fm->e[j], j, 0);
+
+			ret = -ENOSPC;
+			goto err;
+		} else if (!tmp_e && old_fm) {
+			ret = erase_block(ubi, old_fm->e[i]->pnum);
+			if (ret < 0) {
+				int j;
+
+				for (j = 1; j < i; j++)
+					ubi_wl_put_fm_peb(ubi, new_fm->e[j],
+							  j, 0);
+
+				ubi_err("could not erase old fastmap PEB");
+				goto err;
+			}
+
+			new_fm->e[i]->pnum = old_fm->e[i]->pnum;
+			new_fm->e[i]->ec = old_fm->e[i]->ec;
+		} else {
+			new_fm->e[i]->pnum = tmp_e->pnum;
+			new_fm->e[i]->ec = tmp_e->ec;
+
+			if (old_fm)
+				ubi_wl_put_fm_peb(ubi, old_fm->e[i], i,
+						  old_fm->to_be_tortured[i]);
+		}
+	}
+
+	spin_lock(&ubi->wl_lock);
+	tmp_e = ubi_wl_get_fm_peb(ubi, 1);
+	spin_unlock(&ubi->wl_lock);
+
+	if (old_fm) {
+		/* no fresh anchor PEB was found, reuse the old one */
+		if (!tmp_e) {
+			ret = erase_block(ubi, old_fm->e[0]->pnum);
+			if (ret < 0) {
+				int i;
+				ubi_err("could not erase old anchor PEB");
+
+				for (i = 1; i < new_fm->used_blocks; i++)
+					ubi_wl_put_fm_peb(ubi, new_fm->e[i],
+							  i, 0);
+				goto err;
+			}
+
+			new_fm->e[0]->pnum = old_fm->e[0]->pnum;
+			new_fm->e[0]->ec = ret;
+		} else {
+			/* we've got a new anchor PEB, return the old one */
+			ubi_wl_put_fm_peb(ubi, old_fm->e[0], 0,
+					  old_fm->to_be_tortured[0]);
+
+			new_fm->e[0]->pnum = tmp_e->pnum;
+			new_fm->e[0]->ec = tmp_e->ec;
+		}
+	} else {
+		if (!tmp_e) {
+			int i;
+			ubi_err("could not find any anchor PEB");
+
+			for (i = 1; i < new_fm->used_blocks; i++)
+				ubi_wl_put_fm_peb(ubi, new_fm->e[i], i, 0);
+
+			ret = -ENOSPC;
+			goto err;
+		}
+
+		new_fm->e[0]->pnum = tmp_e->pnum;
+		new_fm->e[0]->ec = tmp_e->ec;
+	}
+
+	down_write(&ubi->work_sem);
+	down_write(&ubi->fm_sem);
+	ret = ubi_write_fastmap(ubi, new_fm);
+	up_write(&ubi->fm_sem);
+	up_write(&ubi->work_sem);
+
+	if (ret)
+		goto err;
+
+out_unlock:
+	mutex_unlock(&ubi->fm_mutex);
+	kfree(old_fm);
+	return ret;
+
+err:
+	kfree(new_fm);
+
+	ubi_warn("Unable to write new fastmap, err=%i", ret);
+
+	ret = 0;
+	if (old_fm) {
+		ret = invalidate_fastmap(ubi, old_fm);
+		if (ret < 0)
+			ubi_err("Unable to invalidiate current fastmap!");
+		else if (ret)
+			ret = 0;
+	}
+	goto out_unlock;
+}
diff --git a/drivers/mtd/ubi/gluebi.c b/drivers/mtd/ubi/gluebi.c
index 9aa81584c8a..b93807b4c45 100644
--- a/drivers/mtd/ubi/gluebi.c
+++ b/drivers/mtd/ubi/gluebi.c
@@ -41,7 +41,7 @@
 #include "ubi-media.h"
 
 #define err_msg(fmt, ...)                                   \
-	printk(KERN_DEBUG "gluebi (pid %d): %s: " fmt "\n", \
+	pr_err("gluebi (pid %d): %s: " fmt "\n",            \
 	       current->pid, __func__, ##__VA_ARGS__)
 
 /**
@@ -171,21 +171,17 @@ static void gluebi_put_device(struct mtd_info *mtd)
 static int gluebi_read(struct mtd_info *mtd, loff_t from, size_t len,
 		       size_t *retlen, unsigned char *buf)
 {
-	int err = 0, lnum, offs, total_read;
+	int err = 0, lnum, offs, bytes_left;
 	struct gluebi_device *gluebi;
 
-	if (len < 0 || from < 0 || from + len > mtd->size)
-		return -EINVAL;
-
 	gluebi = container_of(mtd, struct gluebi_device, mtd);
-
 	lnum = div_u64_rem(from, mtd->erasesize, &offs);
-	total_read = len;
-	while (total_read) {
+	bytes_left = len;
+	while (bytes_left) {
 		size_t to_read = mtd->erasesize - offs;
 
-		if (to_read > total_read)
-			to_read = total_read;
+		if (to_read > bytes_left)
+			to_read = bytes_left;
 
 		err = ubi_read(gluebi->desc, lnum, buf, offs, to_read);
 		if (err)
@@ -193,11 +189,11 @@ static int gluebi_read(struct mtd_info *mtd, loff_t from, size_t len,
 
 		lnum += 1;
 		offs = 0;
-		total_read -= to_read;
+		bytes_left -= to_read;
 		buf += to_read;
 	}
 
-	*retlen = len - total_read;
+	*retlen = len - bytes_left;
 	return err;
 }
 
@@ -215,40 +211,33 @@ static int gluebi_read(struct mtd_info *mtd, loff_t from, size_t len,
 static int gluebi_write(struct mtd_info *mtd, loff_t to, size_t len,
 			size_t *retlen, const u_char *buf)
 {
-	int err = 0, lnum, offs, total_written;
+	int err = 0, lnum, offs, bytes_left;
 	struct gluebi_device *gluebi;
 
-	if (len < 0 || to < 0 || len + to > mtd->size)
-		return -EINVAL;
-
 	gluebi = container_of(mtd, struct gluebi_device, mtd);
-
-	if (!(mtd->flags & MTD_WRITEABLE))
-		return -EROFS;
-
 	lnum = div_u64_rem(to, mtd->erasesize, &offs);
 
 	if (len % mtd->writesize || offs % mtd->writesize)
 		return -EINVAL;
 
-	total_written = len;
-	while (total_written) {
+	bytes_left = len;
+	while (bytes_left) {
 		size_t to_write = mtd->erasesize - offs;
 
-		if (to_write > total_written)
-			to_write = total_written;
+		if (to_write > bytes_left)
+			to_write = bytes_left;
 
-		err = ubi_write(gluebi->desc, lnum, buf, offs, to_write);
+		err = ubi_leb_write(gluebi->desc, lnum, buf, offs, to_write);
 		if (err)
 			break;
 
 		lnum += 1;
 		offs = 0;
-		total_written -= to_write;
+		bytes_left -= to_write;
 		buf += to_write;
 	}
 
-	*retlen = len - total_written;
+	*retlen = len - bytes_left;
 	return err;
 }
 
@@ -265,21 +254,13 @@ static int gluebi_erase(struct mtd_info *mtd, struct erase_info *instr)
 	int err, i, lnum, count;
 	struct gluebi_device *gluebi;
 
-	if (instr->addr < 0 || instr->addr > mtd->size - mtd->erasesize)
-		return -EINVAL;
-	if (instr->len < 0 || instr->addr + instr->len > mtd->size)
-		return -EINVAL;
 	if (mtd_mod_by_ws(instr->addr, mtd) || mtd_mod_by_ws(instr->len, mtd))
 		return -EINVAL;
 
 	lnum = mtd_div_by_eb(instr->addr, mtd);
 	count = mtd_div_by_eb(instr->len, mtd);
-
 	gluebi = container_of(mtd, struct gluebi_device, mtd);
 
-	if (!(mtd->flags & MTD_WRITEABLE))
-		return -EROFS;
-
 	for (i = 0; i < count - 1; i++) {
 		err = ubi_leb_unmap(gluebi->desc, lnum + i);
 		if (err)
@@ -340,11 +321,11 @@ static int gluebi_create(struct ubi_device_info *di,
 	mtd->owner      = THIS_MODULE;
 	mtd->writesize  = di->min_io_size;
 	mtd->erasesize  = vi->usable_leb_size;
-	mtd->read       = gluebi_read;
-	mtd->write      = gluebi_write;
-	mtd->erase      = gluebi_erase;
-	mtd->get_device = gluebi_get_device;
-	mtd->put_device = gluebi_put_device;
+	mtd->_read       = gluebi_read;
+	mtd->_write      = gluebi_write;
+	mtd->_erase      = gluebi_erase;
+	mtd->_get_device = gluebi_get_device;
+	mtd->_put_device = gluebi_put_device;
 
 	/*
 	 * In case of dynamic a volume, MTD device size is just volume size. In
@@ -360,12 +341,11 @@ static int gluebi_create(struct ubi_device_info *di,
 	mutex_lock(&devices_mutex);
 	g = find_gluebi_nolock(vi->ubi_num, vi->vol_id);
 	if (g)
-		err_msg("gluebi MTD device %d form UBI device %d volume %d "
-			"already exists", g->mtd.index, vi->ubi_num,
-			vi->vol_id);
+		err_msg("gluebi MTD device %d form UBI device %d volume %d already exists",
+			g->mtd.index, vi->ubi_num, vi->vol_id);
 	mutex_unlock(&devices_mutex);
 
-	if (add_mtd_device(mtd)) {
+	if (mtd_device_register(mtd, NULL, 0)) {
 		err_msg("cannot add MTD device");
 		kfree(mtd->name);
 		kfree(gluebi);
@@ -395,8 +375,8 @@ static int gluebi_remove(struct ubi_volume_info *vi)
 	mutex_lock(&devices_mutex);
 	gluebi = find_gluebi_nolock(vi->ubi_num, vi->vol_id);
 	if (!gluebi) {
-		err_msg("got remove notification for unknown UBI device %d "
-			"volume %d", vi->ubi_num, vi->vol_id);
+		err_msg("got remove notification for unknown UBI device %d volume %d",
+			vi->ubi_num, vi->vol_id);
 		err = -ENOENT;
 	} else if (gluebi->refcnt)
 		err = -EBUSY;
@@ -407,11 +387,10 @@ static int gluebi_remove(struct ubi_volume_info *vi)
 		return err;
 
 	mtd = &gluebi->mtd;
-	err = del_mtd_device(mtd);
+	err = mtd_device_unregister(mtd);
 	if (err) {
-		err_msg("cannot remove fake MTD device %d, UBI device %d, "
-			"volume %d, error %d", mtd->index, gluebi->ubi_num,
-			gluebi->vol_id, err);
+		err_msg("cannot remove fake MTD device %d, UBI device %d, volume %d, error %d",
+			mtd->index, gluebi->ubi_num, gluebi->vol_id, err);
 		mutex_lock(&devices_mutex);
 		list_add_tail(&gluebi->list, &gluebi_devices);
 		mutex_unlock(&devices_mutex);
@@ -441,8 +420,8 @@ static int gluebi_updated(struct ubi_volume_info *vi)
 	gluebi = find_gluebi_nolock(vi->ubi_num, vi->vol_id);
 	if (!gluebi) {
 		mutex_unlock(&devices_mutex);
-		err_msg("got update notification for unknown UBI device %d "
-			"volume %d", vi->ubi_num, vi->vol_id);
+		err_msg("got update notification for unknown UBI device %d volume %d",
+			vi->ubi_num, vi->vol_id);
 		return -ENOENT;
 	}
 
@@ -468,8 +447,8 @@ static int gluebi_resized(struct ubi_volume_info *vi)
 	gluebi = find_gluebi_nolock(vi->ubi_num, vi->vol_id);
 	if (!gluebi) {
 		mutex_unlock(&devices_mutex);
-		err_msg("got update notification for unknown UBI device %d "
-			"volume %d", vi->ubi_num, vi->vol_id);
+		err_msg("got update notification for unknown UBI device %d volume %d",
+			vi->ubi_num, vi->vol_id);
 		return -ENOENT;
 	}
 	gluebi->mtd.size = vi->used_bytes;
@@ -524,11 +503,11 @@ static void __exit ubi_gluebi_exit(void)
 		int err;
 		struct mtd_info *mtd = &gluebi->mtd;
 
-		err = del_mtd_device(mtd);
+		err = mtd_device_unregister(mtd);
 		if (err)
-			err_msg("error %d while removing gluebi MTD device %d, "
-				"UBI device %d, volume %d - ignoring", err,
-				mtd->index, gluebi->ubi_num, gluebi->vol_id);
+			err_msg("error %d while removing gluebi MTD device %d, UBI device %d, volume %d - ignoring",
+				err, mtd->index, gluebi->ubi_num,
+				gluebi->vol_id);
 		kfree(mtd->name);
 		kfree(gluebi);
 	}
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index 4b979e34b15..d36134925d3 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -91,21 +91,15 @@
 #include <linux/slab.h>
 #include "ubi.h"
 
-#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
-static int paranoid_check_not_bad(const struct ubi_device *ubi, int pnum);
-static int paranoid_check_peb_ec_hdr(const struct ubi_device *ubi, int pnum);
-static int paranoid_check_ec_hdr(const struct ubi_device *ubi, int pnum,
-				 const struct ubi_ec_hdr *ec_hdr);
-static int paranoid_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum);
-static int paranoid_check_vid_hdr(const struct ubi_device *ubi, int pnum,
-				  const struct ubi_vid_hdr *vid_hdr);
-#else
-#define paranoid_check_not_bad(ubi, pnum) 0
-#define paranoid_check_peb_ec_hdr(ubi, pnum)  0
-#define paranoid_check_ec_hdr(ubi, pnum, ec_hdr)  0
-#define paranoid_check_peb_vid_hdr(ubi, pnum) 0
-#define paranoid_check_vid_hdr(ubi, pnum, vid_hdr) 0
-#endif
+static int self_check_not_bad(const struct ubi_device *ubi, int pnum);
+static int self_check_peb_ec_hdr(const struct ubi_device *ubi, int pnum);
+static int self_check_ec_hdr(const struct ubi_device *ubi, int pnum,
+			     const struct ubi_ec_hdr *ec_hdr);
+static int self_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum);
+static int self_check_vid_hdr(const struct ubi_device *ubi, int pnum,
+			      const struct ubi_vid_hdr *vid_hdr);
+static int self_check_write(struct ubi_device *ubi, const void *buf, int pnum,
+			    int offset, int len);
 
 /**
  * ubi_io_read - read data from a physical eraseblock.
@@ -142,15 +136,39 @@ int ubi_io_read(const struct ubi_device *ubi, void *buf, int pnum, int offset,
 	ubi_assert(offset >= 0 && offset + len <= ubi->peb_size);
 	ubi_assert(len > 0);
 
-	err = paranoid_check_not_bad(ubi, pnum);
+	err = self_check_not_bad(ubi, pnum);
 	if (err)
 		return err;
 
+	/*
+	 * Deliberately corrupt the buffer to improve robustness. Indeed, if we
+	 * do not do this, the following may happen:
+	 * 1. The buffer contains data from previous operation, e.g., read from
+	 *    another PEB previously. The data looks like expected, e.g., if we
+	 *    just do not read anything and return - the caller would not
+	 *    notice this. E.g., if we are reading a VID header, the buffer may
+	 *    contain a valid VID header from another PEB.
+	 * 2. The driver is buggy and returns us success or -EBADMSG or
+	 *    -EUCLEAN, but it does not actually put any data to the buffer.
+	 *
+	 * This may confuse UBI or upper layers - they may think the buffer
+	 * contains valid data while in fact it is just old data. This is
+	 * especially possible because UBI (and UBIFS) relies on CRC, and
+	 * treats data as correct even in case of ECC errors if the CRC is
+	 * correct.
+	 *
+	 * Try to prevent this situation by changing the first byte of the
+	 * buffer.
+	 */
+	*((uint8_t *)buf) ^= 0xFF;
+
 	addr = (loff_t)pnum * ubi->peb_size + offset;
 retry:
-	err = ubi->mtd->read(ubi->mtd, addr, len, &read, buf);
+	err = mtd_read(ubi->mtd, addr, len, &read, buf);
 	if (err) {
-		if (err == -EUCLEAN) {
+		const char *errstr = mtd_is_eccerr(err) ? " (ECC error)" : "";
+
+		if (mtd_is_bitflip(err)) {
 			/*
 			 * -EUCLEAN is reported if there was a bit-flip which
 			 * was corrected, so this is harmless.
@@ -159,36 +177,35 @@ retry:
 			 * enabled. A corresponding message will be printed
 			 * later, when it is has been scrubbed.
 			 */
-			dbg_msg("fixable bit-flip detected at PEB %d", pnum);
+			ubi_msg("fixable bit-flip detected at PEB %d", pnum);
 			ubi_assert(len == read);
 			return UBI_IO_BITFLIPS;
 		}
 
-		if (read != len && retries++ < UBI_IO_RETRIES) {
-			dbg_io("error %d while reading %d bytes from PEB %d:%d,"
-			       " read only %zd bytes, retry",
-			       err, len, pnum, offset, read);
+		if (retries++ < UBI_IO_RETRIES) {
+			ubi_warn("error %d%s while reading %d bytes from PEB %d:%d, read only %zd bytes, retry",
+				 err, errstr, len, pnum, offset, read);
 			yield();
 			goto retry;
 		}
 
-		ubi_err("error %d while reading %d bytes from PEB %d:%d, "
-			"read %zd bytes", err, len, pnum, offset, read);
-		ubi_dbg_dump_stack();
+		ubi_err("error %d%s while reading %d bytes from PEB %d:%d, read %zd bytes",
+			err, errstr, len, pnum, offset, read);
+		dump_stack();
 
 		/*
 		 * The driver should never return -EBADMSG if it failed to read
 		 * all the requested data. But some buggy drivers might do
 		 * this, so we change it to -EIO.
 		 */
-		if (read != len && err == -EBADMSG) {
+		if (read != len && mtd_is_eccerr(err)) {
 			ubi_assert(0);
 			err = -EIO;
 		}
 	} else {
 		ubi_assert(len == read);
 
-		if (ubi_dbg_is_bitflip()) {
+		if (ubi_dbg_is_bitflip(ubi)) {
 			dbg_gen("bit-flip (emulated)");
 			err = UBI_IO_BITFLIPS;
 		}
@@ -233,14 +250,12 @@ int ubi_io_write(struct ubi_device *ubi, const void *buf, int pnum, int offset,
 		return -EROFS;
 	}
 
-	/* The below has to be compiled out if paranoid checks are disabled */
-
-	err = paranoid_check_not_bad(ubi, pnum);
+	err = self_check_not_bad(ubi, pnum);
 	if (err)
 		return err;
 
 	/* The area we are writing to has to contain all 0xFF bytes */
-	err = ubi_dbg_check_all_ff(ubi, pnum, offset, len);
+	err = ubi_self_check_all_ff(ubi, pnum, offset, len);
 	if (err)
 		return err;
 
@@ -249,33 +264,33 @@ int ubi_io_write(struct ubi_device *ubi, const void *buf, int pnum, int offset,
 		 * We write to the data area of the physical eraseblock. Make
 		 * sure it has valid EC and VID headers.
 		 */
-		err = paranoid_check_peb_ec_hdr(ubi, pnum);
+		err = self_check_peb_ec_hdr(ubi, pnum);
 		if (err)
 			return err;
-		err = paranoid_check_peb_vid_hdr(ubi, pnum);
+		err = self_check_peb_vid_hdr(ubi, pnum);
 		if (err)
 			return err;
 	}
 
-	if (ubi_dbg_is_write_failure()) {
-		dbg_err("cannot write %d bytes to PEB %d:%d "
-			"(emulated)", len, pnum, offset);
-		ubi_dbg_dump_stack();
+	if (ubi_dbg_is_write_failure(ubi)) {
+		ubi_err("cannot write %d bytes to PEB %d:%d (emulated)",
+			len, pnum, offset);
+		dump_stack();
 		return -EIO;
 	}
 
 	addr = (loff_t)pnum * ubi->peb_size + offset;
-	err = ubi->mtd->write(ubi->mtd, addr, len, &written, buf);
+	err = mtd_write(ubi->mtd, addr, len, &written, buf);
 	if (err) {
-		ubi_err("error %d while writing %d bytes to PEB %d:%d, written "
-			"%zd bytes", err, len, pnum, offset, written);
-		ubi_dbg_dump_stack();
-		ubi_dbg_dump_flash(ubi, pnum, offset, len);
+		ubi_err("error %d while writing %d bytes to PEB %d:%d, written %zd bytes",
+			err, len, pnum, offset, written);
+		dump_stack();
+		ubi_dump_flash(ubi, pnum, offset, len);
 	} else
 		ubi_assert(written == len);
 
 	if (!err) {
-		err = ubi_dbg_check_write(ubi, buf, pnum, offset, len);
+		err = self_check_write(ubi, buf, pnum, offset, len);
 		if (err)
 			return err;
 
@@ -286,7 +301,7 @@ int ubi_io_write(struct ubi_device *ubi, const void *buf, int pnum, int offset,
 		offset += len;
 		len = ubi->peb_size - offset;
 		if (len)
-			err = ubi_dbg_check_all_ff(ubi, pnum, offset, len);
+			err = ubi_self_check_all_ff(ubi, pnum, offset, len);
 	}
 
 	return err;
@@ -320,6 +335,12 @@ static int do_sync_erase(struct ubi_device *ubi, int pnum)
 	wait_queue_head_t wq;
 
 	dbg_io("erase PEB %d", pnum);
+	ubi_assert(pnum >= 0 && pnum < ubi->peb_count);
+
+	if (ubi->ro_mode) {
+		ubi_err("read-only mode");
+		return -EROFS;
+	}
 
 retry:
 	init_waitqueue_head(&wq);
@@ -331,16 +352,16 @@ retry:
 	ei.callback = erase_callback;
 	ei.priv     = (unsigned long)&wq;
 
-	err = ubi->mtd->erase(ubi->mtd, &ei);
+	err = mtd_erase(ubi->mtd, &ei);
 	if (err) {
 		if (retries++ < UBI_IO_RETRIES) {
-			dbg_io("error %d while erasing PEB %d, retry",
-			       err, pnum);
+			ubi_warn("error %d while erasing PEB %d, retry",
+				 err, pnum);
 			yield();
 			goto retry;
 		}
 		ubi_err("cannot erase PEB %d, error %d", pnum, err);
-		ubi_dbg_dump_stack();
+		dump_stack();
 		return err;
 	}
 
@@ -353,46 +374,27 @@ retry:
 
 	if (ei.state == MTD_ERASE_FAILED) {
 		if (retries++ < UBI_IO_RETRIES) {
-			dbg_io("error while erasing PEB %d, retry", pnum);
+			ubi_warn("error while erasing PEB %d, retry", pnum);
 			yield();
 			goto retry;
 		}
 		ubi_err("cannot erase PEB %d", pnum);
-		ubi_dbg_dump_stack();
+		dump_stack();
 		return -EIO;
 	}
 
-	err = ubi_dbg_check_all_ff(ubi, pnum, 0, ubi->peb_size);
+	err = ubi_self_check_all_ff(ubi, pnum, 0, ubi->peb_size);
 	if (err)
 		return err;
 
-	if (ubi_dbg_is_erase_failure() && !err) {
-		dbg_err("cannot erase PEB %d (emulated)", pnum);
+	if (ubi_dbg_is_erase_failure(ubi)) {
+		ubi_err("cannot erase PEB %d (emulated)", pnum);
 		return -EIO;
 	}
 
 	return 0;
 }
 
-/**
- * check_pattern - check if buffer contains only a certain byte pattern.
- * @buf: buffer to check
- * @patt: the pattern to check
- * @size: buffer size in bytes
- *
- * This function returns %1 in there are only @patt bytes in @buf, and %0 if
- * something else was also found.
- */
-static int check_pattern(const void *buf, uint8_t patt, int size)
-{
-	int i;
-
-	for (i = 0; i < size; i++)
-		if (((const uint8_t *)buf)[i] != patt)
-			return 0;
-	return 1;
-}
-
 /* Patterns to write to a physical eraseblock when torturing it */
 static uint8_t patterns[] = {0xa5, 0x5a, 0x0};
 
@@ -420,11 +422,11 @@ static int torture_peb(struct ubi_device *ubi, int pnum)
 			goto out;
 
 		/* Make sure the PEB contains only 0xFF bytes */
-		err = ubi_io_read(ubi, ubi->peb_buf1, pnum, 0, ubi->peb_size);
+		err = ubi_io_read(ubi, ubi->peb_buf, pnum, 0, ubi->peb_size);
 		if (err)
 			goto out;
 
-		err = check_pattern(ubi->peb_buf1, 0xFF, ubi->peb_size);
+		err = ubi_check_pattern(ubi->peb_buf, 0xFF, ubi->peb_size);
 		if (err == 0) {
 			ubi_err("erased PEB %d, but a non-0xFF byte found",
 				pnum);
@@ -433,17 +435,18 @@ static int torture_peb(struct ubi_device *ubi, int pnum)
 		}
 
 		/* Write a pattern and check it */
-		memset(ubi->peb_buf1, patterns[i], ubi->peb_size);
-		err = ubi_io_write(ubi, ubi->peb_buf1, pnum, 0, ubi->peb_size);
+		memset(ubi->peb_buf, patterns[i], ubi->peb_size);
+		err = ubi_io_write(ubi, ubi->peb_buf, pnum, 0, ubi->peb_size);
 		if (err)
 			goto out;
 
-		memset(ubi->peb_buf1, ~patterns[i], ubi->peb_size);
-		err = ubi_io_read(ubi, ubi->peb_buf1, pnum, 0, ubi->peb_size);
+		memset(ubi->peb_buf, ~patterns[i], ubi->peb_size);
+		err = ubi_io_read(ubi, ubi->peb_buf, pnum, 0, ubi->peb_size);
 		if (err)
 			goto out;
 
-		err = check_pattern(ubi->peb_buf1, patterns[i], ubi->peb_size);
+		err = ubi_check_pattern(ubi->peb_buf, patterns[i],
+					ubi->peb_size);
 		if (err == 0) {
 			ubi_err("pattern %x checking failed for PEB %d",
 				patterns[i], pnum);
@@ -453,11 +456,11 @@ static int torture_peb(struct ubi_device *ubi, int pnum)
 	}
 
 	err = patt_count;
-	ubi_msg("PEB %d passed torture test, do not mark it a bad", pnum);
+	ubi_msg("PEB %d passed torture test, do not mark it as bad", pnum);
 
 out:
 	mutex_unlock(&ubi->buf_mutex);
-	if (err == UBI_IO_BITFLIPS || err == -EBADMSG) {
+	if (err == UBI_IO_BITFLIPS || mtd_is_eccerr(err)) {
 		/*
 		 * If a bit-flip or data integrity error was detected, the test
 		 * has not passed because it happened on a freshly erased
@@ -492,45 +495,55 @@ out:
  */
 static int nor_erase_prepare(struct ubi_device *ubi, int pnum)
 {
-	int err, err1;
+	int err;
 	size_t written;
 	loff_t addr;
 	uint32_t data = 0;
-	struct ubi_vid_hdr vid_hdr;
+	struct ubi_ec_hdr ec_hdr;
 
-	addr = (loff_t)pnum * ubi->peb_size + ubi->vid_hdr_aloffset;
-	err = ubi->mtd->write(ubi->mtd, addr, 4, &written, (void *)&data);
-	if (!err) {
-		addr -= ubi->vid_hdr_aloffset;
-		err = ubi->mtd->write(ubi->mtd, addr, 4, &written,
-				      (void *)&data);
-		if (!err)
-			return 0;
-	}
+	/*
+	 * Note, we cannot generally define VID header buffers on stack,
+	 * because of the way we deal with these buffers (see the header
+	 * comment in this file). But we know this is a NOR-specific piece of
+	 * code, so we can do this. But yes, this is error-prone and we should
+	 * (pre-)allocate VID header buffer instead.
+	 */
+	struct ubi_vid_hdr vid_hdr;
 
 	/*
-	 * We failed to write to the media. This was observed with Spansion
-	 * S29GL512N NOR flash. Most probably the eraseblock erasure was
-	 * interrupted at a very inappropriate moment, so it became unwritable.
-	 * In this case we probably anyway have garbage in this PEB.
+	 * If VID or EC is valid, we have to corrupt them before erasing.
+	 * It is important to first invalidate the EC header, and then the VID
+	 * header. Otherwise a power cut may lead to valid EC header and
+	 * invalid VID header, in which case UBI will treat this PEB as
+	 * corrupted and will try to preserve it, and print scary warnings.
 	 */
-	err1 = ubi_io_read_vid_hdr(ubi, pnum, &vid_hdr, 0);
-	if (err1 == UBI_IO_BAD_VID_HDR)
-		/*
-		 * The VID header is corrupted, so we can safely erase this
-		 * PEB and not afraid that it will be treated as a valid PEB in
-		 * case of an unclean reboot.
-		 */
-		return 0;
+	addr = (loff_t)pnum * ubi->peb_size;
+	err = ubi_io_read_ec_hdr(ubi, pnum, &ec_hdr, 0);
+	if (err != UBI_IO_BAD_HDR_EBADMSG && err != UBI_IO_BAD_HDR &&
+	    err != UBI_IO_FF){
+		err = mtd_write(ubi->mtd, addr, 4, &written, (void *)&data);
+		if(err)
+			goto error;
+	}
+
+	err = ubi_io_read_vid_hdr(ubi, pnum, &vid_hdr, 0);
+	if (err != UBI_IO_BAD_HDR_EBADMSG && err != UBI_IO_BAD_HDR &&
+	    err != UBI_IO_FF){
+		addr += ubi->vid_hdr_aloffset;
+		err = mtd_write(ubi->mtd, addr, 4, &written, (void *)&data);
+		if (err)
+			goto error;
+	}
+	return 0;
 
+error:
 	/*
-	 * The PEB contains a valid VID header, but we cannot invalidate it.
-	 * Supposedly the flash media or the driver is screwed up, so return an
-	 * error.
+	 * The PEB contains a valid VID or EC header, but we cannot invalidate
+	 * it. Supposedly the flash media or the driver is screwed up, so
+	 * return an error.
 	 */
-	ubi_err("cannot invalidate PEB %d, write returned %d read returned %d",
-		pnum, err, err1);
-	ubi_dbg_dump_flash(ubi, pnum, 0, ubi->peb_size);
+	ubi_err("cannot invalidate PEB %d, write returned %d", pnum, err);
+	ubi_dump_flash(ubi, pnum, 0, ubi->peb_size);
 	return -EIO;
 }
 
@@ -556,7 +569,7 @@ int ubi_io_sync_erase(struct ubi_device *ubi, int pnum, int torture)
 
 	ubi_assert(pnum >= 0 && pnum < ubi->peb_count);
 
-	err = paranoid_check_not_bad(ubi, pnum);
+	err = self_check_not_bad(ubi, pnum);
 	if (err != 0)
 		return err;
 
@@ -601,7 +614,7 @@ int ubi_io_is_bad(const struct ubi_device *ubi, int pnum)
 	if (ubi->bad_allowed) {
 		int ret;
 
-		ret = mtd->block_isbad(mtd, (loff_t)pnum * ubi->peb_size);
+		ret = mtd_block_isbad(mtd, (loff_t)pnum * ubi->peb_size);
 		if (ret < 0)
 			ubi_err("error %d while checking if PEB %d is bad",
 				ret, pnum);
@@ -636,7 +649,7 @@ int ubi_io_mark_bad(const struct ubi_device *ubi, int pnum)
 	if (!ubi->bad_allowed)
 		return 0;
 
-	err = mtd->block_markbad(mtd, (loff_t)pnum * ubi->peb_size);
+	err = mtd_block_markbad(mtd, (loff_t)pnum * ubi->peb_size);
 	if (err)
 		ubi_err("cannot mark PEB %d bad, error %d", pnum, err);
 	return err;
@@ -661,8 +674,7 @@ static int validate_ec_hdr(const struct ubi_device *ubi,
 	leb_start = be32_to_cpu(ec_hdr->data_offset);
 
 	if (ec_hdr->version != UBI_VERSION) {
-		ubi_err("node with incompatible UBI version found: "
-			"this UBI version is %d, image version is %d",
+		ubi_err("node with incompatible UBI version found: this UBI version is %d, image version is %d",
 			UBI_VERSION, (int)ec_hdr->version);
 		goto bad;
 	}
@@ -688,8 +700,8 @@ static int validate_ec_hdr(const struct ubi_device *ubi,
 
 bad:
 	ubi_err("bad EC header");
-	ubi_dbg_dump_ec_hdr(ec_hdr);
-	ubi_dbg_dump_stack();
+	ubi_dump_ec_hdr(ec_hdr);
+	dump_stack();
 	return 1;
 }
 
@@ -709,58 +721,58 @@ bad:
  * o %UBI_IO_BITFLIPS if the CRC is correct, but bit-flips were detected
  *   and corrected by the flash driver; this is harmless but may indicate that
  *   this eraseblock may become bad soon (but may be not);
- * o %UBI_IO_BAD_EC_HDR if the erase counter header is corrupted (a CRC error);
- * o %UBI_IO_PEB_EMPTY if the physical eraseblock is empty;
+ * o %UBI_IO_BAD_HDR if the erase counter header is corrupted (a CRC error);
+ * o %UBI_IO_BAD_HDR_EBADMSG is the same as %UBI_IO_BAD_HDR, but there also was
+ *   a data integrity error (uncorrectable ECC error in case of NAND);
+ * o %UBI_IO_FF if only 0xFF bytes were read (the PEB is supposedly empty)
  * o a negative error code in case of failure.
  */
 int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
 		       struct ubi_ec_hdr *ec_hdr, int verbose)
 {
-	int err, read_err = 0;
+	int err, read_err;
 	uint32_t crc, magic, hdr_crc;
 
 	dbg_io("read EC header from PEB %d", pnum);
 	ubi_assert(pnum >= 0 && pnum < ubi->peb_count);
 
-	err = ubi_io_read(ubi, ec_hdr, pnum, 0, UBI_EC_HDR_SIZE);
-	if (err) {
-		if (err != UBI_IO_BITFLIPS && err != -EBADMSG)
-			return err;
+	read_err = ubi_io_read(ubi, ec_hdr, pnum, 0, UBI_EC_HDR_SIZE);
+	if (read_err) {
+		if (read_err != UBI_IO_BITFLIPS && !mtd_is_eccerr(read_err))
+			return read_err;
 
 		/*
 		 * We read all the data, but either a correctable bit-flip
-		 * occurred, or MTD reported about some data integrity error,
-		 * like an ECC error in case of NAND. The former is harmless,
-		 * the later may mean that the read data is corrupted. But we
-		 * have a CRC check-sum and we will detect this. If the EC
-		 * header is still OK, we just report this as there was a
-		 * bit-flip.
+		 * occurred, or MTD reported a data integrity error
+		 * (uncorrectable ECC error in case of NAND). The former is
+		 * harmless, the later may mean that the read data is
+		 * corrupted. But we have a CRC check-sum and we will detect
+		 * this. If the EC header is still OK, we just report this as
+		 * there was a bit-flip, to force scrubbing.
 		 */
-		read_err = err;
 	}
 
 	magic = be32_to_cpu(ec_hdr->magic);
 	if (magic != UBI_EC_HDR_MAGIC) {
+		if (mtd_is_eccerr(read_err))
+			return UBI_IO_BAD_HDR_EBADMSG;
+
 		/*
 		 * The magic field is wrong. Let's check if we have read all
 		 * 0xFF. If yes, this physical eraseblock is assumed to be
 		 * empty.
-		 *
-		 * But if there was a read error, we do not test it for all
-		 * 0xFFs. Even if it does contain all 0xFFs, this error
-		 * indicates that something is still wrong with this physical
-		 * eraseblock and we anyway cannot treat it as empty.
 		 */
-		if (read_err != -EBADMSG &&
-		    check_pattern(ec_hdr, 0xFF, UBI_EC_HDR_SIZE)) {
+		if (ubi_check_pattern(ec_hdr, 0xFF, UBI_EC_HDR_SIZE)) {
 			/* The physical eraseblock is supposedly empty */
 			if (verbose)
-				ubi_warn("no EC header found at PEB %d, "
-					 "only 0xFF bytes", pnum);
-			else if (UBI_IO_DEBUG)
-				dbg_msg("no EC header found at PEB %d, "
-					"only 0xFF bytes", pnum);
-			return UBI_IO_PEB_EMPTY;
+				ubi_warn("no EC header found at PEB %d, only 0xFF bytes",
+					 pnum);
+			dbg_bld("no EC header found at PEB %d, only 0xFF bytes",
+				pnum);
+			if (!read_err)
+				return UBI_IO_FF;
+			else
+				return UBI_IO_FF_BITFLIPS;
 		}
 
 		/*
@@ -768,13 +780,13 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
 		 * 0xFF bytes. Report that the header is corrupted.
 		 */
 		if (verbose) {
-			ubi_warn("bad magic number at PEB %d: %08x instead of "
-				 "%08x", pnum, magic, UBI_EC_HDR_MAGIC);
-			ubi_dbg_dump_ec_hdr(ec_hdr);
-		} else if (UBI_IO_DEBUG)
-			dbg_msg("bad magic number at PEB %d: %08x instead of "
-				"%08x", pnum, magic, UBI_EC_HDR_MAGIC);
-		return UBI_IO_BAD_EC_HDR;
+			ubi_warn("bad magic number at PEB %d: %08x instead of %08x",
+				 pnum, magic, UBI_EC_HDR_MAGIC);
+			ubi_dump_ec_hdr(ec_hdr);
+		}
+		dbg_bld("bad magic number at PEB %d: %08x instead of %08x",
+			pnum, magic, UBI_EC_HDR_MAGIC);
+		return UBI_IO_BAD_HDR;
 	}
 
 	crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC);
@@ -782,13 +794,17 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
 
 	if (hdr_crc != crc) {
 		if (verbose) {
-			ubi_warn("bad EC header CRC at PEB %d, calculated "
-				 "%#08x, read %#08x", pnum, crc, hdr_crc);
-			ubi_dbg_dump_ec_hdr(ec_hdr);
-		} else if (UBI_IO_DEBUG)
-			dbg_msg("bad EC header CRC at PEB %d, calculated "
-				"%#08x, read %#08x", pnum, crc, hdr_crc);
-		return UBI_IO_BAD_EC_HDR;
+			ubi_warn("bad EC header CRC at PEB %d, calculated %#08x, read %#08x",
+				 pnum, crc, hdr_crc);
+			ubi_dump_ec_hdr(ec_hdr);
+		}
+		dbg_bld("bad EC header CRC at PEB %d, calculated %#08x, read %#08x",
+			pnum, crc, hdr_crc);
+
+		if (!read_err)
+			return UBI_IO_BAD_HDR;
+		else
+			return UBI_IO_BAD_HDR_EBADMSG;
 	}
 
 	/* And of course validate what has just been read from the media */
@@ -798,6 +814,10 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
 		return -EINVAL;
 	}
 
+	/*
+	 * If there was %-EBADMSG, but the header CRC is still OK, report about
+	 * a bit-flip to force scrubbing on this PEB.
+	 */
 	return read_err ? UBI_IO_BITFLIPS : 0;
 }
 
@@ -833,7 +853,7 @@ int ubi_io_write_ec_hdr(struct ubi_device *ubi, int pnum,
 	crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC);
 	ec_hdr->hdr_crc = cpu_to_be32(crc);
 
-	err = paranoid_check_ec_hdr(ubi, pnum, ec_hdr);
+	err = self_check_ec_hdr(ubi, pnum, ec_hdr);
 	if (err)
 		return err;
 
@@ -864,40 +884,40 @@ static int validate_vid_hdr(const struct ubi_device *ubi,
 	int usable_leb_size = ubi->leb_size - data_pad;
 
 	if (copy_flag != 0 && copy_flag != 1) {
-		dbg_err("bad copy_flag");
+		ubi_err("bad copy_flag");
 		goto bad;
 	}
 
 	if (vol_id < 0 || lnum < 0 || data_size < 0 || used_ebs < 0 ||
 	    data_pad < 0) {
-		dbg_err("negative values");
+		ubi_err("negative values");
 		goto bad;
 	}
 
 	if (vol_id >= UBI_MAX_VOLUMES && vol_id < UBI_INTERNAL_VOL_START) {
-		dbg_err("bad vol_id");
+		ubi_err("bad vol_id");
 		goto bad;
 	}
 
 	if (vol_id < UBI_INTERNAL_VOL_START && compat != 0) {
-		dbg_err("bad compat");
+		ubi_err("bad compat");
 		goto bad;
 	}
 
 	if (vol_id >= UBI_INTERNAL_VOL_START && compat != UBI_COMPAT_DELETE &&
 	    compat != UBI_COMPAT_RO && compat != UBI_COMPAT_PRESERVE &&
 	    compat != UBI_COMPAT_REJECT) {
-		dbg_err("bad compat");
+		ubi_err("bad compat");
 		goto bad;
 	}
 
 	if (vol_type != UBI_VID_DYNAMIC && vol_type != UBI_VID_STATIC) {
-		dbg_err("bad vol_type");
+		ubi_err("bad vol_type");
 		goto bad;
 	}
 
 	if (data_pad >= ubi->leb_size / 2) {
-		dbg_err("bad data_pad");
+		ubi_err("bad data_pad");
 		goto bad;
 	}
 
@@ -909,45 +929,45 @@ static int validate_vid_hdr(const struct ubi_device *ubi,
 		 * mapped logical eraseblocks.
 		 */
 		if (used_ebs == 0) {
-			dbg_err("zero used_ebs");
+			ubi_err("zero used_ebs");
 			goto bad;
 		}
 		if (data_size == 0) {
-			dbg_err("zero data_size");
+			ubi_err("zero data_size");
 			goto bad;
 		}
 		if (lnum < used_ebs - 1) {
 			if (data_size != usable_leb_size) {
-				dbg_err("bad data_size");
+				ubi_err("bad data_size");
 				goto bad;
 			}
 		} else if (lnum == used_ebs - 1) {
 			if (data_size == 0) {
-				dbg_err("bad data_size at last LEB");
+				ubi_err("bad data_size at last LEB");
 				goto bad;
 			}
 		} else {
-			dbg_err("too high lnum");
+			ubi_err("too high lnum");
 			goto bad;
 		}
 	} else {
 		if (copy_flag == 0) {
 			if (data_crc != 0) {
-				dbg_err("non-zero data CRC");
+				ubi_err("non-zero data CRC");
 				goto bad;
 			}
 			if (data_size != 0) {
-				dbg_err("non-zero data_size");
+				ubi_err("non-zero data_size");
 				goto bad;
 			}
 		} else {
 			if (data_size == 0) {
-				dbg_err("zero data_size of copy");
+				ubi_err("zero data_size of copy");
 				goto bad;
 			}
 		}
 		if (used_ebs != 0) {
-			dbg_err("bad used_ebs");
+			ubi_err("bad used_ebs");
 			goto bad;
 		}
 	}
@@ -956,8 +976,8 @@ static int validate_vid_hdr(const struct ubi_device *ubi,
 
 bad:
 	ubi_err("bad VID header");
-	ubi_dbg_dump_vid_hdr(vid_hdr);
-	ubi_dbg_dump_stack();
+	ubi_dump_vid_hdr(vid_hdr);
+	dump_stack();
 	return 1;
 }
 
@@ -971,22 +991,16 @@ bad:
  *
  * This function reads the volume identifier header from physical eraseblock
  * @pnum and stores it in @vid_hdr. It also checks CRC checksum of the read
- * volume identifier header. The following codes may be returned:
+ * volume identifier header. The error codes are the same as in
+ * 'ubi_io_read_ec_hdr()'.
  *
- * o %0 if the CRC checksum is correct and the header was successfully read;
- * o %UBI_IO_BITFLIPS if the CRC is correct, but bit-flips were detected
- *   and corrected by the flash driver; this is harmless but may indicate that
- *   this eraseblock may become bad soon;
- * o %UBI_IO_BAD_VID_HDR if the volume identifier header is corrupted (a CRC
- *   error detected);
- * o %UBI_IO_PEB_FREE if the physical eraseblock is free (i.e., there is no VID
- *   header there);
- * o a negative error code in case of failure.
+ * Note, the implementation of this function is also very similar to
+ * 'ubi_io_read_ec_hdr()', so refer commentaries in 'ubi_io_read_ec_hdr()'.
  */
 int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum,
 			struct ubi_vid_hdr *vid_hdr, int verbose)
 {
-	int err, read_err = 0;
+	int err, read_err;
 	uint32_t crc, magic, hdr_crc;
 	void *p;
 
@@ -994,58 +1008,36 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum,
 	ubi_assert(pnum >= 0 &&  pnum < ubi->peb_count);
 
 	p = (char *)vid_hdr - ubi->vid_hdr_shift;
-	err = ubi_io_read(ubi, p, pnum, ubi->vid_hdr_aloffset,
+	read_err = ubi_io_read(ubi, p, pnum, ubi->vid_hdr_aloffset,
 			  ubi->vid_hdr_alsize);
-	if (err) {
-		if (err != UBI_IO_BITFLIPS && err != -EBADMSG)
-			return err;
-
-		/*
-		 * We read all the data, but either a correctable bit-flip
-		 * occurred, or MTD reported about some data integrity error,
-		 * like an ECC error in case of NAND. The former is harmless,
-		 * the later may mean the read data is corrupted. But we have a
-		 * CRC check-sum and we will identify this. If the VID header is
-		 * still OK, we just report this as there was a bit-flip.
-		 */
-		read_err = err;
-	}
+	if (read_err && read_err != UBI_IO_BITFLIPS && !mtd_is_eccerr(read_err))
+		return read_err;
 
 	magic = be32_to_cpu(vid_hdr->magic);
 	if (magic != UBI_VID_HDR_MAGIC) {
-		/*
-		 * If we have read all 0xFF bytes, the VID header probably does
-		 * not exist and the physical eraseblock is assumed to be free.
-		 *
-		 * But if there was a read error, we do not test the data for
-		 * 0xFFs. Even if it does contain all 0xFFs, this error
-		 * indicates that something is still wrong with this physical
-		 * eraseblock and it cannot be regarded as free.
-		 */
-		if (read_err != -EBADMSG &&
-		    check_pattern(vid_hdr, 0xFF, UBI_VID_HDR_SIZE)) {
-			/* The physical eraseblock is supposedly free */
+		if (mtd_is_eccerr(read_err))
+			return UBI_IO_BAD_HDR_EBADMSG;
+
+		if (ubi_check_pattern(vid_hdr, 0xFF, UBI_VID_HDR_SIZE)) {
 			if (verbose)
-				ubi_warn("no VID header found at PEB %d, "
-					 "only 0xFF bytes", pnum);
-			else if (UBI_IO_DEBUG)
-				dbg_msg("no VID header found at PEB %d, "
-					"only 0xFF bytes", pnum);
-			return UBI_IO_PEB_FREE;
+				ubi_warn("no VID header found at PEB %d, only 0xFF bytes",
+					 pnum);
+			dbg_bld("no VID header found at PEB %d, only 0xFF bytes",
+				pnum);
+			if (!read_err)
+				return UBI_IO_FF;
+			else
+				return UBI_IO_FF_BITFLIPS;
 		}
 
-		/*
-		 * This is not a valid VID header, and these are not 0xFF
-		 * bytes. Report that the header is corrupted.
-		 */
 		if (verbose) {
-			ubi_warn("bad magic number at PEB %d: %08x instead of "
-				 "%08x", pnum, magic, UBI_VID_HDR_MAGIC);
-			ubi_dbg_dump_vid_hdr(vid_hdr);
-		} else if (UBI_IO_DEBUG)
-			dbg_msg("bad magic number at PEB %d: %08x instead of "
-				"%08x", pnum, magic, UBI_VID_HDR_MAGIC);
-		return UBI_IO_BAD_VID_HDR;
+			ubi_warn("bad magic number at PEB %d: %08x instead of %08x",
+				 pnum, magic, UBI_VID_HDR_MAGIC);
+			ubi_dump_vid_hdr(vid_hdr);
+		}
+		dbg_bld("bad magic number at PEB %d: %08x instead of %08x",
+			pnum, magic, UBI_VID_HDR_MAGIC);
+		return UBI_IO_BAD_HDR;
 	}
 
 	crc = crc32(UBI_CRC32_INIT, vid_hdr, UBI_VID_HDR_SIZE_CRC);
@@ -1053,16 +1045,18 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum,
 
 	if (hdr_crc != crc) {
 		if (verbose) {
-			ubi_warn("bad CRC at PEB %d, calculated %#08x, "
-				 "read %#08x", pnum, crc, hdr_crc);
-			ubi_dbg_dump_vid_hdr(vid_hdr);
-		} else if (UBI_IO_DEBUG)
-			dbg_msg("bad CRC at PEB %d, calculated %#08x, "
-				"read %#08x", pnum, crc, hdr_crc);
-		return UBI_IO_BAD_VID_HDR;
+			ubi_warn("bad CRC at PEB %d, calculated %#08x, read %#08x",
+				 pnum, crc, hdr_crc);
+			ubi_dump_vid_hdr(vid_hdr);
+		}
+		dbg_bld("bad CRC at PEB %d, calculated %#08x, read %#08x",
+			pnum, crc, hdr_crc);
+		if (!read_err)
+			return UBI_IO_BAD_HDR;
+		else
+			return UBI_IO_BAD_HDR_EBADMSG;
 	}
 
-	/* Validate the VID header that we have just read */
 	err = validate_vid_hdr(ubi, vid_hdr);
 	if (err) {
 		ubi_err("validation failed for PEB %d", pnum);
@@ -1097,7 +1091,7 @@ int ubi_io_write_vid_hdr(struct ubi_device *ubi, int pnum,
 	dbg_io("write VID header to PEB %d", pnum);
 	ubi_assert(pnum >= 0 &&  pnum < ubi->peb_count);
 
-	err = paranoid_check_peb_ec_hdr(ubi, pnum);
+	err = self_check_peb_ec_hdr(ubi, pnum);
 	if (err)
 		return err;
 
@@ -1106,7 +1100,7 @@ int ubi_io_write_vid_hdr(struct ubi_device *ubi, int pnum,
 	crc = crc32(UBI_CRC32_INIT, vid_hdr, UBI_VID_HDR_SIZE_CRC);
 	vid_hdr->hdr_crc = cpu_to_be32(crc);
 
-	err = paranoid_check_vid_hdr(ubi, pnum, vid_hdr);
+	err = self_check_vid_hdr(ubi, pnum, vid_hdr);
 	if (err)
 		return err;
 
@@ -1116,31 +1110,32 @@ int ubi_io_write_vid_hdr(struct ubi_device *ubi, int pnum,
 	return err;
 }
 
-#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
-
 /**
- * paranoid_check_not_bad - ensure that a physical eraseblock is not bad.
+ * self_check_not_bad - ensure that a physical eraseblock is not bad.
  * @ubi: UBI device description object
  * @pnum: physical eraseblock number to check
  *
  * This function returns zero if the physical eraseblock is good, %-EINVAL if
  * it is bad and a negative error code if an error occurred.
  */
-static int paranoid_check_not_bad(const struct ubi_device *ubi, int pnum)
+static int self_check_not_bad(const struct ubi_device *ubi, int pnum)
 {
 	int err;
 
+	if (!ubi_dbg_chk_io(ubi))
+		return 0;
+
 	err = ubi_io_is_bad(ubi, pnum);
 	if (!err)
 		return err;
 
-	ubi_err("paranoid check failed for PEB %d", pnum);
-	ubi_dbg_dump_stack();
+	ubi_err("self-check failed for PEB %d", pnum);
+	dump_stack();
 	return err > 0 ? -EINVAL : err;
 }
 
 /**
- * paranoid_check_ec_hdr - check if an erase counter header is all right.
+ * self_check_ec_hdr - check if an erase counter header is all right.
  * @ubi: UBI device description object
  * @pnum: physical eraseblock number the erase counter header belongs to
  * @ec_hdr: the erase counter header to check
@@ -1148,12 +1143,15 @@ static int paranoid_check_not_bad(const struct ubi_device *ubi, int pnum)
  * This function returns zero if the erase counter header contains valid
  * values, and %-EINVAL if not.
  */
-static int paranoid_check_ec_hdr(const struct ubi_device *ubi, int pnum,
-				 const struct ubi_ec_hdr *ec_hdr)
+static int self_check_ec_hdr(const struct ubi_device *ubi, int pnum,
+			     const struct ubi_ec_hdr *ec_hdr)
 {
 	int err;
 	uint32_t magic;
 
+	if (!ubi_dbg_chk_io(ubi))
+		return 0;
+
 	magic = be32_to_cpu(ec_hdr->magic);
 	if (magic != UBI_EC_HDR_MAGIC) {
 		ubi_err("bad magic %#08x, must be %#08x",
@@ -1163,52 +1161,55 @@ static int paranoid_check_ec_hdr(const struct ubi_device *ubi, int pnum,
 
 	err = validate_ec_hdr(ubi, ec_hdr);
 	if (err) {
-		ubi_err("paranoid check failed for PEB %d", pnum);
+		ubi_err("self-check failed for PEB %d", pnum);
 		goto fail;
 	}
 
 	return 0;
 
 fail:
-	ubi_dbg_dump_ec_hdr(ec_hdr);
-	ubi_dbg_dump_stack();
+	ubi_dump_ec_hdr(ec_hdr);
+	dump_stack();
 	return -EINVAL;
 }
 
 /**
- * paranoid_check_peb_ec_hdr - check erase counter header.
+ * self_check_peb_ec_hdr - check erase counter header.
  * @ubi: UBI device description object
  * @pnum: the physical eraseblock number to check
  *
  * This function returns zero if the erase counter header is all right and and
  * a negative error code if not or if an error occurred.
  */
-static int paranoid_check_peb_ec_hdr(const struct ubi_device *ubi, int pnum)
+static int self_check_peb_ec_hdr(const struct ubi_device *ubi, int pnum)
 {
 	int err;
 	uint32_t crc, hdr_crc;
 	struct ubi_ec_hdr *ec_hdr;
 
+	if (!ubi_dbg_chk_io(ubi))
+		return 0;
+
 	ec_hdr = kzalloc(ubi->ec_hdr_alsize, GFP_NOFS);
 	if (!ec_hdr)
 		return -ENOMEM;
 
 	err = ubi_io_read(ubi, ec_hdr, pnum, 0, UBI_EC_HDR_SIZE);
-	if (err && err != UBI_IO_BITFLIPS && err != -EBADMSG)
+	if (err && err != UBI_IO_BITFLIPS && !mtd_is_eccerr(err))
 		goto exit;
 
 	crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC);
 	hdr_crc = be32_to_cpu(ec_hdr->hdr_crc);
 	if (hdr_crc != crc) {
 		ubi_err("bad CRC, calculated %#08x, read %#08x", crc, hdr_crc);
-		ubi_err("paranoid check failed for PEB %d", pnum);
-		ubi_dbg_dump_ec_hdr(ec_hdr);
-		ubi_dbg_dump_stack();
+		ubi_err("self-check failed for PEB %d", pnum);
+		ubi_dump_ec_hdr(ec_hdr);
+		dump_stack();
 		err = -EINVAL;
 		goto exit;
 	}
 
-	err = paranoid_check_ec_hdr(ubi, pnum, ec_hdr);
+	err = self_check_ec_hdr(ubi, pnum, ec_hdr);
 
 exit:
 	kfree(ec_hdr);
@@ -1216,7 +1217,7 @@ exit:
 }
 
 /**
- * paranoid_check_vid_hdr - check that a volume identifier header is all right.
+ * self_check_vid_hdr - check that a volume identifier header is all right.
  * @ubi: UBI device description object
  * @pnum: physical eraseblock number the volume identifier header belongs to
  * @vid_hdr: the volume identifier header to check
@@ -1224,12 +1225,15 @@ exit:
  * This function returns zero if the volume identifier header is all right, and
  * %-EINVAL if not.
  */
-static int paranoid_check_vid_hdr(const struct ubi_device *ubi, int pnum,
-				  const struct ubi_vid_hdr *vid_hdr)
+static int self_check_vid_hdr(const struct ubi_device *ubi, int pnum,
+			      const struct ubi_vid_hdr *vid_hdr)
 {
 	int err;
 	uint32_t magic;
 
+	if (!ubi_dbg_chk_io(ubi))
+		return 0;
+
 	magic = be32_to_cpu(vid_hdr->magic);
 	if (magic != UBI_VID_HDR_MAGIC) {
 		ubi_err("bad VID header magic %#08x at PEB %d, must be %#08x",
@@ -1239,35 +1243,38 @@ static int paranoid_check_vid_hdr(const struct ubi_device *ubi, int pnum,
 
 	err = validate_vid_hdr(ubi, vid_hdr);
 	if (err) {
-		ubi_err("paranoid check failed for PEB %d", pnum);
+		ubi_err("self-check failed for PEB %d", pnum);
 		goto fail;
 	}
 
 	return err;
 
 fail:
-	ubi_err("paranoid check failed for PEB %d", pnum);
-	ubi_dbg_dump_vid_hdr(vid_hdr);
-	ubi_dbg_dump_stack();
+	ubi_err("self-check failed for PEB %d", pnum);
+	ubi_dump_vid_hdr(vid_hdr);
+	dump_stack();
 	return -EINVAL;
 
 }
 
 /**
- * paranoid_check_peb_vid_hdr - check volume identifier header.
+ * self_check_peb_vid_hdr - check volume identifier header.
  * @ubi: UBI device description object
  * @pnum: the physical eraseblock number to check
  *
  * This function returns zero if the volume identifier header is all right,
  * and a negative error code if not or if an error occurred.
  */
-static int paranoid_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum)
+static int self_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum)
 {
 	int err;
 	uint32_t crc, hdr_crc;
 	struct ubi_vid_hdr *vid_hdr;
 	void *p;
 
+	if (!ubi_dbg_chk_io(ubi))
+		return 0;
+
 	vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS);
 	if (!vid_hdr)
 		return -ENOMEM;
@@ -1275,22 +1282,22 @@ static int paranoid_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum)
 	p = (char *)vid_hdr - ubi->vid_hdr_shift;
 	err = ubi_io_read(ubi, p, pnum, ubi->vid_hdr_aloffset,
 			  ubi->vid_hdr_alsize);
-	if (err && err != UBI_IO_BITFLIPS && err != -EBADMSG)
+	if (err && err != UBI_IO_BITFLIPS && !mtd_is_eccerr(err))
 		goto exit;
 
 	crc = crc32(UBI_CRC32_INIT, vid_hdr, UBI_EC_HDR_SIZE_CRC);
 	hdr_crc = be32_to_cpu(vid_hdr->hdr_crc);
 	if (hdr_crc != crc) {
-		ubi_err("bad VID header CRC at PEB %d, calculated %#08x, "
-			"read %#08x", pnum, crc, hdr_crc);
-		ubi_err("paranoid check failed for PEB %d", pnum);
-		ubi_dbg_dump_vid_hdr(vid_hdr);
-		ubi_dbg_dump_stack();
+		ubi_err("bad VID header CRC at PEB %d, calculated %#08x, read %#08x",
+			pnum, crc, hdr_crc);
+		ubi_err("self-check failed for PEB %d", pnum);
+		ubi_dump_vid_hdr(vid_hdr);
+		dump_stack();
 		err = -EINVAL;
 		goto exit;
 	}
 
-	err = paranoid_check_vid_hdr(ubi, pnum, vid_hdr);
+	err = self_check_vid_hdr(ubi, pnum, vid_hdr);
 
 exit:
 	ubi_free_vid_hdr(ubi, vid_hdr);
@@ -1298,7 +1305,7 @@ exit:
 }
 
 /**
- * ubi_dbg_check_write - make sure write succeeded.
+ * self_check_write - make sure write succeeded.
  * @ubi: UBI device description object
  * @buf: buffer with data which were written
  * @pnum: physical eraseblock number the data were written to
@@ -1309,25 +1316,36 @@ exit:
  * the original data buffer - the data have to match. Returns zero if the data
  * match and a negative error code if not or in case of failure.
  */
-int ubi_dbg_check_write(struct ubi_device *ubi, const void *buf, int pnum,
-			int offset, int len)
+static int self_check_write(struct ubi_device *ubi, const void *buf, int pnum,
+			    int offset, int len)
 {
 	int err, i;
+	size_t read;
+	void *buf1;
+	loff_t addr = (loff_t)pnum * ubi->peb_size + offset;
 
-	mutex_lock(&ubi->dbg_buf_mutex);
-	err = ubi_io_read(ubi, ubi->dbg_peb_buf, pnum, offset, len);
-	if (err)
-		goto out_unlock;
+	if (!ubi_dbg_chk_io(ubi))
+		return 0;
+
+	buf1 = __vmalloc(len, GFP_NOFS, PAGE_KERNEL);
+	if (!buf1) {
+		ubi_err("cannot allocate memory to check writes");
+		return 0;
+	}
+
+	err = mtd_read(ubi->mtd, addr, len, &read, buf1);
+	if (err && !mtd_is_bitflip(err))
+		goto out_free;
 
 	for (i = 0; i < len; i++) {
 		uint8_t c = ((uint8_t *)buf)[i];
-		uint8_t c1 = ((uint8_t *)ubi->dbg_peb_buf)[i];
+		uint8_t c1 = ((uint8_t *)buf1)[i];
 		int dump_len;
 
 		if (c == c1)
 			continue;
 
-		ubi_err("paranoid check failed for PEB %d:%d, len %d",
+		ubi_err("self-check failed for PEB %d:%d, len %d",
 			pnum, offset, len);
 		ubi_msg("data differ at position %d", i);
 		dump_len = max_t(int, 128, len - i);
@@ -1338,22 +1356,22 @@ int ubi_dbg_check_write(struct ubi_device *ubi, const void *buf, int pnum,
 		ubi_msg("hex dump of the read buffer from %d to %d",
 			i, i + dump_len);
 		print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
-			       ubi->dbg_peb_buf + i, dump_len, 1);
-		ubi_dbg_dump_stack();
+			       buf1 + i, dump_len, 1);
+		dump_stack();
 		err = -EINVAL;
-		goto out_unlock;
+		goto out_free;
 	}
-	mutex_unlock(&ubi->dbg_buf_mutex);
 
+	vfree(buf1);
 	return 0;
 
-out_unlock:
-	mutex_unlock(&ubi->dbg_buf_mutex);
+out_free:
+	vfree(buf1);
 	return err;
 }
 
 /**
- * ubi_dbg_check_all_ff - check that a region of flash is empty.
+ * ubi_self_check_all_ff - check that a region of flash is empty.
  * @ubi: UBI device description object
  * @pnum: the physical eraseblock number to check
  * @offset: the starting offset within the physical eraseblock to check
@@ -1363,40 +1381,46 @@ out_unlock:
  * @offset of the physical eraseblock @pnum, and a negative error code if not
  * or if an error occurred.
  */
-int ubi_dbg_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len)
+int ubi_self_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len)
 {
 	size_t read;
 	int err;
+	void *buf;
 	loff_t addr = (loff_t)pnum * ubi->peb_size + offset;
 
-	mutex_lock(&ubi->dbg_buf_mutex);
-	err = ubi->mtd->read(ubi->mtd, addr, len, &read, ubi->dbg_peb_buf);
-	if (err && err != -EUCLEAN) {
-		ubi_err("error %d while reading %d bytes from PEB %d:%d, "
-			"read %zd bytes", err, len, pnum, offset, read);
+	if (!ubi_dbg_chk_io(ubi))
+		return 0;
+
+	buf = __vmalloc(len, GFP_NOFS, PAGE_KERNEL);
+	if (!buf) {
+		ubi_err("cannot allocate memory to check for 0xFFs");
+		return 0;
+	}
+
+	err = mtd_read(ubi->mtd, addr, len, &read, buf);
+	if (err && !mtd_is_bitflip(err)) {
+		ubi_err("error %d while reading %d bytes from PEB %d:%d, read %zd bytes",
+			err, len, pnum, offset, read);
 		goto error;
 	}
 
-	err = check_pattern(ubi->dbg_peb_buf, 0xFF, len);
+	err = ubi_check_pattern(buf, 0xFF, len);
 	if (err == 0) {
-		ubi_err("flash region at PEB %d:%d, length %d does not "
-			"contain all 0xFF bytes", pnum, offset, len);
+		ubi_err("flash region at PEB %d:%d, length %d does not contain all 0xFF bytes",
+			pnum, offset, len);
 		goto fail;
 	}
-	mutex_unlock(&ubi->dbg_buf_mutex);
 
+	vfree(buf);
 	return 0;
 
 fail:
-	ubi_err("paranoid check failed for PEB %d", pnum);
+	ubi_err("self-check failed for PEB %d", pnum);
 	ubi_msg("hex dump of the %d-%d region", offset, offset + len);
-	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
-		       ubi->dbg_peb_buf, len, 1);
+	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1, buf, len, 1);
 	err = -EINVAL;
 error:
-	ubi_dbg_dump_stack();
-	mutex_unlock(&ubi->dbg_buf_mutex);
+	dump_stack();
+	vfree(buf);
 	return err;
 }
-
-#endif /* CONFIG_MTD_UBI_DEBUG_PARANOID */
diff --git a/drivers/mtd/ubi/kapi.c b/drivers/mtd/ubi/kapi.c
index 69fa4ef03c5..3aac1acceeb 100644
--- a/drivers/mtd/ubi/kapi.c
+++ b/drivers/mtd/ubi/kapi.c
@@ -40,7 +40,9 @@ void ubi_do_get_device_info(struct ubi_device *ubi, struct ubi_device_info *di)
 {
 	di->ubi_num = ubi->ubi_num;
 	di->leb_size = ubi->leb_size;
+	di->leb_start = ubi->leb_start;
 	di->min_io_size = ubi->min_io_size;
+	di->max_write_size = ubi->max_write_size;
 	di->ro_mode = ubi->ro_mode;
 	di->cdev = ubi->cdev.dev;
 }
@@ -219,7 +221,7 @@ out_free:
 	kfree(desc);
 out_put_ubi:
 	ubi_put_device(ubi);
-	dbg_err("cannot open device %d, volume %d, error %d",
+	ubi_err("cannot open device %d, volume %d, error %d",
 		ubi_num, vol_id, err);
 	return ERR_PTR(err);
 }
@@ -408,7 +410,7 @@ int ubi_leb_read(struct ubi_volume_desc *desc, int lnum, char *buf, int offset,
 		return 0;
 
 	err = ubi_eba_read_leb(ubi, vol, lnum, buf, offset, len, check);
-	if (err && err == -EBADMSG && vol->vol_type == UBI_STATIC_VOLUME) {
+	if (err && mtd_is_eccerr(err) && vol->vol_type == UBI_STATIC_VOLUME) {
 		ubi_warn("mark volume %d as corrupted", vol_id);
 		vol->corrupted = 1;
 	}
@@ -424,11 +426,9 @@ EXPORT_SYMBOL_GPL(ubi_leb_read);
  * @buf: data to write
  * @offset: offset within the logical eraseblock where to write
  * @len: how many bytes to write
- * @dtype: expected data type
  *
  * This function writes @len bytes of data from @buf to offset @offset of
- * logical eraseblock @lnum. The @dtype argument describes expected lifetime of
- * the data.
+ * logical eraseblock @lnum.
  *
  * This function takes care of physical eraseblock write failures. If write to
  * the physical eraseblock write operation fails, the logical eraseblock is
@@ -445,7 +445,7 @@ EXPORT_SYMBOL_GPL(ubi_leb_read);
  * returns immediately with %-EBADF code.
  */
 int ubi_leb_write(struct ubi_volume_desc *desc, int lnum, const void *buf,
-		  int offset, int len, int dtype)
+		  int offset, int len)
 {
 	struct ubi_volume *vol = desc->vol;
 	struct ubi_device *ubi = vol->ubi;
@@ -464,17 +464,13 @@ int ubi_leb_write(struct ubi_volume_desc *desc, int lnum, const void *buf,
 	    offset & (ubi->min_io_size - 1) || len & (ubi->min_io_size - 1))
 		return -EINVAL;
 
-	if (dtype != UBI_LONGTERM && dtype != UBI_SHORTTERM &&
-	    dtype != UBI_UNKNOWN)
-		return -EINVAL;
-
 	if (vol->upd_marker)
 		return -EBADF;
 
 	if (len == 0)
 		return 0;
 
-	return ubi_eba_write_leb(ubi, vol, lnum, buf, offset, len, dtype);
+	return ubi_eba_write_leb(ubi, vol, lnum, buf, offset, len);
 }
 EXPORT_SYMBOL_GPL(ubi_leb_write);
 
@@ -484,7 +480,6 @@ EXPORT_SYMBOL_GPL(ubi_leb_write);
  * @lnum: logical eraseblock number to change
  * @buf: data to write
  * @len: how many bytes to write
- * @dtype: expected data type
  *
  * This function changes the contents of a logical eraseblock atomically. @buf
  * has to contain new logical eraseblock data, and @len - the length of the
@@ -495,7 +490,7 @@ EXPORT_SYMBOL_GPL(ubi_leb_write);
  * code in case of failure.
  */
 int ubi_leb_change(struct ubi_volume_desc *desc, int lnum, const void *buf,
-		   int len, int dtype)
+		   int len)
 {
 	struct ubi_volume *vol = desc->vol;
 	struct ubi_device *ubi = vol->ubi;
@@ -513,17 +508,13 @@ int ubi_leb_change(struct ubi_volume_desc *desc, int lnum, const void *buf,
 	    len > vol->usable_leb_size || len & (ubi->min_io_size - 1))
 		return -EINVAL;
 
-	if (dtype != UBI_LONGTERM && dtype != UBI_SHORTTERM &&
-	    dtype != UBI_UNKNOWN)
-		return -EINVAL;
-
 	if (vol->upd_marker)
 		return -EBADF;
 
 	if (len == 0)
 		return 0;
 
-	return ubi_eba_atomic_leb_change(ubi, vol, lnum, buf, len, dtype);
+	return ubi_eba_atomic_leb_change(ubi, vol, lnum, buf, len);
 }
 EXPORT_SYMBOL_GPL(ubi_leb_change);
 
@@ -560,7 +551,7 @@ int ubi_leb_erase(struct ubi_volume_desc *desc, int lnum)
 	if (err)
 		return err;
 
-	return ubi_wl_flush(ubi);
+	return ubi_wl_flush(ubi, vol->vol_id, lnum);
 }
 EXPORT_SYMBOL_GPL(ubi_leb_erase);
 
@@ -624,7 +615,6 @@ EXPORT_SYMBOL_GPL(ubi_leb_unmap);
  * ubi_leb_map - map logical eraseblock to a physical eraseblock.
  * @desc: volume descriptor
  * @lnum: logical eraseblock number
- * @dtype: expected data type
  *
  * This function maps an un-mapped logical eraseblock @lnum to a physical
  * eraseblock. This means, that after a successful invocation of this
@@ -637,7 +627,7 @@ EXPORT_SYMBOL_GPL(ubi_leb_unmap);
  * eraseblock is already mapped, and other negative error codes in case of
  * other failures.
  */
-int ubi_leb_map(struct ubi_volume_desc *desc, int lnum, int dtype)
+int ubi_leb_map(struct ubi_volume_desc *desc, int lnum)
 {
 	struct ubi_volume *vol = desc->vol;
 	struct ubi_device *ubi = vol->ubi;
@@ -650,17 +640,13 @@ int ubi_leb_map(struct ubi_volume_desc *desc, int lnum, int dtype)
 	if (lnum < 0 || lnum >= vol->reserved_pebs)
 		return -EINVAL;
 
-	if (dtype != UBI_LONGTERM && dtype != UBI_SHORTTERM &&
-	    dtype != UBI_UNKNOWN)
-		return -EINVAL;
-
 	if (vol->upd_marker)
 		return -EBADF;
 
 	if (vol->eba_tbl[lnum] >= 0)
 		return -EBADMSG;
 
-	return ubi_eba_write_leb(ubi, vol, lnum, NULL, 0, 0, dtype);
+	return ubi_eba_write_leb(ubi, vol, lnum, NULL, 0, 0);
 }
 EXPORT_SYMBOL_GPL(ubi_leb_map);
 
@@ -712,14 +698,39 @@ int ubi_sync(int ubi_num)
 	if (!ubi)
 		return -ENODEV;
 
-	if (ubi->mtd->sync)
-		ubi->mtd->sync(ubi->mtd);
-
+	mtd_sync(ubi->mtd);
 	ubi_put_device(ubi);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(ubi_sync);
 
+/**
+ * ubi_flush - flush UBI work queue.
+ * @ubi_num: UBI device to flush work queue
+ * @vol_id: volume id to flush for
+ * @lnum: logical eraseblock number to flush for
+ *
+ * This function executes all pending works for a particular volume id / logical
+ * eraseblock number pair. If either value is set to %UBI_ALL, then it acts as
+ * a wildcard for all of the corresponding volume numbers or logical
+ * eraseblock numbers. It returns zero in case of success and a negative error
+ * code in case of failure.
+ */
+int ubi_flush(int ubi_num, int vol_id, int lnum)
+{
+	struct ubi_device *ubi;
+	int err = 0;
+
+	ubi = ubi_get_device(ubi_num);
+	if (!ubi)
+		return -ENODEV;
+
+	err = ubi_wl_flush(ubi, vol_id, lnum);
+	ubi_put_device(ubi);
+	return err;
+}
+EXPORT_SYMBOL_GPL(ubi_flush);
+
 BLOCKING_NOTIFIER_HEAD(ubi_notifiers);
 
 /**
diff --git a/drivers/mtd/ubi/misc.c b/drivers/mtd/ubi/misc.c
index 22ad3140294..f913d701a5b 100644
--- a/drivers/mtd/ubi/misc.c
+++ b/drivers/mtd/ubi/misc.c
@@ -81,7 +81,7 @@ int ubi_check_volume(struct ubi_device *ubi, int vol_id)
 
 		err = ubi_eba_read_leb(ubi, vol, i, buf, 0, size, 1);
 		if (err) {
-			if (err == -EBADMSG)
+			if (mtd_is_eccerr(err))
 				err = 1;
 			break;
 		}
@@ -92,14 +92,62 @@ int ubi_check_volume(struct ubi_device *ubi, int vol_id)
 }
 
 /**
- * ubi_calculate_rsvd_pool - calculate how many PEBs must be reserved for bad
+ * ubi_update_reserved - update bad eraseblock handling accounting data.
+ * @ubi: UBI device description object
+ *
+ * This function calculates the gap between current number of PEBs reserved for
+ * bad eraseblock handling and the required level of PEBs that must be
+ * reserved, and if necessary, reserves more PEBs to fill that gap, according
+ * to availability. Should be called with ubi->volumes_lock held.
+ */
+void ubi_update_reserved(struct ubi_device *ubi)
+{
+	int need = ubi->beb_rsvd_level - ubi->beb_rsvd_pebs;
+
+	if (need <= 0 || ubi->avail_pebs == 0)
+		return;
+
+	need = min_t(int, need, ubi->avail_pebs);
+	ubi->avail_pebs -= need;
+	ubi->rsvd_pebs += need;
+	ubi->beb_rsvd_pebs += need;
+	ubi_msg("reserved more %d PEBs for bad PEB handling", need);
+}
+
+/**
+ * ubi_calculate_reserved - calculate how many PEBs must be reserved for bad
  * eraseblock handling.
  * @ubi: UBI device description object
  */
 void ubi_calculate_reserved(struct ubi_device *ubi)
 {
-	ubi->beb_rsvd_level = ubi->good_peb_count/100;
-	ubi->beb_rsvd_level *= CONFIG_MTD_UBI_BEB_RESERVE;
-	if (ubi->beb_rsvd_level < MIN_RESEVED_PEBS)
-		ubi->beb_rsvd_level = MIN_RESEVED_PEBS;
+	/*
+	 * Calculate the actual number of PEBs currently needed to be reserved
+	 * for future bad eraseblock handling.
+	 */
+	ubi->beb_rsvd_level = ubi->bad_peb_limit - ubi->bad_peb_count;
+	if (ubi->beb_rsvd_level < 0) {
+		ubi->beb_rsvd_level = 0;
+		ubi_warn("number of bad PEBs (%d) is above the expected limit (%d), not reserving any PEBs for bad PEB handling, will use available PEBs (if any)",
+			 ubi->bad_peb_count, ubi->bad_peb_limit);
+	}
+}
+
+/**
+ * ubi_check_pattern - check if buffer contains only a certain byte pattern.
+ * @buf: buffer to check
+ * @patt: the pattern to check
+ * @size: buffer size in bytes
+ *
+ * This function returns %1 in there are only @patt bytes in @buf, and %0 if
+ * something else was also found.
+ */
+int ubi_check_pattern(const void *buf, uint8_t patt, int size)
+{
+	int i;
+
+	for (i = 0; i < size; i++)
+		if (((const uint8_t *)buf)[i] != patt)
+			return 0;
+	return 1;
 }
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
deleted file mode 100644
index aed19f33b8f..00000000000
--- a/drivers/mtd/ubi/scan.c
+++ /dev/null
@@ -1,1350 +0,0 @@
-/*
- * Copyright (c) International Business Machines Corp., 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Author: Artem Bityutskiy (Битюцкий Артём)
- */
-
-/*
- * UBI scanning sub-system.
- *
- * This sub-system is responsible for scanning the flash media, checking UBI
- * headers and providing complete information about the UBI flash image.
- *
- * The scanning information is represented by a &struct ubi_scan_info' object.
- * Information about found volumes is represented by &struct ubi_scan_volume
- * objects which are kept in volume RB-tree with root at the @volumes field.
- * The RB-tree is indexed by the volume ID.
- *
- * Found logical eraseblocks are represented by &struct ubi_scan_leb objects.
- * These objects are kept in per-volume RB-trees with the root at the
- * corresponding &struct ubi_scan_volume object. To put it differently, we keep
- * an RB-tree of per-volume objects and each of these objects is the root of
- * RB-tree of per-eraseblock objects.
- *
- * Corrupted physical eraseblocks are put to the @corr list, free physical
- * eraseblocks are put to the @free list and the physical eraseblock to be
- * erased are put to the @erase list.
- */
-
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/crc32.h>
-#include <linux/math64.h>
-#include "ubi.h"
-
-#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
-static int paranoid_check_si(struct ubi_device *ubi, struct ubi_scan_info *si);
-#else
-#define paranoid_check_si(ubi, si) 0
-#endif
-
-/* Temporary variables used during scanning */
-static struct ubi_ec_hdr *ech;
-static struct ubi_vid_hdr *vidh;
-
-/**
- * add_to_list - add physical eraseblock to a list.
- * @si: scanning information
- * @pnum: physical eraseblock number to add
- * @ec: erase counter of the physical eraseblock
- * @list: the list to add to
- *
- * This function adds physical eraseblock @pnum to free, erase, corrupted or
- * alien lists. Returns zero in case of success and a negative error code in
- * case of failure.
- */
-static int add_to_list(struct ubi_scan_info *si, int pnum, int ec,
-		       struct list_head *list)
-{
-	struct ubi_scan_leb *seb;
-
-	if (list == &si->free)
-		dbg_bld("add to free: PEB %d, EC %d", pnum, ec);
-	else if (list == &si->erase)
-		dbg_bld("add to erase: PEB %d, EC %d", pnum, ec);
-	else if (list == &si->corr) {
-		dbg_bld("add to corrupted: PEB %d, EC %d", pnum, ec);
-		si->corr_count += 1;
-	} else if (list == &si->alien)
-		dbg_bld("add to alien: PEB %d, EC %d", pnum, ec);
-	else
-		BUG();
-
-	seb = kmalloc(sizeof(struct ubi_scan_leb), GFP_KERNEL);
-	if (!seb)
-		return -ENOMEM;
-
-	seb->pnum = pnum;
-	seb->ec = ec;
-	list_add_tail(&seb->u.list, list);
-	return 0;
-}
-
-/**
- * validate_vid_hdr - check volume identifier header.
- * @vid_hdr: the volume identifier header to check
- * @sv: information about the volume this logical eraseblock belongs to
- * @pnum: physical eraseblock number the VID header came from
- *
- * This function checks that data stored in @vid_hdr is consistent. Returns
- * non-zero if an inconsistency was found and zero if not.
- *
- * Note, UBI does sanity check of everything it reads from the flash media.
- * Most of the checks are done in the I/O sub-system. Here we check that the
- * information in the VID header is consistent to the information in other VID
- * headers of the same volume.
- */
-static int validate_vid_hdr(const struct ubi_vid_hdr *vid_hdr,
-			    const struct ubi_scan_volume *sv, int pnum)
-{
-	int vol_type = vid_hdr->vol_type;
-	int vol_id = be32_to_cpu(vid_hdr->vol_id);
-	int used_ebs = be32_to_cpu(vid_hdr->used_ebs);
-	int data_pad = be32_to_cpu(vid_hdr->data_pad);
-
-	if (sv->leb_count != 0) {
-		int sv_vol_type;
-
-		/*
-		 * This is not the first logical eraseblock belonging to this
-		 * volume. Ensure that the data in its VID header is consistent
-		 * to the data in previous logical eraseblock headers.
-		 */
-
-		if (vol_id != sv->vol_id) {
-			dbg_err("inconsistent vol_id");
-			goto bad;
-		}
-
-		if (sv->vol_type == UBI_STATIC_VOLUME)
-			sv_vol_type = UBI_VID_STATIC;
-		else
-			sv_vol_type = UBI_VID_DYNAMIC;
-
-		if (vol_type != sv_vol_type) {
-			dbg_err("inconsistent vol_type");
-			goto bad;
-		}
-
-		if (used_ebs != sv->used_ebs) {
-			dbg_err("inconsistent used_ebs");
-			goto bad;
-		}
-
-		if (data_pad != sv->data_pad) {
-			dbg_err("inconsistent data_pad");
-			goto bad;
-		}
-	}
-
-	return 0;
-
-bad:
-	ubi_err("inconsistent VID header at PEB %d", pnum);
-	ubi_dbg_dump_vid_hdr(vid_hdr);
-	ubi_dbg_dump_sv(sv);
-	return -EINVAL;
-}
-
-/**
- * add_volume - add volume to the scanning information.
- * @si: scanning information
- * @vol_id: ID of the volume to add
- * @pnum: physical eraseblock number
- * @vid_hdr: volume identifier header
- *
- * If the volume corresponding to the @vid_hdr logical eraseblock is already
- * present in the scanning information, this function does nothing. Otherwise
- * it adds corresponding volume to the scanning information. Returns a pointer
- * to the scanning volume object in case of success and a negative error code
- * in case of failure.
- */
-static struct ubi_scan_volume *add_volume(struct ubi_scan_info *si, int vol_id,
-					  int pnum,
-					  const struct ubi_vid_hdr *vid_hdr)
-{
-	struct ubi_scan_volume *sv;
-	struct rb_node **p = &si->volumes.rb_node, *parent = NULL;
-
-	ubi_assert(vol_id == be32_to_cpu(vid_hdr->vol_id));
-
-	/* Walk the volume RB-tree to look if this volume is already present */
-	while (*p) {
-		parent = *p;
-		sv = rb_entry(parent, struct ubi_scan_volume, rb);
-
-		if (vol_id == sv->vol_id)
-			return sv;
-
-		if (vol_id > sv->vol_id)
-			p = &(*p)->rb_left;
-		else
-			p = &(*p)->rb_right;
-	}
-
-	/* The volume is absent - add it */
-	sv = kmalloc(sizeof(struct ubi_scan_volume), GFP_KERNEL);
-	if (!sv)
-		return ERR_PTR(-ENOMEM);
-
-	sv->highest_lnum = sv->leb_count = 0;
-	sv->vol_id = vol_id;
-	sv->root = RB_ROOT;
-	sv->used_ebs = be32_to_cpu(vid_hdr->used_ebs);
-	sv->data_pad = be32_to_cpu(vid_hdr->data_pad);
-	sv->compat = vid_hdr->compat;
-	sv->vol_type = vid_hdr->vol_type == UBI_VID_DYNAMIC ? UBI_DYNAMIC_VOLUME
-							    : UBI_STATIC_VOLUME;
-	if (vol_id > si->highest_vol_id)
-		si->highest_vol_id = vol_id;
-
-	rb_link_node(&sv->rb, parent, p);
-	rb_insert_color(&sv->rb, &si->volumes);
-	si->vols_found += 1;
-	dbg_bld("added volume %d", vol_id);
-	return sv;
-}
-
-/**
- * compare_lebs - find out which logical eraseblock is newer.
- * @ubi: UBI device description object
- * @seb: first logical eraseblock to compare
- * @pnum: physical eraseblock number of the second logical eraseblock to
- * compare
- * @vid_hdr: volume identifier header of the second logical eraseblock
- *
- * This function compares 2 copies of a LEB and informs which one is newer. In
- * case of success this function returns a positive value, in case of failure, a
- * negative error code is returned. The success return codes use the following
- * bits:
- *     o bit 0 is cleared: the first PEB (described by @seb) is newer than the
- *       second PEB (described by @pnum and @vid_hdr);
- *     o bit 0 is set: the second PEB is newer;
- *     o bit 1 is cleared: no bit-flips were detected in the newer LEB;
- *     o bit 1 is set: bit-flips were detected in the newer LEB;
- *     o bit 2 is cleared: the older LEB is not corrupted;
- *     o bit 2 is set: the older LEB is corrupted.
- */
-static int compare_lebs(struct ubi_device *ubi, const struct ubi_scan_leb *seb,
-			int pnum, const struct ubi_vid_hdr *vid_hdr)
-{
-	void *buf;
-	int len, err, second_is_newer, bitflips = 0, corrupted = 0;
-	uint32_t data_crc, crc;
-	struct ubi_vid_hdr *vh = NULL;
-	unsigned long long sqnum2 = be64_to_cpu(vid_hdr->sqnum);
-
-	if (sqnum2 == seb->sqnum) {
-		/*
-		 * This must be a really ancient UBI image which has been
-		 * created before sequence numbers support has been added. At
-		 * that times we used 32-bit LEB versions stored in logical
-		 * eraseblocks. That was before UBI got into mainline. We do not
-		 * support these images anymore. Well, those images will work
-		 * still work, but only if no unclean reboots happened.
-		 */
-		ubi_err("unsupported on-flash UBI format\n");
-		return -EINVAL;
-	}
-
-	/* Obviously the LEB with lower sequence counter is older */
-	second_is_newer = !!(sqnum2 > seb->sqnum);
-
-	/*
-	 * Now we know which copy is newer. If the copy flag of the PEB with
-	 * newer version is not set, then we just return, otherwise we have to
-	 * check data CRC. For the second PEB we already have the VID header,
-	 * for the first one - we'll need to re-read it from flash.
-	 *
-	 * Note: this may be optimized so that we wouldn't read twice.
-	 */
-
-	if (second_is_newer) {
-		if (!vid_hdr->copy_flag) {
-			/* It is not a copy, so it is newer */
-			dbg_bld("second PEB %d is newer, copy_flag is unset",
-				pnum);
-			return 1;
-		}
-	} else {
-		pnum = seb->pnum;
-
-		vh = ubi_zalloc_vid_hdr(ubi, GFP_KERNEL);
-		if (!vh)
-			return -ENOMEM;
-
-		err = ubi_io_read_vid_hdr(ubi, pnum, vh, 0);
-		if (err) {
-			if (err == UBI_IO_BITFLIPS)
-				bitflips = 1;
-			else {
-				dbg_err("VID of PEB %d header is bad, but it "
-					"was OK earlier", pnum);
-				if (err > 0)
-					err = -EIO;
-
-				goto out_free_vidh;
-			}
-		}
-
-		if (!vh->copy_flag) {
-			/* It is not a copy, so it is newer */
-			dbg_bld("first PEB %d is newer, copy_flag is unset",
-				pnum);
-			err = bitflips << 1;
-			goto out_free_vidh;
-		}
-
-		vid_hdr = vh;
-	}
-
-	/* Read the data of the copy and check the CRC */
-
-	len = be32_to_cpu(vid_hdr->data_size);
-	buf = vmalloc(len);
-	if (!buf) {
-		err = -ENOMEM;
-		goto out_free_vidh;
-	}
-
-	err = ubi_io_read_data(ubi, buf, pnum, 0, len);
-	if (err && err != UBI_IO_BITFLIPS && err != -EBADMSG)
-		goto out_free_buf;
-
-	data_crc = be32_to_cpu(vid_hdr->data_crc);
-	crc = crc32(UBI_CRC32_INIT, buf, len);
-	if (crc != data_crc) {
-		dbg_bld("PEB %d CRC error: calculated %#08x, must be %#08x",
-			pnum, crc, data_crc);
-		corrupted = 1;
-		bitflips = 0;
-		second_is_newer = !second_is_newer;
-	} else {
-		dbg_bld("PEB %d CRC is OK", pnum);
-		bitflips = !!err;
-	}
-
-	vfree(buf);
-	ubi_free_vid_hdr(ubi, vh);
-
-	if (second_is_newer)
-		dbg_bld("second PEB %d is newer, copy_flag is set", pnum);
-	else
-		dbg_bld("first PEB %d is newer, copy_flag is set", pnum);
-
-	return second_is_newer | (bitflips << 1) | (corrupted << 2);
-
-out_free_buf:
-	vfree(buf);
-out_free_vidh:
-	ubi_free_vid_hdr(ubi, vh);
-	return err;
-}
-
-/**
- * ubi_scan_add_used - add physical eraseblock to the scanning information.
- * @ubi: UBI device description object
- * @si: scanning information
- * @pnum: the physical eraseblock number
- * @ec: erase counter
- * @vid_hdr: the volume identifier header
- * @bitflips: if bit-flips were detected when this physical eraseblock was read
- *
- * This function adds information about a used physical eraseblock to the
- * 'used' tree of the corresponding volume. The function is rather complex
- * because it has to handle cases when this is not the first physical
- * eraseblock belonging to the same logical eraseblock, and the newer one has
- * to be picked, while the older one has to be dropped. This function returns
- * zero in case of success and a negative error code in case of failure.
- */
-int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
-		      int pnum, int ec, const struct ubi_vid_hdr *vid_hdr,
-		      int bitflips)
-{
-	int err, vol_id, lnum;
-	unsigned long long sqnum;
-	struct ubi_scan_volume *sv;
-	struct ubi_scan_leb *seb;
-	struct rb_node **p, *parent = NULL;
-
-	vol_id = be32_to_cpu(vid_hdr->vol_id);
-	lnum = be32_to_cpu(vid_hdr->lnum);
-	sqnum = be64_to_cpu(vid_hdr->sqnum);
-
-	dbg_bld("PEB %d, LEB %d:%d, EC %d, sqnum %llu, bitflips %d",
-		pnum, vol_id, lnum, ec, sqnum, bitflips);
-
-	sv = add_volume(si, vol_id, pnum, vid_hdr);
-	if (IS_ERR(sv))
-		return PTR_ERR(sv);
-
-	if (si->max_sqnum < sqnum)
-		si->max_sqnum = sqnum;
-
-	/*
-	 * Walk the RB-tree of logical eraseblocks of volume @vol_id to look
-	 * if this is the first instance of this logical eraseblock or not.
-	 */
-	p = &sv->root.rb_node;
-	while (*p) {
-		int cmp_res;
-
-		parent = *p;
-		seb = rb_entry(parent, struct ubi_scan_leb, u.rb);
-		if (lnum != seb->lnum) {
-			if (lnum < seb->lnum)
-				p = &(*p)->rb_left;
-			else
-				p = &(*p)->rb_right;
-			continue;
-		}
-
-		/*
-		 * There is already a physical eraseblock describing the same
-		 * logical eraseblock present.
-		 */
-
-		dbg_bld("this LEB already exists: PEB %d, sqnum %llu, "
-			"EC %d", seb->pnum, seb->sqnum, seb->ec);
-
-		/*
-		 * Make sure that the logical eraseblocks have different
-		 * sequence numbers. Otherwise the image is bad.
-		 *
-		 * However, if the sequence number is zero, we assume it must
-		 * be an ancient UBI image from the era when UBI did not have
-		 * sequence numbers. We still can attach these images, unless
-		 * there is a need to distinguish between old and new
-		 * eraseblocks, in which case we'll refuse the image in
-		 * 'compare_lebs()'. In other words, we attach old clean
-		 * images, but refuse attaching old images with duplicated
-		 * logical eraseblocks because there was an unclean reboot.
-		 */
-		if (seb->sqnum == sqnum && sqnum != 0) {
-			ubi_err("two LEBs with same sequence number %llu",
-				sqnum);
-			ubi_dbg_dump_seb(seb, 0);
-			ubi_dbg_dump_vid_hdr(vid_hdr);
-			return -EINVAL;
-		}
-
-		/*
-		 * Now we have to drop the older one and preserve the newer
-		 * one.
-		 */
-		cmp_res = compare_lebs(ubi, seb, pnum, vid_hdr);
-		if (cmp_res < 0)
-			return cmp_res;
-
-		if (cmp_res & 1) {
-			/*
-			 * This logical eraseblock is newer than the one
-			 * found earlier.
-			 */
-			err = validate_vid_hdr(vid_hdr, sv, pnum);
-			if (err)
-				return err;
-
-			if (cmp_res & 4)
-				err = add_to_list(si, seb->pnum, seb->ec,
-						  &si->corr);
-			else
-				err = add_to_list(si, seb->pnum, seb->ec,
-						  &si->erase);
-			if (err)
-				return err;
-
-			seb->ec = ec;
-			seb->pnum = pnum;
-			seb->scrub = ((cmp_res & 2) || bitflips);
-			seb->sqnum = sqnum;
-
-			if (sv->highest_lnum == lnum)
-				sv->last_data_size =
-					be32_to_cpu(vid_hdr->data_size);
-
-			return 0;
-		} else {
-			/*
-			 * This logical eraseblock is older than the one found
-			 * previously.
-			 */
-			if (cmp_res & 4)
-				return add_to_list(si, pnum, ec, &si->corr);
-			else
-				return add_to_list(si, pnum, ec, &si->erase);
-		}
-	}
-
-	/*
-	 * We've met this logical eraseblock for the first time, add it to the
-	 * scanning information.
-	 */
-
-	err = validate_vid_hdr(vid_hdr, sv, pnum);
-	if (err)
-		return err;
-
-	seb = kmalloc(sizeof(struct ubi_scan_leb), GFP_KERNEL);
-	if (!seb)
-		return -ENOMEM;
-
-	seb->ec = ec;
-	seb->pnum = pnum;
-	seb->lnum = lnum;
-	seb->sqnum = sqnum;
-	seb->scrub = bitflips;
-
-	if (sv->highest_lnum <= lnum) {
-		sv->highest_lnum = lnum;
-		sv->last_data_size = be32_to_cpu(vid_hdr->data_size);
-	}
-
-	sv->leb_count += 1;
-	rb_link_node(&seb->u.rb, parent, p);
-	rb_insert_color(&seb->u.rb, &sv->root);
-	return 0;
-}
-
-/**
- * ubi_scan_find_sv - find volume in the scanning information.
- * @si: scanning information
- * @vol_id: the requested volume ID
- *
- * This function returns a pointer to the volume description or %NULL if there
- * are no data about this volume in the scanning information.
- */
-struct ubi_scan_volume *ubi_scan_find_sv(const struct ubi_scan_info *si,
-					 int vol_id)
-{
-	struct ubi_scan_volume *sv;
-	struct rb_node *p = si->volumes.rb_node;
-
-	while (p) {
-		sv = rb_entry(p, struct ubi_scan_volume, rb);
-
-		if (vol_id == sv->vol_id)
-			return sv;
-
-		if (vol_id > sv->vol_id)
-			p = p->rb_left;
-		else
-			p = p->rb_right;
-	}
-
-	return NULL;
-}
-
-/**
- * ubi_scan_find_seb - find LEB in the volume scanning information.
- * @sv: a pointer to the volume scanning information
- * @lnum: the requested logical eraseblock
- *
- * This function returns a pointer to the scanning logical eraseblock or %NULL
- * if there are no data about it in the scanning volume information.
- */
-struct ubi_scan_leb *ubi_scan_find_seb(const struct ubi_scan_volume *sv,
-				       int lnum)
-{
-	struct ubi_scan_leb *seb;
-	struct rb_node *p = sv->root.rb_node;
-
-	while (p) {
-		seb = rb_entry(p, struct ubi_scan_leb, u.rb);
-
-		if (lnum == seb->lnum)
-			return seb;
-
-		if (lnum > seb->lnum)
-			p = p->rb_left;
-		else
-			p = p->rb_right;
-	}
-
-	return NULL;
-}
-
-/**
- * ubi_scan_rm_volume - delete scanning information about a volume.
- * @si: scanning information
- * @sv: the volume scanning information to delete
- */
-void ubi_scan_rm_volume(struct ubi_scan_info *si, struct ubi_scan_volume *sv)
-{
-	struct rb_node *rb;
-	struct ubi_scan_leb *seb;
-
-	dbg_bld("remove scanning information about volume %d", sv->vol_id);
-
-	while ((rb = rb_first(&sv->root))) {
-		seb = rb_entry(rb, struct ubi_scan_leb, u.rb);
-		rb_erase(&seb->u.rb, &sv->root);
-		list_add_tail(&seb->u.list, &si->erase);
-	}
-
-	rb_erase(&sv->rb, &si->volumes);
-	kfree(sv);
-	si->vols_found -= 1;
-}
-
-/**
- * ubi_scan_erase_peb - erase a physical eraseblock.
- * @ubi: UBI device description object
- * @si: scanning information
- * @pnum: physical eraseblock number to erase;
- * @ec: erase counter value to write (%UBI_SCAN_UNKNOWN_EC if it is unknown)
- *
- * This function erases physical eraseblock 'pnum', and writes the erase
- * counter header to it. This function should only be used on UBI device
- * initialization stages, when the EBA sub-system had not been yet initialized.
- * This function returns zero in case of success and a negative error code in
- * case of failure.
- */
-int ubi_scan_erase_peb(struct ubi_device *ubi, const struct ubi_scan_info *si,
-		       int pnum, int ec)
-{
-	int err;
-	struct ubi_ec_hdr *ec_hdr;
-
-	if ((long long)ec >= UBI_MAX_ERASECOUNTER) {
-		/*
-		 * Erase counter overflow. Upgrade UBI and use 64-bit
-		 * erase counters internally.
-		 */
-		ubi_err("erase counter overflow at PEB %d, EC %d", pnum, ec);
-		return -EINVAL;
-	}
-
-	ec_hdr = kzalloc(ubi->ec_hdr_alsize, GFP_KERNEL);
-	if (!ec_hdr)
-		return -ENOMEM;
-
-	ec_hdr->ec = cpu_to_be64(ec);
-
-	err = ubi_io_sync_erase(ubi, pnum, 0);
-	if (err < 0)
-		goto out_free;
-
-	err = ubi_io_write_ec_hdr(ubi, pnum, ec_hdr);
-
-out_free:
-	kfree(ec_hdr);
-	return err;
-}
-
-/**
- * ubi_scan_get_free_peb - get a free physical eraseblock.
- * @ubi: UBI device description object
- * @si: scanning information
- *
- * This function returns a free physical eraseblock. It is supposed to be
- * called on the UBI initialization stages when the wear-leveling sub-system is
- * not initialized yet. This function picks a physical eraseblocks from one of
- * the lists, writes the EC header if it is needed, and removes it from the
- * list.
- *
- * This function returns scanning physical eraseblock information in case of
- * success and an error code in case of failure.
- */
-struct ubi_scan_leb *ubi_scan_get_free_peb(struct ubi_device *ubi,
-					   struct ubi_scan_info *si)
-{
-	int err = 0, i;
-	struct ubi_scan_leb *seb;
-
-	if (!list_empty(&si->free)) {
-		seb = list_entry(si->free.next, struct ubi_scan_leb, u.list);
-		list_del(&seb->u.list);
-		dbg_bld("return free PEB %d, EC %d", seb->pnum, seb->ec);
-		return seb;
-	}
-
-	for (i = 0; i < 2; i++) {
-		struct list_head *head;
-		struct ubi_scan_leb *tmp_seb;
-
-		if (i == 0)
-			head = &si->erase;
-		else
-			head = &si->corr;
-
-		/*
-		 * We try to erase the first physical eraseblock from the @head
-		 * list and pick it if we succeed, or try to erase the
-		 * next one if not. And so forth. We don't want to take care
-		 * about bad eraseblocks here - they'll be handled later.
-		 */
-		list_for_each_entry_safe(seb, tmp_seb, head, u.list) {
-			if (seb->ec == UBI_SCAN_UNKNOWN_EC)
-				seb->ec = si->mean_ec;
-
-			err = ubi_scan_erase_peb(ubi, si, seb->pnum, seb->ec+1);
-			if (err)
-				continue;
-
-			seb->ec += 1;
-			list_del(&seb->u.list);
-			dbg_bld("return PEB %d, EC %d", seb->pnum, seb->ec);
-			return seb;
-		}
-	}
-
-	ubi_err("no eraseblocks found");
-	return ERR_PTR(-ENOSPC);
-}
-
-/**
- * process_eb - read, check UBI headers, and add them to scanning information.
- * @ubi: UBI device description object
- * @si: scanning information
- * @pnum: the physical eraseblock number
- *
- * This function returns a zero if the physical eraseblock was successfully
- * handled and a negative error code in case of failure.
- */
-static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
-		      int pnum)
-{
-	long long uninitialized_var(ec);
-	int err, bitflips = 0, vol_id, ec_corr = 0;
-
-	dbg_bld("scan PEB %d", pnum);
-
-	/* Skip bad physical eraseblocks */
-	err = ubi_io_is_bad(ubi, pnum);
-	if (err < 0)
-		return err;
-	else if (err) {
-		/*
-		 * FIXME: this is actually duty of the I/O sub-system to
-		 * initialize this, but MTD does not provide enough
-		 * information.
-		 */
-		si->bad_peb_count += 1;
-		return 0;
-	}
-
-	err = ubi_io_read_ec_hdr(ubi, pnum, ech, 0);
-	if (err < 0)
-		return err;
-	else if (err == UBI_IO_BITFLIPS)
-		bitflips = 1;
-	else if (err == UBI_IO_PEB_EMPTY)
-		return add_to_list(si, pnum, UBI_SCAN_UNKNOWN_EC, &si->erase);
-	else if (err == UBI_IO_BAD_EC_HDR) {
-		/*
-		 * We have to also look at the VID header, possibly it is not
-		 * corrupted. Set %bitflips flag in order to make this PEB be
-		 * moved and EC be re-created.
-		 */
-		ec_corr = 1;
-		ec = UBI_SCAN_UNKNOWN_EC;
-		bitflips = 1;
-	}
-
-	si->is_empty = 0;
-
-	if (!ec_corr) {
-		int image_seq;
-
-		/* Make sure UBI version is OK */
-		if (ech->version != UBI_VERSION) {
-			ubi_err("this UBI version is %d, image version is %d",
-				UBI_VERSION, (int)ech->version);
-			return -EINVAL;
-		}
-
-		ec = be64_to_cpu(ech->ec);
-		if (ec > UBI_MAX_ERASECOUNTER) {
-			/*
-			 * Erase counter overflow. The EC headers have 64 bits
-			 * reserved, but we anyway make use of only 31 bit
-			 * values, as this seems to be enough for any existing
-			 * flash. Upgrade UBI and use 64-bit erase counters
-			 * internally.
-			 */
-			ubi_err("erase counter overflow, max is %d",
-				UBI_MAX_ERASECOUNTER);
-			ubi_dbg_dump_ec_hdr(ech);
-			return -EINVAL;
-		}
-
-		/*
-		 * Make sure that all PEBs have the same image sequence number.
-		 * This allows us to detect situations when users flash UBI
-		 * images incorrectly, so that the flash has the new UBI image
-		 * and leftovers from the old one. This feature was added
-		 * relatively recently, and the sequence number was always
-		 * zero, because old UBI implementations always set it to zero.
-		 * For this reasons, we do not panic if some PEBs have zero
-		 * sequence number, while other PEBs have non-zero sequence
-		 * number.
-		 */
-		image_seq = be32_to_cpu(ech->image_seq);
-		if (!ubi->image_seq && image_seq)
-			ubi->image_seq = image_seq;
-		if (ubi->image_seq && image_seq &&
-		    ubi->image_seq != image_seq) {
-			ubi_err("bad image sequence number %d in PEB %d, "
-				"expected %d", image_seq, pnum, ubi->image_seq);
-			ubi_dbg_dump_ec_hdr(ech);
-			return -EINVAL;
-		}
-	}
-
-	/* OK, we've done with the EC header, let's look at the VID header */
-
-	err = ubi_io_read_vid_hdr(ubi, pnum, vidh, 0);
-	if (err < 0)
-		return err;
-	else if (err == UBI_IO_BITFLIPS)
-		bitflips = 1;
-	else if (err == UBI_IO_BAD_VID_HDR ||
-		 (err == UBI_IO_PEB_FREE && ec_corr)) {
-		/* VID header is corrupted */
-		err = add_to_list(si, pnum, ec, &si->corr);
-		if (err)
-			return err;
-		goto adjust_mean_ec;
-	} else if (err == UBI_IO_PEB_FREE) {
-		/* No VID header - the physical eraseblock is free */
-		err = add_to_list(si, pnum, ec, &si->free);
-		if (err)
-			return err;
-		goto adjust_mean_ec;
-	}
-
-	vol_id = be32_to_cpu(vidh->vol_id);
-	if (vol_id > UBI_MAX_VOLUMES && vol_id != UBI_LAYOUT_VOLUME_ID) {
-		int lnum = be32_to_cpu(vidh->lnum);
-
-		/* Unsupported internal volume */
-		switch (vidh->compat) {
-		case UBI_COMPAT_DELETE:
-			ubi_msg("\"delete\" compatible internal volume %d:%d"
-				" found, remove it", vol_id, lnum);
-			err = add_to_list(si, pnum, ec, &si->corr);
-			if (err)
-				return err;
-			break;
-
-		case UBI_COMPAT_RO:
-			ubi_msg("read-only compatible internal volume %d:%d"
-				" found, switch to read-only mode",
-				vol_id, lnum);
-			ubi->ro_mode = 1;
-			break;
-
-		case UBI_COMPAT_PRESERVE:
-			ubi_msg("\"preserve\" compatible internal volume %d:%d"
-				" found", vol_id, lnum);
-			err = add_to_list(si, pnum, ec, &si->alien);
-			if (err)
-				return err;
-			si->alien_peb_count += 1;
-			return 0;
-
-		case UBI_COMPAT_REJECT:
-			ubi_err("incompatible internal volume %d:%d found",
-				vol_id, lnum);
-			return -EINVAL;
-		}
-	}
-
-	if (ec_corr)
-		ubi_warn("valid VID header but corrupted EC header at PEB %d",
-			 pnum);
-	err = ubi_scan_add_used(ubi, si, pnum, ec, vidh, bitflips);
-	if (err)
-		return err;
-
-adjust_mean_ec:
-	if (!ec_corr) {
-		si->ec_sum += ec;
-		si->ec_count += 1;
-		if (ec > si->max_ec)
-			si->max_ec = ec;
-		if (ec < si->min_ec)
-			si->min_ec = ec;
-	}
-
-	return 0;
-}
-
-/**
- * ubi_scan - scan an MTD device.
- * @ubi: UBI device description object
- *
- * This function does full scanning of an MTD device and returns complete
- * information about it. In case of failure, an error code is returned.
- */
-struct ubi_scan_info *ubi_scan(struct ubi_device *ubi)
-{
-	int err, pnum;
-	struct rb_node *rb1, *rb2;
-	struct ubi_scan_volume *sv;
-	struct ubi_scan_leb *seb;
-	struct ubi_scan_info *si;
-
-	si = kzalloc(sizeof(struct ubi_scan_info), GFP_KERNEL);
-	if (!si)
-		return ERR_PTR(-ENOMEM);
-
-	INIT_LIST_HEAD(&si->corr);
-	INIT_LIST_HEAD(&si->free);
-	INIT_LIST_HEAD(&si->erase);
-	INIT_LIST_HEAD(&si->alien);
-	si->volumes = RB_ROOT;
-	si->is_empty = 1;
-
-	err = -ENOMEM;
-	ech = kzalloc(ubi->ec_hdr_alsize, GFP_KERNEL);
-	if (!ech)
-		goto out_si;
-
-	vidh = ubi_zalloc_vid_hdr(ubi, GFP_KERNEL);
-	if (!vidh)
-		goto out_ech;
-
-	for (pnum = 0; pnum < ubi->peb_count; pnum++) {
-		cond_resched();
-
-		dbg_gen("process PEB %d", pnum);
-		err = process_eb(ubi, si, pnum);
-		if (err < 0)
-			goto out_vidh;
-	}
-
-	dbg_msg("scanning is finished");
-
-	/* Calculate mean erase counter */
-	if (si->ec_count)
-		si->mean_ec = div_u64(si->ec_sum, si->ec_count);
-
-	if (si->is_empty)
-		ubi_msg("empty MTD device detected");
-
-	/*
-	 * Few corrupted PEBs are not a problem and may be just a result of
-	 * unclean reboots. However, many of them may indicate some problems
-	 * with the flash HW or driver. Print a warning in this case.
-	 */
-	if (si->corr_count >= 8 || si->corr_count >= ubi->peb_count / 4) {
-		ubi_warn("%d PEBs are corrupted", si->corr_count);
-		printk(KERN_WARNING "corrupted PEBs are:");
-		list_for_each_entry(seb, &si->corr, u.list)
-			printk(KERN_CONT " %d", seb->pnum);
-		printk(KERN_CONT "\n");
-	}
-
-	/*
-	 * In case of unknown erase counter we use the mean erase counter
-	 * value.
-	 */
-	ubi_rb_for_each_entry(rb1, sv, &si->volumes, rb) {
-		ubi_rb_for_each_entry(rb2, seb, &sv->root, u.rb)
-			if (seb->ec == UBI_SCAN_UNKNOWN_EC)
-				seb->ec = si->mean_ec;
-	}
-
-	list_for_each_entry(seb, &si->free, u.list) {
-		if (seb->ec == UBI_SCAN_UNKNOWN_EC)
-			seb->ec = si->mean_ec;
-	}
-
-	list_for_each_entry(seb, &si->corr, u.list)
-		if (seb->ec == UBI_SCAN_UNKNOWN_EC)
-			seb->ec = si->mean_ec;
-
-	list_for_each_entry(seb, &si->erase, u.list)
-		if (seb->ec == UBI_SCAN_UNKNOWN_EC)
-			seb->ec = si->mean_ec;
-
-	err = paranoid_check_si(ubi, si);
-	if (err)
-		goto out_vidh;
-
-	ubi_free_vid_hdr(ubi, vidh);
-	kfree(ech);
-
-	return si;
-
-out_vidh:
-	ubi_free_vid_hdr(ubi, vidh);
-out_ech:
-	kfree(ech);
-out_si:
-	ubi_scan_destroy_si(si);
-	return ERR_PTR(err);
-}
-
-/**
- * destroy_sv - free the scanning volume information
- * @sv: scanning volume information
- *
- * This function destroys the volume RB-tree (@sv->root) and the scanning
- * volume information.
- */
-static void destroy_sv(struct ubi_scan_volume *sv)
-{
-	struct ubi_scan_leb *seb;
-	struct rb_node *this = sv->root.rb_node;
-
-	while (this) {
-		if (this->rb_left)
-			this = this->rb_left;
-		else if (this->rb_right)
-			this = this->rb_right;
-		else {
-			seb = rb_entry(this, struct ubi_scan_leb, u.rb);
-			this = rb_parent(this);
-			if (this) {
-				if (this->rb_left == &seb->u.rb)
-					this->rb_left = NULL;
-				else
-					this->rb_right = NULL;
-			}
-
-			kfree(seb);
-		}
-	}
-	kfree(sv);
-}
-
-/**
- * ubi_scan_destroy_si - destroy scanning information.
- * @si: scanning information
- */
-void ubi_scan_destroy_si(struct ubi_scan_info *si)
-{
-	struct ubi_scan_leb *seb, *seb_tmp;
-	struct ubi_scan_volume *sv;
-	struct rb_node *rb;
-
-	list_for_each_entry_safe(seb, seb_tmp, &si->alien, u.list) {
-		list_del(&seb->u.list);
-		kfree(seb);
-	}
-	list_for_each_entry_safe(seb, seb_tmp, &si->erase, u.list) {
-		list_del(&seb->u.list);
-		kfree(seb);
-	}
-	list_for_each_entry_safe(seb, seb_tmp, &si->corr, u.list) {
-		list_del(&seb->u.list);
-		kfree(seb);
-	}
-	list_for_each_entry_safe(seb, seb_tmp, &si->free, u.list) {
-		list_del(&seb->u.list);
-		kfree(seb);
-	}
-
-	/* Destroy the volume RB-tree */
-	rb = si->volumes.rb_node;
-	while (rb) {
-		if (rb->rb_left)
-			rb = rb->rb_left;
-		else if (rb->rb_right)
-			rb = rb->rb_right;
-		else {
-			sv = rb_entry(rb, struct ubi_scan_volume, rb);
-
-			rb = rb_parent(rb);
-			if (rb) {
-				if (rb->rb_left == &sv->rb)
-					rb->rb_left = NULL;
-				else
-					rb->rb_right = NULL;
-			}
-
-			destroy_sv(sv);
-		}
-	}
-
-	kfree(si);
-}
-
-#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
-
-/**
- * paranoid_check_si - check the scanning information.
- * @ubi: UBI device description object
- * @si: scanning information
- *
- * This function returns zero if the scanning information is all right, and a
- * negative error code if not or if an error occurred.
- */
-static int paranoid_check_si(struct ubi_device *ubi, struct ubi_scan_info *si)
-{
-	int pnum, err, vols_found = 0;
-	struct rb_node *rb1, *rb2;
-	struct ubi_scan_volume *sv;
-	struct ubi_scan_leb *seb, *last_seb;
-	uint8_t *buf;
-
-	/*
-	 * At first, check that scanning information is OK.
-	 */
-	ubi_rb_for_each_entry(rb1, sv, &si->volumes, rb) {
-		int leb_count = 0;
-
-		cond_resched();
-
-		vols_found += 1;
-
-		if (si->is_empty) {
-			ubi_err("bad is_empty flag");
-			goto bad_sv;
-		}
-
-		if (sv->vol_id < 0 || sv->highest_lnum < 0 ||
-		    sv->leb_count < 0 || sv->vol_type < 0 || sv->used_ebs < 0 ||
-		    sv->data_pad < 0 || sv->last_data_size < 0) {
-			ubi_err("negative values");
-			goto bad_sv;
-		}
-
-		if (sv->vol_id >= UBI_MAX_VOLUMES &&
-		    sv->vol_id < UBI_INTERNAL_VOL_START) {
-			ubi_err("bad vol_id");
-			goto bad_sv;
-		}
-
-		if (sv->vol_id > si->highest_vol_id) {
-			ubi_err("highest_vol_id is %d, but vol_id %d is there",
-				si->highest_vol_id, sv->vol_id);
-			goto out;
-		}
-
-		if (sv->vol_type != UBI_DYNAMIC_VOLUME &&
-		    sv->vol_type != UBI_STATIC_VOLUME) {
-			ubi_err("bad vol_type");
-			goto bad_sv;
-		}
-
-		if (sv->data_pad > ubi->leb_size / 2) {
-			ubi_err("bad data_pad");
-			goto bad_sv;
-		}
-
-		last_seb = NULL;
-		ubi_rb_for_each_entry(rb2, seb, &sv->root, u.rb) {
-			cond_resched();
-
-			last_seb = seb;
-			leb_count += 1;
-
-			if (seb->pnum < 0 || seb->ec < 0) {
-				ubi_err("negative values");
-				goto bad_seb;
-			}
-
-			if (seb->ec < si->min_ec) {
-				ubi_err("bad si->min_ec (%d), %d found",
-					si->min_ec, seb->ec);
-				goto bad_seb;
-			}
-
-			if (seb->ec > si->max_ec) {
-				ubi_err("bad si->max_ec (%d), %d found",
-					si->max_ec, seb->ec);
-				goto bad_seb;
-			}
-
-			if (seb->pnum >= ubi->peb_count) {
-				ubi_err("too high PEB number %d, total PEBs %d",
-					seb->pnum, ubi->peb_count);
-				goto bad_seb;
-			}
-
-			if (sv->vol_type == UBI_STATIC_VOLUME) {
-				if (seb->lnum >= sv->used_ebs) {
-					ubi_err("bad lnum or used_ebs");
-					goto bad_seb;
-				}
-			} else {
-				if (sv->used_ebs != 0) {
-					ubi_err("non-zero used_ebs");
-					goto bad_seb;
-				}
-			}
-
-			if (seb->lnum > sv->highest_lnum) {
-				ubi_err("incorrect highest_lnum or lnum");
-				goto bad_seb;
-			}
-		}
-
-		if (sv->leb_count != leb_count) {
-			ubi_err("bad leb_count, %d objects in the tree",
-				leb_count);
-			goto bad_sv;
-		}
-
-		if (!last_seb)
-			continue;
-
-		seb = last_seb;
-
-		if (seb->lnum != sv->highest_lnum) {
-			ubi_err("bad highest_lnum");
-			goto bad_seb;
-		}
-	}
-
-	if (vols_found != si->vols_found) {
-		ubi_err("bad si->vols_found %d, should be %d",
-			si->vols_found, vols_found);
-		goto out;
-	}
-
-	/* Check that scanning information is correct */
-	ubi_rb_for_each_entry(rb1, sv, &si->volumes, rb) {
-		last_seb = NULL;
-		ubi_rb_for_each_entry(rb2, seb, &sv->root, u.rb) {
-			int vol_type;
-
-			cond_resched();
-
-			last_seb = seb;
-
-			err = ubi_io_read_vid_hdr(ubi, seb->pnum, vidh, 1);
-			if (err && err != UBI_IO_BITFLIPS) {
-				ubi_err("VID header is not OK (%d)", err);
-				if (err > 0)
-					err = -EIO;
-				return err;
-			}
-
-			vol_type = vidh->vol_type == UBI_VID_DYNAMIC ?
-				   UBI_DYNAMIC_VOLUME : UBI_STATIC_VOLUME;
-			if (sv->vol_type != vol_type) {
-				ubi_err("bad vol_type");
-				goto bad_vid_hdr;
-			}
-
-			if (seb->sqnum != be64_to_cpu(vidh->sqnum)) {
-				ubi_err("bad sqnum %llu", seb->sqnum);
-				goto bad_vid_hdr;
-			}
-
-			if (sv->vol_id != be32_to_cpu(vidh->vol_id)) {
-				ubi_err("bad vol_id %d", sv->vol_id);
-				goto bad_vid_hdr;
-			}
-
-			if (sv->compat != vidh->compat) {
-				ubi_err("bad compat %d", vidh->compat);
-				goto bad_vid_hdr;
-			}
-
-			if (seb->lnum != be32_to_cpu(vidh->lnum)) {
-				ubi_err("bad lnum %d", seb->lnum);
-				goto bad_vid_hdr;
-			}
-
-			if (sv->used_ebs != be32_to_cpu(vidh->used_ebs)) {
-				ubi_err("bad used_ebs %d", sv->used_ebs);
-				goto bad_vid_hdr;
-			}
-
-			if (sv->data_pad != be32_to_cpu(vidh->data_pad)) {
-				ubi_err("bad data_pad %d", sv->data_pad);
-				goto bad_vid_hdr;
-			}
-		}
-
-		if (!last_seb)
-			continue;
-
-		if (sv->highest_lnum != be32_to_cpu(vidh->lnum)) {
-			ubi_err("bad highest_lnum %d", sv->highest_lnum);
-			goto bad_vid_hdr;
-		}
-
-		if (sv->last_data_size != be32_to_cpu(vidh->data_size)) {
-			ubi_err("bad last_data_size %d", sv->last_data_size);
-			goto bad_vid_hdr;
-		}
-	}
-
-	/*
-	 * Make sure that all the physical eraseblocks are in one of the lists
-	 * or trees.
-	 */
-	buf = kzalloc(ubi->peb_count, GFP_KERNEL);
-	if (!buf)
-		return -ENOMEM;
-
-	for (pnum = 0; pnum < ubi->peb_count; pnum++) {
-		err = ubi_io_is_bad(ubi, pnum);
-		if (err < 0) {
-			kfree(buf);
-			return err;
-		} else if (err)
-			buf[pnum] = 1;
-	}
-
-	ubi_rb_for_each_entry(rb1, sv, &si->volumes, rb)
-		ubi_rb_for_each_entry(rb2, seb, &sv->root, u.rb)
-			buf[seb->pnum] = 1;
-
-	list_for_each_entry(seb, &si->free, u.list)
-		buf[seb->pnum] = 1;
-
-	list_for_each_entry(seb, &si->corr, u.list)
-		buf[seb->pnum] = 1;
-
-	list_for_each_entry(seb, &si->erase, u.list)
-		buf[seb->pnum] = 1;
-
-	list_for_each_entry(seb, &si->alien, u.list)
-		buf[seb->pnum] = 1;
-
-	err = 0;
-	for (pnum = 0; pnum < ubi->peb_count; pnum++)
-		if (!buf[pnum]) {
-			ubi_err("PEB %d is not referred", pnum);
-			err = 1;
-		}
-
-	kfree(buf);
-	if (err)
-		goto out;
-	return 0;
-
-bad_seb:
-	ubi_err("bad scanning information about LEB %d", seb->lnum);
-	ubi_dbg_dump_seb(seb, 0);
-	ubi_dbg_dump_sv(sv);
-	goto out;
-
-bad_sv:
-	ubi_err("bad scanning information about volume %d", sv->vol_id);
-	ubi_dbg_dump_sv(sv);
-	goto out;
-
-bad_vid_hdr:
-	ubi_err("bad scanning information about volume %d", sv->vol_id);
-	ubi_dbg_dump_sv(sv);
-	ubi_dbg_dump_vid_hdr(vidh);
-
-out:
-	ubi_dbg_dump_stack();
-	return -EINVAL;
-}
-
-#endif /* CONFIG_MTD_UBI_DEBUG_PARANOID */
diff --git a/drivers/mtd/ubi/scan.h b/drivers/mtd/ubi/scan.h
deleted file mode 100644
index ff179ad7ca5..00000000000
--- a/drivers/mtd/ubi/scan.h
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * Copyright (c) International Business Machines Corp., 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Author: Artem Bityutskiy (Битюцкий Артём)
- */
-
-#ifndef __UBI_SCAN_H__
-#define __UBI_SCAN_H__
-
-/* The erase counter value for this physical eraseblock is unknown */
-#define UBI_SCAN_UNKNOWN_EC (-1)
-
-/**
- * struct ubi_scan_leb - scanning information about a physical eraseblock.
- * @ec: erase counter (%UBI_SCAN_UNKNOWN_EC if it is unknown)
- * @pnum: physical eraseblock number
- * @lnum: logical eraseblock number
- * @scrub: if this physical eraseblock needs scrubbing
- * @sqnum: sequence number
- * @u: unions RB-tree or @list links
- * @u.rb: link in the per-volume RB-tree of &struct ubi_scan_leb objects
- * @u.list: link in one of the eraseblock lists
- *
- * One object of this type is allocated for each physical eraseblock during
- * scanning.
- */
-struct ubi_scan_leb {
-	int ec;
-	int pnum;
-	int lnum;
-	int scrub;
-	unsigned long long sqnum;
-	union {
-		struct rb_node rb;
-		struct list_head list;
-	} u;
-};
-
-/**
- * struct ubi_scan_volume - scanning information about a volume.
- * @vol_id: volume ID
- * @highest_lnum: highest logical eraseblock number in this volume
- * @leb_count: number of logical eraseblocks in this volume
- * @vol_type: volume type
- * @used_ebs: number of used logical eraseblocks in this volume (only for
- *            static volumes)
- * @last_data_size: amount of data in the last logical eraseblock of this
- *                  volume (always equivalent to the usable logical eraseblock
- *                  size in case of dynamic volumes)
- * @data_pad: how many bytes at the end of logical eraseblocks of this volume
- *            are not used (due to volume alignment)
- * @compat: compatibility flags of this volume
- * @rb: link in the volume RB-tree
- * @root: root of the RB-tree containing all the eraseblock belonging to this
- *        volume (&struct ubi_scan_leb objects)
- *
- * One object of this type is allocated for each volume during scanning.
- */
-struct ubi_scan_volume {
-	int vol_id;
-	int highest_lnum;
-	int leb_count;
-	int vol_type;
-	int used_ebs;
-	int last_data_size;
-	int data_pad;
-	int compat;
-	struct rb_node rb;
-	struct rb_root root;
-};
-
-/**
- * struct ubi_scan_info - UBI scanning information.
- * @volumes: root of the volume RB-tree
- * @corr: list of corrupted physical eraseblocks
- * @free: list of free physical eraseblocks
- * @erase: list of physical eraseblocks which have to be erased
- * @alien: list of physical eraseblocks which should not be used by UBI (e.g.,
- *         those belonging to "preserve"-compatible internal volumes)
- * @bad_peb_count: count of bad physical eraseblocks
- * @vols_found: number of volumes found during scanning
- * @highest_vol_id: highest volume ID
- * @alien_peb_count: count of physical eraseblocks in the @alien list
- * @is_empty: flag indicating whether the MTD device is empty or not
- * @min_ec: lowest erase counter value
- * @max_ec: highest erase counter value
- * @max_sqnum: highest sequence number value
- * @mean_ec: mean erase counter value
- * @ec_sum: a temporary variable used when calculating @mean_ec
- * @ec_count: a temporary variable used when calculating @mean_ec
- * @corr_count: count of corrupted PEBs
- *
- * This data structure contains the result of scanning and may be used by other
- * UBI sub-systems to build final UBI data structures, further error-recovery
- * and so on.
- */
-struct ubi_scan_info {
-	struct rb_root volumes;
-	struct list_head corr;
-	struct list_head free;
-	struct list_head erase;
-	struct list_head alien;
-	int bad_peb_count;
-	int vols_found;
-	int highest_vol_id;
-	int alien_peb_count;
-	int is_empty;
-	int min_ec;
-	int max_ec;
-	unsigned long long max_sqnum;
-	int mean_ec;
-	uint64_t ec_sum;
-	int ec_count;
-	int corr_count;
-};
-
-struct ubi_device;
-struct ubi_vid_hdr;
-
-/*
- * ubi_scan_move_to_list - move a PEB from the volume tree to a list.
- *
- * @sv: volume scanning information
- * @seb: scanning eraseblock infprmation
- * @list: the list to move to
- */
-static inline void ubi_scan_move_to_list(struct ubi_scan_volume *sv,
-					 struct ubi_scan_leb *seb,
-					 struct list_head *list)
-{
-		rb_erase(&seb->u.rb, &sv->root);
-		list_add_tail(&seb->u.list, list);
-}
-
-int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
-		      int pnum, int ec, const struct ubi_vid_hdr *vid_hdr,
-		      int bitflips);
-struct ubi_scan_volume *ubi_scan_find_sv(const struct ubi_scan_info *si,
-					 int vol_id);
-struct ubi_scan_leb *ubi_scan_find_seb(const struct ubi_scan_volume *sv,
-				       int lnum);
-void ubi_scan_rm_volume(struct ubi_scan_info *si, struct ubi_scan_volume *sv);
-struct ubi_scan_leb *ubi_scan_get_free_peb(struct ubi_device *ubi,
-					   struct ubi_scan_info *si);
-int ubi_scan_erase_peb(struct ubi_device *ubi, const struct ubi_scan_info *si,
-		       int pnum, int ec);
-struct ubi_scan_info *ubi_scan(struct ubi_device *ubi);
-void ubi_scan_destroy_si(struct ubi_scan_info *si);
-
-#endif /* !__UBI_SCAN_H__ */
diff --git a/drivers/mtd/ubi/ubi-media.h b/drivers/mtd/ubi/ubi-media.h
index 503ea9b2730..ac2b24d1783 100644
--- a/drivers/mtd/ubi/ubi-media.h
+++ b/drivers/mtd/ubi/ubi-media.h
@@ -149,10 +149,10 @@ enum {
  * The @image_seq field is used to validate a UBI image that has been prepared
  * for a UBI device. The @image_seq value can be any value, but it must be the
  * same on all eraseblocks. UBI will ensure that all new erase counter headers
- * also contain this value, and will check the value when scanning at start-up.
+ * also contain this value, and will check the value when attaching the flash.
  * One way to make use of @image_seq is to increase its value by one every time
  * an image is flashed over an existing image, then, if the flashing does not
- * complete, UBI will detect the error when scanning.
+ * complete, UBI will detect the error when attaching the media.
  */
 struct ubi_ec_hdr {
 	__be32  magic;
@@ -164,7 +164,7 @@ struct ubi_ec_hdr {
 	__be32  image_seq;
 	__u8    padding2[32];
 	__be32  hdr_crc;
-} __attribute__ ((packed));
+} __packed;
 
 /**
  * struct ubi_vid_hdr - on-flash UBI volume identifier header.
@@ -292,14 +292,14 @@ struct ubi_vid_hdr {
 	__be64  sqnum;
 	__u8    padding3[12];
 	__be32  hdr_crc;
-} __attribute__ ((packed));
+} __packed;
 
 /* Internal UBI volumes count */
 #define UBI_INT_VOL_COUNT 1
 
 /*
- * Starting ID of internal volumes. There is reserved room for 4096 internal
- * volumes.
+ * Starting ID of internal volumes: 0x7fffefff.
+ * There is reserved room for 4096 internal volumes.
  */
 #define UBI_INTERNAL_VOL_START (0x7FFFFFFF - 4096)
 
@@ -373,6 +373,143 @@ struct ubi_vtbl_record {
 	__u8    flags;
 	__u8    padding[23];
 	__be32  crc;
-} __attribute__ ((packed));
+} __packed;
 
+/* UBI fastmap on-flash data structures */
+
+#define UBI_FM_SB_VOLUME_ID	(UBI_LAYOUT_VOLUME_ID + 1)
+#define UBI_FM_DATA_VOLUME_ID	(UBI_LAYOUT_VOLUME_ID + 2)
+
+/* fastmap on-flash data structure format version */
+#define UBI_FM_FMT_VERSION	1
+
+#define UBI_FM_SB_MAGIC		0x7B11D69F
+#define UBI_FM_HDR_MAGIC	0xD4B82EF7
+#define UBI_FM_VHDR_MAGIC	0xFA370ED1
+#define UBI_FM_POOL_MAGIC	0x67AF4D08
+#define UBI_FM_EBA_MAGIC	0xf0c040a8
+
+/* A fastmap supber block can be located between PEB 0 and
+ * UBI_FM_MAX_START */
+#define UBI_FM_MAX_START	64
+
+/* A fastmap can use up to UBI_FM_MAX_BLOCKS PEBs */
+#define UBI_FM_MAX_BLOCKS	32
+
+/* 5% of the total number of PEBs have to be scanned while attaching
+ * from a fastmap.
+ * But the size of this pool is limited to be between UBI_FM_MIN_POOL_SIZE and
+ * UBI_FM_MAX_POOL_SIZE */
+#define UBI_FM_MIN_POOL_SIZE	8
+#define UBI_FM_MAX_POOL_SIZE	256
+
+#define UBI_FM_WL_POOL_SIZE	25
+
+/**
+ * struct ubi_fm_sb - UBI fastmap super block
+ * @magic: fastmap super block magic number (%UBI_FM_SB_MAGIC)
+ * @version: format version of this fastmap
+ * @data_crc: CRC over the fastmap data
+ * @used_blocks: number of PEBs used by this fastmap
+ * @block_loc: an array containing the location of all PEBs of the fastmap
+ * @block_ec: the erase counter of each used PEB
+ * @sqnum: highest sequence number value at the time while taking the fastmap
+ *
+ */
+struct ubi_fm_sb {
+	__be32 magic;
+	__u8 version;
+	__u8 padding1[3];
+	__be32 data_crc;
+	__be32 used_blocks;
+	__be32 block_loc[UBI_FM_MAX_BLOCKS];
+	__be32 block_ec[UBI_FM_MAX_BLOCKS];
+	__be64 sqnum;
+	__u8 padding2[32];
+} __packed;
+
+/**
+ * struct ubi_fm_hdr - header of the fastmap data set
+ * @magic: fastmap header magic number (%UBI_FM_HDR_MAGIC)
+ * @free_peb_count: number of free PEBs known by this fastmap
+ * @used_peb_count: number of used PEBs known by this fastmap
+ * @scrub_peb_count: number of to be scrubbed PEBs known by this fastmap
+ * @bad_peb_count: number of bad PEBs known by this fastmap
+ * @erase_peb_count: number of bad PEBs which have to be erased
+ * @vol_count: number of UBI volumes known by this fastmap
+ */
+struct ubi_fm_hdr {
+	__be32 magic;
+	__be32 free_peb_count;
+	__be32 used_peb_count;
+	__be32 scrub_peb_count;
+	__be32 bad_peb_count;
+	__be32 erase_peb_count;
+	__be32 vol_count;
+	__u8 padding[4];
+} __packed;
+
+/* struct ubi_fm_hdr is followed by two struct ubi_fm_scan_pool */
+
+/**
+ * struct ubi_fm_scan_pool - Fastmap pool PEBs to be scanned while attaching
+ * @magic: pool magic numer (%UBI_FM_POOL_MAGIC)
+ * @size: current pool size
+ * @max_size: maximal pool size
+ * @pebs: an array containing the location of all PEBs in this pool
+ */
+struct ubi_fm_scan_pool {
+	__be32 magic;
+	__be16 size;
+	__be16 max_size;
+	__be32 pebs[UBI_FM_MAX_POOL_SIZE];
+	__be32 padding[4];
+} __packed;
+
+/* ubi_fm_scan_pool is followed by nfree+nused struct ubi_fm_ec records */
+
+/**
+ * struct ubi_fm_ec - stores the erase counter of a PEB
+ * @pnum: PEB number
+ * @ec: ec of this PEB
+ */
+struct ubi_fm_ec {
+	__be32 pnum;
+	__be32 ec;
+} __packed;
+
+/**
+ * struct ubi_fm_volhdr - Fastmap volume header
+ * it identifies the start of an eba table
+ * @magic: Fastmap volume header magic number (%UBI_FM_VHDR_MAGIC)
+ * @vol_id: volume id of the fastmapped volume
+ * @vol_type: type of the fastmapped volume
+ * @data_pad: data_pad value of the fastmapped volume
+ * @used_ebs: number of used LEBs within this volume
+ * @last_eb_bytes: number of bytes used in the last LEB
+ */
+struct ubi_fm_volhdr {
+	__be32 magic;
+	__be32 vol_id;
+	__u8 vol_type;
+	__u8 padding1[3];
+	__be32 data_pad;
+	__be32 used_ebs;
+	__be32 last_eb_bytes;
+	__u8 padding2[8];
+} __packed;
+
+/* struct ubi_fm_volhdr is followed by one struct ubi_fm_eba records */
+
+/**
+ * struct ubi_fm_eba - denotes an association beween a PEB and LEB
+ * @magic: EBA table magic number
+ * @reserved_pebs: number of table entries
+ * @pnum: PEB number of LEB (LEB is the index)
+ */
+struct ubi_fm_eba {
+	__be32 magic;
+	__be32 reserved_pebs;
+	__be32 pnum[0];
+} __packed;
 #endif /* !__UBI_MEDIA_H__ */
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index a637f0283ad..7bf416329c1 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -22,7 +22,6 @@
 #ifndef __UBI_UBI_H__
 #define __UBI_UBI_H__
 
-#include <linux/init.h>
 #include <linux/types.h>
 #include <linux/list.h>
 #include <linux/rbtree.h>
@@ -40,10 +39,9 @@
 #include <linux/notifier.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/ubi.h>
+#include <asm/pgtable.h>
 
 #include "ubi-media.h"
-#include "scan.h"
-#include "debug.h"
 
 /* Maximum number of supported UBI devices */
 #define UBI_MAX_DEVICES 32
@@ -52,21 +50,21 @@
 #define UBI_NAME_STR "ubi"
 
 /* Normal UBI messages */
-#define ubi_msg(fmt, ...) printk(KERN_NOTICE "UBI: " fmt "\n", ##__VA_ARGS__)
+#define ubi_msg(fmt, ...) pr_notice("UBI: " fmt "\n", ##__VA_ARGS__)
 /* UBI warning messages */
-#define ubi_warn(fmt, ...) printk(KERN_WARNING "UBI warning: %s: " fmt "\n", \
-				  __func__, ##__VA_ARGS__)
+#define ubi_warn(fmt, ...) pr_warn("UBI warning: %s: " fmt "\n",  \
+				   __func__, ##__VA_ARGS__)
 /* UBI error messages */
-#define ubi_err(fmt, ...) printk(KERN_ERR "UBI error: %s: " fmt "\n", \
+#define ubi_err(fmt, ...) pr_err("UBI error: %s: " fmt "\n",      \
 				 __func__, ##__VA_ARGS__)
 
-/* Lowest number PEBs reserved for bad PEB handling */
-#define MIN_RESEVED_PEBS 2
-
 /* Background thread name pattern */
 #define UBI_BGT_NAME_PATTERN "ubi_bgt%dd"
 
-/* This marker in the EBA table means that the LEB is um-mapped */
+/*
+ * This marker in the EBA table means that the LEB is um-mapped.
+ * NOTE! It has to have the same value as %UBI_ALL.
+ */
 #define UBI_LEB_UNMAPPED -1
 
 /*
@@ -82,24 +80,39 @@
  */
 #define UBI_PROT_QUEUE_LEN 10
 
+/* The volume ID/LEB number/erase counter is unknown */
+#define UBI_UNKNOWN -1
+
+/*
+ * The UBI debugfs directory name pattern and maximum name length (3 for "ubi"
+ * + 2 for the number plus 1 for the trailing zero byte.
+ */
+#define UBI_DFS_DIR_NAME "ubi%d"
+#define UBI_DFS_DIR_LEN  (3 + 2 + 1)
+
 /*
  * Error codes returned by the I/O sub-system.
  *
- * UBI_IO_PEB_EMPTY: the physical eraseblock is empty, i.e. it contains only
- *                   %0xFF bytes
- * UBI_IO_PEB_FREE: the physical eraseblock is free, i.e. it contains only a
- *                  valid erase counter header, and the rest are %0xFF bytes
- * UBI_IO_BAD_EC_HDR: the erase counter header is corrupted (bad magic or CRC)
- * UBI_IO_BAD_VID_HDR: the volume identifier header is corrupted (bad magic or
- *                     CRC)
+ * UBI_IO_FF: the read region of flash contains only 0xFFs
+ * UBI_IO_FF_BITFLIPS: the same as %UBI_IO_FF, but also also there was a data
+ *                     integrity error reported by the MTD driver
+ *                     (uncorrectable ECC error in case of NAND)
+ * UBI_IO_BAD_HDR: the EC or VID header is corrupted (bad magic or CRC)
+ * UBI_IO_BAD_HDR_EBADMSG: the same as %UBI_IO_BAD_HDR, but also there was a
+ *                         data integrity error reported by the MTD driver
+ *                         (uncorrectable ECC error in case of NAND)
  * UBI_IO_BITFLIPS: bit-flips were detected and corrected
+ *
+ * Note, it is probably better to have bit-flip and ebadmsg as flags which can
+ * be or'ed with other error code. But this is a big change because there are
+ * may callers, so it does not worth the risk of introducing a bug
  */
 enum {
-	UBI_IO_PEB_EMPTY = 1,
-	UBI_IO_PEB_FREE,
-	UBI_IO_BAD_EC_HDR,
-	UBI_IO_BAD_VID_HDR,
-	UBI_IO_BITFLIPS
+	UBI_IO_FF = 1,
+	UBI_IO_FF_BITFLIPS,
+	UBI_IO_BAD_HDR,
+	UBI_IO_BAD_HDR_EBADMSG,
+	UBI_IO_BITFLIPS,
 };
 
 /*
@@ -113,15 +126,28 @@ enum {
  *                     PEB
  * MOVE_TARGET_WR_ERR: canceled because there was a write error to the target
  *                     PEB
- * MOVE_CANCEL_BITFLIPS: canceled because a bit-flip was detected in the
+ * MOVE_TARGET_BITFLIPS: canceled because a bit-flip was detected in the
  *                       target PEB
+ * MOVE_RETRY: retry scrubbing the PEB
  */
 enum {
 	MOVE_CANCEL_RACE = 1,
 	MOVE_SOURCE_RD_ERR,
 	MOVE_TARGET_RD_ERR,
 	MOVE_TARGET_WR_ERR,
-	MOVE_CANCEL_BITFLIPS,
+	MOVE_TARGET_BITFLIPS,
+	MOVE_RETRY,
+};
+
+/*
+ * Return codes of the fastmap sub-system
+ *
+ * UBI_NO_FASTMAP: No fastmap super block was found
+ * UBI_BAD_FASTMAP: A fastmap was found but it's unusable
+ */
+enum {
+	UBI_NO_FASTMAP = 1,
+	UBI_BAD_FASTMAP,
 };
 
 /**
@@ -190,6 +216,41 @@ struct ubi_rename_entry {
 struct ubi_volume_desc;
 
 /**
+ * struct ubi_fastmap_layout - in-memory fastmap data structure.
+ * @e: PEBs used by the current fastmap
+ * @to_be_tortured: if non-zero tortured this PEB
+ * @used_blocks: number of used PEBs
+ * @max_pool_size: maximal size of the user pool
+ * @max_wl_pool_size: maximal size of the pool used by the WL sub-system
+ */
+struct ubi_fastmap_layout {
+	struct ubi_wl_entry *e[UBI_FM_MAX_BLOCKS];
+	int to_be_tortured[UBI_FM_MAX_BLOCKS];
+	int used_blocks;
+	int max_pool_size;
+	int max_wl_pool_size;
+};
+
+/**
+ * struct ubi_fm_pool - in-memory fastmap pool
+ * @pebs: PEBs in this pool
+ * @used: number of used PEBs
+ * @size: total number of PEBs in this pool
+ * @max_size: maximal size of the pool
+ *
+ * A pool gets filled with up to max_size.
+ * If all PEBs within the pool are used a new fastmap will be written
+ * to the flash and the pool gets refilled with empty PEBs.
+ *
+ */
+struct ubi_fm_pool {
+	int pebs[UBI_FM_MAX_POOL_SIZE];
+	int used;
+	int size;
+	int max_size;
+};
+
+/**
  * struct ubi_volume - UBI volume description data structure.
  * @dev: device object to make use of the the Linux device model
  * @cdev: character device object to create character device
@@ -215,8 +276,6 @@ struct ubi_volume_desc;
  * @upd_ebs: how many eraseblocks are expected to be updated
  * @ch_lnum: LEB number which is being changing by the atomic LEB change
  *           operation
- * @ch_dtype: data persistency type which is being changing by the atomic LEB
- *            change operation
  * @upd_bytes: how many bytes are expected to be received for volume update or
  *             atomic LEB change
  * @upd_received: how many bytes were already received for volume update or
@@ -263,7 +322,6 @@ struct ubi_volume {
 
 	int upd_ebs;
 	int ch_lnum;
-	int ch_dtype;
 	long long upd_bytes;
 	long long upd_received;
 	void *upd_buf;
@@ -290,6 +348,37 @@ struct ubi_volume_desc {
 struct ubi_wl_entry;
 
 /**
+ * struct ubi_debug_info - debugging information for an UBI device.
+ *
+ * @chk_gen: if UBI general extra checks are enabled
+ * @chk_io: if UBI I/O extra checks are enabled
+ * @disable_bgt: disable the background task for testing purposes
+ * @emulate_bitflips: emulate bit-flips for testing purposes
+ * @emulate_io_failures: emulate write/erase failures for testing purposes
+ * @dfs_dir_name: name of debugfs directory containing files of this UBI device
+ * @dfs_dir: direntry object of the UBI device debugfs directory
+ * @dfs_chk_gen: debugfs knob to enable UBI general extra checks
+ * @dfs_chk_io: debugfs knob to enable UBI I/O extra checks
+ * @dfs_disable_bgt: debugfs knob to disable the background task
+ * @dfs_emulate_bitflips: debugfs knob to emulate bit-flips
+ * @dfs_emulate_io_failures: debugfs knob to emulate write/erase failures
+ */
+struct ubi_debug_info {
+	unsigned int chk_gen:1;
+	unsigned int chk_io:1;
+	unsigned int disable_bgt:1;
+	unsigned int emulate_bitflips:1;
+	unsigned int emulate_io_failures:1;
+	char dfs_dir_name[UBI_DFS_DIR_LEN + 1];
+	struct dentry *dfs_dir;
+	struct dentry *dfs_chk_gen;
+	struct dentry *dfs_chk_io;
+	struct dentry *dfs_disable_bgt;
+	struct dentry *dfs_emulate_bitflips;
+	struct dentry *dfs_emulate_io_failures;
+};
+
+/**
  * struct ubi_device - UBI device description structure
  * @dev: UBI device object to use the the Linux device model
  * @cdev: character device object to create character device
@@ -327,16 +416,28 @@ struct ubi_wl_entry;
  * @ltree: the lock tree
  * @alc_mutex: serializes "atomic LEB change" operations
  *
+ * @fm_disabled: non-zero if fastmap is disabled (default)
+ * @fm: in-memory data structure of the currently used fastmap
+ * @fm_pool: in-memory data structure of the fastmap pool
+ * @fm_wl_pool: in-memory data structure of the fastmap pool used by the WL
+ *		sub-system
+ * @fm_mutex: serializes ubi_update_fastmap() and protects @fm_buf
+ * @fm_buf: vmalloc()'d buffer which holds the raw fastmap
+ * @fm_size: fastmap size in bytes
+ * @fm_sem: allows ubi_update_fastmap() to block EBA table changes
+ * @fm_work: fastmap work queue
+ *
  * @used: RB-tree of used physical eraseblocks
  * @erroneous: RB-tree of erroneous used physical eraseblocks
  * @free: RB-tree of free physical eraseblocks
+ * @free_count: Contains the number of elements in @free
  * @scrub: RB-tree of physical eraseblocks which need scrubbing
  * @pq: protection queue (contain physical eraseblocks which are temporarily
  *      protected from the wear-leveling worker)
  * @pq_head: protection queue head
  * @wl_lock: protects the @used, @free, @pq, @pq_head, @lookuptbl, @move_from,
- * 	     @move_to, @move_to_put @erase_pending, @wl_scheduled, @works,
- * 	     @erroneous, and @erroneous_peb_count fields
+ *	     @move_to, @move_to_put @erase_pending, @wl_scheduled, @works,
+ *	     @erroneous, and @erroneous_peb_count fields
  * @move_mutex: serializes eraseblock moves
  * @work_sem: synchronizes the WL worker with use tasks
  * @wl_scheduled: non-zero if the wear-leveling was scheduled
@@ -354,8 +455,11 @@ struct ubi_wl_entry;
  * @flash_size: underlying MTD device size (in bytes)
  * @peb_count: count of physical eraseblocks on the MTD device
  * @peb_size: physical eraseblock size
+ * @bad_peb_limit: top limit of expected bad physical eraseblocks
  * @bad_peb_count: count of bad physical eraseblocks
  * @good_peb_count: count of good physical eraseblocks
+ * @corr_peb_count: count of corrupted physical eraseblocks (preserved and not
+ *                  used by UBI)
  * @erroneous_peb_count: count of erroneous physical eraseblocks in @erroneous
  * @max_erroneous: maximum allowed amount of erroneous physical eraseblocks
  * @min_io_size: minimal input/output unit size of the underlying MTD device
@@ -374,14 +478,15 @@ struct ubi_wl_entry;
  * @bad_allowed: whether the MTD device admits of bad physical eraseblocks or
  *               not
  * @nor_flash: non-zero if working on top of NOR flash
+ * @max_write_size: maximum amount of bytes the underlying flash can write at a
+ *                  time (MTD write buffer size)
  * @mtd: MTD device descriptor
  *
- * @peb_buf1: a buffer of PEB size used for different purposes
- * @peb_buf2: another buffer of PEB size used for different purposes
- * @buf_mutex: protects @peb_buf1 and @peb_buf2
+ * @peb_buf: a buffer of PEB size used for different purposes
+ * @buf_mutex: protects @peb_buf
  * @ckvol_mutex: serializes static volume checking when opening
- * @dbg_peb_buf: buffer of PEB size used for debugging
- * @dbg_buf_mutex: protects @dbg_peb_buf
+ *
+ * @dbg: debugging information for this UBI device
  */
 struct ubi_device {
 	struct cdev cdev;
@@ -398,6 +503,7 @@ struct ubi_device {
 	int avail_pebs;
 	int beb_rsvd_pebs;
 	int beb_rsvd_level;
+	int bad_peb_limit;
 
 	int autoresize_vol_id;
 	int vtbl_slots;
@@ -415,10 +521,22 @@ struct ubi_device {
 	struct rb_root ltree;
 	struct mutex alc_mutex;
 
+	/* Fastmap stuff */
+	int fm_disabled;
+	struct ubi_fastmap_layout *fm;
+	struct ubi_fm_pool fm_pool;
+	struct ubi_fm_pool fm_wl_pool;
+	struct rw_semaphore fm_sem;
+	struct mutex fm_mutex;
+	void *fm_buf;
+	size_t fm_size;
+	struct work_struct fm_work;
+
 	/* Wear-leveling sub-system's stuff */
 	struct rb_root used;
 	struct rb_root erroneous;
 	struct rb_root free;
+	int free_count;
 	struct rb_root scrub;
 	struct list_head pq[UBI_PROT_QUEUE_LEN];
 	int pq_head;
@@ -442,6 +560,7 @@ struct ubi_device {
 	int peb_size;
 	int bad_peb_count;
 	int good_peb_count;
+	int corr_peb_count;
 	int erroneous_peb_count;
 	int max_erroneous;
 	int min_io_size;
@@ -456,18 +575,162 @@ struct ubi_device {
 	int vid_hdr_shift;
 	unsigned int bad_allowed:1;
 	unsigned int nor_flash:1;
+	int max_write_size;
 	struct mtd_info *mtd;
 
-	void *peb_buf1;
-	void *peb_buf2;
+	void *peb_buf;
 	struct mutex buf_mutex;
 	struct mutex ckvol_mutex;
-#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
-	void *dbg_peb_buf;
-	struct mutex dbg_buf_mutex;
-#endif
+
+	struct ubi_debug_info dbg;
+};
+
+/**
+ * struct ubi_ainf_peb - attach information about a physical eraseblock.
+ * @ec: erase counter (%UBI_UNKNOWN if it is unknown)
+ * @pnum: physical eraseblock number
+ * @vol_id: ID of the volume this LEB belongs to
+ * @lnum: logical eraseblock number
+ * @scrub: if this physical eraseblock needs scrubbing
+ * @copy_flag: this LEB is a copy (@copy_flag is set in VID header of this LEB)
+ * @sqnum: sequence number
+ * @u: unions RB-tree or @list links
+ * @u.rb: link in the per-volume RB-tree of &struct ubi_ainf_peb objects
+ * @u.list: link in one of the eraseblock lists
+ *
+ * One object of this type is allocated for each physical eraseblock when
+ * attaching an MTD device. Note, if this PEB does not belong to any LEB /
+ * volume, the @vol_id and @lnum fields are initialized to %UBI_UNKNOWN.
+ */
+struct ubi_ainf_peb {
+	int ec;
+	int pnum;
+	int vol_id;
+	int lnum;
+	unsigned int scrub:1;
+	unsigned int copy_flag:1;
+	unsigned long long sqnum;
+	union {
+		struct rb_node rb;
+		struct list_head list;
+	} u;
+};
+
+/**
+ * struct ubi_ainf_volume - attaching information about a volume.
+ * @vol_id: volume ID
+ * @highest_lnum: highest logical eraseblock number in this volume
+ * @leb_count: number of logical eraseblocks in this volume
+ * @vol_type: volume type
+ * @used_ebs: number of used logical eraseblocks in this volume (only for
+ *            static volumes)
+ * @last_data_size: amount of data in the last logical eraseblock of this
+ *                  volume (always equivalent to the usable logical eraseblock
+ *                  size in case of dynamic volumes)
+ * @data_pad: how many bytes at the end of logical eraseblocks of this volume
+ *            are not used (due to volume alignment)
+ * @compat: compatibility flags of this volume
+ * @rb: link in the volume RB-tree
+ * @root: root of the RB-tree containing all the eraseblock belonging to this
+ *        volume (&struct ubi_ainf_peb objects)
+ *
+ * One object of this type is allocated for each volume when attaching an MTD
+ * device.
+ */
+struct ubi_ainf_volume {
+	int vol_id;
+	int highest_lnum;
+	int leb_count;
+	int vol_type;
+	int used_ebs;
+	int last_data_size;
+	int data_pad;
+	int compat;
+	struct rb_node rb;
+	struct rb_root root;
+};
+
+/**
+ * struct ubi_attach_info - MTD device attaching information.
+ * @volumes: root of the volume RB-tree
+ * @corr: list of corrupted physical eraseblocks
+ * @free: list of free physical eraseblocks
+ * @erase: list of physical eraseblocks which have to be erased
+ * @alien: list of physical eraseblocks which should not be used by UBI (e.g.,
+ *         those belonging to "preserve"-compatible internal volumes)
+ * @corr_peb_count: count of PEBs in the @corr list
+ * @empty_peb_count: count of PEBs which are presumably empty (contain only
+ *                   0xFF bytes)
+ * @alien_peb_count: count of PEBs in the @alien list
+ * @bad_peb_count: count of bad physical eraseblocks
+ * @maybe_bad_peb_count: count of bad physical eraseblocks which are not marked
+ *                       as bad yet, but which look like bad
+ * @vols_found: number of volumes found
+ * @highest_vol_id: highest volume ID
+ * @is_empty: flag indicating whether the MTD device is empty or not
+ * @min_ec: lowest erase counter value
+ * @max_ec: highest erase counter value
+ * @max_sqnum: highest sequence number value
+ * @mean_ec: mean erase counter value
+ * @ec_sum: a temporary variable used when calculating @mean_ec
+ * @ec_count: a temporary variable used when calculating @mean_ec
+ * @aeb_slab_cache: slab cache for &struct ubi_ainf_peb objects
+ *
+ * This data structure contains the result of attaching an MTD device and may
+ * be used by other UBI sub-systems to build final UBI data structures, further
+ * error-recovery and so on.
+ */
+struct ubi_attach_info {
+	struct rb_root volumes;
+	struct list_head corr;
+	struct list_head free;
+	struct list_head erase;
+	struct list_head alien;
+	int corr_peb_count;
+	int empty_peb_count;
+	int alien_peb_count;
+	int bad_peb_count;
+	int maybe_bad_peb_count;
+	int vols_found;
+	int highest_vol_id;
+	int is_empty;
+	int min_ec;
+	int max_ec;
+	unsigned long long max_sqnum;
+	int mean_ec;
+	uint64_t ec_sum;
+	int ec_count;
+	struct kmem_cache *aeb_slab_cache;
 };
 
+/**
+ * struct ubi_work - UBI work description data structure.
+ * @list: a link in the list of pending works
+ * @func: worker function
+ * @e: physical eraseblock to erase
+ * @vol_id: the volume ID on which this erasure is being performed
+ * @lnum: the logical eraseblock number
+ * @torture: if the physical eraseblock has to be tortured
+ * @anchor: produce a anchor PEB to by used by fastmap
+ *
+ * The @func pointer points to the worker function. If the @cancel argument is
+ * not zero, the worker has to free the resources and exit immediately. The
+ * worker has to return zero in case of success and a negative error code in
+ * case of failure.
+ */
+struct ubi_work {
+	struct list_head list;
+	int (*func)(struct ubi_device *ubi, struct ubi_work *wrk, int cancel);
+	/* The below fields are only relevant to erasure works */
+	struct ubi_wl_entry *e;
+	int vol_id;
+	int lnum;
+	int torture;
+	int anchor;
+};
+
+#include "debug.h"
+
 extern struct kmem_cache *ubi_wl_entry_slab;
 extern const struct file_operations ubi_ctrl_cdev_operations;
 extern const struct file_operations ubi_cdev_operations;
@@ -476,12 +739,23 @@ extern struct class *ubi_class;
 extern struct mutex ubi_devices_mutex;
 extern struct blocking_notifier_head ubi_notifiers;
 
+/* attach.c */
+int ubi_add_to_av(struct ubi_device *ubi, struct ubi_attach_info *ai, int pnum,
+		  int ec, const struct ubi_vid_hdr *vid_hdr, int bitflips);
+struct ubi_ainf_volume *ubi_find_av(const struct ubi_attach_info *ai,
+				    int vol_id);
+void ubi_remove_av(struct ubi_attach_info *ai, struct ubi_ainf_volume *av);
+struct ubi_ainf_peb *ubi_early_get_peb(struct ubi_device *ubi,
+				       struct ubi_attach_info *ai);
+int ubi_attach(struct ubi_device *ubi, int force_scan);
+void ubi_destroy_ai(struct ubi_attach_info *ai);
+
 /* vtbl.c */
 int ubi_change_vtbl_record(struct ubi_device *ubi, int idx,
 			   struct ubi_vtbl_record *vtbl_rec);
 int ubi_vtbl_rename_volumes(struct ubi_device *ubi,
 			    struct list_head *rename_list);
-int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_scan_info *si);
+int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_attach_info *ai);
 
 /* vmt.c */
 int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req);
@@ -505,7 +779,9 @@ int ubi_more_leb_change_data(struct ubi_device *ubi, struct ubi_volume *vol,
 int ubi_calc_data_len(const struct ubi_device *ubi, const void *buf,
 		      int length);
 int ubi_check_volume(struct ubi_device *ubi, int vol_id);
+void ubi_update_reserved(struct ubi_device *ubi);
 void ubi_calculate_reserved(struct ubi_device *ubi);
+int ubi_check_pattern(const void *buf, uint8_t patt, int size);
 
 /* eba.c */
 int ubi_eba_unmap_leb(struct ubi_device *ubi, struct ubi_volume *vol,
@@ -513,24 +789,33 @@ int ubi_eba_unmap_leb(struct ubi_device *ubi, struct ubi_volume *vol,
 int ubi_eba_read_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
 		     void *buf, int offset, int len, int check);
 int ubi_eba_write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
-		      const void *buf, int offset, int len, int dtype);
+		      const void *buf, int offset, int len);
 int ubi_eba_write_leb_st(struct ubi_device *ubi, struct ubi_volume *vol,
-			 int lnum, const void *buf, int len, int dtype,
-			 int used_ebs);
+			 int lnum, const void *buf, int len, int used_ebs);
 int ubi_eba_atomic_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
-			      int lnum, const void *buf, int len, int dtype);
+			      int lnum, const void *buf, int len);
 int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
 		     struct ubi_vid_hdr *vid_hdr);
-int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si);
+int ubi_eba_init(struct ubi_device *ubi, struct ubi_attach_info *ai);
+unsigned long long ubi_next_sqnum(struct ubi_device *ubi);
+int self_check_eba(struct ubi_device *ubi, struct ubi_attach_info *ai_fastmap,
+		   struct ubi_attach_info *ai_scan);
 
 /* wl.c */
-int ubi_wl_get_peb(struct ubi_device *ubi, int dtype);
-int ubi_wl_put_peb(struct ubi_device *ubi, int pnum, int torture);
-int ubi_wl_flush(struct ubi_device *ubi);
+int ubi_wl_get_peb(struct ubi_device *ubi);
+int ubi_wl_put_peb(struct ubi_device *ubi, int vol_id, int lnum,
+		   int pnum, int torture);
+int ubi_wl_flush(struct ubi_device *ubi, int vol_id, int lnum);
 int ubi_wl_scrub_peb(struct ubi_device *ubi, int pnum);
-int ubi_wl_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si);
+int ubi_wl_init(struct ubi_device *ubi, struct ubi_attach_info *ai);
 void ubi_wl_close(struct ubi_device *ubi);
 int ubi_thread(void *u);
+struct ubi_wl_entry *ubi_wl_get_fm_peb(struct ubi_device *ubi, int anchor);
+int ubi_wl_put_fm_peb(struct ubi_device *ubi, struct ubi_wl_entry *used_e,
+		      int lnum, int torture);
+int ubi_is_erase_work(struct ubi_work *wrk);
+void ubi_refill_pools(struct ubi_device *ubi);
+int ubi_ensure_anchor_pebs(struct ubi_device *ubi);
 
 /* io.c */
 int ubi_io_read(const struct ubi_device *ubi, void *buf, int pnum, int offset,
@@ -550,7 +835,8 @@ int ubi_io_write_vid_hdr(struct ubi_device *ubi, int pnum,
 			 struct ubi_vid_hdr *vid_hdr);
 
 /* build.c */
-int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset);
+int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num,
+		       int vid_hdr_offset, int max_beb_per1024);
 int ubi_detach_mtd_dev(int ubi_num, int anyway);
 struct ubi_device *ubi_get_device(int ubi_num);
 void ubi_put_device(struct ubi_device *ubi);
@@ -561,11 +847,41 @@ int ubi_volume_notify(struct ubi_device *ubi, struct ubi_volume *vol,
 int ubi_notify_all(struct ubi_device *ubi, int ntype,
 		   struct notifier_block *nb);
 int ubi_enumerate_volumes(struct notifier_block *nb);
+void ubi_free_internal_volumes(struct ubi_device *ubi);
 
 /* kapi.c */
 void ubi_do_get_device_info(struct ubi_device *ubi, struct ubi_device_info *di);
 void ubi_do_get_volume_info(struct ubi_device *ubi, struct ubi_volume *vol,
 			    struct ubi_volume_info *vi);
+/* scan.c */
+int ubi_compare_lebs(struct ubi_device *ubi, const struct ubi_ainf_peb *aeb,
+		      int pnum, const struct ubi_vid_hdr *vid_hdr);
+
+/* fastmap.c */
+size_t ubi_calc_fm_size(struct ubi_device *ubi);
+int ubi_update_fastmap(struct ubi_device *ubi);
+int ubi_scan_fastmap(struct ubi_device *ubi, struct ubi_attach_info *ai,
+		     int fm_anchor);
+
+/* block.c */
+#ifdef CONFIG_MTD_UBI_BLOCK
+int ubiblock_init(void);
+void ubiblock_exit(void);
+int ubiblock_create(struct ubi_volume_info *vi);
+int ubiblock_remove(struct ubi_volume_info *vi);
+#else
+static inline int ubiblock_init(void) { return 0; }
+static inline void ubiblock_exit(void) {}
+static inline int ubiblock_create(struct ubi_volume_info *vi)
+{
+	return -ENOSYS;
+}
+static inline int ubiblock_remove(struct ubi_volume_info *vi)
+{
+	return -ENOSYS;
+}
+#endif
+
 
 /*
  * ubi_rb_for_each_entry - walk an RB-tree.
@@ -581,6 +897,21 @@ void ubi_do_get_volume_info(struct ubi_device *ubi, struct ubi_volume *vol,
 	     rb = rb_next(rb),                                               \
 	     pos = (rb ? container_of(rb, typeof(*pos), member) : NULL))
 
+/*
+ * ubi_move_aeb_to_list - move a PEB from the volume tree to a list.
+ *
+ * @av: volume attaching information
+ * @aeb: attaching eraseblock information
+ * @list: the list to move to
+ */
+static inline void ubi_move_aeb_to_list(struct ubi_ainf_volume *av,
+					 struct ubi_ainf_peb *aeb,
+					 struct list_head *list)
+{
+		rb_erase(&aeb->u.rb, &av->root);
+		list_add_tail(&aeb->u.list, list);
+}
+
 /**
  * ubi_zalloc_vid_hdr - allocate a volume identifier header object.
  * @ubi: UBI device description object
@@ -655,6 +986,7 @@ static inline void ubi_ro_mode(struct ubi_device *ubi)
 	if (!ubi->ro_mode) {
 		ubi->ro_mode = 1;
 		ubi_warn("switch to read-only mode");
+		dump_stack();
 	}
 }
 
diff --git a/drivers/mtd/ubi/upd.c b/drivers/mtd/ubi/upd.c
index 425bf5a3edd..ec2c2dc1c1c 100644
--- a/drivers/mtd/ubi/upd.c
+++ b/drivers/mtd/ubi/upd.c
@@ -64,8 +64,7 @@ static int set_update_marker(struct ubi_device *ubi, struct ubi_volume *vol)
 		return 0;
 	}
 
-	memcpy(&vtbl_rec, &ubi->vtbl[vol->vol_id],
-	       sizeof(struct ubi_vtbl_record));
+	vtbl_rec = ubi->vtbl[vol->vol_id];
 	vtbl_rec.upd_marker = 1;
 
 	mutex_lock(&ubi->device_mutex);
@@ -93,8 +92,7 @@ static int clear_update_marker(struct ubi_device *ubi, struct ubi_volume *vol,
 
 	dbg_gen("clear update marker for volume %d", vol->vol_id);
 
-	memcpy(&vtbl_rec, &ubi->vtbl[vol->vol_id],
-	       sizeof(struct ubi_vtbl_record));
+	vtbl_rec = ubi->vtbl[vol->vol_id];
 	ubi_assert(vol->upd_marker && vtbl_rec.upd_marker);
 	vtbl_rec.upd_marker = 0;
 
@@ -147,7 +145,7 @@ int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol,
 	}
 
 	if (bytes == 0) {
-		err = ubi_wl_flush(ubi);
+		err = ubi_wl_flush(ubi, UBI_ALL, UBI_ALL);
 		if (err)
 			return err;
 
@@ -186,14 +184,12 @@ int ubi_start_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
 	dbg_gen("start changing LEB %d:%d, %u bytes",
 		vol->vol_id, req->lnum, req->bytes);
 	if (req->bytes == 0)
-		return ubi_eba_atomic_leb_change(ubi, vol, req->lnum, NULL, 0,
-						 req->dtype);
+		return ubi_eba_atomic_leb_change(ubi, vol, req->lnum, NULL, 0);
 
 	vol->upd_bytes = req->bytes;
 	vol->upd_received = 0;
 	vol->changing_leb = 1;
 	vol->ch_lnum = req->lnum;
-	vol->ch_dtype = req->dtype;
 
 	vol->upd_buf = vmalloc(req->bytes);
 	if (!vol->upd_buf)
@@ -246,8 +242,7 @@ static int write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
 			return 0;
 		}
 
-		err = ubi_eba_write_leb(ubi, vol, lnum, buf, 0, len,
-					UBI_UNKNOWN);
+		err = ubi_eba_write_leb(ubi, vol, lnum, buf, 0, len);
 	} else {
 		/*
 		 * When writing static volume, and this is the last logical
@@ -259,8 +254,7 @@ static int write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
 		 * contain zeros, not random trash.
 		 */
 		memset(buf + len, 0, vol->usable_leb_size - len);
-		err = ubi_eba_write_leb_st(ubi, vol, lnum, buf, len,
-					   UBI_UNKNOWN, used_ebs);
+		err = ubi_eba_write_leb_st(ubi, vol, lnum, buf, len, used_ebs);
 	}
 
 	return err;
@@ -365,7 +359,7 @@ int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol,
 
 	ubi_assert(vol->upd_received <= vol->upd_bytes);
 	if (vol->upd_received == vol->upd_bytes) {
-		err = ubi_wl_flush(ubi);
+		err = ubi_wl_flush(ubi, UBI_ALL, UBI_ALL);
 		if (err)
 			return err;
 		/* The update is finished, clear the update marker */
@@ -421,7 +415,7 @@ int ubi_more_leb_change_data(struct ubi_device *ubi, struct ubi_volume *vol,
 		       len - vol->upd_bytes);
 		len = ubi_calc_data_len(ubi, vol->upd_buf, len);
 		err = ubi_eba_atomic_leb_change(ubi, vol, vol->ch_lnum,
-						vol->upd_buf, len, UBI_UNKNOWN);
+						vol->upd_buf, len);
 		if (err)
 			return err;
 	}
diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c
index e42afab9a9f..8330703c098 100644
--- a/drivers/mtd/ubi/vmt.c
+++ b/drivers/mtd/ubi/vmt.c
@@ -26,13 +26,10 @@
 #include <linux/err.h>
 #include <linux/math64.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include "ubi.h"
 
-#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
-static int paranoid_check_volumes(struct ubi_device *ubi);
-#else
-#define paranoid_check_volumes(ubi) 0
-#endif
+static int self_check_volumes(struct ubi_device *ubi);
 
 static ssize_t vol_attribute_show(struct device *dev,
 				  struct device_attribute *attr, char *buf);
@@ -226,7 +223,7 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 			}
 
 		if (vol_id == UBI_VOL_NUM_AUTO) {
-			dbg_err("out of volume IDs");
+			ubi_err("out of volume IDs");
 			err = -ENFILE;
 			goto out_unlock;
 		}
@@ -240,7 +237,7 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 	/* Ensure that this volume does not exist */
 	err = -EEXIST;
 	if (ubi->volumes[vol_id]) {
-		dbg_err("volume %d already exists", vol_id);
+		ubi_err("volume %d already exists", vol_id);
 		goto out_unlock;
 	}
 
@@ -249,7 +246,7 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 		if (ubi->volumes[i] &&
 		    ubi->volumes[i]->name_len == req->name_len &&
 		    !strcmp(ubi->volumes[i]->name, req->name)) {
-			dbg_err("volume \"%s\" exists (ID %d)", req->name, i);
+			ubi_err("volume \"%s\" exists (ID %d)", req->name, i);
 			goto out_unlock;
 		}
 
@@ -260,7 +257,10 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 
 	/* Reserve physical eraseblocks */
 	if (vol->reserved_pebs > ubi->avail_pebs) {
-		dbg_err("not enough PEBs, only %d available", ubi->avail_pebs);
+		ubi_err("not enough PEBs, only %d available", ubi->avail_pebs);
+		if (ubi->corr_peb_count)
+			ubi_err("%d PEBs are corrupted and not used",
+				ubi->corr_peb_count);
 		err = -ENOSPC;
 		goto out_unlock;
 	}
@@ -280,7 +280,7 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 	 * Finish all pending erases because there may be some LEBs belonging
 	 * to the same volume ID.
 	 */
-	err = ubi_wl_flush(ubi);
+	err = ubi_wl_flush(ubi, vol_id, UBI_ALL);
 	if (err)
 		goto out_acc;
 
@@ -356,8 +356,7 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 	spin_unlock(&ubi->volumes_lock);
 
 	ubi_volume_notify(ubi, vol, UBI_VOLUME_ADDED);
-	if (paranoid_check_volumes(ubi))
-		dbg_err("check failed while creating volume %d", vol_id);
+	self_check_volumes(ubi);
 	return err;
 
 out_sysfs:
@@ -444,21 +443,13 @@ int ubi_remove_volume(struct ubi_volume_desc *desc, int no_vtbl)
 	spin_lock(&ubi->volumes_lock);
 	ubi->rsvd_pebs -= reserved_pebs;
 	ubi->avail_pebs += reserved_pebs;
-	i = ubi->beb_rsvd_level - ubi->beb_rsvd_pebs;
-	if (i > 0) {
-		i = ubi->avail_pebs >= i ? i : ubi->avail_pebs;
-		ubi->avail_pebs -= i;
-		ubi->rsvd_pebs += i;
-		ubi->beb_rsvd_pebs += i;
-		if (i > 0)
-			ubi_msg("reserve more %d PEBs", i);
-	}
+	ubi_update_reserved(ubi);
 	ubi->vol_count -= 1;
 	spin_unlock(&ubi->volumes_lock);
 
 	ubi_volume_notify(ubi, vol, UBI_VOLUME_REMOVED);
-	if (!no_vtbl && paranoid_check_volumes(ubi))
-		dbg_err("check failed while removing volume %d", vol_id);
+	if (!no_vtbl)
+		self_check_volumes(ubi);
 
 	return err;
 
@@ -496,7 +487,7 @@ int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs)
 
 	if (vol->vol_type == UBI_STATIC_VOLUME &&
 	    reserved_pebs < vol->used_ebs) {
-		dbg_err("too small size %d, %d LEBs contain data",
+		ubi_err("too small size %d, %d LEBs contain data",
 			reserved_pebs, vol->used_ebs);
 		return -EINVAL;
 	}
@@ -525,8 +516,11 @@ int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs)
 	if (pebs > 0) {
 		spin_lock(&ubi->volumes_lock);
 		if (pebs > ubi->avail_pebs) {
-			dbg_err("not enough PEBs: requested %d, available %d",
+			ubi_err("not enough PEBs: requested %d, available %d",
 				pebs, ubi->avail_pebs);
+			if (ubi->corr_peb_count)
+				ubi_err("%d PEBs are corrupted and not used",
+					ubi->corr_peb_count);
 			spin_unlock(&ubi->volumes_lock);
 			err = -ENOSPC;
 			goto out_free;
@@ -541,7 +535,7 @@ int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs)
 	}
 
 	/* Change volume table record */
-	memcpy(&vtbl_rec, &ubi->vtbl[vol_id], sizeof(struct ubi_vtbl_record));
+	vtbl_rec = ubi->vtbl[vol_id];
 	vtbl_rec.reserved_pebs = cpu_to_be32(reserved_pebs);
 	err = ubi_change_vtbl_record(ubi, vol_id, &vtbl_rec);
 	if (err)
@@ -556,15 +550,7 @@ int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs)
 		spin_lock(&ubi->volumes_lock);
 		ubi->rsvd_pebs += pebs;
 		ubi->avail_pebs -= pebs;
-		pebs = ubi->beb_rsvd_level - ubi->beb_rsvd_pebs;
-		if (pebs > 0) {
-			pebs = ubi->avail_pebs >= pebs ? pebs : ubi->avail_pebs;
-			ubi->avail_pebs -= pebs;
-			ubi->rsvd_pebs += pebs;
-			ubi->beb_rsvd_pebs += pebs;
-			if (pebs > 0)
-				ubi_msg("reserve more %d PEBs", pebs);
-		}
+		ubi_update_reserved(ubi);
 		for (i = 0; i < reserved_pebs; i++)
 			new_mapping[i] = vol->eba_tbl[i];
 		kfree(vol->eba_tbl);
@@ -581,8 +567,7 @@ int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs)
 	}
 
 	ubi_volume_notify(ubi, vol, UBI_VOLUME_RESIZED);
-	if (paranoid_check_volumes(ubi))
-		dbg_err("check failed while re-sizing volume %d", vol_id);
+	self_check_volumes(ubi);
 	return err;
 
 out_acc:
@@ -631,8 +616,8 @@ int ubi_rename_volumes(struct ubi_device *ubi, struct list_head *rename_list)
 		}
 	}
 
-	if (!err && paranoid_check_volumes(ubi))
-		;
+	if (!err)
+		self_check_volumes(ubi);
 	return err;
 }
 
@@ -679,8 +664,7 @@ int ubi_add_volume(struct ubi_device *ubi, struct ubi_volume *vol)
 		return err;
 	}
 
-	if (paranoid_check_volumes(ubi))
-		dbg_err("check failed while adding volume %d", vol_id);
+	self_check_volumes(ubi);
 	return err;
 
 out_cdev:
@@ -705,16 +689,14 @@ void ubi_free_volume(struct ubi_device *ubi, struct ubi_volume *vol)
 	volume_sysfs_close(vol);
 }
 
-#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
-
 /**
- * paranoid_check_volume - check volume information.
+ * self_check_volume - check volume information.
  * @ubi: UBI device description object
  * @vol_id: volume ID
  *
  * Returns zero if volume is all right and a a negative error code if not.
  */
-static int paranoid_check_volume(struct ubi_device *ubi, int vol_id)
+static int self_check_volume(struct ubi_device *ubi, int vol_id)
 {
 	int idx = vol_id2idx(ubi, vol_id);
 	int reserved_pebs, alignment, data_pad, vol_type, name_len, upd_marker;
@@ -764,7 +746,7 @@ static int paranoid_check_volume(struct ubi_device *ubi, int vol_id)
 	}
 
 	if (vol->upd_marker && vol->corrupted) {
-		dbg_err("update marker and corrupted simultaneously");
+		ubi_err("update marker and corrupted simultaneously");
 		goto fail;
 	}
 
@@ -784,11 +766,6 @@ static int paranoid_check_volume(struct ubi_device *ubi, int vol_id)
 		goto fail;
 	}
 
-	if (!vol->name) {
-		ubi_err("NULL volume name");
-		goto fail;
-	}
-
 	n = strnlen(vol->name, vol->name_len + 1);
 	if (n != vol->name_len) {
 		ubi_err("bad name_len %lld", n);
@@ -851,31 +828,33 @@ static int paranoid_check_volume(struct ubi_device *ubi, int vol_id)
 	return 0;
 
 fail:
-	ubi_err("paranoid check failed for volume %d", vol_id);
+	ubi_err("self-check failed for volume %d", vol_id);
 	if (vol)
-		ubi_dbg_dump_vol_info(vol);
-	ubi_dbg_dump_vtbl_record(&ubi->vtbl[vol_id], vol_id);
+		ubi_dump_vol_info(vol);
+	ubi_dump_vtbl_record(&ubi->vtbl[vol_id], vol_id);
 	dump_stack();
 	spin_unlock(&ubi->volumes_lock);
 	return -EINVAL;
 }
 
 /**
- * paranoid_check_volumes - check information about all volumes.
+ * self_check_volumes - check information about all volumes.
  * @ubi: UBI device description object
  *
  * Returns zero if volumes are all right and a a negative error code if not.
  */
-static int paranoid_check_volumes(struct ubi_device *ubi)
+static int self_check_volumes(struct ubi_device *ubi)
 {
 	int i, err = 0;
 
+	if (!ubi_dbg_chk_gen(ubi))
+		return 0;
+
 	for (i = 0; i < ubi->vtbl_slots; i++) {
-		err = paranoid_check_volume(ubi, i);
+		err = self_check_volume(ubi, i);
 		if (err)
 			break;
 	}
 
 	return err;
 }
-#endif
diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
index 14c10bed94e..d77b1c1d7c7 100644
--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -37,16 +37,15 @@
  * LEB 1. This scheme guarantees recoverability from unclean reboots.
  *
  * In this UBI implementation the on-flash volume table does not contain any
- * information about how many data static volumes contain. This information may
- * be found from the scanning data.
+ * information about how much data static volumes contain.
  *
  * But it would still be beneficial to store this information in the volume
  * table. For example, suppose we have a static volume X, and all its physical
  * eraseblocks became bad for some reasons. Suppose we are attaching the
- * corresponding MTD device, the scanning has found no logical eraseblocks
+ * corresponding MTD device, for some reason we find no logical eraseblocks
  * corresponding to the volume X. According to the volume table volume X does
  * exist. So we don't know whether it is just empty or all its physical
- * eraseblocks went bad. So we cannot alarm the user about this corruption.
+ * eraseblocks went bad. So we cannot alarm the user properly.
  *
  * The volume table also stores so-called "update marker", which is used for
  * volume updates. Before updating the volume, the update marker is set, and
@@ -62,11 +61,7 @@
 #include <asm/div64.h>
 #include "ubi.h"
 
-#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
-static void paranoid_vtbl_check(const struct ubi_device *ubi);
-#else
-#define paranoid_vtbl_check(ubi)
-#endif
+static void self_vtbl_check(const struct ubi_device *ubi);
 
 /* Empty volume table record */
 static struct ubi_vtbl_record empty_vtbl_record;
@@ -106,12 +101,12 @@ int ubi_change_vtbl_record(struct ubi_device *ubi, int idx,
 			return err;
 
 		err = ubi_eba_write_leb(ubi, layout_vol, i, ubi->vtbl, 0,
-					ubi->vtbl_size, UBI_LONGTERM);
+					ubi->vtbl_size);
 		if (err)
 			return err;
 	}
 
-	paranoid_vtbl_check(ubi);
+	self_vtbl_check(ubi);
 	return 0;
 }
 
@@ -158,7 +153,7 @@ int ubi_vtbl_rename_volumes(struct ubi_device *ubi,
 			return err;
 
 		err = ubi_eba_write_leb(ubi, layout_vol, i, ubi->vtbl, 0,
-					ubi->vtbl_size, UBI_LONGTERM);
+					ubi->vtbl_size);
 		if (err)
 			return err;
 	}
@@ -197,7 +192,7 @@ static int vtbl_check(const struct ubi_device *ubi,
 		if (be32_to_cpu(vtbl[i].crc) != crc) {
 			ubi_err("bad CRC at record %u: %#08x, not %#08x",
 				 i, crc, be32_to_cpu(vtbl[i].crc));
-			ubi_dbg_dump_vtbl_record(&vtbl[i], i);
+			ubi_dump_vtbl_record(&vtbl[i], i);
 			return 1;
 		}
 
@@ -229,7 +224,7 @@ static int vtbl_check(const struct ubi_device *ubi,
 
 		n = ubi->leb_size % alignment;
 		if (data_pad != n) {
-			dbg_err("bad data_pad, has to be %d", n);
+			ubi_err("bad data_pad, has to be %d", n);
 			err = 6;
 			goto bad;
 		}
@@ -245,7 +240,7 @@ static int vtbl_check(const struct ubi_device *ubi,
 		}
 
 		if (reserved_pebs > ubi->good_peb_count) {
-			dbg_err("too large reserved_pebs %d, good PEBs %d",
+			ubi_err("too large reserved_pebs %d, good PEBs %d",
 				reserved_pebs, ubi->good_peb_count);
 			err = 9;
 			goto bad;
@@ -275,10 +270,10 @@ static int vtbl_check(const struct ubi_device *ubi,
 
 			if (len1 > 0 && len1 == len2 &&
 			    !strncmp(vtbl[i].name, vtbl[n].name, len1)) {
-				ubi_err("volumes %d and %d have the same name"
-					" \"%s\"", i, n, vtbl[i].name);
-				ubi_dbg_dump_vtbl_record(&vtbl[i], i);
-				ubi_dbg_dump_vtbl_record(&vtbl[n], n);
+				ubi_err("volumes %d and %d have the same name \"%s\"",
+					i, n, vtbl[i].name);
+				ubi_dump_vtbl_record(&vtbl[i], i);
+				ubi_dump_vtbl_record(&vtbl[n], n);
 				return -EINVAL;
 			}
 		}
@@ -288,75 +283,64 @@ static int vtbl_check(const struct ubi_device *ubi,
 
 bad:
 	ubi_err("volume table check failed: record %d, error %d", i, err);
-	ubi_dbg_dump_vtbl_record(&vtbl[i], i);
+	ubi_dump_vtbl_record(&vtbl[i], i);
 	return -EINVAL;
 }
 
 /**
  * create_vtbl - create a copy of volume table.
  * @ubi: UBI device description object
- * @si: scanning information
+ * @ai: attaching information
  * @copy: number of the volume table copy
  * @vtbl: contents of the volume table
  *
  * This function returns zero in case of success and a negative error code in
  * case of failure.
  */
-static int create_vtbl(struct ubi_device *ubi, struct ubi_scan_info *si,
+static int create_vtbl(struct ubi_device *ubi, struct ubi_attach_info *ai,
 		       int copy, void *vtbl)
 {
 	int err, tries = 0;
-	static struct ubi_vid_hdr *vid_hdr;
-	struct ubi_scan_volume *sv;
-	struct ubi_scan_leb *new_seb, *old_seb = NULL;
+	struct ubi_vid_hdr *vid_hdr;
+	struct ubi_ainf_peb *new_aeb;
 
-	ubi_msg("create volume table (copy #%d)", copy + 1);
+	dbg_gen("create volume table (copy #%d)", copy + 1);
 
 	vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_KERNEL);
 	if (!vid_hdr)
 		return -ENOMEM;
 
-	/*
-	 * Check if there is a logical eraseblock which would have to contain
-	 * this volume table copy was found during scanning. It has to be wiped
-	 * out.
-	 */
-	sv = ubi_scan_find_sv(si, UBI_LAYOUT_VOLUME_ID);
-	if (sv)
-		old_seb = ubi_scan_find_seb(sv, copy);
-
 retry:
-	new_seb = ubi_scan_get_free_peb(ubi, si);
-	if (IS_ERR(new_seb)) {
-		err = PTR_ERR(new_seb);
+	new_aeb = ubi_early_get_peb(ubi, ai);
+	if (IS_ERR(new_aeb)) {
+		err = PTR_ERR(new_aeb);
 		goto out_free;
 	}
 
-	vid_hdr->vol_type = UBI_VID_DYNAMIC;
+	vid_hdr->vol_type = UBI_LAYOUT_VOLUME_TYPE;
 	vid_hdr->vol_id = cpu_to_be32(UBI_LAYOUT_VOLUME_ID);
 	vid_hdr->compat = UBI_LAYOUT_VOLUME_COMPAT;
 	vid_hdr->data_size = vid_hdr->used_ebs =
 			     vid_hdr->data_pad = cpu_to_be32(0);
 	vid_hdr->lnum = cpu_to_be32(copy);
-	vid_hdr->sqnum = cpu_to_be64(++si->max_sqnum);
+	vid_hdr->sqnum = cpu_to_be64(++ai->max_sqnum);
 
 	/* The EC header is already there, write the VID header */
-	err = ubi_io_write_vid_hdr(ubi, new_seb->pnum, vid_hdr);
+	err = ubi_io_write_vid_hdr(ubi, new_aeb->pnum, vid_hdr);
 	if (err)
 		goto write_error;
 
 	/* Write the layout volume contents */
-	err = ubi_io_write_data(ubi, vtbl, new_seb->pnum, 0, ubi->vtbl_size);
+	err = ubi_io_write_data(ubi, vtbl, new_aeb->pnum, 0, ubi->vtbl_size);
 	if (err)
 		goto write_error;
 
 	/*
-	 * And add it to the scanning information. Don't delete the old
-	 * @old_seb as it will be deleted and freed in 'ubi_scan_add_used()'.
+	 * And add it to the attaching information. Don't delete the old version
+	 * of this LEB as it will be deleted and freed in 'ubi_add_to_av()'.
 	 */
-	err = ubi_scan_add_used(ubi, si, new_seb->pnum, new_seb->ec,
-				vid_hdr, 0);
-	kfree(new_seb);
+	err = ubi_add_to_av(ubi, ai, new_aeb->pnum, new_aeb->ec, vid_hdr, 0);
+	kmem_cache_free(ai->aeb_slab_cache, new_aeb);
 	ubi_free_vid_hdr(ubi, vid_hdr);
 	return err;
 
@@ -366,10 +350,10 @@ write_error:
 		 * Probably this physical eraseblock went bad, try to pick
 		 * another one.
 		 */
-		list_add_tail(&new_seb->u.list, &si->corr);
+		list_add(&new_aeb->u.list, &ai->erase);
 		goto retry;
 	}
-	kfree(new_seb);
+	kmem_cache_free(ai->aeb_slab_cache, new_aeb);
 out_free:
 	ubi_free_vid_hdr(ubi, vid_hdr);
 	return err;
@@ -379,20 +363,20 @@ out_free:
 /**
  * process_lvol - process the layout volume.
  * @ubi: UBI device description object
- * @si: scanning information
- * @sv: layout volume scanning information
+ * @ai: attaching information
+ * @av: layout volume attaching information
  *
  * This function is responsible for reading the layout volume, ensuring it is
  * not corrupted, and recovering from corruptions if needed. Returns volume
  * table in case of success and a negative error code in case of failure.
  */
 static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
-					    struct ubi_scan_info *si,
-					    struct ubi_scan_volume *sv)
+					    struct ubi_attach_info *ai,
+					    struct ubi_ainf_volume *av)
 {
 	int err;
 	struct rb_node *rb;
-	struct ubi_scan_leb *seb;
+	struct ubi_ainf_peb *aeb;
 	struct ubi_vtbl_record *leb[UBI_LAYOUT_VOLUME_EBS] = { NULL, NULL };
 	int leb_corrupted[UBI_LAYOUT_VOLUME_EBS] = {1, 1};
 
@@ -424,28 +408,27 @@ static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
 	dbg_gen("check layout volume");
 
 	/* Read both LEB 0 and LEB 1 into memory */
-	ubi_rb_for_each_entry(rb, seb, &sv->root, u.rb) {
-		leb[seb->lnum] = vmalloc(ubi->vtbl_size);
-		if (!leb[seb->lnum]) {
+	ubi_rb_for_each_entry(rb, aeb, &av->root, u.rb) {
+		leb[aeb->lnum] = vzalloc(ubi->vtbl_size);
+		if (!leb[aeb->lnum]) {
 			err = -ENOMEM;
 			goto out_free;
 		}
-		memset(leb[seb->lnum], 0, ubi->vtbl_size);
 
-		err = ubi_io_read_data(ubi, leb[seb->lnum], seb->pnum, 0,
+		err = ubi_io_read_data(ubi, leb[aeb->lnum], aeb->pnum, 0,
 				       ubi->vtbl_size);
-		if (err == UBI_IO_BITFLIPS || err == -EBADMSG)
+		if (err == UBI_IO_BITFLIPS || mtd_is_eccerr(err))
 			/*
 			 * Scrub the PEB later. Note, -EBADMSG indicates an
 			 * uncorrectable ECC error, but we have our own CRC and
 			 * the data will be checked later. If the data is OK,
 			 * the PEB will be scrubbed (because we set
-			 * seb->scrub). If the data is not OK, the contents of
+			 * aeb->scrub). If the data is not OK, the contents of
 			 * the PEB will be recovered from the second copy, and
-			 * seb->scrub will be cleared in
-			 * 'ubi_scan_add_used()'.
+			 * aeb->scrub will be cleared in
+			 * 'ubi_add_to_av()'.
 			 */
-			seb->scrub = 1;
+			aeb->scrub = 1;
 		else if (err)
 			goto out_free;
 	}
@@ -464,7 +447,7 @@ static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
 						  ubi->vtbl_size);
 		if (leb_corrupted[1]) {
 			ubi_warn("volume table copy #2 is corrupted");
-			err = create_vtbl(ubi, si, 1, leb[0]);
+			err = create_vtbl(ubi, ai, 1, leb[0]);
 			if (err)
 				goto out_free;
 			ubi_msg("volume table was restored");
@@ -487,7 +470,7 @@ static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
 		}
 
 		ubi_warn("volume table copy #1 is corrupted");
-		err = create_vtbl(ubi, si, 0, leb[1]);
+		err = create_vtbl(ubi, ai, 0, leb[1]);
 		if (err)
 			goto out_free;
 		ubi_msg("volume table was restored");
@@ -505,21 +488,20 @@ out_free:
 /**
  * create_empty_lvol - create empty layout volume.
  * @ubi: UBI device description object
- * @si: scanning information
+ * @ai: attaching information
  *
  * This function returns volume table contents in case of success and a
  * negative error code in case of failure.
  */
 static struct ubi_vtbl_record *create_empty_lvol(struct ubi_device *ubi,
-						 struct ubi_scan_info *si)
+						 struct ubi_attach_info *ai)
 {
 	int i;
 	struct ubi_vtbl_record *vtbl;
 
-	vtbl = vmalloc(ubi->vtbl_size);
+	vtbl = vzalloc(ubi->vtbl_size);
 	if (!vtbl)
 		return ERR_PTR(-ENOMEM);
-	memset(vtbl, 0, ubi->vtbl_size);
 
 	for (i = 0; i < ubi->vtbl_slots; i++)
 		memcpy(&vtbl[i], &empty_vtbl_record, UBI_VTBL_RECORD_SIZE);
@@ -527,7 +509,7 @@ static struct ubi_vtbl_record *create_empty_lvol(struct ubi_device *ubi,
 	for (i = 0; i < UBI_LAYOUT_VOLUME_EBS; i++) {
 		int err;
 
-		err = create_vtbl(ubi, si, i, vtbl);
+		err = create_vtbl(ubi, ai, i, vtbl);
 		if (err) {
 			vfree(vtbl);
 			return ERR_PTR(err);
@@ -540,18 +522,19 @@ static struct ubi_vtbl_record *create_empty_lvol(struct ubi_device *ubi,
 /**
  * init_volumes - initialize volume information for existing volumes.
  * @ubi: UBI device description object
- * @si: scanning information
+ * @ai: scanning information
  * @vtbl: volume table
  *
  * This function allocates volume description objects for existing volumes.
  * Returns zero in case of success and a negative error code in case of
  * failure.
  */
-static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si,
+static int init_volumes(struct ubi_device *ubi,
+			const struct ubi_attach_info *ai,
 			const struct ubi_vtbl_record *vtbl)
 {
 	int i, reserved_pebs = 0;
-	struct ubi_scan_volume *sv;
+	struct ubi_ainf_volume *av;
 	struct ubi_volume *vol;
 
 	for (i = 0; i < ubi->vtbl_slots; i++) {
@@ -579,8 +562,8 @@ static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si,
 		if (vtbl[i].flags & UBI_VTBL_AUTORESIZE_FLG) {
 			/* Auto re-size flag may be set only for one volume */
 			if (ubi->autoresize_vol_id != -1) {
-				ubi_err("more than one auto-resize volume (%d "
-					"and %d)", ubi->autoresize_vol_id, i);
+				ubi_err("more than one auto-resize volume (%d and %d)",
+					ubi->autoresize_vol_id, i);
 				kfree(vol);
 				return -EINVAL;
 			}
@@ -607,8 +590,8 @@ static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si,
 		}
 
 		/* Static volumes only */
-		sv = ubi_scan_find_sv(si, i);
-		if (!sv) {
+		av = ubi_find_av(ai, i);
+		if (!av) {
 			/*
 			 * No eraseblocks belonging to this volume found. We
 			 * don't actually know whether this static volume is
@@ -620,22 +603,22 @@ static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si,
 			continue;
 		}
 
-		if (sv->leb_count != sv->used_ebs) {
+		if (av->leb_count != av->used_ebs) {
 			/*
 			 * We found a static volume which misses several
 			 * eraseblocks. Treat it as corrupted.
 			 */
 			ubi_warn("static volume %d misses %d LEBs - corrupted",
-				 sv->vol_id, sv->used_ebs - sv->leb_count);
+				 av->vol_id, av->used_ebs - av->leb_count);
 			vol->corrupted = 1;
 			continue;
 		}
 
-		vol->used_ebs = sv->used_ebs;
+		vol->used_ebs = av->used_ebs;
 		vol->used_bytes =
 			(long long)(vol->used_ebs - 1) * vol->usable_leb_size;
-		vol->used_bytes += sv->last_data_size;
-		vol->last_eb_bytes = sv->last_data_size;
+		vol->used_bytes += av->last_data_size;
+		vol->last_eb_bytes = av->last_data_size;
 	}
 
 	/* And add the layout volume */
@@ -644,7 +627,7 @@ static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si,
 		return -ENOMEM;
 
 	vol->reserved_pebs = UBI_LAYOUT_VOLUME_EBS;
-	vol->alignment = 1;
+	vol->alignment = UBI_LAYOUT_VOLUME_ALIGN;
 	vol->vol_type = UBI_DYNAMIC_VOLUME;
 	vol->name_len = sizeof(UBI_LAYOUT_VOLUME_NAME) - 1;
 	memcpy(vol->name, UBI_LAYOUT_VOLUME_NAME, vol->name_len + 1);
@@ -662,9 +645,13 @@ static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si,
 	ubi->vol_count += 1;
 	vol->ubi = ubi;
 
-	if (reserved_pebs > ubi->avail_pebs)
+	if (reserved_pebs > ubi->avail_pebs) {
 		ubi_err("not enough PEBs, required %d, available %d",
 			reserved_pebs, ubi->avail_pebs);
+		if (ubi->corr_peb_count)
+			ubi_err("%d PEBs are corrupted and not used",
+				ubi->corr_peb_count);
+	}
 	ubi->rsvd_pebs += reserved_pebs;
 	ubi->avail_pebs -= reserved_pebs;
 
@@ -672,105 +659,104 @@ static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si,
 }
 
 /**
- * check_sv - check volume scanning information.
+ * check_av - check volume attaching information.
  * @vol: UBI volume description object
- * @sv: volume scanning information
+ * @av: volume attaching information
  *
- * This function returns zero if the volume scanning information is consistent
+ * This function returns zero if the volume attaching information is consistent
  * to the data read from the volume tabla, and %-EINVAL if not.
  */
-static int check_sv(const struct ubi_volume *vol,
-		    const struct ubi_scan_volume *sv)
+static int check_av(const struct ubi_volume *vol,
+		    const struct ubi_ainf_volume *av)
 {
 	int err;
 
-	if (sv->highest_lnum >= vol->reserved_pebs) {
+	if (av->highest_lnum >= vol->reserved_pebs) {
 		err = 1;
 		goto bad;
 	}
-	if (sv->leb_count > vol->reserved_pebs) {
+	if (av->leb_count > vol->reserved_pebs) {
 		err = 2;
 		goto bad;
 	}
-	if (sv->vol_type != vol->vol_type) {
+	if (av->vol_type != vol->vol_type) {
 		err = 3;
 		goto bad;
 	}
-	if (sv->used_ebs > vol->reserved_pebs) {
+	if (av->used_ebs > vol->reserved_pebs) {
 		err = 4;
 		goto bad;
 	}
-	if (sv->data_pad != vol->data_pad) {
+	if (av->data_pad != vol->data_pad) {
 		err = 5;
 		goto bad;
 	}
 	return 0;
 
 bad:
-	ubi_err("bad scanning information, error %d", err);
-	ubi_dbg_dump_sv(sv);
-	ubi_dbg_dump_vol_info(vol);
+	ubi_err("bad attaching information, error %d", err);
+	ubi_dump_av(av);
+	ubi_dump_vol_info(vol);
 	return -EINVAL;
 }
 
 /**
- * check_scanning_info - check that scanning information.
+ * check_attaching_info - check that attaching information.
  * @ubi: UBI device description object
- * @si: scanning information
+ * @ai: attaching information
  *
  * Even though we protect on-flash data by CRC checksums, we still don't trust
- * the media. This function ensures that scanning information is consistent to
- * the information read from the volume table. Returns zero if the scanning
+ * the media. This function ensures that attaching information is consistent to
+ * the information read from the volume table. Returns zero if the attaching
  * information is OK and %-EINVAL if it is not.
  */
-static int check_scanning_info(const struct ubi_device *ubi,
-			       struct ubi_scan_info *si)
+static int check_attaching_info(const struct ubi_device *ubi,
+			       struct ubi_attach_info *ai)
 {
 	int err, i;
-	struct ubi_scan_volume *sv;
+	struct ubi_ainf_volume *av;
 	struct ubi_volume *vol;
 
-	if (si->vols_found > UBI_INT_VOL_COUNT + ubi->vtbl_slots) {
-		ubi_err("scanning found %d volumes, maximum is %d + %d",
-			si->vols_found, UBI_INT_VOL_COUNT, ubi->vtbl_slots);
+	if (ai->vols_found > UBI_INT_VOL_COUNT + ubi->vtbl_slots) {
+		ubi_err("found %d volumes while attaching, maximum is %d + %d",
+			ai->vols_found, UBI_INT_VOL_COUNT, ubi->vtbl_slots);
 		return -EINVAL;
 	}
 
-	if (si->highest_vol_id >= ubi->vtbl_slots + UBI_INT_VOL_COUNT &&
-	    si->highest_vol_id < UBI_INTERNAL_VOL_START) {
-		ubi_err("too large volume ID %d found by scanning",
-			si->highest_vol_id);
+	if (ai->highest_vol_id >= ubi->vtbl_slots + UBI_INT_VOL_COUNT &&
+	    ai->highest_vol_id < UBI_INTERNAL_VOL_START) {
+		ubi_err("too large volume ID %d found", ai->highest_vol_id);
 		return -EINVAL;
 	}
 
 	for (i = 0; i < ubi->vtbl_slots + UBI_INT_VOL_COUNT; i++) {
 		cond_resched();
 
-		sv = ubi_scan_find_sv(si, i);
+		av = ubi_find_av(ai, i);
 		vol = ubi->volumes[i];
 		if (!vol) {
-			if (sv)
-				ubi_scan_rm_volume(si, sv);
+			if (av)
+				ubi_remove_av(ai, av);
 			continue;
 		}
 
 		if (vol->reserved_pebs == 0) {
 			ubi_assert(i < ubi->vtbl_slots);
 
-			if (!sv)
+			if (!av)
 				continue;
 
 			/*
-			 * During scanning we found a volume which does not
+			 * During attaching we found a volume which does not
 			 * exist according to the information in the volume
 			 * table. This must have happened due to an unclean
 			 * reboot while the volume was being removed. Discard
 			 * these eraseblocks.
 			 */
-			ubi_msg("finish volume %d removal", sv->vol_id);
-			ubi_scan_rm_volume(si, sv);
-		} else if (sv) {
-			err = check_sv(vol, sv);
+			ubi_msg("finish volume %d removal", av->vol_id);
+			ubi_remove_av(ai, av);
+		} else if (av) {
+			err = check_av(vol, av);
 			if (err)
 				return err;
 		}
@@ -782,16 +768,16 @@ static int check_scanning_info(const struct ubi_device *ubi,
 /**
  * ubi_read_volume_table - read the volume table.
  * @ubi: UBI device description object
- * @si: scanning information
+ * @ai: attaching information
  *
  * This function reads volume table, checks it, recover from errors if needed,
  * or creates it if needed. Returns zero in case of success and a negative
  * error code in case of failure.
  */
-int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_scan_info *si)
+int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_attach_info *ai)
 {
 	int i, err;
-	struct ubi_scan_volume *sv;
+	struct ubi_ainf_volume *av;
 
 	empty_vtbl_record.crc = cpu_to_be32(0xf116c36b);
 
@@ -806,8 +792,8 @@ int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_scan_info *si)
 	ubi->vtbl_size = ubi->vtbl_slots * UBI_VTBL_RECORD_SIZE;
 	ubi->vtbl_size = ALIGN(ubi->vtbl_size, ubi->min_io_size);
 
-	sv = ubi_scan_find_sv(si, UBI_LAYOUT_VOLUME_ID);
-	if (!sv) {
+	av = ubi_find_av(ai, UBI_LAYOUT_VOLUME_ID);
+	if (!av) {
 		/*
 		 * No logical eraseblocks belonging to the layout volume were
 		 * found. This could mean that the flash is just empty. In
@@ -816,8 +802,8 @@ int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_scan_info *si)
 		 * But if flash is not empty this must be a corruption or the
 		 * MTD device just contains garbage.
 		 */
-		if (si->is_empty) {
-			ubi->vtbl = create_empty_lvol(ubi, si);
+		if (ai->is_empty) {
+			ubi->vtbl = create_empty_lvol(ubi, ai);
 			if (IS_ERR(ubi->vtbl))
 				return PTR_ERR(ubi->vtbl);
 		} else {
@@ -825,33 +811,33 @@ int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_scan_info *si)
 			return -EINVAL;
 		}
 	} else {
-		if (sv->leb_count > UBI_LAYOUT_VOLUME_EBS) {
+		if (av->leb_count > UBI_LAYOUT_VOLUME_EBS) {
 			/* This must not happen with proper UBI images */
-			dbg_err("too many LEBs (%d) in layout volume",
-				sv->leb_count);
+			ubi_err("too many LEBs (%d) in layout volume",
+				av->leb_count);
 			return -EINVAL;
 		}
 
-		ubi->vtbl = process_lvol(ubi, si, sv);
+		ubi->vtbl = process_lvol(ubi, ai, av);
 		if (IS_ERR(ubi->vtbl))
 			return PTR_ERR(ubi->vtbl);
 	}
 
-	ubi->avail_pebs = ubi->good_peb_count;
+	ubi->avail_pebs = ubi->good_peb_count - ubi->corr_peb_count;
 
 	/*
 	 * The layout volume is OK, initialize the corresponding in-RAM data
 	 * structures.
 	 */
-	err = init_volumes(ubi, si, ubi->vtbl);
+	err = init_volumes(ubi, ai, ubi->vtbl);
 	if (err)
 		goto out_free;
 
 	/*
-	 * Make sure that the scanning information is consistent to the
+	 * Make sure that the attaching information is consistent to the
 	 * information stored in the volume table.
 	 */
-	err = check_scanning_info(ubi, si);
+	err = check_attaching_info(ubi, ai);
 	if (err)
 		goto out_free;
 
@@ -866,18 +852,17 @@ out_free:
 	return err;
 }
 
-#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
-
 /**
- * paranoid_vtbl_check - check volume table.
+ * self_vtbl_check - check volume table.
  * @ubi: UBI device description object
  */
-static void paranoid_vtbl_check(const struct ubi_device *ubi)
+static void self_vtbl_check(const struct ubi_device *ubi)
 {
+	if (!ubi_dbg_chk_gen(ubi))
+		return;
+
 	if (vtbl_check(ubi, ubi->vtbl)) {
-		ubi_err("paranoid check failed");
+		ubi_err("self-check failed");
 		BUG();
 	}
 }
-
-#endif /* CONFIG_MTD_UBI_DEBUG_PARANOID */
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index ee7b1d8fbb9..0f3425dac91 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -40,12 +40,6 @@
  * physical eraseblocks with low erase counter to free physical eraseblocks
  * with high erase counter.
  *
- * The 'ubi_wl_get_peb()' function accepts data type hints which help to pick
- * an "optimal" physical eraseblock. For example, when it is known that the
- * physical eraseblock will be "put" soon because it contains short-term data,
- * the WL sub-system may pick a free physical eraseblock with low erase
- * counter, and so forth.
- *
  * If the WL sub-system fails to erase a physical eraseblock, it marks it as
  * bad.
  *
@@ -69,8 +63,7 @@
  *    to the user; instead, we first want to let users fill them up with data;
  *
  *  o there is a chance that the user will put the physical eraseblock very
- *    soon, so it makes sense not to move it for some time, but wait; this is
- *    especially important in case of "short term" physical eraseblocks.
+ *    soon, so it makes sense not to move it for some time, but wait.
  *
  * Physical eraseblocks stay protected only for limited time. But the "time" is
  * measured in erase cycles in this case. This is implemented with help of the
@@ -141,35 +134,46 @@
  */
 #define WL_MAX_FAILURES 32
 
+static int self_check_ec(struct ubi_device *ubi, int pnum, int ec);
+static int self_check_in_wl_tree(const struct ubi_device *ubi,
+				 struct ubi_wl_entry *e, struct rb_root *root);
+static int self_check_in_pq(const struct ubi_device *ubi,
+			    struct ubi_wl_entry *e);
+
+#ifdef CONFIG_MTD_UBI_FASTMAP
 /**
- * struct ubi_work - UBI work description data structure.
- * @list: a link in the list of pending works
- * @func: worker function
- * @e: physical eraseblock to erase
- * @torture: if the physical eraseblock has to be tortured
- *
- * The @func pointer points to the worker function. If the @cancel argument is
- * not zero, the worker has to free the resources and exit immediately. The
- * worker has to return zero in case of success and a negative error code in
- * case of failure.
+ * update_fastmap_work_fn - calls ubi_update_fastmap from a work queue
+ * @wrk: the work description object
  */
-struct ubi_work {
-	struct list_head list;
-	int (*func)(struct ubi_device *ubi, struct ubi_work *wrk, int cancel);
-	/* The below fields are only relevant to erasure works */
-	struct ubi_wl_entry *e;
-	int torture;
-};
-
-#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
-static int paranoid_check_ec(struct ubi_device *ubi, int pnum, int ec);
-static int paranoid_check_in_wl_tree(struct ubi_wl_entry *e,
-				     struct rb_root *root);
-static int paranoid_check_in_pq(struct ubi_device *ubi, struct ubi_wl_entry *e);
+static void update_fastmap_work_fn(struct work_struct *wrk)
+{
+	struct ubi_device *ubi = container_of(wrk, struct ubi_device, fm_work);
+	ubi_update_fastmap(ubi);
+}
+
+/**
+ *  ubi_ubi_is_fm_block - returns 1 if a PEB is currently used in a fastmap.
+ *  @ubi: UBI device description object
+ *  @pnum: the to be checked PEB
+ */
+static int ubi_is_fm_block(struct ubi_device *ubi, int pnum)
+{
+	int i;
+
+	if (!ubi->fm)
+		return 0;
+
+	for (i = 0; i < ubi->fm->used_blocks; i++)
+		if (ubi->fm->e[i]->pnum == pnum)
+			return 1;
+
+	return 0;
+}
 #else
-#define paranoid_check_ec(ubi, pnum, ec) 0
-#define paranoid_check_in_wl_tree(e, root)
-#define paranoid_check_in_pq(ubi, e) 0
+static int ubi_is_fm_block(struct ubi_device *ubi, int pnum)
+{
+	return 0;
+}
 #endif
 
 /**
@@ -268,18 +272,16 @@ static int produce_free_peb(struct ubi_device *ubi)
 {
 	int err;
 
-	spin_lock(&ubi->wl_lock);
 	while (!ubi->free.rb_node) {
 		spin_unlock(&ubi->wl_lock);
 
 		dbg_wl("do one work synchronously");
 		err = do_work(ubi);
-		if (err)
-			return err;
 
 		spin_lock(&ubi->wl_lock);
+		if (err)
+			return err;
 	}
-	spin_unlock(&ubi->wl_lock);
 
 	return 0;
 }
@@ -346,19 +348,22 @@ static void prot_queue_add(struct ubi_device *ubi, struct ubi_wl_entry *e)
 
 /**
  * find_wl_entry - find wear-leveling entry closest to certain erase counter.
+ * @ubi: UBI device description object
  * @root: the RB-tree where to look for
- * @max: highest possible erase counter
+ * @diff: maximum possible difference from the smallest erase counter
  *
  * This function looks for a wear leveling entry with erase counter closest to
- * @max and less than @max.
+ * min + @diff, where min is the smallest erase counter.
  */
-static struct ubi_wl_entry *find_wl_entry(struct rb_root *root, int max)
+static struct ubi_wl_entry *find_wl_entry(struct ubi_device *ubi,
+					  struct rb_root *root, int diff)
 {
 	struct rb_node *p;
-	struct ubi_wl_entry *e;
+	struct ubi_wl_entry *e, *prev_e = NULL;
+	int max;
 
 	e = rb_entry(rb_first(root), struct ubi_wl_entry, u.rb);
-	max += e->ec;
+	max = e->ec + diff;
 
 	p = root->rb_node;
 	while (p) {
@@ -369,39 +374,143 @@ static struct ubi_wl_entry *find_wl_entry(struct rb_root *root, int max)
 			p = p->rb_left;
 		else {
 			p = p->rb_right;
+			prev_e = e;
 			e = e1;
 		}
 	}
 
+	/* If no fastmap has been written and this WL entry can be used
+	 * as anchor PEB, hold it back and return the second best WL entry
+	 * such that fastmap can use the anchor PEB later. */
+	if (prev_e && !ubi->fm_disabled &&
+	    !ubi->fm && e->pnum < UBI_FM_MAX_START)
+		return prev_e;
+
 	return e;
 }
 
 /**
- * ubi_wl_get_peb - get a physical eraseblock.
+ * find_mean_wl_entry - find wear-leveling entry with medium erase counter.
  * @ubi: UBI device description object
- * @dtype: type of data which will be stored in this physical eraseblock
+ * @root: the RB-tree where to look for
  *
- * This function returns a physical eraseblock in case of success and a
- * negative error code in case of failure. Might sleep.
+ * This function looks for a wear leveling entry with medium erase counter,
+ * but not greater or equivalent than the lowest erase counter plus
+ * %WL_FREE_MAX_DIFF/2.
  */
-int ubi_wl_get_peb(struct ubi_device *ubi, int dtype)
+static struct ubi_wl_entry *find_mean_wl_entry(struct ubi_device *ubi,
+					       struct rb_root *root)
 {
-	int err, medium_ec;
 	struct ubi_wl_entry *e, *first, *last;
 
-	ubi_assert(dtype == UBI_LONGTERM || dtype == UBI_SHORTTERM ||
-		   dtype == UBI_UNKNOWN);
+	first = rb_entry(rb_first(root), struct ubi_wl_entry, u.rb);
+	last = rb_entry(rb_last(root), struct ubi_wl_entry, u.rb);
+
+	if (last->ec - first->ec < WL_FREE_MAX_DIFF) {
+		e = rb_entry(root->rb_node, struct ubi_wl_entry, u.rb);
+
+#ifdef CONFIG_MTD_UBI_FASTMAP
+		/* If no fastmap has been written and this WL entry can be used
+		 * as anchor PEB, hold it back and return the second best
+		 * WL entry such that fastmap can use the anchor PEB later. */
+		if (e && !ubi->fm_disabled && !ubi->fm &&
+		    e->pnum < UBI_FM_MAX_START)
+			e = rb_entry(rb_next(root->rb_node),
+				     struct ubi_wl_entry, u.rb);
+#endif
+	} else
+		e = find_wl_entry(ubi, root, WL_FREE_MAX_DIFF/2);
+
+	return e;
+}
+
+#ifdef CONFIG_MTD_UBI_FASTMAP
+/**
+ * find_anchor_wl_entry - find wear-leveling entry to used as anchor PEB.
+ * @root: the RB-tree where to look for
+ */
+static struct ubi_wl_entry *find_anchor_wl_entry(struct rb_root *root)
+{
+	struct rb_node *p;
+	struct ubi_wl_entry *e, *victim = NULL;
+	int max_ec = UBI_MAX_ERASECOUNTER;
+
+	ubi_rb_for_each_entry(p, e, root, u.rb) {
+		if (e->pnum < UBI_FM_MAX_START && e->ec < max_ec) {
+			victim = e;
+			max_ec = e->ec;
+		}
+	}
+
+	return victim;
+}
+
+static int anchor_pebs_avalible(struct rb_root *root)
+{
+	struct rb_node *p;
+	struct ubi_wl_entry *e;
+
+	ubi_rb_for_each_entry(p, e, root, u.rb)
+		if (e->pnum < UBI_FM_MAX_START)
+			return 1;
+
+	return 0;
+}
+
+/**
+ * ubi_wl_get_fm_peb - find a physical erase block with a given maximal number.
+ * @ubi: UBI device description object
+ * @anchor: This PEB will be used as anchor PEB by fastmap
+ *
+ * The function returns a physical erase block with a given maximal number
+ * and removes it from the wl subsystem.
+ * Must be called with wl_lock held!
+ */
+struct ubi_wl_entry *ubi_wl_get_fm_peb(struct ubi_device *ubi, int anchor)
+{
+	struct ubi_wl_entry *e = NULL;
+
+	if (!ubi->free.rb_node || (ubi->free_count - ubi->beb_rsvd_pebs < 1))
+		goto out;
+
+	if (anchor)
+		e = find_anchor_wl_entry(&ubi->free);
+	else
+		e = find_mean_wl_entry(ubi, &ubi->free);
+
+	if (!e)
+		goto out;
+
+	self_check_in_wl_tree(ubi, e, &ubi->free);
+
+	/* remove it from the free list,
+	 * the wl subsystem does no longer know this erase block */
+	rb_erase(&e->u.rb, &ubi->free);
+	ubi->free_count--;
+out:
+	return e;
+}
+#endif
+
+/**
+ * __wl_get_peb - get a physical eraseblock.
+ * @ubi: UBI device description object
+ *
+ * This function returns a physical eraseblock in case of success and a
+ * negative error code in case of failure.
+ */
+static int __wl_get_peb(struct ubi_device *ubi)
+{
+	int err;
+	struct ubi_wl_entry *e;
 
 retry:
-	spin_lock(&ubi->wl_lock);
 	if (!ubi->free.rb_node) {
 		if (ubi->works_count == 0) {
-			ubi_assert(list_empty(&ubi->works));
 			ubi_err("no free eraseblocks");
-			spin_unlock(&ubi->wl_lock);
+			ubi_assert(list_empty(&ubi->works));
 			return -ENOSPC;
 		}
-		spin_unlock(&ubi->wl_lock);
 
 		err = produce_free_peb(ubi);
 		if (err < 0)
@@ -409,66 +518,187 @@ retry:
 		goto retry;
 	}
 
-	switch (dtype) {
-	case UBI_LONGTERM:
-		/*
-		 * For long term data we pick a physical eraseblock with high
-		 * erase counter. But the highest erase counter we can pick is
-		 * bounded by the the lowest erase counter plus
-		 * %WL_FREE_MAX_DIFF.
-		 */
-		e = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF);
-		break;
-	case UBI_UNKNOWN:
-		/*
-		 * For unknown data we pick a physical eraseblock with medium
-		 * erase counter. But we by no means can pick a physical
-		 * eraseblock with erase counter greater or equivalent than the
-		 * lowest erase counter plus %WL_FREE_MAX_DIFF.
-		 */
-		first = rb_entry(rb_first(&ubi->free), struct ubi_wl_entry,
-					u.rb);
-		last = rb_entry(rb_last(&ubi->free), struct ubi_wl_entry, u.rb);
-
-		if (last->ec - first->ec < WL_FREE_MAX_DIFF)
-			e = rb_entry(ubi->free.rb_node,
-					struct ubi_wl_entry, u.rb);
-		else {
-			medium_ec = (first->ec + WL_FREE_MAX_DIFF)/2;
-			e = find_wl_entry(&ubi->free, medium_ec);
-		}
-		break;
-	case UBI_SHORTTERM:
-		/*
-		 * For short term data we pick a physical eraseblock with the
-		 * lowest erase counter as we expect it will be erased soon.
-		 */
-		e = rb_entry(rb_first(&ubi->free), struct ubi_wl_entry, u.rb);
-		break;
-	default:
-		BUG();
+	e = find_mean_wl_entry(ubi, &ubi->free);
+	if (!e) {
+		ubi_err("no free eraseblocks");
+		return -ENOSPC;
 	}
 
-	paranoid_check_in_wl_tree(e, &ubi->free);
+	self_check_in_wl_tree(ubi, e, &ubi->free);
 
 	/*
 	 * Move the physical eraseblock to the protection queue where it will
 	 * be protected from being moved for some time.
 	 */
 	rb_erase(&e->u.rb, &ubi->free);
+	ubi->free_count--;
 	dbg_wl("PEB %d EC %d", e->pnum, e->ec);
+#ifndef CONFIG_MTD_UBI_FASTMAP
+	/* We have to enqueue e only if fastmap is disabled,
+	 * is fastmap enabled prot_queue_add() will be called by
+	 * ubi_wl_get_peb() after removing e from the pool. */
 	prot_queue_add(ubi, e);
+#endif
+	return e->pnum;
+}
+
+#ifdef CONFIG_MTD_UBI_FASTMAP
+/**
+ * return_unused_pool_pebs - returns unused PEB to the free tree.
+ * @ubi: UBI device description object
+ * @pool: fastmap pool description object
+ */
+static void return_unused_pool_pebs(struct ubi_device *ubi,
+				    struct ubi_fm_pool *pool)
+{
+	int i;
+	struct ubi_wl_entry *e;
+
+	for (i = pool->used; i < pool->size; i++) {
+		e = ubi->lookuptbl[pool->pebs[i]];
+		wl_tree_add(e, &ubi->free);
+		ubi->free_count++;
+	}
+}
+
+/**
+ * refill_wl_pool - refills all the fastmap pool used by the
+ * WL sub-system.
+ * @ubi: UBI device description object
+ */
+static void refill_wl_pool(struct ubi_device *ubi)
+{
+	struct ubi_wl_entry *e;
+	struct ubi_fm_pool *pool = &ubi->fm_wl_pool;
+
+	return_unused_pool_pebs(ubi, pool);
+
+	for (pool->size = 0; pool->size < pool->max_size; pool->size++) {
+		if (!ubi->free.rb_node ||
+		   (ubi->free_count - ubi->beb_rsvd_pebs < 5))
+			break;
+
+		e = find_wl_entry(ubi, &ubi->free, WL_FREE_MAX_DIFF);
+		self_check_in_wl_tree(ubi, e, &ubi->free);
+		rb_erase(&e->u.rb, &ubi->free);
+		ubi->free_count--;
+
+		pool->pebs[pool->size] = e->pnum;
+	}
+	pool->used = 0;
+}
+
+/**
+ * refill_wl_user_pool - refills all the fastmap pool used by ubi_wl_get_peb.
+ * @ubi: UBI device description object
+ */
+static void refill_wl_user_pool(struct ubi_device *ubi)
+{
+	struct ubi_fm_pool *pool = &ubi->fm_pool;
+
+	return_unused_pool_pebs(ubi, pool);
+
+	for (pool->size = 0; pool->size < pool->max_size; pool->size++) {
+		pool->pebs[pool->size] = __wl_get_peb(ubi);
+		if (pool->pebs[pool->size] < 0)
+			break;
+	}
+	pool->used = 0;
+}
+
+/**
+ * ubi_refill_pools - refills all fastmap PEB pools.
+ * @ubi: UBI device description object
+ */
+void ubi_refill_pools(struct ubi_device *ubi)
+{
+	spin_lock(&ubi->wl_lock);
+	refill_wl_pool(ubi);
+	refill_wl_user_pool(ubi);
+	spin_unlock(&ubi->wl_lock);
+}
+
+/* ubi_wl_get_peb - works exaclty like __wl_get_peb but keeps track of
+ * the fastmap pool.
+ */
+int ubi_wl_get_peb(struct ubi_device *ubi)
+{
+	int ret;
+	struct ubi_fm_pool *pool = &ubi->fm_pool;
+	struct ubi_fm_pool *wl_pool = &ubi->fm_wl_pool;
+
+	if (!pool->size || !wl_pool->size || pool->used == pool->size ||
+	    wl_pool->used == wl_pool->size)
+		ubi_update_fastmap(ubi);
+
+	/* we got not a single free PEB */
+	if (!pool->size)
+		ret = -ENOSPC;
+	else {
+		spin_lock(&ubi->wl_lock);
+		ret = pool->pebs[pool->used++];
+		prot_queue_add(ubi, ubi->lookuptbl[ret]);
+		spin_unlock(&ubi->wl_lock);
+	}
+
+	return ret;
+}
+
+/* get_peb_for_wl - returns a PEB to be used internally by the WL sub-system.
+ *
+ * @ubi: UBI device description object
+ */
+static struct ubi_wl_entry *get_peb_for_wl(struct ubi_device *ubi)
+{
+	struct ubi_fm_pool *pool = &ubi->fm_wl_pool;
+	int pnum;
+
+	if (pool->used == pool->size || !pool->size) {
+		/* We cannot update the fastmap here because this
+		 * function is called in atomic context.
+		 * Let's fail here and refill/update it as soon as possible. */
+		schedule_work(&ubi->fm_work);
+		return NULL;
+	} else {
+		pnum = pool->pebs[pool->used++];
+		return ubi->lookuptbl[pnum];
+	}
+}
+#else
+static struct ubi_wl_entry *get_peb_for_wl(struct ubi_device *ubi)
+{
+	struct ubi_wl_entry *e;
+
+	e = find_wl_entry(ubi, &ubi->free, WL_FREE_MAX_DIFF);
+	self_check_in_wl_tree(ubi, e, &ubi->free);
+	ubi->free_count--;
+	ubi_assert(ubi->free_count >= 0);
+	rb_erase(&e->u.rb, &ubi->free);
+
+	return e;
+}
+
+int ubi_wl_get_peb(struct ubi_device *ubi)
+{
+	int peb, err;
+
+	spin_lock(&ubi->wl_lock);
+	peb = __wl_get_peb(ubi);
 	spin_unlock(&ubi->wl_lock);
 
-	err = ubi_dbg_check_all_ff(ubi, e->pnum, ubi->vid_hdr_aloffset,
-				   ubi->peb_size - ubi->vid_hdr_aloffset);
+	if (peb < 0)
+		return peb;
+
+	err = ubi_self_check_all_ff(ubi, peb, ubi->vid_hdr_aloffset,
+				    ubi->peb_size - ubi->vid_hdr_aloffset);
 	if (err) {
-		ubi_err("new PEB %d does not contain all 0xFF bytes", e->pnum);
+		ubi_err("new PEB %d does not contain all 0xFF bytes", peb);
 		return err;
 	}
 
-	return e->pnum;
+	return peb;
 }
+#endif
 
 /**
  * prot_queue_del - remove a physical eraseblock from the protection queue.
@@ -486,7 +716,7 @@ static int prot_queue_del(struct ubi_device *ubi, int pnum)
 	if (!e)
 		return -ENODEV;
 
-	if (paranoid_check_in_pq(ubi, e))
+	if (self_check_in_pq(ubi, e))
 		return -ENODEV;
 
 	list_del(&e->u.list);
@@ -512,7 +742,7 @@ static int sync_erase(struct ubi_device *ubi, struct ubi_wl_entry *e,
 
 	dbg_wl("erase PEB %d, old EC %llu", e->pnum, ec);
 
-	err = paranoid_check_ec(ubi, e->pnum, e->ec);
+	err = self_check_ec(ubi, e->pnum, e->ec);
 	if (err)
 		return -EINVAL;
 
@@ -600,41 +830,72 @@ repeat:
 }
 
 /**
- * schedule_ubi_work - schedule a work.
+ * __schedule_ubi_work - schedule a work.
  * @ubi: UBI device description object
  * @wrk: the work to schedule
  *
  * This function adds a work defined by @wrk to the tail of the pending works
- * list.
+ * list. Can only be used of ubi->work_sem is already held in read mode!
  */
-static void schedule_ubi_work(struct ubi_device *ubi, struct ubi_work *wrk)
+static void __schedule_ubi_work(struct ubi_device *ubi, struct ubi_work *wrk)
 {
 	spin_lock(&ubi->wl_lock);
 	list_add_tail(&wrk->list, &ubi->works);
 	ubi_assert(ubi->works_count >= 0);
 	ubi->works_count += 1;
-	if (ubi->thread_enabled)
+	if (ubi->thread_enabled && !ubi_dbg_is_bgt_disabled(ubi))
 		wake_up_process(ubi->bgt_thread);
 	spin_unlock(&ubi->wl_lock);
 }
 
+/**
+ * schedule_ubi_work - schedule a work.
+ * @ubi: UBI device description object
+ * @wrk: the work to schedule
+ *
+ * This function adds a work defined by @wrk to the tail of the pending works
+ * list.
+ */
+static void schedule_ubi_work(struct ubi_device *ubi, struct ubi_work *wrk)
+{
+	down_read(&ubi->work_sem);
+	__schedule_ubi_work(ubi, wrk);
+	up_read(&ubi->work_sem);
+}
+
 static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk,
 			int cancel);
 
+#ifdef CONFIG_MTD_UBI_FASTMAP
+/**
+ * ubi_is_erase_work - checks whether a work is erase work.
+ * @wrk: The work object to be checked
+ */
+int ubi_is_erase_work(struct ubi_work *wrk)
+{
+	return wrk->func == erase_worker;
+}
+#endif
+
 /**
  * schedule_erase - schedule an erase work.
  * @ubi: UBI device description object
  * @e: the WL entry of the physical eraseblock to erase
+ * @vol_id: the volume ID that last used this PEB
+ * @lnum: the last used logical eraseblock number for the PEB
  * @torture: if the physical eraseblock has to be tortured
  *
  * This function returns zero in case of success and a %-ENOMEM in case of
  * failure.
  */
 static int schedule_erase(struct ubi_device *ubi, struct ubi_wl_entry *e,
-			  int torture)
+			  int vol_id, int lnum, int torture)
 {
 	struct ubi_work *wl_wrk;
 
+	ubi_assert(e);
+	ubi_assert(!ubi_is_fm_block(ubi, e->pnum));
+
 	dbg_wl("schedule erasure of PEB %d, EC %d, torture %d",
 	       e->pnum, e->ec, torture);
 
@@ -644,6 +905,8 @@ static int schedule_erase(struct ubi_device *ubi, struct ubi_wl_entry *e,
 
 	wl_wrk->func = &erase_worker;
 	wl_wrk->e = e;
+	wl_wrk->vol_id = vol_id;
+	wl_wrk->lnum = lnum;
 	wl_wrk->torture = torture;
 
 	schedule_ubi_work(ubi, wl_wrk);
@@ -651,6 +914,79 @@ static int schedule_erase(struct ubi_device *ubi, struct ubi_wl_entry *e,
 }
 
 /**
+ * do_sync_erase - run the erase worker synchronously.
+ * @ubi: UBI device description object
+ * @e: the WL entry of the physical eraseblock to erase
+ * @vol_id: the volume ID that last used this PEB
+ * @lnum: the last used logical eraseblock number for the PEB
+ * @torture: if the physical eraseblock has to be tortured
+ *
+ */
+static int do_sync_erase(struct ubi_device *ubi, struct ubi_wl_entry *e,
+			 int vol_id, int lnum, int torture)
+{
+	struct ubi_work *wl_wrk;
+
+	dbg_wl("sync erase of PEB %i", e->pnum);
+
+	wl_wrk = kmalloc(sizeof(struct ubi_work), GFP_NOFS);
+	if (!wl_wrk)
+		return -ENOMEM;
+
+	wl_wrk->e = e;
+	wl_wrk->vol_id = vol_id;
+	wl_wrk->lnum = lnum;
+	wl_wrk->torture = torture;
+
+	return erase_worker(ubi, wl_wrk, 0);
+}
+
+#ifdef CONFIG_MTD_UBI_FASTMAP
+/**
+ * ubi_wl_put_fm_peb - returns a PEB used in a fastmap to the wear-leveling
+ * sub-system.
+ * see: ubi_wl_put_peb()
+ *
+ * @ubi: UBI device description object
+ * @fm_e: physical eraseblock to return
+ * @lnum: the last used logical eraseblock number for the PEB
+ * @torture: if this physical eraseblock has to be tortured
+ */
+int ubi_wl_put_fm_peb(struct ubi_device *ubi, struct ubi_wl_entry *fm_e,
+		      int lnum, int torture)
+{
+	struct ubi_wl_entry *e;
+	int vol_id, pnum = fm_e->pnum;
+
+	dbg_wl("PEB %d", pnum);
+
+	ubi_assert(pnum >= 0);
+	ubi_assert(pnum < ubi->peb_count);
+
+	spin_lock(&ubi->wl_lock);
+	e = ubi->lookuptbl[pnum];
+
+	/* This can happen if we recovered from a fastmap the very
+	 * first time and writing now a new one. In this case the wl system
+	 * has never seen any PEB used by the original fastmap.
+	 */
+	if (!e) {
+		e = fm_e;
+		ubi_assert(e->ec >= 0);
+		ubi->lookuptbl[pnum] = e;
+	} else {
+		e->ec = fm_e->ec;
+		kfree(fm_e);
+	}
+
+	spin_unlock(&ubi->wl_lock);
+
+	vol_id = lnum ? UBI_FM_DATA_VOLUME_ID : UBI_FM_SB_VOLUME_ID;
+	return schedule_erase(ubi, e, vol_id, lnum, torture);
+}
+#endif
+
+/**
  * wear_leveling_worker - wear-leveling worker function.
  * @ubi: UBI device description object
  * @wrk: the work object
@@ -665,6 +1001,9 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk,
 {
 	int err, scrubbing = 0, torture = 0, protect = 0, erroneous = 0;
 	int vol_id = -1, uninitialized_var(lnum);
+#ifdef CONFIG_MTD_UBI_FASTMAP
+	int anchor = wrk->anchor;
+#endif
 	struct ubi_wl_entry *e1, *e2;
 	struct ubi_vid_hdr *vid_hdr;
 
@@ -698,21 +1037,46 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk,
 		goto out_cancel;
 	}
 
+#ifdef CONFIG_MTD_UBI_FASTMAP
+	/* Check whether we need to produce an anchor PEB */
+	if (!anchor)
+		anchor = !anchor_pebs_avalible(&ubi->free);
+
+	if (anchor) {
+		e1 = find_anchor_wl_entry(&ubi->used);
+		if (!e1)
+			goto out_cancel;
+		e2 = get_peb_for_wl(ubi);
+		if (!e2)
+			goto out_cancel;
+
+		self_check_in_wl_tree(ubi, e1, &ubi->used);
+		rb_erase(&e1->u.rb, &ubi->used);
+		dbg_wl("anchor-move PEB %d to PEB %d", e1->pnum, e2->pnum);
+	} else if (!ubi->scrub.rb_node) {
+#else
 	if (!ubi->scrub.rb_node) {
+#endif
 		/*
 		 * Now pick the least worn-out used physical eraseblock and a
 		 * highly worn-out free physical eraseblock. If the erase
 		 * counters differ much enough, start wear-leveling.
 		 */
 		e1 = rb_entry(rb_first(&ubi->used), struct ubi_wl_entry, u.rb);
-		e2 = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF);
+		e2 = get_peb_for_wl(ubi);
+		if (!e2)
+			goto out_cancel;
 
 		if (!(e2->ec - e1->ec >= UBI_WL_THRESHOLD)) {
 			dbg_wl("no WL needed: min used EC %d, max free EC %d",
 			       e1->ec, e2->ec);
+
+			/* Give the unused PEB back */
+			wl_tree_add(e2, &ubi->free);
+			ubi->free_count++;
 			goto out_cancel;
 		}
-		paranoid_check_in_wl_tree(e1, &ubi->used);
+		self_check_in_wl_tree(ubi, e1, &ubi->used);
 		rb_erase(&e1->u.rb, &ubi->used);
 		dbg_wl("move PEB %d EC %d to PEB %d EC %d",
 		       e1->pnum, e1->ec, e2->pnum, e2->ec);
@@ -720,14 +1084,15 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk,
 		/* Perform scrubbing */
 		scrubbing = 1;
 		e1 = rb_entry(rb_first(&ubi->scrub), struct ubi_wl_entry, u.rb);
-		e2 = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF);
-		paranoid_check_in_wl_tree(e1, &ubi->scrub);
+		e2 = get_peb_for_wl(ubi);
+		if (!e2)
+			goto out_cancel;
+
+		self_check_in_wl_tree(ubi, e1, &ubi->scrub);
 		rb_erase(&e1->u.rb, &ubi->scrub);
 		dbg_wl("scrub PEB %d to PEB %d", e1->pnum, e2->pnum);
 	}
 
-	paranoid_check_in_wl_tree(e2, &ubi->free);
-	rb_erase(&e2->u.rb, &ubi->free);
 	ubi->move_from = e1;
 	ubi->move_to = e2;
 	spin_unlock(&ubi->wl_lock);
@@ -745,7 +1110,7 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk,
 
 	err = ubi_io_read_vid_hdr(ubi, e1->pnum, vid_hdr, 0);
 	if (err && err != UBI_IO_BITFLIPS) {
-		if (err == UBI_IO_PEB_FREE) {
+		if (err == UBI_IO_FF) {
 			/*
 			 * We are trying to move PEB without a VID header. UBI
 			 * always write VID headers shortly after the PEB was
@@ -759,6 +1124,16 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk,
 			dbg_wl("PEB %d has no VID header", e1->pnum);
 			protect = 1;
 			goto out_not_moved;
+		} else if (err == UBI_IO_FF_BITFLIPS) {
+			/*
+			 * The same situation as %UBI_IO_FF, but bit-flips were
+			 * detected. It is better to schedule this PEB for
+			 * scrubbing.
+			 */
+			dbg_wl("PEB %d has no VID header but has bit-flips",
+			       e1->pnum);
+			scrubbing = 1;
+			goto out_not_moved;
 		}
 
 		ubi_err("error %d while reading VID header from PEB %d",
@@ -782,8 +1157,11 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk,
 			protect = 1;
 			goto out_not_moved;
 		}
-
-		if (err == MOVE_CANCEL_BITFLIPS || err == MOVE_TARGET_WR_ERR ||
+		if (err == MOVE_RETRY) {
+			scrubbing = 1;
+			goto out_not_moved;
+		}
+		if (err == MOVE_TARGET_BITFLIPS || err == MOVE_TARGET_WR_ERR ||
 		    err == MOVE_TARGET_RD_ERR) {
 			/*
 			 * Target PEB had bit-flips or write error - torture it.
@@ -831,7 +1209,7 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk,
 	ubi->move_to_put = ubi->wl_scheduled = 0;
 	spin_unlock(&ubi->wl_lock);
 
-	err = schedule_erase(ubi, e1, 0);
+	err = do_sync_erase(ubi, e1, vol_id, lnum, 0);
 	if (err) {
 		kmem_cache_free(ubi_wl_entry_slab, e1);
 		if (e2)
@@ -846,7 +1224,7 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk,
 		 */
 		dbg_wl("PEB %d (LEB %d:%d) was put meanwhile, erase",
 		       e2->pnum, vol_id, lnum);
-		err = schedule_erase(ubi, e2, 0);
+		err = do_sync_erase(ubi, e2, vol_id, lnum, 0);
 		if (err) {
 			kmem_cache_free(ubi_wl_entry_slab, e2);
 			goto out_ro;
@@ -885,7 +1263,7 @@ out_not_moved:
 	spin_unlock(&ubi->wl_lock);
 
 	ubi_free_vid_hdr(ubi, vid_hdr);
-	err = schedule_erase(ubi, e2, torture);
+	err = do_sync_erase(ubi, e2, vol_id, lnum, torture);
 	if (err) {
 		kmem_cache_free(ubi_wl_entry_slab, e2);
 		goto out_ro;
@@ -926,12 +1304,13 @@ out_cancel:
 /**
  * ensure_wear_leveling - schedule wear-leveling if it is needed.
  * @ubi: UBI device description object
+ * @nested: set to non-zero if this function is called from UBI worker
  *
  * This function checks if it is time to start wear-leveling and schedules it
  * if yes. This function returns zero in case of success and a negative error
  * code in case of failure.
  */
-static int ensure_wear_leveling(struct ubi_device *ubi)
+static int ensure_wear_leveling(struct ubi_device *ubi, int nested)
 {
 	int err = 0;
 	struct ubi_wl_entry *e1;
@@ -959,7 +1338,7 @@ static int ensure_wear_leveling(struct ubi_device *ubi)
 		 * %UBI_WL_THRESHOLD.
 		 */
 		e1 = rb_entry(rb_first(&ubi->used), struct ubi_wl_entry, u.rb);
-		e2 = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF);
+		e2 = find_wl_entry(ubi, &ubi->free, WL_FREE_MAX_DIFF);
 
 		if (!(e2->ec - e1->ec >= UBI_WL_THRESHOLD))
 			goto out_unlock;
@@ -976,8 +1355,12 @@ static int ensure_wear_leveling(struct ubi_device *ubi)
 		goto out_cancel;
 	}
 
+	wrk->anchor = 0;
 	wrk->func = &wear_leveling_worker;
-	schedule_ubi_work(ubi, wrk);
+	if (nested)
+		__schedule_ubi_work(ubi, wrk);
+	else
+		schedule_ubi_work(ubi, wrk);
 	return err;
 
 out_cancel:
@@ -988,6 +1371,38 @@ out_unlock:
 	return err;
 }
 
+#ifdef CONFIG_MTD_UBI_FASTMAP
+/**
+ * ubi_ensure_anchor_pebs - schedule wear-leveling to produce an anchor PEB.
+ * @ubi: UBI device description object
+ */
+int ubi_ensure_anchor_pebs(struct ubi_device *ubi)
+{
+	struct ubi_work *wrk;
+
+	spin_lock(&ubi->wl_lock);
+	if (ubi->wl_scheduled) {
+		spin_unlock(&ubi->wl_lock);
+		return 0;
+	}
+	ubi->wl_scheduled = 1;
+	spin_unlock(&ubi->wl_lock);
+
+	wrk = kmalloc(sizeof(struct ubi_work), GFP_NOFS);
+	if (!wrk) {
+		spin_lock(&ubi->wl_lock);
+		ubi->wl_scheduled = 0;
+		spin_unlock(&ubi->wl_lock);
+		return -ENOMEM;
+	}
+
+	wrk->anchor = 1;
+	wrk->func = &wear_leveling_worker;
+	schedule_ubi_work(ubi, wrk);
+	return 0;
+}
+#endif
+
 /**
  * erase_worker - physical eraseblock erase worker function.
  * @ubi: UBI device description object
@@ -1003,7 +1418,10 @@ static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk,
 			int cancel)
 {
 	struct ubi_wl_entry *e = wl_wrk->e;
-	int pnum = e->pnum, err, need;
+	int pnum = e->pnum;
+	int vol_id = wl_wrk->vol_id;
+	int lnum = wl_wrk->lnum;
+	int err, available_consumed = 0;
 
 	if (cancel) {
 		dbg_wl("cancel erasure of PEB %d EC %d", pnum, e->ec);
@@ -1012,7 +1430,10 @@ static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk,
 		return 0;
 	}
 
-	dbg_wl("erase PEB %d EC %d", pnum, e->ec);
+	dbg_wl("erase PEB %d EC %d LEB %d:%d",
+	       pnum, e->ec, wl_wrk->vol_id, wl_wrk->lnum);
+
+	ubi_assert(!ubi_is_fm_block(ubi, e->pnum));
 
 	err = sync_erase(ubi, e, wl_wrk->torture);
 	if (!err) {
@@ -1021,6 +1442,7 @@ static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk,
 
 		spin_lock(&ubi->wl_lock);
 		wl_tree_add(e, &ubi->free);
+		ubi->free_count++;
 		spin_unlock(&ubi->wl_lock);
 
 		/*
@@ -1030,33 +1452,34 @@ static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk,
 		serve_prot_queue(ubi);
 
 		/* And take care about wear-leveling */
-		err = ensure_wear_leveling(ubi);
+		err = ensure_wear_leveling(ubi, 1);
 		return err;
 	}
 
 	ubi_err("failed to erase PEB %d, error %d", pnum, err);
 	kfree(wl_wrk);
-	kmem_cache_free(ubi_wl_entry_slab, e);
 
 	if (err == -EINTR || err == -ENOMEM || err == -EAGAIN ||
 	    err == -EBUSY) {
 		int err1;
 
 		/* Re-schedule the LEB for erasure */
-		err1 = schedule_erase(ubi, e, 0);
+		err1 = schedule_erase(ubi, e, vol_id, lnum, 0);
 		if (err1) {
 			err = err1;
 			goto out_ro;
 		}
 		return err;
-	} else if (err != -EIO) {
+	}
+
+	kmem_cache_free(ubi_wl_entry_slab, e);
+	if (err != -EIO)
 		/*
 		 * If this is not %-EIO, we have no idea what to do. Scheduling
 		 * this physical eraseblock for erasure again would cause
 		 * errors again and again. Well, lets switch to R/O mode.
 		 */
 		goto out_ro;
-	}
 
 	/* It is %-EIO, the PEB went bad */
 
@@ -1066,20 +1489,14 @@ static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk,
 	}
 
 	spin_lock(&ubi->volumes_lock);
-	need = ubi->beb_rsvd_level - ubi->beb_rsvd_pebs + 1;
-	if (need > 0) {
-		need = ubi->avail_pebs >= need ? need : ubi->avail_pebs;
-		ubi->avail_pebs -= need;
-		ubi->rsvd_pebs += need;
-		ubi->beb_rsvd_pebs += need;
-		if (need > 0)
-			ubi_msg("reserve more %d PEBs", need);
-	}
-
 	if (ubi->beb_rsvd_pebs == 0) {
-		spin_unlock(&ubi->volumes_lock);
-		ubi_err("no reserved physical eraseblocks");
-		goto out_ro;
+		if (ubi->avail_pebs == 0) {
+			spin_unlock(&ubi->volumes_lock);
+			ubi_err("no reserved/available physical eraseblocks");
+			goto out_ro;
+		}
+		ubi->avail_pebs -= 1;
+		available_consumed = 1;
 	}
 	spin_unlock(&ubi->volumes_lock);
 
@@ -1089,19 +1506,36 @@ static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk,
 		goto out_ro;
 
 	spin_lock(&ubi->volumes_lock);
-	ubi->beb_rsvd_pebs -= 1;
+	if (ubi->beb_rsvd_pebs > 0) {
+		if (available_consumed) {
+			/*
+			 * The amount of reserved PEBs increased since we last
+			 * checked.
+			 */
+			ubi->avail_pebs += 1;
+			available_consumed = 0;
+		}
+		ubi->beb_rsvd_pebs -= 1;
+	}
 	ubi->bad_peb_count += 1;
 	ubi->good_peb_count -= 1;
 	ubi_calculate_reserved(ubi);
-	if (ubi->beb_rsvd_pebs)
+	if (available_consumed)
+		ubi_warn("no PEBs in the reserved pool, used an available PEB");
+	else if (ubi->beb_rsvd_pebs)
 		ubi_msg("%d PEBs left in the reserve", ubi->beb_rsvd_pebs);
 	else
-		ubi_warn("last PEB from the reserved pool was used");
+		ubi_warn("last PEB from the reserve was used");
 	spin_unlock(&ubi->volumes_lock);
 
 	return err;
 
 out_ro:
+	if (available_consumed) {
+		spin_lock(&ubi->volumes_lock);
+		ubi->avail_pebs += 1;
+		spin_unlock(&ubi->volumes_lock);
+	}
 	ubi_ro_mode(ubi);
 	return err;
 }
@@ -1109,6 +1543,8 @@ out_ro:
 /**
  * ubi_wl_put_peb - return a PEB to the wear-leveling sub-system.
  * @ubi: UBI device description object
+ * @vol_id: the volume ID that last used this PEB
+ * @lnum: the last used logical eraseblock number for the PEB
  * @pnum: physical eraseblock to return
  * @torture: if this physical eraseblock has to be tortured
  *
@@ -1117,7 +1553,8 @@ out_ro:
  * occurred to this @pnum and it has to be tested. This function returns zero
  * in case of success, and a negative error code in case of failure.
  */
-int ubi_wl_put_peb(struct ubi_device *ubi, int pnum, int torture)
+int ubi_wl_put_peb(struct ubi_device *ubi, int vol_id, int lnum,
+		   int pnum, int torture)
 {
 	int err;
 	struct ubi_wl_entry *e;
@@ -1159,13 +1596,13 @@ retry:
 		return 0;
 	} else {
 		if (in_wl_tree(e, &ubi->used)) {
-			paranoid_check_in_wl_tree(e, &ubi->used);
+			self_check_in_wl_tree(ubi, e, &ubi->used);
 			rb_erase(&e->u.rb, &ubi->used);
 		} else if (in_wl_tree(e, &ubi->scrub)) {
-			paranoid_check_in_wl_tree(e, &ubi->scrub);
+			self_check_in_wl_tree(ubi, e, &ubi->scrub);
 			rb_erase(&e->u.rb, &ubi->scrub);
 		} else if (in_wl_tree(e, &ubi->erroneous)) {
-			paranoid_check_in_wl_tree(e, &ubi->erroneous);
+			self_check_in_wl_tree(ubi, e, &ubi->erroneous);
 			rb_erase(&e->u.rb, &ubi->erroneous);
 			ubi->erroneous_peb_count -= 1;
 			ubi_assert(ubi->erroneous_peb_count >= 0);
@@ -1183,7 +1620,7 @@ retry:
 	}
 	spin_unlock(&ubi->wl_lock);
 
-	err = schedule_erase(ubi, e, torture);
+	err = schedule_erase(ubi, e, vol_id, lnum, torture);
 	if (err) {
 		spin_lock(&ubi->wl_lock);
 		wl_tree_add(e, &ubi->used);
@@ -1207,12 +1644,13 @@ int ubi_wl_scrub_peb(struct ubi_device *ubi, int pnum)
 {
 	struct ubi_wl_entry *e;
 
-	dbg_msg("schedule PEB %d for scrubbing", pnum);
+	ubi_msg("schedule PEB %d for scrubbing", pnum);
 
 retry:
 	spin_lock(&ubi->wl_lock);
 	e = ubi->lookuptbl[pnum];
-	if (e == ubi->move_from || in_wl_tree(e, &ubi->scrub)) {
+	if (e == ubi->move_from || in_wl_tree(e, &ubi->scrub) ||
+				   in_wl_tree(e, &ubi->erroneous)) {
 		spin_unlock(&ubi->wl_lock);
 		return 0;
 	}
@@ -1231,7 +1669,7 @@ retry:
 	}
 
 	if (in_wl_tree(e, &ubi->used)) {
-		paranoid_check_in_wl_tree(e, &ubi->used);
+		self_check_in_wl_tree(ubi, e, &ubi->used);
 		rb_erase(&e->u.rb, &ubi->used);
 	} else {
 		int err;
@@ -1252,29 +1690,60 @@ retry:
 	 * Technically scrubbing is the same as wear-leveling, so it is done
 	 * by the WL worker.
 	 */
-	return ensure_wear_leveling(ubi);
+	return ensure_wear_leveling(ubi, 0);
 }
 
 /**
  * ubi_wl_flush - flush all pending works.
  * @ubi: UBI device description object
+ * @vol_id: the volume id to flush for
+ * @lnum: the logical eraseblock number to flush for
  *
- * This function returns zero in case of success and a negative error code in
- * case of failure.
+ * This function executes all pending works for a particular volume id /
+ * logical eraseblock number pair. If either value is set to %UBI_ALL, then it
+ * acts as a wildcard for all of the corresponding volume numbers or logical
+ * eraseblock numbers. It returns zero in case of success and a negative error
+ * code in case of failure.
  */
-int ubi_wl_flush(struct ubi_device *ubi)
+int ubi_wl_flush(struct ubi_device *ubi, int vol_id, int lnum)
 {
-	int err;
+	int err = 0;
+	int found = 1;
 
 	/*
 	 * Erase while the pending works queue is not empty, but not more than
 	 * the number of currently pending works.
 	 */
-	dbg_wl("flush (%d pending works)", ubi->works_count);
-	while (ubi->works_count) {
-		err = do_work(ubi);
-		if (err)
-			return err;
+	dbg_wl("flush pending work for LEB %d:%d (%d pending works)",
+	       vol_id, lnum, ubi->works_count);
+
+	while (found) {
+		struct ubi_work *wrk;
+		found = 0;
+
+		down_read(&ubi->work_sem);
+		spin_lock(&ubi->wl_lock);
+		list_for_each_entry(wrk, &ubi->works, list) {
+			if ((vol_id == UBI_ALL || wrk->vol_id == vol_id) &&
+			    (lnum == UBI_ALL || wrk->lnum == lnum)) {
+				list_del(&wrk->list);
+				ubi->works_count -= 1;
+				ubi_assert(ubi->works_count >= 0);
+				spin_unlock(&ubi->wl_lock);
+
+				err = wrk->func(ubi, wrk, 0);
+				if (err) {
+					up_read(&ubi->work_sem);
+					return err;
+				}
+
+				spin_lock(&ubi->wl_lock);
+				found = 1;
+				break;
+			}
+		}
+		spin_unlock(&ubi->wl_lock);
+		up_read(&ubi->work_sem);
 	}
 
 	/*
@@ -1284,18 +1753,7 @@ int ubi_wl_flush(struct ubi_device *ubi)
 	down_write(&ubi->work_sem);
 	up_write(&ubi->work_sem);
 
-	/*
-	 * And in case last was the WL worker and it canceled the LEB
-	 * movement, flush again.
-	 */
-	while (ubi->works_count) {
-		dbg_wl("flush more (%d pending works)", ubi->works_count);
-		err = do_work(ubi);
-		if (err)
-			return err;
-	}
-
-	return 0;
+	return err;
 }
 
 /**
@@ -1353,7 +1811,7 @@ int ubi_thread(void *u)
 
 		spin_lock(&ubi->wl_lock);
 		if (list_empty(&ubi->works) || ubi->ro_mode ||
-			       !ubi->thread_enabled) {
+		    !ubi->thread_enabled || ubi_dbg_is_bgt_disabled(ubi)) {
 			set_current_state(TASK_INTERRUPTIBLE);
 			spin_unlock(&ubi->wl_lock);
 			schedule();
@@ -1404,27 +1862,30 @@ static void cancel_pending(struct ubi_device *ubi)
 }
 
 /**
- * ubi_wl_init_scan - initialize the WL sub-system using scanning information.
+ * ubi_wl_init - initialize the WL sub-system using attaching information.
  * @ubi: UBI device description object
- * @si: scanning information
+ * @ai: attaching information
  *
  * This function returns zero in case of success, and a negative error code in
  * case of failure.
  */
-int ubi_wl_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
+int ubi_wl_init(struct ubi_device *ubi, struct ubi_attach_info *ai)
 {
-	int err, i;
+	int err, i, reserved_pebs, found_pebs = 0;
 	struct rb_node *rb1, *rb2;
-	struct ubi_scan_volume *sv;
-	struct ubi_scan_leb *seb, *tmp;
+	struct ubi_ainf_volume *av;
+	struct ubi_ainf_peb *aeb, *tmp;
 	struct ubi_wl_entry *e;
 
 	ubi->used = ubi->erroneous = ubi->free = ubi->scrub = RB_ROOT;
 	spin_lock_init(&ubi->wl_lock);
 	mutex_init(&ubi->move_mutex);
 	init_rwsem(&ubi->work_sem);
-	ubi->max_ec = si->max_ec;
+	ubi->max_ec = ai->max_ec;
 	INIT_LIST_HEAD(&ubi->works);
+#ifdef CONFIG_MTD_UBI_FASTMAP
+	INIT_WORK(&ubi->fm_work, update_fastmap_work_fn);
+#endif
 
 	sprintf(ubi->bgt_name, UBI_BGT_NAME_PATTERN, ubi->ubi_num);
 
@@ -1437,64 +1898,59 @@ int ubi_wl_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
 		INIT_LIST_HEAD(&ubi->pq[i]);
 	ubi->pq_head = 0;
 
-	list_for_each_entry_safe(seb, tmp, &si->erase, u.list) {
+	list_for_each_entry_safe(aeb, tmp, &ai->erase, u.list) {
 		cond_resched();
 
 		e = kmem_cache_alloc(ubi_wl_entry_slab, GFP_KERNEL);
 		if (!e)
 			goto out_free;
 
-		e->pnum = seb->pnum;
-		e->ec = seb->ec;
+		e->pnum = aeb->pnum;
+		e->ec = aeb->ec;
+		ubi_assert(!ubi_is_fm_block(ubi, e->pnum));
 		ubi->lookuptbl[e->pnum] = e;
-		if (schedule_erase(ubi, e, 0)) {
+		if (schedule_erase(ubi, e, aeb->vol_id, aeb->lnum, 0)) {
 			kmem_cache_free(ubi_wl_entry_slab, e);
 			goto out_free;
 		}
+
+		found_pebs++;
 	}
 
-	list_for_each_entry(seb, &si->free, u.list) {
+	ubi->free_count = 0;
+	list_for_each_entry(aeb, &ai->free, u.list) {
 		cond_resched();
 
 		e = kmem_cache_alloc(ubi_wl_entry_slab, GFP_KERNEL);
 		if (!e)
 			goto out_free;
 
-		e->pnum = seb->pnum;
-		e->ec = seb->ec;
+		e->pnum = aeb->pnum;
+		e->ec = aeb->ec;
 		ubi_assert(e->ec >= 0);
-		wl_tree_add(e, &ubi->free);
-		ubi->lookuptbl[e->pnum] = e;
-	}
-
-	list_for_each_entry(seb, &si->corr, u.list) {
-		cond_resched();
+		ubi_assert(!ubi_is_fm_block(ubi, e->pnum));
 
-		e = kmem_cache_alloc(ubi_wl_entry_slab, GFP_KERNEL);
-		if (!e)
-			goto out_free;
+		wl_tree_add(e, &ubi->free);
+		ubi->free_count++;
 
-		e->pnum = seb->pnum;
-		e->ec = seb->ec;
 		ubi->lookuptbl[e->pnum] = e;
-		if (schedule_erase(ubi, e, 0)) {
-			kmem_cache_free(ubi_wl_entry_slab, e);
-			goto out_free;
-		}
+
+		found_pebs++;
 	}
 
-	ubi_rb_for_each_entry(rb1, sv, &si->volumes, rb) {
-		ubi_rb_for_each_entry(rb2, seb, &sv->root, u.rb) {
+	ubi_rb_for_each_entry(rb1, av, &ai->volumes, rb) {
+		ubi_rb_for_each_entry(rb2, aeb, &av->root, u.rb) {
 			cond_resched();
 
 			e = kmem_cache_alloc(ubi_wl_entry_slab, GFP_KERNEL);
 			if (!e)
 				goto out_free;
 
-			e->pnum = seb->pnum;
-			e->ec = seb->ec;
+			e->pnum = aeb->pnum;
+			e->ec = aeb->ec;
 			ubi->lookuptbl[e->pnum] = e;
-			if (!seb->scrub) {
+
+			if (!aeb->scrub) {
 				dbg_wl("add PEB %d EC %d to the used tree",
 				       e->pnum, e->ec);
 				wl_tree_add(e, &ubi->used);
@@ -1503,19 +1959,38 @@ int ubi_wl_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
 				       e->pnum, e->ec);
 				wl_tree_add(e, &ubi->scrub);
 			}
+
+			found_pebs++;
 		}
 	}
 
-	if (ubi->avail_pebs < WL_RESERVED_PEBS) {
+	dbg_wl("found %i PEBs", found_pebs);
+
+	if (ubi->fm)
+		ubi_assert(ubi->good_peb_count == \
+			   found_pebs + ubi->fm->used_blocks);
+	else
+		ubi_assert(ubi->good_peb_count == found_pebs);
+
+	reserved_pebs = WL_RESERVED_PEBS;
+#ifdef CONFIG_MTD_UBI_FASTMAP
+	/* Reserve enough LEBs to store two fastmaps. */
+	reserved_pebs += (ubi->fm_size / ubi->leb_size) * 2;
+#endif
+
+	if (ubi->avail_pebs < reserved_pebs) {
 		ubi_err("no enough physical eraseblocks (%d, need %d)",
-			ubi->avail_pebs, WL_RESERVED_PEBS);
+			ubi->avail_pebs, reserved_pebs);
+		if (ubi->corr_peb_count)
+			ubi_err("%d PEBs are corrupted and not used",
+				ubi->corr_peb_count);
 		goto out_free;
 	}
-	ubi->avail_pebs -= WL_RESERVED_PEBS;
-	ubi->rsvd_pebs += WL_RESERVED_PEBS;
+	ubi->avail_pebs -= reserved_pebs;
+	ubi->rsvd_pebs += reserved_pebs;
 
 	/* Schedule wear-leveling if needed */
-	err = ensure_wear_leveling(ubi);
+	err = ensure_wear_leveling(ubi, 0);
 	if (err)
 		goto out_free;
 
@@ -1563,23 +2038,25 @@ void ubi_wl_close(struct ubi_device *ubi)
 	kfree(ubi->lookuptbl);
 }
 
-#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
-
 /**
- * paranoid_check_ec - make sure that the erase counter of a PEB is correct.
+ * self_check_ec - make sure that the erase counter of a PEB is correct.
  * @ubi: UBI device description object
  * @pnum: the physical eraseblock number to check
  * @ec: the erase counter to check
  *
  * This function returns zero if the erase counter of physical eraseblock @pnum
- * is equivalent to @ec, and a negative error code if not or if an error occurred.
+ * is equivalent to @ec, and a negative error code if not or if an error
+ * occurred.
  */
-static int paranoid_check_ec(struct ubi_device *ubi, int pnum, int ec)
+static int self_check_ec(struct ubi_device *ubi, int pnum, int ec)
 {
 	int err;
 	long long read_ec;
 	struct ubi_ec_hdr *ec_hdr;
 
+	if (!ubi_dbg_chk_gen(ubi))
+		return 0;
+
 	ec_hdr = kzalloc(ubi->ec_hdr_alsize, GFP_NOFS);
 	if (!ec_hdr)
 		return -ENOMEM;
@@ -1592,10 +2069,10 @@ static int paranoid_check_ec(struct ubi_device *ubi, int pnum, int ec)
 	}
 
 	read_ec = be64_to_cpu(ec_hdr->ec);
-	if (ec != read_ec) {
-		ubi_err("paranoid check failed for PEB %d", pnum);
+	if (ec != read_ec && read_ec - ec > 1) {
+		ubi_err("self-check failed for PEB %d", pnum);
 		ubi_err("read EC is %lld, should be %d", read_ec, ec);
-		ubi_dbg_dump_stack();
+		dump_stack();
 		err = 1;
 	} else
 		err = 0;
@@ -1606,46 +2083,53 @@ out_free:
 }
 
 /**
- * paranoid_check_in_wl_tree - check that wear-leveling entry is in WL RB-tree.
+ * self_check_in_wl_tree - check that wear-leveling entry is in WL RB-tree.
+ * @ubi: UBI device description object
  * @e: the wear-leveling entry to check
  * @root: the root of the tree
  *
  * This function returns zero if @e is in the @root RB-tree and %-EINVAL if it
  * is not.
  */
-static int paranoid_check_in_wl_tree(struct ubi_wl_entry *e,
-				     struct rb_root *root)
+static int self_check_in_wl_tree(const struct ubi_device *ubi,
+				 struct ubi_wl_entry *e, struct rb_root *root)
 {
+	if (!ubi_dbg_chk_gen(ubi))
+		return 0;
+
 	if (in_wl_tree(e, root))
 		return 0;
 
-	ubi_err("paranoid check failed for PEB %d, EC %d, RB-tree %p ",
+	ubi_err("self-check failed for PEB %d, EC %d, RB-tree %p ",
 		e->pnum, e->ec, root);
-	ubi_dbg_dump_stack();
+	dump_stack();
 	return -EINVAL;
 }
 
 /**
- * paranoid_check_in_pq - check if wear-leveling entry is in the protection
+ * self_check_in_pq - check if wear-leveling entry is in the protection
  *                        queue.
  * @ubi: UBI device description object
  * @e: the wear-leveling entry to check
  *
  * This function returns zero if @e is in @ubi->pq and %-EINVAL if it is not.
  */
-static int paranoid_check_in_pq(struct ubi_device *ubi, struct ubi_wl_entry *e)
+static int self_check_in_pq(const struct ubi_device *ubi,
+			    struct ubi_wl_entry *e)
 {
 	struct ubi_wl_entry *p;
 	int i;
 
+	if (!ubi_dbg_chk_gen(ubi))
+		return 0;
+
 	for (i = 0; i < UBI_PROT_QUEUE_LEN; ++i)
 		list_for_each_entry(p, &ubi->pq[i], u.list)
 			if (p == e)
 				return 0;
 
-	ubi_err("paranoid check failed for PEB %d, EC %d, Protect queue",
+	ubi_err("self-check failed for PEB %d, EC %d, Protect queue",
 		e->pnum, e->ec);
-	ubi_dbg_dump_stack();
+	dump_stack();
 	return -EINVAL;
 }
-#endif /* CONFIG_MTD_UBI_DEBUG_PARANOID */