aboutsummaryrefslogtreecommitdiff
path: root/drivers/mtd/chips/jedec_probe.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/chips/jedec_probe.c')
-rw-r--r--drivers/mtd/chips/jedec_probe.c84
1 files changed, 39 insertions, 45 deletions
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index d72a5fb2d04..7c0b27d132b 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -120,7 +120,7 @@
#define PM49FL008 0x006A
/* Sharp */
-#define LH28F640BF 0x00b0
+#define LH28F640BF 0x00B0
/* ST - www.st.com */
#define M29F800AB 0x0058
@@ -1299,13 +1299,14 @@ static const struct amd_flash_info jedec_table[] = {
.mfr_id = CFI_MFR_SHARP,
.dev_id = LH28F640BF,
.name = "LH28F640BF",
- .devtypes = CFI_DEVICETYPE_X8,
+ .devtypes = CFI_DEVICETYPE_X16,
.uaddr = MTD_UADDR_UNNECESSARY,
- .dev_size = SIZE_4MiB,
- .cmd_set = P_ID_INTEL_STD,
- .nr_regions = 1,
+ .dev_size = SIZE_8MiB,
+ .cmd_set = P_ID_INTEL_EXT,
+ .nr_regions = 2,
.regions = {
- ERASEINFO(0x40000,16),
+ ERASEINFO(0x10000, 127),
+ ERASEINFO(0x02000, 8),
}
}, {
.mfr_id = CFI_MFR_SST,
@@ -1914,11 +1915,10 @@ static void jedec_reset(u32 base, struct map_info *map, struct cfi_private *cfi)
* (oh and incidentaly the jedec spec - 3.5.3.3) the reset
* sequence is *supposed* to be 0xaa at 0x5555, 0x55 at
* 0x2aaa, 0xF0 at 0x5555 this will not affect the AMD chips
- * as they will ignore the writes and dont care what address
+ * as they will ignore the writes and don't care what address
* the F0 is written to */
if (cfi->addr_unlock1) {
- DEBUG( MTD_DEBUG_LEVEL3,
- "reset unlock called %x %x \n",
+ pr_debug( "reset unlock called %x %x \n",
cfi->addr_unlock1,cfi->addr_unlock2);
cfi_send_gen_cmd(0xaa, cfi->addr_unlock1, base, map, cfi, cfi->device_type, NULL);
cfi_send_gen_cmd(0x55, cfi->addr_unlock2, base, map, cfi, cfi->device_type, NULL);
@@ -1935,14 +1935,14 @@ static void jedec_reset(u32 base, struct map_info *map, struct cfi_private *cfi)
}
-static int cfi_jedec_setup(struct cfi_private *p_cfi, int index)
+static int cfi_jedec_setup(struct map_info *map, struct cfi_private *cfi, int index)
{
int i,num_erase_regions;
uint8_t uaddr;
- if (! (jedec_table[index].devtypes & p_cfi->device_type)) {
- DEBUG(MTD_DEBUG_LEVEL1, "Rejecting potential %s with incompatible %d-bit device type\n",
- jedec_table[index].name, 4 * (1<<p_cfi->device_type));
+ if (!(jedec_table[index].devtypes & cfi->device_type)) {
+ pr_debug("Rejecting potential %s with incompatible %d-bit device type\n",
+ jedec_table[index].name, 4 * (1<<cfi->device_type));
return 0;
}
@@ -1950,27 +1950,28 @@ static int cfi_jedec_setup(struct cfi_private *p_cfi, int index)
num_erase_regions = jedec_table[index].nr_regions;
- p_cfi->cfiq = kmalloc(sizeof(struct cfi_ident) + num_erase_regions * 4, GFP_KERNEL);
- if (!p_cfi->cfiq) {
+ cfi->cfiq = kmalloc(sizeof(struct cfi_ident) + num_erase_regions * 4, GFP_KERNEL);
+ if (!cfi->cfiq) {
//xx printk(KERN_WARNING "%s: kmalloc failed for CFI ident structure\n", map->name);
return 0;
}
- memset(p_cfi->cfiq,0,sizeof(struct cfi_ident));
+ memset(cfi->cfiq, 0, sizeof(struct cfi_ident));
- p_cfi->cfiq->P_ID = jedec_table[index].cmd_set;
- p_cfi->cfiq->NumEraseRegions = jedec_table[index].nr_regions;
- p_cfi->cfiq->DevSize = jedec_table[index].dev_size;
- p_cfi->cfi_mode = CFI_MODE_JEDEC;
+ cfi->cfiq->P_ID = jedec_table[index].cmd_set;
+ cfi->cfiq->NumEraseRegions = jedec_table[index].nr_regions;
+ cfi->cfiq->DevSize = jedec_table[index].dev_size;
+ cfi->cfi_mode = CFI_MODE_JEDEC;
+ cfi->sector_erase_cmd = CMD(0x30);
for (i=0; i<num_erase_regions; i++){
- p_cfi->cfiq->EraseRegionInfo[i] = jedec_table[index].regions[i];
+ cfi->cfiq->EraseRegionInfo[i] = jedec_table[index].regions[i];
}
- p_cfi->cmdset_priv = NULL;
+ cfi->cmdset_priv = NULL;
/* This may be redundant for some cases, but it doesn't hurt */
- p_cfi->mfr = jedec_table[index].mfr_id;
- p_cfi->id = jedec_table[index].dev_id;
+ cfi->mfr = jedec_table[index].mfr_id;
+ cfi->id = jedec_table[index].dev_id;
uaddr = jedec_table[index].uaddr;
@@ -1978,8 +1979,8 @@ static int cfi_jedec_setup(struct cfi_private *p_cfi, int index)
our brains explode when we see the datasheets talking about address
lines numbered from A-1 to A18. The CFI table has unlock addresses
in device-words according to the mode the device is connected in */
- p_cfi->addr_unlock1 = unlock_addrs[uaddr].addr1 / p_cfi->device_type;
- p_cfi->addr_unlock2 = unlock_addrs[uaddr].addr2 / p_cfi->device_type;
+ cfi->addr_unlock1 = unlock_addrs[uaddr].addr1 / cfi->device_type;
+ cfi->addr_unlock2 = unlock_addrs[uaddr].addr2 / cfi->device_type;
return 1; /* ok */
}
@@ -2020,7 +2021,7 @@ static inline int jedec_match( uint32_t base,
* there aren't.
*/
if (finfo->dev_id > 0xff) {
- DEBUG( MTD_DEBUG_LEVEL3, "%s(): ID is not 8bit\n",
+ pr_debug("%s(): ID is not 8bit\n",
__func__);
goto match_done;
}
@@ -2044,12 +2045,10 @@ static inline int jedec_match( uint32_t base,
}
/* the part size must fit in the memory window */
- DEBUG( MTD_DEBUG_LEVEL3,
- "MTD %s(): Check fit 0x%.8x + 0x%.8x = 0x%.8x\n",
+ pr_debug("MTD %s(): Check fit 0x%.8x + 0x%.8x = 0x%.8x\n",
__func__, base, 1 << finfo->dev_size, base + (1 << finfo->dev_size) );
if ( base + cfi_interleave(cfi) * ( 1 << finfo->dev_size ) > map->size ) {
- DEBUG( MTD_DEBUG_LEVEL3,
- "MTD %s(): 0x%.4x 0x%.4x %dKiB doesn't fit\n",
+ pr_debug("MTD %s(): 0x%.4x 0x%.4x %dKiB doesn't fit\n",
__func__, finfo->mfr_id, finfo->dev_id,
1 << finfo->dev_size );
goto match_done;
@@ -2060,13 +2059,12 @@ static inline int jedec_match( uint32_t base,
uaddr = finfo->uaddr;
- DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): check unlock addrs 0x%.4x 0x%.4x\n",
+ pr_debug("MTD %s(): check unlock addrs 0x%.4x 0x%.4x\n",
__func__, cfi->addr_unlock1, cfi->addr_unlock2 );
if ( MTD_UADDR_UNNECESSARY != uaddr && MTD_UADDR_DONT_CARE != uaddr
&& ( unlock_addrs[uaddr].addr1 / cfi->device_type != cfi->addr_unlock1 ||
unlock_addrs[uaddr].addr2 / cfi->device_type != cfi->addr_unlock2 ) ) {
- DEBUG( MTD_DEBUG_LEVEL3,
- "MTD %s(): 0x%.4x 0x%.4x did not match\n",
+ pr_debug("MTD %s(): 0x%.4x 0x%.4x did not match\n",
__func__,
unlock_addrs[uaddr].addr1,
unlock_addrs[uaddr].addr2);
@@ -2074,7 +2072,7 @@ static inline int jedec_match( uint32_t base,
}
/*
- * Make sure the ID's dissappear when the device is taken out of
+ * Make sure the ID's disappear when the device is taken out of
* ID mode. The only time this should fail when it should succeed
* is when the ID's are written as data to the same
* addresses. For this rare and unfortunate case the chip
@@ -2082,15 +2080,13 @@ static inline int jedec_match( uint32_t base,
* FIXME - write a driver that takes all of the chip info as
* module parameters, doesn't probe but forces a load.
*/
- DEBUG( MTD_DEBUG_LEVEL3,
- "MTD %s(): check ID's disappear when not in ID mode\n",
+ pr_debug("MTD %s(): check ID's disappear when not in ID mode\n",
__func__ );
jedec_reset( base, map, cfi );
mfr = jedec_read_mfr( map, base, cfi );
id = jedec_read_id( map, base, cfi );
if ( mfr == cfi->mfr && id == cfi->id ) {
- DEBUG( MTD_DEBUG_LEVEL3,
- "MTD %s(): ID 0x%.2x:0x%.2x did not change after reset:\n"
+ pr_debug("MTD %s(): ID 0x%.2x:0x%.2x did not change after reset:\n"
"You might need to manually specify JEDEC parameters.\n",
__func__, cfi->mfr, cfi->id );
goto match_done;
@@ -2103,7 +2099,7 @@ static inline int jedec_match( uint32_t base,
* Put the device back in ID mode - only need to do this if we
* were truly frobbing a real device.
*/
- DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): return to ID mode\n", __func__ );
+ pr_debug("MTD %s(): return to ID mode\n", __func__ );
if (cfi->addr_unlock1) {
cfi_send_gen_cmd(0xaa, cfi->addr_unlock1, base, map, cfi, cfi->device_type, NULL);
cfi_send_gen_cmd(0x55, cfi->addr_unlock2, base, map, cfi, cfi->device_type, NULL);
@@ -2166,16 +2162,14 @@ static int jedec_probe_chip(struct map_info *map, __u32 base,
cfi->mfr = jedec_read_mfr(map, base, cfi);
cfi->id = jedec_read_id(map, base, cfi);
- DEBUG(MTD_DEBUG_LEVEL3,
- "Search for id:(%02x %02x) interleave(%d) type(%d)\n",
+ pr_debug("Search for id:(%02x %02x) interleave(%d) type(%d)\n",
cfi->mfr, cfi->id, cfi_interleave(cfi), cfi->device_type);
for (i = 0; i < ARRAY_SIZE(jedec_table); i++) {
if ( jedec_match( base, map, cfi, &jedec_table[i] ) ) {
- DEBUG( MTD_DEBUG_LEVEL3,
- "MTD %s(): matched device 0x%x,0x%x unlock_addrs: 0x%.4x 0x%.4x\n",
+ pr_debug("MTD %s(): matched device 0x%x,0x%x unlock_addrs: 0x%.4x 0x%.4x\n",
__func__, cfi->mfr, cfi->id,
cfi->addr_unlock1, cfi->addr_unlock2 );
- if (!cfi_jedec_setup(cfi, i))
+ if (!cfi_jedec_setup(map, cfi, i))
return 0;
goto ok_out;
}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-15 17:38:12 +0000