1 files changed, 138 insertions, 191 deletions

diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c
index d70c54c7b70..9d535c7336e 100644
--- a/drivers/mmc/host/sdhci-spear.c
+++ b/drivers/mmc/host/sdhci-spear.c
@@ -4,7 +4,7 @@
  * Support of SDHCI platform devices for spear soc family
  *
  * Copyright (C) 2010 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * Inspired by sdhci-pltfm.c
  *
@@ -17,12 +17,17 @@
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/highmem.h>
+#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
 #include <linux/platform_device.h>
+#include <linux/pm.h>
 #include <linux/slab.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/sdhci-spear.h>
+#include <linux/mmc/slot-gpio.h>
 #include <linux/io.h>
 #include "sdhci.h"
 
@@ -32,267 +37,209 @@ struct spear_sdhci {
 };
 
 /* sdhci ops */
-static struct sdhci_ops sdhci_pltfm_ops = {
-	/* Nothing to do for now. */
+static const struct sdhci_ops sdhci_pltfm_ops = {
+	.set_clock = sdhci_set_clock,
+	.set_bus_width = sdhci_set_bus_width,
+	.reset = sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
 };
 
-/* gpio card detection interrupt handler */
-static irqreturn_t sdhci_gpio_irq(int irq, void *dev_id)
+#ifdef CONFIG_OF
+static struct sdhci_plat_data *sdhci_probe_config_dt(struct platform_device *pdev)
 {
-	struct platform_device *pdev = dev_id;
-	struct sdhci_host *host = platform_get_drvdata(pdev);
-	struct spear_sdhci *sdhci = dev_get_platdata(&pdev->dev);
-	unsigned long gpio_irq_type;
-	int val;
-
-	val = gpio_get_value(sdhci->data->card_int_gpio);
-
-	/* val == 1 -> card removed, val == 0 -> card inserted */
-	/* if card removed - set irq for low level, else vice versa */
-	gpio_irq_type = val ? IRQF_TRIGGER_LOW : IRQF_TRIGGER_HIGH;
-	set_irq_type(irq, gpio_irq_type);
-
-	if (sdhci->data->card_power_gpio >= 0) {
-		if (!sdhci->data->power_always_enb) {
-			/* if card inserted, give power, otherwise remove it */
-			val = sdhci->data->power_active_high ? !val : val ;
-			gpio_set_value(sdhci->data->card_power_gpio, val);
-		}
+	struct device_node *np = pdev->dev.of_node;
+	struct sdhci_plat_data *pdata = NULL;
+	int cd_gpio;
+
+	cd_gpio = of_get_named_gpio(np, "cd-gpios", 0);
+	if (!gpio_is_valid(cd_gpio))
+		cd_gpio = -1;
+
+	/* If pdata is required */
+	if (cd_gpio != -1) {
+		pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+		if (!pdata)
+			dev_err(&pdev->dev, "DT: kzalloc failed\n");
+		else
+			pdata->card_int_gpio = cd_gpio;
 	}
 
-	/* inform sdhci driver about card insertion/removal */
-	tasklet_schedule(&host->card_tasklet);
-
-	return IRQ_HANDLED;
+	return pdata;
+}
+#else
+static struct sdhci_plat_data *sdhci_probe_config_dt(struct platform_device *pdev)
+{
+	return ERR_PTR(-ENOSYS);
 }
+#endif
 
-static int __devinit sdhci_probe(struct platform_device *pdev)
+static int sdhci_probe(struct platform_device *pdev)
 {
+	struct device_node *np = pdev->dev.of_node;
 	struct sdhci_host *host;
 	struct resource *iomem;
 	struct spear_sdhci *sdhci;
+	struct device *dev;
 	int ret;
 
-	BUG_ON(pdev == NULL);
-
-	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!iomem) {
-		ret = -ENOMEM;
-		dev_dbg(&pdev->dev, "memory resource not defined\n");
+	dev = pdev->dev.parent ? pdev->dev.parent : &pdev->dev;
+	host = sdhci_alloc_host(dev, sizeof(*sdhci));
+	if (IS_ERR(host)) {
+		ret = PTR_ERR(host);
+		dev_dbg(&pdev->dev, "cannot allocate memory for sdhci\n");
 		goto err;
 	}
 
-	if (!request_mem_region(iomem->start, resource_size(iomem),
-				"spear-sdhci")) {
-		ret = -EBUSY;
-		dev_dbg(&pdev->dev, "cannot request region\n");
-		goto err;
+	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	host->ioaddr = devm_ioremap_resource(&pdev->dev, iomem);
+	if (IS_ERR(host->ioaddr)) {
+		ret = PTR_ERR(host->ioaddr);
+		dev_dbg(&pdev->dev, "unable to map iomem: %d\n", ret);
+		goto err_host;
 	}
 
-	sdhci = kzalloc(sizeof(*sdhci), GFP_KERNEL);
-	if (!sdhci) {
-		ret = -ENOMEM;
-		dev_dbg(&pdev->dev, "cannot allocate memory for sdhci\n");
-		goto err_kzalloc;
-	}
+	host->hw_name = "sdhci";
+	host->ops = &sdhci_pltfm_ops;
+	host->irq = platform_get_irq(pdev, 0);
+	host->quirks = SDHCI_QUIRK_BROKEN_ADMA;
+
+	sdhci = sdhci_priv(host);
 
 	/* clk enable */
-	sdhci->clk = clk_get(&pdev->dev, NULL);
+	sdhci->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(sdhci->clk)) {
 		ret = PTR_ERR(sdhci->clk);
 		dev_dbg(&pdev->dev, "Error getting clock\n");
-		goto err_clk_get;
+		goto err_host;
 	}
 
-	ret = clk_enable(sdhci->clk);
+	ret = clk_prepare_enable(sdhci->clk);
 	if (ret) {
 		dev_dbg(&pdev->dev, "Error enabling clock\n");
-		goto err_clk_enb;
+		goto err_host;
 	}
 
-	/* overwrite platform_data */
-	sdhci->data = dev_get_platdata(&pdev->dev);
-	pdev->dev.platform_data = sdhci;
+	ret = clk_set_rate(sdhci->clk, 50000000);
+	if (ret)
+		dev_dbg(&pdev->dev, "Error setting desired clk, clk=%lu\n",
+				clk_get_rate(sdhci->clk));
 
-	if (pdev->dev.parent)
-		host = sdhci_alloc_host(pdev->dev.parent, 0);
-	else
-		host = sdhci_alloc_host(&pdev->dev, 0);
-
-	if (IS_ERR(host)) {
-		ret = PTR_ERR(host);
-		dev_dbg(&pdev->dev, "error allocating host\n");
-		goto err_alloc_host;
+	if (np) {
+		sdhci->data = sdhci_probe_config_dt(pdev);
+		if (IS_ERR(sdhci->data)) {
+			dev_err(&pdev->dev, "DT: Failed to get pdata\n");
+			goto disable_clk;
+		}
+	} else {
+		sdhci->data = dev_get_platdata(&pdev->dev);
 	}
 
-	host->hw_name = "sdhci";
-	host->ops = &sdhci_pltfm_ops;
-	host->irq = platform_get_irq(pdev, 0);
-	host->quirks = SDHCI_QUIRK_BROKEN_ADMA;
-
-	host->ioaddr = ioremap(iomem->start, resource_size(iomem));
-	if (!host->ioaddr) {
-		ret = -ENOMEM;
-		dev_dbg(&pdev->dev, "failed to remap registers\n");
-		goto err_ioremap;
+	/*
+	 * It is optional to use GPIOs for sdhci card detection. If
+	 * sdhci->data is NULL, then use original sdhci lines otherwise
+	 * GPIO lines. We use the built-in GPIO support for this.
+	 */
+	if (sdhci->data && sdhci->data->card_int_gpio >= 0) {
+		ret = mmc_gpio_request_cd(host->mmc,
+					  sdhci->data->card_int_gpio, 0);
+		if (ret < 0) {
+			dev_dbg(&pdev->dev,
+				"failed to request card-detect gpio%d\n",
+				sdhci->data->card_int_gpio);
+			goto disable_clk;
+		}
 	}
 
 	ret = sdhci_add_host(host);
 	if (ret) {
 		dev_dbg(&pdev->dev, "error adding host\n");
-		goto err_add_host;
+		goto disable_clk;
 	}
 
 	platform_set_drvdata(pdev, host);
 
-	/*
-	 * It is optional to use GPIOs for sdhci Power control & sdhci card
-	 * interrupt detection. If sdhci->data is NULL, then use original sdhci
-	 * lines otherwise GPIO lines.
-	 * If GPIO is selected for power control, then power should be disabled
-	 * after card removal and should be enabled when card insertion
-	 * interrupt occurs
-	 */
-	if (!sdhci->data)
-		return 0;
-
-	if (sdhci->data->card_power_gpio >= 0) {
-		int val = 0;
-
-		ret = gpio_request(sdhci->data->card_power_gpio, "sdhci");
-		if (ret < 0) {
-			dev_dbg(&pdev->dev, "gpio request fail: %d\n",
-					sdhci->data->card_power_gpio);
-			goto err_pgpio_request;
-		}
-
-		if (sdhci->data->power_always_enb)
-			val = sdhci->data->power_active_high;
-		else
-			val = !sdhci->data->power_active_high;
-
-		ret = gpio_direction_output(sdhci->data->card_power_gpio, val);
-		if (ret) {
-			dev_dbg(&pdev->dev, "gpio set direction fail: %d\n",
-					sdhci->data->card_power_gpio);
-			goto err_pgpio_direction;
-		}
-
-		gpio_set_value(sdhci->data->card_power_gpio, 1);
-	}
-
-	if (sdhci->data->card_int_gpio >= 0) {
-		ret = gpio_request(sdhci->data->card_int_gpio, "sdhci");
-		if (ret < 0) {
-			dev_dbg(&pdev->dev, "gpio request fail: %d\n",
-					sdhci->data->card_int_gpio);
-			goto err_igpio_request;
-		}
-
-		ret = gpio_direction_input(sdhci->data->card_int_gpio);
-		if (ret) {
-			dev_dbg(&pdev->dev, "gpio set direction fail: %d\n",
-					sdhci->data->card_int_gpio);
-			goto err_igpio_direction;
-		}
-		ret = request_irq(gpio_to_irq(sdhci->data->card_int_gpio),
-				sdhci_gpio_irq, IRQF_TRIGGER_LOW,
-				mmc_hostname(host->mmc), pdev);
-		if (ret) {
-			dev_dbg(&pdev->dev, "gpio request irq fail: %d\n",
-					sdhci->data->card_int_gpio);
-			goto err_igpio_request_irq;
-		}
-
-	}
-
 	return 0;
 
-err_igpio_request_irq:
-err_igpio_direction:
-	if (sdhci->data->card_int_gpio >= 0)
-		gpio_free(sdhci->data->card_int_gpio);
-err_igpio_request:
-err_pgpio_direction:
-	if (sdhci->data->card_power_gpio >= 0)
-		gpio_free(sdhci->data->card_power_gpio);
-err_pgpio_request:
-	platform_set_drvdata(pdev, NULL);
-	sdhci_remove_host(host, 1);
-err_add_host:
-	iounmap(host->ioaddr);
-err_ioremap:
+disable_clk:
+	clk_disable_unprepare(sdhci->clk);
+err_host:
 	sdhci_free_host(host);
-err_alloc_host:
-	clk_disable(sdhci->clk);
-err_clk_enb:
-	clk_put(sdhci->clk);
-err_clk_get:
-	kfree(sdhci);
-err_kzalloc:
-	release_mem_region(iomem->start, resource_size(iomem));
 err:
 	dev_err(&pdev->dev, "spear-sdhci probe failed: %d\n", ret);
 	return ret;
 }
 
-static int __devexit sdhci_remove(struct platform_device *pdev)
+static int sdhci_remove(struct platform_device *pdev)
 {
 	struct sdhci_host *host = platform_get_drvdata(pdev);
-	struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	struct spear_sdhci *sdhci = dev_get_platdata(&pdev->dev);
-	int dead;
+	struct spear_sdhci *sdhci = sdhci_priv(host);
+	int dead = 0;
 	u32 scratch;
 
-	if (sdhci->data) {
-		if (sdhci->data->card_int_gpio >= 0) {
-			free_irq(gpio_to_irq(sdhci->data->card_int_gpio), pdev);
-			gpio_free(sdhci->data->card_int_gpio);
-		}
-
-		if (sdhci->data->card_power_gpio >= 0)
-			gpio_free(sdhci->data->card_power_gpio);
-	}
-
-	platform_set_drvdata(pdev, NULL);
-	dead = 0;
 	scratch = readl(host->ioaddr + SDHCI_INT_STATUS);
 	if (scratch == (u32)-1)
 		dead = 1;
 
 	sdhci_remove_host(host, dead);
-	iounmap(host->ioaddr);
+	clk_disable_unprepare(sdhci->clk);
 	sdhci_free_host(host);
-	clk_disable(sdhci->clk);
-	clk_put(sdhci->clk);
-	kfree(sdhci);
-	if (iomem)
-		release_mem_region(iomem->start, resource_size(iomem));
 
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int sdhci_suspend(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	struct spear_sdhci *sdhci = sdhci_priv(host);
+	int ret;
+
+	ret = sdhci_suspend_host(host);
+	if (!ret)
+		clk_disable(sdhci->clk);
+
+	return ret;
+}
+
+static int sdhci_resume(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	struct spear_sdhci *sdhci = sdhci_priv(host);
+	int ret;
+
+	ret = clk_enable(sdhci->clk);
+	if (ret) {
+		dev_dbg(dev, "Resume: Error enabling clock\n");
+		return ret;
+	}
+
+	return sdhci_resume_host(host);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(sdhci_pm_ops, sdhci_suspend, sdhci_resume);
+
+#ifdef CONFIG_OF
+static const struct of_device_id sdhci_spear_id_table[] = {
+	{ .compatible = "st,spear300-sdhci" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, sdhci_spear_id_table);
+#endif
+
 static struct platform_driver sdhci_driver = {
 	.driver = {
 		.name	= "sdhci",
 		.owner	= THIS_MODULE,
+		.pm	= &sdhci_pm_ops,
+		.of_match_table = of_match_ptr(sdhci_spear_id_table),
 	},
 	.probe		= sdhci_probe,
-	.remove		= __devexit_p(sdhci_remove),
+	.remove		= sdhci_remove,
 };
 
-static int __init sdhci_init(void)
-{
-	return platform_driver_register(&sdhci_driver);
-}
-module_init(sdhci_init);
-
-static void __exit sdhci_exit(void)
-{
-	platform_driver_unregister(&sdhci_driver);
-}
-module_exit(sdhci_exit);
+module_platform_driver(sdhci_driver);
 
 MODULE_DESCRIPTION("SPEAr Secure Digital Host Controller Interface driver");
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
 MODULE_LICENSE("GPL v2");