diff options
Diffstat (limited to 'drivers/mtd/maps')
36 files changed, 137 insertions, 2443 deletions
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 62ba82c396c..21b2874a303 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -66,11 +66,11 @@ config MTD_PHYSMAP_BANKWIDTH used internally by the CFI drivers. config MTD_PHYSMAP_OF - tristate "Flash device in physical memory map based on OF description" - depends on OF && (MTD_CFI || MTD_JEDECPROBE || MTD_ROM) + tristate "Memory device in physical memory map based on OF description" + depends on OF && (MTD_CFI || MTD_JEDECPROBE || MTD_ROM || MTD_RAM) help - This provides a 'mapping' driver which allows the NOR Flash and - ROM driver code to communicate with chips which are mapped + This provides a 'mapping' driver which allows the NOR Flash, ROM + and RAM driver code to communicate with chips which are mapped physically into the CPU's memory. The mapping description here is taken from OF device tree. @@ -108,7 +108,7 @@ config MTD_SUN_UFLASH config MTD_SC520CDP tristate "CFI Flash device mapped on AMD SC520 CDP" - depends on X86 && MTD_CFI + depends on (MELAN || COMPILE_TEST) && MTD_CFI help The SC520 CDP board has two banks of CFI-compliant chips and one Dual-in-line JEDEC chip. This 'mapping' driver supports that @@ -116,7 +116,7 @@ config MTD_SC520CDP config MTD_NETSC520 tristate "CFI Flash device mapped on AMD NetSc520" - depends on X86 && MTD_CFI + depends on (MELAN || COMPILE_TEST) && MTD_CFI help This enables access routines for the flash chips on the AMD NetSc520 demonstration board. If you have one of these boards and would like @@ -124,7 +124,7 @@ config MTD_NETSC520 config MTD_TS5500 tristate "JEDEC Flash device mapped on Technologic Systems TS-5500" - depends on X86 + depends on TS5500 || COMPILE_TEST select MTD_JEDECPROBE select MTD_CFI_AMDSTD help @@ -157,24 +157,6 @@ config MTD_PXA2XX help This provides a driver for the NOR flash attached to a PXA2xx chip. -config MTD_OCTAGON - tristate "JEDEC Flash device mapped on Octagon 5066 SBC" - depends on X86 && MTD_JEDEC && MTD_COMPLEX_MAPPINGS - help - This provides a 'mapping' driver which supports the way in which - the flash chips are connected in the Octagon-5066 Single Board - Computer. More information on the board is available at - <http://www.octagonsystems.com/products/5066.aspx>. - -config MTD_VMAX - tristate "JEDEC Flash device mapped on Tempustech VMAX SBC301" - depends on X86 && MTD_JEDEC && MTD_COMPLEX_MAPPINGS - help - This provides a 'mapping' driver which supports the way in which - the flash chips are connected in the Tempustech VMAX SBC301 Single - Board Computer. More information on the board is available at - <http://www.tempustech.com/>. - config MTD_SCx200_DOCFLASH tristate "Flash device mapped with DOCCS on NatSemi SCx200" depends on SCx200 && MTD_CFI @@ -249,22 +231,6 @@ config MTD_LANTIQ help Support for NOR flash attached to the Lantiq SoC's External Bus Unit. -config MTD_DILNETPC - tristate "CFI Flash device mapped on DIL/Net PC" - depends on X86 && MTD_CFI_INTELEXT && BROKEN - help - MTD map driver for SSV DIL/Net PC Boards "DNP" and "ADNP". - For details, see <http://www.ssv-embedded.de/ssv/pc104/p169.htm> - and <http://www.ssv-embedded.de/ssv/pc104/p170.htm> - -config MTD_DILNETPC_BOOTSIZE - hex "Size of DIL/Net PC flash boot partition" - depends on MTD_DILNETPC - default "0x80000" - help - The amount of space taken up by the kernel or Etherboot - on the DIL/Net PC flash chips. - config MTD_L440GX tristate "BIOS flash chip on Intel L440GX boards" depends on X86 && MTD_JEDECPROBE @@ -274,42 +240,6 @@ config MTD_L440GX BE VERY CAREFUL. -config MTD_TQM8XXL - tristate "CFI Flash device mapped on TQM8XXL" - depends on MTD_CFI && TQM8xxL - help - The TQM8xxL PowerPC board has up to two banks of CFI-compliant - chips, currently uses AMD one. This 'mapping' driver supports - that arrangement, allowing the CFI probe and command set driver - code to communicate with the chips on the TQM8xxL board. More at - <http://www.denx.de/wiki/PPCEmbedded/>. - -config MTD_RPXLITE - tristate "CFI Flash device mapped on RPX Lite or CLLF" - depends on MTD_CFI && (RPXCLASSIC || RPXLITE) - help - The RPXLite PowerPC board has CFI-compliant chips mapped in - a strange sparse mapping. This 'mapping' driver supports that - arrangement, allowing the CFI probe and command set driver code - to communicate with the chips on the RPXLite board. More at - <http://www.embeddedplanet.com/>. - -config MTD_MBX860 - tristate "System flash on MBX860 board" - depends on MTD_CFI && MBX - help - This enables access routines for the flash chips on the Motorola - MBX860 board. If you have one of these boards and would like - to use the flash chips on it, say 'Y'. - -config MTD_DBOX2 - tristate "CFI Flash device mapped on D-Box2" - depends on DBOX2 && MTD_CFI_INTELSTD && MTD_CFI_INTELEXT && MTD_CFI_AMDSTD - help - This enables access routines for the flash chips on the Nokia/Sagem - D-Box 2 board. If you have one of these boards and would like to use - the flash chips on it, say 'Y'. - config MTD_CFI_FLAGADM tristate "CFI Flash device mapping on FlagaDM" depends on 8xx && MTD_CFI @@ -349,22 +279,6 @@ config MTD_IXP4XX IXDP425 and Coyote. If you have an IXP4xx based board and would like to use the flash chips on it, say 'Y'. -config MTD_IXP2000 - tristate "CFI Flash device mapped on Intel IXP2000 based systems" - depends on MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP2000 - help - This enables MTD access to flash devices on platforms based - on Intel's IXP2000 family of network processors. If you have an - IXP2000 based board and would like to use the flash chips on it, - say 'Y'. - -config MTD_AUTCPU12 - bool "NV-RAM mapping AUTCPU12 board" - depends on ARCH_AUTCPU12 - help - This enables access to the NV-RAM on autronix autcpu12 board. - If you have such a board, say 'Y'. - config MTD_IMPA7 tristate "JEDEC Flash device mapped on impA7" depends on ARM && MTD_JEDECPROBE @@ -372,13 +286,6 @@ config MTD_IMPA7 This enables access to the NOR Flash on the impA7 board of implementa GmbH. If you have such a board, say 'Y' here. -config MTD_H720X - tristate "Hynix evaluation board mappings" - depends on MTD_CFI && ( ARCH_H7201 || ARCH_H7202 ) - help - This enables access to the flash chips on the Hynix evaluation boards. - If you have such a board, say 'Y'. - # This needs CFI or JEDEC, depending on the cards found. config MTD_PCI tristate "PCI MTD driver" @@ -419,7 +326,7 @@ config MTD_BFIN_ASYNC config MTD_GPIO_ADDR tristate "GPIO-assisted Flash Chip Support" - depends on GENERIC_GPIO || GPIOLIB + depends on GPIOLIB depends on MTD_COMPLEX_MAPPINGS help Map driver which allows flashes to be partially physically addressed @@ -429,19 +336,10 @@ config MTD_GPIO_ADDR config MTD_UCLINUX bool "Generic uClinux RAM/ROM filesystem support" - depends on MTD_RAM=y && (!MMU || COLDFIRE) + depends on (MTD_RAM=y || MTD_ROM=y) && (!MMU || COLDFIRE) help Map driver to support image based filesystems for uClinux. -config MTD_DMV182 - tristate "Map driver for Dy-4 SVME/DMV-182 board." - depends on DMV182 - select MTD_MAP_BANK_WIDTH_32 - select MTD_CFI_I8 - select MTD_CFI_AMDSTD - help - Map driver for Dy-4 SVME/DMV-182 board. - config MTD_INTEL_VR_NOR tristate "NOR flash on Intel Vermilion Range Expansion Bus CS0" depends on PCI diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index 4ded28711bc..141c91a5b24 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -9,7 +9,6 @@ endif # Chip mappings obj-$(CONFIG_MTD_CFI_FLAGADM) += cfi_flagadm.o obj-$(CONFIG_MTD_DC21285) += dc21285.o -obj-$(CONFIG_MTD_DILNETPC) += dilnetpc.o obj-$(CONFIG_MTD_L440GX) += l440gx.o obj-$(CONFIG_MTD_AMD76XROM) += amd76xrom.o obj-$(CONFIG_MTD_ESB2ROM) += esb2rom.o @@ -17,35 +16,25 @@ obj-$(CONFIG_MTD_ICHXROM) += ichxrom.o obj-$(CONFIG_MTD_CK804XROM) += ck804xrom.o obj-$(CONFIG_MTD_TSUNAMI) += tsunami_flash.o obj-$(CONFIG_MTD_PXA2XX) += pxa2xx-flash.o -obj-$(CONFIG_MTD_MBX860) += mbx860.o -obj-$(CONFIG_MTD_OCTAGON) += octagon-5066.o obj-$(CONFIG_MTD_PHYSMAP) += physmap.o obj-$(CONFIG_MTD_PHYSMAP_OF) += physmap_of.o obj-$(CONFIG_MTD_PISMO) += pismo.o obj-$(CONFIG_MTD_PMC_MSP_EVM) += pmcmsp-flash.o obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o -obj-$(CONFIG_MTD_RPXLITE) += rpxlite.o -obj-$(CONFIG_MTD_TQM8XXL) += tqm8xxl.o obj-$(CONFIG_MTD_SA1100) += sa1100-flash.o obj-$(CONFIG_MTD_SBC_GXX) += sbc_gxx.o obj-$(CONFIG_MTD_SC520CDP) += sc520cdp.o obj-$(CONFIG_MTD_NETSC520) += netsc520.o obj-$(CONFIG_MTD_TS5500) += ts5500_flash.o obj-$(CONFIG_MTD_SUN_UFLASH) += sun_uflash.o -obj-$(CONFIG_MTD_VMAX) += vmax301.o obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx200_docflash.o -obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.o obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o obj-$(CONFIG_MTD_PCI) += pci.o -obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o obj-$(CONFIG_MTD_IMPA7) += impa7.o obj-$(CONFIG_MTD_UCLINUX) += uclinux.o obj-$(CONFIG_MTD_NETtel) += nettel.o obj-$(CONFIG_MTD_SCB2_FLASH) += scb2_flash.o -obj-$(CONFIG_MTD_H720X) += h720x-flash.o obj-$(CONFIG_MTD_IXP4XX) += ixp4xx.o -obj-$(CONFIG_MTD_IXP2000) += ixp2000.o -obj-$(CONFIG_MTD_DMV182) += dmv182.o obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o diff --git a/drivers/mtd/maps/autcpu12-nvram.c b/drivers/mtd/maps/autcpu12-nvram.c deleted file mode 100644 index a2dc2ae4b24..00000000000 --- a/drivers/mtd/maps/autcpu12-nvram.c +++ /dev/null @@ -1,130 +0,0 @@ -/* - * NV-RAM memory access on autcpu12 - * (C) 2002 Thomas Gleixner (gleixner@autronix.de) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/sizes.h> - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/module.h> -#include <linux/platform_device.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> - -struct autcpu12_nvram_priv { - struct mtd_info *mtd; - struct map_info map; -}; - -static int autcpu12_nvram_probe(struct platform_device *pdev) -{ - map_word tmp, save0, save1; - struct resource *res; - struct autcpu12_nvram_priv *priv; - - priv = devm_kzalloc(&pdev->dev, - sizeof(struct autcpu12_nvram_priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - platform_set_drvdata(pdev, priv); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "failed to get memory resource\n"); - return -ENOENT; - } - - priv->map.bankwidth = 4; - priv->map.phys = res->start; - priv->map.size = resource_size(res); - priv->map.virt = devm_request_and_ioremap(&pdev->dev, res); - strcpy((char *)priv->map.name, res->name); - if (!priv->map.virt) { - dev_err(&pdev->dev, "failed to remap mem resource\n"); - return -EBUSY; - } - - simple_map_init(&priv->map); - - /* - * Check for 32K/128K - * read ofs 0 - * read ofs 0x10000 - * Write complement to ofs 0x100000 - * Read and check result on ofs 0x0 - * Restore contents - */ - save0 = map_read(&priv->map, 0); - save1 = map_read(&priv->map, 0x10000); - tmp.x[0] = ~save0.x[0]; - map_write(&priv->map, tmp, 0x10000); - tmp = map_read(&priv->map, 0); - /* if we find this pattern on 0x0, we have 32K size */ - if (!map_word_equal(&priv->map, tmp, save0)) { - map_write(&priv->map, save0, 0x0); - priv->map.size = SZ_32K; - } else - map_write(&priv->map, save1, 0x10000); - - priv->mtd = do_map_probe("map_ram", &priv->map); - if (!priv->mtd) { - dev_err(&pdev->dev, "probing failed\n"); - return -ENXIO; - } - - priv->mtd->owner = THIS_MODULE; - priv->mtd->erasesize = 16; - priv->mtd->dev.parent = &pdev->dev; - if (!mtd_device_register(priv->mtd, NULL, 0)) { - dev_info(&pdev->dev, - "NV-RAM device size %ldKiB registered on AUTCPU12\n", - priv->map.size / SZ_1K); - return 0; - } - - map_destroy(priv->mtd); - dev_err(&pdev->dev, "NV-RAM device addition failed\n"); - return -ENOMEM; -} - -static int autcpu12_nvram_remove(struct platform_device *pdev) -{ - struct autcpu12_nvram_priv *priv = platform_get_drvdata(pdev); - - mtd_device_unregister(priv->mtd); - map_destroy(priv->mtd); - - return 0; -} - -static struct platform_driver autcpu12_nvram_driver = { - .driver = { - .name = "autcpu12_nvram", - .owner = THIS_MODULE, - }, - .probe = autcpu12_nvram_probe, - .remove = autcpu12_nvram_remove, -}; -module_platform_driver(autcpu12_nvram_driver); - -MODULE_AUTHOR("Thomas Gleixner"); -MODULE_DESCRIPTION("autcpu12 NVRAM map driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/mtd/maps/bfin-async-flash.c b/drivers/mtd/maps/bfin-async-flash.c index f833edfaab7..6ea51e54904 100644 --- a/drivers/mtd/maps/bfin-async-flash.c +++ b/drivers/mtd/maps/bfin-async-flash.c @@ -14,7 +14,6 @@ * Licensed under the GPL-2 or later. */ -#include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/mtd/mtd.h> @@ -122,12 +121,13 @@ static void bfin_flash_copy_to(struct map_info *map, unsigned long to, const voi switch_back(state); } -static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL }; +static const char * const part_probe_types[] = { + "cmdlinepart", "RedBoot", NULL }; static int bfin_flash_probe(struct platform_device *pdev) { int ret; - struct physmap_flash_data *pdata = pdev->dev.platform_data; + struct physmap_flash_data *pdata = dev_get_platdata(&pdev->dev); struct resource *memory = platform_get_resource(pdev, IORESOURCE_MEM, 0); struct resource *flash_ambctl = platform_get_resource(pdev, IORESOURCE_MEM, 1); struct async_state *state; diff --git a/drivers/mtd/maps/cfi_flagadm.c b/drivers/mtd/maps/cfi_flagadm.c index d16fc9d3b8c..d504b3d1791 100644 --- a/drivers/mtd/maps/cfi_flagadm.c +++ b/drivers/mtd/maps/cfi_flagadm.c @@ -55,13 +55,13 @@ #define FLASH_PARTITION3_SIZE 0x001C0000 -struct map_info flagadm_map = { +static struct map_info flagadm_map = { .name = "FlagaDM flash device", .size = FLASH_SIZE, .bankwidth = 2, }; -struct mtd_partition flagadm_parts[] = { +static struct mtd_partition flagadm_parts[] = { { .name = "Bootloader", .offset = FLASH_PARTITION0_ADDR, @@ -112,7 +112,7 @@ static int __init init_flagadm(void) return 0; } - iounmap((void *)flagadm_map.virt); + iounmap((void __iomem *)flagadm_map.virt); return -ENXIO; } @@ -123,8 +123,8 @@ static void __exit cleanup_flagadm(void) map_destroy(mymtd); } if (flagadm_map.virt) { - iounmap((void *)flagadm_map.virt); - flagadm_map.virt = 0; + iounmap((void __iomem *)flagadm_map.virt); + flagadm_map.virt = NULL; } } diff --git a/drivers/mtd/maps/ck804xrom.c b/drivers/mtd/maps/ck804xrom.c index 586a1c77e48..0455166f05f 100644 --- a/drivers/mtd/maps/ck804xrom.c +++ b/drivers/mtd/maps/ck804xrom.c @@ -308,8 +308,7 @@ static int ck804xrom_init_one(struct pci_dev *pdev, out: /* Free any left over map structures */ - if (map) - kfree(map); + kfree(map); /* See if I have any map structures */ if (list_empty(&window->maps)) { diff --git a/drivers/mtd/maps/dbox2-flash.c b/drivers/mtd/maps/dbox2-flash.c deleted file mode 100644 index 85bdece6ab3..00000000000 --- a/drivers/mtd/maps/dbox2-flash.c +++ /dev/null @@ -1,123 +0,0 @@ -/* - * D-Box 2 flash driver - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <asm/io.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/partitions.h> -#include <linux/errno.h> - -/* partition_info gives details on the logical partitions that the split the - * single flash device into. If the size if zero we use up to the end of the - * device. */ -static struct mtd_partition partition_info[]= { - { - .name = "BR bootloader", - .size = 128 * 1024, - .offset = 0, - .mask_flags = MTD_WRITEABLE - }, - { - .name = "FLFS (U-Boot)", - .size = 128 * 1024, - .offset = MTDPART_OFS_APPEND, - .mask_flags = 0 - }, - { - .name = "Root (SquashFS)", - .size = 7040 * 1024, - .offset = MTDPART_OFS_APPEND, - .mask_flags = 0 - }, - { - .name = "var (JFFS2)", - .size = 896 * 1024, - .offset = MTDPART_OFS_APPEND, - .mask_flags = 0 - }, - { - .name = "Flash without bootloader", - .size = MTDPART_SIZ_FULL, - .offset = 128 * 1024, - .mask_flags = 0 - }, - { - .name = "Complete Flash", - .size = MTDPART_SIZ_FULL, - .offset = 0, - .mask_flags = MTD_WRITEABLE - } -}; - -#define NUM_PARTITIONS ARRAY_SIZE(partition_info) - -#define WINDOW_ADDR 0x10000000 -#define WINDOW_SIZE 0x800000 - -static struct mtd_info *mymtd; - - -struct map_info dbox2_flash_map = { - .name = "D-Box 2 flash memory", - .size = WINDOW_SIZE, - .bankwidth = 4, - .phys = WINDOW_ADDR, -}; - -static int __init init_dbox2_flash(void) -{ - printk(KERN_NOTICE "D-Box 2 flash driver (size->0x%X mem->0x%X)\n", WINDOW_SIZE, WINDOW_ADDR); - dbox2_flash_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE); - - if (!dbox2_flash_map.virt) { - printk("Failed to ioremap\n"); - return -EIO; - } - simple_map_init(&dbox2_flash_map); - - // Probe for dual Intel 28F320 or dual AMD - mymtd = do_map_probe("cfi_probe", &dbox2_flash_map); - if (!mymtd) { - // Probe for single Intel 28F640 - dbox2_flash_map.bankwidth = 2; - - mymtd = do_map_probe("cfi_probe", &dbox2_flash_map); - } - - if (mymtd) { - mymtd->owner = THIS_MODULE; - - /* Create MTD devices for each partition. */ - mtd_device_register(mymtd, partition_info, NUM_PARTITIONS); - - return 0; - } - - iounmap((void *)dbox2_flash_map.virt); - return -ENXIO; -} - -static void __exit cleanup_dbox2_flash(void) -{ - if (mymtd) { - mtd_device_unregister(mymtd); - map_destroy(mymtd); - } - if (dbox2_flash_map.virt) { - iounmap((void *)dbox2_flash_map.virt); - dbox2_flash_map.virt = 0; - } -} - -module_init(init_dbox2_flash); -module_exit(cleanup_dbox2_flash); - - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Kári Davíðsson <kd@flaga.is>, Bastian Blank <waldi@tuxbox.org>, Alexander Wild <wild@te-elektronik.com>"); -MODULE_DESCRIPTION("MTD map driver for D-Box 2 board"); diff --git a/drivers/mtd/maps/dc21285.c b/drivers/mtd/maps/dc21285.c index 080f06053bd..f8a7dd14cee 100644 --- a/drivers/mtd/maps/dc21285.c +++ b/drivers/mtd/maps/dc21285.c @@ -143,9 +143,8 @@ static struct map_info dc21285_map = { .copy_from = dc21285_copy_from, }; - /* Partition stuff */ -static const char *probes[] = { "RedBoot", "cmdlinepart", NULL }; +static const char * const probes[] = { "RedBoot", "cmdlinepart", NULL }; static int __init init_dc21285(void) { diff --git a/drivers/mtd/maps/dilnetpc.c b/drivers/mtd/maps/dilnetpc.c deleted file mode 100644 index 3e393f0da82..00000000000 --- a/drivers/mtd/maps/dilnetpc.c +++ /dev/null @@ -1,496 +0,0 @@ -/* dilnetpc.c -- MTD map driver for SSV DIL/Net PC Boards "DNP" and "ADNP" - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA - * - * The DIL/Net PC is a tiny embedded PC board made by SSV Embedded Systems - * featuring the AMD Elan SC410 processor. There are two variants of this - * board: DNP/1486 and ADNP/1486. The DNP version has 2 megs of flash - * ROM (Intel 28F016S3) and 8 megs of DRAM, the ADNP version has 4 megs - * flash and 16 megs of RAM. - * For details, see http://www.ssv-embedded.de/ssv/pc104/p169.htm - * and http://www.ssv-embedded.de/ssv/pc104/p170.htm - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/string.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/concat.h> - -#include <asm/io.h> - -/* -** The DIL/NetPC keeps its BIOS in two distinct flash blocks. -** Destroying any of these blocks transforms the DNPC into -** a paperweight (albeit not a very useful one, considering -** it only weighs a few grams). -** -** Therefore, the BIOS blocks must never be erased or written to -** except by people who know exactly what they are doing (e.g. -** to install a BIOS update). These partitions are marked read-only -** by default, but can be made read/write by undefining -** DNPC_BIOS_BLOCKS_WRITEPROTECTED: -*/ -#define DNPC_BIOS_BLOCKS_WRITEPROTECTED - -/* -** The ID string (in ROM) is checked to determine whether we -** are running on a DNP/1486 or ADNP/1486 -*/ -#define BIOSID_BASE 0x000fe100 - -#define ID_DNPC "DNP1486" -#define ID_ADNP "ADNP1486" - -/* -** Address where the flash should appear in CPU space -*/ -#define FLASH_BASE 0x2000000 - -/* -** Chip Setup and Control (CSC) indexed register space -*/ -#define CSC_INDEX 0x22 -#define CSC_DATA 0x23 - -#define CSC_MMSWAR 0x30 /* MMS window C-F attributes register */ -#define CSC_MMSWDSR 0x31 /* MMS window C-F device select register */ - -#define CSC_RBWR 0xa7 /* GPIO Read-Back/Write Register B */ - -#define CSC_CR 0xd0 /* internal I/O device disable/Echo */ - /* Z-bus/configuration register */ - -#define CSC_PCCMDCR 0xf1 /* PC card mode and DMA control register */ - - -/* -** PC Card indexed register space: -*/ - -#define PCC_INDEX 0x3e0 -#define PCC_DATA 0x3e1 - -#define PCC_AWER_B 0x46 /* Socket B Address Window enable register */ -#define PCC_MWSAR_1_Lo 0x58 /* memory window 1 start address low register */ -#define PCC_MWSAR_1_Hi 0x59 /* memory window 1 start address high register */ -#define PCC_MWEAR_1_Lo 0x5A /* memory window 1 stop address low register */ -#define PCC_MWEAR_1_Hi 0x5B /* memory window 1 stop address high register */ -#define PCC_MWAOR_1_Lo 0x5C /* memory window 1 address offset low register */ -#define PCC_MWAOR_1_Hi 0x5D /* memory window 1 address offset high register */ - - -/* -** Access to SC4x0's Chip Setup and Control (CSC) -** and PC Card (PCC) indexed registers: -*/ -static inline void setcsc(int reg, unsigned char data) -{ - outb(reg, CSC_INDEX); - outb(data, CSC_DATA); -} - -static inline unsigned char getcsc(int reg) -{ - outb(reg, CSC_INDEX); - return(inb(CSC_DATA)); -} - -static inline void setpcc(int reg, unsigned char data) -{ - outb(reg, PCC_INDEX); - outb(data, PCC_DATA); -} - -static inline unsigned char getpcc(int reg) -{ - outb(reg, PCC_INDEX); - return(inb(PCC_DATA)); -} - - -/* -************************************************************ -** Enable access to DIL/NetPC's flash by mapping it into -** the SC4x0's MMS Window C. -************************************************************ -*/ -static void dnpc_map_flash(unsigned long flash_base, unsigned long flash_size) -{ - unsigned long flash_end = flash_base + flash_size - 1; - - /* - ** enable setup of MMS windows C-F: - */ - /* - enable PC Card indexed register space */ - setcsc(CSC_CR, getcsc(CSC_CR) | 0x2); - /* - set PC Card controller to operate in standard mode */ - setcsc(CSC_PCCMDCR, getcsc(CSC_PCCMDCR) & ~1); - - /* - ** Program base address and end address of window - ** where the flash ROM should appear in CPU address space - */ - setpcc(PCC_MWSAR_1_Lo, (flash_base >> 12) & 0xff); - setpcc(PCC_MWSAR_1_Hi, (flash_base >> 20) & 0x3f); - setpcc(PCC_MWEAR_1_Lo, (flash_end >> 12) & 0xff); - setpcc(PCC_MWEAR_1_Hi, (flash_end >> 20) & 0x3f); - - /* program offset of first flash location to appear in this window (0) */ - setpcc(PCC_MWAOR_1_Lo, ((0 - flash_base) >> 12) & 0xff); - setpcc(PCC_MWAOR_1_Hi, ((0 - flash_base)>> 20) & 0x3f); - - /* set attributes for MMS window C: non-cacheable, write-enabled */ - setcsc(CSC_MMSWAR, getcsc(CSC_MMSWAR) & ~0x11); - - /* select physical device ROMCS0 (i.e. flash) for MMS Window C */ - setcsc(CSC_MMSWDSR, getcsc(CSC_MMSWDSR) & ~0x03); - - /* enable memory window 1 */ - setpcc(PCC_AWER_B, getpcc(PCC_AWER_B) | 0x02); - - /* now disable PC Card indexed register space again */ - setcsc(CSC_CR, getcsc(CSC_CR) & ~0x2); -} - - -/* -************************************************************ -** Disable access to DIL/NetPC's flash by mapping it into -** the SC4x0's MMS Window C. -************************************************************ -*/ -static void dnpc_unmap_flash(void) -{ - /* - enable PC Card indexed register space */ - setcsc(CSC_CR, getcsc(CSC_CR) | 0x2); - - /* disable memory window 1 */ - setpcc(PCC_AWER_B, getpcc(PCC_AWER_B) & ~0x02); - - /* now disable PC Card indexed register space again */ - setcsc(CSC_CR, getcsc(CSC_CR) & ~0x2); -} - - - -/* -************************************************************ -** Enable/Disable VPP to write to flash -************************************************************ -*/ - -static DEFINE_SPINLOCK(dnpc_spin); -static int vpp_counter = 0; -/* -** This is what has to be done for the DNP board .. -*/ -static void dnp_set_vpp(struct map_info *not_used, int on) -{ - spin_lock_irq(&dnpc_spin); - - if (on) - { - if(++vpp_counter == 1) - setcsc(CSC_RBWR, getcsc(CSC_RBWR) & ~0x4); - } - else - { - if(--vpp_counter == 0) - setcsc(CSC_RBWR, getcsc(CSC_RBWR) | 0x4); - else - BUG_ON(vpp_counter < 0); - } - spin_unlock_irq(&dnpc_spin); -} - -/* -** .. and this the ADNP version: -*/ -static void adnp_set_vpp(struct map_info *not_used, int on) -{ - spin_lock_irq(&dnpc_spin); - - if (on) - { - if(++vpp_counter == 1) - setcsc(CSC_RBWR, getcsc(CSC_RBWR) & ~0x8); - } - else - { - if(--vpp_counter == 0) - setcsc(CSC_RBWR, getcsc(CSC_RBWR) | 0x8); - else - BUG_ON(vpp_counter < 0); - } - spin_unlock_irq(&dnpc_spin); -} - - - -#define DNP_WINDOW_SIZE 0x00200000 /* DNP flash size is 2MiB */ -#define ADNP_WINDOW_SIZE 0x00400000 /* ADNP flash size is 4MiB */ -#define WINDOW_ADDR FLASH_BASE - -static struct map_info dnpc_map = { - .name = "ADNP Flash Bank", - .size = ADNP_WINDOW_SIZE, - .bankwidth = 1, - .set_vpp = adnp_set_vpp, - .phys = WINDOW_ADDR -}; - -/* -** The layout of the flash is somewhat "strange": -** -** 1. 960 KiB (15 blocks) : Space for ROM Bootloader and user data -** 2. 64 KiB (1 block) : System BIOS -** 3. 960 KiB (15 blocks) : User Data (DNP model) or -** 3. 3008 KiB (47 blocks) : User Data (ADNP model) -** 4. 64 KiB (1 block) : System BIOS Entry -*/ - -static struct mtd_partition partition_info[]= -{ - { - .name = "ADNP boot", - .offset = 0, - .size = 0xf0000, - }, - { - .name = "ADNP system BIOS", - .offset = MTDPART_OFS_NXTBLK, - .size = 0x10000, -#ifdef DNPC_BIOS_BLOCKS_WRITEPROTECTED - .mask_flags = MTD_WRITEABLE, -#endif - }, - { - .name = "ADNP file system", - .offset = MTDPART_OFS_NXTBLK, - .size = 0x2f0000, - }, - { - .name = "ADNP system BIOS entry", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, -#ifdef DNPC_BIOS_BLOCKS_WRITEPROTECTED - .mask_flags = MTD_WRITEABLE, -#endif - }, -}; - -#define NUM_PARTITIONS ARRAY_SIZE(partition_info) - -static struct mtd_info *mymtd; -static struct mtd_info *lowlvl_parts[NUM_PARTITIONS]; -static struct mtd_info *merged_mtd; - -/* -** "Highlevel" partition info: -** -** Using the MTD concat layer, we can re-arrange partitions to our -** liking: we construct a virtual MTD device by concatenating the -** partitions, specifying the sequence such that the boot block -** is immediately followed by the filesystem block (i.e. the stupid -** system BIOS block is mapped to a different place). When re-partitioning -** this concatenated MTD device, we can set the boot block size to -** an arbitrary (though erase block aligned) value i.e. not one that -** is dictated by the flash's physical layout. We can thus set the -** boot block to be e.g. 64 KB (which is fully sufficient if we want -** to boot an etherboot image) or to -say- 1.5 MB if we want to boot -** a large kernel image. In all cases, the remainder of the flash -** is available as file system space. -*/ - -static struct mtd_partition higlvl_partition_info[]= -{ - { - .name = "ADNP boot block", - .offset = 0, - .size = CONFIG_MTD_DILNETPC_BOOTSIZE, - }, - { - .name = "ADNP file system space", - .offset = MTDPART_OFS_NXTBLK, - .size = ADNP_WINDOW_SIZE-CONFIG_MTD_DILNETPC_BOOTSIZE-0x20000, - }, - { - .name = "ADNP system BIOS + BIOS Entry", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, -#ifdef DNPC_BIOS_BLOCKS_WRITEPROTECTED - .mask_flags = MTD_WRITEABLE, -#endif - }, -}; - -#define NUM_HIGHLVL_PARTITIONS ARRAY_SIZE(higlvl_partition_info) - - -static int dnp_adnp_probe(void) -{ - char *biosid, rc = -1; - - biosid = (char*)ioremap(BIOSID_BASE, 16); - if(biosid) - { - if(!strcmp(biosid, ID_DNPC)) - rc = 1; /* this is a DNPC */ - else if(!strcmp(biosid, ID_ADNP)) - rc = 0; /* this is a ADNPC */ - } - iounmap((void *)biosid); - return(rc); -} - - -static int __init init_dnpc(void) -{ - int is_dnp; - - /* - ** determine hardware (DNP/ADNP/invalid) - */ - if((is_dnp = dnp_adnp_probe()) < 0) - return -ENXIO; - - /* - ** Things are set up for ADNP by default - ** -> modify all that needs to be different for DNP - */ - if(is_dnp) - { /* - ** Adjust window size, select correct set_vpp function. - ** The partitioning scheme is identical on both DNP - ** and ADNP except for the size of the third partition. - */ - int i; - dnpc_map.size = DNP_WINDOW_SIZE; - dnpc_map.set_vpp = dnp_set_vpp; - partition_info[2].size = 0xf0000; - - /* - ** increment all string pointers so the leading 'A' gets skipped, - ** thus turning all occurrences of "ADNP ..." into "DNP ..." - */ - ++dnpc_map.name; - for(i = 0; i < NUM_PARTITIONS; i++) - ++partition_info[i].name; - higlvl_partition_info[1].size = DNP_WINDOW_SIZE - - CONFIG_MTD_DILNETPC_BOOTSIZE - 0x20000; - for(i = 0; i < NUM_HIGHLVL_PARTITIONS; i++) - ++higlvl_partition_info[i].name; - } - - printk(KERN_NOTICE "DIL/Net %s flash: 0x%lx at 0x%llx\n", - is_dnp ? "DNPC" : "ADNP", dnpc_map.size, (unsigned long long)dnpc_map.phys); - - dnpc_map.virt = ioremap_nocache(dnpc_map.phys, dnpc_map.size); - - dnpc_map_flash(dnpc_map.phys, dnpc_map.size); - - if (!dnpc_map.virt) { - printk("Failed to ioremap_nocache\n"); - return -EIO; - } - simple_map_init(&dnpc_map); - - printk("FLASH virtual address: 0x%p\n", dnpc_map.virt); - - mymtd = do_map_probe("jedec_probe", &dnpc_map); - - if (!mymtd) - mymtd = do_map_probe("cfi_probe", &dnpc_map); - - /* - ** If flash probes fail, try to make flashes accessible - ** at least as ROM. Ajust erasesize in this case since - ** the default one (128M) will break our partitioning - */ - if (!mymtd) - if((mymtd = do_map_probe("map_rom", &dnpc_map))) - mymtd->erasesize = 0x10000; - - if (!mymtd) { - iounmap(dnpc_map.virt); - return -ENXIO; - } - - mymtd->owner = THIS_MODULE; - - /* - ** Supply pointers to lowlvl_parts[] array to add_mtd_partitions() - ** -> add_mtd_partitions() will _not_ register MTD devices for - ** the partitions, but will instead store pointers to the MTD - ** objects it creates into our lowlvl_parts[] array. - ** NOTE: we arrange the pointers such that the sequence of the - ** partitions gets re-arranged: partition #2 follows - ** partition #0. - */ - partition_info[0].mtdp = &lowlvl_parts[0]; - partition_info[1].mtdp = &lowlvl_parts[2]; - partition_info[2].mtdp = &lowlvl_parts[1]; - partition_info[3].mtdp = &lowlvl_parts[3]; - - mtd_device_register(mymtd, partition_info, NUM_PARTITIONS); - - /* - ** now create a virtual MTD device by concatenating the for partitions - ** (in the sequence given by the lowlvl_parts[] array. - */ - merged_mtd = mtd_concat_create(lowlvl_parts, NUM_PARTITIONS, "(A)DNP Flash Concatenated"); - if(merged_mtd) - { /* - ** now partition the new device the way we want it. This time, - ** we do not supply mtd pointers in higlvl_partition_info, so - ** add_mtd_partitions() will register the devices. - */ - mtd_device_register(merged_mtd, higlvl_partition_info, - NUM_HIGHLVL_PARTITIONS); - } - - return 0; -} - -static void __exit cleanup_dnpc(void) -{ - if(merged_mtd) { - mtd_device_unregister(merged_mtd); - mtd_concat_destroy(merged_mtd); - } - - if (mymtd) { - mtd_device_unregister(mymtd); - map_destroy(mymtd); - } - if (dnpc_map.virt) { - iounmap(dnpc_map.virt); - dnpc_unmap_flash(); - dnpc_map.virt = NULL; - } -} - -module_init(init_dnpc); -module_exit(cleanup_dnpc); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Sysgo Real-Time Solutions GmbH"); -MODULE_DESCRIPTION("MTD map driver for SSV DIL/NetPC DNP & ADNP"); diff --git a/drivers/mtd/maps/dmv182.c b/drivers/mtd/maps/dmv182.c deleted file mode 100644 index 6538ac675e0..00000000000 --- a/drivers/mtd/maps/dmv182.c +++ /dev/null @@ -1,146 +0,0 @@ - -/* - * drivers/mtd/maps/dmv182.c - * - * Flash map driver for the Dy4 SVME182 board - * - * Copyright 2003-2004, TimeSys Corporation - * - * Based on the SVME181 flash map, by Tom Nelson, Dot4, Inc. for TimeSys Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <asm/io.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/partitions.h> -#include <linux/errno.h> - -/* - * This driver currently handles only the 16MiB user flash bank 1 on the - * board. It does not provide access to bank 0 (contains the Dy4 FFW), bank 2 - * (VxWorks boot), or the optional 48MiB expansion flash. - * - * scott.wood@timesys.com: On the newer boards with 128MiB flash, it - * now supports the first 96MiB (the boot flash bank containing FFW - * is excluded). The VxWorks loader is in partition 1. - */ - -#define FLASH_BASE_ADDR 0xf0000000 -#define FLASH_BANK_SIZE (128*1024*1024) - -MODULE_AUTHOR("Scott Wood, TimeSys Corporation <scott.wood@timesys.com>"); -MODULE_DESCRIPTION("User-programmable flash device on the Dy4 SVME182 board"); -MODULE_LICENSE("GPL"); - -static struct map_info svme182_map = { - .name = "Dy4 SVME182", - .bankwidth = 32, - .size = 128 * 1024 * 1024 -}; - -#define BOOTIMAGE_PART_SIZE ((6*1024*1024)-RESERVED_PART_SIZE) - -// Allow 6MiB for the kernel -#define NEW_BOOTIMAGE_PART_SIZE (6 * 1024 * 1024) -// Allow 1MiB for the bootloader -#define NEW_BOOTLOADER_PART_SIZE (1024 * 1024) -// Use the remaining 9MiB at the end of flash for the RFS -#define NEW_RFS_PART_SIZE (0x01000000 - NEW_BOOTLOADER_PART_SIZE - \ - NEW_BOOTIMAGE_PART_SIZE) - -static struct mtd_partition svme182_partitions[] = { - // The Lower PABS is only 128KiB, but the partition code doesn't - // like partitions that don't end on the largest erase block - // size of the device, even if all of the erase blocks in the - // partition are small ones. The hardware should prevent - // writes to the actual PABS areas. - { - name: "Lower PABS and CPU 0 bootloader or kernel", - size: 6*1024*1024, - offset: 0, - }, - { - name: "Root Filesystem", - size: 10*1024*1024, - offset: MTDPART_OFS_NXTBLK - }, - { - name: "CPU1 Bootloader", - size: 1024*1024, - offset: MTDPART_OFS_NXTBLK, - }, - { - name: "Extra", - size: 110*1024*1024, - offset: MTDPART_OFS_NXTBLK - }, - { - name: "Foundation Firmware and Upper PABS", - size: 1024*1024, - offset: MTDPART_OFS_NXTBLK, - mask_flags: MTD_WRITEABLE // read-only - } -}; - -static struct mtd_info *this_mtd; - -static int __init init_svme182(void) -{ - struct mtd_partition *partitions; - int num_parts = ARRAY_SIZE(svme182_partitions); - - partitions = svme182_partitions; - - svme182_map.virt = ioremap(FLASH_BASE_ADDR, svme182_map.size); - - if (svme182_map.virt == 0) { - printk("Failed to ioremap FLASH memory area.\n"); - return -EIO; - } - - simple_map_init(&svme182_map); - - this_mtd = do_map_probe("cfi_probe", &svme182_map); - if (!this_mtd) - { - iounmap((void *)svme182_map.virt); - return -ENXIO; - } - - printk(KERN_NOTICE "SVME182 flash device: %dMiB at 0x%08x\n", - this_mtd->size >> 20, FLASH_BASE_ADDR); - - this_mtd->owner = THIS_MODULE; - mtd_device_register(this_mtd, partitions, num_parts); - - return 0; -} - -static void __exit cleanup_svme182(void) -{ - if (this_mtd) - { - mtd_device_unregister(this_mtd); - map_destroy(this_mtd); - } - - if (svme182_map.virt) - { - iounmap((void *)svme182_map.virt); - svme182_map.virt = 0; - } - - return; -} - -module_init(init_svme182); -module_exit(cleanup_svme182); diff --git a/drivers/mtd/maps/gpio-addr-flash.c b/drivers/mtd/maps/gpio-addr-flash.c index 7b643de2500..a4c477b9fdd 100644 --- a/drivers/mtd/maps/gpio-addr-flash.c +++ b/drivers/mtd/maps/gpio-addr-flash.c @@ -14,7 +14,6 @@ */ #include <linux/gpio.h> -#include <linux/init.h> #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> @@ -157,7 +156,8 @@ static void gf_copy_to(struct map_info *map, unsigned long to, memcpy_toio(map->virt + (to % state->win_size), from, len); } -static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL }; +static const char * const part_probe_types[] = { + "cmdlinepart", "RedBoot", NULL }; /** * gpio_flash_probe() - setup a mapping for a GPIO assisted flash @@ -195,7 +195,7 @@ static int gpio_flash_probe(struct platform_device *pdev) struct resource *gpios; struct async_state *state; - pdata = pdev->dev.platform_data; + pdata = dev_get_platdata(&pdev->dev); memory = platform_get_resource(pdev, IORESOURCE_MEM, 0); gpios = platform_get_resource(pdev, IORESOURCE_IRQ, 0); diff --git a/drivers/mtd/maps/h720x-flash.c b/drivers/mtd/maps/h720x-flash.c deleted file mode 100644 index 8ed6cb4529d..00000000000 --- a/drivers/mtd/maps/h720x-flash.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * Flash memory access on Hynix GMS30C7201/HMS30C7202 based - * evaluation boards - * - * (C) 2002 Jungjun Kim <jungjun.kim@hynix.com> - * 2003 Thomas Gleixner <tglx@linutronix.de> - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/slab.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/partitions.h> -#include <mach/hardware.h> -#include <asm/io.h> - -static struct mtd_info *mymtd; - -static struct map_info h720x_map = { - .name = "H720X", - .bankwidth = 4, - .size = H720X_FLASH_SIZE, - .phys = H720X_FLASH_PHYS, -}; - -static struct mtd_partition h720x_partitions[] = { - { - .name = "ArMon", - .size = 0x00080000, - .offset = 0, - .mask_flags = MTD_WRITEABLE - },{ - .name = "Env", - .size = 0x00040000, - .offset = 0x00080000, - .mask_flags = MTD_WRITEABLE - },{ - .name = "Kernel", - .size = 0x00180000, - .offset = 0x000c0000, - .mask_flags = MTD_WRITEABLE - },{ - .name = "Ramdisk", - .size = 0x00400000, - .offset = 0x00240000, - .mask_flags = MTD_WRITEABLE - },{ - .name = "jffs2", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND - } -}; - -#define NUM_PARTITIONS ARRAY_SIZE(h720x_partitions) - -/* - * Initialize FLASH support - */ -static int __init h720x_mtd_init(void) -{ - h720x_map.virt = ioremap(h720x_map.phys, h720x_map.size); - - if (!h720x_map.virt) { - printk(KERN_ERR "H720x-MTD: ioremap failed\n"); - return -EIO; - } - - simple_map_init(&h720x_map); - - // Probe for flash bankwidth 4 - printk (KERN_INFO "H720x-MTD probing 32bit FLASH\n"); - mymtd = do_map_probe("cfi_probe", &h720x_map); - if (!mymtd) { - printk (KERN_INFO "H720x-MTD probing 16bit FLASH\n"); - // Probe for bankwidth 2 - h720x_map.bankwidth = 2; - mymtd = do_map_probe("cfi_probe", &h720x_map); - } - - if (mymtd) { - mymtd->owner = THIS_MODULE; - - mtd_device_parse_register(mymtd, NULL, NULL, - h720x_partitions, NUM_PARTITIONS); - return 0; - } - - iounmap((void *)h720x_map.virt); - return -ENXIO; -} - -/* - * Cleanup - */ -static void __exit h720x_mtd_cleanup(void) -{ - - if (mymtd) { - mtd_device_unregister(mymtd); - map_destroy(mymtd); - } - - if (h720x_map.virt) { - iounmap((void *)h720x_map.virt); - h720x_map.virt = 0; - } -} - - -module_init(h720x_mtd_init); -module_exit(h720x_mtd_cleanup); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Thomas Gleixner <tglx@linutronix.de>"); -MODULE_DESCRIPTION("MTD map driver for Hynix evaluation boards"); diff --git a/drivers/mtd/maps/impa7.c b/drivers/mtd/maps/impa7.c index 834a06c56f5..15bbda03be6 100644 --- a/drivers/mtd/maps/impa7.c +++ b/drivers/mtd/maps/impa7.c @@ -24,14 +24,12 @@ #define NUM_FLASHBANKS 2 #define BUSWIDTH 4 -/* can be { "cfi_probe", "jedec_probe", "map_rom", NULL } */ -#define PROBETYPES { "jedec_probe", NULL } - #define MSG_PREFIX "impA7:" /* prefix for our printk()'s */ #define MTDID "impa7-%d" /* for mtdparts= partitioning */ static struct mtd_info *impa7_mtd[NUM_FLASHBANKS]; +static const char * const rom_probe_types[] = { "jedec_probe", NULL }; static struct map_info impa7_map[NUM_FLASHBANKS] = { { @@ -60,8 +58,7 @@ static struct mtd_partition partitions[] = static int __init init_impa7(void) { - static const char *rom_probe_types[] = PROBETYPES; - const char **type; + const char * const *type; int i; static struct { u_long addr; u_long size; } pt[NUM_FLASHBANKS] = { { WINDOW_ADDR0, WINDOW_SIZE0 }, @@ -82,7 +79,7 @@ static int __init init_impa7(void) } simple_map_init(&impa7_map[i]); - impa7_mtd[i] = 0; + impa7_mtd[i] = NULL; type = rom_probe_types; for(; !impa7_mtd[i] && *type; type++) { impa7_mtd[i] = do_map_probe(*type, &impa7_map[i]); @@ -94,9 +91,9 @@ static int __init init_impa7(void) mtd_device_parse_register(impa7_mtd[i], NULL, NULL, partitions, ARRAY_SIZE(partitions)); + } else { + iounmap((void __iomem *)impa7_map[i].virt); } - else - iounmap((void *)impa7_map[i].virt); } return devicesfound == 0 ? -ENXIO : 0; } @@ -108,8 +105,8 @@ static void __exit cleanup_impa7(void) if (impa7_mtd[i]) { mtd_device_unregister(impa7_mtd[i]); map_destroy(impa7_mtd[i]); - iounmap((void *)impa7_map[i].virt); - impa7_map[i].virt = 0; + iounmap((void __iomem *)impa7_map[i].virt); + impa7_map[i].virt = NULL; } } } diff --git a/drivers/mtd/maps/intel_vr_nor.c b/drivers/mtd/maps/intel_vr_nor.c index b14053b2502..5ab71f0e1bc 100644 --- a/drivers/mtd/maps/intel_vr_nor.c +++ b/drivers/mtd/maps/intel_vr_nor.c @@ -31,7 +31,6 @@ #include <linux/kernel.h> #include <linux/slab.h> #include <linux/pci.h> -#include <linux/init.h> #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> #include <linux/mtd/partitions.h> @@ -82,9 +81,9 @@ static void vr_nor_destroy_mtd_setup(struct vr_nor_mtd *p) static int vr_nor_mtd_setup(struct vr_nor_mtd *p) { - static const char *probe_types[] = + static const char * const probe_types[] = { "cfi_probe", "jedec_probe", NULL }; - const char **type; + const char * const *type; for (type = probe_types; !p->info && *type; type++) p->info = do_map_probe(*type, &p->map); @@ -180,7 +179,6 @@ static void vr_nor_pci_remove(struct pci_dev *dev) { struct vr_nor_mtd *p = pci_get_drvdata(dev); - pci_set_drvdata(dev, NULL); vr_nor_destroy_partitions(p); vr_nor_destroy_mtd_setup(p); vr_nor_destroy_maps(p); diff --git a/drivers/mtd/maps/ixp2000.c b/drivers/mtd/maps/ixp2000.c deleted file mode 100644 index 4a41ced0f71..00000000000 --- a/drivers/mtd/maps/ixp2000.c +++ /dev/null @@ -1,253 +0,0 @@ -/* - * drivers/mtd/maps/ixp2000.c - * - * Mapping for the Intel XScale IXP2000 based systems - * - * Copyright (C) 2002 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com> - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/slab.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/platform_device.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/partitions.h> - -#include <asm/io.h> -#include <mach/hardware.h> -#include <asm/mach/flash.h> - -#include <linux/reboot.h> - -struct ixp2000_flash_info { - struct mtd_info *mtd; - struct map_info map; - struct resource *res; -}; - -static inline unsigned long flash_bank_setup(struct map_info *map, unsigned long ofs) -{ - unsigned long (*set_bank)(unsigned long) = - (unsigned long(*)(unsigned long))map->map_priv_2; - - return (set_bank ? set_bank(ofs) : ofs); -} - -#ifdef __ARMEB__ -/* - * Rev A0 and A1 of IXP2400 silicon have a broken addressing unit which - * causes the lower address bits to be XORed with 0x11 on 8 bit accesses - * and XORed with 0x10 on 16 bit accesses. See the spec update, erratum 44. - */ -static int erratum44_workaround = 0; - -static inline unsigned long address_fix8_write(unsigned long addr) -{ - if (erratum44_workaround) { - return (addr ^ 3); - } - return addr; -} -#else - -#define address_fix8_write(x) (x) -#endif - -static map_word ixp2000_flash_read8(struct map_info *map, unsigned long ofs) -{ - map_word val; - - val.x[0] = *((u8 *)(map->map_priv_1 + flash_bank_setup(map, ofs))); - return val; -} - -/* - * We can't use the standard memcpy due to the broken SlowPort - * address translation on rev A0 and A1 silicon and the fact that - * we have banked flash. - */ -static void ixp2000_flash_copy_from(struct map_info *map, void *to, - unsigned long from, ssize_t len) -{ - from = flash_bank_setup(map, from); - while(len--) - *(__u8 *) to++ = *(__u8 *)(map->map_priv_1 + from++); -} - -static void ixp2000_flash_write8(struct map_info *map, map_word d, unsigned long ofs) -{ - *(__u8 *) (address_fix8_write(map->map_priv_1 + - flash_bank_setup(map, ofs))) = d.x[0]; -} - -static void ixp2000_flash_copy_to(struct map_info *map, unsigned long to, - const void *from, ssize_t len) -{ - to = flash_bank_setup(map, to); - while(len--) { - unsigned long tmp = address_fix8_write(map->map_priv_1 + to++); - *(__u8 *)(tmp) = *(__u8 *)(from++); - } -} - - -static int ixp2000_flash_remove(struct platform_device *dev) -{ - struct flash_platform_data *plat = dev->dev.platform_data; - struct ixp2000_flash_info *info = platform_get_drvdata(dev); - - platform_set_drvdata(dev, NULL); - - if(!info) - return 0; - - if (info->mtd) { - mtd_device_unregister(info->mtd); - map_destroy(info->mtd); - } - if (info->map.map_priv_1) - iounmap((void *) info->map.map_priv_1); - - if (info->res) { - release_resource(info->res); - kfree(info->res); - } - - if (plat->exit) - plat->exit(); - - return 0; -} - - -static int ixp2000_flash_probe(struct platform_device *dev) -{ - static const char *probes[] = { "RedBoot", "cmdlinepart", NULL }; - struct ixp2000_flash_data *ixp_data = dev->dev.platform_data; - struct flash_platform_data *plat; - struct ixp2000_flash_info *info; - unsigned long window_size; - int err = -1; - - if (!ixp_data) - return -ENODEV; - - plat = ixp_data->platform_data; - if (!plat) - return -ENODEV; - - window_size = resource_size(dev->resource); - dev_info(&dev->dev, "Probe of IXP2000 flash(%d banks x %dMiB)\n", - ixp_data->nr_banks, ((u32)window_size >> 20)); - - if (plat->width != 1) { - dev_err(&dev->dev, "IXP2000 MTD map only supports 8-bit mode, asking for %d\n", - plat->width * 8); - return -EIO; - } - - info = kzalloc(sizeof(struct ixp2000_flash_info), GFP_KERNEL); - if(!info) { - err = -ENOMEM; - goto Error; - } - - platform_set_drvdata(dev, info); - - /* - * Tell the MTD layer we're not 1:1 mapped so that it does - * not attempt to do a direct access on us. - */ - info->map.phys = NO_XIP; - - info->map.size = ixp_data->nr_banks * window_size; - info->map.bankwidth = 1; - - /* - * map_priv_2 is used to store a ptr to the bank_setup routine - */ - info->map.map_priv_2 = (unsigned long) ixp_data->bank_setup; - - info->map.name = dev_name(&dev->dev); - info->map.read = ixp2000_flash_read8; - info->map.write = ixp2000_flash_write8; - info->map.copy_from = ixp2000_flash_copy_from; - info->map.copy_to = ixp2000_flash_copy_to; - - info->res = request_mem_region(dev->resource->start, - resource_size(dev->resource), - dev_name(&dev->dev)); - if (!info->res) { - dev_err(&dev->dev, "Could not reserve memory region\n"); - err = -ENOMEM; - goto Error; - } - - info->map.map_priv_1 = - (unsigned long)ioremap(dev->resource->start, - resource_size(dev->resource)); - if (!info->map.map_priv_1) { - dev_err(&dev->dev, "Failed to ioremap flash region\n"); - err = -EIO; - goto Error; - } - -#if defined(__ARMEB__) - /* - * Enable erratum 44 workaround for NPUs with broken slowport - */ - - erratum44_workaround = ixp2000_has_broken_slowport(); - dev_info(&dev->dev, "Erratum 44 workaround %s\n", - erratum44_workaround ? "enabled" : "disabled"); -#endif - - info->mtd = do_map_probe(plat->map_name, &info->map); - if (!info->mtd) { - dev_err(&dev->dev, "map_probe failed\n"); - err = -ENXIO; - goto Error; - } - info->mtd->owner = THIS_MODULE; - - err = mtd_device_parse_register(info->mtd, probes, NULL, NULL, 0); - if (err) - goto Error; - - return 0; - -Error: - ixp2000_flash_remove(dev); - return err; -} - -static struct platform_driver ixp2000_flash_driver = { - .probe = ixp2000_flash_probe, - .remove = ixp2000_flash_remove, - .driver = { - .name = "IXP2000-Flash", - .owner = THIS_MODULE, - }, -}; - -module_platform_driver(ixp2000_flash_driver); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Deepak Saxena <dsaxena@plexity.net>"); -MODULE_ALIAS("platform:IXP2000-Flash"); diff --git a/drivers/mtd/maps/ixp4xx.c b/drivers/mtd/maps/ixp4xx.c index e864fc6c58f..6a589f1e288 100644 --- a/drivers/mtd/maps/ixp4xx.c +++ b/drivers/mtd/maps/ixp4xx.c @@ -13,9 +13,9 @@ * */ +#include <linux/err.h> #include <linux/module.h> #include <linux/types.h> -#include <linux/init.h> #include <linux/kernel.h> #include <linux/string.h> #include <linux/slab.h> @@ -148,15 +148,13 @@ struct ixp4xx_flash_info { struct resource *res; }; -static const char *probes[] = { "RedBoot", "cmdlinepart", NULL }; +static const char * const probes[] = { "RedBoot", "cmdlinepart", NULL }; static int ixp4xx_flash_remove(struct platform_device *dev) { - struct flash_platform_data *plat = dev->dev.platform_data; + struct flash_platform_data *plat = dev_get_platdata(&dev->dev); struct ixp4xx_flash_info *info = platform_get_drvdata(dev); - platform_set_drvdata(dev, NULL); - if(!info) return 0; @@ -164,13 +162,6 @@ static int ixp4xx_flash_remove(struct platform_device *dev) mtd_device_unregister(info->mtd); map_destroy(info->mtd); } - if (info->map.virt) - iounmap(info->map.virt); - - if (info->res) { - release_resource(info->res); - kfree(info->res); - } if (plat->exit) plat->exit(); @@ -180,7 +171,7 @@ static int ixp4xx_flash_remove(struct platform_device *dev) static int ixp4xx_flash_probe(struct platform_device *dev) { - struct flash_platform_data *plat = dev->dev.platform_data; + struct flash_platform_data *plat = dev_get_platdata(&dev->dev); struct ixp4xx_flash_info *info; struct mtd_part_parser_data ppdata = { .origin = dev->resource->start, @@ -196,7 +187,8 @@ static int ixp4xx_flash_probe(struct platform_device *dev) return err; } - info = kzalloc(sizeof(struct ixp4xx_flash_info), GFP_KERNEL); + info = devm_kzalloc(&dev->dev, sizeof(struct ixp4xx_flash_info), + GFP_KERNEL); if(!info) { err = -ENOMEM; goto Error; @@ -222,20 +214,9 @@ static int ixp4xx_flash_probe(struct platform_device *dev) info->map.write = ixp4xx_probe_write16; info->map.copy_from = ixp4xx_copy_from; - info->res = request_mem_region(dev->resource->start, - resource_size(dev->resource), - "IXP4XXFlash"); - if (!info->res) { - printk(KERN_ERR "IXP4XXFlash: Could not reserve memory region\n"); - err = -ENOMEM; - goto Error; - } - - info->map.virt = ioremap(dev->resource->start, - resource_size(dev->resource)); - if (!info->map.virt) { - printk(KERN_ERR "IXP4XXFlash: Failed to ioremap region\n"); - err = -EIO; + info->map.virt = devm_ioremap_resource(&dev->dev, dev->resource); + if (IS_ERR(info->map.virt)) { + err = PTR_ERR(info->map.virt); goto Error; } diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c index 3c3c791eb96..7aa682cd4d7 100644 --- a/drivers/mtd/maps/lantiq-flash.c +++ b/drivers/mtd/maps/lantiq-flash.c @@ -7,12 +7,12 @@ * Copyright (C) 2010 John Crispin <blogic@openwrt.org> */ +#include <linux/err.h> #include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> #include <linux/io.h> #include <linux/slab.h> -#include <linux/init.h> #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> #include <linux/mtd/partitions.h> @@ -45,8 +45,7 @@ struct ltq_mtd { }; static const char ltq_map_name[] = "ltq_nor"; -static const char *ltq_probe_types[] = { - "cmdlinepart", "ofpart", NULL }; +static const char * const ltq_probe_types[] = { "cmdlinepart", "ofpart", NULL }; static map_word ltq_read16(struct map_info *map, unsigned long adr) @@ -123,25 +122,28 @@ ltq_mtd_probe(struct platform_device *pdev) return -ENODEV; } - ltq_mtd = kzalloc(sizeof(struct ltq_mtd), GFP_KERNEL); + ltq_mtd = devm_kzalloc(&pdev->dev, sizeof(struct ltq_mtd), GFP_KERNEL); + if (!ltq_mtd) + return -ENOMEM; + platform_set_drvdata(pdev, ltq_mtd); ltq_mtd->res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!ltq_mtd->res) { dev_err(&pdev->dev, "failed to get memory resource\n"); - err = -ENOENT; - goto err_out; + return -ENOENT; } - ltq_mtd->map = kzalloc(sizeof(struct map_info), GFP_KERNEL); + ltq_mtd->map = devm_kzalloc(&pdev->dev, sizeof(struct map_info), + GFP_KERNEL); + if (!ltq_mtd->map) + return -ENOMEM; + ltq_mtd->map->phys = ltq_mtd->res->start; ltq_mtd->map->size = resource_size(ltq_mtd->res); - ltq_mtd->map->virt = devm_request_and_ioremap(&pdev->dev, ltq_mtd->res); - if (!ltq_mtd->map->virt) { - dev_err(&pdev->dev, "failed to remap mem resource\n"); - err = -EBUSY; - goto err_out; - } + ltq_mtd->map->virt = devm_ioremap_resource(&pdev->dev, ltq_mtd->res); + if (IS_ERR(ltq_mtd->map->virt)) + return PTR_ERR(ltq_mtd->map->virt); ltq_mtd->map->name = ltq_map_name; ltq_mtd->map->bankwidth = 2; @@ -156,8 +158,7 @@ ltq_mtd_probe(struct platform_device *pdev) if (!ltq_mtd->mtd) { dev_err(&pdev->dev, "probing failed\n"); - err = -ENXIO; - goto err_free; + return -ENXIO; } ltq_mtd->mtd->owner = THIS_MODULE; @@ -178,10 +179,6 @@ ltq_mtd_probe(struct platform_device *pdev) err_destroy: map_destroy(ltq_mtd->mtd); -err_free: - kfree(ltq_mtd->map); -err_out: - kfree(ltq_mtd); return err; } @@ -190,13 +187,9 @@ ltq_mtd_remove(struct platform_device *pdev) { struct ltq_mtd *ltq_mtd = platform_get_drvdata(pdev); - if (ltq_mtd) { - if (ltq_mtd->mtd) { - mtd_device_unregister(ltq_mtd->mtd); - map_destroy(ltq_mtd->mtd); - } - kfree(ltq_mtd->map); - kfree(ltq_mtd); + if (ltq_mtd && ltq_mtd->mtd) { + mtd_device_unregister(ltq_mtd->mtd); + map_destroy(ltq_mtd->mtd); } return 0; } diff --git a/drivers/mtd/maps/latch-addr-flash.c b/drivers/mtd/maps/latch-addr-flash.c index ab0fead56b8..cadfbe05187 100644 --- a/drivers/mtd/maps/latch-addr-flash.c +++ b/drivers/mtd/maps/latch-addr-flash.c @@ -10,7 +10,6 @@ * kind, whether express or implied. */ -#include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/mtd/mtd.h> @@ -102,9 +101,8 @@ static int latch_addr_flash_remove(struct platform_device *dev) info = platform_get_drvdata(dev); if (info == NULL) return 0; - platform_set_drvdata(dev, NULL); - latch_addr_data = dev->dev.platform_data; + latch_addr_data = dev_get_platdata(&dev->dev); if (info->mtd != NULL) { mtd_device_unregister(info->mtd); @@ -135,7 +133,7 @@ static int latch_addr_flash_probe(struct platform_device *dev) int chipsel; int err; - latch_addr_data = dev->dev.platform_data; + latch_addr_data = dev_get_platdata(&dev->dev); if (latch_addr_data == NULL) return -ENODEV; diff --git a/drivers/mtd/maps/mbx860.c b/drivers/mtd/maps/mbx860.c deleted file mode 100644 index 93fa56c3300..00000000000 --- a/drivers/mtd/maps/mbx860.c +++ /dev/null @@ -1,98 +0,0 @@ -/* - * Handle mapping of the flash on MBX860 boards - * - * Author: Anton Todorov - * Copyright: (C) 2001 Emness Technology - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <asm/io.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/partitions.h> - - -#define WINDOW_ADDR 0xfe000000 -#define WINDOW_SIZE 0x00200000 - -/* Flash / Partition sizing */ -#define MAX_SIZE_KiB 8192 -#define BOOT_PARTITION_SIZE_KiB 512 -#define KERNEL_PARTITION_SIZE_KiB 5632 -#define APP_PARTITION_SIZE_KiB 2048 - -#define NUM_PARTITIONS 3 - -/* partition_info gives details on the logical partitions that the split the - * single flash device into. If the size if zero we use up to the end of the - * device. */ -static struct mtd_partition partition_info[]={ - { .name = "MBX flash BOOT partition", - .offset = 0, - .size = BOOT_PARTITION_SIZE_KiB*1024 }, - { .name = "MBX flash DATA partition", - .offset = BOOT_PARTITION_SIZE_KiB*1024, - .size = (KERNEL_PARTITION_SIZE_KiB)*1024 }, - { .name = "MBX flash APPLICATION partition", - .offset = (BOOT_PARTITION_SIZE_KiB+KERNEL_PARTITION_SIZE_KiB)*1024 } -}; - - -static struct mtd_info *mymtd; - -struct map_info mbx_map = { - .name = "MBX flash", - .size = WINDOW_SIZE, - .phys = WINDOW_ADDR, - .bankwidth = 4, -}; - -static int __init init_mbx(void) -{ - printk(KERN_NOTICE "Motorola MBX flash device: 0x%x at 0x%x\n", WINDOW_SIZE*4, WINDOW_ADDR); - mbx_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE * 4); - - if (!mbx_map.virt) { - printk("Failed to ioremap\n"); - return -EIO; - } - simple_map_init(&mbx_map); - - mymtd = do_map_probe("jedec_probe", &mbx_map); - if (mymtd) { - mymtd->owner = THIS_MODULE; - mtd_device_register(mymtd, NULL, 0); - mtd_device_register(mymtd, partition_info, NUM_PARTITIONS); - return 0; - } - - iounmap((void *)mbx_map.virt); - return -ENXIO; -} - -static void __exit cleanup_mbx(void) -{ - if (mymtd) { - mtd_device_unregister(mymtd); - map_destroy(mymtd); - } - if (mbx_map.virt) { - iounmap((void *)mbx_map.virt); - mbx_map.virt = 0; - } -} - -module_init(init_mbx); -module_exit(cleanup_mbx); - -MODULE_AUTHOR("Anton Todorov <a.todorov@emness.com>"); -MODULE_DESCRIPTION("MTD map driver for Motorola MBX860 board"); -MODULE_LICENSE("GPL"); diff --git a/drivers/mtd/maps/octagon-5066.c b/drivers/mtd/maps/octagon-5066.c deleted file mode 100644 index 807ac2a2e68..00000000000 --- a/drivers/mtd/maps/octagon-5066.c +++ /dev/null @@ -1,246 +0,0 @@ -/* ###################################################################### - - Octagon 5066 MTD Driver. - - The Octagon 5066 is a SBC based on AMD's 586-WB running at 133 MHZ. It - comes with a builtin AMD 29F016 flash chip and a socketed EEPROM that - is replacable by flash. Both units are mapped through a multiplexer - into a 32k memory window at 0xe8000. The control register for the - multiplexing unit is located at IO 0x208 with a bit map of - 0-5 Page Selection in 32k increments - 6-7 Device selection: - 00 SSD off - 01 SSD 0 (Socket) - 10 SSD 1 (Flash chip) - 11 undefined - - On each SSD, the first 128k is reserved for use by the bios - (actually it IS the bios..) This only matters if you are booting off the - flash, you must not put a file system starting there. - - The driver tries to do a detection algorithm to guess what sort of devices - are plugged into the sockets. - - ##################################################################### */ - -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/init.h> -#include <asm/io.h> - -#include <linux/mtd/map.h> -#include <linux/mtd/mtd.h> - -#define WINDOW_START 0xe8000 -#define WINDOW_LENGTH 0x8000 -#define WINDOW_SHIFT 27 -#define WINDOW_MASK 0x7FFF -#define PAGE_IO 0x208 - -static volatile char page_n_dev = 0; -static unsigned long iomapadr; -static DEFINE_SPINLOCK(oct5066_spin); - -/* - * We use map_priv_1 to identify which device we are. - */ - -static void __oct5066_page(struct map_info *map, __u8 byte) -{ - outb(byte,PAGE_IO); - page_n_dev = byte; -} - -static inline void oct5066_page(struct map_info *map, unsigned long ofs) -{ - __u8 byte = map->map_priv_1 | (ofs >> WINDOW_SHIFT); - - if (page_n_dev != byte) - __oct5066_page(map, byte); -} - - -static map_word oct5066_read8(struct map_info *map, unsigned long ofs) -{ - map_word ret; - spin_lock(&oct5066_spin); - oct5066_page(map, ofs); - ret.x[0] = readb(iomapadr + (ofs & WINDOW_MASK)); - spin_unlock(&oct5066_spin); - return ret; -} - -static void oct5066_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) -{ - while(len) { - unsigned long thislen = len; - if (len > (WINDOW_LENGTH - (from & WINDOW_MASK))) - thislen = WINDOW_LENGTH-(from & WINDOW_MASK); - - spin_lock(&oct5066_spin); - oct5066_page(map, from); - memcpy_fromio(to, iomapadr + from, thislen); - spin_unlock(&oct5066_spin); - to += thislen; - from += thislen; - len -= thislen; - } -} - -static void oct5066_write8(struct map_info *map, map_word d, unsigned long adr) -{ - spin_lock(&oct5066_spin); - oct5066_page(map, adr); - writeb(d.x[0], iomapadr + (adr & WINDOW_MASK)); - spin_unlock(&oct5066_spin); -} - -static void oct5066_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) -{ - while(len) { - unsigned long thislen = len; - if (len > (WINDOW_LENGTH - (to & WINDOW_MASK))) - thislen = WINDOW_LENGTH-(to & WINDOW_MASK); - - spin_lock(&oct5066_spin); - oct5066_page(map, to); - memcpy_toio(iomapadr + to, from, thislen); - spin_unlock(&oct5066_spin); - to += thislen; - from += thislen; - len -= thislen; - } -} - -static struct map_info oct5066_map[2] = { - { - .name = "Octagon 5066 Socket", - .phys = NO_XIP, - .size = 512 * 1024, - .bankwidth = 1, - .read = oct5066_read8, - .copy_from = oct5066_copy_from, - .write = oct5066_write8, - .copy_to = oct5066_copy_to, - .map_priv_1 = 1<<6 - }, - { - .name = "Octagon 5066 Internal Flash", - .phys = NO_XIP, - .size = 2 * 1024 * 1024, - .bankwidth = 1, - .read = oct5066_read8, - .copy_from = oct5066_copy_from, - .write = oct5066_write8, - .copy_to = oct5066_copy_to, - .map_priv_1 = 2<<6 - } -}; - -static struct mtd_info *oct5066_mtd[2] = {NULL, NULL}; - -// OctProbe - Sense if this is an octagon card -// --------------------------------------------------------------------- -/* Perform a simple validity test, we map the window select SSD0 and - change pages while monitoring the window. A change in the window, - controlled by the PAGE_IO port is a functioning 5066 board. This will - fail if the thing in the socket is set to a uniform value. */ -static int __init OctProbe(void) -{ - unsigned int Base = (1 << 6); - unsigned long I; - unsigned long Values[10]; - for (I = 0; I != 20; I++) - { - outb(Base + (I%10),PAGE_IO); - if (I < 10) - { - // Record the value and check for uniqueness - Values[I%10] = readl(iomapadr); - if (I > 0 && Values[I%10] == Values[0]) - return -EAGAIN; - } - else - { - // Make sure we get the same values on the second pass - if (Values[I%10] != readl(iomapadr)) - return -EAGAIN; - } - } - return 0; -} - -void cleanup_oct5066(void) -{ - int i; - for (i=0; i<2; i++) { - if (oct5066_mtd[i]) { - mtd_device_unregister(oct5066_mtd[i]); - map_destroy(oct5066_mtd[i]); - } - } - iounmap((void *)iomapadr); - release_region(PAGE_IO, 1); -} - -static int __init init_oct5066(void) -{ - int i; - int ret = 0; - - // Do an autoprobe sequence - if (!request_region(PAGE_IO,1,"Octagon SSD")) { - printk(KERN_NOTICE "5066: Page Register in Use\n"); - return -EAGAIN; - } - iomapadr = (unsigned long)ioremap(WINDOW_START, WINDOW_LENGTH); - if (!iomapadr) { - printk(KERN_NOTICE "Failed to ioremap memory region\n"); - ret = -EIO; - goto out_rel; - } - if (OctProbe() != 0) { - printk(KERN_NOTICE "5066: Octagon Probe Failed, is this an Octagon 5066 SBC?\n"); - iounmap((void *)iomapadr); - ret = -EAGAIN; - goto out_unmap; - } - - // Print out our little header.. - printk("Octagon 5066 SSD IO:0x%x MEM:0x%x-0x%x\n",PAGE_IO,WINDOW_START, - WINDOW_START+WINDOW_LENGTH); - - for (i=0; i<2; i++) { - oct5066_mtd[i] = do_map_probe("cfi_probe", &oct5066_map[i]); - if (!oct5066_mtd[i]) - oct5066_mtd[i] = do_map_probe("jedec", &oct5066_map[i]); - if (!oct5066_mtd[i]) - oct5066_mtd[i] = do_map_probe("map_ram", &oct5066_map[i]); - if (!oct5066_mtd[i]) - oct5066_mtd[i] = do_map_probe("map_rom", &oct5066_map[i]); - if (oct5066_mtd[i]) { - oct5066_mtd[i]->owner = THIS_MODULE; - mtd_device_register(oct5066_mtd[i], NULL, 0); - } - } - - if (!oct5066_mtd[0] && !oct5066_mtd[1]) { - cleanup_oct5066(); - return -ENXIO; - } - - return 0; - - out_unmap: - iounmap((void *)iomapadr); - out_rel: - release_region(PAGE_IO, 1); - return ret; -} - -module_init(init_oct5066); -module_exit(cleanup_oct5066); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Jason Gunthorpe <jgg@deltatee.com>, David Woodhouse <dwmw2@infradead.org>"); -MODULE_DESCRIPTION("MTD map driver for Octagon 5066 Single Board Computer"); diff --git a/drivers/mtd/maps/pci.c b/drivers/mtd/maps/pci.c index c3aebd5da5d..eb0242e0b2d 100644 --- a/drivers/mtd/maps/pci.c +++ b/drivers/mtd/maps/pci.c @@ -14,7 +14,6 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/pci.h> -#include <linux/init.h> #include <linux/slab.h> #include <linux/mtd/mtd.h> @@ -283,8 +282,7 @@ static int mtd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) if (err) goto release; - /* tsk - do_map_probe should take const char * */ - mtd = do_map_probe((char *)info->map_name, &map->map); + mtd = do_map_probe(info->map_name, &map->map); err = -ENODEV; if (!mtd) goto release; @@ -317,7 +315,6 @@ static void mtd_pci_remove(struct pci_dev *dev) map->exit(dev, map); kfree(map); - pci_set_drvdata(dev, NULL); pci_release_regions(dev); } diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c index 21b0b713cac..f73cd461257 100644 --- a/drivers/mtd/maps/physmap.c +++ b/drivers/mtd/maps/physmap.c @@ -40,9 +40,8 @@ static int physmap_flash_remove(struct platform_device *dev) info = platform_get_drvdata(dev); if (info == NULL) return 0; - platform_set_drvdata(dev, NULL); - physmap_data = dev->dev.platform_data; + physmap_data = dev_get_platdata(&dev->dev); if (info->cmtd) { mtd_device_unregister(info->cmtd); @@ -69,7 +68,7 @@ static void physmap_set_vpp(struct map_info *map, int state) unsigned long flags; pdev = (struct platform_device *)map->map_priv_1; - physmap_data = pdev->dev.platform_data; + physmap_data = dev_get_platdata(&pdev->dev); if (!physmap_data->set_vpp) return; @@ -87,26 +86,23 @@ static void physmap_set_vpp(struct map_info *map, int state) spin_unlock_irqrestore(&info->vpp_lock, flags); } -static const char *rom_probe_types[] = { - "cfi_probe", - "jedec_probe", - "qinfo_probe", - "map_rom", - NULL }; -static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "afs", - NULL }; +static const char * const rom_probe_types[] = { + "cfi_probe", "jedec_probe", "qinfo_probe", "map_rom", NULL }; + +static const char * const part_probe_types[] = { + "cmdlinepart", "RedBoot", "afs", NULL }; static int physmap_flash_probe(struct platform_device *dev) { struct physmap_flash_data *physmap_data; struct physmap_flash_info *info; - const char **probe_type; - const char **part_types; + const char * const *probe_type; + const char * const *part_types; int err = 0; int i; int devices_found = 0; - physmap_data = dev->dev.platform_data; + physmap_data = dev_get_platdata(&dev->dev); if (physmap_data == NULL) return -ENODEV; diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c index 67cc73c18dd..217c25d7381 100644 --- a/drivers/mtd/maps/physmap_of.c +++ b/drivers/mtd/maps/physmap_of.c @@ -15,7 +15,6 @@ #include <linux/module.h> #include <linux/types.h> -#include <linux/init.h> #include <linux/device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> @@ -68,12 +67,12 @@ static int of_flash_remove(struct platform_device *dev) kfree(info->list[i].res); } } - - kfree(info); - return 0; } +static const char * const rom_probe_types[] = { + "cfi_probe", "jedec_probe", "map_rom" }; + /* Helper function to handle probing of the obsolete "direct-mapped" * compatible binding, which has an extra "probe-type" property * describing the type of flash probe necessary. */ @@ -83,8 +82,6 @@ static struct mtd_info *obsolete_probe(struct platform_device *dev, struct device_node *dp = dev->dev.of_node; const char *of_probe; struct mtd_info *mtd; - static const char *rom_probe_types[] - = { "cfi_probe", "jedec_probe", "map_rom"}; int i; dev_warn(&dev->dev, "Device tree uses obsolete \"direct-mapped\" " @@ -114,9 +111,10 @@ static struct mtd_info *obsolete_probe(struct platform_device *dev, specifies the list of partition probers to use. If none is given then the default is use. These take precedence over other device tree information. */ -static const char *part_probe_types_def[] = { "cmdlinepart", "RedBoot", - "ofpart", "ofoldpart", NULL }; -static const char **of_get_probes(struct device_node *dp) +static const char * const part_probe_types_def[] = { + "cmdlinepart", "RedBoot", "ofpart", "ofoldpart", NULL }; + +static const char * const *of_get_probes(struct device_node *dp) { const char *cp; int cplen; @@ -145,7 +143,7 @@ static const char **of_get_probes(struct device_node *dp) return res; } -static void of_free_probes(const char **probes) +static void of_free_probes(const char * const *probes) { if (probes != part_probe_types_def) kfree(probes); @@ -154,7 +152,7 @@ static void of_free_probes(const char **probes) static struct of_device_id of_flash_match[]; static int of_flash_probe(struct platform_device *dev) { - const char **part_probe_types; + const char * const *part_probe_types; const struct of_device_id *match; struct device_node *dp = dev->dev.of_node; struct resource res; @@ -170,7 +168,7 @@ static int of_flash_probe(struct platform_device *dev) resource_size_t res_size; struct mtd_part_parser_data ppdata; bool map_indirect; - const char *mtd_name; + const char *mtd_name = NULL; match = of_match_device(of_flash_match, &dev->dev); if (!match) @@ -199,8 +197,9 @@ static int of_flash_probe(struct platform_device *dev) map_indirect = of_property_read_bool(dp, "no-unaligned-direct-access"); err = -ENOMEM; - info = kzalloc(sizeof(struct of_flash) + - sizeof(struct of_flash_list) * count, GFP_KERNEL); + info = devm_kzalloc(&dev->dev, + sizeof(struct of_flash) + + sizeof(struct of_flash_list) * count, GFP_KERNEL); if (!info) goto err_flash_remove; @@ -241,6 +240,7 @@ static int of_flash_probe(struct platform_device *dev) info->list[i].map.phys = res.start; info->list[i].map.size = res_size; info->list[i].map.bankwidth = be32_to_cpup(width); + info->list[i].map.device_node = dp; err = -ENOMEM; info->list[i].map.virt = ioremap(info->list[i].map.phys, diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c index 2de66b062f0..d597e89f269 100644 --- a/drivers/mtd/maps/plat-ram.c +++ b/drivers/mtd/maps/plat-ram.c @@ -23,7 +23,6 @@ #include <linux/module.h> #include <linux/types.h> -#include <linux/init.h> #include <linux/kernel.h> #include <linux/string.h> #include <linux/ioport.h> @@ -55,7 +54,7 @@ struct platram_info { static inline struct platram_info *to_platram_info(struct platform_device *dev) { - return (struct platram_info *)platform_get_drvdata(dev); + return platform_get_drvdata(dev); } /* platram_setrw @@ -84,8 +83,6 @@ static int platram_remove(struct platform_device *pdev) { struct platram_info *info = to_platram_info(pdev); - platform_set_drvdata(pdev, NULL); - dev_dbg(&pdev->dev, "removing device\n"); if (info == NULL) @@ -130,17 +127,16 @@ static int platram_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "probe entered\n"); - if (pdev->dev.platform_data == NULL) { + if (dev_get_platdata(&pdev->dev) == NULL) { dev_err(&pdev->dev, "no platform data supplied\n"); err = -ENOENT; goto exit_error; } - pdata = pdev->dev.platform_data; + pdata = dev_get_platdata(&pdev->dev); info = kzalloc(sizeof(*info), GFP_KERNEL); if (info == NULL) { - dev_err(&pdev->dev, "no memory for flash info\n"); err = -ENOMEM; goto exit_error; } @@ -199,7 +195,7 @@ static int platram_probe(struct platform_device *pdev) * supplied by the platform_data struct */ if (pdata->map_probes) { - const char **map_probes = pdata->map_probes; + const char * const *map_probes = pdata->map_probes; for ( ; !info->mtd && *map_probes; map_probes++) info->mtd = do_map_probe(*map_probes , &info->map); @@ -259,21 +255,7 @@ static struct platform_driver platram_driver = { }, }; -/* module init/exit */ - -static int __init platram_init(void) -{ - printk("Generic platform RAM MTD, (c) 2004 Simtec Electronics\n"); - return platform_driver_register(&platram_driver); -} - -static void __exit platram_exit(void) -{ - platform_driver_unregister(&platram_driver); -} - -module_init(platram_init); -module_exit(platram_exit); +module_platform_driver(platram_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c index 43e3dbb976d..cb4d92eea9f 100644 --- a/drivers/mtd/maps/pxa2xx-flash.c +++ b/drivers/mtd/maps/pxa2xx-flash.c @@ -13,7 +13,6 @@ #include <linux/types.h> #include <linux/slab.h> #include <linux/kernel.h> -#include <linux/init.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> @@ -45,13 +44,11 @@ struct pxa2xx_flash_info { struct map_info map; }; - -static const char *probes[] = { "RedBoot", "cmdlinepart", NULL }; - +static const char * const probes[] = { "RedBoot", "cmdlinepart", NULL }; static int pxa2xx_flash_probe(struct platform_device *pdev) { - struct flash_platform_data *flash = pdev->dev.platform_data; + struct flash_platform_data *flash = dev_get_platdata(&pdev->dev); struct pxa2xx_flash_info *info; struct resource *res; @@ -63,7 +60,7 @@ static int pxa2xx_flash_probe(struct platform_device *pdev) if (!info) return -ENOMEM; - info->map.name = (char *) flash->name; + info->map.name = flash->name; info->map.bankwidth = flash->width; info->map.phys = res->start; info->map.size = resource_size(res); @@ -75,7 +72,7 @@ static int pxa2xx_flash_probe(struct platform_device *pdev) return -ENOMEM; } info->map.cached = - ioremap_cached(info->map.phys, info->map.size); + ioremap_cache(info->map.phys, info->map.size); if (!info->map.cached) printk(KERN_WARNING "Failed to ioremap cached %s\n", info->map.name); @@ -109,8 +106,6 @@ static int pxa2xx_flash_remove(struct platform_device *dev) { struct pxa2xx_flash_info *info = platform_get_drvdata(dev); - platform_set_drvdata(dev, NULL); - mtd_device_unregister(info->mtd); map_destroy(info->mtd); diff --git a/drivers/mtd/maps/rbtx4939-flash.c b/drivers/mtd/maps/rbtx4939-flash.c index 49c3fe715ee..146b6047ed2 100644 --- a/drivers/mtd/maps/rbtx4939-flash.c +++ b/drivers/mtd/maps/rbtx4939-flash.c @@ -13,7 +13,6 @@ #include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> -#include <linux/init.h> #include <linux/slab.h> #include <linux/device.h> #include <linux/platform_device.h> @@ -34,10 +33,9 @@ static int rbtx4939_flash_remove(struct platform_device *dev) info = platform_get_drvdata(dev); if (!info) return 0; - platform_set_drvdata(dev, NULL); if (info->mtd) { - struct rbtx4939_flash_data *pdata = dev->dev.platform_data; + struct rbtx4939_flash_data *pdata = dev_get_platdata(&dev->dev); mtd_device_unregister(info->mtd); map_destroy(info->mtd); @@ -45,18 +43,19 @@ static int rbtx4939_flash_remove(struct platform_device *dev) return 0; } -static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL }; +static const char * const rom_probe_types[] = { + "cfi_probe", "jedec_probe", NULL }; static int rbtx4939_flash_probe(struct platform_device *dev) { struct rbtx4939_flash_data *pdata; struct rbtx4939_flash_info *info; struct resource *res; - const char **probe_type; + const char * const *probe_type; int err = 0; unsigned long size; - pdata = dev->dev.platform_data; + pdata = dev_get_platdata(&dev->dev); if (!pdata) return -ENODEV; diff --git a/drivers/mtd/maps/rpxlite.c b/drivers/mtd/maps/rpxlite.c deleted file mode 100644 index ed88225bf66..00000000000 --- a/drivers/mtd/maps/rpxlite.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Handle mapping of the flash on the RPX Lite and CLLF boards - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <asm/io.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> - - -#define WINDOW_ADDR 0xfe000000 -#define WINDOW_SIZE 0x800000 - -static struct mtd_info *mymtd; - -static struct map_info rpxlite_map = { - .name = "RPX", - .size = WINDOW_SIZE, - .bankwidth = 4, - .phys = WINDOW_ADDR, -}; - -static int __init init_rpxlite(void) -{ - printk(KERN_NOTICE "RPX Lite or CLLF flash device: %x at %x\n", WINDOW_SIZE*4, WINDOW_ADDR); - rpxlite_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE * 4); - - if (!rpxlite_map.virt) { - printk("Failed to ioremap\n"); - return -EIO; - } - simple_map_init(&rpxlite_map); - mymtd = do_map_probe("cfi_probe", &rpxlite_map); - if (mymtd) { - mymtd->owner = THIS_MODULE; - mtd_device_register(mymtd, NULL, 0); - return 0; - } - - iounmap((void *)rpxlite_map.virt); - return -ENXIO; -} - -static void __exit cleanup_rpxlite(void) -{ - if (mymtd) { - mtd_device_unregister(mymtd); - map_destroy(mymtd); - } - if (rpxlite_map.virt) { - iounmap((void *)rpxlite_map.virt); - rpxlite_map.virt = 0; - } -} - -module_init(init_rpxlite); -module_exit(cleanup_rpxlite); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Arnold Christensen <AKC@pel.dk>"); -MODULE_DESCRIPTION("MTD map driver for RPX Lite and CLLF boards"); diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index f694417cf7e..8fc06bf111c 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c @@ -244,11 +244,11 @@ static struct sa_info *sa1100_setup_mtd(struct platform_device *pdev, return ERR_PTR(ret); } -static const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL }; +static const char * const part_probes[] = { "cmdlinepart", "RedBoot", NULL }; static int sa1100_mtd_probe(struct platform_device *pdev) { - struct flash_platform_data *plat = pdev->dev.platform_data; + struct flash_platform_data *plat = dev_get_platdata(&pdev->dev); struct sa_info *info; int err; @@ -277,9 +277,8 @@ static int sa1100_mtd_probe(struct platform_device *pdev) static int __exit sa1100_mtd_remove(struct platform_device *pdev) { struct sa_info *info = platform_get_drvdata(pdev); - struct flash_platform_data *plat = pdev->dev.platform_data; + struct flash_platform_data *plat = dev_get_platdata(&pdev->dev); - platform_set_drvdata(pdev, NULL); sa1100_destroy(info, plat); return 0; diff --git a/drivers/mtd/maps/sc520cdp.c b/drivers/mtd/maps/sc520cdp.c index 8fead8e46bc..093edd51bdc 100644 --- a/drivers/mtd/maps/sc520cdp.c +++ b/drivers/mtd/maps/sc520cdp.c @@ -183,7 +183,7 @@ static const struct sc520_par_table par_table[NUM_FLASH_BANKS] = static void sc520cdp_setup_par(void) { - volatile unsigned long __iomem *mmcr; + unsigned long __iomem *mmcr; unsigned long mmcr_val; int i, j; @@ -203,11 +203,11 @@ static void sc520cdp_setup_par(void) */ for(i = 0; i < NUM_FLASH_BANKS; i++) { /* for each par_table entry */ for(j = 0; j < NUM_SC520_PAR; j++) { /* for each PAR register */ - mmcr_val = mmcr[SC520_PAR(j)]; + mmcr_val = readl(&mmcr[SC520_PAR(j)]); /* if target device field matches, reprogram the PAR */ if((mmcr_val & SC520_PAR_TRGDEV) == par_table[i].trgdev) { - mmcr[SC520_PAR(j)] = par_table[i].new_par; + writel(par_table[i].new_par, &mmcr[SC520_PAR(j)]); break; } } diff --git a/drivers/mtd/maps/scb2_flash.c b/drivers/mtd/maps/scb2_flash.c index c77b68c9412..b7a22a612a4 100644 --- a/drivers/mtd/maps/scb2_flash.c +++ b/drivers/mtd/maps/scb2_flash.c @@ -47,7 +47,6 @@ #include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> -#include <linux/init.h> #include <asm/io.h> #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> @@ -212,7 +211,6 @@ static void scb2_flash_remove(struct pci_dev *dev) if (!region_fail) release_mem_region(SCB2_ADDR, SCB2_WINDOW); - pci_set_drvdata(dev, NULL); } static struct pci_device_id scb2_flash_pci_ids[] = { diff --git a/drivers/mtd/maps/solutionengine.c b/drivers/mtd/maps/solutionengine.c index 9d900ada670..bb580bc1644 100644 --- a/drivers/mtd/maps/solutionengine.c +++ b/drivers/mtd/maps/solutionengine.c @@ -31,29 +31,7 @@ struct map_info soleng_flash_map = { .bankwidth = 4, }; -static const char *probes[] = { "RedBoot", "cmdlinepart", NULL }; - -#ifdef CONFIG_MTD_SUPERH_RESERVE -static struct mtd_partition superh_se_partitions[] = { - /* Reserved for boot code, read-only */ - { - .name = "flash_boot", - .offset = 0x00000000, - .size = CONFIG_MTD_SUPERH_RESERVE, - .mask_flags = MTD_WRITEABLE, - }, - /* All else is writable (e.g. JFFS) */ - { - .name = "Flash FS", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - } -}; -#define NUM_PARTITIONS ARRAY_SIZE(superh_se_partitions) -#else -#define superh_se_partitions NULL -#define NUM_PARTITIONS 0 -#endif /* CONFIG_MTD_SUPERH_RESERVE */ +static const char * const probes[] = { "RedBoot", "cmdlinepart", NULL }; static int __init init_soleng_maps(void) { @@ -92,8 +70,7 @@ static int __init init_soleng_maps(void) mtd_device_register(eprom_mtd, NULL, 0); } - mtd_device_parse_register(flash_mtd, probes, NULL, - superh_se_partitions, NUM_PARTITIONS); + mtd_device_parse_register(flash_mtd, probes, NULL, NULL, 0); return 0; } diff --git a/drivers/mtd/maps/sun_uflash.c b/drivers/mtd/maps/sun_uflash.c index d467f3b11c9..b6f1aac3510 100644 --- a/drivers/mtd/maps/sun_uflash.c +++ b/drivers/mtd/maps/sun_uflash.c @@ -11,7 +11,6 @@ #include <linux/module.h> #include <linux/fs.h> #include <linux/errno.h> -#include <linux/init.h> #include <linux/ioport.h> #include <linux/of.h> #include <linux/of_device.h> @@ -75,7 +74,7 @@ int uflash_devinit(struct platform_device *op, struct device_node *dp) up->name = of_get_property(dp, "model", NULL); if (up->name && 0 < strlen(up->name)) - up->map.name = (char *)up->name; + up->map.name = up->name; up->map.phys = op->resource[0].start; diff --git a/drivers/mtd/maps/tqm8xxl.c b/drivers/mtd/maps/tqm8xxl.c deleted file mode 100644 index d78587990e7..00000000000 --- a/drivers/mtd/maps/tqm8xxl.c +++ /dev/null @@ -1,249 +0,0 @@ -/* - * Handle mapping of the flash memory access routines - * on TQM8xxL based devices. - * - * based on rpxlite.c - * - * Copyright(C) 2001 Kirk Lee <kirk@hpc.ee.ntu.edu.tw> - * - * This code is GPLed - * - */ - -/* - * According to TQM8xxL hardware manual, TQM8xxL series have - * following flash memory organisations: - * | capacity | | chip type | | bank0 | | bank1 | - * 2MiB 512Kx16 2MiB 0 - * 4MiB 1Mx16 4MiB 0 - * 8MiB 1Mx16 4MiB 4MiB - * Thus, we choose CONFIG_MTD_CFI_I2 & CONFIG_MTD_CFI_B4 at - * kernel configuration. - */ -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/slab.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/partitions.h> - -#include <asm/io.h> - -#define FLASH_ADDR 0x40000000 -#define FLASH_SIZE 0x00800000 -#define FLASH_BANK_MAX 4 - -// trivial struct to describe partition information -struct mtd_part_def -{ - int nums; - unsigned char *type; - struct mtd_partition* mtd_part; -}; - -//static struct mtd_info *mymtd; -static struct mtd_info* mtd_banks[FLASH_BANK_MAX]; -static struct map_info* map_banks[FLASH_BANK_MAX]; -static struct mtd_part_def part_banks[FLASH_BANK_MAX]; -static unsigned long num_banks; -static void __iomem *start_scan_addr; - -/* - * Here are partition information for all known TQM8xxL series devices. - * See include/linux/mtd/partitions.h for definition of the mtd_partition - * structure. - * - * The *_max_flash_size is the maximum possible mapped flash size which - * is not necessarily the actual flash size. It must correspond to the - * value specified in the mapping definition defined by the - * "struct map_desc *_io_desc" for the corresponding machine. - */ - -/* Currently, TQM8xxL has up to 8MiB flash */ -static unsigned long tqm8xxl_max_flash_size = 0x00800000; - -/* partition definition for first flash bank - * (cf. "drivers/char/flash_config.c") - */ -static struct mtd_partition tqm8xxl_partitions[] = { - { - .name = "ppcboot", - .offset = 0x00000000, - .size = 0x00020000, /* 128KB */ - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "kernel", /* default kernel image */ - .offset = 0x00020000, - .size = 0x000e0000, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "user", - .offset = 0x00100000, - .size = 0x00100000, - }, - { - .name = "initrd", - .offset = 0x00200000, - .size = 0x00200000, - } -}; -/* partition definition for second flash bank */ -static struct mtd_partition tqm8xxl_fs_partitions[] = { - { - .name = "cramfs", - .offset = 0x00000000, - .size = 0x00200000, - }, - { - .name = "jffs", - .offset = 0x00200000, - .size = 0x00200000, - //.size = MTDPART_SIZ_FULL, - } -}; - -static int __init init_tqm_mtd(void) -{ - int idx = 0, ret = 0; - unsigned long flash_addr, flash_size, mtd_size = 0; - /* pointer to TQM8xxL board info data */ - bd_t *bd = (bd_t *)__res; - - flash_addr = bd->bi_flashstart; - flash_size = bd->bi_flashsize; - - //request maximum flash size address space - start_scan_addr = ioremap(flash_addr, flash_size); - if (!start_scan_addr) { - printk(KERN_WARNING "%s:Failed to ioremap address:0x%x\n", __func__, flash_addr); - return -EIO; - } - - for (idx = 0 ; idx < FLASH_BANK_MAX ; idx++) { - if(mtd_size >= flash_size) - break; - - printk(KERN_INFO "%s: chip probing count %d\n", __func__, idx); - - map_banks[idx] = kzalloc(sizeof(struct map_info), GFP_KERNEL); - if(map_banks[idx] == NULL) { - ret = -ENOMEM; - /* FIXME: What if some MTD devices were probed already? */ - goto error_mem; - } - - map_banks[idx]->name = kmalloc(16, GFP_KERNEL); - - if (!map_banks[idx]->name) { - ret = -ENOMEM; - /* FIXME: What if some MTD devices were probed already? */ - goto error_mem; - } - sprintf(map_banks[idx]->name, "TQM8xxL%d", idx); - - map_banks[idx]->size = flash_size; - map_banks[idx]->bankwidth = 4; - - simple_map_init(map_banks[idx]); - - map_banks[idx]->virt = start_scan_addr; - map_banks[idx]->phys = flash_addr; - /* FIXME: This looks utterly bogus, but I'm trying to - preserve the behaviour of the original (shown here)... - - map_banks[idx]->map_priv_1 = - start_scan_addr + ((idx > 0) ? - (mtd_banks[idx-1] ? mtd_banks[idx-1]->size : 0) : 0); - */ - - if (idx && mtd_banks[idx-1]) { - map_banks[idx]->virt += mtd_banks[idx-1]->size; - map_banks[idx]->phys += mtd_banks[idx-1]->size; - } - - //start to probe flash chips - mtd_banks[idx] = do_map_probe("cfi_probe", map_banks[idx]); - - if (mtd_banks[idx]) { - mtd_banks[idx]->owner = THIS_MODULE; - mtd_size += mtd_banks[idx]->size; - num_banks++; - - printk(KERN_INFO "%s: bank%d, name:%s, size:%dbytes \n", __func__, num_banks, - mtd_banks[idx]->name, mtd_banks[idx]->size); - } - } - - /* no supported flash chips found */ - if (!num_banks) { - printk(KERN_NOTICE "TQM8xxL: No support flash chips found!\n"); - ret = -ENXIO; - goto error_mem; - } - - /* - * Select Static partition definitions - */ - part_banks[0].mtd_part = tqm8xxl_partitions; - part_banks[0].type = "Static image"; - part_banks[0].nums = ARRAY_SIZE(tqm8xxl_partitions); - - part_banks[1].mtd_part = tqm8xxl_fs_partitions; - part_banks[1].type = "Static file system"; - part_banks[1].nums = ARRAY_SIZE(tqm8xxl_fs_partitions); - - for(idx = 0; idx < num_banks ; idx++) { - if (part_banks[idx].nums == 0) - printk(KERN_NOTICE "TQM flash%d: no partition info available, registering whole flash at once\n", idx); - else - printk(KERN_NOTICE "TQM flash%d: Using %s partition definition\n", - idx, part_banks[idx].type); - mtd_device_register(mtd_banks[idx], part_banks[idx].mtd_part, - part_banks[idx].nums); - } - return 0; -error_mem: - for(idx = 0 ; idx < FLASH_BANK_MAX ; idx++) { - if(map_banks[idx] != NULL) { - kfree(map_banks[idx]->name); - map_banks[idx]->name = NULL; - kfree(map_banks[idx]); - map_banks[idx] = NULL; - } - } -error: - iounmap(start_scan_addr); - return ret; -} - -static void __exit cleanup_tqm_mtd(void) -{ - unsigned int idx = 0; - for(idx = 0 ; idx < num_banks ; idx++) { - /* destroy mtd_info previously allocated */ - if (mtd_banks[idx]) { - mtd_device_unregister(mtd_banks[idx]); - map_destroy(mtd_banks[idx]); - } - /* release map_info not used anymore */ - kfree(map_banks[idx]->name); - kfree(map_banks[idx]); - } - - if (start_scan_addr) { - iounmap(start_scan_addr); - start_scan_addr = 0; - } -} - -module_init(init_tqm_mtd); -module_exit(cleanup_tqm_mtd); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Kirk Lee <kirk@hpc.ee.ntu.edu.tw>"); -MODULE_DESCRIPTION("MTD map driver for TQM8xxL boards"); diff --git a/drivers/mtd/maps/tsunami_flash.c b/drivers/mtd/maps/tsunami_flash.c index 1de390e1c2f..da2cdb5fd6d 100644 --- a/drivers/mtd/maps/tsunami_flash.c +++ b/drivers/mtd/maps/tsunami_flash.c @@ -82,11 +82,12 @@ static void __exit cleanup_tsunami_flash(void) tsunami_flash_mtd = 0; } +static const char * const rom_probe_types[] = { + "cfi_probe", "jedec_probe", "map_rom", NULL }; static int __init init_tsunami_flash(void) { - static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", "map_rom", NULL }; - char **type; + const char * const *type; tsunami_tig_writeb(FLASH_ENABLE_BYTE, FLASH_ENABLE_PORT); diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c index 299bf88a6f4..c1af83db520 100644 --- a/drivers/mtd/maps/uclinux.c +++ b/drivers/mtd/maps/uclinux.c @@ -23,12 +23,26 @@ /****************************************************************************/ +#ifdef CONFIG_MTD_ROM +#define MAP_NAME "rom" +#else +#define MAP_NAME "ram" +#endif + +/* + * Blackfin uses uclinux_ram_map during startup, so it must not be static. + * Provide a dummy declaration to make sparse happy. + */ +extern struct map_info uclinux_ram_map; + struct map_info uclinux_ram_map = { - .name = "RAM", - .phys = (unsigned long)__bss_stop, + .name = MAP_NAME, .size = 0, }; +static unsigned long physaddr = -1; +module_param(physaddr, ulong, S_IRUGO); + static struct mtd_info *uclinux_ram_mtdinfo; /****************************************************************************/ @@ -60,11 +74,17 @@ static int __init uclinux_mtd_init(void) struct map_info *mapp; mapp = &uclinux_ram_map; + + if (physaddr == -1) + mapp->phys = (resource_size_t)__bss_stop; + else + mapp->phys = physaddr; + if (!mapp->size) mapp->size = PAGE_ALIGN(ntohl(*((unsigned long *)(mapp->phys + 8)))); mapp->bankwidth = 4; - printk("uclinux[mtd]: RAM probe address=0x%x size=0x%x\n", + printk("uclinux[mtd]: probe address=0x%x size=0x%x\n", (int) mapp->phys, (int) mapp->size); /* @@ -82,7 +102,7 @@ static int __init uclinux_mtd_init(void) simple_map_init(mapp); - mtd = do_map_probe("map_ram", mapp); + mtd = do_map_probe("map_" MAP_NAME, mapp); if (!mtd) { printk("uclinux[mtd]: failed to find a mapping?\n"); return(-ENXIO); @@ -118,6 +138,6 @@ module_exit(uclinux_mtd_cleanup); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Greg Ungerer <gerg@snapgear.com>"); -MODULE_DESCRIPTION("Generic RAM based MTD for uClinux"); +MODULE_DESCRIPTION("Generic MTD for uClinux"); /****************************************************************************/ diff --git a/drivers/mtd/maps/vmax301.c b/drivers/mtd/maps/vmax301.c deleted file mode 100644 index 5e68de73eab..00000000000 --- a/drivers/mtd/maps/vmax301.c +++ /dev/null @@ -1,196 +0,0 @@ -/* ###################################################################### - - Tempustech VMAX SBC301 MTD Driver. - - The VMAx 301 is a SBC based on . It - comes with three builtin AMD 29F016B flash chips and a socket for SRAM or - more flash. Each unit has it's own 8k mapping into a settable region - (0xD8000). There are two 8k mappings for each MTD, the first is always set - to the lower 8k of the device the second is paged. Writing a 16 bit page - value to anywhere in the first 8k will cause the second 8k to page around. - - To boot the device a bios extension must be installed into the first 8k - of flash that is smart enough to copy itself down, page in the rest of - itself and begin executing. - - ##################################################################### */ - -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/init.h> -#include <linux/spinlock.h> -#include <asm/io.h> - -#include <linux/mtd/map.h> -#include <linux/mtd/mtd.h> - - -#define WINDOW_START 0xd8000 -#define WINDOW_LENGTH 0x2000 -#define WINDOW_SHIFT 25 -#define WINDOW_MASK 0x1FFF - -/* Actually we could use two spinlocks, but we'd have to have - more private space in the struct map_info. We lose a little - performance like this, but we'd probably lose more by having - the extra indirection from having one of the map->map_priv - fields pointing to yet another private struct. -*/ -static DEFINE_SPINLOCK(vmax301_spin); - -static void __vmax301_page(struct map_info *map, unsigned long page) -{ - writew(page, map->map_priv_2 - WINDOW_LENGTH); - map->map_priv_1 = page; -} - -static inline void vmax301_page(struct map_info *map, - unsigned long ofs) -{ - unsigned long page = (ofs >> WINDOW_SHIFT); - if (map->map_priv_1 != page) - __vmax301_page(map, page); -} - -static map_word vmax301_read8(struct map_info *map, unsigned long ofs) -{ - map_word ret; - spin_lock(&vmax301_spin); - vmax301_page(map, ofs); - ret.x[0] = readb(map->map_priv_2 + (ofs & WINDOW_MASK)); - spin_unlock(&vmax301_spin); - return ret; -} - -static void vmax301_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) -{ - while(len) { - unsigned long thislen = len; - if (len > (WINDOW_LENGTH - (from & WINDOW_MASK))) - thislen = WINDOW_LENGTH-(from & WINDOW_MASK); - spin_lock(&vmax301_spin); - vmax301_page(map, from); - memcpy_fromio(to, map->map_priv_2 + from, thislen); - spin_unlock(&vmax301_spin); - to += thislen; - from += thislen; - len -= thislen; - } -} - -static void vmax301_write8(struct map_info *map, map_word d, unsigned long adr) -{ - spin_lock(&vmax301_spin); - vmax301_page(map, adr); - writeb(d.x[0], map->map_priv_2 + (adr & WINDOW_MASK)); - spin_unlock(&vmax301_spin); -} - -static void vmax301_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) -{ - while(len) { - unsigned long thislen = len; - if (len > (WINDOW_LENGTH - (to & WINDOW_MASK))) - thislen = WINDOW_LENGTH-(to & WINDOW_MASK); - - spin_lock(&vmax301_spin); - vmax301_page(map, to); - memcpy_toio(map->map_priv_2 + to, from, thislen); - spin_unlock(&vmax301_spin); - to += thislen; - from += thislen; - len -= thislen; - } -} - -static struct map_info vmax_map[2] = { - { - .name = "VMAX301 Internal Flash", - .phys = NO_XIP, - .size = 3*2*1024*1024, - .bankwidth = 1, - .read = vmax301_read8, - .copy_from = vmax301_copy_from, - .write = vmax301_write8, - .copy_to = vmax301_copy_to, - .map_priv_1 = WINDOW_START + WINDOW_LENGTH, - .map_priv_2 = 0xFFFFFFFF - }, - { - .name = "VMAX301 Socket", - .phys = NO_XIP, - .size = 0, - .bankwidth = 1, - .read = vmax301_read8, - .copy_from = vmax301_copy_from, - .write = vmax301_write8, - .copy_to = vmax301_copy_to, - .map_priv_1 = WINDOW_START + (3*WINDOW_LENGTH), - .map_priv_2 = 0xFFFFFFFF - } -}; - -static struct mtd_info *vmax_mtd[2] = {NULL, NULL}; - -static void __exit cleanup_vmax301(void) -{ - int i; - - for (i=0; i<2; i++) { - if (vmax_mtd[i]) { - mtd_device_unregister(vmax_mtd[i]); - map_destroy(vmax_mtd[i]); - } - } - iounmap((void *)vmax_map[0].map_priv_1 - WINDOW_START); -} - -static int __init init_vmax301(void) -{ - int i; - unsigned long iomapadr; - // Print out our little header.. - printk("Tempustech VMAX 301 MEM:0x%x-0x%x\n",WINDOW_START, - WINDOW_START+4*WINDOW_LENGTH); - - iomapadr = (unsigned long)ioremap(WINDOW_START, WINDOW_LENGTH*4); - if (!iomapadr) { - printk("Failed to ioremap memory region\n"); - return -EIO; - } - /* Put the address in the map's private data area. - We store the actual MTD IO address rather than the - address of the first half, because it's used more - often. - */ - vmax_map[0].map_priv_2 = iomapadr + WINDOW_START; - vmax_map[1].map_priv_2 = iomapadr + (3*WINDOW_START); - - for (i=0; i<2; i++) { - vmax_mtd[i] = do_map_probe("cfi_probe", &vmax_map[i]); - if (!vmax_mtd[i]) - vmax_mtd[i] = do_map_probe("jedec", &vmax_map[i]); - if (!vmax_mtd[i]) - vmax_mtd[i] = do_map_probe("map_ram", &vmax_map[i]); - if (!vmax_mtd[i]) - vmax_mtd[i] = do_map_probe("map_rom", &vmax_map[i]); - if (vmax_mtd[i]) { - vmax_mtd[i]->owner = THIS_MODULE; - mtd_device_register(vmax_mtd[i], NULL, 0); - } - } - - if (!vmax_mtd[0] && !vmax_mtd[1]) { - iounmap((void *)iomapadr); - return -ENXIO; - } - - return 0; -} - -module_init(init_vmax301); -module_exit(cleanup_vmax301); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>"); -MODULE_DESCRIPTION("MTD map driver for Tempustech VMAX SBC301 board"); |