diff options
Diffstat (limited to 'drivers/mtd')
141 files changed, 8879 insertions, 3560 deletions
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index 5fab4e6e830..94b821042d9 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -150,17 +150,18 @@ config MTD_BCM63XX_PARTS config MTD_BCM47XX_PARTS tristate "BCM47XX partitioning support" - depends on BCM47XX + depends on BCM47XX || ARCH_BCM_5301X help This provides partitions parser for devices based on BCM47xx boards. comment "User Modules And Translation Layers" +# +# MTD block device support is select'ed if needed +# config MTD_BLKDEVS - tristate "Common interface to block layer for MTD 'translation layers'" - depends on BLOCK - default n + tristate config MTD_BLOCK tristate "Caching block device access to MTD devices" @@ -320,6 +321,8 @@ source "drivers/mtd/onenand/Kconfig" source "drivers/mtd/lpddr/Kconfig" +source "drivers/mtd/spi-nor/Kconfig" + source "drivers/mtd/ubi/Kconfig" endif # MTD diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile index 4cfb31e6c96..99bb9a1f6e1 100644 --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile @@ -32,4 +32,5 @@ inftl-objs := inftlcore.o inftlmount.o obj-y += chips/ lpddr/ maps/ devices/ nand/ onenand/ tests/ +obj-$(CONFIG_MTD_SPI_NOR) += spi-nor/ obj-$(CONFIG_MTD_UBI) += ubi/ diff --git a/drivers/mtd/afs.c b/drivers/mtd/afs.c index 5a3942bf109..96a33e3f7b0 100644 --- a/drivers/mtd/afs.c +++ b/drivers/mtd/afs.c @@ -264,7 +264,8 @@ static struct mtd_part_parser afs_parser = { static int __init afs_parser_init(void) { - return register_mtd_parser(&afs_parser); + register_mtd_parser(&afs_parser); + return 0; } static void __exit afs_parser_exit(void) diff --git a/drivers/mtd/ar7part.c b/drivers/mtd/ar7part.c index ddc0a4287a4..7c9172ad262 100644 --- a/drivers/mtd/ar7part.c +++ b/drivers/mtd/ar7part.c @@ -139,7 +139,8 @@ static struct mtd_part_parser ar7_parser = { static int __init ar7_parser_init(void) { - return register_mtd_parser(&ar7_parser); + register_mtd_parser(&ar7_parser); + return 0; } static void __exit ar7_parser_exit(void) diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c index 9279a9174f8..adfa74c1bc4 100644 --- a/drivers/mtd/bcm47xxpart.c +++ b/drivers/mtd/bcm47xxpart.c @@ -14,7 +14,6 @@ #include <linux/slab.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> -#include <bcm47xx_nvram.h> /* 10 parts were found on sflash on Netgear WNDR4500 */ #define BCM47XXPART_MAX_PARTS 12 @@ -23,15 +22,20 @@ * Amount of bytes we read when analyzing each block of flash memory. * Set it big enough to allow detecting partition and reading important data. */ -#define BCM47XXPART_BYTES_TO_READ 0x404 +#define BCM47XXPART_BYTES_TO_READ 0x4e8 /* Magics */ #define BOARD_DATA_MAGIC 0x5246504D /* MPFR */ +#define BOARD_DATA_MAGIC2 0xBD0D0BBD +#define CFE_MAGIC 0x43464531 /* 1EFC */ +#define FACTORY_MAGIC 0x59544346 /* FCTY */ +#define NVRAM_HEADER 0x48534C46 /* FLSH */ #define POT_MAGIC1 0x54544f50 /* POTT */ #define POT_MAGIC2 0x504f /* OP */ #define ML_MAGIC1 0x39685a42 #define ML_MAGIC2 0x26594131 #define TRX_MAGIC 0x30524448 +#define SQSH_MAGIC 0x71736873 /* shsq */ struct trx_header { uint32_t magic; @@ -71,7 +75,14 @@ static int bcm47xxpart_parse(struct mtd_info *master, /* Alloc */ parts = kzalloc(sizeof(struct mtd_partition) * BCM47XXPART_MAX_PARTS, GFP_KERNEL); + if (!parts) + return -ENOMEM; + buf = kzalloc(BCM47XXPART_BYTES_TO_READ, GFP_KERNEL); + if (!buf) { + kfree(parts); + return -ENOMEM; + } /* Parse block by block looking for magics */ for (offset = 0; offset <= master->size - blocksize; @@ -80,7 +91,7 @@ static int bcm47xxpart_parse(struct mtd_info *master, if (offset >= 0x2000000) break; - if (curr_part > BCM47XXPART_MAX_PARTS) { + if (curr_part >= BCM47XXPART_MAX_PARTS) { pr_warn("Reached maximum number of partitions, scanning stopped!\n"); break; } @@ -93,8 +104,9 @@ static int bcm47xxpart_parse(struct mtd_info *master, continue; } - /* CFE has small NVRAM at 0x400 */ - if (buf[0x400 / 4] == NVRAM_HEADER) { + /* Magic or small NVRAM at 0x400 */ + if ((buf[0x4e0 / 4] == CFE_MAGIC && buf[0x4e4 / 4] == CFE_MAGIC) || + (buf[0x400 / 4] == NVRAM_HEADER)) { bcm47xxpart_add_part(&parts[curr_part++], "boot", offset, MTD_WRITEABLE); continue; @@ -110,6 +122,13 @@ static int bcm47xxpart_parse(struct mtd_info *master, continue; } + /* Found on Huawei E970 */ + if (buf[0x000 / 4] == FACTORY_MAGIC) { + bcm47xxpart_add_part(&parts[curr_part++], "factory", + offset, MTD_WRITEABLE); + continue; + } + /* POT(TOP) */ if (buf[0x000 / 4] == POT_MAGIC1 && (buf[0x004 / 4] & 0xFFFF) == POT_MAGIC2) { @@ -128,6 +147,11 @@ static int bcm47xxpart_parse(struct mtd_info *master, /* TRX */ if (buf[0x000 / 4] == TRX_MAGIC) { + if (BCM47XXPART_MAX_PARTS - curr_part < 4) { + pr_warn("Not enough partitions left to register trx, scanning stopped!\n"); + break; + } + trx = (struct trx_header *)buf; trx_part = curr_part; @@ -167,11 +191,33 @@ static int bcm47xxpart_parse(struct mtd_info *master, offset = rounddown(offset + trx->length, blocksize); continue; } + + /* Squashfs on devices not using TRX */ + if (buf[0x000 / 4] == SQSH_MAGIC) { + bcm47xxpart_add_part(&parts[curr_part++], "rootfs", + offset, 0); + continue; + } + + /* Read middle of the block */ + if (mtd_read(master, offset + 0x8000, 0x4, + &bytes_read, (uint8_t *)buf) < 0) { + pr_err("mtd_read error while parsing (offset: 0x%X)!\n", + offset); + continue; + } + + /* Some devices (ex. WNDR3700v3) don't have a standard 'MPFR' */ + if (buf[0x000 / 4] == BOARD_DATA_MAGIC2) { + bcm47xxpart_add_part(&parts[curr_part++], "board_data", + offset, MTD_WRITEABLE); + continue; + } } /* Look for NVRAM at the end of the last block. */ for (i = 0; i < ARRAY_SIZE(possible_nvram_sizes); i++) { - if (curr_part > BCM47XXPART_MAX_PARTS) { + if (curr_part >= BCM47XXPART_MAX_PARTS) { pr_warn("Reached maximum number of partitions, scanning stopped!\n"); break; } @@ -220,7 +266,8 @@ static struct mtd_part_parser bcm47xxpart_mtd_parser = { static int __init bcm47xxpart_init(void) { - return register_mtd_parser(&bcm47xxpart_mtd_parser); + register_mtd_parser(&bcm47xxpart_mtd_parser); + return 0; } static void __exit bcm47xxpart_exit(void) diff --git a/drivers/mtd/bcm63xxpart.c b/drivers/mtd/bcm63xxpart.c index 5c813907661..b2443f7031c 100644 --- a/drivers/mtd/bcm63xxpart.c +++ b/drivers/mtd/bcm63xxpart.c @@ -221,7 +221,8 @@ static struct mtd_part_parser bcm63xx_cfe_parser = { static int __init bcm63xx_cfe_parser_init(void) { - return register_mtd_parser(&bcm63xx_cfe_parser); + register_mtd_parser(&bcm63xx_cfe_parser); + return 0; } static void __exit bcm63xx_cfe_parser_exit(void) diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig index e4696b37f3d..9f02c28c020 100644 --- a/drivers/mtd/chips/Kconfig +++ b/drivers/mtd/chips/Kconfig @@ -169,33 +169,33 @@ config MTD_OTP in the programming of OTP bits will waste them. config MTD_CFI_INTELEXT - tristate "Support for Intel/Sharp flash chips" + tristate "Support for CFI command set 0001 (Intel/Sharp chips)" depends on MTD_GEN_PROBE select MTD_CFI_UTIL help The Common Flash Interface defines a number of different command sets which a CFI-compliant chip may claim to implement. This code - provides support for one of those command sets, used on Intel - StrataFlash and other parts. + provides support for command set 0001, used on Intel StrataFlash + and other parts. config MTD_CFI_AMDSTD - tristate "Support for AMD/Fujitsu/Spansion flash chips" + tristate "Support for CFI command set 0002 (AMD/Fujitsu/Spansion chips)" depends on MTD_GEN_PROBE select MTD_CFI_UTIL help The Common Flash Interface defines a number of different command sets which a CFI-compliant chip may claim to implement. This code - provides support for one of those command sets, used on chips - including the AMD Am29LV320. + provides support for command set 0002, used on chips including + the AMD Am29LV320. config MTD_CFI_STAA - tristate "Support for ST (Advanced Architecture) flash chips" + tristate "Support for CFI command set 0020 (ST (Advanced Architecture) chips)" depends on MTD_GEN_PROBE select MTD_CFI_UTIL help The Common Flash Interface defines a number of different command sets which a CFI-compliant chip may claim to implement. This code - provides support for one of those command sets. + provides support for command set 0020. config MTD_CFI_UTIL tristate diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c index 77514430f1f..a7543ba3e19 100644 --- a/drivers/mtd/chips/cfi_cmdset_0001.c +++ b/drivers/mtd/chips/cfi_cmdset_0001.c @@ -21,7 +21,6 @@ #include <linux/types.h> #include <linux/kernel.h> #include <linux/sched.h> -#include <linux/init.h> #include <asm/io.h> #include <asm/byteorder.h> @@ -53,6 +52,11 @@ /* Atmel chips */ #define AT49BV640D 0x02de #define AT49BV640DT 0x02db +/* Sharp chips */ +#define LH28F640BFHE_PTTL90 0x00b0 +#define LH28F640BFHE_PBTL90 0x00b1 +#define LH28F640BFHE_PTTL70A 0x00b2 +#define LH28F640BFHE_PBTL70A 0x00b3 static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); @@ -69,10 +73,10 @@ static int cfi_intelext_read_fact_prot_reg (struct mtd_info *, loff_t, size_t, s static int cfi_intelext_read_user_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *); static int cfi_intelext_write_user_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *); static int cfi_intelext_lock_user_prot_reg (struct mtd_info *, loff_t, size_t); -static int cfi_intelext_get_fact_prot_info (struct mtd_info *, - struct otp_info *, size_t); -static int cfi_intelext_get_user_prot_info (struct mtd_info *, - struct otp_info *, size_t); +static int cfi_intelext_get_fact_prot_info(struct mtd_info *, size_t, + size_t *, struct otp_info *); +static int cfi_intelext_get_user_prot_info(struct mtd_info *, size_t, + size_t *, struct otp_info *); #endif static int cfi_intelext_suspend (struct mtd_info *); static void cfi_intelext_resume (struct mtd_info *); @@ -259,6 +263,36 @@ static void fixup_st_m28w320cb(struct mtd_info *mtd) (cfi->cfiq->EraseRegionInfo[1] & 0xffff0000) | 0x3e; }; +static int is_LH28F640BF(struct cfi_private *cfi) +{ + /* Sharp LH28F640BF Family */ + if (cfi->mfr == CFI_MFR_SHARP && ( + cfi->id == LH28F640BFHE_PTTL90 || cfi->id == LH28F640BFHE_PBTL90 || + cfi->id == LH28F640BFHE_PTTL70A || cfi->id == LH28F640BFHE_PBTL70A)) + return 1; + return 0; +} + +static void fixup_LH28F640BF(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + struct cfi_pri_intelext *extp = cfi->cmdset_priv; + + /* Reset the Partition Configuration Register on LH28F640BF + * to a single partition (PCR = 0x000): PCR is embedded into A0-A15. */ + if (is_LH28F640BF(cfi)) { + printk(KERN_INFO "Reset Partition Config. Register: 1 Partition of 4 planes\n"); + map_write(map, CMD(0x60), 0); + map_write(map, CMD(0x04), 0); + + /* We have set one single partition thus + * Simultaneous Operations are not allowed */ + printk(KERN_INFO "cfi_cmdset_0001: Simultaneous Operations disabled\n"); + extp->FeatureSupport &= ~512; + } +} + static void fixup_use_point(struct mtd_info *mtd) { struct map_info *map = mtd->priv; @@ -310,6 +344,8 @@ static struct cfi_fixup cfi_fixup_table[] = { { CFI_MFR_ST, 0x00ba, /* M28W320CT */ fixup_st_m28w320ct }, { CFI_MFR_ST, 0x00bb, /* M28W320CB */ fixup_st_m28w320cb }, { CFI_MFR_INTEL, CFI_ID_ANY, fixup_unlock_powerup_lock }, + { CFI_MFR_SHARP, CFI_ID_ANY, fixup_unlock_powerup_lock }, + { CFI_MFR_SHARP, CFI_ID_ANY, fixup_LH28F640BF }, { 0, 0, NULL } }; @@ -435,10 +471,8 @@ struct mtd_info *cfi_cmdset_0001(struct map_info *map, int primary) int i; mtd = kzalloc(sizeof(*mtd), GFP_KERNEL); - if (!mtd) { - printk(KERN_ERR "Failed to allocate memory for MTD device\n"); + if (!mtd) return NULL; - } mtd->priv = map; mtd->type = MTD_NORFLASH; @@ -564,10 +598,8 @@ static struct mtd_info *cfi_intelext_setup(struct mtd_info *mtd) mtd->numeraseregions = cfi->cfiq->NumEraseRegions * cfi->numchips; mtd->eraseregions = kmalloc(sizeof(struct mtd_erase_region_info) * mtd->numeraseregions, GFP_KERNEL); - if (!mtd->eraseregions) { - printk(KERN_ERR "Failed to allocate memory for MTD erase region info\n"); + if (!mtd->eraseregions) goto setup_err; - } for (i=0; i<cfi->cfiq->NumEraseRegions; i++) { unsigned long ernum, ersize; @@ -1654,6 +1686,12 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, initial_adr = adr; cmd_adr = adr & ~(wbufsize-1); + /* Sharp LH28F640BF chips need the first address for the + * Page Buffer Program command. See Table 5 of + * LH28F320BF, LH28F640BF, LH28F128BF Series (Appendix FUM00701) */ + if (is_LH28F640BF(cfi)) + cmd_adr = adr; + /* Let's determine this according to the interleave only once */ write_cmd = (cfi->cfiq->P_ID != P_ID_INTEL_PERFORMANCE) ? CMD(0xe8) : CMD(0xe9); @@ -2399,24 +2437,19 @@ static int cfi_intelext_lock_user_prot_reg(struct mtd_info *mtd, NULL, do_otp_lock, 1); } -static int cfi_intelext_get_fact_prot_info(struct mtd_info *mtd, - struct otp_info *buf, size_t len) -{ - size_t retlen; - int ret; +static int cfi_intelext_get_fact_prot_info(struct mtd_info *mtd, size_t len, + size_t *retlen, struct otp_info *buf) - ret = cfi_intelext_otp_walk(mtd, 0, len, &retlen, (u_char *)buf, NULL, 0); - return ret ? : retlen; +{ + return cfi_intelext_otp_walk(mtd, 0, len, retlen, (u_char *)buf, + NULL, 0); } -static int cfi_intelext_get_user_prot_info(struct mtd_info *mtd, - struct otp_info *buf, size_t len) +static int cfi_intelext_get_user_prot_info(struct mtd_info *mtd, size_t len, + size_t *retlen, struct otp_info *buf) { - size_t retlen; - int ret; - - ret = cfi_intelext_otp_walk(mtd, 0, len, &retlen, (u_char *)buf, NULL, 1); - return ret ? : retlen; + return cfi_intelext_otp_walk(mtd, 0, len, retlen, (u_char *)buf, + NULL, 1); } #endif diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index 89b9d689153..e21fde9d4d7 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -24,7 +24,6 @@ #include <linux/types.h> #include <linux/kernel.h> #include <linux/sched.h> -#include <linux/init.h> #include <asm/io.h> #include <asm/byteorder.h> @@ -507,10 +506,8 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary) int i; mtd = kzalloc(sizeof(*mtd), GFP_KERNEL); - if (!mtd) { - printk(KERN_WARNING "Failed to allocate memory for MTD device\n"); + if (!mtd) return NULL; - } mtd->priv = map; mtd->type = MTD_NORFLASH; @@ -661,10 +658,8 @@ static struct mtd_info *cfi_amdstd_setup(struct mtd_info *mtd) mtd->numeraseregions = cfi->cfiq->NumEraseRegions * cfi->numchips; mtd->eraseregions = kmalloc(sizeof(struct mtd_erase_region_info) * mtd->numeraseregions, GFP_KERNEL); - if (!mtd->eraseregions) { - printk(KERN_WARNING "Failed to allocate memory for MTD erase region info\n"); + if (!mtd->eraseregions) goto setup_err; - } for (i=0; i<cfi->cfiq->NumEraseRegions; i++) { unsigned long ernum, ersize; diff --git a/drivers/mtd/chips/cfi_cmdset_0020.c b/drivers/mtd/chips/cfi_cmdset_0020.c index 096993f9711..423666b51ef 100644 --- a/drivers/mtd/chips/cfi_cmdset_0020.c +++ b/drivers/mtd/chips/cfi_cmdset_0020.c @@ -22,7 +22,6 @@ #include <linux/types.h> #include <linux/kernel.h> #include <linux/sched.h> -#include <linux/init.h> #include <asm/io.h> #include <asm/byteorder.h> @@ -176,7 +175,6 @@ static struct mtd_info *cfi_staa_setup(struct map_info *map) //printk(KERN_DEBUG "number of CFI chips: %d\n", cfi->numchips); if (!mtd) { - printk(KERN_ERR "Failed to allocate memory for MTD device\n"); kfree(cfi->cmdset_priv); return NULL; } @@ -189,7 +187,6 @@ static struct mtd_info *cfi_staa_setup(struct map_info *map) mtd->eraseregions = kmalloc(sizeof(struct mtd_erase_region_info) * mtd->numeraseregions, GFP_KERNEL); if (!mtd->eraseregions) { - printk(KERN_ERR "Failed to allocate memory for MTD erase region info\n"); kfree(cfi->cmdset_priv); kfree(mtd); return NULL; @@ -964,7 +961,7 @@ static int cfi_staa_erase_varsize(struct mtd_info *mtd, chipnum++; if (chipnum >= cfi->numchips) - break; + break; } } @@ -1173,7 +1170,7 @@ static int cfi_staa_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) chipnum++; if (chipnum >= cfi->numchips) - break; + break; } } return 0; diff --git a/drivers/mtd/chips/cfi_probe.c b/drivers/mtd/chips/cfi_probe.c index d2553527940..e8d0164498b 100644 --- a/drivers/mtd/chips/cfi_probe.c +++ b/drivers/mtd/chips/cfi_probe.c @@ -168,10 +168,8 @@ static int __xipram cfi_chip_setup(struct map_info *map, return 0; cfi->cfiq = kmalloc(sizeof(struct cfi_ident) + num_erase_regions * 4, GFP_KERNEL); - if (!cfi->cfiq) { - printk(KERN_WARNING "%s: kmalloc failed for CFI ident structure\n", map->name); + if (!cfi->cfiq) return 0; - } memset(cfi->cfiq,0,sizeof(struct cfi_ident)); diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c index f992418f40a..09c79bd0b4f 100644 --- a/drivers/mtd/chips/cfi_util.c +++ b/drivers/mtd/chips/cfi_util.c @@ -116,10 +116,8 @@ __xipram cfi_read_pri(struct map_info *map, __u16 adr, __u16 size, const char* n printk(KERN_INFO "%s Extended Query Table at 0x%4.4X\n", name, adr); extp = kmalloc(size, GFP_KERNEL); - if (!extp) { - printk(KERN_ERR "Failed to allocate memory\n"); + if (!extp) goto out; - } #ifdef CONFIG_MTD_XIP local_irq_disable(); @@ -241,7 +239,7 @@ int cfi_varsize_frob(struct mtd_info *mtd, varsize_frob_t frob, chipnum++; if (chipnum >= cfi->numchips) - break; + break; } } diff --git a/drivers/mtd/chips/gen_probe.c b/drivers/mtd/chips/gen_probe.c index ffb36ba8a6e..b57ceea2151 100644 --- a/drivers/mtd/chips/gen_probe.c +++ b/drivers/mtd/chips/gen_probe.c @@ -114,7 +114,6 @@ static struct cfi_private *genprobe_ident_chips(struct map_info *map, struct chi mapsize = sizeof(long) * DIV_ROUND_UP(max_chips, BITS_PER_LONG); chip_map = kzalloc(mapsize, GFP_KERNEL); if (!chip_map) { - printk(KERN_WARNING "%s: kmalloc failed for CFI chip map\n", map->name); kfree(cfi.cfiq); return NULL; } @@ -139,7 +138,6 @@ static struct cfi_private *genprobe_ident_chips(struct map_info *map, struct chi retcfi = kmalloc(sizeof(struct cfi_private) + cfi.numchips * sizeof(struct flchip), GFP_KERNEL); if (!retcfi) { - printk(KERN_WARNING "%s: kmalloc failed for CFI private structure\n", map->name); kfree(cfi.cfiq); kfree(chip_map); return NULL; diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c index 721caebbc5c..3e829b37af8 100644 --- a/drivers/mtd/cmdlinepart.c +++ b/drivers/mtd/cmdlinepart.c @@ -395,7 +395,8 @@ static int __init cmdline_parser_init(void) { if (mtdparts) mtdpart_setup(mtdparts); - return register_mtd_parser(&cmdline_parser); + register_mtd_parser(&cmdline_parser); + return 0; } static void __exit cmdline_parser_exit(void) diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index 74ab4b7e523..c49d0b127fe 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -80,7 +80,7 @@ config MTD_DATAFLASH_OTP config MTD_M25P80 tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)" - depends on SPI_MASTER + depends on SPI_MASTER && MTD_SPI_NOR help This enables access to most modern SPI flash chips, used for program and data storage. Series supported include Atmel AT26DF, @@ -95,13 +95,6 @@ config MTD_M25P80 if you want to specify device partitioning or to use a device which doesn't support the JEDEC ID instruction. -config M25PXX_USE_FAST_READ - bool "Use FAST_READ OPCode allowing SPI CLK >= 50MHz" - depends on MTD_M25P80 - default y - help - This option enables FAST_READ access supported by ST M25Pxx. - config MTD_SPEAR_SMI tristate "SPEAR MTD NOR Support through SMI controller" depends on PLAT_SPEAR @@ -217,6 +210,14 @@ config MTD_DOCG3 M-Systems and now Sandisk. The support is very experimental, and doesn't give access to any write operations. +config MTD_ST_SPI_FSM + tristate "ST Microelectronics SPI FSM Serial Flash Controller" + depends on ARCH_STI + help + This provides an MTD device driver for the ST Microelectronics + SPI Fast Sequence Mode (FSM) Serial Flash Controller and support + for a subset of connected Serial Flash devices. + if MTD_DOCG3 config BCH_CONST_M default 14 diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile index d83bd73096f..c68868f6058 100644 --- a/drivers/mtd/devices/Makefile +++ b/drivers/mtd/devices/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_MTD_NAND_OMAP_BCH) += elm.o obj-$(CONFIG_MTD_SPEAR_SMI) += spear_smi.o obj-$(CONFIG_MTD_SST25L) += sst25l.o obj-$(CONFIG_MTD_BCM47XXSFLASH) += bcm47xxsflash.o +obj-$(CONFIG_MTD_ST_SPI_FSM) += st_spi_fsm.o CFLAGS_docg3.o += -I$(src) diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c index 5cb4c04726b..66f0405f7e5 100644 --- a/drivers/mtd/devices/block2mtd.c +++ b/drivers/mtd/devices/block2mtd.c @@ -20,6 +20,7 @@ #include <linux/mutex.h> #include <linux/mount.h> #include <linux/slab.h> +#include <linux/major.h> /* Info for the block device */ struct block2mtd_dev { @@ -208,7 +209,6 @@ static void block2mtd_free_device(struct block2mtd_dev *dev) } -/* FIXME: ensure that mtd->size % erase_size == 0 */ static struct block2mtd_dev *add_device(char *devname, int erase_size) { const fmode_t mode = FMODE_READ | FMODE_WRITE | FMODE_EXCL; @@ -239,13 +239,18 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size) if (IS_ERR(bdev)) { pr_err("error: cannot open device %s\n", devname); - goto devinit_err; + goto err_free_block2mtd; } dev->blkdev = bdev; if (MAJOR(bdev->bd_dev) == MTD_BLOCK_MAJOR) { pr_err("attempting to use an MTD device as a block device\n"); - goto devinit_err; + goto err_free_block2mtd; + } + + if ((long)dev->blkdev->bd_inode->i_size % erase_size) { + pr_err("erasesize must be a divisor of device size\n"); + goto err_free_block2mtd; } mutex_init(&dev->write_mutex); @@ -254,7 +259,7 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size) /* make the name contain the block device in */ name = kasprintf(GFP_KERNEL, "block2mtd: %s", devname); if (!name) - goto devinit_err; + goto err_destroy_mutex; dev->mtd.name = name; @@ -273,7 +278,7 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size) if (mtd_device_register(&dev->mtd, NULL, 0)) { /* Device didn't get added, so free the entry */ - goto devinit_err; + goto err_destroy_mutex; } list_add(&dev->list, &blkmtd_device_list); pr_info("mtd%d: [%s] erase_size = %dKiB [%d]\n", @@ -282,7 +287,9 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size) dev->mtd.erasesize >> 10, dev->mtd.erasesize); return dev; -devinit_err: +err_destroy_mutex: + mutex_destroy(&dev->write_mutex); +err_free_block2mtd: block2mtd_free_device(dev); return NULL; } @@ -447,6 +454,7 @@ static void block2mtd_exit(void) struct block2mtd_dev *dev = list_entry(pos, typeof(*dev), list); block2mtd_sync(&dev->mtd); mtd_device_unregister(&dev->mtd); + mutex_destroy(&dev->write_mutex); pr_info("mtd%d: [%s] removed\n", dev->mtd.index, dev->mtd.name + strlen("block2mtd: ")); diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c index 3e1b0a0ef4d..91a169c44b3 100644 --- a/drivers/mtd/devices/docg3.c +++ b/drivers/mtd/devices/docg3.c @@ -1608,8 +1608,8 @@ static ssize_t dps1_insert_key(struct device *dev, #define FLOOR_SYSFS(id) { \ __ATTR(f##id##_dps0_is_keylocked, S_IRUGO, dps0_is_key_locked, NULL), \ __ATTR(f##id##_dps1_is_keylocked, S_IRUGO, dps1_is_key_locked, NULL), \ - __ATTR(f##id##_dps0_protection_key, S_IWUGO, NULL, dps0_insert_key), \ - __ATTR(f##id##_dps1_protection_key, S_IWUGO, NULL, dps1_insert_key), \ + __ATTR(f##id##_dps0_protection_key, S_IWUSR|S_IWGRP, NULL, dps0_insert_key), \ + __ATTR(f##id##_dps1_protection_key, S_IWUSR|S_IWGRP, NULL, dps1_insert_key), \ } static struct device_attribute doc_sys_attrs[DOC_MAX_NBFLOORS][4] = { @@ -2047,21 +2047,21 @@ static int __init docg3_probe(struct platform_device *pdev) ress = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!ress) { dev_err(dev, "No I/O memory resource defined\n"); - goto noress; + return ret; } - base = ioremap(ress->start, DOC_IOSPACE_SIZE); + base = devm_ioremap(dev, ress->start, DOC_IOSPACE_SIZE); ret = -ENOMEM; - cascade = kzalloc(sizeof(*cascade) * DOC_MAX_NBFLOORS, - GFP_KERNEL); + cascade = devm_kzalloc(dev, sizeof(*cascade) * DOC_MAX_NBFLOORS, + GFP_KERNEL); if (!cascade) - goto nomem1; + return ret; cascade->base = base; mutex_init(&cascade->lock); cascade->bch = init_bch(DOC_ECC_BCH_M, DOC_ECC_BCH_T, DOC_ECC_BCH_PRIMPOLY); if (!cascade->bch) - goto nomem2; + return ret; for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++) { mtd = doc_probe_device(cascade, floor, dev); @@ -2097,15 +2097,10 @@ notfound: ret = -ENODEV; dev_info(dev, "No supported DiskOnChip found\n"); err_probe: - kfree(cascade->bch); + free_bch(cascade->bch); for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++) if (cascade->floors[floor]) doc_release_device(cascade->floors[floor]); -nomem2: - kfree(cascade); -nomem1: - iounmap(base); -noress: return ret; } @@ -2119,7 +2114,6 @@ static int __exit docg3_release(struct platform_device *pdev) { struct docg3_cascade *cascade = platform_get_drvdata(pdev); struct docg3 *docg3 = cascade->floors[0]->priv; - void __iomem *base = cascade->base; int floor; doc_unregister_sysfs(pdev, cascade); @@ -2129,8 +2123,6 @@ static int __exit docg3_release(struct platform_device *pdev) doc_release_device(cascade->floors[floor]); free_bch(docg3->cascade->bch); - kfree(cascade); - iounmap(base); return 0; } diff --git a/drivers/mtd/devices/elm.c b/drivers/mtd/devices/elm.c index d1dd6a33a05..b4f61c7fc16 100644 --- a/drivers/mtd/devices/elm.c +++ b/drivers/mtd/devices/elm.c @@ -15,6 +15,8 @@ * */ +#define DRIVER_NAME "omap-elm" + #include <linux/platform_device.h> #include <linux/module.h> #include <linux/interrupt.h> @@ -84,6 +86,8 @@ struct elm_info { struct list_head list; enum bch_ecc bch_type; struct elm_registers elm_regs; + int ecc_steps; + int ecc_syndrome_size; }; static LIST_HEAD(elm_devices); @@ -103,7 +107,8 @@ static u32 elm_read_reg(struct elm_info *info, int offset) * @dev: ELM device * @bch_type: Type of BCH ecc */ -int elm_config(struct device *dev, enum bch_ecc bch_type) +int elm_config(struct device *dev, enum bch_ecc bch_type, + int ecc_steps, int ecc_step_size, int ecc_syndrome_size) { u32 reg_val; struct elm_info *info = dev_get_drvdata(dev); @@ -112,10 +117,22 @@ int elm_config(struct device *dev, enum bch_ecc bch_type) dev_err(dev, "Unable to configure elm - device not probed?\n"); return -ENODEV; } + /* ELM cannot detect ECC errors for chunks > 1KB */ + if (ecc_step_size > ((ELM_ECC_SIZE + 1) / 2)) { + dev_err(dev, "unsupported config ecc-size=%d\n", ecc_step_size); + return -EINVAL; + } + /* ELM support 8 error syndrome process */ + if (ecc_steps > ERROR_VECTOR_MAX) { + dev_err(dev, "unsupported config ecc-step=%d\n", ecc_steps); + return -EINVAL; + } reg_val = (bch_type & ECC_BCH_LEVEL_MASK) | (ELM_ECC_SIZE << 16); elm_write_reg(info, ELM_LOCATION_CONFIG, reg_val); - info->bch_type = bch_type; + info->bch_type = bch_type; + info->ecc_steps = ecc_steps; + info->ecc_syndrome_size = ecc_syndrome_size; return 0; } @@ -157,17 +174,15 @@ static void elm_load_syndrome(struct elm_info *info, int i, offset; u32 val; - for (i = 0; i < ERROR_VECTOR_MAX; i++) { + for (i = 0; i < info->ecc_steps; i++) { /* Check error reported */ if (err_vec[i].error_reported) { elm_configure_page_mode(info, i, true); offset = ELM_SYNDROME_FRAGMENT_0 + SYNDROME_FRAGMENT_REG_SIZE * i; - - /* BCH8 */ - if (info->bch_type) { - + switch (info->bch_type) { + case BCH8_ECC: /* syndrome fragment 0 = ecc[9-12B] */ val = cpu_to_be32(*(u32 *) &ecc[9]); elm_write_reg(info, offset, val); @@ -186,7 +201,8 @@ static void elm_load_syndrome(struct elm_info *info, offset += 4; val = ecc[0]; elm_write_reg(info, offset, val); - } else { + break; + case BCH4_ECC: /* syndrome fragment 0 = ecc[20-52b] bits */ val = (cpu_to_be32(*(u32 *) &ecc[3]) >> 4) | ((ecc[2] & 0xf) << 28); @@ -196,11 +212,36 @@ static void elm_load_syndrome(struct elm_info *info, offset += 4; val = cpu_to_be32(*(u32 *) &ecc[0]) >> 12; elm_write_reg(info, offset, val); + break; + case BCH16_ECC: + val = cpu_to_be32(*(u32 *) &ecc[22]); + elm_write_reg(info, offset, val); + offset += 4; + val = cpu_to_be32(*(u32 *) &ecc[18]); + elm_write_reg(info, offset, val); + offset += 4; + val = cpu_to_be32(*(u32 *) &ecc[14]); + elm_write_reg(info, offset, val); + offset += 4; + val = cpu_to_be32(*(u32 *) &ecc[10]); + elm_write_reg(info, offset, val); + offset += 4; + val = cpu_to_be32(*(u32 *) &ecc[6]); + elm_write_reg(info, offset, val); + offset += 4; + val = cpu_to_be32(*(u32 *) &ecc[2]); + elm_write_reg(info, offset, val); + offset += 4; + val = cpu_to_be32(*(u32 *) &ecc[0]) >> 16; + elm_write_reg(info, offset, val); + break; + default: + pr_err("invalid config bch_type\n"); } } /* Update ecc pointer with ecc byte size */ - ecc += info->bch_type ? BCH8_SIZE : BCH4_SIZE; + ecc += info->ecc_syndrome_size; } } @@ -223,7 +264,7 @@ static void elm_start_processing(struct elm_info *info, * Set syndrome vector valid, so that ELM module * will process it for vectors error is reported */ - for (i = 0; i < ERROR_VECTOR_MAX; i++) { + for (i = 0; i < info->ecc_steps; i++) { if (err_vec[i].error_reported) { offset = ELM_SYNDROME_FRAGMENT_6 + SYNDROME_FRAGMENT_REG_SIZE * i; @@ -252,7 +293,7 @@ static void elm_error_correction(struct elm_info *info, int offset; u32 reg_val; - for (i = 0; i < ERROR_VECTOR_MAX; i++) { + for (i = 0; i < info->ecc_steps; i++) { /* Check error reported */ if (err_vec[i].error_reported) { @@ -354,10 +395,8 @@ static int elm_probe(struct platform_device *pdev) struct elm_info *info; info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); - if (!info) { - dev_err(&pdev->dev, "failed to allocate memory\n"); + if (!info) return -ENOMEM; - } info->dev = &pdev->dev; @@ -380,7 +419,7 @@ static int elm_probe(struct platform_device *pdev) } pm_runtime_enable(&pdev->dev); - if (pm_runtime_get_sync(&pdev->dev)) { + if (pm_runtime_get_sync(&pdev->dev) < 0) { ret = -EINVAL; pm_runtime_disable(&pdev->dev); dev_err(&pdev->dev, "can't enable clock\n"); @@ -401,6 +440,7 @@ static int elm_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM_SLEEP /** * elm_context_save * saves ELM configurations to preserve them across Hardware powered-down @@ -418,6 +458,13 @@ static int elm_context_save(struct elm_info *info) for (i = 0; i < ERROR_VECTOR_MAX; i++) { offset = i * SYNDROME_FRAGMENT_REG_SIZE; switch (bch_type) { + case BCH16_ECC: + regs->elm_syndrome_fragment_6[i] = elm_read_reg(info, + ELM_SYNDROME_FRAGMENT_6 + offset); + regs->elm_syndrome_fragment_5[i] = elm_read_reg(info, + ELM_SYNDROME_FRAGMENT_5 + offset); + regs->elm_syndrome_fragment_4[i] = elm_read_reg(info, + ELM_SYNDROME_FRAGMENT_4 + offset); case BCH8_ECC: regs->elm_syndrome_fragment_3[i] = elm_read_reg(info, ELM_SYNDROME_FRAGMENT_3 + offset); @@ -428,6 +475,7 @@ static int elm_context_save(struct elm_info *info) ELM_SYNDROME_FRAGMENT_1 + offset); regs->elm_syndrome_fragment_0[i] = elm_read_reg(info, ELM_SYNDROME_FRAGMENT_0 + offset); + break; default: return -EINVAL; } @@ -456,6 +504,13 @@ static int elm_context_restore(struct elm_info *info) for (i = 0; i < ERROR_VECTOR_MAX; i++) { offset = i * SYNDROME_FRAGMENT_REG_SIZE; switch (bch_type) { + case BCH16_ECC: + elm_write_reg(info, ELM_SYNDROME_FRAGMENT_6 + offset, + regs->elm_syndrome_fragment_6[i]); + elm_write_reg(info, ELM_SYNDROME_FRAGMENT_5 + offset, + regs->elm_syndrome_fragment_5[i]); + elm_write_reg(info, ELM_SYNDROME_FRAGMENT_4 + offset, + regs->elm_syndrome_fragment_4[i]); case BCH8_ECC: elm_write_reg(info, ELM_SYNDROME_FRAGMENT_3 + offset, regs->elm_syndrome_fragment_3[i]); @@ -466,6 +521,7 @@ static int elm_context_restore(struct elm_info *info) regs->elm_syndrome_fragment_1[i]); elm_write_reg(info, ELM_SYNDROME_FRAGMENT_0 + offset, regs->elm_syndrome_fragment_0[i]); + break; default: return -EINVAL; } @@ -492,6 +548,7 @@ static int elm_resume(struct device *dev) elm_context_restore(info); return 0; } +#endif static SIMPLE_DEV_PM_OPS(elm_pm_ops, elm_suspend, elm_resume); @@ -505,7 +562,7 @@ MODULE_DEVICE_TABLE(of, elm_of_match); static struct platform_driver elm_driver = { .driver = { - .name = "elm", + .name = DRIVER_NAME, .owner = THIS_MODULE, .of_match_table = of_match_ptr(elm_of_match), .pm = &elm_pm_ops, diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 6bc9618af09..ed7e0a1bed3 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -15,918 +15,175 @@ * */ -#include <linux/init.h> #include <linux/err.h> #include <linux/errno.h> #include <linux/module.h> #include <linux/device.h> -#include <linux/interrupt.h> -#include <linux/mutex.h> -#include <linux/math64.h> -#include <linux/slab.h> -#include <linux/sched.h> -#include <linux/mod_devicetable.h> -#include <linux/mtd/cfi.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> -#include <linux/of_platform.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> +#include <linux/mtd/spi-nor.h> -/* Flash opcodes. */ -#define OPCODE_WREN 0x06 /* Write enable */ -#define OPCODE_RDSR 0x05 /* Read status register */ -#define OPCODE_WRSR 0x01 /* Write status register 1 byte */ -#define OPCODE_NORM_READ 0x03 /* Read data bytes (low frequency) */ -#define OPCODE_FAST_READ 0x0b /* Read data bytes (high frequency) */ -#define OPCODE_PP 0x02 /* Page program (up to 256 bytes) */ -#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */ -#define OPCODE_BE_4K_PMC 0xd7 /* Erase 4KiB block on PMC chips */ -#define OPCODE_BE_32K 0x52 /* Erase 32KiB block */ -#define OPCODE_CHIP_ERASE 0xc7 /* Erase whole flash chip */ -#define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */ -#define OPCODE_RDID 0x9f /* Read JEDEC ID */ - -/* 4-byte address opcodes - used on Spansion and some Macronix flashes. */ -#define OPCODE_NORM_READ_4B 0x13 /* Read data bytes (low frequency) */ -#define OPCODE_FAST_READ_4B 0x0c /* Read data bytes (high frequency) */ -#define OPCODE_PP_4B 0x12 /* Page program (up to 256 bytes) */ -#define OPCODE_SE_4B 0xdc /* Sector erase (usually 64KiB) */ - -/* Used for SST flashes only. */ -#define OPCODE_BP 0x02 /* Byte program */ -#define OPCODE_WRDI 0x04 /* Write disable */ -#define OPCODE_AAI_WP 0xad /* Auto address increment word program */ - -/* Used for Macronix and Winbond flashes. */ -#define OPCODE_EN4B 0xb7 /* Enter 4-byte mode */ -#define OPCODE_EX4B 0xe9 /* Exit 4-byte mode */ - -/* Used for Spansion flashes only. */ -#define OPCODE_BRWR 0x17 /* Bank register write */ - -/* Status Register bits. */ -#define SR_WIP 1 /* Write in progress */ -#define SR_WEL 2 /* Write enable latch */ -/* meaning of other SR_* bits may differ between vendors */ -#define SR_BP0 4 /* Block protect 0 */ -#define SR_BP1 8 /* Block protect 1 */ -#define SR_BP2 0x10 /* Block protect 2 */ -#define SR_SRWD 0x80 /* SR write protect */ - -/* Define max times to check status register before we give up. */ -#define MAX_READY_WAIT_JIFFIES (40 * HZ) /* M25P16 specs 40s max chip erase */ -#define MAX_CMD_SIZE 5 - -#define JEDEC_MFR(_jedec_id) ((_jedec_id) >> 16) - -/****************************************************************************/ - +#define MAX_CMD_SIZE 6 struct m25p { struct spi_device *spi; - struct mutex lock; + struct spi_nor spi_nor; struct mtd_info mtd; - u16 page_size; - u16 addr_width; - u8 erase_opcode; - u8 read_opcode; - u8 program_opcode; - u8 *command; - bool fast_read; + u8 command[MAX_CMD_SIZE]; }; -static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd) +static int m25p80_read_reg(struct spi_nor *nor, u8 code, u8 *val, int len) { - return container_of(mtd, struct m25p, mtd); -} - -/****************************************************************************/ - -/* - * Internal helper functions - */ - -/* - * Read the status register, returning its value in the location - * Return the status register value. - * Returns negative if error occurred. - */ -static int read_sr(struct m25p *flash) -{ - ssize_t retval; - u8 code = OPCODE_RDSR; - u8 val; - - retval = spi_write_then_read(flash->spi, &code, 1, &val, 1); + struct m25p *flash = nor->priv; + struct spi_device *spi = flash->spi; + int ret; - if (retval < 0) { - dev_err(&flash->spi->dev, "error %d reading SR\n", - (int) retval); - return retval; - } - - return val; -} - -/* - * Write status register 1 byte - * Returns negative if error occurred. - */ -static int write_sr(struct m25p *flash, u8 val) -{ - flash->command[0] = OPCODE_WRSR; - flash->command[1] = val; - - return spi_write(flash->spi, flash->command, 2); -} - -/* - * Set write enable latch with Write Enable command. - * Returns negative if error occurred. - */ -static inline int write_enable(struct m25p *flash) -{ - u8 code = OPCODE_WREN; - - return spi_write_then_read(flash->spi, &code, 1, NULL, 0); -} - -/* - * Send write disble instruction to the chip. - */ -static inline int write_disable(struct m25p *flash) -{ - u8 code = OPCODE_WRDI; + ret = spi_write_then_read(spi, &code, 1, val, len); + if (ret < 0) + dev_err(&spi->dev, "error %d reading %x\n", ret, code); - return spi_write_then_read(flash->spi, &code, 1, NULL, 0); + return ret; } -/* - * Enable/disable 4-byte addressing mode. - */ -static inline int set_4byte(struct m25p *flash, u32 jedec_id, int enable) +static void m25p_addr2cmd(struct spi_nor *nor, unsigned int addr, u8 *cmd) { - int status; - bool need_wren = false; - - switch (JEDEC_MFR(jedec_id)) { - case CFI_MFR_ST: /* Micron, actually */ - /* Some Micron need WREN command; all will accept it */ - need_wren = true; - case CFI_MFR_MACRONIX: - case 0xEF /* winbond */: - if (need_wren) - write_enable(flash); - - flash->command[0] = enable ? OPCODE_EN4B : OPCODE_EX4B; - status = spi_write(flash->spi, flash->command, 1); - - if (need_wren) - write_disable(flash); - - return status; - default: - /* Spansion style */ - flash->command[0] = OPCODE_BRWR; - flash->command[1] = enable << 7; - return spi_write(flash->spi, flash->command, 2); - } + /* opcode is in cmd[0] */ + cmd[1] = addr >> (nor->addr_width * 8 - 8); + cmd[2] = addr >> (nor->addr_width * 8 - 16); + cmd[3] = addr >> (nor->addr_width * 8 - 24); + cmd[4] = addr >> (nor->addr_width * 8 - 32); } -/* - * Service routine to read status register until ready, or timeout occurs. - * Returns non-zero if error. - */ -static int wait_till_ready(struct m25p *flash) +static int m25p_cmdsz(struct spi_nor *nor) { - unsigned long deadline; - int sr; - - deadline = jiffies + MAX_READY_WAIT_JIFFIES; - - do { - if ((sr = read_sr(flash)) < 0) - break; - else if (!(sr & SR_WIP)) - return 0; - - cond_resched(); - - } while (!time_after_eq(jiffies, deadline)); - - return 1; + return 1 + nor->addr_width; } -/* - * Erase the whole flash memory - * - * Returns 0 if successful, non-zero otherwise. - */ -static int erase_chip(struct m25p *flash) +static int m25p80_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len, + int wr_en) { - pr_debug("%s: %s %lldKiB\n", dev_name(&flash->spi->dev), __func__, - (long long)(flash->mtd.size >> 10)); + struct m25p *flash = nor->priv; + struct spi_device *spi = flash->spi; - /* Wait until finished previous write command. */ - if (wait_till_ready(flash)) - return 1; - - /* Send write enable, then erase commands. */ - write_enable(flash); - - /* Set up command buffer. */ - flash->command[0] = OPCODE_CHIP_ERASE; - - spi_write(flash->spi, flash->command, 1); + flash->command[0] = opcode; + if (buf) + memcpy(&flash->command[1], buf, len); - return 0; + return spi_write(spi, flash->command, len + 1); } -static void m25p_addr2cmd(struct m25p *flash, unsigned int addr, u8 *cmd) +static void m25p80_write(struct spi_nor *nor, loff_t to, size_t len, + size_t *retlen, const u_char *buf) { - /* opcode is in cmd[0] */ - cmd[1] = addr >> (flash->addr_width * 8 - 8); - cmd[2] = addr >> (flash->addr_width * 8 - 16); - cmd[3] = addr >> (flash->addr_width * 8 - 24); - cmd[4] = addr >> (flash->addr_width * 8 - 32); -} + struct m25p *flash = nor->priv; + struct spi_device *spi = flash->spi; + struct spi_transfer t[2] = {}; + struct spi_message m; + int cmd_sz = m25p_cmdsz(nor); -static int m25p_cmdsz(struct m25p *flash) -{ - return 1 + flash->addr_width; -} + spi_message_init(&m); -/* - * Erase one sector of flash memory at offset ``offset'' which is any - * address within the sector which should be erased. - * - * Returns 0 if successful, non-zero otherwise. - */ -static int erase_sector(struct m25p *flash, u32 offset) -{ - pr_debug("%s: %s %dKiB at 0x%08x\n", dev_name(&flash->spi->dev), - __func__, flash->mtd.erasesize / 1024, offset); + if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second) + cmd_sz = 1; - /* Wait until finished previous write command. */ - if (wait_till_ready(flash)) - return 1; + flash->command[0] = nor->program_opcode; + m25p_addr2cmd(nor, to, flash->command); - /* Send write enable, then erase commands. */ - write_enable(flash); + t[0].tx_buf = flash->command; + t[0].len = cmd_sz; + spi_message_add_tail(&t[0], &m); - /* Set up command buffer. */ - flash->command[0] = flash->erase_opcode; - m25p_addr2cmd(flash, offset, flash->command); + t[1].tx_buf = buf; + t[1].len = len; + spi_message_add_tail(&t[1], &m); - spi_write(flash->spi, flash->command, m25p_cmdsz(flash)); + spi_sync(spi, &m); - return 0; + *retlen += m.actual_length - cmd_sz; } -/****************************************************************************/ - -/* - * MTD implementation - */ - -/* - * Erase an address range on the flash chip. The address range may extend - * one or more erase sectors. Return an error is there is a problem erasing. - */ -static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr) +static inline unsigned int m25p80_rx_nbits(struct spi_nor *nor) { - struct m25p *flash = mtd_to_m25p(mtd); - u32 addr,len; - uint32_t rem; - - pr_debug("%s: %s at 0x%llx, len %lld\n", dev_name(&flash->spi->dev), - __func__, (long long)instr->addr, - (long long)instr->len); - - div_u64_rem(instr->len, mtd->erasesize, &rem); - if (rem) - return -EINVAL; - - addr = instr->addr; - len = instr->len; - - mutex_lock(&flash->lock); - - /* whole-chip erase? */ - if (len == flash->mtd.size) { - if (erase_chip(flash)) { - instr->state = MTD_ERASE_FAILED; - mutex_unlock(&flash->lock); - return -EIO; - } - - /* REVISIT in some cases we could speed up erasing large regions - * by using OPCODE_SE instead of OPCODE_BE_4K. We may have set up - * to use "small sector erase", but that's not always optimal. - */ - - /* "sector"-at-a-time erase */ - } else { - while (len) { - if (erase_sector(flash, addr)) { - instr->state = MTD_ERASE_FAILED; - mutex_unlock(&flash->lock); - return -EIO; - } - - addr += mtd->erasesize; - len -= mtd->erasesize; - } + switch (nor->flash_read) { + case SPI_NOR_DUAL: + return 2; + case SPI_NOR_QUAD: + return 4; + default: + return 0; } - - mutex_unlock(&flash->lock); - - instr->state = MTD_ERASE_DONE; - mtd_erase_callback(instr); - - return 0; } /* - * Read an address range from the flash chip. The address range + * Read an address range from the nor chip. The address range * may be any size provided it is within the physical boundaries. */ -static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf) +static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len, + size_t *retlen, u_char *buf) { - struct m25p *flash = mtd_to_m25p(mtd); + struct m25p *flash = nor->priv; + struct spi_device *spi = flash->spi; struct spi_transfer t[2]; struct spi_message m; - uint8_t opcode; + int dummy = nor->read_dummy; + int ret; - pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev), - __func__, (u32)from, len); + /* Wait till previous write/erase is done. */ + ret = nor->wait_till_ready(nor); + if (ret) + return ret; spi_message_init(&m); memset(t, 0, (sizeof t)); - /* NOTE: - * OPCODE_FAST_READ (if available) is faster. - * Should add 1 byte DUMMY_BYTE. - */ + flash->command[0] = nor->read_opcode; + m25p_addr2cmd(nor, from, flash->command); + t[0].tx_buf = flash->command; - t[0].len = m25p_cmdsz(flash) + (flash->fast_read ? 1 : 0); + t[0].len = m25p_cmdsz(nor) + dummy; spi_message_add_tail(&t[0], &m); t[1].rx_buf = buf; + t[1].rx_nbits = m25p80_rx_nbits(nor); t[1].len = len; spi_message_add_tail(&t[1], &m); - mutex_lock(&flash->lock); - - /* Wait till previous write/erase is done. */ - if (wait_till_ready(flash)) { - /* REVISIT status return?? */ - mutex_unlock(&flash->lock); - return 1; - } - - /* FIXME switch to OPCODE_FAST_READ. It's required for higher - * clocks; and at this writing, every chip this driver handles - * supports that opcode. - */ - - /* Set up the write data buffer. */ - opcode = flash->read_opcode; - flash->command[0] = opcode; - m25p_addr2cmd(flash, from, flash->command); - - spi_sync(flash->spi, &m); - - *retlen = m.actual_length - m25p_cmdsz(flash) - - (flash->fast_read ? 1 : 0); - - mutex_unlock(&flash->lock); - - return 0; -} - -/* - * Write an address range to the flash chip. Data must be written in - * FLASH_PAGESIZE chunks. The address range may be any size provided - * it is within the physical boundaries. - */ -static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf) -{ - struct m25p *flash = mtd_to_m25p(mtd); - u32 page_offset, page_size; - struct spi_transfer t[2]; - struct spi_message m; - - pr_debug("%s: %s to 0x%08x, len %zd\n", dev_name(&flash->spi->dev), - __func__, (u32)to, len); - - spi_message_init(&m); - memset(t, 0, (sizeof t)); - - t[0].tx_buf = flash->command; - t[0].len = m25p_cmdsz(flash); - spi_message_add_tail(&t[0], &m); - - t[1].tx_buf = buf; - spi_message_add_tail(&t[1], &m); - - mutex_lock(&flash->lock); - - /* Wait until finished previous write command. */ - if (wait_till_ready(flash)) { - mutex_unlock(&flash->lock); - return 1; - } - - write_enable(flash); - - /* Set up the opcode in the write buffer. */ - flash->command[0] = flash->program_opcode; - m25p_addr2cmd(flash, to, flash->command); - - page_offset = to & (flash->page_size - 1); - - /* do all the bytes fit onto one page? */ - if (page_offset + len <= flash->page_size) { - t[1].len = len; - - spi_sync(flash->spi, &m); - - *retlen = m.actual_length - m25p_cmdsz(flash); - } else { - u32 i; - - /* the size of data remaining on the first page */ - page_size = flash->page_size - page_offset; - - t[1].len = page_size; - spi_sync(flash->spi, &m); - - *retlen = m.actual_length - m25p_cmdsz(flash); - - /* write everything in flash->page_size chunks */ - for (i = page_size; i < len; i += page_size) { - page_size = len - i; - if (page_size > flash->page_size) - page_size = flash->page_size; - - /* write the next page to flash */ - m25p_addr2cmd(flash, to + i, flash->command); - - t[1].tx_buf = buf + i; - t[1].len = page_size; - - wait_till_ready(flash); - - write_enable(flash); - - spi_sync(flash->spi, &m); - - *retlen += m.actual_length - m25p_cmdsz(flash); - } - } - - mutex_unlock(&flash->lock); + spi_sync(spi, &m); + *retlen = m.actual_length - m25p_cmdsz(nor) - dummy; return 0; } -static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf) +static int m25p80_erase(struct spi_nor *nor, loff_t offset) { - struct m25p *flash = mtd_to_m25p(mtd); - struct spi_transfer t[2]; - struct spi_message m; - size_t actual; - int cmd_sz, ret; - - pr_debug("%s: %s to 0x%08x, len %zd\n", dev_name(&flash->spi->dev), - __func__, (u32)to, len); + struct m25p *flash = nor->priv; + int ret; - spi_message_init(&m); - memset(t, 0, (sizeof t)); - - t[0].tx_buf = flash->command; - t[0].len = m25p_cmdsz(flash); - spi_message_add_tail(&t[0], &m); - - t[1].tx_buf = buf; - spi_message_add_tail(&t[1], &m); - - mutex_lock(&flash->lock); + dev_dbg(nor->dev, "%dKiB at 0x%08x\n", + flash->mtd.erasesize / 1024, (u32)offset); /* Wait until finished previous write command. */ - ret = wait_till_ready(flash); + ret = nor->wait_till_ready(nor); if (ret) - goto time_out; - - write_enable(flash); - - actual = to % 2; - /* Start write from odd address. */ - if (actual) { - flash->command[0] = OPCODE_BP; - m25p_addr2cmd(flash, to, flash->command); + return ret; - /* write one byte. */ - t[1].len = 1; - spi_sync(flash->spi, &m); - ret = wait_till_ready(flash); - if (ret) - goto time_out; - *retlen += m.actual_length - m25p_cmdsz(flash); - } - to += actual; - - flash->command[0] = OPCODE_AAI_WP; - m25p_addr2cmd(flash, to, flash->command); - - /* Write out most of the data here. */ - cmd_sz = m25p_cmdsz(flash); - for (; actual < len - 1; actual += 2) { - t[0].len = cmd_sz; - /* write two bytes. */ - t[1].len = 2; - t[1].tx_buf = buf + actual; - - spi_sync(flash->spi, &m); - ret = wait_till_ready(flash); - if (ret) - goto time_out; - *retlen += m.actual_length - cmd_sz; - cmd_sz = 1; - to += 2; - } - write_disable(flash); - ret = wait_till_ready(flash); + /* Send write enable, then erase commands. */ + ret = nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0, 0); if (ret) - goto time_out; - - /* Write out trailing byte if it exists. */ - if (actual != len) { - write_enable(flash); - flash->command[0] = OPCODE_BP; - m25p_addr2cmd(flash, to, flash->command); - t[0].len = m25p_cmdsz(flash); - t[1].len = 1; - t[1].tx_buf = buf + actual; - - spi_sync(flash->spi, &m); - ret = wait_till_ready(flash); - if (ret) - goto time_out; - *retlen += m.actual_length - m25p_cmdsz(flash); - write_disable(flash); - } - -time_out: - mutex_unlock(&flash->lock); - return ret; -} - -static int m25p80_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) -{ - struct m25p *flash = mtd_to_m25p(mtd); - uint32_t offset = ofs; - uint8_t status_old, status_new; - int res = 0; - - mutex_lock(&flash->lock); - /* Wait until finished previous command */ - if (wait_till_ready(flash)) { - res = 1; - goto err; - } - - status_old = read_sr(flash); - - if (offset < flash->mtd.size-(flash->mtd.size/2)) - status_new = status_old | SR_BP2 | SR_BP1 | SR_BP0; - else if (offset < flash->mtd.size-(flash->mtd.size/4)) - status_new = (status_old & ~SR_BP0) | SR_BP2 | SR_BP1; - else if (offset < flash->mtd.size-(flash->mtd.size/8)) - status_new = (status_old & ~SR_BP1) | SR_BP2 | SR_BP0; - else if (offset < flash->mtd.size-(flash->mtd.size/16)) - status_new = (status_old & ~(SR_BP0|SR_BP1)) | SR_BP2; - else if (offset < flash->mtd.size-(flash->mtd.size/32)) - status_new = (status_old & ~SR_BP2) | SR_BP1 | SR_BP0; - else if (offset < flash->mtd.size-(flash->mtd.size/64)) - status_new = (status_old & ~(SR_BP2|SR_BP0)) | SR_BP1; - else - status_new = (status_old & ~(SR_BP2|SR_BP1)) | SR_BP0; - - /* Only modify protection if it will not unlock other areas */ - if ((status_new&(SR_BP2|SR_BP1|SR_BP0)) > - (status_old&(SR_BP2|SR_BP1|SR_BP0))) { - write_enable(flash); - if (write_sr(flash, status_new) < 0) { - res = 1; - goto err; - } - } - -err: mutex_unlock(&flash->lock); - return res; -} - -static int m25p80_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) -{ - struct m25p *flash = mtd_to_m25p(mtd); - uint32_t offset = ofs; - uint8_t status_old, status_new; - int res = 0; - - mutex_lock(&flash->lock); - /* Wait until finished previous command */ - if (wait_till_ready(flash)) { - res = 1; - goto err; - } - - status_old = read_sr(flash); - - if (offset+len > flash->mtd.size-(flash->mtd.size/64)) - status_new = status_old & ~(SR_BP2|SR_BP1|SR_BP0); - else if (offset+len > flash->mtd.size-(flash->mtd.size/32)) - status_new = (status_old & ~(SR_BP2|SR_BP1)) | SR_BP0; - else if (offset+len > flash->mtd.size-(flash->mtd.size/16)) - status_new = (status_old & ~(SR_BP2|SR_BP0)) | SR_BP1; - else if (offset+len > flash->mtd.size-(flash->mtd.size/8)) - status_new = (status_old & ~SR_BP2) | SR_BP1 | SR_BP0; - else if (offset+len > flash->mtd.size-(flash->mtd.size/4)) - status_new = (status_old & ~(SR_BP0|SR_BP1)) | SR_BP2; - else if (offset+len > flash->mtd.size-(flash->mtd.size/2)) - status_new = (status_old & ~SR_BP1) | SR_BP2 | SR_BP0; - else - status_new = (status_old & ~SR_BP0) | SR_BP2 | SR_BP1; - - /* Only modify protection if it will not lock other areas */ - if ((status_new&(SR_BP2|SR_BP1|SR_BP0)) < - (status_old&(SR_BP2|SR_BP1|SR_BP0))) { - write_enable(flash); - if (write_sr(flash, status_new) < 0) { - res = 1; - goto err; - } - } - -err: mutex_unlock(&flash->lock); - return res; -} - -/****************************************************************************/ - -/* - * SPI device driver setup and teardown - */ - -struct flash_info { - /* JEDEC id zero means "no ID" (most older chips); otherwise it has - * a high byte of zero plus three data bytes: the manufacturer id, - * then a two byte device id. - */ - u32 jedec_id; - u16 ext_id; - - /* The size listed here is what works with OPCODE_SE, which isn't - * necessarily called a "sector" by the vendor. - */ - unsigned sector_size; - u16 n_sectors; - - u16 page_size; - u16 addr_width; - - u16 flags; -#define SECT_4K 0x01 /* OPCODE_BE_4K works uniformly */ -#define M25P_NO_ERASE 0x02 /* No erase command needed */ -#define SST_WRITE 0x04 /* use SST byte programming */ -#define M25P_NO_FR 0x08 /* Can't do fastread */ -#define SECT_4K_PMC 0x10 /* OPCODE_BE_4K_PMC works uniformly */ -}; - -#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \ - ((kernel_ulong_t)&(struct flash_info) { \ - .jedec_id = (_jedec_id), \ - .ext_id = (_ext_id), \ - .sector_size = (_sector_size), \ - .n_sectors = (_n_sectors), \ - .page_size = 256, \ - .flags = (_flags), \ - }) - -#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width, _flags) \ - ((kernel_ulong_t)&(struct flash_info) { \ - .sector_size = (_sector_size), \ - .n_sectors = (_n_sectors), \ - .page_size = (_page_size), \ - .addr_width = (_addr_width), \ - .flags = (_flags), \ - }) + return ret; -/* NOTE: double check command sets and memory organization when you add - * more flash chips. This current list focusses on newer chips, which - * have been converging on command sets which including JEDEC ID. - */ -static const struct spi_device_id m25p_ids[] = { - /* Atmel -- some are (confusingly) marketed as "DataFlash" */ - { "at25fs010", INFO(0x1f6601, 0, 32 * 1024, 4, SECT_4K) }, - { "at25fs040", INFO(0x1f6604, 0, 64 * 1024, 8, SECT_4K) }, - - { "at25df041a", INFO(0x1f4401, 0, 64 * 1024, 8, SECT_4K) }, - { "at25df321a", INFO(0x1f4701, 0, 64 * 1024, 64, SECT_4K) }, - { "at25df641", INFO(0x1f4800, 0, 64 * 1024, 128, SECT_4K) }, - - { "at26f004", INFO(0x1f0400, 0, 64 * 1024, 8, SECT_4K) }, - { "at26df081a", INFO(0x1f4501, 0, 64 * 1024, 16, SECT_4K) }, - { "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32, SECT_4K) }, - { "at26df321", INFO(0x1f4700, 0, 64 * 1024, 64, SECT_4K) }, - - { "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16, SECT_4K) }, - - /* EON -- en25xxx */ - { "en25f32", INFO(0x1c3116, 0, 64 * 1024, 64, SECT_4K) }, - { "en25p32", INFO(0x1c2016, 0, 64 * 1024, 64, 0) }, - { "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64, 0) }, - { "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) }, - { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) }, - { "en25qh256", INFO(0x1c7019, 0, 64 * 1024, 512, 0) }, - - /* Everspin */ - { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, M25P_NO_ERASE | M25P_NO_FR) }, - { "mr25h10", CAT25_INFO(128 * 1024, 1, 256, 3, M25P_NO_ERASE | M25P_NO_FR) }, - - /* GigaDevice */ - { "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64, SECT_4K) }, - { "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128, SECT_4K) }, - - /* Intel/Numonyx -- xxxs33b */ - { "160s33b", INFO(0x898911, 0, 64 * 1024, 32, 0) }, - { "320s33b", INFO(0x898912, 0, 64 * 1024, 64, 0) }, - { "640s33b", INFO(0x898913, 0, 64 * 1024, 128, 0) }, - - /* Macronix */ - { "mx25l2005a", INFO(0xc22012, 0, 64 * 1024, 4, SECT_4K) }, - { "mx25l4005a", INFO(0xc22013, 0, 64 * 1024, 8, SECT_4K) }, - { "mx25l8005", INFO(0xc22014, 0, 64 * 1024, 16, 0) }, - { "mx25l1606e", INFO(0xc22015, 0, 64 * 1024, 32, SECT_4K) }, - { "mx25l3205d", INFO(0xc22016, 0, 64 * 1024, 64, 0) }, - { "mx25l6405d", INFO(0xc22017, 0, 64 * 1024, 128, 0) }, - { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) }, - { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) }, - { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) }, - { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) }, - { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, 0) }, - - /* Micron */ - { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, 0) }, - { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, 0) }, - { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, 0) }, - { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K) }, - - /* PMC */ - { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) }, - { "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K_PMC) }, - { "pm25lq032", INFO(0x7f9d46, 0, 64 * 1024, 64, SECT_4K) }, - - /* Spansion -- single (large) sector size only, at least - * for the chips listed here (without boot sectors). - */ - { "s25sl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64, 0) }, - { "s25sl064p", INFO(0x010216, 0x4d00, 64 * 1024, 128, 0) }, - { "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, 0) }, - { "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, 0) }, - { "s25fl512s", INFO(0x010220, 0x4d00, 256 * 1024, 256, 0) }, - { "s70fl01gs", INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) }, - { "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) }, - { "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) }, - { "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64, 0) }, - { "s25fl129p1", INFO(0x012018, 0x4d01, 64 * 1024, 256, 0) }, - { "s25sl004a", INFO(0x010212, 0, 64 * 1024, 8, 0) }, - { "s25sl008a", INFO(0x010213, 0, 64 * 1024, 16, 0) }, - { "s25sl016a", INFO(0x010214, 0, 64 * 1024, 32, 0) }, - { "s25sl032a", INFO(0x010215, 0, 64 * 1024, 64, 0) }, - { "s25sl064a", INFO(0x010216, 0, 64 * 1024, 128, 0) }, - { "s25fl016k", INFO(0xef4015, 0, 64 * 1024, 32, SECT_4K) }, - { "s25fl064k", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) }, - - /* SST -- large erase sizes are "overlays", "sectors" are 4K */ - { "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) }, - { "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) }, - { "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32, SECT_4K | SST_WRITE) }, - { "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64, SECT_4K | SST_WRITE) }, - { "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128, SECT_4K) }, - { "sst25wf512", INFO(0xbf2501, 0, 64 * 1024, 1, SECT_4K | SST_WRITE) }, - { "sst25wf010", INFO(0xbf2502, 0, 64 * 1024, 2, SECT_4K | SST_WRITE) }, - { "sst25wf020", INFO(0xbf2503, 0, 64 * 1024, 4, SECT_4K | SST_WRITE) }, - { "sst25wf040", INFO(0xbf2504, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) }, - - /* ST Microelectronics -- newer production may have feature updates */ - { "m25p05", INFO(0x202010, 0, 32 * 1024, 2, 0) }, - { "m25p10", INFO(0x202011, 0, 32 * 1024, 4, 0) }, - { "m25p20", INFO(0x202012, 0, 64 * 1024, 4, 0) }, - { "m25p40", INFO(0x202013, 0, 64 * 1024, 8, 0) }, - { "m25p80", INFO(0x202014, 0, 64 * 1024, 16, 0) }, - { "m25p16", INFO(0x202015, 0, 64 * 1024, 32, 0) }, - { "m25p32", INFO(0x202016, 0, 64 * 1024, 64, 0) }, - { "m25p64", INFO(0x202017, 0, 64 * 1024, 128, 0) }, - { "m25p128", INFO(0x202018, 0, 256 * 1024, 64, 0) }, - { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, 0) }, - - { "m25p05-nonjedec", INFO(0, 0, 32 * 1024, 2, 0) }, - { "m25p10-nonjedec", INFO(0, 0, 32 * 1024, 4, 0) }, - { "m25p20-nonjedec", INFO(0, 0, 64 * 1024, 4, 0) }, - { "m25p40-nonjedec", INFO(0, 0, 64 * 1024, 8, 0) }, - { "m25p80-nonjedec", INFO(0, 0, 64 * 1024, 16, 0) }, - { "m25p16-nonjedec", INFO(0, 0, 64 * 1024, 32, 0) }, - { "m25p32-nonjedec", INFO(0, 0, 64 * 1024, 64, 0) }, - { "m25p64-nonjedec", INFO(0, 0, 64 * 1024, 128, 0) }, - { "m25p128-nonjedec", INFO(0, 0, 256 * 1024, 64, 0) }, - - { "m45pe10", INFO(0x204011, 0, 64 * 1024, 2, 0) }, - { "m45pe80", INFO(0x204014, 0, 64 * 1024, 16, 0) }, - { "m45pe16", INFO(0x204015, 0, 64 * 1024, 32, 0) }, - - { "m25pe20", INFO(0x208012, 0, 64 * 1024, 4, 0) }, - { "m25pe80", INFO(0x208014, 0, 64 * 1024, 16, 0) }, - { "m25pe16", INFO(0x208015, 0, 64 * 1024, 32, SECT_4K) }, - - { "m25px32", INFO(0x207116, 0, 64 * 1024, 64, SECT_4K) }, - { "m25px32-s0", INFO(0x207316, 0, 64 * 1024, 64, SECT_4K) }, - { "m25px32-s1", INFO(0x206316, 0, 64 * 1024, 64, SECT_4K) }, - { "m25px64", INFO(0x207117, 0, 64 * 1024, 128, 0) }, - - /* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */ - { "w25x10", INFO(0xef3011, 0, 64 * 1024, 2, SECT_4K) }, - { "w25x20", INFO(0xef3012, 0, 64 * 1024, 4, SECT_4K) }, - { "w25x40", INFO(0xef3013, 0, 64 * 1024, 8, SECT_4K) }, - { "w25x80", INFO(0xef3014, 0, 64 * 1024, 16, SECT_4K) }, - { "w25x16", INFO(0xef3015, 0, 64 * 1024, 32, SECT_4K) }, - { "w25x32", INFO(0xef3016, 0, 64 * 1024, 64, SECT_4K) }, - { "w25q32", INFO(0xef4016, 0, 64 * 1024, 64, SECT_4K) }, - { "w25q32dw", INFO(0xef6016, 0, 64 * 1024, 64, SECT_4K) }, - { "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) }, - { "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) }, - { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) }, - { "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) }, - { "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) }, - { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) }, - { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K) }, - - /* Catalyst / On Semiconductor -- non-JEDEC */ - { "cat25c11", CAT25_INFO( 16, 8, 16, 1, M25P_NO_ERASE | M25P_NO_FR) }, - { "cat25c03", CAT25_INFO( 32, 8, 16, 2, M25P_NO_ERASE | M25P_NO_FR) }, - { "cat25c09", CAT25_INFO( 128, 8, 32, 2, M25P_NO_ERASE | M25P_NO_FR) }, - { "cat25c17", CAT25_INFO( 256, 8, 32, 2, M25P_NO_ERASE | M25P_NO_FR) }, - { "cat25128", CAT25_INFO(2048, 8, 64, 2, M25P_NO_ERASE | M25P_NO_FR) }, - { }, -}; -MODULE_DEVICE_TABLE(spi, m25p_ids); - -static const struct spi_device_id *jedec_probe(struct spi_device *spi) -{ - int tmp; - u8 code = OPCODE_RDID; - u8 id[5]; - u32 jedec; - u16 ext_jedec; - struct flash_info *info; - - /* JEDEC also defines an optional "extended device information" - * string for after vendor-specific data, after the three bytes - * we use here. Supporting some chips might require using it. - */ - tmp = spi_write_then_read(spi, &code, 1, id, 5); - if (tmp < 0) { - pr_debug("%s: error %d reading JEDEC ID\n", - dev_name(&spi->dev), tmp); - return ERR_PTR(tmp); - } - jedec = id[0]; - jedec = jedec << 8; - jedec |= id[1]; - jedec = jedec << 8; - jedec |= id[2]; + /* Set up command buffer. */ + flash->command[0] = nor->erase_opcode; + m25p_addr2cmd(nor, offset, flash->command); - ext_jedec = id[3] << 8 | id[4]; + spi_write(flash->spi, flash->command, m25p_cmdsz(nor)); - for (tmp = 0; tmp < ARRAY_SIZE(m25p_ids) - 1; tmp++) { - info = (void *)m25p_ids[tmp].driver_data; - if (info->jedec_id == jedec) { - if (info->ext_id != 0 && info->ext_id != ext_jedec) - continue; - return &m25p_ids[tmp]; - } - } - dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec); - return ERR_PTR(-ENODEV); + return 0; } - /* * board specific setup should have ensured the SPI clock used here * matches what the READ command supports, at least until this driver @@ -934,196 +191,45 @@ static const struct spi_device_id *jedec_probe(struct spi_device *spi) */ static int m25p_probe(struct spi_device *spi) { - const struct spi_device_id *id = spi_get_device_id(spi); - struct flash_platform_data *data; - struct m25p *flash; - struct flash_info *info; - unsigned i; struct mtd_part_parser_data ppdata; - struct device_node __maybe_unused *np = spi->dev.of_node; - -#ifdef CONFIG_MTD_OF_PARTS - if (!of_device_is_available(np)) - return -ENODEV; -#endif - - /* Platform data helps sort out which chip type we have, as - * well as how this board partitions it. If we don't have - * a chip ID, try the JEDEC id commands; they'll work for most - * newer chips, even if we don't recognize the particular chip. - */ - data = dev_get_platdata(&spi->dev); - if (data && data->type) { - const struct spi_device_id *plat_id; - - for (i = 0; i < ARRAY_SIZE(m25p_ids) - 1; i++) { - plat_id = &m25p_ids[i]; - if (strcmp(data->type, plat_id->name)) - continue; - break; - } - - if (i < ARRAY_SIZE(m25p_ids) - 1) - id = plat_id; - else - dev_warn(&spi->dev, "unrecognized id %s\n", data->type); - } - - info = (void *)id->driver_data; - - if (info->jedec_id) { - const struct spi_device_id *jid; - - jid = jedec_probe(spi); - if (IS_ERR(jid)) { - return PTR_ERR(jid); - } else if (jid != id) { - /* - * JEDEC knows better, so overwrite platform ID. We - * can't trust partitions any longer, but we'll let - * mtd apply them anyway, since some partitions may be - * marked read-only, and we don't want to lose that - * information, even if it's not 100% accurate. - */ - dev_warn(&spi->dev, "found %s, expected %s\n", - jid->name, id->name); - id = jid; - info = (void *)jid->driver_data; - } - } + struct flash_platform_data *data; + struct m25p *flash; + struct spi_nor *nor; + enum read_mode mode = SPI_NOR_NORMAL; + int ret; - flash = kzalloc(sizeof *flash, GFP_KERNEL); + flash = devm_kzalloc(&spi->dev, sizeof(*flash), GFP_KERNEL); if (!flash) return -ENOMEM; - flash->command = kmalloc(MAX_CMD_SIZE + (flash->fast_read ? 1 : 0), - GFP_KERNEL); - if (!flash->command) { - kfree(flash); - return -ENOMEM; - } - flash->spi = spi; - mutex_init(&flash->lock); - spi_set_drvdata(spi, flash); + nor = &flash->spi_nor; - /* - * Atmel, SST and Intel/Numonyx serial flash tend to power - * up with the software protection bits set - */ - - if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ATMEL || - JEDEC_MFR(info->jedec_id) == CFI_MFR_INTEL || - JEDEC_MFR(info->jedec_id) == CFI_MFR_SST) { - write_enable(flash); - write_sr(flash, 0); - } - - if (data && data->name) - flash->mtd.name = data->name; - else - flash->mtd.name = dev_name(&spi->dev); - - flash->mtd.type = MTD_NORFLASH; - flash->mtd.writesize = 1; - flash->mtd.flags = MTD_CAP_NORFLASH; - flash->mtd.size = info->sector_size * info->n_sectors; - flash->mtd._erase = m25p80_erase; - flash->mtd._read = m25p80_read; - - /* flash protection support for STmicro chips */ - if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ST) { - flash->mtd._lock = m25p80_lock; - flash->mtd._unlock = m25p80_unlock; - } + /* install the hooks */ + nor->read = m25p80_read; + nor->write = m25p80_write; + nor->erase = m25p80_erase; + nor->write_reg = m25p80_write_reg; + nor->read_reg = m25p80_read_reg; - /* sst flash chips use AAI word program */ - if (info->flags & SST_WRITE) - flash->mtd._write = sst_write; - else - flash->mtd._write = m25p80_write; + nor->dev = &spi->dev; + nor->mtd = &flash->mtd; + nor->priv = flash; - /* prefer "small sector" erase if possible */ - if (info->flags & SECT_4K) { - flash->erase_opcode = OPCODE_BE_4K; - flash->mtd.erasesize = 4096; - } else if (info->flags & SECT_4K_PMC) { - flash->erase_opcode = OPCODE_BE_4K_PMC; - flash->mtd.erasesize = 4096; - } else { - flash->erase_opcode = OPCODE_SE; - flash->mtd.erasesize = info->sector_size; - } + spi_set_drvdata(spi, flash); + flash->mtd.priv = nor; + flash->spi = spi; - if (info->flags & M25P_NO_ERASE) - flash->mtd.flags |= MTD_NO_ERASE; + if (spi->mode & SPI_RX_QUAD) + mode = SPI_NOR_QUAD; + else if (spi->mode & SPI_RX_DUAL) + mode = SPI_NOR_DUAL; + ret = spi_nor_scan(nor, spi_get_device_id(spi), mode); + if (ret) + return ret; + data = dev_get_platdata(&spi->dev); ppdata.of_node = spi->dev.of_node; - flash->mtd.dev.parent = &spi->dev; - flash->page_size = info->page_size; - flash->mtd.writebufsize = flash->page_size; - - flash->fast_read = false; - if (np && of_property_read_bool(np, "m25p,fast-read")) - flash->fast_read = true; - -#ifdef CONFIG_M25PXX_USE_FAST_READ - flash->fast_read = true; -#endif - if (info->flags & M25P_NO_FR) - flash->fast_read = false; - - /* Default commands */ - if (flash->fast_read) - flash->read_opcode = OPCODE_FAST_READ; - else - flash->read_opcode = OPCODE_NORM_READ; - - flash->program_opcode = OPCODE_PP; - if (info->addr_width) - flash->addr_width = info->addr_width; - else if (flash->mtd.size > 0x1000000) { - /* enable 4-byte addressing if the device exceeds 16MiB */ - flash->addr_width = 4; - if (JEDEC_MFR(info->jedec_id) == CFI_MFR_AMD) { - /* Dedicated 4-byte command set */ - flash->read_opcode = flash->fast_read ? - OPCODE_FAST_READ_4B : - OPCODE_NORM_READ_4B; - flash->program_opcode = OPCODE_PP_4B; - /* No small sector erase for 4-byte command set */ - flash->erase_opcode = OPCODE_SE_4B; - flash->mtd.erasesize = info->sector_size; - } else - set_4byte(flash, info->jedec_id, 1); - } else { - flash->addr_width = 3; - } - - dev_info(&spi->dev, "%s (%lld Kbytes)\n", id->name, - (long long)flash->mtd.size >> 10); - - pr_debug("mtd .name = %s, .size = 0x%llx (%lldMiB) " - ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n", - flash->mtd.name, - (long long)flash->mtd.size, (long long)(flash->mtd.size >> 20), - flash->mtd.erasesize, flash->mtd.erasesize / 1024, - flash->mtd.numeraseregions); - - if (flash->mtd.numeraseregions) - for (i = 0; i < flash->mtd.numeraseregions; i++) - pr_debug("mtd.eraseregions[%d] = { .offset = 0x%llx, " - ".erasesize = 0x%.8x (%uKiB), " - ".numblocks = %d }\n", - i, (long long)flash->mtd.eraseregions[i].offset, - flash->mtd.eraseregions[i].erasesize, - flash->mtd.eraseregions[i].erasesize / 1024, - flash->mtd.eraseregions[i].numblocks); - - - /* partitions should match sector boundaries; and it may be good to - * use readonly partitions for writeprotected sectors (BP2..BP0). - */ return mtd_device_parse_register(&flash->mtd, NULL, &ppdata, data ? data->parts : NULL, data ? data->nr_parts : 0); @@ -1133,15 +239,9 @@ static int m25p_probe(struct spi_device *spi) static int m25p_remove(struct spi_device *spi) { struct m25p *flash = spi_get_drvdata(spi); - int status; /* Clean up MTD stuff. */ - status = mtd_device_unregister(&flash->mtd); - if (status == 0) { - kfree(flash->command); - kfree(flash); - } - return 0; + return mtd_device_unregister(&flash->mtd); } @@ -1150,7 +250,7 @@ static struct spi_driver m25p80_driver = { .name = "m25p80", .owner = THIS_MODULE, }, - .id_table = m25p_ids, + .id_table = spi_nor_ids, .probe = m25p_probe, .remove = m25p_remove, diff --git a/drivers/mtd/devices/ms02-nv.c b/drivers/mtd/devices/ms02-nv.c index 182849d39c6..5c8b322ba90 100644 --- a/drivers/mtd/devices/ms02-nv.c +++ b/drivers/mtd/devices/ms02-nv.c @@ -205,7 +205,7 @@ static int __init ms02nv_init_one(ulong addr) mtd->type = MTD_RAM; mtd->flags = MTD_CAP_RAM; mtd->size = fixsize; - mtd->name = (char *)ms02nv_name; + mtd->name = ms02nv_name; mtd->owner = THIS_MODULE; mtd->_read = ms02nv_read; mtd->_write = ms02nv_write; diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index 0e8cbfeba11..dd22ce2cc9a 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -10,7 +10,6 @@ * 2 of the License, or (at your option) any later version. */ #include <linux/module.h> -#include <linux/init.h> #include <linux/slab.h> #include <linux/delay.h> #include <linux/device.h> @@ -88,8 +87,6 @@ struct dataflash { uint8_t command[4]; char name[24]; - unsigned partitioned:1; - unsigned short page_offset; /* offset in flash address */ unsigned int page_size; /* of bytes per page */ @@ -442,8 +439,8 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, #ifdef CONFIG_MTD_DATAFLASH_OTP -static int dataflash_get_otp_info(struct mtd_info *mtd, - struct otp_info *info, size_t len) +static int dataflash_get_otp_info(struct mtd_info *mtd, size_t len, + size_t *retlen, struct otp_info *info) { /* Report both blocks as identical: bytes 0..64, locked. * Unless the user block changed from all-ones, we can't @@ -452,7 +449,8 @@ static int dataflash_get_otp_info(struct mtd_info *mtd, info->start = 0; info->length = 64; info->locked = 1; - return sizeof(*info); + *retlen = sizeof(*info); + return 0; } static ssize_t otp_read(struct spi_device *spi, unsigned base, @@ -544,14 +542,18 @@ static int dataflash_write_user_otp(struct mtd_info *mtd, struct dataflash *priv = mtd->priv; int status; - if (len > 64) - return -EINVAL; + if (from >= 64) { + /* + * Attempting to write beyond the end of OTP memory, + * no data can be written. + */ + *retlen = 0; + return 0; + } - /* Strictly speaking, we *could* truncate the write ... but - * let's not do that for the only write that's ever possible. - */ + /* Truncate the write to fit into OTP memory. */ if ((from + len) > 64) - return -EINVAL; + len = 64 - from; /* OUT: OP_WRITE_SECURITY, 3 zeroes, 64 data-or-zero bytes * IN: ignore all @@ -671,7 +673,6 @@ static int add_dataflash_otp(struct spi_device *spi, char *name, int nr_pages, if (!err) return 0; - spi_set_drvdata(spi, NULL); kfree(priv); return err; } @@ -881,7 +882,7 @@ static int dataflash_probe(struct spi_device *spi) break; /* obsolete AT45DB1282 not (yet?) supported */ default: - pr_debug("%s: unsupported device (%x)\n", dev_name(&spi->dev), + dev_info(&spi->dev, "unsupported device (%x)\n", status & 0x3c); status = -ENODEV; } @@ -901,10 +902,8 @@ static int dataflash_remove(struct spi_device *spi) pr_debug("%s: remove\n", dev_name(&spi->dev)); status = mtd_device_unregister(&flash->mtd); - if (status == 0) { - spi_set_drvdata(spi, NULL); + if (status == 0) kfree(flash); - } return status; } diff --git a/drivers/mtd/devices/mtdram.c b/drivers/mtd/devices/mtdram.c index ec59d65897f..8e285089229 100644 --- a/drivers/mtd/devices/mtdram.c +++ b/drivers/mtd/devices/mtdram.c @@ -92,7 +92,7 @@ static void __exit cleanup_mtdram(void) } int mtdram_init_device(struct mtd_info *mtd, void *mapped_address, - unsigned long size, char *name) + unsigned long size, const char *name) { memset(mtd, 0, sizeof(*mtd)); diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c index 67823de68db..2cceebfb251 100644 --- a/drivers/mtd/devices/phram.c +++ b/drivers/mtd/devices/phram.c @@ -94,7 +94,7 @@ static void unregister_devices(void) } } -static int register_device(char *name, unsigned long start, unsigned long len) +static int register_device(char *name, phys_addr_t start, size_t len) { struct phram_mtd_list *new; int ret = -ENOMEM; @@ -141,35 +141,35 @@ out0: return ret; } -static int ustrtoul(const char *cp, char **endp, unsigned int base) +static int parse_num64(uint64_t *num64, char *token) { - unsigned long result = simple_strtoul(cp, endp, base); - - switch (**endp) { - case 'G': - result *= 1024; - case 'M': - result *= 1024; - case 'k': - result *= 1024; + size_t len; + int shift = 0; + int ret; + + len = strlen(token); /* By dwmw2 editorial decree, "ki", "Mi" or "Gi" are to be used. */ - if ((*endp)[1] == 'i') - (*endp) += 2; + if (len > 2) { + if (token[len - 1] == 'i') { + switch (token[len - 2]) { + case 'G': + shift += 10; + case 'M': + shift += 10; + case 'k': + shift += 10; + token[len - 2] = 0; + break; + default: + return -EINVAL; + } + } } - return result; -} - -static int parse_num32(uint32_t *num32, const char *token) -{ - char *endp; - unsigned long n; - n = ustrtoul(token, &endp, 0); - if (*endp) - return -EINVAL; + ret = kstrtou64(token, 0, num64); + *num64 <<= shift; - *num32 = n; - return 0; + return ret; } static int parse_name(char **pname, const char *token) @@ -205,23 +205,26 @@ static inline void kill_final_newline(char *str) return 1; \ } while (0) +#ifndef MODULE +static int phram_init_called; /* * This shall contain the module parameter if any. It is of the form: * - phram=<device>,<address>,<size> for module case * - phram.phram=<device>,<address>,<size> for built-in case - * We leave 64 bytes for the device name, 12 for the address and 12 for the + * We leave 64 bytes for the device name, 20 for the address and 20 for the * size. * Example: phram.phram=rootfs,0xa0000000,512Mi */ -static __initdata char phram_paramline[64+12+12]; +static char phram_paramline[64 + 20 + 20]; +#endif -static int __init phram_setup(const char *val) +static int phram_setup(const char *val) { - char buf[64+12+12], *str = buf; + char buf[64 + 20 + 20], *str = buf; char *token[3]; char *name; - uint32_t start; - uint32_t len; + uint64_t start; + uint64_t len; int i, ret; if (strnlen(val, sizeof(buf)) >= sizeof(buf)) @@ -243,13 +246,13 @@ static int __init phram_setup(const char *val) if (ret) return ret; - ret = parse_num32(&start, token[1]); + ret = parse_num64(&start, token[1]); if (ret) { kfree(name); parse_err("illegal start address\n"); } - ret = parse_num32(&len, token[2]); + ret = parse_num64(&len, token[2]); if (ret) { kfree(name); parse_err("illegal device length\n"); @@ -257,24 +260,43 @@ static int __init phram_setup(const char *val) ret = register_device(name, start, len); if (!ret) - pr_info("%s device: %#x at %#x\n", name, len, start); + pr_info("%s device: %#llx at %#llx\n", name, len, start); else kfree(name); return ret; } -static int __init phram_param_call(const char *val, struct kernel_param *kp) +static int phram_param_call(const char *val, struct kernel_param *kp) { +#ifdef MODULE + return phram_setup(val); +#else /* - * This function is always called before 'init_phram()', whether - * built-in or module. + * If more parameters are later passed in via + * /sys/module/phram/parameters/phram + * and init_phram() has already been called, + * we can parse the argument now. */ + + if (phram_init_called) + return phram_setup(val); + + /* + * During early boot stage, we only save the parameters + * here. We must parse them later: if the param passed + * from kernel boot command line, phram_param_call() is + * called so early that it is not possible to resolve + * the device (even kmalloc() fails). Defer that work to + * phram_setup(). + */ + if (strlen(val) >= sizeof(phram_paramline)) return -ENOSPC; strcpy(phram_paramline, val); return 0; +#endif } module_param_call(phram, phram_param_call, NULL, NULL, 000); @@ -283,10 +305,15 @@ MODULE_PARM_DESC(phram, "Memory region to map. \"phram=<name>,<start>,<length>\" static int __init init_phram(void) { + int ret = 0; + +#ifndef MODULE if (phram_paramline[0]) - return phram_setup(phram_paramline); + ret = phram_setup(phram_paramline); + phram_init_called = 1; +#endif - return 0; + return ret; } static void __exit cleanup_phram(void) diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c index 0c51b988e1f..f02603e1bfe 100644 --- a/drivers/mtd/devices/pmc551.c +++ b/drivers/mtd/devices/pmc551.c @@ -725,16 +725,11 @@ static int __init init_pmc551(void) } mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL); - if (!mtd) { - printk(KERN_NOTICE "pmc551: Cannot allocate new MTD " - "device.\n"); + if (!mtd) break; - } priv = kzalloc(sizeof(struct mypriv), GFP_KERNEL); if (!priv) { - printk(KERN_NOTICE "pmc551: Cannot allocate new MTD " - "device.\n"); kfree(mtd); break; } diff --git a/drivers/mtd/devices/serial_flash_cmds.h b/drivers/mtd/devices/serial_flash_cmds.h new file mode 100644 index 00000000000..f59a125295d --- /dev/null +++ b/drivers/mtd/devices/serial_flash_cmds.h @@ -0,0 +1,61 @@ +/* + * Generic/SFDP Flash Commands and Device Capabilities + * + * Copyright (C) 2013 Lee Jones <lee.jones@lianro.org> + * + * This code is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _MTD_SERIAL_FLASH_CMDS_H +#define _MTD_SERIAL_FLASH_CMDS_H + +/* Generic Flash Commands/OPCODEs */ +#define SPINOR_OP_RDSR2 0x35 +#define SPINOR_OP_WRVCR 0x81 +#define SPINOR_OP_RDVCR 0x85 + +/* JEDEC Standard - Serial Flash Discoverable Parmeters (SFDP) Commands */ +#define SPINOR_OP_READ_1_2_2 0xbb /* DUAL I/O READ */ +#define SPINOR_OP_READ_1_4_4 0xeb /* QUAD I/O READ */ + +#define SPINOR_OP_WRITE 0x02 /* PAGE PROGRAM */ +#define SPINOR_OP_WRITE_1_1_2 0xa2 /* DUAL INPUT PROGRAM */ +#define SPINOR_OP_WRITE_1_2_2 0xd2 /* DUAL INPUT EXT PROGRAM */ +#define SPINOR_OP_WRITE_1_1_4 0x32 /* QUAD INPUT PROGRAM */ +#define SPINOR_OP_WRITE_1_4_4 0x12 /* QUAD INPUT EXT PROGRAM */ + +/* READ commands with 32-bit addressing */ +#define SPINOR_OP_READ4_1_2_2 0xbc +#define SPINOR_OP_READ4_1_4_4 0xec + +/* Configuration flags */ +#define FLASH_FLAG_SINGLE 0x000000ff +#define FLASH_FLAG_READ_WRITE 0x00000001 +#define FLASH_FLAG_READ_FAST 0x00000002 +#define FLASH_FLAG_SE_4K 0x00000004 +#define FLASH_FLAG_SE_32K 0x00000008 +#define FLASH_FLAG_CE 0x00000010 +#define FLASH_FLAG_32BIT_ADDR 0x00000020 +#define FLASH_FLAG_RESET 0x00000040 +#define FLASH_FLAG_DYB_LOCKING 0x00000080 + +#define FLASH_FLAG_DUAL 0x0000ff00 +#define FLASH_FLAG_READ_1_1_2 0x00000100 +#define FLASH_FLAG_READ_1_2_2 0x00000200 +#define FLASH_FLAG_READ_2_2_2 0x00000400 +#define FLASH_FLAG_WRITE_1_1_2 0x00001000 +#define FLASH_FLAG_WRITE_1_2_2 0x00002000 +#define FLASH_FLAG_WRITE_2_2_2 0x00004000 + +#define FLASH_FLAG_QUAD 0x00ff0000 +#define FLASH_FLAG_READ_1_1_4 0x00010000 +#define FLASH_FLAG_READ_1_4_4 0x00020000 +#define FLASH_FLAG_READ_4_4_4 0x00040000 +#define FLASH_FLAG_WRITE_1_1_4 0x00100000 +#define FLASH_FLAG_WRITE_1_4_4 0x00200000 +#define FLASH_FLAG_WRITE_4_4_4 0x00400000 + +#endif /* _MTD_SERIAL_FLASH_CMDS_H */ diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c index 5a5cd2ace4a..2fc4957cbe7 100644 --- a/drivers/mtd/devices/slram.c +++ b/drivers/mtd/devices/slram.c @@ -280,14 +280,11 @@ __setup("slram=", mtd_slram_setup); static int __init init_slram(void) { char *devname; - int i; #ifndef MODULE char *devstart; char *devlength; - i = 0; - if (!map) { E("slram: not enough parameters.\n"); return(-EINVAL); @@ -314,6 +311,7 @@ static int __init init_slram(void) } #else int count; + int i; for (count = 0; count < SLRAM_MAX_DEVICES_PARAMS && map[count]; count++) { diff --git a/drivers/mtd/devices/spear_smi.c b/drivers/mtd/devices/spear_smi.c index 42382141206..c4176b0f382 100644 --- a/drivers/mtd/devices/spear_smi.c +++ b/drivers/mtd/devices/spear_smi.c @@ -6,7 +6,7 @@ * * Copyright © 2010 STMicroelectronics. * Ashish Priyadarshi - * Shiraz Hashim <shiraz.hashim@st.com> + * Shiraz Hashim <shiraz.linux.kernel@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -913,7 +913,6 @@ static int spear_smi_probe(struct platform_device *pdev) if (np) { pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) { - pr_err("%s: ERROR: no memory", __func__); ret = -ENOMEM; goto err; } @@ -943,7 +942,6 @@ static int spear_smi_probe(struct platform_device *pdev) dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_ATOMIC); if (!dev) { ret = -ENOMEM; - dev_err(&pdev->dev, "mem alloc fail\n"); goto err; } @@ -1091,5 +1089,5 @@ static struct platform_driver spear_smi_driver = { module_platform_driver(spear_smi_driver); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Ashish Priyadarshi, Shiraz Hashim <shiraz.hashim@st.com>"); +MODULE_AUTHOR("Ashish Priyadarshi, Shiraz Hashim <shiraz.linux.kernel@gmail.com>"); MODULE_DESCRIPTION("MTD SMI driver for serial nor flash chips"); diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c index a42f1f0e728..c63ecbcad0b 100644 --- a/drivers/mtd/devices/sst25l.c +++ b/drivers/mtd/devices/sst25l.c @@ -15,7 +15,6 @@ * */ -#include <linux/init.h> #include <linux/module.h> #include <linux/device.h> #include <linux/mutex.h> @@ -364,7 +363,7 @@ static int sst25l_probe(struct spi_device *spi) if (!flash_info) return -ENODEV; - flash = kzalloc(sizeof(struct sst25l_flash), GFP_KERNEL); + flash = devm_kzalloc(&spi->dev, sizeof(*flash), GFP_KERNEL); if (!flash) return -ENOMEM; @@ -402,11 +401,8 @@ static int sst25l_probe(struct spi_device *spi) ret = mtd_device_parse_register(&flash->mtd, NULL, NULL, data ? data->parts : NULL, data ? data->nr_parts : 0); - if (ret) { - kfree(flash); - spi_set_drvdata(spi, NULL); + if (ret) return -ENODEV; - } return 0; } @@ -414,12 +410,8 @@ static int sst25l_probe(struct spi_device *spi) static int sst25l_remove(struct spi_device *spi) { struct sst25l_flash *flash = spi_get_drvdata(spi); - int ret; - ret = mtd_device_unregister(&flash->mtd); - if (ret == 0) - kfree(flash); - return ret; + return mtd_device_unregister(&flash->mtd); } static struct spi_driver sst25l_driver = { diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c new file mode 100644 index 00000000000..d252514d3e9 --- /dev/null +++ b/drivers/mtd/devices/st_spi_fsm.c @@ -0,0 +1,2080 @@ +/* + * st_spi_fsm.c - ST Fast Sequence Mode (FSM) Serial Flash Controller + * + * Author: Angus Clark <angus.clark@st.com> + * + * Copyright (C) 2010-2014 STMicroelectronics Limited + * + * JEDEC probe based on drivers/mtd/devices/m25p80.c + * + * This code is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/platform_device.h> +#include <linux/mfd/syscon.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/spi-nor.h> +#include <linux/sched.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/of.h> + +#include "serial_flash_cmds.h" + +/* + * FSM SPI Controller Registers + */ +#define SPI_CLOCKDIV 0x0010 +#define SPI_MODESELECT 0x0018 +#define SPI_CONFIGDATA 0x0020 +#define SPI_STA_MODE_CHANGE 0x0028 +#define SPI_FAST_SEQ_TRANSFER_SIZE 0x0100 +#define SPI_FAST_SEQ_ADD1 0x0104 +#define SPI_FAST_SEQ_ADD2 0x0108 +#define SPI_FAST_SEQ_ADD_CFG 0x010c +#define SPI_FAST_SEQ_OPC1 0x0110 +#define SPI_FAST_SEQ_OPC2 0x0114 +#define SPI_FAST_SEQ_OPC3 0x0118 +#define SPI_FAST_SEQ_OPC4 0x011c +#define SPI_FAST_SEQ_OPC5 0x0120 +#define SPI_MODE_BITS 0x0124 +#define SPI_DUMMY_BITS 0x0128 +#define SPI_FAST_SEQ_FLASH_STA_DATA 0x012c +#define SPI_FAST_SEQ_1 0x0130 +#define SPI_FAST_SEQ_2 0x0134 +#define SPI_FAST_SEQ_3 0x0138 +#define SPI_FAST_SEQ_4 0x013c +#define SPI_FAST_SEQ_CFG 0x0140 +#define SPI_FAST_SEQ_STA 0x0144 +#define SPI_QUAD_BOOT_SEQ_INIT_1 0x0148 +#define SPI_QUAD_BOOT_SEQ_INIT_2 0x014c +#define SPI_QUAD_BOOT_READ_SEQ_1 0x0150 +#define SPI_QUAD_BOOT_READ_SEQ_2 0x0154 +#define SPI_PROGRAM_ERASE_TIME 0x0158 +#define SPI_MULT_PAGE_REPEAT_SEQ_1 0x015c +#define SPI_MULT_PAGE_REPEAT_SEQ_2 0x0160 +#define SPI_STATUS_WR_TIME_REG 0x0164 +#define SPI_FAST_SEQ_DATA_REG 0x0300 + +/* + * Register: SPI_MODESELECT + */ +#define SPI_MODESELECT_CONTIG 0x01 +#define SPI_MODESELECT_FASTREAD 0x02 +#define SPI_MODESELECT_DUALIO 0x04 +#define SPI_MODESELECT_FSM 0x08 +#define SPI_MODESELECT_QUADBOOT 0x10 + +/* + * Register: SPI_CONFIGDATA + */ +#define SPI_CFG_DEVICE_ST 0x1 +#define SPI_CFG_DEVICE_ATMEL 0x4 +#define SPI_CFG_MIN_CS_HIGH(x) (((x) & 0xfff) << 4) +#define SPI_CFG_CS_SETUPHOLD(x) (((x) & 0xff) << 16) +#define SPI_CFG_DATA_HOLD(x) (((x) & 0xff) << 24) + +#define SPI_CFG_DEFAULT_MIN_CS_HIGH SPI_CFG_MIN_CS_HIGH(0x0AA) +#define SPI_CFG_DEFAULT_CS_SETUPHOLD SPI_CFG_CS_SETUPHOLD(0xA0) +#define SPI_CFG_DEFAULT_DATA_HOLD SPI_CFG_DATA_HOLD(0x00) + +/* + * Register: SPI_FAST_SEQ_TRANSFER_SIZE + */ +#define TRANSFER_SIZE(x) ((x) * 8) + +/* + * Register: SPI_FAST_SEQ_ADD_CFG + */ +#define ADR_CFG_CYCLES_ADD1(x) ((x) << 0) +#define ADR_CFG_PADS_1_ADD1 (0x0 << 6) +#define ADR_CFG_PADS_2_ADD1 (0x1 << 6) +#define ADR_CFG_PADS_4_ADD1 (0x3 << 6) +#define ADR_CFG_CSDEASSERT_ADD1 (1 << 8) +#define ADR_CFG_CYCLES_ADD2(x) ((x) << (0+16)) +#define ADR_CFG_PADS_1_ADD2 (0x0 << (6+16)) +#define ADR_CFG_PADS_2_ADD2 (0x1 << (6+16)) +#define ADR_CFG_PADS_4_ADD2 (0x3 << (6+16)) +#define ADR_CFG_CSDEASSERT_ADD2 (1 << (8+16)) + +/* + * Register: SPI_FAST_SEQ_n + */ +#define SEQ_OPC_OPCODE(x) ((x) << 0) +#define SEQ_OPC_CYCLES(x) ((x) << 8) +#define SEQ_OPC_PADS_1 (0x0 << 14) +#define SEQ_OPC_PADS_2 (0x1 << 14) +#define SEQ_OPC_PADS_4 (0x3 << 14) +#define SEQ_OPC_CSDEASSERT (1 << 16) + +/* + * Register: SPI_FAST_SEQ_CFG + */ +#define SEQ_CFG_STARTSEQ (1 << 0) +#define SEQ_CFG_SWRESET (1 << 5) +#define SEQ_CFG_CSDEASSERT (1 << 6) +#define SEQ_CFG_READNOTWRITE (1 << 7) +#define SEQ_CFG_ERASE (1 << 8) +#define SEQ_CFG_PADS_1 (0x0 << 16) +#define SEQ_CFG_PADS_2 (0x1 << 16) +#define SEQ_CFG_PADS_4 (0x3 << 16) + +/* + * Register: SPI_MODE_BITS + */ +#define MODE_DATA(x) (x & 0xff) +#define MODE_CYCLES(x) ((x & 0x3f) << 16) +#define MODE_PADS_1 (0x0 << 22) +#define MODE_PADS_2 (0x1 << 22) +#define MODE_PADS_4 (0x3 << 22) +#define DUMMY_CSDEASSERT (1 << 24) + +/* + * Register: SPI_DUMMY_BITS + */ +#define DUMMY_CYCLES(x) ((x & 0x3f) << 16) +#define DUMMY_PADS_1 (0x0 << 22) +#define DUMMY_PADS_2 (0x1 << 22) +#define DUMMY_PADS_4 (0x3 << 22) +#define DUMMY_CSDEASSERT (1 << 24) + +/* + * Register: SPI_FAST_SEQ_FLASH_STA_DATA + */ +#define STA_DATA_BYTE1(x) ((x & 0xff) << 0) +#define STA_DATA_BYTE2(x) ((x & 0xff) << 8) +#define STA_PADS_1 (0x0 << 16) +#define STA_PADS_2 (0x1 << 16) +#define STA_PADS_4 (0x3 << 16) +#define STA_CSDEASSERT (0x1 << 20) +#define STA_RDNOTWR (0x1 << 21) + +/* + * FSM SPI Instruction Opcodes + */ +#define STFSM_OPC_CMD 0x1 +#define STFSM_OPC_ADD 0x2 +#define STFSM_OPC_STA 0x3 +#define STFSM_OPC_MODE 0x4 +#define STFSM_OPC_DUMMY 0x5 +#define STFSM_OPC_DATA 0x6 +#define STFSM_OPC_WAIT 0x7 +#define STFSM_OPC_JUMP 0x8 +#define STFSM_OPC_GOTO 0x9 +#define STFSM_OPC_STOP 0xF + +/* + * FSM SPI Instructions (== opcode + operand). + */ +#define STFSM_INSTR(cmd, op) ((cmd) | ((op) << 4)) + +#define STFSM_INST_CMD1 STFSM_INSTR(STFSM_OPC_CMD, 1) +#define STFSM_INST_CMD2 STFSM_INSTR(STFSM_OPC_CMD, 2) +#define STFSM_INST_CMD3 STFSM_INSTR(STFSM_OPC_CMD, 3) +#define STFSM_INST_CMD4 STFSM_INSTR(STFSM_OPC_CMD, 4) +#define STFSM_INST_CMD5 STFSM_INSTR(STFSM_OPC_CMD, 5) +#define STFSM_INST_ADD1 STFSM_INSTR(STFSM_OPC_ADD, 1) +#define STFSM_INST_ADD2 STFSM_INSTR(STFSM_OPC_ADD, 2) + +#define STFSM_INST_DATA_WRITE STFSM_INSTR(STFSM_OPC_DATA, 1) +#define STFSM_INST_DATA_READ STFSM_INSTR(STFSM_OPC_DATA, 2) + +#define STFSM_INST_STA_RD1 STFSM_INSTR(STFSM_OPC_STA, 0x1) +#define STFSM_INST_STA_WR1 STFSM_INSTR(STFSM_OPC_STA, 0x1) +#define STFSM_INST_STA_RD2 STFSM_INSTR(STFSM_OPC_STA, 0x2) +#define STFSM_INST_STA_WR1_2 STFSM_INSTR(STFSM_OPC_STA, 0x3) + +#define STFSM_INST_MODE STFSM_INSTR(STFSM_OPC_MODE, 0) +#define STFSM_INST_DUMMY STFSM_INSTR(STFSM_OPC_DUMMY, 0) +#define STFSM_INST_WAIT STFSM_INSTR(STFSM_OPC_WAIT, 0) +#define STFSM_INST_STOP STFSM_INSTR(STFSM_OPC_STOP, 0) + +#define STFSM_DEFAULT_EMI_FREQ 100000000UL /* 100 MHz */ +#define STFSM_DEFAULT_WR_TIME (STFSM_DEFAULT_EMI_FREQ * (15/1000)) /* 15ms */ + +#define STFSM_FLASH_SAFE_FREQ 10000000UL /* 10 MHz */ + +#define STFSM_MAX_WAIT_SEQ_MS 1000 /* FSM execution time */ + +/* S25FLxxxS commands */ +#define S25FL_CMD_WRITE4_1_1_4 0x34 +#define S25FL_CMD_SE4 0xdc +#define S25FL_CMD_CLSR 0x30 +#define S25FL_CMD_DYBWR 0xe1 +#define S25FL_CMD_DYBRD 0xe0 +#define S25FL_CMD_WRITE4 0x12 /* Note, opcode clashes with + * 'SPINOR_OP_WRITE_1_4_4' + * as found on N25Qxxx devices! */ + +/* Status register */ +#define FLASH_STATUS_BUSY 0x01 +#define FLASH_STATUS_WEL 0x02 +#define FLASH_STATUS_BP0 0x04 +#define FLASH_STATUS_BP1 0x08 +#define FLASH_STATUS_BP2 0x10 +#define FLASH_STATUS_SRWP0 0x80 +#define FLASH_STATUS_TIMEOUT 0xff +/* S25FL Error Flags */ +#define S25FL_STATUS_E_ERR 0x20 +#define S25FL_STATUS_P_ERR 0x40 + +#define N25Q_CMD_WRVCR 0x81 +#define N25Q_CMD_RDVCR 0x85 +#define N25Q_CMD_RDVECR 0x65 +#define N25Q_CMD_RDNVCR 0xb5 +#define N25Q_CMD_WRNVCR 0xb1 + +#define FLASH_PAGESIZE 256 /* In Bytes */ +#define FLASH_PAGESIZE_32 (FLASH_PAGESIZE / 4) /* In uint32_t */ +#define FLASH_MAX_BUSY_WAIT (300 * HZ) /* Maximum 'CHIPERASE' time */ + +/* + * Flags to tweak operation of default read/write/erase routines + */ +#define CFG_READ_TOGGLE_32BIT_ADDR 0x00000001 +#define CFG_WRITE_TOGGLE_32BIT_ADDR 0x00000002 +#define CFG_ERASESEC_TOGGLE_32BIT_ADDR 0x00000008 +#define CFG_S25FL_CHECK_ERROR_FLAGS 0x00000010 + +struct stfsm_seq { + uint32_t data_size; + uint32_t addr1; + uint32_t addr2; + uint32_t addr_cfg; + uint32_t seq_opc[5]; + uint32_t mode; + uint32_t dummy; + uint32_t status; + uint8_t seq[16]; + uint32_t seq_cfg; +} __packed __aligned(4); + +struct stfsm { + struct device *dev; + void __iomem *base; + struct resource *region; + struct mtd_info mtd; + struct mutex lock; + struct flash_info *info; + + uint32_t configuration; + uint32_t fifo_dir_delay; + bool booted_from_spi; + bool reset_signal; + bool reset_por; + + struct stfsm_seq stfsm_seq_read; + struct stfsm_seq stfsm_seq_write; + struct stfsm_seq stfsm_seq_en_32bit_addr; +}; + +/* Parameters to configure a READ or WRITE FSM sequence */ +struct seq_rw_config { + uint32_t flags; /* flags to support config */ + uint8_t cmd; /* FLASH command */ + int write; /* Write Sequence */ + uint8_t addr_pads; /* No. of addr pads (MODE & DUMMY) */ + uint8_t data_pads; /* No. of data pads */ + uint8_t mode_data; /* MODE data */ + uint8_t mode_cycles; /* No. of MODE cycles */ + uint8_t dummy_cycles; /* No. of DUMMY cycles */ +}; + +/* SPI Flash Device Table */ +struct flash_info { + char *name; + /* + * JEDEC id zero means "no ID" (most older chips); otherwise it has + * a high byte of zero plus three data bytes: the manufacturer id, + * then a two byte device id. + */ + u32 jedec_id; + u16 ext_id; + /* + * The size listed here is what works with SPINOR_OP_SE, which isn't + * necessarily called a "sector" by the vendor. + */ + unsigned sector_size; + u16 n_sectors; + u32 flags; + /* + * Note, where FAST_READ is supported, freq_max specifies the + * FAST_READ frequency, not the READ frequency. + */ + u32 max_freq; + int (*config)(struct stfsm *); +}; + +static int stfsm_n25q_config(struct stfsm *fsm); +static int stfsm_mx25_config(struct stfsm *fsm); +static int stfsm_s25fl_config(struct stfsm *fsm); +static int stfsm_w25q_config(struct stfsm *fsm); + +static struct flash_info flash_types[] = { + /* + * ST Microelectronics/Numonyx -- + * (newer production versions may have feature updates + * (eg faster operating frequency) + */ +#define M25P_FLAG (FLASH_FLAG_READ_WRITE | FLASH_FLAG_READ_FAST) + { "m25p40", 0x202013, 0, 64 * 1024, 8, M25P_FLAG, 25, NULL }, + { "m25p80", 0x202014, 0, 64 * 1024, 16, M25P_FLAG, 25, NULL }, + { "m25p16", 0x202015, 0, 64 * 1024, 32, M25P_FLAG, 25, NULL }, + { "m25p32", 0x202016, 0, 64 * 1024, 64, M25P_FLAG, 50, NULL }, + { "m25p64", 0x202017, 0, 64 * 1024, 128, M25P_FLAG, 50, NULL }, + { "m25p128", 0x202018, 0, 256 * 1024, 64, M25P_FLAG, 50, NULL }, + +#define M25PX_FLAG (FLASH_FLAG_READ_WRITE | \ + FLASH_FLAG_READ_FAST | \ + FLASH_FLAG_READ_1_1_2 | \ + FLASH_FLAG_WRITE_1_1_2) + { "m25px32", 0x207116, 0, 64 * 1024, 64, M25PX_FLAG, 75, NULL }, + { "m25px64", 0x207117, 0, 64 * 1024, 128, M25PX_FLAG, 75, NULL }, + + /* Macronix MX25xxx + * - Support for 'FLASH_FLAG_WRITE_1_4_4' is omitted for devices + * where operating frequency must be reduced. + */ +#define MX25_FLAG (FLASH_FLAG_READ_WRITE | \ + FLASH_FLAG_READ_FAST | \ + FLASH_FLAG_READ_1_1_2 | \ + FLASH_FLAG_READ_1_2_2 | \ + FLASH_FLAG_READ_1_1_4 | \ + FLASH_FLAG_SE_4K | \ + FLASH_FLAG_SE_32K) + { "mx25l3255e", 0xc29e16, 0, 64 * 1024, 64, + (MX25_FLAG | FLASH_FLAG_WRITE_1_4_4), 86, + stfsm_mx25_config}, + { "mx25l25635e", 0xc22019, 0, 64*1024, 512, + (MX25_FLAG | FLASH_FLAG_32BIT_ADDR | FLASH_FLAG_RESET), 70, + stfsm_mx25_config }, + { "mx25l25655e", 0xc22619, 0, 64*1024, 512, + (MX25_FLAG | FLASH_FLAG_32BIT_ADDR | FLASH_FLAG_RESET), 70, + stfsm_mx25_config}, + +#define N25Q_FLAG (FLASH_FLAG_READ_WRITE | \ + FLASH_FLAG_READ_FAST | \ + FLASH_FLAG_READ_1_1_2 | \ + FLASH_FLAG_READ_1_2_2 | \ + FLASH_FLAG_READ_1_1_4 | \ + FLASH_FLAG_READ_1_4_4 | \ + FLASH_FLAG_WRITE_1_1_2 | \ + FLASH_FLAG_WRITE_1_2_2 | \ + FLASH_FLAG_WRITE_1_1_4 | \ + FLASH_FLAG_WRITE_1_4_4) + { "n25q128", 0x20ba18, 0, 64 * 1024, 256, N25Q_FLAG, 108, + stfsm_n25q_config }, + { "n25q256", 0x20ba19, 0, 64 * 1024, 512, + N25Q_FLAG | FLASH_FLAG_32BIT_ADDR, 108, stfsm_n25q_config }, + + /* + * Spansion S25FLxxxP + * - 256KiB and 64KiB sector variants (identified by ext. JEDEC) + */ +#define S25FLXXXP_FLAG (FLASH_FLAG_READ_WRITE | \ + FLASH_FLAG_READ_1_1_2 | \ + FLASH_FLAG_READ_1_2_2 | \ + FLASH_FLAG_READ_1_1_4 | \ + FLASH_FLAG_READ_1_4_4 | \ + FLASH_FLAG_WRITE_1_1_4 | \ + FLASH_FLAG_READ_FAST) + { "s25fl032p", 0x010215, 0x4d00, 64 * 1024, 64, S25FLXXXP_FLAG, 80, + stfsm_s25fl_config}, + { "s25fl129p0", 0x012018, 0x4d00, 256 * 1024, 64, S25FLXXXP_FLAG, 80, + stfsm_s25fl_config }, + { "s25fl129p1", 0x012018, 0x4d01, 64 * 1024, 256, S25FLXXXP_FLAG, 80, + stfsm_s25fl_config }, + + /* + * Spansion S25FLxxxS + * - 256KiB and 64KiB sector variants (identified by ext. JEDEC) + * - RESET# signal supported by die but not bristled out on all + * package types. The package type is a function of board design, + * so this information is captured in the board's flags. + * - Supports 'DYB' sector protection. Depending on variant, sectors + * may default to locked state on power-on. + */ +#define S25FLXXXS_FLAG (S25FLXXXP_FLAG | \ + FLASH_FLAG_RESET | \ + FLASH_FLAG_DYB_LOCKING) + { "s25fl128s0", 0x012018, 0x0300, 256 * 1024, 64, S25FLXXXS_FLAG, 80, + stfsm_s25fl_config }, + { "s25fl128s1", 0x012018, 0x0301, 64 * 1024, 256, S25FLXXXS_FLAG, 80, + stfsm_s25fl_config }, + { "s25fl256s0", 0x010219, 0x4d00, 256 * 1024, 128, + S25FLXXXS_FLAG | FLASH_FLAG_32BIT_ADDR, 80, stfsm_s25fl_config }, + { "s25fl256s1", 0x010219, 0x4d01, 64 * 1024, 512, + S25FLXXXS_FLAG | FLASH_FLAG_32BIT_ADDR, 80, stfsm_s25fl_config }, + + /* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */ +#define W25X_FLAG (FLASH_FLAG_READ_WRITE | \ + FLASH_FLAG_READ_FAST | \ + FLASH_FLAG_READ_1_1_2 | \ + FLASH_FLAG_WRITE_1_1_2) + { "w25x40", 0xef3013, 0, 64 * 1024, 8, W25X_FLAG, 75, NULL }, + { "w25x80", 0xef3014, 0, 64 * 1024, 16, W25X_FLAG, 75, NULL }, + { "w25x16", 0xef3015, 0, 64 * 1024, 32, W25X_FLAG, 75, NULL }, + { "w25x32", 0xef3016, 0, 64 * 1024, 64, W25X_FLAG, 75, NULL }, + { "w25x64", 0xef3017, 0, 64 * 1024, 128, W25X_FLAG, 75, NULL }, + + /* Winbond -- w25q "blocks" are 64K, "sectors" are 4KiB */ +#define W25Q_FLAG (FLASH_FLAG_READ_WRITE | \ + FLASH_FLAG_READ_FAST | \ + FLASH_FLAG_READ_1_1_2 | \ + FLASH_FLAG_READ_1_2_2 | \ + FLASH_FLAG_READ_1_1_4 | \ + FLASH_FLAG_READ_1_4_4 | \ + FLASH_FLAG_WRITE_1_1_4) + { "w25q80", 0xef4014, 0, 64 * 1024, 16, W25Q_FLAG, 80, + stfsm_w25q_config }, + { "w25q16", 0xef4015, 0, 64 * 1024, 32, W25Q_FLAG, 80, + stfsm_w25q_config }, + { "w25q32", 0xef4016, 0, 64 * 1024, 64, W25Q_FLAG, 80, + stfsm_w25q_config }, + { "w25q64", 0xef4017, 0, 64 * 1024, 128, W25Q_FLAG, 80, + stfsm_w25q_config }, + + /* Sentinel */ + { NULL, 0x000000, 0, 0, 0, 0, 0, NULL }, +}; + +/* + * FSM message sequence configurations: + * + * All configs are presented in order of preference + */ + +/* Default READ configurations, in order of preference */ +static struct seq_rw_config default_read_configs[] = { + {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ_1_4_4, 0, 4, 4, 0x00, 2, 4}, + {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ_1_1_4, 0, 1, 4, 0x00, 4, 0}, + {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ_1_2_2, 0, 2, 2, 0x00, 4, 0}, + {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ_1_1_2, 0, 1, 2, 0x00, 0, 8}, + {FLASH_FLAG_READ_FAST, SPINOR_OP_READ_FAST, 0, 1, 1, 0x00, 0, 8}, + {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ, 0, 1, 1, 0x00, 0, 0}, + {0x00, 0, 0, 0, 0, 0x00, 0, 0}, +}; + +/* Default WRITE configurations */ +static struct seq_rw_config default_write_configs[] = { + {FLASH_FLAG_WRITE_1_4_4, SPINOR_OP_WRITE_1_4_4, 1, 4, 4, 0x00, 0, 0}, + {FLASH_FLAG_WRITE_1_1_4, SPINOR_OP_WRITE_1_1_4, 1, 1, 4, 0x00, 0, 0}, + {FLASH_FLAG_WRITE_1_2_2, SPINOR_OP_WRITE_1_2_2, 1, 2, 2, 0x00, 0, 0}, + {FLASH_FLAG_WRITE_1_1_2, SPINOR_OP_WRITE_1_1_2, 1, 1, 2, 0x00, 0, 0}, + {FLASH_FLAG_READ_WRITE, SPINOR_OP_WRITE, 1, 1, 1, 0x00, 0, 0}, + {0x00, 0, 0, 0, 0, 0x00, 0, 0}, +}; + +/* + * [N25Qxxx] Configuration + */ +#define N25Q_VCR_DUMMY_CYCLES(x) (((x) & 0xf) << 4) +#define N25Q_VCR_XIP_DISABLED ((uint8_t)0x1 << 3) +#define N25Q_VCR_WRAP_CONT 0x3 + +/* N25Q 3-byte Address READ configurations + * - 'FAST' variants configured for 8 dummy cycles. + * + * Note, the number of dummy cycles used for 'FAST' READ operations is + * configurable and would normally be tuned according to the READ command and + * operating frequency. However, this applies universally to all 'FAST' READ + * commands, including those used by the SPIBoot controller, and remains in + * force until the device is power-cycled. Since the SPIBoot controller is + * hard-wired to use 8 dummy cycles, we must configure the device to also use 8 + * cycles. + */ +static struct seq_rw_config n25q_read3_configs[] = { + {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ_1_4_4, 0, 4, 4, 0x00, 0, 8}, + {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ_1_1_4, 0, 1, 4, 0x00, 0, 8}, + {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ_1_2_2, 0, 2, 2, 0x00, 0, 8}, + {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ_1_1_2, 0, 1, 2, 0x00, 0, 8}, + {FLASH_FLAG_READ_FAST, SPINOR_OP_READ_FAST, 0, 1, 1, 0x00, 0, 8}, + {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ, 0, 1, 1, 0x00, 0, 0}, + {0x00, 0, 0, 0, 0, 0x00, 0, 0}, +}; + +/* N25Q 4-byte Address READ configurations + * - use special 4-byte address READ commands (reduces overheads, and + * reduces risk of hitting watchdog reset issues). + * - 'FAST' variants configured for 8 dummy cycles (see note above.) + */ +static struct seq_rw_config n25q_read4_configs[] = { + {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ4_1_4_4, 0, 4, 4, 0x00, 0, 8}, + {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ4_1_1_4, 0, 1, 4, 0x00, 0, 8}, + {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ4_1_2_2, 0, 2, 2, 0x00, 0, 8}, + {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ4_1_1_2, 0, 1, 2, 0x00, 0, 8}, + {FLASH_FLAG_READ_FAST, SPINOR_OP_READ4_FAST, 0, 1, 1, 0x00, 0, 8}, + {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ4, 0, 1, 1, 0x00, 0, 0}, + {0x00, 0, 0, 0, 0, 0x00, 0, 0}, +}; + +/* + * [MX25xxx] Configuration + */ +#define MX25_STATUS_QE (0x1 << 6) + +static int stfsm_mx25_en_32bit_addr_seq(struct stfsm_seq *seq) +{ + seq->seq_opc[0] = (SEQ_OPC_PADS_1 | + SEQ_OPC_CYCLES(8) | + SEQ_OPC_OPCODE(SPINOR_OP_EN4B) | + SEQ_OPC_CSDEASSERT); + + seq->seq[0] = STFSM_INST_CMD1; + seq->seq[1] = STFSM_INST_WAIT; + seq->seq[2] = STFSM_INST_STOP; + + seq->seq_cfg = (SEQ_CFG_PADS_1 | + SEQ_CFG_ERASE | + SEQ_CFG_READNOTWRITE | + SEQ_CFG_CSDEASSERT | + SEQ_CFG_STARTSEQ); + + return 0; +} + +/* + * [S25FLxxx] Configuration + */ +#define STFSM_S25FL_CONFIG_QE (0x1 << 1) + +/* + * S25FLxxxS devices provide three ways of supporting 32-bit addressing: Bank + * Register, Extended Address Modes, and a 32-bit address command set. The + * 32-bit address command set is used here, since it avoids any problems with + * entering a state that is incompatible with the SPIBoot Controller. + */ +static struct seq_rw_config stfsm_s25fl_read4_configs[] = { + {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ4_1_4_4, 0, 4, 4, 0x00, 2, 4}, + {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ4_1_1_4, 0, 1, 4, 0x00, 0, 8}, + {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ4_1_2_2, 0, 2, 2, 0x00, 4, 0}, + {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ4_1_1_2, 0, 1, 2, 0x00, 0, 8}, + {FLASH_FLAG_READ_FAST, SPINOR_OP_READ4_FAST, 0, 1, 1, 0x00, 0, 8}, + {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ4, 0, 1, 1, 0x00, 0, 0}, + {0x00, 0, 0, 0, 0, 0x00, 0, 0}, +}; + +static struct seq_rw_config stfsm_s25fl_write4_configs[] = { + {FLASH_FLAG_WRITE_1_1_4, S25FL_CMD_WRITE4_1_1_4, 1, 1, 4, 0x00, 0, 0}, + {FLASH_FLAG_READ_WRITE, S25FL_CMD_WRITE4, 1, 1, 1, 0x00, 0, 0}, + {0x00, 0, 0, 0, 0, 0x00, 0, 0}, +}; + +/* + * [W25Qxxx] Configuration + */ +#define W25Q_STATUS_QE (0x1 << 1) + +static struct stfsm_seq stfsm_seq_read_jedec = { + .data_size = TRANSFER_SIZE(8), + .seq_opc[0] = (SEQ_OPC_PADS_1 | + SEQ_OPC_CYCLES(8) | + SEQ_OPC_OPCODE(SPINOR_OP_RDID)), + .seq = { + STFSM_INST_CMD1, + STFSM_INST_DATA_READ, + STFSM_INST_STOP, + }, + .seq_cfg = (SEQ_CFG_PADS_1 | + SEQ_CFG_READNOTWRITE | + SEQ_CFG_CSDEASSERT | + SEQ_CFG_STARTSEQ), +}; + +static struct stfsm_seq stfsm_seq_read_status_fifo = { + .data_size = TRANSFER_SIZE(4), + .seq_opc[0] = (SEQ_OPC_PADS_1 | + SEQ_OPC_CYCLES(8) | + SEQ_OPC_OPCODE(SPINOR_OP_RDSR)), + .seq = { + STFSM_INST_CMD1, + STFSM_INST_DATA_READ, + STFSM_INST_STOP, + }, + .seq_cfg = (SEQ_CFG_PADS_1 | + SEQ_CFG_READNOTWRITE | + SEQ_CFG_CSDEASSERT | + SEQ_CFG_STARTSEQ), +}; + +static struct stfsm_seq stfsm_seq_erase_sector = { + /* 'addr_cfg' configured during initialisation */ + .seq_opc = { + (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | + SEQ_OPC_OPCODE(SPINOR_OP_WREN) | SEQ_OPC_CSDEASSERT), + + (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | + SEQ_OPC_OPCODE(SPINOR_OP_SE)), + }, + .seq = { + STFSM_INST_CMD1, + STFSM_INST_CMD2, + STFSM_INST_ADD1, + STFSM_INST_ADD2, + STFSM_INST_STOP, + }, + .seq_cfg = (SEQ_CFG_PADS_1 | + SEQ_CFG_READNOTWRITE | + SEQ_CFG_CSDEASSERT | + SEQ_CFG_STARTSEQ), +}; + +static struct stfsm_seq stfsm_seq_erase_chip = { + .seq_opc = { + (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | + SEQ_OPC_OPCODE(SPINOR_OP_WREN) | SEQ_OPC_CSDEASSERT), + + (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | + SEQ_OPC_OPCODE(SPINOR_OP_CHIP_ERASE) | SEQ_OPC_CSDEASSERT), + }, + .seq = { + STFSM_INST_CMD1, + STFSM_INST_CMD2, + STFSM_INST_WAIT, + STFSM_INST_STOP, + }, + .seq_cfg = (SEQ_CFG_PADS_1 | + SEQ_CFG_ERASE | + SEQ_CFG_READNOTWRITE | + SEQ_CFG_CSDEASSERT | + SEQ_CFG_STARTSEQ), +}; + +static struct stfsm_seq stfsm_seq_write_status = { + .seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | + SEQ_OPC_OPCODE(SPINOR_OP_WREN) | SEQ_OPC_CSDEASSERT), + .seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | + SEQ_OPC_OPCODE(SPINOR_OP_WRSR)), + .seq = { + STFSM_INST_CMD1, + STFSM_INST_CMD2, + STFSM_INST_STA_WR1, + STFSM_INST_STOP, + }, + .seq_cfg = (SEQ_CFG_PADS_1 | + SEQ_CFG_READNOTWRITE | + SEQ_CFG_CSDEASSERT | + SEQ_CFG_STARTSEQ), +}; + +static int stfsm_n25q_en_32bit_addr_seq(struct stfsm_seq *seq) +{ + seq->seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | + SEQ_OPC_OPCODE(SPINOR_OP_EN4B)); + seq->seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | + SEQ_OPC_OPCODE(SPINOR_OP_WREN) | + SEQ_OPC_CSDEASSERT); + + seq->seq[0] = STFSM_INST_CMD2; + seq->seq[1] = STFSM_INST_CMD1; + seq->seq[2] = STFSM_INST_WAIT; + seq->seq[3] = STFSM_INST_STOP; + + seq->seq_cfg = (SEQ_CFG_PADS_1 | + SEQ_CFG_ERASE | + SEQ_CFG_READNOTWRITE | + SEQ_CFG_CSDEASSERT | + SEQ_CFG_STARTSEQ); + + return 0; +} + +static inline int stfsm_is_idle(struct stfsm *fsm) +{ + return readl(fsm->base + SPI_FAST_SEQ_STA) & 0x10; +} + +static inline uint32_t stfsm_fifo_available(struct stfsm *fsm) +{ + return (readl(fsm->base + SPI_FAST_SEQ_STA) >> 5) & 0x7f; +} + +static void stfsm_clear_fifo(struct stfsm *fsm) +{ + uint32_t avail; + + for (;;) { + avail = stfsm_fifo_available(fsm); + if (!avail) + break; + + while (avail) { + readl(fsm->base + SPI_FAST_SEQ_DATA_REG); + avail--; + } + } +} + +static inline void stfsm_load_seq(struct stfsm *fsm, + const struct stfsm_seq *seq) +{ + void __iomem *dst = fsm->base + SPI_FAST_SEQ_TRANSFER_SIZE; + const uint32_t *src = (const uint32_t *)seq; + int words = sizeof(*seq) / sizeof(*src); + + BUG_ON(!stfsm_is_idle(fsm)); + + while (words--) { + writel(*src, dst); + src++; + dst += 4; + } +} + +static void stfsm_wait_seq(struct stfsm *fsm) +{ + unsigned long deadline; + int timeout = 0; + + deadline = jiffies + msecs_to_jiffies(STFSM_MAX_WAIT_SEQ_MS); + + while (!timeout) { + if (time_after_eq(jiffies, deadline)) + timeout = 1; + + if (stfsm_is_idle(fsm)) + return; + + cond_resched(); + } + + dev_err(fsm->dev, "timeout on sequence completion\n"); +} + +static void stfsm_read_fifo(struct stfsm *fsm, uint32_t *buf, uint32_t size) +{ + uint32_t remaining = size >> 2; + uint32_t avail; + uint32_t words; + + dev_dbg(fsm->dev, "Reading %d bytes from FIFO\n", size); + + BUG_ON((((uintptr_t)buf) & 0x3) || (size & 0x3)); + + while (remaining) { + for (;;) { + avail = stfsm_fifo_available(fsm); + if (avail) + break; + udelay(1); + } + words = min(avail, remaining); + remaining -= words; + + readsl(fsm->base + SPI_FAST_SEQ_DATA_REG, buf, words); + buf += words; + } +} + +static int stfsm_write_fifo(struct stfsm *fsm, const uint32_t *buf, + uint32_t size) +{ + uint32_t words = size >> 2; + + dev_dbg(fsm->dev, "writing %d bytes to FIFO\n", size); + + BUG_ON((((uintptr_t)buf) & 0x3) || (size & 0x3)); + + writesl(fsm->base + SPI_FAST_SEQ_DATA_REG, buf, words); + + return size; +} + +static int stfsm_enter_32bit_addr(struct stfsm *fsm, int enter) +{ + struct stfsm_seq *seq = &fsm->stfsm_seq_en_32bit_addr; + uint32_t cmd = enter ? SPINOR_OP_EN4B : SPINOR_OP_EX4B; + + seq->seq_opc[0] = (SEQ_OPC_PADS_1 | + SEQ_OPC_CYCLES(8) | + SEQ_OPC_OPCODE(cmd) | + SEQ_OPC_CSDEASSERT); + + stfsm_load_seq(fsm, seq); + + stfsm_wait_seq(fsm); + + return 0; +} + +static uint8_t stfsm_wait_busy(struct stfsm *fsm) +{ + struct stfsm_seq *seq = &stfsm_seq_read_status_fifo; + unsigned long deadline; + uint32_t status; + int timeout = 0; + + /* Use RDRS1 */ + seq->seq_opc[0] = (SEQ_OPC_PADS_1 | + SEQ_OPC_CYCLES(8) | + SEQ_OPC_OPCODE(SPINOR_OP_RDSR)); + + /* Load read_status sequence */ + stfsm_load_seq(fsm, seq); + + /* + * Repeat until busy bit is deasserted, or timeout, or error (S25FLxxxS) + */ + deadline = jiffies + FLASH_MAX_BUSY_WAIT; + while (!timeout) { + if (time_after_eq(jiffies, deadline)) + timeout = 1; + + stfsm_wait_seq(fsm); + + stfsm_read_fifo(fsm, &status, 4); + + if ((status & FLASH_STATUS_BUSY) == 0) + return 0; + + if ((fsm->configuration & CFG_S25FL_CHECK_ERROR_FLAGS) && + ((status & S25FL_STATUS_P_ERR) || + (status & S25FL_STATUS_E_ERR))) + return (uint8_t)(status & 0xff); + + if (!timeout) + /* Restart */ + writel(seq->seq_cfg, fsm->base + SPI_FAST_SEQ_CFG); + + cond_resched(); + } + + dev_err(fsm->dev, "timeout on wait_busy\n"); + + return FLASH_STATUS_TIMEOUT; +} + +static int stfsm_read_status(struct stfsm *fsm, uint8_t cmd, + uint8_t *data, int bytes) +{ + struct stfsm_seq *seq = &stfsm_seq_read_status_fifo; + uint32_t tmp; + uint8_t *t = (uint8_t *)&tmp; + int i; + + dev_dbg(fsm->dev, "read 'status' register [0x%02x], %d byte(s)\n", + cmd, bytes); + + BUG_ON(bytes != 1 && bytes != 2); + + seq->seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | + SEQ_OPC_OPCODE(cmd)), + + stfsm_load_seq(fsm, seq); + + stfsm_read_fifo(fsm, &tmp, 4); + + for (i = 0; i < bytes; i++) + data[i] = t[i]; + + stfsm_wait_seq(fsm); + + return 0; +} + +static int stfsm_write_status(struct stfsm *fsm, uint8_t cmd, + uint16_t data, int bytes, int wait_busy) +{ + struct stfsm_seq *seq = &stfsm_seq_write_status; + + dev_dbg(fsm->dev, + "write 'status' register [0x%02x], %d byte(s), 0x%04x\n" + " %s wait-busy\n", cmd, bytes, data, wait_busy ? "with" : "no"); + + BUG_ON(bytes != 1 && bytes != 2); + + seq->seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | + SEQ_OPC_OPCODE(cmd)); + + seq->status = (uint32_t)data | STA_PADS_1 | STA_CSDEASSERT; + seq->seq[2] = (bytes == 1) ? STFSM_INST_STA_WR1 : STFSM_INST_STA_WR1_2; + + stfsm_load_seq(fsm, seq); + + stfsm_wait_seq(fsm); + + if (wait_busy) + stfsm_wait_busy(fsm); + + return 0; +} + +/* + * SoC reset on 'boot-from-spi' systems + * + * Certain modes of operation cause the Flash device to enter a particular state + * for a period of time (e.g. 'Erase Sector', 'Quad Enable', and 'Enter 32-bit + * Addr' commands). On boot-from-spi systems, it is important to consider what + * happens if a warm reset occurs during this period. The SPIBoot controller + * assumes that Flash device is in its default reset state, 24-bit address mode, + * and ready to accept commands. This can be achieved using some form of + * on-board logic/controller to force a device POR in response to a SoC-level + * reset or by making use of the device reset signal if available (limited + * number of devices only). + * + * Failure to take such precautions can cause problems following a warm reset. + * For some operations (e.g. ERASE), there is little that can be done. For + * other modes of operation (e.g. 32-bit addressing), options are often + * available that can help minimise the window in which a reset could cause a + * problem. + * + */ +static bool stfsm_can_handle_soc_reset(struct stfsm *fsm) +{ + /* Reset signal is available on the board and supported by the device */ + if (fsm->reset_signal && fsm->info->flags & FLASH_FLAG_RESET) + return true; + + /* Board-level logic forces a power-on-reset */ + if (fsm->reset_por) + return true; + + /* Reset is not properly handled and may result in failure to reboot */ + return false; +} + +/* Configure 'addr_cfg' according to addressing mode */ +static void stfsm_prepare_erasesec_seq(struct stfsm *fsm, + struct stfsm_seq *seq) +{ + int addr1_cycles = fsm->info->flags & FLASH_FLAG_32BIT_ADDR ? 16 : 8; + + seq->addr_cfg = (ADR_CFG_CYCLES_ADD1(addr1_cycles) | + ADR_CFG_PADS_1_ADD1 | + ADR_CFG_CYCLES_ADD2(16) | + ADR_CFG_PADS_1_ADD2 | + ADR_CFG_CSDEASSERT_ADD2); +} + +/* Search for preferred configuration based on available flags */ +static struct seq_rw_config * +stfsm_search_seq_rw_configs(struct stfsm *fsm, + struct seq_rw_config cfgs[]) +{ + struct seq_rw_config *config; + int flags = fsm->info->flags; + + for (config = cfgs; config->cmd != 0; config++) + if ((config->flags & flags) == config->flags) + return config; + + return NULL; +} + +/* Prepare a READ/WRITE sequence according to configuration parameters */ +static void stfsm_prepare_rw_seq(struct stfsm *fsm, + struct stfsm_seq *seq, + struct seq_rw_config *cfg) +{ + int addr1_cycles, addr2_cycles; + int i = 0; + + memset(seq, 0, sizeof(*seq)); + + /* Add READ/WRITE OPC */ + seq->seq_opc[i++] = (SEQ_OPC_PADS_1 | + SEQ_OPC_CYCLES(8) | + SEQ_OPC_OPCODE(cfg->cmd)); + + /* Add WREN OPC for a WRITE sequence */ + if (cfg->write) + seq->seq_opc[i++] = (SEQ_OPC_PADS_1 | + SEQ_OPC_CYCLES(8) | + SEQ_OPC_OPCODE(SPINOR_OP_WREN) | + SEQ_OPC_CSDEASSERT); + + /* Address configuration (24 or 32-bit addresses) */ + addr1_cycles = (fsm->info->flags & FLASH_FLAG_32BIT_ADDR) ? 16 : 8; + addr1_cycles /= cfg->addr_pads; + addr2_cycles = 16 / cfg->addr_pads; + seq->addr_cfg = ((addr1_cycles & 0x3f) << 0 | /* ADD1 cycles */ + (cfg->addr_pads - 1) << 6 | /* ADD1 pads */ + (addr2_cycles & 0x3f) << 16 | /* ADD2 cycles */ + ((cfg->addr_pads - 1) << 22)); /* ADD2 pads */ + + /* Data/Sequence configuration */ + seq->seq_cfg = ((cfg->data_pads - 1) << 16 | + SEQ_CFG_STARTSEQ | + SEQ_CFG_CSDEASSERT); + if (!cfg->write) + seq->seq_cfg |= SEQ_CFG_READNOTWRITE; + + /* Mode configuration (no. of pads taken from addr cfg) */ + seq->mode = ((cfg->mode_data & 0xff) << 0 | /* data */ + (cfg->mode_cycles & 0x3f) << 16 | /* cycles */ + (cfg->addr_pads - 1) << 22); /* pads */ + + /* Dummy configuration (no. of pads taken from addr cfg) */ + seq->dummy = ((cfg->dummy_cycles & 0x3f) << 16 | /* cycles */ + (cfg->addr_pads - 1) << 22); /* pads */ + + + /* Instruction sequence */ + i = 0; + if (cfg->write) + seq->seq[i++] = STFSM_INST_CMD2; + + seq->seq[i++] = STFSM_INST_CMD1; + + seq->seq[i++] = STFSM_INST_ADD1; + seq->seq[i++] = STFSM_INST_ADD2; + + if (cfg->mode_cycles) + seq->seq[i++] = STFSM_INST_MODE; + + if (cfg->dummy_cycles) + seq->seq[i++] = STFSM_INST_DUMMY; + + seq->seq[i++] = + cfg->write ? STFSM_INST_DATA_WRITE : STFSM_INST_DATA_READ; + seq->seq[i++] = STFSM_INST_STOP; +} + +static int stfsm_search_prepare_rw_seq(struct stfsm *fsm, + struct stfsm_seq *seq, + struct seq_rw_config *cfgs) +{ + struct seq_rw_config *config; + + config = stfsm_search_seq_rw_configs(fsm, cfgs); + if (!config) { + dev_err(fsm->dev, "failed to find suitable config\n"); + return -EINVAL; + } + + stfsm_prepare_rw_seq(fsm, seq, config); + + return 0; +} + +/* Prepare a READ/WRITE/ERASE 'default' sequences */ +static int stfsm_prepare_rwe_seqs_default(struct stfsm *fsm) +{ + uint32_t flags = fsm->info->flags; + int ret; + + /* Configure 'READ' sequence */ + ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_read, + default_read_configs); + if (ret) { + dev_err(fsm->dev, + "failed to prep READ sequence with flags [0x%08x]\n", + flags); + return ret; + } + + /* Configure 'WRITE' sequence */ + ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_write, + default_write_configs); + if (ret) { + dev_err(fsm->dev, + "failed to prep WRITE sequence with flags [0x%08x]\n", + flags); + return ret; + } + + /* Configure 'ERASE_SECTOR' sequence */ + stfsm_prepare_erasesec_seq(fsm, &stfsm_seq_erase_sector); + + return 0; +} + +static int stfsm_mx25_config(struct stfsm *fsm) +{ + uint32_t flags = fsm->info->flags; + uint32_t data_pads; + uint8_t sta; + int ret; + bool soc_reset; + + /* + * Use default READ/WRITE sequences + */ + ret = stfsm_prepare_rwe_seqs_default(fsm); + if (ret) + return ret; + + /* + * Configure 32-bit Address Support + */ + if (flags & FLASH_FLAG_32BIT_ADDR) { + /* Configure 'enter_32bitaddr' FSM sequence */ + stfsm_mx25_en_32bit_addr_seq(&fsm->stfsm_seq_en_32bit_addr); + + soc_reset = stfsm_can_handle_soc_reset(fsm); + if (soc_reset || !fsm->booted_from_spi) + /* If we can handle SoC resets, we enable 32-bit address + * mode pervasively */ + stfsm_enter_32bit_addr(fsm, 1); + + else + /* Else, enable/disable 32-bit addressing before/after + * each operation */ + fsm->configuration = (CFG_READ_TOGGLE_32BIT_ADDR | + CFG_WRITE_TOGGLE_32BIT_ADDR | + CFG_ERASESEC_TOGGLE_32BIT_ADDR); + } + + /* Check status of 'QE' bit, update if required. */ + stfsm_read_status(fsm, SPINOR_OP_RDSR, &sta, 1); + data_pads = ((fsm->stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1; + if (data_pads == 4) { + if (!(sta & MX25_STATUS_QE)) { + /* Set 'QE' */ + sta |= MX25_STATUS_QE; + + stfsm_write_status(fsm, SPINOR_OP_WRSR, sta, 1, 1); + } + } else { + if (sta & MX25_STATUS_QE) { + /* Clear 'QE' */ + sta &= ~MX25_STATUS_QE; + + stfsm_write_status(fsm, SPINOR_OP_WRSR, sta, 1, 1); + } + } + + return 0; +} + +static int stfsm_n25q_config(struct stfsm *fsm) +{ + uint32_t flags = fsm->info->flags; + uint8_t vcr; + int ret = 0; + bool soc_reset; + + /* Configure 'READ' sequence */ + if (flags & FLASH_FLAG_32BIT_ADDR) + ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_read, + n25q_read4_configs); + else + ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_read, + n25q_read3_configs); + if (ret) { + dev_err(fsm->dev, + "failed to prepare READ sequence with flags [0x%08x]\n", + flags); + return ret; + } + + /* Configure 'WRITE' sequence (default configs) */ + ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_write, + default_write_configs); + if (ret) { + dev_err(fsm->dev, + "preparing WRITE sequence using flags [0x%08x] failed\n", + flags); + return ret; + } + + /* * Configure 'ERASE_SECTOR' sequence */ + stfsm_prepare_erasesec_seq(fsm, &stfsm_seq_erase_sector); + + /* Configure 32-bit address support */ + if (flags & FLASH_FLAG_32BIT_ADDR) { + stfsm_n25q_en_32bit_addr_seq(&fsm->stfsm_seq_en_32bit_addr); + + soc_reset = stfsm_can_handle_soc_reset(fsm); + if (soc_reset || !fsm->booted_from_spi) { + /* + * If we can handle SoC resets, we enable 32-bit + * address mode pervasively + */ + stfsm_enter_32bit_addr(fsm, 1); + } else { + /* + * If not, enable/disable for WRITE and ERASE + * operations (READ uses special commands) + */ + fsm->configuration = (CFG_WRITE_TOGGLE_32BIT_ADDR | + CFG_ERASESEC_TOGGLE_32BIT_ADDR); + } + } + + /* + * Configure device to use 8 dummy cycles + */ + vcr = (N25Q_VCR_DUMMY_CYCLES(8) | N25Q_VCR_XIP_DISABLED | + N25Q_VCR_WRAP_CONT); + stfsm_write_status(fsm, N25Q_CMD_WRVCR, vcr, 1, 0); + + return 0; +} + +static void stfsm_s25fl_prepare_erasesec_seq_32(struct stfsm_seq *seq) +{ + seq->seq_opc[1] = (SEQ_OPC_PADS_1 | + SEQ_OPC_CYCLES(8) | + SEQ_OPC_OPCODE(S25FL_CMD_SE4)); + + seq->addr_cfg = (ADR_CFG_CYCLES_ADD1(16) | + ADR_CFG_PADS_1_ADD1 | + ADR_CFG_CYCLES_ADD2(16) | + ADR_CFG_PADS_1_ADD2 | + ADR_CFG_CSDEASSERT_ADD2); +} + +static void stfsm_s25fl_read_dyb(struct stfsm *fsm, uint32_t offs, uint8_t *dby) +{ + uint32_t tmp; + struct stfsm_seq seq = { + .data_size = TRANSFER_SIZE(4), + .seq_opc[0] = (SEQ_OPC_PADS_1 | + SEQ_OPC_CYCLES(8) | + SEQ_OPC_OPCODE(S25FL_CMD_DYBRD)), + .addr_cfg = (ADR_CFG_CYCLES_ADD1(16) | + ADR_CFG_PADS_1_ADD1 | + ADR_CFG_CYCLES_ADD2(16) | + ADR_CFG_PADS_1_ADD2), + .addr1 = (offs >> 16) & 0xffff, + .addr2 = offs & 0xffff, + .seq = { + STFSM_INST_CMD1, + STFSM_INST_ADD1, + STFSM_INST_ADD2, + STFSM_INST_DATA_READ, + STFSM_INST_STOP, + }, + .seq_cfg = (SEQ_CFG_PADS_1 | + SEQ_CFG_READNOTWRITE | + SEQ_CFG_CSDEASSERT | + SEQ_CFG_STARTSEQ), + }; + + stfsm_load_seq(fsm, &seq); + + stfsm_read_fifo(fsm, &tmp, 4); + + *dby = (uint8_t)(tmp >> 24); + + stfsm_wait_seq(fsm); +} + +static void stfsm_s25fl_write_dyb(struct stfsm *fsm, uint32_t offs, uint8_t dby) +{ + struct stfsm_seq seq = { + .seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | + SEQ_OPC_OPCODE(SPINOR_OP_WREN) | + SEQ_OPC_CSDEASSERT), + .seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | + SEQ_OPC_OPCODE(S25FL_CMD_DYBWR)), + .addr_cfg = (ADR_CFG_CYCLES_ADD1(16) | + ADR_CFG_PADS_1_ADD1 | + ADR_CFG_CYCLES_ADD2(16) | + ADR_CFG_PADS_1_ADD2), + .status = (uint32_t)dby | STA_PADS_1 | STA_CSDEASSERT, + .addr1 = (offs >> 16) & 0xffff, + .addr2 = offs & 0xffff, + .seq = { + STFSM_INST_CMD1, + STFSM_INST_CMD2, + STFSM_INST_ADD1, + STFSM_INST_ADD2, + STFSM_INST_STA_WR1, + STFSM_INST_STOP, + }, + .seq_cfg = (SEQ_CFG_PADS_1 | + SEQ_CFG_READNOTWRITE | + SEQ_CFG_CSDEASSERT | + SEQ_CFG_STARTSEQ), + }; + + stfsm_load_seq(fsm, &seq); + stfsm_wait_seq(fsm); + + stfsm_wait_busy(fsm); +} + +static int stfsm_s25fl_clear_status_reg(struct stfsm *fsm) +{ + struct stfsm_seq seq = { + .seq_opc[0] = (SEQ_OPC_PADS_1 | + SEQ_OPC_CYCLES(8) | + SEQ_OPC_OPCODE(S25FL_CMD_CLSR) | + SEQ_OPC_CSDEASSERT), + .seq_opc[1] = (SEQ_OPC_PADS_1 | + SEQ_OPC_CYCLES(8) | + SEQ_OPC_OPCODE(SPINOR_OP_WRDI) | + SEQ_OPC_CSDEASSERT), + .seq = { + STFSM_INST_CMD1, + STFSM_INST_CMD2, + STFSM_INST_WAIT, + STFSM_INST_STOP, + }, + .seq_cfg = (SEQ_CFG_PADS_1 | + SEQ_CFG_ERASE | + SEQ_CFG_READNOTWRITE | + SEQ_CFG_CSDEASSERT | + SEQ_CFG_STARTSEQ), + }; + + stfsm_load_seq(fsm, &seq); + + stfsm_wait_seq(fsm); + + return 0; +} + +static int stfsm_s25fl_config(struct stfsm *fsm) +{ + struct flash_info *info = fsm->info; + uint32_t flags = info->flags; + uint32_t data_pads; + uint32_t offs; + uint16_t sta_wr; + uint8_t sr1, cr1, dyb; + int update_sr = 0; + int ret; + + if (flags & FLASH_FLAG_32BIT_ADDR) { + /* + * Prepare Read/Write/Erase sequences according to S25FLxxx + * 32-bit address command set + */ + ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_read, + stfsm_s25fl_read4_configs); + if (ret) + return ret; + + ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_write, + stfsm_s25fl_write4_configs); + if (ret) + return ret; + + stfsm_s25fl_prepare_erasesec_seq_32(&stfsm_seq_erase_sector); + + } else { + /* Use default configurations for 24-bit addressing */ + ret = stfsm_prepare_rwe_seqs_default(fsm); + if (ret) + return ret; + } + + /* + * For devices that support 'DYB' sector locking, check lock status and + * unlock sectors if necessary (some variants power-on with sectors + * locked by default) + */ + if (flags & FLASH_FLAG_DYB_LOCKING) { + offs = 0; + for (offs = 0; offs < info->sector_size * info->n_sectors;) { + stfsm_s25fl_read_dyb(fsm, offs, &dyb); + if (dyb == 0x00) + stfsm_s25fl_write_dyb(fsm, offs, 0xff); + + /* Handle bottom/top 4KiB parameter sectors */ + if ((offs < info->sector_size * 2) || + (offs >= (info->sector_size - info->n_sectors * 4))) + offs += 0x1000; + else + offs += 0x10000; + } + } + + /* Check status of 'QE' bit, update if required. */ + stfsm_read_status(fsm, SPINOR_OP_RDSR2, &cr1, 1); + data_pads = ((fsm->stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1; + if (data_pads == 4) { + if (!(cr1 & STFSM_S25FL_CONFIG_QE)) { + /* Set 'QE' */ + cr1 |= STFSM_S25FL_CONFIG_QE; + + update_sr = 1; + } + } else { + if (cr1 & STFSM_S25FL_CONFIG_QE) { + /* Clear 'QE' */ + cr1 &= ~STFSM_S25FL_CONFIG_QE; + + update_sr = 1; + } + } + if (update_sr) { + stfsm_read_status(fsm, SPINOR_OP_RDSR, &sr1, 1); + sta_wr = ((uint16_t)cr1 << 8) | sr1; + stfsm_write_status(fsm, SPINOR_OP_WRSR, sta_wr, 2, 1); + } + + /* + * S25FLxxx devices support Program and Error error flags. + * Configure driver to check flags and clear if necessary. + */ + fsm->configuration |= CFG_S25FL_CHECK_ERROR_FLAGS; + + return 0; +} + +static int stfsm_w25q_config(struct stfsm *fsm) +{ + uint32_t data_pads; + uint8_t sr1, sr2; + uint16_t sr_wr; + int update_sr = 0; + int ret; + + ret = stfsm_prepare_rwe_seqs_default(fsm); + if (ret) + return ret; + + /* Check status of 'QE' bit, update if required. */ + stfsm_read_status(fsm, SPINOR_OP_RDSR2, &sr2, 1); + data_pads = ((fsm->stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1; + if (data_pads == 4) { + if (!(sr2 & W25Q_STATUS_QE)) { + /* Set 'QE' */ + sr2 |= W25Q_STATUS_QE; + update_sr = 1; + } + } else { + if (sr2 & W25Q_STATUS_QE) { + /* Clear 'QE' */ + sr2 &= ~W25Q_STATUS_QE; + update_sr = 1; + } + } + if (update_sr) { + /* Write status register */ + stfsm_read_status(fsm, SPINOR_OP_RDSR, &sr1, 1); + sr_wr = ((uint16_t)sr2 << 8) | sr1; + stfsm_write_status(fsm, SPINOR_OP_WRSR, sr_wr, 2, 1); + } + + return 0; +} + +static int stfsm_read(struct stfsm *fsm, uint8_t *buf, uint32_t size, + uint32_t offset) +{ + struct stfsm_seq *seq = &fsm->stfsm_seq_read; + uint32_t data_pads; + uint32_t read_mask; + uint32_t size_ub; + uint32_t size_lb; + uint32_t size_mop; + uint32_t tmp[4]; + uint32_t page_buf[FLASH_PAGESIZE_32]; + uint8_t *p; + + dev_dbg(fsm->dev, "reading %d bytes from 0x%08x\n", size, offset); + + /* Enter 32-bit address mode, if required */ + if (fsm->configuration & CFG_READ_TOGGLE_32BIT_ADDR) + stfsm_enter_32bit_addr(fsm, 1); + + /* Must read in multiples of 32 cycles (or 32*pads/8 Bytes) */ + data_pads = ((seq->seq_cfg >> 16) & 0x3) + 1; + read_mask = (data_pads << 2) - 1; + + /* Handle non-aligned buf */ + p = ((uintptr_t)buf & 0x3) ? (uint8_t *)page_buf : buf; + + /* Handle non-aligned size */ + size_ub = (size + read_mask) & ~read_mask; + size_lb = size & ~read_mask; + size_mop = size & read_mask; + + seq->data_size = TRANSFER_SIZE(size_ub); + seq->addr1 = (offset >> 16) & 0xffff; + seq->addr2 = offset & 0xffff; + + stfsm_load_seq(fsm, seq); + + if (size_lb) + stfsm_read_fifo(fsm, (uint32_t *)p, size_lb); + + if (size_mop) { + stfsm_read_fifo(fsm, tmp, read_mask + 1); + memcpy(p + size_lb, &tmp, size_mop); + } + + /* Handle non-aligned buf */ + if ((uintptr_t)buf & 0x3) + memcpy(buf, page_buf, size); + + /* Wait for sequence to finish */ + stfsm_wait_seq(fsm); + + stfsm_clear_fifo(fsm); + + /* Exit 32-bit address mode, if required */ + if (fsm->configuration & CFG_READ_TOGGLE_32BIT_ADDR) + stfsm_enter_32bit_addr(fsm, 0); + + return 0; +} + +static int stfsm_write(struct stfsm *fsm, const uint8_t *buf, + uint32_t size, uint32_t offset) +{ + struct stfsm_seq *seq = &fsm->stfsm_seq_write; + uint32_t data_pads; + uint32_t write_mask; + uint32_t size_ub; + uint32_t size_lb; + uint32_t size_mop; + uint32_t tmp[4]; + uint32_t page_buf[FLASH_PAGESIZE_32]; + uint8_t *t = (uint8_t *)&tmp; + const uint8_t *p; + int ret; + int i; + + dev_dbg(fsm->dev, "writing %d bytes to 0x%08x\n", size, offset); + + /* Enter 32-bit address mode, if required */ + if (fsm->configuration & CFG_WRITE_TOGGLE_32BIT_ADDR) + stfsm_enter_32bit_addr(fsm, 1); + + /* Must write in multiples of 32 cycles (or 32*pads/8 bytes) */ + data_pads = ((seq->seq_cfg >> 16) & 0x3) + 1; + write_mask = (data_pads << 2) - 1; + + /* Handle non-aligned buf */ + if ((uintptr_t)buf & 0x3) { + memcpy(page_buf, buf, size); + p = (uint8_t *)page_buf; + } else { + p = buf; + } + + /* Handle non-aligned size */ + size_ub = (size + write_mask) & ~write_mask; + size_lb = size & ~write_mask; + size_mop = size & write_mask; + + seq->data_size = TRANSFER_SIZE(size_ub); + seq->addr1 = (offset >> 16) & 0xffff; + seq->addr2 = offset & 0xffff; + + /* Need to set FIFO to write mode, before writing data to FIFO (see + * GNBvb79594) + */ + writel(0x00040000, fsm->base + SPI_FAST_SEQ_CFG); + + /* + * Before writing data to the FIFO, apply a small delay to allow a + * potential change of FIFO direction to complete. + */ + if (fsm->fifo_dir_delay == 0) + readl(fsm->base + SPI_FAST_SEQ_CFG); + else + udelay(fsm->fifo_dir_delay); + + + /* Write data to FIFO, before starting sequence (see GNBvd79593) */ + if (size_lb) { + stfsm_write_fifo(fsm, (uint32_t *)p, size_lb); + p += size_lb; + } + + /* Handle non-aligned size */ + if (size_mop) { + memset(t, 0xff, write_mask + 1); /* fill with 0xff's */ + for (i = 0; i < size_mop; i++) + t[i] = *p++; + + stfsm_write_fifo(fsm, tmp, write_mask + 1); + } + + /* Start sequence */ + stfsm_load_seq(fsm, seq); + + /* Wait for sequence to finish */ + stfsm_wait_seq(fsm); + + /* Wait for completion */ + ret = stfsm_wait_busy(fsm); + if (ret && fsm->configuration & CFG_S25FL_CHECK_ERROR_FLAGS) + stfsm_s25fl_clear_status_reg(fsm); + + /* Exit 32-bit address mode, if required */ + if (fsm->configuration & CFG_WRITE_TOGGLE_32BIT_ADDR) + stfsm_enter_32bit_addr(fsm, 0); + + return 0; +} + +/* + * Read an address range from the flash chip. The address range + * may be any size provided it is within the physical boundaries. + */ +static int stfsm_mtd_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) +{ + struct stfsm *fsm = dev_get_drvdata(mtd->dev.parent); + uint32_t bytes; + + dev_dbg(fsm->dev, "%s from 0x%08x, len %zd\n", + __func__, (u32)from, len); + + mutex_lock(&fsm->lock); + + while (len > 0) { + bytes = min_t(size_t, len, FLASH_PAGESIZE); + + stfsm_read(fsm, buf, bytes, from); + + buf += bytes; + from += bytes; + len -= bytes; + + *retlen += bytes; + } + + mutex_unlock(&fsm->lock); + + return 0; +} + +static int stfsm_erase_sector(struct stfsm *fsm, uint32_t offset) +{ + struct stfsm_seq *seq = &stfsm_seq_erase_sector; + int ret; + + dev_dbg(fsm->dev, "erasing sector at 0x%08x\n", offset); + + /* Enter 32-bit address mode, if required */ + if (fsm->configuration & CFG_ERASESEC_TOGGLE_32BIT_ADDR) + stfsm_enter_32bit_addr(fsm, 1); + + seq->addr1 = (offset >> 16) & 0xffff; + seq->addr2 = offset & 0xffff; + + stfsm_load_seq(fsm, seq); + + stfsm_wait_seq(fsm); + + /* Wait for completion */ + ret = stfsm_wait_busy(fsm); + if (ret && fsm->configuration & CFG_S25FL_CHECK_ERROR_FLAGS) + stfsm_s25fl_clear_status_reg(fsm); + + /* Exit 32-bit address mode, if required */ + if (fsm->configuration & CFG_ERASESEC_TOGGLE_32BIT_ADDR) + stfsm_enter_32bit_addr(fsm, 0); + + return ret; +} + +static int stfsm_erase_chip(struct stfsm *fsm) +{ + const struct stfsm_seq *seq = &stfsm_seq_erase_chip; + + dev_dbg(fsm->dev, "erasing chip\n"); + + stfsm_load_seq(fsm, seq); + + stfsm_wait_seq(fsm); + + return stfsm_wait_busy(fsm); +} + +/* + * Write an address range to the flash chip. Data must be written in + * FLASH_PAGESIZE chunks. The address range may be any size provided + * it is within the physical boundaries. + */ +static int stfsm_mtd_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) +{ + struct stfsm *fsm = dev_get_drvdata(mtd->dev.parent); + + u32 page_offs; + u32 bytes; + uint8_t *b = (uint8_t *)buf; + int ret = 0; + + dev_dbg(fsm->dev, "%s to 0x%08x, len %zd\n", __func__, (u32)to, len); + + /* Offset within page */ + page_offs = to % FLASH_PAGESIZE; + + mutex_lock(&fsm->lock); + + while (len) { + /* Write up to page boundary */ + bytes = min_t(size_t, FLASH_PAGESIZE - page_offs, len); + + ret = stfsm_write(fsm, b, bytes, to); + if (ret) + goto out1; + + b += bytes; + len -= bytes; + to += bytes; + + /* We are now page-aligned */ + page_offs = 0; + + *retlen += bytes; + + } + +out1: + mutex_unlock(&fsm->lock); + + return ret; +} + +/* + * Erase an address range on the flash chip. The address range may extend + * one or more erase sectors. Return an error is there is a problem erasing. + */ +static int stfsm_mtd_erase(struct mtd_info *mtd, struct erase_info *instr) +{ + struct stfsm *fsm = dev_get_drvdata(mtd->dev.parent); + u32 addr, len; + int ret; + + dev_dbg(fsm->dev, "%s at 0x%llx, len %lld\n", __func__, + (long long)instr->addr, (long long)instr->len); + + addr = instr->addr; + len = instr->len; + + mutex_lock(&fsm->lock); + + /* Whole-chip erase? */ + if (len == mtd->size) { + ret = stfsm_erase_chip(fsm); + if (ret) + goto out1; + } else { + while (len) { + ret = stfsm_erase_sector(fsm, addr); + if (ret) + goto out1; + + addr += mtd->erasesize; + len -= mtd->erasesize; + } + } + + mutex_unlock(&fsm->lock); + + instr->state = MTD_ERASE_DONE; + mtd_erase_callback(instr); + + return 0; + +out1: + instr->state = MTD_ERASE_FAILED; + mutex_unlock(&fsm->lock); + + return ret; +} + +static void stfsm_read_jedec(struct stfsm *fsm, uint8_t *jedec) +{ + const struct stfsm_seq *seq = &stfsm_seq_read_jedec; + uint32_t tmp[2]; + + stfsm_load_seq(fsm, seq); + + stfsm_read_fifo(fsm, tmp, 8); + + memcpy(jedec, tmp, 5); + + stfsm_wait_seq(fsm); +} + +static struct flash_info *stfsm_jedec_probe(struct stfsm *fsm) +{ + struct flash_info *info; + u16 ext_jedec; + u32 jedec; + u8 id[5]; + + stfsm_read_jedec(fsm, id); + + jedec = id[0] << 16 | id[1] << 8 | id[2]; + /* + * JEDEC also defines an optional "extended device information" + * string for after vendor-specific data, after the three bytes + * we use here. Supporting some chips might require using it. + */ + ext_jedec = id[3] << 8 | id[4]; + + dev_dbg(fsm->dev, "JEDEC = 0x%08x [%02x %02x %02x %02x %02x]\n", + jedec, id[0], id[1], id[2], id[3], id[4]); + + for (info = flash_types; info->name; info++) { + if (info->jedec_id == jedec) { + if (info->ext_id && info->ext_id != ext_jedec) + continue; + return info; + } + } + dev_err(fsm->dev, "Unrecognized JEDEC id %06x\n", jedec); + + return NULL; +} + +static int stfsm_set_mode(struct stfsm *fsm, uint32_t mode) +{ + int ret, timeout = 10; + + /* Wait for controller to accept mode change */ + while (--timeout) { + ret = readl(fsm->base + SPI_STA_MODE_CHANGE); + if (ret & 0x1) + break; + udelay(1); + } + + if (!timeout) + return -EBUSY; + + writel(mode, fsm->base + SPI_MODESELECT); + + return 0; +} + +static void stfsm_set_freq(struct stfsm *fsm, uint32_t spi_freq) +{ + uint32_t emi_freq; + uint32_t clk_div; + + /* TODO: Make this dynamic */ + emi_freq = STFSM_DEFAULT_EMI_FREQ; + + /* + * Calculate clk_div - values between 2 and 128 + * Multiple of 2, rounded up + */ + clk_div = 2 * DIV_ROUND_UP(emi_freq, 2 * spi_freq); + if (clk_div < 2) + clk_div = 2; + else if (clk_div > 128) + clk_div = 128; + + /* + * Determine a suitable delay for the IP to complete a change of + * direction of the FIFO. The required delay is related to the clock + * divider used. The following heuristics are based on empirical tests, + * using a 100MHz EMI clock. + */ + if (clk_div <= 4) + fsm->fifo_dir_delay = 0; + else if (clk_div <= 10) + fsm->fifo_dir_delay = 1; + else + fsm->fifo_dir_delay = DIV_ROUND_UP(clk_div, 10); + + dev_dbg(fsm->dev, "emi_clk = %uHZ, spi_freq = %uHZ, clk_div = %u\n", + emi_freq, spi_freq, clk_div); + + writel(clk_div, fsm->base + SPI_CLOCKDIV); +} + +static int stfsm_init(struct stfsm *fsm) +{ + int ret; + + /* Perform a soft reset of the FSM controller */ + writel(SEQ_CFG_SWRESET, fsm->base + SPI_FAST_SEQ_CFG); + udelay(1); + writel(0, fsm->base + SPI_FAST_SEQ_CFG); + + /* Set clock to 'safe' frequency initially */ + stfsm_set_freq(fsm, STFSM_FLASH_SAFE_FREQ); + + /* Switch to FSM */ + ret = stfsm_set_mode(fsm, SPI_MODESELECT_FSM); + if (ret) + return ret; + + /* Set timing parameters */ + writel(SPI_CFG_DEVICE_ST | + SPI_CFG_DEFAULT_MIN_CS_HIGH | + SPI_CFG_DEFAULT_CS_SETUPHOLD | + SPI_CFG_DEFAULT_DATA_HOLD, + fsm->base + SPI_CONFIGDATA); + writel(STFSM_DEFAULT_WR_TIME, fsm->base + SPI_STATUS_WR_TIME_REG); + + /* + * Set the FSM 'WAIT' delay to the minimum workable value. Note, for + * our purposes, the WAIT instruction is used purely to achieve + * "sequence validity" rather than actually implement a delay. + */ + writel(0x00000001, fsm->base + SPI_PROGRAM_ERASE_TIME); + + /* Clear FIFO, just in case */ + stfsm_clear_fifo(fsm); + + return 0; +} + +static void stfsm_fetch_platform_configs(struct platform_device *pdev) +{ + struct stfsm *fsm = platform_get_drvdata(pdev); + struct device_node *np = pdev->dev.of_node; + struct regmap *regmap; + uint32_t boot_device_reg; + uint32_t boot_device_spi; + uint32_t boot_device; /* Value we read from *boot_device_reg */ + int ret; + + /* Booting from SPI NOR Flash is the default */ + fsm->booted_from_spi = true; + + regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg"); + if (IS_ERR(regmap)) + goto boot_device_fail; + + fsm->reset_signal = of_property_read_bool(np, "st,reset-signal"); + + fsm->reset_por = of_property_read_bool(np, "st,reset-por"); + + /* Where in the syscon the boot device information lives */ + ret = of_property_read_u32(np, "st,boot-device-reg", &boot_device_reg); + if (ret) + goto boot_device_fail; + + /* Boot device value when booted from SPI NOR */ + ret = of_property_read_u32(np, "st,boot-device-spi", &boot_device_spi); + if (ret) + goto boot_device_fail; + + ret = regmap_read(regmap, boot_device_reg, &boot_device); + if (ret) + goto boot_device_fail; + + if (boot_device != boot_device_spi) + fsm->booted_from_spi = false; + + return; + +boot_device_fail: + dev_warn(&pdev->dev, + "failed to fetch boot device, assuming boot from SPI\n"); +} + +static int stfsm_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct mtd_part_parser_data ppdata; + struct flash_info *info; + struct resource *res; + struct stfsm *fsm; + int ret; + + if (!np) { + dev_err(&pdev->dev, "No DT found\n"); + return -EINVAL; + } + ppdata.of_node = np; + + fsm = devm_kzalloc(&pdev->dev, sizeof(*fsm), GFP_KERNEL); + if (!fsm) + return -ENOMEM; + + fsm->dev = &pdev->dev; + + platform_set_drvdata(pdev, fsm); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Resource not found\n"); + return -ENODEV; + } + + fsm->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(fsm->base)) { + dev_err(&pdev->dev, + "Failed to reserve memory region %pR\n", res); + return PTR_ERR(fsm->base); + } + + mutex_init(&fsm->lock); + + ret = stfsm_init(fsm); + if (ret) { + dev_err(&pdev->dev, "Failed to initialise FSM Controller\n"); + return ret; + } + + stfsm_fetch_platform_configs(pdev); + + /* Detect SPI FLASH device */ + info = stfsm_jedec_probe(fsm); + if (!info) + return -ENODEV; + fsm->info = info; + + /* Use device size to determine address width */ + if (info->sector_size * info->n_sectors > 0x1000000) + info->flags |= FLASH_FLAG_32BIT_ADDR; + + /* + * Configure READ/WRITE/ERASE sequences according to platform and + * device flags. + */ + if (info->config) { + ret = info->config(fsm); + if (ret) + return ret; + } else { + ret = stfsm_prepare_rwe_seqs_default(fsm); + if (ret) + return ret; + } + + fsm->mtd.name = info->name; + fsm->mtd.dev.parent = &pdev->dev; + fsm->mtd.type = MTD_NORFLASH; + fsm->mtd.writesize = 4; + fsm->mtd.writebufsize = fsm->mtd.writesize; + fsm->mtd.flags = MTD_CAP_NORFLASH; + fsm->mtd.size = info->sector_size * info->n_sectors; + fsm->mtd.erasesize = info->sector_size; + + fsm->mtd._read = stfsm_mtd_read; + fsm->mtd._write = stfsm_mtd_write; + fsm->mtd._erase = stfsm_mtd_erase; + + dev_info(&pdev->dev, + "Found serial flash device: %s\n" + " size = %llx (%lldMiB) erasesize = 0x%08x (%uKiB)\n", + info->name, + (long long)fsm->mtd.size, (long long)(fsm->mtd.size >> 20), + fsm->mtd.erasesize, (fsm->mtd.erasesize >> 10)); + + return mtd_device_parse_register(&fsm->mtd, NULL, &ppdata, NULL, 0); +} + +static int stfsm_remove(struct platform_device *pdev) +{ + struct stfsm *fsm = platform_get_drvdata(pdev); + + return mtd_device_unregister(&fsm->mtd); +} + +static const struct of_device_id stfsm_match[] = { + { .compatible = "st,spi-fsm", }, + {}, +}; +MODULE_DEVICE_TABLE(of, stfsm_match); + +static struct platform_driver stfsm_driver = { + .probe = stfsm_probe, + .remove = stfsm_remove, + .driver = { + .name = "st-spi-fsm", + .owner = THIS_MODULE, + .of_match_table = stfsm_match, + }, +}; +module_platform_driver(stfsm_driver); + +MODULE_AUTHOR("Angus Clark <angus.clark@st.com>"); +MODULE_DESCRIPTION("ST SPI FSM driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c index 3af35148409..b66b541877f 100644 --- a/drivers/mtd/inftlcore.c +++ b/drivers/mtd/inftlcore.c @@ -50,7 +50,7 @@ static void inftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd) struct INFTLrecord *inftl; unsigned long temp; - if (mtd->type != MTD_NANDFLASH || mtd->size > UINT_MAX) + if (!mtd_type_is_nand(mtd) || mtd->size > UINT_MAX) return; /* OK, this is moderately ugly. But probably safe. Alternatives? */ if (memcmp(mtd->name, "DiskOnChip", 10)) diff --git a/drivers/mtd/inftlmount.c b/drivers/mtd/inftlmount.c index 4adc0374fb6..487e64f411a 100644 --- a/drivers/mtd/inftlmount.c +++ b/drivers/mtd/inftlmount.c @@ -30,7 +30,6 @@ #include <asm/uaccess.h> #include <linux/delay.h> #include <linux/slab.h> -#include <linux/init.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nftl.h> #include <linux/mtd/inftl.h> diff --git a/drivers/mtd/lpddr/Kconfig b/drivers/mtd/lpddr/Kconfig index 265f969817e..3a19cbee24d 100644 --- a/drivers/mtd/lpddr/Kconfig +++ b/drivers/mtd/lpddr/Kconfig @@ -1,5 +1,5 @@ -menu "LPDDR flash memory drivers" - depends on MTD!=n +menu "LPDDR & LPDDR2 PCM memory drivers" + depends on MTD config MTD_LPDDR tristate "Support for LPDDR flash chips" @@ -17,4 +17,13 @@ config MTD_QINFO_PROBE Window QINFO interface, permits software to be used for entire families of devices. This serves similar purpose of CFI on legacy Flash products + +config MTD_LPDDR2_NVM + # ARM dependency is only for writel_relaxed() + depends on MTD && ARM + tristate "Support for LPDDR2-NVM flash chips" + help + This option enables support of PCM memories with a LPDDR2-NVM + (Low power double data rate 2) interface. + endmenu diff --git a/drivers/mtd/lpddr/Makefile b/drivers/mtd/lpddr/Makefile index da48e46b581..881d440d483 100644 --- a/drivers/mtd/lpddr/Makefile +++ b/drivers/mtd/lpddr/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_MTD_QINFO_PROBE) += qinfo_probe.o obj-$(CONFIG_MTD_LPDDR) += lpddr_cmds.o +obj-$(CONFIG_MTD_LPDDR2_NVM) += lpddr2_nvm.o diff --git a/drivers/mtd/lpddr/lpddr2_nvm.c b/drivers/mtd/lpddr/lpddr2_nvm.c new file mode 100644 index 00000000000..063cec40d0a --- /dev/null +++ b/drivers/mtd/lpddr/lpddr2_nvm.c @@ -0,0 +1,507 @@ +/* + * LPDDR2-NVM MTD driver. This module provides read, write, erase, lock/unlock + * support for LPDDR2-NVM PCM memories + * + * Copyright © 2012 Micron Technology, Inc. + * + * Vincenzo Aliberti <vincenzo.aliberti@gmail.com> + * Domenico Manna <domenico.manna@gmail.com> + * Many thanks to Andrea Vigilante for initial enabling + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": %s: " fmt, __func__ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/mtd/map.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/ioport.h> +#include <linux/err.h> + +/* Parameters */ +#define ERASE_BLOCKSIZE (0x00020000/2) /* in Word */ +#define WRITE_BUFFSIZE (0x00000400/2) /* in Word */ +#define OW_BASE_ADDRESS 0x00000000 /* OW offset */ +#define BUS_WIDTH 0x00000020 /* x32 devices */ + +/* PFOW symbols address offset */ +#define PFOW_QUERY_STRING_P (0x0000/2) /* in Word */ +#define PFOW_QUERY_STRING_F (0x0002/2) /* in Word */ +#define PFOW_QUERY_STRING_O (0x0004/2) /* in Word */ +#define PFOW_QUERY_STRING_W (0x0006/2) /* in Word */ + +/* OW registers address */ +#define CMD_CODE_OFS (0x0080/2) /* in Word */ +#define CMD_DATA_OFS (0x0084/2) /* in Word */ +#define CMD_ADD_L_OFS (0x0088/2) /* in Word */ +#define CMD_ADD_H_OFS (0x008A/2) /* in Word */ +#define MPR_L_OFS (0x0090/2) /* in Word */ +#define MPR_H_OFS (0x0092/2) /* in Word */ +#define CMD_EXEC_OFS (0x00C0/2) /* in Word */ +#define STATUS_REG_OFS (0x00CC/2) /* in Word */ +#define PRG_BUFFER_OFS (0x0010/2) /* in Word */ + +/* Datamask */ +#define MR_CFGMASK 0x8000 +#define SR_OK_DATAMASK 0x0080 + +/* LPDDR2-NVM Commands */ +#define LPDDR2_NVM_LOCK 0x0061 +#define LPDDR2_NVM_UNLOCK 0x0062 +#define LPDDR2_NVM_SW_PROGRAM 0x0041 +#define LPDDR2_NVM_SW_OVERWRITE 0x0042 +#define LPDDR2_NVM_BUF_PROGRAM 0x00E9 +#define LPDDR2_NVM_BUF_OVERWRITE 0x00EA +#define LPDDR2_NVM_ERASE 0x0020 + +/* LPDDR2-NVM Registers offset */ +#define LPDDR2_MODE_REG_DATA 0x0040 +#define LPDDR2_MODE_REG_CFG 0x0050 + +/* + * Internal Type Definitions + * pcm_int_data contains memory controller details: + * @reg_data : LPDDR2_MODE_REG_DATA register address after remapping + * @reg_cfg : LPDDR2_MODE_REG_CFG register address after remapping + * &bus_width: memory bus-width (eg: x16 2 Bytes, x32 4 Bytes) + */ +struct pcm_int_data { + void __iomem *ctl_regs; + int bus_width; +}; + +static DEFINE_MUTEX(lpdd2_nvm_mutex); + +/* + * Build a map_word starting from an u_long + */ +static inline map_word build_map_word(u_long myword) +{ + map_word val = { {0} }; + val.x[0] = myword; + return val; +} + +/* + * Build Mode Register Configuration DataMask based on device bus-width + */ +static inline u_int build_mr_cfgmask(u_int bus_width) +{ + u_int val = MR_CFGMASK; + + if (bus_width == 0x0004) /* x32 device */ + val = val << 16; + + return val; +} + +/* + * Build Status Register OK DataMask based on device bus-width + */ +static inline u_int build_sr_ok_datamask(u_int bus_width) +{ + u_int val = SR_OK_DATAMASK; + + if (bus_width == 0x0004) /* x32 device */ + val = (val << 16)+val; + + return val; +} + +/* + * Evaluates Overlay Window Control Registers address + */ +static inline u_long ow_reg_add(struct map_info *map, u_long offset) +{ + u_long val = 0; + struct pcm_int_data *pcm_data = map->fldrv_priv; + + val = map->pfow_base + offset*pcm_data->bus_width; + + return val; +} + +/* + * Enable lpddr2-nvm Overlay Window + * Overlay Window is a memory mapped area containing all LPDDR2-NVM registers + * used by device commands as well as uservisible resources like Device Status + * Register, Device ID, etc + */ +static inline void ow_enable(struct map_info *map) +{ + struct pcm_int_data *pcm_data = map->fldrv_priv; + + writel_relaxed(build_mr_cfgmask(pcm_data->bus_width) | 0x18, + pcm_data->ctl_regs + LPDDR2_MODE_REG_CFG); + writel_relaxed(0x01, pcm_data->ctl_regs + LPDDR2_MODE_REG_DATA); +} + +/* + * Disable lpddr2-nvm Overlay Window + * Overlay Window is a memory mapped area containing all LPDDR2-NVM registers + * used by device commands as well as uservisible resources like Device Status + * Register, Device ID, etc + */ +static inline void ow_disable(struct map_info *map) +{ + struct pcm_int_data *pcm_data = map->fldrv_priv; + + writel_relaxed(build_mr_cfgmask(pcm_data->bus_width) | 0x18, + pcm_data->ctl_regs + LPDDR2_MODE_REG_CFG); + writel_relaxed(0x02, pcm_data->ctl_regs + LPDDR2_MODE_REG_DATA); +} + +/* + * Execute lpddr2-nvm operations + */ +static int lpddr2_nvm_do_op(struct map_info *map, u_long cmd_code, + u_long cmd_data, u_long cmd_add, u_long cmd_mpr, u_char *buf) +{ + map_word add_l = { {0} }, add_h = { {0} }, mpr_l = { {0} }, + mpr_h = { {0} }, data_l = { {0} }, cmd = { {0} }, + exec_cmd = { {0} }, sr; + map_word data_h = { {0} }; /* only for 2x x16 devices stacked */ + u_long i, status_reg, prg_buff_ofs; + struct pcm_int_data *pcm_data = map->fldrv_priv; + u_int sr_ok_datamask = build_sr_ok_datamask(pcm_data->bus_width); + + /* Builds low and high words for OW Control Registers */ + add_l.x[0] = cmd_add & 0x0000FFFF; + add_h.x[0] = (cmd_add >> 16) & 0x0000FFFF; + mpr_l.x[0] = cmd_mpr & 0x0000FFFF; + mpr_h.x[0] = (cmd_mpr >> 16) & 0x0000FFFF; + cmd.x[0] = cmd_code & 0x0000FFFF; + exec_cmd.x[0] = 0x0001; + data_l.x[0] = cmd_data & 0x0000FFFF; + data_h.x[0] = (cmd_data >> 16) & 0x0000FFFF; /* only for 2x x16 */ + + /* Set Overlay Window Control Registers */ + map_write(map, cmd, ow_reg_add(map, CMD_CODE_OFS)); + map_write(map, data_l, ow_reg_add(map, CMD_DATA_OFS)); + map_write(map, add_l, ow_reg_add(map, CMD_ADD_L_OFS)); + map_write(map, add_h, ow_reg_add(map, CMD_ADD_H_OFS)); + map_write(map, mpr_l, ow_reg_add(map, MPR_L_OFS)); + map_write(map, mpr_h, ow_reg_add(map, MPR_H_OFS)); + if (pcm_data->bus_width == 0x0004) { /* 2x16 devices stacked */ + map_write(map, cmd, ow_reg_add(map, CMD_CODE_OFS) + 2); + map_write(map, data_h, ow_reg_add(map, CMD_DATA_OFS) + 2); + map_write(map, add_l, ow_reg_add(map, CMD_ADD_L_OFS) + 2); + map_write(map, add_h, ow_reg_add(map, CMD_ADD_H_OFS) + 2); + map_write(map, mpr_l, ow_reg_add(map, MPR_L_OFS) + 2); + map_write(map, mpr_h, ow_reg_add(map, MPR_H_OFS) + 2); + } + + /* Fill Program Buffer */ + if ((cmd_code == LPDDR2_NVM_BUF_PROGRAM) || + (cmd_code == LPDDR2_NVM_BUF_OVERWRITE)) { + prg_buff_ofs = (map_read(map, + ow_reg_add(map, PRG_BUFFER_OFS))).x[0]; + for (i = 0; i < cmd_mpr; i++) { + map_write(map, build_map_word(buf[i]), map->pfow_base + + prg_buff_ofs + i); + } + } + + /* Command Execute */ + map_write(map, exec_cmd, ow_reg_add(map, CMD_EXEC_OFS)); + if (pcm_data->bus_width == 0x0004) /* 2x16 devices stacked */ + map_write(map, exec_cmd, ow_reg_add(map, CMD_EXEC_OFS) + 2); + + /* Status Register Check */ + do { + sr = map_read(map, ow_reg_add(map, STATUS_REG_OFS)); + status_reg = sr.x[0]; + if (pcm_data->bus_width == 0x0004) {/* 2x16 devices stacked */ + sr = map_read(map, ow_reg_add(map, + STATUS_REG_OFS) + 2); + status_reg += sr.x[0] << 16; + } + } while ((status_reg & sr_ok_datamask) != sr_ok_datamask); + + return (((status_reg & sr_ok_datamask) == sr_ok_datamask) ? 0 : -EIO); +} + +/* + * Execute lpddr2-nvm operations @ block level + */ +static int lpddr2_nvm_do_block_op(struct mtd_info *mtd, loff_t start_add, + uint64_t len, u_char block_op) +{ + struct map_info *map = mtd->priv; + u_long add, end_add; + int ret = 0; + + mutex_lock(&lpdd2_nvm_mutex); + + ow_enable(map); + + add = start_add; + end_add = add + len; + + do { + ret = lpddr2_nvm_do_op(map, block_op, 0x00, add, add, NULL); + if (ret) + goto out; + add += mtd->erasesize; + } while (add < end_add); + +out: + ow_disable(map); + mutex_unlock(&lpdd2_nvm_mutex); + return ret; +} + +/* + * verify presence of PFOW string + */ +static int lpddr2_nvm_pfow_present(struct map_info *map) +{ + map_word pfow_val[4]; + unsigned int found = 1; + + mutex_lock(&lpdd2_nvm_mutex); + + ow_enable(map); + + /* Load string from array */ + pfow_val[0] = map_read(map, ow_reg_add(map, PFOW_QUERY_STRING_P)); + pfow_val[1] = map_read(map, ow_reg_add(map, PFOW_QUERY_STRING_F)); + pfow_val[2] = map_read(map, ow_reg_add(map, PFOW_QUERY_STRING_O)); + pfow_val[3] = map_read(map, ow_reg_add(map, PFOW_QUERY_STRING_W)); + + /* Verify the string loaded vs expected */ + if (!map_word_equal(map, build_map_word('P'), pfow_val[0])) + found = 0; + if (!map_word_equal(map, build_map_word('F'), pfow_val[1])) + found = 0; + if (!map_word_equal(map, build_map_word('O'), pfow_val[2])) + found = 0; + if (!map_word_equal(map, build_map_word('W'), pfow_val[3])) + found = 0; + + ow_disable(map); + + mutex_unlock(&lpdd2_nvm_mutex); + + return found; +} + +/* + * lpddr2_nvm driver read method + */ +static int lpddr2_nvm_read(struct mtd_info *mtd, loff_t start_add, + size_t len, size_t *retlen, u_char *buf) +{ + struct map_info *map = mtd->priv; + + mutex_lock(&lpdd2_nvm_mutex); + + *retlen = len; + + map_copy_from(map, buf, start_add, *retlen); + + mutex_unlock(&lpdd2_nvm_mutex); + return 0; +} + +/* + * lpddr2_nvm driver write method + */ +static int lpddr2_nvm_write(struct mtd_info *mtd, loff_t start_add, + size_t len, size_t *retlen, const u_char *buf) +{ + struct map_info *map = mtd->priv; + struct pcm_int_data *pcm_data = map->fldrv_priv; + u_long add, current_len, tot_len, target_len, my_data; + u_char *write_buf = (u_char *)buf; + int ret = 0; + + mutex_lock(&lpdd2_nvm_mutex); + + ow_enable(map); + + /* Set start value for the variables */ + add = start_add; + target_len = len; + tot_len = 0; + + while (tot_len < target_len) { + if (!(IS_ALIGNED(add, mtd->writesize))) { /* do sw program */ + my_data = write_buf[tot_len]; + my_data += (write_buf[tot_len+1]) << 8; + if (pcm_data->bus_width == 0x0004) {/* 2x16 devices */ + my_data += (write_buf[tot_len+2]) << 16; + my_data += (write_buf[tot_len+3]) << 24; + } + ret = lpddr2_nvm_do_op(map, LPDDR2_NVM_SW_OVERWRITE, + my_data, add, 0x00, NULL); + if (ret) + goto out; + + add += pcm_data->bus_width; + tot_len += pcm_data->bus_width; + } else { /* do buffer program */ + current_len = min(target_len - tot_len, + (u_long) mtd->writesize); + ret = lpddr2_nvm_do_op(map, LPDDR2_NVM_BUF_OVERWRITE, + 0x00, add, current_len, write_buf + tot_len); + if (ret) + goto out; + + add += current_len; + tot_len += current_len; + } + } + +out: + *retlen = tot_len; + ow_disable(map); + mutex_unlock(&lpdd2_nvm_mutex); + return ret; +} + +/* + * lpddr2_nvm driver erase method + */ +static int lpddr2_nvm_erase(struct mtd_info *mtd, struct erase_info *instr) +{ + int ret = lpddr2_nvm_do_block_op(mtd, instr->addr, instr->len, + LPDDR2_NVM_ERASE); + if (!ret) { + instr->state = MTD_ERASE_DONE; + mtd_erase_callback(instr); + } + + return ret; +} + +/* + * lpddr2_nvm driver unlock method + */ +static int lpddr2_nvm_unlock(struct mtd_info *mtd, loff_t start_add, + uint64_t len) +{ + return lpddr2_nvm_do_block_op(mtd, start_add, len, LPDDR2_NVM_UNLOCK); +} + +/* + * lpddr2_nvm driver lock method + */ +static int lpddr2_nvm_lock(struct mtd_info *mtd, loff_t start_add, + uint64_t len) +{ + return lpddr2_nvm_do_block_op(mtd, start_add, len, LPDDR2_NVM_LOCK); +} + +/* + * lpddr2_nvm driver probe method + */ +static int lpddr2_nvm_probe(struct platform_device *pdev) +{ + struct map_info *map; + struct mtd_info *mtd; + struct resource *add_range; + struct resource *control_regs; + struct pcm_int_data *pcm_data; + + /* Allocate memory control_regs data structures */ + pcm_data = devm_kzalloc(&pdev->dev, sizeof(*pcm_data), GFP_KERNEL); + if (!pcm_data) + return -ENOMEM; + + pcm_data->bus_width = BUS_WIDTH; + + /* Allocate memory for map_info & mtd_info data structures */ + map = devm_kzalloc(&pdev->dev, sizeof(*map), GFP_KERNEL); + if (!map) + return -ENOMEM; + + mtd = devm_kzalloc(&pdev->dev, sizeof(*mtd), GFP_KERNEL); + if (!mtd) + return -ENOMEM; + + /* lpddr2_nvm address range */ + add_range = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + /* Populate map_info data structure */ + *map = (struct map_info) { + .virt = devm_ioremap_resource(&pdev->dev, add_range), + .name = pdev->dev.init_name, + .phys = add_range->start, + .size = resource_size(add_range), + .bankwidth = pcm_data->bus_width / 2, + .pfow_base = OW_BASE_ADDRESS, + .fldrv_priv = pcm_data, + }; + if (IS_ERR(map->virt)) + return PTR_ERR(map->virt); + + simple_map_init(map); /* fill with default methods */ + + control_regs = platform_get_resource(pdev, IORESOURCE_MEM, 1); + pcm_data->ctl_regs = devm_ioremap_resource(&pdev->dev, control_regs); + if (IS_ERR(pcm_data->ctl_regs)) + return PTR_ERR(pcm_data->ctl_regs); + + /* Populate mtd_info data structure */ + *mtd = (struct mtd_info) { + .name = pdev->dev.init_name, + .type = MTD_RAM, + .priv = map, + .size = resource_size(add_range), + .erasesize = ERASE_BLOCKSIZE * pcm_data->bus_width, + .writesize = 1, + .writebufsize = WRITE_BUFFSIZE * pcm_data->bus_width, + .flags = (MTD_CAP_NVRAM | MTD_POWERUP_LOCK), + ._read = lpddr2_nvm_read, + ._write = lpddr2_nvm_write, + ._erase = lpddr2_nvm_erase, + ._unlock = lpddr2_nvm_unlock, + ._lock = lpddr2_nvm_lock, + }; + + /* Verify the presence of the device looking for PFOW string */ + if (!lpddr2_nvm_pfow_present(map)) { + pr_err("device not recognized\n"); + return -EINVAL; + } + /* Parse partitions and register the MTD device */ + return mtd_device_parse_register(mtd, NULL, NULL, NULL, 0); +} + +/* + * lpddr2_nvm driver remove method + */ +static int lpddr2_nvm_remove(struct platform_device *pdev) +{ + return mtd_device_unregister(dev_get_drvdata(&pdev->dev)); +} + +/* Initialize platform_driver data structure for lpddr2_nvm */ +static struct platform_driver lpddr2_nvm_drv = { + .driver = { + .name = "lpddr2_nvm", + }, + .probe = lpddr2_nvm_probe, + .remove = lpddr2_nvm_remove, +}; + +module_platform_driver(lpddr2_nvm_drv); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Vincenzo Aliberti <vincenzo.aliberti@gmail.com>"); +MODULE_DESCRIPTION("MTD driver for LPDDR2-NVM PCM memories"); diff --git a/drivers/mtd/lpddr/lpddr_cmds.c b/drivers/mtd/lpddr/lpddr_cmds.c index d3cfe26beea..018c75faadb 100644 --- a/drivers/mtd/lpddr/lpddr_cmds.c +++ b/drivers/mtd/lpddr/lpddr_cmds.c @@ -55,10 +55,8 @@ struct mtd_info *lpddr_cmdset(struct map_info *map) int i, j; mtd = kzalloc(sizeof(*mtd), GFP_KERNEL); - if (!mtd) { - printk(KERN_ERR "Failed to allocate memory for MTD device\n"); + if (!mtd) return NULL; - } mtd->priv = map; mtd->type = MTD_NORFLASH; @@ -388,7 +386,7 @@ static void put_chip(struct map_info *map, struct flchip *chip) wake_up(&chip->wq); } -int do_write_buffer(struct map_info *map, struct flchip *chip, +static int do_write_buffer(struct map_info *map, struct flchip *chip, unsigned long adr, const struct kvec **pvec, unsigned long *pvec_seek, int len) { @@ -469,7 +467,7 @@ int do_write_buffer(struct map_info *map, struct flchip *chip, return ret; } -int do_erase_oneblock(struct mtd_info *mtd, loff_t adr) +static int do_erase_oneblock(struct mtd_info *mtd, loff_t adr) { struct map_info *map = mtd->priv; struct lpddr_private *lpddr = map->fldrv_priv; @@ -703,7 +701,7 @@ static int lpddr_erase(struct mtd_info *mtd, struct erase_info *instr) #define DO_XXLOCK_LOCK 1 #define DO_XXLOCK_UNLOCK 2 -int do_xxlock(struct mtd_info *mtd, loff_t adr, uint32_t len, int thunk) +static int do_xxlock(struct mtd_info *mtd, loff_t adr, uint32_t len, int thunk) { int ret = 0; struct map_info *map = mtd->priv; @@ -748,34 +746,6 @@ static int lpddr_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) return do_xxlock(mtd, ofs, len, DO_XXLOCK_UNLOCK); } -int word_program(struct map_info *map, loff_t adr, uint32_t curval) -{ - int ret; - struct lpddr_private *lpddr = map->fldrv_priv; - int chipnum = adr >> lpddr->chipshift; - struct flchip *chip = &lpddr->chips[chipnum]; - - mutex_lock(&chip->mutex); - ret = get_chip(map, chip, FL_WRITING); - if (ret) { - mutex_unlock(&chip->mutex); - return ret; - } - - send_pfow_command(map, LPDDR_WORD_PROGRAM, adr, 0x00, (map_word *)&curval); - - ret = wait_for_ready(map, chip, (1<<lpddr->qinfo->SingleWordProgTime)); - if (ret) { - printk(KERN_WARNING"%s word_program error at: %llx; val: %x\n", - map->name, adr, curval); - goto out; - } - -out: put_chip(map, chip); - mutex_unlock(&chip->mutex); - return ret; -} - MODULE_LICENSE("GPL"); MODULE_AUTHOR("Alexey Korolev <akorolev@infradead.org>"); MODULE_DESCRIPTION("MTD driver for LPDDR flash chips"); diff --git a/drivers/mtd/lpddr/qinfo_probe.c b/drivers/mtd/lpddr/qinfo_probe.c index 45abed67f1e..69f2112340b 100644 --- a/drivers/mtd/lpddr/qinfo_probe.c +++ b/drivers/mtd/lpddr/qinfo_probe.c @@ -135,11 +135,8 @@ static int lpddr_chip_setup(struct map_info *map, struct lpddr_private *lpddr) { lpddr->qinfo = kzalloc(sizeof(struct qinfo_chip), GFP_KERNEL); - if (!lpddr->qinfo) { - printk(KERN_WARNING "%s: no memory for LPDDR qinfo structure\n", - map->name); + if (!lpddr->qinfo) return 0; - } /* Get the ManuID */ lpddr->ManufactId = CMDVAL(map_read(map, map->pfow_base + PFOW_MANUFACTURER_ID)); diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 310dc7c9342..21b2874a303 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -66,11 +66,11 @@ config MTD_PHYSMAP_BANKWIDTH used internally by the CFI drivers. config MTD_PHYSMAP_OF - tristate "Flash device in physical memory map based on OF description" - depends on OF && (MTD_CFI || MTD_JEDECPROBE || MTD_ROM) + tristate "Memory device in physical memory map based on OF description" + depends on OF && (MTD_CFI || MTD_JEDECPROBE || MTD_ROM || MTD_RAM) help - This provides a 'mapping' driver which allows the NOR Flash and - ROM driver code to communicate with chips which are mapped + This provides a 'mapping' driver which allows the NOR Flash, ROM + and RAM driver code to communicate with chips which are mapped physically into the CPU's memory. The mapping description here is taken from OF device tree. @@ -108,7 +108,7 @@ config MTD_SUN_UFLASH config MTD_SC520CDP tristate "CFI Flash device mapped on AMD SC520 CDP" - depends on X86 && MTD_CFI + depends on (MELAN || COMPILE_TEST) && MTD_CFI help The SC520 CDP board has two banks of CFI-compliant chips and one Dual-in-line JEDEC chip. This 'mapping' driver supports that @@ -116,7 +116,7 @@ config MTD_SC520CDP config MTD_NETSC520 tristate "CFI Flash device mapped on AMD NetSc520" - depends on X86 && MTD_CFI + depends on (MELAN || COMPILE_TEST) && MTD_CFI help This enables access routines for the flash chips on the AMD NetSc520 demonstration board. If you have one of these boards and would like @@ -124,7 +124,7 @@ config MTD_NETSC520 config MTD_TS5500 tristate "JEDEC Flash device mapped on Technologic Systems TS-5500" - depends on X86 + depends on TS5500 || COMPILE_TEST select MTD_JEDECPROBE select MTD_CFI_AMDSTD help diff --git a/drivers/mtd/maps/bfin-async-flash.c b/drivers/mtd/maps/bfin-async-flash.c index 5434d8ded01..6ea51e54904 100644 --- a/drivers/mtd/maps/bfin-async-flash.c +++ b/drivers/mtd/maps/bfin-async-flash.c @@ -14,7 +14,6 @@ * Licensed under the GPL-2 or later. */ -#include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/mtd/mtd.h> diff --git a/drivers/mtd/maps/gpio-addr-flash.c b/drivers/mtd/maps/gpio-addr-flash.c index 1adba86474a..a4c477b9fdd 100644 --- a/drivers/mtd/maps/gpio-addr-flash.c +++ b/drivers/mtd/maps/gpio-addr-flash.c @@ -14,7 +14,6 @@ */ #include <linux/gpio.h> -#include <linux/init.h> #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> diff --git a/drivers/mtd/maps/intel_vr_nor.c b/drivers/mtd/maps/intel_vr_nor.c index f581ac1cf02..5ab71f0e1bc 100644 --- a/drivers/mtd/maps/intel_vr_nor.c +++ b/drivers/mtd/maps/intel_vr_nor.c @@ -31,7 +31,6 @@ #include <linux/kernel.h> #include <linux/slab.h> #include <linux/pci.h> -#include <linux/init.h> #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> #include <linux/mtd/partitions.h> @@ -180,7 +179,6 @@ static void vr_nor_pci_remove(struct pci_dev *dev) { struct vr_nor_mtd *p = pci_get_drvdata(dev); - pci_set_drvdata(dev, NULL); vr_nor_destroy_partitions(p); vr_nor_destroy_mtd_setup(p); vr_nor_destroy_maps(p); diff --git a/drivers/mtd/maps/ixp4xx.c b/drivers/mtd/maps/ixp4xx.c index 10debfea81e..6a589f1e288 100644 --- a/drivers/mtd/maps/ixp4xx.c +++ b/drivers/mtd/maps/ixp4xx.c @@ -13,9 +13,9 @@ * */ +#include <linux/err.h> #include <linux/module.h> #include <linux/types.h> -#include <linux/init.h> #include <linux/kernel.h> #include <linux/string.h> #include <linux/slab.h> @@ -162,13 +162,6 @@ static int ixp4xx_flash_remove(struct platform_device *dev) mtd_device_unregister(info->mtd); map_destroy(info->mtd); } - if (info->map.virt) - iounmap(info->map.virt); - - if (info->res) { - release_resource(info->res); - kfree(info->res); - } if (plat->exit) plat->exit(); @@ -194,7 +187,8 @@ static int ixp4xx_flash_probe(struct platform_device *dev) return err; } - info = kzalloc(sizeof(struct ixp4xx_flash_info), GFP_KERNEL); + info = devm_kzalloc(&dev->dev, sizeof(struct ixp4xx_flash_info), + GFP_KERNEL); if(!info) { err = -ENOMEM; goto Error; @@ -220,20 +214,9 @@ static int ixp4xx_flash_probe(struct platform_device *dev) info->map.write = ixp4xx_probe_write16; info->map.copy_from = ixp4xx_copy_from; - info->res = request_mem_region(dev->resource->start, - resource_size(dev->resource), - "IXP4XXFlash"); - if (!info->res) { - printk(KERN_ERR "IXP4XXFlash: Could not reserve memory region\n"); - err = -ENOMEM; - goto Error; - } - - info->map.virt = ioremap(dev->resource->start, - resource_size(dev->resource)); - if (!info->map.virt) { - printk(KERN_ERR "IXP4XXFlash: Failed to ioremap region\n"); - err = -EIO; + info->map.virt = devm_ioremap_resource(&dev->dev, dev->resource); + if (IS_ERR(info->map.virt)) { + err = PTR_ERR(info->map.virt); goto Error; } diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c index d7ac65d1d56..7aa682cd4d7 100644 --- a/drivers/mtd/maps/lantiq-flash.c +++ b/drivers/mtd/maps/lantiq-flash.c @@ -13,7 +13,6 @@ #include <linux/kernel.h> #include <linux/io.h> #include <linux/slab.h> -#include <linux/init.h> #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> #include <linux/mtd/partitions.h> @@ -123,24 +122,28 @@ ltq_mtd_probe(struct platform_device *pdev) return -ENODEV; } - ltq_mtd = kzalloc(sizeof(struct ltq_mtd), GFP_KERNEL); + ltq_mtd = devm_kzalloc(&pdev->dev, sizeof(struct ltq_mtd), GFP_KERNEL); + if (!ltq_mtd) + return -ENOMEM; + platform_set_drvdata(pdev, ltq_mtd); ltq_mtd->res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!ltq_mtd->res) { dev_err(&pdev->dev, "failed to get memory resource\n"); - err = -ENOENT; - goto err_out; + return -ENOENT; } - ltq_mtd->map = kzalloc(sizeof(struct map_info), GFP_KERNEL); + ltq_mtd->map = devm_kzalloc(&pdev->dev, sizeof(struct map_info), + GFP_KERNEL); + if (!ltq_mtd->map) + return -ENOMEM; + ltq_mtd->map->phys = ltq_mtd->res->start; ltq_mtd->map->size = resource_size(ltq_mtd->res); ltq_mtd->map->virt = devm_ioremap_resource(&pdev->dev, ltq_mtd->res); - if (IS_ERR(ltq_mtd->map->virt)) { - err = PTR_ERR(ltq_mtd->map->virt); - goto err_out; - } + if (IS_ERR(ltq_mtd->map->virt)) + return PTR_ERR(ltq_mtd->map->virt); ltq_mtd->map->name = ltq_map_name; ltq_mtd->map->bankwidth = 2; @@ -155,8 +158,7 @@ ltq_mtd_probe(struct platform_device *pdev) if (!ltq_mtd->mtd) { dev_err(&pdev->dev, "probing failed\n"); - err = -ENXIO; - goto err_free; + return -ENXIO; } ltq_mtd->mtd->owner = THIS_MODULE; @@ -177,10 +179,6 @@ ltq_mtd_probe(struct platform_device *pdev) err_destroy: map_destroy(ltq_mtd->mtd); -err_free: - kfree(ltq_mtd->map); -err_out: - kfree(ltq_mtd); return err; } @@ -189,13 +187,9 @@ ltq_mtd_remove(struct platform_device *pdev) { struct ltq_mtd *ltq_mtd = platform_get_drvdata(pdev); - if (ltq_mtd) { - if (ltq_mtd->mtd) { - mtd_device_unregister(ltq_mtd->mtd); - map_destroy(ltq_mtd->mtd); - } - kfree(ltq_mtd->map); - kfree(ltq_mtd); + if (ltq_mtd && ltq_mtd->mtd) { + mtd_device_unregister(ltq_mtd->mtd); + map_destroy(ltq_mtd->mtd); } return 0; } diff --git a/drivers/mtd/maps/latch-addr-flash.c b/drivers/mtd/maps/latch-addr-flash.c index 98bb5d5375d..cadfbe05187 100644 --- a/drivers/mtd/maps/latch-addr-flash.c +++ b/drivers/mtd/maps/latch-addr-flash.c @@ -10,7 +10,6 @@ * kind, whether express or implied. */ -#include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/mtd/mtd.h> diff --git a/drivers/mtd/maps/pci.c b/drivers/mtd/maps/pci.c index c2604f8b2a5..eb0242e0b2d 100644 --- a/drivers/mtd/maps/pci.c +++ b/drivers/mtd/maps/pci.c @@ -14,7 +14,6 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/pci.h> -#include <linux/init.h> #include <linux/slab.h> #include <linux/mtd/mtd.h> @@ -316,7 +315,6 @@ static void mtd_pci_remove(struct pci_dev *dev) map->exit(dev, map); kfree(map); - pci_set_drvdata(dev, NULL); pci_release_regions(dev); } diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c index d11109762ac..217c25d7381 100644 --- a/drivers/mtd/maps/physmap_of.c +++ b/drivers/mtd/maps/physmap_of.c @@ -15,7 +15,6 @@ #include <linux/module.h> #include <linux/types.h> -#include <linux/init.h> #include <linux/device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c index 676271659b3..d597e89f269 100644 --- a/drivers/mtd/maps/plat-ram.c +++ b/drivers/mtd/maps/plat-ram.c @@ -23,7 +23,6 @@ #include <linux/module.h> #include <linux/types.h> -#include <linux/init.h> #include <linux/kernel.h> #include <linux/string.h> #include <linux/ioport.h> @@ -55,7 +54,7 @@ struct platram_info { static inline struct platram_info *to_platram_info(struct platform_device *dev) { - return (struct platram_info *)platform_get_drvdata(dev); + return platform_get_drvdata(dev); } /* platram_setrw @@ -138,7 +137,6 @@ static int platram_probe(struct platform_device *pdev) info = kzalloc(sizeof(*info), GFP_KERNEL); if (info == NULL) { - dev_err(&pdev->dev, "no memory for flash info\n"); err = -ENOMEM; goto exit_error; } @@ -257,21 +255,7 @@ static struct platform_driver platram_driver = { }, }; -/* module init/exit */ - -static int __init platram_init(void) -{ - printk("Generic platform RAM MTD, (c) 2004 Simtec Electronics\n"); - return platform_driver_register(&platram_driver); -} - -static void __exit platram_exit(void) -{ - platform_driver_unregister(&platram_driver); -} - -module_init(platram_init); -module_exit(platram_exit); +module_platform_driver(platram_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c index d210d131fef..cb4d92eea9f 100644 --- a/drivers/mtd/maps/pxa2xx-flash.c +++ b/drivers/mtd/maps/pxa2xx-flash.c @@ -13,7 +13,6 @@ #include <linux/types.h> #include <linux/slab.h> #include <linux/kernel.h> -#include <linux/init.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> @@ -61,7 +60,7 @@ static int pxa2xx_flash_probe(struct platform_device *pdev) if (!info) return -ENOMEM; - info->map.name = (char *) flash->name; + info->map.name = flash->name; info->map.bankwidth = flash->width; info->map.phys = res->start; info->map.size = resource_size(res); @@ -73,7 +72,7 @@ static int pxa2xx_flash_probe(struct platform_device *pdev) return -ENOMEM; } info->map.cached = - ioremap_cached(info->map.phys, info->map.size); + ioremap_cache(info->map.phys, info->map.size); if (!info->map.cached) printk(KERN_WARNING "Failed to ioremap cached %s\n", info->map.name); diff --git a/drivers/mtd/maps/rbtx4939-flash.c b/drivers/mtd/maps/rbtx4939-flash.c index 93525121d69..146b6047ed2 100644 --- a/drivers/mtd/maps/rbtx4939-flash.c +++ b/drivers/mtd/maps/rbtx4939-flash.c @@ -13,7 +13,6 @@ #include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> -#include <linux/init.h> #include <linux/slab.h> #include <linux/device.h> #include <linux/platform_device.h> diff --git a/drivers/mtd/maps/sc520cdp.c b/drivers/mtd/maps/sc520cdp.c index 8fead8e46bc..093edd51bdc 100644 --- a/drivers/mtd/maps/sc520cdp.c +++ b/drivers/mtd/maps/sc520cdp.c @@ -183,7 +183,7 @@ static const struct sc520_par_table par_table[NUM_FLASH_BANKS] = static void sc520cdp_setup_par(void) { - volatile unsigned long __iomem *mmcr; + unsigned long __iomem *mmcr; unsigned long mmcr_val; int i, j; @@ -203,11 +203,11 @@ static void sc520cdp_setup_par(void) */ for(i = 0; i < NUM_FLASH_BANKS; i++) { /* for each par_table entry */ for(j = 0; j < NUM_SC520_PAR; j++) { /* for each PAR register */ - mmcr_val = mmcr[SC520_PAR(j)]; + mmcr_val = readl(&mmcr[SC520_PAR(j)]); /* if target device field matches, reprogram the PAR */ if((mmcr_val & SC520_PAR_TRGDEV) == par_table[i].trgdev) { - mmcr[SC520_PAR(j)] = par_table[i].new_par; + writel(par_table[i].new_par, &mmcr[SC520_PAR(j)]); break; } } diff --git a/drivers/mtd/maps/scb2_flash.c b/drivers/mtd/maps/scb2_flash.c index c77b68c9412..b7a22a612a4 100644 --- a/drivers/mtd/maps/scb2_flash.c +++ b/drivers/mtd/maps/scb2_flash.c @@ -47,7 +47,6 @@ #include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> -#include <linux/init.h> #include <asm/io.h> #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> @@ -212,7 +211,6 @@ static void scb2_flash_remove(struct pci_dev *dev) if (!region_fail) release_mem_region(SCB2_ADDR, SCB2_WINDOW); - pci_set_drvdata(dev, NULL); } static struct pci_device_id scb2_flash_pci_ids[] = { diff --git a/drivers/mtd/maps/solutionengine.c b/drivers/mtd/maps/solutionengine.c index 83a7a709156..bb580bc1644 100644 --- a/drivers/mtd/maps/solutionengine.c +++ b/drivers/mtd/maps/solutionengine.c @@ -33,28 +33,6 @@ struct map_info soleng_flash_map = { static const char * const probes[] = { "RedBoot", "cmdlinepart", NULL }; -#ifdef CONFIG_MTD_SUPERH_RESERVE -static struct mtd_partition superh_se_partitions[] = { - /* Reserved for boot code, read-only */ - { - .name = "flash_boot", - .offset = 0x00000000, - .size = CONFIG_MTD_SUPERH_RESERVE, - .mask_flags = MTD_WRITEABLE, - }, - /* All else is writable (e.g. JFFS) */ - { - .name = "Flash FS", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - } -}; -#define NUM_PARTITIONS ARRAY_SIZE(superh_se_partitions) -#else -#define superh_se_partitions NULL -#define NUM_PARTITIONS 0 -#endif /* CONFIG_MTD_SUPERH_RESERVE */ - static int __init init_soleng_maps(void) { /* First probe at offset 0 */ @@ -92,8 +70,7 @@ static int __init init_soleng_maps(void) mtd_device_register(eprom_mtd, NULL, 0); } - mtd_device_parse_register(flash_mtd, probes, NULL, - superh_se_partitions, NUM_PARTITIONS); + mtd_device_parse_register(flash_mtd, probes, NULL, NULL, 0); return 0; } diff --git a/drivers/mtd/maps/sun_uflash.c b/drivers/mtd/maps/sun_uflash.c index d467f3b11c9..b6f1aac3510 100644 --- a/drivers/mtd/maps/sun_uflash.c +++ b/drivers/mtd/maps/sun_uflash.c @@ -11,7 +11,6 @@ #include <linux/module.h> #include <linux/fs.h> #include <linux/errno.h> -#include <linux/init.h> #include <linux/ioport.h> #include <linux/of.h> #include <linux/of_device.h> @@ -75,7 +74,7 @@ int uflash_devinit(struct platform_device *op, struct device_node *dp) up->name = of_get_property(dp, "model", NULL); if (up->name && 0 < strlen(up->name)) - up->map.name = (char *)up->name; + up->map.name = up->name; up->map.phys = op->resource[0].start; diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c index 5073cbc796d..43e30992a36 100644 --- a/drivers/mtd/mtd_blkdevs.c +++ b/drivers/mtd/mtd_blkdevs.c @@ -30,7 +30,6 @@ #include <linux/blkpg.h> #include <linux/spinlock.h> #include <linux/hdreg.h> -#include <linux/init.h> #include <linux/mutex.h> #include <asm/uaccess.h> @@ -83,12 +82,14 @@ static int do_blktrans_request(struct mtd_blktrans_ops *tr, block = blk_rq_pos(req) << 9 >> tr->blkshift; nsect = blk_rq_cur_bytes(req) >> tr->blkshift; - - buf = req->buffer; + buf = bio_data(req->bio); if (req->cmd_type != REQ_TYPE_FS) return -EIO; + if (req->cmd_flags & REQ_FLUSH) + return tr->flush(dev); + if (blk_rq_pos(req) + blk_rq_cur_sectors(req) > get_capacity(req->rq_disk)) return -EIO; @@ -409,6 +410,9 @@ int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new) if (!new->rq) goto error3; + if (tr->flush) + blk_queue_flush(new->rq, REQ_FLUSH); + new->rq->queuedata = new; blk_queue_logical_block_size(new->rq, tr->blksize); diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c index 2aef5dda522..485ea751c7f 100644 --- a/drivers/mtd/mtdblock.c +++ b/drivers/mtd/mtdblock.c @@ -32,6 +32,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/blktrans.h> #include <linux/mutex.h> +#include <linux/major.h> struct mtdblk_dev { @@ -373,7 +374,7 @@ static void mtdblock_remove_dev(struct mtd_blktrans_dev *dev) static struct mtd_blktrans_ops mtdblock_tr = { .name = "mtdblock", - .major = 31, + .major = MTD_BLOCK_MAJOR, .part_bits = 0, .blksize = 512, .open = mtdblock_open, diff --git a/drivers/mtd/mtdblock_ro.c b/drivers/mtd/mtdblock_ro.c index 92759a9d298..fb5dc89369d 100644 --- a/drivers/mtd/mtdblock_ro.c +++ b/drivers/mtd/mtdblock_ro.c @@ -24,6 +24,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/blktrans.h> #include <linux/module.h> +#include <linux/major.h> static int mtdblock_readsect(struct mtd_blktrans_dev *dev, unsigned long block, char *buf) @@ -70,7 +71,7 @@ static void mtdblock_remove_dev(struct mtd_blktrans_dev *dev) static struct mtd_blktrans_ops mtdblock_tr = { .name = "mtdblock", - .major = 31, + .major = MTD_BLOCK_MAJOR, .part_bits = 0, .blksize = 512, .readsect = mtdblock_readsect, diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index 684bfa39e4e..a0f54e80670 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -32,6 +32,7 @@ #include <linux/mount.h> #include <linux/blkpg.h> #include <linux/magic.h> +#include <linux/major.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/map.h> @@ -323,6 +324,15 @@ static ssize_t mtdchar_write(struct file *file, const char __user *buf, size_t c default: ret = mtd_write(mtd, *ppos, len, &retlen, kbuf); } + + /* + * Return -ENOSPC only if no data could be written at all. + * Otherwise just return the number of bytes that actually + * have been written. + */ + if ((ret == -ENOSPC) && (total_retlen)) + break; + if (!ret) { *ppos += retlen; total_retlen += retlen; @@ -558,13 +568,18 @@ static int mtdchar_write_ioctl(struct mtd_info *mtd, { struct mtd_write_req req; struct mtd_oob_ops ops; - void __user *usr_data, *usr_oob; + const void __user *usr_data, *usr_oob; int ret; - if (copy_from_user(&req, argp, sizeof(req)) || - !access_ok(VERIFY_READ, req.usr_data, req.len) || - !access_ok(VERIFY_READ, req.usr_oob, req.ooblen)) + if (copy_from_user(&req, argp, sizeof(req))) return -EFAULT; + + usr_data = (const void __user *)(uintptr_t)req.usr_data; + usr_oob = (const void __user *)(uintptr_t)req.usr_oob; + if (!access_ok(VERIFY_READ, usr_data, req.len) || + !access_ok(VERIFY_READ, usr_oob, req.ooblen)) + return -EFAULT; + if (!mtd->_write_oob) return -EOPNOTSUPP; @@ -573,10 +588,7 @@ static int mtdchar_write_ioctl(struct mtd_info *mtd, ops.ooblen = (size_t)req.ooblen; ops.ooboffs = 0; - usr_data = (void __user *)(uintptr_t)req.usr_data; - usr_oob = (void __user *)(uintptr_t)req.usr_oob; - - if (req.usr_data) { + if (usr_data) { ops.datbuf = memdup_user(usr_data, ops.len); if (IS_ERR(ops.datbuf)) return PTR_ERR(ops.datbuf); @@ -584,7 +596,7 @@ static int mtdchar_write_ioctl(struct mtd_info *mtd, ops.datbuf = NULL; } - if (req.usr_oob) { + if (usr_oob) { ops.oobbuf = memdup_user(usr_oob, ops.ooblen); if (IS_ERR(ops.oobbuf)) { kfree(ops.datbuf); @@ -888,25 +900,26 @@ static int mtdchar_ioctl(struct file *file, u_int cmd, u_long arg) case OTPGETREGIONINFO: { struct otp_info *buf = kmalloc(4096, GFP_KERNEL); + size_t retlen; if (!buf) return -ENOMEM; switch (mfi->mode) { case MTD_FILE_MODE_OTP_FACTORY: - ret = mtd_get_fact_prot_info(mtd, buf, 4096); + ret = mtd_get_fact_prot_info(mtd, 4096, &retlen, buf); break; case MTD_FILE_MODE_OTP_USER: - ret = mtd_get_user_prot_info(mtd, buf, 4096); + ret = mtd_get_user_prot_info(mtd, 4096, &retlen, buf); break; default: ret = -EINVAL; break; } - if (ret >= 0) { + if (!ret) { if (cmd == OTPGETREGIONCOUNT) { - int nbr = ret / sizeof(struct otp_info); + int nbr = retlen / sizeof(struct otp_info); ret = copy_to_user(argp, &nbr, sizeof(int)); } else - ret = copy_to_user(argp, buf, ret); + ret = copy_to_user(argp, buf, retlen); if (ret) ret = -EFAULT; } @@ -1099,7 +1112,7 @@ static unsigned long mtdchar_get_unmapped_area(struct file *file, return (unsigned long) -EINVAL; ret = mtd_get_unmapped_area(mtd, len, offset, flags); - return ret == -EOPNOTSUPP ? -ENOSYS : ret; + return ret == -EOPNOTSUPP ? -ENODEV : ret; } #endif @@ -1124,9 +1137,9 @@ static int mtdchar_mmap(struct file *file, struct vm_area_struct *vma) #endif return vm_iomap_memory(vma, map->phys, map->size); } - return -ENOSYS; + return -ENODEV; #else - return vma->vm_flags & VM_SHARED ? 0 : -ENOSYS; + return vma->vm_flags & VM_SHARED ? 0 : -EACCES; #endif } diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 5e14d540ba2..d201feeb3ca 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -157,6 +157,9 @@ static ssize_t mtd_type_show(struct device *dev, case MTD_UBIVOLUME: type = "ubi"; break; + case MTD_MLCNANDFLASH: + type = "mlc-nand"; + break; default: type = "unknown"; } @@ -310,15 +313,7 @@ static struct attribute *mtd_attrs[] = { &dev_attr_bitflip_threshold.attr, NULL, }; - -static struct attribute_group mtd_group = { - .attrs = mtd_attrs, -}; - -static const struct attribute_group *mtd_groups[] = { - &mtd_group, - NULL, -}; +ATTRIBUTE_GROUPS(mtd); static struct device_type mtd_devtype = { .name = "mtd", @@ -888,14 +883,14 @@ EXPORT_SYMBOL_GPL(mtd_read_oob); * devices. The user data is one time programmable but the factory data is read * only. */ -int mtd_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf, - size_t len) +int mtd_get_fact_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen, + struct otp_info *buf) { if (!mtd->_get_fact_prot_info) return -EOPNOTSUPP; if (!len) return 0; - return mtd->_get_fact_prot_info(mtd, buf, len); + return mtd->_get_fact_prot_info(mtd, len, retlen, buf); } EXPORT_SYMBOL_GPL(mtd_get_fact_prot_info); @@ -911,14 +906,14 @@ int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len, } EXPORT_SYMBOL_GPL(mtd_read_fact_prot_reg); -int mtd_get_user_prot_info(struct mtd_info *mtd, struct otp_info *buf, - size_t len) +int mtd_get_user_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen, + struct otp_info *buf) { if (!mtd->_get_user_prot_info) return -EOPNOTSUPP; if (!len) return 0; - return mtd->_get_user_prot_info(mtd, buf, len); + return mtd->_get_user_prot_info(mtd, len, retlen, buf); } EXPORT_SYMBOL_GPL(mtd_get_user_prot_info); @@ -937,12 +932,22 @@ EXPORT_SYMBOL_GPL(mtd_read_user_prot_reg); int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, u_char *buf) { + int ret; + *retlen = 0; if (!mtd->_write_user_prot_reg) return -EOPNOTSUPP; if (!len) return 0; - return mtd->_write_user_prot_reg(mtd, to, len, retlen, buf); + ret = mtd->_write_user_prot_reg(mtd, to, len, retlen, buf); + if (ret) + return ret; + + /* + * If no data could be written at all, we are out of memory and + * must return -ENOSPC. + */ + return (*retlen) ? 0 : -ENOSPC; } EXPORT_SYMBOL_GPL(mtd_write_user_prot_reg); diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index 6e732c3820c..1ca9aec141f 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -150,11 +150,12 @@ static int part_read_user_prot_reg(struct mtd_info *mtd, loff_t from, retlen, buf); } -static int part_get_user_prot_info(struct mtd_info *mtd, - struct otp_info *buf, size_t len) +static int part_get_user_prot_info(struct mtd_info *mtd, size_t len, + size_t *retlen, struct otp_info *buf) { struct mtd_part *part = PART(mtd); - return part->master->_get_user_prot_info(part->master, buf, len); + return part->master->_get_user_prot_info(part->master, len, retlen, + buf); } static int part_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, @@ -165,11 +166,12 @@ static int part_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, retlen, buf); } -static int part_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf, - size_t len) +static int part_get_fact_prot_info(struct mtd_info *mtd, size_t len, + size_t *retlen, struct otp_info *buf) { struct mtd_part *part = PART(mtd); - return part->master->_get_fact_prot_info(part->master, buf, len); + return part->master->_get_fact_prot_info(part->master, len, retlen, + buf); } static int part_write(struct mtd_info *mtd, loff_t to, size_t len, @@ -534,7 +536,7 @@ out_register: return slave; } -int mtd_add_partition(struct mtd_info *master, char *name, +int mtd_add_partition(struct mtd_info *master, const char *name, long long offset, long long length) { struct mtd_partition part; @@ -672,22 +674,19 @@ static struct mtd_part_parser *get_partition_parser(const char *name) #define put_partition_parser(p) do { module_put((p)->owner); } while (0) -int register_mtd_parser(struct mtd_part_parser *p) +void register_mtd_parser(struct mtd_part_parser *p) { spin_lock(&part_parser_lock); list_add(&p->list, &part_parsers); spin_unlock(&part_parser_lock); - - return 0; } EXPORT_SYMBOL_GPL(register_mtd_parser); -int deregister_mtd_parser(struct mtd_part_parser *p) +void deregister_mtd_parser(struct mtd_part_parser *p) { spin_lock(&part_parser_lock); list_del(&p->list); spin_unlock(&part_parser_lock); - return 0; } EXPORT_SYMBOL_GPL(deregister_mtd_parser); diff --git a/drivers/mtd/mtdsuper.c b/drivers/mtd/mtdsuper.c index 334da5f583c..20c02a3b741 100644 --- a/drivers/mtd/mtdsuper.c +++ b/drivers/mtd/mtdsuper.c @@ -17,6 +17,7 @@ #include <linux/export.h> #include <linux/ctype.h> #include <linux/slab.h> +#include <linux/major.h> /* * compare superblocks to see if they're equivalent diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index d88529841d3..f1cf503517f 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -95,44 +95,16 @@ config MTD_NAND_OMAP2 platforms. config MTD_NAND_OMAP_BCH - depends on MTD_NAND && MTD_NAND_OMAP2 && ARCH_OMAP3 - tristate "Enable support for hardware BCH error correction" + depends on MTD_NAND_OMAP2 + tristate "Support hardware based BCH error correction" default n select BCH - select BCH_CONST_PARAMS help - Support for hardware BCH error correction. - -choice - prompt "BCH error correction capability" - depends on MTD_NAND_OMAP_BCH - -config MTD_NAND_OMAP_BCH8 - bool "8 bits / 512 bytes (recommended)" - help - Support correcting up to 8 bitflips per 512-byte block. - This will use 13 bytes of spare area per 512 bytes of page data. - This is the recommended mode, as 4-bit mode does not work - on some OMAP3 revisions, due to a hardware bug. - -config MTD_NAND_OMAP_BCH4 - bool "4 bits / 512 bytes" - help - Support correcting up to 4 bitflips per 512-byte block. - This will use 7 bytes of spare area per 512 bytes of page data. - Note that this mode does not work on some OMAP3 revisions, due to a - hardware bug. Please check your OMAP datasheet before selecting this - mode. - -endchoice - -if MTD_NAND_OMAP_BCH -config BCH_CONST_M - default 13 -config BCH_CONST_T - default 4 if MTD_NAND_OMAP_BCH4 - default 8 if MTD_NAND_OMAP_BCH8 -endif + This config enables the ELM hardware engine, which can be used to + locate and correct errors when using BCH ECC scheme. This offloads + the cpu from doing ECC error searching and correction. However some + legacy OMAP families like OMAP2xxx, OMAP3xxx do not have ELM engine + so they should not enable this config symbol. config MTD_NAND_IDS tristate @@ -354,11 +326,11 @@ config MTD_NAND_ATMEL on Atmel AT91 and AVR32 processors. config MTD_NAND_PXA3xx - tristate "Support for NAND flash devices on PXA3xx" + tristate "NAND support on PXA3xx and Armada 370/XP" depends on PXA3xx || ARCH_MMP || PLAT_ORION help This enables the driver for the NAND flash device found on - PXA3xx processors + PXA3xx processors (NFCv1) and also on Armada 370/XP (NFCv2). config MTD_NAND_SLC_LPC32XX tristate "NXP LPC32xx SLC Controller" @@ -456,6 +428,7 @@ config MTD_NAND_FSL_IFC tristate "NAND support for Freescale IFC controller" depends on MTD_NAND && FSL_SOC select FSL_IFC + select MEMORY help Various Freescale chips e.g P1010, include a NAND Flash machine with built-in hardware ECC capabilities. @@ -486,17 +459,19 @@ config MTD_NAND_MXC config MTD_NAND_SH_FLCTL tristate "Support for NAND on Renesas SuperH FLCTL" - depends on SUPERH || ARCH_SHMOBILE + depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST + depends on HAS_IOMEM + depends on HAS_DMA help Several Renesas SuperH CPU has FLCTL. This option enables support for NAND Flash using FLCTL. config MTD_NAND_DAVINCI - tristate "Support NAND on DaVinci SoC" - depends on ARCH_DAVINCI + tristate "Support NAND on DaVinci/Keystone SoC" + depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF) help Enable the driver for NAND flash chips on Texas Instruments - DaVinci processors. + DaVinci/Keystone processors. config MTD_NAND_TXX9NDFMC tristate "NAND Flash support for TXx9 SoC" diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c index 8611eb4b45f..4936e9e0002 100644 --- a/drivers/mtd/nand/ams-delta.c +++ b/drivers/mtd/nand/ams-delta.c @@ -17,7 +17,6 @@ */ #include <linux/slab.h> -#include <linux/init.h> #include <linux/module.h> #include <linux/delay.h> #include <linux/mtd/mtd.h> diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 060feeaf6b3..4ce181a35bc 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -375,8 +375,7 @@ static int atmel_nand_dma_op(struct mtd_info *mtd, void *buf, int len, dma_dev = host->dma_chan->device; - flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_SRC_UNMAP | - DMA_COMPL_SKIP_DEST_UNMAP; + flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT; phys_addr = dma_map_single(dma_dev->dev, p, len, dir); if (dma_mapping_error(dma_dev->dev, phys_addr)) { @@ -431,7 +430,7 @@ err_dma: dma_unmap_single(dma_dev->dev, phys_addr, len, dir); err_buf: if (err != 0) - dev_warn(host->dev, "Fall back to CPU I/O\n"); + dev_dbg(host->dev, "Fall back to CPU I/O\n"); return err; } @@ -1062,56 +1061,28 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd) } /* - * Get ECC requirement in ONFI parameters, returns -1 if ONFI - * parameters is not supported. - * return 0 if success to get the ECC requirement. - */ -static int get_onfi_ecc_param(struct nand_chip *chip, - int *ecc_bits, int *sector_size) -{ - *ecc_bits = *sector_size = 0; - - if (chip->onfi_params.ecc_bits == 0xff) - /* TODO: the sector_size and ecc_bits need to be find in - * extended ecc parameter, currently we don't support it. - */ - return -1; - - *ecc_bits = chip->onfi_params.ecc_bits; - - /* The default sector size (ecc codeword size) is 512 */ - *sector_size = 512; - - return 0; -} - -/* - * Get ecc requirement from ONFI parameters ecc requirement. + * Get minimum ecc requirements from NAND. * If pmecc-cap, pmecc-sector-size in DTS are not specified, this function - * will set them according to ONFI ecc requirement. Otherwise, use the + * will set them according to minimum ecc requirement. Otherwise, use the * value in DTS file. * return 0 if success. otherwise return error code. */ static int pmecc_choose_ecc(struct atmel_nand_host *host, int *cap, int *sector_size) { - /* Get ECC requirement from ONFI parameters */ - *cap = *sector_size = 0; - if (host->nand_chip.onfi_version) { - if (!get_onfi_ecc_param(&host->nand_chip, cap, sector_size)) - dev_info(host->dev, "ONFI params, minimum required ECC: %d bits in %d bytes\n", + /* Get minimum ECC requirements */ + if (host->nand_chip.ecc_strength_ds) { + *cap = host->nand_chip.ecc_strength_ds; + *sector_size = host->nand_chip.ecc_step_ds; + dev_info(host->dev, "minimum ECC: %d bits in %d bytes\n", *cap, *sector_size); - else - dev_info(host->dev, "NAND chip ECC reqirement is in Extended ONFI parameter, we don't support yet.\n"); } else { - dev_info(host->dev, "NAND chip is not ONFI compliant, assume ecc_bits is 2 in 512 bytes"); - } - if (*cap == 0 && *sector_size == 0) { *cap = 2; *sector_size = 512; + dev_info(host->dev, "can't detect min. ECC, assume 2 bits in 512 bytes\n"); } - /* If dts file doesn't specify then use the one in ONFI parameters */ + /* If device tree doesn't specify, use NAND's minimum ECC parameters */ if (host->pmecc_corr_cap == 0) { /* use the most fitable ecc bits (the near bigger one ) */ if (*cap <= 2) @@ -1139,7 +1110,7 @@ static int pmecc_choose_ecc(struct atmel_nand_host *host, return 0; } -static int __init atmel_pmecc_nand_init_params(struct platform_device *pdev, +static int atmel_pmecc_nand_init_params(struct platform_device *pdev, struct atmel_nand_host *host) { struct mtd_info *mtd = &host->mtd; @@ -1249,6 +1220,7 @@ static int __init atmel_pmecc_nand_init_params(struct platform_device *pdev, goto err; } + nand_chip->options |= NAND_NO_SUBPAGE_WRITE; nand_chip->ecc.read_page = atmel_nand_pmecc_read_page; nand_chip->ecc.write_page = atmel_nand_pmecc_write_page; @@ -1449,7 +1421,6 @@ static void atmel_nand_hwctl(struct mtd_info *mtd, int mode) ecc_writel(host->ecc, CR, ATMEL_ECC_RST); } -#if defined(CONFIG_OF) static int atmel_of_init_port(struct atmel_nand_host *host, struct device_node *np) { @@ -1457,7 +1428,7 @@ static int atmel_of_init_port(struct atmel_nand_host *host, u32 offset[2]; int ecc_mode; struct atmel_nand_data *board = &host->board; - enum of_gpio_flags flags; + enum of_gpio_flags flags = 0; if (of_property_read_u32(np, "atmel,nand-addr-offset", &val) == 0) { if (val >= 32) { @@ -1540,15 +1511,8 @@ static int atmel_of_init_port(struct atmel_nand_host *host, return 0; } -#else -static int atmel_of_init_port(struct atmel_nand_host *host, - struct device_node *np) -{ - return -EINVAL; -} -#endif -static int __init atmel_hw_nand_init_params(struct platform_device *pdev, +static int atmel_hw_nand_init_params(struct platform_device *pdev, struct atmel_nand_host *host) { struct mtd_info *mtd = &host->mtd; @@ -1696,8 +1660,8 @@ static void nfc_select_chip(struct mtd_info *mtd, int chip) nfc_writel(host->nfc->hsmc_regs, CTRL, NFC_CTRL_ENABLE); } -static int nfc_make_addr(struct mtd_info *mtd, int column, int page_addr, - unsigned int *addr1234, unsigned int *cycle0) +static int nfc_make_addr(struct mtd_info *mtd, int command, int column, + int page_addr, unsigned int *addr1234, unsigned int *cycle0) { struct nand_chip *chip = mtd->priv; @@ -1711,7 +1675,8 @@ static int nfc_make_addr(struct mtd_info *mtd, int column, int page_addr, *addr1234 = 0; if (column != -1) { - if (chip->options & NAND_BUSWIDTH_16) + if (chip->options & NAND_BUSWIDTH_16 && + !nand_opcode_8bits(command)) column >>= 1; addr_bytes[acycle++] = column & 0xff; if (mtd->writesize > 512) @@ -1824,8 +1789,8 @@ static void nfc_nand_command(struct mtd_info *mtd, unsigned int command, } if (do_addr) - acycle = nfc_make_addr(mtd, column, page_addr, &addr1234, - &cycle0); + acycle = nfc_make_addr(mtd, command, column, page_addr, + &addr1234, &cycle0); nfc_addr_cmd = cmd1 | cmd2 | vcmd2 | acycle | csid | dataen | nfcwr; nfc_send_command(host, nfc_addr_cmd, addr1234, cycle0); @@ -1987,7 +1952,7 @@ static struct platform_driver atmel_nand_nfc_driver; /* * Probe for the NAND device. */ -static int __init atmel_nand_probe(struct platform_device *pdev) +static int atmel_nand_probe(struct platform_device *pdev) { struct atmel_nand_host *host; struct mtd_info *mtd; @@ -1998,10 +1963,8 @@ static int __init atmel_nand_probe(struct platform_device *pdev) /* Allocate memory for the device structure (and zero it) */ host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL); - if (!host) { - printk(KERN_ERR "atmel_nand: failed to allocate device structure.\n"); + if (!host) return -ENOMEM; - } res = platform_driver_register(&atmel_nand_nfc_driver); if (res) @@ -2019,7 +1982,8 @@ static int __init atmel_nand_probe(struct platform_device *pdev) mtd = &host->mtd; nand_chip = &host->nand_chip; host->dev = &pdev->dev; - if (pdev->dev.of_node) { + if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) { + /* Only when CONFIG_OF is enabled of_node can be parsed */ res = atmel_of_init_port(host, pdev->dev.of_node); if (res) goto err_nand_ioremap; @@ -2098,14 +2062,14 @@ static int __init atmel_nand_probe(struct platform_device *pdev) } if (gpio_get_value(host->board.det_pin)) { - printk(KERN_INFO "No SmartMedia card inserted.\n"); + dev_info(&pdev->dev, "No SmartMedia card inserted.\n"); res = -ENXIO; goto err_no_card; } } if (host->board.on_flash_bbt || on_flash_bbt) { - printk(KERN_INFO "atmel_nand: Use On Flash BBT\n"); + dev_info(&pdev->dev, "Use On Flash BBT\n"); nand_chip->bbt_options |= NAND_BBT_USE_FLASH; } @@ -2177,14 +2141,13 @@ err_no_card: if (host->dma_chan) dma_release_channel(host->dma_chan); err_nand_ioremap: - platform_driver_unregister(&atmel_nand_nfc_driver); return res; } /* * Remove a NAND device. */ -static int __exit atmel_nand_remove(struct platform_device *pdev) +static int atmel_nand_remove(struct platform_device *pdev) { struct atmel_nand_host *host = platform_get_drvdata(pdev); struct mtd_info *mtd = &host->mtd; @@ -2207,14 +2170,12 @@ static int __exit atmel_nand_remove(struct platform_device *pdev) return 0; } -#if defined(CONFIG_OF) static const struct of_device_id atmel_nand_dt_ids[] = { { .compatible = "atmel,at91rm9200-nand" }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, atmel_nand_dt_ids); -#endif static int atmel_nand_nfc_probe(struct platform_device *pdev) { @@ -2253,12 +2214,11 @@ static int atmel_nand_nfc_probe(struct platform_device *pdev) return 0; } -#if defined(CONFIG_OF) -static struct of_device_id atmel_nand_nfc_match[] = { +static const struct of_device_id atmel_nand_nfc_match[] = { { .compatible = "atmel,sama5d3-nfc" }, { /* sentinel */ } }; -#endif +MODULE_DEVICE_TABLE(of, atmel_nand_nfc_match); static struct platform_driver atmel_nand_nfc_driver = { .driver = { @@ -2270,7 +2230,8 @@ static struct platform_driver atmel_nand_nfc_driver = { }; static struct platform_driver atmel_nand_driver = { - .remove = __exit_p(atmel_nand_remove), + .probe = atmel_nand_probe, + .remove = atmel_nand_remove, .driver = { .name = "atmel_nand", .owner = THIS_MODULE, @@ -2278,7 +2239,7 @@ static struct platform_driver atmel_nand_driver = { }, }; -module_platform_driver_probe(atmel_nand_driver, atmel_nand_probe); +module_platform_driver(atmel_nand_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Rick Bronson"); diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c index ae8dd7c4103..bc5c518828d 100644 --- a/drivers/mtd/nand/au1550nd.c +++ b/drivers/mtd/nand/au1550nd.c @@ -11,7 +11,6 @@ #include <linux/slab.h> #include <linux/gpio.h> -#include <linux/init.h> #include <linux/module.h> #include <linux/interrupt.h> #include <linux/mtd/mtd.h> @@ -308,7 +307,8 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i /* Serially input address */ if (column != -1) { /* Adjust columns for 16 bit buswidth */ - if (this->options & NAND_BUSWIDTH_16) + if (this->options & NAND_BUSWIDTH_16 && + !nand_opcode_8bits(command)) column >>= 1; ctx->write_byte(mtd, column); } @@ -418,10 +418,8 @@ static int au1550nd_probe(struct platform_device *pdev) } ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); - if (!ctx) { - dev_err(&pdev->dev, "no memory for NAND context\n"); + if (!ctx) return -ENOMEM; - } r = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!r) { @@ -480,6 +478,8 @@ static int au1550nd_probe(struct platform_device *pdev) mtd_device_register(&ctx->info, pd->parts, pd->num_parts); + platform_set_drvdata(pdev, ctx); + return 0; out3: diff --git a/drivers/mtd/nand/bcm47xxnflash/main.c b/drivers/mtd/nand/bcm47xxnflash/main.c index 7bae569fdc7..10744591131 100644 --- a/drivers/mtd/nand/bcm47xxnflash/main.c +++ b/drivers/mtd/nand/bcm47xxnflash/main.c @@ -29,11 +29,9 @@ static int bcm47xxnflash_probe(struct platform_device *pdev) struct bcm47xxnflash *b47n; int err = 0; - b47n = kzalloc(sizeof(*b47n), GFP_KERNEL); - if (!b47n) { - err = -ENOMEM; - goto out; - } + b47n = devm_kzalloc(&pdev->dev, sizeof(*b47n), GFP_KERNEL); + if (!b47n) + return -ENOMEM; b47n->nand_chip.priv = b47n; b47n->mtd.owner = THIS_MODULE; @@ -48,22 +46,16 @@ static int bcm47xxnflash_probe(struct platform_device *pdev) } if (err) { pr_err("Initialization failed: %d\n", err); - goto err_init; + return err; } err = mtd_device_parse_register(&b47n->mtd, probes, NULL, NULL, 0); if (err) { pr_err("Failed to register MTD device: %d\n", err); - goto err_dev_reg; + return err; } return 0; - -err_dev_reg: -err_init: - kfree(b47n); -out: - return err; } static int bcm47xxnflash_remove(struct platform_device *pdev) @@ -85,22 +77,4 @@ static struct platform_driver bcm47xxnflash_driver = { }, }; -static int __init bcm47xxnflash_init(void) -{ - int err; - - err = platform_driver_register(&bcm47xxnflash_driver); - if (err) - pr_err("Failed to register bcm47xx nand flash driver: %d\n", - err); - - return err; -} - -static void __exit bcm47xxnflash_exit(void) -{ - platform_driver_unregister(&bcm47xxnflash_driver); -} - -module_init(bcm47xxnflash_init); -module_exit(bcm47xxnflash_exit); +module_platform_driver(bcm47xxnflash_driver); diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c index 2c42e125720..722898aea7a 100644 --- a/drivers/mtd/nand/bf5xx_nand.c +++ b/drivers/mtd/nand/bf5xx_nand.c @@ -37,7 +37,6 @@ #include <linux/module.h> #include <linux/types.h> -#include <linux/init.h> #include <linux/kernel.h> #include <linux/string.h> #include <linux/ioport.h> @@ -680,9 +679,6 @@ static int bf5xx_nand_remove(struct platform_device *pdev) peripheral_free_list(bfin_nfc_pin_req); bf5xx_nand_dma_remove(info); - /* free the common resources */ - kfree(info); - return 0; } @@ -743,11 +739,10 @@ static int bf5xx_nand_probe(struct platform_device *pdev) return -EFAULT; } - info = kzalloc(sizeof(*info), GFP_KERNEL); + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); if (info == NULL) { - dev_err(&pdev->dev, "no memory for flash info\n"); err = -ENOMEM; - goto out_err_kzalloc; + goto out_err; } platform_set_drvdata(pdev, info); @@ -792,7 +787,7 @@ static int bf5xx_nand_probe(struct platform_device *pdev) /* initialise the hardware */ err = bf5xx_nand_hw_init(info); if (err) - goto out_err_hw_init; + goto out_err; /* setup hardware ECC data struct */ if (hardware_ecc) { @@ -829,9 +824,7 @@ static int bf5xx_nand_probe(struct platform_device *pdev) out_err_nand_scan: bf5xx_nand_dma_remove(info); -out_err_hw_init: - kfree(info); -out_err_kzalloc: +out_err: peripheral_free_list(bfin_nfc_pin_req); return err; diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c index c34985a5510..4e66726da9a 100644 --- a/drivers/mtd/nand/cafe_nand.c +++ b/drivers/mtd/nand/cafe_nand.c @@ -627,6 +627,8 @@ static int cafe_nand_probe(struct pci_dev *pdev, struct cafe_priv *cafe; uint32_t ctrl; int err = 0; + int old_dma; + struct nand_buffers *nbuf; /* Very old versions shared the same PCI ident for all three functions on the chip. Verify the class too... */ @@ -640,10 +642,8 @@ static int cafe_nand_probe(struct pci_dev *pdev, pci_set_master(pdev); mtd = kzalloc(sizeof(*mtd) + sizeof(struct cafe_priv), GFP_KERNEL); - if (!mtd) { - dev_warn(&pdev->dev, "failed to alloc mtd_info\n"); + if (!mtd) return -ENOMEM; - } cafe = (void *)(&mtd[1]); mtd->dev.parent = &pdev->dev; @@ -657,13 +657,6 @@ static int cafe_nand_probe(struct pci_dev *pdev, err = -ENOMEM; goto out_free_mtd; } - cafe->dmabuf = dma_alloc_coherent(&cafe->pdev->dev, 2112 + sizeof(struct nand_buffers), - &cafe->dmaaddr, GFP_KERNEL); - if (!cafe->dmabuf) { - err = -ENOMEM; - goto out_ior; - } - cafe->nand.buffers = (void *)cafe->dmabuf + 2112; cafe->rs = init_rs_non_canonical(12, &cafe_mul, 0, 1, 8); if (!cafe->rs) { @@ -723,7 +716,7 @@ static int cafe_nand_probe(struct pci_dev *pdev, "CAFE NAND", mtd); if (err) { dev_warn(&pdev->dev, "Could not register IRQ %d\n", pdev->irq); - goto out_free_dma; + goto out_ior; } /* Disable master reset, enable NAND clock */ @@ -737,6 +730,32 @@ static int cafe_nand_probe(struct pci_dev *pdev, cafe_writel(cafe, 0x7006, GLOBAL_CTRL); cafe_writel(cafe, 0x700a, GLOBAL_CTRL); + /* Enable NAND IRQ in global IRQ mask register */ + cafe_writel(cafe, 0x80000007, GLOBAL_IRQ_MASK); + cafe_dev_dbg(&cafe->pdev->dev, "Control %x, IRQ mask %x\n", + cafe_readl(cafe, GLOBAL_CTRL), + cafe_readl(cafe, GLOBAL_IRQ_MASK)); + + /* Do not use the DMA for the nand_scan_ident() */ + old_dma = usedma; + usedma = 0; + + /* Scan to find existence of the device */ + if (nand_scan_ident(mtd, 2, NULL)) { + err = -ENXIO; + goto out_irq; + } + + cafe->dmabuf = dma_alloc_coherent(&cafe->pdev->dev, + 2112 + sizeof(struct nand_buffers) + + mtd->writesize + mtd->oobsize, + &cafe->dmaaddr, GFP_KERNEL); + if (!cafe->dmabuf) { + err = -ENOMEM; + goto out_irq; + } + cafe->nand.buffers = nbuf = (void *)cafe->dmabuf + 2112; + /* Set up DMA address */ cafe_writel(cafe, cafe->dmaaddr & 0xffffffff, NAND_DMA_ADDR0); if (sizeof(cafe->dmaaddr) > 4) @@ -748,16 +767,13 @@ static int cafe_nand_probe(struct pci_dev *pdev, cafe_dev_dbg(&cafe->pdev->dev, "Set DMA address to %x (virt %p)\n", cafe_readl(cafe, NAND_DMA_ADDR0), cafe->dmabuf); - /* Enable NAND IRQ in global IRQ mask register */ - cafe_writel(cafe, 0x80000007, GLOBAL_IRQ_MASK); - cafe_dev_dbg(&cafe->pdev->dev, "Control %x, IRQ mask %x\n", - cafe_readl(cafe, GLOBAL_CTRL), cafe_readl(cafe, GLOBAL_IRQ_MASK)); + /* this driver does not need the @ecccalc and @ecccode */ + nbuf->ecccalc = NULL; + nbuf->ecccode = NULL; + nbuf->databuf = (uint8_t *)(nbuf + 1); - /* Scan to find existence of the device */ - if (nand_scan_ident(mtd, 2, NULL)) { - err = -ENXIO; - goto out_irq; - } + /* Restore the DMA flag */ + usedma = old_dma; cafe->ctl2 = 1<<27; /* Reed-Solomon ECC */ if (mtd->writesize == 2048) @@ -775,7 +791,7 @@ static int cafe_nand_probe(struct pci_dev *pdev, } else { printk(KERN_WARNING "Unexpected NAND flash writesize %d. Aborting\n", mtd->writesize); - goto out_irq; + goto out_free_dma; } cafe->nand.ecc.mode = NAND_ECC_HW_SYNDROME; cafe->nand.ecc.size = mtd->writesize; @@ -792,7 +808,7 @@ static int cafe_nand_probe(struct pci_dev *pdev, err = nand_scan_tail(mtd); if (err) - goto out_irq; + goto out_free_dma; pci_set_drvdata(pdev, mtd); @@ -801,12 +817,15 @@ static int cafe_nand_probe(struct pci_dev *pdev, goto out; + out_free_dma: + dma_free_coherent(&cafe->pdev->dev, + 2112 + sizeof(struct nand_buffers) + + mtd->writesize + mtd->oobsize, + cafe->dmabuf, cafe->dmaaddr); out_irq: /* Disable NAND IRQ in global IRQ mask register */ cafe_writel(cafe, ~1 & cafe_readl(cafe, GLOBAL_IRQ_MASK), GLOBAL_IRQ_MASK); free_irq(pdev->irq, mtd); - out_free_dma: - dma_free_coherent(&cafe->pdev->dev, 2112, cafe->dmabuf, cafe->dmaaddr); out_ior: pci_iounmap(pdev, cafe->mmio); out_free_mtd: @@ -826,7 +845,10 @@ static void cafe_nand_remove(struct pci_dev *pdev) nand_release(mtd); free_rs(cafe->rs); pci_iounmap(pdev, cafe->mmio); - dma_free_coherent(&cafe->pdev->dev, 2112, cafe->dmabuf, cafe->dmaaddr); + dma_free_coherent(&cafe->pdev->dev, + 2112 + sizeof(struct nand_buffers) + + mtd->writesize + mtd->oobsize, + cafe->dmabuf, cafe->dmaaddr); kfree(mtd); } diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c index 39b2ef84881..66ec95e6ca6 100644 --- a/drivers/mtd/nand/cmx270_nand.c +++ b/drivers/mtd/nand/cmx270_nand.c @@ -164,7 +164,6 @@ static int __init cmx270_init(void) sizeof(struct nand_chip), GFP_KERNEL); if (!cmx270_nand_mtd) { - pr_debug("Unable to allocate CM-X270 NAND MTD device structure.\n"); ret = -ENOMEM; goto err_kzalloc; } diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c index d469a9a1dea..88109d375ae 100644 --- a/drivers/mtd/nand/cs553x_nand.c +++ b/drivers/mtd/nand/cs553x_nand.c @@ -199,7 +199,6 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr) /* Allocate memory for MTD device structure and private data */ new_mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); if (!new_mtd) { - printk(KERN_WARNING "Unable to allocate CS553X NAND MTD device structure.\n"); err = -ENOMEM; goto out; } diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index b77a01efb48..b922c8efcf4 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -24,7 +24,6 @@ */ #include <linux/kernel.h> -#include <linux/init.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/err.h> @@ -35,6 +34,7 @@ #include <linux/slab.h> #include <linux/of_device.h> #include <linux/of.h> +#include <linux/of_mtd.h> #include <linux/platform_data/mtd-davinci.h> #include <linux/platform_data/mtd-davinci-aemif.h> @@ -487,7 +487,7 @@ static int nand_davinci_dev_ready(struct mtd_info *mtd) * ten ECC bytes plus the manufacturer's bad block marker byte, and * and not overlapping the default BBT markers. */ -static struct nand_ecclayout hwecc4_small __initconst = { +static struct nand_ecclayout hwecc4_small = { .eccbytes = 10, .eccpos = { 0, 1, 2, 3, 4, /* offset 5 holds the badblock marker */ @@ -503,7 +503,7 @@ static struct nand_ecclayout hwecc4_small __initconst = { * storing ten ECC bytes plus the manufacturer's bad block marker byte, * and not overlapping the default BBT markers. */ -static struct nand_ecclayout hwecc4_2048 __initconst = { +static struct nand_ecclayout hwecc4_2048 = { .eccbytes = 40, .eccpos = { /* at the end of spare sector */ @@ -523,6 +523,7 @@ static struct nand_ecclayout hwecc4_2048 __initconst = { #if defined(CONFIG_OF) static const struct of_device_id davinci_nand_of_match[] = { {.compatible = "ti,davinci-nand", }, + {.compatible = "ti,keystone-nand", }, {}, }; MODULE_DEVICE_TABLE(of, davinci_nand_of_match); @@ -534,17 +535,19 @@ static struct davinci_nand_pdata struct davinci_nand_pdata *pdata; const char *mode; u32 prop; - int len; pdata = devm_kzalloc(&pdev->dev, sizeof(struct davinci_nand_pdata), GFP_KERNEL); pdev->dev.platform_data = pdata; if (!pdata) - return NULL; + return ERR_PTR(-ENOMEM); if (!of_property_read_u32(pdev->dev.of_node, "ti,davinci-chipselect", &prop)) pdev->id = prop; + else + return ERR_PTR(-EINVAL); + if (!of_property_read_u32(pdev->dev.of_node, "ti,davinci-mask-ale", &prop)) pdata->mask_ale = prop; @@ -555,6 +558,8 @@ static struct davinci_nand_pdata "ti,davinci-mask-chipsel", &prop)) pdata->mask_chipsel = prop; if (!of_property_read_string(pdev->dev.of_node, + "nand-ecc-mode", &mode) || + !of_property_read_string(pdev->dev.of_node, "ti,davinci-ecc-mode", &mode)) { if (!strncmp("none", mode, 4)) pdata->ecc_mode = NAND_ECC_NONE; @@ -566,13 +571,22 @@ static struct davinci_nand_pdata if (!of_property_read_u32(pdev->dev.of_node, "ti,davinci-ecc-bits", &prop)) pdata->ecc_bits = prop; - if (!of_property_read_u32(pdev->dev.of_node, + + prop = of_get_nand_bus_width(pdev->dev.of_node); + if (0 < prop || !of_property_read_u32(pdev->dev.of_node, "ti,davinci-nand-buswidth", &prop)) if (prop == 16) pdata->options |= NAND_BUSWIDTH_16; - if (of_find_property(pdev->dev.of_node, - "ti,davinci-nand-use-bbt", &len)) + if (of_property_read_bool(pdev->dev.of_node, + "nand-on-flash-bbt") || + of_property_read_bool(pdev->dev.of_node, + "ti,davinci-nand-use-bbt")) pdata->bbt_options = NAND_BBT_USE_FLASH; + + if (of_device_is_compatible(pdev->dev.of_node, + "ti,keystone-nand")) { + pdata->options |= NAND_NO_SUBPAGE_WRITE; + } } return dev_get_platdata(&pdev->dev); @@ -585,7 +599,7 @@ static struct davinci_nand_pdata } #endif -static int __init nand_davinci_probe(struct platform_device *pdev) +static int nand_davinci_probe(struct platform_device *pdev) { struct davinci_nand_pdata *pdata; struct davinci_nand_info *info; @@ -598,6 +612,9 @@ static int __init nand_davinci_probe(struct platform_device *pdev) nand_ecc_modes_t ecc_mode; pdata = nand_davinci_get_pdata(pdev); + if (IS_ERR(pdata)) + return PTR_ERR(pdata); + /* insist on board-specific configuration */ if (!pdata) return -ENODEV; @@ -607,11 +624,8 @@ static int __init nand_davinci_probe(struct platform_device *pdev) return -ENODEV; info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); - if (!info) { - dev_err(&pdev->dev, "unable to allocate memory\n"); - ret = -ENOMEM; - goto err_nomem; - } + if (!info) + return -ENOMEM; platform_set_drvdata(pdev, info); @@ -619,19 +633,23 @@ static int __init nand_davinci_probe(struct platform_device *pdev) res2 = platform_get_resource(pdev, IORESOURCE_MEM, 1); if (!res1 || !res2) { dev_err(&pdev->dev, "resource missing\n"); - ret = -EINVAL; - goto err_nomem; + return -EINVAL; } vaddr = devm_ioremap_resource(&pdev->dev, res1); - if (IS_ERR(vaddr)) { - ret = PTR_ERR(vaddr); - goto err_ioremap; - } - base = devm_ioremap_resource(&pdev->dev, res2); - if (IS_ERR(base)) { - ret = PTR_ERR(base); - goto err_ioremap; + if (IS_ERR(vaddr)) + return PTR_ERR(vaddr); + + /* + * This registers range is used to setup NAND settings. In case with + * TI AEMIF driver, the same memory address range is requested already + * by AEMIF, so we cannot request it twice, just ioremap. + * The AEMIF and NAND drivers not use the same registers in this range. + */ + base = devm_ioremap(&pdev->dev, res2->start, resource_size(res2)); + if (!base) { + dev_err(&pdev->dev, "ioremap failed for resource %pR\n", res2); + return -EADDRNOTAVAIL; } info->dev = &pdev->dev; @@ -699,7 +717,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev) spin_unlock_irq(&davinci_nand_lock); if (ret == -EBUSY) - goto err_ecc; + return ret; info->chip.ecc.calculate = nand_davinci_calculate_4bit; info->chip.ecc.correct = nand_davinci_correct_4bit; @@ -715,8 +733,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev) info->chip.ecc.strength = pdata->ecc_bits; break; default: - ret = -EINVAL; - goto err_ecc; + return -EINVAL; } info->chip.ecc.mode = ecc_mode; @@ -724,7 +741,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev) if (IS_ERR(info->clk)) { ret = PTR_ERR(info->clk); dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret); - goto err_clk; + return ret; } ret = clk_prepare_enable(info->clk); @@ -734,28 +751,6 @@ static int __init nand_davinci_probe(struct platform_device *pdev) goto err_clk_enable; } - /* - * Setup Async configuration register in case we did not boot from - * NAND and so bootloader did not bother to set it up. - */ - val = davinci_nand_readl(info, A1CR_OFFSET + info->core_chipsel * 4); - - /* Extended Wait is not valid and Select Strobe mode is not used */ - val &= ~(ACR_ASIZE_MASK | ACR_EW_MASK | ACR_SS_MASK); - if (info->chip.options & NAND_BUSWIDTH_16) - val |= 0x1; - - davinci_nand_writel(info, A1CR_OFFSET + info->core_chipsel * 4, val); - - ret = 0; - if (info->timing) - ret = davinci_aemif_setup_timing(info->timing, info->base, - info->core_chipsel); - if (ret < 0) { - dev_dbg(&pdev->dev, "NAND timing values setup fail\n"); - goto err_timing; - } - spin_lock_irq(&davinci_nand_lock); /* put CSxNAND into NAND mode */ @@ -769,7 +764,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev) ret = nand_scan_ident(&info->mtd, pdata->mask_chipsel ? 2 : 1, NULL); if (ret < 0) { dev_dbg(&pdev->dev, "no NAND chip(s) found\n"); - goto err_scan; + goto err; } /* Update ECC layout if needed ... for 1-bit HW ECC, the default @@ -783,7 +778,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev) if (!chunks || info->mtd.oobsize < 16) { dev_dbg(&pdev->dev, "too small\n"); ret = -EINVAL; - goto err_scan; + goto err; } /* For small page chips, preserve the manufacturer's @@ -814,7 +809,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev) dev_warn(&pdev->dev, "no 4-bit ECC support yet " "for 4KiB-page NAND\n"); ret = -EIO; - goto err_scan; + goto err; syndrome_done: info->chip.ecc.layout = &info->ecclayout; @@ -822,7 +817,7 @@ syndrome_done: ret = nand_scan_tail(&info->mtd); if (ret < 0) - goto err_scan; + goto err; if (pdata->parts) ret = mtd_device_parse_register(&info->mtd, NULL, NULL, @@ -835,7 +830,7 @@ syndrome_done: NULL, 0); } if (ret < 0) - goto err_scan; + goto err; val = davinci_nand_readl(info, NRCSR_OFFSET); dev_info(&pdev->dev, "controller rev. %d.%d\n", @@ -843,8 +838,7 @@ syndrome_done: return 0; -err_scan: -err_timing: +err: clk_disable_unprepare(info->clk); err_clk_enable: @@ -852,15 +846,10 @@ err_clk_enable: if (ecc_mode == NAND_ECC_HW_SYNDROME) ecc4_busy = false; spin_unlock_irq(&davinci_nand_lock); - -err_ecc: -err_clk: -err_ioremap: -err_nomem: return ret; } -static int __exit nand_davinci_remove(struct platform_device *pdev) +static int nand_davinci_remove(struct platform_device *pdev) { struct davinci_nand_info *info = platform_get_drvdata(pdev); @@ -877,7 +866,8 @@ static int __exit nand_davinci_remove(struct platform_device *pdev) } static struct platform_driver nand_davinci_driver = { - .remove = __exit_p(nand_davinci_remove), + .probe = nand_davinci_probe, + .remove = nand_davinci_remove, .driver = { .name = "davinci_nand", .owner = THIS_MODULE, @@ -886,7 +876,7 @@ static struct platform_driver nand_davinci_driver = { }; MODULE_ALIAS("platform:davinci_nand"); -module_platform_driver_probe(nand_davinci_driver, nand_davinci_probe); +module_platform_driver(nand_davinci_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Texas Instruments"); diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index 2ed2bb33a6e..9f2012a3e76 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -125,7 +125,6 @@ static void reset_buf(struct denali_nand_info *denali) static void write_byte_to_buf(struct denali_nand_info *denali, uint8_t byte) { - BUG_ON(denali->buf.tail >= sizeof(denali->buf.buf)); denali->buf.buf[denali->buf.tail++] = byte; } @@ -897,7 +896,7 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) /* this function examines buffers to see if they contain data that * indicate that the buffer is part of an erased region of flash. */ -bool is_erased(uint8_t *buf, int len) +static bool is_erased(uint8_t *buf, int len) { int i = 0; for (i = 0; i < len; i++) @@ -1234,7 +1233,7 @@ static int denali_waitfunc(struct mtd_info *mtd, struct nand_chip *chip) return status; } -static void denali_erase(struct mtd_info *mtd, int page) +static int denali_erase(struct mtd_info *mtd, int page) { struct denali_nand_info *denali = mtd_to_denali(mtd); @@ -1251,8 +1250,7 @@ static void denali_erase(struct mtd_info *mtd, int page) irq_status = wait_for_irq(denali, INTR_STATUS__ERASE_COMP | INTR_STATUS__ERASE_FAIL); - denali->status = (irq_status & INTR_STATUS__ERASE_FAIL) ? - NAND_STATUS_FAIL : PASS; + return (irq_status & INTR_STATUS__ERASE_FAIL) ? NAND_STATUS_FAIL : PASS; } static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col, @@ -1394,7 +1392,7 @@ static struct nand_bbt_descr bbt_mirror_descr = { }; /* initialize driver data structures */ -void denali_drv_init(struct denali_nand_info *denali) +static void denali_drv_init(struct denali_nand_info *denali) { denali->idx = 0; @@ -1429,20 +1427,12 @@ int denali_init(struct denali_nand_info *denali) } } - /* Is 32-bit DMA supported? */ - ret = dma_set_mask(denali->dev, DMA_BIT_MASK(32)); - if (ret) { - pr_err("Spectra: no usable DMA configuration\n"); - return ret; - } - denali->buf.dma_buf = dma_map_single(denali->dev, denali->buf.buf, - DENALI_BUF_SIZE, - DMA_BIDIRECTIONAL); + /* allocate a temporary buffer for nand_scan_ident() */ + denali->buf.buf = devm_kzalloc(denali->dev, PAGE_SIZE, + GFP_DMA | GFP_KERNEL); + if (!denali->buf.buf) + return -ENOMEM; - if (dma_mapping_error(denali->dev, denali->buf.dma_buf)) { - dev_err(denali->dev, "Spectra: failed to map DMA buffer\n"); - return -EIO; - } denali->mtd.dev.parent = denali->dev; denali_hw_init(denali); denali_drv_init(denali); @@ -1475,12 +1465,29 @@ int denali_init(struct denali_nand_info *denali) goto failed_req_irq; } - /* MTD supported page sizes vary by kernel. We validate our - * kernel supports the device here. - */ - if (denali->mtd.writesize > NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE) { - ret = -ENODEV; - pr_err("Spectra: device size not supported by this version of MTD."); + /* allocate the right size buffer now */ + devm_kfree(denali->dev, denali->buf.buf); + denali->buf.buf = devm_kzalloc(denali->dev, + denali->mtd.writesize + denali->mtd.oobsize, + GFP_KERNEL); + if (!denali->buf.buf) { + ret = -ENOMEM; + goto failed_req_irq; + } + + /* Is 32-bit DMA supported? */ + ret = dma_set_mask(denali->dev, DMA_BIT_MASK(32)); + if (ret) { + pr_err("Spectra: no usable DMA configuration\n"); + goto failed_req_irq; + } + + denali->buf.dma_buf = dma_map_single(denali->dev, denali->buf.buf, + denali->mtd.writesize + denali->mtd.oobsize, + DMA_BIDIRECTIONAL); + if (dma_mapping_error(denali->dev, denali->buf.dma_buf)) { + dev_err(denali->dev, "Spectra: failed to map DMA buffer\n"); + ret = -EIO; goto failed_req_irq; } @@ -1520,7 +1527,7 @@ int denali_init(struct denali_nand_info *denali) * so just let controller do 15bit ECC for MLC and 8bit ECC for * SLC if possible. * */ - if (denali->nand.cellinfo & NAND_CI_CELLTYPE_MSK && + if (!nand_is_slc(&denali->nand) && (denali->mtd.oobsize > (denali->bbtskipbytes + ECC_15BITS * (denali->mtd.writesize / ECC_SECTOR_SIZE)))) { @@ -1576,7 +1583,7 @@ int denali_init(struct denali_nand_info *denali) denali->nand.ecc.write_page_raw = denali_write_page_raw; denali->nand.ecc.read_oob = denali_read_oob; denali->nand.ecc.write_oob = denali_write_oob; - denali->nand.erase_cmd = denali_erase; + denali->nand.erase = denali_erase; if (nand_scan_tail(&denali->mtd)) { ret = -ENXIO; @@ -1602,7 +1609,8 @@ EXPORT_SYMBOL(denali_init); void denali_remove(struct denali_nand_info *denali) { denali_irq_cleanup(denali->irq, denali); - dma_unmap_single(denali->dev, denali->buf.dma_buf, DENALI_BUF_SIZE, + dma_unmap_single(denali->dev, denali->buf.dma_buf, + denali->mtd.writesize + denali->mtd.oobsize, DMA_BIDIRECTIONAL); } EXPORT_SYMBOL(denali_remove); diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h index cec5712862c..96681746242 100644 --- a/drivers/mtd/nand/denali.h +++ b/drivers/mtd/nand/denali.h @@ -455,12 +455,10 @@ #define ECC_SECTOR_SIZE 512 -#define DENALI_BUF_SIZE (NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE) - struct nand_buf { int head; int tail; - uint8_t buf[DENALI_BUF_SIZE]; + uint8_t *buf; dma_addr_t dma_buf; }; diff --git a/drivers/mtd/nand/denali_dt.c b/drivers/mtd/nand/denali_dt.c index 92530244e2c..35cb17f5780 100644 --- a/drivers/mtd/nand/denali_dt.c +++ b/drivers/mtd/nand/denali_dt.c @@ -30,24 +30,6 @@ struct denali_dt { struct clk *clk; }; -static void __iomem *request_and_map(struct device *dev, - const struct resource *res) -{ - void __iomem *ptr; - - if (!devm_request_mem_region(dev, res->start, resource_size(res), - "denali-dt")) { - dev_err(dev, "unable to request %s\n", res->name); - return NULL; - } - - ptr = devm_ioremap_nocache(dev, res->start, resource_size(res)); - if (!ptr) - dev_err(dev, "ioremap_nocache of %s failed!", res->name); - - return ptr; -} - static const struct of_device_id denali_nand_dt_ids[] = { { .compatible = "denali,denali-nand-dt" }, { /* sentinel */ } @@ -78,13 +60,6 @@ static int denali_dt_probe(struct platform_device *ofdev) return -ENOMEM; denali = &dt->denali; - denali_reg = platform_get_resource_byname(ofdev, IORESOURCE_MEM, "denali_reg"); - nand_data = platform_get_resource_byname(ofdev, IORESOURCE_MEM, "nand_data"); - if (!denali_reg || !nand_data) { - dev_err(&ofdev->dev, "resources not completely defined\n"); - return -EINVAL; - } - denali->platform = DT; denali->dev = &ofdev->dev; denali->irq = platform_get_irq(ofdev, 0); @@ -93,13 +68,15 @@ static int denali_dt_probe(struct platform_device *ofdev) return denali->irq; } - denali->flash_reg = request_and_map(&ofdev->dev, denali_reg); - if (!denali->flash_reg) - return -ENOMEM; + denali_reg = platform_get_resource_byname(ofdev, IORESOURCE_MEM, "denali_reg"); + denali->flash_reg = devm_ioremap_resource(&ofdev->dev, denali_reg); + if (IS_ERR(denali->flash_reg)) + return PTR_ERR(denali->flash_reg); - denali->flash_mem = request_and_map(&ofdev->dev, nand_data); - if (!denali->flash_mem) - return -ENOMEM; + nand_data = platform_get_resource_byname(ofdev, IORESOURCE_MEM, "nand_data"); + denali->flash_mem = devm_ioremap_resource(&ofdev->dev, nand_data); + if (IS_ERR(denali->flash_mem)) + return PTR_ERR(denali->flash_mem); if (!of_property_read_u32(ofdev->dev.of_node, "dma-mask", (u32 *)&denali_dma_mask)) { @@ -108,7 +85,7 @@ static int denali_dt_probe(struct platform_device *ofdev) denali->dev->dma_mask = NULL; } - dt->clk = clk_get(&ofdev->dev, NULL); + dt->clk = devm_clk_get(&ofdev->dev, NULL); if (IS_ERR(dt->clk)) { dev_err(&ofdev->dev, "no clk available\n"); return PTR_ERR(dt->clk); @@ -124,7 +101,6 @@ static int denali_dt_probe(struct platform_device *ofdev) out_disable_clk: clk_disable_unprepare(dt->clk); - clk_put(dt->clk); return ret; } @@ -135,7 +111,6 @@ static int denali_dt_remove(struct platform_device *ofdev) denali_remove(&dt->denali); clk_disable(dt->clk); - clk_put(dt->clk); return 0; } diff --git a/drivers/mtd/nand/denali_pci.c b/drivers/mtd/nand/denali_pci.c index e3e46623b2b..6e2f387b823 100644 --- a/drivers/mtd/nand/denali_pci.c +++ b/drivers/mtd/nand/denali_pci.c @@ -21,7 +21,7 @@ #define DENALI_NAND_NAME "denali-nand-pci" /* List of platforms this NAND controller has be integrated into */ -static DEFINE_PCI_DEVICE_TABLE(denali_pci_ids) = { +static const struct pci_device_id denali_pci_ids[] = { { PCI_VDEVICE(INTEL, 0x0701), INTEL_CE4100 }, { PCI_VDEVICE(INTEL, 0x0809), INTEL_MRST }, { /* end: all zeroes */ } @@ -119,7 +119,6 @@ static void denali_pci_remove(struct pci_dev *dev) iounmap(denali->flash_mem); pci_release_regions(dev); pci_disable_device(dev); - pci_set_drvdata(dev, NULL); kfree(denali); } @@ -132,7 +131,6 @@ static struct pci_driver denali_pci_driver = { static int denali_init_pci(void) { - pr_info("Spectra MTD driver built on %s @ %s\n", __DATE__, __TIME__); return pci_register_driver(&denali_pci_driver); } module_init(denali_init_pci); diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index eaa3c29ad86..f68a7bccecd 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -38,7 +38,7 @@ #define CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS 0 #endif -static unsigned long __initdata doc_locations[] = { +static unsigned long doc_locations[] __initdata = { #if defined (__alpha__) || defined(__i386__) || defined(__x86_64__) #ifdef CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH 0xfffc8000, 0xfffca000, 0xfffcc000, 0xfffce000, @@ -698,7 +698,8 @@ static void doc2001plus_command(struct mtd_info *mtd, unsigned command, int colu /* Serially input address */ if (column != -1) { /* Adjust columns for 16 bit buswidth */ - if (this->options & NAND_BUSWIDTH_16) + if (this->options & NAND_BUSWIDTH_16 && + !nand_opcode_8bits(command)) column >>= 1; WriteDOC(column, docptr, Mplus_FlashAddress); } @@ -1058,7 +1059,6 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partitio buf = kmalloc(mtd->writesize, GFP_KERNEL); if (!buf) { - printk(KERN_ERR "DiskOnChip mediaheader kmalloc failed!\n"); return 0; } if (!(numheaders = find_media_headers(mtd, buf, "ANAND", 1))) @@ -1166,7 +1166,6 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partiti buf = kmalloc(mtd->writesize, GFP_KERNEL); if (!buf) { - printk(KERN_ERR "DiskOnChip mediaheader kmalloc failed!\n"); return 0; } @@ -1440,10 +1439,13 @@ static int __init doc_probe(unsigned long physadr) int reg, len, numchips; int ret = 0; + if (!request_mem_region(physadr, DOC_IOREMAP_LEN, "DiskOnChip")) + return -EBUSY; virtadr = ioremap(physadr, DOC_IOREMAP_LEN); if (!virtadr) { printk(KERN_ERR "Diskonchip ioremap failed: 0x%x bytes at 0x%lx\n", DOC_IOREMAP_LEN, physadr); - return -EIO; + ret = -EIO; + goto error_ioremap; } /* It's not possible to cleanly detect the DiskOnChip - the @@ -1561,7 +1563,6 @@ static int __init doc_probe(unsigned long physadr) sizeof(struct nand_chip) + sizeof(struct doc_priv) + (2 * sizeof(struct nand_bbt_descr)); mtd = kzalloc(len, GFP_KERNEL); if (!mtd) { - printk(KERN_ERR "DiskOnChip kmalloc (%d bytes) failed!\n", len); ret = -ENOMEM; goto fail; } @@ -1629,6 +1630,10 @@ static int __init doc_probe(unsigned long physadr) WriteDOC(save_control, virtadr, DOCControl); fail: iounmap(virtadr); + +error_ioremap: + release_mem_region(physadr, DOC_IOREMAP_LEN); + return ret; } @@ -1645,6 +1650,7 @@ static void release_nanddoc(void) nextmtd = doc->nextdoc; nand_release(mtd); iounmap(doc->virtadr); + release_mem_region(doc->physadr, DOC_IOREMAP_LEN); kfree(mtd); } } diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c index 548db2389fa..ce24637e14f 100644 --- a/drivers/mtd/nand/docg4.c +++ b/drivers/mtd/nand/docg4.c @@ -44,6 +44,7 @@ #include <linux/mtd/nand.h> #include <linux/bch.h> #include <linux/bitrev.h> +#include <linux/jiffies.h> /* * In "reliable mode" consecutive 2k pages are used in parallel (in some @@ -269,7 +270,7 @@ static int poll_status(struct docg4_priv *doc) */ uint16_t flash_status; - unsigned int timeo; + unsigned long timeo; void __iomem *docptr = doc->virtadr; dev_dbg(doc->dev, "%s...\n", __func__); @@ -277,22 +278,18 @@ static int poll_status(struct docg4_priv *doc) /* hardware quirk requires reading twice initially */ flash_status = readw(docptr + DOC_FLASHCONTROL); - timeo = 1000; + timeo = jiffies + msecs_to_jiffies(200); /* generous timeout */ do { cpu_relax(); flash_status = readb(docptr + DOC_FLASHCONTROL); - } while (!(flash_status & DOC_CTRL_FLASHREADY) && --timeo); + } while (!(flash_status & DOC_CTRL_FLASHREADY) && + time_before(jiffies, timeo)); - - if (!timeo) { + if (unlikely(!(flash_status & DOC_CTRL_FLASHREADY))) { dev_err(doc->dev, "%s: timed out!\n", __func__); return NAND_STATUS_FAIL; } - if (unlikely(timeo < 50)) - dev_warn(doc->dev, "%s: nearly timed out; %d remaining\n", - __func__, timeo); - return 0; } @@ -494,7 +491,7 @@ static uint8_t docg4_read_byte(struct mtd_info *mtd) return status; } - dev_warn(doc->dev, "unexpectd call to read_byte()\n"); + dev_warn(doc->dev, "unexpected call to read_byte()\n"); return 0; } @@ -875,7 +872,7 @@ static int docg4_read_oob(struct mtd_info *mtd, struct nand_chip *nand, return 0; } -static void docg4_erase_block(struct mtd_info *mtd, int page) +static int docg4_erase_block(struct mtd_info *mtd, int page) { struct nand_chip *nand = mtd->priv; struct docg4_priv *doc = nand->priv; @@ -919,6 +916,8 @@ static void docg4_erase_block(struct mtd_info *mtd, int page) write_nop(docptr); poll_status(doc); write_nop(docptr); + + return nand->waitfunc(mtd, nand); } static int write_page(struct mtd_info *mtd, struct nand_chip *nand, @@ -1239,8 +1238,7 @@ static void __init init_mtd_structs(struct mtd_info *mtd) nand->block_markbad = docg4_block_markbad; nand->read_buf = docg4_read_buf; nand->write_buf = docg4_write_buf16; - nand->scan_bbt = nand_default_bbt; - nand->erase_cmd = docg4_erase_block; + nand->erase = docg4_erase_block; nand->ecc.read_page = docg4_read_page; nand->ecc.write_page = docg4_write_page; nand->ecc.read_page_raw = docg4_read_page_raw; diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 20657209a47..545a5c002f0 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -24,10 +24,10 @@ #include <linux/module.h> #include <linux/types.h> -#include <linux/init.h> #include <linux/kernel.h> #include <linux/string.h> #include <linux/ioport.h> +#include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/slab.h> @@ -650,8 +650,6 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd) chip->page_shift); dev_dbg(priv->dev, "fsl_elbc_init: nand->phys_erase_shift = %d\n", chip->phys_erase_shift); - dev_dbg(priv->dev, "fsl_elbc_init: nand->ecclayout = %p\n", - chip->ecclayout); dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.mode = %d\n", chip->ecc.mode); dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.steps = %d\n", @@ -725,6 +723,19 @@ static int fsl_elbc_write_page(struct mtd_info *mtd, struct nand_chip *chip, return 0; } +/* ECC will be calculated automatically, and errors will be detected in + * waitfunc. + */ +static int fsl_elbc_write_subpage(struct mtd_info *mtd, struct nand_chip *chip, + uint32_t offset, uint32_t data_len, + const uint8_t *buf, int oob_required) +{ + fsl_elbc_write_buf(mtd, buf, mtd->writesize); + fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize); + + return 0; +} + static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv) { struct fsl_lbc_ctrl *ctrl = priv->ctrl; @@ -763,6 +774,7 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv) chip->ecc.read_page = fsl_elbc_read_page; chip->ecc.write_page = fsl_elbc_write_page; + chip->ecc.write_subpage = fsl_elbc_write_subpage; /* If CS Base Register selects full hardware ECC then use it */ if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) == @@ -848,7 +860,6 @@ static int fsl_elbc_nand_probe(struct platform_device *pdev) if (!fsl_lbc_ctrl_dev->nand) { elbc_fcm_ctrl = kzalloc(sizeof(*elbc_fcm_ctrl), GFP_KERNEL); if (!elbc_fcm_ctrl) { - dev_err(dev, "failed to allocate memory\n"); mutex_unlock(&fsl_elbc_nand_mutex); ret = -ENOMEM; goto err; @@ -876,7 +887,7 @@ static int fsl_elbc_nand_probe(struct platform_device *pdev) goto err; } - priv->mtd.name = kasprintf(GFP_KERNEL, "%x.flash", (unsigned)res.start); + priv->mtd.name = kasprintf(GFP_KERNEL, "%llx.flash", (u64)res.start); if (!priv->mtd.name) { ret = -ENOMEM; goto err; diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index 317a771f158..2338124dd05 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -22,14 +22,14 @@ #include <linux/module.h> #include <linux/types.h> -#include <linux/init.h> #include <linux/kernel.h> +#include <linux/of_address.h> #include <linux/slab.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/mtd/nand_ecc.h> -#include <asm/fsl_ifc.h> +#include <linux/fsl_ifc.h> #define FSL_IFC_V1_1_0 0x01010000 #define ERR_BYTE 0xFF /* Value returned for read @@ -56,7 +56,7 @@ struct fsl_ifc_nand_ctrl { struct nand_hw_control controller; struct fsl_ifc_mtd *chips[FSL_IFC_BANK_COUNT]; - u8 __iomem *addr; /* Address of assigned IFC buffer */ + void __iomem *addr; /* Address of assigned IFC buffer */ unsigned int page; /* Last page written to / read from */ unsigned int read_bytes;/* Number of bytes read during command */ unsigned int column; /* Saved column from SEQIN */ @@ -135,6 +135,69 @@ static struct nand_ecclayout oob_4096_ecc8 = { .oobfree = { {2, 6}, {136, 82} }, }; +/* 8192-byte page size with 4-bit ECC */ +static struct nand_ecclayout oob_8192_ecc4 = { + .eccbytes = 128, + .eccpos = { + 8, 9, 10, 11, 12, 13, 14, 15, + 16, 17, 18, 19, 20, 21, 22, 23, + 24, 25, 26, 27, 28, 29, 30, 31, + 32, 33, 34, 35, 36, 37, 38, 39, + 40, 41, 42, 43, 44, 45, 46, 47, + 48, 49, 50, 51, 52, 53, 54, 55, + 56, 57, 58, 59, 60, 61, 62, 63, + 64, 65, 66, 67, 68, 69, 70, 71, + 72, 73, 74, 75, 76, 77, 78, 79, + 80, 81, 82, 83, 84, 85, 86, 87, + 88, 89, 90, 91, 92, 93, 94, 95, + 96, 97, 98, 99, 100, 101, 102, 103, + 104, 105, 106, 107, 108, 109, 110, 111, + 112, 113, 114, 115, 116, 117, 118, 119, + 120, 121, 122, 123, 124, 125, 126, 127, + 128, 129, 130, 131, 132, 133, 134, 135, + }, + .oobfree = { {2, 6}, {136, 208} }, +}; + +/* 8192-byte page size with 8-bit ECC -- requires 218-byte OOB */ +static struct nand_ecclayout oob_8192_ecc8 = { + .eccbytes = 256, + .eccpos = { + 8, 9, 10, 11, 12, 13, 14, 15, + 16, 17, 18, 19, 20, 21, 22, 23, + 24, 25, 26, 27, 28, 29, 30, 31, + 32, 33, 34, 35, 36, 37, 38, 39, + 40, 41, 42, 43, 44, 45, 46, 47, + 48, 49, 50, 51, 52, 53, 54, 55, + 56, 57, 58, 59, 60, 61, 62, 63, + 64, 65, 66, 67, 68, 69, 70, 71, + 72, 73, 74, 75, 76, 77, 78, 79, + 80, 81, 82, 83, 84, 85, 86, 87, + 88, 89, 90, 91, 92, 93, 94, 95, + 96, 97, 98, 99, 100, 101, 102, 103, + 104, 105, 106, 107, 108, 109, 110, 111, + 112, 113, 114, 115, 116, 117, 118, 119, + 120, 121, 122, 123, 124, 125, 126, 127, + 128, 129, 130, 131, 132, 133, 134, 135, + 136, 137, 138, 139, 140, 141, 142, 143, + 144, 145, 146, 147, 148, 149, 150, 151, + 152, 153, 154, 155, 156, 157, 158, 159, + 160, 161, 162, 163, 164, 165, 166, 167, + 168, 169, 170, 171, 172, 173, 174, 175, + 176, 177, 178, 179, 180, 181, 182, 183, + 184, 185, 186, 187, 188, 189, 190, 191, + 192, 193, 194, 195, 196, 197, 198, 199, + 200, 201, 202, 203, 204, 205, 206, 207, + 208, 209, 210, 211, 212, 213, 214, 215, + 216, 217, 218, 219, 220, 221, 222, 223, + 224, 225, 226, 227, 228, 229, 230, 231, + 232, 233, 234, 235, 236, 237, 238, 239, + 240, 241, 242, 243, 244, 245, 246, 247, + 248, 249, 250, 251, 252, 253, 254, 255, + 256, 257, 258, 259, 260, 261, 262, 263, + }, + .oobfree = { {2, 6}, {264, 80} }, +}; /* * Generic flash bbt descriptors @@ -441,20 +504,29 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, if (mtd->writesize > 512) { nand_fcr0 = (NAND_CMD_SEQIN << IFC_NAND_FCR0_CMD0_SHIFT) | - (NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD1_SHIFT); + (NAND_CMD_STATUS << IFC_NAND_FCR0_CMD1_SHIFT) | + (NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD2_SHIFT); iowrite32be( - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | - (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | - (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP3_SHIFT) | - (IFC_FIR_OP_CW1 << IFC_NAND_FIR0_OP4_SHIFT), - &ifc->ifc_nand.nand_fir0); + (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | + (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | + (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP3_SHIFT) | + (IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP4_SHIFT), + &ifc->ifc_nand.nand_fir0); + iowrite32be( + (IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT) | + (IFC_FIR_OP_RDSTAT << + IFC_NAND_FIR1_OP6_SHIFT) | + (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP7_SHIFT), + &ifc->ifc_nand.nand_fir1); } else { nand_fcr0 = ((NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD1_SHIFT) | (NAND_CMD_SEQIN << - IFC_NAND_FCR0_CMD2_SHIFT)); + IFC_NAND_FCR0_CMD2_SHIFT) | + (NAND_CMD_STATUS << + IFC_NAND_FCR0_CMD3_SHIFT)); iowrite32be( (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | @@ -463,8 +535,13 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP3_SHIFT) | (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP4_SHIFT), &ifc->ifc_nand.nand_fir0); - iowrite32be(IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT, - &ifc->ifc_nand.nand_fir1); + iowrite32be( + (IFC_FIR_OP_CMD1 << IFC_NAND_FIR1_OP5_SHIFT) | + (IFC_FIR_OP_CW3 << IFC_NAND_FIR1_OP6_SHIFT) | + (IFC_FIR_OP_RDSTAT << + IFC_NAND_FIR1_OP7_SHIFT) | + (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP8_SHIFT), + &ifc->ifc_nand.nand_fir1); if (column >= mtd->writesize) nand_fcr0 |= @@ -514,7 +591,10 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, * The chip always seems to report that it is * write-protected, even when it is not. */ - setbits8(ifc_nand_ctrl->addr, NAND_STATUS_WP); + if (chip->options & NAND_BUSWIDTH_16) + setbits16(ifc_nand_ctrl->addr, NAND_STATUS_WP); + else + setbits8(ifc_nand_ctrl->addr, NAND_STATUS_WP); return; case NAND_CMD_RESET: @@ -559,7 +639,7 @@ static void fsl_ifc_write_buf(struct mtd_info *mtd, const u8 *buf, int len) len = bufsize - ifc_nand_ctrl->index; } - memcpy_toio(&ifc_nand_ctrl->addr[ifc_nand_ctrl->index], buf, len); + memcpy_toio(ifc_nand_ctrl->addr + ifc_nand_ctrl->index, buf, len); ifc_nand_ctrl->index += len; } @@ -571,13 +651,16 @@ static uint8_t fsl_ifc_read_byte(struct mtd_info *mtd) { struct nand_chip *chip = mtd->priv; struct fsl_ifc_mtd *priv = chip->priv; + unsigned int offset; /* * If there are still bytes in the IFC buffer, then use the * next byte. */ - if (ifc_nand_ctrl->index < ifc_nand_ctrl->read_bytes) - return in_8(&ifc_nand_ctrl->addr[ifc_nand_ctrl->index++]); + if (ifc_nand_ctrl->index < ifc_nand_ctrl->read_bytes) { + offset = ifc_nand_ctrl->index++; + return in_8(ifc_nand_ctrl->addr + offset); + } dev_err(priv->dev, "%s: beyond end of buffer\n", __func__); return ERR_BYTE; @@ -598,8 +681,7 @@ static uint8_t fsl_ifc_read_byte16(struct mtd_info *mtd) * next byte. */ if (ifc_nand_ctrl->index < ifc_nand_ctrl->read_bytes) { - data = in_be16((uint16_t __iomem *)&ifc_nand_ctrl-> - addr[ifc_nand_ctrl->index]); + data = in_be16(ifc_nand_ctrl->addr + ifc_nand_ctrl->index); ifc_nand_ctrl->index += 2; return (uint8_t) data; } @@ -624,7 +706,7 @@ static void fsl_ifc_read_buf(struct mtd_info *mtd, u8 *buf, int len) avail = min((unsigned int)len, ifc_nand_ctrl->read_bytes - ifc_nand_ctrl->index); - memcpy_fromio(buf, &ifc_nand_ctrl->addr[ifc_nand_ctrl->index], avail); + memcpy_fromio(buf, ifc_nand_ctrl->addr + ifc_nand_ctrl->index, avail); ifc_nand_ctrl->index += avail; if (len > avail) @@ -718,8 +800,6 @@ static int fsl_ifc_chip_init_tail(struct mtd_info *mtd) chip->page_shift); dev_dbg(priv->dev, "%s: nand->phys_erase_shift = %d\n", __func__, chip->phys_erase_shift); - dev_dbg(priv->dev, "%s: nand->ecclayout = %p\n", __func__, - chip->ecclayout); dev_dbg(priv->dev, "%s: nand->ecc.mode = %d\n", __func__, chip->ecc.mode); dev_dbg(priv->dev, "%s: nand->ecc.steps = %d\n", __func__, @@ -872,11 +952,25 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv) } else { layout = &oob_4096_ecc8; chip->ecc.bytes = 16; + chip->ecc.strength = 8; } priv->bufnum_mask = 1; break; + case CSOR_NAND_PGS_8K: + if ((csor & CSOR_NAND_ECC_MODE_MASK) == + CSOR_NAND_ECC_MODE_4) { + layout = &oob_8192_ecc4; + } else { + layout = &oob_8192_ecc8; + chip->ecc.bytes = 16; + chip->ecc.strength = 8; + } + + priv->bufnum_mask = 0; + break; + default: dev_err(priv->dev, "bad csor %#x: bad page size\n", csor); return -ENODEV; @@ -907,7 +1001,6 @@ static int fsl_ifc_chip_remove(struct fsl_ifc_mtd *priv) iounmap(priv->vbase); ifc_nand_ctrl->chips[priv->bank] = NULL; - dev_set_drvdata(priv->dev, NULL); return 0; } @@ -971,7 +1064,6 @@ static int fsl_ifc_nand_probe(struct platform_device *dev) if (!fsl_ifc_ctrl_dev->nand) { ifc_nand_ctrl = kzalloc(sizeof(*ifc_nand_ctrl), GFP_KERNEL); if (!ifc_nand_ctrl) { - dev_err(&dev->dev, "failed to allocate memory\n"); mutex_unlock(&fsl_ifc_nand_mutex); return -ENOMEM; } @@ -1012,7 +1104,7 @@ static int fsl_ifc_nand_probe(struct platform_device *dev) IFC_NAND_EVTER_INTR_FTOERIR_EN | IFC_NAND_EVTER_INTR_WPERIR_EN, &ifc->ifc_nand.nand_evter_intr_en); - priv->mtd.name = kasprintf(GFP_KERNEL, "%x.flash", (unsigned)res.start); + priv->mtd.name = kasprintf(GFP_KERNEL, "%llx.flash", (u64)res.start); if (!priv->mtd.name) { ret = -ENOMEM; goto err; @@ -1082,25 +1174,7 @@ static struct platform_driver fsl_ifc_nand_driver = { .remove = fsl_ifc_nand_remove, }; -static int __init fsl_ifc_nand_init(void) -{ - int ret; - - ret = platform_driver_register(&fsl_ifc_nand_driver); - if (ret) - printk(KERN_ERR "fsl-ifc: Failed to register platform" - "driver\n"); - - return ret; -} - -static void __exit fsl_ifc_nand_exit(void) -{ - platform_driver_unregister(&fsl_ifc_nand_driver); -} - -module_init(fsl_ifc_nand_init); -module_exit(fsl_ifc_nand_exit); +module_platform_driver(fsl_ifc_nand_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Freescale"); diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c index 04e07252d74..4d203e84e8c 100644 --- a/drivers/mtd/nand/fsl_upm.c +++ b/drivers/mtd/nand/fsl_upm.c @@ -18,6 +18,7 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> #include <linux/mtd/mtd.h> +#include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/of_gpio.h> #include <linux/io.h> diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c index 3dc1a7564d8..1550692973d 100644 --- a/drivers/mtd/nand/fsmc_nand.c +++ b/drivers/mtd/nand/fsmc_nand.c @@ -573,8 +573,6 @@ static int dma_xfer(struct fsmc_nand_data *host, void *buffer, int len, dma_dev = chan->device; dma_addr = dma_map_single(dma_dev->dev, buffer, len, direction); - flags |= DMA_COMPL_SKIP_SRC_UNMAP | DMA_COMPL_SKIP_DEST_UNMAP; - if (direction == DMA_TO_DEVICE) { dma_src = dma_addr; dma_dst = host->data_pa; @@ -891,10 +889,8 @@ static int fsmc_nand_probe_config_dt(struct platform_device *pdev, pdata->nand_timings = devm_kzalloc(&pdev->dev, sizeof(*pdata->nand_timings), GFP_KERNEL); - if (!pdata->nand_timings) { - dev_err(&pdev->dev, "no memory for nand_timing\n"); + if (!pdata->nand_timings) return -ENOMEM; - } of_property_read_u8_array(np, "timings", (u8 *)pdata->nand_timings, sizeof(*pdata->nand_timings)); @@ -952,10 +948,8 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) /* Allocate memory for the device structure (and zero it) */ host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL); - if (!host) { - dev_err(&pdev->dev, "failed to allocate device structure\n"); + if (!host) return -ENOMEM; - } res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data"); host->data_va = devm_ioremap_resource(&pdev->dev, res); @@ -1110,8 +1104,8 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) host->ecc_place = &fsmc_ecc4_lp_place; break; default: - printk(KERN_WARNING "No oob scheme defined for " - "oobsize %d\n", mtd->oobsize); + dev_warn(&pdev->dev, "No oob scheme defined for oobsize %d\n", + mtd->oobsize); BUG(); } } else { @@ -1126,8 +1120,8 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) nand->ecc.layout = &fsmc_ecc1_128_layout; break; default: - printk(KERN_WARNING "No oob scheme defined for " - "oobsize %d\n", mtd->oobsize); + dev_warn(&pdev->dev, "No oob scheme defined for oobsize %d\n", + mtd->oobsize); BUG(); } } diff --git a/drivers/mtd/nand/gpio.c b/drivers/mtd/nand/gpio.c index e826f898241..117ce333fdd 100644 --- a/drivers/mtd/nand/gpio.c +++ b/drivers/mtd/nand/gpio.c @@ -18,7 +18,6 @@ #include <linux/kernel.h> #include <linux/err.h> -#include <linux/init.h> #include <linux/slab.h> #include <linux/module.h> #include <linux/platform_device.h> @@ -132,13 +131,17 @@ static int gpio_nand_get_config_of(const struct device *dev, static struct resource *gpio_nand_get_io_sync_of(struct platform_device *pdev) { - struct resource *r = devm_kzalloc(&pdev->dev, sizeof(*r), GFP_KERNEL); + struct resource *r; u64 addr; - if (!r || of_property_read_u64(pdev->dev.of_node, + if (of_property_read_u64(pdev->dev.of_node, "gpio-control-nand,io-sync-reg", &addr)) return NULL; + r = devm_kzalloc(&pdev->dev, sizeof(*r), GFP_KERNEL); + if (!r) + return NULL; + r->start = addr; r->end = r->start + 0x3; r->flags = IORESOURCE_MEM; @@ -211,10 +214,8 @@ static int gpio_nand_probe(struct platform_device *pdev) return -EINVAL; gpiomtd = devm_kzalloc(&pdev->dev, sizeof(*gpiomtd), GFP_KERNEL); - if (!gpiomtd) { - dev_err(&pdev->dev, "failed to create NAND MTD\n"); + if (!gpiomtd) return -ENOMEM; - } chip = &gpiomtd->nand_chip; diff --git a/drivers/mtd/nand/gpmi-nand/bch-regs.h b/drivers/mtd/nand/gpmi-nand/bch-regs.h index 588f5374047..05bb91f2f4c 100644 --- a/drivers/mtd/nand/gpmi-nand/bch-regs.h +++ b/drivers/mtd/nand/gpmi-nand/bch-regs.h @@ -54,7 +54,7 @@ #define MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0 11 #define MX6Q_BM_BCH_FLASH0LAYOUT0_ECC0 (0x1f << MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0) #define BF_BCH_FLASH0LAYOUT0_ECC0(v, x) \ - (GPMI_IS_MX6Q(x) \ + (GPMI_IS_MX6(x) \ ? (((v) << MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0) \ & MX6Q_BM_BCH_FLASH0LAYOUT0_ECC0) \ : (((v) << BP_BCH_FLASH0LAYOUT0_ECC0) \ @@ -65,7 +65,7 @@ #define MX6Q_BM_BCH_FLASH0LAYOUT0_GF_13_14 \ (0x1 << MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14) #define BF_BCH_FLASH0LAYOUT0_GF(v, x) \ - ((GPMI_IS_MX6Q(x) && ((v) == 14)) \ + ((GPMI_IS_MX6(x) && ((v) == 14)) \ ? (((1) << MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14) \ & MX6Q_BM_BCH_FLASH0LAYOUT0_GF_13_14) \ : 0 \ @@ -77,7 +77,7 @@ #define MX6Q_BM_BCH_FLASH0LAYOUT0_DATA0_SIZE \ (0x3ff << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE) #define BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(v, x) \ - (GPMI_IS_MX6Q(x) \ + (GPMI_IS_MX6(x) \ ? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT0_DATA0_SIZE) \ : ((v) & BM_BCH_FLASH0LAYOUT0_DATA0_SIZE) \ ) @@ -96,7 +96,7 @@ #define MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN 11 #define MX6Q_BM_BCH_FLASH0LAYOUT1_ECCN (0x1f << MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN) #define BF_BCH_FLASH0LAYOUT1_ECCN(v, x) \ - (GPMI_IS_MX6Q(x) \ + (GPMI_IS_MX6(x) \ ? (((v) << MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN) \ & MX6Q_BM_BCH_FLASH0LAYOUT1_ECCN) \ : (((v) << BP_BCH_FLASH0LAYOUT1_ECCN) \ @@ -107,7 +107,7 @@ #define MX6Q_BM_BCH_FLASH0LAYOUT1_GF_13_14 \ (0x1 << MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14) #define BF_BCH_FLASH0LAYOUT1_GF(v, x) \ - ((GPMI_IS_MX6Q(x) && ((v) == 14)) \ + ((GPMI_IS_MX6(x) && ((v) == 14)) \ ? (((1) << MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14) \ & MX6Q_BM_BCH_FLASH0LAYOUT1_GF_13_14) \ : 0 \ @@ -119,7 +119,7 @@ #define MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE \ (0x3ff << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE) #define BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(v, x) \ - (GPMI_IS_MX6Q(x) \ + (GPMI_IS_MX6(x) \ ? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE) \ : ((v) & BM_BCH_FLASH0LAYOUT1_DATAN_SIZE) \ ) diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c index 4f8857fa48a..87e658ce23e 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c @@ -20,6 +20,7 @@ */ #include <linux/delay.h> #include <linux/clk.h> +#include <linux/slab.h> #include "gpmi-nand.h" #include "gpmi-regs.h" @@ -187,6 +188,12 @@ int gpmi_init(struct gpmi_nand_data *this) /* Select BCH ECC. */ writel(BM_GPMI_CTRL1_BCH_MODE, r->gpmi_regs + HW_GPMI_CTRL1_SET); + /* + * Decouple the chip select from dma channel. We use dma0 for all + * the chips. + */ + writel(BM_GPMI_CTRL1_DECOUPLE_CS, r->gpmi_regs + HW_GPMI_CTRL1_SET); + gpmi_disable_clk(this); return 0; err_out: @@ -201,30 +208,41 @@ void gpmi_dump_info(struct gpmi_nand_data *this) u32 reg; int i; - pr_err("Show GPMI registers :\n"); + dev_err(this->dev, "Show GPMI registers :\n"); for (i = 0; i <= HW_GPMI_DEBUG / 0x10 + 1; i++) { reg = readl(r->gpmi_regs + i * 0x10); - pr_err("offset 0x%.3x : 0x%.8x\n", i * 0x10, reg); + dev_err(this->dev, "offset 0x%.3x : 0x%.8x\n", i * 0x10, reg); } /* start to print out the BCH info */ - pr_err("Show BCH registers :\n"); + dev_err(this->dev, "Show BCH registers :\n"); for (i = 0; i <= HW_BCH_VERSION / 0x10 + 1; i++) { reg = readl(r->bch_regs + i * 0x10); - pr_err("offset 0x%.3x : 0x%.8x\n", i * 0x10, reg); + dev_err(this->dev, "offset 0x%.3x : 0x%.8x\n", i * 0x10, reg); } - pr_err("BCH Geometry :\n"); - pr_err("GF length : %u\n", geo->gf_len); - pr_err("ECC Strength : %u\n", geo->ecc_strength); - pr_err("Page Size in Bytes : %u\n", geo->page_size); - pr_err("Metadata Size in Bytes : %u\n", geo->metadata_size); - pr_err("ECC Chunk Size in Bytes: %u\n", geo->ecc_chunk_size); - pr_err("ECC Chunk Count : %u\n", geo->ecc_chunk_count); - pr_err("Payload Size in Bytes : %u\n", geo->payload_size); - pr_err("Auxiliary Size in Bytes: %u\n", geo->auxiliary_size); - pr_err("Auxiliary Status Offset: %u\n", geo->auxiliary_status_offset); - pr_err("Block Mark Byte Offset : %u\n", geo->block_mark_byte_offset); - pr_err("Block Mark Bit Offset : %u\n", geo->block_mark_bit_offset); + dev_err(this->dev, "BCH Geometry :\n" + "GF length : %u\n" + "ECC Strength : %u\n" + "Page Size in Bytes : %u\n" + "Metadata Size in Bytes : %u\n" + "ECC Chunk Size in Bytes: %u\n" + "ECC Chunk Count : %u\n" + "Payload Size in Bytes : %u\n" + "Auxiliary Size in Bytes: %u\n" + "Auxiliary Status Offset: %u\n" + "Block Mark Byte Offset : %u\n" + "Block Mark Bit Offset : %u\n", + geo->gf_len, + geo->ecc_strength, + geo->page_size, + geo->metadata_size, + geo->ecc_chunk_size, + geo->ecc_chunk_count, + geo->payload_size, + geo->auxiliary_size, + geo->auxiliary_status_offset, + geo->block_mark_byte_offset, + geo->block_mark_bit_offset); } /* Configures the geometry for BCH. */ @@ -259,8 +277,8 @@ int bch_set_geometry(struct gpmi_nand_data *this) * chip, otherwise it will lock up. So we skip resetting BCH on the MX23. * On the other hand, the MX28 needs the reset, because one case has been * seen where the BCH produced ECC errors constantly after 10000 - * consecutive reboots. The latter case has not been seen on the MX23 yet, - * still we don't know if it could happen there as well. + * consecutive reboots. The latter case has not been seen on the MX23 + * yet, still we don't know if it could happen there as well. */ ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MX23(this)); if (ret) @@ -347,7 +365,7 @@ static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this, improved_timing_is_available = (target.tREA_in_ns >= 0) && (target.tRLOH_in_ns >= 0) && - (target.tRHOH_in_ns >= 0) ; + (target.tRHOH_in_ns >= 0); /* Inspect the clock. */ nfc->clock_frequency_in_hz = clk_get_rate(r->clock[0]); @@ -843,7 +861,7 @@ static void gpmi_compute_edo_timing(struct gpmi_nand_data *this, struct resources *r = &this->resources; unsigned long rate = clk_get_rate(r->clock[0]); int mode = this->timing_mode; - int dll_threshold = 16; /* in ns */ + int dll_threshold = this->devdata->max_chain_delay; unsigned long delay; unsigned long clk_period; int t_rea; @@ -868,9 +886,6 @@ static void gpmi_compute_edo_timing(struct gpmi_nand_data *this, /* [3] for GPMI_HW_GPMI_CTRL1 */ hw->wrn_dly_sel = BV_GPMI_CTRL1_WRN_DLY_SEL_NO_DELAY; - if (GPMI_IS_MX6Q(this)) - dll_threshold = 12; - /* * Enlarge 10 times for the numerator and denominator in {3}. * This make us to get more accurate result. @@ -905,10 +920,14 @@ static int enable_edo_mode(struct gpmi_nand_data *this, int mode) struct resources *r = &this->resources; struct nand_chip *nand = &this->nand; struct mtd_info *mtd = &this->mtd; - uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {}; + uint8_t *feature; unsigned long rate; int ret; + feature = kzalloc(ONFI_SUBFEATURE_PARAM_LEN, GFP_KERNEL); + if (!feature) + return -ENOMEM; + nand->select_chip(mtd, 0); /* [1] send SET FEATURE commond to NAND */ @@ -936,11 +955,13 @@ static int enable_edo_mode(struct gpmi_nand_data *this, int mode) this->flags |= GPMI_ASYNC_EDO_ENABLED; this->timing_mode = mode; + kfree(feature); dev_info(this->dev, "enable the asynchronous EDO mode %d\n", mode); return 0; err_out: nand->select_chip(mtd, -1); + kfree(feature); dev_err(this->dev, "mode:%d ,failed in set feature.\n", mode); return -EINVAL; } @@ -950,7 +971,7 @@ int gpmi_extra_init(struct gpmi_nand_data *this) struct nand_chip *chip = &this->nand; /* Enable the asynchronous EDO feature. */ - if (GPMI_IS_MX6Q(this) && chip->onfi_version) { + if (GPMI_IS_MX6(this) && chip->onfi_version) { int mode = onfi_get_async_timing_mode(chip); /* We only support the timing mode 4 and mode 5. */ @@ -980,7 +1001,7 @@ void gpmi_begin(struct gpmi_nand_data *this) /* Enable the clock. */ ret = gpmi_enable_clk(this); if (ret) { - pr_err("We failed in enable the clk\n"); + dev_err(this->dev, "We failed in enable the clk\n"); goto err_out; } @@ -997,7 +1018,7 @@ void gpmi_begin(struct gpmi_nand_data *this) /* [1] Set HW_GPMI_TIMING0 */ reg = BF_GPMI_TIMING0_ADDRESS_SETUP(hw.address_setup_in_cycles) | BF_GPMI_TIMING0_DATA_HOLD(hw.data_hold_in_cycles) | - BF_GPMI_TIMING0_DATA_SETUP(hw.data_setup_in_cycles) ; + BF_GPMI_TIMING0_DATA_SETUP(hw.data_setup_in_cycles); writel(reg, gpmi_regs + HW_GPMI_TIMING0); @@ -1072,12 +1093,19 @@ int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip) if (GPMI_IS_MX23(this)) { mask = MX23_BM_GPMI_DEBUG_READY0 << chip; reg = readl(r->gpmi_regs + HW_GPMI_DEBUG); - } else if (GPMI_IS_MX28(this) || GPMI_IS_MX6Q(this)) { + } else if (GPMI_IS_MX28(this) || GPMI_IS_MX6(this)) { + /* + * In the imx6, all the ready/busy pins are bound + * together. So we only need to check chip 0. + */ + if (GPMI_IS_MX6(this)) + chip = 0; + /* MX28 shares the same R/B register as MX6Q. */ mask = MX28_BF_GPMI_STAT_READY_BUSY(1 << chip); reg = readl(r->gpmi_regs + HW_GPMI_STAT); } else - pr_err("unknow arch.\n"); + dev_err(this->dev, "unknow arch.\n"); return reg & mask; } @@ -1108,10 +1136,8 @@ int gpmi_send_command(struct gpmi_nand_data *this) desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio, ARRAY_SIZE(pio), DMA_TRANS_NONE, 0); - if (!desc) { - pr_err("step 1 error\n"); - return -1; - } + if (!desc) + return -EINVAL; /* [2] send out the COMMAND + ADDRESS string stored in @buffer */ sgl = &this->cmd_sgl; @@ -1121,11 +1147,8 @@ int gpmi_send_command(struct gpmi_nand_data *this) desc = dmaengine_prep_slave_sg(channel, sgl, 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - - if (!desc) { - pr_err("step 2 error\n"); - return -1; - } + if (!desc) + return -EINVAL; /* [3] submit the DMA */ set_dma_type(this, DMA_FOR_COMMAND); @@ -1154,20 +1177,17 @@ int gpmi_send_data(struct gpmi_nand_data *this) pio[1] = 0; desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio, ARRAY_SIZE(pio), DMA_TRANS_NONE, 0); - if (!desc) { - pr_err("step 1 error\n"); - return -1; - } + if (!desc) + return -EINVAL; /* [2] send DMA request */ prepare_data_dma(this, DMA_TO_DEVICE); desc = dmaengine_prep_slave_sg(channel, &this->data_sgl, 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc) { - pr_err("step 2 error\n"); - return -1; - } + if (!desc) + return -EINVAL; + /* [3] submit the DMA */ set_dma_type(this, DMA_FOR_WRITE_DATA); return start_dma_without_bch_irq(this, desc); @@ -1191,20 +1211,16 @@ int gpmi_read_data(struct gpmi_nand_data *this) desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio, ARRAY_SIZE(pio), DMA_TRANS_NONE, 0); - if (!desc) { - pr_err("step 1 error\n"); - return -1; - } + if (!desc) + return -EINVAL; /* [2] : send DMA request */ prepare_data_dma(this, DMA_FROM_DEVICE); desc = dmaengine_prep_slave_sg(channel, &this->data_sgl, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc) { - pr_err("step 2 error\n"); - return -1; - } + if (!desc) + return -EINVAL; /* [3] : submit the DMA */ set_dma_type(this, DMA_FOR_READ_DATA); @@ -1249,10 +1265,9 @@ int gpmi_send_page(struct gpmi_nand_data *this, (struct scatterlist *)pio, ARRAY_SIZE(pio), DMA_TRANS_NONE, DMA_CTRL_ACK); - if (!desc) { - pr_err("step 2 error\n"); - return -1; - } + if (!desc) + return -EINVAL; + set_dma_type(this, DMA_FOR_WRITE_ECC_PAGE); return start_dma_with_bch_irq(this, desc); } @@ -1284,10 +1299,8 @@ int gpmi_read_page(struct gpmi_nand_data *this, desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio, 2, DMA_TRANS_NONE, 0); - if (!desc) { - pr_err("step 1 error\n"); - return -1; - } + if (!desc) + return -EINVAL; /* [2] Enable the BCH block and read. */ command_mode = BV_GPMI_CTRL0_COMMAND_MODE__READ; @@ -1314,10 +1327,8 @@ int gpmi_read_page(struct gpmi_nand_data *this, (struct scatterlist *)pio, ARRAY_SIZE(pio), DMA_TRANS_NONE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc) { - pr_err("step 2 error\n"); - return -1; - } + if (!desc) + return -EINVAL; /* [3] Disable the BCH block */ command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY; @@ -1335,10 +1346,8 @@ int gpmi_read_page(struct gpmi_nand_data *this, (struct scatterlist *)pio, 3, DMA_TRANS_NONE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc) { - pr_err("step 3 error\n"); - return -1; - } + if (!desc) + return -EINVAL; /* [4] submit the DMA */ set_dma_type(this, DMA_FOR_READ_ECC_PAGE); diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index 59ab0692f0b..f638cd8077c 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -18,9 +18,6 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - #include <linux/clk.h> #include <linux/slab.h> #include <linux/interrupt.h> @@ -30,6 +27,7 @@ #include <linux/of_device.h> #include <linux/of_mtd.h> #include "gpmi-nand.h" +#include "bch-regs.h" /* Resource names for the GPMI NAND driver. */ #define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME "gpmi-nand" @@ -45,13 +43,40 @@ static struct nand_bbt_descr gpmi_bbt_descr = { .pattern = scan_ff_pattern }; -/* We will use all the (page + OOB). */ +/* + * We may change the layout if we can get the ECC info from the datasheet, + * else we will use all the (page + OOB). + */ static struct nand_ecclayout gpmi_hw_ecclayout = { .eccbytes = 0, .eccpos = { 0, }, .oobfree = { {.offset = 0, .length = 0} } }; +static const struct gpmi_devdata gpmi_devdata_imx23 = { + .type = IS_MX23, + .bch_max_ecc_strength = 20, + .max_chain_delay = 16, +}; + +static const struct gpmi_devdata gpmi_devdata_imx28 = { + .type = IS_MX28, + .bch_max_ecc_strength = 20, + .max_chain_delay = 16, +}; + +static const struct gpmi_devdata gpmi_devdata_imx6q = { + .type = IS_MX6Q, + .bch_max_ecc_strength = 40, + .max_chain_delay = 12, +}; + +static const struct gpmi_devdata gpmi_devdata_imx6sx = { + .type = IS_MX6SX, + .bch_max_ecc_strength = 62, + .max_chain_delay = 12, +}; + static irqreturn_t bch_irq(int irq, void *cookie) { struct gpmi_nand_data *this = cookie; @@ -101,14 +126,8 @@ static inline bool gpmi_check_ecc(struct gpmi_nand_data *this) /* The mx23/mx28 only support the GF13. */ if (geo->gf_len == 14) return false; - - if (geo->ecc_strength > MXS_ECC_STRENGTH_MAX) - return false; - } else if (GPMI_IS_MX6Q(this)) { - if (geo->ecc_strength > MX6_ECC_STRENGTH_MAX) - return false; } - return true; + return geo->ecc_strength <= this->devdata->bch_max_ecc_strength; } /* @@ -269,8 +288,7 @@ static int legacy_set_geometry(struct gpmi_nand_data *this) "We can not support this nand chip." " Its required ecc strength(%d) is beyond our" " capability(%d).\n", geo->ecc_strength, - (GPMI_IS_MX6Q(this) ? MX6_ECC_STRENGTH_MAX - : MXS_ECC_STRENGTH_MAX)); + this->devdata->bch_max_ecc_strength); return -EINVAL; } @@ -349,14 +367,16 @@ static int legacy_set_geometry(struct gpmi_nand_data *this) int common_nfc_set_geometry(struct gpmi_nand_data *this) { - return set_geometry_by_ecc_info(this) ? 0 : legacy_set_geometry(this); + if (of_property_read_bool(this->dev->of_node, "fsl,use-minimum-ecc") + && set_geometry_by_ecc_info(this)) + return 0; + return legacy_set_geometry(this); } struct dma_chan *get_dma_chan(struct gpmi_nand_data *this) { - int chipnr = this->current_chip; - - return this->dma_chans[chipnr]; + /* We use the DMA channel 0 to access all the nand chips. */ + return this->dma_chans[0]; } /* Can we use the upper's buffer directly for DMA? */ @@ -365,25 +385,28 @@ void prepare_data_dma(struct gpmi_nand_data *this, enum dma_data_direction dr) struct scatterlist *sgl = &this->data_sgl; int ret; - this->direct_dma_map_ok = true; - /* first try to map the upper buffer directly */ - sg_init_one(sgl, this->upper_buf, this->upper_len); - ret = dma_map_sg(this->dev, sgl, 1, dr); - if (ret == 0) { - /* We have to use our own DMA buffer. */ - sg_init_one(sgl, this->data_buffer_dma, PAGE_SIZE); - - if (dr == DMA_TO_DEVICE) - memcpy(this->data_buffer_dma, this->upper_buf, - this->upper_len); - + if (virt_addr_valid(this->upper_buf) && + !object_is_on_stack(this->upper_buf)) { + sg_init_one(sgl, this->upper_buf, this->upper_len); ret = dma_map_sg(this->dev, sgl, 1, dr); if (ret == 0) - pr_err("DMA mapping failed.\n"); + goto map_fail; - this->direct_dma_map_ok = false; + this->direct_dma_map_ok = true; + return; } + +map_fail: + /* We have to use our own DMA buffer. */ + sg_init_one(sgl, this->data_buffer_dma, this->upper_len); + + if (dr == DMA_TO_DEVICE) + memcpy(this->data_buffer_dma, this->upper_buf, this->upper_len); + + dma_map_sg(this->dev, sgl, 1, dr); + + this->direct_dma_map_ok = false; } /* This will be called after the DMA operation is finished. */ @@ -392,8 +415,6 @@ static void dma_irq_callback(void *param) struct gpmi_nand_data *this = param; struct completion *dma_c = &this->dma_done; - complete(dma_c); - switch (this->dma_type) { case DMA_FOR_COMMAND: dma_unmap_sg(this->dev, &this->cmd_sgl, 1, DMA_TO_DEVICE); @@ -416,8 +437,10 @@ static void dma_irq_callback(void *param) break; default: - pr_err("in wrong DMA operation.\n"); + dev_err(this->dev, "in wrong DMA operation.\n"); } + + complete(dma_c); } int start_dma_without_bch_irq(struct gpmi_nand_data *this, @@ -436,7 +459,8 @@ int start_dma_without_bch_irq(struct gpmi_nand_data *this, /* Wait for the interrupt from the DMA block. */ err = wait_for_completion_timeout(dma_c, msecs_to_jiffies(1000)); if (!err) { - pr_err("DMA timeout, last DMA :%d\n", this->last_dma_type); + dev_err(this->dev, "DMA timeout, last DMA :%d\n", + this->last_dma_type); gpmi_dump_info(this); return -ETIMEDOUT; } @@ -465,7 +489,8 @@ int start_dma_with_bch_irq(struct gpmi_nand_data *this, /* Wait for the interrupt from the BCH block. */ err = wait_for_completion_timeout(bch_c, msecs_to_jiffies(1000)); if (!err) { - pr_err("BCH timeout, last DMA :%d\n", this->last_dma_type); + dev_err(this->dev, "BCH timeout, last DMA :%d\n", + this->last_dma_type); gpmi_dump_info(this); return -ETIMEDOUT; } @@ -481,70 +506,38 @@ static int acquire_register_block(struct gpmi_nand_data *this, void __iomem *p; r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res_name); - if (!r) { - pr_err("Can't get resource for %s\n", res_name); - return -ENODEV; - } - - p = ioremap(r->start, resource_size(r)); - if (!p) { - pr_err("Can't remap %s\n", res_name); - return -ENOMEM; - } + p = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(p)) + return PTR_ERR(p); if (!strcmp(res_name, GPMI_NAND_GPMI_REGS_ADDR_RES_NAME)) res->gpmi_regs = p; else if (!strcmp(res_name, GPMI_NAND_BCH_REGS_ADDR_RES_NAME)) res->bch_regs = p; else - pr_err("unknown resource name : %s\n", res_name); + dev_err(this->dev, "unknown resource name : %s\n", res_name); return 0; } -static void release_register_block(struct gpmi_nand_data *this) -{ - struct resources *res = &this->resources; - if (res->gpmi_regs) - iounmap(res->gpmi_regs); - if (res->bch_regs) - iounmap(res->bch_regs); - res->gpmi_regs = NULL; - res->bch_regs = NULL; -} - static int acquire_bch_irq(struct gpmi_nand_data *this, irq_handler_t irq_h) { struct platform_device *pdev = this->pdev; - struct resources *res = &this->resources; const char *res_name = GPMI_NAND_BCH_INTERRUPT_RES_NAME; struct resource *r; int err; r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, res_name); if (!r) { - pr_err("Can't get resource for %s\n", res_name); + dev_err(this->dev, "Can't get resource for %s\n", res_name); return -ENODEV; } - err = request_irq(r->start, irq_h, 0, res_name, this); - if (err) { - pr_err("Can't own %s\n", res_name); - return err; - } - - res->bch_low_interrupt = r->start; - res->bch_high_interrupt = r->end; - return 0; -} - -static void release_bch_irq(struct gpmi_nand_data *this) -{ - struct resources *res = &this->resources; - int i = res->bch_low_interrupt; + err = devm_request_irq(this->dev, r->start, irq_h, 0, res_name, this); + if (err) + dev_err(this->dev, "error requesting BCH IRQ\n"); - for (; i <= res->bch_high_interrupt; i++) - free_irq(i, this); + return err; } static void release_dma_channels(struct gpmi_nand_data *this) @@ -565,7 +558,7 @@ static int acquire_dma_channels(struct gpmi_nand_data *this) /* request dma channel */ dma_chan = dma_request_slave_channel(&pdev->dev, "rx-tx"); if (!dma_chan) { - pr_err("Failed to request DMA channel.\n"); + dev_err(this->dev, "Failed to request DMA channel.\n"); goto acquire_err; } @@ -577,21 +570,6 @@ acquire_err: return -EINVAL; } -static void gpmi_put_clks(struct gpmi_nand_data *this) -{ - struct resources *r = &this->resources; - struct clk *clk; - int i; - - for (i = 0; i < GPMI_CLK_MAX; i++) { - clk = r->clock[i]; - if (clk) { - clk_put(clk); - r->clock[i] = NULL; - } - } -} - static char *extra_clks_for_mx6q[GPMI_CLK_MAX] = { "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch", }; @@ -604,14 +582,14 @@ static int gpmi_get_clks(struct gpmi_nand_data *this) int err, i; /* The main clock is stored in the first. */ - r->clock[0] = clk_get(this->dev, "gpmi_io"); + r->clock[0] = devm_clk_get(this->dev, "gpmi_io"); if (IS_ERR(r->clock[0])) { err = PTR_ERR(r->clock[0]); goto err_clock; } /* Get extra clocks */ - if (GPMI_IS_MX6Q(this)) + if (GPMI_IS_MX6(this)) extra_clks = extra_clks_for_mx6q; if (!extra_clks) return 0; @@ -620,7 +598,7 @@ static int gpmi_get_clks(struct gpmi_nand_data *this) if (extra_clks[i - 1] == NULL) break; - clk = clk_get(this->dev, extra_clks[i - 1]); + clk = devm_clk_get(this->dev, extra_clks[i - 1]); if (IS_ERR(clk)) { err = PTR_ERR(clk); goto err_clock; @@ -629,9 +607,9 @@ static int gpmi_get_clks(struct gpmi_nand_data *this) r->clock[i] = clk; } - if (GPMI_IS_MX6Q(this)) + if (GPMI_IS_MX6(this)) /* - * Set the default value for the gpmi clock in mx6q: + * Set the default value for the gpmi clock. * * If you want to use the ONFI nand which is in the * Synchronous Mode, you should change the clock as you need. @@ -642,7 +620,6 @@ static int gpmi_get_clks(struct gpmi_nand_data *this) err_clock: dev_dbg(this->dev, "failed in finding the clocks.\n"); - gpmi_put_clks(this); return err; } @@ -664,7 +641,7 @@ static int acquire_resources(struct gpmi_nand_data *this) ret = acquire_dma_channels(this); if (ret) - goto exit_dma_channels; + goto exit_regs; ret = gpmi_get_clks(this); if (ret) @@ -673,18 +650,12 @@ static int acquire_resources(struct gpmi_nand_data *this) exit_clock: release_dma_channels(this); -exit_dma_channels: - release_bch_irq(this); exit_regs: - release_register_block(this); return ret; } static void release_resources(struct gpmi_nand_data *this) { - gpmi_put_clks(this); - release_register_block(this); - release_bch_irq(this); release_dma_channels(this); } @@ -730,8 +701,7 @@ static int read_page_prepare(struct gpmi_nand_data *this, length, DMA_FROM_DEVICE); if (dma_mapping_error(dev, dest_phys)) { if (alt_size < length) { - pr_err("%s, Alternate buffer is too small\n", - __func__); + dev_err(dev, "Alternate buffer is too small\n"); return -ENOMEM; } goto map_failed; @@ -781,8 +751,7 @@ static int send_page_prepare(struct gpmi_nand_data *this, DMA_TO_DEVICE); if (dma_mapping_error(dev, source_phys)) { if (alt_size < length) { - pr_err("%s, Alternate buffer is too small\n", - __func__); + dev_err(dev, "Alternate buffer is too small\n"); return -ENOMEM; } goto map_failed; @@ -835,14 +804,23 @@ static int gpmi_alloc_dma_buffer(struct gpmi_nand_data *this) { struct bch_geometry *geo = &this->bch_geometry; struct device *dev = this->dev; + struct mtd_info *mtd = &this->mtd; /* [1] Allocate a command buffer. PAGE_SIZE is enough. */ this->cmd_buffer = kzalloc(PAGE_SIZE, GFP_DMA | GFP_KERNEL); if (this->cmd_buffer == NULL) goto error_alloc; - /* [2] Allocate a read/write data buffer. PAGE_SIZE is enough. */ - this->data_buffer_dma = kzalloc(PAGE_SIZE, GFP_DMA | GFP_KERNEL); + /* + * [2] Allocate a read/write data buffer. + * The gpmi_alloc_dma_buffer can be called twice. + * We allocate a PAGE_SIZE length buffer if gpmi_alloc_dma_buffer + * is called before the nand_scan_ident; and we allocate a buffer + * of the real NAND page size when the gpmi_alloc_dma_buffer is + * called after the nand_scan_ident. + */ + this->data_buffer_dma = kzalloc(mtd->writesize ?: PAGE_SIZE, + GFP_DMA | GFP_KERNEL); if (this->data_buffer_dma == NULL) goto error_alloc; @@ -870,7 +848,6 @@ static int gpmi_alloc_dma_buffer(struct gpmi_nand_data *this) error_alloc: gpmi_free_dma_buffer(this); - pr_err("Error allocating DMA buffers!\n"); return -ENOMEM; } @@ -902,7 +879,8 @@ static void gpmi_cmd_ctrl(struct mtd_info *mtd, int data, unsigned int ctrl) ret = gpmi_send_command(this); if (ret) - pr_err("Chip: %u, Error %d\n", this->current_chip, ret); + dev_err(this->dev, "Chip: %u, Error %d\n", + this->current_chip, ret); this->command_length = 0; } @@ -933,7 +911,7 @@ static void gpmi_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) struct nand_chip *chip = mtd->priv; struct gpmi_nand_data *this = chip->priv; - pr_debug("len is %d\n", len); + dev_dbg(this->dev, "len is %d\n", len); this->upper_buf = buf; this->upper_len = len; @@ -945,7 +923,7 @@ static void gpmi_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) struct nand_chip *chip = mtd->priv; struct gpmi_nand_data *this = chip->priv; - pr_debug("len is %d\n", len); + dev_dbg(this->dev, "len is %d\n", len); this->upper_buf = (uint8_t *)buf; this->upper_len = len; @@ -1024,13 +1002,13 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip, unsigned int max_bitflips = 0; int ret; - pr_debug("page number is : %d\n", page); - ret = read_page_prepare(this, buf, mtd->writesize, + dev_dbg(this->dev, "page number is : %d\n", page); + ret = read_page_prepare(this, buf, nfc_geo->payload_size, this->payload_virt, this->payload_phys, nfc_geo->payload_size, &payload_virt, &payload_phys); if (ret) { - pr_err("Inadequate DMA buffer\n"); + dev_err(this->dev, "Inadequate DMA buffer\n"); ret = -ENOMEM; return ret; } @@ -1039,12 +1017,12 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip, /* go! */ ret = gpmi_read_page(this, payload_phys, auxiliary_phys); - read_page_end(this, buf, mtd->writesize, + read_page_end(this, buf, nfc_geo->payload_size, this->payload_virt, this->payload_phys, nfc_geo->payload_size, payload_virt, payload_phys); if (ret) { - pr_err("Error in ECC-based read: %d\n", ret); + dev_err(this->dev, "Error in ECC-based read: %d\n", ret); return ret; } @@ -1081,7 +1059,7 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip, chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0]; } - read_page_swap_end(this, buf, mtd->writesize, + read_page_swap_end(this, buf, nfc_geo->payload_size, this->payload_virt, this->payload_phys, nfc_geo->payload_size, payload_virt, payload_phys); @@ -1089,6 +1067,90 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip, return max_bitflips; } +/* Fake a virtual small page for the subpage read */ +static int gpmi_ecc_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, + uint32_t offs, uint32_t len, uint8_t *buf, int page) +{ + struct gpmi_nand_data *this = chip->priv; + void __iomem *bch_regs = this->resources.bch_regs; + struct bch_geometry old_geo = this->bch_geometry; + struct bch_geometry *geo = &this->bch_geometry; + int size = chip->ecc.size; /* ECC chunk size */ + int meta, n, page_size; + u32 r1_old, r2_old, r1_new, r2_new; + unsigned int max_bitflips; + int first, last, marker_pos; + int ecc_parity_size; + int col = 0; + + /* The size of ECC parity */ + ecc_parity_size = geo->gf_len * geo->ecc_strength / 8; + + /* Align it with the chunk size */ + first = offs / size; + last = (offs + len - 1) / size; + + /* + * Find the chunk which contains the Block Marker. If this chunk is + * in the range of [first, last], we have to read out the whole page. + * Why? since we had swapped the data at the position of Block Marker + * to the metadata which is bound with the chunk 0. + */ + marker_pos = geo->block_mark_byte_offset / size; + if (last >= marker_pos && first <= marker_pos) { + dev_dbg(this->dev, "page:%d, first:%d, last:%d, marker at:%d\n", + page, first, last, marker_pos); + return gpmi_ecc_read_page(mtd, chip, buf, 0, page); + } + + meta = geo->metadata_size; + if (first) { + col = meta + (size + ecc_parity_size) * first; + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, col, -1); + + meta = 0; + buf = buf + first * size; + } + + /* Save the old environment */ + r1_old = r1_new = readl(bch_regs + HW_BCH_FLASH0LAYOUT0); + r2_old = r2_new = readl(bch_regs + HW_BCH_FLASH0LAYOUT1); + + /* change the BCH registers and bch_geometry{} */ + n = last - first + 1; + page_size = meta + (size + ecc_parity_size) * n; + + r1_new &= ~(BM_BCH_FLASH0LAYOUT0_NBLOCKS | + BM_BCH_FLASH0LAYOUT0_META_SIZE); + r1_new |= BF_BCH_FLASH0LAYOUT0_NBLOCKS(n - 1) + | BF_BCH_FLASH0LAYOUT0_META_SIZE(meta); + writel(r1_new, bch_regs + HW_BCH_FLASH0LAYOUT0); + + r2_new &= ~BM_BCH_FLASH0LAYOUT1_PAGE_SIZE; + r2_new |= BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(page_size); + writel(r2_new, bch_regs + HW_BCH_FLASH0LAYOUT1); + + geo->ecc_chunk_count = n; + geo->payload_size = n * size; + geo->page_size = page_size; + geo->auxiliary_status_offset = ALIGN(meta, 4); + + dev_dbg(this->dev, "page:%d(%d:%d)%d, chunk:(%d:%d), BCH PG size:%d\n", + page, offs, len, col, first, n, page_size); + + /* Read the subpage now */ + this->swap_block_mark = false; + max_bitflips = gpmi_ecc_read_page(mtd, chip, buf, 0, page); + + /* Restore */ + writel(r1_old, bch_regs + HW_BCH_FLASH0LAYOUT0); + writel(r2_old, bch_regs + HW_BCH_FLASH0LAYOUT1); + this->bch_geometry = old_geo; + this->swap_block_mark = true; + + return max_bitflips; +} + static int gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required) { @@ -1100,7 +1162,7 @@ static int gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip, dma_addr_t auxiliary_phys; int ret; - pr_debug("ecc write page.\n"); + dev_dbg(this->dev, "ecc write page.\n"); if (this->swap_block_mark) { /* * If control arrives here, we're doing block mark swapping. @@ -1130,7 +1192,7 @@ static int gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip, nfc_geo->payload_size, &payload_virt, &payload_phys); if (ret) { - pr_err("Inadequate payload DMA buffer\n"); + dev_err(this->dev, "Inadequate payload DMA buffer\n"); return 0; } @@ -1140,7 +1202,7 @@ static int gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip, nfc_geo->auxiliary_size, &auxiliary_virt, &auxiliary_phys); if (ret) { - pr_err("Inadequate auxiliary DMA buffer\n"); + dev_err(this->dev, "Inadequate auxiliary DMA buffer\n"); goto exit_auxiliary; } } @@ -1148,7 +1210,7 @@ static int gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip, /* Ask the NFC. */ ret = gpmi_send_page(this, payload_phys, auxiliary_phys); if (ret) - pr_err("Error in ECC-based write: %d\n", ret); + dev_err(this->dev, "Error in ECC-based write: %d\n", ret); if (!this->swap_block_mark) { send_page_end(this, chip->oob_poi, mtd->oobsize, @@ -1238,7 +1300,7 @@ static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip, { struct gpmi_nand_data *this = chip->priv; - pr_debug("page number is %d\n", page); + dev_dbg(this->dev, "page number is %d\n", page); /* clear the OOB buffer */ memset(chip->oob_poi, ~0, mtd->oobsize); @@ -1263,14 +1325,22 @@ static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip, static int gpmi_ecc_write_oob(struct mtd_info *mtd, struct nand_chip *chip, int page) { - /* - * The BCH will use all the (page + oob). - * Our gpmi_hw_ecclayout can only prohibit the JFFS2 to write the oob. - * But it can not stop some ioctls such MEMWRITEOOB which uses - * MTD_OPS_PLACE_OOB. So We have to implement this function to prohibit - * these ioctls too. - */ - return -EPERM; + struct nand_oobfree *of = mtd->ecclayout->oobfree; + int status = 0; + + /* Do we have available oob area? */ + if (!of->length) + return -EPERM; + + if (!nand_is_slc(chip)) + return -EPERM; + + chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize + of->offset, page); + chip->write_buf(mtd, chip->oob_poi + of->offset, of->length); + chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); + + status = chip->waitfunc(mtd, chip); + return status & NAND_STATUS_FAIL ? -EIO : 0; } static int gpmi_block_markbad(struct mtd_info *mtd, loff_t ofs) @@ -1443,7 +1513,6 @@ static int mx23_write_transcription_stamp(struct gpmi_nand_data *this) /* Write the NCB fingerprint into the page buffer. */ memset(buffer, ~0, mtd->writesize); - memset(chip->oob_poi, ~0, mtd->oobsize); memcpy(buffer + 12, fingerprint, strlen(fingerprint)); /* Loop through the first search area, writing NCB fingerprints. */ @@ -1558,7 +1627,7 @@ static int gpmi_set_geometry(struct gpmi_nand_data *this) /* Set up the NFC geometry which is used by BCH. */ ret = bch_set_geometry(this); if (ret) { - pr_err("Error setting BCH geometry : %d\n", ret); + dev_err(this->dev, "Error setting BCH geometry : %d\n", ret); return ret; } @@ -1566,26 +1635,7 @@ static int gpmi_set_geometry(struct gpmi_nand_data *this) return gpmi_alloc_dma_buffer(this); } -static int gpmi_pre_bbt_scan(struct gpmi_nand_data *this) -{ - int ret; - - /* Set up swap_block_mark, must be set before the gpmi_set_geometry() */ - if (GPMI_IS_MX23(this)) - this->swap_block_mark = false; - else - this->swap_block_mark = true; - - /* Set up the medium geometry */ - ret = gpmi_set_geometry(this); - if (ret) - return ret; - - /* NAND boot init, depends on the gpmi_set_geometry(). */ - return nand_boot_init(this); -} - -static void gpmi_nfc_exit(struct gpmi_nand_data *this) +static void gpmi_nand_exit(struct gpmi_nand_data *this) { nand_release(&this->mtd); gpmi_free_dma_buffer(this); @@ -1599,8 +1649,11 @@ static int gpmi_init_last(struct gpmi_nand_data *this) struct bch_geometry *bch_geo = &this->bch_geometry; int ret; - /* Prepare for the BBT scan. */ - ret = gpmi_pre_bbt_scan(this); + /* Set up swap_block_mark, must be set before the gpmi_set_geometry() */ + this->swap_block_mark = !GPMI_IS_MX23(this); + + /* Set up the medium geometry */ + ret = gpmi_set_geometry(this); if (ret) return ret; @@ -1615,6 +1668,17 @@ static int gpmi_init_last(struct gpmi_nand_data *this) ecc->layout = &gpmi_hw_ecclayout; /* + * We only enable the subpage read when: + * (1) the chip is imx6, and + * (2) the size of the ECC parity is byte aligned. + */ + if (GPMI_IS_MX6(this) && + ((bch_geo->gf_len * bch_geo->ecc_strength) % 8) == 0) { + ecc->read_subpage = gpmi_ecc_read_subpage; + chip->options |= NAND_SUBPAGE_READ; + } + + /* * Can we enable the extra features? such as EDO or Sync mode. * * We do not check the return value now. That's means if we fail in @@ -1625,7 +1689,7 @@ static int gpmi_init_last(struct gpmi_nand_data *this) return 0; } -static int gpmi_nfc_init(struct gpmi_nand_data *this) +static int gpmi_nand_init(struct gpmi_nand_data *this) { struct mtd_info *mtd = &this->mtd; struct nand_chip *chip = &this->nand; @@ -1664,7 +1728,7 @@ static int gpmi_nfc_init(struct gpmi_nand_data *this) if (ret) goto err_out; - ret = nand_scan_ident(mtd, 1, NULL); + ret = nand_scan_ident(mtd, GPMI_IS_MX6(this) ? 2 : 1, NULL); if (ret) goto err_out; @@ -1672,10 +1736,16 @@ static int gpmi_nfc_init(struct gpmi_nand_data *this) if (ret) goto err_out; + chip->options |= NAND_SKIP_BBTSCAN; ret = nand_scan_tail(mtd); if (ret) goto err_out; + ret = nand_boot_init(this); + if (ret) + goto err_out; + chip->scan_bbt(mtd); + ppdata.of_node = this->pdev->dev.of_node; ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0); if (ret) @@ -1683,27 +1753,23 @@ static int gpmi_nfc_init(struct gpmi_nand_data *this) return 0; err_out: - gpmi_nfc_exit(this); + gpmi_nand_exit(this); return ret; } -static const struct platform_device_id gpmi_ids[] = { - { .name = "imx23-gpmi-nand", .driver_data = IS_MX23, }, - { .name = "imx28-gpmi-nand", .driver_data = IS_MX28, }, - { .name = "imx6q-gpmi-nand", .driver_data = IS_MX6Q, }, - {}, -}; - static const struct of_device_id gpmi_nand_id_table[] = { { .compatible = "fsl,imx23-gpmi-nand", - .data = (void *)&gpmi_ids[IS_MX23] + .data = (void *)&gpmi_devdata_imx23, }, { .compatible = "fsl,imx28-gpmi-nand", - .data = (void *)&gpmi_ids[IS_MX28] + .data = (void *)&gpmi_devdata_imx28, }, { .compatible = "fsl,imx6q-gpmi-nand", - .data = (void *)&gpmi_ids[IS_MX6Q] + .data = (void *)&gpmi_devdata_imx6q, + }, { + .compatible = "fsl,imx6sx-gpmi-nand", + .data = (void *)&gpmi_devdata_imx6sx, }, {} }; MODULE_DEVICE_TABLE(of, gpmi_nand_id_table); @@ -1714,20 +1780,18 @@ static int gpmi_nand_probe(struct platform_device *pdev) const struct of_device_id *of_id; int ret; + this = devm_kzalloc(&pdev->dev, sizeof(*this), GFP_KERNEL); + if (!this) + return -ENOMEM; + of_id = of_match_device(gpmi_nand_id_table, &pdev->dev); if (of_id) { - pdev->id_entry = of_id->data; + this->devdata = of_id->data; } else { - pr_err("Failed to find the right device id.\n"); + dev_err(&pdev->dev, "Failed to find the right device id.\n"); return -ENODEV; } - this = kzalloc(sizeof(*this), GFP_KERNEL); - if (!this) { - pr_err("Failed to allocate per-device memory\n"); - return -ENOMEM; - } - platform_set_drvdata(pdev, this); this->pdev = pdev; this->dev = &pdev->dev; @@ -1740,7 +1804,7 @@ static int gpmi_nand_probe(struct platform_device *pdev) if (ret) goto exit_nfc_init; - ret = gpmi_nfc_init(this); + ret = gpmi_nand_init(this); if (ret) goto exit_nfc_init; @@ -1752,7 +1816,6 @@ exit_nfc_init: release_resources(this); exit_acquire_resources: dev_err(this->dev, "driver registration failed: %d\n", ret); - kfree(this); return ret; } @@ -1761,9 +1824,8 @@ static int gpmi_nand_remove(struct platform_device *pdev) { struct gpmi_nand_data *this = platform_get_drvdata(pdev); - gpmi_nfc_exit(this); + gpmi_nand_exit(this); release_resources(this); - kfree(this); return 0; } @@ -1774,7 +1836,6 @@ static struct platform_driver gpmi_nand_driver = { }, .probe = gpmi_nand_probe, .remove = gpmi_nand_remove, - .id_table = gpmi_ids, }; module_platform_driver(gpmi_nand_driver); diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h index a7685e3a874..32c6ba49f98 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h @@ -26,8 +26,6 @@ struct resources { void __iomem *gpmi_regs; void __iomem *bch_regs; - unsigned int bch_low_interrupt; - unsigned int bch_high_interrupt; unsigned int dma_low_channel; unsigned int dma_high_channel; struct clk *clock[GPMI_CLK_MAX]; @@ -121,11 +119,25 @@ struct nand_timing { int8_t tRHOH_in_ns; }; +enum gpmi_type { + IS_MX23, + IS_MX28, + IS_MX6Q, + IS_MX6SX +}; + +struct gpmi_devdata { + enum gpmi_type type; + int bch_max_ecc_strength; + int max_chain_delay; /* See the async EDO mode */ +}; + struct gpmi_nand_data { /* flags */ #define GPMI_ASYNC_EDO_ENABLED (1 << 0) #define GPMI_TIMING_INIT_OK (1 << 1) int flags; + const struct gpmi_devdata *devdata; /* System Interface */ struct device *dev; @@ -283,15 +295,11 @@ extern int gpmi_read_page(struct gpmi_nand_data *, #define STATUS_ERASED 0xff #define STATUS_UNCORRECTABLE 0xfe -/* BCH's bit correction capability. */ -#define MXS_ECC_STRENGTH_MAX 20 /* mx23 and mx28 */ -#define MX6_ECC_STRENGTH_MAX 40 - -/* Use the platform_id to distinguish different Archs. */ -#define IS_MX23 0x0 -#define IS_MX28 0x1 -#define IS_MX6Q 0x2 -#define GPMI_IS_MX23(x) ((x)->pdev->id_entry->driver_data == IS_MX23) -#define GPMI_IS_MX28(x) ((x)->pdev->id_entry->driver_data == IS_MX28) -#define GPMI_IS_MX6Q(x) ((x)->pdev->id_entry->driver_data == IS_MX6Q) +/* Use the devdata to distinguish different Archs. */ +#define GPMI_IS_MX23(x) ((x)->devdata->type == IS_MX23) +#define GPMI_IS_MX28(x) ((x)->devdata->type == IS_MX28) +#define GPMI_IS_MX6Q(x) ((x)->devdata->type == IS_MX6Q) +#define GPMI_IS_MX6SX(x) ((x)->devdata->type == IS_MX6SX) + +#define GPMI_IS_MX6(x) (GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x)) #endif diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-regs.h b/drivers/mtd/nand/gpmi-nand/gpmi-regs.h index 53397cc290f..82114cdc833 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-regs.h +++ b/drivers/mtd/nand/gpmi-nand/gpmi-regs.h @@ -108,6 +108,9 @@ #define HW_GPMI_CTRL1_CLR 0x00000068 #define HW_GPMI_CTRL1_TOG 0x0000006c +#define BP_GPMI_CTRL1_DECOUPLE_CS 24 +#define BM_GPMI_CTRL1_DECOUPLE_CS (1 << BP_GPMI_CTRL1_DECOUPLE_CS) + #define BP_GPMI_CTRL1_WRN_DLY_SEL 22 #define BM_GPMI_CTRL1_WRN_DLY_SEL (0x3 << BP_GPMI_CTRL1_WRN_DLY_SEL) #define BF_GPMI_CTRL1_WRN_DLY_SEL(v) \ diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c index a264b888c66..a2c804de156 100644 --- a/drivers/mtd/nand/jz4740_nand.c +++ b/drivers/mtd/nand/jz4740_nand.c @@ -416,10 +416,8 @@ static int jz_nand_probe(struct platform_device *pdev) uint8_t nand_maf_id = 0, nand_dev_id = 0; nand = kzalloc(sizeof(*nand), GFP_KERNEL); - if (!nand) { - dev_err(&pdev->dev, "Failed to allocate device structure.\n"); + if (!nand) return -ENOMEM; - } ret = jz_nand_ioremap_resource(pdev, "mmio", &nand->mem, &nand->base); if (ret) diff --git a/drivers/mtd/nand/lpc32xx_mlc.c b/drivers/mtd/nand/lpc32xx_mlc.c index f4dd2a887ea..687478c9f09 100644 --- a/drivers/mtd/nand/lpc32xx_mlc.c +++ b/drivers/mtd/nand/lpc32xx_mlc.c @@ -539,20 +539,6 @@ static int lpc32xx_write_page_lowlevel(struct mtd_info *mtd, return 0; } -static int lpc32xx_write_page(struct mtd_info *mtd, struct nand_chip *chip, - uint32_t offset, int data_len, const uint8_t *buf, - int oob_required, int page, int cached, int raw) -{ - int res; - - chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page); - res = lpc32xx_write_page_lowlevel(mtd, chip, buf, oob_required); - chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); - lpc32xx_waitfunc(mtd, chip); - - return res; -} - static int lpc32xx_read_oob(struct mtd_info *mtd, struct nand_chip *chip, int page) { @@ -627,10 +613,8 @@ static struct lpc32xx_nand_cfg_mlc *lpc32xx_parse_dt(struct device *dev) struct device_node *np = dev->of_node; ncfg = devm_kzalloc(dev, sizeof(*ncfg), GFP_KERNEL); - if (!ncfg) { - dev_err(dev, "could not allocate memory for platform data\n"); + if (!ncfg) return NULL; - } of_property_read_u32(np, "nxp,tcea-delay", &ncfg->tcea_delay); of_property_read_u32(np, "nxp,busy-delay", &ncfg->busy_delay); @@ -666,10 +650,8 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) /* Allocate memory for the device structure (and zero it) */ host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL); - if (!host) { - dev_err(&pdev->dev, "failed to allocate device structure.\n"); + if (!host) return -ENOMEM; - } rc = platform_get_resource(pdev, IORESOURCE_MEM, 0); host->io_base = devm_ioremap_resource(&pdev->dev, rc); @@ -732,9 +714,9 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) nand_chip->ecc.write_oob = lpc32xx_write_oob; nand_chip->ecc.read_oob = lpc32xx_read_oob; nand_chip->ecc.strength = 4; - nand_chip->write_page = lpc32xx_write_page; nand_chip->waitfunc = lpc32xx_waitfunc; + nand_chip->options = NAND_NO_SUBPAGE_WRITE; nand_chip->bbt_options = NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB; nand_chip->bbt_td = &lpc32xx_nand_bbt; nand_chip->bbt_md = &lpc32xx_nand_bbt_mirror; @@ -764,14 +746,12 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) host->dma_buf = devm_kzalloc(&pdev->dev, mtd->writesize, GFP_KERNEL); if (!host->dma_buf) { - dev_err(&pdev->dev, "Error allocating dma_buf memory\n"); res = -ENOMEM; goto err_exit3; } host->dummy_buf = devm_kzalloc(&pdev->dev, mtd->writesize, GFP_KERNEL); if (!host->dummy_buf) { - dev_err(&pdev->dev, "Error allocating dummy_buf memory\n"); res = -ENOMEM; goto err_exit3; } @@ -905,7 +885,7 @@ static struct platform_driver lpc32xx_nand_driver = { .driver = { .name = DRV_NAME, .owner = THIS_MODULE, - .of_match_table = of_match_ptr(lpc32xx_nand_match), + .of_match_table = lpc32xx_nand_match, }, }; diff --git a/drivers/mtd/nand/lpc32xx_slc.c b/drivers/mtd/nand/lpc32xx_slc.c index add75709d41..53a6742e3da 100644 --- a/drivers/mtd/nand/lpc32xx_slc.c +++ b/drivers/mtd/nand/lpc32xx_slc.c @@ -725,10 +725,8 @@ static struct lpc32xx_nand_cfg_slc *lpc32xx_parse_dt(struct device *dev) struct device_node *np = dev->of_node; ncfg = devm_kzalloc(dev, sizeof(*ncfg), GFP_KERNEL); - if (!ncfg) { - dev_err(dev, "could not allocate memory for NAND config\n"); + if (!ncfg) return NULL; - } of_property_read_u32(np, "nxp,wdr-clks", &ncfg->wdr_clks); of_property_read_u32(np, "nxp,wwidth", &ncfg->wwidth); @@ -772,10 +770,8 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) /* Allocate memory for the device structure (and zero it) */ host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL); - if (!host) { - dev_err(&pdev->dev, "failed to allocate device structure\n"); + if (!host) return -ENOMEM; - } host->io_base_dma = rc->start; host->io_base = devm_ioremap_resource(&pdev->dev, rc); @@ -791,8 +787,8 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) } if (host->ncfg->wp_gpio == -EPROBE_DEFER) return -EPROBE_DEFER; - if (gpio_is_valid(host->ncfg->wp_gpio) && - gpio_request(host->ncfg->wp_gpio, "NAND WP")) { + if (gpio_is_valid(host->ncfg->wp_gpio) && devm_gpio_request(&pdev->dev, + host->ncfg->wp_gpio, "NAND WP")) { dev_err(&pdev->dev, "GPIO not available\n"); return -EBUSY; } @@ -808,7 +804,7 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) mtd->dev.parent = &pdev->dev; /* Get NAND clock */ - host->clk = clk_get(&pdev->dev, NULL); + host->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(host->clk)) { dev_err(&pdev->dev, "Clock failure\n"); res = -ENOENT; @@ -858,7 +854,6 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) host->data_buf = devm_kzalloc(&pdev->dev, host->dma_buf_len, GFP_KERNEL); if (host->data_buf == NULL) { - dev_err(&pdev->dev, "Error allocating memory\n"); res = -ENOMEM; goto err_exit2; } @@ -893,7 +888,6 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) /* Avoid extra scan if using BBT, setup BBT support */ if (host->ncfg->use_bbt) { - chip->options |= NAND_SKIP_BBTSCAN; chip->bbt_options |= NAND_BBT_USE_FLASH; /* @@ -915,13 +909,6 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) goto err_exit3; } - /* Standard layout in FLASH for bad block tables */ - if (host->ncfg->use_bbt) { - if (nand_default_bbt(mtd) < 0) - dev_err(&pdev->dev, - "Error initializing default bad block tables\n"); - } - mtd->name = "nxp_lpc3220_slc"; ppdata.of_node = pdev->dev.of_node; res = mtd_device_parse_register(mtd, NULL, &ppdata, host->ncfg->parts, @@ -935,10 +922,8 @@ err_exit3: dma_release_channel(host->dma_chan); err_exit2: clk_disable(host->clk); - clk_put(host->clk); err_exit1: lpc32xx_wp_enable(host); - gpio_free(host->ncfg->wp_gpio); return res; } @@ -961,9 +946,7 @@ static int lpc32xx_nand_remove(struct platform_device *pdev) writel(tmp, SLC_CTRL(host->io_base)); clk_disable(host->clk); - clk_put(host->clk); lpc32xx_wp_enable(host); - gpio_free(host->ncfg->wp_gpio); return 0; } @@ -1023,7 +1006,7 @@ static struct platform_driver lpc32xx_nand_driver = { .driver = { .name = LPC32XX_MODNAME, .owner = THIS_MODULE, - .of_match_table = of_match_ptr(lpc32xx_nand_match), + .of_match_table = lpc32xx_nand_match, }, }; diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c index 3c60a000b42..e78841a2dcc 100644 --- a/drivers/mtd/nand/mpc5121_nfc.c +++ b/drivers/mtd/nand/mpc5121_nfc.c @@ -30,13 +30,14 @@ #include <linux/gfp.h> #include <linux/delay.h> #include <linux/err.h> -#include <linux/init.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/of_address.h> #include <linux/of_device.h> +#include <linux/of_irq.h> #include <linux/of_platform.h> #include <asm/mpc5121.h> @@ -651,10 +652,8 @@ static int mpc5121_nfc_probe(struct platform_device *op) } prv = devm_kzalloc(dev, sizeof(*prv), GFP_KERNEL); - if (!prv) { - dev_err(dev, "Memory exhausted!\n"); + if (!prv) return -ENOMEM; - } mtd = &prv->mtd; chip = &prv->chip; @@ -729,7 +728,7 @@ static int mpc5121_nfc_probe(struct platform_device *op) of_node_put(rootnode); /* Enable NFC clock */ - clk = devm_clk_get(dev, "nfc_clk"); + clk = devm_clk_get(dev, "ipg"); if (IS_ERR(clk)) { dev_err(dev, "Unable to acquire NFC clock!\n"); retval = PTR_ERR(clk); @@ -784,7 +783,6 @@ static int mpc5121_nfc_probe(struct platform_device *op) /* Detect NAND chips */ if (nand_scan(mtd, be32_to_cpup(chips_no))) { dev_err(dev, "NAND Flash not found !\n"); - devm_free_irq(dev, prv->irq, mtd); retval = -ENXIO; goto error; } @@ -809,7 +807,6 @@ static int mpc5121_nfc_probe(struct platform_device *op) default: dev_err(dev, "Unsupported NAND flash!\n"); - devm_free_irq(dev, prv->irq, mtd); retval = -ENXIO; goto error; } @@ -820,7 +817,6 @@ static int mpc5121_nfc_probe(struct platform_device *op) retval = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0); if (retval) { dev_err(dev, "Error adding MTD device!\n"); - devm_free_irq(dev, prv->irq, mtd); goto error; } @@ -834,11 +830,8 @@ static int mpc5121_nfc_remove(struct platform_device *op) { struct device *dev = &op->dev; struct mtd_info *mtd = dev_get_drvdata(dev); - struct nand_chip *chip = mtd->priv; - struct mpc5121_nfc_prv *prv = chip->priv; nand_release(mtd); - devm_free_irq(dev, prv->irq, mtd); mpc5121_nfc_free(dev, mtd); return 0; diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index ce8242b6c3e..dba262bf766 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -32,6 +32,7 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/completion.h> +#include <linux/of.h> #include <linux/of_device.h> #include <linux/of_mtd.h> @@ -395,7 +396,7 @@ static void wait_op_done(struct mxc_nand_host *host, int useirq) if (useirq) { if (!host->devtype_data->check_int(host)) { - INIT_COMPLETION(host->op_completion); + reinit_completion(&host->op_completion); irq_control(host, 1); wait_for_completion(&host->op_completion); } @@ -676,7 +677,6 @@ static int mxc_nand_correct_data_v2_v3(struct mtd_info *mtd, u_char *dat, ecc_stat >>= 4; } while (--no_subpages); - mtd->ecc_stats.corrected += ret; pr_debug("%d Symbol Correctable RS-ECC Error\n", ret); return ret; @@ -1399,12 +1399,15 @@ static int mxcnd_probe(struct platform_device *pdev) int err = 0; /* Allocate memory for MTD device structure and private data */ - host = devm_kzalloc(&pdev->dev, sizeof(struct mxc_nand_host) + - NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE, GFP_KERNEL); + host = devm_kzalloc(&pdev->dev, sizeof(struct mxc_nand_host), + GFP_KERNEL); if (!host) return -ENOMEM; - host->data_buf = (uint8_t *)(host + 1); + /* allocate a temporary buffer for the nand_scan_ident() */ + host->data_buf = devm_kzalloc(&pdev->dev, PAGE_SIZE, GFP_KERNEL); + if (!host->data_buf) + return -ENOMEM; host->dev = &pdev->dev; /* structures must be linked */ @@ -1498,6 +1501,8 @@ static int mxcnd_probe(struct platform_device *pdev) init_completion(&host->op_completion); host->irq = platform_get_irq(pdev, 0); + if (host->irq < 0) + return host->irq; /* * Use host->devtype_data->irq_control() here instead of irq_control() @@ -1507,11 +1512,13 @@ static int mxcnd_probe(struct platform_device *pdev) host->devtype_data->irq_control(host, 0); err = devm_request_irq(&pdev->dev, host->irq, mxc_nfc_irq, - IRQF_DISABLED, DRIVER_NAME, host); + 0, DRIVER_NAME, host); if (err) return err; - clk_prepare_enable(host->clk); + err = clk_prepare_enable(host->clk); + if (err) + return err; host->clk_act = 1; /* @@ -1530,6 +1537,15 @@ static int mxcnd_probe(struct platform_device *pdev) goto escan; } + /* allocate the right size buffer now */ + devm_kfree(&pdev->dev, (void *)host->data_buf); + host->data_buf = devm_kzalloc(&pdev->dev, mtd->writesize + mtd->oobsize, + GFP_KERNEL); + if (!host->data_buf) { + err = -ENOMEM; + goto escan; + } + /* Call preset again, with correct writesize this time */ host->devtype_data->preset(mtd); @@ -1575,6 +1591,8 @@ static int mxcnd_remove(struct platform_device *pdev) struct mxc_nand_host *host = platform_get_drvdata(pdev); nand_release(&host->mtd); + if (host->clk_act) + clk_disable_unprepare(host->clk); return 0; } diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index d340b2f198c..4f3e80c68a2 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -29,12 +29,15 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/delay.h> #include <linux/errno.h> #include <linux/err.h> #include <linux/sched.h> #include <linux/slab.h> +#include <linux/mm.h> #include <linux/types.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> @@ -202,6 +205,51 @@ static void nand_select_chip(struct mtd_info *mtd, int chipnr) } /** + * nand_write_byte - [DEFAULT] write single byte to chip + * @mtd: MTD device structure + * @byte: value to write + * + * Default function to write a byte to I/O[7:0] + */ +static void nand_write_byte(struct mtd_info *mtd, uint8_t byte) +{ + struct nand_chip *chip = mtd->priv; + + chip->write_buf(mtd, &byte, 1); +} + +/** + * nand_write_byte16 - [DEFAULT] write single byte to a chip with width 16 + * @mtd: MTD device structure + * @byte: value to write + * + * Default function to write a byte to I/O[7:0] on a 16-bit wide chip. + */ +static void nand_write_byte16(struct mtd_info *mtd, uint8_t byte) +{ + struct nand_chip *chip = mtd->priv; + uint16_t word = byte; + + /* + * It's not entirely clear what should happen to I/O[15:8] when writing + * a byte. The ONFi spec (Revision 3.1; 2012-09-19, Section 2.16) reads: + * + * When the host supports a 16-bit bus width, only data is + * transferred at the 16-bit width. All address and command line + * transfers shall use only the lower 8-bits of the data bus. During + * command transfers, the host may place any value on the upper + * 8-bits of the data bus. During address transfers, the host shall + * set the upper 8-bits of the data bus to 00h. + * + * One user of the write_byte callback is nand_onfi_set_features. The + * four parameters are specified to be written to I/O[7:0], but this is + * neither an address nor a command transfer. Let's assume a 0 on the + * upper I/O lines is OK. + */ + chip->write_buf(mtd, (uint8_t *)&word, 2); +} + +/** * nand_write_buf - [DEFAULT] write buffer to chip * @mtd: MTD device structure * @buf: data buffer @@ -542,7 +590,8 @@ static void nand_command(struct mtd_info *mtd, unsigned int command, /* Serially input address */ if (column != -1) { /* Adjust columns for 16 bit buswidth */ - if (chip->options & NAND_BUSWIDTH_16) + if (chip->options & NAND_BUSWIDTH_16 && + !nand_opcode_8bits(command)) column >>= 1; chip->cmd_ctrl(mtd, column, ctrl); ctrl &= ~NAND_CTRL_CHANGE; @@ -633,7 +682,8 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command, /* Serially input address */ if (column != -1) { /* Adjust columns for 16 bit buswidth */ - if (chip->options & NAND_BUSWIDTH_16) + if (chip->options & NAND_BUSWIDTH_16 && + !nand_opcode_8bits(command)) column >>= 1; chip->cmd_ctrl(mtd, column, ctrl); ctrl &= ~NAND_CTRL_CHANGE; @@ -1113,9 +1163,11 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, * @data_offs: offset of requested data within the page * @readlen: data length * @bufpoi: buffer to store read data + * @page: page number to read */ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, - uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi) + uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi, + int page) { int start_step, end_step, num_steps; uint32_t *eccpos = chip->ecc.layout->eccpos; @@ -1123,13 +1175,14 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, int data_col_addr, i, gaps = 0; int datafrag_len, eccfrag_len, aligned_len, aligned_pos; int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1; - int index = 0; + int index; unsigned int max_bitflips = 0; /* Column address within the page aligned to ECC size (256bytes) */ start_step = data_offs / chip->ecc.size; end_step = (data_offs + readlen - 1) / chip->ecc.size; num_steps = end_step - start_step + 1; + index = start_step * chip->ecc.bytes; /* Data size aligned to ECC ecc.size */ datafrag_len = num_steps * chip->ecc.size; @@ -1152,8 +1205,7 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, * ecc.pos. Let's make sure that there are no gaps in ECC positions. */ for (i = 0; i < eccfrag_len - 1; i++) { - if (eccpos[i + start_step * chip->ecc.bytes] + 1 != - eccpos[i + start_step * chip->ecc.bytes + 1]) { + if (eccpos[i + index] + 1 != eccpos[i + index + 1]) { gaps = 1; break; } @@ -1166,8 +1218,6 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, * Send the command to read the particular ECC bytes take care * about buswidth alignment in read_buf. */ - index = start_step * chip->ecc.bytes; - aligned_pos = eccpos[index] & ~(busw - 1); aligned_len = eccfrag_len; if (eccpos[index] & (busw - 1)) @@ -1408,6 +1458,30 @@ static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob, } /** + * nand_setup_read_retry - [INTERN] Set the READ RETRY mode + * @mtd: MTD device structure + * @retry_mode: the retry mode to use + * + * Some vendors supply a special command to shift the Vt threshold, to be used + * when there are too many bitflips in a page (i.e., ECC error). After setting + * a new threshold, the host should retry reading the page. + */ +static int nand_setup_read_retry(struct mtd_info *mtd, int retry_mode) +{ + struct nand_chip *chip = mtd->priv; + + pr_debug("setting READ RETRY mode %d\n", retry_mode); + + if (retry_mode >= chip->read_retries) + return -EINVAL; + + if (!chip->setup_read_retry) + return -EOPNOTSUPP; + + return chip->setup_read_retry(mtd, retry_mode); +} + +/** * nand_do_read_ops - [INTERN] Read data with ECC * @mtd: MTD device structure * @from: offset to read from @@ -1420,7 +1494,6 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, { int chipnr, page, realpage, col, bytes, aligned, oob_required; struct nand_chip *chip = mtd->priv; - struct mtd_ecc_stats stats; int ret = 0; uint32_t readlen = ops->len; uint32_t oobreadlen = ops->ooblen; @@ -1428,9 +1501,10 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, mtd->oobavail : mtd->oobsize; uint8_t *bufpoi, *oob, *buf; + int use_bufpoi; unsigned int max_bitflips = 0; - - stats = mtd->ecc_stats; + int retry_mode = 0; + bool ecc_fail = false; chipnr = (int)(from >> chip->chip_shift); chip->select_chip(mtd, chipnr); @@ -1445,13 +1519,27 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, oob_required = oob ? 1 : 0; while (1) { + unsigned int ecc_failures = mtd->ecc_stats.failed; + bytes = min(mtd->writesize - col, readlen); aligned = (bytes == mtd->writesize); + if (!aligned) + use_bufpoi = 1; + else if (chip->options & NAND_USE_BOUNCE_BUFFER) + use_bufpoi = !virt_addr_valid(buf); + else + use_bufpoi = 0; + /* Is the current page in the buffer? */ if (realpage != chip->pagebuf || oob) { - bufpoi = aligned ? buf : chip->buffers->databuf; + bufpoi = use_bufpoi ? chip->buffers->databuf : buf; + + if (use_bufpoi && aligned) + pr_debug("%s: using read bounce buffer for buf@%p\n", + __func__, buf); +read_retry: chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page); /* @@ -1465,12 +1553,13 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, else if (!aligned && NAND_HAS_SUBPAGE_READ(chip) && !oob) ret = chip->ecc.read_subpage(mtd, chip, - col, bytes, bufpoi); + col, bytes, bufpoi, + page); else ret = chip->ecc.read_page(mtd, chip, bufpoi, oob_required, page); if (ret < 0) { - if (!aligned) + if (use_bufpoi) /* Invalidate page cache */ chip->pagebuf = -1; break; @@ -1479,9 +1568,9 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, max_bitflips = max_t(unsigned int, max_bitflips, ret); /* Transfer not aligned data */ - if (!aligned) { + if (use_bufpoi) { if (!NAND_HAS_SUBPAGE_READ(chip) && !oob && - !(mtd->ecc_stats.failed - stats.failed) && + !(mtd->ecc_stats.failed - ecc_failures) && (ops->mode != MTD_OPS_RAW)) { chip->pagebuf = realpage; chip->pagebuf_bitflips = ret; @@ -1492,8 +1581,6 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, memcpy(buf, chip->buffers->databuf + col, bytes); } - buf += bytes; - if (unlikely(oob)) { int toread = min(oobreadlen, max_oobsize); @@ -1511,6 +1598,25 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, else nand_wait_ready(mtd); } + + if (mtd->ecc_stats.failed - ecc_failures) { + if (retry_mode + 1 < chip->read_retries) { + retry_mode++; + ret = nand_setup_read_retry(mtd, + retry_mode); + if (ret < 0) + break; + + /* Reset failures; retry */ + mtd->ecc_stats.failed = ecc_failures; + goto read_retry; + } else { + /* No more retry modes; real failure */ + ecc_fail = true; + } + } + + buf += bytes; } else { memcpy(buf, chip->buffers->databuf + col, bytes); buf += bytes; @@ -1520,6 +1626,14 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, readlen -= bytes; + /* Reset to retry mode 0 */ + if (retry_mode) { + ret = nand_setup_read_retry(mtd, 0); + if (ret < 0) + break; + retry_mode = 0; + } + if (!readlen) break; @@ -1545,7 +1659,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, if (ret < 0) return ret; - if (mtd->ecc_stats.failed - stats.failed) + if (ecc_fail) return -EBADMSG; return max_bitflips; @@ -1902,7 +2016,7 @@ static int nand_write_page_raw_syndrome(struct mtd_info *mtd, oob += chip->ecc.prepad; } - chip->read_buf(mtd, oob, eccbytes); + chip->write_buf(mtd, oob, eccbytes); oob += eccbytes; if (chip->ecc.postpad) { @@ -2274,11 +2388,23 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to, int bytes = mtd->writesize; int cached = writelen > bytes && page != blockmask; uint8_t *wbuf = buf; + int use_bufpoi; + int part_pagewr = (column || writelen < (mtd->writesize - 1)); - /* Partial page write? */ - if (unlikely(column || writelen < (mtd->writesize - 1))) { + if (part_pagewr) + use_bufpoi = 1; + else if (chip->options & NAND_USE_BOUNCE_BUFFER) + use_bufpoi = !virt_addr_valid(buf); + else + use_bufpoi = 0; + + /* Partial page write?, or need to use bounce buffer */ + if (use_bufpoi) { + pr_debug("%s: using write bounce buffer for buf@%p\n", + __func__, buf); cached = 0; - bytes = min_t(int, bytes - column, (int) writelen); + if (part_pagewr) + bytes = min_t(int, bytes - column, writelen); chip->pagebuf = -1; memset(chip->buffers->databuf, 0xff, mtd->writesize); memcpy(&chip->buffers->databuf[column], buf, bytes); @@ -2516,18 +2642,20 @@ out: } /** - * single_erase_cmd - [GENERIC] NAND standard block erase command function + * single_erase - [GENERIC] NAND standard block erase command function * @mtd: MTD device structure * @page: the page address of the block which will be erased * - * Standard erase command for NAND chips. + * Standard erase command for NAND chips. Returns NAND status. */ -static void single_erase_cmd(struct mtd_info *mtd, int page) +static int single_erase(struct mtd_info *mtd, int page) { struct nand_chip *chip = mtd->priv; /* Send commands to erase a block */ chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page); chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1); + + return chip->waitfunc(mtd, chip); } /** @@ -2608,9 +2736,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, (page + pages_per_block)) chip->pagebuf = -1; - chip->erase_cmd(mtd, page & chip->pagemask); - - status = chip->waitfunc(mtd, chip); + status = chip->erase(mtd, page & chip->pagemask); /* * See if operation failed and additional status checks are @@ -2716,6 +2842,7 @@ static int nand_onfi_set_features(struct mtd_info *mtd, struct nand_chip *chip, int addr, uint8_t *subfeature_param) { int status; + int i; if (!chip->onfi_version || !(le16_to_cpu(chip->onfi_params.opt_cmd) @@ -2723,7 +2850,9 @@ static int nand_onfi_set_features(struct mtd_info *mtd, struct nand_chip *chip, return -EINVAL; chip->cmdfunc(mtd, NAND_CMD_SET_FEATURES, addr, -1); - chip->write_buf(mtd, subfeature_param, ONFI_SUBFEATURE_PARAM_LEN); + for (i = 0; i < ONFI_SUBFEATURE_PARAM_LEN; ++i) + chip->write_byte(mtd, subfeature_param[i]); + status = chip->waitfunc(mtd, chip); if (status & NAND_STATUS_FAIL) return -EIO; @@ -2740,6 +2869,8 @@ static int nand_onfi_set_features(struct mtd_info *mtd, struct nand_chip *chip, static int nand_onfi_get_features(struct mtd_info *mtd, struct nand_chip *chip, int addr, uint8_t *subfeature_param) { + int i; + if (!chip->onfi_version || !(le16_to_cpu(chip->onfi_params.opt_cmd) & ONFI_OPT_CMD_SET_GET_FEATURES)) @@ -2749,7 +2880,8 @@ static int nand_onfi_get_features(struct mtd_info *mtd, struct nand_chip *chip, memset(subfeature_param, 0, ONFI_SUBFEATURE_PARAM_LEN); chip->cmdfunc(mtd, NAND_CMD_GET_FEATURES, addr, -1); - chip->read_buf(mtd, subfeature_param, ONFI_SUBFEATURE_PARAM_LEN); + for (i = 0; i < ONFI_SUBFEATURE_PARAM_LEN; ++i) + *subfeature_param++ = chip->read_byte(mtd); return 0; } @@ -2812,6 +2944,8 @@ static void nand_set_defaults(struct nand_chip *chip, int busw) chip->block_markbad = nand_default_block_markbad; if (!chip->write_buf || chip->write_buf == nand_write_buf) chip->write_buf = busw ? nand_write_buf16 : nand_write_buf; + if (!chip->write_byte || chip->write_byte == nand_write_byte) + chip->write_byte = busw ? nand_write_byte16 : nand_write_byte; if (!chip->read_buf || chip->read_buf == nand_read_buf) chip->read_buf = busw ? nand_read_buf16 : nand_read_buf; if (!chip->scan_bbt) @@ -2912,12 +3046,13 @@ static int nand_flash_detect_ext_param_page(struct mtd_info *mtd, /* get the info we want. */ ecc = (struct onfi_ext_ecc_info *)cursor; - if (ecc->codeword_size) { - chip->ecc_strength_ds = ecc->ecc_bits; - chip->ecc_step_ds = 1 << ecc->codeword_size; + if (!ecc->codeword_size) { + pr_debug("Invalid codeword size\n"); + goto ext_out; } - pr_info("ONFI extended param page detected.\n"); + chip->ecc_strength_ds = ecc->ecc_bits; + chip->ecc_step_ds = 1 << ecc->codeword_size; ret = 0; ext_out: @@ -2925,6 +3060,30 @@ ext_out: return ret; } +static int nand_setup_read_retry_micron(struct mtd_info *mtd, int retry_mode) +{ + struct nand_chip *chip = mtd->priv; + uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {retry_mode}; + + return chip->onfi_set_features(mtd, chip, ONFI_FEATURE_ADDR_READ_RETRY, + feature); +} + +/* + * Configure chip properties from Micron vendor-specific ONFI table + */ +static void nand_onfi_detect_micron(struct nand_chip *chip, + struct nand_onfi_params *p) +{ + struct nand_onfi_vendor_micron *micron = (void *)p->vendor; + + if (le16_to_cpu(p->vendor_revision) < 1) + return; + + chip->read_retries = micron->read_retry_options; + chip->setup_read_retry = nand_setup_read_retry_micron; +} + /* * Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise. */ @@ -2932,14 +3091,9 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip, int *busw) { struct nand_onfi_params *p = &chip->onfi_params; - int i; + int i, j; int val; - /* ONFI need to be probed in 8 bits mode, and 16 bits should be selected with NAND_BUSWIDTH_AUTO */ - if (chip->options & NAND_BUSWIDTH_16) { - pr_err("Trying ONFI probe in 16 bits mode, aborting !\n"); - return 0; - } /* Try ONFI for unknown chip or LP */ chip->cmdfunc(mtd, NAND_CMD_READID, 0x20, -1); if (chip->read_byte(mtd) != 'O' || chip->read_byte(mtd) != 'N' || @@ -2948,16 +3102,18 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip, chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1); for (i = 0; i < 3; i++) { - chip->read_buf(mtd, (uint8_t *)p, sizeof(*p)); + for (j = 0; j < sizeof(*p); j++) + ((uint8_t *)p)[j] = chip->read_byte(mtd); if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 254) == le16_to_cpu(p->crc)) { - pr_info("ONFI param page %d valid\n", i); break; } } - if (i == 3) + if (i == 3) { + pr_err("Could not find valid ONFI parameter page; aborting\n"); return 0; + } /* Check version */ val = le16_to_cpu(p->revision); @@ -2973,7 +3129,7 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip, chip->onfi_version = 10; if (!chip->onfi_version) { - pr_info("%s: unsupported ONFI version: %d\n", __func__, val); + pr_info("unsupported ONFI version: %d\n", val); return 0; } @@ -2981,11 +3137,23 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip, sanitize_string(p->model, sizeof(p->model)); if (!mtd->name) mtd->name = p->model; + mtd->writesize = le32_to_cpu(p->byte_per_page); - mtd->erasesize = le32_to_cpu(p->pages_per_block) * mtd->writesize; + + /* + * pages_per_block and blocks_per_lun may not be a power-of-2 size + * (don't ask me who thought of this...). MTD assumes that these + * dimensions will be power-of-2, so just truncate the remaining area. + */ + mtd->erasesize = 1 << (fls(le32_to_cpu(p->pages_per_block)) - 1); + mtd->erasesize *= mtd->writesize; + mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page); - chip->chipsize = le32_to_cpu(p->blocks_per_lun); + + /* See erasesize comment */ + chip->chipsize = 1 << (fls(le32_to_cpu(p->blocks_per_lun)) - 1); chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count; + chip->bits_per_cell = p->bits_per_cell; if (onfi_feature(chip) & ONFI_FEATURE_16_BIT_BUS) *busw = NAND_BUSWIDTH_16; @@ -3009,10 +3177,95 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip, /* The Extended Parameter Page is supported since ONFI 2.1. */ if (nand_flash_detect_ext_param_page(mtd, chip, p)) - pr_info("Failed to detect the extended param page.\n"); + pr_warn("Failed to detect ONFI extended param page\n"); + } else { + pr_warn("Could not retrieve ONFI ECC requirements\n"); + } + + if (p->jedec_id == NAND_MFR_MICRON) + nand_onfi_detect_micron(chip, p); + + return 1; +} + +/* + * Check if the NAND chip is JEDEC compliant, returns 1 if it is, 0 otherwise. + */ +static int nand_flash_detect_jedec(struct mtd_info *mtd, struct nand_chip *chip, + int *busw) +{ + struct nand_jedec_params *p = &chip->jedec_params; + struct jedec_ecc_info *ecc; + int val; + int i, j; + + /* Try JEDEC for unknown chip or LP */ + chip->cmdfunc(mtd, NAND_CMD_READID, 0x40, -1); + if (chip->read_byte(mtd) != 'J' || chip->read_byte(mtd) != 'E' || + chip->read_byte(mtd) != 'D' || chip->read_byte(mtd) != 'E' || + chip->read_byte(mtd) != 'C') + return 0; + + chip->cmdfunc(mtd, NAND_CMD_PARAM, 0x40, -1); + for (i = 0; i < 3; i++) { + for (j = 0; j < sizeof(*p); j++) + ((uint8_t *)p)[j] = chip->read_byte(mtd); + + if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 510) == + le16_to_cpu(p->crc)) + break; + } + + if (i == 3) { + pr_err("Could not find valid JEDEC parameter page; aborting\n"); + return 0; + } + + /* Check version */ + val = le16_to_cpu(p->revision); + if (val & (1 << 2)) + chip->jedec_version = 10; + else if (val & (1 << 1)) + chip->jedec_version = 1; /* vendor specific version */ + + if (!chip->jedec_version) { + pr_info("unsupported JEDEC version: %d\n", val); + return 0; + } + + sanitize_string(p->manufacturer, sizeof(p->manufacturer)); + sanitize_string(p->model, sizeof(p->model)); + if (!mtd->name) + mtd->name = p->model; + + mtd->writesize = le32_to_cpu(p->byte_per_page); + + /* Please reference to the comment for nand_flash_detect_onfi. */ + mtd->erasesize = 1 << (fls(le32_to_cpu(p->pages_per_block)) - 1); + mtd->erasesize *= mtd->writesize; + + mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page); + + /* Please reference to the comment for nand_flash_detect_onfi. */ + chip->chipsize = 1 << (fls(le32_to_cpu(p->blocks_per_lun)) - 1); + chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count; + chip->bits_per_cell = p->bits_per_cell; + + if (jedec_feature(chip) & JEDEC_FEATURE_16_BIT_BUS) + *busw = NAND_BUSWIDTH_16; + else + *busw = 0; + + /* ECC info */ + ecc = &p->ecc_info[0]; + + if (ecc->codeword_size >= 9) { + chip->ecc_strength_ds = ecc->ecc_bits; + chip->ecc_step_ds = 1 << ecc->codeword_size; + } else { + pr_warn("Invalid codeword size\n"); } - pr_info("ONFI flash detected\n"); return 1; } @@ -3075,6 +3328,16 @@ static int nand_id_len(u8 *id_data, int arrlen) return arrlen; } +/* Extract the bits of per cell from the 3rd byte of the extended ID */ +static int nand_get_bits_per_cell(u8 cellinfo) +{ + int bits; + + bits = cellinfo & NAND_CI_CELLTYPE_MSK; + bits >>= NAND_CI_CELLTYPE_SHIFT; + return bits + 1; +} + /* * Many new NAND share similar device ID codes, which represent the size of the * chip. The rest of the parameters must be decoded according to generic or @@ -3085,7 +3348,7 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip, { int extid, id_len; /* The 3rd id byte holds MLC / multichip data */ - chip->cellinfo = id_data[2]; + chip->bits_per_cell = nand_get_bits_per_cell(id_data[2]); /* The 4th id byte is the important one */ extid = id_data[3]; @@ -3101,8 +3364,7 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip, * ID to decide what to do. */ if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG && - (chip->cellinfo & NAND_CI_CELLTYPE_MSK) && - id_data[5] != 0x00) { + !nand_is_slc(chip) && id_data[5] != 0x00) { /* Calc pagesize */ mtd->writesize = 2048 << (extid & 0x03); extid >>= 2; @@ -3124,9 +3386,12 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip, mtd->oobsize = 512; break; case 6: - default: /* Other cases are "reserved" (unknown) */ mtd->oobsize = 640; break; + case 7: + default: /* Other cases are "reserved" (unknown) */ + mtd->oobsize = 1024; + break; } extid >>= 2; /* Calc blocksize */ @@ -3134,7 +3399,7 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip, (((extid >> 1) & 0x04) | (extid & 0x03)); *busw = 0; } else if (id_len == 6 && id_data[0] == NAND_MFR_HYNIX && - (chip->cellinfo & NAND_CI_CELLTYPE_MSK)) { + !nand_is_slc(chip)) { unsigned int tmp; /* Calc pagesize */ @@ -3197,7 +3462,7 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip, * - ID byte 5, bit[7]: 1 -> BENAND, 0 -> raw SLC */ if (id_len >= 6 && id_data[0] == NAND_MFR_TOSHIBA && - !(chip->cellinfo & NAND_CI_CELLTYPE_MSK) && + nand_is_slc(chip) && (id_data[5] & 0x7) == 0x6 /* 24nm */ && !(id_data[4] & 0x80) /* !BENAND */) { mtd->oobsize = 32 * mtd->writesize >> 9; @@ -3222,6 +3487,9 @@ static void nand_decode_id(struct mtd_info *mtd, struct nand_chip *chip, mtd->oobsize = mtd->writesize / 32; *busw = type->options & NAND_BUSWIDTH_16; + /* All legacy ID NAND are small-page, SLC */ + chip->bits_per_cell = 1; + /* * Check for Spansion/AMD ID + repeating 5th, 6th byte since * some Spansion chips have erasesize that conflicts with size @@ -3258,11 +3526,11 @@ static void nand_decode_bbm_options(struct mtd_info *mtd, * Micron devices with 2KiB pages and on SLC Samsung, Hynix, Toshiba, * AMD/Spansion, and Macronix. All others scan only the first page. */ - if ((chip->cellinfo & NAND_CI_CELLTYPE_MSK) && + if (!nand_is_slc(chip) && (maf_id == NAND_MFR_SAMSUNG || maf_id == NAND_MFR_HYNIX)) chip->bbt_options |= NAND_BBT_SCANLASTPAGE; - else if ((!(chip->cellinfo & NAND_CI_CELLTYPE_MSK) && + else if ((nand_is_slc(chip) && (maf_id == NAND_MFR_SAMSUNG || maf_id == NAND_MFR_HYNIX || maf_id == NAND_MFR_TOSHIBA || @@ -3286,7 +3554,7 @@ static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip, mtd->erasesize = type->erasesize; mtd->oobsize = type->oobsize; - chip->cellinfo = id_data[2]; + chip->bits_per_cell = nand_get_bits_per_cell(id_data[2]); chip->chipsize = (uint64_t)type->chipsize << 20; chip->options |= type->options; chip->ecc_strength_ds = NAND_ECC_STRENGTH(type); @@ -3294,6 +3562,9 @@ static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip, *busw = type->options & NAND_BUSWIDTH_16; + if (!mtd->name) + mtd->name = type->name; + return true; } return false; @@ -3304,10 +3575,10 @@ static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip, */ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, struct nand_chip *chip, - int busw, int *maf_id, int *dev_id, struct nand_flash_dev *type) { + int busw; int i, maf_idx; u8 id_data[8]; @@ -3341,8 +3612,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, id_data[i] = chip->read_byte(mtd); if (id_data[0] != *maf_id || id_data[1] != *dev_id) { - pr_info("%s: second ID read did not match " - "%02x,%02x against %02x,%02x\n", __func__, + pr_info("second ID read did not match %02x,%02x against %02x,%02x\n", *maf_id, *dev_id, id_data[0], id_data[1]); return ERR_PTR(-ENODEV); } @@ -3361,9 +3631,13 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, chip->onfi_version = 0; if (!type->name || !type->pagesize) { - /* Check is chip is ONFI compliant */ + /* Check if the chip is ONFI compliant */ if (nand_flash_detect_onfi(mtd, chip, &busw)) goto ident_done; + + /* Check if the chip is JEDEC compliant */ + if (nand_flash_detect_jedec(mtd, chip, &busw)) + goto ident_done; } if (!type->name) @@ -3409,10 +3683,10 @@ ident_done: * Check, if buswidth is correct. Hardware drivers should set * chip correct! */ - pr_info("NAND device: Manufacturer ID:" - " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, - *dev_id, nand_manuf_ids[maf_idx].name, mtd->name); - pr_warn("NAND bus width %d instead %d bit\n", + pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n", + *maf_id, *dev_id); + pr_info("%s %s\n", nand_manuf_ids[maf_idx].name, mtd->name); + pr_warn("bus width %d instead %d bit\n", (chip->options & NAND_BUSWIDTH_16) ? 16 : 8, busw ? 16 : 8); return ERR_PTR(-EINVAL); @@ -3435,18 +3709,28 @@ ident_done: } chip->badblockbits = 8; - chip->erase_cmd = single_erase_cmd; + chip->erase = single_erase; /* Do not replace user supplied command function! */ if (mtd->writesize > 512 && chip->cmdfunc == nand_command) chip->cmdfunc = nand_command_lp; - pr_info("NAND device: Manufacturer ID: 0x%02x, Chip ID: 0x%02x (%s %s)," - " %dMiB, page size: %d, OOB size: %d\n", - *maf_id, *dev_id, nand_manuf_ids[maf_idx].name, - chip->onfi_version ? chip->onfi_params.model : type->name, - (int)(chip->chipsize >> 20), mtd->writesize, mtd->oobsize); + pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n", + *maf_id, *dev_id); + + if (chip->onfi_version) + pr_info("%s %s\n", nand_manuf_ids[maf_idx].name, + chip->onfi_params.model); + else if (chip->jedec_version) + pr_info("%s %s\n", nand_manuf_ids[maf_idx].name, + chip->jedec_params.model); + else + pr_info("%s %s\n", nand_manuf_ids[maf_idx].name, + type->name); + pr_info("%dMiB, %s, page size: %d, OOB size: %d\n", + (int)(chip->chipsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC", + mtd->writesize, mtd->oobsize); return type; } @@ -3464,18 +3748,16 @@ ident_done: int nand_scan_ident(struct mtd_info *mtd, int maxchips, struct nand_flash_dev *table) { - int i, busw, nand_maf_id, nand_dev_id; + int i, nand_maf_id, nand_dev_id; struct nand_chip *chip = mtd->priv; struct nand_flash_dev *type; - /* Get buswidth to select the correct functions */ - busw = chip->options & NAND_BUSWIDTH_16; /* Set the default functions */ - nand_set_defaults(chip, busw); + nand_set_defaults(chip, chip->options & NAND_BUSWIDTH_16); /* Read the flash type */ - type = nand_get_flash_type(mtd, chip, busw, - &nand_maf_id, &nand_dev_id, table); + type = nand_get_flash_type(mtd, chip, &nand_maf_id, + &nand_dev_id, table); if (IS_ERR(type)) { if (!(chip->options & NAND_SCAN_SILENT_NODEV)) @@ -3502,7 +3784,7 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips, chip->select_chip(mtd, -1); } if (i > 1) - pr_info("%d NAND chips detected\n", i); + pr_info("%d chips detected\n", i); /* Store the number of chips and calc total size for mtd */ chip->numchips = i; @@ -3512,6 +3794,39 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips, } EXPORT_SYMBOL(nand_scan_ident); +/* + * Check if the chip configuration meet the datasheet requirements. + + * If our configuration corrects A bits per B bytes and the minimum + * required correction level is X bits per Y bytes, then we must ensure + * both of the following are true: + * + * (1) A / B >= X / Y + * (2) A >= X + * + * Requirement (1) ensures we can correct for the required bitflip density. + * Requirement (2) ensures we can correct even when all bitflips are clumped + * in the same sector. + */ +static bool nand_ecc_strength_good(struct mtd_info *mtd) +{ + struct nand_chip *chip = mtd->priv; + struct nand_ecc_ctrl *ecc = &chip->ecc; + int corr, ds_corr; + + if (ecc->size == 0 || chip->ecc_step_ds == 0) + /* Not enough information */ + return true; + + /* + * We get the number of corrected bits per page to compare + * the correction density. + */ + corr = (mtd->writesize * ecc->strength) / ecc->size; + ds_corr = (mtd->writesize * chip->ecc_strength_ds) / chip->ecc_step_ds; + + return corr >= ds_corr && ecc->strength >= chip->ecc_strength_ds; +} /** * nand_scan_tail - [NAND Interface] Scan for the NAND device @@ -3525,15 +3840,27 @@ int nand_scan_tail(struct mtd_info *mtd) { int i; struct nand_chip *chip = mtd->priv; + struct nand_ecc_ctrl *ecc = &chip->ecc; + struct nand_buffers *nbuf; /* New bad blocks should be marked in OOB, flash-based BBT, or both */ BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) && !(chip->bbt_options & NAND_BBT_USE_FLASH)); - if (!(chip->options & NAND_OWN_BUFFERS)) - chip->buffers = kmalloc(sizeof(*chip->buffers), GFP_KERNEL); - if (!chip->buffers) - return -ENOMEM; + if (!(chip->options & NAND_OWN_BUFFERS)) { + nbuf = kzalloc(sizeof(*nbuf) + mtd->writesize + + mtd->oobsize * 3, GFP_KERNEL); + if (!nbuf) + return -ENOMEM; + nbuf->ecccalc = (uint8_t *)(nbuf + 1); + nbuf->ecccode = nbuf->ecccalc + mtd->oobsize; + nbuf->databuf = nbuf->ecccode + mtd->oobsize; + + chip->buffers = nbuf; + } else { + if (!chip->buffers) + return -ENOMEM; + } /* Set the internal oob buffer location, just after the page data */ chip->oob_poi = chip->buffers->databuf + mtd->writesize; @@ -3541,19 +3868,19 @@ int nand_scan_tail(struct mtd_info *mtd) /* * If no default placement scheme is given, select an appropriate one. */ - if (!chip->ecc.layout && (chip->ecc.mode != NAND_ECC_SOFT_BCH)) { + if (!ecc->layout && (ecc->mode != NAND_ECC_SOFT_BCH)) { switch (mtd->oobsize) { case 8: - chip->ecc.layout = &nand_oob_8; + ecc->layout = &nand_oob_8; break; case 16: - chip->ecc.layout = &nand_oob_16; + ecc->layout = &nand_oob_16; break; case 64: - chip->ecc.layout = &nand_oob_64; + ecc->layout = &nand_oob_64; break; case 128: - chip->ecc.layout = &nand_oob_128; + ecc->layout = &nand_oob_128; break; default: pr_warn("No oob scheme defined for oobsize %d\n", @@ -3570,64 +3897,62 @@ int nand_scan_tail(struct mtd_info *mtd) * selected and we have 256 byte pagesize fallback to software ECC */ - switch (chip->ecc.mode) { + switch (ecc->mode) { case NAND_ECC_HW_OOB_FIRST: /* Similar to NAND_ECC_HW, but a separate read_page handle */ - if (!chip->ecc.calculate || !chip->ecc.correct || - !chip->ecc.hwctl) { + if (!ecc->calculate || !ecc->correct || !ecc->hwctl) { pr_warn("No ECC functions supplied; " "hardware ECC not possible\n"); BUG(); } - if (!chip->ecc.read_page) - chip->ecc.read_page = nand_read_page_hwecc_oob_first; + if (!ecc->read_page) + ecc->read_page = nand_read_page_hwecc_oob_first; case NAND_ECC_HW: /* Use standard hwecc read page function? */ - if (!chip->ecc.read_page) - chip->ecc.read_page = nand_read_page_hwecc; - if (!chip->ecc.write_page) - chip->ecc.write_page = nand_write_page_hwecc; - if (!chip->ecc.read_page_raw) - chip->ecc.read_page_raw = nand_read_page_raw; - if (!chip->ecc.write_page_raw) - chip->ecc.write_page_raw = nand_write_page_raw; - if (!chip->ecc.read_oob) - chip->ecc.read_oob = nand_read_oob_std; - if (!chip->ecc.write_oob) - chip->ecc.write_oob = nand_write_oob_std; - if (!chip->ecc.read_subpage) - chip->ecc.read_subpage = nand_read_subpage; - if (!chip->ecc.write_subpage) - chip->ecc.write_subpage = nand_write_subpage_hwecc; + if (!ecc->read_page) + ecc->read_page = nand_read_page_hwecc; + if (!ecc->write_page) + ecc->write_page = nand_write_page_hwecc; + if (!ecc->read_page_raw) + ecc->read_page_raw = nand_read_page_raw; + if (!ecc->write_page_raw) + ecc->write_page_raw = nand_write_page_raw; + if (!ecc->read_oob) + ecc->read_oob = nand_read_oob_std; + if (!ecc->write_oob) + ecc->write_oob = nand_write_oob_std; + if (!ecc->read_subpage) + ecc->read_subpage = nand_read_subpage; + if (!ecc->write_subpage) + ecc->write_subpage = nand_write_subpage_hwecc; case NAND_ECC_HW_SYNDROME: - if ((!chip->ecc.calculate || !chip->ecc.correct || - !chip->ecc.hwctl) && - (!chip->ecc.read_page || - chip->ecc.read_page == nand_read_page_hwecc || - !chip->ecc.write_page || - chip->ecc.write_page == nand_write_page_hwecc)) { + if ((!ecc->calculate || !ecc->correct || !ecc->hwctl) && + (!ecc->read_page || + ecc->read_page == nand_read_page_hwecc || + !ecc->write_page || + ecc->write_page == nand_write_page_hwecc)) { pr_warn("No ECC functions supplied; " "hardware ECC not possible\n"); BUG(); } /* Use standard syndrome read/write page function? */ - if (!chip->ecc.read_page) - chip->ecc.read_page = nand_read_page_syndrome; - if (!chip->ecc.write_page) - chip->ecc.write_page = nand_write_page_syndrome; - if (!chip->ecc.read_page_raw) - chip->ecc.read_page_raw = nand_read_page_raw_syndrome; - if (!chip->ecc.write_page_raw) - chip->ecc.write_page_raw = nand_write_page_raw_syndrome; - if (!chip->ecc.read_oob) - chip->ecc.read_oob = nand_read_oob_syndrome; - if (!chip->ecc.write_oob) - chip->ecc.write_oob = nand_write_oob_syndrome; - - if (mtd->writesize >= chip->ecc.size) { - if (!chip->ecc.strength) { + if (!ecc->read_page) + ecc->read_page = nand_read_page_syndrome; + if (!ecc->write_page) + ecc->write_page = nand_write_page_syndrome; + if (!ecc->read_page_raw) + ecc->read_page_raw = nand_read_page_raw_syndrome; + if (!ecc->write_page_raw) + ecc->write_page_raw = nand_write_page_raw_syndrome; + if (!ecc->read_oob) + ecc->read_oob = nand_read_oob_syndrome; + if (!ecc->write_oob) + ecc->write_oob = nand_write_oob_syndrome; + + if (mtd->writesize >= ecc->size) { + if (!ecc->strength) { pr_warn("Driver must set ecc.strength when using hardware ECC\n"); BUG(); } @@ -3635,112 +3960,112 @@ int nand_scan_tail(struct mtd_info *mtd) } pr_warn("%d byte HW ECC not possible on " "%d byte page size, fallback to SW ECC\n", - chip->ecc.size, mtd->writesize); - chip->ecc.mode = NAND_ECC_SOFT; + ecc->size, mtd->writesize); + ecc->mode = NAND_ECC_SOFT; case NAND_ECC_SOFT: - chip->ecc.calculate = nand_calculate_ecc; - chip->ecc.correct = nand_correct_data; - chip->ecc.read_page = nand_read_page_swecc; - chip->ecc.read_subpage = nand_read_subpage; - chip->ecc.write_page = nand_write_page_swecc; - chip->ecc.read_page_raw = nand_read_page_raw; - chip->ecc.write_page_raw = nand_write_page_raw; - chip->ecc.read_oob = nand_read_oob_std; - chip->ecc.write_oob = nand_write_oob_std; - if (!chip->ecc.size) - chip->ecc.size = 256; - chip->ecc.bytes = 3; - chip->ecc.strength = 1; + ecc->calculate = nand_calculate_ecc; + ecc->correct = nand_correct_data; + ecc->read_page = nand_read_page_swecc; + ecc->read_subpage = nand_read_subpage; + ecc->write_page = nand_write_page_swecc; + ecc->read_page_raw = nand_read_page_raw; + ecc->write_page_raw = nand_write_page_raw; + ecc->read_oob = nand_read_oob_std; + ecc->write_oob = nand_write_oob_std; + if (!ecc->size) + ecc->size = 256; + ecc->bytes = 3; + ecc->strength = 1; break; case NAND_ECC_SOFT_BCH: if (!mtd_nand_has_bch()) { - pr_warn("CONFIG_MTD_ECC_BCH not enabled\n"); + pr_warn("CONFIG_MTD_NAND_ECC_BCH not enabled\n"); BUG(); } - chip->ecc.calculate = nand_bch_calculate_ecc; - chip->ecc.correct = nand_bch_correct_data; - chip->ecc.read_page = nand_read_page_swecc; - chip->ecc.read_subpage = nand_read_subpage; - chip->ecc.write_page = nand_write_page_swecc; - chip->ecc.read_page_raw = nand_read_page_raw; - chip->ecc.write_page_raw = nand_write_page_raw; - chip->ecc.read_oob = nand_read_oob_std; - chip->ecc.write_oob = nand_write_oob_std; + ecc->calculate = nand_bch_calculate_ecc; + ecc->correct = nand_bch_correct_data; + ecc->read_page = nand_read_page_swecc; + ecc->read_subpage = nand_read_subpage; + ecc->write_page = nand_write_page_swecc; + ecc->read_page_raw = nand_read_page_raw; + ecc->write_page_raw = nand_write_page_raw; + ecc->read_oob = nand_read_oob_std; + ecc->write_oob = nand_write_oob_std; /* * Board driver should supply ecc.size and ecc.bytes values to * select how many bits are correctable; see nand_bch_init() * for details. Otherwise, default to 4 bits for large page * devices. */ - if (!chip->ecc.size && (mtd->oobsize >= 64)) { - chip->ecc.size = 512; - chip->ecc.bytes = 7; + if (!ecc->size && (mtd->oobsize >= 64)) { + ecc->size = 512; + ecc->bytes = 7; } - chip->ecc.priv = nand_bch_init(mtd, - chip->ecc.size, - chip->ecc.bytes, - &chip->ecc.layout); - if (!chip->ecc.priv) { + ecc->priv = nand_bch_init(mtd, ecc->size, ecc->bytes, + &ecc->layout); + if (!ecc->priv) { pr_warn("BCH ECC initialization failed!\n"); BUG(); } - chip->ecc.strength = - chip->ecc.bytes * 8 / fls(8 * chip->ecc.size); + ecc->strength = ecc->bytes * 8 / fls(8 * ecc->size); break; case NAND_ECC_NONE: pr_warn("NAND_ECC_NONE selected by board driver. " "This is not recommended!\n"); - chip->ecc.read_page = nand_read_page_raw; - chip->ecc.write_page = nand_write_page_raw; - chip->ecc.read_oob = nand_read_oob_std; - chip->ecc.read_page_raw = nand_read_page_raw; - chip->ecc.write_page_raw = nand_write_page_raw; - chip->ecc.write_oob = nand_write_oob_std; - chip->ecc.size = mtd->writesize; - chip->ecc.bytes = 0; - chip->ecc.strength = 0; + ecc->read_page = nand_read_page_raw; + ecc->write_page = nand_write_page_raw; + ecc->read_oob = nand_read_oob_std; + ecc->read_page_raw = nand_read_page_raw; + ecc->write_page_raw = nand_write_page_raw; + ecc->write_oob = nand_write_oob_std; + ecc->size = mtd->writesize; + ecc->bytes = 0; + ecc->strength = 0; break; default: - pr_warn("Invalid NAND_ECC_MODE %d\n", chip->ecc.mode); + pr_warn("Invalid NAND_ECC_MODE %d\n", ecc->mode); BUG(); } /* For many systems, the standard OOB write also works for raw */ - if (!chip->ecc.read_oob_raw) - chip->ecc.read_oob_raw = chip->ecc.read_oob; - if (!chip->ecc.write_oob_raw) - chip->ecc.write_oob_raw = chip->ecc.write_oob; + if (!ecc->read_oob_raw) + ecc->read_oob_raw = ecc->read_oob; + if (!ecc->write_oob_raw) + ecc->write_oob_raw = ecc->write_oob; /* * The number of bytes available for a client to place data into * the out of band area. */ - chip->ecc.layout->oobavail = 0; - for (i = 0; chip->ecc.layout->oobfree[i].length - && i < ARRAY_SIZE(chip->ecc.layout->oobfree); i++) - chip->ecc.layout->oobavail += - chip->ecc.layout->oobfree[i].length; - mtd->oobavail = chip->ecc.layout->oobavail; + ecc->layout->oobavail = 0; + for (i = 0; ecc->layout->oobfree[i].length + && i < ARRAY_SIZE(ecc->layout->oobfree); i++) + ecc->layout->oobavail += ecc->layout->oobfree[i].length; + mtd->oobavail = ecc->layout->oobavail; + + /* ECC sanity check: warn if it's too weak */ + if (!nand_ecc_strength_good(mtd)) + pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n", + mtd->name); /* * Set the number of read / write steps for one page depending on ECC * mode. */ - chip->ecc.steps = mtd->writesize / chip->ecc.size; - if (chip->ecc.steps * chip->ecc.size != mtd->writesize) { + ecc->steps = mtd->writesize / ecc->size; + if (ecc->steps * ecc->size != mtd->writesize) { pr_warn("Invalid ECC parameters\n"); BUG(); } - chip->ecc.total = chip->ecc.steps * chip->ecc.bytes; + ecc->total = ecc->steps * ecc->bytes; /* Allow subpage writes up to ecc.steps. Not possible for MLC flash */ - if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && - !(chip->cellinfo & NAND_CI_CELLTYPE_MSK)) { - switch (chip->ecc.steps) { + if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && nand_is_slc(chip)) { + switch (ecc->steps) { case 2: mtd->subpage_sft = 1; break; @@ -3760,11 +4085,19 @@ int nand_scan_tail(struct mtd_info *mtd) chip->pagebuf = -1; /* Large page NAND with SOFT_ECC should support subpage reads */ - if ((chip->ecc.mode == NAND_ECC_SOFT) && (chip->page_shift > 9)) - chip->options |= NAND_SUBPAGE_READ; + switch (ecc->mode) { + case NAND_ECC_SOFT: + case NAND_ECC_SOFT_BCH: + if (chip->page_shift > 9) + chip->options |= NAND_SUBPAGE_READ; + break; + + default: + break; + } /* Fill in remaining MTD driver data */ - mtd->type = MTD_NANDFLASH; + mtd->type = nand_is_slc(chip) ? MTD_NANDFLASH : MTD_MLCNANDFLASH; mtd->flags = (chip->options & NAND_ROM) ? MTD_CAP_ROM : MTD_CAP_NANDFLASH; mtd->_erase = nand_erase; @@ -3785,9 +4118,9 @@ int nand_scan_tail(struct mtd_info *mtd) mtd->writebufsize = mtd->writesize; /* propagate ecc info to mtd_info */ - mtd->ecclayout = chip->ecc.layout; - mtd->ecc_strength = chip->ecc.strength; - mtd->ecc_step_size = chip->ecc.size; + mtd->ecclayout = ecc->layout; + mtd->ecc_strength = ecc->strength; + mtd->ecc_step_size = ecc->size; /* * Initialize bitflip_threshold to its default prior scan_bbt() call. * scan_bbt() might invoke mtd_read(), thus bitflip_threshold must be diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c index bc06196d573..7f0c3b4c2a4 100644 --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/nand_bbt.c @@ -412,25 +412,6 @@ static void read_abs_bbts(struct mtd_info *mtd, uint8_t *buf, } } -/* Scan a given block full */ -static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd, - loff_t offs, uint8_t *buf, size_t readlen, - int scanlen, int numpages) -{ - int ret, j; - - ret = scan_read_oob(mtd, buf, offs, readlen); - /* Ignore ECC errors when checking for BBM */ - if (ret && !mtd_is_bitflip_or_eccerr(ret)) - return ret; - - for (j = 0; j < numpages; j++, buf += scanlen) { - if (check_pattern(buf, scanlen, mtd->writesize, bd)) - return 1; - } - return 0; -} - /* Scan a given block partially */ static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd, loff_t offs, uint8_t *buf, int numpages) @@ -477,24 +458,17 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd, int chip) { struct nand_chip *this = mtd->priv; - int i, numblocks, numpages, scanlen; + int i, numblocks, numpages; int startblock; loff_t from; - size_t readlen; pr_info("Scanning device for bad blocks\n"); - if (bd->options & NAND_BBT_SCANALLPAGES) - numpages = 1 << (this->bbt_erase_shift - this->page_shift); - else if (bd->options & NAND_BBT_SCAN2NDPAGE) + if (bd->options & NAND_BBT_SCAN2NDPAGE) numpages = 2; else numpages = 1; - /* We need only read few bytes from the OOB area */ - scanlen = 0; - readlen = bd->len; - if (chip == -1) { numblocks = mtd->size >> this->bbt_erase_shift; startblock = 0; @@ -519,12 +493,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, BUG_ON(bd->options & NAND_BBT_NO_OOB); - if (bd->options & NAND_BBT_SCANALLPAGES) - ret = scan_block_full(mtd, bd, from, buf, readlen, - scanlen, numpages); - else - ret = scan_block_fast(mtd, bd, from, buf, numpages); - + ret = scan_block_fast(mtd, bd, from, buf, numpages); if (ret < 0) return ret; @@ -559,7 +528,7 @@ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr { struct nand_chip *this = mtd->priv; int i, chips; - int bits, startblock, block, dir; + int startblock, block, dir; int scanlen = mtd->writesize + mtd->oobsize; int bbtblocks; int blocktopage = this->bbt_erase_shift - this->page_shift; @@ -583,9 +552,6 @@ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr bbtblocks = mtd->size >> this->bbt_erase_shift; } - /* Number of bits for each erase block in the bbt */ - bits = td->options & NAND_BBT_NRBITS_MSK; - for (i = 0; i < chips; i++) { /* Reset version information */ td->version[i] = 0; @@ -1316,6 +1282,7 @@ static int nand_create_badblock_pattern(struct nand_chip *this) int nand_default_bbt(struct mtd_info *mtd) { struct nand_chip *this = mtd->priv; + int ret; /* Is a flash based bad block table requested? */ if (this->bbt_options & NAND_BBT_USE_FLASH) { @@ -1334,8 +1301,11 @@ int nand_default_bbt(struct mtd_info *mtd) this->bbt_md = NULL; } - if (!this->badblock_pattern) - nand_create_badblock_pattern(this); + if (!this->badblock_pattern) { + ret = nand_create_badblock_pattern(this); + if (ret) + return ret; + } return nand_scan_bbt(mtd, this->badblock_pattern); } @@ -1392,4 +1362,3 @@ int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs) } EXPORT_SYMBOL(nand_scan_bbt); -EXPORT_SYMBOL(nand_default_bbt); diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c index 053c9a2d47c..97c4c0216c9 100644 --- a/drivers/mtd/nand/nand_ecc.c +++ b/drivers/mtd/nand/nand_ecc.c @@ -506,7 +506,7 @@ int __nand_correct_data(unsigned char *buf, if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1) return 1; /* error in ECC data; no action needed */ - pr_err("%s: uncorrectable ECC error", __func__); + pr_err("%s: uncorrectable ECC error\n", __func__); return -1; } EXPORT_SYMBOL(__nand_correct_data); diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c index a87b0a3afa3..3d7c89fc103 100644 --- a/drivers/mtd/nand/nand_ids.c +++ b/drivers/mtd/nand/nand_ids.c @@ -43,6 +43,9 @@ struct nand_flash_dev nand_flash_ids[] = { {"TC58NVG6D2 64G 3.3V 8-bit", { .id = {0x98, 0xde, 0x94, 0x82, 0x76, 0x56, 0x04, 0x20} }, SZ_8K, SZ_8K, SZ_2M, 0, 8, 640, NAND_ECC_INFO(40, SZ_1K) }, + {"SDTNRGAMA 64G 3.3V 8-bit", + { .id = {0x45, 0xde, 0x94, 0x93, 0x76, 0x50} }, + SZ_16K, SZ_8K, SZ_4M, 0, 6, 1280, NAND_ECC_INFO(40, SZ_1K) }, LEGACY_ID_NAND("NAND 4MiB 5V 8-bit", 0x6B, 4, SZ_8K, SP_OPTIONS), LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS), @@ -169,6 +172,8 @@ struct nand_manufacturers nand_manuf_ids[] = { {NAND_MFR_AMD, "AMD/Spansion"}, {NAND_MFR_MACRONIX, "Macronix"}, {NAND_MFR_EON, "Eon"}, + {NAND_MFR_SANDISK, "SanDisk"}, + {NAND_MFR_INTEL, "Intel"}, {0x0, "Unknown"} }; diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index bdc1d15369f..4f0d83648e5 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -575,12 +575,12 @@ static int alloc_device(struct nandsim *ns) cfile = filp_open(cache_file, O_CREAT | O_RDWR | O_LARGEFILE, 0600); if (IS_ERR(cfile)) return PTR_ERR(cfile); - if (!cfile->f_op || (!cfile->f_op->read && !cfile->f_op->aio_read)) { + if (!(cfile->f_mode & FMODE_CAN_READ)) { NS_ERR("alloc_device: cache file not readable\n"); err = -EINVAL; goto err_close; } - if (!cfile->f_op->write && !cfile->f_op->aio_write) { + if (!(cfile->f_mode & FMODE_CAN_WRITE)) { NS_ERR("alloc_device: cache file not writeable\n"); err = -EINVAL; goto err_close; @@ -2372,7 +2372,7 @@ static int __init ns_init_module(void) if ((retval = init_nandsim(nsmtd)) != 0) goto err_exit; - if ((retval = nand_default_bbt(nsmtd)) != 0) + if ((retval = chip->scan_bbt(nsmtd)) != 0) goto err_exit; if ((retval = parse_badblocks(nand, nsmtd)) != 0) diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c index 8e148f1478f..69eaba690a9 100644 --- a/drivers/mtd/nand/ndfc.c +++ b/drivers/mtd/nand/ndfc.c @@ -30,6 +30,7 @@ #include <linux/mtd/ndfc.h> #include <linux/slab.h> #include <linux/mtd/mtd.h> +#include <linux/of_address.h> #include <linux/of_platform.h> #include <asm/io.h> diff --git a/drivers/mtd/nand/nuc900_nand.c b/drivers/mtd/nand/nuc900_nand.c index 52115151e4a..e8a5fffd6ab 100644 --- a/drivers/mtd/nand/nuc900_nand.c +++ b/drivers/mtd/nand/nuc900_nand.c @@ -10,7 +10,6 @@ */ #include <linux/slab.h> -#include <linux/init.h> #include <linux/module.h> #include <linux/interrupt.h> #include <linux/io.h> @@ -152,7 +151,8 @@ static void nuc900_nand_command_lp(struct mtd_info *mtd, unsigned int command, if (column != -1 || page_addr != -1) { if (column != -1) { - if (chip->options & NAND_BUSWIDTH_16) + if (chip->options & NAND_BUSWIDTH_16 && + !nand_opcode_8bits(command)) column >>= 1; write_addr_reg(nand, column); write_addr_reg(nand, column >> 8 | ENDADDR); @@ -225,7 +225,7 @@ static void nuc900_nand_enable(struct nuc900_nand *nand) val = __raw_readl(nand->reg + REG_FMICSR); if (!(val & NAND_EN)) - __raw_writel(val | NAND_EN, REG_FMICSR); + __raw_writel(val | NAND_EN, nand->reg + REG_FMICSR); val = __raw_readl(nand->reg + REG_SMCSR); @@ -241,12 +241,10 @@ static int nuc900_nand_probe(struct platform_device *pdev) { struct nuc900_nand *nuc900_nand; struct nand_chip *chip; - int retval; struct resource *res; - retval = 0; - - nuc900_nand = kzalloc(sizeof(struct nuc900_nand), GFP_KERNEL); + nuc900_nand = devm_kzalloc(&pdev->dev, sizeof(struct nuc900_nand), + GFP_KERNEL); if (!nuc900_nand) return -ENOMEM; chip = &(nuc900_nand->chip); @@ -255,11 +253,9 @@ static int nuc900_nand_probe(struct platform_device *pdev) nuc900_nand->mtd.owner = THIS_MODULE; spin_lock_init(&nuc900_nand->lock); - nuc900_nand->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(nuc900_nand->clk)) { - retval = -ENOENT; - goto fail1; - } + nuc900_nand->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(nuc900_nand->clk)) + return -ENOENT; clk_enable(nuc900_nand->clk); chip->cmdfunc = nuc900_nand_command_lp; @@ -272,57 +268,29 @@ static int nuc900_nand_probe(struct platform_device *pdev) chip->ecc.mode = NAND_ECC_SOFT; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - retval = -ENXIO; - goto fail1; - } - - if (!request_mem_region(res->start, resource_size(res), pdev->name)) { - retval = -EBUSY; - goto fail1; - } - - nuc900_nand->reg = ioremap(res->start, resource_size(res)); - if (!nuc900_nand->reg) { - retval = -ENOMEM; - goto fail2; - } + nuc900_nand->reg = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(nuc900_nand->reg)) + return PTR_ERR(nuc900_nand->reg); nuc900_nand_enable(nuc900_nand); - if (nand_scan(&(nuc900_nand->mtd), 1)) { - retval = -ENXIO; - goto fail3; - } + if (nand_scan(&(nuc900_nand->mtd), 1)) + return -ENXIO; mtd_device_register(&(nuc900_nand->mtd), partitions, ARRAY_SIZE(partitions)); platform_set_drvdata(pdev, nuc900_nand); - return retval; - -fail3: iounmap(nuc900_nand->reg); -fail2: release_mem_region(res->start, resource_size(res)); -fail1: kfree(nuc900_nand); - return retval; + return 0; } static int nuc900_nand_remove(struct platform_device *pdev) { struct nuc900_nand *nuc900_nand = platform_get_drvdata(pdev); - struct resource *res; nand_release(&nuc900_nand->mtd); - iounmap(nuc900_nand->reg); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(res->start, resource_size(res)); - clk_disable(nuc900_nand->clk); - clk_put(nuc900_nand->clk); - - kfree(nuc900_nand); return 0; } diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 4ecf0e5fd48..f0ed92e210a 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -25,10 +25,8 @@ #include <linux/of.h> #include <linux/of_device.h> -#ifdef CONFIG_MTD_NAND_OMAP_BCH -#include <linux/bch.h> +#include <linux/mtd/nand_bch.h> #include <linux/platform_data/elm.h> -#endif #include <linux/platform_data/mtd-nand-omap2.h> @@ -120,14 +118,9 @@ #define OMAP24XX_DMA_GPMC 4 -#define BCH8_MAX_ERROR 8 /* upto 8 bit correctable */ -#define BCH4_MAX_ERROR 4 /* upto 4 bit correctable */ - #define SECTOR_BYTES 512 /* 4 bit padding to make byte aligned, 56 = 52 + 4 */ #define BCH4_BIT_PAD 4 -#define BCH8_ECC_MAX ((SECTOR_BYTES + BCH8_ECC_OOB_BYTES) * 8) -#define BCH4_ECC_MAX ((SECTOR_BYTES + BCH4_ECC_OOB_BYTES) * 8) /* GPMC ecc engine settings for read */ #define BCH_WRAPMODE_1 1 /* BCH wrap mode 1 */ @@ -141,7 +134,13 @@ #define BCH_ECC_SIZE0 0x0 /* ecc_size0 = 0, no oob protection */ #define BCH_ECC_SIZE1 0x20 /* ecc_size1 = 32 */ +#define BADBLOCK_MARKER_LENGTH 2 + #ifdef CONFIG_MTD_NAND_OMAP_BCH +static u_char bch16_vector[] = {0xf5, 0x24, 0x1c, 0xd0, 0x61, 0xb3, 0xf1, 0x55, + 0x2e, 0x2c, 0x86, 0xa3, 0xed, 0x36, 0x1b, 0x78, + 0x48, 0x76, 0xa9, 0x3b, 0x97, 0xd1, 0x7a, 0x93, + 0x07, 0x0e}; static u_char bch8_vector[] = {0xf3, 0xdb, 0x14, 0x16, 0x8b, 0xd2, 0xbe, 0xcc, 0xac, 0x6b, 0xff, 0x99, 0x7b}; static u_char bch4_vector[] = {0x00, 0x6b, 0x31, 0xdd, 0x41, 0xbc, 0x10}; @@ -149,17 +148,6 @@ static u_char bch4_vector[] = {0x00, 0x6b, 0x31, 0xdd, 0x41, 0xbc, 0x10}; /* oob info generated runtime depending on ecc algorithm and layout selected */ static struct nand_ecclayout omap_oobinfo; -/* Define some generic bad / good block scan pattern which are used - * while scanning a device for factory marked good / bad blocks - */ -static uint8_t scan_ff_pattern[] = { 0xff }; -static struct nand_bbt_descr bb_descrip_flashbased = { - .options = NAND_BBT_SCANALLPAGES, - .offs = 0, - .len = 1, - .pattern = scan_ff_pattern, -}; - struct omap_nand_info { struct nand_hw_control controller; @@ -170,7 +158,7 @@ struct omap_nand_info { int gpmc_cs; unsigned long phys_base; - unsigned long mem_size; + enum omap_ecc ecc_opt; struct completion comp; struct dma_chan *dma; int gpmc_irq_fifo; @@ -182,14 +170,9 @@ struct omap_nand_info { u_char *buf; int buf_len; struct gpmc_nand_regs reg; - -#ifdef CONFIG_MTD_NAND_OMAP_BCH - struct bch_control *bch; - struct nand_ecclayout ecclayout; - bool is_elm_used; + /* fields specific for BCHx_HW ECC scheme */ struct device *elm_dev; struct device_node *of_node; -#endif }; /** @@ -1058,10 +1041,8 @@ static int omap_dev_ready(struct mtd_info *mtd) } } -#ifdef CONFIG_MTD_NAND_OMAP_BCH - /** - * omap3_enable_hwecc_bch - Program OMAP3 GPMC to perform BCH ECC correction + * omap_enable_hwecc_bch - Program GPMC to perform BCH ECC calculation * @mtd: MTD device structure * @mode: Read/Write mode * @@ -1072,50 +1053,86 @@ static int omap_dev_ready(struct mtd_info *mtd) * eccsize0 = 0 (no additional protected byte in spare area) * eccsize1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area) */ -static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode) +static void __maybe_unused omap_enable_hwecc_bch(struct mtd_info *mtd, int mode) { - int nerrors; + unsigned int bch_type; unsigned int dev_width, nsectors; struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, mtd); + enum omap_ecc ecc_opt = info->ecc_opt; struct nand_chip *chip = mtd->priv; u32 val, wr_mode; unsigned int ecc_size1, ecc_size0; - /* Using wrapping mode 6 for writing */ - wr_mode = BCH_WRAPMODE_6; - - /* - * ECC engine enabled for valid ecc_size0 nibbles - * and disabled for ecc_size1 nibbles. - */ - ecc_size0 = BCH_ECC_SIZE0; - ecc_size1 = BCH_ECC_SIZE1; - - /* Perform ecc calculation on 512-byte sector */ - nsectors = 1; - - /* Update number of error correction */ - nerrors = info->nand.ecc.strength; - - /* Multi sector reading/writing for NAND flash with page size < 4096 */ - if (info->is_elm_used && (mtd->writesize <= 4096)) { + /* GPMC configurations for calculating ECC */ + switch (ecc_opt) { + case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: + bch_type = 0; + nsectors = 1; if (mode == NAND_ECC_READ) { - /* Using wrapping mode 1 for reading */ - wr_mode = BCH_WRAPMODE_1; - - /* - * ECC engine enabled for ecc_size0 nibbles - * and disabled for ecc_size1 nibbles. - */ - ecc_size0 = (nerrors == 8) ? - BCH8R_ECC_SIZE0 : BCH4R_ECC_SIZE0; - ecc_size1 = (nerrors == 8) ? - BCH8R_ECC_SIZE1 : BCH4R_ECC_SIZE1; + wr_mode = BCH_WRAPMODE_6; + ecc_size0 = BCH_ECC_SIZE0; + ecc_size1 = BCH_ECC_SIZE1; + } else { + wr_mode = BCH_WRAPMODE_6; + ecc_size0 = BCH_ECC_SIZE0; + ecc_size1 = BCH_ECC_SIZE1; } - - /* Perform ecc calculation for one page (< 4096) */ - nsectors = info->nand.ecc.steps; + break; + case OMAP_ECC_BCH4_CODE_HW: + bch_type = 0; + nsectors = chip->ecc.steps; + if (mode == NAND_ECC_READ) { + wr_mode = BCH_WRAPMODE_1; + ecc_size0 = BCH4R_ECC_SIZE0; + ecc_size1 = BCH4R_ECC_SIZE1; + } else { + wr_mode = BCH_WRAPMODE_6; + ecc_size0 = BCH_ECC_SIZE0; + ecc_size1 = BCH_ECC_SIZE1; + } + break; + case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: + bch_type = 1; + nsectors = 1; + if (mode == NAND_ECC_READ) { + wr_mode = BCH_WRAPMODE_6; + ecc_size0 = BCH_ECC_SIZE0; + ecc_size1 = BCH_ECC_SIZE1; + } else { + wr_mode = BCH_WRAPMODE_6; + ecc_size0 = BCH_ECC_SIZE0; + ecc_size1 = BCH_ECC_SIZE1; + } + break; + case OMAP_ECC_BCH8_CODE_HW: + bch_type = 1; + nsectors = chip->ecc.steps; + if (mode == NAND_ECC_READ) { + wr_mode = BCH_WRAPMODE_1; + ecc_size0 = BCH8R_ECC_SIZE0; + ecc_size1 = BCH8R_ECC_SIZE1; + } else { + wr_mode = BCH_WRAPMODE_6; + ecc_size0 = BCH_ECC_SIZE0; + ecc_size1 = BCH_ECC_SIZE1; + } + break; + case OMAP_ECC_BCH16_CODE_HW: + bch_type = 0x2; + nsectors = chip->ecc.steps; + if (mode == NAND_ECC_READ) { + wr_mode = 0x01; + ecc_size0 = 52; /* ECC bits in nibbles per sector */ + ecc_size1 = 0; /* non-ECC bits in nibbles per sector */ + } else { + wr_mode = 0x01; + ecc_size0 = 0; /* extra bits in nibbles per sector */ + ecc_size1 = 52; /* OOB bits in nibbles per sector */ + } + break; + default: + return; } writel(ECC1, info->reg.gpmc_ecc_control); @@ -1128,7 +1145,7 @@ static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode) /* BCH configuration */ val = ((1 << 16) | /* enable BCH */ - (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */ + (bch_type << 12) | /* BCH4/BCH8/BCH16 */ (wr_mode << 8) | /* wrap mode */ (dev_width << 7) | /* bus width */ (((nsectors-1) & 0x7) << 4) | /* number of sectors */ @@ -1141,127 +1158,40 @@ static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode) writel(ECCCLEAR | ECC1, info->reg.gpmc_ecc_control); } -/** - * omap3_calculate_ecc_bch4 - Generate 7 bytes of ECC bytes - * @mtd: MTD device structure - * @dat: The pointer to data on which ecc is computed - * @ecc_code: The ecc_code buffer - */ -static int omap3_calculate_ecc_bch4(struct mtd_info *mtd, const u_char *dat, - u_char *ecc_code) -{ - struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, - mtd); - unsigned long nsectors, val1, val2; - int i; - - nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1; - - for (i = 0; i < nsectors; i++) { - - /* Read hw-computed remainder */ - val1 = readl(info->reg.gpmc_bch_result0[i]); - val2 = readl(info->reg.gpmc_bch_result1[i]); - - /* - * Add constant polynomial to remainder, in order to get an ecc - * sequence of 0xFFs for a buffer filled with 0xFFs; and - * left-justify the resulting polynomial. - */ - *ecc_code++ = 0x28 ^ ((val2 >> 12) & 0xFF); - *ecc_code++ = 0x13 ^ ((val2 >> 4) & 0xFF); - *ecc_code++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF)); - *ecc_code++ = 0x39 ^ ((val1 >> 20) & 0xFF); - *ecc_code++ = 0x96 ^ ((val1 >> 12) & 0xFF); - *ecc_code++ = 0xac ^ ((val1 >> 4) & 0xFF); - *ecc_code++ = 0x7f ^ ((val1 & 0xF) << 4); - } - - return 0; -} - -/** - * omap3_calculate_ecc_bch8 - Generate 13 bytes of ECC bytes - * @mtd: MTD device structure - * @dat: The pointer to data on which ecc is computed - * @ecc_code: The ecc_code buffer - */ -static int omap3_calculate_ecc_bch8(struct mtd_info *mtd, const u_char *dat, - u_char *ecc_code) -{ - struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, - mtd); - unsigned long nsectors, val1, val2, val3, val4; - int i; - - nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1; - - for (i = 0; i < nsectors; i++) { - - /* Read hw-computed remainder */ - val1 = readl(info->reg.gpmc_bch_result0[i]); - val2 = readl(info->reg.gpmc_bch_result1[i]); - val3 = readl(info->reg.gpmc_bch_result2[i]); - val4 = readl(info->reg.gpmc_bch_result3[i]); - - /* - * Add constant polynomial to remainder, in order to get an ecc - * sequence of 0xFFs for a buffer filled with 0xFFs. - */ - *ecc_code++ = 0xef ^ (val4 & 0xFF); - *ecc_code++ = 0x51 ^ ((val3 >> 24) & 0xFF); - *ecc_code++ = 0x2e ^ ((val3 >> 16) & 0xFF); - *ecc_code++ = 0x09 ^ ((val3 >> 8) & 0xFF); - *ecc_code++ = 0xed ^ (val3 & 0xFF); - *ecc_code++ = 0x93 ^ ((val2 >> 24) & 0xFF); - *ecc_code++ = 0x9a ^ ((val2 >> 16) & 0xFF); - *ecc_code++ = 0xc2 ^ ((val2 >> 8) & 0xFF); - *ecc_code++ = 0x97 ^ (val2 & 0xFF); - *ecc_code++ = 0x79 ^ ((val1 >> 24) & 0xFF); - *ecc_code++ = 0xe5 ^ ((val1 >> 16) & 0xFF); - *ecc_code++ = 0x24 ^ ((val1 >> 8) & 0xFF); - *ecc_code++ = 0xb5 ^ (val1 & 0xFF); - } - - return 0; -} +static u8 bch4_polynomial[] = {0x28, 0x13, 0xcc, 0x39, 0x96, 0xac, 0x7f}; +static u8 bch8_polynomial[] = {0xef, 0x51, 0x2e, 0x09, 0xed, 0x93, 0x9a, 0xc2, + 0x97, 0x79, 0xe5, 0x24, 0xb5}; /** - * omap3_calculate_ecc_bch - Generate bytes of ECC bytes + * omap_calculate_ecc_bch - Generate bytes of ECC bytes * @mtd: MTD device structure * @dat: The pointer to data on which ecc is computed * @ecc_code: The ecc_code buffer * * Support calculating of BCH4/8 ecc vectors for the page */ -static int omap3_calculate_ecc_bch(struct mtd_info *mtd, const u_char *dat, - u_char *ecc_code) +static int __maybe_unused omap_calculate_ecc_bch(struct mtd_info *mtd, + const u_char *dat, u_char *ecc_calc) { struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, mtd); + int eccbytes = info->nand.ecc.bytes; + struct gpmc_nand_regs *gpmc_regs = &info->reg; + u8 *ecc_code; unsigned long nsectors, bch_val1, bch_val2, bch_val3, bch_val4; - int i, eccbchtsel; + u32 val; + int i, j; nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1; - /* - * find BCH scheme used - * 0 -> BCH4 - * 1 -> BCH8 - */ - eccbchtsel = ((readl(info->reg.gpmc_ecc_config) >> 12) & 0x3); - for (i = 0; i < nsectors; i++) { - - /* Read hw-computed remainder */ - bch_val1 = readl(info->reg.gpmc_bch_result0[i]); - bch_val2 = readl(info->reg.gpmc_bch_result1[i]); - if (eccbchtsel) { - bch_val3 = readl(info->reg.gpmc_bch_result2[i]); - bch_val4 = readl(info->reg.gpmc_bch_result3[i]); - } - - if (eccbchtsel) { - /* BCH8 ecc scheme */ + ecc_code = ecc_calc; + switch (info->ecc_opt) { + case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: + case OMAP_ECC_BCH8_CODE_HW: + bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]); + bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]); + bch_val3 = readl(gpmc_regs->gpmc_bch_result2[i]); + bch_val4 = readl(gpmc_regs->gpmc_bch_result3[i]); *ecc_code++ = (bch_val4 & 0xFF); *ecc_code++ = ((bch_val3 >> 24) & 0xFF); *ecc_code++ = ((bch_val3 >> 16) & 0xFF); @@ -1275,14 +1205,11 @@ static int omap3_calculate_ecc_bch(struct mtd_info *mtd, const u_char *dat, *ecc_code++ = ((bch_val1 >> 16) & 0xFF); *ecc_code++ = ((bch_val1 >> 8) & 0xFF); *ecc_code++ = (bch_val1 & 0xFF); - /* - * Setting 14th byte to zero to handle - * erased page & maintain compatibility - * with RBL - */ - *ecc_code++ = 0x0; - } else { - /* BCH4 ecc scheme */ + break; + case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: + case OMAP_ECC_BCH4_CODE_HW: + bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]); + bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]); *ecc_code++ = ((bch_val2 >> 12) & 0xFF); *ecc_code++ = ((bch_val2 >> 4) & 0xFF); *ecc_code++ = ((bch_val2 & 0xF) << 4) | @@ -1291,17 +1218,81 @@ static int omap3_calculate_ecc_bch(struct mtd_info *mtd, const u_char *dat, *ecc_code++ = ((bch_val1 >> 12) & 0xFF); *ecc_code++ = ((bch_val1 >> 4) & 0xFF); *ecc_code++ = ((bch_val1 & 0xF) << 4); - /* - * Setting 8th byte to zero to handle - * erased page - */ - *ecc_code++ = 0x0; + break; + case OMAP_ECC_BCH16_CODE_HW: + val = readl(gpmc_regs->gpmc_bch_result6[i]); + ecc_code[0] = ((val >> 8) & 0xFF); + ecc_code[1] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result5[i]); + ecc_code[2] = ((val >> 24) & 0xFF); + ecc_code[3] = ((val >> 16) & 0xFF); + ecc_code[4] = ((val >> 8) & 0xFF); + ecc_code[5] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result4[i]); + ecc_code[6] = ((val >> 24) & 0xFF); + ecc_code[7] = ((val >> 16) & 0xFF); + ecc_code[8] = ((val >> 8) & 0xFF); + ecc_code[9] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result3[i]); + ecc_code[10] = ((val >> 24) & 0xFF); + ecc_code[11] = ((val >> 16) & 0xFF); + ecc_code[12] = ((val >> 8) & 0xFF); + ecc_code[13] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result2[i]); + ecc_code[14] = ((val >> 24) & 0xFF); + ecc_code[15] = ((val >> 16) & 0xFF); + ecc_code[16] = ((val >> 8) & 0xFF); + ecc_code[17] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result1[i]); + ecc_code[18] = ((val >> 24) & 0xFF); + ecc_code[19] = ((val >> 16) & 0xFF); + ecc_code[20] = ((val >> 8) & 0xFF); + ecc_code[21] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result0[i]); + ecc_code[22] = ((val >> 24) & 0xFF); + ecc_code[23] = ((val >> 16) & 0xFF); + ecc_code[24] = ((val >> 8) & 0xFF); + ecc_code[25] = ((val >> 0) & 0xFF); + break; + default: + return -EINVAL; + } + + /* ECC scheme specific syndrome customizations */ + switch (info->ecc_opt) { + case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: + /* Add constant polynomial to remainder, so that + * ECC of blank pages results in 0x0 on reading back */ + for (j = 0; j < eccbytes; j++) + ecc_calc[j] ^= bch4_polynomial[j]; + break; + case OMAP_ECC_BCH4_CODE_HW: + /* Set 8th ECC byte as 0x0 for ROM compatibility */ + ecc_calc[eccbytes - 1] = 0x0; + break; + case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: + /* Add constant polynomial to remainder, so that + * ECC of blank pages results in 0x0 on reading back */ + for (j = 0; j < eccbytes; j++) + ecc_calc[j] ^= bch8_polynomial[j]; + break; + case OMAP_ECC_BCH8_CODE_HW: + /* Set 14th ECC byte as 0x0 for ROM compatibility */ + ecc_calc[eccbytes - 1] = 0x0; + break; + case OMAP_ECC_BCH16_CODE_HW: + break; + default: + return -EINVAL; } + + ecc_calc += eccbytes; } return 0; } +#ifdef CONFIG_MTD_NAND_OMAP_BCH /** * erased_sector_bitflips - count bit flips * @data: data sector buffer @@ -1349,55 +1340,50 @@ static int erased_sector_bitflips(u_char *data, u_char *oob, * @calc_ecc: ecc read from HW ECC registers * * Calculated ecc vector reported as zero in case of non-error pages. - * In case of error/erased pages non-zero error vector is reported. - * In case of non-zero ecc vector, check read_ecc at fixed offset - * (x = 13/7 in case of BCH8/4 == 0) to find page programmed or not. - * To handle bit flips in this data, count the number of 0's in - * read_ecc[x] and check if it greater than 4. If it is less, it is - * programmed page, else erased page. - * - * 1. If page is erased, check with standard ecc vector (ecc vector - * for erased page to find any bit flip). If check fails, bit flip - * is present in erased page. Count the bit flips in erased page and - * if it falls under correctable level, report page with 0xFF and - * update the correctable bit information. - * 2. If error is reported on programmed page, update elm error - * vector and correct the page with ELM error correction routine. - * + * In case of non-zero ecc vector, first filter out erased-pages, and + * then process data via ELM to detect bit-flips. */ static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data, u_char *read_ecc, u_char *calc_ecc) { struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, mtd); + struct nand_ecc_ctrl *ecc = &info->nand.ecc; int eccsteps = info->nand.ecc.steps; int i , j, stat = 0; - int eccsize, eccflag, ecc_vector_size; + int eccflag, actual_eccbytes; struct elm_errorvec err_vec[ERROR_VECTOR_MAX]; u_char *ecc_vec = calc_ecc; u_char *spare_ecc = read_ecc; u_char *erased_ecc_vec; - enum bch_ecc type; + u_char *buf; + int bitflip_count; bool is_error_reported = false; + u32 bit_pos, byte_pos, error_max, pos; + int err; - /* Initialize elm error vector to zero */ - memset(err_vec, 0, sizeof(err_vec)); - - if (info->nand.ecc.strength == BCH8_MAX_ERROR) { - type = BCH8_ECC; - erased_ecc_vec = bch8_vector; - } else { - type = BCH4_ECC; + switch (info->ecc_opt) { + case OMAP_ECC_BCH4_CODE_HW: + /* omit 7th ECC byte reserved for ROM code compatibility */ + actual_eccbytes = ecc->bytes - 1; erased_ecc_vec = bch4_vector; + break; + case OMAP_ECC_BCH8_CODE_HW: + /* omit 14th ECC byte reserved for ROM code compatibility */ + actual_eccbytes = ecc->bytes - 1; + erased_ecc_vec = bch8_vector; + break; + case OMAP_ECC_BCH16_CODE_HW: + actual_eccbytes = ecc->bytes; + erased_ecc_vec = bch16_vector; + break; + default: + pr_err("invalid driver configuration\n"); + return -EINVAL; } - ecc_vector_size = info->nand.ecc.bytes; - - /* - * Remove extra byte padding for BCH8 RBL - * compatibility and erased page handling - */ - eccsize = ecc_vector_size - 1; + /* Initialize elm error vector to zero */ + memset(err_vec, 0, sizeof(err_vec)); for (i = 0; i < eccsteps ; i++) { eccflag = 0; /* initialize eccflag */ @@ -1406,8 +1392,7 @@ static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data, * Check any error reported, * In case of error, non zero ecc reported. */ - - for (j = 0; (j < eccsize); j++) { + for (j = 0; j < actual_eccbytes; j++) { if (calc_ecc[j] != 0) { eccflag = 1; /* non zero ecc, error present */ break; @@ -1415,76 +1400,73 @@ static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data, } if (eccflag == 1) { - /* - * Set threshold to minimum of 4, half of ecc.strength/2 - * to allow max bit flip in byte to 4 - */ - unsigned int threshold = min_t(unsigned int, 4, - info->nand.ecc.strength / 2); - - /* - * Check data area is programmed by counting - * number of 0's at fixed offset in spare area. - * Checking count of 0's against threshold. - * In case programmed page expects at least threshold - * zeros in byte. - * If zeros are less than threshold for programmed page/ - * zeros are more than threshold erased page, either - * case page reported as uncorrectable. - */ - if (hweight8(~read_ecc[eccsize]) >= threshold) { + if (memcmp(calc_ecc, erased_ecc_vec, + actual_eccbytes) == 0) { /* - * Update elm error vector as - * data area is programmed + * calc_ecc[] matches pattern for ECC(all 0xff) + * so this is definitely an erased-page */ - err_vec[i].error_reported = true; - is_error_reported = true; } else { - /* Error reported in erased page */ - int bitflip_count; - u_char *buf = &data[info->nand.ecc.size * i]; - - if (memcmp(calc_ecc, erased_ecc_vec, eccsize)) { - bitflip_count = erased_sector_bitflips( - buf, read_ecc, info); - - if (bitflip_count) - stat += bitflip_count; - else - return -EINVAL; + buf = &data[info->nand.ecc.size * i]; + /* + * count number of 0-bits in read_buf. + * This check can be removed once a similar + * check is introduced in generic NAND driver + */ + bitflip_count = erased_sector_bitflips( + buf, read_ecc, info); + if (bitflip_count) { + /* + * number of 0-bits within ECC limits + * So this may be an erased-page + */ + stat += bitflip_count; + } else { + /* + * Too many 0-bits. It may be a + * - programmed-page, OR + * - erased-page with many bit-flips + * So this page requires check by ELM + */ + err_vec[i].error_reported = true; + is_error_reported = true; } } } /* Update the ecc vector */ - calc_ecc += ecc_vector_size; - read_ecc += ecc_vector_size; + calc_ecc += ecc->bytes; + read_ecc += ecc->bytes; } /* Check if any error reported */ if (!is_error_reported) - return 0; + return stat; /* Decode BCH error using ELM module */ elm_decode_bch_error_page(info->elm_dev, ecc_vec, err_vec); + err = 0; for (i = 0; i < eccsteps; i++) { - if (err_vec[i].error_reported) { + if (err_vec[i].error_uncorrectable) { + pr_err("nand: uncorrectable bit-flips found\n"); + err = -EBADMSG; + } else if (err_vec[i].error_reported) { for (j = 0; j < err_vec[i].error_count; j++) { - u32 bit_pos, byte_pos, error_max, pos; - - if (type == BCH8_ECC) - error_max = BCH8_ECC_MAX; - else - error_max = BCH4_ECC_MAX; - - if (info->nand.ecc.strength == BCH8_MAX_ERROR) - pos = err_vec[i].error_loc[j]; - else - /* Add 4 to take care 4 bit padding */ + switch (info->ecc_opt) { + case OMAP_ECC_BCH4_CODE_HW: + /* Add 4 bits to take care of padding */ pos = err_vec[i].error_loc[j] + BCH4_BIT_PAD; - + break; + case OMAP_ECC_BCH8_CODE_HW: + case OMAP_ECC_BCH16_CODE_HW: + pos = err_vec[i].error_loc[j]; + break; + default: + return -EINVAL; + } + error_max = (ecc->size + actual_eccbytes) * 8; /* Calculate bit position of error */ bit_pos = pos % 8; @@ -1492,13 +1474,22 @@ static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data, byte_pos = (error_max - pos - 1) / 8; if (pos < error_max) { - if (byte_pos < 512) + if (byte_pos < 512) { + pr_debug("bitflip@dat[%d]=%x\n", + byte_pos, data[byte_pos]); data[byte_pos] ^= 1 << bit_pos; - else + } else { + pr_debug("bitflip@oob[%d]=%x\n", + (byte_pos - 512), + spare_ecc[byte_pos - 512]); spare_ecc[byte_pos - 512] ^= 1 << bit_pos; + } + } else { + pr_err("invalid bit-flip @ %d:%d\n", + byte_pos, bit_pos); + err = -EBADMSG; } - /* else, not interested to correct ecc */ } } @@ -1506,48 +1497,11 @@ static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data, stat += err_vec[i].error_count; /* Update page data with sector size */ - data += info->nand.ecc.size; - spare_ecc += ecc_vector_size; + data += ecc->size; + spare_ecc += ecc->bytes; } - for (i = 0; i < eccsteps; i++) - /* Return error if uncorrectable error present */ - if (err_vec[i].error_uncorrectable) - return -EINVAL; - - return stat; -} - -/** - * omap3_correct_data_bch - Decode received data and correct errors - * @mtd: MTD device structure - * @data: page data - * @read_ecc: ecc read from nand flash - * @calc_ecc: ecc read from HW ECC registers - */ -static int omap3_correct_data_bch(struct mtd_info *mtd, u_char *data, - u_char *read_ecc, u_char *calc_ecc) -{ - int i, count; - /* cannot correct more than 8 errors */ - unsigned int errloc[8]; - struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, - mtd); - - count = decode_bch(info->bch, NULL, 512, read_ecc, calc_ecc, NULL, - errloc); - if (count > 0) { - /* correct errors */ - for (i = 0; i < count; i++) { - /* correct data only, not ecc bytes */ - if (errloc[i] < 8*512) - data[errloc[i]/8] ^= 1 << (errloc[i] & 7); - pr_debug("corrected bitflip %u\n", errloc[i]); - } - } else if (count < 0) { - pr_err("ecc unrecoverable error\n"); - } - return count; + return (err) ? err : stat; } /** @@ -1637,197 +1591,48 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip, } /** - * omap3_free_bch - Release BCH ecc resources - * @mtd: MTD device structure - */ -static void omap3_free_bch(struct mtd_info *mtd) -{ - struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, - mtd); - if (info->bch) { - free_bch(info->bch); - info->bch = NULL; - } -} - -/** - * omap3_init_bch - Initialize BCH ECC - * @mtd: MTD device structure - * @ecc_opt: OMAP ECC mode (OMAP_ECC_BCH4_CODE_HW or OMAP_ECC_BCH8_CODE_HW) - */ -static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt) -{ - int max_errors; - struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, - mtd); -#ifdef CONFIG_MTD_NAND_OMAP_BCH8 - const int hw_errors = BCH8_MAX_ERROR; -#else - const int hw_errors = BCH4_MAX_ERROR; -#endif - enum bch_ecc bch_type; - const __be32 *parp; - int lenp; - struct device_node *elm_node; - - info->bch = NULL; - - max_errors = (ecc_opt == OMAP_ECC_BCH8_CODE_HW) ? - BCH8_MAX_ERROR : BCH4_MAX_ERROR; - if (max_errors != hw_errors) { - pr_err("cannot configure %d-bit BCH ecc, only %d-bit supported", - max_errors, hw_errors); - goto fail; - } - - info->nand.ecc.size = 512; - info->nand.ecc.hwctl = omap3_enable_hwecc_bch; - info->nand.ecc.mode = NAND_ECC_HW; - info->nand.ecc.strength = max_errors; - - if (hw_errors == BCH8_MAX_ERROR) - bch_type = BCH8_ECC; - else - bch_type = BCH4_ECC; - - /* Detect availability of ELM module */ - parp = of_get_property(info->of_node, "elm_id", &lenp); - if ((parp == NULL) && (lenp != (sizeof(void *) * 2))) { - pr_err("Missing elm_id property, fall back to Software BCH\n"); - info->is_elm_used = false; - } else { - struct platform_device *pdev; - - elm_node = of_find_node_by_phandle(be32_to_cpup(parp)); - pdev = of_find_device_by_node(elm_node); - info->elm_dev = &pdev->dev; - - if (elm_config(info->elm_dev, bch_type) == 0) - info->is_elm_used = true; - } - - if (info->is_elm_used && (mtd->writesize <= 4096)) { - - if (hw_errors == BCH8_MAX_ERROR) - info->nand.ecc.bytes = BCH8_SIZE; - else - info->nand.ecc.bytes = BCH4_SIZE; - - info->nand.ecc.correct = omap_elm_correct_data; - info->nand.ecc.calculate = omap3_calculate_ecc_bch; - info->nand.ecc.read_page = omap_read_page_bch; - info->nand.ecc.write_page = omap_write_page_bch; - } else { - /* - * software bch library is only used to detect and - * locate errors - */ - info->bch = init_bch(13, max_errors, - 0x201b /* hw polynomial */); - if (!info->bch) - goto fail; - - info->nand.ecc.correct = omap3_correct_data_bch; - - /* - * The number of corrected errors in an ecc block that will - * trigger block scrubbing defaults to the ecc strength (4 or 8) - * Set mtd->bitflip_threshold here to define a custom threshold. - */ - - if (max_errors == 8) { - info->nand.ecc.bytes = 13; - info->nand.ecc.calculate = omap3_calculate_ecc_bch8; - } else { - info->nand.ecc.bytes = 7; - info->nand.ecc.calculate = omap3_calculate_ecc_bch4; - } - } - - pr_info("enabling NAND BCH ecc with %d-bit correction\n", max_errors); - return 0; -fail: - omap3_free_bch(mtd); - return -1; -} - -/** - * omap3_init_bch_tail - Build an oob layout for BCH ECC correction. - * @mtd: MTD device structure + * is_elm_present - checks for presence of ELM module by scanning DT nodes + * @omap_nand_info: NAND device structure containing platform data + * @bch_type: 0x0=BCH4, 0x1=BCH8, 0x2=BCH16 */ -static int omap3_init_bch_tail(struct mtd_info *mtd) +static int is_elm_present(struct omap_nand_info *info, + struct device_node *elm_node, enum bch_ecc bch_type) { - int i, steps, offset; - struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, - mtd); - struct nand_ecclayout *layout = &info->ecclayout; - - /* build oob layout */ - steps = mtd->writesize/info->nand.ecc.size; - layout->eccbytes = steps*info->nand.ecc.bytes; - - /* do not bother creating special oob layouts for small page devices */ - if (mtd->oobsize < 64) { - pr_err("BCH ecc is not supported on small page devices\n"); - goto fail; + struct platform_device *pdev; + struct nand_ecc_ctrl *ecc = &info->nand.ecc; + int err; + /* check whether elm-id is passed via DT */ + if (!elm_node) { + pr_err("nand: error: ELM DT node not found\n"); + return -ENODEV; } - - /* reserve 2 bytes for bad block marker */ - if (layout->eccbytes+2 > mtd->oobsize) { - pr_err("no oob layout available for oobsize %d eccbytes %u\n", - mtd->oobsize, layout->eccbytes); - goto fail; + pdev = of_find_device_by_node(elm_node); + /* check whether ELM device is registered */ + if (!pdev) { + pr_err("nand: error: ELM device not found\n"); + return -ENODEV; } + /* ELM module available, now configure it */ + info->elm_dev = &pdev->dev; + err = elm_config(info->elm_dev, bch_type, + (info->mtd.writesize / ecc->size), ecc->size, ecc->bytes); - /* ECC layout compatible with RBL for BCH8 */ - if (info->is_elm_used && (info->nand.ecc.bytes == BCH8_SIZE)) - offset = 2; - else - offset = mtd->oobsize - layout->eccbytes; - - /* put ecc bytes at oob tail */ - for (i = 0; i < layout->eccbytes; i++) - layout->eccpos[i] = offset + i; - - if (info->is_elm_used && (info->nand.ecc.bytes == BCH8_SIZE)) - layout->oobfree[0].offset = 2 + layout->eccbytes * steps; - else - layout->oobfree[0].offset = 2; - - layout->oobfree[0].length = mtd->oobsize-2-layout->eccbytes; - info->nand.ecc.layout = layout; - - if (!(info->nand.options & NAND_BUSWIDTH_16)) - info->nand.badblock_pattern = &bb_descrip_flashbased; - return 0; -fail: - omap3_free_bch(mtd); - return -1; -} - -#else -static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt) -{ - pr_err("CONFIG_MTD_NAND_OMAP_BCH is not enabled\n"); - return -1; -} -static int omap3_init_bch_tail(struct mtd_info *mtd) -{ - return -1; -} -static void omap3_free_bch(struct mtd_info *mtd) -{ + return err; } -#endif /* CONFIG_MTD_NAND_OMAP_BCH */ +#endif /* CONFIG_MTD_NAND_ECC_BCH */ static int omap_nand_probe(struct platform_device *pdev) { struct omap_nand_info *info; struct omap_nand_platform_data *pdata; + struct mtd_info *mtd; + struct nand_chip *nand_chip; + struct nand_ecclayout *ecclayout; int err; - int i, offset; - dma_cap_mask_t mask; - unsigned sig; + int i; + dma_cap_mask_t mask; + unsigned sig; + unsigned oob_index; struct resource *res; struct mtd_part_parser_data ppdata = {}; @@ -1837,7 +1642,8 @@ static int omap_nand_probe(struct platform_device *pdev) return -ENODEV; } - info = kzalloc(sizeof(struct omap_nand_info), GFP_KERNEL); + info = devm_kzalloc(&pdev->dev, sizeof(struct omap_nand_info), + GFP_KERNEL); if (!info) return -ENOMEM; @@ -1846,47 +1652,30 @@ static int omap_nand_probe(struct platform_device *pdev) spin_lock_init(&info->controller.lock); init_waitqueue_head(&info->controller.wq); - info->pdev = pdev; - + info->pdev = pdev; info->gpmc_cs = pdata->cs; info->reg = pdata->reg; - - info->mtd.priv = &info->nand; - info->mtd.name = dev_name(&pdev->dev); - info->mtd.owner = THIS_MODULE; - - info->nand.options = pdata->devsize; - info->nand.options |= NAND_SKIP_BBTSCAN; -#ifdef CONFIG_MTD_NAND_OMAP_BCH info->of_node = pdata->of_node; -#endif + info->ecc_opt = pdata->ecc_opt; + mtd = &info->mtd; + mtd->priv = &info->nand; + mtd->name = dev_name(&pdev->dev); + mtd->owner = THIS_MODULE; + nand_chip = &info->nand; + nand_chip->ecc.priv = NULL; + nand_chip->options |= NAND_SKIP_BBTSCAN; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - err = -EINVAL; - dev_err(&pdev->dev, "error getting memory resource\n"); - goto out_free_info; - } + nand_chip->IO_ADDR_R = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(nand_chip->IO_ADDR_R)) + return PTR_ERR(nand_chip->IO_ADDR_R); info->phys_base = res->start; - info->mem_size = resource_size(res); - - if (!request_mem_region(info->phys_base, info->mem_size, - pdev->dev.driver->name)) { - err = -EBUSY; - goto out_free_info; - } - - info->nand.IO_ADDR_R = ioremap(info->phys_base, info->mem_size); - if (!info->nand.IO_ADDR_R) { - err = -ENOMEM; - goto out_release_mem_region; - } - info->nand.controller = &info->controller; + nand_chip->controller = &info->controller; - info->nand.IO_ADDR_W = info->nand.IO_ADDR_R; - info->nand.cmd_ctrl = omap_hwcontrol; + nand_chip->IO_ADDR_W = nand_chip->IO_ADDR_R; + nand_chip->cmd_ctrl = omap_hwcontrol; /* * If RDY/BSY line is connected to OMAP then use the omap ready @@ -1896,27 +1685,37 @@ static int omap_nand_probe(struct platform_device *pdev) * device and read status register until you get a failure or success */ if (pdata->dev_ready) { - info->nand.dev_ready = omap_dev_ready; - info->nand.chip_delay = 0; + nand_chip->dev_ready = omap_dev_ready; + nand_chip->chip_delay = 0; } else { - info->nand.waitfunc = omap_wait; - info->nand.chip_delay = 50; + nand_chip->waitfunc = omap_wait; + nand_chip->chip_delay = 50; + } + + /* scan NAND device connected to chip controller */ + nand_chip->options |= pdata->devsize & NAND_BUSWIDTH_16; + if (nand_scan_ident(mtd, 1, NULL)) { + pr_err("nand device scan failed, may be bus-width mismatch\n"); + err = -ENXIO; + goto return_error; + } + + /* check for small page devices */ + if ((mtd->oobsize < 64) && (pdata->ecc_opt != OMAP_ECC_HAM1_CODE_HW)) { + pr_err("small page devices are not supported\n"); + err = -EINVAL; + goto return_error; } + /* re-populate low-level callbacks based on xfer modes */ switch (pdata->xfer_type) { case NAND_OMAP_PREFETCH_POLLED: - info->nand.read_buf = omap_read_buf_pref; - info->nand.write_buf = omap_write_buf_pref; + nand_chip->read_buf = omap_read_buf_pref; + nand_chip->write_buf = omap_write_buf_pref; break; case NAND_OMAP_POLLED: - if (info->nand.options & NAND_BUSWIDTH_16) { - info->nand.read_buf = omap_read_buf16; - info->nand.write_buf = omap_write_buf16; - } else { - info->nand.read_buf = omap_read_buf8; - info->nand.write_buf = omap_write_buf8; - } + /* Use nand_base defaults for {read,write}_buf */ break; case NAND_OMAP_PREFETCH_DMA: @@ -1927,7 +1726,7 @@ static int omap_nand_probe(struct platform_device *pdev) if (!info->dma) { dev_err(&pdev->dev, "DMA engine request failed\n"); err = -ENXIO; - goto out_release_mem_region; + goto return_error; } else { struct dma_slave_config cfg; @@ -1942,10 +1741,10 @@ static int omap_nand_probe(struct platform_device *pdev) if (err) { dev_err(&pdev->dev, "DMA engine slave config failed: %d\n", err); - goto out_release_mem_region; + goto return_error; } - info->nand.read_buf = omap_read_buf_dma_pref; - info->nand.write_buf = omap_write_buf_dma_pref; + nand_chip->read_buf = omap_read_buf_dma_pref; + nand_chip->write_buf = omap_write_buf_dma_pref; } break; @@ -1954,34 +1753,36 @@ static int omap_nand_probe(struct platform_device *pdev) if (info->gpmc_irq_fifo <= 0) { dev_err(&pdev->dev, "error getting fifo irq\n"); err = -ENODEV; - goto out_release_mem_region; + goto return_error; } - err = request_irq(info->gpmc_irq_fifo, omap_nand_irq, - IRQF_SHARED, "gpmc-nand-fifo", info); + err = devm_request_irq(&pdev->dev, info->gpmc_irq_fifo, + omap_nand_irq, IRQF_SHARED, + "gpmc-nand-fifo", info); if (err) { dev_err(&pdev->dev, "requesting irq(%d) error:%d", info->gpmc_irq_fifo, err); info->gpmc_irq_fifo = 0; - goto out_release_mem_region; + goto return_error; } info->gpmc_irq_count = platform_get_irq(pdev, 1); if (info->gpmc_irq_count <= 0) { dev_err(&pdev->dev, "error getting count irq\n"); err = -ENODEV; - goto out_release_mem_region; + goto return_error; } - err = request_irq(info->gpmc_irq_count, omap_nand_irq, - IRQF_SHARED, "gpmc-nand-count", info); + err = devm_request_irq(&pdev->dev, info->gpmc_irq_count, + omap_nand_irq, IRQF_SHARED, + "gpmc-nand-count", info); if (err) { dev_err(&pdev->dev, "requesting irq(%d) error:%d", info->gpmc_irq_count, err); info->gpmc_irq_count = 0; - goto out_release_mem_region; + goto return_error; } - info->nand.read_buf = omap_read_buf_irq_pref; - info->nand.write_buf = omap_write_buf_irq_pref; + nand_chip->read_buf = omap_read_buf_irq_pref; + nand_chip->write_buf = omap_write_buf_irq_pref; break; @@ -1989,117 +1790,275 @@ static int omap_nand_probe(struct platform_device *pdev) dev_err(&pdev->dev, "xfer_type(%d) not supported!\n", pdata->xfer_type); err = -EINVAL; - goto out_release_mem_region; + goto return_error; } - /* select the ecc type */ - if (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_DEFAULT) - info->nand.ecc.mode = NAND_ECC_SOFT; - else if ((pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW) || - (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW_ROMCODE)) { - info->nand.ecc.bytes = 3; - info->nand.ecc.size = 512; - info->nand.ecc.strength = 1; - info->nand.ecc.calculate = omap_calculate_ecc; - info->nand.ecc.hwctl = omap_enable_hwecc; - info->nand.ecc.correct = omap_correct_data; - info->nand.ecc.mode = NAND_ECC_HW; - } else if ((pdata->ecc_opt == OMAP_ECC_BCH4_CODE_HW) || - (pdata->ecc_opt == OMAP_ECC_BCH8_CODE_HW)) { - err = omap3_init_bch(&info->mtd, pdata->ecc_opt); - if (err) { + /* populate MTD interface based on ECC scheme */ + nand_chip->ecc.layout = &omap_oobinfo; + ecclayout = &omap_oobinfo; + switch (info->ecc_opt) { + case OMAP_ECC_HAM1_CODE_HW: + pr_info("nand: using OMAP_ECC_HAM1_CODE_HW\n"); + nand_chip->ecc.mode = NAND_ECC_HW; + nand_chip->ecc.bytes = 3; + nand_chip->ecc.size = 512; + nand_chip->ecc.strength = 1; + nand_chip->ecc.calculate = omap_calculate_ecc; + nand_chip->ecc.hwctl = omap_enable_hwecc; + nand_chip->ecc.correct = omap_correct_data; + /* define ECC layout */ + ecclayout->eccbytes = nand_chip->ecc.bytes * + (mtd->writesize / + nand_chip->ecc.size); + if (nand_chip->options & NAND_BUSWIDTH_16) + oob_index = BADBLOCK_MARKER_LENGTH; + else + oob_index = 1; + for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) + ecclayout->eccpos[i] = oob_index; + /* no reserved-marker in ecclayout for this ecc-scheme */ + ecclayout->oobfree->offset = + ecclayout->eccpos[ecclayout->eccbytes - 1] + 1; + break; + + case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: +#ifdef CONFIG_MTD_NAND_ECC_BCH + pr_info("nand: using OMAP_ECC_BCH4_CODE_HW_DETECTION_SW\n"); + nand_chip->ecc.mode = NAND_ECC_HW; + nand_chip->ecc.size = 512; + nand_chip->ecc.bytes = 7; + nand_chip->ecc.strength = 4; + nand_chip->ecc.hwctl = omap_enable_hwecc_bch; + nand_chip->ecc.correct = nand_bch_correct_data; + nand_chip->ecc.calculate = omap_calculate_ecc_bch; + /* define ECC layout */ + ecclayout->eccbytes = nand_chip->ecc.bytes * + (mtd->writesize / + nand_chip->ecc.size); + oob_index = BADBLOCK_MARKER_LENGTH; + for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) { + ecclayout->eccpos[i] = oob_index; + if (((i + 1) % nand_chip->ecc.bytes) == 0) + oob_index++; + } + /* include reserved-marker in ecclayout->oobfree calculation */ + ecclayout->oobfree->offset = 1 + + ecclayout->eccpos[ecclayout->eccbytes - 1] + 1; + /* software bch library is used for locating errors */ + nand_chip->ecc.priv = nand_bch_init(mtd, + nand_chip->ecc.size, + nand_chip->ecc.bytes, + &nand_chip->ecc.layout); + if (!nand_chip->ecc.priv) { + pr_err("nand: error: unable to use s/w BCH library\n"); err = -EINVAL; - goto out_release_mem_region; } - } + break; +#else + pr_err("nand: error: CONFIG_MTD_NAND_ECC_BCH not enabled\n"); + err = -EINVAL; + goto return_error; +#endif - /* DIP switches on some boards change between 8 and 16 bit - * bus widths for flash. Try the other width if the first try fails. - */ - if (nand_scan_ident(&info->mtd, 1, NULL)) { - info->nand.options ^= NAND_BUSWIDTH_16; - if (nand_scan_ident(&info->mtd, 1, NULL)) { - err = -ENXIO; - goto out_release_mem_region; + case OMAP_ECC_BCH4_CODE_HW: +#ifdef CONFIG_MTD_NAND_OMAP_BCH + pr_info("nand: using OMAP_ECC_BCH4_CODE_HW ECC scheme\n"); + nand_chip->ecc.mode = NAND_ECC_HW; + nand_chip->ecc.size = 512; + /* 14th bit is kept reserved for ROM-code compatibility */ + nand_chip->ecc.bytes = 7 + 1; + nand_chip->ecc.strength = 4; + nand_chip->ecc.hwctl = omap_enable_hwecc_bch; + nand_chip->ecc.correct = omap_elm_correct_data; + nand_chip->ecc.calculate = omap_calculate_ecc_bch; + nand_chip->ecc.read_page = omap_read_page_bch; + nand_chip->ecc.write_page = omap_write_page_bch; + /* define ECC layout */ + ecclayout->eccbytes = nand_chip->ecc.bytes * + (mtd->writesize / + nand_chip->ecc.size); + oob_index = BADBLOCK_MARKER_LENGTH; + for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) + ecclayout->eccpos[i] = oob_index; + /* reserved marker already included in ecclayout->eccbytes */ + ecclayout->oobfree->offset = + ecclayout->eccpos[ecclayout->eccbytes - 1] + 1; + /* This ECC scheme requires ELM H/W block */ + if (is_elm_present(info, pdata->elm_of_node, BCH4_ECC) < 0) { + pr_err("nand: error: could not initialize ELM\n"); + err = -ENODEV; + goto return_error; } - } - - /* rom code layout */ - if (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW_ROMCODE) { + break; +#else + pr_err("nand: error: CONFIG_MTD_NAND_OMAP_BCH not enabled\n"); + err = -EINVAL; + goto return_error; +#endif - if (info->nand.options & NAND_BUSWIDTH_16) - offset = 2; - else { - offset = 1; - info->nand.badblock_pattern = &bb_descrip_flashbased; + case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: +#ifdef CONFIG_MTD_NAND_ECC_BCH + pr_info("nand: using OMAP_ECC_BCH8_CODE_HW_DETECTION_SW\n"); + nand_chip->ecc.mode = NAND_ECC_HW; + nand_chip->ecc.size = 512; + nand_chip->ecc.bytes = 13; + nand_chip->ecc.strength = 8; + nand_chip->ecc.hwctl = omap_enable_hwecc_bch; + nand_chip->ecc.correct = nand_bch_correct_data; + nand_chip->ecc.calculate = omap_calculate_ecc_bch; + /* define ECC layout */ + ecclayout->eccbytes = nand_chip->ecc.bytes * + (mtd->writesize / + nand_chip->ecc.size); + oob_index = BADBLOCK_MARKER_LENGTH; + for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) { + ecclayout->eccpos[i] = oob_index; + if (((i + 1) % nand_chip->ecc.bytes) == 0) + oob_index++; } - omap_oobinfo.eccbytes = 3 * (info->mtd.oobsize/16); - for (i = 0; i < omap_oobinfo.eccbytes; i++) - omap_oobinfo.eccpos[i] = i+offset; - - omap_oobinfo.oobfree->offset = offset + omap_oobinfo.eccbytes; - omap_oobinfo.oobfree->length = info->mtd.oobsize - - (offset + omap_oobinfo.eccbytes); - - info->nand.ecc.layout = &omap_oobinfo; - } else if ((pdata->ecc_opt == OMAP_ECC_BCH4_CODE_HW) || - (pdata->ecc_opt == OMAP_ECC_BCH8_CODE_HW)) { - /* build OOB layout for BCH ECC correction */ - err = omap3_init_bch_tail(&info->mtd); - if (err) { + /* include reserved-marker in ecclayout->oobfree calculation */ + ecclayout->oobfree->offset = 1 + + ecclayout->eccpos[ecclayout->eccbytes - 1] + 1; + /* software bch library is used for locating errors */ + nand_chip->ecc.priv = nand_bch_init(mtd, + nand_chip->ecc.size, + nand_chip->ecc.bytes, + &nand_chip->ecc.layout); + if (!nand_chip->ecc.priv) { + pr_err("nand: error: unable to use s/w BCH library\n"); err = -EINVAL; - goto out_release_mem_region; + goto return_error; + } + break; +#else + pr_err("nand: error: CONFIG_MTD_NAND_ECC_BCH not enabled\n"); + err = -EINVAL; + goto return_error; +#endif + + case OMAP_ECC_BCH8_CODE_HW: +#ifdef CONFIG_MTD_NAND_OMAP_BCH + pr_info("nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme\n"); + nand_chip->ecc.mode = NAND_ECC_HW; + nand_chip->ecc.size = 512; + /* 14th bit is kept reserved for ROM-code compatibility */ + nand_chip->ecc.bytes = 13 + 1; + nand_chip->ecc.strength = 8; + nand_chip->ecc.hwctl = omap_enable_hwecc_bch; + nand_chip->ecc.correct = omap_elm_correct_data; + nand_chip->ecc.calculate = omap_calculate_ecc_bch; + nand_chip->ecc.read_page = omap_read_page_bch; + nand_chip->ecc.write_page = omap_write_page_bch; + /* This ECC scheme requires ELM H/W block */ + err = is_elm_present(info, pdata->elm_of_node, BCH8_ECC); + if (err < 0) { + pr_err("nand: error: could not initialize ELM\n"); + goto return_error; } + /* define ECC layout */ + ecclayout->eccbytes = nand_chip->ecc.bytes * + (mtd->writesize / + nand_chip->ecc.size); + oob_index = BADBLOCK_MARKER_LENGTH; + for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) + ecclayout->eccpos[i] = oob_index; + /* reserved marker already included in ecclayout->eccbytes */ + ecclayout->oobfree->offset = + ecclayout->eccpos[ecclayout->eccbytes - 1] + 1; + break; +#else + pr_err("nand: error: CONFIG_MTD_NAND_OMAP_BCH not enabled\n"); + err = -EINVAL; + goto return_error; +#endif + + case OMAP_ECC_BCH16_CODE_HW: +#ifdef CONFIG_MTD_NAND_OMAP_BCH + pr_info("using OMAP_ECC_BCH16_CODE_HW ECC scheme\n"); + nand_chip->ecc.mode = NAND_ECC_HW; + nand_chip->ecc.size = 512; + nand_chip->ecc.bytes = 26; + nand_chip->ecc.strength = 16; + nand_chip->ecc.hwctl = omap_enable_hwecc_bch; + nand_chip->ecc.correct = omap_elm_correct_data; + nand_chip->ecc.calculate = omap_calculate_ecc_bch; + nand_chip->ecc.read_page = omap_read_page_bch; + nand_chip->ecc.write_page = omap_write_page_bch; + /* This ECC scheme requires ELM H/W block */ + err = is_elm_present(info, pdata->elm_of_node, BCH16_ECC); + if (err < 0) { + pr_err("ELM is required for this ECC scheme\n"); + goto return_error; + } + /* define ECC layout */ + ecclayout->eccbytes = nand_chip->ecc.bytes * + (mtd->writesize / + nand_chip->ecc.size); + oob_index = BADBLOCK_MARKER_LENGTH; + for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) + ecclayout->eccpos[i] = oob_index; + /* reserved marker already included in ecclayout->eccbytes */ + ecclayout->oobfree->offset = + ecclayout->eccpos[ecclayout->eccbytes - 1] + 1; + break; +#else + pr_err("nand: error: CONFIG_MTD_NAND_OMAP_BCH not enabled\n"); + err = -EINVAL; + goto return_error; +#endif + default: + pr_err("nand: error: invalid or unsupported ECC scheme\n"); + err = -EINVAL; + goto return_error; + } + + /* all OOB bytes from oobfree->offset till end off OOB are free */ + ecclayout->oobfree->length = mtd->oobsize - ecclayout->oobfree->offset; + /* check if NAND device's OOB is enough to store ECC signatures */ + if (mtd->oobsize < (ecclayout->eccbytes + BADBLOCK_MARKER_LENGTH)) { + pr_err("not enough OOB bytes required = %d, available=%d\n", + ecclayout->eccbytes, mtd->oobsize); + err = -EINVAL; + goto return_error; } /* second phase scan */ - if (nand_scan_tail(&info->mtd)) { + if (nand_scan_tail(mtd)) { err = -ENXIO; - goto out_release_mem_region; + goto return_error; } ppdata.of_node = pdata->of_node; - mtd_device_parse_register(&info->mtd, NULL, &ppdata, pdata->parts, + mtd_device_parse_register(mtd, NULL, &ppdata, pdata->parts, pdata->nr_parts); - platform_set_drvdata(pdev, &info->mtd); + platform_set_drvdata(pdev, mtd); return 0; -out_release_mem_region: +return_error: if (info->dma) dma_release_channel(info->dma); - if (info->gpmc_irq_count > 0) - free_irq(info->gpmc_irq_count, info); - if (info->gpmc_irq_fifo > 0) - free_irq(info->gpmc_irq_fifo, info); - release_mem_region(info->phys_base, info->mem_size); -out_free_info: - kfree(info); - + if (nand_chip->ecc.priv) { + nand_bch_free(nand_chip->ecc.priv); + nand_chip->ecc.priv = NULL; + } return err; } static int omap_nand_remove(struct platform_device *pdev) { struct mtd_info *mtd = platform_get_drvdata(pdev); + struct nand_chip *nand_chip = mtd->priv; struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, mtd); - omap3_free_bch(&info->mtd); - + if (nand_chip->ecc.priv) { + nand_bch_free(nand_chip->ecc.priv); + nand_chip->ecc.priv = NULL; + } if (info->dma) dma_release_channel(info->dma); - - if (info->gpmc_irq_count > 0) - free_irq(info->gpmc_irq_count, info); - if (info->gpmc_irq_fifo > 0) - free_irq(info->gpmc_irq_fifo, info); - - /* Release NAND device, its internal structures and partitions */ - nand_release(&info->mtd); - iounmap(info->nand.IO_ADDR_R); - release_mem_region(info->phys_base, info->mem_size); - kfree(info); + nand_release(mtd); return 0; } diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c index a393a5b6ce1..471b4df3a5a 100644 --- a/drivers/mtd/nand/orion_nand.c +++ b/drivers/mtd/nand/orion_nand.c @@ -87,7 +87,6 @@ static int __init orion_nand_probe(struct platform_device *pdev) nc = kzalloc(sizeof(struct nand_chip) + sizeof(struct mtd_info), GFP_KERNEL); if (!nc) { - printk(KERN_ERR "orion_nand: failed to allocate device structure.\n"); ret = -ENOMEM; goto no_res; } @@ -101,7 +100,7 @@ static int __init orion_nand_probe(struct platform_device *pdev) io_base = ioremap(res->start, resource_size(res)); if (!io_base) { - printk(KERN_ERR "orion_nand: ioremap failed\n"); + dev_err(&pdev->dev, "ioremap failed\n"); ret = -EIO; goto no_res; } @@ -110,7 +109,6 @@ static int __init orion_nand_probe(struct platform_device *pdev) board = devm_kzalloc(&pdev->dev, sizeof(struct orion_nand_data), GFP_KERNEL); if (!board) { - printk(KERN_ERR "orion_nand: failed to allocate board structure.\n"); ret = -ENOMEM; goto no_res; } @@ -216,7 +214,7 @@ static int orion_nand_remove(struct platform_device *pdev) } #ifdef CONFIG_OF -static struct of_device_id orion_nand_of_match_table[] = { +static const struct of_device_id orion_nand_of_match_table[] = { { .compatible = "marvell,orion-nand", }, {}, }; diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c index 5a67082c07e..2c98f9da747 100644 --- a/drivers/mtd/nand/pasemi_nand.c +++ b/drivers/mtd/nand/pasemi_nand.c @@ -23,11 +23,12 @@ #undef DEBUG #include <linux/slab.h> -#include <linux/init.h> #include <linux/module.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/nand_ecc.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/pci.h> @@ -221,7 +222,7 @@ MODULE_DEVICE_TABLE(of, pasemi_nand_match); static struct platform_driver pasemi_nand_driver = { .driver = { - .name = (char*)driver_name, + .name = driver_name, .owner = THIS_MODULE, .of_match_table = pasemi_nand_match, }, diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c index cad4cdc9df3..0b068a5c0bf 100644 --- a/drivers/mtd/nand/plat_nand.c +++ b/drivers/mtd/nand/plat_nand.c @@ -9,6 +9,7 @@ * */ +#include <linux/err.h> #include <linux/io.h> #include <linux/module.h> #include <linux/platform_device.h> @@ -47,30 +48,16 @@ static int plat_nand_probe(struct platform_device *pdev) return -EINVAL; } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENXIO; - /* Allocate memory for the device structure (and zero it) */ - data = kzalloc(sizeof(struct plat_nand_data), GFP_KERNEL); - if (!data) { - dev_err(&pdev->dev, "failed to allocate device structure.\n"); + data = devm_kzalloc(&pdev->dev, sizeof(struct plat_nand_data), + GFP_KERNEL); + if (!data) return -ENOMEM; - } - - if (!request_mem_region(res->start, resource_size(res), - dev_name(&pdev->dev))) { - dev_err(&pdev->dev, "request_mem_region failed\n"); - err = -EBUSY; - goto out_free; - } - data->io_base = ioremap(res->start, resource_size(res)); - if (data->io_base == NULL) { - dev_err(&pdev->dev, "ioremap failed\n"); - err = -EIO; - goto out_release_io; - } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + data->io_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(data->io_base)) + return PTR_ERR(data->io_base); data->chip.priv = &data; data->mtd.priv = &data->chip; @@ -122,11 +109,6 @@ static int plat_nand_probe(struct platform_device *pdev) out: if (pdata->ctrl.remove) pdata->ctrl.remove(pdev); - iounmap(data->io_base); -out_release_io: - release_mem_region(res->start, resource_size(res)); -out_free: - kfree(data); return err; } @@ -137,16 +119,10 @@ static int plat_nand_remove(struct platform_device *pdev) { struct plat_nand_data *data = platform_get_drvdata(pdev); struct platform_nand_data *pdata = dev_get_platdata(&pdev->dev); - struct resource *res; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); nand_release(&data->mtd); if (pdata->ctrl.remove) pdata->ctrl.remove(pdev); - iounmap(data->io_base); - release_mem_region(res->start, resource_size(res)); - kfree(data); return 0; } diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index dd03dfdfb0d..96b0b1d27df 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -7,6 +7,8 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. + * + * See Documentation/mtd/nand/pxa3xx-nand.txt for more details. */ #include <linux/kernel.h> @@ -24,6 +26,7 @@ #include <linux/slab.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/of_mtd.h> #if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP) #define ARCH_HAS_DMA @@ -39,6 +42,13 @@ #define NAND_STOP_DELAY (2 * HZ/50) #define PAGE_CHUNK_SIZE (2048) +/* + * Define a buffer size for the initial command that detects the flash device: + * STATUS, READID and PARAM. The largest of these is the PARAM command, + * needing 256 bytes. + */ +#define INIT_BUFFER_SIZE 256 + /* registers and bit definitions */ #define NDCR (0x00) /* Control register */ #define NDTR0CS0 (0x04) /* Timing Parameter 0 for CS0 */ @@ -47,6 +57,7 @@ #define NDPCR (0x18) /* Page Count Register */ #define NDBDR0 (0x1C) /* Bad Block Register 0 */ #define NDBDR1 (0x20) /* Bad Block Register 1 */ +#define NDECCCTRL (0x28) /* ECC control */ #define NDDB (0x40) /* Data Buffer */ #define NDCB0 (0x48) /* Command Buffer0 */ #define NDCB1 (0x4C) /* Command Buffer1 */ @@ -73,6 +84,9 @@ #define NDCR_INT_MASK (0xFFF) #define NDSR_MASK (0xfff) +#define NDSR_ERR_CNT_OFF (16) +#define NDSR_ERR_CNT_MASK (0x1f) +#define NDSR_ERR_CNT(sr) ((sr >> NDSR_ERR_CNT_OFF) & NDSR_ERR_CNT_MASK) #define NDSR_RDY (0x1 << 12) #define NDSR_FLASH_RDY (0x1 << 11) #define NDSR_CS0_PAGED (0x1 << 10) @@ -81,8 +95,8 @@ #define NDSR_CS1_CMDD (0x1 << 7) #define NDSR_CS0_BBD (0x1 << 6) #define NDSR_CS1_BBD (0x1 << 5) -#define NDSR_DBERR (0x1 << 4) -#define NDSR_SBERR (0x1 << 3) +#define NDSR_UNCORERR (0x1 << 4) +#define NDSR_CORERR (0x1 << 3) #define NDSR_WRDREQ (0x1 << 2) #define NDSR_RDDREQ (0x1 << 1) #define NDSR_WRCMDREQ (0x1) @@ -91,6 +105,8 @@ #define NDCB0_ST_ROW_EN (0x1 << 26) #define NDCB0_AUTO_RS (0x1 << 25) #define NDCB0_CSEL (0x1 << 24) +#define NDCB0_EXT_CMD_TYPE_MASK (0x7 << 29) +#define NDCB0_EXT_CMD_TYPE(x) (((x) << 29) & NDCB0_EXT_CMD_TYPE_MASK) #define NDCB0_CMD_TYPE_MASK (0x7 << 21) #define NDCB0_CMD_TYPE(x) (((x) << 21) & NDCB0_CMD_TYPE_MASK) #define NDCB0_NC (0x1 << 20) @@ -101,21 +117,29 @@ #define NDCB0_CMD1_MASK (0xff) #define NDCB0_ADDR_CYC_SHIFT (16) +#define EXT_CMD_TYPE_DISPATCH 6 /* Command dispatch */ +#define EXT_CMD_TYPE_NAKED_RW 5 /* Naked read or Naked write */ +#define EXT_CMD_TYPE_READ 4 /* Read */ +#define EXT_CMD_TYPE_DISP_WR 4 /* Command dispatch with write */ +#define EXT_CMD_TYPE_FINAL 3 /* Final command */ +#define EXT_CMD_TYPE_LAST_RW 1 /* Last naked read/write */ +#define EXT_CMD_TYPE_MONO 0 /* Monolithic read/write */ + /* macros for registers read/write */ #define nand_writel(info, off, val) \ - __raw_writel((val), (info)->mmio_base + (off)) + writel_relaxed((val), (info)->mmio_base + (off)) #define nand_readl(info, off) \ - __raw_readl((info)->mmio_base + (off)) + readl_relaxed((info)->mmio_base + (off)) /* error code and state */ enum { ERR_NONE = 0, ERR_DMABUSERR = -1, ERR_SENDCMD = -2, - ERR_DBERR = -3, + ERR_UNCORERR = -3, ERR_BBERR = -4, - ERR_SBERR = -5, + ERR_CORERR = -5, }; enum { @@ -142,7 +166,6 @@ struct pxa3xx_nand_host { void *info_data; /* page size of attached chip */ - unsigned int page_size; int use_ecc; int cs; @@ -160,10 +183,13 @@ struct pxa3xx_nand_info { struct clk *clk; void __iomem *mmio_base; unsigned long mmio_phys; - struct completion cmd_complete; + struct completion cmd_complete, dev_ready; unsigned int buf_start; unsigned int buf_count; + unsigned int buf_size; + unsigned int data_buff_pos; + unsigned int oob_buff_pos; /* DMA information */ int drcmr_dat; @@ -187,13 +213,18 @@ struct pxa3xx_nand_info { int cs; int use_ecc; /* use HW ECC ? */ + int ecc_bch; /* using BCH ECC? */ int use_dma; /* use DMA ? */ int use_spare; /* use spare ? */ - int is_ready; + int need_wait; - unsigned int page_size; /* page size of attached chip */ - unsigned int data_size; /* data size in FIFO */ + unsigned int data_size; /* data to be read from FIFO */ + unsigned int chunk_size; /* split commands chunk size */ unsigned int oob_size; + unsigned int spare_size; + unsigned int ecc_size; + unsigned int ecc_err_cnt; + unsigned int max_bitflips; int retcode; /* cached register value */ @@ -231,6 +262,64 @@ static struct pxa3xx_nand_flash builtin_flash_types[] = { { "256MiB 16-bit", 0xba20, 64, 2048, 16, 16, 2048, &timing[3] }, }; +static u8 bbt_pattern[] = {'M', 'V', 'B', 'b', 't', '0' }; +static u8 bbt_mirror_pattern[] = {'1', 't', 'b', 'B', 'V', 'M' }; + +static struct nand_bbt_descr bbt_main_descr = { + .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE + | NAND_BBT_2BIT | NAND_BBT_VERSION, + .offs = 8, + .len = 6, + .veroffs = 14, + .maxblocks = 8, /* Last 8 blocks in each chip */ + .pattern = bbt_pattern +}; + +static struct nand_bbt_descr bbt_mirror_descr = { + .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE + | NAND_BBT_2BIT | NAND_BBT_VERSION, + .offs = 8, + .len = 6, + .veroffs = 14, + .maxblocks = 8, /* Last 8 blocks in each chip */ + .pattern = bbt_mirror_pattern +}; + +static struct nand_ecclayout ecc_layout_2KB_bch4bit = { + .eccbytes = 32, + .eccpos = { + 32, 33, 34, 35, 36, 37, 38, 39, + 40, 41, 42, 43, 44, 45, 46, 47, + 48, 49, 50, 51, 52, 53, 54, 55, + 56, 57, 58, 59, 60, 61, 62, 63}, + .oobfree = { {2, 30} } +}; + +static struct nand_ecclayout ecc_layout_4KB_bch4bit = { + .eccbytes = 64, + .eccpos = { + 32, 33, 34, 35, 36, 37, 38, 39, + 40, 41, 42, 43, 44, 45, 46, 47, + 48, 49, 50, 51, 52, 53, 54, 55, + 56, 57, 58, 59, 60, 61, 62, 63, + 96, 97, 98, 99, 100, 101, 102, 103, + 104, 105, 106, 107, 108, 109, 110, 111, + 112, 113, 114, 115, 116, 117, 118, 119, + 120, 121, 122, 123, 124, 125, 126, 127}, + /* Bootrom looks in bytes 0 & 5 for bad blocks */ + .oobfree = { {6, 26}, { 64, 32} } +}; + +static struct nand_ecclayout ecc_layout_4KB_bch8bit = { + .eccbytes = 128, + .eccpos = { + 32, 33, 34, 35, 36, 37, 38, 39, + 40, 41, 42, 43, 44, 45, 46, 47, + 48, 49, 50, 51, 52, 53, 54, 55, + 56, 57, 58, 59, 60, 61, 62, 63}, + .oobfree = { } +}; + /* Define a default flash type setting serve as flash detecting only */ #define DEFAULT_FLASH_TYPE (&builtin_flash_types[0]) @@ -248,6 +337,29 @@ static struct pxa3xx_nand_flash builtin_flash_types[] = { /* convert nano-seconds to nand flash controller clock cycles */ #define ns2cycle(ns, clk) (int)((ns) * (clk / 1000000) / 1000) +static const struct of_device_id pxa3xx_nand_dt_ids[] = { + { + .compatible = "marvell,pxa3xx-nand", + .data = (void *)PXA3XX_NAND_VARIANT_PXA, + }, + { + .compatible = "marvell,armada370-nand", + .data = (void *)PXA3XX_NAND_VARIANT_ARMADA370, + }, + {} +}; +MODULE_DEVICE_TABLE(of, pxa3xx_nand_dt_ids); + +static enum pxa3xx_nand_variant +pxa3xx_nand_get_variant(struct platform_device *pdev) +{ + const struct of_device_id *of_id = + of_match_device(pxa3xx_nand_dt_ids, &pdev->dev); + if (!of_id) + return PXA3XX_NAND_VARIANT_PXA; + return (enum pxa3xx_nand_variant)of_id->data; +} + static void pxa3xx_nand_set_timing(struct pxa3xx_nand_host *host, const struct pxa3xx_nand_timing *t) { @@ -272,25 +384,23 @@ static void pxa3xx_nand_set_timing(struct pxa3xx_nand_host *host, nand_writel(info, NDTR1CS0, ndtr1); } -static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info) +/* + * Set the data and OOB size, depending on the selected + * spare and ECC configuration. + * Only applicable to READ0, READOOB and PAGEPROG commands. + */ +static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info, + struct mtd_info *mtd) { - struct pxa3xx_nand_host *host = info->host[info->cs]; int oob_enable = info->reg_ndcr & NDCR_SPARE_EN; - info->data_size = host->page_size; - if (!oob_enable) { - info->oob_size = 0; + info->data_size = mtd->writesize; + if (!oob_enable) return; - } - switch (host->page_size) { - case 2048: - info->oob_size = (info->use_ecc) ? 40 : 64; - break; - case 512: - info->oob_size = (info->use_ecc) ? 8 : 16; - break; - } + info->oob_size = info->spare_size; + if (!info->use_ecc) + info->oob_size += info->ecc_size; } /** @@ -305,10 +415,15 @@ static void pxa3xx_nand_start(struct pxa3xx_nand_info *info) ndcr = info->reg_ndcr; - if (info->use_ecc) + if (info->use_ecc) { ndcr |= NDCR_ECC_EN; - else + if (info->ecc_bch) + nand_writel(info, NDECCCTRL, 0x1); + } else { ndcr &= ~NDCR_ECC_EN; + if (info->ecc_bch) + nand_writel(info, NDECCCTRL, 0x0); + } if (info->use_dma) ndcr |= NDCR_DMA_EN; @@ -367,26 +482,39 @@ static void disable_int(struct pxa3xx_nand_info *info, uint32_t int_mask) static void handle_data_pio(struct pxa3xx_nand_info *info) { + unsigned int do_bytes = min(info->data_size, info->chunk_size); + switch (info->state) { case STATE_PIO_WRITING: - __raw_writesl(info->mmio_base + NDDB, info->data_buff, - DIV_ROUND_UP(info->data_size, 4)); + __raw_writesl(info->mmio_base + NDDB, + info->data_buff + info->data_buff_pos, + DIV_ROUND_UP(do_bytes, 4)); + if (info->oob_size > 0) - __raw_writesl(info->mmio_base + NDDB, info->oob_buff, - DIV_ROUND_UP(info->oob_size, 4)); + __raw_writesl(info->mmio_base + NDDB, + info->oob_buff + info->oob_buff_pos, + DIV_ROUND_UP(info->oob_size, 4)); break; case STATE_PIO_READING: - __raw_readsl(info->mmio_base + NDDB, info->data_buff, - DIV_ROUND_UP(info->data_size, 4)); + __raw_readsl(info->mmio_base + NDDB, + info->data_buff + info->data_buff_pos, + DIV_ROUND_UP(do_bytes, 4)); + if (info->oob_size > 0) - __raw_readsl(info->mmio_base + NDDB, info->oob_buff, - DIV_ROUND_UP(info->oob_size, 4)); + __raw_readsl(info->mmio_base + NDDB, + info->oob_buff + info->oob_buff_pos, + DIV_ROUND_UP(info->oob_size, 4)); break; default: dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__, info->state); BUG(); } + + /* Update buffer pointers for multi-page read/write */ + info->data_buff_pos += do_bytes; + info->oob_buff_pos += info->oob_size; + info->data_size -= do_bytes; } #ifdef ARCH_HAS_DMA @@ -444,7 +572,7 @@ static void start_data_dma(struct pxa3xx_nand_info *info) static irqreturn_t pxa3xx_nand_irq(int irq, void *devid) { struct pxa3xx_nand_info *info = devid; - unsigned int status, is_completed = 0; + unsigned int status, is_completed = 0, is_ready = 0; unsigned int ready, cmd_done; if (info->cs == 0) { @@ -457,10 +585,25 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid) status = nand_readl(info, NDSR); - if (status & NDSR_DBERR) - info->retcode = ERR_DBERR; - if (status & NDSR_SBERR) - info->retcode = ERR_SBERR; + if (status & NDSR_UNCORERR) + info->retcode = ERR_UNCORERR; + if (status & NDSR_CORERR) { + info->retcode = ERR_CORERR; + if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 && + info->ecc_bch) + info->ecc_err_cnt = NDSR_ERR_CNT(status); + else + info->ecc_err_cnt = 1; + + /* + * Each chunk composing a page is corrected independently, + * and we need to store maximum number of corrected bitflips + * to return it to the MTD layer in ecc.read_page(). + */ + info->max_bitflips = max_t(unsigned int, + info->max_bitflips, + info->ecc_err_cnt); + } if (status & (NDSR_RDDREQ | NDSR_WRDREQ)) { /* whether use dma to transfer data */ if (info->use_dma) { @@ -480,8 +623,8 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid) is_completed = 1; } if (status & ready) { - info->is_ready = 1; info->state = STATE_READY; + is_ready = 1; } if (status & NDSR_WRCMDREQ) { @@ -510,6 +653,8 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid) nand_writel(info, NDSR, status); if (is_completed) complete(&info->cmd_complete); + if (is_ready) + complete(&info->dev_ready); NORMAL_IRQ_EXIT: return IRQ_HANDLED; } @@ -522,52 +667,94 @@ static inline int is_buf_blank(uint8_t *buf, size_t len) return 1; } -static int prepare_command_pool(struct pxa3xx_nand_info *info, int command, - uint16_t column, int page_addr) +static void set_command_address(struct pxa3xx_nand_info *info, + unsigned int page_size, uint16_t column, int page_addr) { - int addr_cycle, exec_cmd; - struct pxa3xx_nand_host *host; - struct mtd_info *mtd; + /* small page addr setting */ + if (page_size < PAGE_CHUNK_SIZE) { + info->ndcb1 = ((page_addr & 0xFFFFFF) << 8) + | (column & 0xFF); - host = info->host[info->cs]; - mtd = host->mtd; - addr_cycle = 0; - exec_cmd = 1; + info->ndcb2 = 0; + } else { + info->ndcb1 = ((page_addr & 0xFFFF) << 16) + | (column & 0xFFFF); + + if (page_addr & 0xFF0000) + info->ndcb2 = (page_addr & 0xFF0000) >> 16; + else + info->ndcb2 = 0; + } +} + +static void prepare_start_command(struct pxa3xx_nand_info *info, int command) +{ + struct pxa3xx_nand_host *host = info->host[info->cs]; + struct mtd_info *mtd = host->mtd; /* reset data and oob column point to handle data */ info->buf_start = 0; info->buf_count = 0; info->oob_size = 0; + info->data_buff_pos = 0; + info->oob_buff_pos = 0; info->use_ecc = 0; info->use_spare = 1; - info->use_dma = (use_dma) ? 1 : 0; - info->is_ready = 0; info->retcode = ERR_NONE; - if (info->cs != 0) - info->ndcb0 = NDCB0_CSEL; - else - info->ndcb0 = 0; + info->ecc_err_cnt = 0; + info->ndcb3 = 0; + info->need_wait = 0; switch (command) { case NAND_CMD_READ0: case NAND_CMD_PAGEPROG: info->use_ecc = 1; case NAND_CMD_READOOB: - pxa3xx_set_datasize(info); + pxa3xx_set_datasize(info, mtd); break; case NAND_CMD_PARAM: info->use_spare = 0; break; - case NAND_CMD_SEQIN: - exec_cmd = 0; - break; default: info->ndcb1 = 0; info->ndcb2 = 0; - info->ndcb3 = 0; break; } + /* + * If we are about to issue a read command, or about to set + * the write address, then clean the data buffer. + */ + if (command == NAND_CMD_READ0 || + command == NAND_CMD_READOOB || + command == NAND_CMD_SEQIN) { + + info->buf_count = mtd->writesize + mtd->oobsize; + memset(info->data_buff, 0xFF, info->buf_count); + } + +} + +static int prepare_set_command(struct pxa3xx_nand_info *info, int command, + int ext_cmd_type, uint16_t column, int page_addr) +{ + int addr_cycle, exec_cmd; + struct pxa3xx_nand_host *host; + struct mtd_info *mtd; + + host = info->host[info->cs]; + mtd = host->mtd; + addr_cycle = 0; + exec_cmd = 1; + + if (info->cs != 0) + info->ndcb0 = NDCB0_CSEL; + else + info->ndcb0 = 0; + + if (command == NAND_CMD_SEQIN) + exec_cmd = 0; + addr_cycle = NDCB0_ADDR_CYC(host->row_addr_cycles + host->col_addr_cycles); @@ -582,30 +769,42 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command, if (command == NAND_CMD_READOOB) info->buf_start += mtd->writesize; - /* Second command setting for large pages */ - if (host->page_size >= PAGE_CHUNK_SIZE) + /* + * Multiple page read needs an 'extended command type' field, + * which is either naked-read or last-read according to the + * state. + */ + if (mtd->writesize == PAGE_CHUNK_SIZE) { info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8); + } else if (mtd->writesize > PAGE_CHUNK_SIZE) { + info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8) + | NDCB0_LEN_OVRD + | NDCB0_EXT_CMD_TYPE(ext_cmd_type); + info->ndcb3 = info->chunk_size + + info->oob_size; + } + + set_command_address(info, mtd->writesize, column, page_addr); + break; case NAND_CMD_SEQIN: - /* small page addr setting */ - if (unlikely(host->page_size < PAGE_CHUNK_SIZE)) { - info->ndcb1 = ((page_addr & 0xFFFFFF) << 8) - | (column & 0xFF); - info->ndcb2 = 0; - } else { - info->ndcb1 = ((page_addr & 0xFFFF) << 16) - | (column & 0xFFFF); + info->buf_start = column; + set_command_address(info, mtd->writesize, 0, page_addr); - if (page_addr & 0xFF0000) - info->ndcb2 = (page_addr & 0xFF0000) >> 16; - else - info->ndcb2 = 0; + /* + * Multiple page programming needs to execute the initial + * SEQIN command that sets the page address. + */ + if (mtd->writesize > PAGE_CHUNK_SIZE) { + info->ndcb0 |= NDCB0_CMD_TYPE(0x1) + | NDCB0_EXT_CMD_TYPE(ext_cmd_type) + | addr_cycle + | command; + /* No data transfer in this case */ + info->data_size = 0; + exec_cmd = 1; } - - info->buf_count = mtd->writesize + mtd->oobsize; - memset(info->data_buff, 0xFF, info->buf_count); - break; case NAND_CMD_PAGEPROG: @@ -615,13 +814,40 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command, break; } - info->ndcb0 |= NDCB0_CMD_TYPE(0x1) - | NDCB0_AUTO_RS - | NDCB0_ST_ROW_EN - | NDCB0_DBC - | (NAND_CMD_PAGEPROG << 8) - | NAND_CMD_SEQIN - | addr_cycle; + /* Second command setting for large pages */ + if (mtd->writesize > PAGE_CHUNK_SIZE) { + /* + * Multiple page write uses the 'extended command' + * field. This can be used to issue a command dispatch + * or a naked-write depending on the current stage. + */ + info->ndcb0 |= NDCB0_CMD_TYPE(0x1) + | NDCB0_LEN_OVRD + | NDCB0_EXT_CMD_TYPE(ext_cmd_type); + info->ndcb3 = info->chunk_size + + info->oob_size; + + /* + * This is the command dispatch that completes a chunked + * page program operation. + */ + if (info->data_size == 0) { + info->ndcb0 = NDCB0_CMD_TYPE(0x1) + | NDCB0_EXT_CMD_TYPE(ext_cmd_type) + | command; + info->ndcb1 = 0; + info->ndcb2 = 0; + info->ndcb3 = 0; + } + } else { + info->ndcb0 |= NDCB0_CMD_TYPE(0x1) + | NDCB0_AUTO_RS + | NDCB0_ST_ROW_EN + | NDCB0_DBC + | (NAND_CMD_PAGEPROG << 8) + | NAND_CMD_SEQIN + | addr_cycle; + } break; case NAND_CMD_PARAM: @@ -684,8 +910,8 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command, return exec_cmd; } -static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command, - int column, int page_addr) +static void nand_cmdfunc(struct mtd_info *mtd, unsigned command, + int column, int page_addr) { struct pxa3xx_nand_host *host = mtd->priv; struct pxa3xx_nand_info *info = host->info_data; @@ -710,10 +936,15 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command, nand_writel(info, NDTR1CS0, info->ndtr1cs0); } + prepare_start_command(info, command); + info->state = STATE_PREPARED; - exec_cmd = prepare_command_pool(info, command, column, page_addr); + exec_cmd = prepare_set_command(info, command, 0, column, page_addr); + if (exec_cmd) { init_completion(&info->cmd_complete); + init_completion(&info->dev_ready); + info->need_wait = 1; pxa3xx_nand_start(info); ret = wait_for_completion_timeout(&info->cmd_complete, @@ -727,6 +958,117 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command, info->state = STATE_IDLE; } +static void nand_cmdfunc_extended(struct mtd_info *mtd, + const unsigned command, + int column, int page_addr) +{ + struct pxa3xx_nand_host *host = mtd->priv; + struct pxa3xx_nand_info *info = host->info_data; + int ret, exec_cmd, ext_cmd_type; + + /* + * if this is a x16 device then convert the input + * "byte" address into a "word" address appropriate + * for indexing a word-oriented device + */ + if (info->reg_ndcr & NDCR_DWIDTH_M) + column /= 2; + + /* + * There may be different NAND chip hooked to + * different chip select, so check whether + * chip select has been changed, if yes, reset the timing + */ + if (info->cs != host->cs) { + info->cs = host->cs; + nand_writel(info, NDTR0CS0, info->ndtr0cs0); + nand_writel(info, NDTR1CS0, info->ndtr1cs0); + } + + /* Select the extended command for the first command */ + switch (command) { + case NAND_CMD_READ0: + case NAND_CMD_READOOB: + ext_cmd_type = EXT_CMD_TYPE_MONO; + break; + case NAND_CMD_SEQIN: + ext_cmd_type = EXT_CMD_TYPE_DISPATCH; + break; + case NAND_CMD_PAGEPROG: + ext_cmd_type = EXT_CMD_TYPE_NAKED_RW; + break; + default: + ext_cmd_type = 0; + break; + } + + prepare_start_command(info, command); + + /* + * Prepare the "is ready" completion before starting a command + * transaction sequence. If the command is not executed the + * completion will be completed, see below. + * + * We can do that inside the loop because the command variable + * is invariant and thus so is the exec_cmd. + */ + info->need_wait = 1; + init_completion(&info->dev_ready); + do { + info->state = STATE_PREPARED; + exec_cmd = prepare_set_command(info, command, ext_cmd_type, + column, page_addr); + if (!exec_cmd) { + info->need_wait = 0; + complete(&info->dev_ready); + break; + } + + init_completion(&info->cmd_complete); + pxa3xx_nand_start(info); + + ret = wait_for_completion_timeout(&info->cmd_complete, + CHIP_DELAY_TIMEOUT); + if (!ret) { + dev_err(&info->pdev->dev, "Wait time out!!!\n"); + /* Stop State Machine for next command cycle */ + pxa3xx_nand_stop(info); + break; + } + + /* Check if the sequence is complete */ + if (info->data_size == 0 && command != NAND_CMD_PAGEPROG) + break; + + /* + * After a splitted program command sequence has issued + * the command dispatch, the command sequence is complete. + */ + if (info->data_size == 0 && + command == NAND_CMD_PAGEPROG && + ext_cmd_type == EXT_CMD_TYPE_DISPATCH) + break; + + if (command == NAND_CMD_READ0 || command == NAND_CMD_READOOB) { + /* Last read: issue a 'last naked read' */ + if (info->data_size == info->chunk_size) + ext_cmd_type = EXT_CMD_TYPE_LAST_RW; + else + ext_cmd_type = EXT_CMD_TYPE_NAKED_RW; + + /* + * If a splitted program command has no more data to transfer, + * the command dispatch must be issued to complete. + */ + } else if (command == NAND_CMD_PAGEPROG && + info->data_size == 0) { + ext_cmd_type = EXT_CMD_TYPE_DISPATCH; + } + } while (1); + + info->state = STATE_IDLE; +} + static int pxa3xx_nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required) { @@ -746,20 +1088,14 @@ static int pxa3xx_nand_read_page_hwecc(struct mtd_info *mtd, chip->read_buf(mtd, buf, mtd->writesize); chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); - if (info->retcode == ERR_SBERR) { - switch (info->use_ecc) { - case 1: - mtd->ecc_stats.corrected++; - break; - case 0: - default: - break; - } - } else if (info->retcode == ERR_DBERR) { + if (info->retcode == ERR_CORERR && info->use_ecc) { + mtd->ecc_stats.corrected += info->ecc_err_cnt; + + } else if (info->retcode == ERR_UNCORERR) { /* * for blank page (all 0xff), HW will calculate its ECC as * 0, which is different from the ECC information within - * OOB, ignore such double bit errors + * OOB, ignore such uncorrectable errors */ if (is_buf_blank(buf, mtd->writesize)) info->retcode = ERR_NONE; @@ -767,7 +1103,7 @@ static int pxa3xx_nand_read_page_hwecc(struct mtd_info *mtd, mtd->ecc_stats.failed++; } - return 0; + return info->max_bitflips; } static uint8_t pxa3xx_nand_read_byte(struct mtd_info *mtd) @@ -826,21 +1162,27 @@ static int pxa3xx_nand_waitfunc(struct mtd_info *mtd, struct nand_chip *this) { struct pxa3xx_nand_host *host = mtd->priv; struct pxa3xx_nand_info *info = host->info_data; + int ret; + + if (info->need_wait) { + ret = wait_for_completion_timeout(&info->dev_ready, + CHIP_DELAY_TIMEOUT); + info->need_wait = 0; + if (!ret) { + dev_err(&info->pdev->dev, "Ready time out!!!\n"); + return NAND_STATUS_FAIL; + } + } /* pxa3xx_nand_send_command has waited for command complete */ if (this->state == FL_WRITING || this->state == FL_ERASING) { if (info->retcode == ERR_NONE) return 0; - else { - /* - * any error make it return 0x01 which will tell - * the caller the erase and write fail - */ - return 0x01; - } + else + return NAND_STATUS_FAIL; } - return 0; + return NAND_STATUS_READY; } static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info, @@ -862,7 +1204,6 @@ static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info, } /* calculate flash information */ - host->page_size = f->page_size; host->read_id_bytes = (f->page_size == 2048) ? 4 : 2; /* calculate addressing information */ @@ -899,39 +1240,35 @@ static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info) uint32_t ndcr = nand_readl(info, NDCR); if (ndcr & NDCR_PAGE_SZ) { - host->page_size = 2048; + /* Controller's FIFO size */ + info->chunk_size = 2048; host->read_id_bytes = 4; } else { - host->page_size = 512; + info->chunk_size = 512; host->read_id_bytes = 2; } + /* Set an initial chunk size */ info->reg_ndcr = ndcr & ~NDCR_INT_MASK; info->ndtr0cs0 = nand_readl(info, NDTR0CS0); info->ndtr1cs0 = nand_readl(info, NDTR1CS0); return 0; } -/* the maximum possible buffer size for large page with OOB data - * is: 2048 + 64 = 2112 bytes, allocate a page here for both the - * data buffer and the DMA descriptor - */ -#define MAX_BUFF_SIZE PAGE_SIZE - #ifdef ARCH_HAS_DMA static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info) { struct platform_device *pdev = info->pdev; - int data_desc_offset = MAX_BUFF_SIZE - sizeof(struct pxa_dma_desc); + int data_desc_offset = info->buf_size - sizeof(struct pxa_dma_desc); if (use_dma == 0) { - info->data_buff = kmalloc(MAX_BUFF_SIZE, GFP_KERNEL); + info->data_buff = kmalloc(info->buf_size, GFP_KERNEL); if (info->data_buff == NULL) return -ENOMEM; return 0; } - info->data_buff = dma_alloc_coherent(&pdev->dev, MAX_BUFF_SIZE, + info->data_buff = dma_alloc_coherent(&pdev->dev, info->buf_size, &info->data_buff_phys, GFP_KERNEL); if (info->data_buff == NULL) { dev_err(&pdev->dev, "failed to allocate dma buffer\n"); @@ -945,20 +1282,25 @@ static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info) pxa3xx_nand_data_dma_irq, info); if (info->data_dma_ch < 0) { dev_err(&pdev->dev, "failed to request data dma\n"); - dma_free_coherent(&pdev->dev, MAX_BUFF_SIZE, + dma_free_coherent(&pdev->dev, info->buf_size, info->data_buff, info->data_buff_phys); return info->data_dma_ch; } + /* + * Now that DMA buffers are allocated we turn on + * DMA proper for I/O operations. + */ + info->use_dma = 1; return 0; } static void pxa3xx_nand_free_buff(struct pxa3xx_nand_info *info) { struct platform_device *pdev = info->pdev; - if (use_dma) { + if (info->use_dma) { pxa_free_dma(info->data_dma_ch); - dma_free_coherent(&pdev->dev, MAX_BUFF_SIZE, + dma_free_coherent(&pdev->dev, info->buf_size, info->data_buff, info->data_buff_phys); } else { kfree(info->data_buff); @@ -967,7 +1309,7 @@ static void pxa3xx_nand_free_buff(struct pxa3xx_nand_info *info) #else static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info) { - info->data_buff = kmalloc(MAX_BUFF_SIZE, GFP_KERNEL); + info->data_buff = kmalloc(info->buf_size, GFP_KERNEL); if (info->data_buff == NULL) return -ENOMEM; return 0; @@ -982,18 +1324,92 @@ static void pxa3xx_nand_free_buff(struct pxa3xx_nand_info *info) static int pxa3xx_nand_sensing(struct pxa3xx_nand_info *info) { struct mtd_info *mtd; + struct nand_chip *chip; int ret; + mtd = info->host[info->cs]->mtd; + chip = mtd->priv; + /* use the common timing to make a try */ ret = pxa3xx_nand_config_flash(info, &builtin_flash_types[0]); if (ret) return ret; - pxa3xx_nand_cmdfunc(mtd, NAND_CMD_RESET, 0, 0); - if (info->is_ready) - return 0; + chip->cmdfunc(mtd, NAND_CMD_RESET, 0, 0); + ret = chip->waitfunc(mtd, chip); + if (ret & NAND_STATUS_FAIL) + return -ENODEV; - return -ENODEV; + return 0; +} + +static int pxa_ecc_init(struct pxa3xx_nand_info *info, + struct nand_ecc_ctrl *ecc, + int strength, int ecc_stepsize, int page_size) +{ + if (strength == 1 && ecc_stepsize == 512 && page_size == 2048) { + info->chunk_size = 2048; + info->spare_size = 40; + info->ecc_size = 24; + ecc->mode = NAND_ECC_HW; + ecc->size = 512; + ecc->strength = 1; + + } else if (strength == 1 && ecc_stepsize == 512 && page_size == 512) { + info->chunk_size = 512; + info->spare_size = 8; + info->ecc_size = 8; + ecc->mode = NAND_ECC_HW; + ecc->size = 512; + ecc->strength = 1; + + /* + * Required ECC: 4-bit correction per 512 bytes + * Select: 16-bit correction per 2048 bytes + */ + } else if (strength == 4 && ecc_stepsize == 512 && page_size == 2048) { + info->ecc_bch = 1; + info->chunk_size = 2048; + info->spare_size = 32; + info->ecc_size = 32; + ecc->mode = NAND_ECC_HW; + ecc->size = info->chunk_size; + ecc->layout = &ecc_layout_2KB_bch4bit; + ecc->strength = 16; + + } else if (strength == 4 && ecc_stepsize == 512 && page_size == 4096) { + info->ecc_bch = 1; + info->chunk_size = 2048; + info->spare_size = 32; + info->ecc_size = 32; + ecc->mode = NAND_ECC_HW; + ecc->size = info->chunk_size; + ecc->layout = &ecc_layout_4KB_bch4bit; + ecc->strength = 16; + + /* + * Required ECC: 8-bit correction per 512 bytes + * Select: 16-bit correction per 1024 bytes + */ + } else if (strength == 8 && ecc_stepsize == 512 && page_size == 4096) { + info->ecc_bch = 1; + info->chunk_size = 1024; + info->spare_size = 0; + info->ecc_size = 32; + ecc->mode = NAND_ECC_HW; + ecc->size = info->chunk_size; + ecc->layout = &ecc_layout_4KB_bch8bit; + ecc->strength = 16; + } else { + dev_err(&info->pdev->dev, + "ECC strength %d at page size %d is not supported\n", + strength, page_size); + return -ENODEV; + } + + dev_info(&info->pdev->dev, "ECC strength %d, ECC step size %d\n", + ecc->strength, ecc->size); + return 0; } static int pxa3xx_nand_scan(struct mtd_info *mtd) @@ -1008,6 +1424,7 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd) uint32_t id = -1; uint64_t chipsize; int i, ret, num; + uint16_t ecc_strength, ecc_step; if (pdata->keep_config && !pxa3xx_nand_detect_config(info)) goto KEEP_CONFIG; @@ -1066,22 +1483,77 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd) pxa3xx_flash_ids[1].name = NULL; def = pxa3xx_flash_ids; KEEP_CONFIG: - chip->ecc.mode = NAND_ECC_HW; - chip->ecc.size = host->page_size; - chip->ecc.strength = 1; - if (info->reg_ndcr & NDCR_DWIDTH_M) chip->options |= NAND_BUSWIDTH_16; + /* Device detection must be done with ECC disabled */ + if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370) + nand_writel(info, NDECCCTRL, 0x0); + if (nand_scan_ident(mtd, 1, def)) return -ENODEV; + + if (pdata->flash_bbt) { + /* + * We'll use a bad block table stored in-flash and don't + * allow writing the bad block marker to the flash. + */ + chip->bbt_options |= NAND_BBT_USE_FLASH | + NAND_BBT_NO_OOB_BBM; + chip->bbt_td = &bbt_main_descr; + chip->bbt_md = &bbt_mirror_descr; + } + + /* + * If the page size is bigger than the FIFO size, let's check + * we are given the right variant and then switch to the extended + * (aka splitted) command handling, + */ + if (mtd->writesize > PAGE_CHUNK_SIZE) { + if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370) { + chip->cmdfunc = nand_cmdfunc_extended; + } else { + dev_err(&info->pdev->dev, + "unsupported page size on this variant\n"); + return -ENODEV; + } + } + + if (pdata->ecc_strength && pdata->ecc_step_size) { + ecc_strength = pdata->ecc_strength; + ecc_step = pdata->ecc_step_size; + } else { + ecc_strength = chip->ecc_strength_ds; + ecc_step = chip->ecc_step_ds; + } + + /* Set default ECC strength requirements on non-ONFI devices */ + if (ecc_strength < 1 && ecc_step < 1) { + ecc_strength = 1; + ecc_step = 512; + } + + ret = pxa_ecc_init(info, &chip->ecc, ecc_strength, + ecc_step, mtd->writesize); + if (ret) + return ret; + /* calculate addressing information */ if (mtd->writesize >= 2048) host->col_addr_cycles = 2; else host->col_addr_cycles = 1; + /* release the initial buffer */ + kfree(info->data_buff); + + /* allocate the real data + oob buffer */ + info->buf_size = mtd->writesize + mtd->oobsize; + ret = pxa3xx_nand_init_buff(info); + if (ret) + return ret; info->oob_buff = info->data_buff + mtd->writesize; + if ((mtd->size >> chip->page_shift) > 65536) host->row_addr_cycles = 3; else @@ -1106,6 +1578,7 @@ static int alloc_nand_resource(struct platform_device *pdev) return -ENOMEM; info->pdev = pdev; + info->variant = pxa3xx_nand_get_variant(pdev); for (cs = 0; cs < pdata->num_cs; cs++) { mtd = (struct mtd_info *)((unsigned int)&info[1] + (sizeof(*mtd) + sizeof(*host)) * cs); @@ -1123,11 +1596,12 @@ static int alloc_nand_resource(struct platform_device *pdev) chip->controller = &info->controller; chip->waitfunc = pxa3xx_nand_waitfunc; chip->select_chip = pxa3xx_nand_select_chip; - chip->cmdfunc = pxa3xx_nand_cmdfunc; chip->read_word = pxa3xx_nand_read_word; chip->read_byte = pxa3xx_nand_read_byte; chip->read_buf = pxa3xx_nand_read_buf; chip->write_buf = pxa3xx_nand_write_buf; + chip->options |= NAND_NO_SUBPAGE_WRITE; + chip->cmdfunc = nand_cmdfunc; } spin_lock_init(&chip->controller->lock); @@ -1187,15 +1661,18 @@ static int alloc_nand_resource(struct platform_device *pdev) } info->mmio_phys = r->start; - ret = pxa3xx_nand_init_buff(info); - if (ret) + /* Allocate a buffer to allow flash detection */ + info->buf_size = INIT_BUFFER_SIZE; + info->data_buff = kmalloc(info->buf_size, GFP_KERNEL); + if (info->data_buff == NULL) { + ret = -ENOMEM; goto fail_disable_clk; + } /* initialize all interrupts to be disabled */ disable_int(info, NDSR_MASK); - ret = request_irq(irq, pxa3xx_nand_irq, IRQF_DISABLED, - pdev->name, info); + ret = request_irq(irq, pxa3xx_nand_irq, 0, pdev->name, info); if (ret < 0) { dev_err(&pdev->dev, "failed to request IRQ\n"); goto fail_free_buf; @@ -1207,7 +1684,7 @@ static int alloc_nand_resource(struct platform_device *pdev) fail_free_buf: free_irq(irq, info); - pxa3xx_nand_free_buff(info); + kfree(info->data_buff); fail_disable_clk: clk_disable_unprepare(info->clk); return ret; @@ -1236,29 +1713,6 @@ static int pxa3xx_nand_remove(struct platform_device *pdev) return 0; } -static struct of_device_id pxa3xx_nand_dt_ids[] = { - { - .compatible = "marvell,pxa3xx-nand", - .data = (void *)PXA3XX_NAND_VARIANT_PXA, - }, - { - .compatible = "marvell,armada370-nand", - .data = (void *)PXA3XX_NAND_VARIANT_ARMADA370, - }, - {} -}; -MODULE_DEVICE_TABLE(of, pxa3xx_nand_dt_ids); - -static enum pxa3xx_nand_variant -pxa3xx_nand_get_variant(struct platform_device *pdev) -{ - const struct of_device_id *of_id = - of_match_device(pxa3xx_nand_dt_ids, &pdev->dev); - if (!of_id) - return PXA3XX_NAND_VARIANT_PXA; - return (enum pxa3xx_nand_variant)of_id->data; -} - static int pxa3xx_nand_probe_dt(struct platform_device *pdev) { struct pxa3xx_nand_platform_data *pdata; @@ -1278,6 +1732,15 @@ static int pxa3xx_nand_probe_dt(struct platform_device *pdev) if (of_get_property(np, "marvell,nand-keep-config", NULL)) pdata->keep_config = 1; of_property_read_u32(np, "num-cs", &pdata->num_cs); + pdata->flash_bbt = of_get_nand_on_flash_bbt(np); + + pdata->ecc_strength = of_get_nand_ecc_strength(np); + if (pdata->ecc_strength < 0) + pdata->ecc_strength = 0; + + pdata->ecc_step_size = of_get_nand_ecc_step_size(np); + if (pdata->ecc_step_size < 0) + pdata->ecc_step_size = 0; pdev->dev.platform_data = pdata; @@ -1315,12 +1778,16 @@ static int pxa3xx_nand_probe(struct platform_device *pdev) } info = platform_get_drvdata(pdev); - info->variant = pxa3xx_nand_get_variant(pdev); probe_success = 0; for (cs = 0; cs < pdata->num_cs; cs++) { struct mtd_info *mtd = info->host[cs]->mtd; - mtd->name = pdev->name; + /* + * The mtd name matches the one used in 'mtdparts' kernel + * parameter. This name cannot be changed or otherwise + * user's mtd partitions configuration would get broken. + */ + mtd->name = "pxa3xx_nand-0"; info->cs = cs; ret = pxa3xx_nand_scan(mtd); if (ret) { @@ -1407,7 +1874,7 @@ static int pxa3xx_nand_resume(struct platform_device *pdev) static struct platform_driver pxa3xx_nand_driver = { .driver = { .name = "pxa3xx-nand", - .of_match_table = of_match_ptr(pxa3xx_nand_dt_ids), + .of_match_table = pxa3xx_nand_dt_ids, }, .probe = pxa3xx_nand_probe, .remove = pxa3xx_nand_remove, diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c index 9dcf02d22aa..baea83f4dea 100644 --- a/drivers/mtd/nand/r852.c +++ b/drivers/mtd/nand/r852.c @@ -181,7 +181,7 @@ static void r852_do_dma(struct r852_device *dev, uint8_t *buf, int do_read) /* Set dma direction */ dev->dma_dir = do_read; dev->dma_stage = 1; - INIT_COMPLETION(dev->dma_done); + reinit_completion(&dev->dma_done); dbg_verbose("doing dma %s ", do_read ? "read" : "write"); @@ -245,7 +245,7 @@ static void r852_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) } /* write DWORD chinks - faster */ - while (len) { + while (len >= 4) { reg = buf[0] | buf[1] << 8 | buf[2] << 16 | buf[3] << 24; r852_write_reg_dword(dev, R852_DATALINE, reg); buf += 4; @@ -254,8 +254,10 @@ static void r852_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) } /* write rest */ - while (len) + while (len > 0) { r852_write_reg(dev, R852_DATALINE, *buf++); + len--; + } } /* diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index d65cbe903d4..79acbb8691b 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -29,7 +29,6 @@ #include <linux/module.h> #include <linux/types.h> -#include <linux/init.h> #include <linux/kernel.h> #include <linux/string.h> #include <linux/io.h> @@ -46,9 +45,43 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> -#include <plat/regs-nand.h> #include <linux/platform_data/mtd-nand-s3c2410.h> +#define S3C2410_NFREG(x) (x) + +#define S3C2410_NFCONF S3C2410_NFREG(0x00) +#define S3C2410_NFCMD S3C2410_NFREG(0x04) +#define S3C2410_NFADDR S3C2410_NFREG(0x08) +#define S3C2410_NFDATA S3C2410_NFREG(0x0C) +#define S3C2410_NFSTAT S3C2410_NFREG(0x10) +#define S3C2410_NFECC S3C2410_NFREG(0x14) +#define S3C2440_NFCONT S3C2410_NFREG(0x04) +#define S3C2440_NFCMD S3C2410_NFREG(0x08) +#define S3C2440_NFADDR S3C2410_NFREG(0x0C) +#define S3C2440_NFDATA S3C2410_NFREG(0x10) +#define S3C2440_NFSTAT S3C2410_NFREG(0x20) +#define S3C2440_NFMECC0 S3C2410_NFREG(0x2C) +#define S3C2412_NFSTAT S3C2410_NFREG(0x28) +#define S3C2412_NFMECC0 S3C2410_NFREG(0x34) +#define S3C2410_NFCONF_EN (1<<15) +#define S3C2410_NFCONF_INITECC (1<<12) +#define S3C2410_NFCONF_nFCE (1<<11) +#define S3C2410_NFCONF_TACLS(x) ((x)<<8) +#define S3C2410_NFCONF_TWRPH0(x) ((x)<<4) +#define S3C2410_NFCONF_TWRPH1(x) ((x)<<0) +#define S3C2410_NFSTAT_BUSY (1<<0) +#define S3C2440_NFCONF_TACLS(x) ((x)<<12) +#define S3C2440_NFCONF_TWRPH0(x) ((x)<<8) +#define S3C2440_NFCONF_TWRPH1(x) ((x)<<4) +#define S3C2440_NFCONT_INITECC (1<<4) +#define S3C2440_NFCONT_nFCE (1<<1) +#define S3C2440_NFCONT_ENABLE (1<<0) +#define S3C2440_NFSTAT_READY (1<<0) +#define S3C2412_NFCONF_NANDBOOT (1<<31) +#define S3C2412_NFCONT_INIT_MAIN_ECC (1<<5) +#define S3C2412_NFCONT_nFCE0 (1<<1) +#define S3C2412_NFSTAT_READY (1<<0) + /* new oob placement block for use with hardware ecc generation */ @@ -919,7 +952,6 @@ static int s3c24xx_nand_probe(struct platform_device *pdev) info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); if (info == NULL) { - dev_err(&pdev->dev, "no memory for flash info\n"); err = -ENOMEM; goto exit_error; } @@ -974,7 +1006,6 @@ static int s3c24xx_nand_probe(struct platform_device *pdev) size = nr_sets * sizeof(*info->mtds); info->mtds = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); if (info->mtds == NULL) { - dev_err(&pdev->dev, "failed to allocate mtd storage\n"); err = -ENOMEM; goto exit_error; } diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c index a3c84ebbe39..c0670237e7a 100644 --- a/drivers/mtd/nand/sh_flctl.c +++ b/drivers/mtd/nand/sh_flctl.c @@ -151,7 +151,7 @@ static void flctl_setup_dma(struct sh_flctl *flctl) dma_cap_set(DMA_SLAVE, mask); flctl->chan_fifo0_tx = dma_request_channel(mask, shdma_chan_filter, - (void *)pdata->slave_id_fifo0_tx); + (void *)(uintptr_t)pdata->slave_id_fifo0_tx); dev_dbg(&pdev->dev, "%s: TX: got channel %p\n", __func__, flctl->chan_fifo0_tx); @@ -168,7 +168,7 @@ static void flctl_setup_dma(struct sh_flctl *flctl) goto err; flctl->chan_fifo0_rx = dma_request_channel(mask, shdma_chan_filter, - (void *)pdata->slave_id_fifo0_rx); + (void *)(uintptr_t)pdata->slave_id_fifo0_rx); dev_dbg(&pdev->dev, "%s: RX: got channel %p\n", __func__, flctl->chan_fifo0_rx); @@ -897,7 +897,7 @@ static void flctl_select_chip(struct mtd_info *mtd, int chipnr) if (!flctl->qos_request) { ret = dev_pm_qos_add_request(&flctl->pdev->dev, &flctl->pm_qos, - DEV_PM_QOS_LATENCY, + DEV_PM_QOS_RESUME_LATENCY, 100); if (ret < 0) dev_err(&flctl->pdev->dev, @@ -1021,7 +1021,6 @@ static irqreturn_t flctl_handle_flste(int irq, void *dev_id) return IRQ_HANDLED; } -#ifdef CONFIG_OF struct flctl_soc_config { unsigned long flcmncr_val; unsigned has_hwecc:1; @@ -1059,10 +1058,8 @@ static struct sh_flctl_platform_data *flctl_parse_dt(struct device *dev) pdata = devm_kzalloc(dev, sizeof(struct sh_flctl_platform_data), GFP_KERNEL); - if (!pdata) { - dev_err(dev, "%s: failed to allocate config data\n", __func__); + if (!pdata) return NULL; - } /* set SoC specific options */ pdata->flcmncr_val = config->flcmncr_val; @@ -1080,12 +1077,6 @@ static struct sh_flctl_platform_data *flctl_parse_dt(struct device *dev) return pdata; } -#else /* CONFIG_OF */ -static struct sh_flctl_platform_data *flctl_parse_dt(struct device *dev) -{ - return NULL; -} -#endif /* CONFIG_OF */ static int flctl_probe(struct platform_device *pdev) { @@ -1094,38 +1085,30 @@ static int flctl_probe(struct platform_device *pdev) struct mtd_info *flctl_mtd; struct nand_chip *nand; struct sh_flctl_platform_data *pdata; - int ret = -ENXIO; + int ret; int irq; struct mtd_part_parser_data ppdata = {}; - flctl = kzalloc(sizeof(struct sh_flctl), GFP_KERNEL); - if (!flctl) { - dev_err(&pdev->dev, "failed to allocate driver data\n"); + flctl = devm_kzalloc(&pdev->dev, sizeof(struct sh_flctl), GFP_KERNEL); + if (!flctl) return -ENOMEM; - } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "failed to get I/O memory\n"); - goto err_iomap; - } - - flctl->reg = ioremap(res->start, resource_size(res)); - if (flctl->reg == NULL) { - dev_err(&pdev->dev, "failed to remap I/O memory\n"); - goto err_iomap; - } + flctl->reg = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(flctl->reg)) + return PTR_ERR(flctl->reg); irq = platform_get_irq(pdev, 0); if (irq < 0) { dev_err(&pdev->dev, "failed to get flste irq data\n"); - goto err_flste; + return -ENXIO; } - ret = request_irq(irq, flctl_handle_flste, IRQF_SHARED, "flste", flctl); + ret = devm_request_irq(&pdev->dev, irq, flctl_handle_flste, IRQF_SHARED, + "flste", flctl); if (ret) { dev_err(&pdev->dev, "request interrupt failed.\n"); - goto err_flste; + return ret; } if (pdev->dev.of_node) @@ -1135,8 +1118,7 @@ static int flctl_probe(struct platform_device *pdev) if (!pdata) { dev_err(&pdev->dev, "no setup data defined\n"); - ret = -EINVAL; - goto err_pdata; + return -EINVAL; } platform_set_drvdata(pdev, flctl); @@ -1190,12 +1172,6 @@ static int flctl_probe(struct platform_device *pdev) err_chip: flctl_release_dma(flctl); pm_runtime_disable(&pdev->dev); -err_pdata: - free_irq(irq, flctl); -err_flste: - iounmap(flctl->reg); -err_iomap: - kfree(flctl); return ret; } @@ -1206,9 +1182,6 @@ static int flctl_remove(struct platform_device *pdev) flctl_release_dma(flctl); nand_release(&flctl->mtd); pm_runtime_disable(&pdev->dev); - free_irq(platform_get_irq(pdev, 0), flctl); - iounmap(flctl->reg); - kfree(flctl); return 0; } diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c index 87908d760fe..e81059b5838 100644 --- a/drivers/mtd/nand/sharpsl.c +++ b/drivers/mtd/nand/sharpsl.c @@ -121,10 +121,8 @@ static int sharpsl_nand_probe(struct platform_device *pdev) /* Allocate memory for MTD device structure and private data */ sharpsl = kzalloc(sizeof(struct sharpsl_nand), GFP_KERNEL); - if (!sharpsl) { - printk("Unable to allocate SharpSL NAND MTD device structure.\n"); + if (!sharpsl) return -ENOMEM; - } r = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!r) { @@ -136,7 +134,7 @@ static int sharpsl_nand_probe(struct platform_device *pdev) /* map physical address */ sharpsl->io = ioremap(r->start, resource_size(r)); if (!sharpsl->io) { - printk("ioremap to access Sharp SL NAND chip failed\n"); + dev_err(&pdev->dev, "ioremap to access Sharp SL NAND chip failed\n"); err = -EIO; goto err_ioremap; } diff --git a/drivers/mtd/nand/socrates_nand.c b/drivers/mtd/nand/socrates_nand.c index 09dde7d2717..fe8058a4505 100644 --- a/drivers/mtd/nand/socrates_nand.c +++ b/drivers/mtd/nand/socrates_nand.c @@ -15,6 +15,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/io.h> @@ -149,17 +150,13 @@ static int socrates_nand_probe(struct platform_device *ofdev) struct mtd_part_parser_data ppdata; /* Allocate memory for the device structure (and zero it) */ - host = kzalloc(sizeof(struct socrates_nand_host), GFP_KERNEL); - if (!host) { - printk(KERN_ERR - "socrates_nand: failed to allocate device structure.\n"); + host = devm_kzalloc(&ofdev->dev, sizeof(*host), GFP_KERNEL); + if (!host) return -ENOMEM; - } host->io_base = of_iomap(ofdev->dev.of_node, 0); if (host->io_base == NULL) { - printk(KERN_ERR "socrates_nand: ioremap failed\n"); - kfree(host); + dev_err(&ofdev->dev, "ioremap failed\n"); return -EIO; } @@ -211,9 +208,7 @@ static int socrates_nand_probe(struct platform_device *ofdev) nand_release(mtd); out: - dev_set_drvdata(&ofdev->dev, NULL); iounmap(host->io_base); - kfree(host); return res; } @@ -227,9 +222,7 @@ static int socrates_nand_remove(struct platform_device *ofdev) nand_release(mtd); - dev_set_drvdata(&ofdev->dev, NULL); iounmap(host->io_base); - kfree(host); return 0; } diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c index 396530d87ec..fb8fd35fa66 100644 --- a/drivers/mtd/nand/tmio_nand.c +++ b/drivers/mtd/nand/tmio_nand.c @@ -371,11 +371,9 @@ static int tmio_probe(struct platform_device *dev) if (data == NULL) dev_warn(&dev->dev, "NULL platform data!\n"); - tmio = kzalloc(sizeof *tmio, GFP_KERNEL); - if (!tmio) { - retval = -ENOMEM; - goto err_kzalloc; - } + tmio = devm_kzalloc(&dev->dev, sizeof(*tmio), GFP_KERNEL); + if (!tmio) + return -ENOMEM; tmio->dev = dev; @@ -385,22 +383,18 @@ static int tmio_probe(struct platform_device *dev) mtd->priv = nand_chip; mtd->name = "tmio-nand"; - tmio->ccr = ioremap(ccr->start, resource_size(ccr)); - if (!tmio->ccr) { - retval = -EIO; - goto err_iomap_ccr; - } + tmio->ccr = devm_ioremap(&dev->dev, ccr->start, resource_size(ccr)); + if (!tmio->ccr) + return -EIO; tmio->fcr_base = fcr->start & 0xfffff; - tmio->fcr = ioremap(fcr->start, resource_size(fcr)); - if (!tmio->fcr) { - retval = -EIO; - goto err_iomap_fcr; - } + tmio->fcr = devm_ioremap(&dev->dev, fcr->start, resource_size(fcr)); + if (!tmio->fcr) + return -EIO; retval = tmio_hw_init(dev, tmio); if (retval) - goto err_hwinit; + return retval; /* Set address of NAND IO lines */ nand_chip->IO_ADDR_R = tmio->fcr; @@ -428,8 +422,8 @@ static int tmio_probe(struct platform_device *dev) /* 15 us command delay time */ nand_chip->chip_delay = 15; - retval = request_irq(irq, &tmio_irq, - IRQF_DISABLED, dev_name(&dev->dev), tmio); + retval = devm_request_irq(&dev->dev, irq, &tmio_irq, 0, + dev_name(&dev->dev), tmio); if (retval) { dev_err(&dev->dev, "request_irq error %d\n", retval); goto err_irq; @@ -441,7 +435,7 @@ static int tmio_probe(struct platform_device *dev) /* Scan to find existence of the device */ if (nand_scan(mtd, 1)) { retval = -ENODEV; - goto err_scan; + goto err_irq; } /* Register the partitions */ retval = mtd_device_parse_register(mtd, NULL, NULL, @@ -452,18 +446,8 @@ static int tmio_probe(struct platform_device *dev) nand_release(mtd); -err_scan: - if (tmio->irq) - free_irq(tmio->irq, tmio); err_irq: tmio_hw_stop(dev, tmio); -err_hwinit: - iounmap(tmio->fcr); -err_iomap_fcr: - iounmap(tmio->ccr); -err_iomap_ccr: - kfree(tmio); -err_kzalloc: return retval; } @@ -472,12 +456,7 @@ static int tmio_remove(struct platform_device *dev) struct tmio_nand *tmio = platform_get_drvdata(dev); nand_release(&tmio->mtd); - if (tmio->irq) - free_irq(tmio->irq, tmio); tmio_hw_stop(dev, tmio); - iounmap(tmio->fcr); - iounmap(tmio->ccr); - kfree(tmio); return 0; } diff --git a/drivers/mtd/nand/txx9ndfmc.c b/drivers/mtd/nand/txx9ndfmc.c index 235714a421d..c1622a5ba81 100644 --- a/drivers/mtd/nand/txx9ndfmc.c +++ b/drivers/mtd/nand/txx9ndfmc.c @@ -319,11 +319,8 @@ static int __init txx9ndfmc_probe(struct platform_device *dev) continue; txx9_priv = kzalloc(sizeof(struct txx9ndfmc_priv), GFP_KERNEL); - if (!txx9_priv) { - dev_err(&dev->dev, "Unable to allocate " - "TXx9 NDFMC MTD device structure.\n"); + if (!txx9_priv) continue; - } chip = &txx9_priv->chip; mtd = &txx9_priv->mtd; mtd->owner = THIS_MODULE; diff --git a/drivers/mtd/nftlcore.c b/drivers/mtd/nftlcore.c index c5f4ebf4b38..46f27de018c 100644 --- a/drivers/mtd/nftlcore.c +++ b/drivers/mtd/nftlcore.c @@ -50,7 +50,7 @@ static void nftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd) struct NFTLrecord *nftl; unsigned long temp; - if (mtd->type != MTD_NANDFLASH || mtd->size > UINT_MAX) + if (!mtd_type_is_nand(mtd) || mtd->size > UINT_MAX) return; /* OK, this is moderately ugly. But probably safe. Alternatives? */ if (memcmp(mtd->name, "DiskOnChip", 10)) diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/ofpart.c index d64f8c30945..aa26c32e1bc 100644 --- a/drivers/mtd/ofpart.c +++ b/drivers/mtd/ofpart.c @@ -81,7 +81,7 @@ static int parse_ofpart_partitions(struct mtd_info *master, partname = of_get_property(pp, "label", &len); if (!partname) partname = of_get_property(pp, "name", &len); - (*pparts)[i].name = (char *)partname; + (*pparts)[i].name = partname; if (of_get_property(pp, "read-only", &len)) (*pparts)[i].mask_flags |= MTD_WRITEABLE; @@ -152,7 +152,7 @@ static int parse_ofoldpart_partitions(struct mtd_info *master, if (names && (plen > 0)) { int len = strlen(names) + 1; - (*pparts)[i].name = (char *)names; + (*pparts)[i].name = names; plen -= len; names += len; } else { @@ -173,18 +173,9 @@ static struct mtd_part_parser ofoldpart_parser = { static int __init ofpart_parser_init(void) { - int rc; - rc = register_mtd_parser(&ofpart_parser); - if (rc) - goto out; - - rc = register_mtd_parser(&ofoldpart_parser); - if (!rc) - return 0; - - deregister_mtd_parser(&ofoldpart_parser); -out: - return rc; + register_mtd_parser(&ofpart_parser); + register_mtd_parser(&ofoldpart_parser); + return 0; } static void __exit ofpart_parser_exit(void) diff --git a/drivers/mtd/onenand/generic.c b/drivers/mtd/onenand/generic.c index 63699fffc96..093c29ac1a1 100644 --- a/drivers/mtd/onenand/generic.c +++ b/drivers/mtd/onenand/generic.c @@ -13,7 +13,6 @@ */ #include <linux/module.h> -#include <linux/init.h> #include <linux/slab.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> @@ -58,7 +57,7 @@ static int generic_onenand_probe(struct platform_device *pdev) goto out_release_mem_region; } - info->onenand.mmcontrol = pdata ? pdata->mmcontrol : 0; + info->onenand.mmcontrol = pdata ? pdata->mmcontrol : NULL; info->onenand.irq = platform_get_irq(pdev, 0); info->mtd.name = dev_name(&pdev->dev); diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index 558071bf92d..d945473c388 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -25,7 +25,6 @@ #include <linux/device.h> #include <linux/module.h> -#include <linux/init.h> #include <linux/mtd/mtd.h> #include <linux/mtd/onenand.h> #include <linux/mtd/partitions.h> @@ -159,7 +158,7 @@ static int omap2_onenand_wait(struct mtd_info *mtd, int state) syscfg = read_reg(c, ONENAND_REG_SYS_CFG1); } - INIT_COMPLETION(c->irq_done); + reinit_completion(&c->irq_done); if (c->gpio_irq) { result = gpio_get_value(c->gpio_irq); if (result == -1) { @@ -349,7 +348,7 @@ static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area, omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC, dma_dst, 0, 0); - INIT_COMPLETION(c->dma_done); + reinit_completion(&c->dma_done); omap_start_dma(c->dma_channel); timeout = jiffies + msecs_to_jiffies(20); @@ -420,7 +419,7 @@ static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area, omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC, dma_dst, 0, 0); - INIT_COMPLETION(c->dma_done); + reinit_completion(&c->dma_done); omap_start_dma(c->dma_channel); timeout = jiffies + msecs_to_jiffies(20); @@ -499,7 +498,7 @@ static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area, omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC, dma_dst, 0, 0); - INIT_COMPLETION(c->dma_done); + reinit_completion(&c->dma_done); omap_start_dma(c->dma_channel); wait_for_completion(&c->dma_done); @@ -544,7 +543,7 @@ static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area, omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC, dma_dst, 0, 0); - INIT_COMPLETION(c->dma_done); + reinit_completion(&c->dma_done); omap_start_dma(c->dma_channel); wait_for_completion(&c->dma_done); @@ -573,28 +572,6 @@ static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area, static struct platform_driver omap2_onenand_driver; -static int __adjust_timing(struct device *dev, void *data) -{ - int ret = 0; - struct omap2_onenand *c; - - c = dev_get_drvdata(dev); - - BUG_ON(c->setup == NULL); - - /* DMA is not in use so this is all that is needed */ - /* Revisit for OMAP3! */ - ret = c->setup(c->onenand.base, &c->freq); - - return ret; -} - -int omap2_onenand_rephase(void) -{ - return driver_for_each_device(&omap2_onenand_driver.driver, NULL, - NULL, __adjust_timing); -} - static void omap2_onenand_shutdown(struct platform_device *pdev) { struct omap2_onenand *c = dev_get_drvdata(&pdev->dev); diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index b3f41f20062..635ee002769 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -24,7 +24,6 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/slab.h> -#include <linux/init.h> #include <linux/sched.h> #include <linux/delay.h> #include <linux/interrupt.h> @@ -2556,10 +2555,6 @@ static int onenand_block_isbad(struct mtd_info *mtd, loff_t ofs) { int ret; - /* Check for invalid offset */ - if (ofs > mtd->size) - return -EINVAL; - onenand_get_device(mtd, FL_READING); ret = onenand_block_isbad_nolock(mtd, ofs, 0); onenand_release_device(mtd); @@ -3242,20 +3237,17 @@ static int onenand_otp_walk(struct mtd_info *mtd, loff_t from, size_t len, /** * onenand_get_fact_prot_info - [MTD Interface] Read factory OTP info * @param mtd MTD device structure - * @param buf the databuffer to put/get data * @param len number of bytes to read + * @param retlen pointer to variable to store the number of read bytes + * @param buf the databuffer to put/get data * * Read factory OTP info. */ -static int onenand_get_fact_prot_info(struct mtd_info *mtd, - struct otp_info *buf, size_t len) +static int onenand_get_fact_prot_info(struct mtd_info *mtd, size_t len, + size_t *retlen, struct otp_info *buf) { - size_t retlen; - int ret; - - ret = onenand_otp_walk(mtd, 0, len, &retlen, (u_char *) buf, NULL, MTD_OTP_FACTORY); - - return ret ? : retlen; + return onenand_otp_walk(mtd, 0, len, retlen, (u_char *) buf, NULL, + MTD_OTP_FACTORY); } /** @@ -3277,20 +3269,17 @@ static int onenand_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, /** * onenand_get_user_prot_info - [MTD Interface] Read user OTP info * @param mtd MTD device structure - * @param buf the databuffer to put/get data + * @param retlen pointer to variable to store the number of read bytes * @param len number of bytes to read + * @param buf the databuffer to put/get data * * Read user OTP info. */ -static int onenand_get_user_prot_info(struct mtd_info *mtd, - struct otp_info *buf, size_t len) +static int onenand_get_user_prot_info(struct mtd_info *mtd, size_t len, + size_t *retlen, struct otp_info *buf) { - size_t retlen; - int ret; - - ret = onenand_otp_walk(mtd, 0, len, &retlen, (u_char *) buf, NULL, MTD_OTP_USER); - - return ret ? : retlen; + return onenand_otp_walk(mtd, 0, len, retlen, (u_char *) buf, NULL, + MTD_OTP_USER); } /** @@ -3529,7 +3518,7 @@ static int flexonenand_get_boundary(struct mtd_info *mtd) { struct onenand_chip *this = mtd->priv; unsigned die, bdry; - int ret, syscfg, locked; + int syscfg, locked; /* Disable ECC */ syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1); @@ -3540,7 +3529,7 @@ static int flexonenand_get_boundary(struct mtd_info *mtd) this->wait(mtd, FL_SYNCING); this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0); - ret = this->wait(mtd, FL_READING); + this->wait(mtd, FL_READING); bdry = this->read_word(this->base + ONENAND_DATARAM); if ((bdry >> FLEXONENAND_PI_UNLOCK_SHIFT) == 3) @@ -3550,7 +3539,7 @@ static int flexonenand_get_boundary(struct mtd_info *mtd) this->boundary[die] = bdry & FLEXONENAND_PI_MASK; this->command(mtd, ONENAND_CMD_RESET, 0, 0); - ret = this->wait(mtd, FL_RESETING); + this->wait(mtd, FL_RESETING); printk(KERN_INFO "Die %d boundary: %d%s\n", die, this->boundary[die], locked ? "(Locked)" : "(Unlocked)"); @@ -3734,7 +3723,7 @@ static int flexonenand_set_boundary(struct mtd_info *mtd, int die, /* Check is boundary is locked */ this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0); - ret = this->wait(mtd, FL_READING); + this->wait(mtd, FL_READING); thisboundary = this->read_word(this->base + ONENAND_DATARAM); if ((thisboundary >> FLEXONENAND_PI_UNLOCK_SHIFT) != 3) { @@ -3835,7 +3824,7 @@ static int onenand_chip_probe(struct mtd_info *mtd) static int onenand_probe(struct mtd_info *mtd) { struct onenand_chip *this = mtd->priv; - int maf_id, dev_id, ver_id; + int dev_id, ver_id; int density; int ret; @@ -3843,8 +3832,7 @@ static int onenand_probe(struct mtd_info *mtd) if (ret) return ret; - /* Read manufacturer and device IDs from Register */ - maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID); + /* Device and version IDs from Register */ dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID); ver_id = this->read_word(this->base + ONENAND_REG_VERSION_ID); this->technology = this->read_word(this->base + ONENAND_REG_TECHNOLOGY); @@ -4000,11 +3988,8 @@ int onenand_scan(struct mtd_info *mtd, int maxchips) /* Allocate buffers, if necessary */ if (!this->page_buf) { this->page_buf = kzalloc(mtd->writesize, GFP_KERNEL); - if (!this->page_buf) { - printk(KERN_ERR "%s: Can't allocate page_buf\n", - __func__); + if (!this->page_buf) return -ENOMEM; - } #ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE this->verify_buf = kzalloc(mtd->writesize, GFP_KERNEL); if (!this->verify_buf) { @@ -4017,8 +4002,6 @@ int onenand_scan(struct mtd_info *mtd, int maxchips) if (!this->oob_buf) { this->oob_buf = kzalloc(mtd->oobsize, GFP_KERNEL); if (!this->oob_buf) { - printk(KERN_ERR "%s: Can't allocate oob_buf\n", - __func__); if (this->options & ONENAND_PAGEBUF_ALLOC) { this->options &= ~ONENAND_PAGEBUF_ALLOC; kfree(this->page_buf); diff --git a/drivers/mtd/onenand/samsung.c b/drivers/mtd/onenand/samsung.c index df7400dd4df..efb819c3df2 100644 --- a/drivers/mtd/onenand/samsung.c +++ b/drivers/mtd/onenand/samsung.c @@ -537,9 +537,9 @@ static int onenand_write_bufferram(struct mtd_info *mtd, int area, return 0; } -static int (*s5pc110_dma_ops)(void *dst, void *src, size_t count, int direction); +static int (*s5pc110_dma_ops)(dma_addr_t dst, dma_addr_t src, size_t count, int direction); -static int s5pc110_dma_poll(void *dst, void *src, size_t count, int direction) +static int s5pc110_dma_poll(dma_addr_t dst, dma_addr_t src, size_t count, int direction) { void __iomem *base = onenand->dma_addr; int status; @@ -605,7 +605,7 @@ static irqreturn_t s5pc110_onenand_irq(int irq, void *data) return IRQ_HANDLED; } -static int s5pc110_dma_irq(void *dst, void *src, size_t count, int direction) +static int s5pc110_dma_irq(dma_addr_t dst, dma_addr_t src, size_t count, int direction) { void __iomem *base = onenand->dma_addr; int status; @@ -686,7 +686,7 @@ static int s5pc110_read_bufferram(struct mtd_info *mtd, int area, dev_err(dev, "Couldn't map a %d byte buffer for DMA\n", count); goto normal; } - err = s5pc110_dma_ops((void *) dma_dst, (void *) dma_src, + err = s5pc110_dma_ops(dma_dst, dma_src, count, S5PC110_DMA_DIR_READ); if (page_dma) @@ -872,10 +872,8 @@ static int s3c_onenand_probe(struct platform_device *pdev) size = sizeof(struct mtd_info) + sizeof(struct onenand_chip); mtd = kzalloc(size, GFP_KERNEL); - if (!mtd) { - dev_err(&pdev->dev, "failed to allocate memory\n"); + if (!mtd) return -ENOMEM; - } onenand = kzalloc(sizeof(struct s3c_onenand), GFP_KERNEL); if (!onenand) { diff --git a/drivers/mtd/onenand/samsung.h b/drivers/mtd/onenand/samsung.h index c4a80e67e43..9016dc0136a 100644 --- a/drivers/mtd/onenand/samsung.h +++ b/drivers/mtd/onenand/samsung.h @@ -1,6 +1,4 @@ /* - * linux/arch/arm/plat-s3c/include/plat/regs-onenand.h - * * Copyright (C) 2008-2010 Samsung Electronics * Kyungmin Park <kyungmin.park@samsung.com> * diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c index 580035c803d..5da911ebdf4 100644 --- a/drivers/mtd/redboot.c +++ b/drivers/mtd/redboot.c @@ -300,7 +300,8 @@ MODULE_ALIAS("RedBoot"); static int __init redboot_parser_init(void) { - return register_mtd_parser(&redboot_parser); + register_mtd_parser(&redboot_parser); + return 0; } static void __exit redboot_parser_exit(void) diff --git a/drivers/mtd/rfd_ftl.c b/drivers/mtd/rfd_ftl.c index 233b946e5d6..d1cbf26db2c 100644 --- a/drivers/mtd/rfd_ftl.c +++ b/drivers/mtd/rfd_ftl.c @@ -602,8 +602,7 @@ static int mark_sector_deleted(struct partition *part, u_long old_addr) if (rc) { printk(KERN_ERR PREFIX "error writing '%s' at " "0x%lx\n", part->mbd.mtd->name, addr); - if (rc) - goto err; + goto err; } if (block == part->current_block) part->header_cache[offset + HEADER_MAP_OFFSET] = del; @@ -675,8 +674,7 @@ static int do_writesect(struct mtd_blktrans_dev *dev, u_long sector, char *buf, if (rc) { printk(KERN_ERR PREFIX "error writing '%s' at 0x%lx\n", part->mbd.mtd->name, addr); - if (rc) - goto err; + goto err; } part->sector_map[sector] = addr; @@ -695,8 +693,7 @@ static int do_writesect(struct mtd_blktrans_dev *dev, u_long sector, char *buf, if (rc) { printk(KERN_ERR PREFIX "error writing '%s' at 0x%lx\n", part->mbd.mtd->name, addr); - if (rc) - goto err; + goto err; } block->used_sectors++; block->free_sectors--; diff --git a/drivers/mtd/sm_ftl.c b/drivers/mtd/sm_ftl.c index 4b8e89583f2..cf49c22673b 100644 --- a/drivers/mtd/sm_ftl.c +++ b/drivers/mtd/sm_ftl.c @@ -59,15 +59,12 @@ static struct attribute_group *sm_create_sysfs_attributes(struct sm_ftl *ftl) struct attribute_group *attr_group; struct attribute **attributes; struct sm_sysfs_attribute *vendor_attribute; + char *vendor; - int vendor_len = strnlen(ftl->cis_buffer + SM_CIS_VENDOR_OFFSET, - SM_SMALL_PAGE - SM_CIS_VENDOR_OFFSET); - - char *vendor = kmalloc(vendor_len, GFP_KERNEL); + vendor = kstrndup(ftl->cis_buffer + SM_CIS_VENDOR_OFFSET, + SM_SMALL_PAGE - SM_CIS_VENDOR_OFFSET, GFP_KERNEL); if (!vendor) goto error1; - memcpy(vendor, ftl->cis_buffer + SM_CIS_VENDOR_OFFSET, vendor_len); - vendor[vendor_len] = 0; /* Initialize sysfs attributes */ vendor_attribute = @@ -78,7 +75,7 @@ static struct attribute_group *sm_create_sysfs_attributes(struct sm_ftl *ftl) sysfs_attr_init(&vendor_attribute->dev_attr.attr); vendor_attribute->data = vendor; - vendor_attribute->len = vendor_len; + vendor_attribute->len = strlen(vendor); vendor_attribute->dev_attr.attr.name = "vendor"; vendor_attribute->dev_attr.attr.mode = S_IRUGO; vendor_attribute->dev_attr.show = sm_attr_show; diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig new file mode 100644 index 00000000000..f8acfa4310e --- /dev/null +++ b/drivers/mtd/spi-nor/Kconfig @@ -0,0 +1,17 @@ +menuconfig MTD_SPI_NOR + tristate "SPI-NOR device support" + depends on MTD + help + This is the framework for the SPI NOR which can be used by the SPI + device drivers and the SPI-NOR device driver. + +if MTD_SPI_NOR + +config SPI_FSL_QUADSPI + tristate "Freescale Quad SPI controller" + depends on ARCH_MXC + help + This enables support for the Quad SPI controller in master mode. + We only connect the NOR to this controller now. + +endif # MTD_SPI_NOR diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile new file mode 100644 index 00000000000..6a7ce146224 --- /dev/null +++ b/drivers/mtd/spi-nor/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o +obj-$(CONFIG_SPI_FSL_QUADSPI) += fsl-quadspi.o diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c new file mode 100644 index 00000000000..8d659a2888d --- /dev/null +++ b/drivers/mtd/spi-nor/fsl-quadspi.c @@ -0,0 +1,1009 @@ +/* + * Freescale QuadSPI driver. + * + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/errno.h> +#include <linux/platform_device.h> +#include <linux/sched.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/timer.h> +#include <linux/jiffies.h> +#include <linux/completion.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/spi-nor.h> + +/* The registers */ +#define QUADSPI_MCR 0x00 +#define QUADSPI_MCR_RESERVED_SHIFT 16 +#define QUADSPI_MCR_RESERVED_MASK (0xF << QUADSPI_MCR_RESERVED_SHIFT) +#define QUADSPI_MCR_MDIS_SHIFT 14 +#define QUADSPI_MCR_MDIS_MASK (1 << QUADSPI_MCR_MDIS_SHIFT) +#define QUADSPI_MCR_CLR_TXF_SHIFT 11 +#define QUADSPI_MCR_CLR_TXF_MASK (1 << QUADSPI_MCR_CLR_TXF_SHIFT) +#define QUADSPI_MCR_CLR_RXF_SHIFT 10 +#define QUADSPI_MCR_CLR_RXF_MASK (1 << QUADSPI_MCR_CLR_RXF_SHIFT) +#define QUADSPI_MCR_DDR_EN_SHIFT 7 +#define QUADSPI_MCR_DDR_EN_MASK (1 << QUADSPI_MCR_DDR_EN_SHIFT) +#define QUADSPI_MCR_END_CFG_SHIFT 2 +#define QUADSPI_MCR_END_CFG_MASK (3 << QUADSPI_MCR_END_CFG_SHIFT) +#define QUADSPI_MCR_SWRSTHD_SHIFT 1 +#define QUADSPI_MCR_SWRSTHD_MASK (1 << QUADSPI_MCR_SWRSTHD_SHIFT) +#define QUADSPI_MCR_SWRSTSD_SHIFT 0 +#define QUADSPI_MCR_SWRSTSD_MASK (1 << QUADSPI_MCR_SWRSTSD_SHIFT) + +#define QUADSPI_IPCR 0x08 +#define QUADSPI_IPCR_SEQID_SHIFT 24 +#define QUADSPI_IPCR_SEQID_MASK (0xF << QUADSPI_IPCR_SEQID_SHIFT) + +#define QUADSPI_BUF0CR 0x10 +#define QUADSPI_BUF1CR 0x14 +#define QUADSPI_BUF2CR 0x18 +#define QUADSPI_BUFXCR_INVALID_MSTRID 0xe + +#define QUADSPI_BUF3CR 0x1c +#define QUADSPI_BUF3CR_ALLMST_SHIFT 31 +#define QUADSPI_BUF3CR_ALLMST (1 << QUADSPI_BUF3CR_ALLMST_SHIFT) + +#define QUADSPI_BFGENCR 0x20 +#define QUADSPI_BFGENCR_PAR_EN_SHIFT 16 +#define QUADSPI_BFGENCR_PAR_EN_MASK (1 << (QUADSPI_BFGENCR_PAR_EN_SHIFT)) +#define QUADSPI_BFGENCR_SEQID_SHIFT 12 +#define QUADSPI_BFGENCR_SEQID_MASK (0xF << QUADSPI_BFGENCR_SEQID_SHIFT) + +#define QUADSPI_BUF0IND 0x30 +#define QUADSPI_BUF1IND 0x34 +#define QUADSPI_BUF2IND 0x38 +#define QUADSPI_SFAR 0x100 + +#define QUADSPI_SMPR 0x108 +#define QUADSPI_SMPR_DDRSMP_SHIFT 16 +#define QUADSPI_SMPR_DDRSMP_MASK (7 << QUADSPI_SMPR_DDRSMP_SHIFT) +#define QUADSPI_SMPR_FSDLY_SHIFT 6 +#define QUADSPI_SMPR_FSDLY_MASK (1 << QUADSPI_SMPR_FSDLY_SHIFT) +#define QUADSPI_SMPR_FSPHS_SHIFT 5 +#define QUADSPI_SMPR_FSPHS_MASK (1 << QUADSPI_SMPR_FSPHS_SHIFT) +#define QUADSPI_SMPR_HSENA_SHIFT 0 +#define QUADSPI_SMPR_HSENA_MASK (1 << QUADSPI_SMPR_HSENA_SHIFT) + +#define QUADSPI_RBSR 0x10c +#define QUADSPI_RBSR_RDBFL_SHIFT 8 +#define QUADSPI_RBSR_RDBFL_MASK (0x3F << QUADSPI_RBSR_RDBFL_SHIFT) + +#define QUADSPI_RBCT 0x110 +#define QUADSPI_RBCT_WMRK_MASK 0x1F +#define QUADSPI_RBCT_RXBRD_SHIFT 8 +#define QUADSPI_RBCT_RXBRD_USEIPS (0x1 << QUADSPI_RBCT_RXBRD_SHIFT) + +#define QUADSPI_TBSR 0x150 +#define QUADSPI_TBDR 0x154 +#define QUADSPI_SR 0x15c +#define QUADSPI_SR_IP_ACC_SHIFT 1 +#define QUADSPI_SR_IP_ACC_MASK (0x1 << QUADSPI_SR_IP_ACC_SHIFT) +#define QUADSPI_SR_AHB_ACC_SHIFT 2 +#define QUADSPI_SR_AHB_ACC_MASK (0x1 << QUADSPI_SR_AHB_ACC_SHIFT) + +#define QUADSPI_FR 0x160 +#define QUADSPI_FR_TFF_MASK 0x1 + +#define QUADSPI_SFA1AD 0x180 +#define QUADSPI_SFA2AD 0x184 +#define QUADSPI_SFB1AD 0x188 +#define QUADSPI_SFB2AD 0x18c +#define QUADSPI_RBDR 0x200 + +#define QUADSPI_LUTKEY 0x300 +#define QUADSPI_LUTKEY_VALUE 0x5AF05AF0 + +#define QUADSPI_LCKCR 0x304 +#define QUADSPI_LCKER_LOCK 0x1 +#define QUADSPI_LCKER_UNLOCK 0x2 + +#define QUADSPI_RSER 0x164 +#define QUADSPI_RSER_TFIE (0x1 << 0) + +#define QUADSPI_LUT_BASE 0x310 + +/* + * The definition of the LUT register shows below: + * + * --------------------------------------------------- + * | INSTR1 | PAD1 | OPRND1 | INSTR0 | PAD0 | OPRND0 | + * --------------------------------------------------- + */ +#define OPRND0_SHIFT 0 +#define PAD0_SHIFT 8 +#define INSTR0_SHIFT 10 +#define OPRND1_SHIFT 16 + +/* Instruction set for the LUT register. */ +#define LUT_STOP 0 +#define LUT_CMD 1 +#define LUT_ADDR 2 +#define LUT_DUMMY 3 +#define LUT_MODE 4 +#define LUT_MODE2 5 +#define LUT_MODE4 6 +#define LUT_READ 7 +#define LUT_WRITE 8 +#define LUT_JMP_ON_CS 9 +#define LUT_ADDR_DDR 10 +#define LUT_MODE_DDR 11 +#define LUT_MODE2_DDR 12 +#define LUT_MODE4_DDR 13 +#define LUT_READ_DDR 14 +#define LUT_WRITE_DDR 15 +#define LUT_DATA_LEARN 16 + +/* + * The PAD definitions for LUT register. + * + * The pad stands for the lines number of IO[0:3]. + * For example, the Quad read need four IO lines, so you should + * set LUT_PAD4 which means we use four IO lines. + */ +#define LUT_PAD1 0 +#define LUT_PAD2 1 +#define LUT_PAD4 2 + +/* Oprands for the LUT register. */ +#define ADDR24BIT 0x18 +#define ADDR32BIT 0x20 + +/* Macros for constructing the LUT register. */ +#define LUT0(ins, pad, opr) \ + (((opr) << OPRND0_SHIFT) | ((LUT_##pad) << PAD0_SHIFT) | \ + ((LUT_##ins) << INSTR0_SHIFT)) + +#define LUT1(ins, pad, opr) (LUT0(ins, pad, opr) << OPRND1_SHIFT) + +/* other macros for LUT register. */ +#define QUADSPI_LUT(x) (QUADSPI_LUT_BASE + (x) * 4) +#define QUADSPI_LUT_NUM 64 + +/* SEQID -- we can have 16 seqids at most. */ +#define SEQID_QUAD_READ 0 +#define SEQID_WREN 1 +#define SEQID_WRDI 2 +#define SEQID_RDSR 3 +#define SEQID_SE 4 +#define SEQID_CHIP_ERASE 5 +#define SEQID_PP 6 +#define SEQID_RDID 7 +#define SEQID_WRSR 8 +#define SEQID_RDCR 9 +#define SEQID_EN4B 10 +#define SEQID_BRWR 11 + +enum fsl_qspi_devtype { + FSL_QUADSPI_VYBRID, + FSL_QUADSPI_IMX6SX, +}; + +struct fsl_qspi_devtype_data { + enum fsl_qspi_devtype devtype; + int rxfifo; + int txfifo; +}; + +static struct fsl_qspi_devtype_data vybrid_data = { + .devtype = FSL_QUADSPI_VYBRID, + .rxfifo = 128, + .txfifo = 64 +}; + +static struct fsl_qspi_devtype_data imx6sx_data = { + .devtype = FSL_QUADSPI_IMX6SX, + .rxfifo = 128, + .txfifo = 512 +}; + +#define FSL_QSPI_MAX_CHIP 4 +struct fsl_qspi { + struct mtd_info mtd[FSL_QSPI_MAX_CHIP]; + struct spi_nor nor[FSL_QSPI_MAX_CHIP]; + void __iomem *iobase; + void __iomem *ahb_base; /* Used when read from AHB bus */ + u32 memmap_phy; + struct clk *clk, *clk_en; + struct device *dev; + struct completion c; + struct fsl_qspi_devtype_data *devtype_data; + u32 nor_size; + u32 nor_num; + u32 clk_rate; + unsigned int chip_base_addr; /* We may support two chips. */ +}; + +static inline int is_vybrid_qspi(struct fsl_qspi *q) +{ + return q->devtype_data->devtype == FSL_QUADSPI_VYBRID; +} + +static inline int is_imx6sx_qspi(struct fsl_qspi *q) +{ + return q->devtype_data->devtype == FSL_QUADSPI_IMX6SX; +} + +/* + * An IC bug makes us to re-arrange the 32-bit data. + * The following chips, such as IMX6SLX, have fixed this bug. + */ +static inline u32 fsl_qspi_endian_xchg(struct fsl_qspi *q, u32 a) +{ + return is_vybrid_qspi(q) ? __swab32(a) : a; +} + +static inline void fsl_qspi_unlock_lut(struct fsl_qspi *q) +{ + writel(QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY); + writel(QUADSPI_LCKER_UNLOCK, q->iobase + QUADSPI_LCKCR); +} + +static inline void fsl_qspi_lock_lut(struct fsl_qspi *q) +{ + writel(QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY); + writel(QUADSPI_LCKER_LOCK, q->iobase + QUADSPI_LCKCR); +} + +static irqreturn_t fsl_qspi_irq_handler(int irq, void *dev_id) +{ + struct fsl_qspi *q = dev_id; + u32 reg; + + /* clear interrupt */ + reg = readl(q->iobase + QUADSPI_FR); + writel(reg, q->iobase + QUADSPI_FR); + + if (reg & QUADSPI_FR_TFF_MASK) + complete(&q->c); + + dev_dbg(q->dev, "QUADSPI_FR : 0x%.8x:0x%.8x\n", q->chip_base_addr, reg); + return IRQ_HANDLED; +} + +static void fsl_qspi_init_lut(struct fsl_qspi *q) +{ + void __iomem *base = q->iobase; + int rxfifo = q->devtype_data->rxfifo; + u32 lut_base; + u8 cmd, addrlen, dummy; + int i; + + fsl_qspi_unlock_lut(q); + + /* Clear all the LUT table */ + for (i = 0; i < QUADSPI_LUT_NUM; i++) + writel(0, base + QUADSPI_LUT_BASE + i * 4); + + /* Quad Read */ + lut_base = SEQID_QUAD_READ * 4; + + if (q->nor_size <= SZ_16M) { + cmd = SPINOR_OP_READ_1_1_4; + addrlen = ADDR24BIT; + dummy = 8; + } else { + /* use the 4-byte address */ + cmd = SPINOR_OP_READ_1_1_4; + addrlen = ADDR32BIT; + dummy = 8; + } + + writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen), + base + QUADSPI_LUT(lut_base)); + writel(LUT0(DUMMY, PAD1, dummy) | LUT1(READ, PAD4, rxfifo), + base + QUADSPI_LUT(lut_base + 1)); + + /* Write enable */ + lut_base = SEQID_WREN * 4; + writel(LUT0(CMD, PAD1, SPINOR_OP_WREN), base + QUADSPI_LUT(lut_base)); + + /* Page Program */ + lut_base = SEQID_PP * 4; + + if (q->nor_size <= SZ_16M) { + cmd = SPINOR_OP_PP; + addrlen = ADDR24BIT; + } else { + /* use the 4-byte address */ + cmd = SPINOR_OP_PP; + addrlen = ADDR32BIT; + } + + writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen), + base + QUADSPI_LUT(lut_base)); + writel(LUT0(WRITE, PAD1, 0), base + QUADSPI_LUT(lut_base + 1)); + + /* Read Status */ + lut_base = SEQID_RDSR * 4; + writel(LUT0(CMD, PAD1, SPINOR_OP_RDSR) | LUT1(READ, PAD1, 0x1), + base + QUADSPI_LUT(lut_base)); + + /* Erase a sector */ + lut_base = SEQID_SE * 4; + + if (q->nor_size <= SZ_16M) { + cmd = SPINOR_OP_SE; + addrlen = ADDR24BIT; + } else { + /* use the 4-byte address */ + cmd = SPINOR_OP_SE; + addrlen = ADDR32BIT; + } + + writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen), + base + QUADSPI_LUT(lut_base)); + + /* Erase the whole chip */ + lut_base = SEQID_CHIP_ERASE * 4; + writel(LUT0(CMD, PAD1, SPINOR_OP_CHIP_ERASE), + base + QUADSPI_LUT(lut_base)); + + /* READ ID */ + lut_base = SEQID_RDID * 4; + writel(LUT0(CMD, PAD1, SPINOR_OP_RDID) | LUT1(READ, PAD1, 0x8), + base + QUADSPI_LUT(lut_base)); + + /* Write Register */ + lut_base = SEQID_WRSR * 4; + writel(LUT0(CMD, PAD1, SPINOR_OP_WRSR) | LUT1(WRITE, PAD1, 0x2), + base + QUADSPI_LUT(lut_base)); + + /* Read Configuration Register */ + lut_base = SEQID_RDCR * 4; + writel(LUT0(CMD, PAD1, SPINOR_OP_RDCR) | LUT1(READ, PAD1, 0x1), + base + QUADSPI_LUT(lut_base)); + + /* Write disable */ + lut_base = SEQID_WRDI * 4; + writel(LUT0(CMD, PAD1, SPINOR_OP_WRDI), base + QUADSPI_LUT(lut_base)); + + /* Enter 4 Byte Mode (Micron) */ + lut_base = SEQID_EN4B * 4; + writel(LUT0(CMD, PAD1, SPINOR_OP_EN4B), base + QUADSPI_LUT(lut_base)); + + /* Enter 4 Byte Mode (Spansion) */ + lut_base = SEQID_BRWR * 4; + writel(LUT0(CMD, PAD1, SPINOR_OP_BRWR), base + QUADSPI_LUT(lut_base)); + + fsl_qspi_lock_lut(q); +} + +/* Get the SEQID for the command */ +static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd) +{ + switch (cmd) { + case SPINOR_OP_READ_1_1_4: + return SEQID_QUAD_READ; + case SPINOR_OP_WREN: + return SEQID_WREN; + case SPINOR_OP_WRDI: + return SEQID_WRDI; + case SPINOR_OP_RDSR: + return SEQID_RDSR; + case SPINOR_OP_SE: + return SEQID_SE; + case SPINOR_OP_CHIP_ERASE: + return SEQID_CHIP_ERASE; + case SPINOR_OP_PP: + return SEQID_PP; + case SPINOR_OP_RDID: + return SEQID_RDID; + case SPINOR_OP_WRSR: + return SEQID_WRSR; + case SPINOR_OP_RDCR: + return SEQID_RDCR; + case SPINOR_OP_EN4B: + return SEQID_EN4B; + case SPINOR_OP_BRWR: + return SEQID_BRWR; + default: + dev_err(q->dev, "Unsupported cmd 0x%.2x\n", cmd); + break; + } + return -EINVAL; +} + +static int +fsl_qspi_runcmd(struct fsl_qspi *q, u8 cmd, unsigned int addr, int len) +{ + void __iomem *base = q->iobase; + int seqid; + u32 reg, reg2; + int err; + + init_completion(&q->c); + dev_dbg(q->dev, "to 0x%.8x:0x%.8x, len:%d, cmd:%.2x\n", + q->chip_base_addr, addr, len, cmd); + + /* save the reg */ + reg = readl(base + QUADSPI_MCR); + + writel(q->memmap_phy + q->chip_base_addr + addr, base + QUADSPI_SFAR); + writel(QUADSPI_RBCT_WMRK_MASK | QUADSPI_RBCT_RXBRD_USEIPS, + base + QUADSPI_RBCT); + writel(reg | QUADSPI_MCR_CLR_RXF_MASK, base + QUADSPI_MCR); + + do { + reg2 = readl(base + QUADSPI_SR); + if (reg2 & (QUADSPI_SR_IP_ACC_MASK | QUADSPI_SR_AHB_ACC_MASK)) { + udelay(1); + dev_dbg(q->dev, "The controller is busy, 0x%x\n", reg2); + continue; + } + break; + } while (1); + + /* trigger the LUT now */ + seqid = fsl_qspi_get_seqid(q, cmd); + writel((seqid << QUADSPI_IPCR_SEQID_SHIFT) | len, base + QUADSPI_IPCR); + + /* Wait for the interrupt. */ + err = wait_for_completion_timeout(&q->c, msecs_to_jiffies(1000)); + if (!err) { + dev_err(q->dev, + "cmd 0x%.2x timeout, addr@%.8x, FR:0x%.8x, SR:0x%.8x\n", + cmd, addr, readl(base + QUADSPI_FR), + readl(base + QUADSPI_SR)); + err = -ETIMEDOUT; + } else { + err = 0; + } + + /* restore the MCR */ + writel(reg, base + QUADSPI_MCR); + + return err; +} + +/* Read out the data from the QUADSPI_RBDR buffer registers. */ +static void fsl_qspi_read_data(struct fsl_qspi *q, int len, u8 *rxbuf) +{ + u32 tmp; + int i = 0; + + while (len > 0) { + tmp = readl(q->iobase + QUADSPI_RBDR + i * 4); + tmp = fsl_qspi_endian_xchg(q, tmp); + dev_dbg(q->dev, "chip addr:0x%.8x, rcv:0x%.8x\n", + q->chip_base_addr, tmp); + + if (len >= 4) { + *((u32 *)rxbuf) = tmp; + rxbuf += 4; + } else { + memcpy(rxbuf, &tmp, len); + break; + } + + len -= 4; + i++; + } +} + +/* + * If we have changed the content of the flash by writing or erasing, + * we need to invalidate the AHB buffer. If we do not do so, we may read out + * the wrong data. The spec tells us reset the AHB domain and Serial Flash + * domain at the same time. + */ +static inline void fsl_qspi_invalid(struct fsl_qspi *q) +{ + u32 reg; + + reg = readl(q->iobase + QUADSPI_MCR); + reg |= QUADSPI_MCR_SWRSTHD_MASK | QUADSPI_MCR_SWRSTSD_MASK; + writel(reg, q->iobase + QUADSPI_MCR); + + /* + * The minimum delay : 1 AHB + 2 SFCK clocks. + * Delay 1 us is enough. + */ + udelay(1); + + reg &= ~(QUADSPI_MCR_SWRSTHD_MASK | QUADSPI_MCR_SWRSTSD_MASK); + writel(reg, q->iobase + QUADSPI_MCR); +} + +static int fsl_qspi_nor_write(struct fsl_qspi *q, struct spi_nor *nor, + u8 opcode, unsigned int to, u32 *txbuf, + unsigned count, size_t *retlen) +{ + int ret, i, j; + u32 tmp; + + dev_dbg(q->dev, "to 0x%.8x:0x%.8x, len : %d\n", + q->chip_base_addr, to, count); + + /* clear the TX FIFO. */ + tmp = readl(q->iobase + QUADSPI_MCR); + writel(tmp | QUADSPI_MCR_CLR_RXF_MASK, q->iobase + QUADSPI_MCR); + + /* fill the TX data to the FIFO */ + for (j = 0, i = ((count + 3) / 4); j < i; j++) { + tmp = fsl_qspi_endian_xchg(q, *txbuf); + writel(tmp, q->iobase + QUADSPI_TBDR); + txbuf++; + } + + /* Trigger it */ + ret = fsl_qspi_runcmd(q, opcode, to, count); + + if (ret == 0 && retlen) + *retlen += count; + + return ret; +} + +static void fsl_qspi_set_map_addr(struct fsl_qspi *q) +{ + int nor_size = q->nor_size; + void __iomem *base = q->iobase; + + writel(nor_size + q->memmap_phy, base + QUADSPI_SFA1AD); + writel(nor_size * 2 + q->memmap_phy, base + QUADSPI_SFA2AD); + writel(nor_size * 3 + q->memmap_phy, base + QUADSPI_SFB1AD); + writel(nor_size * 4 + q->memmap_phy, base + QUADSPI_SFB2AD); +} + +/* + * There are two different ways to read out the data from the flash: + * the "IP Command Read" and the "AHB Command Read". + * + * The IC guy suggests we use the "AHB Command Read" which is faster + * then the "IP Command Read". (What's more is that there is a bug in + * the "IP Command Read" in the Vybrid.) + * + * After we set up the registers for the "AHB Command Read", we can use + * the memcpy to read the data directly. A "missed" access to the buffer + * causes the controller to clear the buffer, and use the sequence pointed + * by the QUADSPI_BFGENCR[SEQID] to initiate a read from the flash. + */ +static void fsl_qspi_init_abh_read(struct fsl_qspi *q) +{ + void __iomem *base = q->iobase; + int seqid; + + /* AHB configuration for access buffer 0/1/2 .*/ + writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF0CR); + writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF1CR); + writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF2CR); + writel(QUADSPI_BUF3CR_ALLMST, base + QUADSPI_BUF3CR); + + /* We only use the buffer3 */ + writel(0, base + QUADSPI_BUF0IND); + writel(0, base + QUADSPI_BUF1IND); + writel(0, base + QUADSPI_BUF2IND); + + /* Set the default lut sequence for AHB Read. */ + seqid = fsl_qspi_get_seqid(q, q->nor[0].read_opcode); + writel(seqid << QUADSPI_BFGENCR_SEQID_SHIFT, + q->iobase + QUADSPI_BFGENCR); +} + +/* We use this function to do some basic init for spi_nor_scan(). */ +static int fsl_qspi_nor_setup(struct fsl_qspi *q) +{ + void __iomem *base = q->iobase; + u32 reg; + int ret; + + /* the default frequency, we will change it in the future.*/ + ret = clk_set_rate(q->clk, 66000000); + if (ret) + return ret; + + /* Init the LUT table. */ + fsl_qspi_init_lut(q); + + /* Disable the module */ + writel(QUADSPI_MCR_MDIS_MASK | QUADSPI_MCR_RESERVED_MASK, + base + QUADSPI_MCR); + + reg = readl(base + QUADSPI_SMPR); + writel(reg & ~(QUADSPI_SMPR_FSDLY_MASK + | QUADSPI_SMPR_FSPHS_MASK + | QUADSPI_SMPR_HSENA_MASK + | QUADSPI_SMPR_DDRSMP_MASK), base + QUADSPI_SMPR); + + /* Enable the module */ + writel(QUADSPI_MCR_RESERVED_MASK | QUADSPI_MCR_END_CFG_MASK, + base + QUADSPI_MCR); + + /* enable the interrupt */ + writel(QUADSPI_RSER_TFIE, q->iobase + QUADSPI_RSER); + + return 0; +} + +static int fsl_qspi_nor_setup_last(struct fsl_qspi *q) +{ + unsigned long rate = q->clk_rate; + int ret; + + if (is_imx6sx_qspi(q)) + rate *= 4; + + ret = clk_set_rate(q->clk, rate); + if (ret) + return ret; + + /* Init the LUT table again. */ + fsl_qspi_init_lut(q); + + /* Init for AHB read */ + fsl_qspi_init_abh_read(q); + + return 0; +} + +static struct of_device_id fsl_qspi_dt_ids[] = { + { .compatible = "fsl,vf610-qspi", .data = (void *)&vybrid_data, }, + { .compatible = "fsl,imx6sx-qspi", .data = (void *)&imx6sx_data, }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, fsl_qspi_dt_ids); + +static void fsl_qspi_set_base_addr(struct fsl_qspi *q, struct spi_nor *nor) +{ + q->chip_base_addr = q->nor_size * (nor - q->nor); +} + +static int fsl_qspi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) +{ + int ret; + struct fsl_qspi *q = nor->priv; + + ret = fsl_qspi_runcmd(q, opcode, 0, len); + if (ret) + return ret; + + fsl_qspi_read_data(q, len, buf); + return 0; +} + +static int fsl_qspi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len, + int write_enable) +{ + struct fsl_qspi *q = nor->priv; + int ret; + + if (!buf) { + ret = fsl_qspi_runcmd(q, opcode, 0, 1); + if (ret) + return ret; + + if (opcode == SPINOR_OP_CHIP_ERASE) + fsl_qspi_invalid(q); + + } else if (len > 0) { + ret = fsl_qspi_nor_write(q, nor, opcode, 0, + (u32 *)buf, len, NULL); + } else { + dev_err(q->dev, "invalid cmd %d\n", opcode); + ret = -EINVAL; + } + + return ret; +} + +static void fsl_qspi_write(struct spi_nor *nor, loff_t to, + size_t len, size_t *retlen, const u_char *buf) +{ + struct fsl_qspi *q = nor->priv; + + fsl_qspi_nor_write(q, nor, nor->program_opcode, to, + (u32 *)buf, len, retlen); + + /* invalid the data in the AHB buffer. */ + fsl_qspi_invalid(q); +} + +static int fsl_qspi_read(struct spi_nor *nor, loff_t from, + size_t len, size_t *retlen, u_char *buf) +{ + struct fsl_qspi *q = nor->priv; + u8 cmd = nor->read_opcode; + int ret; + + dev_dbg(q->dev, "cmd [%x],read from (0x%p, 0x%.8x, 0x%.8x),len:%d\n", + cmd, q->ahb_base, q->chip_base_addr, (unsigned int)from, len); + + /* Wait until the previous command is finished. */ + ret = nor->wait_till_ready(nor); + if (ret) + return ret; + + /* Read out the data directly from the AHB buffer.*/ + memcpy(buf, q->ahb_base + q->chip_base_addr + from, len); + + *retlen += len; + return 0; +} + +static int fsl_qspi_erase(struct spi_nor *nor, loff_t offs) +{ + struct fsl_qspi *q = nor->priv; + int ret; + + dev_dbg(nor->dev, "%dKiB at 0x%08x:0x%08x\n", + nor->mtd->erasesize / 1024, q->chip_base_addr, (u32)offs); + + /* Wait until finished previous write command. */ + ret = nor->wait_till_ready(nor); + if (ret) + return ret; + + /* Send write enable, then erase commands. */ + ret = nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0, 0); + if (ret) + return ret; + + ret = fsl_qspi_runcmd(q, nor->erase_opcode, offs, 0); + if (ret) + return ret; + + fsl_qspi_invalid(q); + return 0; +} + +static int fsl_qspi_prep(struct spi_nor *nor, enum spi_nor_ops ops) +{ + struct fsl_qspi *q = nor->priv; + int ret; + + ret = clk_enable(q->clk_en); + if (ret) + return ret; + + ret = clk_enable(q->clk); + if (ret) { + clk_disable(q->clk_en); + return ret; + } + + fsl_qspi_set_base_addr(q, nor); + return 0; +} + +static void fsl_qspi_unprep(struct spi_nor *nor, enum spi_nor_ops ops) +{ + struct fsl_qspi *q = nor->priv; + + clk_disable(q->clk); + clk_disable(q->clk_en); +} + +static int fsl_qspi_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct mtd_part_parser_data ppdata; + struct device *dev = &pdev->dev; + struct fsl_qspi *q; + struct resource *res; + struct spi_nor *nor; + struct mtd_info *mtd; + int ret, i = 0; + bool has_second_chip = false; + const struct of_device_id *of_id = + of_match_device(fsl_qspi_dt_ids, &pdev->dev); + + q = devm_kzalloc(dev, sizeof(*q), GFP_KERNEL); + if (!q) + return -ENOMEM; + + q->nor_num = of_get_child_count(dev->of_node); + if (!q->nor_num || q->nor_num > FSL_QSPI_MAX_CHIP) + return -ENODEV; + + /* find the resources */ + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "QuadSPI"); + q->iobase = devm_ioremap_resource(dev, res); + if (IS_ERR(q->iobase)) { + ret = PTR_ERR(q->iobase); + goto map_failed; + } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "QuadSPI-memory"); + q->ahb_base = devm_ioremap_resource(dev, res); + if (IS_ERR(q->ahb_base)) { + ret = PTR_ERR(q->ahb_base); + goto map_failed; + } + q->memmap_phy = res->start; + + /* find the clocks */ + q->clk_en = devm_clk_get(dev, "qspi_en"); + if (IS_ERR(q->clk_en)) { + ret = PTR_ERR(q->clk_en); + goto map_failed; + } + + q->clk = devm_clk_get(dev, "qspi"); + if (IS_ERR(q->clk)) { + ret = PTR_ERR(q->clk); + goto map_failed; + } + + ret = clk_prepare_enable(q->clk_en); + if (ret) { + dev_err(dev, "can not enable the qspi_en clock\n"); + goto map_failed; + } + + ret = clk_prepare_enable(q->clk); + if (ret) { + clk_disable_unprepare(q->clk_en); + dev_err(dev, "can not enable the qspi clock\n"); + goto map_failed; + } + + /* find the irq */ + ret = platform_get_irq(pdev, 0); + if (ret < 0) { + dev_err(dev, "failed to get the irq\n"); + goto irq_failed; + } + + ret = devm_request_irq(dev, ret, + fsl_qspi_irq_handler, 0, pdev->name, q); + if (ret) { + dev_err(dev, "failed to request irq.\n"); + goto irq_failed; + } + + q->dev = dev; + q->devtype_data = (struct fsl_qspi_devtype_data *)of_id->data; + platform_set_drvdata(pdev, q); + + ret = fsl_qspi_nor_setup(q); + if (ret) + goto irq_failed; + + if (of_get_property(np, "fsl,qspi-has-second-chip", NULL)) + has_second_chip = true; + + /* iterate the subnodes. */ + for_each_available_child_of_node(dev->of_node, np) { + const struct spi_device_id *id; + char modalias[40]; + + /* skip the holes */ + if (!has_second_chip) + i *= 2; + + nor = &q->nor[i]; + mtd = &q->mtd[i]; + + nor->mtd = mtd; + nor->dev = dev; + nor->priv = q; + mtd->priv = nor; + + /* fill the hooks */ + nor->read_reg = fsl_qspi_read_reg; + nor->write_reg = fsl_qspi_write_reg; + nor->read = fsl_qspi_read; + nor->write = fsl_qspi_write; + nor->erase = fsl_qspi_erase; + + nor->prepare = fsl_qspi_prep; + nor->unprepare = fsl_qspi_unprep; + + if (of_modalias_node(np, modalias, sizeof(modalias)) < 0) + goto map_failed; + + id = spi_nor_match_id(modalias); + if (!id) + goto map_failed; + + ret = of_property_read_u32(np, "spi-max-frequency", + &q->clk_rate); + if (ret < 0) + goto map_failed; + + /* set the chip address for READID */ + fsl_qspi_set_base_addr(q, nor); + + ret = spi_nor_scan(nor, id, SPI_NOR_QUAD); + if (ret) + goto map_failed; + + ppdata.of_node = np; + ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0); + if (ret) + goto map_failed; + + /* Set the correct NOR size now. */ + if (q->nor_size == 0) { + q->nor_size = mtd->size; + + /* Map the SPI NOR to accessiable address */ + fsl_qspi_set_map_addr(q); + } + + /* + * The TX FIFO is 64 bytes in the Vybrid, but the Page Program + * may writes 265 bytes per time. The write is working in the + * unit of the TX FIFO, not in the unit of the SPI NOR's page + * size. + * + * So shrink the spi_nor->page_size if it is larger then the + * TX FIFO. + */ + if (nor->page_size > q->devtype_data->txfifo) + nor->page_size = q->devtype_data->txfifo; + + i++; + } + + /* finish the rest init. */ + ret = fsl_qspi_nor_setup_last(q); + if (ret) + goto last_init_failed; + + clk_disable(q->clk); + clk_disable(q->clk_en); + dev_info(dev, "QuadSPI SPI NOR flash driver\n"); + return 0; + +last_init_failed: + for (i = 0; i < q->nor_num; i++) + mtd_device_unregister(&q->mtd[i]); + +irq_failed: + clk_disable_unprepare(q->clk); + clk_disable_unprepare(q->clk_en); +map_failed: + dev_err(dev, "Freescale QuadSPI probe failed\n"); + return ret; +} + +static int fsl_qspi_remove(struct platform_device *pdev) +{ + struct fsl_qspi *q = platform_get_drvdata(pdev); + int i; + + for (i = 0; i < q->nor_num; i++) + mtd_device_unregister(&q->mtd[i]); + + /* disable the hardware */ + writel(QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR); + writel(0x0, q->iobase + QUADSPI_RSER); + + clk_unprepare(q->clk); + clk_unprepare(q->clk_en); + return 0; +} + +static struct platform_driver fsl_qspi_driver = { + .driver = { + .name = "fsl-quadspi", + .bus = &platform_bus_type, + .owner = THIS_MODULE, + .of_match_table = fsl_qspi_dt_ids, + }, + .probe = fsl_qspi_probe, + .remove = fsl_qspi_remove, +}; +module_platform_driver(fsl_qspi_driver); + +MODULE_DESCRIPTION("Freescale QuadSPI Controller Driver"); +MODULE_AUTHOR("Freescale Semiconductor Inc."); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c new file mode 100644 index 00000000000..c713c865671 --- /dev/null +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -0,0 +1,1107 @@ +/* + * Based on m25p80.c, by Mike Lavender (mike@steroidmicros.com), with + * influence from lart.c (Abraham Van Der Merwe) and mtd_dataflash.c + * + * Copyright (C) 2005, Intec Automation Inc. + * Copyright (C) 2014, Freescale Semiconductor, Inc. + * + * This code is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/mutex.h> +#include <linux/math64.h> + +#include <linux/mtd/cfi.h> +#include <linux/mtd/mtd.h> +#include <linux/of_platform.h> +#include <linux/spi/flash.h> +#include <linux/mtd/spi-nor.h> + +/* Define max times to check status register before we give up. */ +#define MAX_READY_WAIT_JIFFIES (40 * HZ) /* M25P16 specs 40s max chip erase */ + +#define JEDEC_MFR(_jedec_id) ((_jedec_id) >> 16) + +/* + * Read the status register, returning its value in the location + * Return the status register value. + * Returns negative if error occurred. + */ +static int read_sr(struct spi_nor *nor) +{ + int ret; + u8 val; + + ret = nor->read_reg(nor, SPINOR_OP_RDSR, &val, 1); + if (ret < 0) { + pr_err("error %d reading SR\n", (int) ret); + return ret; + } + + return val; +} + +/* + * Read configuration register, returning its value in the + * location. Return the configuration register value. + * Returns negative if error occured. + */ +static int read_cr(struct spi_nor *nor) +{ + int ret; + u8 val; + + ret = nor->read_reg(nor, SPINOR_OP_RDCR, &val, 1); + if (ret < 0) { + dev_err(nor->dev, "error %d reading CR\n", ret); + return ret; + } + + return val; +} + +/* + * Dummy Cycle calculation for different type of read. + * It can be used to support more commands with + * different dummy cycle requirements. + */ +static inline int spi_nor_read_dummy_cycles(struct spi_nor *nor) +{ + switch (nor->flash_read) { + case SPI_NOR_FAST: + case SPI_NOR_DUAL: + case SPI_NOR_QUAD: + return 1; + case SPI_NOR_NORMAL: + return 0; + } + return 0; +} + +/* + * Write status register 1 byte + * Returns negative if error occurred. + */ +static inline int write_sr(struct spi_nor *nor, u8 val) +{ + nor->cmd_buf[0] = val; + return nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 1, 0); +} + +/* + * Set write enable latch with Write Enable command. + * Returns negative if error occurred. + */ +static inline int write_enable(struct spi_nor *nor) +{ + return nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0, 0); +} + +/* + * Send write disble instruction to the chip. + */ +static inline int write_disable(struct spi_nor *nor) +{ + return nor->write_reg(nor, SPINOR_OP_WRDI, NULL, 0, 0); +} + +static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd) +{ + return mtd->priv; +} + +/* Enable/disable 4-byte addressing mode. */ +static inline int set_4byte(struct spi_nor *nor, u32 jedec_id, int enable) +{ + int status; + bool need_wren = false; + u8 cmd; + + switch (JEDEC_MFR(jedec_id)) { + case CFI_MFR_ST: /* Micron, actually */ + /* Some Micron need WREN command; all will accept it */ + need_wren = true; + case CFI_MFR_MACRONIX: + case 0xEF /* winbond */: + if (need_wren) + write_enable(nor); + + cmd = enable ? SPINOR_OP_EN4B : SPINOR_OP_EX4B; + status = nor->write_reg(nor, cmd, NULL, 0, 0); + if (need_wren) + write_disable(nor); + + return status; + default: + /* Spansion style */ + nor->cmd_buf[0] = enable << 7; + return nor->write_reg(nor, SPINOR_OP_BRWR, nor->cmd_buf, 1, 0); + } +} + +static int spi_nor_wait_till_ready(struct spi_nor *nor) +{ + unsigned long deadline; + int sr; + + deadline = jiffies + MAX_READY_WAIT_JIFFIES; + + do { + cond_resched(); + + sr = read_sr(nor); + if (sr < 0) + break; + else if (!(sr & SR_WIP)) + return 0; + } while (!time_after_eq(jiffies, deadline)); + + return -ETIMEDOUT; +} + +/* + * Service routine to read status register until ready, or timeout occurs. + * Returns non-zero if error. + */ +static int wait_till_ready(struct spi_nor *nor) +{ + return nor->wait_till_ready(nor); +} + +/* + * Erase the whole flash memory + * + * Returns 0 if successful, non-zero otherwise. + */ +static int erase_chip(struct spi_nor *nor) +{ + int ret; + + dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd->size >> 10)); + + /* Wait until finished previous write command. */ + ret = wait_till_ready(nor); + if (ret) + return ret; + + /* Send write enable, then erase commands. */ + write_enable(nor); + + return nor->write_reg(nor, SPINOR_OP_CHIP_ERASE, NULL, 0, 0); +} + +static int spi_nor_lock_and_prep(struct spi_nor *nor, enum spi_nor_ops ops) +{ + int ret = 0; + + mutex_lock(&nor->lock); + + if (nor->prepare) { + ret = nor->prepare(nor, ops); + if (ret) { + dev_err(nor->dev, "failed in the preparation.\n"); + mutex_unlock(&nor->lock); + return ret; + } + } + return ret; +} + +static void spi_nor_unlock_and_unprep(struct spi_nor *nor, enum spi_nor_ops ops) +{ + if (nor->unprepare) + nor->unprepare(nor, ops); + mutex_unlock(&nor->lock); +} + +/* + * Erase an address range on the nor chip. The address range may extend + * one or more erase sectors. Return an error is there is a problem erasing. + */ +static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr) +{ + struct spi_nor *nor = mtd_to_spi_nor(mtd); + u32 addr, len; + uint32_t rem; + int ret; + + dev_dbg(nor->dev, "at 0x%llx, len %lld\n", (long long)instr->addr, + (long long)instr->len); + + div_u64_rem(instr->len, mtd->erasesize, &rem); + if (rem) + return -EINVAL; + + addr = instr->addr; + len = instr->len; + + ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_ERASE); + if (ret) + return ret; + + /* whole-chip erase? */ + if (len == mtd->size) { + if (erase_chip(nor)) { + ret = -EIO; + goto erase_err; + } + + /* REVISIT in some cases we could speed up erasing large regions + * by using SPINOR_OP_SE instead of SPINOR_OP_BE_4K. We may have set up + * to use "small sector erase", but that's not always optimal. + */ + + /* "sector"-at-a-time erase */ + } else { + while (len) { + if (nor->erase(nor, addr)) { + ret = -EIO; + goto erase_err; + } + + addr += mtd->erasesize; + len -= mtd->erasesize; + } + } + + spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE); + + instr->state = MTD_ERASE_DONE; + mtd_erase_callback(instr); + + return ret; + +erase_err: + spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE); + instr->state = MTD_ERASE_FAILED; + return ret; +} + +static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) +{ + struct spi_nor *nor = mtd_to_spi_nor(mtd); + uint32_t offset = ofs; + uint8_t status_old, status_new; + int ret = 0; + + ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_LOCK); + if (ret) + return ret; + + /* Wait until finished previous command */ + ret = wait_till_ready(nor); + if (ret) + goto err; + + status_old = read_sr(nor); + + if (offset < mtd->size - (mtd->size / 2)) + status_new = status_old | SR_BP2 | SR_BP1 | SR_BP0; + else if (offset < mtd->size - (mtd->size / 4)) + status_new = (status_old & ~SR_BP0) | SR_BP2 | SR_BP1; + else if (offset < mtd->size - (mtd->size / 8)) + status_new = (status_old & ~SR_BP1) | SR_BP2 | SR_BP0; + else if (offset < mtd->size - (mtd->size / 16)) + status_new = (status_old & ~(SR_BP0 | SR_BP1)) | SR_BP2; + else if (offset < mtd->size - (mtd->size / 32)) + status_new = (status_old & ~SR_BP2) | SR_BP1 | SR_BP0; + else if (offset < mtd->size - (mtd->size / 64)) + status_new = (status_old & ~(SR_BP2 | SR_BP0)) | SR_BP1; + else + status_new = (status_old & ~(SR_BP2 | SR_BP1)) | SR_BP0; + + /* Only modify protection if it will not unlock other areas */ + if ((status_new & (SR_BP2 | SR_BP1 | SR_BP0)) > + (status_old & (SR_BP2 | SR_BP1 | SR_BP0))) { + write_enable(nor); + ret = write_sr(nor, status_new); + if (ret) + goto err; + } + +err: + spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_LOCK); + return ret; +} + +static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) +{ + struct spi_nor *nor = mtd_to_spi_nor(mtd); + uint32_t offset = ofs; + uint8_t status_old, status_new; + int ret = 0; + + ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_UNLOCK); + if (ret) + return ret; + + /* Wait until finished previous command */ + ret = wait_till_ready(nor); + if (ret) + goto err; + + status_old = read_sr(nor); + + if (offset+len > mtd->size - (mtd->size / 64)) + status_new = status_old & ~(SR_BP2 | SR_BP1 | SR_BP0); + else if (offset+len > mtd->size - (mtd->size / 32)) + status_new = (status_old & ~(SR_BP2 | SR_BP1)) | SR_BP0; + else if (offset+len > mtd->size - (mtd->size / 16)) + status_new = (status_old & ~(SR_BP2 | SR_BP0)) | SR_BP1; + else if (offset+len > mtd->size - (mtd->size / 8)) + status_new = (status_old & ~SR_BP2) | SR_BP1 | SR_BP0; + else if (offset+len > mtd->size - (mtd->size / 4)) + status_new = (status_old & ~(SR_BP0 | SR_BP1)) | SR_BP2; + else if (offset+len > mtd->size - (mtd->size / 2)) + status_new = (status_old & ~SR_BP1) | SR_BP2 | SR_BP0; + else + status_new = (status_old & ~SR_BP0) | SR_BP2 | SR_BP1; + + /* Only modify protection if it will not lock other areas */ + if ((status_new & (SR_BP2 | SR_BP1 | SR_BP0)) < + (status_old & (SR_BP2 | SR_BP1 | SR_BP0))) { + write_enable(nor); + ret = write_sr(nor, status_new); + if (ret) + goto err; + } + +err: + spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_UNLOCK); + return ret; +} + +struct flash_info { + /* JEDEC id zero means "no ID" (most older chips); otherwise it has + * a high byte of zero plus three data bytes: the manufacturer id, + * then a two byte device id. + */ + u32 jedec_id; + u16 ext_id; + + /* The size listed here is what works with SPINOR_OP_SE, which isn't + * necessarily called a "sector" by the vendor. + */ + unsigned sector_size; + u16 n_sectors; + + u16 page_size; + u16 addr_width; + + u16 flags; +#define SECT_4K 0x01 /* SPINOR_OP_BE_4K works uniformly */ +#define SPI_NOR_NO_ERASE 0x02 /* No erase command needed */ +#define SST_WRITE 0x04 /* use SST byte programming */ +#define SPI_NOR_NO_FR 0x08 /* Can't do fastread */ +#define SECT_4K_PMC 0x10 /* SPINOR_OP_BE_4K_PMC works uniformly */ +#define SPI_NOR_DUAL_READ 0x20 /* Flash supports Dual Read */ +#define SPI_NOR_QUAD_READ 0x40 /* Flash supports Quad Read */ +}; + +#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \ + ((kernel_ulong_t)&(struct flash_info) { \ + .jedec_id = (_jedec_id), \ + .ext_id = (_ext_id), \ + .sector_size = (_sector_size), \ + .n_sectors = (_n_sectors), \ + .page_size = 256, \ + .flags = (_flags), \ + }) + +#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width, _flags) \ + ((kernel_ulong_t)&(struct flash_info) { \ + .sector_size = (_sector_size), \ + .n_sectors = (_n_sectors), \ + .page_size = (_page_size), \ + .addr_width = (_addr_width), \ + .flags = (_flags), \ + }) + +/* NOTE: double check command sets and memory organization when you add + * more nor chips. This current list focusses on newer chips, which + * have been converging on command sets which including JEDEC ID. + */ +const struct spi_device_id spi_nor_ids[] = { + /* Atmel -- some are (confusingly) marketed as "DataFlash" */ + { "at25fs010", INFO(0x1f6601, 0, 32 * 1024, 4, SECT_4K) }, + { "at25fs040", INFO(0x1f6604, 0, 64 * 1024, 8, SECT_4K) }, + + { "at25df041a", INFO(0x1f4401, 0, 64 * 1024, 8, SECT_4K) }, + { "at25df321a", INFO(0x1f4701, 0, 64 * 1024, 64, SECT_4K) }, + { "at25df641", INFO(0x1f4800, 0, 64 * 1024, 128, SECT_4K) }, + + { "at26f004", INFO(0x1f0400, 0, 64 * 1024, 8, SECT_4K) }, + { "at26df081a", INFO(0x1f4501, 0, 64 * 1024, 16, SECT_4K) }, + { "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32, SECT_4K) }, + { "at26df321", INFO(0x1f4700, 0, 64 * 1024, 64, SECT_4K) }, + + { "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16, SECT_4K) }, + + /* EON -- en25xxx */ + { "en25f32", INFO(0x1c3116, 0, 64 * 1024, 64, SECT_4K) }, + { "en25p32", INFO(0x1c2016, 0, 64 * 1024, 64, 0) }, + { "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64, 0) }, + { "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) }, + { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) }, + { "en25qh256", INFO(0x1c7019, 0, 64 * 1024, 512, 0) }, + + /* ESMT */ + { "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, SECT_4K) }, + + /* Everspin */ + { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, + { "mr25h10", CAT25_INFO(128 * 1024, 1, 256, 3, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, + + /* GigaDevice */ + { "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64, SECT_4K) }, + { "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128, SECT_4K) }, + + /* Intel/Numonyx -- xxxs33b */ + { "160s33b", INFO(0x898911, 0, 64 * 1024, 32, 0) }, + { "320s33b", INFO(0x898912, 0, 64 * 1024, 64, 0) }, + { "640s33b", INFO(0x898913, 0, 64 * 1024, 128, 0) }, + + /* Macronix */ + { "mx25l2005a", INFO(0xc22012, 0, 64 * 1024, 4, SECT_4K) }, + { "mx25l4005a", INFO(0xc22013, 0, 64 * 1024, 8, SECT_4K) }, + { "mx25l8005", INFO(0xc22014, 0, 64 * 1024, 16, 0) }, + { "mx25l1606e", INFO(0xc22015, 0, 64 * 1024, 32, SECT_4K) }, + { "mx25l3205d", INFO(0xc22016, 0, 64 * 1024, 64, 0) }, + { "mx25l3255e", INFO(0xc29e16, 0, 64 * 1024, 64, SECT_4K) }, + { "mx25l6405d", INFO(0xc22017, 0, 64 * 1024, 128, 0) }, + { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) }, + { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) }, + { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) }, + { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) }, + { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_QUAD_READ) }, + { "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) }, + + /* Micron */ + { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, 0) }, + { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, 0) }, + { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, 0) }, + { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K) }, + { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K) }, + + /* PMC */ + { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) }, + { "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K_PMC) }, + { "pm25lq032", INFO(0x7f9d46, 0, 64 * 1024, 64, SECT_4K) }, + + /* Spansion -- single (large) sector size only, at least + * for the chips listed here (without boot sectors). + */ + { "s25sl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "s25sl064p", INFO(0x010216, 0x4d00, 64 * 1024, 128, 0) }, + { "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, 0) }, + { "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "s25fl512s", INFO(0x010220, 0x4d00, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "s70fl01gs", INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) }, + { "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) }, + { "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) }, + { "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64, 0) }, + { "s25fl129p1", INFO(0x012018, 0x4d01, 64 * 1024, 256, 0) }, + { "s25sl004a", INFO(0x010212, 0, 64 * 1024, 8, 0) }, + { "s25sl008a", INFO(0x010213, 0, 64 * 1024, 16, 0) }, + { "s25sl016a", INFO(0x010214, 0, 64 * 1024, 32, 0) }, + { "s25sl032a", INFO(0x010215, 0, 64 * 1024, 64, 0) }, + { "s25sl064a", INFO(0x010216, 0, 64 * 1024, 128, 0) }, + { "s25fl008k", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) }, + { "s25fl016k", INFO(0xef4015, 0, 64 * 1024, 32, SECT_4K) }, + { "s25fl064k", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) }, + + /* SST -- large erase sizes are "overlays", "sectors" are 4K */ + { "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) }, + { "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) }, + { "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32, SECT_4K | SST_WRITE) }, + { "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64, SECT_4K | SST_WRITE) }, + { "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128, SECT_4K) }, + { "sst25wf512", INFO(0xbf2501, 0, 64 * 1024, 1, SECT_4K | SST_WRITE) }, + { "sst25wf010", INFO(0xbf2502, 0, 64 * 1024, 2, SECT_4K | SST_WRITE) }, + { "sst25wf020", INFO(0xbf2503, 0, 64 * 1024, 4, SECT_4K | SST_WRITE) }, + { "sst25wf040", INFO(0xbf2504, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) }, + + /* ST Microelectronics -- newer production may have feature updates */ + { "m25p05", INFO(0x202010, 0, 32 * 1024, 2, 0) }, + { "m25p10", INFO(0x202011, 0, 32 * 1024, 4, 0) }, + { "m25p20", INFO(0x202012, 0, 64 * 1024, 4, 0) }, + { "m25p40", INFO(0x202013, 0, 64 * 1024, 8, 0) }, + { "m25p80", INFO(0x202014, 0, 64 * 1024, 16, 0) }, + { "m25p16", INFO(0x202015, 0, 64 * 1024, 32, 0) }, + { "m25p32", INFO(0x202016, 0, 64 * 1024, 64, 0) }, + { "m25p64", INFO(0x202017, 0, 64 * 1024, 128, 0) }, + { "m25p128", INFO(0x202018, 0, 256 * 1024, 64, 0) }, + { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, 0) }, + + { "m25p05-nonjedec", INFO(0, 0, 32 * 1024, 2, 0) }, + { "m25p10-nonjedec", INFO(0, 0, 32 * 1024, 4, 0) }, + { "m25p20-nonjedec", INFO(0, 0, 64 * 1024, 4, 0) }, + { "m25p40-nonjedec", INFO(0, 0, 64 * 1024, 8, 0) }, + { "m25p80-nonjedec", INFO(0, 0, 64 * 1024, 16, 0) }, + { "m25p16-nonjedec", INFO(0, 0, 64 * 1024, 32, 0) }, + { "m25p32-nonjedec", INFO(0, 0, 64 * 1024, 64, 0) }, + { "m25p64-nonjedec", INFO(0, 0, 64 * 1024, 128, 0) }, + { "m25p128-nonjedec", INFO(0, 0, 256 * 1024, 64, 0) }, + + { "m45pe10", INFO(0x204011, 0, 64 * 1024, 2, 0) }, + { "m45pe80", INFO(0x204014, 0, 64 * 1024, 16, 0) }, + { "m45pe16", INFO(0x204015, 0, 64 * 1024, 32, 0) }, + + { "m25pe20", INFO(0x208012, 0, 64 * 1024, 4, 0) }, + { "m25pe80", INFO(0x208014, 0, 64 * 1024, 16, 0) }, + { "m25pe16", INFO(0x208015, 0, 64 * 1024, 32, SECT_4K) }, + + { "m25px16", INFO(0x207115, 0, 64 * 1024, 32, SECT_4K) }, + { "m25px32", INFO(0x207116, 0, 64 * 1024, 64, SECT_4K) }, + { "m25px32-s0", INFO(0x207316, 0, 64 * 1024, 64, SECT_4K) }, + { "m25px32-s1", INFO(0x206316, 0, 64 * 1024, 64, SECT_4K) }, + { "m25px64", INFO(0x207117, 0, 64 * 1024, 128, 0) }, + + /* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */ + { "w25x10", INFO(0xef3011, 0, 64 * 1024, 2, SECT_4K) }, + { "w25x20", INFO(0xef3012, 0, 64 * 1024, 4, SECT_4K) }, + { "w25x40", INFO(0xef3013, 0, 64 * 1024, 8, SECT_4K) }, + { "w25x80", INFO(0xef3014, 0, 64 * 1024, 16, SECT_4K) }, + { "w25x16", INFO(0xef3015, 0, 64 * 1024, 32, SECT_4K) }, + { "w25x32", INFO(0xef3016, 0, 64 * 1024, 64, SECT_4K) }, + { "w25q32", INFO(0xef4016, 0, 64 * 1024, 64, SECT_4K) }, + { "w25q32dw", INFO(0xef6016, 0, 64 * 1024, 64, SECT_4K) }, + { "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) }, + { "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) }, + { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) }, + { "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) }, + { "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) }, + { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) }, + { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K) }, + + /* Catalyst / On Semiconductor -- non-JEDEC */ + { "cat25c11", CAT25_INFO( 16, 8, 16, 1, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, + { "cat25c03", CAT25_INFO( 32, 8, 16, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, + { "cat25c09", CAT25_INFO( 128, 8, 32, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, + { "cat25c17", CAT25_INFO( 256, 8, 32, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, + { "cat25128", CAT25_INFO(2048, 8, 64, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, + { }, +}; +EXPORT_SYMBOL_GPL(spi_nor_ids); + +static const struct spi_device_id *spi_nor_read_id(struct spi_nor *nor) +{ + int tmp; + u8 id[5]; + u32 jedec; + u16 ext_jedec; + struct flash_info *info; + + tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, 5); + if (tmp < 0) { + dev_dbg(nor->dev, " error %d reading JEDEC ID\n", tmp); + return ERR_PTR(tmp); + } + jedec = id[0]; + jedec = jedec << 8; + jedec |= id[1]; + jedec = jedec << 8; + jedec |= id[2]; + + ext_jedec = id[3] << 8 | id[4]; + + for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) { + info = (void *)spi_nor_ids[tmp].driver_data; + if (info->jedec_id == jedec) { + if (info->ext_id == 0 || info->ext_id == ext_jedec) + return &spi_nor_ids[tmp]; + } + } + dev_err(nor->dev, "unrecognized JEDEC id %06x\n", jedec); + return ERR_PTR(-ENODEV); +} + +static const struct spi_device_id *jedec_probe(struct spi_nor *nor) +{ + return nor->read_id(nor); +} + +static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) +{ + struct spi_nor *nor = mtd_to_spi_nor(mtd); + int ret; + + dev_dbg(nor->dev, "from 0x%08x, len %zd\n", (u32)from, len); + + ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_READ); + if (ret) + return ret; + + ret = nor->read(nor, from, len, retlen, buf); + + spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_READ); + return ret; +} + +static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) +{ + struct spi_nor *nor = mtd_to_spi_nor(mtd); + size_t actual; + int ret; + + dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len); + + ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_WRITE); + if (ret) + return ret; + + /* Wait until finished previous write command. */ + ret = wait_till_ready(nor); + if (ret) + goto time_out; + + write_enable(nor); + + nor->sst_write_second = false; + + actual = to % 2; + /* Start write from odd address. */ + if (actual) { + nor->program_opcode = SPINOR_OP_BP; + + /* write one byte. */ + nor->write(nor, to, 1, retlen, buf); + ret = wait_till_ready(nor); + if (ret) + goto time_out; + } + to += actual; + + /* Write out most of the data here. */ + for (; actual < len - 1; actual += 2) { + nor->program_opcode = SPINOR_OP_AAI_WP; + + /* write two bytes. */ + nor->write(nor, to, 2, retlen, buf + actual); + ret = wait_till_ready(nor); + if (ret) + goto time_out; + to += 2; + nor->sst_write_second = true; + } + nor->sst_write_second = false; + + write_disable(nor); + ret = wait_till_ready(nor); + if (ret) + goto time_out; + + /* Write out trailing byte if it exists. */ + if (actual != len) { + write_enable(nor); + + nor->program_opcode = SPINOR_OP_BP; + nor->write(nor, to, 1, retlen, buf + actual); + + ret = wait_till_ready(nor); + if (ret) + goto time_out; + write_disable(nor); + } +time_out: + spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE); + return ret; +} + +/* + * Write an address range to the nor chip. Data must be written in + * FLASH_PAGESIZE chunks. The address range may be any size provided + * it is within the physical boundaries. + */ +static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) +{ + struct spi_nor *nor = mtd_to_spi_nor(mtd); + u32 page_offset, page_size, i; + int ret; + + dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len); + + ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_WRITE); + if (ret) + return ret; + + /* Wait until finished previous write command. */ + ret = wait_till_ready(nor); + if (ret) + goto write_err; + + write_enable(nor); + + page_offset = to & (nor->page_size - 1); + + /* do all the bytes fit onto one page? */ + if (page_offset + len <= nor->page_size) { + nor->write(nor, to, len, retlen, buf); + } else { + /* the size of data remaining on the first page */ + page_size = nor->page_size - page_offset; + nor->write(nor, to, page_size, retlen, buf); + + /* write everything in nor->page_size chunks */ + for (i = page_size; i < len; i += page_size) { + page_size = len - i; + if (page_size > nor->page_size) + page_size = nor->page_size; + + wait_till_ready(nor); + write_enable(nor); + + nor->write(nor, to + i, page_size, retlen, buf + i); + } + } + +write_err: + spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE); + return 0; +} + +static int macronix_quad_enable(struct spi_nor *nor) +{ + int ret, val; + + val = read_sr(nor); + write_enable(nor); + + nor->cmd_buf[0] = val | SR_QUAD_EN_MX; + nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 1, 0); + + if (wait_till_ready(nor)) + return 1; + + ret = read_sr(nor); + if (!(ret > 0 && (ret & SR_QUAD_EN_MX))) { + dev_err(nor->dev, "Macronix Quad bit not set\n"); + return -EINVAL; + } + + return 0; +} + +/* + * Write status Register and configuration register with 2 bytes + * The first byte will be written to the status register, while the + * second byte will be written to the configuration register. + * Return negative if error occured. + */ +static int write_sr_cr(struct spi_nor *nor, u16 val) +{ + nor->cmd_buf[0] = val & 0xff; + nor->cmd_buf[1] = (val >> 8); + + return nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 2, 0); +} + +static int spansion_quad_enable(struct spi_nor *nor) +{ + int ret; + int quad_en = CR_QUAD_EN_SPAN << 8; + + write_enable(nor); + + ret = write_sr_cr(nor, quad_en); + if (ret < 0) { + dev_err(nor->dev, + "error while writing configuration register\n"); + return -EINVAL; + } + + /* read back and check it */ + ret = read_cr(nor); + if (!(ret > 0 && (ret & CR_QUAD_EN_SPAN))) { + dev_err(nor->dev, "Spansion Quad bit not set\n"); + return -EINVAL; + } + + return 0; +} + +static int set_quad_mode(struct spi_nor *nor, u32 jedec_id) +{ + int status; + + switch (JEDEC_MFR(jedec_id)) { + case CFI_MFR_MACRONIX: + status = macronix_quad_enable(nor); + if (status) { + dev_err(nor->dev, "Macronix quad-read not enabled\n"); + return -EINVAL; + } + return status; + default: + status = spansion_quad_enable(nor); + if (status) { + dev_err(nor->dev, "Spansion quad-read not enabled\n"); + return -EINVAL; + } + return status; + } +} + +static int spi_nor_check(struct spi_nor *nor) +{ + if (!nor->dev || !nor->read || !nor->write || + !nor->read_reg || !nor->write_reg || !nor->erase) { + pr_err("spi-nor: please fill all the necessary fields!\n"); + return -EINVAL; + } + + if (!nor->read_id) + nor->read_id = spi_nor_read_id; + if (!nor->wait_till_ready) + nor->wait_till_ready = spi_nor_wait_till_ready; + + return 0; +} + +int spi_nor_scan(struct spi_nor *nor, const struct spi_device_id *id, + enum read_mode mode) +{ + struct flash_info *info; + struct flash_platform_data *data; + struct device *dev = nor->dev; + struct mtd_info *mtd = nor->mtd; + struct device_node *np = dev->of_node; + int ret; + int i; + + ret = spi_nor_check(nor); + if (ret) + return ret; + + /* Platform data helps sort out which chip type we have, as + * well as how this board partitions it. If we don't have + * a chip ID, try the JEDEC id commands; they'll work for most + * newer chips, even if we don't recognize the particular chip. + */ + data = dev_get_platdata(dev); + if (data && data->type) { + const struct spi_device_id *plat_id; + + for (i = 0; i < ARRAY_SIZE(spi_nor_ids) - 1; i++) { + plat_id = &spi_nor_ids[i]; + if (strcmp(data->type, plat_id->name)) + continue; + break; + } + + if (i < ARRAY_SIZE(spi_nor_ids) - 1) + id = plat_id; + else + dev_warn(dev, "unrecognized id %s\n", data->type); + } + + info = (void *)id->driver_data; + + if (info->jedec_id) { + const struct spi_device_id *jid; + + jid = jedec_probe(nor); + if (IS_ERR(jid)) { + return PTR_ERR(jid); + } else if (jid != id) { + /* + * JEDEC knows better, so overwrite platform ID. We + * can't trust partitions any longer, but we'll let + * mtd apply them anyway, since some partitions may be + * marked read-only, and we don't want to lose that + * information, even if it's not 100% accurate. + */ + dev_warn(dev, "found %s, expected %s\n", + jid->name, id->name); + id = jid; + info = (void *)jid->driver_data; + } + } + + mutex_init(&nor->lock); + + /* + * Atmel, SST and Intel/Numonyx serial nor tend to power + * up with the software protection bits set + */ + + if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ATMEL || + JEDEC_MFR(info->jedec_id) == CFI_MFR_INTEL || + JEDEC_MFR(info->jedec_id) == CFI_MFR_SST) { + write_enable(nor); + write_sr(nor, 0); + } + + if (data && data->name) + mtd->name = data->name; + else + mtd->name = dev_name(dev); + + mtd->type = MTD_NORFLASH; + mtd->writesize = 1; + mtd->flags = MTD_CAP_NORFLASH; + mtd->size = info->sector_size * info->n_sectors; + mtd->_erase = spi_nor_erase; + mtd->_read = spi_nor_read; + + /* nor protection support for STmicro chips */ + if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ST) { + mtd->_lock = spi_nor_lock; + mtd->_unlock = spi_nor_unlock; + } + + /* sst nor chips use AAI word program */ + if (info->flags & SST_WRITE) + mtd->_write = sst_write; + else + mtd->_write = spi_nor_write; + + /* prefer "small sector" erase if possible */ + if (info->flags & SECT_4K) { + nor->erase_opcode = SPINOR_OP_BE_4K; + mtd->erasesize = 4096; + } else if (info->flags & SECT_4K_PMC) { + nor->erase_opcode = SPINOR_OP_BE_4K_PMC; + mtd->erasesize = 4096; + } else { + nor->erase_opcode = SPINOR_OP_SE; + mtd->erasesize = info->sector_size; + } + + if (info->flags & SPI_NOR_NO_ERASE) + mtd->flags |= MTD_NO_ERASE; + + mtd->dev.parent = dev; + nor->page_size = info->page_size; + mtd->writebufsize = nor->page_size; + + if (np) { + /* If we were instantiated by DT, use it */ + if (of_property_read_bool(np, "m25p,fast-read")) + nor->flash_read = SPI_NOR_FAST; + else + nor->flash_read = SPI_NOR_NORMAL; + } else { + /* If we weren't instantiated by DT, default to fast-read */ + nor->flash_read = SPI_NOR_FAST; + } + + /* Some devices cannot do fast-read, no matter what DT tells us */ + if (info->flags & SPI_NOR_NO_FR) + nor->flash_read = SPI_NOR_NORMAL; + + /* Quad/Dual-read mode takes precedence over fast/normal */ + if (mode == SPI_NOR_QUAD && info->flags & SPI_NOR_QUAD_READ) { + ret = set_quad_mode(nor, info->jedec_id); + if (ret) { + dev_err(dev, "quad mode not supported\n"); + return ret; + } + nor->flash_read = SPI_NOR_QUAD; + } else if (mode == SPI_NOR_DUAL && info->flags & SPI_NOR_DUAL_READ) { + nor->flash_read = SPI_NOR_DUAL; + } + + /* Default commands */ + switch (nor->flash_read) { + case SPI_NOR_QUAD: + nor->read_opcode = SPINOR_OP_READ_1_1_4; + break; + case SPI_NOR_DUAL: + nor->read_opcode = SPINOR_OP_READ_1_1_2; + break; + case SPI_NOR_FAST: + nor->read_opcode = SPINOR_OP_READ_FAST; + break; + case SPI_NOR_NORMAL: + nor->read_opcode = SPINOR_OP_READ; + break; + default: + dev_err(dev, "No Read opcode defined\n"); + return -EINVAL; + } + + nor->program_opcode = SPINOR_OP_PP; + + if (info->addr_width) + nor->addr_width = info->addr_width; + else if (mtd->size > 0x1000000) { + /* enable 4-byte addressing if the device exceeds 16MiB */ + nor->addr_width = 4; + if (JEDEC_MFR(info->jedec_id) == CFI_MFR_AMD) { + /* Dedicated 4-byte command set */ + switch (nor->flash_read) { + case SPI_NOR_QUAD: + nor->read_opcode = SPINOR_OP_READ4_1_1_4; + break; + case SPI_NOR_DUAL: + nor->read_opcode = SPINOR_OP_READ4_1_1_2; + break; + case SPI_NOR_FAST: + nor->read_opcode = SPINOR_OP_READ4_FAST; + break; + case SPI_NOR_NORMAL: + nor->read_opcode = SPINOR_OP_READ4; + break; + } + nor->program_opcode = SPINOR_OP_PP_4B; + /* No small sector erase for 4-byte command set */ + nor->erase_opcode = SPINOR_OP_SE_4B; + mtd->erasesize = info->sector_size; + } else + set_4byte(nor, info->jedec_id, 1); + } else { + nor->addr_width = 3; + } + + nor->read_dummy = spi_nor_read_dummy_cycles(nor); + + dev_info(dev, "%s (%lld Kbytes)\n", id->name, + (long long)mtd->size >> 10); + + dev_dbg(dev, + "mtd .name = %s, .size = 0x%llx (%lldMiB), " + ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n", + mtd->name, (long long)mtd->size, (long long)(mtd->size >> 20), + mtd->erasesize, mtd->erasesize / 1024, mtd->numeraseregions); + + if (mtd->numeraseregions) + for (i = 0; i < mtd->numeraseregions; i++) + dev_dbg(dev, + "mtd.eraseregions[%d] = { .offset = 0x%llx, " + ".erasesize = 0x%.8x (%uKiB), " + ".numblocks = %d }\n", + i, (long long)mtd->eraseregions[i].offset, + mtd->eraseregions[i].erasesize, + mtd->eraseregions[i].erasesize / 1024, + mtd->eraseregions[i].numblocks); + return 0; +} +EXPORT_SYMBOL_GPL(spi_nor_scan); + +const struct spi_device_id *spi_nor_match_id(char *name) +{ + const struct spi_device_id *id = spi_nor_ids; + + while (id->name[0]) { + if (!strcmp(name, id->name)) + return id; + id++; + } + return NULL; +} +EXPORT_SYMBOL_GPL(spi_nor_match_id); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Huang Shijie <shijie8@gmail.com>"); +MODULE_AUTHOR("Mike Lavender"); +MODULE_DESCRIPTION("framework for SPI NOR"); diff --git a/drivers/mtd/ssfdc.c b/drivers/mtd/ssfdc.c index ab2a52a039c..daf82ba7aba 100644 --- a/drivers/mtd/ssfdc.c +++ b/drivers/mtd/ssfdc.c @@ -290,7 +290,7 @@ static void ssfdcr_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd) int cis_sector; /* Check for small page NAND flash */ - if (mtd->type != MTD_NANDFLASH || mtd->oobsize != OOB_SIZE || + if (!mtd_type_is_nand(mtd) || mtd->oobsize != OOB_SIZE || mtd->size > UINT_MAX) return; diff --git a/drivers/mtd/tests/mtd_nandecctest.c b/drivers/mtd/tests/mtd_nandecctest.c index 70106607c24..e579f9027c4 100644 --- a/drivers/mtd/tests/mtd_nandecctest.c +++ b/drivers/mtd/tests/mtd_nandecctest.c @@ -19,7 +19,7 @@ * or detected. */ -#if defined(CONFIG_MTD_NAND) || defined(CONFIG_MTD_NAND_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND) struct nand_ecc_test { const char *name; diff --git a/drivers/mtd/tests/mtd_test.c b/drivers/mtd/tests/mtd_test.c index c818a63532e..111ee46a742 100644 --- a/drivers/mtd/tests/mtd_test.c +++ b/drivers/mtd/tests/mtd_test.c @@ -1,6 +1,5 @@ #define pr_fmt(fmt) "mtd_test: " fmt -#include <linux/init.h> #include <linux/module.h> #include <linux/sched.h> #include <linux/printk.h> diff --git a/drivers/mtd/tests/nandbiterrs.c b/drivers/mtd/tests/nandbiterrs.c index 3cd3aabbe1c..6f976159611 100644 --- a/drivers/mtd/tests/nandbiterrs.c +++ b/drivers/mtd/tests/nandbiterrs.c @@ -349,7 +349,7 @@ static int __init mtd_nandbiterrs_init(void) goto exit_mtddev; } - if (mtd->type != MTD_NANDFLASH) { + if (!mtd_type_is_nand(mtd)) { pr_info("this test requires NAND flash\n"); err = -ENODEV; goto exit_nand; diff --git a/drivers/mtd/tests/oobtest.c b/drivers/mtd/tests/oobtest.c index ff35c465bfe..f19ab1acde1 100644 --- a/drivers/mtd/tests/oobtest.c +++ b/drivers/mtd/tests/oobtest.c @@ -69,8 +69,8 @@ static int write_eraseblock(int ebnum) int err = 0; loff_t addr = ebnum * mtd->erasesize; + prandom_bytes_state(&rnd_state, writebuf, use_len_max * pgcnt); for (i = 0; i < pgcnt; ++i, addr += mtd->writesize) { - prandom_bytes_state(&rnd_state, writebuf, use_len); ops.mode = MTD_OPS_AUTO_OOB; ops.len = 0; ops.retlen = 0; @@ -78,7 +78,7 @@ static int write_eraseblock(int ebnum) ops.oobretlen = 0; ops.ooboffs = use_offset; ops.datbuf = NULL; - ops.oobbuf = writebuf; + ops.oobbuf = writebuf + (use_len_max * i) + use_offset; err = mtd_write_oob(mtd, addr, &ops); if (err || ops.oobretlen != use_len) { pr_err("error: writeoob failed at %#llx\n", @@ -122,8 +122,8 @@ static int verify_eraseblock(int ebnum) int err = 0; loff_t addr = ebnum * mtd->erasesize; + prandom_bytes_state(&rnd_state, writebuf, use_len_max * pgcnt); for (i = 0; i < pgcnt; ++i, addr += mtd->writesize) { - prandom_bytes_state(&rnd_state, writebuf, use_len); ops.mode = MTD_OPS_AUTO_OOB; ops.len = 0; ops.retlen = 0; @@ -139,7 +139,8 @@ static int verify_eraseblock(int ebnum) errcnt += 1; return err ? err : -1; } - if (memcmp(readbuf, writebuf, use_len)) { + if (memcmp(readbuf, writebuf + (use_len_max * i) + use_offset, + use_len)) { pr_err("error: verify failed at %#llx\n", (long long)addr); errcnt += 1; @@ -166,7 +167,9 @@ static int verify_eraseblock(int ebnum) errcnt += 1; return err ? err : -1; } - if (memcmp(readbuf + use_offset, writebuf, use_len)) { + if (memcmp(readbuf + use_offset, + writebuf + (use_len_max * i) + use_offset, + use_len)) { pr_err("error: verify failed at %#llx\n", (long long)addr); errcnt += 1; @@ -289,7 +292,7 @@ static int __init mtd_oobtest_init(void) return err; } - if (mtd->type != MTD_NANDFLASH) { + if (!mtd_type_is_nand(mtd)) { pr_info("this test requires NAND flash\n"); goto out; } @@ -566,8 +569,8 @@ static int __init mtd_oobtest_init(void) if (bbt[i] || bbt[i + 1]) continue; addr = (i + 1) * mtd->erasesize - mtd->writesize; + prandom_bytes_state(&rnd_state, writebuf, sz * cnt); for (pg = 0; pg < cnt; ++pg) { - prandom_bytes_state(&rnd_state, writebuf, sz); ops.mode = MTD_OPS_AUTO_OOB; ops.len = 0; ops.retlen = 0; @@ -575,7 +578,7 @@ static int __init mtd_oobtest_init(void) ops.oobretlen = 0; ops.ooboffs = 0; ops.datbuf = NULL; - ops.oobbuf = writebuf; + ops.oobbuf = writebuf + pg * sz; err = mtd_write_oob(mtd, addr, &ops); if (err) goto out; diff --git a/drivers/mtd/tests/pagetest.c b/drivers/mtd/tests/pagetest.c index 44b96e999ad..ed2d3f656fd 100644 --- a/drivers/mtd/tests/pagetest.c +++ b/drivers/mtd/tests/pagetest.c @@ -353,7 +353,7 @@ static int __init mtd_pagetest_init(void) return err; } - if (mtd->type != MTD_NANDFLASH) { + if (!mtd_type_is_nand(mtd)) { pr_info("this test requires NAND flash\n"); goto out; } diff --git a/drivers/mtd/tests/subpagetest.c b/drivers/mtd/tests/subpagetest.c index e2c0adf24cf..a876371ad41 100644 --- a/drivers/mtd/tests/subpagetest.c +++ b/drivers/mtd/tests/subpagetest.c @@ -299,7 +299,7 @@ static int __init mtd_subpagetest_init(void) return err; } - if (mtd->type != MTD_NANDFLASH) { + if (!mtd_type_is_nand(mtd)) { pr_info("this test requires NAND flash\n"); goto out; } diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig index 36663af56d8..f0855ce08ed 100644 --- a/drivers/mtd/ubi/Kconfig +++ b/drivers/mtd/ubi/Kconfig @@ -87,4 +87,20 @@ config MTD_UBI_GLUEBI work on top of UBI. Do not enable this unless you use legacy software. +config MTD_UBI_BLOCK + bool "Read-only block devices on top of UBI volumes" + default n + depends on BLOCK + help + This option enables read-only UBI block devices support. UBI block + devices will be layered on top of UBI volumes, which means that the + UBI driver will transparently handle things like bad eraseblocks and + bit-flips. You can put any block-oriented file system on top of UBI + volumes in read-only mode (e.g., ext4), but it is probably most + practical for read-only file systems, like squashfs. + + When selected, this feature will be built in the UBI driver. + + If in doubt, say "N". + endif # MTD_UBI diff --git a/drivers/mtd/ubi/Makefile b/drivers/mtd/ubi/Makefile index b46b0c97858..4e3c3d70d8c 100644 --- a/drivers/mtd/ubi/Makefile +++ b/drivers/mtd/ubi/Makefile @@ -3,5 +3,6 @@ obj-$(CONFIG_MTD_UBI) += ubi.o ubi-y += vtbl.o vmt.o upd.o build.o cdev.o kapi.o eba.o io.o wl.o attach.o ubi-y += misc.o debug.o ubi-$(CONFIG_MTD_UBI_FASTMAP) += fastmap.o +ubi-$(CONFIG_MTD_UBI_BLOCK) += block.o obj-$(CONFIG_MTD_UBI_GLUEBI) += gluebi.o diff --git a/drivers/mtd/ubi/attach.c b/drivers/mtd/ubi/attach.c index c071d410488..6f27d9a1be3 100644 --- a/drivers/mtd/ubi/attach.c +++ b/drivers/mtd/ubi/attach.c @@ -900,10 +900,9 @@ static int scan_peb(struct ubi_device *ubi, struct ubi_attach_info *ai, * number. */ image_seq = be32_to_cpu(ech->image_seq); - if (!ubi->image_seq && image_seq) + if (!ubi->image_seq) ubi->image_seq = image_seq; - if (ubi->image_seq && image_seq && - ubi->image_seq != image_seq) { + if (image_seq && ubi->image_seq != image_seq) { ubi_err("bad image sequence number %d in PEB %d, expected %d", image_seq, pnum, ubi->image_seq); ubi_dump_ec_hdr(ech); @@ -1417,9 +1416,11 @@ int ubi_attach(struct ubi_device *ubi, int force_scan) ai = alloc_ai("ubi_aeb_slab_cache2"); if (!ai) return -ENOMEM; - } - err = scan_all(ubi, ai, UBI_FM_MAX_START); + err = scan_all(ubi, ai, 0); + } else { + err = scan_all(ubi, ai, UBI_FM_MAX_START); + } } } #else @@ -1452,8 +1453,10 @@ int ubi_attach(struct ubi_device *ubi, int force_scan) struct ubi_attach_info *scan_ai; scan_ai = alloc_ai("ubi_ckh_aeb_slab_cache"); - if (!scan_ai) + if (!scan_ai) { + err = -ENOMEM; goto out_wl; + } err = scan_all(ubi, scan_ai, 0); if (err) { diff --git a/drivers/mtd/ubi/block.c b/drivers/mtd/ubi/block.c new file mode 100644 index 00000000000..8457df7ec5a --- /dev/null +++ b/drivers/mtd/ubi/block.c @@ -0,0 +1,649 @@ +/* + * Copyright (c) 2014 Ezequiel Garcia + * Copyright (c) 2011 Free Electrons + * + * Driver parameter handling strongly based on drivers/mtd/ubi/build.c + * Copyright (c) International Business Machines Corp., 2006 + * Copyright (c) Nokia Corporation, 2007 + * Authors: Artem Bityutskiy, Frank Haverkamp + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + */ + +/* + * Read-only block devices on top of UBI volumes + * + * A simple implementation to allow a block device to be layered on top of a + * UBI volume. The implementation is provided by creating a static 1-to-1 + * mapping between the block device and the UBI volume. + * + * The addressed byte is obtained from the addressed block sector, which is + * mapped linearly into the corresponding LEB: + * + * LEB number = addressed byte / LEB size + * + * This feature is compiled in the UBI core, and adds a 'block' parameter + * to allow early creation of block devices on top of UBI volumes. Runtime + * block creation/removal for UBI volumes is provided through two UBI ioctls: + * UBI_IOCVOLCRBLK and UBI_IOCVOLRMBLK. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/mutex.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> +#include <linux/mtd/ubi.h> +#include <linux/workqueue.h> +#include <linux/blkdev.h> +#include <linux/hdreg.h> +#include <asm/div64.h> + +#include "ubi-media.h" +#include "ubi.h" + +/* Maximum number of supported devices */ +#define UBIBLOCK_MAX_DEVICES 32 + +/* Maximum length of the 'block=' parameter */ +#define UBIBLOCK_PARAM_LEN 63 + +/* Maximum number of comma-separated items in the 'block=' parameter */ +#define UBIBLOCK_PARAM_COUNT 2 + +struct ubiblock_param { + int ubi_num; + int vol_id; + char name[UBIBLOCK_PARAM_LEN+1]; +}; + +/* Numbers of elements set in the @ubiblock_param array */ +static int ubiblock_devs __initdata; + +/* MTD devices specification parameters */ +static struct ubiblock_param ubiblock_param[UBIBLOCK_MAX_DEVICES] __initdata; + +struct ubiblock { + struct ubi_volume_desc *desc; + int ubi_num; + int vol_id; + int refcnt; + int leb_size; + + struct gendisk *gd; + struct request_queue *rq; + + struct workqueue_struct *wq; + struct work_struct work; + + struct mutex dev_mutex; + spinlock_t queue_lock; + struct list_head list; +}; + +/* Linked list of all ubiblock instances */ +static LIST_HEAD(ubiblock_devices); +static DEFINE_MUTEX(devices_mutex); +static int ubiblock_major; + +static int __init ubiblock_set_param(const char *val, + const struct kernel_param *kp) +{ + int i, ret; + size_t len; + struct ubiblock_param *param; + char buf[UBIBLOCK_PARAM_LEN]; + char *pbuf = &buf[0]; + char *tokens[UBIBLOCK_PARAM_COUNT]; + + if (!val) + return -EINVAL; + + len = strnlen(val, UBIBLOCK_PARAM_LEN); + if (len == 0) { + ubi_warn("block: empty 'block=' parameter - ignored\n"); + return 0; + } + + if (len == UBIBLOCK_PARAM_LEN) { + ubi_err("block: parameter \"%s\" is too long, max. is %d\n", + val, UBIBLOCK_PARAM_LEN); + return -EINVAL; + } + + strcpy(buf, val); + + /* Get rid of the final newline */ + if (buf[len - 1] == '\n') + buf[len - 1] = '\0'; + + for (i = 0; i < UBIBLOCK_PARAM_COUNT; i++) + tokens[i] = strsep(&pbuf, ","); + + param = &ubiblock_param[ubiblock_devs]; + if (tokens[1]) { + /* Two parameters: can be 'ubi, vol_id' or 'ubi, vol_name' */ + ret = kstrtoint(tokens[0], 10, ¶m->ubi_num); + if (ret < 0) + return -EINVAL; + + /* Second param can be a number or a name */ + ret = kstrtoint(tokens[1], 10, ¶m->vol_id); + if (ret < 0) { + param->vol_id = -1; + strcpy(param->name, tokens[1]); + } + + } else { + /* One parameter: must be device path */ + strcpy(param->name, tokens[0]); + param->ubi_num = -1; + param->vol_id = -1; + } + + ubiblock_devs++; + + return 0; +} + +static struct kernel_param_ops ubiblock_param_ops = { + .set = ubiblock_set_param, +}; +module_param_cb(block, &ubiblock_param_ops, NULL, 0); +MODULE_PARM_DESC(block, "Attach block devices to UBI volumes. Parameter format: block=<path|dev,num|dev,name>.\n" + "Multiple \"block\" parameters may be specified.\n" + "UBI volumes may be specified by their number, name, or path to the device node.\n" + "Examples\n" + "Using the UBI volume path:\n" + "ubi.block=/dev/ubi0_0\n" + "Using the UBI device, and the volume name:\n" + "ubi.block=0,rootfs\n" + "Using both UBI device number and UBI volume number:\n" + "ubi.block=0,0\n"); + +static struct ubiblock *find_dev_nolock(int ubi_num, int vol_id) +{ + struct ubiblock *dev; + + list_for_each_entry(dev, &ubiblock_devices, list) + if (dev->ubi_num == ubi_num && dev->vol_id == vol_id) + return dev; + return NULL; +} + +static int ubiblock_read_to_buf(struct ubiblock *dev, char *buffer, + int leb, int offset, int len) +{ + int ret; + + ret = ubi_read(dev->desc, leb, buffer, offset, len); + if (ret) { + ubi_err("%s ubi_read error %d", + dev->gd->disk_name, ret); + return ret; + } + return 0; +} + +static int ubiblock_read(struct ubiblock *dev, char *buffer, + sector_t sec, int len) +{ + int ret, leb, offset; + int bytes_left = len; + int to_read = len; + u64 pos = sec << 9; + + /* Get LEB:offset address to read from */ + offset = do_div(pos, dev->leb_size); + leb = pos; + + while (bytes_left) { + /* + * We can only read one LEB at a time. Therefore if the read + * length is larger than one LEB size, we split the operation. + */ + if (offset + to_read > dev->leb_size) + to_read = dev->leb_size - offset; + + ret = ubiblock_read_to_buf(dev, buffer, leb, offset, to_read); + if (ret) + return ret; + + buffer += to_read; + bytes_left -= to_read; + to_read = bytes_left; + leb += 1; + offset = 0; + } + return 0; +} + +static int do_ubiblock_request(struct ubiblock *dev, struct request *req) +{ + int len, ret; + sector_t sec; + + if (req->cmd_type != REQ_TYPE_FS) + return -EIO; + + if (blk_rq_pos(req) + blk_rq_cur_sectors(req) > + get_capacity(req->rq_disk)) + return -EIO; + + if (rq_data_dir(req) != READ) + return -ENOSYS; /* Write not implemented */ + + sec = blk_rq_pos(req); + len = blk_rq_cur_bytes(req); + + /* + * Let's prevent the device from being removed while we're doing I/O + * work. Notice that this means we serialize all the I/O operations, + * but it's probably of no impact given the NAND core serializes + * flash access anyway. + */ + mutex_lock(&dev->dev_mutex); + ret = ubiblock_read(dev, bio_data(req->bio), sec, len); + mutex_unlock(&dev->dev_mutex); + + return ret; +} + +static void ubiblock_do_work(struct work_struct *work) +{ + struct ubiblock *dev = + container_of(work, struct ubiblock, work); + struct request_queue *rq = dev->rq; + struct request *req; + int res; + + spin_lock_irq(rq->queue_lock); + + req = blk_fetch_request(rq); + while (req) { + + spin_unlock_irq(rq->queue_lock); + res = do_ubiblock_request(dev, req); + spin_lock_irq(rq->queue_lock); + + /* + * If we're done with this request, + * we need to fetch a new one + */ + if (!__blk_end_request_cur(req, res)) + req = blk_fetch_request(rq); + } + + spin_unlock_irq(rq->queue_lock); +} + +static void ubiblock_request(struct request_queue *rq) +{ + struct ubiblock *dev; + struct request *req; + + dev = rq->queuedata; + + if (!dev) + while ((req = blk_fetch_request(rq)) != NULL) + __blk_end_request_all(req, -ENODEV); + else + queue_work(dev->wq, &dev->work); +} + +static int ubiblock_open(struct block_device *bdev, fmode_t mode) +{ + struct ubiblock *dev = bdev->bd_disk->private_data; + int ret; + + mutex_lock(&dev->dev_mutex); + if (dev->refcnt > 0) { + /* + * The volume is already open, just increase the reference + * counter. + */ + goto out_done; + } + + /* + * We want users to be aware they should only mount us as read-only. + * It's just a paranoid check, as write requests will get rejected + * in any case. + */ + if (mode & FMODE_WRITE) { + ret = -EPERM; + goto out_unlock; + } + + dev->desc = ubi_open_volume(dev->ubi_num, dev->vol_id, UBI_READONLY); + if (IS_ERR(dev->desc)) { + ubi_err("%s failed to open ubi volume %d_%d", + dev->gd->disk_name, dev->ubi_num, dev->vol_id); + ret = PTR_ERR(dev->desc); + dev->desc = NULL; + goto out_unlock; + } + +out_done: + dev->refcnt++; + mutex_unlock(&dev->dev_mutex); + return 0; + +out_unlock: + mutex_unlock(&dev->dev_mutex); + return ret; +} + +static void ubiblock_release(struct gendisk *gd, fmode_t mode) +{ + struct ubiblock *dev = gd->private_data; + + mutex_lock(&dev->dev_mutex); + dev->refcnt--; + if (dev->refcnt == 0) { + ubi_close_volume(dev->desc); + dev->desc = NULL; + } + mutex_unlock(&dev->dev_mutex); +} + +static int ubiblock_getgeo(struct block_device *bdev, struct hd_geometry *geo) +{ + /* Some tools might require this information */ + geo->heads = 1; + geo->cylinders = 1; + geo->sectors = get_capacity(bdev->bd_disk); + geo->start = 0; + return 0; +} + +static const struct block_device_operations ubiblock_ops = { + .owner = THIS_MODULE, + .open = ubiblock_open, + .release = ubiblock_release, + .getgeo = ubiblock_getgeo, +}; + +int ubiblock_create(struct ubi_volume_info *vi) +{ + struct ubiblock *dev; + struct gendisk *gd; + int disk_capacity; + int ret; + + /* Check that the volume isn't already handled */ + mutex_lock(&devices_mutex); + if (find_dev_nolock(vi->ubi_num, vi->vol_id)) { + mutex_unlock(&devices_mutex); + return -EEXIST; + } + mutex_unlock(&devices_mutex); + + dev = kzalloc(sizeof(struct ubiblock), GFP_KERNEL); + if (!dev) + return -ENOMEM; + + mutex_init(&dev->dev_mutex); + + dev->ubi_num = vi->ubi_num; + dev->vol_id = vi->vol_id; + dev->leb_size = vi->usable_leb_size; + + /* Initialize the gendisk of this ubiblock device */ + gd = alloc_disk(1); + if (!gd) { + ubi_err("block: alloc_disk failed"); + ret = -ENODEV; + goto out_free_dev; + } + + gd->fops = &ubiblock_ops; + gd->major = ubiblock_major; + gd->first_minor = dev->ubi_num * UBI_MAX_VOLUMES + dev->vol_id; + gd->private_data = dev; + sprintf(gd->disk_name, "ubiblock%d_%d", dev->ubi_num, dev->vol_id); + disk_capacity = (vi->size * vi->usable_leb_size) >> 9; + set_capacity(gd, disk_capacity); + dev->gd = gd; + + spin_lock_init(&dev->queue_lock); + dev->rq = blk_init_queue(ubiblock_request, &dev->queue_lock); + if (!dev->rq) { + ubi_err("block: blk_init_queue failed"); + ret = -ENODEV; + goto out_put_disk; + } + + dev->rq->queuedata = dev; + dev->gd->queue = dev->rq; + + /* + * Create one workqueue per volume (per registered block device). + * Rembember workqueues are cheap, they're not threads. + */ + dev->wq = alloc_workqueue("%s", 0, 0, gd->disk_name); + if (!dev->wq) { + ret = -ENOMEM; + goto out_free_queue; + } + INIT_WORK(&dev->work, ubiblock_do_work); + + mutex_lock(&devices_mutex); + list_add_tail(&dev->list, &ubiblock_devices); + mutex_unlock(&devices_mutex); + + /* Must be the last step: anyone can call file ops from now on */ + add_disk(dev->gd); + ubi_msg("%s created from ubi%d:%d(%s)", + dev->gd->disk_name, dev->ubi_num, dev->vol_id, vi->name); + return 0; + +out_free_queue: + blk_cleanup_queue(dev->rq); +out_put_disk: + put_disk(dev->gd); +out_free_dev: + kfree(dev); + + return ret; +} + +static void ubiblock_cleanup(struct ubiblock *dev) +{ + del_gendisk(dev->gd); + blk_cleanup_queue(dev->rq); + ubi_msg("%s released", dev->gd->disk_name); + put_disk(dev->gd); +} + +int ubiblock_remove(struct ubi_volume_info *vi) +{ + struct ubiblock *dev; + + mutex_lock(&devices_mutex); + dev = find_dev_nolock(vi->ubi_num, vi->vol_id); + if (!dev) { + mutex_unlock(&devices_mutex); + return -ENODEV; + } + + /* Found a device, let's lock it so we can check if it's busy */ + mutex_lock(&dev->dev_mutex); + if (dev->refcnt > 0) { + mutex_unlock(&dev->dev_mutex); + mutex_unlock(&devices_mutex); + return -EBUSY; + } + + /* Remove from device list */ + list_del(&dev->list); + mutex_unlock(&devices_mutex); + + /* Flush pending work and stop this workqueue */ + destroy_workqueue(dev->wq); + + ubiblock_cleanup(dev); + mutex_unlock(&dev->dev_mutex); + kfree(dev); + return 0; +} + +static void ubiblock_resize(struct ubi_volume_info *vi) +{ + struct ubiblock *dev; + int disk_capacity; + + /* + * Need to lock the device list until we stop using the device, + * otherwise the device struct might get released in + * 'ubiblock_remove()'. + */ + mutex_lock(&devices_mutex); + dev = find_dev_nolock(vi->ubi_num, vi->vol_id); + if (!dev) { + mutex_unlock(&devices_mutex); + return; + } + + mutex_lock(&dev->dev_mutex); + disk_capacity = (vi->size * vi->usable_leb_size) >> 9; + set_capacity(dev->gd, disk_capacity); + ubi_msg("%s resized to %d LEBs", dev->gd->disk_name, vi->size); + mutex_unlock(&dev->dev_mutex); + mutex_unlock(&devices_mutex); +} + +static int ubiblock_notify(struct notifier_block *nb, + unsigned long notification_type, void *ns_ptr) +{ + struct ubi_notification *nt = ns_ptr; + + switch (notification_type) { + case UBI_VOLUME_ADDED: + /* + * We want to enforce explicit block device creation for + * volumes, so when a volume is added we do nothing. + */ + break; + case UBI_VOLUME_REMOVED: + ubiblock_remove(&nt->vi); + break; + case UBI_VOLUME_RESIZED: + ubiblock_resize(&nt->vi); + break; + default: + break; + } + return NOTIFY_OK; +} + +static struct notifier_block ubiblock_notifier = { + .notifier_call = ubiblock_notify, +}; + +static struct ubi_volume_desc * __init +open_volume_desc(const char *name, int ubi_num, int vol_id) +{ + if (ubi_num == -1) + /* No ubi num, name must be a vol device path */ + return ubi_open_volume_path(name, UBI_READONLY); + else if (vol_id == -1) + /* No vol_id, must be vol_name */ + return ubi_open_volume_nm(ubi_num, name, UBI_READONLY); + else + return ubi_open_volume(ubi_num, vol_id, UBI_READONLY); +} + +static int __init ubiblock_create_from_param(void) +{ + int i, ret; + struct ubiblock_param *p; + struct ubi_volume_desc *desc; + struct ubi_volume_info vi; + + for (i = 0; i < ubiblock_devs; i++) { + p = &ubiblock_param[i]; + + desc = open_volume_desc(p->name, p->ubi_num, p->vol_id); + if (IS_ERR(desc)) { + ubi_err("block: can't open volume, err=%ld\n", + PTR_ERR(desc)); + ret = PTR_ERR(desc); + break; + } + + ubi_get_volume_info(desc, &vi); + ubi_close_volume(desc); + + ret = ubiblock_create(&vi); + if (ret) { + ubi_err("block: can't add '%s' volume, err=%d\n", + vi.name, ret); + break; + } + } + return ret; +} + +static void ubiblock_remove_all(void) +{ + struct ubiblock *next; + struct ubiblock *dev; + + list_for_each_entry_safe(dev, next, &ubiblock_devices, list) { + /* Flush pending work and stop workqueue */ + destroy_workqueue(dev->wq); + /* The module is being forcefully removed */ + WARN_ON(dev->desc); + /* Remove from device list */ + list_del(&dev->list); + ubiblock_cleanup(dev); + kfree(dev); + } +} + +int __init ubiblock_init(void) +{ + int ret; + + ubiblock_major = register_blkdev(0, "ubiblock"); + if (ubiblock_major < 0) + return ubiblock_major; + + /* Attach block devices from 'block=' module param */ + ret = ubiblock_create_from_param(); + if (ret) + goto err_remove; + + /* + * Block devices are only created upon user requests, so we ignore + * existing volumes. + */ + ret = ubi_register_volume_notifier(&ubiblock_notifier, 1); + if (ret) + goto err_unreg; + return 0; + +err_unreg: + unregister_blkdev(ubiblock_major, "ubiblock"); +err_remove: + ubiblock_remove_all(); + return ret; +} + +void __exit ubiblock_exit(void) +{ + ubi_unregister_volume_notifier(&ubiblock_notifier); + ubiblock_remove_all(); + unregister_blkdev(ubiblock_major, "ubiblock"); +} diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 315dcc6ec1f..6e30a3c280d 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -41,6 +41,7 @@ #include <linux/kthread.h> #include <linux/kernel.h> #include <linux/slab.h> +#include <linux/major.h> #include "ubi.h" /* Maximum length of the 'mtd=' parameter */ @@ -1244,8 +1245,10 @@ static int __init ubi_init(void) ubi_wl_entry_slab = kmem_cache_create("ubi_wl_entry_slab", sizeof(struct ubi_wl_entry), 0, 0, NULL); - if (!ubi_wl_entry_slab) + if (!ubi_wl_entry_slab) { + err = -ENOMEM; goto out_dev_unreg; + } err = ubi_debugfs_init(); if (err) @@ -1295,6 +1298,15 @@ static int __init ubi_init(void) } } + err = ubiblock_init(); + if (err) { + ubi_err("block: cannot initialize, error %d", err); + + /* See comment above re-ubi_is_module(). */ + if (ubi_is_module()) + goto out_detach; + } + return 0; out_detach: @@ -1323,6 +1335,8 @@ static void __exit ubi_exit(void) { int i; + ubiblock_exit(); + for (i = 0; i < UBI_MAX_DEVICES; i++) if (ubi_devices[i]) { mutex_lock(&ubi_devices_mutex); diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index 8ca49f2043e..7646220ca6e 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -561,6 +561,26 @@ static long vol_cdev_ioctl(struct file *file, unsigned int cmd, break; } + /* Create a R/O block device on top of the UBI volume */ + case UBI_IOCVOLCRBLK: + { + struct ubi_volume_info vi; + + ubi_get_volume_info(desc, &vi); + err = ubiblock_create(&vi); + break; + } + + /* Remove the R/O block device */ + case UBI_IOCVOLRMBLK: + { + struct ubi_volume_info vi; + + ubi_get_volume_info(desc, &vi); + err = ubiblock_remove(&vi); + break; + } + default: err = -ENOTTY; break; @@ -711,7 +731,7 @@ static int rename_volumes(struct ubi_device *ubi, goto out_free; } - re->desc = ubi_open_volume(ubi->ubi_num, vol_id, UBI_EXCLUSIVE); + re->desc = ubi_open_volume(ubi->ubi_num, vol_id, UBI_READWRITE); if (IS_ERR(re->desc)) { err = PTR_ERR(re->desc); ubi_err("cannot open volume %d, error %d", vol_id, err); diff --git a/drivers/mtd/ubi/fastmap.c b/drivers/mtd/ubi/fastmap.c index f5aa4b02cfa..0431b46d9fd 100644 --- a/drivers/mtd/ubi/fastmap.c +++ b/drivers/mtd/ubi/fastmap.c @@ -127,7 +127,7 @@ static struct ubi_ainf_volume *add_vol(struct ubi_attach_info *ai, int vol_id, if (vol_id > av->vol_id) p = &(*p)->rb_left; - else if (vol_id > av->vol_id) + else p = &(*p)->rb_right; } @@ -407,6 +407,7 @@ static int scan_pool(struct ubi_device *ubi, struct ubi_attach_info *ai, */ for (i = 0; i < pool_size; i++) { int scrub = 0; + int image_seq; pnum = be32_to_cpu(pebs[i]); @@ -422,13 +423,19 @@ static int scan_pool(struct ubi_device *ubi, struct ubi_attach_info *ai, pnum, err); ret = err > 0 ? UBI_BAD_FASTMAP : err; goto out; - } else if (ret == UBI_IO_BITFLIPS) + } else if (err == UBI_IO_BITFLIPS) scrub = 1; - if (be32_to_cpu(ech->image_seq) != ubi->image_seq) { + /* + * Older UBI implementations have image_seq set to zero, so + * we shouldn't fail if image_seq == 0. + */ + image_seq = be32_to_cpu(ech->image_seq); + + if (image_seq && (image_seq != ubi->image_seq)) { ubi_err("bad image seq: 0x%x, expected: 0x%x", be32_to_cpu(ech->image_seq), ubi->image_seq); - err = UBI_BAD_FASTMAP; + ret = UBI_BAD_FASTMAP; goto out; } @@ -456,8 +463,8 @@ static int scan_pool(struct ubi_device *ubi, struct ubi_attach_info *ai, } } if (found_orphan) { - kmem_cache_free(ai->aeb_slab_cache, tmp_aeb); list_del(&tmp_aeb->u.list); + kmem_cache_free(ai->aeb_slab_cache, tmp_aeb); } new_aeb = kmem_cache_alloc(ai->aeb_slab_cache, @@ -819,6 +826,10 @@ static int ubi_attach_fastmap(struct ubi_device *ubi, list_for_each_entry_safe(tmp_aeb, _tmp_aeb, &free, u.list) list_move_tail(&tmp_aeb->u.list, &ai->free); + ubi_assert(list_empty(&used)); + ubi_assert(list_empty(&eba_orphans)); + ubi_assert(list_empty(&free)); + /* * If fastmap is leaking PEBs (must not happen), raise a * fat warning and fall back to scanning mode. @@ -834,6 +845,19 @@ static int ubi_attach_fastmap(struct ubi_device *ubi, fail_bad: ret = UBI_BAD_FASTMAP; fail: + list_for_each_entry_safe(tmp_aeb, _tmp_aeb, &used, u.list) { + list_del(&tmp_aeb->u.list); + kmem_cache_free(ai->aeb_slab_cache, tmp_aeb); + } + list_for_each_entry_safe(tmp_aeb, _tmp_aeb, &eba_orphans, u.list) { + list_del(&tmp_aeb->u.list); + kmem_cache_free(ai->aeb_slab_cache, tmp_aeb); + } + list_for_each_entry_safe(tmp_aeb, _tmp_aeb, &free, u.list) { + list_del(&tmp_aeb->u.list); + kmem_cache_free(ai->aeb_slab_cache, tmp_aeb); + } + return ret; } @@ -923,6 +947,8 @@ int ubi_scan_fastmap(struct ubi_device *ubi, struct ubi_attach_info *ai, } for (i = 0; i < used_blocks; i++) { + int image_seq; + pnum = be32_to_cpu(fmsb->block_loc[i]); if (ubi_io_is_bad(ubi, pnum)) { @@ -940,10 +966,17 @@ int ubi_scan_fastmap(struct ubi_device *ubi, struct ubi_attach_info *ai, } else if (ret == UBI_IO_BITFLIPS) fm->to_be_tortured[i] = 1; + image_seq = be32_to_cpu(ech->image_seq); if (!ubi->image_seq) - ubi->image_seq = be32_to_cpu(ech->image_seq); + ubi->image_seq = image_seq; - if (be32_to_cpu(ech->image_seq) != ubi->image_seq) { + /* + * Older UBI implementations have image_seq set to zero, so + * we shouldn't fail if image_seq == 0. + */ + if (image_seq && (image_seq != ubi->image_seq)) { + ubi_err("wrong image seq:%d instead of %d", + be32_to_cpu(ech->image_seq), ubi->image_seq); ret = UBI_BAD_FASTMAP; goto free_hdr; } diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c index bf79def4012..d36134925d3 100644 --- a/drivers/mtd/ubi/io.c +++ b/drivers/mtd/ubi/io.c @@ -495,10 +495,12 @@ out: */ static int nor_erase_prepare(struct ubi_device *ubi, int pnum) { - int err, err1; + int err; size_t written; loff_t addr; uint32_t data = 0; + struct ubi_ec_hdr ec_hdr; + /* * Note, we cannot generally define VID header buffers on stack, * because of the way we deal with these buffers (see the header @@ -509,50 +511,38 @@ static int nor_erase_prepare(struct ubi_device *ubi, int pnum) struct ubi_vid_hdr vid_hdr; /* + * If VID or EC is valid, we have to corrupt them before erasing. * It is important to first invalidate the EC header, and then the VID * header. Otherwise a power cut may lead to valid EC header and * invalid VID header, in which case UBI will treat this PEB as * corrupted and will try to preserve it, and print scary warnings. */ addr = (loff_t)pnum * ubi->peb_size; - err = mtd_write(ubi->mtd, addr, 4, &written, (void *)&data); - if (!err) { - addr += ubi->vid_hdr_aloffset; + err = ubi_io_read_ec_hdr(ubi, pnum, &ec_hdr, 0); + if (err != UBI_IO_BAD_HDR_EBADMSG && err != UBI_IO_BAD_HDR && + err != UBI_IO_FF){ err = mtd_write(ubi->mtd, addr, 4, &written, (void *)&data); - if (!err) - return 0; + if(err) + goto error; } - /* - * We failed to write to the media. This was observed with Spansion - * S29GL512N NOR flash. Most probably the previously eraseblock erasure - * was interrupted at a very inappropriate moment, so it became - * unwritable. In this case we probably anyway have garbage in this - * PEB. - */ - err1 = ubi_io_read_vid_hdr(ubi, pnum, &vid_hdr, 0); - if (err1 == UBI_IO_BAD_HDR_EBADMSG || err1 == UBI_IO_BAD_HDR || - err1 == UBI_IO_FF) { - struct ubi_ec_hdr ec_hdr; - - err1 = ubi_io_read_ec_hdr(ubi, pnum, &ec_hdr, 0); - if (err1 == UBI_IO_BAD_HDR_EBADMSG || err1 == UBI_IO_BAD_HDR || - err1 == UBI_IO_FF) - /* - * Both VID and EC headers are corrupted, so we can - * safely erase this PEB and not afraid that it will be - * treated as a valid PEB in case of an unclean reboot. - */ - return 0; + err = ubi_io_read_vid_hdr(ubi, pnum, &vid_hdr, 0); + if (err != UBI_IO_BAD_HDR_EBADMSG && err != UBI_IO_BAD_HDR && + err != UBI_IO_FF){ + addr += ubi->vid_hdr_aloffset; + err = mtd_write(ubi->mtd, addr, 4, &written, (void *)&data); + if (err) + goto error; } + return 0; +error: /* - * The PEB contains a valid VID header, but we cannot invalidate it. - * Supposedly the flash media or the driver is screwed up, so return an - * error. + * The PEB contains a valid VID or EC header, but we cannot invalidate + * it. Supposedly the flash media or the driver is screwed up, so + * return an error. */ - ubi_err("cannot invalidate PEB %d, write returned %d read returned %d", - pnum, err, err1); + ubi_err("cannot invalidate PEB %d, write returned %d", pnum, err); ubi_dump_flash(ubi, pnum, 0, ubi->peb_size); return -EIO; } diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h index 8ea6297a208..7bf416329c1 100644 --- a/drivers/mtd/ubi/ubi.h +++ b/drivers/mtd/ubi/ubi.h @@ -22,7 +22,6 @@ #ifndef __UBI_UBI_H__ #define __UBI_UBI_H__ -#include <linux/init.h> #include <linux/types.h> #include <linux/list.h> #include <linux/rbtree.h> @@ -864,6 +863,26 @@ int ubi_update_fastmap(struct ubi_device *ubi); int ubi_scan_fastmap(struct ubi_device *ubi, struct ubi_attach_info *ai, int fm_anchor); +/* block.c */ +#ifdef CONFIG_MTD_UBI_BLOCK +int ubiblock_init(void); +void ubiblock_exit(void); +int ubiblock_create(struct ubi_volume_info *vi); +int ubiblock_remove(struct ubi_volume_info *vi); +#else +static inline int ubiblock_init(void) { return 0; } +static inline void ubiblock_exit(void) {} +static inline int ubiblock_create(struct ubi_volume_info *vi) +{ + return -ENOSYS; +} +static inline int ubiblock_remove(struct ubi_volume_info *vi) +{ + return -ENOSYS; +} +#endif + + /* * ubi_rb_for_each_entry - walk an RB-tree. * @rb: a pointer to type 'struct rb_node' to use as a loop counter diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index c95bfb183c6..0f3425dac91 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -599,10 +599,6 @@ static void refill_wl_user_pool(struct ubi_device *ubi) return_unused_pool_pebs(ubi, pool); for (pool->size = 0; pool->size < pool->max_size; pool->size++) { - if (!ubi->free.rb_node || - (ubi->free_count - ubi->beb_rsvd_pebs < 1)) - break; - pool->pebs[pool->size] = __wl_get_peb(ubi); if (pool->pebs[pool->size] < 0) break; @@ -675,6 +671,8 @@ static struct ubi_wl_entry *get_peb_for_wl(struct ubi_device *ubi) e = find_wl_entry(ubi, &ubi->free, WL_FREE_MAX_DIFF); self_check_in_wl_tree(ubi, e, &ubi->free); + ubi->free_count--; + ubi_assert(ubi->free_count >= 0); rb_erase(&e->u.rb, &ubi->free); return e; @@ -688,6 +686,9 @@ int ubi_wl_get_peb(struct ubi_device *ubi) peb = __wl_get_peb(ubi); spin_unlock(&ubi->wl_lock); + if (peb < 0) + return peb; + err = ubi_self_check_all_ff(ubi, peb, ubi->vid_hdr_aloffset, ubi->peb_size - ubi->vid_hdr_aloffset); if (err) { @@ -1072,6 +1073,7 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk, /* Give the unused PEB back */ wl_tree_add(e2, &ubi->free); + ubi->free_count++; goto out_cancel; } self_check_in_wl_tree(ubi, e1, &ubi->used); |