1 files changed, 776 insertions, 629 deletions

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 7922adb4238..47055f3f01b 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -44,19 +44,23 @@
 
 #define MAX_TUNING_LOOP 40
 
+#define ADMA_SIZE	((128 * 2 + 1) * 4)
+
 static unsigned int debug_quirks = 0;
 static unsigned int debug_quirks2;
 
 static void sdhci_finish_data(struct sdhci_host *);
 
-static void sdhci_send_command(struct sdhci_host *, struct mmc_command *);
 static void sdhci_finish_command(struct sdhci_host *);
 static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
 static void sdhci_tuning_timer(unsigned long data);
+static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
 
 #ifdef CONFIG_PM_RUNTIME
 static int sdhci_runtime_pm_get(struct sdhci_host *host);
 static int sdhci_runtime_pm_put(struct sdhci_host *host);
+static void sdhci_runtime_pm_bus_on(struct sdhci_host *host);
+static void sdhci_runtime_pm_bus_off(struct sdhci_host *host);
 #else
 static inline int sdhci_runtime_pm_get(struct sdhci_host *host)
 {
@@ -66,6 +70,12 @@ static inline int sdhci_runtime_pm_put(struct sdhci_host *host)
 {
 	return 0;
 }
+static void sdhci_runtime_pm_bus_on(struct sdhci_host *host)
+{
+}
+static void sdhci_runtime_pm_bus_off(struct sdhci_host *host)
+{
+}
 #endif
 
 static void sdhci_dumpregs(struct sdhci_host *host)
@@ -123,43 +133,26 @@ static void sdhci_dumpregs(struct sdhci_host *host)
  *                                                                           *
 \*****************************************************************************/
 
-static void sdhci_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set)
-{
-	u32 ier;
-
-	ier = sdhci_readl(host, SDHCI_INT_ENABLE);
-	ier &= ~clear;
-	ier |= set;
-	sdhci_writel(host, ier, SDHCI_INT_ENABLE);
-	sdhci_writel(host, ier, SDHCI_SIGNAL_ENABLE);
-}
-
-static void sdhci_unmask_irqs(struct sdhci_host *host, u32 irqs)
-{
-	sdhci_clear_set_irqs(host, 0, irqs);
-}
-
-static void sdhci_mask_irqs(struct sdhci_host *host, u32 irqs)
-{
-	sdhci_clear_set_irqs(host, irqs, 0);
-}
-
 static void sdhci_set_card_detection(struct sdhci_host *host, bool enable)
 {
-	u32 present, irqs;
+	u32 present;
 
 	if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) ||
 	    (host->mmc->caps & MMC_CAP_NONREMOVABLE))
 		return;
 
-	present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
-			      SDHCI_CARD_PRESENT;
-	irqs = present ? SDHCI_INT_CARD_REMOVE : SDHCI_INT_CARD_INSERT;
+	if (enable) {
+		present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
+				      SDHCI_CARD_PRESENT;
 
-	if (enable)
-		sdhci_unmask_irqs(host, irqs);
-	else
-		sdhci_mask_irqs(host, irqs);
+		host->ier |= present ? SDHCI_INT_CARD_REMOVE :
+				       SDHCI_INT_CARD_INSERT;
+	} else {
+		host->ier &= ~(SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT);
+	}
+
+	sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+	sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
 }
 
 static void sdhci_enable_card_detection(struct sdhci_host *host)
@@ -172,27 +165,18 @@ static void sdhci_disable_card_detection(struct sdhci_host *host)
 	sdhci_set_card_detection(host, false);
 }
 
-static void sdhci_reset(struct sdhci_host *host, u8 mask)
+void sdhci_reset(struct sdhci_host *host, u8 mask)
 {
 	unsigned long timeout;
-	u32 uninitialized_var(ier);
-
-	if (host->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) {
-		if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) &
-			SDHCI_CARD_PRESENT))
-			return;
-	}
-
-	if (host->quirks & SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET)
-		ier = sdhci_readl(host, SDHCI_INT_ENABLE);
-
-	if (host->ops->platform_reset_enter)
-		host->ops->platform_reset_enter(host, mask);
 
 	sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
 
-	if (mask & SDHCI_RESET_ALL)
+	if (mask & SDHCI_RESET_ALL) {
 		host->clock = 0;
+		/* Reset-all turns off SD Bus Power */
+		if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
+			sdhci_runtime_pm_bus_off(host);
+	}
 
 	/* Wait max 100 ms */
 	timeout = 100;
@@ -208,16 +192,27 @@ static void sdhci_reset(struct sdhci_host *host, u8 mask)
 		timeout--;
 		mdelay(1);
 	}
+}
+EXPORT_SYMBOL_GPL(sdhci_reset);
+
+static void sdhci_do_reset(struct sdhci_host *host, u8 mask)
+{
+	if (host->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) {
+		if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) &
+			SDHCI_CARD_PRESENT))
+			return;
+	}
 
-	if (host->ops->platform_reset_exit)
-		host->ops->platform_reset_exit(host, mask);
+	host->ops->reset(host, mask);
 
-	if (host->quirks & SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET)
-		sdhci_clear_set_irqs(host, SDHCI_INT_ALL_MASK, ier);
+	if (mask & SDHCI_RESET_ALL) {
+		if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
+			if (host->ops->enable_dma)
+				host->ops->enable_dma(host);
+		}
 
-	if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
-		if ((host->ops->enable_dma) && (mask & SDHCI_RESET_ALL))
-			host->ops->enable_dma(host);
+		/* Resetting the controller clears many */
+		host->preset_enabled = false;
 	}
 }
 
@@ -226,15 +221,18 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
 static void sdhci_init(struct sdhci_host *host, int soft)
 {
 	if (soft)
-		sdhci_reset(host, SDHCI_RESET_CMD|SDHCI_RESET_DATA);
+		sdhci_do_reset(host, SDHCI_RESET_CMD|SDHCI_RESET_DATA);
 	else
-		sdhci_reset(host, SDHCI_RESET_ALL);
+		sdhci_do_reset(host, SDHCI_RESET_ALL);
 
-	sdhci_clear_set_irqs(host, SDHCI_INT_ALL_MASK,
-		SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT |
-		SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX |
-		SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT |
-		SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE);
+	host->ier = SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT |
+		    SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT |
+		    SDHCI_INT_INDEX | SDHCI_INT_END_BIT | SDHCI_INT_CRC |
+		    SDHCI_INT_TIMEOUT | SDHCI_INT_DATA_END |
+		    SDHCI_INT_RESPONSE;
+
+	sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+	sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
 
 	if (soft) {
 		/* force clock reconfiguration */
@@ -490,11 +488,6 @@ static int sdhci_adma_table_pre(struct sdhci_host *host,
 	else
 		direction = DMA_TO_DEVICE;
 
-	/*
-	 * The ADMA descriptor table is mapped further down as we
-	 * need to fill it with data first.
-	 */
-
 	host->align_addr = dma_map_single(mmc_dev(host->mmc),
 		host->align_buffer, 128 * 4, direction);
 	if (dma_mapping_error(mmc_dev(host->mmc), host->align_addr))
@@ -555,7 +548,7 @@ static int sdhci_adma_table_pre(struct sdhci_host *host,
 		 * If this triggers then we have a calculation bug
 		 * somewhere. :/
 		 */
-		WARN_ON((desc - host->adma_desc) > (128 * 2 + 1) * 4);
+		WARN_ON((desc - host->adma_desc) > ADMA_SIZE);
 	}
 
 	if (host->quirks & SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC) {
@@ -583,17 +576,8 @@ static int sdhci_adma_table_pre(struct sdhci_host *host,
 			host->align_addr, 128 * 4, direction);
 	}
 
-	host->adma_addr = dma_map_single(mmc_dev(host->mmc),
-		host->adma_desc, (128 * 2 + 1) * 4, DMA_TO_DEVICE);
-	if (dma_mapping_error(mmc_dev(host->mmc), host->adma_addr))
-		goto unmap_entries;
-	BUG_ON(host->adma_addr & 0x3);
-
 	return 0;
 
-unmap_entries:
-	dma_unmap_sg(mmc_dev(host->mmc), data->sg,
-		data->sg_len, direction);
 unmap_align:
 	dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
 		128 * 4, direction);
@@ -611,19 +595,25 @@ static void sdhci_adma_table_post(struct sdhci_host *host,
 	u8 *align;
 	char *buffer;
 	unsigned long flags;
+	bool has_unaligned;
 
 	if (data->flags & MMC_DATA_READ)
 		direction = DMA_FROM_DEVICE;
 	else
 		direction = DMA_TO_DEVICE;
 
-	dma_unmap_single(mmc_dev(host->mmc), host->adma_addr,
-		(128 * 2 + 1) * 4, DMA_TO_DEVICE);
-
 	dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
 		128 * 4, direction);
 
-	if (data->flags & MMC_DATA_READ) {
+	/* Do a quick scan of the SG list for any unaligned mappings */
+	has_unaligned = false;
+	for_each_sg(data->sg, sg, host->sg_count, i)
+		if (sg_dma_address(sg) & 3) {
+			has_unaligned = true;
+			break;
+		}
+
+	if (has_unaligned && data->flags & MMC_DATA_READ) {
 		dma_sync_sg_for_cpu(mmc_dev(host->mmc), data->sg,
 			data->sg_len, direction);
 
@@ -663,12 +653,12 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
 		return 0xE;
 
 	/* Unspecified timeout, assume max */
-	if (!data && !cmd->cmd_timeout_ms)
+	if (!data && !cmd->busy_timeout)
 		return 0xE;
 
 	/* timeout in us */
 	if (!data)
-		target_timeout = cmd->cmd_timeout_ms * 1000;
+		target_timeout = cmd->busy_timeout * 1000;
 	else {
 		target_timeout = data->timeout_ns / 1000;
 		if (host->clock)
@@ -709,9 +699,12 @@ static void sdhci_set_transfer_irqs(struct sdhci_host *host)
 	u32 dma_irqs = SDHCI_INT_DMA_END | SDHCI_INT_ADMA_ERROR;
 
 	if (host->flags & SDHCI_REQ_USE_DMA)
-		sdhci_clear_set_irqs(host, pio_irqs, dma_irqs);
+		host->ier = (host->ier & ~pio_irqs) | dma_irqs;
 	else
-		sdhci_clear_set_irqs(host, dma_irqs, pio_irqs);
+		host->ier = (host->ier & ~dma_irqs) | pio_irqs;
+
+	sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+	sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
 }
 
 static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
@@ -886,8 +879,13 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,
 	u16 mode;
 	struct mmc_data *data = cmd->data;
 
-	if (data == NULL)
+	if (data == NULL) {
+		/* clear Auto CMD settings for no data CMDs */
+		mode = sdhci_readw(host, SDHCI_TRANSFER_MODE);
+		sdhci_writew(host, mode & ~(SDHCI_TRNS_AUTO_CMD12 |
+				SDHCI_TRNS_AUTO_CMD23), SDHCI_TRANSFER_MODE);
 		return;
+	}
 
 	WARN_ON(!host->data);
 
@@ -959,8 +957,8 @@ static void sdhci_finish_data(struct sdhci_host *host)
 		 * upon error conditions.
 		 */
 		if (data->error) {
-			sdhci_reset(host, SDHCI_RESET_CMD);
-			sdhci_reset(host, SDHCI_RESET_DATA);
+			sdhci_do_reset(host, SDHCI_RESET_CMD);
+			sdhci_do_reset(host, SDHCI_RESET_DATA);
 		}
 
 		sdhci_send_command(host, data->stop);
@@ -968,7 +966,7 @@ static void sdhci_finish_data(struct sdhci_host *host)
 		tasklet_schedule(&host->finish_tasklet);
 }
 
-static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
+void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 {
 	int flags;
 	u32 mask;
@@ -1001,7 +999,12 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 		mdelay(1);
 	}
 
-	mod_timer(&host->timer, jiffies + 10 * HZ);
+	timeout = jiffies;
+	if (!cmd->data && cmd->busy_timeout > 9000)
+		timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ;
+	else
+		timeout += 10 * HZ;
+	mod_timer(&host->timer, timeout);
 
 	host->cmd = cmd;
 
@@ -1040,6 +1043,7 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 
 	sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND);
 }
+EXPORT_SYMBOL_GPL(sdhci_send_command);
 
 static void sdhci_finish_command(struct sdhci_host *host)
 {
@@ -1082,59 +1086,87 @@ static void sdhci_finish_command(struct sdhci_host *host)
 	}
 }
 
-static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
+static u16 sdhci_get_preset_value(struct sdhci_host *host)
+{
+	u16 preset = 0;
+
+	switch (host->timing) {
+	case MMC_TIMING_UHS_SDR12:
+		preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR12);
+		break;
+	case MMC_TIMING_UHS_SDR25:
+		preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR25);
+		break;
+	case MMC_TIMING_UHS_SDR50:
+		preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR50);
+		break;
+	case MMC_TIMING_UHS_SDR104:
+	case MMC_TIMING_MMC_HS200:
+		preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR104);
+		break;
+	case MMC_TIMING_UHS_DDR50:
+		preset = sdhci_readw(host, SDHCI_PRESET_FOR_DDR50);
+		break;
+	default:
+		pr_warn("%s: Invalid UHS-I mode selected\n",
+			mmc_hostname(host->mmc));
+		preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR12);
+		break;
+	}
+	return preset;
+}
+
+void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 {
 	int div = 0; /* Initialized for compiler warning */
 	int real_div = div, clk_mul = 1;
 	u16 clk = 0;
 	unsigned long timeout;
 
-	if (clock && clock == host->clock)
-		return;
-
 	host->mmc->actual_clock = 0;
 
-	if (host->ops->set_clock) {
-		host->ops->set_clock(host, clock);
-		if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK)
-			return;
-	}
-
 	sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
 
 	if (clock == 0)
-		goto out;
+		return;
 
 	if (host->version >= SDHCI_SPEC_300) {
+		if (host->preset_enabled) {
+			u16 pre_val;
+
+			clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+			pre_val = sdhci_get_preset_value(host);
+			div = (pre_val & SDHCI_PRESET_SDCLK_FREQ_MASK)
+				>> SDHCI_PRESET_SDCLK_FREQ_SHIFT;
+			if (host->clk_mul &&
+				(pre_val & SDHCI_PRESET_CLKGEN_SEL_MASK)) {
+				clk = SDHCI_PROG_CLOCK_MODE;
+				real_div = div + 1;
+				clk_mul = host->clk_mul;
+			} else {
+				real_div = max_t(int, 1, div << 1);
+			}
+			goto clock_set;
+		}
+
 		/*
 		 * Check if the Host Controller supports Programmable Clock
 		 * Mode.
 		 */
 		if (host->clk_mul) {
-			u16 ctrl;
-
+			for (div = 1; div <= 1024; div++) {
+				if ((host->max_clk * host->clk_mul / div)
+					<= clock)
+					break;
+			}
 			/*
-			 * We need to figure out whether the Host Driver needs
-			 * to select Programmable Clock Mode, or the value can
-			 * be set automatically by the Host Controller based on
-			 * the Preset Value registers.
+			 * Set Programmable Clock Mode in the Clock
+			 * Control register.
 			 */
-			ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
-			if (!(ctrl & SDHCI_CTRL_PRESET_VAL_ENABLE)) {
-				for (div = 1; div <= 1024; div++) {
-					if (((host->max_clk * host->clk_mul) /
-					      div) <= clock)
-						break;
-				}
-				/*
-				 * Set Programmable Clock Mode in the Clock
-				 * Control register.
-				 */
-				clk = SDHCI_PROG_CLOCK_MODE;
-				real_div = div;
-				clk_mul = host->clk_mul;
-				div--;
-			}
+			clk = SDHCI_PROG_CLOCK_MODE;
+			real_div = div;
+			clk_mul = host->clk_mul;
+			div--;
 		} else {
 			/* Version 3.00 divisors must be a multiple of 2. */
 			if (host->max_clk <= clock)
@@ -1159,6 +1191,7 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 		div >>= 1;
 	}
 
+clock_set:
 	if (real_div)
 		host->mmc->actual_clock = (host->max_clk * clk_mul) / real_div;
 
@@ -1184,17 +1217,16 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 
 	clk |= SDHCI_CLOCK_CARD_EN;
 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
-
-out:
-	host->clock = clock;
 }
+EXPORT_SYMBOL_GPL(sdhci_set_clock);
 
-static int sdhci_set_power(struct sdhci_host *host, unsigned short power)
+static void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
+			    unsigned short vdd)
 {
 	u8 pwr = 0;
 
-	if (power != (unsigned short)-1) {
-		switch (1 << power) {
+	if (mode != MMC_POWER_OFF) {
+		switch (1 << vdd) {
 		case MMC_VDD_165_195:
 			pwr = SDHCI_POWER_180;
 			break;
@@ -1212,41 +1244,51 @@ static int sdhci_set_power(struct sdhci_host *host, unsigned short power)
 	}
 
 	if (host->pwr == pwr)
-		return -1;
+		return;
 
 	host->pwr = pwr;
 
 	if (pwr == 0) {
 		sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
-		return 0;
-	}
+		if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
+			sdhci_runtime_pm_bus_off(host);
+		vdd = 0;
+	} else {
+		/*
+		 * Spec says that we should clear the power reg before setting
+		 * a new value. Some controllers don't seem to like this though.
+		 */
+		if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
+			sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
 
-	/*
-	 * Spec says that we should clear the power reg before setting
-	 * a new value. Some controllers don't seem to like this though.
-	 */
-	if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
-		sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
+		/*
+		 * At least the Marvell CaFe chip gets confused if we set the
+		 * voltage and set turn on power at the same time, so set the
+		 * voltage first.
+		 */
+		if (host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER)
+			sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
 
-	/*
-	 * At least the Marvell CaFe chip gets confused if we set the voltage
-	 * and set turn on power at the same time, so set the voltage first.
-	 */
-	if (host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER)
-		sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+		pwr |= SDHCI_POWER_ON;
 
-	pwr |= SDHCI_POWER_ON;
+		sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
 
-	sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+		if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
+			sdhci_runtime_pm_bus_on(host);
 
-	/*
-	 * Some controllers need an extra 10ms delay of 10ms before they
-	 * can apply clock after applying power
-	 */
-	if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER)
-		mdelay(10);
+		/*
+		 * Some controllers need an extra 10ms delay of 10ms before
+		 * they can apply clock after applying power
+		 */
+		if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER)
+			mdelay(10);
+	}
 
-	return power;
+	if (host->vmmc) {
+		spin_unlock_irq(&host->lock);
+		mmc_regulator_set_ocr(host->mmc, host->vmmc, vdd);
+		spin_lock_irq(&host->lock);
+	}
 }
 
 /*****************************************************************************\
@@ -1258,7 +1300,7 @@ static int sdhci_set_power(struct sdhci_host *host, unsigned short power)
 static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 {
 	struct sdhci_host *host;
-	bool present;
+	int present;
 	unsigned long flags;
 	u32 tuning_opcode;
 
@@ -1287,18 +1329,21 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 
 	host->mrq = mrq;
 
-	/* If polling, assume that the card is always present. */
-	if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
-		present = true;
-	else
-		present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
-				SDHCI_CARD_PRESENT;
-
-	/* If we're using a cd-gpio, testing the presence bit might fail. */
-	if (!present) {
-		int ret = mmc_gpio_get_cd(host->mmc);
-		if (ret > 0)
-			present = true;
+	/*
+	 * Firstly check card presence from cd-gpio.  The return could
+	 * be one of the following possibilities:
+	 *     negative: cd-gpio is not available
+	 *     zero: cd-gpio is used, and card is removed
+	 *     one: cd-gpio is used, and card is present
+	 */
+	present = mmc_gpio_get_cd(host->mmc);
+	if (present < 0) {
+		/* If polling, assume that the card is always present. */
+		if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
+			present = 1;
+		else
+			present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
+					SDHCI_CARD_PRESENT;
 	}
 
 	if (!present || host->flags & SDHCI_DEVICE_DEAD) {
@@ -1315,16 +1360,26 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 		 */
 		if ((host->flags & SDHCI_NEEDS_RETUNING) &&
 		    !(present_state & (SDHCI_DOING_WRITE | SDHCI_DOING_READ))) {
-			/* eMMC uses cmd21 while sd and sdio use cmd19 */
-			tuning_opcode = mmc->card->type == MMC_TYPE_MMC ?
-				MMC_SEND_TUNING_BLOCK_HS200 :
-				MMC_SEND_TUNING_BLOCK;
-			spin_unlock_irqrestore(&host->lock, flags);
-			sdhci_execute_tuning(mmc, tuning_opcode);
-			spin_lock_irqsave(&host->lock, flags);
-
-			/* Restore original mmc_request structure */
-			host->mrq = mrq;
+			if (mmc->card) {
+				/* eMMC uses cmd21 but sd and sdio use cmd19 */
+				tuning_opcode =
+					mmc->card->type == MMC_TYPE_MMC ?
+					MMC_SEND_TUNING_BLOCK_HS200 :
+					MMC_SEND_TUNING_BLOCK;
+
+				/* Here we need to set the host->mrq to NULL,
+				 * in case the pending finish_tasklet
+				 * finishes it incorrectly.
+				 */
+				host->mrq = NULL;
+
+				spin_unlock_irqrestore(&host->lock, flags);
+				sdhci_execute_tuning(mmc, tuning_opcode);
+				spin_lock_irqsave(&host->lock, flags);
+
+				/* Restore original mmc_request structure */
+				host->mrq = mrq;
+			}
 		}
 
 		if (mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23))
@@ -1337,10 +1392,53 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 	spin_unlock_irqrestore(&host->lock, flags);
 }
 
+void sdhci_set_bus_width(struct sdhci_host *host, int width)
+{
+	u8 ctrl;
+
+	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+	if (width == MMC_BUS_WIDTH_8) {
+		ctrl &= ~SDHCI_CTRL_4BITBUS;
+		if (host->version >= SDHCI_SPEC_300)
+			ctrl |= SDHCI_CTRL_8BITBUS;
+	} else {
+		if (host->version >= SDHCI_SPEC_300)
+			ctrl &= ~SDHCI_CTRL_8BITBUS;
+		if (width == MMC_BUS_WIDTH_4)
+			ctrl |= SDHCI_CTRL_4BITBUS;
+		else
+			ctrl &= ~SDHCI_CTRL_4BITBUS;
+	}
+	sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+}
+EXPORT_SYMBOL_GPL(sdhci_set_bus_width);
+
+void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing)
+{
+	u16 ctrl_2;
+
+	ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+	/* Select Bus Speed Mode for host */
+	ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
+	if ((timing == MMC_TIMING_MMC_HS200) ||
+	    (timing == MMC_TIMING_UHS_SDR104))
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
+	else if (timing == MMC_TIMING_UHS_SDR12)
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
+	else if (timing == MMC_TIMING_UHS_SDR25)
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
+	else if (timing == MMC_TIMING_UHS_SDR50)
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
+	else if ((timing == MMC_TIMING_UHS_DDR50) ||
+		 (timing == MMC_TIMING_MMC_DDR52))
+		ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
+	sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+}
+EXPORT_SYMBOL_GPL(sdhci_set_uhs_signaling);
+
 static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
 {
 	unsigned long flags;
-	int vdd_bit = -1;
 	u8 ctrl;
 
 	spin_lock_irqsave(&host->lock, flags);
@@ -1361,45 +1459,22 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
 		sdhci_reinit(host);
 	}
 
-	sdhci_set_clock(host, ios->clock);
+	if (host->version >= SDHCI_SPEC_300 &&
+		(ios->power_mode == MMC_POWER_UP) &&
+		!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN))
+		sdhci_enable_preset_value(host, false);
 
-	if (ios->power_mode == MMC_POWER_OFF)
-		vdd_bit = sdhci_set_power(host, -1);
-	else
-		vdd_bit = sdhci_set_power(host, ios->vdd);
-
-	if (host->vmmc && vdd_bit != -1) {
-		spin_unlock_irqrestore(&host->lock, flags);
-		mmc_regulator_set_ocr(host->mmc, host->vmmc, vdd_bit);
-		spin_lock_irqsave(&host->lock, flags);
+	if (!ios->clock || ios->clock != host->clock) {
+		host->ops->set_clock(host, ios->clock);
+		host->clock = ios->clock;
 	}
 
+	sdhci_set_power(host, ios->power_mode, ios->vdd);
+
 	if (host->ops->platform_send_init_74_clocks)
 		host->ops->platform_send_init_74_clocks(host, ios->power_mode);
 
-	/*
-	 * If your platform has 8-bit width support but is not a v3 controller,
-	 * or if it requires special setup code, you should implement that in
-	 * platform_8bit_width().
-	 */
-	if (host->ops->platform_8bit_width)
-		host->ops->platform_8bit_width(host, ios->bus_width);
-	else {
-		ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
-		if (ios->bus_width == MMC_BUS_WIDTH_8) {
-			ctrl &= ~SDHCI_CTRL_4BITBUS;
-			if (host->version >= SDHCI_SPEC_300)
-				ctrl |= SDHCI_CTRL_8BITBUS;
-		} else {
-			if (host->version >= SDHCI_SPEC_300)
-				ctrl &= ~SDHCI_CTRL_8BITBUS;
-			if (ios->bus_width == MMC_BUS_WIDTH_4)
-				ctrl |= SDHCI_CTRL_4BITBUS;
-			else
-				ctrl &= ~SDHCI_CTRL_4BITBUS;
-		}
-		sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
-	}
+	host->ops->set_bus_width(host, ios->bus_width);
 
 	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
 
@@ -1412,23 +1487,23 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
 
 	if (host->version >= SDHCI_SPEC_300) {
 		u16 clk, ctrl_2;
-		unsigned int clock;
 
 		/* In case of UHS-I modes, set High Speed Enable */
 		if ((ios->timing == MMC_TIMING_MMC_HS200) ||
+		    (ios->timing == MMC_TIMING_MMC_DDR52) ||
 		    (ios->timing == MMC_TIMING_UHS_SDR50) ||
 		    (ios->timing == MMC_TIMING_UHS_SDR104) ||
 		    (ios->timing == MMC_TIMING_UHS_DDR50) ||
 		    (ios->timing == MMC_TIMING_UHS_SDR25))
 			ctrl |= SDHCI_CTRL_HISPD;
 
-		ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
-		if (!(ctrl_2 & SDHCI_CTRL_PRESET_VAL_ENABLE)) {
+		if (!host->preset_enabled) {
 			sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
 			/*
 			 * We only need to set Driver Strength if the
 			 * preset value enable is not set.
 			 */
+			ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
 			ctrl_2 &= ~SDHCI_CTRL_DRV_TYPE_MASK;
 			if (ios->drv_type == MMC_SET_DRIVER_TYPE_A)
 				ctrl_2 |= SDHCI_CTRL_DRV_TYPE_A;
@@ -1452,9 +1527,7 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
 			sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
 
 			/* Re-enable SD Clock */
-			clock = host->clock;
-			host->clock = 0;
-			sdhci_set_clock(host, clock);
+			host->ops->set_clock(host, host->clock);
 		}
 
 
@@ -1463,31 +1536,25 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
 		clk &= ~SDHCI_CLOCK_CARD_EN;
 		sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
 
-		if (host->ops->set_uhs_signaling)
-			host->ops->set_uhs_signaling(host, ios->timing);
-		else {
-			ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
-			/* Select Bus Speed Mode for host */
-			ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
-			if (ios->timing == MMC_TIMING_MMC_HS200)
-				ctrl_2 |= SDHCI_CTRL_HS_SDR200;
-			else if (ios->timing == MMC_TIMING_UHS_SDR12)
-				ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
-			else if (ios->timing == MMC_TIMING_UHS_SDR25)
-				ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
-			else if (ios->timing == MMC_TIMING_UHS_SDR50)
-				ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
-			else if (ios->timing == MMC_TIMING_UHS_SDR104)
-				ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
-			else if (ios->timing == MMC_TIMING_UHS_DDR50)
-				ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
-			sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+		host->ops->set_uhs_signaling(host, ios->timing);
+		host->timing = ios->timing;
+
+		if (!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN) &&
+				((ios->timing == MMC_TIMING_UHS_SDR12) ||
+				 (ios->timing == MMC_TIMING_UHS_SDR25) ||
+				 (ios->timing == MMC_TIMING_UHS_SDR50) ||
+				 (ios->timing == MMC_TIMING_UHS_SDR104) ||
+				 (ios->timing == MMC_TIMING_UHS_DDR50))) {
+			u16 preset;
+
+			sdhci_enable_preset_value(host, true);
+			preset = sdhci_get_preset_value(host);
+			ios->drv_type = (preset & SDHCI_PRESET_DRV_MASK)
+				>> SDHCI_PRESET_DRV_SHIFT;
 		}
 
 		/* Re-enable SD Clock */
-		clock = host->clock;
-		host->clock = 0;
-		sdhci_set_clock(host, clock);
+		host->ops->set_clock(host, host->clock);
 	} else
 		sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
 
@@ -1497,7 +1564,7 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
 	 * it on each ios seems to solve the problem.
 	 */
 	if(host->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS)
-		sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
+		sdhci_do_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
 
 	mmiowb();
 	spin_unlock_irqrestore(&host->lock, flags);
@@ -1512,6 +1579,37 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	sdhci_runtime_pm_put(host);
 }
 
+static int sdhci_do_get_cd(struct sdhci_host *host)
+{
+	int gpio_cd = mmc_gpio_get_cd(host->mmc);
+
+	if (host->flags & SDHCI_DEVICE_DEAD)
+		return 0;
+
+	/* If polling/nonremovable, assume that the card is always present. */
+	if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) ||
+	    (host->mmc->caps & MMC_CAP_NONREMOVABLE))
+		return 1;
+
+	/* Try slot gpio detect */
+	if (!IS_ERR_VALUE(gpio_cd))
+		return !!gpio_cd;
+
+	/* Host native card detect */
+	return !!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT);
+}
+
+static int sdhci_get_cd(struct mmc_host *mmc)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	int ret;
+
+	sdhci_runtime_pm_get(host);
+	ret = sdhci_do_get_cd(host);
+	sdhci_runtime_pm_put(host);
+	return ret;
+}
+
 static int sdhci_check_ro(struct sdhci_host *host)
 {
 	unsigned long flags;
@@ -1575,24 +1673,16 @@ static int sdhci_get_ro(struct mmc_host *mmc)
 
 static void sdhci_enable_sdio_irq_nolock(struct sdhci_host *host, int enable)
 {
-	if (host->flags & SDHCI_DEVICE_DEAD)
-		goto out;
-
-	if (enable)
-		host->flags |= SDHCI_SDIO_IRQ_ENABLED;
-	else
-		host->flags &= ~SDHCI_SDIO_IRQ_ENABLED;
-
-	/* SDIO IRQ will be enabled as appropriate in runtime resume */
-	if (host->runtime_suspended)
-		goto out;
+	if (!(host->flags & SDHCI_DEVICE_DEAD)) {
+		if (enable)
+			host->ier |= SDHCI_INT_CARD_INT;
+		else
+			host->ier &= ~SDHCI_INT_CARD_INT;
 
-	if (enable)
-		sdhci_unmask_irqs(host, SDHCI_INT_CARD_INT);
-	else
-		sdhci_mask_irqs(host, SDHCI_INT_CARD_INT);
-out:
-	mmiowb();
+		sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+		sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
+		mmiowb();
+	}
 }
 
 static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
@@ -1600,146 +1690,105 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
 	struct sdhci_host *host = mmc_priv(mmc);
 	unsigned long flags;
 
+	sdhci_runtime_pm_get(host);
+
 	spin_lock_irqsave(&host->lock, flags);
+	if (enable)
+		host->flags |= SDHCI_SDIO_IRQ_ENABLED;
+	else
+		host->flags &= ~SDHCI_SDIO_IRQ_ENABLED;
+
 	sdhci_enable_sdio_irq_nolock(host, enable);
 	spin_unlock_irqrestore(&host->lock, flags);
+
+	sdhci_runtime_pm_put(host);
 }
 
-static int sdhci_do_3_3v_signal_voltage_switch(struct sdhci_host *host,
-						u16 ctrl)
+static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
+						struct mmc_ios *ios)
 {
+	u16 ctrl;
 	int ret;
 
-	/* Set 1.8V Signal Enable in the Host Control2 register to 0 */
-	ctrl &= ~SDHCI_CTRL_VDD_180;
-	sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
-
-	if (host->vqmmc) {
-		ret = regulator_set_voltage(host->vqmmc, 3300000, 3300000);
-		if (ret) {
-			pr_warning("%s: Switching to 3.3V signalling voltage "
-				   " failed\n", mmc_hostname(host->mmc));
-			return -EIO;
-		}
-	}
-	/* Wait for 5ms */
-	usleep_range(5000, 5500);
+	/*
+	 * Signal Voltage Switching is only applicable for Host Controllers
+	 * v3.00 and above.
+	 */
+	if (host->version < SDHCI_SPEC_300)
+		return 0;
 
-	/* 3.3V regulator output should be stable within 5 ms */
 	ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
-	if (!(ctrl & SDHCI_CTRL_VDD_180))
-		return 0;
 
-	pr_warning("%s: 3.3V regulator output did not became stable\n",
-		   mmc_hostname(host->mmc));
+	switch (ios->signal_voltage) {
+	case MMC_SIGNAL_VOLTAGE_330:
+		/* Set 1.8V Signal Enable in the Host Control2 register to 0 */
+		ctrl &= ~SDHCI_CTRL_VDD_180;
+		sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
 
-	return -EIO;
-}
+		if (host->vqmmc) {
+			ret = regulator_set_voltage(host->vqmmc, 2700000, 3600000);
+			if (ret) {
+				pr_warning("%s: Switching to 3.3V signalling voltage "
+						" failed\n", mmc_hostname(host->mmc));
+				return -EIO;
+			}
+		}
+		/* Wait for 5ms */
+		usleep_range(5000, 5500);
 
-static int sdhci_do_1_8v_signal_voltage_switch(struct sdhci_host *host,
-						u16 ctrl)
-{
-	u8 pwr;
-	u16 clk;
-	u32 present_state;
-	int ret;
+		/* 3.3V regulator output should be stable within 5 ms */
+		ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+		if (!(ctrl & SDHCI_CTRL_VDD_180))
+			return 0;
 
-	/* Stop SDCLK */
-	clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
-	clk &= ~SDHCI_CLOCK_CARD_EN;
-	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+		pr_warning("%s: 3.3V regulator output did not became stable\n",
+				mmc_hostname(host->mmc));
+
+		return -EAGAIN;
+	case MMC_SIGNAL_VOLTAGE_180:
+		if (host->vqmmc) {
+			ret = regulator_set_voltage(host->vqmmc,
+					1700000, 1950000);
+			if (ret) {
+				pr_warning("%s: Switching to 1.8V signalling voltage "
+						" failed\n", mmc_hostname(host->mmc));
+				return -EIO;
+			}
+		}
 
-	/* Check whether DAT[3:0] is 0000 */
-	present_state = sdhci_readl(host, SDHCI_PRESENT_STATE);
-	if (!((present_state & SDHCI_DATA_LVL_MASK) >>
-	       SDHCI_DATA_LVL_SHIFT)) {
 		/*
 		 * Enable 1.8V Signal Enable in the Host Control2
 		 * register
 		 */
-		if (host->vqmmc)
-			ret = regulator_set_voltage(host->vqmmc,
-				1800000, 1800000);
-		else
-			ret = 0;
+		ctrl |= SDHCI_CTRL_VDD_180;
+		sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
 
-		if (!ret) {
-			ctrl |= SDHCI_CTRL_VDD_180;
-			sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
+		/* Wait for 5ms */
+		usleep_range(5000, 5500);
 
-			/* Wait for 5ms */
-			usleep_range(5000, 5500);
+		/* 1.8V regulator output should be stable within 5 ms */
+		ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+		if (ctrl & SDHCI_CTRL_VDD_180)
+			return 0;
 
-			ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
-			if (ctrl & SDHCI_CTRL_VDD_180) {
-				/* Provide SDCLK again and wait for 1ms */
-				clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
-				clk |= SDHCI_CLOCK_CARD_EN;
-				sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
-				usleep_range(1000, 1500);
+		pr_warning("%s: 1.8V regulator output did not became stable\n",
+				mmc_hostname(host->mmc));
 
-				/*
-				 * If DAT[3:0] level is 1111b, then the card
-				 * was successfully switched to 1.8V signaling.
-				 */
-				present_state = sdhci_readl(host,
-							SDHCI_PRESENT_STATE);
-				if ((present_state & SDHCI_DATA_LVL_MASK) ==
-				     SDHCI_DATA_LVL_MASK)
-					return 0;
+		return -EAGAIN;
+	case MMC_SIGNAL_VOLTAGE_120:
+		if (host->vqmmc) {
+			ret = regulator_set_voltage(host->vqmmc, 1100000, 1300000);
+			if (ret) {
+				pr_warning("%s: Switching to 1.2V signalling voltage "
+						" failed\n", mmc_hostname(host->mmc));
+				return -EIO;
 			}
 		}
-	}
-
-	/*
-	 * If we are here, that means the switch to 1.8V signaling
-	 * failed. We power cycle the card, and retry initialization
-	 * sequence by setting S18R to 0.
-	 */
-	pwr = sdhci_readb(host, SDHCI_POWER_CONTROL);
-	pwr &= ~SDHCI_POWER_ON;
-	sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
-	if (host->vmmc)
-		regulator_disable(host->vmmc);
-
-	/* Wait for 1ms as per the spec */
-	usleep_range(1000, 1500);
-	pwr |= SDHCI_POWER_ON;
-	sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
-	if (host->vmmc)
-		regulator_enable(host->vmmc);
-
-	pr_warning("%s: Switching to 1.8V signalling voltage failed, "
-		   "retrying with S18R set to 0\n", mmc_hostname(host->mmc));
-
-	return -EAGAIN;
-}
-
-static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
-						struct mmc_ios *ios)
-{
-	u16 ctrl;
-
-	/*
-	 * Signal Voltage Switching is only applicable for Host Controllers
-	 * v3.00 and above.
-	 */
-	if (host->version < SDHCI_SPEC_300)
 		return 0;
-
-	/*
-	 * We first check whether the request is to set signalling voltage
-	 * to 3.3V. If so, we change the voltage to 3.3V and return quickly.
-	 */
-	ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
-	if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330)
-		return sdhci_do_3_3v_signal_voltage_switch(host, ctrl);
-	else if (!(ctrl & SDHCI_CTRL_VDD_180) &&
-			(ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180))
-		return sdhci_do_1_8v_signal_voltage_switch(host, ctrl);
-	else
+	default:
 		/* No signal voltage switch required */
 		return 0;
+	}
 }
 
 static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
@@ -1756,23 +1805,29 @@ static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
 	return err;
 }
 
+static int sdhci_card_busy(struct mmc_host *mmc)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	u32 present_state;
+
+	sdhci_runtime_pm_get(host);
+	/* Check whether DAT[3:0] is 0000 */
+	present_state = sdhci_readl(host, SDHCI_PRESENT_STATE);
+	sdhci_runtime_pm_put(host);
+
+	return !(present_state & SDHCI_DATA_LVL_MASK);
+}
+
 static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 {
-	struct sdhci_host *host;
+	struct sdhci_host *host = mmc_priv(mmc);
 	u16 ctrl;
-	u32 ier;
 	int tuning_loop_counter = MAX_TUNING_LOOP;
-	unsigned long timeout;
 	int err = 0;
-	bool requires_tuning_nonuhs = false;
-
-	host = mmc_priv(mmc);
+	unsigned long flags;
 
 	sdhci_runtime_pm_get(host);
-	disable_irq(host->irq);
-	spin_lock(&host->lock);
-
-	ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+	spin_lock_irqsave(&host->lock, flags);
 
 	/*
 	 * The Host Controller needs tuning only in case of SDR104 mode
@@ -1781,21 +1836,32 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 	 * If the Host Controller supports the HS200 mode then the
 	 * tuning function has to be executed.
 	 */
-	if (((ctrl & SDHCI_CTRL_UHS_MASK) == SDHCI_CTRL_UHS_SDR50) &&
-	    (host->flags & SDHCI_SDR50_NEEDS_TUNING ||
-	     host->flags & SDHCI_HS200_NEEDS_TUNING))
-		requires_tuning_nonuhs = true;
-
-	if (((ctrl & SDHCI_CTRL_UHS_MASK) == SDHCI_CTRL_UHS_SDR104) ||
-	    requires_tuning_nonuhs)
-		ctrl |= SDHCI_CTRL_EXEC_TUNING;
-	else {
-		spin_unlock(&host->lock);
-		enable_irq(host->irq);
+	switch (host->timing) {
+	case MMC_TIMING_MMC_HS200:
+	case MMC_TIMING_UHS_SDR104:
+		break;
+
+	case MMC_TIMING_UHS_SDR50:
+		if (host->flags & SDHCI_SDR50_NEEDS_TUNING ||
+		    host->flags & SDHCI_SDR104_NEEDS_TUNING)
+			break;
+		/* FALLTHROUGH */
+
+	default:
+		spin_unlock_irqrestore(&host->lock, flags);
 		sdhci_runtime_pm_put(host);
 		return 0;
 	}
 
+	if (host->ops->platform_execute_tuning) {
+		spin_unlock_irqrestore(&host->lock, flags);
+		err = host->ops->platform_execute_tuning(host, opcode);
+		sdhci_runtime_pm_put(host);
+		return err;
+	}
+
+	ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+	ctrl |= SDHCI_CTRL_EXEC_TUNING;
 	sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
 
 	/*
@@ -1808,21 +1874,17 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 	 * to make sure we don't hit a controller bug, we _only_
 	 * enable Buffer Read Ready interrupt here.
 	 */
-	ier = sdhci_readl(host, SDHCI_INT_ENABLE);
-	sdhci_clear_set_irqs(host, ier, SDHCI_INT_DATA_AVAIL);
+	sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_INT_ENABLE);
+	sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_SIGNAL_ENABLE);
 
 	/*
 	 * Issue CMD19 repeatedly till Execute Tuning is set to 0 or the number
 	 * of loops reaches 40 times or a timeout of 150ms occurs.
 	 */
-	timeout = 150;
 	do {
 		struct mmc_command cmd = {0};
 		struct mmc_request mrq = {NULL};
 
-		if (!tuning_loop_counter && !timeout)
-			break;
-
 		cmd.opcode = opcode;
 		cmd.arg = 0;
 		cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
@@ -1830,6 +1892,9 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 		cmd.data = NULL;
 		cmd.error = 0;
 
+		if (tuning_loop_counter-- == 0)
+			break;
+
 		mrq.cmd = &cmd;
 		host->mrq = &mrq;
 
@@ -1863,15 +1928,12 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 		host->cmd = NULL;
 		host->mrq = NULL;
 
-		spin_unlock(&host->lock);
-		enable_irq(host->irq);
-
+		spin_unlock_irqrestore(&host->lock, flags);
 		/* Wait for Buffer Read Ready interrupt */
 		wait_event_interruptible_timeout(host->buf_ready_int,
 					(host->tuning_done == 1),
 					msecs_to_jiffies(50));
-		disable_irq(host->irq);
-		spin_lock(&host->lock);
+		spin_lock_irqsave(&host->lock, flags);
 
 		if (!host->tuning_done) {
 			pr_info(DRIVER_NAME ": Timeout waiting for "
@@ -1890,25 +1952,25 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 		host->tuning_done = 0;
 
 		ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
-		tuning_loop_counter--;
-		timeout--;
-		mdelay(1);
+
+		/* eMMC spec does not require a delay between tuning cycles */
+		if (opcode == MMC_SEND_TUNING_BLOCK)
+			mdelay(1);
 	} while (ctrl & SDHCI_CTRL_EXEC_TUNING);
 
 	/*
 	 * The Host Driver has exhausted the maximum number of loops allowed,
 	 * so use fixed sampling frequency.
 	 */
-	if (!tuning_loop_counter || !timeout) {
+	if (tuning_loop_counter < 0) {
 		ctrl &= ~SDHCI_CTRL_TUNED_CLK;
 		sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
-	} else {
-		if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) {
-			pr_info(DRIVER_NAME ": Tuning procedure"
-				" failed, falling back to fixed sampling"
-				" clock\n");
-			err = -EIO;
-		}
+	}
+	if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) {
+		pr_info(DRIVER_NAME ": Tuning procedure"
+			" failed, falling back to fixed sampling"
+			" clock\n");
+		err = -EIO;
 	}
 
 out:
@@ -1925,12 +1987,11 @@ out:
 			host->tuning_count * HZ);
 		/* Tuning mode 1 limits the maximum data length to 4MB */
 		mmc->max_blk_count = (4 * 1024 * 1024) / mmc->max_blk_size;
-	} else {
+	} else if (host->flags & SDHCI_USING_RETUNING_TIMER) {
 		host->flags &= ~SDHCI_NEEDS_RETUNING;
 		/* Reload the new initial value for timer */
-		if (host->tuning_mode == SDHCI_TUNING_MODE_1)
-			mod_timer(&host->tuning_timer, jiffies +
-				host->tuning_count * HZ);
+		mod_timer(&host->tuning_timer, jiffies +
+			  host->tuning_count * HZ);
 	}
 
 	/*
@@ -1944,99 +2005,91 @@ out:
 	if (err && (host->flags & SDHCI_USING_RETUNING_TIMER))
 		err = 0;
 
-	sdhci_clear_set_irqs(host, SDHCI_INT_DATA_AVAIL, ier);
-	spin_unlock(&host->lock);
-	enable_irq(host->irq);
+	sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+	sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
+	spin_unlock_irqrestore(&host->lock, flags);
 	sdhci_runtime_pm_put(host);
 
 	return err;
 }
 
-static void sdhci_do_enable_preset_value(struct sdhci_host *host, bool enable)
-{
-	u16 ctrl;
-	unsigned long flags;
 
+static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
+{
 	/* Host Controller v3.00 defines preset value registers */
 	if (host->version < SDHCI_SPEC_300)
 		return;
 
-	spin_lock_irqsave(&host->lock, flags);
-
-	ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
-
 	/*
 	 * We only enable or disable Preset Value if they are not already
 	 * enabled or disabled respectively. Otherwise, we bail out.
 	 */
-	if (enable && !(ctrl & SDHCI_CTRL_PRESET_VAL_ENABLE)) {
-		ctrl |= SDHCI_CTRL_PRESET_VAL_ENABLE;
-		sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
-		host->flags |= SDHCI_PV_ENABLED;
-	} else if (!enable && (ctrl & SDHCI_CTRL_PRESET_VAL_ENABLE)) {
-		ctrl &= ~SDHCI_CTRL_PRESET_VAL_ENABLE;
-		sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
-		host->flags &= ~SDHCI_PV_ENABLED;
-	}
-
-	spin_unlock_irqrestore(&host->lock, flags);
-}
+	if (host->preset_enabled != enable) {
+		u16 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
 
-static void sdhci_enable_preset_value(struct mmc_host *mmc, bool enable)
-{
-	struct sdhci_host *host = mmc_priv(mmc);
+		if (enable)
+			ctrl |= SDHCI_CTRL_PRESET_VAL_ENABLE;
+		else
+			ctrl &= ~SDHCI_CTRL_PRESET_VAL_ENABLE;
 
-	sdhci_runtime_pm_get(host);
-	sdhci_do_enable_preset_value(host, enable);
-	sdhci_runtime_pm_put(host);
-}
+		sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
 
-static const struct mmc_host_ops sdhci_ops = {
-	.request	= sdhci_request,
-	.set_ios	= sdhci_set_ios,
-	.get_ro		= sdhci_get_ro,
-	.hw_reset	= sdhci_hw_reset,
-	.enable_sdio_irq = sdhci_enable_sdio_irq,
-	.start_signal_voltage_switch	= sdhci_start_signal_voltage_switch,
-	.execute_tuning			= sdhci_execute_tuning,
-	.enable_preset_value		= sdhci_enable_preset_value,
-};
+		if (enable)
+			host->flags |= SDHCI_PV_ENABLED;
+		else
+			host->flags &= ~SDHCI_PV_ENABLED;
 
-/*****************************************************************************\
- *                                                                           *
- * Tasklets                                                                  *
- *                                                                           *
-\*****************************************************************************/
+		host->preset_enabled = enable;
+	}
+}
 
-static void sdhci_tasklet_card(unsigned long param)
+static void sdhci_card_event(struct mmc_host *mmc)
 {
-	struct sdhci_host *host;
+	struct sdhci_host *host = mmc_priv(mmc);
 	unsigned long flags;
 
-	host = (struct sdhci_host*)param;
+	/* First check if client has provided their own card event */
+	if (host->ops->card_event)
+		host->ops->card_event(host);
 
 	spin_lock_irqsave(&host->lock, flags);
 
 	/* Check host->mrq first in case we are runtime suspended */
-	if (host->mrq &&
-	    !(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) {
+	if (host->mrq && !sdhci_do_get_cd(host)) {
 		pr_err("%s: Card removed during transfer!\n",
 			mmc_hostname(host->mmc));
 		pr_err("%s: Resetting controller.\n",
 			mmc_hostname(host->mmc));
 
-		sdhci_reset(host, SDHCI_RESET_CMD);
-		sdhci_reset(host, SDHCI_RESET_DATA);
+		sdhci_do_reset(host, SDHCI_RESET_CMD);
+		sdhci_do_reset(host, SDHCI_RESET_DATA);
 
 		host->mrq->cmd->error = -ENOMEDIUM;
 		tasklet_schedule(&host->finish_tasklet);
 	}
 
 	spin_unlock_irqrestore(&host->lock, flags);
-
-	mmc_detect_change(host->mmc, msecs_to_jiffies(200));
 }
 
+static const struct mmc_host_ops sdhci_ops = {
+	.request	= sdhci_request,
+	.set_ios	= sdhci_set_ios,
+	.get_cd		= sdhci_get_cd,
+	.get_ro		= sdhci_get_ro,
+	.hw_reset	= sdhci_hw_reset,
+	.enable_sdio_irq = sdhci_enable_sdio_irq,
+	.start_signal_voltage_switch	= sdhci_start_signal_voltage_switch,
+	.execute_tuning			= sdhci_execute_tuning,
+	.card_event			= sdhci_card_event,
+	.card_busy	= sdhci_card_busy,
+};
+
+/*****************************************************************************\
+ *                                                                           *
+ * Tasklets                                                                  *
+ *                                                                           *
+\*****************************************************************************/
+
 static void sdhci_tasklet_finish(unsigned long param)
 {
 	struct sdhci_host *host;
@@ -2071,19 +2124,14 @@ static void sdhci_tasklet_finish(unsigned long param)
 		   (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) {
 
 		/* Some controllers need this kick or reset won't work here */
-		if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) {
-			unsigned int clock;
-
+		if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET)
 			/* This is to force an update */
-			clock = host->clock;
-			host->clock = 0;
-			sdhci_set_clock(host, clock);
-		}
+			host->ops->set_clock(host, host->clock);
 
 		/* Spec says we should do both at the same time, but Ricoh
 		   controllers do not like that. */
-		sdhci_reset(host, SDHCI_RESET_CMD);
-		sdhci_reset(host, SDHCI_RESET_DATA);
+		sdhci_do_reset(host, SDHCI_RESET_CMD);
+		sdhci_do_reset(host, SDHCI_RESET_DATA);
 	}
 
 	host->mrq = NULL;
@@ -2279,6 +2327,8 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
 		pr_err("%s: ADMA error\n", mmc_hostname(host->mmc));
 		sdhci_show_adma_error(host);
 		host->data->error = -EIO;
+		if (host->ops->adma_workaround)
+			host->ops->adma_workaround(host, intmask);
 	}
 
 	if (host->data->error)
@@ -2331,95 +2381,94 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
 
 static irqreturn_t sdhci_irq(int irq, void *dev_id)
 {
-	irqreturn_t result;
+	irqreturn_t result = IRQ_NONE;
 	struct sdhci_host *host = dev_id;
-	u32 intmask, unexpected = 0;
-	int cardint = 0, max_loops = 16;
+	u32 intmask, mask, unexpected = 0;
+	int max_loops = 16;
 
 	spin_lock(&host->lock);
 
-	if (host->runtime_suspended) {
+	if (host->runtime_suspended && !sdhci_sdio_irq_enabled(host)) {
 		spin_unlock(&host->lock);
-		pr_warning("%s: got irq while runtime suspended\n",
-		       mmc_hostname(host->mmc));
-		return IRQ_HANDLED;
+		return IRQ_NONE;
 	}
 
 	intmask = sdhci_readl(host, SDHCI_INT_STATUS);
-
 	if (!intmask || intmask == 0xffffffff) {
 		result = IRQ_NONE;
 		goto out;
 	}
 
-again:
-	DBG("*** %s got interrupt: 0x%08x\n",
-		mmc_hostname(host->mmc), intmask);
-
-	if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
-		u32 present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
-			      SDHCI_CARD_PRESENT;
-
-		/*
-		 * There is a observation on i.mx esdhc.  INSERT bit will be
-		 * immediately set again when it gets cleared, if a card is
-		 * inserted.  We have to mask the irq to prevent interrupt
-		 * storm which will freeze the system.  And the REMOVE gets
-		 * the same situation.
-		 *
-		 * More testing are needed here to ensure it works for other
-		 * platforms though.
-		 */
-		sdhci_mask_irqs(host, present ? SDHCI_INT_CARD_INSERT :
-						SDHCI_INT_CARD_REMOVE);
-		sdhci_unmask_irqs(host, present ? SDHCI_INT_CARD_REMOVE :
-						  SDHCI_INT_CARD_INSERT);
-
-		sdhci_writel(host, intmask & (SDHCI_INT_CARD_INSERT |
-			     SDHCI_INT_CARD_REMOVE), SDHCI_INT_STATUS);
-		intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE);
-		tasklet_schedule(&host->card_tasklet);
-	}
+	do {
+		/* Clear selected interrupts. */
+		mask = intmask & (SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK |
+				  SDHCI_INT_BUS_POWER);
+		sdhci_writel(host, mask, SDHCI_INT_STATUS);
 
-	if (intmask & SDHCI_INT_CMD_MASK) {
-		sdhci_writel(host, intmask & SDHCI_INT_CMD_MASK,
-			SDHCI_INT_STATUS);
-		sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
-	}
+		DBG("*** %s got interrupt: 0x%08x\n",
+			mmc_hostname(host->mmc), intmask);
 
-	if (intmask & SDHCI_INT_DATA_MASK) {
-		sdhci_writel(host, intmask & SDHCI_INT_DATA_MASK,
-			SDHCI_INT_STATUS);
-		sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
-	}
+		if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
+			u32 present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
+				      SDHCI_CARD_PRESENT;
 
-	intmask &= ~(SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK);
+			/*
+			 * There is a observation on i.mx esdhc.  INSERT
+			 * bit will be immediately set again when it gets
+			 * cleared, if a card is inserted.  We have to mask
+			 * the irq to prevent interrupt storm which will
+			 * freeze the system.  And the REMOVE gets the
+			 * same situation.
+			 *
+			 * More testing are needed here to ensure it works
+			 * for other platforms though.
+			 */
+			host->ier &= ~(SDHCI_INT_CARD_INSERT |
+				       SDHCI_INT_CARD_REMOVE);
+			host->ier |= present ? SDHCI_INT_CARD_REMOVE :
+					       SDHCI_INT_CARD_INSERT;
+			sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+			sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
+
+			sdhci_writel(host, intmask & (SDHCI_INT_CARD_INSERT |
+				     SDHCI_INT_CARD_REMOVE), SDHCI_INT_STATUS);
+
+			host->thread_isr |= intmask & (SDHCI_INT_CARD_INSERT |
+						       SDHCI_INT_CARD_REMOVE);
+			result = IRQ_WAKE_THREAD;
+		}
 
-	intmask &= ~SDHCI_INT_ERROR;
+		if (intmask & SDHCI_INT_CMD_MASK)
+			sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
 
-	if (intmask & SDHCI_INT_BUS_POWER) {
-		pr_err("%s: Card is consuming too much power!\n",
-			mmc_hostname(host->mmc));
-		sdhci_writel(host, SDHCI_INT_BUS_POWER, SDHCI_INT_STATUS);
-	}
+		if (intmask & SDHCI_INT_DATA_MASK)
+			sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
 
-	intmask &= ~SDHCI_INT_BUS_POWER;
+		if (intmask & SDHCI_INT_BUS_POWER)
+			pr_err("%s: Card is consuming too much power!\n",
+				mmc_hostname(host->mmc));
 
-	if (intmask & SDHCI_INT_CARD_INT)
-		cardint = 1;
+		if (intmask & SDHCI_INT_CARD_INT) {
+			sdhci_enable_sdio_irq_nolock(host, false);
+			host->thread_isr |= SDHCI_INT_CARD_INT;
+			result = IRQ_WAKE_THREAD;
+		}
 
-	intmask &= ~SDHCI_INT_CARD_INT;
+		intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE |
+			     SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK |
+			     SDHCI_INT_ERROR | SDHCI_INT_BUS_POWER |
+			     SDHCI_INT_CARD_INT);
 
-	if (intmask) {
-		unexpected |= intmask;
-		sdhci_writel(host, intmask, SDHCI_INT_STATUS);
-	}
+		if (intmask) {
+			unexpected |= intmask;
+			sdhci_writel(host, intmask, SDHCI_INT_STATUS);
+		}
 
-	result = IRQ_HANDLED;
+		if (result == IRQ_NONE)
+			result = IRQ_HANDLED;
 
-	intmask = sdhci_readl(host, SDHCI_INT_STATUS);
-	if (intmask && --max_loops)
-		goto again;
+		intmask = sdhci_readl(host, SDHCI_INT_STATUS);
+	} while (intmask && --max_loops);
 out:
 	spin_unlock(&host->lock);
 
@@ -2428,15 +2477,38 @@ out:
 			   mmc_hostname(host->mmc), unexpected);
 		sdhci_dumpregs(host);
 	}
-	/*
-	 * We have to delay this as it calls back into the driver.
-	 */
-	if (cardint)
-		mmc_signal_sdio_irq(host->mmc);
 
 	return result;
 }
 
+static irqreturn_t sdhci_thread_irq(int irq, void *dev_id)
+{
+	struct sdhci_host *host = dev_id;
+	unsigned long flags;
+	u32 isr;
+
+	spin_lock_irqsave(&host->lock, flags);
+	isr = host->thread_isr;
+	host->thread_isr = 0;
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	if (isr & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
+		sdhci_card_event(host->mmc);
+		mmc_detect_change(host->mmc, msecs_to_jiffies(200));
+	}
+
+	if (isr & SDHCI_INT_CARD_INT) {
+		sdio_run_irqs(host->mmc);
+
+		spin_lock_irqsave(&host->lock, flags);
+		if (host->flags & SDHCI_SDIO_IRQ_ENABLED)
+			sdhci_enable_sdio_irq_nolock(host, true);
+		spin_unlock_irqrestore(&host->lock, flags);
+	}
+
+	return isr ? IRQ_HANDLED : IRQ_NONE;
+}
+
 /*****************************************************************************\
  *                                                                           *
  * Suspend/resume                                                            *
@@ -2444,14 +2516,35 @@ out:
 \*****************************************************************************/
 
 #ifdef CONFIG_PM
+void sdhci_enable_irq_wakeups(struct sdhci_host *host)
+{
+	u8 val;
+	u8 mask = SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE
+			| SDHCI_WAKE_ON_INT;
 
-int sdhci_suspend_host(struct sdhci_host *host)
+	val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL);
+	val |= mask ;
+	/* Avoid fake wake up */
+	if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
+		val &= ~(SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE);
+	sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
+}
+EXPORT_SYMBOL_GPL(sdhci_enable_irq_wakeups);
+
+void sdhci_disable_irq_wakeups(struct sdhci_host *host)
 {
-	int ret;
+	u8 val;
+	u8 mask = SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE
+			| SDHCI_WAKE_ON_INT;
 
-	if (host->ops->platform_suspend)
-		host->ops->platform_suspend(host);
+	val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL);
+	val &= ~mask;
+	sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
+}
+EXPORT_SYMBOL_GPL(sdhci_disable_irq_wakeups);
 
+int sdhci_suspend_host(struct sdhci_host *host)
+{
 	sdhci_disable_card_detection(host);
 
 	/* Disable tuning since we are suspending */
@@ -2460,39 +2553,39 @@ int sdhci_suspend_host(struct sdhci_host *host)
 		host->flags &= ~SDHCI_NEEDS_RETUNING;
 	}
 
-	ret = mmc_suspend_host(host->mmc);
-	if (ret) {
-		if (host->flags & SDHCI_USING_RETUNING_TIMER) {
-			host->flags |= SDHCI_NEEDS_RETUNING;
-			mod_timer(&host->tuning_timer, jiffies +
-					host->tuning_count * HZ);
-		}
-
-		sdhci_enable_card_detection(host);
-
-		return ret;
+	if (!device_may_wakeup(mmc_dev(host->mmc))) {
+		host->ier = 0;
+		sdhci_writel(host, 0, SDHCI_INT_ENABLE);
+		sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
+		free_irq(host->irq, host);
+	} else {
+		sdhci_enable_irq_wakeups(host);
+		enable_irq_wake(host->irq);
 	}
-
-	free_irq(host->irq, host);
-
-	return ret;
+	return 0;
 }
 
 EXPORT_SYMBOL_GPL(sdhci_suspend_host);
 
 int sdhci_resume_host(struct sdhci_host *host)
 {
-	int ret;
+	int ret = 0;
 
 	if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
 		if (host->ops->enable_dma)
 			host->ops->enable_dma(host);
 	}
 
-	ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
-			  mmc_hostname(host->mmc), host);
-	if (ret)
-		return ret;
+	if (!device_may_wakeup(mmc_dev(host->mmc))) {
+		ret = request_threaded_irq(host->irq, sdhci_irq,
+					   sdhci_thread_irq, IRQF_SHARED,
+					   mmc_hostname(host->mmc), host);
+		if (ret)
+			return ret;
+	} else {
+		sdhci_disable_irq_wakeups(host);
+		disable_irq_wake(host->irq);
+	}
 
 	if ((host->mmc->pm_flags & MMC_PM_KEEP_POWER) &&
 	    (host->quirks2 & SDHCI_QUIRK2_HOST_OFF_CARD_ON)) {
@@ -2506,12 +2599,8 @@ int sdhci_resume_host(struct sdhci_host *host)
 		mmiowb();
 	}
 
-	ret = mmc_resume_host(host->mmc);
 	sdhci_enable_card_detection(host);
 
-	if (host->ops->platform_resume)
-		host->ops->platform_resume(host);
-
 	/* Set the re-tuning expiration flag */
 	if (host->flags & SDHCI_USING_RETUNING_TIMER)
 		host->flags |= SDHCI_NEEDS_RETUNING;
@@ -2520,17 +2609,6 @@ int sdhci_resume_host(struct sdhci_host *host)
 }
 
 EXPORT_SYMBOL_GPL(sdhci_resume_host);
-
-void sdhci_enable_irq_wakeups(struct sdhci_host *host)
-{
-	u8 val;
-	val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL);
-	val |= SDHCI_WAKE_ON_INT;
-	sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
-}
-
-EXPORT_SYMBOL_GPL(sdhci_enable_irq_wakeups);
-
 #endif /* CONFIG_PM */
 
 #ifdef CONFIG_PM_RUNTIME
@@ -2546,6 +2624,22 @@ static int sdhci_runtime_pm_put(struct sdhci_host *host)
 	return pm_runtime_put_autosuspend(host->mmc->parent);
 }
 
+static void sdhci_runtime_pm_bus_on(struct sdhci_host *host)
+{
+	if (host->runtime_suspended || host->bus_on)
+		return;
+	host->bus_on = true;
+	pm_runtime_get_noresume(host->mmc->parent);
+}
+
+static void sdhci_runtime_pm_bus_off(struct sdhci_host *host)
+{
+	if (host->runtime_suspended || !host->bus_on)
+		return;
+	host->bus_on = false;
+	pm_runtime_put_noidle(host->mmc->parent);
+}
+
 int sdhci_runtime_suspend_host(struct sdhci_host *host)
 {
 	unsigned long flags;
@@ -2558,10 +2652,12 @@ int sdhci_runtime_suspend_host(struct sdhci_host *host)
 	}
 
 	spin_lock_irqsave(&host->lock, flags);
-	sdhci_mask_irqs(host, SDHCI_INT_ALL_MASK);
+	host->ier &= SDHCI_INT_CARD_INT;
+	sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+	sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
 	spin_unlock_irqrestore(&host->lock, flags);
 
-	synchronize_irq(host->irq);
+	synchronize_hardirq(host->irq);
 
 	spin_lock_irqsave(&host->lock, flags);
 	host->runtime_suspended = true;
@@ -2589,8 +2685,12 @@ int sdhci_runtime_resume_host(struct sdhci_host *host)
 	sdhci_do_set_ios(host, &host->mmc->ios);
 
 	sdhci_do_start_signal_voltage_switch(host, &host->mmc->ios);
-	if (host_flags & SDHCI_PV_ENABLED)
-		sdhci_do_enable_preset_value(host, true);
+	if ((host_flags & SDHCI_PV_ENABLED) &&
+		!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN)) {
+		spin_lock_irqsave(&host->lock, flags);
+		sdhci_enable_preset_value(host, true);
+		spin_unlock_irqrestore(&host->lock, flags);
+	}
 
 	/* Set the re-tuning expiration flag */
 	if (host->flags & SDHCI_USING_RETUNING_TIMER)
@@ -2601,7 +2701,7 @@ int sdhci_runtime_resume_host(struct sdhci_host *host)
 	host->runtime_suspended = false;
 
 	/* Enable SDIO IRQ */
-	if ((host->flags & SDHCI_SDIO_IRQ_ENABLED))
+	if (host->flags & SDHCI_SDIO_IRQ_ENABLED)
 		sdhci_enable_sdio_irq_nolock(host, true);
 
 	/* Enable Card Detection */
@@ -2660,7 +2760,7 @@ int sdhci_add_host(struct sdhci_host *host)
 	if (debug_quirks2)
 		host->quirks2 = debug_quirks2;
 
-	sdhci_reset(host, SDHCI_RESET_ALL);
+	sdhci_do_reset(host, SDHCI_RESET_ALL);
 
 	host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
 	host->version = (host->version & SDHCI_SPEC_VER_MASK)
@@ -2720,15 +2820,29 @@ int sdhci_add_host(struct sdhci_host *host)
 		 * (128) and potentially one alignment transfer for
 		 * each of those entries.
 		 */
-		host->adma_desc = kmalloc((128 * 2 + 1) * 4, GFP_KERNEL);
+		host->adma_desc = dma_alloc_coherent(mmc_dev(host->mmc),
+						     ADMA_SIZE, &host->adma_addr,
+						     GFP_KERNEL);
 		host->align_buffer = kmalloc(128 * 4, GFP_KERNEL);
 		if (!host->adma_desc || !host->align_buffer) {
-			kfree(host->adma_desc);
+			dma_free_coherent(mmc_dev(host->mmc), ADMA_SIZE,
+					  host->adma_desc, host->adma_addr);
 			kfree(host->align_buffer);
 			pr_warning("%s: Unable to allocate ADMA "
 				"buffers. Falling back to standard DMA.\n",
 				mmc_hostname(mmc));
 			host->flags &= ~SDHCI_USE_ADMA;
+			host->adma_desc = NULL;
+			host->align_buffer = NULL;
+		} else if (host->adma_addr & 3) {
+			pr_warning("%s: unable to allocate aligned ADMA descriptor\n",
+				   mmc_hostname(mmc));
+			host->flags &= ~SDHCI_USE_ADMA;
+			dma_free_coherent(mmc_dev(host->mmc), ADMA_SIZE,
+					  host->adma_desc, host->adma_addr);
+			kfree(host->align_buffer);
+			host->adma_desc = NULL;
+			host->align_buffer = NULL;
 		}
 	}
 
@@ -2810,9 +2924,10 @@ int sdhci_add_host(struct sdhci_host *host)
 	if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)
 		host->timeout_clk = mmc->f_max / 1000;
 
-	mmc->max_discard_to = (1 << 27) / host->timeout_clk;
+	mmc->max_busy_timeout = (1 << 27) / host->timeout_clk;
 
 	mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE | MMC_CAP_CMD23;
+	mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
 
 	if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12)
 		host->flags |= SDHCI_AUTO_CMD12;
@@ -2837,6 +2952,9 @@ int sdhci_add_host(struct sdhci_host *host)
 	if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
 		mmc->caps |= MMC_CAP_4_BIT_DATA;
 
+	if (host->quirks2 & SDHCI_QUIRK2_HOST_NO_CMD23)
+		mmc->caps &= ~MMC_CAP_CMD23;
+
 	if (caps[0] & SDHCI_CAN_DO_HISPD)
 		mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
 
@@ -2845,14 +2963,28 @@ int sdhci_add_host(struct sdhci_host *host)
 		mmc->caps |= MMC_CAP_NEEDS_POLL;
 
 	/* If vqmmc regulator and no 1.8V signalling, then there's no UHS */
-	host->vqmmc = regulator_get(mmc_dev(mmc), "vqmmc");
-	if (IS_ERR(host->vqmmc)) {
-		pr_info("%s: no vqmmc regulator found\n", mmc_hostname(mmc));
-		host->vqmmc = NULL;
+	host->vqmmc = regulator_get_optional(mmc_dev(mmc), "vqmmc");
+	if (IS_ERR_OR_NULL(host->vqmmc)) {
+		if (PTR_ERR(host->vqmmc) < 0) {
+			pr_info("%s: no vqmmc regulator found\n",
+				mmc_hostname(mmc));
+			host->vqmmc = NULL;
+		}
+	} else {
+		ret = regulator_enable(host->vqmmc);
+		if (!regulator_is_supported_voltage(host->vqmmc, 1700000,
+			1950000))
+			caps[1] &= ~(SDHCI_SUPPORT_SDR104 |
+					SDHCI_SUPPORT_SDR50 |
+					SDHCI_SUPPORT_DDR50);
+		if (ret) {
+			pr_warn("%s: Failed to enable vqmmc regulator: %d\n",
+				mmc_hostname(mmc), ret);
+			host->vqmmc = NULL;
+		}
 	}
-	else if (regulator_is_supported_voltage(host->vqmmc, 1800000, 1800000))
-		regulator_enable(host->vqmmc);
-	else
+
+	if (host->quirks2 & SDHCI_QUIRK2_NO_1_8_V)
 		caps[1] &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
 		       SDHCI_SUPPORT_DDR50);
 
@@ -2862,21 +2994,27 @@ int sdhci_add_host(struct sdhci_host *host)
 		mmc->caps |= MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25;
 
 	/* SDR104 supports also implies SDR50 support */
-	if (caps[1] & SDHCI_SUPPORT_SDR104)
+	if (caps[1] & SDHCI_SUPPORT_SDR104) {
 		mmc->caps |= MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_SDR50;
-	else if (caps[1] & SDHCI_SUPPORT_SDR50)
+		/* SD3.0: SDR104 is supported so (for eMMC) the caps2
+		 * field can be promoted to support HS200.
+		 */
+		if (!(host->quirks2 & SDHCI_QUIRK2_BROKEN_HS200))
+			mmc->caps2 |= MMC_CAP2_HS200;
+	} else if (caps[1] & SDHCI_SUPPORT_SDR50)
 		mmc->caps |= MMC_CAP_UHS_SDR50;
 
-	if (caps[1] & SDHCI_SUPPORT_DDR50)
+	if ((caps[1] & SDHCI_SUPPORT_DDR50) &&
+		!(host->quirks2 & SDHCI_QUIRK2_BROKEN_DDR50))
 		mmc->caps |= MMC_CAP_UHS_DDR50;
 
 	/* Does the host need tuning for SDR50? */
 	if (caps[1] & SDHCI_USE_SDR50_TUNING)
 		host->flags |= SDHCI_SDR50_NEEDS_TUNING;
 
-	/* Does the host need tuning for HS200? */
+	/* Does the host need tuning for SDR104 / HS200? */
 	if (mmc->caps2 & MMC_CAP2_HS200)
-		host->flags |= SDHCI_HS200_NEEDS_TUNING;
+		host->flags |= SDHCI_SDR104_NEEDS_TUNING;
 
 	/* Driver Type(s) (A, C, D) supported by the host */
 	if (caps[1] & SDHCI_DRIVER_TYPE_A)
@@ -2903,25 +3041,29 @@ int sdhci_add_host(struct sdhci_host *host)
 
 	ocr_avail = 0;
 
-	host->vmmc = regulator_get(mmc_dev(mmc), "vmmc");
-	if (IS_ERR(host->vmmc)) {
-		pr_info("%s: no vmmc regulator found\n", mmc_hostname(mmc));
-		host->vmmc = NULL;
-	} else
-		regulator_enable(host->vmmc);
+	host->vmmc = regulator_get_optional(mmc_dev(mmc), "vmmc");
+	if (IS_ERR_OR_NULL(host->vmmc)) {
+		if (PTR_ERR(host->vmmc) < 0) {
+			pr_info("%s: no vmmc regulator found\n",
+				mmc_hostname(mmc));
+			host->vmmc = NULL;
+		}
+	}
 
 #ifdef CONFIG_REGULATOR
-	if (host->vmmc) {
-		ret = regulator_is_supported_voltage(host->vmmc, 3300000,
-			3300000);
+	/*
+	 * Voltage range check makes sense only if regulator reports
+	 * any voltage value.
+	 */
+	if (host->vmmc && regulator_get_voltage(host->vmmc) > 0) {
+		ret = regulator_is_supported_voltage(host->vmmc, 2700000,
+			3600000);
 		if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_330)))
 			caps[0] &= ~SDHCI_CAN_VDD_330;
-		ret = regulator_is_supported_voltage(host->vmmc, 3000000,
-			3000000);
 		if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_300)))
 			caps[0] &= ~SDHCI_CAN_VDD_300;
-		ret = regulator_is_supported_voltage(host->vmmc, 1800000,
-			1800000);
+		ret = regulator_is_supported_voltage(host->vmmc, 1700000,
+			1950000);
 		if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_180)))
 			caps[0] &= ~SDHCI_CAN_VDD_180;
 	}
@@ -2976,6 +3118,9 @@ int sdhci_add_host(struct sdhci_host *host)
 				   SDHCI_MAX_CURRENT_MULTIPLIER;
 	}
 
+	if (host->ocr_mask)
+		ocr_avail = host->ocr_mask;
+
 	mmc->ocr_avail = ocr_avail;
 	mmc->ocr_avail_sdio = ocr_avail;
 	if (host->ocr_avail_sdio)
@@ -3054,8 +3199,6 @@ int sdhci_add_host(struct sdhci_host *host)
 	/*
 	 * Init tasklets.
 	 */
-	tasklet_init(&host->card_tasklet,
-		sdhci_tasklet_card, (unsigned long)host);
 	tasklet_init(&host->finish_tasklet,
 		sdhci_tasklet_finish, (unsigned long)host);
 
@@ -3070,16 +3213,16 @@ int sdhci_add_host(struct sdhci_host *host)
 		host->tuning_timer.function = sdhci_tuning_timer;
 	}
 
-	ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
-		mmc_hostname(mmc), host);
+	sdhci_init(host, 0);
+
+	ret = request_threaded_irq(host->irq, sdhci_irq, sdhci_thread_irq,
+				   IRQF_SHARED,	mmc_hostname(mmc), host);
 	if (ret) {
 		pr_err("%s: Failed to request IRQ %d: %d\n",
 		       mmc_hostname(mmc), host->irq, ret);
 		goto untasklet;
 	}
 
-	sdhci_init(host, 0);
-
 #ifdef CONFIG_MMC_DEBUG
 	sdhci_dumpregs(host);
 #endif
@@ -3115,11 +3258,12 @@ int sdhci_add_host(struct sdhci_host *host)
 
 #ifdef SDHCI_USE_LEDS_CLASS
 reset:
-	sdhci_reset(host, SDHCI_RESET_ALL);
+	sdhci_do_reset(host, SDHCI_RESET_ALL);
+	sdhci_writel(host, 0, SDHCI_INT_ENABLE);
+	sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
 	free_irq(host->irq, host);
 #endif
 untasklet:
-	tasklet_kill(&host->card_tasklet);
 	tasklet_kill(&host->finish_tasklet);
 
 	return ret;
@@ -3156,13 +3300,14 @@ void sdhci_remove_host(struct sdhci_host *host, int dead)
 #endif
 
 	if (!dead)
-		sdhci_reset(host, SDHCI_RESET_ALL);
+		sdhci_do_reset(host, SDHCI_RESET_ALL);
 
+	sdhci_writel(host, 0, SDHCI_INT_ENABLE);
+	sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
 	free_irq(host->irq, host);
 
 	del_timer_sync(&host->timer);
 
-	tasklet_kill(&host->card_tasklet);
 	tasklet_kill(&host->finish_tasklet);
 
 	if (host->vmmc) {
@@ -3175,7 +3320,9 @@ void sdhci_remove_host(struct sdhci_host *host, int dead)
 		regulator_put(host->vqmmc);
 	}
 
-	kfree(host->adma_desc);
+	if (host->adma_desc)
+		dma_free_coherent(mmc_dev(host->mmc), ADMA_SIZE,
+				  host->adma_desc, host->adma_addr);
 	kfree(host->align_buffer);
 
 	host->adma_desc = NULL;