diff options
Diffstat (limited to 'drivers/mtd/nand/toto.c')
| -rw-r--r-- | drivers/mtd/nand/toto.c | 205 |
1 files changed, 0 insertions, 205 deletions
diff --git a/drivers/mtd/nand/toto.c b/drivers/mtd/nand/toto.c deleted file mode 100644 index 52c808fb5fa..00000000000 --- a/drivers/mtd/nand/toto.c +++ /dev/null @@ -1,205 +0,0 @@ -/* - * drivers/mtd/nand/toto.c - * - * Copyright (c) 2003 Texas Instruments - * - * Derived from drivers/mtd/autcpu12.c - * - * Copyright (c) 2002 Thomas Gleixner <tgxl@linutronix.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Overview: - * This is a device driver for the NAND flash device found on the - * TI fido board. It supports 32MiB and 64MiB cards - * - * $Id: toto.c,v 1.4 2004/10/05 13:50:20 gleixner Exp $ - */ - -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> -#include <asm/sizes.h> -#include <asm/arch/toto.h> -#include <asm/arch-omap1510/hardware.h> -#include <asm/arch/gpio.h> - -/* - * MTD structure for TOTO board - */ -static struct mtd_info *toto_mtd = NULL; - -static unsigned long toto_io_base = OMAP_FLASH_1_BASE; - -#define CONFIG_NAND_WORKAROUND 1 - -#define NAND_NCE 0x4000 -#define NAND_CLE 0x1000 -#define NAND_ALE 0x0002 -#define NAND_MASK (NAND_CLE | NAND_ALE | NAND_NCE) - -#define T_NAND_CTL_CLRALE(iob) gpiosetout(NAND_ALE, 0) -#define T_NAND_CTL_SETALE(iob) gpiosetout(NAND_ALE, NAND_ALE) -#ifdef CONFIG_NAND_WORKAROUND /* "some" dev boards busted, blue wired to rts2 :( */ -#define T_NAND_CTL_CLRCLE(iob) gpiosetout(NAND_CLE, 0); rts2setout(2, 2) -#define T_NAND_CTL_SETCLE(iob) gpiosetout(NAND_CLE, NAND_CLE); rts2setout(2, 0) -#else -#define T_NAND_CTL_CLRCLE(iob) gpiosetout(NAND_CLE, 0) -#define T_NAND_CTL_SETCLE(iob) gpiosetout(NAND_CLE, NAND_CLE) -#endif -#define T_NAND_CTL_SETNCE(iob) gpiosetout(NAND_NCE, 0) -#define T_NAND_CTL_CLRNCE(iob) gpiosetout(NAND_NCE, NAND_NCE) - -/* - * Define partitions for flash devices - */ - -static struct mtd_partition partition_info64M[] = { - { .name = "toto kernel partition 1", - .offset = 0, - .size = 2 * SZ_1M }, - { .name = "toto file sys partition 2", - .offset = 2 * SZ_1M, - .size = 14 * SZ_1M }, - { .name = "toto user partition 3", - .offset = 16 * SZ_1M, - .size = 16 * SZ_1M }, - { .name = "toto devboard extra partition 4", - .offset = 32 * SZ_1M, - .size = 32 * SZ_1M }, -}; - -static struct mtd_partition partition_info32M[] = { - { .name = "toto kernel partition 1", - .offset = 0, - .size = 2 * SZ_1M }, - { .name = "toto file sys partition 2", - .offset = 2 * SZ_1M, - .size = 14 * SZ_1M }, - { .name = "toto user partition 3", - .offset = 16 * SZ_1M, - .size = 16 * SZ_1M }, -}; - -#define NUM_PARTITIONS32M 3 -#define NUM_PARTITIONS64M 4 -/* - * hardware specific access to control-lines -*/ - -static void toto_hwcontrol(struct mtd_info *mtd, int cmd) -{ - - udelay(1); /* hopefully enough time for tc make proceding write to clear */ - switch(cmd){ - - case NAND_CTL_SETCLE: T_NAND_CTL_SETCLE(cmd); break; - case NAND_CTL_CLRCLE: T_NAND_CTL_CLRCLE(cmd); break; - - case NAND_CTL_SETALE: T_NAND_CTL_SETALE(cmd); break; - case NAND_CTL_CLRALE: T_NAND_CTL_CLRALE(cmd); break; - - case NAND_CTL_SETNCE: T_NAND_CTL_SETNCE(cmd); break; - case NAND_CTL_CLRNCE: T_NAND_CTL_CLRNCE(cmd); break; - } - udelay(1); /* allow time to ensure gpio state to over take memory write */ -} - -/* - * Main initialization routine - */ -int __init toto_init (void) -{ - struct nand_chip *this; - int err = 0; - - /* Allocate memory for MTD device structure and private data */ - toto_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct nand_chip), - GFP_KERNEL); - if (!toto_mtd) { - printk (KERN_WARNING "Unable to allocate toto NAND MTD device structure.\n"); - err = -ENOMEM; - goto out; - } - - /* Get pointer to private data */ - this = (struct nand_chip *) (&toto_mtd[1]); - - /* Initialize structures */ - memset((char *) toto_mtd, 0, sizeof(struct mtd_info)); - memset((char *) this, 0, sizeof(struct nand_chip)); - - /* Link the private data with the MTD structure */ - toto_mtd->priv = this; - - /* Set address of NAND IO lines */ - this->IO_ADDR_R = toto_io_base; - this->IO_ADDR_W = toto_io_base; - this->hwcontrol = toto_hwcontrol; - this->dev_ready = NULL; - /* 25 us command delay time */ - this->chip_delay = 30; - this->eccmode = NAND_ECC_SOFT; - - /* Scan to find existance of the device */ - if (nand_scan (toto_mtd, 1)) { - err = -ENXIO; - goto out_mtd; - } - - /* Register the partitions */ - switch(toto_mtd->size){ - case SZ_64M: add_mtd_partitions(toto_mtd, partition_info64M, NUM_PARTITIONS64M); break; - case SZ_32M: add_mtd_partitions(toto_mtd, partition_info32M, NUM_PARTITIONS32M); break; - default: { - printk (KERN_WARNING "Unsupported Nand device\n"); - err = -ENXIO; - goto out_buf; - } - } - - gpioreserve(NAND_MASK); /* claim our gpios */ - archflashwp(0,0); /* open up flash for writing */ - - goto out; - -out_buf: - kfree (this->data_buf); -out_mtd: - kfree (toto_mtd); -out: - return err; -} - -module_init(toto_init); - -/* - * Clean up routine - */ -static void __exit toto_cleanup (void) -{ - /* Release resources, unregister device */ - nand_release (toto_mtd); - - /* Free the MTD device structure */ - kfree (toto_mtd); - - /* stop flash writes */ - archflashwp(0,1); - - /* release gpios to system */ - gpiorelease(NAND_MASK); -} -module_exit(toto_cleanup); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Richard Woodruff <r-woodruff2@ti.com>"); -MODULE_DESCRIPTION("Glue layer for NAND flash on toto board"); |