diff options
Diffstat (limited to 'drivers/mtd/chips/cfi_probe.c')
| -rw-r--r-- | drivers/mtd/chips/cfi_probe.c | 122 |
1 files changed, 47 insertions, 75 deletions
diff --git a/drivers/mtd/chips/cfi_probe.c b/drivers/mtd/chips/cfi_probe.c index c418e92e1d9..e8d0164498b 100644 --- a/drivers/mtd/chips/cfi_probe.c +++ b/drivers/mtd/chips/cfi_probe.c @@ -44,17 +44,14 @@ do { \ #define xip_enable(base, map, cfi) \ do { \ - cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); \ - cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); \ + cfi_qry_mode_off(base, map, cfi); \ xip_allowed(base, map); \ } while (0) #define xip_disable_qry(base, map, cfi) \ do { \ xip_disable(); \ - cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); \ - cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); \ - cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL); \ + cfi_qry_mode_on(base, map, cfi); \ } while (0) #else @@ -70,32 +67,6 @@ do { \ in: interleave,type,mode ret: table index, <0 for error */ -static int __xipram qry_present(struct map_info *map, __u32 base, - struct cfi_private *cfi) -{ - int osf = cfi->interleave * cfi->device_type; // scale factor - map_word val[3]; - map_word qry[3]; - - qry[0] = cfi_build_cmd('Q', map, cfi); - qry[1] = cfi_build_cmd('R', map, cfi); - qry[2] = cfi_build_cmd('Y', map, cfi); - - val[0] = map_read(map, base + osf*0x10); - val[1] = map_read(map, base + osf*0x11); - val[2] = map_read(map, base + osf*0x12); - - if (!map_word_equal(map, qry[0], val[0])) - return 0; - - if (!map_word_equal(map, qry[1], val[1])) - return 0; - - if (!map_word_equal(map, qry[2], val[2])) - return 0; - - return 1; // "QRY" found -} static int __xipram cfi_probe_chip(struct map_info *map, __u32 base, unsigned long *chip_map, struct cfi_private *cfi) @@ -116,11 +87,7 @@ static int __xipram cfi_probe_chip(struct map_info *map, __u32 base, } xip_disable(); - cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); - cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); - cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL); - - if (!qry_present(map,base,cfi)) { + if (!cfi_qry_mode_on(base, map, cfi)) { xip_enable(base, map, cfi); return 0; } @@ -141,14 +108,13 @@ static int __xipram cfi_probe_chip(struct map_info *map, __u32 base, start = i << cfi->chipshift; /* This chip should be in read mode if it's one we've already touched. */ - if (qry_present(map, start, cfi)) { + if (cfi_qry_present(map, start, cfi)) { /* Eep. This chip also had the QRY marker. * Is it an alias for the new one? */ - cfi_send_gen_cmd(0xF0, 0, start, map, cfi, cfi->device_type, NULL); - cfi_send_gen_cmd(0xFF, 0, start, map, cfi, cfi->device_type, NULL); + cfi_qry_mode_off(start, map, cfi); /* If the QRY marker goes away, it's an alias */ - if (!qry_present(map, start, cfi)) { + if (!cfi_qry_present(map, start, cfi)) { xip_allowed(base, map); printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n", map->name, base, start); @@ -158,10 +124,9 @@ static int __xipram cfi_probe_chip(struct map_info *map, __u32 base, * unfortunate. Stick the new chip in read mode * too and if it's the same, assume it's an alias. */ /* FIXME: Use other modes to do a proper check */ - cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); - cfi_send_gen_cmd(0xFF, 0, start, map, cfi, cfi->device_type, NULL); + cfi_qry_mode_off(base, map, cfi); - if (qry_present(map, base, cfi)) { + if (cfi_qry_present(map, base, cfi)) { xip_allowed(base, map); printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n", map->name, base, start); @@ -176,8 +141,7 @@ static int __xipram cfi_probe_chip(struct map_info *map, __u32 base, cfi->numchips++; /* Put it back into Read Mode */ - cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); - cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); + cfi_qry_mode_off(base, map, cfi); xip_allowed(base, map); printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n", @@ -194,6 +158,7 @@ static int __xipram cfi_chip_setup(struct map_info *map, __u32 base = 0; int num_erase_regions = cfi_read_query(map, base + (0x10 + 28)*ofs_factor); int i; + int addr_unlock1 = 0x555, addr_unlock2 = 0x2AA; xip_enable(base, map, cfi); #ifdef DEBUG_CFI @@ -203,45 +168,20 @@ static int __xipram cfi_chip_setup(struct map_info *map, return 0; cfi->cfiq = kmalloc(sizeof(struct cfi_ident) + num_erase_regions * 4, GFP_KERNEL); - if (!cfi->cfiq) { - printk(KERN_WARNING "%s: kmalloc failed for CFI ident structure\n", map->name); + if (!cfi->cfiq) return 0; - } memset(cfi->cfiq,0,sizeof(struct cfi_ident)); cfi->cfi_mode = CFI_MODE_CFI; + cfi->sector_erase_cmd = CMD(0x30); + /* Read the CFI info structure */ xip_disable_qry(base, map, cfi); for (i=0; i<(sizeof(struct cfi_ident) + num_erase_regions * 4); i++) ((unsigned char *)cfi->cfiq)[i] = cfi_read_query(map,base + (0x10 + i)*ofs_factor); - /* Note we put the device back into Read Mode BEFORE going into Auto - * Select Mode, as some devices support nesting of modes, others - * don't. This way should always work. - * On cmdset 0001 the writes of 0xaa and 0x55 are not needed, and - * so should be treated as nops or illegal (and so put the device - * back into Read Mode, which is a nop in this case). - */ - cfi_send_gen_cmd(0xf0, 0, base, map, cfi, cfi->device_type, NULL); - cfi_send_gen_cmd(0xaa, 0x555, base, map, cfi, cfi->device_type, NULL); - cfi_send_gen_cmd(0x55, 0x2aa, base, map, cfi, cfi->device_type, NULL); - cfi_send_gen_cmd(0x90, 0x555, base, map, cfi, cfi->device_type, NULL); - cfi->mfr = cfi_read_query16(map, base); - cfi->id = cfi_read_query16(map, base + ofs_factor); - - /* Get AMD/Spansion extended JEDEC ID */ - if (cfi->mfr == CFI_MFR_AMD && (cfi->id & 0xff) == 0x7e) - cfi->id = cfi_read_query(map, base + 0xe * ofs_factor) << 8 | - cfi_read_query(map, base + 0xf * ofs_factor); - - /* Put it back into Read Mode */ - cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); - /* ... even if it's an Intel chip */ - cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); - xip_allowed(base, map); - /* Do any necessary byteswapping */ cfi->cfiq->P_ID = le16_to_cpu(cfi->cfiq->P_ID); @@ -266,9 +206,38 @@ static int __xipram cfi_chip_setup(struct map_info *map, #endif } - printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n", + if (cfi->cfiq->P_ID == P_ID_SST_OLD) { + addr_unlock1 = 0x5555; + addr_unlock2 = 0x2AAA; + } + + /* + * Note we put the device back into Read Mode BEFORE going into Auto + * Select Mode, as some devices support nesting of modes, others + * don't. This way should always work. + * On cmdset 0001 the writes of 0xaa and 0x55 are not needed, and + * so should be treated as nops or illegal (and so put the device + * back into Read Mode, which is a nop in this case). + */ + cfi_send_gen_cmd(0xf0, 0, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0xaa, addr_unlock1, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, addr_unlock2, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x90, addr_unlock1, base, map, cfi, cfi->device_type, NULL); + cfi->mfr = cfi_read_query16(map, base); + cfi->id = cfi_read_query16(map, base + ofs_factor); + + /* Get AMD/Spansion extended JEDEC ID */ + if (cfi->mfr == CFI_MFR_AMD && (cfi->id & 0xff) == 0x7e) + cfi->id = cfi_read_query(map, base + 0xe * ofs_factor) << 8 | + cfi_read_query(map, base + 0xf * ofs_factor); + + /* Put it back into Read Mode */ + cfi_qry_mode_off(base, map, cfi); + xip_allowed(base, map); + + printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank. Manufacturer ID %#08x Chip ID %#08x\n", map->name, cfi->interleave, cfi->device_type*8, base, - map->bankwidth*8); + map->bankwidth*8, cfi->mfr, cfi->id); return 1; } @@ -307,6 +276,9 @@ static char *vendorname(__u16 vendor) case P_ID_SST_PAGE: return "SST Page Write"; + case P_ID_SST_OLD: + return "SST 39VF160x/39VF320x"; + case P_ID_INTEL_PERFORMANCE: return "Intel Performance Code"; |
