diff options
Diffstat (limited to 'drivers/mmc')
111 files changed, 41339 insertions, 11438 deletions
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 12eef393e21..400756ec7c4 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -6,5 +6,4 @@ subdir-ccflags-$(CONFIG_MMC_DEBUG) := -DDEBUG obj-$(CONFIG_MMC) += core/ obj-$(CONFIG_MMC) += card/ -obj-$(CONFIG_MMC) += host/ - +obj-$(subst m,y,$(CONFIG_MMC)) += host/ diff --git a/drivers/mmc/card/Kconfig b/drivers/mmc/card/Kconfig index 57e4416b9ef..5562308699b 100644 --- a/drivers/mmc/card/Kconfig +++ b/drivers/mmc/card/Kconfig @@ -16,6 +16,7 @@ config MMC_BLOCK config MMC_BLOCK_MINORS int "Number of minors per block device" + depends on MMC_BLOCK range 4 256 default 8 help @@ -51,18 +52,18 @@ config MMC_BLOCK_BOUNCE config SDIO_UART tristate "SDIO UART/GPS class support" + depends on TTY help SDIO function driver for SDIO cards that implements the UART class, as well as the GPS class which appears like a UART. config MMC_TEST tristate "MMC host test driver" - default n help Development driver that performs a series of reads and writes to a memory card in order to expose certain well known bugs in host controllers. The tests are executed by writing to the - "test" file in sysfs under each card. Note that whatever is + "test" file in debugfs under each card. Note that whatever is on your card will be overwritten by these tests. This driver is only of interest to those developing or diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 217f82037fc..452782bffeb 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -31,13 +31,17 @@ #include <linux/mutex.h> #include <linux/scatterlist.h> #include <linux/string_helpers.h> +#include <linux/delay.h> +#include <linux/capability.h> +#include <linux/compat.h> +#include <linux/pm_runtime.h> +#include <linux/mmc/ioctl.h> #include <linux/mmc/card.h> #include <linux/mmc/host.h> #include <linux/mmc/mmc.h> #include <linux/mmc/sd.h> -#include <asm/system.h> #include <asm/uaccess.h> #include "queue.h" @@ -48,6 +52,22 @@ MODULE_ALIAS("mmc:block"); #endif #define MODULE_PARAM_PREFIX "mmcblk." +#define INAND_CMD38_ARG_EXT_CSD 113 +#define INAND_CMD38_ARG_ERASE 0x00 +#define INAND_CMD38_ARG_TRIM 0x01 +#define INAND_CMD38_ARG_SECERASE 0x80 +#define INAND_CMD38_ARG_SECTRIM1 0x81 +#define INAND_CMD38_ARG_SECTRIM2 0x88 +#define MMC_BLK_TIMEOUT_MS (10 * 60 * 1000) /* 10 minute timeout */ +#define MMC_SANITIZE_REQ_TIMEOUT 240000 +#define MMC_EXTRACT_INDEX_FROM_ARG(x) ((x & 0x00FF0000) >> 16) + +#define mmc_req_rel_wr(req) (((req->cmd_flags & REQ_FUA) || \ + (req->cmd_flags & REQ_META)) && \ + (rq_data_dir(req) == WRITE)) +#define PACKED_CMD_VER 0x01 +#define PACKED_CMD_WR 0x02 + static DEFINE_MUTEX(block_mutex); /* @@ -64,6 +84,7 @@ static int max_devices; /* 256 minors, so at most 256 separate devices */ static DECLARE_BITMAP(dev_use, 256); +static DECLARE_BITMAP(name_use, 256); /* * There is one mmc_blk_data per slot. @@ -72,16 +93,62 @@ struct mmc_blk_data { spinlock_t lock; struct gendisk *disk; struct mmc_queue queue; + struct list_head part; + + unsigned int flags; +#define MMC_BLK_CMD23 (1 << 0) /* Can do SET_BLOCK_COUNT for multiblock */ +#define MMC_BLK_REL_WR (1 << 1) /* MMC Reliable write support */ +#define MMC_BLK_PACKED_CMD (1 << 2) /* MMC packed command support */ unsigned int usage; unsigned int read_only; + unsigned int part_type; + unsigned int name_idx; + unsigned int reset_done; +#define MMC_BLK_READ BIT(0) +#define MMC_BLK_WRITE BIT(1) +#define MMC_BLK_DISCARD BIT(2) +#define MMC_BLK_SECDISCARD BIT(3) + + /* + * Only set in main mmc_blk_data associated + * with mmc_card with mmc_set_drvdata, and keeps + * track of the current selected device partition. + */ + unsigned int part_curr; + struct device_attribute force_ro; + struct device_attribute power_ro_lock; + int area_type; }; static DEFINE_MUTEX(open_lock); +enum { + MMC_PACKED_NR_IDX = -1, + MMC_PACKED_NR_ZERO, + MMC_PACKED_NR_SINGLE, +}; + module_param(perdev_minors, int, 0444); MODULE_PARM_DESC(perdev_minors, "Minors numbers to allocate per device"); +static inline int mmc_blk_part_switch(struct mmc_card *card, + struct mmc_blk_data *md); +static int get_card_status(struct mmc_card *card, u32 *status, int retries); + +static inline void mmc_blk_clear_packed(struct mmc_queue_req *mqrq) +{ + struct mmc_packed *packed = mqrq->packed; + + BUG_ON(!packed); + + mqrq->cmd_type = MMC_PACKED_NONE; + packed->nr_entries = MMC_PACKED_NR_ZERO; + packed->idx_failure = MMC_PACKED_NR_IDX; + packed->retries = 0; + packed->blocks = 0; +} + static struct mmc_blk_data *mmc_blk_get(struct gendisk *disk) { struct mmc_blk_data *md; @@ -97,17 +164,22 @@ static struct mmc_blk_data *mmc_blk_get(struct gendisk *disk) return md; } +static inline int mmc_get_devidx(struct gendisk *disk) +{ + int devmaj = MAJOR(disk_devt(disk)); + int devidx = MINOR(disk_devt(disk)) / perdev_minors; + + if (!devmaj) + devidx = disk->first_minor / perdev_minors; + return devidx; +} + static void mmc_blk_put(struct mmc_blk_data *md) { mutex_lock(&open_lock); md->usage--; if (md->usage == 0) { - int devmaj = MAJOR(disk_devt(md->disk)); - int devidx = MINOR(disk_devt(md->disk)) / perdev_minors; - - if (!devmaj) - devidx = md->disk->first_minor / perdev_minors; - + int devidx = mmc_get_devidx(md->disk); blk_cleanup_queue(md->queue.queue); __clear_bit(devidx, dev_use); @@ -118,6 +190,102 @@ static void mmc_blk_put(struct mmc_blk_data *md) mutex_unlock(&open_lock); } +static ssize_t power_ro_lock_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int ret; + struct mmc_blk_data *md = mmc_blk_get(dev_to_disk(dev)); + struct mmc_card *card = md->queue.card; + int locked = 0; + + if (card->ext_csd.boot_ro_lock & EXT_CSD_BOOT_WP_B_PERM_WP_EN) + locked = 2; + else if (card->ext_csd.boot_ro_lock & EXT_CSD_BOOT_WP_B_PWR_WP_EN) + locked = 1; + + ret = snprintf(buf, PAGE_SIZE, "%d\n", locked); + + return ret; +} + +static ssize_t power_ro_lock_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int ret; + struct mmc_blk_data *md, *part_md; + struct mmc_card *card; + unsigned long set; + + if (kstrtoul(buf, 0, &set)) + return -EINVAL; + + if (set != 1) + return count; + + md = mmc_blk_get(dev_to_disk(dev)); + card = md->queue.card; + + mmc_get_card(card); + + ret = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BOOT_WP, + card->ext_csd.boot_ro_lock | + EXT_CSD_BOOT_WP_B_PWR_WP_EN, + card->ext_csd.part_time); + if (ret) + pr_err("%s: Locking boot partition ro until next power on failed: %d\n", md->disk->disk_name, ret); + else + card->ext_csd.boot_ro_lock |= EXT_CSD_BOOT_WP_B_PWR_WP_EN; + + mmc_put_card(card); + + if (!ret) { + pr_info("%s: Locking boot partition ro until next power on\n", + md->disk->disk_name); + set_disk_ro(md->disk, 1); + + list_for_each_entry(part_md, &md->part, part) + if (part_md->area_type == MMC_BLK_DATA_AREA_BOOT) { + pr_info("%s: Locking boot partition ro until next power on\n", part_md->disk->disk_name); + set_disk_ro(part_md->disk, 1); + } + } + + mmc_blk_put(md); + return count; +} + +static ssize_t force_ro_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int ret; + struct mmc_blk_data *md = mmc_blk_get(dev_to_disk(dev)); + + ret = snprintf(buf, PAGE_SIZE, "%d", + get_disk_ro(dev_to_disk(dev)) ^ + md->read_only); + mmc_blk_put(md); + return ret; +} + +static ssize_t force_ro_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int ret; + char *end; + struct mmc_blk_data *md = mmc_blk_get(dev_to_disk(dev)); + unsigned long set = simple_strtoul(buf, &end, 0); + if (end == buf) { + ret = -EINVAL; + goto out; + } + + set_disk_ro(dev_to_disk(dev), set || md->read_only); + ret = count; +out: + mmc_blk_put(md); + return ret; +} + static int mmc_blk_open(struct block_device *bdev, fmode_t mode) { struct mmc_blk_data *md = mmc_blk_get(bdev->bd_disk); @@ -139,14 +307,13 @@ static int mmc_blk_open(struct block_device *bdev, fmode_t mode) return ret; } -static int mmc_blk_release(struct gendisk *disk, fmode_t mode) +static void mmc_blk_release(struct gendisk *disk, fmode_t mode) { struct mmc_blk_data *md = disk->private_data; mutex_lock(&block_mutex); mmc_blk_put(md); mutex_unlock(&block_mutex); - return 0; } static int @@ -158,19 +325,346 @@ mmc_blk_getgeo(struct block_device *bdev, struct hd_geometry *geo) return 0; } +struct mmc_blk_ioc_data { + struct mmc_ioc_cmd ic; + unsigned char *buf; + u64 buf_bytes; +}; + +static struct mmc_blk_ioc_data *mmc_blk_ioctl_copy_from_user( + struct mmc_ioc_cmd __user *user) +{ + struct mmc_blk_ioc_data *idata; + int err; + + idata = kzalloc(sizeof(*idata), GFP_KERNEL); + if (!idata) { + err = -ENOMEM; + goto out; + } + + if (copy_from_user(&idata->ic, user, sizeof(idata->ic))) { + err = -EFAULT; + goto idata_err; + } + + idata->buf_bytes = (u64) idata->ic.blksz * idata->ic.blocks; + if (idata->buf_bytes > MMC_IOC_MAX_BYTES) { + err = -EOVERFLOW; + goto idata_err; + } + + if (!idata->buf_bytes) + return idata; + + idata->buf = kzalloc(idata->buf_bytes, GFP_KERNEL); + if (!idata->buf) { + err = -ENOMEM; + goto idata_err; + } + + if (copy_from_user(idata->buf, (void __user *)(unsigned long) + idata->ic.data_ptr, idata->buf_bytes)) { + err = -EFAULT; + goto copy_err; + } + + return idata; + +copy_err: + kfree(idata->buf); +idata_err: + kfree(idata); +out: + return ERR_PTR(err); +} + +static int ioctl_rpmb_card_status_poll(struct mmc_card *card, u32 *status, + u32 retries_max) +{ + int err; + u32 retry_count = 0; + + if (!status || !retries_max) + return -EINVAL; + + do { + err = get_card_status(card, status, 5); + if (err) + break; + + if (!R1_STATUS(*status) && + (R1_CURRENT_STATE(*status) != R1_STATE_PRG)) + break; /* RPMB programming operation complete */ + + /* + * Rechedule to give the MMC device a chance to continue + * processing the previous command without being polled too + * frequently. + */ + usleep_range(1000, 5000); + } while (++retry_count < retries_max); + + if (retry_count == retries_max) + err = -EPERM; + + return err; +} + +static int ioctl_do_sanitize(struct mmc_card *card) +{ + int err; + + if (!mmc_can_sanitize(card)) { + pr_warn("%s: %s - SANITIZE is not supported\n", + mmc_hostname(card->host), __func__); + err = -EOPNOTSUPP; + goto out; + } + + pr_debug("%s: %s - SANITIZE IN PROGRESS...\n", + mmc_hostname(card->host), __func__); + + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_SANITIZE_START, 1, + MMC_SANITIZE_REQ_TIMEOUT); + + if (err) + pr_err("%s: %s - EXT_CSD_SANITIZE_START failed. err=%d\n", + mmc_hostname(card->host), __func__, err); + + pr_debug("%s: %s - SANITIZE COMPLETED\n", mmc_hostname(card->host), + __func__); +out: + return err; +} + +static int mmc_blk_ioctl_cmd(struct block_device *bdev, + struct mmc_ioc_cmd __user *ic_ptr) +{ + struct mmc_blk_ioc_data *idata; + struct mmc_blk_data *md; + struct mmc_card *card; + struct mmc_command cmd = {0}; + struct mmc_data data = {0}; + struct mmc_request mrq = {NULL}; + struct scatterlist sg; + int err; + int is_rpmb = false; + u32 status = 0; + + /* + * The caller must have CAP_SYS_RAWIO, and must be calling this on the + * whole block device, not on a partition. This prevents overspray + * between sibling partitions. + */ + if ((!capable(CAP_SYS_RAWIO)) || (bdev != bdev->bd_contains)) + return -EPERM; + + idata = mmc_blk_ioctl_copy_from_user(ic_ptr); + if (IS_ERR(idata)) + return PTR_ERR(idata); + + md = mmc_blk_get(bdev->bd_disk); + if (!md) { + err = -EINVAL; + goto cmd_err; + } + + if (md->area_type & MMC_BLK_DATA_AREA_RPMB) + is_rpmb = true; + + card = md->queue.card; + if (IS_ERR(card)) { + err = PTR_ERR(card); + goto cmd_done; + } + + cmd.opcode = idata->ic.opcode; + cmd.arg = idata->ic.arg; + cmd.flags = idata->ic.flags; + + if (idata->buf_bytes) { + data.sg = &sg; + data.sg_len = 1; + data.blksz = idata->ic.blksz; + data.blocks = idata->ic.blocks; + + sg_init_one(data.sg, idata->buf, idata->buf_bytes); + + if (idata->ic.write_flag) + data.flags = MMC_DATA_WRITE; + else + data.flags = MMC_DATA_READ; + + /* data.flags must already be set before doing this. */ + mmc_set_data_timeout(&data, card); + + /* Allow overriding the timeout_ns for empirical tuning. */ + if (idata->ic.data_timeout_ns) + data.timeout_ns = idata->ic.data_timeout_ns; + + if ((cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B) { + /* + * Pretend this is a data transfer and rely on the + * host driver to compute timeout. When all host + * drivers support cmd.cmd_timeout for R1B, this + * can be changed to: + * + * mrq.data = NULL; + * cmd.cmd_timeout = idata->ic.cmd_timeout_ms; + */ + data.timeout_ns = idata->ic.cmd_timeout_ms * 1000000; + } + + mrq.data = &data; + } + + mrq.cmd = &cmd; + + mmc_get_card(card); + + err = mmc_blk_part_switch(card, md); + if (err) + goto cmd_rel_host; + + if (idata->ic.is_acmd) { + err = mmc_app_cmd(card->host, card); + if (err) + goto cmd_rel_host; + } + + if (is_rpmb) { + err = mmc_set_blockcount(card, data.blocks, + idata->ic.write_flag & (1 << 31)); + if (err) + goto cmd_rel_host; + } + + if ((MMC_EXTRACT_INDEX_FROM_ARG(cmd.arg) == EXT_CSD_SANITIZE_START) && + (cmd.opcode == MMC_SWITCH)) { + err = ioctl_do_sanitize(card); + + if (err) + pr_err("%s: ioctl_do_sanitize() failed. err = %d", + __func__, err); + + goto cmd_rel_host; + } + + mmc_wait_for_req(card->host, &mrq); + + if (cmd.error) { + dev_err(mmc_dev(card->host), "%s: cmd error %d\n", + __func__, cmd.error); + err = cmd.error; + goto cmd_rel_host; + } + if (data.error) { + dev_err(mmc_dev(card->host), "%s: data error %d\n", + __func__, data.error); + err = data.error; + goto cmd_rel_host; + } + + /* + * According to the SD specs, some commands require a delay after + * issuing the command. + */ + if (idata->ic.postsleep_min_us) + usleep_range(idata->ic.postsleep_min_us, idata->ic.postsleep_max_us); + + if (copy_to_user(&(ic_ptr->response), cmd.resp, sizeof(cmd.resp))) { + err = -EFAULT; + goto cmd_rel_host; + } + + if (!idata->ic.write_flag) { + if (copy_to_user((void __user *)(unsigned long) idata->ic.data_ptr, + idata->buf, idata->buf_bytes)) { + err = -EFAULT; + goto cmd_rel_host; + } + } + + if (is_rpmb) { + /* + * Ensure RPMB command has completed by polling CMD13 + * "Send Status". + */ + err = ioctl_rpmb_card_status_poll(card, &status, 5); + if (err) + dev_err(mmc_dev(card->host), + "%s: Card Status=0x%08X, error %d\n", + __func__, status, err); + } + +cmd_rel_host: + mmc_put_card(card); + +cmd_done: + mmc_blk_put(md); +cmd_err: + kfree(idata->buf); + kfree(idata); + return err; +} + +static int mmc_blk_ioctl(struct block_device *bdev, fmode_t mode, + unsigned int cmd, unsigned long arg) +{ + int ret = -EINVAL; + if (cmd == MMC_IOC_CMD) + ret = mmc_blk_ioctl_cmd(bdev, (struct mmc_ioc_cmd __user *)arg); + return ret; +} + +#ifdef CONFIG_COMPAT +static int mmc_blk_compat_ioctl(struct block_device *bdev, fmode_t mode, + unsigned int cmd, unsigned long arg) +{ + return mmc_blk_ioctl(bdev, mode, cmd, (unsigned long) compat_ptr(arg)); +} +#endif + static const struct block_device_operations mmc_bdops = { .open = mmc_blk_open, .release = mmc_blk_release, .getgeo = mmc_blk_getgeo, .owner = THIS_MODULE, + .ioctl = mmc_blk_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = mmc_blk_compat_ioctl, +#endif }; -struct mmc_blk_request { - struct mmc_request mrq; - struct mmc_command cmd; - struct mmc_command stop; - struct mmc_data data; -}; +static inline int mmc_blk_part_switch(struct mmc_card *card, + struct mmc_blk_data *md) +{ + int ret; + struct mmc_blk_data *main_md = mmc_get_drvdata(card); + + if (main_md->part_curr == md->part_type) + return 0; + + if (mmc_card_mmc(card)) { + u8 part_config = card->ext_csd.part_config; + + part_config &= ~EXT_CSD_PART_CONFIG_ACC_MASK; + part_config |= md->part_type; + + ret = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_PART_CONFIG, part_config, + card->ext_csd.part_time); + if (ret) + return ret; + + card->ext_csd.part_config = part_config; + } + + main_md->part_curr = md->part_type; + return 0; +} static u32 mmc_sd_num_wr_blocks(struct mmc_card *card) { @@ -178,15 +672,12 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card) u32 result; __be32 *blocks; - struct mmc_request mrq; - struct mmc_command cmd; - struct mmc_data data; - unsigned int timeout_us; + struct mmc_request mrq = {NULL}; + struct mmc_command cmd = {0}; + struct mmc_data data = {0}; struct scatterlist sg; - memset(&cmd, 0, sizeof(struct mmc_command)); - cmd.opcode = MMC_APP_CMD; cmd.arg = card->rca << 16; cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; @@ -203,27 +694,12 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card) cmd.arg = 0; cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; - memset(&data, 0, sizeof(struct mmc_data)); - - data.timeout_ns = card->csd.tacc_ns * 100; - data.timeout_clks = card->csd.tacc_clks * 100; - - timeout_us = data.timeout_ns / 1000; - timeout_us += data.timeout_clks * 1000 / - (card->host->ios.clock / 1000); - - if (timeout_us > 100000) { - data.timeout_ns = 100000000; - data.timeout_clks = 0; - } - data.blksz = 4; data.blocks = 1; data.flags = MMC_DATA_READ; data.sg = &sg; data.sg_len = 1; - - memset(&mrq, 0, sizeof(struct mmc_request)); + mmc_set_data_timeout(&data, card); mrq.cmd = &cmd; mrq.data = &data; @@ -245,21 +721,308 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card) return result; } -static u32 get_card_status(struct mmc_card *card, struct request *req) +static int get_card_status(struct mmc_card *card, u32 *status, int retries) { - struct mmc_command cmd; + struct mmc_command cmd = {0}; int err; - memset(&cmd, 0, sizeof(struct mmc_command)); cmd.opcode = MMC_SEND_STATUS; if (!mmc_host_is_spi(card->host)) cmd.arg = card->rca << 16; cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC; - err = mmc_wait_for_cmd(card->host, &cmd, 0); + err = mmc_wait_for_cmd(card->host, &cmd, retries); + if (err == 0) + *status = cmd.resp[0]; + return err; +} + +static int card_busy_detect(struct mmc_card *card, unsigned int timeout_ms, + bool hw_busy_detect, struct request *req, int *gen_err) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms); + int err = 0; + u32 status; + + do { + err = get_card_status(card, &status, 5); + if (err) { + pr_err("%s: error %d requesting status\n", + req->rq_disk->disk_name, err); + return err; + } + + if (status & R1_ERROR) { + pr_err("%s: %s: error sending status cmd, status %#x\n", + req->rq_disk->disk_name, __func__, status); + *gen_err = 1; + } + + /* We may rely on the host hw to handle busy detection.*/ + if ((card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) && + hw_busy_detect) + break; + + /* + * Timeout if the device never becomes ready for data and never + * leaves the program state. + */ + if (time_after(jiffies, timeout)) { + pr_err("%s: Card stuck in programming state! %s %s\n", + mmc_hostname(card->host), + req->rq_disk->disk_name, __func__); + return -ETIMEDOUT; + } + + /* + * Some cards mishandle the status bits, + * so make sure to check both the busy + * indication and the card state. + */ + } while (!(status & R1_READY_FOR_DATA) || + (R1_CURRENT_STATE(status) == R1_STATE_PRG)); + + return err; +} + +static int send_stop(struct mmc_card *card, unsigned int timeout_ms, + struct request *req, int *gen_err, u32 *stop_status) +{ + struct mmc_host *host = card->host; + struct mmc_command cmd = {0}; + int err; + bool use_r1b_resp = rq_data_dir(req) == WRITE; + + /* + * Normally we use R1B responses for WRITE, but in cases where the host + * has specified a max_busy_timeout we need to validate it. A failure + * means we need to prevent the host from doing hw busy detection, which + * is done by converting to a R1 response instead. + */ + if (host->max_busy_timeout && (timeout_ms > host->max_busy_timeout)) + use_r1b_resp = false; + + cmd.opcode = MMC_STOP_TRANSMISSION; + if (use_r1b_resp) { + cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; + cmd.busy_timeout = timeout_ms; + } else { + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; + } + + err = mmc_wait_for_cmd(host, &cmd, 5); if (err) - printk(KERN_ERR "%s: error %d sending status comand", - req->rq_disk->disk_name, err); - return cmd.resp[0]; + return err; + + *stop_status = cmd.resp[0]; + + /* No need to check card status in case of READ. */ + if (rq_data_dir(req) == READ) + return 0; + + if (!mmc_host_is_spi(host) && + (*stop_status & R1_ERROR)) { + pr_err("%s: %s: general error sending stop command, resp %#x\n", + req->rq_disk->disk_name, __func__, *stop_status); + *gen_err = 1; + } + + return card_busy_detect(card, timeout_ms, use_r1b_resp, req, gen_err); +} + +#define ERR_NOMEDIUM 3 +#define ERR_RETRY 2 +#define ERR_ABORT 1 +#define ERR_CONTINUE 0 + +static int mmc_blk_cmd_error(struct request *req, const char *name, int error, + bool status_valid, u32 status) +{ + switch (error) { + case -EILSEQ: + /* response crc error, retry the r/w cmd */ + pr_err("%s: %s sending %s command, card status %#x\n", + req->rq_disk->disk_name, "response CRC error", + name, status); + return ERR_RETRY; + + case -ETIMEDOUT: + pr_err("%s: %s sending %s command, card status %#x\n", + req->rq_disk->disk_name, "timed out", name, status); + + /* If the status cmd initially failed, retry the r/w cmd */ + if (!status_valid) + return ERR_RETRY; + + /* + * If it was a r/w cmd crc error, or illegal command + * (eg, issued in wrong state) then retry - we should + * have corrected the state problem above. + */ + if (status & (R1_COM_CRC_ERROR | R1_ILLEGAL_COMMAND)) + return ERR_RETRY; + + /* Otherwise abort the command */ + return ERR_ABORT; + + default: + /* We don't understand the error code the driver gave us */ + pr_err("%s: unknown error %d sending read/write command, card status %#x\n", + req->rq_disk->disk_name, error, status); + return ERR_ABORT; + } +} + +/* + * Initial r/w and stop cmd error recovery. + * We don't know whether the card received the r/w cmd or not, so try to + * restore things back to a sane state. Essentially, we do this as follows: + * - Obtain card status. If the first attempt to obtain card status fails, + * the status word will reflect the failed status cmd, not the failed + * r/w cmd. If we fail to obtain card status, it suggests we can no + * longer communicate with the card. + * - Check the card state. If the card received the cmd but there was a + * transient problem with the response, it might still be in a data transfer + * mode. Try to send it a stop command. If this fails, we can't recover. + * - If the r/w cmd failed due to a response CRC error, it was probably + * transient, so retry the cmd. + * - If the r/w cmd timed out, but we didn't get the r/w cmd status, retry. + * - If the r/w cmd timed out, and the r/w cmd failed due to CRC error or + * illegal cmd, retry. + * Otherwise we don't understand what happened, so abort. + */ +static int mmc_blk_cmd_recovery(struct mmc_card *card, struct request *req, + struct mmc_blk_request *brq, int *ecc_err, int *gen_err) +{ + bool prev_cmd_status_valid = true; + u32 status, stop_status = 0; + int err, retry; + + if (mmc_card_removed(card)) + return ERR_NOMEDIUM; + + /* + * Try to get card status which indicates both the card state + * and why there was no response. If the first attempt fails, + * we can't be sure the returned status is for the r/w command. + */ + for (retry = 2; retry >= 0; retry--) { + err = get_card_status(card, &status, 0); + if (!err) + break; + + prev_cmd_status_valid = false; + pr_err("%s: error %d sending status command, %sing\n", + req->rq_disk->disk_name, err, retry ? "retry" : "abort"); + } + + /* We couldn't get a response from the card. Give up. */ + if (err) { + /* Check if the card is removed */ + if (mmc_detect_card_removed(card->host)) + return ERR_NOMEDIUM; + return ERR_ABORT; + } + + /* Flag ECC errors */ + if ((status & R1_CARD_ECC_FAILED) || + (brq->stop.resp[0] & R1_CARD_ECC_FAILED) || + (brq->cmd.resp[0] & R1_CARD_ECC_FAILED)) + *ecc_err = 1; + + /* Flag General errors */ + if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) + if ((status & R1_ERROR) || + (brq->stop.resp[0] & R1_ERROR)) { + pr_err("%s: %s: general error sending stop or status command, stop cmd response %#x, card status %#x\n", + req->rq_disk->disk_name, __func__, + brq->stop.resp[0], status); + *gen_err = 1; + } + + /* + * Check the current card state. If it is in some data transfer + * mode, tell it to stop (and hopefully transition back to TRAN.) + */ + if (R1_CURRENT_STATE(status) == R1_STATE_DATA || + R1_CURRENT_STATE(status) == R1_STATE_RCV) { + err = send_stop(card, + DIV_ROUND_UP(brq->data.timeout_ns, 1000000), + req, gen_err, &stop_status); + if (err) { + pr_err("%s: error %d sending stop command\n", + req->rq_disk->disk_name, err); + /* + * If the stop cmd also timed out, the card is probably + * not present, so abort. Other errors are bad news too. + */ + return ERR_ABORT; + } + + if (stop_status & R1_CARD_ECC_FAILED) + *ecc_err = 1; + } + + /* Check for set block count errors */ + if (brq->sbc.error) + return mmc_blk_cmd_error(req, "SET_BLOCK_COUNT", brq->sbc.error, + prev_cmd_status_valid, status); + + /* Check for r/w command errors */ + if (brq->cmd.error) + return mmc_blk_cmd_error(req, "r/w cmd", brq->cmd.error, + prev_cmd_status_valid, status); + + /* Data errors */ + if (!brq->stop.error) + return ERR_CONTINUE; + + /* Now for stop errors. These aren't fatal to the transfer. */ + pr_err("%s: error %d sending stop command, original cmd response %#x, card status %#x\n", + req->rq_disk->disk_name, brq->stop.error, + brq->cmd.resp[0], status); + + /* + * Subsitute in our own stop status as this will give the error + * state which happened during the execution of the r/w command. + */ + if (stop_status) { + brq->stop.resp[0] = stop_status; + brq->stop.error = 0; + } + return ERR_CONTINUE; +} + +static int mmc_blk_reset(struct mmc_blk_data *md, struct mmc_host *host, + int type) +{ + int err; + + if (md->reset_done & type) + return -EEXIST; + + md->reset_done |= type; + err = mmc_hw_reset(host); + /* Ensure we switch back to the correct partition */ + if (err != -EOPNOTSUPP) { + struct mmc_blk_data *main_md = mmc_get_drvdata(host->card); + int part_err; + + main_md->part_curr = main_md->part_type; + part_err = mmc_blk_part_switch(host->card, md); + if (part_err) { + /* + * We have failed to get back into the correct + * partition, so we need to abort the whole request. + */ + return -ENODEV; + } + } + return err; +} + +static inline void mmc_blk_reset_success(struct mmc_blk_data *md, int type) +{ + md->reset_done &= ~type; } static int mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req) @@ -267,9 +1030,7 @@ static int mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req) struct mmc_blk_data *md = mq->data; struct mmc_card *card = md->queue.card; unsigned int from, nr, arg; - int err = 0; - - mmc_claim_host(card->host); + int err = 0, type = MMC_BLK_DISCARD; if (!mmc_can_erase(card)) { err = -EOPNOTSUPP; @@ -279,18 +1040,30 @@ static int mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req) from = blk_rq_pos(req); nr = blk_rq_sectors(req); - if (mmc_can_trim(card)) + if (mmc_can_discard(card)) + arg = MMC_DISCARD_ARG; + else if (mmc_can_trim(card)) arg = MMC_TRIM_ARG; else arg = MMC_ERASE_ARG; - +retry: + if (card->quirks & MMC_QUIRK_INAND_CMD38) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + INAND_CMD38_ARG_EXT_CSD, + arg == MMC_TRIM_ARG ? + INAND_CMD38_ARG_TRIM : + INAND_CMD38_ARG_ERASE, + 0); + if (err) + goto out; + } err = mmc_erase(card, from, nr, arg); out: - spin_lock_irq(&md->lock); - __blk_end_request(req, err, blk_rq_bytes(req)); - spin_unlock_irq(&md->lock); - - mmc_release_host(card->host); + if (err == -EIO && !mmc_blk_reset(md, card->host, type)) + goto retry; + if (!err) + mmc_blk_reset_success(md, type); + blk_end_request(req, err, blk_rq_bytes(req)); return err ? 0 : 1; } @@ -301,11 +1074,9 @@ static int mmc_blk_issue_secdiscard_rq(struct mmc_queue *mq, struct mmc_blk_data *md = mq->data; struct mmc_card *card = md->queue.card; unsigned int from, nr, arg; - int err = 0; - - mmc_claim_host(card->host); + int err = 0, type = MMC_BLK_SECDISCARD; - if (!mmc_can_secure_erase_trim(card)) { + if (!(mmc_can_secure_erase_trim(card))) { err = -EOPNOTSUPP; goto out; } @@ -318,217 +1089,640 @@ static int mmc_blk_issue_secdiscard_rq(struct mmc_queue *mq, else arg = MMC_SECURE_ERASE_ARG; +retry: + if (card->quirks & MMC_QUIRK_INAND_CMD38) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + INAND_CMD38_ARG_EXT_CSD, + arg == MMC_SECURE_TRIM1_ARG ? + INAND_CMD38_ARG_SECTRIM1 : + INAND_CMD38_ARG_SECERASE, + 0); + if (err) + goto out_retry; + } + err = mmc_erase(card, from, nr, arg); - if (!err && arg == MMC_SECURE_TRIM1_ARG) + if (err == -EIO) + goto out_retry; + if (err) + goto out; + + if (arg == MMC_SECURE_TRIM1_ARG) { + if (card->quirks & MMC_QUIRK_INAND_CMD38) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + INAND_CMD38_ARG_EXT_CSD, + INAND_CMD38_ARG_SECTRIM2, + 0); + if (err) + goto out_retry; + } + err = mmc_erase(card, from, nr, MMC_SECURE_TRIM2_ARG); -out: - spin_lock_irq(&md->lock); - __blk_end_request(req, err, blk_rq_bytes(req)); - spin_unlock_irq(&md->lock); + if (err == -EIO) + goto out_retry; + if (err) + goto out; + } - mmc_release_host(card->host); +out_retry: + if (err && !mmc_blk_reset(md, card->host, type)) + goto retry; + if (!err) + mmc_blk_reset_success(md, type); +out: + blk_end_request(req, err, blk_rq_bytes(req)); return err ? 0 : 1; } -static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req) +static int mmc_blk_issue_flush(struct mmc_queue *mq, struct request *req) { struct mmc_blk_data *md = mq->data; struct mmc_card *card = md->queue.card; - struct mmc_blk_request brq; - int ret = 1, disable_multi = 0; + int ret = 0; - mmc_claim_host(card->host); + ret = mmc_flush_cache(card); + if (ret) + ret = -EIO; - do { - struct mmc_command cmd; - u32 readcmd, writecmd, status = 0; - - memset(&brq, 0, sizeof(struct mmc_blk_request)); - brq.mrq.cmd = &brq.cmd; - brq.mrq.data = &brq.data; - - brq.cmd.arg = blk_rq_pos(req); - if (!mmc_card_blockaddr(card)) - brq.cmd.arg <<= 9; - brq.cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; - brq.data.blksz = 512; - brq.stop.opcode = MMC_STOP_TRANSMISSION; - brq.stop.arg = 0; - brq.stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; - brq.data.blocks = blk_rq_sectors(req); + blk_end_request_all(req, ret); - /* - * The block layer doesn't support all sector count - * restrictions, so we need to be prepared for too big - * requests. - */ - if (brq.data.blocks > card->host->max_blk_count) - brq.data.blocks = card->host->max_blk_count; + return ret ? 0 : 1; +} - /* - * After a read error, we redo the request one sector at a time - * in order to accurately determine which sectors can be read - * successfully. - */ - if (disable_multi && brq.data.blocks > 1) - brq.data.blocks = 1; +/* + * Reformat current write as a reliable write, supporting + * both legacy and the enhanced reliable write MMC cards. + * In each transfer we'll handle only as much as a single + * reliable write can handle, thus finish the request in + * partial completions. + */ +static inline void mmc_apply_rel_rw(struct mmc_blk_request *brq, + struct mmc_card *card, + struct request *req) +{ + if (!(card->ext_csd.rel_param & EXT_CSD_WR_REL_PARAM_EN)) { + /* Legacy mode imposes restrictions on transfers. */ + if (!IS_ALIGNED(brq->cmd.arg, card->ext_csd.rel_sectors)) + brq->data.blocks = 1; + + if (brq->data.blocks > card->ext_csd.rel_sectors) + brq->data.blocks = card->ext_csd.rel_sectors; + else if (brq->data.blocks < card->ext_csd.rel_sectors) + brq->data.blocks = 1; + } +} - if (brq.data.blocks > 1) { - /* SPI multiblock writes terminate using a special - * token, not a STOP_TRANSMISSION request. - */ - if (!mmc_host_is_spi(card->host) - || rq_data_dir(req) == READ) - brq.mrq.stop = &brq.stop; - readcmd = MMC_READ_MULTIPLE_BLOCK; - writecmd = MMC_WRITE_MULTIPLE_BLOCK; - } else { - brq.mrq.stop = NULL; - readcmd = MMC_READ_SINGLE_BLOCK; - writecmd = MMC_WRITE_BLOCK; +#define CMD_ERRORS \ + (R1_OUT_OF_RANGE | /* Command argument out of range */ \ + R1_ADDRESS_ERROR | /* Misaligned address */ \ + R1_BLOCK_LEN_ERROR | /* Transferred block length incorrect */\ + R1_WP_VIOLATION | /* Tried to write to protected block */ \ + R1_CC_ERROR | /* Card controller error */ \ + R1_ERROR) /* General/unknown error */ + +static int mmc_blk_err_check(struct mmc_card *card, + struct mmc_async_req *areq) +{ + struct mmc_queue_req *mq_mrq = container_of(areq, struct mmc_queue_req, + mmc_active); + struct mmc_blk_request *brq = &mq_mrq->brq; + struct request *req = mq_mrq->req; + int ecc_err = 0, gen_err = 0; + + /* + * sbc.error indicates a problem with the set block count + * command. No data will have been transferred. + * + * cmd.error indicates a problem with the r/w command. No + * data will have been transferred. + * + * stop.error indicates a problem with the stop command. Data + * may have been transferred, or may still be transferring. + */ + if (brq->sbc.error || brq->cmd.error || brq->stop.error || + brq->data.error) { + switch (mmc_blk_cmd_recovery(card, req, brq, &ecc_err, &gen_err)) { + case ERR_RETRY: + return MMC_BLK_RETRY; + case ERR_ABORT: + return MMC_BLK_ABORT; + case ERR_NOMEDIUM: + return MMC_BLK_NOMEDIUM; + case ERR_CONTINUE: + break; } + } + + /* + * Check for errors relating to the execution of the + * initial command - such as address errors. No data + * has been transferred. + */ + if (brq->cmd.resp[0] & CMD_ERRORS) { + pr_err("%s: r/w command failed, status = %#x\n", + req->rq_disk->disk_name, brq->cmd.resp[0]); + return MMC_BLK_ABORT; + } + + /* + * Everything else is either success, or a data error of some + * kind. If it was a write, we may have transitioned to + * program mode, which we have to wait for it to complete. + */ + if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) { + int err; + + /* Check stop command response */ + if (brq->stop.resp[0] & R1_ERROR) { + pr_err("%s: %s: general error sending stop command, stop cmd response %#x\n", + req->rq_disk->disk_name, __func__, + brq->stop.resp[0]); + gen_err = 1; + } + + err = card_busy_detect(card, MMC_BLK_TIMEOUT_MS, false, req, + &gen_err); + if (err) + return MMC_BLK_CMD_ERR; + } + + /* if general error occurs, retry the write operation. */ + if (gen_err) { + pr_warn("%s: retrying write for general error\n", + req->rq_disk->disk_name); + return MMC_BLK_RETRY; + } + + if (brq->data.error) { + pr_err("%s: error %d transferring data, sector %u, nr %u, cmd response %#x, card status %#x\n", + req->rq_disk->disk_name, brq->data.error, + (unsigned)blk_rq_pos(req), + (unsigned)blk_rq_sectors(req), + brq->cmd.resp[0], brq->stop.resp[0]); + if (rq_data_dir(req) == READ) { - brq.cmd.opcode = readcmd; - brq.data.flags |= MMC_DATA_READ; + if (ecc_err) + return MMC_BLK_ECC_ERR; + return MMC_BLK_DATA_ERR; } else { - brq.cmd.opcode = writecmd; - brq.data.flags |= MMC_DATA_WRITE; + return MMC_BLK_CMD_ERR; } + } - mmc_set_data_timeout(&brq.data, card); + if (!brq->data.bytes_xfered) + return MMC_BLK_RETRY; - brq.data.sg = mq->sg; - brq.data.sg_len = mmc_queue_map_sg(mq); + if (mmc_packed_cmd(mq_mrq->cmd_type)) { + if (unlikely(brq->data.blocks << 9 != brq->data.bytes_xfered)) + return MMC_BLK_PARTIAL; + else + return MMC_BLK_SUCCESS; + } - /* - * Adjust the sg list so it is the same size as the - * request. - */ - if (brq.data.blocks != blk_rq_sectors(req)) { - int i, data_size = brq.data.blocks << 9; - struct scatterlist *sg; - - for_each_sg(brq.data.sg, sg, brq.data.sg_len, i) { - data_size -= sg->length; - if (data_size <= 0) { - sg->length += data_size; - i++; - break; - } + if (blk_rq_bytes(req) != brq->data.bytes_xfered) + return MMC_BLK_PARTIAL; + + return MMC_BLK_SUCCESS; +} + +static int mmc_blk_packed_err_check(struct mmc_card *card, + struct mmc_async_req *areq) +{ + struct mmc_queue_req *mq_rq = container_of(areq, struct mmc_queue_req, + mmc_active); + struct request *req = mq_rq->req; + struct mmc_packed *packed = mq_rq->packed; + int err, check, status; + u8 *ext_csd; + + BUG_ON(!packed); + + packed->retries--; + check = mmc_blk_err_check(card, areq); + err = get_card_status(card, &status, 0); + if (err) { + pr_err("%s: error %d sending status command\n", + req->rq_disk->disk_name, err); + return MMC_BLK_ABORT; + } + + if (status & R1_EXCEPTION_EVENT) { + ext_csd = kzalloc(512, GFP_KERNEL); + if (!ext_csd) { + pr_err("%s: unable to allocate buffer for ext_csd\n", + req->rq_disk->disk_name); + return -ENOMEM; + } + + err = mmc_send_ext_csd(card, ext_csd); + if (err) { + pr_err("%s: error %d sending ext_csd\n", + req->rq_disk->disk_name, err); + check = MMC_BLK_ABORT; + goto free; + } + + if ((ext_csd[EXT_CSD_EXP_EVENTS_STATUS] & + EXT_CSD_PACKED_FAILURE) && + (ext_csd[EXT_CSD_PACKED_CMD_STATUS] & + EXT_CSD_PACKED_GENERIC_ERROR)) { + if (ext_csd[EXT_CSD_PACKED_CMD_STATUS] & + EXT_CSD_PACKED_INDEXED_ERROR) { + packed->idx_failure = + ext_csd[EXT_CSD_PACKED_FAILURE_INDEX] - 1; + check = MMC_BLK_PARTIAL; } - brq.data.sg_len = i; + pr_err("%s: packed cmd failed, nr %u, sectors %u, " + "failure index: %d\n", + req->rq_disk->disk_name, packed->nr_entries, + packed->blocks, packed->idx_failure); } +free: + kfree(ext_csd); + } - mmc_queue_bounce_pre(mq); + return check; +} - mmc_wait_for_req(card->host, &brq.mrq); +static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, + struct mmc_card *card, + int disable_multi, + struct mmc_queue *mq) +{ + u32 readcmd, writecmd; + struct mmc_blk_request *brq = &mqrq->brq; + struct request *req = mqrq->req; + struct mmc_blk_data *md = mq->data; + bool do_data_tag; - mmc_queue_bounce_post(mq); + /* + * Reliable writes are used to implement Forced Unit Access and + * REQ_META accesses, and are supported only on MMCs. + * + * XXX: this really needs a good explanation of why REQ_META + * is treated special. + */ + bool do_rel_wr = ((req->cmd_flags & REQ_FUA) || + (req->cmd_flags & REQ_META)) && + (rq_data_dir(req) == WRITE) && + (md->flags & MMC_BLK_REL_WR); + + memset(brq, 0, sizeof(struct mmc_blk_request)); + brq->mrq.cmd = &brq->cmd; + brq->mrq.data = &brq->data; + + brq->cmd.arg = blk_rq_pos(req); + if (!mmc_card_blockaddr(card)) + brq->cmd.arg <<= 9; + brq->cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; + brq->data.blksz = 512; + brq->stop.opcode = MMC_STOP_TRANSMISSION; + brq->stop.arg = 0; + brq->data.blocks = blk_rq_sectors(req); + /* + * The block layer doesn't support all sector count + * restrictions, so we need to be prepared for too big + * requests. + */ + if (brq->data.blocks > card->host->max_blk_count) + brq->data.blocks = card->host->max_blk_count; + + if (brq->data.blocks > 1) { /* - * Check for errors here, but don't jump to cmd_err - * until later as we need to wait for the card to leave - * programming mode even when things go wrong. + * After a read error, we redo the request one sector + * at a time in order to accurately determine which + * sectors can be read successfully. */ - if (brq.cmd.error || brq.data.error || brq.stop.error) { - if (brq.data.blocks > 1 && rq_data_dir(req) == READ) { - /* Redo read one sector at a time */ - printk(KERN_WARNING "%s: retrying using single " - "block read\n", req->rq_disk->disk_name); - disable_multi = 1; - continue; + if (disable_multi) + brq->data.blocks = 1; + + /* Some controllers can't do multiblock reads due to hw bugs */ + if (card->host->caps2 & MMC_CAP2_NO_MULTI_READ && + rq_data_dir(req) == READ) + brq->data.blocks = 1; + } + + if (brq->data.blocks > 1 || do_rel_wr) { + /* SPI multiblock writes terminate using a special + * token, not a STOP_TRANSMISSION request. + */ + if (!mmc_host_is_spi(card->host) || + rq_data_dir(req) == READ) + brq->mrq.stop = &brq->stop; + readcmd = MMC_READ_MULTIPLE_BLOCK; + writecmd = MMC_WRITE_MULTIPLE_BLOCK; + } else { + brq->mrq.stop = NULL; + readcmd = MMC_READ_SINGLE_BLOCK; + writecmd = MMC_WRITE_BLOCK; + } + if (rq_data_dir(req) == READ) { + brq->cmd.opcode = readcmd; + brq->data.flags |= MMC_DATA_READ; + if (brq->mrq.stop) + brq->stop.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | + MMC_CMD_AC; + } else { + brq->cmd.opcode = writecmd; + brq->data.flags |= MMC_DATA_WRITE; + if (brq->mrq.stop) + brq->stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | + MMC_CMD_AC; + } + + if (do_rel_wr) + mmc_apply_rel_rw(brq, card, req); + + /* + * Data tag is used only during writing meta data to speed + * up write and any subsequent read of this meta data + */ + do_data_tag = (card->ext_csd.data_tag_unit_size) && + (req->cmd_flags & REQ_META) && + (rq_data_dir(req) == WRITE) && + ((brq->data.blocks * brq->data.blksz) >= + card->ext_csd.data_tag_unit_size); + + /* + * Pre-defined multi-block transfers are preferable to + * open ended-ones (and necessary for reliable writes). + * However, it is not sufficient to just send CMD23, + * and avoid the final CMD12, as on an error condition + * CMD12 (stop) needs to be sent anyway. This, coupled + * with Auto-CMD23 enhancements provided by some + * hosts, means that the complexity of dealing + * with this is best left to the host. If CMD23 is + * supported by card and host, we'll fill sbc in and let + * the host deal with handling it correctly. This means + * that for hosts that don't expose MMC_CAP_CMD23, no + * change of behavior will be observed. + * + * N.B: Some MMC cards experience perf degradation. + * We'll avoid using CMD23-bounded multiblock writes for + * these, while retaining features like reliable writes. + */ + if ((md->flags & MMC_BLK_CMD23) && mmc_op_multi(brq->cmd.opcode) && + (do_rel_wr || !(card->quirks & MMC_QUIRK_BLK_NO_CMD23) || + do_data_tag)) { + brq->sbc.opcode = MMC_SET_BLOCK_COUNT; + brq->sbc.arg = brq->data.blocks | + (do_rel_wr ? (1 << 31) : 0) | + (do_data_tag ? (1 << 29) : 0); + brq->sbc.flags = MMC_RSP_R1 | MMC_CMD_AC; + brq->mrq.sbc = &brq->sbc; + } + + mmc_set_data_timeout(&brq->data, card); + + brq->data.sg = mqrq->sg; + brq->data.sg_len = mmc_queue_map_sg(mq, mqrq); + + /* + * Adjust the sg list so it is the same size as the + * request. + */ + if (brq->data.blocks != blk_rq_sectors(req)) { + int i, data_size = brq->data.blocks << 9; + struct scatterlist *sg; + + for_each_sg(brq->data.sg, sg, brq->data.sg_len, i) { + data_size -= sg->length; + if (data_size <= 0) { + sg->length += data_size; + i++; + break; } - status = get_card_status(card, req); - } - - if (brq.cmd.error) { - printk(KERN_ERR "%s: error %d sending read/write " - "command, response %#x, card status %#x\n", - req->rq_disk->disk_name, brq.cmd.error, - brq.cmd.resp[0], status); - } - - if (brq.data.error) { - if (brq.data.error == -ETIMEDOUT && brq.mrq.stop) - /* 'Stop' response contains card status */ - status = brq.mrq.stop->resp[0]; - printk(KERN_ERR "%s: error %d transferring data," - " sector %u, nr %u, card status %#x\n", - req->rq_disk->disk_name, brq.data.error, - (unsigned)blk_rq_pos(req), - (unsigned)blk_rq_sectors(req), status); - } - - if (brq.stop.error) { - printk(KERN_ERR "%s: error %d sending stop command, " - "response %#x, card status %#x\n", - req->rq_disk->disk_name, brq.stop.error, - brq.stop.resp[0], status); - } - - if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) { - do { - int err; - - cmd.opcode = MMC_SEND_STATUS; - cmd.arg = card->rca << 16; - cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; - err = mmc_wait_for_cmd(card->host, &cmd, 5); - if (err) { - printk(KERN_ERR "%s: error %d requesting status\n", - req->rq_disk->disk_name, err); - goto cmd_err; - } - /* - * Some cards mishandle the status bits, - * so make sure to check both the busy - * indication and the card state. - */ - } while (!(cmd.resp[0] & R1_READY_FOR_DATA) || - (R1_CURRENT_STATE(cmd.resp[0]) == 7)); - -#if 0 - if (cmd.resp[0] & ~0x00000900) - printk(KERN_ERR "%s: status = %08x\n", - req->rq_disk->disk_name, cmd.resp[0]); - if (mmc_decode_status(cmd.resp)) - goto cmd_err; -#endif } + brq->data.sg_len = i; + } - if (brq.cmd.error || brq.stop.error || brq.data.error) { - if (rq_data_dir(req) == READ) { - /* - * After an error, we redo I/O one sector at a - * time, so we only reach here after trying to - * read a single sector. - */ - spin_lock_irq(&md->lock); - ret = __blk_end_request(req, -EIO, brq.data.blksz); - spin_unlock_irq(&md->lock); - continue; - } - goto cmd_err; + mqrq->mmc_active.mrq = &brq->mrq; + mqrq->mmc_active.err_check = mmc_blk_err_check; + + mmc_queue_bounce_pre(mqrq); +} + +static inline u8 mmc_calc_packed_hdr_segs(struct request_queue *q, + struct mmc_card *card) +{ + unsigned int hdr_sz = mmc_large_sector(card) ? 4096 : 512; + unsigned int max_seg_sz = queue_max_segment_size(q); + unsigned int len, nr_segs = 0; + + do { + len = min(hdr_sz, max_seg_sz); + hdr_sz -= len; + nr_segs++; + } while (hdr_sz); + + return nr_segs; +} + +static u8 mmc_blk_prep_packed_list(struct mmc_queue *mq, struct request *req) +{ + struct request_queue *q = mq->queue; + struct mmc_card *card = mq->card; + struct request *cur = req, *next = NULL; + struct mmc_blk_data *md = mq->data; + struct mmc_queue_req *mqrq = mq->mqrq_cur; + bool en_rel_wr = card->ext_csd.rel_param & EXT_CSD_WR_REL_PARAM_EN; + unsigned int req_sectors = 0, phys_segments = 0; + unsigned int max_blk_count, max_phys_segs; + bool put_back = true; + u8 max_packed_rw = 0; + u8 reqs = 0; + + if (!(md->flags & MMC_BLK_PACKED_CMD)) + goto no_packed; + + if ((rq_data_dir(cur) == WRITE) && + mmc_host_packed_wr(card->host)) + max_packed_rw = card->ext_csd.max_packed_writes; + + if (max_packed_rw == 0) + goto no_packed; + + if (mmc_req_rel_wr(cur) && + (md->flags & MMC_BLK_REL_WR) && !en_rel_wr) + goto no_packed; + + if (mmc_large_sector(card) && + !IS_ALIGNED(blk_rq_sectors(cur), 8)) + goto no_packed; + + mmc_blk_clear_packed(mqrq); + + max_blk_count = min(card->host->max_blk_count, + card->host->max_req_size >> 9); + if (unlikely(max_blk_count > 0xffff)) + max_blk_count = 0xffff; + + max_phys_segs = queue_max_segments(q); + req_sectors += blk_rq_sectors(cur); + phys_segments += cur->nr_phys_segments; + + if (rq_data_dir(cur) == WRITE) { + req_sectors += mmc_large_sector(card) ? 8 : 1; + phys_segments += mmc_calc_packed_hdr_segs(q, card); + } + + do { + if (reqs >= max_packed_rw - 1) { + put_back = false; + break; } - /* - * A block was successfully transferred. - */ - spin_lock_irq(&md->lock); - ret = __blk_end_request(req, 0, brq.data.bytes_xfered); - spin_unlock_irq(&md->lock); - } while (ret); + spin_lock_irq(q->queue_lock); + next = blk_fetch_request(q); + spin_unlock_irq(q->queue_lock); + if (!next) { + put_back = false; + break; + } - mmc_release_host(card->host); + if (mmc_large_sector(card) && + !IS_ALIGNED(blk_rq_sectors(next), 8)) + break; - return 1; + if (next->cmd_flags & REQ_DISCARD || + next->cmd_flags & REQ_FLUSH) + break; + + if (rq_data_dir(cur) != rq_data_dir(next)) + break; + + if (mmc_req_rel_wr(next) && + (md->flags & MMC_BLK_REL_WR) && !en_rel_wr) + break; + + req_sectors += blk_rq_sectors(next); + if (req_sectors > max_blk_count) + break; + + phys_segments += next->nr_phys_segments; + if (phys_segments > max_phys_segs) + break; + + list_add_tail(&next->queuelist, &mqrq->packed->list); + cur = next; + reqs++; + } while (1); + + if (put_back) { + spin_lock_irq(q->queue_lock); + blk_requeue_request(q, next); + spin_unlock_irq(q->queue_lock); + } + + if (reqs > 0) { + list_add(&req->queuelist, &mqrq->packed->list); + mqrq->packed->nr_entries = ++reqs; + mqrq->packed->retries = reqs; + return reqs; + } + +no_packed: + mqrq->cmd_type = MMC_PACKED_NONE; + return 0; +} + +static void mmc_blk_packed_hdr_wrq_prep(struct mmc_queue_req *mqrq, + struct mmc_card *card, + struct mmc_queue *mq) +{ + struct mmc_blk_request *brq = &mqrq->brq; + struct request *req = mqrq->req; + struct request *prq; + struct mmc_blk_data *md = mq->data; + struct mmc_packed *packed = mqrq->packed; + bool do_rel_wr, do_data_tag; + u32 *packed_cmd_hdr; + u8 hdr_blocks; + u8 i = 1; + + BUG_ON(!packed); + + mqrq->cmd_type = MMC_PACKED_WRITE; + packed->blocks = 0; + packed->idx_failure = MMC_PACKED_NR_IDX; + + packed_cmd_hdr = packed->cmd_hdr; + memset(packed_cmd_hdr, 0, sizeof(packed->cmd_hdr)); + packed_cmd_hdr[0] = (packed->nr_entries << 16) | + (PACKED_CMD_WR << 8) | PACKED_CMD_VER; + hdr_blocks = mmc_large_sector(card) ? 8 : 1; - cmd_err: - /* - * If this is an SD card and we're writing, we can first - * mark the known good sectors as ok. - * + /* + * Argument for each entry of packed group + */ + list_for_each_entry(prq, &packed->list, queuelist) { + do_rel_wr = mmc_req_rel_wr(prq) && (md->flags & MMC_BLK_REL_WR); + do_data_tag = (card->ext_csd.data_tag_unit_size) && + (prq->cmd_flags & REQ_META) && + (rq_data_dir(prq) == WRITE) && + ((brq->data.blocks * brq->data.blksz) >= + card->ext_csd.data_tag_unit_size); + /* Argument of CMD23 */ + packed_cmd_hdr[(i * 2)] = + (do_rel_wr ? MMC_CMD23_ARG_REL_WR : 0) | + (do_data_tag ? MMC_CMD23_ARG_TAG_REQ : 0) | + blk_rq_sectors(prq); + /* Argument of CMD18 or CMD25 */ + packed_cmd_hdr[((i * 2)) + 1] = + mmc_card_blockaddr(card) ? + blk_rq_pos(prq) : blk_rq_pos(prq) << 9; + packed->blocks += blk_rq_sectors(prq); + i++; + } + + memset(brq, 0, sizeof(struct mmc_blk_request)); + brq->mrq.cmd = &brq->cmd; + brq->mrq.data = &brq->data; + brq->mrq.sbc = &brq->sbc; + brq->mrq.stop = &brq->stop; + + brq->sbc.opcode = MMC_SET_BLOCK_COUNT; + brq->sbc.arg = MMC_CMD23_ARG_PACKED | (packed->blocks + hdr_blocks); + brq->sbc.flags = MMC_RSP_R1 | MMC_CMD_AC; + + brq->cmd.opcode = MMC_WRITE_MULTIPLE_BLOCK; + brq->cmd.arg = blk_rq_pos(req); + if (!mmc_card_blockaddr(card)) + brq->cmd.arg <<= 9; + brq->cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; + + brq->data.blksz = 512; + brq->data.blocks = packed->blocks + hdr_blocks; + brq->data.flags |= MMC_DATA_WRITE; + + brq->stop.opcode = MMC_STOP_TRANSMISSION; + brq->stop.arg = 0; + brq->stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; + + mmc_set_data_timeout(&brq->data, card); + + brq->data.sg = mqrq->sg; + brq->data.sg_len = mmc_queue_map_sg(mq, mqrq); + + mqrq->mmc_active.mrq = &brq->mrq; + mqrq->mmc_active.err_check = mmc_blk_packed_err_check; + + mmc_queue_bounce_pre(mqrq); +} + +static int mmc_blk_cmd_err(struct mmc_blk_data *md, struct mmc_card *card, + struct mmc_blk_request *brq, struct request *req, + int ret) +{ + struct mmc_queue_req *mq_rq; + mq_rq = container_of(brq, struct mmc_queue_req, brq); + + /* + * If this is an SD card and we're writing, we can first + * mark the known good sectors as ok. + * * If the card is not SD, we can still ok written sectors * as reported by the controller (which might be less than * the real number of written sectors, but never more). @@ -538,36 +1732,332 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req) blocks = mmc_sd_num_wr_blocks(card); if (blocks != (u32)-1) { - spin_lock_irq(&md->lock); - ret = __blk_end_request(req, 0, blocks << 9); - spin_unlock_irq(&md->lock); + ret = blk_end_request(req, 0, blocks << 9); } } else { - spin_lock_irq(&md->lock); - ret = __blk_end_request(req, 0, brq.data.bytes_xfered); - spin_unlock_irq(&md->lock); + if (!mmc_packed_cmd(mq_rq->cmd_type)) + ret = blk_end_request(req, 0, brq->data.bytes_xfered); } + return ret; +} - mmc_release_host(card->host); +static int mmc_blk_end_packed_req(struct mmc_queue_req *mq_rq) +{ + struct request *prq; + struct mmc_packed *packed = mq_rq->packed; + int idx = packed->idx_failure, i = 0; + int ret = 0; + + BUG_ON(!packed); + + while (!list_empty(&packed->list)) { + prq = list_entry_rq(packed->list.next); + if (idx == i) { + /* retry from error index */ + packed->nr_entries -= idx; + mq_rq->req = prq; + ret = 1; + + if (packed->nr_entries == MMC_PACKED_NR_SINGLE) { + list_del_init(&prq->queuelist); + mmc_blk_clear_packed(mq_rq); + } + return ret; + } + list_del_init(&prq->queuelist); + blk_end_request(prq, 0, blk_rq_bytes(prq)); + i++; + } + + mmc_blk_clear_packed(mq_rq); + return ret; +} + +static void mmc_blk_abort_packed_req(struct mmc_queue_req *mq_rq) +{ + struct request *prq; + struct mmc_packed *packed = mq_rq->packed; + + BUG_ON(!packed); + + while (!list_empty(&packed->list)) { + prq = list_entry_rq(packed->list.next); + list_del_init(&prq->queuelist); + blk_end_request(prq, -EIO, blk_rq_bytes(prq)); + } + + mmc_blk_clear_packed(mq_rq); +} + +static void mmc_blk_revert_packed_req(struct mmc_queue *mq, + struct mmc_queue_req *mq_rq) +{ + struct request *prq; + struct request_queue *q = mq->queue; + struct mmc_packed *packed = mq_rq->packed; + + BUG_ON(!packed); + + while (!list_empty(&packed->list)) { + prq = list_entry_rq(packed->list.prev); + if (prq->queuelist.prev != &packed->list) { + list_del_init(&prq->queuelist); + spin_lock_irq(q->queue_lock); + blk_requeue_request(mq->queue, prq); + spin_unlock_irq(q->queue_lock); + } else { + list_del_init(&prq->queuelist); + } + } + + mmc_blk_clear_packed(mq_rq); +} + +static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc) +{ + struct mmc_blk_data *md = mq->data; + struct mmc_card *card = md->queue.card; + struct mmc_blk_request *brq = &mq->mqrq_cur->brq; + int ret = 1, disable_multi = 0, retry = 0, type; + enum mmc_blk_status status; + struct mmc_queue_req *mq_rq; + struct request *req = rqc; + struct mmc_async_req *areq; + const u8 packed_nr = 2; + u8 reqs = 0; + + if (!rqc && !mq->mqrq_prev->req) + return 0; + + if (rqc) + reqs = mmc_blk_prep_packed_list(mq, rqc); + + do { + if (rqc) { + /* + * When 4KB native sector is enabled, only 8 blocks + * multiple read or write is allowed + */ + if ((brq->data.blocks & 0x07) && + (card->ext_csd.data_sector_size == 4096)) { + pr_err("%s: Transfer size is not 4KB sector size aligned\n", + req->rq_disk->disk_name); + mq_rq = mq->mqrq_cur; + goto cmd_abort; + } + + if (reqs >= packed_nr) + mmc_blk_packed_hdr_wrq_prep(mq->mqrq_cur, + card, mq); + else + mmc_blk_rw_rq_prep(mq->mqrq_cur, card, 0, mq); + areq = &mq->mqrq_cur->mmc_active; + } else + areq = NULL; + areq = mmc_start_req(card->host, areq, (int *) &status); + if (!areq) { + if (status == MMC_BLK_NEW_REQUEST) + mq->flags |= MMC_QUEUE_NEW_REQUEST; + return 0; + } + + mq_rq = container_of(areq, struct mmc_queue_req, mmc_active); + brq = &mq_rq->brq; + req = mq_rq->req; + type = rq_data_dir(req) == READ ? MMC_BLK_READ : MMC_BLK_WRITE; + mmc_queue_bounce_post(mq_rq); + + switch (status) { + case MMC_BLK_SUCCESS: + case MMC_BLK_PARTIAL: + /* + * A block was successfully transferred. + */ + mmc_blk_reset_success(md, type); + + if (mmc_packed_cmd(mq_rq->cmd_type)) { + ret = mmc_blk_end_packed_req(mq_rq); + break; + } else { + ret = blk_end_request(req, 0, + brq->data.bytes_xfered); + } + + /* + * If the blk_end_request function returns non-zero even + * though all data has been transferred and no errors + * were returned by the host controller, it's a bug. + */ + if (status == MMC_BLK_SUCCESS && ret) { + pr_err("%s BUG rq_tot %d d_xfer %d\n", + __func__, blk_rq_bytes(req), + brq->data.bytes_xfered); + rqc = NULL; + goto cmd_abort; + } + break; + case MMC_BLK_CMD_ERR: + ret = mmc_blk_cmd_err(md, card, brq, req, ret); + if (!mmc_blk_reset(md, card->host, type)) + break; + goto cmd_abort; + case MMC_BLK_RETRY: + if (retry++ < 5) + break; + /* Fall through */ + case MMC_BLK_ABORT: + if (!mmc_blk_reset(md, card->host, type)) + break; + goto cmd_abort; + case MMC_BLK_DATA_ERR: { + int err; + + err = mmc_blk_reset(md, card->host, type); + if (!err) + break; + if (err == -ENODEV || + mmc_packed_cmd(mq_rq->cmd_type)) + goto cmd_abort; + /* Fall through */ + } + case MMC_BLK_ECC_ERR: + if (brq->data.blocks > 1) { + /* Redo read one sector at a time */ + pr_warning("%s: retrying using single block read\n", + req->rq_disk->disk_name); + disable_multi = 1; + break; + } + /* + * After an error, we redo I/O one sector at a + * time, so we only reach here after trying to + * read a single sector. + */ + ret = blk_end_request(req, -EIO, + brq->data.blksz); + if (!ret) + goto start_new_req; + break; + case MMC_BLK_NOMEDIUM: + goto cmd_abort; + default: + pr_err("%s: Unhandled return value (%d)", + req->rq_disk->disk_name, status); + goto cmd_abort; + } - spin_lock_irq(&md->lock); - while (ret) - ret = __blk_end_request(req, -EIO, blk_rq_cur_bytes(req)); - spin_unlock_irq(&md->lock); + if (ret) { + if (mmc_packed_cmd(mq_rq->cmd_type)) { + if (!mq_rq->packed->retries) + goto cmd_abort; + mmc_blk_packed_hdr_wrq_prep(mq_rq, card, mq); + mmc_start_req(card->host, + &mq_rq->mmc_active, NULL); + } else { + + /* + * In case of a incomplete request + * prepare it again and resend. + */ + mmc_blk_rw_rq_prep(mq_rq, card, + disable_multi, mq); + mmc_start_req(card->host, + &mq_rq->mmc_active, NULL); + } + } + } while (ret); + + return 1; + + cmd_abort: + if (mmc_packed_cmd(mq_rq->cmd_type)) { + mmc_blk_abort_packed_req(mq_rq); + } else { + if (mmc_card_removed(card)) + req->cmd_flags |= REQ_QUIET; + while (ret) + ret = blk_end_request(req, -EIO, + blk_rq_cur_bytes(req)); + } + + start_new_req: + if (rqc) { + if (mmc_card_removed(card)) { + rqc->cmd_flags |= REQ_QUIET; + blk_end_request_all(rqc, -EIO); + } else { + /* + * If current request is packed, it needs to put back. + */ + if (mmc_packed_cmd(mq->mqrq_cur->cmd_type)) + mmc_blk_revert_packed_req(mq, mq->mqrq_cur); + + mmc_blk_rw_rq_prep(mq->mqrq_cur, card, 0, mq); + mmc_start_req(card->host, + &mq->mqrq_cur->mmc_active, NULL); + } + } return 0; } static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) { - if (req->cmd_flags & REQ_DISCARD) { - if (req->cmd_flags & REQ_SECURE) - return mmc_blk_issue_secdiscard_rq(mq, req); + int ret; + struct mmc_blk_data *md = mq->data; + struct mmc_card *card = md->queue.card; + struct mmc_host *host = card->host; + unsigned long flags; + unsigned int cmd_flags = req ? req->cmd_flags : 0; + + if (req && !mq->mqrq_prev->req) + /* claim host only for the first request */ + mmc_get_card(card); + + ret = mmc_blk_part_switch(card, md); + if (ret) { + if (req) { + blk_end_request_all(req, -EIO); + } + ret = 0; + goto out; + } + + mq->flags &= ~MMC_QUEUE_NEW_REQUEST; + if (cmd_flags & REQ_DISCARD) { + /* complete ongoing async transfer before issuing discard */ + if (card->host->areq) + mmc_blk_issue_rw_rq(mq, NULL); + if (req->cmd_flags & REQ_SECURE && + !(card->quirks & MMC_QUIRK_SEC_ERASE_TRIM_BROKEN)) + ret = mmc_blk_issue_secdiscard_rq(mq, req); else - return mmc_blk_issue_discard_rq(mq, req); + ret = mmc_blk_issue_discard_rq(mq, req); + } else if (cmd_flags & REQ_FLUSH) { + /* complete ongoing async transfer before issuing flush */ + if (card->host->areq) + mmc_blk_issue_rw_rq(mq, NULL); + ret = mmc_blk_issue_flush(mq, req); } else { - return mmc_blk_issue_rw_rq(mq, req); + if (!req && host->areq) { + spin_lock_irqsave(&host->context_info.lock, flags); + host->context_info.is_waiting_last_req = true; + spin_unlock_irqrestore(&host->context_info.lock, flags); + } + ret = mmc_blk_issue_rw_rq(mq, req); } + +out: + if ((!req && !(mq->flags & MMC_QUEUE_NEW_REQUEST)) || + (cmd_flags & MMC_REQ_SPECIAL_MASK)) + /* + * Release host when there are no more requests + * and after special request(discard, flush) is done. + * In case sepecial request, there is no reentry to + * the 'mmc_blk_issue_rq' with 'mqrq_prev->req'. + */ + mmc_put_card(card); + return ret; } static inline int mmc_blk_readonly(struct mmc_card *card) @@ -576,7 +2066,12 @@ static inline int mmc_blk_readonly(struct mmc_card *card) !(card->csd.cmdclass & CCC_BLOCK_WRITE); } -static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card) +static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card, + struct device *parent, + sector_t size, + bool default_ro, + const char *subname, + int area_type) { struct mmc_blk_data *md; int devidx, ret; @@ -592,6 +2087,20 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card) goto out; } + /* + * !subname implies we are creating main mmc_blk_data that will be + * associated with mmc_card with mmc_set_drvdata. Due to device + * partitions, devidx will not coincide with a per-physical card + * index anymore so we keep track of a name index. + */ + if (!subname) { + md->name_idx = find_first_zero_bit(name_use, max_devices); + __set_bit(md->name_idx, name_use); + } else + md->name_idx = ((struct mmc_blk_data *) + dev_to_disk(parent)->private_data)->name_idx; + + md->area_type = area_type; /* * Set the read-only status based on the supported commands @@ -606,9 +2115,10 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card) } spin_lock_init(&md->lock); + INIT_LIST_HEAD(&md->part); md->usage = 1; - ret = mmc_init_queue(&md->queue, card, &md->lock); + ret = mmc_init_queue(&md->queue, card, &md->lock, subname); if (ret) goto err_putdisk; @@ -620,7 +2130,10 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card) md->disk->fops = &mmc_bdops; md->disk->private_data = md; md->disk->queue = md->queue.queue; - md->disk->driverfs_dev = &card->dev; + md->disk->driverfs_dev = parent; + set_disk_ro(md->disk, md->read_only || default_ro); + if (area_type & MMC_BLK_DATA_AREA_RPMB) + md->disk->flags |= GENHD_FL_NO_PART_SCAN; /* * As discussed on lkml, GENHD_FL_REMOVABLE should: @@ -635,56 +2148,282 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card) */ snprintf(md->disk->disk_name, sizeof(md->disk->disk_name), - "mmcblk%d", devidx); + "mmcblk%d%s", md->name_idx, subname ? subname : ""); + + if (mmc_card_mmc(card)) + blk_queue_logical_block_size(md->queue.queue, + card->ext_csd.data_sector_size); + else + blk_queue_logical_block_size(md->queue.queue, 512); + + set_capacity(md->disk, size); + + if (mmc_host_cmd23(card->host)) { + if (mmc_card_mmc(card) || + (mmc_card_sd(card) && + card->scr.cmds & SD_SCR_CMD23_SUPPORT)) + md->flags |= MMC_BLK_CMD23; + } - blk_queue_logical_block_size(md->queue.queue, 512); + if (mmc_card_mmc(card) && + md->flags & MMC_BLK_CMD23 && + ((card->ext_csd.rel_param & EXT_CSD_WR_REL_PARAM_EN) || + card->ext_csd.rel_sectors)) { + md->flags |= MMC_BLK_REL_WR; + blk_queue_flush(md->queue.queue, REQ_FLUSH | REQ_FUA); + } + + if (mmc_card_mmc(card) && + (area_type == MMC_BLK_DATA_AREA_MAIN) && + (md->flags & MMC_BLK_CMD23) && + card->ext_csd.packed_event_en) { + if (!mmc_packed_init(&md->queue, card)) + md->flags |= MMC_BLK_PACKED_CMD; + } + + return md; + + err_putdisk: + put_disk(md->disk); + err_kfree: + kfree(md); + out: + return ERR_PTR(ret); +} + +static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card) +{ + sector_t size; + struct mmc_blk_data *md; if (!mmc_card_sd(card) && mmc_card_blockaddr(card)) { /* * The EXT_CSD sector count is in number or 512 byte * sectors. */ - set_capacity(md->disk, card->ext_csd.sectors); + size = card->ext_csd.sectors; } else { /* * The CSD capacity field is in units of read_blkbits. * set_capacity takes units of 512 bytes. */ - set_capacity(md->disk, - card->csd.capacity << (card->csd.read_blkbits - 9)); + size = card->csd.capacity << (card->csd.read_blkbits - 9); } + + md = mmc_blk_alloc_req(card, &card->dev, size, false, NULL, + MMC_BLK_DATA_AREA_MAIN); return md; +} - err_putdisk: - put_disk(md->disk); - err_kfree: - kfree(md); - out: - return ERR_PTR(ret); +static int mmc_blk_alloc_part(struct mmc_card *card, + struct mmc_blk_data *md, + unsigned int part_type, + sector_t size, + bool default_ro, + const char *subname, + int area_type) +{ + char cap_str[10]; + struct mmc_blk_data *part_md; + + part_md = mmc_blk_alloc_req(card, disk_to_dev(md->disk), size, default_ro, + subname, area_type); + if (IS_ERR(part_md)) + return PTR_ERR(part_md); + part_md->part_type = part_type; + list_add(&part_md->part, &md->part); + + string_get_size((u64)get_capacity(part_md->disk) << 9, STRING_UNITS_2, + cap_str, sizeof(cap_str)); + pr_info("%s: %s %s partition %u %s\n", + part_md->disk->disk_name, mmc_card_id(card), + mmc_card_name(card), part_md->part_type, cap_str); + return 0; } -static int -mmc_blk_set_blksize(struct mmc_blk_data *md, struct mmc_card *card) +/* MMC Physical partitions consist of two boot partitions and + * up to four general purpose partitions. + * For each partition enabled in EXT_CSD a block device will be allocatedi + * to provide access to the partition. + */ + +static int mmc_blk_alloc_parts(struct mmc_card *card, struct mmc_blk_data *md) { - int err; + int idx, ret = 0; + + if (!mmc_card_mmc(card)) + return 0; + + for (idx = 0; idx < card->nr_parts; idx++) { + if (card->part[idx].size) { + ret = mmc_blk_alloc_part(card, md, + card->part[idx].part_cfg, + card->part[idx].size >> 9, + card->part[idx].force_ro, + card->part[idx].name, + card->part[idx].area_type); + if (ret) + return ret; + } + } - mmc_claim_host(card->host); - err = mmc_set_blocklen(card, 512); - mmc_release_host(card->host); + return ret; +} - if (err) { - printk(KERN_ERR "%s: unable to set block size to 512: %d\n", - md->disk->disk_name, err); - return -EINVAL; +static void mmc_blk_remove_req(struct mmc_blk_data *md) +{ + struct mmc_card *card; + + if (md) { + /* + * Flush remaining requests and free queues. It + * is freeing the queue that stops new requests + * from being accepted. + */ + card = md->queue.card; + mmc_cleanup_queue(&md->queue); + if (md->flags & MMC_BLK_PACKED_CMD) + mmc_packed_clean(&md->queue); + if (md->disk->flags & GENHD_FL_UP) { + device_remove_file(disk_to_dev(md->disk), &md->force_ro); + if ((md->area_type & MMC_BLK_DATA_AREA_BOOT) && + card->ext_csd.boot_ro_lockable) + device_remove_file(disk_to_dev(md->disk), + &md->power_ro_lock); + + del_gendisk(md->disk); + } + mmc_blk_put(md); } +} - return 0; +static void mmc_blk_remove_parts(struct mmc_card *card, + struct mmc_blk_data *md) +{ + struct list_head *pos, *q; + struct mmc_blk_data *part_md; + + __clear_bit(md->name_idx, name_use); + list_for_each_safe(pos, q, &md->part) { + part_md = list_entry(pos, struct mmc_blk_data, part); + list_del(pos); + mmc_blk_remove_req(part_md); + } +} + +static int mmc_add_disk(struct mmc_blk_data *md) +{ + int ret; + struct mmc_card *card = md->queue.card; + + add_disk(md->disk); + md->force_ro.show = force_ro_show; + md->force_ro.store = force_ro_store; + sysfs_attr_init(&md->force_ro.attr); + md->force_ro.attr.name = "force_ro"; + md->force_ro.attr.mode = S_IRUGO | S_IWUSR; + ret = device_create_file(disk_to_dev(md->disk), &md->force_ro); + if (ret) + goto force_ro_fail; + + if ((md->area_type & MMC_BLK_DATA_AREA_BOOT) && + card->ext_csd.boot_ro_lockable) { + umode_t mode; + + if (card->ext_csd.boot_ro_lock & EXT_CSD_BOOT_WP_B_PWR_WP_DIS) + mode = S_IRUGO; + else + mode = S_IRUGO | S_IWUSR; + + md->power_ro_lock.show = power_ro_lock_show; + md->power_ro_lock.store = power_ro_lock_store; + sysfs_attr_init(&md->power_ro_lock.attr); + md->power_ro_lock.attr.mode = mode; + md->power_ro_lock.attr.name = + "ro_lock_until_next_power_on"; + ret = device_create_file(disk_to_dev(md->disk), + &md->power_ro_lock); + if (ret) + goto power_ro_lock_fail; + } + return ret; + +power_ro_lock_fail: + device_remove_file(disk_to_dev(md->disk), &md->force_ro); +force_ro_fail: + del_gendisk(md->disk); + + return ret; } +#define CID_MANFID_SANDISK 0x2 +#define CID_MANFID_TOSHIBA 0x11 +#define CID_MANFID_MICRON 0x13 +#define CID_MANFID_SAMSUNG 0x15 + +static const struct mmc_fixup blk_fixups[] = +{ + MMC_FIXUP("SEM02G", CID_MANFID_SANDISK, 0x100, add_quirk, + MMC_QUIRK_INAND_CMD38), + MMC_FIXUP("SEM04G", CID_MANFID_SANDISK, 0x100, add_quirk, + MMC_QUIRK_INAND_CMD38), + MMC_FIXUP("SEM08G", CID_MANFID_SANDISK, 0x100, add_quirk, + MMC_QUIRK_INAND_CMD38), + MMC_FIXUP("SEM16G", CID_MANFID_SANDISK, 0x100, add_quirk, + MMC_QUIRK_INAND_CMD38), + MMC_FIXUP("SEM32G", CID_MANFID_SANDISK, 0x100, add_quirk, + MMC_QUIRK_INAND_CMD38), + + /* + * Some MMC cards experience performance degradation with CMD23 + * instead of CMD12-bounded multiblock transfers. For now we'll + * black list what's bad... + * - Certain Toshiba cards. + * + * N.B. This doesn't affect SD cards. + */ + MMC_FIXUP("MMC08G", CID_MANFID_TOSHIBA, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_BLK_NO_CMD23), + MMC_FIXUP("MMC16G", CID_MANFID_TOSHIBA, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_BLK_NO_CMD23), + MMC_FIXUP("MMC32G", CID_MANFID_TOSHIBA, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_BLK_NO_CMD23), + + /* + * Some Micron MMC cards needs longer data read timeout than + * indicated in CSD. + */ + MMC_FIXUP(CID_NAME_ANY, CID_MANFID_MICRON, 0x200, add_quirk_mmc, + MMC_QUIRK_LONG_READ_TIME), + + /* + * On these Samsung MoviNAND parts, performing secure erase or + * secure trim can result in unrecoverable corruption due to a + * firmware bug. + */ + MMC_FIXUP("M8G2FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("MAG4FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("MBG8FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("MCGAFA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("VAL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("VYL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("KYL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("VZL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + + END_FIXUP +}; + static int mmc_blk_probe(struct mmc_card *card) { - struct mmc_blk_data *md; - int err; + struct mmc_blk_data *md, *part_md; char cap_str[10]; /* @@ -697,61 +2436,102 @@ static int mmc_blk_probe(struct mmc_card *card) if (IS_ERR(md)) return PTR_ERR(md); - err = mmc_blk_set_blksize(md, card); - if (err) - goto out; - string_get_size((u64)get_capacity(md->disk) << 9, STRING_UNITS_2, cap_str, sizeof(cap_str)); - printk(KERN_INFO "%s: %s %s %s %s\n", + pr_info("%s: %s %s %s %s\n", md->disk->disk_name, mmc_card_id(card), mmc_card_name(card), cap_str, md->read_only ? "(ro)" : ""); + if (mmc_blk_alloc_parts(card, md)) + goto out; + mmc_set_drvdata(card, md); - add_disk(md->disk); + mmc_fixup_device(card, blk_fixups); + + if (mmc_add_disk(md)) + goto out; + + list_for_each_entry(part_md, &md->part, part) { + if (mmc_add_disk(part_md)) + goto out; + } + + pm_runtime_set_autosuspend_delay(&card->dev, 3000); + pm_runtime_use_autosuspend(&card->dev); + + /* + * Don't enable runtime PM for SD-combo cards here. Leave that + * decision to be taken during the SDIO init sequence instead. + */ + if (card->type != MMC_TYPE_SD_COMBO) { + pm_runtime_set_active(&card->dev); + pm_runtime_enable(&card->dev); + } + return 0; out: - mmc_cleanup_queue(&md->queue); - mmc_blk_put(md); - - return err; + mmc_blk_remove_parts(card, md); + mmc_blk_remove_req(md); + return 0; } static void mmc_blk_remove(struct mmc_card *card) { struct mmc_blk_data *md = mmc_get_drvdata(card); - if (md) { - /* Stop new requests from getting into the queue */ - del_gendisk(md->disk); - - /* Then flush out any already in there */ - mmc_cleanup_queue(&md->queue); - - mmc_blk_put(md); - } + mmc_blk_remove_parts(card, md); + pm_runtime_get_sync(&card->dev); + mmc_claim_host(card->host); + mmc_blk_part_switch(card, md); + mmc_release_host(card->host); + if (card->type != MMC_TYPE_SD_COMBO) + pm_runtime_disable(&card->dev); + pm_runtime_put_noidle(&card->dev); + mmc_blk_remove_req(md); mmc_set_drvdata(card, NULL); } -#ifdef CONFIG_PM -static int mmc_blk_suspend(struct mmc_card *card, pm_message_t state) +static int _mmc_blk_suspend(struct mmc_card *card) { + struct mmc_blk_data *part_md; struct mmc_blk_data *md = mmc_get_drvdata(card); if (md) { mmc_queue_suspend(&md->queue); + list_for_each_entry(part_md, &md->part, part) { + mmc_queue_suspend(&part_md->queue); + } } return 0; } +static void mmc_blk_shutdown(struct mmc_card *card) +{ + _mmc_blk_suspend(card); +} + +#ifdef CONFIG_PM +static int mmc_blk_suspend(struct mmc_card *card) +{ + return _mmc_blk_suspend(card); +} + static int mmc_blk_resume(struct mmc_card *card) { + struct mmc_blk_data *part_md; struct mmc_blk_data *md = mmc_get_drvdata(card); if (md) { - mmc_blk_set_blksize(md, card); + /* + * Resume involves the card going into idle state, + * so current partition is always the main one. + */ + md->part_curr = md->part_type; mmc_queue_resume(&md->queue); + list_for_each_entry(part_md, &md->part, part) { + mmc_queue_resume(&part_md->queue); + } } return 0; } @@ -768,6 +2548,7 @@ static struct mmc_driver mmc_driver = { .remove = mmc_blk_remove, .suspend = mmc_blk_suspend, .resume = mmc_blk_resume, + .shutdown = mmc_blk_shutdown, }; static int __init mmc_blk_init(void) diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c index 21adc27f413..0c0fc52d42c 100644 --- a/drivers/mmc/card/mmc_test.c +++ b/drivers/mmc/card/mmc_test.c @@ -22,6 +22,7 @@ #include <linux/debugfs.h> #include <linux/uaccess.h> #include <linux/seq_file.h> +#include <linux/module.h> #define RESULT_OK 0 #define RESULT_FAIL 1 @@ -88,6 +89,7 @@ struct mmc_test_area { * @sectors: amount of sectors to check in one group * @ts: time values of transfer * @rate: calculated transfer rate + * @iops: I/O operations per second (times 100) */ struct mmc_test_transfer_result { struct list_head link; @@ -95,6 +97,7 @@ struct mmc_test_transfer_result { unsigned int sectors; struct timespec ts; unsigned int rate; + unsigned int iops; }; /** @@ -146,6 +149,27 @@ struct mmc_test_card { struct mmc_test_general_result *gr; }; +enum mmc_test_prep_media { + MMC_TEST_PREP_NONE = 0, + MMC_TEST_PREP_WRITE_FULL = 1 << 0, + MMC_TEST_PREP_ERASE = 1 << 1, +}; + +struct mmc_test_multiple_rw { + unsigned int *sg_len; + unsigned int *bs; + unsigned int len; + unsigned int size; + bool do_write; + bool do_nonblock_req; + enum mmc_test_prep_media prepare; +}; + +struct mmc_test_async_req { + struct mmc_async_req areq; + struct mmc_test_card *test; +}; + /*******************************************************************/ /* General helper functions */ /*******************************************************************/ @@ -201,7 +225,7 @@ static void mmc_test_prepare_mrq(struct mmc_test_card *test, static int mmc_test_busy(struct mmc_command *cmd) { return !(cmd->resp[0] & R1_READY_FOR_DATA) || - (R1_CURRENT_STATE(cmd->resp[0]) == 7); + (R1_CURRENT_STATE(cmd->resp[0]) == R1_STATE_PRG); } /* @@ -210,7 +234,7 @@ static int mmc_test_busy(struct mmc_command *cmd) static int mmc_test_wait_busy(struct mmc_test_card *test) { int ret, busy; - struct mmc_command cmd; + struct mmc_command cmd = {0}; busy = 0; do { @@ -226,9 +250,10 @@ static int mmc_test_wait_busy(struct mmc_test_card *test) if (!busy && mmc_test_busy(&cmd)) { busy = 1; - printk(KERN_INFO "%s: Warning: Host did not " - "wait for busy state to end.\n", - mmc_hostname(test->card->host)); + if (test->card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) + pr_info("%s: Warning: Host did not " + "wait for busy state to end.\n", + mmc_hostname(test->card->host)); } } while (mmc_test_busy(&cmd)); @@ -243,18 +268,13 @@ static int mmc_test_buffer_transfer(struct mmc_test_card *test, { int ret; - struct mmc_request mrq; - struct mmc_command cmd; - struct mmc_command stop; - struct mmc_data data; + struct mmc_request mrq = {0}; + struct mmc_command cmd = {0}; + struct mmc_command stop = {0}; + struct mmc_data data = {0}; struct scatterlist sg; - memset(&mrq, 0, sizeof(struct mmc_request)); - memset(&cmd, 0, sizeof(struct mmc_command)); - memset(&data, 0, sizeof(struct mmc_data)); - memset(&stop, 0, sizeof(struct mmc_command)); - mrq.cmd = &cmd; mrq.data = &data; mrq.stop = &stop; @@ -289,7 +309,7 @@ static void mmc_test_free_mem(struct mmc_test_mem *mem) } /* - * Allocate a lot of memory, preferrably max_sz but at least min_sz. In case + * Allocate a lot of memory, preferably max_sz but at least min_sz. In case * there isn't much memory do not exceed 1/16th total lowmem pages. Also do * not exceed a maximum number of segments and try not to make segments much * bigger than maximum segment size. @@ -369,21 +389,26 @@ out_free: * Map memory into a scatterlist. Optionally allow the same memory to be * mapped more than once. */ -static int mmc_test_map_sg(struct mmc_test_mem *mem, unsigned long sz, +static int mmc_test_map_sg(struct mmc_test_mem *mem, unsigned long size, struct scatterlist *sglist, int repeat, unsigned int max_segs, unsigned int max_seg_sz, - unsigned int *sg_len) + unsigned int *sg_len, int min_sg_len) { struct scatterlist *sg = NULL; unsigned int i; + unsigned long sz = size; sg_init_table(sglist, max_segs); + if (min_sg_len > max_segs) + min_sg_len = max_segs; *sg_len = 0; do { for (i = 0; i < mem->cnt; i++) { unsigned long len = PAGE_SIZE << mem->arr[i].order; + if (min_sg_len && (size / min_sg_len < len)) + len = ALIGN(size / min_sg_len, 512); if (len > sz) len = sz; if (len > max_seg_sz) @@ -494,7 +519,7 @@ static unsigned int mmc_test_rate(uint64_t bytes, struct timespec *ts) */ static void mmc_test_save_transfer_result(struct mmc_test_card *test, unsigned int count, unsigned int sectors, struct timespec ts, - unsigned int rate) + unsigned int rate, unsigned int iops) { struct mmc_test_transfer_result *tr; @@ -509,6 +534,7 @@ static void mmc_test_save_transfer_result(struct mmc_test_card *test, tr->sectors = sectors; tr->ts = ts; tr->rate = rate; + tr->iops = iops; list_add_tail(&tr->link, &test->gr->tr_lst); } @@ -519,20 +545,22 @@ static void mmc_test_save_transfer_result(struct mmc_test_card *test, static void mmc_test_print_rate(struct mmc_test_card *test, uint64_t bytes, struct timespec *ts1, struct timespec *ts2) { - unsigned int rate, sectors = bytes >> 9; + unsigned int rate, iops, sectors = bytes >> 9; struct timespec ts; ts = timespec_sub(*ts2, *ts1); rate = mmc_test_rate(bytes, &ts); + iops = mmc_test_rate(100, &ts); /* I/O ops per sec x 100 */ - printk(KERN_INFO "%s: Transfer of %u sectors (%u%s KiB) took %lu.%09lu " - "seconds (%u kB/s, %u KiB/s)\n", + pr_info("%s: Transfer of %u sectors (%u%s KiB) took %lu.%09lu " + "seconds (%u kB/s, %u KiB/s, %u.%02u IOPS)\n", mmc_hostname(test->card->host), sectors, sectors >> 1, (sectors & 1 ? ".5" : ""), (unsigned long)ts.tv_sec, - (unsigned long)ts.tv_nsec, rate / 1000, rate / 1024); + (unsigned long)ts.tv_nsec, rate / 1000, rate / 1024, + iops / 100, iops % 100); - mmc_test_save_transfer_result(test, 1, sectors, ts, rate); + mmc_test_save_transfer_result(test, 1, sectors, ts, rate, iops); } /* @@ -542,22 +570,25 @@ static void mmc_test_print_avg_rate(struct mmc_test_card *test, uint64_t bytes, unsigned int count, struct timespec *ts1, struct timespec *ts2) { - unsigned int rate, sectors = bytes >> 9; + unsigned int rate, iops, sectors = bytes >> 9; uint64_t tot = bytes * count; struct timespec ts; ts = timespec_sub(*ts2, *ts1); rate = mmc_test_rate(tot, &ts); + iops = mmc_test_rate(count * 100, &ts); /* I/O ops per sec x 100 */ - printk(KERN_INFO "%s: Transfer of %u x %u sectors (%u x %u%s KiB) took " - "%lu.%09lu seconds (%u kB/s, %u KiB/s)\n", + pr_info("%s: Transfer of %u x %u sectors (%u x %u%s KiB) took " + "%lu.%09lu seconds (%u kB/s, %u KiB/s, " + "%u.%02u IOPS, sg_len %d)\n", mmc_hostname(test->card->host), count, sectors, count, sectors >> 1, (sectors & 1 ? ".5" : ""), (unsigned long)ts.tv_sec, (unsigned long)ts.tv_nsec, - rate / 1000, rate / 1024); + rate / 1000, rate / 1024, iops / 100, iops % 100, + test->area.sg_len); - mmc_test_save_transfer_result(test, count, sectors, ts, rate); + mmc_test_save_transfer_result(test, count, sectors, ts, rate, iops); } /* @@ -658,7 +689,7 @@ static void mmc_test_prepare_broken_mrq(struct mmc_test_card *test, * Checks that a normal transfer didn't have any errors */ static int mmc_test_check_result(struct mmc_test_card *test, - struct mmc_request *mrq) + struct mmc_request *mrq) { int ret; @@ -682,6 +713,17 @@ static int mmc_test_check_result(struct mmc_test_card *test, return ret; } +static int mmc_test_check_result_async(struct mmc_card *card, + struct mmc_async_req *areq) +{ + struct mmc_test_async_req *test_async = + container_of(areq, struct mmc_test_async_req, areq); + + mmc_test_wait_busy(test_async->test); + + return mmc_test_check_result(test_async->test, areq->mrq); +} + /* * Checks that a "short transfer" behaved as expected */ @@ -717,21 +759,95 @@ static int mmc_test_check_broken_result(struct mmc_test_card *test, } /* + * Tests nonblock transfer with certain parameters + */ +static void mmc_test_nonblock_reset(struct mmc_request *mrq, + struct mmc_command *cmd, + struct mmc_command *stop, + struct mmc_data *data) +{ + memset(mrq, 0, sizeof(struct mmc_request)); + memset(cmd, 0, sizeof(struct mmc_command)); + memset(data, 0, sizeof(struct mmc_data)); + memset(stop, 0, sizeof(struct mmc_command)); + + mrq->cmd = cmd; + mrq->data = data; + mrq->stop = stop; +} +static int mmc_test_nonblock_transfer(struct mmc_test_card *test, + struct scatterlist *sg, unsigned sg_len, + unsigned dev_addr, unsigned blocks, + unsigned blksz, int write, int count) +{ + struct mmc_request mrq1; + struct mmc_command cmd1; + struct mmc_command stop1; + struct mmc_data data1; + + struct mmc_request mrq2; + struct mmc_command cmd2; + struct mmc_command stop2; + struct mmc_data data2; + + struct mmc_test_async_req test_areq[2]; + struct mmc_async_req *done_areq; + struct mmc_async_req *cur_areq = &test_areq[0].areq; + struct mmc_async_req *other_areq = &test_areq[1].areq; + int i; + int ret; + + test_areq[0].test = test; + test_areq[1].test = test; + + mmc_test_nonblock_reset(&mrq1, &cmd1, &stop1, &data1); + mmc_test_nonblock_reset(&mrq2, &cmd2, &stop2, &data2); + + cur_areq->mrq = &mrq1; + cur_areq->err_check = mmc_test_check_result_async; + other_areq->mrq = &mrq2; + other_areq->err_check = mmc_test_check_result_async; + + for (i = 0; i < count; i++) { + mmc_test_prepare_mrq(test, cur_areq->mrq, sg, sg_len, dev_addr, + blocks, blksz, write); + done_areq = mmc_start_req(test->card->host, cur_areq, &ret); + + if (ret || (!done_areq && i > 0)) + goto err; + + if (done_areq) { + if (done_areq->mrq == &mrq2) + mmc_test_nonblock_reset(&mrq2, &cmd2, + &stop2, &data2); + else + mmc_test_nonblock_reset(&mrq1, &cmd1, + &stop1, &data1); + } + done_areq = cur_areq; + cur_areq = other_areq; + other_areq = done_areq; + dev_addr += blocks; + } + + done_areq = mmc_start_req(test->card->host, NULL, &ret); + + return ret; +err: + return ret; +} + +/* * Tests a basic transfer with certain parameters */ static int mmc_test_simple_transfer(struct mmc_test_card *test, struct scatterlist *sg, unsigned sg_len, unsigned dev_addr, unsigned blocks, unsigned blksz, int write) { - struct mmc_request mrq; - struct mmc_command cmd; - struct mmc_command stop; - struct mmc_data data; - - memset(&mrq, 0, sizeof(struct mmc_request)); - memset(&cmd, 0, sizeof(struct mmc_command)); - memset(&data, 0, sizeof(struct mmc_data)); - memset(&stop, 0, sizeof(struct mmc_command)); + struct mmc_request mrq = {0}; + struct mmc_command cmd = {0}; + struct mmc_command stop = {0}; + struct mmc_data data = {0}; mrq.cmd = &cmd; mrq.data = &data; @@ -753,18 +869,13 @@ static int mmc_test_simple_transfer(struct mmc_test_card *test, static int mmc_test_broken_transfer(struct mmc_test_card *test, unsigned blocks, unsigned blksz, int write) { - struct mmc_request mrq; - struct mmc_command cmd; - struct mmc_command stop; - struct mmc_data data; + struct mmc_request mrq = {0}; + struct mmc_command cmd = {0}; + struct mmc_command stop = {0}; + struct mmc_data data = {0}; struct scatterlist sg; - memset(&mrq, 0, sizeof(struct mmc_request)); - memset(&cmd, 0, sizeof(struct mmc_command)); - memset(&data, 0, sizeof(struct mmc_data)); - memset(&stop, 0, sizeof(struct mmc_command)); - mrq.cmd = &cmd; mrq.data = &data; mrq.stop = &stop; @@ -1298,7 +1409,7 @@ static int mmc_test_multi_read_high(struct mmc_test_card *test) static int mmc_test_no_highmem(struct mmc_test_card *test) { - printk(KERN_INFO "%s: Highmem not configured - test skipped\n", + pr_info("%s: Highmem not configured - test skipped\n", mmc_hostname(test->card->host)); return 0; } @@ -1309,7 +1420,7 @@ static int mmc_test_no_highmem(struct mmc_test_card *test) * Map sz bytes so that it can be transferred. */ static int mmc_test_area_map(struct mmc_test_card *test, unsigned long sz, - int max_scatter) + int max_scatter, int min_sg_len) { struct mmc_test_area *t = &test->area; int err; @@ -1322,10 +1433,10 @@ static int mmc_test_area_map(struct mmc_test_card *test, unsigned long sz, &t->sg_len); } else { err = mmc_test_map_sg(t->mem, sz, t->sg, 1, t->max_segs, - t->max_seg_sz, &t->sg_len); + t->max_seg_sz, &t->sg_len, min_sg_len); } if (err) - printk(KERN_INFO "%s: Failed to map sg list\n", + pr_info("%s: Failed to map sg list\n", mmc_hostname(test->card->host)); return err; } @@ -1343,14 +1454,17 @@ static int mmc_test_area_transfer(struct mmc_test_card *test, } /* - * Map and transfer bytes. + * Map and transfer bytes for multiple transfers. */ -static int mmc_test_area_io(struct mmc_test_card *test, unsigned long sz, - unsigned int dev_addr, int write, int max_scatter, - int timed) +static int mmc_test_area_io_seq(struct mmc_test_card *test, unsigned long sz, + unsigned int dev_addr, int write, + int max_scatter, int timed, int count, + bool nonblock, int min_sg_len) { struct timespec ts1, ts2; - int ret; + int ret = 0; + int i; + struct mmc_test_area *t = &test->area; /* * In the case of a maximally scattered transfer, the maximum transfer @@ -1368,14 +1482,21 @@ static int mmc_test_area_io(struct mmc_test_card *test, unsigned long sz, sz = max_tfr; } - ret = mmc_test_area_map(test, sz, max_scatter); + ret = mmc_test_area_map(test, sz, max_scatter, min_sg_len); if (ret) return ret; if (timed) getnstimeofday(&ts1); + if (nonblock) + ret = mmc_test_nonblock_transfer(test, t->sg, t->sg_len, + dev_addr, t->blocks, 512, write, count); + else + for (i = 0; i < count && ret == 0; i++) { + ret = mmc_test_area_transfer(test, dev_addr, write); + dev_addr += sz >> 9; + } - ret = mmc_test_area_transfer(test, dev_addr, write); if (ret) return ret; @@ -1383,18 +1504,27 @@ static int mmc_test_area_io(struct mmc_test_card *test, unsigned long sz, getnstimeofday(&ts2); if (timed) - mmc_test_print_rate(test, sz, &ts1, &ts2); + mmc_test_print_avg_rate(test, sz, count, &ts1, &ts2); return 0; } +static int mmc_test_area_io(struct mmc_test_card *test, unsigned long sz, + unsigned int dev_addr, int write, int max_scatter, + int timed) +{ + return mmc_test_area_io_seq(test, sz, dev_addr, write, max_scatter, + timed, 1, false, 0); +} + /* * Write the test area entirely. */ static int mmc_test_area_fill(struct mmc_test_card *test) { - return mmc_test_area_io(test, test->area.max_tfr, test->area.dev_addr, - 1, 0, 0); + struct mmc_test_area *t = &test->area; + + return mmc_test_area_io(test, t->max_tfr, t->dev_addr, 1, 0, 0); } /* @@ -1407,7 +1537,7 @@ static int mmc_test_area_erase(struct mmc_test_card *test) if (!mmc_can_erase(test->card)) return 0; - return mmc_erase(test->card, t->dev_addr, test->area.max_sz >> 9, + return mmc_erase(test->card, t->dev_addr, t->max_sz >> 9, MMC_ERASE_ARG); } @@ -1425,31 +1555,33 @@ static int mmc_test_area_cleanup(struct mmc_test_card *test) } /* - * Initialize an area for testing large transfers. The size of the area is the - * preferred erase size which is a good size for optimal transfer speed. Note - * that is typically 4MiB for modern cards. The test area is set to the middle - * of the card because cards may have different charateristics at the front - * (for FAT file system optimization). Optionally, the area is erased (if the - * card supports it) which may improve write performance. Optionally, the area - * is filled with data for subsequent read tests. + * Initialize an area for testing large transfers. The test area is set to the + * middle of the card because cards may have different charateristics at the + * front (for FAT file system optimization). Optionally, the area is erased + * (if the card supports it) which may improve write performance. Optionally, + * the area is filled with data for subsequent read tests. */ static int mmc_test_area_init(struct mmc_test_card *test, int erase, int fill) { struct mmc_test_area *t = &test->area; - unsigned long min_sz = 64 * 1024; + unsigned long min_sz = 64 * 1024, sz; int ret; ret = mmc_test_set_blksize(test, 512); if (ret) return ret; - if (test->card->pref_erase > TEST_AREA_MAX_SIZE >> 9) - t->max_sz = TEST_AREA_MAX_SIZE; - else - t->max_sz = (unsigned long)test->card->pref_erase << 9; + /* Make the test area size about 4MiB */ + sz = (unsigned long)test->card->pref_erase << 9; + t->max_sz = sz; + while (t->max_sz < 4 * 1024 * 1024) + t->max_sz += sz; + while (t->max_sz > TEST_AREA_MAX_SIZE && t->max_sz > sz) + t->max_sz -= sz; t->max_segs = test->card->host->max_segs; t->max_seg_sz = test->card->host->max_seg_size; + t->max_seg_sz -= t->max_seg_sz % 512; t->max_tfr = t->max_sz; if (t->max_tfr >> 9 > test->card->host->max_blk_count) @@ -1533,8 +1665,10 @@ static int mmc_test_area_prepare_fill(struct mmc_test_card *test) static int mmc_test_best_performance(struct mmc_test_card *test, int write, int max_scatter) { - return mmc_test_area_io(test, test->area.max_tfr, test->area.dev_addr, - write, max_scatter, 1); + struct mmc_test_area *t = &test->area; + + return mmc_test_area_io(test, t->max_tfr, t->dev_addr, write, + max_scatter, 1); } /* @@ -1574,18 +1708,19 @@ static int mmc_test_best_write_perf_max_scatter(struct mmc_test_card *test) */ static int mmc_test_profile_read_perf(struct mmc_test_card *test) { + struct mmc_test_area *t = &test->area; unsigned long sz; unsigned int dev_addr; int ret; - for (sz = 512; sz < test->area.max_tfr; sz <<= 1) { - dev_addr = test->area.dev_addr + (sz >> 9); + for (sz = 512; sz < t->max_tfr; sz <<= 1) { + dev_addr = t->dev_addr + (sz >> 9); ret = mmc_test_area_io(test, sz, dev_addr, 0, 0, 1); if (ret) return ret; } - sz = test->area.max_tfr; - dev_addr = test->area.dev_addr; + sz = t->max_tfr; + dev_addr = t->dev_addr; return mmc_test_area_io(test, sz, dev_addr, 0, 0, 1); } @@ -1594,6 +1729,7 @@ static int mmc_test_profile_read_perf(struct mmc_test_card *test) */ static int mmc_test_profile_write_perf(struct mmc_test_card *test) { + struct mmc_test_area *t = &test->area; unsigned long sz; unsigned int dev_addr; int ret; @@ -1601,8 +1737,8 @@ static int mmc_test_profile_write_perf(struct mmc_test_card *test) ret = mmc_test_area_erase(test); if (ret) return ret; - for (sz = 512; sz < test->area.max_tfr; sz <<= 1) { - dev_addr = test->area.dev_addr + (sz >> 9); + for (sz = 512; sz < t->max_tfr; sz <<= 1) { + dev_addr = t->dev_addr + (sz >> 9); ret = mmc_test_area_io(test, sz, dev_addr, 1, 0, 1); if (ret) return ret; @@ -1610,8 +1746,8 @@ static int mmc_test_profile_write_perf(struct mmc_test_card *test) ret = mmc_test_area_erase(test); if (ret) return ret; - sz = test->area.max_tfr; - dev_addr = test->area.dev_addr; + sz = t->max_tfr; + dev_addr = t->dev_addr; return mmc_test_area_io(test, sz, dev_addr, 1, 0, 1); } @@ -1620,6 +1756,7 @@ static int mmc_test_profile_write_perf(struct mmc_test_card *test) */ static int mmc_test_profile_trim_perf(struct mmc_test_card *test) { + struct mmc_test_area *t = &test->area; unsigned long sz; unsigned int dev_addr; struct timespec ts1, ts2; @@ -1631,8 +1768,8 @@ static int mmc_test_profile_trim_perf(struct mmc_test_card *test) if (!mmc_can_erase(test->card)) return RESULT_UNSUP_HOST; - for (sz = 512; sz < test->area.max_sz; sz <<= 1) { - dev_addr = test->area.dev_addr + (sz >> 9); + for (sz = 512; sz < t->max_sz; sz <<= 1) { + dev_addr = t->dev_addr + (sz >> 9); getnstimeofday(&ts1); ret = mmc_erase(test->card, dev_addr, sz >> 9, MMC_TRIM_ARG); if (ret) @@ -1640,7 +1777,7 @@ static int mmc_test_profile_trim_perf(struct mmc_test_card *test) getnstimeofday(&ts2); mmc_test_print_rate(test, sz, &ts1, &ts2); } - dev_addr = test->area.dev_addr; + dev_addr = t->dev_addr; getnstimeofday(&ts1); ret = mmc_erase(test->card, dev_addr, sz >> 9, MMC_TRIM_ARG); if (ret) @@ -1652,12 +1789,13 @@ static int mmc_test_profile_trim_perf(struct mmc_test_card *test) static int mmc_test_seq_read_perf(struct mmc_test_card *test, unsigned long sz) { + struct mmc_test_area *t = &test->area; unsigned int dev_addr, i, cnt; struct timespec ts1, ts2; int ret; - cnt = test->area.max_sz / sz; - dev_addr = test->area.dev_addr; + cnt = t->max_sz / sz; + dev_addr = t->dev_addr; getnstimeofday(&ts1); for (i = 0; i < cnt; i++) { ret = mmc_test_area_io(test, sz, dev_addr, 0, 0, 0); @@ -1675,20 +1813,22 @@ static int mmc_test_seq_read_perf(struct mmc_test_card *test, unsigned long sz) */ static int mmc_test_profile_seq_read_perf(struct mmc_test_card *test) { + struct mmc_test_area *t = &test->area; unsigned long sz; int ret; - for (sz = 512; sz < test->area.max_tfr; sz <<= 1) { + for (sz = 512; sz < t->max_tfr; sz <<= 1) { ret = mmc_test_seq_read_perf(test, sz); if (ret) return ret; } - sz = test->area.max_tfr; + sz = t->max_tfr; return mmc_test_seq_read_perf(test, sz); } static int mmc_test_seq_write_perf(struct mmc_test_card *test, unsigned long sz) { + struct mmc_test_area *t = &test->area; unsigned int dev_addr, i, cnt; struct timespec ts1, ts2; int ret; @@ -1696,8 +1836,8 @@ static int mmc_test_seq_write_perf(struct mmc_test_card *test, unsigned long sz) ret = mmc_test_area_erase(test); if (ret) return ret; - cnt = test->area.max_sz / sz; - dev_addr = test->area.dev_addr; + cnt = t->max_sz / sz; + dev_addr = t->dev_addr; getnstimeofday(&ts1); for (i = 0; i < cnt; i++) { ret = mmc_test_area_io(test, sz, dev_addr, 1, 0, 0); @@ -1715,15 +1855,16 @@ static int mmc_test_seq_write_perf(struct mmc_test_card *test, unsigned long sz) */ static int mmc_test_profile_seq_write_perf(struct mmc_test_card *test) { + struct mmc_test_area *t = &test->area; unsigned long sz; int ret; - for (sz = 512; sz < test->area.max_tfr; sz <<= 1) { + for (sz = 512; sz < t->max_tfr; sz <<= 1) { ret = mmc_test_seq_write_perf(test, sz); if (ret) return ret; } - sz = test->area.max_tfr; + sz = t->max_tfr; return mmc_test_seq_write_perf(test, sz); } @@ -1732,6 +1873,7 @@ static int mmc_test_profile_seq_write_perf(struct mmc_test_card *test) */ static int mmc_test_profile_seq_trim_perf(struct mmc_test_card *test) { + struct mmc_test_area *t = &test->area; unsigned long sz; unsigned int dev_addr, i, cnt; struct timespec ts1, ts2; @@ -1743,15 +1885,15 @@ static int mmc_test_profile_seq_trim_perf(struct mmc_test_card *test) if (!mmc_can_erase(test->card)) return RESULT_UNSUP_HOST; - for (sz = 512; sz <= test->area.max_sz; sz <<= 1) { + for (sz = 512; sz <= t->max_sz; sz <<= 1) { ret = mmc_test_area_erase(test); if (ret) return ret; ret = mmc_test_area_fill(test); if (ret) return ret; - cnt = test->area.max_sz / sz; - dev_addr = test->area.dev_addr; + cnt = t->max_sz / sz; + dev_addr = t->dev_addr; getnstimeofday(&ts1); for (i = 0; i < cnt; i++) { ret = mmc_erase(test->card, dev_addr, sz >> 9, @@ -1766,6 +1908,453 @@ static int mmc_test_profile_seq_trim_perf(struct mmc_test_card *test) return 0; } +static unsigned int rnd_next = 1; + +static unsigned int mmc_test_rnd_num(unsigned int rnd_cnt) +{ + uint64_t r; + + rnd_next = rnd_next * 1103515245 + 12345; + r = (rnd_next >> 16) & 0x7fff; + return (r * rnd_cnt) >> 15; +} + +static int mmc_test_rnd_perf(struct mmc_test_card *test, int write, int print, + unsigned long sz) +{ + unsigned int dev_addr, cnt, rnd_addr, range1, range2, last_ea = 0, ea; + unsigned int ssz; + struct timespec ts1, ts2, ts; + int ret; + + ssz = sz >> 9; + + rnd_addr = mmc_test_capacity(test->card) / 4; + range1 = rnd_addr / test->card->pref_erase; + range2 = range1 / ssz; + + getnstimeofday(&ts1); + for (cnt = 0; cnt < UINT_MAX; cnt++) { + getnstimeofday(&ts2); + ts = timespec_sub(ts2, ts1); + if (ts.tv_sec >= 10) + break; + ea = mmc_test_rnd_num(range1); + if (ea == last_ea) + ea -= 1; + last_ea = ea; + dev_addr = rnd_addr + test->card->pref_erase * ea + + ssz * mmc_test_rnd_num(range2); + ret = mmc_test_area_io(test, sz, dev_addr, write, 0, 0); + if (ret) + return ret; + } + if (print) + mmc_test_print_avg_rate(test, sz, cnt, &ts1, &ts2); + return 0; +} + +static int mmc_test_random_perf(struct mmc_test_card *test, int write) +{ + struct mmc_test_area *t = &test->area; + unsigned int next; + unsigned long sz; + int ret; + + for (sz = 512; sz < t->max_tfr; sz <<= 1) { + /* + * When writing, try to get more consistent results by running + * the test twice with exactly the same I/O but outputting the + * results only for the 2nd run. + */ + if (write) { + next = rnd_next; + ret = mmc_test_rnd_perf(test, write, 0, sz); + if (ret) + return ret; + rnd_next = next; + } + ret = mmc_test_rnd_perf(test, write, 1, sz); + if (ret) + return ret; + } + sz = t->max_tfr; + if (write) { + next = rnd_next; + ret = mmc_test_rnd_perf(test, write, 0, sz); + if (ret) + return ret; + rnd_next = next; + } + return mmc_test_rnd_perf(test, write, 1, sz); +} + +/* + * Random read performance by transfer size. + */ +static int mmc_test_random_read_perf(struct mmc_test_card *test) +{ + return mmc_test_random_perf(test, 0); +} + +/* + * Random write performance by transfer size. + */ +static int mmc_test_random_write_perf(struct mmc_test_card *test) +{ + return mmc_test_random_perf(test, 1); +} + +static int mmc_test_seq_perf(struct mmc_test_card *test, int write, + unsigned int tot_sz, int max_scatter) +{ + struct mmc_test_area *t = &test->area; + unsigned int dev_addr, i, cnt, sz, ssz; + struct timespec ts1, ts2; + int ret; + + sz = t->max_tfr; + + /* + * In the case of a maximally scattered transfer, the maximum transfer + * size is further limited by using PAGE_SIZE segments. + */ + if (max_scatter) { + unsigned long max_tfr; + + if (t->max_seg_sz >= PAGE_SIZE) + max_tfr = t->max_segs * PAGE_SIZE; + else + max_tfr = t->max_segs * t->max_seg_sz; + if (sz > max_tfr) + sz = max_tfr; + } + + ssz = sz >> 9; + dev_addr = mmc_test_capacity(test->card) / 4; + if (tot_sz > dev_addr << 9) + tot_sz = dev_addr << 9; + cnt = tot_sz / sz; + dev_addr &= 0xffff0000; /* Round to 64MiB boundary */ + + getnstimeofday(&ts1); + for (i = 0; i < cnt; i++) { + ret = mmc_test_area_io(test, sz, dev_addr, write, + max_scatter, 0); + if (ret) + return ret; + dev_addr += ssz; + } + getnstimeofday(&ts2); + + mmc_test_print_avg_rate(test, sz, cnt, &ts1, &ts2); + + return 0; +} + +static int mmc_test_large_seq_perf(struct mmc_test_card *test, int write) +{ + int ret, i; + + for (i = 0; i < 10; i++) { + ret = mmc_test_seq_perf(test, write, 10 * 1024 * 1024, 1); + if (ret) + return ret; + } + for (i = 0; i < 5; i++) { + ret = mmc_test_seq_perf(test, write, 100 * 1024 * 1024, 1); + if (ret) + return ret; + } + for (i = 0; i < 3; i++) { + ret = mmc_test_seq_perf(test, write, 1000 * 1024 * 1024, 1); + if (ret) + return ret; + } + + return ret; +} + +/* + * Large sequential read performance. + */ +static int mmc_test_large_seq_read_perf(struct mmc_test_card *test) +{ + return mmc_test_large_seq_perf(test, 0); +} + +/* + * Large sequential write performance. + */ +static int mmc_test_large_seq_write_perf(struct mmc_test_card *test) +{ + return mmc_test_large_seq_perf(test, 1); +} + +static int mmc_test_rw_multiple(struct mmc_test_card *test, + struct mmc_test_multiple_rw *tdata, + unsigned int reqsize, unsigned int size, + int min_sg_len) +{ + unsigned int dev_addr; + struct mmc_test_area *t = &test->area; + int ret = 0; + + /* Set up test area */ + if (size > mmc_test_capacity(test->card) / 2 * 512) + size = mmc_test_capacity(test->card) / 2 * 512; + if (reqsize > t->max_tfr) + reqsize = t->max_tfr; + dev_addr = mmc_test_capacity(test->card) / 4; + if ((dev_addr & 0xffff0000)) + dev_addr &= 0xffff0000; /* Round to 64MiB boundary */ + else + dev_addr &= 0xfffff800; /* Round to 1MiB boundary */ + if (!dev_addr) + goto err; + + if (reqsize > size) + return 0; + + /* prepare test area */ + if (mmc_can_erase(test->card) && + tdata->prepare & MMC_TEST_PREP_ERASE) { + ret = mmc_erase(test->card, dev_addr, + size / 512, MMC_SECURE_ERASE_ARG); + if (ret) + ret = mmc_erase(test->card, dev_addr, + size / 512, MMC_ERASE_ARG); + if (ret) + goto err; + } + + /* Run test */ + ret = mmc_test_area_io_seq(test, reqsize, dev_addr, + tdata->do_write, 0, 1, size / reqsize, + tdata->do_nonblock_req, min_sg_len); + if (ret) + goto err; + + return ret; + err: + pr_info("[%s] error\n", __func__); + return ret; +} + +static int mmc_test_rw_multiple_size(struct mmc_test_card *test, + struct mmc_test_multiple_rw *rw) +{ + int ret = 0; + int i; + void *pre_req = test->card->host->ops->pre_req; + void *post_req = test->card->host->ops->post_req; + + if (rw->do_nonblock_req && + ((!pre_req && post_req) || (pre_req && !post_req))) { + pr_info("error: only one of pre/post is defined\n"); + return -EINVAL; + } + + for (i = 0 ; i < rw->len && ret == 0; i++) { + ret = mmc_test_rw_multiple(test, rw, rw->bs[i], rw->size, 0); + if (ret) + break; + } + return ret; +} + +static int mmc_test_rw_multiple_sg_len(struct mmc_test_card *test, + struct mmc_test_multiple_rw *rw) +{ + int ret = 0; + int i; + + for (i = 0 ; i < rw->len && ret == 0; i++) { + ret = mmc_test_rw_multiple(test, rw, 512*1024, rw->size, + rw->sg_len[i]); + if (ret) + break; + } + return ret; +} + +/* + * Multiple blocking write 4k to 4 MB chunks + */ +static int mmc_test_profile_mult_write_blocking_perf(struct mmc_test_card *test) +{ + unsigned int bs[] = {1 << 12, 1 << 13, 1 << 14, 1 << 15, 1 << 16, + 1 << 17, 1 << 18, 1 << 19, 1 << 20, 1 << 22}; + struct mmc_test_multiple_rw test_data = { + .bs = bs, + .size = TEST_AREA_MAX_SIZE, + .len = ARRAY_SIZE(bs), + .do_write = true, + .do_nonblock_req = false, + .prepare = MMC_TEST_PREP_ERASE, + }; + + return mmc_test_rw_multiple_size(test, &test_data); +}; + +/* + * Multiple non-blocking write 4k to 4 MB chunks + */ +static int mmc_test_profile_mult_write_nonblock_perf(struct mmc_test_card *test) +{ + unsigned int bs[] = {1 << 12, 1 << 13, 1 << 14, 1 << 15, 1 << 16, + 1 << 17, 1 << 18, 1 << 19, 1 << 20, 1 << 22}; + struct mmc_test_multiple_rw test_data = { + .bs = bs, + .size = TEST_AREA_MAX_SIZE, + .len = ARRAY_SIZE(bs), + .do_write = true, + .do_nonblock_req = true, + .prepare = MMC_TEST_PREP_ERASE, + }; + + return mmc_test_rw_multiple_size(test, &test_data); +} + +/* + * Multiple blocking read 4k to 4 MB chunks + */ +static int mmc_test_profile_mult_read_blocking_perf(struct mmc_test_card *test) +{ + unsigned int bs[] = {1 << 12, 1 << 13, 1 << 14, 1 << 15, 1 << 16, + 1 << 17, 1 << 18, 1 << 19, 1 << 20, 1 << 22}; + struct mmc_test_multiple_rw test_data = { + .bs = bs, + .size = TEST_AREA_MAX_SIZE, + .len = ARRAY_SIZE(bs), + .do_write = false, + .do_nonblock_req = false, + .prepare = MMC_TEST_PREP_NONE, + }; + + return mmc_test_rw_multiple_size(test, &test_data); +} + +/* + * Multiple non-blocking read 4k to 4 MB chunks + */ +static int mmc_test_profile_mult_read_nonblock_perf(struct mmc_test_card *test) +{ + unsigned int bs[] = {1 << 12, 1 << 13, 1 << 14, 1 << 15, 1 << 16, + 1 << 17, 1 << 18, 1 << 19, 1 << 20, 1 << 22}; + struct mmc_test_multiple_rw test_data = { + .bs = bs, + .size = TEST_AREA_MAX_SIZE, + .len = ARRAY_SIZE(bs), + .do_write = false, + .do_nonblock_req = true, + .prepare = MMC_TEST_PREP_NONE, + }; + + return mmc_test_rw_multiple_size(test, &test_data); +} + +/* + * Multiple blocking write 1 to 512 sg elements + */ +static int mmc_test_profile_sglen_wr_blocking_perf(struct mmc_test_card *test) +{ + unsigned int sg_len[] = {1, 1 << 3, 1 << 4, 1 << 5, 1 << 6, + 1 << 7, 1 << 8, 1 << 9}; + struct mmc_test_multiple_rw test_data = { + .sg_len = sg_len, + .size = TEST_AREA_MAX_SIZE, + .len = ARRAY_SIZE(sg_len), + .do_write = true, + .do_nonblock_req = false, + .prepare = MMC_TEST_PREP_ERASE, + }; + + return mmc_test_rw_multiple_sg_len(test, &test_data); +}; + +/* + * Multiple non-blocking write 1 to 512 sg elements + */ +static int mmc_test_profile_sglen_wr_nonblock_perf(struct mmc_test_card *test) +{ + unsigned int sg_len[] = {1, 1 << 3, 1 << 4, 1 << 5, 1 << 6, + 1 << 7, 1 << 8, 1 << 9}; + struct mmc_test_multiple_rw test_data = { + .sg_len = sg_len, + .size = TEST_AREA_MAX_SIZE, + .len = ARRAY_SIZE(sg_len), + .do_write = true, + .do_nonblock_req = true, + .prepare = MMC_TEST_PREP_ERASE, + }; + + return mmc_test_rw_multiple_sg_len(test, &test_data); +} + +/* + * Multiple blocking read 1 to 512 sg elements + */ +static int mmc_test_profile_sglen_r_blocking_perf(struct mmc_test_card *test) +{ + unsigned int sg_len[] = {1, 1 << 3, 1 << 4, 1 << 5, 1 << 6, + 1 << 7, 1 << 8, 1 << 9}; + struct mmc_test_multiple_rw test_data = { + .sg_len = sg_len, + .size = TEST_AREA_MAX_SIZE, + .len = ARRAY_SIZE(sg_len), + .do_write = false, + .do_nonblock_req = false, + .prepare = MMC_TEST_PREP_NONE, + }; + + return mmc_test_rw_multiple_sg_len(test, &test_data); +} + +/* + * Multiple non-blocking read 1 to 512 sg elements + */ +static int mmc_test_profile_sglen_r_nonblock_perf(struct mmc_test_card *test) +{ + unsigned int sg_len[] = {1, 1 << 3, 1 << 4, 1 << 5, 1 << 6, + 1 << 7, 1 << 8, 1 << 9}; + struct mmc_test_multiple_rw test_data = { + .sg_len = sg_len, + .size = TEST_AREA_MAX_SIZE, + .len = ARRAY_SIZE(sg_len), + .do_write = false, + .do_nonblock_req = true, + .prepare = MMC_TEST_PREP_NONE, + }; + + return mmc_test_rw_multiple_sg_len(test, &test_data); +} + +/* + * eMMC hardware reset. + */ +static int mmc_test_hw_reset(struct mmc_test_card *test) +{ + struct mmc_card *card = test->card; + struct mmc_host *host = card->host; + int err; + + err = mmc_hw_reset_check(host); + if (!err) + return RESULT_OK; + + if (err == -ENOSYS) + return RESULT_FAIL; + + if (err != -EOPNOTSUPP) + return err; + + if (!mmc_can_reset(card)) + return RESULT_UNSUP_CARD; + + return RESULT_UNSUP_HOST; +} + static const struct mmc_test_case mmc_test_cases[] = { { .name = "Basic write (no data verification)", @@ -2005,6 +2594,94 @@ static const struct mmc_test_case mmc_test_cases[] = { .cleanup = mmc_test_area_cleanup, }, + { + .name = "Random read performance by transfer size", + .prepare = mmc_test_area_prepare, + .run = mmc_test_random_read_perf, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Random write performance by transfer size", + .prepare = mmc_test_area_prepare, + .run = mmc_test_random_write_perf, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Large sequential read into scattered pages", + .prepare = mmc_test_area_prepare, + .run = mmc_test_large_seq_read_perf, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Large sequential write from scattered pages", + .prepare = mmc_test_area_prepare, + .run = mmc_test_large_seq_write_perf, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Write performance with blocking req 4k to 4MB", + .prepare = mmc_test_area_prepare, + .run = mmc_test_profile_mult_write_blocking_perf, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Write performance with non-blocking req 4k to 4MB", + .prepare = mmc_test_area_prepare, + .run = mmc_test_profile_mult_write_nonblock_perf, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Read performance with blocking req 4k to 4MB", + .prepare = mmc_test_area_prepare, + .run = mmc_test_profile_mult_read_blocking_perf, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Read performance with non-blocking req 4k to 4MB", + .prepare = mmc_test_area_prepare, + .run = mmc_test_profile_mult_read_nonblock_perf, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Write performance blocking req 1 to 512 sg elems", + .prepare = mmc_test_area_prepare, + .run = mmc_test_profile_sglen_wr_blocking_perf, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Write performance non-blocking req 1 to 512 sg elems", + .prepare = mmc_test_area_prepare, + .run = mmc_test_profile_sglen_wr_nonblock_perf, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Read performance blocking req 1 to 512 sg elems", + .prepare = mmc_test_area_prepare, + .run = mmc_test_profile_sglen_r_blocking_perf, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Read performance non-blocking req 1 to 512 sg elems", + .prepare = mmc_test_area_prepare, + .run = mmc_test_profile_sglen_r_nonblock_perf, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "eMMC hardware reset", + .run = mmc_test_hw_reset, + }, }; static DEFINE_MUTEX(mmc_test_lock); @@ -2015,7 +2692,7 @@ static void mmc_test_run(struct mmc_test_card *test, int testcase) { int i, ret; - printk(KERN_INFO "%s: Starting tests of card %s...\n", + pr_info("%s: Starting tests of card %s...\n", mmc_hostname(test->card->host), mmc_card_id(test->card)); mmc_claim_host(test->card->host); @@ -2026,14 +2703,14 @@ static void mmc_test_run(struct mmc_test_card *test, int testcase) if (testcase && ((i + 1) != testcase)) continue; - printk(KERN_INFO "%s: Test case %d. %s...\n", + pr_info("%s: Test case %d. %s...\n", mmc_hostname(test->card->host), i + 1, mmc_test_cases[i].name); if (mmc_test_cases[i].prepare) { ret = mmc_test_cases[i].prepare(test); if (ret) { - printk(KERN_INFO "%s: Result: Prepare " + pr_info("%s: Result: Prepare " "stage failed! (%d)\n", mmc_hostname(test->card->host), ret); @@ -2063,25 +2740,25 @@ static void mmc_test_run(struct mmc_test_card *test, int testcase) ret = mmc_test_cases[i].run(test); switch (ret) { case RESULT_OK: - printk(KERN_INFO "%s: Result: OK\n", + pr_info("%s: Result: OK\n", mmc_hostname(test->card->host)); break; case RESULT_FAIL: - printk(KERN_INFO "%s: Result: FAILED\n", + pr_info("%s: Result: FAILED\n", mmc_hostname(test->card->host)); break; case RESULT_UNSUP_HOST: - printk(KERN_INFO "%s: Result: UNSUPPORTED " + pr_info("%s: Result: UNSUPPORTED " "(by host)\n", mmc_hostname(test->card->host)); break; case RESULT_UNSUP_CARD: - printk(KERN_INFO "%s: Result: UNSUPPORTED " + pr_info("%s: Result: UNSUPPORTED " "(by card)\n", mmc_hostname(test->card->host)); break; default: - printk(KERN_INFO "%s: Result: ERROR (%d)\n", + pr_info("%s: Result: ERROR (%d)\n", mmc_hostname(test->card->host), ret); } @@ -2092,7 +2769,7 @@ static void mmc_test_run(struct mmc_test_card *test, int testcase) if (mmc_test_cases[i].cleanup) { ret = mmc_test_cases[i].cleanup(test); if (ret) { - printk(KERN_INFO "%s: Warning: Cleanup " + pr_info("%s: Warning: Cleanup " "stage failed! (%d)\n", mmc_hostname(test->card->host), ret); @@ -2102,7 +2779,7 @@ static void mmc_test_run(struct mmc_test_card *test, int testcase) mmc_release_host(test->card->host); - printk(KERN_INFO "%s: Tests completed.\n", + pr_info("%s: Tests completed.\n", mmc_hostname(test->card->host)); } @@ -2148,11 +2825,11 @@ static int mtf_test_show(struct seq_file *sf, void *data) seq_printf(sf, "Test %d: %d\n", gr->testcase + 1, gr->result); list_for_each_entry(tr, &gr->tr_lst, link) { - seq_printf(sf, "%u %d %lu.%09lu %u\n", + seq_printf(sf, "%u %d %lu.%09lu %u %u.%02u\n", tr->count, tr->sectors, (unsigned long)tr->ts.tv_sec, (unsigned long)tr->ts.tv_nsec, - tr->rate); + tr->rate, tr->iops / 100, tr->iops % 100); } } @@ -2172,18 +2849,12 @@ static ssize_t mtf_test_write(struct file *file, const char __user *buf, struct seq_file *sf = (struct seq_file *)file->private_data; struct mmc_card *card = (struct mmc_card *)sf->private; struct mmc_test_card *test; - char lbuf[12]; long testcase; + int ret; - if (count >= sizeof(lbuf)) - return -EINVAL; - - if (copy_from_user(lbuf, buf, count)) - return -EFAULT; - lbuf[count] = '\0'; - - if (strict_strtol(lbuf, 10, &testcase)) - return -EINVAL; + ret = kstrtol_from_user(buf, count, 10, &testcase); + if (ret) + return ret; test = kzalloc(sizeof(struct mmc_test_card), GFP_KERNEL); if (!test) @@ -2229,7 +2900,33 @@ static const struct file_operations mmc_test_fops_test = { .release = single_release, }; -static void mmc_test_free_file_test(struct mmc_card *card) +static int mtf_testlist_show(struct seq_file *sf, void *data) +{ + int i; + + mutex_lock(&mmc_test_lock); + + for (i = 0; i < ARRAY_SIZE(mmc_test_cases); i++) + seq_printf(sf, "%d:\t%s\n", i+1, mmc_test_cases[i].name); + + mutex_unlock(&mmc_test_lock); + + return 0; +} + +static int mtf_testlist_open(struct inode *inode, struct file *file) +{ + return single_open(file, mtf_testlist_show, inode->i_private); +} + +static const struct file_operations mmc_test_fops_testlist = { + .open = mtf_testlist_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static void mmc_test_free_dbgfs_file(struct mmc_card *card) { struct mmc_test_dbgfs_file *df, *dfs; @@ -2246,23 +2943,21 @@ static void mmc_test_free_file_test(struct mmc_card *card) mutex_unlock(&mmc_test_lock); } -static int mmc_test_register_file_test(struct mmc_card *card) +static int __mmc_test_register_dbgfs_file(struct mmc_card *card, + const char *name, umode_t mode, const struct file_operations *fops) { struct dentry *file = NULL; struct mmc_test_dbgfs_file *df; - int ret = 0; - - mutex_lock(&mmc_test_lock); if (card->debugfs_root) - file = debugfs_create_file("test", S_IWUSR | S_IRUGO, - card->debugfs_root, card, &mmc_test_fops_test); + file = debugfs_create_file(name, mode, card->debugfs_root, + card, fops); if (IS_ERR_OR_NULL(file)) { dev_err(&card->dev, - "Can't create file. Perhaps debugfs is disabled.\n"); - ret = -ENODEV; - goto err; + "Can't create %s. Perhaps debugfs is disabled.\n", + name); + return -ENODEV; } df = kmalloc(sizeof(struct mmc_test_dbgfs_file), GFP_KERNEL); @@ -2270,14 +2965,31 @@ static int mmc_test_register_file_test(struct mmc_card *card) debugfs_remove(file); dev_err(&card->dev, "Can't allocate memory for internal usage.\n"); - ret = -ENOMEM; - goto err; + return -ENOMEM; } df->card = card; df->file = file; list_add(&df->link, &mmc_test_file_test); + return 0; +} + +static int mmc_test_register_dbgfs_file(struct mmc_card *card) +{ + int ret; + + mutex_lock(&mmc_test_lock); + + ret = __mmc_test_register_dbgfs_file(card, "test", S_IWUSR | S_IRUGO, + &mmc_test_fops_test); + if (ret) + goto err; + + ret = __mmc_test_register_dbgfs_file(card, "testlist", S_IRUGO, + &mmc_test_fops_testlist); + if (ret) + goto err; err: mutex_unlock(&mmc_test_lock); @@ -2292,7 +3004,7 @@ static int mmc_test_probe(struct mmc_card *card) if (!mmc_card_mmc(card) && !mmc_card_sd(card)) return -ENODEV; - ret = mmc_test_register_file_test(card); + ret = mmc_test_register_dbgfs_file(card); if (ret) return ret; @@ -2304,7 +3016,11 @@ static int mmc_test_probe(struct mmc_card *card) static void mmc_test_remove(struct mmc_card *card) { mmc_test_free_result(card); - mmc_test_free_file_test(card); + mmc_test_free_dbgfs_file(card); +} + +static void mmc_test_shutdown(struct mmc_card *card) +{ } static struct mmc_driver mmc_driver = { @@ -2313,6 +3029,7 @@ static struct mmc_driver mmc_driver = { }, .probe = mmc_test_probe, .remove = mmc_test_remove, + .shutdown = mmc_test_shutdown, }; static int __init mmc_test_init(void) @@ -2324,7 +3041,7 @@ static void __exit mmc_test_exit(void) { /* Clear stalled data if card is still plugged */ mmc_test_free_result(NULL); - mmc_test_free_file_test(NULL); + mmc_test_free_dbgfs_file(NULL); mmc_unregister_driver(&mmc_driver); } diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c index 4e42d030e09..3e049c13429 100644 --- a/drivers/mmc/card/queue.c +++ b/drivers/mmc/card/queue.c @@ -15,6 +15,7 @@ #include <linux/freezer.h> #include <linux/kthread.h> #include <linux/scatterlist.h> +#include <linux/dma-mapping.h> #include <linux/mmc/card.h> #include <linux/mmc/host.h> @@ -22,13 +23,13 @@ #define MMC_QUEUE_BOUNCESZ 65536 -#define MMC_QUEUE_SUSPENDED (1 << 0) - /* * Prepare a MMC request. This just filters out odd stuff. */ static int mmc_prep_request(struct request_queue *q, struct request *req) { + struct mmc_queue *mq = q->queuedata; + /* * We only like normal block requests and discards. */ @@ -37,6 +38,9 @@ static int mmc_prep_request(struct request_queue *q, struct request *req) return BLKPREP_KILL; } + if (mq && mmc_card_removed(mq->card)) + return BLKPREP_KILL; + req->cmd_flags |= REQ_DONTPREP; return BLKPREP_OK; @@ -52,15 +56,40 @@ static int mmc_queue_thread(void *d) down(&mq->thread_sem); do { struct request *req = NULL; + struct mmc_queue_req *tmp; + unsigned int cmd_flags = 0; spin_lock_irq(q->queue_lock); set_current_state(TASK_INTERRUPTIBLE); - if (!blk_queue_plugged(q)) - req = blk_fetch_request(q); - mq->req = req; + req = blk_fetch_request(q); + mq->mqrq_cur->req = req; spin_unlock_irq(q->queue_lock); - if (!req) { + if (req || mq->mqrq_prev->req) { + set_current_state(TASK_RUNNING); + cmd_flags = req ? req->cmd_flags : 0; + mq->issue_fn(mq, req); + if (mq->flags & MMC_QUEUE_NEW_REQUEST) { + mq->flags &= ~MMC_QUEUE_NEW_REQUEST; + continue; /* fetch again */ + } + + /* + * Current request becomes previous request + * and vice versa. + * In case of special requests, current request + * has been finished. Do not assign it to previous + * request. + */ + if (cmd_flags & MMC_REQ_SPECIAL_MASK) + mq->mqrq_cur->req = NULL; + + mq->mqrq_prev->brq.mrq.data = NULL; + mq->mqrq_prev->req = NULL; + tmp = mq->mqrq_prev; + mq->mqrq_prev = mq->mqrq_cur; + mq->mqrq_cur = tmp; + } else { if (kthread_should_stop()) { set_current_state(TASK_RUNNING); break; @@ -68,11 +97,7 @@ static int mmc_queue_thread(void *d) up(&mq->thread_sem); schedule(); down(&mq->thread_sem); - continue; } - set_current_state(TASK_RUNNING); - - mq->issue_fn(mq, req); } while (1); up(&mq->thread_sem); @@ -85,10 +110,12 @@ static int mmc_queue_thread(void *d) * on any queue on this host, and attempt to issue it. This may * not be the queue we were asked to process. */ -static void mmc_request(struct request_queue *q) +static void mmc_request_fn(struct request_queue *q) { struct mmc_queue *mq = q->queuedata; struct request *req; + unsigned long flags; + struct mmc_context_info *cntx; if (!mq) { while ((req = blk_fetch_request(q)) != NULL) { @@ -98,52 +125,93 @@ static void mmc_request(struct request_queue *q) return; } - if (!mq->req) + cntx = &mq->card->host->context_info; + if (!mq->mqrq_cur->req && mq->mqrq_prev->req) { + /* + * New MMC request arrived when MMC thread may be + * blocked on the previous request to be complete + * with no current request fetched + */ + spin_lock_irqsave(&cntx->lock, flags); + if (cntx->is_waiting_last_req) { + cntx->is_new_req = true; + wake_up_interruptible(&cntx->wait); + } + spin_unlock_irqrestore(&cntx->lock, flags); + } else if (!mq->mqrq_cur->req && !mq->mqrq_prev->req) wake_up_process(mq->thread); } +static struct scatterlist *mmc_alloc_sg(int sg_len, int *err) +{ + struct scatterlist *sg; + + sg = kmalloc(sizeof(struct scatterlist)*sg_len, GFP_KERNEL); + if (!sg) + *err = -ENOMEM; + else { + *err = 0; + sg_init_table(sg, sg_len); + } + + return sg; +} + +static void mmc_queue_setup_discard(struct request_queue *q, + struct mmc_card *card) +{ + unsigned max_discard; + + max_discard = mmc_calc_max_discard(card); + if (!max_discard) + return; + + queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q); + q->limits.max_discard_sectors = max_discard; + if (card->erased_byte == 0 && !mmc_can_discard(card)) + q->limits.discard_zeroes_data = 1; + q->limits.discard_granularity = card->pref_erase << 9; + /* granularity must not be greater than max. discard */ + if (card->pref_erase > max_discard) + q->limits.discard_granularity = 0; + if (mmc_can_secure_erase_trim(card)) + queue_flag_set_unlocked(QUEUE_FLAG_SECDISCARD, q); +} + /** * mmc_init_queue - initialise a queue structure. * @mq: mmc queue * @card: mmc card to attach this queue * @lock: queue lock + * @subname: partition subname * * Initialise a MMC card request queue. */ -int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock) +int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, + spinlock_t *lock, const char *subname) { struct mmc_host *host = card->host; u64 limit = BLK_BOUNCE_HIGH; int ret; + struct mmc_queue_req *mqrq_cur = &mq->mqrq[0]; + struct mmc_queue_req *mqrq_prev = &mq->mqrq[1]; if (mmc_dev(host)->dma_mask && *mmc_dev(host)->dma_mask) - limit = *mmc_dev(host)->dma_mask; + limit = (u64)dma_max_pfn(mmc_dev(host)) << PAGE_SHIFT; mq->card = card; - mq->queue = blk_init_queue(mmc_request, lock); + mq->queue = blk_init_queue(mmc_request_fn, lock); if (!mq->queue) return -ENOMEM; + mq->mqrq_cur = mqrq_cur; + mq->mqrq_prev = mqrq_prev; mq->queue->queuedata = mq; - mq->req = NULL; blk_queue_prep_rq(mq->queue, mmc_prep_request); queue_flag_set_unlocked(QUEUE_FLAG_NONROT, mq->queue); - if (mmc_can_erase(card)) { - queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, mq->queue); - mq->queue->limits.max_discard_sectors = UINT_MAX; - if (card->erased_byte == 0) - mq->queue->limits.discard_zeroes_data = 1; - if (!mmc_can_trim(card) && is_power_of_2(card->erase_size)) { - mq->queue->limits.discard_granularity = - card->erase_size << 9; - mq->queue->limits.discard_alignment = - card->erase_size << 9; - } - if (mmc_can_secure_erase_trim(card)) - queue_flag_set_unlocked(QUEUE_FLAG_SECDISCARD, - mq->queue); - } + if (mmc_can_erase(card)) + mmc_queue_setup_discard(mq->queue, card); #ifdef CONFIG_MMC_BLOCK_BOUNCE if (host->max_segs == 1) { @@ -159,59 +227,70 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock bouncesz = host->max_blk_count * 512; if (bouncesz > 512) { - mq->bounce_buf = kmalloc(bouncesz, GFP_KERNEL); - if (!mq->bounce_buf) { - printk(KERN_WARNING "%s: unable to " - "allocate bounce buffer\n", + mqrq_cur->bounce_buf = kmalloc(bouncesz, GFP_KERNEL); + if (!mqrq_cur->bounce_buf) { + pr_warning("%s: unable to " + "allocate bounce cur buffer\n", + mmc_card_name(card)); + } + mqrq_prev->bounce_buf = kmalloc(bouncesz, GFP_KERNEL); + if (!mqrq_prev->bounce_buf) { + pr_warning("%s: unable to " + "allocate bounce prev buffer\n", mmc_card_name(card)); + kfree(mqrq_cur->bounce_buf); + mqrq_cur->bounce_buf = NULL; } } - if (mq->bounce_buf) { + if (mqrq_cur->bounce_buf && mqrq_prev->bounce_buf) { blk_queue_bounce_limit(mq->queue, BLK_BOUNCE_ANY); blk_queue_max_hw_sectors(mq->queue, bouncesz / 512); blk_queue_max_segments(mq->queue, bouncesz / 512); blk_queue_max_segment_size(mq->queue, bouncesz); - mq->sg = kmalloc(sizeof(struct scatterlist), - GFP_KERNEL); - if (!mq->sg) { - ret = -ENOMEM; + mqrq_cur->sg = mmc_alloc_sg(1, &ret); + if (ret) goto cleanup_queue; - } - sg_init_table(mq->sg, 1); - mq->bounce_sg = kmalloc(sizeof(struct scatterlist) * - bouncesz / 512, GFP_KERNEL); - if (!mq->bounce_sg) { - ret = -ENOMEM; + mqrq_cur->bounce_sg = + mmc_alloc_sg(bouncesz / 512, &ret); + if (ret) + goto cleanup_queue; + + mqrq_prev->sg = mmc_alloc_sg(1, &ret); + if (ret) + goto cleanup_queue; + + mqrq_prev->bounce_sg = + mmc_alloc_sg(bouncesz / 512, &ret); + if (ret) goto cleanup_queue; - } - sg_init_table(mq->bounce_sg, bouncesz / 512); } } #endif - if (!mq->bounce_buf) { + if (!mqrq_cur->bounce_buf && !mqrq_prev->bounce_buf) { blk_queue_bounce_limit(mq->queue, limit); blk_queue_max_hw_sectors(mq->queue, min(host->max_blk_count, host->max_req_size / 512)); blk_queue_max_segments(mq->queue, host->max_segs); blk_queue_max_segment_size(mq->queue, host->max_seg_size); - mq->sg = kmalloc(sizeof(struct scatterlist) * - host->max_segs, GFP_KERNEL); - if (!mq->sg) { - ret = -ENOMEM; + mqrq_cur->sg = mmc_alloc_sg(host->max_segs, &ret); + if (ret) + goto cleanup_queue; + + + mqrq_prev->sg = mmc_alloc_sg(host->max_segs, &ret); + if (ret) goto cleanup_queue; - } - sg_init_table(mq->sg, host->max_segs); } sema_init(&mq->thread_sem, 1); - mq->thread = kthread_run(mmc_queue_thread, mq, "mmcqd/%d", - host->index); + mq->thread = kthread_run(mmc_queue_thread, mq, "mmcqd/%d%s", + host->index, subname ? subname : ""); if (IS_ERR(mq->thread)) { ret = PTR_ERR(mq->thread); @@ -220,16 +299,22 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock return 0; free_bounce_sg: - if (mq->bounce_sg) - kfree(mq->bounce_sg); - mq->bounce_sg = NULL; + kfree(mqrq_cur->bounce_sg); + mqrq_cur->bounce_sg = NULL; + kfree(mqrq_prev->bounce_sg); + mqrq_prev->bounce_sg = NULL; + cleanup_queue: - if (mq->sg) - kfree(mq->sg); - mq->sg = NULL; - if (mq->bounce_buf) - kfree(mq->bounce_buf); - mq->bounce_buf = NULL; + kfree(mqrq_cur->sg); + mqrq_cur->sg = NULL; + kfree(mqrq_cur->bounce_buf); + mqrq_cur->bounce_buf = NULL; + + kfree(mqrq_prev->sg); + mqrq_prev->sg = NULL; + kfree(mqrq_prev->bounce_buf); + mqrq_prev->bounce_buf = NULL; + blk_cleanup_queue(mq->queue); return ret; } @@ -238,6 +323,8 @@ void mmc_cleanup_queue(struct mmc_queue *mq) { struct request_queue *q = mq->queue; unsigned long flags; + struct mmc_queue_req *mqrq_cur = mq->mqrq_cur; + struct mmc_queue_req *mqrq_prev = mq->mqrq_prev; /* Make sure the queue isn't suspended, as that will deadlock */ mmc_queue_resume(mq); @@ -251,21 +338,71 @@ void mmc_cleanup_queue(struct mmc_queue *mq) blk_start_queue(q); spin_unlock_irqrestore(q->queue_lock, flags); - if (mq->bounce_sg) - kfree(mq->bounce_sg); - mq->bounce_sg = NULL; + kfree(mqrq_cur->bounce_sg); + mqrq_cur->bounce_sg = NULL; + + kfree(mqrq_cur->sg); + mqrq_cur->sg = NULL; + + kfree(mqrq_cur->bounce_buf); + mqrq_cur->bounce_buf = NULL; - kfree(mq->sg); - mq->sg = NULL; + kfree(mqrq_prev->bounce_sg); + mqrq_prev->bounce_sg = NULL; - if (mq->bounce_buf) - kfree(mq->bounce_buf); - mq->bounce_buf = NULL; + kfree(mqrq_prev->sg); + mqrq_prev->sg = NULL; + + kfree(mqrq_prev->bounce_buf); + mqrq_prev->bounce_buf = NULL; mq->card = NULL; } EXPORT_SYMBOL(mmc_cleanup_queue); +int mmc_packed_init(struct mmc_queue *mq, struct mmc_card *card) +{ + struct mmc_queue_req *mqrq_cur = &mq->mqrq[0]; + struct mmc_queue_req *mqrq_prev = &mq->mqrq[1]; + int ret = 0; + + + mqrq_cur->packed = kzalloc(sizeof(struct mmc_packed), GFP_KERNEL); + if (!mqrq_cur->packed) { + pr_warn("%s: unable to allocate packed cmd for mqrq_cur\n", + mmc_card_name(card)); + ret = -ENOMEM; + goto out; + } + + mqrq_prev->packed = kzalloc(sizeof(struct mmc_packed), GFP_KERNEL); + if (!mqrq_prev->packed) { + pr_warn("%s: unable to allocate packed cmd for mqrq_prev\n", + mmc_card_name(card)); + kfree(mqrq_cur->packed); + mqrq_cur->packed = NULL; + ret = -ENOMEM; + goto out; + } + + INIT_LIST_HEAD(&mqrq_cur->packed->list); + INIT_LIST_HEAD(&mqrq_prev->packed->list); + +out: + return ret; +} + +void mmc_packed_clean(struct mmc_queue *mq) +{ + struct mmc_queue_req *mqrq_cur = &mq->mqrq[0]; + struct mmc_queue_req *mqrq_prev = &mq->mqrq[1]; + + kfree(mqrq_cur->packed); + mqrq_cur->packed = NULL; + kfree(mqrq_prev->packed); + mqrq_prev->packed = NULL; +} + /** * mmc_queue_suspend - suspend a MMC request queue * @mq: MMC queue to suspend @@ -310,30 +447,77 @@ void mmc_queue_resume(struct mmc_queue *mq) } } +static unsigned int mmc_queue_packed_map_sg(struct mmc_queue *mq, + struct mmc_packed *packed, + struct scatterlist *sg, + enum mmc_packed_type cmd_type) +{ + struct scatterlist *__sg = sg; + unsigned int sg_len = 0; + struct request *req; + + if (mmc_packed_wr(cmd_type)) { + unsigned int hdr_sz = mmc_large_sector(mq->card) ? 4096 : 512; + unsigned int max_seg_sz = queue_max_segment_size(mq->queue); + unsigned int len, remain, offset = 0; + u8 *buf = (u8 *)packed->cmd_hdr; + + remain = hdr_sz; + do { + len = min(remain, max_seg_sz); + sg_set_buf(__sg, buf + offset, len); + offset += len; + remain -= len; + (__sg++)->page_link &= ~0x02; + sg_len++; + } while (remain); + } + + list_for_each_entry(req, &packed->list, queuelist) { + sg_len += blk_rq_map_sg(mq->queue, req, __sg); + __sg = sg + (sg_len - 1); + (__sg++)->page_link &= ~0x02; + } + sg_mark_end(sg + (sg_len - 1)); + return sg_len; +} + /* * Prepare the sg list(s) to be handed of to the host driver */ -unsigned int mmc_queue_map_sg(struct mmc_queue *mq) +unsigned int mmc_queue_map_sg(struct mmc_queue *mq, struct mmc_queue_req *mqrq) { unsigned int sg_len; size_t buflen; struct scatterlist *sg; + enum mmc_packed_type cmd_type; int i; - if (!mq->bounce_buf) - return blk_rq_map_sg(mq->queue, mq->req, mq->sg); + cmd_type = mqrq->cmd_type; - BUG_ON(!mq->bounce_sg); + if (!mqrq->bounce_buf) { + if (mmc_packed_cmd(cmd_type)) + return mmc_queue_packed_map_sg(mq, mqrq->packed, + mqrq->sg, cmd_type); + else + return blk_rq_map_sg(mq->queue, mqrq->req, mqrq->sg); + } - sg_len = blk_rq_map_sg(mq->queue, mq->req, mq->bounce_sg); + BUG_ON(!mqrq->bounce_sg); - mq->bounce_sg_len = sg_len; + if (mmc_packed_cmd(cmd_type)) + sg_len = mmc_queue_packed_map_sg(mq, mqrq->packed, + mqrq->bounce_sg, cmd_type); + else + sg_len = blk_rq_map_sg(mq->queue, mqrq->req, mqrq->bounce_sg); + + mqrq->bounce_sg_len = sg_len; buflen = 0; - for_each_sg(mq->bounce_sg, sg, sg_len, i) + for_each_sg(mqrq->bounce_sg, sg, sg_len, i) buflen += sg->length; - sg_init_one(mq->sg, mq->bounce_buf, buflen); + sg_init_one(mqrq->sg, mqrq->bounce_buf, buflen); return 1; } @@ -342,39 +526,30 @@ unsigned int mmc_queue_map_sg(struct mmc_queue *mq) * If writing, bounce the data to the buffer before the request * is sent to the host driver */ -void mmc_queue_bounce_pre(struct mmc_queue *mq) +void mmc_queue_bounce_pre(struct mmc_queue_req *mqrq) { - unsigned long flags; - - if (!mq->bounce_buf) + if (!mqrq->bounce_buf) return; - if (rq_data_dir(mq->req) != WRITE) + if (rq_data_dir(mqrq->req) != WRITE) return; - local_irq_save(flags); - sg_copy_to_buffer(mq->bounce_sg, mq->bounce_sg_len, - mq->bounce_buf, mq->sg[0].length); - local_irq_restore(flags); + sg_copy_to_buffer(mqrq->bounce_sg, mqrq->bounce_sg_len, + mqrq->bounce_buf, mqrq->sg[0].length); } /* * If reading, bounce the data from the buffer after the request * has been handled by the host driver */ -void mmc_queue_bounce_post(struct mmc_queue *mq) +void mmc_queue_bounce_post(struct mmc_queue_req *mqrq) { - unsigned long flags; - - if (!mq->bounce_buf) + if (!mqrq->bounce_buf) return; - if (rq_data_dir(mq->req) != READ) + if (rq_data_dir(mqrq->req) != READ) return; - local_irq_save(flags); - sg_copy_from_buffer(mq->bounce_sg, mq->bounce_sg_len, - mq->bounce_buf, mq->sg[0].length); - local_irq_restore(flags); + sg_copy_from_buffer(mqrq->bounce_sg, mqrq->bounce_sg_len, + mqrq->bounce_buf, mqrq->sg[0].length); } - diff --git a/drivers/mmc/card/queue.h b/drivers/mmc/card/queue.h index 64e66e0d499..5752d50049a 100644 --- a/drivers/mmc/card/queue.h +++ b/drivers/mmc/card/queue.h @@ -1,31 +1,76 @@ #ifndef MMC_QUEUE_H #define MMC_QUEUE_H +#define MMC_REQ_SPECIAL_MASK (REQ_DISCARD | REQ_FLUSH) + struct request; struct task_struct; +struct mmc_blk_request { + struct mmc_request mrq; + struct mmc_command sbc; + struct mmc_command cmd; + struct mmc_command stop; + struct mmc_data data; +}; + +enum mmc_packed_type { + MMC_PACKED_NONE = 0, + MMC_PACKED_WRITE, +}; + +#define mmc_packed_cmd(type) ((type) != MMC_PACKED_NONE) +#define mmc_packed_wr(type) ((type) == MMC_PACKED_WRITE) + +struct mmc_packed { + struct list_head list; + u32 cmd_hdr[1024]; + unsigned int blocks; + u8 nr_entries; + u8 retries; + s16 idx_failure; +}; + +struct mmc_queue_req { + struct request *req; + struct mmc_blk_request brq; + struct scatterlist *sg; + char *bounce_buf; + struct scatterlist *bounce_sg; + unsigned int bounce_sg_len; + struct mmc_async_req mmc_active; + enum mmc_packed_type cmd_type; + struct mmc_packed *packed; +}; + struct mmc_queue { struct mmc_card *card; struct task_struct *thread; struct semaphore thread_sem; unsigned int flags; - struct request *req; +#define MMC_QUEUE_SUSPENDED (1 << 0) +#define MMC_QUEUE_NEW_REQUEST (1 << 1) + int (*issue_fn)(struct mmc_queue *, struct request *); void *data; struct request_queue *queue; - struct scatterlist *sg; - char *bounce_buf; - struct scatterlist *bounce_sg; - unsigned int bounce_sg_len; + struct mmc_queue_req mqrq[2]; + struct mmc_queue_req *mqrq_cur; + struct mmc_queue_req *mqrq_prev; }; -extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *); +extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *, + const char *); extern void mmc_cleanup_queue(struct mmc_queue *); extern void mmc_queue_suspend(struct mmc_queue *); extern void mmc_queue_resume(struct mmc_queue *); -extern unsigned int mmc_queue_map_sg(struct mmc_queue *); -extern void mmc_queue_bounce_pre(struct mmc_queue *); -extern void mmc_queue_bounce_post(struct mmc_queue *); +extern unsigned int mmc_queue_map_sg(struct mmc_queue *, + struct mmc_queue_req *); +extern void mmc_queue_bounce_pre(struct mmc_queue_req *); +extern void mmc_queue_bounce_post(struct mmc_queue_req *); + +extern int mmc_packed_init(struct mmc_queue *, struct mmc_card *); +extern void mmc_packed_clean(struct mmc_queue *); #endif diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c index a0716967b7c..f093cea0d06 100644 --- a/drivers/mmc/card/sdio_uart.c +++ b/drivers/mmc/card/sdio_uart.c @@ -66,8 +66,6 @@ struct uart_icount { struct sdio_uart_port { struct tty_port port; - struct kref kref; - struct tty_struct *tty; unsigned int index; struct sdio_func *func; struct mutex func_lock; @@ -93,7 +91,6 @@ static int sdio_uart_add_port(struct sdio_uart_port *port) { int index, ret = -EBUSY; - kref_init(&port->kref); mutex_init(&port->func_lock); spin_lock_init(&port->write_lock); if (kfifo_alloc(&port->xmit_fifo, FIFO_SIZE, GFP_KERNEL)) @@ -123,29 +120,20 @@ static struct sdio_uart_port *sdio_uart_port_get(unsigned index) spin_lock(&sdio_uart_table_lock); port = sdio_uart_table[index]; if (port) - kref_get(&port->kref); + tty_port_get(&port->port); spin_unlock(&sdio_uart_table_lock); return port; } -static void sdio_uart_port_destroy(struct kref *kref) -{ - struct sdio_uart_port *port = - container_of(kref, struct sdio_uart_port, kref); - kfifo_free(&port->xmit_fifo); - kfree(port); -} - static void sdio_uart_port_put(struct sdio_uart_port *port) { - kref_put(&port->kref, sdio_uart_port_destroy); + tty_port_put(&port->port); } static void sdio_uart_port_remove(struct sdio_uart_port *port) { struct sdio_func *func; - struct tty_struct *tty; BUG_ON(sdio_uart_table[port->index] != port); @@ -166,12 +154,8 @@ static void sdio_uart_port_remove(struct sdio_uart_port *port) sdio_claim_host(func); port->func = NULL; mutex_unlock(&port->func_lock); - tty = tty_port_tty_get(&port->port); /* tty_hangup is async so is this safe as is ?? */ - if (tty) { - tty_hangup(tty); - tty_kref_put(tty); - } + tty_port_tty_hangup(&port->port, false); mutex_unlock(&port->port.mutex); sdio_release_irq(func); sdio_disable_func(func); @@ -392,7 +376,6 @@ static void sdio_uart_stop_rx(struct sdio_uart_port *port) static void sdio_uart_receive_chars(struct sdio_uart_port *port, unsigned int *status) { - struct tty_struct *tty = tty_port_tty_get(&port->port); unsigned int ch, flag; int max_count = 256; @@ -429,23 +412,19 @@ static void sdio_uart_receive_chars(struct sdio_uart_port *port, } if ((*status & port->ignore_status_mask & ~UART_LSR_OE) == 0) - if (tty) - tty_insert_flip_char(tty, ch, flag); + tty_insert_flip_char(&port->port, ch, flag); /* * Overrun is special. Since it's reported immediately, * it doesn't affect the current character. */ if (*status & ~port->ignore_status_mask & UART_LSR_OE) - if (tty) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); *status = sdio_in(port, UART_LSR); } while ((*status & UART_LSR_DR) && (max_count-- > 0)); - if (tty) { - tty_flip_buffer_push(tty); - tty_kref_put(tty); - } + + tty_flip_buffer_push(&port->port); } static void sdio_uart_transmit_chars(struct sdio_uart_port *port) @@ -508,17 +487,13 @@ static void sdio_uart_check_modem_status(struct sdio_uart_port *port) wake_up_interruptible(&port->port.open_wait); else { /* DCD drop - hang up if tty attached */ - tty = tty_port_tty_get(&port->port); - if (tty) { - tty_hangup(tty); - tty_kref_put(tty); - } + tty_port_tty_hangup(&port->port, false); } } if (status & UART_MSR_DCTS) { port->icount.cts++; tty = tty_port_tty_get(&port->port); - if (tty && (tty->termios->c_cflag & CRTSCTS)) { + if (tty && (tty->termios.c_cflag & CRTSCTS)) { int cts = (status & UART_MSR_CTS); if (tty->hw_stopped) { if (cts) { @@ -671,12 +646,12 @@ static int sdio_uart_activate(struct tty_port *tport, struct tty_struct *tty) port->ier = UART_IER_RLSI|UART_IER_RDI|UART_IER_RTOIE|UART_IER_UUE; port->mctrl = TIOCM_OUT2; - sdio_uart_change_speed(port, tty->termios, NULL); + sdio_uart_change_speed(port, &tty->termios, NULL); - if (tty->termios->c_cflag & CBAUD) + if (tty->termios.c_cflag & CBAUD) sdio_uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR); - if (tty->termios->c_cflag & CRTSCTS) + if (tty->termios.c_cflag & CRTSCTS) if (!(sdio_uart_get_mctrl(port) & TIOCM_CTS)) tty->hw_stopped = 1; @@ -737,6 +712,14 @@ static void sdio_uart_shutdown(struct tty_port *tport) sdio_uart_release_func(port); } +static void sdio_uart_port_destroy(struct tty_port *tport) +{ + struct sdio_uart_port *port = + container_of(tport, struct sdio_uart_port, port); + kfifo_free(&port->xmit_fifo); + kfree(port); +} + /** * sdio_uart_install - install method * @driver: the driver in use (sdio_uart in our case) @@ -750,15 +733,12 @@ static int sdio_uart_install(struct tty_driver *driver, struct tty_struct *tty) { int idx = tty->index; struct sdio_uart_port *port = sdio_uart_port_get(idx); - int ret = tty_init_termios(tty); + int ret = tty_standard_install(driver, tty); - if (ret == 0) { - tty_driver_kref_get(driver); - tty->count++; + if (ret == 0) /* This is the ref sdio_uart_port get provided */ tty->driver_data = port; - driver->ttys[idx] = tty; - } else + else sdio_uart_port_put(port); return ret; } @@ -853,7 +833,7 @@ static void sdio_uart_throttle(struct tty_struct *tty) { struct sdio_uart_port *port = tty->driver_data; - if (!I_IXOFF(tty) && !(tty->termios->c_cflag & CRTSCTS)) + if (!I_IXOFF(tty) && !(tty->termios.c_cflag & CRTSCTS)) return; if (sdio_uart_claim_func(port) != 0) @@ -864,7 +844,7 @@ static void sdio_uart_throttle(struct tty_struct *tty) sdio_uart_start_tx(port); } - if (tty->termios->c_cflag & CRTSCTS) + if (tty->termios.c_cflag & CRTSCTS) sdio_uart_clear_mctrl(port, TIOCM_RTS); sdio_uart_irq(port->func); @@ -875,7 +855,7 @@ static void sdio_uart_unthrottle(struct tty_struct *tty) { struct sdio_uart_port *port = tty->driver_data; - if (!I_IXOFF(tty) && !(tty->termios->c_cflag & CRTSCTS)) + if (!I_IXOFF(tty) && !(tty->termios.c_cflag & CRTSCTS)) return; if (sdio_uart_claim_func(port) != 0) @@ -890,7 +870,7 @@ static void sdio_uart_unthrottle(struct tty_struct *tty) } } - if (tty->termios->c_cflag & CRTSCTS) + if (tty->termios.c_cflag & CRTSCTS) sdio_uart_set_mctrl(port, TIOCM_RTS); sdio_uart_irq(port->func); @@ -901,12 +881,12 @@ static void sdio_uart_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { struct sdio_uart_port *port = tty->driver_data; - unsigned int cflag = tty->termios->c_cflag; + unsigned int cflag = tty->termios.c_cflag; if (sdio_uart_claim_func(port) != 0) return; - sdio_uart_change_speed(port, tty->termios, old_termios); + sdio_uart_change_speed(port, &tty->termios, old_termios); /* Handle transition to B0 status */ if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD)) @@ -956,7 +936,7 @@ static int sdio_uart_break_ctl(struct tty_struct *tty, int break_state) return 0; } -static int sdio_uart_tiocmget(struct tty_struct *tty, struct file *file) +static int sdio_uart_tiocmget(struct tty_struct *tty) { struct sdio_uart_port *port = tty->driver_data; int result; @@ -970,7 +950,7 @@ static int sdio_uart_tiocmget(struct tty_struct *tty, struct file *file) return result; } -static int sdio_uart_tiocmset(struct tty_struct *tty, struct file *file, +static int sdio_uart_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct sdio_uart_port *port = tty->driver_data; @@ -1048,6 +1028,7 @@ static const struct tty_port_operations sdio_uart_port_ops = { .carrier_raised = uart_carrier_raised, .shutdown = sdio_uart_shutdown, .activate = sdio_uart_activate, + .destruct = sdio_uart_port_destroy, }; static const struct tty_operations sdio_uart_ops = { @@ -1082,7 +1063,7 @@ static int sdio_uart_probe(struct sdio_func *func, return -ENOMEM; if (func->class == SDIO_CLASS_UART) { - printk(KERN_WARNING "%s: need info on UART class basic setup\n", + pr_warning("%s: need info on UART class basic setup\n", sdio_func_id(func)); kfree(port); return -ENOSYS; @@ -1101,23 +1082,23 @@ static int sdio_uart_probe(struct sdio_func *func, break; } if (!tpl) { - printk(KERN_WARNING + pr_warning( "%s: can't find tuple 0x91 subtuple 0 (SUBTPL_SIOREG) for GPS class\n", sdio_func_id(func)); kfree(port); return -EINVAL; } - printk(KERN_DEBUG "%s: Register ID = 0x%02x, Exp ID = 0x%02x\n", + pr_debug("%s: Register ID = 0x%02x, Exp ID = 0x%02x\n", sdio_func_id(func), tpl->data[2], tpl->data[3]); port->regs_offset = (tpl->data[4] << 0) | (tpl->data[5] << 8) | (tpl->data[6] << 16); - printk(KERN_DEBUG "%s: regs offset = 0x%x\n", + pr_debug("%s: regs offset = 0x%x\n", sdio_func_id(func), port->regs_offset); port->uartclk = tpl->data[7] * 115200; if (port->uartclk == 0) port->uartclk = 115200; - printk(KERN_DEBUG "%s: clk %d baudcode %u 4800-div %u\n", + pr_debug("%s: clk %d baudcode %u 4800-div %u\n", sdio_func_id(func), port->uartclk, tpl->data[7], tpl->data[8] | (tpl->data[9] << 8)); } else { @@ -1135,8 +1116,8 @@ static int sdio_uart_probe(struct sdio_func *func, kfree(port); } else { struct device *dev; - dev = tty_register_device(sdio_uart_tty_driver, - port->index, &func->dev); + dev = tty_port_register_device(&port->port, + sdio_uart_tty_driver, port->index, &func->dev); if (IS_ERR(dev)) { sdio_uart_port_remove(port); ret = PTR_ERR(dev); @@ -1178,7 +1159,6 @@ static int __init sdio_uart_init(void) if (!tty_drv) return -ENOMEM; - tty_drv->owner = THIS_MODULE; tty_drv->driver_name = "sdio_uart"; tty_drv->name = "ttySDIO"; tty_drv->major = 0; /* dynamically allocated */ diff --git a/drivers/mmc/core/Kconfig b/drivers/mmc/core/Kconfig index bb22ffd76ef..9ebee72d9c3 100644 --- a/drivers/mmc/core/Kconfig +++ b/drivers/mmc/core/Kconfig @@ -2,17 +2,12 @@ # MMC core configuration # -config MMC_UNSAFE_RESUME - bool "Assume MMC/SD cards are non-removable (DANGEROUS)" +config MMC_CLKGATE + bool "MMC host clock gating" help - If you say Y here, the MMC layer will assume that all cards - stayed in their respective slots during the suspend. The - normal behaviour is to remove them at suspend and - redetecting them at resume. Breaking this assumption will - in most cases result in data corruption. + This will attempt to aggressively gate the clock to the MMC card. + This is done to save power due to gating off the logic and bus + noise when the MMC card is not in use. Your host driver has to + support handling this in order for it to be of any use. - This option is usually just for embedded systems which use - a MMC/SD card for rootfs. Most people should say N here. - - This option sets a default which can be overridden by the - module parameter "removable=0" or "removable=1". + If unsure, say N. diff --git a/drivers/mmc/core/Makefile b/drivers/mmc/core/Makefile index 86b47911933..38ed210ce2f 100644 --- a/drivers/mmc/core/Makefile +++ b/drivers/mmc/core/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_MMC) += mmc_core.o mmc_core-y := core.o bus.o host.o \ mmc.o mmc_ops.o sd.o sd_ops.o \ sdio.o sdio_ops.o sdio_bus.o \ - sdio_cis.o sdio_io.o sdio_irq.o + sdio_cis.o sdio_io.o sdio_irq.o \ + quirks.o slot-gpio.o mmc_core-$(CONFIG_DEBUG_FS) += debugfs.o diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index af8dc6a2a31..d2dbf02022b 100644 --- a/drivers/mmc/core/bus.c +++ b/drivers/mmc/core/bus.c @@ -11,9 +11,11 @@ * MMC card bus driver model */ +#include <linux/export.h> #include <linux/device.h> #include <linux/err.h> #include <linux/slab.h> +#include <linux/stat.h> #include <linux/pm_runtime.h> #include <linux/mmc/card.h> @@ -25,7 +27,7 @@ #define to_mmc_driver(d) container_of(d, struct mmc_driver, drv) -static ssize_t mmc_type_show(struct device *dev, +static ssize_t type_show(struct device *dev, struct device_attribute *attr, char *buf) { struct mmc_card *card = mmc_dev_to_card(dev); @@ -43,11 +45,13 @@ static ssize_t mmc_type_show(struct device *dev, return -EFAULT; } } +static DEVICE_ATTR_RO(type); -static struct device_attribute mmc_dev_attrs[] = { - __ATTR(type, S_IRUGO, mmc_type_show, NULL), - __ATTR_NULL, +static struct attribute *mmc_dev_attrs[] = { + &dev_attr_type.attr, + NULL, }; +ATTRIBUTE_GROUPS(mmc_dev); /* * This currently matches any MMC driver to any MMC card - drivers @@ -120,14 +124,39 @@ static int mmc_bus_remove(struct device *dev) return 0; } -static int mmc_bus_suspend(struct device *dev, pm_message_t state) +static void mmc_bus_shutdown(struct device *dev) { struct mmc_driver *drv = to_mmc_driver(dev->driver); struct mmc_card *card = mmc_dev_to_card(dev); - int ret = 0; + struct mmc_host *host = card->host; + int ret; + + if (dev->driver && drv->shutdown) + drv->shutdown(card); + + if (host->bus_ops->shutdown) { + ret = host->bus_ops->shutdown(host); + if (ret) + pr_warn("%s: error %d during shutdown\n", + mmc_hostname(host), ret); + } +} + +#ifdef CONFIG_PM_SLEEP +static int mmc_bus_suspend(struct device *dev) +{ + struct mmc_driver *drv = to_mmc_driver(dev->driver); + struct mmc_card *card = mmc_dev_to_card(dev); + struct mmc_host *host = card->host; + int ret; - if (dev->driver && drv->suspend) - ret = drv->suspend(card, state); + if (dev->driver && drv->suspend) { + ret = drv->suspend(card); + if (ret) + return ret; + } + + ret = host->bus_ops->suspend(host); return ret; } @@ -135,58 +164,61 @@ static int mmc_bus_resume(struct device *dev) { struct mmc_driver *drv = to_mmc_driver(dev->driver); struct mmc_card *card = mmc_dev_to_card(dev); - int ret = 0; + struct mmc_host *host = card->host; + int ret; + + ret = host->bus_ops->resume(host); + if (ret) + pr_warn("%s: error %d during resume (card was removed?)\n", + mmc_hostname(host), ret); if (dev->driver && drv->resume) ret = drv->resume(card); + return ret; } +#endif #ifdef CONFIG_PM_RUNTIME static int mmc_runtime_suspend(struct device *dev) { struct mmc_card *card = mmc_dev_to_card(dev); + struct mmc_host *host = card->host; - return mmc_power_save_host(card->host); + return host->bus_ops->runtime_suspend(host); } static int mmc_runtime_resume(struct device *dev) { struct mmc_card *card = mmc_dev_to_card(dev); + struct mmc_host *host = card->host; - return mmc_power_restore_host(card->host); + return host->bus_ops->runtime_resume(host); } static int mmc_runtime_idle(struct device *dev) { - return pm_runtime_suspend(dev); + return 0; } +#endif /* !CONFIG_PM_RUNTIME */ + static const struct dev_pm_ops mmc_bus_pm_ops = { - .runtime_suspend = mmc_runtime_suspend, - .runtime_resume = mmc_runtime_resume, - .runtime_idle = mmc_runtime_idle, + SET_RUNTIME_PM_OPS(mmc_runtime_suspend, mmc_runtime_resume, + mmc_runtime_idle) + SET_SYSTEM_SLEEP_PM_OPS(mmc_bus_suspend, mmc_bus_resume) }; -#define MMC_PM_OPS_PTR (&mmc_bus_pm_ops) - -#else /* !CONFIG_PM_RUNTIME */ - -#define MMC_PM_OPS_PTR NULL - -#endif /* !CONFIG_PM_RUNTIME */ - static struct bus_type mmc_bus_type = { .name = "mmc", - .dev_attrs = mmc_dev_attrs, + .dev_groups = mmc_dev_groups, .match = mmc_bus_match, .uevent = mmc_bus_uevent, .probe = mmc_bus_probe, .remove = mmc_bus_remove, - .suspend = mmc_bus_suspend, - .resume = mmc_bus_resume, - .pm = MMC_PM_OPS_PTR, + .shutdown = mmc_bus_shutdown, + .pm = &mmc_bus_pm_ops, }; int mmc_register_bus(void) @@ -229,8 +261,7 @@ static void mmc_release_card(struct device *dev) sdio_free_common_cis(card); - if (card->info) - kfree(card->info); + kfree(card->info); kfree(card); } @@ -265,6 +296,15 @@ int mmc_add_card(struct mmc_card *card) { int ret; const char *type; + const char *uhs_bus_speed_mode = ""; + static const char *const uhs_speeds[] = { + [UHS_SDR12_BUS_SPEED] = "SDR12 ", + [UHS_SDR25_BUS_SPEED] = "SDR25 ", + [UHS_SDR50_BUS_SPEED] = "SDR50 ", + [UHS_SDR104_BUS_SPEED] = "SDR104 ", + [UHS_DDR50_BUS_SPEED] = "DDR50 ", + }; + dev_set_name(&card->dev, "%s:%04x", mmc_hostname(card->host), card->rca); @@ -274,8 +314,12 @@ int mmc_add_card(struct mmc_card *card) break; case MMC_TYPE_SD: type = "SD"; - if (mmc_card_blockaddr(card)) - type = "SDHC"; + if (mmc_card_blockaddr(card)) { + if (mmc_card_ext_capacity(card)) + type = "SDXC"; + else + type = "SDHC"; + } break; case MMC_TYPE_SDIO: type = "SDIO"; @@ -284,32 +328,41 @@ int mmc_add_card(struct mmc_card *card) type = "SD-combo"; if (mmc_card_blockaddr(card)) type = "SDHC-combo"; + break; default: type = "?"; break; } + if (mmc_card_uhs(card) && + (card->sd_bus_speed < ARRAY_SIZE(uhs_speeds))) + uhs_bus_speed_mode = uhs_speeds[card->sd_bus_speed]; + if (mmc_host_is_spi(card->host)) { - printk(KERN_INFO "%s: new %s%s%s card on SPI\n", + pr_info("%s: new %s%s%s card on SPI\n", mmc_hostname(card->host), - mmc_card_highspeed(card) ? "high speed " : "", - mmc_card_ddr_mode(card) ? "DDR " : "", + mmc_card_hs(card) ? "high speed " : "", + mmc_card_ddr52(card) ? "DDR " : "", type); } else { - printk(KERN_INFO "%s: new %s%s%s card at address %04x\n", + pr_info("%s: new %s%s%s%s%s card at address %04x\n", mmc_hostname(card->host), - mmc_card_highspeed(card) ? "high speed " : "", - mmc_card_ddr_mode(card) ? "DDR " : "", - type, card->rca); + mmc_card_uhs(card) ? "ultra high speed " : + (mmc_card_hs(card) ? "high speed " : ""), + mmc_card_hs400(card) ? "HS400 " : + (mmc_card_hs200(card) ? "HS200 " : ""), + mmc_card_ddr52(card) ? "DDR " : "", + uhs_bus_speed_mode, type, card->rca); } - ret = device_add(&card->dev); - if (ret) - return ret; - #ifdef CONFIG_DEBUG_FS mmc_add_card_debugfs(card); #endif + mmc_init_context_info(card->host); + + ret = device_add(&card->dev); + if (ret) + return ret; mmc_card_set_present(card); @@ -328,10 +381,10 @@ void mmc_remove_card(struct mmc_card *card) if (mmc_card_present(card)) { if (mmc_host_is_spi(card->host)) { - printk(KERN_INFO "%s: SPI card removed\n", + pr_info("%s: SPI card removed\n", mmc_hostname(card->host)); } else { - printk(KERN_INFO "%s: card %04x removed\n", + pr_info("%s: card %04x removed\n", mmc_hostname(card->host), card->rca); } device_del(&card->dev); diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 8f86d702e46..7dc0c85fdb6 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -22,11 +22,19 @@ #include <linux/scatterlist.h> #include <linux/log2.h> #include <linux/regulator/consumer.h> +#include <linux/pm_runtime.h> +#include <linux/pm_wakeup.h> +#include <linux/suspend.h> +#include <linux/fault-inject.h> +#include <linux/random.h> +#include <linux/slab.h> +#include <linux/of.h> #include <linux/mmc/card.h> #include <linux/mmc/host.h> #include <linux/mmc/mmc.h> #include <linux/mmc/sd.h> +#include <linux/mmc/slot-gpio.h> #include "core.h" #include "bus.h" @@ -37,34 +45,27 @@ #include "sd_ops.h" #include "sdio_ops.h" +/* If the device is not responding */ +#define MMC_CORE_TIMEOUT_MS (10 * 60 * 1000) /* 10 minute timeout */ + +/* + * Background operations can take a long time, depending on the housekeeping + * operations the card has to perform. + */ +#define MMC_BKOPS_MAX_TIMEOUT (4 * 60 * 1000) /* max time to wait in ms */ + static struct workqueue_struct *workqueue; +static const unsigned freqs[] = { 400000, 300000, 200000, 100000 }; /* * Enabling software CRCs on the data blocks can be a significant (30%) * performance cost, and for other reasons may not always be desired. * So we allow it it to be disabled. */ -int use_spi_crc = 1; +bool use_spi_crc = 1; module_param(use_spi_crc, bool, 0); /* - * We normally treat cards as removed during suspend if they are not - * known to be on a non-removable bus, to avoid the risk of writing - * back data to a different card after resume. Allow this to be - * overridden if necessary. - */ -#ifdef CONFIG_MMC_UNSAFE_RESUME -int mmc_assume_removable; -#else -int mmc_assume_removable = 1; -#endif -EXPORT_SYMBOL(mmc_assume_removable); -module_param_named(removable, mmc_assume_removable, bool, 0644); -MODULE_PARM_DESC( - removable, - "MMC/SD cards are removable and may be removed during suspend"); - -/* * Internal function. Schedule delayed work in the MMC work queue. */ static int mmc_schedule_delayed_work(struct delayed_work *work, @@ -81,6 +82,43 @@ static void mmc_flush_scheduled_work(void) flush_workqueue(workqueue); } +#ifdef CONFIG_FAIL_MMC_REQUEST + +/* + * Internal function. Inject random data errors. + * If mmc_data is NULL no errors are injected. + */ +static void mmc_should_fail_request(struct mmc_host *host, + struct mmc_request *mrq) +{ + struct mmc_command *cmd = mrq->cmd; + struct mmc_data *data = mrq->data; + static const int data_errors[] = { + -ETIMEDOUT, + -EILSEQ, + -EIO, + }; + + if (!data) + return; + + if (cmd->error || data->error || + !should_fail(&host->fail_mmc_request, data->blksz * data->blocks)) + return; + + data->error = data_errors[prandom_u32() % ARRAY_SIZE(data_errors)]; + data->bytes_xfered = (prandom_u32() % (data->bytes_xfered >> 9)) << 9; +} + +#else /* CONFIG_FAIL_MMC_REQUEST */ + +static inline void mmc_should_fail_request(struct mmc_host *host, + struct mmc_request *mrq) +{ +} + +#endif /* CONFIG_FAIL_MMC_REQUEST */ + /** * mmc_request_done - finish processing an MMC request * @host: MMC host which completed request @@ -99,14 +137,16 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq) cmd->retries = 0; } - if (err && cmd->retries) { - pr_debug("%s: req failed (CMD%u): %d, retrying...\n", - mmc_hostname(host), cmd->opcode, err); - - cmd->retries--; - cmd->error = 0; - host->ops->request(host, mrq); + if (err && cmd->retries && !mmc_card_removed(host->card)) { + /* + * Request starter must handle retries - see + * mmc_wait_for_req_done(). + */ + if (mrq->done) + mrq->done(mrq); } else { + mmc_should_fail_request(host, mrq); + led_trigger_event(host->led, LED_OFF); pr_debug("%s: req done (CMD%u): %d: %08x %08x %08x %08x\n", @@ -130,6 +170,8 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq) if (mrq->done) mrq->done(mrq); + + mmc_host_clk_release(host); } } @@ -143,6 +185,12 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq) struct scatterlist *sg; #endif + if (mrq->sbc) { + pr_debug("<%s: starting CMD%u arg %08x flags %08x>\n", + mmc_hostname(host), mrq->sbc->opcode, + mrq->sbc->arg, mrq->sbc->flags); + } + pr_debug("%s: starting CMD%u arg %08x flags %08x\n", mmc_hostname(host), mrq->cmd->opcode, mrq->cmd->arg, mrq->cmd->flags); @@ -164,8 +212,6 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq) WARN_ON(!host->claimed); - led_trigger_event(host->led, LED_FULL); - mrq->cmd->error = 0; mrq->cmd->mrq = mrq; if (mrq->data) { @@ -190,14 +236,333 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq) mrq->stop->mrq = mrq; } } + mmc_host_clk_hold(host); + led_trigger_event(host->led, LED_FULL); host->ops->request(host, mrq); } +/** + * mmc_start_bkops - start BKOPS for supported cards + * @card: MMC card to start BKOPS + * @form_exception: A flag to indicate if this function was + * called due to an exception raised by the card + * + * Start background operations whenever requested. + * When the urgent BKOPS bit is set in a R1 command response + * then background operations should be started immediately. +*/ +void mmc_start_bkops(struct mmc_card *card, bool from_exception) +{ + int err; + int timeout; + bool use_busy_signal; + + BUG_ON(!card); + + if (!card->ext_csd.bkops_en || mmc_card_doing_bkops(card)) + return; + + err = mmc_read_bkops_status(card); + if (err) { + pr_err("%s: Failed to read bkops status: %d\n", + mmc_hostname(card->host), err); + return; + } + + if (!card->ext_csd.raw_bkops_status) + return; + + if (card->ext_csd.raw_bkops_status < EXT_CSD_BKOPS_LEVEL_2 && + from_exception) + return; + + mmc_claim_host(card->host); + if (card->ext_csd.raw_bkops_status >= EXT_CSD_BKOPS_LEVEL_2) { + timeout = MMC_BKOPS_MAX_TIMEOUT; + use_busy_signal = true; + } else { + timeout = 0; + use_busy_signal = false; + } + + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_BKOPS_START, 1, timeout, + use_busy_signal, true, false); + if (err) { + pr_warn("%s: Error %d starting bkops\n", + mmc_hostname(card->host), err); + goto out; + } + + /* + * For urgent bkops status (LEVEL_2 and more) + * bkops executed synchronously, otherwise + * the operation is in progress + */ + if (!use_busy_signal) + mmc_card_set_doing_bkops(card); +out: + mmc_release_host(card->host); +} +EXPORT_SYMBOL(mmc_start_bkops); + +/* + * mmc_wait_data_done() - done callback for data request + * @mrq: done data request + * + * Wakes up mmc context, passed as a callback to host controller driver + */ +static void mmc_wait_data_done(struct mmc_request *mrq) +{ + mrq->host->context_info.is_done_rcv = true; + wake_up_interruptible(&mrq->host->context_info.wait); +} + static void mmc_wait_done(struct mmc_request *mrq) { - complete(mrq->done_data); + complete(&mrq->completion); } +/* + *__mmc_start_data_req() - starts data request + * @host: MMC host to start the request + * @mrq: data request to start + * + * Sets the done callback to be called when request is completed by the card. + * Starts data mmc request execution + */ +static int __mmc_start_data_req(struct mmc_host *host, struct mmc_request *mrq) +{ + mrq->done = mmc_wait_data_done; + mrq->host = host; + if (mmc_card_removed(host->card)) { + mrq->cmd->error = -ENOMEDIUM; + mmc_wait_data_done(mrq); + return -ENOMEDIUM; + } + mmc_start_request(host, mrq); + + return 0; +} + +static int __mmc_start_req(struct mmc_host *host, struct mmc_request *mrq) +{ + init_completion(&mrq->completion); + mrq->done = mmc_wait_done; + if (mmc_card_removed(host->card)) { + mrq->cmd->error = -ENOMEDIUM; + complete(&mrq->completion); + return -ENOMEDIUM; + } + mmc_start_request(host, mrq); + return 0; +} + +/* + * mmc_wait_for_data_req_done() - wait for request completed + * @host: MMC host to prepare the command. + * @mrq: MMC request to wait for + * + * Blocks MMC context till host controller will ack end of data request + * execution or new request notification arrives from the block layer. + * Handles command retries. + * + * Returns enum mmc_blk_status after checking errors. + */ +static int mmc_wait_for_data_req_done(struct mmc_host *host, + struct mmc_request *mrq, + struct mmc_async_req *next_req) +{ + struct mmc_command *cmd; + struct mmc_context_info *context_info = &host->context_info; + int err; + unsigned long flags; + + while (1) { + wait_event_interruptible(context_info->wait, + (context_info->is_done_rcv || + context_info->is_new_req)); + spin_lock_irqsave(&context_info->lock, flags); + context_info->is_waiting_last_req = false; + spin_unlock_irqrestore(&context_info->lock, flags); + if (context_info->is_done_rcv) { + context_info->is_done_rcv = false; + context_info->is_new_req = false; + cmd = mrq->cmd; + + if (!cmd->error || !cmd->retries || + mmc_card_removed(host->card)) { + err = host->areq->err_check(host->card, + host->areq); + break; /* return err */ + } else { + pr_info("%s: req failed (CMD%u): %d, retrying...\n", + mmc_hostname(host), + cmd->opcode, cmd->error); + cmd->retries--; + cmd->error = 0; + host->ops->request(host, mrq); + continue; /* wait for done/new event again */ + } + } else if (context_info->is_new_req) { + context_info->is_new_req = false; + if (!next_req) { + err = MMC_BLK_NEW_REQUEST; + break; /* return err */ + } + } + } + return err; +} + +static void mmc_wait_for_req_done(struct mmc_host *host, + struct mmc_request *mrq) +{ + struct mmc_command *cmd; + + while (1) { + wait_for_completion(&mrq->completion); + + cmd = mrq->cmd; + + /* + * If host has timed out waiting for the sanitize + * to complete, card might be still in programming state + * so let's try to bring the card out of programming + * state. + */ + if (cmd->sanitize_busy && cmd->error == -ETIMEDOUT) { + if (!mmc_interrupt_hpi(host->card)) { + pr_warning("%s: %s: Interrupted sanitize\n", + mmc_hostname(host), __func__); + cmd->error = 0; + break; + } else { + pr_err("%s: %s: Failed to interrupt sanitize\n", + mmc_hostname(host), __func__); + } + } + if (!cmd->error || !cmd->retries || + mmc_card_removed(host->card)) + break; + + pr_debug("%s: req failed (CMD%u): %d, retrying...\n", + mmc_hostname(host), cmd->opcode, cmd->error); + cmd->retries--; + cmd->error = 0; + host->ops->request(host, mrq); + } +} + +/** + * mmc_pre_req - Prepare for a new request + * @host: MMC host to prepare command + * @mrq: MMC request to prepare for + * @is_first_req: true if there is no previous started request + * that may run in parellel to this call, otherwise false + * + * mmc_pre_req() is called in prior to mmc_start_req() to let + * host prepare for the new request. Preparation of a request may be + * performed while another request is running on the host. + */ +static void mmc_pre_req(struct mmc_host *host, struct mmc_request *mrq, + bool is_first_req) +{ + if (host->ops->pre_req) { + mmc_host_clk_hold(host); + host->ops->pre_req(host, mrq, is_first_req); + mmc_host_clk_release(host); + } +} + +/** + * mmc_post_req - Post process a completed request + * @host: MMC host to post process command + * @mrq: MMC request to post process for + * @err: Error, if non zero, clean up any resources made in pre_req + * + * Let the host post process a completed request. Post processing of + * a request may be performed while another reuqest is running. + */ +static void mmc_post_req(struct mmc_host *host, struct mmc_request *mrq, + int err) +{ + if (host->ops->post_req) { + mmc_host_clk_hold(host); + host->ops->post_req(host, mrq, err); + mmc_host_clk_release(host); + } +} + +/** + * mmc_start_req - start a non-blocking request + * @host: MMC host to start command + * @areq: async request to start + * @error: out parameter returns 0 for success, otherwise non zero + * + * Start a new MMC custom command request for a host. + * If there is on ongoing async request wait for completion + * of that request and start the new one and return. + * Does not wait for the new request to complete. + * + * Returns the completed request, NULL in case of none completed. + * Wait for the an ongoing request (previoulsy started) to complete and + * return the completed request. If there is no ongoing request, NULL + * is returned without waiting. NULL is not an error condition. + */ +struct mmc_async_req *mmc_start_req(struct mmc_host *host, + struct mmc_async_req *areq, int *error) +{ + int err = 0; + int start_err = 0; + struct mmc_async_req *data = host->areq; + + /* Prepare a new request */ + if (areq) + mmc_pre_req(host, areq->mrq, !host->areq); + + if (host->areq) { + err = mmc_wait_for_data_req_done(host, host->areq->mrq, areq); + if (err == MMC_BLK_NEW_REQUEST) { + if (error) + *error = err; + /* + * The previous request was not completed, + * nothing to return + */ + return NULL; + } + /* + * Check BKOPS urgency for each R1 response + */ + if (host->card && mmc_card_mmc(host->card) && + ((mmc_resp_type(host->areq->mrq->cmd) == MMC_RSP_R1) || + (mmc_resp_type(host->areq->mrq->cmd) == MMC_RSP_R1B)) && + (host->areq->mrq->cmd->resp[0] & R1_EXCEPTION_EVENT)) + mmc_start_bkops(host->card, true); + } + + if (!err && areq) + start_err = __mmc_start_data_req(host, areq->mrq); + + if (host->areq) + mmc_post_req(host, host->areq->mrq, 0); + + /* Cancel a prepared request if it was not started. */ + if ((err || start_err) && areq) + mmc_post_req(host, areq->mrq, -EINVAL); + + if (err) + host->areq = NULL; + else + host->areq = areq; + + if (error) + *error = err; + return data; +} +EXPORT_SYMBOL(mmc_start_req); + /** * mmc_wait_for_req - start a request and wait for completion * @host: MMC host to start command @@ -209,17 +574,77 @@ static void mmc_wait_done(struct mmc_request *mrq) */ void mmc_wait_for_req(struct mmc_host *host, struct mmc_request *mrq) { - DECLARE_COMPLETION_ONSTACK(complete); + __mmc_start_req(host, mrq); + mmc_wait_for_req_done(host, mrq); +} +EXPORT_SYMBOL(mmc_wait_for_req); - mrq->done_data = &complete; - mrq->done = mmc_wait_done; +/** + * mmc_interrupt_hpi - Issue for High priority Interrupt + * @card: the MMC card associated with the HPI transfer + * + * Issued High Priority Interrupt, and check for card status + * until out-of prg-state. + */ +int mmc_interrupt_hpi(struct mmc_card *card) +{ + int err; + u32 status; + unsigned long prg_wait; - mmc_start_request(host, mrq); + BUG_ON(!card); - wait_for_completion(&complete); -} + if (!card->ext_csd.hpi_en) { + pr_info("%s: HPI enable bit unset\n", mmc_hostname(card->host)); + return 1; + } -EXPORT_SYMBOL(mmc_wait_for_req); + mmc_claim_host(card->host); + err = mmc_send_status(card, &status); + if (err) { + pr_err("%s: Get card status fail\n", mmc_hostname(card->host)); + goto out; + } + + switch (R1_CURRENT_STATE(status)) { + case R1_STATE_IDLE: + case R1_STATE_READY: + case R1_STATE_STBY: + case R1_STATE_TRAN: + /* + * In idle and transfer states, HPI is not needed and the caller + * can issue the next intended command immediately + */ + goto out; + case R1_STATE_PRG: + break; + default: + /* In all other states, it's illegal to issue HPI */ + pr_debug("%s: HPI cannot be sent. Card state=%d\n", + mmc_hostname(card->host), R1_CURRENT_STATE(status)); + err = -EINVAL; + goto out; + } + + err = mmc_send_hpi_cmd(card, &status); + if (err) + goto out; + + prg_wait = jiffies + msecs_to_jiffies(card->ext_csd.out_of_int_time); + do { + err = mmc_send_status(card, &status); + + if (!err && R1_CURRENT_STATE(status) == R1_STATE_TRAN) + break; + if (time_after(jiffies, prg_wait)) + err = -ETIMEDOUT; + } while (!err); + +out: + mmc_release_host(card->host); + return err; +} +EXPORT_SYMBOL(mmc_interrupt_hpi); /** * mmc_wait_for_cmd - start a command and wait for completion @@ -233,12 +658,10 @@ EXPORT_SYMBOL(mmc_wait_for_req); */ int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd, int retries) { - struct mmc_request mrq; + struct mmc_request mrq = {NULL}; WARN_ON(!host->claimed); - memset(&mrq, 0, sizeof(struct mmc_request)); - memset(cmd->resp, 0, sizeof(cmd->resp)); cmd->retries = retries; @@ -253,6 +676,64 @@ int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd, int retries EXPORT_SYMBOL(mmc_wait_for_cmd); /** + * mmc_stop_bkops - stop ongoing BKOPS + * @card: MMC card to check BKOPS + * + * Send HPI command to stop ongoing background operations to + * allow rapid servicing of foreground operations, e.g. read/ + * writes. Wait until the card comes out of the programming state + * to avoid errors in servicing read/write requests. + */ +int mmc_stop_bkops(struct mmc_card *card) +{ + int err = 0; + + BUG_ON(!card); + err = mmc_interrupt_hpi(card); + + /* + * If err is EINVAL, we can't issue an HPI. + * It should complete the BKOPS. + */ + if (!err || (err == -EINVAL)) { + mmc_card_clr_doing_bkops(card); + err = 0; + } + + return err; +} +EXPORT_SYMBOL(mmc_stop_bkops); + +int mmc_read_bkops_status(struct mmc_card *card) +{ + int err; + u8 *ext_csd; + + /* + * In future work, we should consider storing the entire ext_csd. + */ + ext_csd = kmalloc(512, GFP_KERNEL); + if (!ext_csd) { + pr_err("%s: could not allocate buffer to receive the ext_csd.\n", + mmc_hostname(card->host)); + return -ENOMEM; + } + + mmc_claim_host(card->host); + err = mmc_send_ext_csd(card, ext_csd); + mmc_release_host(card->host); + if (err) + goto out; + + card->ext_csd.raw_bkops_status = ext_csd[EXT_CSD_BKOPS_STATUS]; + card->ext_csd.raw_exception_status = ext_csd[EXT_CSD_EXP_EVENTS_STATUS]; +out: + kfree(ext_csd); + return err; +} +EXPORT_SYMBOL(mmc_read_bkops_status); + +/** * mmc_set_data_timeout - set the timeout for a data command * @data: data phase for command * @card: the MMC card associated with the data transfer @@ -295,15 +776,20 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card) unsigned int timeout_us, limit_us; timeout_us = data->timeout_ns / 1000; - timeout_us += data->timeout_clks * 1000 / - (card->host->ios.clock / 1000); + if (mmc_host_clk_rate(card->host)) + timeout_us += data->timeout_clks * 1000 / + (mmc_host_clk_rate(card->host) / 1000); if (data->flags & MMC_DATA_WRITE) /* - * The limit is really 250 ms, but that is - * insufficient for some crappy cards. + * The MMC spec "It is strongly recommended + * for hosts to implement more than 500ms + * timeout value even if the card indicates + * the 250ms maximum busy length." Even the + * previous value of 300ms is known to be + * insufficient for some cards. */ - limit_us = 300000; + limit_us = 3000000; else limit_us = 100000; @@ -314,7 +800,23 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card) data->timeout_ns = limit_us * 1000; data->timeout_clks = 0; } + + /* assign limit value if invalid */ + if (timeout_us == 0) + data->timeout_ns = limit_us * 1000; + } + + /* + * Some cards require longer data read timeout than indicated in CSD. + * Address this by setting the read timeout to a "reasonably high" + * value. For the cards tested, 300ms has proven enough. If necessary, + * this value can be increased if other problematic cards require this. + */ + if (mmc_card_long_read_time(card) && data->flags & MMC_DATA_READ) { + data->timeout_ns = 300000000; + data->timeout_clks = 0; } + /* * Some cards need very high timeouts if driven in SPI mode. * The worst observed timeout was 900ms after writing a @@ -361,101 +863,6 @@ unsigned int mmc_align_data_size(struct mmc_card *card, unsigned int sz) EXPORT_SYMBOL(mmc_align_data_size); /** - * mmc_host_enable - enable a host. - * @host: mmc host to enable - * - * Hosts that support power saving can use the 'enable' and 'disable' - * methods to exit and enter power saving states. For more information - * see comments for struct mmc_host_ops. - */ -int mmc_host_enable(struct mmc_host *host) -{ - if (!(host->caps & MMC_CAP_DISABLE)) - return 0; - - if (host->en_dis_recurs) - return 0; - - if (host->nesting_cnt++) - return 0; - - cancel_delayed_work_sync(&host->disable); - - if (host->enabled) - return 0; - - if (host->ops->enable) { - int err; - - host->en_dis_recurs = 1; - err = host->ops->enable(host); - host->en_dis_recurs = 0; - - if (err) { - pr_debug("%s: enable error %d\n", - mmc_hostname(host), err); - return err; - } - } - host->enabled = 1; - return 0; -} -EXPORT_SYMBOL(mmc_host_enable); - -static int mmc_host_do_disable(struct mmc_host *host, int lazy) -{ - if (host->ops->disable) { - int err; - - host->en_dis_recurs = 1; - err = host->ops->disable(host, lazy); - host->en_dis_recurs = 0; - - if (err < 0) { - pr_debug("%s: disable error %d\n", - mmc_hostname(host), err); - return err; - } - if (err > 0) { - unsigned long delay = msecs_to_jiffies(err); - - mmc_schedule_delayed_work(&host->disable, delay); - } - } - host->enabled = 0; - return 0; -} - -/** - * mmc_host_disable - disable a host. - * @host: mmc host to disable - * - * Hosts that support power saving can use the 'enable' and 'disable' - * methods to exit and enter power saving states. For more information - * see comments for struct mmc_host_ops. - */ -int mmc_host_disable(struct mmc_host *host) -{ - int err; - - if (!(host->caps & MMC_CAP_DISABLE)) - return 0; - - if (host->en_dis_recurs) - return 0; - - if (--host->nesting_cnt) - return 0; - - if (!host->enabled) - return 0; - - err = mmc_host_do_disable(host, 0); - return err; -} -EXPORT_SYMBOL(mmc_host_disable); - -/** * __mmc_claim_host - exclusively claim a host * @host: mmc host to claim * @abort: whether or not the operation should be aborted @@ -493,39 +900,28 @@ int __mmc_claim_host(struct mmc_host *host, atomic_t *abort) wake_up(&host->wq); spin_unlock_irqrestore(&host->lock, flags); remove_wait_queue(&host->wq, &wait); - if (!stop) - mmc_host_enable(host); + if (host->ops->enable && !stop && host->claim_cnt == 1) + host->ops->enable(host); return stop; } EXPORT_SYMBOL(__mmc_claim_host); /** - * mmc_try_claim_host - try exclusively to claim a host - * @host: mmc host to claim + * mmc_release_host - release a host + * @host: mmc host to release * - * Returns %1 if the host is claimed, %0 otherwise. + * Release a MMC host, allowing others to claim the host + * for their operations. */ -int mmc_try_claim_host(struct mmc_host *host) +void mmc_release_host(struct mmc_host *host) { - int claimed_host = 0; unsigned long flags; - spin_lock_irqsave(&host->lock, flags); - if (!host->claimed || host->claimer == current) { - host->claimed = 1; - host->claimer = current; - host->claim_cnt += 1; - claimed_host = 1; - } - spin_unlock_irqrestore(&host->lock, flags); - return claimed_host; -} -EXPORT_SYMBOL(mmc_try_claim_host); + WARN_ON(!host->claimed); -static void mmc_do_release_host(struct mmc_host *host) -{ - unsigned long flags; + if (host->ops->disable && host->claim_cnt == 1) + host->ops->disable(host); spin_lock_irqsave(&host->lock, flags); if (--host->claim_cnt) { @@ -538,67 +934,30 @@ static void mmc_do_release_host(struct mmc_host *host) wake_up(&host->wq); } } +EXPORT_SYMBOL(mmc_release_host); -void mmc_host_deeper_disable(struct work_struct *work) -{ - struct mmc_host *host = - container_of(work, struct mmc_host, disable.work); - - /* If the host is claimed then we do not want to disable it anymore */ - if (!mmc_try_claim_host(host)) - return; - mmc_host_do_disable(host, 1); - mmc_do_release_host(host); -} - -/** - * mmc_host_lazy_disable - lazily disable a host. - * @host: mmc host to disable - * - * Hosts that support power saving can use the 'enable' and 'disable' - * methods to exit and enter power saving states. For more information - * see comments for struct mmc_host_ops. +/* + * This is a helper function, which fetches a runtime pm reference for the + * card device and also claims the host. */ -int mmc_host_lazy_disable(struct mmc_host *host) +void mmc_get_card(struct mmc_card *card) { - if (!(host->caps & MMC_CAP_DISABLE)) - return 0; - - if (host->en_dis_recurs) - return 0; - - if (--host->nesting_cnt) - return 0; - - if (!host->enabled) - return 0; - - if (host->disable_delay) { - mmc_schedule_delayed_work(&host->disable, - msecs_to_jiffies(host->disable_delay)); - return 0; - } else - return mmc_host_do_disable(host, 1); + pm_runtime_get_sync(&card->dev); + mmc_claim_host(card->host); } -EXPORT_SYMBOL(mmc_host_lazy_disable); +EXPORT_SYMBOL(mmc_get_card); -/** - * mmc_release_host - release a host - * @host: mmc host to release - * - * Release a MMC host, allowing others to claim the host - * for their operations. +/* + * This is a helper function, which releases the host and drops the runtime + * pm reference for the card device. */ -void mmc_release_host(struct mmc_host *host) +void mmc_put_card(struct mmc_card *card) { - WARN_ON(!host->claimed); - - mmc_host_lazy_disable(host); - - mmc_do_release_host(host); + mmc_release_host(card->host); + pm_runtime_mark_last_busy(&card->dev); + pm_runtime_put_autosuspend(&card->dev); } - -EXPORT_SYMBOL(mmc_release_host); +EXPORT_SYMBOL(mmc_put_card); /* * Internal function that does the actual ios call to the host driver, @@ -614,6 +973,8 @@ static inline void mmc_set_ios(struct mmc_host *host) ios->power_mode, ios->chip_select, ios->vdd, ios->bus_width, ios->timing); + if (ios->clock > 0) + mmc_set_ungated(host); host->ops->set_ios(host, ios); } @@ -622,15 +983,17 @@ static inline void mmc_set_ios(struct mmc_host *host) */ void mmc_set_chip_select(struct mmc_host *host, int mode) { + mmc_host_clk_hold(host); host->ios.chip_select = mode; mmc_set_ios(host); + mmc_host_clk_release(host); } /* * Sets the host clock to the highest possible frequency that * is below "hz". */ -void mmc_set_clock(struct mmc_host *host, unsigned int hz) +static void __mmc_set_clock(struct mmc_host *host, unsigned int hz) { WARN_ON(hz < host->f_min); @@ -641,24 +1004,77 @@ void mmc_set_clock(struct mmc_host *host, unsigned int hz) mmc_set_ios(host); } +void mmc_set_clock(struct mmc_host *host, unsigned int hz) +{ + mmc_host_clk_hold(host); + __mmc_set_clock(host, hz); + mmc_host_clk_release(host); +} + +#ifdef CONFIG_MMC_CLKGATE /* - * Change the bus mode (open drain/push-pull) of a host. + * This gates the clock by setting it to 0 Hz. */ -void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode) +void mmc_gate_clock(struct mmc_host *host) { - host->ios.bus_mode = mode; + unsigned long flags; + + spin_lock_irqsave(&host->clk_lock, flags); + host->clk_old = host->ios.clock; + host->ios.clock = 0; + host->clk_gated = true; + spin_unlock_irqrestore(&host->clk_lock, flags); mmc_set_ios(host); } /* - * Change data bus width and DDR mode of a host. + * This restores the clock from gating by using the cached + * clock value. */ -void mmc_set_bus_width_ddr(struct mmc_host *host, unsigned int width, - unsigned int ddr) +void mmc_ungate_clock(struct mmc_host *host) { - host->ios.bus_width = width; - host->ios.ddr = ddr; + /* + * We should previously have gated the clock, so the clock shall + * be 0 here! The clock may however be 0 during initialization, + * when some request operations are performed before setting + * the frequency. When ungate is requested in that situation + * we just ignore the call. + */ + if (host->clk_old) { + BUG_ON(host->ios.clock); + /* This call will also set host->clk_gated to false */ + __mmc_set_clock(host, host->clk_old); + } +} + +void mmc_set_ungated(struct mmc_host *host) +{ + unsigned long flags; + + /* + * We've been given a new frequency while the clock is gated, + * so make sure we regard this as ungating it. + */ + spin_lock_irqsave(&host->clk_lock, flags); + host->clk_gated = false; + spin_unlock_irqrestore(&host->clk_lock, flags); +} + +#else +void mmc_set_ungated(struct mmc_host *host) +{ +} +#endif + +/* + * Change the bus mode (open drain/push-pull) of a host. + */ +void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode) +{ + mmc_host_clk_hold(host); + host->ios.bus_mode = mode; mmc_set_ios(host); + mmc_host_clk_release(host); } /* @@ -666,7 +1082,10 @@ void mmc_set_bus_width_ddr(struct mmc_host *host, unsigned int width, */ void mmc_set_bus_width(struct mmc_host *host, unsigned int width) { - mmc_set_bus_width_ddr(host, width, MMC_SDR_MODE); + mmc_host_clk_hold(host); + host->ios.bus_width = width; + mmc_set_ios(host); + mmc_host_clk_release(host); } /** @@ -743,6 +1162,49 @@ u32 mmc_vddrange_to_ocrmask(int vdd_min, int vdd_max) } EXPORT_SYMBOL(mmc_vddrange_to_ocrmask); +#ifdef CONFIG_OF + +/** + * mmc_of_parse_voltage - return mask of supported voltages + * @np: The device node need to be parsed. + * @mask: mask of voltages available for MMC/SD/SDIO + * + * 1. Return zero on success. + * 2. Return negative errno: voltage-range is invalid. + */ +int mmc_of_parse_voltage(struct device_node *np, u32 *mask) +{ + const u32 *voltage_ranges; + int num_ranges, i; + + voltage_ranges = of_get_property(np, "voltage-ranges", &num_ranges); + num_ranges = num_ranges / sizeof(*voltage_ranges) / 2; + if (!voltage_ranges || !num_ranges) { + pr_info("%s: voltage-ranges unspecified\n", np->full_name); + return -EINVAL; + } + + for (i = 0; i < num_ranges; i++) { + const int j = i * 2; + u32 ocr_mask; + + ocr_mask = mmc_vddrange_to_ocrmask( + be32_to_cpu(voltage_ranges[j]), + be32_to_cpu(voltage_ranges[j + 1])); + if (!ocr_mask) { + pr_err("%s: voltage-range #%d is invalid\n", + np->full_name, i); + return -EINVAL; + } + *mask |= ocr_mask; + } + + return 0; +} +EXPORT_SYMBOL(mmc_of_parse_voltage); + +#endif /* CONFIG_OF */ + #ifdef CONFIG_REGULATOR /** @@ -778,7 +1240,7 @@ int mmc_regulator_get_ocrmask(struct regulator *supply) return result; } -EXPORT_SYMBOL(mmc_regulator_get_ocrmask); +EXPORT_SYMBOL_GPL(mmc_regulator_get_ocrmask); /** * mmc_regulator_set_ocr - set regulator to match host->ios voltage @@ -803,7 +1265,8 @@ int mmc_regulator_set_ocr(struct mmc_host *mmc, int tmp; int voltage; - /* REVISIT mmc_vddrange_to_ocrmask() may have set some + /* + * REVISIT mmc_vddrange_to_ocrmask() may have set some * bits this regulator doesn't quite support ... don't * be too picky, most cards and regulators are OK with * a 0.1V range goof (it's a small error percentage). @@ -817,10 +1280,15 @@ int mmc_regulator_set_ocr(struct mmc_host *mmc, max_uV = min_uV + 100 * 1000; } - /* avoid needless changes to this voltage; the regulator - * might not allow this operation + /* + * If we're using a fixed/static regulator, don't call + * regulator_set_voltage; it would fail. */ voltage = regulator_get_voltage(supply); + + if (!regulator_can_change_voltage(supply)) + min_uV = max_uV = voltage; + if (voltage < 0) result = voltage; else if (voltage < min_uV || voltage > max_uV) @@ -844,10 +1312,40 @@ int mmc_regulator_set_ocr(struct mmc_host *mmc, "could not set regulator OCR (%d)\n", result); return result; } -EXPORT_SYMBOL(mmc_regulator_set_ocr); +EXPORT_SYMBOL_GPL(mmc_regulator_set_ocr); #endif /* CONFIG_REGULATOR */ +int mmc_regulator_get_supply(struct mmc_host *mmc) +{ + struct device *dev = mmc_dev(mmc); + int ret; + + mmc->supply.vmmc = devm_regulator_get_optional(dev, "vmmc"); + mmc->supply.vqmmc = devm_regulator_get_optional(dev, "vqmmc"); + + if (IS_ERR(mmc->supply.vmmc)) { + if (PTR_ERR(mmc->supply.vmmc) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_info(dev, "No vmmc regulator found\n"); + } else { + ret = mmc_regulator_get_ocrmask(mmc->supply.vmmc); + if (ret > 0) + mmc->ocr_avail = ret; + else + dev_warn(dev, "Failed getting OCR mask: %d\n", ret); + } + + if (IS_ERR(mmc->supply.vqmmc)) { + if (PTR_ERR(mmc->supply.vqmmc) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_info(dev, "No vqmmc regulator found\n"); + } + + return 0; +} +EXPORT_SYMBOL_GPL(mmc_regulator_get_supply); + /* * Mask off any voltages we don't support and select * the lowest voltage @@ -856,32 +1354,165 @@ u32 mmc_select_voltage(struct mmc_host *host, u32 ocr) { int bit; - ocr &= host->ocr_avail; + /* + * Sanity check the voltages that the card claims to + * support. + */ + if (ocr & 0x7F) { + dev_warn(mmc_dev(host), + "card claims to support voltages below defined range\n"); + ocr &= ~0x7F; + } - bit = ffs(ocr); - if (bit) { - bit -= 1; + ocr &= host->ocr_avail; + if (!ocr) { + dev_warn(mmc_dev(host), "no support for card's volts\n"); + return 0; + } + if (host->caps2 & MMC_CAP2_FULL_PWR_CYCLE) { + bit = ffs(ocr) - 1; ocr &= 3 << bit; - - host->ios.vdd = bit; - mmc_set_ios(host); + mmc_power_cycle(host, ocr); } else { - pr_warning("%s: host doesn't support card's voltages\n", - mmc_hostname(host)); - ocr = 0; + bit = fls(ocr) - 1; + ocr &= 3 << bit; + if (bit != host->ios.vdd) + dev_warn(mmc_dev(host), "exceeding card's volts\n"); } return ocr; } +int __mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage) +{ + int err = 0; + int old_signal_voltage = host->ios.signal_voltage; + + host->ios.signal_voltage = signal_voltage; + if (host->ops->start_signal_voltage_switch) { + mmc_host_clk_hold(host); + err = host->ops->start_signal_voltage_switch(host, &host->ios); + mmc_host_clk_release(host); + } + + if (err) + host->ios.signal_voltage = old_signal_voltage; + + return err; + +} + +int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, u32 ocr) +{ + struct mmc_command cmd = {0}; + int err = 0; + u32 clock; + + BUG_ON(!host); + + /* + * Send CMD11 only if the request is to switch the card to + * 1.8V signalling. + */ + if (signal_voltage == MMC_SIGNAL_VOLTAGE_330) + return __mmc_set_signal_voltage(host, signal_voltage); + + /* + * If we cannot switch voltages, return failure so the caller + * can continue without UHS mode + */ + if (!host->ops->start_signal_voltage_switch) + return -EPERM; + if (!host->ops->card_busy) + pr_warning("%s: cannot verify signal voltage switch\n", + mmc_hostname(host)); + + cmd.opcode = SD_SWITCH_VOLTAGE; + cmd.arg = 0; + cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) + return err; + + if (!mmc_host_is_spi(host) && (cmd.resp[0] & R1_ERROR)) + return -EIO; + + mmc_host_clk_hold(host); + /* + * The card should drive cmd and dat[0:3] low immediately + * after the response of cmd11, but wait 1 ms to be sure + */ + mmc_delay(1); + if (host->ops->card_busy && !host->ops->card_busy(host)) { + err = -EAGAIN; + goto power_cycle; + } + /* + * During a signal voltage level switch, the clock must be gated + * for 5 ms according to the SD spec + */ + clock = host->ios.clock; + host->ios.clock = 0; + mmc_set_ios(host); + + if (__mmc_set_signal_voltage(host, signal_voltage)) { + /* + * Voltages may not have been switched, but we've already + * sent CMD11, so a power cycle is required anyway + */ + err = -EAGAIN; + goto power_cycle; + } + + /* Keep clock gated for at least 5 ms */ + mmc_delay(5); + host->ios.clock = clock; + mmc_set_ios(host); + + /* Wait for at least 1 ms according to spec */ + mmc_delay(1); + + /* + * Failure to switch is indicated by the card holding + * dat[0:3] low + */ + if (host->ops->card_busy && host->ops->card_busy(host)) + err = -EAGAIN; + +power_cycle: + if (err) { + pr_debug("%s: Signal voltage switch failed, " + "power cycling card\n", mmc_hostname(host)); + mmc_power_cycle(host, ocr); + } + + mmc_host_clk_release(host); + + return err; +} + /* * Select timing parameters for host. */ void mmc_set_timing(struct mmc_host *host, unsigned int timing) { + mmc_host_clk_hold(host); host->ios.timing = timing; mmc_set_ios(host); + mmc_host_clk_release(host); +} + +/* + * Select appropriate driver type for host. + */ +void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type) +{ + mmc_host_clk_hold(host); + host->ios.drv_type = drv_type; + mmc_set_ios(host); + mmc_host_clk_release(host); } /* @@ -895,29 +1526,32 @@ void mmc_set_timing(struct mmc_host *host, unsigned int timing) * If a host does all the power sequencing itself, ignore the * initial MMC_POWER_UP stage. */ -static void mmc_power_up(struct mmc_host *host) +void mmc_power_up(struct mmc_host *host, u32 ocr) { - int bit; + if (host->ios.power_mode == MMC_POWER_ON) + return; - /* If ocr is set, we use it */ - if (host->ocr) - bit = ffs(host->ocr) - 1; - else - bit = fls(host->ocr_avail) - 1; + mmc_host_clk_hold(host); - host->ios.vdd = bit; - if (mmc_host_is_spi(host)) { + host->ios.vdd = fls(ocr) - 1; + if (mmc_host_is_spi(host)) host->ios.chip_select = MMC_CS_HIGH; - host->ios.bus_mode = MMC_BUSMODE_PUSHPULL; - } else { + else host->ios.chip_select = MMC_CS_DONTCARE; - host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN; - } + host->ios.bus_mode = MMC_BUSMODE_PUSHPULL; host->ios.power_mode = MMC_POWER_UP; host->ios.bus_width = MMC_BUS_WIDTH_1; host->ios.timing = MMC_TIMING_LEGACY; mmc_set_ios(host); + /* Try to set signal voltage to 3.3V but fall back to 1.8v or 1.2v */ + if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330) == 0) + dev_dbg(mmc_dev(host), "Initial signal voltage of 3.3v\n"); + else if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180) == 0) + dev_dbg(mmc_dev(host), "Initial signal voltage of 1.8v\n"); + else if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120) == 0) + dev_dbg(mmc_dev(host), "Initial signal voltage of 1.2v\n"); + /* * This delay should be sufficient to allow the power supply * to reach the minimum voltage. @@ -934,12 +1568,20 @@ static void mmc_power_up(struct mmc_host *host) * time required to reach a stable voltage. */ mmc_delay(10); + + mmc_host_clk_release(host); } -static void mmc_power_off(struct mmc_host *host) +void mmc_power_off(struct mmc_host *host) { + if (host->ios.power_mode == MMC_POWER_OFF) + return; + + mmc_host_clk_hold(host); + host->ios.clock = 0; host->ios.vdd = 0; + if (!mmc_host_is_spi(host)) { host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN; host->ios.chip_select = MMC_CS_DONTCARE; @@ -948,6 +1590,23 @@ static void mmc_power_off(struct mmc_host *host) host->ios.bus_width = MMC_BUS_WIDTH_1; host->ios.timing = MMC_TIMING_LEGACY; mmc_set_ios(host); + + /* + * Some configurations, such as the 802.11 SDIO card in the OLPC + * XO-1.5, require a short delay after poweroff before the card + * can be successfully turned on again. + */ + mmc_delay(1); + + mmc_host_clk_release(host); +} + +void mmc_power_cycle(struct mmc_host *host, u32 ocr) +{ + mmc_power_off(host); + /* Wait at least 1 ms according to SD spec */ + mmc_delay(1); + mmc_power_up(host, ocr); } /* @@ -1015,8 +1674,7 @@ void mmc_attach_bus(struct mmc_host *host, const struct mmc_bus_ops *ops) } /* - * Remove the current bus handler from a host. Assumes that there are - * no interesting cards left, so the bus is powered down. + * Remove the current bus handler from a host. */ void mmc_detach_bus(struct mmc_host *host) { @@ -1033,11 +1691,31 @@ void mmc_detach_bus(struct mmc_host *host) spin_unlock_irqrestore(&host->lock, flags); - mmc_power_off(host); - mmc_bus_put(host); } +static void _mmc_detect_change(struct mmc_host *host, unsigned long delay, + bool cd_irq) +{ +#ifdef CONFIG_MMC_DEBUG + unsigned long flags; + spin_lock_irqsave(&host->lock, flags); + WARN_ON(host->removed); + spin_unlock_irqrestore(&host->lock, flags); +#endif + + /* + * If the device is configured as wakeup, we prevent a new sleep for + * 5 s to give provision for user space to consume the event. + */ + if (cd_irq && !(host->caps & MMC_CAP_NEEDS_POLL) && + device_can_wakeup(mmc_dev(host))) + pm_wakeup_event(mmc_dev(host), 5000); + + host->detect_change = 1; + mmc_schedule_delayed_work(&host->detect, delay); +} + /** * mmc_detect_change - process change of state on a MMC socket * @host: host which changed state. @@ -1050,16 +1728,8 @@ void mmc_detach_bus(struct mmc_host *host) */ void mmc_detect_change(struct mmc_host *host, unsigned long delay) { -#ifdef CONFIG_MMC_DEBUG - unsigned long flags; - spin_lock_irqsave(&host->lock, flags); - WARN_ON(host->removed); - spin_unlock_irqrestore(&host->lock, flags); -#endif - - mmc_schedule_delayed_work(&host->detect, delay); + _mmc_detect_change(host, delay, true); } - EXPORT_SYMBOL(mmc_detect_change); void mmc_init_erase(struct mmc_card *card) @@ -1111,13 +1781,15 @@ void mmc_init_erase(struct mmc_card *card) } } -static void mmc_set_mmc_erase_timeout(struct mmc_card *card, - struct mmc_command *cmd, - unsigned int arg, unsigned int qty) +static unsigned int mmc_mmc_erase_timeout(struct mmc_card *card, + unsigned int arg, unsigned int qty) { unsigned int erase_timeout; - if (card->ext_csd.erase_group_def & 1) { + if (arg == MMC_DISCARD_ARG || + (arg == MMC_TRIM_ARG && card->ext_csd.rev >= 6)) { + erase_timeout = card->ext_csd.trim_timeout; + } else if (card->ext_csd.erase_group_def & 1) { /* High Capacity Erase Group Size uses HC timeouts */ if (arg == MMC_TRIM_ARG) erase_timeout = card->ext_csd.trim_timeout; @@ -1141,7 +1813,7 @@ static void mmc_set_mmc_erase_timeout(struct mmc_card *card, */ timeout_clks <<= 1; timeout_us += (timeout_clks * 1000) / - (card->host->ios.clock / 1000); + (mmc_host_clk_rate(card->host) / 1000); erase_timeout = timeout_us / 1000; @@ -1170,45 +1842,50 @@ static void mmc_set_mmc_erase_timeout(struct mmc_card *card, if (mmc_host_is_spi(card->host) && erase_timeout < 1000) erase_timeout = 1000; - cmd->erase_timeout = erase_timeout; + return erase_timeout; } -static void mmc_set_sd_erase_timeout(struct mmc_card *card, - struct mmc_command *cmd, unsigned int arg, - unsigned int qty) +static unsigned int mmc_sd_erase_timeout(struct mmc_card *card, + unsigned int arg, + unsigned int qty) { + unsigned int erase_timeout; + if (card->ssr.erase_timeout) { /* Erase timeout specified in SD Status Register (SSR) */ - cmd->erase_timeout = card->ssr.erase_timeout * qty + - card->ssr.erase_offset; + erase_timeout = card->ssr.erase_timeout * qty + + card->ssr.erase_offset; } else { /* * Erase timeout not specified in SD Status Register (SSR) so * use 250ms per write block. */ - cmd->erase_timeout = 250 * qty; + erase_timeout = 250 * qty; } /* Must not be less than 1 second */ - if (cmd->erase_timeout < 1000) - cmd->erase_timeout = 1000; + if (erase_timeout < 1000) + erase_timeout = 1000; + + return erase_timeout; } -static void mmc_set_erase_timeout(struct mmc_card *card, - struct mmc_command *cmd, unsigned int arg, - unsigned int qty) +static unsigned int mmc_erase_timeout(struct mmc_card *card, + unsigned int arg, + unsigned int qty) { if (mmc_card_sd(card)) - mmc_set_sd_erase_timeout(card, cmd, arg, qty); + return mmc_sd_erase_timeout(card, arg, qty); else - mmc_set_mmc_erase_timeout(card, cmd, arg, qty); + return mmc_mmc_erase_timeout(card, arg, qty); } static int mmc_do_erase(struct mmc_card *card, unsigned int from, unsigned int to, unsigned int arg) { - struct mmc_command cmd; + struct mmc_command cmd = {0}; unsigned int qty = 0; + unsigned long timeout; int err; /* @@ -1241,7 +1918,6 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from, to <<= 9; } - memset(&cmd, 0, sizeof(struct mmc_command)); if (mmc_card_sd(card)) cmd.opcode = SD_ERASE_WR_BLK_START; else @@ -1250,9 +1926,9 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from, cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; err = mmc_wait_for_cmd(card->host, &cmd, 0); if (err) { - printk(KERN_ERR "mmc_erase: group start error %d, " + pr_err("mmc_erase: group start error %d, " "status %#x\n", err, cmd.resp[0]); - err = -EINVAL; + err = -EIO; goto out; } @@ -1265,9 +1941,9 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from, cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; err = mmc_wait_for_cmd(card->host, &cmd, 0); if (err) { - printk(KERN_ERR "mmc_erase: group end error %d, status %#x\n", + pr_err("mmc_erase: group end error %d, status %#x\n", err, cmd.resp[0]); - err = -EINVAL; + err = -EIO; goto out; } @@ -1275,10 +1951,10 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from, cmd.opcode = MMC_ERASE; cmd.arg = arg; cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; - mmc_set_erase_timeout(card, &cmd, arg, qty); + cmd.busy_timeout = mmc_erase_timeout(card, arg, qty); err = mmc_wait_for_cmd(card->host, &cmd, 0); if (err) { - printk(KERN_ERR "mmc_erase: erase error %d, status %#x\n", + pr_err("mmc_erase: erase error %d, status %#x\n", err, cmd.resp[0]); err = -EIO; goto out; @@ -1287,6 +1963,7 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from, if (mmc_host_is_spi(card->host)) goto out; + timeout = jiffies + msecs_to_jiffies(MMC_CORE_TIMEOUT_MS); do { memset(&cmd, 0, sizeof(struct mmc_command)); cmd.opcode = MMC_SEND_STATUS; @@ -1295,13 +1972,24 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from, /* Do not retry else we can't see errors */ err = mmc_wait_for_cmd(card->host, &cmd, 0); if (err || (cmd.resp[0] & 0xFDF92000)) { - printk(KERN_ERR "error %d requesting status %#x\n", + pr_err("error %d requesting status %#x\n", err, cmd.resp[0]); err = -EIO; goto out; } + + /* Timeout if the device never becomes ready for data and + * never leaves the program state. + */ + if (time_after(jiffies, timeout)) { + pr_err("%s: Card stuck in programming state! %s\n", + mmc_hostname(card->host), __func__); + err = -EIO; + goto out; + } + } while (!(cmd.resp[0] & R1_READY_FOR_DATA) || - R1_CURRENT_STATE(cmd.resp[0]) == 7); + (R1_CURRENT_STATE(cmd.resp[0]) == R1_STATE_PRG)); out: return err; } @@ -1390,6 +2078,28 @@ int mmc_can_trim(struct mmc_card *card) } EXPORT_SYMBOL(mmc_can_trim); +int mmc_can_discard(struct mmc_card *card) +{ + /* + * As there's no way to detect the discard support bit at v4.5 + * use the s/w feature support filed. + */ + if (card->ext_csd.feature_support & MMC_DISCARD_FEATURE) + return 1; + return 0; +} +EXPORT_SYMBOL(mmc_can_discard); + +int mmc_can_sanitize(struct mmc_card *card) +{ + if (!mmc_can_trim(card) && !mmc_can_erase(card)) + return 0; + if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_SANITIZE) + return 1; + return 0; +} +EXPORT_SYMBOL(mmc_can_sanitize); + int mmc_can_secure_erase_trim(struct mmc_card *card) { if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_ER_EN) @@ -1409,14 +2119,89 @@ int mmc_erase_group_aligned(struct mmc_card *card, unsigned int from, } EXPORT_SYMBOL(mmc_erase_group_aligned); +static unsigned int mmc_do_calc_max_discard(struct mmc_card *card, + unsigned int arg) +{ + struct mmc_host *host = card->host; + unsigned int max_discard, x, y, qty = 0, max_qty, timeout; + unsigned int last_timeout = 0; + + if (card->erase_shift) + max_qty = UINT_MAX >> card->erase_shift; + else if (mmc_card_sd(card)) + max_qty = UINT_MAX; + else + max_qty = UINT_MAX / card->erase_size; + + /* Find the largest qty with an OK timeout */ + do { + y = 0; + for (x = 1; x && x <= max_qty && max_qty - x >= qty; x <<= 1) { + timeout = mmc_erase_timeout(card, arg, qty + x); + if (timeout > host->max_busy_timeout) + break; + if (timeout < last_timeout) + break; + last_timeout = timeout; + y = x; + } + qty += y; + } while (y); + + if (!qty) + return 0; + + if (qty == 1) + return 1; + + /* Convert qty to sectors */ + if (card->erase_shift) + max_discard = --qty << card->erase_shift; + else if (mmc_card_sd(card)) + max_discard = qty; + else + max_discard = --qty * card->erase_size; + + return max_discard; +} + +unsigned int mmc_calc_max_discard(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + unsigned int max_discard, max_trim; + + if (!host->max_busy_timeout) + return UINT_MAX; + + /* + * Without erase_group_def set, MMC erase timeout depends on clock + * frequence which can change. In that case, the best choice is + * just the preferred erase size. + */ + if (mmc_card_mmc(card) && !(card->ext_csd.erase_group_def & 1)) + return card->pref_erase; + + max_discard = mmc_do_calc_max_discard(card, MMC_ERASE_ARG); + if (mmc_can_trim(card)) { + max_trim = mmc_do_calc_max_discard(card, MMC_TRIM_ARG); + if (max_trim < max_discard) + max_discard = max_trim; + } else if (max_discard < card->erase_size) { + max_discard = 0; + } + pr_debug("%s: calculated max. discard sectors %u for timeout %u ms\n", + mmc_hostname(host), max_discard, host->max_busy_timeout); + return max_discard; +} +EXPORT_SYMBOL(mmc_calc_max_discard); + int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen) { - struct mmc_command cmd; + struct mmc_command cmd = {0}; - if (mmc_card_blockaddr(card) || mmc_card_ddr_mode(card)) + if (mmc_card_blockaddr(card) || mmc_card_ddr52(card)) return 0; - memset(&cmd, 0, sizeof(struct mmc_command)); cmd.opcode = MMC_SET_BLOCKLEN; cmd.arg = blocklen; cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; @@ -1424,35 +2209,245 @@ int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen) } EXPORT_SYMBOL(mmc_set_blocklen); +int mmc_set_blockcount(struct mmc_card *card, unsigned int blockcount, + bool is_rel_write) +{ + struct mmc_command cmd = {0}; + + cmd.opcode = MMC_SET_BLOCK_COUNT; + cmd.arg = blockcount & 0x0000FFFF; + if (is_rel_write) + cmd.arg |= 1 << 31; + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; + return mmc_wait_for_cmd(card->host, &cmd, 5); +} +EXPORT_SYMBOL(mmc_set_blockcount); + +static void mmc_hw_reset_for_init(struct mmc_host *host) +{ + if (!(host->caps & MMC_CAP_HW_RESET) || !host->ops->hw_reset) + return; + mmc_host_clk_hold(host); + host->ops->hw_reset(host); + mmc_host_clk_release(host); +} + +int mmc_can_reset(struct mmc_card *card) +{ + u8 rst_n_function; + + if (!mmc_card_mmc(card)) + return 0; + rst_n_function = card->ext_csd.rst_n_function; + if ((rst_n_function & EXT_CSD_RST_N_EN_MASK) != EXT_CSD_RST_N_ENABLED) + return 0; + return 1; +} +EXPORT_SYMBOL(mmc_can_reset); + +static int mmc_do_hw_reset(struct mmc_host *host, int check) +{ + struct mmc_card *card = host->card; + + if (!(host->caps & MMC_CAP_HW_RESET) || !host->ops->hw_reset) + return -EOPNOTSUPP; + + if (!card) + return -EINVAL; + + if (!mmc_can_reset(card)) + return -EOPNOTSUPP; + + mmc_host_clk_hold(host); + mmc_set_clock(host, host->f_init); + + host->ops->hw_reset(host); + + /* If the reset has happened, then a status command will fail */ + if (check) { + struct mmc_command cmd = {0}; + int err; + + cmd.opcode = MMC_SEND_STATUS; + if (!mmc_host_is_spi(card->host)) + cmd.arg = card->rca << 16; + cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC; + err = mmc_wait_for_cmd(card->host, &cmd, 0); + if (!err) { + mmc_host_clk_release(host); + return -ENOSYS; + } + } + + if (mmc_host_is_spi(host)) { + host->ios.chip_select = MMC_CS_HIGH; + host->ios.bus_mode = MMC_BUSMODE_PUSHPULL; + } else { + host->ios.chip_select = MMC_CS_DONTCARE; + host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN; + } + host->ios.bus_width = MMC_BUS_WIDTH_1; + host->ios.timing = MMC_TIMING_LEGACY; + mmc_set_ios(host); + + mmc_host_clk_release(host); + + return host->bus_ops->power_restore(host); +} + +int mmc_hw_reset(struct mmc_host *host) +{ + return mmc_do_hw_reset(host, 0); +} +EXPORT_SYMBOL(mmc_hw_reset); + +int mmc_hw_reset_check(struct mmc_host *host) +{ + return mmc_do_hw_reset(host, 1); +} +EXPORT_SYMBOL(mmc_hw_reset_check); + +static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq) +{ + host->f_init = freq; + +#ifdef CONFIG_MMC_DEBUG + pr_info("%s: %s: trying to init card at %u Hz\n", + mmc_hostname(host), __func__, host->f_init); +#endif + mmc_power_up(host, host->ocr_avail); + + /* + * Some eMMCs (with VCCQ always on) may not be reset after power up, so + * do a hardware reset if possible. + */ + mmc_hw_reset_for_init(host); + + /* + * sdio_reset sends CMD52 to reset card. Since we do not know + * if the card is being re-initialized, just send it. CMD52 + * should be ignored by SD/eMMC cards. + */ + sdio_reset(host); + mmc_go_idle(host); + + mmc_send_if_cond(host, host->ocr_avail); + + /* Order's important: probe SDIO, then SD, then MMC */ + if (!mmc_attach_sdio(host)) + return 0; + if (!mmc_attach_sd(host)) + return 0; + if (!mmc_attach_mmc(host)) + return 0; + + mmc_power_off(host); + return -EIO; +} + +int _mmc_detect_card_removed(struct mmc_host *host) +{ + int ret; + + if (host->caps & MMC_CAP_NONREMOVABLE) + return 0; + + if (!host->card || mmc_card_removed(host->card)) + return 1; + + ret = host->bus_ops->alive(host); + + /* + * Card detect status and alive check may be out of sync if card is + * removed slowly, when card detect switch changes while card/slot + * pads are still contacted in hardware (refer to "SD Card Mechanical + * Addendum, Appendix C: Card Detection Switch"). So reschedule a + * detect work 200ms later for this case. + */ + if (!ret && host->ops->get_cd && !host->ops->get_cd(host)) { + mmc_detect_change(host, msecs_to_jiffies(200)); + pr_debug("%s: card removed too slowly\n", mmc_hostname(host)); + } + + if (ret) { + mmc_card_set_removed(host->card); + pr_debug("%s: card remove detected\n", mmc_hostname(host)); + } + + return ret; +} + +int mmc_detect_card_removed(struct mmc_host *host) +{ + struct mmc_card *card = host->card; + int ret; + + WARN_ON(!host->claimed); + + if (!card) + return 1; + + ret = mmc_card_removed(card); + /* + * The card will be considered unchanged unless we have been asked to + * detect a change or host requires polling to provide card detection. + */ + if (!host->detect_change && !(host->caps & MMC_CAP_NEEDS_POLL)) + return ret; + + host->detect_change = 0; + if (!ret) { + ret = _mmc_detect_card_removed(host); + if (ret && (host->caps & MMC_CAP_NEEDS_POLL)) { + /* + * Schedule a detect work as soon as possible to let a + * rescan handle the card removal. + */ + cancel_delayed_work(&host->detect); + _mmc_detect_change(host, 0, false); + } + } + + return ret; +} +EXPORT_SYMBOL(mmc_detect_card_removed); + void mmc_rescan(struct work_struct *work) { struct mmc_host *host = container_of(work, struct mmc_host, detect.work); - u32 ocr; - int err; - unsigned long flags; int i; - const unsigned freqs[] = { 400000, 300000, 200000, 100000 }; - - spin_lock_irqsave(&host->lock, flags); - if (host->rescan_disable) { - spin_unlock_irqrestore(&host->lock, flags); - return; + if (host->trigger_card_event && host->ops->card_event) { + host->ops->card_event(host); + host->trigger_card_event = false; } - spin_unlock_irqrestore(&host->lock, flags); + if (host->rescan_disable) + return; + /* If there is a non-removable card registered, only scan once */ + if ((host->caps & MMC_CAP_NONREMOVABLE) && host->rescan_entered) + return; + host->rescan_entered = 1; mmc_bus_get(host); - /* if there is a card registered, check whether it is still present */ - if ((host->bus_ops != NULL) && host->bus_ops->detect && !host->bus_dead) + /* + * if there is a _removable_ card registered, check whether it is + * still present + */ + if (host->bus_ops && !host->bus_dead + && !(host->caps & MMC_CAP_NONREMOVABLE)) host->bus_ops->detect(host); - mmc_bus_put(host); - + host->detect_change = 0; + /* + * Let mmc_bus_put() free the bus/bus_ops if we've found that + * the card is no longer present. + */ + mmc_bus_put(host); mmc_bus_get(host); /* if there still is a card present, stop here */ @@ -1461,91 +2456,44 @@ void mmc_rescan(struct work_struct *work) goto out; } - /* detect a newly inserted card */ - /* * Only we can add a new handler, so it's safe to * release the lock here. */ mmc_bus_put(host); - if (host->ops->get_cd && host->ops->get_cd(host) == 0) + if (!(host->caps & MMC_CAP_NONREMOVABLE) && host->ops->get_cd && + host->ops->get_cd(host) == 0) { + mmc_claim_host(host); + mmc_power_off(host); + mmc_release_host(host); goto out; + } + mmc_claim_host(host); for (i = 0; i < ARRAY_SIZE(freqs); i++) { - mmc_claim_host(host); - - if (freqs[i] >= host->f_min) - host->f_init = freqs[i]; - else if (!i || freqs[i-1] > host->f_min) - host->f_init = host->f_min; - else { - mmc_release_host(host); - goto out; - } -#ifdef CONFIG_MMC_DEBUG - pr_info("%s: %s: trying to init card at %u Hz\n", - mmc_hostname(host), __func__, host->f_init); -#endif - mmc_power_up(host); - sdio_reset(host); - mmc_go_idle(host); - - mmc_send_if_cond(host, host->ocr_avail); - - /* - * First we search for SDIO... - */ - err = mmc_send_io_op_cond(host, 0, &ocr); - if (!err) { - if (mmc_attach_sdio(host, ocr)) { - mmc_claim_host(host); - /* - * Try SDMEM (but not MMC) even if SDIO - * is broken. - */ - if (mmc_send_app_op_cond(host, 0, &ocr)) - goto out_fail; - - if (mmc_attach_sd(host, ocr)) - mmc_power_off(host); - } - goto out; - } - - /* - * ...then normal SD... - */ - err = mmc_send_app_op_cond(host, 0, &ocr); - if (!err) { - if (mmc_attach_sd(host, ocr)) - mmc_power_off(host); - goto out; - } - - /* - * ...and finally MMC. - */ - err = mmc_send_op_cond(host, 0, &ocr); - if (!err) { - if (mmc_attach_mmc(host, ocr)) - mmc_power_off(host); - goto out; - } - -out_fail: - mmc_release_host(host); - mmc_power_off(host); + if (!mmc_rescan_try_freq(host, max(freqs[i], host->f_min))) + break; + if (freqs[i] <= host->f_min) + break; } -out: + mmc_release_host(host); + + out: if (host->caps & MMC_CAP_NEEDS_POLL) mmc_schedule_delayed_work(&host->detect, HZ); } void mmc_start_host(struct mmc_host *host) { - mmc_power_off(host); - mmc_detect_change(host, 0); + host->f_init = max(freqs[0], host->f_min); + host->rescan_disable = 0; + if (host->caps2 & MMC_CAP2_NO_PRESCAN_POWERUP) + mmc_power_off(host); + else + mmc_power_up(host, host->ocr_avail); + mmc_gpiod_request_cd_irq(host); + _mmc_detect_change(host, 0, false); } void mmc_stop_host(struct mmc_host *host) @@ -1556,10 +2504,11 @@ void mmc_stop_host(struct mmc_host *host) host->removed = 1; spin_unlock_irqrestore(&host->lock, flags); #endif + if (host->slot.cd_irq >= 0) + disable_irq(host->slot.cd_irq); - if (host->caps & MMC_CAP_DISABLE) - cancel_delayed_work(&host->disable); - cancel_delayed_work(&host->detect); + host->rescan_disable = 1; + cancel_delayed_work_sync(&host->detect); mmc_flush_scheduled_work(); /* clear pm flags now and let card drivers set them as needed */ @@ -1567,11 +2516,11 @@ void mmc_stop_host(struct mmc_host *host) mmc_bus_get(host); if (host->bus_ops && !host->bus_dead) { - if (host->bus_ops->remove) - host->bus_ops->remove(host); - + /* Calling bus_ops->remove() with a claimed host can deadlock */ + host->bus_ops->remove(host); mmc_claim_host(host); mmc_detach_bus(host); + mmc_power_off(host); mmc_release_host(host); mmc_bus_put(host); return; @@ -1587,9 +2536,13 @@ int mmc_power_save_host(struct mmc_host *host) { int ret = 0; +#ifdef CONFIG_MMC_DEBUG + pr_info("%s: %s: powering down\n", mmc_hostname(host), __func__); +#endif + mmc_bus_get(host); - if (!host->bus_ops || host->bus_dead || !host->bus_ops->power_restore) { + if (!host->bus_ops || host->bus_dead) { mmc_bus_put(host); return -EINVAL; } @@ -1609,14 +2562,18 @@ int mmc_power_restore_host(struct mmc_host *host) { int ret; +#ifdef CONFIG_MMC_DEBUG + pr_info("%s: %s: powering up\n", mmc_hostname(host), __func__); +#endif + mmc_bus_get(host); - if (!host->bus_ops || host->bus_dead || !host->bus_ops->power_restore) { + if (!host->bus_ops || host->bus_dead) { mmc_bus_put(host); return -EINVAL; } - mmc_power_up(host); + mmc_power_up(host, host->card->ocr); ret = host->bus_ops->power_restore(host); mmc_bus_put(host); @@ -1625,117 +2582,28 @@ int mmc_power_restore_host(struct mmc_host *host) } EXPORT_SYMBOL(mmc_power_restore_host); -int mmc_card_awake(struct mmc_host *host) -{ - int err = -ENOSYS; - - mmc_bus_get(host); - - if (host->bus_ops && !host->bus_dead && host->bus_ops->awake) - err = host->bus_ops->awake(host); - - mmc_bus_put(host); - - return err; -} -EXPORT_SYMBOL(mmc_card_awake); - -int mmc_card_sleep(struct mmc_host *host) -{ - int err = -ENOSYS; - - mmc_bus_get(host); - - if (host->bus_ops && !host->bus_dead && host->bus_ops->awake) - err = host->bus_ops->sleep(host); - - mmc_bus_put(host); - - return err; -} -EXPORT_SYMBOL(mmc_card_sleep); - -int mmc_card_can_sleep(struct mmc_host *host) -{ - struct mmc_card *card = host->card; - - if (card && mmc_card_mmc(card) && card->ext_csd.rev >= 3) - return 1; - return 0; -} -EXPORT_SYMBOL(mmc_card_can_sleep); - -#ifdef CONFIG_PM - -/** - * mmc_suspend_host - suspend a host - * @host: mmc host +/* + * Flush the cache to the non-volatile storage. */ -int mmc_suspend_host(struct mmc_host *host) +int mmc_flush_cache(struct mmc_card *card) { int err = 0; - if (host->caps & MMC_CAP_DISABLE) - cancel_delayed_work(&host->disable); - cancel_delayed_work(&host->detect); - mmc_flush_scheduled_work(); - - mmc_bus_get(host); - if (host->bus_ops && !host->bus_dead) { - if (host->bus_ops->suspend) - err = host->bus_ops->suspend(host); - if (err == -ENOSYS || !host->bus_ops->resume) { - /* - * We simply "remove" the card in this case. - * It will be redetected on resume. - */ - if (host->bus_ops->remove) - host->bus_ops->remove(host); - mmc_claim_host(host); - mmc_detach_bus(host); - mmc_release_host(host); - host->pm_flags = 0; - err = 0; - } + if (mmc_card_mmc(card) && + (card->ext_csd.cache_size > 0) && + (card->ext_csd.cache_ctrl & 1)) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_FLUSH_CACHE, 1, 0); + if (err) + pr_err("%s: cache flush error %d\n", + mmc_hostname(card->host), err); } - mmc_bus_put(host); - - if (!err && !(host->pm_flags & MMC_PM_KEEP_POWER)) - mmc_power_off(host); return err; } +EXPORT_SYMBOL(mmc_flush_cache); -EXPORT_SYMBOL(mmc_suspend_host); - -/** - * mmc_resume_host - resume a previously suspended host - * @host: mmc host - */ -int mmc_resume_host(struct mmc_host *host) -{ - int err = 0; - - mmc_bus_get(host); - if (host->bus_ops && !host->bus_dead) { - if (!(host->pm_flags & MMC_PM_KEEP_POWER)) { - mmc_power_up(host); - mmc_select_voltage(host, host->ocr); - } - BUG_ON(!host->bus_ops->resume); - err = host->bus_ops->resume(host); - if (err) { - printk(KERN_WARNING "%s: error %d during resume " - "(card was removed?)\n", - mmc_hostname(host), err); - err = 0; - } - } - mmc_bus_put(host); - - return err; -} -EXPORT_SYMBOL(mmc_resume_host); +#ifdef CONFIG_PM /* Do the card removal on suspend if card is assumed removeable * Do that in pm notifier while userspace isn't yet frozen, so we will be able @@ -1747,37 +2615,42 @@ int mmc_pm_notify(struct notifier_block *notify_block, struct mmc_host *host = container_of( notify_block, struct mmc_host, pm_notify); unsigned long flags; - + int err = 0; switch (mode) { case PM_HIBERNATION_PREPARE: case PM_SUSPEND_PREPARE: - spin_lock_irqsave(&host->lock, flags); host->rescan_disable = 1; spin_unlock_irqrestore(&host->lock, flags); cancel_delayed_work_sync(&host->detect); - if (!host->bus_ops || host->bus_ops->suspend) + if (!host->bus_ops) break; - mmc_claim_host(host); - - if (host->bus_ops->remove) - host->bus_ops->remove(host); + /* Validate prerequisites for suspend */ + if (host->bus_ops->pre_suspend) + err = host->bus_ops->pre_suspend(host); + if (!err) + break; + /* Calling bus_ops->remove() with a claimed host can deadlock */ + host->bus_ops->remove(host); + mmc_claim_host(host); mmc_detach_bus(host); + mmc_power_off(host); mmc_release_host(host); host->pm_flags = 0; break; case PM_POST_SUSPEND: case PM_POST_HIBERNATION: + case PM_POST_RESTORE: spin_lock_irqsave(&host->lock, flags); host->rescan_disable = 0; spin_unlock_irqrestore(&host->lock, flags); - mmc_detect_change(host, 0); + _mmc_detect_change(host, 0, false); } @@ -1785,11 +2658,28 @@ int mmc_pm_notify(struct notifier_block *notify_block, } #endif +/** + * mmc_init_context_info() - init synchronization context + * @host: mmc host + * + * Init struct context_info needed to implement asynchronous + * request mechanism, used by mmc core, host driver and mmc requests + * supplier. + */ +void mmc_init_context_info(struct mmc_host *host) +{ + spin_lock_init(&host->context_info.lock); + host->context_info.is_new_req = false; + host->context_info.is_done_rcv = false; + host->context_info.is_waiting_last_req = false; + init_waitqueue_head(&host->context_info.wait); +} + static int __init mmc_init(void) { int ret; - workqueue = create_singlethread_workqueue("kmmcd"); + workqueue = alloc_ordered_workqueue("kmmcd", 0); if (!workqueue) return -ENOMEM; diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h index 77240cd11bc..443a584660f 100644 --- a/drivers/mmc/core/core.h +++ b/drivers/mmc/core/core.h @@ -16,14 +16,17 @@ #define MMC_CMD_RETRIES 3 struct mmc_bus_ops { - int (*awake)(struct mmc_host *); - int (*sleep)(struct mmc_host *); void (*remove)(struct mmc_host *); void (*detect)(struct mmc_host *); + int (*pre_suspend)(struct mmc_host *); int (*suspend)(struct mmc_host *); int (*resume)(struct mmc_host *); + int (*runtime_suspend)(struct mmc_host *); + int (*runtime_resume)(struct mmc_host *); int (*power_save)(struct mmc_host *); int (*power_restore)(struct mmc_host *); + int (*alive)(struct mmc_host *); + int (*shutdown)(struct mmc_host *); }; void mmc_attach_bus(struct mmc_host *host, const struct mmc_bus_ops *ops); @@ -33,12 +36,19 @@ void mmc_init_erase(struct mmc_card *card); void mmc_set_chip_select(struct mmc_host *host, int mode); void mmc_set_clock(struct mmc_host *host, unsigned int hz); +void mmc_gate_clock(struct mmc_host *host); +void mmc_ungate_clock(struct mmc_host *host); +void mmc_set_ungated(struct mmc_host *host); void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode); void mmc_set_bus_width(struct mmc_host *host, unsigned int width); -void mmc_set_bus_width_ddr(struct mmc_host *host, unsigned int width, - unsigned int ddr); u32 mmc_select_voltage(struct mmc_host *host, u32 ocr); +int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, u32 ocr); +int __mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage); void mmc_set_timing(struct mmc_host *host, unsigned int timing); +void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type); +void mmc_power_up(struct mmc_host *host, u32 ocr); +void mmc_power_off(struct mmc_host *host); +void mmc_power_cycle(struct mmc_host *host, u32 ocr); static inline void mmc_delay(unsigned int ms) { @@ -54,12 +64,14 @@ void mmc_rescan(struct work_struct *work); void mmc_start_host(struct mmc_host *host); void mmc_stop_host(struct mmc_host *host); -int mmc_attach_mmc(struct mmc_host *host, u32 ocr); -int mmc_attach_sd(struct mmc_host *host, u32 ocr); -int mmc_attach_sdio(struct mmc_host *host, u32 ocr); +int _mmc_detect_card_removed(struct mmc_host *host); + +int mmc_attach_mmc(struct mmc_host *host); +int mmc_attach_sd(struct mmc_host *host); +int mmc_attach_sdio(struct mmc_host *host); /* Module parameters */ -extern int use_spi_crc; +extern bool use_spi_crc; /* Debugfs information for hosts and cards */ void mmc_add_host_debugfs(struct mmc_host *host); @@ -68,5 +80,6 @@ void mmc_remove_host_debugfs(struct mmc_host *host); void mmc_add_card_debugfs(struct mmc_card *card); void mmc_remove_card_debugfs(struct mmc_card *card); +void mmc_init_context_info(struct mmc_host *host); #endif diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c index eed1405fd74..91eb1622324 100644 --- a/drivers/mmc/core/debugfs.c +++ b/drivers/mmc/core/debugfs.c @@ -7,11 +7,14 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/moduleparam.h> +#include <linux/export.h> #include <linux/debugfs.h> #include <linux/fs.h> #include <linux/seq_file.h> #include <linux/slab.h> #include <linux/stat.h> +#include <linux/fault-inject.h> #include <linux/mmc/card.h> #include <linux/mmc/host.h> @@ -19,6 +22,14 @@ #include "core.h" #include "mmc_ops.h" +#ifdef CONFIG_FAIL_MMC_REQUEST + +static DECLARE_FAULT_ATTR(fail_default_attr); +static char *fail_request; +module_param(fail_request, charp, 0); + +#endif /* CONFIG_FAIL_MMC_REQUEST */ + /* The debugfs functions are optimized away when CONFIG_DEBUG_FS isn't set. */ static int mmc_ios_show(struct seq_file *s, void *data) { @@ -46,6 +57,8 @@ static int mmc_ios_show(struct seq_file *s, void *data) const char *str; seq_printf(s, "clock:\t\t%u Hz\n", ios->clock); + if (host->actual_clock) + seq_printf(s, "actual clock:\t%u Hz\n", host->actual_clock); seq_printf(s, "vdd:\t\t%u ", ios->vdd); if ((1 << ios->vdd) & MMC_VDD_165_195) seq_printf(s, "(1.65 - 1.95 V)\n"); @@ -113,12 +126,46 @@ static int mmc_ios_show(struct seq_file *s, void *data) case MMC_TIMING_SD_HS: str = "sd high-speed"; break; + case MMC_TIMING_UHS_SDR50: + str = "sd uhs SDR50"; + break; + case MMC_TIMING_UHS_SDR104: + str = "sd uhs SDR104"; + break; + case MMC_TIMING_UHS_DDR50: + str = "sd uhs DDR50"; + break; + case MMC_TIMING_MMC_DDR52: + str = "mmc DDR52"; + break; + case MMC_TIMING_MMC_HS200: + str = "mmc HS200"; + break; + case MMC_TIMING_MMC_HS400: + str = "mmc HS400"; + break; default: str = "invalid"; break; } seq_printf(s, "timing spec:\t%u (%s)\n", ios->timing, str); + switch (ios->signal_voltage) { + case MMC_SIGNAL_VOLTAGE_330: + str = "3.30 V"; + break; + case MMC_SIGNAL_VOLTAGE_180: + str = "1.80 V"; + break; + case MMC_SIGNAL_VOLTAGE_120: + str = "1.20 V"; + break; + default: + str = "invalid"; + break; + } + seq_printf(s, "signal voltage:\t%u (%s)\n", ios->chip_select, str); + return 0; } @@ -183,6 +230,20 @@ void mmc_add_host_debugfs(struct mmc_host *host) &mmc_clock_fops)) goto err_node; +#ifdef CONFIG_MMC_CLKGATE + if (!debugfs_create_u32("clk_delay", (S_IRUSR | S_IWUSR), + root, &host->clk_delay)) + goto err_node; +#endif +#ifdef CONFIG_FAIL_MMC_REQUEST + if (fail_request) + setup_fault_attr(&fail_default_attr, fail_request); + host->fail_mmc_request = fail_default_attr; + if (IS_ERR(fault_create_debugfs_attr("fail_mmc_request", + root, + &host->fail_mmc_request))) + goto err_node; +#endif return; err_node: @@ -203,13 +264,13 @@ static int mmc_dbg_card_status_get(void *data, u64 *val) u32 status; int ret; - mmc_claim_host(card->host); + mmc_get_card(card); ret = mmc_send_status(data, &status); if (!ret) *val = status; - mmc_release_host(card->host); + mmc_put_card(card); return ret; } @@ -236,13 +297,13 @@ static int mmc_ext_csd_open(struct inode *inode, struct file *filp) goto out_free; } - mmc_claim_host(card->host); + mmc_get_card(card); err = mmc_send_ext_csd(card, ext_csd); - mmc_release_host(card->host); + mmc_put_card(card); if (err) goto out_free; - for (i = 511; i >= 0; i--) + for (i = 0; i < 512; i++) n += sprintf(buf + n, "%02x", ext_csd[i]); n += sprintf(buf + n, "\n"); BUG_ON(n != EXT_CSD_STR_LEN); diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index 10b8af27e03..95cceae9694 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -3,6 +3,7 @@ * * Copyright (C) 2003 Russell King, All Rights Reserved. * Copyright (C) 2007-2008 Pierre Ossman + * Copyright (C) 2010 Linus Walleij * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -14,12 +15,17 @@ #include <linux/device.h> #include <linux/err.h> #include <linux/idr.h> +#include <linux/of.h> +#include <linux/of_gpio.h> #include <linux/pagemap.h> +#include <linux/export.h> #include <linux/leds.h> #include <linux/slab.h> #include <linux/suspend.h> #include <linux/mmc/host.h> +#include <linux/mmc/card.h> +#include <linux/mmc/slot-gpio.h> #include "core.h" #include "host.h" @@ -29,6 +35,7 @@ static void mmc_host_classdev_release(struct device *dev) { struct mmc_host *host = cls_dev_to_mmc_host(dev); + mutex_destroy(&host->slot.lock); kfree(host); } @@ -50,6 +57,410 @@ void mmc_unregister_host_class(void) static DEFINE_IDR(mmc_host_idr); static DEFINE_SPINLOCK(mmc_host_lock); +#ifdef CONFIG_MMC_CLKGATE +static ssize_t clkgate_delay_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct mmc_host *host = cls_dev_to_mmc_host(dev); + return snprintf(buf, PAGE_SIZE, "%lu\n", host->clkgate_delay); +} + +static ssize_t clkgate_delay_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct mmc_host *host = cls_dev_to_mmc_host(dev); + unsigned long flags, value; + + if (kstrtoul(buf, 0, &value)) + return -EINVAL; + + spin_lock_irqsave(&host->clk_lock, flags); + host->clkgate_delay = value; + spin_unlock_irqrestore(&host->clk_lock, flags); + return count; +} + +/* + * Enabling clock gating will make the core call out to the host + * once up and once down when it performs a request or card operation + * intermingled in any fashion. The driver will see this through + * set_ios() operations with ios.clock field set to 0 to gate (disable) + * the block clock, and to the old frequency to enable it again. + */ +static void mmc_host_clk_gate_delayed(struct mmc_host *host) +{ + unsigned long tick_ns; + unsigned long freq = host->ios.clock; + unsigned long flags; + + if (!freq) { + pr_debug("%s: frequency set to 0 in disable function, " + "this means the clock is already disabled.\n", + mmc_hostname(host)); + return; + } + /* + * New requests may have appeared while we were scheduling, + * then there is no reason to delay the check before + * clk_disable(). + */ + spin_lock_irqsave(&host->clk_lock, flags); + + /* + * Delay n bus cycles (at least 8 from MMC spec) before attempting + * to disable the MCI block clock. The reference count may have + * gone up again after this delay due to rescheduling! + */ + if (!host->clk_requests) { + spin_unlock_irqrestore(&host->clk_lock, flags); + tick_ns = DIV_ROUND_UP(1000000000, freq); + ndelay(host->clk_delay * tick_ns); + } else { + /* New users appeared while waiting for this work */ + spin_unlock_irqrestore(&host->clk_lock, flags); + return; + } + mutex_lock(&host->clk_gate_mutex); + spin_lock_irqsave(&host->clk_lock, flags); + if (!host->clk_requests) { + spin_unlock_irqrestore(&host->clk_lock, flags); + /* This will set host->ios.clock to 0 */ + mmc_gate_clock(host); + spin_lock_irqsave(&host->clk_lock, flags); + pr_debug("%s: gated MCI clock\n", mmc_hostname(host)); + } + spin_unlock_irqrestore(&host->clk_lock, flags); + mutex_unlock(&host->clk_gate_mutex); +} + +/* + * Internal work. Work to disable the clock at some later point. + */ +static void mmc_host_clk_gate_work(struct work_struct *work) +{ + struct mmc_host *host = container_of(work, struct mmc_host, + clk_gate_work.work); + + mmc_host_clk_gate_delayed(host); +} + +/** + * mmc_host_clk_hold - ungate hardware MCI clocks + * @host: host to ungate. + * + * Makes sure the host ios.clock is restored to a non-zero value + * past this call. Increase clock reference count and ungate clock + * if we're the first user. + */ +void mmc_host_clk_hold(struct mmc_host *host) +{ + unsigned long flags; + + /* cancel any clock gating work scheduled by mmc_host_clk_release() */ + cancel_delayed_work_sync(&host->clk_gate_work); + mutex_lock(&host->clk_gate_mutex); + spin_lock_irqsave(&host->clk_lock, flags); + if (host->clk_gated) { + spin_unlock_irqrestore(&host->clk_lock, flags); + mmc_ungate_clock(host); + spin_lock_irqsave(&host->clk_lock, flags); + pr_debug("%s: ungated MCI clock\n", mmc_hostname(host)); + } + host->clk_requests++; + spin_unlock_irqrestore(&host->clk_lock, flags); + mutex_unlock(&host->clk_gate_mutex); +} + +/** + * mmc_host_may_gate_card - check if this card may be gated + * @card: card to check. + */ +static bool mmc_host_may_gate_card(struct mmc_card *card) +{ + /* If there is no card we may gate it */ + if (!card) + return true; + /* + * Don't gate SDIO cards! These need to be clocked at all times + * since they may be independent systems generating interrupts + * and other events. The clock requests counter from the core will + * go down to zero since the core does not need it, but we will not + * gate the clock, because there is somebody out there that may still + * be using it. + */ + return !(card->quirks & MMC_QUIRK_BROKEN_CLK_GATING); +} + +/** + * mmc_host_clk_release - gate off hardware MCI clocks + * @host: host to gate. + * + * Calls the host driver with ios.clock set to zero as often as possible + * in order to gate off hardware MCI clocks. Decrease clock reference + * count and schedule disabling of clock. + */ +void mmc_host_clk_release(struct mmc_host *host) +{ + unsigned long flags; + + spin_lock_irqsave(&host->clk_lock, flags); + host->clk_requests--; + if (mmc_host_may_gate_card(host->card) && + !host->clk_requests) + schedule_delayed_work(&host->clk_gate_work, + msecs_to_jiffies(host->clkgate_delay)); + spin_unlock_irqrestore(&host->clk_lock, flags); +} + +/** + * mmc_host_clk_rate - get current clock frequency setting + * @host: host to get the clock frequency for. + * + * Returns current clock frequency regardless of gating. + */ +unsigned int mmc_host_clk_rate(struct mmc_host *host) +{ + unsigned long freq; + unsigned long flags; + + spin_lock_irqsave(&host->clk_lock, flags); + if (host->clk_gated) + freq = host->clk_old; + else + freq = host->ios.clock; + spin_unlock_irqrestore(&host->clk_lock, flags); + return freq; +} + +/** + * mmc_host_clk_init - set up clock gating code + * @host: host with potential clock to control + */ +static inline void mmc_host_clk_init(struct mmc_host *host) +{ + host->clk_requests = 0; + /* Hold MCI clock for 8 cycles by default */ + host->clk_delay = 8; + /* + * Default clock gating delay is 0ms to avoid wasting power. + * This value can be tuned by writing into sysfs entry. + */ + host->clkgate_delay = 0; + host->clk_gated = false; + INIT_DELAYED_WORK(&host->clk_gate_work, mmc_host_clk_gate_work); + spin_lock_init(&host->clk_lock); + mutex_init(&host->clk_gate_mutex); +} + +/** + * mmc_host_clk_exit - shut down clock gating code + * @host: host with potential clock to control + */ +static inline void mmc_host_clk_exit(struct mmc_host *host) +{ + /* + * Wait for any outstanding gate and then make sure we're + * ungated before exiting. + */ + if (cancel_delayed_work_sync(&host->clk_gate_work)) + mmc_host_clk_gate_delayed(host); + if (host->clk_gated) + mmc_host_clk_hold(host); + /* There should be only one user now */ + WARN_ON(host->clk_requests > 1); +} + +static inline void mmc_host_clk_sysfs_init(struct mmc_host *host) +{ + host->clkgate_delay_attr.show = clkgate_delay_show; + host->clkgate_delay_attr.store = clkgate_delay_store; + sysfs_attr_init(&host->clkgate_delay_attr.attr); + host->clkgate_delay_attr.attr.name = "clkgate_delay"; + host->clkgate_delay_attr.attr.mode = S_IRUGO | S_IWUSR; + if (device_create_file(&host->class_dev, &host->clkgate_delay_attr)) + pr_err("%s: Failed to create clkgate_delay sysfs entry\n", + mmc_hostname(host)); +} +#else + +static inline void mmc_host_clk_init(struct mmc_host *host) +{ +} + +static inline void mmc_host_clk_exit(struct mmc_host *host) +{ +} + +static inline void mmc_host_clk_sysfs_init(struct mmc_host *host) +{ +} + +#endif + +/** + * mmc_of_parse() - parse host's device-tree node + * @host: host whose node should be parsed. + * + * To keep the rest of the MMC subsystem unaware of whether DT has been + * used to to instantiate and configure this host instance or not, we + * parse the properties and set respective generic mmc-host flags and + * parameters. + */ +int mmc_of_parse(struct mmc_host *host) +{ + struct device_node *np; + u32 bus_width; + bool explicit_inv_wp, gpio_inv_wp = false; + enum of_gpio_flags flags; + int len, ret, gpio; + + if (!host->parent || !host->parent->of_node) + return 0; + + np = host->parent->of_node; + + /* "bus-width" is translated to MMC_CAP_*_BIT_DATA flags */ + if (of_property_read_u32(np, "bus-width", &bus_width) < 0) { + dev_dbg(host->parent, + "\"bus-width\" property is missing, assuming 1 bit.\n"); + bus_width = 1; + } + + switch (bus_width) { + case 8: + host->caps |= MMC_CAP_8_BIT_DATA; + /* Hosts capable of 8-bit transfers can also do 4 bits */ + case 4: + host->caps |= MMC_CAP_4_BIT_DATA; + break; + case 1: + break; + default: + dev_err(host->parent, + "Invalid \"bus-width\" value %u!\n", bus_width); + return -EINVAL; + } + + /* f_max is obtained from the optional "max-frequency" property */ + of_property_read_u32(np, "max-frequency", &host->f_max); + + /* + * Configure CD and WP pins. They are both by default active low to + * match the SDHCI spec. If GPIOs are provided for CD and / or WP, the + * mmc-gpio helpers are used to attach, configure and use them. If + * polarity inversion is specified in DT, one of MMC_CAP2_CD_ACTIVE_HIGH + * and MMC_CAP2_RO_ACTIVE_HIGH capability-2 flags is set. If the + * "broken-cd" property is provided, the MMC_CAP_NEEDS_POLL capability + * is set. If the "non-removable" property is found, the + * MMC_CAP_NONREMOVABLE capability is set and no card-detection + * configuration is performed. + */ + + /* Parse Card Detection */ + if (of_find_property(np, "non-removable", &len)) { + host->caps |= MMC_CAP_NONREMOVABLE; + } else { + bool explicit_inv_cd, gpio_inv_cd = false; + + explicit_inv_cd = of_property_read_bool(np, "cd-inverted"); + + if (of_find_property(np, "broken-cd", &len)) + host->caps |= MMC_CAP_NEEDS_POLL; + + gpio = of_get_named_gpio_flags(np, "cd-gpios", 0, &flags); + if (gpio == -EPROBE_DEFER) + return gpio; + if (gpio_is_valid(gpio)) { + if (!(flags & OF_GPIO_ACTIVE_LOW)) + gpio_inv_cd = true; + + ret = mmc_gpio_request_cd(host, gpio, 0); + if (ret < 0) { + dev_err(host->parent, + "Failed to request CD GPIO #%d: %d!\n", + gpio, ret); + return ret; + } else { + dev_info(host->parent, "Got CD GPIO #%d.\n", + gpio); + } + } + + if (explicit_inv_cd ^ gpio_inv_cd) + host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH; + } + + /* Parse Write Protection */ + explicit_inv_wp = of_property_read_bool(np, "wp-inverted"); + + gpio = of_get_named_gpio_flags(np, "wp-gpios", 0, &flags); + if (gpio == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto out; + } + if (gpio_is_valid(gpio)) { + if (!(flags & OF_GPIO_ACTIVE_LOW)) + gpio_inv_wp = true; + + ret = mmc_gpio_request_ro(host, gpio); + if (ret < 0) { + dev_err(host->parent, + "Failed to request WP GPIO: %d!\n", ret); + goto out; + } else { + dev_info(host->parent, "Got WP GPIO #%d.\n", + gpio); + } + } + if (explicit_inv_wp ^ gpio_inv_wp) + host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; + + if (of_find_property(np, "cap-sd-highspeed", &len)) + host->caps |= MMC_CAP_SD_HIGHSPEED; + if (of_find_property(np, "cap-mmc-highspeed", &len)) + host->caps |= MMC_CAP_MMC_HIGHSPEED; + if (of_find_property(np, "sd-uhs-sdr12", &len)) + host->caps |= MMC_CAP_UHS_SDR12; + if (of_find_property(np, "sd-uhs-sdr25", &len)) + host->caps |= MMC_CAP_UHS_SDR25; + if (of_find_property(np, "sd-uhs-sdr50", &len)) + host->caps |= MMC_CAP_UHS_SDR50; + if (of_find_property(np, "sd-uhs-sdr104", &len)) + host->caps |= MMC_CAP_UHS_SDR104; + if (of_find_property(np, "sd-uhs-ddr50", &len)) + host->caps |= MMC_CAP_UHS_DDR50; + if (of_find_property(np, "cap-power-off-card", &len)) + host->caps |= MMC_CAP_POWER_OFF_CARD; + if (of_find_property(np, "cap-sdio-irq", &len)) + host->caps |= MMC_CAP_SDIO_IRQ; + if (of_find_property(np, "full-pwr-cycle", &len)) + host->caps2 |= MMC_CAP2_FULL_PWR_CYCLE; + if (of_find_property(np, "keep-power-in-suspend", &len)) + host->pm_caps |= MMC_PM_KEEP_POWER; + if (of_find_property(np, "enable-sdio-wakeup", &len)) + host->pm_caps |= MMC_PM_WAKE_SDIO_IRQ; + if (of_find_property(np, "mmc-ddr-1_8v", &len)) + host->caps |= MMC_CAP_1_8V_DDR; + if (of_find_property(np, "mmc-ddr-1_2v", &len)) + host->caps |= MMC_CAP_1_2V_DDR; + if (of_find_property(np, "mmc-hs200-1_8v", &len)) + host->caps2 |= MMC_CAP2_HS200_1_8V_SDR; + if (of_find_property(np, "mmc-hs200-1_2v", &len)) + host->caps2 |= MMC_CAP2_HS200_1_2V_SDR; + if (of_find_property(np, "mmc-hs400-1_8v", &len)) + host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR; + if (of_find_property(np, "mmc-hs400-1_2v", &len)) + host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR; + + return 0; + +out: + mmc_gpio_free_cd(host); + return ret; +} + +EXPORT_SYMBOL(mmc_of_parse); + /** * mmc_alloc_host - initialise the per-host structure. * @extra: sizeof private data structure @@ -62,17 +473,20 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) int err; struct mmc_host *host; - if (!idr_pre_get(&mmc_host_idr, GFP_KERNEL)) - return NULL; - host = kzalloc(sizeof(struct mmc_host) + extra, GFP_KERNEL); if (!host) return NULL; + /* scanning will be enabled when we're ready */ + host->rescan_disable = 1; + idr_preload(GFP_KERNEL); spin_lock(&mmc_host_lock); - err = idr_get_new(&mmc_host_idr, host, &host->index); + err = idr_alloc(&mmc_host_idr, host, 0, 0, GFP_NOWAIT); + if (err >= 0) + host->index = err; spin_unlock(&mmc_host_lock); - if (err) + idr_preload_end(); + if (err < 0) goto free; dev_set_name(&host->class_dev, "mmc%d", host->index); @@ -82,10 +496,14 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) host->class_dev.class = &mmc_host_class; device_initialize(&host->class_dev); + mmc_host_clk_init(host); + + mutex_init(&host->slot.lock); + host->slot.cd_irq = -EINVAL; + spin_lock_init(&host->lock); init_waitqueue_head(&host->wq); INIT_DELAYED_WORK(&host->detect, mmc_rescan); - INIT_DELAYED_WORK_DEFERRABLE(&host->disable, mmc_host_deeper_disable); #ifdef CONFIG_PM host->pm_notify.notifier_call = mmc_pm_notify; #endif @@ -125,15 +543,16 @@ int mmc_add_host(struct mmc_host *host) WARN_ON((host->caps & MMC_CAP_SDIO_IRQ) && !host->ops->enable_sdio_irq); - led_trigger_register_simple(dev_name(&host->class_dev), &host->led); - err = device_add(&host->class_dev); if (err) return err; + led_trigger_register_simple(dev_name(&host->class_dev), &host->led); + #ifdef CONFIG_DEBUG_FS mmc_add_host_debugfs(host); #endif + mmc_host_clk_sysfs_init(host); mmc_start_host(host); register_pm_notifier(&host->pm_notify); @@ -163,6 +582,8 @@ void mmc_remove_host(struct mmc_host *host) device_del(&host->class_dev); led_trigger_unregister_simple(host->led); + + mmc_host_clk_exit(host); } EXPORT_SYMBOL(mmc_remove_host); @@ -183,4 +604,3 @@ void mmc_free_host(struct mmc_host *host) } EXPORT_SYMBOL(mmc_free_host); - diff --git a/drivers/mmc/core/host.h b/drivers/mmc/core/host.h index 8c87e1109a3..f2ab9e57812 100644 --- a/drivers/mmc/core/host.h +++ b/drivers/mmc/core/host.h @@ -10,11 +10,10 @@ */ #ifndef _MMC_CORE_HOST_H #define _MMC_CORE_HOST_H +#include <linux/mmc/host.h> int mmc_register_host_class(void); void mmc_unregister_host_class(void); -void mmc_host_deeper_disable(struct work_struct *work); - #endif diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 995261f7fd7..793c6f7ddb0 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -12,6 +12,8 @@ #include <linux/err.h> #include <linux/slab.h> +#include <linux/stat.h> +#include <linux/pm_runtime.h> #include <linux/mmc/host.h> #include <linux/mmc/card.h> @@ -20,6 +22,7 @@ #include "core.h" #include "bus.h" #include "mmc_ops.h" +#include "sd_ops.h" static const unsigned int tran_exp[] = { 10000, 100000, 1000000, 10000000, @@ -94,13 +97,14 @@ static int mmc_decode_cid(struct mmc_card *card) card->cid.prod_name[3] = UNSTUFF_BITS(resp, 72, 8); card->cid.prod_name[4] = UNSTUFF_BITS(resp, 64, 8); card->cid.prod_name[5] = UNSTUFF_BITS(resp, 56, 8); + card->cid.prv = UNSTUFF_BITS(resp, 48, 8); card->cid.serial = UNSTUFF_BITS(resp, 16, 32); card->cid.month = UNSTUFF_BITS(resp, 12, 4); card->cid.year = UNSTUFF_BITS(resp, 8, 4) + 1997; break; default: - printk(KERN_ERR "%s: card has unknown MMCA version %d\n", + pr_err("%s: card has unknown MMCA version %d\n", mmc_hostname(card->host), card->csd.mmca_vsn); return -EINVAL; } @@ -134,7 +138,7 @@ static int mmc_decode_csd(struct mmc_card *card) */ csd->structure = UNSTUFF_BITS(resp, 126, 2); if (csd->structure == 0) { - printk(KERN_ERR "%s: unrecognised CSD structure version %d\n", + pr_err("%s: unrecognised CSD structure version %d\n", mmc_hostname(card->host), csd->structure); return -EINVAL; } @@ -173,14 +177,17 @@ static int mmc_decode_csd(struct mmc_card *card) } /* - * Read and decode extended CSD. + * Read extended CSD. */ -static int mmc_read_ext_csd(struct mmc_card *card) +static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd) { int err; u8 *ext_csd; BUG_ON(!card); + BUG_ON(!new_ext_csd); + + *new_ext_csd = NULL; if (card->csd.mmca_vsn < CSD_SPEC_VER_4) return 0; @@ -191,60 +198,144 @@ static int mmc_read_ext_csd(struct mmc_card *card) */ ext_csd = kmalloc(512, GFP_KERNEL); if (!ext_csd) { - printk(KERN_ERR "%s: could not allocate a buffer to " + pr_err("%s: could not allocate a buffer to " "receive the ext_csd.\n", mmc_hostname(card->host)); return -ENOMEM; } err = mmc_send_ext_csd(card, ext_csd); if (err) { + kfree(ext_csd); + *new_ext_csd = NULL; + /* If the host or the card can't do the switch, * fail more gracefully. */ if ((err != -EINVAL) && (err != -ENOSYS) && (err != -EFAULT)) - goto out; + return err; /* * High capacity cards should have this "magic" size * stored in their CSD. */ if (card->csd.capacity == (4096 * 512)) { - printk(KERN_ERR "%s: unable to read EXT_CSD " + pr_err("%s: unable to read EXT_CSD " "on a possible high capacity card. " "Card will be ignored.\n", mmc_hostname(card->host)); } else { - printk(KERN_WARNING "%s: unable to read " + pr_warning("%s: unable to read " "EXT_CSD, performance might " "suffer.\n", mmc_hostname(card->host)); err = 0; } + } else + *new_ext_csd = ext_csd; - goto out; + return err; +} + +static void mmc_select_card_type(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + u8 card_type = card->ext_csd.raw_card_type; + u32 caps = host->caps, caps2 = host->caps2; + unsigned int hs_max_dtr = 0, hs200_max_dtr = 0; + unsigned int avail_type = 0; + + if (caps & MMC_CAP_MMC_HIGHSPEED && + card_type & EXT_CSD_CARD_TYPE_HS_26) { + hs_max_dtr = MMC_HIGH_26_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS_26; + } + + if (caps & MMC_CAP_MMC_HIGHSPEED && + card_type & EXT_CSD_CARD_TYPE_HS_52) { + hs_max_dtr = MMC_HIGH_52_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS_52; + } + + if (caps & MMC_CAP_1_8V_DDR && + card_type & EXT_CSD_CARD_TYPE_DDR_1_8V) { + hs_max_dtr = MMC_HIGH_DDR_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_DDR_1_8V; + } + + if (caps & MMC_CAP_1_2V_DDR && + card_type & EXT_CSD_CARD_TYPE_DDR_1_2V) { + hs_max_dtr = MMC_HIGH_DDR_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_DDR_1_2V; + } + + if (caps2 & MMC_CAP2_HS200_1_8V_SDR && + card_type & EXT_CSD_CARD_TYPE_HS200_1_8V) { + hs200_max_dtr = MMC_HS200_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS200_1_8V; + } + + if (caps2 & MMC_CAP2_HS200_1_2V_SDR && + card_type & EXT_CSD_CARD_TYPE_HS200_1_2V) { + hs200_max_dtr = MMC_HS200_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS200_1_2V; + } + + if (caps2 & MMC_CAP2_HS400_1_8V && + card_type & EXT_CSD_CARD_TYPE_HS400_1_8V) { + hs200_max_dtr = MMC_HS200_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS400_1_8V; + } + + if (caps2 & MMC_CAP2_HS400_1_2V && + card_type & EXT_CSD_CARD_TYPE_HS400_1_2V) { + hs200_max_dtr = MMC_HS200_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS400_1_2V; } + card->ext_csd.hs_max_dtr = hs_max_dtr; + card->ext_csd.hs200_max_dtr = hs200_max_dtr; + card->mmc_avail_type = avail_type; +} + +/* + * Decode extended CSD. + */ +static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) +{ + int err = 0, idx; + unsigned int part_size; + u8 hc_erase_grp_sz = 0, hc_wp_grp_sz = 0; + + BUG_ON(!card); + + if (!ext_csd) + return 0; + /* Version is coded in the CSD_STRUCTURE byte in the EXT_CSD register */ + card->ext_csd.raw_ext_csd_structure = ext_csd[EXT_CSD_STRUCTURE]; if (card->csd.structure == 3) { - int ext_csd_struct = ext_csd[EXT_CSD_STRUCTURE]; - if (ext_csd_struct > 2) { - printk(KERN_ERR "%s: unrecognised EXT_CSD structure " + if (card->ext_csd.raw_ext_csd_structure > 2) { + pr_err("%s: unrecognised EXT_CSD structure " "version %d\n", mmc_hostname(card->host), - ext_csd_struct); + card->ext_csd.raw_ext_csd_structure); err = -EINVAL; goto out; } } card->ext_csd.rev = ext_csd[EXT_CSD_REV]; - if (card->ext_csd.rev > 5) { - printk(KERN_ERR "%s: unrecognised EXT_CSD revision %d\n", + if (card->ext_csd.rev > 7) { + pr_err("%s: unrecognised EXT_CSD revision %d\n", mmc_hostname(card->host), card->ext_csd.rev); err = -EINVAL; goto out; } + card->ext_csd.raw_sectors[0] = ext_csd[EXT_CSD_SEC_CNT + 0]; + card->ext_csd.raw_sectors[1] = ext_csd[EXT_CSD_SEC_CNT + 1]; + card->ext_csd.raw_sectors[2] = ext_csd[EXT_CSD_SEC_CNT + 2]; + card->ext_csd.raw_sectors[3] = ext_csd[EXT_CSD_SEC_CNT + 3]; if (card->ext_csd.rev >= 2) { card->ext_csd.sectors = ext_csd[EXT_CSD_SEC_CNT + 0] << 0 | @@ -257,37 +348,20 @@ static int mmc_read_ext_csd(struct mmc_card *card) mmc_card_set_blockaddr(card); } - switch (ext_csd[EXT_CSD_CARD_TYPE] & EXT_CSD_CARD_TYPE_MASK) { - case EXT_CSD_CARD_TYPE_DDR_52 | EXT_CSD_CARD_TYPE_52 | - EXT_CSD_CARD_TYPE_26: - card->ext_csd.hs_max_dtr = 52000000; - card->ext_csd.card_type = EXT_CSD_CARD_TYPE_DDR_52; - break; - case EXT_CSD_CARD_TYPE_DDR_1_2V | EXT_CSD_CARD_TYPE_52 | - EXT_CSD_CARD_TYPE_26: - card->ext_csd.hs_max_dtr = 52000000; - card->ext_csd.card_type = EXT_CSD_CARD_TYPE_DDR_1_2V; - break; - case EXT_CSD_CARD_TYPE_DDR_1_8V | EXT_CSD_CARD_TYPE_52 | - EXT_CSD_CARD_TYPE_26: - card->ext_csd.hs_max_dtr = 52000000; - card->ext_csd.card_type = EXT_CSD_CARD_TYPE_DDR_1_8V; - break; - case EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26: - card->ext_csd.hs_max_dtr = 52000000; - break; - case EXT_CSD_CARD_TYPE_26: - card->ext_csd.hs_max_dtr = 26000000; - break; - default: - /* MMC v4 spec says this cannot happen */ - printk(KERN_WARNING "%s: card is mmc v4 but doesn't " - "support any high-speed modes.\n", - mmc_hostname(card->host)); - } + card->ext_csd.raw_card_type = ext_csd[EXT_CSD_CARD_TYPE]; + mmc_select_card_type(card); + card->ext_csd.raw_s_a_timeout = ext_csd[EXT_CSD_S_A_TIMEOUT]; + card->ext_csd.raw_erase_timeout_mult = + ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT]; + card->ext_csd.raw_hc_erase_grp_size = + ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]; if (card->ext_csd.rev >= 3) { u8 sa_shift = ext_csd[EXT_CSD_S_A_TIMEOUT]; + card->ext_csd.part_config = ext_csd[EXT_CSD_PART_CONFIG]; + + /* EXT_CSD value is in units of 10ms, but we store in ms */ + card->ext_csd.part_time = 10 * ext_csd[EXT_CSD_PART_SWITCH_TIME]; /* Sleep / awake timeout in 100ns units */ if (sa_shift > 0 && sa_shift <= 0x17) @@ -299,9 +373,110 @@ static int mmc_read_ext_csd(struct mmc_card *card) ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT]; card->ext_csd.hc_erase_size = ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] << 10; + + card->ext_csd.rel_sectors = ext_csd[EXT_CSD_REL_WR_SEC_C]; + + /* + * There are two boot regions of equal size, defined in + * multiples of 128K. + */ + if (ext_csd[EXT_CSD_BOOT_MULT] && mmc_boot_partition_access(card->host)) { + for (idx = 0; idx < MMC_NUM_BOOT_PARTITION; idx++) { + part_size = ext_csd[EXT_CSD_BOOT_MULT] << 17; + mmc_part_add(card, part_size, + EXT_CSD_PART_CONFIG_ACC_BOOT0 + idx, + "boot%d", idx, true, + MMC_BLK_DATA_AREA_BOOT); + } + } } + card->ext_csd.raw_hc_erase_gap_size = + ext_csd[EXT_CSD_HC_WP_GRP_SIZE]; + card->ext_csd.raw_sec_trim_mult = + ext_csd[EXT_CSD_SEC_TRIM_MULT]; + card->ext_csd.raw_sec_erase_mult = + ext_csd[EXT_CSD_SEC_ERASE_MULT]; + card->ext_csd.raw_sec_feature_support = + ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]; + card->ext_csd.raw_trim_mult = + ext_csd[EXT_CSD_TRIM_MULT]; + card->ext_csd.raw_partition_support = ext_csd[EXT_CSD_PARTITION_SUPPORT]; if (card->ext_csd.rev >= 4) { + /* + * Enhanced area feature support -- check whether the eMMC + * card has the Enhanced area enabled. If so, export enhanced + * area offset and size to user by adding sysfs interface. + */ + if ((ext_csd[EXT_CSD_PARTITION_SUPPORT] & 0x2) && + (ext_csd[EXT_CSD_PARTITION_ATTRIBUTE] & 0x1)) { + hc_erase_grp_sz = + ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]; + hc_wp_grp_sz = + ext_csd[EXT_CSD_HC_WP_GRP_SIZE]; + + card->ext_csd.enhanced_area_en = 1; + /* + * calculate the enhanced data area offset, in bytes + */ + card->ext_csd.enhanced_area_offset = + (ext_csd[139] << 24) + (ext_csd[138] << 16) + + (ext_csd[137] << 8) + ext_csd[136]; + if (mmc_card_blockaddr(card)) + card->ext_csd.enhanced_area_offset <<= 9; + /* + * calculate the enhanced data area size, in kilobytes + */ + card->ext_csd.enhanced_area_size = + (ext_csd[142] << 16) + (ext_csd[141] << 8) + + ext_csd[140]; + card->ext_csd.enhanced_area_size *= + (size_t)(hc_erase_grp_sz * hc_wp_grp_sz); + card->ext_csd.enhanced_area_size <<= 9; + } else { + /* + * If the enhanced area is not enabled, disable these + * device attributes. + */ + card->ext_csd.enhanced_area_offset = -EINVAL; + card->ext_csd.enhanced_area_size = -EINVAL; + } + + /* + * General purpose partition feature support -- + * If ext_csd has the size of general purpose partitions, + * set size, part_cfg, partition name in mmc_part. + */ + if (ext_csd[EXT_CSD_PARTITION_SUPPORT] & + EXT_CSD_PART_SUPPORT_PART_EN) { + if (card->ext_csd.enhanced_area_en != 1) { + hc_erase_grp_sz = + ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]; + hc_wp_grp_sz = + ext_csd[EXT_CSD_HC_WP_GRP_SIZE]; + + card->ext_csd.enhanced_area_en = 1; + } + + for (idx = 0; idx < MMC_NUM_GP_PARTITION; idx++) { + if (!ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3] && + !ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 1] && + !ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 2]) + continue; + part_size = + (ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 2] + << 16) + + (ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 1] + << 8) + + ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3]; + part_size *= (size_t)(hc_erase_grp_sz * + hc_wp_grp_sz); + mmc_part_add(card, part_size << 19, + EXT_CSD_PART_CONFIG_ACC_GP0 + idx, + "gp%d", idx, false, + MMC_BLK_DATA_AREA_GP); + } + } card->ext_csd.sec_trim_mult = ext_csd[EXT_CSD_SEC_TRIM_MULT]; card->ext_csd.sec_erase_mult = @@ -310,16 +485,209 @@ static int mmc_read_ext_csd(struct mmc_card *card) ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]; card->ext_csd.trim_timeout = 300 * ext_csd[EXT_CSD_TRIM_MULT]; + + /* + * Note that the call to mmc_part_add above defaults to read + * only. If this default assumption is changed, the call must + * take into account the value of boot_locked below. + */ + card->ext_csd.boot_ro_lock = ext_csd[EXT_CSD_BOOT_WP]; + card->ext_csd.boot_ro_lockable = true; + + /* Save power class values */ + card->ext_csd.raw_pwr_cl_52_195 = + ext_csd[EXT_CSD_PWR_CL_52_195]; + card->ext_csd.raw_pwr_cl_26_195 = + ext_csd[EXT_CSD_PWR_CL_26_195]; + card->ext_csd.raw_pwr_cl_52_360 = + ext_csd[EXT_CSD_PWR_CL_52_360]; + card->ext_csd.raw_pwr_cl_26_360 = + ext_csd[EXT_CSD_PWR_CL_26_360]; + card->ext_csd.raw_pwr_cl_200_195 = + ext_csd[EXT_CSD_PWR_CL_200_195]; + card->ext_csd.raw_pwr_cl_200_360 = + ext_csd[EXT_CSD_PWR_CL_200_360]; + card->ext_csd.raw_pwr_cl_ddr_52_195 = + ext_csd[EXT_CSD_PWR_CL_DDR_52_195]; + card->ext_csd.raw_pwr_cl_ddr_52_360 = + ext_csd[EXT_CSD_PWR_CL_DDR_52_360]; + card->ext_csd.raw_pwr_cl_ddr_200_360 = + ext_csd[EXT_CSD_PWR_CL_DDR_200_360]; + } + + if (card->ext_csd.rev >= 5) { + /* Adjust production date as per JEDEC JESD84-B451 */ + if (card->cid.year < 2010) + card->cid.year += 16; + + /* check whether the eMMC card supports BKOPS */ + if (ext_csd[EXT_CSD_BKOPS_SUPPORT] & 0x1) { + card->ext_csd.bkops = 1; + card->ext_csd.bkops_en = ext_csd[EXT_CSD_BKOPS_EN]; + card->ext_csd.raw_bkops_status = + ext_csd[EXT_CSD_BKOPS_STATUS]; + if (!card->ext_csd.bkops_en) + pr_info("%s: BKOPS_EN bit is not set\n", + mmc_hostname(card->host)); + } + + /* check whether the eMMC card supports HPI */ + if (ext_csd[EXT_CSD_HPI_FEATURES] & 0x1) { + card->ext_csd.hpi = 1; + if (ext_csd[EXT_CSD_HPI_FEATURES] & 0x2) + card->ext_csd.hpi_cmd = MMC_STOP_TRANSMISSION; + else + card->ext_csd.hpi_cmd = MMC_SEND_STATUS; + /* + * Indicate the maximum timeout to close + * a command interrupted by HPI + */ + card->ext_csd.out_of_int_time = + ext_csd[EXT_CSD_OUT_OF_INTERRUPT_TIME] * 10; + } + + card->ext_csd.rel_param = ext_csd[EXT_CSD_WR_REL_PARAM]; + card->ext_csd.rst_n_function = ext_csd[EXT_CSD_RST_N_FUNCTION]; + + /* + * RPMB regions are defined in multiples of 128K. + */ + card->ext_csd.raw_rpmb_size_mult = ext_csd[EXT_CSD_RPMB_MULT]; + if (ext_csd[EXT_CSD_RPMB_MULT] && mmc_host_cmd23(card->host)) { + mmc_part_add(card, ext_csd[EXT_CSD_RPMB_MULT] << 17, + EXT_CSD_PART_CONFIG_ACC_RPMB, + "rpmb", 0, false, + MMC_BLK_DATA_AREA_RPMB); + } } + card->ext_csd.raw_erased_mem_count = ext_csd[EXT_CSD_ERASED_MEM_CONT]; if (ext_csd[EXT_CSD_ERASED_MEM_CONT]) card->erased_byte = 0xFF; else card->erased_byte = 0x0; + /* eMMC v4.5 or later */ + if (card->ext_csd.rev >= 6) { + card->ext_csd.feature_support |= MMC_DISCARD_FEATURE; + + card->ext_csd.generic_cmd6_time = 10 * + ext_csd[EXT_CSD_GENERIC_CMD6_TIME]; + card->ext_csd.power_off_longtime = 10 * + ext_csd[EXT_CSD_POWER_OFF_LONG_TIME]; + + card->ext_csd.cache_size = + ext_csd[EXT_CSD_CACHE_SIZE + 0] << 0 | + ext_csd[EXT_CSD_CACHE_SIZE + 1] << 8 | + ext_csd[EXT_CSD_CACHE_SIZE + 2] << 16 | + ext_csd[EXT_CSD_CACHE_SIZE + 3] << 24; + + if (ext_csd[EXT_CSD_DATA_SECTOR_SIZE] == 1) + card->ext_csd.data_sector_size = 4096; + else + card->ext_csd.data_sector_size = 512; + + if ((ext_csd[EXT_CSD_DATA_TAG_SUPPORT] & 1) && + (ext_csd[EXT_CSD_TAG_UNIT_SIZE] <= 8)) { + card->ext_csd.data_tag_unit_size = + ((unsigned int) 1 << ext_csd[EXT_CSD_TAG_UNIT_SIZE]) * + (card->ext_csd.data_sector_size); + } else { + card->ext_csd.data_tag_unit_size = 0; + } + + card->ext_csd.max_packed_writes = + ext_csd[EXT_CSD_MAX_PACKED_WRITES]; + card->ext_csd.max_packed_reads = + ext_csd[EXT_CSD_MAX_PACKED_READS]; + } else { + card->ext_csd.data_sector_size = 512; + } + out: + return err; +} + +static inline void mmc_free_ext_csd(u8 *ext_csd) +{ kfree(ext_csd); +} + +static int mmc_compare_ext_csds(struct mmc_card *card, unsigned bus_width) +{ + u8 *bw_ext_csd; + int err; + + if (bus_width == MMC_BUS_WIDTH_1) + return 0; + + err = mmc_get_ext_csd(card, &bw_ext_csd); + + if (err || bw_ext_csd == NULL) { + err = -EINVAL; + goto out; + } + + /* only compare read only fields */ + err = !((card->ext_csd.raw_partition_support == + bw_ext_csd[EXT_CSD_PARTITION_SUPPORT]) && + (card->ext_csd.raw_erased_mem_count == + bw_ext_csd[EXT_CSD_ERASED_MEM_CONT]) && + (card->ext_csd.rev == + bw_ext_csd[EXT_CSD_REV]) && + (card->ext_csd.raw_ext_csd_structure == + bw_ext_csd[EXT_CSD_STRUCTURE]) && + (card->ext_csd.raw_card_type == + bw_ext_csd[EXT_CSD_CARD_TYPE]) && + (card->ext_csd.raw_s_a_timeout == + bw_ext_csd[EXT_CSD_S_A_TIMEOUT]) && + (card->ext_csd.raw_hc_erase_gap_size == + bw_ext_csd[EXT_CSD_HC_WP_GRP_SIZE]) && + (card->ext_csd.raw_erase_timeout_mult == + bw_ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT]) && + (card->ext_csd.raw_hc_erase_grp_size == + bw_ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]) && + (card->ext_csd.raw_sec_trim_mult == + bw_ext_csd[EXT_CSD_SEC_TRIM_MULT]) && + (card->ext_csd.raw_sec_erase_mult == + bw_ext_csd[EXT_CSD_SEC_ERASE_MULT]) && + (card->ext_csd.raw_sec_feature_support == + bw_ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]) && + (card->ext_csd.raw_trim_mult == + bw_ext_csd[EXT_CSD_TRIM_MULT]) && + (card->ext_csd.raw_sectors[0] == + bw_ext_csd[EXT_CSD_SEC_CNT + 0]) && + (card->ext_csd.raw_sectors[1] == + bw_ext_csd[EXT_CSD_SEC_CNT + 1]) && + (card->ext_csd.raw_sectors[2] == + bw_ext_csd[EXT_CSD_SEC_CNT + 2]) && + (card->ext_csd.raw_sectors[3] == + bw_ext_csd[EXT_CSD_SEC_CNT + 3]) && + (card->ext_csd.raw_pwr_cl_52_195 == + bw_ext_csd[EXT_CSD_PWR_CL_52_195]) && + (card->ext_csd.raw_pwr_cl_26_195 == + bw_ext_csd[EXT_CSD_PWR_CL_26_195]) && + (card->ext_csd.raw_pwr_cl_52_360 == + bw_ext_csd[EXT_CSD_PWR_CL_52_360]) && + (card->ext_csd.raw_pwr_cl_26_360 == + bw_ext_csd[EXT_CSD_PWR_CL_26_360]) && + (card->ext_csd.raw_pwr_cl_200_195 == + bw_ext_csd[EXT_CSD_PWR_CL_200_195]) && + (card->ext_csd.raw_pwr_cl_200_360 == + bw_ext_csd[EXT_CSD_PWR_CL_200_360]) && + (card->ext_csd.raw_pwr_cl_ddr_52_195 == + bw_ext_csd[EXT_CSD_PWR_CL_DDR_52_195]) && + (card->ext_csd.raw_pwr_cl_ddr_52_360 == + bw_ext_csd[EXT_CSD_PWR_CL_DDR_52_360]) && + (card->ext_csd.raw_pwr_cl_ddr_200_360 == + bw_ext_csd[EXT_CSD_PWR_CL_DDR_200_360])); + + if (err) + err = -EINVAL; + +out: + mmc_free_ext_csd(bw_ext_csd); return err; } @@ -335,7 +703,13 @@ MMC_DEV_ATTR(hwrev, "0x%x\n", card->cid.hwrev); MMC_DEV_ATTR(manfid, "0x%06x\n", card->cid.manfid); MMC_DEV_ATTR(name, "%s\n", card->cid.prod_name); MMC_DEV_ATTR(oemid, "0x%04x\n", card->cid.oemid); +MMC_DEV_ATTR(prv, "0x%x\n", card->cid.prv); MMC_DEV_ATTR(serial, "0x%08x\n", card->cid.serial); +MMC_DEV_ATTR(enhanced_area_offset, "%llu\n", + card->ext_csd.enhanced_area_offset); +MMC_DEV_ATTR(enhanced_area_size, "%u\n", card->ext_csd.enhanced_area_size); +MMC_DEV_ATTR(raw_rpmb_size_mult, "%#x\n", card->ext_csd.raw_rpmb_size_mult); +MMC_DEV_ATTR(rel_sectors, "%#x\n", card->ext_csd.rel_sectors); static struct attribute *mmc_std_attrs[] = { &dev_attr_cid.attr, @@ -348,22 +722,450 @@ static struct attribute *mmc_std_attrs[] = { &dev_attr_manfid.attr, &dev_attr_name.attr, &dev_attr_oemid.attr, + &dev_attr_prv.attr, &dev_attr_serial.attr, + &dev_attr_enhanced_area_offset.attr, + &dev_attr_enhanced_area_size.attr, + &dev_attr_raw_rpmb_size_mult.attr, + &dev_attr_rel_sectors.attr, NULL, }; +ATTRIBUTE_GROUPS(mmc_std); -static struct attribute_group mmc_std_attr_group = { - .attrs = mmc_std_attrs, +static struct device_type mmc_type = { + .groups = mmc_std_groups, }; -static const struct attribute_group *mmc_attr_groups[] = { - &mmc_std_attr_group, - NULL, -}; +/* + * Select the PowerClass for the current bus width + * If power class is defined for 4/8 bit bus in the + * extended CSD register, select it by executing the + * mmc_switch command. + */ +static int __mmc_select_powerclass(struct mmc_card *card, + unsigned int bus_width) +{ + struct mmc_host *host = card->host; + struct mmc_ext_csd *ext_csd = &card->ext_csd; + unsigned int pwrclass_val = 0; + int err = 0; -static struct device_type mmc_type = { - .groups = mmc_attr_groups, -}; + /* Power class selection is supported for versions >= 4.0 */ + if (card->csd.mmca_vsn < CSD_SPEC_VER_4) + return 0; + + /* Power class values are defined only for 4/8 bit bus */ + if (bus_width == EXT_CSD_BUS_WIDTH_1) + return 0; + + switch (1 << host->ios.vdd) { + case MMC_VDD_165_195: + if (host->ios.clock <= MMC_HIGH_26_MAX_DTR) + pwrclass_val = ext_csd->raw_pwr_cl_26_195; + else if (host->ios.clock <= MMC_HIGH_52_MAX_DTR) + pwrclass_val = (bus_width <= EXT_CSD_BUS_WIDTH_8) ? + ext_csd->raw_pwr_cl_52_195 : + ext_csd->raw_pwr_cl_ddr_52_195; + else if (host->ios.clock <= MMC_HS200_MAX_DTR) + pwrclass_val = ext_csd->raw_pwr_cl_200_195; + break; + case MMC_VDD_27_28: + case MMC_VDD_28_29: + case MMC_VDD_29_30: + case MMC_VDD_30_31: + case MMC_VDD_31_32: + case MMC_VDD_32_33: + case MMC_VDD_33_34: + case MMC_VDD_34_35: + case MMC_VDD_35_36: + if (host->ios.clock <= MMC_HIGH_26_MAX_DTR) + pwrclass_val = ext_csd->raw_pwr_cl_26_360; + else if (host->ios.clock <= MMC_HIGH_52_MAX_DTR) + pwrclass_val = (bus_width <= EXT_CSD_BUS_WIDTH_8) ? + ext_csd->raw_pwr_cl_52_360 : + ext_csd->raw_pwr_cl_ddr_52_360; + else if (host->ios.clock <= MMC_HS200_MAX_DTR) + pwrclass_val = (bus_width == EXT_CSD_DDR_BUS_WIDTH_8) ? + ext_csd->raw_pwr_cl_ddr_200_360 : + ext_csd->raw_pwr_cl_200_360; + break; + default: + pr_warning("%s: Voltage range not supported " + "for power class.\n", mmc_hostname(host)); + return -EINVAL; + } + + if (bus_width & (EXT_CSD_BUS_WIDTH_8 | EXT_CSD_DDR_BUS_WIDTH_8)) + pwrclass_val = (pwrclass_val & EXT_CSD_PWR_CL_8BIT_MASK) >> + EXT_CSD_PWR_CL_8BIT_SHIFT; + else + pwrclass_val = (pwrclass_val & EXT_CSD_PWR_CL_4BIT_MASK) >> + EXT_CSD_PWR_CL_4BIT_SHIFT; + + /* If the power class is different from the default value */ + if (pwrclass_val > 0) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_POWER_CLASS, + pwrclass_val, + card->ext_csd.generic_cmd6_time); + } + + return err; +} + +static int mmc_select_powerclass(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + u32 bus_width, ext_csd_bits; + int err, ddr; + + /* Power class selection is supported for versions >= 4.0 */ + if (card->csd.mmca_vsn < CSD_SPEC_VER_4) + return 0; + + bus_width = host->ios.bus_width; + /* Power class values are defined only for 4/8 bit bus */ + if (bus_width == MMC_BUS_WIDTH_1) + return 0; + + ddr = card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_52; + if (ddr) + ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ? + EXT_CSD_DDR_BUS_WIDTH_8 : EXT_CSD_DDR_BUS_WIDTH_4; + else + ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ? + EXT_CSD_BUS_WIDTH_8 : EXT_CSD_BUS_WIDTH_4; + + err = __mmc_select_powerclass(card, ext_csd_bits); + if (err) + pr_warn("%s: power class selection to bus width %d ddr %d failed\n", + mmc_hostname(host), 1 << bus_width, ddr); + + return err; +} + +/* + * Set the bus speed for the selected speed mode. + */ +static void mmc_set_bus_speed(struct mmc_card *card) +{ + unsigned int max_dtr = (unsigned int)-1; + + if ((mmc_card_hs200(card) || mmc_card_hs400(card)) && + max_dtr > card->ext_csd.hs200_max_dtr) + max_dtr = card->ext_csd.hs200_max_dtr; + else if (mmc_card_hs(card) && max_dtr > card->ext_csd.hs_max_dtr) + max_dtr = card->ext_csd.hs_max_dtr; + else if (max_dtr > card->csd.max_dtr) + max_dtr = card->csd.max_dtr; + + mmc_set_clock(card->host, max_dtr); +} + +/* + * Select the bus width amoung 4-bit and 8-bit(SDR). + * If the bus width is changed successfully, return the selected width value. + * Zero is returned instead of error value if the wide width is not supported. + */ +static int mmc_select_bus_width(struct mmc_card *card) +{ + static unsigned ext_csd_bits[] = { + EXT_CSD_BUS_WIDTH_8, + EXT_CSD_BUS_WIDTH_4, + }; + static unsigned bus_widths[] = { + MMC_BUS_WIDTH_8, + MMC_BUS_WIDTH_4, + }; + struct mmc_host *host = card->host; + unsigned idx, bus_width = 0; + int err = 0; + + if ((card->csd.mmca_vsn < CSD_SPEC_VER_4) && + !(host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) + return 0; + + idx = (host->caps & MMC_CAP_8_BIT_DATA) ? 0 : 1; + + /* + * Unlike SD, MMC cards dont have a configuration register to notify + * supported bus width. So bus test command should be run to identify + * the supported bus width or compare the ext csd values of current + * bus width and ext csd values of 1 bit mode read earlier. + */ + for (; idx < ARRAY_SIZE(bus_widths); idx++) { + /* + * Host is capable of 8bit transfer, then switch + * the device to work in 8bit transfer mode. If the + * mmc switch command returns error then switch to + * 4bit transfer mode. On success set the corresponding + * bus width on the host. + */ + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_BUS_WIDTH, + ext_csd_bits[idx], + card->ext_csd.generic_cmd6_time); + if (err) + continue; + + bus_width = bus_widths[idx]; + mmc_set_bus_width(host, bus_width); + + /* + * If controller can't handle bus width test, + * compare ext_csd previously read in 1 bit mode + * against ext_csd at new bus width + */ + if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST)) + err = mmc_compare_ext_csds(card, bus_width); + else + err = mmc_bus_test(card, bus_width); + + if (!err) { + err = bus_width; + break; + } else { + pr_warn("%s: switch to bus width %d failed\n", + mmc_hostname(host), ext_csd_bits[idx]); + } + } + + return err; +} + +/* + * Switch to the high-speed mode + */ +static int mmc_select_hs(struct mmc_card *card) +{ + int err; + + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HS_TIMING, EXT_CSD_TIMING_HS, + card->ext_csd.generic_cmd6_time, + true, true, true); + if (!err) + mmc_set_timing(card->host, MMC_TIMING_MMC_HS); + + return err; +} + +/* + * Activate wide bus and DDR if supported. + */ +static int mmc_select_hs_ddr(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + u32 bus_width, ext_csd_bits; + int err = 0; + + if (!(card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_52)) + return 0; + + bus_width = host->ios.bus_width; + if (bus_width == MMC_BUS_WIDTH_1) + return 0; + + ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ? + EXT_CSD_DDR_BUS_WIDTH_8 : EXT_CSD_DDR_BUS_WIDTH_4; + + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_BUS_WIDTH, + ext_csd_bits, + card->ext_csd.generic_cmd6_time); + if (err) { + pr_warn("%s: switch to bus width %d ddr failed\n", + mmc_hostname(host), 1 << bus_width); + return err; + } + + /* + * eMMC cards can support 3.3V to 1.2V i/o (vccq) + * signaling. + * + * EXT_CSD_CARD_TYPE_DDR_1_8V means 3.3V or 1.8V vccq. + * + * 1.8V vccq at 3.3V core voltage (vcc) is not required + * in the JEDEC spec for DDR. + * + * Do not force change in vccq since we are obviously + * working and no change to vccq is needed. + * + * WARNING: eMMC rules are NOT the same as SD DDR + */ + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_1_2V) { + err = __mmc_set_signal_voltage(host, + MMC_SIGNAL_VOLTAGE_120); + if (err) + return err; + } + + mmc_set_timing(host, MMC_TIMING_MMC_DDR52); + + return err; +} + +static int mmc_select_hs400(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + int err = 0; + + /* + * HS400 mode requires 8-bit bus width + */ + if (!(card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400 && + host->ios.bus_width == MMC_BUS_WIDTH_8)) + return 0; + + /* + * Before switching to dual data rate operation for HS400, + * it is required to convert from HS200 mode to HS mode. + */ + mmc_set_timing(card->host, MMC_TIMING_MMC_HS); + mmc_set_bus_speed(card); + + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HS_TIMING, EXT_CSD_TIMING_HS, + card->ext_csd.generic_cmd6_time, + true, true, true); + if (err) { + pr_warn("%s: switch to high-speed from hs200 failed, err:%d\n", + mmc_hostname(host), err); + return err; + } + + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_BUS_WIDTH, + EXT_CSD_DDR_BUS_WIDTH_8, + card->ext_csd.generic_cmd6_time); + if (err) { + pr_warn("%s: switch to bus width for hs400 failed, err:%d\n", + mmc_hostname(host), err); + return err; + } + + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HS_TIMING, EXT_CSD_TIMING_HS400, + card->ext_csd.generic_cmd6_time, + true, true, true); + if (err) { + pr_warn("%s: switch to hs400 failed, err:%d\n", + mmc_hostname(host), err); + return err; + } + + mmc_set_timing(host, MMC_TIMING_MMC_HS400); + mmc_set_bus_speed(card); + + return 0; +} + +/* + * For device supporting HS200 mode, the following sequence + * should be done before executing the tuning process. + * 1. set the desired bus width(4-bit or 8-bit, 1-bit is not supported) + * 2. switch to HS200 mode + * 3. set the clock to > 52Mhz and <=200MHz + */ +static int mmc_select_hs200(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + int err = -EINVAL; + + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_2V) + err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120); + + if (err && card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_8V) + err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180); + + /* If fails try again during next card power cycle */ + if (err) + goto err; + + /* + * Set the bus width(4 or 8) with host's support and + * switch to HS200 mode if bus width is set successfully. + */ + err = mmc_select_bus_width(card); + if (!IS_ERR_VALUE(err)) { + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HS_TIMING, EXT_CSD_TIMING_HS200, + card->ext_csd.generic_cmd6_time, + true, true, true); + if (!err) + mmc_set_timing(host, MMC_TIMING_MMC_HS200); + } +err: + return err; +} + +/* + * Activate High Speed or HS200 mode if supported. + */ +static int mmc_select_timing(struct mmc_card *card) +{ + int err = 0; + + if ((card->csd.mmca_vsn < CSD_SPEC_VER_4 && + card->ext_csd.hs_max_dtr == 0)) + goto bus_speed; + + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200) + err = mmc_select_hs200(card); + else if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS) + err = mmc_select_hs(card); + + if (err && err != -EBADMSG) + return err; + + if (err) { + pr_warn("%s: switch to %s failed\n", + mmc_card_hs(card) ? "high-speed" : + (mmc_card_hs200(card) ? "hs200" : ""), + mmc_hostname(card->host)); + err = 0; + } + +bus_speed: + /* + * Set the bus speed to the selected bus timing. + * If timing is not selected, backward compatible is the default. + */ + mmc_set_bus_speed(card); + return err; +} + +/* + * Execute tuning sequence to seek the proper bus operating + * conditions for HS200 and HS400, which sends CMD21 to the device. + */ +static int mmc_hs200_tuning(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + int err = 0; + + /* + * Timing should be adjusted to the HS400 target + * operation frequency for tuning process + */ + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400 && + host->ios.bus_width == MMC_BUS_WIDTH_8) + if (host->ops->prepare_hs400_tuning) + host->ops->prepare_hs400_tuning(host, &host->ios); + + if (host->ops->execute_tuning) { + mmc_host_clk_hold(host); + err = host->ops->execute_tuning(host, + MMC_SEND_TUNING_BLOCK_HS200); + mmc_host_clk_release(host); + + if (err) + pr_warn("%s: tuning execution failed\n", + mmc_hostname(host)); + } + + return err; +} /* * Handle the detection and initialisation of a card. @@ -375,23 +1177,29 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, struct mmc_card *oldcard) { struct mmc_card *card; - int err, ddr = MMC_SDR_MODE; + int err; u32 cid[4]; - unsigned int max_dtr; + u32 rocr; + u8 *ext_csd = NULL; BUG_ON(!host); WARN_ON(!host->claimed); + /* Set correct bus mode for MMC before attempting init */ + if (!mmc_host_is_spi(host)) + mmc_set_bus_mode(host, MMC_BUSMODE_OPENDRAIN); + /* * Since we're changing the OCR value, we seem to * need to tell some cards to go back to the idle * state. We wait 1ms to give cards time to * respond. + * mmc_go_idle is needed for eMMC that are asleep */ mmc_go_idle(host); /* The extra bit indicates that we support high capacity */ - err = mmc_send_op_cond(host, ocr | (1 << 30), NULL); + err = mmc_send_op_cond(host, ocr | (1 << 30), &rocr); if (err) goto err; @@ -431,6 +1239,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, goto err; } + card->ocr = ocr; card->type = MMC_TYPE_MMC; card->rca = 1; memcpy(card->raw_cid, cid, sizeof(card->raw_cid)); @@ -476,106 +1285,274 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, /* * Fetch and process extended CSD. */ - err = mmc_read_ext_csd(card); + + err = mmc_get_ext_csd(card, &ext_csd); + if (err) + goto free_card; + err = mmc_read_ext_csd(card, ext_csd); if (err) goto free_card; + + /* If doing byte addressing, check if required to do sector + * addressing. Handle the case of <2GB cards needing sector + * addressing. See section 8.1 JEDEC Standard JED84-A441; + * ocr register has bit 30 set for sector addressing. + */ + if (!(mmc_card_blockaddr(card)) && (rocr & (1<<30))) + mmc_card_set_blockaddr(card); + /* Erase size depends on CSD and Extended CSD */ mmc_set_erase_size(card); } /* - * Activate high speed (if supported) + * If enhanced_area_en is TRUE, host needs to enable ERASE_GRP_DEF + * bit. This bit will be lost every time after a reset or power off. */ - if ((card->ext_csd.hs_max_dtr != 0) && - (host->caps & MMC_CAP_MMC_HIGHSPEED)) { + if (card->ext_csd.enhanced_area_en || + (card->ext_csd.rev >= 3 && (host->caps2 & MMC_CAP2_HC_ERASE_SZ))) { err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_HS_TIMING, 1); + EXT_CSD_ERASE_GROUP_DEF, 1, + card->ext_csd.generic_cmd6_time); + if (err && err != -EBADMSG) goto free_card; if (err) { - printk(KERN_WARNING "%s: switch to highspeed failed\n", - mmc_hostname(card->host)); err = 0; + /* + * Just disable enhanced area off & sz + * will try to enable ERASE_GROUP_DEF + * during next time reinit + */ + card->ext_csd.enhanced_area_offset = -EINVAL; + card->ext_csd.enhanced_area_size = -EINVAL; } else { - mmc_card_set_highspeed(card); - mmc_set_timing(card->host, MMC_TIMING_MMC_HS); + card->ext_csd.erase_group_def = 1; + /* + * enable ERASE_GRP_DEF successfully. + * This will affect the erase size, so + * here need to reset erase size + */ + mmc_set_erase_size(card); } } /* - * Compute bus speed. + * Ensure eMMC user default partition is enabled */ - max_dtr = (unsigned int)-1; + if (card->ext_csd.part_config & EXT_CSD_PART_CONFIG_ACC_MASK) { + card->ext_csd.part_config &= ~EXT_CSD_PART_CONFIG_ACC_MASK; + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_PART_CONFIG, + card->ext_csd.part_config, + card->ext_csd.part_time); + if (err && err != -EBADMSG) + goto free_card; + } - if (mmc_card_highspeed(card)) { - if (max_dtr > card->ext_csd.hs_max_dtr) - max_dtr = card->ext_csd.hs_max_dtr; - } else if (max_dtr > card->csd.max_dtr) { - max_dtr = card->csd.max_dtr; + /* + * Enable power_off_notification byte in the ext_csd register + */ + if (card->ext_csd.rev >= 6) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_POWER_OFF_NOTIFICATION, + EXT_CSD_POWER_ON, + card->ext_csd.generic_cmd6_time); + if (err && err != -EBADMSG) + goto free_card; + + /* + * The err can be -EBADMSG or 0, + * so check for success and update the flag + */ + if (!err) + card->ext_csd.power_off_notification = EXT_CSD_POWER_ON; + } + + /* + * Select timing interface + */ + err = mmc_select_timing(card); + if (err) + goto free_card; + + if (mmc_card_hs200(card)) { + err = mmc_hs200_tuning(card); + if (err) + goto err; + + err = mmc_select_hs400(card); + if (err) + goto err; + } else if (mmc_card_hs(card)) { + /* Select the desired bus width optionally */ + err = mmc_select_bus_width(card); + if (!IS_ERR_VALUE(err)) { + err = mmc_select_hs_ddr(card); + if (err) + goto err; + } } - mmc_set_clock(host, max_dtr); + /* + * Choose the power class with selected bus interface + */ + mmc_select_powerclass(card); /* - * Indicate DDR mode (if supported). + * Enable HPI feature (if supported) */ - if (mmc_card_highspeed(card)) { - if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_8V) - && (host->caps & (MMC_CAP_1_8V_DDR))) - ddr = MMC_1_8V_DDR_MODE; - else if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_2V) - && (host->caps & (MMC_CAP_1_2V_DDR))) - ddr = MMC_1_2V_DDR_MODE; + if (card->ext_csd.hpi) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HPI_MGMT, 1, + card->ext_csd.generic_cmd6_time); + if (err && err != -EBADMSG) + goto free_card; + if (err) { + pr_warning("%s: Enabling HPI failed\n", + mmc_hostname(card->host)); + err = 0; + } else + card->ext_csd.hpi_en = 1; } /* - * Activate wide bus and DDR (if supported). + * If cache size is higher than 0, this indicates + * the existence of cache and it can be turned on. */ - if ((card->csd.mmca_vsn >= CSD_SPEC_VER_4) && - (host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) { - unsigned ext_csd_bit, bus_width; + if (card->ext_csd.cache_size > 0) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_CACHE_CTRL, 1, + card->ext_csd.generic_cmd6_time); + if (err && err != -EBADMSG) + goto free_card; - if (host->caps & MMC_CAP_8_BIT_DATA) { - if (ddr) - ext_csd_bit = EXT_CSD_DDR_BUS_WIDTH_8; - else - ext_csd_bit = EXT_CSD_BUS_WIDTH_8; - bus_width = MMC_BUS_WIDTH_8; + /* + * Only if no error, cache is turned on successfully. + */ + if (err) { + pr_warning("%s: Cache is supported, " + "but failed to turn on (%d)\n", + mmc_hostname(card->host), err); + card->ext_csd.cache_ctrl = 0; + err = 0; } else { - if (ddr) - ext_csd_bit = EXT_CSD_DDR_BUS_WIDTH_4; - else - ext_csd_bit = EXT_CSD_BUS_WIDTH_4; - bus_width = MMC_BUS_WIDTH_4; + card->ext_csd.cache_ctrl = 1; } + } + /* + * The mandatory minimum values are defined for packed command. + * read: 5, write: 3 + */ + if (card->ext_csd.max_packed_writes >= 3 && + card->ext_csd.max_packed_reads >= 5 && + host->caps2 & MMC_CAP2_PACKED_CMD) { err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_BUS_WIDTH, ext_csd_bit); - + EXT_CSD_EXP_EVENTS_CTRL, + EXT_CSD_PACKED_EVENT_EN, + card->ext_csd.generic_cmd6_time); if (err && err != -EBADMSG) goto free_card; - if (err) { - printk(KERN_WARNING "%s: switch to bus width %d ddr %d " - "failed\n", mmc_hostname(card->host), - 1 << bus_width, ddr); + pr_warn("%s: Enabling packed event failed\n", + mmc_hostname(card->host)); + card->ext_csd.packed_event_en = 0; err = 0; } else { - mmc_card_set_ddr_mode(card); - mmc_set_bus_width_ddr(card->host, bus_width, ddr); + card->ext_csd.packed_event_en = 1; } } if (!oldcard) host->card = card; + mmc_free_ext_csd(ext_csd); return 0; free_card: if (!oldcard) mmc_remove_card(card); err: + mmc_free_ext_csd(ext_csd); + + return err; +} + +static int mmc_can_sleep(struct mmc_card *card) +{ + return (card && card->ext_csd.rev >= 3); +} + +static int mmc_sleep(struct mmc_host *host) +{ + struct mmc_command cmd = {0}; + struct mmc_card *card = host->card; + unsigned int timeout_ms = DIV_ROUND_UP(card->ext_csd.sa_timeout, 10000); + int err; + + err = mmc_deselect_cards(host); + if (err) + return err; + + cmd.opcode = MMC_SLEEP_AWAKE; + cmd.arg = card->rca << 16; + cmd.arg |= 1 << 15; + + /* + * If the max_busy_timeout of the host is specified, validate it against + * the sleep cmd timeout. A failure means we need to prevent the host + * from doing hw busy detection, which is done by converting to a R1 + * response instead of a R1B. + */ + if (host->max_busy_timeout && (timeout_ms > host->max_busy_timeout)) { + cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; + } else { + cmd.flags = MMC_RSP_R1B | MMC_CMD_AC; + cmd.busy_timeout = timeout_ms; + } + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) + return err; + + /* + * If the host does not wait while the card signals busy, then we will + * will have to wait the sleep/awake timeout. Note, we cannot use the + * SEND_STATUS command to poll the status because that command (and most + * others) is invalid while the card sleeps. + */ + if (!cmd.busy_timeout || !(host->caps & MMC_CAP_WAIT_WHILE_BUSY)) + mmc_delay(timeout_ms); + + return err; +} + +static int mmc_can_poweroff_notify(const struct mmc_card *card) +{ + return card && + mmc_card_mmc(card) && + (card->ext_csd.power_off_notification == EXT_CSD_POWER_ON); +} + +static int mmc_poweroff_notify(struct mmc_card *card, unsigned int notify_type) +{ + unsigned int timeout = card->ext_csd.generic_cmd6_time; + int err; + + /* Use EXT_CSD_POWER_OFF_SHORT as default notification type. */ + if (notify_type == EXT_CSD_POWER_OFF_LONG) + timeout = card->ext_csd.power_off_longtime; + + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_POWER_OFF_NOTIFICATION, + notify_type, timeout, true, false, false); + if (err) + pr_err("%s: Power Off Notification timed out, %u\n", + mmc_hostname(card->host), timeout); + + /* Disable the power off notification after the switch operation. */ + card->ext_csd.power_off_notification = EXT_CSD_NO_POWER_NOTIFICATION; return err; } @@ -593,6 +1570,14 @@ static void mmc_remove(struct mmc_host *host) } /* + * Card detection - card is alive. + */ +static int mmc_alive(struct mmc_host *host) +{ + return mmc_send_status(host->card, NULL); +} + +/* * Card detection callback from host. */ static void mmc_detect(struct mmc_host *host) @@ -602,145 +1587,226 @@ static void mmc_detect(struct mmc_host *host) BUG_ON(!host); BUG_ON(!host->card); - mmc_claim_host(host); + mmc_get_card(host->card); /* * Just check if our card has been removed. */ - err = mmc_send_status(host->card, NULL); + err = _mmc_detect_card_removed(host); - mmc_release_host(host); + mmc_put_card(host->card); if (err) { mmc_remove(host); mmc_claim_host(host); mmc_detach_bus(host); + mmc_power_off(host); mmc_release_host(host); } } -/* - * Suspend callback from host. - */ -static int mmc_suspend(struct mmc_host *host) +static int _mmc_suspend(struct mmc_host *host, bool is_suspend) { + int err = 0; + unsigned int notify_type = is_suspend ? EXT_CSD_POWER_OFF_SHORT : + EXT_CSD_POWER_OFF_LONG; + BUG_ON(!host); BUG_ON(!host->card); mmc_claim_host(host); - if (!mmc_host_is_spi(host)) - mmc_deselect_cards(host); - host->card->state &= ~MMC_STATE_HIGHSPEED; + + if (mmc_card_suspended(host->card)) + goto out; + + if (mmc_card_doing_bkops(host->card)) { + err = mmc_stop_bkops(host->card); + if (err) + goto out; + } + + err = mmc_flush_cache(host->card); + if (err) + goto out; + + if (mmc_can_poweroff_notify(host->card) && + ((host->caps2 & MMC_CAP2_FULL_PWR_CYCLE) || !is_suspend)) + err = mmc_poweroff_notify(host->card, notify_type); + else if (mmc_can_sleep(host->card)) + err = mmc_sleep(host); + else if (!mmc_host_is_spi(host)) + err = mmc_deselect_cards(host); + + if (!err) { + mmc_power_off(host); + mmc_card_set_suspended(host->card); + } +out: mmc_release_host(host); + return err; +} - return 0; +/* + * Suspend callback + */ +static int mmc_suspend(struct mmc_host *host) +{ + int err; + + err = _mmc_suspend(host, true); + if (!err) { + pm_runtime_disable(&host->card->dev); + pm_runtime_set_suspended(&host->card->dev); + } + + return err; } /* - * Resume callback from host. - * * This function tries to determine if the same card is still present * and, if so, restore all state to it. */ -static int mmc_resume(struct mmc_host *host) +static int _mmc_resume(struct mmc_host *host) { - int err; + int err = 0; BUG_ON(!host); BUG_ON(!host->card); mmc_claim_host(host); - err = mmc_init_card(host, host->ocr, host->card); - mmc_release_host(host); + if (!mmc_card_suspended(host->card)) + goto out; + + mmc_power_up(host, host->card->ocr); + err = mmc_init_card(host, host->card->ocr, host->card); + mmc_card_clr_suspended(host->card); + +out: + mmc_release_host(host); return err; } -static int mmc_power_restore(struct mmc_host *host) +/* + * Shutdown callback + */ +static int mmc_shutdown(struct mmc_host *host) { - int ret; + int err = 0; - host->card->state &= ~MMC_STATE_HIGHSPEED; - mmc_claim_host(host); - ret = mmc_init_card(host, host->ocr, host->card); - mmc_release_host(host); + /* + * In a specific case for poweroff notify, we need to resume the card + * before we can shutdown it properly. + */ + if (mmc_can_poweroff_notify(host->card) && + !(host->caps2 & MMC_CAP2_FULL_PWR_CYCLE)) + err = _mmc_resume(host); - return ret; + if (!err) + err = _mmc_suspend(host, false); + + return err; } -static int mmc_sleep(struct mmc_host *host) +/* + * Callback for resume. + */ +static int mmc_resume(struct mmc_host *host) { - struct mmc_card *card = host->card; - int err = -ENOSYS; + int err = 0; - if (card && card->ext_csd.rev >= 3) { - err = mmc_card_sleepawake(host, 1); - if (err < 0) - pr_debug("%s: Error %d while putting card into sleep", - mmc_hostname(host), err); + if (!(host->caps & MMC_CAP_RUNTIME_RESUME)) { + err = _mmc_resume(host); + pm_runtime_set_active(&host->card->dev); + pm_runtime_mark_last_busy(&host->card->dev); } + pm_runtime_enable(&host->card->dev); return err; } -static int mmc_awake(struct mmc_host *host) +/* + * Callback for runtime_suspend. + */ +static int mmc_runtime_suspend(struct mmc_host *host) { - struct mmc_card *card = host->card; - int err = -ENOSYS; + int err; - if (card && card->ext_csd.rev >= 3) { - err = mmc_card_sleepawake(host, 0); - if (err < 0) - pr_debug("%s: Error %d while awaking sleeping card", - mmc_hostname(host), err); - } + if (!(host->caps & MMC_CAP_AGGRESSIVE_PM)) + return 0; + + err = _mmc_suspend(host, true); + if (err) + pr_err("%s: error %d doing aggessive suspend\n", + mmc_hostname(host), err); return err; } -static const struct mmc_bus_ops mmc_ops = { - .awake = mmc_awake, - .sleep = mmc_sleep, - .remove = mmc_remove, - .detect = mmc_detect, - .suspend = NULL, - .resume = NULL, - .power_restore = mmc_power_restore, -}; +/* + * Callback for runtime_resume. + */ +static int mmc_runtime_resume(struct mmc_host *host) +{ + int err; -static const struct mmc_bus_ops mmc_ops_unsafe = { - .awake = mmc_awake, - .sleep = mmc_sleep, + if (!(host->caps & (MMC_CAP_AGGRESSIVE_PM | MMC_CAP_RUNTIME_RESUME))) + return 0; + + err = _mmc_resume(host); + if (err) + pr_err("%s: error %d doing aggessive resume\n", + mmc_hostname(host), err); + + return 0; +} + +static int mmc_power_restore(struct mmc_host *host) +{ + int ret; + + mmc_claim_host(host); + ret = mmc_init_card(host, host->card->ocr, host->card); + mmc_release_host(host); + + return ret; +} + +static const struct mmc_bus_ops mmc_ops = { .remove = mmc_remove, .detect = mmc_detect, .suspend = mmc_suspend, .resume = mmc_resume, + .runtime_suspend = mmc_runtime_suspend, + .runtime_resume = mmc_runtime_resume, .power_restore = mmc_power_restore, + .alive = mmc_alive, + .shutdown = mmc_shutdown, }; -static void mmc_attach_bus_ops(struct mmc_host *host) -{ - const struct mmc_bus_ops *bus_ops; - - if (!mmc_card_is_removable(host)) - bus_ops = &mmc_ops_unsafe; - else - bus_ops = &mmc_ops; - mmc_attach_bus(host, bus_ops); -} - /* * Starting point for MMC card init. */ -int mmc_attach_mmc(struct mmc_host *host, u32 ocr) +int mmc_attach_mmc(struct mmc_host *host) { int err; + u32 ocr, rocr; BUG_ON(!host); WARN_ON(!host->claimed); - mmc_attach_bus_ops(host); + /* Set correct bus mode for MMC before attempting attach */ + if (!mmc_host_is_spi(host)) + mmc_set_bus_mode(host, MMC_BUSMODE_OPENDRAIN); + + err = mmc_send_op_cond(host, 0, &ocr); + if (err) + return err; + + mmc_attach_bus(host, &mmc_ops); + if (host->ocr_avail_mmc) + host->ocr_avail = host->ocr_avail_mmc; /* * We need to get OCR a different way for SPI. @@ -751,23 +1817,12 @@ int mmc_attach_mmc(struct mmc_host *host, u32 ocr) goto err; } - /* - * Sanity check the voltages that the card claims to - * support. - */ - if (ocr & 0x7F) { - printk(KERN_WARNING "%s: card claims to support voltages " - "below the defined range. These will be ignored.\n", - mmc_hostname(host)); - ocr &= ~0x7F; - } - - host->ocr = mmc_select_voltage(host, ocr); + rocr = mmc_select_voltage(host, ocr); /* * Can we support the voltage of the card? */ - if (!host->ocr) { + if (!rocr) { err = -EINVAL; goto err; } @@ -775,27 +1830,27 @@ int mmc_attach_mmc(struct mmc_host *host, u32 ocr) /* * Detect and init the card. */ - err = mmc_init_card(host, host->ocr, NULL); + err = mmc_init_card(host, rocr, NULL); if (err) goto err; mmc_release_host(host); - err = mmc_add_card(host->card); + mmc_claim_host(host); if (err) goto remove_card; return 0; remove_card: + mmc_release_host(host); mmc_remove_card(host->card); - host->card = NULL; mmc_claim_host(host); + host->card = NULL; err: mmc_detach_bus(host); - mmc_release_host(host); - printk(KERN_ERR "%s: error %d whilst initialising MMC card\n", + pr_err("%s: error %d whilst initialising MMC card\n", mmc_hostname(host), err); return err; diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c index 326447c9ede..f51b5ba3bbe 100644 --- a/drivers/mmc/core/mmc_ops.c +++ b/drivers/mmc/core/mmc_ops.c @@ -10,6 +10,7 @@ */ #include <linux/slab.h> +#include <linux/export.h> #include <linux/types.h> #include <linux/scatterlist.h> @@ -20,15 +21,49 @@ #include "core.h" #include "mmc_ops.h" +#define MMC_OPS_TIMEOUT_MS (10 * 60 * 1000) /* 10 minute timeout */ + +static inline int __mmc_send_status(struct mmc_card *card, u32 *status, + bool ignore_crc) +{ + int err; + struct mmc_command cmd = {0}; + + BUG_ON(!card); + BUG_ON(!card->host); + + cmd.opcode = MMC_SEND_STATUS; + if (!mmc_host_is_spi(card->host)) + cmd.arg = card->rca << 16; + cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC; + if (ignore_crc) + cmd.flags &= ~MMC_RSP_CRC; + + err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES); + if (err) + return err; + + /* NOTE: callers are required to understand the difference + * between "native" and SPI format status words! + */ + if (status) + *status = cmd.resp[0]; + + return 0; +} + +int mmc_send_status(struct mmc_card *card, u32 *status) +{ + return __mmc_send_status(card, status, false); +} + static int _mmc_select_card(struct mmc_host *host, struct mmc_card *card) { int err; - struct mmc_command cmd; + struct mmc_command cmd = {0}; BUG_ON(!host); - memset(&cmd, 0, sizeof(struct mmc_command)); - cmd.opcode = MMC_SELECT_CARD; if (card) { @@ -58,46 +93,10 @@ int mmc_deselect_cards(struct mmc_host *host) return _mmc_select_card(host, NULL); } -int mmc_card_sleepawake(struct mmc_host *host, int sleep) -{ - struct mmc_command cmd; - struct mmc_card *card = host->card; - int err; - - if (sleep) - mmc_deselect_cards(host); - - memset(&cmd, 0, sizeof(struct mmc_command)); - - cmd.opcode = MMC_SLEEP_AWAKE; - cmd.arg = card->rca << 16; - if (sleep) - cmd.arg |= 1 << 15; - - cmd.flags = MMC_RSP_R1B | MMC_CMD_AC; - err = mmc_wait_for_cmd(host, &cmd, 0); - if (err) - return err; - - /* - * If the host does not wait while the card signals busy, then we will - * will have to wait the sleep/awake timeout. Note, we cannot use the - * SEND_STATUS command to poll the status because that command (and most - * others) is invalid while the card sleeps. - */ - if (!(host->caps & MMC_CAP_WAIT_WHILE_BUSY)) - mmc_delay(DIV_ROUND_UP(card->ext_csd.sa_timeout, 10000)); - - if (!sleep) - err = mmc_select_card(card); - - return err; -} - int mmc_go_idle(struct mmc_host *host) { int err; - struct mmc_command cmd; + struct mmc_command cmd = {0}; /* * Non-SPI hosts need to prevent chipselect going active during @@ -105,7 +104,7 @@ int mmc_go_idle(struct mmc_host *host) * that in case of hardware that won't pull up DAT3/nCS otherwise. * * SPI hosts ignore ios.chip_select; it's managed according to - * rules that must accomodate non-MMC slaves which this layer + * rules that must accommodate non-MMC slaves which this layer * won't even know about. */ if (!mmc_host_is_spi(host)) { @@ -113,8 +112,6 @@ int mmc_go_idle(struct mmc_host *host) mmc_delay(1); } - memset(&cmd, 0, sizeof(struct mmc_command)); - cmd.opcode = MMC_GO_IDLE_STATE; cmd.arg = 0; cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_NONE | MMC_CMD_BC; @@ -135,13 +132,11 @@ int mmc_go_idle(struct mmc_host *host) int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr) { - struct mmc_command cmd; + struct mmc_command cmd = {0}; int i, err = 0; BUG_ON(!host); - memset(&cmd, 0, sizeof(struct mmc_command)); - cmd.opcode = MMC_SEND_OP_COND; cmd.arg = mmc_host_is_spi(host) ? 0 : ocr; cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R3 | MMC_CMD_BCR; @@ -178,13 +173,11 @@ int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr) int mmc_all_send_cid(struct mmc_host *host, u32 *cid) { int err; - struct mmc_command cmd; + struct mmc_command cmd = {0}; BUG_ON(!host); BUG_ON(!cid); - memset(&cmd, 0, sizeof(struct mmc_command)); - cmd.opcode = MMC_ALL_SEND_CID; cmd.arg = 0; cmd.flags = MMC_RSP_R2 | MMC_CMD_BCR; @@ -201,13 +194,11 @@ int mmc_all_send_cid(struct mmc_host *host, u32 *cid) int mmc_set_relative_addr(struct mmc_card *card) { int err; - struct mmc_command cmd; + struct mmc_command cmd = {0}; BUG_ON(!card); BUG_ON(!card->host); - memset(&cmd, 0, sizeof(struct mmc_command)); - cmd.opcode = MMC_SET_RELATIVE_ADDR; cmd.arg = card->rca << 16; cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; @@ -223,13 +214,11 @@ static int mmc_send_cxd_native(struct mmc_host *host, u32 arg, u32 *cxd, int opcode) { int err; - struct mmc_command cmd; + struct mmc_command cmd = {0}; BUG_ON(!host); BUG_ON(!cxd); - memset(&cmd, 0, sizeof(struct mmc_command)); - cmd.opcode = opcode; cmd.arg = arg; cmd.flags = MMC_RSP_R2 | MMC_CMD_AC; @@ -243,26 +232,32 @@ mmc_send_cxd_native(struct mmc_host *host, u32 arg, u32 *cxd, int opcode) return 0; } +/* + * NOTE: void *buf, caller for the buf is required to use DMA-capable + * buffer or on-stack buffer (with some overhead in callee). + */ static int mmc_send_cxd_data(struct mmc_card *card, struct mmc_host *host, u32 opcode, void *buf, unsigned len) { - struct mmc_request mrq; - struct mmc_command cmd; - struct mmc_data data; + struct mmc_request mrq = {NULL}; + struct mmc_command cmd = {0}; + struct mmc_data data = {0}; struct scatterlist sg; void *data_buf; + int is_on_stack; - /* dma onto stack is unsafe/nonportable, but callers to this - * routine normally provide temporary on-stack buffers ... - */ - data_buf = kmalloc(len, GFP_KERNEL); - if (data_buf == NULL) - return -ENOMEM; - - memset(&mrq, 0, sizeof(struct mmc_request)); - memset(&cmd, 0, sizeof(struct mmc_command)); - memset(&data, 0, sizeof(struct mmc_data)); + is_on_stack = object_is_on_stack(buf); + if (is_on_stack) { + /* + * dma onto stack is unsafe/nonportable, but callers to this + * routine normally provide temporary on-stack buffers ... + */ + data_buf = kmalloc(len, GFP_KERNEL); + if (!data_buf) + return -ENOMEM; + } else + data_buf = buf; mrq.cmd = &cmd; mrq.data = &data; @@ -297,8 +292,10 @@ mmc_send_cxd_data(struct mmc_card *card, struct mmc_host *host, mmc_wait_for_req(host, &mrq); - memcpy(buf, data_buf, len); - kfree(data_buf); + if (is_on_stack) { + memcpy(buf, data_buf, len); + kfree(data_buf); + } if (cmd.error) return cmd.error; @@ -311,24 +308,32 @@ mmc_send_cxd_data(struct mmc_card *card, struct mmc_host *host, int mmc_send_csd(struct mmc_card *card, u32 *csd) { int ret, i; + u32 *csd_tmp; if (!mmc_host_is_spi(card->host)) return mmc_send_cxd_native(card->host, card->rca << 16, csd, MMC_SEND_CSD); - ret = mmc_send_cxd_data(card, card->host, MMC_SEND_CSD, csd, 16); + csd_tmp = kmalloc(16, GFP_KERNEL); + if (!csd_tmp) + return -ENOMEM; + + ret = mmc_send_cxd_data(card, card->host, MMC_SEND_CSD, csd_tmp, 16); if (ret) - return ret; + goto err; for (i = 0;i < 4;i++) - csd[i] = be32_to_cpu(csd[i]); + csd[i] = be32_to_cpu(csd_tmp[i]); - return 0; +err: + kfree(csd_tmp); + return ret; } int mmc_send_cid(struct mmc_host *host, u32 *cid) { int ret, i; + u32 *cid_tmp; if (!mmc_host_is_spi(host)) { if (!host->card) @@ -337,14 +342,20 @@ int mmc_send_cid(struct mmc_host *host, u32 *cid) cid, MMC_SEND_CID); } - ret = mmc_send_cxd_data(NULL, host, MMC_SEND_CID, cid, 16); + cid_tmp = kmalloc(16, GFP_KERNEL); + if (!cid_tmp) + return -ENOMEM; + + ret = mmc_send_cxd_data(NULL, host, MMC_SEND_CID, cid_tmp, 16); if (ret) - return ret; + goto err; for (i = 0;i < 4;i++) - cid[i] = be32_to_cpu(cid[i]); + cid[i] = be32_to_cpu(cid_tmp[i]); - return 0; +err: + kfree(cid_tmp); + return ret; } int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd) @@ -352,14 +363,13 @@ int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd) return mmc_send_cxd_data(card, card->host, MMC_SEND_EXT_CSD, ext_csd, 512); } +EXPORT_SYMBOL_GPL(mmc_send_ext_csd); int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp) { - struct mmc_command cmd; + struct mmc_command cmd = {0}; int err; - memset(&cmd, 0, sizeof(struct mmc_command)); - cmd.opcode = MMC_SPI_READ_OCR; cmd.arg = highcap ? (1 << 30) : 0; cmd.flags = MMC_RSP_SPI_R3; @@ -372,11 +382,9 @@ int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp) int mmc_spi_set_crc(struct mmc_host *host, int use_crc) { - struct mmc_command cmd; + struct mmc_command cmd = {0}; int err; - memset(&cmd, 0, sizeof(struct mmc_command)); - cmd.opcode = MMC_SPI_CRC_ON_OFF; cmd.flags = MMC_RSP_SPI_R1; cmd.arg = use_crc; @@ -387,78 +395,263 @@ int mmc_spi_set_crc(struct mmc_host *host, int use_crc) return err; } -int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value) +/** + * __mmc_switch - modify EXT_CSD register + * @card: the MMC card associated with the data transfer + * @set: cmd set values + * @index: EXT_CSD register index + * @value: value to program into EXT_CSD register + * @timeout_ms: timeout (ms) for operation performed by register write, + * timeout of zero implies maximum possible timeout + * @use_busy_signal: use the busy signal as response type + * @send_status: send status cmd to poll for busy + * @ignore_crc: ignore CRC errors when sending status cmd to poll for busy + * + * Modifies the EXT_CSD register for selected card. + */ +int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, + unsigned int timeout_ms, bool use_busy_signal, bool send_status, + bool ignore_crc) { + struct mmc_host *host = card->host; int err; - struct mmc_command cmd; - u32 status; + struct mmc_command cmd = {0}; + unsigned long timeout; + u32 status = 0; + bool use_r1b_resp = use_busy_signal; - BUG_ON(!card); - BUG_ON(!card->host); - - memset(&cmd, 0, sizeof(struct mmc_command)); + /* + * If the cmd timeout and the max_busy_timeout of the host are both + * specified, let's validate them. A failure means we need to prevent + * the host from doing hw busy detection, which is done by converting + * to a R1 response instead of a R1B. + */ + if (timeout_ms && host->max_busy_timeout && + (timeout_ms > host->max_busy_timeout)) + use_r1b_resp = false; cmd.opcode = MMC_SWITCH; cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | (index << 16) | (value << 8) | set; - cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; + cmd.flags = MMC_CMD_AC; + if (use_r1b_resp) { + cmd.flags |= MMC_RSP_SPI_R1B | MMC_RSP_R1B; + /* + * A busy_timeout of zero means the host can decide to use + * whatever value it finds suitable. + */ + cmd.busy_timeout = timeout_ms; + } else { + cmd.flags |= MMC_RSP_SPI_R1 | MMC_RSP_R1; + } - err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES); + if (index == EXT_CSD_SANITIZE_START) + cmd.sanitize_busy = true; + + err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES); if (err) return err; - /* Must check status to be sure of no errors */ + /* No need to check card status in case of unblocking command */ + if (!use_busy_signal) + return 0; + + /* + * CRC errors shall only be ignored in cases were CMD13 is used to poll + * to detect busy completion. + */ + if ((host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp) + ignore_crc = false; + + /* We have an unspecified cmd timeout, use the fallback value. */ + if (!timeout_ms) + timeout_ms = MMC_OPS_TIMEOUT_MS; + + /* Must check status to be sure of no errors. */ + timeout = jiffies + msecs_to_jiffies(timeout_ms); do { - err = mmc_send_status(card, &status); - if (err) - return err; - if (card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) + if (send_status) { + err = __mmc_send_status(card, &status, ignore_crc); + if (err) + return err; + } + if ((host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp) break; - if (mmc_host_is_spi(card->host)) + if (mmc_host_is_spi(host)) break; - } while (R1_CURRENT_STATE(status) == 7); - if (mmc_host_is_spi(card->host)) { + /* + * We are not allowed to issue a status command and the host + * does'nt support MMC_CAP_WAIT_WHILE_BUSY, then we can only + * rely on waiting for the stated timeout to be sufficient. + */ + if (!send_status) { + mmc_delay(timeout_ms); + return 0; + } + + /* Timeout if the device never leaves the program state. */ + if (time_after(jiffies, timeout)) { + pr_err("%s: Card stuck in programming state! %s\n", + mmc_hostname(host), __func__); + return -ETIMEDOUT; + } + } while (R1_CURRENT_STATE(status) == R1_STATE_PRG); + + if (mmc_host_is_spi(host)) { if (status & R1_SPI_ILLEGAL_COMMAND) return -EBADMSG; } else { if (status & 0xFDFFA000) - printk(KERN_WARNING "%s: unexpected status %#x after " - "switch", mmc_hostname(card->host), status); + pr_warn("%s: unexpected status %#x after switch\n", + mmc_hostname(host), status); if (status & R1_SWITCH_ERROR) return -EBADMSG; } return 0; } +EXPORT_SYMBOL_GPL(__mmc_switch); -int mmc_send_status(struct mmc_card *card, u32 *status) +int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, + unsigned int timeout_ms) { - int err; - struct mmc_command cmd; + return __mmc_switch(card, set, index, value, timeout_ms, true, true, + false); +} +EXPORT_SYMBOL_GPL(mmc_switch); - BUG_ON(!card); - BUG_ON(!card->host); +static int +mmc_send_bus_test(struct mmc_card *card, struct mmc_host *host, u8 opcode, + u8 len) +{ + struct mmc_request mrq = {NULL}; + struct mmc_command cmd = {0}; + struct mmc_data data = {0}; + struct scatterlist sg; + u8 *data_buf; + u8 *test_buf; + int i, err; + static u8 testdata_8bit[8] = { 0x55, 0xaa, 0, 0, 0, 0, 0, 0 }; + static u8 testdata_4bit[4] = { 0x5a, 0, 0, 0 }; - memset(&cmd, 0, sizeof(struct mmc_command)); + /* dma onto stack is unsafe/nonportable, but callers to this + * routine normally provide temporary on-stack buffers ... + */ + data_buf = kmalloc(len, GFP_KERNEL); + if (!data_buf) + return -ENOMEM; - cmd.opcode = MMC_SEND_STATUS; - if (!mmc_host_is_spi(card->host)) - cmd.arg = card->rca << 16; - cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC; + if (len == 8) + test_buf = testdata_8bit; + else if (len == 4) + test_buf = testdata_4bit; + else { + pr_err("%s: Invalid bus_width %d\n", + mmc_hostname(host), len); + kfree(data_buf); + return -EINVAL; + } - err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES); - if (err) - return err; + if (opcode == MMC_BUS_TEST_W) + memcpy(data_buf, test_buf, len); - /* NOTE: callers are required to understand the difference - * between "native" and SPI format status words! + mrq.cmd = &cmd; + mrq.data = &data; + cmd.opcode = opcode; + cmd.arg = 0; + + /* NOTE HACK: the MMC_RSP_SPI_R1 is always correct here, but we + * rely on callers to never use this with "native" calls for reading + * CSD or CID. Native versions of those commands use the R2 type, + * not R1 plus a data block. */ + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; + + data.blksz = len; + data.blocks = 1; + if (opcode == MMC_BUS_TEST_R) + data.flags = MMC_DATA_READ; + else + data.flags = MMC_DATA_WRITE; + + data.sg = &sg; + data.sg_len = 1; + mmc_set_data_timeout(&data, card); + sg_init_one(&sg, data_buf, len); + mmc_wait_for_req(host, &mrq); + err = 0; + if (opcode == MMC_BUS_TEST_R) { + for (i = 0; i < len / 4; i++) + if ((test_buf[i] ^ data_buf[i]) != 0xff) { + err = -EIO; + break; + } + } + kfree(data_buf); + + if (cmd.error) + return cmd.error; + if (data.error) + return data.error; + + return err; +} + +int mmc_bus_test(struct mmc_card *card, u8 bus_width) +{ + int err, width; + + if (bus_width == MMC_BUS_WIDTH_8) + width = 8; + else if (bus_width == MMC_BUS_WIDTH_4) + width = 4; + else if (bus_width == MMC_BUS_WIDTH_1) + return 0; /* no need for test */ + else + return -EINVAL; + + /* + * Ignore errors from BUS_TEST_W. BUS_TEST_R will fail if there + * is a problem. This improves chances that the test will work. + */ + mmc_send_bus_test(card, card->host, MMC_BUS_TEST_W, width); + err = mmc_send_bus_test(card, card->host, MMC_BUS_TEST_R, width); + return err; +} + +int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status) +{ + struct mmc_command cmd = {0}; + unsigned int opcode; + int err; + + if (!card->ext_csd.hpi) { + pr_warning("%s: Card didn't support HPI command\n", + mmc_hostname(card->host)); + return -EINVAL; + } + + opcode = card->ext_csd.hpi_cmd; + if (opcode == MMC_STOP_TRANSMISSION) + cmd.flags = MMC_RSP_R1B | MMC_CMD_AC; + else if (opcode == MMC_SEND_STATUS) + cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; + + cmd.opcode = opcode; + cmd.arg = card->rca << 16 | 1; + + err = mmc_wait_for_cmd(card->host, &cmd, 0); + if (err) { + pr_warn("%s: error %d interrupting operation. " + "HPI command response %#x\n", mmc_hostname(card->host), + err, cmd.resp[0]); + return err; + } if (status) *status = cmd.resp[0]; return 0; } - diff --git a/drivers/mmc/core/mmc_ops.h b/drivers/mmc/core/mmc_ops.h index 653eb8e8417..80ae9f4e029 100644 --- a/drivers/mmc/core/mmc_ops.h +++ b/drivers/mmc/core/mmc_ops.h @@ -20,12 +20,12 @@ int mmc_all_send_cid(struct mmc_host *host, u32 *cid); int mmc_set_relative_addr(struct mmc_card *card); int mmc_send_csd(struct mmc_card *card, u32 *csd); int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd); -int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value); int mmc_send_status(struct mmc_card *card, u32 *status); int mmc_send_cid(struct mmc_host *host, u32 *cid); int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp); int mmc_spi_set_crc(struct mmc_host *host, int use_crc); -int mmc_card_sleepawake(struct mmc_host *host, int sleep); +int mmc_bus_test(struct mmc_card *card, u8 bus_width); +int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status); #endif diff --git a/drivers/mmc/core/quirks.c b/drivers/mmc/core/quirks.c new file mode 100644 index 00000000000..6c36fccaa1e --- /dev/null +++ b/drivers/mmc/core/quirks.c @@ -0,0 +1,99 @@ +/* + * This file contains work-arounds for many known SD/MMC + * and SDIO hardware bugs. + * + * Copyright (c) 2011 Andrei Warkentin <andreiw@motorola.com> + * Copyright (c) 2011 Pierre Tardy <tardyp@gmail.com> + * Inspired from pci fixup code: + * Copyright (c) 1999 Martin Mares <mj@ucw.cz> + * + */ + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/export.h> +#include <linux/mmc/card.h> +#include <linux/mmc/sdio_ids.h> + +#ifndef SDIO_VENDOR_ID_TI +#define SDIO_VENDOR_ID_TI 0x0097 +#endif + +#ifndef SDIO_DEVICE_ID_TI_WL1271 +#define SDIO_DEVICE_ID_TI_WL1271 0x4076 +#endif + +#ifndef SDIO_VENDOR_ID_STE +#define SDIO_VENDOR_ID_STE 0x0020 +#endif + +#ifndef SDIO_DEVICE_ID_STE_CW1200 +#define SDIO_DEVICE_ID_STE_CW1200 0x2280 +#endif + +#ifndef SDIO_DEVICE_ID_MARVELL_8797_F0 +#define SDIO_DEVICE_ID_MARVELL_8797_F0 0x9128 +#endif + +/* + * This hook just adds a quirk for all sdio devices + */ +static void add_quirk_for_sdio_devices(struct mmc_card *card, int data) +{ + if (mmc_card_sdio(card)) + card->quirks |= data; +} + +static const struct mmc_fixup mmc_fixup_methods[] = { + /* by default sdio devices are considered CLK_GATING broken */ + /* good cards will be whitelisted as they are tested */ + SDIO_FIXUP(SDIO_ANY_ID, SDIO_ANY_ID, + add_quirk_for_sdio_devices, + MMC_QUIRK_BROKEN_CLK_GATING), + + SDIO_FIXUP(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1271, + remove_quirk, MMC_QUIRK_BROKEN_CLK_GATING), + + SDIO_FIXUP(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1271, + add_quirk, MMC_QUIRK_NONSTD_FUNC_IF), + + SDIO_FIXUP(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1271, + add_quirk, MMC_QUIRK_DISABLE_CD), + + SDIO_FIXUP(SDIO_VENDOR_ID_STE, SDIO_DEVICE_ID_STE_CW1200, + add_quirk, MMC_QUIRK_BROKEN_BYTE_MODE_512), + + SDIO_FIXUP(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8797_F0, + add_quirk, MMC_QUIRK_BROKEN_IRQ_POLLING), + + END_FIXUP +}; + +void mmc_fixup_device(struct mmc_card *card, const struct mmc_fixup *table) +{ + const struct mmc_fixup *f; + u64 rev = cid_rev_card(card); + + /* Non-core specific workarounds. */ + if (!table) + table = mmc_fixup_methods; + + for (f = table; f->vendor_fixup; f++) { + if ((f->manfid == CID_MANFID_ANY || + f->manfid == card->cid.manfid) && + (f->oemid == CID_OEMID_ANY || + f->oemid == card->cid.oemid) && + (f->name == CID_NAME_ANY || + !strncmp(f->name, card->cid.prod_name, + sizeof(card->cid.prod_name))) && + (f->cis_vendor == card->cis.vendor || + f->cis_vendor == (u16) SDIO_ANY_ID) && + (f->cis_device == card->cis.device || + f->cis_device == (u16) SDIO_ANY_ID) && + rev >= f->rev_start && rev <= f->rev_end) { + dev_dbg(&card->dev, "calling %pF\n", f->vendor_fixup); + f->vendor_fixup(card, f->data); + } + } +} +EXPORT_SYMBOL(mmc_fixup_device); diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 49da4dffd28..0c44510bf71 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -11,7 +11,10 @@ */ #include <linux/err.h> +#include <linux/sizes.h> #include <linux/slab.h> +#include <linux/stat.h> +#include <linux/pm_runtime.h> #include <linux/mmc/host.h> #include <linux/mmc/card.h> @@ -21,6 +24,7 @@ #include "core.h" #include "bus.h" #include "mmc_ops.h" +#include "sd.h" #include "sd_ops.h" static const unsigned int tran_exp[] = { @@ -42,6 +46,13 @@ static const unsigned int tacc_mant[] = { 35, 40, 45, 50, 55, 60, 70, 80, }; +static const unsigned int sd_au_size[] = { + 0, SZ_16K / 512, SZ_32K / 512, SZ_64K / 512, + SZ_128K / 512, SZ_256K / 512, SZ_512K / 512, SZ_1M / 512, + SZ_2M / 512, SZ_4M / 512, SZ_8M / 512, (SZ_8M + SZ_4M) / 512, + SZ_16M / 512, (SZ_16M + SZ_8M) / 512, SZ_32M / 512, SZ_64M / 512, +}; + #define UNSTUFF_BITS(resp,start,size) \ ({ \ const int __size = size; \ @@ -129,7 +140,7 @@ static int mmc_decode_csd(struct mmc_card *card) break; case 1: /* - * This is a block-addressed SDHC card. Most + * This is a block-addressed SDHC or SDXC card. Most * interesting fields are unused and have fixed * values. To avoid getting tripped by buggy cards, * we assume those fixed values ourselves. @@ -143,6 +154,11 @@ static int mmc_decode_csd(struct mmc_card *card) e = UNSTUFF_BITS(resp, 96, 3); csd->max_dtr = tran_exp[e] * tran_mant[m]; csd->cmdclass = UNSTUFF_BITS(resp, 84, 12); + csd->c_size = UNSTUFF_BITS(resp, 48, 22); + + /* SDXC cards have a minimum C_SIZE of 0x00FFFF */ + if (csd->c_size >= 0xFFFF) + mmc_card_set_ext_capacity(card); m = UNSTUFF_BITS(resp, 48, 22); csd->capacity = (1 + m) << 10; @@ -157,7 +173,7 @@ static int mmc_decode_csd(struct mmc_card *card) csd->erase_size = 1; break; default: - printk(KERN_ERR "%s: unrecognised CSD structure version %d\n", + pr_err("%s: unrecognised CSD structure version %d\n", mmc_hostname(card->host), csd_struct); return -EINVAL; } @@ -181,19 +197,24 @@ static int mmc_decode_scr(struct mmc_card *card) scr_struct = UNSTUFF_BITS(resp, 60, 4); if (scr_struct != 0) { - printk(KERN_ERR "%s: unrecognised SCR structure version %d\n", + pr_err("%s: unrecognised SCR structure version %d\n", mmc_hostname(card->host), scr_struct); return -EINVAL; } scr->sda_vsn = UNSTUFF_BITS(resp, 56, 4); scr->bus_widths = UNSTUFF_BITS(resp, 48, 4); + if (scr->sda_vsn == SCR_SPEC_VER_2) + /* Check if Physical Layer Spec v3.0 is supported */ + scr->sda_spec3 = UNSTUFF_BITS(resp, 47, 1); if (UNSTUFF_BITS(resp, 55, 1)) card->erased_byte = 0xFF; else card->erased_byte = 0x0; + if (scr->sda_spec3) + scr->cmds = UNSTUFF_BITS(resp, 32, 2); return 0; } @@ -207,7 +228,7 @@ static int mmc_read_ssr(struct mmc_card *card) u32 *ssr; if (!(card->csd.cmdclass & CCC_APP_SPEC)) { - printk(KERN_WARNING "%s: card lacks mandatory SD Status " + pr_warning("%s: card lacks mandatory SD Status " "function.\n", mmc_hostname(card->host)); return 0; } @@ -218,7 +239,7 @@ static int mmc_read_ssr(struct mmc_card *card) err = mmc_app_sd_status(card, ssr); if (err) { - printk(KERN_WARNING "%s: problem reading SD Status " + pr_warning("%s: problem reading SD Status " "register.\n", mmc_hostname(card->host)); err = 0; goto out; @@ -232,18 +253,20 @@ static int mmc_read_ssr(struct mmc_card *card) * bitfield positions accordingly. */ au = UNSTUFF_BITS(ssr, 428 - 384, 4); - if (au > 0 || au <= 9) { - card->ssr.au = 1 << (au + 4); - es = UNSTUFF_BITS(ssr, 408 - 384, 16); - et = UNSTUFF_BITS(ssr, 402 - 384, 6); - eo = UNSTUFF_BITS(ssr, 400 - 384, 2); - if (es && et) { - card->ssr.erase_timeout = (et * 1000) / es; - card->ssr.erase_offset = eo * 1000; + if (au) { + if (au <= 9 || card->scr.sda_spec3) { + card->ssr.au = sd_au_size[au]; + es = UNSTUFF_BITS(ssr, 408 - 384, 16); + et = UNSTUFF_BITS(ssr, 402 - 384, 6); + if (es && et) { + eo = UNSTUFF_BITS(ssr, 400 - 384, 2); + card->ssr.erase_timeout = (et * 1000) / es; + card->ssr.erase_offset = eo * 1000; + } + } else { + pr_warning("%s: SD Status: Invalid Allocation Unit size.\n", + mmc_hostname(card->host)); } - } else { - printk(KERN_WARNING "%s: SD Status: Invalid Allocation Unit " - "size.\n", mmc_hostname(card->host)); } out: kfree(ssr); @@ -262,7 +285,7 @@ static int mmc_read_switch(struct mmc_card *card) return 0; if (!(card->csd.cmdclass & CCC_SWITCH)) { - printk(KERN_WARNING "%s: card lacks mandatory switch " + pr_warning("%s: card lacks mandatory switch " "function, performance might suffer.\n", mmc_hostname(card->host)); return 0; @@ -272,30 +295,41 @@ static int mmc_read_switch(struct mmc_card *card) status = kmalloc(64, GFP_KERNEL); if (!status) { - printk(KERN_ERR "%s: could not allocate a buffer for " - "switch capabilities.\n", mmc_hostname(card->host)); + pr_err("%s: could not allocate a buffer for " + "switch capabilities.\n", + mmc_hostname(card->host)); return -ENOMEM; } - err = mmc_sd_switch(card, 0, 0, 1, status); + /* + * Find out the card's support bits with a mode 0 operation. + * The argument does not matter, as the support bits do not + * change with the arguments. + */ + err = mmc_sd_switch(card, 0, 0, 0, status); if (err) { - /* If the host or the card can't do the switch, - * fail more gracefully. */ - if ((err != -EINVAL) - && (err != -ENOSYS) - && (err != -EFAULT)) + /* + * If the host or the card can't do the switch, + * fail more gracefully. + */ + if (err != -EINVAL && err != -ENOSYS && err != -EFAULT) goto out; - printk(KERN_WARNING "%s: problem reading switch " - "capabilities, performance might suffer.\n", + pr_warning("%s: problem reading Bus Speed modes.\n", mmc_hostname(card->host)); err = 0; goto out; } - if (status[13] & 0x02) - card->sw_caps.hs_max_dtr = 50000000; + if (status[13] & SD_MODE_HIGH_SPEED) + card->sw_caps.hs_max_dtr = HIGH_SPEED_MAX_DTR; + + if (card->scr.sda_spec3) { + card->sw_caps.sd3_bus_mode = status[13]; + /* Driver Strengths supported by the card */ + card->sw_caps.sd3_drv_type = status[9]; + } out: kfree(status); @@ -327,7 +361,7 @@ int mmc_sd_switch_hs(struct mmc_card *card) status = kmalloc(64, GFP_KERNEL); if (!status) { - printk(KERN_ERR "%s: could not allocate a buffer for " + pr_err("%s: could not allocate a buffer for " "switch capabilities.\n", mmc_hostname(card->host)); return -ENOMEM; } @@ -337,7 +371,7 @@ int mmc_sd_switch_hs(struct mmc_card *card) goto out; if ((status[16] & 0xF) != 1) { - printk(KERN_WARNING "%s: Problem switching card " + pr_warning("%s: Problem switching card " "into high-speed mode!\n", mmc_hostname(card->host)); err = 0; @@ -351,6 +385,297 @@ out: return err; } +static int sd_select_driver_type(struct mmc_card *card, u8 *status) +{ + int host_drv_type = SD_DRIVER_TYPE_B; + int card_drv_type = SD_DRIVER_TYPE_B; + int drive_strength; + int err; + + /* + * If the host doesn't support any of the Driver Types A,C or D, + * or there is no board specific handler then default Driver + * Type B is used. + */ + if (!(card->host->caps & (MMC_CAP_DRIVER_TYPE_A | MMC_CAP_DRIVER_TYPE_C + | MMC_CAP_DRIVER_TYPE_D))) + return 0; + + if (!card->host->ops->select_drive_strength) + return 0; + + if (card->host->caps & MMC_CAP_DRIVER_TYPE_A) + host_drv_type |= SD_DRIVER_TYPE_A; + + if (card->host->caps & MMC_CAP_DRIVER_TYPE_C) + host_drv_type |= SD_DRIVER_TYPE_C; + + if (card->host->caps & MMC_CAP_DRIVER_TYPE_D) + host_drv_type |= SD_DRIVER_TYPE_D; + + if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_A) + card_drv_type |= SD_DRIVER_TYPE_A; + + if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_C) + card_drv_type |= SD_DRIVER_TYPE_C; + + if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_D) + card_drv_type |= SD_DRIVER_TYPE_D; + + /* + * The drive strength that the hardware can support + * depends on the board design. Pass the appropriate + * information and let the hardware specific code + * return what is possible given the options + */ + mmc_host_clk_hold(card->host); + drive_strength = card->host->ops->select_drive_strength( + card->sw_caps.uhs_max_dtr, + host_drv_type, card_drv_type); + mmc_host_clk_release(card->host); + + err = mmc_sd_switch(card, 1, 2, drive_strength, status); + if (err) + return err; + + if ((status[15] & 0xF) != drive_strength) { + pr_warning("%s: Problem setting drive strength!\n", + mmc_hostname(card->host)); + return 0; + } + + mmc_set_driver_type(card->host, drive_strength); + + return 0; +} + +static void sd_update_bus_speed_mode(struct mmc_card *card) +{ + /* + * If the host doesn't support any of the UHS-I modes, fallback on + * default speed. + */ + if (!mmc_host_uhs(card->host)) { + card->sd_bus_speed = 0; + return; + } + + if ((card->host->caps & MMC_CAP_UHS_SDR104) && + (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR104)) { + card->sd_bus_speed = UHS_SDR104_BUS_SPEED; + } else if ((card->host->caps & MMC_CAP_UHS_DDR50) && + (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_DDR50)) { + card->sd_bus_speed = UHS_DDR50_BUS_SPEED; + } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 | + MMC_CAP_UHS_SDR50)) && (card->sw_caps.sd3_bus_mode & + SD_MODE_UHS_SDR50)) { + card->sd_bus_speed = UHS_SDR50_BUS_SPEED; + } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 | + MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25)) && + (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR25)) { + card->sd_bus_speed = UHS_SDR25_BUS_SPEED; + } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 | + MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25 | + MMC_CAP_UHS_SDR12)) && (card->sw_caps.sd3_bus_mode & + SD_MODE_UHS_SDR12)) { + card->sd_bus_speed = UHS_SDR12_BUS_SPEED; + } +} + +static int sd_set_bus_speed_mode(struct mmc_card *card, u8 *status) +{ + int err; + unsigned int timing = 0; + + switch (card->sd_bus_speed) { + case UHS_SDR104_BUS_SPEED: + timing = MMC_TIMING_UHS_SDR104; + card->sw_caps.uhs_max_dtr = UHS_SDR104_MAX_DTR; + break; + case UHS_DDR50_BUS_SPEED: + timing = MMC_TIMING_UHS_DDR50; + card->sw_caps.uhs_max_dtr = UHS_DDR50_MAX_DTR; + break; + case UHS_SDR50_BUS_SPEED: + timing = MMC_TIMING_UHS_SDR50; + card->sw_caps.uhs_max_dtr = UHS_SDR50_MAX_DTR; + break; + case UHS_SDR25_BUS_SPEED: + timing = MMC_TIMING_UHS_SDR25; + card->sw_caps.uhs_max_dtr = UHS_SDR25_MAX_DTR; + break; + case UHS_SDR12_BUS_SPEED: + timing = MMC_TIMING_UHS_SDR12; + card->sw_caps.uhs_max_dtr = UHS_SDR12_MAX_DTR; + break; + default: + return 0; + } + + err = mmc_sd_switch(card, 1, 0, card->sd_bus_speed, status); + if (err) + return err; + + if ((status[16] & 0xF) != card->sd_bus_speed) + pr_warning("%s: Problem setting bus speed mode!\n", + mmc_hostname(card->host)); + else { + mmc_set_timing(card->host, timing); + mmc_set_clock(card->host, card->sw_caps.uhs_max_dtr); + } + + return 0; +} + +/* Get host's max current setting at its current voltage */ +static u32 sd_get_host_max_current(struct mmc_host *host) +{ + u32 voltage, max_current; + + voltage = 1 << host->ios.vdd; + switch (voltage) { + case MMC_VDD_165_195: + max_current = host->max_current_180; + break; + case MMC_VDD_29_30: + case MMC_VDD_30_31: + max_current = host->max_current_300; + break; + case MMC_VDD_32_33: + case MMC_VDD_33_34: + max_current = host->max_current_330; + break; + default: + max_current = 0; + } + + return max_current; +} + +static int sd_set_current_limit(struct mmc_card *card, u8 *status) +{ + int current_limit = SD_SET_CURRENT_NO_CHANGE; + int err; + u32 max_current; + + /* + * Current limit switch is only defined for SDR50, SDR104, and DDR50 + * bus speed modes. For other bus speed modes, we do not change the + * current limit. + */ + if ((card->sd_bus_speed != UHS_SDR50_BUS_SPEED) && + (card->sd_bus_speed != UHS_SDR104_BUS_SPEED) && + (card->sd_bus_speed != UHS_DDR50_BUS_SPEED)) + return 0; + + /* + * Host has different current capabilities when operating at + * different voltages, so find out its max current first. + */ + max_current = sd_get_host_max_current(card->host); + + /* + * We only check host's capability here, if we set a limit that is + * higher than the card's maximum current, the card will be using its + * maximum current, e.g. if the card's maximum current is 300ma, and + * when we set current limit to 200ma, the card will draw 200ma, and + * when we set current limit to 400/600/800ma, the card will draw its + * maximum 300ma from the host. + */ + if (max_current >= 800) + current_limit = SD_SET_CURRENT_LIMIT_800; + else if (max_current >= 600) + current_limit = SD_SET_CURRENT_LIMIT_600; + else if (max_current >= 400) + current_limit = SD_SET_CURRENT_LIMIT_400; + else if (max_current >= 200) + current_limit = SD_SET_CURRENT_LIMIT_200; + + if (current_limit != SD_SET_CURRENT_NO_CHANGE) { + err = mmc_sd_switch(card, 1, 3, current_limit, status); + if (err) + return err; + + if (((status[15] >> 4) & 0x0F) != current_limit) + pr_warning("%s: Problem setting current limit!\n", + mmc_hostname(card->host)); + + } + + return 0; +} + +/* + * UHS-I specific initialization procedure + */ +static int mmc_sd_init_uhs_card(struct mmc_card *card) +{ + int err; + u8 *status; + + if (!card->scr.sda_spec3) + return 0; + + if (!(card->csd.cmdclass & CCC_SWITCH)) + return 0; + + status = kmalloc(64, GFP_KERNEL); + if (!status) { + pr_err("%s: could not allocate a buffer for " + "switch capabilities.\n", mmc_hostname(card->host)); + return -ENOMEM; + } + + /* Set 4-bit bus width */ + if ((card->host->caps & MMC_CAP_4_BIT_DATA) && + (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) { + err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_4); + if (err) + goto out; + + mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4); + } + + /* + * Select the bus speed mode depending on host + * and card capability. + */ + sd_update_bus_speed_mode(card); + + /* Set the driver strength for the card */ + err = sd_select_driver_type(card, status); + if (err) + goto out; + + /* Set current limit for the card */ + err = sd_set_current_limit(card, status); + if (err) + goto out; + + /* Set bus speed mode of the card */ + err = sd_set_bus_speed_mode(card, status); + if (err) + goto out; + + /* + * SPI mode doesn't define CMD19 and tuning is only valid for SDR50 and + * SDR104 mode SD-cards. Note that tuning is mandatory for SDR104. + */ + if (!mmc_host_is_spi(card->host) && card->host->ops->execute_tuning && + (card->sd_bus_speed == UHS_SDR50_BUS_SPEED || + card->sd_bus_speed == UHS_SDR104_BUS_SPEED)) { + mmc_host_clk_hold(card->host); + err = card->host->ops->execute_tuning(card->host, + MMC_SEND_TUNING_BLOCK); + mmc_host_clk_release(card->host); + } + +out: + kfree(status); + + return err; +} + MMC_DEV_ATTR(cid, "%08x%08x%08x%08x\n", card->raw_cid[0], card->raw_cid[1], card->raw_cid[2], card->raw_cid[3]); MMC_DEV_ATTR(csd, "%08x%08x%08x%08x\n", card->raw_csd[0], card->raw_csd[1], @@ -382,26 +707,28 @@ static struct attribute *sd_std_attrs[] = { &dev_attr_serial.attr, NULL, }; - -static struct attribute_group sd_std_attr_group = { - .attrs = sd_std_attrs, -}; - -static const struct attribute_group *sd_attr_groups[] = { - &sd_std_attr_group, - NULL, -}; +ATTRIBUTE_GROUPS(sd_std); struct device_type sd_type = { - .groups = sd_attr_groups, + .groups = sd_std_groups, }; /* * Fetch CID from card. */ -int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid) +int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr) { int err; + u32 max_current; + int retries = 10; + u32 pocr = ocr; + +try_again: + if (!retries) { + ocr &= ~SD_OCR_S18R; + pr_warning("%s: Skipping voltage switch\n", + mmc_hostname(host)); + } /* * Since we're changing the OCR value, we seem to @@ -419,12 +746,45 @@ int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid) */ err = mmc_send_if_cond(host, ocr); if (!err) - ocr |= 1 << 30; + ocr |= SD_OCR_CCS; + + /* + * If the host supports one of UHS-I modes, request the card + * to switch to 1.8V signaling level. If the card has failed + * repeatedly to switch however, skip this. + */ + if (retries && mmc_host_uhs(host)) + ocr |= SD_OCR_S18R; - err = mmc_send_app_op_cond(host, ocr, NULL); + /* + * If the host can supply more than 150mA at current voltage, + * XPC should be set to 1. + */ + max_current = sd_get_host_max_current(host); + if (max_current > 150) + ocr |= SD_OCR_XPC; + + err = mmc_send_app_op_cond(host, ocr, rocr); if (err) return err; + /* + * In case CCS and S18A in the response is set, start Signal Voltage + * Switch procedure. SPI mode doesn't support CMD11. + */ + if (!mmc_host_is_spi(host) && rocr && + ((*rocr & 0x41000000) == 0x41000000)) { + err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180, + pocr); + if (err == -EAGAIN) { + retries--; + goto try_again; + } else if (err) { + retries = 0; + goto try_again; + } + } + if (mmc_host_is_spi(host)) err = mmc_send_cid(host, cid); else @@ -504,11 +864,14 @@ int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card, if (!reinit) { int ro = -1; - if (host->ops->get_ro) + if (host->ops->get_ro) { + mmc_host_clk_hold(card->host); ro = host->ops->get_ro(host); + mmc_host_clk_release(card->host); + } if (ro < 0) { - printk(KERN_WARNING "%s: host does not " + pr_warning("%s: host does not " "support reading read-only " "switch. assuming write-enable.\n", mmc_hostname(host)); @@ -524,7 +887,7 @@ unsigned mmc_sd_get_max_clock(struct mmc_card *card) { unsigned max_dtr = (unsigned int)-1; - if (mmc_card_highspeed(card)) { + if (mmc_card_hs(card)) { if (max_dtr > card->sw_caps.hs_max_dtr) max_dtr = card->sw_caps.hs_max_dtr; } else if (max_dtr > card->csd.max_dtr) { @@ -534,12 +897,6 @@ unsigned mmc_sd_get_max_clock(struct mmc_card *card) return max_dtr; } -void mmc_sd_go_highspeed(struct mmc_card *card) -{ - mmc_card_set_highspeed(card); - mmc_set_timing(card->host, MMC_TIMING_SD_HS); -} - /* * Handle the detection and initialisation of a card. * @@ -552,11 +909,12 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, struct mmc_card *card; int err; u32 cid[4]; + u32 rocr = 0; BUG_ON(!host); WARN_ON(!host->claimed); - err = mmc_sd_get_cid(host, ocr, cid); + err = mmc_sd_get_cid(host, ocr, cid, &rocr); if (err) return err; @@ -573,6 +931,7 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, if (IS_ERR(card)) return PTR_ERR(card); + card->ocr = ocr; card->type = MMC_TYPE_SD; memcpy(card->raw_cid, cid, sizeof(card->raw_cid)); } @@ -583,15 +942,13 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, if (!mmc_host_is_spi(host)) { err = mmc_send_relative_addr(host, &card->rca); if (err) - return err; - - mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL); + goto free_card; } if (!oldcard) { err = mmc_sd_get_csd(host, card); if (err) - return err; + goto free_card; mmc_decode_cid(card); } @@ -602,37 +959,44 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, if (!mmc_host_is_spi(host)) { err = mmc_select_card(card); if (err) - return err; + goto free_card; } err = mmc_sd_setup_card(host, card, oldcard != NULL); if (err) goto free_card; - /* - * Attempt to change to high-speed (if supported) - */ - err = mmc_sd_switch_hs(card); - if (err > 0) - mmc_sd_go_highspeed(card); - else if (err) - goto free_card; - - /* - * Set bus speed. - */ - mmc_set_clock(host, mmc_sd_get_max_clock(card)); - - /* - * Switch to wider bus (if supported). - */ - if ((host->caps & MMC_CAP_4_BIT_DATA) && - (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) { - err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_4); + /* Initialization sequence for UHS-I cards */ + if (rocr & SD_ROCR_S18A) { + err = mmc_sd_init_uhs_card(card); if (err) goto free_card; + } else { + /* + * Attempt to change to high-speed (if supported) + */ + err = mmc_sd_switch_hs(card); + if (err > 0) + mmc_set_timing(card->host, MMC_TIMING_SD_HS); + else if (err) + goto free_card; + + /* + * Set bus speed. + */ + mmc_set_clock(host, mmc_sd_get_max_clock(card)); - mmc_set_bus_width(host, MMC_BUS_WIDTH_4); + /* + * Switch to wider bus (if supported). + */ + if ((host->caps & MMC_CAP_4_BIT_DATA) && + (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) { + err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_4); + if (err) + goto free_card; + + mmc_set_bus_width(host, MMC_BUS_WIDTH_4); + } } host->card = card; @@ -658,6 +1022,14 @@ static void mmc_sd_remove(struct mmc_host *host) } /* + * Card detection - card is alive. + */ +static int mmc_sd_alive(struct mmc_host *host) +{ + return mmc_send_status(host->card, NULL); +} + +/* * Card detection callback from host. */ static void mmc_sd_detect(struct mmc_host *host) @@ -667,68 +1039,150 @@ static void mmc_sd_detect(struct mmc_host *host) BUG_ON(!host); BUG_ON(!host->card); - mmc_claim_host(host); + mmc_get_card(host->card); /* * Just check if our card has been removed. */ - err = mmc_send_status(host->card, NULL); + err = _mmc_detect_card_removed(host); - mmc_release_host(host); + mmc_put_card(host->card); if (err) { mmc_sd_remove(host); mmc_claim_host(host); mmc_detach_bus(host); + mmc_power_off(host); mmc_release_host(host); } } -/* - * Suspend callback from host. - */ -static int mmc_sd_suspend(struct mmc_host *host) +static int _mmc_sd_suspend(struct mmc_host *host) { + int err = 0; + BUG_ON(!host); BUG_ON(!host->card); mmc_claim_host(host); + + if (mmc_card_suspended(host->card)) + goto out; + if (!mmc_host_is_spi(host)) - mmc_deselect_cards(host); - host->card->state &= ~MMC_STATE_HIGHSPEED; + err = mmc_deselect_cards(host); + + if (!err) { + mmc_power_off(host); + mmc_card_set_suspended(host->card); + } + +out: mmc_release_host(host); + return err; +} - return 0; +/* + * Callback for suspend + */ +static int mmc_sd_suspend(struct mmc_host *host) +{ + int err; + + err = _mmc_sd_suspend(host); + if (!err) { + pm_runtime_disable(&host->card->dev); + pm_runtime_set_suspended(&host->card->dev); + } + + return err; } /* - * Resume callback from host. - * * This function tries to determine if the same card is still present * and, if so, restore all state to it. */ -static int mmc_sd_resume(struct mmc_host *host) +static int _mmc_sd_resume(struct mmc_host *host) { - int err; + int err = 0; BUG_ON(!host); BUG_ON(!host->card); mmc_claim_host(host); - err = mmc_sd_init_card(host, host->ocr, host->card); + + if (!mmc_card_suspended(host->card)) + goto out; + + mmc_power_up(host, host->card->ocr); + err = mmc_sd_init_card(host, host->card->ocr, host->card); + mmc_card_clr_suspended(host->card); + +out: mmc_release_host(host); + return err; +} + +/* + * Callback for resume + */ +static int mmc_sd_resume(struct mmc_host *host) +{ + int err = 0; + + if (!(host->caps & MMC_CAP_RUNTIME_RESUME)) { + err = _mmc_sd_resume(host); + pm_runtime_set_active(&host->card->dev); + pm_runtime_mark_last_busy(&host->card->dev); + } + pm_runtime_enable(&host->card->dev); + + return err; +} + +/* + * Callback for runtime_suspend. + */ +static int mmc_sd_runtime_suspend(struct mmc_host *host) +{ + int err; + + if (!(host->caps & MMC_CAP_AGGRESSIVE_PM)) + return 0; + + err = _mmc_sd_suspend(host); + if (err) + pr_err("%s: error %d doing aggessive suspend\n", + mmc_hostname(host), err); return err; } +/* + * Callback for runtime_resume. + */ +static int mmc_sd_runtime_resume(struct mmc_host *host) +{ + int err; + + if (!(host->caps & (MMC_CAP_AGGRESSIVE_PM | MMC_CAP_RUNTIME_RESUME))) + return 0; + + err = _mmc_sd_resume(host); + if (err) + pr_err("%s: error %d doing aggessive resume\n", + mmc_hostname(host), err); + + return 0; +} + static int mmc_sd_power_restore(struct mmc_host *host) { int ret; - host->card->state &= ~MMC_STATE_HIGHSPEED; mmc_claim_host(host); - ret = mmc_sd_init_card(host, host->ocr, host->card); + ret = mmc_sd_init_card(host, host->card->ocr, host->card); mmc_release_host(host); return ret; @@ -737,41 +1191,33 @@ static int mmc_sd_power_restore(struct mmc_host *host) static const struct mmc_bus_ops mmc_sd_ops = { .remove = mmc_sd_remove, .detect = mmc_sd_detect, - .suspend = NULL, - .resume = NULL, - .power_restore = mmc_sd_power_restore, -}; - -static const struct mmc_bus_ops mmc_sd_ops_unsafe = { - .remove = mmc_sd_remove, - .detect = mmc_sd_detect, + .runtime_suspend = mmc_sd_runtime_suspend, + .runtime_resume = mmc_sd_runtime_resume, .suspend = mmc_sd_suspend, .resume = mmc_sd_resume, .power_restore = mmc_sd_power_restore, + .alive = mmc_sd_alive, + .shutdown = mmc_sd_suspend, }; -static void mmc_sd_attach_bus_ops(struct mmc_host *host) -{ - const struct mmc_bus_ops *bus_ops; - - if (!mmc_card_is_removable(host)) - bus_ops = &mmc_sd_ops_unsafe; - else - bus_ops = &mmc_sd_ops; - mmc_attach_bus(host, bus_ops); -} - /* * Starting point for SD card init. */ -int mmc_attach_sd(struct mmc_host *host, u32 ocr) +int mmc_attach_sd(struct mmc_host *host) { int err; + u32 ocr, rocr; BUG_ON(!host); WARN_ON(!host->claimed); - mmc_sd_attach_bus_ops(host); + err = mmc_send_app_op_cond(host, 0, &ocr); + if (err) + return err; + + mmc_attach_bus(host, &mmc_sd_ops); + if (host->ocr_avail_sd) + host->ocr_avail = host->ocr_avail_sd; /* * We need to get OCR a different way for SPI. @@ -784,30 +1230,12 @@ int mmc_attach_sd(struct mmc_host *host, u32 ocr) goto err; } - /* - * Sanity check the voltages that the card claims to - * support. - */ - if (ocr & 0x7F) { - printk(KERN_WARNING "%s: card claims to support voltages " - "below the defined range. These will be ignored.\n", - mmc_hostname(host)); - ocr &= ~0x7F; - } - - if (ocr & MMC_VDD_165_195) { - printk(KERN_WARNING "%s: SD card claims to support the " - "incompletely defined 'low voltage range'. This " - "will be ignored.\n", mmc_hostname(host)); - ocr &= ~MMC_VDD_165_195; - } - - host->ocr = mmc_select_voltage(host, ocr); + rocr = mmc_select_voltage(host, ocr); /* * Can we support the voltage(s) of the card(s)? */ - if (!host->ocr) { + if (!rocr) { err = -EINVAL; goto err; } @@ -815,27 +1243,27 @@ int mmc_attach_sd(struct mmc_host *host, u32 ocr) /* * Detect and init the card. */ - err = mmc_sd_init_card(host, host->ocr, NULL); + err = mmc_sd_init_card(host, rocr, NULL); if (err) goto err; mmc_release_host(host); - err = mmc_add_card(host->card); + mmc_claim_host(host); if (err) goto remove_card; return 0; remove_card: + mmc_release_host(host); mmc_remove_card(host->card); host->card = NULL; mmc_claim_host(host); err: mmc_detach_bus(host); - mmc_release_host(host); - printk(KERN_ERR "%s: error %d whilst initialising SD card\n", + pr_err("%s: error %d whilst initialising SD card\n", mmc_hostname(host), err); return err; diff --git a/drivers/mmc/core/sd.h b/drivers/mmc/core/sd.h index 3d8800fa760..aab824a9a7f 100644 --- a/drivers/mmc/core/sd.h +++ b/drivers/mmc/core/sd.h @@ -5,13 +5,12 @@ extern struct device_type sd_type; -int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid); +int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr); int mmc_sd_get_csd(struct mmc_host *host, struct mmc_card *card); void mmc_decode_cid(struct mmc_card *card); int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card, bool reinit); unsigned mmc_sd_get_max_clock(struct mmc_card *card); int mmc_sd_switch_hs(struct mmc_card *card); -void mmc_sd_go_highspeed(struct mmc_card *card); #endif diff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c index 797cdb5887f..274ef00b446 100644 --- a/drivers/mmc/core/sd_ops.c +++ b/drivers/mmc/core/sd_ops.c @@ -9,7 +9,9 @@ * your option) any later version. */ +#include <linux/slab.h> #include <linux/types.h> +#include <linux/export.h> #include <linux/scatterlist.h> #include <linux/mmc/host.h> @@ -20,10 +22,10 @@ #include "core.h" #include "sd_ops.h" -static int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card) +int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card) { int err; - struct mmc_command cmd; + struct mmc_command cmd = {0}; BUG_ON(!host); BUG_ON(card && (card->host != host)); @@ -48,6 +50,7 @@ static int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card) return 0; } +EXPORT_SYMBOL_GPL(mmc_app_cmd); /** * mmc_wait_for_app_cmd - start an application command and wait for @@ -65,7 +68,7 @@ static int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card) int mmc_wait_for_app_cmd(struct mmc_host *host, struct mmc_card *card, struct mmc_command *cmd, int retries) { - struct mmc_request mrq; + struct mmc_request mrq = {NULL}; int i, err; @@ -118,13 +121,11 @@ EXPORT_SYMBOL(mmc_wait_for_app_cmd); int mmc_app_set_bus_width(struct mmc_card *card, int width) { int err; - struct mmc_command cmd; + struct mmc_command cmd = {0}; BUG_ON(!card); BUG_ON(!card->host); - memset(&cmd, 0, sizeof(struct mmc_command)); - cmd.opcode = SD_APP_SET_BUS_WIDTH; cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; @@ -148,13 +149,11 @@ int mmc_app_set_bus_width(struct mmc_card *card, int width) int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr) { - struct mmc_command cmd; + struct mmc_command cmd = {0}; int i, err = 0; BUG_ON(!host); - memset(&cmd, 0, sizeof(struct mmc_command)); - cmd.opcode = SD_APP_OP_COND; if (mmc_host_is_spi(host)) cmd.arg = ocr & (1 << 30); /* SPI only defines one bit */ @@ -193,7 +192,7 @@ int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr) int mmc_send_if_cond(struct mmc_host *host, u32 ocr) { - struct mmc_command cmd; + struct mmc_command cmd = {0}; int err; static const u8 test_pattern = 0xAA; u8 result_pattern; @@ -225,13 +224,11 @@ int mmc_send_if_cond(struct mmc_host *host, u32 ocr) int mmc_send_relative_addr(struct mmc_host *host, unsigned int *rca) { int err; - struct mmc_command cmd; + struct mmc_command cmd = {0}; BUG_ON(!host); BUG_ON(!rca); - memset(&cmd, 0, sizeof(struct mmc_command)); - cmd.opcode = SD_SEND_RELATIVE_ADDR; cmd.arg = 0; cmd.flags = MMC_RSP_R6 | MMC_CMD_BCR; @@ -248,10 +245,11 @@ int mmc_send_relative_addr(struct mmc_host *host, unsigned int *rca) int mmc_app_send_scr(struct mmc_card *card, u32 *scr) { int err; - struct mmc_request mrq; - struct mmc_command cmd; - struct mmc_data data; + struct mmc_request mrq = {NULL}; + struct mmc_command cmd = {0}; + struct mmc_data data = {0}; struct scatterlist sg; + void *data_buf; BUG_ON(!card); BUG_ON(!card->host); @@ -263,9 +261,12 @@ int mmc_app_send_scr(struct mmc_card *card, u32 *scr) if (err) return err; - memset(&mrq, 0, sizeof(struct mmc_request)); - memset(&cmd, 0, sizeof(struct mmc_command)); - memset(&data, 0, sizeof(struct mmc_data)); + /* dma onto stack is unsafe/nonportable, but callers to this + * routine normally provide temporary on-stack buffers ... + */ + data_buf = kmalloc(sizeof(card->raw_scr), GFP_KERNEL); + if (data_buf == NULL) + return -ENOMEM; mrq.cmd = &cmd; mrq.data = &data; @@ -280,12 +281,15 @@ int mmc_app_send_scr(struct mmc_card *card, u32 *scr) data.sg = &sg; data.sg_len = 1; - sg_init_one(&sg, scr, 8); + sg_init_one(&sg, data_buf, 8); mmc_set_data_timeout(&data, card); mmc_wait_for_req(card->host, &mrq); + memcpy(scr, data_buf, sizeof(card->raw_scr)); + kfree(data_buf); + if (cmd.error) return cmd.error; if (data.error) @@ -300,9 +304,9 @@ int mmc_app_send_scr(struct mmc_card *card, u32 *scr) int mmc_sd_switch(struct mmc_card *card, int mode, int group, u8 value, u8 *resp) { - struct mmc_request mrq; - struct mmc_command cmd; - struct mmc_data data; + struct mmc_request mrq = {NULL}; + struct mmc_command cmd = {0}; + struct mmc_data data = {0}; struct scatterlist sg; BUG_ON(!card); @@ -313,10 +317,6 @@ int mmc_sd_switch(struct mmc_card *card, int mode, int group, mode = !!mode; value &= 0xF; - memset(&mrq, 0, sizeof(struct mmc_request)); - memset(&cmd, 0, sizeof(struct mmc_command)); - memset(&data, 0, sizeof(struct mmc_data)); - mrq.cmd = &cmd; mrq.data = &data; @@ -349,9 +349,9 @@ int mmc_sd_switch(struct mmc_card *card, int mode, int group, int mmc_app_sd_status(struct mmc_card *card, void *ssr) { int err; - struct mmc_request mrq; - struct mmc_command cmd; - struct mmc_data data; + struct mmc_request mrq = {NULL}; + struct mmc_command cmd = {0}; + struct mmc_data data = {0}; struct scatterlist sg; BUG_ON(!card); @@ -364,10 +364,6 @@ int mmc_app_sd_status(struct mmc_card *card, void *ssr) if (err) return err; - memset(&mrq, 0, sizeof(struct mmc_request)); - memset(&cmd, 0, sizeof(struct mmc_command)); - memset(&data, 0, sizeof(struct mmc_data)); - mrq.cmd = &cmd; mrq.data = &data; diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index c3ad1058cd3..e636d9e99e4 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -14,8 +14,10 @@ #include <linux/mmc/host.h> #include <linux/mmc/card.h> +#include <linux/mmc/mmc.h> #include <linux/mmc/sdio.h> #include <linux/mmc/sdio_func.h> +#include <linux/mmc/sdio_ids.h> #include "core.h" #include "bus.h" @@ -31,6 +33,11 @@ static int sdio_read_fbr(struct sdio_func *func) int ret; unsigned char data; + if (mmc_card_nonstd_func_interface(func->card)) { + func->class = SDIO_CLASS_NONE; + return 0; + } + ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_FBR_BASE(func->num) + SDIO_FBR_STD_IF, 0, &data); if (ret) @@ -91,11 +98,13 @@ fail: return ret; } -static int sdio_read_cccr(struct mmc_card *card) +static int sdio_read_cccr(struct mmc_card *card, u32 ocr) { int ret; int cccr_vsn; + int uhs = ocr & R4_18V_PRESENT; unsigned char data; + unsigned char speed; memset(&card->cccr, 0, sizeof(struct sdio_cccr)); @@ -105,8 +114,8 @@ static int sdio_read_cccr(struct mmc_card *card) cccr_vsn = data & 0x0f; - if (cccr_vsn > SDIO_CCCR_REV_1_20) { - printk(KERN_ERR "%s: unrecognised CCCR structure version %d\n", + if (cccr_vsn > SDIO_CCCR_REV_3_00) { + pr_err("%s: unrecognised CCCR structure version %d\n", mmc_hostname(card->host), cccr_vsn); return -EINVAL; } @@ -134,12 +143,57 @@ static int sdio_read_cccr(struct mmc_card *card) } if (cccr_vsn >= SDIO_CCCR_REV_1_20) { - ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &data); + ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed); if (ret) goto out; - if (data & SDIO_SPEED_SHS) - card->cccr.high_speed = 1; + card->scr.sda_spec3 = 0; + card->sw_caps.sd3_bus_mode = 0; + card->sw_caps.sd3_drv_type = 0; + if (cccr_vsn >= SDIO_CCCR_REV_3_00 && uhs) { + card->scr.sda_spec3 = 1; + ret = mmc_io_rw_direct(card, 0, 0, + SDIO_CCCR_UHS, 0, &data); + if (ret) + goto out; + + if (mmc_host_uhs(card->host)) { + if (data & SDIO_UHS_DDR50) + card->sw_caps.sd3_bus_mode + |= SD_MODE_UHS_DDR50; + + if (data & SDIO_UHS_SDR50) + card->sw_caps.sd3_bus_mode + |= SD_MODE_UHS_SDR50; + + if (data & SDIO_UHS_SDR104) + card->sw_caps.sd3_bus_mode + |= SD_MODE_UHS_SDR104; + } + + ret = mmc_io_rw_direct(card, 0, 0, + SDIO_CCCR_DRIVE_STRENGTH, 0, &data); + if (ret) + goto out; + + if (data & SDIO_DRIVE_SDTA) + card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_A; + if (data & SDIO_DRIVE_SDTC) + card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_C; + if (data & SDIO_DRIVE_SDTD) + card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_D; + } + + /* if no uhs mode ensure we check for high speed */ + if (!card->sw_caps.sd3_bus_mode) { + if (speed & SDIO_SPEED_SHS) { + card->cccr.high_speed = 1; + card->sw_caps.hs_max_dtr = 50000000; + } else { + card->cccr.high_speed = 0; + card->sw_caps.hs_max_dtr = 25000000; + } + } } out: @@ -161,6 +215,12 @@ static int sdio_enable_wide(struct mmc_card *card) if (ret) return ret; + if ((ctrl & SDIO_BUS_WIDTH_MASK) == SDIO_BUS_WIDTH_RESERVED) + pr_warning("%s: SDIO_CCCR_IF is invalid: 0x%02x\n", + mmc_hostname(card->host), ctrl); + + /* set as 4-bit bus width */ + ctrl &= ~SDIO_BUS_WIDTH_MASK; ctrl |= SDIO_BUS_WIDTH_4BIT; ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL); @@ -181,7 +241,7 @@ static int sdio_disable_cd(struct mmc_card *card) int ret; u8 ctrl; - if (!card->cccr.disable_cd) + if (!mmc_card_disable_cd(card)) return 0; ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_IF, 0, &ctrl); @@ -303,7 +363,7 @@ static unsigned mmc_sdio_get_max_clock(struct mmc_card *card) { unsigned max_dtr; - if (mmc_card_highspeed(card)) { + if (mmc_card_hs(card)) { /* * The SDIO specification doesn't mention how * the CIS transfer speed register relates to @@ -321,6 +381,206 @@ static unsigned mmc_sdio_get_max_clock(struct mmc_card *card) return max_dtr; } +static unsigned char host_drive_to_sdio_drive(int host_strength) +{ + switch (host_strength) { + case MMC_SET_DRIVER_TYPE_A: + return SDIO_DTSx_SET_TYPE_A; + case MMC_SET_DRIVER_TYPE_B: + return SDIO_DTSx_SET_TYPE_B; + case MMC_SET_DRIVER_TYPE_C: + return SDIO_DTSx_SET_TYPE_C; + case MMC_SET_DRIVER_TYPE_D: + return SDIO_DTSx_SET_TYPE_D; + default: + return SDIO_DTSx_SET_TYPE_B; + } +} + +static void sdio_select_driver_type(struct mmc_card *card) +{ + int host_drv_type = SD_DRIVER_TYPE_B; + int card_drv_type = SD_DRIVER_TYPE_B; + int drive_strength; + unsigned char card_strength; + int err; + + /* + * If the host doesn't support any of the Driver Types A,C or D, + * or there is no board specific handler then default Driver + * Type B is used. + */ + if (!(card->host->caps & + (MMC_CAP_DRIVER_TYPE_A | + MMC_CAP_DRIVER_TYPE_C | + MMC_CAP_DRIVER_TYPE_D))) + return; + + if (!card->host->ops->select_drive_strength) + return; + + if (card->host->caps & MMC_CAP_DRIVER_TYPE_A) + host_drv_type |= SD_DRIVER_TYPE_A; + + if (card->host->caps & MMC_CAP_DRIVER_TYPE_C) + host_drv_type |= SD_DRIVER_TYPE_C; + + if (card->host->caps & MMC_CAP_DRIVER_TYPE_D) + host_drv_type |= SD_DRIVER_TYPE_D; + + if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_A) + card_drv_type |= SD_DRIVER_TYPE_A; + + if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_C) + card_drv_type |= SD_DRIVER_TYPE_C; + + if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_D) + card_drv_type |= SD_DRIVER_TYPE_D; + + /* + * The drive strength that the hardware can support + * depends on the board design. Pass the appropriate + * information and let the hardware specific code + * return what is possible given the options + */ + drive_strength = card->host->ops->select_drive_strength( + card->sw_caps.uhs_max_dtr, + host_drv_type, card_drv_type); + + /* if error just use default for drive strength B */ + err = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_DRIVE_STRENGTH, 0, + &card_strength); + if (err) + return; + + card_strength &= ~(SDIO_DRIVE_DTSx_MASK<<SDIO_DRIVE_DTSx_SHIFT); + card_strength |= host_drive_to_sdio_drive(drive_strength); + + err = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_DRIVE_STRENGTH, + card_strength, NULL); + + /* if error default to drive strength B */ + if (!err) + mmc_set_driver_type(card->host, drive_strength); +} + + +static int sdio_set_bus_speed_mode(struct mmc_card *card) +{ + unsigned int bus_speed, timing; + int err; + unsigned char speed; + + /* + * If the host doesn't support any of the UHS-I modes, fallback on + * default speed. + */ + if (!mmc_host_uhs(card->host)) + return 0; + + bus_speed = SDIO_SPEED_SDR12; + timing = MMC_TIMING_UHS_SDR12; + if ((card->host->caps & MMC_CAP_UHS_SDR104) && + (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR104)) { + bus_speed = SDIO_SPEED_SDR104; + timing = MMC_TIMING_UHS_SDR104; + card->sw_caps.uhs_max_dtr = UHS_SDR104_MAX_DTR; + card->sd_bus_speed = UHS_SDR104_BUS_SPEED; + } else if ((card->host->caps & MMC_CAP_UHS_DDR50) && + (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_DDR50)) { + bus_speed = SDIO_SPEED_DDR50; + timing = MMC_TIMING_UHS_DDR50; + card->sw_caps.uhs_max_dtr = UHS_DDR50_MAX_DTR; + card->sd_bus_speed = UHS_DDR50_BUS_SPEED; + } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 | + MMC_CAP_UHS_SDR50)) && (card->sw_caps.sd3_bus_mode & + SD_MODE_UHS_SDR50)) { + bus_speed = SDIO_SPEED_SDR50; + timing = MMC_TIMING_UHS_SDR50; + card->sw_caps.uhs_max_dtr = UHS_SDR50_MAX_DTR; + card->sd_bus_speed = UHS_SDR50_BUS_SPEED; + } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 | + MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25)) && + (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR25)) { + bus_speed = SDIO_SPEED_SDR25; + timing = MMC_TIMING_UHS_SDR25; + card->sw_caps.uhs_max_dtr = UHS_SDR25_MAX_DTR; + card->sd_bus_speed = UHS_SDR25_BUS_SPEED; + } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 | + MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25 | + MMC_CAP_UHS_SDR12)) && (card->sw_caps.sd3_bus_mode & + SD_MODE_UHS_SDR12)) { + bus_speed = SDIO_SPEED_SDR12; + timing = MMC_TIMING_UHS_SDR12; + card->sw_caps.uhs_max_dtr = UHS_SDR12_MAX_DTR; + card->sd_bus_speed = UHS_SDR12_BUS_SPEED; + } + + err = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed); + if (err) + return err; + + speed &= ~SDIO_SPEED_BSS_MASK; + speed |= bus_speed; + err = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_SPEED, speed, NULL); + if (err) + return err; + + if (bus_speed) { + mmc_set_timing(card->host, timing); + mmc_set_clock(card->host, card->sw_caps.uhs_max_dtr); + } + + return 0; +} + +/* + * UHS-I specific initialization procedure + */ +static int mmc_sdio_init_uhs_card(struct mmc_card *card) +{ + int err; + + if (!card->scr.sda_spec3) + return 0; + + /* + * Switch to wider bus (if supported). + */ + if (card->host->caps & MMC_CAP_4_BIT_DATA) { + err = sdio_enable_4bit_bus(card); + if (err > 0) { + mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4); + err = 0; + } + } + + /* Set the driver strength for the card */ + sdio_select_driver_type(card); + + /* Set bus speed mode of the card */ + err = sdio_set_bus_speed_mode(card); + if (err) + goto out; + + /* + * SPI mode doesn't define CMD19 and tuning is only valid for SDR50 and + * SDR104 mode SD-cards. Note that tuning is mandatory for SDR104. + */ + if (!mmc_host_is_spi(card->host) && card->host->ops->execute_tuning && + ((card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR50) || + (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR104))) { + mmc_host_clk_hold(card->host); + err = card->host->ops->execute_tuning(card->host, + MMC_SEND_TUNING_BLOCK); + mmc_host_clk_release(card->host); + } + +out: + + return err; +} + /* * Handle the detection and initialisation of a card. * @@ -332,15 +592,29 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, { struct mmc_card *card; int err; + int retries = 10; + u32 rocr = 0; + u32 ocr_card = ocr; BUG_ON(!host); WARN_ON(!host->claimed); + /* to query card if 1.8V signalling is supported */ + if (mmc_host_uhs(host)) + ocr |= R4_18V_PRESENT; + +try_again: + if (!retries) { + pr_warning("%s: Skipping voltage switch\n", + mmc_hostname(host)); + ocr &= ~R4_18V_PRESENT; + } + /* * Inform the card of the voltage */ if (!powered_resume) { - err = mmc_send_io_op_cond(host, host->ocr, &ocr); + err = mmc_send_io_op_cond(host, ocr, &rocr); if (err) goto err; } @@ -363,8 +637,8 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, goto err; } - if (ocr & R4_MEMORY_PRESENT - && mmc_sd_get_cid(host, host->ocr & ocr, card->raw_cid) == 0) { + if ((rocr & R4_MEMORY_PRESENT) && + mmc_sd_get_cid(host, ocr & rocr, card->raw_cid, NULL) == 0) { card->type = MMC_TYPE_SD_COMBO; if (oldcard && (oldcard->type != MMC_TYPE_SD_COMBO || @@ -388,6 +662,31 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, host->ops->init_card(host, card); /* + * If the host and card support UHS-I mode request the card + * to switch to 1.8V signaling level. No 1.8v signalling if + * UHS mode is not enabled to maintain compatibility and some + * systems that claim 1.8v signalling in fact do not support + * it. + */ + if (!powered_resume && (rocr & ocr & R4_18V_PRESENT)) { + err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180, + ocr); + if (err == -EAGAIN) { + sdio_reset(host); + mmc_go_idle(host); + mmc_send_if_cond(host, host->ocr_avail); + mmc_remove_card(card); + retries--; + goto try_again; + } else if (err) { + ocr &= ~R4_18V_PRESENT; + } + err = 0; + } else { + ocr &= ~R4_18V_PRESENT; + } + + /* * For native busses: set card RCA and quit open drain mode. */ if (!powered_resume && !mmc_host_is_spi(host)) { @@ -395,7 +694,13 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, if (err) goto remove; - mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL); + /* + * Update oldcard with the new RCA received from the SDIO + * device -- we're doing this so that it's updated in the + * "card" struct when oldcard overwrites that later. + */ + if (oldcard) + oldcard->rca = card->rca; } /* @@ -428,7 +733,6 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, mmc_set_clock(host, card->cis.max_dtr); if (card->cccr.high_speed) { - mmc_card_set_highspeed(card); mmc_set_timing(card->host, MMC_TIMING_SD_HS); } @@ -438,7 +742,7 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, /* * Read the common registers. */ - err = sdio_read_cccr(card); + err = sdio_read_cccr(card, ocr); if (err) goto remove; @@ -458,6 +762,8 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, card = oldcard; } + card->ocr = ocr_card; + mmc_fixup_device(card, NULL); if (card->type == MMC_TYPE_SD_COMBO) { err = mmc_sd_setup_card(host, card, oldcard != NULL); @@ -479,29 +785,36 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, if (err) goto remove; - /* - * Switch to high-speed (if supported). - */ - err = sdio_enable_hs(card); - if (err > 0) - mmc_sd_go_highspeed(card); - else if (err) - goto remove; - - /* - * Change to the card's maximum speed. - */ - mmc_set_clock(host, mmc_sdio_get_max_clock(card)); + /* Initialization sequence for UHS-I cards */ + /* Only if card supports 1.8v and UHS signaling */ + if ((ocr & R4_18V_PRESENT) && card->sw_caps.sd3_bus_mode) { + err = mmc_sdio_init_uhs_card(card); + if (err) + goto remove; + } else { + /* + * Switch to high-speed (if supported). + */ + err = sdio_enable_hs(card); + if (err > 0) + mmc_set_timing(card->host, MMC_TIMING_SD_HS); + else if (err) + goto remove; - /* - * Switch to wider bus (if supported). - */ - err = sdio_enable_4bit_bus(card); - if (err > 0) - mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4); - else if (err) - goto remove; + /* + * Change to the card's maximum speed. + */ + mmc_set_clock(host, mmc_sdio_get_max_clock(card)); + /* + * Switch to wider bus (if supported). + */ + err = sdio_enable_4bit_bus(card); + if (err > 0) + mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4); + else if (err) + goto remove; + } finish: if (!oldcard) host->card = card; @@ -537,6 +850,14 @@ static void mmc_sdio_remove(struct mmc_host *host) } /* + * Card detection - card is alive. + */ +static int mmc_sdio_alive(struct mmc_host *host) +{ + return mmc_select_card(host->card); +} + +/* * Card detection callback from host. */ static void mmc_sdio_detect(struct mmc_host *host) @@ -547,38 +868,54 @@ static void mmc_sdio_detect(struct mmc_host *host) BUG_ON(!host->card); /* Make sure card is powered before detecting it */ - err = pm_runtime_get_sync(&host->card->dev); - if (err < 0) - goto out; + if (host->caps & MMC_CAP_POWER_OFF_CARD) { + err = pm_runtime_get_sync(&host->card->dev); + if (err < 0) { + pm_runtime_put_noidle(&host->card->dev); + goto out; + } + } mmc_claim_host(host); /* * Just check if our card has been removed. */ - err = mmc_select_card(host->card); + err = _mmc_detect_card_removed(host); mmc_release_host(host); + /* + * Tell PM core it's OK to power off the card now. + * + * The _sync variant is used in order to ensure that the card + * is left powered off in case an error occurred, and the card + * is going to be removed. + * + * Since there is no specific reason to believe a new user + * is about to show up at this point, the _sync variant is + * desirable anyway. + */ + if (host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_put_sync(&host->card->dev); + out: if (err) { mmc_sdio_remove(host); mmc_claim_host(host); mmc_detach_bus(host); + mmc_power_off(host); mmc_release_host(host); } - - /* Tell PM core that we're done */ - pm_runtime_put(&host->card->dev); } /* - * SDIO suspend. We need to suspend all functions separately. + * SDIO pre_suspend. We need to suspend all functions separately. * Therefore all registered functions must have drivers with suspend * and resume methods. Failing that we simply remove the whole card. */ -static int mmc_sdio_suspend(struct mmc_host *host) +static int mmc_sdio_pre_suspend(struct mmc_host *host) { int i, err = 0; @@ -589,62 +926,77 @@ static int mmc_sdio_suspend(struct mmc_host *host) if (!pmops || !pmops->suspend || !pmops->resume) { /* force removal of entire card in that case */ err = -ENOSYS; - } else - err = pmops->suspend(&func->dev); - if (err) break; - } - } - while (err && --i >= 0) { - struct sdio_func *func = host->card->sdio_func[i]; - if (func && sdio_func_present(func) && func->dev.driver) { - const struct dev_pm_ops *pmops = func->dev.driver->pm; - pmops->resume(&func->dev); + } } } - if (!err && host->pm_flags & MMC_PM_KEEP_POWER) { + return err; +} + +/* + * SDIO suspend. Suspend all functions separately. + */ +static int mmc_sdio_suspend(struct mmc_host *host) +{ + if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) { mmc_claim_host(host); sdio_disable_wide(host->card); mmc_release_host(host); } - return err; + if (!mmc_card_keep_power(host)) + mmc_power_off(host); + + return 0; } static int mmc_sdio_resume(struct mmc_host *host) { - int i, err; + int err = 0; BUG_ON(!host); BUG_ON(!host->card); /* Basic card reinitialization. */ mmc_claim_host(host); - err = mmc_sdio_init_card(host, host->ocr, host->card, - (host->pm_flags & MMC_PM_KEEP_POWER)); - if (!err && host->sdio_irqs) - mmc_signal_sdio_irq(host); - mmc_release_host(host); - /* - * If the card looked to be the same as before suspending, then - * we proceed to resume all card functions. If one of them returns - * an error then we simply return that error to the core and the - * card will be redetected as new. It is the responsibility of - * the function driver to perform further tests with the extra - * knowledge it has of the card to confirm the card is indeed the - * same as before suspending (same MAC address for network cards, - * etc.) and return an error otherwise. - */ - for (i = 0; !err && i < host->card->sdio_funcs; i++) { - struct sdio_func *func = host->card->sdio_func[i]; - if (func && sdio_func_present(func) && func->dev.driver) { - const struct dev_pm_ops *pmops = func->dev.driver->pm; - err = pmops->resume(&func->dev); + /* Restore power if needed */ + if (!mmc_card_keep_power(host)) { + mmc_power_up(host, host->card->ocr); + /* + * Tell runtime PM core we just powered up the card, + * since it still believes the card is powered off. + * Note that currently runtime PM is only enabled + * for SDIO cards that are MMC_CAP_POWER_OFF_CARD + */ + if (host->caps & MMC_CAP_POWER_OFF_CARD) { + pm_runtime_disable(&host->card->dev); + pm_runtime_set_active(&host->card->dev); + pm_runtime_enable(&host->card->dev); } } + /* No need to reinitialize powered-resumed nonremovable cards */ + if (mmc_card_is_removable(host) || !mmc_card_keep_power(host)) { + sdio_reset(host); + mmc_go_idle(host); + err = mmc_sdio_init_card(host, host->card->ocr, host->card, + mmc_card_keep_power(host)); + } else if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) { + /* We may have switched to 1-bit mode during suspend */ + err = sdio_enable_4bit_bus(host->card); + if (err > 0) { + mmc_set_bus_width(host, MMC_BUS_WIDTH_4); + err = 0; + } + } + + if (!err && host->sdio_irqs) + wake_up_process(host->sdio_irq_thread); + mmc_release_host(host); + + host->pm_flags &= ~MMC_PM_KEEP_POWER; return err; } @@ -656,55 +1008,97 @@ static int mmc_sdio_power_restore(struct mmc_host *host) BUG_ON(!host->card); mmc_claim_host(host); - ret = mmc_sdio_init_card(host, host->ocr, host->card, - (host->pm_flags & MMC_PM_KEEP_POWER)); + + /* + * Reset the card by performing the same steps that are taken by + * mmc_rescan_try_freq() and mmc_attach_sdio() during a "normal" probe. + * + * sdio_reset() is technically not needed. Having just powered up the + * hardware, it should already be in reset state. However, some + * platforms (such as SD8686 on OLPC) do not instantly cut power, + * meaning that a reset is required when restoring power soon after + * powering off. It is harmless in other cases. + * + * The CMD5 reset (mmc_send_io_op_cond()), according to the SDIO spec, + * is not necessary for non-removable cards. However, it is required + * for OLPC SD8686 (which expects a [CMD5,5,3,7] init sequence), and + * harmless in other situations. + * + */ + + sdio_reset(host); + mmc_go_idle(host); + mmc_send_if_cond(host, host->ocr_avail); + + ret = mmc_send_io_op_cond(host, 0, NULL); + if (ret) + goto out; + + ret = mmc_sdio_init_card(host, host->card->ocr, host->card, + mmc_card_keep_power(host)); if (!ret && host->sdio_irqs) mmc_signal_sdio_irq(host); + +out: mmc_release_host(host); return ret; } +static int mmc_sdio_runtime_suspend(struct mmc_host *host) +{ + /* No references to the card, cut the power to it. */ + mmc_power_off(host); + return 0; +} + +static int mmc_sdio_runtime_resume(struct mmc_host *host) +{ + /* Restore power and re-initialize. */ + mmc_power_up(host, host->card->ocr); + return mmc_sdio_power_restore(host); +} + static const struct mmc_bus_ops mmc_sdio_ops = { .remove = mmc_sdio_remove, .detect = mmc_sdio_detect, + .pre_suspend = mmc_sdio_pre_suspend, .suspend = mmc_sdio_suspend, .resume = mmc_sdio_resume, + .runtime_suspend = mmc_sdio_runtime_suspend, + .runtime_resume = mmc_sdio_runtime_resume, .power_restore = mmc_sdio_power_restore, + .alive = mmc_sdio_alive, }; /* * Starting point for SDIO card init. */ -int mmc_attach_sdio(struct mmc_host *host, u32 ocr) +int mmc_attach_sdio(struct mmc_host *host) { - int err; - int i, funcs; + int err, i, funcs; + u32 ocr, rocr; struct mmc_card *card; BUG_ON(!host); WARN_ON(!host->claimed); + err = mmc_send_io_op_cond(host, 0, &ocr); + if (err) + return err; + mmc_attach_bus(host, &mmc_sdio_ops); + if (host->ocr_avail_sdio) + host->ocr_avail = host->ocr_avail_sdio; - /* - * Sanity check the voltages that the card claims to - * support. - */ - if (ocr & 0x7F) { - printk(KERN_WARNING "%s: card claims to support voltages " - "below the defined range. These will be ignored.\n", - mmc_hostname(host)); - ocr &= ~0x7F; - } - host->ocr = mmc_select_voltage(host, ocr); + rocr = mmc_select_voltage(host, ocr); /* * Can we support the voltage(s) of the card(s)? */ - if (!host->ocr) { + if (!rocr) { err = -EINVAL; goto err; } @@ -712,22 +1106,28 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr) /* * Detect and init the card. */ - err = mmc_sdio_init_card(host, host->ocr, NULL, 0); + err = mmc_sdio_init_card(host, rocr, NULL, 0); if (err) goto err; + card = host->card; /* - * Let runtime PM core know our card is active + * Enable runtime PM only if supported by host+card+board */ - err = pm_runtime_set_active(&card->dev); - if (err) - goto remove; + if (host->caps & MMC_CAP_POWER_OFF_CARD) { + /* + * Let runtime PM core know our card is active + */ + err = pm_runtime_set_active(&card->dev); + if (err) + goto remove; - /* - * Enable runtime PM for this card - */ - pm_runtime_enable(&card->dev); + /* + * Enable runtime PM for this card + */ + pm_runtime_enable(&card->dev); + } /* * The number of functions on the card is encoded inside @@ -745,16 +1145,16 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr) goto remove; /* - * Enable Runtime PM for this func + * Enable Runtime PM for this func (if supported) */ - pm_runtime_enable(&card->sdio_func[i]->dev); + if (host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_enable(&card->sdio_func[i]->dev); } - mmc_release_host(host); - /* * First add the card to the driver model... */ + mmc_release_host(host); err = mmc_add_card(host->card); if (err) goto remove_added; @@ -768,6 +1168,7 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr) goto remove_added; } + mmc_claim_host(host); return 0; @@ -777,13 +1178,14 @@ remove_added: mmc_claim_host(host); remove: /* And with lock if it hasn't been added. */ + mmc_release_host(host); if (host->card) mmc_sdio_remove(host); + mmc_claim_host(host); err: mmc_detach_bus(host); - mmc_release_host(host); - printk(KERN_ERR "%s: error %d whilst initialising SDIO card\n", + pr_err("%s: error %d whilst initialising SDIO card\n", mmc_hostname(host), err); return err; diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c index 2716c7ab6bb..4fa8fef9147 100644 --- a/drivers/mmc/core/sdio_bus.c +++ b/drivers/mmc/core/sdio_bus.c @@ -13,10 +13,13 @@ #include <linux/device.h> #include <linux/err.h> +#include <linux/export.h> #include <linux/slab.h> #include <linux/pm_runtime.h> +#include <linux/acpi.h> #include <linux/mmc/card.h> +#include <linux/mmc/host.h> #include <linux/mmc/sdio_func.h> #include "sdio_cis.h" @@ -31,7 +34,8 @@ field##_show(struct device *dev, struct device_attribute *attr, char *buf) \ \ func = dev_to_sdio_func (dev); \ return sprintf (buf, format_string, func->field); \ -} +} \ +static DEVICE_ATTR_RO(field) sdio_config_attr(class, "0x%02x\n"); sdio_config_attr(vendor, "0x%04x\n"); @@ -44,14 +48,16 @@ static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, return sprintf(buf, "sdio:c%02Xv%04Xd%04X\n", func->class, func->vendor, func->device); } - -static struct device_attribute sdio_dev_attrs[] = { - __ATTR_RO(class), - __ATTR_RO(vendor), - __ATTR_RO(device), - __ATTR_RO(modalias), - __ATTR_NULL, +static DEVICE_ATTR_RO(modalias); + +static struct attribute *sdio_dev_attrs[] = { + &dev_attr_class.attr, + &dev_attr_vendor.attr, + &dev_attr_device.attr, + &dev_attr_modalias.attr, + NULL, }; +ATTRIBUTE_GROUPS(sdio_dev); static const struct sdio_device_id *sdio_match_one(struct sdio_func *func, const struct sdio_device_id *id) @@ -132,9 +138,11 @@ static int sdio_bus_probe(struct device *dev) * it should call pm_runtime_put_noidle() in its probe routine and * pm_runtime_get_noresume() in its remove routine. */ - ret = pm_runtime_get_sync(dev); - if (ret < 0) - goto out; + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) { + ret = pm_runtime_get_sync(dev); + if (ret < 0) + goto disable_runtimepm; + } /* Set the default block size so the driver is sure it's something * sensible. */ @@ -151,8 +159,8 @@ static int sdio_bus_probe(struct device *dev) return 0; disable_runtimepm: - pm_runtime_put_noidle(dev); -out: + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_put_noidle(dev); return ret; } @@ -160,17 +168,16 @@ static int sdio_bus_remove(struct device *dev) { struct sdio_driver *drv = to_sdio_driver(dev->driver); struct sdio_func *func = dev_to_sdio_func(dev); - int ret; + int ret = 0; /* Make sure card is powered before invoking ->remove() */ - ret = pm_runtime_get_sync(dev); - if (ret < 0) - goto out; + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_get_sync(dev); drv->remove(func); if (func->irq_handler) { - printk(KERN_WARNING "WARNING: driver %s did not remove " + pr_warning("WARNING: driver %s did not remove " "its interrupt handler!\n", drv->name); sdio_claim_host(func); sdio_release_irq(func); @@ -178,65 +185,38 @@ static int sdio_bus_remove(struct device *dev) } /* First, undo the increment made directly above */ - pm_runtime_put_noidle(dev); + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_put_noidle(dev); /* Then undo the runtime PM settings in sdio_bus_probe() */ - pm_runtime_put_noidle(dev); + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_put_sync(dev); -out: return ret; } -#ifdef CONFIG_PM_RUNTIME - -static int sdio_bus_pm_prepare(struct device *dev) -{ - /* - * Resume an SDIO device which was suspended at run time at this - * point, in order to allow standard SDIO suspend/resume paths - * to keep working as usual. - * - * Ultimately, the SDIO driver itself will decide (in its - * suspend handler, or lack thereof) whether the card should be - * removed or kept, and if kept, at what power state. - * - * At this point, PM core have increased our use count, so it's - * safe to directly resume the device. After system is resumed - * again, PM core will drop back its runtime PM use count, and if - * needed device will be suspended again. - * - * The end result is guaranteed to be a power state that is - * coherent with the device's runtime PM use count. - * - * The return value of pm_runtime_resume is deliberately unchecked - * since there is little point in failing system suspend if a - * device can't be resumed. - */ - pm_runtime_resume(dev); - - return 0; -} +#ifdef CONFIG_PM static const struct dev_pm_ops sdio_bus_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm_generic_suspend, pm_generic_resume) SET_RUNTIME_PM_OPS( pm_generic_runtime_suspend, pm_generic_runtime_resume, - pm_generic_runtime_idle + NULL ) - .prepare = sdio_bus_pm_prepare, }; #define SDIO_PM_OPS_PTR (&sdio_bus_pm_ops) -#else /* !CONFIG_PM_RUNTIME */ +#else /* !CONFIG_PM */ #define SDIO_PM_OPS_PTR NULL -#endif /* !CONFIG_PM_RUNTIME */ +#endif /* !CONFIG_PM */ static struct bus_type sdio_bus_type = { .name = "sdio", - .dev_attrs = sdio_dev_attrs, + .dev_groups = sdio_dev_groups, .match = sdio_bus_match, .uevent = sdio_bus_uevent, .probe = sdio_bus_probe, @@ -283,8 +263,7 @@ static void sdio_release_func(struct device *dev) sdio_free_func_cis(func); - if (func->info) - kfree(func->info); + kfree(func->info); kfree(func); } @@ -311,6 +290,18 @@ struct sdio_func *sdio_alloc_func(struct mmc_card *card) return func; } +#ifdef CONFIG_ACPI +static void sdio_acpi_set_handle(struct sdio_func *func) +{ + struct mmc_host *host = func->card->host; + u64 addr = (host->slotno << 16) | func->num; + + acpi_preset_companion(&func->dev, ACPI_COMPANION(host->parent), addr); +} +#else +static inline void sdio_acpi_set_handle(struct sdio_func *func) {} +#endif + /* * Register a new SDIO function with the driver model. */ @@ -320,9 +311,12 @@ int sdio_add_func(struct sdio_func *func) dev_set_name(&func->dev, "%s:%d", mmc_card_id(func->card), func->num); + sdio_acpi_set_handle(func); ret = device_add(&func->dev); - if (ret == 0) + if (ret == 0) { sdio_func_set_present(func); + acpi_dev_pm_attach(&func->dev, false); + } return ret; } @@ -338,6 +332,7 @@ void sdio_remove_func(struct sdio_func *func) if (!sdio_func_present(func)) return; + acpi_dev_pm_detach(&func->dev, false); device_del(&func->dev); put_device(&func->dev); } diff --git a/drivers/mmc/core/sdio_cis.c b/drivers/mmc/core/sdio_cis.c index 541bdb89e0c..8e94e555b78 100644 --- a/drivers/mmc/core/sdio_cis.c +++ b/drivers/mmc/core/sdio_cis.c @@ -132,7 +132,7 @@ static int cis_tpl_parse(struct mmc_card *card, struct sdio_func *func, ret = -EINVAL; } if (ret && ret != -EILSEQ && ret != -ENOENT) { - printk(KERN_ERR "%s: bad %s tuple 0x%02x (%u bytes)\n", + pr_err("%s: bad %s tuple 0x%02x (%u bytes)\n", mmc_hostname(card->host), tpl_descr, code, size); } } else { @@ -313,7 +313,7 @@ static int sdio_read_cis(struct mmc_card *card, struct sdio_func *func) if (ret == -ENOENT) { /* warn about unknown tuples */ - printk(KERN_WARNING "%s: queuing unknown" + pr_warn_ratelimited("%s: queuing unknown" " CIS tuple 0x%02x (%u bytes)\n", mmc_hostname(card->host), tpl_code, tpl_link); diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c index 0f687cdeb06..78cb4d5d9d5 100644 --- a/drivers/mmc/core/sdio_io.c +++ b/drivers/mmc/core/sdio_io.c @@ -9,6 +9,7 @@ * your option) any later version. */ +#include <linux/export.h> #include <linux/mmc/host.h> #include <linux/mmc/card.h> #include <linux/mmc/sdio.h> @@ -187,14 +188,16 @@ EXPORT_SYMBOL_GPL(sdio_set_block_size); */ static inline unsigned int sdio_max_byte_size(struct sdio_func *func) { - unsigned mval = min(func->card->host->max_seg_size, - func->card->host->max_blk_size); + unsigned mval = func->card->host->max_blk_size; if (mmc_blksz_for_byte_mode(func->card)) mval = min(mval, func->cur_blksize); else mval = min(mval, func->max_blksize); + if (mmc_card_broken_byte_mode_512(func->card)) + return min(mval, 511u); + return min(mval, 512u); /* maximum size for byte mode */ } @@ -307,13 +310,10 @@ static int sdio_io_rw_ext_helper(struct sdio_func *func, int write, /* Do the bulk of the transfer using block mode (if supported). */ if (func->card->cccr.multi_block && (size > sdio_max_byte_size(func))) { /* Blocks per command is limited by host count, host transfer - * size (we only use a single sg entry) and the maximum for - * IO_RW_EXTENDED of 511 blocks. */ - max_blocks = min(func->card->host->max_blk_count, - func->card->host->max_seg_size / func->cur_blksize); - max_blocks = min(max_blocks, 511u); + * size and the maximum for IO_RW_EXTENDED of 511 blocks. */ + max_blocks = min(func->card->host->max_blk_count, 511u); - while (remainder > func->cur_blksize) { + while (remainder >= func->cur_blksize) { unsigned blocks; blocks = remainder / func->cur_blksize; @@ -338,8 +338,9 @@ static int sdio_io_rw_ext_helper(struct sdio_func *func, int write, while (remainder > 0) { size = min(remainder, sdio_max_byte_size(func)); + /* Indicate byte mode by setting "blocks" = 0 */ ret = mmc_io_rw_extended(func->card, write, func->num, addr, - incr_addr, buf, 1, size); + incr_addr, buf, 0, size); if (ret) return ret; diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c index bb192f90e8e..5cc13c8d35b 100644 --- a/drivers/mmc/core/sdio_irq.c +++ b/drivers/mmc/core/sdio_irq.c @@ -16,6 +16,7 @@ #include <linux/kernel.h> #include <linux/sched.h> #include <linux/kthread.h> +#include <linux/export.h> #include <linux/wait.h> #include <linux/delay.h> @@ -27,32 +28,56 @@ #include "sdio_ops.h" -static int process_sdio_pending_irqs(struct mmc_card *card) +static int process_sdio_pending_irqs(struct mmc_host *host) { + struct mmc_card *card = host->card; int i, ret, count; unsigned char pending; + struct sdio_func *func; + + /* + * Optimization, if there is only 1 function interrupt registered + * and we know an IRQ was signaled then call irq handler directly. + * Otherwise do the full probe. + */ + func = card->sdio_single_irq; + if (func && host->sdio_irq_pending) { + func->irq_handler(func); + return 1; + } ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_INTx, 0, &pending); if (ret) { - printk(KERN_DEBUG "%s: error %d reading SDIO_CCCR_INTx\n", + pr_debug("%s: error %d reading SDIO_CCCR_INTx\n", mmc_card_id(card), ret); return ret; } + if (pending && mmc_card_broken_irq_polling(card) && + !(host->caps & MMC_CAP_SDIO_IRQ)) { + unsigned char dummy; + + /* A fake interrupt could be created when we poll SDIO_CCCR_INTx + * register with a Marvell SD8797 card. A dummy CMD52 read to + * function 0 register 0xff can avoid this. + */ + mmc_io_rw_direct(card, 0, 0, 0xff, 0, &dummy); + } + count = 0; for (i = 1; i <= 7; i++) { if (pending & (1 << i)) { - struct sdio_func *func = card->sdio_func[i - 1]; + func = card->sdio_func[i - 1]; if (!func) { - printk(KERN_WARNING "%s: pending IRQ for " - "non-existant function\n", + pr_warning("%s: pending IRQ for " + "non-existent function\n", mmc_card_id(card)); ret = -EINVAL; } else if (func->irq_handler) { func->irq_handler(func); count++; } else { - printk(KERN_WARNING "%s: pending IRQ with no handler\n", + pr_warning("%s: pending IRQ with no handler\n", sdio_func_id(func)); ret = -EINVAL; } @@ -65,6 +90,15 @@ static int process_sdio_pending_irqs(struct mmc_card *card) return ret; } +void sdio_run_irqs(struct mmc_host *host) +{ + mmc_claim_host(host); + host->sdio_irq_pending = true; + process_sdio_pending_irqs(host); + mmc_release_host(host); +} +EXPORT_SYMBOL_GPL(sdio_run_irqs); + static int sdio_irq_thread(void *_host) { struct mmc_host *host = _host; @@ -104,7 +138,8 @@ static int sdio_irq_thread(void *_host) ret = __mmc_claim_host(host, &host->sdio_irq_thread_abort); if (ret) break; - ret = process_sdio_pending_irqs(host->card); + ret = process_sdio_pending_irqs(host); + host->sdio_irq_pending = false; mmc_release_host(host); /* @@ -134,15 +169,21 @@ static int sdio_irq_thread(void *_host) } set_current_state(TASK_INTERRUPTIBLE); - if (host->caps & MMC_CAP_SDIO_IRQ) + if (host->caps & MMC_CAP_SDIO_IRQ) { + mmc_host_clk_hold(host); host->ops->enable_sdio_irq(host, 1); + mmc_host_clk_release(host); + } if (!kthread_should_stop()) schedule_timeout(period); set_current_state(TASK_RUNNING); } while (!kthread_should_stop()); - if (host->caps & MMC_CAP_SDIO_IRQ) + if (host->caps & MMC_CAP_SDIO_IRQ) { + mmc_host_clk_hold(host); host->ops->enable_sdio_irq(host, 0); + mmc_host_clk_release(host); + } pr_debug("%s: IRQ thread exiting with code %d\n", mmc_hostname(host), ret); @@ -157,14 +198,20 @@ static int sdio_card_irq_get(struct mmc_card *card) WARN_ON(!host->claimed); if (!host->sdio_irqs++) { - atomic_set(&host->sdio_irq_thread_abort, 0); - host->sdio_irq_thread = - kthread_run(sdio_irq_thread, host, "ksdioirqd/%s", - mmc_hostname(host)); - if (IS_ERR(host->sdio_irq_thread)) { - int err = PTR_ERR(host->sdio_irq_thread); - host->sdio_irqs--; - return err; + if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD)) { + atomic_set(&host->sdio_irq_thread_abort, 0); + host->sdio_irq_thread = + kthread_run(sdio_irq_thread, host, + "ksdioirqd/%s", mmc_hostname(host)); + if (IS_ERR(host->sdio_irq_thread)) { + int err = PTR_ERR(host->sdio_irq_thread); + host->sdio_irqs--; + return err; + } + } else { + mmc_host_clk_hold(host); + host->ops->enable_sdio_irq(host, 1); + mmc_host_clk_release(host); } } @@ -179,13 +226,37 @@ static int sdio_card_irq_put(struct mmc_card *card) BUG_ON(host->sdio_irqs < 1); if (!--host->sdio_irqs) { - atomic_set(&host->sdio_irq_thread_abort, 1); - kthread_stop(host->sdio_irq_thread); + if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD)) { + atomic_set(&host->sdio_irq_thread_abort, 1); + kthread_stop(host->sdio_irq_thread); + } else { + mmc_host_clk_hold(host); + host->ops->enable_sdio_irq(host, 0); + mmc_host_clk_release(host); + } } return 0; } +/* If there is only 1 function registered set sdio_single_irq */ +static void sdio_single_irq_set(struct mmc_card *card) +{ + struct sdio_func *func; + int i; + + card->sdio_single_irq = NULL; + if ((card->host->caps & MMC_CAP_SDIO_IRQ) && + card->host->sdio_irqs == 1) + for (i = 0; i < card->sdio_funcs; i++) { + func = card->sdio_func[i]; + if (func && func->irq_handler) { + card->sdio_single_irq = func; + break; + } + } +} + /** * sdio_claim_irq - claim the IRQ for a SDIO function * @func: SDIO function @@ -227,6 +298,7 @@ int sdio_claim_irq(struct sdio_func *func, sdio_irq_handler_t *handler) ret = sdio_card_irq_get(func->card); if (ret) func->irq_handler = NULL; + sdio_single_irq_set(func->card); return ret; } @@ -251,6 +323,7 @@ int sdio_release_irq(struct sdio_func *func) if (func->irq_handler) { func->irq_handler = NULL; sdio_card_irq_put(func->card); + sdio_single_irq_set(func->card); } ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IENx, 0, ®); diff --git a/drivers/mmc/core/sdio_ops.c b/drivers/mmc/core/sdio_ops.c index dea36d9c22e..62508b457c4 100644 --- a/drivers/mmc/core/sdio_ops.c +++ b/drivers/mmc/core/sdio_ops.c @@ -21,13 +21,11 @@ int mmc_send_io_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr) { - struct mmc_command cmd; + struct mmc_command cmd = {0}; int i, err = 0; BUG_ON(!host); - memset(&cmd, 0, sizeof(struct mmc_command)); - cmd.opcode = SD_IO_SEND_OP_COND; cmd.arg = ocr; cmd.flags = MMC_RSP_SPI_R4 | MMC_RSP_R4 | MMC_CMD_BCR; @@ -70,7 +68,7 @@ int mmc_send_io_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr) static int mmc_io_rw_direct_host(struct mmc_host *host, int write, unsigned fn, unsigned addr, u8 in, u8 *out) { - struct mmc_command cmd; + struct mmc_command cmd = {0}; int err; BUG_ON(!host); @@ -80,8 +78,6 @@ static int mmc_io_rw_direct_host(struct mmc_host *host, int write, unsigned fn, if (addr & ~0x1FFFF) return -EINVAL; - memset(&cmd, 0, sizeof(struct mmc_command)); - cmd.opcode = SD_IO_RW_DIRECT; cmd.arg = write ? 0x80000000 : 0x00000000; cmd.arg |= fn << 28; @@ -125,25 +121,22 @@ int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn, int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn, unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz) { - struct mmc_request mrq; - struct mmc_command cmd; - struct mmc_data data; - struct scatterlist sg; + struct mmc_request mrq = {NULL}; + struct mmc_command cmd = {0}; + struct mmc_data data = {0}; + struct scatterlist sg, *sg_ptr; + struct sg_table sgtable; + unsigned int nents, left_size, i; + unsigned int seg_size = card->host->max_seg_size; BUG_ON(!card); BUG_ON(fn > 7); - BUG_ON(blocks == 1 && blksz > 512); - WARN_ON(blocks == 0); WARN_ON(blksz == 0); /* sanity check */ if (addr & ~0x1FFFF) return -EINVAL; - memset(&mrq, 0, sizeof(struct mmc_request)); - memset(&cmd, 0, sizeof(struct mmc_command)); - memset(&data, 0, sizeof(struct mmc_data)); - mrq.cmd = &cmd; mrq.data = &data; @@ -152,24 +145,46 @@ int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn, cmd.arg |= fn << 28; cmd.arg |= incr_addr ? 0x04000000 : 0x00000000; cmd.arg |= addr << 9; - if (blocks == 1 && blksz <= 512) + if (blocks == 0) cmd.arg |= (blksz == 512) ? 0 : blksz; /* byte mode */ else cmd.arg |= 0x08000000 | blocks; /* block mode */ cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_ADTC; data.blksz = blksz; - data.blocks = blocks; + /* Code in host drivers/fwk assumes that "blocks" always is >=1 */ + data.blocks = blocks ? blocks : 1; data.flags = write ? MMC_DATA_WRITE : MMC_DATA_READ; - data.sg = &sg; - data.sg_len = 1; - sg_init_one(&sg, buf, blksz * blocks); + left_size = data.blksz * data.blocks; + nents = (left_size - 1) / seg_size + 1; + if (nents > 1) { + if (sg_alloc_table(&sgtable, nents, GFP_KERNEL)) + return -ENOMEM; + + data.sg = sgtable.sgl; + data.sg_len = nents; + + for_each_sg(data.sg, sg_ptr, data.sg_len, i) { + sg_set_page(sg_ptr, virt_to_page(buf + (i * seg_size)), + min(seg_size, left_size), + offset_in_page(buf + (i * seg_size))); + left_size = left_size - seg_size; + } + } else { + data.sg = &sg; + data.sg_len = 1; + + sg_init_one(&sg, buf, left_size); + } mmc_set_data_timeout(&data, card); mmc_wait_for_req(card->host, &mrq); + if (nents > 1) + sg_free_table(&sgtable); + if (cmd.error) return cmd.error; if (data.error) diff --git a/drivers/mmc/core/slot-gpio.c b/drivers/mmc/core/slot-gpio.c new file mode 100644 index 00000000000..5f89cb83d5f --- /dev/null +++ b/drivers/mmc/core/slot-gpio.c @@ -0,0 +1,355 @@ +/* + * Generic GPIO card-detect helper + * + * Copyright (C) 2011, Guennadi Liakhovetski <g.liakhovetski@gmx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/gpio.h> +#include <linux/gpio/consumer.h> +#include <linux/interrupt.h> +#include <linux/jiffies.h> +#include <linux/mmc/host.h> +#include <linux/mmc/slot-gpio.h> +#include <linux/module.h> +#include <linux/slab.h> + +struct mmc_gpio { + struct gpio_desc *ro_gpio; + struct gpio_desc *cd_gpio; + bool override_ro_active_level; + bool override_cd_active_level; + char *ro_label; + char cd_label[0]; +}; + +static irqreturn_t mmc_gpio_cd_irqt(int irq, void *dev_id) +{ + /* Schedule a card detection after a debounce timeout */ + struct mmc_host *host = dev_id; + + host->trigger_card_event = true; + mmc_detect_change(host, msecs_to_jiffies(200)); + + return IRQ_HANDLED; +} + +static int mmc_gpio_alloc(struct mmc_host *host) +{ + size_t len = strlen(dev_name(host->parent)) + 4; + struct mmc_gpio *ctx; + + mutex_lock(&host->slot.lock); + + ctx = host->slot.handler_priv; + if (!ctx) { + /* + * devm_kzalloc() can be called after device_initialize(), even + * before device_add(), i.e., between mmc_alloc_host() and + * mmc_add_host() + */ + ctx = devm_kzalloc(&host->class_dev, sizeof(*ctx) + 2 * len, + GFP_KERNEL); + if (ctx) { + ctx->ro_label = ctx->cd_label + len; + snprintf(ctx->cd_label, len, "%s cd", dev_name(host->parent)); + snprintf(ctx->ro_label, len, "%s ro", dev_name(host->parent)); + host->slot.handler_priv = ctx; + } + } + + mutex_unlock(&host->slot.lock); + + return ctx ? 0 : -ENOMEM; +} + +int mmc_gpio_get_ro(struct mmc_host *host) +{ + struct mmc_gpio *ctx = host->slot.handler_priv; + + if (!ctx || !ctx->ro_gpio) + return -ENOSYS; + + if (ctx->override_ro_active_level) + return !gpiod_get_raw_value_cansleep(ctx->ro_gpio) ^ + !!(host->caps2 & MMC_CAP2_RO_ACTIVE_HIGH); + + return gpiod_get_value_cansleep(ctx->ro_gpio); +} +EXPORT_SYMBOL(mmc_gpio_get_ro); + +int mmc_gpio_get_cd(struct mmc_host *host) +{ + struct mmc_gpio *ctx = host->slot.handler_priv; + + if (!ctx || !ctx->cd_gpio) + return -ENOSYS; + + if (ctx->override_cd_active_level) + return !gpiod_get_raw_value_cansleep(ctx->cd_gpio) ^ + !!(host->caps2 & MMC_CAP2_CD_ACTIVE_HIGH); + + return gpiod_get_value_cansleep(ctx->cd_gpio); +} +EXPORT_SYMBOL(mmc_gpio_get_cd); + +/** + * mmc_gpio_request_ro - request a gpio for write-protection + * @host: mmc host + * @gpio: gpio number requested + * + * As devm_* managed functions are used in mmc_gpio_request_ro(), client + * drivers do not need to explicitly call mmc_gpio_free_ro() for freeing up, + * if the requesting and freeing are only needed at probing and unbinding time + * for once. However, if client drivers do something special like runtime + * switching for write-protection, they are responsible for calling + * mmc_gpio_request_ro() and mmc_gpio_free_ro() as a pair on their own. + * + * Returns zero on success, else an error. + */ +int mmc_gpio_request_ro(struct mmc_host *host, unsigned int gpio) +{ + struct mmc_gpio *ctx; + int ret; + + if (!gpio_is_valid(gpio)) + return -EINVAL; + + ret = mmc_gpio_alloc(host); + if (ret < 0) + return ret; + + ctx = host->slot.handler_priv; + + ret = devm_gpio_request_one(&host->class_dev, gpio, GPIOF_DIR_IN, + ctx->ro_label); + if (ret < 0) + return ret; + + ctx->override_ro_active_level = true; + ctx->ro_gpio = gpio_to_desc(gpio); + + return 0; +} +EXPORT_SYMBOL(mmc_gpio_request_ro); + +void mmc_gpiod_request_cd_irq(struct mmc_host *host) +{ + struct mmc_gpio *ctx = host->slot.handler_priv; + int ret, irq; + + if (host->slot.cd_irq >= 0 || !ctx || !ctx->cd_gpio) + return; + + irq = gpiod_to_irq(ctx->cd_gpio); + + /* + * Even if gpiod_to_irq() returns a valid IRQ number, the platform might + * still prefer to poll, e.g., because that IRQ number is already used + * by another unit and cannot be shared. + */ + if (irq >= 0 && host->caps & MMC_CAP_NEEDS_POLL) + irq = -EINVAL; + + if (irq >= 0) { + ret = devm_request_threaded_irq(&host->class_dev, irq, + NULL, mmc_gpio_cd_irqt, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + ctx->cd_label, host); + if (ret < 0) + irq = ret; + } + + host->slot.cd_irq = irq; + + if (irq < 0) + host->caps |= MMC_CAP_NEEDS_POLL; +} +EXPORT_SYMBOL(mmc_gpiod_request_cd_irq); + +/** + * mmc_gpio_request_cd - request a gpio for card-detection + * @host: mmc host + * @gpio: gpio number requested + * @debounce: debounce time in microseconds + * + * As devm_* managed functions are used in mmc_gpio_request_cd(), client + * drivers do not need to explicitly call mmc_gpio_free_cd() for freeing up, + * if the requesting and freeing are only needed at probing and unbinding time + * for once. However, if client drivers do something special like runtime + * switching for card-detection, they are responsible for calling + * mmc_gpio_request_cd() and mmc_gpio_free_cd() as a pair on their own. + * + * If GPIO debouncing is desired, set the debounce parameter to a non-zero + * value. The caller is responsible for ensuring that the GPIO driver associated + * with the GPIO supports debouncing, otherwise an error will be returned. + * + * Returns zero on success, else an error. + */ +int mmc_gpio_request_cd(struct mmc_host *host, unsigned int gpio, + unsigned int debounce) +{ + struct mmc_gpio *ctx; + int ret; + + ret = mmc_gpio_alloc(host); + if (ret < 0) + return ret; + + ctx = host->slot.handler_priv; + + ret = devm_gpio_request_one(&host->class_dev, gpio, GPIOF_DIR_IN, + ctx->cd_label); + if (ret < 0) + /* + * don't bother freeing memory. It might still get used by other + * slot functions, in any case it will be freed, when the device + * is destroyed. + */ + return ret; + + if (debounce) { + ret = gpio_set_debounce(gpio, debounce); + if (ret < 0) + return ret; + } + + ctx->override_cd_active_level = true; + ctx->cd_gpio = gpio_to_desc(gpio); + + mmc_gpiod_request_cd_irq(host); + + return 0; +} +EXPORT_SYMBOL(mmc_gpio_request_cd); + +/** + * mmc_gpio_free_ro - free the write-protection gpio + * @host: mmc host + * + * It's provided only for cases that client drivers need to manually free + * up the write-protection gpio requested by mmc_gpio_request_ro(). + */ +void mmc_gpio_free_ro(struct mmc_host *host) +{ + struct mmc_gpio *ctx = host->slot.handler_priv; + int gpio; + + if (!ctx || !ctx->ro_gpio) + return; + + gpio = desc_to_gpio(ctx->ro_gpio); + ctx->ro_gpio = NULL; + + devm_gpio_free(&host->class_dev, gpio); +} +EXPORT_SYMBOL(mmc_gpio_free_ro); + +/** + * mmc_gpio_free_cd - free the card-detection gpio + * @host: mmc host + * + * It's provided only for cases that client drivers need to manually free + * up the card-detection gpio requested by mmc_gpio_request_cd(). + */ +void mmc_gpio_free_cd(struct mmc_host *host) +{ + struct mmc_gpio *ctx = host->slot.handler_priv; + int gpio; + + if (!ctx || !ctx->cd_gpio) + return; + + if (host->slot.cd_irq >= 0) { + devm_free_irq(&host->class_dev, host->slot.cd_irq, host); + host->slot.cd_irq = -EINVAL; + } + + gpio = desc_to_gpio(ctx->cd_gpio); + ctx->cd_gpio = NULL; + + devm_gpio_free(&host->class_dev, gpio); +} +EXPORT_SYMBOL(mmc_gpio_free_cd); + +/** + * mmc_gpiod_request_cd - request a gpio descriptor for card-detection + * @host: mmc host + * @con_id: function within the GPIO consumer + * @idx: index of the GPIO to obtain in the consumer + * @override_active_level: ignore %GPIO_ACTIVE_LOW flag + * @debounce: debounce time in microseconds + * + * Use this function in place of mmc_gpio_request_cd() to use the GPIO + * descriptor API. Note that it is paired with mmc_gpiod_free_cd() not + * mmc_gpio_free_cd(). Note also that it must be called prior to mmc_add_host() + * otherwise the caller must also call mmc_gpiod_request_cd_irq(). + * + * Returns zero on success, else an error. + */ +int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id, + unsigned int idx, bool override_active_level, + unsigned int debounce) +{ + struct mmc_gpio *ctx; + struct gpio_desc *desc; + int ret; + + ret = mmc_gpio_alloc(host); + if (ret < 0) + return ret; + + ctx = host->slot.handler_priv; + + if (!con_id) + con_id = ctx->cd_label; + + desc = devm_gpiod_get_index(host->parent, con_id, idx); + if (IS_ERR(desc)) + return PTR_ERR(desc); + + ret = gpiod_direction_input(desc); + if (ret < 0) + return ret; + + if (debounce) { + ret = gpiod_set_debounce(desc, debounce); + if (ret < 0) + return ret; + } + + ctx->override_cd_active_level = override_active_level; + ctx->cd_gpio = desc; + + return 0; +} +EXPORT_SYMBOL(mmc_gpiod_request_cd); + +/** + * mmc_gpiod_free_cd - free the card-detection gpio descriptor + * @host: mmc host + * + * It's provided only for cases that client drivers need to manually free + * up the card-detection gpio requested by mmc_gpiod_request_cd(). + */ +void mmc_gpiod_free_cd(struct mmc_host *host) +{ + struct mmc_gpio *ctx = host->slot.handler_priv; + + if (!ctx || !ctx->cd_gpio) + return; + + if (host->slot.cd_irq >= 0) { + devm_free_irq(&host->class_dev, host->slot.cd_irq, host); + host->slot.cd_irq = -EINVAL; + } + + devm_gpiod_put(&host->class_dev, ctx->cd_gpio); + + ctx->cd_gpio = NULL; +} +EXPORT_SYMBOL(mmc_gpiod_free_cd); diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index d618e867399..a5652548230 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -69,7 +69,7 @@ config MMC_SDHCI_PCI If unsure, say N. config MMC_RICOH_MMC - bool "Ricoh MMC Controller Disabler (EXPERIMENTAL)" + bool "Ricoh MMC Controller Disabler" depends on MMC_SDHCI_PCI help This adds a pci quirk to disable Ricoh MMC Controller. This @@ -81,62 +81,112 @@ config MMC_RICOH_MMC If unsure, say Y. -config MMC_SDHCI_OF - tristate "SDHCI support on OpenFirmware platforms" - depends on MMC_SDHCI && PPC_OF +config MMC_SDHCI_ACPI + tristate "SDHCI support for ACPI enumerated SDHCI controllers" + depends on MMC_SDHCI && ACPI help - This selects the OF support for Secure Digital Host Controller - Interfaces. + This selects support for ACPI enumerated SDHCI controllers, + identified by ACPI Compatibility ID PNP0D40 or specific + ACPI Hardware IDs. + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + +config MMC_SDHCI_PLTFM + tristate "SDHCI platform and OF driver helper" + depends on MMC_SDHCI + help + This selects the common helper functions support for Secure Digital + Host Controller Interface based platform and OF drivers. + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + +config MMC_SDHCI_OF_ARASAN + tristate "SDHCI OF support for the Arasan SDHCI controllers" + depends on MMC_SDHCI_PLTFM + depends on OF + help + This selects the Arasan Secure Digital Host Controller Interface + (SDHCI). This hardware is found e.g. in Xilinx' Zynq SoC. + + If you have a controller with this interface, say Y or M here. If unsure, say N. config MMC_SDHCI_OF_ESDHC - bool "SDHCI OF support for the Freescale eSDHC controller" - depends on MMC_SDHCI_OF + tristate "SDHCI OF support for the Freescale eSDHC controller" + depends on MMC_SDHCI_PLTFM + depends on PPC_OF select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER help This selects the Freescale eSDHC controller support. + If you have a controller with this interface, say Y or M here. + If unsure, say N. config MMC_SDHCI_OF_HLWD - bool "SDHCI OF support for the Nintendo Wii SDHCI controllers" - depends on MMC_SDHCI_OF + tristate "SDHCI OF support for the Nintendo Wii SDHCI controllers" + depends on MMC_SDHCI_PLTFM + depends on PPC_OF select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER help This selects the Secure Digital Host Controller Interface (SDHCI) found in the "Hollywood" chipset of the Nintendo Wii video game console. - If unsure, say N. - -config MMC_SDHCI_PLTFM - tristate "SDHCI support on the platform specific bus" - depends on MMC_SDHCI - help - This selects the platform specific bus support for Secure Digital Host - Controller Interface. - If you have a controller with this interface, say Y or M here. If unsure, say N. config MMC_SDHCI_CNS3XXX - bool "SDHCI support on the Cavium Networks CNS3xxx SoC" + tristate "SDHCI support on the Cavium Networks CNS3xxx SoC" depends on ARCH_CNS3XXX depends on MMC_SDHCI_PLTFM help This selects the SDHCI support for CNS3xxx System-on-Chip devices. + If you have a controller with this interface, say Y or M here. + If unsure, say N. config MMC_SDHCI_ESDHC_IMX - bool "SDHCI platform support for the Freescale eSDHC i.MX controller" - depends on MMC_SDHCI_PLTFM && (ARCH_MX25 || ARCH_MX35 || ARCH_MX5) + tristate "SDHCI support for the Freescale eSDHC/uSDHC i.MX controller" + depends on ARCH_MXC + depends on MMC_SDHCI_PLTFM select MMC_SDHCI_IO_ACCESSORS help - This selects the Freescale eSDHC controller support on the platform - bus, found on platforms like mx35/51. + This selects the Freescale eSDHC/uSDHC controller support + found on i.MX25, i.MX35 i.MX5x and i.MX6x. + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + +config MMC_SDHCI_DOVE + tristate "SDHCI support on Marvell's Dove SoC" + depends on ARCH_DOVE || MACH_DOVE + depends on MMC_SDHCI_PLTFM + select MMC_SDHCI_IO_ACCESSORS + help + This selects the Secure Digital Host Controller Interface in + Marvell's Dove SoC. + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + +config MMC_SDHCI_TEGRA + tristate "SDHCI platform support for the Tegra SD/MMC Controller" + depends on ARCH_TEGRA + depends on MMC_SDHCI_PLTFM + select MMC_SDHCI_IO_ACCESSORS + help + This selects the Tegra SD/MMC controller. If you have a Tegra + platform with SD or MMC devices, say Y or M here. If unsure, say N. @@ -148,21 +198,41 @@ config MMC_SDHCI_S3C often referrered to as the HSMMC block in some of the Samsung S3C range of SoC. - Note, due to the problems with DMA, the DMA support is only - available with CONFIG_EXPERIMENTAL is selected. + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + +config MMC_SDHCI_SIRF + tristate "SDHCI support on CSR SiRFprimaII and SiRFmarco SoCs" + depends on ARCH_SIRF + depends on MMC_SDHCI_PLTFM + help + This selects the SDHCI support for SiRF System-on-Chip devices. If you have a controller with this interface, say Y or M here. If unsure, say N. -config MMC_SDHCI_PXA - tristate "Marvell PXA168/PXA910/MMP2 SD Host Controller support" - depends on ARCH_PXA || ARCH_MMP - select MMC_SDHCI - select MMC_SDHCI_IO_ACCESSORS +config MMC_SDHCI_PXAV3 + tristate "Marvell MMP2 SD Host Controller support (PXAV3)" + depends on CLKDEV_LOOKUP + depends on MMC_SDHCI_PLTFM + default CPU_MMP2 help - This selects the Marvell(R) PXA168/PXA910/MMP2 SD Host Controller. - If you have a PXA168/PXA910/MMP2 platform with SD Host Controller + This selects the Marvell(R) PXAV3 SD Host Controller. + If you have a MMP2 platform with SD Host Controller + and a card slot, say Y or M here. + + If unsure, say N. + +config MMC_SDHCI_PXAV2 + tristate "Marvell PXA9XX SD Host Controller support (PXAV2)" + depends on CLKDEV_LOOKUP + depends on MMC_SDHCI_PLTFM + default CPU_PXA910 + help + This selects the Marvell(R) PXAV2 SD Host Controller. + If you have a PXA9XX platform with SD Host Controller and a card slot, say Y or M here. If unsure, say N. @@ -181,7 +251,7 @@ config MMC_SDHCI_SPEAR config MMC_SDHCI_S3C_DMA bool "DMA support on S3C SDHCI" - depends on MMC_SDHCI_S3C && EXPERIMENTAL + depends on MMC_SDHCI_S3C help Enable DMA support on the Samsung S3C SDHCI glue. The DMA has proved to be problematic if the controller encounters @@ -189,10 +259,41 @@ config MMC_SDHCI_S3C_DMA YMMV. +config MMC_SDHCI_BCM_KONA + tristate "SDHCI support on Broadcom KONA platform" + depends on ARCH_BCM_MOBILE + depends on MMC_SDHCI_PLTFM + help + This selects the Broadcom Kona Secure Digital Host Controller + Interface(SDHCI) support. + This is used in Broadcom mobile SoCs. + + If you have a controller with this interface, say Y or M here. + +config MMC_SDHCI_BCM2835 + tristate "SDHCI platform support for the BCM2835 SD/MMC Controller" + depends on ARCH_BCM2835 + depends on MMC_SDHCI_PLTFM + select MMC_SDHCI_IO_ACCESSORS + help + This selects the BCM2835 SD/MMC controller. If you have a BCM2835 + platform with SD or MMC devices, say Y or M here. + + If unsure, say N. + +config MMC_MOXART + tristate "MOXART SD/MMC Host Controller support" + depends on ARCH_MOXART && MMC + help + This selects support for the MOXART SD/MMC Host Controller. + MOXA provides one multi-functional card reader which can + be found on some embedded hardware such as UC-7112-LX. + If you have a controller with this interface, say Y here. + config MMC_OMAP tristate "TI OMAP Multimedia Card Interface support" depends on ARCH_OMAP - select TPS65010 if MACH_OMAP_H2 + depends on TPS65010 || !MACH_OMAP_H2 help This selects the TI OMAP Multimedia card Interface. If you have an OMAP board with a Multimedia Card slot, @@ -202,11 +303,11 @@ config MMC_OMAP config MMC_OMAP_HS tristate "TI OMAP High Speed Multimedia Card Interface support" - depends on ARCH_OMAP2430 || ARCH_OMAP3 || ARCH_OMAP4 + depends on ARCH_OMAP2PLUS || COMPILE_TEST help This selects the TI OMAP High Speed Multimedia card Interface. - If you have an OMAP2430 or OMAP3 board or OMAP4 board with a - Multimedia Card slot, say Y or M here. + If you have an omap2plus board with a Multimedia Card slot, + say Y or M here. If unsure, say N. @@ -223,30 +324,15 @@ config MMC_WBSD config MMC_AU1X tristate "Alchemy AU1XX0 MMC Card Interface support" - depends on SOC_AU1200 + depends on MIPS_ALCHEMY help This selects the AMD Alchemy(R) Multimedia card interface. If you have a Alchemy platform with a MMC slot, say Y or M here. If unsure, say N. -choice - prompt "Atmel SD/MMC Driver" - depends on AVR32 || ARCH_AT91 - default MMC_ATMELMCI if AVR32 - help - Choose which driver to use for the Atmel MCI Silicon - -config MMC_AT91 - tristate "AT91 SD/MMC Card Interface support" - depends on ARCH_AT91 - help - This selects the AT91 MCI controller. - - If unsure, say N. - config MMC_ATMELMCI - tristate "Atmel Multimedia Card Interface support" + tristate "Atmel SD/MMC Driver (Multimedia Card Interface)" depends on AVR32 || ARCH_AT91 help This selects the Atmel Multimedia Card Interface driver. If @@ -255,50 +341,49 @@ config MMC_ATMELMCI If unsure, say N. -endchoice - -config MMC_ATMELMCI_DMA - bool "Atmel MCI DMA support (EXPERIMENTAL)" - depends on MMC_ATMELMCI && (AVR32 || ARCH_AT91SAM9G45) && DMA_ENGINE && EXPERIMENTAL +config MMC_SDHCI_MSM + tristate "Qualcomm SDHCI Controller Support" + depends on ARCH_QCOM + depends on MMC_SDHCI_PLTFM help - Say Y here to have the Atmel MCI driver use a DMA engine to - do data transfers and thus increase the throughput and - reduce the CPU utilization. Note that this is highly - experimental and may cause the driver to lock up. - - If unsure, say N. + This selects the Secure Digital Host Controller Interface (SDHCI) + support present in Qualcomm SOCs. The controller supports + SD/MMC/SDIO devices. -config MMC_IMX - tristate "Motorola i.MX Multimedia Card Interface support" - depends on ARCH_MX1 - help - This selects the Motorola i.MX Multimedia card Interface. - If you have a i.MX platform with a Multimedia Card slot, - say Y or M here. + If you have a controller with this interface, say Y or M here. If unsure, say N. config MMC_MSM tristate "Qualcomm SDCC Controller Support" - depends on MMC && ARCH_MSM + depends on MMC && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50) help This provides support for the SD/MMC cell found in the MSM and QSD SOCs from Qualcomm. The controller also has support for SDIO devices. config MMC_MXC - tristate "Freescale i.MX2/3 Multimedia Card Interface support" - depends on ARCH_MXC + tristate "Freescale i.MX21/27/31 or MPC512x Multimedia Card support" + depends on ARCH_MXC || PPC_MPC512x help - This selects the Freescale i.MX2/3 Multimedia card Interface. - If you have a i.MX platform with a Multimedia Card slot, - say Y or M here. + This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x + Multimedia Card Interface. If you have an i.MX or MPC512x platform + with a Multimedia Card slot, say Y or M here. + + If unsure, say N. + +config MMC_MXS + tristate "Freescale MXS Multimedia Card Interface support" + depends on ARCH_MXS && MXS_DMA + help + This selects the Freescale SSP MMC controller found on MXS based + platforms like mx23/28. If unsure, say N. config MMC_TIFM_SD - tristate "TI Flash Media MMC/SD Interface support (EXPERIMENTAL)" - depends on EXPERIMENTAL && PCI + tristate "TI Flash Media MMC/SD Interface support" + depends on PCI select TIFM_CORE help Say Y here if you want to be able to access MMC/SD cards with @@ -331,6 +416,13 @@ config MMC_DAVINCI If you have an DAVINCI board with a Multimedia Card slot, say Y or M here. If unsure, say N. +config MMC_GOLDFISH + tristate "goldfish qemu Multimedia Card Interface support" + depends on GOLDFISH + help + This selects the Goldfish Multimedia card Interface emulation + found on the Goldfish Android virtual device emulation. + config MMC_SPI tristate "MMC/SD/SDIO over SPI" depends on SPI_MASTER && !HIGHMEM && HAS_DMA @@ -347,7 +439,7 @@ config MMC_SPI config MMC_S3C tristate "Samsung S3C SD/MMC Card Interface support" - depends on ARCH_S3C2410 + depends on ARCH_S3C24XX help This selects a driver for the MCI interface found in Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs. @@ -377,8 +469,7 @@ config MMC_S3C_PIO the S3C MCI driver. config MMC_S3C_DMA - bool "Use DMA transfers only (EXPERIMENTAL)" - depends on EXPERIMENTAL + bool "Use DMA transfers only" help Use DMA to transfer data between memory and the hardare. @@ -387,7 +478,7 @@ config MMC_S3C_DMA option is useful. config MMC_S3C_PIODMA - bool "Support for both PIO and DMA (EXPERIMENTAL)" + bool "Support for both PIO and DMA" help Compile both the PIO and DMA transfer routines into the driver and let the platform select at run-time which one @@ -398,8 +489,8 @@ config MMC_S3C_PIODMA endchoice config MMC_SDRICOH_CS - tristate "MMC/SD driver for Ricoh Bay1Controllers (EXPERIMENTAL)" - depends on EXPERIMENTAL && PCI && PCMCIA + tristate "MMC/SD driver for Ricoh Bay1Controllers" + depends on PCI && PCMCIA help Say Y here if your Notebook reports a Ricoh Bay1Controller PCMCIA card whenever you insert a MMC or SD card into the card slot. @@ -407,17 +498,29 @@ config MMC_SDRICOH_CS To compile this driver as a module, choose M here: the module will be called sdricoh_cs. +config MMC_TMIO_CORE + tristate + config MMC_TMIO tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support" - depends on MFD_TMIO || MFD_ASIC3 || MFD_SH_MOBILE_SDHI + depends on MFD_TMIO || MFD_ASIC3 + select MMC_TMIO_CORE help This provides support for the SD/MMC cell found in TC6393XB, T7L66XB and also HTC ASIC3 +config MMC_SDHI + tristate "SH-Mobile SDHI SD/SDIO controller support" + depends on SUPERH || ARM + depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST + select MMC_TMIO_CORE + help + This provides support for the SDHI SD/SDIO controller found in + SuperH and ARM SH-Mobile SoCs + config MMC_CB710 tristate "ENE CB710 MMC/SD Interface support" depends on PCI - select MISC_DEVICES select CB710_CORE help This option enables support for MMC/SD part of ENE CB710/720 Flash @@ -458,11 +561,72 @@ config SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND help If you say yes here SD-Cards may work on the EZkit. +config MMC_DW + tristate "Synopsys DesignWare Memory Card Interface" + depends on ARC || ARM + help + This selects support for the Synopsys DesignWare Mobile Storage IP + block, this provides host support for SD and MMC interfaces, in both + PIO and external DMA modes. + +config MMC_DW_IDMAC + bool "Internal DMAC interface" + depends on MMC_DW + help + This selects support for the internal DMAC block within the Synopsys + Designware Mobile Storage IP block. This disables the external DMA + interface. + +config MMC_DW_PLTFM + tristate "Synopsys Designware MCI Support as platform device" + depends on MMC_DW + default y + help + This selects the common helper functions support for Host Controller + Interface based platform driver. Please select this option if the IP + is present as a platform device. This is the common interface for the + Synopsys Designware IP. + + If you have a controller with this interface, say Y or M here. + + If unsure, say Y. + +config MMC_DW_EXYNOS + tristate "Exynos specific extensions for Synopsys DW Memory Card Interface" + depends on MMC_DW + select MMC_DW_PLTFM + help + This selects support for Samsung Exynos SoC specific extensions to the + Synopsys DesignWare Memory Card Interface driver. Select this option + for platforms based on Exynos4 and Exynos5 SoC's. + +config MMC_DW_K3 + tristate "K3 specific extensions for Synopsys DW Memory Card Interface" + depends on MMC_DW + select MMC_DW_PLTFM + select MMC_DW_IDMAC + help + This selects support for Hisilicon K3 SoC specific extensions to the + Synopsys DesignWare Memory Card Interface driver. Select this option + for platforms based on Hisilicon K3 SoC's. + +config MMC_DW_PCI + tristate "Synopsys Designware MCI support on PCI bus" + depends on MMC_DW && PCI + help + This selects the PCI bus for the Synopsys Designware Mobile Storage IP. + Select this option if the IP is present on PCI platform. + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + config MMC_SH_MMCIF tristate "SuperH Internal MMCIF support" - depends on MMC_BLOCK && (SUPERH || ARCH_SHMOBILE) + depends on MMC_BLOCK + depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST help - This selects the MMC Host Interface controler (MMCIF). + This selects the MMC Host Interface controller (MMCIF). This driver supports MMCIF in sh7724/sh7757/sh7372. @@ -475,6 +639,37 @@ config MMC_JZ4740 If you have a board based on such a SoC and with a SD/MMC slot, say Y or M here. +config MMC_VUB300 + tristate "VUB300 USB to SDIO/SD/MMC Host Controller support" + depends on USB + help + This selects support for Elan Digital Systems' VUB300 chip. + + The VUB300 is a USB-SDIO Host Controller Interface chip + that enables the host computer to use SDIO/SD/MMC cards + via a USB 2.0 or USB 1.1 host. + + The VUB300 chip will be found in both physically separate + USB to SDIO/SD/MMC adapters and embedded on some motherboards. + + The VUB300 chip supports SD and MMC memory cards in addition + to single and multifunction SDIO cards. + + Some SDIO cards will need a firmware file to be loaded and + sent to VUB300 chip in order to achieve better data throughput. + Download these "Offload Pseudocode" from Elan Digital Systems' + web-site http://www.elandigitalsystems.com/support/downloads.php + and put them in /lib/firmware. Note that without these additional + firmware files the VUB300 chip will still function, but not at + the best obtainable data rate. + + To compile this mmc host controller driver as a module, + choose M here: the module will be called vub300. + + If you have a computer with an embedded VUB300 chip + or if you intend connecting a USB adapter based on a + VUB300 chip say Y or M here. + config MMC_USHC tristate "USB SD Host Controller (USHC) support" depends on USB @@ -488,3 +683,41 @@ config MMC_USHC Note: These controllers only support SDIO cards and do not support MMC or SD memory cards. + +config MMC_WMT + tristate "Wondermedia SD/MMC Host Controller support" + depends on ARCH_VT8500 + default y + help + This selects support for the SD/MMC Host Controller on + Wondermedia WM8505/WM8650 based SoCs. + + To compile this driver as a module, choose M here: the + module will be called wmt-sdmmc. + +config MMC_USDHI6ROL0 + tristate "Renesas USDHI6ROL0 SD/SDIO Host Controller support" + help + This selects support for the Renesas USDHI6ROL0 SD/SDIO + Host Controller + +config MMC_REALTEK_PCI + tristate "Realtek PCI-E SD/MMC Card Interface Driver" + depends on MFD_RTSX_PCI + help + Say Y here to include driver code to support SD/MMC card interface + of Realtek PCI-E card reader + +config MMC_REALTEK_USB + tristate "Realtek USB SD/MMC Card Interface Driver" + depends on MFD_RTSX_USB + help + Say Y here to include driver code to support SD/MMC card interface + of Realtek RTS5129/39 series card reader + +config MMC_SUNXI + tristate "Allwinner sunxi SD/MMC Host Controller support" + depends on ARCH_SUNXI + help + This selects support for the SD/MMC Host Controller on + Allwinner sunxi SoCs. diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 7b645ff43b3..7f81ddf1dd2 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -4,23 +4,28 @@ obj-$(CONFIG_MMC_ARMMMCI) += mmci.o obj-$(CONFIG_MMC_PXA) += pxamci.o -obj-$(CONFIG_MMC_IMX) += imxmmc.o obj-$(CONFIG_MMC_MXC) += mxcmmc.o +obj-$(CONFIG_MMC_MXS) += mxs-mmc.o obj-$(CONFIG_MMC_SDHCI) += sdhci.o obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o -obj-$(CONFIG_MMC_SDHCI_PXA) += sdhci-pxa.o +obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI)) += sdhci-pci-data.o +obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI)) += sdhci-pci-o2micro.o +obj-$(CONFIG_MMC_SDHCI_ACPI) += sdhci-acpi.o +obj-$(CONFIG_MMC_SDHCI_PXAV3) += sdhci-pxav3.o +obj-$(CONFIG_MMC_SDHCI_PXAV2) += sdhci-pxav2.o obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o +obj-$(CONFIG_MMC_SDHCI_SIRF) += sdhci-sirf.o obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o obj-$(CONFIG_MMC_WBSD) += wbsd.o obj-$(CONFIG_MMC_AU1X) += au1xmmc.o obj-$(CONFIG_MMC_OMAP) += omap.o obj-$(CONFIG_MMC_OMAP_HS) += omap_hsmmc.o -obj-$(CONFIG_MMC_AT91) += at91_mci.o obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o obj-$(CONFIG_MMC_MSM) += msm_sdcc.o obj-$(CONFIG_MMC_MVSDIO) += mvsdio.o obj-$(CONFIG_MMC_DAVINCI) += davinci_mmc.o +obj-$(CONFIG_MMC_GOLDFISH) += android-goldfish.o obj-$(CONFIG_MMC_SPI) += mmc_spi.o ifeq ($(CONFIG_OF),y) obj-$(CONFIG_MMC_SPI) += of_mmc_spi.o @@ -28,22 +33,41 @@ endif obj-$(CONFIG_MMC_S3C) += s3cmci.o obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o -obj-$(CONFIG_MMC_CB710) += cb710-mmc.o +obj-$(CONFIG_MMC_TMIO_CORE) += tmio_mmc_core.o +tmio_mmc_core-y := tmio_mmc_pio.o +tmio_mmc_core-$(subst m,y,$(CONFIG_MMC_SDHI)) += tmio_mmc_dma.o +obj-$(CONFIG_MMC_SDHI) += sh_mobile_sdhi.o +obj-$(CONFIG_MMC_CB710) += cb710-mmc.o obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o obj-$(CONFIG_SDH_BFIN) += bfin_sdh.o +obj-$(CONFIG_MMC_DW) += dw_mmc.o +obj-$(CONFIG_MMC_DW_PLTFM) += dw_mmc-pltfm.o +obj-$(CONFIG_MMC_DW_EXYNOS) += dw_mmc-exynos.o +obj-$(CONFIG_MMC_DW_K3) += dw_mmc-k3.o +obj-$(CONFIG_MMC_DW_PCI) += dw_mmc-pci.o obj-$(CONFIG_MMC_SH_MMCIF) += sh_mmcif.o obj-$(CONFIG_MMC_JZ4740) += jz4740_mmc.o +obj-$(CONFIG_MMC_VUB300) += vub300.o obj-$(CONFIG_MMC_USHC) += ushc.o +obj-$(CONFIG_MMC_WMT) += wmt-sdmmc.o +obj-$(CONFIG_MMC_MOXART) += moxart-mmc.o +obj-$(CONFIG_MMC_SUNXI) += sunxi-mmc.o +obj-$(CONFIG_MMC_USDHI6ROL0) += usdhi6rol0.o -obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-platform.o -sdhci-platform-y := sdhci-pltfm.o -sdhci-platform-$(CONFIG_MMC_SDHCI_CNS3XXX) += sdhci-cns3xxx.o -sdhci-platform-$(CONFIG_MMC_SDHCI_ESDHC_IMX) += sdhci-esdhc-imx.o +obj-$(CONFIG_MMC_REALTEK_PCI) += rtsx_pci_sdmmc.o +obj-$(CONFIG_MMC_REALTEK_USB) += rtsx_usb_sdmmc.o -obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o -sdhci-of-y := sdhci-of-core.o -sdhci-of-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o -sdhci-of-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o +obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o +obj-$(CONFIG_MMC_SDHCI_CNS3XXX) += sdhci-cns3xxx.o +obj-$(CONFIG_MMC_SDHCI_ESDHC_IMX) += sdhci-esdhc-imx.o +obj-$(CONFIG_MMC_SDHCI_DOVE) += sdhci-dove.o +obj-$(CONFIG_MMC_SDHCI_TEGRA) += sdhci-tegra.o +obj-$(CONFIG_MMC_SDHCI_OF_ARASAN) += sdhci-of-arasan.o +obj-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o +obj-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o +obj-$(CONFIG_MMC_SDHCI_BCM_KONA) += sdhci-bcm-kona.o +obj-$(CONFIG_MMC_SDHCI_BCM2835) += sdhci-bcm2835.o +obj-$(CONFIG_MMC_SDHCI_MSM) += sdhci-msm.o ifeq ($(CONFIG_CB710_DEBUG),y) CFLAGS-cb710-mmc += -DDEBUG diff --git a/drivers/mmc/host/android-goldfish.c b/drivers/mmc/host/android-goldfish.c new file mode 100644 index 00000000000..8b4e20a3f16 --- /dev/null +++ b/drivers/mmc/host/android-goldfish.c @@ -0,0 +1,568 @@ +/* + * Copyright 2007, Google Inc. + * Copyright 2012, Intel Inc. + * + * based on omap.c driver, which was + * Copyright (C) 2004 Nokia Corporation + * Written by Tuukka Tikkanen and Juha Yrjölä <juha.yrjola@nokia.com> + * Misc hacks here and there by Tony Lindgren <tony@atomide.com> + * Other hacks (DMA, SD, etc) by David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/major.h> + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/interrupt.h> + +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/errno.h> +#include <linux/hdreg.h> +#include <linux/kdev_t.h> +#include <linux/blkdev.h> +#include <linux/mutex.h> +#include <linux/scatterlist.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/sdio.h> +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> + +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/dma-mapping.h> +#include <linux/delay.h> +#include <linux/spinlock.h> +#include <linux/timer.h> +#include <linux/clk.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/scatterlist.h> + +#include <asm/types.h> +#include <asm/io.h> +#include <asm/uaccess.h> + +#define DRIVER_NAME "goldfish_mmc" + +#define BUFFER_SIZE 16384 + +#define GOLDFISH_MMC_READ(host, addr) (readl(host->reg_base + addr)) +#define GOLDFISH_MMC_WRITE(host, addr, x) (writel(x, host->reg_base + addr)) + +enum { + /* status register */ + MMC_INT_STATUS = 0x00, + /* set this to enable IRQ */ + MMC_INT_ENABLE = 0x04, + /* set this to specify buffer address */ + MMC_SET_BUFFER = 0x08, + + /* MMC command number */ + MMC_CMD = 0x0C, + + /* MMC argument */ + MMC_ARG = 0x10, + + /* MMC response (or R2 bits 0 - 31) */ + MMC_RESP_0 = 0x14, + + /* MMC R2 response bits 32 - 63 */ + MMC_RESP_1 = 0x18, + + /* MMC R2 response bits 64 - 95 */ + MMC_RESP_2 = 0x1C, + + /* MMC R2 response bits 96 - 127 */ + MMC_RESP_3 = 0x20, + + MMC_BLOCK_LENGTH = 0x24, + MMC_BLOCK_COUNT = 0x28, + + /* MMC state flags */ + MMC_STATE = 0x2C, + + /* MMC_INT_STATUS bits */ + + MMC_STAT_END_OF_CMD = 1U << 0, + MMC_STAT_END_OF_DATA = 1U << 1, + MMC_STAT_STATE_CHANGE = 1U << 2, + MMC_STAT_CMD_TIMEOUT = 1U << 3, + + /* MMC_STATE bits */ + MMC_STATE_INSERTED = 1U << 0, + MMC_STATE_READ_ONLY = 1U << 1, +}; + +/* + * Command types + */ +#define OMAP_MMC_CMDTYPE_BC 0 +#define OMAP_MMC_CMDTYPE_BCR 1 +#define OMAP_MMC_CMDTYPE_AC 2 +#define OMAP_MMC_CMDTYPE_ADTC 3 + + +struct goldfish_mmc_host { + struct mmc_request *mrq; + struct mmc_command *cmd; + struct mmc_data *data; + struct mmc_host *mmc; + struct device *dev; + unsigned char id; /* 16xx chips have 2 MMC blocks */ + void __iomem *virt_base; + unsigned int phys_base; + int irq; + unsigned char bus_mode; + unsigned char hw_bus_mode; + + unsigned int sg_len; + unsigned dma_done:1; + unsigned dma_in_use:1; + + void __iomem *reg_base; +}; + +static inline int +goldfish_mmc_cover_is_open(struct goldfish_mmc_host *host) +{ + return 0; +} + +static ssize_t +goldfish_mmc_show_cover_switch(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct goldfish_mmc_host *host = dev_get_drvdata(dev); + + return sprintf(buf, "%s\n", goldfish_mmc_cover_is_open(host) ? "open" : + "closed"); +} + +static DEVICE_ATTR(cover_switch, S_IRUGO, goldfish_mmc_show_cover_switch, NULL); + +static void +goldfish_mmc_start_command(struct goldfish_mmc_host *host, struct mmc_command *cmd) +{ + u32 cmdreg; + u32 resptype; + u32 cmdtype; + + host->cmd = cmd; + + resptype = 0; + cmdtype = 0; + + /* Our hardware needs to know exact type */ + switch (mmc_resp_type(cmd)) { + case MMC_RSP_NONE: + break; + case MMC_RSP_R1: + case MMC_RSP_R1B: + /* resp 1, 1b, 6, 7 */ + resptype = 1; + break; + case MMC_RSP_R2: + resptype = 2; + break; + case MMC_RSP_R3: + resptype = 3; + break; + default: + dev_err(mmc_dev(host->mmc), + "Invalid response type: %04x\n", mmc_resp_type(cmd)); + break; + } + + if (mmc_cmd_type(cmd) == MMC_CMD_ADTC) + cmdtype = OMAP_MMC_CMDTYPE_ADTC; + else if (mmc_cmd_type(cmd) == MMC_CMD_BC) + cmdtype = OMAP_MMC_CMDTYPE_BC; + else if (mmc_cmd_type(cmd) == MMC_CMD_BCR) + cmdtype = OMAP_MMC_CMDTYPE_BCR; + else + cmdtype = OMAP_MMC_CMDTYPE_AC; + + cmdreg = cmd->opcode | (resptype << 8) | (cmdtype << 12); + + if (host->bus_mode == MMC_BUSMODE_OPENDRAIN) + cmdreg |= 1 << 6; + + if (cmd->flags & MMC_RSP_BUSY) + cmdreg |= 1 << 11; + + if (host->data && !(host->data->flags & MMC_DATA_WRITE)) + cmdreg |= 1 << 15; + + GOLDFISH_MMC_WRITE(host, MMC_ARG, cmd->arg); + GOLDFISH_MMC_WRITE(host, MMC_CMD, cmdreg); +} + +static void goldfish_mmc_xfer_done(struct goldfish_mmc_host *host, + struct mmc_data *data) +{ + if (host->dma_in_use) { + enum dma_data_direction dma_data_dir; + + if (data->flags & MMC_DATA_WRITE) + dma_data_dir = DMA_TO_DEVICE; + else + dma_data_dir = DMA_FROM_DEVICE; + + if (dma_data_dir == DMA_FROM_DEVICE) { + /* + * We don't really have DMA, so we need + * to copy from our platform driver buffer + */ + uint8_t *dest = (uint8_t *)sg_virt(data->sg); + memcpy(dest, host->virt_base, data->sg->length); + } + host->data->bytes_xfered += data->sg->length; + dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->sg_len, + dma_data_dir); + } + + host->data = NULL; + host->sg_len = 0; + + /* + * NOTE: MMC layer will sometimes poll-wait CMD13 next, issuing + * dozens of requests until the card finishes writing data. + * It'd be cheaper to just wait till an EOFB interrupt arrives... + */ + + if (!data->stop) { + host->mrq = NULL; + mmc_request_done(host->mmc, data->mrq); + return; + } + + goldfish_mmc_start_command(host, data->stop); +} + +static void goldfish_mmc_end_of_data(struct goldfish_mmc_host *host, + struct mmc_data *data) +{ + if (!host->dma_in_use) { + goldfish_mmc_xfer_done(host, data); + return; + } + if (host->dma_done) + goldfish_mmc_xfer_done(host, data); +} + +static void goldfish_mmc_cmd_done(struct goldfish_mmc_host *host, + struct mmc_command *cmd) +{ + host->cmd = NULL; + if (cmd->flags & MMC_RSP_PRESENT) { + if (cmd->flags & MMC_RSP_136) { + /* response type 2 */ + cmd->resp[3] = + GOLDFISH_MMC_READ(host, MMC_RESP_0); + cmd->resp[2] = + GOLDFISH_MMC_READ(host, MMC_RESP_1); + cmd->resp[1] = + GOLDFISH_MMC_READ(host, MMC_RESP_2); + cmd->resp[0] = + GOLDFISH_MMC_READ(host, MMC_RESP_3); + } else { + /* response types 1, 1b, 3, 4, 5, 6 */ + cmd->resp[0] = + GOLDFISH_MMC_READ(host, MMC_RESP_0); + } + } + + if (host->data == NULL || cmd->error) { + host->mrq = NULL; + mmc_request_done(host->mmc, cmd->mrq); + } +} + +static irqreturn_t goldfish_mmc_irq(int irq, void *dev_id) +{ + struct goldfish_mmc_host *host = (struct goldfish_mmc_host *)dev_id; + u16 status; + int end_command = 0; + int end_transfer = 0; + int transfer_error = 0; + int state_changed = 0; + int cmd_timeout = 0; + + while ((status = GOLDFISH_MMC_READ(host, MMC_INT_STATUS)) != 0) { + GOLDFISH_MMC_WRITE(host, MMC_INT_STATUS, status); + + if (status & MMC_STAT_END_OF_CMD) + end_command = 1; + + if (status & MMC_STAT_END_OF_DATA) + end_transfer = 1; + + if (status & MMC_STAT_STATE_CHANGE) + state_changed = 1; + + if (status & MMC_STAT_CMD_TIMEOUT) { + end_command = 0; + cmd_timeout = 1; + } + } + + if (cmd_timeout) { + struct mmc_request *mrq = host->mrq; + mrq->cmd->error = -ETIMEDOUT; + host->mrq = NULL; + mmc_request_done(host->mmc, mrq); + } + + if (end_command) + goldfish_mmc_cmd_done(host, host->cmd); + + if (transfer_error) + goldfish_mmc_xfer_done(host, host->data); + else if (end_transfer) { + host->dma_done = 1; + goldfish_mmc_end_of_data(host, host->data); + } else if (host->data != NULL) { + /* + * WORKAROUND -- after porting this driver from 2.6 to 3.4, + * during device initialization, cases where host->data is + * non-null but end_transfer is false would occur. Doing + * nothing in such cases results in no further interrupts, + * and initialization failure. + * TODO -- find the real cause. + */ + host->dma_done = 1; + goldfish_mmc_end_of_data(host, host->data); + } + + if (state_changed) { + u32 state = GOLDFISH_MMC_READ(host, MMC_STATE); + pr_info("%s: Card detect now %d\n", __func__, + (state & MMC_STATE_INSERTED)); + mmc_detect_change(host->mmc, 0); + } + + if (!end_command && !end_transfer && + !transfer_error && !state_changed && !cmd_timeout) { + status = GOLDFISH_MMC_READ(host, MMC_INT_STATUS); + dev_info(mmc_dev(host->mmc),"spurious irq 0x%04x\n", status); + if (status != 0) { + GOLDFISH_MMC_WRITE(host, MMC_INT_STATUS, status); + GOLDFISH_MMC_WRITE(host, MMC_INT_ENABLE, 0); + } + } + + return IRQ_HANDLED; +} + +static void goldfish_mmc_prepare_data(struct goldfish_mmc_host *host, + struct mmc_request *req) +{ + struct mmc_data *data = req->data; + int block_size; + unsigned sg_len; + enum dma_data_direction dma_data_dir; + + host->data = data; + if (data == NULL) { + GOLDFISH_MMC_WRITE(host, MMC_BLOCK_LENGTH, 0); + GOLDFISH_MMC_WRITE(host, MMC_BLOCK_COUNT, 0); + host->dma_in_use = 0; + return; + } + + block_size = data->blksz; + + GOLDFISH_MMC_WRITE(host, MMC_BLOCK_COUNT, data->blocks - 1); + GOLDFISH_MMC_WRITE(host, MMC_BLOCK_LENGTH, block_size - 1); + + /* + * Cope with calling layer confusion; it issues "single + * block" writes using multi-block scatterlists. + */ + sg_len = (data->blocks == 1) ? 1 : data->sg_len; + + if (data->flags & MMC_DATA_WRITE) + dma_data_dir = DMA_TO_DEVICE; + else + dma_data_dir = DMA_FROM_DEVICE; + + host->sg_len = dma_map_sg(mmc_dev(host->mmc), data->sg, + sg_len, dma_data_dir); + host->dma_done = 0; + host->dma_in_use = 1; + + if (dma_data_dir == DMA_TO_DEVICE) { + /* + * We don't really have DMA, so we need to copy to our + * platform driver buffer + */ + const uint8_t *src = (uint8_t *)sg_virt(data->sg); + memcpy(host->virt_base, src, data->sg->length); + } +} + +static void goldfish_mmc_request(struct mmc_host *mmc, struct mmc_request *req) +{ + struct goldfish_mmc_host *host = mmc_priv(mmc); + + WARN_ON(host->mrq != NULL); + + host->mrq = req; + goldfish_mmc_prepare_data(host, req); + goldfish_mmc_start_command(host, req->cmd); + + /* + * This is to avoid accidentally being detected as an SDIO card + * in mmc_attach_sdio(). + */ + if (req->cmd->opcode == SD_IO_SEND_OP_COND && + req->cmd->flags == (MMC_RSP_SPI_R4 | MMC_RSP_R4 | MMC_CMD_BCR)) + req->cmd->error = -EINVAL; +} + +static void goldfish_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct goldfish_mmc_host *host = mmc_priv(mmc); + + host->bus_mode = ios->bus_mode; + host->hw_bus_mode = host->bus_mode; +} + +static int goldfish_mmc_get_ro(struct mmc_host *mmc) +{ + uint32_t state; + struct goldfish_mmc_host *host = mmc_priv(mmc); + + state = GOLDFISH_MMC_READ(host, MMC_STATE); + return ((state & MMC_STATE_READ_ONLY) != 0); +} + +static const struct mmc_host_ops goldfish_mmc_ops = { + .request = goldfish_mmc_request, + .set_ios = goldfish_mmc_set_ios, + .get_ro = goldfish_mmc_get_ro, +}; + +static int goldfish_mmc_probe(struct platform_device *pdev) +{ + struct mmc_host *mmc; + struct goldfish_mmc_host *host = NULL; + struct resource *res; + int ret = 0; + int irq; + dma_addr_t buf_addr; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + irq = platform_get_irq(pdev, 0); + if (res == NULL || irq < 0) + return -ENXIO; + + mmc = mmc_alloc_host(sizeof(struct goldfish_mmc_host), &pdev->dev); + if (mmc == NULL) { + ret = -ENOMEM; + goto err_alloc_host_failed; + } + + host = mmc_priv(mmc); + host->mmc = mmc; + + pr_err("mmc: Mapping %lX to %lX\n", (long)res->start, (long)res->end); + host->reg_base = ioremap(res->start, resource_size(res)); + if (host->reg_base == NULL) { + ret = -ENOMEM; + goto ioremap_failed; + } + host->virt_base = dma_alloc_coherent(&pdev->dev, BUFFER_SIZE, + &buf_addr, GFP_KERNEL); + + if (host->virt_base == 0) { + ret = -ENOMEM; + goto dma_alloc_failed; + } + host->phys_base = buf_addr; + + host->id = pdev->id; + host->irq = irq; + + mmc->ops = &goldfish_mmc_ops; + mmc->f_min = 400000; + mmc->f_max = 24000000; + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + mmc->caps = MMC_CAP_4_BIT_DATA; + + /* Use scatterlist DMA to reduce per-transfer costs. + * NOTE max_seg_size assumption that small blocks aren't + * normally used (except e.g. for reading SD registers). + */ + mmc->max_segs = 32; + mmc->max_blk_size = 2048; /* MMC_BLOCK_LENGTH is 11 bits (+1) */ + mmc->max_blk_count = 2048; /* MMC_BLOCK_COUNT is 11 bits (+1) */ + mmc->max_req_size = BUFFER_SIZE; + mmc->max_seg_size = mmc->max_req_size; + + ret = request_irq(host->irq, goldfish_mmc_irq, 0, DRIVER_NAME, host); + if (ret) { + dev_err(&pdev->dev, "Failed IRQ Adding goldfish MMC\n"); + goto err_request_irq_failed; + } + + host->dev = &pdev->dev; + platform_set_drvdata(pdev, host); + + ret = device_create_file(&pdev->dev, &dev_attr_cover_switch); + if (ret) + dev_warn(mmc_dev(host->mmc), + "Unable to create sysfs attributes\n"); + + GOLDFISH_MMC_WRITE(host, MMC_SET_BUFFER, host->phys_base); + GOLDFISH_MMC_WRITE(host, MMC_INT_ENABLE, + MMC_STAT_END_OF_CMD | MMC_STAT_END_OF_DATA | + MMC_STAT_STATE_CHANGE | MMC_STAT_CMD_TIMEOUT); + + mmc_add_host(mmc); + return 0; + +err_request_irq_failed: + dma_free_coherent(&pdev->dev, BUFFER_SIZE, host->virt_base, + host->phys_base); +dma_alloc_failed: + iounmap(host->reg_base); +ioremap_failed: + mmc_free_host(host->mmc); +err_alloc_host_failed: + return ret; +} + +static int goldfish_mmc_remove(struct platform_device *pdev) +{ + struct goldfish_mmc_host *host = platform_get_drvdata(pdev); + + BUG_ON(host == NULL); + + mmc_remove_host(host->mmc); + free_irq(host->irq, host); + dma_free_coherent(&pdev->dev, BUFFER_SIZE, host->virt_base, host->phys_base); + iounmap(host->reg_base); + mmc_free_host(host->mmc); + return 0; +} + +static struct platform_driver goldfish_mmc_driver = { + .probe = goldfish_mmc_probe, + .remove = goldfish_mmc_remove, + .driver = { + .name = DRIVER_NAME, + }, +}; + +module_platform_driver(goldfish_mmc_driver); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c deleted file mode 100644 index 591ab540b40..00000000000 --- a/drivers/mmc/host/at91_mci.c +++ /dev/null @@ -1,1210 +0,0 @@ -/* - * linux/drivers/mmc/host/at91_mci.c - ATMEL AT91 MCI Driver - * - * Copyright (C) 2005 Cougar Creek Computing Devices Ltd, All Rights Reserved - * - * Copyright (C) 2006 Malcolm Noyes - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/* - This is the AT91 MCI driver that has been tested with both MMC cards - and SD-cards. Boards that support write protect are now supported. - The CCAT91SBC001 board does not support SD cards. - - The three entry points are at91_mci_request, at91_mci_set_ios - and at91_mci_get_ro. - - SET IOS - This configures the device to put it into the correct mode and clock speed - required. - - MCI REQUEST - MCI request processes the commands sent in the mmc_request structure. This - can consist of a processing command and a stop command in the case of - multiple block transfers. - - There are three main types of request, commands, reads and writes. - - Commands are straight forward. The command is submitted to the controller and - the request function returns. When the controller generates an interrupt to indicate - the command is finished, the response to the command are read and the mmc_request_done - function called to end the request. - - Reads and writes work in a similar manner to normal commands but involve the PDC (DMA) - controller to manage the transfers. - - A read is done from the controller directly to the scatterlist passed in from the request. - Due to a bug in the AT91RM9200 controller, when a read is completed, all the words are byte - swapped in the scatterlist buffers. AT91SAM926x are not affected by this bug. - - The sequence of read interrupts is: ENDRX, RXBUFF, CMDRDY - - A write is slightly different in that the bytes to write are read from the scatterlist - into a dma memory buffer (this is in case the source buffer should be read only). The - entire write buffer is then done from this single dma memory buffer. - - The sequence of write interrupts is: ENDTX, TXBUFE, NOTBUSY, CMDRDY - - GET RO - Gets the status of the write protect pin, if available. -*/ - -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/blkdev.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/dma-mapping.h> -#include <linux/clk.h> -#include <linux/atmel_pdc.h> -#include <linux/gfp.h> -#include <linux/highmem.h> - -#include <linux/mmc/host.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/gpio.h> - -#include <mach/board.h> -#include <mach/cpu.h> -#include <mach/at91_mci.h> - -#define DRIVER_NAME "at91_mci" - -static inline int at91mci_is_mci1rev2xx(void) -{ - return ( cpu_is_at91sam9260() - || cpu_is_at91sam9263() - || cpu_is_at91cap9() - || cpu_is_at91sam9rl() - || cpu_is_at91sam9g10() - || cpu_is_at91sam9g20() - ); -} - -#define FL_SENT_COMMAND (1 << 0) -#define FL_SENT_STOP (1 << 1) - -#define AT91_MCI_ERRORS (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE \ - | AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE \ - | AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE) - -#define at91_mci_read(host, reg) __raw_readl((host)->baseaddr + (reg)) -#define at91_mci_write(host, reg, val) __raw_writel((val), (host)->baseaddr + (reg)) - -#define MCI_BLKSIZE 512 -#define MCI_MAXBLKSIZE 4095 -#define MCI_BLKATONCE 256 -#define MCI_BUFSIZE (MCI_BLKSIZE * MCI_BLKATONCE) - -/* - * Low level type for this driver - */ -struct at91mci_host -{ - struct mmc_host *mmc; - struct mmc_command *cmd; - struct mmc_request *request; - - void __iomem *baseaddr; - int irq; - - struct at91_mmc_data *board; - int present; - - struct clk *mci_clk; - - /* - * Flag indicating when the command has been sent. This is used to - * work out whether or not to send the stop - */ - unsigned int flags; - /* flag for current bus settings */ - u32 bus_mode; - - /* DMA buffer used for transmitting */ - unsigned int* buffer; - dma_addr_t physical_address; - unsigned int total_length; - - /* Latest in the scatterlist that has been enabled for transfer, but not freed */ - int in_use_index; - - /* Latest in the scatterlist that has been enabled for transfer */ - int transfer_index; - - /* Timer for timeouts */ - struct timer_list timer; -}; - -/* - * Reset the controller and restore most of the state - */ -static void at91_reset_host(struct at91mci_host *host) -{ - unsigned long flags; - u32 mr; - u32 sdcr; - u32 dtor; - u32 imr; - - local_irq_save(flags); - imr = at91_mci_read(host, AT91_MCI_IMR); - - at91_mci_write(host, AT91_MCI_IDR, 0xffffffff); - - /* save current state */ - mr = at91_mci_read(host, AT91_MCI_MR) & 0x7fff; - sdcr = at91_mci_read(host, AT91_MCI_SDCR); - dtor = at91_mci_read(host, AT91_MCI_DTOR); - - /* reset the controller */ - at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIDIS | AT91_MCI_SWRST); - - /* restore state */ - at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN); - at91_mci_write(host, AT91_MCI_MR, mr); - at91_mci_write(host, AT91_MCI_SDCR, sdcr); - at91_mci_write(host, AT91_MCI_DTOR, dtor); - at91_mci_write(host, AT91_MCI_IER, imr); - - /* make sure sdio interrupts will fire */ - at91_mci_read(host, AT91_MCI_SR); - - local_irq_restore(flags); -} - -static void at91_timeout_timer(unsigned long data) -{ - struct at91mci_host *host; - - host = (struct at91mci_host *)data; - - if (host->request) { - dev_err(host->mmc->parent, "Timeout waiting end of packet\n"); - - if (host->cmd && host->cmd->data) { - host->cmd->data->error = -ETIMEDOUT; - } else { - if (host->cmd) - host->cmd->error = -ETIMEDOUT; - else - host->request->cmd->error = -ETIMEDOUT; - } - - at91_reset_host(host); - mmc_request_done(host->mmc, host->request); - } -} - -/* - * Copy from sg to a dma block - used for transfers - */ -static inline void at91_mci_sg_to_dma(struct at91mci_host *host, struct mmc_data *data) -{ - unsigned int len, i, size; - unsigned *dmabuf = host->buffer; - - size = data->blksz * data->blocks; - len = data->sg_len; - - /* MCI1 rev2xx Data Write Operation and number of bytes erratum */ - if (at91mci_is_mci1rev2xx()) - if (host->total_length == 12) - memset(dmabuf, 0, 12); - - /* - * Just loop through all entries. Size might not - * be the entire list though so make sure that - * we do not transfer too much. - */ - for (i = 0; i < len; i++) { - struct scatterlist *sg; - int amount; - unsigned int *sgbuffer; - - sg = &data->sg[i]; - - sgbuffer = kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset; - amount = min(size, sg->length); - size -= amount; - - if (cpu_is_at91rm9200()) { /* AT91RM9200 errata */ - int index; - - for (index = 0; index < (amount / 4); index++) - *dmabuf++ = swab32(sgbuffer[index]); - } else { - char *tmpv = (char *)dmabuf; - memcpy(tmpv, sgbuffer, amount); - tmpv += amount; - dmabuf = (unsigned *)tmpv; - } - - kunmap_atomic(sgbuffer, KM_BIO_SRC_IRQ); - - if (size == 0) - break; - } - - /* - * Check that we didn't get a request to transfer - * more data than can fit into the SG list. - */ - BUG_ON(size != 0); -} - -/* - * Handle after a dma read - */ -static void at91_mci_post_dma_read(struct at91mci_host *host) -{ - struct mmc_command *cmd; - struct mmc_data *data; - unsigned int len, i, size; - unsigned *dmabuf = host->buffer; - - pr_debug("post dma read\n"); - - cmd = host->cmd; - if (!cmd) { - pr_debug("no command\n"); - return; - } - - data = cmd->data; - if (!data) { - pr_debug("no data\n"); - return; - } - - size = data->blksz * data->blocks; - len = data->sg_len; - - at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_ENDRX); - at91_mci_write(host, AT91_MCI_IER, AT91_MCI_RXBUFF); - - for (i = 0; i < len; i++) { - struct scatterlist *sg; - int amount; - unsigned int *sgbuffer; - - sg = &data->sg[i]; - - sgbuffer = kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset; - amount = min(size, sg->length); - size -= amount; - - if (cpu_is_at91rm9200()) { /* AT91RM9200 errata */ - int index; - for (index = 0; index < (amount / 4); index++) - sgbuffer[index] = swab32(*dmabuf++); - } else { - char *tmpv = (char *)dmabuf; - memcpy(sgbuffer, tmpv, amount); - tmpv += amount; - dmabuf = (unsigned *)tmpv; - } - - flush_kernel_dcache_page(sg_page(sg)); - kunmap_atomic(sgbuffer, KM_BIO_SRC_IRQ); - data->bytes_xfered += amount; - if (size == 0) - break; - } - - pr_debug("post dma read done\n"); -} - -/* - * Handle transmitted data - */ -static void at91_mci_handle_transmitted(struct at91mci_host *host) -{ - struct mmc_command *cmd; - struct mmc_data *data; - - pr_debug("Handling the transmit\n"); - - /* Disable the transfer */ - at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); - - /* Now wait for cmd ready */ - at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_TXBUFE); - - cmd = host->cmd; - if (!cmd) return; - - data = cmd->data; - if (!data) return; - - if (cmd->data->blocks > 1) { - pr_debug("multiple write : wait for BLKE...\n"); - at91_mci_write(host, AT91_MCI_IER, AT91_MCI_BLKE); - } else - at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY); -} - -/* - * Update bytes tranfered count during a write operation - */ -static void at91_mci_update_bytes_xfered(struct at91mci_host *host) -{ - struct mmc_data *data; - - /* always deal with the effective request (and not the current cmd) */ - - if (host->request->cmd && host->request->cmd->error != 0) - return; - - if (host->request->data) { - data = host->request->data; - if (data->flags & MMC_DATA_WRITE) { - /* card is in IDLE mode now */ - pr_debug("-> bytes_xfered %d, total_length = %d\n", - data->bytes_xfered, host->total_length); - data->bytes_xfered = data->blksz * data->blocks; - } - } -} - - -/*Handle after command sent ready*/ -static int at91_mci_handle_cmdrdy(struct at91mci_host *host) -{ - if (!host->cmd) - return 1; - else if (!host->cmd->data) { - if (host->flags & FL_SENT_STOP) { - /*After multi block write, we must wait for NOTBUSY*/ - at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY); - } else return 1; - } else if (host->cmd->data->flags & MMC_DATA_WRITE) { - /*After sendding multi-block-write command, start DMA transfer*/ - at91_mci_write(host, AT91_MCI_IER, AT91_MCI_TXBUFE | AT91_MCI_BLKE); - at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN); - } - - /* command not completed, have to wait */ - return 0; -} - - -/* - * Enable the controller - */ -static void at91_mci_enable(struct at91mci_host *host) -{ - unsigned int mr; - - at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN); - at91_mci_write(host, AT91_MCI_IDR, 0xffffffff); - at91_mci_write(host, AT91_MCI_DTOR, AT91_MCI_DTOMUL_1M | AT91_MCI_DTOCYC); - mr = AT91_MCI_PDCMODE | 0x34a; - - if (at91mci_is_mci1rev2xx()) - mr |= AT91_MCI_RDPROOF | AT91_MCI_WRPROOF; - - at91_mci_write(host, AT91_MCI_MR, mr); - - /* use Slot A or B (only one at same time) */ - at91_mci_write(host, AT91_MCI_SDCR, host->board->slot_b); -} - -/* - * Disable the controller - */ -static void at91_mci_disable(struct at91mci_host *host) -{ - at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIDIS | AT91_MCI_SWRST); -} - -/* - * Send a command - */ -static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command *cmd) -{ - unsigned int cmdr, mr; - unsigned int block_length; - struct mmc_data *data = cmd->data; - - unsigned int blocks; - unsigned int ier = 0; - - host->cmd = cmd; - - /* Needed for leaving busy state before CMD1 */ - if ((at91_mci_read(host, AT91_MCI_SR) & AT91_MCI_RTOE) && (cmd->opcode == 1)) { - pr_debug("Clearing timeout\n"); - at91_mci_write(host, AT91_MCI_ARGR, 0); - at91_mci_write(host, AT91_MCI_CMDR, AT91_MCI_OPDCMD); - while (!(at91_mci_read(host, AT91_MCI_SR) & AT91_MCI_CMDRDY)) { - /* spin */ - pr_debug("Clearing: SR = %08X\n", at91_mci_read(host, AT91_MCI_SR)); - } - } - - cmdr = cmd->opcode; - - if (mmc_resp_type(cmd) == MMC_RSP_NONE) - cmdr |= AT91_MCI_RSPTYP_NONE; - else { - /* if a response is expected then allow maximum response latancy */ - cmdr |= AT91_MCI_MAXLAT; - /* set 136 bit response for R2, 48 bit response otherwise */ - if (mmc_resp_type(cmd) == MMC_RSP_R2) - cmdr |= AT91_MCI_RSPTYP_136; - else - cmdr |= AT91_MCI_RSPTYP_48; - } - - if (data) { - - if (cpu_is_at91rm9200() || cpu_is_at91sam9261()) { - if (data->blksz & 0x3) { - pr_debug("Unsupported block size\n"); - cmd->error = -EINVAL; - mmc_request_done(host->mmc, host->request); - return; - } - if (data->flags & MMC_DATA_STREAM) { - pr_debug("Stream commands not supported\n"); - cmd->error = -EINVAL; - mmc_request_done(host->mmc, host->request); - return; - } - } - - block_length = data->blksz; - blocks = data->blocks; - - /* always set data start - also set direction flag for read */ - if (data->flags & MMC_DATA_READ) - cmdr |= (AT91_MCI_TRDIR | AT91_MCI_TRCMD_START); - else if (data->flags & MMC_DATA_WRITE) - cmdr |= AT91_MCI_TRCMD_START; - - if (data->flags & MMC_DATA_STREAM) - cmdr |= AT91_MCI_TRTYP_STREAM; - if (data->blocks > 1) - cmdr |= AT91_MCI_TRTYP_MULTIPLE; - } - else { - block_length = 0; - blocks = 0; - } - - if (host->flags & FL_SENT_STOP) - cmdr |= AT91_MCI_TRCMD_STOP; - - if (host->bus_mode == MMC_BUSMODE_OPENDRAIN) - cmdr |= AT91_MCI_OPDCMD; - - /* - * Set the arguments and send the command - */ - pr_debug("Sending command %d as %08X, arg = %08X, blocks = %d, length = %d (MR = %08X)\n", - cmd->opcode, cmdr, cmd->arg, blocks, block_length, at91_mci_read(host, AT91_MCI_MR)); - - if (!data) { - at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTDIS | ATMEL_PDC_RXTDIS); - at91_mci_write(host, ATMEL_PDC_RPR, 0); - at91_mci_write(host, ATMEL_PDC_RCR, 0); - at91_mci_write(host, ATMEL_PDC_RNPR, 0); - at91_mci_write(host, ATMEL_PDC_RNCR, 0); - at91_mci_write(host, ATMEL_PDC_TPR, 0); - at91_mci_write(host, ATMEL_PDC_TCR, 0); - at91_mci_write(host, ATMEL_PDC_TNPR, 0); - at91_mci_write(host, ATMEL_PDC_TNCR, 0); - ier = AT91_MCI_CMDRDY; - } else { - /* zero block length and PDC mode */ - mr = at91_mci_read(host, AT91_MCI_MR) & 0x5fff; - mr |= (data->blksz & 0x3) ? AT91_MCI_PDCFBYTE : 0; - mr |= (block_length << 16); - mr |= AT91_MCI_PDCMODE; - at91_mci_write(host, AT91_MCI_MR, mr); - - if (!(cpu_is_at91rm9200() || cpu_is_at91sam9261())) - at91_mci_write(host, AT91_MCI_BLKR, - AT91_MCI_BLKR_BCNT(blocks) | - AT91_MCI_BLKR_BLKLEN(block_length)); - - /* - * Disable the PDC controller - */ - at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); - - if (cmdr & AT91_MCI_TRCMD_START) { - data->bytes_xfered = 0; - host->transfer_index = 0; - host->in_use_index = 0; - if (cmdr & AT91_MCI_TRDIR) { - /* - * Handle a read - */ - host->total_length = 0; - - at91_mci_write(host, ATMEL_PDC_RPR, host->physical_address); - at91_mci_write(host, ATMEL_PDC_RCR, (data->blksz & 0x3) ? - (blocks * block_length) : (blocks * block_length) / 4); - at91_mci_write(host, ATMEL_PDC_RNPR, 0); - at91_mci_write(host, ATMEL_PDC_RNCR, 0); - - ier = AT91_MCI_ENDRX /* | AT91_MCI_RXBUFF */; - } - else { - /* - * Handle a write - */ - host->total_length = block_length * blocks; - /* - * MCI1 rev2xx Data Write Operation and - * number of bytes erratum - */ - if (at91mci_is_mci1rev2xx()) - if (host->total_length < 12) - host->total_length = 12; - - at91_mci_sg_to_dma(host, data); - - pr_debug("Transmitting %d bytes\n", host->total_length); - - at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address); - at91_mci_write(host, ATMEL_PDC_TCR, (data->blksz & 0x3) ? - host->total_length : host->total_length / 4); - - ier = AT91_MCI_CMDRDY; - } - } - } - - /* - * Send the command and then enable the PDC - not the other way round as - * the data sheet says - */ - - at91_mci_write(host, AT91_MCI_ARGR, cmd->arg); - at91_mci_write(host, AT91_MCI_CMDR, cmdr); - - if (cmdr & AT91_MCI_TRCMD_START) { - if (cmdr & AT91_MCI_TRDIR) - at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN); - } - - /* Enable selected interrupts */ - at91_mci_write(host, AT91_MCI_IER, AT91_MCI_ERRORS | ier); -} - -/* - * Process the next step in the request - */ -static void at91_mci_process_next(struct at91mci_host *host) -{ - if (!(host->flags & FL_SENT_COMMAND)) { - host->flags |= FL_SENT_COMMAND; - at91_mci_send_command(host, host->request->cmd); - } - else if ((!(host->flags & FL_SENT_STOP)) && host->request->stop) { - host->flags |= FL_SENT_STOP; - at91_mci_send_command(host, host->request->stop); - } else { - del_timer(&host->timer); - /* the at91rm9200 mci controller hangs after some transfers, - * and the workaround is to reset it after each transfer. - */ - if (cpu_is_at91rm9200()) - at91_reset_host(host); - mmc_request_done(host->mmc, host->request); - } -} - -/* - * Handle a command that has been completed - */ -static void at91_mci_completed_command(struct at91mci_host *host, unsigned int status) -{ - struct mmc_command *cmd = host->cmd; - struct mmc_data *data = cmd->data; - - at91_mci_write(host, AT91_MCI_IDR, 0xffffffff & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB)); - - cmd->resp[0] = at91_mci_read(host, AT91_MCI_RSPR(0)); - cmd->resp[1] = at91_mci_read(host, AT91_MCI_RSPR(1)); - cmd->resp[2] = at91_mci_read(host, AT91_MCI_RSPR(2)); - cmd->resp[3] = at91_mci_read(host, AT91_MCI_RSPR(3)); - - pr_debug("Status = %08X/%08x [%08X %08X %08X %08X]\n", - status, at91_mci_read(host, AT91_MCI_SR), - cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]); - - if (status & AT91_MCI_ERRORS) { - if ((status & AT91_MCI_RCRCE) && !(mmc_resp_type(cmd) & MMC_RSP_CRC)) { - cmd->error = 0; - } - else { - if (status & (AT91_MCI_DTOE | AT91_MCI_DCRCE)) { - if (data) { - if (status & AT91_MCI_DTOE) - data->error = -ETIMEDOUT; - else if (status & AT91_MCI_DCRCE) - data->error = -EILSEQ; - } - } else { - if (status & AT91_MCI_RTOE) - cmd->error = -ETIMEDOUT; - else if (status & AT91_MCI_RCRCE) - cmd->error = -EILSEQ; - else - cmd->error = -EIO; - } - - pr_debug("Error detected and set to %d/%d (cmd = %d, retries = %d)\n", - cmd->error, data ? data->error : 0, - cmd->opcode, cmd->retries); - } - } - else - cmd->error = 0; - - at91_mci_process_next(host); -} - -/* - * Handle an MMC request - */ -static void at91_mci_request(struct mmc_host *mmc, struct mmc_request *mrq) -{ - struct at91mci_host *host = mmc_priv(mmc); - host->request = mrq; - host->flags = 0; - - /* more than 1s timeout needed with slow SD cards */ - mod_timer(&host->timer, jiffies + msecs_to_jiffies(2000)); - - at91_mci_process_next(host); -} - -/* - * Set the IOS - */ -static void at91_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) -{ - int clkdiv; - struct at91mci_host *host = mmc_priv(mmc); - unsigned long at91_master_clock = clk_get_rate(host->mci_clk); - - host->bus_mode = ios->bus_mode; - - if (ios->clock == 0) { - /* Disable the MCI controller */ - at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIDIS); - clkdiv = 0; - } - else { - /* Enable the MCI controller */ - at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN); - - if ((at91_master_clock % (ios->clock * 2)) == 0) - clkdiv = ((at91_master_clock / ios->clock) / 2) - 1; - else - clkdiv = (at91_master_clock / ios->clock) / 2; - - pr_debug("clkdiv = %d. mcck = %ld\n", clkdiv, - at91_master_clock / (2 * (clkdiv + 1))); - } - if (ios->bus_width == MMC_BUS_WIDTH_4 && host->board->wire4) { - pr_debug("MMC: Setting controller bus width to 4\n"); - at91_mci_write(host, AT91_MCI_SDCR, at91_mci_read(host, AT91_MCI_SDCR) | AT91_MCI_SDCBUS); - } - else { - pr_debug("MMC: Setting controller bus width to 1\n"); - at91_mci_write(host, AT91_MCI_SDCR, at91_mci_read(host, AT91_MCI_SDCR) & ~AT91_MCI_SDCBUS); - } - - /* Set the clock divider */ - at91_mci_write(host, AT91_MCI_MR, (at91_mci_read(host, AT91_MCI_MR) & ~AT91_MCI_CLKDIV) | clkdiv); - - /* maybe switch power to the card */ - if (host->board->vcc_pin) { - switch (ios->power_mode) { - case MMC_POWER_OFF: - gpio_set_value(host->board->vcc_pin, 0); - break; - case MMC_POWER_UP: - gpio_set_value(host->board->vcc_pin, 1); - break; - case MMC_POWER_ON: - break; - default: - WARN_ON(1); - } - } -} - -/* - * Handle an interrupt - */ -static irqreturn_t at91_mci_irq(int irq, void *devid) -{ - struct at91mci_host *host = devid; - int completed = 0; - unsigned int int_status, int_mask; - - int_status = at91_mci_read(host, AT91_MCI_SR); - int_mask = at91_mci_read(host, AT91_MCI_IMR); - - pr_debug("MCI irq: status = %08X, %08X, %08X\n", int_status, int_mask, - int_status & int_mask); - - int_status = int_status & int_mask; - - if (int_status & AT91_MCI_ERRORS) { - completed = 1; - - if (int_status & AT91_MCI_UNRE) - pr_debug("MMC: Underrun error\n"); - if (int_status & AT91_MCI_OVRE) - pr_debug("MMC: Overrun error\n"); - if (int_status & AT91_MCI_DTOE) - pr_debug("MMC: Data timeout\n"); - if (int_status & AT91_MCI_DCRCE) - pr_debug("MMC: CRC error in data\n"); - if (int_status & AT91_MCI_RTOE) - pr_debug("MMC: Response timeout\n"); - if (int_status & AT91_MCI_RENDE) - pr_debug("MMC: Response end bit error\n"); - if (int_status & AT91_MCI_RCRCE) - pr_debug("MMC: Response CRC error\n"); - if (int_status & AT91_MCI_RDIRE) - pr_debug("MMC: Response direction error\n"); - if (int_status & AT91_MCI_RINDE) - pr_debug("MMC: Response index error\n"); - } else { - /* Only continue processing if no errors */ - - if (int_status & AT91_MCI_TXBUFE) { - pr_debug("TX buffer empty\n"); - at91_mci_handle_transmitted(host); - } - - if (int_status & AT91_MCI_ENDRX) { - pr_debug("ENDRX\n"); - at91_mci_post_dma_read(host); - } - - if (int_status & AT91_MCI_RXBUFF) { - pr_debug("RX buffer full\n"); - at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); - at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_RXBUFF | AT91_MCI_ENDRX); - completed = 1; - } - - if (int_status & AT91_MCI_ENDTX) - pr_debug("Transmit has ended\n"); - - if (int_status & AT91_MCI_NOTBUSY) { - pr_debug("Card is ready\n"); - at91_mci_update_bytes_xfered(host); - completed = 1; - } - - if (int_status & AT91_MCI_DTIP) - pr_debug("Data transfer in progress\n"); - - if (int_status & AT91_MCI_BLKE) { - pr_debug("Block transfer has ended\n"); - if (host->request->data && host->request->data->blocks > 1) { - /* multi block write : complete multi write - * command and send stop */ - completed = 1; - } else { - at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY); - } - } - - if (int_status & AT91_MCI_SDIOIRQA) - mmc_signal_sdio_irq(host->mmc); - - if (int_status & AT91_MCI_SDIOIRQB) - mmc_signal_sdio_irq(host->mmc); - - if (int_status & AT91_MCI_TXRDY) - pr_debug("Ready to transmit\n"); - - if (int_status & AT91_MCI_RXRDY) - pr_debug("Ready to receive\n"); - - if (int_status & AT91_MCI_CMDRDY) { - pr_debug("Command ready\n"); - completed = at91_mci_handle_cmdrdy(host); - } - } - - if (completed) { - pr_debug("Completed command\n"); - at91_mci_write(host, AT91_MCI_IDR, 0xffffffff & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB)); - at91_mci_completed_command(host, int_status); - } else - at91_mci_write(host, AT91_MCI_IDR, int_status & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB)); - - return IRQ_HANDLED; -} - -static irqreturn_t at91_mmc_det_irq(int irq, void *_host) -{ - struct at91mci_host *host = _host; - int present = !gpio_get_value(irq_to_gpio(irq)); - - /* - * we expect this irq on both insert and remove, - * and use a short delay to debounce. - */ - if (present != host->present) { - host->present = present; - pr_debug("%s: card %s\n", mmc_hostname(host->mmc), - present ? "insert" : "remove"); - if (!present) { - pr_debug("****** Resetting SD-card bus width ******\n"); - at91_mci_write(host, AT91_MCI_SDCR, at91_mci_read(host, AT91_MCI_SDCR) & ~AT91_MCI_SDCBUS); - } - /* 0.5s needed because of early card detect switch firing */ - mmc_detect_change(host->mmc, msecs_to_jiffies(500)); - } - return IRQ_HANDLED; -} - -static int at91_mci_get_ro(struct mmc_host *mmc) -{ - struct at91mci_host *host = mmc_priv(mmc); - - if (host->board->wp_pin) - return !!gpio_get_value(host->board->wp_pin); - /* - * Board doesn't support read only detection; let the mmc core - * decide what to do. - */ - return -ENOSYS; -} - -static void at91_mci_enable_sdio_irq(struct mmc_host *mmc, int enable) -{ - struct at91mci_host *host = mmc_priv(mmc); - - pr_debug("%s: sdio_irq %c : %s\n", mmc_hostname(host->mmc), - host->board->slot_b ? 'B':'A', enable ? "enable" : "disable"); - at91_mci_write(host, enable ? AT91_MCI_IER : AT91_MCI_IDR, - host->board->slot_b ? AT91_MCI_SDIOIRQB : AT91_MCI_SDIOIRQA); - -} - -static const struct mmc_host_ops at91_mci_ops = { - .request = at91_mci_request, - .set_ios = at91_mci_set_ios, - .get_ro = at91_mci_get_ro, - .enable_sdio_irq = at91_mci_enable_sdio_irq, -}; - -/* - * Probe for the device - */ -static int __init at91_mci_probe(struct platform_device *pdev) -{ - struct mmc_host *mmc; - struct at91mci_host *host; - struct resource *res; - int ret; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENXIO; - - if (!request_mem_region(res->start, resource_size(res), DRIVER_NAME)) - return -EBUSY; - - mmc = mmc_alloc_host(sizeof(struct at91mci_host), &pdev->dev); - if (!mmc) { - ret = -ENOMEM; - dev_dbg(&pdev->dev, "couldn't allocate mmc host\n"); - goto fail6; - } - - mmc->ops = &at91_mci_ops; - mmc->f_min = 375000; - mmc->f_max = 25000000; - mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; - mmc->caps = 0; - - mmc->max_blk_size = MCI_MAXBLKSIZE; - mmc->max_blk_count = MCI_BLKATONCE; - mmc->max_req_size = MCI_BUFSIZE; - mmc->max_segs = MCI_BLKATONCE; - mmc->max_seg_size = MCI_BUFSIZE; - - host = mmc_priv(mmc); - host->mmc = mmc; - host->bus_mode = 0; - host->board = pdev->dev.platform_data; - if (host->board->wire4) { - if (at91mci_is_mci1rev2xx()) - mmc->caps |= MMC_CAP_4_BIT_DATA; - else - dev_warn(&pdev->dev, "4 wire bus mode not supported" - " - using 1 wire\n"); - } - - host->buffer = dma_alloc_coherent(&pdev->dev, MCI_BUFSIZE, - &host->physical_address, GFP_KERNEL); - if (!host->buffer) { - ret = -ENOMEM; - dev_err(&pdev->dev, "Can't allocate transmit buffer\n"); - goto fail5; - } - - /* Add SDIO capability when available */ - if (at91mci_is_mci1rev2xx()) { - /* at91mci MCI1 rev2xx sdio interrupt erratum */ - if (host->board->wire4 || !host->board->slot_b) - mmc->caps |= MMC_CAP_SDIO_IRQ; - } - - /* - * Reserve GPIOs ... board init code makes sure these pins are set - * up as GPIOs with the right direction (input, except for vcc) - */ - if (host->board->det_pin) { - ret = gpio_request(host->board->det_pin, "mmc_detect"); - if (ret < 0) { - dev_dbg(&pdev->dev, "couldn't claim card detect pin\n"); - goto fail4b; - } - } - if (host->board->wp_pin) { - ret = gpio_request(host->board->wp_pin, "mmc_wp"); - if (ret < 0) { - dev_dbg(&pdev->dev, "couldn't claim wp sense pin\n"); - goto fail4; - } - } - if (host->board->vcc_pin) { - ret = gpio_request(host->board->vcc_pin, "mmc_vcc"); - if (ret < 0) { - dev_dbg(&pdev->dev, "couldn't claim vcc switch pin\n"); - goto fail3; - } - } - - /* - * Get Clock - */ - host->mci_clk = clk_get(&pdev->dev, "mci_clk"); - if (IS_ERR(host->mci_clk)) { - ret = -ENODEV; - dev_dbg(&pdev->dev, "no mci_clk?\n"); - goto fail2; - } - - /* - * Map I/O region - */ - host->baseaddr = ioremap(res->start, resource_size(res)); - if (!host->baseaddr) { - ret = -ENOMEM; - goto fail1; - } - - /* - * Reset hardware - */ - clk_enable(host->mci_clk); /* Enable the peripheral clock */ - at91_mci_disable(host); - at91_mci_enable(host); - - /* - * Allocate the MCI interrupt - */ - host->irq = platform_get_irq(pdev, 0); - ret = request_irq(host->irq, at91_mci_irq, IRQF_SHARED, - mmc_hostname(mmc), host); - if (ret) { - dev_dbg(&pdev->dev, "request MCI interrupt failed\n"); - goto fail0; - } - - setup_timer(&host->timer, at91_timeout_timer, (unsigned long)host); - - platform_set_drvdata(pdev, mmc); - - /* - * Add host to MMC layer - */ - if (host->board->det_pin) { - host->present = !gpio_get_value(host->board->det_pin); - } - else - host->present = -1; - - mmc_add_host(mmc); - - /* - * monitor card insertion/removal if we can - */ - if (host->board->det_pin) { - ret = request_irq(gpio_to_irq(host->board->det_pin), - at91_mmc_det_irq, 0, mmc_hostname(mmc), host); - if (ret) - dev_warn(&pdev->dev, "request MMC detect irq failed\n"); - else - device_init_wakeup(&pdev->dev, 1); - } - - pr_debug("Added MCI driver\n"); - - return 0; - -fail0: - clk_disable(host->mci_clk); - iounmap(host->baseaddr); -fail1: - clk_put(host->mci_clk); -fail2: - if (host->board->vcc_pin) - gpio_free(host->board->vcc_pin); -fail3: - if (host->board->wp_pin) - gpio_free(host->board->wp_pin); -fail4: - if (host->board->det_pin) - gpio_free(host->board->det_pin); -fail4b: - if (host->buffer) - dma_free_coherent(&pdev->dev, MCI_BUFSIZE, - host->buffer, host->physical_address); -fail5: - mmc_free_host(mmc); -fail6: - release_mem_region(res->start, resource_size(res)); - dev_err(&pdev->dev, "probe failed, err %d\n", ret); - return ret; -} - -/* - * Remove a device - */ -static int __exit at91_mci_remove(struct platform_device *pdev) -{ - struct mmc_host *mmc = platform_get_drvdata(pdev); - struct at91mci_host *host; - struct resource *res; - - if (!mmc) - return -1; - - host = mmc_priv(mmc); - - if (host->buffer) - dma_free_coherent(&pdev->dev, MCI_BUFSIZE, - host->buffer, host->physical_address); - - if (host->board->det_pin) { - if (device_can_wakeup(&pdev->dev)) - free_irq(gpio_to_irq(host->board->det_pin), host); - device_init_wakeup(&pdev->dev, 0); - gpio_free(host->board->det_pin); - } - - at91_mci_disable(host); - del_timer_sync(&host->timer); - mmc_remove_host(mmc); - free_irq(host->irq, host); - - clk_disable(host->mci_clk); /* Disable the peripheral clock */ - clk_put(host->mci_clk); - - if (host->board->vcc_pin) - gpio_free(host->board->vcc_pin); - if (host->board->wp_pin) - gpio_free(host->board->wp_pin); - - iounmap(host->baseaddr); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(res->start, resource_size(res)); - - mmc_free_host(mmc); - platform_set_drvdata(pdev, NULL); - pr_debug("MCI Removed\n"); - - return 0; -} - -#ifdef CONFIG_PM -static int at91_mci_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct mmc_host *mmc = platform_get_drvdata(pdev); - struct at91mci_host *host = mmc_priv(mmc); - int ret = 0; - - if (host->board->det_pin && device_may_wakeup(&pdev->dev)) - enable_irq_wake(host->board->det_pin); - - if (mmc) - ret = mmc_suspend_host(mmc); - - return ret; -} - -static int at91_mci_resume(struct platform_device *pdev) -{ - struct mmc_host *mmc = platform_get_drvdata(pdev); - struct at91mci_host *host = mmc_priv(mmc); - int ret = 0; - - if (host->board->det_pin && device_may_wakeup(&pdev->dev)) - disable_irq_wake(host->board->det_pin); - - if (mmc) - ret = mmc_resume_host(mmc); - - return ret; -} -#else -#define at91_mci_suspend NULL -#define at91_mci_resume NULL -#endif - -static struct platform_driver at91_mci_driver = { - .remove = __exit_p(at91_mci_remove), - .suspend = at91_mci_suspend, - .resume = at91_mci_resume, - .driver = { - .name = DRIVER_NAME, - .owner = THIS_MODULE, - }, -}; - -static int __init at91_mci_init(void) -{ - return platform_driver_probe(&at91_mci_driver, at91_mci_probe); -} - -static void __exit at91_mci_exit(void) -{ - platform_driver_unregister(&at91_mci_driver); -} - -module_init(at91_mci_init); -module_exit(at91_mci_exit); - -MODULE_DESCRIPTION("AT91 Multimedia Card Interface driver"); -MODULE_AUTHOR("Nick Randell"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:at91_mci"); diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h index fc8a0fe7c5c..c97001e1522 100644 --- a/drivers/mmc/host/atmel-mci-regs.h +++ b/drivers/mmc/host/atmel-mci-regs.h @@ -17,112 +17,148 @@ #define __DRIVERS_MMC_ATMEL_MCI_H__ /* MCI Register Definitions */ -#define MCI_CR 0x0000 /* Control */ -# define MCI_CR_MCIEN ( 1 << 0) /* MCI Enable */ -# define MCI_CR_MCIDIS ( 1 << 1) /* MCI Disable */ -# define MCI_CR_PWSEN ( 1 << 2) /* Power Save Enable */ -# define MCI_CR_PWSDIS ( 1 << 3) /* Power Save Disable */ -# define MCI_CR_SWRST ( 1 << 7) /* Software Reset */ -#define MCI_MR 0x0004 /* Mode */ -# define MCI_MR_CLKDIV(x) ((x) << 0) /* Clock Divider */ -# define MCI_MR_PWSDIV(x) ((x) << 8) /* Power Saving Divider */ -# define MCI_MR_RDPROOF ( 1 << 11) /* Read Proof */ -# define MCI_MR_WRPROOF ( 1 << 12) /* Write Proof */ -# define MCI_MR_PDCFBYTE ( 1 << 13) /* Force Byte Transfer */ -# define MCI_MR_PDCPADV ( 1 << 14) /* Padding Value */ -# define MCI_MR_PDCMODE ( 1 << 15) /* PDC-oriented Mode */ -#define MCI_DTOR 0x0008 /* Data Timeout */ -# define MCI_DTOCYC(x) ((x) << 0) /* Data Timeout Cycles */ -# define MCI_DTOMUL(x) ((x) << 4) /* Data Timeout Multiplier */ -#define MCI_SDCR 0x000c /* SD Card / SDIO */ -# define MCI_SDCSEL_SLOT_A ( 0 << 0) /* Select SD slot A */ -# define MCI_SDCSEL_SLOT_B ( 1 << 0) /* Select SD slot A */ -# define MCI_SDCSEL_MASK ( 3 << 0) -# define MCI_SDCBUS_1BIT ( 0 << 6) /* 1-bit data bus */ -# define MCI_SDCBUS_4BIT ( 2 << 6) /* 4-bit data bus */ -# define MCI_SDCBUS_8BIT ( 3 << 6) /* 8-bit data bus[2] */ -# define MCI_SDCBUS_MASK ( 3 << 6) -#define MCI_ARGR 0x0010 /* Command Argument */ -#define MCI_CMDR 0x0014 /* Command */ -# define MCI_CMDR_CMDNB(x) ((x) << 0) /* Command Opcode */ -# define MCI_CMDR_RSPTYP_NONE ( 0 << 6) /* No response */ -# define MCI_CMDR_RSPTYP_48BIT ( 1 << 6) /* 48-bit response */ -# define MCI_CMDR_RSPTYP_136BIT ( 2 << 6) /* 136-bit response */ -# define MCI_CMDR_SPCMD_INIT ( 1 << 8) /* Initialization command */ -# define MCI_CMDR_SPCMD_SYNC ( 2 << 8) /* Synchronized command */ -# define MCI_CMDR_SPCMD_INT ( 4 << 8) /* Interrupt command */ -# define MCI_CMDR_SPCMD_INTRESP ( 5 << 8) /* Interrupt response */ -# define MCI_CMDR_OPDCMD ( 1 << 11) /* Open Drain */ -# define MCI_CMDR_MAXLAT_5CYC ( 0 << 12) /* Max latency 5 cycles */ -# define MCI_CMDR_MAXLAT_64CYC ( 1 << 12) /* Max latency 64 cycles */ -# define MCI_CMDR_START_XFER ( 1 << 16) /* Start data transfer */ -# define MCI_CMDR_STOP_XFER ( 2 << 16) /* Stop data transfer */ -# define MCI_CMDR_TRDIR_WRITE ( 0 << 18) /* Write data */ -# define MCI_CMDR_TRDIR_READ ( 1 << 18) /* Read data */ -# define MCI_CMDR_BLOCK ( 0 << 19) /* Single-block transfer */ -# define MCI_CMDR_MULTI_BLOCK ( 1 << 19) /* Multi-block transfer */ -# define MCI_CMDR_STREAM ( 2 << 19) /* MMC Stream transfer */ -# define MCI_CMDR_SDIO_BYTE ( 4 << 19) /* SDIO Byte transfer */ -# define MCI_CMDR_SDIO_BLOCK ( 5 << 19) /* SDIO Block transfer */ -# define MCI_CMDR_SDIO_SUSPEND ( 1 << 24) /* SDIO Suspend Command */ -# define MCI_CMDR_SDIO_RESUME ( 2 << 24) /* SDIO Resume Command */ -#define MCI_BLKR 0x0018 /* Block */ -# define MCI_BCNT(x) ((x) << 0) /* Data Block Count */ -# define MCI_BLKLEN(x) ((x) << 16) /* Data Block Length */ -#define MCI_CSTOR 0x001c /* Completion Signal Timeout[2] */ -# define MCI_CSTOCYC(x) ((x) << 0) /* CST cycles */ -# define MCI_CSTOMUL(x) ((x) << 4) /* CST multiplier */ -#define MCI_RSPR 0x0020 /* Response 0 */ -#define MCI_RSPR1 0x0024 /* Response 1 */ -#define MCI_RSPR2 0x0028 /* Response 2 */ -#define MCI_RSPR3 0x002c /* Response 3 */ -#define MCI_RDR 0x0030 /* Receive Data */ -#define MCI_TDR 0x0034 /* Transmit Data */ -#define MCI_SR 0x0040 /* Status */ -#define MCI_IER 0x0044 /* Interrupt Enable */ -#define MCI_IDR 0x0048 /* Interrupt Disable */ -#define MCI_IMR 0x004c /* Interrupt Mask */ -# define MCI_CMDRDY ( 1 << 0) /* Command Ready */ -# define MCI_RXRDY ( 1 << 1) /* Receiver Ready */ -# define MCI_TXRDY ( 1 << 2) /* Transmitter Ready */ -# define MCI_BLKE ( 1 << 3) /* Data Block Ended */ -# define MCI_DTIP ( 1 << 4) /* Data Transfer In Progress */ -# define MCI_NOTBUSY ( 1 << 5) /* Data Not Busy */ -# define MCI_SDIOIRQA ( 1 << 8) /* SDIO IRQ in slot A */ -# define MCI_SDIOIRQB ( 1 << 9) /* SDIO IRQ in slot B */ -# define MCI_RINDE ( 1 << 16) /* Response Index Error */ -# define MCI_RDIRE ( 1 << 17) /* Response Direction Error */ -# define MCI_RCRCE ( 1 << 18) /* Response CRC Error */ -# define MCI_RENDE ( 1 << 19) /* Response End Bit Error */ -# define MCI_RTOE ( 1 << 20) /* Response Time-Out Error */ -# define MCI_DCRCE ( 1 << 21) /* Data CRC Error */ -# define MCI_DTOE ( 1 << 22) /* Data Time-Out Error */ -# define MCI_OVRE ( 1 << 30) /* RX Overrun Error */ -# define MCI_UNRE ( 1 << 31) /* TX Underrun Error */ -#define MCI_DMA 0x0050 /* DMA Configuration[2] */ -# define MCI_DMA_OFFSET(x) ((x) << 0) /* DMA Write Buffer Offset */ -# define MCI_DMA_CHKSIZE(x) ((x) << 4) /* DMA Channel Read and Write Chunk Size */ -# define MCI_DMAEN ( 1 << 8) /* DMA Hardware Handshaking Enable */ -#define MCI_CFG 0x0054 /* Configuration[2] */ -# define MCI_CFG_FIFOMODE_1DATA ( 1 << 0) /* MCI Internal FIFO control mode */ -# define MCI_CFG_FERRCTRL_COR ( 1 << 4) /* Flow Error flag reset control mode */ -# define MCI_CFG_HSMODE ( 1 << 8) /* High Speed Mode */ -# define MCI_CFG_LSYNC ( 1 << 12) /* Synchronize on the last block */ -#define MCI_WPMR 0x00e4 /* Write Protection Mode[2] */ -# define MCI_WP_EN ( 1 << 0) /* WP Enable */ -# define MCI_WP_KEY (0x4d4349 << 8) /* WP Key */ -#define MCI_WPSR 0x00e8 /* Write Protection Status[2] */ -# define MCI_GET_WP_VS(x) ((x) & 0x0f) -# define MCI_GET_WP_VSRC(x) (((x) >> 8) & 0xffff) -#define MCI_FIFO_APERTURE 0x0200 /* FIFO Aperture[2] */ +#define ATMCI_CR 0x0000 /* Control */ +# define ATMCI_CR_MCIEN ( 1 << 0) /* MCI Enable */ +# define ATMCI_CR_MCIDIS ( 1 << 1) /* MCI Disable */ +# define ATMCI_CR_PWSEN ( 1 << 2) /* Power Save Enable */ +# define ATMCI_CR_PWSDIS ( 1 << 3) /* Power Save Disable */ +# define ATMCI_CR_SWRST ( 1 << 7) /* Software Reset */ +#define ATMCI_MR 0x0004 /* Mode */ +# define ATMCI_MR_CLKDIV(x) ((x) << 0) /* Clock Divider */ +# define ATMCI_MR_PWSDIV(x) ((x) << 8) /* Power Saving Divider */ +# define ATMCI_MR_RDPROOF ( 1 << 11) /* Read Proof */ +# define ATMCI_MR_WRPROOF ( 1 << 12) /* Write Proof */ +# define ATMCI_MR_PDCFBYTE ( 1 << 13) /* Force Byte Transfer */ +# define ATMCI_MR_PDCPADV ( 1 << 14) /* Padding Value */ +# define ATMCI_MR_PDCMODE ( 1 << 15) /* PDC-oriented Mode */ +# define ATMCI_MR_CLKODD(x) ((x) << 16) /* LSB of Clock Divider */ +#define ATMCI_DTOR 0x0008 /* Data Timeout */ +# define ATMCI_DTOCYC(x) ((x) << 0) /* Data Timeout Cycles */ +# define ATMCI_DTOMUL(x) ((x) << 4) /* Data Timeout Multiplier */ +#define ATMCI_SDCR 0x000c /* SD Card / SDIO */ +# define ATMCI_SDCSEL_SLOT_A ( 0 << 0) /* Select SD slot A */ +# define ATMCI_SDCSEL_SLOT_B ( 1 << 0) /* Select SD slot A */ +# define ATMCI_SDCSEL_MASK ( 3 << 0) +# define ATMCI_SDCBUS_1BIT ( 0 << 6) /* 1-bit data bus */ +# define ATMCI_SDCBUS_4BIT ( 2 << 6) /* 4-bit data bus */ +# define ATMCI_SDCBUS_8BIT ( 3 << 6) /* 8-bit data bus[2] */ +# define ATMCI_SDCBUS_MASK ( 3 << 6) +#define ATMCI_ARGR 0x0010 /* Command Argument */ +#define ATMCI_CMDR 0x0014 /* Command */ +# define ATMCI_CMDR_CMDNB(x) ((x) << 0) /* Command Opcode */ +# define ATMCI_CMDR_RSPTYP_NONE ( 0 << 6) /* No response */ +# define ATMCI_CMDR_RSPTYP_48BIT ( 1 << 6) /* 48-bit response */ +# define ATMCI_CMDR_RSPTYP_136BIT ( 2 << 6) /* 136-bit response */ +# define ATMCI_CMDR_SPCMD_INIT ( 1 << 8) /* Initialization command */ +# define ATMCI_CMDR_SPCMD_SYNC ( 2 << 8) /* Synchronized command */ +# define ATMCI_CMDR_SPCMD_INT ( 4 << 8) /* Interrupt command */ +# define ATMCI_CMDR_SPCMD_INTRESP ( 5 << 8) /* Interrupt response */ +# define ATMCI_CMDR_OPDCMD ( 1 << 11) /* Open Drain */ +# define ATMCI_CMDR_MAXLAT_5CYC ( 0 << 12) /* Max latency 5 cycles */ +# define ATMCI_CMDR_MAXLAT_64CYC ( 1 << 12) /* Max latency 64 cycles */ +# define ATMCI_CMDR_START_XFER ( 1 << 16) /* Start data transfer */ +# define ATMCI_CMDR_STOP_XFER ( 2 << 16) /* Stop data transfer */ +# define ATMCI_CMDR_TRDIR_WRITE ( 0 << 18) /* Write data */ +# define ATMCI_CMDR_TRDIR_READ ( 1 << 18) /* Read data */ +# define ATMCI_CMDR_BLOCK ( 0 << 19) /* Single-block transfer */ +# define ATMCI_CMDR_MULTI_BLOCK ( 1 << 19) /* Multi-block transfer */ +# define ATMCI_CMDR_STREAM ( 2 << 19) /* MMC Stream transfer */ +# define ATMCI_CMDR_SDIO_BYTE ( 4 << 19) /* SDIO Byte transfer */ +# define ATMCI_CMDR_SDIO_BLOCK ( 5 << 19) /* SDIO Block transfer */ +# define ATMCI_CMDR_SDIO_SUSPEND ( 1 << 24) /* SDIO Suspend Command */ +# define ATMCI_CMDR_SDIO_RESUME ( 2 << 24) /* SDIO Resume Command */ +#define ATMCI_BLKR 0x0018 /* Block */ +# define ATMCI_BCNT(x) ((x) << 0) /* Data Block Count */ +# define ATMCI_BLKLEN(x) ((x) << 16) /* Data Block Length */ +#define ATMCI_CSTOR 0x001c /* Completion Signal Timeout[2] */ +# define ATMCI_CSTOCYC(x) ((x) << 0) /* CST cycles */ +# define ATMCI_CSTOMUL(x) ((x) << 4) /* CST multiplier */ +#define ATMCI_RSPR 0x0020 /* Response 0 */ +#define ATMCI_RSPR1 0x0024 /* Response 1 */ +#define ATMCI_RSPR2 0x0028 /* Response 2 */ +#define ATMCI_RSPR3 0x002c /* Response 3 */ +#define ATMCI_RDR 0x0030 /* Receive Data */ +#define ATMCI_TDR 0x0034 /* Transmit Data */ +#define ATMCI_SR 0x0040 /* Status */ +#define ATMCI_IER 0x0044 /* Interrupt Enable */ +#define ATMCI_IDR 0x0048 /* Interrupt Disable */ +#define ATMCI_IMR 0x004c /* Interrupt Mask */ +# define ATMCI_CMDRDY ( 1 << 0) /* Command Ready */ +# define ATMCI_RXRDY ( 1 << 1) /* Receiver Ready */ +# define ATMCI_TXRDY ( 1 << 2) /* Transmitter Ready */ +# define ATMCI_BLKE ( 1 << 3) /* Data Block Ended */ +# define ATMCI_DTIP ( 1 << 4) /* Data Transfer In Progress */ +# define ATMCI_NOTBUSY ( 1 << 5) /* Data Not Busy */ +# define ATMCI_ENDRX ( 1 << 6) /* End of RX Buffer */ +# define ATMCI_ENDTX ( 1 << 7) /* End of TX Buffer */ +# define ATMCI_SDIOIRQA ( 1 << 8) /* SDIO IRQ in slot A */ +# define ATMCI_SDIOIRQB ( 1 << 9) /* SDIO IRQ in slot B */ +# define ATMCI_SDIOWAIT ( 1 << 12) /* SDIO Read Wait Operation Status */ +# define ATMCI_CSRCV ( 1 << 13) /* CE-ATA Completion Signal Received */ +# define ATMCI_RXBUFF ( 1 << 14) /* RX Buffer Full */ +# define ATMCI_TXBUFE ( 1 << 15) /* TX Buffer Empty */ +# define ATMCI_RINDE ( 1 << 16) /* Response Index Error */ +# define ATMCI_RDIRE ( 1 << 17) /* Response Direction Error */ +# define ATMCI_RCRCE ( 1 << 18) /* Response CRC Error */ +# define ATMCI_RENDE ( 1 << 19) /* Response End Bit Error */ +# define ATMCI_RTOE ( 1 << 20) /* Response Time-Out Error */ +# define ATMCI_DCRCE ( 1 << 21) /* Data CRC Error */ +# define ATMCI_DTOE ( 1 << 22) /* Data Time-Out Error */ +# define ATMCI_CSTOE ( 1 << 23) /* Completion Signal Time-out Error */ +# define ATMCI_BLKOVRE ( 1 << 24) /* DMA Block Overrun Error */ +# define ATMCI_DMADONE ( 1 << 25) /* DMA Transfer Done */ +# define ATMCI_FIFOEMPTY ( 1 << 26) /* FIFO Empty Flag */ +# define ATMCI_XFRDONE ( 1 << 27) /* Transfer Done Flag */ +# define ATMCI_ACKRCV ( 1 << 28) /* Boot Operation Acknowledge Received */ +# define ATMCI_ACKRCVE ( 1 << 29) /* Boot Operation Acknowledge Error */ +# define ATMCI_OVRE ( 1 << 30) /* RX Overrun Error */ +# define ATMCI_UNRE ( 1 << 31) /* TX Underrun Error */ +#define ATMCI_DMA 0x0050 /* DMA Configuration[2] */ +# define ATMCI_DMA_OFFSET(x) ((x) << 0) /* DMA Write Buffer Offset */ +# define ATMCI_DMA_CHKSIZE(x) ((x) << 4) /* DMA Channel Read and Write Chunk Size */ +# define ATMCI_DMAEN ( 1 << 8) /* DMA Hardware Handshaking Enable */ +#define ATMCI_CFG 0x0054 /* Configuration[2] */ +# define ATMCI_CFG_FIFOMODE_1DATA ( 1 << 0) /* MCI Internal FIFO control mode */ +# define ATMCI_CFG_FERRCTRL_COR ( 1 << 4) /* Flow Error flag reset control mode */ +# define ATMCI_CFG_HSMODE ( 1 << 8) /* High Speed Mode */ +# define ATMCI_CFG_LSYNC ( 1 << 12) /* Synchronize on the last block */ +#define ATMCI_WPMR 0x00e4 /* Write Protection Mode[2] */ +# define ATMCI_WP_EN ( 1 << 0) /* WP Enable */ +# define ATMCI_WP_KEY (0x4d4349 << 8) /* WP Key */ +#define ATMCI_WPSR 0x00e8 /* Write Protection Status[2] */ +# define ATMCI_GET_WP_VS(x) ((x) & 0x0f) +# define ATMCI_GET_WP_VSRC(x) (((x) >> 8) & 0xffff) +#define ATMCI_VERSION 0x00FC /* Version */ +#define ATMCI_FIFO_APERTURE 0x0200 /* FIFO Aperture[2] */ /* This is not including the FIFO Aperture on MCI2 */ -#define MCI_REGS_SIZE 0x100 +#define ATMCI_REGS_SIZE 0x100 /* Register access macros */ -#define mci_readl(port,reg) \ - __raw_readl((port)->regs + MCI_##reg) -#define mci_writel(port,reg,value) \ - __raw_writel((value), (port)->regs + MCI_##reg) +#define atmci_readl(port,reg) \ + __raw_readl((port)->regs + reg) +#define atmci_writel(port,reg,value) \ + __raw_writel((value), (port)->regs + reg) + +/* On AVR chips the Peripheral DMA Controller is not connected to MCI. */ +#ifdef CONFIG_AVR32 +# define ATMCI_PDC_CONNECTED 0 +#else +# define ATMCI_PDC_CONNECTED 1 +#endif + +/* + * Fix sconfig's burst size according to atmel MCI. We need to convert them as: + * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3. + * + * This can be done by finding most significant bit set. + */ +static inline unsigned int atmci_convert_chksize(unsigned int maxburst) +{ + if (maxburst > 1) + return fls(maxburst) - 2; + else + return 0; +} #endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */ diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 301351a5d83..bb585d94090 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -19,63 +19,96 @@ #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> #include <linux/platform_device.h> #include <linux/scatterlist.h> #include <linux/seq_file.h> #include <linux/slab.h> #include <linux/stat.h> +#include <linux/types.h> +#include <linux/platform_data/atmel.h> #include <linux/mmc/host.h> +#include <linux/mmc/sdio.h> #include <mach/atmel-mci.h> #include <linux/atmel-mci.h> +#include <linux/atmel_pdc.h> +#include <asm/cacheflush.h> #include <asm/io.h> #include <asm/unaligned.h> -#include <mach/cpu.h> -#include <mach/board.h> - #include "atmel-mci-regs.h" -#define ATMCI_DATA_ERROR_FLAGS (MCI_DCRCE | MCI_DTOE | MCI_OVRE | MCI_UNRE) +#define ATMCI_DATA_ERROR_FLAGS (ATMCI_DCRCE | ATMCI_DTOE | ATMCI_OVRE | ATMCI_UNRE) #define ATMCI_DMA_THRESHOLD 16 enum { - EVENT_CMD_COMPLETE = 0, + EVENT_CMD_RDY = 0, EVENT_XFER_COMPLETE, - EVENT_DATA_COMPLETE, + EVENT_NOTBUSY, EVENT_DATA_ERROR, }; enum atmel_mci_state { STATE_IDLE = 0, STATE_SENDING_CMD, - STATE_SENDING_DATA, - STATE_DATA_BUSY, + STATE_DATA_XFER, + STATE_WAITING_NOTBUSY, STATE_SENDING_STOP, - STATE_DATA_ERROR, + STATE_END_REQUEST, +}; + +enum atmci_xfer_dir { + XFER_RECEIVE = 0, + XFER_TRANSMIT, +}; + +enum atmci_pdc_buf { + PDC_FIRST_BUF = 0, + PDC_SECOND_BUF, +}; + +struct atmel_mci_caps { + bool has_dma_conf_reg; + bool has_pdc; + bool has_cfg_reg; + bool has_cstor_reg; + bool has_highspeed; + bool has_rwproof; + bool has_odd_clk_div; + bool has_bad_data_ordering; + bool need_reset_after_xfer; + bool need_blksz_mul_4; + bool need_notbusy_for_read_ops; }; struct atmel_mci_dma { -#ifdef CONFIG_MMC_ATMELMCI_DMA struct dma_chan *chan; struct dma_async_tx_descriptor *data_desc; -#endif }; /** * struct atmel_mci - MMC controller state shared between all slots * @lock: Spinlock protecting the queue and associated data. * @regs: Pointer to MMIO registers. - * @sg: Scatterlist entry currently being processed by PIO code, if any. + * @sg: Scatterlist entry currently being processed by PIO or PDC code. * @pio_offset: Offset into the current scatterlist entry. + * @buffer: Buffer used if we don't have the r/w proof capability. We + * don't have the time to switch pdc buffers so we have to use only + * one buffer for the full transaction. + * @buf_size: size of the buffer. + * @phys_buf_addr: buffer address needed for pdc. * @cur_slot: The slot which is currently using the controller. * @mrq: The request currently being processed on @cur_slot, * or NULL if the controller is idle. * @cmd: The command currently being sent to the card, or NULL. * @data: The data currently being transferred, or NULL if no data * transfer is in progress. + * @data_size: just data->blocks * data->blksz. * @dma: DMA client state. * @data_chan: DMA channel being used for the current data transfer. * @cmd_status: Snapshot of SR taken upon completion of the current @@ -94,6 +127,7 @@ struct atmel_mci_dma { * @queue: List of slots waiting for access to the controller. * @need_clock_update: Update the clock rate before the next request. * @need_reset: Reset controller before next request. + * @timer: Timer to balance the data timeout error flag which cannot rise. * @mode_reg: Value of the MR register. * @cfg_reg: Value of the CFG register. * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus @@ -102,6 +136,13 @@ struct atmel_mci_dma { * @mck: The peripheral bus clock hooked up to the MMC controller. * @pdev: Platform device associated with the MMC controller. * @slot: Slots sharing this MMC controller. + * @caps: MCI capabilities depending on MCI version. + * @prepare_data: function to setup MCI before data transfer which + * depends on MCI capabilities. + * @submit_data: function to start data transfer which depends on MCI + * capabilities. + * @stop_transfer: function to stop data transfer which depends on MCI + * capabilities. * * Locking * ======= @@ -126,7 +167,7 @@ struct atmel_mci_dma { * EVENT_DATA_COMPLETE is set in @pending_events, all data-related * interrupts must be disabled and @data_status updated with a * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the - * CMDRDY interupt must be disabled and @cmd_status updated with a + * CMDRDY interrupt must be disabled and @cmd_status updated with a * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the * bytes_xfered field of @data must be written. This is ensured by * using barriers. @@ -136,15 +177,21 @@ struct atmel_mci { void __iomem *regs; struct scatterlist *sg; + unsigned int sg_len; unsigned int pio_offset; + unsigned int *buffer; + unsigned int buf_size; + dma_addr_t buf_phys_addr; struct atmel_mci_slot *cur_slot; struct mmc_request *mrq; struct mmc_command *cmd; struct mmc_data *data; + unsigned int data_size; struct atmel_mci_dma dma; struct dma_chan *data_chan; + struct dma_slave_config dma_conf; u32 cmd_status; u32 data_status; @@ -158,6 +205,7 @@ struct atmel_mci { bool need_clock_update; bool need_reset; + struct timer_list timer; u32 mode_reg; u32 cfg_reg; unsigned long bus_hz; @@ -165,7 +213,13 @@ struct atmel_mci { struct clk *mck; struct platform_device *pdev; - struct atmel_mci_slot *slot[ATMEL_MCI_MAX_NR_SLOTS]; + struct atmel_mci_slot *slot[ATMCI_MAX_NR_SLOTS]; + + struct atmel_mci_caps caps; + + u32 (*prepare_data)(struct atmel_mci *host, struct mmc_data *data); + void (*submit_data)(struct atmel_mci *host, struct mmc_data *data); + void (*stop_transfer)(struct atmel_mci *host); }; /** @@ -218,31 +272,6 @@ struct atmel_mci_slot { set_bit(event, &host->pending_events) /* - * Enable or disable features/registers based on - * whether the processor supports them - */ -static bool mci_has_rwproof(void) -{ - if (cpu_is_at91sam9261() || cpu_is_at91rm9200()) - return false; - else - return true; -} - -/* - * The new MCI2 module isn't 100% compatible with the old MCI module, - * and it has a few nice features which we want to use... - */ -static inline bool atmci_is_mci2(void) -{ - if (cpu_is_at91sam9g45()) - return true; - - return false; -} - - -/* * The debugfs stuff below is mostly optimized away when * CONFIG_DEBUG_FS is not set. */ @@ -349,8 +378,10 @@ static int atmci_regs_show(struct seq_file *s, void *v) { struct atmel_mci *host = s->private; u32 *buf; + int ret = 0; + - buf = kmalloc(MCI_REGS_SIZE, GFP_KERNEL); + buf = kmalloc(ATMCI_REGS_SIZE, GFP_KERNEL); if (!buf) return -ENOMEM; @@ -359,54 +390,68 @@ static int atmci_regs_show(struct seq_file *s, void *v) * not disabling interrupts, so IMR and SR may not be * consistent. */ + ret = clk_prepare_enable(host->mck); + if (ret) + goto out; + spin_lock_bh(&host->lock); - clk_enable(host->mck); - memcpy_fromio(buf, host->regs, MCI_REGS_SIZE); - clk_disable(host->mck); + memcpy_fromio(buf, host->regs, ATMCI_REGS_SIZE); spin_unlock_bh(&host->lock); - seq_printf(s, "MR:\t0x%08x%s%s CLKDIV=%u\n", - buf[MCI_MR / 4], - buf[MCI_MR / 4] & MCI_MR_RDPROOF ? " RDPROOF" : "", - buf[MCI_MR / 4] & MCI_MR_WRPROOF ? " WRPROOF" : "", - buf[MCI_MR / 4] & 0xff); - seq_printf(s, "DTOR:\t0x%08x\n", buf[MCI_DTOR / 4]); - seq_printf(s, "SDCR:\t0x%08x\n", buf[MCI_SDCR / 4]); - seq_printf(s, "ARGR:\t0x%08x\n", buf[MCI_ARGR / 4]); + clk_disable_unprepare(host->mck); + + seq_printf(s, "MR:\t0x%08x%s%s ", + buf[ATMCI_MR / 4], + buf[ATMCI_MR / 4] & ATMCI_MR_RDPROOF ? " RDPROOF" : "", + buf[ATMCI_MR / 4] & ATMCI_MR_WRPROOF ? " WRPROOF" : ""); + if (host->caps.has_odd_clk_div) + seq_printf(s, "{CLKDIV,CLKODD}=%u\n", + ((buf[ATMCI_MR / 4] & 0xff) << 1) + | ((buf[ATMCI_MR / 4] >> 16) & 1)); + else + seq_printf(s, "CLKDIV=%u\n", + (buf[ATMCI_MR / 4] & 0xff)); + seq_printf(s, "DTOR:\t0x%08x\n", buf[ATMCI_DTOR / 4]); + seq_printf(s, "SDCR:\t0x%08x\n", buf[ATMCI_SDCR / 4]); + seq_printf(s, "ARGR:\t0x%08x\n", buf[ATMCI_ARGR / 4]); seq_printf(s, "BLKR:\t0x%08x BCNT=%u BLKLEN=%u\n", - buf[MCI_BLKR / 4], - buf[MCI_BLKR / 4] & 0xffff, - (buf[MCI_BLKR / 4] >> 16) & 0xffff); - if (atmci_is_mci2()) - seq_printf(s, "CSTOR:\t0x%08x\n", buf[MCI_CSTOR / 4]); + buf[ATMCI_BLKR / 4], + buf[ATMCI_BLKR / 4] & 0xffff, + (buf[ATMCI_BLKR / 4] >> 16) & 0xffff); + if (host->caps.has_cstor_reg) + seq_printf(s, "CSTOR:\t0x%08x\n", buf[ATMCI_CSTOR / 4]); /* Don't read RSPR and RDR; it will consume the data there */ - atmci_show_status_reg(s, "SR", buf[MCI_SR / 4]); - atmci_show_status_reg(s, "IMR", buf[MCI_IMR / 4]); + atmci_show_status_reg(s, "SR", buf[ATMCI_SR / 4]); + atmci_show_status_reg(s, "IMR", buf[ATMCI_IMR / 4]); - if (atmci_is_mci2()) { + if (host->caps.has_dma_conf_reg) { u32 val; - val = buf[MCI_DMA / 4]; + val = buf[ATMCI_DMA / 4]; seq_printf(s, "DMA:\t0x%08x OFFSET=%u CHKSIZE=%u%s\n", val, val & 3, ((val >> 4) & 3) ? 1 << (((val >> 4) & 3) + 1) : 1, - val & MCI_DMAEN ? " DMAEN" : ""); + val & ATMCI_DMAEN ? " DMAEN" : ""); + } + if (host->caps.has_cfg_reg) { + u32 val; - val = buf[MCI_CFG / 4]; + val = buf[ATMCI_CFG / 4]; seq_printf(s, "CFG:\t0x%08x%s%s%s%s\n", val, - val & MCI_CFG_FIFOMODE_1DATA ? " FIFOMODE_ONE_DATA" : "", - val & MCI_CFG_FERRCTRL_COR ? " FERRCTRL_CLEAR_ON_READ" : "", - val & MCI_CFG_HSMODE ? " HSMODE" : "", - val & MCI_CFG_LSYNC ? " LSYNC" : ""); + val & ATMCI_CFG_FIFOMODE_1DATA ? " FIFOMODE_ONE_DATA" : "", + val & ATMCI_CFG_FERRCTRL_COR ? " FERRCTRL_CLEAR_ON_READ" : "", + val & ATMCI_CFG_HSMODE ? " HSMODE" : "", + val & ATMCI_CFG_LSYNC ? " LSYNC" : ""); } +out: kfree(buf); - return 0; + return ret; } static int atmci_regs_open(struct inode *inode, struct file *file) @@ -464,10 +509,114 @@ err: dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n"); } -static inline unsigned int ns_to_clocks(struct atmel_mci *host, +#if defined(CONFIG_OF) +static const struct of_device_id atmci_dt_ids[] = { + { .compatible = "atmel,hsmci" }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, atmci_dt_ids); + +static struct mci_platform_data* +atmci_of_init(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct device_node *cnp; + struct mci_platform_data *pdata; + u32 slot_id; + + if (!np) { + dev_err(&pdev->dev, "device node not found\n"); + return ERR_PTR(-EINVAL); + } + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(&pdev->dev, "could not allocate memory for pdata\n"); + return ERR_PTR(-ENOMEM); + } + + for_each_child_of_node(np, cnp) { + if (of_property_read_u32(cnp, "reg", &slot_id)) { + dev_warn(&pdev->dev, "reg property is missing for %s\n", + cnp->full_name); + continue; + } + + if (slot_id >= ATMCI_MAX_NR_SLOTS) { + dev_warn(&pdev->dev, "can't have more than %d slots\n", + ATMCI_MAX_NR_SLOTS); + break; + } + + if (of_property_read_u32(cnp, "bus-width", + &pdata->slot[slot_id].bus_width)) + pdata->slot[slot_id].bus_width = 1; + + pdata->slot[slot_id].detect_pin = + of_get_named_gpio(cnp, "cd-gpios", 0); + + pdata->slot[slot_id].detect_is_active_high = + of_property_read_bool(cnp, "cd-inverted"); + + pdata->slot[slot_id].wp_pin = + of_get_named_gpio(cnp, "wp-gpios", 0); + } + + return pdata; +} +#else /* CONFIG_OF */ +static inline struct mci_platform_data* +atmci_of_init(struct platform_device *dev) +{ + return ERR_PTR(-EINVAL); +} +#endif + +static inline unsigned int atmci_get_version(struct atmel_mci *host) +{ + return atmci_readl(host, ATMCI_VERSION) & 0x00000fff; +} + +static void atmci_timeout_timer(unsigned long data) +{ + struct atmel_mci *host; + + host = (struct atmel_mci *)data; + + dev_dbg(&host->pdev->dev, "software timeout\n"); + + if (host->mrq->cmd->data) { + host->mrq->cmd->data->error = -ETIMEDOUT; + host->data = NULL; + /* + * With some SDIO modules, sometimes DMA transfer hangs. If + * stop_transfer() is not called then the DMA request is not + * removed, following ones are queued and never computed. + */ + if (host->state == STATE_DATA_XFER) + host->stop_transfer(host); + } else { + host->mrq->cmd->error = -ETIMEDOUT; + host->cmd = NULL; + } + host->need_reset = 1; + host->state = STATE_END_REQUEST; + smp_wmb(); + tasklet_schedule(&host->tasklet); +} + +static inline unsigned int atmci_ns_to_clocks(struct atmel_mci *host, unsigned int ns) { - return (ns * (host->bus_hz / 1000000) + 999) / 1000; + /* + * It is easier here to use us instead of ns for the timeout, + * it prevents from overflows during calculation. + */ + unsigned int us = DIV_ROUND_UP(ns, 1000); + + /* Maximum clock frequency is host->bus_hz/2 */ + return us * (DIV_ROUND_UP(host->bus_hz, 2000000)); } static void atmci_set_timeout(struct atmel_mci *host, @@ -480,7 +629,8 @@ static void atmci_set_timeout(struct atmel_mci *host, unsigned dtocyc; unsigned dtomul; - timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks; + timeout = atmci_ns_to_clocks(host, data->timeout_ns) + + data->timeout_clks; for (dtomul = 0; dtomul < 8; dtomul++) { unsigned shift = dtomul_to_shift[dtomul]; @@ -496,7 +646,7 @@ static void atmci_set_timeout(struct atmel_mci *host, dev_vdbg(&slot->mmc->class_dev, "setting timeout to %u cycles\n", dtocyc << dtomul_to_shift[dtomul]); - mci_writel(host, DTOR, (MCI_DTOMUL(dtomul) | MCI_DTOCYC(dtocyc))); + atmci_writel(host, ATMCI_DTOR, (ATMCI_DTOMUL(dtomul) | ATMCI_DTOCYC(dtocyc))); } /* @@ -510,13 +660,13 @@ static u32 atmci_prepare_command(struct mmc_host *mmc, cmd->error = -EINPROGRESS; - cmdr = MCI_CMDR_CMDNB(cmd->opcode); + cmdr = ATMCI_CMDR_CMDNB(cmd->opcode); if (cmd->flags & MMC_RSP_PRESENT) { if (cmd->flags & MMC_RSP_136) - cmdr |= MCI_CMDR_RSPTYP_136BIT; + cmdr |= ATMCI_CMDR_RSPTYP_136BIT; else - cmdr |= MCI_CMDR_RSPTYP_48BIT; + cmdr |= ATMCI_CMDR_RSPTYP_48BIT; } /* @@ -524,29 +674,34 @@ static u32 atmci_prepare_command(struct mmc_host *mmc, * it's too difficult to determine whether this is an ACMD or * not. Better make it 64. */ - cmdr |= MCI_CMDR_MAXLAT_64CYC; + cmdr |= ATMCI_CMDR_MAXLAT_64CYC; if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN) - cmdr |= MCI_CMDR_OPDCMD; + cmdr |= ATMCI_CMDR_OPDCMD; data = cmd->data; if (data) { - cmdr |= MCI_CMDR_START_XFER; - if (data->flags & MMC_DATA_STREAM) - cmdr |= MCI_CMDR_STREAM; - else if (data->blocks > 1) - cmdr |= MCI_CMDR_MULTI_BLOCK; - else - cmdr |= MCI_CMDR_BLOCK; + cmdr |= ATMCI_CMDR_START_XFER; + + if (cmd->opcode == SD_IO_RW_EXTENDED) { + cmdr |= ATMCI_CMDR_SDIO_BLOCK; + } else { + if (data->flags & MMC_DATA_STREAM) + cmdr |= ATMCI_CMDR_STREAM; + else if (data->blocks > 1) + cmdr |= ATMCI_CMDR_MULTI_BLOCK; + else + cmdr |= ATMCI_CMDR_BLOCK; + } if (data->flags & MMC_DATA_READ) - cmdr |= MCI_CMDR_TRDIR_READ; + cmdr |= ATMCI_CMDR_TRDIR_READ; } return cmdr; } -static void atmci_start_command(struct atmel_mci *host, +static void atmci_send_command(struct atmel_mci *host, struct mmc_command *cmd, u32 cmd_flags) { WARN_ON(host->cmd); @@ -556,42 +711,135 @@ static void atmci_start_command(struct atmel_mci *host, "start command: ARGR=0x%08x CMDR=0x%08x\n", cmd->arg, cmd_flags); - mci_writel(host, ARGR, cmd->arg); - mci_writel(host, CMDR, cmd_flags); + atmci_writel(host, ATMCI_ARGR, cmd->arg); + atmci_writel(host, ATMCI_CMDR, cmd_flags); } -static void send_stop_cmd(struct atmel_mci *host, struct mmc_data *data) +static void atmci_send_stop_cmd(struct atmel_mci *host, struct mmc_data *data) { - atmci_start_command(host, data->stop, host->stop_cmdr); - mci_writel(host, IER, MCI_CMDRDY); + dev_dbg(&host->pdev->dev, "send stop command\n"); + atmci_send_command(host, data->stop, host->stop_cmdr); + atmci_writel(host, ATMCI_IER, ATMCI_CMDRDY); } -#ifdef CONFIG_MMC_ATMELMCI_DMA -static void atmci_dma_cleanup(struct atmel_mci *host) +/* + * Configure given PDC buffer taking care of alignement issues. + * Update host->data_size and host->sg. + */ +static void atmci_pdc_set_single_buf(struct atmel_mci *host, + enum atmci_xfer_dir dir, enum atmci_pdc_buf buf_nb) { - struct mmc_data *data = host->data; + u32 pointer_reg, counter_reg; + unsigned int buf_size; - if (data) - dma_unmap_sg(&host->pdev->dev, data->sg, data->sg_len, - ((data->flags & MMC_DATA_WRITE) - ? DMA_TO_DEVICE : DMA_FROM_DEVICE)); + if (dir == XFER_RECEIVE) { + pointer_reg = ATMEL_PDC_RPR; + counter_reg = ATMEL_PDC_RCR; + } else { + pointer_reg = ATMEL_PDC_TPR; + counter_reg = ATMEL_PDC_TCR; + } + + if (buf_nb == PDC_SECOND_BUF) { + pointer_reg += ATMEL_PDC_SCND_BUF_OFF; + counter_reg += ATMEL_PDC_SCND_BUF_OFF; + } + + if (!host->caps.has_rwproof) { + buf_size = host->buf_size; + atmci_writel(host, pointer_reg, host->buf_phys_addr); + } else { + buf_size = sg_dma_len(host->sg); + atmci_writel(host, pointer_reg, sg_dma_address(host->sg)); + } + + if (host->data_size <= buf_size) { + if (host->data_size & 0x3) { + /* If size is different from modulo 4, transfer bytes */ + atmci_writel(host, counter_reg, host->data_size); + atmci_writel(host, ATMCI_MR, host->mode_reg | ATMCI_MR_PDCFBYTE); + } else { + /* Else transfer 32-bits words */ + atmci_writel(host, counter_reg, host->data_size / 4); + } + host->data_size = 0; + } else { + /* We assume the size of a page is 32-bits aligned */ + atmci_writel(host, counter_reg, sg_dma_len(host->sg) / 4); + host->data_size -= sg_dma_len(host->sg); + if (host->data_size) + host->sg = sg_next(host->sg); + } } -static void atmci_stop_dma(struct atmel_mci *host) +/* + * Configure PDC buffer according to the data size ie configuring one or two + * buffers. Don't use this function if you want to configure only the second + * buffer. In this case, use atmci_pdc_set_single_buf. + */ +static void atmci_pdc_set_both_buf(struct atmel_mci *host, int dir) { - struct dma_chan *chan = host->data_chan; + atmci_pdc_set_single_buf(host, dir, PDC_FIRST_BUF); + if (host->data_size) + atmci_pdc_set_single_buf(host, dir, PDC_SECOND_BUF); +} - if (chan) { - chan->device->device_control(chan, DMA_TERMINATE_ALL, 0); - atmci_dma_cleanup(host); - } else { - /* Data transfer was stopped by the interrupt handler */ - atmci_set_pending(host, EVENT_XFER_COMPLETE); - mci_writel(host, IER, MCI_NOTBUSY); +/* + * Unmap sg lists, called when transfer is finished. + */ +static void atmci_pdc_cleanup(struct atmel_mci *host) +{ + struct mmc_data *data = host->data; + + if (data) + dma_unmap_sg(&host->pdev->dev, + data->sg, data->sg_len, + ((data->flags & MMC_DATA_WRITE) + ? DMA_TO_DEVICE : DMA_FROM_DEVICE)); +} + +/* + * Disable PDC transfers. Update pending flags to EVENT_XFER_COMPLETE after + * having received ATMCI_TXBUFE or ATMCI_RXBUFF interrupt. Enable ATMCI_NOTBUSY + * interrupt needed for both transfer directions. + */ +static void atmci_pdc_complete(struct atmel_mci *host) +{ + int transfer_size = host->data->blocks * host->data->blksz; + int i; + + atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); + + if ((!host->caps.has_rwproof) + && (host->data->flags & MMC_DATA_READ)) { + if (host->caps.has_bad_data_ordering) + for (i = 0; i < transfer_size; i++) + host->buffer[i] = swab32(host->buffer[i]); + sg_copy_from_buffer(host->data->sg, host->data->sg_len, + host->buffer, transfer_size); } + + atmci_pdc_cleanup(host); + + dev_dbg(&host->pdev->dev, "(%s) set pending xfer complete\n", __func__); + atmci_set_pending(host, EVENT_XFER_COMPLETE); + tasklet_schedule(&host->tasklet); +} + +static void atmci_dma_cleanup(struct atmel_mci *host) +{ + struct mmc_data *data = host->data; + + if (data) + dma_unmap_sg(host->dma.chan->device->dev, + data->sg, data->sg_len, + ((data->flags & MMC_DATA_WRITE) + ? DMA_TO_DEVICE : DMA_FROM_DEVICE)); } -/* This function is called by the DMA driver from tasklet context. */ +/* + * This function is called by the DMA driver from tasklet context. + */ static void atmci_dma_complete(void *arg) { struct atmel_mci *host = arg; @@ -599,9 +847,9 @@ static void atmci_dma_complete(void *arg) dev_vdbg(&host->pdev->dev, "DMA complete\n"); - if (atmci_is_mci2()) + if (host->caps.has_dma_conf_reg) /* Disable DMA hardware handshaking on MCI */ - mci_writel(host, DMA, mci_readl(host, DMA) & ~MCI_DMAEN); + atmci_writel(host, ATMCI_DMA, atmci_readl(host, ATMCI_DMA) & ~ATMCI_DMAEN); atmci_dma_cleanup(host); @@ -610,6 +858,8 @@ static void atmci_dma_complete(void *arg) * to send the stop command or waiting for NBUSY in this case. */ if (data) { + dev_dbg(&host->pdev->dev, + "(%s) set pending xfer complete\n", __func__); atmci_set_pending(host, EVENT_XFER_COMPLETE); tasklet_schedule(&host->tasklet); @@ -633,11 +883,105 @@ static void atmci_dma_complete(void *arg) * completion callback" rule of the dma engine * framework. */ - mci_writel(host, IER, MCI_NOTBUSY); + atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); + } +} + +/* + * Returns a mask of interrupt flags to be enabled after the whole + * request has been prepared. + */ +static u32 atmci_prepare_data(struct atmel_mci *host, struct mmc_data *data) +{ + u32 iflags; + + data->error = -EINPROGRESS; + + host->sg = data->sg; + host->sg_len = data->sg_len; + host->data = data; + host->data_chan = NULL; + + iflags = ATMCI_DATA_ERROR_FLAGS; + + /* + * Errata: MMC data write operation with less than 12 + * bytes is impossible. + * + * Errata: MCI Transmit Data Register (TDR) FIFO + * corruption when length is not multiple of 4. + */ + if (data->blocks * data->blksz < 12 + || (data->blocks * data->blksz) & 3) + host->need_reset = true; + + host->pio_offset = 0; + if (data->flags & MMC_DATA_READ) + iflags |= ATMCI_RXRDY; + else + iflags |= ATMCI_TXRDY; + + return iflags; +} + +/* + * Set interrupt flags and set block length into the MCI mode register even + * if this value is also accessible in the MCI block register. It seems to be + * necessary before the High Speed MCI version. It also map sg and configure + * PDC registers. + */ +static u32 +atmci_prepare_data_pdc(struct atmel_mci *host, struct mmc_data *data) +{ + u32 iflags, tmp; + unsigned int sg_len; + enum dma_data_direction dir; + int i; + + data->error = -EINPROGRESS; + + host->data = data; + host->sg = data->sg; + iflags = ATMCI_DATA_ERROR_FLAGS; + + /* Enable pdc mode */ + atmci_writel(host, ATMCI_MR, host->mode_reg | ATMCI_MR_PDCMODE); + + if (data->flags & MMC_DATA_READ) { + dir = DMA_FROM_DEVICE; + iflags |= ATMCI_ENDRX | ATMCI_RXBUFF; + } else { + dir = DMA_TO_DEVICE; + iflags |= ATMCI_ENDTX | ATMCI_TXBUFE | ATMCI_BLKE; + } + + /* Set BLKLEN */ + tmp = atmci_readl(host, ATMCI_MR); + tmp &= 0x0000ffff; + tmp |= ATMCI_BLKLEN(data->blksz); + atmci_writel(host, ATMCI_MR, tmp); + + /* Configure PDC */ + host->data_size = data->blocks * data->blksz; + sg_len = dma_map_sg(&host->pdev->dev, data->sg, data->sg_len, dir); + + if ((!host->caps.has_rwproof) + && (host->data->flags & MMC_DATA_WRITE)) { + sg_copy_to_buffer(host->data->sg, host->data->sg_len, + host->buffer, host->data_size); + if (host->caps.has_bad_data_ordering) + for (i = 0; i < host->data_size; i++) + host->buffer[i] = swab32(host->buffer[i]); } + + if (host->data_size) + atmci_pdc_set_both_buf(host, + ((dir == DMA_FROM_DEVICE) ? XFER_RECEIVE : XFER_TRANSMIT)); + + return iflags; } -static int +static u32 atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) { struct dma_chan *chan; @@ -645,7 +989,18 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) struct scatterlist *sg; unsigned int i; enum dma_data_direction direction; + enum dma_transfer_direction slave_dirn; unsigned int sglen; + u32 maxburst; + u32 iflags; + + data->error = -EINPROGRESS; + + WARN_ON(host->data); + host->sg = NULL; + host->data = data; + + iflags = ATMCI_DATA_ERROR_FLAGS; /* * We don't do DMA on "complex" transfers, i.e. with @@ -653,13 +1008,13 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) * with all the DMA setup overhead for short transfers. */ if (data->blocks * data->blksz < ATMCI_DMA_THRESHOLD) - return -EINVAL; + return atmci_prepare_data(host, data); if (data->blksz & 3) - return -EINVAL; + return atmci_prepare_data(host, data); for_each_sg(data->sg, sg, data->sg_len, i) { if (sg->offset & 3 || sg->length & 3) - return -EINVAL; + return atmci_prepare_data(host, data); } /* If we don't have a channel, we can't do DMA */ @@ -670,19 +1025,26 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) if (!chan) return -ENODEV; - if (atmci_is_mci2()) - mci_writel(host, DMA, MCI_DMA_CHKSIZE(3) | MCI_DMAEN); - - if (data->flags & MMC_DATA_READ) + if (data->flags & MMC_DATA_READ) { direction = DMA_FROM_DEVICE; - else + host->dma_conf.direction = slave_dirn = DMA_DEV_TO_MEM; + maxburst = atmci_convert_chksize(host->dma_conf.src_maxburst); + } else { direction = DMA_TO_DEVICE; + host->dma_conf.direction = slave_dirn = DMA_MEM_TO_DEV; + maxburst = atmci_convert_chksize(host->dma_conf.dst_maxburst); + } - sglen = dma_map_sg(&host->pdev->dev, data->sg, data->sg_len, direction); - if (sglen != data->sg_len) - goto unmap_exit; - desc = chan->device->device_prep_slave_sg(chan, - data->sg, data->sg_len, direction, + if (host->caps.has_dma_conf_reg) + atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(maxburst) | + ATMCI_DMAEN); + + sglen = dma_map_sg(chan->device->dev, data->sg, + data->sg_len, direction); + + dmaengine_slave_config(chan, &host->dma_conf); + desc = dmaengine_prep_slave_sg(chan, + data->sg, sglen, slave_dirn, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) goto unmap_exit; @@ -691,81 +1053,78 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) desc->callback = atmci_dma_complete; desc->callback_param = host; - return 0; + return iflags; unmap_exit: - dma_unmap_sg(&host->pdev->dev, data->sg, sglen, direction); + dma_unmap_sg(chan->device->dev, data->sg, data->sg_len, direction); return -ENOMEM; } -static void atmci_submit_data(struct atmel_mci *host) +static void +atmci_submit_data(struct atmel_mci *host, struct mmc_data *data) +{ + return; +} + +/* + * Start PDC according to transfer direction. + */ +static void +atmci_submit_data_pdc(struct atmel_mci *host, struct mmc_data *data) +{ + if (data->flags & MMC_DATA_READ) + atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN); + else + atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN); +} + +static void +atmci_submit_data_dma(struct atmel_mci *host, struct mmc_data *data) { struct dma_chan *chan = host->data_chan; struct dma_async_tx_descriptor *desc = host->dma.data_desc; if (chan) { - desc->tx_submit(desc); - chan->device->device_issue_pending(chan); + dmaengine_submit(desc); + dma_async_issue_pending(chan); } } -#else /* CONFIG_MMC_ATMELMCI_DMA */ - -static int atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) -{ - return -ENOSYS; -} - -static void atmci_submit_data(struct atmel_mci *host) {} - -static void atmci_stop_dma(struct atmel_mci *host) +static void atmci_stop_transfer(struct atmel_mci *host) { - /* Data transfer was stopped by the interrupt handler */ + dev_dbg(&host->pdev->dev, + "(%s) set pending xfer complete\n", __func__); atmci_set_pending(host, EVENT_XFER_COMPLETE); - mci_writel(host, IER, MCI_NOTBUSY); + atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); } -#endif /* CONFIG_MMC_ATMELMCI_DMA */ - /* - * Returns a mask of interrupt flags to be enabled after the whole - * request has been prepared. + * Stop data transfer because error(s) occurred. */ -static u32 atmci_prepare_data(struct atmel_mci *host, struct mmc_data *data) +static void atmci_stop_transfer_pdc(struct atmel_mci *host) { - u32 iflags; - - data->error = -EINPROGRESS; - - WARN_ON(host->data); - host->sg = NULL; - host->data = data; - - iflags = ATMCI_DATA_ERROR_FLAGS; - if (atmci_prepare_data_dma(host, data)) { - host->data_chan = NULL; + atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); +} - /* - * Errata: MMC data write operation with less than 12 - * bytes is impossible. - * - * Errata: MCI Transmit Data Register (TDR) FIFO - * corruption when length is not multiple of 4. - */ - if (data->blocks * data->blksz < 12 - || (data->blocks * data->blksz) & 3) - host->need_reset = true; +static void atmci_stop_transfer_dma(struct atmel_mci *host) +{ + struct dma_chan *chan = host->data_chan; - host->sg = data->sg; - host->pio_offset = 0; - if (data->flags & MMC_DATA_READ) - iflags |= MCI_RXRDY; - else - iflags |= MCI_TXRDY; + if (chan) { + dmaengine_terminate_all(chan); + atmci_dma_cleanup(host); + } else { + /* Data transfer was stopped by the interrupt handler */ + dev_dbg(&host->pdev->dev, + "(%s) set pending xfer complete\n", __func__); + atmci_set_pending(host, EVENT_XFER_COMPLETE); + atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); } - - return iflags; } +/* + * Start a request: prepare data if needed, prepare the command and activate + * interrupts. + */ static void atmci_start_request(struct atmel_mci *host, struct atmel_mci_slot *slot) { @@ -781,27 +1140,33 @@ static void atmci_start_request(struct atmel_mci *host, host->pending_events = 0; host->completed_events = 0; + host->cmd_status = 0; host->data_status = 0; - if (host->need_reset) { - mci_writel(host, CR, MCI_CR_SWRST); - mci_writel(host, CR, MCI_CR_MCIEN); - mci_writel(host, MR, host->mode_reg); - if (atmci_is_mci2()) - mci_writel(host, CFG, host->cfg_reg); + dev_dbg(&host->pdev->dev, "start request: cmd %u\n", mrq->cmd->opcode); + + if (host->need_reset || host->caps.need_reset_after_xfer) { + iflags = atmci_readl(host, ATMCI_IMR); + iflags &= (ATMCI_SDIOIRQA | ATMCI_SDIOIRQB); + atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST); + atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN); + atmci_writel(host, ATMCI_MR, host->mode_reg); + if (host->caps.has_cfg_reg) + atmci_writel(host, ATMCI_CFG, host->cfg_reg); + atmci_writel(host, ATMCI_IER, iflags); host->need_reset = false; } - mci_writel(host, SDCR, slot->sdc_reg); + atmci_writel(host, ATMCI_SDCR, slot->sdc_reg); - iflags = mci_readl(host, IMR); - if (iflags & ~(MCI_SDIOIRQA | MCI_SDIOIRQB)) - dev_warn(&slot->mmc->class_dev, "WARNING: IMR=0x%08x\n", + iflags = atmci_readl(host, ATMCI_IMR); + if (iflags & ~(ATMCI_SDIOIRQA | ATMCI_SDIOIRQB)) + dev_dbg(&slot->mmc->class_dev, "WARNING: IMR=0x%08x\n", iflags); if (unlikely(test_and_clear_bit(ATMCI_CARD_NEED_INIT, &slot->flags))) { /* Send init sequence (74 clock cycles) */ - mci_writel(host, CMDR, MCI_CMDR_SPCMD_INIT); - while (!(mci_readl(host, SR) & MCI_CMDRDY)) + atmci_writel(host, ATMCI_CMDR, ATMCI_CMDR_SPCMD_INIT); + while (!(atmci_readl(host, ATMCI_SR) & ATMCI_CMDRDY)) cpu_relax(); } iflags = 0; @@ -810,31 +1175,42 @@ static void atmci_start_request(struct atmel_mci *host, atmci_set_timeout(host, slot, data); /* Must set block count/size before sending command */ - mci_writel(host, BLKR, MCI_BCNT(data->blocks) - | MCI_BLKLEN(data->blksz)); + atmci_writel(host, ATMCI_BLKR, ATMCI_BCNT(data->blocks) + | ATMCI_BLKLEN(data->blksz)); dev_vdbg(&slot->mmc->class_dev, "BLKR=0x%08x\n", - MCI_BCNT(data->blocks) | MCI_BLKLEN(data->blksz)); + ATMCI_BCNT(data->blocks) | ATMCI_BLKLEN(data->blksz)); - iflags |= atmci_prepare_data(host, data); + iflags |= host->prepare_data(host, data); } - iflags |= MCI_CMDRDY; + iflags |= ATMCI_CMDRDY; cmd = mrq->cmd; cmdflags = atmci_prepare_command(slot->mmc, cmd); - atmci_start_command(host, cmd, cmdflags); + + /* + * DMA transfer should be started before sending the command to avoid + * unexpected errors especially for read operations in SDIO mode. + * Unfortunately, in PDC mode, command has to be sent before starting + * the transfer. + */ + if (host->submit_data != &atmci_submit_data_dma) + atmci_send_command(host, cmd, cmdflags); if (data) - atmci_submit_data(host); + host->submit_data(host, data); + + if (host->submit_data == &atmci_submit_data_dma) + atmci_send_command(host, cmd, cmdflags); if (mrq->stop) { host->stop_cmdr = atmci_prepare_command(slot->mmc, mrq->stop); - host->stop_cmdr |= MCI_CMDR_STOP_XFER; + host->stop_cmdr |= ATMCI_CMDR_STOP_XFER; if (!(data->flags & MMC_DATA_WRITE)) - host->stop_cmdr |= MCI_CMDR_TRDIR_READ; + host->stop_cmdr |= ATMCI_CMDR_TRDIR_READ; if (data->flags & MMC_DATA_STREAM) - host->stop_cmdr |= MCI_CMDR_STREAM; + host->stop_cmdr |= ATMCI_CMDR_STREAM; else - host->stop_cmdr |= MCI_CMDR_MULTI_BLOCK; + host->stop_cmdr |= ATMCI_CMDR_MULTI_BLOCK; } /* @@ -843,7 +1219,9 @@ static void atmci_start_request(struct atmel_mci *host, * conditions (e.g. command and data complete, but stop not * prepared yet.) */ - mci_writel(host, IER, iflags); + atmci_writel(host, ATMCI_IER, iflags); + + mod_timer(&host->timer, jiffies + msecs_to_jiffies(2000)); } static void atmci_queue_request(struct atmel_mci *host, @@ -858,6 +1236,7 @@ static void atmci_queue_request(struct atmel_mci *host, host->state = STATE_SENDING_CMD; atmci_start_request(host, slot); } else { + dev_dbg(&host->pdev->dev, "queue request\n"); list_add_tail(&slot->queue_node, &host->queue); } spin_unlock_bh(&host->lock); @@ -870,6 +1249,7 @@ static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq) struct mmc_data *data; WARN_ON(slot->mrq); + dev_dbg(&host->pdev->dev, "MRQ: cmd %u\n", mrq->cmd->opcode); /* * We may "know" the card is gone even though there's still an @@ -900,14 +1280,15 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) struct atmel_mci_slot *slot = mmc_priv(mmc); struct atmel_mci *host = slot->host; unsigned int i; + bool unprepare_clk; - slot->sdc_reg &= ~MCI_SDCBUS_MASK; + slot->sdc_reg &= ~ATMCI_SDCBUS_MASK; switch (ios->bus_width) { case MMC_BUS_WIDTH_1: - slot->sdc_reg |= MCI_SDCBUS_1BIT; + slot->sdc_reg |= ATMCI_SDCBUS_1BIT; break; case MMC_BUS_WIDTH_4: - slot->sdc_reg |= MCI_SDCBUS_4BIT; + slot->sdc_reg |= ATMCI_SDCBUS_4BIT; break; } @@ -915,13 +1296,17 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) unsigned int clock_min = ~0U; u32 clkdiv; + clk_prepare(host->mck); + unprepare_clk = true; + spin_lock_bh(&host->lock); if (!host->mode_reg) { clk_enable(host->mck); - mci_writel(host, CR, MCI_CR_SWRST); - mci_writel(host, CR, MCI_CR_MCIEN); - if (atmci_is_mci2()) - mci_writel(host, CFG, host->cfg_reg); + unprepare_clk = false; + atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST); + atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN); + if (host->caps.has_cfg_reg) + atmci_writel(host, ATMCI_CFG, host->cfg_reg); } /* @@ -929,43 +1314,54 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) * core ios update when finding the minimum. */ slot->clock = ios->clock; - for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) { + for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { if (host->slot[i] && host->slot[i]->clock && host->slot[i]->clock < clock_min) clock_min = host->slot[i]->clock; } /* Calculate clock divider */ - clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * clock_min) - 1; - if (clkdiv > 255) { - dev_warn(&mmc->class_dev, - "clock %u too slow; using %lu\n", - clock_min, host->bus_hz / (2 * 256)); - clkdiv = 255; + if (host->caps.has_odd_clk_div) { + clkdiv = DIV_ROUND_UP(host->bus_hz, clock_min) - 2; + if (clkdiv > 511) { + dev_warn(&mmc->class_dev, + "clock %u too slow; using %lu\n", + clock_min, host->bus_hz / (511 + 2)); + clkdiv = 511; + } + host->mode_reg = ATMCI_MR_CLKDIV(clkdiv >> 1) + | ATMCI_MR_CLKODD(clkdiv & 1); + } else { + clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * clock_min) - 1; + if (clkdiv > 255) { + dev_warn(&mmc->class_dev, + "clock %u too slow; using %lu\n", + clock_min, host->bus_hz / (2 * 256)); + clkdiv = 255; + } + host->mode_reg = ATMCI_MR_CLKDIV(clkdiv); } - host->mode_reg = MCI_MR_CLKDIV(clkdiv); - /* * WRPROOF and RDPROOF prevent overruns/underruns by * stopping the clock when the FIFO is full/empty. * This state is not expected to last for long. */ - if (mci_has_rwproof()) - host->mode_reg |= (MCI_MR_WRPROOF | MCI_MR_RDPROOF); + if (host->caps.has_rwproof) + host->mode_reg |= (ATMCI_MR_WRPROOF | ATMCI_MR_RDPROOF); - if (atmci_is_mci2()) { + if (host->caps.has_cfg_reg) { /* setup High Speed mode in relation with card capacity */ if (ios->timing == MMC_TIMING_SD_HS) - host->cfg_reg |= MCI_CFG_HSMODE; + host->cfg_reg |= ATMCI_CFG_HSMODE; else - host->cfg_reg &= ~MCI_CFG_HSMODE; + host->cfg_reg &= ~ATMCI_CFG_HSMODE; } if (list_empty(&host->queue)) { - mci_writel(host, MR, host->mode_reg); - if (atmci_is_mci2()) - mci_writel(host, CFG, host->cfg_reg); + atmci_writel(host, ATMCI_MR, host->mode_reg); + if (host->caps.has_cfg_reg) + atmci_writel(host, ATMCI_CFG, host->cfg_reg); } else { host->need_clock_update = true; } @@ -974,28 +1370,40 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) } else { bool any_slot_active = false; + unprepare_clk = false; + spin_lock_bh(&host->lock); slot->clock = 0; - for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) { + for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { if (host->slot[i] && host->slot[i]->clock) { any_slot_active = true; break; } } if (!any_slot_active) { - mci_writel(host, CR, MCI_CR_MCIDIS); + atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS); if (host->mode_reg) { - mci_readl(host, MR); + atmci_readl(host, ATMCI_MR); clk_disable(host->mck); + unprepare_clk = true; } host->mode_reg = 0; } spin_unlock_bh(&host->lock); } + if (unprepare_clk) + clk_unprepare(host->mck); + switch (ios->power_mode) { + case MMC_POWER_OFF: + if (!IS_ERR(mmc->supply.vmmc)) + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); + break; case MMC_POWER_UP: set_bit(ATMCI_CARD_NEED_INIT, &slot->flags); + if (!IS_ERR(mmc->supply.vmmc)) + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd); break; default: /* @@ -1049,9 +1457,9 @@ static void atmci_enable_sdio_irq(struct mmc_host *mmc, int enable) struct atmel_mci *host = slot->host; if (enable) - mci_writel(host, IER, slot->sdio_irq); + atmci_writel(host, ATMCI_IER, slot->sdio_irq); else - mci_writel(host, IDR, slot->sdio_irq); + atmci_writel(host, ATMCI_IDR, slot->sdio_irq); } static const struct mmc_host_ops atmci_ops = { @@ -1075,12 +1483,12 @@ static void atmci_request_end(struct atmel_mci *host, struct mmc_request *mrq) /* * Update the MMC clock rate if necessary. This may be * necessary if set_ios() is called when a different slot is - * busy transfering data. + * busy transferring data. */ if (host->need_clock_update) { - mci_writel(host, MR, host->mode_reg); - if (atmci_is_mci2()) - mci_writel(host, CFG, host->cfg_reg); + atmci_writel(host, ATMCI_MR, host->mode_reg); + if (host->caps.has_cfg_reg) + atmci_writel(host, ATMCI_CFG, host->cfg_reg); } host->cur_slot->mrq = NULL; @@ -1098,6 +1506,8 @@ static void atmci_request_end(struct atmel_mci *host, struct mmc_request *mrq) host->state = STATE_IDLE; } + del_timer(&host->timer); + spin_unlock(&host->lock); mmc_request_done(prev_mmc, mrq); spin_lock(&host->lock); @@ -1109,32 +1519,24 @@ static void atmci_command_complete(struct atmel_mci *host, u32 status = host->cmd_status; /* Read the response from the card (up to 16 bytes) */ - cmd->resp[0] = mci_readl(host, RSPR); - cmd->resp[1] = mci_readl(host, RSPR); - cmd->resp[2] = mci_readl(host, RSPR); - cmd->resp[3] = mci_readl(host, RSPR); + cmd->resp[0] = atmci_readl(host, ATMCI_RSPR); + cmd->resp[1] = atmci_readl(host, ATMCI_RSPR); + cmd->resp[2] = atmci_readl(host, ATMCI_RSPR); + cmd->resp[3] = atmci_readl(host, ATMCI_RSPR); - if (status & MCI_RTOE) + if (status & ATMCI_RTOE) cmd->error = -ETIMEDOUT; - else if ((cmd->flags & MMC_RSP_CRC) && (status & MCI_RCRCE)) + else if ((cmd->flags & MMC_RSP_CRC) && (status & ATMCI_RCRCE)) cmd->error = -EILSEQ; - else if (status & (MCI_RINDE | MCI_RDIRE | MCI_RENDE)) + else if (status & (ATMCI_RINDE | ATMCI_RDIRE | ATMCI_RENDE)) cmd->error = -EIO; - else - cmd->error = 0; - - if (cmd->error) { - dev_dbg(&host->pdev->dev, - "command error: status=0x%08x\n", status); - - if (cmd->data) { - atmci_stop_dma(host); - host->data = NULL; - mci_writel(host, IDR, MCI_NOTBUSY - | MCI_TXRDY | MCI_RXRDY - | ATMCI_DATA_ERROR_FLAGS); + else if (host->mrq->data && (host->mrq->data->blksz & 3)) { + if (host->caps.need_blksz_mul_4) { + cmd->error = -EINVAL; + host->need_reset = 1; } - } + } else + cmd->error = 0; } static void atmci_detect_change(unsigned long data) @@ -1183,11 +1585,11 @@ static void atmci_detect_change(unsigned long data) * Reset controller to terminate any ongoing * commands or data transfers. */ - mci_writel(host, CR, MCI_CR_SWRST); - mci_writel(host, CR, MCI_CR_MCIEN); - mci_writel(host, MR, host->mode_reg); - if (atmci_is_mci2()) - mci_writel(host, CFG, host->cfg_reg); + atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST); + atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN); + atmci_writel(host, ATMCI_MR, host->mode_reg); + if (host->caps.has_cfg_reg) + atmci_writel(host, ATMCI_CFG, host->cfg_reg); host->data = NULL; host->cmd = NULL; @@ -1197,23 +1599,21 @@ static void atmci_detect_change(unsigned long data) break; case STATE_SENDING_CMD: mrq->cmd->error = -ENOMEDIUM; - if (!mrq->data) - break; - /* fall through */ - case STATE_SENDING_DATA: + if (mrq->data) + host->stop_transfer(host); + break; + case STATE_DATA_XFER: + mrq->data->error = -ENOMEDIUM; + host->stop_transfer(host); + break; + case STATE_WAITING_NOTBUSY: mrq->data->error = -ENOMEDIUM; - atmci_stop_dma(host); break; - case STATE_DATA_BUSY: - case STATE_DATA_ERROR: - if (mrq->data->error == -EINPROGRESS) - mrq->data->error = -ENOMEDIUM; - if (!mrq->stop) - break; - /* fall through */ case STATE_SENDING_STOP: mrq->stop->error = -ENOMEDIUM; break; + case STATE_END_REQUEST: + break; } atmci_request_end(host, mrq); @@ -1241,7 +1641,6 @@ static void atmci_tasklet_func(unsigned long priv) struct atmel_mci *host = (struct atmel_mci *)priv; struct mmc_request *mrq = host->mrq; struct mmc_data *data = host->data; - struct mmc_command *cmd = host->cmd; enum atmel_mci_state state = host->state; enum atmel_mci_state prev_state; u32 status; @@ -1253,111 +1652,193 @@ static void atmci_tasklet_func(unsigned long priv) dev_vdbg(&host->pdev->dev, "tasklet: state %u pending/completed/mask %lx/%lx/%x\n", state, host->pending_events, host->completed_events, - mci_readl(host, IMR)); + atmci_readl(host, ATMCI_IMR)); do { prev_state = state; + dev_dbg(&host->pdev->dev, "FSM: state=%d\n", state); switch (state) { case STATE_IDLE: break; case STATE_SENDING_CMD: + /* + * Command has been sent, we are waiting for command + * ready. Then we have three next states possible: + * END_REQUEST by default, WAITING_NOTBUSY if it's a + * command needing it or DATA_XFER if there is data. + */ + dev_dbg(&host->pdev->dev, "FSM: cmd ready?\n"); if (!atmci_test_and_clear_pending(host, - EVENT_CMD_COMPLETE)) + EVENT_CMD_RDY)) break; + dev_dbg(&host->pdev->dev, "set completed cmd ready\n"); host->cmd = NULL; - atmci_set_completed(host, EVENT_CMD_COMPLETE); + atmci_set_completed(host, EVENT_CMD_RDY); atmci_command_complete(host, mrq->cmd); - if (!mrq->data || cmd->error) { - atmci_request_end(host, host->mrq); - goto unlock; - } + if (mrq->data) { + dev_dbg(&host->pdev->dev, + "command with data transfer"); + /* + * If there is a command error don't start + * data transfer. + */ + if (mrq->cmd->error) { + host->stop_transfer(host); + host->data = NULL; + atmci_writel(host, ATMCI_IDR, + ATMCI_TXRDY | ATMCI_RXRDY + | ATMCI_DATA_ERROR_FLAGS); + state = STATE_END_REQUEST; + } else + state = STATE_DATA_XFER; + } else if ((!mrq->data) && (mrq->cmd->flags & MMC_RSP_BUSY)) { + dev_dbg(&host->pdev->dev, + "command response need waiting notbusy"); + atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); + state = STATE_WAITING_NOTBUSY; + } else + state = STATE_END_REQUEST; - prev_state = state = STATE_SENDING_DATA; - /* fall through */ + break; - case STATE_SENDING_DATA: + case STATE_DATA_XFER: if (atmci_test_and_clear_pending(host, EVENT_DATA_ERROR)) { - atmci_stop_dma(host); - if (data->stop) - send_stop_cmd(host, data); - state = STATE_DATA_ERROR; + dev_dbg(&host->pdev->dev, "set completed data error\n"); + atmci_set_completed(host, EVENT_DATA_ERROR); + state = STATE_END_REQUEST; break; } + /* + * A data transfer is in progress. The event expected + * to move to the next state depends of data transfer + * type (PDC or DMA). Once transfer done we can move + * to the next step which is WAITING_NOTBUSY in write + * case and directly SENDING_STOP in read case. + */ + dev_dbg(&host->pdev->dev, "FSM: xfer complete?\n"); if (!atmci_test_and_clear_pending(host, EVENT_XFER_COMPLETE)) break; + dev_dbg(&host->pdev->dev, + "(%s) set completed xfer complete\n", + __func__); atmci_set_completed(host, EVENT_XFER_COMPLETE); - prev_state = state = STATE_DATA_BUSY; - /* fall through */ - - case STATE_DATA_BUSY: - if (!atmci_test_and_clear_pending(host, - EVENT_DATA_COMPLETE)) - break; - host->data = NULL; - atmci_set_completed(host, EVENT_DATA_COMPLETE); - status = host->data_status; - if (unlikely(status & ATMCI_DATA_ERROR_FLAGS)) { - if (status & MCI_DTOE) { - dev_dbg(&host->pdev->dev, - "data timeout error\n"); - data->error = -ETIMEDOUT; - } else if (status & MCI_DCRCE) { - dev_dbg(&host->pdev->dev, - "data CRC error\n"); - data->error = -EILSEQ; - } else { - dev_dbg(&host->pdev->dev, - "data FIFO error (status=%08x)\n", - status); - data->error = -EIO; - } + if (host->caps.need_notbusy_for_read_ops || + (host->data->flags & MMC_DATA_WRITE)) { + atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); + state = STATE_WAITING_NOTBUSY; + } else if (host->mrq->stop) { + atmci_writel(host, ATMCI_IER, ATMCI_CMDRDY); + atmci_send_stop_cmd(host, data); + state = STATE_SENDING_STOP; } else { + host->data = NULL; data->bytes_xfered = data->blocks * data->blksz; data->error = 0; - mci_writel(host, IDR, ATMCI_DATA_ERROR_FLAGS); + state = STATE_END_REQUEST; } + break; - if (!data->stop) { - atmci_request_end(host, host->mrq); - goto unlock; - } + case STATE_WAITING_NOTBUSY: + /* + * We can be in the state for two reasons: a command + * requiring waiting not busy signal (stop command + * included) or a write operation. In the latest case, + * we need to send a stop command. + */ + dev_dbg(&host->pdev->dev, "FSM: not busy?\n"); + if (!atmci_test_and_clear_pending(host, + EVENT_NOTBUSY)) + break; - prev_state = state = STATE_SENDING_STOP; - if (!data->error) - send_stop_cmd(host, data); - /* fall through */ + dev_dbg(&host->pdev->dev, "set completed not busy\n"); + atmci_set_completed(host, EVENT_NOTBUSY); + + if (host->data) { + /* + * For some commands such as CMD53, even if + * there is data transfer, there is no stop + * command to send. + */ + if (host->mrq->stop) { + atmci_writel(host, ATMCI_IER, + ATMCI_CMDRDY); + atmci_send_stop_cmd(host, data); + state = STATE_SENDING_STOP; + } else { + host->data = NULL; + data->bytes_xfered = data->blocks + * data->blksz; + data->error = 0; + state = STATE_END_REQUEST; + } + } else + state = STATE_END_REQUEST; + break; case STATE_SENDING_STOP: + /* + * In this state, it is important to set host->data to + * NULL (which is tested in the waiting notbusy state) + * in order to go to the end request state instead of + * sending stop again. + */ + dev_dbg(&host->pdev->dev, "FSM: cmd ready?\n"); if (!atmci_test_and_clear_pending(host, - EVENT_CMD_COMPLETE)) + EVENT_CMD_RDY)) break; + dev_dbg(&host->pdev->dev, "FSM: cmd ready\n"); host->cmd = NULL; + data->bytes_xfered = data->blocks * data->blksz; + data->error = 0; atmci_command_complete(host, mrq->stop); - atmci_request_end(host, host->mrq); - goto unlock; + if (mrq->stop->error) { + host->stop_transfer(host); + atmci_writel(host, ATMCI_IDR, + ATMCI_TXRDY | ATMCI_RXRDY + | ATMCI_DATA_ERROR_FLAGS); + state = STATE_END_REQUEST; + } else { + atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); + state = STATE_WAITING_NOTBUSY; + } + host->data = NULL; + break; - case STATE_DATA_ERROR: - if (!atmci_test_and_clear_pending(host, - EVENT_XFER_COMPLETE)) - break; + case STATE_END_REQUEST: + atmci_writel(host, ATMCI_IDR, ATMCI_TXRDY | ATMCI_RXRDY + | ATMCI_DATA_ERROR_FLAGS); + status = host->data_status; + if (unlikely(status)) { + host->stop_transfer(host); + host->data = NULL; + if (data) { + if (status & ATMCI_DTOE) { + data->error = -ETIMEDOUT; + } else if (status & ATMCI_DCRCE) { + data->error = -EILSEQ; + } else { + data->error = -EIO; + } + } + } - state = STATE_DATA_BUSY; + atmci_request_end(host, host->mrq); + state = STATE_IDLE; break; } } while (state != prev_state); host->state = state; -unlock: spin_unlock(&host->lock); } @@ -1372,7 +1853,7 @@ static void atmci_read_data_pio(struct atmel_mci *host) unsigned int nbytes = 0; do { - value = mci_readl(host, RDR); + value = atmci_readl(host, ATMCI_RDR); if (likely(offset + 4 <= sg->length)) { put_unaligned(value, (u32 *)(buf + offset)); @@ -1382,7 +1863,8 @@ static void atmci_read_data_pio(struct atmel_mci *host) if (offset == sg->length) { flush_dcache_page(sg_page(sg)); host->sg = sg = sg_next(sg); - if (!sg) + host->sg_len--; + if (!sg || !host->sg_len) goto done; offset = 0; @@ -1395,7 +1877,8 @@ static void atmci_read_data_pio(struct atmel_mci *host) flush_dcache_page(sg_page(sg)); host->sg = sg = sg_next(sg); - if (!sg) + host->sg_len--; + if (!sg || !host->sg_len) goto done; offset = 4 - remaining; @@ -1404,18 +1887,15 @@ static void atmci_read_data_pio(struct atmel_mci *host) nbytes += offset; } - status = mci_readl(host, SR); + status = atmci_readl(host, ATMCI_SR); if (status & ATMCI_DATA_ERROR_FLAGS) { - mci_writel(host, IDR, (MCI_NOTBUSY | MCI_RXRDY + atmci_writel(host, ATMCI_IDR, (ATMCI_NOTBUSY | ATMCI_RXRDY | ATMCI_DATA_ERROR_FLAGS)); host->data_status = status; data->bytes_xfered += nbytes; - smp_wmb(); - atmci_set_pending(host, EVENT_DATA_ERROR); - tasklet_schedule(&host->tasklet); return; } - } while (status & MCI_RXRDY); + } while (status & ATMCI_RXRDY); host->pio_offset = offset; data->bytes_xfered += nbytes; @@ -1423,8 +1903,8 @@ static void atmci_read_data_pio(struct atmel_mci *host) return; done: - mci_writel(host, IDR, MCI_RXRDY); - mci_writel(host, IER, MCI_NOTBUSY); + atmci_writel(host, ATMCI_IDR, ATMCI_RXRDY); + atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); data->bytes_xfered += nbytes; smp_wmb(); atmci_set_pending(host, EVENT_XFER_COMPLETE); @@ -1443,13 +1923,14 @@ static void atmci_write_data_pio(struct atmel_mci *host) do { if (likely(offset + 4 <= sg->length)) { value = get_unaligned((u32 *)(buf + offset)); - mci_writel(host, TDR, value); + atmci_writel(host, ATMCI_TDR, value); offset += 4; nbytes += 4; if (offset == sg->length) { host->sg = sg = sg_next(sg); - if (!sg) + host->sg_len--; + if (!sg || !host->sg_len) goto done; offset = 0; @@ -1463,30 +1944,28 @@ static void atmci_write_data_pio(struct atmel_mci *host) nbytes += remaining; host->sg = sg = sg_next(sg); - if (!sg) { - mci_writel(host, TDR, value); + host->sg_len--; + if (!sg || !host->sg_len) { + atmci_writel(host, ATMCI_TDR, value); goto done; } offset = 4 - remaining; buf = sg_virt(sg); memcpy((u8 *)&value + remaining, buf, offset); - mci_writel(host, TDR, value); + atmci_writel(host, ATMCI_TDR, value); nbytes += offset; } - status = mci_readl(host, SR); + status = atmci_readl(host, ATMCI_SR); if (status & ATMCI_DATA_ERROR_FLAGS) { - mci_writel(host, IDR, (MCI_NOTBUSY | MCI_TXRDY + atmci_writel(host, ATMCI_IDR, (ATMCI_NOTBUSY | ATMCI_TXRDY | ATMCI_DATA_ERROR_FLAGS)); host->data_status = status; data->bytes_xfered += nbytes; - smp_wmb(); - atmci_set_pending(host, EVENT_DATA_ERROR); - tasklet_schedule(&host->tasklet); return; } - } while (status & MCI_TXRDY); + } while (status & ATMCI_TXRDY); host->pio_offset = offset; data->bytes_xfered += nbytes; @@ -1494,28 +1973,18 @@ static void atmci_write_data_pio(struct atmel_mci *host) return; done: - mci_writel(host, IDR, MCI_TXRDY); - mci_writel(host, IER, MCI_NOTBUSY); + atmci_writel(host, ATMCI_IDR, ATMCI_TXRDY); + atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); data->bytes_xfered += nbytes; smp_wmb(); atmci_set_pending(host, EVENT_XFER_COMPLETE); } -static void atmci_cmd_interrupt(struct atmel_mci *host, u32 status) -{ - mci_writel(host, IDR, MCI_CMDRDY); - - host->cmd_status = status; - smp_wmb(); - atmci_set_pending(host, EVENT_CMD_COMPLETE); - tasklet_schedule(&host->tasklet); -} - static void atmci_sdio_interrupt(struct atmel_mci *host, u32 status) { int i; - for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) { + for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { struct atmel_mci_slot *slot = host->slot[i]; if (slot && (status & slot->sdio_irq)) { mmc_signal_sdio_irq(slot->mmc); @@ -1531,40 +2000,120 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id) unsigned int pass_count = 0; do { - status = mci_readl(host, SR); - mask = mci_readl(host, IMR); + status = atmci_readl(host, ATMCI_SR); + mask = atmci_readl(host, ATMCI_IMR); pending = status & mask; if (!pending) break; if (pending & ATMCI_DATA_ERROR_FLAGS) { - mci_writel(host, IDR, ATMCI_DATA_ERROR_FLAGS - | MCI_RXRDY | MCI_TXRDY); - pending &= mci_readl(host, IMR); + dev_dbg(&host->pdev->dev, "IRQ: data error\n"); + atmci_writel(host, ATMCI_IDR, ATMCI_DATA_ERROR_FLAGS + | ATMCI_RXRDY | ATMCI_TXRDY + | ATMCI_ENDRX | ATMCI_ENDTX + | ATMCI_RXBUFF | ATMCI_TXBUFE); host->data_status = status; + dev_dbg(&host->pdev->dev, "set pending data error\n"); smp_wmb(); atmci_set_pending(host, EVENT_DATA_ERROR); tasklet_schedule(&host->tasklet); } - if (pending & MCI_NOTBUSY) { - mci_writel(host, IDR, - ATMCI_DATA_ERROR_FLAGS | MCI_NOTBUSY); - if (!host->data_status) - host->data_status = status; + + if (pending & ATMCI_TXBUFE) { + dev_dbg(&host->pdev->dev, "IRQ: tx buffer empty\n"); + atmci_writel(host, ATMCI_IDR, ATMCI_TXBUFE); + atmci_writel(host, ATMCI_IDR, ATMCI_ENDTX); + /* + * We can receive this interruption before having configured + * the second pdc buffer, so we need to reconfigure first and + * second buffers again + */ + if (host->data_size) { + atmci_pdc_set_both_buf(host, XFER_TRANSMIT); + atmci_writel(host, ATMCI_IER, ATMCI_ENDTX); + atmci_writel(host, ATMCI_IER, ATMCI_TXBUFE); + } else { + atmci_pdc_complete(host); + } + } else if (pending & ATMCI_ENDTX) { + dev_dbg(&host->pdev->dev, "IRQ: end of tx buffer\n"); + atmci_writel(host, ATMCI_IDR, ATMCI_ENDTX); + + if (host->data_size) { + atmci_pdc_set_single_buf(host, + XFER_TRANSMIT, PDC_SECOND_BUF); + atmci_writel(host, ATMCI_IER, ATMCI_ENDTX); + } + } + + if (pending & ATMCI_RXBUFF) { + dev_dbg(&host->pdev->dev, "IRQ: rx buffer full\n"); + atmci_writel(host, ATMCI_IDR, ATMCI_RXBUFF); + atmci_writel(host, ATMCI_IDR, ATMCI_ENDRX); + /* + * We can receive this interruption before having configured + * the second pdc buffer, so we need to reconfigure first and + * second buffers again + */ + if (host->data_size) { + atmci_pdc_set_both_buf(host, XFER_RECEIVE); + atmci_writel(host, ATMCI_IER, ATMCI_ENDRX); + atmci_writel(host, ATMCI_IER, ATMCI_RXBUFF); + } else { + atmci_pdc_complete(host); + } + } else if (pending & ATMCI_ENDRX) { + dev_dbg(&host->pdev->dev, "IRQ: end of rx buffer\n"); + atmci_writel(host, ATMCI_IDR, ATMCI_ENDRX); + + if (host->data_size) { + atmci_pdc_set_single_buf(host, + XFER_RECEIVE, PDC_SECOND_BUF); + atmci_writel(host, ATMCI_IER, ATMCI_ENDRX); + } + } + + /* + * First mci IPs, so mainly the ones having pdc, have some + * issues with the notbusy signal. You can't get it after + * data transmission if you have not sent a stop command. + * The appropriate workaround is to use the BLKE signal. + */ + if (pending & ATMCI_BLKE) { + dev_dbg(&host->pdev->dev, "IRQ: blke\n"); + atmci_writel(host, ATMCI_IDR, ATMCI_BLKE); smp_wmb(); - atmci_set_pending(host, EVENT_DATA_COMPLETE); + dev_dbg(&host->pdev->dev, "set pending notbusy\n"); + atmci_set_pending(host, EVENT_NOTBUSY); tasklet_schedule(&host->tasklet); } - if (pending & MCI_RXRDY) + + if (pending & ATMCI_NOTBUSY) { + dev_dbg(&host->pdev->dev, "IRQ: not_busy\n"); + atmci_writel(host, ATMCI_IDR, ATMCI_NOTBUSY); + smp_wmb(); + dev_dbg(&host->pdev->dev, "set pending notbusy\n"); + atmci_set_pending(host, EVENT_NOTBUSY); + tasklet_schedule(&host->tasklet); + } + + if (pending & ATMCI_RXRDY) atmci_read_data_pio(host); - if (pending & MCI_TXRDY) + if (pending & ATMCI_TXRDY) atmci_write_data_pio(host); - if (pending & MCI_CMDRDY) - atmci_cmd_interrupt(host, status); + if (pending & ATMCI_CMDRDY) { + dev_dbg(&host->pdev->dev, "IRQ: cmd ready\n"); + atmci_writel(host, ATMCI_IDR, ATMCI_CMDRDY); + host->cmd_status = status; + smp_wmb(); + dev_dbg(&host->pdev->dev, "set pending cmd rdy\n"); + atmci_set_pending(host, EVENT_CMD_RDY); + tasklet_schedule(&host->tasklet); + } - if (pending & (MCI_SDIOIRQA | MCI_SDIOIRQB)) + if (pending & (ATMCI_SDIOIRQA | ATMCI_SDIOIRQB)) atmci_sdio_interrupt(host, status); } while (pass_count++ < 5); @@ -1607,21 +2156,41 @@ static int __init atmci_init_slot(struct atmel_mci *host, slot->sdc_reg = sdc_reg; slot->sdio_irq = sdio_irq; + dev_dbg(&mmc->class_dev, + "slot[%u]: bus_width=%u, detect_pin=%d, " + "detect_is_active_high=%s, wp_pin=%d\n", + id, slot_data->bus_width, slot_data->detect_pin, + slot_data->detect_is_active_high ? "true" : "false", + slot_data->wp_pin); + mmc->ops = &atmci_ops; mmc->f_min = DIV_ROUND_UP(host->bus_hz, 512); mmc->f_max = host->bus_hz / 2; mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; if (sdio_irq) mmc->caps |= MMC_CAP_SDIO_IRQ; - if (atmci_is_mci2()) + if (host->caps.has_highspeed) mmc->caps |= MMC_CAP_SD_HIGHSPEED; - if (slot_data->bus_width >= 4) + /* + * Without the read/write proof capability, it is strongly suggested to + * use only one bit for data to prevent fifo underruns and overruns + * which will corrupt data. + */ + if ((slot_data->bus_width >= 4) && host->caps.has_rwproof) mmc->caps |= MMC_CAP_4_BIT_DATA; - mmc->max_segs = 64; - mmc->max_req_size = 32768 * 512; - mmc->max_blk_size = 32768; - mmc->max_blk_count = 512; + if (atmci_get_version(host) < 0x200) { + mmc->max_segs = 256; + mmc->max_blk_size = 4095; + mmc->max_blk_count = 256; + mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; + mmc->max_seg_size = mmc->max_blk_size * mmc->max_segs; + } else { + mmc->max_segs = 64; + mmc->max_req_size = 32768 * 512; + mmc->max_blk_size = 32768; + mmc->max_blk_count = 512; + } /* Assume card is present initially */ set_bit(ATMCI_CARD_PRESENT, &slot->flags); @@ -1646,6 +2215,7 @@ static int __init atmci_init_slot(struct atmel_mci *host, } host->slot[id] = slot; + mmc_regulator_get_supply(mmc); mmc_add_host(mmc); if (gpio_is_valid(slot->detect_pin)) { @@ -1696,11 +2266,15 @@ static void __exit atmci_cleanup_slot(struct atmel_mci_slot *slot, mmc_free_host(slot->mmc); } -#ifdef CONFIG_MMC_ATMELMCI_DMA -static bool filter(struct dma_chan *chan, void *slave) +static bool atmci_filter(struct dma_chan *chan, void *pdata) { - struct mci_dma_data *sl = slave; + struct mci_platform_data *sl_pdata = pdata; + struct mci_dma_data *sl; + + if (!sl_pdata) + return false; + sl = sl_pdata->dma_slave; if (sl && find_slave_dev(sl) == chan->device->dev) { chan->private = slave_data_ptr(sl); return true; @@ -1709,38 +2283,92 @@ static bool filter(struct dma_chan *chan, void *slave) } } -static void atmci_configure_dma(struct atmel_mci *host) +static bool atmci_configure_dma(struct atmel_mci *host) { struct mci_platform_data *pdata; + dma_cap_mask_t mask; if (host == NULL) - return; + return false; pdata = host->pdev->dev.platform_data; - if (pdata && find_slave_dev(pdata->dma_slave)) { - dma_cap_mask_t mask; + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); - setup_dma_addr(pdata->dma_slave, - host->mapbase + MCI_TDR, - host->mapbase + MCI_RDR); - - /* Try to grab a DMA channel */ - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - host->dma.chan = - dma_request_channel(mask, filter, pdata->dma_slave); - } - if (!host->dma.chan) - dev_notice(&host->pdev->dev, "DMA not available, using PIO\n"); - else + host->dma.chan = dma_request_slave_channel_compat(mask, atmci_filter, pdata, + &host->pdev->dev, "rxtx"); + if (!host->dma.chan) { + dev_warn(&host->pdev->dev, "no DMA channel available\n"); + return false; + } else { dev_info(&host->pdev->dev, - "Using %s for DMA transfers\n", + "using %s for DMA transfers\n", dma_chan_name(host->dma.chan)); + + host->dma_conf.src_addr = host->mapbase + ATMCI_RDR; + host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + host->dma_conf.src_maxburst = 1; + host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR; + host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + host->dma_conf.dst_maxburst = 1; + host->dma_conf.device_fc = false; + return true; + } +} + +/* + * HSMCI (High Speed MCI) module is not fully compatible with MCI module. + * HSMCI provides DMA support and a new config register but no more supports + * PDC. + */ +static void __init atmci_get_cap(struct atmel_mci *host) +{ + unsigned int version; + + version = atmci_get_version(host); + dev_info(&host->pdev->dev, + "version: 0x%x\n", version); + + host->caps.has_dma_conf_reg = 0; + host->caps.has_pdc = ATMCI_PDC_CONNECTED; + host->caps.has_cfg_reg = 0; + host->caps.has_cstor_reg = 0; + host->caps.has_highspeed = 0; + host->caps.has_rwproof = 0; + host->caps.has_odd_clk_div = 0; + host->caps.has_bad_data_ordering = 1; + host->caps.need_reset_after_xfer = 1; + host->caps.need_blksz_mul_4 = 1; + host->caps.need_notbusy_for_read_ops = 0; + + /* keep only major version number */ + switch (version & 0xf00) { + case 0x500: + host->caps.has_odd_clk_div = 1; + case 0x400: + case 0x300: + host->caps.has_dma_conf_reg = 1; + host->caps.has_pdc = 0; + host->caps.has_cfg_reg = 1; + host->caps.has_cstor_reg = 1; + host->caps.has_highspeed = 1; + case 0x200: + host->caps.has_rwproof = 1; + host->caps.need_blksz_mul_4 = 0; + host->caps.need_notbusy_for_read_ops = 1; + case 0x100: + host->caps.has_bad_data_ordering = 0; + host->caps.need_reset_after_xfer = 0; + case 0x0: + break; + default: + host->caps.has_pdc = 0; + dev_warn(&host->pdev->dev, + "Unmanaged mci version, set minimum capabilities\n"); + break; + } } -#else -static void atmci_configure_dma(struct atmel_mci *host) {} -#endif static int __init atmci_probe(struct platform_device *pdev) { @@ -1755,8 +2383,14 @@ static int __init atmci_probe(struct platform_device *pdev) if (!regs) return -ENXIO; pdata = pdev->dev.platform_data; - if (!pdata) - return -ENXIO; + if (!pdata) { + pdata = atmci_of_init(pdev); + if (IS_ERR(pdata)) { + dev_err(&pdev->dev, "platform data not available\n"); + return PTR_ERR(pdata); + } + } + irq = platform_get_irq(pdev, 0); if (irq < 0) return irq; @@ -1780,10 +2414,12 @@ static int __init atmci_probe(struct platform_device *pdev) if (!host->regs) goto err_ioremap; - clk_enable(host->mck); - mci_writel(host, CR, MCI_CR_SWRST); + ret = clk_prepare_enable(host->mck); + if (ret) + goto err_request_irq; + atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST); host->bus_hz = clk_get_rate(host->mck); - clk_disable(host->mck); + clk_disable_unprepare(host->mck); host->mapbase = regs->start; @@ -1793,24 +2429,48 @@ static int __init atmci_probe(struct platform_device *pdev) if (ret) goto err_request_irq; - atmci_configure_dma(host); + /* Get MCI capabilities and set operations according to it */ + atmci_get_cap(host); + if (atmci_configure_dma(host)) { + host->prepare_data = &atmci_prepare_data_dma; + host->submit_data = &atmci_submit_data_dma; + host->stop_transfer = &atmci_stop_transfer_dma; + } else if (host->caps.has_pdc) { + dev_info(&pdev->dev, "using PDC\n"); + host->prepare_data = &atmci_prepare_data_pdc; + host->submit_data = &atmci_submit_data_pdc; + host->stop_transfer = &atmci_stop_transfer_pdc; + } else { + dev_info(&pdev->dev, "using PIO\n"); + host->prepare_data = &atmci_prepare_data; + host->submit_data = &atmci_submit_data; + host->stop_transfer = &atmci_stop_transfer; + } platform_set_drvdata(pdev, host); + setup_timer(&host->timer, atmci_timeout_timer, (unsigned long)host); + /* We need at least one slot to succeed */ nr_slots = 0; ret = -ENODEV; if (pdata->slot[0].bus_width) { ret = atmci_init_slot(host, &pdata->slot[0], - 0, MCI_SDCSEL_SLOT_A, MCI_SDIOIRQA); - if (!ret) + 0, ATMCI_SDCSEL_SLOT_A, ATMCI_SDIOIRQA); + if (!ret) { nr_slots++; + host->buf_size = host->slot[0]->mmc->max_req_size; + } } if (pdata->slot[1].bus_width) { ret = atmci_init_slot(host, &pdata->slot[1], - 1, MCI_SDCSEL_SLOT_B, MCI_SDIOIRQB); - if (!ret) + 1, ATMCI_SDCSEL_SLOT_B, ATMCI_SDIOIRQB); + if (!ret) { nr_slots++; + if (host->slot[1]->mmc->max_req_size > host->buf_size) + host->buf_size = + host->slot[1]->mmc->max_req_size; + } } if (!nr_slots) { @@ -1818,6 +2478,17 @@ static int __init atmci_probe(struct platform_device *pdev) goto err_init_slot; } + if (!host->caps.has_rwproof) { + host->buffer = dma_alloc_coherent(&pdev->dev, host->buf_size, + &host->buf_phys_addr, + GFP_KERNEL); + if (!host->buffer) { + ret = -ENOMEM; + dev_err(&pdev->dev, "buffer allocation failed\n"); + goto err_init_slot; + } + } + dev_info(&pdev->dev, "Atmel MCI controller at 0x%08lx irq %d, %u slots\n", host->mapbase, irq, nr_slots); @@ -1825,10 +2496,8 @@ static int __init atmci_probe(struct platform_device *pdev) return 0; err_init_slot: -#ifdef CONFIG_MMC_ATMELMCI_DMA if (host->dma.chan) dma_release_channel(host->dma.chan); -#endif free_irq(irq, host); err_request_irq: iounmap(host->regs); @@ -1844,23 +2513,23 @@ static int __exit atmci_remove(struct platform_device *pdev) struct atmel_mci *host = platform_get_drvdata(pdev); unsigned int i; - platform_set_drvdata(pdev, NULL); + if (host->buffer) + dma_free_coherent(&pdev->dev, host->buf_size, + host->buffer, host->buf_phys_addr); - for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) { + for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { if (host->slot[i]) atmci_cleanup_slot(host->slot[i], i); } - clk_enable(host->mck); - mci_writel(host, IDR, ~0UL); - mci_writel(host, CR, MCI_CR_MCIDIS); - mci_readl(host, SR); - clk_disable(host->mck); + clk_prepare_enable(host->mck); + atmci_writel(host, ATMCI_IDR, ~0UL); + atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS); + atmci_readl(host, ATMCI_SR); + clk_disable_unprepare(host->mck); -#ifdef CONFIG_MMC_ATMELMCI_DMA if (host->dma.chan) dma_release_channel(host->dma.chan); -#endif free_irq(platform_get_irq(pdev, 0), host); iounmap(host->regs); @@ -1875,6 +2544,7 @@ static struct platform_driver atmci_driver = { .remove = __exit_p(atmci_remove), .driver = { .name = "atmel_mci", + .of_match_table = of_match_ptr(atmci_dt_ids), }, }; @@ -1892,5 +2562,5 @@ late_initcall(atmci_init); /* try to load after dma driver when built-in */ module_exit(atmci_exit); MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver"); -MODULE_AUTHOR("Haavard Skinnemoen <haavard.skinnemoen@atmel.com>"); +MODULE_AUTHOR("Haavard Skinnemoen (Atmel)"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c index 41e5a60493a..f5443a6c491 100644 --- a/drivers/mmc/host/au1xmmc.c +++ b/drivers/mmc/host/au1xmmc.c @@ -55,7 +55,7 @@ #ifdef DEBUG #define DBG(fmt, idx, args...) \ - printk(KERN_DEBUG "au1xmmc(%d): DEBUG: " fmt, idx, ##args) + pr_debug("au1xmmc(%d): DEBUG: " fmt, idx, ##args) #else #define DBG(fmt, idx, args...) do {} while (0) #endif @@ -64,11 +64,8 @@ #define AU1XMMC_DESCRIPTOR_COUNT 1 /* max DMA seg size: 64KB on Au1100, 4MB on Au1200 */ -#ifdef CONFIG_SOC_AU1100 -#define AU1XMMC_DESCRIPTOR_SIZE 0x0000ffff -#else /* Au1200 */ -#define AU1XMMC_DESCRIPTOR_SIZE 0x003fffff -#endif +#define AU1100_MMC_DESCRIPTOR_SIZE 0x0000ffff +#define AU1200_MMC_DESCRIPTOR_SIZE 0x003fffff #define AU1XMMC_OCR (MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | \ MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | \ @@ -127,6 +124,7 @@ struct au1xmmc_host { #define HOST_F_XMIT 0x0001 #define HOST_F_RECV 0x0002 #define HOST_F_DMA 0x0010 +#define HOST_F_DBDMA 0x0020 #define HOST_F_ACTIVE 0x0100 #define HOST_F_STOP 0x1000 @@ -151,6 +149,17 @@ struct au1xmmc_host { #define DMA_CHANNEL(h) \ (((h)->flags & HOST_F_XMIT) ? (h)->tx_chan : (h)->rx_chan) +static inline int has_dbdma(void) +{ + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1200: + case ALCHEMY_CPU_AU1300: + return 1; + default: + return 0; + } +} + static inline void IRQ_ON(struct au1xmmc_host *host, u32 mask) { u32 val = au_readl(HOST_CONFIG(host)); @@ -192,7 +201,7 @@ static inline void SEND_STOP(struct au1xmmc_host *host) au_writel(config2 | SD_CONFIG2_DF, HOST_CONFIG2(host)); au_sync(); - /* Send the stop commmand */ + /* Send the stop command */ au_writel(STOP_CMD, HOST_CMD(host)); } @@ -268,7 +277,7 @@ static int au1xmmc_send_command(struct au1xmmc_host *host, int wait, mmccmd |= SD_CMD_RT_3; break; default: - printk(KERN_INFO "au1xmmc: unhandled response type %02x\n", + pr_info("au1xmmc: unhandled response type %02x\n", mmc_resp_type(cmd)); return -EINVAL; } @@ -353,14 +362,12 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status) data->bytes_xfered = 0; if (!data->error) { - if (host->flags & HOST_F_DMA) { -#ifdef CONFIG_SOC_AU1200 /* DBDMA */ + if (host->flags & (HOST_F_DMA | HOST_F_DBDMA)) { u32 chan = DMA_CHANNEL(host); chan_tab_t *c = *((chan_tab_t **)chan); au1x_dma_chan_t *cp = c->chan_ptr; data->bytes_xfered = cp->ddma_bytecnt; -#endif } else data->bytes_xfered = (data->blocks * data->blksz) - host->pio.len; @@ -570,11 +577,10 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status) host->status = HOST_S_DATA; - if (host->flags & HOST_F_DMA) { -#ifdef CONFIG_SOC_AU1200 /* DBDMA */ + if ((host->flags & (HOST_F_DMA | HOST_F_DBDMA))) { u32 channel = DMA_CHANNEL(host); - /* Start the DMA as soon as the buffer gets something in it */ + /* Start the DBDMA as soon as the buffer gets something in it */ if (host->flags & HOST_F_RECV) { u32 mask = SD_STATUS_DB | SD_STATUS_NE; @@ -584,7 +590,6 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status) } au1xxx_dbdma_start(channel); -#endif } } @@ -633,8 +638,7 @@ static int au1xmmc_prepare_data(struct au1xmmc_host *host, au_writel(data->blksz - 1, HOST_BLKSIZE(host)); - if (host->flags & HOST_F_DMA) { -#ifdef CONFIG_SOC_AU1200 /* DBDMA */ + if (host->flags & (HOST_F_DMA | HOST_F_DBDMA)) { int i; u32 channel = DMA_CHANNEL(host); @@ -663,7 +667,6 @@ static int au1xmmc_prepare_data(struct au1xmmc_host *host, datalen -= len; } -#endif } else { host->pio.index = 0; host->pio.offset = 0; @@ -766,11 +769,15 @@ static void au1xmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) config2 = au_readl(HOST_CONFIG2(host)); switch (ios->bus_width) { + case MMC_BUS_WIDTH_8: + config2 |= SD_CONFIG2_BB; + break; case MMC_BUS_WIDTH_4: + config2 &= ~SD_CONFIG2_BB; config2 |= SD_CONFIG2_WB; break; case MMC_BUS_WIDTH_1: - config2 &= ~SD_CONFIG2_WB; + config2 &= ~(SD_CONFIG2_WB | SD_CONFIG2_BB); break; } au_writel(config2, HOST_CONFIG2(host)); @@ -838,7 +845,6 @@ static irqreturn_t au1xmmc_irq(int irq, void *dev_id) return IRQ_HANDLED; } -#ifdef CONFIG_SOC_AU1200 /* 8bit memory DMA device */ static dbdev_tab_t au1xmmc_mem_dbdev = { .dev_id = DSCR_CMD0_ALWAYS, @@ -905,7 +911,7 @@ static int au1xmmc_dbdma_init(struct au1xmmc_host *host) au1xxx_dbdma_ring_alloc(host->rx_chan, AU1XMMC_DESCRIPTOR_COUNT); /* DBDMA is good to go */ - host->flags |= HOST_F_DMA; + host->flags |= HOST_F_DMA | HOST_F_DBDMA; return 0; } @@ -918,7 +924,6 @@ static void au1xmmc_dbdma_shutdown(struct au1xmmc_host *host) au1xxx_dbdma_chan_free(host->rx_chan); } } -#endif static void au1xmmc_enable_sdio_irq(struct mmc_host *mmc, int en) { @@ -938,12 +943,12 @@ static const struct mmc_host_ops au1xmmc_ops = { .enable_sdio_irq = au1xmmc_enable_sdio_irq, }; -static int __devinit au1xmmc_probe(struct platform_device *pdev) +static int au1xmmc_probe(struct platform_device *pdev) { struct mmc_host *mmc; struct au1xmmc_host *host; struct resource *r; - int ret; + int ret, iflag; mmc = mmc_alloc_host(sizeof(struct au1xmmc_host), &pdev->dev); if (!mmc) { @@ -982,29 +987,43 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev) dev_err(&pdev->dev, "no IRQ defined\n"); goto out3; } - host->irq = r->start; - /* IRQ is shared among both SD controllers */ - ret = request_irq(host->irq, au1xmmc_irq, IRQF_SHARED, - DRIVER_NAME, host); - if (ret) { - dev_err(&pdev->dev, "cannot grab IRQ\n"); - goto out3; - } mmc->ops = &au1xmmc_ops; mmc->f_min = 450000; mmc->f_max = 24000000; - mmc->max_seg_size = AU1XMMC_DESCRIPTOR_SIZE; - mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT; - mmc->max_blk_size = 2048; mmc->max_blk_count = 512; mmc->ocr_avail = AU1XMMC_OCR; mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; + mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT; + + iflag = IRQF_SHARED; /* Au1100/Au1200: one int for both ctrls */ + + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1100: + mmc->max_seg_size = AU1100_MMC_DESCRIPTOR_SIZE; + break; + case ALCHEMY_CPU_AU1200: + mmc->max_seg_size = AU1200_MMC_DESCRIPTOR_SIZE; + break; + case ALCHEMY_CPU_AU1300: + iflag = 0; /* nothing is shared */ + mmc->max_seg_size = AU1200_MMC_DESCRIPTOR_SIZE; + mmc->f_max = 52000000; + if (host->ioarea->start == AU1100_SD0_PHYS_ADDR) + mmc->caps |= MMC_CAP_8_BIT_DATA; + break; + } + + ret = request_irq(host->irq, au1xmmc_irq, iflag, DRIVER_NAME, host); + if (ret) { + dev_err(&pdev->dev, "cannot grab IRQ\n"); + goto out3; + } host->status = HOST_S_IDLE; @@ -1028,11 +1047,11 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev) tasklet_init(&host->finish_task, au1xmmc_tasklet_finish, (unsigned long)host); -#ifdef CONFIG_SOC_AU1200 - ret = au1xmmc_dbdma_init(host); - if (ret) - printk(KERN_INFO DRIVER_NAME ": DBDMA init failed; using PIO\n"); -#endif + if (has_dbdma()) { + ret = au1xmmc_dbdma_init(host); + if (ret) + pr_info(DRIVER_NAME ": DBDMA init failed; using PIO\n"); + } #ifdef CONFIG_LEDS_CLASS if (host->platdata && host->platdata->led) { @@ -1056,7 +1075,7 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, host); - printk(KERN_INFO DRIVER_NAME ": MMC Controller %d set up at %8.8X" + pr_info(DRIVER_NAME ": MMC Controller %d set up at %8.8X" " (mode=%s)\n", pdev->id, host->iobase, host->flags & HOST_F_DMA ? "dma" : "pio"); @@ -1073,9 +1092,8 @@ out5: au_writel(0, HOST_CONFIG2(host)); au_sync(); -#ifdef CONFIG_SOC_AU1200 - au1xmmc_dbdma_shutdown(host); -#endif + if (host->flags & HOST_F_DBDMA) + au1xmmc_dbdma_shutdown(host); tasklet_kill(&host->data_task); tasklet_kill(&host->finish_task); @@ -1096,7 +1114,7 @@ out0: return ret; } -static int __devexit au1xmmc_remove(struct platform_device *pdev) +static int au1xmmc_remove(struct platform_device *pdev) { struct au1xmmc_host *host = platform_get_drvdata(pdev); @@ -1120,9 +1138,9 @@ static int __devexit au1xmmc_remove(struct platform_device *pdev) tasklet_kill(&host->data_task); tasklet_kill(&host->finish_task); -#ifdef CONFIG_SOC_AU1200 - au1xmmc_dbdma_shutdown(host); -#endif + if (host->flags & HOST_F_DBDMA) + au1xmmc_dbdma_shutdown(host); + au1xmmc_set_power(host, 0); free_irq(host->irq, host); @@ -1131,7 +1149,6 @@ static int __devexit au1xmmc_remove(struct platform_device *pdev) kfree(host->ioarea); mmc_free_host(host->mmc); - platform_set_drvdata(pdev, NULL); } return 0; } @@ -1140,11 +1157,6 @@ static int __devexit au1xmmc_remove(struct platform_device *pdev) static int au1xmmc_suspend(struct platform_device *pdev, pm_message_t state) { struct au1xmmc_host *host = platform_get_drvdata(pdev); - int ret; - - ret = mmc_suspend_host(host->mmc); - if (ret) - return ret; au_writel(0, HOST_CONFIG2(host)); au_writel(0, HOST_CONFIG(host)); @@ -1161,7 +1173,7 @@ static int au1xmmc_resume(struct platform_device *pdev) au1xmmc_reset_controller(host); - return mmc_resume_host(host->mmc); + return 0; } #else #define au1xmmc_suspend NULL @@ -1181,24 +1193,23 @@ static struct platform_driver au1xmmc_driver = { static int __init au1xmmc_init(void) { -#ifdef CONFIG_SOC_AU1200 - /* DSCR_CMD0_ALWAYS has a stride of 32 bits, we need a stride - * of 8 bits. And since devices are shared, we need to create - * our own to avoid freaking out other devices. - */ - memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev); - if (!memid) - printk(KERN_ERR "au1xmmc: cannot add memory dbdma dev\n"); -#endif + if (has_dbdma()) { + /* DSCR_CMD0_ALWAYS has a stride of 32 bits, we need a stride + * of 8 bits. And since devices are shared, we need to create + * our own to avoid freaking out other devices. + */ + memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev); + if (!memid) + pr_err("au1xmmc: cannot add memory dbdma\n"); + } return platform_driver_register(&au1xmmc_driver); } static void __exit au1xmmc_exit(void) { -#ifdef CONFIG_SOC_AU1200 - if (memid) + if (has_dbdma() && memid) au1xxx_ddma_del_device(memid); -#endif + platform_driver_unregister(&au1xmmc_driver); } diff --git a/drivers/mmc/host/bfin_sdh.c b/drivers/mmc/host/bfin_sdh.c index bac7d62866b..2b7f37e82ca 100644 --- a/drivers/mmc/host/bfin_sdh.c +++ b/drivers/mmc/host/bfin_sdh.c @@ -24,9 +24,7 @@ #include <asm/portmux.h> #include <asm/bfin_sdh.h> -#if defined(CONFIG_BF51x) -#define bfin_read_SDH_PWR_CTL bfin_read_RSI_PWR_CTL -#define bfin_write_SDH_PWR_CTL bfin_write_RSI_PWR_CTL +#if defined(CONFIG_BF51x) || defined(__ADSPBF60x__) #define bfin_read_SDH_CLK_CTL bfin_read_RSI_CLK_CTL #define bfin_write_SDH_CLK_CTL bfin_write_RSI_CLK_CTL #define bfin_write_SDH_ARGUMENT bfin_write_RSI_ARGUMENT @@ -45,17 +43,18 @@ #define bfin_write_SDH_E_STATUS bfin_write_RSI_E_STATUS #define bfin_read_SDH_STATUS bfin_read_RSI_STATUS #define bfin_write_SDH_MASK0 bfin_write_RSI_MASK0 +#define bfin_write_SDH_E_MASK bfin_write_RSI_E_MASK #define bfin_read_SDH_CFG bfin_read_RSI_CFG #define bfin_write_SDH_CFG bfin_write_RSI_CFG +# if defined(__ADSPBF60x__) +# define bfin_read_SDH_BLK_SIZE bfin_read_RSI_BLKSZ +# define bfin_write_SDH_BLK_SIZE bfin_write_RSI_BLKSZ +# else +# define bfin_read_SDH_PWR_CTL bfin_read_RSI_PWR_CTL +# define bfin_write_SDH_PWR_CTL bfin_write_RSI_PWR_CTL +# endif #endif -struct dma_desc_array { - unsigned long start_addr; - unsigned short cfg; - unsigned short x_count; - short x_modify; -} __packed; - struct sdh_host { struct mmc_host *mmc; spinlock_t lock; @@ -69,6 +68,7 @@ struct sdh_host { dma_addr_t sg_dma; int dma_len; + unsigned long sclk; unsigned int imask; unsigned int power_mode; unsigned int clk_div; @@ -134,11 +134,15 @@ static int sdh_setup_data(struct sdh_host *host, struct mmc_data *data) /* Only supports power-of-2 block size */ if (data->blksz & (data->blksz - 1)) return -EINVAL; +#ifndef RSI_BLKSZ data_ctl |= ((ffs(data->blksz) - 1) << 4); +#else + bfin_write_SDH_BLK_SIZE(data->blksz); +#endif bfin_write_SDH_DATA_CTL(data_ctl); /* the time of a host clock period in ns */ - cycle_ns = 1000000000 / (get_sclk() / (2 * (host->clk_div + 1))); + cycle_ns = 1000000000 / (host->sclk / (2 * (host->clk_div + 1))); timeout = data->timeout_ns / cycle_ns; timeout += data->timeout_clks; bfin_write_SDH_DATA_TIMER(timeout); @@ -152,8 +156,13 @@ static int sdh_setup_data(struct sdh_host *host, struct mmc_data *data) sdh_enable_stat_irq(host, (DAT_CRC_FAIL | DAT_TIME_OUT | DAT_END)); host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, host->dma_dir); -#if defined(CONFIG_BF54x) - dma_cfg |= DMAFLOW_ARRAY | NDSIZE_5 | RESTART | WDSIZE_32 | DMAEN; +#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) + dma_cfg |= DMAFLOW_ARRAY | RESTART | WDSIZE_32 | DMAEN; +# ifdef RSI_BLKSZ + dma_cfg |= PSIZE_32 | NDSIZE_3; +# else + dma_cfg |= NDSIZE_5; +# endif { struct scatterlist *sg; int i; @@ -163,7 +172,7 @@ static int sdh_setup_data(struct sdh_host *host, struct mmc_data *data) host->sg_cpu[i].x_count = sg_dma_len(sg) / 4; host->sg_cpu[i].x_modify = 4; dev_dbg(mmc_dev(host->mmc), "%d: start_addr:0x%lx, " - "cfg:0x%x, x_count:0x%x, x_modify:0x%x\n", + "cfg:0x%lx, x_count:0x%lx, x_modify:0x%lx\n", i, host->sg_cpu[i].start_addr, host->sg_cpu[i].cfg, host->sg_cpu[i].x_count, host->sg_cpu[i].x_modify); @@ -179,6 +188,7 @@ static int sdh_setup_data(struct sdh_host *host, struct mmc_data *data) set_dma_curr_desc_addr(host->dma_ch, (unsigned long *)host->sg_dma); set_dma_x_count(host->dma_ch, 0); set_dma_x_modify(host->dma_ch, 0); + SSYNC(); set_dma_config(host->dma_ch, dma_cfg); #elif defined(CONFIG_BF51x) /* RSI DMA doesn't work in array mode */ @@ -186,6 +196,7 @@ static int sdh_setup_data(struct sdh_host *host, struct mmc_data *data) set_dma_start_addr(host->dma_ch, sg_dma_address(&data->sg[0])); set_dma_x_count(host->dma_ch, length / 4); set_dma_x_modify(host->dma_ch, 4); + SSYNC(); set_dma_config(host->dma_ch, dma_cfg); #endif bfin_write_SDH_DATA_CTL(bfin_read_SDH_DATA_CTL() | DTX_DMA_E | DTX_E); @@ -303,7 +314,6 @@ static int sdh_data_done(struct sdh_host *host, unsigned int stat) else data->bytes_xfered = 0; - sdh_disable_stat_irq(host, DAT_END | DAT_TIME_OUT | DAT_CRC_FAIL | RX_OVERRUN | TX_UNDERRUN); bfin_write_SDH_STATUS_CLR(DAT_END_STAT | DAT_TIMEOUT_STAT | \ DAT_CRC_FAIL_STAT | DAT_BLK_END_STAT | RX_OVERRUN | TX_UNDERRUN); bfin_write_SDH_DATA_CTL(0); @@ -328,74 +338,114 @@ static void sdh_request(struct mmc_host *mmc, struct mmc_request *mrq) dev_dbg(mmc_dev(host->mmc), "%s enter, mrp:%p, cmd:%p\n", __func__, mrq, mrq->cmd); WARN_ON(host->mrq != NULL); + spin_lock(&host->lock); host->mrq = mrq; host->data = mrq->data; if (mrq->data && mrq->data->flags & MMC_DATA_READ) { ret = sdh_setup_data(host, mrq->data); if (ret) - return; + goto data_err; } sdh_start_cmd(host, mrq->cmd); +data_err: + spin_unlock(&host->lock); } static void sdh_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) { struct sdh_host *host; - unsigned long flags; u16 clk_ctl = 0; +#ifndef RSI_BLKSZ u16 pwr_ctl = 0; +#endif u16 cfg; host = mmc_priv(mmc); - spin_lock_irqsave(&host->lock, flags); - if (ios->clock) { - unsigned long sys_clk, ios_clk; - unsigned char clk_div; - ios_clk = 2 * ios->clock; - sys_clk = get_sclk(); - clk_div = sys_clk / ios_clk; - if (sys_clk % ios_clk == 0) - clk_div -= 1; - clk_div = min_t(unsigned char, clk_div, 0xFF); - clk_ctl |= clk_div; - clk_ctl |= CLK_E; - host->clk_div = clk_div; - } else - sdh_stop_clock(host); - - if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) -#ifdef CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND - pwr_ctl |= ROD_CTL; -#else - pwr_ctl |= SD_CMD_OD | ROD_CTL; -#endif + spin_lock(&host->lock); - if (ios->bus_width == MMC_BUS_WIDTH_4) { - cfg = bfin_read_SDH_CFG(); + cfg = bfin_read_SDH_CFG(); + cfg |= MWE; + switch (ios->bus_width) { + case MMC_BUS_WIDTH_4: +#ifndef RSI_BLKSZ cfg &= ~PD_SDDAT3; +#endif cfg |= PUP_SDDAT3; /* Enable 4 bit SDIO */ - cfg |= (SD4E | MWE); - bfin_write_SDH_CFG(cfg); - clk_ctl |= WIDE_BUS; - } else { - cfg = bfin_read_SDH_CFG(); - cfg |= MWE; - bfin_write_SDH_CFG(cfg); + cfg |= SD4E; + clk_ctl |= WIDE_BUS_4; + break; + case MMC_BUS_WIDTH_8: +#ifndef RSI_BLKSZ + cfg &= ~PD_SDDAT3; +#endif + cfg |= PUP_SDDAT3; + /* Disable 4 bit SDIO */ + cfg &= ~SD4E; + clk_ctl |= BYTE_BUS_8; + break; + default: + cfg &= ~PUP_SDDAT3; + /* Disable 4 bit SDIO */ + cfg &= ~SD4E; } - - bfin_write_SDH_CLK_CTL(clk_ctl); + bfin_write_SDH_CFG(cfg); host->power_mode = ios->power_mode; - if (ios->power_mode == MMC_POWER_ON) +#ifndef RSI_BLKSZ + if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) { + pwr_ctl |= ROD_CTL; +# ifndef CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND + pwr_ctl |= SD_CMD_OD; +# endif + } + + if (ios->power_mode != MMC_POWER_OFF) pwr_ctl |= PWR_ON; + else + pwr_ctl &= ~PWR_ON; bfin_write_SDH_PWR_CTL(pwr_ctl); +#else +# ifndef CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND + if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) + cfg |= SD_CMD_OD; + else + cfg &= ~SD_CMD_OD; +# endif + + if (ios->power_mode != MMC_POWER_OFF) + cfg |= PWR_ON; + else + cfg &= ~PWR_ON; + + bfin_write_SDH_CFG(cfg); +#endif SSYNC(); - spin_unlock_irqrestore(&host->lock, flags); + if (ios->power_mode == MMC_POWER_ON && ios->clock) { + unsigned char clk_div; + clk_div = (get_sclk() / ios->clock - 1) / 2; + clk_div = min_t(unsigned char, clk_div, 0xFF); + clk_ctl |= clk_div; + clk_ctl |= CLK_E; + host->clk_div = clk_div; + bfin_write_SDH_CLK_CTL(clk_ctl); + } else + sdh_stop_clock(host); + + /* set up sdh interrupt mask*/ + if (ios->power_mode == MMC_POWER_ON) + bfin_write_SDH_MASK0(DAT_END | DAT_TIME_OUT | DAT_CRC_FAIL | + RX_OVERRUN | TX_UNDERRUN | CMD_SENT | CMD_RESP_END | + CMD_TIME_OUT | CMD_CRC_FAIL); + else + bfin_write_SDH_MASK0(0); + SSYNC(); + + spin_unlock(&host->lock); dev_dbg(mmc_dev(host->mmc), "SDH: clk_div = 0x%x actual clock:%ld expected clock:%d\n", host->clk_div, @@ -412,7 +462,7 @@ static irqreturn_t sdh_dma_irq(int irq, void *devid) { struct sdh_host *host = devid; - dev_dbg(mmc_dev(host->mmc), "%s enter, irq_stat: 0x%04x\n", __func__, + dev_dbg(mmc_dev(host->mmc), "%s enter, irq_stat: 0x%04lx\n", __func__, get_dma_curr_irqstat(host->dma_ch)); clear_dma_irqstat(host->dma_ch); SSYNC(); @@ -427,6 +477,9 @@ static irqreturn_t sdh_stat_irq(int irq, void *devid) int handled = 0; dev_dbg(mmc_dev(host->mmc), "%s enter\n", __func__); + + spin_lock(&host->lock); + status = bfin_read_SDH_E_STATUS(); if (status & SD_CARD_DET) { mmc_detect_change(host->mmc, 0); @@ -444,12 +497,31 @@ static irqreturn_t sdh_stat_irq(int irq, void *devid) if (status & (DAT_END | DAT_TIME_OUT | DAT_CRC_FAIL | RX_OVERRUN | TX_UNDERRUN)) handled |= sdh_data_done(host, status); + spin_unlock(&host->lock); + dev_dbg(mmc_dev(host->mmc), "%s exit\n\n", __func__); return IRQ_RETVAL(handled); } -static int __devinit sdh_probe(struct platform_device *pdev) +static void sdh_reset(void) +{ +#if defined(CONFIG_BF54x) + /* Secure Digital Host shares DMA with Nand controller */ + bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() | 0x1); +#endif + + bfin_write_SDH_CFG(bfin_read_SDH_CFG() | CLKS_EN); + SSYNC(); + + /* Disable card inserting detection pin. set MMC_CAP_NEEDS_POLL, and + * mmc stack will do the detection. + */ + bfin_write_SDH_CFG((bfin_read_SDH_CFG() & 0x1F) | (PUP_SDDAT | PUP_SDDAT3)); + SSYNC(); +} + +static int sdh_probe(struct platform_device *pdev) { struct mmc_host *mmc; struct sdh_host *host; @@ -462,15 +534,23 @@ static int __devinit sdh_probe(struct platform_device *pdev) goto out; } - mmc = mmc_alloc_host(sizeof(*mmc), &pdev->dev); + mmc = mmc_alloc_host(sizeof(struct sdh_host), &pdev->dev); if (!mmc) { ret = -ENOMEM; goto out; } mmc->ops = &sdh_ops; - mmc->max_segs = 32; +#if defined(CONFIG_BF51x) + mmc->max_segs = 1; +#else + mmc->max_segs = PAGE_SIZE / sizeof(struct dma_desc_array); +#endif +#ifdef RSI_BLKSZ + mmc->max_seg_size = -1; +#else mmc->max_seg_size = 1 << 16; +#endif mmc->max_blk_size = 1 << 11; mmc->max_blk_count = 1 << 11; mmc->max_req_size = PAGE_SIZE; @@ -480,6 +560,7 @@ static int __devinit sdh_probe(struct platform_device *pdev) mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_NEEDS_POLL; host = mmc_priv(mmc); host->mmc = mmc; + host->sclk = get_sclk(); spin_lock_init(&host->lock); host->irq = drv_data->irq_int0; @@ -504,7 +585,6 @@ static int __devinit sdh_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, mmc); - mmc_add_host(mmc); ret = request_irq(host->irq, sdh_stat_irq, 0, "SDH Status IRQ", host); if (ret) { @@ -517,20 +597,10 @@ static int __devinit sdh_probe(struct platform_device *pdev) dev_err(&pdev->dev, "unable to request peripheral pins\n"); goto out4; } -#if defined(CONFIG_BF54x) - /* Secure Digital Host shares DMA with Nand controller */ - bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() | 0x1); -#endif - bfin_write_SDH_CFG(bfin_read_SDH_CFG() | CLKS_EN); - SSYNC(); - - /* Disable card inserting detection pin. set MMC_CAP_NEES_POLL, and - * mmc stack will do the detection. - */ - bfin_write_SDH_CFG((bfin_read_SDH_CFG() & 0x1F) | (PUP_SDDAT | PUP_SDDAT3)); - SSYNC(); + sdh_reset(); + mmc_add_host(mmc); return 0; out4: @@ -546,12 +616,10 @@ out1: return ret; } -static int __devexit sdh_remove(struct platform_device *pdev) +static int sdh_remove(struct platform_device *pdev) { struct mmc_host *mmc = platform_get_drvdata(pdev); - platform_set_drvdata(pdev, NULL); - if (mmc) { struct sdh_host *host = mmc_priv(mmc); @@ -571,22 +639,15 @@ static int __devexit sdh_remove(struct platform_device *pdev) #ifdef CONFIG_PM static int sdh_suspend(struct platform_device *dev, pm_message_t state) { - struct mmc_host *mmc = platform_get_drvdata(dev); struct bfin_sd_host *drv_data = get_sdh_data(dev); - int ret = 0; - - if (mmc) - ret = mmc_suspend_host(mmc); - bfin_write_SDH_PWR_CTL(bfin_read_SDH_PWR_CTL() & ~PWR_ON); peripheral_free_list(drv_data->pin_req); - return ret; + return 0; } static int sdh_resume(struct platform_device *dev) { - struct mmc_host *mmc = platform_get_drvdata(dev); struct bfin_sd_host *drv_data = get_sdh_data(dev); int ret = 0; @@ -596,20 +657,7 @@ static int sdh_resume(struct platform_device *dev) return ret; } - bfin_write_SDH_PWR_CTL(bfin_read_SDH_PWR_CTL() | PWR_ON); -#if defined(CONFIG_BF54x) - /* Secure Digital Host shares DMA with Nand controller */ - bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() | 0x1); -#endif - bfin_write_SDH_CFG(bfin_read_SDH_CFG() | CLKS_EN); - SSYNC(); - - bfin_write_SDH_CFG((bfin_read_SDH_CFG() & 0x1F) | (PUP_SDDAT | PUP_SDDAT3)); - SSYNC(); - - if (mmc) - ret = mmc_resume_host(mmc); - + sdh_reset(); return ret; } #else @@ -619,7 +667,7 @@ static int sdh_resume(struct platform_device *dev) static struct platform_driver sdh_driver = { .probe = sdh_probe, - .remove = __devexit_p(sdh_remove), + .remove = sdh_remove, .suspend = sdh_suspend, .resume = sdh_resume, .driver = { @@ -627,17 +675,7 @@ static struct platform_driver sdh_driver = { }, }; -static int __init sdh_init(void) -{ - return platform_driver_register(&sdh_driver); -} -module_init(sdh_init); - -static void __exit sdh_exit(void) -{ - platform_driver_unregister(&sdh_driver); -} -module_exit(sdh_exit); +module_platform_driver(sdh_driver); MODULE_DESCRIPTION("Blackfin Secure Digital Host Driver"); MODULE_AUTHOR("Cliff Cai, Roy Huang"); diff --git a/drivers/mmc/host/cb710-mmc.c b/drivers/mmc/host/cb710-mmc.c index 66b4ce587f4..1087b4c79cd 100644 --- a/drivers/mmc/host/cb710-mmc.c +++ b/drivers/mmc/host/cb710-mmc.c @@ -205,7 +205,7 @@ static int cb710_wait_while_busy(struct cb710_slot *slot, uint8_t mask) "WAIT12: waited %d loops, mask %02X, entry val %08X, exit val %08X\n", limit, mask, e, x); #endif - return 0; + return err; } static void cb710_mmc_set_transfer_size(struct cb710_slot *slot, @@ -667,12 +667,6 @@ static const struct mmc_host_ops cb710_mmc_host = { static int cb710_mmc_suspend(struct platform_device *pdev, pm_message_t state) { struct cb710_slot *slot = cb710_pdev_to_slot(pdev); - struct mmc_host *mmc = cb710_slot_to_mmc(slot); - int err; - - err = mmc_suspend_host(mmc); - if (err) - return err; cb710_mmc_enable_irq(slot, 0, ~0); return 0; @@ -681,16 +675,14 @@ static int cb710_mmc_suspend(struct platform_device *pdev, pm_message_t state) static int cb710_mmc_resume(struct platform_device *pdev) { struct cb710_slot *slot = cb710_pdev_to_slot(pdev); - struct mmc_host *mmc = cb710_slot_to_mmc(slot); cb710_mmc_enable_irq(slot, 0, ~0); - - return mmc_resume_host(mmc); + return 0; } #endif /* CONFIG_PM */ -static int __devinit cb710_mmc_init(struct platform_device *pdev) +static int cb710_mmc_init(struct platform_device *pdev) { struct cb710_slot *slot = cb710_pdev_to_slot(pdev); struct cb710_chip *chip = cb710_slot_to_chip(slot); @@ -703,7 +695,7 @@ static int __devinit cb710_mmc_init(struct platform_device *pdev) if (!mmc) return -ENOMEM; - dev_set_drvdata(&pdev->dev, mmc); + platform_set_drvdata(pdev, mmc); /* harmless (maybe) magic */ pci_read_config_dword(chip->pdev, 0x48, &val); @@ -746,7 +738,7 @@ err_free_mmc: return err; } -static int __devexit cb710_mmc_exit(struct platform_device *pdev) +static int cb710_mmc_exit(struct platform_device *pdev) { struct cb710_slot *slot = cb710_pdev_to_slot(pdev); struct mmc_host *mmc = cb710_slot_to_mmc(slot); @@ -773,25 +765,14 @@ static int __devexit cb710_mmc_exit(struct platform_device *pdev) static struct platform_driver cb710_mmc_driver = { .driver.name = "cb710-mmc", .probe = cb710_mmc_init, - .remove = __devexit_p(cb710_mmc_exit), + .remove = cb710_mmc_exit, #ifdef CONFIG_PM .suspend = cb710_mmc_suspend, .resume = cb710_mmc_resume, #endif }; -static int __init cb710_mmc_init_module(void) -{ - return platform_driver_register(&cb710_mmc_driver); -} - -static void __exit cb710_mmc_cleanup_module(void) -{ - platform_driver_unregister(&cb710_mmc_driver); -} - -module_init(cb710_mmc_init_module); -module_exit(cb710_mmc_cleanup_module); +module_platform_driver(cb710_mmc_driver); MODULE_AUTHOR("MichaÅ‚ MirosÅ‚aw <mirq-linux@rere.qmqm.pl>"); MODULE_DESCRIPTION("ENE CB710 memory card reader driver - MMC/SD part"); diff --git a/drivers/mmc/host/cb710-mmc.h b/drivers/mmc/host/cb710-mmc.h index e845c776bdd..8984ec878fc 100644 --- a/drivers/mmc/host/cb710-mmc.h +++ b/drivers/mmc/host/cb710-mmc.h @@ -24,7 +24,7 @@ struct cb710_mmc_reader { static inline struct mmc_host *cb710_slot_to_mmc(struct cb710_slot *slot) { - return dev_get_drvdata(&slot->pdev.dev); + return platform_get_drvdata(&slot->pdev); } static inline struct cb710_slot *cb710_mmc_to_slot(struct mmc_host *mmc) diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c index e15547cf701..5d4c5e0fba2 100644 --- a/drivers/mmc/host/davinci_mmc.c +++ b/drivers/mmc/host/davinci_mmc.c @@ -30,11 +30,15 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/delay.h> +#include <linux/dmaengine.h> #include <linux/dma-mapping.h> +#include <linux/edma.h> #include <linux/mmc/mmc.h> +#include <linux/of.h> +#include <linux/of_device.h> -#include <mach/mmc.h> -#include <mach/edma.h> +#include <linux/platform_data/edma.h> +#include <linux/platform_data/mmc-davinci.h> /* * Register Definitions @@ -66,8 +70,8 @@ #define DAVINCI_MMCBLNC 0x60 #define DAVINCI_SDIOCTL 0x64 #define DAVINCI_SDIOST0 0x68 -#define DAVINCI_SDIOEN 0x6C -#define DAVINCI_SDIOST 0x70 +#define DAVINCI_SDIOIEN 0x6C +#define DAVINCI_SDIOIST 0x70 #define DAVINCI_MMCFIFOCTL 0x74 /* FIFO Control Register */ /* DAVINCI_MMCCTL definitions */ @@ -131,6 +135,14 @@ #define MMCFIFOCTL_ACCWD_2 (2 << 3) /* access width of 2 bytes */ #define MMCFIFOCTL_ACCWD_1 (3 << 3) /* access width of 1 byte */ +/* DAVINCI_SDIOST0 definitions */ +#define SDIOST0_DAT1_HI BIT(0) + +/* DAVINCI_SDIOIEN definitions */ +#define SDIOIEN_IOINTEN BIT(0) + +/* DAVINCI_SDIOIST definitions */ +#define SDIOIST_IOINT BIT(0) /* MMCSD Init clock in Hz in opendrain mode */ #define MMCSD_INIT_CLOCK 200000 @@ -152,6 +164,16 @@ module_param(rw_threshold, uint, S_IRUGO); MODULE_PARM_DESC(rw_threshold, "Read/Write threshold. Default = 32"); +static unsigned poll_threshold = 128; +module_param(poll_threshold, uint, S_IRUGO); +MODULE_PARM_DESC(poll_threshold, + "Polling transaction size threshold. Default = 128"); + +static unsigned poll_loopcount = 32; +module_param(poll_loopcount, uint, S_IRUGO); +MODULE_PARM_DESC(poll_loopcount, + "Maximum polling loop count. Default = 32"); + static unsigned __initdata use_dma = 1; module_param(use_dma, uint, 0); MODULE_PARM_DESC(use_dma, "Whether to use DMA or not. Default = 1"); @@ -164,14 +186,13 @@ struct mmc_davinci_host { unsigned int mmc_input_clk; void __iomem *base; struct resource *mem_res; - int irq; + int mmc_irq, sdio_irq; unsigned char bus_mode; #define DAVINCI_MMC_DATADIR_NONE 0 #define DAVINCI_MMC_DATADIR_READ 1 #define DAVINCI_MMC_DATADIR_WRITE 2 unsigned char data_dir; - unsigned char suspended; /* buffer is used during PIO of one scatterlist segment, and * is updated along with buffer_bytes_left. bytes_left applies @@ -182,18 +203,12 @@ struct mmc_davinci_host { u32 bytes_left; u32 rxdma, txdma; + struct dma_chan *dma_tx; + struct dma_chan *dma_rx; bool use_dma; bool do_dma; - - /* Scatterlist DMA uses one or more parameter RAM entries: - * the main one (associated with rxdma or txdma) plus zero or - * more links. The entries for a given transfer differ only - * by memory buffer (address, length) and link field. - */ - struct edmacc_param tx_template; - struct edmacc_param rx_template; - unsigned n_link; - u32 links[MAX_NR_SG - 1]; + bool sdio_int; + bool active_request; /* For PIO we walk scatterlists one segment at a time. */ unsigned int sg_len; @@ -210,6 +225,7 @@ struct mmc_davinci_host { #endif }; +static irqreturn_t mmc_davinci_irq(int irq, void *dev_id); /* PIO only */ static void mmc_davinci_sg_to_buf(struct mmc_davinci_host *host) @@ -367,7 +383,20 @@ static void mmc_davinci_start_command(struct mmc_davinci_host *host, writel(cmd->arg, host->base + DAVINCI_MMCARGHL); writel(cmd_reg, host->base + DAVINCI_MMCCMD); - writel(im_val, host->base + DAVINCI_MMCIM); + + host->active_request = true; + + if (!host->do_dma && host->bytes_left <= poll_threshold) { + u32 count = poll_loopcount; + + while (host->active_request && count--) { + mmc_davinci_irq(0, host); + cpu_relax(); + } + } + + if (host->active_request) + writel(im_val, host->base + DAVINCI_MMCIM); } /*----------------------------------------------------------------------*/ @@ -376,153 +405,74 @@ static void mmc_davinci_start_command(struct mmc_davinci_host *host, static void davinci_abort_dma(struct mmc_davinci_host *host) { - int sync_dev; + struct dma_chan *sync_dev; if (host->data_dir == DAVINCI_MMC_DATADIR_READ) - sync_dev = host->rxdma; + sync_dev = host->dma_rx; else - sync_dev = host->txdma; + sync_dev = host->dma_tx; - edma_stop(sync_dev); - edma_clean_channel(sync_dev); + dmaengine_terminate_all(sync_dev); } -static void -mmc_davinci_xfer_done(struct mmc_davinci_host *host, struct mmc_data *data); - -static void mmc_davinci_dma_cb(unsigned channel, u16 ch_status, void *data) -{ - if (DMA_COMPLETE != ch_status) { - struct mmc_davinci_host *host = data; - - /* Currently means: DMA Event Missed, or "null" transfer - * request was seen. In the future, TC errors (like bad - * addresses) might be presented too. - */ - dev_warn(mmc_dev(host->mmc), "DMA %s error\n", - (host->data->flags & MMC_DATA_WRITE) - ? "write" : "read"); - host->data->error = -EIO; - mmc_davinci_xfer_done(host, host->data); - } -} - -/* Set up tx or rx template, to be modified and updated later */ -static void __init mmc_davinci_dma_setup(struct mmc_davinci_host *host, - bool tx, struct edmacc_param *template) -{ - unsigned sync_dev; - const u16 acnt = 4; - const u16 bcnt = rw_threshold >> 2; - const u16 ccnt = 0; - u32 src_port = 0; - u32 dst_port = 0; - s16 src_bidx, dst_bidx; - s16 src_cidx, dst_cidx; - - /* - * A-B Sync transfer: each DMA request is for one "frame" of - * rw_threshold bytes, broken into "acnt"-size chunks repeated - * "bcnt" times. Each segment needs "ccnt" such frames; since - * we tell the block layer our mmc->max_seg_size limit, we can - * trust (later) that it's within bounds. - * - * The FIFOs are read/written in 4-byte chunks (acnt == 4) and - * EDMA will optimize memory operations to use larger bursts. - */ - if (tx) { - sync_dev = host->txdma; - - /* src_prt, ccnt, and link to be set up later */ - src_bidx = acnt; - src_cidx = acnt * bcnt; - - dst_port = host->mem_res->start + DAVINCI_MMCDXR; - dst_bidx = 0; - dst_cidx = 0; - } else { - sync_dev = host->rxdma; - - src_port = host->mem_res->start + DAVINCI_MMCDRR; - src_bidx = 0; - src_cidx = 0; - - /* dst_prt, ccnt, and link to be set up later */ - dst_bidx = acnt; - dst_cidx = acnt * bcnt; - } - - /* - * We can't use FIFO mode for the FIFOs because MMC FIFO addresses - * are not 256-bit (32-byte) aligned. So we use INCR, and the W8BIT - * parameter is ignored. - */ - edma_set_src(sync_dev, src_port, INCR, W8BIT); - edma_set_dest(sync_dev, dst_port, INCR, W8BIT); - - edma_set_src_index(sync_dev, src_bidx, src_cidx); - edma_set_dest_index(sync_dev, dst_bidx, dst_cidx); - - edma_set_transfer_params(sync_dev, acnt, bcnt, ccnt, 8, ABSYNC); - - edma_read_slot(sync_dev, template); - - /* don't bother with irqs or chaining */ - template->opt |= EDMA_CHAN_SLOT(sync_dev) << 12; -} - -static void mmc_davinci_send_dma_request(struct mmc_davinci_host *host, +static int mmc_davinci_send_dma_request(struct mmc_davinci_host *host, struct mmc_data *data) { - struct edmacc_param *template; - int channel, slot; - unsigned link; - struct scatterlist *sg; - unsigned sg_len; - unsigned bytes_left = host->bytes_left; - const unsigned shift = ffs(rw_threshold) - 1;; + struct dma_chan *chan; + struct dma_async_tx_descriptor *desc; + int ret = 0; if (host->data_dir == DAVINCI_MMC_DATADIR_WRITE) { - template = &host->tx_template; - channel = host->txdma; + struct dma_slave_config dma_tx_conf = { + .direction = DMA_MEM_TO_DEV, + .dst_addr = host->mem_res->start + DAVINCI_MMCDXR, + .dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .dst_maxburst = + rw_threshold / DMA_SLAVE_BUSWIDTH_4_BYTES, + }; + chan = host->dma_tx; + dmaengine_slave_config(host->dma_tx, &dma_tx_conf); + + desc = dmaengine_prep_slave_sg(host->dma_tx, + data->sg, + host->sg_len, + DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + dev_dbg(mmc_dev(host->mmc), + "failed to allocate DMA TX descriptor"); + ret = -1; + goto out; + } } else { - template = &host->rx_template; - channel = host->rxdma; - } - - /* We know sg_len and ccnt will never be out of range because - * we told the mmc layer which in turn tells the block layer - * to ensure that it only hands us one scatterlist segment - * per EDMA PARAM entry. Update the PARAM - * entries needed for each segment of this scatterlist. - */ - for (slot = channel, link = 0, sg = data->sg, sg_len = host->sg_len; - sg_len-- != 0 && bytes_left; - sg = sg_next(sg), slot = host->links[link++]) { - u32 buf = sg_dma_address(sg); - unsigned count = sg_dma_len(sg); - - template->link_bcntrld = sg_len - ? (EDMA_CHAN_SLOT(host->links[link]) << 5) - : 0xffff; - - if (count > bytes_left) - count = bytes_left; - bytes_left -= count; - - if (host->data_dir == DAVINCI_MMC_DATADIR_WRITE) - template->src = buf; - else - template->dst = buf; - template->ccnt = count >> shift; - - edma_write_slot(slot, template); + struct dma_slave_config dma_rx_conf = { + .direction = DMA_DEV_TO_MEM, + .src_addr = host->mem_res->start + DAVINCI_MMCDRR, + .src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .src_maxburst = + rw_threshold / DMA_SLAVE_BUSWIDTH_4_BYTES, + }; + chan = host->dma_rx; + dmaengine_slave_config(host->dma_rx, &dma_rx_conf); + + desc = dmaengine_prep_slave_sg(host->dma_rx, + data->sg, + host->sg_len, + DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + dev_dbg(mmc_dev(host->mmc), + "failed to allocate DMA RX descriptor"); + ret = -1; + goto out; + } } - if (host->version == MMC_CTLR_VERSION_2) - edma_clear_event(channel); + dmaengine_submit(desc); + dma_async_issue_pending(chan); - edma_start(channel); +out: + return ret; } static int mmc_davinci_start_dma_transfer(struct mmc_davinci_host *host, @@ -530,6 +480,7 @@ static int mmc_davinci_start_dma_transfer(struct mmc_davinci_host *host, { int i; int mask = rw_threshold - 1; + int ret = 0; host->sg_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, ((data->flags & MMC_DATA_WRITE) @@ -549,70 +500,50 @@ static int mmc_davinci_start_dma_transfer(struct mmc_davinci_host *host, } host->do_dma = 1; - mmc_davinci_send_dma_request(host, data); + ret = mmc_davinci_send_dma_request(host, data); - return 0; + return ret; } static void __init_or_module davinci_release_dma_channels(struct mmc_davinci_host *host) { - unsigned i; - if (!host->use_dma) return; - for (i = 0; i < host->n_link; i++) - edma_free_slot(host->links[i]); - - edma_free_channel(host->txdma); - edma_free_channel(host->rxdma); + dma_release_channel(host->dma_tx); + dma_release_channel(host->dma_rx); } static int __init davinci_acquire_dma_channels(struct mmc_davinci_host *host) { - u32 link_size; - int r, i; - - /* Acquire master DMA write channel */ - r = edma_alloc_channel(host->txdma, mmc_davinci_dma_cb, host, - EVENTQ_DEFAULT); - if (r < 0) { - dev_warn(mmc_dev(host->mmc), "alloc %s channel err %d\n", - "tx", r); - return r; + int r; + dma_cap_mask_t mask; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + host->dma_tx = + dma_request_slave_channel_compat(mask, edma_filter_fn, + &host->txdma, mmc_dev(host->mmc), "tx"); + if (!host->dma_tx) { + dev_err(mmc_dev(host->mmc), "Can't get dma_tx channel\n"); + return -ENODEV; } - mmc_davinci_dma_setup(host, true, &host->tx_template); - - /* Acquire master DMA read channel */ - r = edma_alloc_channel(host->rxdma, mmc_davinci_dma_cb, host, - EVENTQ_DEFAULT); - if (r < 0) { - dev_warn(mmc_dev(host->mmc), "alloc %s channel err %d\n", - "rx", r); - goto free_master_write; - } - mmc_davinci_dma_setup(host, false, &host->rx_template); - /* Allocate parameter RAM slots, which will later be bound to a - * channel as needed to handle a scatterlist. - */ - link_size = min_t(unsigned, host->nr_sg, ARRAY_SIZE(host->links)); - for (i = 0; i < link_size; i++) { - r = edma_alloc_slot(EDMA_CTLR(host->txdma), EDMA_SLOT_ANY); - if (r < 0) { - dev_dbg(mmc_dev(host->mmc), "dma PaRAM alloc --> %d\n", - r); - break; - } - host->links[i] = r; + host->dma_rx = + dma_request_slave_channel_compat(mask, edma_filter_fn, + &host->rxdma, mmc_dev(host->mmc), "rx"); + if (!host->dma_rx) { + dev_err(mmc_dev(host->mmc), "Can't get dma_rx channel\n"); + r = -ENODEV; + goto free_master_write; } - host->n_link = i; return 0; free_master_write: - edma_free_channel(host->txdma); + dma_release_channel(host->dma_tx); return r; } @@ -798,12 +729,25 @@ static void calculate_clk_divider(struct mmc_host *mmc, struct mmc_ios *ios) static void mmc_davinci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) { struct mmc_davinci_host *host = mmc_priv(mmc); + struct platform_device *pdev = to_platform_device(mmc->parent); + struct davinci_mmc_config *config = pdev->dev.platform_data; dev_dbg(mmc_dev(host->mmc), "clock %dHz busmode %d powermode %d Vdd %04x\n", ios->clock, ios->bus_mode, ios->power_mode, ios->vdd); + switch (ios->power_mode) { + case MMC_POWER_OFF: + if (config && config->set_power) + config->set_power(pdev->id, false); + break; + case MMC_POWER_UP: + if (config && config->set_power) + config->set_power(pdev->id, true); + break; + } + switch (ios->bus_width) { case MMC_BUS_WIDTH_8: dev_dbg(mmc_dev(host->mmc), "Enabling 8 bit mode\n"); @@ -866,6 +810,19 @@ mmc_davinci_xfer_done(struct mmc_davinci_host *host, struct mmc_data *data) { host->data = NULL; + if (host->mmc->caps & MMC_CAP_SDIO_IRQ) { + /* + * SDIO Interrupt Detection work-around as suggested by + * Davinci Errata (TMS320DM355 Silicon Revision 1.1 Errata + * 2.1.6): Signal SDIO interrupt only if it is enabled by core + */ + if (host->sdio_int && !(readl(host->base + DAVINCI_SDIOST0) & + SDIOST0_DAT1_HI)) { + writel(SDIOIST_IOINT, host->base + DAVINCI_SDIOIST); + mmc_signal_sdio_irq(host->mmc); + } + } + if (host->do_dma) { davinci_abort_dma(host); @@ -880,6 +837,7 @@ mmc_davinci_xfer_done(struct mmc_davinci_host *host, struct mmc_data *data) if (!data->stop || (host->cmd && host->cmd->error)) { mmc_request_done(host->mmc, data->mrq); writel(0, host->base + DAVINCI_MMCIM); + host->active_request = false; } else mmc_davinci_start_command(host, data->stop); } @@ -907,6 +865,7 @@ static void mmc_davinci_cmd_done(struct mmc_davinci_host *host, cmd->mrq->cmd->retries = 0; mmc_request_done(host->mmc, cmd->mrq); writel(0, host->base + DAVINCI_MMCIM); + host->active_request = false; } } @@ -932,6 +891,21 @@ davinci_abort_data(struct mmc_davinci_host *host, struct mmc_data *data) mmc_davinci_reset_ctrl(host, 0); } +static irqreturn_t mmc_davinci_sdio_irq(int irq, void *dev_id) +{ + struct mmc_davinci_host *host = dev_id; + unsigned int status; + + status = readl(host->base + DAVINCI_SDIOIST); + if (status & SDIOIST_IOINT) { + dev_dbg(mmc_dev(host->mmc), + "SDIO interrupt status %x\n", status); + writel(status | SDIOIST_IOINT, host->base + DAVINCI_SDIOIST); + mmc_signal_sdio_irq(host->mmc); + } + return IRQ_HANDLED; +} + static irqreturn_t mmc_davinci_irq(int irq, void *dev_id) { struct mmc_davinci_host *host = (struct mmc_davinci_host *)dev_id; @@ -959,12 +933,33 @@ static irqreturn_t mmc_davinci_irq(int irq, void *dev_id) * by read. So, it is not unbouned loop even in the case of * non-dma. */ - while (host->bytes_left && (status & (MMCST0_DXRDY | MMCST0_DRRDY))) { - davinci_fifo_data_trans(host, rw_threshold); - status = readl(host->base + DAVINCI_MMCST0); - if (!status) - break; - qstatus |= status; + if (host->bytes_left && (status & (MMCST0_DXRDY | MMCST0_DRRDY))) { + unsigned long im_val; + + /* + * If interrupts fire during the following loop, they will be + * handled by the handler, but the PIC will still buffer these. + * As a result, the handler will be called again to serve these + * needlessly. In order to avoid these spurious interrupts, + * keep interrupts masked during the loop. + */ + im_val = readl(host->base + DAVINCI_MMCIM); + writel(0, host->base + DAVINCI_MMCIM); + + do { + davinci_fifo_data_trans(host, rw_threshold); + status = readl(host->base + DAVINCI_MMCST0); + qstatus |= status; + } while (host->bytes_left && + (status & (MMCST0_DXRDY | MMCST0_DRRDY))); + + /* + * If an interrupt is pending, it is assumed it will fire when + * it is unmasked. This assumption is also taken when the MMCIM + * is first set. Otherwise, writing to MMCIM after reading the + * status is race-prone. + */ + writel(im_val, host->base + DAVINCI_MMCIM); } if (qstatus & MMCST0_DATDNE) { @@ -1076,11 +1071,32 @@ static int mmc_davinci_get_ro(struct mmc_host *mmc) return config->get_ro(pdev->id); } +static void mmc_davinci_enable_sdio_irq(struct mmc_host *mmc, int enable) +{ + struct mmc_davinci_host *host = mmc_priv(mmc); + + if (enable) { + if (!(readl(host->base + DAVINCI_SDIOST0) & SDIOST0_DAT1_HI)) { + writel(SDIOIST_IOINT, host->base + DAVINCI_SDIOIST); + mmc_signal_sdio_irq(host->mmc); + } else { + host->sdio_int = true; + writel(readl(host->base + DAVINCI_SDIOIEN) | + SDIOIEN_IOINTEN, host->base + DAVINCI_SDIOIEN); + } + } else { + host->sdio_int = false; + writel(readl(host->base + DAVINCI_SDIOIEN) & ~SDIOIEN_IOINTEN, + host->base + DAVINCI_SDIOIEN); + } +} + static struct mmc_host_ops mmc_davinci_ops = { .request = mmc_davinci_request, .set_ios = mmc_davinci_set_ios, .get_cd = mmc_davinci_get_cd, .get_ro = mmc_davinci_get_ro, + .enable_sdio_irq = mmc_davinci_enable_sdio_irq, }; /*----------------------------------------------------------------------*/ @@ -1145,16 +1161,86 @@ static void __init init_mmcsd_host(struct mmc_davinci_host *host) mmc_davinci_reset_ctrl(host, 0); } -static int __init davinci_mmcsd_probe(struct platform_device *pdev) +static struct platform_device_id davinci_mmc_devtype[] = { + { + .name = "dm6441-mmc", + .driver_data = MMC_CTLR_VERSION_1, + }, { + .name = "da830-mmc", + .driver_data = MMC_CTLR_VERSION_2, + }, + {}, +}; +MODULE_DEVICE_TABLE(platform, davinci_mmc_devtype); + +static const struct of_device_id davinci_mmc_dt_ids[] = { + { + .compatible = "ti,dm6441-mmc", + .data = &davinci_mmc_devtype[MMC_CTLR_VERSION_1], + }, + { + .compatible = "ti,da830-mmc", + .data = &davinci_mmc_devtype[MMC_CTLR_VERSION_2], + }, + {}, +}; +MODULE_DEVICE_TABLE(of, davinci_mmc_dt_ids); + +static struct davinci_mmc_config + *mmc_parse_pdata(struct platform_device *pdev) { + struct device_node *np; struct davinci_mmc_config *pdata = pdev->dev.platform_data; + const struct of_device_id *match = + of_match_device(davinci_mmc_dt_ids, &pdev->dev); + u32 data; + + np = pdev->dev.of_node; + if (!np) + return pdata; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(&pdev->dev, "Failed to allocate memory for struct davinci_mmc_config\n"); + goto nodata; + } + + if (match) + pdev->id_entry = match->data; + + if (of_property_read_u32(np, "max-frequency", &pdata->max_freq)) + dev_info(&pdev->dev, "'max-frequency' property not specified, defaulting to 25MHz\n"); + + of_property_read_u32(np, "bus-width", &data); + switch (data) { + case 1: + case 4: + case 8: + pdata->wires = data; + break; + default: + pdata->wires = 1; + dev_info(&pdev->dev, "Unsupported buswidth, defaulting to 1 bit\n"); + } +nodata: + return pdata; +} + +static int __init davinci_mmcsd_probe(struct platform_device *pdev) +{ + struct davinci_mmc_config *pdata = NULL; struct mmc_davinci_host *host = NULL; struct mmc_host *mmc = NULL; struct resource *r, *mem = NULL; int ret = 0, irq = 0; size_t mem_size; + const struct platform_device_id *id_entry; - /* REVISIT: when we're fully converted, fail if pdata is NULL */ + pdata = mmc_parse_pdata(pdev); + if (pdata == NULL) { + dev_err(&pdev->dev, "Couldn't get platform data\n"); + return -ENOENT; + } ret = -ENODEV; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -1178,13 +1264,15 @@ static int __init davinci_mmcsd_probe(struct platform_device *pdev) r = platform_get_resource(pdev, IORESOURCE_DMA, 0); if (!r) - goto out; - host->rxdma = r->start; + dev_warn(&pdev->dev, "RX DMA resource not specified\n"); + else + host->rxdma = r->start; r = platform_get_resource(pdev, IORESOURCE_DMA, 1); if (!r) - goto out; - host->txdma = r->start; + dev_warn(&pdev->dev, "TX DMA resource not specified\n"); + else + host->txdma = r->start; host->mem_res = mem; host->base = ioremap(mem->start, mem_size); @@ -1209,7 +1297,8 @@ static int __init davinci_mmcsd_probe(struct platform_device *pdev) host->nr_sg = MAX_NR_SG; host->use_dma = use_dma; - host->irq = irq; + host->mmc_irq = irq; + host->sdio_irq = platform_get_irq(pdev, 1); if (host->use_dma && davinci_acquire_dma_channels(host) != 0) host->use_dma = 0; @@ -1224,7 +1313,9 @@ static int __init davinci_mmcsd_probe(struct platform_device *pdev) if (pdata && (pdata->wires == 8)) mmc->caps |= (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA); - host->version = pdata->version; + id_entry = platform_get_device_id(pdev); + if (id_entry) + host->version = id_entry->driver_data; mmc->ops = &mmc_davinci_ops; mmc->f_min = 312500; @@ -1239,7 +1330,7 @@ static int __init davinci_mmcsd_probe(struct platform_device *pdev) * Each hw_seg uses one EDMA parameter RAM slot, always one * channel and then usually some linked slots. */ - mmc->max_segs = 1 + host->n_link; + mmc->max_segs = MAX_NR_SG; /* EDMA limit per hw segment (one or two MBytes) */ mmc->max_seg_size = MAX_CCNT * rw_threshold; @@ -1270,6 +1361,13 @@ static int __init davinci_mmcsd_probe(struct platform_device *pdev) if (ret) goto out; + if (host->sdio_irq >= 0) { + ret = request_irq(host->sdio_irq, mmc_davinci_sdio_irq, 0, + mmc_hostname(mmc), host); + if (!ret) + mmc->caps |= MMC_CAP_SDIO_IRQ; + } + rename_region(mem, mmc_hostname(mmc)); dev_info(mmc_dev(host->mmc), "Using %s, %d-bit mode\n", @@ -1308,12 +1406,13 @@ static int __exit davinci_mmcsd_remove(struct platform_device *pdev) { struct mmc_davinci_host *host = platform_get_drvdata(pdev); - platform_set_drvdata(pdev, NULL); if (host) { mmc_davinci_cpufreq_deregister(host); mmc_remove_host(host->mmc); - free_irq(host->irq, host); + free_irq(host->mmc_irq, host); + if (host->mmc->caps & MMC_CAP_SDIO_IRQ) + free_irq(host->sdio_irq, host); davinci_release_dma_channels(host); @@ -1335,42 +1434,23 @@ static int davinci_mmcsd_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct mmc_davinci_host *host = platform_get_drvdata(pdev); - int ret; - mmc_host_enable(host->mmc); - ret = mmc_suspend_host(host->mmc); - if (!ret) { - writel(0, host->base + DAVINCI_MMCIM); - mmc_davinci_reset_ctrl(host, 1); - mmc_host_disable(host->mmc); - clk_disable(host->clk); - host->suspended = 1; - } else { - host->suspended = 0; - mmc_host_disable(host->mmc); - } + writel(0, host->base + DAVINCI_MMCIM); + mmc_davinci_reset_ctrl(host, 1); + clk_disable(host->clk); - return ret; + return 0; } static int davinci_mmcsd_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct mmc_davinci_host *host = platform_get_drvdata(pdev); - int ret; - - if (!host->suspended) - return 0; clk_enable(host->clk); - mmc_host_enable(host->mmc); - mmc_davinci_reset_ctrl(host, 0); - ret = mmc_resume_host(host->mmc); - if (!ret) - host->suspended = 0; - return ret; + return 0; } static const struct dev_pm_ops davinci_mmcsd_pm = { @@ -1388,24 +1468,16 @@ static struct platform_driver davinci_mmcsd_driver = { .name = "davinci_mmc", .owner = THIS_MODULE, .pm = davinci_mmcsd_pm_ops, + .of_match_table = davinci_mmc_dt_ids, }, .remove = __exit_p(davinci_mmcsd_remove), + .id_table = davinci_mmc_devtype, }; -static int __init davinci_mmcsd_init(void) -{ - return platform_driver_probe(&davinci_mmcsd_driver, - davinci_mmcsd_probe); -} -module_init(davinci_mmcsd_init); - -static void __exit davinci_mmcsd_exit(void) -{ - platform_driver_unregister(&davinci_mmcsd_driver); -} -module_exit(davinci_mmcsd_exit); +module_platform_driver_probe(davinci_mmcsd_driver, davinci_mmcsd_probe); MODULE_AUTHOR("Texas Instruments India"); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("MMC/SD driver for Davinci MMC controller"); +MODULE_ALIAS("platform:davinci_mmc"); diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c new file mode 100644 index 00000000000..0fbc53ac7ea --- /dev/null +++ b/drivers/mmc/host/dw_mmc-exynos.c @@ -0,0 +1,450 @@ +/* + * Exynos Specific Extensions for Synopsys DW Multimedia Card Interface driver + * + * Copyright (C) 2012, Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/mmc/host.h> +#include <linux/mmc/dw_mmc.h> +#include <linux/mmc/mmc.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/slab.h> + +#include "dw_mmc.h" +#include "dw_mmc-pltfm.h" + +#define NUM_PINS(x) (x + 2) + +#define SDMMC_CLKSEL 0x09C +#define SDMMC_CLKSEL_CCLK_SAMPLE(x) (((x) & 7) << 0) +#define SDMMC_CLKSEL_CCLK_DRIVE(x) (((x) & 7) << 16) +#define SDMMC_CLKSEL_CCLK_DIVIDER(x) (((x) & 7) << 24) +#define SDMMC_CLKSEL_GET_DRV_WD3(x) (((x) >> 16) & 0x7) +#define SDMMC_CLKSEL_TIMING(x, y, z) (SDMMC_CLKSEL_CCLK_SAMPLE(x) | \ + SDMMC_CLKSEL_CCLK_DRIVE(y) | \ + SDMMC_CLKSEL_CCLK_DIVIDER(z)) +#define SDMMC_CLKSEL_WAKEUP_INT BIT(11) + +#define EXYNOS4210_FIXED_CIU_CLK_DIV 2 +#define EXYNOS4412_FIXED_CIU_CLK_DIV 4 + +/* Block number in eMMC */ +#define DWMCI_BLOCK_NUM 0xFFFFFFFF + +#define SDMMC_EMMCP_BASE 0x1000 +#define SDMMC_MPSECURITY (SDMMC_EMMCP_BASE + 0x0010) +#define SDMMC_MPSBEGIN0 (SDMMC_EMMCP_BASE + 0x0200) +#define SDMMC_MPSEND0 (SDMMC_EMMCP_BASE + 0x0204) +#define SDMMC_MPSCTRL0 (SDMMC_EMMCP_BASE + 0x020C) + +/* SMU control bits */ +#define DWMCI_MPSCTRL_SECURE_READ_BIT BIT(7) +#define DWMCI_MPSCTRL_SECURE_WRITE_BIT BIT(6) +#define DWMCI_MPSCTRL_NON_SECURE_READ_BIT BIT(5) +#define DWMCI_MPSCTRL_NON_SECURE_WRITE_BIT BIT(4) +#define DWMCI_MPSCTRL_USE_FUSE_KEY BIT(3) +#define DWMCI_MPSCTRL_ECB_MODE BIT(2) +#define DWMCI_MPSCTRL_ENCRYPTION BIT(1) +#define DWMCI_MPSCTRL_VALID BIT(0) + +#define EXYNOS_CCLKIN_MIN 50000000 /* unit: HZ */ + +/* Variations in Exynos specific dw-mshc controller */ +enum dw_mci_exynos_type { + DW_MCI_TYPE_EXYNOS4210, + DW_MCI_TYPE_EXYNOS4412, + DW_MCI_TYPE_EXYNOS5250, + DW_MCI_TYPE_EXYNOS5420, + DW_MCI_TYPE_EXYNOS5420_SMU, +}; + +/* Exynos implementation specific driver private data */ +struct dw_mci_exynos_priv_data { + enum dw_mci_exynos_type ctrl_type; + u8 ciu_div; + u32 sdr_timing; + u32 ddr_timing; + u32 cur_speed; +}; + +static struct dw_mci_exynos_compatible { + char *compatible; + enum dw_mci_exynos_type ctrl_type; +} exynos_compat[] = { + { + .compatible = "samsung,exynos4210-dw-mshc", + .ctrl_type = DW_MCI_TYPE_EXYNOS4210, + }, { + .compatible = "samsung,exynos4412-dw-mshc", + .ctrl_type = DW_MCI_TYPE_EXYNOS4412, + }, { + .compatible = "samsung,exynos5250-dw-mshc", + .ctrl_type = DW_MCI_TYPE_EXYNOS5250, + }, { + .compatible = "samsung,exynos5420-dw-mshc", + .ctrl_type = DW_MCI_TYPE_EXYNOS5420, + }, { + .compatible = "samsung,exynos5420-dw-mshc-smu", + .ctrl_type = DW_MCI_TYPE_EXYNOS5420_SMU, + }, +}; + +static int dw_mci_exynos_priv_init(struct dw_mci *host) +{ + struct dw_mci_exynos_priv_data *priv = host->priv; + + if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS5420_SMU) { + mci_writel(host, MPSBEGIN0, 0); + mci_writel(host, MPSEND0, DWMCI_BLOCK_NUM); + mci_writel(host, MPSCTRL0, DWMCI_MPSCTRL_SECURE_WRITE_BIT | + DWMCI_MPSCTRL_NON_SECURE_READ_BIT | + DWMCI_MPSCTRL_VALID | + DWMCI_MPSCTRL_NON_SECURE_WRITE_BIT); + } + + return 0; +} + +static int dw_mci_exynos_setup_clock(struct dw_mci *host) +{ + struct dw_mci_exynos_priv_data *priv = host->priv; + unsigned long rate = clk_get_rate(host->ciu_clk); + + host->bus_hz = rate / (priv->ciu_div + 1); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int dw_mci_exynos_suspend(struct device *dev) +{ + struct dw_mci *host = dev_get_drvdata(dev); + + return dw_mci_suspend(host); +} + +static int dw_mci_exynos_resume(struct device *dev) +{ + struct dw_mci *host = dev_get_drvdata(dev); + + dw_mci_exynos_priv_init(host); + return dw_mci_resume(host); +} + +/** + * dw_mci_exynos_resume_noirq - Exynos-specific resume code + * + * On exynos5420 there is a silicon errata that will sometimes leave the + * WAKEUP_INT bit in the CLKSEL register asserted. This bit is 1 to indicate + * that it fired and we can clear it by writing a 1 back. Clear it to prevent + * interrupts from going off constantly. + * + * We run this code on all exynos variants because it doesn't hurt. + */ + +static int dw_mci_exynos_resume_noirq(struct device *dev) +{ + struct dw_mci *host = dev_get_drvdata(dev); + u32 clksel; + + clksel = mci_readl(host, CLKSEL); + if (clksel & SDMMC_CLKSEL_WAKEUP_INT) + mci_writel(host, CLKSEL, clksel); + + return 0; +} +#else +#define dw_mci_exynos_suspend NULL +#define dw_mci_exynos_resume NULL +#define dw_mci_exynos_resume_noirq NULL +#endif /* CONFIG_PM_SLEEP */ + +static void dw_mci_exynos_prepare_command(struct dw_mci *host, u32 *cmdr) +{ + /* + * Exynos4412 and Exynos5250 extends the use of CMD register with the + * use of bit 29 (which is reserved on standard MSHC controllers) for + * optionally bypassing the HOLD register for command and data. The + * HOLD register should be bypassed in case there is no phase shift + * applied on CMD/DATA that is sent to the card. + */ + if (SDMMC_CLKSEL_GET_DRV_WD3(mci_readl(host, CLKSEL))) + *cmdr |= SDMMC_CMD_USE_HOLD_REG; +} + +static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios) +{ + struct dw_mci_exynos_priv_data *priv = host->priv; + unsigned int wanted = ios->clock; + unsigned long actual; + u8 div = priv->ciu_div + 1; + + if (ios->timing == MMC_TIMING_MMC_DDR52) { + mci_writel(host, CLKSEL, priv->ddr_timing); + /* Should be double rate for DDR mode */ + if (ios->bus_width == MMC_BUS_WIDTH_8) + wanted <<= 1; + } else { + mci_writel(host, CLKSEL, priv->sdr_timing); + } + + /* Don't care if wanted clock is zero */ + if (!wanted) + return; + + /* Guaranteed minimum frequency for cclkin */ + if (wanted < EXYNOS_CCLKIN_MIN) + wanted = EXYNOS_CCLKIN_MIN; + + if (wanted != priv->cur_speed) { + int ret = clk_set_rate(host->ciu_clk, wanted * div); + if (ret) + dev_warn(host->dev, + "failed to set clk-rate %u error: %d\n", + wanted * div, ret); + actual = clk_get_rate(host->ciu_clk); + host->bus_hz = actual / div; + priv->cur_speed = wanted; + host->current_speed = 0; + } +} + +static int dw_mci_exynos_parse_dt(struct dw_mci *host) +{ + struct dw_mci_exynos_priv_data *priv; + struct device_node *np = host->dev->of_node; + u32 timing[2]; + u32 div = 0; + int idx; + int ret; + + priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) { + dev_err(host->dev, "mem alloc failed for private data\n"); + return -ENOMEM; + } + + for (idx = 0; idx < ARRAY_SIZE(exynos_compat); idx++) { + if (of_device_is_compatible(np, exynos_compat[idx].compatible)) + priv->ctrl_type = exynos_compat[idx].ctrl_type; + } + + if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4412) + priv->ciu_div = EXYNOS4412_FIXED_CIU_CLK_DIV - 1; + else if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4210) + priv->ciu_div = EXYNOS4210_FIXED_CIU_CLK_DIV - 1; + else { + of_property_read_u32(np, "samsung,dw-mshc-ciu-div", &div); + priv->ciu_div = div; + } + + ret = of_property_read_u32_array(np, + "samsung,dw-mshc-sdr-timing", timing, 2); + if (ret) + return ret; + + priv->sdr_timing = SDMMC_CLKSEL_TIMING(timing[0], timing[1], div); + + ret = of_property_read_u32_array(np, + "samsung,dw-mshc-ddr-timing", timing, 2); + if (ret) + return ret; + + priv->ddr_timing = SDMMC_CLKSEL_TIMING(timing[0], timing[1], div); + host->priv = priv; + return 0; +} + +static inline u8 dw_mci_exynos_get_clksmpl(struct dw_mci *host) +{ + return SDMMC_CLKSEL_CCLK_SAMPLE(mci_readl(host, CLKSEL)); +} + +static inline void dw_mci_exynos_set_clksmpl(struct dw_mci *host, u8 sample) +{ + u32 clksel; + clksel = mci_readl(host, CLKSEL); + clksel = (clksel & ~0x7) | SDMMC_CLKSEL_CCLK_SAMPLE(sample); + mci_writel(host, CLKSEL, clksel); +} + +static inline u8 dw_mci_exynos_move_next_clksmpl(struct dw_mci *host) +{ + u32 clksel; + u8 sample; + + clksel = mci_readl(host, CLKSEL); + sample = (clksel + 1) & 0x7; + clksel = (clksel & ~0x7) | sample; + mci_writel(host, CLKSEL, clksel); + return sample; +} + +static s8 dw_mci_exynos_get_best_clksmpl(u8 candiates) +{ + const u8 iter = 8; + u8 __c; + s8 i, loc = -1; + + for (i = 0; i < iter; i++) { + __c = ror8(candiates, i); + if ((__c & 0xc7) == 0xc7) { + loc = i; + goto out; + } + } + + for (i = 0; i < iter; i++) { + __c = ror8(candiates, i); + if ((__c & 0x83) == 0x83) { + loc = i; + goto out; + } + } + +out: + return loc; +} + +static int dw_mci_exynos_execute_tuning(struct dw_mci_slot *slot, u32 opcode, + struct dw_mci_tuning_data *tuning_data) +{ + struct dw_mci *host = slot->host; + struct mmc_host *mmc = slot->mmc; + const u8 *blk_pattern = tuning_data->blk_pattern; + u8 *blk_test; + unsigned int blksz = tuning_data->blksz; + u8 start_smpl, smpl, candiates = 0; + s8 found = -1; + int ret = 0; + + blk_test = kmalloc(blksz, GFP_KERNEL); + if (!blk_test) + return -ENOMEM; + + start_smpl = dw_mci_exynos_get_clksmpl(host); + + do { + struct mmc_request mrq = {NULL}; + struct mmc_command cmd = {0}; + struct mmc_command stop = {0}; + struct mmc_data data = {0}; + struct scatterlist sg; + + cmd.opcode = opcode; + cmd.arg = 0; + cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; + + stop.opcode = MMC_STOP_TRANSMISSION; + stop.arg = 0; + stop.flags = MMC_RSP_R1B | MMC_CMD_AC; + + data.blksz = blksz; + data.blocks = 1; + data.flags = MMC_DATA_READ; + data.sg = &sg; + data.sg_len = 1; + + sg_init_one(&sg, blk_test, blksz); + mrq.cmd = &cmd; + mrq.stop = &stop; + mrq.data = &data; + host->mrq = &mrq; + + mci_writel(host, TMOUT, ~0); + smpl = dw_mci_exynos_move_next_clksmpl(host); + + mmc_wait_for_req(mmc, &mrq); + + if (!cmd.error && !data.error) { + if (!memcmp(blk_pattern, blk_test, blksz)) + candiates |= (1 << smpl); + } else { + dev_dbg(host->dev, + "Tuning error: cmd.error:%d, data.error:%d\n", + cmd.error, data.error); + } + } while (start_smpl != smpl); + + found = dw_mci_exynos_get_best_clksmpl(candiates); + if (found >= 0) + dw_mci_exynos_set_clksmpl(host, found); + else + ret = -EIO; + + kfree(blk_test); + return ret; +} + +/* Common capabilities of Exynos4/Exynos5 SoC */ +static unsigned long exynos_dwmmc_caps[4] = { + MMC_CAP_1_8V_DDR | MMC_CAP_8_BIT_DATA | MMC_CAP_CMD23, + MMC_CAP_CMD23, + MMC_CAP_CMD23, + MMC_CAP_CMD23, +}; + +static const struct dw_mci_drv_data exynos_drv_data = { + .caps = exynos_dwmmc_caps, + .init = dw_mci_exynos_priv_init, + .setup_clock = dw_mci_exynos_setup_clock, + .prepare_command = dw_mci_exynos_prepare_command, + .set_ios = dw_mci_exynos_set_ios, + .parse_dt = dw_mci_exynos_parse_dt, + .execute_tuning = dw_mci_exynos_execute_tuning, +}; + +static const struct of_device_id dw_mci_exynos_match[] = { + { .compatible = "samsung,exynos4412-dw-mshc", + .data = &exynos_drv_data, }, + { .compatible = "samsung,exynos5250-dw-mshc", + .data = &exynos_drv_data, }, + { .compatible = "samsung,exynos5420-dw-mshc", + .data = &exynos_drv_data, }, + { .compatible = "samsung,exynos5420-dw-mshc-smu", + .data = &exynos_drv_data, }, + {}, +}; +MODULE_DEVICE_TABLE(of, dw_mci_exynos_match); + +static int dw_mci_exynos_probe(struct platform_device *pdev) +{ + const struct dw_mci_drv_data *drv_data; + const struct of_device_id *match; + + match = of_match_node(dw_mci_exynos_match, pdev->dev.of_node); + drv_data = match->data; + return dw_mci_pltfm_register(pdev, drv_data); +} + +static const struct dev_pm_ops dw_mci_exynos_pmops = { + SET_SYSTEM_SLEEP_PM_OPS(dw_mci_exynos_suspend, dw_mci_exynos_resume) + .resume_noirq = dw_mci_exynos_resume_noirq, + .thaw_noirq = dw_mci_exynos_resume_noirq, + .restore_noirq = dw_mci_exynos_resume_noirq, +}; + +static struct platform_driver dw_mci_exynos_pltfm_driver = { + .probe = dw_mci_exynos_probe, + .remove = __exit_p(dw_mci_pltfm_remove), + .driver = { + .name = "dwmmc_exynos", + .of_match_table = dw_mci_exynos_match, + .pm = &dw_mci_exynos_pmops, + }, +}; + +module_platform_driver(dw_mci_exynos_pltfm_driver); + +MODULE_DESCRIPTION("Samsung Specific DW-MSHC Driver Extension"); +MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:dwmmc-exynos"); diff --git a/drivers/mmc/host/dw_mmc-k3.c b/drivers/mmc/host/dw_mmc-k3.c new file mode 100644 index 00000000000..650f9cc3f7a --- /dev/null +++ b/drivers/mmc/host/dw_mmc-k3.c @@ -0,0 +1,97 @@ +/* + * Copyright (c) 2013 Linaro Ltd. + * Copyright (c) 2013 Hisilicon Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/mmc/host.h> +#include <linux/mmc/dw_mmc.h> +#include <linux/of_address.h> + +#include "dw_mmc.h" +#include "dw_mmc-pltfm.h" + +static void dw_mci_k3_set_ios(struct dw_mci *host, struct mmc_ios *ios) +{ + int ret; + + ret = clk_set_rate(host->ciu_clk, ios->clock); + if (ret) + dev_warn(host->dev, "failed to set rate %uHz\n", ios->clock); + + host->bus_hz = clk_get_rate(host->ciu_clk); +} + +static const struct dw_mci_drv_data k3_drv_data = { + .set_ios = dw_mci_k3_set_ios, +}; + +static const struct of_device_id dw_mci_k3_match[] = { + { .compatible = "hisilicon,hi4511-dw-mshc", .data = &k3_drv_data, }, + {}, +}; +MODULE_DEVICE_TABLE(of, dw_mci_k3_match); + +static int dw_mci_k3_probe(struct platform_device *pdev) +{ + const struct dw_mci_drv_data *drv_data; + const struct of_device_id *match; + + match = of_match_node(dw_mci_k3_match, pdev->dev.of_node); + drv_data = match->data; + + return dw_mci_pltfm_register(pdev, drv_data); +} + +#ifdef CONFIG_PM_SLEEP +static int dw_mci_k3_suspend(struct device *dev) +{ + struct dw_mci *host = dev_get_drvdata(dev); + int ret; + + ret = dw_mci_suspend(host); + if (!ret) + clk_disable_unprepare(host->ciu_clk); + + return ret; +} + +static int dw_mci_k3_resume(struct device *dev) +{ + struct dw_mci *host = dev_get_drvdata(dev); + int ret; + + ret = clk_prepare_enable(host->ciu_clk); + if (ret) { + dev_err(host->dev, "failed to enable ciu clock\n"); + return ret; + } + + return dw_mci_resume(host); +} +#endif /* CONFIG_PM_SLEEP */ + +static SIMPLE_DEV_PM_OPS(dw_mci_k3_pmops, dw_mci_k3_suspend, dw_mci_k3_resume); + +static struct platform_driver dw_mci_k3_pltfm_driver = { + .probe = dw_mci_k3_probe, + .remove = dw_mci_pltfm_remove, + .driver = { + .name = "dwmmc_k3", + .of_match_table = dw_mci_k3_match, + .pm = &dw_mci_k3_pmops, + }, +}; + +module_platform_driver(dw_mci_k3_pltfm_driver); + +MODULE_DESCRIPTION("K3 Specific DW-MSHC Driver Extension"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:dwmmc-k3"); diff --git a/drivers/mmc/host/dw_mmc-pci.c b/drivers/mmc/host/dw_mmc-pci.c new file mode 100644 index 00000000000..f70546a3a7c --- /dev/null +++ b/drivers/mmc/host/dw_mmc-pci.c @@ -0,0 +1,125 @@ +/* + * Synopsys DesignWare Multimedia Card PCI Interface driver + * + * Copyright (C) 2012 Vayavya Labs Pvt. Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/mmc/host.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/dw_mmc.h> +#include "dw_mmc.h" + +#define PCI_BAR_NO 2 +#define SYNOPSYS_DW_MCI_VENDOR_ID 0x700 +#define SYNOPSYS_DW_MCI_DEVICE_ID 0x1107 +/* Defining the Capabilities */ +#define DW_MCI_CAPABILITIES (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED |\ + MMC_CAP_SD_HIGHSPEED | MMC_CAP_8_BIT_DATA |\ + MMC_CAP_SDIO_IRQ) + +static struct dw_mci_board pci_board_data = { + .num_slots = 1, + .caps = DW_MCI_CAPABILITIES, + .bus_hz = 33 * 1000 * 1000, + .detect_delay_ms = 200, + .fifo_depth = 32, +}; + +static int dw_mci_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *entries) +{ + struct dw_mci *host; + int ret; + + ret = pcim_enable_device(pdev); + if (ret) + return ret; + + host = devm_kzalloc(&pdev->dev, sizeof(struct dw_mci), GFP_KERNEL); + if (!host) + return -ENOMEM; + + host->irq = pdev->irq; + host->irq_flags = IRQF_SHARED; + host->dev = &pdev->dev; + host->pdata = &pci_board_data; + + ret = pcim_iomap_regions(pdev, 1 << PCI_BAR_NO, pci_name(pdev)); + if (ret) + return ret; + + host->regs = pcim_iomap_table(pdev)[PCI_BAR_NO]; + + pci_set_master(pdev); + + ret = dw_mci_probe(host); + if (ret) + return ret; + + pci_set_drvdata(pdev, host); + + return 0; +} + +static void dw_mci_pci_remove(struct pci_dev *pdev) +{ + struct dw_mci *host = pci_get_drvdata(pdev); + + dw_mci_remove(host); +} + +#ifdef CONFIG_PM_SLEEP +static int dw_mci_pci_suspend(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct dw_mci *host = pci_get_drvdata(pdev); + + return dw_mci_suspend(host); +} + +static int dw_mci_pci_resume(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct dw_mci *host = pci_get_drvdata(pdev); + + return dw_mci_resume(host); +} +#else +#define dw_mci_pci_suspend NULL +#define dw_mci_pci_resume NULL +#endif /* CONFIG_PM_SLEEP */ + +static SIMPLE_DEV_PM_OPS(dw_mci_pci_pmops, dw_mci_pci_suspend, dw_mci_pci_resume); + +static DEFINE_PCI_DEVICE_TABLE(dw_mci_pci_id) = { + { PCI_DEVICE(SYNOPSYS_DW_MCI_VENDOR_ID, SYNOPSYS_DW_MCI_DEVICE_ID) }, + {} +}; +MODULE_DEVICE_TABLE(pci, dw_mci_pci_id); + +static struct pci_driver dw_mci_pci_driver = { + .name = "dw_mmc_pci", + .id_table = dw_mci_pci_id, + .probe = dw_mci_pci_probe, + .remove = dw_mci_pci_remove, + .driver = { + .pm = &dw_mci_pci_pmops + }, +}; + +module_pci_driver(dw_mci_pci_driver); + +MODULE_DESCRIPTION("DW Multimedia Card PCI Interface driver"); +MODULE_AUTHOR("Shashidhar Hiremath <shashidharh@vayavyalabs.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c new file mode 100644 index 00000000000..d4a47a9f558 --- /dev/null +++ b/drivers/mmc/host/dw_mmc-pltfm.c @@ -0,0 +1,142 @@ +/* + * Synopsys DesignWare Multimedia Card Interface driver + * + * Copyright (C) 2009 NXP Semiconductors + * Copyright (C) 2009, 2010 Imagination Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/mmc/host.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/dw_mmc.h> +#include <linux/of.h> + +#include "dw_mmc.h" +#include "dw_mmc-pltfm.h" + +static void dw_mci_pltfm_prepare_command(struct dw_mci *host, u32 *cmdr) +{ + *cmdr |= SDMMC_CMD_USE_HOLD_REG; +} + +static const struct dw_mci_drv_data rockchip_drv_data = { + .prepare_command = dw_mci_pltfm_prepare_command, +}; + +static const struct dw_mci_drv_data socfpga_drv_data = { + .prepare_command = dw_mci_pltfm_prepare_command, +}; + +int dw_mci_pltfm_register(struct platform_device *pdev, + const struct dw_mci_drv_data *drv_data) +{ + struct dw_mci *host; + struct resource *regs; + + host = devm_kzalloc(&pdev->dev, sizeof(struct dw_mci), GFP_KERNEL); + if (!host) + return -ENOMEM; + + host->irq = platform_get_irq(pdev, 0); + if (host->irq < 0) + return host->irq; + + host->drv_data = drv_data; + host->dev = &pdev->dev; + host->irq_flags = 0; + host->pdata = pdev->dev.platform_data; + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + host->regs = devm_ioremap_resource(&pdev->dev, regs); + if (IS_ERR(host->regs)) + return PTR_ERR(host->regs); + + platform_set_drvdata(pdev, host); + return dw_mci_probe(host); +} +EXPORT_SYMBOL_GPL(dw_mci_pltfm_register); + +#ifdef CONFIG_PM_SLEEP +/* + * TODO: we should probably disable the clock to the card in the suspend path. + */ +static int dw_mci_pltfm_suspend(struct device *dev) +{ + struct dw_mci *host = dev_get_drvdata(dev); + + return dw_mci_suspend(host); +} + +static int dw_mci_pltfm_resume(struct device *dev) +{ + struct dw_mci *host = dev_get_drvdata(dev); + + return dw_mci_resume(host); +} +#else +#define dw_mci_pltfm_suspend NULL +#define dw_mci_pltfm_resume NULL +#endif /* CONFIG_PM_SLEEP */ + +SIMPLE_DEV_PM_OPS(dw_mci_pltfm_pmops, dw_mci_pltfm_suspend, dw_mci_pltfm_resume); +EXPORT_SYMBOL_GPL(dw_mci_pltfm_pmops); + +static const struct of_device_id dw_mci_pltfm_match[] = { + { .compatible = "snps,dw-mshc", }, + { .compatible = "rockchip,rk2928-dw-mshc", + .data = &rockchip_drv_data }, + { .compatible = "altr,socfpga-dw-mshc", + .data = &socfpga_drv_data }, + {}, +}; +MODULE_DEVICE_TABLE(of, dw_mci_pltfm_match); + +static int dw_mci_pltfm_probe(struct platform_device *pdev) +{ + const struct dw_mci_drv_data *drv_data = NULL; + const struct of_device_id *match; + + if (pdev->dev.of_node) { + match = of_match_node(dw_mci_pltfm_match, pdev->dev.of_node); + drv_data = match->data; + } + + return dw_mci_pltfm_register(pdev, drv_data); +} + +int dw_mci_pltfm_remove(struct platform_device *pdev) +{ + struct dw_mci *host = platform_get_drvdata(pdev); + + dw_mci_remove(host); + return 0; +} +EXPORT_SYMBOL_GPL(dw_mci_pltfm_remove); + +static struct platform_driver dw_mci_pltfm_driver = { + .probe = dw_mci_pltfm_probe, + .remove = dw_mci_pltfm_remove, + .driver = { + .name = "dw_mmc", + .of_match_table = dw_mci_pltfm_match, + .pm = &dw_mci_pltfm_pmops, + }, +}; + +module_platform_driver(dw_mci_pltfm_driver); + +MODULE_DESCRIPTION("DW Multimedia Card Interface driver"); +MODULE_AUTHOR("NXP Semiconductor VietNam"); +MODULE_AUTHOR("Imagination Technologies Ltd"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/dw_mmc-pltfm.h b/drivers/mmc/host/dw_mmc-pltfm.h new file mode 100644 index 00000000000..68e7fd2f614 --- /dev/null +++ b/drivers/mmc/host/dw_mmc-pltfm.h @@ -0,0 +1,20 @@ +/* + * Synopsys DesignWare Multimedia Card Interface Platform driver + * + * Copyright (C) 2012, Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _DW_MMC_PLTFM_H_ +#define _DW_MMC_PLTFM_H_ + +extern int dw_mci_pltfm_register(struct platform_device *pdev, + const struct dw_mci_drv_data *drv_data); +extern int dw_mci_pltfm_remove(struct platform_device *pdev); +extern const struct dev_pm_ops dw_mci_pltfm_pmops; + +#endif /* _DW_MMC_PLTFM_H_ */ diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c new file mode 100644 index 00000000000..1ac227c603b --- /dev/null +++ b/drivers/mmc/host/dw_mmc.c @@ -0,0 +1,2669 @@ +/* + * Synopsys DesignWare Multimedia Card Interface driver + * (Based on NXP driver for lpc 31xx) + * + * Copyright (C) 2009 NXP Semiconductors + * Copyright (C) 2009, 2010 Imagination Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/blkdev.h> +#include <linux/clk.h> +#include <linux/debugfs.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/seq_file.h> +#include <linux/slab.h> +#include <linux/stat.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/mmc/host.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/sdio.h> +#include <linux/mmc/dw_mmc.h> +#include <linux/bitops.h> +#include <linux/regulator/consumer.h> +#include <linux/workqueue.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/mmc/slot-gpio.h> + +#include "dw_mmc.h" + +/* Common flag combinations */ +#define DW_MCI_DATA_ERROR_FLAGS (SDMMC_INT_DRTO | SDMMC_INT_DCRC | \ + SDMMC_INT_HTO | SDMMC_INT_SBE | \ + SDMMC_INT_EBE) +#define DW_MCI_CMD_ERROR_FLAGS (SDMMC_INT_RTO | SDMMC_INT_RCRC | \ + SDMMC_INT_RESP_ERR) +#define DW_MCI_ERROR_FLAGS (DW_MCI_DATA_ERROR_FLAGS | \ + DW_MCI_CMD_ERROR_FLAGS | SDMMC_INT_HLE) +#define DW_MCI_SEND_STATUS 1 +#define DW_MCI_RECV_STATUS 2 +#define DW_MCI_DMA_THRESHOLD 16 + +#define DW_MCI_FREQ_MAX 200000000 /* unit: HZ */ +#define DW_MCI_FREQ_MIN 400000 /* unit: HZ */ + +#ifdef CONFIG_MMC_DW_IDMAC +#define IDMAC_INT_CLR (SDMMC_IDMAC_INT_AI | SDMMC_IDMAC_INT_NI | \ + SDMMC_IDMAC_INT_CES | SDMMC_IDMAC_INT_DU | \ + SDMMC_IDMAC_INT_FBE | SDMMC_IDMAC_INT_RI | \ + SDMMC_IDMAC_INT_TI) + +struct idmac_desc { + u32 des0; /* Control Descriptor */ +#define IDMAC_DES0_DIC BIT(1) +#define IDMAC_DES0_LD BIT(2) +#define IDMAC_DES0_FD BIT(3) +#define IDMAC_DES0_CH BIT(4) +#define IDMAC_DES0_ER BIT(5) +#define IDMAC_DES0_CES BIT(30) +#define IDMAC_DES0_OWN BIT(31) + + u32 des1; /* Buffer sizes */ +#define IDMAC_SET_BUFFER1_SIZE(d, s) \ + ((d)->des1 = ((d)->des1 & 0x03ffe000) | ((s) & 0x1fff)) + + u32 des2; /* buffer 1 physical address */ + + u32 des3; /* buffer 2 physical address */ +}; +#endif /* CONFIG_MMC_DW_IDMAC */ + +static const u8 tuning_blk_pattern_4bit[] = { + 0xff, 0x0f, 0xff, 0x00, 0xff, 0xcc, 0xc3, 0xcc, + 0xc3, 0x3c, 0xcc, 0xff, 0xfe, 0xff, 0xfe, 0xef, + 0xff, 0xdf, 0xff, 0xdd, 0xff, 0xfb, 0xff, 0xfb, + 0xbf, 0xff, 0x7f, 0xff, 0x77, 0xf7, 0xbd, 0xef, + 0xff, 0xf0, 0xff, 0xf0, 0x0f, 0xfc, 0xcc, 0x3c, + 0xcc, 0x33, 0xcc, 0xcf, 0xff, 0xef, 0xff, 0xee, + 0xff, 0xfd, 0xff, 0xfd, 0xdf, 0xff, 0xbf, 0xff, + 0xbb, 0xff, 0xf7, 0xff, 0xf7, 0x7f, 0x7b, 0xde, +}; + +static const u8 tuning_blk_pattern_8bit[] = { + 0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00, 0x00, + 0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc, 0xcc, + 0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff, 0xff, + 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee, 0xff, + 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd, 0xdd, + 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff, 0xbb, + 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff, 0xff, + 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee, 0xff, + 0xff, 0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00, + 0x00, 0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc, + 0xcc, 0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff, + 0xff, 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee, + 0xff, 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd, + 0xdd, 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff, + 0xbb, 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff, + 0xff, 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee, +}; + +static inline bool dw_mci_fifo_reset(struct dw_mci *host); +static inline bool dw_mci_ctrl_all_reset(struct dw_mci *host); + +#if defined(CONFIG_DEBUG_FS) +static int dw_mci_req_show(struct seq_file *s, void *v) +{ + struct dw_mci_slot *slot = s->private; + struct mmc_request *mrq; + struct mmc_command *cmd; + struct mmc_command *stop; + struct mmc_data *data; + + /* Make sure we get a consistent snapshot */ + spin_lock_bh(&slot->host->lock); + mrq = slot->mrq; + + if (mrq) { + cmd = mrq->cmd; + data = mrq->data; + stop = mrq->stop; + + if (cmd) + seq_printf(s, + "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n", + cmd->opcode, cmd->arg, cmd->flags, + cmd->resp[0], cmd->resp[1], cmd->resp[2], + cmd->resp[2], cmd->error); + if (data) + seq_printf(s, "DATA %u / %u * %u flg %x err %d\n", + data->bytes_xfered, data->blocks, + data->blksz, data->flags, data->error); + if (stop) + seq_printf(s, + "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n", + stop->opcode, stop->arg, stop->flags, + stop->resp[0], stop->resp[1], stop->resp[2], + stop->resp[2], stop->error); + } + + spin_unlock_bh(&slot->host->lock); + + return 0; +} + +static int dw_mci_req_open(struct inode *inode, struct file *file) +{ + return single_open(file, dw_mci_req_show, inode->i_private); +} + +static const struct file_operations dw_mci_req_fops = { + .owner = THIS_MODULE, + .open = dw_mci_req_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int dw_mci_regs_show(struct seq_file *s, void *v) +{ + seq_printf(s, "STATUS:\t0x%08x\n", SDMMC_STATUS); + seq_printf(s, "RINTSTS:\t0x%08x\n", SDMMC_RINTSTS); + seq_printf(s, "CMD:\t0x%08x\n", SDMMC_CMD); + seq_printf(s, "CTRL:\t0x%08x\n", SDMMC_CTRL); + seq_printf(s, "INTMASK:\t0x%08x\n", SDMMC_INTMASK); + seq_printf(s, "CLKENA:\t0x%08x\n", SDMMC_CLKENA); + + return 0; +} + +static int dw_mci_regs_open(struct inode *inode, struct file *file) +{ + return single_open(file, dw_mci_regs_show, inode->i_private); +} + +static const struct file_operations dw_mci_regs_fops = { + .owner = THIS_MODULE, + .open = dw_mci_regs_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static void dw_mci_init_debugfs(struct dw_mci_slot *slot) +{ + struct mmc_host *mmc = slot->mmc; + struct dw_mci *host = slot->host; + struct dentry *root; + struct dentry *node; + + root = mmc->debugfs_root; + if (!root) + return; + + node = debugfs_create_file("regs", S_IRUSR, root, host, + &dw_mci_regs_fops); + if (!node) + goto err; + + node = debugfs_create_file("req", S_IRUSR, root, slot, + &dw_mci_req_fops); + if (!node) + goto err; + + node = debugfs_create_u32("state", S_IRUSR, root, (u32 *)&host->state); + if (!node) + goto err; + + node = debugfs_create_x32("pending_events", S_IRUSR, root, + (u32 *)&host->pending_events); + if (!node) + goto err; + + node = debugfs_create_x32("completed_events", S_IRUSR, root, + (u32 *)&host->completed_events); + if (!node) + goto err; + + return; + +err: + dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n"); +} +#endif /* defined(CONFIG_DEBUG_FS) */ + +static u32 dw_mci_prepare_command(struct mmc_host *mmc, struct mmc_command *cmd) +{ + struct mmc_data *data; + struct dw_mci_slot *slot = mmc_priv(mmc); + const struct dw_mci_drv_data *drv_data = slot->host->drv_data; + u32 cmdr; + cmd->error = -EINPROGRESS; + + cmdr = cmd->opcode; + + if (cmd->opcode == MMC_STOP_TRANSMISSION || + cmd->opcode == MMC_GO_IDLE_STATE || + cmd->opcode == MMC_GO_INACTIVE_STATE || + (cmd->opcode == SD_IO_RW_DIRECT && + ((cmd->arg >> 9) & 0x1FFFF) == SDIO_CCCR_ABORT)) + cmdr |= SDMMC_CMD_STOP; + else if (cmd->opcode != MMC_SEND_STATUS && cmd->data) + cmdr |= SDMMC_CMD_PRV_DAT_WAIT; + + if (cmd->flags & MMC_RSP_PRESENT) { + /* We expect a response, so set this bit */ + cmdr |= SDMMC_CMD_RESP_EXP; + if (cmd->flags & MMC_RSP_136) + cmdr |= SDMMC_CMD_RESP_LONG; + } + + if (cmd->flags & MMC_RSP_CRC) + cmdr |= SDMMC_CMD_RESP_CRC; + + data = cmd->data; + if (data) { + cmdr |= SDMMC_CMD_DAT_EXP; + if (data->flags & MMC_DATA_STREAM) + cmdr |= SDMMC_CMD_STRM_MODE; + if (data->flags & MMC_DATA_WRITE) + cmdr |= SDMMC_CMD_DAT_WR; + } + + if (drv_data && drv_data->prepare_command) + drv_data->prepare_command(slot->host, &cmdr); + + return cmdr; +} + +static u32 dw_mci_prep_stop_abort(struct dw_mci *host, struct mmc_command *cmd) +{ + struct mmc_command *stop; + u32 cmdr; + + if (!cmd->data) + return 0; + + stop = &host->stop_abort; + cmdr = cmd->opcode; + memset(stop, 0, sizeof(struct mmc_command)); + + if (cmdr == MMC_READ_SINGLE_BLOCK || + cmdr == MMC_READ_MULTIPLE_BLOCK || + cmdr == MMC_WRITE_BLOCK || + cmdr == MMC_WRITE_MULTIPLE_BLOCK) { + stop->opcode = MMC_STOP_TRANSMISSION; + stop->arg = 0; + stop->flags = MMC_RSP_R1B | MMC_CMD_AC; + } else if (cmdr == SD_IO_RW_EXTENDED) { + stop->opcode = SD_IO_RW_DIRECT; + stop->arg |= (1 << 31) | (0 << 28) | (SDIO_CCCR_ABORT << 9) | + ((cmd->arg >> 28) & 0x7); + stop->flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_AC; + } else { + return 0; + } + + cmdr = stop->opcode | SDMMC_CMD_STOP | + SDMMC_CMD_RESP_CRC | SDMMC_CMD_RESP_EXP; + + return cmdr; +} + +static void dw_mci_start_command(struct dw_mci *host, + struct mmc_command *cmd, u32 cmd_flags) +{ + host->cmd = cmd; + dev_vdbg(host->dev, + "start command: ARGR=0x%08x CMDR=0x%08x\n", + cmd->arg, cmd_flags); + + mci_writel(host, CMDARG, cmd->arg); + wmb(); + + mci_writel(host, CMD, cmd_flags | SDMMC_CMD_START); +} + +static inline void send_stop_abort(struct dw_mci *host, struct mmc_data *data) +{ + struct mmc_command *stop = data->stop ? data->stop : &host->stop_abort; + dw_mci_start_command(host, stop, host->stop_cmdr); +} + +/* DMA interface functions */ +static void dw_mci_stop_dma(struct dw_mci *host) +{ + if (host->using_dma) { + host->dma_ops->stop(host); + host->dma_ops->cleanup(host); + } + + /* Data transfer was stopped by the interrupt handler */ + set_bit(EVENT_XFER_COMPLETE, &host->pending_events); +} + +static int dw_mci_get_dma_dir(struct mmc_data *data) +{ + if (data->flags & MMC_DATA_WRITE) + return DMA_TO_DEVICE; + else + return DMA_FROM_DEVICE; +} + +#ifdef CONFIG_MMC_DW_IDMAC +static void dw_mci_dma_cleanup(struct dw_mci *host) +{ + struct mmc_data *data = host->data; + + if (data) + if (!data->host_cookie) + dma_unmap_sg(host->dev, + data->sg, + data->sg_len, + dw_mci_get_dma_dir(data)); +} + +static void dw_mci_idmac_reset(struct dw_mci *host) +{ + u32 bmod = mci_readl(host, BMOD); + /* Software reset of DMA */ + bmod |= SDMMC_IDMAC_SWRESET; + mci_writel(host, BMOD, bmod); +} + +static void dw_mci_idmac_stop_dma(struct dw_mci *host) +{ + u32 temp; + + /* Disable and reset the IDMAC interface */ + temp = mci_readl(host, CTRL); + temp &= ~SDMMC_CTRL_USE_IDMAC; + temp |= SDMMC_CTRL_DMA_RESET; + mci_writel(host, CTRL, temp); + + /* Stop the IDMAC running */ + temp = mci_readl(host, BMOD); + temp &= ~(SDMMC_IDMAC_ENABLE | SDMMC_IDMAC_FB); + temp |= SDMMC_IDMAC_SWRESET; + mci_writel(host, BMOD, temp); +} + +static void dw_mci_idmac_complete_dma(struct dw_mci *host) +{ + struct mmc_data *data = host->data; + + dev_vdbg(host->dev, "DMA complete\n"); + + host->dma_ops->cleanup(host); + + /* + * If the card was removed, data will be NULL. No point in trying to + * send the stop command or waiting for NBUSY in this case. + */ + if (data) { + set_bit(EVENT_XFER_COMPLETE, &host->pending_events); + tasklet_schedule(&host->tasklet); + } +} + +static void dw_mci_translate_sglist(struct dw_mci *host, struct mmc_data *data, + unsigned int sg_len) +{ + int i; + struct idmac_desc *desc = host->sg_cpu; + + for (i = 0; i < sg_len; i++, desc++) { + unsigned int length = sg_dma_len(&data->sg[i]); + u32 mem_addr = sg_dma_address(&data->sg[i]); + + /* Set the OWN bit and disable interrupts for this descriptor */ + desc->des0 = IDMAC_DES0_OWN | IDMAC_DES0_DIC | IDMAC_DES0_CH; + + /* Buffer length */ + IDMAC_SET_BUFFER1_SIZE(desc, length); + + /* Physical address to DMA to/from */ + desc->des2 = mem_addr; + } + + /* Set first descriptor */ + desc = host->sg_cpu; + desc->des0 |= IDMAC_DES0_FD; + + /* Set last descriptor */ + desc = host->sg_cpu + (i - 1) * sizeof(struct idmac_desc); + desc->des0 &= ~(IDMAC_DES0_CH | IDMAC_DES0_DIC); + desc->des0 |= IDMAC_DES0_LD; + + wmb(); +} + +static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len) +{ + u32 temp; + + dw_mci_translate_sglist(host, host->data, sg_len); + + /* Select IDMAC interface */ + temp = mci_readl(host, CTRL); + temp |= SDMMC_CTRL_USE_IDMAC; + mci_writel(host, CTRL, temp); + + wmb(); + + /* Enable the IDMAC */ + temp = mci_readl(host, BMOD); + temp |= SDMMC_IDMAC_ENABLE | SDMMC_IDMAC_FB; + mci_writel(host, BMOD, temp); + + /* Start it running */ + mci_writel(host, PLDMND, 1); +} + +static int dw_mci_idmac_init(struct dw_mci *host) +{ + struct idmac_desc *p; + int i; + + /* Number of descriptors in the ring buffer */ + host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc); + + /* Forward link the descriptor list */ + for (i = 0, p = host->sg_cpu; i < host->ring_size - 1; i++, p++) + p->des3 = host->sg_dma + (sizeof(struct idmac_desc) * (i + 1)); + + /* Set the last descriptor as the end-of-ring descriptor */ + p->des3 = host->sg_dma; + p->des0 = IDMAC_DES0_ER; + + dw_mci_idmac_reset(host); + + /* Mask out interrupts - get Tx & Rx complete only */ + mci_writel(host, IDSTS, IDMAC_INT_CLR); + mci_writel(host, IDINTEN, SDMMC_IDMAC_INT_NI | SDMMC_IDMAC_INT_RI | + SDMMC_IDMAC_INT_TI); + + /* Set the descriptor base address */ + mci_writel(host, DBADDR, host->sg_dma); + return 0; +} + +static const struct dw_mci_dma_ops dw_mci_idmac_ops = { + .init = dw_mci_idmac_init, + .start = dw_mci_idmac_start_dma, + .stop = dw_mci_idmac_stop_dma, + .complete = dw_mci_idmac_complete_dma, + .cleanup = dw_mci_dma_cleanup, +}; +#endif /* CONFIG_MMC_DW_IDMAC */ + +static int dw_mci_pre_dma_transfer(struct dw_mci *host, + struct mmc_data *data, + bool next) +{ + struct scatterlist *sg; + unsigned int i, sg_len; + + if (!next && data->host_cookie) + return data->host_cookie; + + /* + * We don't do DMA on "complex" transfers, i.e. with + * non-word-aligned buffers or lengths. Also, we don't bother + * with all the DMA setup overhead for short transfers. + */ + if (data->blocks * data->blksz < DW_MCI_DMA_THRESHOLD) + return -EINVAL; + + if (data->blksz & 3) + return -EINVAL; + + for_each_sg(data->sg, sg, data->sg_len, i) { + if (sg->offset & 3 || sg->length & 3) + return -EINVAL; + } + + sg_len = dma_map_sg(host->dev, + data->sg, + data->sg_len, + dw_mci_get_dma_dir(data)); + if (sg_len == 0) + return -EINVAL; + + if (next) + data->host_cookie = sg_len; + + return sg_len; +} + +static void dw_mci_pre_req(struct mmc_host *mmc, + struct mmc_request *mrq, + bool is_first_req) +{ + struct dw_mci_slot *slot = mmc_priv(mmc); + struct mmc_data *data = mrq->data; + + if (!slot->host->use_dma || !data) + return; + + if (data->host_cookie) { + data->host_cookie = 0; + return; + } + + if (dw_mci_pre_dma_transfer(slot->host, mrq->data, 1) < 0) + data->host_cookie = 0; +} + +static void dw_mci_post_req(struct mmc_host *mmc, + struct mmc_request *mrq, + int err) +{ + struct dw_mci_slot *slot = mmc_priv(mmc); + struct mmc_data *data = mrq->data; + + if (!slot->host->use_dma || !data) + return; + + if (data->host_cookie) + dma_unmap_sg(slot->host->dev, + data->sg, + data->sg_len, + dw_mci_get_dma_dir(data)); + data->host_cookie = 0; +} + +static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data) +{ +#ifdef CONFIG_MMC_DW_IDMAC + unsigned int blksz = data->blksz; + const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256}; + u32 fifo_width = 1 << host->data_shift; + u32 blksz_depth = blksz / fifo_width, fifoth_val; + u32 msize = 0, rx_wmark = 1, tx_wmark, tx_wmark_invers; + int idx = (sizeof(mszs) / sizeof(mszs[0])) - 1; + + tx_wmark = (host->fifo_depth) / 2; + tx_wmark_invers = host->fifo_depth - tx_wmark; + + /* + * MSIZE is '1', + * if blksz is not a multiple of the FIFO width + */ + if (blksz % fifo_width) { + msize = 0; + rx_wmark = 1; + goto done; + } + + do { + if (!((blksz_depth % mszs[idx]) || + (tx_wmark_invers % mszs[idx]))) { + msize = idx; + rx_wmark = mszs[idx] - 1; + break; + } + } while (--idx > 0); + /* + * If idx is '0', it won't be tried + * Thus, initial values are uesed + */ +done: + fifoth_val = SDMMC_SET_FIFOTH(msize, rx_wmark, tx_wmark); + mci_writel(host, FIFOTH, fifoth_val); +#endif +} + +static void dw_mci_ctrl_rd_thld(struct dw_mci *host, struct mmc_data *data) +{ + unsigned int blksz = data->blksz; + u32 blksz_depth, fifo_depth; + u16 thld_size; + + WARN_ON(!(data->flags & MMC_DATA_READ)); + + if (host->timing != MMC_TIMING_MMC_HS200 && + host->timing != MMC_TIMING_UHS_SDR104) + goto disable; + + blksz_depth = blksz / (1 << host->data_shift); + fifo_depth = host->fifo_depth; + + if (blksz_depth > fifo_depth) + goto disable; + + /* + * If (blksz_depth) >= (fifo_depth >> 1), should be 'thld_size <= blksz' + * If (blksz_depth) < (fifo_depth >> 1), should be thld_size = blksz + * Currently just choose blksz. + */ + thld_size = blksz; + mci_writel(host, CDTHRCTL, SDMMC_SET_RD_THLD(thld_size, 1)); + return; + +disable: + mci_writel(host, CDTHRCTL, SDMMC_SET_RD_THLD(0, 0)); +} + +static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data) +{ + int sg_len; + u32 temp; + + host->using_dma = 0; + + /* If we don't have a channel, we can't do DMA */ + if (!host->use_dma) + return -ENODEV; + + sg_len = dw_mci_pre_dma_transfer(host, data, 0); + if (sg_len < 0) { + host->dma_ops->stop(host); + return sg_len; + } + + host->using_dma = 1; + + dev_vdbg(host->dev, + "sd sg_cpu: %#lx sg_dma: %#lx sg_len: %d\n", + (unsigned long)host->sg_cpu, (unsigned long)host->sg_dma, + sg_len); + + /* + * Decide the MSIZE and RX/TX Watermark. + * If current block size is same with previous size, + * no need to update fifoth. + */ + if (host->prev_blksz != data->blksz) + dw_mci_adjust_fifoth(host, data); + + /* Enable the DMA interface */ + temp = mci_readl(host, CTRL); + temp |= SDMMC_CTRL_DMA_ENABLE; + mci_writel(host, CTRL, temp); + + /* Disable RX/TX IRQs, let DMA handle it */ + temp = mci_readl(host, INTMASK); + temp &= ~(SDMMC_INT_RXDR | SDMMC_INT_TXDR); + mci_writel(host, INTMASK, temp); + + host->dma_ops->start(host, sg_len); + + return 0; +} + +static void dw_mci_submit_data(struct dw_mci *host, struct mmc_data *data) +{ + u32 temp; + + data->error = -EINPROGRESS; + + WARN_ON(host->data); + host->sg = NULL; + host->data = data; + + if (data->flags & MMC_DATA_READ) { + host->dir_status = DW_MCI_RECV_STATUS; + dw_mci_ctrl_rd_thld(host, data); + } else { + host->dir_status = DW_MCI_SEND_STATUS; + } + + if (dw_mci_submit_data_dma(host, data)) { + int flags = SG_MITER_ATOMIC; + if (host->data->flags & MMC_DATA_READ) + flags |= SG_MITER_TO_SG; + else + flags |= SG_MITER_FROM_SG; + + sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags); + host->sg = data->sg; + host->part_buf_start = 0; + host->part_buf_count = 0; + + mci_writel(host, RINTSTS, SDMMC_INT_TXDR | SDMMC_INT_RXDR); + temp = mci_readl(host, INTMASK); + temp |= SDMMC_INT_TXDR | SDMMC_INT_RXDR; + mci_writel(host, INTMASK, temp); + + temp = mci_readl(host, CTRL); + temp &= ~SDMMC_CTRL_DMA_ENABLE; + mci_writel(host, CTRL, temp); + + /* + * Use the initial fifoth_val for PIO mode. + * If next issued data may be transfered by DMA mode, + * prev_blksz should be invalidated. + */ + mci_writel(host, FIFOTH, host->fifoth_val); + host->prev_blksz = 0; + } else { + /* + * Keep the current block size. + * It will be used to decide whether to update + * fifoth register next time. + */ + host->prev_blksz = data->blksz; + } +} + +static void mci_send_cmd(struct dw_mci_slot *slot, u32 cmd, u32 arg) +{ + struct dw_mci *host = slot->host; + unsigned long timeout = jiffies + msecs_to_jiffies(500); + unsigned int cmd_status = 0; + + mci_writel(host, CMDARG, arg); + wmb(); + mci_writel(host, CMD, SDMMC_CMD_START | cmd); + + while (time_before(jiffies, timeout)) { + cmd_status = mci_readl(host, CMD); + if (!(cmd_status & SDMMC_CMD_START)) + return; + } + dev_err(&slot->mmc->class_dev, + "Timeout sending command (cmd %#x arg %#x status %#x)\n", + cmd, arg, cmd_status); +} + +static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit) +{ + struct dw_mci *host = slot->host; + unsigned int clock = slot->clock; + u32 div; + u32 clk_en_a; + + if (!clock) { + mci_writel(host, CLKENA, 0); + mci_send_cmd(slot, + SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0); + } else if (clock != host->current_speed || force_clkinit) { + div = host->bus_hz / clock; + if (host->bus_hz % clock && host->bus_hz > clock) + /* + * move the + 1 after the divide to prevent + * over-clocking the card. + */ + div += 1; + + div = (host->bus_hz != clock) ? DIV_ROUND_UP(div, 2) : 0; + + if ((clock << div) != slot->__clk_old || force_clkinit) + dev_info(&slot->mmc->class_dev, + "Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ div = %d)\n", + slot->id, host->bus_hz, clock, + div ? ((host->bus_hz / div) >> 1) : + host->bus_hz, div); + + /* disable clock */ + mci_writel(host, CLKENA, 0); + mci_writel(host, CLKSRC, 0); + + /* inform CIU */ + mci_send_cmd(slot, + SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0); + + /* set clock to desired speed */ + mci_writel(host, CLKDIV, div); + + /* inform CIU */ + mci_send_cmd(slot, + SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0); + + /* enable clock; only low power if no SDIO */ + clk_en_a = SDMMC_CLKEN_ENABLE << slot->id; + if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->id))) + clk_en_a |= SDMMC_CLKEN_LOW_PWR << slot->id; + mci_writel(host, CLKENA, clk_en_a); + + /* inform CIU */ + mci_send_cmd(slot, + SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0); + + /* keep the clock with reflecting clock dividor */ + slot->__clk_old = clock << div; + } + + host->current_speed = clock; + + /* Set the current slot bus width */ + mci_writel(host, CTYPE, (slot->ctype << slot->id)); +} + +static void __dw_mci_start_request(struct dw_mci *host, + struct dw_mci_slot *slot, + struct mmc_command *cmd) +{ + struct mmc_request *mrq; + struct mmc_data *data; + u32 cmdflags; + + mrq = slot->mrq; + + host->cur_slot = slot; + host->mrq = mrq; + + host->pending_events = 0; + host->completed_events = 0; + host->cmd_status = 0; + host->data_status = 0; + host->dir_status = 0; + + data = cmd->data; + if (data) { + mci_writel(host, TMOUT, 0xFFFFFFFF); + mci_writel(host, BYTCNT, data->blksz*data->blocks); + mci_writel(host, BLKSIZ, data->blksz); + } + + cmdflags = dw_mci_prepare_command(slot->mmc, cmd); + + /* this is the first command, send the initialization clock */ + if (test_and_clear_bit(DW_MMC_CARD_NEED_INIT, &slot->flags)) + cmdflags |= SDMMC_CMD_INIT; + + if (data) { + dw_mci_submit_data(host, data); + wmb(); + } + + dw_mci_start_command(host, cmd, cmdflags); + + if (mrq->stop) + host->stop_cmdr = dw_mci_prepare_command(slot->mmc, mrq->stop); + else + host->stop_cmdr = dw_mci_prep_stop_abort(host, cmd); +} + +static void dw_mci_start_request(struct dw_mci *host, + struct dw_mci_slot *slot) +{ + struct mmc_request *mrq = slot->mrq; + struct mmc_command *cmd; + + cmd = mrq->sbc ? mrq->sbc : mrq->cmd; + __dw_mci_start_request(host, slot, cmd); +} + +/* must be called with host->lock held */ +static void dw_mci_queue_request(struct dw_mci *host, struct dw_mci_slot *slot, + struct mmc_request *mrq) +{ + dev_vdbg(&slot->mmc->class_dev, "queue request: state=%d\n", + host->state); + + slot->mrq = mrq; + + if (host->state == STATE_IDLE) { + host->state = STATE_SENDING_CMD; + dw_mci_start_request(host, slot); + } else { + list_add_tail(&slot->queue_node, &host->queue); + } +} + +static void dw_mci_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct dw_mci_slot *slot = mmc_priv(mmc); + struct dw_mci *host = slot->host; + + WARN_ON(slot->mrq); + + /* + * The check for card presence and queueing of the request must be + * atomic, otherwise the card could be removed in between and the + * request wouldn't fail until another card was inserted. + */ + spin_lock_bh(&host->lock); + + if (!test_bit(DW_MMC_CARD_PRESENT, &slot->flags)) { + spin_unlock_bh(&host->lock); + mrq->cmd->error = -ENOMEDIUM; + mmc_request_done(mmc, mrq); + return; + } + + dw_mci_queue_request(host, slot, mrq); + + spin_unlock_bh(&host->lock); +} + +static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct dw_mci_slot *slot = mmc_priv(mmc); + const struct dw_mci_drv_data *drv_data = slot->host->drv_data; + u32 regs; + + switch (ios->bus_width) { + case MMC_BUS_WIDTH_4: + slot->ctype = SDMMC_CTYPE_4BIT; + break; + case MMC_BUS_WIDTH_8: + slot->ctype = SDMMC_CTYPE_8BIT; + break; + default: + /* set default 1 bit mode */ + slot->ctype = SDMMC_CTYPE_1BIT; + } + + regs = mci_readl(slot->host, UHS_REG); + + /* DDR mode set */ + if (ios->timing == MMC_TIMING_MMC_DDR52) + regs |= ((0x1 << slot->id) << 16); + else + regs &= ~((0x1 << slot->id) << 16); + + mci_writel(slot->host, UHS_REG, regs); + slot->host->timing = ios->timing; + + /* + * Use mirror of ios->clock to prevent race with mmc + * core ios update when finding the minimum. + */ + slot->clock = ios->clock; + + if (drv_data && drv_data->set_ios) + drv_data->set_ios(slot->host, ios); + + /* Slot specific timing and width adjustment */ + dw_mci_setup_bus(slot, false); + + switch (ios->power_mode) { + case MMC_POWER_UP: + set_bit(DW_MMC_CARD_NEED_INIT, &slot->flags); + regs = mci_readl(slot->host, PWREN); + regs |= (1 << slot->id); + mci_writel(slot->host, PWREN, regs); + break; + case MMC_POWER_OFF: + regs = mci_readl(slot->host, PWREN); + regs &= ~(1 << slot->id); + mci_writel(slot->host, PWREN, regs); + break; + default: + break; + } +} + +static int dw_mci_get_ro(struct mmc_host *mmc) +{ + int read_only; + struct dw_mci_slot *slot = mmc_priv(mmc); + int gpio_ro = mmc_gpio_get_ro(mmc); + + /* Use platform get_ro function, else try on board write protect */ + if (slot->quirks & DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT) + read_only = 0; + else if (!IS_ERR_VALUE(gpio_ro)) + read_only = gpio_ro; + else + read_only = + mci_readl(slot->host, WRTPRT) & (1 << slot->id) ? 1 : 0; + + dev_dbg(&mmc->class_dev, "card is %s\n", + read_only ? "read-only" : "read-write"); + + return read_only; +} + +static int dw_mci_get_cd(struct mmc_host *mmc) +{ + int present; + struct dw_mci_slot *slot = mmc_priv(mmc); + struct dw_mci_board *brd = slot->host->pdata; + struct dw_mci *host = slot->host; + int gpio_cd = mmc_gpio_get_cd(mmc); + + /* Use platform get_cd function, else try onboard card detect */ + if (brd->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION) + present = 1; + else if (!IS_ERR_VALUE(gpio_cd)) + present = gpio_cd; + else + present = (mci_readl(slot->host, CDETECT) & (1 << slot->id)) + == 0 ? 1 : 0; + + spin_lock_bh(&host->lock); + if (present) { + set_bit(DW_MMC_CARD_PRESENT, &slot->flags); + dev_dbg(&mmc->class_dev, "card is present\n"); + } else { + clear_bit(DW_MMC_CARD_PRESENT, &slot->flags); + dev_dbg(&mmc->class_dev, "card is not present\n"); + } + spin_unlock_bh(&host->lock); + + return present; +} + +/* + * Disable lower power mode. + * + * Low power mode will stop the card clock when idle. According to the + * description of the CLKENA register we should disable low power mode + * for SDIO cards if we need SDIO interrupts to work. + * + * This function is fast if low power mode is already disabled. + */ +static void dw_mci_disable_low_power(struct dw_mci_slot *slot) +{ + struct dw_mci *host = slot->host; + u32 clk_en_a; + const u32 clken_low_pwr = SDMMC_CLKEN_LOW_PWR << slot->id; + + clk_en_a = mci_readl(host, CLKENA); + + if (clk_en_a & clken_low_pwr) { + mci_writel(host, CLKENA, clk_en_a & ~clken_low_pwr); + mci_send_cmd(slot, SDMMC_CMD_UPD_CLK | + SDMMC_CMD_PRV_DAT_WAIT, 0); + } +} + +static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb) +{ + struct dw_mci_slot *slot = mmc_priv(mmc); + struct dw_mci *host = slot->host; + u32 int_mask; + + /* Enable/disable Slot Specific SDIO interrupt */ + int_mask = mci_readl(host, INTMASK); + if (enb) { + /* + * Turn off low power mode if it was enabled. This is a bit of + * a heavy operation and we disable / enable IRQs a lot, so + * we'll leave low power mode disabled and it will get + * re-enabled again in dw_mci_setup_bus(). + */ + dw_mci_disable_low_power(slot); + + mci_writel(host, INTMASK, + (int_mask | SDMMC_INT_SDIO(slot->id))); + } else { + mci_writel(host, INTMASK, + (int_mask & ~SDMMC_INT_SDIO(slot->id))); + } +} + +static int dw_mci_execute_tuning(struct mmc_host *mmc, u32 opcode) +{ + struct dw_mci_slot *slot = mmc_priv(mmc); + struct dw_mci *host = slot->host; + const struct dw_mci_drv_data *drv_data = host->drv_data; + struct dw_mci_tuning_data tuning_data; + int err = -ENOSYS; + + if (opcode == MMC_SEND_TUNING_BLOCK_HS200) { + if (mmc->ios.bus_width == MMC_BUS_WIDTH_8) { + tuning_data.blk_pattern = tuning_blk_pattern_8bit; + tuning_data.blksz = sizeof(tuning_blk_pattern_8bit); + } else if (mmc->ios.bus_width == MMC_BUS_WIDTH_4) { + tuning_data.blk_pattern = tuning_blk_pattern_4bit; + tuning_data.blksz = sizeof(tuning_blk_pattern_4bit); + } else { + return -EINVAL; + } + } else if (opcode == MMC_SEND_TUNING_BLOCK) { + tuning_data.blk_pattern = tuning_blk_pattern_4bit; + tuning_data.blksz = sizeof(tuning_blk_pattern_4bit); + } else { + dev_err(host->dev, + "Undefined command(%d) for tuning\n", opcode); + return -EINVAL; + } + + if (drv_data && drv_data->execute_tuning) + err = drv_data->execute_tuning(slot, opcode, &tuning_data); + return err; +} + +static const struct mmc_host_ops dw_mci_ops = { + .request = dw_mci_request, + .pre_req = dw_mci_pre_req, + .post_req = dw_mci_post_req, + .set_ios = dw_mci_set_ios, + .get_ro = dw_mci_get_ro, + .get_cd = dw_mci_get_cd, + .enable_sdio_irq = dw_mci_enable_sdio_irq, + .execute_tuning = dw_mci_execute_tuning, +}; + +static void dw_mci_request_end(struct dw_mci *host, struct mmc_request *mrq) + __releases(&host->lock) + __acquires(&host->lock) +{ + struct dw_mci_slot *slot; + struct mmc_host *prev_mmc = host->cur_slot->mmc; + + WARN_ON(host->cmd || host->data); + + host->cur_slot->mrq = NULL; + host->mrq = NULL; + if (!list_empty(&host->queue)) { + slot = list_entry(host->queue.next, + struct dw_mci_slot, queue_node); + list_del(&slot->queue_node); + dev_vdbg(host->dev, "list not empty: %s is next\n", + mmc_hostname(slot->mmc)); + host->state = STATE_SENDING_CMD; + dw_mci_start_request(host, slot); + } else { + dev_vdbg(host->dev, "list empty\n"); + host->state = STATE_IDLE; + } + + spin_unlock(&host->lock); + mmc_request_done(prev_mmc, mrq); + spin_lock(&host->lock); +} + +static int dw_mci_command_complete(struct dw_mci *host, struct mmc_command *cmd) +{ + u32 status = host->cmd_status; + + host->cmd_status = 0; + + /* Read the response from the card (up to 16 bytes) */ + if (cmd->flags & MMC_RSP_PRESENT) { + if (cmd->flags & MMC_RSP_136) { + cmd->resp[3] = mci_readl(host, RESP0); + cmd->resp[2] = mci_readl(host, RESP1); + cmd->resp[1] = mci_readl(host, RESP2); + cmd->resp[0] = mci_readl(host, RESP3); + } else { + cmd->resp[0] = mci_readl(host, RESP0); + cmd->resp[1] = 0; + cmd->resp[2] = 0; + cmd->resp[3] = 0; + } + } + + if (status & SDMMC_INT_RTO) + cmd->error = -ETIMEDOUT; + else if ((cmd->flags & MMC_RSP_CRC) && (status & SDMMC_INT_RCRC)) + cmd->error = -EILSEQ; + else if (status & SDMMC_INT_RESP_ERR) + cmd->error = -EIO; + else + cmd->error = 0; + + if (cmd->error) { + /* newer ip versions need a delay between retries */ + if (host->quirks & DW_MCI_QUIRK_RETRY_DELAY) + mdelay(20); + } + + return cmd->error; +} + +static int dw_mci_data_complete(struct dw_mci *host, struct mmc_data *data) +{ + u32 status = host->data_status; + + if (status & DW_MCI_DATA_ERROR_FLAGS) { + if (status & SDMMC_INT_DRTO) { + data->error = -ETIMEDOUT; + } else if (status & SDMMC_INT_DCRC) { + data->error = -EILSEQ; + } else if (status & SDMMC_INT_EBE) { + if (host->dir_status == + DW_MCI_SEND_STATUS) { + /* + * No data CRC status was returned. + * The number of bytes transferred + * will be exaggerated in PIO mode. + */ + data->bytes_xfered = 0; + data->error = -ETIMEDOUT; + } else if (host->dir_status == + DW_MCI_RECV_STATUS) { + data->error = -EIO; + } + } else { + /* SDMMC_INT_SBE is included */ + data->error = -EIO; + } + + dev_dbg(host->dev, "data error, status 0x%08x\n", status); + + /* + * After an error, there may be data lingering + * in the FIFO + */ + dw_mci_fifo_reset(host); + } else { + data->bytes_xfered = data->blocks * data->blksz; + data->error = 0; + } + + return data->error; +} + +static void dw_mci_tasklet_func(unsigned long priv) +{ + struct dw_mci *host = (struct dw_mci *)priv; + struct mmc_data *data; + struct mmc_command *cmd; + struct mmc_request *mrq; + enum dw_mci_state state; + enum dw_mci_state prev_state; + unsigned int err; + + spin_lock(&host->lock); + + state = host->state; + data = host->data; + mrq = host->mrq; + + do { + prev_state = state; + + switch (state) { + case STATE_IDLE: + break; + + case STATE_SENDING_CMD: + if (!test_and_clear_bit(EVENT_CMD_COMPLETE, + &host->pending_events)) + break; + + cmd = host->cmd; + host->cmd = NULL; + set_bit(EVENT_CMD_COMPLETE, &host->completed_events); + err = dw_mci_command_complete(host, cmd); + if (cmd == mrq->sbc && !err) { + prev_state = state = STATE_SENDING_CMD; + __dw_mci_start_request(host, host->cur_slot, + mrq->cmd); + goto unlock; + } + + if (cmd->data && err) { + dw_mci_stop_dma(host); + send_stop_abort(host, data); + state = STATE_SENDING_STOP; + break; + } + + if (!cmd->data || err) { + dw_mci_request_end(host, mrq); + goto unlock; + } + + prev_state = state = STATE_SENDING_DATA; + /* fall through */ + + case STATE_SENDING_DATA: + if (test_and_clear_bit(EVENT_DATA_ERROR, + &host->pending_events)) { + dw_mci_stop_dma(host); + send_stop_abort(host, data); + state = STATE_DATA_ERROR; + break; + } + + if (!test_and_clear_bit(EVENT_XFER_COMPLETE, + &host->pending_events)) + break; + + set_bit(EVENT_XFER_COMPLETE, &host->completed_events); + prev_state = state = STATE_DATA_BUSY; + /* fall through */ + + case STATE_DATA_BUSY: + if (!test_and_clear_bit(EVENT_DATA_COMPLETE, + &host->pending_events)) + break; + + host->data = NULL; + set_bit(EVENT_DATA_COMPLETE, &host->completed_events); + err = dw_mci_data_complete(host, data); + + if (!err) { + if (!data->stop || mrq->sbc) { + if (mrq->sbc && data->stop) + data->stop->error = 0; + dw_mci_request_end(host, mrq); + goto unlock; + } + + /* stop command for open-ended transfer*/ + if (data->stop) + send_stop_abort(host, data); + } + + /* + * If err has non-zero, + * stop-abort command has been already issued. + */ + prev_state = state = STATE_SENDING_STOP; + + /* fall through */ + + case STATE_SENDING_STOP: + if (!test_and_clear_bit(EVENT_CMD_COMPLETE, + &host->pending_events)) + break; + + /* CMD error in data command */ + if (mrq->cmd->error && mrq->data) + dw_mci_fifo_reset(host); + + host->cmd = NULL; + host->data = NULL; + + if (mrq->stop) + dw_mci_command_complete(host, mrq->stop); + else + host->cmd_status = 0; + + dw_mci_request_end(host, mrq); + goto unlock; + + case STATE_DATA_ERROR: + if (!test_and_clear_bit(EVENT_XFER_COMPLETE, + &host->pending_events)) + break; + + state = STATE_DATA_BUSY; + break; + } + } while (state != prev_state); + + host->state = state; +unlock: + spin_unlock(&host->lock); + +} + +/* push final bytes to part_buf, only use during push */ +static void dw_mci_set_part_bytes(struct dw_mci *host, void *buf, int cnt) +{ + memcpy((void *)&host->part_buf, buf, cnt); + host->part_buf_count = cnt; +} + +/* append bytes to part_buf, only use during push */ +static int dw_mci_push_part_bytes(struct dw_mci *host, void *buf, int cnt) +{ + cnt = min(cnt, (1 << host->data_shift) - host->part_buf_count); + memcpy((void *)&host->part_buf + host->part_buf_count, buf, cnt); + host->part_buf_count += cnt; + return cnt; +} + +/* pull first bytes from part_buf, only use during pull */ +static int dw_mci_pull_part_bytes(struct dw_mci *host, void *buf, int cnt) +{ + cnt = min(cnt, (int)host->part_buf_count); + if (cnt) { + memcpy(buf, (void *)&host->part_buf + host->part_buf_start, + cnt); + host->part_buf_count -= cnt; + host->part_buf_start += cnt; + } + return cnt; +} + +/* pull final bytes from the part_buf, assuming it's just been filled */ +static void dw_mci_pull_final_bytes(struct dw_mci *host, void *buf, int cnt) +{ + memcpy(buf, &host->part_buf, cnt); + host->part_buf_start = cnt; + host->part_buf_count = (1 << host->data_shift) - cnt; +} + +static void dw_mci_push_data16(struct dw_mci *host, void *buf, int cnt) +{ + struct mmc_data *data = host->data; + int init_cnt = cnt; + + /* try and push anything in the part_buf */ + if (unlikely(host->part_buf_count)) { + int len = dw_mci_push_part_bytes(host, buf, cnt); + buf += len; + cnt -= len; + if (host->part_buf_count == 2) { + mci_writew(host, DATA(host->data_offset), + host->part_buf16); + host->part_buf_count = 0; + } + } +#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS + if (unlikely((unsigned long)buf & 0x1)) { + while (cnt >= 2) { + u16 aligned_buf[64]; + int len = min(cnt & -2, (int)sizeof(aligned_buf)); + int items = len >> 1; + int i; + /* memcpy from input buffer into aligned buffer */ + memcpy(aligned_buf, buf, len); + buf += len; + cnt -= len; + /* push data from aligned buffer into fifo */ + for (i = 0; i < items; ++i) + mci_writew(host, DATA(host->data_offset), + aligned_buf[i]); + } + } else +#endif + { + u16 *pdata = buf; + for (; cnt >= 2; cnt -= 2) + mci_writew(host, DATA(host->data_offset), *pdata++); + buf = pdata; + } + /* put anything remaining in the part_buf */ + if (cnt) { + dw_mci_set_part_bytes(host, buf, cnt); + /* Push data if we have reached the expected data length */ + if ((data->bytes_xfered + init_cnt) == + (data->blksz * data->blocks)) + mci_writew(host, DATA(host->data_offset), + host->part_buf16); + } +} + +static void dw_mci_pull_data16(struct dw_mci *host, void *buf, int cnt) +{ +#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS + if (unlikely((unsigned long)buf & 0x1)) { + while (cnt >= 2) { + /* pull data from fifo into aligned buffer */ + u16 aligned_buf[64]; + int len = min(cnt & -2, (int)sizeof(aligned_buf)); + int items = len >> 1; + int i; + for (i = 0; i < items; ++i) + aligned_buf[i] = mci_readw(host, + DATA(host->data_offset)); + /* memcpy from aligned buffer into output buffer */ + memcpy(buf, aligned_buf, len); + buf += len; + cnt -= len; + } + } else +#endif + { + u16 *pdata = buf; + for (; cnt >= 2; cnt -= 2) + *pdata++ = mci_readw(host, DATA(host->data_offset)); + buf = pdata; + } + if (cnt) { + host->part_buf16 = mci_readw(host, DATA(host->data_offset)); + dw_mci_pull_final_bytes(host, buf, cnt); + } +} + +static void dw_mci_push_data32(struct dw_mci *host, void *buf, int cnt) +{ + struct mmc_data *data = host->data; + int init_cnt = cnt; + + /* try and push anything in the part_buf */ + if (unlikely(host->part_buf_count)) { + int len = dw_mci_push_part_bytes(host, buf, cnt); + buf += len; + cnt -= len; + if (host->part_buf_count == 4) { + mci_writel(host, DATA(host->data_offset), + host->part_buf32); + host->part_buf_count = 0; + } + } +#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS + if (unlikely((unsigned long)buf & 0x3)) { + while (cnt >= 4) { + u32 aligned_buf[32]; + int len = min(cnt & -4, (int)sizeof(aligned_buf)); + int items = len >> 2; + int i; + /* memcpy from input buffer into aligned buffer */ + memcpy(aligned_buf, buf, len); + buf += len; + cnt -= len; + /* push data from aligned buffer into fifo */ + for (i = 0; i < items; ++i) + mci_writel(host, DATA(host->data_offset), + aligned_buf[i]); + } + } else +#endif + { + u32 *pdata = buf; + for (; cnt >= 4; cnt -= 4) + mci_writel(host, DATA(host->data_offset), *pdata++); + buf = pdata; + } + /* put anything remaining in the part_buf */ + if (cnt) { + dw_mci_set_part_bytes(host, buf, cnt); + /* Push data if we have reached the expected data length */ + if ((data->bytes_xfered + init_cnt) == + (data->blksz * data->blocks)) + mci_writel(host, DATA(host->data_offset), + host->part_buf32); + } +} + +static void dw_mci_pull_data32(struct dw_mci *host, void *buf, int cnt) +{ +#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS + if (unlikely((unsigned long)buf & 0x3)) { + while (cnt >= 4) { + /* pull data from fifo into aligned buffer */ + u32 aligned_buf[32]; + int len = min(cnt & -4, (int)sizeof(aligned_buf)); + int items = len >> 2; + int i; + for (i = 0; i < items; ++i) + aligned_buf[i] = mci_readl(host, + DATA(host->data_offset)); + /* memcpy from aligned buffer into output buffer */ + memcpy(buf, aligned_buf, len); + buf += len; + cnt -= len; + } + } else +#endif + { + u32 *pdata = buf; + for (; cnt >= 4; cnt -= 4) + *pdata++ = mci_readl(host, DATA(host->data_offset)); + buf = pdata; + } + if (cnt) { + host->part_buf32 = mci_readl(host, DATA(host->data_offset)); + dw_mci_pull_final_bytes(host, buf, cnt); + } +} + +static void dw_mci_push_data64(struct dw_mci *host, void *buf, int cnt) +{ + struct mmc_data *data = host->data; + int init_cnt = cnt; + + /* try and push anything in the part_buf */ + if (unlikely(host->part_buf_count)) { + int len = dw_mci_push_part_bytes(host, buf, cnt); + buf += len; + cnt -= len; + + if (host->part_buf_count == 8) { + mci_writeq(host, DATA(host->data_offset), + host->part_buf); + host->part_buf_count = 0; + } + } +#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS + if (unlikely((unsigned long)buf & 0x7)) { + while (cnt >= 8) { + u64 aligned_buf[16]; + int len = min(cnt & -8, (int)sizeof(aligned_buf)); + int items = len >> 3; + int i; + /* memcpy from input buffer into aligned buffer */ + memcpy(aligned_buf, buf, len); + buf += len; + cnt -= len; + /* push data from aligned buffer into fifo */ + for (i = 0; i < items; ++i) + mci_writeq(host, DATA(host->data_offset), + aligned_buf[i]); + } + } else +#endif + { + u64 *pdata = buf; + for (; cnt >= 8; cnt -= 8) + mci_writeq(host, DATA(host->data_offset), *pdata++); + buf = pdata; + } + /* put anything remaining in the part_buf */ + if (cnt) { + dw_mci_set_part_bytes(host, buf, cnt); + /* Push data if we have reached the expected data length */ + if ((data->bytes_xfered + init_cnt) == + (data->blksz * data->blocks)) + mci_writeq(host, DATA(host->data_offset), + host->part_buf); + } +} + +static void dw_mci_pull_data64(struct dw_mci *host, void *buf, int cnt) +{ +#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS + if (unlikely((unsigned long)buf & 0x7)) { + while (cnt >= 8) { + /* pull data from fifo into aligned buffer */ + u64 aligned_buf[16]; + int len = min(cnt & -8, (int)sizeof(aligned_buf)); + int items = len >> 3; + int i; + for (i = 0; i < items; ++i) + aligned_buf[i] = mci_readq(host, + DATA(host->data_offset)); + /* memcpy from aligned buffer into output buffer */ + memcpy(buf, aligned_buf, len); + buf += len; + cnt -= len; + } + } else +#endif + { + u64 *pdata = buf; + for (; cnt >= 8; cnt -= 8) + *pdata++ = mci_readq(host, DATA(host->data_offset)); + buf = pdata; + } + if (cnt) { + host->part_buf = mci_readq(host, DATA(host->data_offset)); + dw_mci_pull_final_bytes(host, buf, cnt); + } +} + +static void dw_mci_pull_data(struct dw_mci *host, void *buf, int cnt) +{ + int len; + + /* get remaining partial bytes */ + len = dw_mci_pull_part_bytes(host, buf, cnt); + if (unlikely(len == cnt)) + return; + buf += len; + cnt -= len; + + /* get the rest of the data */ + host->pull_data(host, buf, cnt); +} + +static void dw_mci_read_data_pio(struct dw_mci *host, bool dto) +{ + struct sg_mapping_iter *sg_miter = &host->sg_miter; + void *buf; + unsigned int offset; + struct mmc_data *data = host->data; + int shift = host->data_shift; + u32 status; + unsigned int len; + unsigned int remain, fcnt; + + do { + if (!sg_miter_next(sg_miter)) + goto done; + + host->sg = sg_miter->piter.sg; + buf = sg_miter->addr; + remain = sg_miter->length; + offset = 0; + + do { + fcnt = (SDMMC_GET_FCNT(mci_readl(host, STATUS)) + << shift) + host->part_buf_count; + len = min(remain, fcnt); + if (!len) + break; + dw_mci_pull_data(host, (void *)(buf + offset), len); + data->bytes_xfered += len; + offset += len; + remain -= len; + } while (remain); + + sg_miter->consumed = offset; + status = mci_readl(host, MINTSTS); + mci_writel(host, RINTSTS, SDMMC_INT_RXDR); + /* if the RXDR is ready read again */ + } while ((status & SDMMC_INT_RXDR) || + (dto && SDMMC_GET_FCNT(mci_readl(host, STATUS)))); + + if (!remain) { + if (!sg_miter_next(sg_miter)) + goto done; + sg_miter->consumed = 0; + } + sg_miter_stop(sg_miter); + return; + +done: + sg_miter_stop(sg_miter); + host->sg = NULL; + smp_wmb(); + set_bit(EVENT_XFER_COMPLETE, &host->pending_events); +} + +static void dw_mci_write_data_pio(struct dw_mci *host) +{ + struct sg_mapping_iter *sg_miter = &host->sg_miter; + void *buf; + unsigned int offset; + struct mmc_data *data = host->data; + int shift = host->data_shift; + u32 status; + unsigned int len; + unsigned int fifo_depth = host->fifo_depth; + unsigned int remain, fcnt; + + do { + if (!sg_miter_next(sg_miter)) + goto done; + + host->sg = sg_miter->piter.sg; + buf = sg_miter->addr; + remain = sg_miter->length; + offset = 0; + + do { + fcnt = ((fifo_depth - + SDMMC_GET_FCNT(mci_readl(host, STATUS))) + << shift) - host->part_buf_count; + len = min(remain, fcnt); + if (!len) + break; + host->push_data(host, (void *)(buf + offset), len); + data->bytes_xfered += len; + offset += len; + remain -= len; + } while (remain); + + sg_miter->consumed = offset; + status = mci_readl(host, MINTSTS); + mci_writel(host, RINTSTS, SDMMC_INT_TXDR); + } while (status & SDMMC_INT_TXDR); /* if TXDR write again */ + + if (!remain) { + if (!sg_miter_next(sg_miter)) + goto done; + sg_miter->consumed = 0; + } + sg_miter_stop(sg_miter); + return; + +done: + sg_miter_stop(sg_miter); + host->sg = NULL; + smp_wmb(); + set_bit(EVENT_XFER_COMPLETE, &host->pending_events); +} + +static void dw_mci_cmd_interrupt(struct dw_mci *host, u32 status) +{ + if (!host->cmd_status) + host->cmd_status = status; + + smp_wmb(); + + set_bit(EVENT_CMD_COMPLETE, &host->pending_events); + tasklet_schedule(&host->tasklet); +} + +static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) +{ + struct dw_mci *host = dev_id; + u32 pending; + int i; + + pending = mci_readl(host, MINTSTS); /* read-only mask reg */ + + /* + * DTO fix - version 2.10a and below, and only if internal DMA + * is configured. + */ + if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO) { + if (!pending && + ((mci_readl(host, STATUS) >> 17) & 0x1fff)) + pending |= SDMMC_INT_DATA_OVER; + } + + if (pending) { + if (pending & DW_MCI_CMD_ERROR_FLAGS) { + mci_writel(host, RINTSTS, DW_MCI_CMD_ERROR_FLAGS); + host->cmd_status = pending; + smp_wmb(); + set_bit(EVENT_CMD_COMPLETE, &host->pending_events); + } + + if (pending & DW_MCI_DATA_ERROR_FLAGS) { + /* if there is an error report DATA_ERROR */ + mci_writel(host, RINTSTS, DW_MCI_DATA_ERROR_FLAGS); + host->data_status = pending; + smp_wmb(); + set_bit(EVENT_DATA_ERROR, &host->pending_events); + tasklet_schedule(&host->tasklet); + } + + if (pending & SDMMC_INT_DATA_OVER) { + mci_writel(host, RINTSTS, SDMMC_INT_DATA_OVER); + if (!host->data_status) + host->data_status = pending; + smp_wmb(); + if (host->dir_status == DW_MCI_RECV_STATUS) { + if (host->sg != NULL) + dw_mci_read_data_pio(host, true); + } + set_bit(EVENT_DATA_COMPLETE, &host->pending_events); + tasklet_schedule(&host->tasklet); + } + + if (pending & SDMMC_INT_RXDR) { + mci_writel(host, RINTSTS, SDMMC_INT_RXDR); + if (host->dir_status == DW_MCI_RECV_STATUS && host->sg) + dw_mci_read_data_pio(host, false); + } + + if (pending & SDMMC_INT_TXDR) { + mci_writel(host, RINTSTS, SDMMC_INT_TXDR); + if (host->dir_status == DW_MCI_SEND_STATUS && host->sg) + dw_mci_write_data_pio(host); + } + + if (pending & SDMMC_INT_CMD_DONE) { + mci_writel(host, RINTSTS, SDMMC_INT_CMD_DONE); + dw_mci_cmd_interrupt(host, pending); + } + + if (pending & SDMMC_INT_CD) { + mci_writel(host, RINTSTS, SDMMC_INT_CD); + queue_work(host->card_workqueue, &host->card_work); + } + + /* Handle SDIO Interrupts */ + for (i = 0; i < host->num_slots; i++) { + struct dw_mci_slot *slot = host->slot[i]; + if (pending & SDMMC_INT_SDIO(i)) { + mci_writel(host, RINTSTS, SDMMC_INT_SDIO(i)); + mmc_signal_sdio_irq(slot->mmc); + } + } + + } + +#ifdef CONFIG_MMC_DW_IDMAC + /* Handle DMA interrupts */ + pending = mci_readl(host, IDSTS); + if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) { + mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI); + mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI); + host->dma_ops->complete(host); + } +#endif + + return IRQ_HANDLED; +} + +static void dw_mci_work_routine_card(struct work_struct *work) +{ + struct dw_mci *host = container_of(work, struct dw_mci, card_work); + int i; + + for (i = 0; i < host->num_slots; i++) { + struct dw_mci_slot *slot = host->slot[i]; + struct mmc_host *mmc = slot->mmc; + struct mmc_request *mrq; + int present; + + present = dw_mci_get_cd(mmc); + while (present != slot->last_detect_state) { + dev_dbg(&slot->mmc->class_dev, "card %s\n", + present ? "inserted" : "removed"); + + spin_lock_bh(&host->lock); + + /* Card change detected */ + slot->last_detect_state = present; + + /* Clean up queue if present */ + mrq = slot->mrq; + if (mrq) { + if (mrq == host->mrq) { + host->data = NULL; + host->cmd = NULL; + + switch (host->state) { + case STATE_IDLE: + break; + case STATE_SENDING_CMD: + mrq->cmd->error = -ENOMEDIUM; + if (!mrq->data) + break; + /* fall through */ + case STATE_SENDING_DATA: + mrq->data->error = -ENOMEDIUM; + dw_mci_stop_dma(host); + break; + case STATE_DATA_BUSY: + case STATE_DATA_ERROR: + if (mrq->data->error == -EINPROGRESS) + mrq->data->error = -ENOMEDIUM; + /* fall through */ + case STATE_SENDING_STOP: + if (mrq->stop) + mrq->stop->error = -ENOMEDIUM; + break; + } + + dw_mci_request_end(host, mrq); + } else { + list_del(&slot->queue_node); + mrq->cmd->error = -ENOMEDIUM; + if (mrq->data) + mrq->data->error = -ENOMEDIUM; + if (mrq->stop) + mrq->stop->error = -ENOMEDIUM; + + spin_unlock(&host->lock); + mmc_request_done(slot->mmc, mrq); + spin_lock(&host->lock); + } + } + + /* Power down slot */ + if (present == 0) { + /* Clear down the FIFO */ + dw_mci_fifo_reset(host); +#ifdef CONFIG_MMC_DW_IDMAC + dw_mci_idmac_reset(host); +#endif + + } + + spin_unlock_bh(&host->lock); + + present = dw_mci_get_cd(mmc); + } + + mmc_detect_change(slot->mmc, + msecs_to_jiffies(host->pdata->detect_delay_ms)); + } +} + +#ifdef CONFIG_OF +/* given a slot id, find out the device node representing that slot */ +static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot) +{ + struct device_node *np; + const __be32 *addr; + int len; + + if (!dev || !dev->of_node) + return NULL; + + for_each_child_of_node(dev->of_node, np) { + addr = of_get_property(np, "reg", &len); + if (!addr || (len < sizeof(int))) + continue; + if (be32_to_cpup(addr) == slot) + return np; + } + return NULL; +} + +static struct dw_mci_of_slot_quirks { + char *quirk; + int id; +} of_slot_quirks[] = { + { + .quirk = "disable-wp", + .id = DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT, + }, +}; + +static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot) +{ + struct device_node *np = dw_mci_of_find_slot_node(dev, slot); + int quirks = 0; + int idx; + + /* get quirks */ + for (idx = 0; idx < ARRAY_SIZE(of_slot_quirks); idx++) + if (of_get_property(np, of_slot_quirks[idx].quirk, NULL)) + quirks |= of_slot_quirks[idx].id; + + return quirks; +} +#else /* CONFIG_OF */ +static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot) +{ + return 0; +} +static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot) +{ + return NULL; +} +#endif /* CONFIG_OF */ + +static int dw_mci_init_slot(struct dw_mci *host, unsigned int id) +{ + struct mmc_host *mmc; + struct dw_mci_slot *slot; + const struct dw_mci_drv_data *drv_data = host->drv_data; + int ctrl_id, ret; + u32 freq[2]; + + mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), host->dev); + if (!mmc) + return -ENOMEM; + + slot = mmc_priv(mmc); + slot->id = id; + slot->mmc = mmc; + slot->host = host; + host->slot[id] = slot; + + slot->quirks = dw_mci_of_get_slot_quirks(host->dev, slot->id); + + mmc->ops = &dw_mci_ops; + if (of_property_read_u32_array(host->dev->of_node, + "clock-freq-min-max", freq, 2)) { + mmc->f_min = DW_MCI_FREQ_MIN; + mmc->f_max = DW_MCI_FREQ_MAX; + } else { + mmc->f_min = freq[0]; + mmc->f_max = freq[1]; + } + + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + + if (host->pdata->caps) + mmc->caps = host->pdata->caps; + + if (host->pdata->pm_caps) + mmc->pm_caps = host->pdata->pm_caps; + + if (host->dev->of_node) { + ctrl_id = of_alias_get_id(host->dev->of_node, "mshc"); + if (ctrl_id < 0) + ctrl_id = 0; + } else { + ctrl_id = to_platform_device(host->dev)->id; + } + if (drv_data && drv_data->caps) + mmc->caps |= drv_data->caps[ctrl_id]; + + if (host->pdata->caps2) + mmc->caps2 = host->pdata->caps2; + + mmc_of_parse(mmc); + + if (host->pdata->blk_settings) { + mmc->max_segs = host->pdata->blk_settings->max_segs; + mmc->max_blk_size = host->pdata->blk_settings->max_blk_size; + mmc->max_blk_count = host->pdata->blk_settings->max_blk_count; + mmc->max_req_size = host->pdata->blk_settings->max_req_size; + mmc->max_seg_size = host->pdata->blk_settings->max_seg_size; + } else { + /* Useful defaults if platform data is unset. */ +#ifdef CONFIG_MMC_DW_IDMAC + mmc->max_segs = host->ring_size; + mmc->max_blk_size = 65536; + mmc->max_blk_count = host->ring_size; + mmc->max_seg_size = 0x1000; + mmc->max_req_size = mmc->max_seg_size * mmc->max_blk_count; +#else + mmc->max_segs = 64; + mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */ + mmc->max_blk_count = 512; + mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; + mmc->max_seg_size = mmc->max_req_size; +#endif /* CONFIG_MMC_DW_IDMAC */ + } + + if (dw_mci_get_cd(mmc)) + set_bit(DW_MMC_CARD_PRESENT, &slot->flags); + else + clear_bit(DW_MMC_CARD_PRESENT, &slot->flags); + + ret = mmc_add_host(mmc); + if (ret) + goto err_setup_bus; + +#if defined(CONFIG_DEBUG_FS) + dw_mci_init_debugfs(slot); +#endif + + /* Card initially undetected */ + slot->last_detect_state = 0; + + return 0; + +err_setup_bus: + mmc_free_host(mmc); + return -EINVAL; +} + +static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id) +{ + /* Debugfs stuff is cleaned up by mmc core */ + mmc_remove_host(slot->mmc); + slot->host->slot[id] = NULL; + mmc_free_host(slot->mmc); +} + +static void dw_mci_init_dma(struct dw_mci *host) +{ + /* Alloc memory for sg translation */ + host->sg_cpu = dmam_alloc_coherent(host->dev, PAGE_SIZE, + &host->sg_dma, GFP_KERNEL); + if (!host->sg_cpu) { + dev_err(host->dev, "%s: could not alloc DMA memory\n", + __func__); + goto no_dma; + } + + /* Determine which DMA interface to use */ +#ifdef CONFIG_MMC_DW_IDMAC + host->dma_ops = &dw_mci_idmac_ops; + dev_info(host->dev, "Using internal DMA controller.\n"); +#endif + + if (!host->dma_ops) + goto no_dma; + + if (host->dma_ops->init && host->dma_ops->start && + host->dma_ops->stop && host->dma_ops->cleanup) { + if (host->dma_ops->init(host)) { + dev_err(host->dev, "%s: Unable to initialize " + "DMA Controller.\n", __func__); + goto no_dma; + } + } else { + dev_err(host->dev, "DMA initialization not found.\n"); + goto no_dma; + } + + host->use_dma = 1; + return; + +no_dma: + dev_info(host->dev, "Using PIO mode.\n"); + host->use_dma = 0; + return; +} + +static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(500); + u32 ctrl; + + ctrl = mci_readl(host, CTRL); + ctrl |= reset; + mci_writel(host, CTRL, ctrl); + + /* wait till resets clear */ + do { + ctrl = mci_readl(host, CTRL); + if (!(ctrl & reset)) + return true; + } while (time_before(jiffies, timeout)); + + dev_err(host->dev, + "Timeout resetting block (ctrl reset %#x)\n", + ctrl & reset); + + return false; +} + +static inline bool dw_mci_fifo_reset(struct dw_mci *host) +{ + /* + * Reseting generates a block interrupt, hence setting + * the scatter-gather pointer to NULL. + */ + if (host->sg) { + sg_miter_stop(&host->sg_miter); + host->sg = NULL; + } + + return dw_mci_ctrl_reset(host, SDMMC_CTRL_FIFO_RESET); +} + +static inline bool dw_mci_ctrl_all_reset(struct dw_mci *host) +{ + return dw_mci_ctrl_reset(host, + SDMMC_CTRL_FIFO_RESET | + SDMMC_CTRL_RESET | + SDMMC_CTRL_DMA_RESET); +} + +#ifdef CONFIG_OF +static struct dw_mci_of_quirks { + char *quirk; + int id; +} of_quirks[] = { + { + .quirk = "broken-cd", + .id = DW_MCI_QUIRK_BROKEN_CARD_DETECTION, + }, +}; + +static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host) +{ + struct dw_mci_board *pdata; + struct device *dev = host->dev; + struct device_node *np = dev->of_node; + const struct dw_mci_drv_data *drv_data = host->drv_data; + int idx, ret; + u32 clock_frequency; + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(dev, "could not allocate memory for pdata\n"); + return ERR_PTR(-ENOMEM); + } + + /* find out number of slots supported */ + if (of_property_read_u32(dev->of_node, "num-slots", + &pdata->num_slots)) { + dev_info(dev, "num-slots property not found, " + "assuming 1 slot is available\n"); + pdata->num_slots = 1; + } + + /* get quirks */ + for (idx = 0; idx < ARRAY_SIZE(of_quirks); idx++) + if (of_get_property(np, of_quirks[idx].quirk, NULL)) + pdata->quirks |= of_quirks[idx].id; + + if (of_property_read_u32(np, "fifo-depth", &pdata->fifo_depth)) + dev_info(dev, "fifo-depth property not found, using " + "value of FIFOTH register as default\n"); + + of_property_read_u32(np, "card-detect-delay", &pdata->detect_delay_ms); + + if (!of_property_read_u32(np, "clock-frequency", &clock_frequency)) + pdata->bus_hz = clock_frequency; + + if (drv_data && drv_data->parse_dt) { + ret = drv_data->parse_dt(host); + if (ret) + return ERR_PTR(ret); + } + + if (of_find_property(np, "supports-highspeed", NULL)) + pdata->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED; + + return pdata; +} + +#else /* CONFIG_OF */ +static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host) +{ + return ERR_PTR(-EINVAL); +} +#endif /* CONFIG_OF */ + +int dw_mci_probe(struct dw_mci *host) +{ + const struct dw_mci_drv_data *drv_data = host->drv_data; + int width, i, ret = 0; + u32 fifo_size; + int init_slots = 0; + + if (!host->pdata) { + host->pdata = dw_mci_parse_dt(host); + if (IS_ERR(host->pdata)) { + dev_err(host->dev, "platform data not available\n"); + return -EINVAL; + } + } + + if (host->pdata->num_slots > 1) { + dev_err(host->dev, + "Platform data must supply num_slots.\n"); + return -ENODEV; + } + + host->biu_clk = devm_clk_get(host->dev, "biu"); + if (IS_ERR(host->biu_clk)) { + dev_dbg(host->dev, "biu clock not available\n"); + } else { + ret = clk_prepare_enable(host->biu_clk); + if (ret) { + dev_err(host->dev, "failed to enable biu clock\n"); + return ret; + } + } + + host->ciu_clk = devm_clk_get(host->dev, "ciu"); + if (IS_ERR(host->ciu_clk)) { + dev_dbg(host->dev, "ciu clock not available\n"); + host->bus_hz = host->pdata->bus_hz; + } else { + ret = clk_prepare_enable(host->ciu_clk); + if (ret) { + dev_err(host->dev, "failed to enable ciu clock\n"); + goto err_clk_biu; + } + + if (host->pdata->bus_hz) { + ret = clk_set_rate(host->ciu_clk, host->pdata->bus_hz); + if (ret) + dev_warn(host->dev, + "Unable to set bus rate to %uHz\n", + host->pdata->bus_hz); + } + host->bus_hz = clk_get_rate(host->ciu_clk); + } + + if (!host->bus_hz) { + dev_err(host->dev, + "Platform data must supply bus speed\n"); + ret = -ENODEV; + goto err_clk_ciu; + } + + if (drv_data && drv_data->init) { + ret = drv_data->init(host); + if (ret) { + dev_err(host->dev, + "implementation specific init failed\n"); + goto err_clk_ciu; + } + } + + if (drv_data && drv_data->setup_clock) { + ret = drv_data->setup_clock(host); + if (ret) { + dev_err(host->dev, + "implementation specific clock setup failed\n"); + goto err_clk_ciu; + } + } + + host->vmmc = devm_regulator_get_optional(host->dev, "vmmc"); + if (IS_ERR(host->vmmc)) { + ret = PTR_ERR(host->vmmc); + if (ret == -EPROBE_DEFER) + goto err_clk_ciu; + + dev_info(host->dev, "no vmmc regulator found: %d\n", ret); + host->vmmc = NULL; + } else { + ret = regulator_enable(host->vmmc); + if (ret) { + if (ret != -EPROBE_DEFER) + dev_err(host->dev, + "regulator_enable fail: %d\n", ret); + goto err_clk_ciu; + } + } + + host->quirks = host->pdata->quirks; + + spin_lock_init(&host->lock); + INIT_LIST_HEAD(&host->queue); + + /* + * Get the host data width - this assumes that HCON has been set with + * the correct values. + */ + i = (mci_readl(host, HCON) >> 7) & 0x7; + if (!i) { + host->push_data = dw_mci_push_data16; + host->pull_data = dw_mci_pull_data16; + width = 16; + host->data_shift = 1; + } else if (i == 2) { + host->push_data = dw_mci_push_data64; + host->pull_data = dw_mci_pull_data64; + width = 64; + host->data_shift = 3; + } else { + /* Check for a reserved value, and warn if it is */ + WARN((i != 1), + "HCON reports a reserved host data width!\n" + "Defaulting to 32-bit access.\n"); + host->push_data = dw_mci_push_data32; + host->pull_data = dw_mci_pull_data32; + width = 32; + host->data_shift = 2; + } + + /* Reset all blocks */ + if (!dw_mci_ctrl_all_reset(host)) + return -ENODEV; + + host->dma_ops = host->pdata->dma_ops; + dw_mci_init_dma(host); + + /* Clear the interrupts for the host controller */ + mci_writel(host, RINTSTS, 0xFFFFFFFF); + mci_writel(host, INTMASK, 0); /* disable all mmc interrupt first */ + + /* Put in max timeout */ + mci_writel(host, TMOUT, 0xFFFFFFFF); + + /* + * FIFO threshold settings RxMark = fifo_size / 2 - 1, + * Tx Mark = fifo_size / 2 DMA Size = 8 + */ + if (!host->pdata->fifo_depth) { + /* + * Power-on value of RX_WMark is FIFO_DEPTH-1, but this may + * have been overwritten by the bootloader, just like we're + * about to do, so if you know the value for your hardware, you + * should put it in the platform data. + */ + fifo_size = mci_readl(host, FIFOTH); + fifo_size = 1 + ((fifo_size >> 16) & 0xfff); + } else { + fifo_size = host->pdata->fifo_depth; + } + host->fifo_depth = fifo_size; + host->fifoth_val = + SDMMC_SET_FIFOTH(0x2, fifo_size / 2 - 1, fifo_size / 2); + mci_writel(host, FIFOTH, host->fifoth_val); + + /* disable clock to CIU */ + mci_writel(host, CLKENA, 0); + mci_writel(host, CLKSRC, 0); + + /* + * In 2.40a spec, Data offset is changed. + * Need to check the version-id and set data-offset for DATA register. + */ + host->verid = SDMMC_GET_VERID(mci_readl(host, VERID)); + dev_info(host->dev, "Version ID is %04x\n", host->verid); + + if (host->verid < DW_MMC_240A) + host->data_offset = DATA_OFFSET; + else + host->data_offset = DATA_240A_OFFSET; + + tasklet_init(&host->tasklet, dw_mci_tasklet_func, (unsigned long)host); + host->card_workqueue = alloc_workqueue("dw-mci-card", + WQ_MEM_RECLAIM, 1); + if (!host->card_workqueue) { + ret = -ENOMEM; + goto err_dmaunmap; + } + INIT_WORK(&host->card_work, dw_mci_work_routine_card); + ret = devm_request_irq(host->dev, host->irq, dw_mci_interrupt, + host->irq_flags, "dw-mci", host); + if (ret) + goto err_workqueue; + + if (host->pdata->num_slots) + host->num_slots = host->pdata->num_slots; + else + host->num_slots = ((mci_readl(host, HCON) >> 1) & 0x1F) + 1; + + /* + * Enable interrupts for command done, data over, data empty, card det, + * receive ready and error such as transmit, receive timeout, crc error + */ + mci_writel(host, RINTSTS, 0xFFFFFFFF); + mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER | + SDMMC_INT_TXDR | SDMMC_INT_RXDR | + DW_MCI_ERROR_FLAGS | SDMMC_INT_CD); + mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); /* Enable mci interrupt */ + + dev_info(host->dev, "DW MMC controller at irq %d, " + "%d bit host data width, " + "%u deep fifo\n", + host->irq, width, fifo_size); + + /* We need at least one slot to succeed */ + for (i = 0; i < host->num_slots; i++) { + ret = dw_mci_init_slot(host, i); + if (ret) + dev_dbg(host->dev, "slot %d init failed\n", i); + else + init_slots++; + } + + if (init_slots) { + dev_info(host->dev, "%d slots initialized\n", init_slots); + } else { + dev_dbg(host->dev, "attempted to initialize %d slots, " + "but failed on all\n", host->num_slots); + goto err_workqueue; + } + + if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO) + dev_info(host->dev, "Internal DMAC interrupt fix enabled.\n"); + + return 0; + +err_workqueue: + destroy_workqueue(host->card_workqueue); + +err_dmaunmap: + if (host->use_dma && host->dma_ops->exit) + host->dma_ops->exit(host); + if (host->vmmc) + regulator_disable(host->vmmc); + +err_clk_ciu: + if (!IS_ERR(host->ciu_clk)) + clk_disable_unprepare(host->ciu_clk); + +err_clk_biu: + if (!IS_ERR(host->biu_clk)) + clk_disable_unprepare(host->biu_clk); + + return ret; +} +EXPORT_SYMBOL(dw_mci_probe); + +void dw_mci_remove(struct dw_mci *host) +{ + int i; + + mci_writel(host, RINTSTS, 0xFFFFFFFF); + mci_writel(host, INTMASK, 0); /* disable all mmc interrupt first */ + + for (i = 0; i < host->num_slots; i++) { + dev_dbg(host->dev, "remove slot %d\n", i); + if (host->slot[i]) + dw_mci_cleanup_slot(host->slot[i], i); + } + + /* disable clock to CIU */ + mci_writel(host, CLKENA, 0); + mci_writel(host, CLKSRC, 0); + + destroy_workqueue(host->card_workqueue); + + if (host->use_dma && host->dma_ops->exit) + host->dma_ops->exit(host); + + if (host->vmmc) + regulator_disable(host->vmmc); + + if (!IS_ERR(host->ciu_clk)) + clk_disable_unprepare(host->ciu_clk); + + if (!IS_ERR(host->biu_clk)) + clk_disable_unprepare(host->biu_clk); +} +EXPORT_SYMBOL(dw_mci_remove); + + + +#ifdef CONFIG_PM_SLEEP +/* + * TODO: we should probably disable the clock to the card in the suspend path. + */ +int dw_mci_suspend(struct dw_mci *host) +{ + if (host->vmmc) + regulator_disable(host->vmmc); + + return 0; +} +EXPORT_SYMBOL(dw_mci_suspend); + +int dw_mci_resume(struct dw_mci *host) +{ + int i, ret; + + if (host->vmmc) { + ret = regulator_enable(host->vmmc); + if (ret) { + dev_err(host->dev, + "failed to enable regulator: %d\n", ret); + return ret; + } + } + + if (!dw_mci_ctrl_all_reset(host)) { + ret = -ENODEV; + return ret; + } + + if (host->use_dma && host->dma_ops->init) + host->dma_ops->init(host); + + /* + * Restore the initial value at FIFOTH register + * And Invalidate the prev_blksz with zero + */ + mci_writel(host, FIFOTH, host->fifoth_val); + host->prev_blksz = 0; + + /* Put in max timeout */ + mci_writel(host, TMOUT, 0xFFFFFFFF); + + mci_writel(host, RINTSTS, 0xFFFFFFFF); + mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER | + SDMMC_INT_TXDR | SDMMC_INT_RXDR | + DW_MCI_ERROR_FLAGS | SDMMC_INT_CD); + mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); + + for (i = 0; i < host->num_slots; i++) { + struct dw_mci_slot *slot = host->slot[i]; + if (!slot) + continue; + if (slot->mmc->pm_flags & MMC_PM_KEEP_POWER) { + dw_mci_set_ios(slot->mmc, &slot->mmc->ios); + dw_mci_setup_bus(slot, true); + } + } + return 0; +} +EXPORT_SYMBOL(dw_mci_resume); +#endif /* CONFIG_PM_SLEEP */ + +static int __init dw_mci_init(void) +{ + pr_info("Synopsys Designware Multimedia Card Interface Driver\n"); + return 0; +} + +static void __exit dw_mci_exit(void) +{ +} + +module_init(dw_mci_init); +module_exit(dw_mci_exit); + +MODULE_DESCRIPTION("DW Multimedia Card Interface driver"); +MODULE_AUTHOR("NXP Semiconductor VietNam"); +MODULE_AUTHOR("Imagination Technologies Ltd"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h new file mode 100644 index 00000000000..738fa241d05 --- /dev/null +++ b/drivers/mmc/host/dw_mmc.h @@ -0,0 +1,261 @@ +/* + * Synopsys DesignWare Multimedia Card Interface driver + * (Based on NXP driver for lpc 31xx) + * + * Copyright (C) 2009 NXP Semiconductors + * Copyright (C) 2009, 2010 Imagination Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _DW_MMC_H_ +#define _DW_MMC_H_ + +#define DW_MMC_240A 0x240a + +#define SDMMC_CTRL 0x000 +#define SDMMC_PWREN 0x004 +#define SDMMC_CLKDIV 0x008 +#define SDMMC_CLKSRC 0x00c +#define SDMMC_CLKENA 0x010 +#define SDMMC_TMOUT 0x014 +#define SDMMC_CTYPE 0x018 +#define SDMMC_BLKSIZ 0x01c +#define SDMMC_BYTCNT 0x020 +#define SDMMC_INTMASK 0x024 +#define SDMMC_CMDARG 0x028 +#define SDMMC_CMD 0x02c +#define SDMMC_RESP0 0x030 +#define SDMMC_RESP1 0x034 +#define SDMMC_RESP2 0x038 +#define SDMMC_RESP3 0x03c +#define SDMMC_MINTSTS 0x040 +#define SDMMC_RINTSTS 0x044 +#define SDMMC_STATUS 0x048 +#define SDMMC_FIFOTH 0x04c +#define SDMMC_CDETECT 0x050 +#define SDMMC_WRTPRT 0x054 +#define SDMMC_GPIO 0x058 +#define SDMMC_TCBCNT 0x05c +#define SDMMC_TBBCNT 0x060 +#define SDMMC_DEBNCE 0x064 +#define SDMMC_USRID 0x068 +#define SDMMC_VERID 0x06c +#define SDMMC_HCON 0x070 +#define SDMMC_UHS_REG 0x074 +#define SDMMC_BMOD 0x080 +#define SDMMC_PLDMND 0x084 +#define SDMMC_DBADDR 0x088 +#define SDMMC_IDSTS 0x08c +#define SDMMC_IDINTEN 0x090 +#define SDMMC_DSCADDR 0x094 +#define SDMMC_BUFADDR 0x098 +#define SDMMC_CDTHRCTL 0x100 +#define SDMMC_DATA(x) (x) + +/* + * Data offset is difference according to Version + * Lower than 2.40a : data register offest is 0x100 + */ +#define DATA_OFFSET 0x100 +#define DATA_240A_OFFSET 0x200 + +/* shift bit field */ +#define _SBF(f, v) ((v) << (f)) + +/* Control register defines */ +#define SDMMC_CTRL_USE_IDMAC BIT(25) +#define SDMMC_CTRL_CEATA_INT_EN BIT(11) +#define SDMMC_CTRL_SEND_AS_CCSD BIT(10) +#define SDMMC_CTRL_SEND_CCSD BIT(9) +#define SDMMC_CTRL_ABRT_READ_DATA BIT(8) +#define SDMMC_CTRL_SEND_IRQ_RESP BIT(7) +#define SDMMC_CTRL_READ_WAIT BIT(6) +#define SDMMC_CTRL_DMA_ENABLE BIT(5) +#define SDMMC_CTRL_INT_ENABLE BIT(4) +#define SDMMC_CTRL_DMA_RESET BIT(2) +#define SDMMC_CTRL_FIFO_RESET BIT(1) +#define SDMMC_CTRL_RESET BIT(0) +/* Clock Enable register defines */ +#define SDMMC_CLKEN_LOW_PWR BIT(16) +#define SDMMC_CLKEN_ENABLE BIT(0) +/* time-out register defines */ +#define SDMMC_TMOUT_DATA(n) _SBF(8, (n)) +#define SDMMC_TMOUT_DATA_MSK 0xFFFFFF00 +#define SDMMC_TMOUT_RESP(n) ((n) & 0xFF) +#define SDMMC_TMOUT_RESP_MSK 0xFF +/* card-type register defines */ +#define SDMMC_CTYPE_8BIT BIT(16) +#define SDMMC_CTYPE_4BIT BIT(0) +#define SDMMC_CTYPE_1BIT 0 +/* Interrupt status & mask register defines */ +#define SDMMC_INT_SDIO(n) BIT(16 + (n)) +#define SDMMC_INT_EBE BIT(15) +#define SDMMC_INT_ACD BIT(14) +#define SDMMC_INT_SBE BIT(13) +#define SDMMC_INT_HLE BIT(12) +#define SDMMC_INT_FRUN BIT(11) +#define SDMMC_INT_HTO BIT(10) +#define SDMMC_INT_DRTO BIT(9) +#define SDMMC_INT_RTO BIT(8) +#define SDMMC_INT_DCRC BIT(7) +#define SDMMC_INT_RCRC BIT(6) +#define SDMMC_INT_RXDR BIT(5) +#define SDMMC_INT_TXDR BIT(4) +#define SDMMC_INT_DATA_OVER BIT(3) +#define SDMMC_INT_CMD_DONE BIT(2) +#define SDMMC_INT_RESP_ERR BIT(1) +#define SDMMC_INT_CD BIT(0) +#define SDMMC_INT_ERROR 0xbfc2 +/* Command register defines */ +#define SDMMC_CMD_START BIT(31) +#define SDMMC_CMD_USE_HOLD_REG BIT(29) +#define SDMMC_CMD_CCS_EXP BIT(23) +#define SDMMC_CMD_CEATA_RD BIT(22) +#define SDMMC_CMD_UPD_CLK BIT(21) +#define SDMMC_CMD_INIT BIT(15) +#define SDMMC_CMD_STOP BIT(14) +#define SDMMC_CMD_PRV_DAT_WAIT BIT(13) +#define SDMMC_CMD_SEND_STOP BIT(12) +#define SDMMC_CMD_STRM_MODE BIT(11) +#define SDMMC_CMD_DAT_WR BIT(10) +#define SDMMC_CMD_DAT_EXP BIT(9) +#define SDMMC_CMD_RESP_CRC BIT(8) +#define SDMMC_CMD_RESP_LONG BIT(7) +#define SDMMC_CMD_RESP_EXP BIT(6) +#define SDMMC_CMD_INDX(n) ((n) & 0x1F) +/* Status register defines */ +#define SDMMC_GET_FCNT(x) (((x)>>17) & 0x1FFF) +/* FIFOTH register defines */ +#define SDMMC_SET_FIFOTH(m, r, t) (((m) & 0x7) << 28 | \ + ((r) & 0xFFF) << 16 | \ + ((t) & 0xFFF)) +/* Internal DMAC interrupt defines */ +#define SDMMC_IDMAC_INT_AI BIT(9) +#define SDMMC_IDMAC_INT_NI BIT(8) +#define SDMMC_IDMAC_INT_CES BIT(5) +#define SDMMC_IDMAC_INT_DU BIT(4) +#define SDMMC_IDMAC_INT_FBE BIT(2) +#define SDMMC_IDMAC_INT_RI BIT(1) +#define SDMMC_IDMAC_INT_TI BIT(0) +/* Internal DMAC bus mode bits */ +#define SDMMC_IDMAC_ENABLE BIT(7) +#define SDMMC_IDMAC_FB BIT(1) +#define SDMMC_IDMAC_SWRESET BIT(0) +/* Version ID register define */ +#define SDMMC_GET_VERID(x) ((x) & 0xFFFF) +/* Card read threshold */ +#define SDMMC_SET_RD_THLD(v, x) (((v) & 0x1FFF) << 16 | (x)) + +/* Register access macros */ +#define mci_readl(dev, reg) \ + __raw_readl((dev)->regs + SDMMC_##reg) +#define mci_writel(dev, reg, value) \ + __raw_writel((value), (dev)->regs + SDMMC_##reg) + +/* 16-bit FIFO access macros */ +#define mci_readw(dev, reg) \ + __raw_readw((dev)->regs + SDMMC_##reg) +#define mci_writew(dev, reg, value) \ + __raw_writew((value), (dev)->regs + SDMMC_##reg) + +/* 64-bit FIFO access macros */ +#ifdef readq +#define mci_readq(dev, reg) \ + __raw_readq((dev)->regs + SDMMC_##reg) +#define mci_writeq(dev, reg, value) \ + __raw_writeq((value), (dev)->regs + SDMMC_##reg) +#else +/* + * Dummy readq implementation for architectures that don't define it. + * + * We would assume that none of these architectures would configure + * the IP block with a 64bit FIFO width, so this code will never be + * executed on those machines. Defining these macros here keeps the + * rest of the code free from ifdefs. + */ +#define mci_readq(dev, reg) \ + (*(volatile u64 __force *)((dev)->regs + SDMMC_##reg)) +#define mci_writeq(dev, reg, value) \ + (*(volatile u64 __force *)((dev)->regs + SDMMC_##reg) = (value)) +#endif + +extern int dw_mci_probe(struct dw_mci *host); +extern void dw_mci_remove(struct dw_mci *host); +#ifdef CONFIG_PM_SLEEP +extern int dw_mci_suspend(struct dw_mci *host); +extern int dw_mci_resume(struct dw_mci *host); +#endif + +/** + * struct dw_mci_slot - MMC slot state + * @mmc: The mmc_host representing this slot. + * @host: The MMC controller this slot is using. + * @quirks: Slot-level quirks (DW_MCI_SLOT_QUIRK_XXX) + * @ctype: Card type for this slot. + * @mrq: mmc_request currently being processed or waiting to be + * processed, or NULL when the slot is idle. + * @queue_node: List node for placing this node in the @queue list of + * &struct dw_mci. + * @clock: Clock rate configured by set_ios(). Protected by host->lock. + * @__clk_old: The last updated clock with reflecting clock divider. + * Keeping track of this helps us to avoid spamming the console + * with CONFIG_MMC_CLKGATE. + * @flags: Random state bits associated with the slot. + * @id: Number of this slot. + * @last_detect_state: Most recently observed card detect state. + */ +struct dw_mci_slot { + struct mmc_host *mmc; + struct dw_mci *host; + + int quirks; + + u32 ctype; + + struct mmc_request *mrq; + struct list_head queue_node; + + unsigned int clock; + unsigned int __clk_old; + + unsigned long flags; +#define DW_MMC_CARD_PRESENT 0 +#define DW_MMC_CARD_NEED_INIT 1 + int id; + int last_detect_state; +}; + +struct dw_mci_tuning_data { + const u8 *blk_pattern; + unsigned int blksz; +}; + +/** + * dw_mci driver data - dw-mshc implementation specific driver data. + * @caps: mmc subsystem specified capabilities of the controller(s). + * @init: early implementation specific initialization. + * @setup_clock: implementation specific clock configuration. + * @prepare_command: handle CMD register extensions. + * @set_ios: handle bus specific extensions. + * @parse_dt: parse implementation specific device tree properties. + * @execute_tuning: implementation specific tuning procedure. + * + * Provide controller implementation specific extensions. The usage of this + * data structure is fully optional and usage of each member in this structure + * is optional as well. + */ +struct dw_mci_drv_data { + unsigned long *caps; + int (*init)(struct dw_mci *host); + int (*setup_clock)(struct dw_mci *host); + void (*prepare_command)(struct dw_mci *host, u32 *cmdr); + void (*set_ios)(struct dw_mci *host, struct mmc_ios *ios); + int (*parse_dt)(struct dw_mci *host); + int (*execute_tuning)(struct dw_mci_slot *slot, u32 opcode, + struct dw_mci_tuning_data *tuning_data); +}; +#endif /* _DW_MMC_H_ */ diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c deleted file mode 100644 index 881f7ba545a..00000000000 --- a/drivers/mmc/host/imxmmc.c +++ /dev/null @@ -1,1169 +0,0 @@ -/* - * linux/drivers/mmc/host/imxmmc.c - Motorola i.MX MMCI driver - * - * Copyright (C) 2004 Sascha Hauer, Pengutronix <sascha@saschahauer.de> - * Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com> - * - * derived from pxamci.c by Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/blkdev.h> -#include <linux/dma-mapping.h> -#include <linux/mmc/host.h> -#include <linux/mmc/card.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <asm/dma.h> -#include <asm/irq.h> -#include <asm/sizes.h> -#include <mach/mmc.h> -#include <mach/imx-dma.h> - -#include "imxmmc.h" - -#define DRIVER_NAME "imx-mmc" - -#define IMXMCI_INT_MASK_DEFAULT (INT_MASK_BUF_READY | INT_MASK_DATA_TRAN | \ - INT_MASK_WRITE_OP_DONE | INT_MASK_END_CMD_RES | \ - INT_MASK_AUTO_CARD_DETECT | INT_MASK_DAT0_EN | INT_MASK_SDIO) - -struct imxmci_host { - struct mmc_host *mmc; - spinlock_t lock; - struct resource *res; - void __iomem *base; - int irq; - imx_dmach_t dma; - volatile unsigned int imask; - unsigned int power_mode; - unsigned int present; - struct imxmmc_platform_data *pdata; - - struct mmc_request *req; - struct mmc_command *cmd; - struct mmc_data *data; - - struct timer_list timer; - struct tasklet_struct tasklet; - unsigned int status_reg; - unsigned long pending_events; - /* Next two fields are there for CPU driven transfers to overcome SDHC deficiencies */ - u16 *data_ptr; - unsigned int data_cnt; - atomic_t stuck_timeout; - - unsigned int dma_nents; - unsigned int dma_size; - unsigned int dma_dir; - int dma_allocated; - - unsigned char actual_bus_width; - - int prev_cmd_code; - - struct clk *clk; -}; - -#define IMXMCI_PEND_IRQ_b 0 -#define IMXMCI_PEND_DMA_END_b 1 -#define IMXMCI_PEND_DMA_ERR_b 2 -#define IMXMCI_PEND_WAIT_RESP_b 3 -#define IMXMCI_PEND_DMA_DATA_b 4 -#define IMXMCI_PEND_CPU_DATA_b 5 -#define IMXMCI_PEND_CARD_XCHG_b 6 -#define IMXMCI_PEND_SET_INIT_b 7 -#define IMXMCI_PEND_STARTED_b 8 - -#define IMXMCI_PEND_IRQ_m (1 << IMXMCI_PEND_IRQ_b) -#define IMXMCI_PEND_DMA_END_m (1 << IMXMCI_PEND_DMA_END_b) -#define IMXMCI_PEND_DMA_ERR_m (1 << IMXMCI_PEND_DMA_ERR_b) -#define IMXMCI_PEND_WAIT_RESP_m (1 << IMXMCI_PEND_WAIT_RESP_b) -#define IMXMCI_PEND_DMA_DATA_m (1 << IMXMCI_PEND_DMA_DATA_b) -#define IMXMCI_PEND_CPU_DATA_m (1 << IMXMCI_PEND_CPU_DATA_b) -#define IMXMCI_PEND_CARD_XCHG_m (1 << IMXMCI_PEND_CARD_XCHG_b) -#define IMXMCI_PEND_SET_INIT_m (1 << IMXMCI_PEND_SET_INIT_b) -#define IMXMCI_PEND_STARTED_m (1 << IMXMCI_PEND_STARTED_b) - -static void imxmci_stop_clock(struct imxmci_host *host) -{ - int i = 0; - u16 reg; - - reg = readw(host->base + MMC_REG_STR_STP_CLK); - writew(reg & ~STR_STP_CLK_START_CLK, host->base + MMC_REG_STR_STP_CLK); - while (i < 0x1000) { - if (!(i & 0x7f)) { - reg = readw(host->base + MMC_REG_STR_STP_CLK); - writew(reg | STR_STP_CLK_STOP_CLK, - host->base + MMC_REG_STR_STP_CLK); - } - - reg = readw(host->base + MMC_REG_STATUS); - if (!(reg & STATUS_CARD_BUS_CLK_RUN)) { - /* Check twice before cut */ - reg = readw(host->base + MMC_REG_STATUS); - if (!(reg & STATUS_CARD_BUS_CLK_RUN)) - return; - } - - i++; - } - dev_dbg(mmc_dev(host->mmc), "imxmci_stop_clock blocked, no luck\n"); -} - -static int imxmci_start_clock(struct imxmci_host *host) -{ - unsigned int trials = 0; - unsigned int delay_limit = 128; - unsigned long flags; - u16 reg; - - reg = readw(host->base + MMC_REG_STR_STP_CLK); - writew(reg & ~STR_STP_CLK_STOP_CLK, host->base + MMC_REG_STR_STP_CLK); - - clear_bit(IMXMCI_PEND_STARTED_b, &host->pending_events); - - /* - * Command start of the clock, this usually succeeds in less - * then 6 delay loops, but during card detection (low clockrate) - * it takes up to 5000 delay loops and sometimes fails for the first time - */ - reg = readw(host->base + MMC_REG_STR_STP_CLK); - writew(reg | STR_STP_CLK_START_CLK, host->base + MMC_REG_STR_STP_CLK); - - do { - unsigned int delay = delay_limit; - - while (delay--) { - reg = readw(host->base + MMC_REG_STATUS); - if (reg & STATUS_CARD_BUS_CLK_RUN) { - /* Check twice before cut */ - reg = readw(host->base + MMC_REG_STATUS); - if (reg & STATUS_CARD_BUS_CLK_RUN) - return 0; - } - - if (test_bit(IMXMCI_PEND_STARTED_b, &host->pending_events)) - return 0; - } - - local_irq_save(flags); - /* - * Ensure, that request is not doubled under all possible circumstances. - * It is possible, that cock running state is missed, because some other - * IRQ or schedule delays this function execution and the clocks has - * been already stopped by other means (response processing, SDHC HW) - */ - if (!test_bit(IMXMCI_PEND_STARTED_b, &host->pending_events)) { - reg = readw(host->base + MMC_REG_STR_STP_CLK); - writew(reg | STR_STP_CLK_START_CLK, - host->base + MMC_REG_STR_STP_CLK); - } - local_irq_restore(flags); - - } while (++trials < 256); - - dev_err(mmc_dev(host->mmc), "imxmci_start_clock blocked, no luck\n"); - - return -1; -} - -static void imxmci_softreset(struct imxmci_host *host) -{ - int i; - - /* reset sequence */ - writew(0x08, host->base + MMC_REG_STR_STP_CLK); - writew(0x0D, host->base + MMC_REG_STR_STP_CLK); - - for (i = 0; i < 8; i++) - writew(0x05, host->base + MMC_REG_STR_STP_CLK); - - writew(0xff, host->base + MMC_REG_RES_TO); - writew(512, host->base + MMC_REG_BLK_LEN); - writew(1, host->base + MMC_REG_NOB); -} - -static int imxmci_busy_wait_for_status(struct imxmci_host *host, - unsigned int *pstat, unsigned int stat_mask, - int timeout, const char *where) -{ - int loops = 0; - - while (!(*pstat & stat_mask)) { - loops += 2; - if (loops >= timeout) { - dev_dbg(mmc_dev(host->mmc), "busy wait timeout in %s, STATUS = 0x%x (0x%x)\n", - where, *pstat, stat_mask); - return -1; - } - udelay(2); - *pstat |= readw(host->base + MMC_REG_STATUS); - } - if (!loops) - return 0; - - /* The busy-wait is expected there for clock <8MHz due to SDHC hardware flaws */ - if (!(stat_mask & STATUS_END_CMD_RESP) || (host->mmc->ios.clock >= 8000000)) - dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n", - loops, where, *pstat, stat_mask); - return loops; -} - -static void imxmci_setup_data(struct imxmci_host *host, struct mmc_data *data) -{ - unsigned int nob = data->blocks; - unsigned int blksz = data->blksz; - unsigned int datasz = nob * blksz; - int i; - - if (data->flags & MMC_DATA_STREAM) - nob = 0xffff; - - host->data = data; - data->bytes_xfered = 0; - - writew(nob, host->base + MMC_REG_NOB); - writew(blksz, host->base + MMC_REG_BLK_LEN); - - /* - * DMA cannot be used for small block sizes, we have to use CPU driven transfers otherwise. - * We are in big troubles for non-512 byte transfers according to note in the paragraph - * 20.6.7 of User Manual anyway, but we need to be able to transfer SCR at least. - * The situation is even more complex in reality. The SDHC in not able to handle wll - * partial FIFO fills and reads. The length has to be rounded up to burst size multiple. - * This is required for SCR read at least. - */ - if (datasz < 512) { - host->dma_size = datasz; - if (data->flags & MMC_DATA_READ) { - host->dma_dir = DMA_FROM_DEVICE; - - /* Hack to enable read SCR */ - writew(1, host->base + MMC_REG_NOB); - writew(512, host->base + MMC_REG_BLK_LEN); - } else { - host->dma_dir = DMA_TO_DEVICE; - } - - /* Convert back to virtual address */ - host->data_ptr = (u16 *)sg_virt(data->sg); - host->data_cnt = 0; - - clear_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events); - set_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events); - - return; - } - - if (data->flags & MMC_DATA_READ) { - host->dma_dir = DMA_FROM_DEVICE; - host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg, - data->sg_len, host->dma_dir); - - imx_dma_setup_sg(host->dma, data->sg, data->sg_len, datasz, - host->res->start + MMC_REG_BUFFER_ACCESS, - DMA_MODE_READ); - - /*imx_dma_setup_mem2dev_ccr(host->dma, DMA_MODE_READ, IMX_DMA_WIDTH_16, CCR_REN);*/ - CCR(host->dma) = CCR_DMOD_LINEAR | CCR_DSIZ_32 | CCR_SMOD_FIFO | CCR_SSIZ_16 | CCR_REN; - } else { - host->dma_dir = DMA_TO_DEVICE; - - host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg, - data->sg_len, host->dma_dir); - - imx_dma_setup_sg(host->dma, data->sg, data->sg_len, datasz, - host->res->start + MMC_REG_BUFFER_ACCESS, - DMA_MODE_WRITE); - - /*imx_dma_setup_mem2dev_ccr(host->dma, DMA_MODE_WRITE, IMX_DMA_WIDTH_16, CCR_REN);*/ - CCR(host->dma) = CCR_SMOD_LINEAR | CCR_SSIZ_32 | CCR_DMOD_FIFO | CCR_DSIZ_16 | CCR_REN; - } - -#if 1 /* This code is there only for consistency checking and can be disabled in future */ - host->dma_size = 0; - for (i = 0; i < host->dma_nents; i++) - host->dma_size += data->sg[i].length; - - if (datasz > host->dma_size) { - dev_err(mmc_dev(host->mmc), "imxmci_setup_data datasz 0x%x > 0x%x dm_size\n", - datasz, host->dma_size); - } -#endif - - host->dma_size = datasz; - - wmb(); - - set_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events); - clear_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events); - - /* start DMA engine for read, write is delayed after initial response */ - if (host->dma_dir == DMA_FROM_DEVICE) - imx_dma_enable(host->dma); -} - -static void imxmci_start_cmd(struct imxmci_host *host, struct mmc_command *cmd, unsigned int cmdat) -{ - unsigned long flags; - u32 imask; - - WARN_ON(host->cmd != NULL); - host->cmd = cmd; - - /* Ensure, that clock are stopped else command programming and start fails */ - imxmci_stop_clock(host); - - if (cmd->flags & MMC_RSP_BUSY) - cmdat |= CMD_DAT_CONT_BUSY; - - switch (mmc_resp_type(cmd)) { - case MMC_RSP_R1: /* short CRC, OPCODE */ - case MMC_RSP_R1B:/* short CRC, OPCODE, BUSY */ - cmdat |= CMD_DAT_CONT_RESPONSE_FORMAT_R1; - break; - case MMC_RSP_R2: /* long 136 bit + CRC */ - cmdat |= CMD_DAT_CONT_RESPONSE_FORMAT_R2; - break; - case MMC_RSP_R3: /* short */ - cmdat |= CMD_DAT_CONT_RESPONSE_FORMAT_R3; - break; - default: - break; - } - - if (test_and_clear_bit(IMXMCI_PEND_SET_INIT_b, &host->pending_events)) - cmdat |= CMD_DAT_CONT_INIT; /* This command needs init */ - - if (host->actual_bus_width == MMC_BUS_WIDTH_4) - cmdat |= CMD_DAT_CONT_BUS_WIDTH_4; - - writew(cmd->opcode, host->base + MMC_REG_CMD); - writew(cmd->arg >> 16, host->base + MMC_REG_ARGH); - writew(cmd->arg & 0xffff, host->base + MMC_REG_ARGL); - writew(cmdat, host->base + MMC_REG_CMD_DAT_CONT); - - atomic_set(&host->stuck_timeout, 0); - set_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events); - - - imask = IMXMCI_INT_MASK_DEFAULT; - imask &= ~INT_MASK_END_CMD_RES; - if (cmdat & CMD_DAT_CONT_DATA_ENABLE) { - /* imask &= ~INT_MASK_BUF_READY; */ - imask &= ~INT_MASK_DATA_TRAN; - if (cmdat & CMD_DAT_CONT_WRITE) - imask &= ~INT_MASK_WRITE_OP_DONE; - if (test_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events)) - imask &= ~INT_MASK_BUF_READY; - } - - spin_lock_irqsave(&host->lock, flags); - host->imask = imask; - writew(host->imask, host->base + MMC_REG_INT_MASK); - spin_unlock_irqrestore(&host->lock, flags); - - dev_dbg(mmc_dev(host->mmc), "CMD%02d (0x%02x) mask set to 0x%04x\n", - cmd->opcode, cmd->opcode, imask); - - imxmci_start_clock(host); -} - -static void imxmci_finish_request(struct imxmci_host *host, struct mmc_request *req) -{ - unsigned long flags; - - spin_lock_irqsave(&host->lock, flags); - - host->pending_events &= ~(IMXMCI_PEND_WAIT_RESP_m | IMXMCI_PEND_DMA_END_m | - IMXMCI_PEND_DMA_DATA_m | IMXMCI_PEND_CPU_DATA_m); - - host->imask = IMXMCI_INT_MASK_DEFAULT; - writew(host->imask, host->base + MMC_REG_INT_MASK); - - spin_unlock_irqrestore(&host->lock, flags); - - if (req && req->cmd) - host->prev_cmd_code = req->cmd->opcode; - - host->req = NULL; - host->cmd = NULL; - host->data = NULL; - mmc_request_done(host->mmc, req); -} - -static int imxmci_finish_data(struct imxmci_host *host, unsigned int stat) -{ - struct mmc_data *data = host->data; - int data_error; - - if (test_and_clear_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)) { - imx_dma_disable(host->dma); - dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_nents, - host->dma_dir); - } - - if (stat & STATUS_ERR_MASK) { - dev_dbg(mmc_dev(host->mmc), "request failed. status: 0x%08x\n", stat); - if (stat & (STATUS_CRC_READ_ERR | STATUS_CRC_WRITE_ERR)) - data->error = -EILSEQ; - else if (stat & STATUS_TIME_OUT_READ) - data->error = -ETIMEDOUT; - else - data->error = -EIO; - } else { - data->bytes_xfered = host->dma_size; - } - - data_error = data->error; - - host->data = NULL; - - return data_error; -} - -static int imxmci_cmd_done(struct imxmci_host *host, unsigned int stat) -{ - struct mmc_command *cmd = host->cmd; - int i; - u32 a, b, c; - struct mmc_data *data = host->data; - - if (!cmd) - return 0; - - host->cmd = NULL; - - if (stat & STATUS_TIME_OUT_RESP) { - dev_dbg(mmc_dev(host->mmc), "CMD TIMEOUT\n"); - cmd->error = -ETIMEDOUT; - } else if (stat & STATUS_RESP_CRC_ERR && cmd->flags & MMC_RSP_CRC) { - dev_dbg(mmc_dev(host->mmc), "cmd crc error\n"); - cmd->error = -EILSEQ; - } - - if (cmd->flags & MMC_RSP_PRESENT) { - if (cmd->flags & MMC_RSP_136) { - for (i = 0; i < 4; i++) { - a = readw(host->base + MMC_REG_RES_FIFO); - b = readw(host->base + MMC_REG_RES_FIFO); - cmd->resp[i] = a << 16 | b; - } - } else { - a = readw(host->base + MMC_REG_RES_FIFO); - b = readw(host->base + MMC_REG_RES_FIFO); - c = readw(host->base + MMC_REG_RES_FIFO); - cmd->resp[0] = a << 24 | b << 8 | c >> 8; - } - } - - dev_dbg(mmc_dev(host->mmc), "RESP 0x%08x, 0x%08x, 0x%08x, 0x%08x, error %d\n", - cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3], cmd->error); - - if (data && !cmd->error && !(stat & STATUS_ERR_MASK)) { - if (host->req->data->flags & MMC_DATA_WRITE) { - - /* Wait for FIFO to be empty before starting DMA write */ - - stat = readw(host->base + MMC_REG_STATUS); - if (imxmci_busy_wait_for_status(host, &stat, - STATUS_APPL_BUFF_FE, - 40, "imxmci_cmd_done DMA WR") < 0) { - cmd->error = -EIO; - imxmci_finish_data(host, stat); - if (host->req) - imxmci_finish_request(host, host->req); - dev_warn(mmc_dev(host->mmc), "STATUS = 0x%04x\n", - stat); - return 0; - } - - if (test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)) - imx_dma_enable(host->dma); - } - } else { - struct mmc_request *req; - imxmci_stop_clock(host); - req = host->req; - - if (data) - imxmci_finish_data(host, stat); - - if (req) - imxmci_finish_request(host, req); - else - dev_warn(mmc_dev(host->mmc), "imxmci_cmd_done: no request to finish\n"); - } - - return 1; -} - -static int imxmci_data_done(struct imxmci_host *host, unsigned int stat) -{ - struct mmc_data *data = host->data; - int data_error; - - if (!data) - return 0; - - data_error = imxmci_finish_data(host, stat); - - if (host->req->stop) { - imxmci_stop_clock(host); - imxmci_start_cmd(host, host->req->stop, 0); - } else { - struct mmc_request *req; - req = host->req; - if (req) - imxmci_finish_request(host, req); - else - dev_warn(mmc_dev(host->mmc), "imxmci_data_done: no request to finish\n"); - } - - return 1; -} - -static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat) -{ - int i; - int burst_len; - int trans_done = 0; - unsigned int stat = *pstat; - - if (host->actual_bus_width != MMC_BUS_WIDTH_4) - burst_len = 16; - else - burst_len = 64; - - /* This is unfortunately required */ - dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data running STATUS = 0x%x\n", - stat); - - udelay(20); /* required for clocks < 8MHz*/ - - if (host->dma_dir == DMA_FROM_DEVICE) { - imxmci_busy_wait_for_status(host, &stat, - STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE | - STATUS_TIME_OUT_READ, - 50, "imxmci_cpu_driven_data read"); - - while ((stat & (STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE)) && - !(stat & STATUS_TIME_OUT_READ) && - (host->data_cnt < 512)) { - - udelay(20); /* required for clocks < 8MHz*/ - - for (i = burst_len; i >= 2 ; i -= 2) { - u16 data; - data = readw(host->base + MMC_REG_BUFFER_ACCESS); - udelay(10); /* required for clocks < 8MHz*/ - if (host->data_cnt+2 <= host->dma_size) { - *(host->data_ptr++) = data; - } else { - if (host->data_cnt < host->dma_size) - *(u8 *)(host->data_ptr) = data; - } - host->data_cnt += 2; - } - - stat = readw(host->base + MMC_REG_STATUS); - - dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data read %d burst %d STATUS = 0x%x\n", - host->data_cnt, burst_len, stat); - } - - if ((stat & STATUS_DATA_TRANS_DONE) && (host->data_cnt >= 512)) - trans_done = 1; - - if (host->dma_size & 0x1ff) - stat &= ~STATUS_CRC_READ_ERR; - - if (stat & STATUS_TIME_OUT_READ) { - dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data read timeout STATUS = 0x%x\n", - stat); - trans_done = -1; - } - - } else { - imxmci_busy_wait_for_status(host, &stat, - STATUS_APPL_BUFF_FE, - 20, "imxmci_cpu_driven_data write"); - - while ((stat & STATUS_APPL_BUFF_FE) && - (host->data_cnt < host->dma_size)) { - if (burst_len >= host->dma_size - host->data_cnt) { - burst_len = host->dma_size - host->data_cnt; - host->data_cnt = host->dma_size; - trans_done = 1; - } else { - host->data_cnt += burst_len; - } - - for (i = burst_len; i > 0 ; i -= 2) - writew(*(host->data_ptr++), host->base + MMC_REG_BUFFER_ACCESS); - - stat = readw(host->base + MMC_REG_STATUS); - - dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data write burst %d STATUS = 0x%x\n", - burst_len, stat); - } - } - - *pstat = stat; - - return trans_done; -} - -static void imxmci_dma_irq(int dma, void *devid) -{ - struct imxmci_host *host = devid; - u32 stat = readw(host->base + MMC_REG_STATUS); - - atomic_set(&host->stuck_timeout, 0); - host->status_reg = stat; - set_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events); - tasklet_schedule(&host->tasklet); -} - -static irqreturn_t imxmci_irq(int irq, void *devid) -{ - struct imxmci_host *host = devid; - u32 stat = readw(host->base + MMC_REG_STATUS); - int handled = 1; - - writew(host->imask | INT_MASK_SDIO | INT_MASK_AUTO_CARD_DETECT, - host->base + MMC_REG_INT_MASK); - - atomic_set(&host->stuck_timeout, 0); - host->status_reg = stat; - set_bit(IMXMCI_PEND_IRQ_b, &host->pending_events); - set_bit(IMXMCI_PEND_STARTED_b, &host->pending_events); - tasklet_schedule(&host->tasklet); - - return IRQ_RETVAL(handled); -} - -static void imxmci_tasklet_fnc(unsigned long data) -{ - struct imxmci_host *host = (struct imxmci_host *)data; - u32 stat; - unsigned int data_dir_mask = 0; /* STATUS_WR_CRC_ERROR_CODE_MASK */ - int timeout = 0; - - if (atomic_read(&host->stuck_timeout) > 4) { - char *what; - timeout = 1; - stat = readw(host->base + MMC_REG_STATUS); - host->status_reg = stat; - if (test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) - if (test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)) - what = "RESP+DMA"; - else - what = "RESP"; - else - if (test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)) - if (test_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events)) - what = "DATA"; - else - what = "DMA"; - else - what = "???"; - - dev_err(mmc_dev(host->mmc), - "%s TIMEOUT, hardware stucked STATUS = 0x%04x IMASK = 0x%04x\n", - what, stat, - readw(host->base + MMC_REG_INT_MASK)); - dev_err(mmc_dev(host->mmc), - "CMD_DAT_CONT = 0x%04x, MMC_BLK_LEN = 0x%04x, MMC_NOB = 0x%04x, DMA_CCR = 0x%08x\n", - readw(host->base + MMC_REG_CMD_DAT_CONT), - readw(host->base + MMC_REG_BLK_LEN), - readw(host->base + MMC_REG_NOB), - CCR(host->dma)); - dev_err(mmc_dev(host->mmc), "CMD%d, prevCMD%d, bus %d-bit, dma_size = 0x%x\n", - host->cmd ? host->cmd->opcode : 0, - host->prev_cmd_code, - 1 << host->actual_bus_width, host->dma_size); - } - - if (!host->present || timeout) - host->status_reg = STATUS_TIME_OUT_RESP | STATUS_TIME_OUT_READ | - STATUS_CRC_READ_ERR | STATUS_CRC_WRITE_ERR; - - if (test_bit(IMXMCI_PEND_IRQ_b, &host->pending_events) || timeout) { - clear_bit(IMXMCI_PEND_IRQ_b, &host->pending_events); - - stat = readw(host->base + MMC_REG_STATUS); - /* - * This is not required in theory, but there is chance to miss some flag - * which clears automatically by mask write, FreeScale original code keeps - * stat from IRQ time so do I - */ - stat |= host->status_reg; - - if (test_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events)) - stat &= ~STATUS_CRC_READ_ERR; - - if (test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) { - imxmci_busy_wait_for_status(host, &stat, - STATUS_END_CMD_RESP | STATUS_ERR_MASK, - 20, "imxmci_tasklet_fnc resp (ERRATUM #4)"); - } - - if (stat & (STATUS_END_CMD_RESP | STATUS_ERR_MASK)) { - if (test_and_clear_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) - imxmci_cmd_done(host, stat); - if (host->data && (stat & STATUS_ERR_MASK)) - imxmci_data_done(host, stat); - } - - if (test_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events)) { - stat |= readw(host->base + MMC_REG_STATUS); - if (imxmci_cpu_driven_data(host, &stat)) { - if (test_and_clear_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) - imxmci_cmd_done(host, stat); - atomic_clear_mask(IMXMCI_PEND_IRQ_m|IMXMCI_PEND_CPU_DATA_m, - &host->pending_events); - imxmci_data_done(host, stat); - } - } - } - - if (test_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events) && - !test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) { - - stat = readw(host->base + MMC_REG_STATUS); - /* Same as above */ - stat |= host->status_reg; - - if (host->dma_dir == DMA_TO_DEVICE) - data_dir_mask = STATUS_WRITE_OP_DONE; - else - data_dir_mask = STATUS_DATA_TRANS_DONE; - - if (stat & data_dir_mask) { - clear_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events); - imxmci_data_done(host, stat); - } - } - - if (test_and_clear_bit(IMXMCI_PEND_CARD_XCHG_b, &host->pending_events)) { - - if (host->cmd) - imxmci_cmd_done(host, STATUS_TIME_OUT_RESP); - - if (host->data) - imxmci_data_done(host, STATUS_TIME_OUT_READ | - STATUS_CRC_READ_ERR | STATUS_CRC_WRITE_ERR); - - if (host->req) - imxmci_finish_request(host, host->req); - - mmc_detect_change(host->mmc, msecs_to_jiffies(100)); - - } -} - -static void imxmci_request(struct mmc_host *mmc, struct mmc_request *req) -{ - struct imxmci_host *host = mmc_priv(mmc); - unsigned int cmdat; - - WARN_ON(host->req != NULL); - - host->req = req; - - cmdat = 0; - - if (req->data) { - imxmci_setup_data(host, req->data); - - cmdat |= CMD_DAT_CONT_DATA_ENABLE; - - if (req->data->flags & MMC_DATA_WRITE) - cmdat |= CMD_DAT_CONT_WRITE; - - if (req->data->flags & MMC_DATA_STREAM) - cmdat |= CMD_DAT_CONT_STREAM_BLOCK; - } - - imxmci_start_cmd(host, req->cmd, cmdat); -} - -#define CLK_RATE 19200000 - -static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) -{ - struct imxmci_host *host = mmc_priv(mmc); - int prescaler; - - if (ios->bus_width == MMC_BUS_WIDTH_4) { - host->actual_bus_width = MMC_BUS_WIDTH_4; - imx_gpio_mode(PB11_PF_SD_DAT3); - BLR(host->dma) = 0; /* burst 64 byte read/write */ - } else { - host->actual_bus_width = MMC_BUS_WIDTH_1; - imx_gpio_mode(GPIO_PORTB | GPIO_IN | GPIO_PUEN | 11); - BLR(host->dma) = 16; /* burst 16 byte read/write */ - } - - if (host->power_mode != ios->power_mode) { - switch (ios->power_mode) { - case MMC_POWER_OFF: - break; - case MMC_POWER_UP: - set_bit(IMXMCI_PEND_SET_INIT_b, &host->pending_events); - break; - case MMC_POWER_ON: - break; - } - host->power_mode = ios->power_mode; - } - - if (ios->clock) { - unsigned int clk; - u16 reg; - - /* The prescaler is 5 for PERCLK2 equal to 96MHz - * then 96MHz / 5 = 19.2 MHz - */ - clk = clk_get_rate(host->clk); - prescaler = (clk + (CLK_RATE * 7) / 8) / CLK_RATE; - switch (prescaler) { - case 0: - case 1: prescaler = 0; - break; - case 2: prescaler = 1; - break; - case 3: prescaler = 2; - break; - case 4: prescaler = 4; - break; - default: - case 5: prescaler = 5; - break; - } - - dev_dbg(mmc_dev(host->mmc), "PERCLK2 %d MHz -> prescaler %d\n", - clk, prescaler); - - for (clk = 0; clk < 8; clk++) { - int x; - x = CLK_RATE / (1 << clk); - if (x <= ios->clock) - break; - } - - /* enable controller */ - reg = readw(host->base + MMC_REG_STR_STP_CLK); - writew(reg | STR_STP_CLK_ENABLE, - host->base + MMC_REG_STR_STP_CLK); - - imxmci_stop_clock(host); - writew((prescaler << 3) | clk, host->base + MMC_REG_CLK_RATE); - /* - * Under my understanding, clock should not be started there, because it would - * initiate SDHC sequencer and send last or random command into card - */ - /* imxmci_start_clock(host); */ - - dev_dbg(mmc_dev(host->mmc), - "MMC_CLK_RATE: 0x%08x\n", - readw(host->base + MMC_REG_CLK_RATE)); - } else { - imxmci_stop_clock(host); - } -} - -static int imxmci_get_ro(struct mmc_host *mmc) -{ - struct imxmci_host *host = mmc_priv(mmc); - - if (host->pdata && host->pdata->get_ro) - return !!host->pdata->get_ro(mmc_dev(mmc)); - /* - * Board doesn't support read only detection; let the mmc core - * decide what to do. - */ - return -ENOSYS; -} - - -static const struct mmc_host_ops imxmci_ops = { - .request = imxmci_request, - .set_ios = imxmci_set_ios, - .get_ro = imxmci_get_ro, -}; - -static void imxmci_check_status(unsigned long data) -{ - struct imxmci_host *host = (struct imxmci_host *)data; - - if (host->pdata && host->pdata->card_present && - host->pdata->card_present(mmc_dev(host->mmc)) != host->present) { - host->present ^= 1; - dev_info(mmc_dev(host->mmc), "card %s\n", - host->present ? "inserted" : "removed"); - - set_bit(IMXMCI_PEND_CARD_XCHG_b, &host->pending_events); - tasklet_schedule(&host->tasklet); - } - - if (test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events) || - test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)) { - atomic_inc(&host->stuck_timeout); - if (atomic_read(&host->stuck_timeout) > 4) - tasklet_schedule(&host->tasklet); - } else { - atomic_set(&host->stuck_timeout, 0); - - } - - mod_timer(&host->timer, jiffies + (HZ>>1)); -} - -static int __init imxmci_probe(struct platform_device *pdev) -{ - struct mmc_host *mmc; - struct imxmci_host *host = NULL; - struct resource *r; - int ret = 0, irq; - u16 rev_no; - - printk(KERN_INFO "i.MX mmc driver\n"); - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - irq = platform_get_irq(pdev, 0); - if (!r || irq < 0) - return -ENXIO; - - r = request_mem_region(r->start, resource_size(r), pdev->name); - if (!r) - return -EBUSY; - - mmc = mmc_alloc_host(sizeof(struct imxmci_host), &pdev->dev); - if (!mmc) { - ret = -ENOMEM; - goto out; - } - - mmc->ops = &imxmci_ops; - mmc->f_min = 150000; - mmc->f_max = CLK_RATE/2; - mmc->ocr_avail = MMC_VDD_32_33; - mmc->caps = MMC_CAP_4_BIT_DATA; - - /* MMC core transfer sizes tunable parameters */ - mmc->max_segs = 64; - mmc->max_seg_size = 64*512; /* default PAGE_CACHE_SIZE */ - mmc->max_req_size = 64*512; /* default PAGE_CACHE_SIZE */ - mmc->max_blk_size = 2048; - mmc->max_blk_count = 65535; - - host = mmc_priv(mmc); - host->base = ioremap(r->start, resource_size(r)); - if (!host->base) { - ret = -ENOMEM; - goto out; - } - - host->mmc = mmc; - host->dma_allocated = 0; - host->pdata = pdev->dev.platform_data; - if (!host->pdata) - dev_warn(&pdev->dev, "No platform data provided!\n"); - - spin_lock_init(&host->lock); - host->res = r; - host->irq = irq; - - host->clk = clk_get(&pdev->dev, "perclk2"); - if (IS_ERR(host->clk)) { - ret = PTR_ERR(host->clk); - goto out; - } - clk_enable(host->clk); - - imx_gpio_mode(PB8_PF_SD_DAT0); - imx_gpio_mode(PB9_PF_SD_DAT1); - imx_gpio_mode(PB10_PF_SD_DAT2); - /* Configured as GPIO with pull-up to ensure right MCC card mode */ - /* Switched to PB11_PF_SD_DAT3 if 4 bit bus is configured */ - imx_gpio_mode(GPIO_PORTB | GPIO_IN | GPIO_PUEN | 11); - /* imx_gpio_mode(PB11_PF_SD_DAT3); */ - imx_gpio_mode(PB12_PF_SD_CLK); - imx_gpio_mode(PB13_PF_SD_CMD); - - imxmci_softreset(host); - - rev_no = readw(host->base + MMC_REG_REV_NO); - if (rev_no != 0x390) { - dev_err(mmc_dev(host->mmc), "wrong rev.no. 0x%08x. aborting.\n", - readw(host->base + MMC_REG_REV_NO)); - goto out; - } - - /* recommended in data sheet */ - writew(0x2db4, host->base + MMC_REG_READ_TO); - - host->imask = IMXMCI_INT_MASK_DEFAULT; - writew(host->imask, host->base + MMC_REG_INT_MASK); - - host->dma = imx_dma_request_by_prio(DRIVER_NAME, DMA_PRIO_LOW); - if(host->dma < 0) { - dev_err(mmc_dev(host->mmc), "imx_dma_request_by_prio failed\n"); - ret = -EBUSY; - goto out; - } - host->dma_allocated = 1; - imx_dma_setup_handlers(host->dma, imxmci_dma_irq, NULL, host); - RSSR(host->dma) = DMA_REQ_SDHC; - - tasklet_init(&host->tasklet, imxmci_tasklet_fnc, (unsigned long)host); - host->status_reg=0; - host->pending_events=0; - - ret = request_irq(host->irq, imxmci_irq, 0, DRIVER_NAME, host); - if (ret) - goto out; - - if (host->pdata && host->pdata->card_present) - host->present = host->pdata->card_present(mmc_dev(mmc)); - else /* if there is no way to detect assume that card is present */ - host->present = 1; - - init_timer(&host->timer); - host->timer.data = (unsigned long)host; - host->timer.function = imxmci_check_status; - add_timer(&host->timer); - mod_timer(&host->timer, jiffies + (HZ >> 1)); - - platform_set_drvdata(pdev, mmc); - - mmc_add_host(mmc); - - return 0; - -out: - if (host) { - if (host->dma_allocated) { - imx_dma_free(host->dma); - host->dma_allocated = 0; - } - if (host->clk) { - clk_disable(host->clk); - clk_put(host->clk); - } - if (host->base) - iounmap(host->base); - } - if (mmc) - mmc_free_host(mmc); - release_mem_region(r->start, resource_size(r)); - return ret; -} - -static int __exit imxmci_remove(struct platform_device *pdev) -{ - struct mmc_host *mmc = platform_get_drvdata(pdev); - - platform_set_drvdata(pdev, NULL); - - if (mmc) { - struct imxmci_host *host = mmc_priv(mmc); - - tasklet_disable(&host->tasklet); - - del_timer_sync(&host->timer); - mmc_remove_host(mmc); - - free_irq(host->irq, host); - iounmap(host->base); - if (host->dma_allocated) { - imx_dma_free(host->dma); - host->dma_allocated = 0; - } - - tasklet_kill(&host->tasklet); - - clk_disable(host->clk); - clk_put(host->clk); - - release_mem_region(host->res->start, resource_size(host->res)); - - mmc_free_host(mmc); - } - return 0; -} - -#ifdef CONFIG_PM -static int imxmci_suspend(struct platform_device *dev, pm_message_t state) -{ - struct mmc_host *mmc = platform_get_drvdata(dev); - int ret = 0; - - if (mmc) - ret = mmc_suspend_host(mmc); - - return ret; -} - -static int imxmci_resume(struct platform_device *dev) -{ - struct mmc_host *mmc = platform_get_drvdata(dev); - struct imxmci_host *host; - int ret = 0; - - if (mmc) { - host = mmc_priv(mmc); - if (host) - set_bit(IMXMCI_PEND_SET_INIT_b, &host->pending_events); - ret = mmc_resume_host(mmc); - } - - return ret; -} -#else -#define imxmci_suspend NULL -#define imxmci_resume NULL -#endif /* CONFIG_PM */ - -static struct platform_driver imxmci_driver = { - .remove = __exit_p(imxmci_remove), - .suspend = imxmci_suspend, - .resume = imxmci_resume, - .driver = { - .name = DRIVER_NAME, - .owner = THIS_MODULE, - } -}; - -static int __init imxmci_init(void) -{ - return platform_driver_probe(&imxmci_driver, imxmci_probe); -} - -static void __exit imxmci_exit(void) -{ - platform_driver_unregister(&imxmci_driver); -} - -module_init(imxmci_init); -module_exit(imxmci_exit); - -MODULE_DESCRIPTION("i.MX Multimedia Card Interface Driver"); -MODULE_AUTHOR("Sascha Hauer, Pengutronix"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:imx-mmc"); diff --git a/drivers/mmc/host/imxmmc.h b/drivers/mmc/host/imxmmc.h deleted file mode 100644 index 09d5d4ee3a7..00000000000 --- a/drivers/mmc/host/imxmmc.h +++ /dev/null @@ -1,64 +0,0 @@ -#define MMC_REG_STR_STP_CLK 0x00 -#define MMC_REG_STATUS 0x04 -#define MMC_REG_CLK_RATE 0x08 -#define MMC_REG_CMD_DAT_CONT 0x0C -#define MMC_REG_RES_TO 0x10 -#define MMC_REG_READ_TO 0x14 -#define MMC_REG_BLK_LEN 0x18 -#define MMC_REG_NOB 0x1C -#define MMC_REG_REV_NO 0x20 -#define MMC_REG_INT_MASK 0x24 -#define MMC_REG_CMD 0x28 -#define MMC_REG_ARGH 0x2C -#define MMC_REG_ARGL 0x30 -#define MMC_REG_RES_FIFO 0x34 -#define MMC_REG_BUFFER_ACCESS 0x38 - -#define STR_STP_CLK_IPG_CLK_GATE_DIS (1<<15) -#define STR_STP_CLK_IPG_PERCLK_GATE_DIS (1<<14) -#define STR_STP_CLK_ENDIAN (1<<5) -#define STR_STP_CLK_RESET (1<<3) -#define STR_STP_CLK_ENABLE (1<<2) -#define STR_STP_CLK_START_CLK (1<<1) -#define STR_STP_CLK_STOP_CLK (1<<0) -#define STATUS_CARD_PRESENCE (1<<15) -#define STATUS_SDIO_INT_ACTIVE (1<<14) -#define STATUS_END_CMD_RESP (1<<13) -#define STATUS_WRITE_OP_DONE (1<<12) -#define STATUS_DATA_TRANS_DONE (1<<11) -#define STATUS_WR_CRC_ERROR_CODE_MASK (3<<10) -#define STATUS_CARD_BUS_CLK_RUN (1<<8) -#define STATUS_APPL_BUFF_FF (1<<7) -#define STATUS_APPL_BUFF_FE (1<<6) -#define STATUS_RESP_CRC_ERR (1<<5) -#define STATUS_CRC_READ_ERR (1<<3) -#define STATUS_CRC_WRITE_ERR (1<<2) -#define STATUS_TIME_OUT_RESP (1<<1) -#define STATUS_TIME_OUT_READ (1<<0) -#define STATUS_ERR_MASK 0x2f -#define CLK_RATE_PRESCALER(x) ((x) & 0x7) -#define CLK_RATE_CLK_RATE(x) (((x) & 0x7) << 3) -#define CMD_DAT_CONT_CMD_RESP_LONG_OFF (1<<12) -#define CMD_DAT_CONT_STOP_READWAIT (1<<11) -#define CMD_DAT_CONT_START_READWAIT (1<<10) -#define CMD_DAT_CONT_BUS_WIDTH_1 (0<<8) -#define CMD_DAT_CONT_BUS_WIDTH_4 (2<<8) -#define CMD_DAT_CONT_INIT (1<<7) -#define CMD_DAT_CONT_BUSY (1<<6) -#define CMD_DAT_CONT_STREAM_BLOCK (1<<5) -#define CMD_DAT_CONT_WRITE (1<<4) -#define CMD_DAT_CONT_DATA_ENABLE (1<<3) -#define CMD_DAT_CONT_RESPONSE_FORMAT_R1 (1) -#define CMD_DAT_CONT_RESPONSE_FORMAT_R2 (2) -#define CMD_DAT_CONT_RESPONSE_FORMAT_R3 (3) -#define CMD_DAT_CONT_RESPONSE_FORMAT_R4 (4) -#define CMD_DAT_CONT_RESPONSE_FORMAT_R5 (5) -#define CMD_DAT_CONT_RESPONSE_FORMAT_R6 (6) -#define INT_MASK_AUTO_CARD_DETECT (1<<6) -#define INT_MASK_DAT0_EN (1<<5) -#define INT_MASK_SDIO (1<<4) -#define INT_MASK_BUF_READY (1<<3) -#define INT_MASK_END_CMD_RES (1<<2) -#define INT_MASK_WRITE_OP_DONE (1<<1) -#define INT_MASK_DATA_TRAN (1<<0) -#define INT_ALL (0x7f) diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c index b3a0ab0e4c2..537d6c7a5ae 100644 --- a/drivers/mmc/host/jz4740_mmc.c +++ b/drivers/mmc/host/jz4740_mmc.c @@ -14,6 +14,8 @@ */ #include <linux/mmc/host.h> +#include <linux/mmc/slot-gpio.h> +#include <linux/err.h> #include <linux/io.h> #include <linux/irq.h> #include <linux/interrupt.h> @@ -119,7 +121,6 @@ struct jz4740_mmc_host { int irq; int card_detect_irq; - struct resource *mem; void __iomem *base; struct mmc_request *req; struct mmc_command *cmd; @@ -230,6 +231,14 @@ static void jz4740_mmc_transfer_check_state(struct jz4740_mmc_host *host, host->req->cmd->error = -EIO; data->error = -EIO; } + } else if (status & JZ_MMC_STATUS_READ_ERROR_MASK) { + if (status & (JZ_MMC_STATUS_TIMEOUT_READ)) { + host->req->cmd->error = -ETIMEDOUT; + data->error = -ETIMEDOUT; + } else { + host->req->cmd->error = -EIO; + data->error = -EIO; + } } } @@ -506,10 +515,13 @@ static irqreturn_t jz_mmc_irq_worker(int irq, void *devid) jz4740_mmc_send_command(host, req->stop); - timeout = jz4740_mmc_poll_irq(host, JZ_MMC_IRQ_PRG_DONE); - if (timeout) { - host->state = JZ4740_MMC_STATE_DONE; - break; + if (mmc_resp_type(req->stop) & MMC_RSP_BUSY) { + timeout = jz4740_mmc_poll_irq(host, + JZ_MMC_IRQ_PRG_DONE); + if (timeout) { + host->state = JZ4740_MMC_STATE_DONE; + break; + } } case JZ4740_MMC_STATE_DONE: break; @@ -559,11 +571,6 @@ static irqreturn_t jz_mmc_irq(int irq, void *devid) if (cmd->data) cmd->data->error = -EIO; cmd->error = -EIO; - } else if (status & (JZ_MMC_STATUS_CRC_READ_ERROR | - JZ_MMC_STATUS_CRC_WRITE_ERROR)) { - if (cmd->data) - cmd->data->error = -EIO; - cmd->error = -EIO; } jz4740_mmc_set_irq_enabled(host, irq_reg, false); @@ -625,7 +632,7 @@ static void jz4740_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) gpio_set_value(host->pdata->gpio_power, !host->pdata->power_active_low); host->cmdat |= JZ_MMC_CMDAT_INIT; - clk_enable(host->clk); + clk_prepare_enable(host->clk); break; case MMC_POWER_ON: break; @@ -633,7 +640,7 @@ static void jz4740_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (gpio_is_valid(host->pdata->gpio_power)) gpio_set_value(host->pdata->gpio_power, host->pdata->power_active_low); - clk_disable(host->clk); + clk_disable_unprepare(host->clk); break; } @@ -649,35 +656,6 @@ static void jz4740_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) } } -static int jz4740_mmc_get_ro(struct mmc_host *mmc) -{ - struct jz4740_mmc_host *host = mmc_priv(mmc); - if (!gpio_is_valid(host->pdata->gpio_read_only)) - return -ENOSYS; - - return gpio_get_value(host->pdata->gpio_read_only) ^ - host->pdata->read_only_active_low; -} - -static int jz4740_mmc_get_cd(struct mmc_host *mmc) -{ - struct jz4740_mmc_host *host = mmc_priv(mmc); - if (!gpio_is_valid(host->pdata->gpio_card_detect)) - return -ENOSYS; - - return gpio_get_value(host->pdata->gpio_card_detect) ^ - host->pdata->card_detect_active_low; -} - -static irqreturn_t jz4740_mmc_card_detect_irq(int irq, void *devid) -{ - struct jz4740_mmc_host *host = devid; - - mmc_detect_change(host->mmc, HZ / 2); - - return IRQ_HANDLED; -} - static void jz4740_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) { struct jz4740_mmc_host *host = mmc_priv(mmc); @@ -687,8 +665,8 @@ static void jz4740_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) static const struct mmc_host_ops jz4740_mmc_ops = { .request = jz4740_mmc_request, .set_ios = jz4740_mmc_set_ios, - .get_ro = jz4740_mmc_get_ro, - .get_cd = jz4740_mmc_get_cd, + .get_ro = mmc_gpio_get_ro, + .get_cd = mmc_gpio_get_cd, .enable_sdio_irq = jz4740_mmc_enable_sdio_irq, }; @@ -701,7 +679,7 @@ static const struct jz_gpio_bulk_request jz4740_mmc_pins[] = { JZ_GPIO_BULK_PIN(MSC_DATA3), }; -static int __devinit jz4740_mmc_request_gpio(struct device *dev, int gpio, +static int jz4740_mmc_request_gpio(struct device *dev, int gpio, const char *name, bool output, int value) { int ret; @@ -723,58 +701,34 @@ static int __devinit jz4740_mmc_request_gpio(struct device *dev, int gpio, return 0; } -static int __devinit jz4740_mmc_request_gpios(struct platform_device *pdev) +static int jz4740_mmc_request_gpios(struct mmc_host *mmc, + struct platform_device *pdev) { - int ret; struct jz4740_mmc_platform_data *pdata = pdev->dev.platform_data; + int ret = 0; if (!pdata) return 0; - ret = jz4740_mmc_request_gpio(&pdev->dev, pdata->gpio_card_detect, - "MMC detect change", false, 0); - if (ret) - goto err; - - ret = jz4740_mmc_request_gpio(&pdev->dev, pdata->gpio_read_only, - "MMC read only", false, 0); - if (ret) - goto err_free_gpio_card_detect; - - ret = jz4740_mmc_request_gpio(&pdev->dev, pdata->gpio_power, - "MMC read only", true, pdata->power_active_low); - if (ret) - goto err_free_gpio_read_only; - - return 0; - -err_free_gpio_read_only: - if (gpio_is_valid(pdata->gpio_read_only)) - gpio_free(pdata->gpio_read_only); -err_free_gpio_card_detect: - if (gpio_is_valid(pdata->gpio_card_detect)) - gpio_free(pdata->gpio_card_detect); -err: - return ret; -} - -static int __devinit jz4740_mmc_request_cd_irq(struct platform_device *pdev, - struct jz4740_mmc_host *host) -{ - struct jz4740_mmc_platform_data *pdata = pdev->dev.platform_data; + if (!pdata->card_detect_active_low) + mmc->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH; + if (!pdata->read_only_active_low) + mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; - if (!gpio_is_valid(pdata->gpio_card_detect)) - return 0; + if (gpio_is_valid(pdata->gpio_card_detect)) { + ret = mmc_gpio_request_cd(mmc, pdata->gpio_card_detect, 0); + if (ret) + return ret; + } - host->card_detect_irq = gpio_to_irq(pdata->gpio_card_detect); - if (host->card_detect_irq < 0) { - dev_warn(&pdev->dev, "Failed to get card detect irq\n"); - return 0; + if (gpio_is_valid(pdata->gpio_read_only)) { + ret = mmc_gpio_request_ro(mmc, pdata->gpio_read_only); + if (ret) + return ret; } - return request_irq(host->card_detect_irq, jz4740_mmc_card_detect_irq, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "MMC card detect", host); + return jz4740_mmc_request_gpio(&pdev->dev, pdata->gpio_power, + "MMC read only", true, pdata->power_active_low); } static void jz4740_mmc_free_gpios(struct platform_device *pdev) @@ -786,10 +740,6 @@ static void jz4740_mmc_free_gpios(struct platform_device *pdev) if (gpio_is_valid(pdata->gpio_power)) gpio_free(pdata->gpio_power); - if (gpio_is_valid(pdata->gpio_read_only)) - gpio_free(pdata->gpio_read_only); - if (gpio_is_valid(pdata->gpio_card_detect)) - gpio_free(pdata->gpio_card_detect); } static inline size_t jz4740_mmc_num_pins(struct jz4740_mmc_host *host) @@ -801,12 +751,13 @@ static inline size_t jz4740_mmc_num_pins(struct jz4740_mmc_host *host) return num_pins; } -static int __devinit jz4740_mmc_probe(struct platform_device* pdev) +static int jz4740_mmc_probe(struct platform_device* pdev) { int ret; struct mmc_host *mmc; struct jz4740_mmc_host *host; struct jz4740_mmc_platform_data *pdata; + struct resource *res; pdata = pdev->dev.platform_data; @@ -826,42 +777,27 @@ static int __devinit jz4740_mmc_probe(struct platform_device* pdev) goto err_free_host; } - host->clk = clk_get(&pdev->dev, "mmc"); - if (!host->clk) { - ret = -ENOENT; + host->clk = devm_clk_get(&pdev->dev, "mmc"); + if (IS_ERR(host->clk)) { + ret = PTR_ERR(host->clk); dev_err(&pdev->dev, "Failed to get mmc clock\n"); goto err_free_host; } - host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!host->mem) { - ret = -ENOENT; - dev_err(&pdev->dev, "Failed to get base platform memory\n"); - goto err_clk_put; - } - - host->mem = request_mem_region(host->mem->start, - resource_size(host->mem), pdev->name); - if (!host->mem) { - ret = -EBUSY; - dev_err(&pdev->dev, "Failed to request base memory region\n"); - goto err_clk_put; - } - - host->base = ioremap_nocache(host->mem->start, resource_size(host->mem)); - if (!host->base) { - ret = -EBUSY; - dev_err(&pdev->dev, "Failed to ioremap base memory\n"); - goto err_release_mem_region; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + host->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(host->base)) { + ret = PTR_ERR(host->base); + goto err_free_host; } ret = jz_gpio_bulk_request(jz4740_mmc_pins, jz4740_mmc_num_pins(host)); if (ret) { dev_err(&pdev->dev, "Failed to request mmc pins: %d\n", ret); - goto err_iounmap; + goto err_free_host; } - ret = jz4740_mmc_request_gpios(pdev); + ret = jz4740_mmc_request_gpios(mmc, pdev); if (ret) goto err_gpio_bulk_free; @@ -884,17 +820,11 @@ static int __devinit jz4740_mmc_probe(struct platform_device* pdev) spin_lock_init(&host->lock); host->irq_mask = 0xffff; - ret = jz4740_mmc_request_cd_irq(pdev, host); - if (ret) { - dev_err(&pdev->dev, "Failed to request card detect irq\n"); - goto err_free_gpios; - } - ret = request_threaded_irq(host->irq, jz_mmc_irq, jz_mmc_irq_worker, 0, dev_name(&pdev->dev), host); if (ret) { dev_err(&pdev->dev, "Failed to request irq: %d\n", ret); - goto err_free_card_detect_irq; + goto err_free_gpios; } jz4740_mmc_reset(host); @@ -917,27 +847,17 @@ static int __devinit jz4740_mmc_probe(struct platform_device* pdev) err_free_irq: free_irq(host->irq, host); -err_free_card_detect_irq: - if (host->card_detect_irq >= 0) - free_irq(host->card_detect_irq, host); err_free_gpios: jz4740_mmc_free_gpios(pdev); err_gpio_bulk_free: jz_gpio_bulk_free(jz4740_mmc_pins, jz4740_mmc_num_pins(host)); -err_iounmap: - iounmap(host->base); -err_release_mem_region: - release_mem_region(host->mem->start, resource_size(host->mem)); -err_clk_put: - clk_put(host->clk); err_free_host: - platform_set_drvdata(pdev, NULL); mmc_free_host(mmc); return ret; } -static int __devexit jz4740_mmc_remove(struct platform_device *pdev) +static int jz4740_mmc_remove(struct platform_device *pdev) { struct jz4740_mmc_host *host = platform_get_drvdata(pdev); @@ -948,31 +868,21 @@ static int __devexit jz4740_mmc_remove(struct platform_device *pdev) mmc_remove_host(host->mmc); free_irq(host->irq, host); - if (host->card_detect_irq >= 0) - free_irq(host->card_detect_irq, host); jz4740_mmc_free_gpios(pdev); jz_gpio_bulk_free(jz4740_mmc_pins, jz4740_mmc_num_pins(host)); - iounmap(host->base); - release_mem_region(host->mem->start, resource_size(host->mem)); - - clk_put(host->clk); - - platform_set_drvdata(pdev, NULL); mmc_free_host(host->mmc); return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int jz4740_mmc_suspend(struct device *dev) { struct jz4740_mmc_host *host = dev_get_drvdata(dev); - mmc_suspend_host(host->mmc); - jz_gpio_bulk_suspend(jz4740_mmc_pins, jz4740_mmc_num_pins(host)); return 0; @@ -984,18 +894,11 @@ static int jz4740_mmc_resume(struct device *dev) jz_gpio_bulk_resume(jz4740_mmc_pins, jz4740_mmc_num_pins(host)); - mmc_resume_host(host->mmc); - return 0; } -const struct dev_pm_ops jz4740_mmc_pm_ops = { - .suspend = jz4740_mmc_suspend, - .resume = jz4740_mmc_resume, - .poweroff = jz4740_mmc_suspend, - .restore = jz4740_mmc_resume, -}; - +static SIMPLE_DEV_PM_OPS(jz4740_mmc_pm_ops, jz4740_mmc_suspend, + jz4740_mmc_resume); #define JZ4740_MMC_PM_OPS (&jz4740_mmc_pm_ops) #else #define JZ4740_MMC_PM_OPS NULL @@ -1003,7 +906,7 @@ const struct dev_pm_ops jz4740_mmc_pm_ops = { static struct platform_driver jz4740_mmc_driver = { .probe = jz4740_mmc_probe, - .remove = __devexit_p(jz4740_mmc_remove), + .remove = jz4740_mmc_remove, .driver = { .name = "jz4740-mmc", .owner = THIS_MODULE, @@ -1011,17 +914,7 @@ static struct platform_driver jz4740_mmc_driver = { }, }; -static int __init jz4740_mmc_init(void) -{ - return platform_driver_register(&jz4740_mmc_driver); -} -module_init(jz4740_mmc_init); - -static void __exit jz4740_mmc_exit(void) -{ - platform_driver_unregister(&jz4740_mmc_driver); -} -module_exit(jz4740_mmc_exit); +module_platform_driver(jz4740_mmc_driver); MODULE_DESCRIPTION("JZ4740 SD/MMC controller driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index fd877f633dd..cc8d4a6099c 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -27,6 +27,7 @@ #include <linux/sched.h> #include <linux/delay.h> #include <linux/slab.h> +#include <linux/module.h> #include <linux/bio.h> #include <linux/dma-mapping.h> #include <linux/crc7.h> @@ -35,6 +36,7 @@ #include <linux/mmc/host.h> #include <linux/mmc/mmc.h> /* for R1_SPI_* bit values */ +#include <linux/mmc/slot-gpio.h> #include <linux/spi/spi.h> #include <linux/spi/mmc_spi.h> @@ -99,7 +101,7 @@ #define r1b_timeout (HZ * 3) /* One of the critical speed parameters is the amount of data which may - * be transfered in one command. If this value is too low, the SD card + * be transferred in one command. If this value is too low, the SD card * controller has to do multiple partial block writes (argggh!). With * today (2008) SD cards there is little speed gain if we transfer more * than 64 KBytes at a time. So use this value until there is any indication @@ -446,7 +448,6 @@ mmc_spi_command_send(struct mmc_spi_host *host, { struct scratch *data = host->data; u8 *cp = data->status; - u32 arg = cmd->arg; int status; struct spi_transfer *t; @@ -463,14 +464,12 @@ mmc_spi_command_send(struct mmc_spi_host *host, * We init the whole buffer to all-ones, which is what we need * to write while we're reading (later) response data. */ - memset(cp++, 0xff, sizeof(data->status)); + memset(cp, 0xff, sizeof(data->status)); - *cp++ = 0x40 | cmd->opcode; - *cp++ = (u8)(arg >> 24); - *cp++ = (u8)(arg >> 16); - *cp++ = (u8)(arg >> 8); - *cp++ = (u8)arg; - *cp++ = (crc7(0, &data->status[1], 5) << 1) | 0x01; + cp[1] = 0x40 | cmd->opcode; + put_unaligned_be32(cmd->arg, cp+2); + cp[6] = crc7_be(0, cp+1, 5) | 0x01; + cp += 7; /* Then, read up to 13 bytes (while writing all-ones): * - N(CR) (== 1..8) bytes of all-ones @@ -709,10 +708,7 @@ mmc_spi_writeblock(struct mmc_spi_host *host, struct spi_transfer *t, * so we have to cope with this situation and check the response * bit-by-bit. Arggh!!! */ - pattern = scratch->status[0] << 24; - pattern |= scratch->status[1] << 16; - pattern |= scratch->status[2] << 8; - pattern |= scratch->status[3]; + pattern = get_unaligned_be32(scratch->status); /* First 3 bit of pattern are undefined */ pattern |= 0xE0000000; @@ -1271,33 +1267,11 @@ static void mmc_spi_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) } } -static int mmc_spi_get_ro(struct mmc_host *mmc) -{ - struct mmc_spi_host *host = mmc_priv(mmc); - - if (host->pdata && host->pdata->get_ro) - return !!host->pdata->get_ro(mmc->parent); - /* - * Board doesn't support read only detection; let the mmc core - * decide what to do. - */ - return -ENOSYS; -} - -static int mmc_spi_get_cd(struct mmc_host *mmc) -{ - struct mmc_spi_host *host = mmc_priv(mmc); - - if (host->pdata && host->pdata->get_cd) - return !!host->pdata->get_cd(mmc->parent); - return -ENOSYS; -} - static const struct mmc_host_ops mmc_spi_ops = { .request = mmc_spi_request, .set_ios = mmc_spi_set_ios, - .get_ro = mmc_spi_get_ro, - .get_cd = mmc_spi_get_cd, + .get_ro = mmc_gpio_get_ro, + .get_cd = mmc_gpio_get_cd, }; @@ -1323,6 +1297,7 @@ static int mmc_spi_probe(struct spi_device *spi) struct mmc_host *mmc; struct mmc_spi_host *host; int status; + bool has_ro = false; /* We rely on full duplex transfers, mostly to reduce * per-transfer overheads (by making fewer transfers). @@ -1447,18 +1422,33 @@ static int mmc_spi_probe(struct spi_device *spi) } /* pass platform capabilities, if any */ - if (host->pdata) + if (host->pdata) { mmc->caps |= host->pdata->caps; + mmc->caps2 |= host->pdata->caps2; + } status = mmc_add_host(mmc); if (status != 0) goto fail_add_host; + if (host->pdata && host->pdata->flags & MMC_SPI_USE_CD_GPIO) { + status = mmc_gpio_request_cd(mmc, host->pdata->cd_gpio, + host->pdata->cd_debounce); + if (status != 0) + goto fail_add_host; + } + + if (host->pdata && host->pdata->flags & MMC_SPI_USE_RO_GPIO) { + has_ro = true; + status = mmc_gpio_request_ro(mmc, host->pdata->ro_gpio); + if (status != 0) + goto fail_add_host; + } + dev_info(&spi->dev, "SD/MMC host %s%s%s%s%s\n", dev_name(&mmc->class_dev), host->dma_dev ? "" : ", no DMA", - (host->pdata && host->pdata->get_ro) - ? "" : ", no WP", + has_ro ? "" : ", no WP", (host->pdata && host->pdata->setpower) ? "" : ", no poweroff", (mmc->caps & MMC_CAP_NEEDS_POLL) @@ -1484,7 +1474,7 @@ nomem: } -static int __devexit mmc_spi_remove(struct spi_device *spi) +static int mmc_spi_remove(struct spi_device *spi) { struct mmc_host *mmc = dev_get_drvdata(&spi->dev); struct mmc_spi_host *host; @@ -1516,40 +1506,22 @@ static int __devexit mmc_spi_remove(struct spi_device *spi) return 0; } -#if defined(CONFIG_OF) -static struct of_device_id mmc_spi_of_match_table[] __devinitdata = { +static struct of_device_id mmc_spi_of_match_table[] = { { .compatible = "mmc-spi-slot", }, {}, }; -#endif static struct spi_driver mmc_spi_driver = { .driver = { .name = "mmc_spi", - .bus = &spi_bus_type, .owner = THIS_MODULE, -#if defined(CONFIG_OF) .of_match_table = mmc_spi_of_match_table, -#endif }, .probe = mmc_spi_probe, - .remove = __devexit_p(mmc_spi_remove), + .remove = mmc_spi_remove, }; - -static int __init mmc_spi_init(void) -{ - return spi_register_driver(&mmc_spi_driver); -} -module_init(mmc_spi_init); - - -static void __exit mmc_spi_exit(void) -{ - spi_unregister_driver(&mmc_spi_driver); -} -module_exit(mmc_spi_exit); - +module_spi_driver(mmc_spi_driver); MODULE_AUTHOR("Mike Lavender, David Brownell, " "Hans-Peter Nilsson, Jan Nikitenko"); diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 87b4fc6c98c..7ad463e9741 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -2,7 +2,7 @@ * linux/drivers/mmc/host/mmci.c - ARM PrimeCell MMCI PL180/1 driver * * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. - * Copyright (C) 2010 ST-Ericsson AB. + * Copyright (C) 2010 ST-Ericsson SA * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -13,18 +13,30 @@ #include <linux/init.h> #include <linux/ioport.h> #include <linux/device.h> +#include <linux/io.h> #include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/slab.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/highmem.h> #include <linux/log2.h> +#include <linux/mmc/pm.h> #include <linux/mmc/host.h> +#include <linux/mmc/card.h> +#include <linux/mmc/slot-gpio.h> #include <linux/amba/bus.h> #include <linux/clk.h> #include <linux/scatterlist.h> #include <linux/gpio.h> -#include <linux/amba/mmci.h> +#include <linux/of_gpio.h> #include <linux/regulator/consumer.h> +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> +#include <linux/amba/mmci.h> +#include <linux/pm_runtime.h> +#include <linux/types.h> +#include <linux/pinctrl/consumer.h> #include <asm/div64.h> #include <asm/io.h> @@ -45,6 +57,14 @@ static unsigned int fmax = 515633; * is asserted (likewise for RX) * @fifohalfsize: number of bytes that can be written when MCI_TXFIFOHALFEMPTY * is asserted (likewise for RX) + * @sdio: variant supports SDIO + * @st_clkdiv: true if using a ST-specific clock divider algorithm + * @blksz_datactrl16: true if Block size is at b16..b30 position in datactrl register + * @pwrreg_powerup: power up value for MMCIPOWER register + * @signal_direction: input/out direction of bus signals can be indicated + * @pwrreg_clkgate: MMCIPOWER register must be used to gate the clock + * @busy_detect: true if busy detection on dat0 is supported + * @pwrreg_nopower: bits in MMCIPOWER don't controls ext. power supply */ struct variant_data { unsigned int clkreg; @@ -52,28 +72,182 @@ struct variant_data { unsigned int datalength_bits; unsigned int fifosize; unsigned int fifohalfsize; + bool sdio; + bool st_clkdiv; + bool blksz_datactrl16; + u32 pwrreg_powerup; + bool signal_direction; + bool pwrreg_clkgate; + bool busy_detect; + bool pwrreg_nopower; }; static struct variant_data variant_arm = { .fifosize = 16 * 4, .fifohalfsize = 8 * 4, .datalength_bits = 16, + .pwrreg_powerup = MCI_PWR_UP, +}; + +static struct variant_data variant_arm_extended_fifo = { + .fifosize = 128 * 4, + .fifohalfsize = 64 * 4, + .datalength_bits = 16, + .pwrreg_powerup = MCI_PWR_UP, +}; + +static struct variant_data variant_arm_extended_fifo_hwfc = { + .fifosize = 128 * 4, + .fifohalfsize = 64 * 4, + .clkreg_enable = MCI_ARM_HWFCEN, + .datalength_bits = 16, + .pwrreg_powerup = MCI_PWR_UP, }; static struct variant_data variant_u300 = { .fifosize = 16 * 4, .fifohalfsize = 8 * 4, - .clkreg_enable = 1 << 13, /* HWFCEN */ + .clkreg_enable = MCI_ST_U300_HWFCEN, .datalength_bits = 16, + .sdio = true, + .pwrreg_powerup = MCI_PWR_ON, + .signal_direction = true, + .pwrreg_clkgate = true, + .pwrreg_nopower = true, +}; + +static struct variant_data variant_nomadik = { + .fifosize = 16 * 4, + .fifohalfsize = 8 * 4, + .clkreg = MCI_CLK_ENABLE, + .datalength_bits = 24, + .sdio = true, + .st_clkdiv = true, + .pwrreg_powerup = MCI_PWR_ON, + .signal_direction = true, + .pwrreg_clkgate = true, + .pwrreg_nopower = true, }; static struct variant_data variant_ux500 = { .fifosize = 30 * 4, .fifohalfsize = 8 * 4, .clkreg = MCI_CLK_ENABLE, - .clkreg_enable = 1 << 14, /* HWFCEN */ + .clkreg_enable = MCI_ST_UX500_HWFCEN, .datalength_bits = 24, + .sdio = true, + .st_clkdiv = true, + .pwrreg_powerup = MCI_PWR_ON, + .signal_direction = true, + .pwrreg_clkgate = true, + .busy_detect = true, + .pwrreg_nopower = true, }; + +static struct variant_data variant_ux500v2 = { + .fifosize = 30 * 4, + .fifohalfsize = 8 * 4, + .clkreg = MCI_CLK_ENABLE, + .clkreg_enable = MCI_ST_UX500_HWFCEN, + .datalength_bits = 24, + .sdio = true, + .st_clkdiv = true, + .blksz_datactrl16 = true, + .pwrreg_powerup = MCI_PWR_ON, + .signal_direction = true, + .pwrreg_clkgate = true, + .busy_detect = true, + .pwrreg_nopower = true, +}; + +static int mmci_card_busy(struct mmc_host *mmc) +{ + struct mmci_host *host = mmc_priv(mmc); + unsigned long flags; + int busy = 0; + + pm_runtime_get_sync(mmc_dev(mmc)); + + spin_lock_irqsave(&host->lock, flags); + if (readl(host->base + MMCISTATUS) & MCI_ST_CARDBUSY) + busy = 1; + spin_unlock_irqrestore(&host->lock, flags); + + pm_runtime_mark_last_busy(mmc_dev(mmc)); + pm_runtime_put_autosuspend(mmc_dev(mmc)); + + return busy; +} + +/* + * Validate mmc prerequisites + */ +static int mmci_validate_data(struct mmci_host *host, + struct mmc_data *data) +{ + if (!data) + return 0; + + if (!is_power_of_2(data->blksz)) { + dev_err(mmc_dev(host->mmc), + "unsupported block size (%d bytes)\n", data->blksz); + return -EINVAL; + } + + return 0; +} + +static void mmci_reg_delay(struct mmci_host *host) +{ + /* + * According to the spec, at least three feedback clock cycles + * of max 52 MHz must pass between two writes to the MMCICLOCK reg. + * Three MCLK clock cycles must pass between two MMCIPOWER reg writes. + * Worst delay time during card init is at 100 kHz => 30 us. + * Worst delay time when up and running is at 25 MHz => 120 ns. + */ + if (host->cclk < 25000000) + udelay(30); + else + ndelay(120); +} + +/* + * This must be called with host->lock held + */ +static void mmci_write_clkreg(struct mmci_host *host, u32 clk) +{ + if (host->clk_reg != clk) { + host->clk_reg = clk; + writel(clk, host->base + MMCICLOCK); + } +} + +/* + * This must be called with host->lock held + */ +static void mmci_write_pwrreg(struct mmci_host *host, u32 pwr) +{ + if (host->pwr_reg != pwr) { + host->pwr_reg = pwr; + writel(pwr, host->base + MMCIPOWER); + } +} + +/* + * This must be called with host->lock held + */ +static void mmci_write_datactrlreg(struct mmci_host *host, u32 datactrl) +{ + /* Keep ST Micro busy mode if enabled */ + datactrl |= host->datactrl_reg & MCI_ST_DPSM_BUSYMODE; + + if (host->datactrl_reg != datactrl) { + host->datactrl_reg = datactrl; + writel(datactrl, host->base + MMCIDATACTRL); + } +} + /* * This must be called with host->lock held */ @@ -82,11 +256,31 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired) struct variant_data *variant = host->variant; u32 clk = variant->clkreg; + /* Make sure cclk reflects the current calculated clock */ + host->cclk = 0; + if (desired) { if (desired >= host->mclk) { clk = MCI_CLK_BYPASS; + if (variant->st_clkdiv) + clk |= MCI_ST_UX500_NEG_EDGE; host->cclk = host->mclk; + } else if (variant->st_clkdiv) { + /* + * DB8500 TRM says f = mclk / (clkdiv + 2) + * => clkdiv = (mclk / f) - 2 + * Round the divider up so we don't exceed the max + * frequency + */ + clk = DIV_ROUND_UP(host->mclk, desired) - 2; + if (clk >= 256) + clk = 255; + host->cclk = host->mclk / (clk + 2); } else { + /* + * PL180 TRM says f = mclk / (2 * (clkdiv + 1)) + * => clkdiv = mclk / (2 * f) - 1 + */ clk = host->mclk / (2 * desired) - 1; if (clk >= 256) clk = 255; @@ -99,12 +293,19 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired) /* clk |= MCI_CLK_PWRSAVE; */ } + /* Set actual clock for debug */ + host->mmc->actual_clock = host->cclk; + if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) clk |= MCI_4BIT_BUS; if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_8) clk |= MCI_ST_8BIT_BUS; - writel(clk, host->base + MMCICLOCK); + if (host->mmc->ios.timing == MMC_TIMING_UHS_DDR50 || + host->mmc->ios.timing == MMC_TIMING_MMC_DDR52) + clk |= MCI_ST_UX500_NEG_EDGE; + + mmci_write_clkreg(host, clk); } static void @@ -117,22 +318,32 @@ mmci_request_end(struct mmci_host *host, struct mmc_request *mrq) host->mrq = NULL; host->cmd = NULL; - if (mrq->data) - mrq->data->bytes_xfered = host->data_xfered; - - /* - * Need to drop the host lock here; mmc_request_done may call - * back into the driver... - */ - spin_unlock(&host->lock); mmc_request_done(host->mmc, mrq); - spin_lock(&host->lock); + + pm_runtime_mark_last_busy(mmc_dev(host->mmc)); + pm_runtime_put_autosuspend(mmc_dev(host->mmc)); +} + +static void mmci_set_mask1(struct mmci_host *host, unsigned int mask) +{ + void __iomem *base = host->base; + + if (host->singleirq) { + unsigned int mask0 = readl(base + MMCIMASK0); + + mask0 &= ~MCI_IRQ1MASK; + mask0 |= mask; + + writel(mask0, base + MMCIMASK0); + } + + writel(mask, base + MMCIMASK1); } static void mmci_stop_data(struct mmci_host *host) { - writel(0, host->base + MMCIDATACTRL); - writel(0, host->base + MMCIMASK1); + mmci_write_datactrlreg(host, 0); + mmci_set_mask1(host, 0); host->data = NULL; } @@ -148,6 +359,350 @@ static void mmci_init_sg(struct mmci_host *host, struct mmc_data *data) sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags); } +/* + * All the DMA operation mode stuff goes inside this ifdef. + * This assumes that you have a generic DMA device interface, + * no custom DMA interfaces are supported. + */ +#ifdef CONFIG_DMA_ENGINE +static void mmci_dma_setup(struct mmci_host *host) +{ + const char *rxname, *txname; + dma_cap_mask_t mask; + + host->dma_rx_channel = dma_request_slave_channel(mmc_dev(host->mmc), "rx"); + host->dma_tx_channel = dma_request_slave_channel(mmc_dev(host->mmc), "tx"); + + /* initialize pre request cookie */ + host->next_data.cookie = 1; + + /* Try to acquire a generic DMA engine slave channel */ + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + /* + * If only an RX channel is specified, the driver will + * attempt to use it bidirectionally, however if it is + * is specified but cannot be located, DMA will be disabled. + */ + if (host->dma_rx_channel && !host->dma_tx_channel) + host->dma_tx_channel = host->dma_rx_channel; + + if (host->dma_rx_channel) + rxname = dma_chan_name(host->dma_rx_channel); + else + rxname = "none"; + + if (host->dma_tx_channel) + txname = dma_chan_name(host->dma_tx_channel); + else + txname = "none"; + + dev_info(mmc_dev(host->mmc), "DMA channels RX %s, TX %s\n", + rxname, txname); + + /* + * Limit the maximum segment size in any SG entry according to + * the parameters of the DMA engine device. + */ + if (host->dma_tx_channel) { + struct device *dev = host->dma_tx_channel->device->dev; + unsigned int max_seg_size = dma_get_max_seg_size(dev); + + if (max_seg_size < host->mmc->max_seg_size) + host->mmc->max_seg_size = max_seg_size; + } + if (host->dma_rx_channel) { + struct device *dev = host->dma_rx_channel->device->dev; + unsigned int max_seg_size = dma_get_max_seg_size(dev); + + if (max_seg_size < host->mmc->max_seg_size) + host->mmc->max_seg_size = max_seg_size; + } +} + +/* + * This is used in or so inline it + * so it can be discarded. + */ +static inline void mmci_dma_release(struct mmci_host *host) +{ + if (host->dma_rx_channel) + dma_release_channel(host->dma_rx_channel); + if (host->dma_tx_channel) + dma_release_channel(host->dma_tx_channel); + host->dma_rx_channel = host->dma_tx_channel = NULL; +} + +static void mmci_dma_data_error(struct mmci_host *host) +{ + dev_err(mmc_dev(host->mmc), "error during DMA transfer!\n"); + dmaengine_terminate_all(host->dma_current); + host->dma_current = NULL; + host->dma_desc_current = NULL; + host->data->host_cookie = 0; +} + +static void mmci_dma_unmap(struct mmci_host *host, struct mmc_data *data) +{ + struct dma_chan *chan; + enum dma_data_direction dir; + + if (data->flags & MMC_DATA_READ) { + dir = DMA_FROM_DEVICE; + chan = host->dma_rx_channel; + } else { + dir = DMA_TO_DEVICE; + chan = host->dma_tx_channel; + } + + dma_unmap_sg(chan->device->dev, data->sg, data->sg_len, dir); +} + +static void mmci_dma_finalize(struct mmci_host *host, struct mmc_data *data) +{ + u32 status; + int i; + + /* Wait up to 1ms for the DMA to complete */ + for (i = 0; ; i++) { + status = readl(host->base + MMCISTATUS); + if (!(status & MCI_RXDATAAVLBLMASK) || i >= 100) + break; + udelay(10); + } + + /* + * Check to see whether we still have some data left in the FIFO - + * this catches DMA controllers which are unable to monitor the + * DMALBREQ and DMALSREQ signals while allowing us to DMA to non- + * contiguous buffers. On TX, we'll get a FIFO underrun error. + */ + if (status & MCI_RXDATAAVLBLMASK) { + mmci_dma_data_error(host); + if (!data->error) + data->error = -EIO; + } + + if (!data->host_cookie) + mmci_dma_unmap(host, data); + + /* + * Use of DMA with scatter-gather is impossible. + * Give up with DMA and switch back to PIO mode. + */ + if (status & MCI_RXDATAAVLBLMASK) { + dev_err(mmc_dev(host->mmc), "buggy DMA detected. Taking evasive action.\n"); + mmci_dma_release(host); + } + + host->dma_current = NULL; + host->dma_desc_current = NULL; +} + +/* prepares DMA channel and DMA descriptor, returns non-zero on failure */ +static int __mmci_dma_prep_data(struct mmci_host *host, struct mmc_data *data, + struct dma_chan **dma_chan, + struct dma_async_tx_descriptor **dma_desc) +{ + struct variant_data *variant = host->variant; + struct dma_slave_config conf = { + .src_addr = host->phybase + MMCIFIFO, + .dst_addr = host->phybase + MMCIFIFO, + .src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .src_maxburst = variant->fifohalfsize >> 2, /* # of words */ + .dst_maxburst = variant->fifohalfsize >> 2, /* # of words */ + .device_fc = false, + }; + struct dma_chan *chan; + struct dma_device *device; + struct dma_async_tx_descriptor *desc; + enum dma_data_direction buffer_dirn; + int nr_sg; + + if (data->flags & MMC_DATA_READ) { + conf.direction = DMA_DEV_TO_MEM; + buffer_dirn = DMA_FROM_DEVICE; + chan = host->dma_rx_channel; + } else { + conf.direction = DMA_MEM_TO_DEV; + buffer_dirn = DMA_TO_DEVICE; + chan = host->dma_tx_channel; + } + + /* If there's no DMA channel, fall back to PIO */ + if (!chan) + return -EINVAL; + + /* If less than or equal to the fifo size, don't bother with DMA */ + if (data->blksz * data->blocks <= variant->fifosize) + return -EINVAL; + + device = chan->device; + nr_sg = dma_map_sg(device->dev, data->sg, data->sg_len, buffer_dirn); + if (nr_sg == 0) + return -EINVAL; + + dmaengine_slave_config(chan, &conf); + desc = dmaengine_prep_slave_sg(chan, data->sg, nr_sg, + conf.direction, DMA_CTRL_ACK); + if (!desc) + goto unmap_exit; + + *dma_chan = chan; + *dma_desc = desc; + + return 0; + + unmap_exit: + dma_unmap_sg(device->dev, data->sg, data->sg_len, buffer_dirn); + return -ENOMEM; +} + +static inline int mmci_dma_prep_data(struct mmci_host *host, + struct mmc_data *data) +{ + /* Check if next job is already prepared. */ + if (host->dma_current && host->dma_desc_current) + return 0; + + /* No job were prepared thus do it now. */ + return __mmci_dma_prep_data(host, data, &host->dma_current, + &host->dma_desc_current); +} + +static inline int mmci_dma_prep_next(struct mmci_host *host, + struct mmc_data *data) +{ + struct mmci_host_next *nd = &host->next_data; + return __mmci_dma_prep_data(host, data, &nd->dma_chan, &nd->dma_desc); +} + +static int mmci_dma_start_data(struct mmci_host *host, unsigned int datactrl) +{ + int ret; + struct mmc_data *data = host->data; + + ret = mmci_dma_prep_data(host, host->data); + if (ret) + return ret; + + /* Okay, go for it. */ + dev_vdbg(mmc_dev(host->mmc), + "Submit MMCI DMA job, sglen %d blksz %04x blks %04x flags %08x\n", + data->sg_len, data->blksz, data->blocks, data->flags); + dmaengine_submit(host->dma_desc_current); + dma_async_issue_pending(host->dma_current); + + datactrl |= MCI_DPSM_DMAENABLE; + + /* Trigger the DMA transfer */ + mmci_write_datactrlreg(host, datactrl); + + /* + * Let the MMCI say when the data is ended and it's time + * to fire next DMA request. When that happens, MMCI will + * call mmci_data_end() + */ + writel(readl(host->base + MMCIMASK0) | MCI_DATAENDMASK, + host->base + MMCIMASK0); + return 0; +} + +static void mmci_get_next_data(struct mmci_host *host, struct mmc_data *data) +{ + struct mmci_host_next *next = &host->next_data; + + WARN_ON(data->host_cookie && data->host_cookie != next->cookie); + WARN_ON(!data->host_cookie && (next->dma_desc || next->dma_chan)); + + host->dma_desc_current = next->dma_desc; + host->dma_current = next->dma_chan; + next->dma_desc = NULL; + next->dma_chan = NULL; +} + +static void mmci_pre_request(struct mmc_host *mmc, struct mmc_request *mrq, + bool is_first_req) +{ + struct mmci_host *host = mmc_priv(mmc); + struct mmc_data *data = mrq->data; + struct mmci_host_next *nd = &host->next_data; + + if (!data) + return; + + BUG_ON(data->host_cookie); + + if (mmci_validate_data(host, data)) + return; + + if (!mmci_dma_prep_next(host, data)) + data->host_cookie = ++nd->cookie < 0 ? 1 : nd->cookie; +} + +static void mmci_post_request(struct mmc_host *mmc, struct mmc_request *mrq, + int err) +{ + struct mmci_host *host = mmc_priv(mmc); + struct mmc_data *data = mrq->data; + + if (!data || !data->host_cookie) + return; + + mmci_dma_unmap(host, data); + + if (err) { + struct mmci_host_next *next = &host->next_data; + struct dma_chan *chan; + if (data->flags & MMC_DATA_READ) + chan = host->dma_rx_channel; + else + chan = host->dma_tx_channel; + dmaengine_terminate_all(chan); + + next->dma_desc = NULL; + next->dma_chan = NULL; + } +} + +#else +/* Blank functions if the DMA engine is not available */ +static void mmci_get_next_data(struct mmci_host *host, struct mmc_data *data) +{ +} +static inline void mmci_dma_setup(struct mmci_host *host) +{ +} + +static inline void mmci_dma_release(struct mmci_host *host) +{ +} + +static inline void mmci_dma_unmap(struct mmci_host *host, struct mmc_data *data) +{ +} + +static inline void mmci_dma_finalize(struct mmci_host *host, + struct mmc_data *data) +{ +} + +static inline void mmci_dma_data_error(struct mmci_host *host) +{ +} + +static inline int mmci_dma_start_data(struct mmci_host *host, unsigned int datactrl) +{ + return -ENOSYS; +} + +#define mmci_pre_request NULL +#define mmci_post_request NULL + +#endif + static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) { struct variant_data *variant = host->variant; @@ -161,9 +716,7 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) host->data = data; host->size = data->blksz * data->blocks; - host->data_xfered = 0; - - mmci_init_sg(host, data); + data->bytes_xfered = 0; clks = (unsigned long long)data->timeout_ns * host->cclk; do_div(clks, 1000000000UL); @@ -177,16 +730,64 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) blksz_bits = ffs(data->blksz) - 1; BUG_ON(1 << blksz_bits != data->blksz); - datactrl = MCI_DPSM_ENABLE | blksz_bits << 4; - if (data->flags & MMC_DATA_READ) { + if (variant->blksz_datactrl16) + datactrl = MCI_DPSM_ENABLE | (data->blksz << 16); + else + datactrl = MCI_DPSM_ENABLE | blksz_bits << 4; + + if (data->flags & MMC_DATA_READ) datactrl |= MCI_DPSM_DIRECTION; + + /* The ST Micro variants has a special bit to enable SDIO */ + if (variant->sdio && host->mmc->card) + if (mmc_card_sdio(host->mmc->card)) { + /* + * The ST Micro variants has a special bit + * to enable SDIO. + */ + u32 clk; + + datactrl |= MCI_ST_DPSM_SDIOEN; + + /* + * The ST Micro variant for SDIO small write transfers + * needs to have clock H/W flow control disabled, + * otherwise the transfer will not start. The threshold + * depends on the rate of MCLK. + */ + if (data->flags & MMC_DATA_WRITE && + (host->size < 8 || + (host->size <= 8 && host->mclk > 50000000))) + clk = host->clk_reg & ~variant->clkreg_enable; + else + clk = host->clk_reg | variant->clkreg_enable; + + mmci_write_clkreg(host, clk); + } + + if (host->mmc->ios.timing == MMC_TIMING_UHS_DDR50 || + host->mmc->ios.timing == MMC_TIMING_MMC_DDR52) + datactrl |= MCI_ST_DPSM_DDRMODE; + + /* + * Attempt to use DMA operation mode, if this + * should fail, fall back to PIO mode + */ + if (!mmci_dma_start_data(host, datactrl)) + return; + + /* IRQ mode, map the SG list for CPU reading/writing */ + mmci_init_sg(host, data); + + if (data->flags & MMC_DATA_READ) { irqmask = MCI_RXFIFOHALFFULLMASK; /* - * If we have less than a FIFOSIZE of bytes to transfer, - * trigger a PIO interrupt as soon as any data is available. + * If we have less than the fifo 'half-full' threshold to + * transfer, trigger a PIO interrupt as soon as any data + * is available. */ - if (host->size < variant->fifosize) + if (host->size < variant->fifohalfsize) irqmask |= MCI_RXDATAAVLBLMASK; } else { /* @@ -196,9 +797,9 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) irqmask = MCI_TXFIFOHALFEMPTYMASK; } - writel(datactrl, base + MMCIDATACTRL); + mmci_write_datactrlreg(host, datactrl); writel(readl(base + MMCIMASK0) & ~MCI_DATAENDMASK, base + MMCIMASK0); - writel(irqmask, base + MMCIMASK1); + mmci_set_mask1(host, irqmask); } static void @@ -233,50 +834,62 @@ static void mmci_data_irq(struct mmci_host *host, struct mmc_data *data, unsigned int status) { - if (status & MCI_DATABLOCKEND) { - host->data_xfered += data->blksz; -#ifdef CONFIG_ARCH_U300 + /* First check for errors */ + if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_STARTBITERR| + MCI_TXUNDERRUN|MCI_RXOVERRUN)) { + u32 remain, success; + + /* Terminate the DMA transfer */ + if (dma_inprogress(host)) { + mmci_dma_data_error(host); + mmci_dma_unmap(host, data); + } + /* - * On the U300 some signal or other is - * badly routed so that a data write does - * not properly terminate with a MCI_DATAEND - * status flag. This quirk will make writes - * work again. + * Calculate how far we are into the transfer. Note that + * the data counter gives the number of bytes transferred + * on the MMC bus, not on the host side. On reads, this + * can be as much as a FIFO-worth of data ahead. This + * matters for FIFO overruns only. */ - if (data->flags & MMC_DATA_WRITE) - status |= MCI_DATAEND; -#endif - } - if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|MCI_RXOVERRUN)) { - dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ (status %08x)\n", status); - if (status & MCI_DATACRCFAIL) + remain = readl(host->base + MMCIDATACNT); + success = data->blksz * data->blocks - remain; + + dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ, status 0x%08x at 0x%08x\n", + status, success); + if (status & MCI_DATACRCFAIL) { + /* Last block was not successful */ + success -= 1; data->error = -EILSEQ; - else if (status & MCI_DATATIMEOUT) + } else if (status & MCI_DATATIMEOUT) { data->error = -ETIMEDOUT; - else if (status & (MCI_TXUNDERRUN|MCI_RXOVERRUN)) + } else if (status & MCI_STARTBITERR) { + data->error = -ECOMM; + } else if (status & MCI_TXUNDERRUN) { + data->error = -EIO; + } else if (status & MCI_RXOVERRUN) { + if (success > host->variant->fifosize) + success -= host->variant->fifosize; + else + success = 0; data->error = -EIO; - status |= MCI_DATAEND; - - /* - * We hit an error condition. Ensure that any data - * partially written to a page is properly coherent. - */ - if (data->flags & MMC_DATA_READ) { - struct sg_mapping_iter *sg_miter = &host->sg_miter; - unsigned long flags; - - local_irq_save(flags); - if (sg_miter_next(sg_miter)) { - flush_dcache_page(sg_miter->page); - sg_miter_stop(sg_miter); - } - local_irq_restore(flags); } + data->bytes_xfered = round_down(success, data->blksz); } - if (status & MCI_DATAEND) { + + if (status & MCI_DATABLOCKEND) + dev_err(mmc_dev(host->mmc), "stray MCI_DATABLOCKEND interrupt\n"); + + if (status & MCI_DATAEND || data->error) { + if (dma_inprogress(host)) + mmci_dma_finalize(host, data); mmci_stop_data(host); - if (!data->stop) { + if (!data->error) + /* The error clause is handled above, success! */ + data->bytes_xfered = data->blksz * data->blocks; + + if (!data->stop || host->mrq->sbc) { mmci_request_end(host, data->mrq); } else { mmci_start_command(host, data->stop, 0); @@ -289,24 +902,56 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd, unsigned int status) { void __iomem *base = host->base; + bool sbc = (cmd == host->mrq->sbc); + bool busy_resp = host->variant->busy_detect && + (cmd->flags & MMC_RSP_BUSY); - host->cmd = NULL; + /* Check if we need to wait for busy completion. */ + if (host->busy_status && (status & MCI_ST_CARDBUSY)) + return; - cmd->resp[0] = readl(base + MMCIRESPONSE0); - cmd->resp[1] = readl(base + MMCIRESPONSE1); - cmd->resp[2] = readl(base + MMCIRESPONSE2); - cmd->resp[3] = readl(base + MMCIRESPONSE3); + /* Enable busy completion if needed and supported. */ + if (!host->busy_status && busy_resp && + !(status & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT)) && + (readl(base + MMCISTATUS) & MCI_ST_CARDBUSY)) { + writel(readl(base + MMCIMASK0) | MCI_ST_BUSYEND, + base + MMCIMASK0); + host->busy_status = status & (MCI_CMDSENT|MCI_CMDRESPEND); + return; + } + + /* At busy completion, mask the IRQ and complete the request. */ + if (host->busy_status) { + writel(readl(base + MMCIMASK0) & ~MCI_ST_BUSYEND, + base + MMCIMASK0); + host->busy_status = 0; + } + + host->cmd = NULL; if (status & MCI_CMDTIMEOUT) { cmd->error = -ETIMEDOUT; } else if (status & MCI_CMDCRCFAIL && cmd->flags & MMC_RSP_CRC) { cmd->error = -EILSEQ; + } else { + cmd->resp[0] = readl(base + MMCIRESPONSE0); + cmd->resp[1] = readl(base + MMCIRESPONSE1); + cmd->resp[2] = readl(base + MMCIRESPONSE2); + cmd->resp[3] = readl(base + MMCIRESPONSE3); } - if (!cmd->data || cmd->error) { - if (host->data) + if ((!sbc && !cmd->data) || cmd->error) { + if (host->data) { + /* Terminate the DMA transfer */ + if (dma_inprogress(host)) { + mmci_dma_data_error(host); + mmci_dma_unmap(host, host->data); + } mmci_stop_data(host); - mmci_request_end(host, cmd->mrq); + } + mmci_request_end(host, host->mrq); + } else if (sbc) { + mmci_start_command(host, host->mrq->cmd, 0); } else if (!(cmd->data->flags & MMC_DATA_READ)) { mmci_start_data(host, cmd->data); } @@ -328,7 +973,24 @@ static int mmci_pio_read(struct mmci_host *host, char *buffer, unsigned int rema if (count <= 0) break; - readsl(base + MMCIFIFO, ptr, count >> 2); + /* + * SDIO especially may want to send something that is + * not divisible by 4 (as opposed to card sectors + * etc). Therefore make sure to always read the last bytes + * while only doing full 32-bit reads towards the FIFO. + */ + if (unlikely(count & 0x3)) { + if (count < 4) { + unsigned char buf[4]; + ioread32_rep(base + MMCIFIFO, buf, 1); + memcpy(ptr, buf, count); + } else { + ioread32_rep(base + MMCIFIFO, ptr, count >> 2); + count &= ~0x3; + } + } else { + ioread32_rep(base + MMCIFIFO, ptr, count >> 2); + } ptr += count; remain -= count; @@ -356,7 +1018,15 @@ static int mmci_pio_write(struct mmci_host *host, char *buffer, unsigned int rem variant->fifosize : variant->fifohalfsize; count = min(remain, maxcnt); - writesl(base + MMCIFIFO, ptr, count >> 2); + /* + * SDIO especially may want to send something that is + * not divisible by 4 (as opposed to card sectors + * etc), and the FIFO only accept full 32-bit writes. + * So compensate by adding +3 on the count, a single + * byte become a 32bit write, 7 bytes will be two + * 32bit writes etc. + */ + iowrite32_rep(base + MMCIFIFO, ptr, (count + 3) >> 2); ptr += count; remain -= count; @@ -422,9 +1092,6 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id) if (remain) break; - if (status & MCI_RXACTIVE) - flush_dcache_page(sg_miter->page); - status = readl(base + MMCISTATUS); } while (1); @@ -433,11 +1100,11 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id) local_irq_restore(flags); /* - * If we're nearing the end of the read, switch to - * "any data available" mode. + * If we have less than the fifo 'half-full' threshold to transfer, + * trigger a PIO interrupt as soon as any data is available. */ - if (status & MCI_RXACTIVE && host->size < variant->fifosize) - writel(MCI_RXDATAAVLBLMASK, base + MMCIMASK1); + if (status & MCI_RXACTIVE && host->size < variant->fifohalfsize) + mmci_set_mask1(host, MCI_RXDATAAVLBLMASK); /* * If we run out of data, disable the data IRQs; this @@ -446,7 +1113,7 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id) * stops us racing with our data end IRQ. */ if (host->size == 0) { - writel(0, base + MMCIMASK1); + mmci_set_mask1(host, 0); writel(readl(base + MMCIMASK0) | MCI_DATAENDMASK, base + MMCIMASK0); } @@ -469,19 +1136,38 @@ static irqreturn_t mmci_irq(int irq, void *dev_id) struct mmc_data *data; status = readl(host->base + MMCISTATUS); + + if (host->singleirq) { + if (status & readl(host->base + MMCIMASK1)) + mmci_pio_irq(irq, dev_id); + + status &= ~MCI_IRQ1MASK; + } + + /* + * We intentionally clear the MCI_ST_CARDBUSY IRQ here (if it's + * enabled) since the HW seems to be triggering the IRQ on both + * edges while monitoring DAT0 for busy completion. + */ status &= readl(host->base + MMCIMASK0); writel(status, host->base + MMCICLEAR); dev_dbg(mmc_dev(host->mmc), "irq0 (data+cmd) %08x\n", status); + cmd = host->cmd; + if ((status|host->busy_status) & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT| + MCI_CMDSENT|MCI_CMDRESPEND) && cmd) + mmci_cmd_irq(host, cmd, status); + data = host->data; - if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN| - MCI_RXOVERRUN|MCI_DATAEND|MCI_DATABLOCKEND) && data) + if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_STARTBITERR| + MCI_TXUNDERRUN|MCI_RXOVERRUN|MCI_DATAEND| + MCI_DATABLOCKEND) && data) mmci_data_irq(host, data, status); - cmd = host->cmd; - if (status & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT|MCI_CMDSENT|MCI_CMDRESPEND) && cmd) - mmci_cmd_irq(host, cmd, status); + /* Don't poll for busy completion in irq context. */ + if (host->busy_status) + status &= ~MCI_ST_CARDBUSY; ret = 1; } while (status); @@ -498,22 +1184,28 @@ static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq) WARN_ON(host->mrq != NULL); - if (mrq->data && !is_power_of_2(mrq->data->blksz)) { - dev_err(mmc_dev(mmc), "unsupported block size (%d bytes)\n", - mrq->data->blksz); - mrq->cmd->error = -EINVAL; + mrq->cmd->error = mmci_validate_data(host, mrq->data); + if (mrq->cmd->error) { mmc_request_done(mmc, mrq); return; } + pm_runtime_get_sync(mmc_dev(mmc)); + spin_lock_irqsave(&host->lock, flags); host->mrq = mrq; + if (mrq->data) + mmci_get_next_data(host, mrq->data); + if (mrq->data && mrq->data->flags & MMC_DATA_READ) mmci_start_data(host, mrq->data); - mmci_start_command(host, mrq->cmd, 0); + if (mrq->sbc) + mmci_start_command(host, mrq->sbc, 0); + else + mmci_start_command(host, mrq->cmd, 0); spin_unlock_irqrestore(&host->lock, flags); } @@ -521,42 +1213,70 @@ static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq) static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) { struct mmci_host *host = mmc_priv(mmc); + struct variant_data *variant = host->variant; u32 pwr = 0; unsigned long flags; int ret; + pm_runtime_get_sync(mmc_dev(mmc)); + + if (host->plat->ios_handler && + host->plat->ios_handler(mmc_dev(mmc), ios)) + dev_err(mmc_dev(mmc), "platform ios_handler failed\n"); + switch (ios->power_mode) { case MMC_POWER_OFF: - if (host->vcc) - ret = mmc_regulator_set_ocr(mmc, host->vcc, 0); + if (!IS_ERR(mmc->supply.vmmc)) + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); + + if (!IS_ERR(mmc->supply.vqmmc) && host->vqmmc_enabled) { + regulator_disable(mmc->supply.vqmmc); + host->vqmmc_enabled = false; + } + break; case MMC_POWER_UP: - if (host->vcc) { - ret = mmc_regulator_set_ocr(mmc, host->vcc, ios->vdd); - if (ret) { - dev_err(mmc_dev(mmc), "unable to set OCR\n"); - /* - * The .set_ios() function in the mmc_host_ops - * struct return void, and failing to set the - * power should be rare so we print an error - * and return here. - */ - return; - } - } - if (host->plat->vdd_handler) - pwr |= host->plat->vdd_handler(mmc_dev(mmc), ios->vdd, - ios->power_mode); - /* The ST version does not have this, fall through to POWER_ON */ - if (host->hw_designer != AMBA_VENDOR_ST) { - pwr |= MCI_PWR_UP; - break; - } + if (!IS_ERR(mmc->supply.vmmc)) + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd); + + /* + * The ST Micro variant doesn't have the PL180s MCI_PWR_UP + * and instead uses MCI_PWR_ON so apply whatever value is + * configured in the variant data. + */ + pwr |= variant->pwrreg_powerup; + + break; case MMC_POWER_ON: + if (!IS_ERR(mmc->supply.vqmmc) && !host->vqmmc_enabled) { + ret = regulator_enable(mmc->supply.vqmmc); + if (ret < 0) + dev_err(mmc_dev(mmc), + "failed to enable vqmmc regulator\n"); + else + host->vqmmc_enabled = true; + } + pwr |= MCI_PWR_ON; break; } + if (variant->signal_direction && ios->power_mode != MMC_POWER_OFF) { + /* + * The ST Micro variant has some additional bits + * indicating signal direction for the signals in + * the SD/MMC bus and feedback-clock usage. + */ + pwr |= host->pwr_reg_add; + + if (ios->bus_width == MMC_BUS_WIDTH_4) + pwr &= ~MCI_ST_DATA74DIREN; + else if (ios->bus_width == MMC_BUS_WIDTH_1) + pwr &= (~MCI_ST_DATA74DIREN & + ~MCI_ST_DATA31DIREN & + ~MCI_ST_DATA2DIREN); + } + if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) { if (host->hw_designer != AMBA_VENDOR_ST) pwr |= MCI_ROD; @@ -569,112 +1289,159 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) } } + /* + * If clock = 0 and the variant requires the MMCIPOWER to be used for + * gating the clock, the MCI_PWR_ON bit is cleared. + */ + if (!ios->clock && variant->pwrreg_clkgate) + pwr &= ~MCI_PWR_ON; + spin_lock_irqsave(&host->lock, flags); mmci_set_clkreg(host, ios->clock); - - if (host->pwr != pwr) { - host->pwr = pwr; - writel(pwr, host->base + MMCIPOWER); - } + mmci_write_pwrreg(host, pwr); + mmci_reg_delay(host); spin_unlock_irqrestore(&host->lock, flags); -} - -static int mmci_get_ro(struct mmc_host *mmc) -{ - struct mmci_host *host = mmc_priv(mmc); - - if (host->gpio_wp == -ENOSYS) - return -ENOSYS; - return gpio_get_value_cansleep(host->gpio_wp); + pm_runtime_mark_last_busy(mmc_dev(mmc)); + pm_runtime_put_autosuspend(mmc_dev(mmc)); } static int mmci_get_cd(struct mmc_host *mmc) { struct mmci_host *host = mmc_priv(mmc); struct mmci_platform_data *plat = host->plat; - unsigned int status; + unsigned int status = mmc_gpio_get_cd(mmc); - if (host->gpio_cd == -ENOSYS) { + if (status == -ENOSYS) { if (!plat->status) return 1; /* Assume always present */ status = plat->status(mmc_dev(host->mmc)); - } else - status = !!gpio_get_value_cansleep(host->gpio_cd) - ^ plat->cd_invert; - - /* - * Use positive logic throughout - status is zero for no card, - * non-zero for card inserted. - */ + } return status; } -static irqreturn_t mmci_cd_irq(int irq, void *dev_id) +static int mmci_sig_volt_switch(struct mmc_host *mmc, struct mmc_ios *ios) { - struct mmci_host *host = dev_id; + int ret = 0; - mmc_detect_change(host->mmc, msecs_to_jiffies(500)); + if (!IS_ERR(mmc->supply.vqmmc)) { - return IRQ_HANDLED; + pm_runtime_get_sync(mmc_dev(mmc)); + + switch (ios->signal_voltage) { + case MMC_SIGNAL_VOLTAGE_330: + ret = regulator_set_voltage(mmc->supply.vqmmc, + 2700000, 3600000); + break; + case MMC_SIGNAL_VOLTAGE_180: + ret = regulator_set_voltage(mmc->supply.vqmmc, + 1700000, 1950000); + break; + case MMC_SIGNAL_VOLTAGE_120: + ret = regulator_set_voltage(mmc->supply.vqmmc, + 1100000, 1300000); + break; + } + + if (ret) + dev_warn(mmc_dev(mmc), "Voltage switch failed\n"); + + pm_runtime_mark_last_busy(mmc_dev(mmc)); + pm_runtime_put_autosuspend(mmc_dev(mmc)); + } + + return ret; } -static const struct mmc_host_ops mmci_ops = { +static struct mmc_host_ops mmci_ops = { .request = mmci_request, + .pre_req = mmci_pre_request, + .post_req = mmci_post_request, .set_ios = mmci_set_ios, - .get_ro = mmci_get_ro, + .get_ro = mmc_gpio_get_ro, .get_cd = mmci_get_cd, + .start_signal_voltage_switch = mmci_sig_volt_switch, }; -static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) +static int mmci_of_parse(struct device_node *np, struct mmc_host *mmc) +{ + struct mmci_host *host = mmc_priv(mmc); + int ret = mmc_of_parse(mmc); + + if (ret) + return ret; + + if (of_get_property(np, "st,sig-dir-dat0", NULL)) + host->pwr_reg_add |= MCI_ST_DATA0DIREN; + if (of_get_property(np, "st,sig-dir-dat2", NULL)) + host->pwr_reg_add |= MCI_ST_DATA2DIREN; + if (of_get_property(np, "st,sig-dir-dat31", NULL)) + host->pwr_reg_add |= MCI_ST_DATA31DIREN; + if (of_get_property(np, "st,sig-dir-dat74", NULL)) + host->pwr_reg_add |= MCI_ST_DATA74DIREN; + if (of_get_property(np, "st,sig-dir-cmd", NULL)) + host->pwr_reg_add |= MCI_ST_CMDDIREN; + if (of_get_property(np, "st,sig-pin-fbclk", NULL)) + host->pwr_reg_add |= MCI_ST_FBCLKEN; + + if (of_get_property(np, "mmc-cap-mmc-highspeed", NULL)) + mmc->caps |= MMC_CAP_MMC_HIGHSPEED; + if (of_get_property(np, "mmc-cap-sd-highspeed", NULL)) + mmc->caps |= MMC_CAP_SD_HIGHSPEED; + + return 0; +} + +static int mmci_probe(struct amba_device *dev, + const struct amba_id *id) { struct mmci_platform_data *plat = dev->dev.platform_data; + struct device_node *np = dev->dev.of_node; struct variant_data *variant = id->data; struct mmci_host *host; struct mmc_host *mmc; int ret; - /* must have platform data */ - if (!plat) { - ret = -EINVAL; - goto out; + /* Must have platform data or Device Tree. */ + if (!plat && !np) { + dev_err(&dev->dev, "No plat data or DT found\n"); + return -EINVAL; } - ret = amba_request_regions(dev, DRIVER_NAME); - if (ret) - goto out; + if (!plat) { + plat = devm_kzalloc(&dev->dev, sizeof(*plat), GFP_KERNEL); + if (!plat) + return -ENOMEM; + } mmc = mmc_alloc_host(sizeof(struct mmci_host), &dev->dev); - if (!mmc) { - ret = -ENOMEM; - goto rel_regions; - } + if (!mmc) + return -ENOMEM; + + ret = mmci_of_parse(np, mmc); + if (ret) + goto host_free; host = mmc_priv(mmc); host->mmc = mmc; - host->gpio_wp = -ENOSYS; - host->gpio_cd = -ENOSYS; - host->gpio_cd_irq = -1; - host->hw_designer = amba_manf(dev); host->hw_revision = amba_rev(dev); dev_dbg(mmc_dev(mmc), "designer ID = 0x%02x\n", host->hw_designer); dev_dbg(mmc_dev(mmc), "revision = 0x%01x\n", host->hw_revision); - host->clk = clk_get(&dev->dev, NULL); + host->clk = devm_clk_get(&dev->dev, NULL); if (IS_ERR(host->clk)) { ret = PTR_ERR(host->clk); - host->clk = NULL; goto host_free; } - ret = clk_enable(host->clk); + ret = clk_prepare_enable(host->clk); if (ret) - goto clk_free; + goto host_free; host->plat = plat; host->variant = variant; @@ -692,52 +1459,63 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) dev_dbg(mmc_dev(mmc), "eventual mclk rate: %u Hz\n", host->mclk); } - host->base = ioremap(dev->res.start, resource_size(&dev->res)); - if (!host->base) { - ret = -ENOMEM; + + host->phybase = dev->res.start; + host->base = devm_ioremap_resource(&dev->dev, &dev->res); + if (IS_ERR(host->base)) { + ret = PTR_ERR(host->base); goto clk_disable; } - mmc->ops = &mmci_ops; - mmc->f_min = (host->mclk + 511) / 512; /* - * If the platform data supplies a maximum operating - * frequency, this takes precedence. Else, we fall back - * to using the module parameter, which has a (low) - * default value in case it is not specified. Either - * value must not exceed the clock rate into the block, - * of course. + * The ARM and ST versions of the block have slightly different + * clock divider equations which means that the minimum divider + * differs too. + */ + if (variant->st_clkdiv) + mmc->f_min = DIV_ROUND_UP(host->mclk, 257); + else + mmc->f_min = DIV_ROUND_UP(host->mclk, 512); + /* + * If no maximum operating frequency is supplied, fall back to use + * the module parameter, which has a (low) default value in case it + * is not specified. Either value must not exceed the clock rate into + * the block, of course. */ - if (plat->f_max) - mmc->f_max = min(host->mclk, plat->f_max); + if (mmc->f_max) + mmc->f_max = min(host->mclk, mmc->f_max); else mmc->f_max = min(host->mclk, fmax); dev_dbg(mmc_dev(mmc), "clocking block at %u Hz\n", mmc->f_max); -#ifdef CONFIG_REGULATOR - /* If we're using the regulator framework, try to fetch a regulator */ - host->vcc = regulator_get(&dev->dev, "vmmc"); - if (IS_ERR(host->vcc)) - host->vcc = NULL; - else { - int mask = mmc_regulator_get_ocrmask(host->vcc); + /* Get regulators and the supported OCR mask */ + mmc_regulator_get_supply(mmc); + if (!mmc->ocr_avail) + mmc->ocr_avail = plat->ocr_mask; + else if (plat->ocr_mask) + dev_warn(mmc_dev(mmc), "Platform OCR mask is ignored\n"); + + /* DT takes precedence over platform data. */ + if (!np) { + if (!plat->cd_invert) + mmc->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH; + mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; + } - if (mask < 0) - dev_err(&dev->dev, "error getting OCR mask (%d)\n", - mask); - else { - host->mmc->ocr_avail = (u32) mask; - if (plat->ocr_mask) - dev_warn(&dev->dev, - "Provided ocr_mask/setpower will not be used " - "(using regulator instead)\n"); - } + /* We support these capabilities. */ + mmc->caps |= MMC_CAP_CMD23; + + if (variant->busy_detect) { + mmci_ops.card_busy = mmci_card_busy; + mmci_write_datactrlreg(host, MCI_ST_DPSM_BUSYMODE); + mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY; + mmc->max_busy_timeout = 0; } -#endif - /* Fall back to platform data if no regulator is found */ - if (host->vcc == NULL) - mmc->ocr_avail = plat->ocr_mask; - mmc->caps = plat->capabilities; + + mmc->ops = &mmci_ops; + + /* We support these PM capabilities. */ + mmc->pm_caps |= MMC_PM_KEEP_POWER; /* * We can do SGIO @@ -760,12 +1538,13 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) /* * Block size can be up to 2048 bytes, but must be a power of two. */ - mmc->max_blk_size = 2048; + mmc->max_blk_size = 1 << 11; /* - * No limit on the number of blocks transferred. + * Limit the number of blocks transferred so that we don't overflow + * the maximum request size. */ - mmc->max_blk_count = mmc->max_req_size; + mmc->max_blk_count = mmc->max_req_size >> 11; spin_lock_init(&host->lock); @@ -773,88 +1552,71 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) writel(0, host->base + MMCIMASK1); writel(0xfff, host->base + MMCICLEAR); - if (gpio_is_valid(plat->gpio_cd)) { - ret = gpio_request(plat->gpio_cd, DRIVER_NAME " (cd)"); - if (ret == 0) - ret = gpio_direction_input(plat->gpio_cd); - if (ret == 0) - host->gpio_cd = plat->gpio_cd; - else if (ret != -ENOSYS) - goto err_gpio_cd; - - ret = request_any_context_irq(gpio_to_irq(plat->gpio_cd), - mmci_cd_irq, 0, - DRIVER_NAME " (cd)", host); - if (ret >= 0) - host->gpio_cd_irq = gpio_to_irq(plat->gpio_cd); - } - if (gpio_is_valid(plat->gpio_wp)) { - ret = gpio_request(plat->gpio_wp, DRIVER_NAME " (wp)"); - if (ret == 0) - ret = gpio_direction_input(plat->gpio_wp); - if (ret == 0) - host->gpio_wp = plat->gpio_wp; - else if (ret != -ENOSYS) - goto err_gpio_wp; - } - - if ((host->plat->status || host->gpio_cd != -ENOSYS) - && host->gpio_cd_irq < 0) - mmc->caps |= MMC_CAP_NEEDS_POLL; - - ret = request_irq(dev->irq[0], mmci_irq, IRQF_SHARED, DRIVER_NAME " (cmd)", host); - if (ret) - goto unmap; + /* If DT, cd/wp gpios must be supplied through it. */ + if (!np && gpio_is_valid(plat->gpio_cd)) { + ret = mmc_gpio_request_cd(mmc, plat->gpio_cd, 0); + if (ret) + goto clk_disable; + } + if (!np && gpio_is_valid(plat->gpio_wp)) { + ret = mmc_gpio_request_ro(mmc, plat->gpio_wp); + if (ret) + goto clk_disable; + } - ret = request_irq(dev->irq[1], mmci_pio_irq, IRQF_SHARED, DRIVER_NAME " (pio)", host); + ret = devm_request_irq(&dev->dev, dev->irq[0], mmci_irq, IRQF_SHARED, + DRIVER_NAME " (cmd)", host); if (ret) - goto irq0_free; + goto clk_disable; + + if (!dev->irq[1]) + host->singleirq = true; + else { + ret = devm_request_irq(&dev->dev, dev->irq[1], mmci_pio_irq, + IRQF_SHARED, DRIVER_NAME " (pio)", host); + if (ret) + goto clk_disable; + } writel(MCI_IRQENABLE, host->base + MMCIMASK0); amba_set_drvdata(dev, mmc); - mmc_add_host(mmc); + dev_info(&dev->dev, "%s: PL%03x manf %x rev%u at 0x%08llx irq %d,%d (pio)\n", + mmc_hostname(mmc), amba_part(dev), amba_manf(dev), + amba_rev(dev), (unsigned long long)dev->res.start, + dev->irq[0], dev->irq[1]); - dev_info(&dev->dev, "%s: MMCI rev %x cfg %02x at 0x%016llx irq %d,%d\n", - mmc_hostname(mmc), amba_rev(dev), amba_config(dev), - (unsigned long long)dev->res.start, dev->irq[0], dev->irq[1]); + mmci_dma_setup(host); + + pm_runtime_set_autosuspend_delay(&dev->dev, 50); + pm_runtime_use_autosuspend(&dev->dev); + pm_runtime_put(&dev->dev); + + mmc_add_host(mmc); return 0; - irq0_free: - free_irq(dev->irq[0], host); - unmap: - if (host->gpio_wp != -ENOSYS) - gpio_free(host->gpio_wp); - err_gpio_wp: - if (host->gpio_cd_irq >= 0) - free_irq(host->gpio_cd_irq, host); - if (host->gpio_cd != -ENOSYS) - gpio_free(host->gpio_cd); - err_gpio_cd: - iounmap(host->base); clk_disable: - clk_disable(host->clk); - clk_free: - clk_put(host->clk); + clk_disable_unprepare(host->clk); host_free: mmc_free_host(mmc); - rel_regions: - amba_release_regions(dev); - out: return ret; } -static int __devexit mmci_remove(struct amba_device *dev) +static int mmci_remove(struct amba_device *dev) { struct mmc_host *mmc = amba_get_drvdata(dev); - amba_set_drvdata(dev, NULL); - if (mmc) { struct mmci_host *host = mmc_priv(mmc); + /* + * Undo pm_runtime_put() in probe. We use the _sync + * version here so that we can access the primecell. + */ + pm_runtime_get_sync(&dev->dev); + mmc_remove_host(mmc); writel(0, host->base + MMCIMASK0); @@ -863,76 +1625,103 @@ static int __devexit mmci_remove(struct amba_device *dev) writel(0, host->base + MMCICOMMAND); writel(0, host->base + MMCIDATACTRL); - free_irq(dev->irq[0], host); - free_irq(dev->irq[1], host); - - if (host->gpio_wp != -ENOSYS) - gpio_free(host->gpio_wp); - if (host->gpio_cd_irq >= 0) - free_irq(host->gpio_cd_irq, host); - if (host->gpio_cd != -ENOSYS) - gpio_free(host->gpio_cd); + mmci_dma_release(host); + clk_disable_unprepare(host->clk); + mmc_free_host(mmc); + } - iounmap(host->base); - clk_disable(host->clk); - clk_put(host->clk); + return 0; +} - if (host->vcc) - mmc_regulator_set_ocr(mmc, host->vcc, 0); - regulator_put(host->vcc); +#ifdef CONFIG_PM +static void mmci_save(struct mmci_host *host) +{ + unsigned long flags; - mmc_free_host(mmc); + spin_lock_irqsave(&host->lock, flags); - amba_release_regions(dev); + writel(0, host->base + MMCIMASK0); + if (host->variant->pwrreg_nopower) { + writel(0, host->base + MMCIDATACTRL); + writel(0, host->base + MMCIPOWER); + writel(0, host->base + MMCICLOCK); } + mmci_reg_delay(host); - return 0; + spin_unlock_irqrestore(&host->lock, flags); } -#ifdef CONFIG_PM -static int mmci_suspend(struct amba_device *dev, pm_message_t state) +static void mmci_restore(struct mmci_host *host) { - struct mmc_host *mmc = amba_get_drvdata(dev); - int ret = 0; + unsigned long flags; - if (mmc) { - struct mmci_host *host = mmc_priv(mmc); + spin_lock_irqsave(&host->lock, flags); - ret = mmc_suspend_host(mmc); - if (ret == 0) - writel(0, host->base + MMCIMASK0); + if (host->variant->pwrreg_nopower) { + writel(host->clk_reg, host->base + MMCICLOCK); + writel(host->datactrl_reg, host->base + MMCIDATACTRL); + writel(host->pwr_reg, host->base + MMCIPOWER); } + writel(MCI_IRQENABLE, host->base + MMCIMASK0); + mmci_reg_delay(host); - return ret; + spin_unlock_irqrestore(&host->lock, flags); } -static int mmci_resume(struct amba_device *dev) +static int mmci_runtime_suspend(struct device *dev) { - struct mmc_host *mmc = amba_get_drvdata(dev); - int ret = 0; + struct amba_device *adev = to_amba_device(dev); + struct mmc_host *mmc = amba_get_drvdata(adev); if (mmc) { struct mmci_host *host = mmc_priv(mmc); + pinctrl_pm_select_sleep_state(dev); + mmci_save(host); + clk_disable_unprepare(host->clk); + } + + return 0; +} - writel(MCI_IRQENABLE, host->base + MMCIMASK0); +static int mmci_runtime_resume(struct device *dev) +{ + struct amba_device *adev = to_amba_device(dev); + struct mmc_host *mmc = amba_get_drvdata(adev); - ret = mmc_resume_host(mmc); + if (mmc) { + struct mmci_host *host = mmc_priv(mmc); + clk_prepare_enable(host->clk); + mmci_restore(host); + pinctrl_pm_select_default_state(dev); } - return ret; + return 0; } -#else -#define mmci_suspend NULL -#define mmci_resume NULL #endif +static const struct dev_pm_ops mmci_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) + SET_PM_RUNTIME_PM_OPS(mmci_runtime_suspend, mmci_runtime_resume, NULL) +}; + static struct amba_id mmci_ids[] = { { .id = 0x00041180, - .mask = 0x000fffff, + .mask = 0xff0fffff, .data = &variant_arm, }, { + .id = 0x01041180, + .mask = 0xff0fffff, + .data = &variant_arm_extended_fifo, + }, + { + .id = 0x02041180, + .mask = 0xff0fffff, + .data = &variant_arm_extended_fifo_hwfc, + }, + { .id = 0x00041181, .mask = 0x000fffff, .data = &variant_arm, @@ -944,41 +1733,42 @@ static struct amba_id mmci_ids[] = { .data = &variant_u300, }, { + .id = 0x10180180, + .mask = 0xf0ffffff, + .data = &variant_nomadik, + }, + { .id = 0x00280180, .mask = 0x00ffffff, .data = &variant_u300, }, { .id = 0x00480180, - .mask = 0x00ffffff, + .mask = 0xf0ffffff, .data = &variant_ux500, }, + { + .id = 0x10480180, + .mask = 0xf0ffffff, + .data = &variant_ux500v2, + }, { 0, 0 }, }; +MODULE_DEVICE_TABLE(amba, mmci_ids); + static struct amba_driver mmci_driver = { .drv = { .name = DRIVER_NAME, + .pm = &mmci_dev_pm_ops, }, .probe = mmci_probe, - .remove = __devexit_p(mmci_remove), - .suspend = mmci_suspend, - .resume = mmci_resume, + .remove = mmci_remove, .id_table = mmci_ids, }; -static int __init mmci_init(void) -{ - return amba_driver_register(&mmci_driver); -} - -static void __exit mmci_exit(void) -{ - amba_driver_unregister(&mmci_driver); -} +module_amba_driver(mmci_driver); -module_init(mmci_init); -module_exit(mmci_exit); module_param(fmax, uint, 0444); MODULE_DESCRIPTION("ARM PrimeCell PL180/181 Multimedia Card Interface driver"); diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index 4ae887fc018..347d942d740 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -11,23 +11,35 @@ #define MCI_PWR_OFF 0x00 #define MCI_PWR_UP 0x02 #define MCI_PWR_ON 0x03 -#define MCI_DATA2DIREN (1 << 2) -#define MCI_CMDDIREN (1 << 3) -#define MCI_DATA0DIREN (1 << 4) -#define MCI_DATA31DIREN (1 << 5) #define MCI_OD (1 << 6) #define MCI_ROD (1 << 7) -/* The ST Micro version does not have ROD */ -#define MCI_FBCLKEN (1 << 7) -#define MCI_DATA74DIREN (1 << 8) +/* + * The ST Micro version does not have ROD and reuse the voltage registers for + * direction settings. + */ +#define MCI_ST_DATA2DIREN (1 << 2) +#define MCI_ST_CMDDIREN (1 << 3) +#define MCI_ST_DATA0DIREN (1 << 4) +#define MCI_ST_DATA31DIREN (1 << 5) +#define MCI_ST_FBCLKEN (1 << 7) +#define MCI_ST_DATA74DIREN (1 << 8) #define MMCICLOCK 0x004 #define MCI_CLK_ENABLE (1 << 8) #define MCI_CLK_PWRSAVE (1 << 9) #define MCI_CLK_BYPASS (1 << 10) #define MCI_4BIT_BUS (1 << 11) -/* 8bit wide buses supported in ST Micro versions */ +/* + * 8bit wide buses, hardware flow contronl, negative edges and clock inversion + * supported in ST Micro U300 and Ux500 versions + */ #define MCI_ST_8BIT_BUS (1 << 12) +#define MCI_ST_U300_HWFCEN (1 << 13) +#define MCI_ST_UX500_NEG_EDGE (1 << 13) +#define MCI_ST_UX500_HWFCEN (1 << 14) +#define MCI_ST_UX500_CLK_INV (1 << 15) +/* Modified PL180 on Versatile Express platform */ +#define MCI_ARM_HWFCEN (1 << 12) #define MMCIARGUMENT 0x008 #define MMCICOMMAND 0x00c @@ -36,10 +48,11 @@ #define MCI_CPSM_INTERRUPT (1 << 8) #define MCI_CPSM_PENDING (1 << 9) #define MCI_CPSM_ENABLE (1 << 10) -#define MCI_SDIO_SUSP (1 << 11) -#define MCI_ENCMD_COMPL (1 << 12) -#define MCI_NIEN (1 << 13) -#define MCI_CE_ATACMD (1 << 14) +/* Argument flag extenstions in the ST Micro versions */ +#define MCI_ST_SDIO_SUSP (1 << 11) +#define MCI_ST_ENCMD_COMPL (1 << 12) +#define MCI_ST_NIEN (1 << 13) +#define MCI_ST_CE_ATACMD (1 << 14) #define MMCIRESPCMD 0x010 #define MMCIRESPONSE0 0x014 @@ -76,6 +89,7 @@ #define MCI_CMDRESPEND (1 << 6) #define MCI_CMDSENT (1 << 7) #define MCI_DATAEND (1 << 8) +#define MCI_STARTBITERR (1 << 9) #define MCI_DATABLOCKEND (1 << 10) #define MCI_CMDACTIVE (1 << 11) #define MCI_TXACTIVE (1 << 12) @@ -88,8 +102,10 @@ #define MCI_RXFIFOEMPTY (1 << 19) #define MCI_TXDATAAVLBL (1 << 20) #define MCI_RXDATAAVLBL (1 << 21) -#define MCI_SDIOIT (1 << 22) -#define MCI_CEATAEND (1 << 23) +/* Extended status bits for the ST Micro variants */ +#define MCI_ST_SDIOIT (1 << 22) +#define MCI_ST_CEATAEND (1 << 23) +#define MCI_ST_CARDBUSY (1 << 24) #define MMCICLEAR 0x038 #define MCI_CMDCRCFAILCLR (1 << 0) @@ -101,9 +117,12 @@ #define MCI_CMDRESPENDCLR (1 << 6) #define MCI_CMDSENTCLR (1 << 7) #define MCI_DATAENDCLR (1 << 8) +#define MCI_STARTBITERRCLR (1 << 9) #define MCI_DATABLOCKENDCLR (1 << 10) -#define MCI_SDIOITC (1 << 22) -#define MCI_CEATAENDC (1 << 23) +/* Extended status bits for the ST Micro variants */ +#define MCI_ST_SDIOITC (1 << 22) +#define MCI_ST_CEATAENDC (1 << 23) +#define MCI_ST_BUSYENDC (1 << 24) #define MMCIMASK0 0x03c #define MCI_CMDCRCFAILMASK (1 << 0) @@ -115,6 +134,7 @@ #define MCI_CMDRESPENDMASK (1 << 6) #define MCI_CMDSENTMASK (1 << 7) #define MCI_DATAENDMASK (1 << 8) +#define MCI_STARTBITERRMASK (1 << 9) #define MCI_DATABLOCKENDMASK (1 << 10) #define MCI_CMDACTIVEMASK (1 << 11) #define MCI_TXACTIVEMASK (1 << 12) @@ -127,8 +147,10 @@ #define MCI_RXFIFOEMPTYMASK (1 << 19) #define MCI_TXDATAAVLBLMASK (1 << 20) #define MCI_RXDATAAVLBLMASK (1 << 21) -#define MCI_SDIOITMASK (1 << 22) -#define MCI_CEATAENDMASK (1 << 23) +/* Extended status bits for the ST Micro variants */ +#define MCI_ST_SDIOITMASK (1 << 22) +#define MCI_ST_CEATAENDMASK (1 << 23) +#define MCI_ST_BUSYEND (1 << 24) #define MMCIMASK1 0x040 #define MMCIFIFOCNT 0x048 @@ -137,31 +159,45 @@ #define MCI_IRQENABLE \ (MCI_CMDCRCFAILMASK|MCI_DATACRCFAILMASK|MCI_CMDTIMEOUTMASK| \ MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK| \ - MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_DATABLOCKENDMASK) + MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_STARTBITERRMASK) + +/* These interrupts are directed to IRQ1 when two IRQ lines are available */ +#define MCI_IRQ1MASK \ + (MCI_RXFIFOHALFFULLMASK | MCI_RXDATAAVLBLMASK | \ + MCI_TXFIFOHALFEMPTYMASK) -#define NR_SG 16 +#define NR_SG 128 struct clk; struct variant_data; +struct dma_chan; + +struct mmci_host_next { + struct dma_async_tx_descriptor *dma_desc; + struct dma_chan *dma_chan; + s32 cookie; +}; struct mmci_host { + phys_addr_t phybase; void __iomem *base; struct mmc_request *mrq; struct mmc_command *cmd; struct mmc_data *data; struct mmc_host *mmc; struct clk *clk; - int gpio_cd; - int gpio_wp; - int gpio_cd_irq; - - unsigned int data_xfered; + bool singleirq; spinlock_t lock; unsigned int mclk; unsigned int cclk; - u32 pwr; + u32 pwr_reg; + u32 pwr_reg_add; + u32 clk_reg; + u32 datactrl_reg; + u32 busy_status; + bool vqmmc_enabled; struct mmci_platform_data *plat; struct variant_data *variant; @@ -174,6 +210,18 @@ struct mmci_host { /* pio stuff */ struct sg_mapping_iter sg_miter; unsigned int size; - struct regulator *vcc; + +#ifdef CONFIG_DMA_ENGINE + /* DMA stuff */ + struct dma_chan *dma_current; + struct dma_chan *dma_rx_channel; + struct dma_chan *dma_tx_channel; + struct dma_async_tx_descriptor *dma_desc_current; + struct mmci_host_next next_data; + +#define dma_inprogress(host) ((host)->dma_current) +#else +#define dma_inprogress(host) (0) +#endif }; diff --git a/drivers/mmc/host/moxart-mmc.c b/drivers/mmc/host/moxart-mmc.c new file mode 100644 index 00000000000..74924a04026 --- /dev/null +++ b/drivers/mmc/host/moxart-mmc.c @@ -0,0 +1,730 @@ +/* + * MOXA ART MMC host driver. + * + * Copyright (C) 2014 Jonas Jensen + * + * Jonas Jensen <jonas.jensen@gmail.com> + * + * Based on code from + * Moxa Technologies Co., Ltd. <www.moxa.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/version.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/blkdev.h> +#include <linux/dma-mapping.h> +#include <linux/dmaengine.h> +#include <linux/mmc/host.h> +#include <linux/mmc/sd.h> +#include <linux/sched.h> +#include <linux/io.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/clk.h> +#include <linux/bitops.h> +#include <linux/of_dma.h> +#include <linux/spinlock.h> + +#define REG_COMMAND 0 +#define REG_ARGUMENT 4 +#define REG_RESPONSE0 8 +#define REG_RESPONSE1 12 +#define REG_RESPONSE2 16 +#define REG_RESPONSE3 20 +#define REG_RESPONSE_COMMAND 24 +#define REG_DATA_CONTROL 28 +#define REG_DATA_TIMER 32 +#define REG_DATA_LENGTH 36 +#define REG_STATUS 40 +#define REG_CLEAR 44 +#define REG_INTERRUPT_MASK 48 +#define REG_POWER_CONTROL 52 +#define REG_CLOCK_CONTROL 56 +#define REG_BUS_WIDTH 60 +#define REG_DATA_WINDOW 64 +#define REG_FEATURE 68 +#define REG_REVISION 72 + +/* REG_COMMAND */ +#define CMD_SDC_RESET BIT(10) +#define CMD_EN BIT(9) +#define CMD_APP_CMD BIT(8) +#define CMD_LONG_RSP BIT(7) +#define CMD_NEED_RSP BIT(6) +#define CMD_IDX_MASK 0x3f + +/* REG_RESPONSE_COMMAND */ +#define RSP_CMD_APP BIT(6) +#define RSP_CMD_IDX_MASK 0x3f + +/* REG_DATA_CONTROL */ +#define DCR_DATA_FIFO_RESET BIT(8) +#define DCR_DATA_THRES BIT(7) +#define DCR_DATA_EN BIT(6) +#define DCR_DMA_EN BIT(5) +#define DCR_DATA_WRITE BIT(4) +#define DCR_BLK_SIZE 0x0f + +/* REG_DATA_LENGTH */ +#define DATA_LEN_MASK 0xffffff + +/* REG_STATUS */ +#define WRITE_PROT BIT(12) +#define CARD_DETECT BIT(11) +/* 1-10 below can be sent to either registers, interrupt or clear. */ +#define CARD_CHANGE BIT(10) +#define FIFO_ORUN BIT(9) +#define FIFO_URUN BIT(8) +#define DATA_END BIT(7) +#define CMD_SENT BIT(6) +#define DATA_CRC_OK BIT(5) +#define RSP_CRC_OK BIT(4) +#define DATA_TIMEOUT BIT(3) +#define RSP_TIMEOUT BIT(2) +#define DATA_CRC_FAIL BIT(1) +#define RSP_CRC_FAIL BIT(0) + +#define MASK_RSP (RSP_TIMEOUT | RSP_CRC_FAIL | \ + RSP_CRC_OK | CARD_DETECT | CMD_SENT) + +#define MASK_DATA (DATA_CRC_OK | DATA_END | \ + DATA_CRC_FAIL | DATA_TIMEOUT) + +#define MASK_INTR_PIO (FIFO_URUN | FIFO_ORUN | CARD_CHANGE) + +/* REG_POWER_CONTROL */ +#define SD_POWER_ON BIT(4) +#define SD_POWER_MASK 0x0f + +/* REG_CLOCK_CONTROL */ +#define CLK_HISPD BIT(9) +#define CLK_OFF BIT(8) +#define CLK_SD BIT(7) +#define CLK_DIV_MASK 0x7f + +/* REG_BUS_WIDTH */ +#define BUS_WIDTH_8 BIT(2) +#define BUS_WIDTH_4 BIT(1) +#define BUS_WIDTH_1 BIT(0) + +#define MMC_VDD_360 23 +#define MIN_POWER (MMC_VDD_360 - SD_POWER_MASK) +#define MAX_RETRIES 500000 + +struct moxart_host { + spinlock_t lock; + + void __iomem *base; + + phys_addr_t reg_phys; + + struct dma_chan *dma_chan_tx; + struct dma_chan *dma_chan_rx; + struct dma_async_tx_descriptor *tx_desc; + struct mmc_host *mmc; + struct mmc_request *mrq; + struct scatterlist *cur_sg; + struct completion dma_complete; + struct completion pio_complete; + + u32 num_sg; + u32 data_remain; + u32 data_len; + u32 fifo_width; + u32 timeout; + u32 rate; + + long sysclk; + + bool have_dma; + bool is_removed; +}; + +static inline void moxart_init_sg(struct moxart_host *host, + struct mmc_data *data) +{ + host->cur_sg = data->sg; + host->num_sg = data->sg_len; + host->data_remain = host->cur_sg->length; + + if (host->data_remain > host->data_len) + host->data_remain = host->data_len; +} + +static inline int moxart_next_sg(struct moxart_host *host) +{ + int remain; + struct mmc_data *data = host->mrq->cmd->data; + + host->cur_sg++; + host->num_sg--; + + if (host->num_sg > 0) { + host->data_remain = host->cur_sg->length; + remain = host->data_len - data->bytes_xfered; + if (remain > 0 && remain < host->data_remain) + host->data_remain = remain; + } + + return host->num_sg; +} + +static int moxart_wait_for_status(struct moxart_host *host, + u32 mask, u32 *status) +{ + int ret = -ETIMEDOUT; + u32 i; + + for (i = 0; i < MAX_RETRIES; i++) { + *status = readl(host->base + REG_STATUS); + if (!(*status & mask)) { + udelay(5); + continue; + } + writel(*status & mask, host->base + REG_CLEAR); + ret = 0; + break; + } + + if (ret) + dev_err(mmc_dev(host->mmc), "timed out waiting for status\n"); + + return ret; +} + + +static void moxart_send_command(struct moxart_host *host, + struct mmc_command *cmd) +{ + u32 status, cmdctrl; + + writel(RSP_TIMEOUT | RSP_CRC_OK | + RSP_CRC_FAIL | CMD_SENT, host->base + REG_CLEAR); + writel(cmd->arg, host->base + REG_ARGUMENT); + + cmdctrl = cmd->opcode & CMD_IDX_MASK; + if (cmdctrl == SD_APP_SET_BUS_WIDTH || cmdctrl == SD_APP_OP_COND || + cmdctrl == SD_APP_SEND_SCR || cmdctrl == SD_APP_SD_STATUS || + cmdctrl == SD_APP_SEND_NUM_WR_BLKS) + cmdctrl |= CMD_APP_CMD; + + if (cmd->flags & MMC_RSP_PRESENT) + cmdctrl |= CMD_NEED_RSP; + + if (cmd->flags & MMC_RSP_136) + cmdctrl |= CMD_LONG_RSP; + + writel(cmdctrl | CMD_EN, host->base + REG_COMMAND); + + if (moxart_wait_for_status(host, MASK_RSP, &status) == -ETIMEDOUT) + cmd->error = -ETIMEDOUT; + + if (status & RSP_TIMEOUT) { + cmd->error = -ETIMEDOUT; + return; + } + if (status & RSP_CRC_FAIL) { + cmd->error = -EIO; + return; + } + if (status & RSP_CRC_OK) { + if (cmd->flags & MMC_RSP_136) { + cmd->resp[3] = readl(host->base + REG_RESPONSE0); + cmd->resp[2] = readl(host->base + REG_RESPONSE1); + cmd->resp[1] = readl(host->base + REG_RESPONSE2); + cmd->resp[0] = readl(host->base + REG_RESPONSE3); + } else { + cmd->resp[0] = readl(host->base + REG_RESPONSE0); + } + } +} + +static void moxart_dma_complete(void *param) +{ + struct moxart_host *host = param; + + complete(&host->dma_complete); +} + +static void moxart_transfer_dma(struct mmc_data *data, struct moxart_host *host) +{ + u32 len, dir_data, dir_slave; + unsigned long dma_time; + struct dma_async_tx_descriptor *desc = NULL; + struct dma_chan *dma_chan; + + if (host->data_len == data->bytes_xfered) + return; + + if (data->flags & MMC_DATA_WRITE) { + dma_chan = host->dma_chan_tx; + dir_data = DMA_TO_DEVICE; + dir_slave = DMA_MEM_TO_DEV; + } else { + dma_chan = host->dma_chan_rx; + dir_data = DMA_FROM_DEVICE; + dir_slave = DMA_DEV_TO_MEM; + } + + len = dma_map_sg(dma_chan->device->dev, data->sg, + data->sg_len, dir_data); + + if (len > 0) { + desc = dmaengine_prep_slave_sg(dma_chan, data->sg, + len, dir_slave, + DMA_PREP_INTERRUPT | + DMA_CTRL_ACK); + } else { + dev_err(mmc_dev(host->mmc), "dma_map_sg returned zero length\n"); + } + + if (desc) { + host->tx_desc = desc; + desc->callback = moxart_dma_complete; + desc->callback_param = host; + dmaengine_submit(desc); + dma_async_issue_pending(dma_chan); + } + + data->bytes_xfered += host->data_remain; + + dma_time = wait_for_completion_interruptible_timeout( + &host->dma_complete, host->timeout); + + dma_unmap_sg(dma_chan->device->dev, + data->sg, data->sg_len, + dir_data); +} + + +static void moxart_transfer_pio(struct moxart_host *host) +{ + struct mmc_data *data = host->mrq->cmd->data; + u32 *sgp, len = 0, remain, status; + + if (host->data_len == data->bytes_xfered) + return; + + sgp = sg_virt(host->cur_sg); + remain = host->data_remain; + + if (data->flags & MMC_DATA_WRITE) { + while (remain > 0) { + if (moxart_wait_for_status(host, FIFO_URUN, &status) + == -ETIMEDOUT) { + data->error = -ETIMEDOUT; + complete(&host->pio_complete); + return; + } + for (len = 0; len < remain && len < host->fifo_width;) { + iowrite32(*sgp, host->base + REG_DATA_WINDOW); + sgp++; + len += 4; + } + remain -= len; + } + + } else { + while (remain > 0) { + if (moxart_wait_for_status(host, FIFO_ORUN, &status) + == -ETIMEDOUT) { + data->error = -ETIMEDOUT; + complete(&host->pio_complete); + return; + } + for (len = 0; len < remain && len < host->fifo_width;) { + /* SCR data must be read in big endian. */ + if (data->mrq->cmd->opcode == SD_APP_SEND_SCR) + *sgp = ioread32be(host->base + + REG_DATA_WINDOW); + else + *sgp = ioread32(host->base + + REG_DATA_WINDOW); + sgp++; + len += 4; + } + remain -= len; + } + } + + data->bytes_xfered += host->data_remain - remain; + host->data_remain = remain; + + if (host->data_len != data->bytes_xfered) + moxart_next_sg(host); + else + complete(&host->pio_complete); +} + +static void moxart_prepare_data(struct moxart_host *host) +{ + struct mmc_data *data = host->mrq->cmd->data; + u32 datactrl; + int blksz_bits; + + if (!data) + return; + + host->data_len = data->blocks * data->blksz; + blksz_bits = ffs(data->blksz) - 1; + BUG_ON(1 << blksz_bits != data->blksz); + + moxart_init_sg(host, data); + + datactrl = DCR_DATA_EN | (blksz_bits & DCR_BLK_SIZE); + + if (data->flags & MMC_DATA_WRITE) + datactrl |= DCR_DATA_WRITE; + + if ((host->data_len > host->fifo_width) && host->have_dma) + datactrl |= DCR_DMA_EN; + + writel(DCR_DATA_FIFO_RESET, host->base + REG_DATA_CONTROL); + writel(MASK_DATA | FIFO_URUN | FIFO_ORUN, host->base + REG_CLEAR); + writel(host->rate, host->base + REG_DATA_TIMER); + writel(host->data_len, host->base + REG_DATA_LENGTH); + writel(datactrl, host->base + REG_DATA_CONTROL); +} + +static void moxart_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct moxart_host *host = mmc_priv(mmc); + unsigned long pio_time, flags; + u32 status; + + spin_lock_irqsave(&host->lock, flags); + + init_completion(&host->dma_complete); + init_completion(&host->pio_complete); + + host->mrq = mrq; + + if (readl(host->base + REG_STATUS) & CARD_DETECT) { + mrq->cmd->error = -ETIMEDOUT; + goto request_done; + } + + moxart_prepare_data(host); + moxart_send_command(host, host->mrq->cmd); + + if (mrq->cmd->data) { + if ((host->data_len > host->fifo_width) && host->have_dma) { + + writel(CARD_CHANGE, host->base + REG_INTERRUPT_MASK); + + spin_unlock_irqrestore(&host->lock, flags); + + moxart_transfer_dma(mrq->cmd->data, host); + + spin_lock_irqsave(&host->lock, flags); + } else { + + writel(MASK_INTR_PIO, host->base + REG_INTERRUPT_MASK); + + spin_unlock_irqrestore(&host->lock, flags); + + /* PIO transfers start from interrupt. */ + pio_time = wait_for_completion_interruptible_timeout( + &host->pio_complete, host->timeout); + + spin_lock_irqsave(&host->lock, flags); + } + + if (host->is_removed) { + dev_err(mmc_dev(host->mmc), "card removed\n"); + mrq->cmd->error = -ETIMEDOUT; + goto request_done; + } + + if (moxart_wait_for_status(host, MASK_DATA, &status) + == -ETIMEDOUT) { + mrq->cmd->data->error = -ETIMEDOUT; + goto request_done; + } + + if (status & DATA_CRC_FAIL) + mrq->cmd->data->error = -ETIMEDOUT; + + if (mrq->cmd->data->stop) + moxart_send_command(host, mrq->cmd->data->stop); + } + +request_done: + spin_unlock_irqrestore(&host->lock, flags); + mmc_request_done(host->mmc, mrq); +} + +static irqreturn_t moxart_irq(int irq, void *devid) +{ + struct moxart_host *host = (struct moxart_host *)devid; + u32 status; + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + + status = readl(host->base + REG_STATUS); + if (status & CARD_CHANGE) { + host->is_removed = status & CARD_DETECT; + if (host->is_removed && host->have_dma) { + dmaengine_terminate_all(host->dma_chan_tx); + dmaengine_terminate_all(host->dma_chan_rx); + } + host->mrq = NULL; + writel(MASK_INTR_PIO, host->base + REG_CLEAR); + writel(CARD_CHANGE, host->base + REG_INTERRUPT_MASK); + mmc_detect_change(host->mmc, 0); + } + if (status & (FIFO_ORUN | FIFO_URUN) && host->mrq) + moxart_transfer_pio(host); + + spin_unlock_irqrestore(&host->lock, flags); + + return IRQ_HANDLED; +} + +static void moxart_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct moxart_host *host = mmc_priv(mmc); + unsigned long flags; + u8 power, div; + u32 ctrl; + + spin_lock_irqsave(&host->lock, flags); + + if (ios->clock) { + for (div = 0; div < CLK_DIV_MASK; ++div) { + if (ios->clock >= host->sysclk / (2 * (div + 1))) + break; + } + ctrl = CLK_SD | div; + host->rate = host->sysclk / (2 * (div + 1)); + if (host->rate > host->sysclk) + ctrl |= CLK_HISPD; + writel(ctrl, host->base + REG_CLOCK_CONTROL); + } + + if (ios->power_mode == MMC_POWER_OFF) { + writel(readl(host->base + REG_POWER_CONTROL) & ~SD_POWER_ON, + host->base + REG_POWER_CONTROL); + } else { + if (ios->vdd < MIN_POWER) + power = 0; + else + power = ios->vdd - MIN_POWER; + + writel(SD_POWER_ON | (u32) power, + host->base + REG_POWER_CONTROL); + } + + switch (ios->bus_width) { + case MMC_BUS_WIDTH_4: + writel(BUS_WIDTH_4, host->base + REG_BUS_WIDTH); + break; + case MMC_BUS_WIDTH_8: + writel(BUS_WIDTH_8, host->base + REG_BUS_WIDTH); + break; + default: + writel(BUS_WIDTH_1, host->base + REG_BUS_WIDTH); + break; + } + + spin_unlock_irqrestore(&host->lock, flags); +} + + +static int moxart_get_ro(struct mmc_host *mmc) +{ + struct moxart_host *host = mmc_priv(mmc); + + return !!(readl(host->base + REG_STATUS) & WRITE_PROT); +} + +static struct mmc_host_ops moxart_ops = { + .request = moxart_request, + .set_ios = moxart_set_ios, + .get_ro = moxart_get_ro, +}; + +static int moxart_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + struct resource res_mmc; + struct mmc_host *mmc; + struct moxart_host *host = NULL; + struct dma_slave_config cfg; + struct clk *clk; + void __iomem *reg_mmc; + dma_cap_mask_t mask; + int irq, ret; + u32 i; + + mmc = mmc_alloc_host(sizeof(struct moxart_host), dev); + if (!mmc) { + dev_err(dev, "mmc_alloc_host failed\n"); + ret = -ENOMEM; + goto out; + } + + ret = of_address_to_resource(node, 0, &res_mmc); + if (ret) { + dev_err(dev, "of_address_to_resource failed\n"); + goto out; + } + + irq = irq_of_parse_and_map(node, 0); + if (irq <= 0) { + dev_err(dev, "irq_of_parse_and_map failed\n"); + ret = -EINVAL; + goto out; + } + + clk = of_clk_get(node, 0); + if (IS_ERR(clk)) { + dev_err(dev, "of_clk_get failed\n"); + ret = PTR_ERR(clk); + goto out; + } + + reg_mmc = devm_ioremap_resource(dev, &res_mmc); + if (IS_ERR(reg_mmc)) { + ret = PTR_ERR(reg_mmc); + goto out; + } + + mmc_of_parse(mmc); + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + host = mmc_priv(mmc); + host->mmc = mmc; + host->base = reg_mmc; + host->reg_phys = res_mmc.start; + host->timeout = msecs_to_jiffies(1000); + host->sysclk = clk_get_rate(clk); + host->fifo_width = readl(host->base + REG_FEATURE) << 2; + host->dma_chan_tx = of_dma_request_slave_channel(node, "tx"); + host->dma_chan_rx = of_dma_request_slave_channel(node, "rx"); + + spin_lock_init(&host->lock); + + mmc->ops = &moxart_ops; + mmc->f_max = DIV_ROUND_CLOSEST(host->sysclk, 2); + mmc->f_min = DIV_ROUND_CLOSEST(host->sysclk, CLK_DIV_MASK * 2); + mmc->ocr_avail = 0xffff00; /* Support 2.0v - 3.6v power. */ + + if (IS_ERR(host->dma_chan_tx) || IS_ERR(host->dma_chan_rx)) { + dev_dbg(dev, "PIO mode transfer enabled\n"); + host->have_dma = false; + } else { + dev_dbg(dev, "DMA channels found (%p,%p)\n", + host->dma_chan_tx, host->dma_chan_rx); + host->have_dma = true; + + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + + cfg.direction = DMA_MEM_TO_DEV; + cfg.src_addr = 0; + cfg.dst_addr = host->reg_phys + REG_DATA_WINDOW; + dmaengine_slave_config(host->dma_chan_tx, &cfg); + + cfg.direction = DMA_DEV_TO_MEM; + cfg.src_addr = host->reg_phys + REG_DATA_WINDOW; + cfg.dst_addr = 0; + dmaengine_slave_config(host->dma_chan_rx, &cfg); + } + + switch ((readl(host->base + REG_BUS_WIDTH) >> 3) & 3) { + case 1: + mmc->caps |= MMC_CAP_4_BIT_DATA; + break; + case 2: + mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA; + break; + default: + break; + } + + writel(0, host->base + REG_INTERRUPT_MASK); + + writel(CMD_SDC_RESET, host->base + REG_COMMAND); + for (i = 0; i < MAX_RETRIES; i++) { + if (!(readl(host->base + REG_COMMAND) & CMD_SDC_RESET)) + break; + udelay(5); + } + + ret = devm_request_irq(dev, irq, moxart_irq, 0, "moxart-mmc", host); + if (ret) + goto out; + + dev_set_drvdata(dev, mmc); + mmc_add_host(mmc); + + dev_dbg(dev, "IRQ=%d, FIFO is %d bytes\n", irq, host->fifo_width); + + return 0; + +out: + if (mmc) + mmc_free_host(mmc); + return ret; +} + +static int moxart_remove(struct platform_device *pdev) +{ + struct mmc_host *mmc = dev_get_drvdata(&pdev->dev); + struct moxart_host *host = mmc_priv(mmc); + + dev_set_drvdata(&pdev->dev, NULL); + + if (mmc) { + if (!IS_ERR(host->dma_chan_tx)) + dma_release_channel(host->dma_chan_tx); + if (!IS_ERR(host->dma_chan_rx)) + dma_release_channel(host->dma_chan_rx); + mmc_remove_host(mmc); + mmc_free_host(mmc); + + writel(0, host->base + REG_INTERRUPT_MASK); + writel(0, host->base + REG_POWER_CONTROL); + writel(readl(host->base + REG_CLOCK_CONTROL) | CLK_OFF, + host->base + REG_CLOCK_CONTROL); + } + + kfree(host); + + return 0; +} + +static const struct of_device_id moxart_mmc_match[] = { + { .compatible = "moxa,moxart-mmc" }, + { .compatible = "faraday,ftsdc010" }, + { } +}; + +static struct platform_driver moxart_mmc_driver = { + .probe = moxart_probe, + .remove = moxart_remove, + .driver = { + .name = "mmc-moxart", + .owner = THIS_MODULE, + .of_match_table = moxart_mmc_match, + }, +}; +module_platform_driver(moxart_mmc_driver); + +MODULE_ALIAS("platform:mmc-moxart"); +MODULE_DESCRIPTION("MOXA ART MMC driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Jonas Jensen <jonas.jensen@gmail.com>"); diff --git a/drivers/mmc/host/msm_sdcc.c b/drivers/mmc/host/msm_sdcc.c index 1290d14c583..9405ecdaf6c 100644 --- a/drivers/mmc/host/msm_sdcc.c +++ b/drivers/mmc/host/msm_sdcc.c @@ -36,14 +36,15 @@ #include <linux/io.h> #include <linux/memory.h> #include <linux/gfp.h> +#include <linux/gpio.h> #include <asm/cacheflush.h> #include <asm/div64.h> #include <asm/sizes.h> -#include <mach/mmc.h> -#include <mach/msm_iomap.h> +#include <linux/platform_data/mmc-msm_sdcc.h> #include <mach/dma.h> +#include <mach/clk.h> #include "msm_sdcc.h" @@ -126,6 +127,40 @@ static void msmsdcc_start_command(struct msmsdcc_host *host, struct mmc_command *cmd, u32 c); +static void msmsdcc_reset_and_restore(struct msmsdcc_host *host) +{ + u32 mci_clk = 0; + u32 mci_mask0 = 0; + int ret = 0; + + /* Save the controller state */ + mci_clk = readl(host->base + MMCICLOCK); + mci_mask0 = readl(host->base + MMCIMASK0); + + /* Reset the controller */ + ret = clk_reset(host->clk, CLK_RESET_ASSERT); + if (ret) + pr_err("%s: Clock assert failed at %u Hz with err %d\n", + mmc_hostname(host->mmc), host->clk_rate, ret); + + ret = clk_reset(host->clk, CLK_RESET_DEASSERT); + if (ret) + pr_err("%s: Clock deassert failed at %u Hz with err %d\n", + mmc_hostname(host->mmc), host->clk_rate, ret); + + pr_info("%s: Controller has been re-initialiazed\n", + mmc_hostname(host->mmc)); + + /* Restore the contoller state */ + writel(host->pwr, host->base + MMCIPOWER); + writel(mci_clk, host->base + MMCICLOCK); + writel(mci_mask0, host->base + MMCIMASK0); + ret = clk_set_rate(host->clk, host->clk_rate); + if (ret) + pr_err("%s: Failed to set clk rate %u Hz (%d)\n", + mmc_hostname(host->mmc), host->clk_rate, ret); +} + static void msmsdcc_request_end(struct msmsdcc_host *host, struct mmc_request *mrq) { @@ -155,7 +190,7 @@ static void msmsdcc_stop_data(struct msmsdcc_host *host) { host->curr.data = NULL; - host->curr.got_dataend = host->curr.got_datablkend = 0; + host->curr.got_dataend = 0; } uint32_t msmsdcc_fifo_addr(struct msmsdcc_host *host) @@ -177,7 +212,8 @@ msmsdcc_dma_exec_func(struct msm_dmov_cmd *cmd) msmsdcc_writel(host, host->cmd_timeout, MMCIDATATIMER); msmsdcc_writel(host, (unsigned int)host->curr.xfer_size, MMCIDATALENGTH); - msmsdcc_writel(host, host->cmd_pio_irqmask, MMCIMASK1); + msmsdcc_writel(host, (msmsdcc_readl(host, MMCIMASK0) & + (~MCI_IRQ_PIO)) | host->cmd_pio_irqmask, MMCIMASK0); msmsdcc_writel(host, host->cmd_datactrl, MMCIDATACTRL); if (host->cmd_cmd) { @@ -189,61 +225,52 @@ msmsdcc_dma_exec_func(struct msm_dmov_cmd *cmd) } static void -msmsdcc_dma_complete_func(struct msm_dmov_cmd *cmd, - unsigned int result, - struct msm_dmov_errdata *err) +msmsdcc_dma_complete_tlet(unsigned long data) { - struct msmsdcc_dma_data *dma_data = - container_of(cmd, struct msmsdcc_dma_data, hdr); - struct msmsdcc_host *host = dma_data->host; + struct msmsdcc_host *host = (struct msmsdcc_host *)data; unsigned long flags; struct mmc_request *mrq; + struct msm_dmov_errdata err; spin_lock_irqsave(&host->lock, flags); host->dma.active = 0; + err = host->dma.err; mrq = host->curr.mrq; BUG_ON(!mrq); WARN_ON(!mrq->data); - if (!(result & DMOV_RSLT_VALID)) { + if (!(host->dma.result & DMOV_RSLT_VALID)) { pr_err("msmsdcc: Invalid DataMover result\n"); goto out; } - if (result & DMOV_RSLT_DONE) { + if (host->dma.result & DMOV_RSLT_DONE) { host->curr.data_xfered = host->curr.xfer_size; } else { /* Error or flush */ - if (result & DMOV_RSLT_ERROR) + if (host->dma.result & DMOV_RSLT_ERROR) pr_err("%s: DMA error (0x%.8x)\n", - mmc_hostname(host->mmc), result); - if (result & DMOV_RSLT_FLUSH) + mmc_hostname(host->mmc), host->dma.result); + if (host->dma.result & DMOV_RSLT_FLUSH) pr_err("%s: DMA channel flushed (0x%.8x)\n", - mmc_hostname(host->mmc), result); - if (err) - pr_err("Flush data: %.8x %.8x %.8x %.8x %.8x %.8x\n", - err->flush[0], err->flush[1], err->flush[2], - err->flush[3], err->flush[4], err->flush[5]); + mmc_hostname(host->mmc), host->dma.result); + + pr_err("Flush data: %.8x %.8x %.8x %.8x %.8x %.8x\n", + err.flush[0], err.flush[1], err.flush[2], + err.flush[3], err.flush[4], err.flush[5]); + + msmsdcc_reset_and_restore(host); if (!mrq->data->error) mrq->data->error = -EIO; } dma_unmap_sg(mmc_dev(host->mmc), host->dma.sg, host->dma.num_ents, host->dma.dir); - if (host->curr.user_pages) { - struct scatterlist *sg = host->dma.sg; - int i; - - for (i = 0; i < host->dma.num_ents; i++) - flush_dcache_page(sg_page(sg++)); - } - host->dma.sg = NULL; host->dma.busy = 0; - if ((host->curr.got_dataend && host->curr.got_datablkend) - || mrq->data->error) { + if (host->curr.got_dataend || mrq->data->error) { /* * If we've already gotten our DATAEND / DATABLKEND @@ -273,6 +300,22 @@ out: return; } +static void +msmsdcc_dma_complete_func(struct msm_dmov_cmd *cmd, + unsigned int result, + struct msm_dmov_errdata *err) +{ + struct msmsdcc_dma_data *dma_data = + container_of(cmd, struct msmsdcc_dma_data, hdr); + struct msmsdcc_host *host = dma_data->host; + + dma_data->result = result; + if (err) + memcpy(&dma_data->err, err, sizeof(struct msm_dmov_errdata)); + + tasklet_schedule(&host->dma_tlet); +} + static int validate_dma(struct msmsdcc_host *host, struct mmc_data *data) { if (host->dma.channel == -1) @@ -333,14 +376,30 @@ static int msmsdcc_config_dma(struct msmsdcc_host *host, struct mmc_data *data) host->curr.user_pages = 0; box = &nc->cmd[0]; - for (i = 0; i < host->dma.num_ents; i++) { - box->cmd = CMD_MODE_BOX; - /* Initialize sg dma address */ - sg->dma_address = page_to_dma(mmc_dev(host->mmc), sg_page(sg)) - + sg->offset; + /* location of command block must be 64 bit aligned */ + BUG_ON(host->dma.cmd_busaddr & 0x07); - if (i == (host->dma.num_ents - 1)) + nc->cmdptr = (host->dma.cmd_busaddr >> 3) | CMD_PTR_LP; + host->dma.hdr.cmdptr = DMOV_CMD_PTR_LIST | + DMOV_CMD_ADDR(host->dma.cmdptr_busaddr); + host->dma.hdr.complete_func = msmsdcc_dma_complete_func; + + n = dma_map_sg(mmc_dev(host->mmc), host->dma.sg, + host->dma.num_ents, host->dma.dir); + if (n == 0) { + pr_err("%s: Unable to map in all sg elements\n", + mmc_hostname(host->mmc)); + host->dma.sg = NULL; + host->dma.num_ents = 0; + return -ENOMEM; + } + + for_each_sg(host->dma.sg, sg, n, i) { + + box->cmd = CMD_MODE_BOX; + + if (i == n - 1) box->cmd |= CMD_LC; rows = (sg_dma_len(sg) % MCI_FIFOSIZE) ? (sg_dma_len(sg) / MCI_FIFOSIZE) + 1 : @@ -368,27 +427,6 @@ static int msmsdcc_config_dma(struct msmsdcc_host *host, struct mmc_data *data) box->cmd |= CMD_DST_CRCI(crci); } box++; - sg++; - } - - /* location of command block must be 64 bit aligned */ - BUG_ON(host->dma.cmd_busaddr & 0x07); - - nc->cmdptr = (host->dma.cmd_busaddr >> 3) | CMD_PTR_LP; - host->dma.hdr.cmdptr = DMOV_CMD_PTR_LIST | - DMOV_CMD_ADDR(host->dma.cmdptr_busaddr); - host->dma.hdr.complete_func = msmsdcc_dma_complete_func; - - n = dma_map_sg(mmc_dev(host->mmc), host->dma.sg, - host->dma.num_ents, host->dma.dir); -/* dsb inside dma_map_sg will write nc out to mem as well */ - - if (n != host->dma.num_ents) { - printk(KERN_ERR "%s: Unable to map in all sg elements\n", - mmc_hostname(host->mmc)); - host->dma.sg = NULL; - host->dma.num_ents = 0; - return -ENOMEM; } return 0; @@ -424,6 +462,11 @@ msmsdcc_start_command_deferred(struct msmsdcc_host *host, (cmd->opcode == 53)) *c |= MCI_CSPM_DATCMD; + if (host->prog_scan && (cmd->opcode == 12)) { + *c |= MCI_CPSM_PROGENA; + host->prog_enable = true; + } + if (cmd == cmd->mrq->stop) *c |= MCI_CSPM_MCIABORT; @@ -431,7 +474,7 @@ msmsdcc_start_command_deferred(struct msmsdcc_host *host, *c |= MCI_CSPM_MCIABORT; if (host->curr.cmd != NULL) { - printk(KERN_ERR "%s: Overlapping command requests\n", + pr_err("%s: Overlapping command requests\n", mmc_hostname(host->mmc)); } host->curr.cmd = cmd; @@ -450,7 +493,6 @@ msmsdcc_start_data(struct msmsdcc_host *host, struct mmc_data *data, host->curr.xfer_remain = host->curr.xfer_size; host->curr.data_xfered = 0; host->curr.got_dataend = 0; - host->curr.got_datablkend = 0; memset(&host->pio, 0, sizeof(host->pio)); @@ -494,12 +536,16 @@ msmsdcc_start_data(struct msmsdcc_host *host, struct mmc_data *data, host->cmd_c = c; } msm_dmov_enqueue_cmd(host->dma.channel, &host->dma.hdr); + if (data->flags & MMC_DATA_WRITE) + host->prog_scan = true; } else { msmsdcc_writel(host, timeout, MMCIDATATIMER); msmsdcc_writel(host, host->curr.xfer_size, MMCIDATALENGTH); - msmsdcc_writel(host, pio_irqmask, MMCIMASK1); + msmsdcc_writel(host, (msmsdcc_readl(host, MMCIMASK0) & + (~MCI_IRQ_PIO)) | pio_irqmask, MMCIMASK0); + msmsdcc_writel(host, datactrl, MMCIDATACTRL); if (cmd) { @@ -555,6 +601,9 @@ msmsdcc_pio_read(struct msmsdcc_host *host, char *buffer, unsigned int remain) uint32_t *ptr = (uint32_t *) buffer; int count = 0; + if (remain % 4) + remain = ((remain >> 2) + 1) << 2; + while (msmsdcc_readl(host, MMCISTATUS) & MCI_RXDATAAVLBL) { *ptr = msmsdcc_readl(host, MMCIFIFO + (count % MCI_FIFOSIZE)); ptr++; @@ -575,13 +624,14 @@ msmsdcc_pio_write(struct msmsdcc_host *host, char *buffer, char *ptr = buffer; do { - unsigned int count, maxcnt; + unsigned int count, maxcnt, sz; maxcnt = status & MCI_TXFIFOEMPTY ? MCI_FIFOSIZE : MCI_FIFOHALFSIZE; count = min(remain, maxcnt); - writesl(base + MMCIFIFO, ptr, count >> 2); + sz = count % 4 ? (count >> 2) + 1 : (count >> 2); + writesl(base + MMCIFIFO, ptr, sz); ptr += count; remain -= count; @@ -611,8 +661,13 @@ msmsdcc_pio_irq(int irq, void *dev_id) { struct msmsdcc_host *host = dev_id; uint32_t status; + u32 mci_mask0; status = msmsdcc_readl(host, MMCISTATUS); + mci_mask0 = msmsdcc_readl(host, MMCIMASK0); + + if (((mci_mask0 & status) & MCI_IRQ_PIO) == 0) + return IRQ_NONE; do { unsigned long flags; @@ -633,8 +688,8 @@ msmsdcc_pio_irq(int irq, void *dev_id) /* Map the current scatter buffer */ local_irq_save(flags); - buffer = kmap_atomic(sg_page(host->pio.sg), - KM_BIO_SRC_IRQ) + host->pio.sg->offset; + buffer = kmap_atomic(sg_page(host->pio.sg)) + + host->pio.sg->offset; buffer += host->pio.sg_off; remain = host->pio.sg->length - host->pio.sg_off; len = 0; @@ -644,7 +699,7 @@ msmsdcc_pio_irq(int irq, void *dev_id) len = msmsdcc_pio_write(host, buffer, remain, status); /* Unmap the buffer */ - kunmap_atomic(buffer, KM_BIO_SRC_IRQ); + kunmap_atomic(buffer); local_irq_restore(flags); host->pio.sg_off += len; @@ -671,10 +726,12 @@ msmsdcc_pio_irq(int irq, void *dev_id) } while (1); if (status & MCI_RXACTIVE && host->curr.xfer_remain < MCI_FIFOSIZE) - msmsdcc_writel(host, MCI_RXDATAAVLBLMASK, MMCIMASK1); + msmsdcc_writel(host, (mci_mask0 & (~MCI_IRQ_PIO)) | + MCI_RXDATAAVLBLMASK, MMCIMASK0); if (!host->curr.xfer_remain) - msmsdcc_writel(host, 0, MMCIMASK1); + msmsdcc_writel(host, (mci_mask0 & (~MCI_IRQ_PIO)) | 0, + MMCIMASK0); return IRQ_HANDLED; } @@ -702,10 +759,26 @@ static void msmsdcc_do_cmdirq(struct msmsdcc_host *host, uint32_t status) msm_dmov_stop_cmd(host->dma.channel, &host->dma.hdr, 0); else if (host->curr.data) { /* Non DMA */ + msmsdcc_reset_and_restore(host); msmsdcc_stop_data(host); msmsdcc_request_end(host, cmd->mrq); - } else /* host->data == NULL */ - msmsdcc_request_end(host, cmd->mrq); + } else { /* host->data == NULL */ + if (!cmd->error && host->prog_enable) { + if (status & MCI_PROGDONE) { + host->prog_scan = false; + host->prog_enable = false; + msmsdcc_request_end(host, cmd->mrq); + } else { + host->curr.cmd = cmd; + } + } else { + if (host->prog_enable) { + host->prog_scan = false; + host->prog_enable = false; + } + msmsdcc_request_end(host, cmd->mrq); + } + } } else if (cmd->data) if (!(cmd->data->flags & MMC_DATA_READ)) msmsdcc_start_data(host, cmd->data, @@ -719,7 +792,7 @@ msmsdcc_handle_irq_data(struct msmsdcc_host *host, u32 status, struct mmc_data *data = host->curr.data; if (status & (MCI_CMDSENT | MCI_CMDRESPEND | MCI_CMDCRCFAIL | - MCI_CMDTIMEOUT) && host->curr.cmd) { + MCI_CMDTIMEOUT | MCI_PROGDONE) && host->curr.cmd) { msmsdcc_do_cmdirq(host, status); } @@ -735,6 +808,7 @@ msmsdcc_handle_irq_data(struct msmsdcc_host *host, u32 status, msm_dmov_stop_cmd(host->dma.channel, &host->dma.hdr, 0); else { + msmsdcc_reset_and_restore(host); if (host->curr.data) msmsdcc_stop_data(host); if (!data->stop) @@ -748,14 +822,10 @@ msmsdcc_handle_irq_data(struct msmsdcc_host *host, u32 status, if (!host->curr.got_dataend && (status & MCI_DATAEND)) host->curr.got_dataend = 1; - if (!host->curr.got_datablkend && (status & MCI_DATABLOCKEND)) - host->curr.got_datablkend = 1; - /* * If DMA is still in progress, we complete via the completion handler */ - if (host->curr.got_dataend && host->curr.got_datablkend && - !host->dma.busy) { + if (host->curr.got_dataend && !host->dma.busy) { /* * There appears to be an issue in the controller where * if you request a small block transfer (< fifo size), @@ -792,8 +862,9 @@ msmsdcc_irq(int irq, void *dev_id) do { status = msmsdcc_readl(host, MMCISTATUS); - status &= (msmsdcc_readl(host, MMCIMASK0) | - MCI_DATABLOCKENDMASK); + status &= msmsdcc_readl(host, MMCIMASK0); + if ((status & (~MCI_IRQ_PIO)) == 0) + break; msmsdcc_writel(host, status, MMCICLEAR); if (status & MCI_SDIOINTR) @@ -874,6 +945,38 @@ msmsdcc_request(struct mmc_host *mmc, struct mmc_request *mrq) spin_unlock_irqrestore(&host->lock, flags); } +static void msmsdcc_setup_gpio(struct msmsdcc_host *host, bool enable) +{ + struct msm_mmc_gpio_data *curr; + int i, rc = 0; + + if (!host->plat->gpio_data || host->gpio_config_status == enable) + return; + + curr = host->plat->gpio_data; + for (i = 0; i < curr->size; i++) { + if (enable) { + rc = gpio_request(curr->gpio[i].no, + curr->gpio[i].name); + if (rc) { + pr_err("%s: gpio_request(%d, %s) failed %d\n", + mmc_hostname(host->mmc), + curr->gpio[i].no, + curr->gpio[i].name, rc); + goto free_gpios; + } + } else { + gpio_free(curr->gpio[i].no); + } + } + host->gpio_config_status = enable; + return; + +free_gpios: + for (; i >= 0; i--) + gpio_free(curr->gpio[i].no); +} + static void msmsdcc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) { @@ -886,6 +989,8 @@ msmsdcc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) msmsdcc_enable_clocks(host); + spin_unlock_irqrestore(&host->lock, flags); + if (ios->clock) { if (ios->clock != host->clk_rate) { rc = clk_set_rate(host->clk, ios->clock); @@ -912,9 +1017,11 @@ msmsdcc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) switch (ios->power_mode) { case MMC_POWER_OFF: + msmsdcc_setup_gpio(host, false); break; case MMC_POWER_UP: pwr |= MCI_PWR_UP; + msmsdcc_setup_gpio(host, true); break; case MMC_POWER_ON: pwr |= MCI_PWR_ON; @@ -931,9 +1038,10 @@ msmsdcc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) msmsdcc_writel(host, pwr, MMCIPOWER); } #if BUSCLK_PWRSAVE + spin_lock_irqsave(&host->lock, flags); msmsdcc_disable_clocks(host, 1); -#endif spin_unlock_irqrestore(&host->lock, flags); +#endif } static void msmsdcc_enable_sdio_irq(struct mmc_host *mmc, int enable) @@ -955,10 +1063,19 @@ static void msmsdcc_enable_sdio_irq(struct mmc_host *mmc, int enable) spin_unlock_irqrestore(&host->lock, flags); } +static void msmsdcc_init_card(struct mmc_host *mmc, struct mmc_card *card) +{ + struct msmsdcc_host *host = mmc_priv(mmc); + + if (host->plat->init_card) + host->plat->init_card(card); +} + static const struct mmc_host_ops msmsdcc_ops = { .request = msmsdcc_request, .set_ios = msmsdcc_set_ios, .enable_sdio_irq = msmsdcc_enable_sdio_irq, + .init_card = msmsdcc_init_card, }; static void @@ -995,7 +1112,7 @@ msmsdcc_platform_status_irq(int irq, void *dev_id) { struct msmsdcc_host *host = dev_id; - printk(KERN_DEBUG "%s: %d\n", __func__, irq); + pr_debug("%s: %d\n", __func__, irq); msmsdcc_check_status((unsigned long) host); return IRQ_HANDLED; } @@ -1005,7 +1122,7 @@ msmsdcc_status_notify_cb(int card_present, void *dev_id) { struct msmsdcc_host *host = dev_id; - printk(KERN_DEBUG "%s: card_present %d\n", mmc_hostname(host->mmc), + pr_debug("%s: card_present %d\n", mmc_hostname(host->mmc), card_present); msmsdcc_check_status((unsigned long) host); } @@ -1053,7 +1170,6 @@ msmsdcc_probe(struct platform_device *pdev) struct msmsdcc_host *host; struct mmc_host *mmc; struct resource *cmd_irqres = NULL; - struct resource *pio_irqres = NULL; struct resource *stat_irqres = NULL; struct resource *memres = NULL; struct resource *dmares = NULL; @@ -1078,12 +1194,10 @@ msmsdcc_probe(struct platform_device *pdev) dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0); cmd_irqres = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "cmd_irq"); - pio_irqres = platform_get_resource_byname(pdev, IORESOURCE_IRQ, - "pio_irq"); stat_irqres = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "status_irq"); - if (!cmd_irqres || !pio_irqres || !memres) { + if (!cmd_irqres || !memres) { pr_err("%s: Invalid resource\n", __func__); return -ENXIO; } @@ -1103,31 +1217,43 @@ msmsdcc_probe(struct platform_device *pdev) host->plat = plat; host->mmc = mmc; host->curr.cmd = NULL; + init_timer(&host->busclk_timer); + host->busclk_timer.data = (unsigned long) host; + host->busclk_timer.function = msmsdcc_busclk_expired; + host->cmdpoll = 1; host->base = ioremap(memres->start, PAGE_SIZE); if (!host->base) { ret = -ENOMEM; - goto out; + goto host_free; } host->cmd_irqres = cmd_irqres; - host->pio_irqres = pio_irqres; host->memres = memres; host->dmares = dmares; spin_lock_init(&host->lock); + tasklet_init(&host->dma_tlet, msmsdcc_dma_complete_tlet, + (unsigned long)host); + /* * Setup DMA */ - msmsdcc_init_dma(host); + if (host->dmares) { + ret = msmsdcc_init_dma(host); + if (ret) + goto ioremap_free; + } else { + host->dma.channel = -1; + } /* Get our clocks */ host->pclk = clk_get(&pdev->dev, "sdc_pclk"); if (IS_ERR(host->pclk)) { ret = PTR_ERR(host->pclk); - goto host_free; + goto dma_free; } host->clk = clk_get(&pdev->dev, "sdc_clk"); @@ -1136,17 +1262,25 @@ msmsdcc_probe(struct platform_device *pdev) goto pclk_put; } - /* Enable clocks */ - ret = msmsdcc_enable_clocks(host); - if (ret) - goto clk_put; - ret = clk_set_rate(host->clk, msmsdcc_fmin); if (ret) { pr_err("%s: Clock rate set failed (%d)\n", __func__, ret); - goto clk_disable; + goto clk_put; } + ret = clk_prepare(host->pclk); + if (ret) + goto clk_put; + + ret = clk_prepare(host->clk); + if (ret) + goto clk_unprepare_p; + + /* Enable clocks */ + ret = msmsdcc_enable_clocks(host); + if (ret) + goto clk_unprepare; + host->pclk_rate = clk_get_rate(host->pclk); host->clk_rate = clk_get_rate(host->clk); @@ -1216,16 +1350,12 @@ msmsdcc_probe(struct platform_device *pdev) host->eject = !host->oldstat; } - init_timer(&host->busclk_timer); - host->busclk_timer.data = (unsigned long) host; - host->busclk_timer.function = msmsdcc_busclk_expired; - ret = request_irq(cmd_irqres->start, msmsdcc_irq, IRQF_SHARED, DRIVER_NAME " (cmd)", host); if (ret) goto stat_irq_free; - ret = request_irq(pio_irqres->start, msmsdcc_pio_irq, IRQF_SHARED, + ret = request_irq(cmd_irqres->start, msmsdcc_pio_irq, IRQF_SHARED, DRIVER_NAME " (pio)", host); if (ret) goto cmd_irq_free; @@ -1256,9 +1386,6 @@ msmsdcc_probe(struct platform_device *pdev) if (host->timer.function) pr_info("%s: Polling status mode enabled\n", mmc_hostname(mmc)); -#if BUSCLK_PWRSAVE - msmsdcc_disable_clocks(host, 1); -#endif return 0; cmd_irq_free: free_irq(cmd_irqres->start, host); @@ -1267,10 +1394,21 @@ msmsdcc_probe(struct platform_device *pdev) free_irq(host->stat_irq, host); clk_disable: msmsdcc_disable_clocks(host, 0); + clk_unprepare: + clk_unprepare(host->clk); + clk_unprepare_p: + clk_unprepare(host->pclk); clk_put: clk_put(host->clk); pclk_put: clk_put(host->pclk); +dma_free: + if (host->dmares) + dma_free_coherent(NULL, sizeof(struct msmsdcc_nc_dmadata), + host->dma.nc, host->dma.nc_busaddr); +ioremap_free: + tasklet_kill(&host->dma_tlet); + iounmap(host->base); host_free: mmc_free_host(mmc); out: @@ -1278,28 +1416,10 @@ msmsdcc_probe(struct platform_device *pdev) } #ifdef CONFIG_PM -#ifdef CONFIG_MMC_MSM7X00A_RESUME_IN_WQ -static void -do_resume_work(struct work_struct *work) -{ - struct msmsdcc_host *host = - container_of(work, struct msmsdcc_host, resume_task); - struct mmc_host *mmc = host->mmc; - - if (mmc) { - mmc_resume_host(mmc); - if (host->stat_irq) - enable_irq(host->stat_irq); - } -} -#endif - - static int msmsdcc_suspend(struct platform_device *dev, pm_message_t state) { struct mmc_host *mmc = mmc_get_drvdata(dev); - int rc = 0; if (mmc) { struct msmsdcc_host *host = mmc_priv(mmc); @@ -1307,14 +1427,11 @@ msmsdcc_suspend(struct platform_device *dev, pm_message_t state) if (host->stat_irq) disable_irq(host->stat_irq); - if (mmc->card && mmc->card->type != MMC_TYPE_SDIO) - rc = mmc_suspend_host(mmc); - if (!rc) - msmsdcc_writel(host, 0, MMCIMASK0); + msmsdcc_writel(host, 0, MMCIMASK0); if (host->clks_on) msmsdcc_disable_clocks(host, 0); } - return rc; + return 0; } static int @@ -1329,8 +1446,6 @@ msmsdcc_resume(struct platform_device *dev) msmsdcc_writel(host, host->saved_irq0mask, MMCIMASK0); - if (mmc->card && mmc->card->type != MMC_TYPE_SDIO) - mmc_resume_host(mmc); if (host->stat_irq) enable_irq(host->stat_irq); #if BUSCLK_PWRSAVE @@ -1353,18 +1468,7 @@ static struct platform_driver msmsdcc_driver = { }, }; -static int __init msmsdcc_init(void) -{ - return platform_driver_register(&msmsdcc_driver); -} - -static void __exit msmsdcc_exit(void) -{ - platform_driver_unregister(&msmsdcc_driver); -} - -module_init(msmsdcc_init); -module_exit(msmsdcc_exit); +module_platform_driver(msmsdcc_driver); MODULE_DESCRIPTION("Qualcomm MSM 7X00A Multimedia Card Interface driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/mmc/host/msm_sdcc.h b/drivers/mmc/host/msm_sdcc.h index ff2b0f74f6f..402028d16b8 100644 --- a/drivers/mmc/host/msm_sdcc.h +++ b/drivers/mmc/host/msm_sdcc.h @@ -138,8 +138,13 @@ #define MCI_IRQENABLE \ (MCI_CMDCRCFAILMASK|MCI_DATACRCFAILMASK|MCI_CMDTIMEOUTMASK| \ MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK| \ - MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_DATAENDMASK) + MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_DATAENDMASK|MCI_PROGDONEMASK) +#define MCI_IRQ_PIO \ + (MCI_RXDATAAVLBLMASK | MCI_TXDATAAVLBLMASK | MCI_RXFIFOEMPTYMASK | \ + MCI_TXFIFOEMPTYMASK | MCI_RXFIFOFULLMASK | MCI_TXFIFOFULLMASK | \ + MCI_RXFIFOHALFFULLMASK | MCI_TXFIFOHALFEMPTYMASK | \ + MCI_RXACTIVEMASK | MCI_TXACTIVEMASK) /* * The size of the FIFO in bytes. */ @@ -172,6 +177,8 @@ struct msmsdcc_dma_data { struct msmsdcc_host *host; int busy; /* Set if DM is busy */ int active; + unsigned int result; + struct msm_dmov_errdata err; }; struct msmsdcc_pio_data { @@ -188,7 +195,6 @@ struct msmsdcc_curr_req { unsigned int xfer_remain; /* Bytes remaining to send */ unsigned int data_xfered; /* Bytes acked by BLKEND irq */ int got_dataend; - int got_datablkend; int user_pages; }; @@ -201,7 +207,6 @@ struct msmsdcc_stats { struct msmsdcc_host { struct resource *cmd_irqres; - struct resource *pio_irqres; struct resource *memres; struct resource *dmares; void __iomem *base; @@ -235,13 +240,17 @@ struct msmsdcc_host { int cmdpoll; struct msmsdcc_stats stats; + struct tasklet_struct dma_tlet; /* Command parameters */ unsigned int cmd_timeout; unsigned int cmd_pio_irqmask; unsigned int cmd_datactrl; struct mmc_command *cmd_cmd; u32 cmd_c; + bool gpio_config_status; + bool prog_scan; + bool prog_enable; }; #endif diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c index a5bf60e01af..6b4c5ad3b39 100644 --- a/drivers/mmc/host/mvsdio.c +++ b/drivers/mmc/host/mvsdio.c @@ -19,18 +19,23 @@ #include <linux/dma-mapping.h> #include <linux/scatterlist.h> #include <linux/irq.h> +#include <linux/clk.h> #include <linux/gpio.h> +#include <linux/of_gpio.h> +#include <linux/of_irq.h> #include <linux/mmc/host.h> +#include <linux/mmc/slot-gpio.h> +#include <linux/pinctrl/consumer.h> #include <asm/sizes.h> #include <asm/unaligned.h> -#include <plat/mvsdio.h> +#include <linux/platform_data/mmc-mvsdio.h> #include "mvsdio.h" #define DRIVER_NAME "mvsdio" -static int maxfreq = MVSD_CLOCKRATE_MAX; +static int maxfreq; static int nodma; struct mvsd_host { @@ -49,10 +54,7 @@ struct mvsd_host { struct timer_list timer; struct mmc_host *mmc; struct device *dev; - struct resource *res; - int irq; - int gpio_card_detect; - int gpio_write_protect; + struct clk *clk; }; #define mvsd_write(offs, val) writel(val, iobase + (offs)) @@ -77,11 +79,11 @@ static int mvsd_setup_data(struct mvsd_host *host, struct mmc_data *data) unsigned long t = jiffies + HZ; unsigned int hw_state, count = 0; do { + hw_state = mvsd_read(MVSD_HW_STATE); if (time_after(jiffies, t)) { dev_warn(host->dev, "FIFO_EMPTY bit missing\n"); break; } - hw_state = mvsd_read(MVSD_HW_STATE); count++; } while (!(hw_state & (1 << 13))); dev_dbg(host->dev, "*** wait for FIFO_EMPTY bit " @@ -117,10 +119,8 @@ static int mvsd_setup_data(struct mvsd_host *host, struct mmc_data *data) host->pio_size = data->blocks * data->blksz; host->pio_ptr = sg_virt(data->sg); if (!nodma) - printk(KERN_DEBUG "%s: fallback to PIO for data " - "at 0x%p size %d\n", - mmc_hostname(host->mmc), - host->pio_ptr, host->pio_size); + dev_dbg(host->dev, "fallback to PIO for data at 0x%p size %d\n", + host->pio_ptr, host->pio_size); return 1; } else { dma_addr_t phys_addr; @@ -354,6 +354,20 @@ static irqreturn_t mvsd_irq(int irq, void *dev) intr_status, mvsd_read(MVSD_NOR_INTR_EN), mvsd_read(MVSD_HW_STATE)); + /* + * It looks like, SDIO IP can issue one late, spurious irq + * although all irqs should be disabled. To work around this, + * bail out early, if we didn't expect any irqs to occur. + */ + if (!mvsd_read(MVSD_NOR_INTR_EN) && !mvsd_read(MVSD_ERR_INTR_EN)) { + dev_dbg(host->dev, "spurious irq detected intr 0x%04x intr_en 0x%04x erri 0x%04x erri_en 0x%04x\n", + mvsd_read(MVSD_NOR_INTR_STATUS), + mvsd_read(MVSD_NOR_INTR_EN), + mvsd_read(MVSD_ERR_INTR_STATUS), + mvsd_read(MVSD_ERR_INTR_EN)); + return IRQ_HANDLED; + } + spin_lock(&host->lock); /* PIO handling, if needed. Messy business... */ @@ -471,8 +485,8 @@ static irqreturn_t mvsd_irq(int irq, void *dev) if (mrq->data) err_status = mvsd_finish_data(host, mrq->data, err_status); if (err_status) { - printk(KERN_ERR "%s: unhandled error status %#04x\n", - mmc_hostname(host->mmc), err_status); + dev_err(host->dev, "unhandled error status %#04x\n", + err_status); cmd->error = -ENOMSG; } @@ -489,9 +503,8 @@ static irqreturn_t mvsd_irq(int irq, void *dev) if (irq_handled) return IRQ_HANDLED; - printk(KERN_ERR "%s: unhandled interrupt status=0x%04x en=0x%04x " - "pio=%d\n", mmc_hostname(host->mmc), intr_status, - host->intr_en, host->pio_size); + dev_err(host->dev, "unhandled interrupt status=0x%04x en=0x%04x pio=%d\n", + intr_status, host->intr_en, host->pio_size); return IRQ_NONE; } @@ -505,13 +518,11 @@ static void mvsd_timeout_timer(unsigned long data) spin_lock_irqsave(&host->lock, flags); mrq = host->mrq; if (mrq) { - printk(KERN_ERR "%s: Timeout waiting for hardware interrupt.\n", - mmc_hostname(host->mmc)); - printk(KERN_ERR "%s: hw_state=0x%04x, intr_status=0x%04x " - "intr_en=0x%04x\n", mmc_hostname(host->mmc), - mvsd_read(MVSD_HW_STATE), - mvsd_read(MVSD_NOR_INTR_STATUS), - mvsd_read(MVSD_NOR_INTR_EN)); + dev_err(host->dev, "Timeout waiting for hardware interrupt.\n"); + dev_err(host->dev, "hw_state=0x%04x, intr_status=0x%04x intr_en=0x%04x\n", + mvsd_read(MVSD_HW_STATE), + mvsd_read(MVSD_NOR_INTR_STATUS), + mvsd_read(MVSD_NOR_INTR_EN)); host->mrq = NULL; @@ -538,13 +549,6 @@ static void mvsd_timeout_timer(unsigned long data) mmc_request_done(host->mmc, mrq); } -static irqreturn_t mvsd_card_detect_irq(int irq, void *dev) -{ - struct mvsd_host *host = dev; - mmc_detect_change(host->mmc, msecs_to_jiffies(100)); - return IRQ_HANDLED; -} - static void mvsd_enable_sdio_irq(struct mmc_host *mmc, int enable) { struct mvsd_host *host = mmc_priv(mmc); @@ -564,20 +568,6 @@ static void mvsd_enable_sdio_irq(struct mmc_host *mmc, int enable) spin_unlock_irqrestore(&host->lock, flags); } -static int mvsd_get_ro(struct mmc_host *mmc) -{ - struct mvsd_host *host = mmc_priv(mmc); - - if (host->gpio_write_protect) - return gpio_get_value(host->gpio_write_protect); - - /* - * Board doesn't support read only detection; let the mmc core - * decide what to do. - */ - return -ENOSYS; -} - static void mvsd_power_up(struct mvsd_host *host) { void __iomem *iobase = host->base; @@ -674,13 +664,14 @@ static void mvsd_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) static const struct mmc_host_ops mvsd_ops = { .request = mvsd_request, - .get_ro = mvsd_get_ro, + .get_ro = mmc_gpio_get_ro, .set_ios = mvsd_set_ios, .enable_sdio_irq = mvsd_enable_sdio_irq, }; -static void __init mv_conf_mbus_windows(struct mvsd_host *host, - struct mbus_dram_target_info *dram) +static void +mv_conf_mbus_windows(struct mvsd_host *host, + const struct mbus_dram_target_info *dram) { void __iomem *iobase = host->base; int i; @@ -691,7 +682,7 @@ static void __init mv_conf_mbus_windows(struct mvsd_host *host, } for (i = 0; i < dram->num_cs; i++) { - struct mbus_dram_window *cs = dram->cs + i; + const struct mbus_dram_window *cs = dram->cs + i; writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) | (dram->mbus_dram_target_id << 4) | 1, @@ -700,24 +691,21 @@ static void __init mv_conf_mbus_windows(struct mvsd_host *host, } } -static int __init mvsd_probe(struct platform_device *pdev) +static int mvsd_probe(struct platform_device *pdev) { + struct device_node *np = pdev->dev.of_node; struct mmc_host *mmc = NULL; struct mvsd_host *host = NULL; - const struct mvsdio_platform_data *mvsd_data; + const struct mbus_dram_target_info *dram; struct resource *r; int ret, irq; + struct pinctrl *pinctrl; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_irq(pdev, 0); - mvsd_data = pdev->dev.platform_data; - if (!r || irq < 0 || !mvsd_data) + if (!r || irq < 0) return -ENXIO; - r = request_mem_region(r->start, SZ_1K, DRIVER_NAME); - if (!r) - return -EBUSY; - mmc = mmc_alloc_host(sizeof(struct mvsd_host), &pdev->dev); if (!mmc) { ret = -ENOMEM; @@ -727,17 +715,28 @@ static int __init mvsd_probe(struct platform_device *pdev) host = mmc_priv(mmc); host->mmc = mmc; host->dev = &pdev->dev; - host->res = r; - host->base_clock = mvsd_data->clock / 2; + + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) + dev_warn(&pdev->dev, "no pins associated\n"); + + /* + * Some non-DT platforms do not pass a clock, and the clock + * frequency is passed through platform_data. On DT platforms, + * a clock must always be passed, even if there is no gatable + * clock associated to the SDIO interface (it can simply be a + * fixed rate clock). + */ + host->clk = devm_clk_get(&pdev->dev, NULL); + if (!IS_ERR(host->clk)) + clk_prepare_enable(host->clk); mmc->ops = &mvsd_ops; mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; - mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ | - MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED; mmc->f_min = DIV_ROUND_UP(host->base_clock, MVSD_BASE_DIV_MAX); - mmc->f_max = maxfreq; + mmc->f_max = MVSD_CLOCKRATE_MAX; mmc->max_blk_size = 2048; mmc->max_blk_count = 65535; @@ -746,54 +745,67 @@ static int __init mvsd_probe(struct platform_device *pdev) mmc->max_seg_size = mmc->max_blk_size * mmc->max_blk_count; mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; + if (np) { + if (IS_ERR(host->clk)) { + dev_err(&pdev->dev, "DT platforms must have a clock associated\n"); + ret = -EINVAL; + goto out; + } + + host->base_clock = clk_get_rate(host->clk) / 2; + ret = mmc_of_parse(mmc); + if (ret < 0) + goto out; + } else { + const struct mvsdio_platform_data *mvsd_data; + + mvsd_data = pdev->dev.platform_data; + if (!mvsd_data) { + ret = -ENXIO; + goto out; + } + mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ | + MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED; + host->base_clock = mvsd_data->clock / 2; + /* GPIO 0 regarded as invalid for backward compatibility */ + if (mvsd_data->gpio_card_detect && + gpio_is_valid(mvsd_data->gpio_card_detect)) { + ret = mmc_gpio_request_cd(mmc, + mvsd_data->gpio_card_detect, + 0); + if (ret) + goto out; + } else { + mmc->caps |= MMC_CAP_NEEDS_POLL; + } + + if (mvsd_data->gpio_write_protect && + gpio_is_valid(mvsd_data->gpio_write_protect)) + mmc_gpio_request_ro(mmc, mvsd_data->gpio_write_protect); + } + + if (maxfreq) + mmc->f_max = maxfreq; + spin_lock_init(&host->lock); - host->base = ioremap(r->start, SZ_4K); - if (!host->base) { - ret = -ENOMEM; + host->base = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(host->base)) { + ret = PTR_ERR(host->base); goto out; } /* (Re-)program MBUS remapping windows if we are asked to. */ - if (mvsd_data->dram != NULL) - mv_conf_mbus_windows(host, mvsd_data->dram); + dram = mv_mbus_dram_info(); + if (dram) + mv_conf_mbus_windows(host, dram); mvsd_power_down(host); - ret = request_irq(irq, mvsd_irq, 0, DRIVER_NAME, host); + ret = devm_request_irq(&pdev->dev, irq, mvsd_irq, 0, DRIVER_NAME, host); if (ret) { - printk(KERN_ERR "%s: cannot assign irq %d\n", DRIVER_NAME, irq); + dev_err(&pdev->dev, "cannot assign irq %d\n", irq); goto out; - } else - host->irq = irq; - - if (mvsd_data->gpio_card_detect) { - ret = gpio_request(mvsd_data->gpio_card_detect, - DRIVER_NAME " cd"); - if (ret == 0) { - gpio_direction_input(mvsd_data->gpio_card_detect); - irq = gpio_to_irq(mvsd_data->gpio_card_detect); - ret = request_irq(irq, mvsd_card_detect_irq, - IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING, - DRIVER_NAME " cd", host); - if (ret == 0) - host->gpio_card_detect = - mvsd_data->gpio_card_detect; - else - gpio_free(mvsd_data->gpio_card_detect); - } - } - if (!host->gpio_card_detect) - mmc->caps |= MMC_CAP_NEEDS_POLL; - - if (mvsd_data->gpio_write_protect) { - ret = gpio_request(mvsd_data->gpio_write_protect, - DRIVER_NAME " wp"); - if (ret == 0) { - gpio_direction_input(mvsd_data->gpio_write_protect); - host->gpio_write_protect = - mvsd_data->gpio_write_protect; - } } setup_timer(&host->timer, mvsd_timeout_timer, (unsigned long)host); @@ -802,109 +814,60 @@ static int __init mvsd_probe(struct platform_device *pdev) if (ret) goto out; - printk(KERN_NOTICE "%s: %s driver initialized, ", - mmc_hostname(mmc), DRIVER_NAME); - if (host->gpio_card_detect) - printk("using GPIO %d for card detection\n", - host->gpio_card_detect); + if (!(mmc->caps & MMC_CAP_NEEDS_POLL)) + dev_dbg(&pdev->dev, "using GPIO for card detection\n"); else - printk("lacking card detect (fall back to polling)\n"); + dev_dbg(&pdev->dev, "lacking card detect (fall back to polling)\n"); + return 0; out: - if (host) { - if (host->irq) - free_irq(host->irq, host); - if (host->gpio_card_detect) { - free_irq(gpio_to_irq(host->gpio_card_detect), host); - gpio_free(host->gpio_card_detect); - } - if (host->gpio_write_protect) - gpio_free(host->gpio_write_protect); - if (host->base) - iounmap(host->base); - } - if (r) - release_resource(r); - if (mmc) + if (mmc) { + mmc_gpio_free_cd(mmc); + mmc_gpio_free_ro(mmc); + if (!IS_ERR(host->clk)) + clk_disable_unprepare(host->clk); mmc_free_host(mmc); + } return ret; } -static int __exit mvsd_remove(struct platform_device *pdev) +static int mvsd_remove(struct platform_device *pdev) { struct mmc_host *mmc = platform_get_drvdata(pdev); - if (mmc) { - struct mvsd_host *host = mmc_priv(mmc); - - if (host->gpio_card_detect) { - free_irq(gpio_to_irq(host->gpio_card_detect), host); - gpio_free(host->gpio_card_detect); - } - mmc_remove_host(mmc); - free_irq(host->irq, host); - if (host->gpio_write_protect) - gpio_free(host->gpio_write_protect); - del_timer_sync(&host->timer); - mvsd_power_down(host); - iounmap(host->base); - release_resource(host->res); - mmc_free_host(mmc); - } - platform_set_drvdata(pdev, NULL); - return 0; -} + struct mvsd_host *host = mmc_priv(mmc); -#ifdef CONFIG_PM -static int mvsd_suspend(struct platform_device *dev, pm_message_t state) -{ - struct mmc_host *mmc = platform_get_drvdata(dev); - int ret = 0; + mmc_gpio_free_cd(mmc); + mmc_gpio_free_ro(mmc); + mmc_remove_host(mmc); + del_timer_sync(&host->timer); + mvsd_power_down(host); - if (mmc) - ret = mmc_suspend_host(mmc); + if (!IS_ERR(host->clk)) + clk_disable_unprepare(host->clk); + mmc_free_host(mmc); - return ret; + return 0; } -static int mvsd_resume(struct platform_device *dev) -{ - struct mmc_host *mmc = platform_get_drvdata(dev); - int ret = 0; - - if (mmc) - ret = mmc_resume_host(mmc); - - return ret; -} -#else -#define mvsd_suspend NULL -#define mvsd_resume NULL -#endif +static const struct of_device_id mvsdio_dt_ids[] = { + { .compatible = "marvell,orion-sdio" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mvsdio_dt_ids); static struct platform_driver mvsd_driver = { - .remove = __exit_p(mvsd_remove), - .suspend = mvsd_suspend, - .resume = mvsd_resume, + .probe = mvsd_probe, + .remove = mvsd_remove, .driver = { .name = DRIVER_NAME, + .of_match_table = mvsdio_dt_ids, }, }; -static int __init mvsd_init(void) -{ - return platform_driver_probe(&mvsd_driver, mvsd_probe); -} - -static void __exit mvsd_exit(void) -{ - platform_driver_unregister(&mvsd_driver); -} - -module_init(mvsd_init); -module_exit(mvsd_exit); +module_platform_driver(mvsd_driver); /* maximum card clock frequency (default 50MHz) */ module_param(maxfreq, int, 0); diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index bdd2cbb87cb..ed1cb93c378 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -31,18 +31,23 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/regulator/consumer.h> +#include <linux/dmaengine.h> +#include <linux/types.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_dma.h> +#include <linux/of_gpio.h> +#include <linux/mmc/slot-gpio.h> #include <asm/dma.h> #include <asm/irq.h> -#include <asm/sizes.h> -#include <mach/mmc.h> +#include <linux/platform_data/mmc-mxcmmc.h> -#ifdef CONFIG_ARCH_MX2 -#include <mach/dma-mx1-mx2.h> -#define HAS_DMA -#endif +#include <linux/platform_data/dma-imx.h> #define DRIVER_NAME "mxc-mmc" +#define MXCMCI_TIMEOUT_MS 10000 #define MMC_REG_STR_STP_CLK 0x00 #define MMC_REG_STATUS 0x04 @@ -111,13 +116,19 @@ #define INT_WRITE_OP_DONE_EN (1 << 1) #define INT_READ_OP_EN (1 << 0) +enum mxcmci_type { + IMX21_MMC, + IMX31_MMC, + MPC512X_MMC, +}; + struct mxcmci_host { struct mmc_host *mmc; - struct resource *res; void __iomem *base; - int irq; + dma_addr_t phys_base; int detect_irq; - int dma; + struct dma_chan *dma; + struct dma_async_tx_descriptor *desc; int do_dma; int default_irq_mask; int use_sdio; @@ -128,23 +139,120 @@ struct mxcmci_host { struct mmc_command *cmd; struct mmc_data *data; - unsigned int dma_nents; unsigned int datasize; unsigned int dma_dir; u16 rev_no; unsigned int cmdat; - struct clk *clk; + struct clk *clk_ipg; + struct clk *clk_per; int clock; struct work_struct datawork; spinlock_t lock; + + int burstlen; + int dmareq; + struct dma_slave_config dma_slave_config; + struct imx_dma_data dma_data; + + struct timer_list watchdog; + enum mxcmci_type devtype; +}; + +static const struct platform_device_id mxcmci_devtype[] = { + { + .name = "imx21-mmc", + .driver_data = IMX21_MMC, + }, { + .name = "imx31-mmc", + .driver_data = IMX31_MMC, + }, { + .name = "mpc512x-sdhc", + .driver_data = MPC512X_MMC, + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(platform, mxcmci_devtype); + +static const struct of_device_id mxcmci_of_match[] = { + { + .compatible = "fsl,imx21-mmc", + .data = &mxcmci_devtype[IMX21_MMC], + }, { + .compatible = "fsl,imx31-mmc", + .data = &mxcmci_devtype[IMX31_MMC], + }, { + .compatible = "fsl,mpc5121-sdhc", + .data = &mxcmci_devtype[MPC512X_MMC], + }, { + /* sentinel */ + } }; +MODULE_DEVICE_TABLE(of, mxcmci_of_match); + +static inline int is_imx31_mmc(struct mxcmci_host *host) +{ + return host->devtype == IMX31_MMC; +} + +static inline int is_mpc512x_mmc(struct mxcmci_host *host) +{ + return host->devtype == MPC512X_MMC; +} + +static inline u32 mxcmci_readl(struct mxcmci_host *host, int reg) +{ + if (IS_ENABLED(CONFIG_PPC_MPC512x)) + return ioread32be(host->base + reg); + else + return readl(host->base + reg); +} + +static inline void mxcmci_writel(struct mxcmci_host *host, u32 val, int reg) +{ + if (IS_ENABLED(CONFIG_PPC_MPC512x)) + iowrite32be(val, host->base + reg); + else + writel(val, host->base + reg); +} + +static inline u16 mxcmci_readw(struct mxcmci_host *host, int reg) +{ + if (IS_ENABLED(CONFIG_PPC_MPC512x)) + return ioread32be(host->base + reg); + else + return readw(host->base + reg); +} + +static inline void mxcmci_writew(struct mxcmci_host *host, u16 val, int reg) +{ + if (IS_ENABLED(CONFIG_PPC_MPC512x)) + iowrite32be(val, host->base + reg); + else + writew(val, host->base + reg); +} static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios); +static void mxcmci_set_power(struct mxcmci_host *host, unsigned int vdd) +{ + if (!IS_ERR(host->mmc->supply.vmmc)) { + if (host->power_mode == MMC_POWER_UP) + mmc_regulator_set_ocr(host->mmc, + host->mmc->supply.vmmc, vdd); + else if (host->power_mode == MMC_POWER_OFF) + mmc_regulator_set_ocr(host->mmc, + host->mmc->supply.vmmc, 0); + } + + if (host->pdata && host->pdata->setpower) + host->pdata->setpower(mmc_dev(host->mmc), vdd); +} + static inline int mxcmci_use_dma(struct mxcmci_host *host) { return host->do_dma; @@ -157,39 +265,63 @@ static void mxcmci_softreset(struct mxcmci_host *host) dev_dbg(mmc_dev(host->mmc), "mxcmci_softreset\n"); /* reset sequence */ - writew(STR_STP_CLK_RESET, host->base + MMC_REG_STR_STP_CLK); - writew(STR_STP_CLK_RESET | STR_STP_CLK_START_CLK, - host->base + MMC_REG_STR_STP_CLK); + mxcmci_writew(host, STR_STP_CLK_RESET, MMC_REG_STR_STP_CLK); + mxcmci_writew(host, STR_STP_CLK_RESET | STR_STP_CLK_START_CLK, + MMC_REG_STR_STP_CLK); for (i = 0; i < 8; i++) - writew(STR_STP_CLK_START_CLK, host->base + MMC_REG_STR_STP_CLK); + mxcmci_writew(host, STR_STP_CLK_START_CLK, MMC_REG_STR_STP_CLK); + + mxcmci_writew(host, 0xff, MMC_REG_RES_TO); +} + +#if IS_ENABLED(CONFIG_PPC_MPC512x) +static inline void buffer_swap32(u32 *buf, int len) +{ + int i; + + for (i = 0; i < ((len + 3) / 4); i++) { + st_le32(buf, *buf); + buf++; + } +} + +static void mxcmci_swap_buffers(struct mmc_data *data) +{ + struct scatterlist *sg; + int i; - writew(0xff, host->base + MMC_REG_RES_TO); + for_each_sg(data->sg, sg, data->sg_len, i) + buffer_swap32(sg_virt(sg), sg->length); } +#else +static inline void mxcmci_swap_buffers(struct mmc_data *data) {} +#endif static int mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data) { unsigned int nob = data->blocks; unsigned int blksz = data->blksz; unsigned int datasize = nob * blksz; -#ifdef HAS_DMA struct scatterlist *sg; - int i; - int ret; -#endif + enum dma_transfer_direction slave_dirn; + int i, nents; + if (data->flags & MMC_DATA_STREAM) nob = 0xffff; host->data = data; data->bytes_xfered = 0; - writew(nob, host->base + MMC_REG_NOB); - writew(blksz, host->base + MMC_REG_BLK_LEN); + mxcmci_writew(host, nob, MMC_REG_NOB); + mxcmci_writew(host, blksz, MMC_REG_BLK_LEN); host->datasize = datasize; -#ifdef HAS_DMA + if (!mxcmci_use_dma(host)) + return 0; + for_each_sg(data->sg, sg, data->sg_len, i) { - if (sg->offset & 3 || sg->length & 3) { + if (sg->offset & 3 || sg->length & 3 || sg->length < 512) { host->do_dma = 0; return 0; } @@ -197,35 +329,60 @@ static int mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data) if (data->flags & MMC_DATA_READ) { host->dma_dir = DMA_FROM_DEVICE; - host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg, - data->sg_len, host->dma_dir); - - ret = imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, - datasize, - host->res->start + MMC_REG_BUFFER_ACCESS, - DMA_MODE_READ); + slave_dirn = DMA_DEV_TO_MEM; } else { host->dma_dir = DMA_TO_DEVICE; - host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg, - data->sg_len, host->dma_dir); + slave_dirn = DMA_MEM_TO_DEV; - ret = imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, - datasize, - host->res->start + MMC_REG_BUFFER_ACCESS, - DMA_MODE_WRITE); + mxcmci_swap_buffers(data); } - if (ret) { - dev_err(mmc_dev(host->mmc), "failed to setup DMA : %d\n", ret); - return ret; + nents = dma_map_sg(host->dma->device->dev, data->sg, + data->sg_len, host->dma_dir); + if (nents != data->sg_len) + return -EINVAL; + + host->desc = dmaengine_prep_slave_sg(host->dma, + data->sg, data->sg_len, slave_dirn, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + + if (!host->desc) { + dma_unmap_sg(host->dma->device->dev, data->sg, data->sg_len, + host->dma_dir); + host->do_dma = 0; + return 0; /* Fall back to PIO */ } wmb(); - imx_dma_enable(host->dma); -#endif /* HAS_DMA */ + dmaengine_submit(host->desc); + dma_async_issue_pending(host->dma); + + mod_timer(&host->watchdog, jiffies + msecs_to_jiffies(MXCMCI_TIMEOUT_MS)); + return 0; } +static void mxcmci_cmd_done(struct mxcmci_host *host, unsigned int stat); +static void mxcmci_data_done(struct mxcmci_host *host, unsigned int stat); + +static void mxcmci_dma_callback(void *data) +{ + struct mxcmci_host *host = data; + u32 stat; + + del_timer(&host->watchdog); + + stat = mxcmci_readl(host, MMC_REG_STATUS); + mxcmci_writel(host, stat & ~STATUS_DATA_TRANS_DONE, MMC_REG_STATUS); + + dev_dbg(mmc_dev(host->mmc), "%s: 0x%08x\n", __func__, stat); + + if (stat & STATUS_READ_OP_DONE) + mxcmci_writel(host, STATUS_READ_OP_DONE, MMC_REG_STATUS); + + mxcmci_data_done(host, stat); +} + static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd, unsigned int cmdat) { @@ -257,18 +414,24 @@ static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd, int_cntr = INT_END_CMD_RES_EN; - if (mxcmci_use_dma(host)) - int_cntr |= INT_READ_OP_EN | INT_WRITE_OP_DONE_EN; + if (mxcmci_use_dma(host)) { + if (host->dma_dir == DMA_FROM_DEVICE) { + host->desc->callback = mxcmci_dma_callback; + host->desc->callback_param = host; + } else { + int_cntr |= INT_WRITE_OP_DONE_EN; + } + } spin_lock_irqsave(&host->lock, flags); if (host->use_sdio) int_cntr |= INT_SDIO_IRQ_EN; - writel(int_cntr, host->base + MMC_REG_INT_CNTR); + mxcmci_writel(host, int_cntr, MMC_REG_INT_CNTR); spin_unlock_irqrestore(&host->lock, flags); - writew(cmd->opcode, host->base + MMC_REG_CMD); - writel(cmd->arg, host->base + MMC_REG_ARG); - writew(cmdat, host->base + MMC_REG_CMD_DAT_CONT); + mxcmci_writew(host, cmd->opcode, MMC_REG_CMD); + mxcmci_writel(host, cmd->arg, MMC_REG_ARG); + mxcmci_writew(host, cmdat, MMC_REG_CMD_DAT_CONT); return 0; } @@ -282,7 +445,7 @@ static void mxcmci_finish_request(struct mxcmci_host *host, spin_lock_irqsave(&host->lock, flags); if (host->use_sdio) int_cntr |= INT_SDIO_IRQ_EN; - writel(int_cntr, host->base + MMC_REG_INT_CNTR); + mxcmci_writel(host, int_cntr, MMC_REG_INT_CNTR); spin_unlock_irqrestore(&host->lock, flags); host->req = NULL; @@ -297,13 +460,11 @@ static int mxcmci_finish_data(struct mxcmci_host *host, unsigned int stat) struct mmc_data *data = host->data; int data_error; -#ifdef HAS_DMA if (mxcmci_use_dma(host)) { - imx_dma_disable(host->dma); - dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_nents, + dma_unmap_sg(host->dma->device->dev, data->sg, data->sg_len, host->dma_dir); + mxcmci_swap_buffers(data); } -#endif if (stat & STATUS_ERR_MASK) { dev_dbg(mmc_dev(host->mmc), "request failed. status: 0x%08x\n", @@ -361,14 +522,14 @@ static void mxcmci_read_response(struct mxcmci_host *host, unsigned int stat) if (cmd->flags & MMC_RSP_PRESENT) { if (cmd->flags & MMC_RSP_136) { for (i = 0; i < 4; i++) { - a = readw(host->base + MMC_REG_RES_FIFO); - b = readw(host->base + MMC_REG_RES_FIFO); + a = mxcmci_readw(host, MMC_REG_RES_FIFO); + b = mxcmci_readw(host, MMC_REG_RES_FIFO); cmd->resp[i] = a << 16 | b; } } else { - a = readw(host->base + MMC_REG_RES_FIFO); - b = readw(host->base + MMC_REG_RES_FIFO); - c = readw(host->base + MMC_REG_RES_FIFO); + a = mxcmci_readw(host, MMC_REG_RES_FIFO); + b = mxcmci_readw(host, MMC_REG_RES_FIFO); + c = mxcmci_readw(host, MMC_REG_RES_FIFO); cmd->resp[0] = a << 24 | b << 8 | c >> 8; } } @@ -380,7 +541,7 @@ static int mxcmci_poll_status(struct mxcmci_host *host, u32 mask) unsigned long timeout = jiffies + HZ; do { - stat = readl(host->base + MMC_REG_STATUS); + stat = mxcmci_readl(host, MMC_REG_STATUS); if (stat & STATUS_ERR_MASK) return stat; if (time_after(jiffies, timeout)) { @@ -404,7 +565,7 @@ static int mxcmci_pull(struct mxcmci_host *host, void *_buf, int bytes) STATUS_BUF_READ_RDY | STATUS_READ_OP_DONE); if (stat) return stat; - *buf++ = readl(host->base + MMC_REG_BUFFER_ACCESS); + *buf++ = cpu_to_le32(mxcmci_readl(host, MMC_REG_BUFFER_ACCESS)); bytes -= 4; } @@ -416,7 +577,7 @@ static int mxcmci_pull(struct mxcmci_host *host, void *_buf, int bytes) STATUS_BUF_READ_RDY | STATUS_READ_OP_DONE); if (stat) return stat; - tmp = readl(host->base + MMC_REG_BUFFER_ACCESS); + tmp = cpu_to_le32(mxcmci_readl(host, MMC_REG_BUFFER_ACCESS)); memcpy(b, &tmp, bytes); } @@ -432,7 +593,7 @@ static int mxcmci_push(struct mxcmci_host *host, void *_buf, int bytes) stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY); if (stat) return stat; - writel(*buf++, host->base + MMC_REG_BUFFER_ACCESS); + mxcmci_writel(host, cpu_to_le32(*buf++), MMC_REG_BUFFER_ACCESS); bytes -= 4; } @@ -445,7 +606,7 @@ static int mxcmci_push(struct mxcmci_host *host, void *_buf, int bytes) return stat; memcpy(&tmp, b, bytes); - writel(tmp, host->base + MMC_REG_BUFFER_ACCESS); + mxcmci_writel(host, cpu_to_le32(tmp), MMC_REG_BUFFER_ACCESS); } stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY); @@ -491,8 +652,8 @@ static void mxcmci_datawork(struct work_struct *work) datawork); int datastat = mxcmci_transfer_data(host); - writel(STATUS_READ_OP_DONE | STATUS_WRITE_OP_DONE, - host->base + MMC_REG_STATUS); + mxcmci_writel(host, STATUS_READ_OP_DONE | STATUS_WRITE_OP_DONE, + MMC_REG_STATUS); mxcmci_finish_data(host, datastat); if (host->req->stop) { @@ -505,30 +666,44 @@ static void mxcmci_datawork(struct work_struct *work) } } -#ifdef HAS_DMA static void mxcmci_data_done(struct mxcmci_host *host, unsigned int stat) { - struct mmc_data *data = host->data; + struct mmc_request *req; int data_error; + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + + if (!host->data) { + spin_unlock_irqrestore(&host->lock, flags); + return; + } - if (!data) + if (!host->req) { + spin_unlock_irqrestore(&host->lock, flags); return; + } + + req = host->req; + if (!req->stop) + host->req = NULL; /* we will handle finish req below */ data_error = mxcmci_finish_data(host, stat); + spin_unlock_irqrestore(&host->lock, flags); + mxcmci_read_response(host, stat); host->cmd = NULL; - if (host->req->stop) { - if (mxcmci_start_cmd(host, host->req->stop, 0)) { - mxcmci_finish_request(host, host->req); + if (req->stop) { + if (mxcmci_start_cmd(host, req->stop, 0)) { + mxcmci_finish_request(host, req); return; } } else { - mxcmci_finish_request(host, host->req); + mxcmci_finish_request(host, req); } } -#endif /* HAS_DMA */ static void mxcmci_cmd_done(struct mxcmci_host *host, unsigned int stat) { @@ -556,9 +731,11 @@ static irqreturn_t mxcmci_irq(int irq, void *devid) bool sdio_irq; u32 stat; - stat = readl(host->base + MMC_REG_STATUS); - writel(stat & ~(STATUS_SDIO_INT_ACTIVE | STATUS_DATA_TRANS_DONE | - STATUS_WRITE_OP_DONE), host->base + MMC_REG_STATUS); + stat = mxcmci_readl(host, MMC_REG_STATUS); + mxcmci_writel(host, + stat & ~(STATUS_SDIO_INT_ACTIVE | STATUS_DATA_TRANS_DONE | + STATUS_WRITE_OP_DONE), + MMC_REG_STATUS); dev_dbg(mmc_dev(host->mmc), "%s: 0x%08x\n", __func__, stat); @@ -566,29 +743,29 @@ static irqreturn_t mxcmci_irq(int irq, void *devid) sdio_irq = (stat & STATUS_SDIO_INT_ACTIVE) && host->use_sdio; spin_unlock_irqrestore(&host->lock, flags); -#ifdef HAS_DMA if (mxcmci_use_dma(host) && (stat & (STATUS_READ_OP_DONE | STATUS_WRITE_OP_DONE))) - writel(STATUS_READ_OP_DONE | STATUS_WRITE_OP_DONE, - host->base + MMC_REG_STATUS); -#endif + mxcmci_writel(host, STATUS_READ_OP_DONE | STATUS_WRITE_OP_DONE, + MMC_REG_STATUS); if (sdio_irq) { - writel(STATUS_SDIO_INT_ACTIVE, host->base + MMC_REG_STATUS); + mxcmci_writel(host, STATUS_SDIO_INT_ACTIVE, MMC_REG_STATUS); mmc_signal_sdio_irq(host->mmc); } if (stat & STATUS_END_CMD_RESP) mxcmci_cmd_done(host, stat); -#ifdef HAS_DMA if (mxcmci_use_dma(host) && - (stat & (STATUS_DATA_TRANS_DONE | STATUS_WRITE_OP_DONE))) + (stat & (STATUS_DATA_TRANS_DONE | STATUS_WRITE_OP_DONE))) { + del_timer(&host->watchdog); mxcmci_data_done(host, stat); -#endif + } + if (host->default_irq_mask && (stat & (STATUS_CARD_INSERTION | STATUS_CARD_REMOVAL))) mmc_detect_change(host->mmc, msecs_to_jiffies(200)); + return IRQ_HANDLED; } @@ -602,9 +779,10 @@ static void mxcmci_request(struct mmc_host *mmc, struct mmc_request *req) host->req = req; host->cmdat &= ~CMD_DAT_CONT_INIT; -#ifdef HAS_DMA - host->do_dma = 1; -#endif + + if (host->dma) + host->do_dma = 1; + if (req->data) { error = mxcmci_setup_data(host, req->data); if (error) { @@ -620,6 +798,7 @@ static void mxcmci_request(struct mmc_host *mmc, struct mmc_request *req) } error = mxcmci_start_cmd(host, req->cmd, cmdat); + out: if (error) mxcmci_finish_request(host, req); @@ -629,7 +808,7 @@ static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios) { unsigned int divider; int prescaler = 0; - unsigned int clk_in = clk_get_rate(host->clk); + unsigned int clk_in = clk_get_rate(host->clk_per); while (prescaler <= 0x800) { for (divider = 1; divider <= 0xF; divider++) { @@ -652,46 +831,72 @@ static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios) prescaler <<= 1; } - writew((prescaler << 4) | divider, host->base + MMC_REG_CLK_RATE); + mxcmci_writew(host, (prescaler << 4) | divider, MMC_REG_CLK_RATE); dev_dbg(mmc_dev(host->mmc), "scaler: %d divider: %d in: %d out: %d\n", prescaler, divider, clk_in, clk_ios); } +static int mxcmci_setup_dma(struct mmc_host *mmc) +{ + struct mxcmci_host *host = mmc_priv(mmc); + struct dma_slave_config *config = &host->dma_slave_config; + + config->dst_addr = host->phys_base + MMC_REG_BUFFER_ACCESS; + config->src_addr = host->phys_base + MMC_REG_BUFFER_ACCESS; + config->dst_addr_width = 4; + config->src_addr_width = 4; + config->dst_maxburst = host->burstlen; + config->src_maxburst = host->burstlen; + config->device_fc = false; + + return dmaengine_slave_config(host->dma, config); +} + static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) { struct mxcmci_host *host = mmc_priv(mmc); -#ifdef HAS_DMA - unsigned int blen; + int burstlen, ret; + /* - * use burstlen of 64 in 4 bit mode (--> reg value 0) - * use burstlen of 16 in 1 bit mode (--> reg value 16) + * use burstlen of 64 (16 words) in 4 bit mode (--> reg value 0) + * use burstlen of 16 (4 words) in 1 bit mode (--> reg value 16) */ if (ios->bus_width == MMC_BUS_WIDTH_4) - blen = 0; + burstlen = 16; else - blen = 16; + burstlen = 4; + + if (mxcmci_use_dma(host) && burstlen != host->burstlen) { + host->burstlen = burstlen; + ret = mxcmci_setup_dma(mmc); + if (ret) { + dev_err(mmc_dev(host->mmc), + "failed to config DMA channel. Falling back to PIO\n"); + dma_release_channel(host->dma); + host->do_dma = 0; + host->dma = NULL; + } + } - imx_dma_config_burstlen(host->dma, blen); -#endif if (ios->bus_width == MMC_BUS_WIDTH_4) host->cmdat |= CMD_DAT_CONT_BUS_WIDTH_4; else host->cmdat &= ~CMD_DAT_CONT_BUS_WIDTH_4; if (host->power_mode != ios->power_mode) { - if (host->pdata && host->pdata->setpower) - host->pdata->setpower(mmc_dev(mmc), ios->vdd); host->power_mode = ios->power_mode; + mxcmci_set_power(host, ios->vdd); + if (ios->power_mode == MMC_POWER_ON) host->cmdat |= CMD_DAT_CONT_INIT; } if (ios->clock) { mxcmci_set_clk_rate(host, ios->clock); - writew(STR_STP_CLK_START_CLK, host->base + MMC_REG_STR_STP_CLK); + mxcmci_writew(host, STR_STP_CLK_START_CLK, MMC_REG_STR_STP_CLK); } else { - writew(STR_STP_CLK_STOP_CLK, host->base + MMC_REG_STR_STP_CLK); + mxcmci_writew(host, STR_STP_CLK_STOP_CLK, MMC_REG_STR_STP_CLK); } host->clock = ios->clock; @@ -714,10 +919,11 @@ static int mxcmci_get_ro(struct mmc_host *mmc) if (host->pdata && host->pdata->get_ro) return !!host->pdata->get_ro(mmc_dev(mmc)); /* - * Board doesn't support read only detection; let the mmc core - * decide what to do. + * If board doesn't support read only detection (no mmc_gpio + * context or gpio is invalid), then let the mmc core decide + * what to do. */ - return -ENOSYS; + return mmc_gpio_get_ro(mmc); } static void mxcmci_enable_sdio_irq(struct mmc_host *mmc, int enable) @@ -728,19 +934,21 @@ static void mxcmci_enable_sdio_irq(struct mmc_host *mmc, int enable) spin_lock_irqsave(&host->lock, flags); host->use_sdio = enable; - int_cntr = readl(host->base + MMC_REG_INT_CNTR); + int_cntr = mxcmci_readl(host, MMC_REG_INT_CNTR); if (enable) int_cntr |= INT_SDIO_IRQ_EN; else int_cntr &= ~INT_SDIO_IRQ_EN; - writel(int_cntr, host->base + MMC_REG_INT_CNTR); + mxcmci_writel(host, int_cntr, MMC_REG_INT_CNTR); spin_unlock_irqrestore(&host->lock, flags); } static void mxcmci_init_card(struct mmc_host *host, struct mmc_card *card) { + struct mxcmci_host *mxcmci = mmc_priv(host); + /* * MX3 SoCs have a silicon bug which corrupts CRC calculation of * multi-block transfers when connected SDIO peripheral doesn't @@ -748,12 +956,53 @@ static void mxcmci_init_card(struct mmc_host *host, struct mmc_card *card) * One way to prevent this is to only allow 1-bit transfers. */ - if (cpu_is_mx3() && card->type == MMC_TYPE_SDIO) + if (is_imx31_mmc(mxcmci) && card->type == MMC_TYPE_SDIO) host->caps &= ~MMC_CAP_4_BIT_DATA; else host->caps |= MMC_CAP_4_BIT_DATA; } +static bool filter(struct dma_chan *chan, void *param) +{ + struct mxcmci_host *host = param; + + if (!imx_dma_is_general_purpose(chan)) + return false; + + chan->private = &host->dma_data; + + return true; +} + +static void mxcmci_watchdog(unsigned long data) +{ + struct mmc_host *mmc = (struct mmc_host *)data; + struct mxcmci_host *host = mmc_priv(mmc); + struct mmc_request *req = host->req; + unsigned int stat = mxcmci_readl(host, MMC_REG_STATUS); + + if (host->dma_dir == DMA_FROM_DEVICE) { + dmaengine_terminate_all(host->dma); + dev_err(mmc_dev(host->mmc), + "%s: read time out (status = 0x%08x)\n", + __func__, stat); + } else { + dev_err(mmc_dev(host->mmc), + "%s: write time out (status = 0x%08x)\n", + __func__, stat); + mxcmci_softreset(host); + } + + /* Mark transfer as erroneus and inform the upper layers */ + + if (host->data) + host->data->error = -ETIMEDOUT; + host->req = NULL; + host->cmd = NULL; + host->data = NULL; + mmc_request_done(host->mmc, req); +} + static const struct mmc_host_ops mxcmci_ops = { .request = mxcmci_request, .set_ios = mxcmci_set_ios, @@ -765,72 +1014,108 @@ static const struct mmc_host_ops mxcmci_ops = { static int mxcmci_probe(struct platform_device *pdev) { struct mmc_host *mmc; - struct mxcmci_host *host = NULL; - struct resource *iores, *r; + struct mxcmci_host *host; + struct resource *res; int ret = 0, irq; + bool dat3_card_detect = false; + dma_cap_mask_t mask; + const struct of_device_id *of_id; + struct imxmmc_platform_data *pdata = pdev->dev.platform_data; + + pr_info("i.MX/MPC512x SDHC driver\n"); - printk(KERN_INFO "i.MX SDHC driver\n"); + of_id = of_match_device(mxcmci_of_match, &pdev->dev); - iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_irq(pdev, 0); - if (!iores || irq < 0) + if (irq < 0) return -EINVAL; - r = request_mem_region(iores->start, resource_size(iores), pdev->name); - if (!r) - return -EBUSY; + mmc = mmc_alloc_host(sizeof(*host), &pdev->dev); + if (!mmc) + return -ENOMEM; + + host = mmc_priv(mmc); - mmc = mmc_alloc_host(sizeof(struct mxcmci_host), &pdev->dev); - if (!mmc) { - ret = -ENOMEM; - goto out_release_mem; + host->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(host->base)) { + ret = PTR_ERR(host->base); + goto out_free; } + host->phys_base = res->start; + + ret = mmc_of_parse(mmc); + if (ret) + goto out_free; mmc->ops = &mxcmci_ops; - mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; + + /* For devicetree parsing, the bus width is read from devicetree */ + if (pdata) + mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; + else + mmc->caps |= MMC_CAP_SDIO_IRQ; /* MMC core transfer sizes tunable parameters */ - mmc->max_segs = 64; mmc->max_blk_size = 2048; mmc->max_blk_count = 65535; mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; mmc->max_seg_size = mmc->max_req_size; - host = mmc_priv(mmc); - host->base = ioremap(r->start, resource_size(r)); - if (!host->base) { - ret = -ENOMEM; - goto out_free; + if (of_id) { + const struct platform_device_id *id_entry = of_id->data; + host->devtype = id_entry->driver_data; + } else { + host->devtype = pdev->id_entry->driver_data; } + /* adjust max_segs after devtype detection */ + if (!is_mpc512x_mmc(host)) + mmc->max_segs = 64; + host->mmc = mmc; - host->pdata = pdev->dev.platform_data; + host->pdata = pdata; spin_lock_init(&host->lock); - if (host->pdata && host->pdata->ocr_avail) - mmc->ocr_avail = host->pdata->ocr_avail; - else - mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + if (pdata) + dat3_card_detect = pdata->dat3_card_detect; + else if (!(mmc->caps & MMC_CAP_NONREMOVABLE) + && !of_property_read_bool(pdev->dev.of_node, "cd-gpios")) + dat3_card_detect = true; - if (host->pdata && host->pdata->dat3_card_detect) + ret = mmc_regulator_get_supply(mmc); + if (ret) { + if (pdata && ret != -EPROBE_DEFER) + mmc->ocr_avail = pdata->ocr_avail ? : + MMC_VDD_32_33 | MMC_VDD_33_34; + else + goto out_free; + } + + if (dat3_card_detect) host->default_irq_mask = INT_CARD_INSERTION_EN | INT_CARD_REMOVAL_EN; else host->default_irq_mask = 0; - host->res = r; - host->irq = irq; + host->clk_ipg = devm_clk_get(&pdev->dev, "ipg"); + if (IS_ERR(host->clk_ipg)) { + ret = PTR_ERR(host->clk_ipg); + goto out_free; + } - host->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(host->clk)) { - ret = PTR_ERR(host->clk); - goto out_iounmap; + host->clk_per = devm_clk_get(&pdev->dev, "per"); + if (IS_ERR(host->clk_per)) { + ret = PTR_ERR(host->clk_per); + goto out_free; } - clk_enable(host->clk); + + clk_prepare_enable(host->clk_per); + clk_prepare_enable(host->clk_ipg); mxcmci_softreset(host); - host->rev_no = readw(host->base + MMC_REG_REV_NO); + host->rev_no = mxcmci_readw(host, MMC_REG_REV_NO); if (host->rev_no != 0x400) { ret = -ENODEV; dev_err(mmc_dev(host->mmc), "wrong rev.no. 0x%08x. aborting.\n", @@ -838,40 +1123,38 @@ static int mxcmci_probe(struct platform_device *pdev) goto out_clk_put; } - mmc->f_min = clk_get_rate(host->clk) >> 16; - mmc->f_max = clk_get_rate(host->clk) >> 1; + mmc->f_min = clk_get_rate(host->clk_per) >> 16; + mmc->f_max = clk_get_rate(host->clk_per) >> 1; /* recommended in data sheet */ - writew(0x2db4, host->base + MMC_REG_READ_TO); - - writel(host->default_irq_mask, host->base + MMC_REG_INT_CNTR); + mxcmci_writew(host, 0x2db4, MMC_REG_READ_TO); -#ifdef HAS_DMA - host->dma = imx_dma_request_by_prio(DRIVER_NAME, DMA_PRIO_LOW); - if (host->dma < 0) { - dev_err(mmc_dev(host->mmc), "imx_dma_request_by_prio failed\n"); - ret = -EBUSY; - goto out_clk_put; - } + mxcmci_writel(host, host->default_irq_mask, MMC_REG_INT_CNTR); - r = platform_get_resource(pdev, IORESOURCE_DMA, 0); - if (!r) { - ret = -EINVAL; - goto out_free_dma; + if (!host->pdata) { + host->dma = dma_request_slave_channel(&pdev->dev, "rx-tx"); + } else { + res = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (res) { + host->dmareq = res->start; + host->dma_data.peripheral_type = IMX_DMATYPE_SDHC; + host->dma_data.priority = DMA_PRIO_LOW; + host->dma_data.dma_request = host->dmareq; + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + host->dma = dma_request_channel(mask, filter, host); + } } + if (host->dma) + mmc->max_seg_size = dma_get_max_seg_size( + host->dma->device->dev); + else + dev_info(mmc_dev(host->mmc), "dma not available. Using PIO\n"); - ret = imx_dma_config_channel(host->dma, - IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_FIFO, - IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR, - r->start, 0); - if (ret) { - dev_err(mmc_dev(host->mmc), "failed to config DMA channel\n"); - goto out_free_dma; - } -#endif INIT_WORK(&host->datawork, mxcmci_datawork); - ret = request_irq(host->irq, mxcmci_irq, 0, DRIVER_NAME, host); + ret = devm_request_irq(&pdev->dev, irq, mxcmci_irq, 0, + dev_name(&pdev->dev), host); if (ret) goto out_free_dma; @@ -881,28 +1164,28 @@ static int mxcmci_probe(struct platform_device *pdev) ret = host->pdata->init(&pdev->dev, mxcmci_detect_irq, host->mmc); if (ret) - goto out_free_irq; + goto out_free_dma; } + init_timer(&host->watchdog); + host->watchdog.function = &mxcmci_watchdog; + host->watchdog.data = (unsigned long)mmc; + mmc_add_host(mmc); return 0; -out_free_irq: - free_irq(host->irq, host); out_free_dma: -#ifdef HAS_DMA - imx_dma_free(host->dma); -#endif + if (host->dma) + dma_release_channel(host->dma); + out_clk_put: - clk_disable(host->clk); - clk_put(host->clk); -out_iounmap: - iounmap(host->base); + clk_disable_unprepare(host->clk_per); + clk_disable_unprepare(host->clk_ipg); + out_free: mmc_free_host(mmc); -out_release_mem: - release_mem_region(iores->start, resource_size(iores)); + return ret; } @@ -911,88 +1194,59 @@ static int mxcmci_remove(struct platform_device *pdev) struct mmc_host *mmc = platform_get_drvdata(pdev); struct mxcmci_host *host = mmc_priv(mmc); - platform_set_drvdata(pdev, NULL); - mmc_remove_host(mmc); if (host->pdata && host->pdata->exit) host->pdata->exit(&pdev->dev, mmc); - free_irq(host->irq, host); - iounmap(host->base); -#ifdef HAS_DMA - imx_dma_free(host->dma); -#endif - clk_disable(host->clk); - clk_put(host->clk); + if (host->dma) + dma_release_channel(host->dma); - release_mem_region(host->res->start, resource_size(host->res)); - release_resource(host->res); + clk_disable_unprepare(host->clk_per); + clk_disable_unprepare(host->clk_ipg); mmc_free_host(mmc); return 0; } -#ifdef CONFIG_PM -static int mxcmci_suspend(struct device *dev) +static int __maybe_unused mxcmci_suspend(struct device *dev) { struct mmc_host *mmc = dev_get_drvdata(dev); struct mxcmci_host *host = mmc_priv(mmc); - int ret = 0; - - if (mmc) - ret = mmc_suspend_host(mmc); - clk_disable(host->clk); - return ret; + clk_disable_unprepare(host->clk_per); + clk_disable_unprepare(host->clk_ipg); + return 0; } -static int mxcmci_resume(struct device *dev) +static int __maybe_unused mxcmci_resume(struct device *dev) { struct mmc_host *mmc = dev_get_drvdata(dev); struct mxcmci_host *host = mmc_priv(mmc); - int ret = 0; - - clk_enable(host->clk); - if (mmc) - ret = mmc_resume_host(mmc); - return ret; + clk_prepare_enable(host->clk_per); + clk_prepare_enable(host->clk_ipg); + return 0; } -static const struct dev_pm_ops mxcmci_pm_ops = { - .suspend = mxcmci_suspend, - .resume = mxcmci_resume, -}; -#endif +static SIMPLE_DEV_PM_OPS(mxcmci_pm_ops, mxcmci_suspend, mxcmci_resume); static struct platform_driver mxcmci_driver = { .probe = mxcmci_probe, .remove = mxcmci_remove, + .id_table = mxcmci_devtype, .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, -#ifdef CONFIG_PM .pm = &mxcmci_pm_ops, -#endif + .of_match_table = mxcmci_of_match, } }; -static int __init mxcmci_init(void) -{ - return platform_driver_register(&mxcmci_driver); -} - -static void __exit mxcmci_exit(void) -{ - platform_driver_unregister(&mxcmci_driver); -} - -module_init(mxcmci_init); -module_exit(mxcmci_exit); +module_platform_driver(mxcmci_driver); MODULE_DESCRIPTION("i.MX Multimedia Card Interface Driver"); MODULE_AUTHOR("Sascha Hauer, Pengutronix"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:imx-mmc"); +MODULE_ALIAS("platform:mxc-mmc"); diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c new file mode 100644 index 00000000000..babfea03ba8 --- /dev/null +++ b/drivers/mmc/host/mxs-mmc.c @@ -0,0 +1,750 @@ +/* + * Portions copyright (C) 2003 Russell King, PXA MMCI Driver + * Portions copyright (C) 2004-2005 Pierre Ossman, W83L51xD SD/MMC driver + * + * Copyright 2008 Embedded Alley Solutions, Inc. + * Copyright 2009-2011 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <linux/dmaengine.h> +#include <linux/highmem.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/completion.h> +#include <linux/mmc/host.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/sdio.h> +#include <linux/mmc/slot-gpio.h> +#include <linux/gpio.h> +#include <linux/regulator/consumer.h> +#include <linux/module.h> +#include <linux/stmp_device.h> +#include <linux/spi/mxs-spi.h> + +#define DRIVER_NAME "mxs-mmc" + +#define MXS_MMC_IRQ_BITS (BM_SSP_CTRL1_SDIO_IRQ | \ + BM_SSP_CTRL1_RESP_ERR_IRQ | \ + BM_SSP_CTRL1_RESP_TIMEOUT_IRQ | \ + BM_SSP_CTRL1_DATA_TIMEOUT_IRQ | \ + BM_SSP_CTRL1_DATA_CRC_IRQ | \ + BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ | \ + BM_SSP_CTRL1_RECV_TIMEOUT_IRQ | \ + BM_SSP_CTRL1_FIFO_OVERRUN_IRQ) + +/* card detect polling timeout */ +#define MXS_MMC_DETECT_TIMEOUT (HZ/2) + +struct mxs_mmc_host { + struct mxs_ssp ssp; + + struct mmc_host *mmc; + struct mmc_request *mrq; + struct mmc_command *cmd; + struct mmc_data *data; + + unsigned char bus_width; + spinlock_t lock; + int sdio_irq_en; + bool broken_cd; +}; + +static int mxs_mmc_get_cd(struct mmc_host *mmc) +{ + struct mxs_mmc_host *host = mmc_priv(mmc); + struct mxs_ssp *ssp = &host->ssp; + int present, ret; + + if (host->broken_cd) + return -ENOSYS; + + ret = mmc_gpio_get_cd(mmc); + if (ret >= 0) + return ret; + + present = !(readl(ssp->base + HW_SSP_STATUS(ssp)) & + BM_SSP_STATUS_CARD_DETECT); + + if (mmc->caps2 & MMC_CAP2_CD_ACTIVE_HIGH) + present = !present; + + return present; +} + +static int mxs_mmc_reset(struct mxs_mmc_host *host) +{ + struct mxs_ssp *ssp = &host->ssp; + u32 ctrl0, ctrl1; + int ret; + + ret = stmp_reset_block(ssp->base); + if (ret) + return ret; + + ctrl0 = BM_SSP_CTRL0_IGNORE_CRC; + ctrl1 = BF_SSP(0x3, CTRL1_SSP_MODE) | + BF_SSP(0x7, CTRL1_WORD_LENGTH) | + BM_SSP_CTRL1_DMA_ENABLE | + BM_SSP_CTRL1_POLARITY | + BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN | + BM_SSP_CTRL1_DATA_CRC_IRQ_EN | + BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN | + BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN | + BM_SSP_CTRL1_RESP_ERR_IRQ_EN; + + writel(BF_SSP(0xffff, TIMING_TIMEOUT) | + BF_SSP(2, TIMING_CLOCK_DIVIDE) | + BF_SSP(0, TIMING_CLOCK_RATE), + ssp->base + HW_SSP_TIMING(ssp)); + + if (host->sdio_irq_en) { + ctrl0 |= BM_SSP_CTRL0_SDIO_IRQ_CHECK; + ctrl1 |= BM_SSP_CTRL1_SDIO_IRQ_EN; + } + + writel(ctrl0, ssp->base + HW_SSP_CTRL0); + writel(ctrl1, ssp->base + HW_SSP_CTRL1(ssp)); + return 0; +} + +static void mxs_mmc_start_cmd(struct mxs_mmc_host *host, + struct mmc_command *cmd); + +static void mxs_mmc_request_done(struct mxs_mmc_host *host) +{ + struct mmc_command *cmd = host->cmd; + struct mmc_data *data = host->data; + struct mmc_request *mrq = host->mrq; + struct mxs_ssp *ssp = &host->ssp; + + if (mmc_resp_type(cmd) & MMC_RSP_PRESENT) { + if (mmc_resp_type(cmd) & MMC_RSP_136) { + cmd->resp[3] = readl(ssp->base + HW_SSP_SDRESP0(ssp)); + cmd->resp[2] = readl(ssp->base + HW_SSP_SDRESP1(ssp)); + cmd->resp[1] = readl(ssp->base + HW_SSP_SDRESP2(ssp)); + cmd->resp[0] = readl(ssp->base + HW_SSP_SDRESP3(ssp)); + } else { + cmd->resp[0] = readl(ssp->base + HW_SSP_SDRESP0(ssp)); + } + } + + if (data) { + dma_unmap_sg(mmc_dev(host->mmc), data->sg, + data->sg_len, ssp->dma_dir); + /* + * If there was an error on any block, we mark all + * data blocks as being in error. + */ + if (!data->error) + data->bytes_xfered = data->blocks * data->blksz; + else + data->bytes_xfered = 0; + + host->data = NULL; + if (mrq->stop) { + mxs_mmc_start_cmd(host, mrq->stop); + return; + } + } + + host->mrq = NULL; + mmc_request_done(host->mmc, mrq); +} + +static void mxs_mmc_dma_irq_callback(void *param) +{ + struct mxs_mmc_host *host = param; + + mxs_mmc_request_done(host); +} + +static irqreturn_t mxs_mmc_irq_handler(int irq, void *dev_id) +{ + struct mxs_mmc_host *host = dev_id; + struct mmc_command *cmd = host->cmd; + struct mmc_data *data = host->data; + struct mxs_ssp *ssp = &host->ssp; + u32 stat; + + spin_lock(&host->lock); + + stat = readl(ssp->base + HW_SSP_CTRL1(ssp)); + writel(stat & MXS_MMC_IRQ_BITS, + ssp->base + HW_SSP_CTRL1(ssp) + STMP_OFFSET_REG_CLR); + + spin_unlock(&host->lock); + + if ((stat & BM_SSP_CTRL1_SDIO_IRQ) && (stat & BM_SSP_CTRL1_SDIO_IRQ_EN)) + mmc_signal_sdio_irq(host->mmc); + + if (stat & BM_SSP_CTRL1_RESP_TIMEOUT_IRQ) + cmd->error = -ETIMEDOUT; + else if (stat & BM_SSP_CTRL1_RESP_ERR_IRQ) + cmd->error = -EIO; + + if (data) { + if (stat & (BM_SSP_CTRL1_DATA_TIMEOUT_IRQ | + BM_SSP_CTRL1_RECV_TIMEOUT_IRQ)) + data->error = -ETIMEDOUT; + else if (stat & BM_SSP_CTRL1_DATA_CRC_IRQ) + data->error = -EILSEQ; + else if (stat & (BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ | + BM_SSP_CTRL1_FIFO_OVERRUN_IRQ)) + data->error = -EIO; + } + + return IRQ_HANDLED; +} + +static struct dma_async_tx_descriptor *mxs_mmc_prep_dma( + struct mxs_mmc_host *host, unsigned long flags) +{ + struct mxs_ssp *ssp = &host->ssp; + struct dma_async_tx_descriptor *desc; + struct mmc_data *data = host->data; + struct scatterlist * sgl; + unsigned int sg_len; + + if (data) { + /* data */ + dma_map_sg(mmc_dev(host->mmc), data->sg, + data->sg_len, ssp->dma_dir); + sgl = data->sg; + sg_len = data->sg_len; + } else { + /* pio */ + sgl = (struct scatterlist *) ssp->ssp_pio_words; + sg_len = SSP_PIO_NUM; + } + + desc = dmaengine_prep_slave_sg(ssp->dmach, + sgl, sg_len, ssp->slave_dirn, flags); + if (desc) { + desc->callback = mxs_mmc_dma_irq_callback; + desc->callback_param = host; + } else { + if (data) + dma_unmap_sg(mmc_dev(host->mmc), data->sg, + data->sg_len, ssp->dma_dir); + } + + return desc; +} + +static void mxs_mmc_bc(struct mxs_mmc_host *host) +{ + struct mxs_ssp *ssp = &host->ssp; + struct mmc_command *cmd = host->cmd; + struct dma_async_tx_descriptor *desc; + u32 ctrl0, cmd0, cmd1; + + ctrl0 = BM_SSP_CTRL0_ENABLE | BM_SSP_CTRL0_IGNORE_CRC; + cmd0 = BF_SSP(cmd->opcode, CMD0_CMD) | BM_SSP_CMD0_APPEND_8CYC; + cmd1 = cmd->arg; + + if (host->sdio_irq_en) { + ctrl0 |= BM_SSP_CTRL0_SDIO_IRQ_CHECK; + cmd0 |= BM_SSP_CMD0_CONT_CLKING_EN | BM_SSP_CMD0_SLOW_CLKING_EN; + } + + ssp->ssp_pio_words[0] = ctrl0; + ssp->ssp_pio_words[1] = cmd0; + ssp->ssp_pio_words[2] = cmd1; + ssp->dma_dir = DMA_NONE; + ssp->slave_dirn = DMA_TRANS_NONE; + desc = mxs_mmc_prep_dma(host, DMA_CTRL_ACK); + if (!desc) + goto out; + + dmaengine_submit(desc); + dma_async_issue_pending(ssp->dmach); + return; + +out: + dev_warn(mmc_dev(host->mmc), + "%s: failed to prep dma\n", __func__); +} + +static void mxs_mmc_ac(struct mxs_mmc_host *host) +{ + struct mxs_ssp *ssp = &host->ssp; + struct mmc_command *cmd = host->cmd; + struct dma_async_tx_descriptor *desc; + u32 ignore_crc, get_resp, long_resp; + u32 ctrl0, cmd0, cmd1; + + ignore_crc = (mmc_resp_type(cmd) & MMC_RSP_CRC) ? + 0 : BM_SSP_CTRL0_IGNORE_CRC; + get_resp = (mmc_resp_type(cmd) & MMC_RSP_PRESENT) ? + BM_SSP_CTRL0_GET_RESP : 0; + long_resp = (mmc_resp_type(cmd) & MMC_RSP_136) ? + BM_SSP_CTRL0_LONG_RESP : 0; + + ctrl0 = BM_SSP_CTRL0_ENABLE | ignore_crc | get_resp | long_resp; + cmd0 = BF_SSP(cmd->opcode, CMD0_CMD); + cmd1 = cmd->arg; + + if (host->sdio_irq_en) { + ctrl0 |= BM_SSP_CTRL0_SDIO_IRQ_CHECK; + cmd0 |= BM_SSP_CMD0_CONT_CLKING_EN | BM_SSP_CMD0_SLOW_CLKING_EN; + } + + ssp->ssp_pio_words[0] = ctrl0; + ssp->ssp_pio_words[1] = cmd0; + ssp->ssp_pio_words[2] = cmd1; + ssp->dma_dir = DMA_NONE; + ssp->slave_dirn = DMA_TRANS_NONE; + desc = mxs_mmc_prep_dma(host, DMA_CTRL_ACK); + if (!desc) + goto out; + + dmaengine_submit(desc); + dma_async_issue_pending(ssp->dmach); + return; + +out: + dev_warn(mmc_dev(host->mmc), + "%s: failed to prep dma\n", __func__); +} + +static unsigned short mxs_ns_to_ssp_ticks(unsigned clock_rate, unsigned ns) +{ + const unsigned int ssp_timeout_mul = 4096; + /* + * Calculate ticks in ms since ns are large numbers + * and might overflow + */ + const unsigned int clock_per_ms = clock_rate / 1000; + const unsigned int ms = ns / 1000; + const unsigned int ticks = ms * clock_per_ms; + const unsigned int ssp_ticks = ticks / ssp_timeout_mul; + + WARN_ON(ssp_ticks == 0); + return ssp_ticks; +} + +static void mxs_mmc_adtc(struct mxs_mmc_host *host) +{ + struct mmc_command *cmd = host->cmd; + struct mmc_data *data = cmd->data; + struct dma_async_tx_descriptor *desc; + struct scatterlist *sgl = data->sg, *sg; + unsigned int sg_len = data->sg_len; + unsigned int i; + + unsigned short dma_data_dir, timeout; + enum dma_transfer_direction slave_dirn; + unsigned int data_size = 0, log2_blksz; + unsigned int blocks = data->blocks; + + struct mxs_ssp *ssp = &host->ssp; + + u32 ignore_crc, get_resp, long_resp, read; + u32 ctrl0, cmd0, cmd1, val; + + ignore_crc = (mmc_resp_type(cmd) & MMC_RSP_CRC) ? + 0 : BM_SSP_CTRL0_IGNORE_CRC; + get_resp = (mmc_resp_type(cmd) & MMC_RSP_PRESENT) ? + BM_SSP_CTRL0_GET_RESP : 0; + long_resp = (mmc_resp_type(cmd) & MMC_RSP_136) ? + BM_SSP_CTRL0_LONG_RESP : 0; + + if (data->flags & MMC_DATA_WRITE) { + dma_data_dir = DMA_TO_DEVICE; + slave_dirn = DMA_MEM_TO_DEV; + read = 0; + } else { + dma_data_dir = DMA_FROM_DEVICE; + slave_dirn = DMA_DEV_TO_MEM; + read = BM_SSP_CTRL0_READ; + } + + ctrl0 = BF_SSP(host->bus_width, CTRL0_BUS_WIDTH) | + ignore_crc | get_resp | long_resp | + BM_SSP_CTRL0_DATA_XFER | read | + BM_SSP_CTRL0_WAIT_FOR_IRQ | + BM_SSP_CTRL0_ENABLE; + + cmd0 = BF_SSP(cmd->opcode, CMD0_CMD); + + /* get logarithm to base 2 of block size for setting register */ + log2_blksz = ilog2(data->blksz); + + /* + * take special care of the case that data size from data->sg + * is not equal to blocks x blksz + */ + for_each_sg(sgl, sg, sg_len, i) + data_size += sg->length; + + if (data_size != data->blocks * data->blksz) + blocks = 1; + + /* xfer count, block size and count need to be set differently */ + if (ssp_is_old(ssp)) { + ctrl0 |= BF_SSP(data_size, CTRL0_XFER_COUNT); + cmd0 |= BF_SSP(log2_blksz, CMD0_BLOCK_SIZE) | + BF_SSP(blocks - 1, CMD0_BLOCK_COUNT); + } else { + writel(data_size, ssp->base + HW_SSP_XFER_SIZE); + writel(BF_SSP(log2_blksz, BLOCK_SIZE_BLOCK_SIZE) | + BF_SSP(blocks - 1, BLOCK_SIZE_BLOCK_COUNT), + ssp->base + HW_SSP_BLOCK_SIZE); + } + + if ((cmd->opcode == MMC_STOP_TRANSMISSION) || + (cmd->opcode == SD_IO_RW_EXTENDED)) + cmd0 |= BM_SSP_CMD0_APPEND_8CYC; + + cmd1 = cmd->arg; + + if (host->sdio_irq_en) { + ctrl0 |= BM_SSP_CTRL0_SDIO_IRQ_CHECK; + cmd0 |= BM_SSP_CMD0_CONT_CLKING_EN | BM_SSP_CMD0_SLOW_CLKING_EN; + } + + /* set the timeout count */ + timeout = mxs_ns_to_ssp_ticks(ssp->clk_rate, data->timeout_ns); + val = readl(ssp->base + HW_SSP_TIMING(ssp)); + val &= ~(BM_SSP_TIMING_TIMEOUT); + val |= BF_SSP(timeout, TIMING_TIMEOUT); + writel(val, ssp->base + HW_SSP_TIMING(ssp)); + + /* pio */ + ssp->ssp_pio_words[0] = ctrl0; + ssp->ssp_pio_words[1] = cmd0; + ssp->ssp_pio_words[2] = cmd1; + ssp->dma_dir = DMA_NONE; + ssp->slave_dirn = DMA_TRANS_NONE; + desc = mxs_mmc_prep_dma(host, 0); + if (!desc) + goto out; + + /* append data sg */ + WARN_ON(host->data != NULL); + host->data = data; + ssp->dma_dir = dma_data_dir; + ssp->slave_dirn = slave_dirn; + desc = mxs_mmc_prep_dma(host, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) + goto out; + + dmaengine_submit(desc); + dma_async_issue_pending(ssp->dmach); + return; +out: + dev_warn(mmc_dev(host->mmc), + "%s: failed to prep dma\n", __func__); +} + +static void mxs_mmc_start_cmd(struct mxs_mmc_host *host, + struct mmc_command *cmd) +{ + host->cmd = cmd; + + switch (mmc_cmd_type(cmd)) { + case MMC_CMD_BC: + mxs_mmc_bc(host); + break; + case MMC_CMD_BCR: + mxs_mmc_ac(host); + break; + case MMC_CMD_AC: + mxs_mmc_ac(host); + break; + case MMC_CMD_ADTC: + mxs_mmc_adtc(host); + break; + default: + dev_warn(mmc_dev(host->mmc), + "%s: unknown MMC command\n", __func__); + break; + } +} + +static void mxs_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct mxs_mmc_host *host = mmc_priv(mmc); + + WARN_ON(host->mrq != NULL); + host->mrq = mrq; + mxs_mmc_start_cmd(host, mrq->cmd); +} + +static void mxs_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct mxs_mmc_host *host = mmc_priv(mmc); + + if (ios->bus_width == MMC_BUS_WIDTH_8) + host->bus_width = 2; + else if (ios->bus_width == MMC_BUS_WIDTH_4) + host->bus_width = 1; + else + host->bus_width = 0; + + if (ios->clock) + mxs_ssp_set_clk_rate(&host->ssp, ios->clock); +} + +static void mxs_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) +{ + struct mxs_mmc_host *host = mmc_priv(mmc); + struct mxs_ssp *ssp = &host->ssp; + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + + host->sdio_irq_en = enable; + + if (enable) { + writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK, + ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET); + writel(BM_SSP_CTRL1_SDIO_IRQ_EN, + ssp->base + HW_SSP_CTRL1(ssp) + STMP_OFFSET_REG_SET); + } else { + writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK, + ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR); + writel(BM_SSP_CTRL1_SDIO_IRQ_EN, + ssp->base + HW_SSP_CTRL1(ssp) + STMP_OFFSET_REG_CLR); + } + + spin_unlock_irqrestore(&host->lock, flags); + + if (enable && readl(ssp->base + HW_SSP_STATUS(ssp)) & + BM_SSP_STATUS_SDIO_IRQ) + mmc_signal_sdio_irq(host->mmc); + +} + +static const struct mmc_host_ops mxs_mmc_ops = { + .request = mxs_mmc_request, + .get_ro = mmc_gpio_get_ro, + .get_cd = mxs_mmc_get_cd, + .set_ios = mxs_mmc_set_ios, + .enable_sdio_irq = mxs_mmc_enable_sdio_irq, +}; + +static struct platform_device_id mxs_ssp_ids[] = { + { + .name = "imx23-mmc", + .driver_data = IMX23_SSP, + }, { + .name = "imx28-mmc", + .driver_data = IMX28_SSP, + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(platform, mxs_ssp_ids); + +static const struct of_device_id mxs_mmc_dt_ids[] = { + { .compatible = "fsl,imx23-mmc", .data = (void *) IMX23_SSP, }, + { .compatible = "fsl,imx28-mmc", .data = (void *) IMX28_SSP, }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mxs_mmc_dt_ids); + +static int mxs_mmc_probe(struct platform_device *pdev) +{ + const struct of_device_id *of_id = + of_match_device(mxs_mmc_dt_ids, &pdev->dev); + struct device_node *np = pdev->dev.of_node; + struct mxs_mmc_host *host; + struct mmc_host *mmc; + struct resource *iores; + int ret = 0, irq_err; + struct regulator *reg_vmmc; + struct mxs_ssp *ssp; + + iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); + irq_err = platform_get_irq(pdev, 0); + if (!iores || irq_err < 0) + return -EINVAL; + + mmc = mmc_alloc_host(sizeof(struct mxs_mmc_host), &pdev->dev); + if (!mmc) + return -ENOMEM; + + host = mmc_priv(mmc); + ssp = &host->ssp; + ssp->dev = &pdev->dev; + ssp->base = devm_ioremap_resource(&pdev->dev, iores); + if (IS_ERR(ssp->base)) { + ret = PTR_ERR(ssp->base); + goto out_mmc_free; + } + + ssp->devid = (enum mxs_ssp_id) of_id->data; + + host->mmc = mmc; + host->sdio_irq_en = 0; + + reg_vmmc = devm_regulator_get(&pdev->dev, "vmmc"); + if (!IS_ERR(reg_vmmc)) { + ret = regulator_enable(reg_vmmc); + if (ret) { + dev_err(&pdev->dev, + "Failed to enable vmmc regulator: %d\n", ret); + goto out_mmc_free; + } + } + + ssp->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(ssp->clk)) { + ret = PTR_ERR(ssp->clk); + goto out_mmc_free; + } + clk_prepare_enable(ssp->clk); + + ret = mxs_mmc_reset(host); + if (ret) { + dev_err(&pdev->dev, "Failed to reset mmc: %d\n", ret); + goto out_clk_disable; + } + + ssp->dmach = dma_request_slave_channel(&pdev->dev, "rx-tx"); + if (!ssp->dmach) { + dev_err(mmc_dev(host->mmc), + "%s: failed to request dma\n", __func__); + ret = -ENODEV; + goto out_clk_disable; + } + + /* set mmc core parameters */ + mmc->ops = &mxs_mmc_ops; + mmc->caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED | + MMC_CAP_SDIO_IRQ | MMC_CAP_NEEDS_POLL; + + host->broken_cd = of_property_read_bool(np, "broken-cd"); + + mmc->f_min = 400000; + mmc->f_max = 288000000; + + ret = mmc_of_parse(mmc); + if (ret) + goto out_clk_disable; + + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + + mmc->max_segs = 52; + mmc->max_blk_size = 1 << 0xf; + mmc->max_blk_count = (ssp_is_old(ssp)) ? 0xff : 0xffffff; + mmc->max_req_size = (ssp_is_old(ssp)) ? 0xffff : 0xffffffff; + mmc->max_seg_size = dma_get_max_seg_size(ssp->dmach->device->dev); + + platform_set_drvdata(pdev, mmc); + + ret = devm_request_irq(&pdev->dev, irq_err, mxs_mmc_irq_handler, 0, + DRIVER_NAME, host); + if (ret) + goto out_free_dma; + + spin_lock_init(&host->lock); + + ret = mmc_add_host(mmc); + if (ret) + goto out_free_dma; + + dev_info(mmc_dev(host->mmc), "initialized\n"); + + return 0; + +out_free_dma: + if (ssp->dmach) + dma_release_channel(ssp->dmach); +out_clk_disable: + clk_disable_unprepare(ssp->clk); +out_mmc_free: + mmc_free_host(mmc); + return ret; +} + +static int mxs_mmc_remove(struct platform_device *pdev) +{ + struct mmc_host *mmc = platform_get_drvdata(pdev); + struct mxs_mmc_host *host = mmc_priv(mmc); + struct mxs_ssp *ssp = &host->ssp; + + mmc_remove_host(mmc); + + if (ssp->dmach) + dma_release_channel(ssp->dmach); + + clk_disable_unprepare(ssp->clk); + + mmc_free_host(mmc); + + return 0; +} + +#ifdef CONFIG_PM +static int mxs_mmc_suspend(struct device *dev) +{ + struct mmc_host *mmc = dev_get_drvdata(dev); + struct mxs_mmc_host *host = mmc_priv(mmc); + struct mxs_ssp *ssp = &host->ssp; + + clk_disable_unprepare(ssp->clk); + return 0; +} + +static int mxs_mmc_resume(struct device *dev) +{ + struct mmc_host *mmc = dev_get_drvdata(dev); + struct mxs_mmc_host *host = mmc_priv(mmc); + struct mxs_ssp *ssp = &host->ssp; + + clk_prepare_enable(ssp->clk); + return 0; +} + +static const struct dev_pm_ops mxs_mmc_pm_ops = { + .suspend = mxs_mmc_suspend, + .resume = mxs_mmc_resume, +}; +#endif + +static struct platform_driver mxs_mmc_driver = { + .probe = mxs_mmc_probe, + .remove = mxs_mmc_remove, + .id_table = mxs_ssp_ids, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &mxs_mmc_pm_ops, +#endif + .of_match_table = mxs_mmc_dt_ids, + }, +}; + +module_platform_driver(mxs_mmc_driver); + +MODULE_DESCRIPTION("FREESCALE MXS MMC peripheral"); +MODULE_AUTHOR("Freescale Semiconductor"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/mmc/host/of_mmc_spi.c b/drivers/mmc/host/of_mmc_spi.c index 1247e5de9fa..6e218fb1a66 100644 --- a/drivers/mmc/host/of_mmc_spi.c +++ b/drivers/mmc/host/of_mmc_spi.c @@ -15,14 +15,21 @@ #include <linux/module.h> #include <linux/device.h> #include <linux/slab.h> +#include <linux/irq.h> #include <linux/gpio.h> #include <linux/of.h> #include <linux/of_gpio.h> +#include <linux/of_irq.h> #include <linux/spi/spi.h> #include <linux/spi/mmc_spi.h> #include <linux/mmc/core.h> #include <linux/mmc/host.h> +/* For archs that don't support NO_IRQ (such as mips), provide a dummy value */ +#ifndef NO_IRQ +#define NO_IRQ 0 +#endif + MODULE_LICENSE("GPL"); enum { @@ -34,6 +41,7 @@ enum { struct of_mmc_spi { int gpios[NUM_GPIOS]; bool alow_gpios[NUM_GPIOS]; + int detect_irq; struct mmc_spi_platform_data pdata; }; @@ -42,23 +50,20 @@ static struct of_mmc_spi *to_of_mmc_spi(struct device *dev) return container_of(dev->platform_data, struct of_mmc_spi, pdata); } -static int of_mmc_spi_read_gpio(struct device *dev, int gpio_num) +static int of_mmc_spi_init(struct device *dev, + irqreturn_t (*irqhandler)(int, void *), void *mmc) { struct of_mmc_spi *oms = to_of_mmc_spi(dev); - bool active_low = oms->alow_gpios[gpio_num]; - bool value = gpio_get_value(oms->gpios[gpio_num]); - return active_low ^ value; + return request_threaded_irq(oms->detect_irq, NULL, irqhandler, 0, + dev_name(dev), mmc); } -static int of_mmc_spi_get_cd(struct device *dev) +static void of_mmc_spi_exit(struct device *dev, void *mmc) { - return of_mmc_spi_read_gpio(dev, CD_GPIO); -} + struct of_mmc_spi *oms = to_of_mmc_spi(dev); -static int of_mmc_spi_get_ro(struct device *dev) -{ - return of_mmc_spi_read_gpio(dev, WP_GPIO); + free_irq(oms->detect_irq, mmc); } struct mmc_spi_platform_data *mmc_spi_get_pdata(struct spi_device *spi) @@ -89,8 +94,8 @@ struct mmc_spi_platform_data *mmc_spi_get_pdata(struct spi_device *spi) const int j = i * 2; u32 mask; - mask = mmc_vddrange_to_ocrmask(voltage_ranges[j], - voltage_ranges[j + 1]); + mask = mmc_vddrange_to_ocrmask(be32_to_cpu(voltage_ranges[j]), + be32_to_cpu(voltage_ranges[j + 1])); if (!mask) { ret = -EINVAL; dev_err(dev, "OF: voltage-range #%d is invalid\n", i); @@ -106,23 +111,30 @@ struct mmc_spi_platform_data *mmc_spi_get_pdata(struct spi_device *spi) if (!gpio_is_valid(oms->gpios[i])) continue; - ret = gpio_request(oms->gpios[i], dev_name(dev)); - if (ret < 0) { - oms->gpios[i] = -EINVAL; - continue; - } - if (gpio_flags & OF_GPIO_ACTIVE_LOW) oms->alow_gpios[i] = true; } - if (gpio_is_valid(oms->gpios[CD_GPIO])) - oms->pdata.get_cd = of_mmc_spi_get_cd; - if (gpio_is_valid(oms->gpios[WP_GPIO])) - oms->pdata.get_ro = of_mmc_spi_get_ro; + if (gpio_is_valid(oms->gpios[CD_GPIO])) { + oms->pdata.cd_gpio = oms->gpios[CD_GPIO]; + oms->pdata.flags |= MMC_SPI_USE_CD_GPIO; + if (!oms->alow_gpios[CD_GPIO]) + oms->pdata.caps2 |= MMC_CAP2_CD_ACTIVE_HIGH; + } + if (gpio_is_valid(oms->gpios[WP_GPIO])) { + oms->pdata.ro_gpio = oms->gpios[WP_GPIO]; + oms->pdata.flags |= MMC_SPI_USE_RO_GPIO; + if (!oms->alow_gpios[WP_GPIO]) + oms->pdata.caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; + } - /* We don't support interrupts yet, let's poll. */ - oms->pdata.caps |= MMC_CAP_NEEDS_POLL; + oms->detect_irq = irq_of_parse_and_map(np, 0); + if (oms->detect_irq != 0) { + oms->pdata.init = of_mmc_spi_init; + oms->pdata.exit = of_mmc_spi_exit; + } else { + oms->pdata.caps |= MMC_CAP_NEEDS_POLL; + } dev->platform_data = &oms->pdata; return dev->platform_data; @@ -137,15 +149,10 @@ void mmc_spi_put_pdata(struct spi_device *spi) struct device *dev = &spi->dev; struct device_node *np = dev->of_node; struct of_mmc_spi *oms = to_of_mmc_spi(dev); - int i; if (!dev->platform_data || !np) return; - for (i = 0; i < ARRAY_SIZE(oms->gpios); i++) { - if (gpio_is_valid(oms->gpios[i])) - gpio_free(oms->gpios[i]); - } kfree(oms); dev->platform_data = NULL; } diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 0c7e37f496e..81974ecdfcb 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -2,7 +2,7 @@ * linux/drivers/mmc/host/omap.c * * Copyright (C) 2004 Nokia Corporation - * Written by Tuukka Tikkanen and Juha Yrjölä<juha.yrjola@nokia.com> + * Written by Tuukka Tikkanen and Juha Yrjölä<juha.yrjola@nokia.com> * Misc hacks here and there by Tony Lindgren <tony@atomide.com> * Other hacks (DMA, SD, etc) by David Brownell * @@ -17,26 +17,21 @@ #include <linux/ioport.h> #include <linux/platform_device.h> #include <linux/interrupt.h> +#include <linux/dmaengine.h> #include <linux/dma-mapping.h> #include <linux/delay.h> #include <linux/spinlock.h> #include <linux/timer.h> +#include <linux/of.h> +#include <linux/omap-dma.h> #include <linux/mmc/host.h> #include <linux/mmc/card.h> +#include <linux/mmc/mmc.h> #include <linux/clk.h> #include <linux/scatterlist.h> -#include <linux/i2c/tps65010.h> #include <linux/slab.h> +#include <linux/platform_data/mmc-omap.h> -#include <asm/io.h> -#include <asm/irq.h> - -#include <plat/board.h> -#include <plat/mmc.h> -#include <mach/gpio.h> -#include <plat/dma.h> -#include <plat/mux.h> -#include <plat/fpga.h> #define OMAP_MMC_REG_CMD 0x00 #define OMAP_MMC_REG_ARGL 0x01 @@ -78,6 +73,13 @@ #define OMAP_MMC_STAT_CARD_BUSY (1 << 2) #define OMAP_MMC_STAT_END_OF_CMD (1 << 0) +#define mmc_omap7xx() (host->features & MMC_OMAP7XX) +#define mmc_omap15xx() (host->features & MMC_OMAP15XX) +#define mmc_omap16xx() (host->features & MMC_OMAP16XX) +#define MMC_OMAP1_MASK (MMC_OMAP7XX | MMC_OMAP15XX | MMC_OMAP16XX) +#define mmc_omap1() (host->features & MMC_OMAP1_MASK) +#define mmc_omap2() (!mmc_omap1()) + #define OMAP_MMC_REG(host, reg) (OMAP_MMC_REG_##reg << (host)->reg_shift) #define OMAP_MMC_READ(host, reg) __raw_readw((host)->virt_base + OMAP_MMC_REG(host, reg)) #define OMAP_MMC_WRITE(host, reg, val) __raw_writew((val), (host)->virt_base + OMAP_MMC_REG(host, reg)) @@ -90,7 +92,6 @@ #define OMAP_MMC_CMDTYPE_AC 2 #define OMAP_MMC_CMDTYPE_ADTC 3 - #define DRIVER_NAME "mmci-omap" /* Specifies how often in millisecs to poll for card status changes @@ -105,7 +106,6 @@ struct mmc_omap_slot { u16 saved_con; u16 bus_mode; unsigned int fclk_freq; - unsigned powered:1; struct tasklet_struct cover_tasklet; struct timer_list cover_timer; @@ -119,7 +119,6 @@ struct mmc_omap_slot { struct mmc_omap_host { int initialized; - int suspended; struct mmc_request * mrq; struct mmc_command * cmd; struct mmc_data * data; @@ -128,12 +127,14 @@ struct mmc_omap_host { unsigned char id; /* 16xx chips have 2 MMC blocks */ struct clk * iclk; struct clk * fclk; - struct resource *mem_res; + struct dma_chan *dma_rx; + u32 dma_rx_burst; + struct dma_chan *dma_tx; + u32 dma_tx_burst; void __iomem *virt_base; unsigned int phys_base; int irq; unsigned char bus_mode; - unsigned char hw_bus_mode; unsigned int reg_shift; struct work_struct cmd_abort_work; @@ -151,14 +152,10 @@ struct mmc_omap_host { u32 buffer_bytes_left; u32 total_bytes_left; - unsigned use_dma:1; + unsigned features; unsigned brs_received:1, dma_done:1; - unsigned dma_is_read:1; unsigned dma_in_use:1; - int dma_ch; spinlock_t dma_lock; - struct timer_list dma_timer; - unsigned dma_len; struct mmc_omap_slot *slots[OMAP_MMC_MAX_SLOTS]; struct mmc_omap_slot *current_slot; @@ -169,16 +166,18 @@ struct mmc_omap_host { struct timer_list clk_timer; spinlock_t clk_lock; /* for changing enabled state */ unsigned int fclk_enabled:1; + struct workqueue_struct *mmc_omap_wq; struct omap_mmc_platform_data *pdata; }; + static void mmc_omap_fclk_offdelay(struct mmc_omap_slot *slot) { unsigned long tick_ns; if (slot != NULL && slot->host->fclk_enabled && slot->fclk_freq > 0) { - tick_ns = (1000000000 + slot->fclk_freq - 1) / slot->fclk_freq; + tick_ns = DIV_ROUND_UP(NSEC_PER_SEC, slot->fclk_freq); ndelay(8 * tick_ns); } } @@ -289,7 +288,7 @@ static void mmc_omap_release_slot(struct mmc_omap_slot *slot, int clk_enabled) host->next_slot = new_slot; host->mmc = new_slot->mmc; spin_unlock_irqrestore(&host->slot_lock, flags); - schedule_work(&host->slot_release_work); + queue_work(host->mmc_omap_wq, &host->slot_release_work); return; } @@ -338,6 +337,7 @@ mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd) u32 cmdreg; u32 resptype; u32 cmdtype; + u16 irq_mask; host->cmd = cmd; @@ -390,12 +390,14 @@ mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd) OMAP_MMC_WRITE(host, CTO, 200); OMAP_MMC_WRITE(host, ARGL, cmd->arg & 0xffff); OMAP_MMC_WRITE(host, ARGH, cmd->arg >> 16); - OMAP_MMC_WRITE(host, IE, - OMAP_MMC_STAT_A_EMPTY | OMAP_MMC_STAT_A_FULL | - OMAP_MMC_STAT_CMD_CRC | OMAP_MMC_STAT_CMD_TOUT | - OMAP_MMC_STAT_DATA_CRC | OMAP_MMC_STAT_DATA_TOUT | - OMAP_MMC_STAT_END_OF_CMD | OMAP_MMC_STAT_CARD_ERR | - OMAP_MMC_STAT_END_OF_DATA); + irq_mask = OMAP_MMC_STAT_A_EMPTY | OMAP_MMC_STAT_A_FULL | + OMAP_MMC_STAT_CMD_CRC | OMAP_MMC_STAT_CMD_TOUT | + OMAP_MMC_STAT_DATA_CRC | OMAP_MMC_STAT_DATA_TOUT | + OMAP_MMC_STAT_END_OF_CMD | OMAP_MMC_STAT_CARD_ERR | + OMAP_MMC_STAT_END_OF_DATA; + if (cmd->opcode == MMC_ERASE) + irq_mask &= ~OMAP_MMC_STAT_DATA_TOUT; + OMAP_MMC_WRITE(host, IE, irq_mask); OMAP_MMC_WRITE(host, CMD, cmdreg); } @@ -404,18 +406,25 @@ mmc_omap_release_dma(struct mmc_omap_host *host, struct mmc_data *data, int abort) { enum dma_data_direction dma_data_dir; + struct device *dev = mmc_dev(host->mmc); + struct dma_chan *c; - BUG_ON(host->dma_ch < 0); - if (data->error) - omap_stop_dma(host->dma_ch); - /* Release DMA channel lazily */ - mod_timer(&host->dma_timer, jiffies + HZ); - if (data->flags & MMC_DATA_WRITE) + if (data->flags & MMC_DATA_WRITE) { dma_data_dir = DMA_TO_DEVICE; - else + c = host->dma_tx; + } else { dma_data_dir = DMA_FROM_DEVICE; - dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->sg_len, - dma_data_dir); + c = host->dma_rx; + } + if (c) { + if (data->error) { + dmaengine_terminate_all(c); + /* Claim nothing transferred on error... */ + data->bytes_xfered = 0; + } + dev = c->device->dev; + } + dma_unmap_sg(dev, data->sg, host->sg_len, dma_data_dir); } static void mmc_omap_send_stop_work(struct work_struct *work) @@ -426,7 +435,7 @@ static void mmc_omap_send_stop_work(struct work_struct *work) struct mmc_data *data = host->stop_data; unsigned long tick_ns; - tick_ns = (1000000000 + slot->fclk_freq - 1)/slot->fclk_freq; + tick_ns = DIV_ROUND_UP(NSEC_PER_SEC, slot->fclk_freq); ndelay(8*tick_ns); mmc_omap_start_command(host, data->stop); @@ -457,7 +466,7 @@ mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data) } host->stop_data = data; - schedule_work(&host->send_stop_work); + queue_work(host->mmc_omap_wq, &host->send_stop_work); } static void @@ -468,7 +477,7 @@ mmc_omap_send_abort(struct mmc_omap_host *host, int maxloops) u16 stat = 0; /* Sending abort takes 80 clocks. Have some extra and round up */ - timeout = (120*1000000 + slot->fclk_freq - 1)/slot->fclk_freq; + timeout = DIV_ROUND_UP(120 * USEC_PER_SEC, slot->fclk_freq); restarts = 0; while (restarts < maxloops) { OMAP_MMC_WRITE(host, STAT, 0xFFFF); @@ -523,16 +532,6 @@ mmc_omap_end_of_data(struct mmc_omap_host *host, struct mmc_data *data) } static void -mmc_omap_dma_timer(unsigned long data) -{ - struct mmc_omap_host *host = (struct mmc_omap_host *) data; - - BUG_ON(host->dma_ch < 0); - omap_free_dma(host->dma_ch); - host->dma_ch = -1; -} - -static void mmc_omap_dma_done(struct mmc_omap_host *host, struct mmc_data *data) { unsigned long flags; @@ -637,7 +636,7 @@ mmc_omap_cmd_timer(unsigned long data) OMAP_MMC_WRITE(host, IE, 0); disable_irq(host->irq); host->abort = 1; - schedule_work(&host->cmd_abort_work); + queue_work(host->mmc_omap_wq, &host->cmd_abort_work); } spin_unlock_irqrestore(&host->slot_lock, flags); } @@ -667,7 +666,7 @@ mmc_omap_clk_timer(unsigned long data) static void mmc_omap_xfer_data(struct mmc_omap_host *host, int write) { - int n; + int n, nwords; if (host->buffer_bytes_left == 0) { host->sg_idx++; @@ -677,33 +676,48 @@ mmc_omap_xfer_data(struct mmc_omap_host *host, int write) n = 64; if (n > host->buffer_bytes_left) n = host->buffer_bytes_left; + + /* Round up to handle odd number of bytes to transfer */ + nwords = DIV_ROUND_UP(n, 2); + host->buffer_bytes_left -= n; host->total_bytes_left -= n; host->data->bytes_xfered += n; if (write) { - __raw_writesw(host->virt_base + OMAP_MMC_REG(host, DATA), host->buffer, n); + __raw_writesw(host->virt_base + OMAP_MMC_REG(host, DATA), + host->buffer, nwords); } else { - __raw_readsw(host->virt_base + OMAP_MMC_REG(host, DATA), host->buffer, n); + __raw_readsw(host->virt_base + OMAP_MMC_REG(host, DATA), + host->buffer, nwords); } + + host->buffer += nwords; } -static inline void mmc_omap_report_irq(u16 status) +#ifdef CONFIG_MMC_DEBUG +static void mmc_omap_report_irq(struct mmc_omap_host *host, u16 status) { static const char *mmc_omap_status_bits[] = { "EOC", "CD", "CB", "BRS", "EOFB", "DTO", "DCRC", "CTO", "CCRC", "CRW", "AF", "AE", "OCRB", "CIRQ", "CERR" }; - int i, c = 0; + int i; + char res[64], *buf = res; + + buf += sprintf(buf, "MMC IRQ 0x%x:", status); for (i = 0; i < ARRAY_SIZE(mmc_omap_status_bits); i++) - if (status & (1 << i)) { - if (c) - printk(" "); - printk("%s", mmc_omap_status_bits[i]); - c++; - } + if (status & (1 << i)) + buf += sprintf(buf, " %s", mmc_omap_status_bits[i]); + dev_vdbg(mmc_dev(host->mmc), "%s\n", res); +} +#else +static void mmc_omap_report_irq(struct mmc_omap_host *host, u16 status) +{ } +#endif + static irqreturn_t mmc_omap_irq(int irq, void *dev_id) { @@ -737,12 +751,10 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id) cmd = host->cmd->opcode; else cmd = -1; -#ifdef CONFIG_MMC_DEBUG dev_dbg(mmc_dev(host->mmc), "MMC IRQ %04x (CMD %d): ", status, cmd); - mmc_omap_report_irq(status); - printk("\n"); -#endif + mmc_omap_report_irq(host, status); + if (host->total_bytes_left) { if ((status & OMAP_MMC_STAT_A_FULL) || (status & OMAP_MMC_STAT_END_OF_DATA)) @@ -826,11 +838,11 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id) host->abort = 1; OMAP_MMC_WRITE(host, IE, 0); disable_irq_nosync(host->irq); - schedule_work(&host->cmd_abort_work); + queue_work(host->mmc_omap_wq, &host->cmd_abort_work); return IRQ_HANDLED; } - if (end_command) + if (end_command && host->cmd) mmc_omap_cmd_done(host, host->cmd); if (host->data != NULL) { if (transfer_error) @@ -889,159 +901,15 @@ static void mmc_omap_cover_handler(unsigned long param) jiffies + msecs_to_jiffies(OMAP_MMC_COVER_POLL_DELAY)); } -/* Prepare to transfer the next segment of a scatterlist */ -static void -mmc_omap_prepare_dma(struct mmc_omap_host *host, struct mmc_data *data) -{ - int dma_ch = host->dma_ch; - unsigned long data_addr; - u16 buf, frame; - u32 count; - struct scatterlist *sg = &data->sg[host->sg_idx]; - int src_port = 0; - int dst_port = 0; - int sync_dev = 0; - - data_addr = host->phys_base + OMAP_MMC_REG(host, DATA); - frame = data->blksz; - count = sg_dma_len(sg); - - if ((data->blocks == 1) && (count > data->blksz)) - count = frame; - - host->dma_len = count; - - /* FIFO is 16x2 bytes on 15xx, and 32x2 bytes on 16xx and 24xx. - * Use 16 or 32 word frames when the blocksize is at least that large. - * Blocksize is usually 512 bytes; but not for some SD reads. - */ - if (cpu_is_omap15xx() && frame > 32) - frame = 32; - else if (frame > 64) - frame = 64; - count /= frame; - frame >>= 1; - - if (!(data->flags & MMC_DATA_WRITE)) { - buf = 0x800f | ((frame - 1) << 8); - - if (cpu_class_is_omap1()) { - src_port = OMAP_DMA_PORT_TIPB; - dst_port = OMAP_DMA_PORT_EMIFF; - } - if (cpu_is_omap24xx()) - sync_dev = OMAP24XX_DMA_MMC1_RX; - - omap_set_dma_src_params(dma_ch, src_port, - OMAP_DMA_AMODE_CONSTANT, - data_addr, 0, 0); - omap_set_dma_dest_params(dma_ch, dst_port, - OMAP_DMA_AMODE_POST_INC, - sg_dma_address(sg), 0, 0); - omap_set_dma_dest_data_pack(dma_ch, 1); - omap_set_dma_dest_burst_mode(dma_ch, OMAP_DMA_DATA_BURST_4); - } else { - buf = 0x0f80 | ((frame - 1) << 0); - - if (cpu_class_is_omap1()) { - src_port = OMAP_DMA_PORT_EMIFF; - dst_port = OMAP_DMA_PORT_TIPB; - } - if (cpu_is_omap24xx()) - sync_dev = OMAP24XX_DMA_MMC1_TX; - - omap_set_dma_dest_params(dma_ch, dst_port, - OMAP_DMA_AMODE_CONSTANT, - data_addr, 0, 0); - omap_set_dma_src_params(dma_ch, src_port, - OMAP_DMA_AMODE_POST_INC, - sg_dma_address(sg), 0, 0); - omap_set_dma_src_data_pack(dma_ch, 1); - omap_set_dma_src_burst_mode(dma_ch, OMAP_DMA_DATA_BURST_4); - } - - /* Max limit for DMA frame count is 0xffff */ - BUG_ON(count > 0xffff); - - OMAP_MMC_WRITE(host, BUF, buf); - omap_set_dma_transfer_params(dma_ch, OMAP_DMA_DATA_TYPE_S16, - frame, count, OMAP_DMA_SYNC_FRAME, - sync_dev, 0); -} - -/* A scatterlist segment completed */ -static void mmc_omap_dma_cb(int lch, u16 ch_status, void *data) +static void mmc_omap_dma_callback(void *priv) { - struct mmc_omap_host *host = (struct mmc_omap_host *) data; - struct mmc_data *mmcdat = host->data; - - if (unlikely(host->dma_ch < 0)) { - dev_err(mmc_dev(host->mmc), - "DMA callback while DMA not enabled\n"); - return; - } - /* FIXME: We really should do something to _handle_ the errors */ - if (ch_status & OMAP1_DMA_TOUT_IRQ) { - dev_err(mmc_dev(host->mmc),"DMA timeout\n"); - return; - } - if (ch_status & OMAP_DMA_DROP_IRQ) { - dev_err(mmc_dev(host->mmc), "DMA sync error\n"); - return; - } - if (!(ch_status & OMAP_DMA_BLOCK_IRQ)) { - return; - } - mmcdat->bytes_xfered += host->dma_len; - host->sg_idx++; - if (host->sg_idx < host->sg_len) { - mmc_omap_prepare_dma(host, host->data); - omap_start_dma(host->dma_ch); - } else - mmc_omap_dma_done(host, host->data); -} + struct mmc_omap_host *host = priv; + struct mmc_data *data = host->data; -static int mmc_omap_get_dma_channel(struct mmc_omap_host *host, struct mmc_data *data) -{ - const char *dma_dev_name; - int sync_dev, dma_ch, is_read, r; - - is_read = !(data->flags & MMC_DATA_WRITE); - del_timer_sync(&host->dma_timer); - if (host->dma_ch >= 0) { - if (is_read == host->dma_is_read) - return 0; - omap_free_dma(host->dma_ch); - host->dma_ch = -1; - } + /* If we got to the end of DMA, assume everything went well */ + data->bytes_xfered += data->blocks * data->blksz; - if (is_read) { - if (host->id == 0) { - sync_dev = OMAP_DMA_MMC_RX; - dma_dev_name = "MMC1 read"; - } else { - sync_dev = OMAP_DMA_MMC2_RX; - dma_dev_name = "MMC2 read"; - } - } else { - if (host->id == 0) { - sync_dev = OMAP_DMA_MMC_TX; - dma_dev_name = "MMC1 write"; - } else { - sync_dev = OMAP_DMA_MMC2_TX; - dma_dev_name = "MMC2 write"; - } - } - r = omap_request_dma(sync_dev, dma_dev_name, mmc_omap_dma_cb, - host, &dma_ch); - if (r != 0) { - dev_dbg(mmc_dev(host->mmc), "omap_request_dma() failed with %d\n", r); - return r; - } - host->dma_ch = dma_ch; - host->dma_is_read = is_read; - - return 0; + mmc_omap_dma_done(host, data); } static inline void set_cmd_timeout(struct mmc_omap_host *host, struct mmc_request *req) @@ -1079,7 +947,7 @@ static void mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req) { struct mmc_data *data = req->data; - int i, use_dma, block_size; + int i, use_dma = 1, block_size; unsigned sg_len; host->data = data; @@ -1104,45 +972,94 @@ mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req) sg_len = (data->blocks == 1) ? 1 : data->sg_len; /* Only do DMA for entire blocks */ - use_dma = host->use_dma; - if (use_dma) { - for (i = 0; i < sg_len; i++) { - if ((data->sg[i].length % block_size) != 0) { - use_dma = 0; - break; - } + for (i = 0; i < sg_len; i++) { + if ((data->sg[i].length % block_size) != 0) { + use_dma = 0; + break; } } host->sg_idx = 0; if (use_dma) { - if (mmc_omap_get_dma_channel(host, data) == 0) { - enum dma_data_direction dma_data_dir; - - if (data->flags & MMC_DATA_WRITE) - dma_data_dir = DMA_TO_DEVICE; - else - dma_data_dir = DMA_FROM_DEVICE; - - host->sg_len = dma_map_sg(mmc_dev(host->mmc), data->sg, - sg_len, dma_data_dir); - host->total_bytes_left = 0; - mmc_omap_prepare_dma(host, req->data); - host->brs_received = 0; - host->dma_done = 0; - host->dma_in_use = 1; - } else - use_dma = 0; + enum dma_data_direction dma_data_dir; + struct dma_async_tx_descriptor *tx; + struct dma_chan *c; + u32 burst, *bp; + u16 buf; + + /* + * FIFO is 16x2 bytes on 15xx, and 32x2 bytes on 16xx + * and 24xx. Use 16 or 32 word frames when the + * blocksize is at least that large. Blocksize is + * usually 512 bytes; but not for some SD reads. + */ + burst = mmc_omap15xx() ? 32 : 64; + if (burst > data->blksz) + burst = data->blksz; + + burst >>= 1; + + if (data->flags & MMC_DATA_WRITE) { + c = host->dma_tx; + bp = &host->dma_tx_burst; + buf = 0x0f80 | (burst - 1) << 0; + dma_data_dir = DMA_TO_DEVICE; + } else { + c = host->dma_rx; + bp = &host->dma_rx_burst; + buf = 0x800f | (burst - 1) << 8; + dma_data_dir = DMA_FROM_DEVICE; + } + + if (!c) + goto use_pio; + + /* Only reconfigure if we have a different burst size */ + if (*bp != burst) { + struct dma_slave_config cfg; + + cfg.src_addr = host->phys_base + OMAP_MMC_REG(host, DATA); + cfg.dst_addr = host->phys_base + OMAP_MMC_REG(host, DATA); + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; + cfg.src_maxburst = burst; + cfg.dst_maxburst = burst; + + if (dmaengine_slave_config(c, &cfg)) + goto use_pio; + + *bp = burst; + } + + host->sg_len = dma_map_sg(c->device->dev, data->sg, sg_len, + dma_data_dir); + if (host->sg_len == 0) + goto use_pio; + + tx = dmaengine_prep_slave_sg(c, data->sg, host->sg_len, + data->flags & MMC_DATA_WRITE ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!tx) + goto use_pio; + + OMAP_MMC_WRITE(host, BUF, buf); + + tx->callback = mmc_omap_dma_callback; + tx->callback_param = host; + dmaengine_submit(tx); + host->brs_received = 0; + host->dma_done = 0; + host->dma_in_use = 1; + return; } + use_pio: /* Revert to PIO? */ - if (!use_dma) { - OMAP_MMC_WRITE(host, BUF, 0x1f1f); - host->total_bytes_left = data->blocks * block_size; - host->sg_len = sg_len; - mmc_omap_sg_to_buf(host); - host->dma_in_use = 0; - } + OMAP_MMC_WRITE(host, BUF, 0x1f1f); + host->total_bytes_left = data->blocks * block_size; + host->sg_len = sg_len; + mmc_omap_sg_to_buf(host); + host->dma_in_use = 0; } static void mmc_omap_start_request(struct mmc_omap_host *host, @@ -1155,8 +1072,12 @@ static void mmc_omap_start_request(struct mmc_omap_host *host, /* only touch fifo AFTER the controller readies it */ mmc_omap_prepare_data(host, req); mmc_omap_start_command(host, req->cmd); - if (host->dma_in_use) - omap_start_dma(host->dma_ch); + if (host->dma_in_use) { + struct dma_chan *c = host->data->flags & MMC_DATA_WRITE ? + host->dma_tx : host->dma_rx; + + dma_async_issue_pending(c); + } } static void mmc_omap_request(struct mmc_host *mmc, struct mmc_request *req) @@ -1188,8 +1109,7 @@ static void mmc_omap_set_power(struct mmc_omap_slot *slot, int power_on, if (slot->pdata->set_power != NULL) slot->pdata->set_power(mmc_dev(slot->mmc), slot->id, power_on, vdd); - - if (cpu_is_omap24xx()) { + if (mmc_omap2()) { u16 w; if (power_on) { @@ -1298,7 +1218,7 @@ static const struct mmc_host_ops mmc_omap_ops = { .set_ios = mmc_omap_set_ios, }; -static int __init mmc_omap_new_slot(struct mmc_omap_host *host, int id) +static int mmc_omap_new_slot(struct mmc_omap_host *host, int id) { struct mmc_omap_slot *slot = NULL; struct mmc_host *mmc; @@ -1318,12 +1238,12 @@ static int __init mmc_omap_new_slot(struct mmc_omap_host *host, int id) mmc->caps = 0; if (host->pdata->slots[id].wires >= 4) - mmc->caps |= MMC_CAP_4_BIT_DATA; + mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_ERASE; mmc->ops = &mmc_omap_ops; mmc->f_min = 400000; - if (cpu_class_is_omap2()) + if (mmc_omap2()) mmc->f_max = 48000000; else mmc->f_max = 24000000; @@ -1341,6 +1261,13 @@ static int __init mmc_omap_new_slot(struct mmc_omap_host *host, int id) mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; mmc->max_seg_size = mmc->max_req_size; + if (slot->pdata->get_cover_state != NULL) { + setup_timer(&slot->cover_timer, mmc_omap_cover_timer, + (unsigned long)slot); + tasklet_init(&slot->cover_tasklet, mmc_omap_cover_handler, + (unsigned long)slot); + } + r = mmc_add_host(mmc); if (r < 0) goto err_remove_host; @@ -1357,11 +1284,6 @@ static int __init mmc_omap_new_slot(struct mmc_omap_host *host, int id) &dev_attr_cover_switch); if (r < 0) goto err_remove_slot_name; - - setup_timer(&slot->cover_timer, mmc_omap_cover_timer, - (unsigned long)slot); - tasklet_init(&slot->cover_tasklet, mmc_omap_cover_handler, - (unsigned long)slot); tasklet_schedule(&slot->cover_tasklet); } @@ -1387,17 +1309,19 @@ static void mmc_omap_remove_slot(struct mmc_omap_slot *slot) tasklet_kill(&slot->cover_tasklet); del_timer_sync(&slot->cover_timer); - flush_scheduled_work(); + flush_workqueue(slot->host->mmc_omap_wq); mmc_remove_host(mmc); mmc_free_host(mmc); } -static int __init mmc_omap_probe(struct platform_device *pdev) +static int mmc_omap_probe(struct platform_device *pdev) { struct omap_mmc_platform_data *pdata = pdev->dev.platform_data; struct mmc_omap_host *host = NULL; struct resource *res; + dma_cap_mask_t mask; + unsigned sig = 0; int i, ret = 0; int irq; @@ -1407,24 +1331,22 @@ static int __init mmc_omap_probe(struct platform_device *pdev) } if (pdata->nr_slots == 0) { dev_err(&pdev->dev, "no slots\n"); - return -ENXIO; + return -EPROBE_DEFER; } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + host = devm_kzalloc(&pdev->dev, sizeof(struct mmc_omap_host), + GFP_KERNEL); + if (host == NULL) + return -ENOMEM; + irq = platform_get_irq(pdev, 0); - if (res == NULL || irq < 0) + if (irq < 0) return -ENXIO; - res = request_mem_region(res->start, res->end - res->start + 1, - pdev->name); - if (res == NULL) - return -EBUSY; - - host = kzalloc(sizeof(struct mmc_omap_host), GFP_KERNEL); - if (host == NULL) { - ret = -ENOMEM; - goto err_free_mem_region; - } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + host->virt_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(host->virt_base)) + return PTR_ERR(host->virt_base); INIT_WORK(&host->slot_release_work, mmc_omap_slot_release_work); INIT_WORK(&host->send_stop_work, mmc_omap_send_stop_work); @@ -1437,33 +1359,20 @@ static int __init mmc_omap_probe(struct platform_device *pdev) setup_timer(&host->clk_timer, mmc_omap_clk_timer, (unsigned long) host); spin_lock_init(&host->dma_lock); - setup_timer(&host->dma_timer, mmc_omap_dma_timer, (unsigned long) host); spin_lock_init(&host->slot_lock); init_waitqueue_head(&host->slot_wq); host->pdata = pdata; + host->features = host->pdata->slots[0].features; host->dev = &pdev->dev; platform_set_drvdata(pdev, host); host->id = pdev->id; - host->mem_res = res; - host->irq = irq; - - host->use_dma = 1; - host->dev->dma_mask = &pdata->dma_mask; - host->dma_ch = -1; - host->irq = irq; - host->phys_base = host->mem_res->start; - host->virt_base = ioremap(res->start, res->end - res->start + 1); - if (!host->virt_base) - goto err_ioremap; - + host->phys_base = res->start; host->iclk = clk_get(&pdev->dev, "ick"); - if (IS_ERR(host->iclk)) { - ret = PTR_ERR(host->iclk); - goto err_free_mmc_host; - } + if (IS_ERR(host->iclk)) + return PTR_ERR(host->iclk); clk_enable(host->iclk); host->fclk = clk_get(&pdev->dev, "fck"); @@ -1472,9 +1381,33 @@ static int __init mmc_omap_probe(struct platform_device *pdev) goto err_free_iclk; } + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + host->dma_tx_burst = -1; + host->dma_rx_burst = -1; + + res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx"); + if (res) + sig = res->start; + host->dma_tx = dma_request_slave_channel_compat(mask, + omap_dma_filter_fn, &sig, &pdev->dev, "tx"); + if (!host->dma_tx) + dev_warn(host->dev, "unable to obtain TX DMA engine channel %u\n", + sig); + + res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx"); + if (res) + sig = res->start; + host->dma_rx = dma_request_slave_channel_compat(mask, + omap_dma_filter_fn, &sig, &pdev->dev, "rx"); + if (!host->dma_rx) + dev_warn(host->dev, "unable to obtain RX DMA engine channel %u\n", + sig); + ret = request_irq(host->irq, mmc_omap_irq, 0, DRIVER_NAME, host); if (ret) - goto err_free_fclk; + goto err_free_dma; if (pdata->init != NULL) { ret = pdata->init(&pdev->dev); @@ -1483,36 +1416,40 @@ static int __init mmc_omap_probe(struct platform_device *pdev) } host->nr_slots = pdata->nr_slots; + host->reg_shift = (mmc_omap7xx() ? 1 : 2); + + host->mmc_omap_wq = alloc_workqueue("mmc_omap", 0, 0); + if (!host->mmc_omap_wq) + goto err_plat_cleanup; + for (i = 0; i < pdata->nr_slots; i++) { ret = mmc_omap_new_slot(host, i); if (ret < 0) { while (--i >= 0) mmc_omap_remove_slot(host->slots[i]); - goto err_plat_cleanup; + goto err_destroy_wq; } } - host->reg_shift = (cpu_is_omap7xx() ? 1 : 2); - return 0; +err_destroy_wq: + destroy_workqueue(host->mmc_omap_wq); err_plat_cleanup: if (pdata->cleanup) pdata->cleanup(&pdev->dev); err_free_irq: free_irq(host->irq, host); -err_free_fclk: +err_free_dma: + if (host->dma_tx) + dma_release_channel(host->dma_tx); + if (host->dma_rx) + dma_release_channel(host->dma_rx); clk_put(host->fclk); err_free_iclk: clk_disable(host->iclk); clk_put(host->iclk); -err_free_mmc_host: - iounmap(host->virt_base); -err_ioremap: - kfree(host); -err_free_mem_region: - release_mem_region(res->start, res->end - res->start + 1); return ret; } @@ -1521,8 +1458,6 @@ static int mmc_omap_remove(struct platform_device *pdev) struct mmc_omap_host *host = platform_get_drvdata(pdev); int i; - platform_set_drvdata(pdev, NULL); - BUG_ON(host == NULL); for (i = 0; i < host->nr_slots; i++) @@ -1537,89 +1472,35 @@ static int mmc_omap_remove(struct platform_device *pdev) clk_disable(host->iclk); clk_put(host->iclk); - iounmap(host->virt_base); - release_mem_region(pdev->resource[0].start, - pdev->resource[0].end - pdev->resource[0].start + 1); - - kfree(host); - - return 0; -} - -#ifdef CONFIG_PM -static int mmc_omap_suspend(struct platform_device *pdev, pm_message_t mesg) -{ - int i, ret = 0; - struct mmc_omap_host *host = platform_get_drvdata(pdev); - - if (host == NULL || host->suspended) - return 0; + if (host->dma_tx) + dma_release_channel(host->dma_tx); + if (host->dma_rx) + dma_release_channel(host->dma_rx); - for (i = 0; i < host->nr_slots; i++) { - struct mmc_omap_slot *slot; + destroy_workqueue(host->mmc_omap_wq); - slot = host->slots[i]; - ret = mmc_suspend_host(slot->mmc); - if (ret < 0) { - while (--i >= 0) { - slot = host->slots[i]; - mmc_resume_host(slot->mmc); - } - return ret; - } - } - host->suspended = 1; return 0; } -static int mmc_omap_resume(struct platform_device *pdev) -{ - int i, ret = 0; - struct mmc_omap_host *host = platform_get_drvdata(pdev); - - if (host == NULL || !host->suspended) - return 0; - - for (i = 0; i < host->nr_slots; i++) { - struct mmc_omap_slot *slot; - slot = host->slots[i]; - ret = mmc_resume_host(slot->mmc); - if (ret < 0) - return ret; - - host->suspended = 0; - } - return 0; -} -#else -#define mmc_omap_suspend NULL -#define mmc_omap_resume NULL +#if IS_BUILTIN(CONFIG_OF) +static const struct of_device_id mmc_omap_match[] = { + { .compatible = "ti,omap2420-mmc", }, + { }, +}; #endif static struct platform_driver mmc_omap_driver = { + .probe = mmc_omap_probe, .remove = mmc_omap_remove, - .suspend = mmc_omap_suspend, - .resume = mmc_omap_resume, .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, + .of_match_table = of_match_ptr(mmc_omap_match), }, }; -static int __init mmc_omap_init(void) -{ - return platform_driver_probe(&mmc_omap_driver, mmc_omap_probe); -} - -static void __exit mmc_omap_exit(void) -{ - platform_driver_unregister(&mmc_omap_driver); -} - -module_init(mmc_omap_init); -module_exit(mmc_omap_exit); - +module_platform_driver(mmc_omap_driver); MODULE_DESCRIPTION("OMAP Multimedia Card driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:" DRIVER_NAME); -MODULE_AUTHOR("Juha Yrjölä"); +MODULE_AUTHOR("Juha Yrjölä"); diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 82a1079bbdc..6b7b7558592 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -17,32 +17,35 @@ #include <linux/module.h> #include <linux/init.h> +#include <linux/kernel.h> #include <linux/debugfs.h> +#include <linux/dmaengine.h> #include <linux/seq_file.h> +#include <linux/sizes.h> #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/dma-mapping.h> #include <linux/platform_device.h> -#include <linux/workqueue.h> #include <linux/timer.h> #include <linux/clk.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/of_device.h> +#include <linux/omap-dmaengine.h> #include <linux/mmc/host.h> #include <linux/mmc/core.h> #include <linux/mmc/mmc.h> #include <linux/io.h> -#include <linux/semaphore.h> #include <linux/gpio.h> #include <linux/regulator/consumer.h> -#include <plat/dma.h> -#include <mach/hardware.h> -#include <plat/board.h> -#include <plat/mmc.h> -#include <plat/cpu.h> +#include <linux/pinctrl/consumer.h> +#include <linux/pm_runtime.h> +#include <linux/platform_data/mmc-omap.h> /* OMAP HSMMC Host Controller Registers */ -#define OMAP_HSMMC_SYSCONFIG 0x0010 #define OMAP_HSMMC_SYSSTATUS 0x0014 #define OMAP_HSMMC_CON 0x002C +#define OMAP_HSMMC_SDMASA 0x0100 #define OMAP_HSMMC_BLK 0x0104 #define OMAP_HSMMC_ARG 0x0108 #define OMAP_HSMMC_CMD 0x010C @@ -56,10 +59,12 @@ #define OMAP_HSMMC_STAT 0x0130 #define OMAP_HSMMC_IE 0x0134 #define OMAP_HSMMC_ISE 0x0138 +#define OMAP_HSMMC_AC12 0x013C #define OMAP_HSMMC_CAPA 0x0140 #define VS18 (1 << 26) #define VS30 (1 << 25) +#define HSS (1 << 21) #define SDVS18 (0x5 << 9) #define SDVS30 (0x6 << 9) #define SDVS33 (0x7 << 9) @@ -72,59 +77,70 @@ #define ICE 0x1 #define ICS 0x2 #define CEN (1 << 2) +#define CLKD_MAX 0x3FF /* max clock divisor: 1023 */ #define CLKD_MASK 0x0000FFC0 #define CLKD_SHIFT 6 #define DTO_MASK 0x000F0000 #define DTO_SHIFT 16 -#define INT_EN_MASK 0x307F0033 -#define BWR_ENABLE (1 << 4) -#define BRR_ENABLE (1 << 5) -#define DTO_ENABLE (1 << 20) #define INIT_STREAM (1 << 1) +#define ACEN_ACMD23 (2 << 2) #define DP_SELECT (1 << 21) #define DDIR (1 << 4) -#define DMA_EN 0x1 +#define DMAE 0x1 #define MSBS (1 << 5) #define BCE (1 << 1) #define FOUR_BIT (1 << 1) +#define HSPE (1 << 2) +#define DDR (1 << 19) #define DW8 (1 << 5) -#define CC 0x1 -#define TC 0x02 #define OD 0x1 -#define ERR (1 << 15) -#define CMD_TIMEOUT (1 << 16) -#define DATA_TIMEOUT (1 << 20) -#define CMD_CRC (1 << 17) -#define DATA_CRC (1 << 21) -#define CARD_ERR (1 << 28) #define STAT_CLEAR 0xFFFFFFFF #define INIT_STREAM_CMD 0x00000000 #define DUAL_VOLT_OCR_BIT 7 #define SRC (1 << 25) #define SRD (1 << 26) #define SOFTRESET (1 << 1) -#define RESETDONE (1 << 0) - -/* - * FIXME: Most likely all the data using these _DEVID defines should come - * from the platform_data, or implemented in controller and slot specific - * functions. - */ -#define OMAP_MMC1_DEVID 0 -#define OMAP_MMC2_DEVID 1 -#define OMAP_MMC3_DEVID 2 -#define OMAP_MMC4_DEVID 3 -#define OMAP_MMC5_DEVID 4 - -#define MMC_TIMEOUT_MS 20 -#define OMAP_MMC_MASTER_CLOCK 96000000 -#define DRIVER_NAME "mmci-omap-hs" - -/* Timeouts for entering power saving states on inactivity, msec */ -#define OMAP_MMC_DISABLED_TIMEOUT 100 -#define OMAP_MMC_SLEEP_TIMEOUT 1000 -#define OMAP_MMC_OFF_TIMEOUT 8000 +/* Interrupt masks for IE and ISE register */ +#define CC_EN (1 << 0) +#define TC_EN (1 << 1) +#define BWR_EN (1 << 4) +#define BRR_EN (1 << 5) +#define ERR_EN (1 << 15) +#define CTO_EN (1 << 16) +#define CCRC_EN (1 << 17) +#define CEB_EN (1 << 18) +#define CIE_EN (1 << 19) +#define DTO_EN (1 << 20) +#define DCRC_EN (1 << 21) +#define DEB_EN (1 << 22) +#define ACE_EN (1 << 24) +#define CERR_EN (1 << 28) +#define BADA_EN (1 << 29) + +#define INT_EN_MASK (BADA_EN | CERR_EN | ACE_EN | DEB_EN | DCRC_EN |\ + DTO_EN | CIE_EN | CEB_EN | CCRC_EN | CTO_EN | \ + BRR_EN | BWR_EN | TC_EN | CC_EN) + +#define CNI (1 << 7) +#define ACIE (1 << 4) +#define ACEB (1 << 3) +#define ACCE (1 << 2) +#define ACTO (1 << 1) +#define ACNE (1 << 0) + +#define MMC_AUTOSUSPEND_DELAY 100 +#define MMC_TIMEOUT_MS 20 /* 20 mSec */ +#define MMC_TIMEOUT_US 20000 /* 20000 micro Sec */ +#define OMAP_MMC_MIN_CLOCK 400000 +#define OMAP_MMC_MAX_CLOCK 52000000 +#define DRIVER_NAME "omap_hsmmc" + +#define VDD_1V8 1800000 /* 180000 uV */ +#define VDD_3V0 3000000 /* 300000 uV */ +#define VDD_165_195 (ffs(MMC_VDD_165_195) - 1) + +#define AUTO_CMD23 (1 << 1) /* Auto CMD23 support */ /* * One controller can have multiple slots, like on some omap boards using * omap.c controller driver. Luckily this is not currently done on any known @@ -141,6 +157,11 @@ #define OMAP_HSMMC_WRITE(base, reg, val) \ __raw_writel((val), (base) + OMAP_HSMMC_##reg) +struct omap_hsmmc_next { + unsigned int dma_len; + s32 cookie; +}; + struct omap_hsmmc_host { struct device *dev; struct mmc_host *mmc; @@ -148,7 +169,6 @@ struct omap_hsmmc_host { struct mmc_command *cmd; struct mmc_data *data; struct clk *fclk; - struct clk *iclk; struct clk *dbclk; /* * vcc == configured supply @@ -159,38 +179,48 @@ struct omap_hsmmc_host { */ struct regulator *vcc; struct regulator *vcc_aux; - struct work_struct mmc_carddetect_work; + struct regulator *pbias; + bool pbias_enabled; void __iomem *base; resource_size_t mapbase; spinlock_t irq_lock; /* Prevent races with irq handler */ - unsigned int id; unsigned int dma_len; unsigned int dma_sg_idx; unsigned char bus_mode; unsigned char power_mode; - u32 *buffer; - u32 bytesleft; int suspended; + u32 con; + u32 hctl; + u32 sysctl; + u32 capa; int irq; int use_dma, dma_ch; - int dma_line_tx, dma_line_rx; + struct dma_chan *tx_chan; + struct dma_chan *rx_chan; int slot_id; - int got_dbclk; int response_busy; int context_loss; - int dpm_state; - int vdd; int protect_card; int reqs_blocked; int use_reg; int req_in_progress; - + unsigned long clk_rate; + unsigned int flags; + struct omap_hsmmc_next next_data; struct omap_mmc_platform_data *pdata; }; +struct omap_mmc_of_data { + u32 reg_offset; + u8 controller_flags; +}; + +static void omap_hsmmc_start_dma_transfer(struct omap_hsmmc_host *host); + static int omap_hsmmc_card_detect(struct device *dev, int slot) { - struct omap_mmc_platform_data *mmc = dev->platform_data; + struct omap_hsmmc_host *host = dev_get_drvdata(dev); + struct omap_mmc_platform_data *mmc = host->pdata; /* NOTE: assumes card detect signal is active-low */ return !gpio_get_value_cansleep(mmc->slots[0].switch_pin); @@ -198,7 +228,8 @@ static int omap_hsmmc_card_detect(struct device *dev, int slot) static int omap_hsmmc_get_wp(struct device *dev, int slot) { - struct omap_mmc_platform_data *mmc = dev->platform_data; + struct omap_hsmmc_host *host = dev_get_drvdata(dev); + struct omap_mmc_platform_data *mmc = host->pdata; /* NOTE: assumes write protect signal is active-high */ return gpio_get_value_cansleep(mmc->slots[0].gpio_wp); @@ -206,7 +237,8 @@ static int omap_hsmmc_get_wp(struct device *dev, int slot) static int omap_hsmmc_get_cover_state(struct device *dev, int slot) { - struct omap_mmc_platform_data *mmc = dev->platform_data; + struct omap_hsmmc_host *host = dev_get_drvdata(dev); + struct omap_mmc_platform_data *mmc = host->pdata; /* NOTE: assumes card detect signal is active-low */ return !gpio_get_value_cansleep(mmc->slots[0].switch_pin); @@ -216,7 +248,8 @@ static int omap_hsmmc_get_cover_state(struct device *dev, int slot) static int omap_hsmmc_suspend_cdirq(struct device *dev, int slot) { - struct omap_mmc_platform_data *mmc = dev->platform_data; + struct omap_hsmmc_host *host = dev_get_drvdata(dev); + struct omap_mmc_platform_data *mmc = host->pdata; disable_irq(mmc->slots[0].card_detect_irq); return 0; @@ -224,7 +257,8 @@ static int omap_hsmmc_suspend_cdirq(struct device *dev, int slot) static int omap_hsmmc_resume_cdirq(struct device *dev, int slot) { - struct omap_mmc_platform_data *mmc = dev->platform_data; + struct omap_hsmmc_host *host = dev_get_drvdata(dev); + struct omap_mmc_platform_data *mmc = host->pdata; enable_irq(mmc->slots[0].card_detect_irq); return 0; @@ -239,28 +273,7 @@ static int omap_hsmmc_resume_cdirq(struct device *dev, int slot) #ifdef CONFIG_REGULATOR -static int omap_hsmmc_1_set_power(struct device *dev, int slot, int power_on, - int vdd) -{ - struct omap_hsmmc_host *host = - platform_get_drvdata(to_platform_device(dev)); - int ret; - - if (mmc_slot(host).before_set_reg) - mmc_slot(host).before_set_reg(dev, slot, power_on, vdd); - - if (power_on) - ret = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd); - else - ret = mmc_regulator_set_ocr(host->mmc, host->vcc, 0); - - if (mmc_slot(host).after_set_reg) - mmc_slot(host).after_set_reg(dev, slot, power_on, vdd); - - return ret; -} - -static int omap_hsmmc_23_set_power(struct device *dev, int slot, int power_on, +static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on, int vdd) { struct omap_hsmmc_host *host = @@ -277,6 +290,15 @@ static int omap_hsmmc_23_set_power(struct device *dev, int slot, int power_on, if (mmc_slot(host).before_set_reg) mmc_slot(host).before_set_reg(dev, slot, power_on, vdd); + if (host->pbias) { + if (host->pbias_enabled == 1) { + ret = regulator_disable(host->pbias); + if (!ret) + host->pbias_enabled = 0; + } + regulator_set_voltage(host->pbias, VDD_3V0, VDD_3V0); + } + /* * Assume Vcc regulator is used only to power the card ... OMAP * VDDS is used to power the pins, optionally with a transceiver to @@ -291,11 +313,12 @@ static int omap_hsmmc_23_set_power(struct device *dev, int slot, int power_on, * chips/cards need an interface voltage rail too. */ if (power_on) { - ret = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd); + if (host->vcc) + ret = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd); /* Enable interface voltage rail, if needed */ if (ret == 0 && host->vcc_aux) { ret = regulator_enable(host->vcc_aux); - if (ret < 0) + if (ret < 0 && host->vcc) ret = mmc_regulator_set_ocr(host->mmc, host->vcc, 0); } @@ -303,103 +326,47 @@ static int omap_hsmmc_23_set_power(struct device *dev, int slot, int power_on, /* Shut down the rail */ if (host->vcc_aux) ret = regulator_disable(host->vcc_aux); - if (!ret) { + if (host->vcc) { /* Then proceed to shut down the local regulator */ ret = mmc_regulator_set_ocr(host->mmc, host->vcc, 0); } } + if (host->pbias) { + if (vdd <= VDD_165_195) + ret = regulator_set_voltage(host->pbias, VDD_1V8, + VDD_1V8); + else + ret = regulator_set_voltage(host->pbias, VDD_3V0, + VDD_3V0); + if (ret < 0) + goto error_set_power; + + if (host->pbias_enabled == 0) { + ret = regulator_enable(host->pbias); + if (!ret) + host->pbias_enabled = 1; + } + } + if (mmc_slot(host).after_set_reg) mmc_slot(host).after_set_reg(dev, slot, power_on, vdd); +error_set_power: return ret; } -static int omap_hsmmc_1_set_sleep(struct device *dev, int slot, int sleep, - int vdd, int cardsleep) -{ - struct omap_hsmmc_host *host = - platform_get_drvdata(to_platform_device(dev)); - int mode = sleep ? REGULATOR_MODE_STANDBY : REGULATOR_MODE_NORMAL; - - return regulator_set_mode(host->vcc, mode); -} - -static int omap_hsmmc_23_set_sleep(struct device *dev, int slot, int sleep, - int vdd, int cardsleep) -{ - struct omap_hsmmc_host *host = - platform_get_drvdata(to_platform_device(dev)); - int err, mode; - - /* - * If we don't see a Vcc regulator, assume it's a fixed - * voltage always-on regulator. - */ - if (!host->vcc) - return 0; - - mode = sleep ? REGULATOR_MODE_STANDBY : REGULATOR_MODE_NORMAL; - - if (!host->vcc_aux) - return regulator_set_mode(host->vcc, mode); - - if (cardsleep) { - /* VCC can be turned off if card is asleep */ - if (sleep) - err = mmc_regulator_set_ocr(host->mmc, host->vcc, 0); - else - err = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd); - } else - err = regulator_set_mode(host->vcc, mode); - if (err) - return err; - - if (!mmc_slot(host).vcc_aux_disable_is_sleep) - return regulator_set_mode(host->vcc_aux, mode); - - if (sleep) - return regulator_disable(host->vcc_aux); - else - return regulator_enable(host->vcc_aux); -} - static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host) { struct regulator *reg; - int ret = 0; int ocr_value = 0; - switch (host->id) { - case OMAP_MMC1_DEVID: - /* On-chip level shifting via PBIAS0/PBIAS1 */ - mmc_slot(host).set_power = omap_hsmmc_1_set_power; - mmc_slot(host).set_sleep = omap_hsmmc_1_set_sleep; - break; - case OMAP_MMC2_DEVID: - case OMAP_MMC3_DEVID: - /* Off-chip level shifting, or none */ - mmc_slot(host).set_power = omap_hsmmc_23_set_power; - mmc_slot(host).set_sleep = omap_hsmmc_23_set_sleep; - break; - default: - pr_err("MMC%d configuration not supported!\n", host->id); - return -EINVAL; - } - - reg = regulator_get(host->dev, "vmmc"); + reg = devm_regulator_get(host->dev, "vmmc"); if (IS_ERR(reg)) { - dev_dbg(host->dev, "vmmc regulator missing\n"); - /* - * HACK: until fixed.c regulator is usable, - * we don't require a main regulator - * for MMC2 or MMC3 - */ - if (host->id == OMAP_MMC1_DEVID) { - ret = PTR_ERR(reg); - goto err; - } + dev_err(host->dev, "unable to get vmmc regulator %ld\n", + PTR_ERR(reg)); + return PTR_ERR(reg); } else { host->vcc = reg; ocr_value = mmc_regulator_get_ocrmask(reg); @@ -407,52 +374,43 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host) mmc_slot(host).ocr_mask = ocr_value; } else { if (!(mmc_slot(host).ocr_mask & ocr_value)) { - pr_err("MMC%d ocrmask %x is not supported\n", - host->id, mmc_slot(host).ocr_mask); + dev_err(host->dev, "ocrmask %x is not supported\n", + mmc_slot(host).ocr_mask); mmc_slot(host).ocr_mask = 0; return -EINVAL; } } - mmc_slot(host).ocr_mask = mmc_regulator_get_ocrmask(reg); + } + mmc_slot(host).set_power = omap_hsmmc_set_power; - /* Allow an aux regulator */ - reg = regulator_get(host->dev, "vmmc_aux"); - host->vcc_aux = IS_ERR(reg) ? NULL : reg; + /* Allow an aux regulator */ + reg = devm_regulator_get_optional(host->dev, "vmmc_aux"); + host->vcc_aux = IS_ERR(reg) ? NULL : reg; - /* - * UGLY HACK: workaround regulator framework bugs. - * When the bootloader leaves a supply active, it's - * initialized with zero usecount ... and we can't - * disable it without first enabling it. Until the - * framework is fixed, we need a workaround like this - * (which is safe for MMC, but not in general). - */ - if (regulator_is_enabled(host->vcc) > 0) { - regulator_enable(host->vcc); - regulator_disable(host->vcc); - } - if (host->vcc_aux) { - if (regulator_is_enabled(reg) > 0) { - regulator_enable(reg); - regulator_disable(reg); - } - } + reg = devm_regulator_get_optional(host->dev, "pbias"); + host->pbias = IS_ERR(reg) ? NULL : reg; + + /* For eMMC do not power off when not in sleep state */ + if (mmc_slot(host).no_regulator_off_init) + return 0; + /* + * To disable boot_on regulator, enable regulator + * to increase usecount and then disable it. + */ + if ((host->vcc && regulator_is_enabled(host->vcc) > 0) || + (host->vcc_aux && regulator_is_enabled(host->vcc_aux))) { + int vdd = ffs(mmc_slot(host).ocr_mask) - 1; + + mmc_slot(host).set_power(host->dev, host->slot_id, 1, vdd); + mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0); } return 0; - -err: - mmc_slot(host).set_power = NULL; - mmc_slot(host).set_sleep = NULL; - return ret; } static void omap_hsmmc_reg_put(struct omap_hsmmc_host *host) { - regulator_put(host->vcc); - regulator_put(host->vcc_aux); mmc_slot(host).set_power = NULL; - mmc_slot(host).set_sleep = NULL; } static inline int omap_hsmmc_have_reg(void) @@ -530,6 +488,15 @@ static void omap_hsmmc_gpio_free(struct omap_mmc_platform_data *pdata) } /* + * Start clock to the card + */ +static void omap_hsmmc_start_clock(struct omap_hsmmc_host *host) +{ + OMAP_HSMMC_WRITE(host->base, SYSCTL, + OMAP_HSMMC_READ(host->base, SYSCTL) | CEN); +} + +/* * Stop clock to the card */ static void omap_hsmmc_stop_clock(struct omap_hsmmc_host *host) @@ -537,7 +504,7 @@ static void omap_hsmmc_stop_clock(struct omap_hsmmc_host *host) OMAP_HSMMC_WRITE(host->base, SYSCTL, OMAP_HSMMC_READ(host->base, SYSCTL) & ~CEN); if ((OMAP_HSMMC_READ(host->base, SYSCTL) & CEN) != 0x0) - dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stoped\n"); + dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stopped\n"); } static void omap_hsmmc_enable_irq(struct omap_hsmmc_host *host, @@ -546,13 +513,13 @@ static void omap_hsmmc_enable_irq(struct omap_hsmmc_host *host, unsigned int irq_mask; if (host->use_dma) - irq_mask = INT_EN_MASK & ~(BRR_ENABLE | BWR_ENABLE); + irq_mask = INT_EN_MASK & ~(BRR_EN | BWR_EN); else irq_mask = INT_EN_MASK; /* Disable timeout for erases */ if (cmd->opcode == MMC_ERASE) - irq_mask &= ~DTO_ENABLE; + irq_mask &= ~DTO_EN; OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR); OMAP_HSMMC_WRITE(host->base, ISE, irq_mask); @@ -566,6 +533,108 @@ static void omap_hsmmc_disable_irq(struct omap_hsmmc_host *host) OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR); } +/* Calculate divisor for the given clock frequency */ +static u16 calc_divisor(struct omap_hsmmc_host *host, struct mmc_ios *ios) +{ + u16 dsor = 0; + + if (ios->clock) { + dsor = DIV_ROUND_UP(clk_get_rate(host->fclk), ios->clock); + if (dsor > CLKD_MAX) + dsor = CLKD_MAX; + } + + return dsor; +} + +static void omap_hsmmc_set_clock(struct omap_hsmmc_host *host) +{ + struct mmc_ios *ios = &host->mmc->ios; + unsigned long regval; + unsigned long timeout; + unsigned long clkdiv; + + dev_vdbg(mmc_dev(host->mmc), "Set clock to %uHz\n", ios->clock); + + omap_hsmmc_stop_clock(host); + + regval = OMAP_HSMMC_READ(host->base, SYSCTL); + regval = regval & ~(CLKD_MASK | DTO_MASK); + clkdiv = calc_divisor(host, ios); + regval = regval | (clkdiv << 6) | (DTO << 16); + OMAP_HSMMC_WRITE(host->base, SYSCTL, regval); + OMAP_HSMMC_WRITE(host->base, SYSCTL, + OMAP_HSMMC_READ(host->base, SYSCTL) | ICE); + + /* Wait till the ICS bit is set */ + timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS); + while ((OMAP_HSMMC_READ(host->base, SYSCTL) & ICS) != ICS + && time_before(jiffies, timeout)) + cpu_relax(); + + /* + * Enable High-Speed Support + * Pre-Requisites + * - Controller should support High-Speed-Enable Bit + * - Controller should not be using DDR Mode + * - Controller should advertise that it supports High Speed + * in capabilities register + * - MMC/SD clock coming out of controller > 25MHz + */ + if ((mmc_slot(host).features & HSMMC_HAS_HSPE_SUPPORT) && + (ios->timing != MMC_TIMING_MMC_DDR52) && + ((OMAP_HSMMC_READ(host->base, CAPA) & HSS) == HSS)) { + regval = OMAP_HSMMC_READ(host->base, HCTL); + if (clkdiv && (clk_get_rate(host->fclk)/clkdiv) > 25000000) + regval |= HSPE; + else + regval &= ~HSPE; + + OMAP_HSMMC_WRITE(host->base, HCTL, regval); + } + + omap_hsmmc_start_clock(host); +} + +static void omap_hsmmc_set_bus_width(struct omap_hsmmc_host *host) +{ + struct mmc_ios *ios = &host->mmc->ios; + u32 con; + + con = OMAP_HSMMC_READ(host->base, CON); + if (ios->timing == MMC_TIMING_MMC_DDR52) + con |= DDR; /* configure in DDR mode */ + else + con &= ~DDR; + switch (ios->bus_width) { + case MMC_BUS_WIDTH_8: + OMAP_HSMMC_WRITE(host->base, CON, con | DW8); + break; + case MMC_BUS_WIDTH_4: + OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8); + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) | FOUR_BIT); + break; + case MMC_BUS_WIDTH_1: + OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8); + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) & ~FOUR_BIT); + break; + } +} + +static void omap_hsmmc_set_bus_mode(struct omap_hsmmc_host *host) +{ + struct mmc_ios *ios = &host->mmc->ios; + u32 con; + + con = OMAP_HSMMC_READ(host->base, CON); + if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) + OMAP_HSMMC_WRITE(host->base, CON, con | OD); + else + OMAP_HSMMC_WRITE(host->base, CON, con & ~OD); +} + #ifdef CONFIG_PM /* @@ -575,40 +644,18 @@ static void omap_hsmmc_disable_irq(struct omap_hsmmc_host *host) static int omap_hsmmc_context_restore(struct omap_hsmmc_host *host) { struct mmc_ios *ios = &host->mmc->ios; - struct omap_mmc_platform_data *pdata = host->pdata; - int context_loss = 0; - u32 hctl, capa, con; - u16 dsor = 0; + u32 hctl, capa; unsigned long timeout; - if (pdata->get_context_loss_count) { - context_loss = pdata->get_context_loss_count(host->dev); - if (context_loss < 0) - return 1; - } - - dev_dbg(mmc_dev(host->mmc), "context was %slost\n", - context_loss == host->context_loss ? "not " : ""); - if (host->context_loss == context_loss) - return 1; - - /* Wait for hardware reset */ - timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS); - while ((OMAP_HSMMC_READ(host->base, SYSSTATUS) & RESETDONE) != RESETDONE - && time_before(jiffies, timeout)) - ; - - /* Do software reset */ - OMAP_HSMMC_WRITE(host->base, SYSCONFIG, SOFTRESET); - timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS); - while ((OMAP_HSMMC_READ(host->base, SYSSTATUS) & RESETDONE) != RESETDONE - && time_before(jiffies, timeout)) - ; + if (host->con == OMAP_HSMMC_READ(host->base, CON) && + host->hctl == OMAP_HSMMC_READ(host->base, HCTL) && + host->sysctl == OMAP_HSMMC_READ(host->base, SYSCTL) && + host->capa == OMAP_HSMMC_READ(host->base, CAPA)) + return 0; - OMAP_HSMMC_WRITE(host->base, SYSCONFIG, - OMAP_HSMMC_READ(host->base, SYSCONFIG) | AUTOIDLE); + host->context_loss++; - if (host->id == OMAP_MMC1_DEVID) { + if (host->pdata->controller_flags & OMAP_HSMMC_SUPPORTS_DUAL_VOLT) { if (host->power_mode != MMC_POWER_OFF && (1 << ios->vdd) <= MMC_VDD_23_24) hctl = SDVS18; @@ -640,58 +687,15 @@ static int omap_hsmmc_context_restore(struct omap_hsmmc_host *host) if (host->power_mode == MMC_POWER_OFF) goto out; - con = OMAP_HSMMC_READ(host->base, CON); - switch (ios->bus_width) { - case MMC_BUS_WIDTH_8: - OMAP_HSMMC_WRITE(host->base, CON, con | DW8); - break; - case MMC_BUS_WIDTH_4: - OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8); - OMAP_HSMMC_WRITE(host->base, HCTL, - OMAP_HSMMC_READ(host->base, HCTL) | FOUR_BIT); - break; - case MMC_BUS_WIDTH_1: - OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8); - OMAP_HSMMC_WRITE(host->base, HCTL, - OMAP_HSMMC_READ(host->base, HCTL) & ~FOUR_BIT); - break; - } - - if (ios->clock) { - dsor = OMAP_MMC_MASTER_CLOCK / ios->clock; - if (dsor < 1) - dsor = 1; - - if (OMAP_MMC_MASTER_CLOCK / dsor > ios->clock) - dsor++; - - if (dsor > 250) - dsor = 250; - } - - OMAP_HSMMC_WRITE(host->base, SYSCTL, - OMAP_HSMMC_READ(host->base, SYSCTL) & ~CEN); - OMAP_HSMMC_WRITE(host->base, SYSCTL, (dsor << 6) | (DTO << 16)); - OMAP_HSMMC_WRITE(host->base, SYSCTL, - OMAP_HSMMC_READ(host->base, SYSCTL) | ICE); + omap_hsmmc_set_bus_width(host); - timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS); - while ((OMAP_HSMMC_READ(host->base, SYSCTL) & ICS) != ICS - && time_before(jiffies, timeout)) - ; + omap_hsmmc_set_clock(host); - OMAP_HSMMC_WRITE(host->base, SYSCTL, - OMAP_HSMMC_READ(host->base, SYSCTL) | CEN); + omap_hsmmc_set_bus_mode(host); - con = OMAP_HSMMC_READ(host->base, CON); - if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) - OMAP_HSMMC_WRITE(host->base, CON, con | OD); - else - OMAP_HSMMC_WRITE(host->base, CON, con & ~OD); out: - host->context_loss = context_loss; - - dev_dbg(mmc_dev(host->mmc), "context is restored\n"); + dev_dbg(mmc_dev(host->mmc), "context is restored: restore count %d\n", + host->context_loss); return 0; } @@ -700,15 +704,10 @@ out: */ static void omap_hsmmc_context_save(struct omap_hsmmc_host *host) { - struct omap_mmc_platform_data *pdata = host->pdata; - int context_loss; - - if (pdata->get_context_loss_count) { - context_loss = pdata->get_context_loss_count(host->dev); - if (context_loss < 0) - return; - host->context_loss = context_loss; - } + host->con = OMAP_HSMMC_READ(host->base, CON); + host->hctl = OMAP_HSMMC_READ(host->base, HCTL); + host->sysctl = OMAP_HSMMC_READ(host->base, SYSCTL); + host->capa = OMAP_HSMMC_READ(host->base, CAPA); } #else @@ -744,8 +743,8 @@ static void send_init_stream(struct omap_hsmmc_host *host) OMAP_HSMMC_WRITE(host->base, CMD, INIT_STREAM_CMD); timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS); - while ((reg != CC) && time_before(jiffies, timeout)) - reg = OMAP_HSMMC_READ(host->base, STAT) & CC; + while ((reg != CC_EN) && time_before(jiffies, timeout)) + reg = OMAP_HSMMC_READ(host->base, STAT) & CC_EN; OMAP_HSMMC_WRITE(host->base, CON, OMAP_HSMMC_READ(host->base, CON) & ~INIT_STREAM); @@ -800,7 +799,7 @@ omap_hsmmc_start_command(struct omap_hsmmc_host *host, struct mmc_command *cmd, { int cmdreg = 0, resptype = 0, cmdtype = 0; - dev_dbg(mmc_dev(host->mmc), "%s: CMD%d, argument 0x%08x\n", + dev_vdbg(mmc_dev(host->mmc), "%s: CMD%d, argument 0x%08x\n", mmc_hostname(host->mmc), cmd->opcode, cmd->arg); host->cmd = cmd; @@ -827,6 +826,11 @@ omap_hsmmc_start_command(struct omap_hsmmc_host *host, struct mmc_command *cmd, cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22); + if ((host->flags & AUTO_CMD23) && mmc_op_multi(cmd->opcode) && + host->mrq->sbc) { + cmdreg |= ACEN_ACMD23; + OMAP_HSMMC_WRITE(host->base, SDMASA, host->mrq->sbc->arg); + } if (data) { cmdreg |= DP_SELECT | MSBS | BCE; if (data->flags & MMC_DATA_READ) @@ -836,7 +840,7 @@ omap_hsmmc_start_command(struct omap_hsmmc_host *host, struct mmc_command *cmd, } if (host->use_dma) - cmdreg |= DMA_EN; + cmdreg |= DMAE; host->req_in_progress = 1; @@ -853,14 +857,21 @@ omap_hsmmc_get_dma_dir(struct omap_hsmmc_host *host, struct mmc_data *data) return DMA_FROM_DEVICE; } +static struct dma_chan *omap_hsmmc_get_dma_chan(struct omap_hsmmc_host *host, + struct mmc_data *data) +{ + return data->flags & MMC_DATA_WRITE ? host->tx_chan : host->rx_chan; +} + static void omap_hsmmc_request_done(struct omap_hsmmc_host *host, struct mmc_request *mrq) { int dma_ch; + unsigned long flags; - spin_lock(&host->irq_lock); + spin_lock_irqsave(&host->irq_lock, flags); host->req_in_progress = 0; dma_ch = host->dma_ch; - spin_unlock(&host->irq_lock); + spin_unlock_irqrestore(&host->irq_lock, flags); omap_hsmmc_disable_irq(host); /* Do not complete the request if DMA is still in progress */ @@ -897,11 +908,10 @@ omap_hsmmc_xfer_done(struct omap_hsmmc_host *host, struct mmc_data *data) else data->bytes_xfered = 0; - if (!data->stop) { + if (data->stop && (data->error || !host->mrq->sbc)) + omap_hsmmc_start_command(host, data->stop, NULL); + else omap_hsmmc_request_done(host, data->mrq); - return; - } - omap_hsmmc_start_command(host, data->stop, NULL); } /* @@ -910,6 +920,15 @@ omap_hsmmc_xfer_done(struct omap_hsmmc_host *host, struct mmc_data *data) static void omap_hsmmc_cmd_done(struct omap_hsmmc_host *host, struct mmc_command *cmd) { + if (host->mrq->sbc && (host->cmd == host->mrq->sbc) && + !host->mrq->sbc->error && !(host->flags & AUTO_CMD23)) { + host->cmd = NULL; + omap_hsmmc_start_dma_transfer(host); + omap_hsmmc_start_command(host, host->mrq->cmd, + host->mrq->data); + return; + } + host->cmd = NULL; if (cmd->flags & MMC_RSP_PRESENT) { @@ -925,7 +944,7 @@ omap_hsmmc_cmd_done(struct omap_hsmmc_host *host, struct mmc_command *cmd) } } if ((host->data == NULL && !host->response_busy) || cmd->error) - omap_hsmmc_request_done(host, cmd->mrq); + omap_hsmmc_request_done(host, host->mrq); } /* @@ -934,18 +953,24 @@ omap_hsmmc_cmd_done(struct omap_hsmmc_host *host, struct mmc_command *cmd) static void omap_hsmmc_dma_cleanup(struct omap_hsmmc_host *host, int errno) { int dma_ch; + unsigned long flags; host->data->error = errno; - spin_lock(&host->irq_lock); + spin_lock_irqsave(&host->irq_lock, flags); dma_ch = host->dma_ch; host->dma_ch = -1; - spin_unlock(&host->irq_lock); + spin_unlock_irqrestore(&host->irq_lock, flags); if (host->use_dma && dma_ch != -1) { - dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, host->dma_len, + struct dma_chan *chan = omap_hsmmc_get_dma_chan(host, host->data); + + dmaengine_terminate_all(chan); + dma_unmap_sg(chan->device->dev, + host->data->sg, host->data->sg_len, omap_hsmmc_get_dma_dir(host, host->data)); - omap_free_dma(dma_ch); + + host->data->host_cookie = 0; } host->data = NULL; } @@ -954,14 +979,14 @@ static void omap_hsmmc_dma_cleanup(struct omap_hsmmc_host *host, int errno) * Readable error output */ #ifdef CONFIG_MMC_DEBUG -static void omap_hsmmc_report_irq(struct omap_hsmmc_host *host, u32 status) +static void omap_hsmmc_dbg_report_irq(struct omap_hsmmc_host *host, u32 status) { /* --- means reserved bit without definition at documentation */ static const char *omap_hsmmc_status_bits[] = { - "CC", "TC", "BGE", "---", "BWR", "BRR", "---", "---", "CIRQ", - "OBI", "---", "---", "---", "---", "---", "ERRI", "CTO", "CCRC", - "CEB", "CIE", "DTO", "DCRC", "DEB", "---", "ACE", "---", - "---", "---", "---", "CERR", "CERR", "BADA", "---", "---", "---" + "CC" , "TC" , "BGE", "---", "BWR" , "BRR" , "---" , "---" , + "CIRQ", "OBI" , "---", "---", "---" , "---" , "---" , "ERRI", + "CTO" , "CCRC", "CEB", "CIE", "DTO" , "DCRC", "DEB" , "---" , + "ACE" , "---" , "---", "---", "CERR", "BADA", "---" , "---" }; char res[256]; char *buf = res; @@ -976,7 +1001,12 @@ static void omap_hsmmc_report_irq(struct omap_hsmmc_host *host, u32 status) buf += len; } - dev_dbg(mmc_dev(host->mmc), "%s\n", res); + dev_vdbg(mmc_dev(host->mmc), "%s\n", res); +} +#else +static inline void omap_hsmmc_dbg_report_irq(struct omap_hsmmc_host *host, + u32 status) +{ } #endif /* CONFIG_MMC_DEBUG */ @@ -991,8 +1021,7 @@ static inline void omap_hsmmc_reset_controller_fsm(struct omap_hsmmc_host *host, unsigned long bit) { unsigned long i = 0; - unsigned long limit = (loops_per_jiffy * - msecs_to_jiffies(MMC_TIMEOUT_MS)); + unsigned long limit = MMC_TIMEOUT_US; OMAP_HSMMC_WRITE(host->base, SYSCTL, OMAP_HSMMC_READ(host->base, SYSCTL) | bit); @@ -1002,15 +1031,15 @@ static inline void omap_hsmmc_reset_controller_fsm(struct omap_hsmmc_host *host, * Monitor a 0->1 transition first */ if (mmc_slot(host).features & HSMMC_HAS_UPDATED_RESET) { - while ((!(OMAP_HSMMC_READ(host, SYSCTL) & bit)) + while ((!(OMAP_HSMMC_READ(host->base, SYSCTL) & bit)) && (i++ < limit)) - cpu_relax(); + udelay(1); } i = 0; while ((OMAP_HSMMC_READ(host->base, SYSCTL) & bit) && (i++ < limit)) - cpu_relax(); + udelay(1); if (OMAP_HSMMC_READ(host->base, SYSCTL) & bit) dev_err(mmc_dev(host->mmc), @@ -1018,77 +1047,65 @@ static inline void omap_hsmmc_reset_controller_fsm(struct omap_hsmmc_host *host, __func__); } +static void hsmmc_command_incomplete(struct omap_hsmmc_host *host, + int err, int end_cmd) +{ + if (end_cmd) { + omap_hsmmc_reset_controller_fsm(host, SRC); + if (host->cmd) + host->cmd->error = err; + } + + if (host->data) { + omap_hsmmc_reset_controller_fsm(host, SRD); + omap_hsmmc_dma_cleanup(host, err); + } else if (host->mrq && host->mrq->cmd) + host->mrq->cmd->error = err; +} + static void omap_hsmmc_do_irq(struct omap_hsmmc_host *host, int status) { struct mmc_data *data; int end_cmd = 0, end_trans = 0; - - if (!host->req_in_progress) { - do { - OMAP_HSMMC_WRITE(host->base, STAT, status); - /* Flush posted write */ - status = OMAP_HSMMC_READ(host->base, STAT); - } while (status & INT_EN_MASK); - return; - } + int error = 0; data = host->data; - dev_dbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status); - - if (status & ERR) { -#ifdef CONFIG_MMC_DEBUG - omap_hsmmc_report_irq(host, status); -#endif - if ((status & CMD_TIMEOUT) || - (status & CMD_CRC)) { - if (host->cmd) { - if (status & CMD_TIMEOUT) { - omap_hsmmc_reset_controller_fsm(host, - SRC); - host->cmd->error = -ETIMEDOUT; - } else { - host->cmd->error = -EILSEQ; - } + dev_vdbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status); + + if (status & ERR_EN) { + omap_hsmmc_dbg_report_irq(host, status); + + if (status & (CTO_EN | CCRC_EN)) + end_cmd = 1; + if (status & (CTO_EN | DTO_EN)) + hsmmc_command_incomplete(host, -ETIMEDOUT, end_cmd); + else if (status & (CCRC_EN | DCRC_EN)) + hsmmc_command_incomplete(host, -EILSEQ, end_cmd); + + if (status & ACE_EN) { + u32 ac12; + ac12 = OMAP_HSMMC_READ(host->base, AC12); + if (!(ac12 & ACNE) && host->mrq->sbc) { end_cmd = 1; + if (ac12 & ACTO) + error = -ETIMEDOUT; + else if (ac12 & (ACCE | ACEB | ACIE)) + error = -EILSEQ; + host->mrq->sbc->error = error; + hsmmc_command_incomplete(host, error, end_cmd); } - if (host->data || host->response_busy) { - if (host->data) - omap_hsmmc_dma_cleanup(host, - -ETIMEDOUT); - host->response_busy = 0; - omap_hsmmc_reset_controller_fsm(host, SRD); - } + dev_dbg(mmc_dev(host->mmc), "AC12 err: 0x%x\n", ac12); } - if ((status & DATA_TIMEOUT) || - (status & DATA_CRC)) { - if (host->data || host->response_busy) { - int err = (status & DATA_TIMEOUT) ? - -ETIMEDOUT : -EILSEQ; - - if (host->data) - omap_hsmmc_dma_cleanup(host, err); - else - host->mrq->cmd->error = err; - host->response_busy = 0; - omap_hsmmc_reset_controller_fsm(host, SRD); - end_trans = 1; - } - } - if (status & CARD_ERR) { - dev_dbg(mmc_dev(host->mmc), - "Ignoring card err CMD%d\n", host->cmd->opcode); - if (host->cmd) - end_cmd = 1; - if (host->data) - end_trans = 1; + if (host->data || host->response_busy) { + end_trans = !end_cmd; + host->response_busy = 0; } } OMAP_HSMMC_WRITE(host->base, STAT, status); - - if (end_cmd || ((status & CC) && host->cmd)) + if (end_cmd || ((status & CC_EN) && host->cmd)) omap_hsmmc_cmd_done(host, host->cmd); - if ((end_trans || (status & TC)) && host->mrq) + if ((end_trans || (status & TC_EN)) && host->mrq) omap_hsmmc_xfer_done(host, data); } @@ -1101,11 +1118,12 @@ static irqreturn_t omap_hsmmc_irq(int irq, void *dev_id) int status; status = OMAP_HSMMC_READ(host->base, STAT); - do { + while (status & INT_EN_MASK && host->req_in_progress) { omap_hsmmc_do_irq(host, status); + /* Flush posted write */ status = OMAP_HSMMC_READ(host->base, STAT); - } while (status & INT_EN_MASK); + } return IRQ_HANDLED; } @@ -1136,10 +1154,9 @@ static int omap_hsmmc_switch_opcond(struct omap_hsmmc_host *host, int vdd) int ret; /* Disable the clocks */ - clk_disable(host->fclk); - clk_disable(host->iclk); - if (host->got_dbclk) - clk_disable(host->dbclk); + pm_runtime_put_sync(host->dev); + if (host->dbclk) + clk_disable_unprepare(host->dbclk); /* Turn the power off */ ret = mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0); @@ -1148,10 +1165,9 @@ static int omap_hsmmc_switch_opcond(struct omap_hsmmc_host *host, int vdd) if (!ret) ret = mmc_slot(host).set_power(host->dev, host->slot_id, 1, vdd); - clk_enable(host->iclk); - clk_enable(host->fclk); - if (host->got_dbclk) - clk_enable(host->dbclk); + pm_runtime_get_sync(host->dev); + if (host->dbclk) + clk_prepare_enable(host->dbclk); if (ret != 0) goto err; @@ -1185,7 +1201,7 @@ static int omap_hsmmc_switch_opcond(struct omap_hsmmc_host *host, int vdd) return 0; err: - dev_dbg(mmc_dev(host->mmc), "Unable to switch operating voltage\n"); + dev_err(mmc_dev(host->mmc), "Unable to switch operating voltage\n"); return ret; } @@ -1198,14 +1214,14 @@ static void omap_hsmmc_protect_card(struct omap_hsmmc_host *host) host->reqs_blocked = 0; if (mmc_slot(host).get_cover_state(host->dev, host->slot_id)) { if (host->protect_card) { - printk(KERN_INFO "%s: cover is closed, " + dev_info(host->dev, "%s: cover is closed, " "card is now accessible\n", mmc_hostname(host->mmc)); host->protect_card = 0; } } else { if (!host->protect_card) { - printk(KERN_INFO "%s: cover is open, " + dev_info(host->dev, "%s: cover is open, " "card is now inaccessible\n", mmc_hostname(host->mmc)); host->protect_card = 1; @@ -1214,18 +1230,14 @@ static void omap_hsmmc_protect_card(struct omap_hsmmc_host *host) } /* - * Work Item to notify the core about card insertion/removal + * irq handler to notify the core about card insertion/removal */ -static void omap_hsmmc_detect(struct work_struct *work) +static irqreturn_t omap_hsmmc_detect(int irq, void *dev_id) { - struct omap_hsmmc_host *host = - container_of(work, struct omap_hsmmc_host, mmc_carddetect_work); + struct omap_hsmmc_host *host = dev_id; struct omap_mmc_slot_data *slot = &mmc_slot(host); int carddetect; - if (host->suspended) - return; - sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch"); if (slot->card_detect) @@ -1239,121 +1251,91 @@ static void omap_hsmmc_detect(struct work_struct *work) mmc_detect_change(host->mmc, (HZ * 200) / 1000); else mmc_detect_change(host->mmc, (HZ * 50) / 1000); -} - -/* - * ISR for handling card insertion and removal - */ -static irqreturn_t omap_hsmmc_cd_handler(int irq, void *dev_id) -{ - struct omap_hsmmc_host *host = (struct omap_hsmmc_host *)dev_id; - - if (host->suspended) - return IRQ_HANDLED; - schedule_work(&host->mmc_carddetect_work); - return IRQ_HANDLED; } -static int omap_hsmmc_get_dma_sync_dev(struct omap_hsmmc_host *host, - struct mmc_data *data) +static void omap_hsmmc_dma_callback(void *param) { - int sync_dev; - - if (data->flags & MMC_DATA_WRITE) - sync_dev = host->dma_line_tx; - else - sync_dev = host->dma_line_rx; - return sync_dev; -} - -static void omap_hsmmc_config_dma_params(struct omap_hsmmc_host *host, - struct mmc_data *data, - struct scatterlist *sgl) -{ - int blksz, nblk, dma_ch; + struct omap_hsmmc_host *host = param; + struct dma_chan *chan; + struct mmc_data *data; + int req_in_progress; - dma_ch = host->dma_ch; - if (data->flags & MMC_DATA_WRITE) { - omap_set_dma_dest_params(dma_ch, 0, OMAP_DMA_AMODE_CONSTANT, - (host->mapbase + OMAP_HSMMC_DATA), 0, 0); - omap_set_dma_src_params(dma_ch, 0, OMAP_DMA_AMODE_POST_INC, - sg_dma_address(sgl), 0, 0); - } else { - omap_set_dma_src_params(dma_ch, 0, OMAP_DMA_AMODE_CONSTANT, - (host->mapbase + OMAP_HSMMC_DATA), 0, 0); - omap_set_dma_dest_params(dma_ch, 0, OMAP_DMA_AMODE_POST_INC, - sg_dma_address(sgl), 0, 0); + spin_lock_irq(&host->irq_lock); + if (host->dma_ch < 0) { + spin_unlock_irq(&host->irq_lock); + return; } - blksz = host->data->blksz; - nblk = sg_dma_len(sgl) / blksz; + data = host->mrq->data; + chan = omap_hsmmc_get_dma_chan(host, data); + if (!data->host_cookie) + dma_unmap_sg(chan->device->dev, + data->sg, data->sg_len, + omap_hsmmc_get_dma_dir(host, data)); + + req_in_progress = host->req_in_progress; + host->dma_ch = -1; + spin_unlock_irq(&host->irq_lock); - omap_set_dma_transfer_params(dma_ch, OMAP_DMA_DATA_TYPE_S32, - blksz / 4, nblk, OMAP_DMA_SYNC_FRAME, - omap_hsmmc_get_dma_sync_dev(host, data), - !(data->flags & MMC_DATA_WRITE)); + /* If DMA has finished after TC, complete the request */ + if (!req_in_progress) { + struct mmc_request *mrq = host->mrq; - omap_start_dma(dma_ch); + host->mrq = NULL; + mmc_request_done(host->mmc, mrq); + } } -/* - * DMA call back function - */ -static void omap_hsmmc_dma_cb(int lch, u16 ch_status, void *cb_data) +static int omap_hsmmc_pre_dma_transfer(struct omap_hsmmc_host *host, + struct mmc_data *data, + struct omap_hsmmc_next *next, + struct dma_chan *chan) { - struct omap_hsmmc_host *host = cb_data; - struct mmc_data *data = host->mrq->data; - int dma_ch, req_in_progress; + int dma_len; - if (!(ch_status & OMAP_DMA_BLOCK_IRQ)) { - dev_warn(mmc_dev(host->mmc), "unexpected dma status %x\n", - ch_status); - return; + if (!next && data->host_cookie && + data->host_cookie != host->next_data.cookie) { + dev_warn(host->dev, "[%s] invalid cookie: data->host_cookie %d" + " host->next_data.cookie %d\n", + __func__, data->host_cookie, host->next_data.cookie); + data->host_cookie = 0; } - spin_lock(&host->irq_lock); - if (host->dma_ch < 0) { - spin_unlock(&host->irq_lock); - return; - } + /* Check if next job is already prepared */ + if (next || data->host_cookie != host->next_data.cookie) { + dma_len = dma_map_sg(chan->device->dev, data->sg, data->sg_len, + omap_hsmmc_get_dma_dir(host, data)); - host->dma_sg_idx++; - if (host->dma_sg_idx < host->dma_len) { - /* Fire up the next transfer. */ - omap_hsmmc_config_dma_params(host, data, - data->sg + host->dma_sg_idx); - spin_unlock(&host->irq_lock); - return; + } else { + dma_len = host->next_data.dma_len; + host->next_data.dma_len = 0; } - dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len, - omap_hsmmc_get_dma_dir(host, data)); - req_in_progress = host->req_in_progress; - dma_ch = host->dma_ch; - host->dma_ch = -1; - spin_unlock(&host->irq_lock); - - omap_free_dma(dma_ch); + if (dma_len == 0) + return -EINVAL; - /* If DMA has finished after TC, complete the request */ - if (!req_in_progress) { - struct mmc_request *mrq = host->mrq; + if (next) { + next->dma_len = dma_len; + data->host_cookie = ++next->cookie < 0 ? 1 : next->cookie; + } else + host->dma_len = dma_len; - host->mrq = NULL; - mmc_request_done(host->mmc, mrq); - } + return 0; } /* * Routine to configure and start DMA for the MMC card */ -static int omap_hsmmc_start_dma_transfer(struct omap_hsmmc_host *host, +static int omap_hsmmc_setup_dma_transfer(struct omap_hsmmc_host *host, struct mmc_request *req) { - int dma_ch = 0, ret = 0, i; + struct dma_slave_config cfg; + struct dma_async_tx_descriptor *tx; + int ret = 0, i; struct mmc_data *data = req->data; + struct dma_chan *chan; /* Sanity check: all the SG entries must be aligned by block size. */ for (i = 0; i < data->sg_len; i++) { @@ -1371,21 +1353,39 @@ static int omap_hsmmc_start_dma_transfer(struct omap_hsmmc_host *host, BUG_ON(host->dma_ch != -1); - ret = omap_request_dma(omap_hsmmc_get_dma_sync_dev(host, data), - "MMC/SD", omap_hsmmc_dma_cb, host, &dma_ch); - if (ret != 0) { - dev_err(mmc_dev(host->mmc), - "%s: omap_request_dma() failed with %d\n", - mmc_hostname(host->mmc), ret); + chan = omap_hsmmc_get_dma_chan(host, data); + + cfg.src_addr = host->mapbase + OMAP_HSMMC_DATA; + cfg.dst_addr = host->mapbase + OMAP_HSMMC_DATA; + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + cfg.src_maxburst = data->blksz / 4; + cfg.dst_maxburst = data->blksz / 4; + + ret = dmaengine_slave_config(chan, &cfg); + if (ret) + return ret; + + ret = omap_hsmmc_pre_dma_transfer(host, data, NULL, chan); + if (ret) return ret; + + tx = dmaengine_prep_slave_sg(chan, data->sg, data->sg_len, + data->flags & MMC_DATA_WRITE ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!tx) { + dev_err(mmc_dev(host->mmc), "prep_slave_sg() failed\n"); + /* FIXME: cleanup */ + return -1; } - host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, - data->sg_len, omap_hsmmc_get_dma_dir(host, data)); - host->dma_ch = dma_ch; - host->dma_sg_idx = 0; + tx->callback = omap_hsmmc_dma_callback; + tx->callback_param = host; + + /* Does not fail */ + dmaengine_submit(tx); - omap_hsmmc_config_dma_params(host, data, data->sg); + host->dma_ch = 1; return 0; } @@ -1402,7 +1402,7 @@ static void set_data_timeout(struct omap_hsmmc_host *host, if (clkd == 0) clkd = 1; - cycle_ns = 1000000000 / (clk_get_rate(host->fclk) / clkd); + cycle_ns = 1000000000 / (host->clk_rate / clkd); timeout = timeout_ns / cycle_ns; timeout += timeout_clks; if (timeout) { @@ -1427,6 +1427,21 @@ static void set_data_timeout(struct omap_hsmmc_host *host, OMAP_HSMMC_WRITE(host->base, SYSCTL, reg); } +static void omap_hsmmc_start_dma_transfer(struct omap_hsmmc_host *host) +{ + struct mmc_request *req = host->mrq; + struct dma_chan *chan; + + if (!req->data) + return; + OMAP_HSMMC_WRITE(host->base, BLK, (req->data->blksz) + | (req->data->blocks << 16)); + set_data_timeout(host, req->data->timeout_ns, + req->data->timeout_clks); + chan = omap_hsmmc_get_dma_chan(host, req->data); + dma_async_issue_pending(chan); +} + /* * Configure block length for MMC/SD cards and initiate the transfer. */ @@ -1447,20 +1462,50 @@ omap_hsmmc_prepare_data(struct omap_hsmmc_host *host, struct mmc_request *req) return 0; } - OMAP_HSMMC_WRITE(host->base, BLK, (req->data->blksz) - | (req->data->blocks << 16)); - set_data_timeout(host, req->data->timeout_ns, req->data->timeout_clks); - if (host->use_dma) { - ret = omap_hsmmc_start_dma_transfer(host, req); + ret = omap_hsmmc_setup_dma_transfer(host, req); if (ret != 0) { - dev_dbg(mmc_dev(host->mmc), "MMC start dma failure\n"); + dev_err(mmc_dev(host->mmc), "MMC start dma failure\n"); return ret; } } return 0; } +static void omap_hsmmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq, + int err) +{ + struct omap_hsmmc_host *host = mmc_priv(mmc); + struct mmc_data *data = mrq->data; + + if (host->use_dma && data->host_cookie) { + struct dma_chan *c = omap_hsmmc_get_dma_chan(host, data); + + dma_unmap_sg(c->device->dev, data->sg, data->sg_len, + omap_hsmmc_get_dma_dir(host, data)); + data->host_cookie = 0; + } +} + +static void omap_hsmmc_pre_req(struct mmc_host *mmc, struct mmc_request *mrq, + bool is_first_req) +{ + struct omap_hsmmc_host *host = mmc_priv(mmc); + + if (mrq->data->host_cookie) { + mrq->data->host_cookie = 0; + return ; + } + + if (host->use_dma) { + struct dma_chan *c = omap_hsmmc_get_dma_chan(host, mrq->data); + + if (omap_hsmmc_pre_dma_transfer(host, mrq->data, + &host->next_data, c)) + mrq->data->host_cookie = 0; + } +} + /* * Request function. for read/write operation */ @@ -1492,6 +1537,7 @@ static void omap_hsmmc_request(struct mmc_host *mmc, struct mmc_request *req) host->reqs_blocked = 0; WARN_ON(host->mrq != NULL); host->mrq = req; + host->clk_rate = clk_get_rate(host->fclk); err = omap_hsmmc_prepare_data(host, req); if (err) { req->cmd->error = err; @@ -1501,7 +1547,12 @@ static void omap_hsmmc_request(struct mmc_host *mmc, struct mmc_request *req) mmc_request_done(mmc, req); return; } + if (req->sbc && !(host->flags & AUTO_CMD23)) { + omap_hsmmc_start_command(host, req->sbc, NULL); + return; + } + omap_hsmmc_start_dma_transfer(host); omap_hsmmc_start_command(host, req->cmd, req->data); } @@ -1509,25 +1560,19 @@ static void omap_hsmmc_request(struct mmc_host *mmc, struct mmc_request *req) static void omap_hsmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) { struct omap_hsmmc_host *host = mmc_priv(mmc); - u16 dsor = 0; - unsigned long regval; - unsigned long timeout; - u32 con; int do_send_init_stream = 0; - mmc_host_enable(host->mmc); + pm_runtime_get_sync(host->dev); if (ios->power_mode != host->power_mode) { switch (ios->power_mode) { case MMC_POWER_OFF: mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0); - host->vdd = 0; break; case MMC_POWER_UP: mmc_slot(host).set_power(host->dev, host->slot_id, 1, ios->vdd); - host->vdd = ios->vdd; break; case MMC_POWER_ON: do_send_init_stream = 1; @@ -1538,24 +1583,9 @@ static void omap_hsmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) /* FIXME: set registers based only on changes to ios */ - con = OMAP_HSMMC_READ(host->base, CON); - switch (mmc->ios.bus_width) { - case MMC_BUS_WIDTH_8: - OMAP_HSMMC_WRITE(host->base, CON, con | DW8); - break; - case MMC_BUS_WIDTH_4: - OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8); - OMAP_HSMMC_WRITE(host->base, HCTL, - OMAP_HSMMC_READ(host->base, HCTL) | FOUR_BIT); - break; - case MMC_BUS_WIDTH_1: - OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8); - OMAP_HSMMC_WRITE(host->base, HCTL, - OMAP_HSMMC_READ(host->base, HCTL) & ~FOUR_BIT); - break; - } + omap_hsmmc_set_bus_width(host); - if (host->id == OMAP_MMC1_DEVID) { + if (host->pdata->controller_flags & OMAP_HSMMC_SUPPORTS_DUAL_VOLT) { /* Only MMC1 can interface at 3V without some flavor * of external transceiver; but they all handle 1.8V. */ @@ -1573,47 +1603,14 @@ static void omap_hsmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) } } - if (ios->clock) { - dsor = OMAP_MMC_MASTER_CLOCK / ios->clock; - if (dsor < 1) - dsor = 1; - - if (OMAP_MMC_MASTER_CLOCK / dsor > ios->clock) - dsor++; - - if (dsor > 250) - dsor = 250; - } - omap_hsmmc_stop_clock(host); - regval = OMAP_HSMMC_READ(host->base, SYSCTL); - regval = regval & ~(CLKD_MASK); - regval = regval | (dsor << 6) | (DTO << 16); - OMAP_HSMMC_WRITE(host->base, SYSCTL, regval); - OMAP_HSMMC_WRITE(host->base, SYSCTL, - OMAP_HSMMC_READ(host->base, SYSCTL) | ICE); - - /* Wait till the ICS bit is set */ - timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS); - while ((OMAP_HSMMC_READ(host->base, SYSCTL) & ICS) != ICS - && time_before(jiffies, timeout)) - msleep(1); - - OMAP_HSMMC_WRITE(host->base, SYSCTL, - OMAP_HSMMC_READ(host->base, SYSCTL) | CEN); + omap_hsmmc_set_clock(host); if (do_send_init_stream) send_init_stream(host); - con = OMAP_HSMMC_READ(host->base, CON); - if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) - OMAP_HSMMC_WRITE(host->base, CON, con | OD); - else - OMAP_HSMMC_WRITE(host->base, CON, con & ~OD); + omap_hsmmc_set_bus_mode(host); - if (host->power_mode == MMC_POWER_OFF) - mmc_host_disable(host->mmc); - else - mmc_host_lazy_disable(host->mmc); + pm_runtime_put_autosuspend(host->dev); } static int omap_hsmmc_get_cd(struct mmc_host *mmc) @@ -1647,7 +1644,7 @@ static void omap_hsmmc_conf_bus_power(struct omap_hsmmc_host *host) u32 hctl, capa, value; /* Only MMC1 supports 3.0V */ - if (host->id == OMAP_MMC1_DEVID) { + if (host->pdata->controller_flags & OMAP_HSMMC_SUPPORTS_DUAL_VOLT) { hctl = SDVS30; capa = VS30 | VS18; } else { @@ -1661,265 +1658,34 @@ static void omap_hsmmc_conf_bus_power(struct omap_hsmmc_host *host) value = OMAP_HSMMC_READ(host->base, CAPA); OMAP_HSMMC_WRITE(host->base, CAPA, value | capa); - /* Set the controller to AUTO IDLE mode */ - value = OMAP_HSMMC_READ(host->base, SYSCONFIG); - OMAP_HSMMC_WRITE(host->base, SYSCONFIG, value | AUTOIDLE); - /* Set SD bus power bit */ set_sd_bus_power(host); } -/* - * Dynamic power saving handling, FSM: - * ENABLED -> DISABLED -> CARDSLEEP / REGSLEEP -> OFF - * ^___________| | | - * |______________________|______________________| - * - * ENABLED: mmc host is fully functional - * DISABLED: fclk is off - * CARDSLEEP: fclk is off, card is asleep, voltage regulator is asleep - * REGSLEEP: fclk is off, voltage regulator is asleep - * OFF: fclk is off, voltage regulator is off - * - * Transition handlers return the timeout for the next state transition - * or negative error. - */ - -enum {ENABLED = 0, DISABLED, CARDSLEEP, REGSLEEP, OFF}; - -/* Handler for [ENABLED -> DISABLED] transition */ -static int omap_hsmmc_enabled_to_disabled(struct omap_hsmmc_host *host) -{ - omap_hsmmc_context_save(host); - clk_disable(host->fclk); - host->dpm_state = DISABLED; - - dev_dbg(mmc_dev(host->mmc), "ENABLED -> DISABLED\n"); - - if (host->power_mode == MMC_POWER_OFF) - return 0; - - return OMAP_MMC_SLEEP_TIMEOUT; -} - -/* Handler for [DISABLED -> REGSLEEP / CARDSLEEP] transition */ -static int omap_hsmmc_disabled_to_sleep(struct omap_hsmmc_host *host) -{ - int err, new_state; - - if (!mmc_try_claim_host(host->mmc)) - return 0; - - clk_enable(host->fclk); - omap_hsmmc_context_restore(host); - if (mmc_card_can_sleep(host->mmc)) { - err = mmc_card_sleep(host->mmc); - if (err < 0) { - clk_disable(host->fclk); - mmc_release_host(host->mmc); - return err; - } - new_state = CARDSLEEP; - } else { - new_state = REGSLEEP; - } - if (mmc_slot(host).set_sleep) - mmc_slot(host).set_sleep(host->dev, host->slot_id, 1, 0, - new_state == CARDSLEEP); - /* FIXME: turn off bus power and perhaps interrupts too */ - clk_disable(host->fclk); - host->dpm_state = new_state; - - mmc_release_host(host->mmc); - - dev_dbg(mmc_dev(host->mmc), "DISABLED -> %s\n", - host->dpm_state == CARDSLEEP ? "CARDSLEEP" : "REGSLEEP"); - - if (mmc_slot(host).no_off) - return 0; - - if ((host->mmc->caps & MMC_CAP_NONREMOVABLE) || - mmc_slot(host).card_detect || - (mmc_slot(host).get_cover_state && - mmc_slot(host).get_cover_state(host->dev, host->slot_id))) - return OMAP_MMC_OFF_TIMEOUT; - - return 0; -} - -/* Handler for [REGSLEEP / CARDSLEEP -> OFF] transition */ -static int omap_hsmmc_sleep_to_off(struct omap_hsmmc_host *host) -{ - if (!mmc_try_claim_host(host->mmc)) - return 0; - - if (mmc_slot(host).no_off) - return 0; - - if (!((host->mmc->caps & MMC_CAP_NONREMOVABLE) || - mmc_slot(host).card_detect || - (mmc_slot(host).get_cover_state && - mmc_slot(host).get_cover_state(host->dev, host->slot_id)))) { - mmc_release_host(host->mmc); - return 0; - } - - mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0); - host->vdd = 0; - host->power_mode = MMC_POWER_OFF; - - dev_dbg(mmc_dev(host->mmc), "%s -> OFF\n", - host->dpm_state == CARDSLEEP ? "CARDSLEEP" : "REGSLEEP"); - - host->dpm_state = OFF; - - mmc_release_host(host->mmc); - - return 0; -} - -/* Handler for [DISABLED -> ENABLED] transition */ -static int omap_hsmmc_disabled_to_enabled(struct omap_hsmmc_host *host) -{ - int err; - - err = clk_enable(host->fclk); - if (err < 0) - return err; - - omap_hsmmc_context_restore(host); - host->dpm_state = ENABLED; - - dev_dbg(mmc_dev(host->mmc), "DISABLED -> ENABLED\n"); - - return 0; -} - -/* Handler for [SLEEP -> ENABLED] transition */ -static int omap_hsmmc_sleep_to_enabled(struct omap_hsmmc_host *host) -{ - if (!mmc_try_claim_host(host->mmc)) - return 0; - - clk_enable(host->fclk); - omap_hsmmc_context_restore(host); - if (mmc_slot(host).set_sleep) - mmc_slot(host).set_sleep(host->dev, host->slot_id, 0, - host->vdd, host->dpm_state == CARDSLEEP); - if (mmc_card_can_sleep(host->mmc)) - mmc_card_awake(host->mmc); - - dev_dbg(mmc_dev(host->mmc), "%s -> ENABLED\n", - host->dpm_state == CARDSLEEP ? "CARDSLEEP" : "REGSLEEP"); - - host->dpm_state = ENABLED; - - mmc_release_host(host->mmc); - - return 0; -} - -/* Handler for [OFF -> ENABLED] transition */ -static int omap_hsmmc_off_to_enabled(struct omap_hsmmc_host *host) -{ - clk_enable(host->fclk); - - omap_hsmmc_context_restore(host); - omap_hsmmc_conf_bus_power(host); - mmc_power_restore_host(host->mmc); - - host->dpm_state = ENABLED; - - dev_dbg(mmc_dev(host->mmc), "OFF -> ENABLED\n"); - - return 0; -} - -/* - * Bring MMC host to ENABLED from any other PM state. - */ -static int omap_hsmmc_enable(struct mmc_host *mmc) -{ - struct omap_hsmmc_host *host = mmc_priv(mmc); - - switch (host->dpm_state) { - case DISABLED: - return omap_hsmmc_disabled_to_enabled(host); - case CARDSLEEP: - case REGSLEEP: - return omap_hsmmc_sleep_to_enabled(host); - case OFF: - return omap_hsmmc_off_to_enabled(host); - default: - dev_dbg(mmc_dev(host->mmc), "UNKNOWN state\n"); - return -EINVAL; - } -} - -/* - * Bring MMC host in PM state (one level deeper). - */ -static int omap_hsmmc_disable(struct mmc_host *mmc, int lazy) -{ - struct omap_hsmmc_host *host = mmc_priv(mmc); - - switch (host->dpm_state) { - case ENABLED: { - int delay; - - delay = omap_hsmmc_enabled_to_disabled(host); - if (lazy || delay < 0) - return delay; - return 0; - } - case DISABLED: - return omap_hsmmc_disabled_to_sleep(host); - case CARDSLEEP: - case REGSLEEP: - return omap_hsmmc_sleep_to_off(host); - default: - dev_dbg(mmc_dev(host->mmc), "UNKNOWN state\n"); - return -EINVAL; - } -} - static int omap_hsmmc_enable_fclk(struct mmc_host *mmc) { struct omap_hsmmc_host *host = mmc_priv(mmc); - int err; - err = clk_enable(host->fclk); - if (err) - return err; - dev_dbg(mmc_dev(host->mmc), "mmc_fclk: enabled\n"); - omap_hsmmc_context_restore(host); + pm_runtime_get_sync(host->dev); + return 0; } -static int omap_hsmmc_disable_fclk(struct mmc_host *mmc, int lazy) +static int omap_hsmmc_disable_fclk(struct mmc_host *mmc) { struct omap_hsmmc_host *host = mmc_priv(mmc); - omap_hsmmc_context_save(host); - clk_disable(host->fclk); - dev_dbg(mmc_dev(host->mmc), "mmc_fclk: disabled\n"); + pm_runtime_mark_last_busy(host->dev); + pm_runtime_put_autosuspend(host->dev); + return 0; } static const struct mmc_host_ops omap_hsmmc_ops = { .enable = omap_hsmmc_enable_fclk, .disable = omap_hsmmc_disable_fclk, - .request = omap_hsmmc_request, - .set_ios = omap_hsmmc_set_ios, - .get_cd = omap_hsmmc_get_cd, - .get_ro = omap_hsmmc_get_ro, - .init_card = omap_hsmmc_init_card, - /* NYET -- enable_sdio_irq */ -}; - -static const struct mmc_host_ops omap_hsmmc_ps_ops = { - .enable = omap_hsmmc_enable, - .disable = omap_hsmmc_disable, + .post_req = omap_hsmmc_post_req, + .pre_req = omap_hsmmc_pre_req, .request = omap_hsmmc_request, .set_ios = omap_hsmmc_set_ios, .get_cd = omap_hsmmc_get_cd, @@ -1934,33 +1700,12 @@ static int omap_hsmmc_regs_show(struct seq_file *s, void *data) { struct mmc_host *mmc = s->private; struct omap_hsmmc_host *host = mmc_priv(mmc); - int context_loss = 0; - - if (host->pdata->get_context_loss_count) - context_loss = host->pdata->get_context_loss_count(host->dev); - - seq_printf(s, "mmc%d:\n" - " enabled:\t%d\n" - " dpm_state:\t%d\n" - " nesting_cnt:\t%d\n" - " ctx_loss:\t%d:%d\n" - "\nregs:\n", - mmc->index, mmc->enabled ? 1 : 0, - host->dpm_state, mmc->nesting_cnt, - host->context_loss, context_loss); - - if (host->suspended || host->dpm_state == OFF) { - seq_printf(s, "host suspended, can't read registers\n"); - return 0; - } - if (clk_enable(host->fclk) != 0) { - seq_printf(s, "can't read the regs\n"); - return 0; - } + seq_printf(s, "mmc%d:\n ctx_loss:\t%d\n\nregs:\n", + mmc->index, host->context_loss); + + pm_runtime_get_sync(host->dev); - seq_printf(s, "SYSCONFIG:\t0x%08x\n", - OMAP_HSMMC_READ(host->base, SYSCONFIG)); seq_printf(s, "CON:\t\t0x%08x\n", OMAP_HSMMC_READ(host->base, CON)); seq_printf(s, "HCTL:\t\t0x%08x\n", @@ -1974,7 +1719,8 @@ static int omap_hsmmc_regs_show(struct seq_file *s, void *data) seq_printf(s, "CAPA:\t\t0x%08x\n", OMAP_HSMMC_READ(host->base, CAPA)); - clk_disable(host->fclk); + pm_runtime_mark_last_busy(host->dev); + pm_runtime_put_autosuspend(host->dev); return 0; } @@ -2006,13 +1752,121 @@ static void omap_hsmmc_debugfs(struct mmc_host *mmc) #endif -static int __init omap_hsmmc_probe(struct platform_device *pdev) +#ifdef CONFIG_OF +static const struct omap_mmc_of_data omap3_pre_es3_mmc_of_data = { + /* See 35xx errata 2.1.1.128 in SPRZ278F */ + .controller_flags = OMAP_HSMMC_BROKEN_MULTIBLOCK_READ, +}; + +static const struct omap_mmc_of_data omap4_mmc_of_data = { + .reg_offset = 0x100, +}; + +static const struct of_device_id omap_mmc_of_match[] = { + { + .compatible = "ti,omap2-hsmmc", + }, + { + .compatible = "ti,omap3-pre-es3-hsmmc", + .data = &omap3_pre_es3_mmc_of_data, + }, + { + .compatible = "ti,omap3-hsmmc", + }, + { + .compatible = "ti,omap4-hsmmc", + .data = &omap4_mmc_of_data, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, omap_mmc_of_match); + +static struct omap_mmc_platform_data *of_get_hsmmc_pdata(struct device *dev) +{ + struct omap_mmc_platform_data *pdata; + struct device_node *np = dev->of_node; + u32 bus_width, max_freq; + int cd_gpio, wp_gpio; + + cd_gpio = of_get_named_gpio(np, "cd-gpios", 0); + wp_gpio = of_get_named_gpio(np, "wp-gpios", 0); + if (cd_gpio == -EPROBE_DEFER || wp_gpio == -EPROBE_DEFER) + return ERR_PTR(-EPROBE_DEFER); + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return ERR_PTR(-ENOMEM); /* out of memory */ + + if (of_find_property(np, "ti,dual-volt", NULL)) + pdata->controller_flags |= OMAP_HSMMC_SUPPORTS_DUAL_VOLT; + + /* This driver only supports 1 slot */ + pdata->nr_slots = 1; + pdata->slots[0].switch_pin = cd_gpio; + pdata->slots[0].gpio_wp = wp_gpio; + + if (of_find_property(np, "ti,non-removable", NULL)) { + pdata->slots[0].nonremovable = true; + pdata->slots[0].no_regulator_off_init = true; + } + of_property_read_u32(np, "bus-width", &bus_width); + if (bus_width == 4) + pdata->slots[0].caps |= MMC_CAP_4_BIT_DATA; + else if (bus_width == 8) + pdata->slots[0].caps |= MMC_CAP_8_BIT_DATA; + + if (of_find_property(np, "ti,needs-special-reset", NULL)) + pdata->slots[0].features |= HSMMC_HAS_UPDATED_RESET; + + if (!of_property_read_u32(np, "max-frequency", &max_freq)) + pdata->max_freq = max_freq; + + if (of_find_property(np, "ti,needs-special-hs-handling", NULL)) + pdata->slots[0].features |= HSMMC_HAS_HSPE_SUPPORT; + + if (of_find_property(np, "keep-power-in-suspend", NULL)) + pdata->slots[0].pm_caps |= MMC_PM_KEEP_POWER; + + if (of_find_property(np, "enable-sdio-wakeup", NULL)) + pdata->slots[0].pm_caps |= MMC_PM_WAKE_SDIO_IRQ; + + return pdata; +} +#else +static inline struct omap_mmc_platform_data + *of_get_hsmmc_pdata(struct device *dev) +{ + return ERR_PTR(-EINVAL); +} +#endif + +static int omap_hsmmc_probe(struct platform_device *pdev) { struct omap_mmc_platform_data *pdata = pdev->dev.platform_data; struct mmc_host *mmc; struct omap_hsmmc_host *host = NULL; struct resource *res; int ret, irq; + const struct of_device_id *match; + dma_cap_mask_t mask; + unsigned tx_req, rx_req; + struct pinctrl *pinctrl; + const struct omap_mmc_of_data *data; + void __iomem *base; + + match = of_match_device(of_match_ptr(omap_mmc_of_match), &pdev->dev); + if (match) { + pdata = of_get_hsmmc_pdata(&pdev->dev); + + if (IS_ERR(pdata)) + return PTR_ERR(pdata); + + if (match->data) { + data = match->data; + pdata->reg_offset = data->reg_offset; + pdata->controller_flags |= data->controller_flags; + } + } if (pdata == NULL) { dev_err(&pdev->dev, "Platform Data is missing\n"); @@ -2029,12 +1883,9 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev) if (res == NULL || irq < 0) return -ENXIO; - res->start += pdata->reg_offset; - res->end += pdata->reg_offset; - res = request_mem_region(res->start, res->end - res->start + 1, - pdev->name); - if (res == NULL) - return -EBUSY; + base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); ret = omap_hsmmc_gpio_init(pdata); if (ret) @@ -2051,84 +1902,56 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev) host->pdata = pdata; host->dev = &pdev->dev; host->use_dma = 1; - host->dev->dma_mask = &pdata->dma_mask; host->dma_ch = -1; host->irq = irq; - host->id = pdev->id; host->slot_id = 0; - host->mapbase = res->start; - host->base = ioremap(host->mapbase, SZ_4K); + host->mapbase = res->start + pdata->reg_offset; + host->base = base + pdata->reg_offset; host->power_mode = MMC_POWER_OFF; + host->next_data.cookie = 1; + host->pbias_enabled = 0; platform_set_drvdata(pdev, host); - INIT_WORK(&host->mmc_carddetect_work, omap_hsmmc_detect); - if (mmc_slot(host).power_saving) - mmc->ops = &omap_hsmmc_ps_ops; - else - mmc->ops = &omap_hsmmc_ops; + mmc->ops = &omap_hsmmc_ops; - /* - * If regulator_disable can only put vcc_aux to sleep then there is - * no off state. - */ - if (mmc_slot(host).vcc_aux_disable_is_sleep) - mmc_slot(host).no_off = 1; + mmc->f_min = OMAP_MMC_MIN_CLOCK; - mmc->f_min = 400000; - mmc->f_max = 52000000; + if (pdata->max_freq > 0) + mmc->f_max = pdata->max_freq; + else + mmc->f_max = OMAP_MMC_MAX_CLOCK; spin_lock_init(&host->irq_lock); - host->iclk = clk_get(&pdev->dev, "ick"); - if (IS_ERR(host->iclk)) { - ret = PTR_ERR(host->iclk); - host->iclk = NULL; - goto err1; - } - host->fclk = clk_get(&pdev->dev, "fck"); + host->fclk = devm_clk_get(&pdev->dev, "fck"); if (IS_ERR(host->fclk)) { ret = PTR_ERR(host->fclk); host->fclk = NULL; - clk_put(host->iclk); goto err1; } - omap_hsmmc_context_save(host); - - mmc->caps |= MMC_CAP_DISABLE; - mmc_set_disable_delay(mmc, OMAP_MMC_DISABLED_TIMEOUT); - /* we start off in DISABLED state */ - host->dpm_state = DISABLED; - - if (mmc_host_enable(host->mmc) != 0) { - clk_put(host->iclk); - clk_put(host->fclk); - goto err1; + if (host->pdata->controller_flags & OMAP_HSMMC_BROKEN_MULTIBLOCK_READ) { + dev_info(&pdev->dev, "multiblock reads disabled due to 35xx erratum 2.1.1.128; MMC read performance may suffer\n"); + mmc->caps2 |= MMC_CAP2_NO_MULTI_READ; } - if (clk_enable(host->iclk) != 0) { - mmc_host_disable(host->mmc); - clk_put(host->iclk); - clk_put(host->fclk); - goto err1; - } + pm_runtime_enable(host->dev); + pm_runtime_get_sync(host->dev); + pm_runtime_set_autosuspend_delay(host->dev, MMC_AUTOSUSPEND_DELAY); + pm_runtime_use_autosuspend(host->dev); - if (cpu_is_omap2430()) { - host->dbclk = clk_get(&pdev->dev, "mmchsdb_fck"); - /* - * MMC can still work without debounce clock. - */ - if (IS_ERR(host->dbclk)) - dev_warn(mmc_dev(host->mmc), - "Failed to get debounce clock\n"); - else - host->got_dbclk = 1; + omap_hsmmc_context_save(host); - if (host->got_dbclk) - if (clk_enable(host->dbclk) != 0) - dev_dbg(mmc_dev(host->mmc), "Enabling debounce" - " clk failed\n"); + host->dbclk = devm_clk_get(&pdev->dev, "mmchsdb_fck"); + /* + * MMC can still work without debounce clock. + */ + if (IS_ERR(host->dbclk)) { + host->dbclk = NULL; + } else if (clk_prepare_enable(host->dbclk) != 0) { + dev_warn(mmc_dev(host->mmc), "Failed to enable debounce clk\n"); + host->dbclk = NULL; } /* Since we do only SG emulation, we can have as many segs @@ -2150,48 +1973,64 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev) if (mmc_slot(host).nonremovable) mmc->caps |= MMC_CAP_NONREMOVABLE; + mmc->pm_caps = mmc_slot(host).pm_caps; + omap_hsmmc_conf_bus_power(host); - /* Select DMA lines */ - switch (host->id) { - case OMAP_MMC1_DEVID: - host->dma_line_tx = OMAP24XX_DMA_MMC1_TX; - host->dma_line_rx = OMAP24XX_DMA_MMC1_RX; - break; - case OMAP_MMC2_DEVID: - host->dma_line_tx = OMAP24XX_DMA_MMC2_TX; - host->dma_line_rx = OMAP24XX_DMA_MMC2_RX; - break; - case OMAP_MMC3_DEVID: - host->dma_line_tx = OMAP34XX_DMA_MMC3_TX; - host->dma_line_rx = OMAP34XX_DMA_MMC3_RX; - break; - case OMAP_MMC4_DEVID: - host->dma_line_tx = OMAP44XX_DMA_MMC4_TX; - host->dma_line_rx = OMAP44XX_DMA_MMC4_RX; - break; - case OMAP_MMC5_DEVID: - host->dma_line_tx = OMAP44XX_DMA_MMC5_TX; - host->dma_line_rx = OMAP44XX_DMA_MMC5_RX; - break; - default: - dev_err(mmc_dev(host->mmc), "Invalid MMC id\n"); + if (!pdev->dev.of_node) { + res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx"); + if (!res) { + dev_err(mmc_dev(host->mmc), "cannot get DMA TX channel\n"); + ret = -ENXIO; + goto err_irq; + } + tx_req = res->start; + + res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx"); + if (!res) { + dev_err(mmc_dev(host->mmc), "cannot get DMA RX channel\n"); + ret = -ENXIO; + goto err_irq; + } + rx_req = res->start; + } + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + host->rx_chan = + dma_request_slave_channel_compat(mask, omap_dma_filter_fn, + &rx_req, &pdev->dev, "rx"); + + if (!host->rx_chan) { + dev_err(mmc_dev(host->mmc), "unable to obtain RX DMA engine channel %u\n", rx_req); + ret = -ENXIO; + goto err_irq; + } + + host->tx_chan = + dma_request_slave_channel_compat(mask, omap_dma_filter_fn, + &tx_req, &pdev->dev, "tx"); + + if (!host->tx_chan) { + dev_err(mmc_dev(host->mmc), "unable to obtain TX DMA engine channel %u\n", tx_req); + ret = -ENXIO; goto err_irq; } /* Request IRQ for MMC operations */ - ret = request_irq(host->irq, omap_hsmmc_irq, IRQF_DISABLED, + ret = devm_request_irq(&pdev->dev, host->irq, omap_hsmmc_irq, 0, mmc_hostname(mmc), host); if (ret) { - dev_dbg(mmc_dev(host->mmc), "Unable to grab HSMMC IRQ\n"); + dev_err(mmc_dev(host->mmc), "Unable to grab HSMMC IRQ\n"); goto err_irq; } if (pdata->init != NULL) { if (pdata->init(&pdev->dev) != 0) { - dev_dbg(mmc_dev(host->mmc), + dev_err(mmc_dev(host->mmc), "Unable to configure MMC IRQs\n"); - goto err_irq_cd_init; + goto err_irq; } } @@ -2206,13 +2045,13 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev) /* Request IRQ for card detect */ if ((mmc_slot(host).card_detect_irq)) { - ret = request_irq(mmc_slot(host).card_detect_irq, - omap_hsmmc_cd_handler, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING - | IRQF_DISABLED, - mmc_hostname(mmc), host); + ret = devm_request_threaded_irq(&pdev->dev, + mmc_slot(host).card_detect_irq, + NULL, omap_hsmmc_detect, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + mmc_hostname(mmc), host); if (ret) { - dev_dbg(mmc_dev(host->mmc), + dev_err(mmc_dev(host->mmc), "Unable to grab MMC CD IRQ\n"); goto err_irq_cd; } @@ -2222,7 +2061,10 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev) omap_hsmmc_disable_irq(host); - mmc_host_lazy_disable(host->mmc); + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) + dev_warn(&pdev->dev, + "pins are not configured from the driver\n"); omap_hsmmc_protect_card(host); @@ -2241,213 +2083,178 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev) } omap_hsmmc_debugfs(mmc); + pm_runtime_mark_last_busy(host->dev); + pm_runtime_put_autosuspend(host->dev); return 0; err_slot_name: mmc_remove_host(mmc); - free_irq(mmc_slot(host).card_detect_irq, host); err_irq_cd: if (host->use_reg) omap_hsmmc_reg_put(host); err_reg: if (host->pdata->cleanup) host->pdata->cleanup(&pdev->dev); -err_irq_cd_init: - free_irq(host->irq, host); err_irq: - mmc_host_disable(host->mmc); - clk_disable(host->iclk); - clk_put(host->fclk); - clk_put(host->iclk); - if (host->got_dbclk) { - clk_disable(host->dbclk); - clk_put(host->dbclk); - } + if (host->tx_chan) + dma_release_channel(host->tx_chan); + if (host->rx_chan) + dma_release_channel(host->rx_chan); + pm_runtime_put_sync(host->dev); + pm_runtime_disable(host->dev); + if (host->dbclk) + clk_disable_unprepare(host->dbclk); err1: - iounmap(host->base); - platform_set_drvdata(pdev, NULL); mmc_free_host(mmc); err_alloc: omap_hsmmc_gpio_free(pdata); err: - release_mem_region(res->start, res->end - res->start + 1); return ret; } static int omap_hsmmc_remove(struct platform_device *pdev) { struct omap_hsmmc_host *host = platform_get_drvdata(pdev); - struct resource *res; - if (host) { - mmc_host_enable(host->mmc); - mmc_remove_host(host->mmc); - if (host->use_reg) - omap_hsmmc_reg_put(host); - if (host->pdata->cleanup) - host->pdata->cleanup(&pdev->dev); - free_irq(host->irq, host); - if (mmc_slot(host).card_detect_irq) - free_irq(mmc_slot(host).card_detect_irq, host); - flush_scheduled_work(); - - mmc_host_disable(host->mmc); - clk_disable(host->iclk); - clk_put(host->fclk); - clk_put(host->iclk); - if (host->got_dbclk) { - clk_disable(host->dbclk); - clk_put(host->dbclk); - } + pm_runtime_get_sync(host->dev); + mmc_remove_host(host->mmc); + if (host->use_reg) + omap_hsmmc_reg_put(host); + if (host->pdata->cleanup) + host->pdata->cleanup(&pdev->dev); - mmc_free_host(host->mmc); - iounmap(host->base); - omap_hsmmc_gpio_free(pdev->dev.platform_data); - } + if (host->tx_chan) + dma_release_channel(host->tx_chan); + if (host->rx_chan) + dma_release_channel(host->rx_chan); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res) - release_mem_region(res->start, res->end - res->start + 1); - platform_set_drvdata(pdev, NULL); + pm_runtime_put_sync(host->dev); + pm_runtime_disable(host->dev); + if (host->dbclk) + clk_disable_unprepare(host->dbclk); + + omap_hsmmc_gpio_free(host->pdata); + mmc_free_host(host->mmc); return 0; } #ifdef CONFIG_PM +static int omap_hsmmc_prepare(struct device *dev) +{ + struct omap_hsmmc_host *host = dev_get_drvdata(dev); + + if (host->pdata->suspend) + return host->pdata->suspend(dev, host->slot_id); + + return 0; +} + +static void omap_hsmmc_complete(struct device *dev) +{ + struct omap_hsmmc_host *host = dev_get_drvdata(dev); + + if (host->pdata->resume) + host->pdata->resume(dev, host->slot_id); + +} + static int omap_hsmmc_suspend(struct device *dev) { - int ret = 0; - struct platform_device *pdev = to_platform_device(dev); - struct omap_hsmmc_host *host = platform_get_drvdata(pdev); + struct omap_hsmmc_host *host = dev_get_drvdata(dev); - if (host && host->suspended) + if (!host) return 0; - if (host) { - host->suspended = 1; - if (host->pdata->suspend) { - ret = host->pdata->suspend(&pdev->dev, - host->slot_id); - if (ret) { - dev_dbg(mmc_dev(host->mmc), - "Unable to handle MMC board" - " level suspend\n"); - host->suspended = 0; - return ret; - } - } - cancel_work_sync(&host->mmc_carddetect_work); - ret = mmc_suspend_host(host->mmc); - mmc_host_enable(host->mmc); - if (ret == 0) { - omap_hsmmc_disable_irq(host); - OMAP_HSMMC_WRITE(host->base, HCTL, - OMAP_HSMMC_READ(host->base, HCTL) & ~SDBP); - mmc_host_disable(host->mmc); - clk_disable(host->iclk); - if (host->got_dbclk) - clk_disable(host->dbclk); - } else { - host->suspended = 0; - if (host->pdata->resume) { - ret = host->pdata->resume(&pdev->dev, - host->slot_id); - if (ret) - dev_dbg(mmc_dev(host->mmc), - "Unmask interrupt failed\n"); - } - mmc_host_disable(host->mmc); - } + pm_runtime_get_sync(host->dev); + if (!(host->mmc->pm_flags & MMC_PM_KEEP_POWER)) { + omap_hsmmc_disable_irq(host); + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) & ~SDBP); } - return ret; + + if (host->dbclk) + clk_disable_unprepare(host->dbclk); + + pm_runtime_put_sync(host->dev); + return 0; } /* Routine to resume the MMC device */ static int omap_hsmmc_resume(struct device *dev) { - int ret = 0; - struct platform_device *pdev = to_platform_device(dev); - struct omap_hsmmc_host *host = platform_get_drvdata(pdev); + struct omap_hsmmc_host *host = dev_get_drvdata(dev); - if (host && !host->suspended) + if (!host) return 0; - if (host) { - ret = clk_enable(host->iclk); - if (ret) - goto clk_en_err; - - if (mmc_host_enable(host->mmc) != 0) { - clk_disable(host->iclk); - goto clk_en_err; - } + pm_runtime_get_sync(host->dev); - if (host->got_dbclk) - clk_enable(host->dbclk); + if (host->dbclk) + clk_prepare_enable(host->dbclk); + if (!(host->mmc->pm_flags & MMC_PM_KEEP_POWER)) omap_hsmmc_conf_bus_power(host); - if (host->pdata->resume) { - ret = host->pdata->resume(&pdev->dev, host->slot_id); - if (ret) - dev_dbg(mmc_dev(host->mmc), - "Unmask interrupt failed\n"); - } + omap_hsmmc_protect_card(host); - omap_hsmmc_protect_card(host); + pm_runtime_mark_last_busy(host->dev); + pm_runtime_put_autosuspend(host->dev); + return 0; +} - /* Notify the core to resume the host */ - ret = mmc_resume_host(host->mmc); - if (ret == 0) - host->suspended = 0; +#else +#define omap_hsmmc_prepare NULL +#define omap_hsmmc_complete NULL +#define omap_hsmmc_suspend NULL +#define omap_hsmmc_resume NULL +#endif - mmc_host_lazy_disable(host->mmc); - } +static int omap_hsmmc_runtime_suspend(struct device *dev) +{ + struct omap_hsmmc_host *host; - return ret; + host = platform_get_drvdata(to_platform_device(dev)); + omap_hsmmc_context_save(host); + dev_dbg(dev, "disabled\n"); -clk_en_err: - dev_dbg(mmc_dev(host->mmc), - "Failed to enable MMC clocks during resume\n"); - return ret; + return 0; } -#else -#define omap_hsmmc_suspend NULL -#define omap_hsmmc_resume NULL -#endif +static int omap_hsmmc_runtime_resume(struct device *dev) +{ + struct omap_hsmmc_host *host; + + host = platform_get_drvdata(to_platform_device(dev)); + omap_hsmmc_context_restore(host); + dev_dbg(dev, "enabled\n"); + + return 0; +} static struct dev_pm_ops omap_hsmmc_dev_pm_ops = { .suspend = omap_hsmmc_suspend, .resume = omap_hsmmc_resume, + .prepare = omap_hsmmc_prepare, + .complete = omap_hsmmc_complete, + .runtime_suspend = omap_hsmmc_runtime_suspend, + .runtime_resume = omap_hsmmc_runtime_resume, }; static struct platform_driver omap_hsmmc_driver = { + .probe = omap_hsmmc_probe, .remove = omap_hsmmc_remove, .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, .pm = &omap_hsmmc_dev_pm_ops, + .of_match_table = of_match_ptr(omap_mmc_of_match), }, }; -static int __init omap_hsmmc_init(void) -{ - /* Register the MMC driver */ - return platform_driver_probe(&omap_hsmmc_driver, omap_hsmmc_probe); -} - -static void __exit omap_hsmmc_cleanup(void) -{ - /* Unregister MMC driver */ - platform_driver_unregister(&omap_hsmmc_driver); -} - -module_init(omap_hsmmc_init); -module_exit(omap_hsmmc_cleanup); - +module_platform_driver(omap_hsmmc_driver); MODULE_DESCRIPTION("OMAP High Speed Multimedia Card driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index 7257738fd7d..32fe11323f3 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -30,12 +30,15 @@ #include <linux/regulator/consumer.h> #include <linux/gpio.h> #include <linux/gfp.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/of_device.h> #include <asm/sizes.h> #include <mach/hardware.h> #include <mach/dma.h> -#include <mach/mmc.h> +#include <linux/platform_data/mmc-pxamci.h> #include "pxamci.h" @@ -80,7 +83,7 @@ struct pxamci_host { static inline void pxamci_init_ocr(struct pxamci_host *host) { #ifdef CONFIG_REGULATOR - host->vcc = regulator_get(mmc_dev(host->mmc), "vmmc"); + host->vcc = regulator_get_optional(mmc_dev(host->mmc), "vmmc"); if (IS_ERR(host->vcc)) host->vcc = NULL; @@ -125,7 +128,7 @@ static inline int pxamci_set_power(struct pxamci_host *host, !!on ^ host->pdata->gpio_power_invert); } if (!host->vcc && host->pdata && host->pdata->setpower) - host->pdata->setpower(mmc_dev(host->mmc), vdd); + return host->pdata->setpower(mmc_dev(host->mmc), vdd); return 0; } @@ -558,7 +561,7 @@ static void pxamci_dma_irq(int dma, void *devid) if (dcsr & DCSR_ENDINTR) { writel(BUF_PART_FULL, host->base + MMC_PRTBUF); } else { - printk(KERN_ERR "%s: DMA error on channel %d (DCSR=%#x)\n", + pr_err("%s: DMA error on channel %d (DCSR=%#x)\n", mmc_hostname(host->mmc), dma, dcsr); host->data->error = -EIO; pxamci_data_done(host, 0); @@ -573,6 +576,50 @@ static irqreturn_t pxamci_detect_irq(int irq, void *devid) return IRQ_HANDLED; } +#ifdef CONFIG_OF +static const struct of_device_id pxa_mmc_dt_ids[] = { + { .compatible = "marvell,pxa-mmc" }, + { } +}; + +MODULE_DEVICE_TABLE(of, pxa_mmc_dt_ids); + +static int pxamci_of_init(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct pxamci_platform_data *pdata; + u32 tmp; + + if (!np) + return 0; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + pdata->gpio_card_detect = + of_get_named_gpio(np, "cd-gpios", 0); + pdata->gpio_card_ro = + of_get_named_gpio(np, "wp-gpios", 0); + + /* pxa-mmc specific */ + pdata->gpio_power = + of_get_named_gpio(np, "pxa-mmc,gpio-power", 0); + + if (of_property_read_u32(np, "pxa-mmc,detect-delay-ms", &tmp) == 0) + pdata->detect_delay_ms = tmp; + + pdev->dev.platform_data = pdata; + + return 0; +} +#else +static int pxamci_of_init(struct platform_device *pdev) +{ + return 0; +} +#endif + static int pxamci_probe(struct platform_device *pdev) { struct mmc_host *mmc; @@ -580,6 +627,10 @@ static int pxamci_probe(struct platform_device *pdev) struct resource *r, *dmarx, *dmatx; int ret, irq, gpio_cd = -1, gpio_ro = -1, gpio_power = -1; + ret = pxamci_of_init(pdev); + if (ret) + return ret; + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_irq(pdev, 0); if (!r || irq < 0) @@ -783,8 +834,6 @@ static int pxamci_remove(struct platform_device *pdev) struct mmc_host *mmc = platform_get_drvdata(pdev); int gpio_cd = -1, gpio_ro = -1, gpio_power = -1; - platform_set_drvdata(pdev, NULL); - if (mmc) { struct pxamci_host *host = mmc_priv(mmc); @@ -831,59 +880,17 @@ static int pxamci_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM -static int pxamci_suspend(struct device *dev) -{ - struct mmc_host *mmc = dev_get_drvdata(dev); - int ret = 0; - - if (mmc) - ret = mmc_suspend_host(mmc); - - return ret; -} - -static int pxamci_resume(struct device *dev) -{ - struct mmc_host *mmc = dev_get_drvdata(dev); - int ret = 0; - - if (mmc) - ret = mmc_resume_host(mmc); - - return ret; -} - -static const struct dev_pm_ops pxamci_pm_ops = { - .suspend = pxamci_suspend, - .resume = pxamci_resume, -}; -#endif - static struct platform_driver pxamci_driver = { .probe = pxamci_probe, .remove = pxamci_remove, .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, -#ifdef CONFIG_PM - .pm = &pxamci_pm_ops, -#endif + .of_match_table = of_match_ptr(pxa_mmc_dt_ids), }, }; -static int __init pxamci_init(void) -{ - return platform_driver_register(&pxamci_driver); -} - -static void __exit pxamci_exit(void) -{ - platform_driver_unregister(&pxamci_driver); -} - -module_init(pxamci_init); -module_exit(pxamci_exit); +module_platform_driver(pxamci_driver); MODULE_DESCRIPTION("PXA Multimedia Card Interface Driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c new file mode 100644 index 00000000000..0d519649b57 --- /dev/null +++ b/drivers/mmc/host/rtsx_pci_sdmmc.c @@ -0,0 +1,1306 @@ +/* Realtek PCI-Express SD/MMC Card Interface driver + * + * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + * Author: + * Wei WANG <wei_wang@realsil.com.cn> + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/highmem.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/mmc/host.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/sd.h> +#include <linux/mmc/card.h> +#include <linux/mfd/rtsx_pci.h> +#include <asm/unaligned.h> + +struct realtek_pci_sdmmc { + struct platform_device *pdev; + struct rtsx_pcr *pcr; + struct mmc_host *mmc; + struct mmc_request *mrq; + + struct mutex host_mutex; + + u8 ssc_depth; + unsigned int clock; + bool vpclk; + bool double_clk; + bool eject; + bool initial_mode; + int power_state; +#define SDMMC_POWER_ON 1 +#define SDMMC_POWER_OFF 0 +}; + +static inline struct device *sdmmc_dev(struct realtek_pci_sdmmc *host) +{ + return &(host->pdev->dev); +} + +static inline void sd_clear_error(struct realtek_pci_sdmmc *host) +{ + rtsx_pci_write_register(host->pcr, CARD_STOP, + SD_STOP | SD_CLR_ERR, SD_STOP | SD_CLR_ERR); +} + +#ifdef DEBUG +static void sd_print_debug_regs(struct realtek_pci_sdmmc *host) +{ + struct rtsx_pcr *pcr = host->pcr; + u16 i; + u8 *ptr; + + /* Print SD host internal registers */ + rtsx_pci_init_cmd(pcr); + for (i = 0xFDA0; i <= 0xFDAE; i++) + rtsx_pci_add_cmd(pcr, READ_REG_CMD, i, 0, 0); + for (i = 0xFD52; i <= 0xFD69; i++) + rtsx_pci_add_cmd(pcr, READ_REG_CMD, i, 0, 0); + rtsx_pci_send_cmd(pcr, 100); + + ptr = rtsx_pci_get_cmd_data(pcr); + for (i = 0xFDA0; i <= 0xFDAE; i++) + dev_dbg(sdmmc_dev(host), "0x%04X: 0x%02x\n", i, *(ptr++)); + for (i = 0xFD52; i <= 0xFD69; i++) + dev_dbg(sdmmc_dev(host), "0x%04X: 0x%02x\n", i, *(ptr++)); +} +#else +#define sd_print_debug_regs(host) +#endif /* DEBUG */ + +static int sd_read_data(struct realtek_pci_sdmmc *host, u8 *cmd, u16 byte_cnt, + u8 *buf, int buf_len, int timeout) +{ + struct rtsx_pcr *pcr = host->pcr; + int err, i; + u8 trans_mode; + + dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD%d\n", __func__, cmd[0] - 0x40); + + if (!buf) + buf_len = 0; + + if ((cmd[0] & 0x3F) == MMC_SEND_TUNING_BLOCK) + trans_mode = SD_TM_AUTO_TUNING; + else + trans_mode = SD_TM_NORMAL_READ; + + rtsx_pci_init_cmd(pcr); + + for (i = 0; i < 5; i++) + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD0 + i, 0xFF, cmd[i]); + + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BYTE_CNT_L, 0xFF, (u8)byte_cnt); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BYTE_CNT_H, + 0xFF, (u8)(byte_cnt >> 8)); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BLOCK_CNT_L, 0xFF, 1); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BLOCK_CNT_H, 0xFF, 0); + + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG2, 0xFF, + SD_CALCULATE_CRC7 | SD_CHECK_CRC16 | + SD_NO_WAIT_BUSY_END | SD_CHECK_CRC7 | SD_RSP_LEN_6); + if (trans_mode != SD_TM_AUTO_TUNING) + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, + CARD_DATA_SOURCE, 0x01, PINGPONG_BUFFER); + + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_TRANSFER, + 0xFF, trans_mode | SD_TRANSFER_START); + rtsx_pci_add_cmd(pcr, CHECK_REG_CMD, SD_TRANSFER, + SD_TRANSFER_END, SD_TRANSFER_END); + + err = rtsx_pci_send_cmd(pcr, timeout); + if (err < 0) { + sd_print_debug_regs(host); + dev_dbg(sdmmc_dev(host), + "rtsx_pci_send_cmd fail (err = %d)\n", err); + return err; + } + + if (buf && buf_len) { + err = rtsx_pci_read_ppbuf(pcr, buf, buf_len); + if (err < 0) { + dev_dbg(sdmmc_dev(host), + "rtsx_pci_read_ppbuf fail (err = %d)\n", err); + return err; + } + } + + return 0; +} + +static int sd_write_data(struct realtek_pci_sdmmc *host, u8 *cmd, u16 byte_cnt, + u8 *buf, int buf_len, int timeout) +{ + struct rtsx_pcr *pcr = host->pcr; + int err, i; + u8 trans_mode; + + if (!buf) + buf_len = 0; + + if (buf && buf_len) { + err = rtsx_pci_write_ppbuf(pcr, buf, buf_len); + if (err < 0) { + dev_dbg(sdmmc_dev(host), + "rtsx_pci_write_ppbuf fail (err = %d)\n", err); + return err; + } + } + + trans_mode = cmd ? SD_TM_AUTO_WRITE_2 : SD_TM_AUTO_WRITE_3; + rtsx_pci_init_cmd(pcr); + + if (cmd) { + dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD %d\n", __func__, + cmd[0] - 0x40); + + for (i = 0; i < 5; i++) + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, + SD_CMD0 + i, 0xFF, cmd[i]); + } + + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BYTE_CNT_L, 0xFF, (u8)byte_cnt); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BYTE_CNT_H, + 0xFF, (u8)(byte_cnt >> 8)); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BLOCK_CNT_L, 0xFF, 1); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BLOCK_CNT_H, 0xFF, 0); + + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG2, 0xFF, + SD_CALCULATE_CRC7 | SD_CHECK_CRC16 | + SD_NO_WAIT_BUSY_END | SD_CHECK_CRC7 | SD_RSP_LEN_6); + + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_TRANSFER, 0xFF, + trans_mode | SD_TRANSFER_START); + rtsx_pci_add_cmd(pcr, CHECK_REG_CMD, SD_TRANSFER, + SD_TRANSFER_END, SD_TRANSFER_END); + + err = rtsx_pci_send_cmd(pcr, timeout); + if (err < 0) { + sd_print_debug_regs(host); + dev_dbg(sdmmc_dev(host), + "rtsx_pci_send_cmd fail (err = %d)\n", err); + return err; + } + + return 0; +} + +static void sd_send_cmd_get_rsp(struct realtek_pci_sdmmc *host, + struct mmc_command *cmd) +{ + struct rtsx_pcr *pcr = host->pcr; + u8 cmd_idx = (u8)cmd->opcode; + u32 arg = cmd->arg; + int err = 0; + int timeout = 100; + int i; + u8 *ptr; + int stat_idx = 0; + u8 rsp_type; + int rsp_len = 5; + bool clock_toggled = false; + + dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD %d, arg = 0x%08x\n", + __func__, cmd_idx, arg); + + /* Response type: + * R0 + * R1, R5, R6, R7 + * R1b + * R2 + * R3, R4 + */ + switch (mmc_resp_type(cmd)) { + case MMC_RSP_NONE: + rsp_type = SD_RSP_TYPE_R0; + rsp_len = 0; + break; + case MMC_RSP_R1: + rsp_type = SD_RSP_TYPE_R1; + break; + case MMC_RSP_R1 & ~MMC_RSP_CRC: + rsp_type = SD_RSP_TYPE_R1 | SD_NO_CHECK_CRC7; + break; + case MMC_RSP_R1B: + rsp_type = SD_RSP_TYPE_R1b; + break; + case MMC_RSP_R2: + rsp_type = SD_RSP_TYPE_R2; + rsp_len = 16; + break; + case MMC_RSP_R3: + rsp_type = SD_RSP_TYPE_R3; + break; + default: + dev_dbg(sdmmc_dev(host), "cmd->flag is not valid\n"); + err = -EINVAL; + goto out; + } + + if (rsp_type == SD_RSP_TYPE_R1b) + timeout = 3000; + + if (cmd->opcode == SD_SWITCH_VOLTAGE) { + err = rtsx_pci_write_register(pcr, SD_BUS_STAT, + 0xFF, SD_CLK_TOGGLE_EN); + if (err < 0) + goto out; + + clock_toggled = true; + } + + rtsx_pci_init_cmd(pcr); + + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD0, 0xFF, 0x40 | cmd_idx); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD1, 0xFF, (u8)(arg >> 24)); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD2, 0xFF, (u8)(arg >> 16)); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD3, 0xFF, (u8)(arg >> 8)); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD4, 0xFF, (u8)arg); + + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG2, 0xFF, rsp_type); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_DATA_SOURCE, + 0x01, PINGPONG_BUFFER); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_TRANSFER, + 0xFF, SD_TM_CMD_RSP | SD_TRANSFER_START); + rtsx_pci_add_cmd(pcr, CHECK_REG_CMD, SD_TRANSFER, + SD_TRANSFER_END | SD_STAT_IDLE, + SD_TRANSFER_END | SD_STAT_IDLE); + + if (rsp_type == SD_RSP_TYPE_R2) { + /* Read data from ping-pong buffer */ + for (i = PPBUF_BASE2; i < PPBUF_BASE2 + 16; i++) + rtsx_pci_add_cmd(pcr, READ_REG_CMD, (u16)i, 0, 0); + stat_idx = 16; + } else if (rsp_type != SD_RSP_TYPE_R0) { + /* Read data from SD_CMDx registers */ + for (i = SD_CMD0; i <= SD_CMD4; i++) + rtsx_pci_add_cmd(pcr, READ_REG_CMD, (u16)i, 0, 0); + stat_idx = 5; + } + + rtsx_pci_add_cmd(pcr, READ_REG_CMD, SD_STAT1, 0, 0); + + err = rtsx_pci_send_cmd(pcr, timeout); + if (err < 0) { + sd_print_debug_regs(host); + sd_clear_error(host); + dev_dbg(sdmmc_dev(host), + "rtsx_pci_send_cmd error (err = %d)\n", err); + goto out; + } + + if (rsp_type == SD_RSP_TYPE_R0) { + err = 0; + goto out; + } + + /* Eliminate returned value of CHECK_REG_CMD */ + ptr = rtsx_pci_get_cmd_data(pcr) + 1; + + /* Check (Start,Transmission) bit of Response */ + if ((ptr[0] & 0xC0) != 0) { + err = -EILSEQ; + dev_dbg(sdmmc_dev(host), "Invalid response bit\n"); + goto out; + } + + /* Check CRC7 */ + if (!(rsp_type & SD_NO_CHECK_CRC7)) { + if (ptr[stat_idx] & SD_CRC7_ERR) { + err = -EILSEQ; + dev_dbg(sdmmc_dev(host), "CRC7 error\n"); + goto out; + } + } + + if (rsp_type == SD_RSP_TYPE_R2) { + for (i = 0; i < 4; i++) { + cmd->resp[i] = get_unaligned_be32(ptr + 1 + i * 4); + dev_dbg(sdmmc_dev(host), "cmd->resp[%d] = 0x%08x\n", + i, cmd->resp[i]); + } + } else { + cmd->resp[0] = get_unaligned_be32(ptr + 1); + dev_dbg(sdmmc_dev(host), "cmd->resp[0] = 0x%08x\n", + cmd->resp[0]); + } + +out: + cmd->error = err; + + if (err && clock_toggled) + rtsx_pci_write_register(pcr, SD_BUS_STAT, + SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP, 0); +} + +static int sd_rw_multi(struct realtek_pci_sdmmc *host, struct mmc_request *mrq) +{ + struct rtsx_pcr *pcr = host->pcr; + struct mmc_host *mmc = host->mmc; + struct mmc_card *card = mmc->card; + struct mmc_data *data = mrq->data; + int uhs = mmc_card_uhs(card); + int read = (data->flags & MMC_DATA_READ) ? 1 : 0; + u8 cfg2, trans_mode; + int err; + size_t data_len = data->blksz * data->blocks; + + if (read) { + cfg2 = SD_CALCULATE_CRC7 | SD_CHECK_CRC16 | + SD_NO_WAIT_BUSY_END | SD_CHECK_CRC7 | SD_RSP_LEN_0; + trans_mode = SD_TM_AUTO_READ_3; + } else { + cfg2 = SD_NO_CALCULATE_CRC7 | SD_CHECK_CRC16 | + SD_NO_WAIT_BUSY_END | SD_NO_CHECK_CRC7 | SD_RSP_LEN_0; + trans_mode = SD_TM_AUTO_WRITE_3; + } + + if (!uhs) + cfg2 |= SD_NO_CHECK_WAIT_CRC_TO; + + rtsx_pci_init_cmd(pcr); + + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BYTE_CNT_L, 0xFF, 0x00); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BYTE_CNT_H, 0xFF, 0x02); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BLOCK_CNT_L, + 0xFF, (u8)data->blocks); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BLOCK_CNT_H, + 0xFF, (u8)(data->blocks >> 8)); + + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, IRQSTAT0, + DMA_DONE_INT, DMA_DONE_INT); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMATC3, + 0xFF, (u8)(data_len >> 24)); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMATC2, + 0xFF, (u8)(data_len >> 16)); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMATC1, + 0xFF, (u8)(data_len >> 8)); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMATC0, 0xFF, (u8)data_len); + if (read) { + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMACTL, + 0x03 | DMA_PACK_SIZE_MASK, + DMA_DIR_FROM_CARD | DMA_EN | DMA_512); + } else { + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMACTL, + 0x03 | DMA_PACK_SIZE_MASK, + DMA_DIR_TO_CARD | DMA_EN | DMA_512); + } + + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_DATA_SOURCE, + 0x01, RING_BUFFER); + + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG2, 0xFF, cfg2); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_TRANSFER, 0xFF, + trans_mode | SD_TRANSFER_START); + rtsx_pci_add_cmd(pcr, CHECK_REG_CMD, SD_TRANSFER, + SD_TRANSFER_END, SD_TRANSFER_END); + + rtsx_pci_send_cmd_no_wait(pcr); + + err = rtsx_pci_transfer_data(pcr, data->sg, data->sg_len, read, 10000); + if (err < 0) { + sd_clear_error(host); + return err; + } + + return 0; +} + +static inline void sd_enable_initial_mode(struct realtek_pci_sdmmc *host) +{ + rtsx_pci_write_register(host->pcr, SD_CFG1, + SD_CLK_DIVIDE_MASK, SD_CLK_DIVIDE_128); +} + +static inline void sd_disable_initial_mode(struct realtek_pci_sdmmc *host) +{ + rtsx_pci_write_register(host->pcr, SD_CFG1, + SD_CLK_DIVIDE_MASK, SD_CLK_DIVIDE_0); +} + +static void sd_normal_rw(struct realtek_pci_sdmmc *host, + struct mmc_request *mrq) +{ + struct mmc_command *cmd = mrq->cmd; + struct mmc_data *data = mrq->data; + u8 _cmd[5], *buf; + + _cmd[0] = 0x40 | (u8)cmd->opcode; + put_unaligned_be32(cmd->arg, (u32 *)(&_cmd[1])); + + buf = kzalloc(data->blksz, GFP_NOIO); + if (!buf) { + cmd->error = -ENOMEM; + return; + } + + if (data->flags & MMC_DATA_READ) { + if (host->initial_mode) + sd_disable_initial_mode(host); + + cmd->error = sd_read_data(host, _cmd, (u16)data->blksz, buf, + data->blksz, 200); + + if (host->initial_mode) + sd_enable_initial_mode(host); + + sg_copy_from_buffer(data->sg, data->sg_len, buf, data->blksz); + } else { + sg_copy_to_buffer(data->sg, data->sg_len, buf, data->blksz); + + cmd->error = sd_write_data(host, _cmd, (u16)data->blksz, buf, + data->blksz, 200); + } + + kfree(buf); +} + +static int sd_change_phase(struct realtek_pci_sdmmc *host, + u8 sample_point, bool rx) +{ + struct rtsx_pcr *pcr = host->pcr; + int err; + + dev_dbg(sdmmc_dev(host), "%s(%s): sample_point = %d\n", + __func__, rx ? "RX" : "TX", sample_point); + + rtsx_pci_init_cmd(pcr); + + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL, CHANGE_CLK, CHANGE_CLK); + if (rx) + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, + SD_VPRX_CTL, 0x1F, sample_point); + else + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, + SD_VPTX_CTL, 0x1F, sample_point); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK0_CTL, PHASE_NOT_RESET, 0); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK0_CTL, + PHASE_NOT_RESET, PHASE_NOT_RESET); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL, CHANGE_CLK, 0); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG1, SD_ASYNC_FIFO_NOT_RST, 0); + + err = rtsx_pci_send_cmd(pcr, 100); + if (err < 0) + return err; + + return 0; +} + +static inline u32 test_phase_bit(u32 phase_map, unsigned int bit) +{ + bit %= RTSX_PHASE_MAX; + return phase_map & (1 << bit); +} + +static int sd_get_phase_len(u32 phase_map, unsigned int start_bit) +{ + int i; + + for (i = 0; i < RTSX_PHASE_MAX; i++) { + if (test_phase_bit(phase_map, start_bit + i) == 0) + return i; + } + return RTSX_PHASE_MAX; +} + +static u8 sd_search_final_phase(struct realtek_pci_sdmmc *host, u32 phase_map) +{ + int start = 0, len = 0; + int start_final = 0, len_final = 0; + u8 final_phase = 0xFF; + + if (phase_map == 0) { + dev_err(sdmmc_dev(host), "phase error: [map:%x]\n", phase_map); + return final_phase; + } + + while (start < RTSX_PHASE_MAX) { + len = sd_get_phase_len(phase_map, start); + if (len_final < len) { + start_final = start; + len_final = len; + } + start += len ? len : 1; + } + + final_phase = (start_final + len_final / 2) % RTSX_PHASE_MAX; + dev_dbg(sdmmc_dev(host), "phase: [map:%x] [maxlen:%d] [final:%d]\n", + phase_map, len_final, final_phase); + + return final_phase; +} + +static void sd_wait_data_idle(struct realtek_pci_sdmmc *host) +{ + int err, i; + u8 val = 0; + + for (i = 0; i < 100; i++) { + err = rtsx_pci_read_register(host->pcr, SD_DATA_STATE, &val); + if (val & SD_DATA_IDLE) + return; + + udelay(100); + } +} + +static int sd_tuning_rx_cmd(struct realtek_pci_sdmmc *host, + u8 opcode, u8 sample_point) +{ + int err; + u8 cmd[5] = {0}; + + err = sd_change_phase(host, sample_point, true); + if (err < 0) + return err; + + cmd[0] = 0x40 | opcode; + err = sd_read_data(host, cmd, 0x40, NULL, 0, 100); + if (err < 0) { + /* Wait till SD DATA IDLE */ + sd_wait_data_idle(host); + sd_clear_error(host); + return err; + } + + return 0; +} + +static int sd_tuning_phase(struct realtek_pci_sdmmc *host, + u8 opcode, u32 *phase_map) +{ + int err, i; + u32 raw_phase_map = 0; + + for (i = 0; i < RTSX_PHASE_MAX; i++) { + err = sd_tuning_rx_cmd(host, opcode, (u8)i); + if (err == 0) + raw_phase_map |= 1 << i; + } + + if (phase_map) + *phase_map = raw_phase_map; + + return 0; +} + +static int sd_tuning_rx(struct realtek_pci_sdmmc *host, u8 opcode) +{ + int err, i; + u32 raw_phase_map[RX_TUNING_CNT] = {0}, phase_map; + u8 final_phase; + + for (i = 0; i < RX_TUNING_CNT; i++) { + err = sd_tuning_phase(host, opcode, &(raw_phase_map[i])); + if (err < 0) + return err; + + if (raw_phase_map[i] == 0) + break; + } + + phase_map = 0xFFFFFFFF; + for (i = 0; i < RX_TUNING_CNT; i++) { + dev_dbg(sdmmc_dev(host), "RX raw_phase_map[%d] = 0x%08x\n", + i, raw_phase_map[i]); + phase_map &= raw_phase_map[i]; + } + dev_dbg(sdmmc_dev(host), "RX phase_map = 0x%08x\n", phase_map); + + if (phase_map) { + final_phase = sd_search_final_phase(host, phase_map); + if (final_phase == 0xFF) + return -EINVAL; + + err = sd_change_phase(host, final_phase, true); + if (err < 0) + return err; + } else { + return -EINVAL; + } + + return 0; +} + +static void sdmmc_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct realtek_pci_sdmmc *host = mmc_priv(mmc); + struct rtsx_pcr *pcr = host->pcr; + struct mmc_command *cmd = mrq->cmd; + struct mmc_data *data = mrq->data; + unsigned int data_size = 0; + int err; + + if (host->eject) { + cmd->error = -ENOMEDIUM; + goto finish; + } + + err = rtsx_pci_card_exclusive_check(host->pcr, RTSX_SD_CARD); + if (err) { + cmd->error = err; + goto finish; + } + + mutex_lock(&pcr->pcr_mutex); + + rtsx_pci_start_run(pcr); + + rtsx_pci_switch_clock(pcr, host->clock, host->ssc_depth, + host->initial_mode, host->double_clk, host->vpclk); + rtsx_pci_write_register(pcr, CARD_SELECT, 0x07, SD_MOD_SEL); + rtsx_pci_write_register(pcr, CARD_SHARE_MODE, + CARD_SHARE_MASK, CARD_SHARE_48_SD); + + mutex_lock(&host->host_mutex); + host->mrq = mrq; + mutex_unlock(&host->host_mutex); + + if (mrq->data) + data_size = data->blocks * data->blksz; + + if (!data_size || mmc_op_multi(cmd->opcode) || + (cmd->opcode == MMC_READ_SINGLE_BLOCK) || + (cmd->opcode == MMC_WRITE_BLOCK)) { + sd_send_cmd_get_rsp(host, cmd); + + if (!cmd->error && data_size) { + sd_rw_multi(host, mrq); + + if (mmc_op_multi(cmd->opcode) && mrq->stop) + sd_send_cmd_get_rsp(host, mrq->stop); + } + } else { + sd_normal_rw(host, mrq); + } + + if (mrq->data) { + if (cmd->error || data->error) + data->bytes_xfered = 0; + else + data->bytes_xfered = data->blocks * data->blksz; + } + + mutex_unlock(&pcr->pcr_mutex); + +finish: + if (cmd->error) + dev_dbg(sdmmc_dev(host), "cmd->error = %d\n", cmd->error); + + mutex_lock(&host->host_mutex); + host->mrq = NULL; + mutex_unlock(&host->host_mutex); + + mmc_request_done(mmc, mrq); +} + +static int sd_set_bus_width(struct realtek_pci_sdmmc *host, + unsigned char bus_width) +{ + int err = 0; + u8 width[] = { + [MMC_BUS_WIDTH_1] = SD_BUS_WIDTH_1BIT, + [MMC_BUS_WIDTH_4] = SD_BUS_WIDTH_4BIT, + [MMC_BUS_WIDTH_8] = SD_BUS_WIDTH_8BIT, + }; + + if (bus_width <= MMC_BUS_WIDTH_8) + err = rtsx_pci_write_register(host->pcr, SD_CFG1, + 0x03, width[bus_width]); + + return err; +} + +static int sd_power_on(struct realtek_pci_sdmmc *host) +{ + struct rtsx_pcr *pcr = host->pcr; + int err; + + if (host->power_state == SDMMC_POWER_ON) + return 0; + + rtsx_pci_init_cmd(pcr); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_SELECT, 0x07, SD_MOD_SEL); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_SHARE_MODE, + CARD_SHARE_MASK, CARD_SHARE_48_SD); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_CLK_EN, + SD_CLK_EN, SD_CLK_EN); + err = rtsx_pci_send_cmd(pcr, 100); + if (err < 0) + return err; + + err = rtsx_pci_card_pull_ctl_enable(pcr, RTSX_SD_CARD); + if (err < 0) + return err; + + err = rtsx_pci_card_power_on(pcr, RTSX_SD_CARD); + if (err < 0) + return err; + + err = rtsx_pci_write_register(pcr, CARD_OE, SD_OUTPUT_EN, SD_OUTPUT_EN); + if (err < 0) + return err; + + host->power_state = SDMMC_POWER_ON; + return 0; +} + +static int sd_power_off(struct realtek_pci_sdmmc *host) +{ + struct rtsx_pcr *pcr = host->pcr; + int err; + + host->power_state = SDMMC_POWER_OFF; + + rtsx_pci_init_cmd(pcr); + + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_CLK_EN, SD_CLK_EN, 0); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_OE, SD_OUTPUT_EN, 0); + + err = rtsx_pci_send_cmd(pcr, 100); + if (err < 0) + return err; + + err = rtsx_pci_card_power_off(pcr, RTSX_SD_CARD); + if (err < 0) + return err; + + return rtsx_pci_card_pull_ctl_disable(pcr, RTSX_SD_CARD); +} + +static int sd_set_power_mode(struct realtek_pci_sdmmc *host, + unsigned char power_mode) +{ + int err; + + if (power_mode == MMC_POWER_OFF) + err = sd_power_off(host); + else + err = sd_power_on(host); + + return err; +} + +static int sd_set_timing(struct realtek_pci_sdmmc *host, unsigned char timing) +{ + struct rtsx_pcr *pcr = host->pcr; + int err = 0; + + rtsx_pci_init_cmd(pcr); + + switch (timing) { + case MMC_TIMING_UHS_SDR104: + case MMC_TIMING_UHS_SDR50: + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG1, + 0x0C | SD_ASYNC_FIFO_NOT_RST, + SD_30_MODE | SD_ASYNC_FIFO_NOT_RST); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL, + CLK_LOW_FREQ, CLK_LOW_FREQ); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_CLK_SOURCE, 0xFF, + CRC_VAR_CLK0 | SD30_FIX_CLK | SAMPLE_VAR_CLK1); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL, CLK_LOW_FREQ, 0); + break; + + case MMC_TIMING_MMC_DDR52: + case MMC_TIMING_UHS_DDR50: + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG1, + 0x0C | SD_ASYNC_FIFO_NOT_RST, + SD_DDR_MODE | SD_ASYNC_FIFO_NOT_RST); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL, + CLK_LOW_FREQ, CLK_LOW_FREQ); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_CLK_SOURCE, 0xFF, + CRC_VAR_CLK0 | SD30_FIX_CLK | SAMPLE_VAR_CLK1); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL, CLK_LOW_FREQ, 0); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_PUSH_POINT_CTL, + DDR_VAR_TX_CMD_DAT, DDR_VAR_TX_CMD_DAT); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_SAMPLE_POINT_CTL, + DDR_VAR_RX_DAT | DDR_VAR_RX_CMD, + DDR_VAR_RX_DAT | DDR_VAR_RX_CMD); + break; + + case MMC_TIMING_MMC_HS: + case MMC_TIMING_SD_HS: + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG1, + 0x0C, SD_20_MODE); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL, + CLK_LOW_FREQ, CLK_LOW_FREQ); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_CLK_SOURCE, 0xFF, + CRC_FIX_CLK | SD30_VAR_CLK0 | SAMPLE_VAR_CLK1); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL, CLK_LOW_FREQ, 0); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_PUSH_POINT_CTL, + SD20_TX_SEL_MASK, SD20_TX_14_AHEAD); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_SAMPLE_POINT_CTL, + SD20_RX_SEL_MASK, SD20_RX_14_DELAY); + break; + + default: + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, + SD_CFG1, 0x0C, SD_20_MODE); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL, + CLK_LOW_FREQ, CLK_LOW_FREQ); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_CLK_SOURCE, 0xFF, + CRC_FIX_CLK | SD30_VAR_CLK0 | SAMPLE_VAR_CLK1); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL, CLK_LOW_FREQ, 0); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, + SD_PUSH_POINT_CTL, 0xFF, 0); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_SAMPLE_POINT_CTL, + SD20_RX_SEL_MASK, SD20_RX_POS_EDGE); + break; + } + + err = rtsx_pci_send_cmd(pcr, 100); + + return err; +} + +static void sdmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct realtek_pci_sdmmc *host = mmc_priv(mmc); + struct rtsx_pcr *pcr = host->pcr; + + if (host->eject) + return; + + if (rtsx_pci_card_exclusive_check(host->pcr, RTSX_SD_CARD)) + return; + + mutex_lock(&pcr->pcr_mutex); + + rtsx_pci_start_run(pcr); + + sd_set_bus_width(host, ios->bus_width); + sd_set_power_mode(host, ios->power_mode); + sd_set_timing(host, ios->timing); + + host->vpclk = false; + host->double_clk = true; + + switch (ios->timing) { + case MMC_TIMING_UHS_SDR104: + case MMC_TIMING_UHS_SDR50: + host->ssc_depth = RTSX_SSC_DEPTH_2M; + host->vpclk = true; + host->double_clk = false; + break; + case MMC_TIMING_MMC_DDR52: + case MMC_TIMING_UHS_DDR50: + case MMC_TIMING_UHS_SDR25: + host->ssc_depth = RTSX_SSC_DEPTH_1M; + break; + default: + host->ssc_depth = RTSX_SSC_DEPTH_500K; + break; + } + + host->initial_mode = (ios->clock <= 1000000) ? true : false; + + host->clock = ios->clock; + rtsx_pci_switch_clock(pcr, ios->clock, host->ssc_depth, + host->initial_mode, host->double_clk, host->vpclk); + + mutex_unlock(&pcr->pcr_mutex); +} + +static int sdmmc_get_ro(struct mmc_host *mmc) +{ + struct realtek_pci_sdmmc *host = mmc_priv(mmc); + struct rtsx_pcr *pcr = host->pcr; + int ro = 0; + u32 val; + + if (host->eject) + return -ENOMEDIUM; + + mutex_lock(&pcr->pcr_mutex); + + rtsx_pci_start_run(pcr); + + /* Check SD mechanical write-protect switch */ + val = rtsx_pci_readl(pcr, RTSX_BIPR); + dev_dbg(sdmmc_dev(host), "%s: RTSX_BIPR = 0x%08x\n", __func__, val); + if (val & SD_WRITE_PROTECT) + ro = 1; + + mutex_unlock(&pcr->pcr_mutex); + + return ro; +} + +static int sdmmc_get_cd(struct mmc_host *mmc) +{ + struct realtek_pci_sdmmc *host = mmc_priv(mmc); + struct rtsx_pcr *pcr = host->pcr; + int cd = 0; + u32 val; + + if (host->eject) + return -ENOMEDIUM; + + mutex_lock(&pcr->pcr_mutex); + + rtsx_pci_start_run(pcr); + + /* Check SD card detect */ + val = rtsx_pci_card_exist(pcr); + dev_dbg(sdmmc_dev(host), "%s: RTSX_BIPR = 0x%08x\n", __func__, val); + if (val & SD_EXIST) + cd = 1; + + mutex_unlock(&pcr->pcr_mutex); + + return cd; +} + +static int sd_wait_voltage_stable_1(struct realtek_pci_sdmmc *host) +{ + struct rtsx_pcr *pcr = host->pcr; + int err; + u8 stat; + + /* Reference to Signal Voltage Switch Sequence in SD spec. + * Wait for a period of time so that the card can drive SD_CMD and + * SD_DAT[3:0] to low after sending back CMD11 response. + */ + mdelay(1); + + /* SD_CMD, SD_DAT[3:0] should be driven to low by card; + * If either one of SD_CMD,SD_DAT[3:0] is not low, + * abort the voltage switch sequence; + */ + err = rtsx_pci_read_register(pcr, SD_BUS_STAT, &stat); + if (err < 0) + return err; + + if (stat & (SD_CMD_STATUS | SD_DAT3_STATUS | SD_DAT2_STATUS | + SD_DAT1_STATUS | SD_DAT0_STATUS)) + return -EINVAL; + + /* Stop toggle SD clock */ + err = rtsx_pci_write_register(pcr, SD_BUS_STAT, + 0xFF, SD_CLK_FORCE_STOP); + if (err < 0) + return err; + + return 0; +} + +static int sd_wait_voltage_stable_2(struct realtek_pci_sdmmc *host) +{ + struct rtsx_pcr *pcr = host->pcr; + int err; + u8 stat, mask, val; + + /* Wait 1.8V output of voltage regulator in card stable */ + msleep(50); + + /* Toggle SD clock again */ + err = rtsx_pci_write_register(pcr, SD_BUS_STAT, 0xFF, SD_CLK_TOGGLE_EN); + if (err < 0) + return err; + + /* Wait for a period of time so that the card can drive + * SD_DAT[3:0] to high at 1.8V + */ + msleep(20); + + /* SD_CMD, SD_DAT[3:0] should be pulled high by host */ + err = rtsx_pci_read_register(pcr, SD_BUS_STAT, &stat); + if (err < 0) + return err; + + mask = SD_CMD_STATUS | SD_DAT3_STATUS | SD_DAT2_STATUS | + SD_DAT1_STATUS | SD_DAT0_STATUS; + val = SD_CMD_STATUS | SD_DAT3_STATUS | SD_DAT2_STATUS | + SD_DAT1_STATUS | SD_DAT0_STATUS; + if ((stat & mask) != val) { + dev_dbg(sdmmc_dev(host), + "%s: SD_BUS_STAT = 0x%x\n", __func__, stat); + rtsx_pci_write_register(pcr, SD_BUS_STAT, + SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP, 0); + rtsx_pci_write_register(pcr, CARD_CLK_EN, 0xFF, 0); + return -EINVAL; + } + + return 0; +} + +static int sdmmc_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct realtek_pci_sdmmc *host = mmc_priv(mmc); + struct rtsx_pcr *pcr = host->pcr; + int err = 0; + u8 voltage; + + dev_dbg(sdmmc_dev(host), "%s: signal_voltage = %d\n", + __func__, ios->signal_voltage); + + if (host->eject) + return -ENOMEDIUM; + + err = rtsx_pci_card_exclusive_check(host->pcr, RTSX_SD_CARD); + if (err) + return err; + + mutex_lock(&pcr->pcr_mutex); + + rtsx_pci_start_run(pcr); + + if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) + voltage = OUTPUT_3V3; + else + voltage = OUTPUT_1V8; + + if (voltage == OUTPUT_1V8) { + err = sd_wait_voltage_stable_1(host); + if (err < 0) + goto out; + } + + err = rtsx_pci_switch_output_voltage(pcr, voltage); + if (err < 0) + goto out; + + if (voltage == OUTPUT_1V8) { + err = sd_wait_voltage_stable_2(host); + if (err < 0) + goto out; + } + +out: + /* Stop toggle SD clock in idle */ + err = rtsx_pci_write_register(pcr, SD_BUS_STAT, + SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP, 0); + + mutex_unlock(&pcr->pcr_mutex); + + return err; +} + +static int sdmmc_execute_tuning(struct mmc_host *mmc, u32 opcode) +{ + struct realtek_pci_sdmmc *host = mmc_priv(mmc); + struct rtsx_pcr *pcr = host->pcr; + int err = 0; + + if (host->eject) + return -ENOMEDIUM; + + err = rtsx_pci_card_exclusive_check(host->pcr, RTSX_SD_CARD); + if (err) + return err; + + mutex_lock(&pcr->pcr_mutex); + + rtsx_pci_start_run(pcr); + + /* Set initial TX phase */ + switch (mmc->ios.timing) { + case MMC_TIMING_UHS_SDR104: + err = sd_change_phase(host, SDR104_TX_PHASE(pcr), false); + break; + + case MMC_TIMING_UHS_SDR50: + err = sd_change_phase(host, SDR50_TX_PHASE(pcr), false); + break; + + case MMC_TIMING_UHS_DDR50: + err = sd_change_phase(host, DDR50_TX_PHASE(pcr), false); + break; + + default: + err = 0; + } + + if (err) + goto out; + + /* Tuning RX phase */ + if ((mmc->ios.timing == MMC_TIMING_UHS_SDR104) || + (mmc->ios.timing == MMC_TIMING_UHS_SDR50)) + err = sd_tuning_rx(host, opcode); + else if (mmc->ios.timing == MMC_TIMING_UHS_DDR50) + err = sd_change_phase(host, DDR50_RX_PHASE(pcr), true); + +out: + mutex_unlock(&pcr->pcr_mutex); + + return err; +} + +static const struct mmc_host_ops realtek_pci_sdmmc_ops = { + .request = sdmmc_request, + .set_ios = sdmmc_set_ios, + .get_ro = sdmmc_get_ro, + .get_cd = sdmmc_get_cd, + .start_signal_voltage_switch = sdmmc_switch_voltage, + .execute_tuning = sdmmc_execute_tuning, +}; + +static void init_extra_caps(struct realtek_pci_sdmmc *host) +{ + struct mmc_host *mmc = host->mmc; + struct rtsx_pcr *pcr = host->pcr; + + dev_dbg(sdmmc_dev(host), "pcr->extra_caps = 0x%x\n", pcr->extra_caps); + + if (pcr->extra_caps & EXTRA_CAPS_SD_SDR50) + mmc->caps |= MMC_CAP_UHS_SDR50; + if (pcr->extra_caps & EXTRA_CAPS_SD_SDR104) + mmc->caps |= MMC_CAP_UHS_SDR104; + if (pcr->extra_caps & EXTRA_CAPS_SD_DDR50) + mmc->caps |= MMC_CAP_UHS_DDR50; + if (pcr->extra_caps & EXTRA_CAPS_MMC_HSDDR) + mmc->caps |= MMC_CAP_1_8V_DDR; + if (pcr->extra_caps & EXTRA_CAPS_MMC_8BIT) + mmc->caps |= MMC_CAP_8_BIT_DATA; +} + +static void realtek_init_host(struct realtek_pci_sdmmc *host) +{ + struct mmc_host *mmc = host->mmc; + + mmc->f_min = 250000; + mmc->f_max = 208000000; + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; + mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_BUS_WIDTH_TEST | + MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25; + mmc->max_current_330 = 400; + mmc->max_current_180 = 800; + mmc->ops = &realtek_pci_sdmmc_ops; + + init_extra_caps(host); + + mmc->max_segs = 256; + mmc->max_seg_size = 65536; + mmc->max_blk_size = 512; + mmc->max_blk_count = 65535; + mmc->max_req_size = 524288; +} + +static void rtsx_pci_sdmmc_card_event(struct platform_device *pdev) +{ + struct realtek_pci_sdmmc *host = platform_get_drvdata(pdev); + + mmc_detect_change(host->mmc, 0); +} + +static int rtsx_pci_sdmmc_drv_probe(struct platform_device *pdev) +{ + struct mmc_host *mmc; + struct realtek_pci_sdmmc *host; + struct rtsx_pcr *pcr; + struct pcr_handle *handle = pdev->dev.platform_data; + + if (!handle) + return -ENXIO; + + pcr = handle->pcr; + if (!pcr) + return -ENXIO; + + dev_dbg(&(pdev->dev), ": Realtek PCI-E SDMMC controller found\n"); + + mmc = mmc_alloc_host(sizeof(*host), &pdev->dev); + if (!mmc) + return -ENOMEM; + + host = mmc_priv(mmc); + host->pcr = pcr; + host->mmc = mmc; + host->pdev = pdev; + host->power_state = SDMMC_POWER_OFF; + platform_set_drvdata(pdev, host); + pcr->slots[RTSX_SD_CARD].p_dev = pdev; + pcr->slots[RTSX_SD_CARD].card_event = rtsx_pci_sdmmc_card_event; + + mutex_init(&host->host_mutex); + + realtek_init_host(host); + + mmc_add_host(mmc); + + return 0; +} + +static int rtsx_pci_sdmmc_drv_remove(struct platform_device *pdev) +{ + struct realtek_pci_sdmmc *host = platform_get_drvdata(pdev); + struct rtsx_pcr *pcr; + struct mmc_host *mmc; + + if (!host) + return 0; + + pcr = host->pcr; + pcr->slots[RTSX_SD_CARD].p_dev = NULL; + pcr->slots[RTSX_SD_CARD].card_event = NULL; + mmc = host->mmc; + + mutex_lock(&host->host_mutex); + if (host->mrq) { + dev_dbg(&(pdev->dev), + "%s: Controller removed during transfer\n", + mmc_hostname(mmc)); + + rtsx_pci_complete_unfinished_transfer(pcr); + + host->mrq->cmd->error = -ENOMEDIUM; + if (host->mrq->stop) + host->mrq->stop->error = -ENOMEDIUM; + mmc_request_done(mmc, host->mrq); + } + mutex_unlock(&host->host_mutex); + + mmc_remove_host(mmc); + host->eject = true; + + mmc_free_host(mmc); + + dev_dbg(&(pdev->dev), + ": Realtek PCI-E SDMMC controller has been removed\n"); + + return 0; +} + +static struct platform_device_id rtsx_pci_sdmmc_ids[] = { + { + .name = DRV_NAME_RTSX_PCI_SDMMC, + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(platform, rtsx_pci_sdmmc_ids); + +static struct platform_driver rtsx_pci_sdmmc_driver = { + .probe = rtsx_pci_sdmmc_drv_probe, + .remove = rtsx_pci_sdmmc_drv_remove, + .id_table = rtsx_pci_sdmmc_ids, + .driver = { + .owner = THIS_MODULE, + .name = DRV_NAME_RTSX_PCI_SDMMC, + }, +}; +module_platform_driver(rtsx_pci_sdmmc_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Wei WANG <wei_wang@realsil.com.cn>"); +MODULE_DESCRIPTION("Realtek PCI-E SD/MMC Card Host Driver"); diff --git a/drivers/mmc/host/rtsx_usb_sdmmc.c b/drivers/mmc/host/rtsx_usb_sdmmc.c new file mode 100644 index 00000000000..5d3766e792f --- /dev/null +++ b/drivers/mmc/host/rtsx_usb_sdmmc.c @@ -0,0 +1,1456 @@ +/* Realtek USB SD/MMC Card Interface driver + * + * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + * Author: + * Roger Tseng <rogerable@realtek.com> + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/usb.h> +#include <linux/mmc/host.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/sd.h> +#include <linux/mmc/sdio.h> +#include <linux/mmc/card.h> +#include <linux/scatterlist.h> +#include <linux/pm_runtime.h> + +#include <linux/mfd/rtsx_usb.h> +#include <asm/unaligned.h> + +#if defined(CONFIG_LEDS_CLASS) || (defined(CONFIG_LEDS_CLASS_MODULE) && \ + defined(CONFIG_MMC_REALTEK_USB_MODULE)) +#include <linux/leds.h> +#include <linux/workqueue.h> +#define RTSX_USB_USE_LEDS_CLASS +#endif + +struct rtsx_usb_sdmmc { + struct platform_device *pdev; + struct rtsx_ucr *ucr; + struct mmc_host *mmc; + struct mmc_request *mrq; + + struct mutex host_mutex; + + u8 ssc_depth; + unsigned int clock; + bool vpclk; + bool double_clk; + bool host_removal; + bool card_exist; + bool initial_mode; + bool ddr_mode; + + unsigned char power_mode; + +#ifdef RTSX_USB_USE_LEDS_CLASS + struct led_classdev led; + char led_name[32]; + struct work_struct led_work; +#endif +}; + +static inline struct device *sdmmc_dev(struct rtsx_usb_sdmmc *host) +{ + return &(host->pdev->dev); +} + +static inline void sd_clear_error(struct rtsx_usb_sdmmc *host) +{ + struct rtsx_ucr *ucr = host->ucr; + rtsx_usb_ep0_write_register(ucr, CARD_STOP, + SD_STOP | SD_CLR_ERR, + SD_STOP | SD_CLR_ERR); + + rtsx_usb_clear_dma_err(ucr); + rtsx_usb_clear_fsm_err(ucr); +} + +#ifdef DEBUG +static void sd_print_debug_regs(struct rtsx_usb_sdmmc *host) +{ + struct rtsx_ucr *ucr = host->ucr; + u8 val = 0; + + rtsx_usb_ep0_read_register(ucr, SD_STAT1, &val); + dev_dbg(sdmmc_dev(host), "SD_STAT1: 0x%x\n", val); + rtsx_usb_ep0_read_register(ucr, SD_STAT2, &val); + dev_dbg(sdmmc_dev(host), "SD_STAT2: 0x%x\n", val); + rtsx_usb_ep0_read_register(ucr, SD_BUS_STAT, &val); + dev_dbg(sdmmc_dev(host), "SD_BUS_STAT: 0x%x\n", val); +} +#else +#define sd_print_debug_regs(host) +#endif /* DEBUG */ + +static int sd_read_data(struct rtsx_usb_sdmmc *host, struct mmc_command *cmd, + u16 byte_cnt, u8 *buf, int buf_len, int timeout) +{ + struct rtsx_ucr *ucr = host->ucr; + int err; + u8 trans_mode; + + if (!buf) + buf_len = 0; + + rtsx_usb_init_cmd(ucr); + if (cmd != NULL) { + dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD%d\n", __func__ + , cmd->opcode); + if (cmd->opcode == MMC_SEND_TUNING_BLOCK) + trans_mode = SD_TM_AUTO_TUNING; + else + trans_mode = SD_TM_NORMAL_READ; + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + SD_CMD0, 0xFF, (u8)(cmd->opcode) | 0x40); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + SD_CMD1, 0xFF, (u8)(cmd->arg >> 24)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + SD_CMD2, 0xFF, (u8)(cmd->arg >> 16)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + SD_CMD3, 0xFF, (u8)(cmd->arg >> 8)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + SD_CMD4, 0xFF, (u8)cmd->arg); + } else { + trans_mode = SD_TM_AUTO_READ_3; + } + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BYTE_CNT_L, 0xFF, (u8)byte_cnt); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BYTE_CNT_H, + 0xFF, (u8)(byte_cnt >> 8)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BLOCK_CNT_L, 0xFF, 1); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BLOCK_CNT_H, 0xFF, 0); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG2, 0xFF, + SD_CALCULATE_CRC7 | SD_CHECK_CRC16 | + SD_NO_WAIT_BUSY_END | SD_CHECK_CRC7 | SD_RSP_LEN_6); + if (trans_mode != SD_TM_AUTO_TUNING) + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + CARD_DATA_SOURCE, 0x01, PINGPONG_BUFFER); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_TRANSFER, + 0xFF, trans_mode | SD_TRANSFER_START); + rtsx_usb_add_cmd(ucr, CHECK_REG_CMD, SD_TRANSFER, + SD_TRANSFER_END, SD_TRANSFER_END); + + if (cmd != NULL) { + rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD1, 0, 0); + rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD2, 0, 0); + rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD3, 0, 0); + rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD4, 0, 0); + } + + err = rtsx_usb_send_cmd(ucr, MODE_CR, timeout); + if (err) { + dev_dbg(sdmmc_dev(host), + "rtsx_usb_send_cmd failed (err = %d)\n", err); + return err; + } + + err = rtsx_usb_get_rsp(ucr, !cmd ? 1 : 5, timeout); + if (err || (ucr->rsp_buf[0] & SD_TRANSFER_ERR)) { + sd_print_debug_regs(host); + + if (!err) { + dev_dbg(sdmmc_dev(host), + "Transfer failed (SD_TRANSFER = %02x)\n", + ucr->rsp_buf[0]); + err = -EIO; + } else { + dev_dbg(sdmmc_dev(host), + "rtsx_usb_get_rsp failed (err = %d)\n", err); + } + + return err; + } + + if (cmd != NULL) { + cmd->resp[0] = get_unaligned_be32(ucr->rsp_buf + 1); + dev_dbg(sdmmc_dev(host), "cmd->resp[0] = 0x%08x\n", + cmd->resp[0]); + } + + if (buf && buf_len) { + /* 2-byte aligned part */ + err = rtsx_usb_read_ppbuf(ucr, buf, byte_cnt - (byte_cnt % 2)); + if (err) { + dev_dbg(sdmmc_dev(host), + "rtsx_usb_read_ppbuf failed (err = %d)\n", err); + return err; + } + + /* unaligned byte */ + if (byte_cnt % 2) + return rtsx_usb_read_register(ucr, + PPBUF_BASE2 + byte_cnt, + buf + byte_cnt - 1); + } + + return 0; +} + +static int sd_write_data(struct rtsx_usb_sdmmc *host, struct mmc_command *cmd, + u16 byte_cnt, u8 *buf, int buf_len, int timeout) +{ + struct rtsx_ucr *ucr = host->ucr; + int err; + u8 trans_mode; + + if (!buf) + buf_len = 0; + + if (buf && buf_len) { + err = rtsx_usb_write_ppbuf(ucr, buf, buf_len); + if (err) { + dev_dbg(sdmmc_dev(host), + "rtsx_usb_write_ppbuf failed (err = %d)\n", + err); + return err; + } + } + + trans_mode = (cmd != NULL) ? SD_TM_AUTO_WRITE_2 : SD_TM_AUTO_WRITE_3; + rtsx_usb_init_cmd(ucr); + + if (cmd != NULL) { + dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD%d\n", __func__, + cmd->opcode); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + SD_CMD0, 0xFF, (u8)(cmd->opcode) | 0x40); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + SD_CMD1, 0xFF, (u8)(cmd->arg >> 24)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + SD_CMD2, 0xFF, (u8)(cmd->arg >> 16)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + SD_CMD3, 0xFF, (u8)(cmd->arg >> 8)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + SD_CMD4, 0xFF, (u8)cmd->arg); + } + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BYTE_CNT_L, 0xFF, (u8)byte_cnt); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BYTE_CNT_H, + 0xFF, (u8)(byte_cnt >> 8)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BLOCK_CNT_L, 0xFF, 1); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BLOCK_CNT_H, 0xFF, 0); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG2, 0xFF, + SD_CALCULATE_CRC7 | SD_CHECK_CRC16 | + SD_NO_WAIT_BUSY_END | SD_CHECK_CRC7 | SD_RSP_LEN_6); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + CARD_DATA_SOURCE, 0x01, PINGPONG_BUFFER); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_TRANSFER, 0xFF, + trans_mode | SD_TRANSFER_START); + rtsx_usb_add_cmd(ucr, CHECK_REG_CMD, SD_TRANSFER, + SD_TRANSFER_END, SD_TRANSFER_END); + + if (cmd != NULL) { + rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD1, 0, 0); + rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD2, 0, 0); + rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD3, 0, 0); + rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD4, 0, 0); + } + + err = rtsx_usb_send_cmd(ucr, MODE_CR, timeout); + if (err) { + dev_dbg(sdmmc_dev(host), + "rtsx_usb_send_cmd failed (err = %d)\n", err); + return err; + } + + err = rtsx_usb_get_rsp(ucr, !cmd ? 1 : 5, timeout); + if (err) { + sd_print_debug_regs(host); + dev_dbg(sdmmc_dev(host), + "rtsx_usb_get_rsp failed (err = %d)\n", err); + return err; + } + + if (cmd != NULL) { + cmd->resp[0] = get_unaligned_be32(ucr->rsp_buf + 1); + dev_dbg(sdmmc_dev(host), "cmd->resp[0] = 0x%08x\n", + cmd->resp[0]); + } + + return 0; +} + +static void sd_send_cmd_get_rsp(struct rtsx_usb_sdmmc *host, + struct mmc_command *cmd) +{ + struct rtsx_ucr *ucr = host->ucr; + u8 cmd_idx = (u8)cmd->opcode; + u32 arg = cmd->arg; + int err = 0; + int timeout = 100; + int i; + u8 *ptr; + int stat_idx = 0; + int len = 2; + u8 rsp_type; + + dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD %d, arg = 0x%08x\n", + __func__, cmd_idx, arg); + + /* Response type: + * R0 + * R1, R5, R6, R7 + * R1b + * R2 + * R3, R4 + */ + switch (mmc_resp_type(cmd)) { + case MMC_RSP_NONE: + rsp_type = SD_RSP_TYPE_R0; + break; + case MMC_RSP_R1: + rsp_type = SD_RSP_TYPE_R1; + break; + case MMC_RSP_R1 & ~MMC_RSP_CRC: + rsp_type = SD_RSP_TYPE_R1 | SD_NO_CHECK_CRC7; + break; + case MMC_RSP_R1B: + rsp_type = SD_RSP_TYPE_R1b; + break; + case MMC_RSP_R2: + rsp_type = SD_RSP_TYPE_R2; + break; + case MMC_RSP_R3: + rsp_type = SD_RSP_TYPE_R3; + break; + default: + dev_dbg(sdmmc_dev(host), "cmd->flag is not valid\n"); + err = -EINVAL; + goto out; + } + + if (rsp_type == SD_RSP_TYPE_R1b) + timeout = 3000; + + if (cmd->opcode == SD_SWITCH_VOLTAGE) { + err = rtsx_usb_write_register(ucr, SD_BUS_STAT, + SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP, + SD_CLK_TOGGLE_EN); + if (err) + goto out; + } + + rtsx_usb_init_cmd(ucr); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CMD0, 0xFF, 0x40 | cmd_idx); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CMD1, 0xFF, (u8)(arg >> 24)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CMD2, 0xFF, (u8)(arg >> 16)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CMD3, 0xFF, (u8)(arg >> 8)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CMD4, 0xFF, (u8)arg); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG2, 0xFF, rsp_type); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_DATA_SOURCE, + 0x01, PINGPONG_BUFFER); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_TRANSFER, + 0xFF, SD_TM_CMD_RSP | SD_TRANSFER_START); + rtsx_usb_add_cmd(ucr, CHECK_REG_CMD, SD_TRANSFER, + SD_TRANSFER_END | SD_STAT_IDLE, + SD_TRANSFER_END | SD_STAT_IDLE); + + if (rsp_type == SD_RSP_TYPE_R2) { + /* Read data from ping-pong buffer */ + for (i = PPBUF_BASE2; i < PPBUF_BASE2 + 16; i++) + rtsx_usb_add_cmd(ucr, READ_REG_CMD, (u16)i, 0, 0); + stat_idx = 16; + } else if (rsp_type != SD_RSP_TYPE_R0) { + /* Read data from SD_CMDx registers */ + for (i = SD_CMD0; i <= SD_CMD4; i++) + rtsx_usb_add_cmd(ucr, READ_REG_CMD, (u16)i, 0, 0); + stat_idx = 5; + } + len += stat_idx; + + rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_STAT1, 0, 0); + + err = rtsx_usb_send_cmd(ucr, MODE_CR, 100); + if (err) { + dev_dbg(sdmmc_dev(host), + "rtsx_usb_send_cmd error (err = %d)\n", err); + goto out; + } + + err = rtsx_usb_get_rsp(ucr, len, timeout); + if (err || (ucr->rsp_buf[0] & SD_TRANSFER_ERR)) { + sd_print_debug_regs(host); + sd_clear_error(host); + + if (!err) { + dev_dbg(sdmmc_dev(host), + "Transfer failed (SD_TRANSFER = %02x)\n", + ucr->rsp_buf[0]); + err = -EIO; + } else { + dev_dbg(sdmmc_dev(host), + "rtsx_usb_get_rsp failed (err = %d)\n", err); + } + + goto out; + } + + if (rsp_type == SD_RSP_TYPE_R0) { + err = 0; + goto out; + } + + /* Skip result of CHECK_REG_CMD */ + ptr = ucr->rsp_buf + 1; + + /* Check (Start,Transmission) bit of Response */ + if ((ptr[0] & 0xC0) != 0) { + err = -EILSEQ; + dev_dbg(sdmmc_dev(host), "Invalid response bit\n"); + goto out; + } + + /* Check CRC7 */ + if (!(rsp_type & SD_NO_CHECK_CRC7)) { + if (ptr[stat_idx] & SD_CRC7_ERR) { + err = -EILSEQ; + dev_dbg(sdmmc_dev(host), "CRC7 error\n"); + goto out; + } + } + + if (rsp_type == SD_RSP_TYPE_R2) { + for (i = 0; i < 4; i++) { + cmd->resp[i] = get_unaligned_be32(ptr + 1 + i * 4); + dev_dbg(sdmmc_dev(host), "cmd->resp[%d] = 0x%08x\n", + i, cmd->resp[i]); + } + } else { + cmd->resp[0] = get_unaligned_be32(ptr + 1); + dev_dbg(sdmmc_dev(host), "cmd->resp[0] = 0x%08x\n", + cmd->resp[0]); + } + +out: + cmd->error = err; +} + +static int sd_rw_multi(struct rtsx_usb_sdmmc *host, struct mmc_request *mrq) +{ + struct rtsx_ucr *ucr = host->ucr; + struct mmc_data *data = mrq->data; + int read = (data->flags & MMC_DATA_READ) ? 1 : 0; + u8 cfg2, trans_mode; + int err; + u8 flag; + size_t data_len = data->blksz * data->blocks; + unsigned int pipe; + + if (read) { + dev_dbg(sdmmc_dev(host), "%s: read %zu bytes\n", + __func__, data_len); + cfg2 = SD_CALCULATE_CRC7 | SD_CHECK_CRC16 | + SD_NO_WAIT_BUSY_END | SD_CHECK_CRC7 | SD_RSP_LEN_0; + trans_mode = SD_TM_AUTO_READ_3; + } else { + dev_dbg(sdmmc_dev(host), "%s: write %zu bytes\n", + __func__, data_len); + cfg2 = SD_NO_CALCULATE_CRC7 | SD_CHECK_CRC16 | + SD_NO_WAIT_BUSY_END | SD_NO_CHECK_CRC7 | SD_RSP_LEN_0; + trans_mode = SD_TM_AUTO_WRITE_3; + } + + rtsx_usb_init_cmd(ucr); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BYTE_CNT_L, 0xFF, 0x00); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BYTE_CNT_H, 0xFF, 0x02); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BLOCK_CNT_L, + 0xFF, (u8)data->blocks); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BLOCK_CNT_H, + 0xFF, (u8)(data->blocks >> 8)); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_DATA_SOURCE, + 0x01, RING_BUFFER); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_TC3, + 0xFF, (u8)(data_len >> 24)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_TC2, + 0xFF, (u8)(data_len >> 16)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_TC1, + 0xFF, (u8)(data_len >> 8)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_TC0, + 0xFF, (u8)data_len); + if (read) { + flag = MODE_CDIR; + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_CTL, + 0x03 | DMA_PACK_SIZE_MASK, + DMA_DIR_FROM_CARD | DMA_EN | DMA_512); + } else { + flag = MODE_CDOR; + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_CTL, + 0x03 | DMA_PACK_SIZE_MASK, + DMA_DIR_TO_CARD | DMA_EN | DMA_512); + } + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG2, 0xFF, cfg2); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_TRANSFER, 0xFF, + trans_mode | SD_TRANSFER_START); + rtsx_usb_add_cmd(ucr, CHECK_REG_CMD, SD_TRANSFER, + SD_TRANSFER_END, SD_TRANSFER_END); + + err = rtsx_usb_send_cmd(ucr, flag, 100); + if (err) + return err; + + if (read) + pipe = usb_rcvbulkpipe(ucr->pusb_dev, EP_BULK_IN); + else + pipe = usb_sndbulkpipe(ucr->pusb_dev, EP_BULK_OUT); + + err = rtsx_usb_transfer_data(ucr, pipe, data->sg, data_len, + data->sg_len, NULL, 10000); + if (err) { + dev_dbg(sdmmc_dev(host), "rtsx_usb_transfer_data error %d\n" + , err); + sd_clear_error(host); + return err; + } + + return rtsx_usb_get_rsp(ucr, 1, 2000); +} + +static inline void sd_enable_initial_mode(struct rtsx_usb_sdmmc *host) +{ + rtsx_usb_write_register(host->ucr, SD_CFG1, + SD_CLK_DIVIDE_MASK, SD_CLK_DIVIDE_128); +} + +static inline void sd_disable_initial_mode(struct rtsx_usb_sdmmc *host) +{ + rtsx_usb_write_register(host->ucr, SD_CFG1, + SD_CLK_DIVIDE_MASK, SD_CLK_DIVIDE_0); +} + +static void sd_normal_rw(struct rtsx_usb_sdmmc *host, + struct mmc_request *mrq) +{ + struct mmc_command *cmd = mrq->cmd; + struct mmc_data *data = mrq->data; + u8 *buf; + + buf = kzalloc(data->blksz, GFP_NOIO); + if (!buf) { + cmd->error = -ENOMEM; + return; + } + + if (data->flags & MMC_DATA_READ) { + if (host->initial_mode) + sd_disable_initial_mode(host); + + cmd->error = sd_read_data(host, cmd, (u16)data->blksz, buf, + data->blksz, 200); + + if (host->initial_mode) + sd_enable_initial_mode(host); + + sg_copy_from_buffer(data->sg, data->sg_len, buf, data->blksz); + } else { + sg_copy_to_buffer(data->sg, data->sg_len, buf, data->blksz); + + cmd->error = sd_write_data(host, cmd, (u16)data->blksz, buf, + data->blksz, 200); + } + + kfree(buf); +} + +static int sd_change_phase(struct rtsx_usb_sdmmc *host, u8 sample_point, int tx) +{ + struct rtsx_ucr *ucr = host->ucr; + int err; + + dev_dbg(sdmmc_dev(host), "%s: %s sample_point = %d\n", + __func__, tx ? "TX" : "RX", sample_point); + + rtsx_usb_init_cmd(ucr); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CLK_DIV, CLK_CHANGE, CLK_CHANGE); + + if (tx) + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_VPCLK0_CTL, + 0x0F, sample_point); + else + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_VPCLK1_CTL, + 0x0F, sample_point); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_VPCLK0_CTL, PHASE_NOT_RESET, 0); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_VPCLK0_CTL, + PHASE_NOT_RESET, PHASE_NOT_RESET); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CLK_DIV, CLK_CHANGE, 0); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG1, SD_ASYNC_FIFO_RST, 0); + + err = rtsx_usb_send_cmd(ucr, MODE_C, 100); + if (err) + return err; + + return 0; +} + +static inline u32 get_phase_point(u32 phase_map, unsigned int idx) +{ + idx &= MAX_PHASE; + return phase_map & (1 << idx); +} + +static int get_phase_len(u32 phase_map, unsigned int idx) +{ + int i; + + for (i = 0; i < MAX_PHASE + 1; i++) { + if (get_phase_point(phase_map, idx + i) == 0) + return i; + } + return MAX_PHASE + 1; +} + +static u8 sd_search_final_phase(struct rtsx_usb_sdmmc *host, u32 phase_map) +{ + int start = 0, len = 0; + int start_final = 0, len_final = 0; + u8 final_phase = 0xFF; + + if (phase_map == 0) { + dev_dbg(sdmmc_dev(host), "Phase: [map:%x]\n", phase_map); + return final_phase; + } + + while (start < MAX_PHASE + 1) { + len = get_phase_len(phase_map, start); + if (len_final < len) { + start_final = start; + len_final = len; + } + start += len ? len : 1; + } + + final_phase = (start_final + len_final / 2) & MAX_PHASE; + dev_dbg(sdmmc_dev(host), "Phase: [map:%x] [maxlen:%d] [final:%d]\n", + phase_map, len_final, final_phase); + + return final_phase; +} + +static void sd_wait_data_idle(struct rtsx_usb_sdmmc *host) +{ + int err, i; + u8 val = 0; + + for (i = 0; i < 100; i++) { + err = rtsx_usb_ep0_read_register(host->ucr, + SD_DATA_STATE, &val); + if (val & SD_DATA_IDLE) + return; + + usleep_range(100, 1000); + } +} + +static int sd_tuning_rx_cmd(struct rtsx_usb_sdmmc *host, + u8 opcode, u8 sample_point) +{ + int err; + struct mmc_command cmd = {0}; + + err = sd_change_phase(host, sample_point, 0); + if (err) + return err; + + cmd.opcode = MMC_SEND_TUNING_BLOCK; + err = sd_read_data(host, &cmd, 0x40, NULL, 0, 100); + if (err) { + /* Wait till SD DATA IDLE */ + sd_wait_data_idle(host); + sd_clear_error(host); + return err; + } + + return 0; +} + +static void sd_tuning_phase(struct rtsx_usb_sdmmc *host, + u8 opcode, u16 *phase_map) +{ + int err, i; + u16 raw_phase_map = 0; + + for (i = MAX_PHASE; i >= 0; i--) { + err = sd_tuning_rx_cmd(host, opcode, (u8)i); + if (!err) + raw_phase_map |= 1 << i; + } + + if (phase_map) + *phase_map = raw_phase_map; +} + +static int sd_tuning_rx(struct rtsx_usb_sdmmc *host, u8 opcode) +{ + int err, i; + u16 raw_phase_map[RX_TUNING_CNT] = {0}, phase_map; + u8 final_phase; + + /* setting fixed default TX phase */ + err = sd_change_phase(host, 0x01, 1); + if (err) { + dev_dbg(sdmmc_dev(host), "TX phase setting failed\n"); + return err; + } + + /* tuning RX phase */ + for (i = 0; i < RX_TUNING_CNT; i++) { + sd_tuning_phase(host, opcode, &(raw_phase_map[i])); + + if (raw_phase_map[i] == 0) + break; + } + + phase_map = 0xFFFF; + for (i = 0; i < RX_TUNING_CNT; i++) { + dev_dbg(sdmmc_dev(host), "RX raw_phase_map[%d] = 0x%04x\n", + i, raw_phase_map[i]); + phase_map &= raw_phase_map[i]; + } + dev_dbg(sdmmc_dev(host), "RX phase_map = 0x%04x\n", phase_map); + + if (phase_map) { + final_phase = sd_search_final_phase(host, phase_map); + if (final_phase == 0xFF) + return -EINVAL; + + err = sd_change_phase(host, final_phase, 0); + if (err) + return err; + } else { + return -EINVAL; + } + + return 0; +} + +static int sdmmc_get_ro(struct mmc_host *mmc) +{ + struct rtsx_usb_sdmmc *host = mmc_priv(mmc); + struct rtsx_ucr *ucr = host->ucr; + int err; + u16 val; + + if (host->host_removal) + return -ENOMEDIUM; + + mutex_lock(&ucr->dev_mutex); + + /* Check SD card detect */ + err = rtsx_usb_get_card_status(ucr, &val); + + mutex_unlock(&ucr->dev_mutex); + + + /* Treat failed detection as non-ro */ + if (err) + return 0; + + if (val & SD_WP) + return 1; + + return 0; +} + +static int sdmmc_get_cd(struct mmc_host *mmc) +{ + struct rtsx_usb_sdmmc *host = mmc_priv(mmc); + struct rtsx_ucr *ucr = host->ucr; + int err; + u16 val; + + if (host->host_removal) + return -ENOMEDIUM; + + mutex_lock(&ucr->dev_mutex); + + /* Check SD card detect */ + err = rtsx_usb_get_card_status(ucr, &val); + + mutex_unlock(&ucr->dev_mutex); + + /* Treat failed detection as non-exist */ + if (err) + goto no_card; + + if (val & SD_CD) { + host->card_exist = true; + return 1; + } + +no_card: + host->card_exist = false; + return 0; +} + +static void sdmmc_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct rtsx_usb_sdmmc *host = mmc_priv(mmc); + struct rtsx_ucr *ucr = host->ucr; + struct mmc_command *cmd = mrq->cmd; + struct mmc_data *data = mrq->data; + unsigned int data_size = 0; + + dev_dbg(sdmmc_dev(host), "%s\n", __func__); + + if (host->host_removal) { + cmd->error = -ENOMEDIUM; + goto finish; + } + + if ((!host->card_exist)) { + cmd->error = -ENOMEDIUM; + goto finish_detect_card; + } + + /* + * Reject SDIO CMDs to speed up card identification + * since unsupported + */ + if (cmd->opcode == SD_IO_SEND_OP_COND || + cmd->opcode == SD_IO_RW_DIRECT || + cmd->opcode == SD_IO_RW_EXTENDED) { + cmd->error = -EINVAL; + goto finish; + } + + mutex_lock(&ucr->dev_mutex); + + mutex_lock(&host->host_mutex); + host->mrq = mrq; + mutex_unlock(&host->host_mutex); + + if (mrq->data) + data_size = data->blocks * data->blksz; + + if (!data_size) { + sd_send_cmd_get_rsp(host, cmd); + } else if ((!(data_size % 512) && cmd->opcode != MMC_SEND_EXT_CSD) || + mmc_op_multi(cmd->opcode)) { + sd_send_cmd_get_rsp(host, cmd); + + if (!cmd->error) { + sd_rw_multi(host, mrq); + + if (mmc_op_multi(cmd->opcode) && mrq->stop) { + sd_send_cmd_get_rsp(host, mrq->stop); + rtsx_usb_write_register(ucr, MC_FIFO_CTL, + FIFO_FLUSH, FIFO_FLUSH); + } + } + } else { + sd_normal_rw(host, mrq); + } + + if (mrq->data) { + if (cmd->error || data->error) + data->bytes_xfered = 0; + else + data->bytes_xfered = data->blocks * data->blksz; + } + + mutex_unlock(&ucr->dev_mutex); + +finish_detect_card: + if (cmd->error) { + /* + * detect card when fail to update card existence state and + * speed up card removal when retry + */ + sdmmc_get_cd(mmc); + dev_dbg(sdmmc_dev(host), "cmd->error = %d\n", cmd->error); + } + +finish: + mutex_lock(&host->host_mutex); + host->mrq = NULL; + mutex_unlock(&host->host_mutex); + + mmc_request_done(mmc, mrq); +} + +static int sd_set_bus_width(struct rtsx_usb_sdmmc *host, + unsigned char bus_width) +{ + int err = 0; + u8 width[] = { + [MMC_BUS_WIDTH_1] = SD_BUS_WIDTH_1BIT, + [MMC_BUS_WIDTH_4] = SD_BUS_WIDTH_4BIT, + [MMC_BUS_WIDTH_8] = SD_BUS_WIDTH_8BIT, + }; + + if (bus_width <= MMC_BUS_WIDTH_8) + err = rtsx_usb_write_register(host->ucr, SD_CFG1, + 0x03, width[bus_width]); + + return err; +} + +static int sd_pull_ctl_disable_lqfp48(struct rtsx_ucr *ucr) +{ + rtsx_usb_init_cmd(ucr); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0x55); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0x55); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0x95); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x55); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x55); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0xA5); + + return rtsx_usb_send_cmd(ucr, MODE_C, 100); +} + +static int sd_pull_ctl_disable_qfn24(struct rtsx_ucr *ucr) +{ + rtsx_usb_init_cmd(ucr); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0x65); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0x55); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0x95); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x55); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x56); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0x59); + + return rtsx_usb_send_cmd(ucr, MODE_C, 100); +} + +static int sd_pull_ctl_enable_lqfp48(struct rtsx_ucr *ucr) +{ + rtsx_usb_init_cmd(ucr); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0xAA); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0xAA); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0xA9); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x55); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x55); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0xA5); + + return rtsx_usb_send_cmd(ucr, MODE_C, 100); +} + +static int sd_pull_ctl_enable_qfn24(struct rtsx_ucr *ucr) +{ + rtsx_usb_init_cmd(ucr); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0xA5); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0x9A); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0xA5); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x9A); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x65); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0x5A); + + return rtsx_usb_send_cmd(ucr, MODE_C, 100); +} + +static int sd_power_on(struct rtsx_usb_sdmmc *host) +{ + struct rtsx_ucr *ucr = host->ucr; + int err; + + dev_dbg(sdmmc_dev(host), "%s\n", __func__); + rtsx_usb_init_cmd(ucr); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_SELECT, 0x07, SD_MOD_SEL); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_SHARE_MODE, + CARD_SHARE_MASK, CARD_SHARE_SD); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_CLK_EN, + SD_CLK_EN, SD_CLK_EN); + err = rtsx_usb_send_cmd(ucr, MODE_C, 100); + if (err) + return err; + + if (CHECK_PKG(ucr, LQFP48)) + err = sd_pull_ctl_enable_lqfp48(ucr); + else + err = sd_pull_ctl_enable_qfn24(ucr); + if (err) + return err; + + err = rtsx_usb_write_register(ucr, CARD_PWR_CTL, + POWER_MASK, PARTIAL_POWER_ON); + if (err) + return err; + + usleep_range(800, 1000); + + rtsx_usb_init_cmd(ucr); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PWR_CTL, + POWER_MASK|LDO3318_PWR_MASK, POWER_ON|LDO_ON); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_OE, + SD_OUTPUT_EN, SD_OUTPUT_EN); + + return rtsx_usb_send_cmd(ucr, MODE_C, 100); +} + +static int sd_power_off(struct rtsx_usb_sdmmc *host) +{ + struct rtsx_ucr *ucr = host->ucr; + int err; + + dev_dbg(sdmmc_dev(host), "%s\n", __func__); + rtsx_usb_init_cmd(ucr); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_CLK_EN, SD_CLK_EN, 0); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_OE, SD_OUTPUT_EN, 0); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PWR_CTL, + POWER_MASK, POWER_OFF); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PWR_CTL, + POWER_MASK|LDO3318_PWR_MASK, POWER_OFF|LDO_SUSPEND); + + err = rtsx_usb_send_cmd(ucr, MODE_C, 100); + if (err) + return err; + + if (CHECK_PKG(ucr, LQFP48)) + return sd_pull_ctl_disable_lqfp48(ucr); + return sd_pull_ctl_disable_qfn24(ucr); +} + +static int sd_set_power_mode(struct rtsx_usb_sdmmc *host, + unsigned char power_mode) +{ + int err; + + if (power_mode != MMC_POWER_OFF) + power_mode = MMC_POWER_ON; + + if (power_mode == host->power_mode) + return 0; + + if (power_mode == MMC_POWER_OFF) { + err = sd_power_off(host); + pm_runtime_put(sdmmc_dev(host)); + } else { + pm_runtime_get_sync(sdmmc_dev(host)); + err = sd_power_on(host); + } + + if (!err) + host->power_mode = power_mode; + + return err; +} + +static int sd_set_timing(struct rtsx_usb_sdmmc *host, + unsigned char timing, bool *ddr_mode) +{ + struct rtsx_ucr *ucr = host->ucr; + int err; + + *ddr_mode = false; + + rtsx_usb_init_cmd(ucr); + + switch (timing) { + case MMC_TIMING_UHS_SDR104: + case MMC_TIMING_UHS_SDR50: + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG1, + 0x0C | SD_ASYNC_FIFO_RST, + SD_30_MODE | SD_ASYNC_FIFO_RST); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_CLK_SOURCE, 0xFF, + CRC_VAR_CLK0 | SD30_FIX_CLK | SAMPLE_VAR_CLK1); + break; + + case MMC_TIMING_UHS_DDR50: + *ddr_mode = true; + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG1, + 0x0C | SD_ASYNC_FIFO_RST, + SD_DDR_MODE | SD_ASYNC_FIFO_RST); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_CLK_SOURCE, 0xFF, + CRC_VAR_CLK0 | SD30_FIX_CLK | SAMPLE_VAR_CLK1); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_PUSH_POINT_CTL, + DDR_VAR_TX_CMD_DAT, DDR_VAR_TX_CMD_DAT); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_SAMPLE_POINT_CTL, + DDR_VAR_RX_DAT | DDR_VAR_RX_CMD, + DDR_VAR_RX_DAT | DDR_VAR_RX_CMD); + break; + + case MMC_TIMING_MMC_HS: + case MMC_TIMING_SD_HS: + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG1, + 0x0C, SD_20_MODE); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_CLK_SOURCE, 0xFF, + CRC_FIX_CLK | SD30_VAR_CLK0 | SAMPLE_VAR_CLK1); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_PUSH_POINT_CTL, + SD20_TX_SEL_MASK, SD20_TX_14_AHEAD); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_SAMPLE_POINT_CTL, + SD20_RX_SEL_MASK, SD20_RX_14_DELAY); + break; + + default: + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + SD_CFG1, 0x0C, SD_20_MODE); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_CLK_SOURCE, 0xFF, + CRC_FIX_CLK | SD30_VAR_CLK0 | SAMPLE_VAR_CLK1); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + SD_PUSH_POINT_CTL, 0xFF, 0); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_SAMPLE_POINT_CTL, + SD20_RX_SEL_MASK, SD20_RX_POS_EDGE); + break; + } + + err = rtsx_usb_send_cmd(ucr, MODE_C, 100); + + return err; +} + +static void sdmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct rtsx_usb_sdmmc *host = mmc_priv(mmc); + struct rtsx_ucr *ucr = host->ucr; + + dev_dbg(sdmmc_dev(host), "%s\n", __func__); + mutex_lock(&ucr->dev_mutex); + + if (rtsx_usb_card_exclusive_check(ucr, RTSX_USB_SD_CARD)) { + mutex_unlock(&ucr->dev_mutex); + return; + } + + sd_set_power_mode(host, ios->power_mode); + sd_set_bus_width(host, ios->bus_width); + sd_set_timing(host, ios->timing, &host->ddr_mode); + + host->vpclk = false; + host->double_clk = true; + + switch (ios->timing) { + case MMC_TIMING_UHS_SDR104: + case MMC_TIMING_UHS_SDR50: + host->ssc_depth = SSC_DEPTH_2M; + host->vpclk = true; + host->double_clk = false; + break; + case MMC_TIMING_UHS_DDR50: + case MMC_TIMING_UHS_SDR25: + host->ssc_depth = SSC_DEPTH_1M; + break; + default: + host->ssc_depth = SSC_DEPTH_512K; + break; + } + + host->initial_mode = (ios->clock <= 1000000) ? true : false; + host->clock = ios->clock; + + rtsx_usb_switch_clock(host->ucr, host->clock, host->ssc_depth, + host->initial_mode, host->double_clk, host->vpclk); + + mutex_unlock(&ucr->dev_mutex); + dev_dbg(sdmmc_dev(host), "%s end\n", __func__); +} + +static int sdmmc_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct rtsx_usb_sdmmc *host = mmc_priv(mmc); + struct rtsx_ucr *ucr = host->ucr; + int err = 0; + + dev_dbg(sdmmc_dev(host), "%s: signal_voltage = %d\n", + __func__, ios->signal_voltage); + + if (host->host_removal) + return -ENOMEDIUM; + + if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_120) + return -EPERM; + + mutex_lock(&ucr->dev_mutex); + + err = rtsx_usb_card_exclusive_check(ucr, RTSX_USB_SD_CARD); + if (err) { + mutex_unlock(&ucr->dev_mutex); + return err; + } + + /* Let mmc core do the busy checking, simply stop the forced-toggle + * clock(while issuing CMD11) and switch voltage. + */ + rtsx_usb_init_cmd(ucr); + + if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) { + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_PAD_CTL, + SD_IO_USING_1V8, SD_IO_USING_3V3); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, LDO_POWER_CFG, + TUNE_SD18_MASK, TUNE_SD18_3V3); + } else { + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BUS_STAT, + SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP, + SD_CLK_FORCE_STOP); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_PAD_CTL, + SD_IO_USING_1V8, SD_IO_USING_1V8); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, LDO_POWER_CFG, + TUNE_SD18_MASK, TUNE_SD18_1V8); + } + + err = rtsx_usb_send_cmd(ucr, MODE_C, 100); + mutex_unlock(&ucr->dev_mutex); + + return err; +} + +static int sdmmc_card_busy(struct mmc_host *mmc) +{ + struct rtsx_usb_sdmmc *host = mmc_priv(mmc); + struct rtsx_ucr *ucr = host->ucr; + int err; + u8 stat; + u8 mask = SD_DAT3_STATUS | SD_DAT2_STATUS | SD_DAT1_STATUS + | SD_DAT0_STATUS; + + dev_dbg(sdmmc_dev(host), "%s\n", __func__); + + mutex_lock(&ucr->dev_mutex); + + err = rtsx_usb_write_register(ucr, SD_BUS_STAT, + SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP, + SD_CLK_TOGGLE_EN); + if (err) + goto out; + + mdelay(1); + + err = rtsx_usb_read_register(ucr, SD_BUS_STAT, &stat); + if (err) + goto out; + + err = rtsx_usb_write_register(ucr, SD_BUS_STAT, + SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP, 0); +out: + mutex_unlock(&ucr->dev_mutex); + + if (err) + return err; + + /* check if any pin between dat[0:3] is low */ + if ((stat & mask) != mask) + return 1; + else + return 0; +} + +static int sdmmc_execute_tuning(struct mmc_host *mmc, u32 opcode) +{ + struct rtsx_usb_sdmmc *host = mmc_priv(mmc); + struct rtsx_ucr *ucr = host->ucr; + int err = 0; + + if (host->host_removal) + return -ENOMEDIUM; + + mutex_lock(&ucr->dev_mutex); + + if (!host->ddr_mode) + err = sd_tuning_rx(host, MMC_SEND_TUNING_BLOCK); + + mutex_unlock(&ucr->dev_mutex); + + return err; +} + +static const struct mmc_host_ops rtsx_usb_sdmmc_ops = { + .request = sdmmc_request, + .set_ios = sdmmc_set_ios, + .get_ro = sdmmc_get_ro, + .get_cd = sdmmc_get_cd, + .start_signal_voltage_switch = sdmmc_switch_voltage, + .card_busy = sdmmc_card_busy, + .execute_tuning = sdmmc_execute_tuning, +}; + +#ifdef RTSX_USB_USE_LEDS_CLASS +static void rtsx_usb_led_control(struct led_classdev *led, + enum led_brightness brightness) +{ + struct rtsx_usb_sdmmc *host = container_of(led, + struct rtsx_usb_sdmmc, led); + + if (host->host_removal) + return; + + host->led.brightness = brightness; + schedule_work(&host->led_work); +} + +static void rtsx_usb_update_led(struct work_struct *work) +{ + struct rtsx_usb_sdmmc *host = + container_of(work, struct rtsx_usb_sdmmc, led_work); + struct rtsx_ucr *ucr = host->ucr; + + mutex_lock(&ucr->dev_mutex); + + if (host->led.brightness == LED_OFF) + rtsx_usb_turn_off_led(ucr); + else + rtsx_usb_turn_on_led(ucr); + + mutex_unlock(&ucr->dev_mutex); +} +#endif + +static void rtsx_usb_init_host(struct rtsx_usb_sdmmc *host) +{ + struct mmc_host *mmc = host->mmc; + + mmc->f_min = 250000; + mmc->f_max = 208000000; + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; + mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_BUS_WIDTH_TEST | + MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | MMC_CAP_UHS_SDR50 | + MMC_CAP_NEEDS_POLL; + + mmc->max_current_330 = 400; + mmc->max_current_180 = 800; + mmc->ops = &rtsx_usb_sdmmc_ops; + mmc->max_segs = 256; + mmc->max_seg_size = 65536; + mmc->max_blk_size = 512; + mmc->max_blk_count = 65535; + mmc->max_req_size = 524288; + + host->power_mode = MMC_POWER_OFF; +} + +static int rtsx_usb_sdmmc_drv_probe(struct platform_device *pdev) +{ + struct mmc_host *mmc; + struct rtsx_usb_sdmmc *host; + struct rtsx_ucr *ucr; +#ifdef RTSX_USB_USE_LEDS_CLASS + int err; +#endif + + ucr = usb_get_intfdata(to_usb_interface(pdev->dev.parent)); + if (!ucr) + return -ENXIO; + + dev_dbg(&(pdev->dev), ": Realtek USB SD/MMC controller found\n"); + + mmc = mmc_alloc_host(sizeof(*host), &pdev->dev); + if (!mmc) + return -ENOMEM; + + host = mmc_priv(mmc); + host->ucr = ucr; + host->mmc = mmc; + host->pdev = pdev; + platform_set_drvdata(pdev, host); + + mutex_init(&host->host_mutex); + rtsx_usb_init_host(host); + pm_runtime_enable(&pdev->dev); + +#ifdef RTSX_USB_USE_LEDS_CLASS + snprintf(host->led_name, sizeof(host->led_name), + "%s::", mmc_hostname(mmc)); + host->led.name = host->led_name; + host->led.brightness = LED_OFF; + host->led.default_trigger = mmc_hostname(mmc); + host->led.brightness_set = rtsx_usb_led_control; + + err = led_classdev_register(mmc_dev(mmc), &host->led); + if (err) + dev_err(&(pdev->dev), + "Failed to register LED device: %d\n", err); + INIT_WORK(&host->led_work, rtsx_usb_update_led); + +#endif + mmc_add_host(mmc); + + return 0; +} + +static int rtsx_usb_sdmmc_drv_remove(struct platform_device *pdev) +{ + struct rtsx_usb_sdmmc *host = platform_get_drvdata(pdev); + struct mmc_host *mmc; + + if (!host) + return 0; + + mmc = host->mmc; + host->host_removal = true; + + mutex_lock(&host->host_mutex); + if (host->mrq) { + dev_dbg(&(pdev->dev), + "%s: Controller removed during transfer\n", + mmc_hostname(mmc)); + host->mrq->cmd->error = -ENOMEDIUM; + if (host->mrq->stop) + host->mrq->stop->error = -ENOMEDIUM; + mmc_request_done(mmc, host->mrq); + } + mutex_unlock(&host->host_mutex); + + mmc_remove_host(mmc); + +#ifdef RTSX_USB_USE_LEDS_CLASS + cancel_work_sync(&host->led_work); + led_classdev_unregister(&host->led); +#endif + + mmc_free_host(mmc); + pm_runtime_disable(&pdev->dev); + platform_set_drvdata(pdev, NULL); + + dev_dbg(&(pdev->dev), + ": Realtek USB SD/MMC module has been removed\n"); + + return 0; +} + +static struct platform_device_id rtsx_usb_sdmmc_ids[] = { + { + .name = "rtsx_usb_sdmmc", + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(platform, rtsx_usb_sdmmc_ids); + +static struct platform_driver rtsx_usb_sdmmc_driver = { + .probe = rtsx_usb_sdmmc_drv_probe, + .remove = rtsx_usb_sdmmc_drv_remove, + .id_table = rtsx_usb_sdmmc_ids, + .driver = { + .owner = THIS_MODULE, + .name = "rtsx_usb_sdmmc", + }, +}; +module_platform_driver(rtsx_usb_sdmmc_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Roger Tseng <rogerable@realtek.com>"); +MODULE_DESCRIPTION("Realtek USB SD/MMC Card Host Driver"); diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 1ccd4b256ce..f23782683a7 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -23,17 +23,97 @@ #include <linux/irq.h> #include <linux/io.h> +#include <plat/gpio-cfg.h> #include <mach/dma.h> +#include <mach/gpio-samsung.h> -#include <mach/regs-sdi.h> -#include <mach/regs-gpio.h> - -#include <plat/mci.h> +#include <linux/platform_data/mmc-s3cmci.h> #include "s3cmci.h" #define DRIVER_NAME "s3c-mci" +#define S3C2410_SDICON (0x00) +#define S3C2410_SDIPRE (0x04) +#define S3C2410_SDICMDARG (0x08) +#define S3C2410_SDICMDCON (0x0C) +#define S3C2410_SDICMDSTAT (0x10) +#define S3C2410_SDIRSP0 (0x14) +#define S3C2410_SDIRSP1 (0x18) +#define S3C2410_SDIRSP2 (0x1C) +#define S3C2410_SDIRSP3 (0x20) +#define S3C2410_SDITIMER (0x24) +#define S3C2410_SDIBSIZE (0x28) +#define S3C2410_SDIDCON (0x2C) +#define S3C2410_SDIDCNT (0x30) +#define S3C2410_SDIDSTA (0x34) +#define S3C2410_SDIFSTA (0x38) + +#define S3C2410_SDIDATA (0x3C) +#define S3C2410_SDIIMSK (0x40) + +#define S3C2440_SDIDATA (0x40) +#define S3C2440_SDIIMSK (0x3C) + +#define S3C2440_SDICON_SDRESET (1 << 8) +#define S3C2410_SDICON_SDIOIRQ (1 << 3) +#define S3C2410_SDICON_FIFORESET (1 << 1) +#define S3C2410_SDICON_CLOCKTYPE (1 << 0) + +#define S3C2410_SDICMDCON_LONGRSP (1 << 10) +#define S3C2410_SDICMDCON_WAITRSP (1 << 9) +#define S3C2410_SDICMDCON_CMDSTART (1 << 8) +#define S3C2410_SDICMDCON_SENDERHOST (1 << 6) +#define S3C2410_SDICMDCON_INDEX (0x3f) + +#define S3C2410_SDICMDSTAT_CRCFAIL (1 << 12) +#define S3C2410_SDICMDSTAT_CMDSENT (1 << 11) +#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1 << 10) +#define S3C2410_SDICMDSTAT_RSPFIN (1 << 9) + +#define S3C2440_SDIDCON_DS_WORD (2 << 22) +#define S3C2410_SDIDCON_TXAFTERRESP (1 << 20) +#define S3C2410_SDIDCON_RXAFTERCMD (1 << 19) +#define S3C2410_SDIDCON_BLOCKMODE (1 << 17) +#define S3C2410_SDIDCON_WIDEBUS (1 << 16) +#define S3C2410_SDIDCON_DMAEN (1 << 15) +#define S3C2410_SDIDCON_STOP (1 << 14) +#define S3C2440_SDIDCON_DATSTART (1 << 14) + +#define S3C2410_SDIDCON_XFER_RXSTART (2 << 12) +#define S3C2410_SDIDCON_XFER_TXSTART (3 << 12) + +#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF) + +#define S3C2410_SDIDSTA_SDIOIRQDETECT (1 << 9) +#define S3C2410_SDIDSTA_FIFOFAIL (1 << 8) +#define S3C2410_SDIDSTA_CRCFAIL (1 << 7) +#define S3C2410_SDIDSTA_RXCRCFAIL (1 << 6) +#define S3C2410_SDIDSTA_DATATIMEOUT (1 << 5) +#define S3C2410_SDIDSTA_XFERFINISH (1 << 4) +#define S3C2410_SDIDSTA_TXDATAON (1 << 1) +#define S3C2410_SDIDSTA_RXDATAON (1 << 0) + +#define S3C2440_SDIFSTA_FIFORESET (1 << 16) +#define S3C2440_SDIFSTA_FIFOFAIL (3 << 14) +#define S3C2410_SDIFSTA_TFDET (1 << 13) +#define S3C2410_SDIFSTA_RFDET (1 << 12) +#define S3C2410_SDIFSTA_COUNTMASK (0x7f) + +#define S3C2410_SDIIMSK_RESPONSECRC (1 << 17) +#define S3C2410_SDIIMSK_CMDSENT (1 << 16) +#define S3C2410_SDIIMSK_CMDTIMEOUT (1 << 15) +#define S3C2410_SDIIMSK_RESPONSEND (1 << 14) +#define S3C2410_SDIIMSK_SDIOIRQ (1 << 12) +#define S3C2410_SDIIMSK_FIFOFAIL (1 << 11) +#define S3C2410_SDIIMSK_CRCSTATUS (1 << 10) +#define S3C2410_SDIIMSK_DATACRC (1 << 9) +#define S3C2410_SDIIMSK_DATATIMEOUT (1 << 8) +#define S3C2410_SDIIMSK_DATAFINISH (1 << 7) +#define S3C2410_SDIIMSK_TXFIFOHALF (1 << 4) +#define S3C2410_SDIIMSK_RXFIFOLAST (1 << 2) +#define S3C2410_SDIIMSK_RXFIFOHALF (1 << 0) + enum dbg_channels { dbg_err = (1 << 0), dbg_debug = (1 << 1), @@ -247,7 +327,7 @@ static void s3cmci_check_sdio_irq(struct s3cmci_host *host) { if (host->sdio_irqen) { if (gpio_get_value(S3C2410_GPE(8)) == 0) { - printk(KERN_DEBUG "%s: signalling irq\n", __func__); + pr_debug("%s: signalling irq\n", __func__); mmc_signal_sdio_irq(host->mmc); } } @@ -344,7 +424,7 @@ static void s3cmci_disable_irq(struct s3cmci_host *host, bool transfer) local_irq_save(flags); - //printk(KERN_DEBUG "%s: transfer %d\n", __func__, transfer); + /* pr_debug("%s: transfer %d\n", __func__, transfer); */ host->irq_disabled = transfer; @@ -874,7 +954,7 @@ static void finalize_request(struct s3cmci_host *host) if (!mrq->data) goto request_done; - /* Calulate the amout of bytes transfer if there was no error */ + /* Calculate the amout of bytes transfer if there was no error */ if (mrq->data->error == 0) { mrq->data->bytes_xfered = (mrq->data->blocks * mrq->data->blksz); @@ -882,7 +962,7 @@ static void finalize_request(struct s3cmci_host *host) mrq->data->bytes_xfered = 0; } - /* If we had an error while transfering data we flush the + /* If we had an error while transferring data we flush the * DMA channel and the fifo to clear out any garbage. */ if (mrq->data->error != 0) { if (s3cmci_host_usedma(host)) @@ -913,9 +993,9 @@ request_done: } static void s3cmci_dma_setup(struct s3cmci_host *host, - enum s3c2410_dmasrc source) + enum dma_data_direction source) { - static enum s3c2410_dmasrc last_source = -1; + static enum dma_data_direction last_source = -1; static int setup_ok; if (last_source == source) @@ -980,7 +1060,7 @@ static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data) if ((data->blksz & 3) != 0) { /* We cannot deal with unaligned blocks with more than - * one block being transfered. */ + * one block being transferred. */ if (data->blocks > 1) { pr_warning("%s: can't do non-word sized block transfers (blksz %d)\n", __func__, data->blksz); @@ -1087,7 +1167,7 @@ static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data) BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR); - s3cmci_dma_setup(host, rw ? S3C2410_DMASRC_MEM : S3C2410_DMASRC_HW); + s3cmci_dma_setup(host, rw ? DMA_TO_DEVICE : DMA_FROM_DEVICE); s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH); dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, @@ -1237,12 +1317,9 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) switch (ios->power_mode) { case MMC_POWER_ON: case MMC_POWER_UP: - s3c2410_gpio_cfgpin(S3C2410_GPE(5), S3C2410_GPE5_SDCLK); - s3c2410_gpio_cfgpin(S3C2410_GPE(6), S3C2410_GPE6_SDCMD); - s3c2410_gpio_cfgpin(S3C2410_GPE(7), S3C2410_GPE7_SDDAT0); - s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1); - s3c2410_gpio_cfgpin(S3C2410_GPE(9), S3C2410_GPE9_SDDAT2); - s3c2410_gpio_cfgpin(S3C2410_GPE(10), S3C2410_GPE10_SDDAT3); + /* Configure GPE5...GPE10 pins in SD mode */ + s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE); if (host->pdata->set_power) host->pdata->set_power(ios->power_mode, ios->vdd); @@ -1544,7 +1621,7 @@ static inline void s3cmci_debugfs_remove(struct s3cmci_host *host) { } #endif /* CONFIG_DEBUG_FS */ -static int __devinit s3cmci_probe(struct platform_device *pdev) +static int s3cmci_probe(struct platform_device *pdev) { struct s3cmci_host *host; struct mmc_host *mmc; @@ -1606,7 +1683,7 @@ static int __devinit s3cmci_probe(struct platform_device *pdev) host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!host->mem) { dev_err(&pdev->dev, - "failed to get io memory region resouce.\n"); + "failed to get io memory region resource.\n"); ret = -ENOENT; goto probe_free_gpio; @@ -1630,7 +1707,7 @@ static int __devinit s3cmci_probe(struct platform_device *pdev) host->irq = platform_get_irq(pdev, 0); if (host->irq == 0) { - dev_err(&pdev->dev, "failed to get interrupt resouce.\n"); + dev_err(&pdev->dev, "failed to get interrupt resource.\n"); ret = -EINVAL; goto probe_iounmap; } @@ -1823,7 +1900,7 @@ static void s3cmci_shutdown(struct platform_device *pdev) clk_disable(host->clk); } -static int __devexit s3cmci_remove(struct platform_device *pdev) +static int s3cmci_remove(struct platform_device *pdev) { struct mmc_host *mmc = platform_get_drvdata(pdev); struct s3cmci_host *host = mmc_priv(mmc); @@ -1874,58 +1951,18 @@ static struct platform_device_id s3cmci_driver_ids[] = { MODULE_DEVICE_TABLE(platform, s3cmci_driver_ids); - -#ifdef CONFIG_PM - -static int s3cmci_suspend(struct device *dev) -{ - struct mmc_host *mmc = platform_get_drvdata(to_platform_device(dev)); - - return mmc_suspend_host(mmc); -} - -static int s3cmci_resume(struct device *dev) -{ - struct mmc_host *mmc = platform_get_drvdata(to_platform_device(dev)); - - return mmc_resume_host(mmc); -} - -static const struct dev_pm_ops s3cmci_pm = { - .suspend = s3cmci_suspend, - .resume = s3cmci_resume, -}; - -#define s3cmci_pm_ops &s3cmci_pm -#else /* CONFIG_PM */ -#define s3cmci_pm_ops NULL -#endif /* CONFIG_PM */ - - static struct platform_driver s3cmci_driver = { .driver = { .name = "s3c-sdi", .owner = THIS_MODULE, - .pm = s3cmci_pm_ops, }, .id_table = s3cmci_driver_ids, .probe = s3cmci_probe, - .remove = __devexit_p(s3cmci_remove), + .remove = s3cmci_remove, .shutdown = s3cmci_shutdown, }; -static int __init s3cmci_init(void) -{ - return platform_driver_register(&s3cmci_driver); -} - -static void __exit s3cmci_exit(void) -{ - platform_driver_unregister(&s3cmci_driver); -} - -module_init(s3cmci_init); -module_exit(s3cmci_exit); +module_platform_driver(s3cmci_driver); MODULE_DESCRIPTION("Samsung S3C MMC/SD Card Interface driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c new file mode 100644 index 00000000000..8ce3c28cb76 --- /dev/null +++ b/drivers/mmc/host/sdhci-acpi.c @@ -0,0 +1,417 @@ +/* + * Secure Digital Host Controller Interface ACPI driver. + * + * Copyright (c) 2012, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + */ + +#include <linux/init.h> +#include <linux/export.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/dma-mapping.h> +#include <linux/compiler.h> +#include <linux/stddef.h> +#include <linux/bitops.h> +#include <linux/types.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/acpi.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> +#include <linux/delay.h> + +#include <linux/mmc/host.h> +#include <linux/mmc/pm.h> +#include <linux/mmc/slot-gpio.h> +#include <linux/mmc/sdhci.h> + +#include "sdhci.h" + +enum { + SDHCI_ACPI_SD_CD = BIT(0), + SDHCI_ACPI_RUNTIME_PM = BIT(1), + SDHCI_ACPI_SD_CD_OVERRIDE_LEVEL = BIT(2), +}; + +struct sdhci_acpi_chip { + const struct sdhci_ops *ops; + unsigned int quirks; + unsigned int quirks2; + unsigned long caps; + unsigned int caps2; + mmc_pm_flag_t pm_caps; +}; + +struct sdhci_acpi_slot { + const struct sdhci_acpi_chip *chip; + unsigned int quirks; + unsigned int quirks2; + unsigned long caps; + unsigned int caps2; + mmc_pm_flag_t pm_caps; + unsigned int flags; +}; + +struct sdhci_acpi_host { + struct sdhci_host *host; + const struct sdhci_acpi_slot *slot; + struct platform_device *pdev; + bool use_runtime_pm; +}; + +static inline bool sdhci_acpi_flag(struct sdhci_acpi_host *c, unsigned int flag) +{ + return c->slot && (c->slot->flags & flag); +} + +static int sdhci_acpi_enable_dma(struct sdhci_host *host) +{ + return 0; +} + +static void sdhci_acpi_int_hw_reset(struct sdhci_host *host) +{ + u8 reg; + + reg = sdhci_readb(host, SDHCI_POWER_CONTROL); + reg |= 0x10; + sdhci_writeb(host, reg, SDHCI_POWER_CONTROL); + /* For eMMC, minimum is 1us but give it 9us for good measure */ + udelay(9); + reg &= ~0x10; + sdhci_writeb(host, reg, SDHCI_POWER_CONTROL); + /* For eMMC, minimum is 200us but give it 300us for good measure */ + usleep_range(300, 1000); +} + +static const struct sdhci_ops sdhci_acpi_ops_dflt = { + .set_clock = sdhci_set_clock, + .enable_dma = sdhci_acpi_enable_dma, + .set_bus_width = sdhci_set_bus_width, + .reset = sdhci_reset, + .set_uhs_signaling = sdhci_set_uhs_signaling, +}; + +static const struct sdhci_ops sdhci_acpi_ops_int = { + .set_clock = sdhci_set_clock, + .enable_dma = sdhci_acpi_enable_dma, + .set_bus_width = sdhci_set_bus_width, + .reset = sdhci_reset, + .set_uhs_signaling = sdhci_set_uhs_signaling, + .hw_reset = sdhci_acpi_int_hw_reset, +}; + +static const struct sdhci_acpi_chip sdhci_acpi_chip_int = { + .ops = &sdhci_acpi_ops_int, +}; + +static const struct sdhci_acpi_slot sdhci_acpi_slot_int_emmc = { + .chip = &sdhci_acpi_chip_int, + .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE | MMC_CAP_HW_RESET, + .caps2 = MMC_CAP2_HC_ERASE_SZ, + .flags = SDHCI_ACPI_RUNTIME_PM, +}; + +static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sdio = { + .quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION, + .quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON, + .caps = MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD, + .flags = SDHCI_ACPI_RUNTIME_PM, + .pm_caps = MMC_PM_KEEP_POWER, +}; + +static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sd = { + .flags = SDHCI_ACPI_SD_CD | SDHCI_ACPI_SD_CD_OVERRIDE_LEVEL | + SDHCI_ACPI_RUNTIME_PM, + .quirks2 = SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON, +}; + +struct sdhci_acpi_uid_slot { + const char *hid; + const char *uid; + const struct sdhci_acpi_slot *slot; +}; + +static const struct sdhci_acpi_uid_slot sdhci_acpi_uids[] = { + { "80860F14" , "1" , &sdhci_acpi_slot_int_emmc }, + { "80860F14" , "3" , &sdhci_acpi_slot_int_sd }, + { "80860F16" , NULL, &sdhci_acpi_slot_int_sd }, + { "INT33BB" , "2" , &sdhci_acpi_slot_int_sdio }, + { "INT33C6" , NULL, &sdhci_acpi_slot_int_sdio }, + { "INT3436" , NULL, &sdhci_acpi_slot_int_sdio }, + { "PNP0D40" }, + { }, +}; + +static const struct acpi_device_id sdhci_acpi_ids[] = { + { "80860F14" }, + { "80860F16" }, + { "INT33BB" }, + { "INT33C6" }, + { "INT3436" }, + { "PNP0D40" }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, sdhci_acpi_ids); + +static const struct sdhci_acpi_slot *sdhci_acpi_get_slot_by_ids(const char *hid, + const char *uid) +{ + const struct sdhci_acpi_uid_slot *u; + + for (u = sdhci_acpi_uids; u->hid; u++) { + if (strcmp(u->hid, hid)) + continue; + if (!u->uid) + return u->slot; + if (uid && !strcmp(u->uid, uid)) + return u->slot; + } + return NULL; +} + +static const struct sdhci_acpi_slot *sdhci_acpi_get_slot(acpi_handle handle, + const char *hid) +{ + const struct sdhci_acpi_slot *slot; + struct acpi_device_info *info; + const char *uid = NULL; + acpi_status status; + + status = acpi_get_object_info(handle, &info); + if (!ACPI_FAILURE(status) && (info->valid & ACPI_VALID_UID)) + uid = info->unique_id.string; + + slot = sdhci_acpi_get_slot_by_ids(hid, uid); + + kfree(info); + return slot; +} + +static int sdhci_acpi_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + acpi_handle handle = ACPI_HANDLE(dev); + struct acpi_device *device; + struct sdhci_acpi_host *c; + struct sdhci_host *host; + struct resource *iomem; + resource_size_t len; + const char *hid; + int err; + + if (acpi_bus_get_device(handle, &device)) + return -ENODEV; + + if (acpi_bus_get_status(device) || !device->status.present) + return -ENODEV; + + hid = acpi_device_hid(device); + + iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!iomem) + return -ENOMEM; + + len = resource_size(iomem); + if (len < 0x100) + dev_err(dev, "Invalid iomem size!\n"); + + if (!devm_request_mem_region(dev, iomem->start, len, dev_name(dev))) + return -ENOMEM; + + host = sdhci_alloc_host(dev, sizeof(struct sdhci_acpi_host)); + if (IS_ERR(host)) + return PTR_ERR(host); + + c = sdhci_priv(host); + c->host = host; + c->slot = sdhci_acpi_get_slot(handle, hid); + c->pdev = pdev; + c->use_runtime_pm = sdhci_acpi_flag(c, SDHCI_ACPI_RUNTIME_PM); + + platform_set_drvdata(pdev, c); + + host->hw_name = "ACPI"; + host->ops = &sdhci_acpi_ops_dflt; + host->irq = platform_get_irq(pdev, 0); + + host->ioaddr = devm_ioremap_nocache(dev, iomem->start, + resource_size(iomem)); + if (host->ioaddr == NULL) { + err = -ENOMEM; + goto err_free; + } + + if (!dev->dma_mask) { + u64 dma_mask; + + if (sdhci_readl(host, SDHCI_CAPABILITIES) & SDHCI_CAN_64BIT) { + /* 64-bit DMA is not supported at present */ + dma_mask = DMA_BIT_MASK(32); + } else { + dma_mask = DMA_BIT_MASK(32); + } + + err = dma_coerce_mask_and_coherent(dev, dma_mask); + if (err) + goto err_free; + } + + if (c->slot) { + if (c->slot->chip) { + host->ops = c->slot->chip->ops; + host->quirks |= c->slot->chip->quirks; + host->quirks2 |= c->slot->chip->quirks2; + host->mmc->caps |= c->slot->chip->caps; + host->mmc->caps2 |= c->slot->chip->caps2; + host->mmc->pm_caps |= c->slot->chip->pm_caps; + } + host->quirks |= c->slot->quirks; + host->quirks2 |= c->slot->quirks2; + host->mmc->caps |= c->slot->caps; + host->mmc->caps2 |= c->slot->caps2; + host->mmc->pm_caps |= c->slot->pm_caps; + } + + host->mmc->caps2 |= MMC_CAP2_NO_PRESCAN_POWERUP; + + if (sdhci_acpi_flag(c, SDHCI_ACPI_SD_CD)) { + bool v = sdhci_acpi_flag(c, SDHCI_ACPI_SD_CD_OVERRIDE_LEVEL); + + if (mmc_gpiod_request_cd(host->mmc, NULL, 0, v, 0)) { + dev_warn(dev, "failed to setup card detect gpio\n"); + c->use_runtime_pm = false; + } + } + + err = sdhci_add_host(host); + if (err) + goto err_free; + + if (c->use_runtime_pm) { + pm_runtime_set_active(dev); + pm_suspend_ignore_children(dev, 1); + pm_runtime_set_autosuspend_delay(dev, 50); + pm_runtime_use_autosuspend(dev); + pm_runtime_enable(dev); + } + + return 0; + +err_free: + sdhci_free_host(c->host); + return err; +} + +static int sdhci_acpi_remove(struct platform_device *pdev) +{ + struct sdhci_acpi_host *c = platform_get_drvdata(pdev); + struct device *dev = &pdev->dev; + int dead; + + if (c->use_runtime_pm) { + pm_runtime_get_sync(dev); + pm_runtime_disable(dev); + pm_runtime_put_noidle(dev); + } + + dead = (sdhci_readl(c->host, SDHCI_INT_STATUS) == ~0); + sdhci_remove_host(c->host, dead); + sdhci_free_host(c->host); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP + +static int sdhci_acpi_suspend(struct device *dev) +{ + struct sdhci_acpi_host *c = dev_get_drvdata(dev); + + return sdhci_suspend_host(c->host); +} + +static int sdhci_acpi_resume(struct device *dev) +{ + struct sdhci_acpi_host *c = dev_get_drvdata(dev); + + return sdhci_resume_host(c->host); +} + +#else + +#define sdhci_acpi_suspend NULL +#define sdhci_acpi_resume NULL + +#endif + +#ifdef CONFIG_PM_RUNTIME + +static int sdhci_acpi_runtime_suspend(struct device *dev) +{ + struct sdhci_acpi_host *c = dev_get_drvdata(dev); + + return sdhci_runtime_suspend_host(c->host); +} + +static int sdhci_acpi_runtime_resume(struct device *dev) +{ + struct sdhci_acpi_host *c = dev_get_drvdata(dev); + + return sdhci_runtime_resume_host(c->host); +} + +static int sdhci_acpi_runtime_idle(struct device *dev) +{ + return 0; +} + +#else + +#define sdhci_acpi_runtime_suspend NULL +#define sdhci_acpi_runtime_resume NULL +#define sdhci_acpi_runtime_idle NULL + +#endif + +static const struct dev_pm_ops sdhci_acpi_pm_ops = { + .suspend = sdhci_acpi_suspend, + .resume = sdhci_acpi_resume, + .runtime_suspend = sdhci_acpi_runtime_suspend, + .runtime_resume = sdhci_acpi_runtime_resume, + .runtime_idle = sdhci_acpi_runtime_idle, +}; + +static struct platform_driver sdhci_acpi_driver = { + .driver = { + .name = "sdhci-acpi", + .owner = THIS_MODULE, + .acpi_match_table = sdhci_acpi_ids, + .pm = &sdhci_acpi_pm_ops, + }, + .probe = sdhci_acpi_probe, + .remove = sdhci_acpi_remove, +}; + +module_platform_driver(sdhci_acpi_driver); + +MODULE_DESCRIPTION("Secure Digital Host Controller Interface ACPI driver"); +MODULE_AUTHOR("Adrian Hunter"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/sdhci-bcm-kona.c b/drivers/mmc/host/sdhci-bcm-kona.c new file mode 100644 index 00000000000..dd780c315a6 --- /dev/null +++ b/drivers/mmc/host/sdhci-bcm-kona.c @@ -0,0 +1,373 @@ +/* + * Copyright (C) 2013 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/highmem.h> +#include <linux/platform_device.h> +#include <linux/mmc/host.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/clk.h> +#include <linux/regulator/consumer.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> +#include <linux/mmc/slot-gpio.h> + +#include "sdhci-pltfm.h" +#include "sdhci.h" + +#define SDHCI_SOFT_RESET 0x01000000 +#define KONA_SDHOST_CORECTRL 0x8000 +#define KONA_SDHOST_CD_PINCTRL 0x00000008 +#define KONA_SDHOST_STOP_HCLK 0x00000004 +#define KONA_SDHOST_RESET 0x00000002 +#define KONA_SDHOST_EN 0x00000001 + +#define KONA_SDHOST_CORESTAT 0x8004 +#define KONA_SDHOST_WP 0x00000002 +#define KONA_SDHOST_CD_SW 0x00000001 + +#define KONA_SDHOST_COREIMR 0x8008 +#define KONA_SDHOST_IP 0x00000001 + +#define KONA_SDHOST_COREISR 0x800C +#define KONA_SDHOST_COREIMSR 0x8010 +#define KONA_SDHOST_COREDBG1 0x8014 +#define KONA_SDHOST_COREGPO_MASK 0x8018 + +#define SD_DETECT_GPIO_DEBOUNCE_128MS 128 + +#define KONA_MMC_AUTOSUSPEND_DELAY (50) + +struct sdhci_bcm_kona_dev { + struct mutex write_lock; /* protect back to back writes */ + struct clk *external_clk; +}; + + +static int sdhci_bcm_kona_sd_reset(struct sdhci_host *host) +{ + unsigned int val; + unsigned long timeout; + + /* This timeout should be sufficent for core to reset */ + timeout = jiffies + msecs_to_jiffies(100); + + /* reset the host using the top level reset */ + val = sdhci_readl(host, KONA_SDHOST_CORECTRL); + val |= KONA_SDHOST_RESET; + sdhci_writel(host, val, KONA_SDHOST_CORECTRL); + + while (!(sdhci_readl(host, KONA_SDHOST_CORECTRL) & KONA_SDHOST_RESET)) { + if (time_is_before_jiffies(timeout)) { + pr_err("Error: sd host is stuck in reset!!!\n"); + return -EFAULT; + } + } + + /* bring the host out of reset */ + val = sdhci_readl(host, KONA_SDHOST_CORECTRL); + val &= ~KONA_SDHOST_RESET; + + /* + * Back-to-Back register write needs a delay of 1ms at bootup (min 10uS) + * Back-to-Back writes to same register needs delay when SD bus clock + * is very low w.r.t AHB clock, mainly during boot-time and during card + * insert-removal. + */ + usleep_range(1000, 5000); + sdhci_writel(host, val, KONA_SDHOST_CORECTRL); + + return 0; +} + +static void sdhci_bcm_kona_sd_init(struct sdhci_host *host) +{ + unsigned int val; + + /* enable the interrupt from the IP core */ + val = sdhci_readl(host, KONA_SDHOST_COREIMR); + val |= KONA_SDHOST_IP; + sdhci_writel(host, val, KONA_SDHOST_COREIMR); + + /* Enable the AHB clock gating module to the host */ + val = sdhci_readl(host, KONA_SDHOST_CORECTRL); + val |= KONA_SDHOST_EN; + + /* + * Back-to-Back register write needs a delay of 1ms at bootup (min 10uS) + * Back-to-Back writes to same register needs delay when SD bus clock + * is very low w.r.t AHB clock, mainly during boot-time and during card + * insert-removal. + */ + usleep_range(1000, 5000); + sdhci_writel(host, val, KONA_SDHOST_CORECTRL); +} + +/* + * Software emulation of the SD card insertion/removal. Set insert=1 for insert + * and insert=0 for removal. The card detection is done by GPIO. For Broadcom + * IP to function properly the bit 0 of CORESTAT register needs to be set/reset + * to generate the CD IRQ handled in sdhci.c which schedules card_tasklet. + */ +static int sdhci_bcm_kona_sd_card_emulate(struct sdhci_host *host, int insert) +{ + struct sdhci_pltfm_host *pltfm_priv = sdhci_priv(host); + struct sdhci_bcm_kona_dev *kona_dev = sdhci_pltfm_priv(pltfm_priv); + u32 val; + + /* + * Back-to-Back register write needs a delay of min 10uS. + * Back-to-Back writes to same register needs delay when SD bus clock + * is very low w.r.t AHB clock, mainly during boot-time and during card + * insert-removal. + * We keep 20uS + */ + mutex_lock(&kona_dev->write_lock); + udelay(20); + val = sdhci_readl(host, KONA_SDHOST_CORESTAT); + + if (insert) { + int ret; + + ret = mmc_gpio_get_ro(host->mmc); + if (ret >= 0) + val = (val & ~KONA_SDHOST_WP) | + ((ret) ? KONA_SDHOST_WP : 0); + + val |= KONA_SDHOST_CD_SW; + sdhci_writel(host, val, KONA_SDHOST_CORESTAT); + } else { + val &= ~KONA_SDHOST_CD_SW; + sdhci_writel(host, val, KONA_SDHOST_CORESTAT); + } + mutex_unlock(&kona_dev->write_lock); + + return 0; +} + +/* + * SD card interrupt event callback + */ +static void sdhci_bcm_kona_card_event(struct sdhci_host *host) +{ + if (mmc_gpio_get_cd(host->mmc) > 0) { + dev_dbg(mmc_dev(host->mmc), + "card inserted\n"); + sdhci_bcm_kona_sd_card_emulate(host, 1); + } else { + dev_dbg(mmc_dev(host->mmc), + "card removed\n"); + sdhci_bcm_kona_sd_card_emulate(host, 0); + } +} + +/* + * Get the base clock. Use central clock source for now. Not sure if different + * clock speed to each dev is allowed + */ +static unsigned int sdhci_bcm_kona_get_max_clk(struct sdhci_host *host) +{ + struct sdhci_bcm_kona_dev *kona_dev; + struct sdhci_pltfm_host *pltfm_priv = sdhci_priv(host); + kona_dev = sdhci_pltfm_priv(pltfm_priv); + + return host->mmc->f_max; +} + +static unsigned int sdhci_bcm_kona_get_timeout_clock(struct sdhci_host *host) +{ + return sdhci_bcm_kona_get_max_clk(host); +} + +static void sdhci_bcm_kona_init_74_clocks(struct sdhci_host *host, + u8 power_mode) +{ + /* + * JEDEC and SD spec specify supplying 74 continuous clocks to + * device after power up. With minimum bus (100KHz) that + * that translates to 740us + */ + if (power_mode != MMC_POWER_OFF) + udelay(740); +} + +static struct sdhci_ops sdhci_bcm_kona_ops = { + .set_clock = sdhci_set_clock, + .get_max_clock = sdhci_bcm_kona_get_max_clk, + .get_timeout_clock = sdhci_bcm_kona_get_timeout_clock, + .platform_send_init_74_clocks = sdhci_bcm_kona_init_74_clocks, + .set_bus_width = sdhci_set_bus_width, + .reset = sdhci_reset, + .set_uhs_signaling = sdhci_set_uhs_signaling, + .card_event = sdhci_bcm_kona_card_event, +}; + +static struct sdhci_pltfm_data sdhci_pltfm_data_kona = { + .ops = &sdhci_bcm_kona_ops, + .quirks = SDHCI_QUIRK_NO_CARD_NO_RESET | + SDHCI_QUIRK_BROKEN_TIMEOUT_VAL | SDHCI_QUIRK_32BIT_DMA_ADDR | + SDHCI_QUIRK_32BIT_DMA_SIZE | SDHCI_QUIRK_32BIT_ADMA_SIZE | + SDHCI_QUIRK_FORCE_BLK_SZ_2048 | + SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, +}; + +static struct __initconst of_device_id sdhci_bcm_kona_of_match[] = { + { .compatible = "brcm,kona-sdhci"}, + { .compatible = "bcm,kona-sdhci"}, /* deprecated name */ + {} +}; +MODULE_DEVICE_TABLE(of, sdhci_bcm_kona_of_match); + +static int sdhci_bcm_kona_probe(struct platform_device *pdev) +{ + struct sdhci_bcm_kona_dev *kona_dev = NULL; + struct sdhci_pltfm_host *pltfm_priv; + struct device *dev = &pdev->dev; + struct sdhci_host *host; + int ret; + + ret = 0; + + host = sdhci_pltfm_init(pdev, &sdhci_pltfm_data_kona, + sizeof(*kona_dev)); + if (IS_ERR(host)) + return PTR_ERR(host); + + dev_dbg(dev, "%s: inited. IOADDR=%p\n", __func__, host->ioaddr); + + pltfm_priv = sdhci_priv(host); + + kona_dev = sdhci_pltfm_priv(pltfm_priv); + mutex_init(&kona_dev->write_lock); + + mmc_of_parse(host->mmc); + + if (!host->mmc->f_max) { + dev_err(&pdev->dev, "Missing max-freq for SDHCI cfg\n"); + ret = -ENXIO; + goto err_pltfm_free; + } + + /* Get and enable the external clock */ + kona_dev->external_clk = devm_clk_get(dev, NULL); + if (IS_ERR(kona_dev->external_clk)) { + dev_err(dev, "Failed to get external clock\n"); + ret = PTR_ERR(kona_dev->external_clk); + goto err_pltfm_free; + } + + if (clk_set_rate(kona_dev->external_clk, host->mmc->f_max) != 0) { + dev_err(dev, "Failed to set rate external clock\n"); + goto err_pltfm_free; + } + + if (clk_prepare_enable(kona_dev->external_clk) != 0) { + dev_err(dev, "Failed to enable external clock\n"); + goto err_pltfm_free; + } + + dev_dbg(dev, "non-removable=%c\n", + (host->mmc->caps & MMC_CAP_NONREMOVABLE) ? 'Y' : 'N'); + dev_dbg(dev, "cd_gpio %c, wp_gpio %c\n", + (mmc_gpio_get_cd(host->mmc) != -ENOSYS) ? 'Y' : 'N', + (mmc_gpio_get_ro(host->mmc) != -ENOSYS) ? 'Y' : 'N'); + + if (host->mmc->caps & MMC_CAP_NONREMOVABLE) + host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION; + + dev_dbg(dev, "is_8bit=%c\n", + (host->mmc->caps | MMC_CAP_8_BIT_DATA) ? 'Y' : 'N'); + + ret = sdhci_bcm_kona_sd_reset(host); + if (ret) + goto err_clk_disable; + + sdhci_bcm_kona_sd_init(host); + + ret = sdhci_add_host(host); + if (ret) { + dev_err(dev, "Failed sdhci_add_host\n"); + goto err_reset; + } + + /* if device is eMMC, emulate card insert right here */ + if (host->mmc->caps & MMC_CAP_NONREMOVABLE) { + ret = sdhci_bcm_kona_sd_card_emulate(host, 1); + if (ret) { + dev_err(dev, + "unable to emulate card insertion\n"); + goto err_remove_host; + } + } + /* + * Since the card detection GPIO interrupt is configured to be + * edge sensitive, check the initial GPIO value here, emulate + * only if the card is present + */ + if (mmc_gpio_get_cd(host->mmc) > 0) + sdhci_bcm_kona_sd_card_emulate(host, 1); + + dev_dbg(dev, "initialized properly\n"); + return 0; + +err_remove_host: + sdhci_remove_host(host, 0); + +err_reset: + sdhci_bcm_kona_sd_reset(host); + +err_clk_disable: + clk_disable_unprepare(kona_dev->external_clk); + +err_pltfm_free: + sdhci_pltfm_free(pdev); + + dev_err(dev, "Probing of sdhci-pltfm failed: %d\n", ret); + return ret; +} + +static int sdhci_bcm_kona_remove(struct platform_device *pdev) +{ + struct sdhci_host *host = platform_get_drvdata(pdev); + struct sdhci_pltfm_host *pltfm_priv = sdhci_priv(host); + struct sdhci_bcm_kona_dev *kona_dev = sdhci_pltfm_priv(pltfm_priv); + int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff); + + sdhci_remove_host(host, dead); + + clk_disable_unprepare(kona_dev->external_clk); + + sdhci_pltfm_free(pdev); + + return 0; +} + +static struct platform_driver sdhci_bcm_kona_driver = { + .driver = { + .name = "sdhci-kona", + .owner = THIS_MODULE, + .pm = SDHCI_PLTFM_PMOPS, + .of_match_table = sdhci_bcm_kona_of_match, + }, + .probe = sdhci_bcm_kona_probe, + .remove = sdhci_bcm_kona_remove, +}; +module_platform_driver(sdhci_bcm_kona_driver); + +MODULE_DESCRIPTION("SDHCI driver for Broadcom Kona platform"); +MODULE_AUTHOR("Broadcom"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/sdhci-bcm2835.c b/drivers/mmc/host/sdhci-bcm2835.c new file mode 100644 index 00000000000..46af9a439d7 --- /dev/null +++ b/drivers/mmc/host/sdhci-bcm2835.c @@ -0,0 +1,208 @@ +/* + * BCM2835 SDHCI + * Copyright (C) 2012 Stephen Warren + * Based on U-Boot's MMC driver for the BCM2835 by Oleksandr Tymoshenko & me + * Portions of the code there were obviously based on the Linux kernel at: + * git://github.com/raspberrypi/linux.git rpi-3.6.y + * commit f5b930b "Main bcm2708 linux port" signed-off-by Dom Cobley. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/mmc/host.h> +#include "sdhci-pltfm.h" + +/* + * 400KHz is max freq for card ID etc. Use that as min card clock. We need to + * know the min to enable static calculation of max BCM2835_SDHCI_WRITE_DELAY. + */ +#define MIN_FREQ 400000 + +/* + * The Arasan has a bugette whereby it may lose the content of successive + * writes to registers that are within two SD-card clock cycles of each other + * (a clock domain crossing problem). It seems, however, that the data + * register does not have this problem, which is just as well - otherwise we'd + * have to nobble the DMA engine too. + * + * This should probably be dynamically calculated based on the actual card + * frequency. However, this is the longest we'll have to wait, and doesn't + * seem to slow access down too much, so the added complexity doesn't seem + * worth it for now. + * + * 1/MIN_FREQ is (max) time per tick of eMMC clock. + * 2/MIN_FREQ is time for two ticks. + * Multiply by 1000000 to get uS per two ticks. + * *1000000 for uSecs. + * +1 for hack rounding. + */ +#define BCM2835_SDHCI_WRITE_DELAY (((2 * 1000000) / MIN_FREQ) + 1) + +struct bcm2835_sdhci { + u32 shadow; +}; + +static void bcm2835_sdhci_writel(struct sdhci_host *host, u32 val, int reg) +{ + writel(val, host->ioaddr + reg); + + udelay(BCM2835_SDHCI_WRITE_DELAY); +} + +static inline u32 bcm2835_sdhci_readl(struct sdhci_host *host, int reg) +{ + u32 val = readl(host->ioaddr + reg); + + if (reg == SDHCI_CAPABILITIES) + val |= SDHCI_CAN_VDD_330; + + return val; +} + +static void bcm2835_sdhci_writew(struct sdhci_host *host, u16 val, int reg) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct bcm2835_sdhci *bcm2835_host = pltfm_host->priv; + u32 oldval = (reg == SDHCI_COMMAND) ? bcm2835_host->shadow : + bcm2835_sdhci_readl(host, reg & ~3); + u32 word_num = (reg >> 1) & 1; + u32 word_shift = word_num * 16; + u32 mask = 0xffff << word_shift; + u32 newval = (oldval & ~mask) | (val << word_shift); + + if (reg == SDHCI_TRANSFER_MODE) + bcm2835_host->shadow = newval; + else + bcm2835_sdhci_writel(host, newval, reg & ~3); +} + +static u16 bcm2835_sdhci_readw(struct sdhci_host *host, int reg) +{ + u32 val = bcm2835_sdhci_readl(host, (reg & ~3)); + u32 word_num = (reg >> 1) & 1; + u32 word_shift = word_num * 16; + u32 word = (val >> word_shift) & 0xffff; + + return word; +} + +static void bcm2835_sdhci_writeb(struct sdhci_host *host, u8 val, int reg) +{ + u32 oldval = bcm2835_sdhci_readl(host, reg & ~3); + u32 byte_num = reg & 3; + u32 byte_shift = byte_num * 8; + u32 mask = 0xff << byte_shift; + u32 newval = (oldval & ~mask) | (val << byte_shift); + + bcm2835_sdhci_writel(host, newval, reg & ~3); +} + +static u8 bcm2835_sdhci_readb(struct sdhci_host *host, int reg) +{ + u32 val = bcm2835_sdhci_readl(host, (reg & ~3)); + u32 byte_num = reg & 3; + u32 byte_shift = byte_num * 8; + u32 byte = (val >> byte_shift) & 0xff; + + return byte; +} + +static unsigned int bcm2835_sdhci_get_min_clock(struct sdhci_host *host) +{ + return MIN_FREQ; +} + +static const struct sdhci_ops bcm2835_sdhci_ops = { + .write_l = bcm2835_sdhci_writel, + .write_w = bcm2835_sdhci_writew, + .write_b = bcm2835_sdhci_writeb, + .read_l = bcm2835_sdhci_readl, + .read_w = bcm2835_sdhci_readw, + .read_b = bcm2835_sdhci_readb, + .set_clock = sdhci_set_clock, + .get_max_clock = sdhci_pltfm_clk_get_max_clock, + .get_min_clock = bcm2835_sdhci_get_min_clock, + .set_bus_width = sdhci_set_bus_width, + .reset = sdhci_reset, + .set_uhs_signaling = sdhci_set_uhs_signaling, +}; + +static const struct sdhci_pltfm_data bcm2835_sdhci_pdata = { + .quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION | + SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK, + .ops = &bcm2835_sdhci_ops, +}; + +static int bcm2835_sdhci_probe(struct platform_device *pdev) +{ + struct sdhci_host *host; + struct bcm2835_sdhci *bcm2835_host; + struct sdhci_pltfm_host *pltfm_host; + int ret; + + host = sdhci_pltfm_init(pdev, &bcm2835_sdhci_pdata, 0); + if (IS_ERR(host)) + return PTR_ERR(host); + + bcm2835_host = devm_kzalloc(&pdev->dev, sizeof(*bcm2835_host), + GFP_KERNEL); + if (!bcm2835_host) { + dev_err(mmc_dev(host->mmc), + "failed to allocate bcm2835_sdhci\n"); + return -ENOMEM; + } + + pltfm_host = sdhci_priv(host); + pltfm_host->priv = bcm2835_host; + + pltfm_host->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(pltfm_host->clk)) { + ret = PTR_ERR(pltfm_host->clk); + goto err; + } + + return sdhci_add_host(host); + +err: + sdhci_pltfm_free(pdev); + return ret; +} + +static int bcm2835_sdhci_remove(struct platform_device *pdev) +{ + return sdhci_pltfm_unregister(pdev); +} + +static const struct of_device_id bcm2835_sdhci_of_match[] = { + { .compatible = "brcm,bcm2835-sdhci" }, + { } +}; +MODULE_DEVICE_TABLE(of, bcm2835_sdhci_of_match); + +static struct platform_driver bcm2835_sdhci_driver = { + .driver = { + .name = "sdhci-bcm2835", + .owner = THIS_MODULE, + .of_match_table = bcm2835_sdhci_of_match, + .pm = SDHCI_PLTFM_PMOPS, + }, + .probe = bcm2835_sdhci_probe, + .remove = bcm2835_sdhci_remove, +}; +module_platform_driver(bcm2835_sdhci_driver); + +MODULE_DESCRIPTION("BCM2835 SDHCI driver"); +MODULE_AUTHOR("Stephen Warren"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/sdhci-cns3xxx.c b/drivers/mmc/host/sdhci-cns3xxx.c index 9ebd1d7759d..14b74075589 100644 --- a/drivers/mmc/host/sdhci-cns3xxx.c +++ b/drivers/mmc/host/sdhci-cns3xxx.c @@ -15,9 +15,7 @@ #include <linux/delay.h> #include <linux/device.h> #include <linux/mmc/host.h> -#include <linux/mmc/sdhci-pltfm.h> -#include <mach/cns3xxx.h> -#include "sdhci.h" +#include <linux/module.h> #include "sdhci-pltfm.h" static unsigned int sdhci_cns3xxx_get_max_clk(struct sdhci_host *host) @@ -32,13 +30,12 @@ static void sdhci_cns3xxx_set_clock(struct sdhci_host *host, unsigned int clock) u16 clk; unsigned long timeout; - if (clock == host->clock) - return; + host->mmc->actual_clock = 0; sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); if (clock == 0) - goto out; + return; while (host->max_clk / div > clock) { /* @@ -77,21 +74,48 @@ static void sdhci_cns3xxx_set_clock(struct sdhci_host *host, unsigned int clock) clk |= SDHCI_CLOCK_CARD_EN; sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); -out: - host->clock = clock; } -static struct sdhci_ops sdhci_cns3xxx_ops = { +static const struct sdhci_ops sdhci_cns3xxx_ops = { .get_max_clock = sdhci_cns3xxx_get_max_clk, .set_clock = sdhci_cns3xxx_set_clock, + .set_bus_width = sdhci_set_bus_width, + .reset = sdhci_reset, + .set_uhs_signaling = sdhci_set_uhs_signaling, }; -struct sdhci_pltfm_data sdhci_cns3xxx_pdata = { +static const struct sdhci_pltfm_data sdhci_cns3xxx_pdata = { .ops = &sdhci_cns3xxx_ops, .quirks = SDHCI_QUIRK_BROKEN_DMA | SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | SDHCI_QUIRK_INVERTED_WRITE_PROTECT | SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN | - SDHCI_QUIRK_BROKEN_TIMEOUT_VAL | - SDHCI_QUIRK_NONSTANDARD_CLOCK, + SDHCI_QUIRK_BROKEN_TIMEOUT_VAL, +}; + +static int sdhci_cns3xxx_probe(struct platform_device *pdev) +{ + return sdhci_pltfm_register(pdev, &sdhci_cns3xxx_pdata, 0); +} + +static int sdhci_cns3xxx_remove(struct platform_device *pdev) +{ + return sdhci_pltfm_unregister(pdev); +} + +static struct platform_driver sdhci_cns3xxx_driver = { + .driver = { + .name = "sdhci-cns3xxx", + .owner = THIS_MODULE, + .pm = SDHCI_PLTFM_PMOPS, + }, + .probe = sdhci_cns3xxx_probe, + .remove = sdhci_cns3xxx_remove, }; + +module_platform_driver(sdhci_cns3xxx_driver); + +MODULE_DESCRIPTION("SDHCI driver for CNS3xxx"); +MODULE_AUTHOR("Scott Shu, " + "Anton Vorontsov <avorontsov@mvista.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/sdhci-dove.c b/drivers/mmc/host/sdhci-dove.c new file mode 100644 index 00000000000..e6278ec007d --- /dev/null +++ b/drivers/mmc/host/sdhci-dove.c @@ -0,0 +1,162 @@ +/* + * sdhci-dove.c Support for SDHCI on Marvell's Dove SoC + * + * Author: Saeed Bishara <saeed@marvell.com> + * Mike Rapoport <mike@compulab.co.il> + * Based on sdhci-cns3xxx.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/mmc/host.h> +#include <linux/module.h> +#include <linux/of.h> + +#include "sdhci-pltfm.h" + +struct sdhci_dove_priv { + struct clk *clk; +}; + +static u16 sdhci_dove_readw(struct sdhci_host *host, int reg) +{ + u16 ret; + + switch (reg) { + case SDHCI_HOST_VERSION: + case SDHCI_SLOT_INT_STATUS: + /* those registers don't exist */ + return 0; + default: + ret = readw(host->ioaddr + reg); + } + return ret; +} + +static u32 sdhci_dove_readl(struct sdhci_host *host, int reg) +{ + u32 ret; + + ret = readl(host->ioaddr + reg); + + switch (reg) { + case SDHCI_CAPABILITIES: + /* Mask the support for 3.0V */ + ret &= ~SDHCI_CAN_VDD_300; + break; + } + return ret; +} + +static const struct sdhci_ops sdhci_dove_ops = { + .read_w = sdhci_dove_readw, + .read_l = sdhci_dove_readl, + .set_clock = sdhci_set_clock, + .set_bus_width = sdhci_set_bus_width, + .reset = sdhci_reset, + .set_uhs_signaling = sdhci_set_uhs_signaling, +}; + +static const struct sdhci_pltfm_data sdhci_dove_pdata = { + .ops = &sdhci_dove_ops, + .quirks = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER | + SDHCI_QUIRK_NO_BUSY_IRQ | + SDHCI_QUIRK_BROKEN_TIMEOUT_VAL | + SDHCI_QUIRK_FORCE_DMA | + SDHCI_QUIRK_NO_HISPD_BIT, +}; + +static int sdhci_dove_probe(struct platform_device *pdev) +{ + struct sdhci_host *host; + struct sdhci_pltfm_host *pltfm_host; + struct sdhci_dove_priv *priv; + int ret; + + priv = devm_kzalloc(&pdev->dev, sizeof(struct sdhci_dove_priv), + GFP_KERNEL); + if (!priv) { + dev_err(&pdev->dev, "unable to allocate private data"); + return -ENOMEM; + } + + priv->clk = devm_clk_get(&pdev->dev, NULL); + + host = sdhci_pltfm_init(pdev, &sdhci_dove_pdata, 0); + if (IS_ERR(host)) + return PTR_ERR(host); + + pltfm_host = sdhci_priv(host); + pltfm_host->priv = priv; + + if (!IS_ERR(priv->clk)) + clk_prepare_enable(priv->clk); + + ret = mmc_of_parse(host->mmc); + if (ret) + goto err_sdhci_add; + + ret = sdhci_add_host(host); + if (ret) + goto err_sdhci_add; + + return 0; + +err_sdhci_add: + if (!IS_ERR(priv->clk)) + clk_disable_unprepare(priv->clk); + sdhci_pltfm_free(pdev); + return ret; +} + +static int sdhci_dove_remove(struct platform_device *pdev) +{ + struct sdhci_host *host = platform_get_drvdata(pdev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_dove_priv *priv = pltfm_host->priv; + + sdhci_pltfm_unregister(pdev); + + if (!IS_ERR(priv->clk)) + clk_disable_unprepare(priv->clk); + + return 0; +} + +static const struct of_device_id sdhci_dove_of_match_table[] = { + { .compatible = "marvell,dove-sdhci", }, + {} +}; +MODULE_DEVICE_TABLE(of, sdhci_dove_of_match_table); + +static struct platform_driver sdhci_dove_driver = { + .driver = { + .name = "sdhci-dove", + .owner = THIS_MODULE, + .pm = SDHCI_PLTFM_PMOPS, + .of_match_table = sdhci_dove_of_match_table, + }, + .probe = sdhci_dove_probe, + .remove = sdhci_dove_remove, +}; + +module_platform_driver(sdhci_dove_driver); + +MODULE_DESCRIPTION("SDHCI driver for Dove"); +MODULE_AUTHOR("Saeed Bishara <saeed@marvell.com>, " + "Mike Rapoport <mike@compulab.co.il>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 2e9cca19c90..ccec0e32590 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -15,12 +15,201 @@ #include <linux/delay.h> #include <linux/err.h> #include <linux/clk.h> +#include <linux/gpio.h> +#include <linux/module.h> +#include <linux/slab.h> #include <linux/mmc/host.h> -#include <linux/mmc/sdhci-pltfm.h> -#include "sdhci.h" +#include <linux/mmc/mmc.h> +#include <linux/mmc/sdio.h> +#include <linux/mmc/slot-gpio.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> +#include <linux/pinctrl/consumer.h> +#include <linux/platform_data/mmc-esdhc-imx.h> +#include <linux/pm_runtime.h> #include "sdhci-pltfm.h" #include "sdhci-esdhc.h" +#define ESDHC_CTRL_D3CD 0x08 +/* VENDOR SPEC register */ +#define ESDHC_VENDOR_SPEC 0xc0 +#define ESDHC_VENDOR_SPEC_SDIO_QUIRK (1 << 1) +#define ESDHC_VENDOR_SPEC_VSELECT (1 << 1) +#define ESDHC_VENDOR_SPEC_FRC_SDCLK_ON (1 << 8) +#define ESDHC_WTMK_LVL 0x44 +#define ESDHC_MIX_CTRL 0x48 +#define ESDHC_MIX_CTRL_DDREN (1 << 3) +#define ESDHC_MIX_CTRL_AC23EN (1 << 7) +#define ESDHC_MIX_CTRL_EXE_TUNE (1 << 22) +#define ESDHC_MIX_CTRL_SMPCLK_SEL (1 << 23) +#define ESDHC_MIX_CTRL_FBCLK_SEL (1 << 25) +/* Bits 3 and 6 are not SDHCI standard definitions */ +#define ESDHC_MIX_CTRL_SDHCI_MASK 0xb7 +/* Tuning bits */ +#define ESDHC_MIX_CTRL_TUNING_MASK 0x03c00000 + +/* dll control register */ +#define ESDHC_DLL_CTRL 0x60 +#define ESDHC_DLL_OVERRIDE_VAL_SHIFT 9 +#define ESDHC_DLL_OVERRIDE_EN_SHIFT 8 + +/* tune control register */ +#define ESDHC_TUNE_CTRL_STATUS 0x68 +#define ESDHC_TUNE_CTRL_STEP 1 +#define ESDHC_TUNE_CTRL_MIN 0 +#define ESDHC_TUNE_CTRL_MAX ((1 << 7) - 1) + +#define ESDHC_TUNING_CTRL 0xcc +#define ESDHC_STD_TUNING_EN (1 << 24) +/* NOTE: the minimum valid tuning start tap for mx6sl is 1 */ +#define ESDHC_TUNING_START_TAP 0x1 + +#define ESDHC_TUNING_BLOCK_PATTERN_LEN 64 + +/* pinctrl state */ +#define ESDHC_PINCTRL_STATE_100MHZ "state_100mhz" +#define ESDHC_PINCTRL_STATE_200MHZ "state_200mhz" + +/* + * Our interpretation of the SDHCI_HOST_CONTROL register + */ +#define ESDHC_CTRL_4BITBUS (0x1 << 1) +#define ESDHC_CTRL_8BITBUS (0x2 << 1) +#define ESDHC_CTRL_BUSWIDTH_MASK (0x3 << 1) + +/* + * There is an INT DMA ERR mis-match between eSDHC and STD SDHC SPEC: + * Bit25 is used in STD SPEC, and is reserved in fsl eSDHC design, + * but bit28 is used as the INT DMA ERR in fsl eSDHC design. + * Define this macro DMA error INT for fsl eSDHC + */ +#define ESDHC_INT_VENDOR_SPEC_DMA_ERR (1 << 28) + +/* + * The CMDTYPE of the CMD register (offset 0xE) should be set to + * "11" when the STOP CMD12 is issued on imx53 to abort one + * open ended multi-blk IO. Otherwise the TC INT wouldn't + * be generated. + * In exact block transfer, the controller doesn't complete the + * operations automatically as required at the end of the + * transfer and remains on hold if the abort command is not sent. + * As a result, the TC flag is not asserted and SW received timeout + * exeception. Bit1 of Vendor Spec registor is used to fix it. + */ +#define ESDHC_FLAG_MULTIBLK_NO_INT BIT(1) +/* + * The flag enables the workaround for ESDHC errata ENGcm07207 which + * affects i.MX25 and i.MX35. + */ +#define ESDHC_FLAG_ENGCM07207 BIT(2) +/* + * The flag tells that the ESDHC controller is an USDHC block that is + * integrated on the i.MX6 series. + */ +#define ESDHC_FLAG_USDHC BIT(3) +/* The IP supports manual tuning process */ +#define ESDHC_FLAG_MAN_TUNING BIT(4) +/* The IP supports standard tuning process */ +#define ESDHC_FLAG_STD_TUNING BIT(5) +/* The IP has SDHCI_CAPABILITIES_1 register */ +#define ESDHC_FLAG_HAVE_CAP1 BIT(6) + +struct esdhc_soc_data { + u32 flags; +}; + +static struct esdhc_soc_data esdhc_imx25_data = { + .flags = ESDHC_FLAG_ENGCM07207, +}; + +static struct esdhc_soc_data esdhc_imx35_data = { + .flags = ESDHC_FLAG_ENGCM07207, +}; + +static struct esdhc_soc_data esdhc_imx51_data = { + .flags = 0, +}; + +static struct esdhc_soc_data esdhc_imx53_data = { + .flags = ESDHC_FLAG_MULTIBLK_NO_INT, +}; + +static struct esdhc_soc_data usdhc_imx6q_data = { + .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_MAN_TUNING, +}; + +static struct esdhc_soc_data usdhc_imx6sl_data = { + .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING + | ESDHC_FLAG_HAVE_CAP1, +}; + +struct pltfm_imx_data { + u32 scratchpad; + struct pinctrl *pinctrl; + struct pinctrl_state *pins_default; + struct pinctrl_state *pins_100mhz; + struct pinctrl_state *pins_200mhz; + const struct esdhc_soc_data *socdata; + struct esdhc_platform_data boarddata; + struct clk *clk_ipg; + struct clk *clk_ahb; + struct clk *clk_per; + enum { + NO_CMD_PENDING, /* no multiblock command pending*/ + MULTIBLK_IN_PROCESS, /* exact multiblock cmd in process */ + WAIT_FOR_INT, /* sent CMD12, waiting for response INT */ + } multiblock_status; + u32 is_ddr; +}; + +static struct platform_device_id imx_esdhc_devtype[] = { + { + .name = "sdhci-esdhc-imx25", + .driver_data = (kernel_ulong_t) &esdhc_imx25_data, + }, { + .name = "sdhci-esdhc-imx35", + .driver_data = (kernel_ulong_t) &esdhc_imx35_data, + }, { + .name = "sdhci-esdhc-imx51", + .driver_data = (kernel_ulong_t) &esdhc_imx51_data, + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(platform, imx_esdhc_devtype); + +static const struct of_device_id imx_esdhc_dt_ids[] = { + { .compatible = "fsl,imx25-esdhc", .data = &esdhc_imx25_data, }, + { .compatible = "fsl,imx35-esdhc", .data = &esdhc_imx35_data, }, + { .compatible = "fsl,imx51-esdhc", .data = &esdhc_imx51_data, }, + { .compatible = "fsl,imx53-esdhc", .data = &esdhc_imx53_data, }, + { .compatible = "fsl,imx6sl-usdhc", .data = &usdhc_imx6sl_data, }, + { .compatible = "fsl,imx6q-usdhc", .data = &usdhc_imx6q_data, }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, imx_esdhc_dt_ids); + +static inline int is_imx25_esdhc(struct pltfm_imx_data *data) +{ + return data->socdata == &esdhc_imx25_data; +} + +static inline int is_imx53_esdhc(struct pltfm_imx_data *data) +{ + return data->socdata == &esdhc_imx53_data; +} + +static inline int is_imx6q_usdhc(struct pltfm_imx_data *data) +{ + return data->socdata == &usdhc_imx6q_data; +} + +static inline int esdhc_is_usdhc(struct pltfm_imx_data *data) +{ + return !!(data->socdata->flags & ESDHC_FLAG_USDHC); +} + static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, int reg) { void __iomem *base = host->ioaddr + (reg & ~0x3); @@ -29,10 +218,189 @@ static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, i writel(((readl(base) & ~(mask << shift)) | (val << shift)), base); } +static u32 esdhc_readl_le(struct sdhci_host *host, int reg) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = pltfm_host->priv; + u32 val = readl(host->ioaddr + reg); + + if (unlikely(reg == SDHCI_PRESENT_STATE)) { + u32 fsl_prss = val; + /* save the least 20 bits */ + val = fsl_prss & 0x000FFFFF; + /* move dat[0-3] bits */ + val |= (fsl_prss & 0x0F000000) >> 4; + /* move cmd line bit */ + val |= (fsl_prss & 0x00800000) << 1; + } + + if (unlikely(reg == SDHCI_CAPABILITIES)) { + /* ignore bit[0-15] as it stores cap_1 register val for mx6sl */ + if (imx_data->socdata->flags & ESDHC_FLAG_HAVE_CAP1) + val &= 0xffff0000; + + /* In FSL esdhc IC module, only bit20 is used to indicate the + * ADMA2 capability of esdhc, but this bit is messed up on + * some SOCs (e.g. on MX25, MX35 this bit is set, but they + * don't actually support ADMA2). So set the BROKEN_ADMA + * uirk on MX25/35 platforms. + */ + + if (val & SDHCI_CAN_DO_ADMA1) { + val &= ~SDHCI_CAN_DO_ADMA1; + val |= SDHCI_CAN_DO_ADMA2; + } + } + + if (unlikely(reg == SDHCI_CAPABILITIES_1)) { + if (esdhc_is_usdhc(imx_data)) { + if (imx_data->socdata->flags & ESDHC_FLAG_HAVE_CAP1) + val = readl(host->ioaddr + SDHCI_CAPABILITIES) & 0xFFFF; + else + /* imx6q/dl does not have cap_1 register, fake one */ + val = SDHCI_SUPPORT_DDR50 | SDHCI_SUPPORT_SDR104 + | SDHCI_SUPPORT_SDR50 + | SDHCI_USE_SDR50_TUNING; + } + } + + if (unlikely(reg == SDHCI_MAX_CURRENT) && esdhc_is_usdhc(imx_data)) { + val = 0; + val |= 0xFF << SDHCI_MAX_CURRENT_330_SHIFT; + val |= 0xFF << SDHCI_MAX_CURRENT_300_SHIFT; + val |= 0xFF << SDHCI_MAX_CURRENT_180_SHIFT; + } + + if (unlikely(reg == SDHCI_INT_STATUS)) { + if (val & ESDHC_INT_VENDOR_SPEC_DMA_ERR) { + val &= ~ESDHC_INT_VENDOR_SPEC_DMA_ERR; + val |= SDHCI_INT_ADMA_ERROR; + } + + /* + * mask off the interrupt we get in response to the manually + * sent CMD12 + */ + if ((imx_data->multiblock_status == WAIT_FOR_INT) && + ((val & SDHCI_INT_RESPONSE) == SDHCI_INT_RESPONSE)) { + val &= ~SDHCI_INT_RESPONSE; + writel(SDHCI_INT_RESPONSE, host->ioaddr + + SDHCI_INT_STATUS); + imx_data->multiblock_status = NO_CMD_PENDING; + } + } + + return val; +} + +static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = pltfm_host->priv; + u32 data; + + if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)) { + if (val & SDHCI_INT_CARD_INT) { + /* + * Clear and then set D3CD bit to avoid missing the + * card interrupt. This is a eSDHC controller problem + * so we need to apply the following workaround: clear + * and set D3CD bit will make eSDHC re-sample the card + * interrupt. In case a card interrupt was lost, + * re-sample it by the following steps. + */ + data = readl(host->ioaddr + SDHCI_HOST_CONTROL); + data &= ~ESDHC_CTRL_D3CD; + writel(data, host->ioaddr + SDHCI_HOST_CONTROL); + data |= ESDHC_CTRL_D3CD; + writel(data, host->ioaddr + SDHCI_HOST_CONTROL); + } + } + + if (unlikely((imx_data->socdata->flags & ESDHC_FLAG_MULTIBLK_NO_INT) + && (reg == SDHCI_INT_STATUS) + && (val & SDHCI_INT_DATA_END))) { + u32 v; + v = readl(host->ioaddr + ESDHC_VENDOR_SPEC); + v &= ~ESDHC_VENDOR_SPEC_SDIO_QUIRK; + writel(v, host->ioaddr + ESDHC_VENDOR_SPEC); + + if (imx_data->multiblock_status == MULTIBLK_IN_PROCESS) + { + /* send a manual CMD12 with RESPTYP=none */ + data = MMC_STOP_TRANSMISSION << 24 | + SDHCI_CMD_ABORTCMD << 16; + writel(data, host->ioaddr + SDHCI_TRANSFER_MODE); + imx_data->multiblock_status = WAIT_FOR_INT; + } + } + + if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)) { + if (val & SDHCI_INT_ADMA_ERROR) { + val &= ~SDHCI_INT_ADMA_ERROR; + val |= ESDHC_INT_VENDOR_SPEC_DMA_ERR; + } + } + + writel(val, host->ioaddr + reg); +} + static u16 esdhc_readw_le(struct sdhci_host *host, int reg) { - if (unlikely(reg == SDHCI_HOST_VERSION)) + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = pltfm_host->priv; + u16 ret = 0; + u32 val; + + if (unlikely(reg == SDHCI_HOST_VERSION)) { reg ^= 2; + if (esdhc_is_usdhc(imx_data)) { + /* + * The usdhc register returns a wrong host version. + * Correct it here. + */ + return SDHCI_SPEC_300; + } + } + + if (unlikely(reg == SDHCI_HOST_CONTROL2)) { + val = readl(host->ioaddr + ESDHC_VENDOR_SPEC); + if (val & ESDHC_VENDOR_SPEC_VSELECT) + ret |= SDHCI_CTRL_VDD_180; + + if (esdhc_is_usdhc(imx_data)) { + if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING) + val = readl(host->ioaddr + ESDHC_MIX_CTRL); + else if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) + /* the std tuning bits is in ACMD12_ERR for imx6sl */ + val = readl(host->ioaddr + SDHCI_ACMD12_ERR); + } + + if (val & ESDHC_MIX_CTRL_EXE_TUNE) + ret |= SDHCI_CTRL_EXEC_TUNING; + if (val & ESDHC_MIX_CTRL_SMPCLK_SEL) + ret |= SDHCI_CTRL_TUNED_CLK; + + ret &= ~SDHCI_CTRL_PRESET_VAL_ENABLE; + + return ret; + } + + if (unlikely(reg == SDHCI_TRANSFER_MODE)) { + if (esdhc_is_usdhc(imx_data)) { + u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL); + ret = m & ESDHC_MIX_CTRL_SDHCI_MASK; + /* Swap AC23 bit */ + if (m & ESDHC_MIX_CTRL_AC23EN) { + ret &= ~ESDHC_MIX_CTRL_AC23EN; + ret |= SDHCI_TRNS_AUTO_CMD23; + } + } else { + ret = readw(host->ioaddr + SDHCI_TRANSFER_MODE); + } + + return ret; + } return readw(host->ioaddr + reg); } @@ -40,18 +408,95 @@ static u16 esdhc_readw_le(struct sdhci_host *host, int reg) static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = pltfm_host->priv; + u32 new_val = 0; switch (reg) { + case SDHCI_CLOCK_CONTROL: + new_val = readl(host->ioaddr + ESDHC_VENDOR_SPEC); + if (val & SDHCI_CLOCK_CARD_EN) + new_val |= ESDHC_VENDOR_SPEC_FRC_SDCLK_ON; + else + new_val &= ~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON; + writel(new_val, host->ioaddr + ESDHC_VENDOR_SPEC); + return; + case SDHCI_HOST_CONTROL2: + new_val = readl(host->ioaddr + ESDHC_VENDOR_SPEC); + if (val & SDHCI_CTRL_VDD_180) + new_val |= ESDHC_VENDOR_SPEC_VSELECT; + else + new_val &= ~ESDHC_VENDOR_SPEC_VSELECT; + writel(new_val, host->ioaddr + ESDHC_VENDOR_SPEC); + if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING) { + new_val = readl(host->ioaddr + ESDHC_MIX_CTRL); + if (val & SDHCI_CTRL_TUNED_CLK) + new_val |= ESDHC_MIX_CTRL_SMPCLK_SEL; + else + new_val &= ~ESDHC_MIX_CTRL_SMPCLK_SEL; + writel(new_val , host->ioaddr + ESDHC_MIX_CTRL); + } else if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) { + u32 v = readl(host->ioaddr + SDHCI_ACMD12_ERR); + u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL); + if (val & SDHCI_CTRL_TUNED_CLK) { + v |= ESDHC_MIX_CTRL_SMPCLK_SEL; + } else { + v &= ~ESDHC_MIX_CTRL_SMPCLK_SEL; + m &= ~ESDHC_MIX_CTRL_FBCLK_SEL; + } + + if (val & SDHCI_CTRL_EXEC_TUNING) { + v |= ESDHC_MIX_CTRL_EXE_TUNE; + m |= ESDHC_MIX_CTRL_FBCLK_SEL; + } else { + v &= ~ESDHC_MIX_CTRL_EXE_TUNE; + } + + writel(v, host->ioaddr + SDHCI_ACMD12_ERR); + writel(m, host->ioaddr + ESDHC_MIX_CTRL); + } + return; case SDHCI_TRANSFER_MODE: - /* - * Postpone this write, we must do it together with a - * command write that is down below. - */ - pltfm_host->scratchpad = val; + if ((imx_data->socdata->flags & ESDHC_FLAG_MULTIBLK_NO_INT) + && (host->cmd->opcode == SD_IO_RW_EXTENDED) + && (host->cmd->data->blocks > 1) + && (host->cmd->data->flags & MMC_DATA_READ)) { + u32 v; + v = readl(host->ioaddr + ESDHC_VENDOR_SPEC); + v |= ESDHC_VENDOR_SPEC_SDIO_QUIRK; + writel(v, host->ioaddr + ESDHC_VENDOR_SPEC); + } + + if (esdhc_is_usdhc(imx_data)) { + u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL); + /* Swap AC23 bit */ + if (val & SDHCI_TRNS_AUTO_CMD23) { + val &= ~SDHCI_TRNS_AUTO_CMD23; + val |= ESDHC_MIX_CTRL_AC23EN; + } + m = val | (m & ~ESDHC_MIX_CTRL_SDHCI_MASK); + writel(m, host->ioaddr + ESDHC_MIX_CTRL); + } else { + /* + * Postpone this write, we must do it together with a + * command write that is down below. + */ + imx_data->scratchpad = val; + } return; case SDHCI_COMMAND: - writel(val << 16 | pltfm_host->scratchpad, - host->ioaddr + SDHCI_TRANSFER_MODE); + if (host->cmd->opcode == MMC_STOP_TRANSMISSION) + val |= SDHCI_CMD_ABORTCMD; + + if ((host->cmd->opcode == MMC_SET_BLOCK_COUNT) && + (imx_data->socdata->flags & ESDHC_FLAG_MULTIBLK_NO_INT)) + imx_data->multiblock_status = MULTIBLK_IN_PROCESS; + + if (esdhc_is_usdhc(imx_data)) + writel(val << 16, + host->ioaddr + SDHCI_TRANSFER_MODE); + else + writel(val << 16 | imx_data->scratchpad, + host->ioaddr + SDHCI_TRANSFER_MODE); return; case SDHCI_BLOCK_SIZE: val &= ~SDHCI_MAKE_BLKSZ(0x7, 0); @@ -62,7 +507,10 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg) { + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = pltfm_host->priv; u32 new_val; + u32 mask; switch (reg) { case SDHCI_POWER_CONTROL: @@ -72,72 +520,704 @@ static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg) */ return; case SDHCI_HOST_CONTROL: - /* FSL messed up here, so we can just keep those two */ - new_val = val & (SDHCI_CTRL_LED | SDHCI_CTRL_4BITBUS); - /* ensure the endianess */ + /* FSL messed up here, so we need to manually compose it. */ + new_val = val & SDHCI_CTRL_LED; + /* ensure the endianness */ new_val |= ESDHC_HOST_CONTROL_LE; - /* DMA mode bits are shifted */ - new_val |= (val & SDHCI_CTRL_DMA_MASK) << 5; + /* bits 8&9 are reserved on mx25 */ + if (!is_imx25_esdhc(imx_data)) { + /* DMA mode bits are shifted */ + new_val |= (val & SDHCI_CTRL_DMA_MASK) << 5; + } - esdhc_clrset_le(host, 0xffff, new_val, reg); + /* + * Do not touch buswidth bits here. This is done in + * esdhc_pltfm_bus_width. + * Do not touch the D3CD bit either which is used for the + * SDIO interrupt errata workaround. + */ + mask = 0xffff & ~(ESDHC_CTRL_BUSWIDTH_MASK | ESDHC_CTRL_D3CD); + + esdhc_clrset_le(host, mask, new_val, reg); return; } esdhc_clrset_le(host, 0xff, val, reg); + + /* + * The esdhc has a design violation to SDHC spec which tells + * that software reset should not affect card detection circuit. + * But esdhc clears its SYSCTL register bits [0..2] during the + * software reset. This will stop those clocks that card detection + * circuit relies on. To work around it, we turn the clocks on back + * to keep card detection circuit functional. + */ + if ((reg == SDHCI_SOFTWARE_RESET) && (val & 1)) { + esdhc_clrset_le(host, 0x7, 0x7, ESDHC_SYSTEM_CONTROL); + /* + * The reset on usdhc fails to clear MIX_CTRL register. + * Do it manually here. + */ + if (esdhc_is_usdhc(imx_data)) { + /* the tuning bits should be kept during reset */ + new_val = readl(host->ioaddr + ESDHC_MIX_CTRL); + writel(new_val & ESDHC_MIX_CTRL_TUNING_MASK, + host->ioaddr + ESDHC_MIX_CTRL); + imx_data->is_ddr = 0; + } + } } static unsigned int esdhc_pltfm_get_max_clock(struct sdhci_host *host) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = pltfm_host->priv; + struct esdhc_platform_data *boarddata = &imx_data->boarddata; - return clk_get_rate(pltfm_host->clk); + if (boarddata->f_max && (boarddata->f_max < pltfm_host->clock)) + return boarddata->f_max; + else + return pltfm_host->clock; } static unsigned int esdhc_pltfm_get_min_clock(struct sdhci_host *host) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); - return clk_get_rate(pltfm_host->clk) / 256 / 16; + return pltfm_host->clock / 256 / 16; } -static int esdhc_pltfm_init(struct sdhci_host *host, struct sdhci_pltfm_data *pdata) +static inline void esdhc_pltfm_set_clock(struct sdhci_host *host, + unsigned int clock) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); - struct clk *clk; + struct pltfm_imx_data *imx_data = pltfm_host->priv; + unsigned int host_clock = pltfm_host->clock; + int pre_div = 2; + int div = 1; + u32 temp, val; + + if (clock == 0) { + host->mmc->actual_clock = 0; - clk = clk_get(mmc_dev(host->mmc), NULL); - if (IS_ERR(clk)) { - dev_err(mmc_dev(host->mmc), "clk err\n"); - return PTR_ERR(clk); + if (esdhc_is_usdhc(imx_data)) { + val = readl(host->ioaddr + ESDHC_VENDOR_SPEC); + writel(val & ~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON, + host->ioaddr + ESDHC_VENDOR_SPEC); + } + return; } - clk_enable(clk); - pltfm_host->clk = clk; + + if (esdhc_is_usdhc(imx_data) && !imx_data->is_ddr) + pre_div = 1; + + temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL); + temp &= ~(ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN + | ESDHC_CLOCK_MASK); + sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL); + + while (host_clock / pre_div / 16 > clock && pre_div < 256) + pre_div *= 2; + + while (host_clock / pre_div / div > clock && div < 16) + div++; + + host->mmc->actual_clock = host_clock / pre_div / div; + dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n", + clock, host->mmc->actual_clock); + + if (imx_data->is_ddr) + pre_div >>= 2; + else + pre_div >>= 1; + div--; + + temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL); + temp |= (ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN + | (div << ESDHC_DIVIDER_SHIFT) + | (pre_div << ESDHC_PREDIV_SHIFT)); + sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL); + + if (esdhc_is_usdhc(imx_data)) { + val = readl(host->ioaddr + ESDHC_VENDOR_SPEC); + writel(val | ESDHC_VENDOR_SPEC_FRC_SDCLK_ON, + host->ioaddr + ESDHC_VENDOR_SPEC); + } + + mdelay(1); +} + +static unsigned int esdhc_pltfm_get_ro(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = pltfm_host->priv; + struct esdhc_platform_data *boarddata = &imx_data->boarddata; + + switch (boarddata->wp_type) { + case ESDHC_WP_GPIO: + return mmc_gpio_get_ro(host->mmc); + case ESDHC_WP_CONTROLLER: + return !(readl(host->ioaddr + SDHCI_PRESENT_STATE) & + SDHCI_WRITE_PROTECT); + case ESDHC_WP_NONE: + break; + } + + return -ENOSYS; +} + +static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width) +{ + u32 ctrl; + + switch (width) { + case MMC_BUS_WIDTH_8: + ctrl = ESDHC_CTRL_8BITBUS; + break; + case MMC_BUS_WIDTH_4: + ctrl = ESDHC_CTRL_4BITBUS; + break; + default: + ctrl = 0; + break; + } + + esdhc_clrset_le(host, ESDHC_CTRL_BUSWIDTH_MASK, ctrl, + SDHCI_HOST_CONTROL); +} + +static void esdhc_prepare_tuning(struct sdhci_host *host, u32 val) +{ + u32 reg; + + /* FIXME: delay a bit for card to be ready for next tuning due to errors */ + mdelay(1); + + /* This is balanced by the runtime put in sdhci_tasklet_finish */ + pm_runtime_get_sync(host->mmc->parent); + reg = readl(host->ioaddr + ESDHC_MIX_CTRL); + reg |= ESDHC_MIX_CTRL_EXE_TUNE | ESDHC_MIX_CTRL_SMPCLK_SEL | + ESDHC_MIX_CTRL_FBCLK_SEL; + writel(reg, host->ioaddr + ESDHC_MIX_CTRL); + writel(val << 8, host->ioaddr + ESDHC_TUNE_CTRL_STATUS); + dev_dbg(mmc_dev(host->mmc), + "tunning with delay 0x%x ESDHC_TUNE_CTRL_STATUS 0x%x\n", + val, readl(host->ioaddr + ESDHC_TUNE_CTRL_STATUS)); +} + +static void esdhc_request_done(struct mmc_request *mrq) +{ + complete(&mrq->completion); +} + +static int esdhc_send_tuning_cmd(struct sdhci_host *host, u32 opcode, + struct scatterlist *sg) +{ + struct mmc_command cmd = {0}; + struct mmc_request mrq = {NULL}; + struct mmc_data data = {0}; + + cmd.opcode = opcode; + cmd.arg = 0; + cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; + + data.blksz = ESDHC_TUNING_BLOCK_PATTERN_LEN; + data.blocks = 1; + data.flags = MMC_DATA_READ; + data.sg = sg; + data.sg_len = 1; + + mrq.cmd = &cmd; + mrq.cmd->mrq = &mrq; + mrq.data = &data; + mrq.data->mrq = &mrq; + mrq.cmd->data = mrq.data; + + mrq.done = esdhc_request_done; + init_completion(&(mrq.completion)); + + spin_lock_irq(&host->lock); + host->mrq = &mrq; + + sdhci_send_command(host, mrq.cmd); + + spin_unlock_irq(&host->lock); + + wait_for_completion(&mrq.completion); + + if (cmd.error) + return cmd.error; + if (data.error) + return data.error; return 0; } -static void esdhc_pltfm_exit(struct sdhci_host *host) +static void esdhc_post_tuning(struct sdhci_host *host) +{ + u32 reg; + + reg = readl(host->ioaddr + ESDHC_MIX_CTRL); + reg &= ~ESDHC_MIX_CTRL_EXE_TUNE; + writel(reg, host->ioaddr + ESDHC_MIX_CTRL); +} + +static int esdhc_executing_tuning(struct sdhci_host *host, u32 opcode) +{ + struct scatterlist sg; + char *tuning_pattern; + int min, max, avg, ret; + + tuning_pattern = kmalloc(ESDHC_TUNING_BLOCK_PATTERN_LEN, GFP_KERNEL); + if (!tuning_pattern) + return -ENOMEM; + + sg_init_one(&sg, tuning_pattern, ESDHC_TUNING_BLOCK_PATTERN_LEN); + + /* find the mininum delay first which can pass tuning */ + min = ESDHC_TUNE_CTRL_MIN; + while (min < ESDHC_TUNE_CTRL_MAX) { + esdhc_prepare_tuning(host, min); + if (!esdhc_send_tuning_cmd(host, opcode, &sg)) + break; + min += ESDHC_TUNE_CTRL_STEP; + } + + /* find the maxinum delay which can not pass tuning */ + max = min + ESDHC_TUNE_CTRL_STEP; + while (max < ESDHC_TUNE_CTRL_MAX) { + esdhc_prepare_tuning(host, max); + if (esdhc_send_tuning_cmd(host, opcode, &sg)) { + max -= ESDHC_TUNE_CTRL_STEP; + break; + } + max += ESDHC_TUNE_CTRL_STEP; + } + + /* use average delay to get the best timing */ + avg = (min + max) / 2; + esdhc_prepare_tuning(host, avg); + ret = esdhc_send_tuning_cmd(host, opcode, &sg); + esdhc_post_tuning(host); + + kfree(tuning_pattern); + + dev_dbg(mmc_dev(host->mmc), "tunning %s at 0x%x ret %d\n", + ret ? "failed" : "passed", avg, ret); + + return ret; +} + +static int esdhc_change_pinstate(struct sdhci_host *host, + unsigned int uhs) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = pltfm_host->priv; + struct pinctrl_state *pinctrl; + + dev_dbg(mmc_dev(host->mmc), "change pinctrl state for uhs %d\n", uhs); + + if (IS_ERR(imx_data->pinctrl) || + IS_ERR(imx_data->pins_default) || + IS_ERR(imx_data->pins_100mhz) || + IS_ERR(imx_data->pins_200mhz)) + return -EINVAL; + + switch (uhs) { + case MMC_TIMING_UHS_SDR50: + pinctrl = imx_data->pins_100mhz; + break; + case MMC_TIMING_UHS_SDR104: + case MMC_TIMING_MMC_HS200: + pinctrl = imx_data->pins_200mhz; + break; + default: + /* back to default state for other legacy timing */ + pinctrl = imx_data->pins_default; + } + + return pinctrl_select_state(imx_data->pinctrl, pinctrl); +} + +static void esdhc_set_uhs_signaling(struct sdhci_host *host, unsigned timing) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = pltfm_host->priv; + struct esdhc_platform_data *boarddata = &imx_data->boarddata; - clk_disable(pltfm_host->clk); - clk_put(pltfm_host->clk); + switch (timing) { + case MMC_TIMING_UHS_SDR12: + case MMC_TIMING_UHS_SDR25: + case MMC_TIMING_UHS_SDR50: + case MMC_TIMING_UHS_SDR104: + case MMC_TIMING_MMC_HS200: + break; + case MMC_TIMING_UHS_DDR50: + case MMC_TIMING_MMC_DDR52: + writel(readl(host->ioaddr + ESDHC_MIX_CTRL) | + ESDHC_MIX_CTRL_DDREN, + host->ioaddr + ESDHC_MIX_CTRL); + imx_data->is_ddr = 1; + if (boarddata->delay_line) { + u32 v; + v = boarddata->delay_line << + ESDHC_DLL_OVERRIDE_VAL_SHIFT | + (1 << ESDHC_DLL_OVERRIDE_EN_SHIFT); + if (is_imx53_esdhc(imx_data)) + v <<= 1; + writel(v, host->ioaddr + ESDHC_DLL_CTRL); + } + break; + } + + esdhc_change_pinstate(host, timing); +} + +static void esdhc_reset(struct sdhci_host *host, u8 mask) +{ + sdhci_reset(host, mask); + + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); } static struct sdhci_ops sdhci_esdhc_ops = { + .read_l = esdhc_readl_le, .read_w = esdhc_readw_le, + .write_l = esdhc_writel_le, .write_w = esdhc_writew_le, .write_b = esdhc_writeb_le, - .set_clock = esdhc_set_clock, + .set_clock = esdhc_pltfm_set_clock, .get_max_clock = esdhc_pltfm_get_max_clock, .get_min_clock = esdhc_pltfm_get_min_clock, + .get_ro = esdhc_pltfm_get_ro, + .set_bus_width = esdhc_pltfm_set_bus_width, + .set_uhs_signaling = esdhc_set_uhs_signaling, + .reset = esdhc_reset, }; -struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = { - .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_NO_MULTIBLOCK - | SDHCI_QUIRK_BROKEN_ADMA, - /* ADMA has issues. Might be fixable */ - /* NO_MULTIBLOCK might be MX35 only (Errata: ENGcm07207) */ +static const struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = { + .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_NO_HISPD_BIT + | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC + | SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC + | SDHCI_QUIRK_BROKEN_CARD_DETECTION, .ops = &sdhci_esdhc_ops, - .init = esdhc_pltfm_init, - .exit = esdhc_pltfm_exit, }; + +#ifdef CONFIG_OF +static int +sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, + struct esdhc_platform_data *boarddata) +{ + struct device_node *np = pdev->dev.of_node; + + if (!np) + return -ENODEV; + + if (of_get_property(np, "non-removable", NULL)) + boarddata->cd_type = ESDHC_CD_PERMANENT; + + if (of_get_property(np, "fsl,cd-controller", NULL)) + boarddata->cd_type = ESDHC_CD_CONTROLLER; + + if (of_get_property(np, "fsl,wp-controller", NULL)) + boarddata->wp_type = ESDHC_WP_CONTROLLER; + + boarddata->cd_gpio = of_get_named_gpio(np, "cd-gpios", 0); + if (gpio_is_valid(boarddata->cd_gpio)) + boarddata->cd_type = ESDHC_CD_GPIO; + + boarddata->wp_gpio = of_get_named_gpio(np, "wp-gpios", 0); + if (gpio_is_valid(boarddata->wp_gpio)) + boarddata->wp_type = ESDHC_WP_GPIO; + + of_property_read_u32(np, "bus-width", &boarddata->max_bus_width); + + of_property_read_u32(np, "max-frequency", &boarddata->f_max); + + if (of_find_property(np, "no-1-8-v", NULL)) + boarddata->support_vsel = false; + else + boarddata->support_vsel = true; + + if (of_property_read_u32(np, "fsl,delay-line", &boarddata->delay_line)) + boarddata->delay_line = 0; + + return 0; +} +#else +static inline int +sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, + struct esdhc_platform_data *boarddata) +{ + return -ENODEV; +} +#endif + +static int sdhci_esdhc_imx_probe(struct platform_device *pdev) +{ + const struct of_device_id *of_id = + of_match_device(imx_esdhc_dt_ids, &pdev->dev); + struct sdhci_pltfm_host *pltfm_host; + struct sdhci_host *host; + struct esdhc_platform_data *boarddata; + int err; + struct pltfm_imx_data *imx_data; + + host = sdhci_pltfm_init(pdev, &sdhci_esdhc_imx_pdata, 0); + if (IS_ERR(host)) + return PTR_ERR(host); + + pltfm_host = sdhci_priv(host); + + imx_data = devm_kzalloc(&pdev->dev, sizeof(*imx_data), GFP_KERNEL); + if (!imx_data) { + err = -ENOMEM; + goto free_sdhci; + } + + imx_data->socdata = of_id ? of_id->data : (struct esdhc_soc_data *) + pdev->id_entry->driver_data; + pltfm_host->priv = imx_data; + + imx_data->clk_ipg = devm_clk_get(&pdev->dev, "ipg"); + if (IS_ERR(imx_data->clk_ipg)) { + err = PTR_ERR(imx_data->clk_ipg); + goto free_sdhci; + } + + imx_data->clk_ahb = devm_clk_get(&pdev->dev, "ahb"); + if (IS_ERR(imx_data->clk_ahb)) { + err = PTR_ERR(imx_data->clk_ahb); + goto free_sdhci; + } + + imx_data->clk_per = devm_clk_get(&pdev->dev, "per"); + if (IS_ERR(imx_data->clk_per)) { + err = PTR_ERR(imx_data->clk_per); + goto free_sdhci; + } + + pltfm_host->clk = imx_data->clk_per; + pltfm_host->clock = clk_get_rate(pltfm_host->clk); + clk_prepare_enable(imx_data->clk_per); + clk_prepare_enable(imx_data->clk_ipg); + clk_prepare_enable(imx_data->clk_ahb); + + imx_data->pinctrl = devm_pinctrl_get(&pdev->dev); + if (IS_ERR(imx_data->pinctrl)) { + err = PTR_ERR(imx_data->pinctrl); + goto disable_clk; + } + + imx_data->pins_default = pinctrl_lookup_state(imx_data->pinctrl, + PINCTRL_STATE_DEFAULT); + if (IS_ERR(imx_data->pins_default)) { + err = PTR_ERR(imx_data->pins_default); + dev_err(mmc_dev(host->mmc), "could not get default state\n"); + goto disable_clk; + } + + host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; + + if (imx_data->socdata->flags & ESDHC_FLAG_ENGCM07207) + /* Fix errata ENGcm07207 present on i.MX25 and i.MX35 */ + host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK + | SDHCI_QUIRK_BROKEN_ADMA; + + /* + * The imx6q ROM code will change the default watermark level setting + * to something insane. Change it back here. + */ + if (esdhc_is_usdhc(imx_data)) { + writel(0x08100810, host->ioaddr + ESDHC_WTMK_LVL); + host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN; + host->mmc->caps |= MMC_CAP_1_8V_DDR; + } + + if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING) + sdhci_esdhc_ops.platform_execute_tuning = + esdhc_executing_tuning; + + if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) + writel(readl(host->ioaddr + ESDHC_TUNING_CTRL) | + ESDHC_STD_TUNING_EN | ESDHC_TUNING_START_TAP, + host->ioaddr + ESDHC_TUNING_CTRL); + + boarddata = &imx_data->boarddata; + if (sdhci_esdhc_imx_probe_dt(pdev, boarddata) < 0) { + if (!host->mmc->parent->platform_data) { + dev_err(mmc_dev(host->mmc), "no board data!\n"); + err = -EINVAL; + goto disable_clk; + } + imx_data->boarddata = *((struct esdhc_platform_data *) + host->mmc->parent->platform_data); + } + + /* write_protect */ + if (boarddata->wp_type == ESDHC_WP_GPIO) { + err = mmc_gpio_request_ro(host->mmc, boarddata->wp_gpio); + if (err) { + dev_err(mmc_dev(host->mmc), + "failed to request write-protect gpio!\n"); + goto disable_clk; + } + host->mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; + } + + /* card_detect */ + switch (boarddata->cd_type) { + case ESDHC_CD_GPIO: + err = mmc_gpio_request_cd(host->mmc, boarddata->cd_gpio, 0); + if (err) { + dev_err(mmc_dev(host->mmc), + "failed to request card-detect gpio!\n"); + goto disable_clk; + } + /* fall through */ + + case ESDHC_CD_CONTROLLER: + /* we have a working card_detect back */ + host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION; + break; + + case ESDHC_CD_PERMANENT: + host->mmc->caps |= MMC_CAP_NONREMOVABLE; + break; + + case ESDHC_CD_NONE: + break; + } + + switch (boarddata->max_bus_width) { + case 8: + host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA; + break; + case 4: + host->mmc->caps |= MMC_CAP_4_BIT_DATA; + break; + case 1: + default: + host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA; + break; + } + + /* sdr50 and sdr104 needs work on 1.8v signal voltage */ + if ((boarddata->support_vsel) && esdhc_is_usdhc(imx_data)) { + imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl, + ESDHC_PINCTRL_STATE_100MHZ); + imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl, + ESDHC_PINCTRL_STATE_200MHZ); + if (IS_ERR(imx_data->pins_100mhz) || + IS_ERR(imx_data->pins_200mhz)) { + dev_warn(mmc_dev(host->mmc), + "could not get ultra high speed state, work on normal mode\n"); + /* fall back to not support uhs by specify no 1.8v quirk */ + host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; + } + } else { + host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; + } + + err = sdhci_add_host(host); + if (err) + goto disable_clk; + + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, 50); + pm_runtime_use_autosuspend(&pdev->dev); + pm_suspend_ignore_children(&pdev->dev, 1); + + return 0; + +disable_clk: + clk_disable_unprepare(imx_data->clk_per); + clk_disable_unprepare(imx_data->clk_ipg); + clk_disable_unprepare(imx_data->clk_ahb); +free_sdhci: + sdhci_pltfm_free(pdev); + return err; +} + +static int sdhci_esdhc_imx_remove(struct platform_device *pdev) +{ + struct sdhci_host *host = platform_get_drvdata(pdev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = pltfm_host->priv; + int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff); + + sdhci_remove_host(host, dead); + + pm_runtime_dont_use_autosuspend(&pdev->dev); + pm_runtime_disable(&pdev->dev); + + if (!IS_ENABLED(CONFIG_PM_RUNTIME)) { + clk_disable_unprepare(imx_data->clk_per); + clk_disable_unprepare(imx_data->clk_ipg); + clk_disable_unprepare(imx_data->clk_ahb); + } + + sdhci_pltfm_free(pdev); + + return 0; +} + +#ifdef CONFIG_PM_RUNTIME +static int sdhci_esdhc_runtime_suspend(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = pltfm_host->priv; + int ret; + + ret = sdhci_runtime_suspend_host(host); + + if (!sdhci_sdio_irq_enabled(host)) { + clk_disable_unprepare(imx_data->clk_per); + clk_disable_unprepare(imx_data->clk_ipg); + } + clk_disable_unprepare(imx_data->clk_ahb); + + return ret; +} + +static int sdhci_esdhc_runtime_resume(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = pltfm_host->priv; + + if (!sdhci_sdio_irq_enabled(host)) { + clk_prepare_enable(imx_data->clk_per); + clk_prepare_enable(imx_data->clk_ipg); + } + clk_prepare_enable(imx_data->clk_ahb); + + return sdhci_runtime_resume_host(host); +} +#endif + +static const struct dev_pm_ops sdhci_esdhc_pmops = { + SET_SYSTEM_SLEEP_PM_OPS(sdhci_pltfm_suspend, sdhci_pltfm_resume) + SET_RUNTIME_PM_OPS(sdhci_esdhc_runtime_suspend, + sdhci_esdhc_runtime_resume, NULL) +}; + +static struct platform_driver sdhci_esdhc_imx_driver = { + .driver = { + .name = "sdhci-esdhc-imx", + .owner = THIS_MODULE, + .of_match_table = imx_esdhc_dt_ids, + .pm = &sdhci_esdhc_pmops, + }, + .id_table = imx_esdhc_devtype, + .probe = sdhci_esdhc_imx_probe, + .remove = sdhci_esdhc_imx_remove, +}; + +module_platform_driver(sdhci_esdhc_imx_driver); + +MODULE_DESCRIPTION("SDHCI driver for Freescale i.MX eSDHC"); +MODULE_AUTHOR("Wolfram Sang <w.sang@pengutronix.de>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/sdhci-esdhc.h b/drivers/mmc/host/sdhci-esdhc.h index afaf1bc4913..3497cfaf683 100644 --- a/drivers/mmc/host/sdhci-esdhc.h +++ b/drivers/mmc/host/sdhci-esdhc.h @@ -19,13 +19,9 @@ */ #define ESDHC_DEFAULT_QUIRKS (SDHCI_QUIRK_FORCE_BLK_SZ_2048 | \ - SDHCI_QUIRK_BROKEN_CARD_DETECTION | \ SDHCI_QUIRK_NO_BUSY_IRQ | \ - SDHCI_QUIRK_NONSTANDARD_CLOCK | \ SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | \ - SDHCI_QUIRK_PIO_NEEDS_DELAY | \ - SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET | \ - SDHCI_QUIRK_NO_CARD_NO_RESET) + SDHCI_QUIRK_PIO_NEEDS_DELAY) #define ESDHC_SYSTEM_CONTROL 0x2c #define ESDHC_CLOCK_MASK 0x0000fff0 @@ -38,46 +34,17 @@ /* pltfm-specific */ #define ESDHC_HOST_CONTROL_LE 0x20 +/* + * P2020 interpretation of the SDHCI_HOST_CONTROL register + */ +#define ESDHC_CTRL_4BITBUS (0x1 << 1) +#define ESDHC_CTRL_8BITBUS (0x2 << 1) +#define ESDHC_CTRL_BUSWIDTH_MASK (0x3 << 1) + /* OF-specific */ #define ESDHC_DMA_SYSCTL 0x40c #define ESDHC_DMA_SNOOP 0x00000040 #define ESDHC_HOST_CONTROL_RES 0x05 -static inline void esdhc_set_clock(struct sdhci_host *host, unsigned int clock) -{ - int pre_div = 2; - int div = 1; - u32 temp; - - temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL); - temp &= ~(ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN - | ESDHC_CLOCK_MASK); - sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL); - - if (clock == 0) - goto out; - - while (host->max_clk / pre_div / 16 > clock && pre_div < 256) - pre_div *= 2; - - while (host->max_clk / pre_div / div > clock && div < 16) - div++; - - dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n", - clock, host->max_clk / pre_div / div); - - pre_div >>= 1; - div--; - - temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL); - temp |= (ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN - | (div << ESDHC_DIVIDER_SHIFT) - | (pre_div << ESDHC_PREDIV_SHIFT)); - sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL); - mdelay(100); -out: - host->clock = clock; -} - #endif /* _DRIVERS_MMC_SDHCI_ESDHC_H */ diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c new file mode 100644 index 00000000000..40573a58486 --- /dev/null +++ b/drivers/mmc/host/sdhci-msm.c @@ -0,0 +1,622 @@ +/* + * drivers/mmc/host/sdhci-msm.c - Qualcomm SDHCI Platform driver + * + * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/regulator/consumer.h> +#include <linux/delay.h> +#include <linux/mmc/mmc.h> +#include <linux/slab.h> + +#include "sdhci-pltfm.h" + +#define CORE_HC_MODE 0x78 +#define HC_MODE_EN 0x1 +#define CORE_POWER 0x0 +#define CORE_SW_RST BIT(7) + +#define MAX_PHASES 16 +#define CORE_DLL_LOCK BIT(7) +#define CORE_DLL_EN BIT(16) +#define CORE_CDR_EN BIT(17) +#define CORE_CK_OUT_EN BIT(18) +#define CORE_CDR_EXT_EN BIT(19) +#define CORE_DLL_PDN BIT(29) +#define CORE_DLL_RST BIT(30) +#define CORE_DLL_CONFIG 0x100 +#define CORE_DLL_STATUS 0x108 + +#define CORE_VENDOR_SPEC 0x10c +#define CORE_CLK_PWRSAVE BIT(1) + +#define CDR_SELEXT_SHIFT 20 +#define CDR_SELEXT_MASK (0xf << CDR_SELEXT_SHIFT) +#define CMUX_SHIFT_PHASE_SHIFT 24 +#define CMUX_SHIFT_PHASE_MASK (7 << CMUX_SHIFT_PHASE_SHIFT) + +static const u32 tuning_block_64[] = { + 0x00ff0fff, 0xccc3ccff, 0xffcc3cc3, 0xeffefffe, + 0xddffdfff, 0xfbfffbff, 0xff7fffbf, 0xefbdf777, + 0xf0fff0ff, 0x3cccfc0f, 0xcfcc33cc, 0xeeffefff, + 0xfdfffdff, 0xffbfffdf, 0xfff7ffbb, 0xde7b7ff7 +}; + +static const u32 tuning_block_128[] = { + 0xff00ffff, 0x0000ffff, 0xccccffff, 0xcccc33cc, + 0xcc3333cc, 0xffffcccc, 0xffffeeff, 0xffeeeeff, + 0xffddffff, 0xddddffff, 0xbbffffff, 0xbbffffff, + 0xffffffbb, 0xffffff77, 0x77ff7777, 0xffeeddbb, + 0x00ffffff, 0x00ffffff, 0xccffff00, 0xcc33cccc, + 0x3333cccc, 0xffcccccc, 0xffeeffff, 0xeeeeffff, + 0xddffffff, 0xddffffff, 0xffffffdd, 0xffffffbb, + 0xffffbbbb, 0xffff77ff, 0xff7777ff, 0xeeddbb77 +}; + +struct sdhci_msm_host { + struct platform_device *pdev; + void __iomem *core_mem; /* MSM SDCC mapped address */ + struct clk *clk; /* main SD/MMC bus clock */ + struct clk *pclk; /* SDHC peripheral bus clock */ + struct clk *bus_clk; /* SDHC bus voter clock */ + struct mmc_host *mmc; + struct sdhci_pltfm_data sdhci_msm_pdata; +}; + +/* Platform specific tuning */ +static inline int msm_dll_poll_ck_out_en(struct sdhci_host *host, u8 poll) +{ + u32 wait_cnt = 50; + u8 ck_out_en; + struct mmc_host *mmc = host->mmc; + + /* Poll for CK_OUT_EN bit. max. poll time = 50us */ + ck_out_en = !!(readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) & + CORE_CK_OUT_EN); + + while (ck_out_en != poll) { + if (--wait_cnt == 0) { + dev_err(mmc_dev(mmc), "%s: CK_OUT_EN bit is not %d\n", + mmc_hostname(mmc), poll); + return -ETIMEDOUT; + } + udelay(1); + + ck_out_en = !!(readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) & + CORE_CK_OUT_EN); + } + + return 0; +} + +static int msm_config_cm_dll_phase(struct sdhci_host *host, u8 phase) +{ + int rc; + static const u8 grey_coded_phase_table[] = { + 0x0, 0x1, 0x3, 0x2, 0x6, 0x7, 0x5, 0x4, + 0xc, 0xd, 0xf, 0xe, 0xa, 0xb, 0x9, 0x8 + }; + unsigned long flags; + u32 config; + struct mmc_host *mmc = host->mmc; + + spin_lock_irqsave(&host->lock, flags); + + config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); + config &= ~(CORE_CDR_EN | CORE_CK_OUT_EN); + config |= (CORE_CDR_EXT_EN | CORE_DLL_EN); + writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG); + + /* Wait until CK_OUT_EN bit of DLL_CONFIG register becomes '0' */ + rc = msm_dll_poll_ck_out_en(host, 0); + if (rc) + goto err_out; + + /* + * Write the selected DLL clock output phase (0 ... 15) + * to CDR_SELEXT bit field of DLL_CONFIG register. + */ + config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); + config &= ~CDR_SELEXT_MASK; + config |= grey_coded_phase_table[phase] << CDR_SELEXT_SHIFT; + writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG); + + /* Set CK_OUT_EN bit of DLL_CONFIG register to 1. */ + writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) + | CORE_CK_OUT_EN), host->ioaddr + CORE_DLL_CONFIG); + + /* Wait until CK_OUT_EN bit of DLL_CONFIG register becomes '1' */ + rc = msm_dll_poll_ck_out_en(host, 1); + if (rc) + goto err_out; + + config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); + config |= CORE_CDR_EN; + config &= ~CORE_CDR_EXT_EN; + writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG); + goto out; + +err_out: + dev_err(mmc_dev(mmc), "%s: Failed to set DLL phase: %d\n", + mmc_hostname(mmc), phase); +out: + spin_unlock_irqrestore(&host->lock, flags); + return rc; +} + +/* + * Find out the greatest range of consecuitive selected + * DLL clock output phases that can be used as sampling + * setting for SD3.0 UHS-I card read operation (in SDR104 + * timing mode) or for eMMC4.5 card read operation (in HS200 + * timing mode). + * Select the 3/4 of the range and configure the DLL with the + * selected DLL clock output phase. + */ + +static int msm_find_most_appropriate_phase(struct sdhci_host *host, + u8 *phase_table, u8 total_phases) +{ + int ret; + u8 ranges[MAX_PHASES][MAX_PHASES] = { {0}, {0} }; + u8 phases_per_row[MAX_PHASES] = { 0 }; + int row_index = 0, col_index = 0, selected_row_index = 0, curr_max = 0; + int i, cnt, phase_0_raw_index = 0, phase_15_raw_index = 0; + bool phase_0_found = false, phase_15_found = false; + struct mmc_host *mmc = host->mmc; + + if (!total_phases || (total_phases > MAX_PHASES)) { + dev_err(mmc_dev(mmc), "%s: Invalid argument: total_phases=%d\n", + mmc_hostname(mmc), total_phases); + return -EINVAL; + } + + for (cnt = 0; cnt < total_phases; cnt++) { + ranges[row_index][col_index] = phase_table[cnt]; + phases_per_row[row_index] += 1; + col_index++; + + if ((cnt + 1) == total_phases) { + continue; + /* check if next phase in phase_table is consecutive or not */ + } else if ((phase_table[cnt] + 1) != phase_table[cnt + 1]) { + row_index++; + col_index = 0; + } + } + + if (row_index >= MAX_PHASES) + return -EINVAL; + + /* Check if phase-0 is present in first valid window? */ + if (!ranges[0][0]) { + phase_0_found = true; + phase_0_raw_index = 0; + /* Check if cycle exist between 2 valid windows */ + for (cnt = 1; cnt <= row_index; cnt++) { + if (phases_per_row[cnt]) { + for (i = 0; i < phases_per_row[cnt]; i++) { + if (ranges[cnt][i] == 15) { + phase_15_found = true; + phase_15_raw_index = cnt; + break; + } + } + } + } + } + + /* If 2 valid windows form cycle then merge them as single window */ + if (phase_0_found && phase_15_found) { + /* number of phases in raw where phase 0 is present */ + u8 phases_0 = phases_per_row[phase_0_raw_index]; + /* number of phases in raw where phase 15 is present */ + u8 phases_15 = phases_per_row[phase_15_raw_index]; + + if (phases_0 + phases_15 >= MAX_PHASES) + /* + * If there are more than 1 phase windows then total + * number of phases in both the windows should not be + * more than or equal to MAX_PHASES. + */ + return -EINVAL; + + /* Merge 2 cyclic windows */ + i = phases_15; + for (cnt = 0; cnt < phases_0; cnt++) { + ranges[phase_15_raw_index][i] = + ranges[phase_0_raw_index][cnt]; + if (++i >= MAX_PHASES) + break; + } + + phases_per_row[phase_0_raw_index] = 0; + phases_per_row[phase_15_raw_index] = phases_15 + phases_0; + } + + for (cnt = 0; cnt <= row_index; cnt++) { + if (phases_per_row[cnt] > curr_max) { + curr_max = phases_per_row[cnt]; + selected_row_index = cnt; + } + } + + i = (curr_max * 3) / 4; + if (i) + i--; + + ret = ranges[selected_row_index][i]; + + if (ret >= MAX_PHASES) { + ret = -EINVAL; + dev_err(mmc_dev(mmc), "%s: Invalid phase selected=%d\n", + mmc_hostname(mmc), ret); + } + + return ret; +} + +static inline void msm_cm_dll_set_freq(struct sdhci_host *host) +{ + u32 mclk_freq = 0, config; + + /* Program the MCLK value to MCLK_FREQ bit field */ + if (host->clock <= 112000000) + mclk_freq = 0; + else if (host->clock <= 125000000) + mclk_freq = 1; + else if (host->clock <= 137000000) + mclk_freq = 2; + else if (host->clock <= 150000000) + mclk_freq = 3; + else if (host->clock <= 162000000) + mclk_freq = 4; + else if (host->clock <= 175000000) + mclk_freq = 5; + else if (host->clock <= 187000000) + mclk_freq = 6; + else if (host->clock <= 200000000) + mclk_freq = 7; + + config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); + config &= ~CMUX_SHIFT_PHASE_MASK; + config |= mclk_freq << CMUX_SHIFT_PHASE_SHIFT; + writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG); +} + +/* Initialize the DLL (Programmable Delay Line) */ +static int msm_init_cm_dll(struct sdhci_host *host) +{ + struct mmc_host *mmc = host->mmc; + int wait_cnt = 50; + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + + /* + * Make sure that clock is always enabled when DLL + * tuning is in progress. Keeping PWRSAVE ON may + * turn off the clock. + */ + writel_relaxed((readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC) + & ~CORE_CLK_PWRSAVE), host->ioaddr + CORE_VENDOR_SPEC); + + /* Write 1 to DLL_RST bit of DLL_CONFIG register */ + writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) + | CORE_DLL_RST), host->ioaddr + CORE_DLL_CONFIG); + + /* Write 1 to DLL_PDN bit of DLL_CONFIG register */ + writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) + | CORE_DLL_PDN), host->ioaddr + CORE_DLL_CONFIG); + msm_cm_dll_set_freq(host); + + /* Write 0 to DLL_RST bit of DLL_CONFIG register */ + writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) + & ~CORE_DLL_RST), host->ioaddr + CORE_DLL_CONFIG); + + /* Write 0 to DLL_PDN bit of DLL_CONFIG register */ + writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) + & ~CORE_DLL_PDN), host->ioaddr + CORE_DLL_CONFIG); + + /* Set DLL_EN bit to 1. */ + writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) + | CORE_DLL_EN), host->ioaddr + CORE_DLL_CONFIG); + + /* Set CK_OUT_EN bit to 1. */ + writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) + | CORE_CK_OUT_EN), host->ioaddr + CORE_DLL_CONFIG); + + /* Wait until DLL_LOCK bit of DLL_STATUS register becomes '1' */ + while (!(readl_relaxed(host->ioaddr + CORE_DLL_STATUS) & + CORE_DLL_LOCK)) { + /* max. wait for 50us sec for LOCK bit to be set */ + if (--wait_cnt == 0) { + dev_err(mmc_dev(mmc), "%s: DLL failed to LOCK\n", + mmc_hostname(mmc)); + spin_unlock_irqrestore(&host->lock, flags); + return -ETIMEDOUT; + } + udelay(1); + } + + spin_unlock_irqrestore(&host->lock, flags); + return 0; +} + +static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode) +{ + int tuning_seq_cnt = 3; + u8 phase, *data_buf, tuned_phases[16], tuned_phase_cnt = 0; + const u32 *tuning_block_pattern = tuning_block_64; + int size = sizeof(tuning_block_64); /* Pattern size in bytes */ + int rc; + struct mmc_host *mmc = host->mmc; + struct mmc_ios ios = host->mmc->ios; + + /* + * Tuning is required for SDR104, HS200 and HS400 cards and + * if clock frequency is greater than 100MHz in these modes. + */ + if (host->clock <= 100 * 1000 * 1000 || + !((ios.timing == MMC_TIMING_MMC_HS200) || + (ios.timing == MMC_TIMING_UHS_SDR104))) + return 0; + + if ((opcode == MMC_SEND_TUNING_BLOCK_HS200) && + (mmc->ios.bus_width == MMC_BUS_WIDTH_8)) { + tuning_block_pattern = tuning_block_128; + size = sizeof(tuning_block_128); + } + + data_buf = kmalloc(size, GFP_KERNEL); + if (!data_buf) + return -ENOMEM; + +retry: + /* First of all reset the tuning block */ + rc = msm_init_cm_dll(host); + if (rc) + goto out; + + phase = 0; + do { + struct mmc_command cmd = { 0 }; + struct mmc_data data = { 0 }; + struct mmc_request mrq = { + .cmd = &cmd, + .data = &data + }; + struct scatterlist sg; + + /* Set the phase in delay line hw block */ + rc = msm_config_cm_dll_phase(host, phase); + if (rc) + goto out; + + cmd.opcode = opcode; + cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; + + data.blksz = size; + data.blocks = 1; + data.flags = MMC_DATA_READ; + data.timeout_ns = NSEC_PER_SEC; /* 1 second */ + + data.sg = &sg; + data.sg_len = 1; + sg_init_one(&sg, data_buf, size); + memset(data_buf, 0, size); + mmc_wait_for_req(mmc, &mrq); + + if (!cmd.error && !data.error && + !memcmp(data_buf, tuning_block_pattern, size)) { + /* Tuning is successful at this tuning point */ + tuned_phases[tuned_phase_cnt++] = phase; + dev_dbg(mmc_dev(mmc), "%s: Found good phase = %d\n", + mmc_hostname(mmc), phase); + } + } while (++phase < ARRAY_SIZE(tuned_phases)); + + if (tuned_phase_cnt) { + rc = msm_find_most_appropriate_phase(host, tuned_phases, + tuned_phase_cnt); + if (rc < 0) + goto out; + else + phase = rc; + + /* + * Finally set the selected phase in delay + * line hw block. + */ + rc = msm_config_cm_dll_phase(host, phase); + if (rc) + goto out; + dev_dbg(mmc_dev(mmc), "%s: Setting the tuning phase to %d\n", + mmc_hostname(mmc), phase); + } else { + if (--tuning_seq_cnt) + goto retry; + /* Tuning failed */ + dev_dbg(mmc_dev(mmc), "%s: No tuning point found\n", + mmc_hostname(mmc)); + rc = -EIO; + } + +out: + kfree(data_buf); + return rc; +} + +static const struct of_device_id sdhci_msm_dt_match[] = { + { .compatible = "qcom,sdhci-msm-v4" }, + {}, +}; + +MODULE_DEVICE_TABLE(of, sdhci_msm_dt_match); + +static struct sdhci_ops sdhci_msm_ops = { + .platform_execute_tuning = sdhci_msm_execute_tuning, + .reset = sdhci_reset, + .set_clock = sdhci_set_clock, + .set_bus_width = sdhci_set_bus_width, + .set_uhs_signaling = sdhci_set_uhs_signaling, +}; + +static int sdhci_msm_probe(struct platform_device *pdev) +{ + struct sdhci_host *host; + struct sdhci_pltfm_host *pltfm_host; + struct sdhci_msm_host *msm_host; + struct resource *core_memres; + int ret; + u16 host_version; + + msm_host = devm_kzalloc(&pdev->dev, sizeof(*msm_host), GFP_KERNEL); + if (!msm_host) + return -ENOMEM; + + msm_host->sdhci_msm_pdata.ops = &sdhci_msm_ops; + host = sdhci_pltfm_init(pdev, &msm_host->sdhci_msm_pdata, 0); + if (IS_ERR(host)) + return PTR_ERR(host); + + pltfm_host = sdhci_priv(host); + pltfm_host->priv = msm_host; + msm_host->mmc = host->mmc; + msm_host->pdev = pdev; + + ret = mmc_of_parse(host->mmc); + if (ret) + goto pltfm_free; + + sdhci_get_of_property(pdev); + + /* Setup SDCC bus voter clock. */ + msm_host->bus_clk = devm_clk_get(&pdev->dev, "bus"); + if (!IS_ERR(msm_host->bus_clk)) { + /* Vote for max. clk rate for max. performance */ + ret = clk_set_rate(msm_host->bus_clk, INT_MAX); + if (ret) + goto pltfm_free; + ret = clk_prepare_enable(msm_host->bus_clk); + if (ret) + goto pltfm_free; + } + + /* Setup main peripheral bus clock */ + msm_host->pclk = devm_clk_get(&pdev->dev, "iface"); + if (IS_ERR(msm_host->pclk)) { + ret = PTR_ERR(msm_host->pclk); + dev_err(&pdev->dev, "Perpheral clk setup failed (%d)\n", ret); + goto bus_clk_disable; + } + + ret = clk_prepare_enable(msm_host->pclk); + if (ret) + goto bus_clk_disable; + + /* Setup SDC MMC clock */ + msm_host->clk = devm_clk_get(&pdev->dev, "core"); + if (IS_ERR(msm_host->clk)) { + ret = PTR_ERR(msm_host->clk); + dev_err(&pdev->dev, "SDC MMC clk setup failed (%d)\n", ret); + goto pclk_disable; + } + + ret = clk_prepare_enable(msm_host->clk); + if (ret) + goto pclk_disable; + + core_memres = platform_get_resource(pdev, IORESOURCE_MEM, 1); + msm_host->core_mem = devm_ioremap_resource(&pdev->dev, core_memres); + + if (IS_ERR(msm_host->core_mem)) { + dev_err(&pdev->dev, "Failed to remap registers\n"); + ret = PTR_ERR(msm_host->core_mem); + goto clk_disable; + } + + /* Reset the core and Enable SDHC mode */ + writel_relaxed(readl_relaxed(msm_host->core_mem + CORE_POWER) | + CORE_SW_RST, msm_host->core_mem + CORE_POWER); + + /* SW reset can take upto 10HCLK + 15MCLK cycles. (min 40us) */ + usleep_range(1000, 5000); + if (readl(msm_host->core_mem + CORE_POWER) & CORE_SW_RST) { + dev_err(&pdev->dev, "Stuck in reset\n"); + ret = -ETIMEDOUT; + goto clk_disable; + } + + /* Set HC_MODE_EN bit in HC_MODE register */ + writel_relaxed(HC_MODE_EN, (msm_host->core_mem + CORE_HC_MODE)); + + host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION; + host->quirks |= SDHCI_QUIRK_SINGLE_POWER_WRITE; + + host_version = readw_relaxed((host->ioaddr + SDHCI_HOST_VERSION)); + dev_dbg(&pdev->dev, "Host Version: 0x%x Vendor Version 0x%x\n", + host_version, ((host_version & SDHCI_VENDOR_VER_MASK) >> + SDHCI_VENDOR_VER_SHIFT)); + + ret = sdhci_add_host(host); + if (ret) + goto clk_disable; + + return 0; + +clk_disable: + clk_disable_unprepare(msm_host->clk); +pclk_disable: + clk_disable_unprepare(msm_host->pclk); +bus_clk_disable: + if (!IS_ERR(msm_host->bus_clk)) + clk_disable_unprepare(msm_host->bus_clk); +pltfm_free: + sdhci_pltfm_free(pdev); + return ret; +} + +static int sdhci_msm_remove(struct platform_device *pdev) +{ + struct sdhci_host *host = platform_get_drvdata(pdev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_msm_host *msm_host = pltfm_host->priv; + int dead = (readl_relaxed(host->ioaddr + SDHCI_INT_STATUS) == + 0xffffffff); + + sdhci_remove_host(host, dead); + sdhci_pltfm_free(pdev); + clk_disable_unprepare(msm_host->clk); + clk_disable_unprepare(msm_host->pclk); + if (!IS_ERR(msm_host->bus_clk)) + clk_disable_unprepare(msm_host->bus_clk); + return 0; +} + +static struct platform_driver sdhci_msm_driver = { + .probe = sdhci_msm_probe, + .remove = sdhci_msm_remove, + .driver = { + .name = "sdhci_msm", + .owner = THIS_MODULE, + .of_match_table = sdhci_msm_dt_match, + }, +}; + +module_platform_driver(sdhci_msm_driver); + +MODULE_DESCRIPTION("Qualcomm Secure Digital Host Controller Interface driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c new file mode 100644 index 00000000000..5bd1092310f --- /dev/null +++ b/drivers/mmc/host/sdhci-of-arasan.c @@ -0,0 +1,228 @@ +/* + * Arasan Secure Digital Host Controller Interface. + * Copyright (C) 2011 - 2012 Michal Simek <monstr@monstr.eu> + * Copyright (c) 2012 Wind River Systems, Inc. + * Copyright (C) 2013 Pengutronix e.K. + * Copyright (C) 2013 Xilinx Inc. + * + * Based on sdhci-of-esdhc.c + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * Copyright (c) 2009 MontaVista Software, Inc. + * + * Authors: Xiaobo Xie <X.Xie@freescale.com> + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include <linux/module.h> +#include "sdhci-pltfm.h" + +#define SDHCI_ARASAN_CLK_CTRL_OFFSET 0x2c + +#define CLK_CTRL_TIMEOUT_SHIFT 16 +#define CLK_CTRL_TIMEOUT_MASK (0xf << CLK_CTRL_TIMEOUT_SHIFT) +#define CLK_CTRL_TIMEOUT_MIN_EXP 13 + +/** + * struct sdhci_arasan_data + * @clk_ahb: Pointer to the AHB clock + */ +struct sdhci_arasan_data { + struct clk *clk_ahb; +}; + +static unsigned int sdhci_arasan_get_timeout_clock(struct sdhci_host *host) +{ + u32 div; + unsigned long freq; + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + + div = readl(host->ioaddr + SDHCI_ARASAN_CLK_CTRL_OFFSET); + div = (div & CLK_CTRL_TIMEOUT_MASK) >> CLK_CTRL_TIMEOUT_SHIFT; + + freq = clk_get_rate(pltfm_host->clk); + freq /= 1 << (CLK_CTRL_TIMEOUT_MIN_EXP + div); + + return freq; +} + +static struct sdhci_ops sdhci_arasan_ops = { + .set_clock = sdhci_set_clock, + .get_max_clock = sdhci_pltfm_clk_get_max_clock, + .get_timeout_clock = sdhci_arasan_get_timeout_clock, + .set_bus_width = sdhci_set_bus_width, + .reset = sdhci_reset, + .set_uhs_signaling = sdhci_set_uhs_signaling, +}; + +static struct sdhci_pltfm_data sdhci_arasan_pdata = { + .ops = &sdhci_arasan_ops, +}; + +#ifdef CONFIG_PM_SLEEP +/** + * sdhci_arasan_suspend - Suspend method for the driver + * @dev: Address of the device structure + * Returns 0 on success and error value on error + * + * Put the device in a low power state. + */ +static int sdhci_arasan_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct sdhci_host *host = platform_get_drvdata(pdev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_arasan_data *sdhci_arasan = pltfm_host->priv; + int ret; + + ret = sdhci_suspend_host(host); + if (ret) + return ret; + + clk_disable(pltfm_host->clk); + clk_disable(sdhci_arasan->clk_ahb); + + return 0; +} + +/** + * sdhci_arasan_resume - Resume method for the driver + * @dev: Address of the device structure + * Returns 0 on success and error value on error + * + * Resume operation after suspend + */ +static int sdhci_arasan_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct sdhci_host *host = platform_get_drvdata(pdev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_arasan_data *sdhci_arasan = pltfm_host->priv; + int ret; + + ret = clk_enable(sdhci_arasan->clk_ahb); + if (ret) { + dev_err(dev, "Cannot enable AHB clock.\n"); + return ret; + } + + ret = clk_enable(pltfm_host->clk); + if (ret) { + dev_err(dev, "Cannot enable SD clock.\n"); + clk_disable(sdhci_arasan->clk_ahb); + return ret; + } + + return sdhci_resume_host(host); +} +#endif /* ! CONFIG_PM_SLEEP */ + +static SIMPLE_DEV_PM_OPS(sdhci_arasan_dev_pm_ops, sdhci_arasan_suspend, + sdhci_arasan_resume); + +static int sdhci_arasan_probe(struct platform_device *pdev) +{ + int ret; + struct clk *clk_xin; + struct sdhci_host *host; + struct sdhci_pltfm_host *pltfm_host; + struct sdhci_arasan_data *sdhci_arasan; + + sdhci_arasan = devm_kzalloc(&pdev->dev, sizeof(*sdhci_arasan), + GFP_KERNEL); + if (!sdhci_arasan) + return -ENOMEM; + + sdhci_arasan->clk_ahb = devm_clk_get(&pdev->dev, "clk_ahb"); + if (IS_ERR(sdhci_arasan->clk_ahb)) { + dev_err(&pdev->dev, "clk_ahb clock not found.\n"); + return PTR_ERR(sdhci_arasan->clk_ahb); + } + + clk_xin = devm_clk_get(&pdev->dev, "clk_xin"); + if (IS_ERR(clk_xin)) { + dev_err(&pdev->dev, "clk_xin clock not found.\n"); + return PTR_ERR(clk_xin); + } + + ret = clk_prepare_enable(sdhci_arasan->clk_ahb); + if (ret) { + dev_err(&pdev->dev, "Unable to enable AHB clock.\n"); + return ret; + } + + ret = clk_prepare_enable(clk_xin); + if (ret) { + dev_err(&pdev->dev, "Unable to enable SD clock.\n"); + goto clk_dis_ahb; + } + + host = sdhci_pltfm_init(pdev, &sdhci_arasan_pdata, 0); + if (IS_ERR(host)) { + ret = PTR_ERR(host); + dev_err(&pdev->dev, "platform init failed (%u)\n", ret); + goto clk_disable_all; + } + + sdhci_get_of_property(pdev); + pltfm_host = sdhci_priv(host); + pltfm_host->priv = sdhci_arasan; + pltfm_host->clk = clk_xin; + + ret = sdhci_add_host(host); + if (ret) { + dev_err(&pdev->dev, "platform register failed (%u)\n", ret); + goto err_pltfm_free; + } + + return 0; + +err_pltfm_free: + sdhci_pltfm_free(pdev); +clk_disable_all: + clk_disable_unprepare(clk_xin); +clk_dis_ahb: + clk_disable_unprepare(sdhci_arasan->clk_ahb); + + return ret; +} + +static int sdhci_arasan_remove(struct platform_device *pdev) +{ + struct sdhci_host *host = platform_get_drvdata(pdev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_arasan_data *sdhci_arasan = pltfm_host->priv; + + clk_disable_unprepare(pltfm_host->clk); + clk_disable_unprepare(sdhci_arasan->clk_ahb); + + return sdhci_pltfm_unregister(pdev); +} + +static const struct of_device_id sdhci_arasan_of_match[] = { + { .compatible = "arasan,sdhci-8.9a" }, + { } +}; +MODULE_DEVICE_TABLE(of, sdhci_arasan_of_match); + +static struct platform_driver sdhci_arasan_driver = { + .driver = { + .name = "sdhci-arasan", + .owner = THIS_MODULE, + .of_match_table = sdhci_arasan_of_match, + .pm = &sdhci_arasan_dev_pm_ops, + }, + .probe = sdhci_arasan_probe, + .remove = sdhci_arasan_remove, +}; + +module_platform_driver(sdhci_arasan_driver); + +MODULE_DESCRIPTION("Driver for the Arasan SDHCI Controller"); +MODULE_AUTHOR("Soeren Brinkmann <soren.brinkmann@xilinx.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mmc/host/sdhci-of-core.c b/drivers/mmc/host/sdhci-of-core.c deleted file mode 100644 index c51b71174c1..00000000000 --- a/drivers/mmc/host/sdhci-of-core.c +++ /dev/null @@ -1,238 +0,0 @@ -/* - * OpenFirmware bindings for Secure Digital Host Controller Interface. - * - * Copyright (c) 2007 Freescale Semiconductor, Inc. - * Copyright (c) 2009 MontaVista Software, Inc. - * - * Authors: Xiaobo Xie <X.Xie@freescale.com> - * Anton Vorontsov <avorontsov@ru.mvista.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/of.h> -#include <linux/of_platform.h> -#include <linux/mmc/host.h> -#include <asm/machdep.h> -#include "sdhci-of.h" -#include "sdhci.h" - -#ifdef CONFIG_MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER - -/* - * These accessors are designed for big endian hosts doing I/O to - * little endian controllers incorporating a 32-bit hardware byte swapper. - */ - -u32 sdhci_be32bs_readl(struct sdhci_host *host, int reg) -{ - return in_be32(host->ioaddr + reg); -} - -u16 sdhci_be32bs_readw(struct sdhci_host *host, int reg) -{ - return in_be16(host->ioaddr + (reg ^ 0x2)); -} - -u8 sdhci_be32bs_readb(struct sdhci_host *host, int reg) -{ - return in_8(host->ioaddr + (reg ^ 0x3)); -} - -void sdhci_be32bs_writel(struct sdhci_host *host, u32 val, int reg) -{ - out_be32(host->ioaddr + reg, val); -} - -void sdhci_be32bs_writew(struct sdhci_host *host, u16 val, int reg) -{ - struct sdhci_of_host *of_host = sdhci_priv(host); - int base = reg & ~0x3; - int shift = (reg & 0x2) * 8; - - switch (reg) { - case SDHCI_TRANSFER_MODE: - /* - * Postpone this write, we must do it together with a - * command write that is down below. - */ - of_host->xfer_mode_shadow = val; - return; - case SDHCI_COMMAND: - sdhci_be32bs_writel(host, val << 16 | of_host->xfer_mode_shadow, - SDHCI_TRANSFER_MODE); - return; - } - clrsetbits_be32(host->ioaddr + base, 0xffff << shift, val << shift); -} - -void sdhci_be32bs_writeb(struct sdhci_host *host, u8 val, int reg) -{ - int base = reg & ~0x3; - int shift = (reg & 0x3) * 8; - - clrsetbits_be32(host->ioaddr + base , 0xff << shift, val << shift); -} -#endif /* CONFIG_MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER */ - -#ifdef CONFIG_PM - -static int sdhci_of_suspend(struct platform_device *ofdev, pm_message_t state) -{ - struct sdhci_host *host = dev_get_drvdata(&ofdev->dev); - - return mmc_suspend_host(host->mmc); -} - -static int sdhci_of_resume(struct platform_device *ofdev) -{ - struct sdhci_host *host = dev_get_drvdata(&ofdev->dev); - - return mmc_resume_host(host->mmc); -} - -#else - -#define sdhci_of_suspend NULL -#define sdhci_of_resume NULL - -#endif - -static bool __devinit sdhci_of_wp_inverted(struct device_node *np) -{ - if (of_get_property(np, "sdhci,wp-inverted", NULL)) - return true; - - /* Old device trees don't have the wp-inverted property. */ - return machine_is(mpc837x_rdb) || machine_is(mpc837x_mds); -} - -static int __devinit sdhci_of_probe(struct platform_device *ofdev, - const struct of_device_id *match) -{ - struct device_node *np = ofdev->dev.of_node; - struct sdhci_of_data *sdhci_of_data = match->data; - struct sdhci_host *host; - struct sdhci_of_host *of_host; - const u32 *clk; - int size; - int ret; - - if (!of_device_is_available(np)) - return -ENODEV; - - host = sdhci_alloc_host(&ofdev->dev, sizeof(*of_host)); - if (IS_ERR(host)) - return -ENOMEM; - - of_host = sdhci_priv(host); - dev_set_drvdata(&ofdev->dev, host); - - host->ioaddr = of_iomap(np, 0); - if (!host->ioaddr) { - ret = -ENOMEM; - goto err_addr_map; - } - - host->irq = irq_of_parse_and_map(np, 0); - if (!host->irq) { - ret = -EINVAL; - goto err_no_irq; - } - - host->hw_name = dev_name(&ofdev->dev); - if (sdhci_of_data) { - host->quirks = sdhci_of_data->quirks; - host->ops = &sdhci_of_data->ops; - } - - if (of_get_property(np, "sdhci,auto-cmd12", NULL)) - host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12; - - - if (of_get_property(np, "sdhci,1-bit-only", NULL)) - host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA; - - if (sdhci_of_wp_inverted(np)) - host->quirks |= SDHCI_QUIRK_INVERTED_WRITE_PROTECT; - - clk = of_get_property(np, "clock-frequency", &size); - if (clk && size == sizeof(*clk) && *clk) - of_host->clock = *clk; - - ret = sdhci_add_host(host); - if (ret) - goto err_add_host; - - return 0; - -err_add_host: - irq_dispose_mapping(host->irq); -err_no_irq: - iounmap(host->ioaddr); -err_addr_map: - sdhci_free_host(host); - return ret; -} - -static int __devexit sdhci_of_remove(struct platform_device *ofdev) -{ - struct sdhci_host *host = dev_get_drvdata(&ofdev->dev); - - sdhci_remove_host(host, 0); - sdhci_free_host(host); - irq_dispose_mapping(host->irq); - iounmap(host->ioaddr); - return 0; -} - -static const struct of_device_id sdhci_of_match[] = { -#ifdef CONFIG_MMC_SDHCI_OF_ESDHC - { .compatible = "fsl,mpc8379-esdhc", .data = &sdhci_esdhc, }, - { .compatible = "fsl,mpc8536-esdhc", .data = &sdhci_esdhc, }, - { .compatible = "fsl,esdhc", .data = &sdhci_esdhc, }, -#endif -#ifdef CONFIG_MMC_SDHCI_OF_HLWD - { .compatible = "nintendo,hollywood-sdhci", .data = &sdhci_hlwd, }, -#endif - { .compatible = "generic-sdhci", }, - {}, -}; -MODULE_DEVICE_TABLE(of, sdhci_of_match); - -static struct of_platform_driver sdhci_of_driver = { - .driver = { - .name = "sdhci-of", - .owner = THIS_MODULE, - .of_match_table = sdhci_of_match, - }, - .probe = sdhci_of_probe, - .remove = __devexit_p(sdhci_of_remove), - .suspend = sdhci_of_suspend, - .resume = sdhci_of_resume, -}; - -static int __init sdhci_of_init(void) -{ - return of_register_platform_driver(&sdhci_of_driver); -} -module_init(sdhci_of_init); - -static void __exit sdhci_of_exit(void) -{ - of_unregister_platform_driver(&sdhci_of_driver); -} -module_exit(sdhci_of_exit); - -MODULE_DESCRIPTION("Secure Digital Host Controller Interface OF driver"); -MODULE_AUTHOR("Xiaobo Xie <X.Xie@freescale.com>, " - "Anton Vorontsov <avorontsov@ru.mvista.com>"); -MODULE_LICENSE("GPL"); diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index fcd0e1fcba4..8be4dcfb49a 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -1,7 +1,7 @@ /* * Freescale eSDHC controller driver. * - * Copyright (c) 2007 Freescale Semiconductor, Inc. + * Copyright (c) 2007, 2010, 2012 Freescale Semiconductor, Inc. * Copyright (c) 2009 MontaVista Software, Inc. * * Authors: Xiaobo Xie <X.Xie@freescale.com> @@ -13,24 +13,92 @@ * your option) any later version. */ +#include <linux/err.h> #include <linux/io.h> +#include <linux/of.h> #include <linux/delay.h> +#include <linux/module.h> #include <linux/mmc/host.h> -#include "sdhci-of.h" -#include "sdhci.h" +#include "sdhci-pltfm.h" #include "sdhci-esdhc.h" +#define VENDOR_V_22 0x12 +#define VENDOR_V_23 0x13 +static u32 esdhc_readl(struct sdhci_host *host, int reg) +{ + u32 ret; + + ret = in_be32(host->ioaddr + reg); + /* + * The bit of ADMA flag in eSDHC is not compatible with standard + * SDHC register, so set fake flag SDHCI_CAN_DO_ADMA2 when ADMA is + * supported by eSDHC. + * And for many FSL eSDHC controller, the reset value of field + * SDHCI_CAN_DO_ADMA1 is one, but some of them can't support ADMA, + * only these vendor version is greater than 2.2/0x12 support ADMA. + * For FSL eSDHC, must aligned 4-byte, so use 0xFC to read the + * the verdor version number, oxFE is SDHCI_HOST_VERSION. + */ + if ((reg == SDHCI_CAPABILITIES) && (ret & SDHCI_CAN_DO_ADMA1)) { + u32 tmp = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS); + tmp = (tmp & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT; + if (tmp > VENDOR_V_22) + ret |= SDHCI_CAN_DO_ADMA2; + } + + return ret; +} + static u16 esdhc_readw(struct sdhci_host *host, int reg) { u16 ret; + int base = reg & ~0x3; + int shift = (reg & 0x2) * 8; if (unlikely(reg == SDHCI_HOST_VERSION)) - ret = in_be16(host->ioaddr + reg); + ret = in_be32(host->ioaddr + base) & 0xffff; else - ret = sdhci_be32bs_readw(host, reg); + ret = (in_be32(host->ioaddr + base) >> shift) & 0xffff; return ret; } +static u8 esdhc_readb(struct sdhci_host *host, int reg) +{ + int base = reg & ~0x3; + int shift = (reg & 0x3) * 8; + u8 ret = (in_be32(host->ioaddr + base) >> shift) & 0xff; + + /* + * "DMA select" locates at offset 0x28 in SD specification, but on + * P5020 or P3041, it locates at 0x29. + */ + if (reg == SDHCI_HOST_CONTROL) { + u32 dma_bits; + + dma_bits = in_be32(host->ioaddr + reg); + /* DMA select is 22,23 bits in Protocol Control Register */ + dma_bits = (dma_bits >> 5) & SDHCI_CTRL_DMA_MASK; + + /* fixup the result */ + ret &= ~SDHCI_CTRL_DMA_MASK; + ret |= dma_bits; + } + + return ret; +} + +static void esdhc_writel(struct sdhci_host *host, u32 val, int reg) +{ + /* + * Enable IRQSTATEN[BGESEN] is just to set IRQSTAT[BGE] + * when SYSCTL[RSTD]) is set for some special operations. + * No any impact other operation. + */ + if (reg == SDHCI_INT_ENABLE) + val |= SDHCI_INT_BLK_GAP; + sdhci_be32bs_writel(host, val, reg); +} + static void esdhc_writew(struct sdhci_host *host, u16 val, int reg) { if (reg == SDHCI_BLOCK_SIZE) { @@ -46,12 +114,69 @@ static void esdhc_writew(struct sdhci_host *host, u16 val, int reg) static void esdhc_writeb(struct sdhci_host *host, u8 val, int reg) { + /* + * "DMA select" location is offset 0x28 in SD specification, but on + * P5020 or P3041, it's located at 0x29. + */ + if (reg == SDHCI_HOST_CONTROL) { + u32 dma_bits; + + /* + * If host control register is not standard, exit + * this function + */ + if (host->quirks2 & SDHCI_QUIRK2_BROKEN_HOST_CONTROL) + return; + + /* DMA select is 22,23 bits in Protocol Control Register */ + dma_bits = (val & SDHCI_CTRL_DMA_MASK) << 5; + clrsetbits_be32(host->ioaddr + reg , SDHCI_CTRL_DMA_MASK << 5, + dma_bits); + val &= ~SDHCI_CTRL_DMA_MASK; + val |= in_be32(host->ioaddr + reg) & SDHCI_CTRL_DMA_MASK; + } + /* Prevent SDHCI core from writing reserved bits (e.g. HISPD). */ if (reg == SDHCI_HOST_CONTROL) val &= ~ESDHC_HOST_CONTROL_RES; sdhci_be32bs_writeb(host, val, reg); } +/* + * For Abort or Suspend after Stop at Block Gap, ignore the ADMA + * error(IRQSTAT[ADMAE]) if both Transfer Complete(IRQSTAT[TC]) + * and Block Gap Event(IRQSTAT[BGE]) are also set. + * For Continue, apply soft reset for data(SYSCTL[RSTD]); + * and re-issue the entire read transaction from beginning. + */ +static void esdhci_of_adma_workaround(struct sdhci_host *host, u32 intmask) +{ + u32 tmp; + bool applicable; + dma_addr_t dmastart; + dma_addr_t dmanow; + + tmp = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS); + tmp = (tmp & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT; + + applicable = (intmask & SDHCI_INT_DATA_END) && + (intmask & SDHCI_INT_BLK_GAP) && + (tmp == VENDOR_V_23); + if (!applicable) + return; + + host->data->error = 0; + dmastart = sg_dma_address(host->data->sg); + dmanow = dmastart + host->data->bytes_xfered; + /* + * Force update to the next DMA block boundary. + */ + dmanow = (dmanow & ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) + + SDHCI_DEFAULT_BOUNDARY_SIZE; + host->data->bytes_xfered = dmanow - dmastart; + sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS); +} + static int esdhc_of_enable_dma(struct sdhci_host *host) { setbits32(host->ioaddr + ESDHC_DMA_SYSCTL, ESDHC_DMA_SNOOP); @@ -60,30 +185,220 @@ static int esdhc_of_enable_dma(struct sdhci_host *host) static unsigned int esdhc_of_get_max_clock(struct sdhci_host *host) { - struct sdhci_of_host *of_host = sdhci_priv(host); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); - return of_host->clock; + return pltfm_host->clock; } static unsigned int esdhc_of_get_min_clock(struct sdhci_host *host) { - struct sdhci_of_host *of_host = sdhci_priv(host); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + + return pltfm_host->clock / 256 / 16; +} + +static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock) +{ + int pre_div = 2; + int div = 1; + u32 temp; + + host->mmc->actual_clock = 0; + + if (clock == 0) + return; + + /* Workaround to reduce the clock frequency for p1010 esdhc */ + if (of_find_compatible_node(NULL, NULL, "fsl,p1010-esdhc")) { + if (clock > 20000000) + clock -= 5000000; + if (clock > 40000000) + clock -= 5000000; + } + + temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL); + temp &= ~(ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN + | ESDHC_CLOCK_MASK); + sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL); + + while (host->max_clk / pre_div / 16 > clock && pre_div < 256) + pre_div *= 2; + + while (host->max_clk / pre_div / div > clock && div < 16) + div++; + + dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n", + clock, host->max_clk / pre_div / div); + + pre_div >>= 1; + div--; + + temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL); + temp |= (ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN + | (div << ESDHC_DIVIDER_SHIFT) + | (pre_div << ESDHC_PREDIV_SHIFT)); + sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL); + mdelay(1); +} + +static void esdhc_of_platform_init(struct sdhci_host *host) +{ + u32 vvn; + + vvn = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS); + vvn = (vvn & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT; + if (vvn == VENDOR_V_22) + host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23; + + if (vvn > VENDOR_V_22) + host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ; +} + +static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width) +{ + u32 ctrl; + + switch (width) { + case MMC_BUS_WIDTH_8: + ctrl = ESDHC_CTRL_8BITBUS; + break; - return of_host->clock / 256 / 16; + case MMC_BUS_WIDTH_4: + ctrl = ESDHC_CTRL_4BITBUS; + break; + + default: + ctrl = 0; + break; + } + + clrsetbits_be32(host->ioaddr + SDHCI_HOST_CONTROL, + ESDHC_CTRL_BUSWIDTH_MASK, ctrl); +} + +static const struct sdhci_ops sdhci_esdhc_ops = { + .read_l = esdhc_readl, + .read_w = esdhc_readw, + .read_b = esdhc_readb, + .write_l = esdhc_writel, + .write_w = esdhc_writew, + .write_b = esdhc_writeb, + .set_clock = esdhc_of_set_clock, + .enable_dma = esdhc_of_enable_dma, + .get_max_clock = esdhc_of_get_max_clock, + .get_min_clock = esdhc_of_get_min_clock, + .platform_init = esdhc_of_platform_init, + .adma_workaround = esdhci_of_adma_workaround, + .set_bus_width = esdhc_pltfm_set_bus_width, + .reset = sdhci_reset, + .set_uhs_signaling = sdhci_set_uhs_signaling, +}; + +#ifdef CONFIG_PM + +static u32 esdhc_proctl; +static int esdhc_of_suspend(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + + esdhc_proctl = sdhci_be32bs_readl(host, SDHCI_HOST_CONTROL); + + return sdhci_suspend_host(host); +} + +static int esdhc_of_resume(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + int ret = sdhci_resume_host(host); + + if (ret == 0) { + /* Isn't this already done by sdhci_resume_host() ? --rmk */ + esdhc_of_enable_dma(host); + sdhci_be32bs_writel(host, esdhc_proctl, SDHCI_HOST_CONTROL); + } + + return ret; } -struct sdhci_of_data sdhci_esdhc = { - .quirks = ESDHC_DEFAULT_QUIRKS, - .ops = { - .read_l = sdhci_be32bs_readl, - .read_w = esdhc_readw, - .read_b = sdhci_be32bs_readb, - .write_l = sdhci_be32bs_writel, - .write_w = esdhc_writew, - .write_b = esdhc_writeb, - .set_clock = esdhc_set_clock, - .enable_dma = esdhc_of_enable_dma, - .get_max_clock = esdhc_of_get_max_clock, - .get_min_clock = esdhc_of_get_min_clock, +static const struct dev_pm_ops esdhc_pmops = { + .suspend = esdhc_of_suspend, + .resume = esdhc_of_resume, +}; +#define ESDHC_PMOPS (&esdhc_pmops) +#else +#define ESDHC_PMOPS NULL +#endif + +static const struct sdhci_pltfm_data sdhci_esdhc_pdata = { + /* + * card detection could be handled via GPIO + * eSDHC cannot support End Attribute in NOP ADMA descriptor + */ + .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_CARD_DETECTION + | SDHCI_QUIRK_NO_CARD_NO_RESET + | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, + .ops = &sdhci_esdhc_ops, +}; + +static int sdhci_esdhc_probe(struct platform_device *pdev) +{ + struct sdhci_host *host; + struct device_node *np; + int ret; + + host = sdhci_pltfm_init(pdev, &sdhci_esdhc_pdata, 0); + if (IS_ERR(host)) + return PTR_ERR(host); + + sdhci_get_of_property(pdev); + + np = pdev->dev.of_node; + if (of_device_is_compatible(np, "fsl,p2020-esdhc")) { + /* + * Freescale messed up with P2020 as it has a non-standard + * host control register + */ + host->quirks2 |= SDHCI_QUIRK2_BROKEN_HOST_CONTROL; + } + + /* call to generic mmc_of_parse to support additional capabilities */ + mmc_of_parse(host->mmc); + mmc_of_parse_voltage(np, &host->ocr_mask); + + ret = sdhci_add_host(host); + if (ret) + sdhci_pltfm_free(pdev); + + return ret; +} + +static int sdhci_esdhc_remove(struct platform_device *pdev) +{ + return sdhci_pltfm_unregister(pdev); +} + +static const struct of_device_id sdhci_esdhc_of_match[] = { + { .compatible = "fsl,mpc8379-esdhc" }, + { .compatible = "fsl,mpc8536-esdhc" }, + { .compatible = "fsl,esdhc" }, + { } +}; +MODULE_DEVICE_TABLE(of, sdhci_esdhc_of_match); + +static struct platform_driver sdhci_esdhc_driver = { + .driver = { + .name = "sdhci-esdhc", + .owner = THIS_MODULE, + .of_match_table = sdhci_esdhc_of_match, + .pm = ESDHC_PMOPS, }, + .probe = sdhci_esdhc_probe, + .remove = sdhci_esdhc_remove, }; + +module_platform_driver(sdhci_esdhc_driver); + +MODULE_DESCRIPTION("SDHCI OF driver for Freescale MPC eSDHC"); +MODULE_AUTHOR("Xiaobo Xie <X.Xie@freescale.com>, " + "Anton Vorontsov <avorontsov@ru.mvista.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/sdhci-of-hlwd.c b/drivers/mmc/host/sdhci-of-hlwd.c index 68ddb7546ae..b341661369a 100644 --- a/drivers/mmc/host/sdhci-of-hlwd.c +++ b/drivers/mmc/host/sdhci-of-hlwd.c @@ -20,9 +20,9 @@ */ #include <linux/delay.h> +#include <linux/module.h> #include <linux/mmc/host.h> -#include "sdhci-of.h" -#include "sdhci.h" +#include "sdhci-pltfm.h" /* * Ops and quirks for the Nintendo Wii SDHCI controllers. @@ -51,15 +51,54 @@ static void sdhci_hlwd_writeb(struct sdhci_host *host, u8 val, int reg) udelay(SDHCI_HLWD_WRITE_DELAY); } -struct sdhci_of_data sdhci_hlwd = { +static const struct sdhci_ops sdhci_hlwd_ops = { + .read_l = sdhci_be32bs_readl, + .read_w = sdhci_be32bs_readw, + .read_b = sdhci_be32bs_readb, + .write_l = sdhci_hlwd_writel, + .write_w = sdhci_hlwd_writew, + .write_b = sdhci_hlwd_writeb, + .set_clock = sdhci_set_clock, + .set_bus_width = sdhci_set_bus_width, + .reset = sdhci_reset, + .set_uhs_signaling = sdhci_set_uhs_signaling, +}; + +static const struct sdhci_pltfm_data sdhci_hlwd_pdata = { .quirks = SDHCI_QUIRK_32BIT_DMA_ADDR | SDHCI_QUIRK_32BIT_DMA_SIZE, - .ops = { - .read_l = sdhci_be32bs_readl, - .read_w = sdhci_be32bs_readw, - .read_b = sdhci_be32bs_readb, - .write_l = sdhci_hlwd_writel, - .write_w = sdhci_hlwd_writew, - .write_b = sdhci_hlwd_writeb, + .ops = &sdhci_hlwd_ops, +}; + +static int sdhci_hlwd_probe(struct platform_device *pdev) +{ + return sdhci_pltfm_register(pdev, &sdhci_hlwd_pdata, 0); +} + +static int sdhci_hlwd_remove(struct platform_device *pdev) +{ + return sdhci_pltfm_unregister(pdev); +} + +static const struct of_device_id sdhci_hlwd_of_match[] = { + { .compatible = "nintendo,hollywood-sdhci" }, + { } +}; +MODULE_DEVICE_TABLE(of, sdhci_hlwd_of_match); + +static struct platform_driver sdhci_hlwd_driver = { + .driver = { + .name = "sdhci-hlwd", + .owner = THIS_MODULE, + .of_match_table = sdhci_hlwd_of_match, + .pm = SDHCI_PLTFM_PMOPS, }, + .probe = sdhci_hlwd_probe, + .remove = sdhci_hlwd_remove, }; + +module_platform_driver(sdhci_hlwd_driver); + +MODULE_DESCRIPTION("Nintendo Wii SDHCI OF driver"); +MODULE_AUTHOR("The GameCube Linux Team, Albert Herranz"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/sdhci-of.h b/drivers/mmc/host/sdhci-of.h deleted file mode 100644 index ad09ad9915d..00000000000 --- a/drivers/mmc/host/sdhci-of.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * OpenFirmware bindings for Secure Digital Host Controller Interface. - * - * Copyright (c) 2007 Freescale Semiconductor, Inc. - * Copyright (c) 2009 MontaVista Software, Inc. - * - * Authors: Xiaobo Xie <X.Xie@freescale.com> - * Anton Vorontsov <avorontsov@ru.mvista.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -#ifndef __SDHCI_OF_H -#define __SDHCI_OF_H - -#include <linux/types.h> -#include "sdhci.h" - -struct sdhci_of_data { - unsigned int quirks; - struct sdhci_ops ops; -}; - -struct sdhci_of_host { - unsigned int clock; - u16 xfer_mode_shadow; -}; - -extern u32 sdhci_be32bs_readl(struct sdhci_host *host, int reg); -extern u16 sdhci_be32bs_readw(struct sdhci_host *host, int reg); -extern u8 sdhci_be32bs_readb(struct sdhci_host *host, int reg); -extern void sdhci_be32bs_writel(struct sdhci_host *host, u32 val, int reg); -extern void sdhci_be32bs_writew(struct sdhci_host *host, u16 val, int reg); -extern void sdhci_be32bs_writeb(struct sdhci_host *host, u8 val, int reg); - -extern struct sdhci_of_data sdhci_esdhc; -extern struct sdhci_of_data sdhci_hlwd; - -#endif /* __SDHCI_OF_H */ diff --git a/drivers/mmc/host/sdhci-pci-data.c b/drivers/mmc/host/sdhci-pci-data.c new file mode 100644 index 00000000000..a611217769f --- /dev/null +++ b/drivers/mmc/host/sdhci-pci-data.c @@ -0,0 +1,5 @@ +#include <linux/module.h> +#include <linux/mmc/sdhci-pci-data.h> + +struct sdhci_pci_data *(*sdhci_pci_get_data)(struct pci_dev *pdev, int slotno); +EXPORT_SYMBOL_GPL(sdhci_pci_get_data); diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c new file mode 100644 index 00000000000..5670e381b0c --- /dev/null +++ b/drivers/mmc/host/sdhci-pci-o2micro.c @@ -0,0 +1,397 @@ +/* + * Copyright (C) 2013 BayHub Technology Ltd. + * + * Authors: Peter Guo <peter.guo@bayhubtech.com> + * Adam Lee <adam.lee@canonical.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/pci.h> + +#include "sdhci.h" +#include "sdhci-pci.h" +#include "sdhci-pci-o2micro.h" + +static void o2_pci_set_baseclk(struct sdhci_pci_chip *chip, u32 value) +{ + u32 scratch_32; + pci_read_config_dword(chip->pdev, + O2_SD_PLL_SETTING, &scratch_32); + + scratch_32 &= 0x0000FFFF; + scratch_32 |= value; + + pci_write_config_dword(chip->pdev, + O2_SD_PLL_SETTING, scratch_32); +} + +static void o2_pci_led_enable(struct sdhci_pci_chip *chip) +{ + int ret; + u32 scratch_32; + + /* Set led of SD host function enable */ + ret = pci_read_config_dword(chip->pdev, + O2_SD_FUNC_REG0, &scratch_32); + if (ret) + return; + + scratch_32 &= ~O2_SD_FREG0_LEDOFF; + pci_write_config_dword(chip->pdev, + O2_SD_FUNC_REG0, scratch_32); + + ret = pci_read_config_dword(chip->pdev, + O2_SD_TEST_REG, &scratch_32); + if (ret) + return; + + scratch_32 |= O2_SD_LED_ENABLE; + pci_write_config_dword(chip->pdev, + O2_SD_TEST_REG, scratch_32); + +} + +void sdhci_pci_o2_fujin2_pci_init(struct sdhci_pci_chip *chip) +{ + u32 scratch_32; + int ret; + /* Improve write performance for SD3.0 */ + ret = pci_read_config_dword(chip->pdev, O2_SD_DEV_CTRL, &scratch_32); + if (ret) + return; + scratch_32 &= ~((1 << 12) | (1 << 13) | (1 << 14)); + pci_write_config_dword(chip->pdev, O2_SD_DEV_CTRL, scratch_32); + + /* Enable Link abnormal reset generating Reset */ + ret = pci_read_config_dword(chip->pdev, O2_SD_MISC_REG5, &scratch_32); + if (ret) + return; + scratch_32 &= ~((1 << 19) | (1 << 11)); + scratch_32 |= (1 << 10); + pci_write_config_dword(chip->pdev, O2_SD_MISC_REG5, scratch_32); + + /* set card power over current protection */ + ret = pci_read_config_dword(chip->pdev, O2_SD_TEST_REG, &scratch_32); + if (ret) + return; + scratch_32 |= (1 << 4); + pci_write_config_dword(chip->pdev, O2_SD_TEST_REG, scratch_32); + + /* adjust the output delay for SD mode */ + pci_write_config_dword(chip->pdev, O2_SD_DELAY_CTRL, 0x00002492); + + /* Set the output voltage setting of Aux 1.2v LDO */ + ret = pci_read_config_dword(chip->pdev, O2_SD_LD0_CTRL, &scratch_32); + if (ret) + return; + scratch_32 &= ~(3 << 12); + pci_write_config_dword(chip->pdev, O2_SD_LD0_CTRL, scratch_32); + + /* Set Max power supply capability of SD host */ + ret = pci_read_config_dword(chip->pdev, O2_SD_CAP_REG0, &scratch_32); + if (ret) + return; + scratch_32 &= ~(0x01FE); + scratch_32 |= 0x00CC; + pci_write_config_dword(chip->pdev, O2_SD_CAP_REG0, scratch_32); + /* Set DLL Tuning Window */ + ret = pci_read_config_dword(chip->pdev, + O2_SD_TUNING_CTRL, &scratch_32); + if (ret) + return; + scratch_32 &= ~(0x000000FF); + scratch_32 |= 0x00000066; + pci_write_config_dword(chip->pdev, O2_SD_TUNING_CTRL, scratch_32); + + /* Set UHS2 T_EIDLE */ + ret = pci_read_config_dword(chip->pdev, + O2_SD_UHS2_L1_CTRL, &scratch_32); + if (ret) + return; + scratch_32 &= ~(0x000000FC); + scratch_32 |= 0x00000084; + pci_write_config_dword(chip->pdev, O2_SD_UHS2_L1_CTRL, scratch_32); + + /* Set UHS2 Termination */ + ret = pci_read_config_dword(chip->pdev, O2_SD_FUNC_REG3, &scratch_32); + if (ret) + return; + scratch_32 &= ~((1 << 21) | (1 << 30)); + + /* Set RTD3 function disabled */ + scratch_32 |= ((1 << 29) | (1 << 28)); + pci_write_config_dword(chip->pdev, O2_SD_FUNC_REG3, scratch_32); + + /* Set L1 Entrance Timer */ + ret = pci_read_config_dword(chip->pdev, O2_SD_CAPS, &scratch_32); + if (ret) + return; + scratch_32 &= ~(0xf0000000); + scratch_32 |= 0x30000000; + pci_write_config_dword(chip->pdev, O2_SD_CAPS, scratch_32); + + ret = pci_read_config_dword(chip->pdev, + O2_SD_MISC_CTRL4, &scratch_32); + if (ret) + return; + scratch_32 &= ~(0x000f0000); + scratch_32 |= 0x00080000; + pci_write_config_dword(chip->pdev, O2_SD_MISC_CTRL4, scratch_32); +} +EXPORT_SYMBOL_GPL(sdhci_pci_o2_fujin2_pci_init); + +int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot) +{ + struct sdhci_pci_chip *chip; + struct sdhci_host *host; + u32 reg; + + chip = slot->chip; + host = slot->host; + switch (chip->pdev->device) { + case PCI_DEVICE_ID_O2_SDS0: + case PCI_DEVICE_ID_O2_SEABIRD0: + case PCI_DEVICE_ID_O2_SEABIRD1: + case PCI_DEVICE_ID_O2_SDS1: + case PCI_DEVICE_ID_O2_FUJIN2: + reg = sdhci_readl(host, O2_SD_VENDOR_SETTING); + if (reg & 0x1) + host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12; + + if (chip->pdev->device != PCI_DEVICE_ID_O2_FUJIN2) + break; + /* set dll watch dog timer */ + reg = sdhci_readl(host, O2_SD_VENDOR_SETTING2); + reg |= (1 << 12); + sdhci_writel(host, reg, O2_SD_VENDOR_SETTING2); + + break; + default: + break; + } + + return 0; +} +EXPORT_SYMBOL_GPL(sdhci_pci_o2_probe_slot); + +int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip) +{ + int ret; + u8 scratch; + u32 scratch_32; + + switch (chip->pdev->device) { + case PCI_DEVICE_ID_O2_8220: + case PCI_DEVICE_ID_O2_8221: + case PCI_DEVICE_ID_O2_8320: + case PCI_DEVICE_ID_O2_8321: + /* This extra setup is required due to broken ADMA. */ + ret = pci_read_config_byte(chip->pdev, + O2_SD_LOCK_WP, &scratch); + if (ret) + return ret; + scratch &= 0x7f; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); + + /* Set Multi 3 to VCC3V# */ + pci_write_config_byte(chip->pdev, O2_SD_MULTI_VCC3V, 0x08); + + /* Disable CLK_REQ# support after media DET */ + ret = pci_read_config_byte(chip->pdev, + O2_SD_CLKREQ, &scratch); + if (ret) + return ret; + scratch |= 0x20; + pci_write_config_byte(chip->pdev, O2_SD_CLKREQ, scratch); + + /* Choose capabilities, enable SDMA. We have to write 0x01 + * to the capabilities register first to unlock it. + */ + ret = pci_read_config_byte(chip->pdev, O2_SD_CAPS, &scratch); + if (ret) + return ret; + scratch |= 0x01; + pci_write_config_byte(chip->pdev, O2_SD_CAPS, scratch); + pci_write_config_byte(chip->pdev, O2_SD_CAPS, 0x73); + + /* Disable ADMA1/2 */ + pci_write_config_byte(chip->pdev, O2_SD_ADMA1, 0x39); + pci_write_config_byte(chip->pdev, O2_SD_ADMA2, 0x08); + + /* Disable the infinite transfer mode */ + ret = pci_read_config_byte(chip->pdev, + O2_SD_INF_MOD, &scratch); + if (ret) + return ret; + scratch |= 0x08; + pci_write_config_byte(chip->pdev, O2_SD_INF_MOD, scratch); + + /* Lock WP */ + ret = pci_read_config_byte(chip->pdev, + O2_SD_LOCK_WP, &scratch); + if (ret) + return ret; + scratch |= 0x80; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); + break; + case PCI_DEVICE_ID_O2_SDS0: + case PCI_DEVICE_ID_O2_SDS1: + case PCI_DEVICE_ID_O2_FUJIN2: + /* UnLock WP */ + ret = pci_read_config_byte(chip->pdev, + O2_SD_LOCK_WP, &scratch); + if (ret) + return ret; + + scratch &= 0x7f; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); + + /* DevId=8520 subId= 0x11 or 0x12 Type Chip support */ + if (chip->pdev->device == PCI_DEVICE_ID_O2_FUJIN2) { + ret = pci_read_config_dword(chip->pdev, + O2_SD_FUNC_REG0, + &scratch_32); + scratch_32 = ((scratch_32 & 0xFF000000) >> 24); + + /* Check Whether subId is 0x11 or 0x12 */ + if ((scratch_32 == 0x11) || (scratch_32 == 0x12)) { + scratch_32 = 0x2c280000; + + /* Set Base Clock to 208MZ */ + o2_pci_set_baseclk(chip, scratch_32); + ret = pci_read_config_dword(chip->pdev, + O2_SD_FUNC_REG4, + &scratch_32); + + /* Enable Base Clk setting change */ + scratch_32 |= O2_SD_FREG4_ENABLE_CLK_SET; + pci_write_config_dword(chip->pdev, + O2_SD_FUNC_REG4, + scratch_32); + + /* Set Tuning Window to 4 */ + pci_write_config_byte(chip->pdev, + O2_SD_TUNING_CTRL, 0x44); + + break; + } + } + + /* Enable 8520 led function */ + o2_pci_led_enable(chip); + + /* Set timeout CLK */ + ret = pci_read_config_dword(chip->pdev, + O2_SD_CLK_SETTING, &scratch_32); + if (ret) + return ret; + + scratch_32 &= ~(0xFF00); + scratch_32 |= 0x07E0C800; + pci_write_config_dword(chip->pdev, + O2_SD_CLK_SETTING, scratch_32); + + ret = pci_read_config_dword(chip->pdev, + O2_SD_CLKREQ, &scratch_32); + if (ret) + return ret; + scratch_32 |= 0x3; + pci_write_config_dword(chip->pdev, O2_SD_CLKREQ, scratch_32); + + ret = pci_read_config_dword(chip->pdev, + O2_SD_PLL_SETTING, &scratch_32); + if (ret) + return ret; + + scratch_32 &= ~(0x1F3F070E); + scratch_32 |= 0x18270106; + pci_write_config_dword(chip->pdev, + O2_SD_PLL_SETTING, scratch_32); + + /* Disable UHS1 funciton */ + ret = pci_read_config_dword(chip->pdev, + O2_SD_CAP_REG2, &scratch_32); + if (ret) + return ret; + scratch_32 &= ~(0xE0); + pci_write_config_dword(chip->pdev, + O2_SD_CAP_REG2, scratch_32); + + if (chip->pdev->device == PCI_DEVICE_ID_O2_FUJIN2) + sdhci_pci_o2_fujin2_pci_init(chip); + + /* Lock WP */ + ret = pci_read_config_byte(chip->pdev, + O2_SD_LOCK_WP, &scratch); + if (ret) + return ret; + scratch |= 0x80; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); + break; + case PCI_DEVICE_ID_O2_SEABIRD0: + case PCI_DEVICE_ID_O2_SEABIRD1: + /* UnLock WP */ + ret = pci_read_config_byte(chip->pdev, + O2_SD_LOCK_WP, &scratch); + if (ret) + return ret; + + scratch &= 0x7f; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); + + ret = pci_read_config_dword(chip->pdev, + O2_SD_PLL_SETTING, &scratch_32); + + if ((scratch_32 & 0xff000000) == 0x01000000) { + scratch_32 &= 0x0000FFFF; + scratch_32 |= 0x1F340000; + + pci_write_config_dword(chip->pdev, + O2_SD_PLL_SETTING, scratch_32); + } else { + scratch_32 &= 0x0000FFFF; + scratch_32 |= 0x2c280000; + + pci_write_config_dword(chip->pdev, + O2_SD_PLL_SETTING, scratch_32); + + ret = pci_read_config_dword(chip->pdev, + O2_SD_FUNC_REG4, + &scratch_32); + scratch_32 |= (1 << 22); + pci_write_config_dword(chip->pdev, + O2_SD_FUNC_REG4, scratch_32); + } + + /* Set Tuning Windows to 5 */ + pci_write_config_byte(chip->pdev, + O2_SD_TUNING_CTRL, 0x55); + /* Lock WP */ + ret = pci_read_config_byte(chip->pdev, + O2_SD_LOCK_WP, &scratch); + if (ret) + return ret; + scratch |= 0x80; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); + break; + } + + return 0; +} +EXPORT_SYMBOL_GPL(sdhci_pci_o2_probe); + +int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip) +{ + sdhci_pci_o2_probe(chip); + return 0; +} +EXPORT_SYMBOL_GPL(sdhci_pci_o2_resume); diff --git a/drivers/mmc/host/sdhci-pci-o2micro.h b/drivers/mmc/host/sdhci-pci-o2micro.h new file mode 100644 index 00000000000..f7ffc908d9a --- /dev/null +++ b/drivers/mmc/host/sdhci-pci-o2micro.h @@ -0,0 +1,75 @@ +/* + * Copyright (C) 2013 BayHub Technology Ltd. + * + * Authors: Peter Guo <peter.guo@bayhubtech.com> + * Adam Lee <adam.lee@canonical.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __SDHCI_PCI_O2MICRO_H +#define __SDHCI_PCI_O2MICRO_H + +#include "sdhci-pci.h" + +/* + * O2Micro device IDs + */ + +#define PCI_DEVICE_ID_O2_SDS0 0x8420 +#define PCI_DEVICE_ID_O2_SDS1 0x8421 +#define PCI_DEVICE_ID_O2_FUJIN2 0x8520 +#define PCI_DEVICE_ID_O2_SEABIRD0 0x8620 +#define PCI_DEVICE_ID_O2_SEABIRD1 0x8621 + +/* + * O2Micro device registers + */ + +#define O2_SD_MISC_REG5 0x64 +#define O2_SD_LD0_CTRL 0x68 +#define O2_SD_DEV_CTRL 0x88 +#define O2_SD_LOCK_WP 0xD3 +#define O2_SD_TEST_REG 0xD4 +#define O2_SD_FUNC_REG0 0xDC +#define O2_SD_MULTI_VCC3V 0xEE +#define O2_SD_CLKREQ 0xEC +#define O2_SD_CAPS 0xE0 +#define O2_SD_ADMA1 0xE2 +#define O2_SD_ADMA2 0xE7 +#define O2_SD_INF_MOD 0xF1 +#define O2_SD_MISC_CTRL4 0xFC +#define O2_SD_TUNING_CTRL 0x300 +#define O2_SD_PLL_SETTING 0x304 +#define O2_SD_CLK_SETTING 0x328 +#define O2_SD_CAP_REG2 0x330 +#define O2_SD_CAP_REG0 0x334 +#define O2_SD_UHS1_CAP_SETTING 0x33C +#define O2_SD_DELAY_CTRL 0x350 +#define O2_SD_UHS2_L1_CTRL 0x35C +#define O2_SD_FUNC_REG3 0x3E0 +#define O2_SD_FUNC_REG4 0x3E4 +#define O2_SD_LED_ENABLE BIT(6) +#define O2_SD_FREG0_LEDOFF BIT(13) +#define O2_SD_FREG4_ENABLE_CLK_SET BIT(22) + +#define O2_SD_VENDOR_SETTING 0x110 +#define O2_SD_VENDOR_SETTING2 0x1C8 + +extern void sdhci_pci_o2_fujin2_pci_init(struct sdhci_pci_chip *chip); + +extern int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot); + +extern int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip); + +extern int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip); + +#endif /* __SDHCI_PCI_O2MICRO_H */ diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index 55746bac2f4..52c42fcc284 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -14,65 +14,21 @@ #include <linux/delay.h> #include <linux/highmem.h> +#include <linux/module.h> #include <linux/pci.h> #include <linux/dma-mapping.h> #include <linux/slab.h> #include <linux/device.h> - #include <linux/mmc/host.h> - -#include <asm/scatterlist.h> -#include <asm/io.h> +#include <linux/scatterlist.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/pm_runtime.h> +#include <linux/mmc/sdhci-pci-data.h> #include "sdhci.h" - -/* - * PCI registers - */ - -#define PCI_SDHCI_IFPIO 0x00 -#define PCI_SDHCI_IFDMA 0x01 -#define PCI_SDHCI_IFVENDOR 0x02 - -#define PCI_SLOT_INFO 0x40 /* 8 bits */ -#define PCI_SLOT_INFO_SLOTS(x) ((x >> 4) & 7) -#define PCI_SLOT_INFO_FIRST_BAR_MASK 0x07 - -#define MAX_SLOTS 8 - -struct sdhci_pci_chip; -struct sdhci_pci_slot; - -struct sdhci_pci_fixes { - unsigned int quirks; - - int (*probe)(struct sdhci_pci_chip*); - - int (*probe_slot)(struct sdhci_pci_slot*); - void (*remove_slot)(struct sdhci_pci_slot*, int); - - int (*suspend)(struct sdhci_pci_chip*, - pm_message_t); - int (*resume)(struct sdhci_pci_chip*); -}; - -struct sdhci_pci_slot { - struct sdhci_pci_chip *chip; - struct sdhci_host *host; - - int pci_bar; -}; - -struct sdhci_pci_chip { - struct pci_dev *pdev; - - unsigned int quirks; - const struct sdhci_pci_fixes *fixes; - - int num_slots; /* Slots on controller */ - struct sdhci_pci_slot *slots[MAX_SLOTS]; /* Pointers to host slots */ -}; - +#include "sdhci-pci.h" +#include "sdhci-pci-o2micro.h" /*****************************************************************************\ * * @@ -99,6 +55,7 @@ static int ricoh_mmc_probe_slot(struct sdhci_pci_slot *slot) SDHCI_TIMEOUT_CLK_UNIT | SDHCI_CAN_VDD_330 | + SDHCI_CAN_DO_HISPD | SDHCI_CAN_DO_SDMA; return 0; } @@ -142,40 +99,232 @@ static const struct sdhci_pci_fixes sdhci_ene_714 = { static const struct sdhci_pci_fixes sdhci_cafe = { .quirks = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER | SDHCI_QUIRK_NO_BUSY_IRQ | + SDHCI_QUIRK_BROKEN_CARD_DETECTION | SDHCI_QUIRK_BROKEN_TIMEOUT_VAL, }; +static int mrst_hc_probe_slot(struct sdhci_pci_slot *slot) +{ + slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA; + return 0; +} + /* * ADMA operation is disabled for Moorestown platform due to * hardware bugs. */ -static int mrst_hc1_probe(struct sdhci_pci_chip *chip) +static int mrst_hc_probe(struct sdhci_pci_chip *chip) { /* - * slots number is fixed here for MRST as SDIO3 is never used and has - * hardware bugs. + * slots number is fixed here for MRST as SDIO3/5 are never used and + * have hardware bugs. */ chip->num_slots = 1; return 0; } +static int pch_hc_probe_slot(struct sdhci_pci_slot *slot) +{ + slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA; + return 0; +} + +#ifdef CONFIG_PM_RUNTIME + +static irqreturn_t sdhci_pci_sd_cd(int irq, void *dev_id) +{ + struct sdhci_pci_slot *slot = dev_id; + struct sdhci_host *host = slot->host; + + mmc_detect_change(host->mmc, msecs_to_jiffies(200)); + return IRQ_HANDLED; +} + +static void sdhci_pci_add_own_cd(struct sdhci_pci_slot *slot) +{ + int err, irq, gpio = slot->cd_gpio; + + slot->cd_gpio = -EINVAL; + slot->cd_irq = -EINVAL; + + if (!gpio_is_valid(gpio)) + return; + + err = gpio_request(gpio, "sd_cd"); + if (err < 0) + goto out; + + err = gpio_direction_input(gpio); + if (err < 0) + goto out_free; + + irq = gpio_to_irq(gpio); + if (irq < 0) + goto out_free; + + err = request_irq(irq, sdhci_pci_sd_cd, IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, "sd_cd", slot); + if (err) + goto out_free; + + slot->cd_gpio = gpio; + slot->cd_irq = irq; + + return; + +out_free: + gpio_free(gpio); +out: + dev_warn(&slot->chip->pdev->dev, "failed to setup card detect wake up\n"); +} + +static void sdhci_pci_remove_own_cd(struct sdhci_pci_slot *slot) +{ + if (slot->cd_irq >= 0) + free_irq(slot->cd_irq, slot); + if (gpio_is_valid(slot->cd_gpio)) + gpio_free(slot->cd_gpio); +} + +#else + +static inline void sdhci_pci_add_own_cd(struct sdhci_pci_slot *slot) +{ +} + +static inline void sdhci_pci_remove_own_cd(struct sdhci_pci_slot *slot) +{ +} + +#endif + +static int mfd_emmc_probe_slot(struct sdhci_pci_slot *slot) +{ + slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE; + slot->host->mmc->caps2 |= MMC_CAP2_BOOTPART_NOACC | + MMC_CAP2_HC_ERASE_SZ; + return 0; +} + +static int mfd_sdio_probe_slot(struct sdhci_pci_slot *slot) +{ + slot->host->mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_NONREMOVABLE; + return 0; +} + static const struct sdhci_pci_fixes sdhci_intel_mrst_hc0 = { .quirks = SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_NO_HISPD_BIT, + .probe_slot = mrst_hc_probe_slot, }; -static const struct sdhci_pci_fixes sdhci_intel_mrst_hc1 = { +static const struct sdhci_pci_fixes sdhci_intel_mrst_hc1_hc2 = { .quirks = SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_NO_HISPD_BIT, - .probe = mrst_hc1_probe, + .probe = mrst_hc_probe, }; static const struct sdhci_pci_fixes sdhci_intel_mfd_sd = { .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, + .allow_runtime_pm = true, + .own_cd_for_runtime_pm = true, +}; + +static const struct sdhci_pci_fixes sdhci_intel_mfd_sdio = { + .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, + .quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON, + .allow_runtime_pm = true, + .probe_slot = mfd_sdio_probe_slot, +}; + +static const struct sdhci_pci_fixes sdhci_intel_mfd_emmc = { + .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, + .allow_runtime_pm = true, + .probe_slot = mfd_emmc_probe_slot, +}; + +static const struct sdhci_pci_fixes sdhci_intel_pch_sdio = { + .quirks = SDHCI_QUIRK_BROKEN_ADMA, + .probe_slot = pch_hc_probe_slot, }; -static const struct sdhci_pci_fixes sdhci_intel_mfd_emmc_sdio = { +static void sdhci_pci_int_hw_reset(struct sdhci_host *host) +{ + u8 reg; + + reg = sdhci_readb(host, SDHCI_POWER_CONTROL); + reg |= 0x10; + sdhci_writeb(host, reg, SDHCI_POWER_CONTROL); + /* For eMMC, minimum is 1us but give it 9us for good measure */ + udelay(9); + reg &= ~0x10; + sdhci_writeb(host, reg, SDHCI_POWER_CONTROL); + /* For eMMC, minimum is 200us but give it 300us for good measure */ + usleep_range(300, 1000); +} + +static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot) +{ + slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE | + MMC_CAP_HW_RESET; + slot->host->mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ; + slot->hw_reset = sdhci_pci_int_hw_reset; + return 0; +} + +static int byt_sdio_probe_slot(struct sdhci_pci_slot *slot) +{ + slot->host->mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_NONREMOVABLE; + return 0; +} + +static const struct sdhci_pci_fixes sdhci_intel_byt_emmc = { + .allow_runtime_pm = true, + .probe_slot = byt_emmc_probe_slot, +}; + +static const struct sdhci_pci_fixes sdhci_intel_byt_sdio = { + .quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON, + .allow_runtime_pm = true, + .probe_slot = byt_sdio_probe_slot, +}; + +static const struct sdhci_pci_fixes sdhci_intel_byt_sd = { + .quirks2 = SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON, + .allow_runtime_pm = true, + .own_cd_for_runtime_pm = true, +}; + +/* Define Host controllers for Intel Merrifield platform */ +#define INTEL_MRFL_EMMC_0 0 +#define INTEL_MRFL_EMMC_1 1 + +static int intel_mrfl_mmc_probe_slot(struct sdhci_pci_slot *slot) +{ + if ((PCI_FUNC(slot->chip->pdev->devfn) != INTEL_MRFL_EMMC_0) && + (PCI_FUNC(slot->chip->pdev->devfn) != INTEL_MRFL_EMMC_1)) + /* SD support is not ready yet */ + return -ENODEV; + + slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE | + MMC_CAP_1_8V_DDR; + + return 0; +} + +static const struct sdhci_pci_fixes sdhci_intel_mrfl_mmc = { .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, + .quirks2 = SDHCI_QUIRK2_BROKEN_HS200, + .probe_slot = intel_mrfl_mmc_probe_slot, }; +/* O2Micro extra registers */ +#define O2_SD_LOCK_WP 0xD3 +#define O2_SD_MULTI_VCC3V 0xEE +#define O2_SD_CLKREQ 0xEC +#define O2_SD_CAPS 0xE0 +#define O2_SD_ADMA1 0xE2 +#define O2_SD_ADMA2 0xE7 +#define O2_SD_INF_MOD 0xF1 + static int jmicron_pmos(struct sdhci_pci_chip *chip, int on) { u8 scratch; @@ -204,6 +353,7 @@ static int jmicron_pmos(struct sdhci_pci_chip *chip, int on) static int jmicron_probe(struct sdhci_pci_chip *chip) { int ret; + u16 mmcdev = 0; if (chip->pdev->revision == 0) { chip->quirks |= SDHCI_QUIRK_32BIT_DMA_ADDR | @@ -225,12 +375,17 @@ static int jmicron_probe(struct sdhci_pci_chip *chip) * 2. The MMC interface has a lower subfunction number * than the SD interface. */ - if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_SD) { + if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_SD) + mmcdev = PCI_DEVICE_ID_JMICRON_JMB38X_MMC; + else if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_SD) + mmcdev = PCI_DEVICE_ID_JMICRON_JMB388_ESD; + + if (mmcdev) { struct pci_dev *sd_dev; sd_dev = NULL; while ((sd_dev = pci_get_device(PCI_VENDOR_ID_JMICRON, - PCI_DEVICE_ID_JMICRON_JMB38X_MMC, sd_dev)) != NULL) { + mmcdev, sd_dev)) != NULL) { if ((PCI_SLOT(chip->pdev->devfn) == PCI_SLOT(sd_dev->devfn)) && (chip->pdev->bus == sd_dev->bus)) @@ -255,6 +410,11 @@ static int jmicron_probe(struct sdhci_pci_chip *chip) return ret; } + /* quirk for unsable RO-detection on JM388 chips */ + if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_SD || + chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD) + chip->quirks |= SDHCI_QUIRK_UNSTABLE_RO_DETECT; + return 0; } @@ -290,13 +450,25 @@ static int jmicron_probe_slot(struct sdhci_pci_slot *slot) slot->host->quirks |= SDHCI_QUIRK_BROKEN_ADMA; } + /* JM388 MMC doesn't support 1.8V while SD supports it */ + if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD) { + slot->host->ocr_avail_sd = MMC_VDD_32_33 | MMC_VDD_33_34 | + MMC_VDD_29_30 | MMC_VDD_30_31 | + MMC_VDD_165_195; /* allow 1.8V */ + slot->host->ocr_avail_mmc = MMC_VDD_32_33 | MMC_VDD_33_34 | + MMC_VDD_29_30 | MMC_VDD_30_31; /* no 1.8V for MMC */ + } + /* * The secondary interface requires a bit set to get the * interrupts. */ - if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC) + if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC || + slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD) jmicron_enable_mmc(slot->host, 1); + slot->host->mmc->caps |= MMC_CAP_BUS_WIDTH_TEST; + return 0; } @@ -305,16 +477,18 @@ static void jmicron_remove_slot(struct sdhci_pci_slot *slot, int dead) if (dead) return; - if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC) + if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC || + slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD) jmicron_enable_mmc(slot->host, 0); } -static int jmicron_suspend(struct sdhci_pci_chip *chip, pm_message_t state) +static int jmicron_suspend(struct sdhci_pci_chip *chip) { int i; - if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC) { - for (i = 0;i < chip->num_slots;i++) + if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC || + chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD) { + for (i = 0; i < chip->num_slots; i++) jmicron_enable_mmc(chip->slots[i]->host, 0); } @@ -325,8 +499,9 @@ static int jmicron_resume(struct sdhci_pci_chip *chip) { int ret, i; - if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC) { - for (i = 0;i < chip->num_slots;i++) + if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC || + chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD) { + for (i = 0; i < chip->num_slots; i++) jmicron_enable_mmc(chip->slots[i]->host, 1); } @@ -339,6 +514,13 @@ static int jmicron_resume(struct sdhci_pci_chip *chip) return 0; } +static const struct sdhci_pci_fixes sdhci_o2 = { + .probe = sdhci_pci_o2_probe, + .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, + .probe_slot = sdhci_pci_o2_probe_slot, + .resume = sdhci_pci_o2_resume, +}; + static const struct sdhci_pci_fixes sdhci_jmicron = { .probe = jmicron_probe, @@ -428,7 +610,19 @@ static const struct sdhci_pci_fixes sdhci_via = { .probe = via_probe, }; -static const struct pci_device_id pci_ids[] __devinitdata = { +static int rtsx_probe_slot(struct sdhci_pci_slot *slot) +{ + slot->host->mmc->caps2 |= MMC_CAP2_HS200; + return 0; +} + +static const struct sdhci_pci_fixes sdhci_rtsx = { + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | + SDHCI_QUIRK2_BROKEN_DDR50, + .probe_slot = rtsx_probe_slot, +}; + +static const struct pci_device_id pci_ids[] = { { .vendor = PCI_VENDOR_ID_RICOH, .device = PCI_DEVICE_ID_RICOH_R5C822, @@ -454,6 +648,14 @@ static const struct pci_device_id pci_ids[] __devinitdata = { }, { + .vendor = PCI_VENDOR_ID_RICOH, + .device = 0xe823, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_ricoh_mmc, + }, + + { .vendor = PCI_VENDOR_ID_ENE, .device = PCI_DEVICE_ID_ENE_CB712_SD, .subvendor = PCI_ANY_ID, @@ -510,6 +712,22 @@ static const struct pci_device_id pci_ids[] __devinitdata = { }, { + .vendor = PCI_VENDOR_ID_JMICRON, + .device = PCI_DEVICE_ID_JMICRON_JMB388_SD, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_jmicron, + }, + + { + .vendor = PCI_VENDOR_ID_JMICRON, + .device = PCI_DEVICE_ID_JMICRON_JMB388_ESD, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_jmicron, + }, + + { .vendor = PCI_VENDOR_ID_SYSKONNECT, .device = 0x8000, .subvendor = PCI_ANY_ID, @@ -526,6 +744,14 @@ static const struct pci_device_id pci_ids[] __devinitdata = { }, { + .vendor = PCI_VENDOR_ID_REALTEK, + .device = 0x5250, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_rtsx, + }, + + { .vendor = PCI_VENDOR_ID_INTEL, .device = PCI_DEVICE_ID_INTEL_MRST_SD0, .subvendor = PCI_ANY_ID, @@ -538,7 +764,15 @@ static const struct pci_device_id pci_ids[] __devinitdata = { .device = PCI_DEVICE_ID_INTEL_MRST_SD1, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .driver_data = (kernel_ulong_t)&sdhci_intel_mrst_hc1, + .driver_data = (kernel_ulong_t)&sdhci_intel_mrst_hc1_hc2, + }, + + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_MRST_SD2, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_intel_mrst_hc1_hc2, }, { @@ -554,7 +788,7 @@ static const struct pci_device_id pci_ids[] __devinitdata = { .device = PCI_DEVICE_ID_INTEL_MFD_SDIO1, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .driver_data = (kernel_ulong_t)&sdhci_intel_mfd_emmc_sdio, + .driver_data = (kernel_ulong_t)&sdhci_intel_mfd_sdio, }, { @@ -562,7 +796,7 @@ static const struct pci_device_id pci_ids[] __devinitdata = { .device = PCI_DEVICE_ID_INTEL_MFD_SDIO2, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .driver_data = (kernel_ulong_t)&sdhci_intel_mfd_emmc_sdio, + .driver_data = (kernel_ulong_t)&sdhci_intel_mfd_sdio, }, { @@ -570,7 +804,7 @@ static const struct pci_device_id pci_ids[] __devinitdata = { .device = PCI_DEVICE_ID_INTEL_MFD_EMMC0, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .driver_data = (kernel_ulong_t)&sdhci_intel_mfd_emmc_sdio, + .driver_data = (kernel_ulong_t)&sdhci_intel_mfd_emmc, }, { @@ -578,7 +812,183 @@ static const struct pci_device_id pci_ids[] __devinitdata = { .device = PCI_DEVICE_ID_INTEL_MFD_EMMC1, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .driver_data = (kernel_ulong_t)&sdhci_intel_mfd_emmc_sdio, + .driver_data = (kernel_ulong_t)&sdhci_intel_mfd_emmc, + }, + + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_PCH_SDIO0, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_intel_pch_sdio, + }, + + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_PCH_SDIO1, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_intel_pch_sdio, + }, + + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_BYT_EMMC, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_intel_byt_emmc, + }, + + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_BYT_SDIO, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_intel_byt_sdio, + }, + + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_BYT_SD, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_intel_byt_sd, + }, + + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_BYT_EMMC2, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_intel_byt_emmc, + }, + + + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_CLV_SDIO0, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_intel_mfd_sd, + }, + + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_CLV_SDIO1, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_intel_mfd_sdio, + }, + + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_CLV_SDIO2, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_intel_mfd_sdio, + }, + + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_CLV_EMMC0, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_intel_mfd_emmc, + }, + + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_CLV_EMMC1, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_intel_mfd_emmc, + }, + + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_MRFL_MMC, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_intel_mrfl_mmc, + }, + { + .vendor = PCI_VENDOR_ID_O2, + .device = PCI_DEVICE_ID_O2_8120, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_o2, + }, + + { + .vendor = PCI_VENDOR_ID_O2, + .device = PCI_DEVICE_ID_O2_8220, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_o2, + }, + + { + .vendor = PCI_VENDOR_ID_O2, + .device = PCI_DEVICE_ID_O2_8221, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_o2, + }, + + { + .vendor = PCI_VENDOR_ID_O2, + .device = PCI_DEVICE_ID_O2_8320, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_o2, + }, + + { + .vendor = PCI_VENDOR_ID_O2, + .device = PCI_DEVICE_ID_O2_8321, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_o2, + }, + + { + .vendor = PCI_VENDOR_ID_O2, + .device = PCI_DEVICE_ID_O2_FUJIN2, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_o2, + }, + + { + .vendor = PCI_VENDOR_ID_O2, + .device = PCI_DEVICE_ID_O2_SDS0, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_o2, + }, + + { + .vendor = PCI_VENDOR_ID_O2, + .device = PCI_DEVICE_ID_O2_SDS1, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_o2, + }, + + { + .vendor = PCI_VENDOR_ID_O2, + .device = PCI_DEVICE_ID_O2_SEABIRD0, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_o2, + }, + + { + .vendor = PCI_VENDOR_ID_O2, + .device = PCI_DEVICE_ID_O2_SEABIRD1, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_o2, }, { /* Generic SD host controller */ @@ -621,8 +1031,59 @@ static int sdhci_pci_enable_dma(struct sdhci_host *host) return 0; } -static struct sdhci_ops sdhci_pci_ops = { +static void sdhci_pci_set_bus_width(struct sdhci_host *host, int width) +{ + u8 ctrl; + + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); + + switch (width) { + case MMC_BUS_WIDTH_8: + ctrl |= SDHCI_CTRL_8BITBUS; + ctrl &= ~SDHCI_CTRL_4BITBUS; + break; + case MMC_BUS_WIDTH_4: + ctrl |= SDHCI_CTRL_4BITBUS; + ctrl &= ~SDHCI_CTRL_8BITBUS; + break; + default: + ctrl &= ~(SDHCI_CTRL_8BITBUS | SDHCI_CTRL_4BITBUS); + break; + } + + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); +} + +static void sdhci_pci_gpio_hw_reset(struct sdhci_host *host) +{ + struct sdhci_pci_slot *slot = sdhci_priv(host); + int rst_n_gpio = slot->rst_n_gpio; + + if (!gpio_is_valid(rst_n_gpio)) + return; + gpio_set_value_cansleep(rst_n_gpio, 0); + /* For eMMC, minimum is 1us but give it 10us for good measure */ + udelay(10); + gpio_set_value_cansleep(rst_n_gpio, 1); + /* For eMMC, minimum is 200us but give it 300us for good measure */ + usleep_range(300, 1000); +} + +static void sdhci_pci_hw_reset(struct sdhci_host *host) +{ + struct sdhci_pci_slot *slot = sdhci_priv(host); + + if (slot->hw_reset) + slot->hw_reset(host); +} + +static const struct sdhci_ops sdhci_pci_ops = { + .set_clock = sdhci_set_clock, .enable_dma = sdhci_pci_enable_dma, + .set_bus_width = sdhci_pci_set_bus_width, + .reset = sdhci_reset, + .set_uhs_signaling = sdhci_set_uhs_signaling, + .hw_reset = sdhci_pci_hw_reset, }; /*****************************************************************************\ @@ -633,10 +1094,12 @@ static struct sdhci_ops sdhci_pci_ops = { #ifdef CONFIG_PM -static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state) +static int sdhci_pci_suspend(struct device *dev) { + struct pci_dev *pdev = to_pci_dev(dev); struct sdhci_pci_chip *chip; struct sdhci_pci_slot *slot; + mmc_pm_flag_t slot_pm_flags; mmc_pm_flag_t pm_flags = 0; int i, ret; @@ -644,47 +1107,53 @@ static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state) if (!chip) return 0; - for (i = 0;i < chip->num_slots;i++) { + for (i = 0; i < chip->num_slots; i++) { slot = chip->slots[i]; if (!slot) continue; - ret = sdhci_suspend_host(slot->host, state); + ret = sdhci_suspend_host(slot->host); - if (ret) { - for (i--;i >= 0;i--) - sdhci_resume_host(chip->slots[i]->host); - return ret; - } + if (ret) + goto err_pci_suspend; + + slot_pm_flags = slot->host->mmc->pm_flags; + if (slot_pm_flags & MMC_PM_WAKE_SDIO_IRQ) + sdhci_enable_irq_wakeups(slot->host); - pm_flags |= slot->host->mmc->pm_flags; + pm_flags |= slot_pm_flags; } if (chip->fixes && chip->fixes->suspend) { - ret = chip->fixes->suspend(chip, state); - if (ret) { - for (i = chip->num_slots - 1;i >= 0;i--) - sdhci_resume_host(chip->slots[i]->host); - return ret; - } + ret = chip->fixes->suspend(chip); + if (ret) + goto err_pci_suspend; } pci_save_state(pdev); if (pm_flags & MMC_PM_KEEP_POWER) { - if (pm_flags & MMC_PM_WAKE_SDIO_IRQ) + if (pm_flags & MMC_PM_WAKE_SDIO_IRQ) { + pci_pme_active(pdev, true); pci_enable_wake(pdev, PCI_D3hot, 1); + } pci_set_power_state(pdev, PCI_D3hot); } else { - pci_enable_wake(pdev, pci_choose_state(pdev, state), 0); + pci_enable_wake(pdev, PCI_D3hot, 0); pci_disable_device(pdev); - pci_set_power_state(pdev, pci_choose_state(pdev, state)); + pci_set_power_state(pdev, PCI_D3hot); } return 0; + +err_pci_suspend: + while (--i >= 0) + sdhci_resume_host(chip->slots[i]->host); + return ret; } -static int sdhci_pci_resume (struct pci_dev *pdev) +static int sdhci_pci_resume(struct device *dev) { + struct pci_dev *pdev = to_pci_dev(dev); struct sdhci_pci_chip *chip; struct sdhci_pci_slot *slot; int i, ret; @@ -705,7 +1174,7 @@ static int sdhci_pci_resume (struct pci_dev *pdev) return ret; } - for (i = 0;i < chip->num_slots;i++) { + for (i = 0; i < chip->num_slots; i++) { slot = chip->slots[i]; if (!slot) continue; @@ -725,28 +1194,115 @@ static int sdhci_pci_resume (struct pci_dev *pdev) #endif /* CONFIG_PM */ +#ifdef CONFIG_PM_RUNTIME + +static int sdhci_pci_runtime_suspend(struct device *dev) +{ + struct pci_dev *pdev = container_of(dev, struct pci_dev, dev); + struct sdhci_pci_chip *chip; + struct sdhci_pci_slot *slot; + int i, ret; + + chip = pci_get_drvdata(pdev); + if (!chip) + return 0; + + for (i = 0; i < chip->num_slots; i++) { + slot = chip->slots[i]; + if (!slot) + continue; + + ret = sdhci_runtime_suspend_host(slot->host); + + if (ret) + goto err_pci_runtime_suspend; + } + + if (chip->fixes && chip->fixes->suspend) { + ret = chip->fixes->suspend(chip); + if (ret) + goto err_pci_runtime_suspend; + } + + return 0; + +err_pci_runtime_suspend: + while (--i >= 0) + sdhci_runtime_resume_host(chip->slots[i]->host); + return ret; +} + +static int sdhci_pci_runtime_resume(struct device *dev) +{ + struct pci_dev *pdev = container_of(dev, struct pci_dev, dev); + struct sdhci_pci_chip *chip; + struct sdhci_pci_slot *slot; + int i, ret; + + chip = pci_get_drvdata(pdev); + if (!chip) + return 0; + + if (chip->fixes && chip->fixes->resume) { + ret = chip->fixes->resume(chip); + if (ret) + return ret; + } + + for (i = 0; i < chip->num_slots; i++) { + slot = chip->slots[i]; + if (!slot) + continue; + + ret = sdhci_runtime_resume_host(slot->host); + if (ret) + return ret; + } + + return 0; +} + +static int sdhci_pci_runtime_idle(struct device *dev) +{ + return 0; +} + +#else + +#define sdhci_pci_runtime_suspend NULL +#define sdhci_pci_runtime_resume NULL +#define sdhci_pci_runtime_idle NULL + +#endif + +static const struct dev_pm_ops sdhci_pci_pm_ops = { + .suspend = sdhci_pci_suspend, + .resume = sdhci_pci_resume, + .runtime_suspend = sdhci_pci_runtime_suspend, + .runtime_resume = sdhci_pci_runtime_resume, + .runtime_idle = sdhci_pci_runtime_idle, +}; + /*****************************************************************************\ * * * Device probing/removal * * * \*****************************************************************************/ -static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot( - struct pci_dev *pdev, struct sdhci_pci_chip *chip, int bar) +static struct sdhci_pci_slot *sdhci_pci_probe_slot( + struct pci_dev *pdev, struct sdhci_pci_chip *chip, int first_bar, + int slotno) { struct sdhci_pci_slot *slot; struct sdhci_host *host; - - resource_size_t addr; - - int ret; + int ret, bar = first_bar + slotno; if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM)) { dev_err(&pdev->dev, "BAR %d is not iomem. Aborting.\n", bar); return ERR_PTR(-ENODEV); } - if (pci_resource_len(pdev, bar) != 0x100) { + if (pci_resource_len(pdev, bar) < 0x100) { dev_err(&pdev->dev, "Invalid iomem size. You may " "experience problems.\n"); } @@ -772,23 +1328,42 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot( slot->chip = chip; slot->host = host; slot->pci_bar = bar; + slot->rst_n_gpio = -EINVAL; + slot->cd_gpio = -EINVAL; + + /* Retrieve platform data if there is any */ + if (*sdhci_pci_get_data) + slot->data = sdhci_pci_get_data(pdev, slotno); + + if (slot->data) { + if (slot->data->setup) { + ret = slot->data->setup(slot->data); + if (ret) { + dev_err(&pdev->dev, "platform setup failed\n"); + goto free; + } + } + slot->rst_n_gpio = slot->data->rst_n_gpio; + slot->cd_gpio = slot->data->cd_gpio; + } host->hw_name = "PCI"; host->ops = &sdhci_pci_ops; host->quirks = chip->quirks; + host->quirks2 = chip->quirks2; host->irq = pdev->irq; ret = pci_request_region(pdev, bar, mmc_hostname(host->mmc)); if (ret) { dev_err(&pdev->dev, "cannot request region\n"); - goto free; + goto cleanup; } - addr = pci_resource_start(pdev, bar); host->ioaddr = pci_ioremap_bar(pdev, bar); if (!host->ioaddr) { dev_err(&pdev->dev, "failed to remap registers\n"); + ret = -ENOMEM; goto release; } @@ -798,15 +1373,42 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot( goto unmap; } + if (gpio_is_valid(slot->rst_n_gpio)) { + if (!gpio_request(slot->rst_n_gpio, "eMMC_reset")) { + gpio_direction_output(slot->rst_n_gpio, 1); + slot->host->mmc->caps |= MMC_CAP_HW_RESET; + slot->hw_reset = sdhci_pci_gpio_hw_reset; + } else { + dev_warn(&pdev->dev, "failed to request rst_n_gpio\n"); + slot->rst_n_gpio = -EINVAL; + } + } + host->mmc->pm_caps = MMC_PM_KEEP_POWER | MMC_PM_WAKE_SDIO_IRQ; + host->mmc->slotno = slotno; + host->mmc->caps2 |= MMC_CAP2_NO_PRESCAN_POWERUP; ret = sdhci_add_host(host); if (ret) goto remove; + sdhci_pci_add_own_cd(slot); + + /* + * Check if the chip needs a separate GPIO for card detect to wake up + * from runtime suspend. If it is not there, don't allow runtime PM. + * Note sdhci_pci_add_own_cd() sets slot->cd_gpio to -EINVAL on failure. + */ + if (chip->fixes && chip->fixes->own_cd_for_runtime_pm && + !gpio_is_valid(slot->cd_gpio)) + chip->allow_runtime_pm = false; + return slot; remove: + if (gpio_is_valid(slot->rst_n_gpio)) + gpio_free(slot->rst_n_gpio); + if (chip->fixes && chip->fixes->remove_slot) chip->fixes->remove_slot(slot, 0); @@ -816,6 +1418,10 @@ unmap: release: pci_release_region(pdev, bar); +cleanup: + if (slot->data && slot->data->cleanup) + slot->data->cleanup(slot->data); + free: sdhci_free_host(host); @@ -827,6 +1433,8 @@ static void sdhci_pci_remove_slot(struct sdhci_pci_slot *slot) int dead; u32 scratch; + sdhci_pci_remove_own_cd(slot); + dead = 0; scratch = readl(slot->host->ioaddr + SDHCI_INT_STATUS); if (scratch == (u32)-1) @@ -834,30 +1442,49 @@ static void sdhci_pci_remove_slot(struct sdhci_pci_slot *slot) sdhci_remove_host(slot->host, dead); + if (gpio_is_valid(slot->rst_n_gpio)) + gpio_free(slot->rst_n_gpio); + if (slot->chip->fixes && slot->chip->fixes->remove_slot) slot->chip->fixes->remove_slot(slot, dead); + if (slot->data && slot->data->cleanup) + slot->data->cleanup(slot->data); + pci_release_region(slot->chip->pdev, slot->pci_bar); sdhci_free_host(slot->host); } -static int __devinit sdhci_pci_probe(struct pci_dev *pdev, +static void sdhci_pci_runtime_pm_allow(struct device *dev) +{ + pm_runtime_put_noidle(dev); + pm_runtime_allow(dev); + pm_runtime_set_autosuspend_delay(dev, 50); + pm_runtime_use_autosuspend(dev); + pm_suspend_ignore_children(dev, 1); +} + +static void sdhci_pci_runtime_pm_forbid(struct device *dev) +{ + pm_runtime_forbid(dev); + pm_runtime_get_noresume(dev); +} + +static int sdhci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { struct sdhci_pci_chip *chip; struct sdhci_pci_slot *slot; - u8 slots, rev, first_bar; + u8 slots, first_bar; int ret, i; BUG_ON(pdev == NULL); BUG_ON(ent == NULL); - pci_read_config_byte(pdev, PCI_CLASS_REVISION, &rev); - dev_info(&pdev->dev, "SDHCI controller found [%04x:%04x] (rev %x)\n", - (int)pdev->vendor, (int)pdev->device, (int)rev); + (int)pdev->vendor, (int)pdev->device, (int)pdev->revision); ret = pci_read_config_byte(pdev, PCI_SLOT_INFO, &slots); if (ret) @@ -892,9 +1519,12 @@ static int __devinit sdhci_pci_probe(struct pci_dev *pdev, } chip->pdev = pdev; - chip->fixes = (const struct sdhci_pci_fixes*)ent->driver_data; - if (chip->fixes) + chip->fixes = (const struct sdhci_pci_fixes *)ent->driver_data; + if (chip->fixes) { chip->quirks = chip->fixes->quirks; + chip->quirks2 = chip->fixes->quirks2; + chip->allow_runtime_pm = chip->fixes->allow_runtime_pm; + } chip->num_slots = slots; pci_set_drvdata(pdev, chip); @@ -907,10 +1537,10 @@ static int __devinit sdhci_pci_probe(struct pci_dev *pdev, slots = chip->num_slots; /* Quirk may have changed this */ - for (i = 0;i < slots;i++) { - slot = sdhci_pci_probe_slot(pdev, chip, first_bar + i); + for (i = 0; i < slots; i++) { + slot = sdhci_pci_probe_slot(pdev, chip, first_bar, i); if (IS_ERR(slot)) { - for (i--;i >= 0;i--) + for (i--; i >= 0; i--) sdhci_pci_remove_slot(chip->slots[i]); ret = PTR_ERR(slot); goto free; @@ -919,6 +1549,9 @@ static int __devinit sdhci_pci_probe(struct pci_dev *pdev, chip->slots[i] = slot; } + if (chip->allow_runtime_pm) + sdhci_pci_runtime_pm_allow(&pdev->dev); + return 0; free: @@ -930,7 +1563,7 @@ err: return ret; } -static void __devexit sdhci_pci_remove(struct pci_dev *pdev) +static void sdhci_pci_remove(struct pci_dev *pdev) { int i; struct sdhci_pci_chip *chip; @@ -938,7 +1571,10 @@ static void __devexit sdhci_pci_remove(struct pci_dev *pdev) chip = pci_get_drvdata(pdev); if (chip) { - for (i = 0;i < chip->num_slots; i++) + if (chip->allow_runtime_pm) + sdhci_pci_runtime_pm_forbid(&pdev->dev); + + for (i = 0; i < chip->num_slots; i++) sdhci_pci_remove_slot(chip->slots[i]); pci_set_drvdata(pdev, NULL); @@ -949,32 +1585,16 @@ static void __devexit sdhci_pci_remove(struct pci_dev *pdev) } static struct pci_driver sdhci_driver = { - .name = "sdhci-pci", + .name = "sdhci-pci", .id_table = pci_ids, - .probe = sdhci_pci_probe, - .remove = __devexit_p(sdhci_pci_remove), - .suspend = sdhci_pci_suspend, - .resume = sdhci_pci_resume, + .probe = sdhci_pci_probe, + .remove = sdhci_pci_remove, + .driver = { + .pm = &sdhci_pci_pm_ops + }, }; -/*****************************************************************************\ - * * - * Driver init/exit * - * * -\*****************************************************************************/ - -static int __init sdhci_drv_init(void) -{ - return pci_register_driver(&sdhci_driver); -} - -static void __exit sdhci_drv_exit(void) -{ - pci_unregister_driver(&sdhci_driver); -} - -module_init(sdhci_drv_init); -module_exit(sdhci_drv_exit); +module_pci_driver(sdhci_driver); MODULE_AUTHOR("Pierre Ossman <pierre@ossman.eu>"); MODULE_DESCRIPTION("Secure Digital Host Controller Interface PCI driver"); diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h new file mode 100644 index 00000000000..6d718719659 --- /dev/null +++ b/drivers/mmc/host/sdhci-pci.h @@ -0,0 +1,78 @@ +#ifndef __SDHCI_PCI_H +#define __SDHCI_PCI_H + +/* + * PCI device IDs + */ + +#define PCI_DEVICE_ID_INTEL_PCH_SDIO0 0x8809 +#define PCI_DEVICE_ID_INTEL_PCH_SDIO1 0x880a +#define PCI_DEVICE_ID_INTEL_BYT_EMMC 0x0f14 +#define PCI_DEVICE_ID_INTEL_BYT_SDIO 0x0f15 +#define PCI_DEVICE_ID_INTEL_BYT_SD 0x0f16 +#define PCI_DEVICE_ID_INTEL_BYT_EMMC2 0x0f50 +#define PCI_DEVICE_ID_INTEL_MRFL_MMC 0x1190 +#define PCI_DEVICE_ID_INTEL_CLV_SDIO0 0x08f9 +#define PCI_DEVICE_ID_INTEL_CLV_SDIO1 0x08fa +#define PCI_DEVICE_ID_INTEL_CLV_SDIO2 0x08fb +#define PCI_DEVICE_ID_INTEL_CLV_EMMC0 0x08e5 +#define PCI_DEVICE_ID_INTEL_CLV_EMMC1 0x08e6 + +/* + * PCI registers + */ + +#define PCI_SDHCI_IFPIO 0x00 +#define PCI_SDHCI_IFDMA 0x01 +#define PCI_SDHCI_IFVENDOR 0x02 + +#define PCI_SLOT_INFO 0x40 /* 8 bits */ +#define PCI_SLOT_INFO_SLOTS(x) ((x >> 4) & 7) +#define PCI_SLOT_INFO_FIRST_BAR_MASK 0x07 + +#define MAX_SLOTS 8 + +struct sdhci_pci_chip; +struct sdhci_pci_slot; + +struct sdhci_pci_fixes { + unsigned int quirks; + unsigned int quirks2; + bool allow_runtime_pm; + bool own_cd_for_runtime_pm; + + int (*probe) (struct sdhci_pci_chip *); + + int (*probe_slot) (struct sdhci_pci_slot *); + void (*remove_slot) (struct sdhci_pci_slot *, int); + + int (*suspend) (struct sdhci_pci_chip *); + int (*resume) (struct sdhci_pci_chip *); +}; + +struct sdhci_pci_slot { + struct sdhci_pci_chip *chip; + struct sdhci_host *host; + struct sdhci_pci_data *data; + + int pci_bar; + int rst_n_gpio; + int cd_gpio; + int cd_irq; + + void (*hw_reset)(struct sdhci_host *host); +}; + +struct sdhci_pci_chip { + struct pci_dev *pdev; + + unsigned int quirks; + unsigned int quirks2; + bool allow_runtime_pm; + const struct sdhci_pci_fixes *fixes; + + int num_slots; /* Slots on controller */ + struct sdhci_pci_slot *slots[MAX_SLOTS]; /* Pointers to host slots */ +}; + +#endif /* __SDHCI_PCI_H */ diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c index 0502f89f662..7e834fb78f4 100644 --- a/drivers/mmc/host/sdhci-pltfm.c +++ b/drivers/mmc/host/sdhci-pltfm.c @@ -2,6 +2,12 @@ * sdhci-pltfm.c Support for SDHCI platform devices * Copyright (c) 2009 Intel Corporation * + * Copyright (c) 2007, 2011 Freescale Semiconductor, Inc. + * Copyright (c) 2009 MontaVista Software, Inc. + * + * Authors: Xiaobo Xie <X.Xie@freescale.com> + * Anton Vorontsov <avorontsov@ru.mvista.com> + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -22,48 +28,105 @@ * Inspired by sdhci-pci.c, by Pierre Ossman */ -#include <linux/delay.h> -#include <linux/highmem.h> -#include <linux/mod_devicetable.h> -#include <linux/platform_device.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/of.h> +#ifdef CONFIG_PPC +#include <asm/machdep.h> +#endif +#include "sdhci-pltfm.h" -#include <linux/mmc/host.h> +unsigned int sdhci_pltfm_clk_get_max_clock(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); -#include <linux/io.h> -#include <linux/mmc/sdhci-pltfm.h> + return clk_get_rate(pltfm_host->clk); +} +EXPORT_SYMBOL_GPL(sdhci_pltfm_clk_get_max_clock); -#include "sdhci.h" -#include "sdhci-pltfm.h" +static const struct sdhci_ops sdhci_pltfm_ops = { + .set_clock = sdhci_set_clock, + .set_bus_width = sdhci_set_bus_width, + .reset = sdhci_reset, + .set_uhs_signaling = sdhci_set_uhs_signaling, +}; + +#ifdef CONFIG_OF +static bool sdhci_of_wp_inverted(struct device_node *np) +{ + if (of_get_property(np, "sdhci,wp-inverted", NULL) || + of_get_property(np, "wp-inverted", NULL)) + return true; -/*****************************************************************************\ - * * - * SDHCI core callbacks * - * * -\*****************************************************************************/ + /* Old device trees don't have the wp-inverted property. */ +#ifdef CONFIG_PPC + return machine_is(mpc837x_rdb) || machine_is(mpc837x_mds); +#else + return false; +#endif /* CONFIG_PPC */ +} -static struct sdhci_ops sdhci_pltfm_ops = { -}; +void sdhci_get_of_property(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct sdhci_host *host = platform_get_drvdata(pdev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + const __be32 *clk; + u32 bus_width; + int size; + + if (of_device_is_available(np)) { + if (of_get_property(np, "sdhci,auto-cmd12", NULL)) + host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12; + + if (of_get_property(np, "sdhci,1-bit-only", NULL) || + (of_property_read_u32(np, "bus-width", &bus_width) == 0 && + bus_width == 1)) + host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA; + + if (sdhci_of_wp_inverted(np)) + host->quirks |= SDHCI_QUIRK_INVERTED_WRITE_PROTECT; -/*****************************************************************************\ - * * - * Device probing/removal * - * * -\*****************************************************************************/ + if (of_get_property(np, "broken-cd", NULL)) + host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION; -static int __devinit sdhci_pltfm_probe(struct platform_device *pdev) + if (of_get_property(np, "no-1-8-v", NULL)) + host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; + + if (of_device_is_compatible(np, "fsl,p2020-rev1-esdhc")) + host->quirks |= SDHCI_QUIRK_BROKEN_DMA; + + if (of_device_is_compatible(np, "fsl,p2020-esdhc") || + of_device_is_compatible(np, "fsl,p1010-esdhc") || + of_device_is_compatible(np, "fsl,t4240-esdhc") || + of_device_is_compatible(np, "fsl,mpc8536-esdhc")) + host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; + + clk = of_get_property(np, "clock-frequency", &size); + if (clk && size == sizeof(*clk) && *clk) + pltfm_host->clock = be32_to_cpup(clk); + + if (of_find_property(np, "keep-power-in-suspend", NULL)) + host->mmc->pm_caps |= MMC_PM_KEEP_POWER; + + if (of_find_property(np, "enable-sdio-wakeup", NULL)) + host->mmc->pm_caps |= MMC_PM_WAKE_SDIO_IRQ; + } +} +#else +void sdhci_get_of_property(struct platform_device *pdev) {} +#endif /* CONFIG_OF */ +EXPORT_SYMBOL_GPL(sdhci_get_of_property); + +struct sdhci_host *sdhci_pltfm_init(struct platform_device *pdev, + const struct sdhci_pltfm_data *pdata, + size_t priv_size) { - const struct platform_device_id *platid = platform_get_device_id(pdev); - struct sdhci_pltfm_data *pdata; struct sdhci_host *host; - struct sdhci_pltfm_host *pltfm_host; + struct device_node *np = pdev->dev.of_node; struct resource *iomem; int ret; - if (platid && platid->driver_data) - pdata = (void *)platid->driver_data; - else - pdata = pdev->dev.platform_data; - iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!iomem) { ret = -ENOMEM; @@ -71,29 +134,31 @@ static int __devinit sdhci_pltfm_probe(struct platform_device *pdev) } if (resource_size(iomem) < 0x100) - dev_err(&pdev->dev, "Invalid iomem size. You may " - "experience problems.\n"); + dev_err(&pdev->dev, "Invalid iomem size!\n"); /* Some PCI-based MFD need the parent here */ - if (pdev->dev.parent != &platform_bus) - host = sdhci_alloc_host(pdev->dev.parent, sizeof(*pltfm_host)); + if (pdev->dev.parent != &platform_bus && !np) + host = sdhci_alloc_host(pdev->dev.parent, + sizeof(struct sdhci_pltfm_host) + priv_size); else - host = sdhci_alloc_host(&pdev->dev, sizeof(*pltfm_host)); + host = sdhci_alloc_host(&pdev->dev, + sizeof(struct sdhci_pltfm_host) + priv_size); if (IS_ERR(host)) { ret = PTR_ERR(host); goto err; } - pltfm_host = sdhci_priv(host); - - host->hw_name = "platform"; + host->hw_name = dev_name(&pdev->dev); if (pdata && pdata->ops) host->ops = pdata->ops; else host->ops = &sdhci_pltfm_ops; - if (pdata) + if (pdata) { host->quirks = pdata->quirks; + host->quirks2 = pdata->quirks2; + } + host->irq = platform_get_irq(pdev, 0); if (!request_mem_region(iomem->start, resource_size(iomem), @@ -110,120 +175,108 @@ static int __devinit sdhci_pltfm_probe(struct platform_device *pdev) goto err_remap; } - if (pdata && pdata->init) { - ret = pdata->init(host, pdata); - if (ret) - goto err_plat_init; - } - - ret = sdhci_add_host(host); - if (ret) - goto err_add_host; + /* + * Some platforms need to probe the controller to be able to + * determine which caps should be used. + */ + if (host->ops && host->ops->platform_init) + host->ops->platform_init(host); platform_set_drvdata(pdev, host); - return 0; + return host; -err_add_host: - if (pdata && pdata->exit) - pdata->exit(host); -err_plat_init: - iounmap(host->ioaddr); err_remap: release_mem_region(iomem->start, resource_size(iomem)); err_request: sdhci_free_host(host); err: - printk(KERN_ERR"Probing of sdhci-pltfm failed: %d\n", ret); - return ret; + dev_err(&pdev->dev, "%s failed %d\n", __func__, ret); + return ERR_PTR(ret); } +EXPORT_SYMBOL_GPL(sdhci_pltfm_init); -static int __devexit sdhci_pltfm_remove(struct platform_device *pdev) +void sdhci_pltfm_free(struct platform_device *pdev) { - struct sdhci_pltfm_data *pdata = pdev->dev.platform_data; struct sdhci_host *host = platform_get_drvdata(pdev); struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - int dead; - u32 scratch; - - dead = 0; - scratch = readl(host->ioaddr + SDHCI_INT_STATUS); - if (scratch == (u32)-1) - dead = 1; - sdhci_remove_host(host, dead); - if (pdata && pdata->exit) - pdata->exit(host); iounmap(host->ioaddr); release_mem_region(iomem->start, resource_size(iomem)); sdhci_free_host(host); - platform_set_drvdata(pdev, NULL); +} +EXPORT_SYMBOL_GPL(sdhci_pltfm_free); - return 0; +int sdhci_pltfm_register(struct platform_device *pdev, + const struct sdhci_pltfm_data *pdata, + size_t priv_size) +{ + struct sdhci_host *host; + int ret = 0; + + host = sdhci_pltfm_init(pdev, pdata, priv_size); + if (IS_ERR(host)) + return PTR_ERR(host); + + sdhci_get_of_property(pdev); + + ret = sdhci_add_host(host); + if (ret) + sdhci_pltfm_free(pdev); + + return ret; } +EXPORT_SYMBOL_GPL(sdhci_pltfm_register); -static const struct platform_device_id sdhci_pltfm_ids[] = { - { "sdhci", }, -#ifdef CONFIG_MMC_SDHCI_CNS3XXX - { "sdhci-cns3xxx", (kernel_ulong_t)&sdhci_cns3xxx_pdata }, -#endif -#ifdef CONFIG_MMC_SDHCI_ESDHC_IMX - { "sdhci-esdhc-imx", (kernel_ulong_t)&sdhci_esdhc_imx_pdata }, -#endif - { }, -}; -MODULE_DEVICE_TABLE(platform, sdhci_pltfm_ids); +int sdhci_pltfm_unregister(struct platform_device *pdev) +{ + struct sdhci_host *host = platform_get_drvdata(pdev); + int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff); + + sdhci_remove_host(host, dead); + sdhci_pltfm_free(pdev); + + return 0; +} +EXPORT_SYMBOL_GPL(sdhci_pltfm_unregister); #ifdef CONFIG_PM -static int sdhci_pltfm_suspend(struct platform_device *dev, pm_message_t state) +int sdhci_pltfm_suspend(struct device *dev) { - struct sdhci_host *host = platform_get_drvdata(dev); + struct sdhci_host *host = dev_get_drvdata(dev); - return sdhci_suspend_host(host, state); + return sdhci_suspend_host(host); } +EXPORT_SYMBOL_GPL(sdhci_pltfm_suspend); -static int sdhci_pltfm_resume(struct platform_device *dev) +int sdhci_pltfm_resume(struct device *dev) { - struct sdhci_host *host = platform_get_drvdata(dev); + struct sdhci_host *host = dev_get_drvdata(dev); return sdhci_resume_host(host); } -#else -#define sdhci_pltfm_suspend NULL -#define sdhci_pltfm_resume NULL -#endif /* CONFIG_PM */ +EXPORT_SYMBOL_GPL(sdhci_pltfm_resume); -static struct platform_driver sdhci_pltfm_driver = { - .driver = { - .name = "sdhci", - .owner = THIS_MODULE, - }, - .probe = sdhci_pltfm_probe, - .remove = __devexit_p(sdhci_pltfm_remove), - .id_table = sdhci_pltfm_ids, +const struct dev_pm_ops sdhci_pltfm_pmops = { .suspend = sdhci_pltfm_suspend, .resume = sdhci_pltfm_resume, }; +EXPORT_SYMBOL_GPL(sdhci_pltfm_pmops); +#endif /* CONFIG_PM */ -/*****************************************************************************\ - * * - * Driver init/exit * - * * -\*****************************************************************************/ - -static int __init sdhci_drv_init(void) +static int __init sdhci_pltfm_drv_init(void) { - return platform_driver_register(&sdhci_pltfm_driver); + pr_info("sdhci-pltfm: SDHCI platform and OF driver helper\n"); + + return 0; } +module_init(sdhci_pltfm_drv_init); -static void __exit sdhci_drv_exit(void) +static void __exit sdhci_pltfm_drv_exit(void) { - platform_driver_unregister(&sdhci_pltfm_driver); } +module_exit(sdhci_pltfm_drv_exit); -module_init(sdhci_drv_init); -module_exit(sdhci_drv_exit); - -MODULE_DESCRIPTION("Secure Digital Host Controller Interface platform driver"); -MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>"); +MODULE_DESCRIPTION("SDHCI platform and OF driver helper"); +MODULE_AUTHOR("Intel Corporation"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/sdhci-pltfm.h b/drivers/mmc/host/sdhci-pltfm.h index c1bfe48af56..04bc2481e5c 100644 --- a/drivers/mmc/host/sdhci-pltfm.h +++ b/drivers/mmc/host/sdhci-pltfm.h @@ -12,15 +12,111 @@ #define _DRIVERS_MMC_SDHCI_PLTFM_H #include <linux/clk.h> -#include <linux/types.h> -#include <linux/mmc/sdhci-pltfm.h> +#include <linux/platform_device.h> +#include "sdhci.h" + +struct sdhci_pltfm_data { + const struct sdhci_ops *ops; + unsigned int quirks; + unsigned int quirks2; +}; struct sdhci_pltfm_host { struct clk *clk; - u32 scratchpad; /* to handle quirks across io-accessor calls */ + void *priv; /* to handle quirks across io-accessor calls */ + + /* migrate from sdhci_of_host */ + unsigned int clock; + u16 xfer_mode_shadow; + + unsigned long private[0] ____cacheline_aligned; }; -extern struct sdhci_pltfm_data sdhci_cns3xxx_pdata; -extern struct sdhci_pltfm_data sdhci_esdhc_imx_pdata; +#ifdef CONFIG_MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER +/* + * These accessors are designed for big endian hosts doing I/O to + * little endian controllers incorporating a 32-bit hardware byte swapper. + */ +static inline u32 sdhci_be32bs_readl(struct sdhci_host *host, int reg) +{ + return in_be32(host->ioaddr + reg); +} + +static inline u16 sdhci_be32bs_readw(struct sdhci_host *host, int reg) +{ + return in_be16(host->ioaddr + (reg ^ 0x2)); +} + +static inline u8 sdhci_be32bs_readb(struct sdhci_host *host, int reg) +{ + return in_8(host->ioaddr + (reg ^ 0x3)); +} + +static inline void sdhci_be32bs_writel(struct sdhci_host *host, + u32 val, int reg) +{ + out_be32(host->ioaddr + reg, val); +} + +static inline void sdhci_be32bs_writew(struct sdhci_host *host, + u16 val, int reg) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + int base = reg & ~0x3; + int shift = (reg & 0x2) * 8; + + switch (reg) { + case SDHCI_TRANSFER_MODE: + /* + * Postpone this write, we must do it together with a + * command write that is down below. + */ + pltfm_host->xfer_mode_shadow = val; + return; + case SDHCI_COMMAND: + sdhci_be32bs_writel(host, + val << 16 | pltfm_host->xfer_mode_shadow, + SDHCI_TRANSFER_MODE); + return; + } + clrsetbits_be32(host->ioaddr + base, 0xffff << shift, val << shift); +} + +static inline void sdhci_be32bs_writeb(struct sdhci_host *host, u8 val, int reg) +{ + int base = reg & ~0x3; + int shift = (reg & 0x3) * 8; + + clrsetbits_be32(host->ioaddr + base , 0xff << shift, val << shift); +} +#endif /* CONFIG_MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER */ + +extern void sdhci_get_of_property(struct platform_device *pdev); + +extern struct sdhci_host *sdhci_pltfm_init(struct platform_device *pdev, + const struct sdhci_pltfm_data *pdata, + size_t priv_size); +extern void sdhci_pltfm_free(struct platform_device *pdev); + +extern int sdhci_pltfm_register(struct platform_device *pdev, + const struct sdhci_pltfm_data *pdata, + size_t priv_size); +extern int sdhci_pltfm_unregister(struct platform_device *pdev); + +extern unsigned int sdhci_pltfm_clk_get_max_clock(struct sdhci_host *host); + +static inline void *sdhci_pltfm_priv(struct sdhci_pltfm_host *host) +{ + return (void *)host->private; +} + +#ifdef CONFIG_PM +extern int sdhci_pltfm_suspend(struct device *dev); +extern int sdhci_pltfm_resume(struct device *dev); +extern const struct dev_pm_ops sdhci_pltfm_pmops; +#define SDHCI_PLTFM_PMOPS (&sdhci_pltfm_pmops) +#else +#define SDHCI_PLTFM_PMOPS NULL +#endif #endif /* _DRIVERS_MMC_SDHCI_PLTFM_H */ diff --git a/drivers/mmc/host/sdhci-pxa.c b/drivers/mmc/host/sdhci-pxa.c deleted file mode 100644 index fc406ac5d19..00000000000 --- a/drivers/mmc/host/sdhci-pxa.c +++ /dev/null @@ -1,253 +0,0 @@ -/* linux/drivers/mmc/host/sdhci-pxa.c - * - * Copyright (C) 2010 Marvell International Ltd. - * Zhangfei Gao <zhangfei.gao@marvell.com> - * Kevin Wang <dwang4@marvell.com> - * Mingwei Wang <mwwang@marvell.com> - * Philip Rakity <prakity@marvell.com> - * Mark Brown <markb@marvell.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/* Supports: - * SDHCI support for MMP2/PXA910/PXA168 - * - * Refer to sdhci-s3c.c. - */ - -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/mmc/host.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/err.h> -#include <plat/sdhci.h> -#include "sdhci.h" - -#define DRIVER_NAME "sdhci-pxa" - -#define SD_FIFO_PARAM 0x104 -#define DIS_PAD_SD_CLK_GATE 0x400 - -struct sdhci_pxa { - struct sdhci_host *host; - struct sdhci_pxa_platdata *pdata; - struct clk *clk; - struct resource *res; - - u8 clk_enable; -}; - -/*****************************************************************************\ - * * - * SDHCI core callbacks * - * * -\*****************************************************************************/ -static void set_clock(struct sdhci_host *host, unsigned int clock) -{ - struct sdhci_pxa *pxa = sdhci_priv(host); - u32 tmp = 0; - - if (clock == 0) { - if (pxa->clk_enable) { - clk_disable(pxa->clk); - pxa->clk_enable = 0; - } - } else { - if (0 == pxa->clk_enable) { - if (pxa->pdata->flags & PXA_FLAG_DISABLE_CLOCK_GATING) { - tmp = readl(host->ioaddr + SD_FIFO_PARAM); - tmp |= DIS_PAD_SD_CLK_GATE; - writel(tmp, host->ioaddr + SD_FIFO_PARAM); - } - clk_enable(pxa->clk); - pxa->clk_enable = 1; - } - } -} - -static struct sdhci_ops sdhci_pxa_ops = { - .set_clock = set_clock, -}; - -/*****************************************************************************\ - * * - * Device probing/removal * - * * -\*****************************************************************************/ - -static int __devinit sdhci_pxa_probe(struct platform_device *pdev) -{ - struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data; - struct device *dev = &pdev->dev; - struct sdhci_host *host = NULL; - struct resource *iomem = NULL; - struct sdhci_pxa *pxa = NULL; - int ret, irq; - - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(dev, "no irq specified\n"); - return irq; - } - - iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!iomem) { - dev_err(dev, "no memory specified\n"); - return -ENOENT; - } - - host = sdhci_alloc_host(&pdev->dev, sizeof(struct sdhci_pxa)); - if (IS_ERR(host)) { - dev_err(dev, "failed to alloc host\n"); - return PTR_ERR(host); - } - - pxa = sdhci_priv(host); - pxa->host = host; - pxa->pdata = pdata; - pxa->clk_enable = 0; - - pxa->clk = clk_get(dev, "PXA-SDHCLK"); - if (IS_ERR(pxa->clk)) { - dev_err(dev, "failed to get io clock\n"); - ret = PTR_ERR(pxa->clk); - goto out; - } - - pxa->res = request_mem_region(iomem->start, resource_size(iomem), - mmc_hostname(host->mmc)); - if (!pxa->res) { - dev_err(&pdev->dev, "cannot request region\n"); - ret = -EBUSY; - goto out; - } - - host->ioaddr = ioremap(iomem->start, resource_size(iomem)); - if (!host->ioaddr) { - dev_err(&pdev->dev, "failed to remap registers\n"); - ret = -ENOMEM; - goto out; - } - - host->hw_name = "MMC"; - host->ops = &sdhci_pxa_ops; - host->irq = irq; - host->quirks = SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; - - if (pdata->quirks) - host->quirks |= pdata->quirks; - - ret = sdhci_add_host(host); - if (ret) { - dev_err(&pdev->dev, "failed to add host\n"); - goto out; - } - - if (pxa->pdata->max_speed) - host->mmc->f_max = pxa->pdata->max_speed; - - platform_set_drvdata(pdev, host); - - return 0; -out: - if (host) { - clk_put(pxa->clk); - if (host->ioaddr) - iounmap(host->ioaddr); - if (pxa->res) - release_mem_region(pxa->res->start, - resource_size(pxa->res)); - sdhci_free_host(host); - } - - return ret; -} - -static int __devexit sdhci_pxa_remove(struct platform_device *pdev) -{ - struct sdhci_host *host = platform_get_drvdata(pdev); - struct sdhci_pxa *pxa = sdhci_priv(host); - int dead = 0; - u32 scratch; - - if (host) { - scratch = readl(host->ioaddr + SDHCI_INT_STATUS); - if (scratch == (u32)-1) - dead = 1; - - sdhci_remove_host(host, dead); - - if (host->ioaddr) - iounmap(host->ioaddr); - if (pxa->res) - release_mem_region(pxa->res->start, - resource_size(pxa->res)); - if (pxa->clk_enable) { - clk_disable(pxa->clk); - pxa->clk_enable = 0; - } - clk_put(pxa->clk); - - sdhci_free_host(host); - platform_set_drvdata(pdev, NULL); - } - - return 0; -} - -#ifdef CONFIG_PM -static int sdhci_pxa_suspend(struct platform_device *dev, pm_message_t state) -{ - struct sdhci_host *host = platform_get_drvdata(dev); - - return sdhci_suspend_host(host, state); -} - -static int sdhci_pxa_resume(struct platform_device *dev) -{ - struct sdhci_host *host = platform_get_drvdata(dev); - - return sdhci_resume_host(host); -} -#else -#define sdhci_pxa_suspend NULL -#define sdhci_pxa_resume NULL -#endif - -static struct platform_driver sdhci_pxa_driver = { - .probe = sdhci_pxa_probe, - .remove = __devexit_p(sdhci_pxa_remove), - .suspend = sdhci_pxa_suspend, - .resume = sdhci_pxa_resume, - .driver = { - .name = DRIVER_NAME, - .owner = THIS_MODULE, - }, -}; - -/*****************************************************************************\ - * * - * Driver init/exit * - * * -\*****************************************************************************/ - -static int __init sdhci_pxa_init(void) -{ - return platform_driver_register(&sdhci_pxa_driver); -} - -static void __exit sdhci_pxa_exit(void) -{ - platform_driver_unregister(&sdhci_pxa_driver); -} - -module_init(sdhci_pxa_init); -module_exit(sdhci_pxa_exit); - -MODULE_DESCRIPTION("SDH controller driver for PXA168/PXA910/MMP2"); -MODULE_AUTHOR("Zhangfei Gao <zhangfei.gao@marvell.com>"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/sdhci-pxav2.c b/drivers/mmc/host/sdhci-pxav2.c new file mode 100644 index 00000000000..3c0f3c0a1cc --- /dev/null +++ b/drivers/mmc/host/sdhci-pxav2.c @@ -0,0 +1,279 @@ +/* + * Copyright (C) 2010 Marvell International Ltd. + * Zhangfei Gao <zhangfei.gao@marvell.com> + * Kevin Wang <dwang4@marvell.com> + * Jun Nie <njun@marvell.com> + * Qiming Wu <wuqm@marvell.com> + * Philip Rakity <prakity@marvell.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/mmc/card.h> +#include <linux/mmc/host.h> +#include <linux/platform_data/pxa_sdhci.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/of_device.h> + +#include "sdhci.h" +#include "sdhci-pltfm.h" + +#define SD_FIFO_PARAM 0xe0 +#define DIS_PAD_SD_CLK_GATE 0x0400 /* Turn on/off Dynamic SD Clock Gating */ +#define CLK_GATE_ON 0x0200 /* Disable/enable Clock Gate */ +#define CLK_GATE_CTL 0x0100 /* Clock Gate Control */ +#define CLK_GATE_SETTING_BITS (DIS_PAD_SD_CLK_GATE | \ + CLK_GATE_ON | CLK_GATE_CTL) + +#define SD_CLOCK_BURST_SIZE_SETUP 0xe6 +#define SDCLK_SEL_SHIFT 8 +#define SDCLK_SEL_MASK 0x3 +#define SDCLK_DELAY_SHIFT 10 +#define SDCLK_DELAY_MASK 0x3c + +#define SD_CE_ATA_2 0xea +#define MMC_CARD 0x1000 +#define MMC_WIDTH 0x0100 + +static void pxav2_reset(struct sdhci_host *host, u8 mask) +{ + struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc)); + struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data; + + sdhci_reset(host, mask); + + if (mask == SDHCI_RESET_ALL) { + u16 tmp = 0; + + /* + * tune timing of read data/command when crc error happen + * no performance impact + */ + if (pdata && pdata->clk_delay_sel == 1) { + tmp = readw(host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP); + + tmp &= ~(SDCLK_DELAY_MASK << SDCLK_DELAY_SHIFT); + tmp |= (pdata->clk_delay_cycles & SDCLK_DELAY_MASK) + << SDCLK_DELAY_SHIFT; + tmp &= ~(SDCLK_SEL_MASK << SDCLK_SEL_SHIFT); + tmp |= (1 & SDCLK_SEL_MASK) << SDCLK_SEL_SHIFT; + + writew(tmp, host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP); + } + + if (pdata && (pdata->flags & PXA_FLAG_ENABLE_CLOCK_GATING)) { + tmp = readw(host->ioaddr + SD_FIFO_PARAM); + tmp &= ~CLK_GATE_SETTING_BITS; + writew(tmp, host->ioaddr + SD_FIFO_PARAM); + } else { + tmp = readw(host->ioaddr + SD_FIFO_PARAM); + tmp &= ~CLK_GATE_SETTING_BITS; + tmp |= CLK_GATE_SETTING_BITS; + writew(tmp, host->ioaddr + SD_FIFO_PARAM); + } + } +} + +static void pxav2_mmc_set_bus_width(struct sdhci_host *host, int width) +{ + u8 ctrl; + u16 tmp; + + ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL); + tmp = readw(host->ioaddr + SD_CE_ATA_2); + if (width == MMC_BUS_WIDTH_8) { + ctrl &= ~SDHCI_CTRL_4BITBUS; + tmp |= MMC_CARD | MMC_WIDTH; + } else { + tmp &= ~(MMC_CARD | MMC_WIDTH); + if (width == MMC_BUS_WIDTH_4) + ctrl |= SDHCI_CTRL_4BITBUS; + else + ctrl &= ~SDHCI_CTRL_4BITBUS; + } + writew(tmp, host->ioaddr + SD_CE_ATA_2); + writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL); +} + +static const struct sdhci_ops pxav2_sdhci_ops = { + .set_clock = sdhci_set_clock, + .get_max_clock = sdhci_pltfm_clk_get_max_clock, + .set_bus_width = pxav2_mmc_set_bus_width, + .reset = pxav2_reset, + .set_uhs_signaling = sdhci_set_uhs_signaling, +}; + +#ifdef CONFIG_OF +static const struct of_device_id sdhci_pxav2_of_match[] = { + { + .compatible = "mrvl,pxav2-mmc", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, sdhci_pxav2_of_match); + +static struct sdhci_pxa_platdata *pxav2_get_mmc_pdata(struct device *dev) +{ + struct sdhci_pxa_platdata *pdata; + struct device_node *np = dev->of_node; + u32 bus_width; + u32 clk_delay_cycles; + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return NULL; + + if (of_find_property(np, "non-removable", NULL)) + pdata->flags |= PXA_FLAG_CARD_PERMANENT; + + of_property_read_u32(np, "bus-width", &bus_width); + if (bus_width == 8) + pdata->flags |= PXA_FLAG_SD_8_BIT_CAPABLE_SLOT; + + of_property_read_u32(np, "mrvl,clk-delay-cycles", &clk_delay_cycles); + if (clk_delay_cycles > 0) { + pdata->clk_delay_sel = 1; + pdata->clk_delay_cycles = clk_delay_cycles; + } + + return pdata; +} +#else +static inline struct sdhci_pxa_platdata *pxav2_get_mmc_pdata(struct device *dev) +{ + return NULL; +} +#endif + +static int sdhci_pxav2_probe(struct platform_device *pdev) +{ + struct sdhci_pltfm_host *pltfm_host; + struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data; + struct device *dev = &pdev->dev; + struct sdhci_host *host = NULL; + struct sdhci_pxa *pxa = NULL; + const struct of_device_id *match; + + int ret; + struct clk *clk; + + pxa = kzalloc(sizeof(struct sdhci_pxa), GFP_KERNEL); + if (!pxa) + return -ENOMEM; + + host = sdhci_pltfm_init(pdev, NULL, 0); + if (IS_ERR(host)) { + kfree(pxa); + return PTR_ERR(host); + } + pltfm_host = sdhci_priv(host); + pltfm_host->priv = pxa; + + clk = clk_get(dev, "PXA-SDHCLK"); + if (IS_ERR(clk)) { + dev_err(dev, "failed to get io clock\n"); + ret = PTR_ERR(clk); + goto err_clk_get; + } + pltfm_host->clk = clk; + clk_prepare_enable(clk); + + host->quirks = SDHCI_QUIRK_BROKEN_ADMA + | SDHCI_QUIRK_BROKEN_TIMEOUT_VAL + | SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN; + + match = of_match_device(of_match_ptr(sdhci_pxav2_of_match), &pdev->dev); + if (match) { + pdata = pxav2_get_mmc_pdata(dev); + } + if (pdata) { + if (pdata->flags & PXA_FLAG_CARD_PERMANENT) { + /* on-chip device */ + host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION; + host->mmc->caps |= MMC_CAP_NONREMOVABLE; + } + + /* If slot design supports 8 bit data, indicate this to MMC. */ + if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT) + host->mmc->caps |= MMC_CAP_8_BIT_DATA; + + if (pdata->quirks) + host->quirks |= pdata->quirks; + if (pdata->host_caps) + host->mmc->caps |= pdata->host_caps; + if (pdata->pm_caps) + host->mmc->pm_caps |= pdata->pm_caps; + } + + host->ops = &pxav2_sdhci_ops; + + ret = sdhci_add_host(host); + if (ret) { + dev_err(&pdev->dev, "failed to add host\n"); + goto err_add_host; + } + + platform_set_drvdata(pdev, host); + + return 0; + +err_add_host: + clk_disable_unprepare(clk); + clk_put(clk); +err_clk_get: + sdhci_pltfm_free(pdev); + kfree(pxa); + return ret; +} + +static int sdhci_pxav2_remove(struct platform_device *pdev) +{ + struct sdhci_host *host = platform_get_drvdata(pdev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_pxa *pxa = pltfm_host->priv; + + sdhci_remove_host(host, 1); + + clk_disable_unprepare(pltfm_host->clk); + clk_put(pltfm_host->clk); + sdhci_pltfm_free(pdev); + kfree(pxa); + + return 0; +} + +static struct platform_driver sdhci_pxav2_driver = { + .driver = { + .name = "sdhci-pxav2", + .owner = THIS_MODULE, +#ifdef CONFIG_OF + .of_match_table = sdhci_pxav2_of_match, +#endif + .pm = SDHCI_PLTFM_PMOPS, + }, + .probe = sdhci_pxav2_probe, + .remove = sdhci_pxav2_remove, +}; + +module_platform_driver(sdhci_pxav2_driver); + +MODULE_DESCRIPTION("SDHCI driver for pxav2"); +MODULE_AUTHOR("Marvell International Ltd."); +MODULE_LICENSE("GPL v2"); + diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c new file mode 100644 index 00000000000..f4f12894756 --- /dev/null +++ b/drivers/mmc/host/sdhci-pxav3.c @@ -0,0 +1,514 @@ +/* + * Copyright (C) 2010 Marvell International Ltd. + * Zhangfei Gao <zhangfei.gao@marvell.com> + * Kevin Wang <dwang4@marvell.com> + * Mingwei Wang <mwwang@marvell.com> + * Philip Rakity <prakity@marvell.com> + * Mark Brown <markb@marvell.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#include <linux/err.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/mmc/card.h> +#include <linux/mmc/host.h> +#include <linux/mmc/slot-gpio.h> +#include <linux/platform_data/pxa_sdhci.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> +#include <linux/mbus.h> + +#include "sdhci.h" +#include "sdhci-pltfm.h" + +#define PXAV3_RPM_DELAY_MS 50 + +#define SD_CLOCK_BURST_SIZE_SETUP 0x10A +#define SDCLK_SEL 0x100 +#define SDCLK_DELAY_SHIFT 9 +#define SDCLK_DELAY_MASK 0x1f + +#define SD_CFG_FIFO_PARAM 0x100 +#define SDCFG_GEN_PAD_CLK_ON (1<<6) +#define SDCFG_GEN_PAD_CLK_CNT_MASK 0xFF +#define SDCFG_GEN_PAD_CLK_CNT_SHIFT 24 + +#define SD_SPI_MODE 0x108 +#define SD_CE_ATA_1 0x10C + +#define SD_CE_ATA_2 0x10E +#define SDCE_MISC_INT (1<<2) +#define SDCE_MISC_INT_EN (1<<1) + +/* + * These registers are relative to the second register region, for the + * MBus bridge. + */ +#define SDHCI_WINDOW_CTRL(i) (0x80 + ((i) << 3)) +#define SDHCI_WINDOW_BASE(i) (0x84 + ((i) << 3)) +#define SDHCI_MAX_WIN_NUM 8 + +static int mv_conf_mbus_windows(struct platform_device *pdev, + const struct mbus_dram_target_info *dram) +{ + int i; + void __iomem *regs; + struct resource *res; + + if (!dram) { + dev_err(&pdev->dev, "no mbus dram info\n"); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) { + dev_err(&pdev->dev, "cannot get mbus registers\n"); + return -EINVAL; + } + + regs = ioremap(res->start, resource_size(res)); + if (!regs) { + dev_err(&pdev->dev, "cannot map mbus registers\n"); + return -ENOMEM; + } + + for (i = 0; i < SDHCI_MAX_WIN_NUM; i++) { + writel(0, regs + SDHCI_WINDOW_CTRL(i)); + writel(0, regs + SDHCI_WINDOW_BASE(i)); + } + + for (i = 0; i < dram->num_cs; i++) { + const struct mbus_dram_window *cs = dram->cs + i; + + /* Write size, attributes and target id to control register */ + writel(((cs->size - 1) & 0xffff0000) | + (cs->mbus_attr << 8) | + (dram->mbus_dram_target_id << 4) | 1, + regs + SDHCI_WINDOW_CTRL(i)); + /* Write base address to base register */ + writel(cs->base, regs + SDHCI_WINDOW_BASE(i)); + } + + iounmap(regs); + + return 0; +} + +static void pxav3_reset(struct sdhci_host *host, u8 mask) +{ + struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc)); + struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data; + + sdhci_reset(host, mask); + + if (mask == SDHCI_RESET_ALL) { + /* + * tune timing of read data/command when crc error happen + * no performance impact + */ + if (pdata && 0 != pdata->clk_delay_cycles) { + u16 tmp; + + tmp = readw(host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP); + tmp |= (pdata->clk_delay_cycles & SDCLK_DELAY_MASK) + << SDCLK_DELAY_SHIFT; + tmp |= SDCLK_SEL; + writew(tmp, host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP); + } + } +} + +#define MAX_WAIT_COUNT 5 +static void pxav3_gen_init_74_clocks(struct sdhci_host *host, u8 power_mode) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_pxa *pxa = pltfm_host->priv; + u16 tmp; + int count; + + if (pxa->power_mode == MMC_POWER_UP + && power_mode == MMC_POWER_ON) { + + dev_dbg(mmc_dev(host->mmc), + "%s: slot->power_mode = %d," + "ios->power_mode = %d\n", + __func__, + pxa->power_mode, + power_mode); + + /* set we want notice of when 74 clocks are sent */ + tmp = readw(host->ioaddr + SD_CE_ATA_2); + tmp |= SDCE_MISC_INT_EN; + writew(tmp, host->ioaddr + SD_CE_ATA_2); + + /* start sending the 74 clocks */ + tmp = readw(host->ioaddr + SD_CFG_FIFO_PARAM); + tmp |= SDCFG_GEN_PAD_CLK_ON; + writew(tmp, host->ioaddr + SD_CFG_FIFO_PARAM); + + /* slowest speed is about 100KHz or 10usec per clock */ + udelay(740); + count = 0; + + while (count++ < MAX_WAIT_COUNT) { + if ((readw(host->ioaddr + SD_CE_ATA_2) + & SDCE_MISC_INT) == 0) + break; + udelay(10); + } + + if (count == MAX_WAIT_COUNT) + dev_warn(mmc_dev(host->mmc), "74 clock interrupt not cleared\n"); + + /* clear the interrupt bit if posted */ + tmp = readw(host->ioaddr + SD_CE_ATA_2); + tmp |= SDCE_MISC_INT; + writew(tmp, host->ioaddr + SD_CE_ATA_2); + } + pxa->power_mode = power_mode; +} + +static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs) +{ + u16 ctrl_2; + + /* + * Set V18_EN -- UHS modes do not work without this. + * does not change signaling voltage + */ + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + + /* Select Bus Speed Mode for host */ + ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; + switch (uhs) { + case MMC_TIMING_UHS_SDR12: + ctrl_2 |= SDHCI_CTRL_UHS_SDR12; + break; + case MMC_TIMING_UHS_SDR25: + ctrl_2 |= SDHCI_CTRL_UHS_SDR25; + break; + case MMC_TIMING_UHS_SDR50: + ctrl_2 |= SDHCI_CTRL_UHS_SDR50 | SDHCI_CTRL_VDD_180; + break; + case MMC_TIMING_UHS_SDR104: + ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180; + break; + case MMC_TIMING_UHS_DDR50: + ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180; + break; + } + + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); + dev_dbg(mmc_dev(host->mmc), + "%s uhs = %d, ctrl_2 = %04X\n", + __func__, uhs, ctrl_2); +} + +static const struct sdhci_ops pxav3_sdhci_ops = { + .set_clock = sdhci_set_clock, + .set_uhs_signaling = pxav3_set_uhs_signaling, + .platform_send_init_74_clocks = pxav3_gen_init_74_clocks, + .get_max_clock = sdhci_pltfm_clk_get_max_clock, + .set_bus_width = sdhci_set_bus_width, + .reset = pxav3_reset, + .set_uhs_signaling = sdhci_set_uhs_signaling, +}; + +static struct sdhci_pltfm_data sdhci_pxav3_pdata = { + .quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK + | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC + | SDHCI_QUIRK_32BIT_ADMA_SIZE + | SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, + .ops = &pxav3_sdhci_ops, +}; + +#ifdef CONFIG_OF +static const struct of_device_id sdhci_pxav3_of_match[] = { + { + .compatible = "mrvl,pxav3-mmc", + }, + { + .compatible = "marvell,armada-380-sdhci", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, sdhci_pxav3_of_match); + +static struct sdhci_pxa_platdata *pxav3_get_mmc_pdata(struct device *dev) +{ + struct sdhci_pxa_platdata *pdata; + struct device_node *np = dev->of_node; + u32 clk_delay_cycles; + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return NULL; + + of_property_read_u32(np, "mrvl,clk-delay-cycles", &clk_delay_cycles); + if (clk_delay_cycles > 0) + pdata->clk_delay_cycles = clk_delay_cycles; + + return pdata; +} +#else +static inline struct sdhci_pxa_platdata *pxav3_get_mmc_pdata(struct device *dev) +{ + return NULL; +} +#endif + +static int sdhci_pxav3_probe(struct platform_device *pdev) +{ + struct sdhci_pltfm_host *pltfm_host; + struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data; + struct device *dev = &pdev->dev; + struct device_node *np = pdev->dev.of_node; + struct sdhci_host *host = NULL; + struct sdhci_pxa *pxa = NULL; + const struct of_device_id *match; + + int ret; + struct clk *clk; + + pxa = kzalloc(sizeof(struct sdhci_pxa), GFP_KERNEL); + if (!pxa) + return -ENOMEM; + + host = sdhci_pltfm_init(pdev, &sdhci_pxav3_pdata, 0); + if (IS_ERR(host)) { + kfree(pxa); + return PTR_ERR(host); + } + + if (of_device_is_compatible(np, "marvell,armada-380-sdhci")) { + ret = mv_conf_mbus_windows(pdev, mv_mbus_dram_info()); + if (ret < 0) + goto err_mbus_win; + } + + + pltfm_host = sdhci_priv(host); + pltfm_host->priv = pxa; + + clk = clk_get(dev, NULL); + if (IS_ERR(clk)) { + dev_err(dev, "failed to get io clock\n"); + ret = PTR_ERR(clk); + goto err_clk_get; + } + pltfm_host->clk = clk; + clk_prepare_enable(clk); + + /* enable 1/8V DDR capable */ + host->mmc->caps |= MMC_CAP_1_8V_DDR; + + match = of_match_device(of_match_ptr(sdhci_pxav3_of_match), &pdev->dev); + if (match) { + ret = mmc_of_parse(host->mmc); + if (ret) + goto err_of_parse; + sdhci_get_of_property(pdev); + pdata = pxav3_get_mmc_pdata(dev); + } else if (pdata) { + /* on-chip device */ + if (pdata->flags & PXA_FLAG_CARD_PERMANENT) + host->mmc->caps |= MMC_CAP_NONREMOVABLE; + + /* If slot design supports 8 bit data, indicate this to MMC. */ + if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT) + host->mmc->caps |= MMC_CAP_8_BIT_DATA; + + if (pdata->quirks) + host->quirks |= pdata->quirks; + if (pdata->quirks2) + host->quirks2 |= pdata->quirks2; + if (pdata->host_caps) + host->mmc->caps |= pdata->host_caps; + if (pdata->host_caps2) + host->mmc->caps2 |= pdata->host_caps2; + if (pdata->pm_caps) + host->mmc->pm_caps |= pdata->pm_caps; + + if (gpio_is_valid(pdata->ext_cd_gpio)) { + ret = mmc_gpio_request_cd(host->mmc, pdata->ext_cd_gpio, + 0); + if (ret) { + dev_err(mmc_dev(host->mmc), + "failed to allocate card detect gpio\n"); + goto err_cd_req; + } + } + } + + pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, PXAV3_RPM_DELAY_MS); + pm_runtime_use_autosuspend(&pdev->dev); + pm_suspend_ignore_children(&pdev->dev, 1); + + ret = sdhci_add_host(host); + if (ret) { + dev_err(&pdev->dev, "failed to add host\n"); + goto err_add_host; + } + + platform_set_drvdata(pdev, host); + + if (host->mmc->pm_caps & MMC_PM_KEEP_POWER) { + device_init_wakeup(&pdev->dev, 1); + host->mmc->pm_flags |= MMC_PM_WAKE_SDIO_IRQ; + } else { + device_init_wakeup(&pdev->dev, 0); + } + + pm_runtime_put_autosuspend(&pdev->dev); + + return 0; + +err_of_parse: +err_cd_req: +err_add_host: + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + clk_disable_unprepare(clk); + clk_put(clk); +err_clk_get: +err_mbus_win: + sdhci_pltfm_free(pdev); + kfree(pxa); + return ret; +} + +static int sdhci_pxav3_remove(struct platform_device *pdev) +{ + struct sdhci_host *host = platform_get_drvdata(pdev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_pxa *pxa = pltfm_host->priv; + + pm_runtime_get_sync(&pdev->dev); + sdhci_remove_host(host, 1); + pm_runtime_disable(&pdev->dev); + + clk_disable_unprepare(pltfm_host->clk); + clk_put(pltfm_host->clk); + + sdhci_pltfm_free(pdev); + kfree(pxa); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int sdhci_pxav3_suspend(struct device *dev) +{ + int ret; + struct sdhci_host *host = dev_get_drvdata(dev); + + pm_runtime_get_sync(dev); + ret = sdhci_suspend_host(host); + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + return ret; +} + +static int sdhci_pxav3_resume(struct device *dev) +{ + int ret; + struct sdhci_host *host = dev_get_drvdata(dev); + + pm_runtime_get_sync(dev); + ret = sdhci_resume_host(host); + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + return ret; +} +#endif + +#ifdef CONFIG_PM_RUNTIME +static int sdhci_pxav3_runtime_suspend(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + unsigned long flags; + + if (pltfm_host->clk) { + spin_lock_irqsave(&host->lock, flags); + host->runtime_suspended = true; + spin_unlock_irqrestore(&host->lock, flags); + + clk_disable_unprepare(pltfm_host->clk); + } + + return 0; +} + +static int sdhci_pxav3_runtime_resume(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + unsigned long flags; + + if (pltfm_host->clk) { + clk_prepare_enable(pltfm_host->clk); + + spin_lock_irqsave(&host->lock, flags); + host->runtime_suspended = false; + spin_unlock_irqrestore(&host->lock, flags); + } + + return 0; +} +#endif + +#ifdef CONFIG_PM +static const struct dev_pm_ops sdhci_pxav3_pmops = { + SET_SYSTEM_SLEEP_PM_OPS(sdhci_pxav3_suspend, sdhci_pxav3_resume) + SET_RUNTIME_PM_OPS(sdhci_pxav3_runtime_suspend, + sdhci_pxav3_runtime_resume, NULL) +}; + +#define SDHCI_PXAV3_PMOPS (&sdhci_pxav3_pmops) + +#else +#define SDHCI_PXAV3_PMOPS NULL +#endif + +static struct platform_driver sdhci_pxav3_driver = { + .driver = { + .name = "sdhci-pxav3", +#ifdef CONFIG_OF + .of_match_table = sdhci_pxav3_of_match, +#endif + .owner = THIS_MODULE, + .pm = SDHCI_PXAV3_PMOPS, + }, + .probe = sdhci_pxav3_probe, + .remove = sdhci_pxav3_remove, +}; + +module_platform_driver(sdhci_pxav3_driver); + +MODULE_DESCRIPTION("SDHCI driver for pxav3"); +MODULE_AUTHOR("Marvell International Ltd."); +MODULE_LICENSE("GPL v2"); + diff --git a/drivers/mmc/host/sdhci-s3c-regs.h b/drivers/mmc/host/sdhci-s3c-regs.h new file mode 100644 index 00000000000..e34049ad44c --- /dev/null +++ b/drivers/mmc/host/sdhci-s3c-regs.h @@ -0,0 +1,87 @@ +/* linux/arch/arm/plat-s3c/include/plat/regs-sdhci.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C Platform - SDHCI (HSMMC) register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_S3C_SDHCI_REGS_H +#define __PLAT_S3C_SDHCI_REGS_H __FILE__ + +#define S3C_SDHCI_CONTROL2 (0x80) +#define S3C_SDHCI_CONTROL3 (0x84) +#define S3C64XX_SDHCI_CONTROL4 (0x8C) + +#define S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR (1 << 31) +#define S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK (1 << 30) +#define S3C_SDHCI_CTRL2_CDINVRXD3 (1 << 29) +#define S3C_SDHCI_CTRL2_SLCARDOUT (1 << 28) + +#define S3C_SDHCI_CTRL2_FLTCLKSEL_MASK (0xf << 24) +#define S3C_SDHCI_CTRL2_FLTCLKSEL_SHIFT (24) +#define S3C_SDHCI_CTRL2_FLTCLKSEL(_x) ((_x) << 24) + +#define S3C_SDHCI_CTRL2_LVLDAT_MASK (0xff << 16) +#define S3C_SDHCI_CTRL2_LVLDAT_SHIFT (16) +#define S3C_SDHCI_CTRL2_LVLDAT(_x) ((_x) << 16) + +#define S3C_SDHCI_CTRL2_ENFBCLKTX (1 << 15) +#define S3C_SDHCI_CTRL2_ENFBCLKRX (1 << 14) +#define S3C_SDHCI_CTRL2_SDCDSEL (1 << 13) +#define S3C_SDHCI_CTRL2_SDSIGPC (1 << 12) +#define S3C_SDHCI_CTRL2_ENBUSYCHKTXSTART (1 << 11) + +#define S3C_SDHCI_CTRL2_DFCNT_MASK (0x3 << 9) +#define S3C_SDHCI_CTRL2_DFCNT_SHIFT (9) +#define S3C_SDHCI_CTRL2_DFCNT_NONE (0x0 << 9) +#define S3C_SDHCI_CTRL2_DFCNT_4SDCLK (0x1 << 9) +#define S3C_SDHCI_CTRL2_DFCNT_16SDCLK (0x2 << 9) +#define S3C_SDHCI_CTRL2_DFCNT_64SDCLK (0x3 << 9) + +#define S3C_SDHCI_CTRL2_ENCLKOUTHOLD (1 << 8) +#define S3C_SDHCI_CTRL2_RWAITMODE (1 << 7) +#define S3C_SDHCI_CTRL2_DISBUFRD (1 << 6) +#define S3C_SDHCI_CTRL2_SELBASECLK_MASK (0x3 << 4) +#define S3C_SDHCI_CTRL2_SELBASECLK_SHIFT (4) +#define S3C_SDHCI_CTRL2_PWRSYNC (1 << 3) +#define S3C_SDHCI_CTRL2_ENCLKOUTMSKCON (1 << 1) +#define S3C_SDHCI_CTRL2_HWINITFIN (1 << 0) + +#define S3C_SDHCI_CTRL3_FCSEL3 (1 << 31) +#define S3C_SDHCI_CTRL3_FCSEL2 (1 << 23) +#define S3C_SDHCI_CTRL3_FCSEL1 (1 << 15) +#define S3C_SDHCI_CTRL3_FCSEL0 (1 << 7) + +#define S3C_SDHCI_CTRL3_FIA3_MASK (0x7f << 24) +#define S3C_SDHCI_CTRL3_FIA3_SHIFT (24) +#define S3C_SDHCI_CTRL3_FIA3(_x) ((_x) << 24) + +#define S3C_SDHCI_CTRL3_FIA2_MASK (0x7f << 16) +#define S3C_SDHCI_CTRL3_FIA2_SHIFT (16) +#define S3C_SDHCI_CTRL3_FIA2(_x) ((_x) << 16) + +#define S3C_SDHCI_CTRL3_FIA1_MASK (0x7f << 8) +#define S3C_SDHCI_CTRL3_FIA1_SHIFT (8) +#define S3C_SDHCI_CTRL3_FIA1(_x) ((_x) << 8) + +#define S3C_SDHCI_CTRL3_FIA0_MASK (0x7f << 0) +#define S3C_SDHCI_CTRL3_FIA0_SHIFT (0) +#define S3C_SDHCI_CTRL3_FIA0(_x) ((_x) << 0) + +#define S3C64XX_SDHCI_CONTROL4_DRIVE_MASK (0x3 << 16) +#define S3C64XX_SDHCI_CONTROL4_DRIVE_SHIFT (16) +#define S3C64XX_SDHCI_CONTROL4_DRIVE_2mA (0x0 << 16) +#define S3C64XX_SDHCI_CONTROL4_DRIVE_4mA (0x1 << 16) +#define S3C64XX_SDHCI_CONTROL4_DRIVE_7mA (0x2 << 16) +#define S3C64XX_SDHCI_CONTROL4_DRIVE_9mA (0x3 << 16) + +#define S3C64XX_SDHCI_CONTROL4_BUSY (1) + +#endif /* __PLAT_S3C_SDHCI_REGS_H */ diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c index aacb862ecc8..fa5954a0544 100644 --- a/drivers/mmc/host/sdhci-s3c.c +++ b/drivers/mmc/host/sdhci-s3c.c @@ -15,16 +15,20 @@ #include <linux/delay.h> #include <linux/dma-mapping.h> #include <linux/platform_device.h> +#include <linux/platform_data/mmc-sdhci-s3c.h> #include <linux/slab.h> #include <linux/clk.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> #include <linux/mmc/host.h> -#include <plat/sdhci.h> -#include <plat/regs-sdhci.h> - +#include "sdhci-s3c-regs.h" #include "sdhci.h" #define MAX_BUS_CLK (4) @@ -44,43 +48,33 @@ struct sdhci_s3c { struct platform_device *pdev; struct resource *ioarea; struct s3c_sdhci_platdata *pdata; - unsigned int cur_clk; + int cur_clk; int ext_cd_irq; int ext_cd_gpio; struct clk *clk_io; struct clk *clk_bus[MAX_BUS_CLK]; -}; + unsigned long clk_rates[MAX_BUS_CLK]; -static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host) -{ - return sdhci_priv(host); -} + bool no_divider; +}; /** - * get_curclk - convert ctrl2 register to clock source number - * @ctrl2: Control2 register value. + * struct sdhci_s3c_driver_data - S3C SDHCI platform specific driver data + * @sdhci_quirks: sdhci host specific quirks. + * + * Specifies platform specific configuration of sdhci controller. + * Note: A structure for driver specific platform data is used for future + * expansion of its usage. */ -static u32 get_curclk(u32 ctrl2) -{ - ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; - ctrl2 >>= S3C_SDHCI_CTRL2_SELBASECLK_SHIFT; - - return ctrl2; -} +struct sdhci_s3c_drv_data { + unsigned int sdhci_quirks; + bool no_divider; +}; -static void sdhci_s3c_check_sclk(struct sdhci_host *host) +static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host) { - struct sdhci_s3c *ourhost = to_s3c(host); - u32 tmp = readl(host->ioaddr + S3C_SDHCI_CONTROL2); - - if (get_curclk(tmp) != ourhost->cur_clk) { - dev_dbg(&ourhost->pdev->dev, "restored ctrl2 clock setting\n"); - - tmp &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK; - tmp |= ourhost->cur_clk << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT; - writel(tmp, host->ioaddr + 0x80); - } + return sdhci_priv(host); } /** @@ -92,20 +86,11 @@ static void sdhci_s3c_check_sclk(struct sdhci_host *host) static unsigned int sdhci_s3c_get_max_clk(struct sdhci_host *host) { struct sdhci_s3c *ourhost = to_s3c(host); - struct clk *busclk; - unsigned int rate, max; - int clk; - - /* note, a reset will reset the clock source */ - - sdhci_s3c_check_sclk(host); - - for (max = 0, clk = 0; clk < MAX_BUS_CLK; clk++) { - busclk = ourhost->clk_bus[clk]; - if (!busclk) - continue; + unsigned long rate, max = 0; + int src; - rate = clk_get_rate(busclk); + for (src = 0; src < MAX_BUS_CLK; src++) { + rate = ourhost->clk_rates[src]; if (rate > max) max = rate; } @@ -125,22 +110,38 @@ static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost, { unsigned long rate; struct clk *clksrc = ourhost->clk_bus[src]; - int div; + int shift; - if (!clksrc) + if (IS_ERR(clksrc)) return UINT_MAX; - rate = clk_get_rate(clksrc); + /* + * If controller uses a non-standard clock division, find the best clock + * speed possible with selected clock source and skip the division. + */ + if (ourhost->no_divider) { + rate = clk_round_rate(clksrc, wanted); + return wanted - rate; + } + + rate = ourhost->clk_rates[src]; - for (div = 1; div < 256; div *= 2) { - if ((rate / div) <= wanted) + for (shift = 0; shift <= 8; ++shift) { + if ((rate >> shift) <= wanted) break; } + if (shift > 8) { + dev_dbg(&ourhost->pdev->dev, + "clk %d: rate %ld, min rate %lu > wanted %u\n", + src, rate, rate / 256, wanted); + return UINT_MAX; + } + dev_dbg(&ourhost->pdev->dev, "clk %d: rate %ld, want %d, got %ld\n", - src, rate, wanted, rate / div); + src, rate, wanted, rate >> shift); - return (wanted - (rate / div)); + return wanted - (rate >> shift); } /** @@ -160,9 +161,13 @@ static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock) int src; u32 ctrl; + host->mmc->actual_clock = 0; + /* don't bother if the clock is going off. */ - if (clock == 0) + if (clock == 0) { + sdhci_set_clock(host, clock); return; + } for (src = 0; src < MAX_BUS_CLK; src++) { delta = sdhci_s3c_consider_clock(ourhost, src, clock); @@ -177,33 +182,45 @@ static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock) best_src, clock, best); /* select the new clock source */ - if (ourhost->cur_clk != best_src) { struct clk *clk = ourhost->clk_bus[best_src]; - /* turn clock off to card before changing clock source */ - writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL); + clk_prepare_enable(clk); + if (ourhost->cur_clk >= 0) + clk_disable_unprepare( + ourhost->clk_bus[ourhost->cur_clk]); ourhost->cur_clk = best_src; - host->max_clk = clk_get_rate(clk); - - ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2); - ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK; - ctrl |= best_src << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT; - writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2); + host->max_clk = ourhost->clk_rates[best_src]; } - /* reconfigure the hardware for new clock rate */ - - { - struct mmc_ios ios; - - ios.clock = clock; - - if (ourhost->pdata->cfg_card) - (ourhost->pdata->cfg_card)(ourhost->pdev, host->ioaddr, - &ios, NULL); - } + /* turn clock off to card before changing clock source */ + writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL); + + ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2); + ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK; + ctrl |= best_src << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT; + writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2); + + /* reprogram default hardware configuration */ + writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, + host->ioaddr + S3C64XX_SDHCI_CONTROL4); + + ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2); + ctrl |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | + S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | + S3C_SDHCI_CTRL2_ENFBCLKRX | + S3C_SDHCI_CTRL2_DFCNT_NONE | + S3C_SDHCI_CTRL2_ENCLKOUTHOLD); + writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2); + + /* reconfigure the controller for new clock rate */ + ctrl = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); + if (clock < 25 * 1000000) + ctrl |= (S3C_SDHCI_CTRL3_FCSEL3 | S3C_SDHCI_CTRL3_FCSEL2); + writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL3); + + sdhci_set_clock(host, clock); } /** @@ -218,93 +235,210 @@ static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock) static unsigned int sdhci_s3c_get_min_clock(struct sdhci_host *host) { struct sdhci_s3c *ourhost = to_s3c(host); - unsigned int delta, min = UINT_MAX; + unsigned long rate, min = ULONG_MAX; + int src; + + for (src = 0; src < MAX_BUS_CLK; src++) { + rate = ourhost->clk_rates[src] / 256; + if (!rate) + continue; + if (rate < min) + min = rate; + } + + return min; +} + +/* sdhci_cmu_get_max_clk - callback to get maximum clock frequency.*/ +static unsigned int sdhci_cmu_get_max_clock(struct sdhci_host *host) +{ + struct sdhci_s3c *ourhost = to_s3c(host); + unsigned long rate, max = 0; + int src; + + for (src = 0; src < MAX_BUS_CLK; src++) { + struct clk *clk; + + clk = ourhost->clk_bus[src]; + if (IS_ERR(clk)) + continue; + + rate = clk_round_rate(clk, ULONG_MAX); + if (rate > max) + max = rate; + } + + return max; +} + +/* sdhci_cmu_get_min_clock - callback to get minimal supported clock value. */ +static unsigned int sdhci_cmu_get_min_clock(struct sdhci_host *host) +{ + struct sdhci_s3c *ourhost = to_s3c(host); + unsigned long rate, min = ULONG_MAX; int src; for (src = 0; src < MAX_BUS_CLK; src++) { - delta = sdhci_s3c_consider_clock(ourhost, src, 0); - if (delta == UINT_MAX) + struct clk *clk; + + clk = ourhost->clk_bus[src]; + if (IS_ERR(clk)) continue; - /* delta is a negative value in this case */ - if (-delta < min) - min = -delta; + + rate = clk_round_rate(clk, 0); + if (rate < min) + min = rate; } + return min; } +/* sdhci_cmu_set_clock - callback on clock change.*/ +static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock) +{ + struct sdhci_s3c *ourhost = to_s3c(host); + struct device *dev = &ourhost->pdev->dev; + unsigned long timeout; + u16 clk = 0; + + host->mmc->actual_clock = 0; + + /* If the clock is going off, set to 0 at clock control register */ + if (clock == 0) { + sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); + return; + } + + sdhci_s3c_set_clock(host, clock); + + clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock); + + clk = SDHCI_CLOCK_INT_EN; + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); + + /* Wait max 20 ms */ + timeout = 20; + while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL)) + & SDHCI_CLOCK_INT_STABLE)) { + if (timeout == 0) { + dev_err(dev, "%s: Internal clock never stabilised.\n", + mmc_hostname(host->mmc)); + return; + } + timeout--; + mdelay(1); + } + + clk |= SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); +} + +/** + * sdhci_s3c_set_bus_width - support 8bit buswidth + * @host: The SDHCI host being queried + * @width: MMC_BUS_WIDTH_ macro for the bus width being requested + * + * We have 8-bit width support but is not a v3 controller. + * So we add platform_bus_width() and support 8bit width. + */ +static void sdhci_s3c_set_bus_width(struct sdhci_host *host, int width) +{ + u8 ctrl; + + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); + + switch (width) { + case MMC_BUS_WIDTH_8: + ctrl |= SDHCI_CTRL_8BITBUS; + ctrl &= ~SDHCI_CTRL_4BITBUS; + break; + case MMC_BUS_WIDTH_4: + ctrl |= SDHCI_CTRL_4BITBUS; + ctrl &= ~SDHCI_CTRL_8BITBUS; + break; + default: + ctrl &= ~SDHCI_CTRL_4BITBUS; + ctrl &= ~SDHCI_CTRL_8BITBUS; + break; + } + + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); +} + static struct sdhci_ops sdhci_s3c_ops = { .get_max_clock = sdhci_s3c_get_max_clk, .set_clock = sdhci_s3c_set_clock, .get_min_clock = sdhci_s3c_get_min_clock, + .set_bus_width = sdhci_s3c_set_bus_width, + .reset = sdhci_reset, + .set_uhs_signaling = sdhci_set_uhs_signaling, }; -static void sdhci_s3c_notify_change(struct platform_device *dev, int state) +#ifdef CONFIG_OF +static int sdhci_s3c_parse_dt(struct device *dev, + struct sdhci_host *host, struct s3c_sdhci_platdata *pdata) { - struct sdhci_host *host = platform_get_drvdata(dev); - unsigned long flags; - - if (host) { - spin_lock_irqsave(&host->lock, flags); - if (state) { - dev_dbg(&dev->dev, "card inserted.\n"); - host->flags &= ~SDHCI_DEVICE_DEAD; - host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION; - } else { - dev_dbg(&dev->dev, "card removed.\n"); - host->flags |= SDHCI_DEVICE_DEAD; - host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION; - } - tasklet_schedule(&host->card_tasklet); - spin_unlock_irqrestore(&host->lock, flags); + struct device_node *node = dev->of_node; + u32 max_width; + + /* if the bus-width property is not specified, assume width as 1 */ + if (of_property_read_u32(node, "bus-width", &max_width)) + max_width = 1; + pdata->max_width = max_width; + + /* get the card detection method */ + if (of_get_property(node, "broken-cd", NULL)) { + pdata->cd_type = S3C_SDHCI_CD_NONE; + return 0; + } + + if (of_get_property(node, "non-removable", NULL)) { + pdata->cd_type = S3C_SDHCI_CD_PERMANENT; + return 0; } -} -static irqreturn_t sdhci_s3c_gpio_card_detect_thread(int irq, void *dev_id) + if (of_get_named_gpio(node, "cd-gpios", 0)) + return 0; + + /* assuming internal card detect that will be configured by pinctrl */ + pdata->cd_type = S3C_SDHCI_CD_INTERNAL; + return 0; +} +#else +static int sdhci_s3c_parse_dt(struct device *dev, + struct sdhci_host *host, struct s3c_sdhci_platdata *pdata) { - struct sdhci_s3c *sc = dev_id; - int status = gpio_get_value(sc->ext_cd_gpio); - if (sc->pdata->ext_cd_gpio_invert) - status = !status; - sdhci_s3c_notify_change(sc->pdev, status); - return IRQ_HANDLED; + return -EINVAL; } +#endif + +static const struct of_device_id sdhci_s3c_dt_match[]; -static void sdhci_s3c_setup_card_detect_gpio(struct sdhci_s3c *sc) +static inline struct sdhci_s3c_drv_data *sdhci_s3c_get_driver_data( + struct platform_device *pdev) { - struct s3c_sdhci_platdata *pdata = sc->pdata; - struct device *dev = &sc->pdev->dev; - - if (gpio_request(pdata->ext_cd_gpio, "SDHCI EXT CD") == 0) { - sc->ext_cd_gpio = pdata->ext_cd_gpio; - sc->ext_cd_irq = gpio_to_irq(pdata->ext_cd_gpio); - if (sc->ext_cd_irq && - request_threaded_irq(sc->ext_cd_irq, NULL, - sdhci_s3c_gpio_card_detect_thread, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - dev_name(dev), sc) == 0) { - int status = gpio_get_value(sc->ext_cd_gpio); - if (pdata->ext_cd_gpio_invert) - status = !status; - sdhci_s3c_notify_change(sc->pdev, status); - } else { - dev_warn(dev, "cannot request irq for card detect\n"); - sc->ext_cd_irq = 0; - } - } else { - dev_err(dev, "cannot request gpio for card detect\n"); +#ifdef CONFIG_OF + if (pdev->dev.of_node) { + const struct of_device_id *match; + match = of_match_node(sdhci_s3c_dt_match, pdev->dev.of_node); + return (struct sdhci_s3c_drv_data *)match->data; } +#endif + return (struct sdhci_s3c_drv_data *) + platform_get_device_id(pdev)->driver_data; } -static int __devinit sdhci_s3c_probe(struct platform_device *pdev) +static int sdhci_s3c_probe(struct platform_device *pdev) { - struct s3c_sdhci_platdata *pdata = pdev->dev.platform_data; + struct s3c_sdhci_platdata *pdata; + struct sdhci_s3c_drv_data *drv_data; struct device *dev = &pdev->dev; struct sdhci_host *host; struct sdhci_s3c *sc; struct resource *res; int ret, irq, ptr, clks; - if (!pdata) { + if (!pdev->dev.platform_data && !pdev->dev.of_node) { dev_err(dev, "no device data specified\n"); return -ENOENT; } @@ -315,56 +449,60 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) return irq; } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "no memory specified\n"); - return -ENOENT; - } - host = sdhci_alloc_host(dev, sizeof(struct sdhci_s3c)); if (IS_ERR(host)) { dev_err(dev, "sdhci_alloc_host() failed\n"); return PTR_ERR(host); } - sc = sdhci_priv(host); + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + ret = -ENOMEM; + goto err_pdata_io_clk; + } + + if (pdev->dev.of_node) { + ret = sdhci_s3c_parse_dt(&pdev->dev, host, pdata); + if (ret) + goto err_pdata_io_clk; + } else { + memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata)); + sc->ext_cd_gpio = -1; /* invalid gpio number */ + } + + drv_data = sdhci_s3c_get_driver_data(pdev); + sc->host = host; sc->pdev = pdev; sc->pdata = pdata; - sc->ext_cd_gpio = -1; /* invalid gpio number */ + sc->cur_clk = -1; platform_set_drvdata(pdev, host); - sc->clk_io = clk_get(dev, "hsmmc"); + sc->clk_io = devm_clk_get(dev, "hsmmc"); if (IS_ERR(sc->clk_io)) { dev_err(dev, "failed to get io clock\n"); ret = PTR_ERR(sc->clk_io); - goto err_io_clk; + goto err_pdata_io_clk; } /* enable the local io clock and keep it running for the moment. */ - clk_enable(sc->clk_io); + clk_prepare_enable(sc->clk_io); for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) { - struct clk *clk; - char *name = pdata->clocks[ptr]; + char name[14]; - if (name == NULL) + snprintf(name, 14, "mmc_busclk.%d", ptr); + sc->clk_bus[ptr] = devm_clk_get(dev, name); + if (IS_ERR(sc->clk_bus[ptr])) continue; - clk = clk_get(dev, name); - if (IS_ERR(clk)) { - dev_err(dev, "failed to get clock %s\n", name); - continue; - } - clks++; - sc->clk_bus[ptr] = clk; - clk_enable(clk); + sc->clk_rates[ptr] = clk_get_rate(sc->clk_bus[ptr]); dev_info(dev, "clock source %d: %s (%ld Hz)\n", - ptr, name, clk_get_rate(clk)); + ptr, name, sc->clk_rates[ptr]); } if (clks == 0) { @@ -373,18 +511,10 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) goto err_no_busclks; } - sc->ioarea = request_mem_region(res->start, resource_size(res), - mmc_hostname(host->mmc)); - if (!sc->ioarea) { - dev_err(dev, "failed to reserve register area\n"); - ret = -ENXIO; - goto err_req_regs; - } - - host->ioaddr = ioremap_nocache(res->start, resource_size(res)); - if (!host->ioaddr) { - dev_err(dev, "failed to map registers\n"); - ret = -ENXIO; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + host->ioaddr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(host->ioaddr)) { + ret = PTR_ERR(host->ioaddr); goto err_req_regs; } @@ -395,11 +525,16 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) host->hw_name = "samsung-hsmmc"; host->ops = &sdhci_s3c_ops; host->quirks = 0; + host->quirks2 = 0; host->irq = irq; /* Setup quirks for the controller */ host->quirks |= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC; host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT; + if (drv_data) { + host->quirks |= drv_data->sdhci_quirks; + sc->no_divider = drv_data->no_divider; + } #ifndef CONFIG_MMC_SDHCI_S3C_DMA @@ -414,6 +549,12 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) * SDHCI block, or a missing configuration that needs to be set. */ host->quirks |= SDHCI_QUIRK_NO_BUSY_IRQ; + /* This host supports the Auto CMD12 */ + host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12; + + /* Samsung SoCs need BROKEN_ADMA_ZEROLEN_DESC */ + host->quirks |= SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC; + if (pdata->cd_type == S3C_SDHCI_CD_NONE || pdata->cd_type == S3C_SDHCI_CD_PERMANENT) host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION; @@ -421,132 +562,199 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) if (pdata->cd_type == S3C_SDHCI_CD_PERMANENT) host->mmc->caps = MMC_CAP_NONREMOVABLE; + switch (pdata->max_width) { + case 8: + host->mmc->caps |= MMC_CAP_8_BIT_DATA; + case 4: + host->mmc->caps |= MMC_CAP_4_BIT_DATA; + break; + } + + if (pdata->pm_caps) + host->mmc->pm_caps |= pdata->pm_caps; + host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR | SDHCI_QUIRK_32BIT_DMA_SIZE); /* HSMMC on Samsung SoCs uses SDCLK as timeout clock */ host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK; + /* + * If controller does not have internal clock divider, + * we can use overriding functions instead of default. + */ + if (sc->no_divider) { + sdhci_s3c_ops.set_clock = sdhci_cmu_set_clock; + sdhci_s3c_ops.get_min_clock = sdhci_cmu_get_min_clock; + sdhci_s3c_ops.get_max_clock = sdhci_cmu_get_max_clock; + } + + /* It supports additional host capabilities if needed */ + if (pdata->host_caps) + host->mmc->caps |= pdata->host_caps; + + if (pdata->host_caps2) + host->mmc->caps2 |= pdata->host_caps2; + + pm_runtime_enable(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, 50); + pm_runtime_use_autosuspend(&pdev->dev); + pm_suspend_ignore_children(&pdev->dev, 1); + + mmc_of_parse(host->mmc); + ret = sdhci_add_host(host); if (ret) { dev_err(dev, "sdhci_add_host() failed\n"); - goto err_add_host; + pm_runtime_forbid(&pdev->dev); + pm_runtime_get_noresume(&pdev->dev); + goto err_req_regs; } - /* The following two methods of card detection might call - sdhci_s3c_notify_change() immediately, so they can be called - only after sdhci_add_host(). Setup errors are ignored. */ - if (pdata->cd_type == S3C_SDHCI_CD_EXTERNAL && pdata->ext_cd_init) - pdata->ext_cd_init(&sdhci_s3c_notify_change); - if (pdata->cd_type == S3C_SDHCI_CD_GPIO && - gpio_is_valid(pdata->ext_cd_gpio)) - sdhci_s3c_setup_card_detect_gpio(sc); - +#ifdef CONFIG_PM_RUNTIME + if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL) + clk_disable_unprepare(sc->clk_io); +#endif return 0; - err_add_host: - release_resource(sc->ioarea); - kfree(sc->ioarea); - err_req_regs: - for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) { - clk_disable(sc->clk_bus[ptr]); - clk_put(sc->clk_bus[ptr]); - } - err_no_busclks: - clk_disable(sc->clk_io); - clk_put(sc->clk_io); + clk_disable_unprepare(sc->clk_io); - err_io_clk: + err_pdata_io_clk: sdhci_free_host(host); return ret; } -static int __devexit sdhci_s3c_remove(struct platform_device *pdev) +static int sdhci_s3c_remove(struct platform_device *pdev) { - struct s3c_sdhci_platdata *pdata = pdev->dev.platform_data; struct sdhci_host *host = platform_get_drvdata(pdev); struct sdhci_s3c *sc = sdhci_priv(host); - int ptr; - - if (pdata->cd_type == S3C_SDHCI_CD_EXTERNAL && pdata->ext_cd_cleanup) - pdata->ext_cd_cleanup(&sdhci_s3c_notify_change); if (sc->ext_cd_irq) free_irq(sc->ext_cd_irq, sc); - if (gpio_is_valid(sc->ext_cd_gpio)) - gpio_free(sc->ext_cd_gpio); - +#ifdef CONFIG_PM_RUNTIME + if (sc->pdata->cd_type != S3C_SDHCI_CD_INTERNAL) + clk_prepare_enable(sc->clk_io); +#endif sdhci_remove_host(host, 1); - for (ptr = 0; ptr < 3; ptr++) { - if (sc->clk_bus[ptr]) { - clk_disable(sc->clk_bus[ptr]); - clk_put(sc->clk_bus[ptr]); - } - } - clk_disable(sc->clk_io); - clk_put(sc->clk_io); + pm_runtime_dont_use_autosuspend(&pdev->dev); + pm_runtime_disable(&pdev->dev); - iounmap(host->ioaddr); - release_resource(sc->ioarea); - kfree(sc->ioarea); + clk_disable_unprepare(sc->clk_io); sdhci_free_host(host); - platform_set_drvdata(pdev, NULL); return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP +static int sdhci_s3c_suspend(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); -static int sdhci_s3c_suspend(struct platform_device *dev, pm_message_t pm) + return sdhci_suspend_host(host); +} + +static int sdhci_s3c_resume(struct device *dev) { - struct sdhci_host *host = platform_get_drvdata(dev); + struct sdhci_host *host = dev_get_drvdata(dev); - sdhci_suspend_host(host, pm); - return 0; + return sdhci_resume_host(host); } +#endif -static int sdhci_s3c_resume(struct platform_device *dev) +#ifdef CONFIG_PM_RUNTIME +static int sdhci_s3c_runtime_suspend(struct device *dev) { - struct sdhci_host *host = platform_get_drvdata(dev); + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_s3c *ourhost = to_s3c(host); + struct clk *busclk = ourhost->clk_io; + int ret; - sdhci_resume_host(host); - return 0; + ret = sdhci_runtime_suspend_host(host); + + if (ourhost->cur_clk >= 0) + clk_disable_unprepare(ourhost->clk_bus[ourhost->cur_clk]); + clk_disable_unprepare(busclk); + return ret; } +static int sdhci_s3c_runtime_resume(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_s3c *ourhost = to_s3c(host); + struct clk *busclk = ourhost->clk_io; + int ret; + + clk_prepare_enable(busclk); + if (ourhost->cur_clk >= 0) + clk_prepare_enable(ourhost->clk_bus[ourhost->cur_clk]); + ret = sdhci_runtime_resume_host(host); + return ret; +} +#endif + +#ifdef CONFIG_PM +static const struct dev_pm_ops sdhci_s3c_pmops = { + SET_SYSTEM_SLEEP_PM_OPS(sdhci_s3c_suspend, sdhci_s3c_resume) + SET_RUNTIME_PM_OPS(sdhci_s3c_runtime_suspend, sdhci_s3c_runtime_resume, + NULL) +}; + +#define SDHCI_S3C_PMOPS (&sdhci_s3c_pmops) + +#else +#define SDHCI_S3C_PMOPS NULL +#endif + +#if defined(CONFIG_CPU_EXYNOS4210) || defined(CONFIG_SOC_EXYNOS4212) +static struct sdhci_s3c_drv_data exynos4_sdhci_drv_data = { + .no_divider = true, +}; +#define EXYNOS4_SDHCI_DRV_DATA ((kernel_ulong_t)&exynos4_sdhci_drv_data) #else -#define sdhci_s3c_suspend NULL -#define sdhci_s3c_resume NULL +#define EXYNOS4_SDHCI_DRV_DATA ((kernel_ulong_t)NULL) +#endif + +static struct platform_device_id sdhci_s3c_driver_ids[] = { + { + .name = "s3c-sdhci", + .driver_data = (kernel_ulong_t)NULL, + }, { + .name = "exynos4-sdhci", + .driver_data = EXYNOS4_SDHCI_DRV_DATA, + }, + { } +}; +MODULE_DEVICE_TABLE(platform, sdhci_s3c_driver_ids); + +#ifdef CONFIG_OF +static const struct of_device_id sdhci_s3c_dt_match[] = { + { .compatible = "samsung,s3c6410-sdhci", }, + { .compatible = "samsung,exynos4210-sdhci", + .data = (void *)EXYNOS4_SDHCI_DRV_DATA }, + {}, +}; +MODULE_DEVICE_TABLE(of, sdhci_s3c_dt_match); #endif static struct platform_driver sdhci_s3c_driver = { .probe = sdhci_s3c_probe, - .remove = __devexit_p(sdhci_s3c_remove), - .suspend = sdhci_s3c_suspend, - .resume = sdhci_s3c_resume, + .remove = sdhci_s3c_remove, + .id_table = sdhci_s3c_driver_ids, .driver = { .owner = THIS_MODULE, .name = "s3c-sdhci", + .of_match_table = of_match_ptr(sdhci_s3c_dt_match), + .pm = SDHCI_S3C_PMOPS, }, }; -static int __init sdhci_s3c_init(void) -{ - return platform_driver_register(&sdhci_s3c_driver); -} - -static void __exit sdhci_s3c_exit(void) -{ - platform_driver_unregister(&sdhci_s3c_driver); -} - -module_init(sdhci_s3c_init); -module_exit(sdhci_s3c_exit); +module_platform_driver(sdhci_s3c_driver); MODULE_DESCRIPTION("Samsung SDHCI (HSMMC) glue"); MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>"); diff --git a/drivers/mmc/host/sdhci-sirf.c b/drivers/mmc/host/sdhci-sirf.c new file mode 100644 index 00000000000..17004531d08 --- /dev/null +++ b/drivers/mmc/host/sdhci-sirf.c @@ -0,0 +1,184 @@ +/* + * SDHCI support for SiRF primaII and marco SoCs + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/mmc/host.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/mmc/slot-gpio.h> +#include "sdhci-pltfm.h" + +struct sdhci_sirf_priv { + struct clk *clk; + int gpio_cd; +}; + +static unsigned int sdhci_sirf_get_max_clk(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_sirf_priv *priv = sdhci_pltfm_priv(pltfm_host); + return clk_get_rate(priv->clk); +} + +static struct sdhci_ops sdhci_sirf_ops = { + .set_clock = sdhci_set_clock, + .get_max_clock = sdhci_sirf_get_max_clk, + .set_bus_width = sdhci_set_bus_width, + .reset = sdhci_reset, + .set_uhs_signaling = sdhci_set_uhs_signaling, +}; + +static struct sdhci_pltfm_data sdhci_sirf_pdata = { + .ops = &sdhci_sirf_ops, + .quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL | + SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | + SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN | + SDHCI_QUIRK_INVERTED_WRITE_PROTECT | + SDHCI_QUIRK_DELAY_AFTER_POWER, +}; + +static int sdhci_sirf_probe(struct platform_device *pdev) +{ + struct sdhci_host *host; + struct sdhci_pltfm_host *pltfm_host; + struct sdhci_sirf_priv *priv; + struct clk *clk; + int gpio_cd; + int ret; + + clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "unable to get clock"); + return PTR_ERR(clk); + } + + if (pdev->dev.of_node) + gpio_cd = of_get_named_gpio(pdev->dev.of_node, "cd-gpios", 0); + else + gpio_cd = -EINVAL; + + host = sdhci_pltfm_init(pdev, &sdhci_sirf_pdata, sizeof(struct sdhci_sirf_priv)); + if (IS_ERR(host)) + return PTR_ERR(host); + + pltfm_host = sdhci_priv(host); + priv = sdhci_pltfm_priv(pltfm_host); + priv->clk = clk; + priv->gpio_cd = gpio_cd; + + sdhci_get_of_property(pdev); + + ret = clk_prepare_enable(priv->clk); + if (ret) + goto err_clk_prepare; + + ret = sdhci_add_host(host); + if (ret) + goto err_sdhci_add; + + /* + * We must request the IRQ after sdhci_add_host(), as the tasklet only + * gets setup in sdhci_add_host() and we oops. + */ + if (gpio_is_valid(priv->gpio_cd)) { + ret = mmc_gpio_request_cd(host->mmc, priv->gpio_cd, 0); + if (ret) { + dev_err(&pdev->dev, "card detect irq request failed: %d\n", + ret); + goto err_request_cd; + } + } + + return 0; + +err_request_cd: + sdhci_remove_host(host, 0); +err_sdhci_add: + clk_disable_unprepare(priv->clk); +err_clk_prepare: + sdhci_pltfm_free(pdev); + return ret; +} + +static int sdhci_sirf_remove(struct platform_device *pdev) +{ + struct sdhci_host *host = platform_get_drvdata(pdev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_sirf_priv *priv = sdhci_pltfm_priv(pltfm_host); + + sdhci_pltfm_unregister(pdev); + + if (gpio_is_valid(priv->gpio_cd)) + mmc_gpio_free_cd(host->mmc); + + clk_disable_unprepare(priv->clk); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int sdhci_sirf_suspend(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_sirf_priv *priv = sdhci_pltfm_priv(pltfm_host); + int ret; + + ret = sdhci_suspend_host(host); + if (ret) + return ret; + + clk_disable(priv->clk); + + return 0; +} + +static int sdhci_sirf_resume(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_sirf_priv *priv = sdhci_pltfm_priv(pltfm_host); + int ret; + + ret = clk_enable(priv->clk); + if (ret) { + dev_dbg(dev, "Resume: Error enabling clock\n"); + return ret; + } + + return sdhci_resume_host(host); +} + +static SIMPLE_DEV_PM_OPS(sdhci_sirf_pm_ops, sdhci_sirf_suspend, sdhci_sirf_resume); +#endif + +static const struct of_device_id sdhci_sirf_of_match[] = { + { .compatible = "sirf,prima2-sdhc" }, + { } +}; +MODULE_DEVICE_TABLE(of, sdhci_sirf_of_match); + +static struct platform_driver sdhci_sirf_driver = { + .driver = { + .name = "sdhci-sirf", + .owner = THIS_MODULE, + .of_match_table = sdhci_sirf_of_match, +#ifdef CONFIG_PM_SLEEP + .pm = &sdhci_sirf_pm_ops, +#endif + }, + .probe = sdhci_sirf_probe, + .remove = sdhci_sirf_remove, +}; + +module_platform_driver(sdhci_sirf_driver); + +MODULE_DESCRIPTION("SDHCI driver for SiRFprimaII/SiRFmarco"); +MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c index d70c54c7b70..9d535c7336e 100644 --- a/drivers/mmc/host/sdhci-spear.c +++ b/drivers/mmc/host/sdhci-spear.c @@ -4,7 +4,7 @@ * Support of SDHCI platform devices for spear soc family * * Copyright (C) 2010 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * Inspired by sdhci-pltfm.c * @@ -17,12 +17,17 @@ #include <linux/delay.h> #include <linux/gpio.h> #include <linux/highmem.h> +#include <linux/module.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/of.h> +#include <linux/of_gpio.h> #include <linux/platform_device.h> +#include <linux/pm.h> #include <linux/slab.h> #include <linux/mmc/host.h> #include <linux/mmc/sdhci-spear.h> +#include <linux/mmc/slot-gpio.h> #include <linux/io.h> #include "sdhci.h" @@ -32,267 +37,209 @@ struct spear_sdhci { }; /* sdhci ops */ -static struct sdhci_ops sdhci_pltfm_ops = { - /* Nothing to do for now. */ +static const struct sdhci_ops sdhci_pltfm_ops = { + .set_clock = sdhci_set_clock, + .set_bus_width = sdhci_set_bus_width, + .reset = sdhci_reset, + .set_uhs_signaling = sdhci_set_uhs_signaling, }; -/* gpio card detection interrupt handler */ -static irqreturn_t sdhci_gpio_irq(int irq, void *dev_id) +#ifdef CONFIG_OF +static struct sdhci_plat_data *sdhci_probe_config_dt(struct platform_device *pdev) { - struct platform_device *pdev = dev_id; - struct sdhci_host *host = platform_get_drvdata(pdev); - struct spear_sdhci *sdhci = dev_get_platdata(&pdev->dev); - unsigned long gpio_irq_type; - int val; - - val = gpio_get_value(sdhci->data->card_int_gpio); - - /* val == 1 -> card removed, val == 0 -> card inserted */ - /* if card removed - set irq for low level, else vice versa */ - gpio_irq_type = val ? IRQF_TRIGGER_LOW : IRQF_TRIGGER_HIGH; - set_irq_type(irq, gpio_irq_type); - - if (sdhci->data->card_power_gpio >= 0) { - if (!sdhci->data->power_always_enb) { - /* if card inserted, give power, otherwise remove it */ - val = sdhci->data->power_active_high ? !val : val ; - gpio_set_value(sdhci->data->card_power_gpio, val); - } + struct device_node *np = pdev->dev.of_node; + struct sdhci_plat_data *pdata = NULL; + int cd_gpio; + + cd_gpio = of_get_named_gpio(np, "cd-gpios", 0); + if (!gpio_is_valid(cd_gpio)) + cd_gpio = -1; + + /* If pdata is required */ + if (cd_gpio != -1) { + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + dev_err(&pdev->dev, "DT: kzalloc failed\n"); + else + pdata->card_int_gpio = cd_gpio; } - /* inform sdhci driver about card insertion/removal */ - tasklet_schedule(&host->card_tasklet); - - return IRQ_HANDLED; + return pdata; +} +#else +static struct sdhci_plat_data *sdhci_probe_config_dt(struct platform_device *pdev) +{ + return ERR_PTR(-ENOSYS); } +#endif -static int __devinit sdhci_probe(struct platform_device *pdev) +static int sdhci_probe(struct platform_device *pdev) { + struct device_node *np = pdev->dev.of_node; struct sdhci_host *host; struct resource *iomem; struct spear_sdhci *sdhci; + struct device *dev; int ret; - BUG_ON(pdev == NULL); - - iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!iomem) { - ret = -ENOMEM; - dev_dbg(&pdev->dev, "memory resource not defined\n"); + dev = pdev->dev.parent ? pdev->dev.parent : &pdev->dev; + host = sdhci_alloc_host(dev, sizeof(*sdhci)); + if (IS_ERR(host)) { + ret = PTR_ERR(host); + dev_dbg(&pdev->dev, "cannot allocate memory for sdhci\n"); goto err; } - if (!request_mem_region(iomem->start, resource_size(iomem), - "spear-sdhci")) { - ret = -EBUSY; - dev_dbg(&pdev->dev, "cannot request region\n"); - goto err; + iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + host->ioaddr = devm_ioremap_resource(&pdev->dev, iomem); + if (IS_ERR(host->ioaddr)) { + ret = PTR_ERR(host->ioaddr); + dev_dbg(&pdev->dev, "unable to map iomem: %d\n", ret); + goto err_host; } - sdhci = kzalloc(sizeof(*sdhci), GFP_KERNEL); - if (!sdhci) { - ret = -ENOMEM; - dev_dbg(&pdev->dev, "cannot allocate memory for sdhci\n"); - goto err_kzalloc; - } + host->hw_name = "sdhci"; + host->ops = &sdhci_pltfm_ops; + host->irq = platform_get_irq(pdev, 0); + host->quirks = SDHCI_QUIRK_BROKEN_ADMA; + + sdhci = sdhci_priv(host); /* clk enable */ - sdhci->clk = clk_get(&pdev->dev, NULL); + sdhci->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(sdhci->clk)) { ret = PTR_ERR(sdhci->clk); dev_dbg(&pdev->dev, "Error getting clock\n"); - goto err_clk_get; + goto err_host; } - ret = clk_enable(sdhci->clk); + ret = clk_prepare_enable(sdhci->clk); if (ret) { dev_dbg(&pdev->dev, "Error enabling clock\n"); - goto err_clk_enb; + goto err_host; } - /* overwrite platform_data */ - sdhci->data = dev_get_platdata(&pdev->dev); - pdev->dev.platform_data = sdhci; + ret = clk_set_rate(sdhci->clk, 50000000); + if (ret) + dev_dbg(&pdev->dev, "Error setting desired clk, clk=%lu\n", + clk_get_rate(sdhci->clk)); - if (pdev->dev.parent) - host = sdhci_alloc_host(pdev->dev.parent, 0); - else - host = sdhci_alloc_host(&pdev->dev, 0); - - if (IS_ERR(host)) { - ret = PTR_ERR(host); - dev_dbg(&pdev->dev, "error allocating host\n"); - goto err_alloc_host; + if (np) { + sdhci->data = sdhci_probe_config_dt(pdev); + if (IS_ERR(sdhci->data)) { + dev_err(&pdev->dev, "DT: Failed to get pdata\n"); + goto disable_clk; + } + } else { + sdhci->data = dev_get_platdata(&pdev->dev); } - host->hw_name = "sdhci"; - host->ops = &sdhci_pltfm_ops; - host->irq = platform_get_irq(pdev, 0); - host->quirks = SDHCI_QUIRK_BROKEN_ADMA; - - host->ioaddr = ioremap(iomem->start, resource_size(iomem)); - if (!host->ioaddr) { - ret = -ENOMEM; - dev_dbg(&pdev->dev, "failed to remap registers\n"); - goto err_ioremap; + /* + * It is optional to use GPIOs for sdhci card detection. If + * sdhci->data is NULL, then use original sdhci lines otherwise + * GPIO lines. We use the built-in GPIO support for this. + */ + if (sdhci->data && sdhci->data->card_int_gpio >= 0) { + ret = mmc_gpio_request_cd(host->mmc, + sdhci->data->card_int_gpio, 0); + if (ret < 0) { + dev_dbg(&pdev->dev, + "failed to request card-detect gpio%d\n", + sdhci->data->card_int_gpio); + goto disable_clk; + } } ret = sdhci_add_host(host); if (ret) { dev_dbg(&pdev->dev, "error adding host\n"); - goto err_add_host; + goto disable_clk; } platform_set_drvdata(pdev, host); - /* - * It is optional to use GPIOs for sdhci Power control & sdhci card - * interrupt detection. If sdhci->data is NULL, then use original sdhci - * lines otherwise GPIO lines. - * If GPIO is selected for power control, then power should be disabled - * after card removal and should be enabled when card insertion - * interrupt occurs - */ - if (!sdhci->data) - return 0; - - if (sdhci->data->card_power_gpio >= 0) { - int val = 0; - - ret = gpio_request(sdhci->data->card_power_gpio, "sdhci"); - if (ret < 0) { - dev_dbg(&pdev->dev, "gpio request fail: %d\n", - sdhci->data->card_power_gpio); - goto err_pgpio_request; - } - - if (sdhci->data->power_always_enb) - val = sdhci->data->power_active_high; - else - val = !sdhci->data->power_active_high; - - ret = gpio_direction_output(sdhci->data->card_power_gpio, val); - if (ret) { - dev_dbg(&pdev->dev, "gpio set direction fail: %d\n", - sdhci->data->card_power_gpio); - goto err_pgpio_direction; - } - - gpio_set_value(sdhci->data->card_power_gpio, 1); - } - - if (sdhci->data->card_int_gpio >= 0) { - ret = gpio_request(sdhci->data->card_int_gpio, "sdhci"); - if (ret < 0) { - dev_dbg(&pdev->dev, "gpio request fail: %d\n", - sdhci->data->card_int_gpio); - goto err_igpio_request; - } - - ret = gpio_direction_input(sdhci->data->card_int_gpio); - if (ret) { - dev_dbg(&pdev->dev, "gpio set direction fail: %d\n", - sdhci->data->card_int_gpio); - goto err_igpio_direction; - } - ret = request_irq(gpio_to_irq(sdhci->data->card_int_gpio), - sdhci_gpio_irq, IRQF_TRIGGER_LOW, - mmc_hostname(host->mmc), pdev); - if (ret) { - dev_dbg(&pdev->dev, "gpio request irq fail: %d\n", - sdhci->data->card_int_gpio); - goto err_igpio_request_irq; - } - - } - return 0; -err_igpio_request_irq: -err_igpio_direction: - if (sdhci->data->card_int_gpio >= 0) - gpio_free(sdhci->data->card_int_gpio); -err_igpio_request: -err_pgpio_direction: - if (sdhci->data->card_power_gpio >= 0) - gpio_free(sdhci->data->card_power_gpio); -err_pgpio_request: - platform_set_drvdata(pdev, NULL); - sdhci_remove_host(host, 1); -err_add_host: - iounmap(host->ioaddr); -err_ioremap: +disable_clk: + clk_disable_unprepare(sdhci->clk); +err_host: sdhci_free_host(host); -err_alloc_host: - clk_disable(sdhci->clk); -err_clk_enb: - clk_put(sdhci->clk); -err_clk_get: - kfree(sdhci); -err_kzalloc: - release_mem_region(iomem->start, resource_size(iomem)); err: dev_err(&pdev->dev, "spear-sdhci probe failed: %d\n", ret); return ret; } -static int __devexit sdhci_remove(struct platform_device *pdev) +static int sdhci_remove(struct platform_device *pdev) { struct sdhci_host *host = platform_get_drvdata(pdev); - struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - struct spear_sdhci *sdhci = dev_get_platdata(&pdev->dev); - int dead; + struct spear_sdhci *sdhci = sdhci_priv(host); + int dead = 0; u32 scratch; - if (sdhci->data) { - if (sdhci->data->card_int_gpio >= 0) { - free_irq(gpio_to_irq(sdhci->data->card_int_gpio), pdev); - gpio_free(sdhci->data->card_int_gpio); - } - - if (sdhci->data->card_power_gpio >= 0) - gpio_free(sdhci->data->card_power_gpio); - } - - platform_set_drvdata(pdev, NULL); - dead = 0; scratch = readl(host->ioaddr + SDHCI_INT_STATUS); if (scratch == (u32)-1) dead = 1; sdhci_remove_host(host, dead); - iounmap(host->ioaddr); + clk_disable_unprepare(sdhci->clk); sdhci_free_host(host); - clk_disable(sdhci->clk); - clk_put(sdhci->clk); - kfree(sdhci); - if (iomem) - release_mem_region(iomem->start, resource_size(iomem)); return 0; } +#ifdef CONFIG_PM_SLEEP +static int sdhci_suspend(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct spear_sdhci *sdhci = sdhci_priv(host); + int ret; + + ret = sdhci_suspend_host(host); + if (!ret) + clk_disable(sdhci->clk); + + return ret; +} + +static int sdhci_resume(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct spear_sdhci *sdhci = sdhci_priv(host); + int ret; + + ret = clk_enable(sdhci->clk); + if (ret) { + dev_dbg(dev, "Resume: Error enabling clock\n"); + return ret; + } + + return sdhci_resume_host(host); +} +#endif + +static SIMPLE_DEV_PM_OPS(sdhci_pm_ops, sdhci_suspend, sdhci_resume); + +#ifdef CONFIG_OF +static const struct of_device_id sdhci_spear_id_table[] = { + { .compatible = "st,spear300-sdhci" }, + {} +}; +MODULE_DEVICE_TABLE(of, sdhci_spear_id_table); +#endif + static struct platform_driver sdhci_driver = { .driver = { .name = "sdhci", .owner = THIS_MODULE, + .pm = &sdhci_pm_ops, + .of_match_table = of_match_ptr(sdhci_spear_id_table), }, .probe = sdhci_probe, - .remove = __devexit_p(sdhci_remove), + .remove = sdhci_remove, }; -static int __init sdhci_init(void) -{ - return platform_driver_register(&sdhci_driver); -} -module_init(sdhci_init); - -static void __exit sdhci_exit(void) -{ - platform_driver_unregister(&sdhci_driver); -} -module_exit(sdhci_exit); +module_platform_driver(sdhci_driver); MODULE_DESCRIPTION("SPEAr Secure Digital Host Controller Interface driver"); -MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>"); +MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c new file mode 100644 index 00000000000..d93a063a36f --- /dev/null +++ b/drivers/mmc/host/sdhci-tegra.c @@ -0,0 +1,335 @@ +/* + * Copyright (C) 2010 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/err.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> +#include <linux/gpio.h> +#include <linux/mmc/card.h> +#include <linux/mmc/host.h> +#include <linux/mmc/slot-gpio.h> + +#include <asm/gpio.h> + +#include "sdhci-pltfm.h" + +/* Tegra SDHOST controller vendor register definitions */ +#define SDHCI_TEGRA_VENDOR_MISC_CTRL 0x120 +#define SDHCI_MISC_CTRL_ENABLE_SDR104 0x8 +#define SDHCI_MISC_CTRL_ENABLE_SDR50 0x10 +#define SDHCI_MISC_CTRL_ENABLE_SDHCI_SPEC_300 0x20 +#define SDHCI_MISC_CTRL_ENABLE_DDR50 0x200 + +#define NVQUIRK_FORCE_SDHCI_SPEC_200 BIT(0) +#define NVQUIRK_ENABLE_BLOCK_GAP_DET BIT(1) +#define NVQUIRK_ENABLE_SDHCI_SPEC_300 BIT(2) +#define NVQUIRK_DISABLE_SDR50 BIT(3) +#define NVQUIRK_DISABLE_SDR104 BIT(4) +#define NVQUIRK_DISABLE_DDR50 BIT(5) + +struct sdhci_tegra_soc_data { + const struct sdhci_pltfm_data *pdata; + u32 nvquirks; +}; + +struct sdhci_tegra { + const struct sdhci_tegra_soc_data *soc_data; + int power_gpio; +}; + +static u16 tegra_sdhci_readw(struct sdhci_host *host, int reg) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_tegra *tegra_host = pltfm_host->priv; + const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data; + + if (unlikely((soc_data->nvquirks & NVQUIRK_FORCE_SDHCI_SPEC_200) && + (reg == SDHCI_HOST_VERSION))) { + /* Erratum: Version register is invalid in HW. */ + return SDHCI_SPEC_200; + } + + return readw(host->ioaddr + reg); +} + +static void tegra_sdhci_writel(struct sdhci_host *host, u32 val, int reg) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_tegra *tegra_host = pltfm_host->priv; + const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data; + + /* Seems like we're getting spurious timeout and crc errors, so + * disable signalling of them. In case of real errors software + * timers should take care of eventually detecting them. + */ + if (unlikely(reg == SDHCI_SIGNAL_ENABLE)) + val &= ~(SDHCI_INT_TIMEOUT|SDHCI_INT_CRC); + + writel(val, host->ioaddr + reg); + + if (unlikely((soc_data->nvquirks & NVQUIRK_ENABLE_BLOCK_GAP_DET) && + (reg == SDHCI_INT_ENABLE))) { + /* Erratum: Must enable block gap interrupt detection */ + u8 gap_ctrl = readb(host->ioaddr + SDHCI_BLOCK_GAP_CONTROL); + if (val & SDHCI_INT_CARD_INT) + gap_ctrl |= 0x8; + else + gap_ctrl &= ~0x8; + writeb(gap_ctrl, host->ioaddr + SDHCI_BLOCK_GAP_CONTROL); + } +} + +static unsigned int tegra_sdhci_get_ro(struct sdhci_host *host) +{ + return mmc_gpio_get_ro(host->mmc); +} + +static void tegra_sdhci_reset(struct sdhci_host *host, u8 mask) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_tegra *tegra_host = pltfm_host->priv; + const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data; + u32 misc_ctrl; + + sdhci_reset(host, mask); + + if (!(mask & SDHCI_RESET_ALL)) + return; + + misc_ctrl = sdhci_readw(host, SDHCI_TEGRA_VENDOR_MISC_CTRL); + /* Erratum: Enable SDHCI spec v3.00 support */ + if (soc_data->nvquirks & NVQUIRK_ENABLE_SDHCI_SPEC_300) + misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_SDHCI_SPEC_300; + /* Don't advertise UHS modes which aren't supported yet */ + if (soc_data->nvquirks & NVQUIRK_DISABLE_SDR50) + misc_ctrl &= ~SDHCI_MISC_CTRL_ENABLE_SDR50; + if (soc_data->nvquirks & NVQUIRK_DISABLE_DDR50) + misc_ctrl &= ~SDHCI_MISC_CTRL_ENABLE_DDR50; + if (soc_data->nvquirks & NVQUIRK_DISABLE_SDR104) + misc_ctrl &= ~SDHCI_MISC_CTRL_ENABLE_SDR104; + sdhci_writew(host, misc_ctrl, SDHCI_TEGRA_VENDOR_MISC_CTRL); +} + +static void tegra_sdhci_set_bus_width(struct sdhci_host *host, int bus_width) +{ + u32 ctrl; + + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); + if ((host->mmc->caps & MMC_CAP_8_BIT_DATA) && + (bus_width == MMC_BUS_WIDTH_8)) { + ctrl &= ~SDHCI_CTRL_4BITBUS; + ctrl |= SDHCI_CTRL_8BITBUS; + } else { + ctrl &= ~SDHCI_CTRL_8BITBUS; + if (bus_width == MMC_BUS_WIDTH_4) + ctrl |= SDHCI_CTRL_4BITBUS; + else + ctrl &= ~SDHCI_CTRL_4BITBUS; + } + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); +} + +static const struct sdhci_ops tegra_sdhci_ops = { + .get_ro = tegra_sdhci_get_ro, + .read_w = tegra_sdhci_readw, + .write_l = tegra_sdhci_writel, + .set_clock = sdhci_set_clock, + .set_bus_width = tegra_sdhci_set_bus_width, + .reset = tegra_sdhci_reset, + .set_uhs_signaling = sdhci_set_uhs_signaling, + .get_max_clock = sdhci_pltfm_clk_get_max_clock, +}; + +static const struct sdhci_pltfm_data sdhci_tegra20_pdata = { + .quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL | + SDHCI_QUIRK_SINGLE_POWER_WRITE | + SDHCI_QUIRK_NO_HISPD_BIT | + SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC | + SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, + .ops = &tegra_sdhci_ops, +}; + +static struct sdhci_tegra_soc_data soc_data_tegra20 = { + .pdata = &sdhci_tegra20_pdata, + .nvquirks = NVQUIRK_FORCE_SDHCI_SPEC_200 | + NVQUIRK_ENABLE_BLOCK_GAP_DET, +}; + +static const struct sdhci_pltfm_data sdhci_tegra30_pdata = { + .quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL | + SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | + SDHCI_QUIRK_SINGLE_POWER_WRITE | + SDHCI_QUIRK_NO_HISPD_BIT | + SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC | + SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, + .ops = &tegra_sdhci_ops, +}; + +static struct sdhci_tegra_soc_data soc_data_tegra30 = { + .pdata = &sdhci_tegra30_pdata, + .nvquirks = NVQUIRK_ENABLE_SDHCI_SPEC_300 | + NVQUIRK_DISABLE_SDR50 | + NVQUIRK_DISABLE_SDR104, +}; + +static const struct sdhci_pltfm_data sdhci_tegra114_pdata = { + .quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL | + SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | + SDHCI_QUIRK_SINGLE_POWER_WRITE | + SDHCI_QUIRK_NO_HISPD_BIT | + SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC | + SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, + .ops = &tegra_sdhci_ops, +}; + +static struct sdhci_tegra_soc_data soc_data_tegra114 = { + .pdata = &sdhci_tegra114_pdata, + .nvquirks = NVQUIRK_DISABLE_SDR50 | + NVQUIRK_DISABLE_DDR50 | + NVQUIRK_DISABLE_SDR104, +}; + +static const struct of_device_id sdhci_tegra_dt_match[] = { + { .compatible = "nvidia,tegra124-sdhci", .data = &soc_data_tegra114 }, + { .compatible = "nvidia,tegra114-sdhci", .data = &soc_data_tegra114 }, + { .compatible = "nvidia,tegra30-sdhci", .data = &soc_data_tegra30 }, + { .compatible = "nvidia,tegra20-sdhci", .data = &soc_data_tegra20 }, + {} +}; +MODULE_DEVICE_TABLE(of, sdhci_tegra_dt_match); + +static int sdhci_tegra_parse_dt(struct device *dev) +{ + struct device_node *np = dev->of_node; + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_tegra *tegra_host = pltfm_host->priv; + + tegra_host->power_gpio = of_get_named_gpio(np, "power-gpios", 0); + return mmc_of_parse(host->mmc); +} + +static int sdhci_tegra_probe(struct platform_device *pdev) +{ + const struct of_device_id *match; + const struct sdhci_tegra_soc_data *soc_data; + struct sdhci_host *host; + struct sdhci_pltfm_host *pltfm_host; + struct sdhci_tegra *tegra_host; + struct clk *clk; + int rc; + + match = of_match_device(sdhci_tegra_dt_match, &pdev->dev); + if (!match) + return -EINVAL; + soc_data = match->data; + + host = sdhci_pltfm_init(pdev, soc_data->pdata, 0); + if (IS_ERR(host)) + return PTR_ERR(host); + pltfm_host = sdhci_priv(host); + + tegra_host = devm_kzalloc(&pdev->dev, sizeof(*tegra_host), GFP_KERNEL); + if (!tegra_host) { + dev_err(mmc_dev(host->mmc), "failed to allocate tegra_host\n"); + rc = -ENOMEM; + goto err_alloc_tegra_host; + } + tegra_host->soc_data = soc_data; + pltfm_host->priv = tegra_host; + + rc = sdhci_tegra_parse_dt(&pdev->dev); + if (rc) + goto err_parse_dt; + + if (gpio_is_valid(tegra_host->power_gpio)) { + rc = gpio_request(tegra_host->power_gpio, "sdhci_power"); + if (rc) { + dev_err(mmc_dev(host->mmc), + "failed to allocate power gpio\n"); + goto err_power_req; + } + gpio_direction_output(tegra_host->power_gpio, 1); + } + + clk = clk_get(mmc_dev(host->mmc), NULL); + if (IS_ERR(clk)) { + dev_err(mmc_dev(host->mmc), "clk err\n"); + rc = PTR_ERR(clk); + goto err_clk_get; + } + clk_prepare_enable(clk); + pltfm_host->clk = clk; + + rc = sdhci_add_host(host); + if (rc) + goto err_add_host; + + return 0; + +err_add_host: + clk_disable_unprepare(pltfm_host->clk); + clk_put(pltfm_host->clk); +err_clk_get: + if (gpio_is_valid(tegra_host->power_gpio)) + gpio_free(tegra_host->power_gpio); +err_power_req: +err_parse_dt: +err_alloc_tegra_host: + sdhci_pltfm_free(pdev); + return rc; +} + +static int sdhci_tegra_remove(struct platform_device *pdev) +{ + struct sdhci_host *host = platform_get_drvdata(pdev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_tegra *tegra_host = pltfm_host->priv; + int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff); + + sdhci_remove_host(host, dead); + + if (gpio_is_valid(tegra_host->power_gpio)) + gpio_free(tegra_host->power_gpio); + + clk_disable_unprepare(pltfm_host->clk); + clk_put(pltfm_host->clk); + + sdhci_pltfm_free(pdev); + + return 0; +} + +static struct platform_driver sdhci_tegra_driver = { + .driver = { + .name = "sdhci-tegra", + .owner = THIS_MODULE, + .of_match_table = sdhci_tegra_dt_match, + .pm = SDHCI_PLTFM_PMOPS, + }, + .probe = sdhci_tegra_probe, + .remove = sdhci_tegra_remove, +}; + +module_platform_driver(sdhci_tegra_driver); + +MODULE_DESCRIPTION("SDHCI driver for Tegra"); +MODULE_AUTHOR("Google, Inc."); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 782c0ee3c92..47055f3f01b 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -16,14 +16,19 @@ #include <linux/delay.h> #include <linux/highmem.h> #include <linux/io.h> +#include <linux/module.h> #include <linux/dma-mapping.h> #include <linux/slab.h> #include <linux/scatterlist.h> #include <linux/regulator/consumer.h> +#include <linux/pm_runtime.h> #include <linux/leds.h> +#include <linux/mmc/mmc.h> #include <linux/mmc/host.h> +#include <linux/mmc/card.h> +#include <linux/mmc/slot-gpio.h> #include "sdhci.h" @@ -37,56 +42,89 @@ #define SDHCI_USE_LEDS_CLASS #endif +#define MAX_TUNING_LOOP 40 + +#define ADMA_SIZE ((128 * 2 + 1) * 4) + static unsigned int debug_quirks = 0; +static unsigned int debug_quirks2; -static void sdhci_prepare_data(struct sdhci_host *, struct mmc_data *); static void sdhci_finish_data(struct sdhci_host *); -static void sdhci_send_command(struct sdhci_host *, struct mmc_command *); static void sdhci_finish_command(struct sdhci_host *); +static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode); +static void sdhci_tuning_timer(unsigned long data); +static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable); + +#ifdef CONFIG_PM_RUNTIME +static int sdhci_runtime_pm_get(struct sdhci_host *host); +static int sdhci_runtime_pm_put(struct sdhci_host *host); +static void sdhci_runtime_pm_bus_on(struct sdhci_host *host); +static void sdhci_runtime_pm_bus_off(struct sdhci_host *host); +#else +static inline int sdhci_runtime_pm_get(struct sdhci_host *host) +{ + return 0; +} +static inline int sdhci_runtime_pm_put(struct sdhci_host *host) +{ + return 0; +} +static void sdhci_runtime_pm_bus_on(struct sdhci_host *host) +{ +} +static void sdhci_runtime_pm_bus_off(struct sdhci_host *host) +{ +} +#endif static void sdhci_dumpregs(struct sdhci_host *host) { - printk(KERN_DEBUG DRIVER_NAME ": =========== REGISTER DUMP (%s)===========\n", + pr_debug(DRIVER_NAME ": =========== REGISTER DUMP (%s)===========\n", mmc_hostname(host->mmc)); - printk(KERN_DEBUG DRIVER_NAME ": Sys addr: 0x%08x | Version: 0x%08x\n", + pr_debug(DRIVER_NAME ": Sys addr: 0x%08x | Version: 0x%08x\n", sdhci_readl(host, SDHCI_DMA_ADDRESS), sdhci_readw(host, SDHCI_HOST_VERSION)); - printk(KERN_DEBUG DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n", + pr_debug(DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n", sdhci_readw(host, SDHCI_BLOCK_SIZE), sdhci_readw(host, SDHCI_BLOCK_COUNT)); - printk(KERN_DEBUG DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n", + pr_debug(DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n", sdhci_readl(host, SDHCI_ARGUMENT), sdhci_readw(host, SDHCI_TRANSFER_MODE)); - printk(KERN_DEBUG DRIVER_NAME ": Present: 0x%08x | Host ctl: 0x%08x\n", + pr_debug(DRIVER_NAME ": Present: 0x%08x | Host ctl: 0x%08x\n", sdhci_readl(host, SDHCI_PRESENT_STATE), sdhci_readb(host, SDHCI_HOST_CONTROL)); - printk(KERN_DEBUG DRIVER_NAME ": Power: 0x%08x | Blk gap: 0x%08x\n", + pr_debug(DRIVER_NAME ": Power: 0x%08x | Blk gap: 0x%08x\n", sdhci_readb(host, SDHCI_POWER_CONTROL), sdhci_readb(host, SDHCI_BLOCK_GAP_CONTROL)); - printk(KERN_DEBUG DRIVER_NAME ": Wake-up: 0x%08x | Clock: 0x%08x\n", + pr_debug(DRIVER_NAME ": Wake-up: 0x%08x | Clock: 0x%08x\n", sdhci_readb(host, SDHCI_WAKE_UP_CONTROL), sdhci_readw(host, SDHCI_CLOCK_CONTROL)); - printk(KERN_DEBUG DRIVER_NAME ": Timeout: 0x%08x | Int stat: 0x%08x\n", + pr_debug(DRIVER_NAME ": Timeout: 0x%08x | Int stat: 0x%08x\n", sdhci_readb(host, SDHCI_TIMEOUT_CONTROL), sdhci_readl(host, SDHCI_INT_STATUS)); - printk(KERN_DEBUG DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n", + pr_debug(DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n", sdhci_readl(host, SDHCI_INT_ENABLE), sdhci_readl(host, SDHCI_SIGNAL_ENABLE)); - printk(KERN_DEBUG DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n", + pr_debug(DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n", sdhci_readw(host, SDHCI_ACMD12_ERR), sdhci_readw(host, SDHCI_SLOT_INT_STATUS)); - printk(KERN_DEBUG DRIVER_NAME ": Caps: 0x%08x | Max curr: 0x%08x\n", + pr_debug(DRIVER_NAME ": Caps: 0x%08x | Caps_1: 0x%08x\n", sdhci_readl(host, SDHCI_CAPABILITIES), + sdhci_readl(host, SDHCI_CAPABILITIES_1)); + pr_debug(DRIVER_NAME ": Cmd: 0x%08x | Max curr: 0x%08x\n", + sdhci_readw(host, SDHCI_COMMAND), sdhci_readl(host, SDHCI_MAX_CURRENT)); + pr_debug(DRIVER_NAME ": Host ctl2: 0x%08x\n", + sdhci_readw(host, SDHCI_HOST_CONTROL2)); if (host->flags & SDHCI_USE_ADMA) - printk(KERN_DEBUG DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n", + pr_debug(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n", readl(host->ioaddr + SDHCI_ADMA_ERROR), readl(host->ioaddr + SDHCI_ADMA_ADDRESS)); - printk(KERN_DEBUG DRIVER_NAME ": ===========================================\n"); + pr_debug(DRIVER_NAME ": ===========================================\n"); } /*****************************************************************************\ @@ -95,38 +133,26 @@ static void sdhci_dumpregs(struct sdhci_host *host) * * \*****************************************************************************/ -static void sdhci_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set) -{ - u32 ier; - - ier = sdhci_readl(host, SDHCI_INT_ENABLE); - ier &= ~clear; - ier |= set; - sdhci_writel(host, ier, SDHCI_INT_ENABLE); - sdhci_writel(host, ier, SDHCI_SIGNAL_ENABLE); -} - -static void sdhci_unmask_irqs(struct sdhci_host *host, u32 irqs) -{ - sdhci_clear_set_irqs(host, 0, irqs); -} - -static void sdhci_mask_irqs(struct sdhci_host *host, u32 irqs) -{ - sdhci_clear_set_irqs(host, irqs, 0); -} - static void sdhci_set_card_detection(struct sdhci_host *host, bool enable) { - u32 irqs = SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT; + u32 present; - if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) + if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) || + (host->mmc->caps & MMC_CAP_NONREMOVABLE)) return; - if (enable) - sdhci_unmask_irqs(host, irqs); - else - sdhci_mask_irqs(host, irqs); + if (enable) { + present = sdhci_readl(host, SDHCI_PRESENT_STATE) & + SDHCI_CARD_PRESENT; + + host->ier |= present ? SDHCI_INT_CARD_REMOVE : + SDHCI_INT_CARD_INSERT; + } else { + host->ier &= ~(SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT); + } + + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); } static void sdhci_enable_card_detection(struct sdhci_host *host) @@ -139,24 +165,18 @@ static void sdhci_disable_card_detection(struct sdhci_host *host) sdhci_set_card_detection(host, false); } -static void sdhci_reset(struct sdhci_host *host, u8 mask) +void sdhci_reset(struct sdhci_host *host, u8 mask) { unsigned long timeout; - u32 uninitialized_var(ier); - - if (host->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) { - if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & - SDHCI_CARD_PRESENT)) - return; - } - - if (host->quirks & SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET) - ier = sdhci_readl(host, SDHCI_INT_ENABLE); sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET); - if (mask & SDHCI_RESET_ALL) + if (mask & SDHCI_RESET_ALL) { host->clock = 0; + /* Reset-all turns off SD Bus Power */ + if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON) + sdhci_runtime_pm_bus_off(host); + } /* Wait max 100 ms */ timeout = 100; @@ -164,7 +184,7 @@ static void sdhci_reset(struct sdhci_host *host, u8 mask) /* hw clears the bit when it's done */ while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) { if (timeout == 0) { - printk(KERN_ERR "%s: Reset 0x%x never completed.\n", + pr_err("%s: Reset 0x%x never completed.\n", mmc_hostname(host->mmc), (int)mask); sdhci_dumpregs(host); return; @@ -172,9 +192,28 @@ static void sdhci_reset(struct sdhci_host *host, u8 mask) timeout--; mdelay(1); } +} +EXPORT_SYMBOL_GPL(sdhci_reset); + +static void sdhci_do_reset(struct sdhci_host *host, u8 mask) +{ + if (host->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) { + if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & + SDHCI_CARD_PRESENT)) + return; + } - if (host->quirks & SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET) - sdhci_clear_set_irqs(host, SDHCI_INT_ALL_MASK, ier); + host->ops->reset(host, mask); + + if (mask & SDHCI_RESET_ALL) { + if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) { + if (host->ops->enable_dma) + host->ops->enable_dma(host); + } + + /* Resetting the controller clears many */ + host->preset_enabled = false; + } } static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios); @@ -182,15 +221,18 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios); static void sdhci_init(struct sdhci_host *host, int soft) { if (soft) - sdhci_reset(host, SDHCI_RESET_CMD|SDHCI_RESET_DATA); + sdhci_do_reset(host, SDHCI_RESET_CMD|SDHCI_RESET_DATA); else - sdhci_reset(host, SDHCI_RESET_ALL); + sdhci_do_reset(host, SDHCI_RESET_ALL); + + host->ier = SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT | + SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | + SDHCI_INT_INDEX | SDHCI_INT_END_BIT | SDHCI_INT_CRC | + SDHCI_INT_TIMEOUT | SDHCI_INT_DATA_END | + SDHCI_INT_RESPONSE; - sdhci_clear_set_irqs(host, SDHCI_INT_ALL_MASK, - SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT | - SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX | - SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT | - SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE); + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); if (soft) { /* force clock reconfiguration */ @@ -202,6 +244,19 @@ static void sdhci_init(struct sdhci_host *host, int soft) static void sdhci_reinit(struct sdhci_host *host) { sdhci_init(host, 0); + /* + * Retuning stuffs are affected by different cards inserted and only + * applicable to UHS-I cards. So reset these fields to their initial + * value when card is removed. + */ + if (host->flags & SDHCI_USING_RETUNING_TIMER) { + host->flags &= ~SDHCI_USING_RETUNING_TIMER; + + del_timer_sync(&host->tuning_timer); + host->flags &= ~SDHCI_NEEDS_RETUNING; + host->mmc->max_blk_count = + (host->quirks & SDHCI_QUIRK_NO_MULTIBLOCK) ? 1 : 65535; + } sdhci_enable_card_detection(host); } @@ -232,11 +287,14 @@ static void sdhci_led_control(struct led_classdev *led, spin_lock_irqsave(&host->lock, flags); + if (host->runtime_suspended) + goto out; + if (brightness == LED_OFF) sdhci_deactivate_led(host); else sdhci_activate_led(host); - +out: spin_unlock_irqrestore(&host->lock, flags); } #endif @@ -381,12 +439,12 @@ static void sdhci_transfer_pio(struct sdhci_host *host) static char *sdhci_kmap_atomic(struct scatterlist *sg, unsigned long *flags) { local_irq_save(*flags); - return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset; + return kmap_atomic(sg_page(sg)) + sg->offset; } static void sdhci_kunmap_atomic(void *buffer, unsigned long *flags) { - kunmap_atomic(buffer, KM_BIO_SRC_IRQ); + kunmap_atomic(buffer); local_irq_restore(*flags); } @@ -430,11 +488,6 @@ static int sdhci_adma_table_pre(struct sdhci_host *host, else direction = DMA_TO_DEVICE; - /* - * The ADMA descriptor table is mapped further down as we - * need to fill it with data first. - */ - host->align_addr = dma_map_single(mmc_dev(host->mmc), host->align_buffer, 128 * 4, direction); if (dma_mapping_error(mmc_dev(host->mmc), host->align_addr)) @@ -495,7 +548,7 @@ static int sdhci_adma_table_pre(struct sdhci_host *host, * If this triggers then we have a calculation bug * somewhere. :/ */ - WARN_ON((desc - host->adma_desc) > (128 * 2 + 1) * 4); + WARN_ON((desc - host->adma_desc) > ADMA_SIZE); } if (host->quirks & SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC) { @@ -523,17 +576,8 @@ static int sdhci_adma_table_pre(struct sdhci_host *host, host->align_addr, 128 * 4, direction); } - host->adma_addr = dma_map_single(mmc_dev(host->mmc), - host->adma_desc, (128 * 2 + 1) * 4, DMA_TO_DEVICE); - if (dma_mapping_error(mmc_dev(host->mmc), host->adma_addr)) - goto unmap_entries; - BUG_ON(host->adma_addr & 0x3); - return 0; -unmap_entries: - dma_unmap_sg(mmc_dev(host->mmc), data->sg, - data->sg_len, direction); unmap_align: dma_unmap_single(mmc_dev(host->mmc), host->align_addr, 128 * 4, direction); @@ -551,19 +595,25 @@ static void sdhci_adma_table_post(struct sdhci_host *host, u8 *align; char *buffer; unsigned long flags; + bool has_unaligned; if (data->flags & MMC_DATA_READ) direction = DMA_FROM_DEVICE; else direction = DMA_TO_DEVICE; - dma_unmap_single(mmc_dev(host->mmc), host->adma_addr, - (128 * 2 + 1) * 4, DMA_TO_DEVICE); - dma_unmap_single(mmc_dev(host->mmc), host->align_addr, 128 * 4, direction); - if (data->flags & MMC_DATA_READ) { + /* Do a quick scan of the SG list for any unaligned mappings */ + has_unaligned = false; + for_each_sg(data->sg, sg, host->sg_count, i) + if (sg_dma_address(sg) & 3) { + has_unaligned = true; + break; + } + + if (has_unaligned && data->flags & MMC_DATA_READ) { dma_sync_sg_for_cpu(mmc_dev(host->mmc), data->sg, data->sg_len, direction); @@ -587,9 +637,10 @@ static void sdhci_adma_table_post(struct sdhci_host *host, data->sg_len, direction); } -static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data) +static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd) { u8 count; + struct mmc_data *data = cmd->data; unsigned target_timeout, current_timeout; /* @@ -601,12 +652,18 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data) if (host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL) return 0xE; - /* timeout in us */ - target_timeout = data->timeout_ns / 1000 + - data->timeout_clks / host->clock; + /* Unspecified timeout, assume max */ + if (!data && !cmd->busy_timeout) + return 0xE; - if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK) - host->timeout_clk = host->clock / 1000; + /* timeout in us */ + if (!data) + target_timeout = cmd->busy_timeout * 1000; + else { + target_timeout = data->timeout_ns / 1000; + if (host->clock) + target_timeout += data->timeout_clks / host->clock; + } /* * Figure out needed cycles. @@ -628,8 +685,8 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data) } if (count >= 0xF) { - printk(KERN_WARNING "%s: Too large timeout requested!\n", - mmc_hostname(host->mmc)); + DBG("%s: Too large timeout 0x%x requested for CMD%d!\n", + mmc_hostname(host->mmc), count, cmd->opcode); count = 0xE; } @@ -642,20 +699,29 @@ static void sdhci_set_transfer_irqs(struct sdhci_host *host) u32 dma_irqs = SDHCI_INT_DMA_END | SDHCI_INT_ADMA_ERROR; if (host->flags & SDHCI_REQ_USE_DMA) - sdhci_clear_set_irqs(host, pio_irqs, dma_irqs); + host->ier = (host->ier & ~pio_irqs) | dma_irqs; else - sdhci_clear_set_irqs(host, dma_irqs, pio_irqs); + host->ier = (host->ier & ~dma_irqs) | pio_irqs; + + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); } -static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) +static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) { u8 count; u8 ctrl; + struct mmc_data *data = cmd->data; int ret; WARN_ON(host->data); - if (data == NULL) + if (data || (cmd->flags & MMC_RSP_BUSY)) { + count = sdhci_calc_timeout(host, cmd); + sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL); + } + + if (!data) return; /* Sanity checks */ @@ -665,9 +731,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) host->data = data; host->data_early = 0; - - count = sdhci_calc_timeout(host, data); - sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL); + host->data->bytes_xfered = 0; if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) host->flags |= SDHCI_REQ_USE_DMA; @@ -803,28 +867,43 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) sdhci_set_transfer_irqs(host); - /* We do not handle DMA boundaries, so set it to max (512 KiB) */ - sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, data->blksz), SDHCI_BLOCK_SIZE); + /* Set the DMA boundary value and block size */ + sdhci_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG, + data->blksz), SDHCI_BLOCK_SIZE); sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT); } static void sdhci_set_transfer_mode(struct sdhci_host *host, - struct mmc_data *data) + struct mmc_command *cmd) { u16 mode; + struct mmc_data *data = cmd->data; - if (data == NULL) + if (data == NULL) { + /* clear Auto CMD settings for no data CMDs */ + mode = sdhci_readw(host, SDHCI_TRANSFER_MODE); + sdhci_writew(host, mode & ~(SDHCI_TRNS_AUTO_CMD12 | + SDHCI_TRNS_AUTO_CMD23), SDHCI_TRANSFER_MODE); return; + } WARN_ON(!host->data); mode = SDHCI_TRNS_BLK_CNT_EN; - if (data->blocks > 1) { - if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12) - mode |= SDHCI_TRNS_MULTI | SDHCI_TRNS_ACMD12; - else - mode |= SDHCI_TRNS_MULTI; + if (mmc_op_multi(cmd->opcode) || data->blocks > 1) { + mode |= SDHCI_TRNS_MULTI; + /* + * If we are sending CMD23, CMD12 never gets sent + * on successful completion (so no Auto-CMD12). + */ + if (!host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD12)) + mode |= SDHCI_TRNS_AUTO_CMD12; + else if (host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD23)) { + mode |= SDHCI_TRNS_AUTO_CMD23; + sdhci_writel(host, host->mrq->sbc->arg, SDHCI_ARGUMENT2); + } } + if (data->flags & MMC_DATA_READ) mode |= SDHCI_TRNS_READ; if (host->flags & SDHCI_REQ_USE_DMA) @@ -864,14 +943,22 @@ static void sdhci_finish_data(struct sdhci_host *host) else data->bytes_xfered = data->blksz * data->blocks; - if (data->stop) { + /* + * Need to send CMD12 if - + * a) open-ended multiblock transfer (no CMD23) + * b) error in multiblock transfer + */ + if (data->stop && + (data->error || + !host->mrq->sbc)) { + /* * The controller needs a reset of internal state machines * upon error conditions. */ if (data->error) { - sdhci_reset(host, SDHCI_RESET_CMD); - sdhci_reset(host, SDHCI_RESET_DATA); + sdhci_do_reset(host, SDHCI_RESET_CMD); + sdhci_do_reset(host, SDHCI_RESET_DATA); } sdhci_send_command(host, data->stop); @@ -879,7 +966,7 @@ static void sdhci_finish_data(struct sdhci_host *host) tasklet_schedule(&host->finish_tasklet); } -static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) +void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) { int flags; u32 mask; @@ -901,7 +988,7 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) { if (timeout == 0) { - printk(KERN_ERR "%s: Controller never released " + pr_err("%s: Controller never released " "inhibit bit(s).\n", mmc_hostname(host->mmc)); sdhci_dumpregs(host); cmd->error = -EIO; @@ -912,18 +999,23 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) mdelay(1); } - mod_timer(&host->timer, jiffies + 10 * HZ); + timeout = jiffies; + if (!cmd->data && cmd->busy_timeout > 9000) + timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ; + else + timeout += 10 * HZ; + mod_timer(&host->timer, timeout); host->cmd = cmd; - sdhci_prepare_data(host, cmd->data); + sdhci_prepare_data(host, cmd); sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT); - sdhci_set_transfer_mode(host, cmd->data); + sdhci_set_transfer_mode(host, cmd); if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) { - printk(KERN_ERR "%s: Unsupported response type!\n", + pr_err("%s: Unsupported response type!\n", mmc_hostname(host->mmc)); cmd->error = -EINVAL; tasklet_schedule(&host->finish_tasklet); @@ -943,11 +1035,15 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) flags |= SDHCI_CMD_CRC; if (cmd->flags & MMC_RSP_OPCODE) flags |= SDHCI_CMD_INDEX; - if (cmd->data) + + /* CMD19 is special in that the Data Present Select should be set */ + if (cmd->data || cmd->opcode == MMC_SEND_TUNING_BLOCK || + cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200) flags |= SDHCI_CMD_DATA; sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND); } +EXPORT_SYMBOL_GPL(sdhci_send_command); static void sdhci_finish_command(struct sdhci_host *host) { @@ -973,44 +1069,117 @@ static void sdhci_finish_command(struct sdhci_host *host) host->cmd->error = 0; - if (host->data && host->data_early) - sdhci_finish_data(host); + /* Finished CMD23, now send actual command. */ + if (host->cmd == host->mrq->sbc) { + host->cmd = NULL; + sdhci_send_command(host, host->mrq->cmd); + } else { - if (!host->cmd->data) - tasklet_schedule(&host->finish_tasklet); + /* Processed actual command. */ + if (host->data && host->data_early) + sdhci_finish_data(host); - host->cmd = NULL; + if (!host->cmd->data) + tasklet_schedule(&host->finish_tasklet); + + host->cmd = NULL; + } } -static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) +static u16 sdhci_get_preset_value(struct sdhci_host *host) { - int div; - u16 clk; - unsigned long timeout; + u16 preset = 0; + + switch (host->timing) { + case MMC_TIMING_UHS_SDR12: + preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR12); + break; + case MMC_TIMING_UHS_SDR25: + preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR25); + break; + case MMC_TIMING_UHS_SDR50: + preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR50); + break; + case MMC_TIMING_UHS_SDR104: + case MMC_TIMING_MMC_HS200: + preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR104); + break; + case MMC_TIMING_UHS_DDR50: + preset = sdhci_readw(host, SDHCI_PRESET_FOR_DDR50); + break; + default: + pr_warn("%s: Invalid UHS-I mode selected\n", + mmc_hostname(host->mmc)); + preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR12); + break; + } + return preset; +} - if (clock == host->clock) - return; +void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) +{ + int div = 0; /* Initialized for compiler warning */ + int real_div = div, clk_mul = 1; + u16 clk = 0; + unsigned long timeout; - if (host->ops->set_clock) { - host->ops->set_clock(host, clock); - if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK) - return; - } + host->mmc->actual_clock = 0; sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); if (clock == 0) - goto out; + return; if (host->version >= SDHCI_SPEC_300) { - /* Version 3.00 divisors must be a multiple of 2. */ - if (host->max_clk <= clock) - div = 1; - else { - for (div = 2; div < SDHCI_MAX_DIV_SPEC_300; div += 2) { - if ((host->max_clk / div) <= clock) + if (host->preset_enabled) { + u16 pre_val; + + clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + pre_val = sdhci_get_preset_value(host); + div = (pre_val & SDHCI_PRESET_SDCLK_FREQ_MASK) + >> SDHCI_PRESET_SDCLK_FREQ_SHIFT; + if (host->clk_mul && + (pre_val & SDHCI_PRESET_CLKGEN_SEL_MASK)) { + clk = SDHCI_PROG_CLOCK_MODE; + real_div = div + 1; + clk_mul = host->clk_mul; + } else { + real_div = max_t(int, 1, div << 1); + } + goto clock_set; + } + + /* + * Check if the Host Controller supports Programmable Clock + * Mode. + */ + if (host->clk_mul) { + for (div = 1; div <= 1024; div++) { + if ((host->max_clk * host->clk_mul / div) + <= clock) break; } + /* + * Set Programmable Clock Mode in the Clock + * Control register. + */ + clk = SDHCI_PROG_CLOCK_MODE; + real_div = div; + clk_mul = host->clk_mul; + div--; + } else { + /* Version 3.00 divisors must be a multiple of 2. */ + if (host->max_clk <= clock) + div = 1; + else { + for (div = 2; div < SDHCI_MAX_DIV_SPEC_300; + div += 2) { + if ((host->max_clk / div) <= clock) + break; + } + } + real_div = div; + div >>= 1; } } else { /* Version 2.00 divisors must be a power of 2. */ @@ -1018,10 +1187,15 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) if ((host->max_clk / div) <= clock) break; } + real_div = div; + div >>= 1; } - div >>= 1; - clk = (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT; +clock_set: + if (real_div) + host->mmc->actual_clock = (host->max_clk * clk_mul) / real_div; + + clk |= (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT; clk |= ((div & SDHCI_DIV_HI_MASK) >> SDHCI_DIV_MASK_LEN) << SDHCI_DIVIDER_HI_SHIFT; clk |= SDHCI_CLOCK_INT_EN; @@ -1032,7 +1206,7 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL)) & SDHCI_CLOCK_INT_STABLE)) { if (timeout == 0) { - printk(KERN_ERR "%s: Internal clock never " + pr_err("%s: Internal clock never " "stabilised.\n", mmc_hostname(host->mmc)); sdhci_dumpregs(host); return; @@ -1043,17 +1217,16 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) clk |= SDHCI_CLOCK_CARD_EN; sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); - -out: - host->clock = clock; } +EXPORT_SYMBOL_GPL(sdhci_set_clock); -static void sdhci_set_power(struct sdhci_host *host, unsigned short power) +static void sdhci_set_power(struct sdhci_host *host, unsigned char mode, + unsigned short vdd) { u8 pwr = 0; - if (power != (unsigned short)-1) { - switch (1 << power) { + if (mode != MMC_POWER_OFF) { + switch (1 << vdd) { case MMC_VDD_165_195: pwr = SDHCI_POWER_180; break; @@ -1077,33 +1250,45 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power) if (pwr == 0) { sdhci_writeb(host, 0, SDHCI_POWER_CONTROL); - return; - } + if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON) + sdhci_runtime_pm_bus_off(host); + vdd = 0; + } else { + /* + * Spec says that we should clear the power reg before setting + * a new value. Some controllers don't seem to like this though. + */ + if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE)) + sdhci_writeb(host, 0, SDHCI_POWER_CONTROL); - /* - * Spec says that we should clear the power reg before setting - * a new value. Some controllers don't seem to like this though. - */ - if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE)) - sdhci_writeb(host, 0, SDHCI_POWER_CONTROL); + /* + * At least the Marvell CaFe chip gets confused if we set the + * voltage and set turn on power at the same time, so set the + * voltage first. + */ + if (host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER) + sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); + + pwr |= SDHCI_POWER_ON; - /* - * At least the Marvell CaFe chip gets confused if we set the voltage - * and set turn on power at the same time, so set the voltage first. - */ - if (host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER) sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); - pwr |= SDHCI_POWER_ON; + if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON) + sdhci_runtime_pm_bus_on(host); - sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); + /* + * Some controllers need an extra 10ms delay of 10ms before + * they can apply clock after applying power + */ + if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER) + mdelay(10); + } - /* - * Some controllers need an extra 10ms delay of 10ms before they - * can apply clock after applying power - */ - if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER) - mdelay(10); + if (host->vmmc) { + spin_unlock_irq(&host->lock); + mmc_regulator_set_ocr(host->mmc, host->vmmc, vdd); + spin_lock_irq(&host->lock); + } } /*****************************************************************************\ @@ -1115,11 +1300,14 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power) static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) { struct sdhci_host *host; - bool present; + int present; unsigned long flags; + u32 tuning_opcode; host = mmc_priv(mmc); + sdhci_runtime_pm_get(host); + spin_lock_irqsave(&host->lock, flags); WARN_ON(host->mrq != NULL); @@ -1127,7 +1315,12 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) #ifndef SDHCI_USE_LEDS_CLASS sdhci_activate_led(host); #endif - if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12) { + + /* + * Ensure we don't send the STOP for non-SET_BLOCK_COUNTED + * requests if Auto-CMD12 is enabled. + */ + if (!mrq->sbc && (host->flags & SDHCI_AUTO_CMD12)) { if (mrq->stop) { mrq->data->stop = NULL; mrq->stop = NULL; @@ -1136,35 +1329,126 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) host->mrq = mrq; - /* If polling, assume that the card is always present. */ - if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) - present = true; - else - present = sdhci_readl(host, SDHCI_PRESENT_STATE) & - SDHCI_CARD_PRESENT; + /* + * Firstly check card presence from cd-gpio. The return could + * be one of the following possibilities: + * negative: cd-gpio is not available + * zero: cd-gpio is used, and card is removed + * one: cd-gpio is used, and card is present + */ + present = mmc_gpio_get_cd(host->mmc); + if (present < 0) { + /* If polling, assume that the card is always present. */ + if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) + present = 1; + else + present = sdhci_readl(host, SDHCI_PRESENT_STATE) & + SDHCI_CARD_PRESENT; + } if (!present || host->flags & SDHCI_DEVICE_DEAD) { host->mrq->cmd->error = -ENOMEDIUM; tasklet_schedule(&host->finish_tasklet); - } else - sdhci_send_command(host, mrq->cmd); + } else { + u32 present_state; + + present_state = sdhci_readl(host, SDHCI_PRESENT_STATE); + /* + * Check if the re-tuning timer has already expired and there + * is no on-going data transfer. If so, we need to execute + * tuning procedure before sending command. + */ + if ((host->flags & SDHCI_NEEDS_RETUNING) && + !(present_state & (SDHCI_DOING_WRITE | SDHCI_DOING_READ))) { + if (mmc->card) { + /* eMMC uses cmd21 but sd and sdio use cmd19 */ + tuning_opcode = + mmc->card->type == MMC_TYPE_MMC ? + MMC_SEND_TUNING_BLOCK_HS200 : + MMC_SEND_TUNING_BLOCK; + + /* Here we need to set the host->mrq to NULL, + * in case the pending finish_tasklet + * finishes it incorrectly. + */ + host->mrq = NULL; + + spin_unlock_irqrestore(&host->lock, flags); + sdhci_execute_tuning(mmc, tuning_opcode); + spin_lock_irqsave(&host->lock, flags); + + /* Restore original mmc_request structure */ + host->mrq = mrq; + } + } + + if (mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23)) + sdhci_send_command(host, mrq->sbc); + else + sdhci_send_command(host, mrq->cmd); + } mmiowb(); spin_unlock_irqrestore(&host->lock, flags); } -static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +void sdhci_set_bus_width(struct sdhci_host *host, int width) { - struct sdhci_host *host; - unsigned long flags; u8 ctrl; - host = mmc_priv(mmc); + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); + if (width == MMC_BUS_WIDTH_8) { + ctrl &= ~SDHCI_CTRL_4BITBUS; + if (host->version >= SDHCI_SPEC_300) + ctrl |= SDHCI_CTRL_8BITBUS; + } else { + if (host->version >= SDHCI_SPEC_300) + ctrl &= ~SDHCI_CTRL_8BITBUS; + if (width == MMC_BUS_WIDTH_4) + ctrl |= SDHCI_CTRL_4BITBUS; + else + ctrl &= ~SDHCI_CTRL_4BITBUS; + } + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); +} +EXPORT_SYMBOL_GPL(sdhci_set_bus_width); + +void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing) +{ + u16 ctrl_2; + + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + /* Select Bus Speed Mode for host */ + ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; + if ((timing == MMC_TIMING_MMC_HS200) || + (timing == MMC_TIMING_UHS_SDR104)) + ctrl_2 |= SDHCI_CTRL_UHS_SDR104; + else if (timing == MMC_TIMING_UHS_SDR12) + ctrl_2 |= SDHCI_CTRL_UHS_SDR12; + else if (timing == MMC_TIMING_UHS_SDR25) + ctrl_2 |= SDHCI_CTRL_UHS_SDR25; + else if (timing == MMC_TIMING_UHS_SDR50) + ctrl_2 |= SDHCI_CTRL_UHS_SDR50; + else if ((timing == MMC_TIMING_UHS_DDR50) || + (timing == MMC_TIMING_MMC_DDR52)) + ctrl_2 |= SDHCI_CTRL_UHS_DDR50; + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); +} +EXPORT_SYMBOL_GPL(sdhci_set_uhs_signaling); + +static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios) +{ + unsigned long flags; + u8 ctrl; spin_lock_irqsave(&host->lock, flags); - if (host->flags & SDHCI_DEVICE_DEAD) - goto out; + if (host->flags & SDHCI_DEVICE_DEAD) { + spin_unlock_irqrestore(&host->lock, flags); + if (host->vmmc && ios->power_mode == MMC_POWER_OFF) + mmc_regulator_set_ocr(host->mmc, host->vmmc, 0); + return; + } /* * Reset the chip on each power off. @@ -1175,27 +1459,24 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) sdhci_reinit(host); } - sdhci_set_clock(host, ios->clock); + if (host->version >= SDHCI_SPEC_300 && + (ios->power_mode == MMC_POWER_UP) && + !(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN)) + sdhci_enable_preset_value(host, false); - if (ios->power_mode == MMC_POWER_OFF) - sdhci_set_power(host, -1); - else - sdhci_set_power(host, ios->vdd); + if (!ios->clock || ios->clock != host->clock) { + host->ops->set_clock(host, ios->clock); + host->clock = ios->clock; + } + + sdhci_set_power(host, ios->power_mode, ios->vdd); if (host->ops->platform_send_init_74_clocks) host->ops->platform_send_init_74_clocks(host, ios->power_mode); - ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); + host->ops->set_bus_width(host, ios->bus_width); - if (ios->bus_width == MMC_BUS_WIDTH_8) - ctrl |= SDHCI_CTRL_8BITBUS; - else - ctrl &= ~SDHCI_CTRL_8BITBUS; - - if (ios->bus_width == MMC_BUS_WIDTH_4) - ctrl |= SDHCI_CTRL_4BITBUS; - else - ctrl &= ~SDHCI_CTRL_4BITBUS; + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); if ((ios->timing == MMC_TIMING_SD_HS || ios->timing == MMC_TIMING_MMC_HS) @@ -1204,7 +1485,78 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) else ctrl &= ~SDHCI_CTRL_HISPD; - sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); + if (host->version >= SDHCI_SPEC_300) { + u16 clk, ctrl_2; + + /* In case of UHS-I modes, set High Speed Enable */ + if ((ios->timing == MMC_TIMING_MMC_HS200) || + (ios->timing == MMC_TIMING_MMC_DDR52) || + (ios->timing == MMC_TIMING_UHS_SDR50) || + (ios->timing == MMC_TIMING_UHS_SDR104) || + (ios->timing == MMC_TIMING_UHS_DDR50) || + (ios->timing == MMC_TIMING_UHS_SDR25)) + ctrl |= SDHCI_CTRL_HISPD; + + if (!host->preset_enabled) { + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); + /* + * We only need to set Driver Strength if the + * preset value enable is not set. + */ + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + ctrl_2 &= ~SDHCI_CTRL_DRV_TYPE_MASK; + if (ios->drv_type == MMC_SET_DRIVER_TYPE_A) + ctrl_2 |= SDHCI_CTRL_DRV_TYPE_A; + else if (ios->drv_type == MMC_SET_DRIVER_TYPE_C) + ctrl_2 |= SDHCI_CTRL_DRV_TYPE_C; + + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); + } else { + /* + * According to SDHC Spec v3.00, if the Preset Value + * Enable in the Host Control 2 register is set, we + * need to reset SD Clock Enable before changing High + * Speed Enable to avoid generating clock gliches. + */ + + /* Reset SD Clock Enable */ + clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + clk &= ~SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); + + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); + + /* Re-enable SD Clock */ + host->ops->set_clock(host, host->clock); + } + + + /* Reset SD Clock Enable */ + clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + clk &= ~SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); + + host->ops->set_uhs_signaling(host, ios->timing); + host->timing = ios->timing; + + if (!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN) && + ((ios->timing == MMC_TIMING_UHS_SDR12) || + (ios->timing == MMC_TIMING_UHS_SDR25) || + (ios->timing == MMC_TIMING_UHS_SDR50) || + (ios->timing == MMC_TIMING_UHS_SDR104) || + (ios->timing == MMC_TIMING_UHS_DDR50))) { + u16 preset; + + sdhci_enable_preset_value(host, true); + preset = sdhci_get_preset_value(host); + ios->drv_type = (preset & SDHCI_PRESET_DRV_MASK) + >> SDHCI_PRESET_DRV_SHIFT; + } + + /* Re-enable SD Clock */ + host->ops->set_clock(host, host->clock); + } else + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); /* * Some (ENE) controllers go apeshit on some ios operation, @@ -1212,21 +1564,57 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) * it on each ios seems to solve the problem. */ if(host->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS) - sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA); + sdhci_do_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA); -out: mmiowb(); spin_unlock_irqrestore(&host->lock, flags); } -static int sdhci_get_ro(struct mmc_host *mmc) +static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct sdhci_host *host = mmc_priv(mmc); + + sdhci_runtime_pm_get(host); + sdhci_do_set_ios(host, ios); + sdhci_runtime_pm_put(host); +} + +static int sdhci_do_get_cd(struct sdhci_host *host) +{ + int gpio_cd = mmc_gpio_get_cd(host->mmc); + + if (host->flags & SDHCI_DEVICE_DEAD) + return 0; + + /* If polling/nonremovable, assume that the card is always present. */ + if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) || + (host->mmc->caps & MMC_CAP_NONREMOVABLE)) + return 1; + + /* Try slot gpio detect */ + if (!IS_ERR_VALUE(gpio_cd)) + return !!gpio_cd; + + /* Host native card detect */ + return !!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT); +} + +static int sdhci_get_cd(struct mmc_host *mmc) +{ + struct sdhci_host *host = mmc_priv(mmc); + int ret; + + sdhci_runtime_pm_get(host); + ret = sdhci_do_get_cd(host); + sdhci_runtime_pm_put(host); + return ret; +} + +static int sdhci_check_ro(struct sdhci_host *host) { - struct sdhci_host *host; unsigned long flags; int is_readonly; - host = mmc_priv(mmc); - spin_lock_irqsave(&host->lock, flags); if (host->flags & SDHCI_DEVICE_DEAD) @@ -1244,70 +1632,464 @@ static int sdhci_get_ro(struct mmc_host *mmc) !is_readonly : is_readonly; } +#define SAMPLE_COUNT 5 + +static int sdhci_do_get_ro(struct sdhci_host *host) +{ + int i, ro_count; + + if (!(host->quirks & SDHCI_QUIRK_UNSTABLE_RO_DETECT)) + return sdhci_check_ro(host); + + ro_count = 0; + for (i = 0; i < SAMPLE_COUNT; i++) { + if (sdhci_check_ro(host)) { + if (++ro_count > SAMPLE_COUNT / 2) + return 1; + } + msleep(30); + } + return 0; +} + +static void sdhci_hw_reset(struct mmc_host *mmc) +{ + struct sdhci_host *host = mmc_priv(mmc); + + if (host->ops && host->ops->hw_reset) + host->ops->hw_reset(host); +} + +static int sdhci_get_ro(struct mmc_host *mmc) +{ + struct sdhci_host *host = mmc_priv(mmc); + int ret; + + sdhci_runtime_pm_get(host); + ret = sdhci_do_get_ro(host); + sdhci_runtime_pm_put(host); + return ret; +} + +static void sdhci_enable_sdio_irq_nolock(struct sdhci_host *host, int enable) +{ + if (!(host->flags & SDHCI_DEVICE_DEAD)) { + if (enable) + host->ier |= SDHCI_INT_CARD_INT; + else + host->ier &= ~SDHCI_INT_CARD_INT; + + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); + mmiowb(); + } +} + static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable) { - struct sdhci_host *host; + struct sdhci_host *host = mmc_priv(mmc); unsigned long flags; - host = mmc_priv(mmc); + sdhci_runtime_pm_get(host); spin_lock_irqsave(&host->lock, flags); - - if (host->flags & SDHCI_DEVICE_DEAD) - goto out; - if (enable) - sdhci_unmask_irqs(host, SDHCI_INT_CARD_INT); + host->flags |= SDHCI_SDIO_IRQ_ENABLED; else - sdhci_mask_irqs(host, SDHCI_INT_CARD_INT); -out: - mmiowb(); + host->flags &= ~SDHCI_SDIO_IRQ_ENABLED; + sdhci_enable_sdio_irq_nolock(host, enable); spin_unlock_irqrestore(&host->lock, flags); + + sdhci_runtime_pm_put(host); } -static const struct mmc_host_ops sdhci_ops = { - .request = sdhci_request, - .set_ios = sdhci_set_ios, - .get_ro = sdhci_get_ro, - .enable_sdio_irq = sdhci_enable_sdio_irq, -}; +static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host, + struct mmc_ios *ios) +{ + u16 ctrl; + int ret; -/*****************************************************************************\ - * * - * Tasklets * - * * -\*****************************************************************************/ + /* + * Signal Voltage Switching is only applicable for Host Controllers + * v3.00 and above. + */ + if (host->version < SDHCI_SPEC_300) + return 0; -static void sdhci_tasklet_card(unsigned long param) -{ - struct sdhci_host *host; - unsigned long flags; + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); - host = (struct sdhci_host*)param; + switch (ios->signal_voltage) { + case MMC_SIGNAL_VOLTAGE_330: + /* Set 1.8V Signal Enable in the Host Control2 register to 0 */ + ctrl &= ~SDHCI_CTRL_VDD_180; + sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); - spin_lock_irqsave(&host->lock, flags); + if (host->vqmmc) { + ret = regulator_set_voltage(host->vqmmc, 2700000, 3600000); + if (ret) { + pr_warning("%s: Switching to 3.3V signalling voltage " + " failed\n", mmc_hostname(host->mmc)); + return -EIO; + } + } + /* Wait for 5ms */ + usleep_range(5000, 5500); - if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) { - if (host->mrq) { - printk(KERN_ERR "%s: Card removed during transfer!\n", + /* 3.3V regulator output should be stable within 5 ms */ + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + if (!(ctrl & SDHCI_CTRL_VDD_180)) + return 0; + + pr_warning("%s: 3.3V regulator output did not became stable\n", mmc_hostname(host->mmc)); - printk(KERN_ERR "%s: Resetting controller.\n", + + return -EAGAIN; + case MMC_SIGNAL_VOLTAGE_180: + if (host->vqmmc) { + ret = regulator_set_voltage(host->vqmmc, + 1700000, 1950000); + if (ret) { + pr_warning("%s: Switching to 1.8V signalling voltage " + " failed\n", mmc_hostname(host->mmc)); + return -EIO; + } + } + + /* + * Enable 1.8V Signal Enable in the Host Control2 + * register + */ + ctrl |= SDHCI_CTRL_VDD_180; + sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); + + /* Wait for 5ms */ + usleep_range(5000, 5500); + + /* 1.8V regulator output should be stable within 5 ms */ + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + if (ctrl & SDHCI_CTRL_VDD_180) + return 0; + + pr_warning("%s: 1.8V regulator output did not became stable\n", mmc_hostname(host->mmc)); - sdhci_reset(host, SDHCI_RESET_CMD); - sdhci_reset(host, SDHCI_RESET_DATA); + return -EAGAIN; + case MMC_SIGNAL_VOLTAGE_120: + if (host->vqmmc) { + ret = regulator_set_voltage(host->vqmmc, 1100000, 1300000); + if (ret) { + pr_warning("%s: Switching to 1.2V signalling voltage " + " failed\n", mmc_hostname(host->mmc)); + return -EIO; + } + } + return 0; + default: + /* No signal voltage switch required */ + return 0; + } +} - host->mrq->cmd->error = -ENOMEDIUM; - tasklet_schedule(&host->finish_tasklet); +static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc, + struct mmc_ios *ios) +{ + struct sdhci_host *host = mmc_priv(mmc); + int err; + + if (host->version < SDHCI_SPEC_300) + return 0; + sdhci_runtime_pm_get(host); + err = sdhci_do_start_signal_voltage_switch(host, ios); + sdhci_runtime_pm_put(host); + return err; +} + +static int sdhci_card_busy(struct mmc_host *mmc) +{ + struct sdhci_host *host = mmc_priv(mmc); + u32 present_state; + + sdhci_runtime_pm_get(host); + /* Check whether DAT[3:0] is 0000 */ + present_state = sdhci_readl(host, SDHCI_PRESENT_STATE); + sdhci_runtime_pm_put(host); + + return !(present_state & SDHCI_DATA_LVL_MASK); +} + +static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) +{ + struct sdhci_host *host = mmc_priv(mmc); + u16 ctrl; + int tuning_loop_counter = MAX_TUNING_LOOP; + int err = 0; + unsigned long flags; + + sdhci_runtime_pm_get(host); + spin_lock_irqsave(&host->lock, flags); + + /* + * The Host Controller needs tuning only in case of SDR104 mode + * and for SDR50 mode when Use Tuning for SDR50 is set in the + * Capabilities register. + * If the Host Controller supports the HS200 mode then the + * tuning function has to be executed. + */ + switch (host->timing) { + case MMC_TIMING_MMC_HS200: + case MMC_TIMING_UHS_SDR104: + break; + + case MMC_TIMING_UHS_SDR50: + if (host->flags & SDHCI_SDR50_NEEDS_TUNING || + host->flags & SDHCI_SDR104_NEEDS_TUNING) + break; + /* FALLTHROUGH */ + + default: + spin_unlock_irqrestore(&host->lock, flags); + sdhci_runtime_pm_put(host); + return 0; + } + + if (host->ops->platform_execute_tuning) { + spin_unlock_irqrestore(&host->lock, flags); + err = host->ops->platform_execute_tuning(host, opcode); + sdhci_runtime_pm_put(host); + return err; + } + + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + ctrl |= SDHCI_CTRL_EXEC_TUNING; + sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); + + /* + * As per the Host Controller spec v3.00, tuning command + * generates Buffer Read Ready interrupt, so enable that. + * + * Note: The spec clearly says that when tuning sequence + * is being performed, the controller does not generate + * interrupts other than Buffer Read Ready interrupt. But + * to make sure we don't hit a controller bug, we _only_ + * enable Buffer Read Ready interrupt here. + */ + sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_INT_ENABLE); + sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_SIGNAL_ENABLE); + + /* + * Issue CMD19 repeatedly till Execute Tuning is set to 0 or the number + * of loops reaches 40 times or a timeout of 150ms occurs. + */ + do { + struct mmc_command cmd = {0}; + struct mmc_request mrq = {NULL}; + + cmd.opcode = opcode; + cmd.arg = 0; + cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; + cmd.retries = 0; + cmd.data = NULL; + cmd.error = 0; + + if (tuning_loop_counter-- == 0) + break; + + mrq.cmd = &cmd; + host->mrq = &mrq; + + /* + * In response to CMD19, the card sends 64 bytes of tuning + * block to the Host Controller. So we set the block size + * to 64 here. + */ + if (cmd.opcode == MMC_SEND_TUNING_BLOCK_HS200) { + if (mmc->ios.bus_width == MMC_BUS_WIDTH_8) + sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 128), + SDHCI_BLOCK_SIZE); + else if (mmc->ios.bus_width == MMC_BUS_WIDTH_4) + sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64), + SDHCI_BLOCK_SIZE); + } else { + sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64), + SDHCI_BLOCK_SIZE); } + + /* + * The tuning block is sent by the card to the host controller. + * So we set the TRNS_READ bit in the Transfer Mode register. + * This also takes care of setting DMA Enable and Multi Block + * Select in the same register to 0. + */ + sdhci_writew(host, SDHCI_TRNS_READ, SDHCI_TRANSFER_MODE); + + sdhci_send_command(host, &cmd); + + host->cmd = NULL; + host->mrq = NULL; + + spin_unlock_irqrestore(&host->lock, flags); + /* Wait for Buffer Read Ready interrupt */ + wait_event_interruptible_timeout(host->buf_ready_int, + (host->tuning_done == 1), + msecs_to_jiffies(50)); + spin_lock_irqsave(&host->lock, flags); + + if (!host->tuning_done) { + pr_info(DRIVER_NAME ": Timeout waiting for " + "Buffer Read Ready interrupt during tuning " + "procedure, falling back to fixed sampling " + "clock\n"); + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + ctrl &= ~SDHCI_CTRL_TUNED_CLK; + ctrl &= ~SDHCI_CTRL_EXEC_TUNING; + sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); + + err = -EIO; + goto out; + } + + host->tuning_done = 0; + + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + + /* eMMC spec does not require a delay between tuning cycles */ + if (opcode == MMC_SEND_TUNING_BLOCK) + mdelay(1); + } while (ctrl & SDHCI_CTRL_EXEC_TUNING); + + /* + * The Host Driver has exhausted the maximum number of loops allowed, + * so use fixed sampling frequency. + */ + if (tuning_loop_counter < 0) { + ctrl &= ~SDHCI_CTRL_TUNED_CLK; + sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); + } + if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) { + pr_info(DRIVER_NAME ": Tuning procedure" + " failed, falling back to fixed sampling" + " clock\n"); + err = -EIO; + } + +out: + /* + * If this is the very first time we are here, we start the retuning + * timer. Since only during the first time, SDHCI_NEEDS_RETUNING + * flag won't be set, we check this condition before actually starting + * the timer. + */ + if (!(host->flags & SDHCI_NEEDS_RETUNING) && host->tuning_count && + (host->tuning_mode == SDHCI_TUNING_MODE_1)) { + host->flags |= SDHCI_USING_RETUNING_TIMER; + mod_timer(&host->tuning_timer, jiffies + + host->tuning_count * HZ); + /* Tuning mode 1 limits the maximum data length to 4MB */ + mmc->max_blk_count = (4 * 1024 * 1024) / mmc->max_blk_size; + } else if (host->flags & SDHCI_USING_RETUNING_TIMER) { + host->flags &= ~SDHCI_NEEDS_RETUNING; + /* Reload the new initial value for timer */ + mod_timer(&host->tuning_timer, jiffies + + host->tuning_count * HZ); } + /* + * In case tuning fails, host controllers which support re-tuning can + * try tuning again at a later time, when the re-tuning timer expires. + * So for these controllers, we return 0. Since there might be other + * controllers who do not have this capability, we return error for + * them. SDHCI_USING_RETUNING_TIMER means the host is currently using + * a retuning timer to do the retuning for the card. + */ + if (err && (host->flags & SDHCI_USING_RETUNING_TIMER)) + err = 0; + + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); spin_unlock_irqrestore(&host->lock, flags); + sdhci_runtime_pm_put(host); + + return err; +} + + +static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable) +{ + /* Host Controller v3.00 defines preset value registers */ + if (host->version < SDHCI_SPEC_300) + return; + + /* + * We only enable or disable Preset Value if they are not already + * enabled or disabled respectively. Otherwise, we bail out. + */ + if (host->preset_enabled != enable) { + u16 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + + if (enable) + ctrl |= SDHCI_CTRL_PRESET_VAL_ENABLE; + else + ctrl &= ~SDHCI_CTRL_PRESET_VAL_ENABLE; + + sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); - mmc_detect_change(host->mmc, msecs_to_jiffies(200)); + if (enable) + host->flags |= SDHCI_PV_ENABLED; + else + host->flags &= ~SDHCI_PV_ENABLED; + + host->preset_enabled = enable; + } } +static void sdhci_card_event(struct mmc_host *mmc) +{ + struct sdhci_host *host = mmc_priv(mmc); + unsigned long flags; + + /* First check if client has provided their own card event */ + if (host->ops->card_event) + host->ops->card_event(host); + + spin_lock_irqsave(&host->lock, flags); + + /* Check host->mrq first in case we are runtime suspended */ + if (host->mrq && !sdhci_do_get_cd(host)) { + pr_err("%s: Card removed during transfer!\n", + mmc_hostname(host->mmc)); + pr_err("%s: Resetting controller.\n", + mmc_hostname(host->mmc)); + + sdhci_do_reset(host, SDHCI_RESET_CMD); + sdhci_do_reset(host, SDHCI_RESET_DATA); + + host->mrq->cmd->error = -ENOMEDIUM; + tasklet_schedule(&host->finish_tasklet); + } + + spin_unlock_irqrestore(&host->lock, flags); +} + +static const struct mmc_host_ops sdhci_ops = { + .request = sdhci_request, + .set_ios = sdhci_set_ios, + .get_cd = sdhci_get_cd, + .get_ro = sdhci_get_ro, + .hw_reset = sdhci_hw_reset, + .enable_sdio_irq = sdhci_enable_sdio_irq, + .start_signal_voltage_switch = sdhci_start_signal_voltage_switch, + .execute_tuning = sdhci_execute_tuning, + .card_event = sdhci_card_event, + .card_busy = sdhci_card_busy, +}; + +/*****************************************************************************\ + * * + * Tasklets * + * * +\*****************************************************************************/ + static void sdhci_tasklet_finish(unsigned long param) { struct sdhci_host *host; @@ -1318,6 +2100,15 @@ static void sdhci_tasklet_finish(unsigned long param) spin_lock_irqsave(&host->lock, flags); + /* + * If this tasklet gets rescheduled while running, it will + * be run again afterwards but without any active request. + */ + if (!host->mrq) { + spin_unlock_irqrestore(&host->lock, flags); + return; + } + del_timer(&host->timer); mrq = host->mrq; @@ -1327,25 +2118,20 @@ static void sdhci_tasklet_finish(unsigned long param) * upon error conditions. */ if (!(host->flags & SDHCI_DEVICE_DEAD) && - (mrq->cmd->error || + ((mrq->cmd && mrq->cmd->error) || (mrq->data && (mrq->data->error || (mrq->data->stop && mrq->data->stop->error))) || (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) { /* Some controllers need this kick or reset won't work here */ - if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) { - unsigned int clock; - + if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) /* This is to force an update */ - clock = host->clock; - host->clock = 0; - sdhci_set_clock(host, clock); - } + host->ops->set_clock(host, host->clock); /* Spec says we should do both at the same time, but Ricoh controllers do not like that. */ - sdhci_reset(host, SDHCI_RESET_CMD); - sdhci_reset(host, SDHCI_RESET_DATA); + sdhci_do_reset(host, SDHCI_RESET_CMD); + sdhci_do_reset(host, SDHCI_RESET_DATA); } host->mrq = NULL; @@ -1360,6 +2146,7 @@ static void sdhci_tasklet_finish(unsigned long param) spin_unlock_irqrestore(&host->lock, flags); mmc_request_done(host->mmc, mrq); + sdhci_runtime_pm_put(host); } static void sdhci_timeout_timer(unsigned long data) @@ -1372,7 +2159,7 @@ static void sdhci_timeout_timer(unsigned long data) spin_lock_irqsave(&host->lock, flags); if (host->mrq) { - printk(KERN_ERR "%s: Timeout waiting for hardware " + pr_err("%s: Timeout waiting for hardware " "interrupt.\n", mmc_hostname(host->mmc)); sdhci_dumpregs(host); @@ -1393,6 +2180,20 @@ static void sdhci_timeout_timer(unsigned long data) spin_unlock_irqrestore(&host->lock, flags); } +static void sdhci_tuning_timer(unsigned long data) +{ + struct sdhci_host *host; + unsigned long flags; + + host = (struct sdhci_host *)data; + + spin_lock_irqsave(&host->lock, flags); + + host->flags |= SDHCI_NEEDS_RETUNING; + + spin_unlock_irqrestore(&host->lock, flags); +} + /*****************************************************************************\ * * * Interrupt handling * @@ -1404,7 +2205,7 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask) BUG_ON(intmask == 0); if (!host->cmd) { - printk(KERN_ERR "%s: Got command interrupt 0x%08x even " + pr_err("%s: Got command interrupt 0x%08x even " "though no command operation was in progress.\n", mmc_hostname(host->mmc), (unsigned)intmask); sdhci_dumpregs(host); @@ -1479,8 +2280,20 @@ static void sdhci_show_adma_error(struct sdhci_host *host) { } static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) { + u32 command; BUG_ON(intmask == 0); + /* CMD19 generates _only_ Buffer Read Ready interrupt */ + if (intmask & SDHCI_INT_DATA_AVAIL) { + command = SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND)); + if (command == MMC_SEND_TUNING_BLOCK || + command == MMC_SEND_TUNING_BLOCK_HS200) { + host->tuning_done = 1; + wake_up(&host->buf_ready_int); + return; + } + } + if (!host->data) { /* * The "data complete" interrupt is also used to @@ -1494,7 +2307,7 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) } } - printk(KERN_ERR "%s: Got data interrupt 0x%08x even " + pr_err("%s: Got data interrupt 0x%08x even " "though no data operation was in progress.\n", mmc_hostname(host->mmc), (unsigned)intmask); sdhci_dumpregs(host); @@ -1504,12 +2317,18 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) if (intmask & SDHCI_INT_DATA_TIMEOUT) host->data->error = -ETIMEDOUT; - else if (intmask & (SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_END_BIT)) + else if (intmask & SDHCI_INT_DATA_END_BIT) + host->data->error = -EILSEQ; + else if ((intmask & SDHCI_INT_DATA_CRC) && + SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND)) + != MMC_BUS_TEST_R) host->data->error = -EILSEQ; else if (intmask & SDHCI_INT_ADMA_ERROR) { - printk(KERN_ERR "%s: ADMA error\n", mmc_hostname(host->mmc)); + pr_err("%s: ADMA error\n", mmc_hostname(host->mmc)); sdhci_show_adma_error(host); host->data->error = -EIO; + if (host->ops->adma_workaround) + host->ops->adma_workaround(host, intmask); } if (host->data->error) @@ -1522,10 +2341,28 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) * We currently don't do anything fancy with DMA * boundaries, but as we can't disable the feature * we need to at least restart the transfer. + * + * According to the spec sdhci_readl(host, SDHCI_DMA_ADDRESS) + * should return a valid address to continue from, but as + * some controllers are faulty, don't trust them. */ - if (intmask & SDHCI_INT_DMA_END) - sdhci_writel(host, sdhci_readl(host, SDHCI_DMA_ADDRESS), - SDHCI_DMA_ADDRESS); + if (intmask & SDHCI_INT_DMA_END) { + u32 dmastart, dmanow; + dmastart = sg_dma_address(host->data->sg); + dmanow = dmastart + host->data->bytes_xfered; + /* + * Force update to the next DMA block boundary. + */ + dmanow = (dmanow & + ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) + + SDHCI_DEFAULT_BOUNDARY_SIZE; + host->data->bytes_xfered = dmanow - dmastart; + DBG("%s: DMA base 0x%08x, transferred 0x%06x bytes," + " next 0x%08x\n", + mmc_hostname(host->mmc), dmastart, + host->data->bytes_xfered, dmanow); + sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS); + } if (intmask & SDHCI_INT_DATA_END) { if (host->cmd) { @@ -1544,81 +2381,132 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) static irqreturn_t sdhci_irq(int irq, void *dev_id) { - irqreturn_t result; - struct sdhci_host* host = dev_id; - u32 intmask; - int cardint = 0; + irqreturn_t result = IRQ_NONE; + struct sdhci_host *host = dev_id; + u32 intmask, mask, unexpected = 0; + int max_loops = 16; spin_lock(&host->lock); - intmask = sdhci_readl(host, SDHCI_INT_STATUS); + if (host->runtime_suspended && !sdhci_sdio_irq_enabled(host)) { + spin_unlock(&host->lock); + return IRQ_NONE; + } + intmask = sdhci_readl(host, SDHCI_INT_STATUS); if (!intmask || intmask == 0xffffffff) { result = IRQ_NONE; goto out; } - DBG("*** %s got interrupt: 0x%08x\n", - mmc_hostname(host->mmc), intmask); + do { + /* Clear selected interrupts. */ + mask = intmask & (SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK | + SDHCI_INT_BUS_POWER); + sdhci_writel(host, mask, SDHCI_INT_STATUS); - if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) { - sdhci_writel(host, intmask & (SDHCI_INT_CARD_INSERT | - SDHCI_INT_CARD_REMOVE), SDHCI_INT_STATUS); - tasklet_schedule(&host->card_tasklet); - } + DBG("*** %s got interrupt: 0x%08x\n", + mmc_hostname(host->mmc), intmask); - intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE); + if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) { + u32 present = sdhci_readl(host, SDHCI_PRESENT_STATE) & + SDHCI_CARD_PRESENT; - if (intmask & SDHCI_INT_CMD_MASK) { - sdhci_writel(host, intmask & SDHCI_INT_CMD_MASK, - SDHCI_INT_STATUS); - sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK); - } + /* + * There is a observation on i.mx esdhc. INSERT + * bit will be immediately set again when it gets + * cleared, if a card is inserted. We have to mask + * the irq to prevent interrupt storm which will + * freeze the system. And the REMOVE gets the + * same situation. + * + * More testing are needed here to ensure it works + * for other platforms though. + */ + host->ier &= ~(SDHCI_INT_CARD_INSERT | + SDHCI_INT_CARD_REMOVE); + host->ier |= present ? SDHCI_INT_CARD_REMOVE : + SDHCI_INT_CARD_INSERT; + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); + + sdhci_writel(host, intmask & (SDHCI_INT_CARD_INSERT | + SDHCI_INT_CARD_REMOVE), SDHCI_INT_STATUS); + + host->thread_isr |= intmask & (SDHCI_INT_CARD_INSERT | + SDHCI_INT_CARD_REMOVE); + result = IRQ_WAKE_THREAD; + } - if (intmask & SDHCI_INT_DATA_MASK) { - sdhci_writel(host, intmask & SDHCI_INT_DATA_MASK, - SDHCI_INT_STATUS); - sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK); - } + if (intmask & SDHCI_INT_CMD_MASK) + sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK); - intmask &= ~(SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK); + if (intmask & SDHCI_INT_DATA_MASK) + sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK); - intmask &= ~SDHCI_INT_ERROR; + if (intmask & SDHCI_INT_BUS_POWER) + pr_err("%s: Card is consuming too much power!\n", + mmc_hostname(host->mmc)); - if (intmask & SDHCI_INT_BUS_POWER) { - printk(KERN_ERR "%s: Card is consuming too much power!\n", - mmc_hostname(host->mmc)); - sdhci_writel(host, SDHCI_INT_BUS_POWER, SDHCI_INT_STATUS); - } + if (intmask & SDHCI_INT_CARD_INT) { + sdhci_enable_sdio_irq_nolock(host, false); + host->thread_isr |= SDHCI_INT_CARD_INT; + result = IRQ_WAKE_THREAD; + } - intmask &= ~SDHCI_INT_BUS_POWER; + intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE | + SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK | + SDHCI_INT_ERROR | SDHCI_INT_BUS_POWER | + SDHCI_INT_CARD_INT); - if (intmask & SDHCI_INT_CARD_INT) - cardint = 1; + if (intmask) { + unexpected |= intmask; + sdhci_writel(host, intmask, SDHCI_INT_STATUS); + } - intmask &= ~SDHCI_INT_CARD_INT; + if (result == IRQ_NONE) + result = IRQ_HANDLED; - if (intmask) { - printk(KERN_ERR "%s: Unexpected interrupt 0x%08x.\n", - mmc_hostname(host->mmc), intmask); - sdhci_dumpregs(host); + intmask = sdhci_readl(host, SDHCI_INT_STATUS); + } while (intmask && --max_loops); +out: + spin_unlock(&host->lock); - sdhci_writel(host, intmask, SDHCI_INT_STATUS); + if (unexpected) { + pr_err("%s: Unexpected interrupt 0x%08x.\n", + mmc_hostname(host->mmc), unexpected); + sdhci_dumpregs(host); } - result = IRQ_HANDLED; + return result; +} - mmiowb(); -out: - spin_unlock(&host->lock); +static irqreturn_t sdhci_thread_irq(int irq, void *dev_id) +{ + struct sdhci_host *host = dev_id; + unsigned long flags; + u32 isr; - /* - * We have to delay this as it calls back into the driver. - */ - if (cardint) - mmc_signal_sdio_irq(host->mmc); + spin_lock_irqsave(&host->lock, flags); + isr = host->thread_isr; + host->thread_isr = 0; + spin_unlock_irqrestore(&host->lock, flags); - return result; + if (isr & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) { + sdhci_card_event(host->mmc); + mmc_detect_change(host->mmc, msecs_to_jiffies(200)); + } + + if (isr & SDHCI_INT_CARD_INT) { + sdio_run_irqs(host->mmc); + + spin_lock_irqsave(&host->lock, flags); + if (host->flags & SDHCI_SDIO_IRQ_ENABLED) + sdhci_enable_sdio_irq_nolock(host, true); + spin_unlock_irqrestore(&host->lock, flags); + } + + return isr ? IRQ_HANDLED : IRQ_NONE; } /*****************************************************************************\ @@ -1628,60 +2516,204 @@ out: \*****************************************************************************/ #ifdef CONFIG_PM - -int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state) +void sdhci_enable_irq_wakeups(struct sdhci_host *host) { - int ret; + u8 val; + u8 mask = SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE + | SDHCI_WAKE_ON_INT; - sdhci_disable_card_detection(host); + val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL); + val |= mask ; + /* Avoid fake wake up */ + if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) + val &= ~(SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE); + sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL); +} +EXPORT_SYMBOL_GPL(sdhci_enable_irq_wakeups); - ret = mmc_suspend_host(host->mmc); - if (ret) - return ret; +void sdhci_disable_irq_wakeups(struct sdhci_host *host) +{ + u8 val; + u8 mask = SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE + | SDHCI_WAKE_ON_INT; - free_irq(host->irq, host); + val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL); + val &= ~mask; + sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL); +} +EXPORT_SYMBOL_GPL(sdhci_disable_irq_wakeups); - if (host->vmmc) - ret = regulator_disable(host->vmmc); +int sdhci_suspend_host(struct sdhci_host *host) +{ + sdhci_disable_card_detection(host); - return ret; + /* Disable tuning since we are suspending */ + if (host->flags & SDHCI_USING_RETUNING_TIMER) { + del_timer_sync(&host->tuning_timer); + host->flags &= ~SDHCI_NEEDS_RETUNING; + } + + if (!device_may_wakeup(mmc_dev(host->mmc))) { + host->ier = 0; + sdhci_writel(host, 0, SDHCI_INT_ENABLE); + sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE); + free_irq(host->irq, host); + } else { + sdhci_enable_irq_wakeups(host); + enable_irq_wake(host->irq); + } + return 0; } EXPORT_SYMBOL_GPL(sdhci_suspend_host); int sdhci_resume_host(struct sdhci_host *host) { - int ret; + int ret = 0; - if (host->vmmc) { - int ret = regulator_enable(host->vmmc); + if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) { + if (host->ops->enable_dma) + host->ops->enable_dma(host); + } + + if (!device_may_wakeup(mmc_dev(host->mmc))) { + ret = request_threaded_irq(host->irq, sdhci_irq, + sdhci_thread_irq, IRQF_SHARED, + mmc_hostname(host->mmc), host); if (ret) return ret; + } else { + sdhci_disable_irq_wakeups(host); + disable_irq_wake(host->irq); } + if ((host->mmc->pm_flags & MMC_PM_KEEP_POWER) && + (host->quirks2 & SDHCI_QUIRK2_HOST_OFF_CARD_ON)) { + /* Card keeps power but host controller does not */ + sdhci_init(host, 0); + host->pwr = 0; + host->clock = 0; + sdhci_do_set_ios(host, &host->mmc->ios); + } else { + sdhci_init(host, (host->mmc->pm_flags & MMC_PM_KEEP_POWER)); + mmiowb(); + } - if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) { + sdhci_enable_card_detection(host); + + /* Set the re-tuning expiration flag */ + if (host->flags & SDHCI_USING_RETUNING_TIMER) + host->flags |= SDHCI_NEEDS_RETUNING; + + return ret; +} + +EXPORT_SYMBOL_GPL(sdhci_resume_host); +#endif /* CONFIG_PM */ + +#ifdef CONFIG_PM_RUNTIME + +static int sdhci_runtime_pm_get(struct sdhci_host *host) +{ + return pm_runtime_get_sync(host->mmc->parent); +} + +static int sdhci_runtime_pm_put(struct sdhci_host *host) +{ + pm_runtime_mark_last_busy(host->mmc->parent); + return pm_runtime_put_autosuspend(host->mmc->parent); +} + +static void sdhci_runtime_pm_bus_on(struct sdhci_host *host) +{ + if (host->runtime_suspended || host->bus_on) + return; + host->bus_on = true; + pm_runtime_get_noresume(host->mmc->parent); +} + +static void sdhci_runtime_pm_bus_off(struct sdhci_host *host) +{ + if (host->runtime_suspended || !host->bus_on) + return; + host->bus_on = false; + pm_runtime_put_noidle(host->mmc->parent); +} + +int sdhci_runtime_suspend_host(struct sdhci_host *host) +{ + unsigned long flags; + int ret = 0; + + /* Disable tuning since we are suspending */ + if (host->flags & SDHCI_USING_RETUNING_TIMER) { + del_timer_sync(&host->tuning_timer); + host->flags &= ~SDHCI_NEEDS_RETUNING; + } + + spin_lock_irqsave(&host->lock, flags); + host->ier &= SDHCI_INT_CARD_INT; + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); + spin_unlock_irqrestore(&host->lock, flags); + + synchronize_hardirq(host->irq); + + spin_lock_irqsave(&host->lock, flags); + host->runtime_suspended = true; + spin_unlock_irqrestore(&host->lock, flags); + + return ret; +} +EXPORT_SYMBOL_GPL(sdhci_runtime_suspend_host); + +int sdhci_runtime_resume_host(struct sdhci_host *host) +{ + unsigned long flags; + int ret = 0, host_flags = host->flags; + + if (host_flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) { if (host->ops->enable_dma) host->ops->enable_dma(host); } - ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED, - mmc_hostname(host->mmc), host); - if (ret) - return ret; + sdhci_init(host, 0); - sdhci_init(host, (host->mmc->pm_flags & MMC_PM_KEEP_POWER)); - mmiowb(); + /* Force clock and power re-program */ + host->pwr = 0; + host->clock = 0; + sdhci_do_set_ios(host, &host->mmc->ios); + + sdhci_do_start_signal_voltage_switch(host, &host->mmc->ios); + if ((host_flags & SDHCI_PV_ENABLED) && + !(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN)) { + spin_lock_irqsave(&host->lock, flags); + sdhci_enable_preset_value(host, true); + spin_unlock_irqrestore(&host->lock, flags); + } + + /* Set the re-tuning expiration flag */ + if (host->flags & SDHCI_USING_RETUNING_TIMER) + host->flags |= SDHCI_NEEDS_RETUNING; + + spin_lock_irqsave(&host->lock, flags); + + host->runtime_suspended = false; + + /* Enable SDIO IRQ */ + if (host->flags & SDHCI_SDIO_IRQ_ENABLED) + sdhci_enable_sdio_irq_nolock(host, true); - ret = mmc_resume_host(host->mmc); + /* Enable Card Detection */ sdhci_enable_card_detection(host); + spin_unlock_irqrestore(&host->lock, flags); + return ret; } +EXPORT_SYMBOL_GPL(sdhci_runtime_resume_host); -EXPORT_SYMBOL_GPL(sdhci_resume_host); - -#endif /* CONFIG_PM */ +#endif /*****************************************************************************\ * * @@ -1712,7 +2744,9 @@ EXPORT_SYMBOL_GPL(sdhci_alloc_host); int sdhci_add_host(struct sdhci_host *host) { struct mmc_host *mmc; - unsigned int caps; + u32 caps[2] = {0, 0}; + u32 max_current_caps; + unsigned int ocr_avail; int ret; WARN_ON(host == NULL); @@ -1723,24 +2757,31 @@ int sdhci_add_host(struct sdhci_host *host) if (debug_quirks) host->quirks = debug_quirks; + if (debug_quirks2) + host->quirks2 = debug_quirks2; - sdhci_reset(host, SDHCI_RESET_ALL); + sdhci_do_reset(host, SDHCI_RESET_ALL); host->version = sdhci_readw(host, SDHCI_HOST_VERSION); host->version = (host->version & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT; if (host->version > SDHCI_SPEC_300) { - printk(KERN_ERR "%s: Unknown controller version (%d). " + pr_err("%s: Unknown controller version (%d). " "You may experience problems.\n", mmc_hostname(mmc), host->version); } - caps = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? host->caps : + caps[0] = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? host->caps : sdhci_readl(host, SDHCI_CAPABILITIES); + if (host->version >= SDHCI_SPEC_300) + caps[1] = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? + host->caps1 : + sdhci_readl(host, SDHCI_CAPABILITIES_1); + if (host->quirks & SDHCI_QUIRK_FORCE_DMA) host->flags |= SDHCI_USE_SDMA; - else if (!(caps & SDHCI_CAN_DO_SDMA)) + else if (!(caps[0] & SDHCI_CAN_DO_SDMA)) DBG("Controller doesn't have SDMA capability\n"); else host->flags |= SDHCI_USE_SDMA; @@ -1751,7 +2792,8 @@ int sdhci_add_host(struct sdhci_host *host) host->flags &= ~SDHCI_USE_SDMA; } - if ((host->version >= SDHCI_SPEC_200) && (caps & SDHCI_CAN_DO_ADMA2)) + if ((host->version >= SDHCI_SPEC_200) && + (caps[0] & SDHCI_CAN_DO_ADMA2)) host->flags |= SDHCI_USE_ADMA; if ((host->quirks & SDHCI_QUIRK_BROKEN_ADMA) && @@ -1763,7 +2805,7 @@ int sdhci_add_host(struct sdhci_host *host) if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) { if (host->ops->enable_dma) { if (host->ops->enable_dma(host)) { - printk(KERN_WARNING "%s: No suitable DMA " + pr_warning("%s: No suitable DMA " "available. Falling back to PIO.\n", mmc_hostname(mmc)); host->flags &= @@ -1778,15 +2820,29 @@ int sdhci_add_host(struct sdhci_host *host) * (128) and potentially one alignment transfer for * each of those entries. */ - host->adma_desc = kmalloc((128 * 2 + 1) * 4, GFP_KERNEL); + host->adma_desc = dma_alloc_coherent(mmc_dev(host->mmc), + ADMA_SIZE, &host->adma_addr, + GFP_KERNEL); host->align_buffer = kmalloc(128 * 4, GFP_KERNEL); if (!host->adma_desc || !host->align_buffer) { - kfree(host->adma_desc); + dma_free_coherent(mmc_dev(host->mmc), ADMA_SIZE, + host->adma_desc, host->adma_addr); kfree(host->align_buffer); - printk(KERN_WARNING "%s: Unable to allocate ADMA " + pr_warning("%s: Unable to allocate ADMA " "buffers. Falling back to standard DMA.\n", mmc_hostname(mmc)); host->flags &= ~SDHCI_USE_ADMA; + host->adma_desc = NULL; + host->align_buffer = NULL; + } else if (host->adma_addr & 3) { + pr_warning("%s: unable to allocate aligned ADMA descriptor\n", + mmc_hostname(mmc)); + host->flags &= ~SDHCI_USE_ADMA; + dma_free_coherent(mmc_dev(host->mmc), ADMA_SIZE, + host->adma_desc, host->adma_addr); + kfree(host->align_buffer); + host->adma_desc = NULL; + host->align_buffer = NULL; } } @@ -1801,73 +2857,285 @@ int sdhci_add_host(struct sdhci_host *host) } if (host->version >= SDHCI_SPEC_300) - host->max_clk = (caps & SDHCI_CLOCK_V3_BASE_MASK) + host->max_clk = (caps[0] & SDHCI_CLOCK_V3_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT; else - host->max_clk = (caps & SDHCI_CLOCK_BASE_MASK) + host->max_clk = (caps[0] & SDHCI_CLOCK_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT; host->max_clk *= 1000000; if (host->max_clk == 0 || host->quirks & SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN) { if (!host->ops->get_max_clock) { - printk(KERN_ERR - "%s: Hardware doesn't specify base clock " + pr_err("%s: Hardware doesn't specify base clock " "frequency.\n", mmc_hostname(mmc)); return -ENODEV; } host->max_clk = host->ops->get_max_clock(host); } + /* + * In case of Host Controller v3.00, find out whether clock + * multiplier is supported. + */ + host->clk_mul = (caps[1] & SDHCI_CLOCK_MUL_MASK) >> + SDHCI_CLOCK_MUL_SHIFT; + + /* + * In case the value in Clock Multiplier is 0, then programmable + * clock mode is not supported, otherwise the actual clock + * multiplier is one more than the value of Clock Multiplier + * in the Capabilities Register. + */ + if (host->clk_mul) + host->clk_mul += 1; + + /* + * Set host parameters. + */ + mmc->ops = &sdhci_ops; + mmc->f_max = host->max_clk; + if (host->ops->get_min_clock) + mmc->f_min = host->ops->get_min_clock(host); + else if (host->version >= SDHCI_SPEC_300) { + if (host->clk_mul) { + mmc->f_min = (host->max_clk * host->clk_mul) / 1024; + mmc->f_max = host->max_clk * host->clk_mul; + } else + mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300; + } else + mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200; + host->timeout_clk = - (caps & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT; + (caps[0] & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT; if (host->timeout_clk == 0) { if (host->ops->get_timeout_clock) { host->timeout_clk = host->ops->get_timeout_clock(host); } else if (!(host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) { - printk(KERN_ERR - "%s: Hardware doesn't specify timeout clock " + pr_err("%s: Hardware doesn't specify timeout clock " "frequency.\n", mmc_hostname(mmc)); return -ENODEV; } } - if (caps & SDHCI_TIMEOUT_CLK_UNIT) + if (caps[0] & SDHCI_TIMEOUT_CLK_UNIT) host->timeout_clk *= 1000; + if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK) + host->timeout_clk = mmc->f_max / 1000; + + mmc->max_busy_timeout = (1 << 27) / host->timeout_clk; + + mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE | MMC_CAP_CMD23; + mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD; + + if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12) + host->flags |= SDHCI_AUTO_CMD12; + + /* Auto-CMD23 stuff only works in ADMA or PIO. */ + if ((host->version >= SDHCI_SPEC_300) && + ((host->flags & SDHCI_USE_ADMA) || + !(host->flags & SDHCI_USE_SDMA))) { + host->flags |= SDHCI_AUTO_CMD23; + DBG("%s: Auto-CMD23 available\n", mmc_hostname(mmc)); + } else { + DBG("%s: Auto-CMD23 unavailable\n", mmc_hostname(mmc)); + } + /* - * Set host parameters. + * A controller may support 8-bit width, but the board itself + * might not have the pins brought out. Boards that support + * 8-bit width must set "mmc->caps |= MMC_CAP_8_BIT_DATA;" in + * their platform code before calling sdhci_add_host(), and we + * won't assume 8-bit width for hosts without that CAP. */ - mmc->ops = &sdhci_ops; - if (host->ops->get_min_clock) - mmc->f_min = host->ops->get_min_clock(host); - else if (host->version >= SDHCI_SPEC_300) - mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300; - else - mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200; - mmc->f_max = host->max_clk; - mmc->caps |= MMC_CAP_SDIO_IRQ; - if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA)) - mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA; + mmc->caps |= MMC_CAP_4_BIT_DATA; - if (caps & SDHCI_CAN_DO_HISPD) + if (host->quirks2 & SDHCI_QUIRK2_HOST_NO_CMD23) + mmc->caps &= ~MMC_CAP_CMD23; + + if (caps[0] & SDHCI_CAN_DO_HISPD) mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED; if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) && - mmc_card_is_removable(mmc)) + !(host->mmc->caps & MMC_CAP_NONREMOVABLE)) mmc->caps |= MMC_CAP_NEEDS_POLL; - mmc->ocr_avail = 0; - if (caps & SDHCI_CAN_VDD_330) - mmc->ocr_avail |= MMC_VDD_32_33|MMC_VDD_33_34; - if (caps & SDHCI_CAN_VDD_300) - mmc->ocr_avail |= MMC_VDD_29_30|MMC_VDD_30_31; - if (caps & SDHCI_CAN_VDD_180) - mmc->ocr_avail |= MMC_VDD_165_195; + /* If vqmmc regulator and no 1.8V signalling, then there's no UHS */ + host->vqmmc = regulator_get_optional(mmc_dev(mmc), "vqmmc"); + if (IS_ERR_OR_NULL(host->vqmmc)) { + if (PTR_ERR(host->vqmmc) < 0) { + pr_info("%s: no vqmmc regulator found\n", + mmc_hostname(mmc)); + host->vqmmc = NULL; + } + } else { + ret = regulator_enable(host->vqmmc); + if (!regulator_is_supported_voltage(host->vqmmc, 1700000, + 1950000)) + caps[1] &= ~(SDHCI_SUPPORT_SDR104 | + SDHCI_SUPPORT_SDR50 | + SDHCI_SUPPORT_DDR50); + if (ret) { + pr_warn("%s: Failed to enable vqmmc regulator: %d\n", + mmc_hostname(mmc), ret); + host->vqmmc = NULL; + } + } + + if (host->quirks2 & SDHCI_QUIRK2_NO_1_8_V) + caps[1] &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 | + SDHCI_SUPPORT_DDR50); + + /* Any UHS-I mode in caps implies SDR12 and SDR25 support. */ + if (caps[1] & (SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 | + SDHCI_SUPPORT_DDR50)) + mmc->caps |= MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25; + + /* SDR104 supports also implies SDR50 support */ + if (caps[1] & SDHCI_SUPPORT_SDR104) { + mmc->caps |= MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_SDR50; + /* SD3.0: SDR104 is supported so (for eMMC) the caps2 + * field can be promoted to support HS200. + */ + if (!(host->quirks2 & SDHCI_QUIRK2_BROKEN_HS200)) + mmc->caps2 |= MMC_CAP2_HS200; + } else if (caps[1] & SDHCI_SUPPORT_SDR50) + mmc->caps |= MMC_CAP_UHS_SDR50; + + if ((caps[1] & SDHCI_SUPPORT_DDR50) && + !(host->quirks2 & SDHCI_QUIRK2_BROKEN_DDR50)) + mmc->caps |= MMC_CAP_UHS_DDR50; + + /* Does the host need tuning for SDR50? */ + if (caps[1] & SDHCI_USE_SDR50_TUNING) + host->flags |= SDHCI_SDR50_NEEDS_TUNING; + + /* Does the host need tuning for SDR104 / HS200? */ + if (mmc->caps2 & MMC_CAP2_HS200) + host->flags |= SDHCI_SDR104_NEEDS_TUNING; + + /* Driver Type(s) (A, C, D) supported by the host */ + if (caps[1] & SDHCI_DRIVER_TYPE_A) + mmc->caps |= MMC_CAP_DRIVER_TYPE_A; + if (caps[1] & SDHCI_DRIVER_TYPE_C) + mmc->caps |= MMC_CAP_DRIVER_TYPE_C; + if (caps[1] & SDHCI_DRIVER_TYPE_D) + mmc->caps |= MMC_CAP_DRIVER_TYPE_D; + + /* Initial value for re-tuning timer count */ + host->tuning_count = (caps[1] & SDHCI_RETUNING_TIMER_COUNT_MASK) >> + SDHCI_RETUNING_TIMER_COUNT_SHIFT; + + /* + * In case Re-tuning Timer is not disabled, the actual value of + * re-tuning timer will be 2 ^ (n - 1). + */ + if (host->tuning_count) + host->tuning_count = 1 << (host->tuning_count - 1); + + /* Re-tuning mode supported by the Host Controller */ + host->tuning_mode = (caps[1] & SDHCI_RETUNING_MODE_MASK) >> + SDHCI_RETUNING_MODE_SHIFT; + + ocr_avail = 0; + + host->vmmc = regulator_get_optional(mmc_dev(mmc), "vmmc"); + if (IS_ERR_OR_NULL(host->vmmc)) { + if (PTR_ERR(host->vmmc) < 0) { + pr_info("%s: no vmmc regulator found\n", + mmc_hostname(mmc)); + host->vmmc = NULL; + } + } + +#ifdef CONFIG_REGULATOR + /* + * Voltage range check makes sense only if regulator reports + * any voltage value. + */ + if (host->vmmc && regulator_get_voltage(host->vmmc) > 0) { + ret = regulator_is_supported_voltage(host->vmmc, 2700000, + 3600000); + if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_330))) + caps[0] &= ~SDHCI_CAN_VDD_330; + if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_300))) + caps[0] &= ~SDHCI_CAN_VDD_300; + ret = regulator_is_supported_voltage(host->vmmc, 1700000, + 1950000); + if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_180))) + caps[0] &= ~SDHCI_CAN_VDD_180; + } +#endif /* CONFIG_REGULATOR */ + + /* + * According to SD Host Controller spec v3.00, if the Host System + * can afford more than 150mA, Host Driver should set XPC to 1. Also + * the value is meaningful only if Voltage Support in the Capabilities + * register is set. The actual current value is 4 times the register + * value. + */ + max_current_caps = sdhci_readl(host, SDHCI_MAX_CURRENT); + if (!max_current_caps && host->vmmc) { + u32 curr = regulator_get_current_limit(host->vmmc); + if (curr > 0) { + + /* convert to SDHCI_MAX_CURRENT format */ + curr = curr/1000; /* convert to mA */ + curr = curr/SDHCI_MAX_CURRENT_MULTIPLIER; + + curr = min_t(u32, curr, SDHCI_MAX_CURRENT_LIMIT); + max_current_caps = + (curr << SDHCI_MAX_CURRENT_330_SHIFT) | + (curr << SDHCI_MAX_CURRENT_300_SHIFT) | + (curr << SDHCI_MAX_CURRENT_180_SHIFT); + } + } + + if (caps[0] & SDHCI_CAN_VDD_330) { + ocr_avail |= MMC_VDD_32_33 | MMC_VDD_33_34; + + mmc->max_current_330 = ((max_current_caps & + SDHCI_MAX_CURRENT_330_MASK) >> + SDHCI_MAX_CURRENT_330_SHIFT) * + SDHCI_MAX_CURRENT_MULTIPLIER; + } + if (caps[0] & SDHCI_CAN_VDD_300) { + ocr_avail |= MMC_VDD_29_30 | MMC_VDD_30_31; + + mmc->max_current_300 = ((max_current_caps & + SDHCI_MAX_CURRENT_300_MASK) >> + SDHCI_MAX_CURRENT_300_SHIFT) * + SDHCI_MAX_CURRENT_MULTIPLIER; + } + if (caps[0] & SDHCI_CAN_VDD_180) { + ocr_avail |= MMC_VDD_165_195; + + mmc->max_current_180 = ((max_current_caps & + SDHCI_MAX_CURRENT_180_MASK) >> + SDHCI_MAX_CURRENT_180_SHIFT) * + SDHCI_MAX_CURRENT_MULTIPLIER; + } + + if (host->ocr_mask) + ocr_avail = host->ocr_mask; + + mmc->ocr_avail = ocr_avail; + mmc->ocr_avail_sdio = ocr_avail; + if (host->ocr_avail_sdio) + mmc->ocr_avail_sdio &= host->ocr_avail_sdio; + mmc->ocr_avail_sd = ocr_avail; + if (host->ocr_avail_sd) + mmc->ocr_avail_sd &= host->ocr_avail_sd; + else /* normal SD controllers don't support 1.8V */ + mmc->ocr_avail_sd &= ~MMC_VDD_165_195; + mmc->ocr_avail_mmc = ocr_avail; + if (host->ocr_avail_mmc) + mmc->ocr_avail_mmc &= host->ocr_avail_mmc; if (mmc->ocr_avail == 0) { - printk(KERN_ERR "%s: Hardware doesn't report any " + pr_err("%s: Hardware doesn't report any " "support voltages.\n", mmc_hostname(mmc)); return -ENODEV; } @@ -1896,10 +3164,14 @@ int sdhci_add_host(struct sdhci_host *host) * of bytes. When doing hardware scatter/gather, each entry cannot * be larger than 64 KiB though. */ - if (host->flags & SDHCI_USE_ADMA) - mmc->max_seg_size = 65536; - else + if (host->flags & SDHCI_USE_ADMA) { + if (host->quirks & SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC) + mmc->max_seg_size = 65535; + else + mmc->max_seg_size = 65536; + } else { mmc->max_seg_size = mmc->max_req_size; + } /* * Maximum block size. This varies from controller to controller and @@ -1908,10 +3180,10 @@ int sdhci_add_host(struct sdhci_host *host) if (host->quirks & SDHCI_QUIRK_FORCE_BLK_SZ_2048) { mmc->max_blk_size = 2; } else { - mmc->max_blk_size = (caps & SDHCI_MAX_BLOCK_MASK) >> + mmc->max_blk_size = (caps[0] & SDHCI_MAX_BLOCK_MASK) >> SDHCI_MAX_BLOCK_SHIFT; if (mmc->max_blk_size >= 3) { - printk(KERN_WARNING "%s: Invalid maximum block size, " + pr_warning("%s: Invalid maximum block size, " "assuming 512 bytes\n", mmc_hostname(mmc)); mmc->max_blk_size = 0; } @@ -1927,28 +3199,30 @@ int sdhci_add_host(struct sdhci_host *host) /* * Init tasklets. */ - tasklet_init(&host->card_tasklet, - sdhci_tasklet_card, (unsigned long)host); tasklet_init(&host->finish_tasklet, sdhci_tasklet_finish, (unsigned long)host); setup_timer(&host->timer, sdhci_timeout_timer, (unsigned long)host); - ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED, - mmc_hostname(mmc), host); - if (ret) - goto untasklet; + if (host->version >= SDHCI_SPEC_300) { + init_waitqueue_head(&host->buf_ready_int); - host->vmmc = regulator_get(mmc_dev(mmc), "vmmc"); - if (IS_ERR(host->vmmc)) { - printk(KERN_INFO "%s: no vmmc regulator found\n", mmc_hostname(mmc)); - host->vmmc = NULL; - } else { - regulator_enable(host->vmmc); + /* Initialize re-tuning timer */ + init_timer(&host->tuning_timer); + host->tuning_timer.data = (unsigned long)host; + host->tuning_timer.function = sdhci_tuning_timer; } sdhci_init(host, 0); + ret = request_threaded_irq(host->irq, sdhci_irq, sdhci_thread_irq, + IRQF_SHARED, mmc_hostname(mmc), host); + if (ret) { + pr_err("%s: Failed to request IRQ %d: %d\n", + mmc_hostname(mmc), host->irq, ret); + goto untasklet; + } + #ifdef CONFIG_MMC_DEBUG sdhci_dumpregs(host); #endif @@ -1962,15 +3236,18 @@ int sdhci_add_host(struct sdhci_host *host) host->led.brightness_set = sdhci_led_control; ret = led_classdev_register(mmc_dev(mmc), &host->led); - if (ret) + if (ret) { + pr_err("%s: Failed to register LED device: %d\n", + mmc_hostname(mmc), ret); goto reset; + } #endif mmiowb(); mmc_add_host(mmc); - printk(KERN_INFO "%s: SDHCI controller on %s [%s] using %s\n", + pr_info("%s: SDHCI controller on %s [%s] using %s\n", mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)), (host->flags & SDHCI_USE_ADMA) ? "ADMA" : (host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO"); @@ -1981,11 +3258,12 @@ int sdhci_add_host(struct sdhci_host *host) #ifdef SDHCI_USE_LEDS_CLASS reset: - sdhci_reset(host, SDHCI_RESET_ALL); + sdhci_do_reset(host, SDHCI_RESET_ALL); + sdhci_writel(host, 0, SDHCI_INT_ENABLE); + sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE); free_irq(host->irq, host); #endif untasklet: - tasklet_kill(&host->card_tasklet); tasklet_kill(&host->finish_tasklet); return ret; @@ -2003,7 +3281,7 @@ void sdhci_remove_host(struct sdhci_host *host, int dead) host->flags |= SDHCI_DEVICE_DEAD; if (host->mrq) { - printk(KERN_ERR "%s: Controller removed during " + pr_err("%s: Controller removed during " " transfer!\n", mmc_hostname(host->mmc)); host->mrq->cmd->error = -ENOMEDIUM; @@ -2022,13 +3300,14 @@ void sdhci_remove_host(struct sdhci_host *host, int dead) #endif if (!dead) - sdhci_reset(host, SDHCI_RESET_ALL); + sdhci_do_reset(host, SDHCI_RESET_ALL); + sdhci_writel(host, 0, SDHCI_INT_ENABLE); + sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE); free_irq(host->irq, host); del_timer_sync(&host->timer); - tasklet_kill(&host->card_tasklet); tasklet_kill(&host->finish_tasklet); if (host->vmmc) { @@ -2036,7 +3315,14 @@ void sdhci_remove_host(struct sdhci_host *host, int dead) regulator_put(host->vmmc); } - kfree(host->adma_desc); + if (host->vqmmc) { + regulator_disable(host->vqmmc); + regulator_put(host->vqmmc); + } + + if (host->adma_desc) + dma_free_coherent(mmc_dev(host->mmc), ADMA_SIZE, + host->adma_desc, host->adma_addr); kfree(host->align_buffer); host->adma_desc = NULL; @@ -2060,9 +3346,9 @@ EXPORT_SYMBOL_GPL(sdhci_free_host); static int __init sdhci_drv_init(void) { - printk(KERN_INFO DRIVER_NAME + pr_info(DRIVER_NAME ": Secure Digital Host Controller Interface driver\n"); - printk(KERN_INFO DRIVER_NAME ": Copyright(c) Pierre Ossman\n"); + pr_info(DRIVER_NAME ": Copyright(c) Pierre Ossman\n"); return 0; } @@ -2075,9 +3361,11 @@ module_init(sdhci_drv_init); module_exit(sdhci_drv_exit); module_param(debug_quirks, uint, 0444); +module_param(debug_quirks2, uint, 0444); MODULE_AUTHOR("Pierre Ossman <pierre@ossman.eu>"); MODULE_DESCRIPTION("Secure Digital Host Controller Interface core driver"); MODULE_LICENSE("GPL"); MODULE_PARM_DESC(debug_quirks, "Force certain quirks."); +MODULE_PARM_DESC(debug_quirks2, "Force certain other quirks."); diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index b7b8a3b28b0..4a5cd5e3fa3 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -25,6 +25,7 @@ */ #define SDHCI_DMA_ADDRESS 0x00 +#define SDHCI_ARGUMENT2 SDHCI_DMA_ADDRESS #define SDHCI_BLOCK_SIZE 0x04 #define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF)) @@ -36,7 +37,8 @@ #define SDHCI_TRANSFER_MODE 0x0C #define SDHCI_TRNS_DMA 0x01 #define SDHCI_TRNS_BLK_CNT_EN 0x02 -#define SDHCI_TRNS_ACMD12 0x04 +#define SDHCI_TRNS_AUTO_CMD12 0x04 +#define SDHCI_TRNS_AUTO_CMD23 0x08 #define SDHCI_TRNS_READ 0x10 #define SDHCI_TRNS_MULTI 0x20 @@ -45,6 +47,7 @@ #define SDHCI_CMD_CRC 0x08 #define SDHCI_CMD_INDEX 0x10 #define SDHCI_CMD_DATA 0x20 +#define SDHCI_CMD_ABORTCMD 0xC0 #define SDHCI_CMD_RESP_NONE 0x00 #define SDHCI_CMD_RESP_LONG 0x01 @@ -52,6 +55,7 @@ #define SDHCI_CMD_RESP_SHORT_BUSY 0x03 #define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff)) +#define SDHCI_GET_CMD(c) ((c>>8) & 0x3f) #define SDHCI_RESPONSE 0x10 @@ -66,8 +70,10 @@ #define SDHCI_DATA_AVAILABLE 0x00000800 #define SDHCI_CARD_PRESENT 0x00010000 #define SDHCI_WRITE_PROTECT 0x00080000 +#define SDHCI_DATA_LVL_MASK 0x00F00000 +#define SDHCI_DATA_LVL_SHIFT 20 -#define SDHCI_HOST_CONTROL 0x28 +#define SDHCI_HOST_CONTROL 0x28 #define SDHCI_CTRL_LED 0x01 #define SDHCI_CTRL_4BITBUS 0x02 #define SDHCI_CTRL_HISPD 0x04 @@ -76,7 +82,7 @@ #define SDHCI_CTRL_ADMA1 0x08 #define SDHCI_CTRL_ADMA32 0x10 #define SDHCI_CTRL_ADMA64 0x18 -#define SDHCI_CTRL_8BITBUS 0x20 +#define SDHCI_CTRL_8BITBUS 0x20 #define SDHCI_POWER_CONTROL 0x29 #define SDHCI_POWER_ON 0x01 @@ -87,6 +93,9 @@ #define SDHCI_BLOCK_GAP_CONTROL 0x2A #define SDHCI_WAKE_UP_CONTROL 0x2B +#define SDHCI_WAKE_ON_INT 0x01 +#define SDHCI_WAKE_ON_INSERT 0x02 +#define SDHCI_WAKE_ON_REMOVE 0x04 #define SDHCI_CLOCK_CONTROL 0x2C #define SDHCI_DIVIDER_SHIFT 8 @@ -94,6 +103,7 @@ #define SDHCI_DIV_MASK 0xFF #define SDHCI_DIV_MASK_LEN 8 #define SDHCI_DIV_HI_MASK 0x300 +#define SDHCI_PROG_CLOCK_MODE 0x0020 #define SDHCI_CLOCK_CARD_EN 0x0004 #define SDHCI_CLOCK_INT_STABLE 0x0002 #define SDHCI_CLOCK_INT_EN 0x0001 @@ -110,6 +120,7 @@ #define SDHCI_SIGNAL_ENABLE 0x38 #define SDHCI_INT_RESPONSE 0x00000001 #define SDHCI_INT_DATA_END 0x00000002 +#define SDHCI_INT_BLK_GAP 0x00000004 #define SDHCI_INT_DMA_END 0x00000008 #define SDHCI_INT_SPACE_AVAIL 0x00000010 #define SDHCI_INT_DATA_AVAIL 0x00000020 @@ -136,12 +147,29 @@ #define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \ SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \ SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \ - SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR) + SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR | \ + SDHCI_INT_BLK_GAP) #define SDHCI_INT_ALL_MASK ((unsigned int)-1) #define SDHCI_ACMD12_ERR 0x3C -/* 3E-3F reserved */ +#define SDHCI_HOST_CONTROL2 0x3E +#define SDHCI_CTRL_UHS_MASK 0x0007 +#define SDHCI_CTRL_UHS_SDR12 0x0000 +#define SDHCI_CTRL_UHS_SDR25 0x0001 +#define SDHCI_CTRL_UHS_SDR50 0x0002 +#define SDHCI_CTRL_UHS_SDR104 0x0003 +#define SDHCI_CTRL_UHS_DDR50 0x0004 +#define SDHCI_CTRL_HS_SDR200 0x0005 /* reserved value in SDIO spec */ +#define SDHCI_CTRL_VDD_180 0x0008 +#define SDHCI_CTRL_DRV_TYPE_MASK 0x0030 +#define SDHCI_CTRL_DRV_TYPE_B 0x0000 +#define SDHCI_CTRL_DRV_TYPE_A 0x0010 +#define SDHCI_CTRL_DRV_TYPE_C 0x0020 +#define SDHCI_CTRL_DRV_TYPE_D 0x0030 +#define SDHCI_CTRL_EXEC_TUNING 0x0040 +#define SDHCI_CTRL_TUNED_CLK 0x0080 +#define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000 #define SDHCI_CAPABILITIES 0x40 #define SDHCI_TIMEOUT_CLK_MASK 0x0000003F @@ -152,6 +180,7 @@ #define SDHCI_CLOCK_BASE_SHIFT 8 #define SDHCI_MAX_BLOCK_MASK 0x00030000 #define SDHCI_MAX_BLOCK_SHIFT 16 +#define SDHCI_CAN_DO_8BIT 0x00040000 #define SDHCI_CAN_DO_ADMA2 0x00080000 #define SDHCI_CAN_DO_ADMA1 0x00100000 #define SDHCI_CAN_DO_HISPD 0x00200000 @@ -161,9 +190,31 @@ #define SDHCI_CAN_VDD_180 0x04000000 #define SDHCI_CAN_64BIT 0x10000000 -/* 44-47 reserved for more caps */ - -#define SDHCI_MAX_CURRENT 0x48 +#define SDHCI_SUPPORT_SDR50 0x00000001 +#define SDHCI_SUPPORT_SDR104 0x00000002 +#define SDHCI_SUPPORT_DDR50 0x00000004 +#define SDHCI_DRIVER_TYPE_A 0x00000010 +#define SDHCI_DRIVER_TYPE_C 0x00000020 +#define SDHCI_DRIVER_TYPE_D 0x00000040 +#define SDHCI_RETUNING_TIMER_COUNT_MASK 0x00000F00 +#define SDHCI_RETUNING_TIMER_COUNT_SHIFT 8 +#define SDHCI_USE_SDR50_TUNING 0x00002000 +#define SDHCI_RETUNING_MODE_MASK 0x0000C000 +#define SDHCI_RETUNING_MODE_SHIFT 14 +#define SDHCI_CLOCK_MUL_MASK 0x00FF0000 +#define SDHCI_CLOCK_MUL_SHIFT 16 + +#define SDHCI_CAPABILITIES_1 0x44 + +#define SDHCI_MAX_CURRENT 0x48 +#define SDHCI_MAX_CURRENT_LIMIT 0xFF +#define SDHCI_MAX_CURRENT_330_MASK 0x0000FF +#define SDHCI_MAX_CURRENT_330_SHIFT 0 +#define SDHCI_MAX_CURRENT_300_MASK 0x00FF00 +#define SDHCI_MAX_CURRENT_300_SHIFT 8 +#define SDHCI_MAX_CURRENT_180_MASK 0xFF0000 +#define SDHCI_MAX_CURRENT_180_SHIFT 16 +#define SDHCI_MAX_CURRENT_MULTIPLIER 4 /* 4C-4F reserved for more max current */ @@ -178,6 +229,18 @@ /* 60-FB reserved */ +#define SDHCI_PRESET_FOR_SDR12 0x66 +#define SDHCI_PRESET_FOR_SDR25 0x68 +#define SDHCI_PRESET_FOR_SDR50 0x6A +#define SDHCI_PRESET_FOR_SDR104 0x6C +#define SDHCI_PRESET_FOR_DDR50 0x6E +#define SDHCI_PRESET_DRV_MASK 0xC000 +#define SDHCI_PRESET_DRV_SHIFT 14 +#define SDHCI_PRESET_CLKGEN_SEL_MASK 0x400 +#define SDHCI_PRESET_CLKGEN_SEL_SHIFT 10 +#define SDHCI_PRESET_SDCLK_FREQ_MASK 0x3FF +#define SDHCI_PRESET_SDCLK_FREQ_SHIFT 0 + #define SDHCI_SLOT_INT_STATUS 0xFC #define SDHCI_HOST_VERSION 0xFE @@ -196,6 +259,12 @@ #define SDHCI_MAX_DIV_SPEC_200 256 #define SDHCI_MAX_DIV_SPEC_300 2046 +/* + * Host SDMA buffer boundary. Valid values from 4K to 512K in powers of 2. + */ +#define SDHCI_DEFAULT_BOUNDARY_SIZE (512 * 1024) +#define SDHCI_DEFAULT_BOUNDARY_ARG (ilog2(SDHCI_DEFAULT_BOUNDARY_SIZE) - 12) + struct sdhci_ops { #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS u32 (*read_l)(struct sdhci_host *host, int reg); @@ -212,9 +281,17 @@ struct sdhci_ops { unsigned int (*get_max_clock)(struct sdhci_host *host); unsigned int (*get_min_clock)(struct sdhci_host *host); unsigned int (*get_timeout_clock)(struct sdhci_host *host); + void (*set_bus_width)(struct sdhci_host *host, int width); void (*platform_send_init_74_clocks)(struct sdhci_host *host, u8 power_mode); unsigned int (*get_ro)(struct sdhci_host *host); + void (*reset)(struct sdhci_host *host, u8 mask); + int (*platform_execute_tuning)(struct sdhci_host *host, u32 opcode); + void (*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs); + void (*hw_reset)(struct sdhci_host *host); + void (*adma_workaround)(struct sdhci_host *host, u32 intmask); + void (*platform_init)(struct sdhci_host *host); + void (*card_event)(struct sdhci_host *host); }; #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS @@ -313,10 +390,28 @@ static inline void *sdhci_priv(struct sdhci_host *host) extern void sdhci_card_detect(struct sdhci_host *host); extern int sdhci_add_host(struct sdhci_host *host); extern void sdhci_remove_host(struct sdhci_host *host, int dead); +extern void sdhci_send_command(struct sdhci_host *host, + struct mmc_command *cmd); + +static inline bool sdhci_sdio_irq_enabled(struct sdhci_host *host) +{ + return !!(host->flags & SDHCI_SDIO_IRQ_ENABLED); +} + +void sdhci_set_clock(struct sdhci_host *host, unsigned int clock); +void sdhci_set_bus_width(struct sdhci_host *host, int width); +void sdhci_reset(struct sdhci_host *host, u8 mask); +void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing); #ifdef CONFIG_PM -extern int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state); +extern int sdhci_suspend_host(struct sdhci_host *host); extern int sdhci_resume_host(struct sdhci_host *host); +extern void sdhci_enable_irq_wakeups(struct sdhci_host *host); +#endif + +#ifdef CONFIG_PM_RUNTIME +extern int sdhci_runtime_suspend_host(struct sdhci_host *host); +extern int sdhci_runtime_resume_host(struct sdhci_host *host); #endif #endif /* __SDHCI_HW_H */ diff --git a/drivers/mmc/host/sdricoh_cs.c b/drivers/mmc/host/sdricoh_cs.c index f472c2714eb..b7e30577531 100644 --- a/drivers/mmc/host/sdricoh_cs.c +++ b/drivers/mmc/host/sdricoh_cs.c @@ -26,6 +26,7 @@ */ #include <linux/delay.h> #include <linux/highmem.h> +#include <linux/module.h> #include <linux/pci.h> #include <linux/ioport.h> #include <linux/scatterlist.h> @@ -76,7 +77,7 @@ static unsigned int switchlocked; #define BUSY_TIMEOUT 32767 /* list of supported pcmcia devices */ -static struct pcmcia_device_id pcmcia_ids[] = { +static const struct pcmcia_device_id pcmcia_ids[] = { /* vendor and device strings followed by their crc32 hashes */ PCMCIA_DEVICE_PROD_ID12("RICOH", "Bay1Controller", 0xd9f522ed, 0xc3901202), @@ -446,7 +447,7 @@ static int sdricoh_init_mmc(struct pci_dev *pci_dev, mmc->max_seg_size = 1024 * 512; mmc->max_blk_size = 512; - /* reset the controler */ + /* reset the controller */ if (sdricoh_reset(host)) { dev_dbg(dev, "could not reset\n"); result = -EIO; @@ -478,7 +479,7 @@ static int sdricoh_pcmcia_probe(struct pcmcia_device *pcmcia_dev) dev_info(&pcmcia_dev->dev, "Searching MMC controller for pcmcia device" " %s %s ...\n", pcmcia_dev->prod_id[0], pcmcia_dev->prod_id[1]); - /* search pci cardbus bridge that contains the mmc controler */ + /* search pci cardbus bridge that contains the mmc controller */ /* the io region is already claimed by yenta_socket... */ while ((pci_dev = pci_get_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, @@ -515,9 +516,7 @@ static void sdricoh_pcmcia_detach(struct pcmcia_device *link) #ifdef CONFIG_PM static int sdricoh_pcmcia_suspend(struct pcmcia_device *link) { - struct mmc_host *mmc = link->priv; dev_dbg(&link->dev, "suspend\n"); - mmc_suspend_host(mmc); return 0; } @@ -526,7 +525,6 @@ static int sdricoh_pcmcia_resume(struct pcmcia_device *link) struct mmc_host *mmc = link->priv; dev_dbg(&link->dev, "resume\n"); sdricoh_reset(mmc_priv(mmc)); - mmc_resume_host(mmc); return 0; } #else @@ -542,25 +540,7 @@ static struct pcmcia_driver sdricoh_driver = { .suspend = sdricoh_pcmcia_suspend, .resume = sdricoh_pcmcia_resume, }; - -/*****************************************************************************\ - * * - * Driver init/exit * - * * -\*****************************************************************************/ - -static int __init sdricoh_drv_init(void) -{ - return pcmcia_register_driver(&sdricoh_driver); -} - -static void __exit sdricoh_drv_exit(void) -{ - pcmcia_unregister_driver(&sdricoh_driver); -} - -module_init(sdricoh_drv_init); -module_exit(sdricoh_drv_exit); +module_pcmcia_driver(sdricoh_driver); module_param(switchlocked, uint, 0444); diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c index ddd09840520..656fbba4c42 100644 --- a/drivers/mmc/host/sh_mmcif.c +++ b/drivers/mmc/host/sh_mmcif.c @@ -16,16 +16,54 @@ * */ +/* + * The MMCIF driver is now processing MMC requests asynchronously, according + * to the Linux MMC API requirement. + * + * The MMCIF driver processes MMC requests in up to 3 stages: command, optional + * data, and optional stop. To achieve asynchronous processing each of these + * stages is split into two halves: a top and a bottom half. The top half + * initialises the hardware, installs a timeout handler to handle completion + * timeouts, and returns. In case of the command stage this immediately returns + * control to the caller, leaving all further processing to run asynchronously. + * All further request processing is performed by the bottom halves. + * + * The bottom half further consists of a "hard" IRQ handler, an IRQ handler + * thread, a DMA completion callback, if DMA is used, a timeout work, and + * request- and stage-specific handler methods. + * + * Each bottom half run begins with either a hardware interrupt, a DMA callback + * invocation, or a timeout work run. In case of an error or a successful + * processing completion, the MMC core is informed and the request processing is + * finished. In case processing has to continue, i.e., if data has to be read + * from or written to the card, or if a stop command has to be sent, the next + * top half is called, which performs the necessary hardware handling and + * reschedules the timeout work. This returns the driver state machine into the + * bottom half waiting state. + */ + +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/completion.h> +#include <linux/delay.h> #include <linux/dma-mapping.h> -#include <linux/mmc/host.h> +#include <linux/dmaengine.h> #include <linux/mmc/card.h> #include <linux/mmc/core.h> +#include <linux/mmc/host.h> #include <linux/mmc/mmc.h> #include <linux/mmc/sdio.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/clk.h> #include <linux/mmc/sh_mmcif.h> +#include <linux/mmc/slot-gpio.h> +#include <linux/mod_devicetable.h> +#include <linux/mutex.h> +#include <linux/pagemap.h> +#include <linux/platform_device.h> +#include <linux/pm_qos.h> +#include <linux/pm_runtime.h> +#include <linux/sh_dma.h> +#include <linux/spinlock.h> +#include <linux/module.h> #define DRIVER_NAME "sh_mmcif" #define DRIVER_VERSION "2010-04-28" @@ -52,6 +90,7 @@ #define CMD_SET_TBIT (1 << 7) /* 1: tran mission bit "Low" */ #define CMD_SET_OPDM (1 << 6) /* 1: open/drain */ #define CMD_SET_CCSH (1 << 5) +#define CMD_SET_DARS (1 << 2) /* Dual Data Rate */ #define CMD_SET_DATW_1 ((0 << 1) | (0 << 0)) /* 1bit */ #define CMD_SET_DATW_4 ((0 << 1) | (1 << 0)) /* 4bit */ #define CMD_SET_DATW_8 ((1 << 1) | (0 << 0)) /* 8bit */ @@ -62,25 +101,6 @@ /* CE_BLOCK_SET */ #define BLOCK_SIZE_MASK 0x0000ffff -/* CE_CLK_CTRL */ -#define CLK_ENABLE (1 << 24) /* 1: output mmc clock */ -#define CLK_CLEAR ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16)) -#define CLK_SUP_PCLK ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16)) -#define SRSPTO_256 ((1 << 13) | (0 << 12)) /* resp timeout */ -#define SRBSYTO_29 ((1 << 11) | (1 << 10) | \ - (1 << 9) | (1 << 8)) /* resp busy timeout */ -#define SRWDTO_29 ((1 << 7) | (1 << 6) | \ - (1 << 5) | (1 << 4)) /* read/write timeout */ -#define SCCSTO_29 ((1 << 3) | (1 << 2) | \ - (1 << 1) | (1 << 0)) /* ccs timeout */ - -/* CE_BUF_ACC */ -#define BUF_ACC_DMAWEN (1 << 25) -#define BUF_ACC_DMAREN (1 << 24) -#define BUF_ACC_BUSW_32 (0 << 17) -#define BUF_ACC_BUSW_16 (1 << 17) -#define BUF_ACC_ATYP (1 << 16) - /* CE_INT */ #define INT_CCSDE (1 << 29) #define INT_CMD12DRE (1 << 26) @@ -110,6 +130,12 @@ INT_CCSTO | INT_CRCSTO | INT_WDATTO | \ INT_RDATTO | INT_RBSYTO | INT_RSPTO) +#define INT_ALL (INT_RBSYE | INT_CRSPE | INT_BUFREN | \ + INT_BUFWEN | INT_CMD12DRE | INT_BUFRE | \ + INT_DTRANE | INT_CMD12RBE | INT_CMD12CRE) + +#define INT_CCS (INT_CCSTO | INT_CCSRCV | INT_CCSDE) + /* CE_INT_MASK */ #define MASK_ALL 0x00000000 #define MASK_MCCSDE (1 << 29) @@ -136,6 +162,16 @@ #define MASK_MRBSYTO (1 << 1) #define MASK_MRSPTO (1 << 0) +#define MASK_START_CMD (MASK_MCMDVIO | MASK_MBUFVIO | MASK_MWDATERR | \ + MASK_MRDATERR | MASK_MRIDXERR | MASK_MRSPERR | \ + MASK_MCRCSTO | MASK_MWDATTO | \ + MASK_MRDATTO | MASK_MRBSYTO | MASK_MRSPTO) + +#define MASK_CLEAN (INT_ERR_STS | MASK_MRBSYE | MASK_MCRSPE | \ + MASK_MBUFREN | MASK_MBUFWEN | \ + MASK_MCMD12DRE | MASK_MBUFRE | MASK_MDTRANE | \ + MASK_MCMD12RBE | MASK_MCMD12CRE) + /* CE_HOST_STS1 */ #define STS1_CMDSEQ (1 << 31) @@ -165,30 +201,62 @@ STS2_AC12BSYTO | STS2_RSPBSYTO | \ STS2_AC12RSPTO | STS2_RSPTO) -/* CE_VERSION */ -#define SOFT_RST_ON (1 << 31) -#define SOFT_RST_OFF (0 << 31) - #define CLKDEV_EMMC_DATA 52000000 /* 52MHz */ #define CLKDEV_MMC_DATA 20000000 /* 20MHz */ #define CLKDEV_INIT 400000 /* 400 KHz */ +enum mmcif_state { + STATE_IDLE, + STATE_REQUEST, + STATE_IOS, + STATE_TIMEOUT, +}; + +enum mmcif_wait_for { + MMCIF_WAIT_FOR_REQUEST, + MMCIF_WAIT_FOR_CMD, + MMCIF_WAIT_FOR_MREAD, + MMCIF_WAIT_FOR_MWRITE, + MMCIF_WAIT_FOR_READ, + MMCIF_WAIT_FOR_WRITE, + MMCIF_WAIT_FOR_READ_END, + MMCIF_WAIT_FOR_WRITE_END, + MMCIF_WAIT_FOR_STOP, +}; + struct sh_mmcif_host { struct mmc_host *mmc; - struct mmc_data *data; - struct mmc_command *cmd; + struct mmc_request *mrq; struct platform_device *pd; struct clk *hclk; unsigned int clk; int bus_width; - u16 wait_int; - u16 sd_error; + unsigned char timing; + bool sd_error; + bool dying; long timeout; void __iomem *addr; - wait_queue_head_t intr_wait; + u32 *pio_ptr; + spinlock_t lock; /* protect sh_mmcif_host::state */ + enum mmcif_state state; + enum mmcif_wait_for wait_for; + struct delayed_work timeout_work; + size_t blocksize; + int sg_idx; + int sg_blkidx; + bool power; + bool card_present; + bool ccs_enable; /* Command Completion Signal support */ + bool clk_ctrl2_enable; + struct mutex thread_lock; + + /* DMA support */ + struct dma_chan *chan_rx; + struct dma_chan *chan_tx; + struct completion dma_complete; + bool dma_active; }; - static inline void sh_mmcif_bitset(struct sh_mmcif_host *host, unsigned int reg, u32 val) { @@ -201,21 +269,223 @@ static inline void sh_mmcif_bitclr(struct sh_mmcif_host *host, writel(~val & readl(host->addr + reg), host->addr + reg); } +static void mmcif_dma_complete(void *arg) +{ + struct sh_mmcif_host *host = arg; + struct mmc_request *mrq = host->mrq; + + dev_dbg(&host->pd->dev, "Command completed\n"); + + if (WARN(!mrq || !mrq->data, "%s: NULL data in DMA completion!\n", + dev_name(&host->pd->dev))) + return; + + complete(&host->dma_complete); +} + +static void sh_mmcif_start_dma_rx(struct sh_mmcif_host *host) +{ + struct mmc_data *data = host->mrq->data; + struct scatterlist *sg = data->sg; + struct dma_async_tx_descriptor *desc = NULL; + struct dma_chan *chan = host->chan_rx; + dma_cookie_t cookie = -EINVAL; + int ret; + + ret = dma_map_sg(chan->device->dev, sg, data->sg_len, + DMA_FROM_DEVICE); + if (ret > 0) { + host->dma_active = true; + desc = dmaengine_prep_slave_sg(chan, sg, ret, + DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + } + + if (desc) { + desc->callback = mmcif_dma_complete; + desc->callback_param = host; + cookie = dmaengine_submit(desc); + sh_mmcif_bitset(host, MMCIF_CE_BUF_ACC, BUF_ACC_DMAREN); + dma_async_issue_pending(chan); + } + dev_dbg(&host->pd->dev, "%s(): mapped %d -> %d, cookie %d\n", + __func__, data->sg_len, ret, cookie); + + if (!desc) { + /* DMA failed, fall back to PIO */ + if (ret >= 0) + ret = -EIO; + host->chan_rx = NULL; + host->dma_active = false; + dma_release_channel(chan); + /* Free the Tx channel too */ + chan = host->chan_tx; + if (chan) { + host->chan_tx = NULL; + dma_release_channel(chan); + } + dev_warn(&host->pd->dev, + "DMA failed: %d, falling back to PIO\n", ret); + sh_mmcif_bitclr(host, MMCIF_CE_BUF_ACC, BUF_ACC_DMAREN | BUF_ACC_DMAWEN); + } + + dev_dbg(&host->pd->dev, "%s(): desc %p, cookie %d, sg[%d]\n", __func__, + desc, cookie, data->sg_len); +} + +static void sh_mmcif_start_dma_tx(struct sh_mmcif_host *host) +{ + struct mmc_data *data = host->mrq->data; + struct scatterlist *sg = data->sg; + struct dma_async_tx_descriptor *desc = NULL; + struct dma_chan *chan = host->chan_tx; + dma_cookie_t cookie = -EINVAL; + int ret; + + ret = dma_map_sg(chan->device->dev, sg, data->sg_len, + DMA_TO_DEVICE); + if (ret > 0) { + host->dma_active = true; + desc = dmaengine_prep_slave_sg(chan, sg, ret, + DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + } + + if (desc) { + desc->callback = mmcif_dma_complete; + desc->callback_param = host; + cookie = dmaengine_submit(desc); + sh_mmcif_bitset(host, MMCIF_CE_BUF_ACC, BUF_ACC_DMAWEN); + dma_async_issue_pending(chan); + } + dev_dbg(&host->pd->dev, "%s(): mapped %d -> %d, cookie %d\n", + __func__, data->sg_len, ret, cookie); + + if (!desc) { + /* DMA failed, fall back to PIO */ + if (ret >= 0) + ret = -EIO; + host->chan_tx = NULL; + host->dma_active = false; + dma_release_channel(chan); + /* Free the Rx channel too */ + chan = host->chan_rx; + if (chan) { + host->chan_rx = NULL; + dma_release_channel(chan); + } + dev_warn(&host->pd->dev, + "DMA failed: %d, falling back to PIO\n", ret); + sh_mmcif_bitclr(host, MMCIF_CE_BUF_ACC, BUF_ACC_DMAREN | BUF_ACC_DMAWEN); + } + + dev_dbg(&host->pd->dev, "%s(): desc %p, cookie %d\n", __func__, + desc, cookie); +} + +static struct dma_chan * +sh_mmcif_request_dma_one(struct sh_mmcif_host *host, + struct sh_mmcif_plat_data *pdata, + enum dma_transfer_direction direction) +{ + struct dma_slave_config cfg; + struct dma_chan *chan; + unsigned int slave_id; + struct resource *res; + dma_cap_mask_t mask; + int ret; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + if (pdata) + slave_id = direction == DMA_MEM_TO_DEV + ? pdata->slave_id_tx : pdata->slave_id_rx; + else + slave_id = 0; + + chan = dma_request_slave_channel_compat(mask, shdma_chan_filter, + (void *)(unsigned long)slave_id, &host->pd->dev, + direction == DMA_MEM_TO_DEV ? "tx" : "rx"); + + dev_dbg(&host->pd->dev, "%s: %s: got channel %p\n", __func__, + direction == DMA_MEM_TO_DEV ? "TX" : "RX", chan); + + if (!chan) + return NULL; + + res = platform_get_resource(host->pd, IORESOURCE_MEM, 0); + + /* In the OF case the driver will get the slave ID from the DT */ + cfg.slave_id = slave_id; + cfg.direction = direction; + cfg.dst_addr = res->start + MMCIF_CE_DATA; + cfg.src_addr = 0; + ret = dmaengine_slave_config(chan, &cfg); + if (ret < 0) { + dma_release_channel(chan); + return NULL; + } + + return chan; +} + +static void sh_mmcif_request_dma(struct sh_mmcif_host *host, + struct sh_mmcif_plat_data *pdata) +{ + host->dma_active = false; + + if (pdata) { + if (pdata->slave_id_tx <= 0 || pdata->slave_id_rx <= 0) + return; + } else if (!host->pd->dev.of_node) { + return; + } + + /* We can only either use DMA for both Tx and Rx or not use it at all */ + host->chan_tx = sh_mmcif_request_dma_one(host, pdata, DMA_MEM_TO_DEV); + if (!host->chan_tx) + return; + + host->chan_rx = sh_mmcif_request_dma_one(host, pdata, DMA_DEV_TO_MEM); + if (!host->chan_rx) { + dma_release_channel(host->chan_tx); + host->chan_tx = NULL; + } +} + +static void sh_mmcif_release_dma(struct sh_mmcif_host *host) +{ + sh_mmcif_bitclr(host, MMCIF_CE_BUF_ACC, BUF_ACC_DMAREN | BUF_ACC_DMAWEN); + /* Descriptors are freed automatically */ + if (host->chan_tx) { + struct dma_chan *chan = host->chan_tx; + host->chan_tx = NULL; + dma_release_channel(chan); + } + if (host->chan_rx) { + struct dma_chan *chan = host->chan_rx; + host->chan_rx = NULL; + dma_release_channel(chan); + } + + host->dma_active = false; +} static void sh_mmcif_clock_control(struct sh_mmcif_host *host, unsigned int clk) { struct sh_mmcif_plat_data *p = host->pd->dev.platform_data; + bool sup_pclk = p ? p->sup_pclk : false; sh_mmcif_bitclr(host, MMCIF_CE_CLK_CTRL, CLK_ENABLE); sh_mmcif_bitclr(host, MMCIF_CE_CLK_CTRL, CLK_CLEAR); if (!clk) return; - if (p->sup_pclk && clk == host->clk) + if (sup_pclk && clk == host->clk) sh_mmcif_bitset(host, MMCIF_CE_CLK_CTRL, CLK_SUP_PCLK); else sh_mmcif_bitset(host, MMCIF_CE_CLK_CTRL, CLK_CLEAR & - (ilog2(__rounddown_pow_of_two(host->clk / clk)) << 16)); + ((fls(DIV_ROUND_UP(host->clk, + clk) - 1) - 1) << 16)); sh_mmcif_bitset(host, MMCIF_CE_CLK_CTRL, CLK_ENABLE); } @@ -228,8 +498,12 @@ static void sh_mmcif_sync_reset(struct sh_mmcif_host *host) sh_mmcif_writel(host->addr, MMCIF_CE_VERSION, SOFT_RST_ON); sh_mmcif_writel(host->addr, MMCIF_CE_VERSION, SOFT_RST_OFF); + if (host->ccs_enable) + tmp |= SCCSTO_29; + if (host->clk_ctrl2_enable) + sh_mmcif_writel(host->addr, MMCIF_CE_CLK_CTRL2, 0x0F0F0000); sh_mmcif_bitset(host, MMCIF_CE_CLK_CTRL, tmp | - SRSPTO_256 | SRBSYTO_29 | SRWDTO_29 | SCCSTO_29); + SRSPTO_256 | SRBSYTO_29 | SRWDTO_29); /* byte swap on */ sh_mmcif_bitset(host, MMCIF_CE_BUF_ACC, BUF_ACC_ATYP); } @@ -237,187 +511,224 @@ static void sh_mmcif_sync_reset(struct sh_mmcif_host *host) static int sh_mmcif_error_manage(struct sh_mmcif_host *host) { u32 state1, state2; - int ret, timeout = 10000000; + int ret, timeout; - host->sd_error = 0; - host->wait_int = 0; + host->sd_error = false; state1 = sh_mmcif_readl(host->addr, MMCIF_CE_HOST_STS1); state2 = sh_mmcif_readl(host->addr, MMCIF_CE_HOST_STS2); - pr_debug("%s: ERR HOST_STS1 = %08x\n", DRIVER_NAME, state1); - pr_debug("%s: ERR HOST_STS2 = %08x\n", DRIVER_NAME, state2); + dev_dbg(&host->pd->dev, "ERR HOST_STS1 = %08x\n", state1); + dev_dbg(&host->pd->dev, "ERR HOST_STS2 = %08x\n", state2); if (state1 & STS1_CMDSEQ) { sh_mmcif_bitset(host, MMCIF_CE_CMD_CTRL, CMD_CTRL_BREAK); sh_mmcif_bitset(host, MMCIF_CE_CMD_CTRL, ~CMD_CTRL_BREAK); - while (1) { - timeout--; - if (timeout < 0) { - pr_err(DRIVER_NAME": Forceed end of " \ - "command sequence timeout err\n"); - return -EIO; - } + for (timeout = 10000000; timeout; timeout--) { if (!(sh_mmcif_readl(host->addr, MMCIF_CE_HOST_STS1) - & STS1_CMDSEQ)) + & STS1_CMDSEQ)) break; mdelay(1); } + if (!timeout) { + dev_err(&host->pd->dev, + "Forced end of command sequence timeout err\n"); + return -EIO; + } sh_mmcif_sync_reset(host); - pr_debug(DRIVER_NAME": Forced end of command sequence\n"); + dev_dbg(&host->pd->dev, "Forced end of command sequence\n"); return -EIO; } if (state2 & STS2_CRC_ERR) { - pr_debug(DRIVER_NAME": Happened CRC error\n"); + dev_err(&host->pd->dev, " CRC error: state %u, wait %u\n", + host->state, host->wait_for); ret = -EIO; } else if (state2 & STS2_TIMEOUT_ERR) { - pr_debug(DRIVER_NAME": Happened Timeout error\n"); + dev_err(&host->pd->dev, " Timeout: state %u, wait %u\n", + host->state, host->wait_for); ret = -ETIMEDOUT; } else { - pr_debug(DRIVER_NAME": Happened End/Index error\n"); + dev_dbg(&host->pd->dev, " End/Index error: state %u, wait %u\n", + host->state, host->wait_for); ret = -EIO; } return ret; } -static int sh_mmcif_single_read(struct sh_mmcif_host *host, - struct mmc_request *mrq) +static bool sh_mmcif_next_block(struct sh_mmcif_host *host, u32 *p) { - struct mmc_data *data = mrq->data; - long time; - u32 blocksize, i, *p = sg_virt(data->sg); + struct mmc_data *data = host->mrq->data; + + host->sg_blkidx += host->blocksize; + + /* data->sg->length must be a multiple of host->blocksize? */ + BUG_ON(host->sg_blkidx > data->sg->length); - host->wait_int = 0; + if (host->sg_blkidx == data->sg->length) { + host->sg_blkidx = 0; + if (++host->sg_idx < data->sg_len) + host->pio_ptr = sg_virt(++data->sg); + } else { + host->pio_ptr = p; + } + + return host->sg_idx != data->sg_len; +} + +static void sh_mmcif_single_read(struct sh_mmcif_host *host, + struct mmc_request *mrq) +{ + host->blocksize = (sh_mmcif_readl(host->addr, MMCIF_CE_BLOCK_SET) & + BLOCK_SIZE_MASK) + 3; + + host->wait_for = MMCIF_WAIT_FOR_READ; /* buf read enable */ sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFREN); - time = wait_event_interruptible_timeout(host->intr_wait, - host->wait_int == 1 || - host->sd_error == 1, host->timeout); - if (host->wait_int != 1 && (time == 0 || host->sd_error != 0)) - return sh_mmcif_error_manage(host); - - host->wait_int = 0; - blocksize = (BLOCK_SIZE_MASK & - sh_mmcif_readl(host->addr, MMCIF_CE_BLOCK_SET)) + 3; - for (i = 0; i < blocksize / 4; i++) +} + +static bool sh_mmcif_read_block(struct sh_mmcif_host *host) +{ + struct mmc_data *data = host->mrq->data; + u32 *p = sg_virt(data->sg); + int i; + + if (host->sd_error) { + data->error = sh_mmcif_error_manage(host); + dev_dbg(&host->pd->dev, "%s(): %d\n", __func__, data->error); + return false; + } + + for (i = 0; i < host->blocksize / 4; i++) *p++ = sh_mmcif_readl(host->addr, MMCIF_CE_DATA); /* buffer read end */ sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFRE); - time = wait_event_interruptible_timeout(host->intr_wait, - host->wait_int == 1 || - host->sd_error == 1, host->timeout); - if (host->wait_int != 1 && (time == 0 || host->sd_error != 0)) - return sh_mmcif_error_manage(host); + host->wait_for = MMCIF_WAIT_FOR_READ_END; - host->wait_int = 0; - return 0; + return true; } -static int sh_mmcif_multi_read(struct sh_mmcif_host *host, - struct mmc_request *mrq) +static void sh_mmcif_multi_read(struct sh_mmcif_host *host, + struct mmc_request *mrq) { struct mmc_data *data = mrq->data; - long time; - u32 blocksize, i, j, sec, *p; - - blocksize = BLOCK_SIZE_MASK & sh_mmcif_readl(host->addr, - MMCIF_CE_BLOCK_SET); - for (j = 0; j < data->sg_len; j++) { - p = sg_virt(data->sg); - host->wait_int = 0; - for (sec = 0; sec < data->sg->length / blocksize; sec++) { - sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFREN); - /* buf read enable */ - time = wait_event_interruptible_timeout(host->intr_wait, - host->wait_int == 1 || - host->sd_error == 1, host->timeout); - - if (host->wait_int != 1 && - (time == 0 || host->sd_error != 0)) - return sh_mmcif_error_manage(host); - - host->wait_int = 0; - for (i = 0; i < blocksize / 4; i++) - *p++ = sh_mmcif_readl(host->addr, - MMCIF_CE_DATA); - } - if (j < data->sg_len - 1) - data->sg++; + + if (!data->sg_len || !data->sg->length) + return; + + host->blocksize = sh_mmcif_readl(host->addr, MMCIF_CE_BLOCK_SET) & + BLOCK_SIZE_MASK; + + host->wait_for = MMCIF_WAIT_FOR_MREAD; + host->sg_idx = 0; + host->sg_blkidx = 0; + host->pio_ptr = sg_virt(data->sg); + + sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFREN); +} + +static bool sh_mmcif_mread_block(struct sh_mmcif_host *host) +{ + struct mmc_data *data = host->mrq->data; + u32 *p = host->pio_ptr; + int i; + + if (host->sd_error) { + data->error = sh_mmcif_error_manage(host); + dev_dbg(&host->pd->dev, "%s(): %d\n", __func__, data->error); + return false; } - return 0; + + BUG_ON(!data->sg->length); + + for (i = 0; i < host->blocksize / 4; i++) + *p++ = sh_mmcif_readl(host->addr, MMCIF_CE_DATA); + + if (!sh_mmcif_next_block(host, p)) + return false; + + sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFREN); + + return true; } -static int sh_mmcif_single_write(struct sh_mmcif_host *host, +static void sh_mmcif_single_write(struct sh_mmcif_host *host, struct mmc_request *mrq) { - struct mmc_data *data = mrq->data; - long time; - u32 blocksize, i, *p = sg_virt(data->sg); + host->blocksize = (sh_mmcif_readl(host->addr, MMCIF_CE_BLOCK_SET) & + BLOCK_SIZE_MASK) + 3; - host->wait_int = 0; - sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFWEN); + host->wait_for = MMCIF_WAIT_FOR_WRITE; /* buf write enable */ - time = wait_event_interruptible_timeout(host->intr_wait, - host->wait_int == 1 || - host->sd_error == 1, host->timeout); - if (host->wait_int != 1 && (time == 0 || host->sd_error != 0)) - return sh_mmcif_error_manage(host); - - host->wait_int = 0; - blocksize = (BLOCK_SIZE_MASK & - sh_mmcif_readl(host->addr, MMCIF_CE_BLOCK_SET)) + 3; - for (i = 0; i < blocksize / 4; i++) + sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFWEN); +} + +static bool sh_mmcif_write_block(struct sh_mmcif_host *host) +{ + struct mmc_data *data = host->mrq->data; + u32 *p = sg_virt(data->sg); + int i; + + if (host->sd_error) { + data->error = sh_mmcif_error_manage(host); + dev_dbg(&host->pd->dev, "%s(): %d\n", __func__, data->error); + return false; + } + + for (i = 0; i < host->blocksize / 4; i++) sh_mmcif_writel(host->addr, MMCIF_CE_DATA, *p++); /* buffer write end */ sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MDTRANE); + host->wait_for = MMCIF_WAIT_FOR_WRITE_END; - time = wait_event_interruptible_timeout(host->intr_wait, - host->wait_int == 1 || - host->sd_error == 1, host->timeout); - if (host->wait_int != 1 && (time == 0 || host->sd_error != 0)) - return sh_mmcif_error_manage(host); - - host->wait_int = 0; - return 0; + return true; } -static int sh_mmcif_multi_write(struct sh_mmcif_host *host, - struct mmc_request *mrq) +static void sh_mmcif_multi_write(struct sh_mmcif_host *host, + struct mmc_request *mrq) { struct mmc_data *data = mrq->data; - long time; - u32 i, sec, j, blocksize, *p; - - blocksize = BLOCK_SIZE_MASK & sh_mmcif_readl(host->addr, - MMCIF_CE_BLOCK_SET); - - for (j = 0; j < data->sg_len; j++) { - p = sg_virt(data->sg); - host->wait_int = 0; - for (sec = 0; sec < data->sg->length / blocksize; sec++) { - sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFWEN); - /* buf write enable*/ - time = wait_event_interruptible_timeout(host->intr_wait, - host->wait_int == 1 || - host->sd_error == 1, host->timeout); - - if (host->wait_int != 1 && - (time == 0 || host->sd_error != 0)) - return sh_mmcif_error_manage(host); - - host->wait_int = 0; - for (i = 0; i < blocksize / 4; i++) - sh_mmcif_writel(host->addr, - MMCIF_CE_DATA, *p++); - } - if (j < data->sg_len - 1) - data->sg++; + + if (!data->sg_len || !data->sg->length) + return; + + host->blocksize = sh_mmcif_readl(host->addr, MMCIF_CE_BLOCK_SET) & + BLOCK_SIZE_MASK; + + host->wait_for = MMCIF_WAIT_FOR_MWRITE; + host->sg_idx = 0; + host->sg_blkidx = 0; + host->pio_ptr = sg_virt(data->sg); + + sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFWEN); +} + +static bool sh_mmcif_mwrite_block(struct sh_mmcif_host *host) +{ + struct mmc_data *data = host->mrq->data; + u32 *p = host->pio_ptr; + int i; + + if (host->sd_error) { + data->error = sh_mmcif_error_manage(host); + dev_dbg(&host->pd->dev, "%s(): %d\n", __func__, data->error); + return false; } - return 0; + + BUG_ON(!data->sg->length); + + for (i = 0; i < host->blocksize / 4; i++) + sh_mmcif_writel(host->addr, MMCIF_CE_DATA, *p++); + + if (!sh_mmcif_next_block(host, p)) + return false; + + sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFWEN); + + return true; } static void sh_mmcif_get_response(struct sh_mmcif_host *host, @@ -439,8 +750,11 @@ static void sh_mmcif_get_cmd12response(struct sh_mmcif_host *host, } static u32 sh_mmcif_set_cmd(struct sh_mmcif_host *host, - struct mmc_request *mrq, struct mmc_command *cmd, u32 opc) + struct mmc_request *mrq) { + struct mmc_data *data = mrq->data; + struct mmc_command *cmd = mrq->cmd; + u32 opc = cmd->opcode; u32 tmp = 0; /* Response Type check */ @@ -457,22 +771,22 @@ static u32 sh_mmcif_set_cmd(struct sh_mmcif_host *host, tmp |= CMD_SET_RTYP_17B; break; default: - pr_err(DRIVER_NAME": Not support type response.\n"); + dev_err(&host->pd->dev, "Unsupported response type.\n"); break; } switch (opc) { /* RBSY */ + case MMC_SLEEP_AWAKE: case MMC_SWITCH: case MMC_STOP_TRANSMISSION: case MMC_SET_WRITE_PROT: case MMC_CLR_WRITE_PROT: case MMC_ERASE: - case MMC_GEN_CMD: tmp |= CMD_SET_RBSY; break; } /* WDAT / DATW */ - if (host->data) { + if (data) { tmp |= CMD_SET_WDAT; switch (host->bus_width) { case MMC_BUS_WIDTH_1: @@ -485,7 +799,19 @@ static u32 sh_mmcif_set_cmd(struct sh_mmcif_host *host, tmp |= CMD_SET_DATW_8; break; default: - pr_err(DRIVER_NAME": Not support bus width.\n"); + dev_err(&host->pd->dev, "Unsupported bus width.\n"); + break; + } + switch (host->timing) { + case MMC_TIMING_MMC_DDR52: + /* + * MMC core will only set this timing, if the host + * advertises the MMC_CAP_1_8V_DDR/MMC_CAP_1_2V_DDR + * capability. MMCIF implementations with this + * capability, e.g. sh73a0, will have to set it + * in their platform data. + */ + tmp |= CMD_SET_DARS; break; } } @@ -496,7 +822,7 @@ static u32 sh_mmcif_set_cmd(struct sh_mmcif_host *host, if (opc == MMC_READ_MULTIPLE_BLOCK || opc == MMC_WRITE_MULTIPLE_BLOCK) { tmp |= CMD_SET_CMLTE | CMD_SET_CMD12EN; sh_mmcif_bitset(host, MMCIF_CE_BLOCK_SET, - mrq->data->blocks << 16); + data->blocks << 16); } /* RIDXC[1:0] check bits */ if (opc == MMC_SEND_OP_COND || opc == MMC_ALL_SEND_CID || @@ -510,212 +836,225 @@ static u32 sh_mmcif_set_cmd(struct sh_mmcif_host *host, opc == MMC_SEND_CSD || opc == MMC_SEND_CID) tmp |= CMD_SET_CRC7C_INTERNAL; - return opc = ((opc << 24) | tmp); + return (opc << 24) | tmp; } -static u32 sh_mmcif_data_trans(struct sh_mmcif_host *host, - struct mmc_request *mrq, u32 opc) +static int sh_mmcif_data_trans(struct sh_mmcif_host *host, + struct mmc_request *mrq, u32 opc) { - u32 ret; - switch (opc) { case MMC_READ_MULTIPLE_BLOCK: - ret = sh_mmcif_multi_read(host, mrq); - break; + sh_mmcif_multi_read(host, mrq); + return 0; case MMC_WRITE_MULTIPLE_BLOCK: - ret = sh_mmcif_multi_write(host, mrq); - break; + sh_mmcif_multi_write(host, mrq); + return 0; case MMC_WRITE_BLOCK: - ret = sh_mmcif_single_write(host, mrq); - break; + sh_mmcif_single_write(host, mrq); + return 0; case MMC_READ_SINGLE_BLOCK: case MMC_SEND_EXT_CSD: - ret = sh_mmcif_single_read(host, mrq); - break; + sh_mmcif_single_read(host, mrq); + return 0; default: - pr_err(DRIVER_NAME": NOT SUPPORT CMD = d'%08d\n", opc); - ret = -EINVAL; - break; + dev_err(&host->pd->dev, "Unsupported CMD%d\n", opc); + return -EINVAL; } - return ret; } static void sh_mmcif_start_cmd(struct sh_mmcif_host *host, - struct mmc_request *mrq, struct mmc_command *cmd) + struct mmc_request *mrq) { - long time; - int ret = 0, mask = 0; + struct mmc_command *cmd = mrq->cmd; u32 opc = cmd->opcode; - - host->cmd = cmd; + u32 mask; switch (opc) { - /* respons busy check */ + /* response busy check */ + case MMC_SLEEP_AWAKE: case MMC_SWITCH: case MMC_STOP_TRANSMISSION: case MMC_SET_WRITE_PROT: case MMC_CLR_WRITE_PROT: case MMC_ERASE: - case MMC_GEN_CMD: - mask = MASK_MRBSYE; + mask = MASK_START_CMD | MASK_MRBSYE; break; default: - mask = MASK_MCRSPE; + mask = MASK_START_CMD | MASK_MCRSPE; break; } - mask |= MASK_MCMDVIO | MASK_MBUFVIO | MASK_MWDATERR | - MASK_MRDATERR | MASK_MRIDXERR | MASK_MRSPERR | - MASK_MCCSTO | MASK_MCRCSTO | MASK_MWDATTO | - MASK_MRDATTO | MASK_MRBSYTO | MASK_MRSPTO; - if (host->data) { + if (host->ccs_enable) + mask |= MASK_MCCSTO; + + if (mrq->data) { sh_mmcif_writel(host->addr, MMCIF_CE_BLOCK_SET, 0); sh_mmcif_writel(host->addr, MMCIF_CE_BLOCK_SET, mrq->data->blksz); } - opc = sh_mmcif_set_cmd(host, mrq, cmd, opc); + opc = sh_mmcif_set_cmd(host, mrq); - sh_mmcif_writel(host->addr, MMCIF_CE_INT, 0xD80430C0); + if (host->ccs_enable) + sh_mmcif_writel(host->addr, MMCIF_CE_INT, 0xD80430C0); + else + sh_mmcif_writel(host->addr, MMCIF_CE_INT, 0xD80430C0 | INT_CCS); sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, mask); /* set arg */ sh_mmcif_writel(host->addr, MMCIF_CE_ARG, cmd->arg); - host->wait_int = 0; /* set cmd */ sh_mmcif_writel(host->addr, MMCIF_CE_CMD_SET, opc); - time = wait_event_interruptible_timeout(host->intr_wait, - host->wait_int == 1 || host->sd_error == 1, host->timeout); - if (host->wait_int != 1 && time == 0) { - cmd->error = sh_mmcif_error_manage(host); - return; - } - if (host->sd_error) { - switch (cmd->opcode) { - case MMC_ALL_SEND_CID: - case MMC_SELECT_CARD: - case MMC_APP_CMD: - cmd->error = -ETIMEDOUT; - break; - default: - pr_debug("%s: Cmd(d'%d) err\n", - DRIVER_NAME, cmd->opcode); - cmd->error = sh_mmcif_error_manage(host); - break; - } - host->sd_error = 0; - host->wait_int = 0; - return; - } - if (!(cmd->flags & MMC_RSP_PRESENT)) { - cmd->error = ret; - host->wait_int = 0; - return; - } - if (host->wait_int == 1) { - sh_mmcif_get_response(host, cmd); - host->wait_int = 0; - } - if (host->data) { - ret = sh_mmcif_data_trans(host, mrq, cmd->opcode); - if (ret < 0) - mrq->data->bytes_xfered = 0; - else - mrq->data->bytes_xfered = - mrq->data->blocks * mrq->data->blksz; - } - cmd->error = ret; + host->wait_for = MMCIF_WAIT_FOR_CMD; + schedule_delayed_work(&host->timeout_work, host->timeout); } static void sh_mmcif_stop_cmd(struct sh_mmcif_host *host, - struct mmc_request *mrq, struct mmc_command *cmd) + struct mmc_request *mrq) { - long time; - - if (mrq->cmd->opcode == MMC_READ_MULTIPLE_BLOCK) + switch (mrq->cmd->opcode) { + case MMC_READ_MULTIPLE_BLOCK: sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MCMD12DRE); - else if (mrq->cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK) + break; + case MMC_WRITE_MULTIPLE_BLOCK: sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MCMD12RBE); - else { - pr_err(DRIVER_NAME": not support stop cmd\n"); - cmd->error = sh_mmcif_error_manage(host); + break; + default: + dev_err(&host->pd->dev, "unsupported stop cmd\n"); + mrq->stop->error = sh_mmcif_error_manage(host); return; } - time = wait_event_interruptible_timeout(host->intr_wait, - host->wait_int == 1 || - host->sd_error == 1, host->timeout); - if (host->wait_int != 1 && (time == 0 || host->sd_error != 0)) { - cmd->error = sh_mmcif_error_manage(host); - return; - } - sh_mmcif_get_cmd12response(host, cmd); - host->wait_int = 0; - cmd->error = 0; + host->wait_for = MMCIF_WAIT_FOR_STOP; } static void sh_mmcif_request(struct mmc_host *mmc, struct mmc_request *mrq) { struct sh_mmcif_host *host = mmc_priv(mmc); + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + if (host->state != STATE_IDLE) { + dev_dbg(&host->pd->dev, "%s() rejected, state %u\n", __func__, host->state); + spin_unlock_irqrestore(&host->lock, flags); + mrq->cmd->error = -EAGAIN; + mmc_request_done(mmc, mrq); + return; + } + + host->state = STATE_REQUEST; + spin_unlock_irqrestore(&host->lock, flags); switch (mrq->cmd->opcode) { /* MMCIF does not support SD/SDIO command */ - case SD_IO_SEND_OP_COND: + case MMC_SLEEP_AWAKE: /* = SD_IO_SEND_OP_COND (5) */ + case MMC_SEND_EXT_CSD: /* = SD_SEND_IF_COND (8) */ + if ((mrq->cmd->flags & MMC_CMD_MASK) != MMC_CMD_BCR) + break; case MMC_APP_CMD: + case SD_IO_RW_DIRECT: + host->state = STATE_IDLE; mrq->cmd->error = -ETIMEDOUT; mmc_request_done(mmc, mrq); return; - case MMC_SEND_EXT_CSD: /* = SD_SEND_IF_COND (8) */ - if (!mrq->data) { - /* send_if_cond cmd (not support) */ - mrq->cmd->error = -ETIMEDOUT; - mmc_request_done(mmc, mrq); - return; - } - break; default: break; } - host->data = mrq->data; - sh_mmcif_start_cmd(host, mrq, mrq->cmd); - host->data = NULL; - if (mrq->cmd->error != 0) { - mmc_request_done(mmc, mrq); - return; + host->mrq = mrq; + + sh_mmcif_start_cmd(host, mrq); +} + +static int sh_mmcif_clk_update(struct sh_mmcif_host *host) +{ + int ret = clk_prepare_enable(host->hclk); + + if (!ret) { + host->clk = clk_get_rate(host->hclk); + host->mmc->f_max = host->clk / 2; + host->mmc->f_min = host->clk / 512; } - if (mrq->stop) - sh_mmcif_stop_cmd(host, mrq, mrq->stop); - mmc_request_done(mmc, mrq); + + return ret; +} + +static void sh_mmcif_set_power(struct sh_mmcif_host *host, struct mmc_ios *ios) +{ + struct mmc_host *mmc = host->mmc; + + if (!IS_ERR(mmc->supply.vmmc)) + /* Errors ignored... */ + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, + ios->power_mode ? ios->vdd : 0); } static void sh_mmcif_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) { struct sh_mmcif_host *host = mmc_priv(mmc); - struct sh_mmcif_plat_data *p = host->pd->dev.platform_data; + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + if (host->state != STATE_IDLE) { + dev_dbg(&host->pd->dev, "%s() rejected, state %u\n", __func__, host->state); + spin_unlock_irqrestore(&host->lock, flags); + return; + } + + host->state = STATE_IOS; + spin_unlock_irqrestore(&host->lock, flags); - if (ios->power_mode == MMC_POWER_OFF) { + if (ios->power_mode == MMC_POWER_UP) { + if (!host->card_present) { + /* See if we also get DMA */ + sh_mmcif_request_dma(host, host->pd->dev.platform_data); + host->card_present = true; + } + sh_mmcif_set_power(host, ios); + } else if (ios->power_mode == MMC_POWER_OFF || !ios->clock) { /* clock stop */ sh_mmcif_clock_control(host, 0); - if (p->down_pwr) - p->down_pwr(host->pd); + if (ios->power_mode == MMC_POWER_OFF) { + if (host->card_present) { + sh_mmcif_release_dma(host); + host->card_present = false; + } + } + if (host->power) { + pm_runtime_put_sync(&host->pd->dev); + clk_disable_unprepare(host->hclk); + host->power = false; + if (ios->power_mode == MMC_POWER_OFF) + sh_mmcif_set_power(host, ios); + } + host->state = STATE_IDLE; return; - } else if (ios->power_mode == MMC_POWER_UP) { - if (p->set_pwr) - p->set_pwr(host->pd, ios->power_mode); } - if (ios->clock) + if (ios->clock) { + if (!host->power) { + sh_mmcif_clk_update(host); + pm_runtime_get_sync(&host->pd->dev); + host->power = true; + sh_mmcif_sync_reset(host); + } sh_mmcif_clock_control(host, ios->clock); + } + host->timing = ios->timing; host->bus_width = ios->bus_width; + host->state = STATE_IDLE; } static int sh_mmcif_get_cd(struct mmc_host *mmc) { struct sh_mmcif_host *host = mmc_priv(mmc); struct sh_mmcif_plat_data *p = host->pd->dev.platform_data; + int ret = mmc_gpio_get_cd(mmc); + + if (ret >= 0) + return ret; - if (!p->get_cd) + if (!p || !p->get_cd) return -ENOSYS; else return p->get_cd(host->pd); @@ -727,82 +1066,316 @@ static struct mmc_host_ops sh_mmcif_ops = { .get_cd = sh_mmcif_get_cd, }; -static void sh_mmcif_detect(struct mmc_host *mmc) +static bool sh_mmcif_end_cmd(struct sh_mmcif_host *host) { - mmc_detect_change(mmc, 0); + struct mmc_command *cmd = host->mrq->cmd; + struct mmc_data *data = host->mrq->data; + long time; + + if (host->sd_error) { + switch (cmd->opcode) { + case MMC_ALL_SEND_CID: + case MMC_SELECT_CARD: + case MMC_APP_CMD: + cmd->error = -ETIMEDOUT; + break; + default: + cmd->error = sh_mmcif_error_manage(host); + break; + } + dev_dbg(&host->pd->dev, "CMD%d error %d\n", + cmd->opcode, cmd->error); + host->sd_error = false; + return false; + } + if (!(cmd->flags & MMC_RSP_PRESENT)) { + cmd->error = 0; + return false; + } + + sh_mmcif_get_response(host, cmd); + + if (!data) + return false; + + /* + * Completion can be signalled from DMA callback and error, so, have to + * reset here, before setting .dma_active + */ + init_completion(&host->dma_complete); + + if (data->flags & MMC_DATA_READ) { + if (host->chan_rx) + sh_mmcif_start_dma_rx(host); + } else { + if (host->chan_tx) + sh_mmcif_start_dma_tx(host); + } + + if (!host->dma_active) { + data->error = sh_mmcif_data_trans(host, host->mrq, cmd->opcode); + return !data->error; + } + + /* Running in the IRQ thread, can sleep */ + time = wait_for_completion_interruptible_timeout(&host->dma_complete, + host->timeout); + + if (data->flags & MMC_DATA_READ) + dma_unmap_sg(host->chan_rx->device->dev, + data->sg, data->sg_len, + DMA_FROM_DEVICE); + else + dma_unmap_sg(host->chan_tx->device->dev, + data->sg, data->sg_len, + DMA_TO_DEVICE); + + if (host->sd_error) { + dev_err(host->mmc->parent, + "Error IRQ while waiting for DMA completion!\n"); + /* Woken up by an error IRQ: abort DMA */ + data->error = sh_mmcif_error_manage(host); + } else if (!time) { + dev_err(host->mmc->parent, "DMA timeout!\n"); + data->error = -ETIMEDOUT; + } else if (time < 0) { + dev_err(host->mmc->parent, + "wait_for_completion_...() error %ld!\n", time); + data->error = time; + } + sh_mmcif_bitclr(host, MMCIF_CE_BUF_ACC, + BUF_ACC_DMAREN | BUF_ACC_DMAWEN); + host->dma_active = false; + + if (data->error) { + data->bytes_xfered = 0; + /* Abort DMA */ + if (data->flags & MMC_DATA_READ) + dmaengine_terminate_all(host->chan_rx); + else + dmaengine_terminate_all(host->chan_tx); + } + + return false; +} + +static irqreturn_t sh_mmcif_irqt(int irq, void *dev_id) +{ + struct sh_mmcif_host *host = dev_id; + struct mmc_request *mrq; + bool wait = false; + + cancel_delayed_work_sync(&host->timeout_work); + + mutex_lock(&host->thread_lock); + + mrq = host->mrq; + if (!mrq) { + dev_dbg(&host->pd->dev, "IRQ thread state %u, wait %u: NULL mrq!\n", + host->state, host->wait_for); + mutex_unlock(&host->thread_lock); + return IRQ_HANDLED; + } + + /* + * All handlers return true, if processing continues, and false, if the + * request has to be completed - successfully or not + */ + switch (host->wait_for) { + case MMCIF_WAIT_FOR_REQUEST: + /* We're too late, the timeout has already kicked in */ + mutex_unlock(&host->thread_lock); + return IRQ_HANDLED; + case MMCIF_WAIT_FOR_CMD: + /* Wait for data? */ + wait = sh_mmcif_end_cmd(host); + break; + case MMCIF_WAIT_FOR_MREAD: + /* Wait for more data? */ + wait = sh_mmcif_mread_block(host); + break; + case MMCIF_WAIT_FOR_READ: + /* Wait for data end? */ + wait = sh_mmcif_read_block(host); + break; + case MMCIF_WAIT_FOR_MWRITE: + /* Wait data to write? */ + wait = sh_mmcif_mwrite_block(host); + break; + case MMCIF_WAIT_FOR_WRITE: + /* Wait for data end? */ + wait = sh_mmcif_write_block(host); + break; + case MMCIF_WAIT_FOR_STOP: + if (host->sd_error) { + mrq->stop->error = sh_mmcif_error_manage(host); + dev_dbg(&host->pd->dev, "%s(): %d\n", __func__, mrq->stop->error); + break; + } + sh_mmcif_get_cmd12response(host, mrq->stop); + mrq->stop->error = 0; + break; + case MMCIF_WAIT_FOR_READ_END: + case MMCIF_WAIT_FOR_WRITE_END: + if (host->sd_error) { + mrq->data->error = sh_mmcif_error_manage(host); + dev_dbg(&host->pd->dev, "%s(): %d\n", __func__, mrq->data->error); + } + break; + default: + BUG(); + } + + if (wait) { + schedule_delayed_work(&host->timeout_work, host->timeout); + /* Wait for more data */ + mutex_unlock(&host->thread_lock); + return IRQ_HANDLED; + } + + if (host->wait_for != MMCIF_WAIT_FOR_STOP) { + struct mmc_data *data = mrq->data; + if (!mrq->cmd->error && data && !data->error) + data->bytes_xfered = + data->blocks * data->blksz; + + if (mrq->stop && !mrq->cmd->error && (!data || !data->error)) { + sh_mmcif_stop_cmd(host, mrq); + if (!mrq->stop->error) { + schedule_delayed_work(&host->timeout_work, host->timeout); + mutex_unlock(&host->thread_lock); + return IRQ_HANDLED; + } + } + } + + host->wait_for = MMCIF_WAIT_FOR_REQUEST; + host->state = STATE_IDLE; + host->mrq = NULL; + mmc_request_done(host->mmc, mrq); + + mutex_unlock(&host->thread_lock); + + return IRQ_HANDLED; } static irqreturn_t sh_mmcif_intr(int irq, void *dev_id) { struct sh_mmcif_host *host = dev_id; - u32 state = 0; - int err = 0; + u32 state, mask; state = sh_mmcif_readl(host->addr, MMCIF_CE_INT); + mask = sh_mmcif_readl(host->addr, MMCIF_CE_INT_MASK); + if (host->ccs_enable) + sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~(state & mask)); + else + sh_mmcif_writel(host->addr, MMCIF_CE_INT, INT_CCS | ~(state & mask)); + sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, state & MASK_CLEAN); - if (state & INT_RBSYE) { - sh_mmcif_writel(host->addr, MMCIF_CE_INT, - ~(INT_RBSYE | INT_CRSPE)); - sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MRBSYE); - } else if (state & INT_CRSPE) { - sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_CRSPE); - sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MCRSPE); - } else if (state & INT_BUFREN) { - sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_BUFREN); - sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MBUFREN); - } else if (state & INT_BUFWEN) { - sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_BUFWEN); - sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MBUFWEN); - } else if (state & INT_CMD12DRE) { - sh_mmcif_writel(host->addr, MMCIF_CE_INT, - ~(INT_CMD12DRE | INT_CMD12RBE | - INT_CMD12CRE | INT_BUFRE)); - sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MCMD12DRE); - } else if (state & INT_BUFRE) { - sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_BUFRE); - sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MBUFRE); - } else if (state & INT_DTRANE) { - sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_DTRANE); - sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MDTRANE); - } else if (state & INT_CMD12RBE) { - sh_mmcif_writel(host->addr, MMCIF_CE_INT, - ~(INT_CMD12RBE | INT_CMD12CRE)); - sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MCMD12RBE); - } else if (state & INT_ERR_STS) { - /* err interrupts */ - sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~state); - sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, state); - err = 1; - } else { - pr_debug("%s: Not support int\n", DRIVER_NAME); - sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~state); - sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, state); - err = 1; + if (state & ~MASK_CLEAN) + dev_dbg(&host->pd->dev, "IRQ state = 0x%08x incompletely cleared\n", + state); + + if (state & INT_ERR_STS || state & ~INT_ALL) { + host->sd_error = true; + dev_dbg(&host->pd->dev, "int err state = 0x%08x\n", state); } - if (err) { - host->sd_error = 1; - pr_debug("%s: int err state = %08x\n", DRIVER_NAME, state); + if (state & ~(INT_CMD12RBE | INT_CMD12CRE)) { + if (!host->mrq) + dev_dbg(&host->pd->dev, "NULL IRQ state = 0x%08x\n", state); + if (!host->dma_active) + return IRQ_WAKE_THREAD; + else if (host->sd_error) + mmcif_dma_complete(host); + } else { + dev_dbg(&host->pd->dev, "Unexpected IRQ 0x%x\n", state); } - host->wait_int = 1; - wake_up(&host->intr_wait); return IRQ_HANDLED; } -static int __devinit sh_mmcif_probe(struct platform_device *pdev) +static void mmcif_timeout_work(struct work_struct *work) +{ + struct delayed_work *d = container_of(work, struct delayed_work, work); + struct sh_mmcif_host *host = container_of(d, struct sh_mmcif_host, timeout_work); + struct mmc_request *mrq = host->mrq; + unsigned long flags; + + if (host->dying) + /* Don't run after mmc_remove_host() */ + return; + + dev_err(&host->pd->dev, "Timeout waiting for %u on CMD%u\n", + host->wait_for, mrq->cmd->opcode); + + spin_lock_irqsave(&host->lock, flags); + if (host->state == STATE_IDLE) { + spin_unlock_irqrestore(&host->lock, flags); + return; + } + + host->state = STATE_TIMEOUT; + spin_unlock_irqrestore(&host->lock, flags); + + /* + * Handle races with cancel_delayed_work(), unless + * cancel_delayed_work_sync() is used + */ + switch (host->wait_for) { + case MMCIF_WAIT_FOR_CMD: + mrq->cmd->error = sh_mmcif_error_manage(host); + break; + case MMCIF_WAIT_FOR_STOP: + mrq->stop->error = sh_mmcif_error_manage(host); + break; + case MMCIF_WAIT_FOR_MREAD: + case MMCIF_WAIT_FOR_MWRITE: + case MMCIF_WAIT_FOR_READ: + case MMCIF_WAIT_FOR_WRITE: + case MMCIF_WAIT_FOR_READ_END: + case MMCIF_WAIT_FOR_WRITE_END: + mrq->data->error = sh_mmcif_error_manage(host); + break; + default: + BUG(); + } + + host->state = STATE_IDLE; + host->wait_for = MMCIF_WAIT_FOR_REQUEST; + host->mrq = NULL; + mmc_request_done(host->mmc, mrq); +} + +static void sh_mmcif_init_ocr(struct sh_mmcif_host *host) +{ + struct sh_mmcif_plat_data *pd = host->pd->dev.platform_data; + struct mmc_host *mmc = host->mmc; + + mmc_regulator_get_supply(mmc); + + if (!pd) + return; + + if (!mmc->ocr_avail) + mmc->ocr_avail = pd->ocr; + else if (pd->ocr) + dev_warn(mmc_dev(mmc), "Platform OCR mask is ignored\n"); +} + +static int sh_mmcif_probe(struct platform_device *pdev) { int ret = 0, irq[2]; struct mmc_host *mmc; - struct sh_mmcif_host *host = NULL; - struct sh_mmcif_plat_data *pd = NULL; + struct sh_mmcif_host *host; + struct sh_mmcif_plat_data *pd = pdev->dev.platform_data; struct resource *res; void __iomem *reg; - char clk_name[8]; + const char *name; irq[0] = platform_get_irq(pdev, 0); irq[1] = platform_get_irq(pdev, 1); - if (irq[0] < 0 || irq[1] < 0) { - pr_err(DRIVER_NAME": Get irq error\n"); + if (irq[0] < 0) { + dev_err(&pdev->dev, "Get irq error\n"); return -ENXIO; } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -815,137 +1388,199 @@ static int __devinit sh_mmcif_probe(struct platform_device *pdev) dev_err(&pdev->dev, "ioremap error.\n"); return -ENOMEM; } - pd = (struct sh_mmcif_plat_data *)(pdev->dev.platform_data); - if (!pd) { - dev_err(&pdev->dev, "sh_mmcif plat data error.\n"); - ret = -ENXIO; - goto clean_up; - } + mmc = mmc_alloc_host(sizeof(struct sh_mmcif_host), &pdev->dev); if (!mmc) { ret = -ENOMEM; - goto clean_up; + goto ealloch; } + + ret = mmc_of_parse(mmc); + if (ret < 0) + goto eofparse; + host = mmc_priv(mmc); host->mmc = mmc; host->addr = reg; - host->timeout = 1000; + host->timeout = msecs_to_jiffies(1000); + host->ccs_enable = !pd || !pd->ccs_unsupported; + host->clk_ctrl2_enable = pd && pd->clk_ctrl2_present; - snprintf(clk_name, sizeof(clk_name), "mmc%d", pdev->id); - host->hclk = clk_get(&pdev->dev, clk_name); - if (IS_ERR(host->hclk)) { - dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name); - ret = PTR_ERR(host->hclk); - goto clean_up1; - } - clk_enable(host->hclk); - host->clk = clk_get_rate(host->hclk); host->pd = pdev; - init_waitqueue_head(&host->intr_wait); + spin_lock_init(&host->lock); mmc->ops = &sh_mmcif_ops; - mmc->f_max = host->clk; - /* close to 400KHz */ - if (mmc->f_max < 51200000) - mmc->f_min = mmc->f_max / 128; - else if (mmc->f_max < 102400000) - mmc->f_min = mmc->f_max / 256; - else - mmc->f_min = mmc->f_max / 512; - if (pd->ocr) - mmc->ocr_avail = pd->ocr; - mmc->caps = MMC_CAP_MMC_HIGHSPEED; - if (pd->caps) + sh_mmcif_init_ocr(host); + + mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_WAIT_WHILE_BUSY; + if (pd && pd->caps) mmc->caps |= pd->caps; - mmc->max_segs = 128; + mmc->max_segs = 32; mmc->max_blk_size = 512; - mmc->max_blk_count = 65535; - mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; + mmc->max_req_size = PAGE_CACHE_SIZE * mmc->max_segs; + mmc->max_blk_count = mmc->max_req_size / mmc->max_blk_size; mmc->max_seg_size = mmc->max_req_size; - sh_mmcif_sync_reset(host); platform_set_drvdata(pdev, host); - mmc_add_host(mmc); - ret = request_irq(irq[0], sh_mmcif_intr, 0, "sh_mmc:error", host); - if (ret) { - pr_err(DRIVER_NAME": request_irq error (sh_mmc:error)\n"); - goto clean_up2; + pm_runtime_enable(&pdev->dev); + host->power = false; + + host->hclk = clk_get(&pdev->dev, NULL); + if (IS_ERR(host->hclk)) { + ret = PTR_ERR(host->hclk); + dev_err(&pdev->dev, "cannot get clock: %d\n", ret); + goto eclkget; } - ret = request_irq(irq[1], sh_mmcif_intr, 0, "sh_mmc:int", host); + ret = sh_mmcif_clk_update(host); + if (ret < 0) + goto eclkupdate; + + ret = pm_runtime_resume(&pdev->dev); + if (ret < 0) + goto eresume; + + INIT_DELAYED_WORK(&host->timeout_work, mmcif_timeout_work); + + sh_mmcif_sync_reset(host); + sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL); + + name = irq[1] < 0 ? dev_name(&pdev->dev) : "sh_mmc:error"; + ret = request_threaded_irq(irq[0], sh_mmcif_intr, sh_mmcif_irqt, 0, name, host); if (ret) { - free_irq(irq[0], host); - pr_err(DRIVER_NAME": request_irq error (sh_mmc:int)\n"); - goto clean_up2; + dev_err(&pdev->dev, "request_irq error (%s)\n", name); + goto ereqirq0; + } + if (irq[1] >= 0) { + ret = request_threaded_irq(irq[1], sh_mmcif_intr, sh_mmcif_irqt, + 0, "sh_mmc:int", host); + if (ret) { + dev_err(&pdev->dev, "request_irq error (sh_mmc:int)\n"); + goto ereqirq1; + } } - sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL); - sh_mmcif_detect(host->mmc); + if (pd && pd->use_cd_gpio) { + ret = mmc_gpio_request_cd(mmc, pd->cd_gpio, 0); + if (ret < 0) + goto erqcd; + } + + mutex_init(&host->thread_lock); - pr_info("%s: driver version %s\n", DRIVER_NAME, DRIVER_VERSION); - pr_debug("%s: chip ver H'%04x\n", DRIVER_NAME, + clk_disable_unprepare(host->hclk); + ret = mmc_add_host(mmc); + if (ret < 0) + goto emmcaddh; + + dev_pm_qos_expose_latency_limit(&pdev->dev, 100); + + dev_info(&pdev->dev, "driver version %s\n", DRIVER_VERSION); + dev_dbg(&pdev->dev, "chip ver H'%04x\n", sh_mmcif_readl(host->addr, MMCIF_CE_VERSION) & 0x0000ffff); return ret; -clean_up2: - clk_disable(host->hclk); -clean_up1: +emmcaddh: +erqcd: + if (irq[1] >= 0) + free_irq(irq[1], host); +ereqirq1: + free_irq(irq[0], host); +ereqirq0: + pm_runtime_suspend(&pdev->dev); +eresume: + clk_disable_unprepare(host->hclk); +eclkupdate: + clk_put(host->hclk); +eclkget: + pm_runtime_disable(&pdev->dev); +eofparse: mmc_free_host(mmc); -clean_up: - if (reg) - iounmap(reg); +ealloch: + iounmap(reg); return ret; } -static int __devexit sh_mmcif_remove(struct platform_device *pdev) +static int sh_mmcif_remove(struct platform_device *pdev) { struct sh_mmcif_host *host = platform_get_drvdata(pdev); int irq[2]; + host->dying = true; + clk_prepare_enable(host->hclk); + pm_runtime_get_sync(&pdev->dev); + + dev_pm_qos_hide_latency_limit(&pdev->dev); + + mmc_remove_host(host->mmc); sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL); - irq[0] = platform_get_irq(pdev, 0); - irq[1] = platform_get_irq(pdev, 1); + /* + * FIXME: cancel_delayed_work(_sync)() and free_irq() race with the + * mmc_remove_host() call above. But swapping order doesn't help either + * (a query on the linux-mmc mailing list didn't bring any replies). + */ + cancel_delayed_work_sync(&host->timeout_work); if (host->addr) iounmap(host->addr); - platform_set_drvdata(pdev, NULL); - mmc_remove_host(host->mmc); + irq[0] = platform_get_irq(pdev, 0); + irq[1] = platform_get_irq(pdev, 1); free_irq(irq[0], host); - free_irq(irq[1], host); + if (irq[1] >= 0) + free_irq(irq[1], host); - clk_disable(host->hclk); + clk_disable_unprepare(host->hclk); mmc_free_host(host->mmc); + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int sh_mmcif_suspend(struct device *dev) +{ + struct sh_mmcif_host *host = dev_get_drvdata(dev); + + sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL); + + return 0; +} +static int sh_mmcif_resume(struct device *dev) +{ return 0; } +#endif + +static const struct of_device_id mmcif_of_match[] = { + { .compatible = "renesas,sh-mmcif" }, + { } +}; +MODULE_DEVICE_TABLE(of, mmcif_of_match); + +static const struct dev_pm_ops sh_mmcif_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(sh_mmcif_suspend, sh_mmcif_resume) +}; static struct platform_driver sh_mmcif_driver = { .probe = sh_mmcif_probe, .remove = sh_mmcif_remove, .driver = { .name = DRIVER_NAME, + .pm = &sh_mmcif_dev_pm_ops, + .owner = THIS_MODULE, + .of_match_table = mmcif_of_match, }, }; -static int __init sh_mmcif_init(void) -{ - return platform_driver_register(&sh_mmcif_driver); -} - -static void __exit sh_mmcif_exit(void) -{ - platform_driver_unregister(&sh_mmcif_driver); -} - -module_init(sh_mmcif_init); -module_exit(sh_mmcif_exit); - +module_platform_driver(sh_mmcif_driver); MODULE_DESCRIPTION("SuperH on-chip MMC/eMMC interface driver"); MODULE_LICENSE("GPL"); -MODULE_ALIAS(DRIVER_NAME); +MODULE_ALIAS("platform:" DRIVER_NAME); MODULE_AUTHOR("Yusuke Goda <yusuke.goda.sx@renesas.com>"); diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c new file mode 100644 index 00000000000..91058dabd11 --- /dev/null +++ b/drivers/mmc/host/sh_mobile_sdhi.c @@ -0,0 +1,357 @@ +/* + * SuperH Mobile SDHI + * + * Copyright (C) 2009 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Based on "Compaq ASIC3 support": + * + * Copyright 2001 Compaq Computer Corporation. + * Copyright 2004-2005 Phil Blundell + * Copyright 2007-2008 OpenedHand Ltd. + * + * Authors: Phil Blundell <pb@handhelds.org>, + * Samuel Ortiz <sameo@openedhand.com> + * + */ + +#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/slab.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/mmc/host.h> +#include <linux/mmc/sh_mobile_sdhi.h> +#include <linux/mfd/tmio.h> +#include <linux/sh_dma.h> +#include <linux/delay.h> + +#include "tmio_mmc.h" + +#define EXT_ACC 0xe4 + +struct sh_mobile_sdhi_of_data { + unsigned long tmio_flags; + unsigned long capabilities; + unsigned long capabilities2; +}; + +static const struct sh_mobile_sdhi_of_data sh_mobile_sdhi_of_cfg[] = { + { + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, + }, +}; + +static const struct sh_mobile_sdhi_of_data of_rcar_gen1_compatible = { + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE, + .capabilities = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ, +}; + +static const struct sh_mobile_sdhi_of_data of_rcar_gen2_compatible = { + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE, + .capabilities = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ, + .capabilities2 = MMC_CAP2_NO_MULTI_READ, +}; + +static const struct of_device_id sh_mobile_sdhi_of_match[] = { + { .compatible = "renesas,sdhi-shmobile" }, + { .compatible = "renesas,sdhi-sh7372" }, + { .compatible = "renesas,sdhi-sh73a0", .data = &sh_mobile_sdhi_of_cfg[0], }, + { .compatible = "renesas,sdhi-r8a73a4", .data = &sh_mobile_sdhi_of_cfg[0], }, + { .compatible = "renesas,sdhi-r8a7740", .data = &sh_mobile_sdhi_of_cfg[0], }, + { .compatible = "renesas,sdhi-r8a7778", .data = &of_rcar_gen1_compatible, }, + { .compatible = "renesas,sdhi-r8a7779", .data = &of_rcar_gen1_compatible, }, + { .compatible = "renesas,sdhi-r8a7790", .data = &of_rcar_gen2_compatible, }, + { .compatible = "renesas,sdhi-r8a7791", .data = &of_rcar_gen2_compatible, }, + {}, +}; +MODULE_DEVICE_TABLE(of, sh_mobile_sdhi_of_match); + +struct sh_mobile_sdhi { + struct clk *clk; + struct tmio_mmc_data mmc_data; + struct tmio_mmc_dma dma_priv; +}; + +static int sh_mobile_sdhi_clk_enable(struct platform_device *pdev, unsigned int *f) +{ + struct mmc_host *mmc = platform_get_drvdata(pdev); + struct tmio_mmc_host *host = mmc_priv(mmc); + struct sh_mobile_sdhi *priv = container_of(host->pdata, struct sh_mobile_sdhi, mmc_data); + int ret = clk_prepare_enable(priv->clk); + if (ret < 0) + return ret; + + *f = clk_get_rate(priv->clk); + return 0; +} + +static void sh_mobile_sdhi_clk_disable(struct platform_device *pdev) +{ + struct mmc_host *mmc = platform_get_drvdata(pdev); + struct tmio_mmc_host *host = mmc_priv(mmc); + struct sh_mobile_sdhi *priv = container_of(host->pdata, struct sh_mobile_sdhi, mmc_data); + clk_disable_unprepare(priv->clk); +} + +static int sh_mobile_sdhi_wait_idle(struct tmio_mmc_host *host) +{ + int timeout = 1000; + + while (--timeout && !(sd_ctrl_read16(host, CTL_STATUS2) & (1 << 13))) + udelay(1); + + if (!timeout) { + dev_warn(host->pdata->dev, "timeout waiting for SD bus idle\n"); + return -EBUSY; + } + + return 0; +} + +static int sh_mobile_sdhi_write16_hook(struct tmio_mmc_host *host, int addr) +{ + switch (addr) + { + case CTL_SD_CMD: + case CTL_STOP_INTERNAL_ACTION: + case CTL_XFER_BLK_COUNT: + case CTL_SD_CARD_CLK_CTL: + case CTL_SD_XFER_LEN: + case CTL_SD_MEM_CARD_OPT: + case CTL_TRANSACTION_CTL: + case CTL_DMA_ENABLE: + return sh_mobile_sdhi_wait_idle(host); + } + + return 0; +} + +static void sh_mobile_sdhi_cd_wakeup(const struct platform_device *pdev) +{ + mmc_detect_change(platform_get_drvdata(pdev), msecs_to_jiffies(100)); +} + +static const struct sh_mobile_sdhi_ops sdhi_ops = { + .cd_wakeup = sh_mobile_sdhi_cd_wakeup, +}; + +static int sh_mobile_sdhi_probe(struct platform_device *pdev) +{ + const struct of_device_id *of_id = + of_match_device(sh_mobile_sdhi_of_match, &pdev->dev); + struct sh_mobile_sdhi *priv; + struct tmio_mmc_data *mmc_data; + struct sh_mobile_sdhi_info *p = pdev->dev.platform_data; + struct tmio_mmc_host *host; + struct resource *res; + int irq, ret, i = 0; + bool multiplexed_isr = true; + struct tmio_mmc_dma *dma_priv; + u16 ver; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; + + priv = devm_kzalloc(&pdev->dev, sizeof(struct sh_mobile_sdhi), GFP_KERNEL); + if (priv == NULL) { + dev_err(&pdev->dev, "kzalloc failed\n"); + return -ENOMEM; + } + + mmc_data = &priv->mmc_data; + dma_priv = &priv->dma_priv; + + if (p) { + if (p->init) { + ret = p->init(pdev, &sdhi_ops); + if (ret) + return ret; + } + } + + priv->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(priv->clk)) { + ret = PTR_ERR(priv->clk); + dev_err(&pdev->dev, "cannot get clock: %d\n", ret); + goto eclkget; + } + + mmc_data->clk_enable = sh_mobile_sdhi_clk_enable; + mmc_data->clk_disable = sh_mobile_sdhi_clk_disable; + mmc_data->capabilities = MMC_CAP_MMC_HIGHSPEED; + mmc_data->write16_hook = sh_mobile_sdhi_write16_hook; + if (p) { + mmc_data->flags = p->tmio_flags; + mmc_data->ocr_mask = p->tmio_ocr_mask; + mmc_data->capabilities |= p->tmio_caps; + mmc_data->capabilities2 |= p->tmio_caps2; + mmc_data->cd_gpio = p->cd_gpio; + + if (p->dma_slave_tx > 0 && p->dma_slave_rx > 0) { + /* + * Yes, we have to provide slave IDs twice to TMIO: + * once as a filter parameter and once for channel + * configuration as an explicit slave ID + */ + dma_priv->chan_priv_tx = (void *)p->dma_slave_tx; + dma_priv->chan_priv_rx = (void *)p->dma_slave_rx; + dma_priv->slave_id_tx = p->dma_slave_tx; + dma_priv->slave_id_rx = p->dma_slave_rx; + } + } + + dma_priv->alignment_shift = 1; /* 2-byte alignment */ + dma_priv->filter = shdma_chan_filter; + + mmc_data->dma = dma_priv; + + /* + * All SDHI blocks support 2-byte and larger block sizes in 4-bit + * bus width mode. + */ + mmc_data->flags |= TMIO_MMC_BLKSZ_2BYTES; + + /* + * All SDHI blocks support SDIO IRQ signalling. + */ + mmc_data->flags |= TMIO_MMC_SDIO_IRQ; + + if (of_id && of_id->data) { + const struct sh_mobile_sdhi_of_data *of_data = of_id->data; + mmc_data->flags |= of_data->tmio_flags; + mmc_data->capabilities |= of_data->capabilities; + mmc_data->capabilities2 |= of_data->capabilities2; + } + + /* SD control register space size is 0x100, 0x200 for bus_shift=1 */ + mmc_data->bus_shift = resource_size(res) >> 9; + + ret = tmio_mmc_host_probe(&host, pdev, mmc_data); + if (ret < 0) + goto eprobe; + + /* + * FIXME: + * this Workaround can be more clever method + */ + ver = sd_ctrl_read16(host, CTL_VERSION); + if (ver == 0xCB0D) + sd_ctrl_write16(host, EXT_ACC, 1); + + /* + * Allow one or more specific (named) ISRs or + * one or more multiplexed (un-named) ISRs. + */ + + irq = platform_get_irq_byname(pdev, SH_MOBILE_SDHI_IRQ_CARD_DETECT); + if (irq >= 0) { + multiplexed_isr = false; + ret = devm_request_irq(&pdev->dev, irq, tmio_mmc_card_detect_irq, 0, + dev_name(&pdev->dev), host); + if (ret) + goto eirq; + } + + irq = platform_get_irq_byname(pdev, SH_MOBILE_SDHI_IRQ_SDIO); + if (irq >= 0) { + multiplexed_isr = false; + ret = devm_request_irq(&pdev->dev, irq, tmio_mmc_sdio_irq, 0, + dev_name(&pdev->dev), host); + if (ret) + goto eirq; + } + + irq = platform_get_irq_byname(pdev, SH_MOBILE_SDHI_IRQ_SDCARD); + if (irq >= 0) { + multiplexed_isr = false; + ret = devm_request_irq(&pdev->dev, irq, tmio_mmc_sdcard_irq, 0, + dev_name(&pdev->dev), host); + if (ret) + goto eirq; + } else if (!multiplexed_isr) { + dev_err(&pdev->dev, + "Principal SD-card IRQ is missing among named interrupts\n"); + ret = irq; + goto eirq; + } + + if (multiplexed_isr) { + while (1) { + irq = platform_get_irq(pdev, i); + if (irq < 0) + break; + i++; + ret = devm_request_irq(&pdev->dev, irq, tmio_mmc_irq, 0, + dev_name(&pdev->dev), host); + if (ret) + goto eirq; + } + + /* There must be at least one IRQ source */ + if (!i) { + ret = irq; + goto eirq; + } + } + + dev_info(&pdev->dev, "%s base at 0x%08lx clock rate %u MHz\n", + mmc_hostname(host->mmc), (unsigned long) + (platform_get_resource(pdev, IORESOURCE_MEM, 0)->start), + host->mmc->f_max / 1000000); + + return ret; + +eirq: + tmio_mmc_host_remove(host); +eprobe: +eclkget: + if (p && p->cleanup) + p->cleanup(pdev); + return ret; +} + +static int sh_mobile_sdhi_remove(struct platform_device *pdev) +{ + struct mmc_host *mmc = platform_get_drvdata(pdev); + struct tmio_mmc_host *host = mmc_priv(mmc); + struct sh_mobile_sdhi_info *p = pdev->dev.platform_data; + + tmio_mmc_host_remove(host); + + if (p && p->cleanup) + p->cleanup(pdev); + + return 0; +} + +static const struct dev_pm_ops tmio_mmc_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(tmio_mmc_host_suspend, tmio_mmc_host_resume) + SET_RUNTIME_PM_OPS(tmio_mmc_host_runtime_suspend, + tmio_mmc_host_runtime_resume, + NULL) +}; + +static struct platform_driver sh_mobile_sdhi_driver = { + .driver = { + .name = "sh_mobile_sdhi", + .owner = THIS_MODULE, + .pm = &tmio_mmc_dev_pm_ops, + .of_match_table = sh_mobile_sdhi_of_match, + }, + .probe = sh_mobile_sdhi_probe, + .remove = sh_mobile_sdhi_remove, +}; + +module_platform_driver(sh_mobile_sdhi_driver); + +MODULE_DESCRIPTION("SuperH Mobile SDHI driver"); +MODULE_AUTHOR("Magnus Damm"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:sh_mobile_sdhi"); diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c new file mode 100644 index 00000000000..024f67c98cd --- /dev/null +++ b/drivers/mmc/host/sunxi-mmc.c @@ -0,0 +1,1049 @@ +/* + * Driver for sunxi SD/MMC host controllers + * (C) Copyright 2007-2011 Reuuimlla Technology Co., Ltd. + * (C) Copyright 2007-2011 Aaron Maoye <leafy.myeh@reuuimllatech.com> + * (C) Copyright 2013-2014 O2S GmbH <www.o2s.ch> + * (C) Copyright 2013-2014 David Lanzend�rfer <david.lanzendoerfer@o2s.ch> + * (C) Copyright 2013-2014 Hans de Goede <hdegoede@redhat.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/err.h> + +#include <linux/clk.h> +#include <linux/clk-private.h> +#include <linux/clk/sunxi.h> + +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/scatterlist.h> +#include <linux/dma-mapping.h> +#include <linux/slab.h> +#include <linux/reset.h> + +#include <linux/of_address.h> +#include <linux/of_gpio.h> +#include <linux/of_platform.h> + +#include <linux/mmc/host.h> +#include <linux/mmc/sd.h> +#include <linux/mmc/sdio.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/core.h> +#include <linux/mmc/card.h> +#include <linux/mmc/slot-gpio.h> + +/* register offset definitions */ +#define SDXC_REG_GCTRL (0x00) /* SMC Global Control Register */ +#define SDXC_REG_CLKCR (0x04) /* SMC Clock Control Register */ +#define SDXC_REG_TMOUT (0x08) /* SMC Time Out Register */ +#define SDXC_REG_WIDTH (0x0C) /* SMC Bus Width Register */ +#define SDXC_REG_BLKSZ (0x10) /* SMC Block Size Register */ +#define SDXC_REG_BCNTR (0x14) /* SMC Byte Count Register */ +#define SDXC_REG_CMDR (0x18) /* SMC Command Register */ +#define SDXC_REG_CARG (0x1C) /* SMC Argument Register */ +#define SDXC_REG_RESP0 (0x20) /* SMC Response Register 0 */ +#define SDXC_REG_RESP1 (0x24) /* SMC Response Register 1 */ +#define SDXC_REG_RESP2 (0x28) /* SMC Response Register 2 */ +#define SDXC_REG_RESP3 (0x2C) /* SMC Response Register 3 */ +#define SDXC_REG_IMASK (0x30) /* SMC Interrupt Mask Register */ +#define SDXC_REG_MISTA (0x34) /* SMC Masked Interrupt Status Register */ +#define SDXC_REG_RINTR (0x38) /* SMC Raw Interrupt Status Register */ +#define SDXC_REG_STAS (0x3C) /* SMC Status Register */ +#define SDXC_REG_FTRGL (0x40) /* SMC FIFO Threshold Watermark Registe */ +#define SDXC_REG_FUNS (0x44) /* SMC Function Select Register */ +#define SDXC_REG_CBCR (0x48) /* SMC CIU Byte Count Register */ +#define SDXC_REG_BBCR (0x4C) /* SMC BIU Byte Count Register */ +#define SDXC_REG_DBGC (0x50) /* SMC Debug Enable Register */ +#define SDXC_REG_HWRST (0x78) /* SMC Card Hardware Reset for Register */ +#define SDXC_REG_DMAC (0x80) /* SMC IDMAC Control Register */ +#define SDXC_REG_DLBA (0x84) /* SMC IDMAC Descriptor List Base Addre */ +#define SDXC_REG_IDST (0x88) /* SMC IDMAC Status Register */ +#define SDXC_REG_IDIE (0x8C) /* SMC IDMAC Interrupt Enable Register */ +#define SDXC_REG_CHDA (0x90) +#define SDXC_REG_CBDA (0x94) + +#define mmc_readl(host, reg) \ + readl((host)->reg_base + SDXC_##reg) +#define mmc_writel(host, reg, value) \ + writel((value), (host)->reg_base + SDXC_##reg) + +/* global control register bits */ +#define SDXC_SOFT_RESET BIT(0) +#define SDXC_FIFO_RESET BIT(1) +#define SDXC_DMA_RESET BIT(2) +#define SDXC_INTERRUPT_ENABLE_BIT BIT(4) +#define SDXC_DMA_ENABLE_BIT BIT(5) +#define SDXC_DEBOUNCE_ENABLE_BIT BIT(8) +#define SDXC_POSEDGE_LATCH_DATA BIT(9) +#define SDXC_DDR_MODE BIT(10) +#define SDXC_MEMORY_ACCESS_DONE BIT(29) +#define SDXC_ACCESS_DONE_DIRECT BIT(30) +#define SDXC_ACCESS_BY_AHB BIT(31) +#define SDXC_ACCESS_BY_DMA (0 << 31) +#define SDXC_HARDWARE_RESET \ + (SDXC_SOFT_RESET | SDXC_FIFO_RESET | SDXC_DMA_RESET) + +/* clock control bits */ +#define SDXC_CARD_CLOCK_ON BIT(16) +#define SDXC_LOW_POWER_ON BIT(17) + +/* bus width */ +#define SDXC_WIDTH1 0 +#define SDXC_WIDTH4 1 +#define SDXC_WIDTH8 2 + +/* smc command bits */ +#define SDXC_RESP_EXPIRE BIT(6) +#define SDXC_LONG_RESPONSE BIT(7) +#define SDXC_CHECK_RESPONSE_CRC BIT(8) +#define SDXC_DATA_EXPIRE BIT(9) +#define SDXC_WRITE BIT(10) +#define SDXC_SEQUENCE_MODE BIT(11) +#define SDXC_SEND_AUTO_STOP BIT(12) +#define SDXC_WAIT_PRE_OVER BIT(13) +#define SDXC_STOP_ABORT_CMD BIT(14) +#define SDXC_SEND_INIT_SEQUENCE BIT(15) +#define SDXC_UPCLK_ONLY BIT(21) +#define SDXC_READ_CEATA_DEV BIT(22) +#define SDXC_CCS_EXPIRE BIT(23) +#define SDXC_ENABLE_BIT_BOOT BIT(24) +#define SDXC_ALT_BOOT_OPTIONS BIT(25) +#define SDXC_BOOT_ACK_EXPIRE BIT(26) +#define SDXC_BOOT_ABORT BIT(27) +#define SDXC_VOLTAGE_SWITCH BIT(28) +#define SDXC_USE_HOLD_REGISTER BIT(29) +#define SDXC_START BIT(31) + +/* interrupt bits */ +#define SDXC_RESP_ERROR BIT(1) +#define SDXC_COMMAND_DONE BIT(2) +#define SDXC_DATA_OVER BIT(3) +#define SDXC_TX_DATA_REQUEST BIT(4) +#define SDXC_RX_DATA_REQUEST BIT(5) +#define SDXC_RESP_CRC_ERROR BIT(6) +#define SDXC_DATA_CRC_ERROR BIT(7) +#define SDXC_RESP_TIMEOUT BIT(8) +#define SDXC_DATA_TIMEOUT BIT(9) +#define SDXC_VOLTAGE_CHANGE_DONE BIT(10) +#define SDXC_FIFO_RUN_ERROR BIT(11) +#define SDXC_HARD_WARE_LOCKED BIT(12) +#define SDXC_START_BIT_ERROR BIT(13) +#define SDXC_AUTO_COMMAND_DONE BIT(14) +#define SDXC_END_BIT_ERROR BIT(15) +#define SDXC_SDIO_INTERRUPT BIT(16) +#define SDXC_CARD_INSERT BIT(30) +#define SDXC_CARD_REMOVE BIT(31) +#define SDXC_INTERRUPT_ERROR_BIT \ + (SDXC_RESP_ERROR | SDXC_RESP_CRC_ERROR | SDXC_DATA_CRC_ERROR | \ + SDXC_RESP_TIMEOUT | SDXC_DATA_TIMEOUT | SDXC_FIFO_RUN_ERROR | \ + SDXC_HARD_WARE_LOCKED | SDXC_START_BIT_ERROR | SDXC_END_BIT_ERROR) +#define SDXC_INTERRUPT_DONE_BIT \ + (SDXC_AUTO_COMMAND_DONE | SDXC_DATA_OVER | \ + SDXC_COMMAND_DONE | SDXC_VOLTAGE_CHANGE_DONE) + +/* status */ +#define SDXC_RXWL_FLAG BIT(0) +#define SDXC_TXWL_FLAG BIT(1) +#define SDXC_FIFO_EMPTY BIT(2) +#define SDXC_FIFO_FULL BIT(3) +#define SDXC_CARD_PRESENT BIT(8) +#define SDXC_CARD_DATA_BUSY BIT(9) +#define SDXC_DATA_FSM_BUSY BIT(10) +#define SDXC_DMA_REQUEST BIT(31) +#define SDXC_FIFO_SIZE 16 + +/* Function select */ +#define SDXC_CEATA_ON (0xceaa << 16) +#define SDXC_SEND_IRQ_RESPONSE BIT(0) +#define SDXC_SDIO_READ_WAIT BIT(1) +#define SDXC_ABORT_READ_DATA BIT(2) +#define SDXC_SEND_CCSD BIT(8) +#define SDXC_SEND_AUTO_STOPCCSD BIT(9) +#define SDXC_CEATA_DEV_IRQ_ENABLE BIT(10) + +/* IDMA controller bus mod bit field */ +#define SDXC_IDMAC_SOFT_RESET BIT(0) +#define SDXC_IDMAC_FIX_BURST BIT(1) +#define SDXC_IDMAC_IDMA_ON BIT(7) +#define SDXC_IDMAC_REFETCH_DES BIT(31) + +/* IDMA status bit field */ +#define SDXC_IDMAC_TRANSMIT_INTERRUPT BIT(0) +#define SDXC_IDMAC_RECEIVE_INTERRUPT BIT(1) +#define SDXC_IDMAC_FATAL_BUS_ERROR BIT(2) +#define SDXC_IDMAC_DESTINATION_INVALID BIT(4) +#define SDXC_IDMAC_CARD_ERROR_SUM BIT(5) +#define SDXC_IDMAC_NORMAL_INTERRUPT_SUM BIT(8) +#define SDXC_IDMAC_ABNORMAL_INTERRUPT_SUM BIT(9) +#define SDXC_IDMAC_HOST_ABORT_INTERRUPT BIT(10) +#define SDXC_IDMAC_IDLE (0 << 13) +#define SDXC_IDMAC_SUSPEND (1 << 13) +#define SDXC_IDMAC_DESC_READ (2 << 13) +#define SDXC_IDMAC_DESC_CHECK (3 << 13) +#define SDXC_IDMAC_READ_REQUEST_WAIT (4 << 13) +#define SDXC_IDMAC_WRITE_REQUEST_WAIT (5 << 13) +#define SDXC_IDMAC_READ (6 << 13) +#define SDXC_IDMAC_WRITE (7 << 13) +#define SDXC_IDMAC_DESC_CLOSE (8 << 13) + +/* +* If the idma-des-size-bits of property is ie 13, bufsize bits are: +* Bits 0-12: buf1 size +* Bits 13-25: buf2 size +* Bits 26-31: not used +* Since we only ever set buf1 size, we can simply store it directly. +*/ +#define SDXC_IDMAC_DES0_DIC BIT(1) /* disable interrupt on completion */ +#define SDXC_IDMAC_DES0_LD BIT(2) /* last descriptor */ +#define SDXC_IDMAC_DES0_FD BIT(3) /* first descriptor */ +#define SDXC_IDMAC_DES0_CH BIT(4) /* chain mode */ +#define SDXC_IDMAC_DES0_ER BIT(5) /* end of ring */ +#define SDXC_IDMAC_DES0_CES BIT(30) /* card error summary */ +#define SDXC_IDMAC_DES0_OWN BIT(31) /* 1-idma owns it, 0-host owns it */ + +struct sunxi_idma_des { + u32 config; + u32 buf_size; + u32 buf_addr_ptr1; + u32 buf_addr_ptr2; +}; + +struct sunxi_mmc_host { + struct mmc_host *mmc; + struct reset_control *reset; + + /* IO mapping base */ + void __iomem *reg_base; + + /* clock management */ + struct clk *clk_ahb; + struct clk *clk_mmc; + + /* irq */ + spinlock_t lock; + int irq; + u32 int_sum; + u32 sdio_imask; + + /* dma */ + u32 idma_des_size_bits; + dma_addr_t sg_dma; + void *sg_cpu; + bool wait_dma; + + struct mmc_request *mrq; + struct mmc_request *manual_stop_mrq; + int ferror; +}; + +static int sunxi_mmc_reset_host(struct sunxi_mmc_host *host) +{ + unsigned long expire = jiffies + msecs_to_jiffies(250); + u32 rval; + + mmc_writel(host, REG_CMDR, SDXC_HARDWARE_RESET); + do { + rval = mmc_readl(host, REG_GCTRL); + } while (time_before(jiffies, expire) && (rval & SDXC_HARDWARE_RESET)); + + if (rval & SDXC_HARDWARE_RESET) { + dev_err(mmc_dev(host->mmc), "fatal err reset timeout\n"); + return -EIO; + } + + return 0; +} + +static int sunxi_mmc_init_host(struct mmc_host *mmc) +{ + u32 rval; + struct sunxi_mmc_host *host = mmc_priv(mmc); + + if (sunxi_mmc_reset_host(host)) + return -EIO; + + mmc_writel(host, REG_FTRGL, 0x20070008); + mmc_writel(host, REG_TMOUT, 0xffffffff); + mmc_writel(host, REG_IMASK, host->sdio_imask); + mmc_writel(host, REG_RINTR, 0xffffffff); + mmc_writel(host, REG_DBGC, 0xdeb); + mmc_writel(host, REG_FUNS, SDXC_CEATA_ON); + mmc_writel(host, REG_DLBA, host->sg_dma); + + rval = mmc_readl(host, REG_GCTRL); + rval |= SDXC_INTERRUPT_ENABLE_BIT; + rval &= ~SDXC_ACCESS_DONE_DIRECT; + mmc_writel(host, REG_GCTRL, rval); + + return 0; +} + +static void sunxi_mmc_init_idma_des(struct sunxi_mmc_host *host, + struct mmc_data *data) +{ + struct sunxi_idma_des *pdes = (struct sunxi_idma_des *)host->sg_cpu; + struct sunxi_idma_des *pdes_pa = (struct sunxi_idma_des *)host->sg_dma; + int i, max_len = (1 << host->idma_des_size_bits); + + for (i = 0; i < data->sg_len; i++) { + pdes[i].config = SDXC_IDMAC_DES0_CH | SDXC_IDMAC_DES0_OWN | + SDXC_IDMAC_DES0_DIC; + + if (data->sg[i].length == max_len) + pdes[i].buf_size = 0; /* 0 == max_len */ + else + pdes[i].buf_size = data->sg[i].length; + + pdes[i].buf_addr_ptr1 = sg_dma_address(&data->sg[i]); + pdes[i].buf_addr_ptr2 = (u32)&pdes_pa[i + 1]; + } + + pdes[0].config |= SDXC_IDMAC_DES0_FD; + pdes[i - 1].config = SDXC_IDMAC_DES0_OWN | SDXC_IDMAC_DES0_LD; + + /* + * Avoid the io-store starting the idmac hitting io-mem before the + * descriptors hit the main-mem. + */ + wmb(); +} + +static enum dma_data_direction sunxi_mmc_get_dma_dir(struct mmc_data *data) +{ + if (data->flags & MMC_DATA_WRITE) + return DMA_TO_DEVICE; + else + return DMA_FROM_DEVICE; +} + +static int sunxi_mmc_map_dma(struct sunxi_mmc_host *host, + struct mmc_data *data) +{ + u32 i, dma_len; + struct scatterlist *sg; + + dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, + sunxi_mmc_get_dma_dir(data)); + if (dma_len == 0) { + dev_err(mmc_dev(host->mmc), "dma_map_sg failed\n"); + return -ENOMEM; + } + + for_each_sg(data->sg, sg, data->sg_len, i) { + if (sg->offset & 3 || sg->length & 3) { + dev_err(mmc_dev(host->mmc), + "unaligned scatterlist: os %x length %d\n", + sg->offset, sg->length); + return -EINVAL; + } + } + + return 0; +} + +static void sunxi_mmc_start_dma(struct sunxi_mmc_host *host, + struct mmc_data *data) +{ + u32 rval; + + sunxi_mmc_init_idma_des(host, data); + + rval = mmc_readl(host, REG_GCTRL); + rval |= SDXC_DMA_ENABLE_BIT; + mmc_writel(host, REG_GCTRL, rval); + rval |= SDXC_DMA_RESET; + mmc_writel(host, REG_GCTRL, rval); + + mmc_writel(host, REG_DMAC, SDXC_IDMAC_SOFT_RESET); + + if (!(data->flags & MMC_DATA_WRITE)) + mmc_writel(host, REG_IDIE, SDXC_IDMAC_RECEIVE_INTERRUPT); + + mmc_writel(host, REG_DMAC, + SDXC_IDMAC_FIX_BURST | SDXC_IDMAC_IDMA_ON); +} + +static void sunxi_mmc_send_manual_stop(struct sunxi_mmc_host *host, + struct mmc_request *req) +{ + u32 arg, cmd_val, ri; + unsigned long expire = jiffies + msecs_to_jiffies(1000); + + cmd_val = SDXC_START | SDXC_RESP_EXPIRE | + SDXC_STOP_ABORT_CMD | SDXC_CHECK_RESPONSE_CRC; + + if (req->cmd->opcode == SD_IO_RW_EXTENDED) { + cmd_val |= SD_IO_RW_DIRECT; + arg = (1 << 31) | (0 << 28) | (SDIO_CCCR_ABORT << 9) | + ((req->cmd->arg >> 28) & 0x7); + } else { + cmd_val |= MMC_STOP_TRANSMISSION; + arg = 0; + } + + mmc_writel(host, REG_CARG, arg); + mmc_writel(host, REG_CMDR, cmd_val); + + do { + ri = mmc_readl(host, REG_RINTR); + } while (!(ri & (SDXC_COMMAND_DONE | SDXC_INTERRUPT_ERROR_BIT)) && + time_before(jiffies, expire)); + + if (!(ri & SDXC_COMMAND_DONE) || (ri & SDXC_INTERRUPT_ERROR_BIT)) { + dev_err(mmc_dev(host->mmc), "send stop command failed\n"); + if (req->stop) + req->stop->resp[0] = -ETIMEDOUT; + } else { + if (req->stop) + req->stop->resp[0] = mmc_readl(host, REG_RESP0); + } + + mmc_writel(host, REG_RINTR, 0xffff); +} + +static void sunxi_mmc_dump_errinfo(struct sunxi_mmc_host *host) +{ + struct mmc_command *cmd = host->mrq->cmd; + struct mmc_data *data = host->mrq->data; + + /* For some cmds timeout is normal with sd/mmc cards */ + if ((host->int_sum & SDXC_INTERRUPT_ERROR_BIT) == + SDXC_RESP_TIMEOUT && (cmd->opcode == SD_IO_SEND_OP_COND || + cmd->opcode == SD_IO_RW_DIRECT)) + return; + + dev_err(mmc_dev(host->mmc), + "smc %d err, cmd %d,%s%s%s%s%s%s%s%s%s%s !!\n", + host->mmc->index, cmd->opcode, + data ? (data->flags & MMC_DATA_WRITE ? " WR" : " RD") : "", + host->int_sum & SDXC_RESP_ERROR ? " RE" : "", + host->int_sum & SDXC_RESP_CRC_ERROR ? " RCE" : "", + host->int_sum & SDXC_DATA_CRC_ERROR ? " DCE" : "", + host->int_sum & SDXC_RESP_TIMEOUT ? " RTO" : "", + host->int_sum & SDXC_DATA_TIMEOUT ? " DTO" : "", + host->int_sum & SDXC_FIFO_RUN_ERROR ? " FE" : "", + host->int_sum & SDXC_HARD_WARE_LOCKED ? " HL" : "", + host->int_sum & SDXC_START_BIT_ERROR ? " SBE" : "", + host->int_sum & SDXC_END_BIT_ERROR ? " EBE" : "" + ); +} + +/* Called in interrupt context! */ +static irqreturn_t sunxi_mmc_finalize_request(struct sunxi_mmc_host *host) +{ + struct mmc_request *mrq = host->mrq; + struct mmc_data *data = mrq->data; + u32 rval; + + mmc_writel(host, REG_IMASK, host->sdio_imask); + mmc_writel(host, REG_IDIE, 0); + + if (host->int_sum & SDXC_INTERRUPT_ERROR_BIT) { + sunxi_mmc_dump_errinfo(host); + mrq->cmd->error = -ETIMEDOUT; + + if (data) { + data->error = -ETIMEDOUT; + host->manual_stop_mrq = mrq; + } + + if (mrq->stop) + mrq->stop->error = -ETIMEDOUT; + } else { + if (mrq->cmd->flags & MMC_RSP_136) { + mrq->cmd->resp[0] = mmc_readl(host, REG_RESP3); + mrq->cmd->resp[1] = mmc_readl(host, REG_RESP2); + mrq->cmd->resp[2] = mmc_readl(host, REG_RESP1); + mrq->cmd->resp[3] = mmc_readl(host, REG_RESP0); + } else { + mrq->cmd->resp[0] = mmc_readl(host, REG_RESP0); + } + + if (data) + data->bytes_xfered = data->blocks * data->blksz; + } + + if (data) { + mmc_writel(host, REG_IDST, 0x337); + mmc_writel(host, REG_DMAC, 0); + rval = mmc_readl(host, REG_GCTRL); + rval |= SDXC_DMA_RESET; + mmc_writel(host, REG_GCTRL, rval); + rval &= ~SDXC_DMA_ENABLE_BIT; + mmc_writel(host, REG_GCTRL, rval); + rval |= SDXC_FIFO_RESET; + mmc_writel(host, REG_GCTRL, rval); + dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, + sunxi_mmc_get_dma_dir(data)); + } + + mmc_writel(host, REG_RINTR, 0xffff); + + host->mrq = NULL; + host->int_sum = 0; + host->wait_dma = false; + + return host->manual_stop_mrq ? IRQ_WAKE_THREAD : IRQ_HANDLED; +} + +static irqreturn_t sunxi_mmc_irq(int irq, void *dev_id) +{ + struct sunxi_mmc_host *host = dev_id; + struct mmc_request *mrq; + u32 msk_int, idma_int; + bool finalize = false; + bool sdio_int = false; + irqreturn_t ret = IRQ_HANDLED; + + spin_lock(&host->lock); + + idma_int = mmc_readl(host, REG_IDST); + msk_int = mmc_readl(host, REG_MISTA); + + dev_dbg(mmc_dev(host->mmc), "irq: rq %p mi %08x idi %08x\n", + host->mrq, msk_int, idma_int); + + mrq = host->mrq; + if (mrq) { + if (idma_int & SDXC_IDMAC_RECEIVE_INTERRUPT) + host->wait_dma = false; + + host->int_sum |= msk_int; + + /* Wait for COMMAND_DONE on RESPONSE_TIMEOUT before finalize */ + if ((host->int_sum & SDXC_RESP_TIMEOUT) && + !(host->int_sum & SDXC_COMMAND_DONE)) + mmc_writel(host, REG_IMASK, + host->sdio_imask | SDXC_COMMAND_DONE); + /* Don't wait for dma on error */ + else if (host->int_sum & SDXC_INTERRUPT_ERROR_BIT) + finalize = true; + else if ((host->int_sum & SDXC_INTERRUPT_DONE_BIT) && + !host->wait_dma) + finalize = true; + } + + if (msk_int & SDXC_SDIO_INTERRUPT) + sdio_int = true; + + mmc_writel(host, REG_RINTR, msk_int); + mmc_writel(host, REG_IDST, idma_int); + + if (finalize) + ret = sunxi_mmc_finalize_request(host); + + spin_unlock(&host->lock); + + if (finalize && ret == IRQ_HANDLED) + mmc_request_done(host->mmc, mrq); + + if (sdio_int) + mmc_signal_sdio_irq(host->mmc); + + return ret; +} + +static irqreturn_t sunxi_mmc_handle_manual_stop(int irq, void *dev_id) +{ + struct sunxi_mmc_host *host = dev_id; + struct mmc_request *mrq; + unsigned long iflags; + + spin_lock_irqsave(&host->lock, iflags); + mrq = host->manual_stop_mrq; + spin_unlock_irqrestore(&host->lock, iflags); + + if (!mrq) { + dev_err(mmc_dev(host->mmc), "no request for manual stop\n"); + return IRQ_HANDLED; + } + + dev_err(mmc_dev(host->mmc), "data error, sending stop command\n"); + sunxi_mmc_send_manual_stop(host, mrq); + + spin_lock_irqsave(&host->lock, iflags); + host->manual_stop_mrq = NULL; + spin_unlock_irqrestore(&host->lock, iflags); + + mmc_request_done(host->mmc, mrq); + + return IRQ_HANDLED; +} + +static int sunxi_mmc_oclk_onoff(struct sunxi_mmc_host *host, u32 oclk_en) +{ + unsigned long expire = jiffies + msecs_to_jiffies(250); + u32 rval; + + rval = mmc_readl(host, REG_CLKCR); + rval &= ~(SDXC_CARD_CLOCK_ON | SDXC_LOW_POWER_ON); + + if (oclk_en) + rval |= SDXC_CARD_CLOCK_ON; + + mmc_writel(host, REG_CLKCR, rval); + + rval = SDXC_START | SDXC_UPCLK_ONLY | SDXC_WAIT_PRE_OVER; + mmc_writel(host, REG_CMDR, rval); + + do { + rval = mmc_readl(host, REG_CMDR); + } while (time_before(jiffies, expire) && (rval & SDXC_START)); + + /* clear irq status bits set by the command */ + mmc_writel(host, REG_RINTR, + mmc_readl(host, REG_RINTR) & ~SDXC_SDIO_INTERRUPT); + + if (rval & SDXC_START) { + dev_err(mmc_dev(host->mmc), "fatal err update clk timeout\n"); + return -EIO; + } + + return 0; +} + +static int sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *host, + struct mmc_ios *ios) +{ + u32 rate, oclk_dly, rval, sclk_dly, src_clk; + int ret; + + rate = clk_round_rate(host->clk_mmc, ios->clock); + dev_dbg(mmc_dev(host->mmc), "setting clk to %d, rounded %d\n", + ios->clock, rate); + + /* setting clock rate */ + ret = clk_set_rate(host->clk_mmc, rate); + if (ret) { + dev_err(mmc_dev(host->mmc), "error setting clk to %d: %d\n", + rate, ret); + return ret; + } + + ret = sunxi_mmc_oclk_onoff(host, 0); + if (ret) + return ret; + + /* clear internal divider */ + rval = mmc_readl(host, REG_CLKCR); + rval &= ~0xff; + mmc_writel(host, REG_CLKCR, rval); + + /* determine delays */ + if (rate <= 400000) { + oclk_dly = 0; + sclk_dly = 7; + } else if (rate <= 25000000) { + oclk_dly = 0; + sclk_dly = 5; + } else if (rate <= 50000000) { + if (ios->timing == MMC_TIMING_UHS_DDR50) { + oclk_dly = 2; + sclk_dly = 4; + } else { + oclk_dly = 3; + sclk_dly = 5; + } + } else { + /* rate > 50000000 */ + oclk_dly = 2; + sclk_dly = 4; + } + + src_clk = clk_get_rate(clk_get_parent(host->clk_mmc)); + if (src_clk >= 300000000 && src_clk <= 400000000) { + if (oclk_dly) + oclk_dly--; + if (sclk_dly) + sclk_dly--; + } + + clk_sunxi_mmc_phase_control(host->clk_mmc, sclk_dly, oclk_dly); + + return sunxi_mmc_oclk_onoff(host, 1); +} + +static void sunxi_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct sunxi_mmc_host *host = mmc_priv(mmc); + u32 rval; + + /* Set the power state */ + switch (ios->power_mode) { + case MMC_POWER_ON: + break; + + case MMC_POWER_UP: + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd); + + host->ferror = sunxi_mmc_init_host(mmc); + if (host->ferror) + return; + + dev_dbg(mmc_dev(mmc), "power on!\n"); + break; + + case MMC_POWER_OFF: + dev_dbg(mmc_dev(mmc), "power off!\n"); + sunxi_mmc_reset_host(host); + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); + break; + } + + /* set bus width */ + switch (ios->bus_width) { + case MMC_BUS_WIDTH_1: + mmc_writel(host, REG_WIDTH, SDXC_WIDTH1); + break; + case MMC_BUS_WIDTH_4: + mmc_writel(host, REG_WIDTH, SDXC_WIDTH4); + break; + case MMC_BUS_WIDTH_8: + mmc_writel(host, REG_WIDTH, SDXC_WIDTH8); + break; + } + + /* set ddr mode */ + rval = mmc_readl(host, REG_GCTRL); + if (ios->timing == MMC_TIMING_UHS_DDR50) + rval |= SDXC_DDR_MODE; + else + rval &= ~SDXC_DDR_MODE; + mmc_writel(host, REG_GCTRL, rval); + + /* set up clock */ + if (ios->clock && ios->power_mode) { + host->ferror = sunxi_mmc_clk_set_rate(host, ios); + /* Android code had a usleep_range(50000, 55000); here */ + } +} + +static void sunxi_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) +{ + struct sunxi_mmc_host *host = mmc_priv(mmc); + unsigned long flags; + u32 imask; + + spin_lock_irqsave(&host->lock, flags); + + imask = mmc_readl(host, REG_IMASK); + if (enable) { + host->sdio_imask = SDXC_SDIO_INTERRUPT; + imask |= SDXC_SDIO_INTERRUPT; + } else { + host->sdio_imask = 0; + imask &= ~SDXC_SDIO_INTERRUPT; + } + mmc_writel(host, REG_IMASK, imask); + spin_unlock_irqrestore(&host->lock, flags); +} + +static void sunxi_mmc_hw_reset(struct mmc_host *mmc) +{ + struct sunxi_mmc_host *host = mmc_priv(mmc); + mmc_writel(host, REG_HWRST, 0); + udelay(10); + mmc_writel(host, REG_HWRST, 1); + udelay(300); +} + +static void sunxi_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct sunxi_mmc_host *host = mmc_priv(mmc); + struct mmc_command *cmd = mrq->cmd; + struct mmc_data *data = mrq->data; + unsigned long iflags; + u32 imask = SDXC_INTERRUPT_ERROR_BIT; + u32 cmd_val = SDXC_START | (cmd->opcode & 0x3f); + int ret; + + /* Check for set_ios errors (should never happen) */ + if (host->ferror) { + mrq->cmd->error = host->ferror; + mmc_request_done(mmc, mrq); + return; + } + + if (data) { + ret = sunxi_mmc_map_dma(host, data); + if (ret < 0) { + dev_err(mmc_dev(mmc), "map DMA failed\n"); + cmd->error = ret; + data->error = ret; + mmc_request_done(mmc, mrq); + return; + } + } + + if (cmd->opcode == MMC_GO_IDLE_STATE) { + cmd_val |= SDXC_SEND_INIT_SEQUENCE; + imask |= SDXC_COMMAND_DONE; + } + + if (cmd->flags & MMC_RSP_PRESENT) { + cmd_val |= SDXC_RESP_EXPIRE; + if (cmd->flags & MMC_RSP_136) + cmd_val |= SDXC_LONG_RESPONSE; + if (cmd->flags & MMC_RSP_CRC) + cmd_val |= SDXC_CHECK_RESPONSE_CRC; + + if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC) { + cmd_val |= SDXC_DATA_EXPIRE | SDXC_WAIT_PRE_OVER; + if (cmd->data->flags & MMC_DATA_STREAM) { + imask |= SDXC_AUTO_COMMAND_DONE; + cmd_val |= SDXC_SEQUENCE_MODE | + SDXC_SEND_AUTO_STOP; + } + + if (cmd->data->stop) { + imask |= SDXC_AUTO_COMMAND_DONE; + cmd_val |= SDXC_SEND_AUTO_STOP; + } else { + imask |= SDXC_DATA_OVER; + } + + if (cmd->data->flags & MMC_DATA_WRITE) + cmd_val |= SDXC_WRITE; + else + host->wait_dma = true; + } else { + imask |= SDXC_COMMAND_DONE; + } + } else { + imask |= SDXC_COMMAND_DONE; + } + + dev_dbg(mmc_dev(mmc), "cmd %d(%08x) arg %x ie 0x%08x len %d\n", + cmd_val & 0x3f, cmd_val, cmd->arg, imask, + mrq->data ? mrq->data->blksz * mrq->data->blocks : 0); + + spin_lock_irqsave(&host->lock, iflags); + + if (host->mrq || host->manual_stop_mrq) { + spin_unlock_irqrestore(&host->lock, iflags); + + if (data) + dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len, + sunxi_mmc_get_dma_dir(data)); + + dev_err(mmc_dev(mmc), "request already pending\n"); + mrq->cmd->error = -EBUSY; + mmc_request_done(mmc, mrq); + return; + } + + if (data) { + mmc_writel(host, REG_BLKSZ, data->blksz); + mmc_writel(host, REG_BCNTR, data->blksz * data->blocks); + sunxi_mmc_start_dma(host, data); + } + + host->mrq = mrq; + mmc_writel(host, REG_IMASK, host->sdio_imask | imask); + mmc_writel(host, REG_CARG, cmd->arg); + mmc_writel(host, REG_CMDR, cmd_val); + + spin_unlock_irqrestore(&host->lock, iflags); +} + +static const struct of_device_id sunxi_mmc_of_match[] = { + { .compatible = "allwinner,sun4i-a10-mmc", }, + { .compatible = "allwinner,sun5i-a13-mmc", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, sunxi_mmc_of_match); + +static struct mmc_host_ops sunxi_mmc_ops = { + .request = sunxi_mmc_request, + .set_ios = sunxi_mmc_set_ios, + .get_ro = mmc_gpio_get_ro, + .get_cd = mmc_gpio_get_cd, + .enable_sdio_irq = sunxi_mmc_enable_sdio_irq, + .hw_reset = sunxi_mmc_hw_reset, +}; + +static int sunxi_mmc_resource_request(struct sunxi_mmc_host *host, + struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + int ret; + + if (of_device_is_compatible(np, "allwinner,sun4i-a10-mmc")) + host->idma_des_size_bits = 13; + else + host->idma_des_size_bits = 16; + + ret = mmc_regulator_get_supply(host->mmc); + if (ret) { + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "Could not get vmmc supply\n"); + return ret; + } + + host->reg_base = devm_ioremap_resource(&pdev->dev, + platform_get_resource(pdev, IORESOURCE_MEM, 0)); + if (IS_ERR(host->reg_base)) + return PTR_ERR(host->reg_base); + + host->clk_ahb = devm_clk_get(&pdev->dev, "ahb"); + if (IS_ERR(host->clk_ahb)) { + dev_err(&pdev->dev, "Could not get ahb clock\n"); + return PTR_ERR(host->clk_ahb); + } + + host->clk_mmc = devm_clk_get(&pdev->dev, "mmc"); + if (IS_ERR(host->clk_mmc)) { + dev_err(&pdev->dev, "Could not get mmc clock\n"); + return PTR_ERR(host->clk_mmc); + } + + host->reset = devm_reset_control_get(&pdev->dev, "ahb"); + + ret = clk_prepare_enable(host->clk_ahb); + if (ret) { + dev_err(&pdev->dev, "Enable ahb clk err %d\n", ret); + return ret; + } + + ret = clk_prepare_enable(host->clk_mmc); + if (ret) { + dev_err(&pdev->dev, "Enable mmc clk err %d\n", ret); + goto error_disable_clk_ahb; + } + + if (!IS_ERR(host->reset)) { + ret = reset_control_deassert(host->reset); + if (ret) { + dev_err(&pdev->dev, "reset err %d\n", ret); + goto error_disable_clk_mmc; + } + } + + /* + * Sometimes the controller asserts the irq on boot for some reason, + * make sure the controller is in a sane state before enabling irqs. + */ + ret = sunxi_mmc_reset_host(host); + if (ret) + goto error_assert_reset; + + host->irq = platform_get_irq(pdev, 0); + return devm_request_threaded_irq(&pdev->dev, host->irq, sunxi_mmc_irq, + sunxi_mmc_handle_manual_stop, 0, "sunxi-mmc", host); + +error_assert_reset: + if (!IS_ERR(host->reset)) + reset_control_assert(host->reset); +error_disable_clk_mmc: + clk_disable_unprepare(host->clk_mmc); +error_disable_clk_ahb: + clk_disable_unprepare(host->clk_ahb); + return ret; +} + +static int sunxi_mmc_probe(struct platform_device *pdev) +{ + struct sunxi_mmc_host *host; + struct mmc_host *mmc; + int ret; + + mmc = mmc_alloc_host(sizeof(struct sunxi_mmc_host), &pdev->dev); + if (!mmc) { + dev_err(&pdev->dev, "mmc alloc host failed\n"); + return -ENOMEM; + } + + host = mmc_priv(mmc); + host->mmc = mmc; + spin_lock_init(&host->lock); + + ret = sunxi_mmc_resource_request(host, pdev); + if (ret) + goto error_free_host; + + host->sg_cpu = dma_alloc_coherent(&pdev->dev, PAGE_SIZE, + &host->sg_dma, GFP_KERNEL); + if (!host->sg_cpu) { + dev_err(&pdev->dev, "Failed to allocate DMA descriptor mem\n"); + ret = -ENOMEM; + goto error_free_host; + } + + mmc->ops = &sunxi_mmc_ops; + mmc->max_blk_count = 8192; + mmc->max_blk_size = 4096; + mmc->max_segs = PAGE_SIZE / sizeof(struct sunxi_idma_des); + mmc->max_seg_size = (1 << host->idma_des_size_bits); + mmc->max_req_size = mmc->max_seg_size * mmc->max_segs; + /* 400kHz ~ 50MHz */ + mmc->f_min = 400000; + mmc->f_max = 50000000; + mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED; + + ret = mmc_of_parse(mmc); + if (ret) + goto error_free_dma; + + ret = mmc_add_host(mmc); + if (ret) + goto error_free_dma; + + dev_info(&pdev->dev, "base:0x%p irq:%u\n", host->reg_base, host->irq); + platform_set_drvdata(pdev, mmc); + return 0; + +error_free_dma: + dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma); +error_free_host: + mmc_free_host(mmc); + return ret; +} + +static int sunxi_mmc_remove(struct platform_device *pdev) +{ + struct mmc_host *mmc = platform_get_drvdata(pdev); + struct sunxi_mmc_host *host = mmc_priv(mmc); + + mmc_remove_host(mmc); + disable_irq(host->irq); + sunxi_mmc_reset_host(host); + + if (!IS_ERR(host->reset)) + reset_control_assert(host->reset); + + clk_disable_unprepare(host->clk_mmc); + clk_disable_unprepare(host->clk_ahb); + + dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma); + mmc_free_host(mmc); + + return 0; +} + +static struct platform_driver sunxi_mmc_driver = { + .driver = { + .name = "sunxi-mmc", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(sunxi_mmc_of_match), + }, + .probe = sunxi_mmc_probe, + .remove = sunxi_mmc_remove, +}; +module_platform_driver(sunxi_mmc_driver); + +MODULE_DESCRIPTION("Allwinner's SD/MMC Card Controller Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("David Lanzend�rfer <david.lanzendoerfer@o2s.ch>"); +MODULE_ALIAS("platform:sunxi-mmc"); diff --git a/drivers/mmc/host/tifm_sd.c b/drivers/mmc/host/tifm_sd.c index 457c26ea09d..d1760ebcac0 100644 --- a/drivers/mmc/host/tifm_sd.c +++ b/drivers/mmc/host/tifm_sd.c @@ -16,13 +16,14 @@ #include <linux/mmc/host.h> #include <linux/highmem.h> #include <linux/scatterlist.h> +#include <linux/module.h> #include <asm/io.h> #define DRIVER_NAME "tifm_sd" #define DRIVER_VERSION "0.8" -static int no_dma = 0; -static int fixed_timeout = 0; +static bool no_dma = 0; +static bool fixed_timeout = 0; module_param(no_dma, bool, 0644); module_param(fixed_timeout, bool, 0644); @@ -117,7 +118,7 @@ static void tifm_sd_read_fifo(struct tifm_sd *host, struct page *pg, unsigned char *buf; unsigned int pos = 0, val; - buf = kmap_atomic(pg, KM_BIO_DST_IRQ) + off; + buf = kmap_atomic(pg) + off; if (host->cmd_flags & DATA_CARRY) { buf[pos++] = host->bounce_buf_data[0]; host->cmd_flags &= ~DATA_CARRY; @@ -133,7 +134,7 @@ static void tifm_sd_read_fifo(struct tifm_sd *host, struct page *pg, } buf[pos++] = (val >> 8) & 0xff; } - kunmap_atomic(buf - off, KM_BIO_DST_IRQ); + kunmap_atomic(buf - off); } static void tifm_sd_write_fifo(struct tifm_sd *host, struct page *pg, @@ -143,7 +144,7 @@ static void tifm_sd_write_fifo(struct tifm_sd *host, struct page *pg, unsigned char *buf; unsigned int pos = 0, val; - buf = kmap_atomic(pg, KM_BIO_SRC_IRQ) + off; + buf = kmap_atomic(pg) + off; if (host->cmd_flags & DATA_CARRY) { val = host->bounce_buf_data[0] | ((buf[pos++] << 8) & 0xff00); writel(val, sock->addr + SOCK_MMCSD_DATA); @@ -160,7 +161,7 @@ static void tifm_sd_write_fifo(struct tifm_sd *host, struct page *pg, val |= (buf[pos++] << 8) & 0xff00; writel(val, sock->addr + SOCK_MMCSD_DATA); } - kunmap_atomic(buf - off, KM_BIO_SRC_IRQ); + kunmap_atomic(buf - off); } static void tifm_sd_transfer_data(struct tifm_sd *host) @@ -211,13 +212,13 @@ static void tifm_sd_copy_page(struct page *dst, unsigned int dst_off, struct page *src, unsigned int src_off, unsigned int count) { - unsigned char *src_buf = kmap_atomic(src, KM_BIO_SRC_IRQ) + src_off; - unsigned char *dst_buf = kmap_atomic(dst, KM_BIO_DST_IRQ) + dst_off; + unsigned char *src_buf = kmap_atomic(src) + src_off; + unsigned char *dst_buf = kmap_atomic(dst) + dst_off; memcpy(dst_buf, src_buf, count); - kunmap_atomic(dst_buf - dst_off, KM_BIO_DST_IRQ); - kunmap_atomic(src_buf - src_off, KM_BIO_SRC_IRQ); + kunmap_atomic(dst_buf - dst_off); + kunmap_atomic(src_buf - src_off); } static void tifm_sd_bounce_block(struct tifm_sd *host, struct mmc_data *r_data) @@ -631,7 +632,7 @@ static void tifm_sd_request(struct mmc_host *mmc, struct mmc_request *mrq) } if (host->req) { - printk(KERN_ERR "%s : unfinished request detected\n", + pr_err("%s : unfinished request detected\n", dev_name(&sock->dev)); mrq->cmd->error = -ETIMEDOUT; goto err_out; @@ -671,7 +672,7 @@ static void tifm_sd_request(struct mmc_host *mmc, struct mmc_request *mrq) r_data->flags & MMC_DATA_WRITE ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE)) { - printk(KERN_ERR "%s : scatterlist map failed\n", + pr_err("%s : scatterlist map failed\n", dev_name(&sock->dev)); mrq->cmd->error = -ENOMEM; goto err_out; @@ -683,7 +684,7 @@ static void tifm_sd_request(struct mmc_host *mmc, struct mmc_request *mrq) ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE); if (host->sg_len < 1) { - printk(KERN_ERR "%s : scatterlist map failed\n", + pr_err("%s : scatterlist map failed\n", dev_name(&sock->dev)); tifm_unmap_sg(sock, &host->bounce_buf, 1, r_data->flags & MMC_DATA_WRITE @@ -747,7 +748,7 @@ static void tifm_sd_end_cmd(unsigned long data) host->req = NULL; if (!mrq) { - printk(KERN_ERR " %s : no request to complete?\n", + pr_err(" %s : no request to complete?\n", dev_name(&sock->dev)); spin_unlock_irqrestore(&sock->lock, flags); return; @@ -786,8 +787,7 @@ static void tifm_sd_abort(unsigned long data) { struct tifm_sd *host = (struct tifm_sd*)data; - printk(KERN_ERR - "%s : card failed to respond for a long period of time " + pr_err("%s : card failed to respond for a long period of time " "(%x, %x)\n", dev_name(&host->dev->dev), host->req->cmd->opcode, host->cmd_flags); @@ -905,7 +905,7 @@ static int tifm_sd_initialize_host(struct tifm_sd *host) } if (rc) { - printk(KERN_ERR "%s : controller failed to reset\n", + pr_err("%s : controller failed to reset\n", dev_name(&sock->dev)); return -ENODEV; } @@ -931,8 +931,7 @@ static int tifm_sd_initialize_host(struct tifm_sd *host) } if (rc) { - printk(KERN_ERR - "%s : card not ready - probe failed on initialization\n", + pr_err("%s : card not ready - probe failed on initialization\n", dev_name(&sock->dev)); return -ENODEV; } @@ -953,7 +952,7 @@ static int tifm_sd_probe(struct tifm_dev *sock) if (!(TIFM_SOCK_STATE_OCCUPIED & readl(sock->addr + SOCK_PRESENT_STATE))) { - printk(KERN_WARNING "%s : card gone, unexpectedly\n", + pr_warning("%s : card gone, unexpectedly\n", dev_name(&sock->dev)); return rc; } @@ -1031,7 +1030,7 @@ static void tifm_sd_remove(struct tifm_dev *sock) static int tifm_sd_suspend(struct tifm_dev *sock, pm_message_t state) { - return mmc_suspend_host(tifm_get_drvdata(sock)); + return 0; } static int tifm_sd_resume(struct tifm_dev *sock) @@ -1045,8 +1044,6 @@ static int tifm_sd_resume(struct tifm_dev *sock) if (rc) host->eject = 1; - else - rc = mmc_resume_host(mmc); return rc; } diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c index e7765a89593..cfad844730d 100644 --- a/drivers/mmc/host/tmio_mmc.c +++ b/drivers/mmc/host/tmio_mmc.c @@ -1,8 +1,8 @@ /* - * linux/drivers/mmc/tmio_mmc.c + * linux/drivers/mmc/host/tmio_mmc.c * - * Copyright (C) 2004 Ian Molton - * Copyright (C) 2007 Ian Molton + * Copyright (C) 2007 Ian Molton + * Copyright (C) 2004 Ian Molton * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -11,935 +11,121 @@ * Driver for the MMC / SD / SDIO cell found in: * * TC6393XB TC6391XB TC6387XB T7L66XB ASIC3 - * - * This driver draws mainly on scattered spec sheets, Reverse engineering - * of the toshiba e800 SD driver and some parts of the 2.4 ASIC3 driver (4 bit - * support). (Further 4 bit support from a later datasheet). - * - * TODO: - * Investigate using a workqueue for PIO transfers - * Eliminate FIXMEs - * SDIO support - * Better Power management - * Handle MMC errors better - * double buffer support - * */ -#include <linux/module.h> -#include <linux/irq.h> + #include <linux/device.h> -#include <linux/delay.h> -#include <linux/dmaengine.h> -#include <linux/mmc/host.h> #include <linux/mfd/core.h> #include <linux/mfd/tmio.h> +#include <linux/mmc/host.h> +#include <linux/module.h> +#include <linux/pagemap.h> +#include <linux/scatterlist.h> #include "tmio_mmc.h" -static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock) -{ - u32 clk = 0, clock; - - if (new_clock) { - for (clock = host->mmc->f_min, clk = 0x80000080; - new_clock >= (clock<<1); clk >>= 1) - clock <<= 1; - clk |= 0x100; - } - - if (host->set_clk_div) - host->set_clk_div(host->pdev, (clk>>22) & 1); - - sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff); -} - -static void tmio_mmc_clk_stop(struct tmio_mmc_host *host) -{ - sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000); - msleep(10); - sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~0x0100 & - sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); - msleep(10); -} - -static void tmio_mmc_clk_start(struct tmio_mmc_host *host) -{ - sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, 0x0100 | - sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); - msleep(10); - sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100); - msleep(10); -} - -static void reset(struct tmio_mmc_host *host) -{ - /* FIXME - should we set stop clock reg here */ - sd_ctrl_write16(host, CTL_RESET_SD, 0x0000); - sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000); - msleep(10); - sd_ctrl_write16(host, CTL_RESET_SD, 0x0001); - sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001); - msleep(10); -} - -static void -tmio_mmc_finish_request(struct tmio_mmc_host *host) -{ - struct mmc_request *mrq = host->mrq; - - host->mrq = NULL; - host->cmd = NULL; - host->data = NULL; - - mmc_request_done(host->mmc, mrq); -} - -/* These are the bitmasks the tmio chip requires to implement the MMC response - * types. Note that R1 and R6 are the same in this scheme. */ -#define APP_CMD 0x0040 -#define RESP_NONE 0x0300 -#define RESP_R1 0x0400 -#define RESP_R1B 0x0500 -#define RESP_R2 0x0600 -#define RESP_R3 0x0700 -#define DATA_PRESENT 0x0800 -#define TRANSFER_READ 0x1000 -#define TRANSFER_MULTI 0x2000 -#define SECURITY_CMD 0x4000 - -static int -tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd) -{ - struct mmc_data *data = host->data; - int c = cmd->opcode; - - /* Command 12 is handled by hardware */ - if (cmd->opcode == 12 && !cmd->arg) { - sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x001); - return 0; - } - - switch (mmc_resp_type(cmd)) { - case MMC_RSP_NONE: c |= RESP_NONE; break; - case MMC_RSP_R1: c |= RESP_R1; break; - case MMC_RSP_R1B: c |= RESP_R1B; break; - case MMC_RSP_R2: c |= RESP_R2; break; - case MMC_RSP_R3: c |= RESP_R3; break; - default: - pr_debug("Unknown response type %d\n", mmc_resp_type(cmd)); - return -EINVAL; - } - - host->cmd = cmd; - -/* FIXME - this seems to be ok commented out but the spec suggest this bit - * should be set when issuing app commands. - * if(cmd->flags & MMC_FLAG_ACMD) - * c |= APP_CMD; - */ - if (data) { - c |= DATA_PRESENT; - if (data->blocks > 1) { - sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x100); - c |= TRANSFER_MULTI; - } - if (data->flags & MMC_DATA_READ) - c |= TRANSFER_READ; - } - - enable_mmc_irqs(host, TMIO_MASK_CMD); - - /* Fire off the command */ - sd_ctrl_write32(host, CTL_ARG_REG, cmd->arg); - sd_ctrl_write16(host, CTL_SD_CMD, c); - - return 0; -} - -/* - * This chip always returns (at least?) as much data as you ask for. - * I'm unsure what happens if you ask for less than a block. This should be - * looked into to ensure that a funny length read doesnt hose the controller. - */ -static void tmio_mmc_pio_irq(struct tmio_mmc_host *host) -{ - struct mmc_data *data = host->data; - void *sg_virt; - unsigned short *buf; - unsigned int count; - unsigned long flags; - - if (!data) { - pr_debug("Spurious PIO IRQ\n"); - return; - } - - sg_virt = tmio_mmc_kmap_atomic(host->sg_ptr, &flags); - buf = (unsigned short *)(sg_virt + host->sg_off); - - count = host->sg_ptr->length - host->sg_off; - if (count > data->blksz) - count = data->blksz; - - pr_debug("count: %08x offset: %08x flags %08x\n", - count, host->sg_off, data->flags); - - /* Transfer the data */ - if (data->flags & MMC_DATA_READ) - sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1); - else - sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1); - - host->sg_off += count; - - tmio_mmc_kunmap_atomic(sg_virt, &flags); - - if (host->sg_off == host->sg_ptr->length) - tmio_mmc_next_sg(host); - - return; -} - -static void tmio_mmc_do_data_irq(struct tmio_mmc_host *host) -{ - struct mmc_data *data = host->data; - struct mmc_command *stop; - - host->data = NULL; - - if (!data) { - dev_warn(&host->pdev->dev, "Spurious data end IRQ\n"); - return; - } - stop = data->stop; - - /* FIXME - return correct transfer count on errors */ - if (!data->error) - data->bytes_xfered = data->blocks * data->blksz; - else - data->bytes_xfered = 0; - - pr_debug("Completed data request\n"); - - /* - * FIXME: other drivers allow an optional stop command of any given type - * which we dont do, as the chip can auto generate them. - * Perhaps we can be smarter about when to use auto CMD12 and - * only issue the auto request when we know this is the desired - * stop command, allowing fallback to the stop command the - * upper layers expect. For now, we do what works. - */ - - if (data->flags & MMC_DATA_READ) { - if (!host->chan_rx) - disable_mmc_irqs(host, TMIO_MASK_READOP); - dev_dbg(&host->pdev->dev, "Complete Rx request %p\n", - host->mrq); - } else { - if (!host->chan_tx) - disable_mmc_irqs(host, TMIO_MASK_WRITEOP); - dev_dbg(&host->pdev->dev, "Complete Tx request %p\n", - host->mrq); - } - - if (stop) { - if (stop->opcode == 12 && !stop->arg) - sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x000); - else - BUG(); - } - - tmio_mmc_finish_request(host); -} - -static void tmio_mmc_data_irq(struct tmio_mmc_host *host) -{ - struct mmc_data *data = host->data; - - if (!data) - return; - - if (host->chan_tx && (data->flags & MMC_DATA_WRITE)) { - /* - * Has all data been written out yet? Testing on SuperH showed, - * that in most cases the first interrupt comes already with the - * BUSY status bit clear, but on some operations, like mount or - * in the beginning of a write / sync / umount, there is one - * DATAEND interrupt with the BUSY bit set, in this cases - * waiting for one more interrupt fixes the problem. - */ - if (!(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_CMD_BUSY)) { - disable_mmc_irqs(host, TMIO_STAT_DATAEND); - tasklet_schedule(&host->dma_complete); - } - } else if (host->chan_rx && (data->flags & MMC_DATA_READ)) { - disable_mmc_irqs(host, TMIO_STAT_DATAEND); - tasklet_schedule(&host->dma_complete); - } else { - tmio_mmc_do_data_irq(host); - } -} - -static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, - unsigned int stat) -{ - struct mmc_command *cmd = host->cmd; - int i, addr; - - if (!host->cmd) { - pr_debug("Spurious CMD irq\n"); - return; - } - - host->cmd = NULL; - - /* This controller is sicker than the PXA one. Not only do we need to - * drop the top 8 bits of the first response word, we also need to - * modify the order of the response for short response command types. - */ - - for (i = 3, addr = CTL_RESPONSE ; i >= 0 ; i--, addr += 4) - cmd->resp[i] = sd_ctrl_read32(host, addr); - - if (cmd->flags & MMC_RSP_136) { - cmd->resp[0] = (cmd->resp[0] << 8) | (cmd->resp[1] >> 24); - cmd->resp[1] = (cmd->resp[1] << 8) | (cmd->resp[2] >> 24); - cmd->resp[2] = (cmd->resp[2] << 8) | (cmd->resp[3] >> 24); - cmd->resp[3] <<= 8; - } else if (cmd->flags & MMC_RSP_R3) { - cmd->resp[0] = cmd->resp[3]; - } - - if (stat & TMIO_STAT_CMDTIMEOUT) - cmd->error = -ETIMEDOUT; - else if (stat & TMIO_STAT_CRCFAIL && cmd->flags & MMC_RSP_CRC) - cmd->error = -EILSEQ; - - /* If there is data to handle we enable data IRQs here, and - * we will ultimatley finish the request in the data_end handler. - * If theres no data or we encountered an error, finish now. - */ - if (host->data && !cmd->error) { - if (host->data->flags & MMC_DATA_READ) { - if (!host->chan_rx) - enable_mmc_irqs(host, TMIO_MASK_READOP); - } else { - struct dma_chan *chan = host->chan_tx; - if (!chan) - enable_mmc_irqs(host, TMIO_MASK_WRITEOP); - else - tasklet_schedule(&host->dma_issue); - } - } else { - tmio_mmc_finish_request(host); - } - - return; -} - -static irqreturn_t tmio_mmc_irq(int irq, void *devid) -{ - struct tmio_mmc_host *host = devid; - unsigned int ireg, irq_mask, status; - - pr_debug("MMC IRQ begin\n"); - - status = sd_ctrl_read32(host, CTL_STATUS); - irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK); - ireg = status & TMIO_MASK_IRQ & ~irq_mask; - - pr_debug_status(status); - pr_debug_status(ireg); - - if (!ireg) { - disable_mmc_irqs(host, status & ~irq_mask); - - pr_warning("tmio_mmc: Spurious irq, disabling! " - "0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg); - pr_debug_status(status); - - goto out; - } - - while (ireg) { - /* Card insert / remove attempts */ - if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) { - ack_mmc_irqs(host, TMIO_STAT_CARD_INSERT | - TMIO_STAT_CARD_REMOVE); - mmc_detect_change(host->mmc, msecs_to_jiffies(100)); - } - - /* CRC and other errors */ -/* if (ireg & TMIO_STAT_ERR_IRQ) - * handled |= tmio_error_irq(host, irq, stat); - */ - - /* Command completion */ - if (ireg & TMIO_MASK_CMD) { - ack_mmc_irqs(host, TMIO_MASK_CMD); - tmio_mmc_cmd_irq(host, status); - } - - /* Data transfer */ - if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) { - ack_mmc_irqs(host, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ); - tmio_mmc_pio_irq(host); - } - - /* Data transfer completion */ - if (ireg & TMIO_STAT_DATAEND) { - ack_mmc_irqs(host, TMIO_STAT_DATAEND); - tmio_mmc_data_irq(host); - } - - /* Check status - keep going until we've handled it all */ - status = sd_ctrl_read32(host, CTL_STATUS); - irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK); - ireg = status & TMIO_MASK_IRQ & ~irq_mask; - - pr_debug("Status at end of loop: %08x\n", status); - pr_debug_status(status); - } - pr_debug("MMC IRQ end\n"); - -out: - return IRQ_HANDLED; -} - -#ifdef CONFIG_TMIO_MMC_DMA -static void tmio_mmc_enable_dma(struct tmio_mmc_host *host, bool enable) -{ -#if defined(CONFIG_SUPERH) || defined(CONFIG_ARCH_SHMOBILE) - /* Switch DMA mode on or off - SuperH specific? */ - sd_ctrl_write16(host, 0xd8, enable ? 2 : 0); -#endif -} - -static void tmio_dma_complete(void *arg) +#ifdef CONFIG_PM_SLEEP +static int tmio_mmc_suspend(struct device *dev) { - struct tmio_mmc_host *host = arg; - - dev_dbg(&host->pdev->dev, "Command completed\n"); - - if (!host->data) - dev_warn(&host->pdev->dev, "NULL data in DMA completion!\n"); - else - enable_mmc_irqs(host, TMIO_STAT_DATAEND); -} - -static int tmio_mmc_start_dma_rx(struct tmio_mmc_host *host) -{ - struct scatterlist *sg = host->sg_ptr; - struct dma_async_tx_descriptor *desc = NULL; - struct dma_chan *chan = host->chan_rx; + struct platform_device *pdev = to_platform_device(dev); + const struct mfd_cell *cell = mfd_get_cell(pdev); int ret; - ret = dma_map_sg(&host->pdev->dev, sg, host->sg_len, DMA_FROM_DEVICE); - if (ret > 0) { - host->dma_sglen = ret; - desc = chan->device->device_prep_slave_sg(chan, sg, ret, - DMA_FROM_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - } - - if (desc) { - host->desc = desc; - desc->callback = tmio_dma_complete; - desc->callback_param = host; - host->cookie = desc->tx_submit(desc); - if (host->cookie < 0) { - host->desc = NULL; - ret = host->cookie; - } else { - chan->device->device_issue_pending(chan); - } - } - dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n", - __func__, host->sg_len, ret, host->cookie, host->mrq); - - if (!host->desc) { - /* DMA failed, fall back to PIO */ - if (ret >= 0) - ret = -EIO; - host->chan_rx = NULL; - dma_release_channel(chan); - /* Free the Tx channel too */ - chan = host->chan_tx; - if (chan) { - host->chan_tx = NULL; - dma_release_channel(chan); - } - dev_warn(&host->pdev->dev, - "DMA failed: %d, falling back to PIO\n", ret); - tmio_mmc_enable_dma(host, false); - reset(host); - /* Fail this request, let above layers recover */ - host->mrq->cmd->error = ret; - tmio_mmc_finish_request(host); - } - - dev_dbg(&host->pdev->dev, "%s(): desc %p, cookie %d, sg[%d]\n", __func__, - desc, host->cookie, host->sg_len); - - return ret > 0 ? 0 : ret; -} - -static int tmio_mmc_start_dma_tx(struct tmio_mmc_host *host) -{ - struct scatterlist *sg = host->sg_ptr; - struct dma_async_tx_descriptor *desc = NULL; - struct dma_chan *chan = host->chan_tx; - int ret; - - ret = dma_map_sg(&host->pdev->dev, sg, host->sg_len, DMA_TO_DEVICE); - if (ret > 0) { - host->dma_sglen = ret; - desc = chan->device->device_prep_slave_sg(chan, sg, ret, - DMA_TO_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - } - - if (desc) { - host->desc = desc; - desc->callback = tmio_dma_complete; - desc->callback_param = host; - host->cookie = desc->tx_submit(desc); - if (host->cookie < 0) { - host->desc = NULL; - ret = host->cookie; - } - } - dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n", - __func__, host->sg_len, ret, host->cookie, host->mrq); - - if (!host->desc) { - /* DMA failed, fall back to PIO */ - if (ret >= 0) - ret = -EIO; - host->chan_tx = NULL; - dma_release_channel(chan); - /* Free the Rx channel too */ - chan = host->chan_rx; - if (chan) { - host->chan_rx = NULL; - dma_release_channel(chan); - } - dev_warn(&host->pdev->dev, - "DMA failed: %d, falling back to PIO\n", ret); - tmio_mmc_enable_dma(host, false); - reset(host); - /* Fail this request, let above layers recover */ - host->mrq->cmd->error = ret; - tmio_mmc_finish_request(host); - } - - dev_dbg(&host->pdev->dev, "%s(): desc %p, cookie %d\n", __func__, - desc, host->cookie); - - return ret > 0 ? 0 : ret; -} - -static int tmio_mmc_start_dma(struct tmio_mmc_host *host, - struct mmc_data *data) -{ - if (data->flags & MMC_DATA_READ) { - if (host->chan_rx) - return tmio_mmc_start_dma_rx(host); - } else { - if (host->chan_tx) - return tmio_mmc_start_dma_tx(host); - } - - return 0; -} - -static void tmio_issue_tasklet_fn(unsigned long priv) -{ - struct tmio_mmc_host *host = (struct tmio_mmc_host *)priv; - struct dma_chan *chan = host->chan_tx; - - chan->device->device_issue_pending(chan); -} - -static void tmio_tasklet_fn(unsigned long arg) -{ - struct tmio_mmc_host *host = (struct tmio_mmc_host *)arg; - - if (host->data->flags & MMC_DATA_READ) - dma_unmap_sg(&host->pdev->dev, host->sg_ptr, host->dma_sglen, - DMA_FROM_DEVICE); - else - dma_unmap_sg(&host->pdev->dev, host->sg_ptr, host->dma_sglen, - DMA_TO_DEVICE); - - tmio_mmc_do_data_irq(host); -} - -/* It might be necessary to make filter MFD specific */ -static bool tmio_mmc_filter(struct dma_chan *chan, void *arg) -{ - dev_dbg(chan->device->dev, "%s: slave data %p\n", __func__, arg); - chan->private = arg; - return true; -} - -static void tmio_mmc_request_dma(struct tmio_mmc_host *host, - struct tmio_mmc_data *pdata) -{ - host->cookie = -EINVAL; - host->desc = NULL; - - /* We can only either use DMA for both Tx and Rx or not use it at all */ - if (pdata->dma) { - dma_cap_mask_t mask; - - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - - host->chan_tx = dma_request_channel(mask, tmio_mmc_filter, - pdata->dma->chan_priv_tx); - dev_dbg(&host->pdev->dev, "%s: TX: got channel %p\n", __func__, - host->chan_tx); - - if (!host->chan_tx) - return; - - host->chan_rx = dma_request_channel(mask, tmio_mmc_filter, - pdata->dma->chan_priv_rx); - dev_dbg(&host->pdev->dev, "%s: RX: got channel %p\n", __func__, - host->chan_rx); - - if (!host->chan_rx) { - dma_release_channel(host->chan_tx); - host->chan_tx = NULL; - return; - } - - tasklet_init(&host->dma_complete, tmio_tasklet_fn, (unsigned long)host); - tasklet_init(&host->dma_issue, tmio_issue_tasklet_fn, (unsigned long)host); - - tmio_mmc_enable_dma(host, true); - } -} - -static void tmio_mmc_release_dma(struct tmio_mmc_host *host) -{ - if (host->chan_tx) { - struct dma_chan *chan = host->chan_tx; - host->chan_tx = NULL; - dma_release_channel(chan); - } - if (host->chan_rx) { - struct dma_chan *chan = host->chan_rx; - host->chan_rx = NULL; - dma_release_channel(chan); - } - - host->cookie = -EINVAL; - host->desc = NULL; -} -#else -static int tmio_mmc_start_dma(struct tmio_mmc_host *host, - struct mmc_data *data) -{ - return 0; -} - -static void tmio_mmc_request_dma(struct tmio_mmc_host *host, - struct tmio_mmc_data *pdata) -{ - host->chan_tx = NULL; - host->chan_rx = NULL; -} - -static void tmio_mmc_release_dma(struct tmio_mmc_host *host) -{ -} -#endif - -static int tmio_mmc_start_data(struct tmio_mmc_host *host, - struct mmc_data *data) -{ - struct mfd_cell *cell = host->pdev->dev.platform_data; - struct tmio_mmc_data *pdata = cell->driver_data; - - pr_debug("setup data transfer: blocksize %08x nr_blocks %d\n", - data->blksz, data->blocks); - - /* Some hardware cannot perform 2 byte requests in 4 bit mode */ - if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) { - int blksz_2bytes = pdata->flags & TMIO_MMC_BLKSZ_2BYTES; - - if (data->blksz < 2 || (data->blksz < 4 && !blksz_2bytes)) { - pr_err("%s: %d byte block unsupported in 4 bit mode\n", - mmc_hostname(host->mmc), data->blksz); - return -EINVAL; - } - } - - tmio_mmc_init_sg(host, data); - host->data = data; - - /* Set transfer length / blocksize */ - sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz); - sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks); - - return tmio_mmc_start_dma(host, data); -} - -/* Process requests from the MMC layer */ -static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) -{ - struct tmio_mmc_host *host = mmc_priv(mmc); - int ret; - - if (host->mrq) - pr_debug("request not null\n"); - - host->mrq = mrq; - - if (mrq->data) { - ret = tmio_mmc_start_data(host, mrq->data); - if (ret) - goto fail; - } - - ret = tmio_mmc_start_command(host, mrq->cmd); - if (!ret) - return; - -fail: - mrq->cmd->error = ret; - mmc_request_done(mmc, mrq); -} - -/* Set MMC clock / power. - * Note: This controller uses a simple divider scheme therefore it cannot - * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as - * MMC wont run that fast, it has to be clocked at 12MHz which is the next - * slowest setting. - */ -static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) -{ - struct tmio_mmc_host *host = mmc_priv(mmc); - - if (ios->clock) - tmio_mmc_set_clock(host, ios->clock); - - /* Power sequence - OFF -> ON -> UP */ - switch (ios->power_mode) { - case MMC_POWER_OFF: /* power down SD bus */ - if (host->set_pwr) - host->set_pwr(host->pdev, 0); - tmio_mmc_clk_stop(host); - break; - case MMC_POWER_ON: /* power up SD bus */ - if (host->set_pwr) - host->set_pwr(host->pdev, 1); - break; - case MMC_POWER_UP: /* start bus clock */ - tmio_mmc_clk_start(host); - break; - } - - switch (ios->bus_width) { - case MMC_BUS_WIDTH_1: - sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0); - break; - case MMC_BUS_WIDTH_4: - sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0); - break; - } - - /* Let things settle. delay taken from winCE driver */ - udelay(140); -} - -static int tmio_mmc_get_ro(struct mmc_host *mmc) -{ - struct tmio_mmc_host *host = mmc_priv(mmc); - struct mfd_cell *cell = host->pdev->dev.platform_data; - struct tmio_mmc_data *pdata = cell->driver_data; - - return ((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) || - (sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT)) ? 0 : 1; -} - -static int tmio_mmc_get_cd(struct mmc_host *mmc) -{ - struct tmio_mmc_host *host = mmc_priv(mmc); - struct mfd_cell *cell = host->pdev->dev.platform_data; - struct tmio_mmc_data *pdata = cell->driver_data; - - if (!pdata->get_cd) - return -ENOSYS; - else - return pdata->get_cd(host->pdev); -} - -static const struct mmc_host_ops tmio_mmc_ops = { - .request = tmio_mmc_request, - .set_ios = tmio_mmc_set_ios, - .get_ro = tmio_mmc_get_ro, - .get_cd = tmio_mmc_get_cd, -}; - -#ifdef CONFIG_PM -static int tmio_mmc_suspend(struct platform_device *dev, pm_message_t state) -{ - struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data; - struct mmc_host *mmc = platform_get_drvdata(dev); - int ret; - - ret = mmc_suspend_host(mmc); + ret = tmio_mmc_host_suspend(dev); /* Tell MFD core it can disable us now.*/ if (!ret && cell->disable) - cell->disable(dev); + cell->disable(pdev); return ret; } -static int tmio_mmc_resume(struct platform_device *dev) +static int tmio_mmc_resume(struct device *dev) { - struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data; - struct mmc_host *mmc = platform_get_drvdata(dev); + struct platform_device *pdev = to_platform_device(dev); + const struct mfd_cell *cell = mfd_get_cell(pdev); int ret = 0; /* Tell the MFD core we are ready to be enabled */ - if (cell->resume) { - ret = cell->resume(dev); - if (ret) - goto out; - } + if (cell->resume) + ret = cell->resume(pdev); - mmc_resume_host(mmc); + if (!ret) + ret = tmio_mmc_host_resume(dev); -out: return ret; } -#else -#define tmio_mmc_suspend NULL -#define tmio_mmc_resume NULL #endif -static int __devinit tmio_mmc_probe(struct platform_device *dev) +static int tmio_mmc_probe(struct platform_device *pdev) { - struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data; + const struct mfd_cell *cell = mfd_get_cell(pdev); struct tmio_mmc_data *pdata; - struct resource *res_ctl; struct tmio_mmc_host *host; - struct mmc_host *mmc; - int ret = -EINVAL; - u32 irq_mask = TMIO_MASK_CMD; + struct resource *res; + int ret = -EINVAL, irq; - if (dev->num_resources != 2) + if (pdev->num_resources != 2) goto out; - res_ctl = platform_get_resource(dev, IORESOURCE_MEM, 0); - if (!res_ctl) - goto out; - - pdata = cell->driver_data; + pdata = pdev->dev.platform_data; if (!pdata || !pdata->hclk) goto out; - ret = -ENOMEM; - - mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &dev->dev); - if (!mmc) + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + ret = irq; goto out; - - host = mmc_priv(mmc); - host->mmc = mmc; - host->pdev = dev; - platform_set_drvdata(dev, mmc); - - host->set_pwr = pdata->set_pwr; - host->set_clk_div = pdata->set_clk_div; - - /* SD control register space size is 0x200, 0x400 for bus_shift=1 */ - host->bus_shift = resource_size(res_ctl) >> 10; - - host->ctl = ioremap(res_ctl->start, resource_size(res_ctl)); - if (!host->ctl) - goto host_free; - - mmc->ops = &tmio_mmc_ops; - mmc->caps = MMC_CAP_4_BIT_DATA; - mmc->caps |= pdata->capabilities; - mmc->f_max = pdata->hclk; - mmc->f_min = mmc->f_max / 512; - if (pdata->ocr_mask) - mmc->ocr_avail = pdata->ocr_mask; - else - mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + } /* Tell the MFD core we are ready to be enabled */ if (cell->enable) { - ret = cell->enable(dev); + ret = cell->enable(pdev); if (ret) - goto unmap_ctl; + goto out; } - tmio_mmc_clk_stop(host); - reset(host); - - ret = platform_get_irq(dev, 0); - if (ret >= 0) - host->irq = ret; - else - goto cell_disable; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; - disable_mmc_irqs(host, TMIO_MASK_ALL); + /* SD control register space size is 0x200, 0x400 for bus_shift=1 */ + pdata->bus_shift = resource_size(res) >> 10; + pdata->flags |= TMIO_MMC_HAVE_HIGH_REG; - ret = request_irq(host->irq, tmio_mmc_irq, IRQF_DISABLED | - IRQF_TRIGGER_FALLING, dev_name(&dev->dev), host); + ret = tmio_mmc_host_probe(&host, pdev, pdata); if (ret) goto cell_disable; - /* See if we also get DMA */ - tmio_mmc_request_dma(host, pdata); - - mmc_add_host(mmc); + ret = request_irq(irq, tmio_mmc_irq, IRQF_TRIGGER_FALLING, + dev_name(&pdev->dev), host); + if (ret) + goto host_remove; pr_info("%s at 0x%08lx irq %d\n", mmc_hostname(host->mmc), - (unsigned long)host->ctl, host->irq); - - /* Unmask the IRQs we want to know about */ - if (!host->chan_rx) - irq_mask |= TMIO_MASK_READOP; - if (!host->chan_tx) - irq_mask |= TMIO_MASK_WRITEOP; - enable_mmc_irqs(host, irq_mask); + (unsigned long)host->ctl, irq); return 0; +host_remove: + tmio_mmc_host_remove(host); cell_disable: if (cell->disable) - cell->disable(dev); -unmap_ctl: - iounmap(host->ctl); -host_free: - mmc_free_host(mmc); + cell->disable(pdev); out: return ret; } -static int __devexit tmio_mmc_remove(struct platform_device *dev) +static int tmio_mmc_remove(struct platform_device *pdev) { - struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data; - struct mmc_host *mmc = platform_get_drvdata(dev); - - platform_set_drvdata(dev, NULL); + const struct mfd_cell *cell = mfd_get_cell(pdev); + struct mmc_host *mmc = platform_get_drvdata(pdev); if (mmc) { struct tmio_mmc_host *host = mmc_priv(mmc); - mmc_remove_host(mmc); - tmio_mmc_release_dma(host); - free_irq(host->irq, host); + free_irq(platform_get_irq(pdev, 0), host); + tmio_mmc_host_remove(host); if (cell->disable) - cell->disable(dev); - iounmap(host->ctl); - mmc_free_host(mmc); + cell->disable(pdev); } return 0; @@ -947,30 +133,21 @@ static int __devexit tmio_mmc_remove(struct platform_device *dev) /* ------------------- device registration ----------------------- */ +static const struct dev_pm_ops tmio_mmc_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(tmio_mmc_suspend, tmio_mmc_resume) +}; + static struct platform_driver tmio_mmc_driver = { .driver = { .name = "tmio-mmc", .owner = THIS_MODULE, + .pm = &tmio_mmc_dev_pm_ops, }, .probe = tmio_mmc_probe, - .remove = __devexit_p(tmio_mmc_remove), - .suspend = tmio_mmc_suspend, - .resume = tmio_mmc_resume, + .remove = tmio_mmc_remove, }; - -static int __init tmio_mmc_init(void) -{ - return platform_driver_register(&tmio_mmc_driver); -} - -static void __exit tmio_mmc_exit(void) -{ - platform_driver_unregister(&tmio_mmc_driver); -} - -module_init(tmio_mmc_init); -module_exit(tmio_mmc_exit); +module_platform_driver(tmio_mmc_driver); MODULE_DESCRIPTION("Toshiba TMIO SD/MMC driver"); MODULE_AUTHOR("Ian Molton <spyro@f2s.com>"); diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h index 0fedc78e3ea..100ffe0b2fa 100644 --- a/drivers/mmc/host/tmio_mmc.h +++ b/drivers/mmc/host/tmio_mmc.h @@ -1,58 +1,33 @@ -/* Definitons for use with the tmio_mmc.c +/* + * linux/drivers/mmc/host/tmio_mmc.h * - * (c) 2004 Ian Molton <spyro@f2s.com> - * (c) 2007 Ian Molton <spyro@f2s.com> + * Copyright (C) 2007 Ian Molton + * Copyright (C) 2004 Ian Molton * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * + * Driver for the MMC / SD / SDIO cell found in: + * + * TC6393XB TC6391XB TC6387XB T7L66XB ASIC3 */ +#ifndef TMIO_MMC_H +#define TMIO_MMC_H + #include <linux/highmem.h> -#include <linux/interrupt.h> -#include <linux/dmaengine.h> - -#define CTL_SD_CMD 0x00 -#define CTL_ARG_REG 0x04 -#define CTL_STOP_INTERNAL_ACTION 0x08 -#define CTL_XFER_BLK_COUNT 0xa -#define CTL_RESPONSE 0x0c -#define CTL_STATUS 0x1c -#define CTL_IRQ_MASK 0x20 -#define CTL_SD_CARD_CLK_CTL 0x24 -#define CTL_SD_XFER_LEN 0x26 -#define CTL_SD_MEM_CARD_OPT 0x28 -#define CTL_SD_ERROR_DETAIL_STATUS 0x2c -#define CTL_SD_DATA_PORT 0x30 -#define CTL_TRANSACTION_CTL 0x34 -#define CTL_RESET_SD 0xe0 -#define CTL_SDIO_REGS 0x100 -#define CTL_CLK_AND_WAIT_CTL 0x138 -#define CTL_RESET_SDIO 0x1e0 - -/* Definitions for values the CTRL_STATUS register can take. */ -#define TMIO_STAT_CMDRESPEND 0x00000001 -#define TMIO_STAT_DATAEND 0x00000004 -#define TMIO_STAT_CARD_REMOVE 0x00000008 -#define TMIO_STAT_CARD_INSERT 0x00000010 -#define TMIO_STAT_SIGSTATE 0x00000020 -#define TMIO_STAT_WRPROTECT 0x00000080 -#define TMIO_STAT_CARD_REMOVE_A 0x00000100 -#define TMIO_STAT_CARD_INSERT_A 0x00000200 -#define TMIO_STAT_SIGSTATE_A 0x00000400 -#define TMIO_STAT_CMD_IDX_ERR 0x00010000 -#define TMIO_STAT_CRCFAIL 0x00020000 -#define TMIO_STAT_STOPBIT_ERR 0x00040000 -#define TMIO_STAT_DATATIMEOUT 0x00080000 -#define TMIO_STAT_RXOVERFLOW 0x00100000 -#define TMIO_STAT_TXUNDERRUN 0x00200000 -#define TMIO_STAT_CMDTIMEOUT 0x00400000 -#define TMIO_STAT_RXRDY 0x01000000 -#define TMIO_STAT_TXRQ 0x02000000 -#define TMIO_STAT_ILL_FUNC 0x20000000 -#define TMIO_STAT_CMD_BUSY 0x40000000 -#define TMIO_STAT_ILL_ACCESS 0x80000000 +#include <linux/mmc/tmio.h> +#include <linux/mutex.h> +#include <linux/pagemap.h> +#include <linux/scatterlist.h> +#include <linux/spinlock.h> + +/* Definitions for values the CTRL_SDIO_STATUS register can take. */ +#define TMIO_SDIO_STAT_IOIRQ 0x0001 +#define TMIO_SDIO_STAT_EXPUB52 0x4000 +#define TMIO_SDIO_STAT_EXWT 0x8000 +#define TMIO_SDIO_MASK_ALL 0xc007 /* Define some IRQ masks */ /* This is the mask used at reset by the chip */ @@ -63,37 +38,33 @@ TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT) #define TMIO_MASK_IRQ (TMIO_MASK_READOP | TMIO_MASK_WRITEOP | TMIO_MASK_CMD) - -#define enable_mmc_irqs(host, i) \ - do { \ - u32 mask;\ - mask = sd_ctrl_read32((host), CTL_IRQ_MASK); \ - mask &= ~((i) & TMIO_MASK_IRQ); \ - sd_ctrl_write32((host), CTL_IRQ_MASK, mask); \ - } while (0) - -#define disable_mmc_irqs(host, i) \ - do { \ - u32 mask;\ - mask = sd_ctrl_read32((host), CTL_IRQ_MASK); \ - mask |= ((i) & TMIO_MASK_IRQ); \ - sd_ctrl_write32((host), CTL_IRQ_MASK, mask); \ - } while (0) - -#define ack_mmc_irqs(host, i) \ - do { \ - sd_ctrl_write32((host), CTL_STATUS, ~(i)); \ - } while (0) - +struct tmio_mmc_data; + +/* + * We differentiate between the following 3 power states: + * 1. card slot powered off, controller stopped. This is used, when either there + * is no card in the slot, or the card really has to be powered down. + * 2. card slot powered on, controller stopped. This is used, when a card is in + * the slot, but no activity is currently taking place. This is a power- + * saving mode with card-state preserved. This state can be entered, e.g. + * when MMC clock-gating is used. + * 3. card slot powered on, controller running. This is the actual active state. + */ +enum tmio_mmc_power { + TMIO_MMC_OFF_STOP, /* card power off, controller stopped */ + TMIO_MMC_ON_STOP, /* card power on, controller stopped */ + TMIO_MMC_ON_RUN, /* card power on, controller running */ +}; struct tmio_mmc_host { void __iomem *ctl; - unsigned long bus_shift; struct mmc_command *cmd; struct mmc_request *mrq; struct mmc_data *data; struct mmc_host *mmc; - int irq; + + /* Controller and card power state */ + enum tmio_mmc_power power; /* Callbacks for clock / power control */ void (*set_pwr)(struct platform_device *host, int state); @@ -101,128 +72,144 @@ struct tmio_mmc_host { /* pio related stuff */ struct scatterlist *sg_ptr; + struct scatterlist *sg_orig; unsigned int sg_len; unsigned int sg_off; struct platform_device *pdev; + struct tmio_mmc_data *pdata; /* DMA support */ + bool force_pio; struct dma_chan *chan_rx; struct dma_chan *chan_tx; struct tasklet_struct dma_complete; struct tasklet_struct dma_issue; -#ifdef CONFIG_TMIO_MMC_DMA - struct dma_async_tx_descriptor *desc; - unsigned int dma_sglen; - dma_cookie_t cookie; -#endif + struct scatterlist bounce_sg; + u8 *bounce_buf; + + /* Track lost interrupts */ + struct delayed_work delayed_reset_work; + struct work_struct done; + + /* Cache IRQ mask */ + u32 sdcard_irq_mask; + u32 sdio_irq_mask; + + spinlock_t lock; /* protect host private data */ + unsigned long last_req_ts; + struct mutex ios_lock; /* protect set_ios() context */ + bool native_hotplug; + bool resuming; }; -#include <linux/io.h> +int tmio_mmc_host_probe(struct tmio_mmc_host **host, + struct platform_device *pdev, + struct tmio_mmc_data *pdata); +void tmio_mmc_host_remove(struct tmio_mmc_host *host); +void tmio_mmc_do_data_irq(struct tmio_mmc_host *host); -static inline u16 sd_ctrl_read16(struct tmio_mmc_host *host, int addr) +void tmio_mmc_enable_mmc_irqs(struct tmio_mmc_host *host, u32 i); +void tmio_mmc_disable_mmc_irqs(struct tmio_mmc_host *host, u32 i); +irqreturn_t tmio_mmc_irq(int irq, void *devid); +irqreturn_t tmio_mmc_sdcard_irq(int irq, void *devid); +irqreturn_t tmio_mmc_card_detect_irq(int irq, void *devid); +irqreturn_t tmio_mmc_sdio_irq(int irq, void *devid); + +static inline char *tmio_mmc_kmap_atomic(struct scatterlist *sg, + unsigned long *flags) { - return readw(host->ctl + (addr << host->bus_shift)); + local_irq_save(*flags); + return kmap_atomic(sg_page(sg)) + sg->offset; } -static inline void sd_ctrl_read16_rep(struct tmio_mmc_host *host, int addr, - u16 *buf, int count) +static inline void tmio_mmc_kunmap_atomic(struct scatterlist *sg, + unsigned long *flags, void *virt) { - readsw(host->ctl + (addr << host->bus_shift), buf, count); + kunmap_atomic(virt - sg->offset); + local_irq_restore(*flags); } -static inline u32 sd_ctrl_read32(struct tmio_mmc_host *host, int addr) +#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) +void tmio_mmc_start_dma(struct tmio_mmc_host *host, struct mmc_data *data); +void tmio_mmc_enable_dma(struct tmio_mmc_host *host, bool enable); +void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdata); +void tmio_mmc_release_dma(struct tmio_mmc_host *host); +void tmio_mmc_abort_dma(struct tmio_mmc_host *host); +#else +static inline void tmio_mmc_start_dma(struct tmio_mmc_host *host, + struct mmc_data *data) { - return readw(host->ctl + (addr << host->bus_shift)) | - readw(host->ctl + ((addr + 2) << host->bus_shift)) << 16; } -static inline void sd_ctrl_write16(struct tmio_mmc_host *host, int addr, - u16 val) +static inline void tmio_mmc_enable_dma(struct tmio_mmc_host *host, bool enable) { - writew(val, host->ctl + (addr << host->bus_shift)); } -static inline void sd_ctrl_write16_rep(struct tmio_mmc_host *host, int addr, - u16 *buf, int count) +static inline void tmio_mmc_request_dma(struct tmio_mmc_host *host, + struct tmio_mmc_data *pdata) { - writesw(host->ctl + (addr << host->bus_shift), buf, count); + host->chan_tx = NULL; + host->chan_rx = NULL; } -static inline void sd_ctrl_write32(struct tmio_mmc_host *host, int addr, - u32 val) +static inline void tmio_mmc_release_dma(struct tmio_mmc_host *host) { - writew(val, host->ctl + (addr << host->bus_shift)); - writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift)); } -#include <linux/scatterlist.h> -#include <linux/blkdev.h> - -static inline void tmio_mmc_init_sg(struct tmio_mmc_host *host, - struct mmc_data *data) +static inline void tmio_mmc_abort_dma(struct tmio_mmc_host *host) { - host->sg_len = data->sg_len; - host->sg_ptr = data->sg; - host->sg_off = 0; } +#endif -static inline int tmio_mmc_next_sg(struct tmio_mmc_host *host) +#ifdef CONFIG_PM_SLEEP +int tmio_mmc_host_suspend(struct device *dev); +int tmio_mmc_host_resume(struct device *dev); +#endif + +#ifdef CONFIG_PM_RUNTIME +int tmio_mmc_host_runtime_suspend(struct device *dev); +int tmio_mmc_host_runtime_resume(struct device *dev); +#endif + +static inline u16 sd_ctrl_read16(struct tmio_mmc_host *host, int addr) { - host->sg_ptr = sg_next(host->sg_ptr); - host->sg_off = 0; - return --host->sg_len; + return readw(host->ctl + (addr << host->pdata->bus_shift)); } -static inline char *tmio_mmc_kmap_atomic(struct scatterlist *sg, - unsigned long *flags) +static inline void sd_ctrl_read16_rep(struct tmio_mmc_host *host, int addr, + u16 *buf, int count) { - local_irq_save(*flags); - return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset; + readsw(host->ctl + (addr << host->pdata->bus_shift), buf, count); } -static inline void tmio_mmc_kunmap_atomic(void *virt, - unsigned long *flags) +static inline u32 sd_ctrl_read32(struct tmio_mmc_host *host, int addr) { - kunmap_atomic(virt, KM_BIO_SRC_IRQ); - local_irq_restore(*flags); + return readw(host->ctl + (addr << host->pdata->bus_shift)) | + readw(host->ctl + ((addr + 2) << host->pdata->bus_shift)) << 16; } -#ifdef CONFIG_MMC_DEBUG +static inline void sd_ctrl_write16(struct tmio_mmc_host *host, int addr, u16 val) +{ + /* If there is a hook and it returns non-zero then there + * is an error and the write should be skipped + */ + if (host->pdata->write16_hook && host->pdata->write16_hook(host, addr)) + return; + writew(val, host->ctl + (addr << host->pdata->bus_shift)); +} -#define STATUS_TO_TEXT(a) \ - do { \ - if (status & TMIO_STAT_##a) \ - printk(#a); \ - } while (0) +static inline void sd_ctrl_write16_rep(struct tmio_mmc_host *host, int addr, + u16 *buf, int count) +{ + writesw(host->ctl + (addr << host->pdata->bus_shift), buf, count); +} -void pr_debug_status(u32 status) +static inline void sd_ctrl_write32(struct tmio_mmc_host *host, int addr, u32 val) { - printk(KERN_DEBUG "status: %08x = ", status); - STATUS_TO_TEXT(CARD_REMOVE); - STATUS_TO_TEXT(CARD_INSERT); - STATUS_TO_TEXT(SIGSTATE); - STATUS_TO_TEXT(WRPROTECT); - STATUS_TO_TEXT(CARD_REMOVE_A); - STATUS_TO_TEXT(CARD_INSERT_A); - STATUS_TO_TEXT(SIGSTATE_A); - STATUS_TO_TEXT(CMD_IDX_ERR); - STATUS_TO_TEXT(STOPBIT_ERR); - STATUS_TO_TEXT(ILL_FUNC); - STATUS_TO_TEXT(CMD_BUSY); - STATUS_TO_TEXT(CMDRESPEND); - STATUS_TO_TEXT(DATAEND); - STATUS_TO_TEXT(CRCFAIL); - STATUS_TO_TEXT(DATATIMEOUT); - STATUS_TO_TEXT(CMDTIMEOUT); - STATUS_TO_TEXT(RXOVERFLOW); - STATUS_TO_TEXT(TXUNDERRUN); - STATUS_TO_TEXT(RXRDY); - STATUS_TO_TEXT(TXRQ); - STATUS_TO_TEXT(ILL_ACCESS); - printk("\n"); + writew(val, host->ctl + (addr << host->pdata->bus_shift)); + writew(val >> 16, host->ctl + ((addr + 2) << host->pdata->bus_shift)); } -#else -#define pr_debug_status(s) do { } while (0) + #endif diff --git a/drivers/mmc/host/tmio_mmc_dma.c b/drivers/mmc/host/tmio_mmc_dma.c new file mode 100644 index 00000000000..03e7b280cb4 --- /dev/null +++ b/drivers/mmc/host/tmio_mmc_dma.c @@ -0,0 +1,358 @@ +/* + * linux/drivers/mmc/tmio_mmc_dma.c + * + * Copyright (C) 2010-2011 Guennadi Liakhovetski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * DMA function for TMIO MMC implementations + */ + +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/dmaengine.h> +#include <linux/mfd/tmio.h> +#include <linux/mmc/host.h> +#include <linux/mmc/tmio.h> +#include <linux/pagemap.h> +#include <linux/scatterlist.h> + +#include "tmio_mmc.h" + +#define TMIO_MMC_MIN_DMA_LEN 8 + +void tmio_mmc_enable_dma(struct tmio_mmc_host *host, bool enable) +{ + if (!host->chan_tx || !host->chan_rx) + return; + +#if defined(CONFIG_SUPERH) || defined(CONFIG_ARCH_SHMOBILE) + /* Switch DMA mode on or off - SuperH specific? */ + sd_ctrl_write16(host, CTL_DMA_ENABLE, enable ? 2 : 0); +#endif +} + +void tmio_mmc_abort_dma(struct tmio_mmc_host *host) +{ + tmio_mmc_enable_dma(host, false); + + if (host->chan_rx) + dmaengine_terminate_all(host->chan_rx); + if (host->chan_tx) + dmaengine_terminate_all(host->chan_tx); + + tmio_mmc_enable_dma(host, true); +} + +static void tmio_mmc_start_dma_rx(struct tmio_mmc_host *host) +{ + struct scatterlist *sg = host->sg_ptr, *sg_tmp; + struct dma_async_tx_descriptor *desc = NULL; + struct dma_chan *chan = host->chan_rx; + struct tmio_mmc_data *pdata = host->pdata; + dma_cookie_t cookie; + int ret, i; + bool aligned = true, multiple = true; + unsigned int align = (1 << pdata->dma->alignment_shift) - 1; + + for_each_sg(sg, sg_tmp, host->sg_len, i) { + if (sg_tmp->offset & align) + aligned = false; + if (sg_tmp->length & align) { + multiple = false; + break; + } + } + + if ((!aligned && (host->sg_len > 1 || sg->length > PAGE_CACHE_SIZE || + (align & PAGE_MASK))) || !multiple) { + ret = -EINVAL; + goto pio; + } + + if (sg->length < TMIO_MMC_MIN_DMA_LEN) { + host->force_pio = true; + return; + } + + tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_RXRDY); + + /* The only sg element can be unaligned, use our bounce buffer then */ + if (!aligned) { + sg_init_one(&host->bounce_sg, host->bounce_buf, sg->length); + host->sg_ptr = &host->bounce_sg; + sg = host->sg_ptr; + } + + ret = dma_map_sg(chan->device->dev, sg, host->sg_len, DMA_FROM_DEVICE); + if (ret > 0) + desc = dmaengine_prep_slave_sg(chan, sg, ret, + DMA_DEV_TO_MEM, DMA_CTRL_ACK); + + if (desc) { + cookie = dmaengine_submit(desc); + if (cookie < 0) { + desc = NULL; + ret = cookie; + } + } + dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n", + __func__, host->sg_len, ret, cookie, host->mrq); + +pio: + if (!desc) { + /* DMA failed, fall back to PIO */ + tmio_mmc_enable_dma(host, false); + if (ret >= 0) + ret = -EIO; + host->chan_rx = NULL; + dma_release_channel(chan); + /* Free the Tx channel too */ + chan = host->chan_tx; + if (chan) { + host->chan_tx = NULL; + dma_release_channel(chan); + } + dev_warn(&host->pdev->dev, + "DMA failed: %d, falling back to PIO\n", ret); + } + + dev_dbg(&host->pdev->dev, "%s(): desc %p, cookie %d, sg[%d]\n", __func__, + desc, cookie, host->sg_len); +} + +static void tmio_mmc_start_dma_tx(struct tmio_mmc_host *host) +{ + struct scatterlist *sg = host->sg_ptr, *sg_tmp; + struct dma_async_tx_descriptor *desc = NULL; + struct dma_chan *chan = host->chan_tx; + struct tmio_mmc_data *pdata = host->pdata; + dma_cookie_t cookie; + int ret, i; + bool aligned = true, multiple = true; + unsigned int align = (1 << pdata->dma->alignment_shift) - 1; + + for_each_sg(sg, sg_tmp, host->sg_len, i) { + if (sg_tmp->offset & align) + aligned = false; + if (sg_tmp->length & align) { + multiple = false; + break; + } + } + + if ((!aligned && (host->sg_len > 1 || sg->length > PAGE_CACHE_SIZE || + (align & PAGE_MASK))) || !multiple) { + ret = -EINVAL; + goto pio; + } + + if (sg->length < TMIO_MMC_MIN_DMA_LEN) { + host->force_pio = true; + return; + } + + tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_TXRQ); + + /* The only sg element can be unaligned, use our bounce buffer then */ + if (!aligned) { + unsigned long flags; + void *sg_vaddr = tmio_mmc_kmap_atomic(sg, &flags); + sg_init_one(&host->bounce_sg, host->bounce_buf, sg->length); + memcpy(host->bounce_buf, sg_vaddr, host->bounce_sg.length); + tmio_mmc_kunmap_atomic(sg, &flags, sg_vaddr); + host->sg_ptr = &host->bounce_sg; + sg = host->sg_ptr; + } + + ret = dma_map_sg(chan->device->dev, sg, host->sg_len, DMA_TO_DEVICE); + if (ret > 0) + desc = dmaengine_prep_slave_sg(chan, sg, ret, + DMA_MEM_TO_DEV, DMA_CTRL_ACK); + + if (desc) { + cookie = dmaengine_submit(desc); + if (cookie < 0) { + desc = NULL; + ret = cookie; + } + } + dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n", + __func__, host->sg_len, ret, cookie, host->mrq); + +pio: + if (!desc) { + /* DMA failed, fall back to PIO */ + tmio_mmc_enable_dma(host, false); + if (ret >= 0) + ret = -EIO; + host->chan_tx = NULL; + dma_release_channel(chan); + /* Free the Rx channel too */ + chan = host->chan_rx; + if (chan) { + host->chan_rx = NULL; + dma_release_channel(chan); + } + dev_warn(&host->pdev->dev, + "DMA failed: %d, falling back to PIO\n", ret); + } + + dev_dbg(&host->pdev->dev, "%s(): desc %p, cookie %d\n", __func__, + desc, cookie); +} + +void tmio_mmc_start_dma(struct tmio_mmc_host *host, + struct mmc_data *data) +{ + if (data->flags & MMC_DATA_READ) { + if (host->chan_rx) + tmio_mmc_start_dma_rx(host); + } else { + if (host->chan_tx) + tmio_mmc_start_dma_tx(host); + } +} + +static void tmio_mmc_issue_tasklet_fn(unsigned long priv) +{ + struct tmio_mmc_host *host = (struct tmio_mmc_host *)priv; + struct dma_chan *chan = NULL; + + spin_lock_irq(&host->lock); + + if (host && host->data) { + if (host->data->flags & MMC_DATA_READ) + chan = host->chan_rx; + else + chan = host->chan_tx; + } + + spin_unlock_irq(&host->lock); + + tmio_mmc_enable_mmc_irqs(host, TMIO_STAT_DATAEND); + + if (chan) + dma_async_issue_pending(chan); +} + +static void tmio_mmc_tasklet_fn(unsigned long arg) +{ + struct tmio_mmc_host *host = (struct tmio_mmc_host *)arg; + + spin_lock_irq(&host->lock); + + if (!host->data) + goto out; + + if (host->data->flags & MMC_DATA_READ) + dma_unmap_sg(host->chan_rx->device->dev, + host->sg_ptr, host->sg_len, + DMA_FROM_DEVICE); + else + dma_unmap_sg(host->chan_tx->device->dev, + host->sg_ptr, host->sg_len, + DMA_TO_DEVICE); + + tmio_mmc_do_data_irq(host); +out: + spin_unlock_irq(&host->lock); +} + +void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdata) +{ + /* We can only either use DMA for both Tx and Rx or not use it at all */ + if (!pdata->dma || (!host->pdev->dev.of_node && + (!pdata->dma->chan_priv_tx || !pdata->dma->chan_priv_rx))) + return; + + if (!host->chan_tx && !host->chan_rx) { + struct resource *res = platform_get_resource(host->pdev, + IORESOURCE_MEM, 0); + struct dma_slave_config cfg = {}; + dma_cap_mask_t mask; + int ret; + + if (!res) + return; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + host->chan_tx = dma_request_slave_channel_compat(mask, + pdata->dma->filter, pdata->dma->chan_priv_tx, + &host->pdev->dev, "tx"); + dev_dbg(&host->pdev->dev, "%s: TX: got channel %p\n", __func__, + host->chan_tx); + + if (!host->chan_tx) + return; + + if (pdata->dma->chan_priv_tx) + cfg.slave_id = pdata->dma->slave_id_tx; + cfg.direction = DMA_MEM_TO_DEV; + cfg.dst_addr = res->start + (CTL_SD_DATA_PORT << host->pdata->bus_shift); + cfg.src_addr = 0; + ret = dmaengine_slave_config(host->chan_tx, &cfg); + if (ret < 0) + goto ecfgtx; + + host->chan_rx = dma_request_slave_channel_compat(mask, + pdata->dma->filter, pdata->dma->chan_priv_rx, + &host->pdev->dev, "rx"); + dev_dbg(&host->pdev->dev, "%s: RX: got channel %p\n", __func__, + host->chan_rx); + + if (!host->chan_rx) + goto ereqrx; + + if (pdata->dma->chan_priv_rx) + cfg.slave_id = pdata->dma->slave_id_rx; + cfg.direction = DMA_DEV_TO_MEM; + cfg.src_addr = cfg.dst_addr; + cfg.dst_addr = 0; + ret = dmaengine_slave_config(host->chan_rx, &cfg); + if (ret < 0) + goto ecfgrx; + + host->bounce_buf = (u8 *)__get_free_page(GFP_KERNEL | GFP_DMA); + if (!host->bounce_buf) + goto ebouncebuf; + + tasklet_init(&host->dma_complete, tmio_mmc_tasklet_fn, (unsigned long)host); + tasklet_init(&host->dma_issue, tmio_mmc_issue_tasklet_fn, (unsigned long)host); + } + + tmio_mmc_enable_dma(host, true); + + return; + +ebouncebuf: +ecfgrx: + dma_release_channel(host->chan_rx); + host->chan_rx = NULL; +ereqrx: +ecfgtx: + dma_release_channel(host->chan_tx); + host->chan_tx = NULL; +} + +void tmio_mmc_release_dma(struct tmio_mmc_host *host) +{ + if (host->chan_tx) { + struct dma_chan *chan = host->chan_tx; + host->chan_tx = NULL; + dma_release_channel(chan); + } + if (host->chan_rx) { + struct dma_chan *chan = host->chan_rx; + host->chan_rx = NULL; + dma_release_channel(chan); + } + if (host->bounce_buf) { + free_pages((unsigned long)host->bounce_buf, 0); + host->bounce_buf = NULL; + } +} diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c new file mode 100644 index 00000000000..faf0924e71c --- /dev/null +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -0,0 +1,1189 @@ +/* + * linux/drivers/mmc/host/tmio_mmc_pio.c + * + * Copyright (C) 2011 Guennadi Liakhovetski + * Copyright (C) 2007 Ian Molton + * Copyright (C) 2004 Ian Molton + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Driver for the MMC / SD / SDIO IP found in: + * + * TC6393XB, TC6391XB, TC6387XB, T7L66XB, ASIC3, SH-Mobile SoCs + * + * This driver draws mainly on scattered spec sheets, Reverse engineering + * of the toshiba e800 SD driver and some parts of the 2.4 ASIC3 driver (4 bit + * support). (Further 4 bit support from a later datasheet). + * + * TODO: + * Investigate using a workqueue for PIO transfers + * Eliminate FIXMEs + * SDIO support + * Better Power management + * Handle MMC errors better + * double buffer support + * + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/highmem.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/mfd/tmio.h> +#include <linux/mmc/host.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/slot-gpio.h> +#include <linux/mmc/tmio.h> +#include <linux/module.h> +#include <linux/pagemap.h> +#include <linux/platform_device.h> +#include <linux/pm_qos.h> +#include <linux/pm_runtime.h> +#include <linux/regulator/consumer.h> +#include <linux/scatterlist.h> +#include <linux/spinlock.h> +#include <linux/workqueue.h> + +#include "tmio_mmc.h" + +void tmio_mmc_enable_mmc_irqs(struct tmio_mmc_host *host, u32 i) +{ + host->sdcard_irq_mask &= ~(i & TMIO_MASK_IRQ); + sd_ctrl_write32(host, CTL_IRQ_MASK, host->sdcard_irq_mask); +} + +void tmio_mmc_disable_mmc_irqs(struct tmio_mmc_host *host, u32 i) +{ + host->sdcard_irq_mask |= (i & TMIO_MASK_IRQ); + sd_ctrl_write32(host, CTL_IRQ_MASK, host->sdcard_irq_mask); +} + +static void tmio_mmc_ack_mmc_irqs(struct tmio_mmc_host *host, u32 i) +{ + sd_ctrl_write32(host, CTL_STATUS, ~i); +} + +static void tmio_mmc_init_sg(struct tmio_mmc_host *host, struct mmc_data *data) +{ + host->sg_len = data->sg_len; + host->sg_ptr = data->sg; + host->sg_orig = data->sg; + host->sg_off = 0; +} + +static int tmio_mmc_next_sg(struct tmio_mmc_host *host) +{ + host->sg_ptr = sg_next(host->sg_ptr); + host->sg_off = 0; + return --host->sg_len; +} + +#ifdef CONFIG_MMC_DEBUG + +#define STATUS_TO_TEXT(a, status, i) \ + do { \ + if (status & TMIO_STAT_##a) { \ + if (i++) \ + printk(" | "); \ + printk(#a); \ + } \ + } while (0) + +static void pr_debug_status(u32 status) +{ + int i = 0; + pr_debug("status: %08x = ", status); + STATUS_TO_TEXT(CARD_REMOVE, status, i); + STATUS_TO_TEXT(CARD_INSERT, status, i); + STATUS_TO_TEXT(SIGSTATE, status, i); + STATUS_TO_TEXT(WRPROTECT, status, i); + STATUS_TO_TEXT(CARD_REMOVE_A, status, i); + STATUS_TO_TEXT(CARD_INSERT_A, status, i); + STATUS_TO_TEXT(SIGSTATE_A, status, i); + STATUS_TO_TEXT(CMD_IDX_ERR, status, i); + STATUS_TO_TEXT(STOPBIT_ERR, status, i); + STATUS_TO_TEXT(ILL_FUNC, status, i); + STATUS_TO_TEXT(CMD_BUSY, status, i); + STATUS_TO_TEXT(CMDRESPEND, status, i); + STATUS_TO_TEXT(DATAEND, status, i); + STATUS_TO_TEXT(CRCFAIL, status, i); + STATUS_TO_TEXT(DATATIMEOUT, status, i); + STATUS_TO_TEXT(CMDTIMEOUT, status, i); + STATUS_TO_TEXT(RXOVERFLOW, status, i); + STATUS_TO_TEXT(TXUNDERRUN, status, i); + STATUS_TO_TEXT(RXRDY, status, i); + STATUS_TO_TEXT(TXRQ, status, i); + STATUS_TO_TEXT(ILL_ACCESS, status, i); + printk("\n"); +} + +#else +#define pr_debug_status(s) do { } while (0) +#endif + +static void tmio_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) +{ + struct tmio_mmc_host *host = mmc_priv(mmc); + + if (enable) { + host->sdio_irq_mask = TMIO_SDIO_MASK_ALL & + ~TMIO_SDIO_STAT_IOIRQ; + sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001); + sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask); + } else { + host->sdio_irq_mask = TMIO_SDIO_MASK_ALL; + sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask); + sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0000); + } +} + +static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock) +{ + u32 clk = 0, clock; + + if (new_clock) { + for (clock = host->mmc->f_min, clk = 0x80000080; + new_clock >= (clock<<1); clk >>= 1) + clock <<= 1; + clk |= 0x100; + } + + if (host->set_clk_div) + host->set_clk_div(host->pdev, (clk>>22) & 1); + + sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff); + msleep(10); +} + +static void tmio_mmc_clk_stop(struct tmio_mmc_host *host) +{ + /* implicit BUG_ON(!res) */ + if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG) { + sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000); + msleep(10); + } + + sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~0x0100 & + sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); + msleep(10); +} + +static void tmio_mmc_clk_start(struct tmio_mmc_host *host) +{ + sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, 0x0100 | + sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); + msleep(10); + + /* implicit BUG_ON(!res) */ + if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG) { + sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100); + msleep(10); + } +} + +static void tmio_mmc_reset(struct tmio_mmc_host *host) +{ + /* FIXME - should we set stop clock reg here */ + sd_ctrl_write16(host, CTL_RESET_SD, 0x0000); + /* implicit BUG_ON(!res) */ + if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG) + sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000); + msleep(10); + sd_ctrl_write16(host, CTL_RESET_SD, 0x0001); + if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG) + sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001); + msleep(10); +} + +static void tmio_mmc_reset_work(struct work_struct *work) +{ + struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host, + delayed_reset_work.work); + struct mmc_request *mrq; + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + mrq = host->mrq; + + /* + * is request already finished? Since we use a non-blocking + * cancel_delayed_work(), it can happen, that a .set_ios() call preempts + * us, so, have to check for IS_ERR(host->mrq) + */ + if (IS_ERR_OR_NULL(mrq) + || time_is_after_jiffies(host->last_req_ts + + msecs_to_jiffies(2000))) { + spin_unlock_irqrestore(&host->lock, flags); + return; + } + + dev_warn(&host->pdev->dev, + "timeout waiting for hardware interrupt (CMD%u)\n", + mrq->cmd->opcode); + + if (host->data) + host->data->error = -ETIMEDOUT; + else if (host->cmd) + host->cmd->error = -ETIMEDOUT; + else + mrq->cmd->error = -ETIMEDOUT; + + host->cmd = NULL; + host->data = NULL; + host->force_pio = false; + + spin_unlock_irqrestore(&host->lock, flags); + + tmio_mmc_reset(host); + + /* Ready for new calls */ + host->mrq = NULL; + + tmio_mmc_abort_dma(host); + mmc_request_done(host->mmc, mrq); +} + +/* called with host->lock held, interrupts disabled */ +static void tmio_mmc_finish_request(struct tmio_mmc_host *host) +{ + struct mmc_request *mrq; + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + + mrq = host->mrq; + if (IS_ERR_OR_NULL(mrq)) { + spin_unlock_irqrestore(&host->lock, flags); + return; + } + + host->cmd = NULL; + host->data = NULL; + host->force_pio = false; + + cancel_delayed_work(&host->delayed_reset_work); + + host->mrq = NULL; + spin_unlock_irqrestore(&host->lock, flags); + + if (mrq->cmd->error || (mrq->data && mrq->data->error)) + tmio_mmc_abort_dma(host); + + mmc_request_done(host->mmc, mrq); +} + +static void tmio_mmc_done_work(struct work_struct *work) +{ + struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host, + done); + tmio_mmc_finish_request(host); +} + +/* These are the bitmasks the tmio chip requires to implement the MMC response + * types. Note that R1 and R6 are the same in this scheme. */ +#define APP_CMD 0x0040 +#define RESP_NONE 0x0300 +#define RESP_R1 0x0400 +#define RESP_R1B 0x0500 +#define RESP_R2 0x0600 +#define RESP_R3 0x0700 +#define DATA_PRESENT 0x0800 +#define TRANSFER_READ 0x1000 +#define TRANSFER_MULTI 0x2000 +#define SECURITY_CMD 0x4000 + +static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd) +{ + struct mmc_data *data = host->data; + int c = cmd->opcode; + u32 irq_mask = TMIO_MASK_CMD; + + /* CMD12 is handled by hardware */ + if (cmd->opcode == MMC_STOP_TRANSMISSION && !cmd->arg) { + sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x001); + return 0; + } + + switch (mmc_resp_type(cmd)) { + case MMC_RSP_NONE: c |= RESP_NONE; break; + case MMC_RSP_R1: c |= RESP_R1; break; + case MMC_RSP_R1B: c |= RESP_R1B; break; + case MMC_RSP_R2: c |= RESP_R2; break; + case MMC_RSP_R3: c |= RESP_R3; break; + default: + pr_debug("Unknown response type %d\n", mmc_resp_type(cmd)); + return -EINVAL; + } + + host->cmd = cmd; + +/* FIXME - this seems to be ok commented out but the spec suggest this bit + * should be set when issuing app commands. + * if(cmd->flags & MMC_FLAG_ACMD) + * c |= APP_CMD; + */ + if (data) { + c |= DATA_PRESENT; + if (data->blocks > 1) { + sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x100); + c |= TRANSFER_MULTI; + } + if (data->flags & MMC_DATA_READ) + c |= TRANSFER_READ; + } + + if (!host->native_hotplug) + irq_mask &= ~(TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT); + tmio_mmc_enable_mmc_irqs(host, irq_mask); + + /* Fire off the command */ + sd_ctrl_write32(host, CTL_ARG_REG, cmd->arg); + sd_ctrl_write16(host, CTL_SD_CMD, c); + + return 0; +} + +/* + * This chip always returns (at least?) as much data as you ask for. + * I'm unsure what happens if you ask for less than a block. This should be + * looked into to ensure that a funny length read doesn't hose the controller. + */ +static void tmio_mmc_pio_irq(struct tmio_mmc_host *host) +{ + struct mmc_data *data = host->data; + void *sg_virt; + unsigned short *buf; + unsigned int count; + unsigned long flags; + + if ((host->chan_tx || host->chan_rx) && !host->force_pio) { + pr_err("PIO IRQ in DMA mode!\n"); + return; + } else if (!data) { + pr_debug("Spurious PIO IRQ\n"); + return; + } + + sg_virt = tmio_mmc_kmap_atomic(host->sg_ptr, &flags); + buf = (unsigned short *)(sg_virt + host->sg_off); + + count = host->sg_ptr->length - host->sg_off; + if (count > data->blksz) + count = data->blksz; + + pr_debug("count: %08x offset: %08x flags %08x\n", + count, host->sg_off, data->flags); + + /* Transfer the data */ + if (data->flags & MMC_DATA_READ) + sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1); + else + sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1); + + host->sg_off += count; + + tmio_mmc_kunmap_atomic(host->sg_ptr, &flags, sg_virt); + + if (host->sg_off == host->sg_ptr->length) + tmio_mmc_next_sg(host); + + return; +} + +static void tmio_mmc_check_bounce_buffer(struct tmio_mmc_host *host) +{ + if (host->sg_ptr == &host->bounce_sg) { + unsigned long flags; + void *sg_vaddr = tmio_mmc_kmap_atomic(host->sg_orig, &flags); + memcpy(sg_vaddr, host->bounce_buf, host->bounce_sg.length); + tmio_mmc_kunmap_atomic(host->sg_orig, &flags, sg_vaddr); + } +} + +/* needs to be called with host->lock held */ +void tmio_mmc_do_data_irq(struct tmio_mmc_host *host) +{ + struct mmc_data *data = host->data; + struct mmc_command *stop; + + host->data = NULL; + + if (!data) { + dev_warn(&host->pdev->dev, "Spurious data end IRQ\n"); + return; + } + stop = data->stop; + + /* FIXME - return correct transfer count on errors */ + if (!data->error) + data->bytes_xfered = data->blocks * data->blksz; + else + data->bytes_xfered = 0; + + pr_debug("Completed data request\n"); + + /* + * FIXME: other drivers allow an optional stop command of any given type + * which we dont do, as the chip can auto generate them. + * Perhaps we can be smarter about when to use auto CMD12 and + * only issue the auto request when we know this is the desired + * stop command, allowing fallback to the stop command the + * upper layers expect. For now, we do what works. + */ + + if (data->flags & MMC_DATA_READ) { + if (host->chan_rx && !host->force_pio) + tmio_mmc_check_bounce_buffer(host); + dev_dbg(&host->pdev->dev, "Complete Rx request %p\n", + host->mrq); + } else { + dev_dbg(&host->pdev->dev, "Complete Tx request %p\n", + host->mrq); + } + + if (stop) { + if (stop->opcode == MMC_STOP_TRANSMISSION && !stop->arg) + sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x000); + else + BUG(); + } + + schedule_work(&host->done); +} + +static void tmio_mmc_data_irq(struct tmio_mmc_host *host) +{ + struct mmc_data *data; + spin_lock(&host->lock); + data = host->data; + + if (!data) + goto out; + + if (host->chan_tx && (data->flags & MMC_DATA_WRITE) && !host->force_pio) { + /* + * Has all data been written out yet? Testing on SuperH showed, + * that in most cases the first interrupt comes already with the + * BUSY status bit clear, but on some operations, like mount or + * in the beginning of a write / sync / umount, there is one + * DATAEND interrupt with the BUSY bit set, in this cases + * waiting for one more interrupt fixes the problem. + */ + if (!(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_CMD_BUSY)) { + tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND); + tasklet_schedule(&host->dma_complete); + } + } else if (host->chan_rx && (data->flags & MMC_DATA_READ) && !host->force_pio) { + tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND); + tasklet_schedule(&host->dma_complete); + } else { + tmio_mmc_do_data_irq(host); + tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_READOP | TMIO_MASK_WRITEOP); + } +out: + spin_unlock(&host->lock); +} + +static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, + unsigned int stat) +{ + struct mmc_command *cmd = host->cmd; + int i, addr; + + spin_lock(&host->lock); + + if (!host->cmd) { + pr_debug("Spurious CMD irq\n"); + goto out; + } + + host->cmd = NULL; + + /* This controller is sicker than the PXA one. Not only do we need to + * drop the top 8 bits of the first response word, we also need to + * modify the order of the response for short response command types. + */ + + for (i = 3, addr = CTL_RESPONSE ; i >= 0 ; i--, addr += 4) + cmd->resp[i] = sd_ctrl_read32(host, addr); + + if (cmd->flags & MMC_RSP_136) { + cmd->resp[0] = (cmd->resp[0] << 8) | (cmd->resp[1] >> 24); + cmd->resp[1] = (cmd->resp[1] << 8) | (cmd->resp[2] >> 24); + cmd->resp[2] = (cmd->resp[2] << 8) | (cmd->resp[3] >> 24); + cmd->resp[3] <<= 8; + } else if (cmd->flags & MMC_RSP_R3) { + cmd->resp[0] = cmd->resp[3]; + } + + if (stat & TMIO_STAT_CMDTIMEOUT) + cmd->error = -ETIMEDOUT; + else if (stat & TMIO_STAT_CRCFAIL && cmd->flags & MMC_RSP_CRC) + cmd->error = -EILSEQ; + + /* If there is data to handle we enable data IRQs here, and + * we will ultimatley finish the request in the data_end handler. + * If theres no data or we encountered an error, finish now. + */ + if (host->data && !cmd->error) { + if (host->data->flags & MMC_DATA_READ) { + if (host->force_pio || !host->chan_rx) + tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_READOP); + else + tasklet_schedule(&host->dma_issue); + } else { + if (host->force_pio || !host->chan_tx) + tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_WRITEOP); + else + tasklet_schedule(&host->dma_issue); + } + } else { + schedule_work(&host->done); + } + +out: + spin_unlock(&host->lock); +} + +static void tmio_mmc_card_irq_status(struct tmio_mmc_host *host, + int *ireg, int *status) +{ + *status = sd_ctrl_read32(host, CTL_STATUS); + *ireg = *status & TMIO_MASK_IRQ & ~host->sdcard_irq_mask; + + pr_debug_status(*status); + pr_debug_status(*ireg); +} + +static bool __tmio_mmc_card_detect_irq(struct tmio_mmc_host *host, + int ireg, int status) +{ + struct mmc_host *mmc = host->mmc; + + /* Card insert / remove attempts */ + if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) { + tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_CARD_INSERT | + TMIO_STAT_CARD_REMOVE); + if ((((ireg & TMIO_STAT_CARD_REMOVE) && mmc->card) || + ((ireg & TMIO_STAT_CARD_INSERT) && !mmc->card)) && + !work_pending(&mmc->detect.work)) + mmc_detect_change(host->mmc, msecs_to_jiffies(100)); + return true; + } + + return false; +} + +irqreturn_t tmio_mmc_card_detect_irq(int irq, void *devid) +{ + unsigned int ireg, status; + struct tmio_mmc_host *host = devid; + + tmio_mmc_card_irq_status(host, &ireg, &status); + __tmio_mmc_card_detect_irq(host, ireg, status); + + return IRQ_HANDLED; +} +EXPORT_SYMBOL(tmio_mmc_card_detect_irq); + +static bool __tmio_mmc_sdcard_irq(struct tmio_mmc_host *host, + int ireg, int status) +{ + /* Command completion */ + if (ireg & (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT)) { + tmio_mmc_ack_mmc_irqs(host, + TMIO_STAT_CMDRESPEND | + TMIO_STAT_CMDTIMEOUT); + tmio_mmc_cmd_irq(host, status); + return true; + } + + /* Data transfer */ + if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) { + tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ); + tmio_mmc_pio_irq(host); + return true; + } + + /* Data transfer completion */ + if (ireg & TMIO_STAT_DATAEND) { + tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_DATAEND); + tmio_mmc_data_irq(host); + return true; + } + + return false; +} + +irqreturn_t tmio_mmc_sdcard_irq(int irq, void *devid) +{ + unsigned int ireg, status; + struct tmio_mmc_host *host = devid; + + tmio_mmc_card_irq_status(host, &ireg, &status); + __tmio_mmc_sdcard_irq(host, ireg, status); + + return IRQ_HANDLED; +} +EXPORT_SYMBOL(tmio_mmc_sdcard_irq); + +irqreturn_t tmio_mmc_sdio_irq(int irq, void *devid) +{ + struct tmio_mmc_host *host = devid; + struct mmc_host *mmc = host->mmc; + struct tmio_mmc_data *pdata = host->pdata; + unsigned int ireg, status; + + if (!(pdata->flags & TMIO_MMC_SDIO_IRQ)) + return IRQ_HANDLED; + + status = sd_ctrl_read16(host, CTL_SDIO_STATUS); + ireg = status & TMIO_SDIO_MASK_ALL & ~host->sdcard_irq_mask; + + sd_ctrl_write16(host, CTL_SDIO_STATUS, status & ~TMIO_SDIO_MASK_ALL); + + if (mmc->caps & MMC_CAP_SDIO_IRQ && ireg & TMIO_SDIO_STAT_IOIRQ) + mmc_signal_sdio_irq(mmc); + + return IRQ_HANDLED; +} +EXPORT_SYMBOL(tmio_mmc_sdio_irq); + +irqreturn_t tmio_mmc_irq(int irq, void *devid) +{ + struct tmio_mmc_host *host = devid; + unsigned int ireg, status; + + pr_debug("MMC IRQ begin\n"); + + tmio_mmc_card_irq_status(host, &ireg, &status); + if (__tmio_mmc_card_detect_irq(host, ireg, status)) + return IRQ_HANDLED; + if (__tmio_mmc_sdcard_irq(host, ireg, status)) + return IRQ_HANDLED; + + tmio_mmc_sdio_irq(irq, devid); + + return IRQ_HANDLED; +} +EXPORT_SYMBOL(tmio_mmc_irq); + +static int tmio_mmc_start_data(struct tmio_mmc_host *host, + struct mmc_data *data) +{ + struct tmio_mmc_data *pdata = host->pdata; + + pr_debug("setup data transfer: blocksize %08x nr_blocks %d\n", + data->blksz, data->blocks); + + /* Some hardware cannot perform 2 byte requests in 4 bit mode */ + if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) { + int blksz_2bytes = pdata->flags & TMIO_MMC_BLKSZ_2BYTES; + + if (data->blksz < 2 || (data->blksz < 4 && !blksz_2bytes)) { + pr_err("%s: %d byte block unsupported in 4 bit mode\n", + mmc_hostname(host->mmc), data->blksz); + return -EINVAL; + } + } + + tmio_mmc_init_sg(host, data); + host->data = data; + + /* Set transfer length / blocksize */ + sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz); + sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks); + + tmio_mmc_start_dma(host, data); + + return 0; +} + +/* Process requests from the MMC layer */ +static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct tmio_mmc_host *host = mmc_priv(mmc); + unsigned long flags; + int ret; + + spin_lock_irqsave(&host->lock, flags); + + if (host->mrq) { + pr_debug("request not null\n"); + if (IS_ERR(host->mrq)) { + spin_unlock_irqrestore(&host->lock, flags); + mrq->cmd->error = -EAGAIN; + mmc_request_done(mmc, mrq); + return; + } + } + + host->last_req_ts = jiffies; + wmb(); + host->mrq = mrq; + + spin_unlock_irqrestore(&host->lock, flags); + + if (mrq->data) { + ret = tmio_mmc_start_data(host, mrq->data); + if (ret) + goto fail; + } + + ret = tmio_mmc_start_command(host, mrq->cmd); + if (!ret) { + schedule_delayed_work(&host->delayed_reset_work, + msecs_to_jiffies(2000)); + return; + } + +fail: + host->force_pio = false; + host->mrq = NULL; + mrq->cmd->error = ret; + mmc_request_done(mmc, mrq); +} + +static int tmio_mmc_clk_update(struct mmc_host *mmc) +{ + struct tmio_mmc_host *host = mmc_priv(mmc); + struct tmio_mmc_data *pdata = host->pdata; + int ret; + + if (!pdata->clk_enable) + return -ENOTSUPP; + + ret = pdata->clk_enable(host->pdev, &mmc->f_max); + if (!ret) + mmc->f_min = mmc->f_max / 512; + + return ret; +} + +static void tmio_mmc_power_on(struct tmio_mmc_host *host, unsigned short vdd) +{ + struct mmc_host *mmc = host->mmc; + int ret = 0; + + /* .set_ios() is returning void, so, no chance to report an error */ + + if (host->set_pwr) + host->set_pwr(host->pdev, 1); + + if (!IS_ERR(mmc->supply.vmmc)) { + ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd); + /* + * Attention: empiric value. With a b43 WiFi SDIO card this + * delay proved necessary for reliable card-insertion probing. + * 100us were not enough. Is this the same 140us delay, as in + * tmio_mmc_set_ios()? + */ + udelay(200); + } + /* + * It seems, VccQ should be switched on after Vcc, this is also what the + * omap_hsmmc.c driver does. + */ + if (!IS_ERR(mmc->supply.vqmmc) && !ret) { + ret = regulator_enable(mmc->supply.vqmmc); + udelay(200); + } + + if (ret < 0) + dev_dbg(&host->pdev->dev, "Regulators failed to power up: %d\n", + ret); +} + +static void tmio_mmc_power_off(struct tmio_mmc_host *host) +{ + struct mmc_host *mmc = host->mmc; + + if (!IS_ERR(mmc->supply.vqmmc)) + regulator_disable(mmc->supply.vqmmc); + + if (!IS_ERR(mmc->supply.vmmc)) + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); + + if (host->set_pwr) + host->set_pwr(host->pdev, 0); +} + +/* Set MMC clock / power. + * Note: This controller uses a simple divider scheme therefore it cannot + * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as + * MMC wont run that fast, it has to be clocked at 12MHz which is the next + * slowest setting. + */ +static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct tmio_mmc_host *host = mmc_priv(mmc); + struct device *dev = &host->pdev->dev; + unsigned long flags; + + mutex_lock(&host->ios_lock); + + spin_lock_irqsave(&host->lock, flags); + if (host->mrq) { + if (IS_ERR(host->mrq)) { + dev_dbg(dev, + "%s.%d: concurrent .set_ios(), clk %u, mode %u\n", + current->comm, task_pid_nr(current), + ios->clock, ios->power_mode); + host->mrq = ERR_PTR(-EINTR); + } else { + dev_dbg(dev, + "%s.%d: CMD%u active since %lu, now %lu!\n", + current->comm, task_pid_nr(current), + host->mrq->cmd->opcode, host->last_req_ts, jiffies); + } + spin_unlock_irqrestore(&host->lock, flags); + + mutex_unlock(&host->ios_lock); + return; + } + + host->mrq = ERR_PTR(-EBUSY); + + spin_unlock_irqrestore(&host->lock, flags); + + /* + * host->power toggles between false and true in both cases - either + * or not the controller can be runtime-suspended during inactivity. + * But if the controller has to be kept on, the runtime-pm usage_count + * is kept positive, so no suspending actually takes place. + */ + if (ios->power_mode == MMC_POWER_ON && ios->clock) { + if (host->power != TMIO_MMC_ON_RUN) { + tmio_mmc_clk_update(mmc); + pm_runtime_get_sync(dev); + if (host->resuming) { + tmio_mmc_reset(host); + host->resuming = false; + } + } + if (host->power == TMIO_MMC_OFF_STOP) + tmio_mmc_reset(host); + tmio_mmc_set_clock(host, ios->clock); + if (host->power == TMIO_MMC_OFF_STOP) + /* power up SD card and the bus */ + tmio_mmc_power_on(host, ios->vdd); + host->power = TMIO_MMC_ON_RUN; + /* start bus clock */ + tmio_mmc_clk_start(host); + } else if (ios->power_mode != MMC_POWER_UP) { + struct tmio_mmc_data *pdata = host->pdata; + unsigned int old_power = host->power; + + if (old_power != TMIO_MMC_OFF_STOP) { + if (ios->power_mode == MMC_POWER_OFF) { + tmio_mmc_power_off(host); + host->power = TMIO_MMC_OFF_STOP; + } else { + host->power = TMIO_MMC_ON_STOP; + } + } + + if (old_power == TMIO_MMC_ON_RUN) { + tmio_mmc_clk_stop(host); + pm_runtime_put(dev); + if (pdata->clk_disable) + pdata->clk_disable(host->pdev); + } + } + + if (host->power != TMIO_MMC_OFF_STOP) { + switch (ios->bus_width) { + case MMC_BUS_WIDTH_1: + sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0); + break; + case MMC_BUS_WIDTH_4: + sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0); + break; + } + } + + /* Let things settle. delay taken from winCE driver */ + udelay(140); + if (PTR_ERR(host->mrq) == -EINTR) + dev_dbg(&host->pdev->dev, + "%s.%d: IOS interrupted: clk %u, mode %u", + current->comm, task_pid_nr(current), + ios->clock, ios->power_mode); + host->mrq = NULL; + + mutex_unlock(&host->ios_lock); +} + +static int tmio_mmc_get_ro(struct mmc_host *mmc) +{ + struct tmio_mmc_host *host = mmc_priv(mmc); + struct tmio_mmc_data *pdata = host->pdata; + int ret = mmc_gpio_get_ro(mmc); + if (ret >= 0) + return ret; + + return !((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) || + (sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT)); +} + +static const struct mmc_host_ops tmio_mmc_ops = { + .request = tmio_mmc_request, + .set_ios = tmio_mmc_set_ios, + .get_ro = tmio_mmc_get_ro, + .get_cd = mmc_gpio_get_cd, + .enable_sdio_irq = tmio_mmc_enable_sdio_irq, +}; + +static int tmio_mmc_init_ocr(struct tmio_mmc_host *host) +{ + struct tmio_mmc_data *pdata = host->pdata; + struct mmc_host *mmc = host->mmc; + + mmc_regulator_get_supply(mmc); + + /* use ocr_mask if no regulator */ + if (!mmc->ocr_avail) + mmc->ocr_avail = pdata->ocr_mask; + + /* + * try again. + * There is possibility that regulator has not been probed + */ + if (!mmc->ocr_avail) + return -EPROBE_DEFER; + + return 0; +} + +static void tmio_mmc_of_parse(struct platform_device *pdev, + struct tmio_mmc_data *pdata) +{ + const struct device_node *np = pdev->dev.of_node; + if (!np) + return; + + if (of_get_property(np, "toshiba,mmc-wrprotect-disable", NULL)) + pdata->flags |= TMIO_MMC_WRPROTECT_DISABLE; +} + +int tmio_mmc_host_probe(struct tmio_mmc_host **host, + struct platform_device *pdev, + struct tmio_mmc_data *pdata) +{ + struct tmio_mmc_host *_host; + struct mmc_host *mmc; + struct resource *res_ctl; + int ret; + u32 irq_mask = TMIO_MASK_CMD; + + tmio_mmc_of_parse(pdev, pdata); + + if (!(pdata->flags & TMIO_MMC_HAS_IDLE_WAIT)) + pdata->write16_hook = NULL; + + res_ctl = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res_ctl) + return -EINVAL; + + mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &pdev->dev); + if (!mmc) + return -ENOMEM; + + ret = mmc_of_parse(mmc); + if (ret < 0) + goto host_free; + + pdata->dev = &pdev->dev; + _host = mmc_priv(mmc); + _host->pdata = pdata; + _host->mmc = mmc; + _host->pdev = pdev; + platform_set_drvdata(pdev, mmc); + + _host->set_pwr = pdata->set_pwr; + _host->set_clk_div = pdata->set_clk_div; + + ret = tmio_mmc_init_ocr(_host); + if (ret < 0) + goto host_free; + + _host->ctl = ioremap(res_ctl->start, resource_size(res_ctl)); + if (!_host->ctl) { + ret = -ENOMEM; + goto host_free; + } + + mmc->ops = &tmio_mmc_ops; + mmc->caps |= MMC_CAP_4_BIT_DATA | pdata->capabilities; + mmc->caps2 |= pdata->capabilities2; + mmc->max_segs = 32; + mmc->max_blk_size = 512; + mmc->max_blk_count = (PAGE_CACHE_SIZE / mmc->max_blk_size) * + mmc->max_segs; + mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; + mmc->max_seg_size = mmc->max_req_size; + + _host->native_hotplug = !(pdata->flags & TMIO_MMC_USE_GPIO_CD || + mmc->caps & MMC_CAP_NEEDS_POLL || + mmc->caps & MMC_CAP_NONREMOVABLE || + mmc->slot.cd_irq >= 0); + + _host->power = TMIO_MMC_OFF_STOP; + pm_runtime_enable(&pdev->dev); + ret = pm_runtime_resume(&pdev->dev); + if (ret < 0) + goto pm_disable; + + if (tmio_mmc_clk_update(mmc) < 0) { + mmc->f_max = pdata->hclk; + mmc->f_min = mmc->f_max / 512; + } + + /* + * There are 4 different scenarios for the card detection: + * 1) an external gpio irq handles the cd (best for power savings) + * 2) internal sdhi irq handles the cd + * 3) a worker thread polls the sdhi - indicated by MMC_CAP_NEEDS_POLL + * 4) the medium is non-removable - indicated by MMC_CAP_NONREMOVABLE + * + * While we increment the runtime PM counter for all scenarios when + * the mmc core activates us by calling an appropriate set_ios(), we + * must additionally ensure that in case 2) the tmio mmc hardware stays + * powered on during runtime for the card detection to work. + */ + if (_host->native_hotplug) + pm_runtime_get_noresume(&pdev->dev); + + tmio_mmc_clk_stop(_host); + tmio_mmc_reset(_host); + + _host->sdcard_irq_mask = sd_ctrl_read32(_host, CTL_IRQ_MASK); + tmio_mmc_disable_mmc_irqs(_host, TMIO_MASK_ALL); + + /* Unmask the IRQs we want to know about */ + if (!_host->chan_rx) + irq_mask |= TMIO_MASK_READOP; + if (!_host->chan_tx) + irq_mask |= TMIO_MASK_WRITEOP; + if (!_host->native_hotplug) + irq_mask &= ~(TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT); + + _host->sdcard_irq_mask &= ~irq_mask; + + if (pdata->flags & TMIO_MMC_SDIO_IRQ) + tmio_mmc_enable_sdio_irq(mmc, 0); + + spin_lock_init(&_host->lock); + mutex_init(&_host->ios_lock); + + /* Init delayed work for request timeouts */ + INIT_DELAYED_WORK(&_host->delayed_reset_work, tmio_mmc_reset_work); + INIT_WORK(&_host->done, tmio_mmc_done_work); + + /* See if we also get DMA */ + tmio_mmc_request_dma(_host, pdata); + + ret = mmc_add_host(mmc); + if (pdata->clk_disable) + pdata->clk_disable(pdev); + if (ret < 0) { + tmio_mmc_host_remove(_host); + return ret; + } + + dev_pm_qos_expose_latency_limit(&pdev->dev, 100); + + if (pdata->flags & TMIO_MMC_USE_GPIO_CD) { + ret = mmc_gpio_request_cd(mmc, pdata->cd_gpio, 0); + if (ret < 0) { + tmio_mmc_host_remove(_host); + return ret; + } + } + + *host = _host; + + return 0; + +pm_disable: + pm_runtime_disable(&pdev->dev); + iounmap(_host->ctl); +host_free: + mmc_free_host(mmc); + + return ret; +} +EXPORT_SYMBOL(tmio_mmc_host_probe); + +void tmio_mmc_host_remove(struct tmio_mmc_host *host) +{ + struct platform_device *pdev = host->pdev; + struct mmc_host *mmc = host->mmc; + + if (!host->native_hotplug) + pm_runtime_get_sync(&pdev->dev); + + dev_pm_qos_hide_latency_limit(&pdev->dev); + + mmc_remove_host(mmc); + cancel_work_sync(&host->done); + cancel_delayed_work_sync(&host->delayed_reset_work); + tmio_mmc_release_dma(host); + + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + + iounmap(host->ctl); + mmc_free_host(mmc); +} +EXPORT_SYMBOL(tmio_mmc_host_remove); + +#ifdef CONFIG_PM_SLEEP +int tmio_mmc_host_suspend(struct device *dev) +{ + struct mmc_host *mmc = dev_get_drvdata(dev); + struct tmio_mmc_host *host = mmc_priv(mmc); + + tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_ALL); + return 0; +} +EXPORT_SYMBOL(tmio_mmc_host_suspend); + +int tmio_mmc_host_resume(struct device *dev) +{ + struct mmc_host *mmc = dev_get_drvdata(dev); + struct tmio_mmc_host *host = mmc_priv(mmc); + + tmio_mmc_enable_dma(host, true); + + /* The MMC core will perform the complete set up */ + host->resuming = true; + return 0; +} +EXPORT_SYMBOL(tmio_mmc_host_resume); +#endif + +#ifdef CONFIG_PM_RUNTIME +int tmio_mmc_host_runtime_suspend(struct device *dev) +{ + return 0; +} +EXPORT_SYMBOL(tmio_mmc_host_runtime_suspend); + +int tmio_mmc_host_runtime_resume(struct device *dev) +{ + struct mmc_host *mmc = dev_get_drvdata(dev); + struct tmio_mmc_host *host = mmc_priv(mmc); + + tmio_mmc_enable_dma(host, true); + + return 0; +} +EXPORT_SYMBOL(tmio_mmc_host_runtime_resume); +#endif + +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/usdhi6rol0.c b/drivers/mmc/host/usdhi6rol0.c new file mode 100644 index 00000000000..f0a39eb049a --- /dev/null +++ b/drivers/mmc/host/usdhi6rol0.c @@ -0,0 +1,1847 @@ +/* + * Copyright (C) 2013-2014 Renesas Electronics Europe Ltd. + * Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/dmaengine.h> +#include <linux/highmem.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/log2.h> +#include <linux/mmc/host.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/sd.h> +#include <linux/mmc/sdio.h> +#include <linux/module.h> +#include <linux/pagemap.h> +#include <linux/platform_device.h> +#include <linux/scatterlist.h> +#include <linux/string.h> +#include <linux/time.h> +#include <linux/virtio.h> +#include <linux/workqueue.h> + +#define USDHI6_SD_CMD 0x0000 +#define USDHI6_SD_PORT_SEL 0x0004 +#define USDHI6_SD_ARG 0x0008 +#define USDHI6_SD_STOP 0x0010 +#define USDHI6_SD_SECCNT 0x0014 +#define USDHI6_SD_RSP10 0x0018 +#define USDHI6_SD_RSP32 0x0020 +#define USDHI6_SD_RSP54 0x0028 +#define USDHI6_SD_RSP76 0x0030 +#define USDHI6_SD_INFO1 0x0038 +#define USDHI6_SD_INFO2 0x003c +#define USDHI6_SD_INFO1_MASK 0x0040 +#define USDHI6_SD_INFO2_MASK 0x0044 +#define USDHI6_SD_CLK_CTRL 0x0048 +#define USDHI6_SD_SIZE 0x004c +#define USDHI6_SD_OPTION 0x0050 +#define USDHI6_SD_ERR_STS1 0x0058 +#define USDHI6_SD_ERR_STS2 0x005c +#define USDHI6_SD_BUF0 0x0060 +#define USDHI6_SDIO_MODE 0x0068 +#define USDHI6_SDIO_INFO1 0x006c +#define USDHI6_SDIO_INFO1_MASK 0x0070 +#define USDHI6_CC_EXT_MODE 0x01b0 +#define USDHI6_SOFT_RST 0x01c0 +#define USDHI6_VERSION 0x01c4 +#define USDHI6_HOST_MODE 0x01c8 +#define USDHI6_SDIF_MODE 0x01cc + +#define USDHI6_SD_CMD_APP 0x0040 +#define USDHI6_SD_CMD_MODE_RSP_AUTO 0x0000 +#define USDHI6_SD_CMD_MODE_RSP_NONE 0x0300 +#define USDHI6_SD_CMD_MODE_RSP_R1 0x0400 /* Also R5, R6, R7 */ +#define USDHI6_SD_CMD_MODE_RSP_R1B 0x0500 /* R1b */ +#define USDHI6_SD_CMD_MODE_RSP_R2 0x0600 +#define USDHI6_SD_CMD_MODE_RSP_R3 0x0700 /* Also R4 */ +#define USDHI6_SD_CMD_DATA 0x0800 +#define USDHI6_SD_CMD_READ 0x1000 +#define USDHI6_SD_CMD_MULTI 0x2000 +#define USDHI6_SD_CMD_CMD12_AUTO_OFF 0x4000 + +#define USDHI6_CC_EXT_MODE_SDRW BIT(1) + +#define USDHI6_SD_INFO1_RSP_END BIT(0) +#define USDHI6_SD_INFO1_ACCESS_END BIT(2) +#define USDHI6_SD_INFO1_CARD_OUT BIT(3) +#define USDHI6_SD_INFO1_CARD_IN BIT(4) +#define USDHI6_SD_INFO1_CD BIT(5) +#define USDHI6_SD_INFO1_WP BIT(7) +#define USDHI6_SD_INFO1_D3_CARD_OUT BIT(8) +#define USDHI6_SD_INFO1_D3_CARD_IN BIT(9) + +#define USDHI6_SD_INFO2_CMD_ERR BIT(0) +#define USDHI6_SD_INFO2_CRC_ERR BIT(1) +#define USDHI6_SD_INFO2_END_ERR BIT(2) +#define USDHI6_SD_INFO2_TOUT BIT(3) +#define USDHI6_SD_INFO2_IWA_ERR BIT(4) +#define USDHI6_SD_INFO2_IRA_ERR BIT(5) +#define USDHI6_SD_INFO2_RSP_TOUT BIT(6) +#define USDHI6_SD_INFO2_SDDAT0 BIT(7) +#define USDHI6_SD_INFO2_BRE BIT(8) +#define USDHI6_SD_INFO2_BWE BIT(9) +#define USDHI6_SD_INFO2_SCLKDIVEN BIT(13) +#define USDHI6_SD_INFO2_CBSY BIT(14) +#define USDHI6_SD_INFO2_ILA BIT(15) + +#define USDHI6_SD_INFO1_CARD_INSERT (USDHI6_SD_INFO1_CARD_IN | USDHI6_SD_INFO1_D3_CARD_IN) +#define USDHI6_SD_INFO1_CARD_EJECT (USDHI6_SD_INFO1_CARD_OUT | USDHI6_SD_INFO1_D3_CARD_OUT) +#define USDHI6_SD_INFO1_CARD (USDHI6_SD_INFO1_CARD_INSERT | USDHI6_SD_INFO1_CARD_EJECT) +#define USDHI6_SD_INFO1_CARD_CD (USDHI6_SD_INFO1_CARD_IN | USDHI6_SD_INFO1_CARD_OUT) + +#define USDHI6_SD_INFO2_ERR (USDHI6_SD_INFO2_CMD_ERR | \ + USDHI6_SD_INFO2_CRC_ERR | USDHI6_SD_INFO2_END_ERR | \ + USDHI6_SD_INFO2_TOUT | USDHI6_SD_INFO2_IWA_ERR | \ + USDHI6_SD_INFO2_IRA_ERR | USDHI6_SD_INFO2_RSP_TOUT | \ + USDHI6_SD_INFO2_ILA) + +#define USDHI6_SD_INFO1_IRQ (USDHI6_SD_INFO1_RSP_END | USDHI6_SD_INFO1_ACCESS_END | \ + USDHI6_SD_INFO1_CARD) + +#define USDHI6_SD_INFO2_IRQ (USDHI6_SD_INFO2_ERR | USDHI6_SD_INFO2_BRE | \ + USDHI6_SD_INFO2_BWE | 0x0800 | USDHI6_SD_INFO2_ILA) + +#define USDHI6_SD_CLK_CTRL_SCLKEN BIT(8) + +#define USDHI6_SD_STOP_STP BIT(0) +#define USDHI6_SD_STOP_SEC BIT(8) + +#define USDHI6_SDIO_INFO1_IOIRQ BIT(0) +#define USDHI6_SDIO_INFO1_EXPUB52 BIT(14) +#define USDHI6_SDIO_INFO1_EXWT BIT(15) + +#define USDHI6_SD_ERR_STS1_CRC_NO_ERROR BIT(13) + +#define USDHI6_SOFT_RST_RESERVED (BIT(1) | BIT(2)) +#define USDHI6_SOFT_RST_RESET BIT(0) + +#define USDHI6_SD_OPTION_TIMEOUT_SHIFT 4 +#define USDHI6_SD_OPTION_TIMEOUT_MASK (0xf << USDHI6_SD_OPTION_TIMEOUT_SHIFT) +#define USDHI6_SD_OPTION_WIDTH_1 BIT(15) + +#define USDHI6_SD_PORT_SEL_PORTS_SHIFT 8 + +#define USDHI6_SD_CLK_CTRL_DIV_MASK 0xff + +#define USDHI6_SDIO_INFO1_IRQ (USDHI6_SDIO_INFO1_IOIRQ | 3 | \ + USDHI6_SDIO_INFO1_EXPUB52 | USDHI6_SDIO_INFO1_EXWT) + +#define USDHI6_MIN_DMA 64 + +enum usdhi6_wait_for { + USDHI6_WAIT_FOR_REQUEST, + USDHI6_WAIT_FOR_CMD, + USDHI6_WAIT_FOR_MREAD, + USDHI6_WAIT_FOR_MWRITE, + USDHI6_WAIT_FOR_READ, + USDHI6_WAIT_FOR_WRITE, + USDHI6_WAIT_FOR_DATA_END, + USDHI6_WAIT_FOR_STOP, + USDHI6_WAIT_FOR_DMA, +}; + +struct usdhi6_page { + struct page *page; + void *mapped; /* mapped page */ +}; + +struct usdhi6_host { + struct mmc_host *mmc; + struct mmc_request *mrq; + void __iomem *base; + struct clk *clk; + + /* SG memory handling */ + + /* Common for multiple and single block requests */ + struct usdhi6_page pg; /* current page from an SG */ + void *blk_page; /* either a mapped page, or the bounce buffer */ + size_t offset; /* offset within a page, including sg->offset */ + + /* Blocks, crossing a page boundary */ + size_t head_len; + struct usdhi6_page head_pg; + + /* A bounce buffer for unaligned blocks or blocks, crossing a page boundary */ + struct scatterlist bounce_sg; + u8 bounce_buf[512]; + + /* Multiple block requests only */ + struct scatterlist *sg; /* current SG segment */ + int page_idx; /* page index within an SG segment */ + + enum usdhi6_wait_for wait; + u32 status_mask; + u32 status2_mask; + u32 sdio_mask; + u32 io_error; + u32 irq_status; + unsigned long imclk; + unsigned long rate; + bool app_cmd; + + /* Timeout handling */ + struct delayed_work timeout_work; + unsigned long timeout; + + /* DMA support */ + struct dma_chan *chan_rx; + struct dma_chan *chan_tx; + bool dma_active; +}; + +/* I/O primitives */ + +static void usdhi6_write(struct usdhi6_host *host, u32 reg, u32 data) +{ + iowrite32(data, host->base + reg); + dev_vdbg(mmc_dev(host->mmc), "%s(0x%p + 0x%x) = 0x%x\n", __func__, + host->base, reg, data); +} + +static void usdhi6_write16(struct usdhi6_host *host, u32 reg, u16 data) +{ + iowrite16(data, host->base + reg); + dev_vdbg(mmc_dev(host->mmc), "%s(0x%p + 0x%x) = 0x%x\n", __func__, + host->base, reg, data); +} + +static u32 usdhi6_read(struct usdhi6_host *host, u32 reg) +{ + u32 data = ioread32(host->base + reg); + dev_vdbg(mmc_dev(host->mmc), "%s(0x%p + 0x%x) = 0x%x\n", __func__, + host->base, reg, data); + return data; +} + +static u16 usdhi6_read16(struct usdhi6_host *host, u32 reg) +{ + u16 data = ioread16(host->base + reg); + dev_vdbg(mmc_dev(host->mmc), "%s(0x%p + 0x%x) = 0x%x\n", __func__, + host->base, reg, data); + return data; +} + +static void usdhi6_irq_enable(struct usdhi6_host *host, u32 info1, u32 info2) +{ + host->status_mask = USDHI6_SD_INFO1_IRQ & ~info1; + host->status2_mask = USDHI6_SD_INFO2_IRQ & ~info2; + usdhi6_write(host, USDHI6_SD_INFO1_MASK, host->status_mask); + usdhi6_write(host, USDHI6_SD_INFO2_MASK, host->status2_mask); +} + +static void usdhi6_wait_for_resp(struct usdhi6_host *host) +{ + usdhi6_irq_enable(host, USDHI6_SD_INFO1_RSP_END | + USDHI6_SD_INFO1_ACCESS_END | USDHI6_SD_INFO1_CARD_CD, + USDHI6_SD_INFO2_ERR); +} + +static void usdhi6_wait_for_brwe(struct usdhi6_host *host, bool read) +{ + usdhi6_irq_enable(host, USDHI6_SD_INFO1_ACCESS_END | + USDHI6_SD_INFO1_CARD_CD, USDHI6_SD_INFO2_ERR | + (read ? USDHI6_SD_INFO2_BRE : USDHI6_SD_INFO2_BWE)); +} + +static void usdhi6_only_cd(struct usdhi6_host *host) +{ + /* Mask all except card hotplug */ + usdhi6_irq_enable(host, USDHI6_SD_INFO1_CARD_CD, 0); +} + +static void usdhi6_mask_all(struct usdhi6_host *host) +{ + usdhi6_irq_enable(host, 0, 0); +} + +static int usdhi6_error_code(struct usdhi6_host *host) +{ + u32 err; + + usdhi6_write(host, USDHI6_SD_STOP, USDHI6_SD_STOP_STP); + + if (host->io_error & + (USDHI6_SD_INFO2_RSP_TOUT | USDHI6_SD_INFO2_TOUT)) { + u32 rsp54 = usdhi6_read(host, USDHI6_SD_RSP54); + int opc = host->mrq ? host->mrq->cmd->opcode : -1; + + err = usdhi6_read(host, USDHI6_SD_ERR_STS2); + /* Response timeout is often normal, don't spam the log */ + if (host->wait == USDHI6_WAIT_FOR_CMD) + dev_dbg(mmc_dev(host->mmc), + "T-out sts 0x%x, resp 0x%x, state %u, CMD%d\n", + err, rsp54, host->wait, opc); + else + dev_warn(mmc_dev(host->mmc), + "T-out sts 0x%x, resp 0x%x, state %u, CMD%d\n", + err, rsp54, host->wait, opc); + return -ETIMEDOUT; + } + + err = usdhi6_read(host, USDHI6_SD_ERR_STS1); + if (err != USDHI6_SD_ERR_STS1_CRC_NO_ERROR) + dev_warn(mmc_dev(host->mmc), "Err sts 0x%x, state %u, CMD%d\n", + err, host->wait, host->mrq ? host->mrq->cmd->opcode : -1); + if (host->io_error & USDHI6_SD_INFO2_ILA) + return -EILSEQ; + + return -EIO; +} + +/* Scatter-Gather management */ + +/* + * In PIO mode we have to map each page separately, using kmap(). That way + * adjacent pages are mapped to non-adjacent virtual addresses. That's why we + * have to use a bounce buffer for blocks, crossing page boundaries. Such blocks + * have been observed with an SDIO WiFi card (b43 driver). + */ +static void usdhi6_blk_bounce(struct usdhi6_host *host, + struct scatterlist *sg) +{ + struct mmc_data *data = host->mrq->data; + size_t blk_head = host->head_len; + + dev_dbg(mmc_dev(host->mmc), "%s(): CMD%u of %u SG: %ux%u @ 0x%x\n", + __func__, host->mrq->cmd->opcode, data->sg_len, + data->blksz, data->blocks, sg->offset); + + host->head_pg.page = host->pg.page; + host->head_pg.mapped = host->pg.mapped; + host->pg.page = nth_page(host->pg.page, 1); + host->pg.mapped = kmap(host->pg.page); + + host->blk_page = host->bounce_buf; + host->offset = 0; + + if (data->flags & MMC_DATA_READ) + return; + + memcpy(host->bounce_buf, host->head_pg.mapped + PAGE_SIZE - blk_head, + blk_head); + memcpy(host->bounce_buf + blk_head, host->pg.mapped, + data->blksz - blk_head); +} + +/* Only called for multiple block IO */ +static void usdhi6_sg_prep(struct usdhi6_host *host) +{ + struct mmc_request *mrq = host->mrq; + struct mmc_data *data = mrq->data; + + usdhi6_write(host, USDHI6_SD_SECCNT, data->blocks); + + host->sg = data->sg; + /* TODO: if we always map, this is redundant */ + host->offset = host->sg->offset; +} + +/* Map the first page in an SG segment: common for multiple and single block IO */ +static void *usdhi6_sg_map(struct usdhi6_host *host) +{ + struct mmc_data *data = host->mrq->data; + struct scatterlist *sg = data->sg_len > 1 ? host->sg : data->sg; + size_t head = PAGE_SIZE - sg->offset; + size_t blk_head = head % data->blksz; + + WARN(host->pg.page, "%p not properly unmapped!\n", host->pg.page); + if (WARN(sg_dma_len(sg) % data->blksz, + "SG size %u isn't a multiple of block size %u\n", + sg_dma_len(sg), data->blksz)) + return NULL; + + host->pg.page = sg_page(sg); + host->pg.mapped = kmap(host->pg.page); + host->offset = sg->offset; + + /* + * Block size must be a power of 2 for multi-block transfers, + * therefore blk_head is equal for all pages in this SG + */ + host->head_len = blk_head; + + if (head < data->blksz) + /* + * The first block in the SG crosses a page boundary. + * Max blksz = 512, so blocks can only span 2 pages + */ + usdhi6_blk_bounce(host, sg); + else + host->blk_page = host->pg.mapped; + + dev_dbg(mmc_dev(host->mmc), "Mapped %p (%lx) at %p + %u for CMD%u @ 0x%p\n", + host->pg.page, page_to_pfn(host->pg.page), host->pg.mapped, + sg->offset, host->mrq->cmd->opcode, host->mrq); + + return host->blk_page + host->offset; +} + +/* Unmap the current page: common for multiple and single block IO */ +static void usdhi6_sg_unmap(struct usdhi6_host *host, bool force) +{ + struct mmc_data *data = host->mrq->data; + struct page *page = host->head_pg.page; + + if (page) { + /* Previous block was cross-page boundary */ + struct scatterlist *sg = data->sg_len > 1 ? + host->sg : data->sg; + size_t blk_head = host->head_len; + + if (!data->error && data->flags & MMC_DATA_READ) { + memcpy(host->head_pg.mapped + PAGE_SIZE - blk_head, + host->bounce_buf, blk_head); + memcpy(host->pg.mapped, host->bounce_buf + blk_head, + data->blksz - blk_head); + } + + flush_dcache_page(page); + kunmap(page); + + host->head_pg.page = NULL; + + if (!force && sg_dma_len(sg) + sg->offset > + (host->page_idx << PAGE_SHIFT) + data->blksz - blk_head) + /* More blocks in this SG, don't unmap the next page */ + return; + } + + page = host->pg.page; + if (!page) + return; + + flush_dcache_page(page); + kunmap(page); + + host->pg.page = NULL; +} + +/* Called from MMC_WRITE_MULTIPLE_BLOCK or MMC_READ_MULTIPLE_BLOCK */ +static void usdhi6_sg_advance(struct usdhi6_host *host) +{ + struct mmc_data *data = host->mrq->data; + size_t done, total; + + /* New offset: set at the end of the previous block */ + if (host->head_pg.page) { + /* Finished a cross-page block, jump to the new page */ + host->page_idx++; + host->offset = data->blksz - host->head_len; + host->blk_page = host->pg.mapped; + usdhi6_sg_unmap(host, false); + } else { + host->offset += data->blksz; + /* The completed block didn't cross a page boundary */ + if (host->offset == PAGE_SIZE) { + /* If required, we'll map the page below */ + host->offset = 0; + host->page_idx++; + } + } + + /* + * Now host->blk_page + host->offset point at the end of our last block + * and host->page_idx is the index of the page, in which our new block + * is located, if any + */ + + done = (host->page_idx << PAGE_SHIFT) + host->offset; + total = host->sg->offset + sg_dma_len(host->sg); + + dev_dbg(mmc_dev(host->mmc), "%s(): %zu of %zu @ %zu\n", __func__, + done, total, host->offset); + + if (done < total && host->offset) { + /* More blocks in this page */ + if (host->offset + data->blksz > PAGE_SIZE) + /* We approached at a block, that spans 2 pages */ + usdhi6_blk_bounce(host, host->sg); + + return; + } + + /* Finished current page or an SG segment */ + usdhi6_sg_unmap(host, false); + + if (done == total) { + /* + * End of an SG segment or the complete SG: jump to the next + * segment, we'll map it later in usdhi6_blk_read() or + * usdhi6_blk_write() + */ + struct scatterlist *next = sg_next(host->sg); + + host->page_idx = 0; + + if (!next) + host->wait = USDHI6_WAIT_FOR_DATA_END; + host->sg = next; + + if (WARN(next && sg_dma_len(next) % data->blksz, + "SG size %u isn't a multiple of block size %u\n", + sg_dma_len(next), data->blksz)) + data->error = -EINVAL; + + return; + } + + /* We cannot get here after crossing a page border */ + + /* Next page in the same SG */ + host->pg.page = nth_page(sg_page(host->sg), host->page_idx); + host->pg.mapped = kmap(host->pg.page); + host->blk_page = host->pg.mapped; + + dev_dbg(mmc_dev(host->mmc), "Mapped %p (%lx) at %p for CMD%u @ 0x%p\n", + host->pg.page, page_to_pfn(host->pg.page), host->pg.mapped, + host->mrq->cmd->opcode, host->mrq); +} + +/* DMA handling */ + +static void usdhi6_dma_release(struct usdhi6_host *host) +{ + host->dma_active = false; + if (host->chan_tx) { + struct dma_chan *chan = host->chan_tx; + host->chan_tx = NULL; + dma_release_channel(chan); + } + if (host->chan_rx) { + struct dma_chan *chan = host->chan_rx; + host->chan_rx = NULL; + dma_release_channel(chan); + } +} + +static void usdhi6_dma_stop_unmap(struct usdhi6_host *host) +{ + struct mmc_data *data = host->mrq->data; + + if (!host->dma_active) + return; + + usdhi6_write(host, USDHI6_CC_EXT_MODE, 0); + host->dma_active = false; + + if (data->flags & MMC_DATA_READ) + dma_unmap_sg(host->chan_rx->device->dev, data->sg, + data->sg_len, DMA_FROM_DEVICE); + else + dma_unmap_sg(host->chan_tx->device->dev, data->sg, + data->sg_len, DMA_TO_DEVICE); +} + +static void usdhi6_dma_complete(void *arg) +{ + struct usdhi6_host *host = arg; + struct mmc_request *mrq = host->mrq; + + if (WARN(!mrq || !mrq->data, "%s: NULL data in DMA completion for %p!\n", + dev_name(mmc_dev(host->mmc)), mrq)) + return; + + dev_dbg(mmc_dev(host->mmc), "%s(): CMD%u DMA completed\n", __func__, + mrq->cmd->opcode); + + usdhi6_dma_stop_unmap(host); + usdhi6_wait_for_brwe(host, mrq->data->flags & MMC_DATA_READ); +} + +static int usdhi6_dma_setup(struct usdhi6_host *host, struct dma_chan *chan, + enum dma_transfer_direction dir) +{ + struct mmc_data *data = host->mrq->data; + struct scatterlist *sg = data->sg; + struct dma_async_tx_descriptor *desc = NULL; + dma_cookie_t cookie = -EINVAL; + enum dma_data_direction data_dir; + int ret; + + switch (dir) { + case DMA_MEM_TO_DEV: + data_dir = DMA_TO_DEVICE; + break; + case DMA_DEV_TO_MEM: + data_dir = DMA_FROM_DEVICE; + break; + default: + return -EINVAL; + } + + ret = dma_map_sg(chan->device->dev, sg, data->sg_len, data_dir); + if (ret > 0) { + host->dma_active = true; + desc = dmaengine_prep_slave_sg(chan, sg, ret, dir, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + } + + if (desc) { + desc->callback = usdhi6_dma_complete; + desc->callback_param = host; + cookie = dmaengine_submit(desc); + } + + dev_dbg(mmc_dev(host->mmc), "%s(): mapped %d -> %d, cookie %d @ %p\n", + __func__, data->sg_len, ret, cookie, desc); + + if (cookie < 0) { + /* DMA failed, fall back to PIO */ + if (ret >= 0) + ret = cookie; + usdhi6_dma_release(host); + dev_warn(mmc_dev(host->mmc), + "DMA failed: %d, falling back to PIO\n", ret); + } + + return cookie; +} + +static int usdhi6_dma_start(struct usdhi6_host *host) +{ + if (!host->chan_rx || !host->chan_tx) + return -ENODEV; + + if (host->mrq->data->flags & MMC_DATA_READ) + return usdhi6_dma_setup(host, host->chan_rx, DMA_DEV_TO_MEM); + + return usdhi6_dma_setup(host, host->chan_tx, DMA_MEM_TO_DEV); +} + +static void usdhi6_dma_kill(struct usdhi6_host *host) +{ + struct mmc_data *data = host->mrq->data; + + dev_dbg(mmc_dev(host->mmc), "%s(): SG of %u: %ux%u\n", + __func__, data->sg_len, data->blocks, data->blksz); + /* Abort DMA */ + if (data->flags & MMC_DATA_READ) + dmaengine_terminate_all(host->chan_rx); + else + dmaengine_terminate_all(host->chan_tx); +} + +static void usdhi6_dma_check_error(struct usdhi6_host *host) +{ + struct mmc_data *data = host->mrq->data; + + dev_dbg(mmc_dev(host->mmc), "%s(): IO error %d, status 0x%x\n", + __func__, host->io_error, usdhi6_read(host, USDHI6_SD_INFO1)); + + if (host->io_error) { + data->error = usdhi6_error_code(host); + data->bytes_xfered = 0; + usdhi6_dma_kill(host); + usdhi6_dma_release(host); + dev_warn(mmc_dev(host->mmc), + "DMA failed: %d, falling back to PIO\n", data->error); + return; + } + + /* + * The datasheet tells us to check a response from the card, whereas + * responses only come after the command phase, not after the data + * phase. Let's check anyway. + */ + if (host->irq_status & USDHI6_SD_INFO1_RSP_END) + dev_warn(mmc_dev(host->mmc), "Unexpected response received!\n"); +} + +static void usdhi6_dma_kick(struct usdhi6_host *host) +{ + if (host->mrq->data->flags & MMC_DATA_READ) + dma_async_issue_pending(host->chan_rx); + else + dma_async_issue_pending(host->chan_tx); +} + +static void usdhi6_dma_request(struct usdhi6_host *host, phys_addr_t start) +{ + struct dma_slave_config cfg = { + .src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + }; + int ret; + + host->chan_tx = dma_request_slave_channel(mmc_dev(host->mmc), "tx"); + dev_dbg(mmc_dev(host->mmc), "%s: TX: got channel %p\n", __func__, + host->chan_tx); + + if (!host->chan_tx) + return; + + cfg.direction = DMA_MEM_TO_DEV; + cfg.dst_addr = start + USDHI6_SD_BUF0; + cfg.dst_maxburst = 128; /* 128 words * 4 bytes = 512 bytes */ + cfg.src_addr = 0; + ret = dmaengine_slave_config(host->chan_tx, &cfg); + if (ret < 0) + goto e_release_tx; + + host->chan_rx = dma_request_slave_channel(mmc_dev(host->mmc), "rx"); + dev_dbg(mmc_dev(host->mmc), "%s: RX: got channel %p\n", __func__, + host->chan_rx); + + if (!host->chan_rx) + goto e_release_tx; + + cfg.direction = DMA_DEV_TO_MEM; + cfg.src_addr = cfg.dst_addr; + cfg.src_maxburst = 128; /* 128 words * 4 bytes = 512 bytes */ + cfg.dst_addr = 0; + ret = dmaengine_slave_config(host->chan_rx, &cfg); + if (ret < 0) + goto e_release_rx; + + return; + +e_release_rx: + dma_release_channel(host->chan_rx); + host->chan_rx = NULL; +e_release_tx: + dma_release_channel(host->chan_tx); + host->chan_tx = NULL; +} + +/* API helpers */ + +static void usdhi6_clk_set(struct usdhi6_host *host, struct mmc_ios *ios) +{ + unsigned long rate = ios->clock; + u32 val; + unsigned int i; + + for (i = 1000; i; i--) { + if (usdhi6_read(host, USDHI6_SD_INFO2) & USDHI6_SD_INFO2_SCLKDIVEN) + break; + usleep_range(10, 100); + } + + if (!i) { + dev_err(mmc_dev(host->mmc), "SD bus busy, clock set aborted\n"); + return; + } + + val = usdhi6_read(host, USDHI6_SD_CLK_CTRL) & ~USDHI6_SD_CLK_CTRL_DIV_MASK; + + if (rate) { + unsigned long new_rate; + + if (host->imclk <= rate) { + if (ios->timing != MMC_TIMING_UHS_DDR50) { + /* Cannot have 1-to-1 clock in DDR mode */ + new_rate = host->imclk; + val |= 0xff; + } else { + new_rate = host->imclk / 2; + } + } else { + unsigned long div = + roundup_pow_of_two(DIV_ROUND_UP(host->imclk, rate)); + val |= div >> 2; + new_rate = host->imclk / div; + } + + if (host->rate == new_rate) + return; + + host->rate = new_rate; + + dev_dbg(mmc_dev(host->mmc), "target %lu, div %u, set %lu\n", + rate, (val & 0xff) << 2, new_rate); + } + + /* + * if old or new rate is equal to input rate, have to switch the clock + * off before changing and on after + */ + if (host->imclk == rate || host->imclk == host->rate || !rate) + usdhi6_write(host, USDHI6_SD_CLK_CTRL, + val & ~USDHI6_SD_CLK_CTRL_SCLKEN); + + if (!rate) { + host->rate = 0; + return; + } + + usdhi6_write(host, USDHI6_SD_CLK_CTRL, val); + + if (host->imclk == rate || host->imclk == host->rate || + !(val & USDHI6_SD_CLK_CTRL_SCLKEN)) + usdhi6_write(host, USDHI6_SD_CLK_CTRL, + val | USDHI6_SD_CLK_CTRL_SCLKEN); +} + +static void usdhi6_set_power(struct usdhi6_host *host, struct mmc_ios *ios) +{ + struct mmc_host *mmc = host->mmc; + + if (!IS_ERR(mmc->supply.vmmc)) + /* Errors ignored... */ + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, + ios->power_mode ? ios->vdd : 0); +} + +static int usdhi6_reset(struct usdhi6_host *host) +{ + int i; + + usdhi6_write(host, USDHI6_SOFT_RST, USDHI6_SOFT_RST_RESERVED); + cpu_relax(); + usdhi6_write(host, USDHI6_SOFT_RST, USDHI6_SOFT_RST_RESERVED | USDHI6_SOFT_RST_RESET); + for (i = 1000; i; i--) + if (usdhi6_read(host, USDHI6_SOFT_RST) & USDHI6_SOFT_RST_RESET) + break; + + return i ? 0 : -ETIMEDOUT; +} + +static void usdhi6_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct usdhi6_host *host = mmc_priv(mmc); + u32 option, mode; + int ret; + + dev_dbg(mmc_dev(mmc), "%uHz, OCR: %u, power %u, bus-width %u, timing %u\n", + ios->clock, ios->vdd, ios->power_mode, ios->bus_width, ios->timing); + + switch (ios->power_mode) { + case MMC_POWER_OFF: + usdhi6_set_power(host, ios); + usdhi6_only_cd(host); + break; + case MMC_POWER_UP: + /* + * We only also touch USDHI6_SD_OPTION from .request(), which + * cannot race with MMC_POWER_UP + */ + ret = usdhi6_reset(host); + if (ret < 0) { + dev_err(mmc_dev(mmc), "Cannot reset the interface!\n"); + } else { + usdhi6_set_power(host, ios); + usdhi6_only_cd(host); + } + break; + case MMC_POWER_ON: + option = usdhi6_read(host, USDHI6_SD_OPTION); + /* + * The eMMC standard only allows 4 or 8 bits in the DDR mode, + * the same probably holds for SD cards. We check here anyway, + * since the datasheet explicitly requires 4 bits for DDR. + */ + if (ios->bus_width == MMC_BUS_WIDTH_1) { + if (ios->timing == MMC_TIMING_UHS_DDR50) + dev_err(mmc_dev(mmc), + "4 bits are required for DDR\n"); + option |= USDHI6_SD_OPTION_WIDTH_1; + mode = 0; + } else { + option &= ~USDHI6_SD_OPTION_WIDTH_1; + mode = ios->timing == MMC_TIMING_UHS_DDR50; + } + usdhi6_write(host, USDHI6_SD_OPTION, option); + usdhi6_write(host, USDHI6_SDIF_MODE, mode); + break; + } + + if (host->rate != ios->clock) + usdhi6_clk_set(host, ios); +} + +/* This is data timeout. Response timeout is fixed to 640 clock cycles */ +static void usdhi6_timeout_set(struct usdhi6_host *host) +{ + struct mmc_request *mrq = host->mrq; + u32 val; + unsigned long ticks; + + if (!mrq->data) + ticks = host->rate / 1000 * mrq->cmd->busy_timeout; + else + ticks = host->rate / 1000000 * (mrq->data->timeout_ns / 1000) + + mrq->data->timeout_clks; + + if (!ticks || ticks > 1 << 27) + /* Max timeout */ + val = 14; + else if (ticks < 1 << 13) + /* Min timeout */ + val = 0; + else + val = order_base_2(ticks) - 13; + + dev_dbg(mmc_dev(host->mmc), "Set %s timeout %lu ticks @ %lu Hz\n", + mrq->data ? "data" : "cmd", ticks, host->rate); + + /* Timeout Counter mask: 0xf0 */ + usdhi6_write(host, USDHI6_SD_OPTION, (val << USDHI6_SD_OPTION_TIMEOUT_SHIFT) | + (usdhi6_read(host, USDHI6_SD_OPTION) & ~USDHI6_SD_OPTION_TIMEOUT_MASK)); +} + +static void usdhi6_request_done(struct usdhi6_host *host) +{ + struct mmc_request *mrq = host->mrq; + struct mmc_data *data = mrq->data; + + if (WARN(host->pg.page || host->head_pg.page, + "Page %p or %p not unmapped: wait %u, CMD%d(%c) @ +0x%zx %ux%u in SG%u!\n", + host->pg.page, host->head_pg.page, host->wait, mrq->cmd->opcode, + data ? (data->flags & MMC_DATA_READ ? 'R' : 'W') : '-', + data ? host->offset : 0, data ? data->blocks : 0, + data ? data->blksz : 0, data ? data->sg_len : 0)) + usdhi6_sg_unmap(host, true); + + if (mrq->cmd->error || + (data && data->error) || + (mrq->stop && mrq->stop->error)) + dev_dbg(mmc_dev(host->mmc), "%s(CMD%d: %ux%u): err %d %d %d\n", + __func__, mrq->cmd->opcode, data ? data->blocks : 0, + data ? data->blksz : 0, + mrq->cmd->error, + data ? data->error : 1, + mrq->stop ? mrq->stop->error : 1); + + /* Disable DMA */ + usdhi6_write(host, USDHI6_CC_EXT_MODE, 0); + host->wait = USDHI6_WAIT_FOR_REQUEST; + host->mrq = NULL; + + mmc_request_done(host->mmc, mrq); +} + +static int usdhi6_cmd_flags(struct usdhi6_host *host) +{ + struct mmc_request *mrq = host->mrq; + struct mmc_command *cmd = mrq->cmd; + u16 opc = cmd->opcode; + + if (host->app_cmd) { + host->app_cmd = false; + opc |= USDHI6_SD_CMD_APP; + } + + if (mrq->data) { + opc |= USDHI6_SD_CMD_DATA; + + if (mrq->data->flags & MMC_DATA_READ) + opc |= USDHI6_SD_CMD_READ; + + if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK || + cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK || + (cmd->opcode == SD_IO_RW_EXTENDED && + mrq->data->blocks > 1)) { + opc |= USDHI6_SD_CMD_MULTI; + if (!mrq->stop) + opc |= USDHI6_SD_CMD_CMD12_AUTO_OFF; + } + + switch (mmc_resp_type(cmd)) { + case MMC_RSP_NONE: + opc |= USDHI6_SD_CMD_MODE_RSP_NONE; + break; + case MMC_RSP_R1: + opc |= USDHI6_SD_CMD_MODE_RSP_R1; + break; + case MMC_RSP_R1B: + opc |= USDHI6_SD_CMD_MODE_RSP_R1B; + break; + case MMC_RSP_R2: + opc |= USDHI6_SD_CMD_MODE_RSP_R2; + break; + case MMC_RSP_R3: + opc |= USDHI6_SD_CMD_MODE_RSP_R3; + break; + default: + dev_warn(mmc_dev(host->mmc), + "Unknown response type %d\n", + mmc_resp_type(cmd)); + return -EINVAL; + } + } + + return opc; +} + +static int usdhi6_rq_start(struct usdhi6_host *host) +{ + struct mmc_request *mrq = host->mrq; + struct mmc_command *cmd = mrq->cmd; + struct mmc_data *data = mrq->data; + int opc = usdhi6_cmd_flags(host); + int i; + + if (opc < 0) + return opc; + + for (i = 1000; i; i--) { + if (!(usdhi6_read(host, USDHI6_SD_INFO2) & USDHI6_SD_INFO2_CBSY)) + break; + usleep_range(10, 100); + } + + if (!i) { + dev_dbg(mmc_dev(host->mmc), "Command active, request aborted\n"); + return -EAGAIN; + } + + if (data) { + bool use_dma; + int ret = 0; + + host->page_idx = 0; + + if (cmd->opcode == SD_IO_RW_EXTENDED && data->blocks > 1) { + switch (data->blksz) { + case 512: + break; + case 32: + case 64: + case 128: + case 256: + if (mrq->stop) + ret = -EINVAL; + break; + default: + ret = -EINVAL; + } + } else if ((cmd->opcode == MMC_READ_MULTIPLE_BLOCK || + cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK) && + data->blksz != 512) { + ret = -EINVAL; + } + + if (ret < 0) { + dev_warn(mmc_dev(host->mmc), "%s(): %u blocks of %u bytes\n", + __func__, data->blocks, data->blksz); + return -EINVAL; + } + + if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK || + cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK || + (cmd->opcode == SD_IO_RW_EXTENDED && + data->blocks > 1)) + usdhi6_sg_prep(host); + + usdhi6_write(host, USDHI6_SD_SIZE, data->blksz); + + if ((data->blksz >= USDHI6_MIN_DMA || + data->blocks > 1) && + (data->blksz % 4 || + data->sg->offset % 4)) + dev_dbg(mmc_dev(host->mmc), + "Bad SG of %u: %ux%u @ %u\n", data->sg_len, + data->blksz, data->blocks, data->sg->offset); + + /* Enable DMA for USDHI6_MIN_DMA bytes or more */ + use_dma = data->blksz >= USDHI6_MIN_DMA && + !(data->blksz % 4) && + usdhi6_dma_start(host) >= DMA_MIN_COOKIE; + + if (use_dma) + usdhi6_write(host, USDHI6_CC_EXT_MODE, USDHI6_CC_EXT_MODE_SDRW); + + dev_dbg(mmc_dev(host->mmc), + "%s(): request opcode %u, %u blocks of %u bytes in %u segments, %s %s @+0x%x%s\n", + __func__, cmd->opcode, data->blocks, data->blksz, + data->sg_len, use_dma ? "DMA" : "PIO", + data->flags & MMC_DATA_READ ? "read" : "write", + data->sg->offset, mrq->stop ? " + stop" : ""); + } else { + dev_dbg(mmc_dev(host->mmc), "%s(): request opcode %u\n", + __func__, cmd->opcode); + } + + /* We have to get a command completion interrupt with DMA too */ + usdhi6_wait_for_resp(host); + + host->wait = USDHI6_WAIT_FOR_CMD; + schedule_delayed_work(&host->timeout_work, host->timeout); + + /* SEC bit is required to enable block counting by the core */ + usdhi6_write(host, USDHI6_SD_STOP, + data && data->blocks > 1 ? USDHI6_SD_STOP_SEC : 0); + usdhi6_write(host, USDHI6_SD_ARG, cmd->arg); + + /* Kick command execution */ + usdhi6_write(host, USDHI6_SD_CMD, opc); + + return 0; +} + +static void usdhi6_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct usdhi6_host *host = mmc_priv(mmc); + int ret; + + cancel_delayed_work_sync(&host->timeout_work); + + host->mrq = mrq; + host->sg = NULL; + + usdhi6_timeout_set(host); + ret = usdhi6_rq_start(host); + if (ret < 0) { + mrq->cmd->error = ret; + usdhi6_request_done(host); + } +} + +static int usdhi6_get_cd(struct mmc_host *mmc) +{ + struct usdhi6_host *host = mmc_priv(mmc); + /* Read is atomic, no need to lock */ + u32 status = usdhi6_read(host, USDHI6_SD_INFO1) & USDHI6_SD_INFO1_CD; + +/* + * level status.CD CD_ACTIVE_HIGH card present + * 1 0 0 0 + * 1 0 1 1 + * 0 1 0 1 + * 0 1 1 0 + */ + return !status ^ !(mmc->caps2 & MMC_CAP2_CD_ACTIVE_HIGH); +} + +static int usdhi6_get_ro(struct mmc_host *mmc) +{ + struct usdhi6_host *host = mmc_priv(mmc); + /* No locking as above */ + u32 status = usdhi6_read(host, USDHI6_SD_INFO1) & USDHI6_SD_INFO1_WP; + +/* + * level status.WP RO_ACTIVE_HIGH card read-only + * 1 0 0 0 + * 1 0 1 1 + * 0 1 0 1 + * 0 1 1 0 + */ + return !status ^ !(mmc->caps2 & MMC_CAP2_RO_ACTIVE_HIGH); +} + +static void usdhi6_enable_sdio_irq(struct mmc_host *mmc, int enable) +{ + struct usdhi6_host *host = mmc_priv(mmc); + + dev_dbg(mmc_dev(mmc), "%s(): %sable\n", __func__, enable ? "en" : "dis"); + + if (enable) { + host->sdio_mask = USDHI6_SDIO_INFO1_IRQ & ~USDHI6_SDIO_INFO1_IOIRQ; + usdhi6_write(host, USDHI6_SDIO_INFO1_MASK, host->sdio_mask); + usdhi6_write(host, USDHI6_SDIO_MODE, 1); + } else { + usdhi6_write(host, USDHI6_SDIO_MODE, 0); + usdhi6_write(host, USDHI6_SDIO_INFO1_MASK, USDHI6_SDIO_INFO1_IRQ); + host->sdio_mask = USDHI6_SDIO_INFO1_IRQ; + } +} + +static struct mmc_host_ops usdhi6_ops = { + .request = usdhi6_request, + .set_ios = usdhi6_set_ios, + .get_cd = usdhi6_get_cd, + .get_ro = usdhi6_get_ro, + .enable_sdio_irq = usdhi6_enable_sdio_irq, +}; + +/* State machine handlers */ + +static void usdhi6_resp_cmd12(struct usdhi6_host *host) +{ + struct mmc_command *cmd = host->mrq->stop; + cmd->resp[0] = usdhi6_read(host, USDHI6_SD_RSP10); +} + +static void usdhi6_resp_read(struct usdhi6_host *host) +{ + struct mmc_command *cmd = host->mrq->cmd; + u32 *rsp = cmd->resp, tmp = 0; + int i; + +/* + * RSP10 39-8 + * RSP32 71-40 + * RSP54 103-72 + * RSP76 127-104 + * R2-type response: + * resp[0] = r[127..96] + * resp[1] = r[95..64] + * resp[2] = r[63..32] + * resp[3] = r[31..0] + * Other responses: + * resp[0] = r[39..8] + */ + + if (mmc_resp_type(cmd) == MMC_RSP_NONE) + return; + + if (!(host->irq_status & USDHI6_SD_INFO1_RSP_END)) { + dev_err(mmc_dev(host->mmc), + "CMD%d: response expected but is missing!\n", cmd->opcode); + return; + } + + if (mmc_resp_type(cmd) & MMC_RSP_136) + for (i = 0; i < 4; i++) { + if (i) + rsp[3 - i] = tmp >> 24; + tmp = usdhi6_read(host, USDHI6_SD_RSP10 + i * 8); + rsp[3 - i] |= tmp << 8; + } + else if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK || + cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK) + /* Read RSP54 to avoid conflict with auto CMD12 */ + rsp[0] = usdhi6_read(host, USDHI6_SD_RSP54); + else + rsp[0] = usdhi6_read(host, USDHI6_SD_RSP10); + + dev_dbg(mmc_dev(host->mmc), "Response 0x%x\n", rsp[0]); +} + +static int usdhi6_blk_read(struct usdhi6_host *host) +{ + struct mmc_data *data = host->mrq->data; + u32 *p; + int i, rest; + + if (host->io_error) { + data->error = usdhi6_error_code(host); + goto error; + } + + if (host->pg.page) { + p = host->blk_page + host->offset; + } else { + p = usdhi6_sg_map(host); + if (!p) { + data->error = -ENOMEM; + goto error; + } + } + + for (i = 0; i < data->blksz / 4; i++, p++) + *p = usdhi6_read(host, USDHI6_SD_BUF0); + + rest = data->blksz % 4; + for (i = 0; i < (rest + 1) / 2; i++) { + u16 d = usdhi6_read16(host, USDHI6_SD_BUF0); + ((u8 *)p)[2 * i] = ((u8 *)&d)[0]; + if (rest > 1 && !i) + ((u8 *)p)[2 * i + 1] = ((u8 *)&d)[1]; + } + + return 0; + +error: + dev_dbg(mmc_dev(host->mmc), "%s(): %d\n", __func__, data->error); + host->wait = USDHI6_WAIT_FOR_REQUEST; + return data->error; +} + +static int usdhi6_blk_write(struct usdhi6_host *host) +{ + struct mmc_data *data = host->mrq->data; + u32 *p; + int i, rest; + + if (host->io_error) { + data->error = usdhi6_error_code(host); + goto error; + } + + if (host->pg.page) { + p = host->blk_page + host->offset; + } else { + p = usdhi6_sg_map(host); + if (!p) { + data->error = -ENOMEM; + goto error; + } + } + + for (i = 0; i < data->blksz / 4; i++, p++) + usdhi6_write(host, USDHI6_SD_BUF0, *p); + + rest = data->blksz % 4; + for (i = 0; i < (rest + 1) / 2; i++) { + u16 d; + ((u8 *)&d)[0] = ((u8 *)p)[2 * i]; + if (rest > 1 && !i) + ((u8 *)&d)[1] = ((u8 *)p)[2 * i + 1]; + else + ((u8 *)&d)[1] = 0; + usdhi6_write16(host, USDHI6_SD_BUF0, d); + } + + return 0; + +error: + dev_dbg(mmc_dev(host->mmc), "%s(): %d\n", __func__, data->error); + host->wait = USDHI6_WAIT_FOR_REQUEST; + return data->error; +} + +static int usdhi6_stop_cmd(struct usdhi6_host *host) +{ + struct mmc_request *mrq = host->mrq; + + switch (mrq->cmd->opcode) { + case MMC_READ_MULTIPLE_BLOCK: + case MMC_WRITE_MULTIPLE_BLOCK: + if (mrq->stop->opcode == MMC_STOP_TRANSMISSION) { + host->wait = USDHI6_WAIT_FOR_STOP; + return 0; + } + /* Unsupported STOP command */ + default: + dev_err(mmc_dev(host->mmc), + "unsupported stop CMD%d for CMD%d\n", + mrq->stop->opcode, mrq->cmd->opcode); + mrq->stop->error = -EOPNOTSUPP; + } + + return -EOPNOTSUPP; +} + +static bool usdhi6_end_cmd(struct usdhi6_host *host) +{ + struct mmc_request *mrq = host->mrq; + struct mmc_command *cmd = mrq->cmd; + + if (host->io_error) { + cmd->error = usdhi6_error_code(host); + return false; + } + + usdhi6_resp_read(host); + + if (!mrq->data) + return false; + + if (host->dma_active) { + usdhi6_dma_kick(host); + if (!mrq->stop) + host->wait = USDHI6_WAIT_FOR_DMA; + else if (usdhi6_stop_cmd(host) < 0) + return false; + } else if (mrq->data->flags & MMC_DATA_READ) { + if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK || + (cmd->opcode == SD_IO_RW_EXTENDED && + mrq->data->blocks > 1)) + host->wait = USDHI6_WAIT_FOR_MREAD; + else + host->wait = USDHI6_WAIT_FOR_READ; + } else { + if (cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK || + (cmd->opcode == SD_IO_RW_EXTENDED && + mrq->data->blocks > 1)) + host->wait = USDHI6_WAIT_FOR_MWRITE; + else + host->wait = USDHI6_WAIT_FOR_WRITE; + } + + return true; +} + +static bool usdhi6_read_block(struct usdhi6_host *host) +{ + /* ACCESS_END IRQ is already unmasked */ + int ret = usdhi6_blk_read(host); + + /* + * Have to force unmapping both pages: the single block could have been + * cross-page, in which case for single-block IO host->page_idx == 0. + * So, if we don't force, the second page won't be unmapped. + */ + usdhi6_sg_unmap(host, true); + + if (ret < 0) + return false; + + host->wait = USDHI6_WAIT_FOR_DATA_END; + return true; +} + +static bool usdhi6_mread_block(struct usdhi6_host *host) +{ + int ret = usdhi6_blk_read(host); + + if (ret < 0) + return false; + + usdhi6_sg_advance(host); + + return !host->mrq->data->error && + (host->wait != USDHI6_WAIT_FOR_DATA_END || !host->mrq->stop); +} + +static bool usdhi6_write_block(struct usdhi6_host *host) +{ + int ret = usdhi6_blk_write(host); + + /* See comment in usdhi6_read_block() */ + usdhi6_sg_unmap(host, true); + + if (ret < 0) + return false; + + host->wait = USDHI6_WAIT_FOR_DATA_END; + return true; +} + +static bool usdhi6_mwrite_block(struct usdhi6_host *host) +{ + int ret = usdhi6_blk_write(host); + + if (ret < 0) + return false; + + usdhi6_sg_advance(host); + + return !host->mrq->data->error && + (host->wait != USDHI6_WAIT_FOR_DATA_END || !host->mrq->stop); +} + +/* Interrupt & timeout handlers */ + +static irqreturn_t usdhi6_sd_bh(int irq, void *dev_id) +{ + struct usdhi6_host *host = dev_id; + struct mmc_request *mrq; + struct mmc_command *cmd; + struct mmc_data *data; + bool io_wait = false; + + cancel_delayed_work_sync(&host->timeout_work); + + mrq = host->mrq; + if (!mrq) + return IRQ_HANDLED; + + cmd = mrq->cmd; + data = mrq->data; + + switch (host->wait) { + case USDHI6_WAIT_FOR_REQUEST: + /* We're too late, the timeout has already kicked in */ + return IRQ_HANDLED; + case USDHI6_WAIT_FOR_CMD: + /* Wait for data? */ + io_wait = usdhi6_end_cmd(host); + break; + case USDHI6_WAIT_FOR_MREAD: + /* Wait for more data? */ + io_wait = usdhi6_mread_block(host); + break; + case USDHI6_WAIT_FOR_READ: + /* Wait for data end? */ + io_wait = usdhi6_read_block(host); + break; + case USDHI6_WAIT_FOR_MWRITE: + /* Wait data to write? */ + io_wait = usdhi6_mwrite_block(host); + break; + case USDHI6_WAIT_FOR_WRITE: + /* Wait for data end? */ + io_wait = usdhi6_write_block(host); + break; + case USDHI6_WAIT_FOR_DMA: + usdhi6_dma_check_error(host); + break; + case USDHI6_WAIT_FOR_STOP: + usdhi6_write(host, USDHI6_SD_STOP, 0); + if (host->io_error) { + int ret = usdhi6_error_code(host); + if (mrq->stop) + mrq->stop->error = ret; + else + mrq->data->error = ret; + dev_warn(mmc_dev(host->mmc), "%s(): %d\n", __func__, ret); + break; + } + usdhi6_resp_cmd12(host); + mrq->stop->error = 0; + break; + case USDHI6_WAIT_FOR_DATA_END: + if (host->io_error) { + mrq->data->error = usdhi6_error_code(host); + dev_warn(mmc_dev(host->mmc), "%s(): %d\n", __func__, + mrq->data->error); + } + break; + default: + cmd->error = -EFAULT; + dev_err(mmc_dev(host->mmc), "Invalid state %u\n", host->wait); + usdhi6_request_done(host); + return IRQ_HANDLED; + } + + if (io_wait) { + schedule_delayed_work(&host->timeout_work, host->timeout); + /* Wait for more data or ACCESS_END */ + if (!host->dma_active) + usdhi6_wait_for_brwe(host, mrq->data->flags & MMC_DATA_READ); + return IRQ_HANDLED; + } + + if (!cmd->error) { + if (data) { + if (!data->error) { + if (host->wait != USDHI6_WAIT_FOR_STOP && + host->mrq->stop && + !host->mrq->stop->error && + !usdhi6_stop_cmd(host)) { + /* Sending STOP */ + usdhi6_wait_for_resp(host); + + schedule_delayed_work(&host->timeout_work, + host->timeout); + + return IRQ_HANDLED; + } + + data->bytes_xfered = data->blocks * data->blksz; + } else { + /* Data error: might need to unmap the last page */ + dev_warn(mmc_dev(host->mmc), "%s(): data error %d\n", + __func__, data->error); + usdhi6_sg_unmap(host, true); + } + } else if (cmd->opcode == MMC_APP_CMD) { + host->app_cmd = true; + } + } + + usdhi6_request_done(host); + + return IRQ_HANDLED; +} + +static irqreturn_t usdhi6_sd(int irq, void *dev_id) +{ + struct usdhi6_host *host = dev_id; + u16 status, status2, error; + + status = usdhi6_read(host, USDHI6_SD_INFO1) & ~host->status_mask & + ~USDHI6_SD_INFO1_CARD; + status2 = usdhi6_read(host, USDHI6_SD_INFO2) & ~host->status2_mask; + + usdhi6_only_cd(host); + + dev_dbg(mmc_dev(host->mmc), + "IRQ status = 0x%08x, status2 = 0x%08x\n", status, status2); + + if (!status && !status2) + return IRQ_NONE; + + error = status2 & USDHI6_SD_INFO2_ERR; + + /* Ack / clear interrupts */ + if (USDHI6_SD_INFO1_IRQ & status) + usdhi6_write(host, USDHI6_SD_INFO1, + 0xffff & ~(USDHI6_SD_INFO1_IRQ & status)); + + if (USDHI6_SD_INFO2_IRQ & status2) { + if (error) + /* In error cases BWE and BRE aren't cleared automatically */ + status2 |= USDHI6_SD_INFO2_BWE | USDHI6_SD_INFO2_BRE; + + usdhi6_write(host, USDHI6_SD_INFO2, + 0xffff & ~(USDHI6_SD_INFO2_IRQ & status2)); + } + + host->io_error = error; + host->irq_status = status; + + if (error) { + /* Don't pollute the log with unsupported command timeouts */ + if (host->wait != USDHI6_WAIT_FOR_CMD || + error != USDHI6_SD_INFO2_RSP_TOUT) + dev_warn(mmc_dev(host->mmc), + "%s(): INFO2 error bits 0x%08x\n", + __func__, error); + else + dev_dbg(mmc_dev(host->mmc), + "%s(): INFO2 error bits 0x%08x\n", + __func__, error); + } + + return IRQ_WAKE_THREAD; +} + +static irqreturn_t usdhi6_sdio(int irq, void *dev_id) +{ + struct usdhi6_host *host = dev_id; + u32 status = usdhi6_read(host, USDHI6_SDIO_INFO1) & ~host->sdio_mask; + + dev_dbg(mmc_dev(host->mmc), "%s(): status 0x%x\n", __func__, status); + + if (!status) + return IRQ_NONE; + + usdhi6_write(host, USDHI6_SDIO_INFO1, ~status); + + mmc_signal_sdio_irq(host->mmc); + + return IRQ_HANDLED; +} + +static irqreturn_t usdhi6_cd(int irq, void *dev_id) +{ + struct usdhi6_host *host = dev_id; + struct mmc_host *mmc = host->mmc; + u16 status; + + /* We're only interested in hotplug events here */ + status = usdhi6_read(host, USDHI6_SD_INFO1) & ~host->status_mask & + USDHI6_SD_INFO1_CARD; + + if (!status) + return IRQ_NONE; + + /* Ack */ + usdhi6_write(host, USDHI6_SD_INFO1, !status); + + if (!work_pending(&mmc->detect.work) && + (((status & USDHI6_SD_INFO1_CARD_INSERT) && + !mmc->card) || + ((status & USDHI6_SD_INFO1_CARD_EJECT) && + mmc->card))) + mmc_detect_change(mmc, msecs_to_jiffies(100)); + + return IRQ_HANDLED; +} + +/* + * Actually this should not be needed, if the built-in timeout works reliably in + * the both PIO cases and DMA never fails. But if DMA does fail, a timeout + * handler might be the only way to catch the error. + */ +static void usdhi6_timeout_work(struct work_struct *work) +{ + struct delayed_work *d = container_of(work, struct delayed_work, work); + struct usdhi6_host *host = container_of(d, struct usdhi6_host, timeout_work); + struct mmc_request *mrq = host->mrq; + struct mmc_data *data = mrq ? mrq->data : NULL; + + dev_warn(mmc_dev(host->mmc), + "%s timeout wait %u CMD%d: IRQ 0x%08x:0x%08x, last IRQ 0x%08x\n", + host->dma_active ? "DMA" : "PIO", + host->wait, mrq ? mrq->cmd->opcode : -1, + usdhi6_read(host, USDHI6_SD_INFO1), + usdhi6_read(host, USDHI6_SD_INFO2), host->irq_status); + + if (host->dma_active) { + usdhi6_dma_kill(host); + usdhi6_dma_stop_unmap(host); + } + + switch (host->wait) { + default: + dev_err(mmc_dev(host->mmc), "Invalid state %u\n", host->wait); + /* mrq can be NULL in this actually impossible case */ + case USDHI6_WAIT_FOR_CMD: + usdhi6_error_code(host); + if (mrq) + mrq->cmd->error = -ETIMEDOUT; + break; + case USDHI6_WAIT_FOR_STOP: + usdhi6_error_code(host); + mrq->stop->error = -ETIMEDOUT; + break; + case USDHI6_WAIT_FOR_DMA: + case USDHI6_WAIT_FOR_MREAD: + case USDHI6_WAIT_FOR_MWRITE: + case USDHI6_WAIT_FOR_READ: + case USDHI6_WAIT_FOR_WRITE: + dev_dbg(mmc_dev(host->mmc), + "%c: page #%u @ +0x%zx %ux%u in SG%u. Current SG %u bytes @ %u\n", + data->flags & MMC_DATA_READ ? 'R' : 'W', host->page_idx, + host->offset, data->blocks, data->blksz, data->sg_len, + sg_dma_len(host->sg), host->sg->offset); + usdhi6_sg_unmap(host, true); + /* + * If USDHI6_WAIT_FOR_DATA_END times out, we have already unmapped + * the page + */ + case USDHI6_WAIT_FOR_DATA_END: + usdhi6_error_code(host); + data->error = -ETIMEDOUT; + } + + if (mrq) + usdhi6_request_done(host); +} + +/* Probe / release */ + +static const struct of_device_id usdhi6_of_match[] = { + {.compatible = "renesas,usdhi6rol0"}, + {} +}; +MODULE_DEVICE_TABLE(of, usdhi6_of_match); + +static int usdhi6_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct mmc_host *mmc; + struct usdhi6_host *host; + struct resource *res; + int irq_cd, irq_sd, irq_sdio; + u32 version; + int ret; + + if (!dev->of_node) + return -ENODEV; + + irq_cd = platform_get_irq_byname(pdev, "card detect"); + irq_sd = platform_get_irq_byname(pdev, "data"); + irq_sdio = platform_get_irq_byname(pdev, "SDIO"); + if (irq_sd < 0 || irq_sdio < 0) + return -ENODEV; + + mmc = mmc_alloc_host(sizeof(struct usdhi6_host), dev); + if (!mmc) + return -ENOMEM; + + ret = mmc_of_parse(mmc); + if (ret < 0) + goto e_free_mmc; + + mmc_regulator_get_supply(mmc); + + host = mmc_priv(mmc); + host->mmc = mmc; + host->wait = USDHI6_WAIT_FOR_REQUEST; + host->timeout = msecs_to_jiffies(4000); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + host->base = devm_ioremap_resource(dev, res); + if (IS_ERR(host->base)) { + ret = PTR_ERR(host->base); + goto e_free_mmc; + } + + host->clk = devm_clk_get(dev, NULL); + if (IS_ERR(host->clk)) + goto e_free_mmc; + + host->imclk = clk_get_rate(host->clk); + + ret = clk_prepare_enable(host->clk); + if (ret < 0) + goto e_free_mmc; + + version = usdhi6_read(host, USDHI6_VERSION); + if ((version & 0xfff) != 0xa0d) { + dev_err(dev, "Version not recognized %x\n", version); + goto e_clk_off; + } + + dev_info(dev, "A USDHI6ROL0 SD host detected with %d ports\n", + usdhi6_read(host, USDHI6_SD_PORT_SEL) >> USDHI6_SD_PORT_SEL_PORTS_SHIFT); + + usdhi6_mask_all(host); + + if (irq_cd >= 0) { + ret = devm_request_irq(dev, irq_cd, usdhi6_cd, 0, + dev_name(dev), host); + if (ret < 0) + goto e_clk_off; + } else { + mmc->caps |= MMC_CAP_NEEDS_POLL; + } + + ret = devm_request_threaded_irq(dev, irq_sd, usdhi6_sd, usdhi6_sd_bh, 0, + dev_name(dev), host); + if (ret < 0) + goto e_clk_off; + + ret = devm_request_irq(dev, irq_sdio, usdhi6_sdio, 0, + dev_name(dev), host); + if (ret < 0) + goto e_clk_off; + + INIT_DELAYED_WORK(&host->timeout_work, usdhi6_timeout_work); + + usdhi6_dma_request(host, res->start); + + mmc->ops = &usdhi6_ops; + mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED | + MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_DDR50 | MMC_CAP_SDIO_IRQ; + /* Set .max_segs to some random number. Feel free to adjust. */ + mmc->max_segs = 32; + mmc->max_blk_size = 512; + mmc->max_req_size = PAGE_CACHE_SIZE * mmc->max_segs; + mmc->max_blk_count = mmc->max_req_size / mmc->max_blk_size; + /* + * Setting .max_seg_size to 1 page would simplify our page-mapping code, + * But OTOH, having large segments makes DMA more efficient. We could + * check, whether we managed to get DMA and fall back to 1 page + * segments, but if we do manage to obtain DMA and then it fails at + * run-time and we fall back to PIO, we will continue getting large + * segments. So, we wouldn't be able to get rid of the code anyway. + */ + mmc->max_seg_size = mmc->max_req_size; + if (!mmc->f_max) + mmc->f_max = host->imclk; + mmc->f_min = host->imclk / 512; + + platform_set_drvdata(pdev, host); + + ret = mmc_add_host(mmc); + if (ret < 0) + goto e_clk_off; + + return 0; + +e_clk_off: + clk_disable_unprepare(host->clk); +e_free_mmc: + mmc_free_host(mmc); + + return ret; +} + +static int usdhi6_remove(struct platform_device *pdev) +{ + struct usdhi6_host *host = platform_get_drvdata(pdev); + + mmc_remove_host(host->mmc); + + usdhi6_mask_all(host); + cancel_delayed_work_sync(&host->timeout_work); + usdhi6_dma_release(host); + clk_disable_unprepare(host->clk); + mmc_free_host(host->mmc); + + return 0; +} + +static struct platform_driver usdhi6_driver = { + .probe = usdhi6_probe, + .remove = usdhi6_remove, + .driver = { + .name = "usdhi6rol0", + .owner = THIS_MODULE, + .of_match_table = usdhi6_of_match, + }, +}; + +module_platform_driver(usdhi6_driver); + +MODULE_DESCRIPTION("Renesas usdhi6rol0 SD/SDIO host driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:usdhi6rol0"); +MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>"); diff --git a/drivers/mmc/host/ushc.c b/drivers/mmc/host/ushc.c index b4ead4a13c9..d2c386f09d6 100644 --- a/drivers/mmc/host/ushc.c +++ b/drivers/mmc/host/ushc.c @@ -19,7 +19,6 @@ #include <linux/module.h> #include <linux/usb.h> #include <linux/kernel.h> -#include <linux/usb.h> #include <linux/slab.h> #include <linux/dma-mapping.h> #include <linux/mmc/host.h> @@ -425,7 +424,7 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id struct usb_device *usb_dev = interface_to_usbdev(intf); struct mmc_host *mmc; struct ushc_data *ushc; - int ret = -ENOMEM; + int ret; mmc = mmc_alloc_host(sizeof(struct ushc_data), &intf->dev); if (mmc == NULL) @@ -462,11 +461,15 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id mmc->max_blk_count = 511; ushc->int_urb = usb_alloc_urb(0, GFP_KERNEL); - if (ushc->int_urb == NULL) + if (ushc->int_urb == NULL) { + ret = -ENOMEM; goto err; + } ushc->int_data = kzalloc(sizeof(struct ushc_int_data), GFP_KERNEL); - if (ushc->int_data == NULL) + if (ushc->int_data == NULL) { + ret = -ENOMEM; goto err; + } usb_fill_int_urb(ushc->int_urb, ushc->usb_dev, usb_rcvintpipe(usb_dev, intf->cur_altsetting->endpoint[0].desc.bEndpointAddress), @@ -475,11 +478,15 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id intf->cur_altsetting->endpoint[0].desc.bInterval); ushc->cbw_urb = usb_alloc_urb(0, GFP_KERNEL); - if (ushc->cbw_urb == NULL) + if (ushc->cbw_urb == NULL) { + ret = -ENOMEM; goto err; + } ushc->cbw = kzalloc(sizeof(struct ushc_cbw), GFP_KERNEL); - if (ushc->cbw == NULL) + if (ushc->cbw == NULL) { + ret = -ENOMEM; goto err; + } ushc->cbw->signature = USHC_CBW_SIGNATURE; usb_fill_bulk_urb(ushc->cbw_urb, ushc->usb_dev, usb_sndbulkpipe(usb_dev, 2), @@ -487,15 +494,21 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id cbw_callback, ushc); ushc->data_urb = usb_alloc_urb(0, GFP_KERNEL); - if (ushc->data_urb == NULL) + if (ushc->data_urb == NULL) { + ret = -ENOMEM; goto err; + } ushc->csw_urb = usb_alloc_urb(0, GFP_KERNEL); - if (ushc->csw_urb == NULL) + if (ushc->csw_urb == NULL) { + ret = -ENOMEM; goto err; - ushc->csw = kzalloc(sizeof(struct ushc_cbw), GFP_KERNEL); - if (ushc->csw == NULL) + } + ushc->csw = kzalloc(sizeof(struct ushc_csw), GFP_KERNEL); + if (ushc->csw == NULL) { + ret = -ENOMEM; goto err; + } usb_fill_bulk_urb(ushc->csw_urb, ushc->usb_dev, usb_rcvbulkpipe(usb_dev, 6), ushc->csw, sizeof(struct ushc_csw), csw_callback, ushc); @@ -549,17 +562,7 @@ static struct usb_driver ushc_driver = { .disconnect = ushc_disconnect, }; -static int __init ushc_init(void) -{ - return usb_register(&ushc_driver); -} -module_init(ushc_init); - -static void __exit ushc_exit(void) -{ - usb_deregister(&ushc_driver); -} -module_exit(ushc_exit); +module_usb_driver(ushc_driver); MODULE_DESCRIPTION("USB SD Host Controller driver"); MODULE_AUTHOR("David Vrabel <david.vrabel@csr.com>"); diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c index 9ed84ddb478..63fac78b3d4 100644 --- a/drivers/mmc/host/via-sdmmc.c +++ b/drivers/mmc/host/via-sdmmc.c @@ -9,6 +9,7 @@ */ #include <linux/pci.h> +#include <linux/module.h> #include <linux/dma-mapping.h> #include <linux/highmem.h> #include <linux/delay.h> @@ -802,12 +803,9 @@ static const struct mmc_host_ops via_sdc_ops = { static void via_reset_pcictrl(struct via_crdr_mmc_host *host) { - void __iomem *addrbase; unsigned long flags; u8 gatt; - addrbase = host->pcictrl_mmiobase; - spin_lock_irqsave(&host->lock, flags); via_save_pcictrlreg(host); @@ -1084,20 +1082,19 @@ static void via_init_mmc_host(struct via_crdr_mmc_host *host) msleep(1); } -static int __devinit via_sd_probe(struct pci_dev *pcidev, +static int via_sd_probe(struct pci_dev *pcidev, const struct pci_device_id *id) { struct mmc_host *mmc; struct via_crdr_mmc_host *sdhost; u32 base, len; - u8 rev, gatt; + u8 gatt; int ret; - pci_read_config_byte(pcidev, PCI_CLASS_REVISION, &rev); pr_info(DRV_NAME ": VIA SDMMC controller found at %s [%04x:%04x] (rev %x)\n", pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device, - (int)rev); + (int)pcidev->revision); ret = pci_enable_device(pcidev); if (ret) @@ -1179,7 +1176,7 @@ disable: return ret; } -static void __devexit via_sd_remove(struct pci_dev *pcidev) +static void via_sd_remove(struct pci_dev *pcidev) { struct via_crdr_mmc_host *sdhost = pci_get_drvdata(pcidev); unsigned long flags; @@ -1195,7 +1192,7 @@ static void __devexit via_sd_remove(struct pci_dev *pcidev) mmiowb(); if (sdhost->mrq) { - printk(KERN_ERR "%s: Controller removed during " + pr_err("%s: Controller removed during " "transfer\n", mmc_hostname(sdhost->mmc)); /* make sure all DMA is stopped */ @@ -1272,21 +1269,18 @@ static void via_init_sdc_pm(struct via_crdr_mmc_host *host) static int via_sd_suspend(struct pci_dev *pcidev, pm_message_t state) { struct via_crdr_mmc_host *host; - int ret = 0; host = pci_get_drvdata(pcidev); via_save_pcictrlreg(host); via_save_sdcreg(host); - ret = mmc_suspend_host(host->mmc); - pci_save_state(pcidev); pci_enable_wake(pcidev, pci_choose_state(pcidev, state), 0); pci_disable_device(pcidev); pci_set_power_state(pcidev, pci_choose_state(pcidev, state)); - return ret; + return 0; } static int via_sd_resume(struct pci_dev *pcidev) @@ -1319,8 +1313,6 @@ static int via_sd_resume(struct pci_dev *pcidev) via_restore_pcictrlreg(sdhost); via_init_sdc_pm(sdhost); - ret = mmc_resume_host(sdhost->mmc); - return ret; } @@ -1335,26 +1327,12 @@ static struct pci_driver via_sd_driver = { .name = DRV_NAME, .id_table = via_ids, .probe = via_sd_probe, - .remove = __devexit_p(via_sd_remove), + .remove = via_sd_remove, .suspend = via_sd_suspend, .resume = via_sd_resume, }; -static int __init via_sd_drv_init(void) -{ - pr_info(DRV_NAME ": VIA SD/MMC Card Reader driver " - "(C) 2008 VIA Technologies, Inc.\n"); - - return pci_register_driver(&via_sd_driver); -} - -static void __exit via_sd_drv_exit(void) -{ - pci_unregister_driver(&via_sd_driver); -} - -module_init(via_sd_drv_init); -module_exit(via_sd_drv_exit); +module_pci_driver(via_sd_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("VIA Technologies Inc."); diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c new file mode 100644 index 00000000000..4262296c12f --- /dev/null +++ b/drivers/mmc/host/vub300.c @@ -0,0 +1,2490 @@ +/* + * Remote VUB300 SDIO/SDmem Host Controller Driver + * + * Copyright (C) 2010 Elan Digital Systems Limited + * + * based on USB Skeleton driver - 2.2 + * + * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2 + * + * VUB300: is a USB 2.0 client device with a single SDIO/SDmem/MMC slot + * Any SDIO/SDmem/MMC device plugged into the VUB300 will appear, + * by virtue of this driver, to have been plugged into a local + * SDIO host controller, similar to, say, a PCI Ricoh controller + * This is because this kernel device driver is both a USB 2.0 + * client device driver AND an MMC host controller driver. Thus + * if there is an existing driver for the inserted SDIO/SDmem/MMC + * device then that driver will be used by the kernel to manage + * the device in exactly the same fashion as if it had been + * directly plugged into, say, a local pci bus Ricoh controller + * + * RANT: this driver was written using a display 128x48 - converting it + * to a line width of 80 makes it very difficult to support. In + * particular functions have been broken down into sub functions + * and the original meaningful names have been shortened into + * cryptic ones. + * The problem is that executing a fragment of code subject to + * two conditions means an indentation of 24, thus leaving only + * 56 characters for a C statement. And that is quite ridiculous! + * + * Data types: data passed to/from the VUB300 is fixed to a number of + * bits and driver data fields reflect that limit by using + * u8, u16, u32 + */ +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/kref.h> +#include <linux/uaccess.h> +#include <linux/usb.h> +#include <linux/mutex.h> +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> +#include <linux/mmc/sdio_func.h> +#include <linux/mmc/sdio_ids.h> +#include <linux/workqueue.h> +#include <linux/ctype.h> +#include <linux/firmware.h> +#include <linux/scatterlist.h> + +struct host_controller_info { + u8 info_size; + u16 firmware_version; + u8 number_of_ports; +} __packed; + +#define FIRMWARE_BLOCK_BOUNDARY 1024 +struct sd_command_header { + u8 header_size; + u8 header_type; + u8 port_number; + u8 command_type; /* Bit7 - Rd/Wr */ + u8 command_index; + u8 transfer_size[4]; /* ReadSize + ReadSize */ + u8 response_type; + u8 arguments[4]; + u8 block_count[2]; + u8 block_size[2]; + u8 block_boundary[2]; + u8 reserved[44]; /* to pad out to 64 bytes */ +} __packed; + +struct sd_irqpoll_header { + u8 header_size; + u8 header_type; + u8 port_number; + u8 command_type; /* Bit7 - Rd/Wr */ + u8 padding[16]; /* don't ask why !! */ + u8 poll_timeout_msb; + u8 poll_timeout_lsb; + u8 reserved[42]; /* to pad out to 64 bytes */ +} __packed; + +struct sd_common_header { + u8 header_size; + u8 header_type; + u8 port_number; +} __packed; + +struct sd_response_header { + u8 header_size; + u8 header_type; + u8 port_number; + u8 command_type; + u8 command_index; + u8 command_response[0]; +} __packed; + +struct sd_status_header { + u8 header_size; + u8 header_type; + u8 port_number; + u16 port_flags; + u32 sdio_clock; + u16 host_header_size; + u16 func_header_size; + u16 ctrl_header_size; +} __packed; + +struct sd_error_header { + u8 header_size; + u8 header_type; + u8 port_number; + u8 error_code; +} __packed; + +struct sd_interrupt_header { + u8 header_size; + u8 header_type; + u8 port_number; +} __packed; + +struct offload_registers_access { + u8 command_byte[4]; + u8 Respond_Byte[4]; +} __packed; + +#define INTERRUPT_REGISTER_ACCESSES 15 +struct sd_offloaded_interrupt { + u8 header_size; + u8 header_type; + u8 port_number; + struct offload_registers_access reg[INTERRUPT_REGISTER_ACCESSES]; +} __packed; + +struct sd_register_header { + u8 header_size; + u8 header_type; + u8 port_number; + u8 command_type; + u8 command_index; + u8 command_response[6]; +} __packed; + +#define PIGGYBACK_REGISTER_ACCESSES 14 +struct sd_offloaded_piggyback { + struct sd_register_header sdio; + struct offload_registers_access reg[PIGGYBACK_REGISTER_ACCESSES]; +} __packed; + +union sd_response { + struct sd_common_header common; + struct sd_status_header status; + struct sd_error_header error; + struct sd_interrupt_header interrupt; + struct sd_response_header response; + struct sd_offloaded_interrupt irq; + struct sd_offloaded_piggyback pig; +} __packed; + +union sd_command { + struct sd_command_header head; + struct sd_irqpoll_header poll; +} __packed; + +enum SD_RESPONSE_TYPE { + SDRT_UNSPECIFIED = 0, + SDRT_NONE, + SDRT_1, + SDRT_1B, + SDRT_2, + SDRT_3, + SDRT_4, + SDRT_5, + SDRT_5B, + SDRT_6, + SDRT_7, +}; + +#define RESPONSE_INTERRUPT 0x01 +#define RESPONSE_ERROR 0x02 +#define RESPONSE_STATUS 0x03 +#define RESPONSE_IRQ_DISABLED 0x05 +#define RESPONSE_IRQ_ENABLED 0x06 +#define RESPONSE_PIGGYBACKED 0x07 +#define RESPONSE_NO_INTERRUPT 0x08 +#define RESPONSE_PIG_DISABLED 0x09 +#define RESPONSE_PIG_ENABLED 0x0A +#define SD_ERROR_1BIT_TIMEOUT 0x01 +#define SD_ERROR_4BIT_TIMEOUT 0x02 +#define SD_ERROR_1BIT_CRC_WRONG 0x03 +#define SD_ERROR_4BIT_CRC_WRONG 0x04 +#define SD_ERROR_1BIT_CRC_ERROR 0x05 +#define SD_ERROR_4BIT_CRC_ERROR 0x06 +#define SD_ERROR_NO_CMD_ENDBIT 0x07 +#define SD_ERROR_NO_1BIT_DATEND 0x08 +#define SD_ERROR_NO_4BIT_DATEND 0x09 +#define SD_ERROR_1BIT_UNEXPECTED_TIMEOUT 0x0A +#define SD_ERROR_4BIT_UNEXPECTED_TIMEOUT 0x0B +#define SD_ERROR_ILLEGAL_COMMAND 0x0C +#define SD_ERROR_NO_DEVICE 0x0D +#define SD_ERROR_TRANSFER_LENGTH 0x0E +#define SD_ERROR_1BIT_DATA_TIMEOUT 0x0F +#define SD_ERROR_4BIT_DATA_TIMEOUT 0x10 +#define SD_ERROR_ILLEGAL_STATE 0x11 +#define SD_ERROR_UNKNOWN_ERROR 0x12 +#define SD_ERROR_RESERVED_ERROR 0x13 +#define SD_ERROR_INVALID_FUNCTION 0x14 +#define SD_ERROR_OUT_OF_RANGE 0x15 +#define SD_ERROR_STAT_CMD 0x16 +#define SD_ERROR_STAT_DATA 0x17 +#define SD_ERROR_STAT_CMD_TIMEOUT 0x18 +#define SD_ERROR_SDCRDY_STUCK 0x19 +#define SD_ERROR_UNHANDLED 0x1A +#define SD_ERROR_OVERRUN 0x1B +#define SD_ERROR_PIO_TIMEOUT 0x1C + +#define FUN(c) (0x000007 & (c->arg>>28)) +#define REG(c) (0x01FFFF & (c->arg>>9)) + +static bool limit_speed_to_24_MHz; +module_param(limit_speed_to_24_MHz, bool, 0644); +MODULE_PARM_DESC(limit_speed_to_24_MHz, "Limit Max SDIO Clock Speed to 24 MHz"); + +static bool pad_input_to_usb_pkt; +module_param(pad_input_to_usb_pkt, bool, 0644); +MODULE_PARM_DESC(pad_input_to_usb_pkt, + "Pad USB data input transfers to whole USB Packet"); + +static bool disable_offload_processing; +module_param(disable_offload_processing, bool, 0644); +MODULE_PARM_DESC(disable_offload_processing, "Disable Offload Processing"); + +static bool force_1_bit_data_xfers; +module_param(force_1_bit_data_xfers, bool, 0644); +MODULE_PARM_DESC(force_1_bit_data_xfers, + "Force SDIO Data Transfers to 1-bit Mode"); + +static bool force_polling_for_irqs; +module_param(force_polling_for_irqs, bool, 0644); +MODULE_PARM_DESC(force_polling_for_irqs, "Force Polling for SDIO interrupts"); + +static int firmware_irqpoll_timeout = 1024; +module_param(firmware_irqpoll_timeout, int, 0644); +MODULE_PARM_DESC(firmware_irqpoll_timeout, "VUB300 firmware irqpoll timeout"); + +static int force_max_req_size = 128; +module_param(force_max_req_size, int, 0644); +MODULE_PARM_DESC(force_max_req_size, "set max request size in kBytes"); + +#ifdef SMSC_DEVELOPMENT_BOARD +static int firmware_rom_wait_states = 0x04; +#else +static int firmware_rom_wait_states = 0x1C; +#endif + +module_param(firmware_rom_wait_states, int, 0644); +MODULE_PARM_DESC(firmware_rom_wait_states, + "ROM wait states byte=RRRIIEEE (Reserved Internal External)"); + +#define ELAN_VENDOR_ID 0x2201 +#define VUB300_VENDOR_ID 0x0424 +#define VUB300_PRODUCT_ID 0x012C +static struct usb_device_id vub300_table[] = { + {USB_DEVICE(ELAN_VENDOR_ID, VUB300_PRODUCT_ID)}, + {USB_DEVICE(VUB300_VENDOR_ID, VUB300_PRODUCT_ID)}, + {} /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, vub300_table); + +static struct workqueue_struct *cmndworkqueue; +static struct workqueue_struct *pollworkqueue; +static struct workqueue_struct *deadworkqueue; + +static inline int interface_to_InterfaceNumber(struct usb_interface *interface) +{ + if (!interface) + return -1; + if (!interface->cur_altsetting) + return -1; + return interface->cur_altsetting->desc.bInterfaceNumber; +} + +struct sdio_register { + unsigned func_num:3; + unsigned sdio_reg:17; + unsigned activate:1; + unsigned prepared:1; + unsigned regvalue:8; + unsigned response:8; + unsigned sparebit:26; +}; + +struct vub300_mmc_host { + struct usb_device *udev; + struct usb_interface *interface; + struct kref kref; + struct mutex cmd_mutex; + struct mutex irq_mutex; + char vub_name[3 + (9 * 8) + 4 + 1]; /* max of 7 sdio fn's */ + u8 cmnd_out_ep; /* EndPoint for commands */ + u8 cmnd_res_ep; /* EndPoint for responses */ + u8 data_out_ep; /* EndPoint for out data */ + u8 data_inp_ep; /* EndPoint for inp data */ + bool card_powered; + bool card_present; + bool read_only; + bool large_usb_packets; + bool app_spec; /* ApplicationSpecific */ + bool irq_enabled; /* by the MMC CORE */ + bool irq_disabled; /* in the firmware */ + unsigned bus_width:4; + u8 total_offload_count; + u8 dynamic_register_count; + u8 resp_len; + u32 datasize; + int errors; + int usb_transport_fail; + int usb_timed_out; + int irqs_queued; + struct sdio_register sdio_register[16]; + struct offload_interrupt_function_register { +#define MAXREGBITS 4 +#define MAXREGS (1<<MAXREGBITS) +#define MAXREGMASK (MAXREGS-1) + u8 offload_count; + u32 offload_point; + struct offload_registers_access reg[MAXREGS]; + } fn[8]; + u16 fbs[8]; /* Function Block Size */ + struct mmc_command *cmd; + struct mmc_request *req; + struct mmc_data *data; + struct mmc_host *mmc; + struct urb *urb; + struct urb *command_out_urb; + struct urb *command_res_urb; + struct completion command_complete; + struct completion irqpoll_complete; + union sd_command cmnd; + union sd_response resp; + struct timer_list sg_transfer_timer; + struct usb_sg_request sg_request; + struct timer_list inactivity_timer; + struct work_struct deadwork; + struct work_struct cmndwork; + struct delayed_work pollwork; + struct host_controller_info hc_info; + struct sd_status_header system_port_status; + u8 padded_buffer[64]; +}; + +#define kref_to_vub300_mmc_host(d) container_of(d, struct vub300_mmc_host, kref) +#define SET_TRANSFER_PSEUDOCODE 21 +#define SET_INTERRUPT_PSEUDOCODE 20 +#define SET_FAILURE_MODE 18 +#define SET_ROM_WAIT_STATES 16 +#define SET_IRQ_ENABLE 13 +#define SET_CLOCK_SPEED 11 +#define SET_FUNCTION_BLOCK_SIZE 9 +#define SET_SD_DATA_MODE 6 +#define SET_SD_POWER 4 +#define ENTER_DFU_MODE 3 +#define GET_HC_INF0 1 +#define GET_SYSTEM_PORT_STATUS 0 + +static void vub300_delete(struct kref *kref) +{ /* kref callback - softirq */ + struct vub300_mmc_host *vub300 = kref_to_vub300_mmc_host(kref); + struct mmc_host *mmc = vub300->mmc; + usb_free_urb(vub300->command_out_urb); + vub300->command_out_urb = NULL; + usb_free_urb(vub300->command_res_urb); + vub300->command_res_urb = NULL; + usb_put_dev(vub300->udev); + mmc_free_host(mmc); + /* + * and hence also frees vub300 + * which is contained at the end of struct mmc + */ +} + +static void vub300_queue_cmnd_work(struct vub300_mmc_host *vub300) +{ + kref_get(&vub300->kref); + if (queue_work(cmndworkqueue, &vub300->cmndwork)) { + /* + * then the cmndworkqueue was not previously + * running and the above get ref is obvious + * required and will be put when the thread + * terminates by a specific call + */ + } else { + /* + * the cmndworkqueue was already running from + * a previous invocation and thus to keep the + * kref counts correct we must undo the get + */ + kref_put(&vub300->kref, vub300_delete); + } +} + +static void vub300_queue_poll_work(struct vub300_mmc_host *vub300, int delay) +{ + kref_get(&vub300->kref); + if (queue_delayed_work(pollworkqueue, &vub300->pollwork, delay)) { + /* + * then the pollworkqueue was not previously + * running and the above get ref is obvious + * required and will be put when the thread + * terminates by a specific call + */ + } else { + /* + * the pollworkqueue was already running from + * a previous invocation and thus to keep the + * kref counts correct we must undo the get + */ + kref_put(&vub300->kref, vub300_delete); + } +} + +static void vub300_queue_dead_work(struct vub300_mmc_host *vub300) +{ + kref_get(&vub300->kref); + if (queue_work(deadworkqueue, &vub300->deadwork)) { + /* + * then the deadworkqueue was not previously + * running and the above get ref is obvious + * required and will be put when the thread + * terminates by a specific call + */ + } else { + /* + * the deadworkqueue was already running from + * a previous invocation and thus to keep the + * kref counts correct we must undo the get + */ + kref_put(&vub300->kref, vub300_delete); + } +} + +static void irqpoll_res_completed(struct urb *urb) +{ /* urb completion handler - hardirq */ + struct vub300_mmc_host *vub300 = (struct vub300_mmc_host *)urb->context; + if (urb->status) + vub300->usb_transport_fail = urb->status; + complete(&vub300->irqpoll_complete); +} + +static void irqpoll_out_completed(struct urb *urb) +{ /* urb completion handler - hardirq */ + struct vub300_mmc_host *vub300 = (struct vub300_mmc_host *)urb->context; + if (urb->status) { + vub300->usb_transport_fail = urb->status; + complete(&vub300->irqpoll_complete); + return; + } else { + int ret; + unsigned int pipe = + usb_rcvbulkpipe(vub300->udev, vub300->cmnd_res_ep); + usb_fill_bulk_urb(vub300->command_res_urb, vub300->udev, pipe, + &vub300->resp, sizeof(vub300->resp), + irqpoll_res_completed, vub300); + vub300->command_res_urb->actual_length = 0; + ret = usb_submit_urb(vub300->command_res_urb, GFP_ATOMIC); + if (ret) { + vub300->usb_transport_fail = ret; + complete(&vub300->irqpoll_complete); + } + return; + } +} + +static void send_irqpoll(struct vub300_mmc_host *vub300) +{ + /* cmd_mutex is held by vub300_pollwork_thread */ + int retval; + int timeout = 0xFFFF & (0x0001FFFF - firmware_irqpoll_timeout); + vub300->cmnd.poll.header_size = 22; + vub300->cmnd.poll.header_type = 1; + vub300->cmnd.poll.port_number = 0; + vub300->cmnd.poll.command_type = 2; + vub300->cmnd.poll.poll_timeout_lsb = 0xFF & (unsigned)timeout; + vub300->cmnd.poll.poll_timeout_msb = 0xFF & (unsigned)(timeout >> 8); + usb_fill_bulk_urb(vub300->command_out_urb, vub300->udev, + usb_sndbulkpipe(vub300->udev, vub300->cmnd_out_ep) + , &vub300->cmnd, sizeof(vub300->cmnd) + , irqpoll_out_completed, vub300); + retval = usb_submit_urb(vub300->command_out_urb, GFP_KERNEL); + if (0 > retval) { + vub300->usb_transport_fail = retval; + vub300_queue_poll_work(vub300, 1); + complete(&vub300->irqpoll_complete); + return; + } else { + return; + } +} + +static void new_system_port_status(struct vub300_mmc_host *vub300) +{ + int old_card_present = vub300->card_present; + int new_card_present = + (0x0001 & vub300->system_port_status.port_flags) ? 1 : 0; + vub300->read_only = + (0x0010 & vub300->system_port_status.port_flags) ? 1 : 0; + if (new_card_present && !old_card_present) { + dev_info(&vub300->udev->dev, "card just inserted\n"); + vub300->card_present = 1; + vub300->bus_width = 0; + if (disable_offload_processing) + strncpy(vub300->vub_name, "EMPTY Processing Disabled", + sizeof(vub300->vub_name)); + else + vub300->vub_name[0] = 0; + mmc_detect_change(vub300->mmc, 1); + } else if (!new_card_present && old_card_present) { + dev_info(&vub300->udev->dev, "card just ejected\n"); + vub300->card_present = 0; + mmc_detect_change(vub300->mmc, 0); + } else { + /* no change */ + } +} + +static void __add_offloaded_reg_to_fifo(struct vub300_mmc_host *vub300, + struct offload_registers_access + *register_access, u8 func) +{ + u8 r = vub300->fn[func].offload_point + vub300->fn[func].offload_count; + memcpy(&vub300->fn[func].reg[MAXREGMASK & r], register_access, + sizeof(struct offload_registers_access)); + vub300->fn[func].offload_count += 1; + vub300->total_offload_count += 1; +} + +static void add_offloaded_reg(struct vub300_mmc_host *vub300, + struct offload_registers_access *register_access) +{ + u32 Register = ((0x03 & register_access->command_byte[0]) << 15) + | ((0xFF & register_access->command_byte[1]) << 7) + | ((0xFE & register_access->command_byte[2]) >> 1); + u8 func = ((0x70 & register_access->command_byte[0]) >> 4); + u8 regs = vub300->dynamic_register_count; + u8 i = 0; + while (0 < regs-- && 1 == vub300->sdio_register[i].activate) { + if (vub300->sdio_register[i].func_num == func && + vub300->sdio_register[i].sdio_reg == Register) { + if (vub300->sdio_register[i].prepared == 0) + vub300->sdio_register[i].prepared = 1; + vub300->sdio_register[i].response = + register_access->Respond_Byte[2]; + vub300->sdio_register[i].regvalue = + register_access->Respond_Byte[3]; + return; + } else { + i += 1; + continue; + } + }; + __add_offloaded_reg_to_fifo(vub300, register_access, func); +} + +static void check_vub300_port_status(struct vub300_mmc_host *vub300) +{ + /* + * cmd_mutex is held by vub300_pollwork_thread, + * vub300_deadwork_thread or vub300_cmndwork_thread + */ + int retval; + retval = + usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0), + GET_SYSTEM_PORT_STATUS, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0x0000, 0x0000, &vub300->system_port_status, + sizeof(vub300->system_port_status), HZ); + if (sizeof(vub300->system_port_status) == retval) + new_system_port_status(vub300); +} + +static void __vub300_irqpoll_response(struct vub300_mmc_host *vub300) +{ + /* cmd_mutex is held by vub300_pollwork_thread */ + if (vub300->command_res_urb->actual_length == 0) + return; + + switch (vub300->resp.common.header_type) { + case RESPONSE_INTERRUPT: + mutex_lock(&vub300->irq_mutex); + if (vub300->irq_enabled) + mmc_signal_sdio_irq(vub300->mmc); + else + vub300->irqs_queued += 1; + vub300->irq_disabled = 1; + mutex_unlock(&vub300->irq_mutex); + break; + case RESPONSE_ERROR: + if (vub300->resp.error.error_code == SD_ERROR_NO_DEVICE) + check_vub300_port_status(vub300); + break; + case RESPONSE_STATUS: + vub300->system_port_status = vub300->resp.status; + new_system_port_status(vub300); + if (!vub300->card_present) + vub300_queue_poll_work(vub300, HZ / 5); + break; + case RESPONSE_IRQ_DISABLED: + { + int offloaded_data_length = vub300->resp.common.header_size - 3; + int register_count = offloaded_data_length >> 3; + int ri = 0; + while (register_count--) { + add_offloaded_reg(vub300, &vub300->resp.irq.reg[ri]); + ri += 1; + } + mutex_lock(&vub300->irq_mutex); + if (vub300->irq_enabled) + mmc_signal_sdio_irq(vub300->mmc); + else + vub300->irqs_queued += 1; + vub300->irq_disabled = 1; + mutex_unlock(&vub300->irq_mutex); + break; + } + case RESPONSE_IRQ_ENABLED: + { + int offloaded_data_length = vub300->resp.common.header_size - 3; + int register_count = offloaded_data_length >> 3; + int ri = 0; + while (register_count--) { + add_offloaded_reg(vub300, &vub300->resp.irq.reg[ri]); + ri += 1; + } + mutex_lock(&vub300->irq_mutex); + if (vub300->irq_enabled) + mmc_signal_sdio_irq(vub300->mmc); + else if (vub300->irqs_queued) + vub300->irqs_queued += 1; + else + vub300->irqs_queued += 1; + vub300->irq_disabled = 0; + mutex_unlock(&vub300->irq_mutex); + break; + } + case RESPONSE_NO_INTERRUPT: + vub300_queue_poll_work(vub300, 1); + break; + default: + break; + } +} + +static void __do_poll(struct vub300_mmc_host *vub300) +{ + /* cmd_mutex is held by vub300_pollwork_thread */ + long commretval; + mod_timer(&vub300->inactivity_timer, jiffies + HZ); + init_completion(&vub300->irqpoll_complete); + send_irqpoll(vub300); + commretval = wait_for_completion_timeout(&vub300->irqpoll_complete, + msecs_to_jiffies(500)); + if (vub300->usb_transport_fail) { + /* no need to do anything */ + } else if (commretval == 0) { + vub300->usb_timed_out = 1; + usb_kill_urb(vub300->command_out_urb); + usb_kill_urb(vub300->command_res_urb); + } else if (commretval < 0) { + vub300_queue_poll_work(vub300, 1); + } else { /* commretval > 0 */ + __vub300_irqpoll_response(vub300); + } +} + +/* this thread runs only when the driver + * is trying to poll the device for an IRQ + */ +static void vub300_pollwork_thread(struct work_struct *work) +{ /* NOT irq */ + struct vub300_mmc_host *vub300 = container_of(work, + struct vub300_mmc_host, pollwork.work); + if (!vub300->interface) { + kref_put(&vub300->kref, vub300_delete); + return; + } + mutex_lock(&vub300->cmd_mutex); + if (vub300->cmd) { + vub300_queue_poll_work(vub300, 1); + } else if (!vub300->card_present) { + /* no need to do anything */ + } else { /* vub300->card_present */ + mutex_lock(&vub300->irq_mutex); + if (!vub300->irq_enabled) { + mutex_unlock(&vub300->irq_mutex); + } else if (vub300->irqs_queued) { + vub300->irqs_queued -= 1; + mmc_signal_sdio_irq(vub300->mmc); + mod_timer(&vub300->inactivity_timer, jiffies + HZ); + mutex_unlock(&vub300->irq_mutex); + } else { /* NOT vub300->irqs_queued */ + mutex_unlock(&vub300->irq_mutex); + __do_poll(vub300); + } + } + mutex_unlock(&vub300->cmd_mutex); + kref_put(&vub300->kref, vub300_delete); +} + +static void vub300_deadwork_thread(struct work_struct *work) +{ /* NOT irq */ + struct vub300_mmc_host *vub300 = + container_of(work, struct vub300_mmc_host, deadwork); + if (!vub300->interface) { + kref_put(&vub300->kref, vub300_delete); + return; + } + mutex_lock(&vub300->cmd_mutex); + if (vub300->cmd) { + /* + * a command got in as the inactivity + * timer expired - so we just let the + * processing of the command show if + * the device is dead + */ + } else if (vub300->card_present) { + check_vub300_port_status(vub300); + } else if (vub300->mmc && vub300->mmc->card && + mmc_card_present(vub300->mmc->card)) { + /* + * the MMC core must not have responded + * to the previous indication - lets + * hope that it eventually does so we + * will just ignore this for now + */ + } else { + check_vub300_port_status(vub300); + } + mod_timer(&vub300->inactivity_timer, jiffies + HZ); + mutex_unlock(&vub300->cmd_mutex); + kref_put(&vub300->kref, vub300_delete); +} + +static void vub300_inactivity_timer_expired(unsigned long data) +{ /* softirq */ + struct vub300_mmc_host *vub300 = (struct vub300_mmc_host *)data; + if (!vub300->interface) { + kref_put(&vub300->kref, vub300_delete); + } else if (vub300->cmd) { + mod_timer(&vub300->inactivity_timer, jiffies + HZ); + } else { + vub300_queue_dead_work(vub300); + mod_timer(&vub300->inactivity_timer, jiffies + HZ); + } +} + +static int vub300_response_error(u8 error_code) +{ + switch (error_code) { + case SD_ERROR_PIO_TIMEOUT: + case SD_ERROR_1BIT_TIMEOUT: + case SD_ERROR_4BIT_TIMEOUT: + return -ETIMEDOUT; + case SD_ERROR_STAT_DATA: + case SD_ERROR_OVERRUN: + case SD_ERROR_STAT_CMD: + case SD_ERROR_STAT_CMD_TIMEOUT: + case SD_ERROR_SDCRDY_STUCK: + case SD_ERROR_UNHANDLED: + case SD_ERROR_1BIT_CRC_WRONG: + case SD_ERROR_4BIT_CRC_WRONG: + case SD_ERROR_1BIT_CRC_ERROR: + case SD_ERROR_4BIT_CRC_ERROR: + case SD_ERROR_NO_CMD_ENDBIT: + case SD_ERROR_NO_1BIT_DATEND: + case SD_ERROR_NO_4BIT_DATEND: + case SD_ERROR_1BIT_DATA_TIMEOUT: + case SD_ERROR_4BIT_DATA_TIMEOUT: + case SD_ERROR_1BIT_UNEXPECTED_TIMEOUT: + case SD_ERROR_4BIT_UNEXPECTED_TIMEOUT: + return -EILSEQ; + case 33: + return -EILSEQ; + case SD_ERROR_ILLEGAL_COMMAND: + return -EINVAL; + case SD_ERROR_NO_DEVICE: + return -ENOMEDIUM; + default: + return -ENODEV; + } +} + +static void command_res_completed(struct urb *urb) +{ /* urb completion handler - hardirq */ + struct vub300_mmc_host *vub300 = (struct vub300_mmc_host *)urb->context; + if (urb->status) { + /* we have to let the initiator handle the error */ + } else if (vub300->command_res_urb->actual_length == 0) { + /* + * we have seen this happen once or twice and + * we suspect a buggy USB host controller + */ + } else if (!vub300->data) { + /* this means that the command (typically CMD52) succeeded */ + } else if (vub300->resp.common.header_type != 0x02) { + /* + * this is an error response from the VUB300 chip + * and we let the initiator handle it + */ + } else if (vub300->urb) { + vub300->cmd->error = + vub300_response_error(vub300->resp.error.error_code); + usb_unlink_urb(vub300->urb); + } else { + vub300->cmd->error = + vub300_response_error(vub300->resp.error.error_code); + usb_sg_cancel(&vub300->sg_request); + } + complete(&vub300->command_complete); /* got_response_in */ +} + +static void command_out_completed(struct urb *urb) +{ /* urb completion handler - hardirq */ + struct vub300_mmc_host *vub300 = (struct vub300_mmc_host *)urb->context; + if (urb->status) { + complete(&vub300->command_complete); + } else { + int ret; + unsigned int pipe = + usb_rcvbulkpipe(vub300->udev, vub300->cmnd_res_ep); + usb_fill_bulk_urb(vub300->command_res_urb, vub300->udev, pipe, + &vub300->resp, sizeof(vub300->resp), + command_res_completed, vub300); + vub300->command_res_urb->actual_length = 0; + ret = usb_submit_urb(vub300->command_res_urb, GFP_ATOMIC); + if (ret == 0) { + /* + * the urb completion handler will call + * our completion handler + */ + } else { + /* + * and thus we only call it directly + * when it will not be called + */ + complete(&vub300->command_complete); + } + } +} + +/* + * the STUFF bits are masked out for the comparisons + */ +static void snoop_block_size_and_bus_width(struct vub300_mmc_host *vub300, + u32 cmd_arg) +{ + if ((0xFBFFFE00 & cmd_arg) == 0x80022200) + vub300->fbs[1] = (cmd_arg << 8) | (0x00FF & vub300->fbs[1]); + else if ((0xFBFFFE00 & cmd_arg) == 0x80022000) + vub300->fbs[1] = (0xFF & cmd_arg) | (0xFF00 & vub300->fbs[1]); + else if ((0xFBFFFE00 & cmd_arg) == 0x80042200) + vub300->fbs[2] = (cmd_arg << 8) | (0x00FF & vub300->fbs[2]); + else if ((0xFBFFFE00 & cmd_arg) == 0x80042000) + vub300->fbs[2] = (0xFF & cmd_arg) | (0xFF00 & vub300->fbs[2]); + else if ((0xFBFFFE00 & cmd_arg) == 0x80062200) + vub300->fbs[3] = (cmd_arg << 8) | (0x00FF & vub300->fbs[3]); + else if ((0xFBFFFE00 & cmd_arg) == 0x80062000) + vub300->fbs[3] = (0xFF & cmd_arg) | (0xFF00 & vub300->fbs[3]); + else if ((0xFBFFFE00 & cmd_arg) == 0x80082200) + vub300->fbs[4] = (cmd_arg << 8) | (0x00FF & vub300->fbs[4]); + else if ((0xFBFFFE00 & cmd_arg) == 0x80082000) + vub300->fbs[4] = (0xFF & cmd_arg) | (0xFF00 & vub300->fbs[4]); + else if ((0xFBFFFE00 & cmd_arg) == 0x800A2200) + vub300->fbs[5] = (cmd_arg << 8) | (0x00FF & vub300->fbs[5]); + else if ((0xFBFFFE00 & cmd_arg) == 0x800A2000) + vub300->fbs[5] = (0xFF & cmd_arg) | (0xFF00 & vub300->fbs[5]); + else if ((0xFBFFFE00 & cmd_arg) == 0x800C2200) + vub300->fbs[6] = (cmd_arg << 8) | (0x00FF & vub300->fbs[6]); + else if ((0xFBFFFE00 & cmd_arg) == 0x800C2000) + vub300->fbs[6] = (0xFF & cmd_arg) | (0xFF00 & vub300->fbs[6]); + else if ((0xFBFFFE00 & cmd_arg) == 0x800E2200) + vub300->fbs[7] = (cmd_arg << 8) | (0x00FF & vub300->fbs[7]); + else if ((0xFBFFFE00 & cmd_arg) == 0x800E2000) + vub300->fbs[7] = (0xFF & cmd_arg) | (0xFF00 & vub300->fbs[7]); + else if ((0xFBFFFE03 & cmd_arg) == 0x80000E00) + vub300->bus_width = 1; + else if ((0xFBFFFE03 & cmd_arg) == 0x80000E02) + vub300->bus_width = 4; +} + +static void send_command(struct vub300_mmc_host *vub300) +{ + /* cmd_mutex is held by vub300_cmndwork_thread */ + struct mmc_command *cmd = vub300->cmd; + struct mmc_data *data = vub300->data; + int retval; + int i; + u8 response_type; + if (vub300->app_spec) { + switch (cmd->opcode) { + case 6: + response_type = SDRT_1; + vub300->resp_len = 6; + if (0x00000000 == (0x00000003 & cmd->arg)) + vub300->bus_width = 1; + else if (0x00000002 == (0x00000003 & cmd->arg)) + vub300->bus_width = 4; + else + dev_err(&vub300->udev->dev, + "unexpected ACMD6 bus_width=%d\n", + 0x00000003 & cmd->arg); + break; + case 13: + response_type = SDRT_1; + vub300->resp_len = 6; + break; + case 22: + response_type = SDRT_1; + vub300->resp_len = 6; + break; + case 23: + response_type = SDRT_1; + vub300->resp_len = 6; + break; + case 41: + response_type = SDRT_3; + vub300->resp_len = 6; + break; + case 42: + response_type = SDRT_1; + vub300->resp_len = 6; + break; + case 51: + response_type = SDRT_1; + vub300->resp_len = 6; + break; + case 55: + response_type = SDRT_1; + vub300->resp_len = 6; + break; + default: + vub300->resp_len = 0; + cmd->error = -EINVAL; + complete(&vub300->command_complete); + return; + } + vub300->app_spec = 0; + } else { + switch (cmd->opcode) { + case 0: + response_type = SDRT_NONE; + vub300->resp_len = 0; + break; + case 1: + response_type = SDRT_3; + vub300->resp_len = 6; + break; + case 2: + response_type = SDRT_2; + vub300->resp_len = 17; + break; + case 3: + response_type = SDRT_6; + vub300->resp_len = 6; + break; + case 4: + response_type = SDRT_NONE; + vub300->resp_len = 0; + break; + case 5: + response_type = SDRT_4; + vub300->resp_len = 6; + break; + case 6: + response_type = SDRT_1; + vub300->resp_len = 6; + break; + case 7: + response_type = SDRT_1B; + vub300->resp_len = 6; + break; + case 8: + response_type = SDRT_7; + vub300->resp_len = 6; + break; + case 9: + response_type = SDRT_2; + vub300->resp_len = 17; + break; + case 10: + response_type = SDRT_2; + vub300->resp_len = 17; + break; + case 12: + response_type = SDRT_1B; + vub300->resp_len = 6; + break; + case 13: + response_type = SDRT_1; + vub300->resp_len = 6; + break; + case 15: + response_type = SDRT_NONE; + vub300->resp_len = 0; + break; + case 16: + for (i = 0; i < ARRAY_SIZE(vub300->fbs); i++) + vub300->fbs[i] = 0xFFFF & cmd->arg; + response_type = SDRT_1; + vub300->resp_len = 6; + break; + case 17: + case 18: + case 24: + case 25: + case 27: + response_type = SDRT_1; + vub300->resp_len = 6; + break; + case 28: + case 29: + response_type = SDRT_1B; + vub300->resp_len = 6; + break; + case 30: + case 32: + case 33: + response_type = SDRT_1; + vub300->resp_len = 6; + break; + case 38: + response_type = SDRT_1B; + vub300->resp_len = 6; + break; + case 42: + response_type = SDRT_1; + vub300->resp_len = 6; + break; + case 52: + response_type = SDRT_5; + vub300->resp_len = 6; + snoop_block_size_and_bus_width(vub300, cmd->arg); + break; + case 53: + response_type = SDRT_5; + vub300->resp_len = 6; + break; + case 55: + response_type = SDRT_1; + vub300->resp_len = 6; + vub300->app_spec = 1; + break; + case 56: + response_type = SDRT_1; + vub300->resp_len = 6; + break; + default: + vub300->resp_len = 0; + cmd->error = -EINVAL; + complete(&vub300->command_complete); + return; + } + } + /* + * it is a shame that we can not use "sizeof(struct sd_command_header)" + * this is because the packet _must_ be padded to 64 bytes + */ + vub300->cmnd.head.header_size = 20; + vub300->cmnd.head.header_type = 0x00; + vub300->cmnd.head.port_number = 0; /* "0" means port 1 */ + vub300->cmnd.head.command_type = 0x00; /* standard read command */ + vub300->cmnd.head.response_type = response_type; + vub300->cmnd.head.command_index = cmd->opcode; + vub300->cmnd.head.arguments[0] = cmd->arg >> 24; + vub300->cmnd.head.arguments[1] = cmd->arg >> 16; + vub300->cmnd.head.arguments[2] = cmd->arg >> 8; + vub300->cmnd.head.arguments[3] = cmd->arg >> 0; + if (cmd->opcode == 52) { + int fn = 0x7 & (cmd->arg >> 28); + vub300->cmnd.head.block_count[0] = 0; + vub300->cmnd.head.block_count[1] = 0; + vub300->cmnd.head.block_size[0] = (vub300->fbs[fn] >> 8) & 0xFF; + vub300->cmnd.head.block_size[1] = (vub300->fbs[fn] >> 0) & 0xFF; + vub300->cmnd.head.command_type = 0x00; + vub300->cmnd.head.transfer_size[0] = 0; + vub300->cmnd.head.transfer_size[1] = 0; + vub300->cmnd.head.transfer_size[2] = 0; + vub300->cmnd.head.transfer_size[3] = 0; + } else if (!data) { + vub300->cmnd.head.block_count[0] = 0; + vub300->cmnd.head.block_count[1] = 0; + vub300->cmnd.head.block_size[0] = (vub300->fbs[0] >> 8) & 0xFF; + vub300->cmnd.head.block_size[1] = (vub300->fbs[0] >> 0) & 0xFF; + vub300->cmnd.head.command_type = 0x00; + vub300->cmnd.head.transfer_size[0] = 0; + vub300->cmnd.head.transfer_size[1] = 0; + vub300->cmnd.head.transfer_size[2] = 0; + vub300->cmnd.head.transfer_size[3] = 0; + } else if (cmd->opcode == 53) { + int fn = 0x7 & (cmd->arg >> 28); + if (0x08 & vub300->cmnd.head.arguments[0]) { /* BLOCK MODE */ + vub300->cmnd.head.block_count[0] = + (data->blocks >> 8) & 0xFF; + vub300->cmnd.head.block_count[1] = + (data->blocks >> 0) & 0xFF; + vub300->cmnd.head.block_size[0] = + (data->blksz >> 8) & 0xFF; + vub300->cmnd.head.block_size[1] = + (data->blksz >> 0) & 0xFF; + } else { /* BYTE MODE */ + vub300->cmnd.head.block_count[0] = 0; + vub300->cmnd.head.block_count[1] = 0; + vub300->cmnd.head.block_size[0] = + (vub300->datasize >> 8) & 0xFF; + vub300->cmnd.head.block_size[1] = + (vub300->datasize >> 0) & 0xFF; + } + vub300->cmnd.head.command_type = + (MMC_DATA_READ & data->flags) ? 0x00 : 0x80; + vub300->cmnd.head.transfer_size[0] = + (vub300->datasize >> 24) & 0xFF; + vub300->cmnd.head.transfer_size[1] = + (vub300->datasize >> 16) & 0xFF; + vub300->cmnd.head.transfer_size[2] = + (vub300->datasize >> 8) & 0xFF; + vub300->cmnd.head.transfer_size[3] = + (vub300->datasize >> 0) & 0xFF; + if (vub300->datasize < vub300->fbs[fn]) { + vub300->cmnd.head.block_count[0] = 0; + vub300->cmnd.head.block_count[1] = 0; + } + } else { + vub300->cmnd.head.block_count[0] = (data->blocks >> 8) & 0xFF; + vub300->cmnd.head.block_count[1] = (data->blocks >> 0) & 0xFF; + vub300->cmnd.head.block_size[0] = (data->blksz >> 8) & 0xFF; + vub300->cmnd.head.block_size[1] = (data->blksz >> 0) & 0xFF; + vub300->cmnd.head.command_type = + (MMC_DATA_READ & data->flags) ? 0x00 : 0x80; + vub300->cmnd.head.transfer_size[0] = + (vub300->datasize >> 24) & 0xFF; + vub300->cmnd.head.transfer_size[1] = + (vub300->datasize >> 16) & 0xFF; + vub300->cmnd.head.transfer_size[2] = + (vub300->datasize >> 8) & 0xFF; + vub300->cmnd.head.transfer_size[3] = + (vub300->datasize >> 0) & 0xFF; + if (vub300->datasize < vub300->fbs[0]) { + vub300->cmnd.head.block_count[0] = 0; + vub300->cmnd.head.block_count[1] = 0; + } + } + if (vub300->cmnd.head.block_size[0] || vub300->cmnd.head.block_size[1]) { + u16 block_size = vub300->cmnd.head.block_size[1] | + (vub300->cmnd.head.block_size[0] << 8); + u16 block_boundary = FIRMWARE_BLOCK_BOUNDARY - + (FIRMWARE_BLOCK_BOUNDARY % block_size); + vub300->cmnd.head.block_boundary[0] = + (block_boundary >> 8) & 0xFF; + vub300->cmnd.head.block_boundary[1] = + (block_boundary >> 0) & 0xFF; + } else { + vub300->cmnd.head.block_boundary[0] = 0; + vub300->cmnd.head.block_boundary[1] = 0; + } + usb_fill_bulk_urb(vub300->command_out_urb, vub300->udev, + usb_sndbulkpipe(vub300->udev, vub300->cmnd_out_ep), + &vub300->cmnd, sizeof(vub300->cmnd), + command_out_completed, vub300); + retval = usb_submit_urb(vub300->command_out_urb, GFP_KERNEL); + if (retval < 0) { + cmd->error = retval; + complete(&vub300->command_complete); + return; + } else { + return; + } +} + +/* + * timer callback runs in atomic mode + * so it cannot call usb_kill_urb() + */ +static void vub300_sg_timed_out(unsigned long data) +{ + struct vub300_mmc_host *vub300 = (struct vub300_mmc_host *)data; + vub300->usb_timed_out = 1; + usb_sg_cancel(&vub300->sg_request); + usb_unlink_urb(vub300->command_out_urb); + usb_unlink_urb(vub300->command_res_urb); +} + +static u16 roundup_to_multiple_of_64(u16 number) +{ + return 0xFFC0 & (0x3F + number); +} + +/* + * this is a separate function to solve the 80 column width restriction + */ +static void __download_offload_pseudocode(struct vub300_mmc_host *vub300, + const struct firmware *fw) +{ + u8 register_count = 0; + u16 ts = 0; + u16 interrupt_size = 0; + const u8 *data = fw->data; + int size = fw->size; + u8 c; + dev_info(&vub300->udev->dev, "using %s for SDIO offload processing\n", + vub300->vub_name); + do { + c = *data++; + } while (size-- && c); /* skip comment */ + dev_info(&vub300->udev->dev, "using offload firmware %s %s\n", fw->data, + vub300->vub_name); + if (size < 4) { + dev_err(&vub300->udev->dev, + "corrupt offload pseudocode in firmware %s\n", + vub300->vub_name); + strncpy(vub300->vub_name, "corrupt offload pseudocode", + sizeof(vub300->vub_name)); + return; + } + interrupt_size += *data++; + size -= 1; + interrupt_size <<= 8; + interrupt_size += *data++; + size -= 1; + if (interrupt_size < size) { + u16 xfer_length = roundup_to_multiple_of_64(interrupt_size); + u8 *xfer_buffer = kmalloc(xfer_length, GFP_KERNEL); + if (xfer_buffer) { + int retval; + memcpy(xfer_buffer, data, interrupt_size); + memset(xfer_buffer + interrupt_size, 0, + xfer_length - interrupt_size); + size -= interrupt_size; + data += interrupt_size; + retval = + usb_control_msg(vub300->udev, + usb_sndctrlpipe(vub300->udev, 0), + SET_INTERRUPT_PSEUDOCODE, + USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_DEVICE, 0x0000, 0x0000, + xfer_buffer, xfer_length, HZ); + kfree(xfer_buffer); + if (retval < 0) { + strncpy(vub300->vub_name, + "SDIO pseudocode download failed", + sizeof(vub300->vub_name)); + return; + } + } else { + dev_err(&vub300->udev->dev, + "not enough memory for xfer buffer to send" + " INTERRUPT_PSEUDOCODE for %s %s\n", fw->data, + vub300->vub_name); + strncpy(vub300->vub_name, + "SDIO interrupt pseudocode download failed", + sizeof(vub300->vub_name)); + return; + } + } else { + dev_err(&vub300->udev->dev, + "corrupt interrupt pseudocode in firmware %s %s\n", + fw->data, vub300->vub_name); + strncpy(vub300->vub_name, "corrupt interrupt pseudocode", + sizeof(vub300->vub_name)); + return; + } + ts += *data++; + size -= 1; + ts <<= 8; + ts += *data++; + size -= 1; + if (ts < size) { + u16 xfer_length = roundup_to_multiple_of_64(ts); + u8 *xfer_buffer = kmalloc(xfer_length, GFP_KERNEL); + if (xfer_buffer) { + int retval; + memcpy(xfer_buffer, data, ts); + memset(xfer_buffer + ts, 0, + xfer_length - ts); + size -= ts; + data += ts; + retval = + usb_control_msg(vub300->udev, + usb_sndctrlpipe(vub300->udev, 0), + SET_TRANSFER_PSEUDOCODE, + USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_DEVICE, 0x0000, 0x0000, + xfer_buffer, xfer_length, HZ); + kfree(xfer_buffer); + if (retval < 0) { + strncpy(vub300->vub_name, + "SDIO pseudocode download failed", + sizeof(vub300->vub_name)); + return; + } + } else { + dev_err(&vub300->udev->dev, + "not enough memory for xfer buffer to send" + " TRANSFER_PSEUDOCODE for %s %s\n", fw->data, + vub300->vub_name); + strncpy(vub300->vub_name, + "SDIO transfer pseudocode download failed", + sizeof(vub300->vub_name)); + return; + } + } else { + dev_err(&vub300->udev->dev, + "corrupt transfer pseudocode in firmware %s %s\n", + fw->data, vub300->vub_name); + strncpy(vub300->vub_name, "corrupt transfer pseudocode", + sizeof(vub300->vub_name)); + return; + } + register_count += *data++; + size -= 1; + if (register_count * 4 == size) { + int I = vub300->dynamic_register_count = register_count; + int i = 0; + while (I--) { + unsigned int func_num = 0; + vub300->sdio_register[i].func_num = *data++; + size -= 1; + func_num += *data++; + size -= 1; + func_num <<= 8; + func_num += *data++; + size -= 1; + func_num <<= 8; + func_num += *data++; + size -= 1; + vub300->sdio_register[i].sdio_reg = func_num; + vub300->sdio_register[i].activate = 1; + vub300->sdio_register[i].prepared = 0; + i += 1; + } + dev_info(&vub300->udev->dev, + "initialized %d dynamic pseudocode registers\n", + vub300->dynamic_register_count); + return; + } else { + dev_err(&vub300->udev->dev, + "corrupt dynamic registers in firmware %s\n", + vub300->vub_name); + strncpy(vub300->vub_name, "corrupt dynamic registers", + sizeof(vub300->vub_name)); + return; + } +} + +/* + * if the binary containing the EMPTY PseudoCode can not be found + * vub300->vub_name is set anyway in order to prevent an automatic retry + */ +static void download_offload_pseudocode(struct vub300_mmc_host *vub300) +{ + struct mmc_card *card = vub300->mmc->card; + int sdio_funcs = card->sdio_funcs; + const struct firmware *fw = NULL; + int l = snprintf(vub300->vub_name, sizeof(vub300->vub_name), + "vub_%04X%04X", card->cis.vendor, card->cis.device); + int n = 0; + int retval; + for (n = 0; n < sdio_funcs; n++) { + struct sdio_func *sf = card->sdio_func[n]; + l += snprintf(vub300->vub_name + l, + sizeof(vub300->vub_name) - l, "_%04X%04X", + sf->vendor, sf->device); + }; + snprintf(vub300->vub_name + l, sizeof(vub300->vub_name) - l, ".bin"); + dev_info(&vub300->udev->dev, "requesting offload firmware %s\n", + vub300->vub_name); + retval = request_firmware(&fw, vub300->vub_name, &card->dev); + if (retval < 0) { + strncpy(vub300->vub_name, "vub_default.bin", + sizeof(vub300->vub_name)); + retval = request_firmware(&fw, vub300->vub_name, &card->dev); + if (retval < 0) { + strncpy(vub300->vub_name, + "no SDIO offload firmware found", + sizeof(vub300->vub_name)); + } else { + __download_offload_pseudocode(vub300, fw); + release_firmware(fw); + } + } else { + __download_offload_pseudocode(vub300, fw); + release_firmware(fw); + } +} + +static void vub300_usb_bulk_msg_completion(struct urb *urb) +{ /* urb completion handler - hardirq */ + complete((struct completion *)urb->context); +} + +static int vub300_usb_bulk_msg(struct vub300_mmc_host *vub300, + unsigned int pipe, void *data, int len, + int *actual_length, int timeout_msecs) +{ + /* cmd_mutex is held by vub300_cmndwork_thread */ + struct usb_device *usb_dev = vub300->udev; + struct completion done; + int retval; + vub300->urb = usb_alloc_urb(0, GFP_KERNEL); + if (!vub300->urb) + return -ENOMEM; + usb_fill_bulk_urb(vub300->urb, usb_dev, pipe, data, len, + vub300_usb_bulk_msg_completion, NULL); + init_completion(&done); + vub300->urb->context = &done; + vub300->urb->actual_length = 0; + retval = usb_submit_urb(vub300->urb, GFP_KERNEL); + if (unlikely(retval)) + goto out; + if (!wait_for_completion_timeout + (&done, msecs_to_jiffies(timeout_msecs))) { + retval = -ETIMEDOUT; + usb_kill_urb(vub300->urb); + } else { + retval = vub300->urb->status; + } +out: + *actual_length = vub300->urb->actual_length; + usb_free_urb(vub300->urb); + vub300->urb = NULL; + return retval; +} + +static int __command_read_data(struct vub300_mmc_host *vub300, + struct mmc_command *cmd, struct mmc_data *data) +{ + /* cmd_mutex is held by vub300_cmndwork_thread */ + int linear_length = vub300->datasize; + int padded_length = vub300->large_usb_packets ? + ((511 + linear_length) >> 9) << 9 : + ((63 + linear_length) >> 6) << 6; + if ((padded_length == linear_length) || !pad_input_to_usb_pkt) { + int result; + unsigned pipe; + pipe = usb_rcvbulkpipe(vub300->udev, vub300->data_inp_ep); + result = usb_sg_init(&vub300->sg_request, vub300->udev, + pipe, 0, data->sg, + data->sg_len, 0, GFP_KERNEL); + if (result < 0) { + usb_unlink_urb(vub300->command_out_urb); + usb_unlink_urb(vub300->command_res_urb); + cmd->error = result; + data->bytes_xfered = 0; + return 0; + } else { + vub300->sg_transfer_timer.expires = + jiffies + msecs_to_jiffies(2000 + + (linear_length / 16384)); + add_timer(&vub300->sg_transfer_timer); + usb_sg_wait(&vub300->sg_request); + del_timer(&vub300->sg_transfer_timer); + if (vub300->sg_request.status < 0) { + cmd->error = vub300->sg_request.status; + data->bytes_xfered = 0; + return 0; + } else { + data->bytes_xfered = vub300->datasize; + return linear_length; + } + } + } else { + u8 *buf = kmalloc(padded_length, GFP_KERNEL); + if (buf) { + int result; + unsigned pipe = usb_rcvbulkpipe(vub300->udev, + vub300->data_inp_ep); + int actual_length = 0; + result = vub300_usb_bulk_msg(vub300, pipe, buf, + padded_length, &actual_length, + 2000 + (padded_length / 16384)); + if (result < 0) { + cmd->error = result; + data->bytes_xfered = 0; + kfree(buf); + return 0; + } else if (actual_length < linear_length) { + cmd->error = -EREMOTEIO; + data->bytes_xfered = 0; + kfree(buf); + return 0; + } else { + sg_copy_from_buffer(data->sg, data->sg_len, buf, + linear_length); + kfree(buf); + data->bytes_xfered = vub300->datasize; + return linear_length; + } + } else { + cmd->error = -ENOMEM; + data->bytes_xfered = 0; + return 0; + } + } +} + +static int __command_write_data(struct vub300_mmc_host *vub300, + struct mmc_command *cmd, struct mmc_data *data) +{ + /* cmd_mutex is held by vub300_cmndwork_thread */ + unsigned pipe = usb_sndbulkpipe(vub300->udev, vub300->data_out_ep); + int linear_length = vub300->datasize; + int modulo_64_length = linear_length & 0x003F; + int modulo_512_length = linear_length & 0x01FF; + if (linear_length < 64) { + int result; + int actual_length; + sg_copy_to_buffer(data->sg, data->sg_len, + vub300->padded_buffer, + sizeof(vub300->padded_buffer)); + memset(vub300->padded_buffer + linear_length, 0, + sizeof(vub300->padded_buffer) - linear_length); + result = vub300_usb_bulk_msg(vub300, pipe, vub300->padded_buffer, + sizeof(vub300->padded_buffer), + &actual_length, 2000 + + (sizeof(vub300->padded_buffer) / + 16384)); + if (result < 0) { + cmd->error = result; + data->bytes_xfered = 0; + } else { + data->bytes_xfered = vub300->datasize; + } + } else if ((!vub300->large_usb_packets && (0 < modulo_64_length)) || + (vub300->large_usb_packets && (64 > modulo_512_length)) + ) { /* don't you just love these work-rounds */ + int padded_length = ((63 + linear_length) >> 6) << 6; + u8 *buf = kmalloc(padded_length, GFP_KERNEL); + if (buf) { + int result; + int actual_length; + sg_copy_to_buffer(data->sg, data->sg_len, buf, + padded_length); + memset(buf + linear_length, 0, + padded_length - linear_length); + result = + vub300_usb_bulk_msg(vub300, pipe, buf, + padded_length, &actual_length, + 2000 + padded_length / 16384); + kfree(buf); + if (result < 0) { + cmd->error = result; + data->bytes_xfered = 0; + } else { + data->bytes_xfered = vub300->datasize; + } + } else { + cmd->error = -ENOMEM; + data->bytes_xfered = 0; + } + } else { /* no data padding required */ + int result; + unsigned char buf[64 * 4]; + sg_copy_to_buffer(data->sg, data->sg_len, buf, sizeof(buf)); + result = usb_sg_init(&vub300->sg_request, vub300->udev, + pipe, 0, data->sg, + data->sg_len, 0, GFP_KERNEL); + if (result < 0) { + usb_unlink_urb(vub300->command_out_urb); + usb_unlink_urb(vub300->command_res_urb); + cmd->error = result; + data->bytes_xfered = 0; + } else { + vub300->sg_transfer_timer.expires = + jiffies + msecs_to_jiffies(2000 + + linear_length / 16384); + add_timer(&vub300->sg_transfer_timer); + usb_sg_wait(&vub300->sg_request); + if (cmd->error) { + data->bytes_xfered = 0; + } else { + del_timer(&vub300->sg_transfer_timer); + if (vub300->sg_request.status < 0) { + cmd->error = vub300->sg_request.status; + data->bytes_xfered = 0; + } else { + data->bytes_xfered = vub300->datasize; + } + } + } + } + return linear_length; +} + +static void __vub300_command_response(struct vub300_mmc_host *vub300, + struct mmc_command *cmd, + struct mmc_data *data, int data_length) +{ + /* cmd_mutex is held by vub300_cmndwork_thread */ + long respretval; + int msec_timeout = 1000 + data_length / 4; + respretval = + wait_for_completion_timeout(&vub300->command_complete, + msecs_to_jiffies(msec_timeout)); + if (respretval == 0) { /* TIMED OUT */ + /* we don't know which of "out" and "res" if any failed */ + int result; + vub300->usb_timed_out = 1; + usb_kill_urb(vub300->command_out_urb); + usb_kill_urb(vub300->command_res_urb); + cmd->error = -ETIMEDOUT; + result = usb_lock_device_for_reset(vub300->udev, + vub300->interface); + if (result == 0) { + result = usb_reset_device(vub300->udev); + usb_unlock_device(vub300->udev); + } + } else if (respretval < 0) { + /* we don't know which of "out" and "res" if any failed */ + usb_kill_urb(vub300->command_out_urb); + usb_kill_urb(vub300->command_res_urb); + cmd->error = respretval; + } else if (cmd->error) { + /* + * the error occurred sending the command + * or receiving the response + */ + } else if (vub300->command_out_urb->status) { + vub300->usb_transport_fail = vub300->command_out_urb->status; + cmd->error = -EPROTO == vub300->command_out_urb->status ? + -ESHUTDOWN : vub300->command_out_urb->status; + } else if (vub300->command_res_urb->status) { + vub300->usb_transport_fail = vub300->command_res_urb->status; + cmd->error = -EPROTO == vub300->command_res_urb->status ? + -ESHUTDOWN : vub300->command_res_urb->status; + } else if (vub300->resp.common.header_type == 0x00) { + /* + * the command completed successfully + * and there was no piggybacked data + */ + } else if (vub300->resp.common.header_type == RESPONSE_ERROR) { + cmd->error = + vub300_response_error(vub300->resp.error.error_code); + if (vub300->data) + usb_sg_cancel(&vub300->sg_request); + } else if (vub300->resp.common.header_type == RESPONSE_PIGGYBACKED) { + int offloaded_data_length = + vub300->resp.common.header_size - + sizeof(struct sd_register_header); + int register_count = offloaded_data_length >> 3; + int ri = 0; + while (register_count--) { + add_offloaded_reg(vub300, &vub300->resp.pig.reg[ri]); + ri += 1; + } + vub300->resp.common.header_size = + sizeof(struct sd_register_header); + vub300->resp.common.header_type = 0x00; + cmd->error = 0; + } else if (vub300->resp.common.header_type == RESPONSE_PIG_DISABLED) { + int offloaded_data_length = + vub300->resp.common.header_size - + sizeof(struct sd_register_header); + int register_count = offloaded_data_length >> 3; + int ri = 0; + while (register_count--) { + add_offloaded_reg(vub300, &vub300->resp.pig.reg[ri]); + ri += 1; + } + mutex_lock(&vub300->irq_mutex); + if (vub300->irqs_queued) { + vub300->irqs_queued += 1; + } else if (vub300->irq_enabled) { + vub300->irqs_queued += 1; + vub300_queue_poll_work(vub300, 0); + } else { + vub300->irqs_queued += 1; + } + vub300->irq_disabled = 1; + mutex_unlock(&vub300->irq_mutex); + vub300->resp.common.header_size = + sizeof(struct sd_register_header); + vub300->resp.common.header_type = 0x00; + cmd->error = 0; + } else if (vub300->resp.common.header_type == RESPONSE_PIG_ENABLED) { + int offloaded_data_length = + vub300->resp.common.header_size - + sizeof(struct sd_register_header); + int register_count = offloaded_data_length >> 3; + int ri = 0; + while (register_count--) { + add_offloaded_reg(vub300, &vub300->resp.pig.reg[ri]); + ri += 1; + } + mutex_lock(&vub300->irq_mutex); + if (vub300->irqs_queued) { + vub300->irqs_queued += 1; + } else if (vub300->irq_enabled) { + vub300->irqs_queued += 1; + vub300_queue_poll_work(vub300, 0); + } else { + vub300->irqs_queued += 1; + } + vub300->irq_disabled = 0; + mutex_unlock(&vub300->irq_mutex); + vub300->resp.common.header_size = + sizeof(struct sd_register_header); + vub300->resp.common.header_type = 0x00; + cmd->error = 0; + } else { + cmd->error = -EINVAL; + } +} + +static void construct_request_response(struct vub300_mmc_host *vub300, + struct mmc_command *cmd) +{ + int resp_len = vub300->resp_len; + int less_cmd = (17 == resp_len) ? resp_len : resp_len - 1; + int bytes = 3 & less_cmd; + int words = less_cmd >> 2; + u8 *r = vub300->resp.response.command_response; + if (bytes == 3) { + cmd->resp[words] = (r[1 + (words << 2)] << 24) + | (r[2 + (words << 2)] << 16) + | (r[3 + (words << 2)] << 8); + } else if (bytes == 2) { + cmd->resp[words] = (r[1 + (words << 2)] << 24) + | (r[2 + (words << 2)] << 16); + } else if (bytes == 1) { + cmd->resp[words] = (r[1 + (words << 2)] << 24); + } + while (words-- > 0) { + cmd->resp[words] = (r[1 + (words << 2)] << 24) + | (r[2 + (words << 2)] << 16) + | (r[3 + (words << 2)] << 8) + | (r[4 + (words << 2)] << 0); + } + if ((cmd->opcode == 53) && (0x000000FF & cmd->resp[0])) + cmd->resp[0] &= 0xFFFFFF00; +} + +/* this thread runs only when there is an upper level command req outstanding */ +static void vub300_cmndwork_thread(struct work_struct *work) +{ + struct vub300_mmc_host *vub300 = + container_of(work, struct vub300_mmc_host, cmndwork); + if (!vub300->interface) { + kref_put(&vub300->kref, vub300_delete); + return; + } else { + struct mmc_request *req = vub300->req; + struct mmc_command *cmd = vub300->cmd; + struct mmc_data *data = vub300->data; + int data_length; + mutex_lock(&vub300->cmd_mutex); + init_completion(&vub300->command_complete); + if (likely(vub300->vub_name[0]) || !vub300->mmc->card || + !mmc_card_present(vub300->mmc->card)) { + /* + * the name of the EMPTY Pseudo firmware file + * is used as a flag to indicate that the file + * has been already downloaded to the VUB300 chip + */ + } else if (0 == vub300->mmc->card->sdio_funcs) { + strncpy(vub300->vub_name, "SD memory device", + sizeof(vub300->vub_name)); + } else { + download_offload_pseudocode(vub300); + } + send_command(vub300); + if (!data) + data_length = 0; + else if (MMC_DATA_READ & data->flags) + data_length = __command_read_data(vub300, cmd, data); + else + data_length = __command_write_data(vub300, cmd, data); + __vub300_command_response(vub300, cmd, data, data_length); + vub300->req = NULL; + vub300->cmd = NULL; + vub300->data = NULL; + if (cmd->error) { + if (cmd->error == -ENOMEDIUM) + check_vub300_port_status(vub300); + mutex_unlock(&vub300->cmd_mutex); + mmc_request_done(vub300->mmc, req); + kref_put(&vub300->kref, vub300_delete); + return; + } else { + construct_request_response(vub300, cmd); + vub300->resp_len = 0; + mutex_unlock(&vub300->cmd_mutex); + kref_put(&vub300->kref, vub300_delete); + mmc_request_done(vub300->mmc, req); + return; + } + } +} + +static int examine_cyclic_buffer(struct vub300_mmc_host *vub300, + struct mmc_command *cmd, u8 Function) +{ + /* cmd_mutex is held by vub300_mmc_request */ + u8 cmd0 = 0xFF & (cmd->arg >> 24); + u8 cmd1 = 0xFF & (cmd->arg >> 16); + u8 cmd2 = 0xFF & (cmd->arg >> 8); + u8 cmd3 = 0xFF & (cmd->arg >> 0); + int first = MAXREGMASK & vub300->fn[Function].offload_point; + struct offload_registers_access *rf = &vub300->fn[Function].reg[first]; + if (cmd0 == rf->command_byte[0] && + cmd1 == rf->command_byte[1] && + cmd2 == rf->command_byte[2] && + cmd3 == rf->command_byte[3]) { + u8 checksum = 0x00; + cmd->resp[1] = checksum << 24; + cmd->resp[0] = (rf->Respond_Byte[0] << 24) + | (rf->Respond_Byte[1] << 16) + | (rf->Respond_Byte[2] << 8) + | (rf->Respond_Byte[3] << 0); + vub300->fn[Function].offload_point += 1; + vub300->fn[Function].offload_count -= 1; + vub300->total_offload_count -= 1; + return 1; + } else { + int delta = 1; /* because it does not match the first one */ + u8 register_count = vub300->fn[Function].offload_count - 1; + u32 register_point = vub300->fn[Function].offload_point + 1; + while (0 < register_count) { + int point = MAXREGMASK & register_point; + struct offload_registers_access *r = + &vub300->fn[Function].reg[point]; + if (cmd0 == r->command_byte[0] && + cmd1 == r->command_byte[1] && + cmd2 == r->command_byte[2] && + cmd3 == r->command_byte[3]) { + u8 checksum = 0x00; + cmd->resp[1] = checksum << 24; + cmd->resp[0] = (r->Respond_Byte[0] << 24) + | (r->Respond_Byte[1] << 16) + | (r->Respond_Byte[2] << 8) + | (r->Respond_Byte[3] << 0); + vub300->fn[Function].offload_point += delta; + vub300->fn[Function].offload_count -= delta; + vub300->total_offload_count -= delta; + return 1; + } else { + register_point += 1; + register_count -= 1; + delta += 1; + continue; + } + } + return 0; + } +} + +static int satisfy_request_from_offloaded_data(struct vub300_mmc_host *vub300, + struct mmc_command *cmd) +{ + /* cmd_mutex is held by vub300_mmc_request */ + u8 regs = vub300->dynamic_register_count; + u8 i = 0; + u8 func = FUN(cmd); + u32 reg = REG(cmd); + while (0 < regs--) { + if ((vub300->sdio_register[i].func_num == func) && + (vub300->sdio_register[i].sdio_reg == reg)) { + if (!vub300->sdio_register[i].prepared) { + return 0; + } else if ((0x80000000 & cmd->arg) == 0x80000000) { + /* + * a write to a dynamic register + * nullifies our offloaded value + */ + vub300->sdio_register[i].prepared = 0; + return 0; + } else { + u8 checksum = 0x00; + u8 rsp0 = 0x00; + u8 rsp1 = 0x00; + u8 rsp2 = vub300->sdio_register[i].response; + u8 rsp3 = vub300->sdio_register[i].regvalue; + vub300->sdio_register[i].prepared = 0; + cmd->resp[1] = checksum << 24; + cmd->resp[0] = (rsp0 << 24) + | (rsp1 << 16) + | (rsp2 << 8) + | (rsp3 << 0); + return 1; + } + } else { + i += 1; + continue; + } + }; + if (vub300->total_offload_count == 0) + return 0; + else if (vub300->fn[func].offload_count == 0) + return 0; + else + return examine_cyclic_buffer(vub300, cmd, func); +} + +static void vub300_mmc_request(struct mmc_host *mmc, struct mmc_request *req) +{ /* NOT irq */ + struct mmc_command *cmd = req->cmd; + struct vub300_mmc_host *vub300 = mmc_priv(mmc); + if (!vub300->interface) { + cmd->error = -ESHUTDOWN; + mmc_request_done(mmc, req); + return; + } else { + struct mmc_data *data = req->data; + if (!vub300->card_powered) { + cmd->error = -ENOMEDIUM; + mmc_request_done(mmc, req); + return; + } + if (!vub300->card_present) { + cmd->error = -ENOMEDIUM; + mmc_request_done(mmc, req); + return; + } + if (vub300->usb_transport_fail) { + cmd->error = vub300->usb_transport_fail; + mmc_request_done(mmc, req); + return; + } + if (!vub300->interface) { + cmd->error = -ENODEV; + mmc_request_done(mmc, req); + return; + } + kref_get(&vub300->kref); + mutex_lock(&vub300->cmd_mutex); + mod_timer(&vub300->inactivity_timer, jiffies + HZ); + /* + * for performance we have to return immediately + * if the requested data has been offloaded + */ + if (cmd->opcode == 52 && + satisfy_request_from_offloaded_data(vub300, cmd)) { + cmd->error = 0; + mutex_unlock(&vub300->cmd_mutex); + kref_put(&vub300->kref, vub300_delete); + mmc_request_done(mmc, req); + return; + } else { + vub300->cmd = cmd; + vub300->req = req; + vub300->data = data; + if (data) + vub300->datasize = data->blksz * data->blocks; + else + vub300->datasize = 0; + vub300_queue_cmnd_work(vub300); + mutex_unlock(&vub300->cmd_mutex); + kref_put(&vub300->kref, vub300_delete); + /* + * the kernel lock diagnostics complain + * if the cmd_mutex * is "passed on" + * to the cmndwork thread, + * so we must release it now + * and re-acquire it in the cmndwork thread + */ + } + } +} + +static void __set_clock_speed(struct vub300_mmc_host *vub300, u8 buf[8], + struct mmc_ios *ios) +{ + int buf_array_size = 8; /* ARRAY_SIZE(buf) does not work !!! */ + int retval; + u32 kHzClock; + if (ios->clock >= 48000000) + kHzClock = 48000; + else if (ios->clock >= 24000000) + kHzClock = 24000; + else if (ios->clock >= 20000000) + kHzClock = 20000; + else if (ios->clock >= 15000000) + kHzClock = 15000; + else if (ios->clock >= 200000) + kHzClock = 200; + else + kHzClock = 0; + { + int i; + u64 c = kHzClock; + for (i = 0; i < buf_array_size; i++) { + buf[i] = c; + c >>= 8; + } + } + retval = + usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0), + SET_CLOCK_SPEED, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0x00, 0x00, buf, buf_array_size, HZ); + if (retval != 8) { + dev_err(&vub300->udev->dev, "SET_CLOCK_SPEED" + " %dkHz failed with retval=%d\n", kHzClock, retval); + } else { + dev_dbg(&vub300->udev->dev, "SET_CLOCK_SPEED" + " %dkHz\n", kHzClock); + } +} + +static void vub300_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ /* NOT irq */ + struct vub300_mmc_host *vub300 = mmc_priv(mmc); + if (!vub300->interface) + return; + kref_get(&vub300->kref); + mutex_lock(&vub300->cmd_mutex); + if ((ios->power_mode == MMC_POWER_OFF) && vub300->card_powered) { + vub300->card_powered = 0; + usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0), + SET_SD_POWER, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0x0000, 0x0000, NULL, 0, HZ); + /* must wait for the VUB300 u-proc to boot up */ + msleep(600); + } else if ((ios->power_mode == MMC_POWER_UP) && !vub300->card_powered) { + usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0), + SET_SD_POWER, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0x0001, 0x0000, NULL, 0, HZ); + msleep(600); + vub300->card_powered = 1; + } else if (ios->power_mode == MMC_POWER_ON) { + u8 *buf = kmalloc(8, GFP_KERNEL); + if (buf) { + __set_clock_speed(vub300, buf, ios); + kfree(buf); + } + } else { + /* this should mean no change of state */ + } + mutex_unlock(&vub300->cmd_mutex); + kref_put(&vub300->kref, vub300_delete); +} + +static int vub300_mmc_get_ro(struct mmc_host *mmc) +{ + struct vub300_mmc_host *vub300 = mmc_priv(mmc); + return vub300->read_only; +} + +static void vub300_enable_sdio_irq(struct mmc_host *mmc, int enable) +{ /* NOT irq */ + struct vub300_mmc_host *vub300 = mmc_priv(mmc); + if (!vub300->interface) + return; + kref_get(&vub300->kref); + if (enable) { + mutex_lock(&vub300->irq_mutex); + if (vub300->irqs_queued) { + vub300->irqs_queued -= 1; + mmc_signal_sdio_irq(vub300->mmc); + } else if (vub300->irq_disabled) { + vub300->irq_disabled = 0; + vub300->irq_enabled = 1; + vub300_queue_poll_work(vub300, 0); + } else if (vub300->irq_enabled) { + /* this should not happen, so we will just ignore it */ + } else { + vub300->irq_enabled = 1; + vub300_queue_poll_work(vub300, 0); + } + mutex_unlock(&vub300->irq_mutex); + } else { + vub300->irq_enabled = 0; + } + kref_put(&vub300->kref, vub300_delete); +} + +static void vub300_init_card(struct mmc_host *mmc, struct mmc_card *card) +{ /* NOT irq */ + struct vub300_mmc_host *vub300 = mmc_priv(mmc); + dev_info(&vub300->udev->dev, "NO host QUIRKS for this card\n"); +} + +static struct mmc_host_ops vub300_mmc_ops = { + .request = vub300_mmc_request, + .set_ios = vub300_mmc_set_ios, + .get_ro = vub300_mmc_get_ro, + .enable_sdio_irq = vub300_enable_sdio_irq, + .init_card = vub300_init_card, +}; + +static int vub300_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ /* NOT irq */ + struct vub300_mmc_host *vub300; + struct usb_host_interface *iface_desc; + struct usb_device *udev = usb_get_dev(interface_to_usbdev(interface)); + int i; + int retval = -ENOMEM; + struct urb *command_out_urb; + struct urb *command_res_urb; + struct mmc_host *mmc; + char manufacturer[48]; + char product[32]; + char serial_number[32]; + usb_string(udev, udev->descriptor.iManufacturer, manufacturer, + sizeof(manufacturer)); + usb_string(udev, udev->descriptor.iProduct, product, sizeof(product)); + usb_string(udev, udev->descriptor.iSerialNumber, serial_number, + sizeof(serial_number)); + dev_info(&udev->dev, "probing VID:PID(%04X:%04X) %s %s %s\n", + udev->descriptor.idVendor, udev->descriptor.idProduct, + manufacturer, product, serial_number); + command_out_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!command_out_urb) { + retval = -ENOMEM; + dev_err(&udev->dev, "not enough memory for command_out_urb\n"); + goto error0; + } + command_res_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!command_res_urb) { + retval = -ENOMEM; + dev_err(&udev->dev, "not enough memory for command_res_urb\n"); + goto error1; + } + /* this also allocates memory for our VUB300 mmc host device */ + mmc = mmc_alloc_host(sizeof(struct vub300_mmc_host), &udev->dev); + if (!mmc) { + retval = -ENOMEM; + dev_err(&udev->dev, "not enough memory for the mmc_host\n"); + goto error4; + } + /* MMC core transfer sizes tunable parameters */ + mmc->caps = 0; + if (!force_1_bit_data_xfers) + mmc->caps |= MMC_CAP_4_BIT_DATA; + if (!force_polling_for_irqs) + mmc->caps |= MMC_CAP_SDIO_IRQ; + mmc->caps &= ~MMC_CAP_NEEDS_POLL; + /* + * MMC_CAP_NEEDS_POLL causes core.c:mmc_rescan() to poll + * for devices which results in spurious CMD7's being + * issued which stops some SDIO cards from working + */ + if (limit_speed_to_24_MHz) { + mmc->caps |= MMC_CAP_MMC_HIGHSPEED; + mmc->caps |= MMC_CAP_SD_HIGHSPEED; + mmc->f_max = 24000000; + dev_info(&udev->dev, "limiting SDIO speed to 24_MHz\n"); + } else { + mmc->caps |= MMC_CAP_MMC_HIGHSPEED; + mmc->caps |= MMC_CAP_SD_HIGHSPEED; + mmc->f_max = 48000000; + } + mmc->f_min = 200000; + mmc->max_blk_count = 511; + mmc->max_blk_size = 512; + mmc->max_segs = 128; + if (force_max_req_size) + mmc->max_req_size = force_max_req_size * 1024; + else + mmc->max_req_size = 64 * 1024; + mmc->max_seg_size = mmc->max_req_size; + mmc->ocr_avail = 0; + mmc->ocr_avail |= MMC_VDD_165_195; + mmc->ocr_avail |= MMC_VDD_20_21; + mmc->ocr_avail |= MMC_VDD_21_22; + mmc->ocr_avail |= MMC_VDD_22_23; + mmc->ocr_avail |= MMC_VDD_23_24; + mmc->ocr_avail |= MMC_VDD_24_25; + mmc->ocr_avail |= MMC_VDD_25_26; + mmc->ocr_avail |= MMC_VDD_26_27; + mmc->ocr_avail |= MMC_VDD_27_28; + mmc->ocr_avail |= MMC_VDD_28_29; + mmc->ocr_avail |= MMC_VDD_29_30; + mmc->ocr_avail |= MMC_VDD_30_31; + mmc->ocr_avail |= MMC_VDD_31_32; + mmc->ocr_avail |= MMC_VDD_32_33; + mmc->ocr_avail |= MMC_VDD_33_34; + mmc->ocr_avail |= MMC_VDD_34_35; + mmc->ocr_avail |= MMC_VDD_35_36; + mmc->ops = &vub300_mmc_ops; + vub300 = mmc_priv(mmc); + vub300->mmc = mmc; + vub300->card_powered = 0; + vub300->bus_width = 0; + vub300->cmnd.head.block_size[0] = 0x00; + vub300->cmnd.head.block_size[1] = 0x00; + vub300->app_spec = 0; + mutex_init(&vub300->cmd_mutex); + mutex_init(&vub300->irq_mutex); + vub300->command_out_urb = command_out_urb; + vub300->command_res_urb = command_res_urb; + vub300->usb_timed_out = 0; + vub300->dynamic_register_count = 0; + + for (i = 0; i < ARRAY_SIZE(vub300->fn); i++) { + vub300->fn[i].offload_point = 0; + vub300->fn[i].offload_count = 0; + } + + vub300->total_offload_count = 0; + vub300->irq_enabled = 0; + vub300->irq_disabled = 0; + vub300->irqs_queued = 0; + + for (i = 0; i < ARRAY_SIZE(vub300->sdio_register); i++) + vub300->sdio_register[i++].activate = 0; + + vub300->udev = udev; + vub300->interface = interface; + vub300->cmnd_res_ep = 0; + vub300->cmnd_out_ep = 0; + vub300->data_inp_ep = 0; + vub300->data_out_ep = 0; + + for (i = 0; i < ARRAY_SIZE(vub300->fbs); i++) + vub300->fbs[i] = 512; + + /* + * set up the endpoint information + * + * use the first pair of bulk-in and bulk-out + * endpoints for Command/Response+Interrupt + * + * use the second pair of bulk-in and bulk-out + * endpoints for Data In/Out + */ + vub300->large_usb_packets = 0; + iface_desc = interface->cur_altsetting; + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { + struct usb_endpoint_descriptor *endpoint = + &iface_desc->endpoint[i].desc; + dev_info(&vub300->udev->dev, + "vub300 testing %s EndPoint(%d) %02X\n", + usb_endpoint_is_bulk_in(endpoint) ? "BULK IN" : + usb_endpoint_is_bulk_out(endpoint) ? "BULK OUT" : + "UNKNOWN", i, endpoint->bEndpointAddress); + if (endpoint->wMaxPacketSize > 64) + vub300->large_usb_packets = 1; + if (usb_endpoint_is_bulk_in(endpoint)) { + if (!vub300->cmnd_res_ep) { + vub300->cmnd_res_ep = + endpoint->bEndpointAddress; + } else if (!vub300->data_inp_ep) { + vub300->data_inp_ep = + endpoint->bEndpointAddress; + } else { + dev_warn(&vub300->udev->dev, + "ignoring" + " unexpected bulk_in endpoint"); + } + } else if (usb_endpoint_is_bulk_out(endpoint)) { + if (!vub300->cmnd_out_ep) { + vub300->cmnd_out_ep = + endpoint->bEndpointAddress; + } else if (!vub300->data_out_ep) { + vub300->data_out_ep = + endpoint->bEndpointAddress; + } else { + dev_warn(&vub300->udev->dev, + "ignoring" + " unexpected bulk_out endpoint"); + } + } else { + dev_warn(&vub300->udev->dev, + "vub300 ignoring EndPoint(%d) %02X", i, + endpoint->bEndpointAddress); + } + } + if (vub300->cmnd_res_ep && vub300->cmnd_out_ep && + vub300->data_inp_ep && vub300->data_out_ep) { + dev_info(&vub300->udev->dev, + "vub300 %s packets" + " using EndPoints %02X %02X %02X %02X\n", + vub300->large_usb_packets ? "LARGE" : "SMALL", + vub300->cmnd_out_ep, vub300->cmnd_res_ep, + vub300->data_out_ep, vub300->data_inp_ep); + /* we have the expected EndPoints */ + } else { + dev_err(&vub300->udev->dev, + "Could not find two sets of bulk-in/out endpoint pairs\n"); + retval = -EINVAL; + goto error5; + } + retval = + usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0), + GET_HC_INF0, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0x0000, 0x0000, &vub300->hc_info, + sizeof(vub300->hc_info), HZ); + if (retval < 0) + goto error5; + retval = + usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0), + SET_ROM_WAIT_STATES, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + firmware_rom_wait_states, 0x0000, NULL, 0, HZ); + if (retval < 0) + goto error5; + dev_info(&vub300->udev->dev, + "operating_mode = %s %s %d MHz %s %d byte USB packets\n", + (mmc->caps & MMC_CAP_SDIO_IRQ) ? "IRQs" : "POLL", + (mmc->caps & MMC_CAP_4_BIT_DATA) ? "4-bit" : "1-bit", + mmc->f_max / 1000000, + pad_input_to_usb_pkt ? "padding input data to" : "with", + vub300->large_usb_packets ? 512 : 64); + retval = + usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0), + GET_SYSTEM_PORT_STATUS, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0x0000, 0x0000, &vub300->system_port_status, + sizeof(vub300->system_port_status), HZ); + if (retval < 0) { + goto error4; + } else if (sizeof(vub300->system_port_status) == retval) { + vub300->card_present = + (0x0001 & vub300->system_port_status.port_flags) ? 1 : 0; + vub300->read_only = + (0x0010 & vub300->system_port_status.port_flags) ? 1 : 0; + } else { + goto error4; + } + usb_set_intfdata(interface, vub300); + INIT_DELAYED_WORK(&vub300->pollwork, vub300_pollwork_thread); + INIT_WORK(&vub300->cmndwork, vub300_cmndwork_thread); + INIT_WORK(&vub300->deadwork, vub300_deadwork_thread); + kref_init(&vub300->kref); + init_timer(&vub300->sg_transfer_timer); + vub300->sg_transfer_timer.data = (unsigned long)vub300; + vub300->sg_transfer_timer.function = vub300_sg_timed_out; + kref_get(&vub300->kref); + init_timer(&vub300->inactivity_timer); + vub300->inactivity_timer.data = (unsigned long)vub300; + vub300->inactivity_timer.function = vub300_inactivity_timer_expired; + vub300->inactivity_timer.expires = jiffies + HZ; + add_timer(&vub300->inactivity_timer); + if (vub300->card_present) + dev_info(&vub300->udev->dev, + "USB vub300 remote SDIO host controller[%d]" + "connected with SD/SDIO card inserted\n", + interface_to_InterfaceNumber(interface)); + else + dev_info(&vub300->udev->dev, + "USB vub300 remote SDIO host controller[%d]" + "connected with no SD/SDIO card inserted\n", + interface_to_InterfaceNumber(interface)); + mmc_add_host(mmc); + return 0; +error5: + mmc_free_host(mmc); + /* + * and hence also frees vub300 + * which is contained at the end of struct mmc + */ +error4: + usb_free_urb(command_res_urb); +error1: + usb_free_urb(command_out_urb); +error0: + usb_put_dev(udev); + return retval; +} + +static void vub300_disconnect(struct usb_interface *interface) +{ /* NOT irq */ + struct vub300_mmc_host *vub300 = usb_get_intfdata(interface); + if (!vub300 || !vub300->mmc) { + return; + } else { + struct mmc_host *mmc = vub300->mmc; + if (!vub300->mmc) { + return; + } else { + int ifnum = interface_to_InterfaceNumber(interface); + usb_set_intfdata(interface, NULL); + /* prevent more I/O from starting */ + vub300->interface = NULL; + kref_put(&vub300->kref, vub300_delete); + mmc_remove_host(mmc); + pr_info("USB vub300 remote SDIO host controller[%d]" + " now disconnected", ifnum); + return; + } + } +} + +#ifdef CONFIG_PM +static int vub300_suspend(struct usb_interface *intf, pm_message_t message) +{ + return 0; +} + +static int vub300_resume(struct usb_interface *intf) +{ + return 0; +} +#else +#define vub300_suspend NULL +#define vub300_resume NULL +#endif +static int vub300_pre_reset(struct usb_interface *intf) +{ /* NOT irq */ + struct vub300_mmc_host *vub300 = usb_get_intfdata(intf); + mutex_lock(&vub300->cmd_mutex); + return 0; +} + +static int vub300_post_reset(struct usb_interface *intf) +{ /* NOT irq */ + struct vub300_mmc_host *vub300 = usb_get_intfdata(intf); + /* we are sure no URBs are active - no locking needed */ + vub300->errors = -EPIPE; + mutex_unlock(&vub300->cmd_mutex); + return 0; +} + +static struct usb_driver vub300_driver = { + .name = "vub300", + .probe = vub300_probe, + .disconnect = vub300_disconnect, + .suspend = vub300_suspend, + .resume = vub300_resume, + .pre_reset = vub300_pre_reset, + .post_reset = vub300_post_reset, + .id_table = vub300_table, + .supports_autosuspend = 1, +}; + +static int __init vub300_init(void) +{ /* NOT irq */ + int result; + + pr_info("VUB300 Driver rom wait states = %02X irqpoll timeout = %04X", + firmware_rom_wait_states, 0x0FFFF & firmware_irqpoll_timeout); + cmndworkqueue = create_singlethread_workqueue("kvub300c"); + if (!cmndworkqueue) { + pr_err("not enough memory for the REQUEST workqueue"); + result = -ENOMEM; + goto out1; + } + pollworkqueue = create_singlethread_workqueue("kvub300p"); + if (!pollworkqueue) { + pr_err("not enough memory for the IRQPOLL workqueue"); + result = -ENOMEM; + goto out2; + } + deadworkqueue = create_singlethread_workqueue("kvub300d"); + if (!deadworkqueue) { + pr_err("not enough memory for the EXPIRED workqueue"); + result = -ENOMEM; + goto out3; + } + result = usb_register(&vub300_driver); + if (result) { + pr_err("usb_register failed. Error number %d", result); + goto out4; + } + return 0; +out4: + destroy_workqueue(deadworkqueue); +out3: + destroy_workqueue(pollworkqueue); +out2: + destroy_workqueue(cmndworkqueue); +out1: + return result; +} + +static void __exit vub300_exit(void) +{ + usb_deregister(&vub300_driver); + flush_workqueue(cmndworkqueue); + flush_workqueue(pollworkqueue); + flush_workqueue(deadworkqueue); + destroy_workqueue(cmndworkqueue); + destroy_workqueue(pollworkqueue); + destroy_workqueue(deadworkqueue); +} + +module_init(vub300_init); +module_exit(vub300_exit); + +MODULE_AUTHOR("Tony Olech <tony.olech@elandigitalsystems.com>"); +MODULE_DESCRIPTION("VUB300 USB to SD/MMC/SDIO adapter driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c index 7fca0a386ba..1defd5ed323 100644 --- a/drivers/mmc/host/wbsd.c +++ b/drivers/mmc/host/wbsd.c @@ -194,7 +194,7 @@ static void wbsd_reset(struct wbsd_host *host) { u8 setup; - printk(KERN_ERR "%s: Resetting chip\n", mmc_hostname(host->mmc)); + pr_err("%s: Resetting chip\n", mmc_hostname(host->mmc)); /* * Soft reset of chip (SD/MMC part). @@ -484,7 +484,7 @@ static void wbsd_fill_fifo(struct wbsd_host *host) /* * Check that we aren't being called after the - * entire buffer has been transfered. + * entire buffer has been transferred. */ if (host->num_sg == 0) return; @@ -721,7 +721,7 @@ static void wbsd_finish_data(struct wbsd_host *host, struct mmc_data *data) * Any leftover data? */ if (count) { - printk(KERN_ERR "%s: Incomplete DMA transfer. " + pr_err("%s: Incomplete DMA transfer. " "%d bytes left.\n", mmc_hostname(host->mmc), count); @@ -803,7 +803,7 @@ static void wbsd_request(struct mmc_host *mmc, struct mmc_request *mrq) default: #ifdef CONFIG_MMC_DEBUG - printk(KERN_WARNING "%s: Data command %d is not " + pr_warning("%s: Data command %d is not " "supported by this controller.\n", mmc_hostname(host->mmc), cmd->opcode); #endif @@ -828,7 +828,7 @@ static void wbsd_request(struct mmc_host *mmc, struct mmc_request *mrq) /* * If this is a data transfer the request * will be finished after the data has - * transfered. + * transferred. */ if (cmd->data && !cmd->error) { /* @@ -904,7 +904,7 @@ static void wbsd_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) setup &= ~WBSD_DAT3_H; /* - * We cannot resume card detection immediatly + * We cannot resume card detection immediately * because of capacitance and delays in the chip. */ mod_timer(&host->ignore_timer, jiffies + HZ / 100); @@ -1029,7 +1029,7 @@ static void wbsd_tasklet_card(unsigned long param) host->flags &= ~WBSD_FCARD_PRESENT; if (host->mrq) { - printk(KERN_ERR "%s: Card removed during transfer!\n", + pr_err("%s: Card removed during transfer!\n", mmc_hostname(host->mmc)); wbsd_reset(host); @@ -1196,7 +1196,7 @@ static irqreturn_t wbsd_irq(int irq, void *dev_id) * Allocate/free MMC structure. */ -static int __devinit wbsd_alloc_mmc(struct device *dev) +static int wbsd_alloc_mmc(struct device *dev) { struct mmc_host *mmc; struct wbsd_host *host; @@ -1288,7 +1288,7 @@ static void wbsd_free_mmc(struct device *dev) * Scan for known chip id:s */ -static int __devinit wbsd_scan(struct wbsd_host *host) +static int wbsd_scan(struct wbsd_host *host) { int i, j, k; int id; @@ -1344,7 +1344,7 @@ static int __devinit wbsd_scan(struct wbsd_host *host) * Allocate/free io port ranges */ -static int __devinit wbsd_request_region(struct wbsd_host *host, int base) +static int wbsd_request_region(struct wbsd_host *host, int base) { if (base & 0x7) return -EINVAL; @@ -1374,7 +1374,7 @@ static void wbsd_release_regions(struct wbsd_host *host) * Allocate/free DMA port and buffer */ -static void __devinit wbsd_request_dma(struct wbsd_host *host, int dma) +static void wbsd_request_dma(struct wbsd_host *host, int dma) { if (dma < 0) return; @@ -1429,7 +1429,7 @@ free: free_dma(dma); err: - printk(KERN_WARNING DRIVER_NAME ": Unable to allocate DMA %d. " + pr_warning(DRIVER_NAME ": Unable to allocate DMA %d. " "Falling back on FIFO.\n", dma); } @@ -1452,7 +1452,7 @@ static void wbsd_release_dma(struct wbsd_host *host) * Allocate/free IRQ. */ -static int __devinit wbsd_request_irq(struct wbsd_host *host, int irq) +static int wbsd_request_irq(struct wbsd_host *host, int irq) { int ret; @@ -1502,7 +1502,7 @@ static void wbsd_release_irq(struct wbsd_host *host) * Allocate all resources for the host. */ -static int __devinit wbsd_request_resources(struct wbsd_host *host, +static int wbsd_request_resources(struct wbsd_host *host, int base, int irq, int dma) { int ret; @@ -1644,7 +1644,7 @@ static void wbsd_chip_poweroff(struct wbsd_host *host) * * \*****************************************************************************/ -static int __devinit wbsd_init(struct device *dev, int base, int irq, int dma, +static int wbsd_init(struct device *dev, int base, int irq, int dma, int pnp) { struct wbsd_host *host = NULL; @@ -1664,7 +1664,7 @@ static int __devinit wbsd_init(struct device *dev, int base, int irq, int dma, ret = wbsd_scan(host); if (ret) { if (pnp && (ret == -ENODEV)) { - printk(KERN_WARNING DRIVER_NAME + pr_warning(DRIVER_NAME ": Unable to confirm device presence. You may " "experience lock-ups.\n"); } else { @@ -1688,7 +1688,7 @@ static int __devinit wbsd_init(struct device *dev, int base, int irq, int dma, */ if (pnp) { if ((host->config != 0) && !wbsd_chip_validate(host)) { - printk(KERN_WARNING DRIVER_NAME + pr_warning(DRIVER_NAME ": PnP active but chip not configured! " "You probably have a buggy BIOS. " "Configuring chip manually.\n"); @@ -1720,7 +1720,7 @@ static int __devinit wbsd_init(struct device *dev, int base, int irq, int dma, mmc_add_host(mmc); - printk(KERN_INFO "%s: W83L51xD", mmc_hostname(mmc)); + pr_info("%s: W83L51xD", mmc_hostname(mmc)); if (host->chip_id != 0) printk(" id %x", (int)host->chip_id); printk(" at 0x%x irq %d", (int)host->base, (int)host->irq); @@ -1735,7 +1735,7 @@ static int __devinit wbsd_init(struct device *dev, int base, int irq, int dma, return 0; } -static void __devexit wbsd_shutdown(struct device *dev, int pnp) +static void wbsd_shutdown(struct device *dev, int pnp) { struct mmc_host *mmc = dev_get_drvdata(dev); struct wbsd_host *host; @@ -1762,13 +1762,13 @@ static void __devexit wbsd_shutdown(struct device *dev, int pnp) * Non-PnP */ -static int __devinit wbsd_probe(struct platform_device *dev) +static int wbsd_probe(struct platform_device *dev) { /* Use the module parameters for resources */ return wbsd_init(&dev->dev, param_io, param_irq, param_dma, 0); } -static int __devexit wbsd_remove(struct platform_device *dev) +static int wbsd_remove(struct platform_device *dev) { wbsd_shutdown(&dev->dev, 0); @@ -1781,7 +1781,7 @@ static int __devexit wbsd_remove(struct platform_device *dev) #ifdef CONFIG_PNP -static int __devinit +static int wbsd_pnp_probe(struct pnp_dev *pnpdev, const struct pnp_device_id *dev_id) { int io, irq, dma; @@ -1801,7 +1801,7 @@ wbsd_pnp_probe(struct pnp_dev *pnpdev, const struct pnp_device_id *dev_id) return wbsd_init(&pnpdev->dev, io, irq, dma, 1); } -static void __devexit wbsd_pnp_remove(struct pnp_dev *dev) +static void wbsd_pnp_remove(struct pnp_dev *dev) { wbsd_shutdown(&dev->dev, 1); } @@ -1814,28 +1814,11 @@ static void __devexit wbsd_pnp_remove(struct pnp_dev *dev) #ifdef CONFIG_PM -static int wbsd_suspend(struct wbsd_host *host, pm_message_t state) -{ - BUG_ON(host == NULL); - - return mmc_suspend_host(host->mmc); -} - -static int wbsd_resume(struct wbsd_host *host) -{ - BUG_ON(host == NULL); - - wbsd_init_device(host); - - return mmc_resume_host(host->mmc); -} - static int wbsd_platform_suspend(struct platform_device *dev, pm_message_t state) { struct mmc_host *mmc = platform_get_drvdata(dev); struct wbsd_host *host; - int ret; if (mmc == NULL) return 0; @@ -1844,12 +1827,7 @@ static int wbsd_platform_suspend(struct platform_device *dev, host = mmc_priv(mmc); - ret = wbsd_suspend(host, state); - if (ret) - return ret; - wbsd_chip_poweroff(host); - return 0; } @@ -1872,7 +1850,8 @@ static int wbsd_platform_resume(struct platform_device *dev) */ mdelay(5); - return wbsd_resume(host); + wbsd_init_device(host); + return 0; } #ifdef CONFIG_PNP @@ -1880,16 +1859,12 @@ static int wbsd_platform_resume(struct platform_device *dev) static int wbsd_pnp_suspend(struct pnp_dev *pnp_dev, pm_message_t state) { struct mmc_host *mmc = dev_get_drvdata(&pnp_dev->dev); - struct wbsd_host *host; if (mmc == NULL) return 0; DBGF("Suspending...\n"); - - host = mmc_priv(mmc); - - return wbsd_suspend(host, state); + return 0; } static int wbsd_pnp_resume(struct pnp_dev *pnp_dev) @@ -1909,7 +1884,7 @@ static int wbsd_pnp_resume(struct pnp_dev *pnp_dev) */ if (host->config != 0) { if (!wbsd_chip_validate(host)) { - printk(KERN_WARNING DRIVER_NAME + pr_warning(DRIVER_NAME ": PnP active but chip not configured! " "You probably have a buggy BIOS. " "Configuring chip manually.\n"); @@ -1922,7 +1897,8 @@ static int wbsd_pnp_resume(struct pnp_dev *pnp_dev) */ mdelay(5); - return wbsd_resume(host); + wbsd_init_device(host); + return 0; } #endif /* CONFIG_PNP */ @@ -1941,7 +1917,7 @@ static struct platform_device *wbsd_device; static struct platform_driver wbsd_driver = { .probe = wbsd_probe, - .remove = __devexit_p(wbsd_remove), + .remove = wbsd_remove, .suspend = wbsd_platform_suspend, .resume = wbsd_platform_resume, @@ -1957,7 +1933,7 @@ static struct pnp_driver wbsd_pnp_driver = { .name = DRIVER_NAME, .id_table = pnp_dev_table, .probe = wbsd_pnp_probe, - .remove = __devexit_p(wbsd_pnp_remove), + .remove = wbsd_pnp_remove, .suspend = wbsd_pnp_suspend, .resume = wbsd_pnp_resume, @@ -1973,9 +1949,9 @@ static int __init wbsd_drv_init(void) { int result; - printk(KERN_INFO DRIVER_NAME + pr_info(DRIVER_NAME ": Winbond W83L51xD SD/MMC card interface driver\n"); - printk(KERN_INFO DRIVER_NAME ": Copyright(c) Pierre Ossman\n"); + pr_info(DRIVER_NAME ": Copyright(c) Pierre Ossman\n"); #ifdef CONFIG_PNP diff --git a/drivers/mmc/host/wmt-sdmmc.c b/drivers/mmc/host/wmt-sdmmc.c new file mode 100644 index 00000000000..282891a8e45 --- /dev/null +++ b/drivers/mmc/host/wmt-sdmmc.c @@ -0,0 +1,1006 @@ +/* + * WM8505/WM8650 SD/MMC Host Controller + * + * Copyright (C) 2010 Tony Prisk + * Copyright (C) 2008 WonderMedia Technologies, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/ioport.h> +#include <linux/errno.h> +#include <linux/dma-mapping.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/clk.h> +#include <linux/gpio.h> + +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_device.h> + +#include <linux/mmc/host.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/sd.h> + +#include <asm/byteorder.h> + + +#define DRIVER_NAME "wmt-sdhc" + + +/* MMC/SD controller registers */ +#define SDMMC_CTLR 0x00 +#define SDMMC_CMD 0x01 +#define SDMMC_RSPTYPE 0x02 +#define SDMMC_ARG 0x04 +#define SDMMC_BUSMODE 0x08 +#define SDMMC_BLKLEN 0x0C +#define SDMMC_BLKCNT 0x0E +#define SDMMC_RSP 0x10 +#define SDMMC_CBCR 0x20 +#define SDMMC_INTMASK0 0x24 +#define SDMMC_INTMASK1 0x25 +#define SDMMC_STS0 0x28 +#define SDMMC_STS1 0x29 +#define SDMMC_STS2 0x2A +#define SDMMC_STS3 0x2B +#define SDMMC_RSPTIMEOUT 0x2C +#define SDMMC_CLK 0x30 /* VT8500 only */ +#define SDMMC_EXTCTRL 0x34 +#define SDMMC_SBLKLEN 0x38 +#define SDMMC_DMATIMEOUT 0x3C + + +/* SDMMC_CTLR bit fields */ +#define CTLR_CMD_START 0x01 +#define CTLR_CMD_WRITE 0x04 +#define CTLR_FIFO_RESET 0x08 + +/* SDMMC_BUSMODE bit fields */ +#define BM_SPI_MODE 0x01 +#define BM_FOURBIT_MODE 0x02 +#define BM_EIGHTBIT_MODE 0x04 +#define BM_SD_OFF 0x10 +#define BM_SPI_CS 0x20 +#define BM_SD_POWER 0x40 +#define BM_SOFT_RESET 0x80 +#define BM_ONEBIT_MASK 0xFD + +/* SDMMC_BLKLEN bit fields */ +#define BLKL_CRCERR_ABORT 0x0800 +#define BLKL_CD_POL_HIGH 0x1000 +#define BLKL_GPI_CD 0x2000 +#define BLKL_DATA3_CD 0x4000 +#define BLKL_INT_ENABLE 0x8000 + +/* SDMMC_INTMASK0 bit fields */ +#define INT0_MBLK_TRAN_DONE_INT_EN 0x10 +#define INT0_BLK_TRAN_DONE_INT_EN 0x20 +#define INT0_CD_INT_EN 0x40 +#define INT0_DI_INT_EN 0x80 + +/* SDMMC_INTMASK1 bit fields */ +#define INT1_CMD_RES_TRAN_DONE_INT_EN 0x02 +#define INT1_CMD_RES_TOUT_INT_EN 0x04 +#define INT1_MBLK_AUTO_STOP_INT_EN 0x08 +#define INT1_DATA_TOUT_INT_EN 0x10 +#define INT1_RESCRC_ERR_INT_EN 0x20 +#define INT1_RCRC_ERR_INT_EN 0x40 +#define INT1_WCRC_ERR_INT_EN 0x80 + +/* SDMMC_STS0 bit fields */ +#define STS0_WRITE_PROTECT 0x02 +#define STS0_CD_DATA3 0x04 +#define STS0_CD_GPI 0x08 +#define STS0_MBLK_DONE 0x10 +#define STS0_BLK_DONE 0x20 +#define STS0_CARD_DETECT 0x40 +#define STS0_DEVICE_INS 0x80 + +/* SDMMC_STS1 bit fields */ +#define STS1_SDIO_INT 0x01 +#define STS1_CMDRSP_DONE 0x02 +#define STS1_RSP_TIMEOUT 0x04 +#define STS1_AUTOSTOP_DONE 0x08 +#define STS1_DATA_TIMEOUT 0x10 +#define STS1_RSP_CRC_ERR 0x20 +#define STS1_RCRC_ERR 0x40 +#define STS1_WCRC_ERR 0x80 + +/* SDMMC_STS2 bit fields */ +#define STS2_CMD_RES_BUSY 0x10 +#define STS2_DATARSP_BUSY 0x20 +#define STS2_DIS_FORCECLK 0x80 + + +/* MMC/SD DMA Controller Registers */ +#define SDDMA_GCR 0x100 +#define SDDMA_IER 0x104 +#define SDDMA_ISR 0x108 +#define SDDMA_DESPR 0x10C +#define SDDMA_RBR 0x110 +#define SDDMA_DAR 0x114 +#define SDDMA_BAR 0x118 +#define SDDMA_CPR 0x11C +#define SDDMA_CCR 0x120 + + +/* SDDMA_GCR bit fields */ +#define DMA_GCR_DMA_EN 0x00000001 +#define DMA_GCR_SOFT_RESET 0x00000100 + +/* SDDMA_IER bit fields */ +#define DMA_IER_INT_EN 0x00000001 + +/* SDDMA_ISR bit fields */ +#define DMA_ISR_INT_STS 0x00000001 + +/* SDDMA_RBR bit fields */ +#define DMA_RBR_FORMAT 0x40000000 +#define DMA_RBR_END 0x80000000 + +/* SDDMA_CCR bit fields */ +#define DMA_CCR_RUN 0x00000080 +#define DMA_CCR_IF_TO_PERIPHERAL 0x00000000 +#define DMA_CCR_PERIPHERAL_TO_IF 0x00400000 + +/* SDDMA_CCR event status */ +#define DMA_CCR_EVT_NO_STATUS 0x00000000 +#define DMA_CCR_EVT_UNDERRUN 0x00000001 +#define DMA_CCR_EVT_OVERRUN 0x00000002 +#define DMA_CCR_EVT_DESP_READ 0x00000003 +#define DMA_CCR_EVT_DATA_RW 0x00000004 +#define DMA_CCR_EVT_EARLY_END 0x00000005 +#define DMA_CCR_EVT_SUCCESS 0x0000000F + +#define PDMA_READ 0x00 +#define PDMA_WRITE 0x01 + +#define WMT_SD_POWER_OFF 0 +#define WMT_SD_POWER_ON 1 + +struct wmt_dma_descriptor { + u32 flags; + u32 data_buffer_addr; + u32 branch_addr; + u32 reserved1; +}; + +struct wmt_mci_caps { + unsigned int f_min; + unsigned int f_max; + u32 ocr_avail; + u32 caps; + u32 max_seg_size; + u32 max_segs; + u32 max_blk_size; +}; + +struct wmt_mci_priv { + struct mmc_host *mmc; + void __iomem *sdmmc_base; + + int irq_regular; + int irq_dma; + + void *dma_desc_buffer; + dma_addr_t dma_desc_device_addr; + + struct completion cmdcomp; + struct completion datacomp; + + struct completion *comp_cmd; + struct completion *comp_dma; + + struct mmc_request *req; + struct mmc_command *cmd; + + struct clk *clk_sdmmc; + struct device *dev; + + u8 power_inverted; + u8 cd_inverted; +}; + +static void wmt_set_sd_power(struct wmt_mci_priv *priv, int enable) +{ + u32 reg_tmp = readb(priv->sdmmc_base + SDMMC_BUSMODE); + + if (enable ^ priv->power_inverted) + reg_tmp &= ~BM_SD_OFF; + else + reg_tmp |= BM_SD_OFF; + + writeb(reg_tmp, priv->sdmmc_base + SDMMC_BUSMODE); +} + +static void wmt_mci_read_response(struct mmc_host *mmc) +{ + struct wmt_mci_priv *priv; + int idx1, idx2; + u8 tmp_resp; + u32 response; + + priv = mmc_priv(mmc); + + for (idx1 = 0; idx1 < 4; idx1++) { + response = 0; + for (idx2 = 0; idx2 < 4; idx2++) { + if ((idx1 == 3) && (idx2 == 3)) + tmp_resp = readb(priv->sdmmc_base + SDMMC_RSP); + else + tmp_resp = readb(priv->sdmmc_base + SDMMC_RSP + + (idx1*4) + idx2 + 1); + response |= (tmp_resp << (idx2 * 8)); + } + priv->cmd->resp[idx1] = cpu_to_be32(response); + } +} + +static void wmt_mci_start_command(struct wmt_mci_priv *priv) +{ + u32 reg_tmp; + + reg_tmp = readb(priv->sdmmc_base + SDMMC_CTLR); + writeb(reg_tmp | CTLR_CMD_START, priv->sdmmc_base + SDMMC_CTLR); +} + +static int wmt_mci_send_command(struct mmc_host *mmc, u8 command, u8 cmdtype, + u32 arg, u8 rsptype) +{ + struct wmt_mci_priv *priv; + u32 reg_tmp; + + priv = mmc_priv(mmc); + + /* write command, arg, resptype registers */ + writeb(command, priv->sdmmc_base + SDMMC_CMD); + writel(arg, priv->sdmmc_base + SDMMC_ARG); + writeb(rsptype, priv->sdmmc_base + SDMMC_RSPTYPE); + + /* reset response FIFO */ + reg_tmp = readb(priv->sdmmc_base + SDMMC_CTLR); + writeb(reg_tmp | CTLR_FIFO_RESET, priv->sdmmc_base + SDMMC_CTLR); + + /* ensure clock enabled - VT3465 */ + wmt_set_sd_power(priv, WMT_SD_POWER_ON); + + /* clear status bits */ + writeb(0xFF, priv->sdmmc_base + SDMMC_STS0); + writeb(0xFF, priv->sdmmc_base + SDMMC_STS1); + writeb(0xFF, priv->sdmmc_base + SDMMC_STS2); + writeb(0xFF, priv->sdmmc_base + SDMMC_STS3); + + /* set command type */ + reg_tmp = readb(priv->sdmmc_base + SDMMC_CTLR); + writeb((reg_tmp & 0x0F) | (cmdtype << 4), + priv->sdmmc_base + SDMMC_CTLR); + + return 0; +} + +static void wmt_mci_disable_dma(struct wmt_mci_priv *priv) +{ + writel(DMA_ISR_INT_STS, priv->sdmmc_base + SDDMA_ISR); + writel(0, priv->sdmmc_base + SDDMA_IER); +} + +static void wmt_complete_data_request(struct wmt_mci_priv *priv) +{ + struct mmc_request *req; + req = priv->req; + + req->data->bytes_xfered = req->data->blksz * req->data->blocks; + + /* unmap the DMA pages used for write data */ + if (req->data->flags & MMC_DATA_WRITE) + dma_unmap_sg(mmc_dev(priv->mmc), req->data->sg, + req->data->sg_len, DMA_TO_DEVICE); + else + dma_unmap_sg(mmc_dev(priv->mmc), req->data->sg, + req->data->sg_len, DMA_FROM_DEVICE); + + /* Check if the DMA ISR returned a data error */ + if ((req->cmd->error) || (req->data->error)) + mmc_request_done(priv->mmc, req); + else { + wmt_mci_read_response(priv->mmc); + if (!req->data->stop) { + /* single-block read/write requests end here */ + mmc_request_done(priv->mmc, req); + } else { + /* + * we change the priv->cmd variable so the response is + * stored in the stop struct rather than the original + * calling command struct + */ + priv->comp_cmd = &priv->cmdcomp; + init_completion(priv->comp_cmd); + priv->cmd = req->data->stop; + wmt_mci_send_command(priv->mmc, req->data->stop->opcode, + 7, req->data->stop->arg, 9); + wmt_mci_start_command(priv); + } + } +} + +static irqreturn_t wmt_mci_dma_isr(int irq_num, void *data) +{ + struct wmt_mci_priv *priv; + + int status; + + priv = (struct wmt_mci_priv *)data; + + status = readl(priv->sdmmc_base + SDDMA_CCR) & 0x0F; + + if (status != DMA_CCR_EVT_SUCCESS) { + dev_err(priv->dev, "DMA Error: Status = %d\n", status); + priv->req->data->error = -ETIMEDOUT; + complete(priv->comp_dma); + return IRQ_HANDLED; + } + + priv->req->data->error = 0; + + wmt_mci_disable_dma(priv); + + complete(priv->comp_dma); + + if (priv->comp_cmd) { + if (completion_done(priv->comp_cmd)) { + /* + * if the command (regular) interrupt has already + * completed, finish off the request otherwise we wait + * for the command interrupt and finish from there. + */ + wmt_complete_data_request(priv); + } + } + + return IRQ_HANDLED; +} + +static irqreturn_t wmt_mci_regular_isr(int irq_num, void *data) +{ + struct wmt_mci_priv *priv; + u32 status0; + u32 status1; + u32 status2; + u32 reg_tmp; + int cmd_done; + + priv = (struct wmt_mci_priv *)data; + cmd_done = 0; + status0 = readb(priv->sdmmc_base + SDMMC_STS0); + status1 = readb(priv->sdmmc_base + SDMMC_STS1); + status2 = readb(priv->sdmmc_base + SDMMC_STS2); + + /* Check for card insertion */ + reg_tmp = readb(priv->sdmmc_base + SDMMC_INTMASK0); + if ((reg_tmp & INT0_DI_INT_EN) && (status0 & STS0_DEVICE_INS)) { + mmc_detect_change(priv->mmc, 0); + if (priv->cmd) + priv->cmd->error = -ETIMEDOUT; + if (priv->comp_cmd) + complete(priv->comp_cmd); + if (priv->comp_dma) { + wmt_mci_disable_dma(priv); + complete(priv->comp_dma); + } + writeb(STS0_DEVICE_INS, priv->sdmmc_base + SDMMC_STS0); + return IRQ_HANDLED; + } + + if ((!priv->req->data) || + ((priv->req->data->stop) && (priv->cmd == priv->req->data->stop))) { + /* handle non-data & stop_transmission requests */ + if (status1 & STS1_CMDRSP_DONE) { + priv->cmd->error = 0; + cmd_done = 1; + } else if ((status1 & STS1_RSP_TIMEOUT) || + (status1 & STS1_DATA_TIMEOUT)) { + priv->cmd->error = -ETIMEDOUT; + cmd_done = 1; + } + + if (cmd_done) { + priv->comp_cmd = NULL; + + if (!priv->cmd->error) + wmt_mci_read_response(priv->mmc); + + priv->cmd = NULL; + + mmc_request_done(priv->mmc, priv->req); + } + } else { + /* handle data requests */ + if (status1 & STS1_CMDRSP_DONE) { + if (priv->cmd) + priv->cmd->error = 0; + if (priv->comp_cmd) + complete(priv->comp_cmd); + } + + if ((status1 & STS1_RSP_TIMEOUT) || + (status1 & STS1_DATA_TIMEOUT)) { + if (priv->cmd) + priv->cmd->error = -ETIMEDOUT; + if (priv->comp_cmd) + complete(priv->comp_cmd); + if (priv->comp_dma) { + wmt_mci_disable_dma(priv); + complete(priv->comp_dma); + } + } + + if (priv->comp_dma) { + /* + * If the dma interrupt has already completed, finish + * off the request; otherwise we wait for the DMA + * interrupt and finish from there. + */ + if (completion_done(priv->comp_dma)) + wmt_complete_data_request(priv); + } + } + + writeb(status0, priv->sdmmc_base + SDMMC_STS0); + writeb(status1, priv->sdmmc_base + SDMMC_STS1); + writeb(status2, priv->sdmmc_base + SDMMC_STS2); + + return IRQ_HANDLED; +} + +static void wmt_reset_hardware(struct mmc_host *mmc) +{ + struct wmt_mci_priv *priv; + u32 reg_tmp; + + priv = mmc_priv(mmc); + + /* reset controller */ + reg_tmp = readb(priv->sdmmc_base + SDMMC_BUSMODE); + writeb(reg_tmp | BM_SOFT_RESET, priv->sdmmc_base + SDMMC_BUSMODE); + + /* reset response FIFO */ + reg_tmp = readb(priv->sdmmc_base + SDMMC_CTLR); + writeb(reg_tmp | CTLR_FIFO_RESET, priv->sdmmc_base + SDMMC_CTLR); + + /* enable GPI pin to detect card */ + writew(BLKL_INT_ENABLE | BLKL_GPI_CD, priv->sdmmc_base + SDMMC_BLKLEN); + + /* clear interrupt status */ + writeb(0xFF, priv->sdmmc_base + SDMMC_STS0); + writeb(0xFF, priv->sdmmc_base + SDMMC_STS1); + + /* setup interrupts */ + writeb(INT0_CD_INT_EN | INT0_DI_INT_EN, priv->sdmmc_base + + SDMMC_INTMASK0); + writeb(INT1_DATA_TOUT_INT_EN | INT1_CMD_RES_TRAN_DONE_INT_EN | + INT1_CMD_RES_TOUT_INT_EN, priv->sdmmc_base + SDMMC_INTMASK1); + + /* set the DMA timeout */ + writew(8191, priv->sdmmc_base + SDMMC_DMATIMEOUT); + + /* auto clock freezing enable */ + reg_tmp = readb(priv->sdmmc_base + SDMMC_STS2); + writeb(reg_tmp | STS2_DIS_FORCECLK, priv->sdmmc_base + SDMMC_STS2); + + /* set a default clock speed of 400Khz */ + clk_set_rate(priv->clk_sdmmc, 400000); +} + +static int wmt_dma_init(struct mmc_host *mmc) +{ + struct wmt_mci_priv *priv; + + priv = mmc_priv(mmc); + + writel(DMA_GCR_SOFT_RESET, priv->sdmmc_base + SDDMA_GCR); + writel(DMA_GCR_DMA_EN, priv->sdmmc_base + SDDMA_GCR); + if ((readl(priv->sdmmc_base + SDDMA_GCR) & DMA_GCR_DMA_EN) != 0) + return 0; + else + return 1; +} + +static void wmt_dma_init_descriptor(struct wmt_dma_descriptor *desc, + u16 req_count, u32 buffer_addr, u32 branch_addr, int end) +{ + desc->flags = 0x40000000 | req_count; + if (end) + desc->flags |= 0x80000000; + desc->data_buffer_addr = buffer_addr; + desc->branch_addr = branch_addr; +} + +static void wmt_dma_config(struct mmc_host *mmc, u32 descaddr, u8 dir) +{ + struct wmt_mci_priv *priv; + u32 reg_tmp; + + priv = mmc_priv(mmc); + + /* Enable DMA Interrupts */ + writel(DMA_IER_INT_EN, priv->sdmmc_base + SDDMA_IER); + + /* Write DMA Descriptor Pointer Register */ + writel(descaddr, priv->sdmmc_base + SDDMA_DESPR); + + writel(0x00, priv->sdmmc_base + SDDMA_CCR); + + if (dir == PDMA_WRITE) { + reg_tmp = readl(priv->sdmmc_base + SDDMA_CCR); + writel(reg_tmp & DMA_CCR_IF_TO_PERIPHERAL, priv->sdmmc_base + + SDDMA_CCR); + } else { + reg_tmp = readl(priv->sdmmc_base + SDDMA_CCR); + writel(reg_tmp | DMA_CCR_PERIPHERAL_TO_IF, priv->sdmmc_base + + SDDMA_CCR); + } +} + +static void wmt_dma_start(struct wmt_mci_priv *priv) +{ + u32 reg_tmp; + + reg_tmp = readl(priv->sdmmc_base + SDDMA_CCR); + writel(reg_tmp | DMA_CCR_RUN, priv->sdmmc_base + SDDMA_CCR); +} + +static void wmt_mci_request(struct mmc_host *mmc, struct mmc_request *req) +{ + struct wmt_mci_priv *priv; + struct wmt_dma_descriptor *desc; + u8 command; + u8 cmdtype; + u32 arg; + u8 rsptype; + u32 reg_tmp; + + struct scatterlist *sg; + int i; + int sg_cnt; + int offset; + u32 dma_address; + int desc_cnt; + + priv = mmc_priv(mmc); + priv->req = req; + + /* + * Use the cmd variable to pass a pointer to the resp[] structure + * This is required on multi-block requests to pass the pointer to the + * stop command + */ + priv->cmd = req->cmd; + + command = req->cmd->opcode; + arg = req->cmd->arg; + rsptype = mmc_resp_type(req->cmd); + cmdtype = 0; + + /* rsptype=7 only valid for SPI commands - should be =2 for SD */ + if (rsptype == 7) + rsptype = 2; + /* rsptype=21 is R1B, convert for controller */ + if (rsptype == 21) + rsptype = 9; + + if (!req->data) { + wmt_mci_send_command(mmc, command, cmdtype, arg, rsptype); + wmt_mci_start_command(priv); + /* completion is now handled in the regular_isr() */ + } + if (req->data) { + priv->comp_cmd = &priv->cmdcomp; + init_completion(priv->comp_cmd); + + wmt_dma_init(mmc); + + /* set controller data length */ + reg_tmp = readw(priv->sdmmc_base + SDMMC_BLKLEN); + writew((reg_tmp & 0xF800) | (req->data->blksz - 1), + priv->sdmmc_base + SDMMC_BLKLEN); + + /* set controller block count */ + writew(req->data->blocks, priv->sdmmc_base + SDMMC_BLKCNT); + + desc = (struct wmt_dma_descriptor *)priv->dma_desc_buffer; + + if (req->data->flags & MMC_DATA_WRITE) { + sg_cnt = dma_map_sg(mmc_dev(mmc), req->data->sg, + req->data->sg_len, DMA_TO_DEVICE); + cmdtype = 1; + if (req->data->blocks > 1) + cmdtype = 3; + } else { + sg_cnt = dma_map_sg(mmc_dev(mmc), req->data->sg, + req->data->sg_len, DMA_FROM_DEVICE); + cmdtype = 2; + if (req->data->blocks > 1) + cmdtype = 4; + } + + dma_address = priv->dma_desc_device_addr + 16; + desc_cnt = 0; + + for_each_sg(req->data->sg, sg, sg_cnt, i) { + offset = 0; + while (offset < sg_dma_len(sg)) { + wmt_dma_init_descriptor(desc, req->data->blksz, + sg_dma_address(sg)+offset, + dma_address, 0); + desc++; + desc_cnt++; + offset += req->data->blksz; + dma_address += 16; + if (desc_cnt == req->data->blocks) + break; + } + } + desc--; + desc->flags |= 0x80000000; + + if (req->data->flags & MMC_DATA_WRITE) + wmt_dma_config(mmc, priv->dma_desc_device_addr, + PDMA_WRITE); + else + wmt_dma_config(mmc, priv->dma_desc_device_addr, + PDMA_READ); + + wmt_mci_send_command(mmc, command, cmdtype, arg, rsptype); + + priv->comp_dma = &priv->datacomp; + init_completion(priv->comp_dma); + + wmt_dma_start(priv); + wmt_mci_start_command(priv); + } +} + +static void wmt_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct wmt_mci_priv *priv; + u32 reg_tmp; + + priv = mmc_priv(mmc); + + if (ios->power_mode == MMC_POWER_UP) { + wmt_reset_hardware(mmc); + + wmt_set_sd_power(priv, WMT_SD_POWER_ON); + } + if (ios->power_mode == MMC_POWER_OFF) + wmt_set_sd_power(priv, WMT_SD_POWER_OFF); + + if (ios->clock != 0) + clk_set_rate(priv->clk_sdmmc, ios->clock); + + switch (ios->bus_width) { + case MMC_BUS_WIDTH_8: + reg_tmp = readb(priv->sdmmc_base + SDMMC_EXTCTRL); + writeb(reg_tmp | 0x04, priv->sdmmc_base + SDMMC_EXTCTRL); + break; + case MMC_BUS_WIDTH_4: + reg_tmp = readb(priv->sdmmc_base + SDMMC_BUSMODE); + writeb(reg_tmp | BM_FOURBIT_MODE, priv->sdmmc_base + + SDMMC_BUSMODE); + + reg_tmp = readb(priv->sdmmc_base + SDMMC_EXTCTRL); + writeb(reg_tmp & 0xFB, priv->sdmmc_base + SDMMC_EXTCTRL); + break; + case MMC_BUS_WIDTH_1: + reg_tmp = readb(priv->sdmmc_base + SDMMC_BUSMODE); + writeb(reg_tmp & BM_ONEBIT_MASK, priv->sdmmc_base + + SDMMC_BUSMODE); + + reg_tmp = readb(priv->sdmmc_base + SDMMC_EXTCTRL); + writeb(reg_tmp & 0xFB, priv->sdmmc_base + SDMMC_EXTCTRL); + break; + } +} + +static int wmt_mci_get_ro(struct mmc_host *mmc) +{ + struct wmt_mci_priv *priv = mmc_priv(mmc); + + return !(readb(priv->sdmmc_base + SDMMC_STS0) & STS0_WRITE_PROTECT); +} + +static int wmt_mci_get_cd(struct mmc_host *mmc) +{ + struct wmt_mci_priv *priv = mmc_priv(mmc); + u32 cd = (readb(priv->sdmmc_base + SDMMC_STS0) & STS0_CD_GPI) >> 3; + + return !(cd ^ priv->cd_inverted); +} + +static struct mmc_host_ops wmt_mci_ops = { + .request = wmt_mci_request, + .set_ios = wmt_mci_set_ios, + .get_ro = wmt_mci_get_ro, + .get_cd = wmt_mci_get_cd, +}; + +/* Controller capabilities */ +static struct wmt_mci_caps wm8505_caps = { + .f_min = 390425, + .f_max = 50000000, + .ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | + MMC_CAP_SD_HIGHSPEED, + .max_seg_size = 65024, + .max_segs = 128, + .max_blk_size = 2048, +}; + +static struct of_device_id wmt_mci_dt_ids[] = { + { .compatible = "wm,wm8505-sdhc", .data = &wm8505_caps }, + { /* Sentinel */ }, +}; + +static int wmt_mci_probe(struct platform_device *pdev) +{ + struct mmc_host *mmc; + struct wmt_mci_priv *priv; + struct device_node *np = pdev->dev.of_node; + const struct of_device_id *of_id = + of_match_device(wmt_mci_dt_ids, &pdev->dev); + const struct wmt_mci_caps *wmt_caps; + int ret; + int regular_irq, dma_irq; + + if (!of_id || !of_id->data) { + dev_err(&pdev->dev, "Controller capabilities data missing\n"); + return -EFAULT; + } + + wmt_caps = of_id->data; + + if (!np) { + dev_err(&pdev->dev, "Missing SDMMC description in devicetree\n"); + return -EFAULT; + } + + regular_irq = irq_of_parse_and_map(np, 0); + dma_irq = irq_of_parse_and_map(np, 1); + + if (!regular_irq || !dma_irq) { + dev_err(&pdev->dev, "Getting IRQs failed!\n"); + ret = -ENXIO; + goto fail1; + } + + mmc = mmc_alloc_host(sizeof(struct wmt_mci_priv), &pdev->dev); + if (!mmc) { + dev_err(&pdev->dev, "Failed to allocate mmc_host\n"); + ret = -ENOMEM; + goto fail1; + } + + mmc->ops = &wmt_mci_ops; + mmc->f_min = wmt_caps->f_min; + mmc->f_max = wmt_caps->f_max; + mmc->ocr_avail = wmt_caps->ocr_avail; + mmc->caps = wmt_caps->caps; + + mmc->max_seg_size = wmt_caps->max_seg_size; + mmc->max_segs = wmt_caps->max_segs; + mmc->max_blk_size = wmt_caps->max_blk_size; + + mmc->max_req_size = (16*512*mmc->max_segs); + mmc->max_blk_count = mmc->max_req_size / 512; + + priv = mmc_priv(mmc); + priv->mmc = mmc; + priv->dev = &pdev->dev; + + priv->power_inverted = 0; + priv->cd_inverted = 0; + + if (of_get_property(np, "sdon-inverted", NULL)) + priv->power_inverted = 1; + if (of_get_property(np, "cd-inverted", NULL)) + priv->cd_inverted = 1; + + priv->sdmmc_base = of_iomap(np, 0); + if (!priv->sdmmc_base) { + dev_err(&pdev->dev, "Failed to map IO space\n"); + ret = -ENOMEM; + goto fail2; + } + + priv->irq_regular = regular_irq; + priv->irq_dma = dma_irq; + + ret = request_irq(regular_irq, wmt_mci_regular_isr, 0, "sdmmc", priv); + if (ret) { + dev_err(&pdev->dev, "Register regular IRQ fail\n"); + goto fail3; + } + + ret = request_irq(dma_irq, wmt_mci_dma_isr, 32, "sdmmc", priv); + if (ret) { + dev_err(&pdev->dev, "Register DMA IRQ fail\n"); + goto fail4; + } + + /* alloc some DMA buffers for descriptors/transfers */ + priv->dma_desc_buffer = dma_alloc_coherent(&pdev->dev, + mmc->max_blk_count * 16, + &priv->dma_desc_device_addr, + GFP_KERNEL); + if (!priv->dma_desc_buffer) { + dev_err(&pdev->dev, "DMA alloc fail\n"); + ret = -EPERM; + goto fail5; + } + + platform_set_drvdata(pdev, mmc); + + priv->clk_sdmmc = of_clk_get(np, 0); + if (IS_ERR(priv->clk_sdmmc)) { + dev_err(&pdev->dev, "Error getting clock\n"); + ret = PTR_ERR(priv->clk_sdmmc); + goto fail5; + } + + clk_prepare_enable(priv->clk_sdmmc); + + /* configure the controller to a known 'ready' state */ + wmt_reset_hardware(mmc); + + mmc_add_host(mmc); + + dev_info(&pdev->dev, "WMT SDHC Controller initialized\n"); + + return 0; +fail5: + free_irq(dma_irq, priv); +fail4: + free_irq(regular_irq, priv); +fail3: + iounmap(priv->sdmmc_base); +fail2: + mmc_free_host(mmc); +fail1: + return ret; +} + +static int wmt_mci_remove(struct platform_device *pdev) +{ + struct mmc_host *mmc; + struct wmt_mci_priv *priv; + struct resource *res; + u32 reg_tmp; + + mmc = platform_get_drvdata(pdev); + priv = mmc_priv(mmc); + + /* reset SD controller */ + reg_tmp = readb(priv->sdmmc_base + SDMMC_BUSMODE); + writel(reg_tmp | BM_SOFT_RESET, priv->sdmmc_base + SDMMC_BUSMODE); + reg_tmp = readw(priv->sdmmc_base + SDMMC_BLKLEN); + writew(reg_tmp & ~(0xA000), priv->sdmmc_base + SDMMC_BLKLEN); + writeb(0xFF, priv->sdmmc_base + SDMMC_STS0); + writeb(0xFF, priv->sdmmc_base + SDMMC_STS1); + + /* release the dma buffers */ + dma_free_coherent(&pdev->dev, priv->mmc->max_blk_count * 16, + priv->dma_desc_buffer, priv->dma_desc_device_addr); + + mmc_remove_host(mmc); + + free_irq(priv->irq_regular, priv); + free_irq(priv->irq_dma, priv); + + iounmap(priv->sdmmc_base); + + clk_disable_unprepare(priv->clk_sdmmc); + clk_put(priv->clk_sdmmc); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, resource_size(res)); + + mmc_free_host(mmc); + + dev_info(&pdev->dev, "WMT MCI device removed\n"); + + return 0; +} + +#ifdef CONFIG_PM +static int wmt_mci_suspend(struct device *dev) +{ + u32 reg_tmp; + struct platform_device *pdev = to_platform_device(dev); + struct mmc_host *mmc = platform_get_drvdata(pdev); + struct wmt_mci_priv *priv; + + if (!mmc) + return 0; + + priv = mmc_priv(mmc); + reg_tmp = readb(priv->sdmmc_base + SDMMC_BUSMODE); + writeb(reg_tmp | BM_SOFT_RESET, priv->sdmmc_base + + SDMMC_BUSMODE); + + reg_tmp = readw(priv->sdmmc_base + SDMMC_BLKLEN); + writew(reg_tmp & 0x5FFF, priv->sdmmc_base + SDMMC_BLKLEN); + + writeb(0xFF, priv->sdmmc_base + SDMMC_STS0); + writeb(0xFF, priv->sdmmc_base + SDMMC_STS1); + + clk_disable(priv->clk_sdmmc); + return 0; +} + +static int wmt_mci_resume(struct device *dev) +{ + u32 reg_tmp; + struct platform_device *pdev = to_platform_device(dev); + struct mmc_host *mmc = platform_get_drvdata(pdev); + struct wmt_mci_priv *priv; + + if (mmc) { + priv = mmc_priv(mmc); + clk_enable(priv->clk_sdmmc); + + reg_tmp = readb(priv->sdmmc_base + SDMMC_BUSMODE); + writeb(reg_tmp | BM_SOFT_RESET, priv->sdmmc_base + + SDMMC_BUSMODE); + + reg_tmp = readw(priv->sdmmc_base + SDMMC_BLKLEN); + writew(reg_tmp | (BLKL_GPI_CD | BLKL_INT_ENABLE), + priv->sdmmc_base + SDMMC_BLKLEN); + + reg_tmp = readb(priv->sdmmc_base + SDMMC_INTMASK0); + writeb(reg_tmp | INT0_DI_INT_EN, priv->sdmmc_base + + SDMMC_INTMASK0); + + } + + return 0; +} + +static const struct dev_pm_ops wmt_mci_pm = { + .suspend = wmt_mci_suspend, + .resume = wmt_mci_resume, +}; + +#define wmt_mci_pm_ops (&wmt_mci_pm) + +#else /* !CONFIG_PM */ + +#define wmt_mci_pm_ops NULL + +#endif + +static struct platform_driver wmt_mci_driver = { + .probe = wmt_mci_probe, + .remove = wmt_mci_remove, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + .pm = wmt_mci_pm_ops, + .of_match_table = wmt_mci_dt_ids, + }, +}; + +module_platform_driver(wmt_mci_driver); + +MODULE_DESCRIPTION("Wondermedia MMC/SD Driver"); +MODULE_AUTHOR("Tony Prisk"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, wmt_mci_dt_ids); |