diff options
Diffstat (limited to 'drivers/mmc/host/sdhci.c')
| -rw-r--r-- | drivers/mmc/host/sdhci.c | 1475 |
1 files changed, 864 insertions, 611 deletions
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 8d66706824a..47055f3f01b 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -27,6 +27,8 @@ #include <linux/mmc/mmc.h> #include <linux/mmc/host.h> +#include <linux/mmc/card.h> +#include <linux/mmc/slot-gpio.h> #include "sdhci.h" @@ -42,19 +44,23 @@ #define MAX_TUNING_LOOP 40 +#define ADMA_SIZE ((128 * 2 + 1) * 4) + static unsigned int debug_quirks = 0; static unsigned int debug_quirks2; static void sdhci_finish_data(struct sdhci_host *); -static void sdhci_send_command(struct sdhci_host *, struct mmc_command *); static void sdhci_finish_command(struct sdhci_host *); static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode); static void sdhci_tuning_timer(unsigned long data); +static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable); #ifdef CONFIG_PM_RUNTIME static int sdhci_runtime_pm_get(struct sdhci_host *host); static int sdhci_runtime_pm_put(struct sdhci_host *host); +static void sdhci_runtime_pm_bus_on(struct sdhci_host *host); +static void sdhci_runtime_pm_bus_off(struct sdhci_host *host); #else static inline int sdhci_runtime_pm_get(struct sdhci_host *host) { @@ -64,6 +70,12 @@ static inline int sdhci_runtime_pm_put(struct sdhci_host *host) { return 0; } +static void sdhci_runtime_pm_bus_on(struct sdhci_host *host) +{ +} +static void sdhci_runtime_pm_bus_off(struct sdhci_host *host) +{ +} #endif static void sdhci_dumpregs(struct sdhci_host *host) @@ -121,43 +133,26 @@ static void sdhci_dumpregs(struct sdhci_host *host) * * \*****************************************************************************/ -static void sdhci_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set) -{ - u32 ier; - - ier = sdhci_readl(host, SDHCI_INT_ENABLE); - ier &= ~clear; - ier |= set; - sdhci_writel(host, ier, SDHCI_INT_ENABLE); - sdhci_writel(host, ier, SDHCI_SIGNAL_ENABLE); -} - -static void sdhci_unmask_irqs(struct sdhci_host *host, u32 irqs) -{ - sdhci_clear_set_irqs(host, 0, irqs); -} - -static void sdhci_mask_irqs(struct sdhci_host *host, u32 irqs) -{ - sdhci_clear_set_irqs(host, irqs, 0); -} - static void sdhci_set_card_detection(struct sdhci_host *host, bool enable) { - u32 present, irqs; + u32 present; if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) || - !mmc_card_is_removable(host->mmc)) + (host->mmc->caps & MMC_CAP_NONREMOVABLE)) return; - present = sdhci_readl(host, SDHCI_PRESENT_STATE) & - SDHCI_CARD_PRESENT; - irqs = present ? SDHCI_INT_CARD_REMOVE : SDHCI_INT_CARD_INSERT; + if (enable) { + present = sdhci_readl(host, SDHCI_PRESENT_STATE) & + SDHCI_CARD_PRESENT; + + host->ier |= present ? SDHCI_INT_CARD_REMOVE : + SDHCI_INT_CARD_INSERT; + } else { + host->ier &= ~(SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT); + } - if (enable) - sdhci_unmask_irqs(host, irqs); - else - sdhci_mask_irqs(host, irqs); + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); } static void sdhci_enable_card_detection(struct sdhci_host *host) @@ -170,27 +165,18 @@ static void sdhci_disable_card_detection(struct sdhci_host *host) sdhci_set_card_detection(host, false); } -static void sdhci_reset(struct sdhci_host *host, u8 mask) +void sdhci_reset(struct sdhci_host *host, u8 mask) { unsigned long timeout; - u32 uninitialized_var(ier); - - if (host->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) { - if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & - SDHCI_CARD_PRESENT)) - return; - } - - if (host->quirks & SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET) - ier = sdhci_readl(host, SDHCI_INT_ENABLE); - - if (host->ops->platform_reset_enter) - host->ops->platform_reset_enter(host, mask); sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET); - if (mask & SDHCI_RESET_ALL) + if (mask & SDHCI_RESET_ALL) { host->clock = 0; + /* Reset-all turns off SD Bus Power */ + if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON) + sdhci_runtime_pm_bus_off(host); + } /* Wait max 100 ms */ timeout = 100; @@ -206,16 +192,27 @@ static void sdhci_reset(struct sdhci_host *host, u8 mask) timeout--; mdelay(1); } +} +EXPORT_SYMBOL_GPL(sdhci_reset); - if (host->ops->platform_reset_exit) - host->ops->platform_reset_exit(host, mask); +static void sdhci_do_reset(struct sdhci_host *host, u8 mask) +{ + if (host->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) { + if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & + SDHCI_CARD_PRESENT)) + return; + } - if (host->quirks & SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET) - sdhci_clear_set_irqs(host, SDHCI_INT_ALL_MASK, ier); + host->ops->reset(host, mask); - if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) { - if ((host->ops->enable_dma) && (mask & SDHCI_RESET_ALL)) - host->ops->enable_dma(host); + if (mask & SDHCI_RESET_ALL) { + if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) { + if (host->ops->enable_dma) + host->ops->enable_dma(host); + } + + /* Resetting the controller clears many */ + host->preset_enabled = false; } } @@ -224,15 +221,18 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios); static void sdhci_init(struct sdhci_host *host, int soft) { if (soft) - sdhci_reset(host, SDHCI_RESET_CMD|SDHCI_RESET_DATA); + sdhci_do_reset(host, SDHCI_RESET_CMD|SDHCI_RESET_DATA); else - sdhci_reset(host, SDHCI_RESET_ALL); + sdhci_do_reset(host, SDHCI_RESET_ALL); + + host->ier = SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT | + SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | + SDHCI_INT_INDEX | SDHCI_INT_END_BIT | SDHCI_INT_CRC | + SDHCI_INT_TIMEOUT | SDHCI_INT_DATA_END | + SDHCI_INT_RESPONSE; - sdhci_clear_set_irqs(host, SDHCI_INT_ALL_MASK, - SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT | - SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX | - SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT | - SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE); + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); if (soft) { /* force clock reconfiguration */ @@ -244,6 +244,19 @@ static void sdhci_init(struct sdhci_host *host, int soft) static void sdhci_reinit(struct sdhci_host *host) { sdhci_init(host, 0); + /* + * Retuning stuffs are affected by different cards inserted and only + * applicable to UHS-I cards. So reset these fields to their initial + * value when card is removed. + */ + if (host->flags & SDHCI_USING_RETUNING_TIMER) { + host->flags &= ~SDHCI_USING_RETUNING_TIMER; + + del_timer_sync(&host->tuning_timer); + host->flags &= ~SDHCI_NEEDS_RETUNING; + host->mmc->max_blk_count = + (host->quirks & SDHCI_QUIRK_NO_MULTIBLOCK) ? 1 : 65535; + } sdhci_enable_card_detection(host); } @@ -475,11 +488,6 @@ static int sdhci_adma_table_pre(struct sdhci_host *host, else direction = DMA_TO_DEVICE; - /* - * The ADMA descriptor table is mapped further down as we - * need to fill it with data first. - */ - host->align_addr = dma_map_single(mmc_dev(host->mmc), host->align_buffer, 128 * 4, direction); if (dma_mapping_error(mmc_dev(host->mmc), host->align_addr)) @@ -540,7 +548,7 @@ static int sdhci_adma_table_pre(struct sdhci_host *host, * If this triggers then we have a calculation bug * somewhere. :/ */ - WARN_ON((desc - host->adma_desc) > (128 * 2 + 1) * 4); + WARN_ON((desc - host->adma_desc) > ADMA_SIZE); } if (host->quirks & SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC) { @@ -568,17 +576,8 @@ static int sdhci_adma_table_pre(struct sdhci_host *host, host->align_addr, 128 * 4, direction); } - host->adma_addr = dma_map_single(mmc_dev(host->mmc), - host->adma_desc, (128 * 2 + 1) * 4, DMA_TO_DEVICE); - if (dma_mapping_error(mmc_dev(host->mmc), host->adma_addr)) - goto unmap_entries; - BUG_ON(host->adma_addr & 0x3); - return 0; -unmap_entries: - dma_unmap_sg(mmc_dev(host->mmc), data->sg, - data->sg_len, direction); unmap_align: dma_unmap_single(mmc_dev(host->mmc), host->align_addr, 128 * 4, direction); @@ -596,19 +595,25 @@ static void sdhci_adma_table_post(struct sdhci_host *host, u8 *align; char *buffer; unsigned long flags; + bool has_unaligned; if (data->flags & MMC_DATA_READ) direction = DMA_FROM_DEVICE; else direction = DMA_TO_DEVICE; - dma_unmap_single(mmc_dev(host->mmc), host->adma_addr, - (128 * 2 + 1) * 4, DMA_TO_DEVICE); - dma_unmap_single(mmc_dev(host->mmc), host->align_addr, 128 * 4, direction); - if (data->flags & MMC_DATA_READ) { + /* Do a quick scan of the SG list for any unaligned mappings */ + has_unaligned = false; + for_each_sg(data->sg, sg, host->sg_count, i) + if (sg_dma_address(sg) & 3) { + has_unaligned = true; + break; + } + + if (has_unaligned && data->flags & MMC_DATA_READ) { dma_sync_sg_for_cpu(mmc_dev(host->mmc), data->sg, data->sg_len, direction); @@ -648,12 +653,12 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd) return 0xE; /* Unspecified timeout, assume max */ - if (!data && !cmd->cmd_timeout_ms) + if (!data && !cmd->busy_timeout) return 0xE; /* timeout in us */ if (!data) - target_timeout = cmd->cmd_timeout_ms * 1000; + target_timeout = cmd->busy_timeout * 1000; else { target_timeout = data->timeout_ns / 1000; if (host->clock) @@ -680,8 +685,8 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd) } if (count >= 0xF) { - pr_warning("%s: Too large timeout requested for CMD%d!\n", - mmc_hostname(host->mmc), cmd->opcode); + DBG("%s: Too large timeout 0x%x requested for CMD%d!\n", + mmc_hostname(host->mmc), count, cmd->opcode); count = 0xE; } @@ -694,9 +699,12 @@ static void sdhci_set_transfer_irqs(struct sdhci_host *host) u32 dma_irqs = SDHCI_INT_DMA_END | SDHCI_INT_ADMA_ERROR; if (host->flags & SDHCI_REQ_USE_DMA) - sdhci_clear_set_irqs(host, pio_irqs, dma_irqs); + host->ier = (host->ier & ~pio_irqs) | dma_irqs; else - sdhci_clear_set_irqs(host, dma_irqs, pio_irqs); + host->ier = (host->ier & ~dma_irqs) | pio_irqs; + + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); } static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) @@ -871,8 +879,13 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host, u16 mode; struct mmc_data *data = cmd->data; - if (data == NULL) + if (data == NULL) { + /* clear Auto CMD settings for no data CMDs */ + mode = sdhci_readw(host, SDHCI_TRANSFER_MODE); + sdhci_writew(host, mode & ~(SDHCI_TRNS_AUTO_CMD12 | + SDHCI_TRNS_AUTO_CMD23), SDHCI_TRANSFER_MODE); return; + } WARN_ON(!host->data); @@ -944,8 +957,8 @@ static void sdhci_finish_data(struct sdhci_host *host) * upon error conditions. */ if (data->error) { - sdhci_reset(host, SDHCI_RESET_CMD); - sdhci_reset(host, SDHCI_RESET_DATA); + sdhci_do_reset(host, SDHCI_RESET_CMD); + sdhci_do_reset(host, SDHCI_RESET_DATA); } sdhci_send_command(host, data->stop); @@ -953,7 +966,7 @@ static void sdhci_finish_data(struct sdhci_host *host) tasklet_schedule(&host->finish_tasklet); } -static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) +void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) { int flags; u32 mask; @@ -986,7 +999,12 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) mdelay(1); } - mod_timer(&host->timer, jiffies + 10 * HZ); + timeout = jiffies; + if (!cmd->data && cmd->busy_timeout > 9000) + timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ; + else + timeout += 10 * HZ; + mod_timer(&host->timer, timeout); host->cmd = cmd; @@ -1025,6 +1043,7 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND); } +EXPORT_SYMBOL_GPL(sdhci_send_command); static void sdhci_finish_command(struct sdhci_host *host) { @@ -1067,59 +1086,87 @@ static void sdhci_finish_command(struct sdhci_host *host) } } -static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) +static u16 sdhci_get_preset_value(struct sdhci_host *host) +{ + u16 preset = 0; + + switch (host->timing) { + case MMC_TIMING_UHS_SDR12: + preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR12); + break; + case MMC_TIMING_UHS_SDR25: + preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR25); + break; + case MMC_TIMING_UHS_SDR50: + preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR50); + break; + case MMC_TIMING_UHS_SDR104: + case MMC_TIMING_MMC_HS200: + preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR104); + break; + case MMC_TIMING_UHS_DDR50: + preset = sdhci_readw(host, SDHCI_PRESET_FOR_DDR50); + break; + default: + pr_warn("%s: Invalid UHS-I mode selected\n", + mmc_hostname(host->mmc)); + preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR12); + break; + } + return preset; +} + +void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) { int div = 0; /* Initialized for compiler warning */ int real_div = div, clk_mul = 1; u16 clk = 0; unsigned long timeout; - if (clock && clock == host->clock) - return; - host->mmc->actual_clock = 0; - if (host->ops->set_clock) { - host->ops->set_clock(host, clock); - if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK) - return; - } - sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); if (clock == 0) - goto out; + return; if (host->version >= SDHCI_SPEC_300) { + if (host->preset_enabled) { + u16 pre_val; + + clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + pre_val = sdhci_get_preset_value(host); + div = (pre_val & SDHCI_PRESET_SDCLK_FREQ_MASK) + >> SDHCI_PRESET_SDCLK_FREQ_SHIFT; + if (host->clk_mul && + (pre_val & SDHCI_PRESET_CLKGEN_SEL_MASK)) { + clk = SDHCI_PROG_CLOCK_MODE; + real_div = div + 1; + clk_mul = host->clk_mul; + } else { + real_div = max_t(int, 1, div << 1); + } + goto clock_set; + } + /* * Check if the Host Controller supports Programmable Clock * Mode. */ if (host->clk_mul) { - u16 ctrl; - + for (div = 1; div <= 1024; div++) { + if ((host->max_clk * host->clk_mul / div) + <= clock) + break; + } /* - * We need to figure out whether the Host Driver needs - * to select Programmable Clock Mode, or the value can - * be set automatically by the Host Controller based on - * the Preset Value registers. + * Set Programmable Clock Mode in the Clock + * Control register. */ - ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); - if (!(ctrl & SDHCI_CTRL_PRESET_VAL_ENABLE)) { - for (div = 1; div <= 1024; div++) { - if (((host->max_clk * host->clk_mul) / - div) <= clock) - break; - } - /* - * Set Programmable Clock Mode in the Clock - * Control register. - */ - clk = SDHCI_PROG_CLOCK_MODE; - real_div = div; - clk_mul = host->clk_mul; - div--; - } + clk = SDHCI_PROG_CLOCK_MODE; + real_div = div; + clk_mul = host->clk_mul; + div--; } else { /* Version 3.00 divisors must be a multiple of 2. */ if (host->max_clk <= clock) @@ -1144,6 +1191,7 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) div >>= 1; } +clock_set: if (real_div) host->mmc->actual_clock = (host->max_clk * clk_mul) / real_div; @@ -1169,17 +1217,16 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) clk |= SDHCI_CLOCK_CARD_EN; sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); - -out: - host->clock = clock; } +EXPORT_SYMBOL_GPL(sdhci_set_clock); -static int sdhci_set_power(struct sdhci_host *host, unsigned short power) +static void sdhci_set_power(struct sdhci_host *host, unsigned char mode, + unsigned short vdd) { u8 pwr = 0; - if (power != (unsigned short)-1) { - switch (1 << power) { + if (mode != MMC_POWER_OFF) { + switch (1 << vdd) { case MMC_VDD_165_195: pwr = SDHCI_POWER_180; break; @@ -1197,41 +1244,51 @@ static int sdhci_set_power(struct sdhci_host *host, unsigned short power) } if (host->pwr == pwr) - return -1; + return; host->pwr = pwr; if (pwr == 0) { sdhci_writeb(host, 0, SDHCI_POWER_CONTROL); - return 0; - } + if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON) + sdhci_runtime_pm_bus_off(host); + vdd = 0; + } else { + /* + * Spec says that we should clear the power reg before setting + * a new value. Some controllers don't seem to like this though. + */ + if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE)) + sdhci_writeb(host, 0, SDHCI_POWER_CONTROL); - /* - * Spec says that we should clear the power reg before setting - * a new value. Some controllers don't seem to like this though. - */ - if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE)) - sdhci_writeb(host, 0, SDHCI_POWER_CONTROL); + /* + * At least the Marvell CaFe chip gets confused if we set the + * voltage and set turn on power at the same time, so set the + * voltage first. + */ + if (host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER) + sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); - /* - * At least the Marvell CaFe chip gets confused if we set the voltage - * and set turn on power at the same time, so set the voltage first. - */ - if (host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER) - sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); + pwr |= SDHCI_POWER_ON; - pwr |= SDHCI_POWER_ON; + sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); - sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); + if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON) + sdhci_runtime_pm_bus_on(host); - /* - * Some controllers need an extra 10ms delay of 10ms before they - * can apply clock after applying power - */ - if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER) - mdelay(10); + /* + * Some controllers need an extra 10ms delay of 10ms before + * they can apply clock after applying power + */ + if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER) + mdelay(10); + } - return power; + if (host->vmmc) { + spin_unlock_irq(&host->lock); + mmc_regulator_set_ocr(host->mmc, host->vmmc, vdd); + spin_lock_irq(&host->lock); + } } /*****************************************************************************\ @@ -1243,8 +1300,9 @@ static int sdhci_set_power(struct sdhci_host *host, unsigned short power) static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) { struct sdhci_host *host; - bool present; + int present; unsigned long flags; + u32 tuning_opcode; host = mmc_priv(mmc); @@ -1271,12 +1329,22 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) host->mrq = mrq; - /* If polling, assume that the card is always present. */ - if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) - present = true; - else - present = sdhci_readl(host, SDHCI_PRESENT_STATE) & - SDHCI_CARD_PRESENT; + /* + * Firstly check card presence from cd-gpio. The return could + * be one of the following possibilities: + * negative: cd-gpio is not available + * zero: cd-gpio is used, and card is removed + * one: cd-gpio is used, and card is present + */ + present = mmc_gpio_get_cd(host->mmc); + if (present < 0) { + /* If polling, assume that the card is always present. */ + if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) + present = 1; + else + present = sdhci_readl(host, SDHCI_PRESENT_STATE) & + SDHCI_CARD_PRESENT; + } if (!present || host->flags & SDHCI_DEVICE_DEAD) { host->mrq->cmd->error = -ENOMEDIUM; @@ -1292,12 +1360,26 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) */ if ((host->flags & SDHCI_NEEDS_RETUNING) && !(present_state & (SDHCI_DOING_WRITE | SDHCI_DOING_READ))) { - spin_unlock_irqrestore(&host->lock, flags); - sdhci_execute_tuning(mmc, mrq->cmd->opcode); - spin_lock_irqsave(&host->lock, flags); + if (mmc->card) { + /* eMMC uses cmd21 but sd and sdio use cmd19 */ + tuning_opcode = + mmc->card->type == MMC_TYPE_MMC ? + MMC_SEND_TUNING_BLOCK_HS200 : + MMC_SEND_TUNING_BLOCK; + + /* Here we need to set the host->mrq to NULL, + * in case the pending finish_tasklet + * finishes it incorrectly. + */ + host->mrq = NULL; + + spin_unlock_irqrestore(&host->lock, flags); + sdhci_execute_tuning(mmc, tuning_opcode); + spin_lock_irqsave(&host->lock, flags); - /* Restore original mmc_request structure */ - host->mrq = mrq; + /* Restore original mmc_request structure */ + host->mrq = mrq; + } } if (mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23)) @@ -1310,10 +1392,53 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) spin_unlock_irqrestore(&host->lock, flags); } +void sdhci_set_bus_width(struct sdhci_host *host, int width) +{ + u8 ctrl; + + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); + if (width == MMC_BUS_WIDTH_8) { + ctrl &= ~SDHCI_CTRL_4BITBUS; + if (host->version >= SDHCI_SPEC_300) + ctrl |= SDHCI_CTRL_8BITBUS; + } else { + if (host->version >= SDHCI_SPEC_300) + ctrl &= ~SDHCI_CTRL_8BITBUS; + if (width == MMC_BUS_WIDTH_4) + ctrl |= SDHCI_CTRL_4BITBUS; + else + ctrl &= ~SDHCI_CTRL_4BITBUS; + } + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); +} +EXPORT_SYMBOL_GPL(sdhci_set_bus_width); + +void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing) +{ + u16 ctrl_2; + + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + /* Select Bus Speed Mode for host */ + ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; + if ((timing == MMC_TIMING_MMC_HS200) || + (timing == MMC_TIMING_UHS_SDR104)) + ctrl_2 |= SDHCI_CTRL_UHS_SDR104; + else if (timing == MMC_TIMING_UHS_SDR12) + ctrl_2 |= SDHCI_CTRL_UHS_SDR12; + else if (timing == MMC_TIMING_UHS_SDR25) + ctrl_2 |= SDHCI_CTRL_UHS_SDR25; + else if (timing == MMC_TIMING_UHS_SDR50) + ctrl_2 |= SDHCI_CTRL_UHS_SDR50; + else if ((timing == MMC_TIMING_UHS_DDR50) || + (timing == MMC_TIMING_MMC_DDR52)) + ctrl_2 |= SDHCI_CTRL_UHS_DDR50; + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); +} +EXPORT_SYMBOL_GPL(sdhci_set_uhs_signaling); + static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios) { unsigned long flags; - int vdd_bit = -1; u8 ctrl; spin_lock_irqsave(&host->lock, flags); @@ -1334,45 +1459,22 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios) sdhci_reinit(host); } - sdhci_set_clock(host, ios->clock); - - if (ios->power_mode == MMC_POWER_OFF) - vdd_bit = sdhci_set_power(host, -1); - else - vdd_bit = sdhci_set_power(host, ios->vdd); + if (host->version >= SDHCI_SPEC_300 && + (ios->power_mode == MMC_POWER_UP) && + !(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN)) + sdhci_enable_preset_value(host, false); - if (host->vmmc && vdd_bit != -1) { - spin_unlock_irqrestore(&host->lock, flags); - mmc_regulator_set_ocr(host->mmc, host->vmmc, vdd_bit); - spin_lock_irqsave(&host->lock, flags); + if (!ios->clock || ios->clock != host->clock) { + host->ops->set_clock(host, ios->clock); + host->clock = ios->clock; } + sdhci_set_power(host, ios->power_mode, ios->vdd); + if (host->ops->platform_send_init_74_clocks) host->ops->platform_send_init_74_clocks(host, ios->power_mode); - /* - * If your platform has 8-bit width support but is not a v3 controller, - * or if it requires special setup code, you should implement that in - * platform_8bit_width(). - */ - if (host->ops->platform_8bit_width) - host->ops->platform_8bit_width(host, ios->bus_width); - else { - ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); - if (ios->bus_width == MMC_BUS_WIDTH_8) { - ctrl &= ~SDHCI_CTRL_4BITBUS; - if (host->version >= SDHCI_SPEC_300) - ctrl |= SDHCI_CTRL_8BITBUS; - } else { - if (host->version >= SDHCI_SPEC_300) - ctrl &= ~SDHCI_CTRL_8BITBUS; - if (ios->bus_width == MMC_BUS_WIDTH_4) - ctrl |= SDHCI_CTRL_4BITBUS; - else - ctrl &= ~SDHCI_CTRL_4BITBUS; - } - sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); - } + host->ops->set_bus_width(host, ios->bus_width); ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); @@ -1385,23 +1487,23 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios) if (host->version >= SDHCI_SPEC_300) { u16 clk, ctrl_2; - unsigned int clock; /* In case of UHS-I modes, set High Speed Enable */ if ((ios->timing == MMC_TIMING_MMC_HS200) || + (ios->timing == MMC_TIMING_MMC_DDR52) || (ios->timing == MMC_TIMING_UHS_SDR50) || (ios->timing == MMC_TIMING_UHS_SDR104) || (ios->timing == MMC_TIMING_UHS_DDR50) || (ios->timing == MMC_TIMING_UHS_SDR25)) ctrl |= SDHCI_CTRL_HISPD; - ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); - if (!(ctrl_2 & SDHCI_CTRL_PRESET_VAL_ENABLE)) { + if (!host->preset_enabled) { sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); /* * We only need to set Driver Strength if the * preset value enable is not set. */ + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); ctrl_2 &= ~SDHCI_CTRL_DRV_TYPE_MASK; if (ios->drv_type == MMC_SET_DRIVER_TYPE_A) ctrl_2 |= SDHCI_CTRL_DRV_TYPE_A; @@ -1425,9 +1527,7 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios) sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); /* Re-enable SD Clock */ - clock = host->clock; - host->clock = 0; - sdhci_set_clock(host, clock); + host->ops->set_clock(host, host->clock); } @@ -1436,31 +1536,25 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios) clk &= ~SDHCI_CLOCK_CARD_EN; sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); - if (host->ops->set_uhs_signaling) - host->ops->set_uhs_signaling(host, ios->timing); - else { - ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); - /* Select Bus Speed Mode for host */ - ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; - if (ios->timing == MMC_TIMING_MMC_HS200) - ctrl_2 |= SDHCI_CTRL_HS_SDR200; - else if (ios->timing == MMC_TIMING_UHS_SDR12) - ctrl_2 |= SDHCI_CTRL_UHS_SDR12; - else if (ios->timing == MMC_TIMING_UHS_SDR25) - ctrl_2 |= SDHCI_CTRL_UHS_SDR25; - else if (ios->timing == MMC_TIMING_UHS_SDR50) - ctrl_2 |= SDHCI_CTRL_UHS_SDR50; - else if (ios->timing == MMC_TIMING_UHS_SDR104) - ctrl_2 |= SDHCI_CTRL_UHS_SDR104; - else if (ios->timing == MMC_TIMING_UHS_DDR50) - ctrl_2 |= SDHCI_CTRL_UHS_DDR50; - sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); + host->ops->set_uhs_signaling(host, ios->timing); + host->timing = ios->timing; + + if (!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN) && + ((ios->timing == MMC_TIMING_UHS_SDR12) || + (ios->timing == MMC_TIMING_UHS_SDR25) || + (ios->timing == MMC_TIMING_UHS_SDR50) || + (ios->timing == MMC_TIMING_UHS_SDR104) || + (ios->timing == MMC_TIMING_UHS_DDR50))) { + u16 preset; + + sdhci_enable_preset_value(host, true); + preset = sdhci_get_preset_value(host); + ios->drv_type = (preset & SDHCI_PRESET_DRV_MASK) + >> SDHCI_PRESET_DRV_SHIFT; } /* Re-enable SD Clock */ - clock = host->clock; - host->clock = 0; - sdhci_set_clock(host, clock); + host->ops->set_clock(host, host->clock); } else sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); @@ -1470,7 +1564,7 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios) * it on each ios seems to solve the problem. */ if(host->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS) - sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA); + sdhci_do_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA); mmiowb(); spin_unlock_irqrestore(&host->lock, flags); @@ -1485,6 +1579,37 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) sdhci_runtime_pm_put(host); } +static int sdhci_do_get_cd(struct sdhci_host *host) +{ + int gpio_cd = mmc_gpio_get_cd(host->mmc); + + if (host->flags & SDHCI_DEVICE_DEAD) + return 0; + + /* If polling/nonremovable, assume that the card is always present. */ + if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) || + (host->mmc->caps & MMC_CAP_NONREMOVABLE)) + return 1; + + /* Try slot gpio detect */ + if (!IS_ERR_VALUE(gpio_cd)) + return !!gpio_cd; + + /* Host native card detect */ + return !!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT); +} + +static int sdhci_get_cd(struct mmc_host *mmc) +{ + struct sdhci_host *host = mmc_priv(mmc); + int ret; + + sdhci_runtime_pm_get(host); + ret = sdhci_do_get_cd(host); + sdhci_runtime_pm_put(host); + return ret; +} + static int sdhci_check_ro(struct sdhci_host *host) { unsigned long flags; @@ -1548,24 +1673,16 @@ static int sdhci_get_ro(struct mmc_host *mmc) static void sdhci_enable_sdio_irq_nolock(struct sdhci_host *host, int enable) { - if (host->flags & SDHCI_DEVICE_DEAD) - goto out; - - if (enable) - host->flags |= SDHCI_SDIO_IRQ_ENABLED; - else - host->flags &= ~SDHCI_SDIO_IRQ_ENABLED; - - /* SDIO IRQ will be enabled as appropriate in runtime resume */ - if (host->runtime_suspended) - goto out; + if (!(host->flags & SDHCI_DEVICE_DEAD)) { + if (enable) + host->ier |= SDHCI_INT_CARD_INT; + else + host->ier &= ~SDHCI_INT_CARD_INT; - if (enable) - sdhci_unmask_irqs(host, SDHCI_INT_CARD_INT); - else - sdhci_mask_irqs(host, SDHCI_INT_CARD_INT); -out: - mmiowb(); + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); + mmiowb(); + } } static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable) @@ -1573,17 +1690,25 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable) struct sdhci_host *host = mmc_priv(mmc); unsigned long flags; + sdhci_runtime_pm_get(host); + spin_lock_irqsave(&host->lock, flags); + if (enable) + host->flags |= SDHCI_SDIO_IRQ_ENABLED; + else + host->flags &= ~SDHCI_SDIO_IRQ_ENABLED; + sdhci_enable_sdio_irq_nolock(host, enable); spin_unlock_irqrestore(&host->lock, flags); + + sdhci_runtime_pm_put(host); } static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host, struct mmc_ios *ios) { - u8 pwr; - u16 clk, ctrl; - u32 present_state; + u16 ctrl; + int ret; /* * Signal Voltage Switching is only applicable for Host Controllers @@ -1592,16 +1717,22 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host, if (host->version < SDHCI_SPEC_300) return 0; - /* - * We first check whether the request is to set signalling voltage - * to 3.3V. If so, we change the voltage to 3.3V and return quickly. - */ ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); - if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) { + + switch (ios->signal_voltage) { + case MMC_SIGNAL_VOLTAGE_330: /* Set 1.8V Signal Enable in the Host Control2 register to 0 */ ctrl &= ~SDHCI_CTRL_VDD_180; sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); + if (host->vqmmc) { + ret = regulator_set_voltage(host->vqmmc, 2700000, 3600000); + if (ret) { + pr_warning("%s: Switching to 3.3V signalling voltage " + " failed\n", mmc_hostname(host->mmc)); + return -EIO; + } + } /* Wait for 5ms */ usleep_range(5000, 5500); @@ -1609,72 +1740,55 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host, ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); if (!(ctrl & SDHCI_CTRL_VDD_180)) return 0; - else { - pr_info(DRIVER_NAME ": Switching to 3.3V " - "signalling voltage failed\n"); - return -EIO; - } - } else if (!(ctrl & SDHCI_CTRL_VDD_180) && - (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180)) { - /* Stop SDCLK */ - clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); - clk &= ~SDHCI_CLOCK_CARD_EN; - sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); - /* Check whether DAT[3:0] is 0000 */ - present_state = sdhci_readl(host, SDHCI_PRESENT_STATE); - if (!((present_state & SDHCI_DATA_LVL_MASK) >> - SDHCI_DATA_LVL_SHIFT)) { - /* - * Enable 1.8V Signal Enable in the Host Control2 - * register - */ - ctrl |= SDHCI_CTRL_VDD_180; - sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); - - /* Wait for 5ms */ - usleep_range(5000, 5500); + pr_warning("%s: 3.3V regulator output did not became stable\n", + mmc_hostname(host->mmc)); - ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); - if (ctrl & SDHCI_CTRL_VDD_180) { - /* Provide SDCLK again and wait for 1ms*/ - clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); - clk |= SDHCI_CLOCK_CARD_EN; - sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); - usleep_range(1000, 1500); - - /* - * If DAT[3:0] level is 1111b, then the card - * was successfully switched to 1.8V signaling. - */ - present_state = sdhci_readl(host, - SDHCI_PRESENT_STATE); - if ((present_state & SDHCI_DATA_LVL_MASK) == - SDHCI_DATA_LVL_MASK) - return 0; + return -EAGAIN; + case MMC_SIGNAL_VOLTAGE_180: + if (host->vqmmc) { + ret = regulator_set_voltage(host->vqmmc, + 1700000, 1950000); + if (ret) { + pr_warning("%s: Switching to 1.8V signalling voltage " + " failed\n", mmc_hostname(host->mmc)); + return -EIO; } } /* - * If we are here, that means the switch to 1.8V signaling - * failed. We power cycle the card, and retry initialization - * sequence by setting S18R to 0. + * Enable 1.8V Signal Enable in the Host Control2 + * register */ - pwr = sdhci_readb(host, SDHCI_POWER_CONTROL); - pwr &= ~SDHCI_POWER_ON; - sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); + ctrl |= SDHCI_CTRL_VDD_180; + sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); - /* Wait for 1ms as per the spec */ - usleep_range(1000, 1500); - pwr |= SDHCI_POWER_ON; - sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); + /* Wait for 5ms */ + usleep_range(5000, 5500); + + /* 1.8V regulator output should be stable within 5 ms */ + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + if (ctrl & SDHCI_CTRL_VDD_180) + return 0; + + pr_warning("%s: 1.8V regulator output did not became stable\n", + mmc_hostname(host->mmc)); - pr_info(DRIVER_NAME ": Switching to 1.8V signalling " - "voltage failed, retrying with S18R set to 0\n"); return -EAGAIN; - } else + case MMC_SIGNAL_VOLTAGE_120: + if (host->vqmmc) { + ret = regulator_set_voltage(host->vqmmc, 1100000, 1300000); + if (ret) { + pr_warning("%s: Switching to 1.2V signalling voltage " + " failed\n", mmc_hostname(host->mmc)); + return -EIO; + } + } + return 0; + default: /* No signal voltage switch required */ return 0; + } } static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc, @@ -1691,23 +1805,29 @@ static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc, return err; } +static int sdhci_card_busy(struct mmc_host *mmc) +{ + struct sdhci_host *host = mmc_priv(mmc); + u32 present_state; + + sdhci_runtime_pm_get(host); + /* Check whether DAT[3:0] is 0000 */ + present_state = sdhci_readl(host, SDHCI_PRESENT_STATE); + sdhci_runtime_pm_put(host); + + return !(present_state & SDHCI_DATA_LVL_MASK); +} + static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) { - struct sdhci_host *host; + struct sdhci_host *host = mmc_priv(mmc); u16 ctrl; - u32 ier; int tuning_loop_counter = MAX_TUNING_LOOP; - unsigned long timeout; int err = 0; - bool requires_tuning_nonuhs = false; - - host = mmc_priv(mmc); + unsigned long flags; sdhci_runtime_pm_get(host); - disable_irq(host->irq); - spin_lock(&host->lock); - - ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + spin_lock_irqsave(&host->lock, flags); /* * The Host Controller needs tuning only in case of SDR104 mode @@ -1716,21 +1836,32 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) * If the Host Controller supports the HS200 mode then the * tuning function has to be executed. */ - if (((ctrl & SDHCI_CTRL_UHS_MASK) == SDHCI_CTRL_UHS_SDR50) && - (host->flags & SDHCI_SDR50_NEEDS_TUNING || - host->flags & SDHCI_HS200_NEEDS_TUNING)) - requires_tuning_nonuhs = true; - - if (((ctrl & SDHCI_CTRL_UHS_MASK) == SDHCI_CTRL_UHS_SDR104) || - requires_tuning_nonuhs) - ctrl |= SDHCI_CTRL_EXEC_TUNING; - else { - spin_unlock(&host->lock); - enable_irq(host->irq); + switch (host->timing) { + case MMC_TIMING_MMC_HS200: + case MMC_TIMING_UHS_SDR104: + break; + + case MMC_TIMING_UHS_SDR50: + if (host->flags & SDHCI_SDR50_NEEDS_TUNING || + host->flags & SDHCI_SDR104_NEEDS_TUNING) + break; + /* FALLTHROUGH */ + + default: + spin_unlock_irqrestore(&host->lock, flags); sdhci_runtime_pm_put(host); return 0; } + if (host->ops->platform_execute_tuning) { + spin_unlock_irqrestore(&host->lock, flags); + err = host->ops->platform_execute_tuning(host, opcode); + sdhci_runtime_pm_put(host); + return err; + } + + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + ctrl |= SDHCI_CTRL_EXEC_TUNING; sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); /* @@ -1743,21 +1874,17 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) * to make sure we don't hit a controller bug, we _only_ * enable Buffer Read Ready interrupt here. */ - ier = sdhci_readl(host, SDHCI_INT_ENABLE); - sdhci_clear_set_irqs(host, ier, SDHCI_INT_DATA_AVAIL); + sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_INT_ENABLE); + sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_SIGNAL_ENABLE); /* * Issue CMD19 repeatedly till Execute Tuning is set to 0 or the number * of loops reaches 40 times or a timeout of 150ms occurs. */ - timeout = 150; do { struct mmc_command cmd = {0}; struct mmc_request mrq = {NULL}; - if (!tuning_loop_counter && !timeout) - break; - cmd.opcode = opcode; cmd.arg = 0; cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; @@ -1765,6 +1892,9 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) cmd.data = NULL; cmd.error = 0; + if (tuning_loop_counter-- == 0) + break; + mrq.cmd = &cmd; host->mrq = &mrq; @@ -1798,15 +1928,12 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) host->cmd = NULL; host->mrq = NULL; - spin_unlock(&host->lock); - enable_irq(host->irq); - + spin_unlock_irqrestore(&host->lock, flags); /* Wait for Buffer Read Ready interrupt */ wait_event_interruptible_timeout(host->buf_ready_int, (host->tuning_done == 1), msecs_to_jiffies(50)); - disable_irq(host->irq); - spin_lock(&host->lock); + spin_lock_irqsave(&host->lock, flags); if (!host->tuning_done) { pr_info(DRIVER_NAME ": Timeout waiting for " @@ -1825,25 +1952,25 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) host->tuning_done = 0; ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); - tuning_loop_counter--; - timeout--; - mdelay(1); + + /* eMMC spec does not require a delay between tuning cycles */ + if (opcode == MMC_SEND_TUNING_BLOCK) + mdelay(1); } while (ctrl & SDHCI_CTRL_EXEC_TUNING); /* * The Host Driver has exhausted the maximum number of loops allowed, * so use fixed sampling frequency. */ - if (!tuning_loop_counter || !timeout) { + if (tuning_loop_counter < 0) { ctrl &= ~SDHCI_CTRL_TUNED_CLK; sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); - } else { - if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) { - pr_info(DRIVER_NAME ": Tuning procedure" - " failed, falling back to fixed sampling" - " clock\n"); - err = -EIO; - } + } + if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) { + pr_info(DRIVER_NAME ": Tuning procedure" + " failed, falling back to fixed sampling" + " clock\n"); + err = -EIO; } out: @@ -1855,16 +1982,16 @@ out: */ if (!(host->flags & SDHCI_NEEDS_RETUNING) && host->tuning_count && (host->tuning_mode == SDHCI_TUNING_MODE_1)) { + host->flags |= SDHCI_USING_RETUNING_TIMER; mod_timer(&host->tuning_timer, jiffies + host->tuning_count * HZ); /* Tuning mode 1 limits the maximum data length to 4MB */ mmc->max_blk_count = (4 * 1024 * 1024) / mmc->max_blk_size; - } else { + } else if (host->flags & SDHCI_USING_RETUNING_TIMER) { host->flags &= ~SDHCI_NEEDS_RETUNING; /* Reload the new initial value for timer */ - if (host->tuning_mode == SDHCI_TUNING_MODE_1) - mod_timer(&host->tuning_timer, jiffies + - host->tuning_count * HZ); + mod_timer(&host->tuning_timer, jiffies + + host->tuning_count * HZ); } /* @@ -1872,105 +1999,97 @@ out: * try tuning again at a later time, when the re-tuning timer expires. * So for these controllers, we return 0. Since there might be other * controllers who do not have this capability, we return error for - * them. + * them. SDHCI_USING_RETUNING_TIMER means the host is currently using + * a retuning timer to do the retuning for the card. */ - if (err && host->tuning_count && - host->tuning_mode == SDHCI_TUNING_MODE_1) + if (err && (host->flags & SDHCI_USING_RETUNING_TIMER)) err = 0; - sdhci_clear_set_irqs(host, SDHCI_INT_DATA_AVAIL, ier); - spin_unlock(&host->lock); - enable_irq(host->irq); + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); + spin_unlock_irqrestore(&host->lock, flags); sdhci_runtime_pm_put(host); return err; } -static void sdhci_do_enable_preset_value(struct sdhci_host *host, bool enable) -{ - u16 ctrl; - unsigned long flags; +static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable) +{ /* Host Controller v3.00 defines preset value registers */ if (host->version < SDHCI_SPEC_300) return; - spin_lock_irqsave(&host->lock, flags); - - ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); - /* * We only enable or disable Preset Value if they are not already * enabled or disabled respectively. Otherwise, we bail out. */ - if (enable && !(ctrl & SDHCI_CTRL_PRESET_VAL_ENABLE)) { - ctrl |= SDHCI_CTRL_PRESET_VAL_ENABLE; - sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); - host->flags |= SDHCI_PV_ENABLED; - } else if (!enable && (ctrl & SDHCI_CTRL_PRESET_VAL_ENABLE)) { - ctrl &= ~SDHCI_CTRL_PRESET_VAL_ENABLE; - sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); - host->flags &= ~SDHCI_PV_ENABLED; - } + if (host->preset_enabled != enable) { + u16 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); - spin_unlock_irqrestore(&host->lock, flags); -} - -static void sdhci_enable_preset_value(struct mmc_host *mmc, bool enable) -{ - struct sdhci_host *host = mmc_priv(mmc); + if (enable) + ctrl |= SDHCI_CTRL_PRESET_VAL_ENABLE; + else + ctrl &= ~SDHCI_CTRL_PRESET_VAL_ENABLE; - sdhci_runtime_pm_get(host); - sdhci_do_enable_preset_value(host, enable); - sdhci_runtime_pm_put(host); -} + sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); -static const struct mmc_host_ops sdhci_ops = { - .request = sdhci_request, - .set_ios = sdhci_set_ios, - .get_ro = sdhci_get_ro, - .hw_reset = sdhci_hw_reset, - .enable_sdio_irq = sdhci_enable_sdio_irq, - .start_signal_voltage_switch = sdhci_start_signal_voltage_switch, - .execute_tuning = sdhci_execute_tuning, - .enable_preset_value = sdhci_enable_preset_value, -}; + if (enable) + host->flags |= SDHCI_PV_ENABLED; + else + host->flags &= ~SDHCI_PV_ENABLED; -/*****************************************************************************\ - * * - * Tasklets * - * * -\*****************************************************************************/ + host->preset_enabled = enable; + } +} -static void sdhci_tasklet_card(unsigned long param) +static void sdhci_card_event(struct mmc_host *mmc) { - struct sdhci_host *host; + struct sdhci_host *host = mmc_priv(mmc); unsigned long flags; - host = (struct sdhci_host*)param; + /* First check if client has provided their own card event */ + if (host->ops->card_event) + host->ops->card_event(host); spin_lock_irqsave(&host->lock, flags); /* Check host->mrq first in case we are runtime suspended */ - if (host->mrq && - !(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) { + if (host->mrq && !sdhci_do_get_cd(host)) { pr_err("%s: Card removed during transfer!\n", mmc_hostname(host->mmc)); pr_err("%s: Resetting controller.\n", mmc_hostname(host->mmc)); - sdhci_reset(host, SDHCI_RESET_CMD); - sdhci_reset(host, SDHCI_RESET_DATA); + sdhci_do_reset(host, SDHCI_RESET_CMD); + sdhci_do_reset(host, SDHCI_RESET_DATA); host->mrq->cmd->error = -ENOMEDIUM; tasklet_schedule(&host->finish_tasklet); } spin_unlock_irqrestore(&host->lock, flags); - - mmc_detect_change(host->mmc, msecs_to_jiffies(200)); } +static const struct mmc_host_ops sdhci_ops = { + .request = sdhci_request, + .set_ios = sdhci_set_ios, + .get_cd = sdhci_get_cd, + .get_ro = sdhci_get_ro, + .hw_reset = sdhci_hw_reset, + .enable_sdio_irq = sdhci_enable_sdio_irq, + .start_signal_voltage_switch = sdhci_start_signal_voltage_switch, + .execute_tuning = sdhci_execute_tuning, + .card_event = sdhci_card_event, + .card_busy = sdhci_card_busy, +}; + +/*****************************************************************************\ + * * + * Tasklets * + * * +\*****************************************************************************/ + static void sdhci_tasklet_finish(unsigned long param) { struct sdhci_host *host; @@ -2005,19 +2124,14 @@ static void sdhci_tasklet_finish(unsigned long param) (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) { /* Some controllers need this kick or reset won't work here */ - if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) { - unsigned int clock; - + if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) /* This is to force an update */ - clock = host->clock; - host->clock = 0; - sdhci_set_clock(host, clock); - } + host->ops->set_clock(host, host->clock); /* Spec says we should do both at the same time, but Ricoh controllers do not like that. */ - sdhci_reset(host, SDHCI_RESET_CMD); - sdhci_reset(host, SDHCI_RESET_DATA); + sdhci_do_reset(host, SDHCI_RESET_CMD); + sdhci_do_reset(host, SDHCI_RESET_DATA); } host->mrq = NULL; @@ -2213,6 +2327,8 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) pr_err("%s: ADMA error\n", mmc_hostname(host->mmc)); sdhci_show_adma_error(host); host->data->error = -EIO; + if (host->ops->adma_workaround) + host->ops->adma_workaround(host, intmask); } if (host->data->error) @@ -2265,105 +2381,132 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) static irqreturn_t sdhci_irq(int irq, void *dev_id) { - irqreturn_t result; + irqreturn_t result = IRQ_NONE; struct sdhci_host *host = dev_id; - u32 intmask; - int cardint = 0; + u32 intmask, mask, unexpected = 0; + int max_loops = 16; spin_lock(&host->lock); - if (host->runtime_suspended) { + if (host->runtime_suspended && !sdhci_sdio_irq_enabled(host)) { spin_unlock(&host->lock); - pr_warning("%s: got irq while runtime suspended\n", - mmc_hostname(host->mmc)); - return IRQ_HANDLED; + return IRQ_NONE; } intmask = sdhci_readl(host, SDHCI_INT_STATUS); - if (!intmask || intmask == 0xffffffff) { result = IRQ_NONE; goto out; } - DBG("*** %s got interrupt: 0x%08x\n", - mmc_hostname(host->mmc), intmask); + do { + /* Clear selected interrupts. */ + mask = intmask & (SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK | + SDHCI_INT_BUS_POWER); + sdhci_writel(host, mask, SDHCI_INT_STATUS); - if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) { - u32 present = sdhci_readl(host, SDHCI_PRESENT_STATE) & - SDHCI_CARD_PRESENT; + DBG("*** %s got interrupt: 0x%08x\n", + mmc_hostname(host->mmc), intmask); - /* - * There is a observation on i.mx esdhc. INSERT bit will be - * immediately set again when it gets cleared, if a card is - * inserted. We have to mask the irq to prevent interrupt - * storm which will freeze the system. And the REMOVE gets - * the same situation. - * - * More testing are needed here to ensure it works for other - * platforms though. - */ - sdhci_mask_irqs(host, present ? SDHCI_INT_CARD_INSERT : - SDHCI_INT_CARD_REMOVE); - sdhci_unmask_irqs(host, present ? SDHCI_INT_CARD_REMOVE : - SDHCI_INT_CARD_INSERT); + if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) { + u32 present = sdhci_readl(host, SDHCI_PRESENT_STATE) & + SDHCI_CARD_PRESENT; - sdhci_writel(host, intmask & (SDHCI_INT_CARD_INSERT | - SDHCI_INT_CARD_REMOVE), SDHCI_INT_STATUS); - intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE); - tasklet_schedule(&host->card_tasklet); - } + /* + * There is a observation on i.mx esdhc. INSERT + * bit will be immediately set again when it gets + * cleared, if a card is inserted. We have to mask + * the irq to prevent interrupt storm which will + * freeze the system. And the REMOVE gets the + * same situation. + * + * More testing are needed here to ensure it works + * for other platforms though. + */ + host->ier &= ~(SDHCI_INT_CARD_INSERT | + SDHCI_INT_CARD_REMOVE); + host->ier |= present ? SDHCI_INT_CARD_REMOVE : + SDHCI_INT_CARD_INSERT; + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); + + sdhci_writel(host, intmask & (SDHCI_INT_CARD_INSERT | + SDHCI_INT_CARD_REMOVE), SDHCI_INT_STATUS); + + host->thread_isr |= intmask & (SDHCI_INT_CARD_INSERT | + SDHCI_INT_CARD_REMOVE); + result = IRQ_WAKE_THREAD; + } - if (intmask & SDHCI_INT_CMD_MASK) { - sdhci_writel(host, intmask & SDHCI_INT_CMD_MASK, - SDHCI_INT_STATUS); - sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK); - } + if (intmask & SDHCI_INT_CMD_MASK) + sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK); - if (intmask & SDHCI_INT_DATA_MASK) { - sdhci_writel(host, intmask & SDHCI_INT_DATA_MASK, - SDHCI_INT_STATUS); - sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK); - } + if (intmask & SDHCI_INT_DATA_MASK) + sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK); - intmask &= ~(SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK); + if (intmask & SDHCI_INT_BUS_POWER) + pr_err("%s: Card is consuming too much power!\n", + mmc_hostname(host->mmc)); - intmask &= ~SDHCI_INT_ERROR; + if (intmask & SDHCI_INT_CARD_INT) { + sdhci_enable_sdio_irq_nolock(host, false); + host->thread_isr |= SDHCI_INT_CARD_INT; + result = IRQ_WAKE_THREAD; + } - if (intmask & SDHCI_INT_BUS_POWER) { - pr_err("%s: Card is consuming too much power!\n", - mmc_hostname(host->mmc)); - sdhci_writel(host, SDHCI_INT_BUS_POWER, SDHCI_INT_STATUS); - } + intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE | + SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK | + SDHCI_INT_ERROR | SDHCI_INT_BUS_POWER | + SDHCI_INT_CARD_INT); - intmask &= ~SDHCI_INT_BUS_POWER; + if (intmask) { + unexpected |= intmask; + sdhci_writel(host, intmask, SDHCI_INT_STATUS); + } - if (intmask & SDHCI_INT_CARD_INT) - cardint = 1; + if (result == IRQ_NONE) + result = IRQ_HANDLED; - intmask &= ~SDHCI_INT_CARD_INT; + intmask = sdhci_readl(host, SDHCI_INT_STATUS); + } while (intmask && --max_loops); +out: + spin_unlock(&host->lock); - if (intmask) { + if (unexpected) { pr_err("%s: Unexpected interrupt 0x%08x.\n", - mmc_hostname(host->mmc), intmask); + mmc_hostname(host->mmc), unexpected); sdhci_dumpregs(host); - - sdhci_writel(host, intmask, SDHCI_INT_STATUS); } - result = IRQ_HANDLED; + return result; +} - mmiowb(); -out: - spin_unlock(&host->lock); +static irqreturn_t sdhci_thread_irq(int irq, void *dev_id) +{ + struct sdhci_host *host = dev_id; + unsigned long flags; + u32 isr; - /* - * We have to delay this as it calls back into the driver. - */ - if (cardint) - mmc_signal_sdio_irq(host->mmc); + spin_lock_irqsave(&host->lock, flags); + isr = host->thread_isr; + host->thread_isr = 0; + spin_unlock_irqrestore(&host->lock, flags); - return result; + if (isr & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) { + sdhci_card_event(host->mmc); + mmc_detect_change(host->mmc, msecs_to_jiffies(200)); + } + + if (isr & SDHCI_INT_CARD_INT) { + sdio_run_irqs(host->mmc); + + spin_lock_irqsave(&host->lock, flags); + if (host->flags & SDHCI_SDIO_IRQ_ENABLED) + sdhci_enable_sdio_irq_nolock(host, true); + spin_unlock_irqrestore(&host->lock, flags); + } + + return isr ? IRQ_HANDLED : IRQ_NONE; } /*****************************************************************************\ @@ -2373,82 +2516,99 @@ out: \*****************************************************************************/ #ifdef CONFIG_PM +void sdhci_enable_irq_wakeups(struct sdhci_host *host) +{ + u8 val; + u8 mask = SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE + | SDHCI_WAKE_ON_INT; -int sdhci_suspend_host(struct sdhci_host *host) + val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL); + val |= mask ; + /* Avoid fake wake up */ + if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) + val &= ~(SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE); + sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL); +} +EXPORT_SYMBOL_GPL(sdhci_enable_irq_wakeups); + +void sdhci_disable_irq_wakeups(struct sdhci_host *host) { - int ret; - bool has_tuning_timer; + u8 val; + u8 mask = SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE + | SDHCI_WAKE_ON_INT; + val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL); + val &= ~mask; + sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL); +} +EXPORT_SYMBOL_GPL(sdhci_disable_irq_wakeups); + +int sdhci_suspend_host(struct sdhci_host *host) +{ sdhci_disable_card_detection(host); /* Disable tuning since we are suspending */ - has_tuning_timer = host->version >= SDHCI_SPEC_300 && - host->tuning_count && host->tuning_mode == SDHCI_TUNING_MODE_1; - if (has_tuning_timer) { + if (host->flags & SDHCI_USING_RETUNING_TIMER) { del_timer_sync(&host->tuning_timer); host->flags &= ~SDHCI_NEEDS_RETUNING; } - ret = mmc_suspend_host(host->mmc); - if (ret) { - if (has_tuning_timer) { - host->flags |= SDHCI_NEEDS_RETUNING; - mod_timer(&host->tuning_timer, jiffies + - host->tuning_count * HZ); - } - - sdhci_enable_card_detection(host); - - return ret; + if (!device_may_wakeup(mmc_dev(host->mmc))) { + host->ier = 0; + sdhci_writel(host, 0, SDHCI_INT_ENABLE); + sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE); + free_irq(host->irq, host); + } else { + sdhci_enable_irq_wakeups(host); + enable_irq_wake(host->irq); } - - free_irq(host->irq, host); - - return ret; + return 0; } EXPORT_SYMBOL_GPL(sdhci_suspend_host); int sdhci_resume_host(struct sdhci_host *host) { - int ret; + int ret = 0; if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) { if (host->ops->enable_dma) host->ops->enable_dma(host); } - ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED, - mmc_hostname(host->mmc), host); - if (ret) - return ret; + if (!device_may_wakeup(mmc_dev(host->mmc))) { + ret = request_threaded_irq(host->irq, sdhci_irq, + sdhci_thread_irq, IRQF_SHARED, + mmc_hostname(host->mmc), host); + if (ret) + return ret; + } else { + sdhci_disable_irq_wakeups(host); + disable_irq_wake(host->irq); + } - sdhci_init(host, (host->mmc->pm_flags & MMC_PM_KEEP_POWER)); - mmiowb(); + if ((host->mmc->pm_flags & MMC_PM_KEEP_POWER) && + (host->quirks2 & SDHCI_QUIRK2_HOST_OFF_CARD_ON)) { + /* Card keeps power but host controller does not */ + sdhci_init(host, 0); + host->pwr = 0; + host->clock = 0; + sdhci_do_set_ios(host, &host->mmc->ios); + } else { + sdhci_init(host, (host->mmc->pm_flags & MMC_PM_KEEP_POWER)); + mmiowb(); + } - ret = mmc_resume_host(host->mmc); sdhci_enable_card_detection(host); /* Set the re-tuning expiration flag */ - if ((host->version >= SDHCI_SPEC_300) && host->tuning_count && - (host->tuning_mode == SDHCI_TUNING_MODE_1)) + if (host->flags & SDHCI_USING_RETUNING_TIMER) host->flags |= SDHCI_NEEDS_RETUNING; return ret; } EXPORT_SYMBOL_GPL(sdhci_resume_host); - -void sdhci_enable_irq_wakeups(struct sdhci_host *host) -{ - u8 val; - val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL); - val |= SDHCI_WAKE_ON_INT; - sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL); -} - -EXPORT_SYMBOL_GPL(sdhci_enable_irq_wakeups); - #endif /* CONFIG_PM */ #ifdef CONFIG_PM_RUNTIME @@ -2464,23 +2624,40 @@ static int sdhci_runtime_pm_put(struct sdhci_host *host) return pm_runtime_put_autosuspend(host->mmc->parent); } +static void sdhci_runtime_pm_bus_on(struct sdhci_host *host) +{ + if (host->runtime_suspended || host->bus_on) + return; + host->bus_on = true; + pm_runtime_get_noresume(host->mmc->parent); +} + +static void sdhci_runtime_pm_bus_off(struct sdhci_host *host) +{ + if (host->runtime_suspended || !host->bus_on) + return; + host->bus_on = false; + pm_runtime_put_noidle(host->mmc->parent); +} + int sdhci_runtime_suspend_host(struct sdhci_host *host) { unsigned long flags; int ret = 0; /* Disable tuning since we are suspending */ - if (host->version >= SDHCI_SPEC_300 && - host->tuning_mode == SDHCI_TUNING_MODE_1) { + if (host->flags & SDHCI_USING_RETUNING_TIMER) { del_timer_sync(&host->tuning_timer); host->flags &= ~SDHCI_NEEDS_RETUNING; } spin_lock_irqsave(&host->lock, flags); - sdhci_mask_irqs(host, SDHCI_INT_ALL_MASK); + host->ier &= SDHCI_INT_CARD_INT; + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); spin_unlock_irqrestore(&host->lock, flags); - synchronize_irq(host->irq); + synchronize_hardirq(host->irq); spin_lock_irqsave(&host->lock, flags); host->runtime_suspended = true; @@ -2508,12 +2685,15 @@ int sdhci_runtime_resume_host(struct sdhci_host *host) sdhci_do_set_ios(host, &host->mmc->ios); sdhci_do_start_signal_voltage_switch(host, &host->mmc->ios); - if (host_flags & SDHCI_PV_ENABLED) - sdhci_do_enable_preset_value(host, true); + if ((host_flags & SDHCI_PV_ENABLED) && + !(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN)) { + spin_lock_irqsave(&host->lock, flags); + sdhci_enable_preset_value(host, true); + spin_unlock_irqrestore(&host->lock, flags); + } /* Set the re-tuning expiration flag */ - if ((host->version >= SDHCI_SPEC_300) && host->tuning_count && - (host->tuning_mode == SDHCI_TUNING_MODE_1)) + if (host->flags & SDHCI_USING_RETUNING_TIMER) host->flags |= SDHCI_NEEDS_RETUNING; spin_lock_irqsave(&host->lock, flags); @@ -2521,7 +2701,7 @@ int sdhci_runtime_resume_host(struct sdhci_host *host) host->runtime_suspended = false; /* Enable SDIO IRQ */ - if ((host->flags & SDHCI_SDIO_IRQ_ENABLED)) + if (host->flags & SDHCI_SDIO_IRQ_ENABLED) sdhci_enable_sdio_irq_nolock(host, true); /* Enable Card Detection */ @@ -2564,7 +2744,7 @@ EXPORT_SYMBOL_GPL(sdhci_alloc_host); int sdhci_add_host(struct sdhci_host *host) { struct mmc_host *mmc; - u32 caps[2]; + u32 caps[2] = {0, 0}; u32 max_current_caps; unsigned int ocr_avail; int ret; @@ -2580,7 +2760,7 @@ int sdhci_add_host(struct sdhci_host *host) if (debug_quirks2) host->quirks2 = debug_quirks2; - sdhci_reset(host, SDHCI_RESET_ALL); + sdhci_do_reset(host, SDHCI_RESET_ALL); host->version = sdhci_readw(host, SDHCI_HOST_VERSION); host->version = (host->version & SDHCI_SPEC_VER_MASK) @@ -2594,8 +2774,10 @@ int sdhci_add_host(struct sdhci_host *host) caps[0] = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? host->caps : sdhci_readl(host, SDHCI_CAPABILITIES); - caps[1] = (host->version >= SDHCI_SPEC_300) ? - sdhci_readl(host, SDHCI_CAPABILITIES_1) : 0; + if (host->version >= SDHCI_SPEC_300) + caps[1] = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? + host->caps1 : + sdhci_readl(host, SDHCI_CAPABILITIES_1); if (host->quirks & SDHCI_QUIRK_FORCE_DMA) host->flags |= SDHCI_USE_SDMA; @@ -2638,15 +2820,29 @@ int sdhci_add_host(struct sdhci_host *host) * (128) and potentially one alignment transfer for * each of those entries. */ - host->adma_desc = kmalloc((128 * 2 + 1) * 4, GFP_KERNEL); + host->adma_desc = dma_alloc_coherent(mmc_dev(host->mmc), + ADMA_SIZE, &host->adma_addr, + GFP_KERNEL); host->align_buffer = kmalloc(128 * 4, GFP_KERNEL); if (!host->adma_desc || !host->align_buffer) { - kfree(host->adma_desc); + dma_free_coherent(mmc_dev(host->mmc), ADMA_SIZE, + host->adma_desc, host->adma_addr); kfree(host->align_buffer); pr_warning("%s: Unable to allocate ADMA " "buffers. Falling back to standard DMA.\n", mmc_hostname(mmc)); host->flags &= ~SDHCI_USE_ADMA; + host->adma_desc = NULL; + host->align_buffer = NULL; + } else if (host->adma_addr & 3) { + pr_warning("%s: unable to allocate aligned ADMA descriptor\n", + mmc_hostname(mmc)); + host->flags &= ~SDHCI_USE_ADMA; + dma_free_coherent(mmc_dev(host->mmc), ADMA_SIZE, + host->adma_desc, host->adma_addr); + kfree(host->align_buffer); + host->adma_desc = NULL; + host->align_buffer = NULL; } } @@ -2728,9 +2924,10 @@ int sdhci_add_host(struct sdhci_host *host) if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK) host->timeout_clk = mmc->f_max / 1000; - mmc->max_discard_to = (1 << 27) / host->timeout_clk; + mmc->max_busy_timeout = (1 << 27) / host->timeout_clk; mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE | MMC_CAP_CMD23; + mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD; if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12) host->flags |= SDHCI_AUTO_CMD12; @@ -2755,33 +2952,69 @@ int sdhci_add_host(struct sdhci_host *host) if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA)) mmc->caps |= MMC_CAP_4_BIT_DATA; + if (host->quirks2 & SDHCI_QUIRK2_HOST_NO_CMD23) + mmc->caps &= ~MMC_CAP_CMD23; + if (caps[0] & SDHCI_CAN_DO_HISPD) mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED; if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) && - mmc_card_is_removable(mmc)) + !(host->mmc->caps & MMC_CAP_NONREMOVABLE)) mmc->caps |= MMC_CAP_NEEDS_POLL; - /* UHS-I mode(s) supported by the host controller. */ - if (host->version >= SDHCI_SPEC_300) + /* If vqmmc regulator and no 1.8V signalling, then there's no UHS */ + host->vqmmc = regulator_get_optional(mmc_dev(mmc), "vqmmc"); + if (IS_ERR_OR_NULL(host->vqmmc)) { + if (PTR_ERR(host->vqmmc) < 0) { + pr_info("%s: no vqmmc regulator found\n", + mmc_hostname(mmc)); + host->vqmmc = NULL; + } + } else { + ret = regulator_enable(host->vqmmc); + if (!regulator_is_supported_voltage(host->vqmmc, 1700000, + 1950000)) + caps[1] &= ~(SDHCI_SUPPORT_SDR104 | + SDHCI_SUPPORT_SDR50 | + SDHCI_SUPPORT_DDR50); + if (ret) { + pr_warn("%s: Failed to enable vqmmc regulator: %d\n", + mmc_hostname(mmc), ret); + host->vqmmc = NULL; + } + } + + if (host->quirks2 & SDHCI_QUIRK2_NO_1_8_V) + caps[1] &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 | + SDHCI_SUPPORT_DDR50); + + /* Any UHS-I mode in caps implies SDR12 and SDR25 support. */ + if (caps[1] & (SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 | + SDHCI_SUPPORT_DDR50)) mmc->caps |= MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25; /* SDR104 supports also implies SDR50 support */ - if (caps[1] & SDHCI_SUPPORT_SDR104) + if (caps[1] & SDHCI_SUPPORT_SDR104) { mmc->caps |= MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_SDR50; - else if (caps[1] & SDHCI_SUPPORT_SDR50) + /* SD3.0: SDR104 is supported so (for eMMC) the caps2 + * field can be promoted to support HS200. + */ + if (!(host->quirks2 & SDHCI_QUIRK2_BROKEN_HS200)) + mmc->caps2 |= MMC_CAP2_HS200; + } else if (caps[1] & SDHCI_SUPPORT_SDR50) mmc->caps |= MMC_CAP_UHS_SDR50; - if (caps[1] & SDHCI_SUPPORT_DDR50) + if ((caps[1] & SDHCI_SUPPORT_DDR50) && + !(host->quirks2 & SDHCI_QUIRK2_BROKEN_DDR50)) mmc->caps |= MMC_CAP_UHS_DDR50; /* Does the host need tuning for SDR50? */ if (caps[1] & SDHCI_USE_SDR50_TUNING) host->flags |= SDHCI_SDR50_NEEDS_TUNING; - /* Does the host need tuning for HS200? */ + /* Does the host need tuning for SDR104 / HS200? */ if (mmc->caps2 & MMC_CAP2_HS200) - host->flags |= SDHCI_HS200_NEEDS_TUNING; + host->flags |= SDHCI_SDR104_NEEDS_TUNING; /* Driver Type(s) (A, C, D) supported by the host */ if (caps[1] & SDHCI_DRIVER_TYPE_A) @@ -2791,15 +3024,6 @@ int sdhci_add_host(struct sdhci_host *host) if (caps[1] & SDHCI_DRIVER_TYPE_D) mmc->caps |= MMC_CAP_DRIVER_TYPE_D; - /* - * If Power Off Notify capability is enabled by the host, - * set notify to short power off notify timeout value. - */ - if (mmc->caps2 & MMC_CAP2_POWEROFF_NOTIFY) - mmc->power_notify_type = MMC_HOST_PW_NOTIFY_SHORT; - else - mmc->power_notify_type = MMC_HOST_PW_NOTIFY_NONE; - /* Initial value for re-tuning timer count */ host->tuning_count = (caps[1] & SDHCI_RETUNING_TIMER_COUNT_MASK) >> SDHCI_RETUNING_TIMER_COUNT_SHIFT; @@ -2816,6 +3040,35 @@ int sdhci_add_host(struct sdhci_host *host) SDHCI_RETUNING_MODE_SHIFT; ocr_avail = 0; + + host->vmmc = regulator_get_optional(mmc_dev(mmc), "vmmc"); + if (IS_ERR_OR_NULL(host->vmmc)) { + if (PTR_ERR(host->vmmc) < 0) { + pr_info("%s: no vmmc regulator found\n", + mmc_hostname(mmc)); + host->vmmc = NULL; + } + } + +#ifdef CONFIG_REGULATOR + /* + * Voltage range check makes sense only if regulator reports + * any voltage value. + */ + if (host->vmmc && regulator_get_voltage(host->vmmc) > 0) { + ret = regulator_is_supported_voltage(host->vmmc, 2700000, + 3600000); + if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_330))) + caps[0] &= ~SDHCI_CAN_VDD_330; + if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_300))) + caps[0] &= ~SDHCI_CAN_VDD_300; + ret = regulator_is_supported_voltage(host->vmmc, 1700000, + 1950000); + if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_180))) + caps[0] &= ~SDHCI_CAN_VDD_180; + } +#endif /* CONFIG_REGULATOR */ + /* * According to SD Host Controller spec v3.00, if the Host System * can afford more than 150mA, Host Driver should set XPC to 1. Also @@ -2824,57 +3077,50 @@ int sdhci_add_host(struct sdhci_host *host) * value. */ max_current_caps = sdhci_readl(host, SDHCI_MAX_CURRENT); + if (!max_current_caps && host->vmmc) { + u32 curr = regulator_get_current_limit(host->vmmc); + if (curr > 0) { + + /* convert to SDHCI_MAX_CURRENT format */ + curr = curr/1000; /* convert to mA */ + curr = curr/SDHCI_MAX_CURRENT_MULTIPLIER; + + curr = min_t(u32, curr, SDHCI_MAX_CURRENT_LIMIT); + max_current_caps = + (curr << SDHCI_MAX_CURRENT_330_SHIFT) | + (curr << SDHCI_MAX_CURRENT_300_SHIFT) | + (curr << SDHCI_MAX_CURRENT_180_SHIFT); + } + } if (caps[0] & SDHCI_CAN_VDD_330) { - int max_current_330; - ocr_avail |= MMC_VDD_32_33 | MMC_VDD_33_34; - max_current_330 = ((max_current_caps & + mmc->max_current_330 = ((max_current_caps & SDHCI_MAX_CURRENT_330_MASK) >> SDHCI_MAX_CURRENT_330_SHIFT) * SDHCI_MAX_CURRENT_MULTIPLIER; - - if (max_current_330 > 150) - mmc->caps |= MMC_CAP_SET_XPC_330; } if (caps[0] & SDHCI_CAN_VDD_300) { - int max_current_300; - ocr_avail |= MMC_VDD_29_30 | MMC_VDD_30_31; - max_current_300 = ((max_current_caps & + mmc->max_current_300 = ((max_current_caps & SDHCI_MAX_CURRENT_300_MASK) >> SDHCI_MAX_CURRENT_300_SHIFT) * SDHCI_MAX_CURRENT_MULTIPLIER; - - if (max_current_300 > 150) - mmc->caps |= MMC_CAP_SET_XPC_300; } if (caps[0] & SDHCI_CAN_VDD_180) { - int max_current_180; - ocr_avail |= MMC_VDD_165_195; - max_current_180 = ((max_current_caps & + mmc->max_current_180 = ((max_current_caps & SDHCI_MAX_CURRENT_180_MASK) >> SDHCI_MAX_CURRENT_180_SHIFT) * SDHCI_MAX_CURRENT_MULTIPLIER; - - if (max_current_180 > 150) - mmc->caps |= MMC_CAP_SET_XPC_180; - - /* Maximum current capabilities of the host at 1.8V */ - if (max_current_180 >= 800) - mmc->caps |= MMC_CAP_MAX_CURRENT_800; - else if (max_current_180 >= 600) - mmc->caps |= MMC_CAP_MAX_CURRENT_600; - else if (max_current_180 >= 400) - mmc->caps |= MMC_CAP_MAX_CURRENT_400; - else - mmc->caps |= MMC_CAP_MAX_CURRENT_200; } + if (host->ocr_mask) + ocr_avail = host->ocr_mask; + mmc->ocr_avail = ocr_avail; mmc->ocr_avail_sdio = ocr_avail; if (host->ocr_avail_sdio) @@ -2953,8 +3199,6 @@ int sdhci_add_host(struct sdhci_host *host) /* * Init tasklets. */ - tasklet_init(&host->card_tasklet, - sdhci_tasklet_card, (unsigned long)host); tasklet_init(&host->finish_tasklet, sdhci_tasklet_finish, (unsigned long)host); @@ -2969,19 +3213,16 @@ int sdhci_add_host(struct sdhci_host *host) host->tuning_timer.function = sdhci_tuning_timer; } - ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED, - mmc_hostname(mmc), host); - if (ret) - goto untasklet; + sdhci_init(host, 0); - host->vmmc = regulator_get(mmc_dev(mmc), "vmmc"); - if (IS_ERR(host->vmmc)) { - pr_info("%s: no vmmc regulator found\n", mmc_hostname(mmc)); - host->vmmc = NULL; + ret = request_threaded_irq(host->irq, sdhci_irq, sdhci_thread_irq, + IRQF_SHARED, mmc_hostname(mmc), host); + if (ret) { + pr_err("%s: Failed to request IRQ %d: %d\n", + mmc_hostname(mmc), host->irq, ret); + goto untasklet; } - sdhci_init(host, 0); - #ifdef CONFIG_MMC_DEBUG sdhci_dumpregs(host); #endif @@ -2995,8 +3236,11 @@ int sdhci_add_host(struct sdhci_host *host) host->led.brightness_set = sdhci_led_control; ret = led_classdev_register(mmc_dev(mmc), &host->led); - if (ret) + if (ret) { + pr_err("%s: Failed to register LED device: %d\n", + mmc_hostname(mmc), ret); goto reset; + } #endif mmiowb(); @@ -3014,11 +3258,12 @@ int sdhci_add_host(struct sdhci_host *host) #ifdef SDHCI_USE_LEDS_CLASS reset: - sdhci_reset(host, SDHCI_RESET_ALL); + sdhci_do_reset(host, SDHCI_RESET_ALL); + sdhci_writel(host, 0, SDHCI_INT_ENABLE); + sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE); free_irq(host->irq, host); #endif untasklet: - tasklet_kill(&host->card_tasklet); tasklet_kill(&host->finish_tasklet); return ret; @@ -3055,21 +3300,29 @@ void sdhci_remove_host(struct sdhci_host *host, int dead) #endif if (!dead) - sdhci_reset(host, SDHCI_RESET_ALL); + sdhci_do_reset(host, SDHCI_RESET_ALL); + sdhci_writel(host, 0, SDHCI_INT_ENABLE); + sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE); free_irq(host->irq, host); del_timer_sync(&host->timer); - if (host->version >= SDHCI_SPEC_300) - del_timer_sync(&host->tuning_timer); - tasklet_kill(&host->card_tasklet); tasklet_kill(&host->finish_tasklet); - if (host->vmmc) + if (host->vmmc) { + regulator_disable(host->vmmc); regulator_put(host->vmmc); + } + + if (host->vqmmc) { + regulator_disable(host->vqmmc); + regulator_put(host->vqmmc); + } - kfree(host->adma_desc); + if (host->adma_desc) + dma_free_coherent(mmc_dev(host->mmc), ADMA_SIZE, + host->adma_desc, host->adma_addr); kfree(host->align_buffer); host->adma_desc = NULL; |