1 files changed, 11 insertions, 35 deletions

diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c
index f4359fe7150..82bd00af5cc 100644
--- a/drivers/mtd/devices/lart.c
+++ b/drivers/mtd/devices/lart.c
@@ -17,7 +17,7 @@
  *           - January 2000
  *
  *    [2] MTD internal API documentation
- *           - http://www.linux-mtd.infradead.org/tech/
+ *           - http://www.linux-mtd.infradead.org/ 
  *
  * Limitations:
  *
@@ -34,9 +34,6 @@
 /* debugging */
 //#define LART_DEBUG
 
-/* partition support */
-#define HAVE_PARTITIONS
-
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/types.h>
@@ -44,9 +41,7 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mtd/mtd.h>
-#ifdef HAVE_PARTITIONS
 #include <linux/mtd/partitions.h>
-#endif
 
 #ifndef CONFIG_SA1100_LART
 #error This is for LART architecture only
@@ -353,7 +348,7 @@ static inline int erase_block (__u32 offset)
    /* put the flash back into command mode */
    write32 (DATA_TO_FLASH (READ_ARRAY),offset);
 
-   /* was the erase successfull? */
+   /* was the erase successful? */
    if ((status & STATUS_ERASE_ERR))
 	 {
 		printk (KERN_WARNING "%s: erase error at address 0x%.8x.\n",module_name,offset);
@@ -372,9 +367,6 @@ static int flash_erase (struct mtd_info *mtd,struct erase_info *instr)
    printk (KERN_DEBUG "%s(addr = 0x%.8x, len = %d)\n", __func__, instr->addr, instr->len);
 #endif
 
-   /* sanity checks */
-   if (instr->addr + instr->len > mtd->size) return (-EINVAL);
-
    /*
 	* check that both start and end of the requested erase are
 	* aligned with the erasesize at the appropriate addresses.
@@ -445,10 +437,6 @@ static int flash_read (struct mtd_info *mtd,loff_t from,size_t len,size_t *retle
    printk (KERN_DEBUG "%s(from = 0x%.8x, len = %d)\n", __func__, (__u32)from, len);
 #endif
 
-   /* sanity checks */
-   if (!len) return (0);
-   if (from + len > mtd->size) return (-EINVAL);
-
    /* we always read len bytes */
    *retlen = len;
 
@@ -508,7 +496,7 @@ static inline int write_dword (__u32 offset,__u32 x)
    /* put the flash back into command mode */
    write32 (DATA_TO_FLASH (READ_ARRAY),offset);
 
-   /* was the write successfull? */
+   /* was the write successful? */
    if ((status & STATUS_PGM_ERR) || read32 (offset) != x)
 	 {
 		printk (KERN_WARNING "%s: write error at address 0x%.8x.\n",module_name,offset);
@@ -527,11 +515,8 @@ static int flash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen
    printk (KERN_DEBUG "%s(to = 0x%.8x, len = %d)\n", __func__, (__u32)to, len);
 #endif
 
-   *retlen = 0;
-
    /* sanity checks */
    if (!len) return (0);
-   if (to + len > mtd->size) return (-EINVAL);
 
    /* first, we write a 0xFF.... padded byte until we reach a dword boundary */
    if (to & (BUSWIDTH - 1))
@@ -598,7 +583,6 @@ static struct mtd_erase_region_info erase_regions[] = {
 	}
 };
 
-#ifdef HAVE_PARTITIONS
 static struct mtd_partition lart_partitions[] = {
 	/* blob */
 	{
@@ -619,7 +603,7 @@ static struct mtd_partition lart_partitions[] = {
 		.size	= INITRD_LEN,		/* MTDPART_SIZ_FULL */
 	}
 };
-#endif
+#define NUM_PARTITIONS ARRAY_SIZE(lart_partitions)
 
 static int __init lart_flash_init (void)
 {
@@ -636,14 +620,15 @@ static int __init lart_flash_init (void)
    mtd.name = module_name;
    mtd.type = MTD_NORFLASH;
    mtd.writesize = 1;
+   mtd.writebufsize = 4;
    mtd.flags = MTD_CAP_NORFLASH;
    mtd.size = FLASH_BLOCKSIZE_PARAM * FLASH_NUMBLOCKS_16m_PARAM + FLASH_BLOCKSIZE_MAIN * FLASH_NUMBLOCKS_16m_MAIN;
    mtd.erasesize = FLASH_BLOCKSIZE_MAIN;
    mtd.numeraseregions = ARRAY_SIZE(erase_regions);
    mtd.eraseregions = erase_regions;
-   mtd.erase = flash_erase;
-   mtd.read = flash_read;
-   mtd.write = flash_write;
+   mtd._erase = flash_erase;
+   mtd._read = flash_read;
+   mtd._write = flash_write;
    mtd.owner = THIS_MODULE;
 
 #ifdef LART_DEBUG
@@ -668,7 +653,6 @@ static int __init lart_flash_init (void)
 			   result,mtd.eraseregions[result].erasesize,mtd.eraseregions[result].erasesize / 1024,
 			   result,mtd.eraseregions[result].numblocks);
 
-#ifdef HAVE_PARTITIONS
    printk ("\npartitions = %d\n", ARRAY_SIZE(lart_partitions));
 
    for (result = 0; result < ARRAY_SIZE(lart_partitions); result++)
@@ -681,24 +665,16 @@ static int __init lart_flash_init (void)
 			 result,lart_partitions[result].offset,
 			 result,lart_partitions[result].size,lart_partitions[result].size / 1024);
 #endif
-#endif
 
-#ifndef HAVE_PARTITIONS
-   result = add_mtd_device (&mtd);
-#else
-   result = add_mtd_partitions (&mtd,lart_partitions, ARRAY_SIZE(lart_partitions));
-#endif
+   result = mtd_device_register(&mtd, lart_partitions,
+                                ARRAY_SIZE(lart_partitions));
 
    return (result);
 }
 
 static void __exit lart_flash_exit (void)
 {
-#ifndef HAVE_PARTITIONS
-   del_mtd_device (&mtd);
-#else
-   del_mtd_partitions (&mtd);
-#endif
+   mtd_device_unregister(&mtd);
 }
 
 module_init (lart_flash_init);