diff options
Diffstat (limited to 'drivers/mtd/devices/doc2001.c')
| -rw-r--r-- | drivers/mtd/devices/doc2001.c | 841 |
1 files changed, 0 insertions, 841 deletions
diff --git a/drivers/mtd/devices/doc2001.c b/drivers/mtd/devices/doc2001.c deleted file mode 100644 index 0990f780362..00000000000 --- a/drivers/mtd/devices/doc2001.c +++ /dev/null @@ -1,841 +0,0 @@ - -/* - * Linux driver for Disk-On-Chip Millennium - * (c) 1999 Machine Vision Holdings, Inc. - * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org> - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <asm/errno.h> -#include <asm/io.h> -#include <asm/uaccess.h> -#include <linux/delay.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/bitops.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/doc2000.h> - -/* #define ECC_DEBUG */ - -/* I have no idea why some DoC chips can not use memcop_form|to_io(). - * This may be due to the different revisions of the ASIC controller built-in or - * simplily a QA/Bug issue. Who knows ?? If you have trouble, please uncomment - * this:*/ -#undef USE_MEMCPY - -static int doc_read(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf); -static int doc_write(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf); -static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, - struct mtd_oob_ops *ops); -static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, - struct mtd_oob_ops *ops); -static int doc_erase (struct mtd_info *mtd, struct erase_info *instr); - -static struct mtd_info *docmillist = NULL; - -/* Perform the required delay cycles by reading from the NOP register */ -static void DoC_Delay(void __iomem * docptr, unsigned short cycles) -{ - volatile char dummy; - int i; - - for (i = 0; i < cycles; i++) - dummy = ReadDOC(docptr, NOP); -} - -/* DOC_WaitReady: Wait for RDY line to be asserted by the flash chip */ -static int _DoC_WaitReady(void __iomem * docptr) -{ - unsigned short c = 0xffff; - - DEBUG(MTD_DEBUG_LEVEL3, - "_DoC_WaitReady called for out-of-line wait\n"); - - /* Out-of-line routine to wait for chip response */ - while (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B) && --c) - ; - - if (c == 0) - DEBUG(MTD_DEBUG_LEVEL2, "_DoC_WaitReady timed out.\n"); - - return (c == 0); -} - -static inline int DoC_WaitReady(void __iomem * docptr) -{ - /* This is inline, to optimise the common case, where it's ready instantly */ - int ret = 0; - - /* 4 read form NOP register should be issued in prior to the read from CDSNControl - see Software Requirement 11.4 item 2. */ - DoC_Delay(docptr, 4); - - if (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) - /* Call the out-of-line routine to wait */ - ret = _DoC_WaitReady(docptr); - - /* issue 2 read from NOP register after reading from CDSNControl register - see Software Requirement 11.4 item 2. */ - DoC_Delay(docptr, 2); - - return ret; -} - -/* DoC_Command: Send a flash command to the flash chip through the CDSN IO register - with the internal pipeline. Each of 4 delay cycles (read from the NOP register) is - required after writing to CDSN Control register, see Software Requirement 11.4 item 3. */ - -static void DoC_Command(void __iomem * docptr, unsigned char command, - unsigned char xtraflags) -{ - /* Assert the CLE (Command Latch Enable) line to the flash chip */ - WriteDOC(xtraflags | CDSN_CTRL_CLE | CDSN_CTRL_CE, docptr, CDSNControl); - DoC_Delay(docptr, 4); - - /* Send the command */ - WriteDOC(command, docptr, Mil_CDSN_IO); - WriteDOC(0x00, docptr, WritePipeTerm); - - /* Lower the CLE line */ - WriteDOC(xtraflags | CDSN_CTRL_CE, docptr, CDSNControl); - DoC_Delay(docptr, 4); -} - -/* DoC_Address: Set the current address for the flash chip through the CDSN IO register - with the internal pipeline. Each of 4 delay cycles (read from the NOP register) is - required after writing to CDSN Control register, see Software Requirement 11.4 item 3. */ - -static inline void DoC_Address(void __iomem * docptr, int numbytes, unsigned long ofs, - unsigned char xtraflags1, unsigned char xtraflags2) -{ - /* Assert the ALE (Address Latch Enable) line to the flash chip */ - WriteDOC(xtraflags1 | CDSN_CTRL_ALE | CDSN_CTRL_CE, docptr, CDSNControl); - DoC_Delay(docptr, 4); - - /* Send the address */ - switch (numbytes) - { - case 1: - /* Send single byte, bits 0-7. */ - WriteDOC(ofs & 0xff, docptr, Mil_CDSN_IO); - WriteDOC(0x00, docptr, WritePipeTerm); - break; - case 2: - /* Send bits 9-16 followed by 17-23 */ - WriteDOC((ofs >> 9) & 0xff, docptr, Mil_CDSN_IO); - WriteDOC((ofs >> 17) & 0xff, docptr, Mil_CDSN_IO); - WriteDOC(0x00, docptr, WritePipeTerm); - break; - case 3: - /* Send 0-7, 9-16, then 17-23 */ - WriteDOC(ofs & 0xff, docptr, Mil_CDSN_IO); - WriteDOC((ofs >> 9) & 0xff, docptr, Mil_CDSN_IO); - WriteDOC((ofs >> 17) & 0xff, docptr, Mil_CDSN_IO); - WriteDOC(0x00, docptr, WritePipeTerm); - break; - default: - return; - } - - /* Lower the ALE line */ - WriteDOC(xtraflags1 | xtraflags2 | CDSN_CTRL_CE, docptr, CDSNControl); - DoC_Delay(docptr, 4); -} - -/* DoC_SelectChip: Select a given flash chip within the current floor */ -static int DoC_SelectChip(void __iomem * docptr, int chip) -{ - /* Select the individual flash chip requested */ - WriteDOC(chip, docptr, CDSNDeviceSelect); - DoC_Delay(docptr, 4); - - /* Wait for it to be ready */ - return DoC_WaitReady(docptr); -} - -/* DoC_SelectFloor: Select a given floor (bank of flash chips) */ -static int DoC_SelectFloor(void __iomem * docptr, int floor) -{ - /* Select the floor (bank) of chips required */ - WriteDOC(floor, docptr, FloorSelect); - - /* Wait for the chip to be ready */ - return DoC_WaitReady(docptr); -} - -/* DoC_IdentChip: Identify a given NAND chip given {floor,chip} */ -static int DoC_IdentChip(struct DiskOnChip *doc, int floor, int chip) -{ - int mfr, id, i, j; - volatile char dummy; - - /* Page in the required floor/chip - FIXME: is this supported by Millennium ?? */ - DoC_SelectFloor(doc->virtadr, floor); - DoC_SelectChip(doc->virtadr, chip); - - /* Reset the chip, see Software Requirement 11.4 item 1. */ - DoC_Command(doc->virtadr, NAND_CMD_RESET, CDSN_CTRL_WP); - DoC_WaitReady(doc->virtadr); - - /* Read the NAND chip ID: 1. Send ReadID command */ - DoC_Command(doc->virtadr, NAND_CMD_READID, CDSN_CTRL_WP); - - /* Read the NAND chip ID: 2. Send address byte zero */ - DoC_Address(doc->virtadr, 1, 0x00, CDSN_CTRL_WP, 0x00); - - /* Read the manufacturer and device id codes of the flash device through - CDSN IO register see Software Requirement 11.4 item 5.*/ - dummy = ReadDOC(doc->virtadr, ReadPipeInit); - DoC_Delay(doc->virtadr, 2); - mfr = ReadDOC(doc->virtadr, Mil_CDSN_IO); - - DoC_Delay(doc->virtadr, 2); - id = ReadDOC(doc->virtadr, Mil_CDSN_IO); - dummy = ReadDOC(doc->virtadr, LastDataRead); - - /* No response - return failure */ - if (mfr == 0xff || mfr == 0) - return 0; - - /* FIXME: to deal with multi-flash on multi-Millennium case more carefully */ - for (i = 0; nand_flash_ids[i].name != NULL; i++) { - if ( id == nand_flash_ids[i].id) { - /* Try to identify manufacturer */ - for (j = 0; nand_manuf_ids[j].id != 0x0; j++) { - if (nand_manuf_ids[j].id == mfr) - break; - } - printk(KERN_INFO "Flash chip found: Manufacturer ID: %2.2X, " - "Chip ID: %2.2X (%s:%s)\n", - mfr, id, nand_manuf_ids[j].name, nand_flash_ids[i].name); - doc->mfr = mfr; - doc->id = id; - doc->chipshift = ffs((nand_flash_ids[i].chipsize << 20)) - 1; - break; - } - } - - if (nand_flash_ids[i].name == NULL) - return 0; - else - return 1; -} - -/* DoC_ScanChips: Find all NAND chips present in a DiskOnChip, and identify them */ -static void DoC_ScanChips(struct DiskOnChip *this) -{ - int floor, chip; - int numchips[MAX_FLOORS_MIL]; - int ret; - - this->numchips = 0; - this->mfr = 0; - this->id = 0; - - /* For each floor, find the number of valid chips it contains */ - for (floor = 0,ret = 1; floor < MAX_FLOORS_MIL; floor++) { - numchips[floor] = 0; - for (chip = 0; chip < MAX_CHIPS_MIL && ret != 0; chip++) { - ret = DoC_IdentChip(this, floor, chip); - if (ret) { - numchips[floor]++; - this->numchips++; - } - } - } - /* If there are none at all that we recognise, bail */ - if (!this->numchips) { - printk("No flash chips recognised.\n"); - return; - } - - /* Allocate an array to hold the information for each chip */ - this->chips = kmalloc(sizeof(struct Nand) * this->numchips, GFP_KERNEL); - if (!this->chips){ - printk("No memory for allocating chip info structures\n"); - return; - } - - /* Fill out the chip array with {floor, chipno} for each - * detected chip in the device. */ - for (floor = 0, ret = 0; floor < MAX_FLOORS_MIL; floor++) { - for (chip = 0 ; chip < numchips[floor] ; chip++) { - this->chips[ret].floor = floor; - this->chips[ret].chip = chip; - this->chips[ret].curadr = 0; - this->chips[ret].curmode = 0x50; - ret++; - } - } - - /* Calculate and print the total size of the device */ - this->totlen = this->numchips * (1 << this->chipshift); - printk(KERN_INFO "%d flash chips found. Total DiskOnChip size: %ld MiB\n", - this->numchips ,this->totlen >> 20); -} - -static int DoCMil_is_alias(struct DiskOnChip *doc1, struct DiskOnChip *doc2) -{ - int tmp1, tmp2, retval; - - if (doc1->physadr == doc2->physadr) - return 1; - - /* Use the alias resolution register which was set aside for this - * purpose. If it's value is the same on both chips, they might - * be the same chip, and we write to one and check for a change in - * the other. It's unclear if this register is usuable in the - * DoC 2000 (it's in the Millenium docs), but it seems to work. */ - tmp1 = ReadDOC(doc1->virtadr, AliasResolution); - tmp2 = ReadDOC(doc2->virtadr, AliasResolution); - if (tmp1 != tmp2) - return 0; - - WriteDOC((tmp1+1) % 0xff, doc1->virtadr, AliasResolution); - tmp2 = ReadDOC(doc2->virtadr, AliasResolution); - if (tmp2 == (tmp1+1) % 0xff) - retval = 1; - else - retval = 0; - - /* Restore register contents. May not be necessary, but do it just to - * be safe. */ - WriteDOC(tmp1, doc1->virtadr, AliasResolution); - - return retval; -} - -/* This routine is found from the docprobe code by symbol_get(), - * which will bump the use count of this module. */ -void DoCMil_init(struct mtd_info *mtd) -{ - struct DiskOnChip *this = mtd->priv; - struct DiskOnChip *old = NULL; - - /* We must avoid being called twice for the same device. */ - if (docmillist) - old = docmillist->priv; - - while (old) { - if (DoCMil_is_alias(this, old)) { - printk(KERN_NOTICE "Ignoring DiskOnChip Millennium at " - "0x%lX - already configured\n", this->physadr); - iounmap(this->virtadr); - kfree(mtd); - return; - } - if (old->nextdoc) - old = old->nextdoc->priv; - else - old = NULL; - } - - mtd->name = "DiskOnChip Millennium"; - printk(KERN_NOTICE "DiskOnChip Millennium found at address 0x%lX\n", - this->physadr); - - mtd->type = MTD_NANDFLASH; - mtd->flags = MTD_CAP_NANDFLASH; - mtd->size = 0; - - /* FIXME: erase size is not always 8KiB */ - mtd->erasesize = 0x2000; - - mtd->writesize = 512; - mtd->oobsize = 16; - mtd->owner = THIS_MODULE; - mtd->erase = doc_erase; - mtd->point = NULL; - mtd->unpoint = NULL; - mtd->read = doc_read; - mtd->write = doc_write; - mtd->read_oob = doc_read_oob; - mtd->write_oob = doc_write_oob; - mtd->sync = NULL; - - this->totlen = 0; - this->numchips = 0; - this->curfloor = -1; - this->curchip = -1; - - /* Ident all the chips present. */ - DoC_ScanChips(this); - - if (!this->totlen) { - kfree(mtd); - iounmap(this->virtadr); - } else { - this->nextdoc = docmillist; - docmillist = mtd; - mtd->size = this->totlen; - add_mtd_device(mtd); - return; - } -} -EXPORT_SYMBOL_GPL(DoCMil_init); - -static int doc_read (struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf) -{ - int i, ret; - volatile char dummy; - unsigned char syndrome[6], eccbuf[6]; - struct DiskOnChip *this = mtd->priv; - void __iomem *docptr = this->virtadr; - struct Nand *mychip = &this->chips[from >> (this->chipshift)]; - - /* Don't allow read past end of device */ - if (from >= this->totlen) - return -EINVAL; - - /* Don't allow a single read to cross a 512-byte block boundary */ - if (from + len > ((from | 0x1ff) + 1)) - len = ((from | 0x1ff) + 1) - from; - - /* Find the chip which is to be used and select it */ - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(docptr, mychip->floor); - DoC_SelectChip(docptr, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(docptr, mychip->chip); - } - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - /* issue the Read0 or Read1 command depend on which half of the page - we are accessing. Polling the Flash Ready bit after issue 3 bytes - address in Sequence Read Mode, see Software Requirement 11.4 item 1.*/ - DoC_Command(docptr, (from >> 8) & 1, CDSN_CTRL_WP); - DoC_Address(docptr, 3, from, CDSN_CTRL_WP, 0x00); - DoC_WaitReady(docptr); - - /* init the ECC engine, see Reed-Solomon EDC/ECC 11.1 .*/ - WriteDOC (DOC_ECC_RESET, docptr, ECCConf); - WriteDOC (DOC_ECC_EN, docptr, ECCConf); - - /* Read the data via the internal pipeline through CDSN IO register, - see Pipelined Read Operations 11.3 */ - dummy = ReadDOC(docptr, ReadPipeInit); -#ifndef USE_MEMCPY - for (i = 0; i < len-1; i++) { - /* N.B. you have to increase the source address in this way or the - ECC logic will not work properly */ - buf[i] = ReadDOC(docptr, Mil_CDSN_IO + (i & 0xff)); - } -#else - memcpy_fromio(buf, docptr + DoC_Mil_CDSN_IO, len - 1); -#endif - buf[len - 1] = ReadDOC(docptr, LastDataRead); - - /* Let the caller know we completed it */ - *retlen = len; - ret = 0; - - /* Read the ECC data from Spare Data Area, - see Reed-Solomon EDC/ECC 11.1 */ - dummy = ReadDOC(docptr, ReadPipeInit); -#ifndef USE_MEMCPY - for (i = 0; i < 5; i++) { - /* N.B. you have to increase the source address in this way or the - ECC logic will not work properly */ - eccbuf[i] = ReadDOC(docptr, Mil_CDSN_IO + i); - } -#else - memcpy_fromio(eccbuf, docptr + DoC_Mil_CDSN_IO, 5); -#endif - eccbuf[5] = ReadDOC(docptr, LastDataRead); - - /* Flush the pipeline */ - dummy = ReadDOC(docptr, ECCConf); - dummy = ReadDOC(docptr, ECCConf); - - /* Check the ECC Status */ - if (ReadDOC(docptr, ECCConf) & 0x80) { - int nb_errors; - /* There was an ECC error */ -#ifdef ECC_DEBUG - printk("DiskOnChip ECC Error: Read at %lx\n", (long)from); -#endif - /* Read the ECC syndrom through the DiskOnChip ECC logic. - These syndrome will be all ZERO when there is no error */ - for (i = 0; i < 6; i++) { - syndrome[i] = ReadDOC(docptr, ECCSyndrome0 + i); - } - nb_errors = doc_decode_ecc(buf, syndrome); -#ifdef ECC_DEBUG - printk("ECC Errors corrected: %x\n", nb_errors); -#endif - if (nb_errors < 0) { - /* We return error, but have actually done the read. Not that - this can be told to user-space, via sys_read(), but at least - MTD-aware stuff can know about it by checking *retlen */ - ret = -EIO; - } - } - -#ifdef PSYCHO_DEBUG - printk("ECC DATA at %lx: %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n", - (long)from, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3], - eccbuf[4], eccbuf[5]); -#endif - - /* disable the ECC engine */ - WriteDOC(DOC_ECC_DIS, docptr , ECCConf); - - return ret; -} - -static int doc_write (struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf) -{ - int i,ret = 0; - char eccbuf[6]; - volatile char dummy; - struct DiskOnChip *this = mtd->priv; - void __iomem *docptr = this->virtadr; - struct Nand *mychip = &this->chips[to >> (this->chipshift)]; - - /* Don't allow write past end of device */ - if (to >= this->totlen) - return -EINVAL; - -#if 0 - /* Don't allow a single write to cross a 512-byte block boundary */ - if (to + len > ( (to | 0x1ff) + 1)) - len = ((to | 0x1ff) + 1) - to; -#else - /* Don't allow writes which aren't exactly one block */ - if (to & 0x1ff || len != 0x200) - return -EINVAL; -#endif - - /* Find the chip which is to be used and select it */ - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(docptr, mychip->floor); - DoC_SelectChip(docptr, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(docptr, mychip->chip); - } - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - /* Reset the chip, see Software Requirement 11.4 item 1. */ - DoC_Command(docptr, NAND_CMD_RESET, 0x00); - DoC_WaitReady(docptr); - /* Set device to main plane of flash */ - DoC_Command(docptr, NAND_CMD_READ0, 0x00); - - /* issue the Serial Data In command to initial the Page Program process */ - DoC_Command(docptr, NAND_CMD_SEQIN, 0x00); - DoC_Address(docptr, 3, to, 0x00, 0x00); - DoC_WaitReady(docptr); - - /* init the ECC engine, see Reed-Solomon EDC/ECC 11.1 .*/ - WriteDOC (DOC_ECC_RESET, docptr, ECCConf); - WriteDOC (DOC_ECC_EN | DOC_ECC_RW, docptr, ECCConf); - - /* Write the data via the internal pipeline through CDSN IO register, - see Pipelined Write Operations 11.2 */ -#ifndef USE_MEMCPY - for (i = 0; i < len; i++) { - /* N.B. you have to increase the source address in this way or the - ECC logic will not work properly */ - WriteDOC(buf[i], docptr, Mil_CDSN_IO + i); - } -#else - memcpy_toio(docptr + DoC_Mil_CDSN_IO, buf, len); -#endif - WriteDOC(0x00, docptr, WritePipeTerm); - - /* Write ECC data to flash, the ECC info is generated by the DiskOnChip ECC logic - see Reed-Solomon EDC/ECC 11.1 */ - WriteDOC(0, docptr, NOP); - WriteDOC(0, docptr, NOP); - WriteDOC(0, docptr, NOP); - - /* Read the ECC data through the DiskOnChip ECC logic */ - for (i = 0; i < 6; i++) { - eccbuf[i] = ReadDOC(docptr, ECCSyndrome0 + i); - } - - /* ignore the ECC engine */ - WriteDOC(DOC_ECC_DIS, docptr , ECCConf); - -#ifndef USE_MEMCPY - /* Write the ECC data to flash */ - for (i = 0; i < 6; i++) { - /* N.B. you have to increase the source address in this way or the - ECC logic will not work properly */ - WriteDOC(eccbuf[i], docptr, Mil_CDSN_IO + i); - } -#else - memcpy_toio(docptr + DoC_Mil_CDSN_IO, eccbuf, 6); -#endif - - /* write the block status BLOCK_USED (0x5555) at the end of ECC data - FIXME: this is only a hack for programming the IPL area for LinuxBIOS - and should be replace with proper codes in user space utilities */ - WriteDOC(0x55, docptr, Mil_CDSN_IO); - WriteDOC(0x55, docptr, Mil_CDSN_IO + 1); - - WriteDOC(0x00, docptr, WritePipeTerm); - -#ifdef PSYCHO_DEBUG - printk("OOB data at %lx is %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n", - (long) to, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3], - eccbuf[4], eccbuf[5]); -#endif - - /* Commit the Page Program command and wait for ready - see Software Requirement 11.4 item 1.*/ - DoC_Command(docptr, NAND_CMD_PAGEPROG, 0x00); - DoC_WaitReady(docptr); - - /* Read the status of the flash device through CDSN IO register - see Software Requirement 11.4 item 5.*/ - DoC_Command(docptr, NAND_CMD_STATUS, CDSN_CTRL_WP); - dummy = ReadDOC(docptr, ReadPipeInit); - DoC_Delay(docptr, 2); - if (ReadDOC(docptr, Mil_CDSN_IO) & 1) { - printk("Error programming flash\n"); - /* Error in programming - FIXME: implement Bad Block Replacement (in nftl.c ??) */ - *retlen = 0; - ret = -EIO; - } - dummy = ReadDOC(docptr, LastDataRead); - - /* Let the caller know we completed it */ - *retlen = len; - - return ret; -} - -static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, - struct mtd_oob_ops *ops) -{ -#ifndef USE_MEMCPY - int i; -#endif - volatile char dummy; - struct DiskOnChip *this = mtd->priv; - void __iomem *docptr = this->virtadr; - struct Nand *mychip = &this->chips[ofs >> this->chipshift]; - uint8_t *buf = ops->oobbuf; - size_t len = ops->len; - - BUG_ON(ops->mode != MTD_OOB_PLACE); - - ofs += ops->ooboffs; - - /* Find the chip which is to be used and select it */ - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(docptr, mychip->floor); - DoC_SelectChip(docptr, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(docptr, mychip->chip); - } - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - /* disable the ECC engine */ - WriteDOC (DOC_ECC_RESET, docptr, ECCConf); - WriteDOC (DOC_ECC_DIS, docptr, ECCConf); - - /* issue the Read2 command to set the pointer to the Spare Data Area. - Polling the Flash Ready bit after issue 3 bytes address in - Sequence Read Mode, see Software Requirement 11.4 item 1.*/ - DoC_Command(docptr, NAND_CMD_READOOB, CDSN_CTRL_WP); - DoC_Address(docptr, 3, ofs, CDSN_CTRL_WP, 0x00); - DoC_WaitReady(docptr); - - /* Read the data out via the internal pipeline through CDSN IO register, - see Pipelined Read Operations 11.3 */ - dummy = ReadDOC(docptr, ReadPipeInit); -#ifndef USE_MEMCPY - for (i = 0; i < len-1; i++) { - /* N.B. you have to increase the source address in this way or the - ECC logic will not work properly */ - buf[i] = ReadDOC(docptr, Mil_CDSN_IO + i); - } -#else - memcpy_fromio(buf, docptr + DoC_Mil_CDSN_IO, len - 1); -#endif - buf[len - 1] = ReadDOC(docptr, LastDataRead); - - ops->retlen = len; - - return 0; -} - -static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, - struct mtd_oob_ops *ops) -{ -#ifndef USE_MEMCPY - int i; -#endif - volatile char dummy; - int ret = 0; - struct DiskOnChip *this = mtd->priv; - void __iomem *docptr = this->virtadr; - struct Nand *mychip = &this->chips[ofs >> this->chipshift]; - uint8_t *buf = ops->oobbuf; - size_t len = ops->len; - - BUG_ON(ops->mode != MTD_OOB_PLACE); - - ofs += ops->ooboffs; - - /* Find the chip which is to be used and select it */ - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(docptr, mychip->floor); - DoC_SelectChip(docptr, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(docptr, mychip->chip); - } - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - /* disable the ECC engine */ - WriteDOC (DOC_ECC_RESET, docptr, ECCConf); - WriteDOC (DOC_ECC_DIS, docptr, ECCConf); - - /* Reset the chip, see Software Requirement 11.4 item 1. */ - DoC_Command(docptr, NAND_CMD_RESET, CDSN_CTRL_WP); - DoC_WaitReady(docptr); - /* issue the Read2 command to set the pointer to the Spare Data Area. */ - DoC_Command(docptr, NAND_CMD_READOOB, CDSN_CTRL_WP); - - /* issue the Serial Data In command to initial the Page Program process */ - DoC_Command(docptr, NAND_CMD_SEQIN, 0x00); - DoC_Address(docptr, 3, ofs, 0x00, 0x00); - - /* Write the data via the internal pipeline through CDSN IO register, - see Pipelined Write Operations 11.2 */ -#ifndef USE_MEMCPY - for (i = 0; i < len; i++) { - /* N.B. you have to increase the source address in this way or the - ECC logic will not work properly */ - WriteDOC(buf[i], docptr, Mil_CDSN_IO + i); - } -#else - memcpy_toio(docptr + DoC_Mil_CDSN_IO, buf, len); -#endif - WriteDOC(0x00, docptr, WritePipeTerm); - - /* Commit the Page Program command and wait for ready - see Software Requirement 11.4 item 1.*/ - DoC_Command(docptr, NAND_CMD_PAGEPROG, 0x00); - DoC_WaitReady(docptr); - - /* Read the status of the flash device through CDSN IO register - see Software Requirement 11.4 item 5.*/ - DoC_Command(docptr, NAND_CMD_STATUS, 0x00); - dummy = ReadDOC(docptr, ReadPipeInit); - DoC_Delay(docptr, 2); - if (ReadDOC(docptr, Mil_CDSN_IO) & 1) { - printk("Error programming oob data\n"); - /* FIXME: implement Bad Block Replacement (in nftl.c ??) */ - ops->retlen = 0; - ret = -EIO; - } - dummy = ReadDOC(docptr, LastDataRead); - - ops->retlen = len; - - return ret; -} - -int doc_erase (struct mtd_info *mtd, struct erase_info *instr) -{ - volatile char dummy; - struct DiskOnChip *this = mtd->priv; - __u32 ofs = instr->addr; - __u32 len = instr->len; - void __iomem *docptr = this->virtadr; - struct Nand *mychip = &this->chips[ofs >> this->chipshift]; - - if (len != mtd->erasesize) - printk(KERN_WARNING "Erase not right size (%x != %x)n", - len, mtd->erasesize); - - /* Find the chip which is to be used and select it */ - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(docptr, mychip->floor); - DoC_SelectChip(docptr, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(docptr, mychip->chip); - } - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - instr->state = MTD_ERASE_PENDING; - - /* issue the Erase Setup command */ - DoC_Command(docptr, NAND_CMD_ERASE1, 0x00); - DoC_Address(docptr, 2, ofs, 0x00, 0x00); - - /* Commit the Erase Start command and wait for ready - see Software Requirement 11.4 item 1.*/ - DoC_Command(docptr, NAND_CMD_ERASE2, 0x00); - DoC_WaitReady(docptr); - - instr->state = MTD_ERASING; - - /* Read the status of the flash device through CDSN IO register - see Software Requirement 11.4 item 5. - FIXME: it seems that we are not wait long enough, some blocks are not - erased fully */ - DoC_Command(docptr, NAND_CMD_STATUS, CDSN_CTRL_WP); - dummy = ReadDOC(docptr, ReadPipeInit); - DoC_Delay(docptr, 2); - if (ReadDOC(docptr, Mil_CDSN_IO) & 1) { - printk("Error Erasing at 0x%x\n", ofs); - /* There was an error - FIXME: implement Bad Block Replacement (in nftl.c ??) */ - instr->state = MTD_ERASE_FAILED; - } else - instr->state = MTD_ERASE_DONE; - dummy = ReadDOC(docptr, LastDataRead); - - mtd_erase_callback(instr); - - return 0; -} - -/**************************************************************************** - * - * Module stuff - * - ****************************************************************************/ - -static void __exit cleanup_doc2001(void) -{ - struct mtd_info *mtd; - struct DiskOnChip *this; - - while ((mtd=docmillist)) { - this = mtd->priv; - docmillist = this->nextdoc; - - del_mtd_device(mtd); - - iounmap(this->virtadr); - kfree(this->chips); - kfree(mtd); - } -} - -module_exit(cleanup_doc2001); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org> et al."); -MODULE_DESCRIPTION("Alternative driver for DiskOnChip Millennium"); |